WorldWideScience

Sample records for human factors technical

  1. Technical issues related to NUREG 0800, Chapter 18: Human Factors Engineering/Standard Review Plan

    International Nuclear Information System (INIS)

    Savage, J.W.

    1982-01-01

    The revision of Chapter 18 of NUREG 0800, Human Factors Engineering Standard Review Plan (SRP) will be based on SECY 82-111 and guidance contained in NUREG 0700, NUREG 0801 and NUREG 0835, plus other references. In conducting field reviews of control rooms, the NRC has identified technical issues which can be used to enhance the development of the revised version of NUREG 0800, and to establish priorities among the list of possible Branch Technical Positions (BTP) in NUREG 0800, Rev. 0, Table 18.0-2. This report is a compilation of comments and suggestions from the people who used NUREG 0700 in the Control Room field reviews. This information was used to establish possible BTP topic priorities so that the most important BTPs could be issued first. The comments and suggestions are included for HFEB review in conjunction with the table of priorities

  2. Organizational factors influencing human performance in nuclear power plants. Report of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-05-01

    In 1991 a Safety Series report on Safety Culture of the International Nuclear Safety Advisory Group (INSAG) was published as 75-INSAG-4 by the IAEA. This report deals with the concept of Safety Culture as it relates to organizations and individuals involved in the operations of nuclear power plants (NPPs). Generally, the role of management and organization in assuring the safe operation of NPPs has been widely recognized and its importance accepted. However, the understanding of what constitutes effective management and organization the area of safety is less developed than the understanding of most of the technical issues which plant operators and regulatory bodies are confronted with. The Technical Committee meeting provided a forum for a broad exchange of information on practices and experiences in the area of organization and management to accomplish operational safety in NPPs and thus enhance Safety Culture. This report and the papers presented at the meeting discuss those factors which influence and improve human performance covering both aspects, i.e. the basic requirements imposed on the operator and the ways of managerial support which enhance the reliable and safety oriented performance of operators. Refs, figs, tabs

  3. Human and technical factors in the doses reduction and optimization at Cogema/Marcoule

    International Nuclear Information System (INIS)

    Bourgogne, J.L.

    1998-01-01

    In the case of Cogema/Marcoule, the constant decrease of radiation doses is attributed to three factors: technical with a surveillance system and doses optimization, relational with the promotion of confidence in teams of radiation protection services as an acceptation factor of radiation protection techniques and psychological with an evolution of minds towards the ALARA approach. (N.C.)

  4. Human Factors Analysis of Pipeline Monitoring and Control Operations: Final Technical Report

    Science.gov (United States)

    2008-11-26

    The purpose of the Human Factors Analysis of Pipeline Monitoring and Control Operations project was to develop procedures that could be used by liquid pipeline operators to assess and manage the human factors risks in their control rooms that may adv...

  5. Analysis of human factors effects on the safety of transporting radioactive waste materials: Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Abkowitz, M.D.; Abkowitz, S.B.; Lepofsky, M.

    1989-04-01

    This report examines the extent of human factors effects on the safety of transporting radioactive waste materials. It is seen principally as a scoping effort, to establish whether there is a need for DOE to undertake a more formal approach to studying human factors in radioactive waste transport, and if so, logical directions for that program to follow. Human factors effects are evaluated on driving and loading/transfer operations only. Particular emphasis is placed on the driving function, examining the relationship between human error and safety as it relates to the impairment of driver performance. Although multi-modal in focus, the widespread availability of data and previous literature on truck operations resulted in a primary study focus on the trucking mode from the standpoint of policy development. In addition to the analysis of human factors accident statistics, the report provides relevant background material on several policies that have been instituted or are under consideration, directed at improving human reliability in the transport sector. On the basis of reported findings, preliminary policy areas are identified. 71 refs., 26 figs., 5 tabs.

  6. Lessons Learned from Human Factor Technical Support for Nuclear Power Plants

    International Nuclear Information System (INIS)

    Jung, Yeon Sub; Song, Tae Young

    2011-01-01

    NETEC is on the frontier to support Korean nuclear power plants. Requests of service are distributed through web based system. Human factor requests are occasionally posted. This paper analyzes interesting human factors requests/responses serviced, and summarizes the lesson learned. Subjects of the service include man machine interface, equipment label, procedure writing, procedure adherence, BISI, hand switch and alarm tile. Specifically the man machine interface is related to control command generated by acknowledge button, arrangement of switches. Procedure writing is about how to write contingency actions with proper numbering scheme. BISI is analyzed in view of automation level. Alarm tile is about how to handle the common alarm tile originated from local alarm boards. These topics seem to be legacies of past technology. Even though there are still human engineering discrepancies, these have been less evaluated because the topics need knowledge of other field domains

  7. CSNI technical opinion papers no.10. The role of human and organisational factors in nuclear power plant modifications

    International Nuclear Information System (INIS)

    2009-01-01

    Nuclear power plant modifications may be needed for a number of different reasons. These include physical ageing of plant systems, structures and components; obsolescence in hardware and software; feedback from operating experience; and opportunities for improved plant safety, reliability or capability. However, experience has also shown that weaknesses in the design and/or implementation of modifications can present significant challenges to plant safety. They can also have a considerable impact on the commercial performance of the plant. It is therefore important that the plant modification process reflect a recognition of the potential impact of human errors and that it incorporate suitable measures to minimise the potential for such errors. In this context, the NEA Committee on the Safety of Nuclear Installations (CSNI) and its Working Group on Human and Organisational Factors organised an international workshop in 2003 to discuss the role of human and organisational performance in the nuclear plant modification process. This technical opinion paper represents the consensus of specialists in human and organisational factors (HOF) in the NEA member countries on commendable practices and approaches to dealing with nuclear plant modifications. It considers factors that should be taken into account when developing a modification process and identifies some lessons learnt from application of the process. The paper should be of particular interest of nuclear safety regulators and nuclear power plant operators. (author)

  8. Human Factors and Technical Considerations for a Computerized Operator Support System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Ulrich, Thomas Anthony [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Medema, Heather Dawne [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald Laurids [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Kenneth David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    A prototype computerized operator support system (COSS) has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, PI&D system representations, and a recommender module for mitigation actions. At this point, the prototype simulates an interface to a sensor validation module and a fault diagnosis module. These two modules will be fully integrated in the next version of the prototype. The initial version of the prototype is now operational at the Idaho National Laboratory using the U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) Human Systems Simulation Laboratory (HSSL). The HSSL is a full-scope, full-scale glass top simulator capable of simulating existing and future nuclear power plant main control rooms. The COSS is interfaced to the Generic Pressurized Water Reactor (gPWR) simulator with industry-typical control board layouts. The glass top panels display realistic images of the control boards that can be operated by touch gestures. A section of the simulated control board was dedicated to the COSS human-system interface (HSI), which resulted in a seamless integration of the COSS into the normal control room environment. A COSS demonstration scenario has been developed for the prototype involving the Chemical & Volume Control System (CVCS) of the PWR simulator. It involves a primary coolant leak outside of containment that would require tripping the reactor if not mitigated in a very short timeframe. The COSS prototype presents a series of operator screens that provide the needed information and soft controls to successfully mitigate the event.

  9. TECHNICAL CULTURE AND HUMAN AXJOSPHERE

    OpenAIRE

    ­Krystyna Chałas

    2014-01-01

    Technical culture is the value of each historical period. It is the subject of the ongoing development. While it is a value which is associated with different categories of values, mainly material, cognitive, social. Between culture and these three categories of values ​ there is a cognitive effect. Technical culture determines the quality of human axjosphere. The aim of this study is to show the relationships and dependencies between technical culture and the structures in which a person liv...

  10. Effects of Human Factors in Engineering and Design for Teaching Mathematics: A Comparison Study of Online and Face-to-Face at a Technical College

    Science.gov (United States)

    Mativo, John M.; Hill, Roger B.; Godfrey, Paul W.

    2013-01-01

    The focus of this study was to examine four characteristics for successful and unsuccessful students enrolled in basic mathematics courses at a technical college. The characteristics, considered to be in part effects of human factors in engineering and design, examined the preferred learning styles, computer information systems competency,…

  11. Human factoring administrative procedures

    International Nuclear Information System (INIS)

    Grider, D.A.; Sturdivant, M.H.

    1991-01-01

    In nonnuclear business, administrative procedures bring to mind such mundane topics as filing correspondence and scheduling vacation time. In the nuclear industry, on the other hand, administrative procedures play a vital role in assuring the safe operation of a facility. For some time now, industry focus has been on improving technical procedures. Significant efforts are under way to produce technical procedure requires that a validated technical, regulatory, and administrative basis be developed and that the technical process be established for each procedure. Producing usable technical procedures requires that procedure presentation be engineered to the same human factors principles used in control room design. The vital safety role of administrative procedures requires that they be just as sound, just a rigorously formulated, and documented as technical procedures. Procedure programs at the Tennessee Valley Authority and at Boston Edison's Pilgrim Station demonstrate that human factors engineering techniques can be applied effectively to technical procedures. With a few modifications, those same techniques can be used to produce more effective administrative procedures. Efforts are under way at the US Department of Energy Nuclear Weapons Complex and at some utilities (Boston Edison, for instance) to apply human factors engineering to administrative procedures: The techniques being adapted include the following

  12. Feasibility of developing a portable driver performance data acquisition system for human factors research: Technical tasks. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.J.; Barickman, F.S.; Spelt, P.F.; Schmoyer, R.L.; Kirkpatrick, J.R.

    1998-01-01

    A two-phase, multi-year research program entitled ``development of a portable driver performance data acquisition system for human factors research`` was recently completed. The primary objective of the project was to develop a portable data acquisition system for crash avoidance research (DASCAR) that will allow drive performance data to be collected using a large variety of vehicle types and that would be capable of being installed on a given vehicle type within a relatively short-time frame. During phase 1 a feasibility study for designing and fabricating DASCAR was conducted. In phase 2 of the research DASCAR was actually developed and validated. This technical memorandum documents the results from the feasibility study. It is subdivided into three volumes. Volume one (this report) addresses the last five items in the phase 1 research and the first issue in the second phase of the project. Volumes two and three present the related appendices, and the design specifications developed for DASCAR respectively. The six tasks were oriented toward: identifying parameters and measures; identifying analysis tools and methods; identifying measurement techniques and state-of-the-art hardware and software; developing design requirements and specifications; determining the cost of one or more copies of the proposed data acquisition system; and designing a development plan and constructing DASCAR. This report also covers: the background to the program; the requirements for the project; micro camera testing; heat load calculations for the DASCAR instrumentation package in automobile trunks; phase 2 of the research; the DASCAR hardware and software delivered to the National Highway Traffic Safety Administration; and crash avoidance problems that can be addressed by DASCAR.

  13. Impact of Personal Characteristics and Technical Factors on Quantification of Sodium 18F-Fluoride Uptake in Human Arteries

    DEFF Research Database (Denmark)

    Blomberg, Björn Alexander; Thomassen, Anders; de Jong, Pim A

    2015-01-01

    Sodium (18)F-fluoride ((18)F-NaF) PET/CT imaging is a promising imaging technique for assessment of atherosclerosis, but is hampered by a lack of validated quantification protocols. Both personal characteristics and technical factors can affect quantification of arterial (18)F-NaF uptake....... This study investigated if blood activity, renal function, injected dose, circulating time, and PET/CT system affect quantification of arterial (18)F-NaF uptake. METHODS: Eighty-nine healthy subjects were prospectively examined by (18)F-NaF PET/CT imaging. Arterial (18)F-NaF uptake was quantified...... assessed the effect of personal characteristics and technical factors on quantification of arterial (18)F-NaF uptake. RESULTS: NaFmax and TBRmax/mean were dependent on blood activity (β = .34 to .44, P

  14. TECHNICAL CULTURE AND HUMAN AXJOSPHERE

    Directory of Open Access Journals (Sweden)

    ­Krystyna Chałas

    2014-11-01

    Full Text Available Technical culture is the value of each historical period. It is the subject of the ongoing development. While it is a value which is associated with different categories of values, mainly material, cognitive, social. Between culture and these three categories of values ​ there is a cognitive effect. Technical culture determines the quality of human axjosphere. The aim of this study is to show the relationships and dependencies between technical culture and the structures in which a person lives and works. It is mainly about the answer to the question of which values of technical culture are closely related to and what are the inter dependencies? The primary task is to define the concept of the technical culture and to show its teaching essence. The second task boils down to indicate the range of values ​​inherent in the culture of technology, determining the value of the technological culture and values, which are developed by the technical culture. Indication of the interaction between the technical culture and values ​​is the third task.

  15. Resolution of digital instrumentation and control and human factors technical and regulatory issues for new plants and for modernization of operating plants

    International Nuclear Information System (INIS)

    Naser, J.A.; Torok, R.C.; Canavan, K.T.

    2008-01-01

    There are several technical and regulatory issues in the areas of digital I and C, human factors, and control rooms needing generic resolution. If they are not generically resolved, they can contribute to protracted regulatory reviews for operating plant license amendments and substantial delays and increased costs for new plant COL approvals. Therefore; a coordinated, proactive program has been established to resolve key issues. Both Industry and NRC have roles in resolving these key issues and addressing them in future design efforts and regulatory reviews. The Industry initiative is led by the NEI Digital I and C and Human Factors Working Group. NRC has established Task Working Groups under the NRC Digital I and C Steering Committee to address the issues and interact with Industry. EPRI is providing technical input and resolution leadership for some of the issues being addressed in three of the task working groups. For the Highly Integrated Control Room - Human Factors Task area, EPRI has taken the lead in developing draft industry position technical reports for the following three issues: 1) Minimum inventory of human system interfaces, 2) Computerized procedures and associated topics of automation and soft controls, and 3) Methodology to determine the acceptability of manual operator actions response times for a BTP 7-19 software common cause failure. For the Diversity and Defense-in-Depth area, EPRI has taken the lead in developing two draft industry position technical papers on the following topics: 1) Integrating defensive measures and diversity attributes to protect against digital common cause failures and 2) Susceptibility of digital devices and components to common cause failures. For the Risk Informing area, EPRI has taken the lead in developing two draft industry position technical papers on the following topics: 1) Clarifying how to use current methods to model digital systems in a PRA and 2) Application of PRA to specific digital I and C issues

  16. Human factors

    International Nuclear Information System (INIS)

    Brown, G.J.

    1991-01-01

    Recent reactor accidents have spurred the major review, described here, of the contribution of operator personnel to safety in Scottish Nuclear Power Stations. The review aims to identify factors leading to the Chernobyl accident and take preventative measures to avoid possible recurrence. Scottish Nuclear power stations aim to remove the operator from a position where failure to take correct action could lead to a safety hazard. Instead operators concentrate on routine and breakdown maintenance and measures are taken to minimize the probability of operator error. The review concluded that most safety procedures were satisfactory but safety analysis supported by good design practices may offer a significant reduction in the risk of operator error. (UK)

  17. Development of a procedure for qualitative and quantitative evaluation of human factors as a part of probabilistic safety assessments of nuclear power plants. Part B. Technical documentation

    International Nuclear Information System (INIS)

    Richei, A.

    1998-01-01

    As international studies have shown, accidents in plants are increasingly caused by combinations of technical failures and human errors. Therefore careful investigations of man-machine-interactions to determine human reliability are gaining importance worldwide. Regarding nuclear power plants such investigations are usually carried out within the scope of probabilistic safety assessments. A great number of procedures to evaluate human factors has been developed up to now. However, none of them is able to take into account the whole spectrum of requirements - as for instance transferability of date to other plants, analysis of weak points, and evaluation of cognitive tasks - for a complete and reliable probabilistic safety assessment. Based on an advanced model for a man-machine-system, the Human Error Rate Assessment and Optimizing System (HEROS) and a corresponding expert system of the same name are introduced. This expert system enables the quantification of human error probabilities for plant operator actions on the one hand and is also capable of providing quantitative statements regarding the optimization of man-machine-system in terms of human error probability minimization on the other one. Three relevant evaluation levels, i.e. 'Management Structure', 'Working Environment' and 'Man-Machine-Interface', are derived from a model of the man-machine-system. Linguistic variables are assigned to all performance shaping factors at these levels. These variables are used to establish a rule-based expert system. The knowledge bases of this system are represented by rules. Processing of these rules is carried out by means of the fuzzy set theory, after provision of relevant data for a particular personal action to be evaluated. This procedure enables a simple and effective use of ergonomic studies as the relevant database, which is also transferable to other plants with any design. The expert system consist in total of 16 rule bases in which all ascertainable and

  18. Human factors in training

    International Nuclear Information System (INIS)

    Dutton, J.W.; Brown, W.R.

    1981-01-01

    The Human Factors concept is a focused effort directed at those activities which require human involvement. Training is, by its nature, an activity totally dependent on the Human Factor. This paper identifies several concerns significant to training situations and discusses how Human Factor awareness can increase the quality of learning. Psychology in the training arena is applied Human Factors. Training is a method of communication represented by sender, medium, and receiver. Two-thirds of this communications model involves the human element directly

  19. Conceptual aspects: analyses law, ethical, human, technical, social factors of development ICT, e-learning and intercultural development in different countries setting out the previous new theoretical model and preliminary findings

    NARCIS (Netherlands)

    Kommers, Petrus A.M.; Smyrnova-Trybulska, Eugenia; Morze, Natalia; Issa, Tomayess; Issa, Theodora

    2015-01-01

    This paper, prepared by an international team of authors focuses on the conceptual aspects: analyses law, ethical, human, technical, social factors of ICT development, e-learning and intercultural development in different countries, setting out the previous and new theoretical model and preliminary

  20. Human Research Ethics Committees in Technical Universities

    NARCIS (Netherlands)

    Koepsell, D.R.; Brinkman, W.P.; Pont, S.C.

    2014-01-01

    Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although

  1. Human research ethics committees in technical universities.

    Science.gov (United States)

    Koepsell, David; Brinkman, Willem-Paul; Pont, Sylvia

    2014-07-01

    Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although mandated in the United States, the United Kingdom, Canada, and Australia, non-medical research involving humans need not receive ethics review in much of Europe, Asia, Latin America, and Africa. Our survey of the top 50 technical universities in the world shows that, where not specifically mandated by law, most technical universities do not employ ethics committees to review human studies. As the domains of basic and applied sciences expand, ethics committees are increasingly needed to guide and oversee all such research regardless of legal requirements. We offer as examples, from our experience as an ethics committee in a major European technical university, ways in which such a committee provides needed services and can help ensure more ethical studies involving humans outside the standard medical context. We provide some arguments for creating such committees, and in our supplemental article, we provide specific examples of cases and concerns that may confront technical, engineering, and design research, as well as outline the general framework we have used in creating our committee. © The Author(s) 2014.

  2. Technical Means for Human Communication

    OpenAIRE

    Fontolliet, P-G.

    1981-01-01

    Based on simplified models used by engineers for the design of telecommunication systems, an approach of the complex process of human communication is given. Some general concepts like information, analog/digital, noise, real time, network and information quality are introduced and commented.

  3. Assessment of the human factor in the quantification of technical system reliability taking into consideration cognitive-causal aspects. Partial project 2. Modeling of the human behavior for reliability considerations. Final report

    International Nuclear Information System (INIS)

    Jennerich, Marco; Imbsweiler, Jonas; Straeter, Oliver; Arenius, Marcus

    2015-03-01

    This report presents the findings of the project for the consideration of human factor in the quantification of the reliability of technical systems, taking into account cognitive-causal aspects concerning the modeling of human behavior of reliability issues (funded by the Federal Ministry of Economics and Technology; grant number 15014328). This project is part of a joint project with the University of Applied Sciences Zittau / Goerlitz for assessing the human factor in the quantification of the reliability of technical systems. The concern of the University of Applied Sciences Zittau / Goerlitz is the mathematical modeling of human reliability by means of a fuzzy set approach (grant number 1501432A). The part of the project presented here provides the necessary data basis for the evaluation of the mathematical modeling using fuzzy set approach. At the appropriate places in this report, the interfaces and data bases between the two projects are outlined accordingly. HRA-methods (Human Reliability Analysis) are an essential component to analyze the reliability of socio-technical systems. Various methods have been established and are used in different areas of application. The established HRA methods have been checked on their congruence. In particular the underlying models and their parameters such as performance-influencing factors and situational influences have been investigated. The elaborated parameters were combined into a hierarchical class structure. Cross-domain incidents were studied. The specific performance-influencing factors have been worked out and have been integrated into a cross-domain database. The dominant (critical) situational factors and their interactions within the event data were identified using the CAHR method (connectionism Assessment of Human Reliability). Task dependent cognitive load profiles have been defined. Within these profiles qualitative and quantitative data of the possibility of emergence of errors have been acquired. This

  4. Human factors of safety: a few landmarks

    International Nuclear Information System (INIS)

    Mosneron Dupin, F.

    1992-06-01

    This paper discusses factors to be taken into account, and methods to be used. It concludes that more realistic and positive conceptions of Human Factors should be developed, and that Human Factors should be addressed at the very beginning of any technical project

  5. Human factor reliability program

    International Nuclear Information System (INIS)

    Knoblochova, L.

    2017-01-01

    The human factor's reliability program was at Slovenske elektrarne, a.s. (SE) nuclear power plants. introduced as one of the components Initiatives of Excellent Performance in 2011. The initiative's goal was to increase the reliability of both people and facilities, in response to 3 major areas of improvement - Need for improvement of the results, Troubleshooting support, Supporting the achievement of the company's goals. The human agent's reliability program is in practice included: - Tools to prevent human error; - Managerial observation and coaching; - Human factor analysis; -Quick information about the event with a human agent; -Human reliability timeline and performance indicators; - Basic, periodic and extraordinary training in human factor reliability(authors)

  6. [Human factors in medicine].

    Science.gov (United States)

    Lazarovici, M; Trentzsch, H; Prückner, S

    2017-01-01

    The concept of human factors is commonly used in the context of patient safety and medical errors, all too often ambiguously. In actual fact, the term comprises a wide range of meanings from human-machine interfaces through human performance and limitations up to the point of working process design; however, human factors prevail as a substantial cause of error in complex systems. This article presents the full range of the term human factors from the (emergency) medical perspective. Based on the so-called Swiss cheese model by Reason, we explain the different types of error, what promotes their emergence and on which level of the model error prevention can be initiated.

  7. Triiodothyronine radioimmunoassay. Comparison of the different factors between two technics

    International Nuclear Information System (INIS)

    Gehin-Fouque, F.; Etling, N.; Pradelles, P.; Bornet, H.

    1980-01-01

    Triiodothyronine concentration was determined in human serum and in thyroid extracts by two radioimmunoassay technics. Both antibodies, radioactive T 3 , stable T 3 , protein-binding-hormone inhibitors, methods used to separate the free from the bound fractions were different. Each factor from a method was substituted to the homologue of the other method. The results occasionnally showed a variation of 32% in the first method and 50% in the second one. However the results gave a correct interpretation of the triiodothyronine values measured in human serum and in thyroid extracts [fr

  8. Human factors in aviation

    National Research Council Canada - National Science Library

    Salas, Eduardo; Maurino, Daniel E

    2010-01-01

    .... HFA offers a comprehensive overview of the topic, taking readers from the general to the specific, first covering broad issues, then the more specific topics of pilot performance, human factors...

  9. Human Factors Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose: The purpose of the Human Factors Laboratory is to further the understanding of highway user needs so that those needs can be incorporated in roadway design,...

  10. Introduction to human factors

    International Nuclear Information System (INIS)

    Winters, J.M.

    1988-03-01

    Some background is given on the field of human factors. The nature of problems with current human/computer interfaces is discussed, some costs are identified, ideal attributes of graceful system interfaces are outlined, and some reasons are indicated why it's not easy to fix the problems

  11. Factors Affecting Women Enrolment In Technical Institutions In Tanzania A Case Study Of Arusha Technical College

    OpenAIRE

    Glory B. Kaaya; Dr. Esther Waiganjo

    2015-01-01

    Abstract The purpose of this study was to investigate the factors affecting women enrolment in Technical Institutions in Tanzania by focusing on the women. The study examined in detail the factors affecting women enrolment in Technical institutions and Arusha Technical College in particular as well as exploring sexual dynamics within Technical Institutions. Moreover a number of theoretical frameworks were concerned basing on the objectives a case study design was employed involving both qua...

  12. Human factors information system

    International Nuclear Information System (INIS)

    Goodman, P.C.; DiPalo, C.A.

    1991-01-01

    Nuclear power plant safety is dependent upon human performance related to plant operations. To provide improvements in human performance, data collection and assessment play key roles. This paper reports on the Human factors Information System (HFIS) which is designed to meet the needs of the human factors specialists of the United States Nuclear Regulatory Commission. These specialists identify personnel errors and provide guidance designed to prevent such errors. HFIS is a simple and modular system designed for use on a personal computer. It is designed to contain four separate modules that provide information indicative of program or function effectiveness as well as safety-related human performance based on programmatic and performance data. These modules include the Human Factors Status module; the Regulatory Programs module; the Licensee Event Report module; and the Operator Requalification Performance module. Information form these modules can either be used separately or can be combined due to the integrated nature of the system. HFIS has the capability, therefore, to provide insights into those areas of human factors that can reduce the probability of events caused by personnel error at nuclear power plants and promote the health and safety of the public. This information system concept can be applied to other industries as well as the nuclear industry

  13. Economic Analysis of Factors Affecting Technical Efficiency of ...

    African Journals Online (AJOL)

    Economic Analysis of Factors Affecting Technical Efficiency of Smallholders ... socio-economic characteristics which influence technical efficiency in maize production. ... Ministry of Agriculture and livestock, records, books, reports and internet.

  14. Human factors guides

    International Nuclear Information System (INIS)

    Penington, J.

    1995-10-01

    This document presents human factors guides, which have been developed in order to provide licensees of the AECB with advice as to how to address human factors issues within the design and assessment process. This documents presents the results of a three part study undertaken to develop three guides which are enclosed in this document as Parts B, C and D. As part of the study human factors standards, guidelines, handbooks and other texts were researched, to define those which would be most useful to the users of the guides and for the production of the guides themselves. Detailed specifications were then produced to outline the proposed contents and format of the three guides. (author). 100 refs., 3 tabs., 11 figs

  15. Human factors guides

    Energy Technology Data Exchange (ETDEWEB)

    Penington, J [PHF Services Inc., (Canada)

    1995-10-01

    This document presents human factors guides, which have been developed in order to provide licensees of the AECB with advice as to how to address human factors issues within the design and assessment process. This documents presents the results of a three part study undertaken to develop three guides which are enclosed in this document as Parts B, C and D. As part of the study human factors standards, guidelines, handbooks and other texts were researched, to define those which would be most useful to the users of the guides and for the production of the guides themselves. Detailed specifications were then produced to outline the proposed contents and format of the three guides. (author). 100 refs., 3 tabs., 11 figs.

  16. Human Factors Review Plan

    International Nuclear Information System (INIS)

    Paramore, B.; Peterson, L.R.

    1985-12-01

    ''Human Factors'' is concerned with the incorporation of human user considerations into a system in order to maximize human reliability and reduce errors. This Review Plan is intended to assist in the assessment of human factors conditions in existing DOE facilities. In addition to specifying assessment methodologies, the plan describes techniques for improving conditions which are found to not adequately support reliable human performance. The following topics are addressed: (1) selection of areas for review describes techniques for needs assessment to assist in selecting and prioritizing areas for review; (2) human factors engineering review is concerned with optimizing the interfaces between people and equipment and people and their work environment; (3) procedures review evaluates completeness and accuracy of procedures, as well as their usability and management; (4) organizational interface review is concerned with communication and coordination between all levels of an organization; and (5) training review evaluates training program criteria such as those involving: trainee selection, qualification of training staff, content and conduct of training, requalification training, and program management

  17. Human Factors Review Plan

    Energy Technology Data Exchange (ETDEWEB)

    Paramore, B.; Peterson, L.R. (eds.)

    1985-12-01

    ''Human Factors'' is concerned with the incorporation of human user considerations into a system in order to maximize human reliability and reduce errors. This Review Plan is intended to assist in the assessment of human factors conditions in existing DOE facilities. In addition to specifying assessment methodologies, the plan describes techniques for improving conditions which are found to not adequately support reliable human performance. The following topics are addressed: (1) selection of areas for review describes techniques for needs assessment to assist in selecting and prioritizing areas for review; (2) human factors engineering review is concerned with optimizing the interfaces between people and equipment and people and their work environment; (3) procedures review evaluates completeness and accuracy of procedures, as well as their usability and management; (4) organizational interface review is concerned with communication and coordination between all levels of an organization; and (5) training review evaluates training program criteria such as those involving: trainee selection, qualification of training staff, content and conduct of training, requalification training, and program management.

  18. Human and Organizational Factors

    International Nuclear Information System (INIS)

    Eshiett, P.B.S.

    2016-01-01

    The Human and Organizational Factors Approach to Industrial Safety (HOFS) consists of identifying and putting in place conditions which encourage a positive contribution from operators (individually and in a team) with regards to industrial safety. The knowledge offered by the HOFS approach makes it possible better to understand what conditions human activity and to act on the design of occupational situations and the organization, in the aim of creating the conditions for safe work. Efforts made in this area can also lead to an improvement in results in terms of the quality of production or occupational safety (incidence and seriousness rates) (Daniellou, F., et al., 2011). Research on industrial accidents shows that they rarely happen as a result of a single event, but rather emerge from the accumulation of several, often seemingly trivial, malfunctions, misunderstandings, incorrect assumptions and other issues. The nuclear community has established rigorous international safety standards and concepts to ensure the protection of people and the environment from harmful effects of ionizing radiation (IAEA, 2014). A review of major human induced disasters in a number of countries and in different industries yields insights into several of the human and organizational factors involved in their occurrence. Some of these factors relate to failures in: • Design or technology; • Training; • Decision making; • Communication; • Preparation for the unexpected; • Understanding of organizational interdependencies

  19. Human factors challenges for advanced process control

    International Nuclear Information System (INIS)

    Stubler, W.F.; O'Hara, J..M.

    1996-01-01

    New human-system interface technologies provide opportunities for improving operator and plant performance. However, if these technologies are not properly implemented, they may introduce new challenges to performance and safety. This paper reports the results from a survey of human factors considerations that arise in the implementation of advanced human-system interface technologies in process control and other complex systems. General trends were identified for several areas based on a review of technical literature and a combination of interviews and site visits with process control organizations. Human factors considerations are discussed for two of these areas, automation and controls

  20. Analysis Of Human Capital Development In Technical Colleges In ...

    African Journals Online (AJOL)

    The study assessed the human capital development in Technical Colleges in Imo State of Nigeria. All the Technical Colleges in the State participated in the study. Results showed low enrollment in the Colleges. There was gender inequity in the enrollment as only 59 females (1.97%) enrolled in the Technical Colleges.

  1. Overview of EPRI's human factors research program

    International Nuclear Information System (INIS)

    O'Brien, J.F.; Parris, H.L.

    1981-01-01

    The human factors engineering program in the Nuclear Power Division, EPRI is dedicated to the resolution of man-machine interface problems specific to the nuclear power industry. Particularly emphasis is placed on the capabilities and limitations of the people who operate and maintain the system, the tasks they must perform, and what they need to accomplish those tasks. Six human factors R and D projects are being conducted at the present time. In addition, technical consultation is being furnished to a study area, operator aids, being funded by another program area outside the human factors program area. All of these activities are summarized

  2. Human factors analysis of incident/accident report

    International Nuclear Information System (INIS)

    Kuroda, Isao

    1992-01-01

    Human factors analysis of accident/incident has different kinds of difficulties in not only technical, but also psychosocial background. This report introduces some experiments of 'Variation diagram method' which is able to extend to operational and managemental factors. (author)

  3. Human factors in network security

    OpenAIRE

    Jones, Francis B.

    1991-01-01

    Human factors, such as ethics and education, are important factors in network information security. This thesis determines which human factors have significant influence on network security. Those factors are examined in relation to current security devices and procedures. Methods are introduced to evaluate security effectiveness by incorporating the appropriate human factors into network security controls

  4. Accidents and human factors

    International Nuclear Information System (INIS)

    Nishiwaki, Y.; Kawai, H.; Morishima, H.; Terano, T.; Sugeno, M.

    1984-01-01

    When the TMI accident occurred it was 4 a.m., an hour when the error potential of the operators would have been very high. The frequency of car and train accidents in Japan is also highest between 4 a.m. and 6 a.m. The error potential may be classified into five phases corresponding to the electroencephalogramic pattern (EEG). At phase 0, when the delta wave appears, a person is unconscious and in deep sleep; at phase I, when the theta wave appears, he is very tired, sleepy and subnormal; at phase II, when the alpha wave appears, he is normal, relaxed and passive; at phase III, when the beta wave appears, he is normal, clear-minded and active; at phase IV, when the strong beta or epileptic wave appears, he is hypernormal, excited and incapable of normal judgement. Should an accident occur at phase II, the brain condition may jump to phase IV. At this phase the error or accident potential is maximum. The response of the human brain to different types of noises and signals may vary somewhat for different individuals and for different groups of people. Therefore, the possibility that such differences in brain functions may influence the mental structure would be worthy of consideration in human factors and in the design of man-machine systems. Human reliability and performance would be affected by many factors: medical, physiological and psychological, etc. The uncertainty involved in human factors may not necessarily be probabilistic, but fuzzy. Therefore, it would be important to develop a theory by which both non-probabilistic uncertainties, or fuzziness, of human factors and the probabilistic properties of machines can be treated consistently. From the mathematical point of view, probabilistic measure is considered a special case of fuzzy measure. Therefore, fuzzy set theory seems to be an effective tool for analysing man-machine systems. To minimize human error and the possibility of accidents, new safety systems should not only back up man and make up for his

  5. Determinants of factors influencing technical efficiency of cocoa ...

    African Journals Online (AJOL)

    This study examined the factors influencing technical efficiency of cocoa production in Ondo State, Nigeria using a stochastic frontier production function. Using the random sampling technique, well-structured questionnaire were used to elicit information from 120 cocoa farmers in Ondo State, Nigeria. The mean technical ...

  6. Analysis of factors affecting the technical efficiency of cocoa ...

    African Journals Online (AJOL)

    The study estimated the technical efficiency of cocoa producers and the socioeconomic factors influencing technical efficiency and identified the constraints to cocoa production. A multi-stage random sampling method was used to select 180 cocoa farmers who were interviewed for the study. Data on the inputs used and ...

  7. Factors that Influence Women's Technical Skill Development in Outdoor Adventure

    Science.gov (United States)

    Warren, Karen; Loeffler, TA

    2006-01-01

    This article provides a theoretical foundation for understanding women's technical skill development (TSD) in outdoor adventure. An examination of societal and biological factors influencing women's TSD focuses on gender role socialization, sense of competence, technical conditioning, sexism, spatial ability, and risk-taking. The article suggests…

  8. CONTRIBUTING FACTORS TOWARDS DIFFICULTIES IN GENERATING IDEAS AMONG TECHNICAL STUDENTS

    OpenAIRE

    Yee Mei Heong

    2013-01-01

    Idea is a thought or collection of thoughts that are important to decision making and problem solving.  The purpose of this research was to analysis the factors contributing to difficulty in generating ideas among technical students.  A total of 375 technical students from four technical universities in Malaysia were randomly selected as samples.  A set of questionnaires was developed and used as research instrument.  The findings indicated that a total of 319 (85.1%) technical students faced...

  9. Technical and human considerations in establishing quality of supply objectives

    International Nuclear Information System (INIS)

    Fraser, J.C.

    1989-01-01

    The standard adopted for the quality of electrical supply ultimately determines the cost of the supply. Technical considerations prevent the achievement of perfect quality at any cost and high quality is gained usually only at high cost. Customer opinion ultimately determines acceptable quality and cost. However, gaining opinion data which is useful for system design is a task that must account for certain human characteristics which influence the reliability of data obtained from surveys. An overview is given of technical factors which limit the quality of supply and human nature impacts on opinion data. Power generation, generation design criteria, transmission system design criteria and subtransmission and distribution criteria for reliability of supply are discussed. Public opinion of electrical power quality is distorted by several influences. While electricity use is continuous, bills come periodically, and the time discrepancy is likely to inflate the perception of energy cost. Periods with low quality problems become expected as the norm, although to a certain degree memory of poor performance is more persistant than memory of good performance, moderating the effect. Costs customers are willing to bear to provide for improved performance are analyzed. 10 refs., 8 figs., 3 tabs

  10. Human and technical factors in the doses reduction and optimization at Cogema/Marcoule; Facteurs techniques et humains dans la reduction et l'optimisation des doses a Cogema/Marcoule

    Energy Technology Data Exchange (ETDEWEB)

    Bourgogne, J.L. [Cogema, 30 - Marcoule (France)

    1998-07-01

    In the case of Cogema/Marcoule, the constant decrease of radiation doses is attributed to three factors: technical with a surveillance system and doses optimization, relational with the promotion of confidence in teams of radiation protection services as an acceptation factor of radiation protection techniques and psychological with an evolution of minds towards the ALARA approach. (N.C.)

  11. Human Factors in Training

    Science.gov (United States)

    Barshi, Immanuel; Byrne, Vicky; Arsintescu, Lucia; Connell, Erin

    2010-01-01

    Future space missions will be significantly longer than current shuttle missions and new systems will be more complex than current systems. Increasing communication delays between crews and Earth-based support means that astronauts need to be prepared to handle the unexpected on their own. As crews become more autonomous, their potential span of control and required expertise must grow to match their autonomy. It is not possible to train for every eventuality ahead of time on the ground, or to maintain trained skills across long intervals of disuse. To adequately prepare NASA personnel for these challenges, new training approaches, methodologies, and tools are required. This research project aims at developing these training capabilities. By researching established training principles, examining future needs, and by using current practices in space flight training as test beds, both in Flight Controller and Crew Medical domains, this research project is mitigating program risks and generating templates and requirements to meet future training needs. Training efforts in Fiscal Year 09 (FY09) strongly focused on crew medical training, but also began exploring how Space Flight Resource Management training for Mission Operations Directorate (MOD) Flight Controllers could be integrated with systems training for optimal Mission Control Center (MCC) operations. The Training Task addresses Program risks that lie at the intersection of the following three risks identified by the Project: 1) Risk associated with poor task design; 2) Risk of error due to inadequate information; and 3) Risk associated with reduced safety and efficiency due to poor human factors design.

  12. Human Factors in Marine Casualties

    Directory of Open Access Journals (Sweden)

    Jelenko Švetak

    2002-05-01

    Full Text Available Human factors play an important role in the origin of accidents,and it is commonly claimed that between seventy andninety-five percent of industrial and transport accidents involvehuman factors, see Figure 1.Some authorities, however, claim that ultimately, all accidentsinvolve human factors.

  13. Human factors in agile manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Forsythe, C.

    1995-03-01

    As industries position themselves for the competitive markets of today, and the increasingly competitive global markets of the 21st century, agility, or the ability to rapidly develop and produce new products, represents a common trend. Agility manifests itself in many different forms, with the agile manufacturing paradigm proposed by the Iacocca Institute offering a generally accepted, long-term vision. In its many forms, common elements of agility or agile manufacturing include: changes in business, engineering and production practices, seamless information flow from design through production, integration of computer and information technologies into all facets of the product development and production process, application of communications technologies to enable collaborative work between geographically dispersed product development team members and introduction of flexible automation of production processes. Industry has rarely experienced as dramatic an infusion of new technologies or as extensive a change in culture and work practices. Human factors will not only play a vital role in accomplishing the technical and social objectives of agile manufacturing. but has an opportunity to participate in shaping the evolution of industry paradigms for the 21st century.

  14. Human factor analysis and preventive countermeasures in nuclear power plant

    International Nuclear Information System (INIS)

    Li Ye

    2010-01-01

    Based on the human error analysis theory and the characteristics of maintenance in a nuclear power plant, human factors of maintenance in NPP are divided into three different areas: human, technology, and organization. Which is defined as individual factors, including psychological factors, physiological characteristics, health status, level of knowledge and interpersonal skills; The technical factors including technology, equipment, tools, working order, etc.; The organizational factors including management, information exchange, education, working environment, team building and leadership management,etc The analysis found that organizational factors can directly or indirectly affect the behavior of staff and technical factors, is the most basic human error factor. Based on this nuclear power plant to reduce human error and measures the response. (authors)

  15. Development of human factors design review guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea)

    1997-10-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: 25. Human Factors Engineering Program Review Model and 26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation, which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents of NUREG-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994. (author). 12 refs., 5 figs., 2 tabs.

  16. Human and organizational factors in nuclear safety

    International Nuclear Information System (INIS)

    Garcia, A.; Barrientos, M.; Gil, B.

    2015-01-01

    Nuclear installations are socio technical systems where human and organizational factors, in both utilities and regulators, have a significant impact on safety. Three Mile Island (TMI) accident, original of several initiatives in the human factors field, nevertheless became a lost opportunity to timely acquire lessons related to the upper tiers of the system. Nowadays, Spanish nuclear installations have integrated in their processes specialists and activities in human and organizational factors, promoted by the licensees After many years of hard work, Spanish installations have achieved a better position to face new challenges, such as those posed by Fukushima. With this experience, only technology-centered action plan would not be acceptable, turning this accident in yet another lost opportunity. (Author)

  17. Waste - the human factor

    International Nuclear Information System (INIS)

    McLaren, D.J.

    1993-01-01

    Waste is a human concept, referring to things that have no use to human beings and arising entirely from human activities. It is the useless residue of any human process that affects the economy or environment. The changes brought about by the industrial revolution are enormous; fossil fuels, not just photosynthesis, now provide energy and wastes at rates far exceeding the capacity of the ecosystem to absorb or recycle. Three major problems face the Planet: accelerated population growth, accelerated use of resources for energy and industry, and the disproportionate use of resources and waste between the northern and southern parts of the Planet. Knowledge and science are in a position to provide both human creativity and the directed technology to take remedial action and rediscover harmony between nature and mankind. Only social and political will is lacking

  18. Human factors in safety and business management.

    Science.gov (United States)

    Vogt, Joachim; Leonhardt, Jorg; Koper, Birgit; Pennig, Stefan

    2010-02-01

    Human factors in safety is concerned with all those factors that influence people and their behaviour in safety-critical situations. In aviation these are, for example, environmental factors in the cockpit, organisational factors such as shift work, human characteristics such as ability and motivation of staff. Careful consideration of human factors is necessary to improve health and safety at work by optimising the interaction of humans with their technical and social (team, supervisor) work environment. This provides considerable benefits for business by increasing efficiency and by preventing incidents/accidents. The aim of this paper is to suggest management tools for this purpose. Management tools such as balanced scorecards (BSC) are widespread instruments and also well known in aviation organisations. Only a few aviation organisations utilise management tools for human factors although they are the most important conditions in the safety management systems of aviation organisations. One reason for this is that human factors are difficult to measure and therefore also difficult to manage. Studies in other domains, such as workplace health promotion, indicate that BSC-based tools are useful for human factor management. Their mission is to develop a set of indicators that are sensitive to organisational performance and help identify driving forces as well as bottlenecks. Another tool presented in this paper is the Human Resources Performance Model (HPM). HPM facilitates the integrative assessment of human factors programmes on the basis of a systematic performance analysis of the whole system. Cause-effect relationships between system elements are defined in process models in a first step and validated empirically in a second step. Thus, a specific representation of the performance processes is developed, which ranges from individual behaviour to system performance. HPM is more analytic than BSC-based tools because HPM also asks why a certain factor is

  19. Development of human factors design review guidelines

    International Nuclear Information System (INIS)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul

    1997-10-01

    The Objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, Human factors engineering program review model' and '26, Review criteria for human actors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides be ing performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents of NUREG-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we well update the guidelines by reviewing the literature related to alarm design published after 1994

  20. Human factors influencing decision making

    OpenAIRE

    Jacobs, Patricia A.

    1998-01-01

    This report supplies references and comments on literature that identifies human factors influencing decision making, particularly military decision making. The literature has been classified as follows (the classes are not mutually exclusive): features of human information processing; decision making models which are not mathematical models but rather are descriptive; non- personality factors influencing decision making; national characteristics influencing decision makin...

  1. The human factor in the nuclear industry

    International Nuclear Information System (INIS)

    Colas, Armand

    1998-01-01

    After having evoked the progressive reduction and stabilization of significant incidents occurring every year in French nuclear power plants, and the challenges faced by nuclear energy (loss of public confidence, loss of competitiveness), and then outlined the importance of safety to overcome these challenges, the author comments EDF's approach to the human factor. He first highlights the importance of information and communication towards the population. He briefly discusses the meaning of human factors for the nuclear industry, sometimes perceived as the contribution people to the company's safety and performance. He comments the evolution observed in the perception of human error in different industrial or technical environments and situations, and outlines what is at stake to reduce the production of faults and organize a 'hunt for latent defects'

  2. Gender factors influencing technical efficiency of cassava farmers in ...

    African Journals Online (AJOL)

    This work was therefore conducted in Akwa Ibom state to examine factors influencing the technical efficiency of farmer groups in cassava production. In carrying out the study, 120 respondents were randomly selected from two agricultural zones in the State and interviewed with interview schedule. Data were analyzed using ...

  3. The humaneness of our technical civilization

    International Nuclear Information System (INIS)

    Bieri, E.

    1981-01-01

    It is good facing our civilization with a critical distance. It keeps away self-complacency and hybris. What we need is a potential of renewal which must be raised by doubts and challenges. A critical distance is based on the determined approval of our civilization which tries to comply with mankind in a high degree. Civilization is the expression of a realistic picture of man. According to this view freedom shall only be possible because of continuous changes and changes are only possible if there is freedom. Propagating confidence in the undestroyable basic forces of human nature and thus enjoying the present as well as trusting the future: this is our message, our moral task. (orig./HP) [de

  4. Effectiveness of human factors simulator

    International Nuclear Information System (INIS)

    Moragas, F.

    2015-01-01

    En 2011, ANAV started the exploitation of the Human Factors Simulator installed in TECNATOM Training Center located in L'Hospital de L'Infant Tarragona. AVAN's Strategic Plan includes the Action Plan for the improvement of human behavior. The plan includes improving the efficiency of the efficiency of the human factors simulator. It is proposed to improve the efficiency into two different terms: winning effectiveness in modeling behaviors, and interweaving the activities in the simulator with the actual strategy of promoting Safety culture and human behaviour. (Author)

  5. US Nuclear Regulatory Commission human-factors program plan

    International Nuclear Information System (INIS)

    1983-08-01

    The purpose of the NRC Human Factors Program Plan is to ensure that proper consideration is given to human factors in the design, operation, and maintenance of nuclear facilities. This initial plan addresses nuclear power plants (NPP) and describes (1) the technical assistance and research activities planned to provide the technical bases for the resolution of the remaining human factors related tasks described in NUREG-0660, The NRC Action Plan Developed as a Result of the TMI-2 Accident, and NUREG-0737, Clarification of TMI Action Plan Requirements, and (2) the additional human factors efforts identified during implementation of the Action Plan that should receive NRC attention. The plan represents a systematic and comprehensive approach for addressing human factors concerns important to NPP safety in the FY-83 through FY-85 time frame

  6. Improving Safety through Human Factors Engineering.

    Science.gov (United States)

    Siewert, Bettina; Hochman, Mary G

    2015-10-01

    Human factors engineering (HFE) focuses on the design and analysis of interactive systems that involve people, technical equipment, and work environment. HFE is informed by knowledge of human characteristics. It complements existing patient safety efforts by specifically taking into consideration that, as humans, frontline staff will inevitably make mistakes. Therefore, the systems with which they interact should be designed for the anticipation and mitigation of human errors. The goal of HFE is to optimize the interaction of humans with their work environment and technical equipment to maximize safety and efficiency. Special safeguards include usability testing, standardization of processes, and use of checklists and forcing functions. However, the effectiveness of the safety program and resiliency of the organization depend on timely reporting of all safety events independent of patient harm, including perceived potential risks, bad outcomes that occur even when proper protocols have been followed, and episodes of "improvisation" when formal guidelines are found not to exist. Therefore, an institution must adopt a robust culture of safety, where the focus is shifted from blaming individuals for errors to preventing future errors, and where barriers to speaking up-including barriers introduced by steep authority gradients-are minimized. This requires creation of formal guidelines to address safety concerns, establishment of unified teams with open communication and shared responsibility for patient safety, and education of managers and senior physicians to perceive the reporting of safety concerns as a benefit rather than a threat. © RSNA, 2015.

  7. Human-centred Methods of Social and Technical Design

    DEFF Research Database (Denmark)

    Rasmussen, Lauge Baungaard

    Different inderstandings of design are presented.The historical background of human-centred designis described.Methods of social shaping are described in detailand the author's research experiences with using these methods in differentinternational projects presented and a model tointegrate...... technical and social perspective of design is suggested....

  8. Introduction to human factors engineering

    International Nuclear Information System (INIS)

    Derfuss, Ch.

    2010-01-01

    Some of the main aspects of human factors engineering are discussed. The following topics are considered: Integration into the design process; Identification and application of human-centered design requirements; Design of error-tolerant systems; Iterative process consisting of evaluations and feedback loops; Participation of operators/users; Utilization of an interdisciplinary design/ evaluation team; Documentation of the complete HFE-process: traceability

  9. Human factors in resuscitation teaching.

    Science.gov (United States)

    Norris, Elizabeth M; Lockey, Andrew S

    2012-04-01

    There is an increasing interest in human factors within the healthcare environment reflecting the understanding of their impact on safety. The aim of this paper is to explore how human factors might be taught on resuscitation courses, and improve course outcomes in terms of improved mortality and morbidity for patients. The delivery of human factors training is important and this review explores the work that has been delivered already and areas for future research and teaching. Medline was searched using MESH terms Resuscitation as a Major concept and Patient or Leadership as core terms. The abstracts were read and 25 full length articles reviewed. Critical incident reporting has shown four recurring problems: lack of organisation at an arrest, lack of equipment, non functioning equipment, and obstructions preventing good care. Of these, the first relates directly to the concept of human factors. Team dynamics for both team membership and leadership, management of stress, conflict and the role of debriefing are highlighted. Possible strategies for teaching them are discussed. Four strategies for improving human factors training are discussed: team dynamics (including team membership and leadership behaviour), the influence of stress, debriefing, and conflict within teams. This review illustrates how human factor training might be integrated further into life support training without jeopardising the core content and lengthening the courses. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  10. Disposal of mixed waste: Technical, institutional, and policy factors

    International Nuclear Information System (INIS)

    Waters, R.D.; Gruebel, M.M.; Letourneau, M.J.; Case, J.T.

    1996-01-01

    In conjunction with the affected States as part of their interactions required by the Federal Facilities Compliance Act, the Department of Energy has been developing a process for a disposal configuration for its mixed low-level waste (MLLW). This effort, spanning more than two years, has reduced the potential disposal sites from 49 to 15. The remaining 15 sites have been subjected to a performance evaluation to determine their strengths and weaknesses for disposal of MLLW. The process has included institutional and policy factors as well as strictly technical analyses, and technical analyses must be supported by technical analyses, and technical analyses must be performed within a framework which includes some institutional considerations, with the institutional considerations selected for inclusion largely a matter of policy. While the disposal configuration process is yet to be completed, the experience to date offers a viable approach for solving some of these issues. Additionally, several factors remain to be addressed before an MLLW disposal configuration can be developed

  11. Bringing organizational factors to the fore of human error management

    International Nuclear Information System (INIS)

    Embrey, D.

    1991-01-01

    Human performance problems account for more than half of all significant events at nuclear power plants, even when these did not necessarily lead to severe accidents. In dealing with the management of human error, both technical and organizational factors need to be taken into account. Most important, a long-term commitment from senior management is needed. (author)

  12. Radioimmunoassay of human Hageman factor (factor XII)

    International Nuclear Information System (INIS)

    Saito, H.; Ratnoff, O.D.; Pensky, J.

    1976-01-01

    A specific, sensitive, and reproducible radioimmunoassay for human Hageman factor (HF, factor XII) has been developed with purified human HF and monospecific rabbit antibody. Precise measurements of HF antigen were possible for concentrations as low as 0.1 percent of that in normal pooled plasma. A good correlation (correlation coefficient = 0.82) existed between the titers of HF measured by clot-promoting assays and radioimmunoassays among 42 normal adults. Confirming earlier studies, HF antigen was absent in Hageman trait plasma, but other congenital deficient plasmas, including those of individuals with Fletcher trait and Fitzgerald trait, contained normal amounts of HF antigen. HF antigen was reduced in the plasmas of patients with disseminated intravascular coagulation or advanced liver cirrhosis, but it was normal in those of patients with chronic renal failure or patients under treatment with warfarin. HF antigen was detected by this assay in plasmas of primates, but not detectable in plasmas of 11 nonprimate mammalian and one avian species

  13. Integrating Data and Networks: Human Factors

    Science.gov (United States)

    Chen, R. S.

    2012-12-01

    The development of technical linkages and interoperability between scientific networks is a necessary but not sufficient step towards integrated use and application of networked data and information for scientific and societal benefit. A range of "human factors" must also be addressed to ensure the long-term integration, sustainability, and utility of both the interoperable networks themselves and the scientific data and information to which they provide access. These human factors encompass the behavior of both individual humans and human institutions, and include system governance, a common framework for intellectual property rights and data sharing, consensus on terminology, metadata, and quality control processes, agreement on key system metrics and milestones, the compatibility of "business models" in the short and long term, harmonization of incentives for cooperation, and minimization of disincentives. Experience with several national and international initiatives and research programs such as the International Polar Year, the Group on Earth Observations, the NASA Earth Observing Data and Information System, the U.S. National Spatial Data Infrastructure, the Global Earthquake Model, and the United Nations Spatial Data Infrastructure provide a range of lessons regarding these human factors. Ongoing changes in science, technology, institutions, relationships, and even culture are creating both opportunities and challenges for expanded interoperability of scientific networks and significant improvement in data integration to advance science and the use of scientific data and information to achieve benefits for society as a whole.

  14. Pareto analysis of critical factors affecting technical institution evaluation

    Directory of Open Access Journals (Sweden)

    Victor Gambhir

    2012-08-01

    Full Text Available With the change of education policy in 1991, more and more technical institutions are being set up in India. Some of these institutions provide quality education, but others are merely concentrating on quantity. These stakeholders are in a state of confusion about decision to select the best institute for their higher educational studies. Although various agencies including print media provide ranking of these institutions every year, but their results are controversial and biased. In this paper, the authors have made an endeavor to find the critical factors for technical institution evaluation from literature survey. A Pareto analysis has also been performed to find the intensity of these critical factors in evaluation. This will not only help the stake holders in taking right decisions but will also help the management of institutions in benchmarking for identifying the most important critical areas to improve the existing system. This will in turn help Indian economy.

  15. A framework for human factors

    International Nuclear Information System (INIS)

    Webb, R.D.G.

    As the complexity of industrial systems increases, the need for efficient integration of human beings into the systems that they design and operate grows more important. Human factors, or ergonomics, is concerned with the application of life science knowledge about human characteristics to maximise performance and well-being in any context. The most complex problem is to identify job demands in terms of different human dimensions and to apply established life science knowledge to determine optimum solutions. This requires the cooperation of many specialists

  16. Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry - Nonparametric Approach

    Science.gov (United States)

    Phuong, Vu Hung

    2018-03-01

    This research applies Data Envelopment Analysis (DEA) approach to analyze Total Factor Productivity (TFP) and efficiency changes in Vietnam coal mining industry from 2007 to 2013. The TFP of Vietnam coal mining companies decreased due to slow technological progress and unimproved efficiency. The decadence of technical efficiency in many enterprises proved that the coal mining industry has a large potential to increase productivity through technical efficiency improvement. Enhancing human resource training, technology and research & development investment could help the industry to improve efficiency and productivity in Vietnam coal mining industry.

  17. Technical intelligence and culture: Nut cracking in humans and chimpanzees.

    Science.gov (United States)

    Boesch, Christophe; Bombjaková, Daša; Boyette, Adam; Meier, Amelia

    2017-06-01

    According to the technical intelligence hypothesis, humans are superior to all other animal species in understanding and using tools. However, the vast majority of comparative studies between humans and chimpanzees, both proficient tool users, have not controlled for the effects of age, prior knowledge, past experience, rearing conditions, or differences in experimental procedures. We tested whether humans are superior to chimpanzees in selecting better tools, using them more dexteriously, achieving higher performance and gaining access to more resource as predicted under the technical intelligence hypothesis. Aka and Mbendjele hunter-gatherers in the rainforest of Central African Republic and the Republic of Congo, respectively, and Taï chimpanzees in the rainforest of Côte d'Ivoire were observed cracking hard Panda oleosa nuts with different tools, as well as the soft Coula edulis and Elaeis guinensis nuts. The nut-cracking techniques, hammer material selection and two efficiency measures were compared. As predicted, the Aka and the Mbendjele were able to exploit more species of hard nuts in the forest than chimpanzees. However, the chimpanzees were sometimes more efficient than the humans. Social roles differed between the two species, with the Aka and especially the Mbendjele exhibiting cooperation between nut-crackers whereas the chimpanzees were mainly individualistic. Observations of nut-cracking by humans and chimpanzees only partially supported the technical intelligence hypothesis as higher degrees of flexibility in tool selection seen in chimpanzees compensated for use of less efficient tool material than in humans. Nut cracking was a stronger social undertaking in humans than in chimpanzees. © 2017 Wiley Periodicals, Inc.

  18. U.S. Nuclear Regulatory Commission human factors program plan

    International Nuclear Information System (INIS)

    1986-04-01

    The purpose of the U.S. Nuclear Regulatory Commission (NRC) Human Factors Program Plan is to ensure that proper consideration is given to human factors in the design and operation of nuclear facilities. This revised plan addresses human factors issues related to the operation of nuclear power plants (NPPs). The three issues of concern are (1) the activities planned to provide the technical bases to resolve the remaining tasks related to human factors as described in NUREG-0660, The NRC Action Plan Developed as a Result of the TMI-2 Accident, and NUREG-0737, Clarification of TMI Action Plan Requirements; (2) the need to address the additional human factors efforts that were identified during implementation of the Action Plan; and (3) the actual fulfillment of those developmental activities specified in Revision 1 of this plan. The plan represents a systematic approach for addressing high priority human factors concerns important to NPP safety in FY 1986 through 1987

  19. Technical energy savings versus changes in human behaviour

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    1996-01-01

    Energy savings seems to be the most environmentally benign element in an energy policy. The paper is a reflection on the work on saving energy both by improving technology and by adapting human daily behaviour. A simple model is suggested for the energy chain which converts the primary energy all...... the way into human satisfaction via energy services. Results of various analyses and field experiments show saving potentials for electricity of 50 - 80 per cents. Barriers for implementing these technical saving options are discussed. Also the necessity and potentials for changing behavioural or life...

  20. Human factors in nuclear power plant operation

    International Nuclear Information System (INIS)

    Sabri, Z.A.; Husseiny, A.A.

    1980-01-01

    An extensive effort is being devoted to developing a comprehensive human factor program that encompasses establishment of a data base for human error prediction using past operation experience in commercial nuclear power plants. Some of the main results of such an effort are reported including data retrieval and classification systems which have been developed to assist in estimation of operator error rates. Also, statistical methods are developed to relate operator error data to reactor type, age, and specific technical design features. Results reported in this paper are based on an analysis of LER's covering a six-year period for LWR's. Developments presently include a computer data management program, statistical model, and detailed error taxonomy

  1. Human System Simulation in Support of Human Performance Technical Basis at NPPs

    Energy Technology Data Exchange (ETDEWEB)

    David Gertman; Katya Le Blanc; alan mecham; william phoenix; Magdy Tawfik; Jeffrey Joe

    2010-06-01

    This paper focuses on strategies and progress toward establishing the Idaho National Laboratory’s (INL’s) Human Systems Simulator Laboratory at the Center for Advanced Energy Studies (CAES), a consortium of Idaho State Universities. The INL is one of the National Laboratories of the US Department of Energy. One of the first planned applications for the Human Systems Simulator Laboratory is implementation of a dynamic nuclear power plant simulation (NPP) where studies of operator workload, situation awareness, performance and preference will be carried out in simulated control rooms including nuclear power plant control rooms. Simulation offers a means by which to review operational concepts, improve design practices and provide a technical basis for licensing decisions. In preparation for the next generation power plant and current government and industry efforts in support of light water reactor sustainability, human operators will be attached to a suite of physiological measurement instruments and, in combination with traditional Human Factors Measurement techniques, carry out control room tasks in simulated advanced digital and hybrid analog/digital control rooms. The current focus of the Human Systems Simulator Laboratory is building core competence in quantitative and qualitative measurements of situation awareness and workload. Of particular interest is whether introduction of digital systems including automated procedures has the potential to reduce workload and enhance safety while improving situation awareness or whether workload is merely shifted and situation awareness is modified in yet to be determined ways. Data analysis is carried out by engineers and scientists and includes measures of the physical and neurological correlates of human performance. The current approach supports a user-centered design philosophy (see ISO 13407 “Human Centered Design Process for Interactive Systems, 1999) wherein the context for task performance along with the

  2. Technical Challenges in the Derivation of Human Pluripotent Cells

    Directory of Open Access Journals (Sweden)

    Parinya Noisa

    2011-01-01

    Full Text Available It has long been discovered that human pluripotent cells could be isolated from the blastocyst state of embryos and called human embryonic stem cells (ESCs. These cells can be adapted and propagated indefinitely in culture in an undifferentiated manner as well as differentiated into cell representing the three major germ layers: endoderm, mesoderm, and ectoderm. However, the derivation of human pluripotent cells from donated embryos is limited and restricted by ethical concerns. Therefore, various approaches have been explored and proved their success. Human pluripotent cells can also be derived experimentally by the nuclear reprogramming of somatic cells. These techniques include somatic cell nuclear transfer (SCNT, cell fusion and overexpression of pluripotent genes. In this paper, we discuss the technical challenges of these approaches for nuclear reprogramming, involving their advantages and limitations. We will also highlight the possible applications of these techniques in the study of stem cell biology.

  3. Human Factors in Financial Trading

    Science.gov (United States)

    Leaver, Meghan; Reader, Tom W.

    2016-01-01

    Objective This study tests the reliability of a system (FINANS) to collect and analyze incident reports in the financial trading domain and is guided by a human factors taxonomy used to describe error in the trading domain. Background Research indicates the utility of applying human factors theory to understand error in finance, yet empirical research is lacking. We report on the development of the first system for capturing and analyzing human factors–related issues in operational trading incidents. Method In the first study, 20 incidents are analyzed by an expert user group against a referent standard to establish the reliability of FINANS. In the second study, 750 incidents are analyzed using distribution, mean, pathway, and associative analysis to describe the data. Results Kappa scores indicate that categories within FINANS can be reliably used to identify and extract data on human factors–related problems underlying trading incidents. Approximately 1% of trades (n = 750) lead to an incident. Slip/lapse (61%), situation awareness (51%), and teamwork (40%) were found to be the most common problems underlying incidents. For the most serious incidents, problems in situation awareness and teamwork were most common. Conclusion We show that (a) experts in the trading domain can reliably and accurately code human factors in incidents, (b) 1% of trades incur error, and (c) poor teamwork skills and situation awareness underpin the most critical incidents. Application This research provides data crucial for ameliorating risk within financial trading organizations, with implications for regulation and policy. PMID:27142394

  4. HUMAN PROSTATE CANCER RISK FACTORS

    Science.gov (United States)

    Prostate cancer has the highest prevalence of any non-skin cancer in the human body, with similar likelihood of neoplastic foci found within the prostates of men around the world regardless of diet, occupation, lifestyle, or other factors. Essentially all men with circulating an...

  5. Human Factor in Therapeutic Relationship

    Directory of Open Access Journals (Sweden)

    Ramazan Akdogan

    2011-03-01

    Full Text Available herapeutic relationship is a professional relationship that has been structured based on theoretical props. This relationship is a complicated, wide and unique relationship which develops between two people, where both sides' personality and attitudes inevitably interfere. Therapist-client relationship experienced through transference and counter transference, especially in psychodynamic approaches, is accepted as the main aspect of therapeutic process. However, the approaches without dynamic/deterministic tendency also take therapist-client relationship into account seriously and stress uniqueness of interaction between two people. Being a person and a human naturally sometimes may negatively influence the relationship between the therapist and client and result in a relationship going out of the theoretical frame at times. As effective components of a therapeutic process, the factors that stem from being human include the unique personalities of the therapist and the client, their values and their attitude either made consciously or subconsciously. Literature has shown that the human-related factors are too effective to be denied in therapeutic relationship process. Ethical and theoretical knowledge can be inefficient to prevent the negative effects of these factors in therapeutic process at which point a deep insight and supervision would have a critical role in continuing an acceptable therapeutic relationship. This review is focused on the reflection of some therapeutic factors resulting from being human and development of counter transference onto the therapeutic process.

  6. Human Factors in Space Exploration

    Science.gov (United States)

    Jones, Patricia M.; Fiedler, Edna

    2010-01-01

    The exploration of space is one of the most fascinating domains to study from a human factors perspective. Like other complex work domains such as aviation (Pritchett and Kim, 2008), air traffic management (Durso and Manning, 2008), health care (Morrow, North, and Wickens, 2006), homeland security (Cooke and Winner, 2008), and vehicle control (Lee, 2006), space exploration is a large-scale sociotechnical work domain characterized by complexity, dynamism, uncertainty, and risk in real-time operational contexts (Perrow, 1999; Woods et ai, 1994). Nearly the entire gamut of human factors issues - for example, human-automation interaction (Sheridan and Parasuraman, 2006), telerobotics, display and control design (Smith, Bennett, and Stone, 2006), usability, anthropometry (Chaffin, 2008), biomechanics (Marras and Radwin, 2006), safety engineering, emergency operations, maintenance human factors, situation awareness (Tenney and Pew, 2006), crew resource management (Salas et aI., 2006), methods for cognitive work analysis (Bisantz and Roth, 2008) and the like -- are applicable to astronauts, mission control, operational medicine, Space Shuttle manufacturing and assembly operations, and space suit designers as they are in other work domains (e.g., Bloomberg, 2003; Bos et al, 2006; Brooks and Ince, 1992; Casler and Cook, 1999; Jones, 1994; McCurdy et ai, 2006; Neerincx et aI., 2006; Olofinboba and Dorneich, 2005; Patterson, Watts-Perotti and Woods, 1999; Patterson and Woods, 2001; Seagull et ai, 2007; Sierhuis, Clancey and Sims, 2002). The human exploration of space also has unique challenges of particular interest to human factors research and practice. This chapter provides an overview of those issues and reports on sorne of the latest research results as well as the latest challenges still facing the field.

  7. Human Leptospirosis and risk factors.

    Directory of Open Access Journals (Sweden)

    Yanelis Emilia Tabío Henry

    2010-09-01

    Full Text Available The human leptospirosis is a zoonosis of world distribution, were risk factors exist that have favored the wild and domestic animal propagation and so man. A descpitive investigation was made with the objective of determining the behavior of risk factors in outpatients by human leptospirosis in “Camilo Cienfuegos“ University General Hospital from Sncti Spíritus In the comprised time period betwen december 1 st and 3 st , 2008.The sample of this study was conformed by 54 risk persons that keep inclusion criteria. Some variables were used:age, sex, risk factors and number of ill persons, according to the month. Some patients of masculine sex prevailed (61,9%, group of ages between 15-29 and 45-59 years (27,7%, patients treated since october to december (53,7%, the direct and indirect contact with animals (46,2 %. The risk factors cassually associated to human leptospirosis turned to be: the masculine sex, the contac with animals, the occupational exposition and the inmersion on sources of sweet water.

  8. Role of human factors in system safety

    International Nuclear Information System (INIS)

    Brooks, D. M.; Robert, C.; Graham, T.

    2008-01-01

    What happens when technology goes wrong? Three Mile Island, Chernobyl, space shuttles Challenger and Columbia, numerous airplane crashes, and other notable and newsworthy as well as many more incidents that are not reported on the news, have all been attributed to human error. Millions of dollars in fines are levied against industry under the General Duty clause for ergonomic violations, all avoidable. These incidents and situations indicate a lack of consideration for the humans in the system during the design phase. As a consequence, all of these organizations had to retrofit, had to redesign and had to pay countless dollars for medical costs, Worker's Compensation, OSHA fines and in some instances had irrecoverable damage to their public image. Human Factors, otherwise known as Engineering Psychology or Ergonomics, found its origins in loss, loss of life, loss of confidence, loss of technology, loss of property. Without loss, there would be no need for human factors. No one really 'attends' to discomfort...nor are errors attended to that have little consequence. Often it is ultimately the compilation and cumulative effects of these smaller and often ignored occurrences that lead to the bigger and more tragic incidents that make the evening news. When an incident or accident occurs, they are frequently attributed to accomplished, credible, experienced people. In reality however, the crisis was inevitable when a series of events happen such that a human is caught in the whirlwind of accident sequence. The world as known is becoming smaller and more complex. Highly technical societies have been hard at work for several centuries rebuilding the world out of cold steel that is very far removed from ancient instincts and traditions and is becoming more remote to human users. The growth of technology is more than exponential, and is virtually beyond comprehension for many people. Humans, feeling comfortable with the familiar, fulfill their propensity to implement new

  9. Human Factors and Medical Devices

    International Nuclear Information System (INIS)

    Dick Sawyer

    1998-01-01

    Medical device hardware- and software-driven user interfaces should be designed to minimize the likelihood of use-related errors and their consequences. The role of design-induced errors in medical device incidents is attracting widespread attention. The U.S. Food and Drug Administration (FDA) is fully cognizant that human factors engineering is critical to the design of safe medical devices, and user interface design is receiving substantial attention by the agency. Companies are paying more attention to the impact of device design, including user instructions, upon the performance of those health professionals and lay users who operate medical devices. Concurrently, the FDA is monitoring human factors issues in its site inspections, premarket device approvals, and postmarket incident evaluations. Overall, the outlook for improved designs and safer device operation is bright

  10. Human factors reliability Benchmark exercise

    International Nuclear Information System (INIS)

    Poucet, A.

    1989-06-01

    The Joint Research Centre of the European Commission has organized a Human Factors Reliability Benchmark Exercise (HF-RBE) with the aim of assessing the state of the art in human reliability modelling and assessment. Fifteen teams from eleven countries, representing industry, utilities, licensing organisations and research institutes, participated in the HF-RBE. The HF-RBE was organized around two study cases: (1) analysis of routine functional Test and Maintenance (T and M) procedures: with the aim of assessing the probability of test induced failures, the probability of failures to remain unrevealed and the potential to initiate transients because of errors performed in the test; (2) analysis of human actions during an operational transient: with the aim of assessing the probability that the operators will correctly diagnose the malfunctions and take proper corrective action. This report contains the final summary reports produced by the participants in the exercise

  11. Theoretical Fundamentals of Human Factor

    OpenAIRE

    Nicoleta Maria Ienciu

    2012-01-01

    The purpose of this paper is to identify the theoretical approaches presented by the literature on the human factor. In order to achieve such objective we have performed a qualitative research by analyzing the content of several papers published in internationally renowned journals, classified according to the list of journals' ranking provided by the Association of Business Schools (UK), in relation to the theories that have been approached within it. Our findings suggest that from all ident...

  12. Human factors in waste management

    International Nuclear Information System (INIS)

    Moray, N.

    1994-01-01

    This article examines the role of human factors in radioactive waste management. Although few problems and ergonomics are special to radioactive waste management, some problems are unique especially with long term storage. The entire sociotechnical system must be looked at in order to see where improvement can take place because operator errors, as seen in Chernobyl and Bhopal, are ultimately the result of management errors

  13. Human factors in RBNK plants

    International Nuclear Information System (INIS)

    Demitrack, T.

    1995-01-01

    The Safety of RBMK nuclear power plants in the Russian Federation, The Ukraine and Lithuanian is a topic of concern to the European Union and other Western European countries. The European Commission, Sweden, Finland and Canada financed the project Safety Design Solutions and Operation of NPP with RBMK Reactors. The project examined nine issues and recommended safety improvements which will form the basis of future European Commission spending on these power plants. During its year of work, the project examined these issues: 1. Systems Engineering and progression of accidents 2. Protection System 3. Core Physics 4. External Events 5. Engineering Quality 6. Operating Experience 7. Human Factors 8. Regulatory Interface 9. Probabilistic Safety analysis Empresarios Agrupados, in collaboration with other western European firms, the Russian Federation and Lithuanian took part in two of these groups, Human Factors and Probabilistic Safety Analysis. This presentation gives a brief description of the most important aspects of human factors in RBMK plants, focusing on operations organization, training and education

  14. Balancing human and technical reliability in the design of advanced nuclear reactors

    International Nuclear Information System (INIS)

    Papin, Bernard

    2011-01-01

    Highlights: ► Human factors exigencies are often overseen during the early design phases of NPP. ► Optimization of reactors safety is only based on technical reliability considerations. ► The search for more technical reliability often leads to more system complexity. ► System complexity is a major contributor to the operator's poor performance. ► Our method enables to assess plant complexity and it's impact on human performance. - Abstract: The strong influence of human factors (HF) on the safety of nuclear facilities is nowadays recognised and the designers are now enforced to consider HF requirements in the design of new facilities. Yet, this consideration of human factors requirements is still more or less restricted to the latest phases of the projects, essentially for the design of human-system interfaces (HSI's) and control rooms, although the design options influencing at most the human performance in operation are indeed fixed during the very early phases of the new reactors projects. The main reason of this late consideration of HF is that there exist few methods and models for anticipating the influence of fundamental design options on the future performance of operation teams. This paper describes a set of new tools permitting (i) determination of the impact of the fundamental process design options on the future activity of the operation teams and (ii) assessment of the influence of these operational constraints on teams performance. These tools are intended to guide the design of future 4th generation (GEN4) reactors, within the frame of a global risk-informed design approach, considering technical and human reliability exigencies in a balanced way.

  15. Punctuation as readability and textuality factor in technical discourse

    Directory of Open Access Journals (Sweden)

    Carmen Sancho Guinda

    2002-04-01

    Full Text Available This paper studies the incidence of punctuation on the reading comprehension of technical discourse and its role as a factor of textuality. Starting out from the notions of textuality and punctuation functions formulated by different linguistic approaches, an analysis has been made to quantify the decoding skills and punctuating competence of 60 Aeronautical Engineering students, as well as to determine the nature and effects of their punctuation errors. The survey has been focused on the Full Stop, the comma and the hyphen due to their highly conflicting uses as regards the identification of immediate sentence constituents and semantic relationships. The results obtained suggest that most students have a poor knowledge of punctuation rules and little awareness of punctuation as a textual elementaffecting readability. Errors are in the main related to comma use and produced by transference, either of Spanish punctuating habits into English, or of individual prosodic patterns into writing, while meaning appears to be the prevailing punctuating criterion over sound and syntax. Punctuation proves an effective tool for the anticipation of implicit meanings and an untapped resource in the teaching of the diverse communicative and stylistic possibilities offered by technical texts.

  16. Trefoil factors in human milk

    DEFF Research Database (Denmark)

    Vestergaard, Else Marie; Nexø, Ebba; Wendt, A

    2008-01-01

    We measured concentrations of the gastrointestinal protective peptides Trefoil factors in human milk. By the use of in-house ELISA we detected high amounts of TFF3, less TFF1 and virtually no TFF2 in human breast milk obtained from 46 mothers with infants born extremely preterm (24-27 wk gestation......), preterm (28-37 wk gestation), and full term (38-42 wk gestation). Samples were collected during the first, second, third to fourth weeks and more than 4 wks postpartum. Median (range) TFF1 [TFF3] concentrations in human milk were 320 (30-34000) [1500 (150-27,000)] pmol/L in wk 1, 120 (30-720) [310 (50......-7100)] pmol/L in wk 2, 70 (20-670) [120 (20-650)] pmol/L in wks 3 to 4, and 60 (30-2500) [80 (20-540)] pmol/L in > 4 wks after delivery. The lowest concentrations of TFF1 and TFF3 were found later than 2 wks after birth. In conclusion, TFF was present in term and preterm human milk with rapidly declining...

  17. Human factors reliability benchmark exercise

    International Nuclear Information System (INIS)

    Poucet, A.

    1989-08-01

    The Joint Research Centre of the European Commission has organised a Human Factors Reliability Benchmark Exercise (HF-RBE) with the aim of assessing the state of the art in human reliability modelling and assessment. Fifteen teams from eleven countries, representing industry, utilities, licensing organisations and research institutes, participated in the HF-RBE. The HF-RBE was organised around two study cases: (1) analysis of routine functional Test and Maintenance (TPM) procedures: with the aim of assessing the probability of test induced failures, the probability of failures to remain unrevealed and the potential to initiate transients because of errors performed in the test; (2) analysis of human actions during an operational transient: with the aim of assessing the probability that the operators will correctly diagnose the malfunctions and take proper corrective action. This report summarises the contributions received from the participants and analyses these contributions on a comparative basis. The aim of this analysis was to compare the procedures, modelling techniques and quantification methods used, to obtain insight in the causes and magnitude of the variability observed in the results, to try to identify preferred human reliability assessment approaches and to get an understanding of the current state of the art in the field identifying the limitations that are still inherent to the different approaches

  18. Human Factors Engineering Aspects of Modifications in Control Room Modernization

    Energy Technology Data Exchange (ETDEWEB)

    Hugo, Jacques [Idaho National Lab. (INL), Idaho Falls, ID (United States); Clefton, Gordon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-06-01

    This report describes the basic aspects of control room modernization projects in the U.S. nuclear industry and the need for supplementary guidance on the integration of human factors considerations into the licensing and regulatory aspects of digital upgrades. The report pays specific attention to the integration of principles described in NUREG-0711 (Human Factors Engineering Program Review Model) and how supplementary guidance can help to raise general awareness in the industry regarding the complexities of control room modernization projects created by many interdependent regulations, standards and guidelines. The report also describes how human factors engineering principles and methods provided by various resources and international standards can help in navigating through the process of licensing digital upgrades. In particular, the integration of human factors engineering guidance and requirements into the process of licensing digital upgrades can help reduce uncertainty related to development of technical bases for digital upgrades that will avoid the introduction of new failure modes.

  19. Habitability and Human Factors Contributions to Human Space Flight

    Science.gov (United States)

    Sumaya, Jennifer Boyer

    2011-01-01

    This slide presentation reviews the work of the Habitability and Human Factors Branch in support of human space flight in two main areas: Applied support to major space programs, and Space research. The field of Human Factors applies knowledge of human characteristics for the design of safer, more effective, and more efficient systems. This work is in several areas of the human space program: (1) Human-System Integration (HSI), (2) Orion Crew Exploration Vehicle, (3) Extravehicular Activity (EVA), (4) Lunar Surface Systems, (5) International Space Station (ISS), and (6) Human Research Program (HRP). After detailing the work done in these areas, the facilities that are available for human factors work are shown.

  20. Technical change and total factor productivity growth: the case of Chinese provinces

    OpenAIRE

    Heshmati, Almas; Kumbhakar, Subal C.

    2010-01-01

    In the literature technical change is mostly assumed to be exogenous and specified as a function of time. However, some exogenous external factors other than time can also affect technical change. In this paper we model technical change via time trend (purely external non-economic) as well as other exogenous (external economic) factors (technology shifters). We define technology index based on the external economic factors which are indicators of ‘technology’. Thus our definition of productio...

  1. Overweight, abdominal obesity and associated factors in technical administrative servants

    Directory of Open Access Journals (Sweden)

    Juliane Berria

    2013-07-01

    Full Text Available The objectives of this study were to determine the prevalence rates of excess weight and abdominal obesity among technical and administrative staff at the Universidade Federal de Santa Catarina (UFSC using a range of different anthropometric indicators and to identify sociodemographic factors associated with these rates. This was a cross-sectional study of 615 members of staff at UFSC (283 men and 332 women. The following anthropometric indicators were analyzed: body mass index (BMI, waist circumference (WC and waist to height ratio (WHtR. The following sociodemographic variables were also analyzed: age, sex, skin color, marital status, socioeconomic status, educational level and employment grade. Statistical analysis was conducted using Student’s t test, the Mann-Whitney U test and Poisson regression (with a 95% confidence interval. Prevalence rates for men and women respectively were as follows; excess weight: 63.6% and 49.7% (BMI; abdominal obesity (WC: 33.5% and 42.4%; and abdominal obesity (WHtR: 61 .8% and 40.6%. Age greater than 40 years was associated with a higher probability of excess weight and abdominal obesity in men (by BMI and WHtR and women (by BMI, WC and WHtR. Women who had spent 8 years or fewer in education had lower probabilities of excess weight (PR=0.67; 95%Cl=0.49; 0.94 and abdominal obesity, by both WC (PR=0.62; 95%Cl=0.44; 0.90 and WHtR (PR=0.49; 95%Cl=0.39; 0.64. These results indicate an elevated prevalence of excess weight and abdominal obesity and show that the factors associated with these outcomes vary by sex and depending on the anthropometric indicator analyzed.

  2. Nuclear safety and human factors: the French factory of expertise

    International Nuclear Information System (INIS)

    Rolina, G.

    2009-01-01

    The French regulation of the nuclear safety is based on the maintaining of a deep technical dialogue between the nuclear safety authority, the I.R.S.N. (Institute of radiation protection and nuclear safety) and the nuclear operators. This type of risk management is called 'french coking' by the Anglo-Saxons, followers of stricter regulatory approach, more readable by the civil society. This technical dialogue is not without quality, especially in the field of human and organizational factors where it allows to improve the know how situation that stays incomplete. (N.C.)

  3. US Nuclear Regulatory Commission Human Factors Program Plan. Revision 1

    International Nuclear Information System (INIS)

    1984-09-01

    The purpose of the NRC Human Factors Program Plan (NUREG-0985) is to ensure that proper consideration is given to human factors in the design, operation, and maintenance of nuclear facilities. This revised plan addresses nuclear power plants (NPPs) and describes (1) the technical assistance and research activities planned to provide the technical bases for the resolution of the remaining human factors related tasks described in NUREG-0660, THE NRC Action Plan developed as a result of the TMI-2 Accident, and NUREG-0737, Clarification of TMI Action Plan Requirements; (2) the additional human factors efforts identified during implementation of the Action Plan that should receive NRC attention; (3) conduct of developmental activities specified in NUREG-0985 during FY-83; and (4) the impact of Section 306 of the Nuclear Waste Policy Act of 1982, PL 97-425. The plan represents a systematic and comprehensive approach for addressing human factors concerns important to NPP safety in the FY-84 through FY-86 time frame

  4. The Consolidated Human Activity Database — Master Version (CHAD-Master) Technical Memorandum

    Science.gov (United States)

    This technical memorandum contains information about the Consolidated Human Activity Database -- Master version, including CHAD contents, inventory of variables: Questionnaire files and Event files, CHAD codes, and references.

  5. Human factors engineering checklists for application in the SAR process

    Energy Technology Data Exchange (ETDEWEB)

    Overlin, T.K.; Romero, H.A.; Ryan, T.G.

    1995-03-01

    This technical report was produced to assist the preparers and reviewers of the human factors portions of the SAR in completing their assigned tasks regarding analysis and/or review of completed analyses. The checklists, which are the main body of the report, and the subsequent tables, were developed to assist analysts in generating the needed analysis data to complete the human engineering analysis for the SAR. The technical report provides a series of 19 human factors engineering (HFE) checklists which support the safety analyses of the US Department of Energy`s (DOE) reactor and nonreactor facilities and activities. The results generated using these checklists and in the preparation of the concluding analyses provide the technical basis for preparing the human factors chapter, and subsequent inputs to other chapters, required by DOE as a part of the safety analysis reports (SARs). This document is divided into four main sections. The first part explains the origin of the checklists, the sources utilized, and other information pertaining to the purpose and scope of the report. The second part, subdivided into 19 sections, is the checklists themselves. The third section is the glossary which defines terms that could either be unfamiliar or have specific meanings within the context of these checklists. The final section is the subject index in which the glossary terms are referenced back to the specific checklist and page the term is encountered.

  6. Human factors engineering checklists for application in the SAR process

    International Nuclear Information System (INIS)

    Overlin, T.K.; Romero, H.A.; Ryan, T.G.

    1995-03-01

    This technical report was produced to assist the preparers and reviewers of the human factors portions of the SAR in completing their assigned tasks regarding analysis and/or review of completed analyses. The checklists, which are the main body of the report, and the subsequent tables, were developed to assist analysts in generating the needed analysis data to complete the human engineering analysis for the SAR. The technical report provides a series of 19 human factors engineering (HFE) checklists which support the safety analyses of the US Department of Energy's (DOE) reactor and nonreactor facilities and activities. The results generated using these checklists and in the preparation of the concluding analyses provide the technical basis for preparing the human factors chapter, and subsequent inputs to other chapters, required by DOE as a part of the safety analysis reports (SARs). This document is divided into four main sections. The first part explains the origin of the checklists, the sources utilized, and other information pertaining to the purpose and scope of the report. The second part, subdivided into 19 sections, is the checklists themselves. The third section is the glossary which defines terms that could either be unfamiliar or have specific meanings within the context of these checklists. The final section is the subject index in which the glossary terms are referenced back to the specific checklist and page the term is encountered

  7. Battelle's human factors program for the US Nuclear Regulatory Commission

    International Nuclear Information System (INIS)

    Shikiar, R.

    1983-10-01

    Battelle has been involved in a programmatic effort of technical assistance to the Division of Human Factors Safety of the NRC. This program involves the efforts of over 75 professionals engaged in over 20 projects. These projects span the areas of human factors engineering, procedures, examinations, training, staffing and qualifications, and utility management and organization. All of these bear, one way or another, on the role of operators in nuclear power plants. This programmatic effort can be viewed as part of an integrative approach to system safety

  8. Human factors in nuclear power plants

    International Nuclear Information System (INIS)

    Swain, A.D.

    1981-01-01

    This report describes some of the human factors problems in nuclear power plants and the technology that can be employed to reduce those problems. Many of the changes to improve the human factors in existing plants are inexpensive, and the expected gain in human reliability is substantial. The human factors technology is well-established and there are practitioners in most countries that have nuclear power plants. (orig.) [de

  9. Human factors in nuclear power plant operations

    International Nuclear Information System (INIS)

    Swain, A.D.

    1980-08-01

    This report describes some of the human factors problems in nuclear power plants and the technology that can be employed to reduce those problems. Many of the changes to improve the human factors in existing plants are inexpensive, and the expected gain in human reliability is substantial. The human factors technology is well-established and there are practitioners in most countries that have nuclear power plants

  10. Overview of NRC's human factors regulatory research program

    International Nuclear Information System (INIS)

    Coffman, F.D. Jr.

    1989-01-01

    The human factors research program is divided into distinct and interrelated program activities: (1) Personnel Performance measurement, (2) Personnel Subsystem, (3) Human-System Interface, (4) Organization and Management, and (5) a group of Reliability Assessment activities. The purpose of the Personnel Performance Measurement activity is to improve the Agency's understanding of the factors influencing personnel performance and the effects on the safety of nuclear operations and maintenance by developing improvements to methods for collecting and managing personnel performance data. Personnel Subsystem research will broaden the understanding of such factors as staffing, qualifications, and training that influence human performance in the nuclear system and will develop the technical basis for regulatory guidance to reduce any adverse impact of these influences on nuclear safety. Research in the Human-System Interface activity will provide the technical basis for ensuring that the interface between the system and the human user supports safe operations and maintenance. Organization and Management research will result in the development of tools for evaluating organization and management issues within the nuclear industry. And finally, the Reliability Assessment group of activities includes multidisciplinary research that will integrate human and hardware considerations for evaluating reliability and risk in NRC licensing, inspection, and regulatory decisions

  11. Company culture and human factor

    International Nuclear Information System (INIS)

    Rerucha, F.

    1999-01-01

    Human beings constitute an important factor for smooth operation and fulfilment of special safety requirements in the workplace environment of a nuclear power station. It is therefore important to carry out investigations and continual checks in order to prevent routine complacency of the employees, not only for their respective tasks but also with regard to the structure of the plant. Frantisek Rerucha reports on the investigation of procedural approaches, the methods thereby involved and the results obtained in the nuclear power station Dukovany. The investigation came to the conclusion that communication and information problems exist in many areas. The company goals are communicated inadequately, especially on the lower and middle levels, with the result that employees do not always comply exactly with the directives. On the other hand, the employees are often overstressed with additional, often useless, information. However, willingness to communicate is mostly absent, and the employees have a feeling that personal relationships in general tend to be unsatisfactory in the nuclear power station. Management personnel is experienced as highly qualified experts without qualifications for leadership. But the study came to the conclusion that communication on the operative sector functions very well, by virtue of a well-established personal network. (orig.) [de

  12. Integrating human factors into process hazard analysis

    International Nuclear Information System (INIS)

    Kariuki, S.G.; Loewe, K.

    2007-01-01

    A comprehensive process hazard analysis (PHA) needs to address human factors. This paper describes an approach that systematically identifies human error in process design and the human factors that influence its production and propagation. It is deductive in nature and therefore considers human error as a top event. The combinations of different factors that may lead to this top event are analysed. It is qualitative in nature and is used in combination with other PHA methods. The method has an advantage because it does not look at the operator error as the sole contributor to the human failure within a system but a combination of all underlying factors

  13. Human factors in resuscitation: Lessons learned from simulator studies

    Directory of Open Access Journals (Sweden)

    Hunziker S

    2010-01-01

    Full Text Available Medical algorithms, technical skills, and repeated training are the classical cornerstones for successful cardiopulmonary resuscitation (CPR. Increasing evidence suggests that human factors, including team interaction, communication, and leadership, also influence the performance of CPR. Guidelines, however, do not yet include these human factors, partly because of the difficulties of their measurement in real-life cardiac arrest. Recently, clinical studies of cardiac arrest scenarios with high-fidelity video-assisted simulations have provided opportunities to better delineate the influence of human factors on resuscitation team performance. This review focuses on evidence from simulator studies that focus on human factors and their influence on the performance of resuscitation teams. Similar to studies in real patients, simulated cardiac arrest scenarios revealed many unnecessary interruptions of CPR as well as significant delays in defibrillation. These studies also showed that human factors play a major role in these shortcomings and that the medical performance depends on the quality of leadership and team-structuring. Moreover, simulated video-taped medical emergencies revealed that a substantial part of information transfer during communication is erroneous. Understanding the impact of human factors on the performance of a complex medical intervention like resuscitation requires detailed, second-by-second, analysis of factors involving the patient, resuscitative equipment such as the defibrillator, and all team members. Thus, high-fidelity simulator studies provide an important research method in this challenging field.

  14. Extending human potential in a technical learning environment

    Science.gov (United States)

    Fielden, Kay A.

    This thesis is a report of a participatory inquiry process looking at enhancing the learning process in a technical academic field in high education by utilising tools and techniques which go beyond the rational/logical, intellectual domain in a functional, objective world. By empathising with, nurturing and sustaining the whole person, and taking account of past patterning as well as future visions including technological advances to augment human awareness, the scene is set for depth learning. Depth learning in a tertiary environment can only happen as a result of the dynamic that exists between the dominant, logical/rational, intellectual paradigm and the experiential extension of the boundaries surrounding this domain. Any experiences which suppress the full, holistic expression of our being alienate us from the fullness of the expression and hence from depth learning. Depth learning is indicated by intrinsic motivation, which is more likely to occur in a trusting and supporting environment. The research took place within a systemic intellectual framework, where emergence is the prime characteristic used to evaluate results.

  15. Human Factors Throughout the Life Cycle: Lessons Learned from the Shuttle Program. [Human Factors in Ground Processing

    Science.gov (United States)

    Kanki, Barbara G.

    2011-01-01

    With the ending of the Space Shuttle Program, it is critical that we not forget the Human Factors lessons we have learned over the years. At every phase of the life cycle, from manufacturing, processing and integrating vehicle and payload, to launch, flight operations, mission control and landing, hundreds of teams have worked together to achieve mission success in one of the most complex, high-risk socio-technical enterprises ever designed. Just as there was great diversity in the types of operations performed at every stage, there was a myriad of human factors that could further complicate these human systems. A single mishap or close call could point to issues at the individual level (perceptual or workload limitations, training, fatigue, human error susceptibilities), the task level (design of tools, procedures and aspects of the workplace), as well as the organizational level (appropriate resources, safety policies, information access and communication channels). While we have often had to learn through human mistakes and technological failures, we have also begun to understand how to design human systems in which individuals can excel, where tasks and procedures are not only safe but efficient, and how organizations can foster a proactive approach to managing risk and supporting human enterprises. Panelists will talk about their experiences as they relate human factors to a particular phase of the shuttle life cycle. They will conclude with a framework for tying together human factors lessons-learned into system-level risk management strategies.

  16. The Measurement of Technical Efficiency and Effective Factors in Cucumber Greenhouse (Case Study: Eastern Azarbayjan Province

    Directory of Open Access Journals (Sweden)

    B. Abdollahi

    2010-10-01

    Full Text Available The purpose of this study was to estimate technical efficiency of cucumber greenhouses in Eastern Azarbayjan. In economic literature, it means the ratio of maximum output to the inputs. The objective of this research was to determinate the effective factors influencing it's inefficiency. The method of determination of deterministic and stochastic technical efficiency is corrected ordinary least squares (COLS and maximum likelihood (ML respectively. The average of technical efficiency in province’s cucumber greenhouse is approximately about 57 and 93 percent for deterministic and stochastic frontier method respectively. Production types had positive influence on technical inefficiency whereas experience of manager have negative influence on technical inefficiency.

  17. Development of human factors design review guidelines(III)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1999-02-15

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, human factors engineering program review model' and '26, review criteria for human factors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents NUREG--0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm system. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994.

  18. Development of human factors design review guidelines(II)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea)

    1998-06-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: 25. Human Factors Engineering Program Review Model and 26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation, which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents of NUREG-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994. (author). 11 refs., 2 figs., 2 tabs.

  19. Development of human factors design review guidelines(III)

    International Nuclear Information System (INIS)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul

    1999-02-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, human factors engineering program review model' and '26, review criteria for human factors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents NUREG--0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm system. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994

  20. Development of human factors design review guidelines(II)

    International Nuclear Information System (INIS)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul

    1998-06-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, human factors engineering program review model' and '26, review criteria for human factors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents NUREG--0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm system. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994

  1. Development of human factors design review guidelines(III)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1999-02-15

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, human factors engineering program review model' and '26, review criteria for human factors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents NUREG--0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm system. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994.

  2. Ranking factors of an investment in cogeneration: sensitivity analysis ranking the technical and economical factors

    International Nuclear Information System (INIS)

    Sundberg, Gunnel

    2001-01-01

    A deregulation of the electricity market in Europe will result in increased competition among the power-producing companies. They will therefore carefully estimate the financial risk in an investment in new power-producing capability. One part of the risk assessment is to perform a sensitivity analysis. This paper presents a sensitivity analysis using factorial design, resulting in an assessment of the most important technical and economical factors affecting an investment in gas turbine combined cycle and a steam cycle fired by wood chips. The study is performed using a simulation model that optimises the operation of existing power plants and potential new investments to fulfil the desired heat demand. The local utility system analysed is a Swedish district heating system with 655 GWh y -1 heat demand. The conclusion is that to understand which of the technical and economical factors affect the investment, it is not sufficient to investigate the parameters of the studied plant, but also the parameters related to the competing plants. Both the individual effects of the factors and the effect of their interaction should be investigated. For the energy system studied the price of natural gas, price of wood chips and investment cost have the major influence on the profitability of the investment. (Author)

  3. Human factors methods in DOE nuclear facilities

    International Nuclear Information System (INIS)

    Bennett, C.T.; Banks, W.W.; Waters, R.J.

    1993-01-01

    The US Department of Energy (DOE) is in the process of developing a series of guidelines for the use of human factors standards, procedures, and methods to be used in nuclear facilities. This paper discusses the philosophy and process being used to develop a DOE human factors methods handbook to be used during the design cycle. The following sections will discuss: (1) basic justification for the project; (2) human factors design objectives and goals; and (3) role of human factors engineering (HFE) in the design cycle

  4. Human Factors Military Lexicon: Auditory Displays

    National Research Council Canada - National Science Library

    Letowski, Tomasz

    2001-01-01

    .... In addition to definitions specific to auditory displays, speech communication, and audio technology, the lexicon includes several terms unique to military operational environments and human factors...

  5. Factors Influencing Choice of Occupational Area among Technical ...

    African Journals Online (AJOL)

    Interest in study area; perceived availability of job opportunities related to area of specialization; simplicity of area in training and in employment; and perceived affordability of equipment for self-employment were found to influence choice of occupational area among the two groups. Keywords: Technical Education; Career ...

  6. Analysis of the Factors Influencing the Technical Efficiency of ...

    African Journals Online (AJOL)

    The study analyzed the relationship between technical efficiency of women rubber tappers in Rubber Research Institute of Nigeria, Benin City. A total of 60 women were selected through purposive and random sampling techniques and served with a structured interview schedule. Data collected were subjected to ...

  7. Human factor problem in nuclear power generation

    International Nuclear Information System (INIS)

    Yoshino, Kenji; Fujimoto, Junzo

    1999-01-01

    Since a nuclear power plant accident at Threemile Island in U.S.A. occurred in March, 1979, twenty years have passed. After the accident, the human factor problem became focussed in nuclear power, to succeed its research at present. For direct reason of human error, most of factors at individual level or work operation level are often listed at their center. Then, it is natural that studies on design of a machine or apparatus suitable for various human functions and abilities and on improvement of relationship between 'human being and machine' and 'human being and working environment' are important in future. Here was, as first, described on outlines of the human factor problem in a nuclear power plant developed at a chance of past important accident, and then was described on educational training for its countermeasure. At last, some concrete researching results obtained by human factor research were introduced. (G.K.)

  8. Human Modeling for Ground Processing Human Factors Engineering Analysis

    Science.gov (United States)

    Stambolian, Damon B.; Lawrence, Brad A.; Stelges, Katrine S.; Steady, Marie-Jeanne O.; Ridgwell, Lora C.; Mills, Robert E.; Henderson, Gena; Tran, Donald; Barth, Tim

    2011-01-01

    There have been many advancements and accomplishments over the last few years using human modeling for human factors engineering analysis for design of spacecraft. The key methods used for this are motion capture and computer generated human models. The focus of this paper is to explain the human modeling currently used at Kennedy Space Center (KSC), and to explain the future plans for human modeling for future spacecraft designs

  9. Human factors and safe patient care.

    Science.gov (United States)

    Norris, Beverley

    2009-03-01

    This paper aims to introduce the topic of human factors to nursing management and to identify areas where it can be applied to patient safety. Human factors is a discipline established in most safety critical industries and uses knowledge about human behaviour in the analysis and design of complex systems, yet it is relatively new to many in healthcare. Most safety critical industries have developed tools and techniques to apply human factors to system design, and these have been reviewed together with those resources already available for use in healthcare. Models of human behaviour such as the nature and patterns of human error, information processing, decision-making and team work have clear applications to healthcare. Human factors focus on a system view of safety, and propose that safety should, where possible, be 'designed in'. Other interventions such as building defences, mitigating hazards and education and training should only be used where design solutions cannot be found. Simple human factors principles such as: designing for standardization; the involvement of users and staff in designing services and procuring equipment; understanding how errors occur; and the workarounds that staff will inevitably take are vital considerations in improving patient safety. Opportunities for the application of human factors to healthcare and improved patient safety are discussed. Some existing tools and techniques for applying human factors in nursing management are also presented.

  10. Factors that affect scrub practitioner non-technical skills: A literature review.

    Science.gov (United States)

    McClelland, Guy

    2018-04-01

    Non-technical skills are the cognitive and interpersonal behaviours that compliment clinical competence in surgery. Effective use of non-technical skills is essential for scrub practice, because they facilitate anticipation of the surgeon's requirements and promote appropriate communication behaviours. This literature review analyses the factors that may influence a scrub practitioner's use of non-technical skills during surgery. Recommendations are made that are intended to improve their use by reducing behavioural variations during surgery.

  11. Human Factors Simulation in Construction Management Education

    Science.gov (United States)

    Jaeger, M.; Adair, D.

    2010-01-01

    Successful construction management depends primarily on the representatives of the involved construction project parties. In addition to effective application of construction management tools and concepts, human factors impact significantly on the processes of any construction management endeavour. How can human factors in construction management…

  12. Factors affecting the technical efficiency of dairy farms in Kosovo

    Directory of Open Access Journals (Sweden)

    Egzon BAJRAMI

    2017-11-01

    Full Text Available A possible accession into the World Trade Organization (WTO and an expected membership in the European Union raise significant opportunities and challenges for the agricultural sector in Kosovo. As a result of these changes, the sector will have to improve efficiency and competitiveness. This research is motivated by the need to understand better the forces that drive competitiveness in the Kosovo dairy sector. This study estimates the technical efficiency (TE of 243 dairy farms in Kosovo and relates TE variation to farm size and other primary determinants of TE. A stochastic frontier production function is estimated using a two-stage procedure. Results reveal that concentrate feed intake, land use per cow, and the number of days cows had been kept on pasture have statistically significant impacts on milk productivity per cow. The mean technical efficiency of dairy farms was estimated at 0.72. The major determinants that increase efficiency are breed improvement, intensification of corn production on the farm, improving concentrate feed intake, and using free-range production systems. Given the results from the technical efficiency analysis, it is crucial for the Government of Kosovo to redesign their dairy policy—specifically their grant investment schemes—and target assistance on improving national herd genetics, promoting free range systems and expanding area planted in corn.

  13. Implementing human factors in clinical practice

    Science.gov (United States)

    Timmons, Stephen; Baxendale, Bryn; Buttery, Andrew; Miles, Giulia; Roe, Bridget; Browes, Simon

    2015-01-01

    Objectives To understand whether aviation-derived human factors training is acceptable and useful to healthcare professionals. To understand whether and how healthcare professionals have been able to implement human factors approaches to patient safety in their own area of clinical practice. Methods Qualitative, longitudinal study using semi-structured interviews and focus groups, of a multiprofessional group of UK NHS staff (from the emergency department and operating theatres) who have received aviation-derived human factors training. Results The human factors training was evaluated positively, and thought to be both acceptable and relevant to practice. However, the staff found it harder to implement what they had learned in their own clinical areas, and this was principally attributed to features of the informal organisational cultures. Conclusions In order to successfully apply human factors approaches in hospital, careful consideration needs to be given to the local context and informal culture of clinical practice. PMID:24631959

  14. Human Factors in Cabin Accident Investigations

    Science.gov (United States)

    Chute, Rebecca D.; Rosekind, Mark R. (Technical Monitor)

    1996-01-01

    Human factors has become an integral part of the accident investigation protocol. However, much of the investigative process remains focussed on the flight deck, airframe, and power plant systems. As a consequence, little data has been collected regarding the human factors issues within and involving the cabin during an accident. Therefore, the possibility exists that contributing factors that lie within that domain may be overlooked. The FAA Office of Accident Investigation is sponsoring a two-day workshop on cabin safety accident investigation. This course, within the workshop, will be of two hours duration and will explore relevant areas of human factors research. Specifically, the three areas of discussion are: Information transfer and resource management, fatigue and other physical stressors, and the human/machine interface. Integration of these areas will be accomplished by providing a suggested checklist of specific cabin-related human factors questions for investigators to probe following an accident.

  15. Specifications for human factors guiding documents

    Energy Technology Data Exchange (ETDEWEB)

    Rhodes, W; Szlapetis, I; MacGregor, C [Rhodes and Associates Inc., Toronto, ON (Canada)

    1995-04-01

    This report specifies the content, function and appearance of three proposed human factors guiding documents to be used by the Atomic Energy Control board and its licensees. These three guiding documents, to be developed at a later date, are: (a) Human Factors Process Guide; (b) Human Factors Activities Guide; and (c) Human Factors Design Integration Guide. The specifications were developed by examining the best documents as identified in a previous contract with the AECB (Review of Human Factors Guidelines and Methods by W. Rhodes, I. Szlapetis et al. 1992), and a brief literature review. The best features and content were selected from existing documents and used to develop specifications for the guiding documents. The developer of the actual guides would use these specifications to produce comprehensive and consolidated documents at a later date. (author). 128 ref., 7 figs.

  16. Specifications for human factors guiding documents

    International Nuclear Information System (INIS)

    Rhodes, W.; Szlapetis, I.; MacGregor, C.

    1995-04-01

    This report specifies the content, function and appearance of three proposed human factors guiding documents to be used by the Atomic Energy Control board and its licensees. These three guiding documents, to be developed at a later date, are: (a) Human Factors Process Guide; (b) Human Factors Activities Guide; and (c) Human Factors Design Integration Guide. The specifications were developed by examining the best documents as identified in a previous contract with the AECB (Review of Human Factors Guidelines and Methods by W. Rhodes, I. Szlapetis et al. 1992), and a brief literature review. The best features and content were selected from existing documents and used to develop specifications for the guiding documents. The developer of the actual guides would use these specifications to produce comprehensive and consolidated documents at a later date. (author). 128 ref., 7 figs

  17. Human factors in nuclear power plants

    International Nuclear Information System (INIS)

    Pack, R.W.

    1978-01-01

    The Electric Power Research Institute has started research in human factors in nuclear power plants. One project, completed in March 1977, reviewed human factors problems in operating power plants and produced a report evaluating those problems. A second project developed computer programs for evaluating operator performance on training simulators. A third project is developing and evaluating control-room design approaches. A fourth project is reviewing human factors problems associated with power-plant maintainability and instrumentation and control technician activities. Human factors engineering is an interdisciplinary specialty concerned with influencing the design of equipment systems, facilities, and operational environments to promote safe, efficient, and reliable operator performance. The Electric Power Research Institute (EPRI) has undertaken four projects studying the application of human factors engineering principles to nuclear power plants. (author)

  18. Human factors in waste management - potential and reality

    International Nuclear Information System (INIS)

    Thompson, J.S.

    1996-01-01

    There is enormous potential for human factors contributions in the realm of waste management. The reality, however, is very different from the potential. This is particularly true for low-level and low-level mixed-waste management. The hazards are less severe; therefore, health and safety requirements (including human factors) are not as rigorous as for high-level waste. High-level waste management presents its own unique challenges and opportunities. Waste management is strongly driven by regulatory compliance. When regulations are flexible and open to interpretation and the environment is driven so strongly by regulatory compliance, standard practice is to drop open-quotes nice to haveclose quotes features, like a human factors program, to save money for complying with other requirements. The challenge is to convince decision makers that human factors can help make operations efficient and cost-effective, as well as improving safety and complying with regulations. A human factors program should not be viewed as competing with compliance efforts; in fact, it should complement them and provide additional cost-effective means of achieving compliance with other regulations. Achieving this synergy of human factors with ongoing waste management operations requires educating program and facility managers and other technical specialists about human factors and demonstrating its value open-quotes through the back doorclose quotes on existing efforts. This paper describes ongoing projects at Los Alamos National Laboratory (LANL) in support of their waste management groups. It includes lessons learned from hazard and risk analyses, safety analysis reports, job and task analyses, operating procedure development, personnel qualification/certification program development, and facility- and job-specific training program and course development

  19. Organizational root causes for human factor accidents

    International Nuclear Information System (INIS)

    Dougherty, D.T.

    1997-01-01

    Accident prevention techniques and technologies have evolved significantly throughout this century from the earliest establishment of standards and procedures to the safety engineering improvements the fruits of which we enjoy today. Most of the recent prevention efforts focused on humans and defining human factor causes of accidents. This paper builds upon the remarkable successes of the past by looking beyond the human's action in accident causation to the organizational factors that put the human in the position to cause the accident. This organizational approach crosses all functions and all career fields

  20. Human Factor on Gravelines Nuclear Power Plants

    International Nuclear Information System (INIS)

    Duboc, Gerard

    1998-01-01

    In a first part, the documents describes the commitments by EDF nuclear power plan operations to demands made by the Safety Authority regarding actions in the field of human factors (concerns expressed by the Authority, in-depth analysis, positions on different points raised by the Authority). In a second part, it presents the various actions undertaken in the Gravelines nuclear power station regarding human factors: creation of an 'operator club' (mission and objectives, methods and means, first meetings, tracking file), development of risk analysis strategy, setting up of a human factor engineering mission and example of action in case of a significant event

  1. ACSNI study group on human factors

    International Nuclear Information System (INIS)

    1993-01-01

    Organisational failures are now recognised as being as important as mechanical failures or individual human errors in causing major accidents such as the capsize of the Herald of Free Enterprise or the Pipa Alpha disaster. The Human Factors Study Group of the Advisory Committee on the Safety of Nuclear Installations was set up to look at the part played by human factors in nuclear risk and its reduction. The third report of the Study Group considers the role played by organisational factors and management in promoting nuclear safety. Actions to review and promote a safety culture are suggested. Three main conclusions are drawn and several recommendations made. (UK)

  2. Human factors in nuclear safety oversight

    International Nuclear Information System (INIS)

    Taylor, K.

    1989-01-01

    The mission of the nuclear safety oversight function at the Savannah River Plant is to enhance the process and nuclear safety of site facilities. One of the major goals surrounding this mission is the reduction of human error. It is for this reason that several human factors engineers are assigned to the Operations assessment Group of the Facility Safety Evaluation Section (FSES). The initial task of the human factors contingent was the design and implementation of a site wide root cause analysis program. The intent of this system is to determine the most prevalent sources of human error in facility operations and to assist in determining where the limited human factors resources should be focused. In this paper the strategy used to educate the organization about the field of human factors is described. Creating an awareness of the importance of human factors engineering in all facets of design, operation, and maintenance is considered to be an important step in reducing the rate of human error

  3. Human factors engineering report for the cold vacuum drying facility

    Energy Technology Data Exchange (ETDEWEB)

    IMKER, F.W.

    1999-06-30

    The purpose of this report is to present the results and findings of the final Human Factors Engineering (HFE) technical analysis and evaluation of the Cold Vacuum Drying Facility (CVDF). Ergonomics issues are also addressed in this report, as appropriate. This report follows up and completes the preliminary work accomplished and reported by the Preliminary HFE Analysis report (SNF-2825, Spent Nuclear Fuel Project Cold Vacuum Drying Facility Human Factors Engineering Analysis: Results and Findings). This analysis avoids redundancy of effort except for ensuring that previously recommended HFE design changes have not affected other parts of the system. Changes in one part of the system may affect other parts of the system where those changes were not applied. The final HFE analysis and evaluation of the CVDF human-machine interactions (HMI) was expanded to include: the physical work environment, human-computer interface (HCI) including workstation and software, operator tasks, tools, maintainability, communications, staffing, training, and the overall ability of humans to accomplish their responsibilities, as appropriate. Key focal areas for this report are the process bay operations, process water conditioning (PWC) skid, tank room, and Central Control Room operations. These key areas contain the system safety-class components and are the foundation for the human factors design basis of the CVDF.

  4. Human factors engineering report for the cold vacuum drying facility

    International Nuclear Information System (INIS)

    IMKER, F.W.

    1999-01-01

    The purpose of this report is to present the results and findings of the final Human Factors Engineering (HFE) technical analysis and evaluation of the Cold Vacuum Drying Facility (CVDF). Ergonomics issues are also addressed in this report, as appropriate. This report follows up and completes the preliminary work accomplished and reported by the Preliminary HFE Analysis report (SNF-2825, Spent Nuclear Fuel Project Cold Vacuum Drying Facility Human Factors Engineering Analysis: Results and Findings). This analysis avoids redundancy of effort except for ensuring that previously recommended HFE design changes have not affected other parts of the system. Changes in one part of the system may affect other parts of the system where those changes were not applied. The final HFE analysis and evaluation of the CVDF human-machine interactions (HMI) was expanded to include: the physical work environment, human-computer interface (HCI) including workstation and software, operator tasks, tools, maintainability, communications, staffing, training, and the overall ability of humans to accomplish their responsibilities, as appropriate. Key focal areas for this report are the process bay operations, process water conditioning (PWC) skid, tank room, and Central Control Room operations. These key areas contain the system safety-class components and are the foundation for the human factors design basis of the CVDF

  5. Human Factors in Training - Space Flight Resource Management Training

    Science.gov (United States)

    Bryne, Vicky; Connell, Erin; Barshi, Immanuel; Arsintescu, L.

    2009-01-01

    . Work on SFRM training has been conducted in collaboration with the Expedition Vehicle Division at the Mission Operations Directorate (MOD) and with United Space Alliance (USA) which provides training to Flight Controllers. The space flight resource management training work is part of the Human Factors in Training Directed Research Project (DRP) of the Space Human Factors Engineering (SHFE) Project under the Space Human Factors and Habitability (SHFH) Element of the Human Research Program (HRP). Human factors researchers at the Ames Research Center have been investigating team work and distributed decision making processes to develop a generic SFRM training framework for flight controllers. The work proposed for FY10 continues to build on this strong collaboration with MOD and the USA Training Group as well as previous research in relevant domains such as aviation. In FY10, the work focuses on documenting and analyzing problem solving strategies and decision making processes used in MCC by experienced FCers.

  6. Human factors issues for interstellar spacecraft

    Science.gov (United States)

    Cohen, Marc M.; Brody, Adam R.

    1991-01-01

    Developments in research on space human factors are reviewed in the context of a self-sustaining interstellar spacecraft based on the notion of traveling space settlements. Assumptions about interstellar travel are set forth addressing costs, mission durations, and the need for multigenerational space colonies. The model of human motivation by Maslow (1970) is examined and directly related to the design of space habitat architecture. Human-factors technology issues encompass the human-machine interface, crew selection and training, and the development of spaceship infrastructure during transtellar flight. A scenario for feasible instellar travel is based on a speed of 0.5c, a timeframe of about 100 yr, and an expandable multigenerational crew of about 100 members. Crew training is identified as a critical human-factors issue requiring the development of perceptual and cognitive aids such as expert systems and virtual reality.

  7. Not just trust: factors influencing learners' attempts to perform technical skills on real patients.

    Science.gov (United States)

    Bannister, Susan L; Dolson, Mark S; Lingard, Lorelei; Keegan, David A

    2018-06-01

    As part of their training, physicians are required to learn how to perform technical skills on patients. The previous literature reveals that this learning is complex and that many opportunities to perform these skills are not converted into attempts to do so by learners. This study sought to explore and understand this phenomenon better. A multi-phased qualitative study including ethnographic observations, interviews and focus groups was conducted to explore the factors that influence technical skill learning. In a tertiary paediatric emergency department, staff physician preceptors, residents, nurses and respiratory therapists were observed in the delivery and teaching of technical skills over a 3-month period. A constant comparison methodology was used to analyse the data and to develop a constructivist grounded theory. We conducted 419 hours of observation, 18 interviews and four focus groups. We observed 287 instances of technical skills, of which 27.5% were attempted by residents. Thematic analysis identified 14 factors, grouped into three categories, which influenced whether residents attempted technical skills on real patients. Learner factors included resident initiative, perceived need for skill acquisition and competing priorities. Teacher factors consisted of competing priorities, interest in teaching, perceived need for residents to acquire skills, attributions about learners, assessments of competency, and trust. Environmental factors were competition from other learners, judgement that the patient was appropriate, buy-in from team members, consent from patient or caregivers, and physical environment constraints. Our findings suggest that neither the presence of a learner in a clinical environment nor the trust of the supervisor is sufficient to ensure the learner will attempt a technical skill. We characterise this phenomenon as representing a pool of opportunities to conduct technical skills on live patients that shrinks to a much smaller pool of

  8. Human Factors Evaluation Mentor, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — To obtain valid and reliable data, Human Factors Engineering (HFE) evaluations are currently conducted by people with specialized training and experience in HF. HFE...

  9. Great Lakes water quality initiative technical support document for the procedure to determine bioaccumulation factors. Draft report

    International Nuclear Information System (INIS)

    1993-03-01

    The purpose of the document is to provide the technical information and rationale in support of the proposed procedures to determine bioaccumulation factors. Bioaccumulation factors, together with the quantity of aquatic organisms eaten, determine the extent to which people and wildlife are exposed to chemicals through the consumption of aquatic organisms. The more bioaccumulative a pollutant is, the more important the consumption of aquatic organisms becomes as a potential source of contaminants to humans and wildlife. Bioaccumulation factors are needed to determine both human health and wildlife tier I water quality criteria and tier II values. Also, they are used to define Bioaccumulative Chemicals of Concern among the Great Lakes Initiative universe of pollutants. Bioaccumulation factors range from less than one to several million

  10. The human factor in operation and maintenance of complex high-reliability systems

    International Nuclear Information System (INIS)

    Ryan, T.G.

    1989-01-01

    Human factors issues in probabilistic risk assessment (PRAs) of complex high-reliability systems are addressed. These PRAs influence system operation and technical support programs such as maintainability, test, and surveillance. Using the U.S. commercial nuclear power industry as the setting, the paper addresses the manner in which PRAs currently treat human performance, the state of quantification methods and source data for analyzing human performance, and the role of human factors specialist in the analysis. The paper concludes with a presentation of TALENT, an emerging concept for fully integrating broad-based human factors expertise into the PRA process, is presented. 47 refs

  11. Human Factors in Nuclear Reactor Accidents

    International Nuclear Information System (INIS)

    Mustafa, M.E.

    2016-01-01

    While many people would blame nature for the disaster of the “Fukushima Daiichi” accident, experts considered this accident to be also a human-induced disaster. This confirmed the importance of human errors which have been getting a growing interest in the nuclear field after the Three Mile Island accident. Personnel play an important role in design, operation, maintenance, planning, and management. The interface between machine and man is known as a human factor. In the present work, the human factors that have to be considered were discussed. The effect of the control room configuration and equipment design effect on the human behavior was also discussed. Precise reviewing of person’s qualifications and experience was focused. Insufficient training has been a major cause of human error in the nuclear field. The effective training issues were introduced. Avoiding complicated operational processes and non responsive management systems was stressed. Distinguishing between the procedures for normal and emergency operations was emphasised. It was stated that human error during maintenance and testing activities could cause a serious accident. This is because safety systems do not cover much more risk probabilities in the maintenance and testing activities like they do in the normal operation. In nuclear industry, the need for a classification and identification of human errors has been well recognised. As a result of this, human reliability must be assessed. These errors are analyzed by a probabilistic safety assessment which deals with errors in reading, listening and implementing procedures but not with cognitive errors. Much efforts must be accomplished to consider cognitive errors in the probabilistic safety assessment. The ways of collecting human factor data were surveyed. The methods for identifying safe designs, helping decision makers to predict how proposed or current policies will affect safety, and comprehensive understanding of the relationship

  12. technical note: technical note: on the correctness of load loss factor ...

    African Journals Online (AJOL)

    eobe

    Load Loss Factor (LLF) is a function of the estimate of the losses between the grid supply point and the consumers. estimate ... i.e. the ratio of average demand to peak demand, and using this ratio to determine an approximation to the. LLF via ...

  13. Human factor in the process of nuclear power development

    International Nuclear Information System (INIS)

    Enenkl, V.

    The building up of nuclear power requires the training not only of personnel but of the whole population as well. Professional workers in nuclear power facilities production and personnel operating the equipment of nuclear power plants must be on a high technical and managerial level. The important quality of such personnel is their reliability and responsibility. The human factor influences the level, quality and thereby also the service-life of the machines and equipment and their operation. The improvement of the quality of work in nuclear power production depends on upgrading the scientific and technical level of workers and personnel, their training, in-service education and the raising of the social standing. (B.H.)

  14. Research on disaster prevention by human factor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bok Youn; Kang, Chang Hee; Kang, Sun Duck; Jo, Young Do [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    Mining, by its very nature, requires workers and technology to function in an unpredictable environment that can not easily be engineered to accommodate human factors. Miners' physical and cognitive capabilities are sometimes stretched to the point that 'human error' in performance result. Mine safety researchers estimate that 50-85% of all mining injuries are due, in large part, to human error. Further research suggests that the primary causes of these errors in performance lie outside the individual and can be minimized by improvements in equipment design, work environments, work procedures and training. The human factors research is providing the science needed to determine which aspects of the mining environment can be made more worker-friendly and how miners can work more safely in environments that can not be improved. Underground mines have long been recognized as an innately hazardous and physically demanding work environment. Recently, mining is becoming a more complicated process as more sophisticated technologies are introduced. The more complicated or difficult the tasks to be performed, the more critical it is to have a systematic understanding of the humans, the technology, the environments, and how they interact. Human factors is a key component in solving most of today's mine safety and health problems. Human factors research primarily centered around solving problems in the following four areas: 1) How mining methods and equipment affect safety, 2) Evaluating the fit between miner's physical capabilities and the demands of their job, 3) Improving miner's ability to perceive and react to hazards, 4) Understanding how organizational and managerial variables influence safety. Human factor research was begun during the World war II. National Coal Board (British Coal) of Great Britain commenced ergonomics in 1969, and Bureau of Mine of United States started human factor researches in same year. Japan has very short history

  15. FAO-OIE-WHO Joint Technical Consultation on Avian Influenza at the Human-Animal Interface.

    Science.gov (United States)

    Anderson, Tara; Capua, Ilaria; Dauphin, Gwenaëlle; Donis, Ruben; Fouchier, Ron; Mumford, Elizabeth; Peiris, Malik; Swayne, David; Thiermann, Alex

    2010-05-01

    For the past 10 years, animal health experts and human health experts have been gaining experience in the technical aspects of avian influenza in mostly separate fora. More recently, in 2006, in a meeting of the small WHO Working Group on Influenza Research at the Human Animal Interface (Meeting report available from: http://www.who.int/csr/resources/publications/influenza/WHO_CDS_EPR_GIP_2006_3/en/index.html) in Geneva allowed influenza experts from the animal and public health sectors to discuss together the most recent avian influenza research. Ad hoc bilateral discussions on specific technical issues as well as formal meetings such as the Technical Meeting on HPAI and Human H5N1 Infection (Rome, June, 2007; information available from: http://www.fao.org/avianflu/en/conferences/june2007/index.html) have increasingly brought the sectors together and broadened the understanding of the topics of concern to each sector. The sectors have also recently come together at the broad global level, and have developed a joint strategy document for working together on zoonotic diseases (Joint strategy available from: ftp://ftp.fao.org/docrep/fao/011/ajl37e/ajl37e00.pdf). The 2008 FAO-OIE-WHO Joint Technical Consultation on Avian Influenza at the Human Animal Interface described here was the first opportunity for a large group of influenza experts from the animal and public health sectors to gather and discuss purely technical topics of joint interest that exist at the human-animal interface. During the consultation, three influenza-specific sessions aimed to (1) identify virological characteristics of avian influenza viruses (AIVs) important for zoonotic and pandemic disease, (2) evaluate the factors affecting evolution and emergence of a pandemic influenza strain and identify existing monitoring systems, and (3) identify modes of transmission and exposure sources for human zoonotic influenza infection (including discussion of specific exposure risks by affected countries). A

  16. SIMS study on statistics and environmental factors in health. Final technical report to Department of Energy

    International Nuclear Information System (INIS)

    1982-07-01

    This final technical report to DOE consists of five individual technical reports and one working paper by members of the SIMS Study at Stanford. Research topics include testing goodness-of-fit for the distribution of errors in regression models, mathematical models of cancer and their use in risk assessment, pollutant standards index (Psi), osteosarcomas among beagles exposed to 239 Plutonium, air pollution and respiratory disease, and models of human exposure to air pollution. Individual summaries of the six reports are indexed separately

  17. Advanced human-system interface design review guideline. General evaluation model, technical development, and guideline description

    International Nuclear Information System (INIS)

    O'Hara, J.M.

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use

  18. Advanced human-system interface design review guideline. General evaluation model, technical development, and guideline description

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.M.

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

  19. Human factors science and safety engineering : can the STAMP model serve in establishing a common language?

    NARCIS (Netherlands)

    Karanikas, Nektarios; Schwarz, M; Harfmann, J

    2017-01-01

    A symbiotic relationship between human factors and safety scientists is needed to ensure the provision of holistic solutions for problems emerging in modern socio-technical systems. System Theoretic Accident Model and Processes (STAMP) tackles both interactions and individual failures of human and

  20. Human Factors Engineering: Current Practices and Development Needs in Finland

    Energy Technology Data Exchange (ETDEWEB)

    Savioja, Paula; Norros, Leena; Liinasuo, Marja; Laarni, Jari [VTT Technical Research Centre of Finland, Finland (Finland)

    2011-08-15

    This paper describes initial findings from a study concerning the practices and development needs of Human Factors Engineering (HFE) in Finland. HFE is increasing in importance as the Radiation and Nuclear Safety Authority Finland (STUK) is renewing the regulatory guidelines and the intention is to include requirements concerning HFE. The motivation for the paper is to discover how HFE is conducted currently in order to envision what should be aimed at when modifying requirements for design practices. In an interview with STUK it was discovered that current HFE practices encompass mainly activities related to control room modifications and as such namely verification and validation of new designs. The adoption of the entire HFE process in design and modification projects requires changes that include better integration of technical and Human Factors Engineering approaches. Boundary objects that mediate between different design disciplines are needed in order to enforce the stronger integration. Concept of operations (CONOPS) is suggested as a such boundary object.

  1. Human Factors in Aviation Maintenance. Phase 1

    Science.gov (United States)

    1991-11-01

    solution is war- more effe-ctive use of human resoUrecs , the neat step Ls to ane- uassol o efogte.S a hr sn tes te de. Af piot progfctram can...and Subtitle 5. Report Date November 1991 Human Factors in Aviation Maintenance - Phase One Progress Report 6. Perfarng Oon z’on Code i8. Perfo-rrng...Independence Avenue, SW 14. Sponsor,mg Agency Code Washington, DC 20591 15. Supplementary Notes 16. Abstract "• This human factors research in aviation

  2. Improving human performance: Industry factors influencing the ability to perform

    Directory of Open Access Journals (Sweden)

    Güera Massyn Romo

    2013-03-01

    Full Text Available Learning interventions and new technologies that aim to improve human performance must take cognisance of industry factors inhibiting human performance. The dynamic and fast pace nature of the Information and Communication Technologies (ICT and the engineering industries do not lend themselves to proper skills planning and management. These industries experience real skills gaps, to some of which they contribute by themselves. This study reports on these performance-inhibiting factors such as the underutilisation of available skills, tolerance for individual preferences, and dynamically, and informally refining a role objective while an employee is occupying a certain role. The important professional skills required by individuals to cope with these real life factors are also explored in the skills gaps management context. Moreover, these industries need a profile they refer to as Special Forces, which denotes a high calibre of worker that possesses well-developed professional skills whilst having advanced technical expertise and sufficient experience. This resource profile is required largely due to the poor management of human resource processes in practice and the current reported lack of adequate skills. Furthermore, this study refers to the recent lack of a working definition for these Special Forces leading to the omitted active development of these profiles in industry today, which appears to become a key human performance inhibiting factor.

  3. Activation of human factor V by factor Xa and thrombin

    International Nuclear Information System (INIS)

    Monkovic, D.D.; Tracy, P.B.

    1990-01-01

    The activation of human factor V by factor Xa and thrombin was studied by functional assessment of cofactor activity and sodium dodecyl sulfate-polycarylamide gel electrophoresis followed by either autoradiography of 125 I-labeled factor V activation products or Western blot analyses of unlabeled factor V activation products. Cofactor activity was measured by the ability of the factor V/Va peptides to support the activation of prothrombin. The factor Xa catalyzed cleavage of factor V was observed to be time, phospholipid, and calcium ion dependent, yielding a cofactor with activity equal to that of thrombin-activated factor V (factor Va). The cleavage pattern differed markedly from the one observed in the bovine system. The factor Xa activated factor V subunits expressing cofactor activity were isolated and found to consist of peptides of M r 220,000 and 105,000. Although thrombin cleaved the M r 220,000 peptide to yield peptides previously shown to be products of thrombin activation, cofactor activity did not increase. N-Terminal sequence analysis confirmed that both factor Xa and thrombin cleave factor V at the same bond to generate the M r 220,000 peptide. The factor Xa dependent functional assessment of 125 I-labeled factor V coupled with densitometric analyses of the cleavage products indicated that the cofactor activity of factor Xa activated factor V closely paralleled the appearance of the M r 220,000 peptide. The data indicate that factor Xa is as efficient an enzyme toward factor V as thrombin

  4. Human factors in atomic power plant

    International Nuclear Information System (INIS)

    Kawano, Ryutaro

    1997-01-01

    To ensure safety should have priority over all other things in atomic power plants. In Chernobyl accident, however, various human factors including the systems for bulb check after inspection and communication, troubles in the interface between hardwares such as warning speakers and instruments, and their operators, those in education and training for operators and those in the general management of the plant have been pointed out. Therefore, the principles and the practical measures from the aspect of human factors in atomic power plants were discussed here. The word, ''human factor'' was given a definition in terms of the direct cause and the intellectual system. An explanatory model for human factors, model SHEL constructed by The Tokyo Electric Power Co., Ltd., Inc. was presented; the four letter mean software(S), hardware(H), environment(E) and liveware(L). In the plants of the company, systemic measures for human error factors are taken now in all steps not only for design, operation and repairing but also the step for safety culture. Further, the level required for the safety against atomic power is higher in the company than those in other fields. Thus, the central principle in atomic power plants is changing from the previous views that technology is paid greater importance to a view regarding human as most importance. (M.N.)

  5. Human factors review of power plant maintainability

    International Nuclear Information System (INIS)

    Seminara, J.L.; Parsons, S.O.; Schmidt, W.J.; Gonzalez, W.R.; Dove, L.E.

    1980-10-01

    Human factors engineering is an interdisciplinary science and technology concerned with shaping the design of machines, facilities, and operational environments to promote safe, efficient, and reliable performance on the part of operators and maintainers of equipment systems. The human factors aspects of five nuclear power plants and four fossil fuel plants were evaluated using such methods as a checklist guided observation system, structured interviews with maintenance personnel, direct observations of maintenance tasks, reviews of procedures, and analyses of maintenance errors or accidents by means of the critical incident technique. The study revealed a wide variety of human factors problem areas, most of which are extensively photodocumented. The study recommends that a more systematic and formal approach be adopted to ensure that future power plants are human engineered to the needs of maintenance personnel

  6. Human factors and safety in emergency medicine

    Science.gov (United States)

    Schaefer, H. G.; Helmreich, R. L.; Scheidegger, D.

    1994-01-01

    A model based on an input process and outcome conceptualisation is suggested to address safety-relevant factors in emergency medicine. As shown in other dynamic and demanding environments, human factors play a decisive role in attaining high quality service. Attitudes held by health-care providers, organisational shells and work-cultural parameters determine communication, conflict resolution and workload distribution within and between teams. These factors should be taken into account to improve outcomes such as operational integrity, job satisfaction and morale.

  7. Validation of human factor engineering integrated system

    International Nuclear Information System (INIS)

    Fang Zhou

    2013-01-01

    Apart from hundreds of thousands of human-machine interface resources, the control room of a nuclear power plant is a complex system integrated with many factors such as procedures, operators, environment, organization and management. In the design stage, these factors are considered by different organizations separately. However, whether above factors could corporate with each other well in operation and whether they have good human factors engineering (HFE) design to avoid human error, should be answered in validation of the HFE integrated system before delivery of the plant. This paper addresses the research and implementation of the ISV technology based on case study. After introduction of the background, process and methodology of ISV, the results of the test are discussed. At last, lessons learned from this research are summarized. (authors)

  8. Factors that influence the non-technical skills performance of scrub nurses: a prospective study.

    Science.gov (United States)

    Kang, Evelyn; Massey, Debbie; Gillespie, Brigid M

    2015-12-01

    To identify and describe the factors that impact on the performance of scrub nurses' non-technical skills performance during the intra-operative phase of surgery. Non-technical skills have been identified as important precursors to errors in the operating room. However, few studies have investigated factors influencing non-technical skills of scrub nurses. Prospective observational study. Structured observations were performed on a sample of 182 surgical procedures across eight specialities by two trained observers from August 2012-April 2013 at two hospital sites. Participants were purposively selected scrub nurses. Bivariate correlations and a multiple linear regression model were used to identify associations among length of surgery, patients' acuity using the American Society of Anesthesiologists classification system, team familiarity, number of occasions scout nurses leave the operating room, change of scout nurse and the outcome, the non-technical skills performance of scrub nurses. Patient acuity and team familiarity were the strongest predictors of scrub nurses' non-technical skills performance at hospital site A. There were no correlations between the predictors and the performance of scrub nurses at hospital site B. A dedicated surgical team and patient acuity potentially influence the performance of scrub nurses' non-technical skills. Familiarity with team members foster advanced planning, thus minimizing distractions and interruptions that impact on scrub nurses' performance. Development of interventions aimed at improving non-technical skills has the potential to make a substantial difference and enhance patient care. © 2015 John Wiley & Sons Ltd.

  9. The impact of non-discretionary factors on DEA and SFA technical efficiency differences.

    Science.gov (United States)

    Kontodimopoulos, Nick; Papathanasiou, Nikolaos D; Flokou, Angeliki; Tountas, Yannis; Niakas, Dimitris

    2011-10-01

    The purpose of this study was to examine if factors of the external operating environment can explain differences in technical efficiency derived from Data Envelopment Analysis (DEA) and Stochastic Frontier Analysis (SFA). In a sample of 124 dialysis facilities, technical efficiency was compared according to ownership, region, years in operation and size. With second-stage Tobit regression, DEA and SFA efficiency was regressed against these environmental factors to determine their potential for predicting technical efficiency, as well as the efficiency differences between the two frontier methods. DEA expectedly generated lower mean efficiency scores than SFA (68.2% vs. 79.4%, P DEA-SFA efficiency differences was explained by environmental factors. This suggests that in addition to market instabilities, luck, and other related phenomena, decision-makers in their effort to determine optimal resource allocation, should point their attention to the potentially useful insight provided by environmental factors.

  10. Human-system Interfaces to Automatic Systems: Review Guidance and Technical Basis

    Energy Technology Data Exchange (ETDEWEB)

    OHara, J.M.; Higgins, J.C.

    2010-01-31

    Automation has become ubiquitous in modern complex systems and commercial nuclear power plants are no exception. Beyond the control of plant functions and systems, automation is applied to a wide range of additional functions including monitoring and detection, situation assessment, response planning, response implementation, and interface management. Automation has become a 'team player' supporting plant personnel in nearly all aspects of plant operation. In light of the increasing use and importance of automation in new and future plants, guidance is needed to enable the NRC staff to conduct safety reviews of the human factors engineering (HFE) aspects of modern automation. The objective of the research described in this report was to develop guidance for reviewing the operator's interface with automation. We first developed a characterization of the important HFE aspects of automation based on how it is implemented in current systems. The characterization included five dimensions: Level of automation, function of automation, modes of automation, flexibility of allocation, and reliability of automation. Next, we reviewed literature pertaining to the effects of these aspects of automation on human performance and the design of human-system interfaces (HSIs) for automation. Then, we used the technical basis established by the literature to develop design review guidance. The guidance is divided into the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, we identified insights into the automaton design process, operator training, and operations.

  11. Human-system Interfaces to Automatic Systems: Review Guidance and Technical Basis

    International Nuclear Information System (INIS)

    O'Hara, J.M.; Higgins, J.C.

    2010-01-01

    Automation has become ubiquitous in modern complex systems and commercial nuclear power plants are no exception. Beyond the control of plant functions and systems, automation is applied to a wide range of additional functions including monitoring and detection, situation assessment, response planning, response implementation, and interface management. Automation has become a 'team player' supporting plant personnel in nearly all aspects of plant operation. In light of the increasing use and importance of automation in new and future plants, guidance is needed to enable the NRC staff to conduct safety reviews of the human factors engineering (HFE) aspects of modern automation. The objective of the research described in this report was to develop guidance for reviewing the operator's interface with automation. We first developed a characterization of the important HFE aspects of automation based on how it is implemented in current systems. The characterization included five dimensions: Level of automation, function of automation, modes of automation, flexibility of allocation, and reliability of automation. Next, we reviewed literature pertaining to the effects of these aspects of automation on human performance and the design of human-system interfaces (HSIs) for automation. Then, we used the technical basis established by the literature to develop design review guidance. The guidance is divided into the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, we identified insights into the automaton design process, operator training, and operations.

  12. An EDF perspective on human factors

    International Nuclear Information System (INIS)

    Carnino, A.

    1987-01-01

    Human factors are important in the reliability or unreliability of industrial processes. The study of how to improve human performers, and their working conditions to enable them to perform reliably is difficult. Some of the human characteristics of importance for understanding human behaviour in this context are described. These include such things as ''man is not a component, man functions through a single channel'', ''man biases risk estimation''. The Electricite de France programme for improving human reliability following the Three Mile Island accident is then discussed. This has many aspects, the man-machine interfaces, operator training, crew organization, operator experience analysis and emergency planning. The control room planned for a new plant, which is based on this program is described. The improvements are in communication, identification and labelling, stress, simulator tests and human performance data banks. (UK)

  13. Implementing human factors in clinical practice.

    Science.gov (United States)

    Timmons, Stephen; Baxendale, Bryn; Buttery, Andrew; Miles, Giulia; Roe, Bridget; Browes, Simon

    2015-05-01

    To understand whether aviation-derived human factors training is acceptable and useful to healthcare professionals. To understand whether and how healthcare professionals have been able to implement human factors approaches to patient safety in their own area of clinical practice. Qualitative, longitudinal study using semi-structured interviews and focus groups, of a multiprofessional group of UK NHS staff (from the emergency department and operating theatres) who have received aviation-derived human factors training. The human factors training was evaluated positively, and thought to be both acceptable and relevant to practice. However, the staff found it harder to implement what they had learned in their own clinical areas, and this was principally attributed to features of the informal organisational cultures. In order to successfully apply human factors approaches in hospital, careful consideration needs to be given to the local context and informal culture of clinical practice. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  14. Human Factors Interface with Systems Engineering for NASA Human Spaceflights

    Science.gov (United States)

    Wong, Douglas T.

    2009-01-01

    This paper summarizes the past and present successes of the Habitability and Human Factors Branch (HHFB) at NASA Johnson Space Center s Space Life Sciences Directorate (SLSD) in including the Human-As-A-System (HAAS) model in many NASA programs and what steps to be taken to integrate the Human-Centered Design Philosophy (HCDP) into NASA s Systems Engineering (SE) process. The HAAS model stresses systems are ultimately designed for the humans; the humans should therefore be considered as a system within the systems. Therefore, the model places strong emphasis on human factors engineering. Since 1987, the HHFB has been engaging with many major NASA programs with much success. The HHFB helped create the NASA Standard 3000 (a human factors engineering practice guide) and the Human Systems Integration Requirements document. These efforts resulted in the HAAS model being included in many NASA programs. As an example, the HAAS model has been successfully introduced into the programmatic and systems engineering structures of the International Space Station Program (ISSP). Success in the ISSP caused other NASA programs to recognize the importance of the HAAS concept. Also due to this success, the HHFB helped update NASA s Systems Engineering Handbook in December 2007 to include HAAS as a recommended practice. Nonetheless, the HAAS model has yet to become an integral part of the NASA SE process. Besides continuing in integrating HAAS into current and future NASA programs, the HHFB will investigate incorporating the Human-Centered Design Philosophy (HCDP) into the NASA SE Handbook. The HCDP goes further than the HAAS model by emphasizing a holistic and iterative human-centered systems design concept.

  15. Modelling human factor with Petri nets

    International Nuclear Information System (INIS)

    Bedreaga, Luminita; Constantinescu, Cristina; Guzun, Basarab

    2007-01-01

    The human contribution to risk and safety of nuclear power plant operation can be best understood, assessed and quantified using tools to evaluate human reliability. Human reliability analysis becomes an important part of every probabilistic safety assessment and it is used to demonstrate that nuclear power plants designed with different safety levels are prepared to cope with severe accidents. Human reliability analysis in context of probabilistic safety assessment consists in: identifying human-system interactions important to safety; quantifying probabilities appropriate with these interactions. Nowadays, the complex system functions can be modelled using special techniques centred either on states space adequate to system or on events appropriate to the system. Knowing that complex system model consists in evaluating the likelihood of success, in other words, in evaluating the possible value for that system being in some state, the inductive methods which are based on the system states can be applied also for human reliability modelling. Thus, switching to the system states taking into account the human interactions, the underlying basis of the Petri nets can be successfully applied and the likelihoods appropriate to these states can also derived. The paper presents the manner to assess the human reliability quantification using Petri nets approach. The example processed in the paper is from human reliability documentation without a detailed human factor analysis (qualitative). The obtained results by these two kinds of methods are in good agreement. (authors)

  16. Contextual Sensing: Integrating Contextual Information with Human and Technical Geo-Sensor Information for Smart Cities

    Science.gov (United States)

    Sagl, Günther; Resch, Bernd; Blaschke, Thomas

    2015-01-01

    In this article we critically discuss the challenge of integrating contextual information, in particular spatiotemporal contextual information, with human and technical sensor information, which we approach from a geospatial perspective. We start by highlighting the significance of context in general and spatiotemporal context in particular and introduce a smart city model of interactions between humans, the environment, and technology, with context at the common interface. We then focus on both the intentional and the unintentional sensing capabilities of today’s technologies and discuss current technological trends that we consider have the ability to enrich human and technical geo-sensor information with contextual detail. The different types of sensors used to collect contextual information are analyzed and sorted into three groups on the basis of names considering frequently used related terms, and characteristic contextual parameters. These three groups, namely technical in situ sensors, technical remote sensors, and human sensors are analyzed and linked to three dimensions involved in sensing (data generation, geographic phenomena, and type of sensing). In contrast to other scientific publications, we found a large number of technologies and applications using in situ and mobile technical sensors within the context of smart cities, and surprisingly limited use of remote sensing approaches. In this article we further provide a critical discussion of possible impacts and influences of both technical and human sensing approaches on society, pointing out that a larger number of sensors, increased fusion of information, and the use of standardized data formats and interfaces will not necessarily result in any improvement in the quality of life of the citizens of a smart city. This article seeks to improve our understanding of technical and human geo-sensing capabilities, and to demonstrate that the use of such sensors can facilitate the integration of different

  17. Contextual Sensing: Integrating Contextual Information with Human and Technical Geo-Sensor Information for Smart Cities.

    Science.gov (United States)

    Sagl, Günther; Resch, Bernd; Blaschke, Thomas

    2015-07-14

    In this article we critically discuss the challenge of integrating contextual information, in particular spatiotemporal contextual information, with human and technical sensor information, which we approach from a geospatial perspective. We start by highlighting the significance of context in general and spatiotemporal context in particular and introduce a smart city model of interactions between humans, the environment, and technology, with context at the common interface. We then focus on both the intentional and the unintentional sensing capabilities of today's technologies and discuss current technological trends that we consider have the ability to enrich human and technical geo-sensor information with contextual detail. The different types of sensors used to collect contextual information are analyzed and sorted into three groups on the basis of names considering frequently used related terms, and characteristic contextual parameters. These three groups, namely technical in situ sensors, technical remote sensors, and human sensors are analyzed and linked to three dimensions involved in sensing (data generation, geographic phenomena, and type of sensing). In contrast to other scientific publications, we found a large number of technologies and applications using in situ and mobile technical sensors within the context of smart cities, and surprisingly limited use of remote sensing approaches. In this article we further provide a critical discussion of possible impacts and influences of both technical and human sensing approaches on society, pointing out that a larger number of sensors, increased fusion of information, and the use of standardized data formats and interfaces will not necessarily result in any improvement in the quality of life of the citizens of a smart city. This article seeks to improve our understanding of technical and human geo-sensing capabilities, and to demonstrate that the use of such sensors can facilitate the integration of different

  18. Management of technical and scientific competence and human resources

    International Nuclear Information System (INIS)

    Coupland, S.

    2007-01-01

    The Canadian nuclear industry has recently begun to expand and is facing challenges in developing and maintaining expertise in the nuclear sector. A report commissioned by the CANDU Owners Group confirmed that organizations that provide R and D support to the nuclear industry were operating at or near minimum capabilities. It revealed low entry rates into the nuclear industry and an ageing workforce. In response, industry adopted a three part strategy: (i) development of a strategic plan for maintaining the strength of R and D organizations, (ii) development of CANDU specific technical centres of excellence and (iii) development of strategies for the attraction, training and retention of new graduates. The University Network of Excellence in Nuclear Engineering (UNENE) was established as an alliance of Canadian universities, nuclear power utilities, and research and regulatory agencies for the support and development of nuclear education, as well as R and D capability in Canadian universities. The University of Ontario Institute of Technology (UOIT), Canada's newest university, includes the School of Energy Engineering and Nuclear Sciences (SEENS), which offers undergraduate degrees in nuclear engineering, radiation science and related areas. The Canadian nuclear industry and universities established the CANTEACH programme to develop a comprehensive set of education and training documents, with university participation. The Canadian Nuclear Association prepared three initiatives: (i) developing a strategic and long term view of the nuclear industry on which individual companies can anchor and build recruitment strategies; (ii) pursuing career and industry branding initiatives to attract young students; (iii) providing benchmarking initiatives to improve workforce planning, talent management, succession planning capabilities and knowledge management. Through these initiatives, the Canadian nuclear industry believes that it has a realistic and achievable plan to

  19. Hematopoietic growth factors and human acute leukemia.

    Science.gov (United States)

    Löwenberg, B; Touw, I

    1988-10-22

    The study of myelopoietic maturation arrest in acute myeloblastic leukemia (AML) has been eased by availability of the human recombinant hemopoietic growth factors, macrophage colony stimulating factor (M-CSF), granulocyte-(G-CSF), granulocyte-macrophage-(GM-CSF) and multilineage stimulating factor (IL-3). Nonphysiological expansion of the leukemic population is not due to escape from control by these factors. Proliferation in vitro of AML cells is dependent on the presence of one or several factors in most cases. The pattern of factor-dependency does not correlate with morphological criteria in individual cases, and may thus offer a new tool for classification of AML. Overproduction of undifferentiated cells is not due to abnormal expression of receptors for the stimulating factors acting at an immature level. Rather, autocrine secretion of early acting lymphokines maintains proliferation of the leukemic clone. When looking at causes of leukemic dysregulation, yet undefined inhibitors of differentiation probably are of equal importance as dysequilibrated stimulation by lymphokines.

  20. Human Research Program: Space Human Factors and Habitability Element

    Science.gov (United States)

    Russo, Dane M.

    2007-01-01

    The three project areas of the Space Human Factors and Habitability Element work together to achieve a working and living environment that will keep crews healthy, safe, and productive throughout all missions -- from Earth orbit to Mars expeditions. The Advanced Environmental Health (AEH) Project develops and evaluates advanced habitability systems and establishes requirements and health standards for exploration missions. The Space Human Factors Engineering (SHFE) Project s goal is to ensure a safe and productive environment for humans in space. With missions using new technologies at an ever-increasing rate, it is imperative that these advances enhance crew performance without increasing stress or risk. The ultimate goal of Advanced Food Technology (AFT) Project is to develop and deliver technologies for human centered spacecraft that will support crews on missions to the moon, Mars, and beyond.

  1. HUMAN FACTORS GUIDANCE FOR CONTROL ROOM EVALUATION

    International Nuclear Information System (INIS)

    OHARA, J.; BROWN, W.; STUBLER, W.; HIGGINS, J.; WACHTEL, J.; PERSENSKY, J.J.

    2000-01-01

    The Human-System Interface Design Review Guideline (NUREG-0700, Revision 1) was developed by the US Nuclear Regulatory Commission (NRC) to provide human factors guidance as a basis for the review of advanced human-system interface technologies. The guidance consists of three components: design review procedures, human factors engineering guidelines, and a software application to provide design review support called the ''Design Review Guideline.'' Since it was published in June 1996, Rev. 1 to NUREG-0700 has been used successfully by NRC staff, contractors and nuclear industry organizations, as well as by interested organizations outside the nuclear industry. The NRC has committed to the periodic update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool in the face of emerging and rapidly changing technology. This paper addresses the current research to update of NUREG-0700 based on the substantial work that has taken place since the publication of Revision 1

  2. Regulatory perspectives on human factors validation

    International Nuclear Information System (INIS)

    Harrison, F.; Staples, L.

    2001-01-01

    Validation is an important avenue for controlling the genesis of human error, and thus managing loss, in a human-machine system. Since there are many ways in which error may intrude upon system operation, it is necessary to consider the performance-shaping factors that could introduce error and compromise system effectiveness. Validation works to this end by examining, through objective testing and measurement, the newly developed system, procedure or staffing level, in order to identify and eliminate those factors which may negatively influence human performance. It is essential that validation be done in a high-fidelity setting, in an objective and systematic manner, using appropriate measures, if meaningful results are to be obtained, In addition, inclusion of validation work in any design process can be seen as contributing to a good safety culture, since such activity allows licensees to eliminate elements which may negatively impact on human behaviour. (author)

  3. Space operations and the human factor

    Science.gov (United States)

    Brody, Adam R.

    1993-10-01

    Although space flight does not put the public at high risk, billions of dollars in hardware are destroyed and the space program halted when an accident occurs. Researchers are therefore applying human-factors techniques similar to those used in the aircraft industry, albeit at a greatly reduced level, to the spacecraft environment. The intent is to reduce the likelihood of catastrophic failure. To increase safety and efficiency, space human factors researchers have simulated spacecraft docking and extravehicular activity rescue. Engineers have also studied EVA suit mobility and aids. Other basic human-factors issues that have been applied to the space environment include antropometry, biomechanics, and ergonomics. Workstation design, workload, and task analysis currently receive much attention, as do habitability and other aspects of confined environments. Much work also focuses on individual payloads, as each presents its own complexities.

  4. Human Factors Engineering Guidelines for Overhead Cranes

    Science.gov (United States)

    Chandler, Faith; Delgado, H. (Technical Monitor)

    2001-01-01

    This guideline provides standards for overhead crane cabs that can be applied to the design and modification of crane cabs to reduce the potential for human error due to design. This guideline serves as an aid during the development of a specification for purchases of cranes or for an engineering support request for crane design modification. It aids human factors engineers in evaluating existing cranes during accident investigations or safety reviews.

  5. Human factors issues in fuel handling

    International Nuclear Information System (INIS)

    Beattie, J.D.; Iwasa-Madge, K.M.; Tucker, D.A.

    1994-01-01

    The staff of the Atomic Energy Control Board wish to further their understanding of human factors issues of potential concern associated with fuel handling in CANDU nuclear power stations. This study contributes to that objective by analysing the role of human performance in the overall fuel handling process at Ontario Hydro's Darlington Nuclear Generating Station, and reporting findings in several areas. A number of issues are identified in the areas of design, operating and maintenance practices, and the organizational and management environment

  6. HAMMLAB 2000 for human factor's studies

    International Nuclear Information System (INIS)

    Kvalem, J.

    1999-01-01

    The simulator-based Halden Man-Machine Laboratory (HAMMLAB) has, since its establishment in 1983, been the main vehicle for the human-machine systems research at the OECD Halden Reactor Project. The human factors programme relies upon HAMMLAB for performing experimental studies, but the laboratory is also utilised when evaluating computerised operator support systems, and for experimentation with advanced control room prototypes. The increased focus on experimentation as part of the research programme at the Halden Project, has led to a discussion whether today's laboratory will meet the demands of the future. A pre-project concluded with the need for a new laboratory, with extended simulation capabilities. Based upon these considerations, the HAMMLAB 2000 project was initiated with the goal of making HAMMLAB a global centre of excellence for the study of human-technology interaction in the management and control of industrial processes. This paper will focus on human factors studies to be performed in the new laboratory, and which requirements this will bring upon the laboratory infrastructure and simulation capabilities. The aim of the human factors research at the Halden Project is to provide knowledge which can be used by member organisations to enhance safety and efficiency in the operation of nuclear power plants by utilising research about the capabilities and limitations of the human operator in a control room environment. (author)

  7. Annotated bibliography of human factors applications literature

    Energy Technology Data Exchange (ETDEWEB)

    McCafferty, D.B.

    1984-09-30

    This bibliography was prepared as part of the Human Factors Technology Project, FY 1984, sponsored by the Office of Nuclear Safety, US Department of Energy. The project was conducted by Lawrence Livermore National Laboratory, with Essex Corporation as a subcontractor. The material presented here is a revision and expansion of the bibliographic material developed in FY 1982 as part of a previous Human Factors Technology Project. The previous bibliography was published September 30, 1982, as Attachment 1 to the FY 1982 Project Status Report.

  8. Annotated bibliography of human factors applications literature

    International Nuclear Information System (INIS)

    McCafferty, D.B.

    1984-01-01

    This bibliography was prepared as part of the Human Factors Technology Project, FY 1984, sponsored by the Office of Nuclear Safety, US Department of Energy. The project was conducted by Lawrence Livermore National Laboratory, with Essex Corporation as a subcontractor. The material presented here is a revision and expansion of the bibliographic material developed in FY 1982 as part of a previous Human Factors Technology Project. The previous bibliography was published September 30, 1982, as Attachment 1 to the FY 1982 Project Status Report

  9. Software for automated evaluation of technical and economic performance factors of nuclear power plant units

    International Nuclear Information System (INIS)

    Cvan, M.; Zadrazil, J.; Barnak, M.

    1989-01-01

    Computer codes TEP V2, TEP EDU and TEP V1 are used especially in real-time evaluation of technical and economic performance factors of the power unit. Their basic functions include filtration of credibility of input data obtained by measurement, simultaneous calculation of flows of various types of energy, calculation of technical and economic factors, listings and filing of the results. Code ZMEK is designed for executing changes in the calculation constants file for codes TEP V2 and TEP EDU. Code TEP DEN is used in processing the complete daily report on the technical and economic performance factors of the unit. Briefly described are the basic algorithms of credibility filtration for the measured quantities, the methodology of fundamental balances and the method of guaranteeing the continuity of measurement. Experiences are given with the use of the codes, and the trends are outlined of their future development. (J.B.). 5 refs

  10. Technology assessment of human spaceflight - Combining philosophical and technical issues

    Science.gov (United States)

    Fromm, J.; Hoevelmann, G. H.

    1992-08-01

    A transutilitarian rationale is proposed for assessing human spaceflight that is based on objectives for these endeavors and ethical norms of conduct. Specific attention is given to: presupposed/tacit reasons for including man in spaceflight and the restricted notion of rational/justifiable activity. It is shown that economic rationale is insufficient and unsuitable as a means for assessing manned spaceflight, and transutilitarian objectives are compiled that contribute to the motivation for manned flight. The transutilitarian motivations include: pioneering uncharted territory, enhancing national prestige, establishing space-related autonomy, promoting international cooperation, and enhancing science and the quality of human life.

  11. Human factors reliability benchmark exercise: a review

    International Nuclear Information System (INIS)

    Humphreys, P.

    1990-01-01

    The Human Factors Reliability Benchmark Exercise has addressed the issues of identification, analysis, representation and quantification of Human Error in order to identify the strengths and weaknesses of available techniques. Using a German PWR nuclear powerplant as the basis for the studies, fifteen teams undertook evaluations of a routine functional Test and Maintenance procedure plus an analysis of human actions during an operational transient. The techniques employed by the teams are discussed and reviewed on a comparative basis. The qualitative assessments performed by each team compare well, but at the quantification stage there is much less agreement. (author)

  12. Human Factors Considerations in New Nuclear Power Plants: Detailed Analysis.

    Energy Technology Data Exchange (ETDEWEB)

    OHara,J.; Higgins, J.; Brown, W.; Fink, R.

    2008-02-14

    This Nuclear Regulatory Commission (NRC) sponsored study has identified human-performance issues in new and advanced nuclear power plants. To identify the issues, current industry developments and trends were evaluated in the areas of reactor technology, instrumentation and control technology, human-system integration technology, and human factors engineering (HFE) methods and tools. The issues were organized into seven high-level HFE topic areas: Role of Personnel and Automation, Staffing and Training, Normal Operations Management, Disturbance and Emergency Management, Maintenance and Change Management, Plant Design and Construction, and HFE Methods and Tools. The issues where then prioritized into four categories using a 'Phenomena Identification and Ranking Table' methodology based on evaluations provided by 14 independent subject matter experts. The subject matter experts were knowledgeable in a variety of disciplines. Vendors, utilities, research organizations and regulators all participated. Twenty issues were categorized into the top priority category. This Brookhaven National Laboratory (BNL) technical report provides the detailed methodology, issue analysis, and results. A summary of the results of this study can be found in NUREG/CR-6947. The research performed for this project has identified a large number of human-performance issues for new control stations and new nuclear power plant designs. The information gathered in this project can serve as input to the development of a long-term strategy and plan for addressing human performance in these areas through regulatory research. Addressing human-performance issues will provide the technical basis from which regulatory review guidance can be developed to meet these challenges. The availability of this review guidance will help set clear expectations for how the NRC staff will evaluate new designs, reduce regulatory uncertainty, and provide a well-defined path to new nuclear power plant

  13. Human genetic factors in tuberculosis: an update.

    Science.gov (United States)

    van Tong, Hoang; Velavan, Thirumalaisamy P; Thye, Thorsten; Meyer, Christian G

    2017-09-01

    Tuberculosis (TB) is a major threat to human health, especially in many developing countries. Human genetic variability has been recognised to be of great relevance in host responses to Mycobacterium tuberculosis infection and in regulating both the establishment and the progression of the disease. An increasing number of candidate gene and genome-wide association studies (GWAS) have focused on human genetic factors contributing to susceptibility or resistance to TB. To update previous reviews on human genetic factors in TB we searched the MEDLINE database and PubMed for articles from 1 January 2014 through 31 March 2017 and reviewed the role of human genetic variability in TB. Search terms applied in various combinations were 'tuberculosis', 'human genetics', 'candidate gene studies', 'genome-wide association studies' and 'Mycobacterium tuberculosis'. Articles in English retrieved and relevant references cited in these articles were reviewed. Abstracts and reports from meetings were also included. This review provides a recent summary of associations of polymorphisms of human genes with susceptibility/resistance to TB. © 2017 John Wiley & Sons Ltd.

  14. The Structure of Human Memory. Technical Report No. 321.

    Science.gov (United States)

    Brewer, William F.; Pani, John R.

    The four sections of this paper provide an analysis of the structure of human memory. The first section, intended to provide a clear example of personal memory, examines a hypothetical episode in the life of an undergraduate student, and shows how one episode can give rise to three different forms of memory: personal, semantic, and rote…

  15. Applying Human Capital Performance Bonds to Career and Technical Education

    Science.gov (United States)

    Becker, Stacy; Rothschild, Steven

    2015-01-01

    Profound demographic and technological changes are upon us, changes that pose new and evolving challenges requiring fresh approaches from virtually every sector and system. Education is no exception. As fiscal pressures grow, federal, state, and local governments are cutting back where they can, often in human service budgets. Ironically, these…

  16. The contribution of human factors to accidents in the offshore oil industry

    International Nuclear Information System (INIS)

    Gordon, Rachael P.E.

    1998-01-01

    Accidents such as the Piper Alpha disaster illustrate that the performance of a highly complex socio-technical system, is dependent upon the interaction of technical, human, social, organisational, managerial and environmental factors and that these factors can be important co-contributors that could potentially lead to a catastrophic event. The purpose of this article is to give readers an overview of how human factors contribute to accidents in the offshore oil industry. An introduction to human errors and how they relate to human factors in general terms is given. From here the article discusses some of the human factors which were found to influence safety in other industries and describes the human factors codes used in accident reporting forms in the aviation, nuclear and marine industries. Analysis of 25 accident reporting forms from offshore oil companies in the UK sector of the North Sea was undertaken in relation to the human factors. Suggestions on how these accident reporting forms could be improved are given. Finally, this article describes the methods by which accidents can be reduced by focusing on the human factors, such as feedback from accident reporting in the oil industry, auditing of unsafe acts and auditing of latent failures

  17. An analysis of factors that influence the technical efficiency of Malaysian thermal power plants

    International Nuclear Information System (INIS)

    See, Kok Fong; Coelli, Tim

    2012-01-01

    The main objectives of this paper are to measure the technical efficiency levels of Malaysian thermal power plants and to investigate the degree to which various factors influence efficiency levels in these plants. Stochastic frontier analysis (SFA) methods are applied to plant-level data over an eight year period from 1998 to 2005. This is the first comprehensive analysis (to our knowledge) of technical efficiency in the Malaysian electricity generation industry using parametric method. Our empirical results indicate that ownership, plant size and fuel type have a significant influence on technical efficiency levels. We find that publicly-owned power plants obtain average technical efficiencies of 0.68, which is lower than privately-owned power plants, which achieve average technical efficiencies of 0.88. We also observe that larger power plants with more capacity and gas-fired power plants tend to be more technically efficient than other power plants. Finally, we find that plant age and peaking plant type have no statistically significant influence on the technical efficiencies of Malaysian thermal power plants. - Highlights: ► We examine the technical efficiency (TE) levels of Malaysian thermal power plants. ► We also investigate the degree to which various factors influence efficiency levels in these plants. ► Stochastic frontier analysis methods are used. ► Average plant would have to increase their TE level by 21% to reach the efficient frontier. ► Ownership, plant size and fuel type have a significant influence on the TE levels.

  18. Mitochondrial transcription factor A protects human retinal ...

    African Journals Online (AJOL)

    Purpose: To investigate the impact of mitochondrial transcription factor A (TFAM), as a modulator of NF-κB, on proliferation of hypoxia-induced human retinal endothelial cell (HREC), and the probable mechanism. Methods: After exposure to hypoxia (1 % O2) for 5 days, cell proliferation and cell cycle of HREC were ...

  19. The human factors approach at EDF

    International Nuclear Information System (INIS)

    Colas, A.

    2004-01-01

    At the dawn of the 21st century, French electricity utility EDF is facing a number of major changes, in particular the liberalisation of European energy markets and the restructuring needed to cope with this development. EDF's approach to human factors (HF) aspects is also undergoing major changes, since people obviously play a predominant role in any organisational structure. (author)

  20. Warranty claim analysis considering human factors

    International Nuclear Information System (INIS)

    Wu Shaomin

    2011-01-01

    Warranty claims are not always due to product failures. They can also be caused by two types of human factors. On the one hand, consumers might claim warranty due to misuse and/or failures caused by various human factors. Such claims might account for more than 10% of all reported claims. On the other hand, consumers might not be bothered to claim warranty for failed items that are still under warranty, or they may claim warranty after they have experienced several intermittent failures. These two types of human factors can affect warranty claim costs. However, research in this area has received rather little attention. In this paper, we propose three models to estimate the expected warranty cost when the two types of human factors are included. We consider two types of failures: intermittent and fatal failures, which might result in different claim patterns. Consumers might report claims after a fatal failure has occurred, and upon intermittent failures they might report claims after a number of failures have occurred. Numerical examples are given to validate the results derived.

  1. Human factors in healthcare level two

    CERN Document Server

    Rosenorn-Lanng, Debbie

    2015-01-01

    This book builds on Human Factors in Healthcare Level One by delving deeper into the challenges of leadership, conflict resolution, and decision making that healthcare professionals currently face. It is written in an easy to understand style and includes a wealth of real-life examples of errors and patient safety issues.

  2. Cooperative mobility systems: The human factor challenges.

    NARCIS (Netherlands)

    Martens, Marieke; Kroon, Elisabeth

    2014-01-01

    This paper presents a vision on cooperative mobility systems from a human factors perspective. To create a common ground for future developments, it’s important to define the common research themes and knowledge gaps. This article presents what steps need to be taken in order to come to proper

  3. Review of human factors guidelines and methods

    International Nuclear Information System (INIS)

    Rhodes, W.; Szlapetis, I.; Hay, T.; Weihrer, S.

    1995-04-01

    The review examines the use of human factors guidelines and methods in high technology applications, with emphasis on application to the nuclear industry. An extensive literature review was carried out identifying over 250 applicable documents, with 30 more documents identified during interviews with experts in human factors. Surveys were sent to 15 experts, of which 11 responded. The survey results indicated guidelines used and why these were favoured. Thirty-three of the most applicable guideline documents were described in detailed annotated bibliographies. A bibliographic list containing over 280 references was prepared. Thirty guideline documents were rated for their completeness, validity, applicability and practicality. The experts survey indicated the use of specific techniques. Ten human factors methods of analysis were described in general summaries, including procedures, applications, and specific techniques. Detailed descriptions of the techniques were prepared and each technique rated for applicability and practicality. Recommendations for further study of areas of importance to human factors in the nuclear field in Canada are given. (author). 8 tabs., 2 figs

  4. Review of human factors guidelines and methods

    Energy Technology Data Exchange (ETDEWEB)

    Rhodes, W; Szlapetis, I; Hay, T; Weihrer, S [Rhodes and Associates Inc., Toronto, ON (Canada)

    1995-04-01

    The review examines the use of human factors guidelines and methods in high technology applications, with emphasis on application to the nuclear industry. An extensive literature review was carried out identifying over 250 applicable documents, with 30 more documents identified during interviews with experts in human factors. Surveys were sent to 15 experts, of which 11 responded. The survey results indicated guidelines used and why these were favoured. Thirty-three of the most applicable guideline documents were described in detailed annotated bibliographies. A bibliographic list containing over 280 references was prepared. Thirty guideline documents were rated for their completeness, validity, applicability and practicality. The experts survey indicated the use of specific techniques. Ten human factors methods of analysis were described in general summaries, including procedures, applications, and specific techniques. Detailed descriptions of the techniques were prepared and each technique rated for applicability and practicality. Recommendations for further study of areas of importance to human factors in the nuclear field in Canada are given. (author). 8 tabs., 2 figs.

  5. Human factors considerations for reliability and safety

    International Nuclear Information System (INIS)

    Carnino, A.

    1985-01-01

    Human factors in many industries have become an important issue, since the last few years. They should be considered during the whole life time of a plant: design, fabrication and construction, licensing, operation. Improvements have been performed in the field of man-machine interface such as procedures, control room lay-out, operator aids, training. In order to meet the needs of reliability and probabilistic risk studies, quantification of human errors has been developed but needs still improvements in the field of cognitive behaviour, diagnosis and representation errors. Data banks to support these quantifications are still in a development stage. This applies to nuclear power plants and several examples are given to illustrate the above ideas. In conclusion, human factors field is in a very quickly evolving process but the tendency is still to adapt the man to the machines whilst the reverse would be desirable

  6. An EDF perspective on human factors

    International Nuclear Information System (INIS)

    Carnino, A.

    1989-01-01

    The paper presents the main lines of the program undertaken by Electricite de France in the field of human factors as a result of the Three-Mile Island (TMI) accident. As it is important to be aware of some human characteristics to understand the difficulties and needs in the field, the following behaviour characteristics are described: man is not a component, man functions through a single channel, man has a continuous need of information, man biases risk estimation and man uses mental representations. The following actions taken after TMI to improve the man-machine interface, the operator training, the crew organisation, the operating experience analysis, the state approach development and the emergency planning, are all linked to human factors. The paper ends by presenting the new control room studies for the N4 project (a light water reactor) and some other actions aimed at improving plant operation. (author)

  7. Do we need sustainability as a new approach in human factors and ergonomics?

    Science.gov (United States)

    Zink, Klaus J; Fischer, Klaus

    2013-01-01

    The International Ergonomics Association Technical Committee 'Human Factors and Sustainable Development' was established to contribute to a broad discourse about opportunities and risks resulting from current societal 'mega-trends' and their impacts on the interactions among humans and other elements of a system, e.g. in work systems. This paper focuses on the underlying key issues: how do the sustainability paradigm and human factors/ergonomics interplay and interact, and is sustainability necessary as a new approach for our discipline? Based on a discussion of the sustainability concept, some general principles for designing new and enhancing existent approaches of human factors and ergonomics regarding their orientation towards sustainability are proposed. The increasing profile of sustainability on the international stage presents new opportunities for human factors/ergonomics. Positioning of the sustainability paradigm within human factors/ergonomics is discussed. Approaches to incorporating sustainability in the design of work systems are considered.

  8. Human Factors Principles in Information Dashboard Design

    Energy Technology Data Exchange (ETDEWEB)

    Hugo, Jacques V.; St. Germain, Shawn

    2016-06-01

    When planning for control room upgrades, nuclear power plants have to deal with a multitude of engineering and operational impacts. This will inevitably include several human factors considerations, including physical ergonomics of workstations, viewing angles, lighting, seating, new communication requirements, and new concepts of operation. In helping nuclear power utilities to deal with these challenges, the Idaho National Laboratory (INL) has developed effective methods to manage the various phases of the upgrade life cycle. These methods focus on integrating human factors engineering processes with the plant’s systems engineering process, a large part of which is the development of end-state concepts for control room modernization. Such an end-state concept is a description of a set of required conditions that define the achievement of the plant’s objectives for the upgrade. Typically, the end-state concept describes the transition of a conventional control room, over time, to a facility that employs advanced digital automation technologies in a way that significantly improves system reliability, reduces human and control room-related hazards, reduces system and component obsolescence, and significantly improves operator performance. To make the various upgrade phases as concrete and as visible as possible, an end-state concept would include a set of visual representations of the control room before and after various upgrade phases to provide the context and a framework within which to consider the various options in the upgrade. This includes the various control systems, human-system interfaces to be replaced, and possible changes to operator workstations. This paper describes how this framework helps to ensure an integrated and cohesive outcome that is consistent with human factors engineering principles and also provide substantial improvement in operator performance. The paper further describes the application of this integrated approach in the

  9. Considerations of Human Factors in the Design and Operation of Research Reactors

    International Nuclear Information System (INIS)

    Shokr, A.M.

    2015-01-01

    The feedback from the severe accidents occurred at nuclear power plants showed that safety of nuclear installations does not depend only on technical matters but also on human performance. Human errors can initiate an event or can make , by intervention, the event consequences worse. Human factors are of a particular importance for research reactors since the status of these facilities change frequently and the operators have an easy access to the reactor core and to the associated experimental facilities. This paper discusses the experience with human factors and their impact on the safety of research reactors and application of technical and administrative provisions to address these factors in the design and operation phases of research reactors for continuous improvements in safety and performance of these facilities

  10. Technical factors that affect anastomotic integrity following esophagectomy: systematic review and meta-analysis.

    Science.gov (United States)

    Markar, Sheraz R; Arya, Shobhit; Karthikesalingam, Alan; Hanna, George B

    2013-12-01

    Due to the significant contribution of anastomotic leak, with its disastrous consequences to patient morbidity and mortality, multiple parameters have been proposed and individually meta-analyzed for the formation of the ideal esophagogastric anastomosis following cancer resection. The purpose of this pooled analysis was to examine the main technical parameters that impact on anastomotic integrity. Medline, Embase, trial registries, and conference proceedings were searched. Technical factors evaluated included hand-sewn versus stapled esophagogastric anastomosis (EGA), cervical versus thoracic EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. The outcome of interest was the incidence of anastomotic leak, for which pooled odds ratios were calculated for each technical factor. No significant difference in the incidence of anastomotic leak was demonstrated for the following technical factors: hand-sewn versus stapled EGA, minimally invasive versus open esophagectomy, anterior versus posterior route of reconstruction and ischemic conditioning of the gastric conduit. Four randomized, controlled trials comprising 298 patients were included that compared cervical and thoracic EGA. Anastomotic leak was seen more commonly in the cervical group (13.64 %) than in the thoracic group (2.96 %). Pooled analysis demonstrated a significantly increased incidence of anastomotic leak in the cervical group (pooled odds ratio = 4.73; 95 % CI 1.61-13.9; P = 0.005). A tailored surgical approach to the patient's physiology and esophageal cancer stage is the most important factor that influences anastomotic integrity after esophagectomy.

  11. Human factors estimation methods using physiological informations

    International Nuclear Information System (INIS)

    Takano, Ken-ichi; Yoshino, Kenji; Nakasa, Hiroyasu

    1984-01-01

    To enhance the operational safety in the nuclear power plant, it is necessary to decrease abnormal phenomena due to human errors. Especially, it is essential to basically understand human behaviors under the work environment for plant maintenance workers, inspectors, and operators. On the above stand point, this paper presents the results of literature survey on the present status of human factors engineering technology applicable to the nuclear power plant and also discussed the following items: (1) Application fields where the ergonomical evaluation is needed for workers safety. (2) Basic methodology for investigating the human performance. (3) Features of the physiological information analysis among various types of ergonomical techniques. (4) Necessary conditions for the application of in-situ physiological measurement to the nuclear power plant. (5) Availability of the physiological information analysis. (6) Effectiveness of the human factors engineering methodology, especially physiological information analysis in the case of application to the nuclear power plant. The above discussions lead to the demonstration of high applicability of the physiological information analysis to nuclear power plant, in order to improve the work performance. (author)

  12. Human Factors in the Management of Production

    DEFF Research Database (Denmark)

    Jensen, Per Langå; Alting, Leo

    2006-01-01

    The ‘Human factor’ is a major issue when optimizing manufacturing systems. The development in recommendations on how to handle this factor in the management of production reflects the change in dominating challenges faced by production in society. Presently, industrial societies are meeting new...... challenges. Qualitative interviews with Danish stakeholders in the education of engineers (BA & MA) confirm the picture given in international literature. Therefore, the didactics concerning the ‘human factor’ in the curriculum on production management has to reflect these changes. This paper concludes...

  13. Human factors issues in fuel handling

    Energy Technology Data Exchange (ETDEWEB)

    Beattie, J D; Iwasa-Madge, K M; Tucker, D A [Humansystems Inc., Milton, ON (Canada)

    1994-12-31

    The staff of the Atomic Energy Control Board wish to further their understanding of human factors issues of potential concern associated with fuel handling in CANDU nuclear power stations. This study contributes to that objective by analysing the role of human performance in the overall fuel handling process at Ontario Hydro`s Darlington Nuclear Generating Station, and reporting findings in several areas. A number of issues are identified in the areas of design, operating and maintenance practices, and the organizational and management environment. 1 fig., 4 tabs., 19 refs.

  14. Vertically integrated analysis of human DNA. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Olson, M.

    1997-10-01

    This project has been oriented toward improving the vertical integration of the sequential steps associated with the large-scale analysis of human DNA. The central focus has been on an approach to the preparation of {open_quotes}sequence-ready{close_quotes} maps, which is referred to as multiple-complete-digest (MCD) mapping, primarily directed at cosmid clones. MCD mapping relies on simple experimental steps, supported by advanced image-analysis and map-assembly software, to produce extremely accurate restriction-site and clone-overlap maps. We believe that MCD mapping is one of the few high-resolution mapping systems that has the potential for high-level automation. Successful automation of this process would be a landmark event in genome analysis. Once other higher organisms, paving the way for cost-effective sequencing of these genomes. Critically, MCD mapping has the potential to provide built-in quality control for sequencing accuracy and to make possible a highly integrated end product even if there are large numbers of discontinuities in the actual sequence.

  15. Study on human factor at NPP

    International Nuclear Information System (INIS)

    Nopp, I.

    1984-01-01

    Factors affecting the reliabilty of the reactor control by an NPP operator are considered on the base of the Czechoslovakia NPP operating experience. The reliability level of NPP operators depends on objective factors (conditions and regime of labour) determining the labour productivity and on subjective ones (psychological morale, physical and mental abilities and occupational level of personnel). Problems of the effect of physical and mental abilities and professional level on the reliability of personnel are considered to be the most important ones. The effect of individual abilities and specific features of the human body on changes in his occupational abilities can be estimated only to a certain degree

  16. Missing focus on Human Factors - organizational and cognitive ergonomics - in the safety management for the petroleum industry.

    Science.gov (United States)

    Johnsen, Stig O; Kilskar, Stine Skaufel; Fossum, Knut Robert

    2017-08-01

    More attention has recently been given to Human Factors in petroleum accident investigations. The Human Factors areas examined in this article are organizational, cognitive and physical ergonomics. A key question to be explored is as follows: To what degree are the petroleum industry and safety authorities in Norway focusing on these Human Factors areas from the design phase? To investigate this, we conducted an innovative exploratory study of the development of four control centres in Norwegian oil and gas industry in collaboration between users, management and Human Factors experts. We also performed a literature survey and discussion with the professional Human Factors network in Norway. We investigated the Human Factors focus, reasons for not considering Human Factors and consequences of missing Human Factors in safety management. The results revealed an immature focus and organization of Human Factors. Expertise on organizational ergonomics and cognitive ergonomics are missing from companies and safety authorities and are poorly prioritized during the development. The easy observable part of Human Factors (i.e. physical ergonomics) is often in focus. Poor focus on Human Factors in the design process creates demanding conditions for human operators and impact safety and resilience. There is lack of non-technical skills such as communication and decision-making. New technical equipment such as Closed Circuit Television is implemented without appropriate use of Human Factors standards. Human Factors expertise should be involved as early as possible in the responsible organizations. Verification and validation of Human Factors should be improved and performed from the start, by certified Human Factors experts in collaboration with the workforce. The authorities should check-back that the regulatory framework of Human Factors is communicated, understood and followed.

  17. Safety Requirements and Modern Technical Requirements in Human Information Systems in Amman Hotels

    OpenAIRE

    Farouq Ahmad Alazzam; Sattam Rakan Allahawiah; Mohammad Nayef Alsarayreh; Kafa Hmoud Abdallah al Nawaiseh

    2015-01-01

    This study aimed to demonstrate the availability of Safety requirements and modern technical requirements in human information systems in Amman hotels. an the most important results of this study is the availability of security and safety requirements in human information systems In Amman hotels and The adequacy of the information that it provided .and show that all departments are not connected by appropriate and effective communication networks in adequate form . Also sophisticated operatin...

  18. Human factor in the operation of the Dukovany nuclear power plant

    International Nuclear Information System (INIS)

    Kostiha, Frantisek; Pleskac, Frantisek

    2009-01-01

    The human factor, i.e. the action of man within complex technical systems, has been in the focus of the Dukovany NPP management constantly. The paper gives an overview of the plant strategy regarding human factor issues, such as training, human factor prevention methods and practices to improve the resistance of the system to human error, the use of information systems, and operational feedback from the role of the human factor and influence of the operators on the initiation, development and resulting level of severity of operational events. The method of monitoring and assessment of the quality of human performance at the Dukovany plant on an ongoing basis aimed at a constant improvement is highlighted. (orig.)

  19. Human factors engineering in nuclear plant rehabilitations

    International Nuclear Information System (INIS)

    Bernston, K.; Remisz, M.; Malcolm, S.

    2001-01-01

    There are several unique considerations when creating and maintaining a human factors program for a plant refurbishment. These consideration arise from a variety of sources, including budget and time constraints on life extension projects, working to existing plant protocols and current acceptable HFE practices, and issues relating to function and task analysis. This results in a need to streamline and carefully time HFE practices from project start up to completion. In order to perform this task adequately, a comprehensive Human Factors Engineering Program Plan should be designed and tailored to the project. Systems of planning and prioritization are essential, and the required HFE designer training needs to be established. HFE specialists need to be aware of the existing plant constraints, and he prepared to work within them when providing support. The current paper discusses these aspects in the context of major refurbishment work at CANDU stations. (author)

  20. A human factors approach to effective maintenance

    International Nuclear Information System (INIS)

    Penington, J.; Shakeri, S.

    2006-01-01

    Traditionally in the field of Human Factors within the nuclear industry, the focus has been to identify the potential for human errors in operating tasks, and develop strategies to prevent their occurrence, provide recovery mechanisms, and mitigate the consequences of error as appropriate. Past experience has demonstrated however a significant number of human errors within the nuclear industry occur during maintenance tasks. It is for this reason, and the fact that our nuclear power plants are ageing and increasingly in need of maintenance, that the industry must pay more attention to maintenance tasks. The purpose of this paper is to present a framework for effective maintenance programs, and based upon this framework discuss an approach (an audit tool) that can be used to both design such a program, and to assess existing programs. In addition, this tool can form the basis of cost benefit decisions relating to priorities for improvements to existing programs. (author)

  1. Immune Defence Factors In Human Milk

    Directory of Open Access Journals (Sweden)

    Kumar Sanjeev

    1985-01-01

    Full Text Available Scientific evidence is accumulating to prove the nutritional, anti-infective, anti-fertility, psychosomal and economic advantages of breast-feeding. A number of studies have shown that breast milk protects against diarrheal, respiratory and other infections. Its value in protecting against allergy has also been established. This article reviews the studies on various immune defence factors present in the human milk. The available scientific knowledge makes a very strong case in favour of promoting breast-feeding.

  2. The development of human factors technologies -The development of human factors experimental evaluation techniques-

    International Nuclear Information System (INIS)

    Shim, Bong Sik; Oh, In Suk; Cha, Kyung Hoh; Lee, Hyun Chul

    1995-07-01

    In this year, we studied the followings: 1) Development of operator mental workload evaluation techniques, 2) Development of a prototype for preliminary human factors experiment, 3) Suitability test of information display on a large scale display panel, 4) Development of guidelines for VDU-based control room design, 5) Development of integrated test facility (ITF). 6) Establishment of an eye tracking system, and we got the following results: 1) Mental workload evaluation techniques for MMI evaluation, 2) PROTOPEX (PROTOtype for preliminary human factors experiment) for preliminary human factors experiments, 3) Usage methods of APTEA (Analysis-Prototyping-Training-Experiment-Analysis) experiment design, 4) Design guidelines for human factors verification, 5) Detail design requirements and development plan of ITF, 6) Eye movement measurement system. 38 figs, 20 tabs, 54 refs. (Author)

  3. Double Shell Tank (DST) Human Factors Study

    International Nuclear Information System (INIS)

    CHAFFEE, G.A.

    1994-01-01

    This report documents the data collection and analyses that were performed in development of material to be used in the Human Factors chapter for the upgrade to the Safety Analysis Report (SAR) for the Double-Shell Tank Farms (DSTF). This study was conducted to collect the data that is necessary to prepare the Human Factors chapter for the upgrade of the SAR for the DSTF. Requirements for the HF chapter of the SAR generally dictate that the facility management describe how the consideration of operator capabilities and limitations and operating experience are used in ensuring the safe and effective operation of the facility. Additionally, analysis to indicate the contribution of human error to the safety basis accidents or events must be reported. Since the DSTF is a mature operating facility and the requirement to prepare a HF chapter is new, it was not expected that the consideration of HF principles would be an explicit part of DSTF operations. It can be expected, however, that the programs that guide the daily operations at the DSTF contain provisions for the consideration of the needs of their operating personnel and lessons learned from prior experience. Consideration of both the SAR requirements and the nature of the DSTF operations led to the following objectives being defined for the study: (1) to identify the programs at the OSTF where human performance may be considered; (2) to describe how HF principles and operating experience are used to ensure safe and reliable human performance at the DSTF; (3) to describe how HF principles and operating experience are considered as modifications or improvements are made at the DSTF; and (4) to perform task analysis sufficient to understand the potential for human error in OSTF operations

  4. Seasonal variation in human reproduction: environmental factors.

    Science.gov (United States)

    Bronson, F H

    1995-06-01

    Almost all human populations exhibit seasonal variation in births, owing mostly to seasonal variation in the frequency of conception. This review focuses on the degree to which environmental factors like nutrition, temperature and photoperiod contribute to these seasonal patterns by acting directly on the reproductive axis. The reproductive strategy of humans is basically that of the apes: Humans have the capacity to reproduce continuously, albeit slowly, unless inhibited by environmental influences. Two, and perhaps three, environmental factors probably act routinely as seasonal inhibitors in some human populations. First, it seems likely that ovulation is regulated seasonally in populations experiencing seasonal variation in food availability. More specifically, it seems likely that inadequate food intake or the increased energy expenditure required to obtain food, or both, can delay menarche, suppress the frequency of ovulation in the nonlactating adult, and prolong lactational amenorrhea in these populations on a seasonal basis. This action is most easily seen in tropical subsistence societies where food availability often varies greatly owing to seasonal variation in rainfall; hence births in these populations often correlate with rainfall. Second, it seems likely that seasonally high temperatures suppress spermatogenesis enough to influence the incidence of fertilization in hotter latitudes, but possibly only in males wearing clothing that diminishes scrotal cooling. Since most of our knowledge about this phenomenon comes from temperate latitudes, the sensitivity of spermatogenesis in both human and nonhuman primates to heat in the tropics needs further study. It is quite possible that high temperatures suppress ovulation and early embryo survival seasonally in some of these same populations. Since we know less than desired about the effect of heat stress on ovulation and early pregnancy in nonhuman mammals, and nothing at all about it in humans or any of the

  5. Activated human neutrophils release hepatocyte growth factor/scatter factor.

    LENUS (Irish Health Repository)

    McCourt, M

    2012-02-03

    BACKGROUND: Hepatocyte growth factor or scatter factor (HGF\\/SF) is a pleiotropic cytokine that has potent angiogenic properties. We have previously demonstrated that neutrophils (PMN) are directly angiogenic by releasing vascular endothelial growth factor (VEGF). We hypothesized that the acute inflammatory response can stimulate PMN to release HGF. AIMS: To examine the effects of inflammatory mediators on PMN HGF release and the effect of recombinant human HGF (rhHGF) on PMN adhesion receptor expression and PMN VEGF release. METHODS: In the first experiment, PMN were isolated from healthy volunteers and stimulated with tumour necrosis factor-alpha (TNF-alpha), lipopolysaccharide (LPS), interleukin-8 (IL-8), and formyl methionyl-leucyl-phenylalanine (fMLP). Culture supernatants were assayed for HGF using ELISA. In the second experiment, PMN were lysed to measure total HGF release and HGF expression in the PMN was detected by Western immunoblotting. Finally, PMN were stimulated with rhHGF. PMN CD 11a, CD 11b, and CD 18 receptor expression and VEGF release was measured using flow cytometry and ELISA respectively. RESULTS: TNF-alpha, LPS and fMLP stimulation resulted in significantly increased release of PMN HGF (755+\\/-216, 484+\\/-221 and 565+\\/-278 pg\\/ml, respectively) compared to controls (118+\\/-42 pg\\/ml). IL-8 had no effect. Total HGF release following cell lysis and Western blot suggests that HGF is released from intracellular stores. Recombinant human HGF did not alter PMN adhesion receptor expression and had no effect on PMN VEGF release. CONCLUSIONS: This study demonstrates that pro-inflammatory mediators can stimulate HGF release from a PMN intracellular store and that activated PMN in addition to secreting VEGF have further angiogenic potential by releasing HGF.

  6. Workforce scheduling: A new model incorporating human factors

    Directory of Open Access Journals (Sweden)

    Mohammed Othman

    2012-12-01

    Full Text Available Purpose: The majority of a company’s improvement comes when the right workers with the right skills, behaviors and capacities are deployed appropriately throughout a company. This paper considers a workforce scheduling model including human aspects such as skills, training, workers’ personalities, workers’ breaks and workers’ fatigue and recovery levels. This model helps to minimize the hiring, firing, training and overtime costs, minimize the number of fired workers with high performance, minimize the break time and minimize the average worker’s fatigue level.Design/methodology/approach: To achieve this objective, a multi objective mixed integer programming model is developed to determine the amount of hiring, firing, training and overtime for each worker type.Findings: The results indicate that the worker differences should be considered in workforce scheduling to generate realistic plans with minimum costs. This paper also investigates the effects of human fatigue and recovery on the performance of the production systems.Research limitations/implications: In this research, there are some assumptions that might affect the accuracy of the model such as the assumption of certainty of the demand in each period, and the linearity function of Fatigue accumulation and recovery curves. These assumptions can be relaxed in future work.Originality/value: In this research, a new model for integrating workers’ differences with workforce scheduling is proposed. To the authors' knowledge, it is the first time to study the effects of different important human factors such as human personality, skills and fatigue and recovery in the workforce scheduling process. This research shows that considering both technical and human factors together can reduce the costs in manufacturing systems and ensure the safety of the workers.

  7. Human factors engineering program review model

    International Nuclear Information System (INIS)

    1994-07-01

    The staff of the Nuclear Regulatory Commission is performing nuclear power plant design certification reviews based on a design process plan that describes the human factors engineering (HFE) program elements that are necessary and sufficient to develop an acceptable detailed design specification and an acceptable implemented design. There are two principal reasons for this approach. First, the initial design certification applications submitted for staff review did not include detailed design information. Second, since human performance literature and industry experiences have shown that many significant human factors issues arise early in the design process, review of the design process activities and results is important to the evaluation of an overall design. However, current regulations and guidance documents do not address the criteria for design process review. Therefore, the HFE Program Review Model (HFE PRM) was developed as a basis for performing design certification reviews that include design process evaluations as well as review of the final design. A central tenet of the HFE PRM is that the HFE aspects of the plant should be developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The HFE PRM consists of ten component elements. Each element in divided into four sections: Background, Objective, Applicant Submittals, and Review Criteria. This report describes the development of the HFE PRM and gives a detailed description of each HFE review element

  8. Crew systems: integrating human and technical subsystems for the exploration of space

    Science.gov (United States)

    Connors, M. M.; Harrison, A. A.; Summit, J.

    1994-01-01

    Space exploration missions will require combining human and technical subsystems into overall "crew systems" capable of performing under the rigorous conditions of outer space. This report describes substantive and conceptual relationships among humans, intelligent machines, and communication systems, and explores how these components may be combined to complement and strengthen one another. We identify key research issues in the combination of humans and technology and examine the role of individual differences, group processes, and environmental conditions. We conclude that a crew system is, in effect, a social cyborg, a living system consisting of multiple individuals whose capabilities are extended by advanced technology.

  9. Human Factors in Accidents Involving Remotely Piloted Aircraft

    Science.gov (United States)

    Merlin, Peter William

    2013-01-01

    This presentation examines human factors that contribute to RPA mishaps and provides analysis of lessons learned. RPA accident data from U.S. military and government agencies were reviewed and analyzed to identify human factors issues. Common contributors to RPA mishaps fell into several major categories: cognitive factors (pilot workload), physiological factors (fatigue and stress), environmental factors (situational awareness), staffing factors (training and crew coordination), and design factors (human machine interface).

  10. Human factors in nuclear power plants

    International Nuclear Information System (INIS)

    Hennig, J.; Bohr, E.

    1976-04-01

    This annotated bibliography is a first attempt to give a survey of the kind of literature which is relevant for the ergonomic working conditions in nuclear power plants. Such a survey seems to be useful in view of the fact that the 'factor human being' comes recently more and more to the fore in nuclear power plants. In this context, the necessity is often pointed out to systematically include our knowledge of the performance capacity and limits of human beings when designing the working conditions for the personnel of nuclear power plants. For this reason, the bibliography is so much intended for the ergonomics experts as for the experts of nuclear engineering. (orig./LN) [de

  11. Factors associated to performance efficacy of technical-tactical actions in volleyball

    Directory of Open Access Journals (Sweden)

    William das Neves Salles

    2017-05-01

    Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2017v19n1p74   The aim of the study was to investigate the factors associated to performance efficacy of technical-tactical actions in volleyball. Based on the protocol of the Instrument for Technical and Tactical Performance Assessment in Volleyball (IAD-VB, 44.025 match actions performed by male and female athletes from u-15, u-16 and u-17 finalist teams of the 2010 Santa Catarina Volleyball Championship in Brazil were observed. Data were analyzed on SPPS 21 software using the logistic regression technique, adopting 5% significance level for the interpretation of results. Adjusted model explained 51.40% efficacy variance, and the factors associated with this variable were decision making, adjustment, efficiency, and competition level.

  12. State of science: human factors and ergonomics in healthcare.

    Science.gov (United States)

    Hignett, Sue; Carayon, Pascale; Buckle, Peter; Catchpole, Ken

    2013-01-01

    The past decade has seen an increase in the application of human factors and ergonomics (HFE) techniques to healthcare delivery in a broad range of contexts (domains, locations and environments). This paper provides a state of science commentary using four examples of HFE in healthcare to review and discuss analytical and implementation challenges and to identify future issues for HFE. The examples include two domain areas (occupational ergonomics and surgical safety) to illustrate a traditional application of HFE and the area that has probably received the most research attention. The other two examples show how systems and design have been addressed in healthcare with theoretical approaches for organisational and socio-technical systems and design for patient safety. Future opportunities are identified to develop and embed HFE systems thinking in healthcare including new theoretical models and long-term collaborative partnerships. HFE can contribute to systems and design initiatives for both patients and clinicians to improve everyday performance and safety, and help to reduce and control spiralling healthcare costs. There has been an increase in the application of HFE techniques to healthcare delivery in the past 10 years. This paper provides a state of science commentary using four illustrative examples (occupational ergonomics, design for patient safety, surgical safety and organisational and socio-technical systems) to review and discuss analytical and implementation challenges and identify future issues for HFE.

  13. Risky business: human factors in critical care.

    Science.gov (United States)

    Laussen, Peter C; Allan, Catherine K; Larovere, Joan M

    2011-07-01

    Remarkable achievements have occurred in pediatric cardiac critical care over the past two decades. The specialty has become well defined and extremely resource intense. A great deal of focus has been centered on optimizing patient outcomes, particularly mortality and early morbidity, and this has been achieved through a focused and multidisciplinary approach to management. Delivering high-quality and safe care is our goal, and during the Risky Business symposium and simulation sessions at the Eighth International Conference of the Pediatric Cardiac Intensive Care Society in Miami, December 2010, human factors, systems analysis, team training, and lessons learned from malpractice claims were presented.

  14. Diabetes technology and the human factor.

    Science.gov (United States)

    Liberman, A; Buckingham, B; Phillip, M

    2011-02-01

    When developing new technologies for human use the developer should take into consideration not only the efficacy and safety of the technology but also the desire and capabilities of the potential user. Any chronic disease is a challenge for both the patient and his/her caregivers. This statement is especially true in the case of patients with type 1 diabetes mellitus (T1DM) where adherence to therapy is crucial 24 hours a day 365 days a year. No vacation days are possible for the T1DM patient. It is therefore obvious why any new technology which is developed for helping patients cope with the disease should take into consideration the 'human factor' before, during and after the production process starts. There is no doubt that technology has changed the life of patients with T1DM in the last few decades, but despite the availability of new meters, new syringes, new sophisticated insulin pumps and continuous glucose sensors and communication tools, these technologies have not been well utilised by many patients. It is therefore important to understand why the technology is not always utilised and to find new ways to maximise use and benefits from the technology to as many patients as possible. The present chapter will review papers published in the last year where the patient's ability or willingness was an important factor in the success of the technology. We will try to understand why insulin pumps, glucose sensors and self-monitoring of blood glucose (SMBG) are not used enough or appropriately, whether there is a specific group that finds it more difficult than others to adopt new technologies and what can be done to overcome that issue. For this chapter we chose articles from a Public Medicine review of the literature related to human factors affecting the outcome of studies and of user acceptance of continuous glucose monitoring, insulin infusion pump therapy. We also searched the literature in the field of psychology in order to accurately define the problems

  15. Review of EPRI Nuclear Human Factors Program

    International Nuclear Information System (INIS)

    Hanes, L.F.; O'Brien, J.F.

    1996-01-01

    The Electric Power Research Institute (EPRI) Human Factors Program, which is part of the EPRI Nuclear Power Group, was established in 1975. Over the years, the Program has changed emphasis based on the shifting priorities and needs of the commercial nuclear power industry. The Program has produced many important products that provide significant safety and economic benefits for EPRI member utilities. This presentation will provide a brief history of the Program and products. Current projects and products that have been released recently will be mentioned

  16. Clarification of the technic of intrinsic factor radioimmunoassay for the cat and the rat

    International Nuclear Information System (INIS)

    Perrin, M.O.; Nicolas, J.P.; Dubrasquet, M.

    1983-01-01

    Cats and rats secrete very small quantities of gastric juice (GJ). In order to measure the Intrinsic Factor (IF) in GJ of animals certain modifications are necessary. It is very important to select with great care pernicious anemia sera which will be used to cross react with the animals' IF to determine their IF level by radioimmunoassay. The technic described here enables the dosage of low quantities of IF with a 7 per cent coefficient of variation [fr

  17. The human failure factors during emergency operating

    International Nuclear Information System (INIS)

    Liu Bingji

    1994-01-01

    In the case of emergency operating, operating staff usually are in the limit state of mind, so the operating mistake rate will go up sharply, and the disastrous accidents usually will happen at this moment. So to study and resolve the problem is very important and imperative. Basing on raising the reliability of man-machine system, the psychology and pathology of operating staff under the limit state and the behavior characteristic of operating staff in the emergency operation have been expounded here, and the operating staff's psychological gradation partitioned by foreign experts also has been introduced, and the influence factors of psychology and equipment which lead to the limit state of mind also have been analyzed. In addition, taking the emergency operation of the nuclear power plant as a example, The authors has studied the countermeasures to prevent the limit state from occurring, which includes countermeasures to environment effects, measures to improve the technical equipment and the measures that the operating staff should be taken

  18. Applications of human factors engineering in the digital HMI

    International Nuclear Information System (INIS)

    Zhou Bingjian

    2014-01-01

    In order to prevent and minimize human errors in the digital main control room, the principles of human factors engineering must be complied strictly in the design process of digital human-machine interface. This paper briefly describes the basic human factors engineering principles of designing main control room, introduces the main steps to implement the human factors engineering verification and validation of main control room, including HSI task support verification, human factors engineering design verification and integrated system validation. Meanwhile, according to the new digital human-machine interface characteristics, the development models of human error are analyzed. (author)

  19. [Interaction of human factor X with thromboplastin].

    Science.gov (United States)

    Kiselev, S V; Zubairov, D M; Timarbaev, V N

    2003-01-01

    The binding of 125I-labeled human factor X to native and papaine-treated tissue tromboplastin in the presence of CaCl2 or EDTA was studied. The Scatchard analysis suggests the existence of high (Kd=l,8 x10(-9) M) and low affinity binding sites on the thromboplastin surface. The removal of Ca2+ reduced affinity of factor X to the high affinity sites. This was accompanied by some increase of their number. Proteolysis by papaine decreased affinity of high affinity sites and caused the increase of their number in the presence of Ca2+. In the absence of Ca2+ the affinity remained unchanged, but the number of sites decreased. At low concentrations of factor X positive cooperativity for high affinity binding sites was observed. It did not depend on the presence of Ca2+. The results indirectly confirm the role of hydrophobic interactons in Ca2+ dependent binding of factor X to thromboplastin and the fact that heterogeneity of this binding is determined by mesophase structure of the thromboplastin phospholipids.

  20. Human Resource Managements as a part of the Human Factors Management Program(HFMP) for Nuclear Power Plants

    International Nuclear Information System (INIS)

    Kim, DaeHo; Lee, YongHee; Lee, JungWoon; Kim, Younggab

    2007-01-01

    Programs for the effective implementation and management of human factor issues in nuclear power plants (NPPs) should contain technical criteria, an establishment of a job process, and activities for job improvements and be a system through which human factors can be managed in an integrated way. Human factors to be managed should include those related to an operation of plants as well as those related to a plant design as mentioned in NUREG-0800(2004), NUREG- 0711(2004), and NUREG-0700(2002). Human factor items to be managed for an operation of plants are listed in the PSR (Periodic Safety Review) items defined in the Enforcement of Regulation of the Atomic Energy Act. They are procedures, a work management system including a shift work management, a qualification management of plant personnel, training, a work amount assessment, a MMI (Man Machine Interface), and the use of experience. Among these factors, factors related to a human resource management include work management systems and the status of a work management including shift work, a qualification management ensuring qualified workers on duty at all times, and the systems for and the status of training and education. This paper addresses the scope of a human resource management, guidelines and procedures to be developed for a human resource management, and considerations critical in the development of guidelines and procedures

  1. Technical factors influencing cone packing density estimates in adaptive optics flood illuminated retinal images.

    Directory of Open Access Journals (Sweden)

    Marco Lombardo

    Full Text Available PURPOSE: To investigate the influence of various technical factors on the variation of cone packing density estimates in adaptive optics flood illuminated retinal images. METHODS: Adaptive optics images of the photoreceptor mosaic were obtained in fifteen healthy subjects. The cone density and Voronoi diagrams were assessed in sampling windows of 320×320 µm, 160×160 µm and 64×64 µm at 1.5 degree temporal and superior eccentricity from the preferred locus of fixation (PRL. The technical factors that have been analyzed included the sampling window size, the corrected retinal magnification factor (RMFcorr, the conversion from radial to linear distance from the PRL, the displacement between the PRL and foveal center and the manual checking of cone identification algorithm. Bland-Altman analysis was used to assess the agreement between cone density estimated within the different sampling window conditions. RESULTS: The cone density declined with decreasing sampling area and data between areas of different size showed low agreement. A high agreement was found between sampling areas of the same size when comparing density calculated with or without using individual RMFcorr. The agreement between cone density measured at radial and linear distances from the PRL and between data referred to the PRL or the foveal center was moderate. The percentage of Voronoi tiles with hexagonal packing arrangement was comparable between sampling areas of different size. The boundary effect, presence of any retinal vessels, and the manual selection of cones missed by the automated identification algorithm were identified as the factors influencing variation of cone packing arrangements in Voronoi diagrams. CONCLUSIONS: The sampling window size is the main technical factor that influences variation of cone density. Clear identification of each cone in the image and the use of a large buffer zone are necessary to minimize factors influencing variation of Voronoi

  2. Factors of Quality Improvement of the Foreign Language Teaching in Technical University

    Directory of Open Access Journals (Sweden)

    Ira R. Agasieva

    2017-03-01

    Full Text Available In the article the problem of quality of teaching and knowledge of the English language has been considered. The factors that influence the improvement of the quality of teaching and knowledge of the English language in a technical college, the use of various methods of enhancing the quality of teaching and knowledge of the English language has been analyzed. It has been distinguished the necessity of taking into account the factors such as emotional maturity of the student, the desire for success, student cognitive style, its consistency and independence.

  3. Human factors in nuclear power plants

    International Nuclear Information System (INIS)

    Bohr, E.; Hennig, J.; Preuss, W.; Thau, G.

    1977-01-01

    This report describes the results of a study on the functions of operating and maintenance personnel in nuclear power plants. Since an effective power plant design must take into systematic account the possibilities and limitations of the human element, the basic aim of the study was to identify what the human operators are required to do and how they achieve it. Information was acquired by direct observation and by interviews as well as by evaluation of written documents (e.g. incident reports, procedures manuals, work regulations) and of working conditions (e.g. equipment and workplace design). A literature search and evaluation carried out within the scope of this study has been published as a separate document. The main part of the report is devoted to discussions and conclusions on selected areas of potential improvements. The topics include control room design, factors of the physical environment including radiation, problems of maintainability, design of written documents, problems in communicating information, design and control of tasks, placement and training. A separate section deals with problems of recording human errors. (orig.) [de

  4. Ergonomics in nuclear and human factors engineering

    International Nuclear Information System (INIS)

    Muench, E.; Schultheiss, G.F.

    1988-01-01

    The work situation including man-machine-relationships in nuclear power plants is described. The overview gives only a compact summary of some important ergonomic parameters, i.e. human body dimension, human load, human characteristics and human knowledge. (DG)

  5. Human factors quantification via boundary identification of flight performance margin

    Directory of Open Access Journals (Sweden)

    Yang Changpeng

    2014-08-01

    Full Text Available A systematic methodology including a computational pilot model and a pattern recognition method is presented to identify the boundary of the flight performance margin for quantifying the human factors. The pilot model is proposed to correlate a set of quantitative human factors which represent the attributes and characteristics of a group of pilots. Three information processing components which are influenced by human factors are modeled: information perception, decision making, and action execution. By treating the human factors as stochastic variables that follow appropriate probability density functions, the effects of human factors on flight performance can be investigated through Monte Carlo (MC simulation. Kernel density estimation algorithm is selected to find and rank the influential human factors. Subsequently, human factors are quantified through identifying the boundary of the flight performance margin by the k-nearest neighbor (k-NN classifier. Simulation-based analysis shows that flight performance can be dramatically improved with the quantitative human factors.

  6. Europe Chapter of the Human Factors and Ergonomics Society Meeting

    National Research Council Canada - National Science Library

    de

    2002-01-01

    The Final Proceedings for Europe Chapter of the Human Factors and Ergonomics Society Meeting, 7 November 2001 - 9 November 2001 This is an interdisciplinary conference in human factors and ergonomics...

  7. [Analysis of work-related fatigue characteristics and its influencing factors in scientific and technical personnel].

    Science.gov (United States)

    Yang, Ting; Zhou, Dinglun; Song, Mingying; Lan, Yajia

    2015-02-01

    To investigate the current status and characteristics of work-related fatigue among scientific and technical personnel and its associated factors, and to provide a scientific basis for further interventions. A cross-sectional survey was conducted in the staff from a single scientific institution, using a self-administered questionnaire. Basic information of participants, Fatigue Scale-14, and Job Content Questionnaire were collected. The prevalence of work-related fatigue among the scientific and technical personnel was 54.6%; work-related fatigue was positively correlated with occupational stress (rs = 0.384, P work-related fatigue included occupational stress profiles, social support, and educational status. A higher risk of work-related fatigue was found in the staff under high stress, compared with those under low stress (OR = 8.5, 95%CI = 3.9∼18.7). Social support served as a protective factor for work-related fatigue, while a higher level of education was correlated with more severe work-related fatigue. Work-related fatigue is common and serious among scientific and technical personnel, especially in those under high stress. Effective interventions according to occupational stress are of great importance to reduce work-related fatigue.

  8. Study on the Technical Efficiency of Creative Human Capital in China by Three-Stage Data Envelopment Analysis Model

    Directory of Open Access Journals (Sweden)

    Jian Ma

    2014-01-01

    Full Text Available Previous researches have proved the positive effect of creative human capital and its development on the development of economy. Yet, the technical efficiency of creative human capital and its effects are still under research. The authors are trying to estimate the technical efficiency value in Chinese context, which is adjusted by the environmental variables and statistical noises, by establishing a three-stage data envelopment analysis model, using data from 2003 to 2010. The research results indicate that, in this period, the entirety of creative human capital in China and the technical efficiency value in different regions and different provinces is still in the low level and could be promoted. Otherwise, technical non-efficiency is mostly derived from the scale nonefficiency and rarely affected by pure technical efficiency. The research also examines environmental variables’ marked effects on the technical efficiency, and it shows that different environmental variables differ in the aspect of their own effects. The expansion of the scale of education, development of healthy environment, growth of GDP, development of skill training, and population migration could reduce the input of creative human capital and promote the technical efficiency, while development of trade and institutional change, on the contrary, would block the input of creative human capital and the promotion the technical efficiency.

  9. Development of a Field Management Standard for Improving Human Factors

    International Nuclear Information System (INIS)

    Yun, Young Su; Son, Il Moon; Son, Byung Chang; Kwak, Hyo Yean

    2009-07-01

    This project is to develop a management guideline for improving human performances as a part of the Human Factors Management System of Kori unit 1 which is managing all of human factors items such as man-machine system interfaces, work procedures, work environments, and human reliabilities in nuclear power plants. Human factors engineering includes an human factors suitability analysis and improvement of human works, an analysis of accidents by human error, an improvement of work environment, an establishment of human factors management rules and a development of human resources to manage and perform those things consistently. For assisting these human factors engineering tasks, we developed human factors management guidelines, checklists and work procedures to be used in staffing, qualification, training, and human information requirements and workload. We also provided a software tool for managing the above items. Additionally, contents and an item pool for a human factors qualifying examination and training programs were developed. A procedures improvement and a human factors V and V on the Kori unit 1 have been completed as a part of this project, too

  10. Humanism Factors and Islam Viewpoint from Motahri's Point of View

    Science.gov (United States)

    Yousefi, Zargham; Yousefy, Alireza; Keshtiaray, Narges

    2015-01-01

    The aim of this research is to criticize liberal humanism based on Islam viewpoint emphasizing Motahri's point of view. In this paper, the researchers tried to identify liberalism humanism factors with analytical look in order to present a new categorization called "main factor of liberal humanism". Then, each factor was studied and…

  11. Ranking of biomass pellets by integration of economic, environmental and technical factors

    International Nuclear Information System (INIS)

    Sultana, Arifa; Kumar, Amit

    2012-01-01

    Interest in biomass as a renewable energy source has increased recently in response to a need to reduce greenhouse gas (GHG) emissions. The objective of this study is to develop a multi-criteria assessment model and rank different biomass feedstock-based pellets, in terms of their suitability for use in large heat and power generation plants and show the importance of environmental, economical and technical factors in making decision about different pellets. Five pellet alternatives, each produced from a different sustainable biomass feedstock i.e., wood, straw, switchgrass, alfalfa and poultry litter, are ranked according to eleven criteria, using the Preference Ranking Organization Method for Enrichment and Evaluation (PROMETHEE). Both quantitative and qualitative criteria are considered, including environmental, technical and economic factors. Three scenarios, namely base case, environmental and economic, are developed by changing the weight assigned to different criteria. In the base case scenario, equal weights are assigned to each criterion. In the economic and environmental scenarios, more weight is given to the economic and environmental factors, respectively. Based on the PROMETHEE rankings, wood pellets are the best source of energy for all scenarios followed by switchgrass, straw, poultry litter and alfalfa pellets except economic scenario, where straw pellets held higher position than switchgrass pellets. Sensitivity analysis on weights, threshold values, preference function and production cost indicate that the ranking was stable. The ranking in all scenarios remained same when qualitative criteria were omitted from the model; this indicates the stronger influence of quantitative criteria. -- Highlights: ► This study ranks the pellets produced from different biomass feedstocks. ► The ranking of the pellets is based on technical, economical and environmental factors. ► This study uses PROMETHEE method for ranking pellets based on a range of

  12. Main clinical, therapeutic and technical factors related to patient's maximum skin dose in interventional cardiology procedures

    Science.gov (United States)

    Journy, N; Sinno-Tellier, S; Maccia, C; Le Tertre, A; Pirard, P; Pagès, P; Eilstein, D; Donadieu, J; Bar, O

    2012-01-01

    Objective The study aimed to characterise the factors related to the X-ray dose delivered to the patient's skin during interventional cardiology procedures. Methods We studied 177 coronary angiographies (CAs) and/or percutaneous transluminal coronary angioplasties (PTCAs) carried out in a French clinic on the same radiography table. The clinical and therapeutic characteristics, and the technical parameters of the procedures, were collected. The dose area product (DAP) and the maximum skin dose (MSD) were measured by an ionisation chamber (Diamentor; Philips, Amsterdam, The Netherlands) and radiosensitive film (Gafchromic; International Specialty Products Advanced Materials Group, Wayne, NJ). Multivariate analyses were used to assess the effects of the factors of interest on dose. Results The mean MSD and DAP were respectively 389 mGy and 65 Gy cm−2 for CAs, and 916 mGy and 69 Gy cm−2 for PTCAs. For 8% of the procedures, the MSD exceeded 2 Gy. Although a linear relationship between the MSD and the DAP was observed for CAs (r=0.93), a simple extrapolation of such a model to PTCAs would lead to an inadequate assessment of the risk, especially for the highest dose values. For PTCAs, the body mass index, the therapeutic complexity, the fluoroscopy time and the number of cine frames were independent explanatory factors of the MSD, whoever the practitioner was. Moreover, the effect of technical factors such as collimation, cinematography settings and X-ray tube orientations on the DAP was shown. Conclusion Optimising the technical options for interventional procedures and training staff on radiation protection might notably reduce the dose and ultimately avoid patient skin lesions. PMID:22457404

  13. Organizational crisis management: the human factor.

    Science.gov (United States)

    Lewis, Gerald

    2005-01-01

    While many professionals are quite competent when dealing with operational aspects of organizational continuity, often the "human factor" does not receive adequate attention. This article provides a brief overview of a soon to be published book by the same title. It provides a comprehensive understanding of the ubiquitous yet complex reactions of the workforce to a wide array of organizational disruptions. It goes beyond the short term intervention of debriefings to describe the more extensive pre and post incident strategies required to mitigate the impact of crises on the workforce. It is important to remember: "An organization can get its phone lines back up and have its computers backed up...but its workers may still be messed up."

  14. Human factors and ergonomics for primary care.

    Science.gov (United States)

    Bowie, Paul; Jeffcott, Shelly

    2016-03-01

    In the second paper of this series, we provide a brief overview of the scientific discipline of human factors and ergonomics (HFE). Traditionally the HFE focus in healthcare has been in acute hospital settings which are perceived to exhibit characteristics more similar to other high-risk industries already applying related principles and methods. This paper argues that primary care is an area which could benefit extensively from an HFE approach, specifically in improving the performance and well-being of people and organisations. To this end, we define the purpose of HFE, outline its three specialist sub-domains (physical, cognitive and organisational HFE) and provide examples of guiding HFE principles and practices. Additionally, we describe HFE issues of significance to primary care education, improvement and research and outline early plans for building capacity and capability in this setting.

  15. The human factor in maintenance work

    International Nuclear Information System (INIS)

    Hansson, B.

    1996-01-01

    In most of the maintenance works performed at operating plants, the personnel is the warranty for both efficient performance and good quality. To reach the right quality level in performance, the personnel needs adequate tools and of course a maintenance strategy and an organisation that supports the efficient work. The human factor is mostly referred to when something went wrong and analyses are done. There is a great potential of doing preventive analysis. The presentation will focus on experience in this field and what has been done at Barsebaeck NPP to analyse and improve the maintenance work. As maintenance work can't be seen as an isolated area, the rest of the plant organisation is included in the presentation. (author) figs., tabs

  16. Dosimetry of hands and human factor

    International Nuclear Information System (INIS)

    Harr, R.

    2008-12-01

    The human factor in facilities where open radioactive sources are managed it can be controlled through the use of the ring dosimetry, however, that these devices only provide qualitative information that is not extrapolated to legislative limits. lt is present the case analysis of hands dosimetry of female person with responsibility for professional standards and a very high profile with ratings that allow her to have a high level of knowledge of the basic standards, and because with an attitude and a culture rooted of radiation protection, among other qualities. Their records reveal a trend in which monthly doses are below the 7 mSv, and only occasionally are between 7 and 12 mSv per month and hand. The other case correspond to a technician, trained in radiological techniques, also with a high profile, with two courses for occupationally exposed personnel more than 10 annual retraining, and work experience of over 10 years as occupationally exposed personnel, in which knowledge of standards and because of the entrenched culture of radiation protection and their interest degree in the care of their exposure is still in a phase half, in this case also shows a trend in the monthly dose where found registers between 7 and 11 mSv per month and hand. The third case is of a second technician with less experience and most basic knowledge, his dose register not show a real trend, sometimes be found reads of irregular values as if the dosimeter is not used and some other times as if misused by exposing to purpose (was observed at least one reading above the monthly 30 mSv). By way of conclusion, it is noted that the hands dosimetry is a useful tool to monitor transactions through the data compilation susceptible to analysis with variations which can be placed in the context of the human factor. (Author)

  17. Effects of Demographic Characteristics, Educational Background, and Supporting Factors on ICT Readiness of Technical and Vocational Teachers in Malaysia

    Science.gov (United States)

    Alazzam, Abu-Obaideh; Bakar, Ab Rahim; Hamzah, Ramlah; Asimiran, S.

    2012-01-01

    The aim of this study was to examine ICT readiness and the effects of demographic characteristics, educational background, and support factors on the ICT readiness of technical and vocational teachers in Malaysia. The questionnaire was administered to 329 technical and vocational teachers who are teaching engineering subjects in Malaysian…

  18. Engineering Technical Review Planning Briefing

    Science.gov (United States)

    Gardner, Terrie

    2012-01-01

    The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

  19. A human transcription factor in search mode.

    Science.gov (United States)

    Hauser, Kevin; Essuman, Bernard; He, Yiqing; Coutsias, Evangelos; Garcia-Diaz, Miguel; Simmerling, Carlos

    2016-01-08

    Transcription factors (TF) can change shape to bind and recognize DNA, shifting the energy landscape from a weak binding, rapid search mode to a higher affinity recognition mode. However, the mechanism(s) driving this conformational change remains unresolved and in most cases high-resolution structures of the non-specific complexes are unavailable. Here, we investigate the conformational switch of the human mitochondrial transcription termination factor MTERF1, which has a modular, superhelical topology complementary to DNA. Our goal was to characterize the details of the non-specific search mode to complement the crystal structure of the specific binding complex, providing a basis for understanding the recognition mechanism. In the specific complex, MTERF1 binds a significantly distorted and unwound DNA structure, exhibiting a protein conformation incompatible with binding to B-form DNA. In contrast, our simulations of apo MTERF1 revealed significant flexibility, sampling structures with superhelical pitch and radius complementary to the major groove of B-DNA. Docking these structures to B-DNA followed by unrestrained MD simulations led to a stable complex in which MTERF1 was observed to undergo spontaneous diffusion on the DNA. Overall, the data support an MTERF1-DNA binding and recognition mechanism driven by intrinsic dynamics of the MTERF1 superhelical topology. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

  20. Human factors paradigm and customer care perceptions.

    Science.gov (United States)

    Clarke, Colin; Eales-Reynolds, Lesley-Jane

    2015-01-01

    The purpose of this paper is to examine if customer care (CC) can be directly linked to patient safety through a human factors (HF) framework. Data from an online questionnaire, completed by a convenience healthcare worker sample (n=373), was interrogated using thematic analysis within Vincent et al.'s (1998) HF theoretical framework. This proposes seven areas affecting patient safety: institutional context, organisation and management, work environment, team factors, individual, task and patient. Analysis identified responses addressing all framework areas. Responses (597) principally focused on work environment 40.7 per cent (n=243), organisation and management 28.8 per cent (n=172). Nevertheless, reference to other framework areas were clearly visible within the data: teams 10.2 per cent (n=61), individual 6.7 per cent (n=40), patients 6.0 per cent (n=36), tasks 4.2 per cent (n=24) and institution 3.5 per cent (n=21). Findings demonstrate congruence between CC perceptions and patient safety within a HF framework. The questionnaire requested participants to identify barriers to rather than CC enablers. Although this was at a single site complex organisation, it was similar to those throughout the NHS and other international health systems. CC can be viewed as consonant with patient safety rather than the potentially dangerous consumerisation stance, which could ultimately compromise patient safety. This work provides an original perspective on the link between CC and patient safety and has the potential to re-focus healthcare perceptions.

  1. Simulator training and human factor reliability in Kozloduy NPP, Bulgaria

    International Nuclear Information System (INIS)

    Stoychev, Kosta

    2007-01-01

    This is a PowerPoint presentation. Situated in North Bulgaria, in the vicinity of the town of Kozloduy, near the Danube River bank, there is the Bulgarian Kozloduy Nuclear Power plant operating four WWER-440 and two WWER-1000 units. Units 1 and 2 were commissioned in July, 1974 and November, 1975, respectively. These were shut down at the end of 2003. Units 3 and 4 were commissioned in December, 1980 and May, 1982. They were shut down at the end of 2006 as a precondition for Bulgaria's accession to the European Union. The 1000 MW units 5 and 6 of Kozloduy NPP were commissioned in September, 1988 and December, 1993, respectively. Large-scale modernization have been implemented and now the units meet all international safety standards. The paper describes the multifunctional simulator Kozloduy NPP for the operational staff training. The training stages are as follows: - Preparatory; -Theoretical studies; - Training at the Training Centre by means of technical devices; - Preparation and sitting for an exam before a Kozloduy NPP expert commission; - Simulator training ; - Preparation to obtain a permit for a license, corresponding to the position to begin work at the NPP; - Exams before the Nuclear Regulatory Agency (NRA) and licensing; - Shadow training at the working place; - Permission for unaided operation. The following positions are addressed by the simulator training: - Chief Plant Supervisor; - Shift Unit Supervisor; - Senior Reactor Operator; - Simulator Instructor; - Controller physicist; -Senior Turbine Operator; - Senior Operator of Turbine Feedwater Pumps of Kozloduy NPP. Improving of training method led to a reduction of number of significant events while worldwide practice proves that improvement of engineering resulted in an increase in the percentage of events, related to human factor. Analysis of human reliability in 2005 and 2006 in cooperation with representatives from Great Britain and the Technical University in Sofia were worked on the DTI NSP B

  2. DEVELOPMENT OF HUMAN FACTORS ENGINEERING GUIDANCE FOR SAFETY EVALUATIONS OF ADVANCED REACTORS

    International Nuclear Information System (INIS)

    O'HARA, J.; PERSENSKY, J.; SZABO, A.

    2006-01-01

    Advanced reactors are expected to be based on a concept of operations that is different from what is currently used in today's reactors. Therefore, regulatory staff may need new tools, developed from the best available technical bases, to support licensing evaluations. The areas in which new review guidance may be needed and the efforts underway to address the needs will be discussed. Our preliminary results focus on some of the technical issues to be addressed in three areas for which new guidance may be developed: automation and control, operations under degraded conditions, and new human factors engineering methods and tools

  3. Human factors in the Canadian nuclear industry: future needs

    International Nuclear Information System (INIS)

    Harrison, F.

    2008-01-01

    Currently the industry is facing refurbishment and new builds. At present most licensees in Canada do not have sufficient numbers of Human Factors staff. As a result, the activities of the CNSC are too often focused on providing guidance regarding the application of Human Factors, in addition to reviewing work submitted by the licensee. Greater efficiencies for both the licensee and the CNSC could be realized if licensee staff had greater Human Factors expertise. Strategies for developing Human Factors expertise should be explored through cooperative partnerships with universities, which could be encouraged to include Human Factors courses specific to nuclear. (author)

  4. A review of the models for evaluating organizational factors in human reliability analysis

    International Nuclear Information System (INIS)

    Alvarenga, Marco Antonio Bayout; Fonseca, Renato Alves da; Melo, Paulo Fernando Ferreira Frutuoso e

    2009-01-01

    Human factors should be evaluated in three hierarchical levels. The first level should concern the cognitive behavior of human beings during the control of processes that occur through the man-machine interface. Here, one evaluates human errors through human reliability models of first and second generation, like THERP, ASEP and HCR (first generation) and ATHEANA and CREAM (second generation). In the second level, the focus is in the cognitive behavior of human beings when they work in groups, as in nuclear power plants. The focus here is in the anthropological aspects that govern the interaction among human beings. In the third level, one is interested in the influence that the organizational culture exerts on human beings as well as on the tasks being performed. Here, one adds to the factors of the second level the economical and political aspects that shape the company organizational culture. Nowadays, the methodologies of HRA incorporate organizational factors in the group and organization levels through performance shaping factors. This work makes a critical evaluation of the deficiencies concerning human factors and evaluates the potential of quantitative techniques that have been proposed in the last decade to model organizational factors, including the interaction among groups, with the intention of eliminating this chronic deficiency of HRA models. Two important techniques will be discussed in this context: STAMP, based on system theory and FRAM, which aims at modeling the nonlinearities of socio-technical systems. (author)

  5. A review of the models for evaluating organizational factors in human reliability analysis

    Energy Technology Data Exchange (ETDEWEB)

    Alvarenga, Marco Antonio Bayout; Fonseca, Renato Alves da [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)], e-mail: bayout@cnen.gov.br, e-mail: rfonseca@cnen.gov.br; Melo, Paulo Fernando Ferreira Frutuoso e [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear], e-mail: frutuoso@con.ufrj.br

    2009-07-01

    Human factors should be evaluated in three hierarchical levels. The first level should concern the cognitive behavior of human beings during the control of processes that occur through the man-machine interface. Here, one evaluates human errors through human reliability models of first and second generation, like THERP, ASEP and HCR (first generation) and ATHEANA and CREAM (second generation). In the second level, the focus is in the cognitive behavior of human beings when they work in groups, as in nuclear power plants. The focus here is in the anthropological aspects that govern the interaction among human beings. In the third level, one is interested in the influence that the organizational culture exerts on human beings as well as on the tasks being performed. Here, one adds to the factors of the second level the economical and political aspects that shape the company organizational culture. Nowadays, the methodologies of HRA incorporate organizational factors in the group and organization levels through performance shaping factors. This work makes a critical evaluation of the deficiencies concerning human factors and evaluates the potential of quantitative techniques that have been proposed in the last decade to model organizational factors, including the interaction among groups, with the intention of eliminating this chronic deficiency of HRA models. Two important techniques will be discussed in this context: STAMP, based on system theory and FRAM, which aims at modeling the nonlinearities of socio-technical systems. (author)

  6. A review on environmental factors regulating arsenic methylation in humans

    International Nuclear Information System (INIS)

    Tseng, C.-H.

    2009-01-01

    Subjects exposed to arsenic show significant inter-individual variation in urinary patterns of arsenic metabolites but insignificant day-to-day intra-individual variation. The inter-individual variation in arsenic methylation can be partly responsible for the variation in susceptibility to arsenic toxicity. Wide inter-ethnic variation and family correlation in urinary arsenic profile suggest a genetic effect on arsenic metabolism. In this paper the environmental factors affecting arsenic metabolism are reviewed. Methylation capacity might reduce with increasing dosage of arsenic exposure. Furthermore, women, especially at pregnancy, have better methylation capacity than their men counterparts, probably due to the effect of estrogen. Children might have better methylation capacity than adults and age shows inconsistent relevance in adults. Smoking and alcohol consumption might be associated with a poorer methylation capacity. Nutritional status is important in the methylation capacity and folate may facilitate the methylation and excretion of arsenic. Besides, general health conditions and medications might influence the arsenic methylation capacity; and technical problems can cause biased estimates. The consumption of seafood, seaweed, rice and other food with high arsenic contents and the extent of cooking and arsenic-containing water used in food preparation may also interfere with the presentation of the urinary arsenic profile. Future studies are necessary to clarify the effects of the various arsenic metabolites including the trivalent methylated forms on the development of arsenic-induced human diseases with the consideration of the effects of confounding factors and the interactions with other effect modifiers

  7. Safety review for human factors engineering and control rooms of nuclear power plants

    International Nuclear Information System (INIS)

    Yang Mengzhuo

    1998-01-01

    Safety review for human factors engineering and control rooms of nuclear power plants (NPP) is in a forward position of science and technology, which began at American TMI severe accident and had been implemented in China. The importance and the significance of the safety review are expounded, the requirements of its scope and profundity are explained in detail. In addition, the situation of the technical document system for nuclear safety regulation on human factors engineering and control rooms of NPP in China is introduced briefly, on which the safety review is based

  8. Variations of Histone Modification Patterns: Contributions of Inter-plant Variability and Technical Factors

    Directory of Open Access Journals (Sweden)

    Sylva Brabencová

    2017-12-01

    Full Text Available Inter-individual variability of conspecific plants is governed by differences in their genetically determined growth and development traits, environmental conditions, and adaptive responses under epigenetic control involving histone post-translational modifications. The apparent variability in histone modifications among plants might be increased by technical variation introduced in sample processing during epigenetic analyses. Thus, to detect true variations in epigenetic histone patterns associated with given factors, the basal variability among samples that is not associated with them must be estimated. To improve knowledge of relative contribution of biological and technical variation, mass spectrometry was used to examine histone modification patterns (acetylation and methylation among Arabidopsis thaliana plants of ecotypes Columbia 0 (Col-0 and Wassilewskija (Ws homogenized by two techniques (grinding in a cryomill or with a mortar and pestle. We found little difference in histone modification profiles between the ecotypes. However, in comparison of the biological and technical components of variability, we found consistently higher inter-individual variability in histone mark levels among Ws plants than among Col-0 plants (grown from seeds collected either from single plants or sets of plants. Thus, more replicates of Ws would be needed for rigorous analysis of epigenetic marks. Regarding technical variability, the cryomill introduced detectably more heterogeneity in the data than the mortar and pestle treatment, but mass spectrometric analyses had minor apparent effects. Our study shows that it is essential to consider inter-sample variance and estimate suitable numbers of biological replicates for statistical analysis for each studied organism when investigating changes in epigenetic histone profiles.

  9. Variations of Histone Modification Patterns: Contributions of Inter-plant Variability and Technical Factors.

    Science.gov (United States)

    Brabencová, Sylva; Ihnatová, Ivana; Potěšil, David; Fojtová, Miloslava; Fajkus, Jiří; Zdráhal, Zbyněk; Lochmanová, Gabriela

    2017-01-01

    Inter-individual variability of conspecific plants is governed by differences in their genetically determined growth and development traits, environmental conditions, and adaptive responses under epigenetic control involving histone post-translational modifications. The apparent variability in histone modifications among plants might be increased by technical variation introduced in sample processing during epigenetic analyses. Thus, to detect true variations in epigenetic histone patterns associated with given factors, the basal variability among samples that is not associated with them must be estimated. To improve knowledge of relative contribution of biological and technical variation, mass spectrometry was used to examine histone modification patterns (acetylation and methylation) among Arabidopsis thaliana plants of ecotypes Columbia 0 (Col-0) and Wassilewskija (Ws) homogenized by two techniques (grinding in a cryomill or with a mortar and pestle). We found little difference in histone modification profiles between the ecotypes. However, in comparison of the biological and technical components of variability, we found consistently higher inter-individual variability in histone mark levels among Ws plants than among Col-0 plants (grown from seeds collected either from single plants or sets of plants). Thus, more replicates of Ws would be needed for rigorous analysis of epigenetic marks. Regarding technical variability, the cryomill introduced detectably more heterogeneity in the data than the mortar and pestle treatment, but mass spectrometric analyses had minor apparent effects. Our study shows that it is essential to consider inter-sample variance and estimate suitable numbers of biological replicates for statistical analysis for each studied organism when investigating changes in epigenetic histone profiles.

  10. Are "Human Factors" the Primary Cause of Complications in the Field of Implant Dentistry?

    Science.gov (United States)

    Renouard, Franck; Amalberti, René; Renouard, Erell

    Complications in medicine and dentistry are usually analyzed from a purely technical point of view. Rarely is the role of human behavior or judgment considered as a reason for adverse outcomes. When the role of human factors is considered, these are usually described in general terms rather than specifically identifying the factors responsible for an adverse event. The impact of cognitive and behavioral factors in the explanation of adverse events has been studied in other high-stakes areas such as aviation and nuclear power. Specific protocols have been developed to reduce rates of human error, and, where human error is unavoidable, to lessen its impact. This approach has dramatically reduced the incidence of accidents in these fields. This article aims to review how a similar approach may prove valuable in the reduction of complications in implant dentistry.

  11. Information Presentation: Human Research Program - Space Human Factors and Habitability, Space Human Factors Engineering Project

    Science.gov (United States)

    Holden, Kristina L.; Sandor, Aniko; Thompson, Shelby G.; Kaiser, Mary K.; McCann, Robert S.; Begault, D. R.; Adelstein, B. D.; Beutter, B. R.; Wenzel, E. M.; Godfroy, M.; hide

    2010-01-01

    The goal of the Information Presentation Directed Research Project (DRP) is to address design questions related to the presentation of information to the crew. The major areas of work, or subtasks, within this DRP are: 1) Displays, 2) Controls, 3) Electronic Procedures and Fault Management, and 4) Human Performance Modeling. This DRP is a collaborative effort between researchers atJohnson Space Center and Ames Research Center. T

  12. The science of human factors: separating fact from fiction.

    Science.gov (United States)

    Russ, Alissa L; Fairbanks, Rollin J; Karsh, Ben-Tzion; Militello, Laura G; Saleem, Jason J; Wears, Robert L

    2013-10-01

    Interest in human factors has increased across healthcare communities and institutions as the value of human centred design in healthcare becomes increasingly clear. However, as human factors is becoming more prominent, there is growing evidence of confusion about human factors science, both anecdotally and in scientific literature. Some of the misconceptions about human factors may inadvertently create missed opportunities for healthcare improvement. The objective of this article is to describe the scientific discipline of human factors and provide common ground for partnerships between healthcare and human factors communities. The primary goal of human factors science is to promote efficiency, safety and effectiveness by improving the design of technologies, processes and work systems. As described in this article, human factors also provides insight on when training is likely (or unlikely) to be effective for improving patient safety. Finally, we outline human factors specialty areas that may be particularly relevant for improving healthcare delivery and provide examples to demonstrate their value. The human factors concepts presented in this article may foster interdisciplinary collaborations to yield new, sustainable solutions for healthcare quality and patient safety.

  13. Frontex Working Arrangements: Legitimacy and Human Rights Concerns Regarding ‘Technical Relationships’

    Directory of Open Access Journals (Sweden)

    Melanie Fink

    2012-06-01

    Full Text Available Practices of extraterritorialisation have become cornerstones of the European Union member states' border control. Most of them are highly dependent on the willingness of third countries to cooperate. An increasingly important phenomenon is that cooperation is secured through relationships established by administrative authorities. This article deals with the challenges arising from the active engagement of Frontex in setting up cooperation structures.It is argued that the so-called working arrangements concluded between Frontex and the respective authorities of third countries, in their current form, show considerable deficiencies from the perspectives of the rule of law, democracy and human rights protection. They are not open to judicial review, the Parliament is not involved in their conclusion and they are not disclosed to the public. Furthermore, the human rights record of cooperating authorities is not considered. Concerns in this respect are frequently attempted to be dispelled by recourse to the 'technical' as opposed to 'political' nature of working arrangements. Likewise, it is assumed that merely 'technical relationships' cannot affect individuals. These arguments are not convincing. Quite the contrary, the political implications of working arrangements and their operation in a highly human rights sensitive field demand conformity with the fundamental values the European Union is based on.

  14. Human factors in surgery: from Three Mile Island to the operating room.

    Science.gov (United States)

    D'Addessi, Alessandro; Bongiovanni, Luca; Volpe, Andrea; Pinto, Francesco; Bassi, PierFrancesco

    2009-01-01

    Human factors is a definition that includes the science of understanding the properties of human capability, the application of this understanding to the design and development of systems and services, the art of ensuring their successful applications to a program. The field of human factors traces its origins to the Second World War, but Three Mile Island has been the best example of how groups of people react and make decisions under stress: this nuclear accident was exacerbated by wrong decisions made because the operators were overwhelmed with irrelevant, misleading or incorrect information. Errors and their nature are the same in all human activities. The predisposition for error is so intrinsic to human nature that scientifically it is best considered as inherently biologic. The causes of error in medical care may not be easily generalized. Surgery differs in important ways: most errors occur in the operating room and are technical in nature. Commonly, surgical error has been thought of as the consequence of lack of skill or ability, and is the result of thoughtless actions. Moreover the 'operating theatre' has a unique set of team dynamics: professionals from multiple disciplines are required to work in a closely coordinated fashion. This complex environment provides multiple opportunities for unclear communication, clashing motivations, errors arising not from technical incompetence but from poor interpersonal skills. Surgeons have to work closely with human factors specialists in future studies. By improving processes already in place in many operating rooms, safety will be enhanced and quality increased.

  15. Applying Human-performance Models to Designing and Evaluating Nuclear Power Plants: Review Guidance and Technical Basis

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J.M.

    2009-11-30

    Human performance models (HPMs) are simulations of human behavior with which we can predict human performance. Designers use them to support their human factors engineering (HFE) programs for a wide range of complex systems, including commercial nuclear power plants. Applicants to U.S. Nuclear Regulatory Commission (NRC) can use HPMs for design certifications, operating licenses, and license amendments. In the context of nuclear-plant safety, it is important to assure that HPMs are verified and validated, and their usage is consistent with their intended purpose. Using HPMs improperly may generate misleading or incorrect information, entailing safety concerns. The objective of this research was to develop guidance to support the NRC staff's reviews of an applicant's use of HPMs in an HFE program. The guidance is divided into three topical areas: (1) HPM Verification, (2) HPM Validation, and (3) User Interface Verification. Following this guidance will help ensure the benefits of HPMs are achieved in a technically sound, defensible manner. During the course of developing this guidance, I identified several issues that could not be addressed; they also are discussed.

  16. Applying Human-performance Models to Designing and Evaluating Nuclear Power Plants: Review Guidance and Technical Basis

    International Nuclear Information System (INIS)

    O'Hara, J.M.

    2009-01-01

    Human performance models (HPMs) are simulations of human behavior with which we can predict human performance. Designers use them to support their human factors engineering (HFE) programs for a wide range of complex systems, including commercial nuclear power plants. Applicants to U.S. Nuclear Regulatory Commission (NRC) can use HPMs for design certifications, operating licenses, and license amendments. In the context of nuclear-plant safety, it is important to assure that HPMs are verified and validated, and their usage is consistent with their intended purpose. Using HPMs improperly may generate misleading or incorrect information, entailing safety concerns. The objective of this research was to develop guidance to support the NRC staff's reviews of an applicant's use of HPMs in an HFE program. The guidance is divided into three topical areas: (1) HPM Verification, (2) HPM Validation, and (3) User Interface Verification. Following this guidance will help ensure the benefits of HPMs are achieved in a technically sound, defensible manner. During the course of developing this guidance, I identified several issues that could not be addressed; they also are discussed.

  17. Application of objective clinical human reliability analysis (OCHRA) in assessment of technical performance in laparoscopic rectal cancer surgery.

    Science.gov (United States)

    Foster, J D; Miskovic, D; Allison, A S; Conti, J A; Ockrim, J; Cooper, E J; Hanna, G B; Francis, N K

    2016-06-01

    Laparoscopic rectal resection is technically challenging, with outcomes dependent upon technical performance. No robust objective assessment tool exists for laparoscopic rectal resection surgery. This study aimed to investigate the application of the objective clinical human reliability analysis (OCHRA) technique for assessing technical performance of laparoscopic rectal surgery and explore the validity and reliability of this technique. Laparoscopic rectal cancer resection operations were described in the format of a hierarchical task analysis. Potential technical errors were defined. The OCHRA technique was used to identify technical errors enacted in videos of twenty consecutive laparoscopic rectal cancer resection operations from a single site. The procedural task, spatial location, and circumstances of all identified errors were logged. Clinical validity was assessed through correlation with clinical outcomes; reliability was assessed by test-retest. A total of 335 execution errors identified, with a median 15 per operation. More errors were observed during pelvic tasks compared with abdominal tasks (p technical performance of laparoscopic rectal surgery.

  18. Human Factors and Robotics: Current Status and Future Prospects.

    Science.gov (United States)

    Parsons, H. McIlvaine; Kearsley, Greg P.

    The principal human factors engineering issue in robotics is the division of labor between automation (robots) and human beings. This issue reflects a prime human factors engineering consideration in systems design--what equipment should do and what operators and maintainers should do. Understanding of capabilities and limitations of robots and…

  19. Draft revision of human factors guideline HF-010

    International Nuclear Information System (INIS)

    Lee, Hyun Chul; Lee, Yong Hee; Oh, In Seok; Lee, Jung Woon; Cha, Woo Chang; Lee, Dhong Ha

    2003-05-01

    The Application of Human Factors to the design of Man-Machine Interfaces System(MMIS) in the nuclear power plant is essential to the safety and productivity of the nuclear power plants, human factors standards and guidelines as well as human factors analysis methods and experiments are weightily used to the design application. A Korean engineering company has developed a human factors engineering guideline, so-call HF-010, and has used it for human factors design, however the revision of HF-010 is necessary owing to lack of the contents related to the advanced MMI(Man-Machine Interfaces). As the results of the reviews of HF-010, it is found out that the revision of Section 9. Computer Displays of HF-010 is urgent, thus the revision was drafted on the basis of integrated human factors design guidelines for VDT, human factors design guidelines for PMAS SPADES display, human factors design guidelines for PMAS alarm display, and human factors design guidelines for electronic displays developed by the surveillance and operation support project of KOICS. The draft revision of HF-010 Section 9 proposed in this report can be utilized for the human factors design of the advanced MMI, and the high practical usability of the draft can be kept up through the continuous revision according to the advancement of digital technology

  20. CAPTCHA Based on Human Cognitive Factor

    OpenAIRE

    Chowdhury, Mohammad Jabed Morshed; Chakraborty, Narayan Ranjan

    2013-01-01

    A CAPTCHA (Completely Automated Public Turing test to tell Computers and Humans Apart) is an automatic security mechanism used to determine whether the user is a human or a malicious computer program. It is a program that generates and grades tests that are human solvable, but intends to be beyond the capabilities of current computer programs. CAPTCHA should be designed to be very easy for humans but very hard for machines. Unfortunately, the existing CAPTCHA systems while trying to maximize ...

  1. The potential impacts of grid-connected distributed generation and how to address them: A review of technical and non-technical factors

    International Nuclear Information System (INIS)

    Passey, Robert; Spooner, Ted; MacGill, Iain; Watt, Muriel; Syngellakis, Katerina

    2011-01-01

    Distributed generation is being deployed at increasing levels of penetration on electricity grids worldwide. It can have positive impacts on the network, but also negative impacts if integration is not properly managed. This is especially true of photovoltaics, in part because it's output fluctuates significantly and in part because it is being rapidly deployed in many countries. Potential positive impacts on grid operation can include reduced network flows and hence reduced losses and voltage drops. Potential negative impacts at high penetrations include voltage fluctuations, voltage rise and reverse power flow, power fluctuations, power factor changes, frequency regulation and harmonics, unintentional islanding, fault currents and grounding issues. This paper firstly reviews each of these impacts in detail, along with the current technical approaches available to address them. The second section of this paper discusses key non-technical factors, such as appropriate policies and institutional frameworks, which are essential to effectively coordinate the development and deployment of the different technical solutions most appropriate for particular jurisdictions. These frameworks will be different for different jurisdictions, and so no single approach will be appropriate worldwide. - Highlights: → Distributed generation can have both positive and negative impacts on networks. → Technical solutions to address these negative impacts are discussed. → The required appropriate policies and institutional frameworks are discussed.

  2. HUMAN POTENTIAL AS A STRATEGIC FACTOR OF REGIONAL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    A.M. Korobeynikov

    2008-12-01

    Full Text Available The article gives an insight of human potential as the strategic factor of regional development. The matter of human potential and its role in regional reproducing process is considered; regional intellectual potential as an integral part of human potential is analysed. The author outlines major directions of active social policy, aimed to develop regional human potential.

  3. State Policies on Human Capital Resource Management: Minnesota. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Bhatt, Monica; Behrstock, Ellen; Cushing, Ellen; Wraight, Sara

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  4. State Policies on Human Capital Resource Management: Wisconsin. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Cushing, Ellen; Bhatt, Monica; Wraight, Sara; Behrstock, Ellen; Meyer, Cassandra

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  5. State Policies on Human Capital Resource Management: Indiana. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Meyer, Cassandra; Bhatt, Monica; Wraight, Sara; Behrstock, Ellen; Cushing, Ellen

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  6. State Policies on Human Capital Resource Management: Iowa. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Behrstock, Ellen; Bhatt, Monica; Cushing, Ellen; Wraight, Sara

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  7. State Policies on Human Capital Resource Management: Michigan. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Meyer, Cassandra; Bhatt, Monica; Wraight, Sara; Behrstock, Ellen; Cushing, Ellen

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  8. State Policies on Human Capital Resource Management: Illinois. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Meyers, Coby; Bhatt, Monica; Wraight, Sara; Behrstock, Ellen; Cushing, Ellen

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  9. State Policies on Human Capital Resource Management: Ohio. Human Capital Resource Management Technical Brief

    Science.gov (United States)

    Bhatt, Monica; Wraight, Sara; Behrstock, Ellen; Cushing, Ellen

    2010-01-01

    Training, recruiting, developing, and supporting talented and effective educators throughout their careers is known as human capital resource management (HCRM) in education. HCRM has been identified in recent literature as one of the ways in which districts and states may increase school effectiveness and improve student learning (Heneman &…

  10. An investigation on factors influencing on human resources productivity

    Directory of Open Access Journals (Sweden)

    Masoumeh Seifi Divkolaii

    2014-05-01

    Full Text Available Human resources development is one of the most important components of any organization and detecting important factors influencing on human resources management plays essential role on the success of the firms. In this paper, we present an empirical investigation to determine different factors influencing productivity of human resources of Islamic Republic of Iran Broadcasting (IRIB in province of Mazandaran, Iran. The study uses analytical hierarchy process (AHP to rank 17 important factors and determines that personal characteristics were the most important factors followed by management related factors and environmental factors. In terms of personal characteristics, job satisfaction plays essential role on human resources development. In terms of managerial factors, paying attention on continuous job improvement by receiving appropriate training is the most important factor followed by welfare facilities for employees and using a system of reward/punishment in organization. Finally, in terms of environmental factors, occupational safety is number one priority followed by organizational rules and regulations.

  11. Investigation of evaluation methods for human factors education effectiveness

    International Nuclear Information System (INIS)

    Yoshimura, Seiichi; Fujimoto, Junzo; Sasou Kunihide; Hasegawa, Naoko

    2004-01-01

    Education effectiveness in accordance with investment is required in the steam of electric power regulation alleviation. Therefore, evaluation methods for human factors education effectiveness which can observe human factors culture pervading process were investigated through research activities on education effectiveness in universities and actual in house education in industry companies. As a result, the contents of evaluation were found to be the change of feeling for human factors and some improving proposals in work places when considering the purpose of human factors education. And, questionnaire is found to be suitable for the style of evaluation. In addition, the timing of evaluation is desirable for both just after education and after some period in work places. Hereafter, data will be collected using these two kinds of questionnaires in human factors education courses in CRIEPI and some education courses in utilities. Thus, education effectiveness evaluation method which is suitable for human factors will be established. (author)

  12. A human factors needs assessment and planning study

    International Nuclear Information System (INIS)

    Price, H.E.; Van Cott, H.P.

    1982-06-01

    A study was done to assess the need for human factors research, development, and regulatory action in the Atomic Energy Control Board. Further study or development in nine human factors areas is proposed. The urgency, schedule, and resources judged to be necessary for the proposed efforts are estimated. Special emphasis is placed on the need for task analysis information, for the evaluation of control room and maintenance human engineering, and for the development of an improved human error reporting system

  13. Discussing the Effective Factors on Maintenance of Human Resources

    OpenAIRE

    Bahare Shahriari

    2016-01-01

    In this research, the author has elaborated on detection of effective factors on maintenance and retention of human resources. Since human resources are the most resources for obtaining competitive advantage, it is essential to pay attention to different dimensions of human resources management. One of these dimensions is retention of human resources. Factors such as providing correct and valid information at the time of recruitment, assigning tasks based on competence, existence of a clear c...

  14. Development of human factors evaluation techniques for nuclear power plants

    International Nuclear Information System (INIS)

    Oh, I.S.; Lee, Y.H.; Lee, J.W.; Sim, B.S.

    1999-01-01

    This paper describes development of an operator task simulation analyzer and human factors evaluation techniques performed recently at Korea Atomic Energy Research Institute. The first is the SACOM (Simulation Analyzer with a Cognitive Operator Model) for the assessment of task performance by simulating control room operation. The latter has two objectives: to establish a human factors experiment facility, the Integrated Test Facility (ITF), and to establish techniques for human factors experiments. (author)

  15. A regulatory perspective on human factors in nuclear power

    International Nuclear Information System (INIS)

    Whitfield, D.

    1987-01-01

    This paper sets out the approaches being taken by the United Kingdom Nuclear Installations Inspectorate (NII) to monitoring the application of human factors principles and practice in the UK industry. The role of NII is outlined, the development of human factors concerns is reviewed, the assessment of the Sizewell 'B' safety case is presented as a particular example, and pertinent future developments in the human factors discipline are proposed. (author)

  16. The Effect of Non-technical Factors in B2C E-Commerce

    Science.gov (United States)

    Sanayei, Ali; Shafe'Ei, Reza

    As e-commerce grows across industries worldwide , business are building web sites for presence as well as for online business. It is more than transferring current business operations to a new medium. This situation requires explaining main models, changing infrastructures, and notice to customer needs as their vital rights. Whilst increasing numbers of firms have launched themselves on the Internet, they are trying to consideration of the strategic implications of developing, implementing or running a Web site. Global competition, laws, and customer preferences are among the issues being affected by e-commerce. In this study many factors that effect on e-commerce are considered these factors have no technical issue in nature. Companies related factors, customers' knowledge, customers' trust and customers' behavior are the main effective factors in development of B2C e-commerce. In this research we surveyed the mentioned aspects by offering questionnaire to experts of e-commerce for companies. The results show there is a meaningful relationship between perception, knowledge, trust and attitude of customers and the company's capabilities in the other side with B2C e-commerce development.

  17. EDI and the Technical Communicator.

    Science.gov (United States)

    Eiler, Mary Ann

    1994-01-01

    Assesses the role of technical communicators in electronic data interchange (EDI). Argues that, as experts in information design, human factors, instructional theory, and professional writing, technical communicators should be advocates of standard documentation protocols and should rethink the traditional concepts of "document" to…

  18. Importance of human factors on nuclear installations safety

    International Nuclear Information System (INIS)

    Caruso, G.J.

    1990-01-01

    Actually, installations safety and, in particular the nuclear installations infer a strong incidence in human factors related to the design and operation of such installations. In general, the experience aims to that the most important accidents have happened as result of the components' failures combination and human failures in the operation of safety systems. Human factors in the nuclear installations may be divided into two areas: economy and human reliability. Human factors treatments for the safety evaluation of the nuclear installations allow to diagnose the weak points of man-machine interaction. (Author) [es

  19. Human factors guidelines for large-screen displays

    International Nuclear Information System (INIS)

    Collier, Steve

    2005-09-01

    Any control-room project (including upgrades or evolutionary improvements to existing control-rooms) is well advised at the outset first to gather and update related background material for the design. This information-gathering exercise should also take into account experience from similar projects and operating experience. For these reasons, we decided to use our research, and experience in large-screen display design with several clients to update human factors guidance for large-screen displays, to take into account new ergonomics guidelines, operating experience, and work from similar projects. To write the updated guidelines, we drew on much of our experience across several departments at IFE, including research funded by the HRP programme, and experience with individual clients. Guidance here is accordingly focused mainly on recent areas of technical and human innovations in the man-machine interface. One particular area of focus was on the increasing use of large-screen display systems in modern control-rooms, and on how guidelines could be adapted and supplemented for their design. Guidance or reference to recommended sources is also given for control suite arrangement and layout, control-room layout, workstation layout, design of displays and controls, and design of the work environment, especially insofar as these ergonomic issues interact with the effectiveness of modern displays, in particular large screen displays. The work shows that there can be synergy between HRP research and bilateral activities: the one side offers a capability to develop tools and guidelines, while the other side gives an opportunity to test and refine these in practice, to the benefit of both parties. (Author)

  20. Human factors guidelines for large-screen displays

    Energy Technology Data Exchange (ETDEWEB)

    Collier, Steve

    2005-09-15

    Any control-room project (including upgrades or evolutionary improvements to existing control-rooms) is well advised at the outset first to gather and update related background material for the design. This information-gathering exercise should also take into account experience from similar projects and operating experience. For these reasons, we decided to use our research, and experience in large-screen display design with several clients to update human factors guidance for large-screen displays, to take into account new ergonomics guidelines, operating experience, and work from similar projects. To write the updated guidelines, we drew on much of our experience across several departments at IFE, including research funded by the HRP programme, and experience with individual clients. Guidance here is accordingly focused mainly on recent areas of technical and human innovations in the man-machine interface. One particular area of focus was on the increasing use of large-screen display systems in modern control-rooms, and on how guidelines could be adapted and supplemented for their design. Guidance or reference to recommended sources is also given for control suite arrangement and layout, control-room layout, workstation layout, design of displays and controls, and design of the work environment, especially insofar as these ergonomic issues interact with the effectiveness of modern displays, in particular large screen displays. The work shows that there can be synergy between HRP research and bilateral activities: the one side offers a capability to develop tools and guidelines, while the other side gives an opportunity to test and refine these in practice, to the benefit of both parties. (Author)

  1. The contributions of human factors on human error in Malaysia aviation maintenance industries

    Science.gov (United States)

    Padil, H.; Said, M. N.; Azizan, A.

    2018-05-01

    Aviation maintenance is a multitasking activity in which individuals perform varied tasks under constant pressure to meet deadlines as well as challenging work conditions. These situational characteristics combined with human factors can lead to various types of human related errors. The primary objective of this research is to develop a structural relationship model that incorporates human factors, organizational factors, and their impact on human errors in aviation maintenance. Towards that end, a questionnaire was developed which was administered to Malaysian aviation maintenance professionals. Structural Equation Modelling (SEM) approach was used in this study utilizing AMOS software. Results showed that there were a significant relationship of human factors on human errors and were tested in the model. Human factors had a partial effect on organizational factors while organizational factors had a direct and positive impact on human errors. It was also revealed that organizational factors contributed to human errors when coupled with human factors construct. This study has contributed to the advancement of knowledge on human factors effecting safety and has provided guidelines for improving human factors performance relating to aviation maintenance activities and could be used as a reference for improving safety performance in the Malaysian aviation maintenance companies.

  2. Simulator training and non-technical factors improve laparoscopic performance among OBGYN trainees.

    Science.gov (United States)

    Ahlborg, Liv; Hedman, Leif; Nisell, Henry; Felländer-Tsai, Li; Enochsson, Lars

    2013-10-01

    To investigate how simulator training and non-technical factors affect laparoscopic performance among residents in obstetrics and gynecology. In this prospective study, trainees were randomized into three groups. The first group was allocated to proficiency-based training in the LapSimGyn(®) virtual reality simulator. The second group received additional structured mentorship during subsequent laparoscopies. The third group served as control group. At baseline an operation was performed and visuospatial ability, flow and self-efficacy were assessed. All groups subsequently performed three tubal occlusions. Self-efficacy and flow were assessed before and/or after each operation. Simulator training was conducted at the Center for Advanced Medical Simulation and Training, Karolinska University Hospital. Sterilizations were performed at each trainee's home clinic. Twenty-eight trainees/residents from 21 hospitals in Sweden were included. Visuospatial ability was tested by the Mental Rotation Test-A. Flow and self-efficacy were assessed by validated scales and questionnaires. Laparoscopic performance was measured as the duration of surgery. Visuospatial ability, self-efficacy and flow were correlated to the laparoscopic performance using Spearman's correlations. Differences between groups were analyzed by the Mann-Whitney U-test. No differences across groups were detected at baseline. Self-efficacy scores before and flow scores after the third operation were significantly higher in the trained groups. Duration of surgery was significantly shorter in the trained groups. Flow and self-efficacy correlate positively with laparoscopic performance. Simulator training and non-technical factors appear to improve the laparoscopic performance among trainees/residents in obstetrics and gynecology. © 2013 Nordic Federation of Societies of Obstetrics and Gynecology.

  3. A methodology to incorporate organizational factors into human reliability analysis

    International Nuclear Information System (INIS)

    Li Pengcheng; Chen Guohua; Zhang Li; Xiao Dongsheng

    2010-01-01

    A new holistic methodology for Human Reliability Analysis (HRA) is proposed to model the effects of the organizational factors on the human reliability. Firstly, a conceptual framework is built, which is used to analyze the causal relationships between the organizational factors and human reliability. Then, the inference model for Human Reliability Analysis is built by combining the conceptual framework with Bayesian networks, which is used to execute the causal inference and diagnostic inference of human reliability. Finally, a case example is presented to demonstrate the specific application of the proposed methodology. The results show that the proposed methodology of combining the conceptual model with Bayesian Networks can not only easily model the causal relationship between organizational factors and human reliability, but in a given context, people can quantitatively measure the human operational reliability, and identify the most likely root causes or the prioritization of root causes caused human error. (authors)

  4. Human factors/ergonomics as a systems discipline? "The human use of human beings" revisited

    DEFF Research Database (Denmark)

    Hollnagel, Erik

    2014-01-01

    Discussions of the possible future of Human factors/ergonomics (HFE) usually take the past for granted in the sense that the future of HFE is assumed to be more of the same. This paper argues that the nature of work in the early 2010s is so different from the nature of work when HFE was formulated...

  5. NAS Human Factors Safety Research Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory conducts an integrated program of research on the relationship of factors concerning individuals, work groups, and organizations as employees perform...

  6. An improvement of the applicability of human factors guidelines for coping with human factors issues in nuclear power plants

    International Nuclear Information System (INIS)

    Lee, Y. H.; Lee, J. Y.

    2003-01-01

    Human factors have been well known as one of the key factors to the system effectiveness as well as the efficiency and safety of nuclear power plants(NPPs). Human factors engineering(HFE) are included in periodic safety review(PSR) on the existing NPPs and the formal safety assessment for the new ones. However, HFE for NPPs is still neither popular in practice nor concrete in methodology. Especially, the human factors guidelines, which are the most frequent form of human factors engineering in practice, reveal the limitations in their applications. We discuss the limitations and their casual factors found in human factors guidelines in order to lesson the workload of HFE practitioners and to improve the applicability of human factors guidelines. According to the purposes and the phases of HFE for NPPs, more selective items and specified criteria should be prepared carefully in the human factors guidelines for the each HFE applications in practice. These finding on the human factors guidelines can be transferred to the other HFE application field, such as military, aviation, telecommunication, HCI, and product safety

  7. Research of human factor in nuclear power plants

    International Nuclear Information System (INIS)

    Nopp, I.

    1983-01-01

    The question is discussed of the study of the human factor with regard to the reliability of nuclear power plant operation. The reliability of the human factor is the result of the functional fitness, motivation, working conditions and working regime of personnel. (J.B.)

  8. Human Reliability Analysis for Design: Using Reliability Methods for Human Factors Issues

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Laurids Boring

    2010-11-01

    This paper reviews the application of human reliability analysis methods to human factors design issues. An application framework is sketched in which aspects of modeling typically found in human reliability analysis are used in a complementary fashion to the existing human factors phases of design and testing. The paper provides best achievable practices for design, testing, and modeling. Such best achievable practices may be used to evaluate and human system interface in the context of design safety certifications.

  9. Human Reliability Analysis for Design: Using Reliability Methods for Human Factors Issues

    International Nuclear Information System (INIS)

    Boring, Ronald Laurids

    2010-01-01

    This paper reviews the application of human reliability analysis methods to human factors design issues. An application framework is sketched in which aspects of modeling typically found in human reliability analysis are used in a complementary fashion to the existing human factors phases of design and testing. The paper provides best achievable practices for design, testing, and modeling. Such best achievable practices may be used to evaluate and human system interface in the context of design safety certifications.

  10. Human factors in design modifications: panel alternative stop in Almaraz

    International Nuclear Information System (INIS)

    Roman, Y.; Bote, J.

    2015-01-01

    Human Factors Engineering has acquired a crucial role in the development of any design modification (DM), where every aspect relative to any interaction with the human user has to be taken into account at any stage thereof. Considering this, during the last years, Almaraz Nuclear Powe Plants has developed a program of Human Factors Engineering in order to reach the internationally recognized standards or systematic collected on NUREG 0711 Human Factors Engineering Program Review Model (NRC). One of the most important projects of this program at Almaraz Nuclear Power Plant has been the implementation of the Alternative Stop Panel and their corresponding Transfer Panels. (Author)

  11. Human Milk Composition: Nutrients and Bioactive Factors

    Science.gov (United States)

    Ballard, Olivia; Morrow, Ardythe L.

    2013-01-01

    Synopsis The composition of human milk is the biologic norm for infant nutrition. Human milk also contains many hundreds to thousands of distinct bioactive molecules that protect against infection and inflammation and contribute to immune maturation, organ development, and healthy microbial colonization. Some of these molecules, e.g., lactoferrin, are being investigated as novel therapeutic agents. A dynamic, bioactive fluid, human milk changes in composition from colostrum to late lactation, and varies within feeds, diurnally, and between mothers. Feeding infants with expressed human milk is increasing. Pasteurized donor milk is now commonly provided to high risk infants and most mothers in the U.S. express and freeze their milk at some point in lactation for future infant feedings. Many milk proteins are degraded by heat treatment and freeze-thaw cycles may not have the same bioactivity after undergoing these treatments. This article provides an overview of the composition of human milk, sources of its variation, and its clinical relevance. PMID:23178060

  12. Accounting for human factor in QC and QA inspections

    International Nuclear Information System (INIS)

    Goodman, J.

    1986-01-01

    Two types of human error during QC/QA inspection have been identified. The method of accounting for the effects of human error in QC/QA inspections was developed. The result of evaluation of the proportion of discrepant items in the population is affected significantly by human factor

  13. The human factor: enhancing women's rights.

    Science.gov (United States)

    Steinzor, N

    1995-01-01

    The Universal Declaration of Human Rights, adopted by the UN in 1948, declares that all human beings are born free and equal in dignity and rights, and that everyone has the right to life, liberty, and security of person. In practice, however, far from everyone has these rights, especially women. Many women worldwide have neither the awareness of nor access to family planning methods with which they could regulate their fertility and childbearing. Thus deprived of their reproductive freedom, these women cannot pursue education, employment, and other life options which would otherwise be readily available to them were they not saddled with poor reproductive health and too many children. Expanded choices enhance the status of women, which in turn helps them to reduce fertility rates and stabilize population growth. The author discusses how the wide range of cultural and social norms, and economic and political systems worldwide make it very difficult and complex to actually implement universal human rights.

  14. Human factors aspects of advanced instrumentation in the nuclear industry

    International Nuclear Information System (INIS)

    Carter, R.J.

    1989-01-01

    An important consideration in regards to the use of advanced instrumentation in the nuclear industry is the interface between the instrumentation system and the human. A survey, oriented towards identifying the human factors aspects of digital instrumentation, was conducted at a number of United States (US) and Canadian nuclear vendors and utilities. Human factors issues, subsumed under the categories of computer-generated displays, controls, organizational support, training, and related topics were identified. 20 refs., 2 tabs

  15. Research on the NPP human factors engineering operating experience review

    International Nuclear Information System (INIS)

    Ren Xiangchen; Miao Hongxing; Ning Zhonghe

    2006-01-01

    This paper addresses the importance of the human factors engineering (HFE) for the design of nuclear power plant (NPP), especially for the design of human-machine interface in the NPP. It also summarizes the scope and content of the NPP HFE. The function, scope, content and process of the NPP human factors engineering operating experience review (OER) are mainly focused on, and significantly discussed. Finally, it briefly introduces the situation of the studies on the OER in China. (authors)

  16. Interchange rotation factors and player characteristics influence physical and technical performance in professional Australian Rules football.

    Science.gov (United States)

    Dillon, Patrick A; Kempton, Thomas; Ryan, Samuel; Hocking, Joel; Coutts, Aaron J

    2018-03-01

    To examine the effects of match-related and individual player characteristics on activity profile and technical performance during rotations in professional Australian football. Longitudinal observational study. Global positioning system data and player rating scores were collected from 33 professional Australian football players during 15 Australian football League matches. Player rating scores were time aligned with their relative total and high-speed running (HSR) distance (>20kmh -1 ) for each on ground rotation. Individual players' maximal aerobic running speed (MAS) was determined from a two-kilometre trial. A multilevel linear mixed model was used to examine the influence of rotations on physical activity profiles and skill execution during match play. Rotation duration and accumulated distance resulted in a trivial-to-moderate reduction in relative total and HSR distances as well as relative rating points. The number of disposals in a rotation had a small positive effect on relative total and HSR distances and a large positive effect on relative rating points. MAS was associated with a moderate-to-large increase in relative total distance, but had a large negative effect on relative rating points. Previous rotation time, stoppages and the number of rotations in the quarter had a trivial-to-small negative effect on relative total and HSR distances. A greater speed (mmin -1 ) was associated with a trivial increase in rating points during a rotation, while there was a trivial decrease in relative total distance as rating points increased. The complex relationship between factors that influence activity profile and technical performance during rotations in Australian football needs to be considered when interpreting match performance. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

  17. Technical, institutional and economic factors important for developing a multinational radioactive waste repository

    International Nuclear Information System (INIS)

    1998-06-01

    Countries planning and implementing nuclear energy programmes should assume responsibility for the safe management and final disposal of radioactive waste from their programmes. However, there are countries whose radioactive waste volumes do not easily justify a national repository, and/or countries which do not have the resources or favorable natural conditions for waste disposal to dedicate to a national repository project. These countries would benefit from multinational co-operation for the disposal. Interest in the concept of a multinational repository for radioactive waste has been expressed by several Member States and the waste management community in the light of the potential benefit to the partner countries from the safety, technical and economic standpoints. However, such an approach involves many political and public acceptance issues and therefore a consensus among countries or regions concerned is a prerequisite. In this context, it was deemed appropriate that the IAEA access the technical, institutional, ethical and economic factors to be taken into account in the process of such consensus building. This report is intended to provide an assessment which can serve as a general basis for establishing a waste management policy and/or further assessing specific issues such as ownership and liability, institutional aspects and problems related to long term commitments. This report is divided into five sections where the first section gives background, objectives, scope and structure of the report. Section 2 discusses multinational repository concept in terms of needs and the role of a multinational repository, interaction between host and partner countries and formulation of a multinational repository. Section 3 identifies basic issues to be considered for establishing a multinational repository, and some specific issues relating to specific waste categories. Section 4 analyses potential benefits and challenges to be addresses in establishing a

  18. Non-technical success factors for bioenergy projects—Learning from a multiple case study in Japan

    International Nuclear Information System (INIS)

    Blumer, Yann B.; Stauffacher, Michael; Lang, Daniel J.; Hayashi, Kiyotada; Uchida, Susumu

    2013-01-01

    There is wide agreement in the literature that non-technical factors play a decisive role in the successful implementation of bioenergy projects. One underlying reason is that such projects require the involvement of many stakeholders, such as feedstock producers, engineers, authorities and the concerned public. We analyze the role of bioenergy-specific non-technical factors for the success of bioenergy projects. In a broad literature review we first identify potential success factors belonging to the five dimensions project characteristics, policy framework, regional integration, public perception and stakeholders. Using these factors as conceptual framework, we next analyze six Japanese pilot projects for bioenergy utilization supported by Japans Agriculture, Forestry and Fisheries Research Council. We apply Rough Set Analysis, a data mining method that can be used for small sample sizes to identify patterns in a dataset. We find that, by and large, non-technical factors from all five dimensions – such as the stability of the local policy framework – co-occur with project success. Furthermore, we show that there are diverging interpretations as to what success in a bioenergy project means. This requires tradeoffs between various goals, which should be identified and addressed explicitly at early stages of such a project. - Highlights: • We collect a broad list of non-technical success factors for bioenergy projects. • These are applied to six pilot projects in Japan and shown to be relevant. • We acknowledge different aspects of project success and their potential conflicts

  19. Development of Human Factor Management Requirements and Human Error Classification for the Prevention of Railway Accident

    International Nuclear Information System (INIS)

    Kwak, Sang Log; Park, Chan Woo; Shin, Seung Ryoung

    2008-08-01

    Railway accident analysis results show that accidents cased by human factors are not decreasing, whereas H/W related accidents are steadily decreasing. For the efficient management of human factors, many expertise on design, conditions, safety culture and staffing are required. But current safety management activities on safety critical works are focused on training, due to the limited resource and information. In order to improve railway safety, human factors management requirements for safety critical worker and human error classification is proposed in this report. For this accident analysis, status of safety measure on human factor, safety management system on safety critical worker, current safety planning is analysis

  20. Seroprevalence and Risk Factors for Human Immunodeficiency ...

    African Journals Online (AJOL)

    This study sought to determine the seroprevalence of human immunodeficiency virus (HIV), hepatitis C virus (HCV), and hepatitis B surface antigen (HBsAg) among blood donors at Bolga-tanga Regional Hospital, Ghana by blood group type, sex and age and also determining the asso-ciation, if any, in the occurrence of the ...

  1. Human factors analysis of U.S. Navy afloat mishaps

    OpenAIRE

    Lacy, Rex D.

    1998-01-01

    The effects of maritime mishaps, which include loss of life as well as environmental and economic considerations, are significant. It has been estimated that over 80percent of maritime accidents areat least partially attributable to human error. Human error has been extensively studied in a number of fields, particularly aviation. The present research involves application of the Human Factors Accident Classification System (HFACS), developed by the Naval Safety Center, to human error causal f...

  2. Human-automation collaboration in manufacturing: identifying key implementation factors

    OpenAIRE

    Charalambous, George; Fletcher, Sarah; Webb, Philip

    2013-01-01

    Human-automation collaboration refers to the concept of human operators and intelligent automation working together interactively within the same workspace without conventional physical separation. This concept has commanded significant attention in manufacturing because of the potential applications, such as the installation of large sub-assemblies. However, the key human factors relevant to human-automation collaboration have not yet been fully investigated. To maximise effective implement...

  3. Usability: Human Research Program - Space Human Factors and Habitability

    Science.gov (United States)

    Sandor, Aniko; Holden, Kritina L.

    2009-01-01

    The Usability project addresses the need for research in the area of metrics and methodologies used in hardware and software usability testing in order to define quantifiable and verifiable usability requirements. A usability test is a human-in-the-loop evaluation where a participant works through a realistic set of representative tasks using the hardware/software under investigation. The purpose of this research is to define metrics and methodologies for measuring and verifying usability in the aerospace domain in accordance with FY09 focus on errors, consistency, and mobility/maneuverability. Usability metrics must be predictive of success with the interfaces, must be easy to obtain and/or calculate, and must meet the intent of current Human Systems Integration Requirements (HSIR). Methodologies must work within the constraints of the aerospace domain, be cost and time efficient, and be able to be applied without extensive specialized training.

  4. Human factors and training the partnership agreement

    International Nuclear Information System (INIS)

    Macris, A.C.; Fleming, S.T.

    1987-01-01

    Four fundamental activities directly affect human performance in operating nuclear power plants: Control Room Design Reviews (CRDR's); Operating Procedures; Training Curriculum Materials; Simulator Training. Typically it was believed that multi-disciplined core teams, for each activity, provided an integration of all activities. Representatives of each discipline (CRDR, Engineering, Training, Simulator Project) provided real time inputs during team deliberations. While these inputs affected team decisions, there were no assurances that any functional follow-up would result. Furthermore, no mechanism existed for systematic integration between activities. Now, with a majority of the Control Room Design Reviews complete, plant specific simulators becoming a reality, and the incorporation of Safety Parameter Display System (SPDS) and Symptom Based EOP's; the reality is that these activities require more systematic integration than was previously recognized. This paper presents an innovative approach for integrating the above four activities using Computer Aided Drafting (CAD) and computerized Data Base Management (DBM) to synergistically optimize human performance

  5. Human factors methods for nuclear control room design. Volume I. Human factors enhancement of existing nuclear control rooms. Final report

    International Nuclear Information System (INIS)

    Seminara, J.L.; Seidenstein, S.; Eckert, S.K.; Smith, D.L.

    1979-11-01

    Human factors engineering is an interdisciplinary specialty concerned with influencing the design of equipment systems, facilities, and operational environments to promote safe, efficient, and reliable operator performance. Human factors approaches were applied in the design of representative nuclear power plant control panels. First, methods for upgrading existing operational control panels were examined. Then, based on detailed human factors analyses of operator information and control requirements, designs of reactor, feedwater, and turbine-generator control panels were developed to improve the operator-control board interface, thereby reducing the potential for operator errors. In addition to examining present-generation concepts, human factors aspects of advanced systems and of hybrid combinations of advanced and conventional designs were investigated. Special attention was given to warning system designs. Also, a survey was conducted among control board designers to (1) develop an overview of design practices in the industry, and (2) establish appropriate measures leading to a more systematic concern for human factors in control board design

  6. Human Factors in Web-Authentication

    Science.gov (United States)

    2009-02-06

    questions is vulnerable to man-in-the-middle ( MITM ) attacks [113, 144]. Since these attacks exploit similar human tendencies as attacks against...researchers have discovered a “Universal Man-in-the-Middle Phishing Kit” [75], a hacker toolkit which enables a phisher to easily set up a MITM ...the-middle ( MITM ) attacker spoofing the login page of the target Web site [113, 144]. 1 When a user attempts to login 1Challenge questions also have

  7. Human factor in the problem of Russian nuclear industry safety

    International Nuclear Information System (INIS)

    Abramova, V.

    2002-01-01

    The approach to human factor definition, considered in the paper, consists of recognition of as many as possible factors for developing a complete list of factors, which have influence on mistakes or successful work of NPP personnel. Safety culture is considered as the main factor. The enhancement in nuclear power industry includes an optimization of organizational structures and development of personnel safety attitudes. The organizational factors, as possible root causes for human errors, need to be identified, assessed and improved. The organizational activities taken in Russia are presented

  8. Human factor engineering applied to nuclear power plant design

    International Nuclear Information System (INIS)

    Manrique, A.; Valdivia, J.C.

    2007-01-01

    Advantages of implementing adequate Human Factor Engineering techniques in the design of nuclear reactors have become not only a fact recognized by the majority of engineers and operators but also an explicit requirement regulated and mandatory for the new designs of the so called advanced reactors. The first step for this is preparing a plan to incorporate all the Human Factor Engineering principles and developing an integral design of the Instrumentation and Control and Man-machine interface systems. Such a plan should state: -) Activities to be performed, and -) Creation of a Human Factor Engineering team adequately qualified. The Human Factor Engineering team is an integral part of the design team and is strongly linked to the engineering organizations but simultaneously has independence to act and is free to evaluate designs and propose changes in order to enhance human behavior. TECNATOM S.A. (a Spanish company) has been a part of the Design and Human Factor Engineering Team and has collaborated in the design of an advanced Nuclear Power Plant, developing methodologies and further implementing those methodologies in the design of the plant systems through the development of the plant systems operational analysis and of the man-machine interface design. The methodologies developed are made up of the following plans: -) Human Factor Engineering implementation in the Man-Machine Interface design; -) Plant System Functional Requirement Analysis; -) Allocation of Functions to man/machine; -) Task Analysis; -) Human-System Interface design; -) Control Room Verification and -) Validation

  9. The development of human factors experimental evaluation techniques -The development of human factors technologies-

    International Nuclear Information System (INIS)

    Sim, Bong Shick; Oh, In Seok; Cha, Kyeong Ho; Lee, Hyun Chul

    1994-04-01

    In the 2nd year of the research project for the development of human factors evaluation techniques, we first defined the experimental target systems by the comparison study of the advanced control rooms proposed by foreign countries in order to make the experiment feasible and realistic for the 10 experimental items selected in the first year of the project. Then we have decided to confine our research on the big board overview panel and operator workstations. Following the development of selection criteria for our research interest, we have identified the design variables which may influence the performance of the operator by the functional analysis. The experimental variables which will be used for the evaluation of the proposed items are then defined by the relational analysis between evaluation items and design variables and they are classified by the characteristics of the measurement data. The functional requirements of ITF are developed to accommodate the necessary functions for carrying out the 10 evaluation items. The functional requirements for each sub-system of ITF have been developed with the experimental paradigm of APTEA. Finally we have reviewed the compact nuclear simulator (CNS) at KAERI from the point of view of jyman factors guidelines/principles and proposed the two possible layouts for the experimental apparatus for the evaluation of display alternative and operational procedure. (Author)

  10. Studying risk factors associated with Human Leptospirosis

    Directory of Open Access Journals (Sweden)

    Ramachandra Kamath

    2014-01-01

    Full Text Available Background: Leptospirosis is one of the most under diagnosed and underreported disease in both developed and developing countries including India. It is established that environmental conditions and occupational habit of the individuals put them at risk of acquiring disease, which varies from community to community. Various seroprevalence studies across the world have documented emerging situation of this neglected tropical disease, but limited have probed to identify the risk factors, especially in India. Objectives: The objective of this study was to identify the environmental and occupational risk factors associated with the disease in Udupi District. Materials and Methods: This population-based case-control study was carried out in Udupi, a District in Southern India from April 2012 until August 2012. Udupi is considered to be endemic for Leptospirosis and reported 116 confirmed cases in the year 2011. Seventy of 116 laboratory confirmed cases and 140 sex matched neighborhood healthy controls participated in the study. A predesigned, semi-structured and validated questionnaire was used for data collection through house to house visit and observations were noted about environmental conditions. Univariate analysis followed by multivariate analysis (back ward conditional logistic regression was performed by using STATA version 9.2 (StataCorp, College Station, TX, USA to identify potential risk factors. Results: Occupational factors such as outdoor activities (matched odds ratio [OR] of 3.95, 95% confidence interval [CI]: 1.19-13.0, presence of cut or wound at body parts during work (matched OR: 4.88, CI: 1.83-13.02 and environmental factors such as contact with rodents through using the food materials ate by rat (matched OR: 4.29, CI: 1.45-12.73 and contact with soil or water contaminated with urine of rat (matched OR: 4.58, CI: 1.43-14.67 were the risk factors identified to be associated with disease. Conclusion: Leptospirosis is still

  11. Recent technology products from Space Human Factors research

    Science.gov (United States)

    Jenkins, James P.

    1991-01-01

    The goals of the NASA Space Human Factors program and the research carried out concerning human factors are discussed with emphasis given to the development of human performance models, data, and tools. The major products from this program are described, which include the Laser Anthropometric Mapping System; a model of the human body for evaluating the kinematics and dynamics of human motion and strength in microgravity environment; an operational experience data base for verifying and validating the data repository of manned space flights; the Operational Experience Database Taxonomy; and a human-computer interaction laboratory whose products are the display softaware and requirements and the guideline documents and standards for applications on human-computer interaction. Special attention is given to the 'Convoltron', a prototype version of a signal processor for synthesizing the head-related transfer functions.

  12. Spent nuclear fuel project, Cold Vacuum Drying Facility human factors engineering (HFE) analysis: Results and findings

    International Nuclear Information System (INIS)

    Garvin, L.J.

    1998-01-01

    This report presents the background, methodology, and findings of a human factors engineering (HFE) analysis performed in May, 1998, of the Spent Nuclear Fuels (SNF) Project Cold Vacuum Drying Facility (CVDF), to support its Preliminary Safety Analysis Report (PSAR), in responding to the requirements of Department of Energy (DOE) Order 5480.23 (DOE 1992a) and drafted to DOE-STD-3009-94 format. This HFE analysis focused on general environment, physical and computer workstations, and handling devices involved in or directly supporting the technical operations of the facility. This report makes no attempt to interpret or evaluate the safety significance of the HFE analysis findings. The HFE findings presented in this report, along with the results of the CVDF PSAR Chapter 3, Hazards and Accident Analyses, provide the technical basis for preparing the CVDF PSAR Chapter 13, Human Factors Engineering, including interpretation and disposition of findings. The findings presented in this report allow the PSAR Chapter 13 to fully respond to HFE requirements established in DOE Order 5480.23. DOE 5480.23, Nuclear Safety Analysis Reports, Section 8b(3)(n) and Attachment 1, Section-M, require that HFE be analyzed in the PSAR for the adequacy of the current design and planned construction for internal and external communications, operational aids, instrumentation and controls, environmental factors such as heat, light, and noise and that an assessment of human performance under abnormal and emergency conditions be performed (DOE 1992a)

  13. Human Factors for Situation Assessment in Grid Operations

    Energy Technology Data Exchange (ETDEWEB)

    Guttromson, Ross T.; Schur, Anne; Greitzer, Frank L.; Paget, Mia L.

    2007-08-08

    Executive Summary Despite advances in technology, power system operators must assimilate overwhelming amounts of data to keep the grid operating. Analyses of recent blackouts have clearly demonstrated the need to enhance the operator’s situation awareness (SA). The long-term objective of this research is to integrate valuable technologies into the grid operator environment that support decision making under normal and abnormal operating conditions and remove non-technical barriers to enable the optimum use of these technologies by individuals working alone and as a team. More specifically, the research aims to identify methods and principles to increase SA of grid operators in the context of system conditions that are representative or common across many operating entities and develop operationally relevant experimental methods for studying technologies and operational practices which contribute to SA. With increasing complexity and interconnectivity of the grid, the scope and complexity of situation awareness have grown. New paradigms are needed to guide research and tool development aimed to enhance and improve operations. In reviewing related research, operating practices, systems, and tools, the present study established a taxonomy that provides a perspective on research and development surrounding power grid situation awareness and clarifies the field of human factors/SA for grid operations. Information sources that we used to identify critical factors underlying SA included interviews with experienced operational personnel, available historical summaries and transcripts of abnormal conditions and outages (e.g., the August 14, 2003 blackout), scientific literature, and operational policies/procedures and other documentation. Our analysis of August 2003 blackout transcripts and interviews adopted a different perspective than previous analyses of this material, and we complemented this analysis with additional interviews. Based on our analysis and a broad

  14. Status of human factors engineering system design in Europe

    International Nuclear Information System (INIS)

    Ives, G.

    1990-01-01

    A review of the European status of human factors engineering has been carried out covering a wide scope of activities which includes psychology, cognitive science, ergonomics, design, training, procedure writing, operating, artificial intelligence and expert systems. There is an increasing awareness of the part that human factors play in major nuclear power plant accidents. The emphasis of attention in human factors is changing. In some areas there are encouraging signs of progress and development, but in other areas there is still scope for improvement

  15. Information Technology: A challenge to the Human Factors Society?

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1988-01-01

    In his presidential address at the annual meeting of the Human Factors Society, Julian Christensen urged the members of the society to spread the gospel and to persuade the members of other professional societies such as psychologists,sociologists and engineers to join the Human Factors Society......, the argument being that advanced technology requires a cross-disciplinary approach to human factors problems. In the present note, I would like to support this presidential effort. In fact, I will go further in that direction and argue that the present fast pace of information technology threatens to overrun...

  16. Review of the impact of environmental factors on human performance

    International Nuclear Information System (INIS)

    Echeverria, D.; Barnes, V.; Bittner, A.

    1990-01-01

    The purpose of this project is to determine the effects of various environmental factors such as vibration, noise, heat, cold, and illumination on task performance in U.S. nuclear power plants. Although the effects of another environmental factor, radiation, is of concern to licensees and the Nuclear Regulatory Commission (NRC), much less attention has been paid to the potential effects of these other environmental factors. Performance effects from these environmental factors have been observed in other industries; for example, vibration can impair vision and noise can cause short- or long-term hearing loss. A primary goal of this project is to provide the technical basis for determining the likelihood of these factors affecting task performance in nuclear power plants, and thus the safety of the public

  17. Training department's role in human factor analysis during post-trip reviews

    International Nuclear Information System (INIS)

    Goodman, D.

    1987-01-01

    Provide training is a frequent corrective action specified in a post-trip review report. This corrective action is most often decided upon by technical and operational staff, not training staff, without a detailed analysis of whether training can resolve the immediate problem or enhance employees' future performance. A more specific human factor or performance problem analysis would often reveal that training cannot impact or resolve the concern to avoid future occurrences. This human factor analysis is similar to Thomas Gilbert's Behavior Engineering Model (Human Competence, McGraw-Hill, 1978) or Robert Mager's/Peter Pipe's Performance Analysis (Analyzing Performance Problems, Pitman Learning, 1984). At Palo Verde Nuclear Generating Station, training analysts participate in post-trip reviews in order to conduct or provide input to this type of human factor and performance problem analysis. Their goal is to keep provide training out of corrective action statements unless training can in fact impact or resolve the problem. The analysts follow a plant specific logic diagram to identify human factors and to identify whether changes to the environment or to the person would best resolve the concern

  18. Taiwanese Technical Education Teachers' Professional Development: An Examination of Some Critical Factors

    Science.gov (United States)

    Chang, Jen-Chia; Yeh, Yu-Mei; Chen, Su-Chang; Hsiao, Hsi-Chi

    2011-01-01

    There is a lack of research in the area of the influence that task autonomy (TA), organizational learning (OL), and group cohesiveness (GC) can have on technical education teachers' innovation of professional development (IOPD). Therefore, this study aimed to probe into the influences of TA, OL, and GC on IOPD by technical education teachers, and…

  19. Human Factors Regulatory Research Program Plan, FY 1989--FY 1992

    International Nuclear Information System (INIS)

    Coffman, F.; Persensky, J.; Ryan, T.; Ramey-Smith, A.; Goodman, C.; Serig, D.; Trager, E; Nuclear Regulatory Commission, Washington, DC; Nuclear Regulatory Commission, Washington, DC; Nuclear Regulatory Commission, Washington, DC

    1989-10-01

    This report describes the currently ongoing (FY 1989) and planned (FY 1989-1992) Human Factors Regulatory Research Program in the NRC Office of Nuclear Regulatory Research (RES). Examples of the influence of human factors on nuclear safety are presented, and the role of personnel is discussed. Current regulatory issues associated with human factors in the nuclear system and the purpose of the research plan are provided. The report describes the research process applied to the human factors research issues and the program activities: Personnel Performance Measurement, Personnel Subsystem, Human-System Interface. Organization and Management, and Reliability Assessment. The research being conducted within each activity is summarized along with the objectives, background information, and expected regulatory products. Budget and personnel forecasts are provided along with a summary of contractors performing some of the ongoing research. Appendices contain a chronology of human factors research at NRC, a description of the research approach, an update on human factors programs and initiatives in RES and other NRC offices, and the integration among these programs. 46 refs., 5 tabs

  20. Nuclear Regulatory Commission Human Factors Program Plan. Revision 2

    International Nuclear Information System (INIS)

    1986-04-01

    This document is the Second Annual Revision to the NRC Human Factors Program Plan. The first edition was published in August 1983. Revision 1 was published in July of 1984. Purpose of the NRC Human Factors Program is to ensure that proper consideration is given to human factors in the design and operation of nuclear power plants. This document describes the plans of the Office of Nuclear Reactor Regulation to address high priority human factors concerns of importance to reactor safety in FY 1986 and FY 1987. Revision 2 of the plan incorporates recent Commission decisions and policies bearing on the human factors aspects of reactor safety regulation. With a few exceptions, the principal changes from prior editions reflect a shift from developing new requirements to staff evaluation of industry progress in resolving human factors issues. The plan addresses seven major program elements: (1) Training, (2) Licensing Examinations, (3) Procedures, (4) Man-Machine Interface, (5) Staffing and Qualifications, (6) Management and Organization, and (7) Human Performance

  1. Variation of Phenolic Content in Globe Artichoke in Relation to Biological, Technical and Environmental Factors

    Directory of Open Access Journals (Sweden)

    Sara Lombardo

    2009-12-01

    Full Text Available In Italy, globe artichoke production is prevailingly concentrated in the South and islands, where it provides an important contribution to the agricultural economy. In recent years, there has been a renewed interest in this crop as a promising source of polyphenols, a heterogeneous class of secondary metabolites characterized by various healthy properties well-documented in literature. The phenolic fraction, present in the different artichoke plant parts, varies widely in relation to biotic and abiotic factors. Therefore, the present study aimed at evaluating the variation of phenolic content in globe artichoke in relation to biological, technical and environmental factors. Two field-experiments were carried out in Sicily (South Italy in two representative cultivation areas, in order to examine the effects of genotype, head fraction, season conditions, planting density and arrangement on the globe artichoke phenolic concentration. Both the total polyphenols and the individual phenolic compounds detected were notably genotype- dependent. Particularly, the high level of caffeoylquinic acids (chlorogenic acid, among others and apigenin 7- O-glucuronide, reported respectively by “Violetto di Sicilia” and “Romanesco clone C3”, could be used to encourage globe artichoke fresh consumption. Total polyphenols content also resulted more abundant in specific accumulation sites within the inflorescence, such as the floral stem and receptacle, and for most of genotypes it decreased during the second year in response to the different meteorological conditions. Additionally, total polyphenols content significantly and linearly increased as plant density increased from 1.0 to 1.8 plant m-2 and it significantly increased by 13% passing from single to twin rows plant arrangement.

  2. Variation of Phenolic Content in Globe Artichoke in Relation to Biological, Technical and Environmental Factors

    Directory of Open Access Journals (Sweden)

    Giovanni Mauromicale

    2011-02-01

    Full Text Available In Italy, globe artichoke production is prevailingly concentrated in the South and islands, where it provides an important contribution to the agricultural economy. In recent years, there has been a renewed interest in this crop as a promising source of polyphenols, a heterogeneous class of secondary metabolites characterized by various healthy properties well-documented in literature. The phenolic fraction, present in the different artichoke plant parts, varies widely in relation to biotic and abiotic factors. Therefore, the present study aimed at evaluating the variation of phenolic content in globe artichoke in relation to biological, technical and environmental factors. Two field-experiments were carried out in Sicily (South Italy in two representative cultivation areas, in order to examine the effects of genotype, head fraction, season conditions, planting density and arrangement on the globe artichoke phenolic concentration. Both the total polyphenols and the individual phenolic compounds detected were notably genotype- dependent. Particularly, the high level of caffeoylquinic acids (chlorogenic acid, among others and apigenin 7- O-glucuronide, reported respectively by “Violetto di Sicilia” and “Romanesco clone C3”, could be used to encourage globe artichoke fresh consumption. Total polyphenols content also resulted more abundant in specific accumulation sites within the inflorescence, such as the floral stem and receptacle, and for most of genotypes it decreased during the second year in response to the different meteorological conditions. Additionally, total polyphenols content significantly and linearly increased as plant density increased from 1.0 to 1.8 plant m-2 and it significantly increased by 13% passing from single to twin rows plant arrangement.

  3. A data envelope analysis to assess factors affecting technical and economic efficiency of individual broiler breeder hens.

    Science.gov (United States)

    Romero, L F; Zuidhof, M J; Jeffrey, S R; Naeima, A; Renema, R A; Robinson, F E

    2010-08-01

    This study evaluated the effect of feed allocation and energetic efficiency on technical and economic efficiency of broiler breeder hens using the data envelope analysis methodology and quantified the effect of variables affecting technical efficiency. A total of 288 Ross 708 pullets were placed in individual cages at 16 wk of age and assigned to 1 of 4 feed allocation groups. Three of them had feed allocated on a group basis with divergent BW targets: standard, high (standard x 1.1), and low (standard x 0.9). The fourth group had feed allocated on an individual bird basis following the standard BW target. Birds were classified in 3 energetic efficiency categories: low, average, and high, based on estimated maintenance requirements. Technical efficiency considered saleable chicks as output and cumulative ME intake and time as inputs. Economic efficiency of feed allocation treatments was analyzed under different cost scenarios. Birds with low feed allocation exhibited a lower technical efficiency (69.4%) than standard (72.1%), which reflected a reduced egg production rate. Feed allocation of the high treatment could have been reduced by 10% with the same chick production as the standard treatment. The low treatment exhibited reduced economic efficiency at greater capital costs, whereas high had reduced economic efficiency at greater feed costs. The average energetic efficiency hens had a lower technical efficiency in the low compared with the standard feed allocation. A 1% increment in estimated maintenance requirement changed technical efficiency by -0.23%, whereas a 1% increment in ME intake had a -0.47% effect. The negative relationship between technical efficiency and ME intake was counterbalanced by a positive correlation of ME intake and egg production. The negative relationship of technical efficiency and maintenance requirements was synergized by a negative correlation of hen maintenance and egg production. Economic efficiency methodologies are effective

  4. Paresthesia-Independence: An Assessment of Technical Factors Related to 10 kHz Paresthesia-Free Spinal Cord Stimulation.

    Science.gov (United States)

    De Carolis, Giuliano; Paroli, Mery; Tollapi, Lara; Doust, Matthew W; Burgher, Abram H; Yu, Cong; Yang, Thomas; Morgan, Donna M; Amirdelfan, Kasra; Kapural, Leonardo; Sitzman, B Todd; Bundschu, Richard; Vallejo, Ricardo; Benyamin, Ramsin M; Yearwood, Thomas L; Gliner, Bradford E; Powell, Ashley A; Bradley, Kerry

    2017-05-01

    Spinal cord stimulation (SCS) has been successfully used to treat chronic intractable pain for over 40 years. Successful clinical application of SCS is presumed to be generally dependent on maximizing paresthesia-pain overlap; critical to achieving this is positioning of the stimulation field at the physiologic midline. Recently, the necessity of paresthesia for achieving effective relief in SCS has been challenged by the introduction of 10 kHz paresthesia-free stimulation. In a large, prospective, randomized controlled pivotal trial, HF10 therapy was demonstrated to be statistically and clinically superior to paresthesia-based SCS in the treatment of severe chronic low back and leg pain. HF10 therapy, unlike traditional paresthesia-based SCS, requires no paresthesia to be experienced by the patient, nor does it require paresthesia mapping at any point during lead implant or post-operative programming. To determine if pain relief was related to technical factors of paresthesia, we measured and analyzed the paresthesia responses of patients successfully using HF10 therapy. Prospective, multicenter, non-randomized, non-controlled interventional study. Outpatient pain clinic at 10 centers across the US and Italy. Patients with both back and leg pain already implanted with an HF10 therapy device for up to 24 months were included in this multicenter study. Patients provided pain scores prior to and after using HF10 therapy. Each patient's most efficacious HF10 therapy stimulation program was temporarily modified to a low frequency (LF; 60 Hz), wide pulse width (~470 mus), paresthesia-generating program. On a human body diagram, patients drew the locations of their chronic intractable pain and, with the modified program activated, all regions where they experienced LF paresthesia. Paresthesia and pain drawings were then analyzed to estimate the correlation of pain relief outcomes to overlap of pain by paresthesia, and the mediolateral distribution of paresthesia (as a

  5. Human factors survey of advanced instrumentation and controls

    International Nuclear Information System (INIS)

    Carter, R.J.

    1989-01-01

    A survey oriented towards identifying the human factors issues in regard to the use of advanced instrumentation and controls (I ampersand C) in the nuclear industry was conducted. A number of United States (US) and Canadian nuclear vendors and utilities were participants in the survey. Human factors items, subsumed under the categories of computer-generated displays (CGD), controls, organizational support, training, and related topics, were discussed. The survey found the industry to be concerned about the human factors issues related to the implementation of advanced I ampersand C. Fifteen potential human factors problems were identified. They include: the need for an advanced I ampersand C guideline equivalent to NUREG-0700; a role change in the control room from operator to supervisor; information overload; adequacy of existing training technology for advanced I ampersand C; and operator acceptance and trust. 11 refs., 1 tab

  6. Human Factors Science: Brief History and Applications to Healthcare.

    Science.gov (United States)

    Parker, Sarah Henrickson

    2015-12-01

    This section will define the science of human factors, its origins, its impact on safety in other domains, and its impact and potential for impact on patient safety. Copyright © 2015 Mosby, Inc. All rights reserved.

  7. FAA airborne data link human factors research plan

    Science.gov (United States)

    1993-07-01

    This report contains a five-year plan to perform research of human factors issues and topics : related to Data Link implementations in general aviation and transport category aircraft. : Elements such as resource allocation and management and coordin...

  8. Factors associated with pentosidine accumulation in the human vitreous

    NARCIS (Netherlands)

    Van Deemter, Marielle; Bank, Ruud A.; Vehof, Jelle; Hooymans, Johanna M. M.; Los, Leonoor I.

    Purpose: To explore factors associated with pentosidine accumulation in the human vitreous. Methods: Vitreous samples were obtained during trans pars plana vitrectomy for macular hole or rhegmatogenous retinal detachment. Patient characteristics included age, gender, and diabetes mellitus. Ocular

  9. Local Risk Factors in Genital Human Papilloma Virus Infection in ...

    African Journals Online (AJOL)

    Keywords: Genital human papilloma virus, Pap smear, Risk factors. Access this article online .... their Pap smears taken and questionnaires on sexual attitudes, .... the high‑risk types, which mediate the response of the enhancer to steroid ...

  10. Traditional Values, Socio-Cultural Factors and Human Resource ...

    African Journals Online (AJOL)

    ... Values, Socio-Cultural Factors and Human Resource Management Practices in ... Ghanaian worker in general and the HR manager in particular is influenced ... face -to-face interview methods were used to obtain information for the study.

  11. Human factors methods for nuclear control room design. Volume 2. Human factors survey of control room design practices

    International Nuclear Information System (INIS)

    Seminara, J.L.; Parsons, S.O.

    1979-11-01

    An earlier review of the control rooms of operating nuclear power plants identified many design problems having potential for degrading operator performance. As a result, the formal application of human factors principles was found to be needed. This report demonstrates the use of human factors in the design of power plant control rooms. The approaches shown in the report can be applied to operating power plants, as well as to those in the design stage. This study documents human factors techniques required to provide a sustained concern for the man-machine interface from control room concept definition to system implementation

  12. Perspective on Human and Organizational Factors (HOF) - Attempt of a Systemic Approach

    International Nuclear Information System (INIS)

    Meynen, F.

    2016-01-01

    The presentation will raise questions concerning current conceptions and practices related to human and organizational factors and will focus on the need of a more systemic view and approaches in the nuclear industry. In practice, attention is often focused unilaterally on technical aspects, neglecting the interactions and interfaces between the organization, the people and the technology. The work in the different areas takes place with different approaches, based on different technical backgrounds but also on different cultures of the country, the company, the plant, etc. Also within the concept of defence-in-depth the attention normally lies on the technical safety levels, although similar provisions exist in the organizational field. While the technical systems are always evolving and their reliability increases, the question of their implications for the organizations and the people who work with these systems is not always analysed in depth. Also, it should not be focused only on the staff in the control room. Attention must be directed also to the support organizations (maintenance, analysis, monitoring, etc.) and to the manufacturer, which play a significant and sometimes underestimated role in the overall system as well. Further, there is a tendency to reduce the complexity by looking at individual aspects such as “safety culture”, “resilience”, “management systems”, “training”, “organizational structure”, etc., often without going beyond into a systemic approach. This requires the involvement of all different disciplines. Hence, dealing with the issue of HOF also means creating a basis to understand the complexity of the interactions between human, organizational and technical aspects. For this a very good knowledge and solid experience in these different fields are required. The presentation will give some examples from other industries and the three major nuclear accidents of Three Mile Island, Chernobyl and Fukushima as an

  13. Human factor as nuclear safety element

    International Nuclear Information System (INIS)

    Valeca, S.C.; Preda, M.; Valeca, M.; Ana, E. M.; Popescu, D.

    2008-01-01

    National nuclear power system is based on western technology, it covers almost 20% from national need and could be briefly described by: - Safety and economic performances of Cernavoda NPP Unit 1; - Reduced influence on environment, population and workers; - Excellent ranking (place 4) among CANDU units from all over the world. Also, the national nuclear power system plays a major role in Romanian power policy accomplishment: - Energy safety and independence assurance; - Decrease of production of greenhouse effect gases; - Preserve the stability and adequacy of energy cost. 'Nuclear Safety' concept covers all the activities resulting from nuclear fuel cycle. By taking into account the international experience, the related activities are estimated to last around 70 years in Romania: - 10 years for site description and selection, design, manufacturing and commissioning activities; - 40 years for Nuclear Power Plant operation, maintenance and modernization activities; - 20 years for preservation and decommissioning activities. The above mentioned activities requires human resources, qualified and specialized in the following areas: - research and development; - equipment design, manufacturing and operation; - components construction and assembly, operation and maintenance. (authors)

  14. Human capital – investing in man (intangible development factors

    Directory of Open Access Journals (Sweden)

    Tadeusz Ziejewski

    2011-01-01

    Full Text Available The main issue considered in the paper is a man, and his place and role in the work environment in the knowledge driven development. The author emphasises the significance of the human factor and analyses related terms against the background of the contemporary social economics. The human capital as a development factor is a modern strategy for achieving competitive advantages on the market.

  15. A report on human factors in nuclear safety

    International Nuclear Information System (INIS)

    1983-03-01

    Following the Three Mile Island incident of 1979, studies were undertaken by the Atomic Energy Control Board (AECB), in-house and through outside consultants, to address the role of human factors in the regulatory process. This report by the Advisory Committee on Nuclear Safety (ACNS) comments briefly on these studies and offers suggestions which would promote a more formal treatment of human factors by the AECB

  16. Human factors at the Department of Energy National Laboratories

    International Nuclear Information System (INIS)

    Pond, D.J.; Waters, R.M.

    1991-01-01

    After World War II, a system of national laboratories was created to foster a suitable environment for scientific research. This paper reports that today, human factors activities are in evidence at most of the nine U.S. Department of Energy multi-program national laboratories as well as at a number of special program facilities. This paper provides historical and future perspectives on the DOE's human factors programs

  17. Development of human factors engineering guide for nuclear power project

    International Nuclear Information System (INIS)

    Wu Dangshi; Sheng Jufang

    1997-01-01

    'THE PRACTICAL GUIDE FOR APPLICATION OF HUMAN FACTORS ENGINEERING TO NUCLEAR POWER PROJECT (First Draft, in Chinese)', which was developed under a research program sponsored by National Nuclear Safety Administration (NNSA) is described briefly. It is hoped that more conscious, more systematical and more comprehensive application of Human Factors Engineering to the nuclear power projects from the preliminary feasibility studies up to the commercial operation will benefit the safe, efficient and economical operations of nuclear power plants in China

  18. Improving human performance: Industry factors influencing the ability to perform

    OpenAIRE

    Güera Massyn Romo

    2013-01-01

    Learning interventions and new technologies that aim to improve human performance must take cognisance of industry factors inhibiting human performance. The dynamic and fast pace nature of the Information and Communication Technologies (ICT) and the engineering industries do not lend themselves to proper skills planning and management. These industries experience real skills gaps, to some of which they contribute by themselves. This study reports on these performance-inhibiting factors such a...

  19. Human Factors: Spanning the Gap between OM & HRM

    NARCIS (Netherlands)

    W.P. Neumann (Patrick); J. Dul (Jan)

    2010-01-01

    textabstractPurpose: This paper examines the claim that the application of human factors (HF) knowledge can improve both human well-being and operations system performance. Methodology: A systematic review was conducted using a general and two specialist databases to identify empirical studies

  20. Prevalence of malaria and human blood factors among patients in ...

    African Journals Online (AJOL)

    Background: Malaria has been and is still a major protozoan disease affecting the human population. Erythrocyte polymorphisms (mainly in blood groups and genotypes) influence the susceptibility to severe malaria. Aim: This study is aimed at assessing the prevalence malaria in relation to human blood factor and to ...

  1. Work ability and associated factors of Brazilian technical-administrative workers in education.

    Science.gov (United States)

    Godinho, Marluce Rodrigues; Greco, Rosangela Maria; Teixeira, Maria Teresa Bustamante; Teixeira, Liliane Reis; Guerra, Maximiliano Ribeiro; Chaoubah, Alfredo

    2016-01-02

    Studies about work ability have grown in importance owing to the worldwide aging of active populations. Research has shown that measuring work ability has a predictive value in cases of long-term sickness absence and early retirement. Our goal was to analyze the work ability and associated factors of civil servants from a higher education institution in Brazil. The participants in this cross-sectional study were 600 technical-administrative workers at a public university. Work ability was measured using the work ability index. The participants were as follows: 51.8% male; mean age of 45 years (SD = ±11); married or in a stable union (61.5%); holding a graduate degree (56.7%); having only one job (83.3%), working 40 h a week or less (78.6%); not working evenings (79.8%); and having direct contact with the public (58.3%). The prevalence of reduced work ability was 13.9%. The following factors were found to be associated with reduced work ability: age 50 years old or above (PR = 2.58; 95% CI 1.25-5.09); female (PR = 2.77; 95% CI 1.25-3.60); education up to secondary school (PR = 2.37; 95% CI 1.13-3.59); overall poor self-assessed health (PR = 2.96; 95% CI 1.32-3.93); signs and symptoms of depression (PR = 4.86; 95% CI 2.23-6.55); sedentariness (PR = 3.00; 95% CI 1.38-4.68) and poor social support at work (PR = 4.01; 95% CI 1.66-4.37). Most of the participants showed good work ability, but some subjects had reduced work ability. This study makes a contribution to expanding the discussion about the factors associated with work ability toward proposing actions for maintaining that ability or helping recovery in the case of diminished ability. Such actions can help reduce work absenteeism and early retirement, both of which have a social and economic impact in Brazil. Studying the determinants of work ability and recommendations to address those determinants will help efforts to improve the quality of life of individuals, both at work and personally, and promote healthy

  2. The use of simulation in the development of human factors guidelines for alarm systems

    International Nuclear Information System (INIS)

    O'Hara, J.; Brown, W.S.; Wachtel, J.; Persensky, J.

    1997-01-01

    This paper describes a research program sponsored by the US Nuclear Regulatory Commission to address the human factors engineering (HFE) aspects of nuclear power plant alarm systems. The overall objective of the program is to develop HFE review guidance for advanced alarm systems. As part of this program, guidance was developed based on a broad review and analysis of technical and research literature. In the course of guidance development, aspects of alarm system design for which the technical basis was insufficient to support guidance developed were identified. Experimental research is currently underway to address the highest priority topics: alarm processing and display characteristics. This paper provides an overview of the approach to guidance development and discusses the role of simulation in the development approach. Finally, the current simulator-based experiment is described to illustrate how the alarm system design features are being studied

  3. Tissue factor-dependent activation of tritium-labeled factor IX and factor X in human plasma

    International Nuclear Information System (INIS)

    Morrison, S.A.; Jesty, J.

    1984-01-01

    A comparism was made of the tissue factor-dependent activation of tritium-labeled factor IX and factor X in a human plasma system and a study was made of the role of proteases known to stimulate factor VII activity. Plasma was defibrinated by heating and depleted of its factors IX and X by passing it through antibody columns. Addition of human brain thromboplastin, Ca2+, and purified 3H-labeled factor X to the plasma resulted, after a short lag, in burst-like activation of the factor X, measured as the release of radiolabeled activation peptide. The progress of activation was slowed by both heparin and a specific inhibitor of factor Xa but factor X activation could not be completely abolished by such inhibitors. In the case of 3H-factor IX activation, the rate also increased for approximately 3 min after addition of thromboplastin, but was not subsequently curtailed. A survey of proteases implicated as activators of factor VII in other settings showed that both factor Xa and factor IXa could accelerate the activation of factor IX. However, factor Xa was unique in obliterating activation when present at concentrations greater than approximately 1 nM. Heparin inhibited the tissue factor-dependent activation of factor IX almost completely, apparently through the effect of antithrombin on the feedback reactions of factors Xa and IXa on factor VII. These results suggest that a very tight, biphasic control of factor VII activity exists in human plasma, which is modulated mainly by factor Xa. At saturation of factor VIIa/tissue factor, factor IX activation was significantly more rapid than was previously found in bovine plasma under similar conditions. The activation of factor X at saturation was slightly more rapid than in bovine plasma, despite the presence of heparin

  4. Studies of safety and critical work situations in nuclear power plants: A human factors perspective

    International Nuclear Information System (INIS)

    Jacobsson Kecklund, L.

    1998-05-01

    The purpose of this thesis was to develop and apply different approaches for analyzing safety in critical work situations in real work settings in nuclear power plants, and also to identify safety enhancing measures by using the framework of interaction between human, organizational and technical subsystems. A Cognitive Psychology as well as a Stress Psychology framework was used. All studies were related to the annual outage operational state where the need for coping with many infrequent tasks, often carried out under high time pressure, puts great strain on the staff and organisation of the plant. In three studies the natural variations in the plant state, normal operation and annual outage operation, were used to explore human performance, work-related factors as well as coping and the operators' own resources and the relationship between them. In the annual outage condition high work demands, decreased sleepiness at night shift, more errors and less satisfaction with work performance quality was reported by maintenance as well as by control room operators. A relationship between high work demands and more organizational problems and reports of more frequent human errors and lower satisfactions with work performance quality was also identified in the annual outage condition. Moreover, a relationship between increased sleepiness during night shift, more frequent use of coping strategies and a higher frequency of human errors was reported. In two studies the Event and Barrier Function Model was applied to analyze the safety of barrier function systems inserted into work process sequences to protect the systems from the negative consequences of failures and errors. The model was also used to assess safety in relation to a technical and organizational change. The last study addressed changes in work performance and work-related factors in relation to a technical and organizational change of a safety significant work process involving increased automation and new

  5. Research into human factors affecting the railway system; Studien zu menschlichen Einflussfaktoren im Eisenbahnsystem

    Energy Technology Data Exchange (ETDEWEB)

    Hammerl, Malte; Feldmann, Frederike; Rumke, Axel; Pelz, Markus [DLR e.V., Braunschweig (Germany). Inst. fuer Verkehrssystemtechnik

    2010-07-01

    The Institute for Transportation Systems (ITS) at the German Aerospace Center DLR in Braunschweig has for many years been conducting research into current and future topics relating to railway transportation. Supplementing the in-house technical infrastructure including e.g. RailSiTe {sup registered} (Rail Simulation and Testing) and RailDriVE {sup registered} (Rail Driving Validation Environment), a new test environment for Rail Human Factors Research has been established to investigate such factors as they affect locomotive drivers. The aim is to analyse current issues and new concepts regarding human-machine interaction and test them under conditions that are as true-to-life as possible without exposure to real-life safety-critical situations. The test environment allows for investigation across the spectrum, starting with workplace analysis and going on from potential modifications to existing user interfaces through to the analysis of prototype assistance systems. (orig.)

  6. A formal design verification and validation on the human factors of a computerized information system in nuclear power plants

    International Nuclear Information System (INIS)

    Lee, Yong Hee; Park, Jae Chang; Cheon, Se Woo; Jung, Kwang Tae; Baek, Seung Min; Han, Seung; Park, Hee Suk; Son, Ki Chang; Kim, Jung Man; Jung Yung Woo

    1999-11-01

    This report describe a technical transfer under the title of ''A formal design verification and validation on the human factors of a computerized information system in nuclear power plants''. Human factors requirements for the information system designs are extracted from various regulatory and industrial standards and guidelines, and interpreted into a more specific procedures and checklists for verifying the satisfaction of those requirements. A formalized implementation plan is established for human factors verification and validation of a computerized information system in nuclear power plants. Additionally, a Computer support system, named as DIMS-web (design Issue Management System), is developed based upon web internet environment so as to enhance the implementation of the human factors activities. DIMS-Web has three maine functions: supporting requirements review, tracking design issues, and management if issues screening evaluation. DIMS-Web shows its benefits in practice through a trial application to the design review of CFMS for YGN nuclear unit 5 and 6. (author)

  7. The integration of Human Factors (HF) in the SAR process training course text

    International Nuclear Information System (INIS)

    Ryan, T.G.

    1995-03-01

    This text provides the technical basis for a two-day course on human factors (HF), as applied to the Safety Analysis Report (SAR) process. The overall objective of this text and course is to: provide the participant with a working knowledge of human factors-related requirements, suggestions for doing a human safety analysis applying a graded approach, and an ability to demonstrate using the results of the human safety analysis, that human factors elements as defined by DOE (human factors engineering, procedures, training, oversight, staffing, qualifications), can support wherever necessary, nuclear safety commitments in the SAR. More specifically, the objectives of the text and course are: (1) To provide the SAR preparer with general guidelines for doing HE within the context of a graded approach for the SAR; (2) To sensitize DOE facility managers and staff, safety analysts and SAR preparers, independent reviewers, and DOE reviewers and regulators, to DOE Order 5480.23 requirements for HE in the SAR; (3) To provide managers, analysts, reviewers and regulators with a working knowledge of HE concepts and techniques within the context of a graded approach for the SAR, and (4) To provide SAR managers and DOE reviewers and regulators with general guidelines for monitoring and coordinating the work of preparers of HE inputs throughout the SAR process, and for making decisions regarding the safety relevance of HE inputs to the SAR. As a ready reference for implementing the human factors requirements of DOE Order 5480.22 and DOE Standard 3009-94, this course text and accompanying two-day course are intended for all persons who are involved in the SAR

  8. The integration of Human Factors (HF) in the SAR process training course text

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, T.G.

    1995-03-01

    This text provides the technical basis for a two-day course on human factors (HF), as applied to the Safety Analysis Report (SAR) process. The overall objective of this text and course is to: provide the participant with a working knowledge of human factors-related requirements, suggestions for doing a human safety analysis applying a graded approach, and an ability to demonstrate using the results of the human safety analysis, that human factors elements as defined by DOE (human factors engineering, procedures, training, oversight, staffing, qualifications), can support wherever necessary, nuclear safety commitments in the SAR. More specifically, the objectives of the text and course are: (1) To provide the SAR preparer with general guidelines for doing HE within the context of a graded approach for the SAR; (2) To sensitize DOE facility managers and staff, safety analysts and SAR preparers, independent reviewers, and DOE reviewers and regulators, to DOE Order 5480.23 requirements for HE in the SAR; (3) To provide managers, analysts, reviewers and regulators with a working knowledge of HE concepts and techniques within the context of a graded approach for the SAR, and (4) To provide SAR managers and DOE reviewers and regulators with general guidelines for monitoring and coordinating the work of preparers of HE inputs throughout the SAR process, and for making decisions regarding the safety relevance of HE inputs to the SAR. As a ready reference for implementing the human factors requirements of DOE Order 5480.22 and DOE Standard 3009-94, this course text and accompanying two-day course are intended for all persons who are involved in the SAR.

  9. Password Authentication from a Human Factors Perspective: Results of a Survey Among End-Users

    DEFF Research Database (Denmark)

    Hoonakker, Peter; Bornoe, Nis; Carayon, Pascale

    2009-01-01

    Considering that many organizations today are extremely dependent on information technology, computer and information security (CIS) has become a critical concern from a business viewpoint. CIS is concerned with protecting the confidentiality, integrity, accessible information, when using computer...... systems. Much research has been conducted on CIS in the past years. However, the attention has been primarily focused on technical problems and solutions. Only recently, the role of human factors in CIS has been recognized. End-user behavior can increase the vulnerability of computer and information...

  10. Modelling of safety barriers including human and organisational factors to improve process safety

    DEFF Research Database (Denmark)

    Markert, Frank; Duijm, Nijs Jan; Thommesen, Jacob

    2013-01-01

    It is believed that traditional safety management needs to be improved on the aspect of preparedness for coping with expected and unexpected deviations, avoiding an overly optimistic reliance on safety systems. Remembering recent major accidents, such as the Deep Water Horizon, the Texas City....... A valuable approach is the inclusion of human and organisational factors into the simulation of the reliability of the technical system using event trees and fault trees and the concept of safety barriers. This has been demonstrated e.g. in the former European research project ARAMIS (Accidental Risk...

  11. The human factor as a cause of failures in building structures

    Directory of Open Access Journals (Sweden)

    Vondráčková Terezie

    2017-01-01

    Full Text Available Human error can be defined as any unintentional or inadequate decision, taken at any level in the hierarchy of an organization, which is, or was inappropriate in a given situation. Human errors can occur in all human activities across an organization - at a managerial, conceptual or technical level – in connection with mistakes in the construction project itself, mistakes made by the investor, mistakes made by those using the building, mistakes in supplier relations, mistakes in the maintenance of the structure, and others. The factors that can affect the reliability of those people making the decisions that lead to the mistakes include the quality of their education, their experience with stress, or lack thereof, as well as issues such as workload, fatigue, workplace ergonomics, working hours, social climate and private matters.

  12. Towards a sustainable world through human factors and ergonomics: it is all about values.

    Science.gov (United States)

    Lange-Morales, Karen; Thatcher, Andrew; García-Acosta, Gabriel

    2014-01-01

    In this paper, we analyse two approaches that attempt to address how a human factors and ergonomics (HFE) perspective can contribute to the sustainability of the human race. We outline the principles, purposes and fields of application of ergoecology and green ergonomics, and thereafter deal with their context of emergence, and the overlaps in purpose, and principles. Shared values are deduced and related to socio-technical principles for systems' design. Social responsibility and environmental/ecospheric responsibility are the leading threads of ergoecology and green ergonomics, giving rise to the values of: respect for human rights, respect for the Earth, respect for ethical decision-making, appreciation of complexity, respect for transparency and openness, and respect for diversity. We discuss the consequences of considering these values in HFE theory and practice.

  13. Human-factor operating concept for Borssele Nuclear Power Station

    International Nuclear Information System (INIS)

    Wieman, J.L.

    1995-01-01

    The safety level in the operation of a reactor is determined basically by human beings. The Borssele Nuclear Power Station has carried out measures for improving the man-machine interface through training and operating instructions for the shift personnel. The retrofitting of control technology relevant to safety engineering should avoid operating instructions which can cause potential failures. A safety study has shown that the remaining risk following all retrofitting measures remains dependent to the extent of 80% on human factors and that human factors as a whole have a positive effect on reactor safety. (orig.) [de

  14. Human Factor Modelling in the Risk Assessment of Port Manoeuvers

    Directory of Open Access Journals (Sweden)

    Teresa Abramowicz-Gerigk

    2015-09-01

    Full Text Available The documentation of human factor influence on the scenario development in maritime accidents compared with expert methods is commonly used as a basis in the process of setting up safety regulations and instructions. The new accidents and near misses show the necessity for further studies in determining the human factor influence on both risk acceptance criteria and development of risk control options for the manoeuvers in restricted waters. The paper presents the model of human error probability proposed for the assessment of ship masters and marine pilots' error decision and its influence on the risk of port manoeuvres.

  15. Human factors evaluation of the engineering test reactor control room

    International Nuclear Information System (INIS)

    Banks, W.W.; Boone, M.P.

    1981-03-01

    The Reactor and Process Control Rooms at the Engineering Test Reactor were evaluated by a team of human factors engineers using available human factors design criteria. During the evaluation, ETR, equipment and facilities were compared with MIL-STD-1472-B, Human Engineering design Criteria for Military Systems. The focus of recommendations centered on: (a) displays and controls; placing displays and controls in functional groups; (b) establishing a consistent color coding (in compliance with a standard if possible); (c) systematizing annunciator alarms and reducing their number; (d) organizing equipment in functional groups; and (e) modifying labeling and lines of demarcation

  16. The productivity from a human perspective: Dimensions and factors

    Directory of Open Access Journals (Sweden)

    Mirza Marvel Cequea

    2011-11-01

    Full Text Available Purpose: The purpose of this paper is to review the literature, for both theoretical foundations and empirical research, in order to establish relationships between the variables related to human factors and their impact on productivity.Design/methodology/approach: The strategy employed corresponds to a descriptive non-experimental design, which is the establishment of three criteria for the literature review, in order to narrow down the topic to research works relating productivity with the human factor. This was investigated in databases and journals dealing with related topics, in addition to consulting doctoral theses and published books concerning the influence of human factors on productivity. About 250 papers which were considered the most relevant for the research were selected.Findings:  As a result of this exploration the classification of the factors in two dimensions that are manifested in people when they act in organizations was highlighted: the psychological and the psychosocial dimension. Human factors included in these dimensions are: individual factors (motivation, skills, job satisfaction, identification, commitment and involvement with the organization, group factors (participation, cohesion and management conflict and organizational factors (organizational culture, organizational climate and leadership. All these factors have an impact on the productivity of the organization and are addressed in this research.Originality/value: The selected variables were used to formulate a model that incorporates the human factors identified and considers the phenomenon in a comprehensive manner. It will be addressed through multivariate analysis, with the possible application of structural equations in order to assess the causal relationships that may exist between factors and productivity.

  17. Human Aspect as a Critical Factor for Organization Sustainability in the Tourism Industry

    Directory of Open Access Journals (Sweden)

    Mehmet Ulus

    2016-03-01

    Full Text Available Organizations adopt diverse strategies to govern the technical and managerial aspects of sustainability implementation processes. The need for better leading and managing people-related issues emerges as companies aim for more effective change towards sustainability. The human aspect of the sustainability implementation process is mostly not paid enough attention, but it can significantly affect the success of a change management program by creating hurdles or easing the process. This study considers three human-related factors: resistance to change, internal communication, and employee engagement in sustainability activities of organizations. The aim of the study is to explore how these human factors are managed by tourism companies for organizational sustainability. For this purpose four companies from different sectors of tourism are chosen as case studies and the results are examined using qualitative data analysis techniques. The results indicate that the companies which are in a more advanced stage of sustainability implementation manage human factors using a greater number of channels and employ varied strategies. The results can provide insights into how organizations tackle the challenges of managing human aspect and display the practices that contribute to successful change management programs for achieving organizational sustainability through people.

  18. Fragile Balance: Human Mediums and Technical Media in Oliver Lodges Presidential Address of 1891

    Directory of Open Access Journals (Sweden)

    Erhard Schuettpelz, Ehler Voss

    2015-09-01

    Full Text Available In this paper we discuss the work of the Victorian physicist and radio pioneer Oliver Lodge (1851–1940 in the context of what we call the mediumistic trial of the long 19th century. We are focusing on a short moment in the early 1890s when Lodge’s radio experiments were part of a common expansion into physical and psychical research. By rigorously applying David Bloors heuristic "principle of symmetry", we demonstrate how Oliver Lodge lived in a world of systems-building and Empire-building that enabled him to categorize human mediums, electromagnetic entities and technical media as parts of an indeterminate but unified field of experimental settings. Though this historical moment was to become a unique tipping point in the initial convergence and later divergence of physical and psychical research, it reveals some general aspects of the mediumistic trial in the long 19th century, namely the existence of a common interface between religious and secularist positions and aspirations.

  19. In vivo assessment of the human cerebral microcirculation and its glycocalyx: A technical report.

    Science.gov (United States)

    Haeren, R H L; Rijkers, K; Schijns, O E M G; Dings, J; Hoogland, G; van Zandvoort, M A M J; Vink, H; van Overbeeke, J J

    2018-06-01

    The cerebral microcirculation and its glycocalyx, a matrix coating the luminal endothelium, are key regulators of capillary permeability and cerebral blood flow. Microvascular abnormalities are described in several neurological disorders. However, assessment of the cerebral microcirculation and glycocalyx has mainly been performed ex vivo. Here, the technical feasibility of in vivo assessment of the human cerebral microcirculation and its glycocalyx using sidestream dark field (SDF) imaging is discussed. Intraoperative assessment requires the application of a sterile drape covering the camera (slipcover). First, sublingual measurements with and without slipcover were performed in a healthy control to assess the impact of this slipcover. Subsequently, using SDF imaging, the sublingual (reference), cortical, and hippocampal microcirculation and glycocalyx were evaluated in patients who underwent resective brain surgery as treatment for drug-resistant temporal lobe epilepsy. Finally, vessel density, and the perfused boundary region (PBR), a validated gauge of glycocalyx health, were calculated using GlycoCheck © software. The addition of a slipcover affects vessel density and PBR values in a control subject. The cerebral measurements in five patients were more difficult to obtain than the sublingual ones. This was probably at least partly due to the introduction of a sterile slipcover. Results on vessel density and PBR showed similar patterns at all three measurement sites. This is the first report on in vivo assessment of the human cerebrovascular glycocalyx. Assessment of the glycocalyx is an additional application of in vivo imaging of the cerebral microcirculation using SDF technique. This method enables functional analysis of the microcirculation and glycocalyx, however the addition of a sterile slipcover affects the measurements. SDF imaging is a safe, quick, and straightforward technique to evaluate the functional cerebral microcirculation and glycocalyx

  20. Assessment factors for human health risk assessment: A discussion paper

    NARCIS (Netherlands)

    Vermeire, T.; Stevenson, H.; Pieters, M.N.; Rennen, M.; Slob, W.; Hakkert, B.C.

    1999-01-01

    The general goal of this discussion paper is to contribute toward the further harmonization of human health risk assessment. It first discusses the development of a formal, harmonized set of assessment factors. The status quo with regard to assessment factors is reviewed, that is, the type of

  1. Assessment factors for human health risk assessment: a discussion paper

    NARCIS (Netherlands)

    Vermeire TG; Stevenson H; Pieters MN; Rennen M; Slob W; Hakkert BC; Nederlandse organisatie voor; CSR; LEO; TNO-ITV

    1998-01-01

    The general goal of this discussion paper is to contribute towards further harmonisation of the human health risk assessment. It discusses the development of a formal, harmonised set of default assessment factors. The status quo with regard to assessment factors is reviewed. Options are presented

  2. Human Factors Engineering and Ergonomics Analysis for the Canister Storage Building (CSB) Results and Findings

    Energy Technology Data Exchange (ETDEWEB)

    GARVIN, L.J.

    1999-09-20

    The purpose for this supplemental report is to follow-up and update the information in SNF-3907, Human Factors Engineering (HFE) Analysis: Results and Findings. This supplemental report responds to applicable U.S. Department of Energy Safety Analysis Report review team comments and questions. This Human Factors Engineering and Ergonomics (HFE/Erg) analysis was conducted from April 1999 to July 1999; SNF-3907 was based on analyses accomplished in October 1998. The HFE/Erg findings presented in this report and SNF-3907, along with the results of HNF-3553, Spent Nuclear Fuel Project, Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report,'' Chapter A3.0, ''Hazards and Accidents Analyses,'' provide the technical basis for preparing or updating HNF-3553. Annex A, Chaptex A13.0, ''Human Factors Engineering.'' The findings presented in this report allow the HNF-3553 Chapter 13.0, ''Human Factors,'' to respond fully to the HFE requirements established in DOE Order 5480.23, Nuclear Safety Analysis Reports.

  3. Human Factors Engineering and Ergonomics Analysis for the Canister Storage Building (CSB) Results and Findings

    International Nuclear Information System (INIS)

    GARVIN, L.J.

    1999-01-01

    The purpose for this supplemental report is to follow-up and update the information in SNF-3907, Human Factors Engineering (HFE) Analysis: Results and Findings. This supplemental report responds to applicable U.S. Department of Energy Safety Analysis Report review team comments and questions. This Human Factors Engineering and Ergonomics (HFE/Erg) analysis was conducted from April 1999 to July 1999; SNF-3907 was based on analyses accomplished in October 1998. The HFE/Erg findings presented in this report and SNF-3907, along with the results of HNF-3553, Spent Nuclear Fuel Project, Final Safety Analysis Report. Annex A, ''Canister Storage Building Final Safety Analysis Report,'' Chapter A3.0, ''Hazards and Accidents Analyses,'' provide the technical basis for preparing or updating HNF-3553, Annex A, Chapter A13.0, ''Human Factors Engineering.'' The findings presented in this report allow the HNF-3553 Chapter 13.0, ''Human Factors,'' to respond fully to the HFE requirements established in DOE Order 5480.23, Nuclear Safety Analysis Reports

  4. A HUMAN FACTORS META MODEL FOR U.S. NUCLEAR POWER PLANT CONTROL ROOM MODERNIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Joe, Jeffrey C.

    2017-03-01

    Over the last several years, the United States (U.S.) Department of Energy (DOE) has sponsored human factors research and development (R&D) and human factors engineering (HFE) activities through its Light Water Reactor Sustainability (LWRS) program to modernize the main control rooms (MCR) of commercial nuclear power plants (NPP). Idaho National Laboratory (INL), in partnership with numerous commercial nuclear utilities, has conducted some of this R&D to enable the life extension of NPPs (i.e., provide the technical basis for the long-term reliability, productivity, safety, and security of U.S. NPPs). From these activities performed to date, a human factors meta model for U.S. NPP control room modernization can now be formulated. This paper discusses this emergent HFE meta model for NPP control room modernization, with the goal of providing an integrated high level roadmap and guidance on how to perform human factors R&D and HFE for those in the U.S. nuclear industry that are engaging in the process of upgrading their MCRs.

  5. Human Factors Engineering and Ergonomics Analysis for the Canister Storage Building (CSB): Results and Findings

    International Nuclear Information System (INIS)

    GARVIN, L.J.

    1999-01-01

    The purpose for this supplemental report is to follow-up and update the information in SNF-3907, Human Factors Engineering (HFE) Analysis: Results and Findings. This supplemental report responds to applicable U.S. Department of Energy Safety Analysis Report review team comments and questions. This Human Factors Engineering and Ergonomics (HFE/Erg) analysis was conducted from April 1999 to July 1999; SNF-3907 was based on analyses accomplished in October 1998. The HFE/Erg findings presented in this report and SNF-3907, along with the results of HNF-3553, Spent Nuclear Fuel Project, Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report,'' Chapter A3.0, ''Hazards and Accidents Analyses,'' provide the technical basis for preparing or updating HNF-3553. Annex A, Chaptex A13.0, ''Human Factors Engineering.'' The findings presented in this report allow the HNF-3553 Chapter 13.0, ''Human Factors,'' to respond fully to the HFE requirements established in DOE Order 5480.23, Nuclear Safety Analysis Reports

  6. Kinetics of the Factor XIa catalyzed activation of human blood coagulation Factor IX

    International Nuclear Information System (INIS)

    Walsh, P.N.; Bradford, H.; Sinha, D.; Piperno, J.R.; Tuszynski, G.P.

    1984-01-01

    The kinetics of activation of human Factor IX by human Factor XIa was studied by measuring the release of a trichloroacetic acid-soluble tritium-labeled activation peptide from Factor IX. Initial rates of trichloroacetic acid-soluble 3 H-release were linear over 10-30 min of incubation of Factor IX (88 nM) with CaCl 2 (5 mM) and with pure (greater than 98%) Factor XIa (0.06-1.3 nM), which was prepared by incubating human Factor XI with bovine Factor XIIa. Release of 3 H preceded the appearance of Factor IXa activity, and the percentage of 3 H released remained constant when the mole fraction of 3 H-labeled and unlabeled Factor IX was varied and the total Factor IX concentration remained constant. A linear correlation (r greater than 0.98, P less than 0.001) was observed between initial rates of 3 H-release and the concentration of Factor XIa, measured by chromogenic assay and by radioimmunoassay and added at a Factor IX:Factor XIa molar ratio of 70-5,600. Kinetic parameters, determined by Lineweaver-Burk analysis, include K/sub m/ (0.49 microM) of about five- to sixfold higher than the plasma Factor IX concentration, which could therefore regulate the reaction. The catalytic constant (k/sub cat/) (7.7/s) is approximately 20-50 times higher than that reported by Zur and Nemerson for Factor IX activation by Factor VIIa plus tissue factor. Therefore, depending on the relative amounts of Factor XIa and Factor VIIa generated in vivo and other factors which may influence reaction rates, these kinetic parameters provide part of the information required for assessing the relative contributions of the intrinsic and extrinsic pathways to Factor IX activation, and suggest that the Factor XIa catalyzed reaction is physiologically significant

  7. Production and properties of monoclonal antibodies to human blood coagulation factor VII and factor VIIa

    International Nuclear Information System (INIS)

    Mann, P.; Nesbitt, J.A.; Ge, M.; Kisiel, W.

    1986-01-01

    Human factor VII is a trace vitamin K-dependent protein that circulates in blood as a single-chain precursor to a serine protease. Upon activation, two-chain factor VIIa activates factor x in the presence of tissue factor and calcium. Purified preparations of single-chain (SC) human factor VII and two-chain (TC) factor VIIa were utilized to immunize Balb/c mice. Spleen cells from these immunized mice were fused to a non-secreting NS-1 derivative of X63-Ag8 myeloma cells and grown in selective medium. Analysis of culture supernatants by EIA revealed several hybridomas that were secreting IgG specific for Sc-factor VII and TC-factor VIIa. In addition, several hybridomas secreted IgG that reacted equally well with factor VII and factor VIIa. One of the latter McAb (A-29) reacted with the heavy chain of factor VIIa and the intact factor VII molecule equally as judged by Western blotting. A-29 was produced in ascites fluid, purified and coupled to activated CH-Sepharose. Application of one liter of normal human plasma to 10 ml of this immunoadsorbent column, elution of factor VII and subsequent Western blot using 125 I-rabbit anti-human factor VII indicated a single species of factor VII(M/sub r/ = 50 KDa) in normal plasma. These specific factor VII/VIIa McAbs may prove useful in the analysis of these factors, and in the separation of SC-factor VII from TC-factor VIIa

  8. Taking account of human factors in control-room design

    International Nuclear Information System (INIS)

    Dien, Y.; Montmayeul, R.

    1995-07-01

    Since the Three Mile Island accident two ways for improving the Human-Machine Interface have mainly been followed: the development of computerized operator aids in existing control-rooms and the design of advanced control-rooms. Insufficient attention paid to human factors in the design of operator aids has generally led to these aids being neglected or unused by their potential users. While for the design of advanced control-rooms efforts have been made for dealing with human factors in more extensive way. Based upon this experience, a general method for taking account of human factors in a control-room design has been devised and is described in this paper. (author)

  9. Human factors review of power plant maintainability. Final report

    International Nuclear Information System (INIS)

    Seminara, J.L.; Parsons, S.O.

    1981-02-01

    Human factors engineering is an interdisciplinary science and technology concerned with shaping the design of machines, facilities, and operational environments to promote safe, efficient, and reliable performance on the part of operators and maintainers of equipment systems. The human factors aspects of five nuclear power plants and four fossil fuel plants were evaluated using such methods as a check list guided observation system, structured interviews with maintenance personnel, direct observation of maintenance tasks, reviews of procedures, and analyses of maintenance errors or accidents by means of the critical incident technique. The study revealed a wide variety of human factors problem areas, most of which are extensively photodocumented. The study recommends that a more systematic and formal approach to ensure that future power plants are human engineered to the needs of maintenance personnel

  10. Factors increasing the risk of inactivity among administrative, technical, and manual workers in Warszawa public institutions.

    Science.gov (United States)

    Biernat, Elżbieta

    2015-01-01

    The research aims to assess the level of physical activity among administrative, technical, and manual workers employed in Warszawa public institutions and to analyze the factors that increase the risk of failing to meet World Health Organization (WHO) recommendations. The study comprised 373 employees of randomly selected institutions. A short version of International Physical Activity Questionnaire (IPAQ) was applied. The correlation between the mean values of duration, days, MET-min/week of efforts, gender, and type of work was analyzed using the Tukey's honest significant difference (HSD) test, while the correlation between the level of physical activity and the socio-demographic characteristics was assessed with the Chi2 test. The strength of the relationship between socio-demographic characteristics and fulfilment of WHO standards was expressed by the odds ratio (OR) and 95% confidence interval (95% CI). The significance level was p = 0.05. High levels of physical activity were declared by 41.8% of the manual workers, 14.7% of the administration staff, and 7.3% of the technicians; 19%, 31.5% and 54.5%, respectively, reported low levels of physical activity. Factors determining the fulfilment of the WHO recommendations include: the nature of work (p = 0.003), education (p = 0.004), and income (p = 0.003). The risk of being inactive nearly doubles in the case of administration staff (31.5%) and increases more than 4 times in the case of technicians (54.5%). Respondents with secondary school education (31.6%) are exposed to a 3-fold higher risk of inactivity, while in respondents with higher education (37.2%), the level of the risk is 4-fold higher. Compared to those in the highest income group (23.4%), people who earn less (34.1%) are inactive almost twice as often. Urgent intervention is necessary in all studied groups: increased energy expenditure for recreation and locomotion, educational offers of employers to promote healthy lifestyle, management of

  11. Cytokines and Growth Factors Expressed by Human Cutaneous Melanoma

    Energy Technology Data Exchange (ETDEWEB)

    Elias, Elias G., E-mail: george.elias@medstar.net; Hasskamp, Joanne H.; Sharma, Bhuvnesh K. [Maryland Melanoma Center, Weinberg Cancer Institute, Franklin Square Hospital Center, Baltimore, MD (United States)

    2010-05-07

    Cytokines and growth factors have biologic effects that could stimulate tumor growth, invasion and angiogenesis. The incidence of 24 factors was investigated in 25 cultured human melanoma cell lines and in 62 fixed tissues at different stages of the disease. Over 80% of the human melanoma cell lines expressed TGF-β, IL-8, IL-6, VEGF, PDGF-AA and OPN. Significantly higher TGF-β, IGF-1 and IL-15 were determined in primary lesions compared to distant metastases by immunohistochemistry. Illustrating the complexity of the milieu of the tumor microenvironment, some of these factors may have to be considered in targeted therapy.

  12. Cytokines and Growth Factors Expressed by Human Cutaneous Melanoma

    Directory of Open Access Journals (Sweden)

    Elias G. Elias

    2010-05-01

    Full Text Available Cytokines and growth factors have biologic effects that could stimulate tumor growth, invasion and angiogenesis. The incidence of 24 factors was investigated in 25 cultured human melanoma cell lines and in 62 fixed tissues at different stages of the disease. Over 80% of the human melanoma cell lines expressed TGF-β, IL-8, IL-6, VEGF, PDGF-AA and OPN. Significantly higher TGF-β, IGF-1 and IL-15 were determined in primary lesions compared to distant metastases by immunohistochemistry. Illustrating the complexity of the milieu of the tumor microenvironment, some of these factors may have to be considered in targeted therapy.

  13. Human Factors evaluation of LCS 254 and 255

    International Nuclear Information System (INIS)

    Goffe, L.; Held, J.E.

    1993-01-01

    This report includes the results of the Human Factors evaluation of the local control stations (LCS) 254 and 255 performed by Savannah River Technology Center (SRTC) Human Factors. Recommendations are included in order that the panel designs will be upgraded to comply with human engineering design guidelines. Figures 1 and 2 are included as examples of recommended changes. Also, consideration was given to including the proposed engineering changes which are currently on-going for LCS 255. Appendix A identifies the human engineering requirements from NUREG-0700 which were used in the evaluation process, and the areas of the design which do not comply with the guidelines. Those areas of the panel design which fail to comply with the human engineering guidelines are label location, label content, location aids, panel layout, and control display integration. Each of these design deficiencies and proposed corrections are described in this report

  14. Human factors: A major issue in plant aging

    International Nuclear Information System (INIS)

    Widrig, R.D.

    1985-01-01

    Humans play a significant role in the effects of aging on safe and reliable operation of nuclear power plants. These human issues may be more important than the issues of materials and component degradation with age. Human actions can accelerate or decelerate physical aging of a plant. And an aging plant can have a significant negative impact on staff quality and performance. The purpose of this paper is to provide some insights into the nature of these human factors issues and their relationship to plant aging. An early awareness of these issues facilitates timely action to at least mitigate these problems before they become insurmountable

  15. Periodic tests: a human factors analysis of documentary aspects

    International Nuclear Information System (INIS)

    Perinet, Romuald; Rousseau, Jean-Marie

    2007-01-01

    conclusions of this analysis are presented in this paper. The analysis carried out by the IRSN showed that the complexity of the design and implementation process of periodic tests is due to the diversity of.the organizations and participants, the number and the heterogeneity of the documents, and the technical and regulatory complexity of operation. In this context, defects related to the quality of the national reference document updates and to the conditions of their delivery were at the origin of difficulties in CNPEs. These difficulties address the integration of the updates by the participants, the overall vision of the rules to be respected, and the management of the workload to deal with these tasks. The analysis showed that CNPEs made efforts to produce reliable, station-specific updates, but improvements could still be made concerning the organization, the communication and the ergonomics of the operating ranges. More generally, from a human and organizational factors point of view, such an analysis surpasses the search for responsibility for the dysfunctions and allows for a more objective explanation of the encountered difficulties (inapplicable rules, delays of delivery, etc.). It also leads to a consolidated needs analysis in order to improve the global process. On the basis of a preliminary analysis, EDF has identified a plan for improvement. EDF has decided to deal with the improvement of the process within the framework of a thorough study. (authors)

  16. Transferring aviation human factors technology to the nuclear power industry

    International Nuclear Information System (INIS)

    Montemerlo, M.D.

    1981-01-01

    The purpose of this paper is to demonstrate the availability of aviation safety technology and research on problems which are sufficiently similar to those faced by the nuclear power industry that an agressive effort to adapt and transfer that technology and research is warranted. Because of time and space constraints, the scope of this paper is reduced from a discussion of all of aviation safety technology to the human factors of air carrier safety. This area was selected not only because of similarities in the human factors challenges shared by both industries (e.g. selection, training, evaluation, certification, etc.) but because experience in aviation has clearly demonstrated that human error contributes to a substantially greater proportion of accidents and incidents than does equipment failure. The Congress of the United States has placed a great deal of emphasis on investigating and solving human factors problems in aviation. A number of recent examples of this interest and of the resulting actions are described. The opinions of prominent aviation organizations as to the human factors problems most in need of research are presented, along with indications of where technology transfer to the nuclear power industry may be viable. The areas covered include: fatigue, crew size, information transfer, resource management, safety data-bases, the role of automation, voice and data recording systems, crew distractions, the management of safety regulatory agencies, equipment recertification, team training, crew work-load, behavioural factors, human factors of equipment design, medical problems, toxicological factors, the use of simulators for training and certification, determining the causes of human errors, the politics of systems improvement, and importance of both safety and public perception of safety if the industry is to be viable. (author)

  17. The human factor and organization to support nuclear power plant operators

    International Nuclear Information System (INIS)

    Naumov, V.I.

    1993-01-01

    Analysis reveals three basic factors which affect the safety of nuclear power reactors: (1) Internal physical properties of the reactor which provide self protection under breakdown and accident conditions; (2) The reliability of technical systems which provide monitoring, control, accident prevention, heat release, and localization of hazardous products during accidents; (3) Reliability of the reactor control personnel. The last of these factors is usually called the human factor. From published data, this factor makes a large contribution to the downtime and accident statistics at nuclear power plants: from 30 to 80% in various countries. Today the importance of the human factor in operating a nuclear power units is rather well recognized. Current ideas on how to increase the reliability of a human operator are reflected in IAEA recommendations and domestic official documents. The concept of 'a culture of safety' is introduced. Basic types of actions to increase the reliability of personnel who control a nuclear reactor are discussed, including: (1) The qualifying and psychological selection and the training of candidates on the operator's obligations. (2) The automation of routine operations which do not require the operator's intellect. (3) Perfecting the work place, information input to the operator, and the organization of the controls

  18. Factors That Influence Technical Efficiency of Sorghum Production: A Case of Small Holder Sorghum Producers in Lower Eastern Kenya

    Directory of Open Access Journals (Sweden)

    Evaline Chepng’etich

    2015-01-01

    Full Text Available Majority of the rural households in Kenya depend on agriculture as a source of food and livelihood. Agricultural productivity has been declining due to many factors resulting in increased food insecurity in the country. Consequently, there is a renewed interest in promoting drought-tolerant crops such as sorghum which thrives in the arid and semiarid lands of the developing world. However, performance of sorghum production among the smallholder farmers has still remained low. This study was thus carried out to identify factors that influence technical efficiency of sorghum production among smallholder farmers in Machakos and Makindu districts of the lower eastern Kenya. Collected data on farm and farmer characteristics were analysed by use of descriptive statistics and Tobit model. Result highlights show that technical efficiency was influenced positively by formal education level of the household, experience in sorghum farming, membership in farmers associations, use of hired labour, production advice, and use of manure. Surprisingly household size, meant to enhance labour, had a negative influence. To increase technical efficiency, efforts should focus on improving information flows on agronomic practices. Farmers should also be encouraged to form and actively participate in various farmers associations, which enhance learning and pooling of labour resources, hence improving technical efficiency.

  19. Effectiveness of human factors simulator; Eficiencia del simulador de factores humanos

    Energy Technology Data Exchange (ETDEWEB)

    Moragas, F.

    2015-07-01

    En 2011, ANAV started the exploitation of the Human Factors Simulator installed in TECNATOM Training Center located in L'Hospital de L'Infant Tarragona. AVAN's Strategic Plan includes the Action Plan for the improvement of human behavior. The plan includes improving the efficiency of the efficiency of the human factors simulator. It is proposed to improve the efficiency into two different terms: winning effectiveness in modeling behaviors, and interweaving the activities in the simulator with the actual strategy of promoting Safety culture and human behaviour. (Author)

  20. Determinant Factors of Technical-Tactical Combinations Frequency in standing position during Womens World Senior Championships 2009

    Directory of Open Access Journals (Sweden)

    David Eduardo López González

    2011-03-01

    Full Text Available Abstract Objective. To classify the perfomance  of world class women wrestlers as the frequency and characteristics of their Technical-Tactical Combinations (TTC with effectiveness in the standing position during the most important competition on the international calendar 2009.Methods.  In the TTC were characterized all standing position effectives by a sample of 70 wrestlers, occupants of the top 10 in each of the 7 weight categories convened. Descriptive variables were used 5 of effectiveness, technical group, and characteristics of its phases. Variables were obtained determining the effectiveness, measured the "success rate" achieved by each fighter, all through factor analysis. Later wrestlers were classified by cluster analysis by Ward's method.Results. The most important factor related to get a medal  was the execution of legs attacks of with several possible endings started with almost no contact with the opponent, followed by the use of low-risk attacks launched from a firm grip. The wrestlers opted mostly for defense and counter low risk. Most of the competitors who had good results using several and alternative projections also managed to end their attacks.Conclusions. Characterization Model used and the factors of effectiveness in the fight standing obtained provided detailed explanations of the performance characteristics of the best wrestlers in the Senior World Championships 2009. The design of this research can be applied year after year in both freestyle and women's.Key words: Technical - Tactical Combinations, Rules, Fighting Women, Factor Analysis and Effectiveness

  1. Determinant Factors of Technical-Tactical Combinations Frequency in standing position during Womens World Senior Championships 2009

    Directory of Open Access Journals (Sweden)

    David Eduardo López González

    2011-03-01

    Full Text Available Abstract  Objective. To classify the perfomance  of world class women wrestlers as the frequency and characteristics of their Technical-Tactical Combinations (TTC with effectiveness in the standing position during the most important competition on the international calendar 2009. Methods.  In the TTC were characterized all standing position effectives by a sample of 70 wrestlers, occupants of the top 10 in each of the 7 weight categories convened. Descriptive variables were used 5 of effectiveness, technical group, and characteristics of its phases. Variables were obtained determining the effectiveness, measured the "success rate" achieved by each fighter, all through factor analysis. Later wrestlers were classified by cluster analysis by Ward's method. Results. The most important factor related to get a medal  was the execution of legs attacks of with several possible endings started with almost no contact with the opponent, followed by the use of low-risk attacks launched from a firm grip. The wrestlers opted mostly for defense and counter low risk. Most of the competitors who had good results using several and alternative projections also managed to end their attacks. Conclusions. Characterization Model used and the factors of effectiveness in the fight standing obtained provided detailed explanations of the performance characteristics of the best wrestlers in the Senior World Championships 2009. The design of this research can be applied year after year in both freestyle and women's. Key words: Technical - Tactical Combinations, Rules, Fighting Women, Factor Analysis and Effectiveness

  2. The importance of the human factor in a physical protection system

    International Nuclear Information System (INIS)

    Silva, A.; Rocha, A.

    2002-01-01

    Full text: A complete physical protection system gathers three elements: equipment's, guards and procedures. The integration of these three elements will guarantee the efficiency of the overall PPS in such a way that it can meet the objectives that were defined during its project: clear and precise procedures will rule the relation between the technical factor (equipments/ hardware and software) and the human factor (guards). The technical factor is easily adapted ad upgraded to continue meet the objectives of the PPS; however, the human factor presents some resistance, internal and external, concerning the performance of its function within the overall PPS. The objective of this paper is to show the importance of the human factor as an integrant part of the PPS of a nuclear facility. 1. Good relationship between guards and other employees in a facility; 2. the knowledge and acceptance of rules and procedures; 3. and the awareness of the needing to implement security measures, as well as the cooperation with these measures to avoid unauthorized nuclear material removal from the facility or sabotage with consequent radioactive release will guarantee the success of the human factor within the overall PPS. In countries where there is no recent record of terrorist activities, as in Brazil's case, these three key factors are particularly critical, once the concept of security culture is not present in those people's way of life. The target public of this survey are the employees, including the guards of the security force, of the CNAAA - Central Nuclear Almirante Alvaro Alberto - consisting of Angra 1 and Angra 2 nuclear power plants. The tools used to came up with the conclusions of this work were two different kinds of questionnaires: a) one of the questionnaires was answered by the guards of the security force concerning their feelings or impressions about other employees' knowledge, acceptance and cooperation of/with the security measures applied on site, and their

  3. New usable technical specifications

    International Nuclear Information System (INIS)

    Webster, S.A.; Tomasi, L.T.; Bernier, R.A.

    1989-01-01

    After 2 yr of preparation, 1988 finally saw the nuclear industry writing operator-oriented technical specifications. This effort is a continuation of previous efforts to develop improved and usable standard technical specifications (STSs), and is being conducted by the four nuclear steam supply system vendor owners' groups under the auspices of the Nuclear Management Resources Council. Each participant is currently preparing a set of improved STSs based on a writer's guide that was developed through a combined industry effort. In May of 1987, a Human Factors Improvements to Technical Specifications (HFITS) task group was formed to prepare a writer's guide for improved, industrywide STSs. This task group was composed of two representatives from each owners' group, one with a human factors background and one with some operations background. Two documents were prepared in 6 months, a human factors report laying the groundwork for the considerations to go into technical specifications and a writer's guide for their preparation. This paper reports on the application of this writer's guide to the writing of improved STS

  4. Socio-technicality, Human Work Interaction Design (HWID), and Work Engagement

    DEFF Research Database (Denmark)

    Clemmensen, Torkil; Campos, Pedro; Abdelnour-Nocera, José

    the sociotechnical tradition, however, tells us that looking at work engagement only or mainly from a technical design side is the wrong way to go; instead the social and the technical need to be considered on an equal footing. We give the theoretical motivation and background in sociotechnical thinking for our...

  5. Incorporating Human Factors into design change processes - a regulator's perspective

    International Nuclear Information System (INIS)

    Staples, L.; McRobbie, H.

    2003-01-01

    Nuclear power plants in Canada must receive written approval from the Canadian Nuclear Safety Commission (CNSC) when making certain changes that are defined in their licenses. The CNSC expects the design change process to include a method for ensuring that the human-machine interface and workplace design support the safe and reliable performance of required tasks. When reviewing design changes for approval, the CNSC looks for evidence of analysis work, use of appropriate human factors design guide-lines, and verification and validation testing of the design. In addition to reviewing significant design changes, evaluations are conducted to ensure design change processes adequately address human performance. Findings from reviews and evaluations highlight the need to integrate human factors into the design change process, provide human factors training and support to engineering staff, establish processes to ensure coordination between the various groups with a vested interest in human factors, and develop more rigorous methods to validate changes to maintenance, field operations and testing interfaces. (author)

  6. Human factors reliability benchmark exercise, report of the SRD participation

    International Nuclear Information System (INIS)

    Waters, Trevor

    1988-01-01

    Within the scope of the Human Factors Reliability Benchmark Exercise, organised by the Joint Research Centre, Ispra, Italy, the Safety and Reliability Directorate (SRD) team has performed analysis of human factors in two different activities - a routine test and a non-routine operational transient. For both activities, an 'FMEA-like' task, potential errors, and the factors which affect performance. For analysis of the non-routine activity, which involved a significant amount of cognitive processing, such as diagnosis and decision making, a new approach for qualitative analysis has been developed. Modelling has been performed using both event trees and fault trees and examples are provided. Human error probabilities were estimated using the methods Absolute Probability Judgement (APJ), Human Cognitive Reliability Method (HCR), Human Error and Assessment and Reduction Technique (HEART), Success-Likelihood Index Method (SLIM), Technica Empiriza Stima Eurori Operatori (TESEO), and Technique for Human Error Rate Prediction (THERP). A discussion is provided of the lessons learnt in the course of the exercise and unresolved difficulties in the assessment of human reliability. (author)

  7. Interactive analysis of human error factors in NPP operation events

    International Nuclear Information System (INIS)

    Zhang Li; Zou Yanhua; Huang Weigang

    2010-01-01

    Interactive of human error factors in NPP operation events were introduced, and 645 WANO operation event reports from 1999 to 2008 were analyzed, among which 432 were found relative to human errors. After classifying these errors with the Root Causes or Causal Factors, and then applying SPSS for correlation analysis,we concluded: (1) Personnel work practices are restricted by many factors. Forming a good personnel work practices is a systematic work which need supports in many aspects. (2)Verbal communications,personnel work practices, man-machine interface and written procedures and documents play great roles. They are four interaction factors which often come in bundle. If some improvements need to be made on one of them,synchronous measures are also necessary for the others.(3) Management direction and decision process, which are related to management,have a significant interaction with personnel factors. (authors)

  8. Human factors assessment in PRA using task analysis linked evaluation technique (TALENT)

    International Nuclear Information System (INIS)

    Wells, J.E.; Banks, W.W.

    1990-01-01

    Human error is a primary contributor to risk in complex high-reliability systems. A 1985 U.S. Nuclear Regulatory Commission (USNRC) study of licensee event reports (LERs) suggests that upwards of 65% of commercial nuclear system failures involve human error. Since then, the USNRC has initiated research to fully and properly integrate human errors into the probabilistic risk assessment (PRA) process. The resulting implementation procedure is known as the Task Analysis Linked Evaluation Technique (TALENT). As indicated, TALENT is a broad-based method for integrating human factors expertise into the PRA process. This process achieves results which: (1) provide more realistic estimates of the impact of human performance on nuclear power safety, (2) can be fully audited, (3) provide a firm technical base for equipment-centered and personnel-centered retrofit/redesign of plants enabling them to meet internally and externally imposed safety standards, and (4) yield human and hardware data capable of supporting inquiries into human performance issues that transcend the individual plant. The TALENT procedure is being field-tested to verify its effectiveness and utility. The objectives of the field-test are to examine (1) the operability of the process, (2) its acceptability to the users, and (3) its usefulness for achieving measurable improvements in the credibility of the analysis. The field-test will provide the information needed to enhance the TALENT process

  9. Infrastructural and Human Factors Affecting Safety Outcomes of Cyclists

    Directory of Open Access Journals (Sweden)

    Sergio Useche

    2018-01-01

    Full Text Available The increasing number of registered road crashes involving cyclists during the last decade and the high proportion of road crashes resulting in severe injuries and fatalities among cyclists constitutes a global issue for community health, urban development and sustainability. Nowadays, the incidence of many risk factors for road crashes of cyclists remains largely unexplained. Given the importance of this issue, the present study has been conducted with the aim of determining relationships between infrastructural, human factors and safety outcomes of cyclists. Objectives: This study aimed, first, to examine the relationship between key infrastructural and human factors present in cycling, bicycle-user characteristics and their self-reported experience with road crashes. And second, to determine whether a set of key infrastructural and human factors may predict their self-reported road crashes. Methods: For this cross-sectional study, a total of 1064 cyclists (38.8% women, 61.2% men; M = 32.8 years of age from 20 different countries across Europe, South America and North America, participated in an online survey composed of four sections: demographic data and cycling-related factors, human factors, perceptions on infrastructural factors and road crashes suffered. Results: The results of this study showed significant associations between human factors, infrastructural conditions and self-reported road crashes. Also, a logistic regression model found that self-reported road crashes of cyclists could be predicted through variables such as age, riding intensity, risky behaviours and problematic user/infrastructure interactions. Conclusions: The results of this study suggest that self-reported road crashes of cyclists are influenced by features related to the user and their interaction with infrastructural characteristics of the road.

  10. Human factors engineering plan for reviewing nuclear plant modernization programs

    International Nuclear Information System (INIS)

    O'Hara, John; Higgins, James

    2004-12-01

    The Swedish Nuclear Power Inspectorate reviews the human factors engineering (HFE) aspects of nuclear power plants (NPPs) involved in the modernization of the plant systems and control rooms. The purpose of a HFE review is to help ensure personnel and public safety by verifying that accepted HFE practices and guidelines are incorporated into the program and nuclear power plant design. Such a review helps to ensure the HFE aspects of an NPP are developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The review addresses eleven HFE elements: HFE Program Management, Operating Experience Review, Functional Requirements Analysis and Allocation, Task Analysis, Staffing, Human Reliability Analysis, Human-System Interface Design, Procedure Development, Training Program Development, Human Factors Verification and Validation, and Design Implementation

  11. Human factors engineering plan for reviewing nuclear plant modernization programs

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, John; Higgins, James [Brookhaven National Laboratory, Upton, NY (United States)

    2004-12-01

    The Swedish Nuclear Power Inspectorate reviews the human factors engineering (HFE) aspects of nuclear power plants (NPPs) involved in the modernization of the plant systems and control rooms. The purpose of a HFE review is to help ensure personnel and public safety by verifying that accepted HFE practices and guidelines are incorporated into the program and nuclear power plant design. Such a review helps to ensure the HFE aspects of an NPP are developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The review addresses eleven HFE elements: HFE Program Management, Operating Experience Review, Functional Requirements Analysis and Allocation, Task Analysis, Staffing, Human Reliability Analysis, Human-System Interface Design, Procedure Development, Training Program Development, Human Factors Verification and Validation, and Design Implementation.

  12. Immunolocalization of transforming growth factor alpha in normal human tissues

    DEFF Research Database (Denmark)

    Christensen, M E; Poulsen, Steen Seier

    1996-01-01

    anchorage-independent growth of normal cells and was, therefore, considered as an "oncogenic" growth factor. Later, its immunohistochemical presence in normal human cells as well as its biological effects in normal human tissues have been demonstrated. The aim of the present investigation was to elucidate...... the distribution of the growth factor in a broad spectrum of normal human tissues. Indirect immunoenzymatic staining methods were used. The polypeptide was detected with a polyclonal as well as a monoclonal antibody. The polyclonal and monoclonal antibodies demonstrated almost identical immunoreactivity. TGF......-alpha was found to be widely distributed in cells of normal human tissues derived from all three germ layers, most often in differentiated cells. In epithelial cells, three different kinds of staining patterns were observed, either diffuse cytoplasmic, cytoplasmic in the basal parts of the cells, or distinctly...

  13. Meeting Human Reliability Requirements through Human Factors Design, Testing, and Modeling

    Energy Technology Data Exchange (ETDEWEB)

    R. L. Boring

    2007-06-01

    In the design of novel systems, it is important for the human factors engineer to work in parallel with the human reliability analyst to arrive at the safest achievable design that meets design team safety goals and certification or regulatory requirements. This paper introduces the System Development Safety Triptych, a checklist of considerations for the interplay of human factors and human reliability through design, testing, and modeling in product development. This paper also explores three phases of safe system development, corresponding to the conception, design, and implementation of a system.

  14. NASA Space Flight Human-System Standard Human Factors, Habitability, and Environmental Health

    Science.gov (United States)

    Holubec, Keith; Connolly, Janis

    2010-01-01

    This slide presentation reviews the history, and development of NASA-STD-3001, NASA Space Flight Human-System Standard Human Factors, Habitability, and Environmental Health, and the related Human Integration Design Handbook. Currently being developed from NASA-STD-3000, this project standard currently in review will be available in two volumes, (i.e., Volume 1 -- VCrew Health and Volume 2 -- Human Factors, Habitability, and Environmental Health) and the handbook will be both available as a pdf file and as a interactive website.

  15. Human factor engineering applied to nuclear power plant design

    International Nuclear Information System (INIS)

    Manrique, A.; Valdivia, J.C.; Jimenez, A.

    2001-01-01

    For the design and construction of new nuclear power plants as well as for maintenance and operation of the existing ones new man-machine interface designs and modifications are been produced. For these new designs Human Factor Engineering must be applied the same as for any other traditional engineering discipline. Advantages of implementing adequate Human Factor Engineering techniques in the design of nuclear reactors have become not only a fact recognized by the majority of engineers and operators but also an explicit requirement regulated and mandatory for the new designs of the so called advanced reactors. Additionally, the big saving achieved by a nuclear power plant having an operating methodology which significantly decreases the risk of operating errors makes it necessary and almost vital its implementation. The first step for this is preparing a plan to incorporate all the Human Factor Engineering principles and developing an integral design of the Instrumentation and Control and Man-machine interface systems. (author)

  16. Human Factors and Safety Culture in Maritime Safety (revised

    Directory of Open Access Journals (Sweden)

    Heinz Peter Berg

    2013-09-01

    Full Text Available As in every industry at risk, the human and organizational factors constitute the main stakes for maritime safety. Furthermore, several events at sea have been used to develop appropriate risk models. The investigation on maritime accidents is, nowadays, a very important tool to identify the problems related to human factor and can support accident prevention and the improvement of maritime safety. Part of this investigation should in future also be near misses. Operation of ships is full of regulations, instructions and guidelines also addressing human factors and safety culture to enhance safety. However, even though the roots of a safety culture have been established, there are still serious barriers to the breakthrough of the safety management. One of the most common deficiencies in the case of maritime transport is the respective monitoring and documentation usually lacking of adequacy and excellence. Nonetheless, the maritime area can be exemplified from other industries where activities are ongoing to foster and enhance safety culture.

  17. Human factors and fuzzy set theory for safety analysis

    International Nuclear Information System (INIS)

    Nishiwaki, Y.

    1987-01-01

    Human reliability and performance is affected by many factors: medical, physiological and psychological, etc. The uncertainty involved in human factors may not necessarily be probabilistic, but fuzzy. Therefore, it is important to develop a theory by which both the non-probabilistic uncertainties, or fuzziness, of human factors and the probabilistic properties of machines can be treated consistently. In reality, randomness and fuzziness are sometimes mixed. From the mathematical point of view, probabilistic measures may be considered a special case of fuzzy measures. Therefore, fuzzy set theory seems to be an effective tool for analysing man-machine systems. The concept 'failure possibility' based on fuzzy sets is suggested as an approach to safety analysis and fault diagnosis of a large complex system. Fuzzy measures and fuzzy integrals are introduced and their possible applications are also discussed. (author)

  18. The significance of human factors in nuclear activities

    International Nuclear Information System (INIS)

    Weil, L.; Berg, H.P.

    1999-01-01

    Human factors is an aspect increasingly investigated in the last few years in efforts and programmes for enhancing the operational safety of nuclear systems. Methodology has been elaborated for analysis and evaluation of human reliability, or development of instruments supporting the decisions to be taken by the operators at the man-control room interface of nuclear installations, as well as initial approaches to introduce organisational factors which may influence the man-machine function allocation, and thus are an element of the safety culture concept. The significance of human factors in nuclear activities, as well as activities at the national and international level for optimisation of the man-machine interface and the man-organisation interface are discussed. (orig./CB) [de

  19. Quality management in the nuclear industry: the human factor

    International Nuclear Information System (INIS)

    1990-01-01

    In the nuclear industry it is vital to understand the 'human factor' with regard to plant performance and plant safety. A proper management system ensures that personnel perform their duties correctly. 'Quality Management in the Nuclear Industry: the Human Factor', was a conference organized by the Institution of Mechanical Engineers in October 1990. The conference covered a wide range of topics on an international level including: standards, licensing and regulatory procedures; selection assessment and training of personnel; feedback from experience of good practice and of deviations; management and support of personnel performance; modelling and evaluation of human factors. The papers presented at the conference are contained in this volume. All twenty papers are indexed separately. (author)

  20. A human factors design of a nuclear plant analyzer

    Energy Technology Data Exchange (ETDEWEB)

    Byeon, Seung Nam; Lee, Dong Hoon; Park, Chan Woo [Kyounghee Univ., Seoul (Korea, Republic of)

    2000-12-15

    The project consists of four key stages as follows : based on the review of various literature, human factors design principles and processes are identified, the literature reviewed in the project includes NUREG-0700, research papers for MMI, human factors handbooks, and laboratory reports, after the design principles and processes are determined, a design checklist is developed to evaluate the user interface of NPA, the design checklist consists of seven different categories such as display screen, menu interface, form-fillin, alphanumeric characters, symbols, color, and highlighting, NPA was tested with the design checklist for conformance to the human factors design principles, the expert reviews are performed to evaluate a graphic user interface of NPA, the application of the design checklist and the subjective opinion of the expert identify the design included in the user interface of NPA, based on the thorough analysis of design defects, design guidelines are recommended to improve the user interface of NPA.

  1. A human factors design of a nuclear plant analyzer

    International Nuclear Information System (INIS)

    Byeon, Seung Nam; Lee, Dong Hoon; Park, Chan Woo

    2000-12-01

    The project consists of four key stages as follows : based on the review of various literature, human factors design principles and processes are identified, the literature reviewed in the project includes NUREG-0700, research papers for MMI, human factors handbooks, and laboratory reports, after the design principles and processes are determined, a design checklist is developed to evaluate the user interface of NPA, the design checklist consists of seven different categories such as display screen, menu interface, form-fillin, alphanumeric characters, symbols, color, and highlighting, NPA was tested with the design checklist for conformance to the human factors design principles, the expert reviews are performed to evaluate a graphic user interface of NPA, the application of the design checklist and the subjective opinion of the expert identify the design included in the user interface of NPA, based on the thorough analysis of design defects, design guidelines are recommended to improve the user interface of NPA

  2. Human Factors and Habitability Challenges for Mars Missions

    Science.gov (United States)

    Whitmore, Mihriban

    2015-01-01

    As NASA is planning to send humans deeper into space than ever before, adequate crew health and performance will be critical for mission success. Within the NASA Human Research Program (HRP), the Space Human Factors and Habitability (SHFH) team is responsible for characterizing the risks associated with human capabilities and limitations with respect to long-duration spaceflight, and for providing mitigations (e.g., guidelines, technologies, and tools) to promote safe, reliable and productive missions. SHFH research includes three domains: Advanced Environmental Health (AEH), Advanced Food Technology (AFT), and Space Human Factors Engineering (SHFE). The AEH portfolio focuses on understanding the risk of microbial contamination of the spacecraft and on the development of standards for exposure to potential toxins such as chemicals, bacteria, fungus, and lunar/Martian dust. The two risks that the environmental health project focuses on are adverse health effects due to changes in host-microbe interactions, and risks associated with exposure to dust in planetary surface habitats. This portfolio also proposes countermeasures to these risks by making recommendations that relate to requirements for environmental quality, foods, and crew health on spacecraft and space missions. The AFT portfolio focuses on reducing the mass, volume, and waste of the entire integrated food system to be used in exploration missions, and investigating processing methods to extend the shelf life of food items up to five years, while assuring that exploration crews will have nutritious and palatable foods. The portfolio also delivers improvements in both the food itself and the technologies for storing and preparing it. SHFE sponsors research to establish human factors and habitability standards and guidelines in five risk areas, and provides improved design concepts for advanced crew interfaces and habitability systems. These risk areas include: Incompatible vehicle/habitat design

  3. Human Health/Human Factors Considerations in Trans-Lunar Space

    Science.gov (United States)

    Moore, E. Cherice; Howard, Robert; Mendeck, Gavin

    2014-01-01

    The human factors insights of how they are incorporated into the vehicle are crucial towards designing and planning the internal designs necessary for future spacecraft and missions. The adjusted mission concept of supporting the Asteroid Redirect Crewed Mission will drive some human factors changes on how the Orion will be used and will be reassessed so as to best contribute to missions success. Recognizing what the human factors and health functional needs are early in the design process and how to integrate them will improve this and future generations of space vehicles to achieve mission success and continue to minimize risks.

  4. Education Factor and Human Resources Development - Albania Case

    OpenAIRE

    Sonila Berdo

    2010-01-01

    The article gives a general view of the actual situation and the potential importance that the education factor plays in the formation and development of human resources in Albania, based on the Albanian education system applied as well as the strategies undertaken regarding the development of human resources by transforming it in an important asset and an unstoppable source of values for all the society. In particular, the article is focused in analyzing and evaluating the link between the l...

  5. Electronic cigarettes: incorporating human factors engineering into risk assessments

    OpenAIRE

    Yang, Ling; Rudy, Susan F; Cheng, James M; Durmowicz, Elizabeth L

    2014-01-01

    Objective A systematic review was conducted to evaluate the impact of human factors (HF) on the risks associated with electronic cigarettes (e-cigarettes) and to identify research gaps. HF is the evaluation of human interactions with products and includes the analysis of user, environment and product complexity. Consideration of HF may mitigate known and potential hazards from the use and misuse of a consumer product, including e-cigarettes. Methods Five databases were searched through Januar...

  6. With eloquence and humanity? Human factors/ergonomics in sustainable human development.

    Science.gov (United States)

    Moore, Dave; Barnard, Tim

    2012-12-01

    This article is based on a keynote presentation given at the 18th Congress of the International Ergonomics Association in Recife, Brazil, February 2012. It considers new, and not so new, approaches and practical roles for the emerging field of human factors/ergonomics (HFE) in sustainable development (SD).The material for this article was largely drawn from the literature in the fields of human development, sustainability, climate change mitigation and adaptation, and social/environmental impact assessment. Identifying the role of HFE in SD is not a simple one and from the outset is complicated by the widely differing ideas in the sustainability literature about what exactly it is we are hoping to sustain. Is it individual companies, business models, cultures, or the carrying capacity of our planet? Or combinations of these? For the purposes of this article, certain assumptions are made, and various emerging opportunities and responsibilities associated with our changing world of work are introduced. First, there are new versions of traditional tasks for us, such as working with the people and companies in the renewable energy sectors. Beyond this, however, it is suggested that there are emerging roles for HFE professionals in transdisciplinary work where we might play our part, for example, in tackling the twinned issues of climate change and human development in areas of significant poverty. In particular we have the tools and capabilities to help define and measure what groups have reason to value, and wish to sustain. It is suggested, that to do this effectively, however, will require a philosophical shift, or perhaps just a philosophical restatement at a collective level, regarding who and what we ultimately serve.

  7. 77 FR 3500 - VTECH Communications, Inc., Human Factors Department, Beaverton, OR; Amended Certification...

    Science.gov (United States)

    2012-01-24

    ... firm should read VTech Communications, Inc., Human Factors Department, Beaverton, Oregon. New... Communications, Inc., Human Factors Department, Beaverton, Oregon. The intent of the Department's certification... workers from VTech Communications, Inc., Human Factors Department, Beaverton, Oregon, who became totally...

  8. Human factors guidelines for nuclear power plant applications

    International Nuclear Information System (INIS)

    Ketchel, J.

    1993-01-01

    In 1989, Waters et al. reported to the Human Factors Society on developing human factors criteria for a new reactor plant. They correctly indicated that much of the guidance documentation in human factors engineering has derived from MIL-STD-1472 and its antecedents. Guidelines for human-computer interface have sprung primarily from the Smith and Mosier compendium and its source documents. NUREG-0700, which is currently being updated, was developed by the US Nuclear Regulatory Commission (NRC) as a general evaluation guide for inspecting control rooms. In addition, the Electric Power Research Institute, Institute of Nuclear Power Operations, US Department of Energy, the NRC, and others have published a number of specialized documents on a range of subjects. The number of guidelines and standards has grown in the past few years to an impressive number, including those published by international organizations and professional societies. This paper provides an update on current efforts to provide appropriate guidance for the power industry and, perhaps more importantly, offers a perspective on how users should think about using the available materials and what else is needed. The Electric Power Research Institute (EPRI) continues to be one of the principal participants in providing guidance to the utilities. Human factors guidelines is indeed a timely topic, currently of great interest to EPRI's constituents and to designers of new and upgraded nuclear power plants (NPMs) in the Advanced Light Water Reactor and the Instrumentation and Control Upgrade Initiative programs

  9. Human factors questionnaire as a tool for risk assessment

    International Nuclear Information System (INIS)

    Santos, Isaac J.A.L.; Grecco, Claudio H.S.; Carvalho, Paulo V.R.; Mol, Antonio C.A.; Oliveira, Mauro V.; Augusto, Silas C.

    2009-01-01

    The human factors engineering (HFE) as a discipline, and as a process, seeks to discover and to apply knowledge about human capabilities and limitations to system and equipment design, ensuring that the system design, human tasks and work environment are compatible with the sensory, perceptual, cognitive and physical attributes of the personnel who operates systems and equipment. Risk significance considers the magnitude of the consequences (loss of life, material damage, environmental degradation) and the frequency of occurrence of a particular adverse event. The questionnaire design was based on the following definitions: the score and the classification of the nuclear safety risk. The principal benefit of applying an approach based on the risk significance in the development of the questionnaire is to ensure the identification and evaluation of the features of the projects, related to human factors, which affect the nuclear safety risk, the human actions and the safety of the nuclear plant systems. The human factors questionnaire developed in this study will provide valuable support for risk assessment, making possible the identification of design problems that can influence the evaluation of the nuclear safety risk. (author)

  10. Predisposition Factors of Career and Technical Education Transfer Students: A Hermeneutic Phenomenology Study

    Science.gov (United States)

    Hioki, Warren; Lester, Derek; Martinez, Mario

    2015-01-01

    Six college students, who were career and technical education (CTE) transfer students in the state of Nevada, were interviewed Spring Semester of 2009. The study used a hermeneutic phenomenology framework as the method to identify those predisposition variables that heavily influenced the students in their decision to transfer to a senior…

  11. Modelling risk in high hazard operations : Integrating technical, organisational and cultural factors

    NARCIS (Netherlands)

    Ale, B.J.M.; Hanea, D.M.; Sillem, S.; Lin, P.H.; Van Gulijk, C.; Hudson, P.T.W.

    2012-01-01

    Recent disasters in high hazard industries such as Oil and Gas Exploration (The Deepwater Horizon) and Petrochemical production (Texas City) have been found to have causes that range from direct technical failures through organizational shortcomings right up to weak regulation and inappropriate

  12. Interplay among Technical, Socio-Emotional and Personal Factors in Written Feedback Research

    Science.gov (United States)

    Chong, Ivan

    2018-01-01

    The centrality of written feedback is clearly seen from the proliferation of research in the context of higher education. As an increasingly expanding field in research, the majority of written feedback studies have been interested in investigating the technical aspect of how feedback should be given in order to promote student learning. More…

  13. Patient safety - the role of human factors and systems engineering.

    Science.gov (United States)

    Carayon, Pascale; Wood, Kenneth E

    2010-01-01

    Patient safety is a global challenge that requires knowledge and skills in multiple areas, including human factors and systems engineering. In this chapter, numerous conceptual approaches and methods for analyzing, preventing and mitigating medical errors are described. Given the complexity of healthcare work systems and processes, we emphasize the need for increasing partnerships between the health sciences and human factors and systems engineering to improve patient safety. Those partnerships will be able to develop and implement the system redesigns that are necessary to improve healthcare work systems and processes for patient safety.

  14. Patient Safety: The Role of Human Factors and Systems Engineering

    Science.gov (United States)

    Carayon, Pascale; Wood, Kenneth E.

    2011-01-01

    Patient safety is a global challenge that requires knowledge and skills in multiple areas, including human factors and systems engineering. In this chapter, numerous conceptual approaches and methods for analyzing, preventing and mitigating medical errors are described. Given the complexity of healthcare work systems and processes, we emphasize the need for increasing partnerships between the health sciences and human factors and systems engineering to improve patient safety. Those partnerships will be able to develop and implement the system redesigns that are necessary to improve healthcare work systems and processes for patient safety. PMID:20543237

  15. Human factors engineering evaluation of the UTR-10 Reactor

    International Nuclear Information System (INIS)

    Lahti, D.; Nilius, D.; Heithoff, D.; Roche, G.; Sage, S.

    1982-01-01

    This paper is a description of a student design team's review and evaluation of Iowa State University's University Test Reactor (UTR-10). The review was based on how well the control room of the UTR-10 measured up to selected portions of NUREG-0800, chapter 18, Human Factor Engineering/Standard Review Plan Development. The review was conducted by inspecting the reactor and interviewing reactor operators. The control room workspace, instrumentation controls and other equipment were evaluated from a human factors engineering point of view that takes into account both system demands and operator capabilities. Identification, assessment, and suggestion for control room design modifications that correct inadequate or unsuitable items was made

  16. A human factors data bank for French nuclear power plants

    International Nuclear Information System (INIS)

    Villemeur, A.; Mosneron-Dupin, F.; Bouissou, M.; Meslin, T.

    1986-01-01

    CONFUCIUS is a computerized data bank developed by Electricite de France to study human factors in nuclear power plants. A detailed and homogeneous grouping of described operation and maintenance errors as well as of performance times is possible with CONFUCIUS. It also incorporates a selection of statistical treatment softwares. Readily usable and modifiable, the system can easily evolve. It allows a wide range of applications (safety analysis, event analysis, training, human factors engineering, probabilistic analysis). Data derived from the analysis of significant events reported in power plants and from the analysis of simulator tests are used as inputs into this data bank

  17. Genetic and environmental factors in experimental and human cancer

    Energy Technology Data Exchange (ETDEWEB)

    Takayama, S.; Takebe, H.; Gelboin, H.V.; MaChahon, B.; Matsushima, T.; Sugimura, T.

    1980-01-01

    Recently technological advances in assaying mutagenic principles have revealed that there are many mutagens in the environment, some of which might be carcinogenic to human beings. Other advances in genetics have shown that genetic factors might play an important role in the induction of cancer in human beings, e.g., the high incidence of skin cancers in patients with xeroderma pigmentosum. These proceedings deal with the relationships between genetic and environmental factors in carcinogenesis. The contributors cover mixed-function oxidases, pharmacogenetics, twin studies, DNA repair, immunology, and epidemiology.

  18. Human factors evaluation of teletherapy: Literature review. Volume 5

    Energy Technology Data Exchange (ETDEWEB)

    Henriksen, K.; Kaye, R.D.; Jones, R. [Hughes Training, Inc., Falls Church, VA (United States); Morisseau, D.S.; Serig, D.L. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Systems Technology

    1995-07-01

    A series of human factors evaluations were undertaken to better understand the contributing factors to human error in the teletherapy environment. Teletherapy is a multidisciplinary methodology for treating cancerous tissue through selective exposure to an external beam of ionizing radiation. A team of human factors specialists, assisted by a panel of radiation oncologists, medical physicists, and radiation therapists, conducted site visits to radiation oncology departments at community hospitals, university centers, and free-standing clinics. A function and task analysis was performed initially to guide subsequent evaluations in the areas of workplace environment, system-user interfaces, procedures, training, and organizational practices. To further acquire an in-depth and up-to-date understanding of the practice of teletherapy in support of these evaluations, a systematic literature review was conducted. Factors that have a potential impact on the accuracy of treatment delivery were of primary concern. The present volume is the literature review. The volume starts with an overview of the multiphased nature of teletherapy, and then examines the requirement for precision, the increasing role of quality assurance, current conceptualizations of human error, and the role of system factors such as the workplace environment, user-system interfaces, procedures, training, and organizational practices.

  19. Human factors evaluation of teletherapy: Literature review. Volume 5

    International Nuclear Information System (INIS)

    Henriksen, K.; Kaye, R.D.; Jones, R.; Morisseau, D.S.; Serig, D.L.

    1995-07-01

    A series of human factors evaluations were undertaken to better understand the contributing factors to human error in the teletherapy environment. Teletherapy is a multidisciplinary methodology for treating cancerous tissue through selective exposure to an external beam of ionizing radiation. A team of human factors specialists, assisted by a panel of radiation oncologists, medical physicists, and radiation therapists, conducted site visits to radiation oncology departments at community hospitals, university centers, and free-standing clinics. A function and task analysis was performed initially to guide subsequent evaluations in the areas of workplace environment, system-user interfaces, procedures, training, and organizational practices. To further acquire an in-depth and up-to-date understanding of the practice of teletherapy in support of these evaluations, a systematic literature review was conducted. Factors that have a potential impact on the accuracy of treatment delivery were of primary concern. The present volume is the literature review. The volume starts with an overview of the multiphased nature of teletherapy, and then examines the requirement for precision, the increasing role of quality assurance, current conceptualizations of human error, and the role of system factors such as the workplace environment, user-system interfaces, procedures, training, and organizational practices

  20. Establishing a value chain for human factors in nuclear power plantcontrol room modernization

    Energy Technology Data Exchange (ETDEWEB)

    Joe, Jeffrey Clark [Idaho National Laboratory; Thomas, Kenneth David [Idaho National Laboratory; Boring, Ronald Laurids [Idaho National Laboratory

    2015-07-01

    Commercial nuclear power plants in the United States (U.S.) have operated reliably and efficiently for decades. With the life extensions of plants now being planned for operation beyond their original operating licenses, there are opportunities to achieve even greater efficiencies, while maintaining high operational reliabilities, with strategic, risk- and economically-informed, upgrades to plant systems and infrastructure. The U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) program supports the commercial nuclear industry’s modernization efforts through research and development (R&D) activities across many areas to help establish the technical and economic bases for modernization activities. The Advanced Instrumentation, Information, and Control Systems Technologies pathway is one R&D focus area for the LWRS program, and has researchers at Idaho National Laboratory working with select utility partners to use human factors and instrumentation and controls R&D to help modernize the plant’s main control room. However, some in the nuclear industry have not been as enthusiastic about using human factors R&D to inform life extension decision making. Part of the reason for this may stem from uncertainty decision-makers have regarding how human factors fits into the value chain for nuclear power plant control room modernization. This paper reviews past work that has attempted to demonstrate the value of human factors, and then describes the value chain concept, how it applies to control room modernization, and then makes a case for how and why human factors is an essential link in the modernization value chain.

  1. Habitability and Human Factors: Lessons Learned in Long Duration Space Flight

    Science.gov (United States)

    Baggerman, Susan D.; Rando, Cynthia M.; Duvall, Laura E.

    2006-01-01

    This study documents the investigation of qualitative habitability and human factors feedback provided by scientists, engineers, and crewmembers on lessons learned from the ISS Program. A thorough review and understanding of this data is critical in charting NASA's future path in space exploration. NASA has been involved in ensuring that the needs of crewmembers to live and work safely and effectively in space have been met throughout the ISS Program. Human factors and habitability data has been collected from every U.S. crewmember that has resided on the ISS. The knowledge gained from both the developers and inhabitants of the ISS have provided a significant resource of information for NASA and will be used in future space exploration. The recurring issues have been tracked and documented; the top 5 most critical issues have been identified from this data. The top 5 identified problems were: excessive onsrbit stowage; environment; communication; procedures; and inadequate design of systems and equipment. Lessons learned from these issues will be used to aid in future improvements and developments to the space program. Full analysis of the habitability and human factors data has led to the following recommendations. It is critical for human factors to be involved early in the design of space vehicles and hardware. Human factors requirements need to be readdressed and redefined given the knowledge gained during previous ISS and long-duration space flight programs. These requirements must be integrated into vehicle and hardware technical documentation and consistently enforced. Lastly, space vehicles and hardware must be designed with primary focus on the user/operator to successfully complete missions and maintain a safe working environment. Implementation of these lessons learned will significantly improve NASA's likelihood of success in future space endeavors.

  2. Technical innovation and management

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Yang Cheol

    1982-08-15

    This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

  3. Technical innovation and management

    International Nuclear Information System (INIS)

    Yoon, Yang Cheol

    1982-08-01

    This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

  4. Revolutions and shifting paradigms in human factors & ergonomics.

    Science.gov (United States)

    Boff, Kenneth R

    2006-07-01

    The "Revolution in Information Technology" has spawned a series of transformational revolutions in the nature and practice of human factors and ergonomics (HFE). "Generation 1" HFE evolved with a focus on adapting equipment, workplace and tasks to human capabilities and limitations. Generation 2, focused on cognitive systems integration, arose in response to the need to manage automation and dynamic function allocation. Generation 3 is focused on symbiotic technologies that can amplify human physical and cognitive capabilities. Generation 4 is emergent and is focused on biological enhancement of physical or cognitive capabilities. The shift from HFE Generations 1 and 2 to Generations 3 and 4 profoundly alters accepted boundary constraints on the adaptability of humans in complex systems design. Furthermore, it has opened an ethical divide between those that see cognitive and physical enhancement as a great benefit to society and those who perceive this as tampering with the fundamentals of human nature.

  5. Tissue localization of human trefoil factors 1, 2, and 3

    DEFF Research Database (Denmark)

    Madsen, Jens; Nielsen, Ole; Tornøe, Ida

    2007-01-01

    Trefoil factors (TTFs) are small, compact proteins coexpressed with mucins in the gastrointestinal tract. Three trefoil factors are known in mammals: TFF1, TFF2, and TFF3. They are implicated to play diverse roles in maintenance and repair of the gastrointestinal channel. We compared the expression...... pattern of the three trefoil factors analyzing mRNA from a panel of 20 human tissues by conventional reverse transcriptase (RT) PCR and, in addition, by real-time PCR. These findings were supported by immunohistochemical analysis of paraffin-embedded human tissues using rabbit polyclonal antibodies raised...... against these factors. TFF1 showed highest expression in the stomach and colon, whereas TFF2 and TFF3 showed highest expression in stomach and colon, respectively. All three TFFs were found in the ducts of pancreas. Whereas TFF2 was found to be restricted to these two tissues, the structurally more...

  6. The Great Instauration: Restoring Professional and Technical Writing to the Humanities.

    Science.gov (United States)

    Di Renzo, Anthony

    2002-01-01

    Gathers some of Sir Francis Bacon's educational ideas from his various writings and applies them to the five stages of undergraduate professional and technical writing program development: planning, implementation, mission, design and development, staffing, and administration. (SG)

  7. Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

    International Nuclear Information System (INIS)

    O'Hara, J.M.; Brown, W.S.; Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J.

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator's overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use

  8. Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.M.; Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J. [Carlow International Inc., Falls Church, VA (United States)

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

  9. Level of perception of technical terms regarding the effect of radiation on the human body by residents of Japan.

    Science.gov (United States)

    Yoshida, Yoshitoku; Yoshida, Yasuko; Isogai, Emiko; Hayase, Takashi; Nakamura, Kozue; Saito, Mitsuo; Arizono, Koji

    2017-10-27

    This study aimed to examine the level of perception of the technical terms related to the effect of radiation on the human body among residents of the six prefectures of Miyagi, Fukushima, Tokyo, Aichi, Hiroshima, and Nagasaki in Japan. Miyagi and Fukushima were selected as devastated area by Great East Japan Earthquake. Tokyo and Aichi were selected as control. Hiroshima and Nagasaki were selected as the A-bombed area. A total of 1030 respondents, 172, 173, 171, 173, 171, and 170, respectively, were surveyed. Differences in the recognition level of technical terms related to the effect of radiation on the human body among residents of the six prefectures were assessed. The highest recognition levels were reported by the respondents from Fukushima (17 items). Those from Miyagi scored the second highest recognition levels (10 out of the 17 terms); the second highest recognition levels for the remaining seven terms were marked by the respondents of Tokyo. Respondents in the Tohoku region had a better recognition for the technical terminology relevant to the effect of radiation on the human body. Our findings indicate a need for continued, comprehensive risk communication pertaining to health hazards of radiation exposure in Tohoku region. Concerted efforts by central/local governments and other stakeholders are required to allay the anxiety/stress related to radiation exposure among the residents.

  10. Critical human-factors issues in nuclear-power regulation and a recommended comprehensive human-factors long-range plan. Critical discussion of human factors areas of concern

    International Nuclear Information System (INIS)

    Hopkins, C.O.; Snyder, H.L.; Price, H.E.; Hornick, R.J.; Mackie, R.R.; Smillie, R.J.; Sugarman, R.C.

    1982-08-01

    This comprehensive long-range human factors plan for nuclear reactor regulation was developed by a Study Group of the Human Factors Society, Inc. This Study Group was selected by the Executive Council of the Society to provide a balanced, experienced human factors perspective to the applications of human factors scientific and engineering knowledge to nuclear power generation. The report is presented in three volumes. Volume 1 contains an Executive Summary of the 18-month effort and its conclusions. Volume 2 summarizes all known nuclear-related human factors activities, evaluates these activities wherever adequate information is available, and describes the recommended long-range (10-year) plan for human factors in regulation. Volume 3 elaborates upon each of the human factors issues and areas of recommended human factors involvement contained in the plan, and discusses the logic that led to the recommendations

  11. Human factors review for Severe Accident Sequence Analysis (SASA)

    International Nuclear Information System (INIS)

    Krois, P.A.; Haas, P.M.; Manning, J.J.; Bovell, C.R.

    1984-01-01

    The paper will discuss work being conducted during this human factors review including: (1) support of the Severe Accident Sequence Analysis (SASA) Program based on an assessment of operator actions, and (2) development of a descriptive model of operator severe accident management. Research by SASA analysts on the Browns Ferry Unit One (BF1) anticipated transient without scram (ATWS) was supported through a concurrent assessment of operator performance to demonstrate contributions to SASA analyses from human factors data and methods. A descriptive model was developed called the Function Oriented Accident Management (FOAM) model, which serves as a structure for bridging human factors, operations, and engineering expertise and which is useful for identifying needs/deficiencies in the area of accident management. The assessment of human factors issues related to ATWS required extensive coordination with SASA analysts. The analysis was consolidated primarily to six operator actions identified in the Emergency Procedure Guidelines (EPGs) as being the most critical to the accident sequence. These actions were assessed through simulator exercises, qualitative reviews, and quantitative human reliability analyses. The FOAM descriptive model assumes as a starting point that multiple operator/system failures exceed the scope of procedures and necessitates a knowledge-based emergency response by the operators. The FOAM model provides a functionally-oriented structure for assembling human factors, operations, and engineering data and expertise into operator guidance for unconventional emergency responses to mitigate severe accident progression and avoid/minimize core degradation. Operators must also respond to potential radiological release beyond plant protective barriers. Research needs in accident management and potential uses of the FOAM model are described. 11 references, 1 figure

  12. Integrating human factors and artificial intelligence in the development of human-machine cooperation

    NARCIS (Netherlands)

    Maanen, P.P. van; Lindenberg, J.; Neericx, M.A.

    2005-01-01

    Increasing machine intelligence leads to a shift from a mere interactive to a much more complex cooperative human-machine relation requiring a multidisciplinary development approach. This paper presents a generic multidisciplinary cognitive engineering method CE+ for the integration of human factors

  13. Human factors with nonhumans - Factors that affect computer-task performance

    Science.gov (United States)

    Washburn, David A.

    1992-01-01

    There are two general strategies that may be employed for 'doing human factors research with nonhuman animals'. First, one may use the methods of traditional human factors investigations to examine the nonhuman animal-to-machine interface. Alternatively, one might use performance by nonhuman animals as a surrogate for or model of performance by a human operator. Each of these approaches is illustrated with data in the present review. Chronic ambient noise was found to have a significant but inconsequential effect on computer-task performance by rhesus monkeys (Macaca mulatta). Additional data supported the generality of findings such as these to humans, showing that rhesus monkeys are appropriate models of human psychomotor performance. It is argued that ultimately the interface between comparative psychology and technology will depend on the coordinated use of both strategies of investigation.

  14. Technical issues of electric nanopulse contact lithotripsy as factors affecting lithotripsy effectiveness and probe resourses

    Directory of Open Access Journals (Sweden)

    L. Yu. Ivanova

    2012-01-01

    Full Text Available To assess the relationship of main technical issues of electric nanopulse contact lithotripsy (CLT with lithotripsy effectiveness and lithotripsy resources of probe.Electric nanopulses were transmitted by the flexible probes and the lithotripter «Urolit». The relationship between lithotripsy effectiveness and tip diameter of probes, pulse energy, pulse frequency was assessed, and resources of lithotripsy probes with different diameters of the tip were analyzed.Sufficient number of electric nanopulse to destroy stone models was less when tip diameter, nanopulse energy and frequency were greater.Effectiveness of electric nanopulse CLT can be enhanced with the increase of nanopulse energy, frequency and probe diameter. Complex correction of technical issues of electric nanopulse CLT can be a way of probe resources saving.

  15. A Virtual Campus Based on Human Factor Engineering

    Science.gov (United States)

    Yang, Yuting; Kang, Houliang

    2014-01-01

    Three Dimensional or 3D virtual reality has become increasingly popular in many areas, especially in building a digital campus. This paper introduces a virtual campus, which is based on a 3D model of The Tourism and Culture College of Yunnan University (TCYU). Production of the virtual campus was aided by Human Factor and Ergonomics (HF&E), an…

  16. Expression of human soluble tumor necrosis factor (TNF)-related ...

    African Journals Online (AJOL)

    DR NJ TONUKARI

    2011-06-06

    Jun 6, 2011 ... bio-technique in bacterial (Lin et al., 2007), yeast (Xu et al., 2003) ... biological activity, such as human somatotropin (hST) .... sion way with chloroplast transit peptide (Wang et al., .... chloroplast protein synthesis capacity by massive expression of a ... necrosis factor-related apoptosis-inducing ligand in vivo.

  17. SafetyNet. Human factors safety training on the Internet

    DEFF Research Database (Denmark)

    Hauland, G.; Pedrali, M.

    2002-01-01

    This report describes user requirements to an Internet based distance learning system of human factors training, i.e. the SafetyNet prototype, within the aviation (pilots and air traffic control), maritime and medical domains. User requirements totraining have been elicited through 19 semi...

  18. Human Factors Evaluation of Advanced Electric Power Grid Visualization Tools

    Energy Technology Data Exchange (ETDEWEB)

    Greitzer, Frank L.; Dauenhauer, Peter M.; Wierks, Tamara G.; Podmore, Robin

    2009-04-01

    This report describes initial human factors evaluation of four visualization tools (Graphical Contingency Analysis, Force Directed Graphs, Phasor State Estimator and Mode Meter/ Mode Shapes) developed by PNNL, and proposed test plans that may be implemented to evaluate their utility in scenario-based experiments.

  19. Sexual orientation and risk factors for Human Immunodeficiency ...

    African Journals Online (AJOL)

    The issue of homosexuality attracts global debate, given that this constitutes risk factor for sexually transmitted diseases. An exploration of socio-cultural, religious and sexual activities of lesbian, gay, bisexual, transgender and intersex sector would inform future Human Immunodeficiency Virus programming.

  20. The future of intelligent manufacturing systems and human factors

    NARCIS (Netherlands)

    Vink, P.; Stahre, J.

    2006-01-01

    In this paper the results of a 3 year European project are described. In this project 20 experts in the field of human factors define the most promising way of using the European work force in manufacturing in the future. Based on discussions between the experts and participating companies and

  1. Pattern of hormone receptors and human epidermal growth factor ...

    African Journals Online (AJOL)

    Introduction: Breast cancer is the most common cancer among women globally. With immunohistochemistry (IHC), breast cancer is classified into four groups based on IHC profile of estrogen receptor (ER)/progesterone receptor (PR) and human epidermal growth factor receptor 2 (HER2/neu) expression, positive (+) and/or ...

  2. Human intrinsic factor expressed in the plant Arabidopsis thaliana

    DEFF Research Database (Denmark)

    Fedosov, Sergey N; Laursen, Niels B; Nexø, Ebba

    2003-01-01

    Intrinsic factor (IF) is the gastric protein that promotes the intestinal uptake of vitamin B12. Gastric IF from animal sources is used in diagnostic tests and in vitamin pills. However, administration of animal IF to humans becomes disadvantageous because of possible pathogenic transmission...

  3. Impacts of geo-physical factors and human disturbance on ...

    African Journals Online (AJOL)

    We examined vegetation-disturbance-environment relationships in the Xiaomengyang Section of Xishuangbanna Nature Reserve (XNR) using multivariate analysis to understand the impacts of geo-physical factors and human disturbance on vegetation along the highway corridor. We found that native forests were the best ...

  4. The influence of marital factors on genital human papilloma virus ...

    African Journals Online (AJOL)

    Aim: To study the association between marital factors and human papilloma virus (HPV) infection of the cervix. Method: The subjects were 450 randomly selected sexually active women attending the antenatal, postnatal, gynaecology and family planning clinics in the Department of Obstetrics and Gynaecology of the ...

  5. Prevalence And Risk Factors For Human Pappiloma Virus Infection ...

    African Journals Online (AJOL)

    Human Pappiloma Virus (HPV) infection is a disease of global public health importance, culminating into a high risk of cervical cancer. Most of the risk factors are modifiable, thus making HPV itself preventable. Efforts towards community HPV prevention and vaccination have not yielded the desired results, most especially ...

  6. Prevalence and Risk Factors of High Risk Human Papillomavirus ...

    African Journals Online (AJOL)

    Cervical cancer is the most common female cancer in northern Nigeria, yet the pattern of infection with human papillomavirus, the principal aetiologic agent is unknown. This was a preliminary study conducted in two referral hospitals in order to establish base-line data on the prevalence and risk factors for the infection in ...

  7. Human factors in organizational design and management VI

    NARCIS (Netherlands)

    Vink, P.; Koningsveld, E.A.P.; Dhondt, S.

    1998-01-01

    This book contains proceedings of the Sixth International Symposium on Human Factors in Organizational Design and Management held in The Hague, The Netherlands, August 19-22, 1998. The Symposium was sponsored jointly by the International Ergonomics Society, the Dutch Ergonomics Society, NIA TNO and

  8. The factor structure of the Maslach Burnout Inventory Human ...

    African Journals Online (AJOL)

    kirstam

    The factor structure of the Maslach Burnout Inventory. Human Services Survey across a sample of client service employees. C. Steyn. 6ABSTRACT. 12The negative consequences of burnout in the client service environment point to the importance of further research into the manner in which the unique challenges faced by ...

  9. Understanding human factors in cyber security as a dynamic system

    NARCIS (Netherlands)

    Young, H.J.; Vliet, A.J. van; Ven, J.G.S. van de; Jol, S.C.; Broekman, C.C.M.T.

    2018-01-01

    The perspective of human factors is largely missing from the wider cyber security dialogue and its scope is often limited. We propose a framework in which we consider cyber security as a state of a system. System change is brought on by an entity’s behavior. Interventions are ways of changing

  10. Human factors engineering review for CRT screen design

    International Nuclear Information System (INIS)

    Yi, S. M.; Joo, C. Y.; Ra, J. C.

    1999-01-01

    The information interface between man and machine may be more important than hardware and workplace layout considerations. Transmitting and receiving data through this information interface can be characterized as a communication or interface problem. Management of man-machine interface is essential for the enhancement of the information processing and decision-making capability of computer users working in real time, demanding task. The design of human-computer interface is not a rigid and static procedure. The content and context of each interface varies according to the specific application. So, the purpose of this study is to review the human factor design process for interfaces, to make human factor guidelines for CRT screen and to apply these to CRT screen design. (author)

  11. Understanding human and organisational factors - Nuclear safety and at-risk organisations

    International Nuclear Information System (INIS)

    Bernard, Benoit

    2014-01-01

    This book addresses human and organisational factors which are present at different moments of the lifetime of an at-risk installation (from design to dismantling). At-risk organisations are considered as firstly human systems, and the objective is then to highlight individual and collective mechanisms in these organisations. Several questions are addressed, notably the origins of at-risk behaviour, and the reasons of the repetition of errors by these organisations. A first chapter, while referring to examples, addresses the human dimension of safety: human and organisational factors as obstacles, normal accidents (Three Mile Island), accidents in high-reliability organisations (Chernobyl), identification of root causes (Tokai-mura), and social-technical approach to safety (Fukushima). By also referring to examples, the second chapter addresses how to analyse at-risk organisations: individual behaviours (case of naval and air transport accidents), team coordination (a fire, the Challenger accident), and organisational regulation (organisations forms and routines, explosion of BP Texas City, explosion of Columbia)

  12. Early variability in the conceptualisation of "sustainable development and human factors".

    Science.gov (United States)

    Thatcher, Andrew

    2012-01-01

    The sub-discipline of "sustainable development and human factors" is relatively new, first being used in 2006 with a Technical Committee of the IEA being established only in 2009 and a similar special interest group on "green ergonomics" at the Institute of Ergonomics and Human Factors being established in 2010. In general though, the definitions and practice of "sustainable development" is highly contentious and ambiguous across a range of disciplines. This paper examines the diversity of definitions and approaches to sustainable development and human factors in the early papers in this sub-discipline. An examination of 45 chapters and papers (from 2008 to 2011) reveals a surprising consistency in the definitions used for sustainable development but also a large proportion of the papers where no definitions are given at all. The majority of papers were, however, biased towards an economic capital and social capital emphasis, which is to be expected of work traditionally in the ergonomics paradigm. Further, most papers were theoretical in nature demonstrating a great opportunity for empirical work. The variability in definitions is discussed in relation to the future challenges facing the growth of this emergent sub-discipline and opportunities for further theoretical and empirical work.

  13. Safety, reliability, risk management and human factors: an integrated engineering approach applied to nuclear facilities

    Energy Technology Data Exchange (ETDEWEB)

    Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)], e-mail: vasconv@cdtn.br, e-mail: silvaem@cdtn.br, e-mail: aclc@cdtn.br, e-mail: reissc@cdtn.br

    2009-07-01

    Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)

  14. Safety, reliability, risk management and human factors: an integrated engineering approach applied to nuclear facilities

    International Nuclear Information System (INIS)

    Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos

    2009-01-01

    Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)

  15. Preoperative short hookwire placement for small pulmonary lesions: evaluation of technical success and risk factors for initial placement failure.

    Science.gov (United States)

    Iguchi, Toshihiro; Hiraki, Takao; Matsui, Yusuke; Fujiwara, Hiroyasu; Masaoka, Yoshihisa; Tanaka, Takashi; Sato, Takuya; Gobara, Hideo; Toyooka, Shinichi; Kanazawa, Susumu

    2018-05-01

    To retrospectively evaluate the technical success of computed tomography fluoroscopy-guided short hookwire placement before video-assisted thoracoscopic surgery and to identify the risk factors for initial placement failure. In total, 401 short hookwire placements for 401 lesions (mean diameter 9.3 mm) were reviewed. Technical success was defined as correct positioning of the hookwire. Possible risk factors for initial placement failure (i.e., requirement for placement of an additional hookwire or to abort the attempt) were evaluated using logistic regression analysis for all procedures, and for procedures performed via the conventional route separately. Of the 401 initial placements, 383 were successful and 18 failed. Short hookwires were finally placed for 399 of 401 lesions (99.5%). Univariate logistic regression analyses revealed that in all 401 procedures only the transfissural approach was a significant independent predictor of initial placement failure (odds ratio, OR, 15.326; 95% confidence interval, CI, 5.429-43.267; p < 0.001) and for the 374 procedures performed via the conventional route only lesion size was a significant independent predictor of failure (OR 0.793, 95% CI 0.631-0.996; p = 0.046). The technical success of preoperative short hookwire placement was extremely high. The transfissural approach was a predictor initial placement failure for all procedures and small lesion size was a predictor of initial placement failure for procedures performed via the conventional route. • Technical success of preoperative short hookwire placement was extremely high. • The transfissural approach was a significant independent predictor of initial placement failure for all procedures. • Small lesion size was a significant independent predictor of initial placement failure for procedures performed via the conventional route.

  16. Development of safety and regulatory requirements for Korean next generation reactor - Development of human factors design review guidelines (II)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Lee, Hyun Chul; Cheon, Se Woo [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-02-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25. Human Factors Engineering Program Review Model' and '26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and the characteristics of the KNGR design, and reviewing the reference documents of NURGE-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides at KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system design review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we updated the guidelines by reviewing the literature related to alarm design that published after 1994. 12 refs., 11 figs., 2 tabs. (Author)

  17. Development of safety and regulatory requirements for Korean next generation reactor - Development of human factors design review guidelines (II)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Lee, Hyun Chul; Cheon, Se Woo [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-02-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25. Human Factors Engineering Program Review Model' and '26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and the characteristics of the KNGR design, and reviewing the reference documents of NURGE-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides at KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system design review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we updated the guidelines by reviewing the literature related to alarm design that published after 1994. 12 refs., 11 figs., 2 tabs. (Author)

  18. Human intrinsic factor expressed in the plant Arabidopsis thaliana

    DEFF Research Database (Denmark)

    Fedosov, Sergey N; Laursen, Niels B; Nexø, Ebba

    2003-01-01

    and contamination by other B12 binders. We tested the use of recombinant plants for large-scale production of pathogen-free human recombinant IF. Human IF was successfully expressed in the recombinant plant Arabidopsis thaliana. Extract from fresh plants possessed high B12-binding capacity corresponding to 70 mg...... to recombinant IF and gastric IF were alike, as was the interaction of recombinant and native IF with the specific receptor cubilin. The data presented show that recombinant plants have a great potential as a large-scale source of human IF for analytical and therapeutic purposes.......Intrinsic factor (IF) is the gastric protein that promotes the intestinal uptake of vitamin B12. Gastric IF from animal sources is used in diagnostic tests and in vitamin pills. However, administration of animal IF to humans becomes disadvantageous because of possible pathogenic transmission...

  19. National plan to enhance aviation safety through human factors improvements

    Science.gov (United States)

    Foushee, Clay

    1990-01-01

    The purpose of this section of the plan is to establish a development and implementation strategy plan for improving safety and efficiency in the Air Traffic Control (ATC) system. These improvements will be achieved through the proper applications of human factors considerations to the present and future systems. The program will have four basic goals: (1) prepare for the future system through proper hiring and training; (2) develop a controller work station team concept (managing human errors); (3) understand and address the human factors implications of negative system results; and (4) define the proper division of responsibilities and interactions between the human and the machine in ATC systems. This plan addresses six program elements which together address the overall purpose. The six program elements are: (1) determine principles of human-centered automation that will enhance aviation safety and the efficiency of the air traffic controller; (2) provide new and/or enhanced methods and techniques to measure, assess, and improve human performance in the ATC environment; (3) determine system needs and methods for information transfer between and within controller teams and between controller teams and the cockpit; (4) determine how new controller work station technology can optimally be applied and integrated to enhance safety and efficiency; (5) assess training needs and develop improved techniques and strategies for selection, training, and evaluation of controllers; and (6) develop standards, methods, and procedures for the certification and validation of human engineering in the design, testing, and implementation of any hardware or software system element which affects information flow to or from the human.

  20. Human factors/ergonomics as a systems discipline? "The human use of human beings" revisited.

    Science.gov (United States)

    Hollnagel, Erik

    2014-01-01

    Discussions of the possible future of Human factors/ergonomics (HFE) usually take the past for granted in the sense that the future of HFE is assumed to be more of the same. This paper argues that the nature of work in the early 2010s is so different from the nature of work when HFE was formulated 60-70 years ago that a critical reassessment of the basis for HFE is needed. If HFE should be a systems discipline, it should be a soft systems rather than a hard systems discipline. It is not enough for HFE to seek to improve performance and well-being through systems design, since any change to the work environment in principle alters the very basis for the change. Instead HFE should try to anticipate how the nature of work will change so that it can both foresee what work will be and propose what work should be. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  1. The importance of residues 195-206 of human blood clotting factor VII in the interaction of factor VII with tissue factor

    International Nuclear Information System (INIS)

    Wildgoose, P.; Kisiel, W.; Kazim, A.L.

    1990-01-01

    Previous studies indicated that human and bovine factor VII exhibit 71% amino acid sequence identity. In the present study, competition binding experiments revealed that the interaction of human factor VII with cell-surface human tissue factor was not inhibited by 100-fold molar excess of bovine factor VII. This finding indicated that bovine and human factor VII are not structurally homologous in the region(s) where human factor VII interacts with human tissue factor. On this premise, the authors synthesized three peptides corresponding to regions of human factor VII that exhibited marked structural dissimilarity to bovine factor VII; these regions of dissimilarity included residues 195-206, 263-274, and 314-326. Peptide 195-206 inhibited the interaction of factor VII with cell-surface tissue factor and the activation of factor X by a complex of factor VIIa and tissue factor half-maximally at concentrations of 1-2 mM. A structurally rearranged form of peptide 195-206 containing an aspartimide residue inhibited these reactions half-maximally at concentrations of 250-300 μM. In contrast, neither peptide 263-274 nor peptide 314-326, at 2 mM concentration, significantly affected either factor VIIa interaction with tissue factor or factor VIIa-mediated activation of factor X. The data provide presumptive evidence that residues 195-206 of human factor VII are involved in the interaction of human factor VII with the extracellular domain of human tissue factor apoprotein

  2. Space Flight Human System Standards (SFHSS). Volume 2; Human Factors, Habitability and Environmental Factors" and Human Integration Design Handbook (HIDH)

    Science.gov (United States)

    Davis, Jeffrey R.; Fitts, David J.

    2009-01-01

    This viewgraph presentation reviews the standards for space flight hardware based on human capabilities and limitations. The contents include: 1) Scope; 2) Applicable documents; 3) General; 4) Human Physical Characteristics and Capabilities; 5) Human Performance and Cognition; 6) Natural and Induced Environments; 7) Habitability Functions; 8) Architecture; 9) Hardware and Equipment; 10) Crew Interfaces; 11) Spacesuits; 12) Operatons: Reserved; 13) Ground Maintenance and Assembly: Reserved; 14) Appendix A-Reference Documents; 15) Appendix N-Acronyms and 16) Appendix C-Definition. Volume 2 is supported by the Human Integration Design Handbook (HIDH)s.

  3. The development of human factors technologies -The development of human behaviour analysis techniques-

    International Nuclear Information System (INIS)

    Lee, Jung Woon; Lee, Yong Heui; Park, Keun Ok; Chun, Se Woo; Suh, Sang Moon; Park, Jae Chang

    1995-07-01

    In order to contribute to human error reduction through the studies on human-machine interaction in nuclear power plants, this project has objectives to develop SACOM(Simulation Analyzer with a Cognitive Operator Model) and techniques for human error analysis and application. In this year, we studied the followings: 1) Site investigation of operator tasks, 2) Development of operator task micro structure and revision of micro structure, 3) Development of knowledge representation software and SACOM prototype, 4) Development of performance assessment methodologies in task simulation and analysis of the effects of performance shaping factors. 1) Classification of error shaping factors(ESFs) and development of software for ESF evaluation, 2) Analysis of human error occurrences and revision of analysis procedure, 3) Experiment for human error data collection using a compact nuclear simulator, 4) Development of a prototype data base system of the analyzed information on trip cases. 55 figs, 23 tabs, 33 refs. (Author)

  4. Human factors for the Moon: the gap in anthropometric data.

    Science.gov (United States)

    Lia Schlacht, Irene; Foing, Bernard H.; Rittweger, Joern; Masali, Melchiorre; Stevenin, Hervé

    2016-07-01

    Since the space era began, we learned first to survive and then to live in space. In the state of the art, we know how important human factors research and development is to guarantee maximum safety and performance for human missions. With the extension of the duration of space missions, we also need to learn how habitability and comfort factors are closely related to safety and performance. Humanities disciplines such as design, architecture, anthropometry, and anthropology are now involved in mission design from the start. Actual plans for building a simulated Moon village in order to simulate and test Moon missions are now being carried out using a holistic approach, involving multidisciplinary experts cooperating concurrently with regard to the interactions among humans, technology, and the environment. However, in order to implement such plans, we need basic anthropometrical data, which is still missing. In other words: to optimize performance, we need to create doors and ceilings with dimensions that support a natural human movement in the reduced gravity environment of the Moon, but we are lacking detailed anthropometrical data on human movement on the Moon. In the Apollo missions more than 50 years ago, no anthropometrical studies were carried in hypogravity out as far as we know. The necessity to collect data is very consistent with state-of-the-art research. We still have little knowledge of how people will interact with the Moon environment. Specifically, it is not known exactly which posture, which kind of walking and running motions astronauts will use both inside and outside a Moon station. Considering recent plans for a Moon mission where humans will spend extensive time in reduced gravity conditions, the need for anthropometric, biomechanics and kinematics field data is a priority in order to be able to design the right architecture, infrastructure, and interfaces. Objective of this paper: Bring knowledge on the relevance of anthropometrical and

  5. Human Factors Engineering: Current and Emerging Dual-Use Applications

    Science.gov (United States)

    Chandlee, G. O.; Goldsberry, B. S.

    1994-01-01

    Human Factors Engineering is a multidisciplinary endeavor in which information pertaining to human characteristics is used in the development of systems and machines. Six representatives considered to be experts from the public and private sectors were surveyed in an effort to identify the potential dual-use of human factors technology. Each individual was asked to provide a rating as to the dual-use of 85 identified NASA technologies. Results of the survey were as follows: nearly 75 percent of the technologies were identified at least once as high dual-use by one of the six survey respondents, and nearly 25 percent of the identified NASA technologies were identified as high dual-use technologies by a majority of the respondents. The perceived level of dual-use appeared to be independent of the technology category. Successful identification of dual-use technology requires expanded input from industry. As an adjunct, cost-benefit analysis should be conducted to identify the feasibility of the dual-use technology. Concurrent with this effort should be an examination of precedents established by other technologies in other industrial settings. Advances in human factors and systems engineering are critical to reduce risk in any workplace and to enhance industrial competitiveness.

  6. The development of human factors experimental evaluation techniques

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Bong Shick; Oh, In Suk; Cha, Kyung Ho; Lee, Hyun Chul; Park, Geun Ok; Cheon, Se Woo; Suh, Sang Moon

    1997-07-01

    New human factors issues, such as evaluation of information navigation, the consideration of operator characteristics, and operator performance assessment, related to the HMI design based on VDUs are being risen. Thus, in order to solve these human factors issues, this project aims to establish the experimental technologies including the techniques for experimental design, experimental measurement, data collection and analysis, and to develop ITF (Integrated Test Facility) suitable for the experiment of HMI design evaluation. For the establish of the experimental data analysis and evaluation methodologies, we developed as the following: (1) a paradigm for human factors experimentation including experimental designs, procedures, and data analysis. (2) the methods for the assessment of operator`s mental workload (3) DAEXESS (data analysis and experiment evaluation supporting system). Also, we have established a experiment execution technologies through the preliminary experiments, such as the suitability evaluation of information display on a LSDP, the evaluation of information display on a LSDP, the evaluation of computerized operation procedure and an experiment of advanced alarm system (ADIOS). Finally, we developed the ITF including human machine simulator, telemetry system, an eye tracking system, an audio/video data measurement system, and three dimensional micro behaviour analysis system. (author). 81 refs., 68 tabs., 73 figs.

  7. 76 FR 55213 - Technical Amendments to Federal Employees' Retirement System; Present Value Conversion Factors...

    Science.gov (United States)

    2011-09-07

    ... Employees' Retirement System; Present Value Conversion Factors for Spouses of Deceased Separated Employees... to read as follows: Appendix A to Subpart C of Part 843--Present Value Conversion Factors for Earlier...

  8. Critical human-factors issues in nuclear-power regulation and a recommended comprehensive human-factors long-range plan. Executive summary

    International Nuclear Information System (INIS)

    Hopkins, C.O.; Snyder, H.L.; Price, H.E.; Hornick, R.J.; Mackie, R.R.; Smillie, R.J.; Sugarman, R.C.

    1982-08-01

    This comprehensive long-range human factors plan for nuclear reactor regulation was developed by a Study Group of the Human Factors Society, Inc. This Study Group was selected by the Executive Council of the Society to provide a balanced, experienced human factors perspective to the applications of human factors scientific and engineering knowledge to nuclear power generation. The report is presented in three volumes. Volume 1 contains an Executive Summary of the 18-month effort and its conclusions. Volume 2 summarizes all known nuclear-related human factors activities, evaluates these activities wherever adequate information is available, and describes the recommended long-range (10-year) plan for human factors in regulation. Volume 3 elaborates upon each of the human factors issues and areas of recommended human factors involvement contained in the plan, and discusses the logic that led to the recommendations

  9. Human Factors Predicting Failure and Success in Hospital Information System Implementations in Sub-Saharan Africa.

    Science.gov (United States)

    Verbeke, Frank; Karara, Gustave; Nyssen, Marc

    2015-01-01

    From 2007 through 2014, the authors participated in the implementation of open source hospital information systems (HIS) in 19 hospitals in Rwanda, Burundi, DR Congo, Congo-Brazzaville, Gabon, and Mali. Most of these implementations were successful, but some failed. At the end of a seven-year implementation effort, a number of risk factors, facilitators, and pragmatic approaches related to the deployment of HIS in Sub-Saharan health facilities have been identified. Many of the problems encountered during the HIS implementation process were not related to technical issues but human, cultural, and environmental factors. This study retrospectively evaluates the predictive value of 14 project failure factors and 15 success factors in HIS implementation in the Sub-Saharan region. Nine of the failure factors were strongly correlated with project failure, three were moderately correlated, and one weakly correlated. Regression analysis also confirms that eight factors were strongly correlated with project success, four moderately correlated, and two weakly correlated. The study results may help estimate the expedience of future HIS projects.

  10. Characterization of a human antigen specific helper factor

    International Nuclear Information System (INIS)

    Richardson, B.

    1986-01-01

    While antigen (Ag) specific helper factors have been characterized in mice, similar molecules have not been identified in humans. To characterize human antigen specific helper molecules, an IL-2 dependent tetanus toxoid (T.T.) reactive T cell line was fused with a 6-thioguanine resistant CEM line, and hybrids selected in medium containing hypoxanthine and azaserine. Hybrids were screened by culturing the cells with 35 S-Met then reacting the supernatants with T.T. or hepatitis vaccine immobilized on nitrocellulose. One hybrid, TT6BA-O, was identified which secreted a Met-containing molecule which bound T.T. but not hepatitis vaccine. Supernatants from TT6BA-O, but not the parent CEM line, when added to autologous peripheral blood mononuclear cells (PBMC's) stimulated secretion of T.T. specific antibodies (Abs). Specificity controls demonstrated that TT6BA-O supernatant did not induce antibodies to diphtheria toxoid, hepatitis vaccine or pneumococcal polysaccharide, and total immunoglobulin (lg) synthesis was minimally increased. In contrast, pokeweed mitogen stimulated significant lg synthesis as well as Ab's to pneumococcal polysaccharide and T.T. TT6BA-O supernatant induced anti-T.T.Ab's in autologous PBMC's but not PBMC's from 3 unrelated donors, suggesting that the activity of the helper factor is restricted, possibly by the MHC. The molecular weight of the helper factor was estimated at 100,000-150,000 by Sephacryl S-300 chromatography. Finally, the helper factor could be demonstrated to bind and elute from sephorose-immobilized T.T. and anti-DR antisera, but not anti-lg antisera or the T40/25 monoclonal antibody, which binds a nonpolymorphic determinant on the human T cell receptor. These results demonstrate that human Ag specific helper factors exist, bind antigen and bear class II MHC determinants

  11. Intrinsic factor in human amniotic fluid as determined by radioimmunoassay

    International Nuclear Information System (INIS)

    Wahlstedt, V.; Stenman, U.-H.; Ylinen, K.; Graesbeck, R.

    1983-01-01

    The intrinsic factor (IF) concentration in 55 human amniotic fluid specimens was determined by radioimmunoassay (RIA). The antiserum was produced by immunizing rabbits with the cobalamin-IF complex isolated from human gastric juice. The median concentration of IF was 0.17 nmol/l and the extreme values <0.07-2.51 nmol/l. Three specimens with a clearly elevated level (0.96, 1.11 and 2.51 nmol/l) were observed. The highest value was associated with a fetal malformation, viz. obstruction of the proximal gut. There was no evident correlation between the concentration of IF in amniotic fluid and gestational age. (author)

  12. The human factor in high-tech plant operation

    Energy Technology Data Exchange (ETDEWEB)

    Grassani, E

    1988-02-01

    The article develops a series of considerations on reliability standards applied to operators of technologically complex industrial installations. From research conducted within the field of cognitive psychology, significant indications are emerging relative to professional training within industry, as well as to the functional and human interface characteristics of automated control systems. Recent tragic incidents (Three Mile Island nuclear power plant, Bopal methyl isocynate storage, Mexico City petroleum tank farm and Chernobylsk-4 reactor) have evidenced the greater weight that should be given to human factors in plant safety and reliability assessments and planning.

  13. Research and development studies on human factors: new trends

    International Nuclear Information System (INIS)

    Llory, M.; Larchier-Boulanger, J.

    1988-01-01

    This paper is aimed at describing where the research work on human factors undertaken at EDF stands in relation to this European trend and to define the problematics of cognitive phenomena in relation to all (non cognitive) human phenomena, on the one hand, and to individual aspects as compared to collective and organizational aspects, on the other. Some important trends in the research and development studies will thus be examined one lay one: - analysis of operators' activity; - analysis of the activity cognitive aspects; - problem of the impact of non-cognitive aspects

  14. Human and social factors in the transportation of nuclear wastes

    International Nuclear Information System (INIS)

    Freudenburg, W.R.

    1991-01-01

    The main body of this report is a broad-based examination of human and social factors in the transportation of nuclear wastes. It deals with pair interested problems that, while familiar to the social science community, appear to have received little attention from the risk assessment community to data: The human and social attenuation of risk estimates, and the organizational amplification of risks. Second, given the special opportunities for learning that are presented by the recent Alaska oil spill, in particular, the Appendix to this report examines the issue of organizational foresight in the context of the Exxon oil spill

  15. Human factors: a major issue in plant aging

    International Nuclear Information System (INIS)

    Widrig, R.D.

    1985-07-01

    Human factors issues will be of great significance in the safe and reliable operation of aging nuclear power plants, and they may be more important than materials/component-type issues. Human actions can accelerate or decelerate te physical aging process. And an aging plant can have significant negative implications on staff performance and actions. Some examples include difficulties in attracting and retaining good managers, financial decisions based on a short and uncertain remaining plant life, difficulties in replacing retiring staff, increased maintenance complexity, and increased burden on training. These problems can be dealt with more effectively by early recognition and a well conceived mitigation effort

  16. Technical innovations in communication : how to relate technology to business by a culturally reliable human interface

    NARCIS (Netherlands)

    Ulijn, J.M.; Campbell, Ch.; Malkinson, T.

    1999-01-01

    The technology that makes the world into the global village envisioned by Marshall McLuhan more than 30 years ago now seems to be in place. thanks to the Internet and the World Wide Web. Technical innovations in communication technology have been quickly exploited by businesses to expand their reach

  17. The Effect of Career and Technical Education on Human Capital Accumulation: Causal Evidence from Massachusetts

    Science.gov (United States)

    Dougherty, Shaun M.

    2018-01-01

    Earlier work demonstrates that career and technical education (CTE) can provide long-term financial benefits to participants, yet few have explored potential academic impacts, with none in the era of high-stakes accountability. This paper investigates the causal impact of participating in a specialized high school-based CTE delivery system on high…

  18. Impact of Geotechnical Factors on the Safety of Low Embankment Dams From the Perspective of Technical and Safety Supervision

    Directory of Open Access Journals (Sweden)

    Kasana Andrej

    2015-03-01

    Full Text Available Our research deals with a broad spectrum of problems concerning the variability of geotechnical factors and their influence on the safety of the biggest group of dam constructions in Slovakia, i.e., low earthfill dams. Its specific aim is the observation of their risk factors by using our experience and knowledge gained while working in the sector of technical and safety supervision. To achieve the aims of a research thesis, we analyzed 39 low earthfill dams. We performed observations and documented their conditions with the aim of clarifying the risk factors. After an analysis of the information materials that characterize dams and after a statistical analysis of the measurement results in situ, including measurements from technical and safety supervision databases, we performed an analysis by using mathematical modeling to evaluate the safety of the dam constructions. Out of the total number of 39 dam constructions, an analysis of the stability of the dam slopes was performed on 37 dams, and deformation problems were analyzed on 28 of the dams. Filtration problems were analyzed at 26 dams, and a complete evaluation of the intensity of filtration movements was performed on 19 of the constructions.

  19. The effect of environmental factors on technical and scale efficiency of primary health care providers in Greece

    Directory of Open Access Journals (Sweden)

    Aletras Vassilis H

    2007-11-01

    Full Text Available Abstract Background The purpose of this study was to compare technical and scale efficiency of primary care centers from the two largest Greek providers, the National Health System (NHS and the Social Security Foundation (IKA and to determine if, and how, efficiency is affected by various exogenous factors such as catchment population and location. Methods The sample comprised of 194 units (103 NHS and 91 IKA. Efficiency was measured with Data Envelopment Analysis (DEA using three inputs, -medical staff, nursing/paramedical staff, administrative/other staff- and two outputs, which were the aggregated numbers of scheduled/emergency patient visits and imaging/laboratory diagnostic tests. Facilities were categorized as small, medium and large (30,000 respectively to reflect catchment population and as urban/semi-urban or remote/island to reflect location. In a second stage analysis, technical and scale efficiency scores were regressed against facility type (NHS or IKA, size and location using multivariate Tobit regression. Results Regarding technical efficiency, IKA performed better than the NHS (84.9% vs. 70.1%, Mann-Whitney P P P = 0.103. As for scale efficiency, IKA again outperformed the NHS (89.7% vs. 85.9%, Mann-Whitney P = 0.080, but results were reversed in respect to facility size and location. Specifically, larger units performed better (96.3% vs. 90.9% vs. 75.9%, Kruskal-Wallis P P Conclusion Variations appeared to exist in the productive performance of the NHS and IKA as the two main primary care providers in Greece. These variations reflect differences in primary care organization, economical incentives, financial constraints, sociodemographic and local peculiarities. In all technical efficiency comparisons, IKA facilities appeared to outperform NHS ones irrespective of facility size or location. In respect to scale efficiency, the results were to some extent inconclusive and observed differences were mostly insignificant, although

  20. Human factors issues in the use of artificial intelligence in air traffic control. October 1990 Workshop

    Science.gov (United States)

    Hockaday, Stephen; Kuhlenschmidt, Sharon (Editor)

    1991-01-01

    The objective of the workshop was to explore the role of human factors in facilitating the introduction of artificial intelligence (AI) to advanced air traffic control (ATC) automation concepts. AI is an umbrella term which is continually expanding to cover a variety of techniques where machines are performing actions taken based upon dynamic, external stimuli. AI methods can be implemented using more traditional programming languages such as LISP or PROLOG, or they can be implemented using state-of-the-art techniques such as object-oriented programming, neural nets (hardware or software), and knowledge based expert systems. As this technology advances and as increasingly powerful computing platforms become available, the use of AI to enhance ATC systems can be realized. Substantial efforts along these lines are already being undertaken at the FAA Technical Center, NASA Ames Research Center, academic institutions, industry, and elsewhere. Although it is clear that the technology is ripe for bringing computer automation to ATC systems, the proper scope and role of automation are not at all apparent. The major concern is how to combine human controllers with computer technology. A wide spectrum of options exists, ranging from using automation only to provide extra tools to augment decision making by human controllers to turning over moment-by-moment control to automated systems and using humans as supervisors and system managers. Across this spectrum, it is now obvious that the difficulties that occur when tying human and automated systems together must be resolved so that automation can be introduced safely and effectively. The focus of the workshop was to further explore the role of injecting AI into ATC systems and to identify the human factors that need to be considered for successful application of the technology to present and future ATC systems.