WorldWideScience

Sample records for human factors engineer

  1. Human Factors Analysis in Software Engineering

    Institute of Scientific and Technical Information of China (English)

    Xu Ren-zuo; Ma Ruo-feng; Liu Li-na; Xiong Zhong-wei

    2004-01-01

    The general human factors analysis analyzes human functions, effects and influence in a system. But in a narrow sense, it analyzes human influence upon the reliability of a system, it includes traditional human reliability analysis, human error analysis, man-machine interface analysis, human character analysis, and others. A software development project in software engineering is successful or not to be completely determined by human factors. In this paper, we discuss the human factors intensions, declare the importance of human factors analysis for software engineering by listed some instances. At last, we probe preliminarily into the mentality that a practitioner in software engineering should possess.

  2. Human Factors Engineering. Student Supplement,

    Science.gov (United States)

    1981-08-01

    Psychologists as Division 21 of the APA . It seems fitting, now that engineering psychology has been recognized as a viable entity, that we examine this new...34INFIC 161ST SCALE ___________ P CIUUIOIC POP40 3 SMTCPWONSI OARIA C0" NORMA . IN. AIDS AMU Ls". PLA0D 11aw Lu". FILM PACK CLR so. RAW MOTIVE LIS mm’ 7

  3. Human Factors Engineering Program Review Model

    Science.gov (United States)

    2004-02-01

    AA NUREG -0711,Rev. 2 Human Factors Engineering Program Review Model 20081009191 I i m To] Bi U.S. Nuclear Regulatory Commission Office of...Material As of November 1999, you may electronically access NUREG -series publications and other NRC records at NRC’s Public Electronic Reading Room at...http://www.nrc.qov/readinq-rm.html. Publicly released records include, to name a few, NUREG -series publications; Federal Register notices; applicant

  4. Rapid Prototyping and the Human Factors Engineering Process

    Science.gov (United States)

    2016-08-29

    Rapid prototyping and the human factors • • engineering process David Beevis* and Gaetan St Denist *Senior Human Factors Engineer , Defence and...factors engineering analyses. Therefore, an investigation of the use of the V APS virtual prototyping system was carried out in five organizations. The...factors engineering (HFE) process re- commended for the development of human-machine systems is based on a series of increasin¥ly detailed analyses of

  5. Human factors engineering program review model

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    The staff of the Nuclear Regulatory Commission is performing nuclear power plant design certification reviews based on a design process plan that describes the human factors engineering (HFE) program elements that are necessary and sufficient to develop an acceptable detailed design specification and an acceptable implemented design. There are two principal reasons for this approach. First, the initial design certification applications submitted for staff review did not include detailed design information. Second, since human performance literature and industry experiences have shown that many significant human factors issues arise early in the design process, review of the design process activities and results is important to the evaluation of an overall design. However, current regulations and guidance documents do not address the criteria for design process review. Therefore, the HFE Program Review Model (HFE PRM) was developed as a basis for performing design certification reviews that include design process evaluations as well as review of the final design. A central tenet of the HFE PRM is that the HFE aspects of the plant should be developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The HFE PRM consists of ten component elements. Each element in divided into four sections: Background, Objective, Applicant Submittals, and Review Criteria. This report describes the development of the HFE PRM and gives a detailed description of each HFE review element.

  6. Human Factors Interface with Systems Engineering for NASA Human Spaceflights

    Science.gov (United States)

    Wong, Douglas T.

    2009-01-01

    This paper summarizes the past and present successes of the Habitability and Human Factors Branch (HHFB) at NASA Johnson Space Center s Space Life Sciences Directorate (SLSD) in including the Human-As-A-System (HAAS) model in many NASA programs and what steps to be taken to integrate the Human-Centered Design Philosophy (HCDP) into NASA s Systems Engineering (SE) process. The HAAS model stresses systems are ultimately designed for the humans; the humans should therefore be considered as a system within the systems. Therefore, the model places strong emphasis on human factors engineering. Since 1987, the HHFB has been engaging with many major NASA programs with much success. The HHFB helped create the NASA Standard 3000 (a human factors engineering practice guide) and the Human Systems Integration Requirements document. These efforts resulted in the HAAS model being included in many NASA programs. As an example, the HAAS model has been successfully introduced into the programmatic and systems engineering structures of the International Space Station Program (ISSP). Success in the ISSP caused other NASA programs to recognize the importance of the HAAS concept. Also due to this success, the HHFB helped update NASA s Systems Engineering Handbook in December 2007 to include HAAS as a recommended practice. Nonetheless, the HAAS model has yet to become an integral part of the NASA SE process. Besides continuing in integrating HAAS into current and future NASA programs, the HHFB will investigate incorporating the Human-Centered Design Philosophy (HCDP) into the NASA SE Handbook. The HCDP goes further than the HAAS model by emphasizing a holistic and iterative human-centered systems design concept.

  7. Advanced Human Factors Engineering Tool Technologies.

    Science.gov (United States)

    1987-03-20

    the mail and telephone surveys. The authors would also like to extend a special thanks to Mr. David Rose of the Naval Air Development Center for his...ADVANCED NUNAN FACTORS ENGINEERING TOOL TECHNOLOGIES 3/3 (U) CARLON ASSOCIATES INC FAIRFAX Yff S A FLEGER ET AL. UNCLRS 20 NAR B? DARI5-BS-C-NO64 WIL...34" ".--: :’-...2,,. ,..:,.- ,’-"-’:"- "’-::"-,2 ., ..,," ,.- ..’.-.-.’.-,-. : .....v. _ *’--..., ...-- ,,. - -.; , :¢ 4., 5 5 lPeter laines Mr. David M. Ilarrah

  8. Human factor engineering applied to nuclear power plant design

    Energy Technology Data Exchange (ETDEWEB)

    Manrique, A. [TECNATOM SA, BWR General Electric Business Manager, Madrid (Spain); Valdivia, J.C. [TECNATOM SA, Operation Engineering Project Manager, Madrid (Spain); Jimenez, A. [TECNATOM SA, Operation Engineering Div. Manager, Madrid (Spain)

    2001-07-01

    For the design and construction of new nuclear power plants as well as for maintenance and operation of the existing ones new man-machine interface designs and modifications are been produced. For these new designs Human Factor Engineering must be applied the same as for any other traditional engineering discipline. Advantages of implementing adequate Human Factor Engineering techniques in the design of nuclear reactors have become not only a fact recognized by the majority of engineers and operators but also an explicit requirement regulated and mandatory for the new designs of the so called advanced reactors. Additionally, the big saving achieved by a nuclear power plant having an operating methodology which significantly decreases the risk of operating errors makes it necessary and almost vital its implementation. The first step for this is preparing a plan to incorporate all the Human Factor Engineering principles and developing an integral design of the Instrumentation and Control and Man-machine interface systems. (author)

  9. Human Factors Engineering Aspects of Modifications in Control Room Modernization

    Energy Technology Data Exchange (ETDEWEB)

    Hugo, Jacques; Clefton, Gordon; Joe, Jeffrey

    2017-06-01

    This report describes the basic aspects of control room modernization projects in the U.S. nuclear industry and the need for supplementary guidance on the integration of human factors considerations into the licensing and regulatory aspects of digital upgrades. The report pays specific attention to the integration of principles described in NUREG-0711 (Human Factors Engineering Program Review Model) and how supplementary guidance can help to raise general awareness in the industry regarding the complexities of control room modernization projects created by many interdependent regulations, standards and guidelines. The report also describes how human factors engineering principles and methods provided by various resources and international standards can help in navigating through the process of licensing digital upgrades. In particular, the integration of human factors engineering guidance and requirements into the process of licensing digital upgrades can help reduce uncertainty related to development of technical bases for digital upgrades that will avoid the introduction of new failure modes.

  10. Patient safety - the role of human factors and systems engineering.

    Science.gov (United States)

    Carayon, Pascale; Wood, Kenneth E

    2010-01-01

    Patient safety is a global challenge that requires knowledge and skills in multiple areas, including human factors and systems engineering. In this chapter, numerous conceptual approaches and methods for analyzing, preventing and mitigating medical errors are described. Given the complexity of healthcare work systems and processes, we emphasize the need for increasing partnerships between the health sciences and human factors and systems engineering to improve patient safety. Those partnerships will be able to develop and implement the system redesigns that are necessary to improve healthcare work systems and processes for patient safety.

  11. Use of Computers in Human Factors Engineering

    Science.gov (United States)

    1974-11-01

    SENSES (PHYSIOLOGY), THERMOPLASTIC RESINS, VISUAL ACUITY (U)R RESEARCH CONCERNS DETERMINATION OF THE INFORMATION PRESENTATION REQUIREMENTS OF HUMAN DATA...THE GEOMETRY OF THE wORK STATION, IS CURRENTLY BEING DEVELOPED. IT IS CALLED COMBIMAN, AN ACRONYM FOR COMPUTERIZED BIOMECHANICAL MAN- MODELo COMBIMAN

  12. Human Factors Engineering and Ergonomics in Systems Engineering

    Science.gov (United States)

    Whitmore, Mihriban

    2017-01-01

    The study, discovery, and application of information about human abilities, human limitations, and other human characteristics to the design of tools, devices, machines, systems, job tasks and environments for effective human performance.

  13. Human Factors in Nuclear Power Engineering in Polish Conditions

    Directory of Open Access Journals (Sweden)

    Agnieszka Kaczmarek-Kacprzak

    2014-09-01

    Full Text Available The paper “Human factors in nuclear power engineering in Polish conditions” focuses on analysis of dynamics of preparing Polish society to build fi rst nuclear power plant in XXI century in Poland. Authors compare experience from constructing nuclear power plant Sizewell B (Great Britain and Sizewell C, which is in preparation phase with polish nuclear power program. Paper includes aspects e.g. of creating nuclear safety culture and social opinion about investment. Human factors in nuclear power engineering are as well important as relevant economical and technical factors, but very often negligible. In Poland where history about Czarnobyl is still alive, and social opinion is created on emotions after accident in Fukushima, human factors are crucial and should be under comprehensive consideration.

  14. Human Factors Engineering and School Furniture: A Circular Odyssey.

    Science.gov (United States)

    Lane, Kenneth E.; Richardson, Michael D.

    1993-01-01

    A search reveals only six articles that concern human-factors engineering as it relates to student furniture. Contacts with five school-furniture manufacturers disclose that designs were basically unaltered for years and are claimed to reflect what schools want in furniture. Proposes recommendations to design and secure furniture to meet students'…

  15. 2014 Space Human Factors Engineering Standing Review Panel

    Science.gov (United States)

    Steinberg, Susan

    2014-01-01

    The 2014 Space Human Factors Engineering (SHFE) Standing Review Panel (from here on referred to as the SRP) participated in a WebEx/teleconference with members of the Space Human Factors and Habitability (SHFH) Element, representatives from the Human Research Program (HRP), the National Space Biomedical Research Institute (NSBRI), and NASA Headquarters on November 17, 2014 (list of participants is in Section XI of this report). The SRP reviewed the updated research plans for the Risk of Incompatible Vehicle/Habitat Design (HAB Risk) and the Risk of Performance Errors Due to Training Deficiencies (Train Risk). The SRP also received a status update on the Risk of Inadequate Critical Task Design (Task Risk), the Risk of Inadequate Design of Human and Automation/Robotic Integration (HARI Risk), and the Risk of Inadequate Human-Computer Interaction (HCI Risk).

  16. Human factors engineering report for the cold vacuum drying facility

    Energy Technology Data Exchange (ETDEWEB)

    IMKER, F.W.

    1999-06-30

    The purpose of this report is to present the results and findings of the final Human Factors Engineering (HFE) technical analysis and evaluation of the Cold Vacuum Drying Facility (CVDF). Ergonomics issues are also addressed in this report, as appropriate. This report follows up and completes the preliminary work accomplished and reported by the Preliminary HFE Analysis report (SNF-2825, Spent Nuclear Fuel Project Cold Vacuum Drying Facility Human Factors Engineering Analysis: Results and Findings). This analysis avoids redundancy of effort except for ensuring that previously recommended HFE design changes have not affected other parts of the system. Changes in one part of the system may affect other parts of the system where those changes were not applied. The final HFE analysis and evaluation of the CVDF human-machine interactions (HMI) was expanded to include: the physical work environment, human-computer interface (HCI) including workstation and software, operator tasks, tools, maintainability, communications, staffing, training, and the overall ability of humans to accomplish their responsibilities, as appropriate. Key focal areas for this report are the process bay operations, process water conditioning (PWC) skid, tank room, and Central Control Room operations. These key areas contain the system safety-class components and are the foundation for the human factors design basis of the CVDF.

  17. Human factors engineering plan for reviewing nuclear plant modernization programs

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, John; Higgins, James [Brookhaven National Laboratory, Upton, NY (United States)

    2004-12-01

    The Swedish Nuclear Power Inspectorate reviews the human factors engineering (HFE) aspects of nuclear power plants (NPPs) involved in the modernization of the plant systems and control rooms. The purpose of a HFE review is to help ensure personnel and public safety by verifying that accepted HFE practices and guidelines are incorporated into the program and nuclear power plant design. Such a review helps to ensure the HFE aspects of an NPP are developed, designed, and evaluated on the basis of a structured top-down system analysis using accepted HFE principles. The review addresses eleven HFE elements: HFE Program Management, Operating Experience Review, Functional Requirements Analysis and Allocation, Task Analysis, Staffing, Human Reliability Analysis, Human-System Interface Design, Procedure Development, Training Program Development, Human Factors Verification and Validation, and Design Implementation.

  18. Human factors engineering checklists for application in the SAR process

    Energy Technology Data Exchange (ETDEWEB)

    Overlin, T.K.; Romero, H.A.; Ryan, T.G.

    1995-03-01

    This technical report was produced to assist the preparers and reviewers of the human factors portions of the SAR in completing their assigned tasks regarding analysis and/or review of completed analyses. The checklists, which are the main body of the report, and the subsequent tables, were developed to assist analysts in generating the needed analysis data to complete the human engineering analysis for the SAR. The technical report provides a series of 19 human factors engineering (HFE) checklists which support the safety analyses of the US Department of Energy`s (DOE) reactor and nonreactor facilities and activities. The results generated using these checklists and in the preparation of the concluding analyses provide the technical basis for preparing the human factors chapter, and subsequent inputs to other chapters, required by DOE as a part of the safety analysis reports (SARs). This document is divided into four main sections. The first part explains the origin of the checklists, the sources utilized, and other information pertaining to the purpose and scope of the report. The second part, subdivided into 19 sections, is the checklists themselves. The third section is the glossary which defines terms that could either be unfamiliar or have specific meanings within the context of these checklists. The final section is the subject index in which the glossary terms are referenced back to the specific checklist and page the term is encountered.

  19. 2015 Space Human Factors Engineering Standing Review Panel

    Science.gov (United States)

    Steinberg, Susan

    2015-01-01

    The 2015 Space Human Factors Engineering (SHFE) Standing Review Panel (from here on referred to as the SRP) met for a site visit in Houston, TX on December 2 - 3, 2015. The SRP reviewed the updated research plans for the Risk of Inadequate Design of Human and Automation/Robotic Integration (HARI Risk), the Risk of Inadequate Human-Computer Interaction (HCI Risk), and the Risk of Inadequate Mission, Process and Task Design (MPTask Risk). The SRP also received a status update on the Risk of Incompatible Vehicle/Habitat Design (Hab Risk) and the Risk of Performance Errors Due to Training Deficiencies (Train Risk). The SRP is pleased with the progress and responsiveness of the SHFE team. The presentations were much improved this year. The SRP is also pleased with the human-centered design approach. Below are some of the more extensive comments from the SRP. We have also made comments in each section concerning gaps/tasks in each. The comments below reflect more significant changes that impact more than just one particular section.

  20. Information Presentation: Human Research Program - Space Human Factors and Habitability, Space Human Factors Engineering Project

    Science.gov (United States)

    Holden, Kristina L.; Sandor, Aniko; Thompson, Shelby G.; Kaiser, Mary K.; McCann, Robert S.; Begault, D. R.; Adelstein, B. D.; Beutter, B. R.; Wenzel, E. M.; Godfroy, M.; Stone, L. S.

    2010-01-01

    The goal of the Information Presentation Directed Research Project (DRP) is to address design questions related to the presentation of information to the crew. The major areas of work, or subtasks, within this DRP are: 1) Displays, 2) Controls, 3) Electronic Procedures and Fault Management, and 4) Human Performance Modeling. This DRP is a collaborative effort between researchers atJohnson Space Center and Ames Research Center. T

  1. A Virtual Campus Based on Human Factor Engineering

    Science.gov (United States)

    Yang, Yuting; Kang, Houliang

    2014-01-01

    Three Dimensional or 3D virtual reality has become increasingly popular in many areas, especially in building a digital campus. This paper introduces a virtual campus, which is based on a 3D model of The Tourism and Culture College of Yunnan University (TCYU). Production of the virtual campus was aided by Human Factor and Ergonomics (HF&E), an…

  2. A Virtual Campus Based on Human Factor Engineering

    Science.gov (United States)

    Yang, Yuting; Kang, Houliang

    2014-01-01

    Three Dimensional or 3D virtual reality has become increasingly popular in many areas, especially in building a digital campus. This paper introduces a virtual campus, which is based on a 3D model of The Tourism and Culture College of Yunnan University (TCYU). Production of the virtual campus was aided by Human Factor and Ergonomics (HF&E), an…

  3. Experiences in the application of human factors engineering to human-system interface modernization

    Energy Technology Data Exchange (ETDEWEB)

    Trueba Alonso, Pedro; Fernandez Illobre, Luis; Ortega Pascual, Fernando [Tecnatom S.A., San Sebastian de los Reyes (Spain). Simulation and Control Rooms Div.

    2015-07-15

    Almost all the existing Nuclear Power Plants (NPPs) include plans to modernize their existing Instrumentation and Control (I and C) systems and associated Human System Interfaces (HSIs), due to obsolescence problems. Tecnatom, S.A. has been participating in modernization programs in NPPs to help them to plan, specify, design and implement the modernization of control rooms and associated I and C and HSIs. The application of Human Factors Engineering (HFE) in modernization programs is nowadays unavoidable. This is because is becoming a regulatory requirement, and also because it is needed to ensure that any plant modification, involving the modernization of I and C and HSI, is well designed to improve overall plant operations, reliability, and safety. This paper shows some experiences obtained during the application of HFE to the modernization of these HSIs. The experience applying HFE in modernizations and design modifications show a positive effect, improving the associated HSIs, with the acceptability of the final user.

  4. Using human factors engineering to improve the effectiveness of infection prevention and control.

    Science.gov (United States)

    Anderson, Judith; Gosbee, Laura Lin; Bessesen, Mary; Williams, Linda

    2010-08-01

    Human factors engineering is a discipline that studies the capabilities and limitations of humans and the design of devices and systems for improved performance. The principles of human factors engineering can be applied to infection prevention and control to study the interaction between the healthcare worker and the system that he or she is working with, including the use of devices, the built environment, and the demands and complexities of patient care. Some key challenges in infection prevention, such as delayed feedback to healthcare workers, high cognitive workload, and poor ergonomic design, are explained, as is how human factors engineering can be used for improvement and increased compliance with practices to prevent hospital-acquired infections.

  5. A HUMAN FACTORS ENGINEERING PROCESS TO SUPPORT HUMAN-SYSTEM INTERFACE DESIGN IN CONTROL ROOM MODERNIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Kovesdi, C.; Joe, J.; Boring, R.

    2017-05-01

    The primary objective of the United States (U.S.) Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) program is to sustain operation of the existing commercial nuclear power plants (NPPs) through a multi-pathway approach in conducting research and development (R&D). The Advanced Instrumentation, Information, and Control (II&C) System Technologies pathway conducts targeted R&D to address aging and reliability concerns with legacy instrumentation and control (I&C) and other information systems in existing U.S. NPPs. Control room modernization is an important part following this pathway, and human factors experts at Idaho National Laboratory (INL) have been involved in conducting R&D to support migration of new digital main control room (MCR) technologies from legacy analog and legacy digital I&C. This paper describes a human factors engineering (HFE) process that supports human-system interface (HSI) design in MCR modernization activities, particularly with migration of old digital to new digital I&C. The process described in this work is an expansion from the LWRS Report INL/EXT-16-38576, and is a requirements-driven approach that aligns with NUREG-0711 requirements. The work described builds upon the existing literature by adding more detail around key tasks and decisions to make when transitioning from HSI Design into Verification and Validation (V&V). The overall objective of this process is to inform HSI design and elicit specific, measurable, and achievable human factors criteria for new digital technologies. Upon following this process, utilities should have greater confidence with transitioning from HSI design into V&V.

  6. Intuitive engineering, human factors, and the design of future interfaces (Invited Paper)

    Science.gov (United States)

    Sampson, James B.

    2005-05-01

    Human factors engineering (HFE) professionals complain that they are often called in after-the-fact to help correct human interface problems. They believe many design flaws can be avoided if design teams involve them early on. However, in the case of innovative technology, such post hoc human factors may not be avoidable unless the inventor is also a human factors engineer or the prospective user. In rare cases an inventor of a new technology has an intuitive understanding of human engineering principles and knows well the capabilities and limitations of operators. This paper outlines the importance of focusing on the user-system interface and encouraging engineers to develop their own intuitive sense of users through mental imagery. If design engineers start with a clear mental picture of a specific user and task rather than generalities of use, fewer interface problems are likely to be encountered later in development. Successful technology innovators often use a visual thinking approach in the development of new concepts. Examples are presented to illustrate the successful application of intuitive design. An approach is offered on how designers can improve their non-verbal thinking skills. The author shares the view that the mission of HFE should not be to make system developers dependent on the small community of HF experts but rather to help them learn the value of applying user-centered design techniques.

  7. Draft audit report, human factors engineering control room design review: Saint Lucie Nuclear Power Plant, Unit No. 2

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, L.R.; Lappa, D.A.; Moore, J.W.

    1981-09-03

    A human factors engineering preliminary design review of the Saint Lucie Unit 2 control room was performed at the site on August 3 through August 7, 1981. This design review was carried out by a team from the Human Factors Engineering Branch, Division of Human Factors Safety. This report was prepared on the basis of the HFEB's review of the applicant's Preliminary Design Assessment and the human factors engineering design review/audit performed at the site. The review team included human factors consultants from BioTechnology, Inc., Falls Church, Virginia, and from Lawrence Livermore National Laboratory (University of California), Livermore, California.

  8. Human factors engineering for the TERF (Tritium Emissions Reduction Facility) project. [Tritium Emissions Reduction Facility

    Energy Technology Data Exchange (ETDEWEB)

    Hedley, W.H.; Adams, F.S. (EG and G Mound Applied Technologies, Miamisburg, OH (USA)); Wells, J.E. (Lawrence Livermore National Lab., CA (USA))

    1990-12-14

    The Tritium Emissions Reduction Facility (TERF) is being built by EG G Mound Applied Technologies to provide improved control of the tritium emissions from gas streams being processed. Mound handles tritium in connection with production, development, research, disassembly, recovery, and surveillance operations. During these operations, a small fraction of the tritium being processed escapes from its original containment. The objective of this report is to describe the human factors engineering as performed in connection with the design, construction, and testing of the TERF as required in DOE Order 6430.1A, section 1300-12. Human factors engineering has been involved at each step of the process and was considered during the preliminary research on tritium capture before selecting the specific process to be used. Human factors engineering was also considered in determining the requirements for the TERF and when the specific design work was initiated on the facility and the process equipment. Finally, human factors engineering was used to plan the specific acceptance tests that will be made during TERF installation and after its completion. These tests will verify the acceptability of the final system and its components. 16 refs., 8 figs.

  9. Human Research Program Space Human Factors Engineering (SHFE) Standing Review Panel (SRP)

    Science.gov (United States)

    Wichansky, Anna; Badler, Norman; Butler, Keith; Cummings, Mary; DeLucia, Patricia; Endsley, Mica; Scholtz, Jean

    2009-01-01

    The Space Human Factors Engineering (SHFE) Standing Review Panel (SRP) evaluated 22 gaps and 39 tasks in the three risk areas assigned to the SHFE Project. The area where tasks were best designed to close the gaps and the fewest gaps were left out was the Risk of Reduced Safety and Efficiency dire to Inadequate Design of Vehicle, Environment, Tools or Equipment. The areas where there were more issues with gaps and tasks, including poor or inadequate fit of tasks to gaps and missing gaps, were Risk of Errors due to Poor Task Design and Risk of Error due to Inadequate Information. One risk, the Risk of Errors due to Inappropriate Levels of Trust in Automation, should be added. If astronauts trust automation too much in areas where it should not be trusted, but rather tempered with human judgment and decision making, they will incur errors. Conversely, if they do not trust automation when it should be trusted, as in cases where it can sense aspects of the environment such as radiation levels or distances in space, they will also incur errors. This will be a larger risk when astronauts are less able to rely on human mission control experts and are out of touch, far away, and on their own. The SRP also identified 11 new gaps and five new tasks. Although the SRP had an extremely large quantity of reading material prior to and during the meeting, we still did not feel we had an overview of the activities and tasks the astronauts would be performing in exploration missions. Without a detailed task analysis and taxonomy of activities the humans would be engaged in, we felt it was impossible to know whether the gaps and tasks were really sufficient to insure human safety, performance, and comfort in the exploration missions. The SRP had difficulty evaluating many of the gaps and tasks that were not as quantitative as those related to concrete physical danger such as excessive noise and vibration. Often the research tasks for cognitive risks that accompany poor task or

  10. Human Factors Engineering and Ergonomics Analysis for the Canister Storage Building (CSB) Results and Findings

    Energy Technology Data Exchange (ETDEWEB)

    GARVIN, L.J.

    1999-09-20

    The purpose for this supplemental report is to follow-up and update the information in SNF-3907, Human Factors Engineering (HFE) Analysis: Results and Findings. This supplemental report responds to applicable U.S. Department of Energy Safety Analysis Report review team comments and questions. This Human Factors Engineering and Ergonomics (HFE/Erg) analysis was conducted from April 1999 to July 1999; SNF-3907 was based on analyses accomplished in October 1998. The HFE/Erg findings presented in this report and SNF-3907, along with the results of HNF-3553, Spent Nuclear Fuel Project, Final Safety Analysis Report, Annex A, ''Canister Storage Building Final Safety Analysis Report,'' Chapter A3.0, ''Hazards and Accidents Analyses,'' provide the technical basis for preparing or updating HNF-3553. Annex A, Chaptex A13.0, ''Human Factors Engineering.'' The findings presented in this report allow the HNF-3553 Chapter 13.0, ''Human Factors,'' to respond fully to the HFE requirements established in DOE Order 5480.23, Nuclear Safety Analysis Reports.

  11. Human Factors Engineering Requirements for the International Space Station - Successes and Challenges

    Science.gov (United States)

    Whitmore, M.; Blume, J.

    2003-01-01

    Advanced technology coupled with the desire to explore space has resulted in increasingly longer human space missions. Indeed, any exploration mission outside of Earth's neighborhood, in other words, beyond the moon, will necessarily be several months or even years. The International Space Station (ISS) serves as an important advancement toward executing a successful human space mission that is longer than a standard trip around the world or to the moon. The ISS, which is a permanently occupied microgravity research facility orbiting the earth, will support missions four to six months in duration. In planning for the ISS, the NASA developed an agency-wide set of human factors standards for the first time in a space exploration program. The Man-Systems Integration Standard (MSIS), NASA-STD-3000, a multi-volume set of guidelines for human-centered design in microgravity, was developed with the cooperation of human factors experts from various NASA centers, industry, academia, and other government agencies. The ISS program formed a human factors team analogous to any major engineering subsystem. This team develops and maintains the human factors requirements regarding end-to-end architecture design and performance, hardware and software design requirements, and test and verification requirements. It is also responsible for providing program integration across all of the larger scale elements, smaller scale hardware, and international partners.

  12. Human Factors for Clinical Engineering - The Realization of a Guidance Text

    Institute of Scientific and Technical Information of China (English)

    A C Easty; A L Cassano-Pich; M Griffin; Y-L Lin; P Trbovich

    2016-01-01

    Industries such as aviation and nuclear power have greatly improved their safety performance through the application of human factors methods to the design, development, selection and deployment of a range of technologies and work processes. Health care safety performance generally lags behind these industries and would benefit from a similar application of human factors methods. Clinical engineers are in an ideal position to acquire and apply this human factors knowledge, and lead its adoption in health care. This paper describes a text that has been written speciifcally for clinical engineers and others who design, develop, select and support the use of health care technologies, to enable them to learn the key methods of human factors and adopt them as part of their ongoing work. Early indications are that these approaches help to ensure that health care technologies are used more safely and effectively, and it is hoped that large-scale adoption will result in a noticeable and worthwhile improvement in overall health care safety. The described text is now ready and has been published in English on the IFMBE website. It is available as a free download in PDF format. Clinical engineers and others working around the world in the area of health technology are encouraged to learn and adopt these methods, and use them as appropriate in their local setting. At time of writing, plans are underway for a translation of this book into Spanish. Once completed, this version will also be made available online at no charge. The authors encourage readers to contact them with their experiences, and the aim is to build a worldwide community that gradually adopts these methods and helps to drive safety improvements in health care.

  13. Applications of human factors engineering to LNG release prevention and control

    Energy Technology Data Exchange (ETDEWEB)

    Shikiar, R.; Rankin, W.L.; Rideout, T.B.

    1982-06-01

    The results of an investigation of human factors engineering and human reliability applications to LNG release prevention and control are reported. The report includes a discussion of possible human error contributions to previous LNG accidents and incidents, and a discussion of generic HF considerations for peakshaving plants. More specific recommendations for improving HF practices at peakshaving plants are offered based on visits to six facilities. The HF aspects of the recently promulgated DOT regulations are reviewed, and recommendations are made concerning how these regulations can be implemented utilizing standard HF practices. Finally, the integration of HF considerations into overall system safety is illustrated by a presentation of human error probabilities applicable to LNG operations and by an expanded fault tree analysis which explicitly recognizes man-machine interfaces.

  14. Cognitive work analysis: An influential legacy extending beyond human factors and engineering.

    Science.gov (United States)

    Naikar, Neelam

    2017-03-01

    Jens Rasmussen's multifaceted legacy includes cognitive work analysis (CWA), a framework for the analysis, design, and evaluation of complex sociotechnical systems. After considering the framework's origins, this paper reviews its progress, predictably covering experimental research on ecological interface design, case studies of the application of CWA to human factors and engineering problems in industry, and methods and modelling tools for CWA. Emphasis is placed, however, on studying the nexus between some of the recent results obtained with CWA and the original field studies of human problem-solving that motivated the framework's development. Of particular interest is a case study of the use of CWA for military doctrine development, a problem commonly regarded as lying outside the fields of human factors and engineering. It is concluded that the value of CWA, even for such diverse problems, is likely to result from its conceptual grounding in empirical observations of patterns of human reasoning in complex systems. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  15. Ergonomics and human factors: the paradigms for science, engineering, design, technology and management of human-compatible systems.

    Science.gov (United States)

    Karwowski, W

    2005-04-15

    This paper provides a theoretical perspective on human factors and ergonomics (HFE), defined as a unique and independent discipline that focuses on the nature of human-artefact interactions, viewed from the unified perspective of the science, engineering, design, technology and management of human-compatible systems. Such systems include a variety of natural and artificial products, processes and living environments. The distinguishing features of the contemporary HFE discipline and profession are discussed and a concept of ergonomics literacy is proposed. An axiomatic approach to ergonomics design and a universal measure of system-human incompatibility are also introduced. It is concluded that the main focus of the HFE discipline in the 21st century will be the design and management of systems that satisfy human compatibility requirements.

  16. NRC Reviewer Aid for Evaluating the Human Factors Engineering Aspects of Small Modular Reactors

    Energy Technology Data Exchange (ETDEWEB)

    OHara J. M.; Higgins, J.C.

    2012-01-13

    Small modular reactors (SMRs) are a promising approach to meeting future energy needs. Although the electrical output of an individual SMR is relatively small compared to that of typical commercial nuclear plants, they can be grouped to produce as much energy as a utility demands. Furthermore, SMRs can be used for other purposes, such as producing hydrogen and generating process heat. The design characteristics of many SMRs differ from those of current conventional plants and may require a distinct concept of operations (ConOps). The U.S. Nuclear Regulatory Commission (NRC) conducted research to examine the human factors engineering (HFE) and the operational aspects of SMRs. The research identified thirty potential human-performance issues that should be considered in the NRC's reviews of SMR designs and in future research activities. The purpose of this report is to support NRC HFE reviewers of SMR applications by identifying some of the questions that can be asked of applicants whose designs have characteristics identified in the issues. The questions for each issue were identified and organized based on the review elements and guidance contained in Chapter 18 of the Standard Review Plan (NUREG-0800), and the Human Factors Engineering Program Review Model (NUREG-0711).

  17. Human Factors Engineering (HFE) insights for advanced reactors based upon operating experience

    Energy Technology Data Exchange (ETDEWEB)

    Higgins, J.; Nasta, K.

    1997-01-01

    The NRC Human Factors Engineering Program Review Model (HFE PRM, NUREG-0711) was developed to support a design process review for advanced reactor design certification under 10CFR52. The HFE PRM defines ten fundamental elements of a human factors engineering program. An Operating Experience Review (OER) is one of these elements. The main purpose of an OER is to identify potential safety issues from operating plant experience and ensure that they are addressed in a new design. Broad-based experience reviews have typically been performed in the past by reactor designers. For the HFE PRM the intent is to have a more focussed OER that concentrates on HFE issues or experience that would be relevant to the human-system interface (HSI) design process for new advanced reactors. This document provides a detailed list of HFE-relevant operating experience pertinent to the HSI design process for advanced nuclear power plants. This document is intended to be used by NRC reviewers as part of the HFE PRM review process in determining the completeness of an OER performed by an applicant for advanced reactor design certification. 49 refs.

  18. DEVELOPMENT OF HUMAN FACTORS ENGINEERING GUIDANCE FOR SAFETY EVALUATIONS OF ADVANCED REACTORS.

    Energy Technology Data Exchange (ETDEWEB)

    O' HARA, J.; PERSENSKY, J.; SZABO, A.

    2006-10-01

    Advanced reactors are expected to be based on a concept of operations that is different from what is currently used in today's reactors. Therefore, regulatory staff may need new tools, developed from the best available technical bases, to support licensing evaluations. The areas in which new review guidance may be needed and the efforts underway to address the needs will be discussed. Our preliminary results focus on some of the technical issues to be addressed in three areas for which new guidance may be developed: automation and control, operations under degraded conditions, and new human factors engineering methods and tools.

  19. Human Factors Engineering. A Self-Paced Text, Lessons 6-10,

    Science.gov (United States)

    1981-08-01

    saga of his super chopper. Eager presented to the manager some of the very problems you’ve had to deal with in the last several lessons. Their talk...in the continuing saga (soap opera?) of I. M. Eager. As you recall from the last few lessons, Eager was dreaming that he had de- signed a perfect...importance of some of the things Captain B. Smart had been saying about Human Factors Engineering. As twilight set in, Eager realized that in lis rush to

  20. Human-factors engineering for smart transport: design support for car drivers and train traffic controllers.

    Science.gov (United States)

    Lenior, Dick; Janssen, Wiel; Neerincx, Mark; Schreibers, Kirsten

    2006-07-01

    The theme Smart Transport can be described as adequate human-system symbiosis to realize effective, efficient and human-friendly transport of goods and information. This paper addresses how to attune automation to human (cognitive) capacities (e.g. to take care of information uncertainty, operator trust and mutual man-machine adaptations). An introduction to smart transport is presented, including examples of best practice for engineering human factors in the vehicle ergonomics and train traffic control domain. The examples are representative of an ongoing trend in automation and they show how the human role changes from controller to supervisor. Section 2 focuses on the car driver and systems that support, or sometimes even take over, critical parts of the driving task. Due to the diversity of driver ability, driving context and dependence between driver and context factors, there is a need for personalised, adaptive and integrated support. Systematic research is needed to establish sound systems. Section 3 focuses on the train dispatcher support systems that predict train movements, detect potential conflicts and show the dispatcher the possibilities available to solve the detected problems. Via thorough analysis of both the process to be controlled and the dispatcher's tasks and cognitive needs, support functions were developed as part of an already very complex supervision and control system. The two examples, although from a different field, both show the need for further development in cognitive modelling as well as for the value of sound ergonomics task analysis in design practice.

  1. Human factors engineering in healthcare systems: the problem of human error and accident management.

    Science.gov (United States)

    Cacciabue, P C; Vella, G

    2010-04-01

    This paper discusses some crucial issues associated with the exploitation of data and information about health care for the improvement of patient safety. In particular, the issues of human factors and safety management are analysed in relation to exploitation of reports about non-conformity events and field observations. A methodology for integrating field observation and theoretical approaches for safety studies is described. Two sample cases are discussed in detail: the first one makes reference to the use of data collected in the aviation domain and shows how these can be utilised to define hazard and risk; the second one concerns a typical ethnographic study in a large hospital structure for the identification of most relevant areas of intervention. The results show that, if national authorities find a way to harmonise and formalize critical aspects, such as the severity of standard events, it is possible to estimate risk and define auditing needs, well before the occurrence of serious incidents, and to indicate practical ways forward for improving safety standards.

  2. Human serum provided additional values in growth factors supplemented medium for human chondrocytes monolayer expansion and engineered cartilage construction.

    Science.gov (United States)

    Chua, K H; Aminuddin, B S; Fuzina, N H; Ruszymah, B H I

    2004-05-01

    We have previously formulated an optimized human chondrocytes growth medium based on 2% fetal bovine serum supplementation. For clinical usage, the animal serum must be replaced by patient own serum. We investigated the effects of human serum concentration for human nasal septum chondrocytes monolayer culture and cartilage reconstruction. Human serum demonstrated a dose dependent manner in promoting chondrocytes growth and cartilage engineering.

  3. Three-dimensional computer-aided human factors engineering analysis of a grafting robot.

    Science.gov (United States)

    Chiu, Y C; Chen, S; Wu, G J; Lin, Y H

    2012-07-01

    The objective of this research was to conduct a human factors engineering analysis of a grafting robot design using computer-aided 3D simulation technology. A prototype tubing-type grafting robot for fruits and vegetables was the subject of a series of case studies. To facilitate the incorporation of human models into the operating environment of the grafting robot, I-DEAS graphic software was applied to establish individual models of the grafting robot in line with Jack ergonomic analysis. Six human models (95th percentile, 50th percentile, and 5th percentile by height for both males and females) were employed to simulate the operating conditions and working postures in a real operating environment. The lower back and upper limb stresses of the operators were analyzed using the lower back analysis (LBA) and rapid upper limb assessment (RULA) functions in Jack. The experimental results showed that if a leg space is introduced under the robot, the operator can sit closer to the robot, which reduces the operator's level of lower back and upper limbs stress. The proper environmental layout for Taiwanese operators for minimum levels of lower back and upper limb stress are to set the grafting operation at 23.2 cm away from the operator at a height of 85 cm and with 45 cm between the rootstock and scion units.

  4. Updating Human Factors Engineering Guidelines for Conducting Safety Reviews of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    O, J.M.; Higgins, J.; Stephen Fleger - NRC

    2011-09-19

    The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) programs of applicants for nuclear power plant construction permits, operating licenses, standard design certifications, and combined operating licenses. The purpose of these safety reviews is to help ensure that personnel performance and reliability are appropriately supported. Detailed design review procedures and guidance for the evaluations is provided in three key documents: the Standard Review Plan (NUREG-0800), the HFE Program Review Model (NUREG-0711), and the Human-System Interface Design Review Guidelines (NUREG-0700). These documents were last revised in 2007, 2004 and 2002, respectively. The NRC is committed to the periodic update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool. To this end, the NRC is updating its guidance to stay current with recent research on human performance, advances in HFE methods and tools, and new technology being employed in plant and control room design. This paper describes the role of HFE guidelines in the safety review process and the content of the key HFE guidelines used. Then we will present the methodology used to develop HFE guidance and update these documents, and describe the current status of the update program.

  5. Human-factors engineering control-room design review/audit: Waterford 3 SES Generating Station, Louisiana Power and Light Company

    Energy Technology Data Exchange (ETDEWEB)

    Savage, J.W.

    1983-03-10

    A human factors engineering design review/audit of the Waterford-3 control room was performed at the site on May 10 through May 13, 1982. The report was prepared on the basis of the HFEB's review of the applicant's Preliminary Human Engineering Discrepancy (PHED) report and the human factors engineering design review performed at the site. This design review was carried out by a team from the Human Factors Engineering Branch, Division of Human Factors Safety. The review team was assisted by consultants from Lawrence Livermore National Laboratory (University of California), Livermore, California.

  6. Human Factors Engineering in Designing the Passengers' Cockpit of the Malaysian Commercial Suborbital Spaceplane

    Science.gov (United States)

    Ridzuan Zakaria, Norul; Mettauer, Adrian; Abu, Jalaluddin; Hassan, Mohd Roshdi; Ismail, Anwar Taufeek; Othman, Jamaluddin; Shaari, Che Zhuhaida; Nasron, Nasri

    2010-09-01

    The design of the passengers’ cabin or cockpit of commercial suborbital spaceplane is a new and exciting frontier in human factors engineering, which emphasizes on comfort and safety. There is a program to develop small piloted 3 seats commercial suborbital spaceplane by a group of Malaysians with their foreign partners, and being relatively small and due to its design philosophy, the spaceplane does not require a cabin, but only a cockpit for its 2 passengers. In designing the cockpit, human factors engineering and safety principles are given priority. The cockpit is designed with the intention to provide comfort and satisfaction to the passengers without compromising the safety, in such a way that there are passenger-view wide angled video camera to observe the passengers at all time in flight, “rear-view”, “under-the-floor-view” and “fuselage-view” video cameras for the passengers, personalized gauges and LCDs on the dashboard to provide vital and useful information during the flight to the passengers, and biomedical engineered products which not only entertain the passengers, but also provide important information on the passengers to the ground crews who are responsible in the comfort and safety of the passengers. The passenger-view video-camera, which record the passengers with Earth visible through the glass canopy as the background, not only provides live visual of the passengers for safety reason, but also provide the most preferred memorable video collection for the passengers, while other video cameras provide the opportunity to view at various angles from unique positions to both the passengers and the ground observers. The gauges and LCDs on the dashboard provide access to the passengers to information such as the gravity, orientation, rate of climb and flight profile of the spaceplane, graphical presentation of the spaceplane in flight, and live video from the onboard video cameras. There is also a control stick for each passenger to

  7. Human factors engineering in oil and gas--a review of industry guidance.

    Science.gov (United States)

    Robb, Martin; Miller, Gerald

    2012-01-01

    Oil and gas exploration and production activities are carried out in hazardous environments in many parts of the world. Recent events in the Gulf of Mexico highlight those risks and underline the importance of considering human factors during facility design. Ergonomic factors such as machinery design, facility and accommodation layout and the organization of work activities have been systematically considered over the past twenty years on a limited number of offshore facility design projects to a) minimize the occupational risks to personnel, b) support operations and maintenance tasks and c) improve personnel wellbeing. During this period, several regulators and industry bodies such as the American Bureau of Shipping (ABS), the American Society of Testing and Materials (ASTM), the UK's Health and Safety Executive (HSE), Oil and Gas Producers (OGP), and Norway's Petroleum Safety Authority (PSA) have developed specific HFE design standards and guidance documents for the application of Human Factors Engineering (HFE) to the design and operation of Oil and Gas projects. However, despite the existence of these guidance and recommended design practise documents, and documented proof of their value in enhancing crew safety and efficiency, HFE is still not well understood across the industry and application across projects is inconsistent. This paper summarizes the key Oil and Gas industry bodies' HFE guidance documents, identifies recurring themes and current trends in the use of these standards, provides examples of where and how these HFE standards have been used on past major offshore facility design projects, and suggests criteria for selecting the appropriate HFE strategy and tasks for future major oil and gas projects. It also provides a short history of the application of HFE to the offshore industry, beginning with the use of ASTM F 1166 to a major operator's Deepwater Gulf of Mexico facility in 1990 and the application of HFE to diverse world regions. This

  8. A human factors engineering evaluation of the Multi-Function Waste Tank Facility. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Donohoo, D.T. [Pacific Northwest Lab., Richland, WA (United States); Sarver, T.L. [ARES Corp., San Francisco, CA (United States)

    1995-06-05

    This report documents the methods and results of a human factors engineering (HFE) review conducted on the Multi-Function Waste Tank Facility (MWTF), Westinghouse Hanford Company (WHC) Project 236A, to be constructed at the U.S. Department of Energy (DOE) facility at Hanford, Washington. This HFE analysis of the MWTF was initiated by WHC to assess how well the current facility and equipment design satisfies the needs of its operations and maintenance staff and other potential occupants, and to identify areas of the design that could benefit from improving the human interfaces at the facility. Safe and effective operations, including maintenance, is a primary goal for the MWTF. Realization of this goal requires that the MWTF facility, equipment, and operations be designed in a manner that is consistent with the abilities and limitations of its operating personnel. As a consequence, HFE principles should be applied to the MWTF design, construction, its operating procedures, and its training. The HFE review was focused on the 200-West Area facility as the design is further along than that of the 200-East Area. The review captured, to the greatest extent feasible at this stage of design, all aspects of the facility activities and included the major topics generally associated with HFE (e.g., communication, working environment). Lessons learned from the review of the 200 West facility will be extrapolated to the 200-East Area, as well as generalized to the Hanford Site.

  9. Advanced human-system interface design review guideline. Evaluation procedures and guidelines for human factors engineering reviews

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.M.; Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Baker, C.C.; Welch, D.L.; Granda, T.M.; Vingelis, P.J. [Carlow International Inc., Falls Church, VA (United States)

    1994-07-01

    Advanced control rooms will use advanced human-system interface (HSI) technologies that may have significant implications for plant safety in that they will affect the operator`s overall role in the system, the method of information presentation, and the ways in which operators interact with the system. The U.S. Nuclear Regulatory Commission (NRC) reviews the HSI aspects of control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported to protect public health and safety. The principal guidance available to the NRC, however, was developed more than ten years ago, well before these technological changes. Accordingly, the human factors guidance needs to be updated to serve as the basis for NRC review of these advanced designs. The purpose of this project was to develop a general approach to advanced HSI review and the human factors guidelines to support. NRC safety reviews of advanced systems. This two-volume report provides the results of the project. Volume I describes the development of the Advanced HSI Design Review Guideline (DRG) including (1) its theoretical and technical foundation, (2) a general model for the review of advanced HSIs, (3) guideline development in both hard-copy and computer-based versions, and (4) the tests and evaluations performed to develop and validate the DRG. Volume I also includes a discussion of the gaps in available guidance and a methodology for addressing them. Volume 2 provides the guidelines to be used for advanced HSI review and the procedures for their use.

  10. Human Factors engineering criteria and design for the Hanford Waste Vitrification Plant preliminary safety analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Wise, J.A.; Schur, A.; Stitzel, J.C.L.

    1993-09-01

    This report provides a rationale and systematic methodology for bringing Human Factors into the safety design and operations of the Hanford Waste Vitrification Plant (HWVP). Human Factors focuses on how people perform work with tools and machine systems in designed settings. When the design of machine systems and settings take into account the capabilities and limitations of the individuals who use them, human performance can be enhanced while protecting against susceptibility to human error. The inclusion of Human Factors in the safety design of the HWVP is an essential ingredient to safe operation of the facility. The HWVP is a new construction, nonreactor nuclear facility designed to process radioactive wastes held in underground storage tanks into glass logs for permanent disposal. Its design and mission offer new opposites for implementing Human Factors while requiring some means for ensuring that the Human Factors assessments are sound, comprehensive, and appropriately directed.

  11. Implementation Pilot Project in Human Factors Engineering ENUSA; Proyecto Piloto Implantacion de Facores Humanos en Ingenieria de ENUSA

    Energy Technology Data Exchange (ETDEWEB)

    Choithramani Becerra, S.

    2013-07-01

    In this paper the analysis of an engineering project of the Technology and Commercial Fuel ENUSA called Designing a 5PWR reload from the point of view of Human Factors described. The study was conducted by analyzing error precursors and barriers, observation techniques, interviews and the methodology for risk analysis. Similarly, the tools applied and the results obtained are described in this paper.

  12. Management of human factors engineering-associated hemochromatosis: A 2015 update.

    Science.gov (United States)

    Sivakumar, Menaka; Powell, Lawrie W

    2016-03-18

    This review focuses on the management of iron metabolism and iron overload experienced in the hereditary condition, human factors engineering (HFE)-associated hemochromatosis. Hemochromatosis refers to a group of genetic diseases that result in iron overload; the major one globally is HFE-associated hemochromatosis. The evolution in understanding of the most common form of hereditary hemochromatosis, being the substation of cysteine to a tyrosine at position 282 in the HFE gene, has been extensively studied Novel mutations in both HFE and non-HFE genes have been indicated in this disease which hold significance in its application for the Asia-Pacific region. In conditions with iron overload, the storage of excess iron in various body tissues leads to complications and toxic damage. The most common presenting complaint for this disease is malaise, lethargy and other non-specific symptoms. In order to diagnose hereditary hemochromatosis, there are biochemical, imaging and genetic testing options. Currently, cascade screening of affected families is preferred over population-level screening. The mainstay of treatment is venesection and the appropriate approach to treatment has been consolidated over the years. Recently, the indications for venesection therapy of hemochromatosis have been challenged and are the subject of ongoing research.

  13. Management of human factors engineering-associated hemochromatosis: A 2015 update

    Institute of Scientific and Technical Information of China (English)

    Menaka; Sivakumar; Lawrie; W; Powell

    2016-01-01

    This review focuses on the management of iron metabolism and iron overload experienced in the hereditary condition, human factors engineering(HFE)-associated hemochromatosis. Hemochromatosis refers to a group of genetic diseases that result in iron overload; the major one globally is HFE-associated hemochromatosis. The evolution in understanding of the most common form of hereditary hemochromatosis, being the substation of cysteine to a tyrosine at position 282 in the HFE gene, has been extensively studied Novel mutations in both HFE and non-HFE genes have been indicated in this disease which hold significance in its application for the Asia-Pacific region. In conditions with iron overload, the storage of excess iron in various body tissues leads to complications and toxic damage. The most common presenting complaint for this disease is malaise, lethargy and other non-specific symptoms. In order to diagnose hereditary hemochromatosis, there are biochemical, imaging and genetic testing options. Currently, cascade screening of affected families is preferred over population-level screening. The mainstay of treatment is venesection and the appropriate approach to treatment has been consolidated over the years. Recently, the indications for venesection therapy of hemochromatosis have been challenged and are the subject of ongoing research.

  14. Tissue engineering of urethra using human vascular endothelial growth factor gene-modified bladder urothelial cells.

    Science.gov (United States)

    Guan, Yong; Ou, Lailiang; Hu, Gang; Wang, Hongjun; Xu, Yong; Chen, Jiatong; Zhang, Jun; Yu, Yaoting; Kong, Deling

    2008-02-01

    Acquired or congenital abnormalities may lead to urethral damage or loss, often requiring surgical reconstruction. Urethrocutaneous fistula and strictures are common complications, due to inadequate blood supply. Thus, adequate blood supply is a key factor for successful urethral tissue reconstruction. In this study, urethral grafts were prepared by seeding rabbit bladder urothelial cells (UCs) modified with human vascular endothelial growth factor (VEGF(165)) gene in the decellularized artery matrix. A retroviral pMSCV-VEGF(165)-GFP vector was cloned by insertion of VEGF open reading frame into the vector pMSCV-GFP (murine stem cell virus [MSCV]; green fluorescent protein [GFP]). Retrovirus was generated using package cell line 293T. Rabbit UCs were expanded ex vivo and modified with either MSCV-VEGF(165)-GFP or control MSCV-GFP retrovirus. Transduction efficiency was analyzed by fluorescence-activated cell sorting. The expression of VEGF(165) was examined by immunofluorescence, reverse transcript-polymerase chain reaction, Western blot, and enzyme-linked immunosorbent assay (ELISA). Decellularized rabbit artery matrix was seeded with genetically modified UCs and was subsequently cultured for 1 week prior to subcutaneous implantation into nude mice. Four weeks after implantation, the implants were harvested and analyzed by fluorescence microscopy, and by histologic and immunohistochemical staining. Ex vivo transduction efficiency of UCs was greater than 50% when concentrated retrovirus was used. The modified cells expressed both VEGF and GFP protein. Furthermore, the VEGF-modified UCs secreted VEGF in a time-dependent manner. Scanning electron microscopy and histochemical analysis of cross sections of the cultured urethral grafts showed that the seeded cells were attached and proliferated on the luminal surface of the decellularized artery matrix. In the subcutaneously implanted vessels, VEGF-modified cells significantly enhanced neovascularization and the

  15. A Review on the Regulatory Strategy of Human Factors Engineering Consideration in Pakistan Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Sohail, Sabir [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Choi, Seong Nam [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2013-10-15

    In this paper, the legal and regulatory infrastructure available in Pakistan for HFE requirements is assessed, and the methodology for strengthening of legal infrastructure is presented. The regulatory strategy on evaluation of HFE consideration should provide reviewers with guidance on review process. Therefore, the suggested methodology is based on preparation of guidance documents such as checklist, working procedures, S and Gs etc.; incorporation of PRM elements in regulatory system; and finally the development of PRM implementation criteria. Altogether, the scheme provide the enhancement in regulatory infrastructure and also the effective and efficient review process. The Three Mile Island (TMI) accident brought the general consensus among the nuclear community on the integration of human factors engineering (HFE) principles in all phases of nuclear power. This notion has further strengthened after the recent Fukushima nuclear accident. Much effort has been put over to incorporate the lesson learned and continuous technical evolution on HFE to device different standards. The total of 174 ergonomics standards are alone identified by Dul et al. (2004) published by International Organization for Standardization (ISO) and the European Committee for Standardization (CEN) and number of standards and HFE guidelines (S and Gs) are also published by organizations like Institute for Electrical and Electronics Engineering (IEEE), International Electrotechnical Commission (IEC), International Atomic Energy Agency (IAEA), United States Nuclear Regulatory Commission (USNRC), etc. The ambition of effective review on HFE integration in nuclear facility might be accomplished through the development of methodology for systematic implementation of S and Gs. Such kind of methodology would also be beneficial for strengthening the regulatory framework and practices for countries new in the nuclear arena and with small scale nuclear program. The objective of paper is to review the

  16. Implications of the new Food and Drug Administration draft guidance on human factors engineering for diabetes device manufacturers.

    Science.gov (United States)

    Wilcox, Stephen B; Drucker, Daniel

    2012-03-01

    This article discusses the implications of the new Food and Drug Administration's draft guidance on human factors and usability engineering for the development of diabetes-related devices. Important considerations include the challenge of identifying users, when the user population is so dramatically broad, and the challenge of identifying use environments when the same can be said for use environments. Another important consideration is that diabetes-related devices, unlike many other medical devices, are used constantly as part of the user's lifestyle--adding complexity to the focus on human factors and ease of use emphasized by the draft guidance.

  17. Human Factors Engineering Data Base Development for Armored Combat Vehicles and Analyses of Three NATO Tank Systems. Volume 3. Human Factors Engineering Analysis of the British Chieftain Main Battle Tank.

    Science.gov (United States)

    1986-07-03

    Commander’s Hatch nure -’. ommanoer- ; ar.cn. Haiter Handle. ind Comnat .-cc:, - .. .. m - . . . . ° : - THE BDM CORPORATION BDM/ABQ-86-0608-TR U 23 inches...3, 1986 8 0MIABQ-86-0608-TR I 86 8 7 089 Smm • ’ THE BDM CORPORATION 1801 Randoiph Road, S.E, Albuquerque, NM 87106 0 (505) 848-5000 _ _. I. * HUMAN...5 % 5-| THE BDM CORPORATION BDM/ABQ-86-O608-TR TABLE OF CONTENTSR Chapter Page I HUMAN FACTORS ENGINEERING ANALYSIS OF THE BRITISH CHIEFTAIN MAIN

  18. Understanding human factors in rail engineering: re-analysis of detailed, qualitative data on functions and risks.

    Science.gov (United States)

    Ryan, Brendan; Wilsona, John R; Schock, Alex

    2012-01-01

    The paper reports on the review and re-analysis of information that has been collected in earlier field studies on the functions and associated risks in rail engineering and maintenance. Two methods of Cognitive Work Analysis have been adapted and used to identify and represent important components of the rail engineering system and the situations in which activities occur. Additional classification exercises have been used to determine issues of strategic importance to the organisation, related to the functions and human factors risks in performing these functions. The effectiveness of the methods in this industrial context has been evaluated. Conclusions are drawn on how this type of approach can be used to produce relevant findings on the following: What the organisation knows about roles, functions and descriptions of tasks that are relevant for engineering and maintenance work; (2) the HF risks for today's (and unless things change), tomorrow's railway; (3) how this knowledge can help in determining organisational priorities for future work.

  19. Insulin-like growth factor I enhances collagen synthesis in engineered human tendon tissue

    DEFF Research Database (Denmark)

    Herchenhan, Andreas; Bayer, Monika L.; Eliasson, Pernilla

    2015-01-01

    OBJECTIVE: Isolated human tendon cells form 3D tendon constructs that demonstrate collagen fibrillogenesis and feature structural similarities to tendon when cultured under tensile load. The exact role of circulating growth factors for collagen formation in tendon is sparsely examined. We...

  20. Latent Transforming Growth Factor-beta1 Functionalised Electrospun Scaffolds Promote Human Cartilage Differentiation: Towards an Engineered Cartilage Construct

    Directory of Open Access Journals (Sweden)

    Erh-Hsuin Lim

    2013-11-01

    Full Text Available BackgroundTo overcome the potential drawbacks of a short half-life and dose-related adverse effects of using active transforming growth factor-beta 1 for cartilage engineering, a cell-mediated latent growth factor activation strategy was developed incorporating latent transforming growth factor-β1 (LTGF into an electrospun poly(L-lactide scaffold.MethodsThe electrospun scaffold was surface modified with NH3 plasma and biofunctionalised with LTGF to produce both random and orientated biofunctionalised electrospun scaffolds. Scaffold surface chemical analysis and growth factor bioavailability assays were performed. In vitro biocompatibility and human nasal chondrocyte gene expression with these biofunctionalised electrospun scaffold templates were assessed. In vivo chondrogenic activity and chondrocyte gene expression were evaluated in athymic rats.ResultsChemical analysis demonstrated that LTGF anchored to the scaffolds was available for enzymatic, chemical and cell activation. The biofunctionalised scaffolds were non-toxic. Gene expression suggested chondrocyte re-differentiation after 14 days in culture. By 6 weeks, the implanted biofunctionalised scaffolds had induced highly passaged chondrocytes to re-express Col2A1 and produce type II collagen.ConclusionsWe have demonstrated a proof of concept for cell-mediated activation of anchored growth factors using a novel biofunctionalised scaffold in cartilage engineering. This presents a platform for development of protein delivery systems and for tissue engineering.

  1. Defense of Defense Human Factors Engineering Technical Advisory Group Meeting Summary

    Science.gov (United States)

    2012-07-01

    Survivability ( Plaga ) • Wright, N; OSD and DSOC Helicopter Seating Studies Zehner, G; An Overview of USAF Anthropometry Plaga , J & Hill; SAFE Association...predictions. – 1230 - 1430 Standardization - 1472H (Poston) – 1230 - 1430 Human Factors in Extreme Environments & SS ( Plaga ) • Ganey, HCN...Classification (Personnel) LT Chris Foster Dr. Hector Acosta System Safety/Health Hazards/ Survivability (SS/HH/Sv) Mr. John Plaga Technical Society

  2. Engineering the substrate and inhibitor specificities of human coagulation Factor VIIa

    DEFF Research Database (Denmark)

    Larsen, Katrine S; Østergaard, Henrik; Bjelke, Jais R;

    2007-01-01

    of the selective active site in defining specificity. Being a trypsin-like serine protease, FVIIa had P1 specificity exclusively towards arginine and lysine residues. In the S2 pocket, threonine, leucine, phenylalanine and valine residues were the most preferred amino acids. Both S3 and S4 appeared to be rather...... promiscuous, however, with some preference for aromatic amino acids at both positions. Interestingly, a significant degree of interdependence between the S3 and S4 was observed and, as a consequence, the optimal substrate for FVIIa could not be derived directly from a subsite-directed specificity screen...... for FVIIa by marked changes in primary substrate specificity and decreased rates of antithrombin III inhibition. Interestingly, these changes do not necessarily coincide with an altered ability to activate Factor X, demonstrating that inhibitor and macromolecular substrate selectivity may be engineered...

  3. The Human Factors Engineering in Process Design Modifications CNAT; La Ingenieria de Factores Humanos en el Proceso de Modificaciones de diseno de CNAT

    Energy Technology Data Exchange (ETDEWEB)

    Foronda Delgado, A.; Almeida Parra, P.; Bote Moreno, J.

    2013-07-01

    This contribution presents the process followed at the Almaraz and Trillo Nuclear Power Plants in order to integrate Human Factors Engineering (HFE) in the Design Modifications. This includes the applicable rules and regulations, the classification criteria used to categorize the modification, the activities that are to be carried out in each case, as well as recent examples where the full HFE program model was applied at Almaraz (Alternate Shutdown Panel) and Trillo (Primary Bleed and Feed).

  4. Systems lifecycle cost-effectiveness the commercial, design and human factors of systems engineering

    CERN Document Server

    Pica, Massimo

    2014-01-01

    The pressure to minimize expenditure and provide value for money from reduced resources means that complex projects have to encompass a wide range of often conflicting issues and interests. Systems Lifecycle Cost-Effectiveness shows how to manage the difficulties that can arise. Massimo Pica presents a variety of models for calculating cost, benefits and risk in projects, and explains how the human factors associated with a system's design and consequent value are as important as the technical costs associated with its construction or creation. This comprehensive text can be used by students,

  5. Human factors engineering guidance for the review of advanced alarm systems

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.M.; Brown, W.S.; Higgins, J.C.; Stubler, W.F. [Brookhaven National Lab., Upton, NY (United States)

    1994-09-01

    This report provides guidance to support the review of the human factors aspects of advanced alarm system designs in nuclear power plants. The report is organized into three major sections. The first section describes the methodology and criteria that were used to develop the design review guidelines. Also included is a description of the scope, organization, and format of the guidelines. The second section provides a systematic review procedure in which important characteristics of the alarm system are identified, described, and evaluated. The third section provides the detailed review guidelines. The review guidelines are organized according to important characteristics of the alarm system including: alarm definition; alarm processing and reduction; alarm prioritization and availability; display; control; automated; dynamic, and modifiable characteristics; reliability, test, maintenance, and failure indication; alarm response procedures; and control-display integration and layout.

  6. Human factors engineering suitability verification of APR1400 soft control and safety console

    Energy Technology Data Exchange (ETDEWEB)

    Kang, S. G.; Kim, Y. K.; Shin, Y. C.; Jeo, S. J. [Nuclear Environment Technology Institute, Taejon (Korea, Republic of)

    2003-10-01

    At first, standard design of APR1400 is designed to support the operation of the EOP using soft control of safety and non-safety like the control room of N4 and AP600. However, KINS required that the design of the soft control for the operation of the EOP is safety grade. According to the comment of the KINS, the concept of the soft control is changed into the concept of the separation of the safety and non-safety for the design of the soft control. KINS required that the result of the HFE suitability verification for changed design is submitted to obtain the approval of the design certification. It was assessed that channelized soft controller is advantageous at the side of operator's mistake prevention and convenience. But non-channelized soft control was assessed that it was the most advantageous considering human factor. Safety console operation strategy is assessed that it is properly without problem during experiment period.

  7. Human-factors engineering for smart transport: Decision support for car drivers and train traffic controllers

    NARCIS (Netherlands)

    Lenior, D.; Janssen, W.H.; Neerincx, M.A.; Schreibers, K.

    2006-01-01

    The theme Smart Transport can be described as adequate human-system symbiosis to realize effective, efficient and human-friendly transport of goods and information. This paper addresses how to attune automation to human (cognitive) capacities (e.g. to take care of information uncertainty, operator t

  8. Fibronectin-Alginate microcapsules improve cell viability and protein secretion of encapsulated Factor IX-engineered human mesenchymal stromal cells.

    Science.gov (United States)

    Sayyar, Bahareh; Dodd, Megan; Marquez-Curtis, Leah; Janowska-Wieczorek, Anna; Hortelano, Gonzalo

    2015-01-01

    Continuous delivery of proteins by engineered cells encapsu-lated in biocompatible polymeric microcapsules is of considerable therapeutic potential. However, this technology has not lived up to expectations due to inadequate cell--matrix interactions and subsequent cell death. In this study we hypoth-esize that the presence of fibronectin in an alginate matrix may enhance the viability and functionality of encapsulated human cord blood-derived mesenchymal stromal cells (MSCs) expressing the human Factor IX (FIX) gene. MSCs were encapsulated in alginate-PLL microcapsules containing 10, 100, or 500 μg/ml fibronectin to ameliorate cell survival. MSCs in microcapsules with 100 and 500 μg/ml fibronectin demonstrated improved cell viability and proliferation and higher FIX secretion compared to MSCs in non-supplemented microcapsules. In contrast, 10 μg/ml fibronectin did not significantly affect the viability and protein secretion from the encapsulated cells. Differentiation studies demonstrated osteogenic (but not chondrogenic or adipogenic) differentiation capability and efficient FIX secretion of the enclosed MSCs in the fibronectin-alginate suspension culture. Thus, the use of recombinant MSCs encapsulated in fibronectin-alginate microcapsules in basal or osteogenic cultures may be of practical use in the treatment of hemophilia B.

  9. Medical devices and human engineering

    CERN Document Server

    Bronzino, Joseph D

    2014-01-01

    Known as the bible of biomedical engineering, The Biomedical Engineering Handbook, Fourth Edition, sets the standard against which all other references of this nature are measured. As such, it has served as a major resource for both skilled professionals and novices to biomedical engineering.Medical Devices and Human Engineering, the second volume of the handbook, presents material from respected scientists with diverse backgrounds in biomedical sensors, medical instrumentation and devices, human performance engineering, rehabilitation engineering, and clinical engineering.More than three doze

  10. Building a Formal Model of a Human-Interactive System: Insights into the Integration of Formal Methods and Human Factors Engineering

    Science.gov (United States)

    Bolton, Matthew L.; Bass, Ellen J.

    2009-01-01

    Both the human factors engineering (HFE) and formal methods communities are concerned with finding and eliminating problems with safety-critical systems. This work discusses a modeling effort that leveraged methods from both fields to use model checking with HFE practices to perform formal verification of a human-interactive system. Despite the use of a seemingly simple target system, a patient controlled analgesia pump, the initial model proved to be difficult for the model checker to verify in a reasonable amount of time. This resulted in a number of model revisions that affected the HFE architectural, representativeness, and understandability goals of the effort. If formal methods are to meet the needs of the HFE community, additional modeling tools and technological developments are necessary.

  11. Human Factors for Nursing: From In-Situ Testing to Mobile Usability Engineering.

    Science.gov (United States)

    Kushniruk, Andre W; Borycki, Elizabeth M; Solvoll, Terje; Hullin, Carola

    2016-01-01

    The tutorial goal is to familiarize participants with human aspects of health informatics and human-centered approaches to the design, evaluation and deployment of both usable and safe healthcare information systems. The focus will be on demonstrating and teaching practical and low-cost methods for evaluating mobile applications in nursing. Basic background to testing methods will be provided, followed by live demonstration of the methods. Then the audience will break into small groups to explore the application of the methods to applications of interest (there will be a number of possible applications that will be available for applications in areas such as electronic health records and decision support, however, if the groups have applications of specific interest to them that will be possible). The challenges of conducting usability testing, and in particular mobile usability testing will be discussed along with practical solutions. The target audience includes practicing nurses and nurse researchers, nursing informatics specialists, nursing students, nursing managers and health informatics professionals interested in improving the usability and safety of healthcare applications.

  12. Human Factors Evaluation Mentor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To obtain valid and reliable data, Human Factors Engineering (HFE) evaluations are currently conducted by people with specialized training and experience in HF. HFE...

  13. Scientific, Engineering, and Financial Factors of the 1989 Human-Triggered Newcastle Earthquake in Australia

    Science.gov (United States)

    Klose, C. D.

    2006-12-01

    This presentation emphasizes the dualism of natural resources exploitation and economic growth versus geomechanical pollution and risks of human-triggered earthquakes. Large-scale geoengineering activities, e.g., mining, reservoir impoundment, oil/gas production, water exploitation or fluid injection, alter pre-existing lithostatic stress states in the earth's crust and are anticipated to trigger earthquakes. Such processes of in- situ stress alteration are termed geomechanical pollution. Moreover, since the 19th century more than 200 earthquakes have been documented worldwide with a seismic moment magnitude of 4.5financial losses of triggered earthquakes. An hazard assessment, based on a geomechanical crust model, shows that only four deep coal mines were responsible for triggering this severe earthquake. A small-scale economic risk assessment identifies that the financial loss due to earthquake damage has reduced mining profits that have been re-invested in the Newcastle region for over two centuries beginning in 1801. Furthermore, large-scale economic risk assessment reveals that the financial loss is equivalent to 26% of the Australian Gross Domestic Product (GDP) growth in 1988/89. These costs account for 13% of the total costs of all natural disasters (e.g., flooding, drought, wild fires) and 94% of the costs of all earthquakes recorded in Australia between 1967 and 1999. In conclusion, the increasing number and size of geoengineering activities, such as coal mining near Newcastle or planned carbon dioxide Geosequestration initiatives, represent a growing hazard potential, which can negatively affect socio-economic growth and sustainable development. Finally, hazard and risk degrees, based on geomechanical-mathematical models, can be forecasted in space and over time for urban planning in order to prevent economic losses of human-triggered earthquakes in the future.

  14. The First Development of Human Factors Engineering Requirements for Application to Ground Task Design for a NASA Flight Program

    Science.gov (United States)

    Dischinger, H. Charles, Jr.; Stambolian, Damon B.; Miller, Darcy H.

    2008-01-01

    The National Aeronautics and Space Administration has long applied standards-derived human engineering requirements to the development of hardware and software for use by astronauts while in flight. The most important source of these requirements has been NASA-STD-3000. While there have been several ground systems human engineering requirements documents, none has been applicable to the flight system as handled at NASA's launch facility at Kennedy Space Center. At the time of the development of previous human launch systems, there were other considerations that were deemed more important than developing worksites for ground crews; e.g., hardware development schedule and vehicle performance. However, experience with these systems has shown that failure to design for ground tasks has resulted in launch schedule delays, ground operations that are more costly than they might be, and threats to flight safety. As the Agency begins the development of new systems to return humans to the moon, the new Constellation Program is addressing this issue with a new set of human engineering requirements. Among these requirements is a subset that will apply to the design of the flight components and that is intended to assure ground crew success in vehicle assembly and maintenance tasks. These requirements address worksite design for usability and for ground crew safety.

  15. Human Factors Review Plan

    Energy Technology Data Exchange (ETDEWEB)

    Paramore, B.; Peterson, L.R. (eds.)

    1985-12-01

    ''Human Factors'' is concerned with the incorporation of human user considerations into a system in order to maximize human reliability and reduce errors. This Review Plan is intended to assist in the assessment of human factors conditions in existing DOE facilities. In addition to specifying assessment methodologies, the plan describes techniques for improving conditions which are found to not adequately support reliable human performance. The following topics are addressed: (1) selection of areas for review describes techniques for needs assessment to assist in selecting and prioritizing areas for review; (2) human factors engineering review is concerned with optimizing the interfaces between people and equipment and people and their work environment; (3) procedures review evaluates completeness and accuracy of procedures, as well as their usability and management; (4) organizational interface review is concerned with communication and coordination between all levels of an organization; and (5) training review evaluates training program criteria such as those involving: trainee selection, qualification of training staff, content and conduct of training, requalification training, and program management.

  16. Department of Defense Human Factors Engineering Technical Advisory Group Minutes of the Meeting, (15th), Held at San Diego, California, on 5-7 November 1985

    Science.gov (United States)

    1985-11-01

    Anthropometry of US Military Personnel 30 Jun 81 Human Factors Engineering Design for Army Materiel 28 Jun 85 HE Guidelines for Mgt Info Sys I SAE...tor_and system effectiveness. Paper presented at NATd~De" fence "Research Group Panel Vl£l~Uorkshop, Shrivenhara, England. Geer, C.W...DUE OT«E [ SPE CIFICATION CHECKS jwj] ANTHROPOMETRY ENVIRONMENTAL EVALUATIONS FACILITY, WORKSTATION EVAl DISPIAYTASK ANALYSIS ERROR RATE

  17. Genetic engineering and coagulation factors.

    Science.gov (United States)

    Fass, D N; Toole, J J

    1985-06-01

    It is unfortunate that we cannot report, in the area of coagulation, advances that have been seen in related fields such as thrombolytic therapy. The reported progress (Gold et al, 1984; Van de Werf et al, 1984) with human recombinant tissue plasminogen activator (Pennica et al, 1983) augers well for the application of recombinant technology to the problems faced by patients with coagulation defects. While plasminogen activator is being assessed in an acute therapeutic setting, its use signals a beginning of the application of the technology to abnormalities of the haemostatic mechanism. Chronic administration of coagulation factors for prophylaxis and replacement therapy would appear to be just one more step down the pathway illuminated by the biochemists, microbiologists and cell biologists who have preceded the clinicians in this promising area. There is no record of the use of genetically engineered materials in the treatment of coagulation defects, primarily because the body of knowledge and refined techniques have only recently been acquired. For this reason we have had to project developments in other areas onto the problems that exist for the haemostatically compromised patient. In describing the potential usefulness of these technologies, it is difficult to ascertain where the logical projection, from a fully investigated model system, diverges from flights of imaginative fancy. Cloning projects considered overly ambitious and grandiose at the beginning of this decade are already accomplished feats. The feasibility of gene therapy in the mammalian system has been demonstrated, and trade publications now discuss governmental approval for investigative use of this procedure in 1985. Panels of physicians, scientists and even politicians now seriously contemplate and promulgate views and regulations pertaining to the efficacy and ethics of the use of genetic engineering in the treatment of human disease. The haemophilias will certainly be among the first

  18. ISS Payload Human Factors

    Science.gov (United States)

    Ellenberger, Richard; Duvall, Laura; Dory, Jonathan

    2016-01-01

    The ISS Payload Human Factors Implementation Team (HFIT) is the Payload Developer's resource for Human Factors. HFIT is the interface between Payload Developers and ISS Payload Human Factors requirements in SSP 57000. ? HFIT provides recommendations on how to meet the Human Factors requirements and guidelines early in the design process. HFIT coordinates with the Payload Developer and Astronaut Office to find low cost solutions to Human Factors challenges for hardware operability issues.

  19. Using Life-Cycle Human Factors Engineering to Avoid $2.4 Million in Costs: Lessons Learned from NASA's Requirements Verification Process for Space Payloads

    Science.gov (United States)

    Carr, Daniel; Ellenberger, Rich

    2008-01-01

    The Human Factors Implementation Team (HFIT) process has been used to verify human factors requirements for NASA International Space Station (ISS) payloads since 2003, resulting in $2.4 million in avoided costs. This cost benefit has been realized by greatly reducing the need to process time-consuming formal waivers (exceptions) for individual requirements violations. The HFIT team, which includes astronauts and their technical staff, acts as the single source for human factors requirements integration of payloads. HFIT has the authority to provide inputs during early design phases, thus eliminating many potential requirements violations in a cost-effective manner. In those instances where it is not economically or technically feasible to meet the precise metric of a given requirement, HFIT can work with the payload engineers to develop common sense solutions and formally document that the resulting payload design does not materially affect the astronaut s ability to operate and interact with the payload. The HFIT process is fully ISO 9000 compliant and works concurrently with NASA s formal systems engineering work flow. Due to its success with payloads, the HFIT process is being adapted and extended to ISS systems hardware. Key aspects of this process are also being considered for NASA's Space Shuttle replacement, the Crew Exploration Vehicle.

  20. Human Factors Considerations in System Design

    Science.gov (United States)

    Mitchell, C. M. (Editor); Vanbalen, P. M. (Editor); Moe, K. L. (Editor)

    1983-01-01

    Human factors considerations in systems design was examined. Human factors in automated command and control, in the efficiency of the human computer interface and system effectiveness are outlined. The following topics are discussed: human factors aspects of control room design; design of interactive systems; human computer dialogue, interaction tasks and techniques; guidelines on ergonomic aspects of control rooms and highly automated environments; system engineering for control by humans; conceptual models of information processing; information display and interaction in real time environments.

  1. Software Engineering for Human Spaceflight

    Science.gov (United States)

    Fredrickson, Steven E.

    2014-01-01

    The Spacecraft Software Engineering Branch of NASA Johnson Space Center (JSC) provides world-class products, leadership, and technical expertise in software engineering, processes, technology, and systems management for human spaceflight. The branch contributes to major NASA programs (e.g. ISS, MPCV/Orion) with in-house software development and prime contractor oversight, and maintains the JSC Engineering Directorate CMMI rating for flight software development. Software engineering teams work with hardware developers, mission planners, and system operators to integrate flight vehicles, habitats, robotics, and other spacecraft elements. They seek to infuse automation and autonomy into missions, and apply new technologies to flight processor and computational architectures. This presentation will provide an overview of key software-related projects, software methodologies and tools, and technology pursuits of interest to the JSC Spacecraft Software Engineering Branch.

  2. User Experience of Commercial Website Based on Human Factor Engineering%基于人因角度的商务网站用户体验研究

    Institute of Scientific and Technical Information of China (English)

    左文明; 黄静云; 黄秋萍; 樊偿

    2012-01-01

    结合人因工程与用户体验理论,研究基于人因角度的商务网站用户体验。通过问卷调查,在商务网站品牌、页面设计、流程设计和功能设计等方面总结和分析出有利于提高用户满意度的要素。基于量化的用户体验要素,对新蛋网和凡客诚品网这两个典型的电子商务网站进行全面的对比分析,验证提出的基于人因工程的商务网站用户体验的满意度评价标准,并以南周商城为实际案例,从页面设计、流程设计和功能设计等方面分析提出用户体验优化方案。%With combination of human factors and user experience theory, user experience of commercial website based on human factor engineering is studied. Through questionnaire survey, 300 copies of valid user experience data are obtained. Factors beneficial to improving customer satisfaction for commercial websites from brand, page design, process design and functional design are summed up and analyzed. Based on these quantified factors, comprehensive comparative analysis of 2 popular commerce sites including Newegg and Vancl are conducted. And user satisfaction evaluation criteria at the angle of user experience of commercial website based on human factor engineering is verified. With NanZhouShangCbeng as an actual case, user experience optimization is analyzed in detail from page design, process design and function design.

  3. Genome engineering in human cells.

    Science.gov (United States)

    Song, Minjung; Kim, Young-Hoon; Kim, Jin-Soo; Kim, Hyongbum

    2014-01-01

    Genome editing in human cells is of great value in research, medicine, and biotechnology. Programmable nucleases including zinc-finger nucleases, transcription activator-like effector nucleases, and RNA-guided engineered nucleases recognize a specific target sequence and make a double-strand break at that site, which can result in gene disruption, gene insertion, gene correction, or chromosomal rearrangements. The target sequence complexities of these programmable nucleases are higher than 3.2 mega base pairs, the size of the haploid human genome. Here, we briefly introduce the structure of the human genome and the characteristics of each programmable nuclease, and review their applications in human cells including pluripotent stem cells. In addition, we discuss various delivery methods for nucleases, programmable nickases, and enrichment of gene-edited human cells, all of which facilitate efficient and precise genome editing in human cells.

  4. Tissue Engineered Human Skin Equivalents

    Directory of Open Access Journals (Sweden)

    Zheng Zhang

    2012-01-01

    Full Text Available Human skin not only serves as an important barrier against the penetration of exogenous substances into the body, but also provides a potential avenue for the transport of functional active drugs/reagents/ingredients into the skin (topical delivery and/or the body (transdermal delivery. In the past three decades, research and development in human skin equivalents have advanced in parallel with those in tissue engineering and regenerative medicine. The human skin equivalents are used commercially as clinical skin substitutes and as models for permeation and toxicity screening. Several academic laboratories have developed their own human skin equivalent models and applied these models for studying skin permeation, corrosivity and irritation, compound toxicity, biochemistry, metabolism and cellular pharmacology. Various aspects of the state of the art of human skin equivalents are reviewed and discussed.

  5. Controlled Dual Growth Factor Delivery From Microparticles Incorporated Within Human Bone Marrow-Derived Mesenchymal Stem Cell Aggregates for Enhanced Bone Tissue Engineering via Endochondral Ossification.

    Science.gov (United States)

    Dang, Phuong N; Dwivedi, Neha; Phillips, Lauren M; Yu, Xiaohua; Herberg, Samuel; Bowerman, Caitlin; Solorio, Loran D; Murphy, William L; Alsberg, Eben

    2016-02-01

    Bone tissue engineering via endochondral ossification has been explored by chondrogenically priming cells using soluble mediators for at least 3 weeks to produce a hypertrophic cartilage template. Although recapitulation of endochondral ossification has been achieved, long-term in vitro culture is required for priming cells through repeated supplementation of inductive factors in the media. To address this challenge, a microparticle-based growth factor delivery system was engineered to drive endochondral ossification within human bone marrow-derived mesenchymal stem cell (hMSC) aggregates. Sequential exogenous presentation of soluble transforming growth factor-β1 (TGF-β1) and bone morphogenetic protein-2 (BMP-2) at various defined time courses resulted in varying degrees of chondrogenesis and osteogenesis as demonstrated by glycosaminoglycan and calcium content. The time course that best induced endochondral ossification was used to guide the development of the microparticle-based controlled delivery system for TGF-β1 and BMP-2. Gelatin microparticles capable of relatively rapid release of TGF-β1 and mineral-coated hydroxyapatite microparticles permitting more sustained release of BMP-2 were then incorporated within hMSC aggregates and cultured for 5 weeks following the predetermined time course for sequential presentation of bioactive signals. Compared with cell-only aggregates treated with exogenous growth factors, aggregates with incorporated TGF-β1- and BMP-2-loaded microparticles exhibited enhanced chondrogenesis and alkaline phosphatase activity at week 2 and a greater degree of mineralization by week 5. Staining for types I and II collagen, osteopontin, and osteocalcin revealed the presence of cartilage and bone. This microparticle-incorporated system has potential as a readily implantable therapy for healing bone defects without the need for long-term in vitro chondrogenic priming. Significance: This study demonstrates the regulation of chondrogenesis

  6. Engineering a Cysteine-Free Form of Human Fibroblast Growth Factor-1 for “Second Generation” Therapeutic Application

    Energy Technology Data Exchange (ETDEWEB)

    Xia, Xue; Kumru, Ozan S.; Blaber, Sachiko I.; Middaugh, C. Russell; Li, Ling; Ornitz, David M.; Sutherland, Mason A.; Tenorio, Connie A.; Blaber, Michael (FSU); (WU-MED); (Kansas)

    2016-07-06

    Human fibroblast growth factor-1 (FGF-1) has broad therapeutic potential in regenerative medicine but has undesirable biophysical properties of low thermostability and 3 buried cysteine (Cys) residues (at positions 16, 83, and 117) that interact to promote irreversible protein unfolding under oxidizing conditions. Mutational substitution of such Cys residues eliminates reactive buried thiols but cannot be accomplished simultaneously at all 3 positions without also introducing further substantial instability. The mutational introduction of a novel Cys residue (Ala66Cys) that forms a stabilizing disulfide bond (i.e., cystine) with one of the extant Cys residues (Cys83) effectively eliminates one Cys while increasing overall stability. This increase in stability offsets the associated instability of remaining Cys substitution mutations and permits production of a Cys-free form of FGF-1 (Cys16Ser/Ala66Cys/Cys117Ala) with only minor overall instability. The addition of a further stabilizing mutation (Pro134Ala) creates a Cys-free FGF-1 mutant with essentially wild-type biophysical properties. The elimination of buried free thiols in FGF-1 can substantially increase the protein half-life in cell culture. Here, we show that the effective cell survival/mitogenic functional activity of a fully Cys-free form is also substantially increased and is equivalent to wild-type FGF-1 formulated in the presence of heparin sulfate as a stabilizing agent. The results identify this Cys-free FGF-1 mutant as an advantageous “second generation” form of FGF-1 for therapeutic application.

  7. Human Factors Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose: The purpose of the Human Factors Laboratory is to further the understanding of highway user needs so that those needs can be incorporated in roadway design,...

  8. Factors of airplane engine performance

    Science.gov (United States)

    Gage, Victor R

    1921-01-01

    This report is based upon an analysis of a large number of airplane-engine tests. It contains the results of a search for fundamental relations between many variables of engine operation. The data used came from over 100 groups of tests made upon several engines, primarily for military information. The types of engines were the Liberty 12 and three models of the Hispano-Suiza. The tests were made in the altitude chamber, where conditions simulated altitudes up to about 30,000 feet, with engine speeds ranging from 1,200 to 2,200 r.p.m. The compression ratios of the different engines ranged from under 5 to over 8 to 1. The data taken on the tests were exceptionally complete, including variations of pressure and temperature, besides the brake and friction torques, rates of fuel and air consumption, the jacket and exhaust heat losses.

  9. Introduction to human factors

    Energy Technology Data Exchange (ETDEWEB)

    Winters, J.M.

    1988-03-01

    Some background is given on the field of human factors. The nature of problems with current human/computer interfaces is discussed, some costs are identified, ideal attributes of graceful system interfaces are outlined, and some reasons are indicated why it's not easy to fix the problems. (LEW)

  10. Study on Task Analysis of Human Factors Engineering in Nuclear Power Plant%核电厂人因工程设计的任务分析研究

    Institute of Scientific and Technical Information of China (English)

    褚雪芹; 陈洁; 崔泽朋; 齐旭

    2016-01-01

    任务分析作为人因工程设计的要素之一,确定了操纵员为完成系统功能所必须执行的操作以及与这些操作相关的控制和状态反馈需求,进而实现对人机界面的优化。本文基于人因工程审查大纲NUREG-0711,结合海南昌江核电站设备冷却水房间通风系统,研究了任务分析的实施方法。明确的任务分析能够将人员因素更有效地整合在系统设计和运行中,使人机界面设计更加科学及合理。%Task analysis as an important part of Human Factors .Engineering determines the operations performed to complete the system functions for the operator, and the requirements of controls and indications related to the operation, and finally to optimize the Human-System Interface design. A methodology for the implementation of Task Analysis is studied here based on NUREG-0711. It is illustrated combined with DVI system of Hainan nuclear power plant project. Explicit task analysis leads to more efficient integration of the human element into system design and operation. With the systematic analysis of task analysis, the Human-System interface design would be more scientific and rational.

  11. Motivational factors, gender and engineering education

    DEFF Research Database (Denmark)

    Kolmos, Anette; Mejlgaard, Niels; Haase, Sanne Schioldann

    2013-01-01

    Based on survey data covering the full population of students enrolled in Danish engineering education in autumn 2010, we explore the motivational factors behind educational choice, with a particular aim of comparing male and female students1 reasons for choosing a career in engineering. We find...... that women are significantly more influenced by mentors than men, while men tend to be more motivated by intrinsic and financial factors, and by the social importance of the engineering profession. Parental influence is low across all programmes and by differentiating between specific clusters of engineering...

  12. A human factors engineering approach to biomedical decision making: A new role for automatic target recognizer technologies

    Energy Technology Data Exchange (ETDEWEB)

    Sobel, A.L.; Stalker, K.T.; Yee, A.

    1995-01-01

    This report identifies the key features noted as requirements in the diagnostic decision-making process of Single Photon Emission Computed Tomography (SPECT) cardiac imaging. The report discusses the critical issues that create the basic system framework for design of an automatic target recognizer (ATR) algorithm prototype to support diagnosis of coronary artery disease. Candidate feature discovery algorithms that may form the basis of future work include Adaptive Resonance Theory and Bayesian Decision Network. A framework for the practitioner-Human-System-Interface would include baseline patient history and demographic data; reference cardiac imagery history; and current overlay imagery to provide complementary information (i.e., coronary angiography, echocardiography, and SPECT images). The goal is to design a prototype that would represent a fused present and historical {open_quotes}whole{close_quotes} functional, structural, and physiologic cardiac patient model. This framework decision-assisting platform would be available to practitioner and student alike, with no {open_quotes}real-world{close_quotes} consequences.

  13. Human Factors and Robotics: Current Status and Future Prospects.

    Science.gov (United States)

    Parsons, H. McIlvaine; Kearsley, Greg P.

    The principal human factors engineering issue in robotics is the division of labor between automation (robots) and human beings. This issue reflects a prime human factors engineering consideration in systems design--what equipment should do and what operators and maintainers should do. Understanding of capabilities and limitations of robots and…

  14. Motivational factors, gender and engineering education

    DEFF Research Database (Denmark)

    Kolmos, Anette; Mejlgaard, Niels; Haase, Sanne Schioldann

    2013-01-01

    Based on survey data covering the full population of students enrolled in Danish engineering education in autumn 2010, we explore the motivational factors behind educational choice, with a particular aim of comparing male and female students1 reasons for choosing a career in engineering. We find...... programmes, we further show that these overall gender differences are subtle and that motivational factors are unequally important across the different educational programmes. The findings from this study clearly indicate that intrinsic and social motivations are the most important motivational factors......; however, gender and programme differentiation needs to be taken into account, and points towards diverse future strategies for attracting students to engineering education....

  15. Human Factors in Space Exploration

    Science.gov (United States)

    Jones, Patricia M.; Fiedler, Edna

    2010-01-01

    The exploration of space is one of the most fascinating domains to study from a human factors perspective. Like other complex work domains such as aviation (Pritchett and Kim, 2008), air traffic management (Durso and Manning, 2008), health care (Morrow, North, and Wickens, 2006), homeland security (Cooke and Winner, 2008), and vehicle control (Lee, 2006), space exploration is a large-scale sociotechnical work domain characterized by complexity, dynamism, uncertainty, and risk in real-time operational contexts (Perrow, 1999; Woods et ai, 1994). Nearly the entire gamut of human factors issues - for example, human-automation interaction (Sheridan and Parasuraman, 2006), telerobotics, display and control design (Smith, Bennett, and Stone, 2006), usability, anthropometry (Chaffin, 2008), biomechanics (Marras and Radwin, 2006), safety engineering, emergency operations, maintenance human factors, situation awareness (Tenney and Pew, 2006), crew resource management (Salas et aI., 2006), methods for cognitive work analysis (Bisantz and Roth, 2008) and the like -- are applicable to astronauts, mission control, operational medicine, Space Shuttle manufacturing and assembly operations, and space suit designers as they are in other work domains (e.g., Bloomberg, 2003; Bos et al, 2006; Brooks and Ince, 1992; Casler and Cook, 1999; Jones, 1994; McCurdy et ai, 2006; Neerincx et aI., 2006; Olofinboba and Dorneich, 2005; Patterson, Watts-Perotti and Woods, 1999; Patterson and Woods, 2001; Seagull et ai, 2007; Sierhuis, Clancey and Sims, 2002). The human exploration of space also has unique challenges of particular interest to human factors research and practice. This chapter provides an overview of those issues and reports on sorne of the latest research results as well as the latest challenges still facing the field.

  16. Helicopter human factors

    Science.gov (United States)

    Hart, Sandra G.

    1988-01-01

    The state-of-the-art helicopter and its pilot are examined using the tools of human-factors analysis. The significant role of human error in helicopter accidents is discussed; the history of human-factors research on helicopters is briefly traced; the typical flight tasks are described; and the noise, vibration, and temperature conditions typical of modern military helicopters are characterized. Also considered are helicopter controls, cockpit instruments and displays, and the impact of cockpit design on pilot workload. Particular attention is given to possible advanced-technology improvements, such as control stabilization and augmentation, FBW and fly-by-light systems, multifunction displays, night-vision goggles, pilot night-vision systems, night-vision displays with superimposed symbols, target acquisition and designation systems, and aural displays. Diagrams, drawings, and photographs are provided.

  17. Motivational Factors, Gender and Engineering Education

    Science.gov (United States)

    Kolmos, Anette; Mejlgaard, Niels; Haase, Sanne; Holgaard, Jette Egelund

    2013-01-01

    Based on survey data covering the full population of students enrolled in Danish engineering education in autumn 2010, we explore the motivational factors behind educational choice, with a particular aim of comparing male and female students reasons for choosing a career in engineering. We find that women are significantly more influenced by…

  18. Human Flesh Search Engine and Online Privacy.

    Science.gov (United States)

    Zhang, Yang; Gao, Hong

    2016-04-01

    Human flesh search engine can be a double-edged sword, bringing convenience on the one hand and leading to infringement of personal privacy on the other hand. This paper discusses the ethical problems brought about by the human flesh search engine, as well as possible solutions.

  19. Human Factors Model

    Science.gov (United States)

    1993-01-01

    Jack is an advanced human factors software package that provides a three dimensional model for predicting how a human will interact with a given system or environment. It can be used for a broad range of computer-aided design applications. Jack was developed by the computer Graphics Research Laboratory of the University of Pennsylvania with assistance from NASA's Johnson Space Center, Ames Research Center and the Army. It is the University's first commercial product. Jack is still used for academic purposes at the University of Pennsylvania. Commercial rights were given to Transom Technologies, Inc.

  20. Human factors in network security

    OpenAIRE

    Jones, Francis B.

    1991-01-01

    Human factors, such as ethics and education, are important factors in network information security. This thesis determines which human factors have significant influence on network security. Those factors are examined in relation to current security devices and procedures. Methods are introduced to evaluate security effectiveness by incorporating the appropriate human factors into network security controls

  1. Application of human factors engineering (HFE) to the design of a naloxone auto-injector for the treatment of opioid emergencies.

    Science.gov (United States)

    Raffa, Robert B; Taylor, Robert; Pergolizzi, Joseph V; Nalamachu, Srinivas; Edwards, Eric S; Edwards, Evan T

    2017-02-01

    The increased use of opioids for chronic treatment of pain and the resulting epidemic of opioid overdoses have created a major public health challenge. Parenteral naloxone has been used since the 1970's to treat opioid overdose. Recently, a novel naloxone auto-injector device (EVZIO, kaleo, Inc., Richmond, VA) was approved by the Food and Drug Administration. In this article, we review the Human Factors Engineering (HFE) process used in the development and testing of this novel naloxone auto-injector currently used in nonmedical settings for the emergency treatment of known or suspected opioid overdose. HFE methods were employed throughout the product development process for the naloxone auto-injector including formative and summative studies in order to optimize the auto-injector's user interface, mitigate use-related hazards and increase reliability during an opioid emergency use scenario. HFE was also used to optimize the product's design and user interface in order to reduce or prevent user confusion and misuse. The naloxone auto-injector went through a rigorous HFE process that included perceptual, cognitive, and physical action analysis; formative usability evaluations; use error analysis and summative design validation studies. Applying HFE resulted in the development of a product that is safe, fast, easy and predictably reliable to deliver a potentially life-saving dose of naloxone during an opioid overdose emergency. The naloxone auto-injector may be considered as a universal precaution option for at-risk patients prescribed opioids or those who are at increased risk for an opioid overdose emergency.

  2. Human reliability guidance - How to increase the synergies between human reliability, human factors, and system design and engineering. Phase 2: The American Point of View - Insights of how the US nuclear industry works with human reliability analysis

    Energy Technology Data Exchange (ETDEWEB)

    Oxstrand, J. (Vattenfall Ringhals AB, Stockholm (Sweden))

    2010-12-15

    The main goal of this Nordic Nuclear Safety Research Council (NKS) project is to produce guidance for how to use human reliability analysis (HRA) to strengthen overall safety. The project consists of two substudies: The Nordic Point of View - A User Needs Analysis, and The American Point of View - Insights of How the US Nuclear Industry Works with HRA. The purpose of the Nordic Point of View study was a user needs analysis that aimed to survey current HRA practices in the Nordic nuclear industry, with the main focus being to connect HRA to system design. In this study, 26 Nordic (Swedish and Finnish) nuclear power plant specialists with research, practitioner, and regulatory expertise in HRA, PRA, HSI, and human performance were interviewed. This study was completed in 2009. This study concludes that HRA is an important tool when dealing with human factors in control room design or modernizations. The Nordic Point of View study showed areas where the use of HRA in the Nordic nuclear industry could be improved. To gain more knowledge about how these improvements could be made, and what improvements to focus on, the second study was conducted. The second study is focused on the American nuclear industry, which has many more years of experience with risk assessment and human reliability than the Nordic nuclear industry. Interviews were conducted to collect information to help the author understand the similarities and differences between the American and the Nordic nuclear industries, and to find data regarding the findings from the first study. The main focus of this report is to identify potential HRA improvements based on the data collected in the American Point of View survey. (Author)

  3. Helicopter Human Factors

    Science.gov (United States)

    Hart, Sandra G.; Sridhar, Banavar (Technical Monitor)

    1995-01-01

    Even under optimal conditions, helicopter flight is a most demanding form of human-machine interaction, imposing continuous manual, visual, communications, and mental demands on pilots. It is made even more challenging by small margins for error created by the close proximity of terrain in NOE flight and missions flown at night and in low visibility. Although technology advances have satisfied some current and proposed requirements, hardware solutions alone are not sufficient to ensure acceptable system performance and pilot workload. However, human factors data needed to improve the design and use of helicopters lag behind advances in sensor, display, and control technology. Thus, it is difficult for designers to consider human capabilities and limitations when making design decisions. This results in costly accidents, design mistakes, unrealistic mission requirements, excessive training costs, and challenge human adaptability. NASA, in collaboration with DOD, industry, and academia, has initiated a program of research to develop scientific data bases and design principles to improve the pilot/vehicle interface, optimize training time and cost, and maintain pilot workload and system performance at an acceptable level. Work performed at Ames, and by other research laboratories, will be reviewed to summarize the most critical helicopter human factors problems and the results of research that has been performed to: (1) Quantify/model pilots use of visual cues for vehicle control; (2) Improve pilots' performance with helmet displays of thermal imagery and night vision goggles for situation awareness and vehicle control; (3) Model the processes by which pilots encode maps and compare them to the visual scene to develop perceptually and cognitively compatible electronic map formats; (4) Evaluate the use of spatially localized auditory displays for geographical orientation, target localization, radio frequency separation; (5) Develop and flight test control

  4. Helicopter Human Factors

    Science.gov (United States)

    Hart, Sandra G.; Sridhar, Banavar (Technical Monitor)

    1995-01-01

    Even under optimal conditions, helicopter flight is a most demanding form of human-machine interaction, imposing continuous manual, visual, communications, and mental demands on pilots. It is made even more challenging by small margins for error created by the close proximity of terrain in NOE flight and missions flown at night and in low visibility. Although technology advances have satisfied some current and proposed requirements, hardware solutions alone are not sufficient to ensure acceptable system performance and pilot workload. However, human factors data needed to improve the design and use of helicopters lag behind advances in sensor, display, and control technology. Thus, it is difficult for designers to consider human capabilities and limitations when making design decisions. This results in costly accidents, design mistakes, unrealistic mission requirements, excessive training costs, and challenge human adaptability. NASA, in collaboration with DOD, industry, and academia, has initiated a program of research to develop scientific data bases and design principles to improve the pilot/vehicle interface, optimize training time and cost, and maintain pilot workload and system performance at an acceptable level. Work performed at Ames, and by other research laboratories, will be reviewed to summarize the most critical helicopter human factors problems and the results of research that has been performed to: (1) Quantify/model pilots use of visual cues for vehicle control; (2) Improve pilots' performance with helmet displays of thermal imagery and night vision goggles for situation awareness and vehicle control; (3) Model the processes by which pilots encode maps and compare them to the visual scene to develop perceptually and cognitively compatible electronic map formats; (4) Evaluate the use of spatially localized auditory displays for geographical orientation, target localization, radio frequency separation; (5) Develop and flight test control

  5. Bridging Resilience Engineering and Human Reliability Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ronald L. Boring

    2010-06-01

    There has been strong interest in the new and emerging field called resilience engineering. This field has been quick to align itself with many existing safety disciplines, but it has also distanced itself from the field of human reliability analysis. To date, the discussion has been somewhat one-sided, with much discussion about the new insights afforded by resilience engineering. This paper presents an attempt to address resilience engineering from the perspective of human reliability analysis (HRA). It is argued that HRA shares much in common with resilience engineering and that, in fact, it can help strengthen nascent ideas in resilience engineering. This paper seeks to clarify and ultimately refute the arguments that have served to divide HRA and resilience engineering.

  6. Development of human factors design review guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea)

    1997-10-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: 25. Human Factors Engineering Program Review Model and 26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation, which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents of NUREG-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994. (author). 12 refs., 5 figs., 2 tabs.

  7. 130 FEMINISM AND HUMAN GENETIC ENGINEERING: A ...

    African Journals Online (AJOL)

    Ike Odimegwu

    Abstract. Human genetic in the area of Bio-ethics is a new, rapidly advancing. Science. ... Human genetic engineering, a recent one in medical science and practice, is one ..... The Church on Cloning and Stem Cell Research. The teaching of ...

  8. Cell-matrix Interactions of Factor IX (FIX)-engineered human mesenchymal stromal cells encapsulated in RGD-alginate vs. fibrinogen-alginate microcapsules.

    Science.gov (United States)

    Sayyar, Bahareh; Dodd, Megan; Marquez-Curtis, Leah; Janowska-Wieczorek, Anna; Hortelano, Gonzalo

    2014-04-01

    The success of cell microencapsulation technology in tissue engineering and protein delivery applications depends on the viability and functionality of the encapsulated cells, which in turn are dependent upon cell/matrix interactions. In this work, we compared the viability of cord blood-derived mesenchymal stromal cells (CB MSCs), engineered to secrete factor IX (FIX) for hemophilia treatment, and encapsulated in arginine-glycine-aspartate (RGD)-alginate versus fibrinogen-alginate microcapsules. We evaluated the effect of the biomimetic matrix on cell attachment, proliferation, and secretion of FIX. Compared with nonsupplemented alginate matrix, RGD-alginate significantly enhanced the viability of the encapsulated MSCs. Further, cells in RGD-alginate displayed distinct attachment morphology, thus suggesting that RGD-alginate can potentially be used for the encapsulation of MSCs in tissue engineering applications that require enhanced cell attachment and viability. However, our data also showed that RGD-alginate microcapsules, in contrast to fibrinogen-alginate microcapsules, did not significantly improve cell proliferation of or FIX secretion by encapsulated MSCs. Our findings suggest that evidence of cell attachment alone may not accurately predict the functionality of cells in biomimetic microcapsules.

  9. Research Directory for Manpower, Personnel, Training, and Human Factors.

    Science.gov (United States)

    1991-01-01

    Design 89 * * * HUMAN FACTORS ENGINEERING (lIFE) * AIR FORCE Arnaiz J* Gentex Corp 717-282-3550 Support of the Evaluation of Night Vision Devices...Command 8 48 Armstrong R Mr Human Engineering Lab 10 76 Arnaiz J* Gentex Corp 10 90 Arnold D Office of the Chief of Naval Operations 6 41 Arnold L

  10. Human Factors in Training

    Science.gov (United States)

    Barshi, Immanuel; Byrne, Vicky; Arsintescu, Lucia; Connell, Erin

    2010-01-01

    Future space missions will be significantly longer than current shuttle missions and new systems will be more complex than current systems. Increasing communication delays between crews and Earth-based support means that astronauts need to be prepared to handle the unexpected on their own. As crews become more autonomous, their potential span of control and required expertise must grow to match their autonomy. It is not possible to train for every eventuality ahead of time on the ground, or to maintain trained skills across long intervals of disuse. To adequately prepare NASA personnel for these challenges, new training approaches, methodologies, and tools are required. This research project aims at developing these training capabilities. By researching established training principles, examining future needs, and by using current practices in space flight training as test beds, both in Flight Controller and Crew Medical domains, this research project is mitigating program risks and generating templates and requirements to meet future training needs. Training efforts in Fiscal Year 09 (FY09) strongly focused on crew medical training, but also began exploring how Space Flight Resource Management training for Mission Operations Directorate (MOD) Flight Controllers could be integrated with systems training for optimal Mission Control Center (MCC) operations. The Training Task addresses Program risks that lie at the intersection of the following three risks identified by the Project: 1) Risk associated with poor task design; 2) Risk of error due to inadequate information; and 3) Risk associated with reduced safety and efficiency due to poor human factors design.

  11. Human Factors in Marine Casualties

    Directory of Open Access Journals (Sweden)

    Jelenko Švetak

    2002-05-01

    Full Text Available Human factors play an important role in the origin of accidents,and it is commonly claimed that between seventy andninety-five percent of industrial and transport accidents involvehuman factors, see Figure 1.Some authorities, however, claim that ultimately, all accidentsinvolve human factors.

  12. Paracrine Engineering of Human Explant-Derived Cardiac Stem Cells to Over-Express Stromal-Cell Derived Factor 1α Enhances Myocardial Repair.

    Science.gov (United States)

    Tilokee, Everad L; Latham, Nicholas; Jackson, Robyn; Mayfield, Audrey E; Ye, Bin; Mount, Seth; Lam, Buu-Khanh; Suuronen, Erik J; Ruel, Marc; Stewart, Duncan J; Davis, Darryl R

    2016-07-01

    First generation cardiac stem cell products provide indirect cardiac repair but variably produce key cardioprotective cytokines, such as stromal-cell derived factor 1α, which opens the prospect of maximizing up-front paracrine-mediated repair. The mesenchymal subpopulation within explant derived human cardiac stem cells underwent lentiviral mediated gene transfer of stromal-cell derived factor 1α. Unlike previous unsuccessful attempts to increase efficacy by boosting the paracrine signature of cardiac stem cells, cytokine profiling revealed that stromal-cell derived factor 1α over-expression prevented lv-mediated "loss of cytokines" through autocrine stimulation of CXCR4+ cardiac stem cells. Stromal-cell derived factor 1α enhanced angiogenesis and stem cell recruitment while priming cardiac stem cells to readily adopt a cardiac identity. As compared to injection with unmodified cardiac stem cells, transplant of stromal-cell derived factor 1α enhanced cells into immunodeficient mice improved myocardial function and angiogenesis while reducing scarring. Increases in myocardial stromal-cell derived factor 1α content paralleled reductions in myocyte apoptosis but did not influence long-term engraftment or the fate of transplanted cells. Transplantation of stromal-cell derived factor 1α transduced cardiac stem cells increased the generation of new myocytes, recruitment of bone marrow cells, new myocyte/vessel formation and the salvage of reversibly damaged myocardium to enhance cardiac repair after experimental infarction. Stem Cells 2016;34:1826-1835.

  13. Human Factors Principles in Information Dashboard Design

    Energy Technology Data Exchange (ETDEWEB)

    Hugo, Jacques V.; St. Germain, Shawn

    2016-06-01

    When planning for control room upgrades, nuclear power plants have to deal with a multitude of engineering and operational impacts. This will inevitably include several human factors considerations, including physical ergonomics of workstations, viewing angles, lighting, seating, new communication requirements, and new concepts of operation. In helping nuclear power utilities to deal with these challenges, the Idaho National Laboratory (INL) has developed effective methods to manage the various phases of the upgrade life cycle. These methods focus on integrating human factors engineering processes with the plant’s systems engineering process, a large part of which is the development of end-state concepts for control room modernization. Such an end-state concept is a description of a set of required conditions that define the achievement of the plant’s objectives for the upgrade. Typically, the end-state concept describes the transition of a conventional control room, over time, to a facility that employs advanced digital automation technologies in a way that significantly improves system reliability, reduces human and control room-related hazards, reduces system and component obsolescence, and significantly improves operator performance. To make the various upgrade phases as concrete and as visible as possible, an end-state concept would include a set of visual representations of the control room before and after various upgrade phases to provide the context and a framework within which to consider the various options in the upgrade. This includes the various control systems, human-system interfaces to be replaced, and possible changes to operator workstations. This paper describes how this framework helps to ensure an integrated and cohesive outcome that is consistent with human factors engineering principles and also provide substantial improvement in operator performance. The paper further describes the application of this integrated approach in the

  14. Engineering growth factors for regenerative medicine applications.

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Aaron C.; Briquez, Priscilla S.; Hubbell, Jeffrey A.; Cochran, Jennifer R.

    2016-01-15

    Growth factors are important morphogenetic proteins that instruct cell behavior and guide tissue repair and renewal. Although their therapeutic potential holds great promise in regenerative medicine applications, translation of growth factors into clinical treatments has been hindered by limitations including poor protein stability, low recombinant expression yield, and suboptimal efficacy. This review highlights current tools, technologies, and approaches to design integrated and effective growth factor-based therapies for regenerative medicine applications. The first section describes rational and combinatorial protein engineering approaches that have been utilized to improve growth factor stability, expression yield, biodistribution, and serum half-life, or alter their cell trafficking behavior or receptor binding affinity. The second section highlights elegant biomaterial-based systems, inspired by the natural extracellular matrix milieu, that have been developed for effective spatial and temporal delivery of growth factors to cell surface receptors. Although appearing distinct, these two approaches are highly complementary and involve principles of molecular design and engineering to be considered in parallel when developing optimal materials for clinical applications.

  15. QR Factorization for the Cell Broadband Engine

    Directory of Open Access Journals (Sweden)

    Jakub Kurzak

    2009-01-01

    Full Text Available The QR factorization is one of the most important operations in dense linear algebra, offering a numerically stable method for solving linear systems of equations including overdetermined and underdetermined systems. Modern implementations of the QR factorization, such as the one in the LAPACK library, suffer from performance limitations due to the use of matrix–vector type operations in the phase of panel factorization. These limitations can be remedied by using the idea of updating of QR factorization, rendering an algorithm, which is much more scalable and much more suitable for implementation on a multi-core processor. It is demonstrated how the potential of the cell broadband engine can be utilized to the fullest by employing the new algorithmic approach and successfully exploiting the capabilities of the chip in terms of single instruction multiple data parallelism, instruction level parallelism and thread-level parallelism.

  16. Human Engineering Design Criteria for Modern Control/Display Components and Standard Parts.

    Science.gov (United States)

    1980-05-01

    Journal of Ergonomics and the Human Factors Journal indexes were reviewed. DDC and NASA STIF data bases were also searched. Human engineers specializing...addition, the Journal of Ergonomics and the Human Factors Journal indexes were reviewed. DDC and NASA STIF data bases were also searched. Human

  17. Human factors in agile manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Forsythe, C.

    1995-03-01

    As industries position themselves for the competitive markets of today, and the increasingly competitive global markets of the 21st century, agility, or the ability to rapidly develop and produce new products, represents a common trend. Agility manifests itself in many different forms, with the agile manufacturing paradigm proposed by the Iacocca Institute offering a generally accepted, long-term vision. In its many forms, common elements of agility or agile manufacturing include: changes in business, engineering and production practices, seamless information flow from design through production, integration of computer and information technologies into all facets of the product development and production process, application of communications technologies to enable collaborative work between geographically dispersed product development team members and introduction of flexible automation of production processes. Industry has rarely experienced as dramatic an infusion of new technologies or as extensive a change in culture and work practices. Human factors will not only play a vital role in accomplishing the technical and social objectives of agile manufacturing. but has an opportunity to participate in shaping the evolution of industry paradigms for the 21st century.

  18. NASA Space Human Factors Program

    Science.gov (United States)

    1992-01-01

    This booklet briefly and succinctly treats 23 topics of particular interest to the NASA Space Human Factors Program. Most articles are by different authors who are mainly NASA Johnson or NASA Ames personnel. Representative topics covered include mental workload and performance in space, light effects on Circadian rhythms, human sleep, human reasoning, microgravity effects and automation and crew performance.

  19. Research on disaster prevention by human factor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bok Youn; Kang, Chang Hee; Kang, Sun Duck; Jo, Young Do [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    Mining, by its very nature, requires workers and technology to function in an unpredictable environment that can not easily be engineered to accommodate human factors. Miners' physical and cognitive capabilities are sometimes stretched to the point that 'human error' in performance result. Mine safety researchers estimate that 50-85% of all mining injuries are due, in large part, to human error. Further research suggests that the primary causes of these errors in performance lie outside the individual and can be minimized by improvements in equipment design, work environments, work procedures and training. The human factors research is providing the science needed to determine which aspects of the mining environment can be made more worker-friendly and how miners can work more safely in environments that can not be improved. Underground mines have long been recognized as an innately hazardous and physically demanding work environment. Recently, mining is becoming a more complicated process as more sophisticated technologies are introduced. The more complicated or difficult the tasks to be performed, the more critical it is to have a systematic understanding of the humans, the technology, the environments, and how they interact. Human factors is a key component in solving most of today's mine safety and health problems. Human factors research primarily centered around solving problems in the following four areas: 1) How mining methods and equipment affect safety, 2) Evaluating the fit between miner's physical capabilities and the demands of their job, 3) Improving miner's ability to perceive and react to hazards, 4) Understanding how organizational and managerial variables influence safety. Human factor research was begun during the World war II. National Coal Board (British Coal) of Great Britain commenced ergonomics in 1969, and Bureau of Mine of United States started human factor researches in same year. Japan has very short history

  20. Human factors in resuscitation teaching.

    Science.gov (United States)

    Norris, Elizabeth M; Lockey, Andrew S

    2012-04-01

    There is an increasing interest in human factors within the healthcare environment reflecting the understanding of their impact on safety. The aim of this paper is to explore how human factors might be taught on resuscitation courses, and improve course outcomes in terms of improved mortality and morbidity for patients. The delivery of human factors training is important and this review explores the work that has been delivered already and areas for future research and teaching. Medline was searched using MESH terms Resuscitation as a Major concept and Patient or Leadership as core terms. The abstracts were read and 25 full length articles reviewed. Critical incident reporting has shown four recurring problems: lack of organisation at an arrest, lack of equipment, non functioning equipment, and obstructions preventing good care. Of these, the first relates directly to the concept of human factors. Team dynamics for both team membership and leadership, management of stress, conflict and the role of debriefing are highlighted. Possible strategies for teaching them are discussed. Four strategies for improving human factors training are discussed: team dynamics (including team membership and leadership behaviour), the influence of stress, debriefing, and conflict within teams. This review illustrates how human factor training might be integrated further into life support training without jeopardising the core content and lengthening the courses. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  1. Administrative Planning Factors in Engineering Education

    Science.gov (United States)

    Meriam, J. L.

    1970-01-01

    Results of a limited comparative study of selected parameters relating to the planning and financing of engineering education programs, sponsored by southeastern section of the American Society for Engineering Education. (IR)

  2. Suggestion: Human Factor Based User Interface Design Tool

    OpenAIRE

    S.Q. Abbas,; Rizwan Beg; Shahnaz Fatima

    2011-01-01

    In this paper, we introduce HFBUIT, Human Factor based user interface tool that enables designers and engineers to create human factor based user interface. This tool will help the designer to utilize the knowledge about the user to configure the interface for different users, i.e. each user may have different skills, level of experience, or cognitive and physical disabilities. The tool makes it easy to knowhuman factors & to reduce the number of usability problems. HFBUIT can be used in real...

  3. Human subject research for engineers a practical guide

    CERN Document Server

    de Winter, Joost C F

    2017-01-01

    This Brief introduces engineers to the main principles in ethics, research design, statistics, and publishing of human subject research. In recent years, engineering has become strongly connected to disciplines such as biology, medicine, and psychology. Often, engineers (and engineering students) are expected to perform human subject research. Typical human subject research topics conducted by engineers include human-computer interaction (e.g., evaluating the usability of software), exoskeletons, virtual reality, teleoperation, modelling of human behaviour and decision making (often within the framework of ‘big data’ research), product evaluation, biometrics, behavioural tracking (e.g., of work and travel patterns, or mobile phone use), transport and planning (e.g., an analysis of flows or safety issues), etc. Thus, it can be said that knowledge on how to do human subject research is indispensable for a substantial portion of engineers. Engineers are generally well trained in calculus and mechanics, but m...

  4. An improvement of the applicability of human factors guidelines for coping with human factors issues in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Y. H.; Lee, J. Y. [KAERI, Taejon (Korea, Republic of)

    2003-07-01

    Human factors have been well known as one of the key factors to the system effectiveness as well as the efficiency and safety of nuclear power plants(NPPs). Human factors engineering(HFE) are included in periodic safety review(PSR) on the existing NPPs and the formal safety assessment for the new ones. However, HFE for NPPs is still neither popular in practice nor concrete in methodology. Especially, the human factors guidelines, which are the most frequent form of human factors engineering in practice, reveal the limitations in their applications. We discuss the limitations and their casual factors found in human factors guidelines in order to lesson the workload of HFE practitioners and to improve the applicability of human factors guidelines. According to the purposes and the phases of HFE for NPPs, more selective items and specified criteria should be prepared carefully in the human factors guidelines for the each HFE applications in practice. These finding on the human factors guidelines can be transferred to the other HFE application field, such as military, aviation, telecommunication, HCI, and product safety.

  5. Human Factors in Financial Trading

    Science.gov (United States)

    Leaver, Meghan; Reader, Tom W.

    2016-01-01

    Objective This study tests the reliability of a system (FINANS) to collect and analyze incident reports in the financial trading domain and is guided by a human factors taxonomy used to describe error in the trading domain. Background Research indicates the utility of applying human factors theory to understand error in finance, yet empirical research is lacking. We report on the development of the first system for capturing and analyzing human factors–related issues in operational trading incidents. Method In the first study, 20 incidents are analyzed by an expert user group against a referent standard to establish the reliability of FINANS. In the second study, 750 incidents are analyzed using distribution, mean, pathway, and associative analysis to describe the data. Results Kappa scores indicate that categories within FINANS can be reliably used to identify and extract data on human factors–related problems underlying trading incidents. Approximately 1% of trades (n = 750) lead to an incident. Slip/lapse (61%), situation awareness (51%), and teamwork (40%) were found to be the most common problems underlying incidents. For the most serious incidents, problems in situation awareness and teamwork were most common. Conclusion We show that (a) experts in the trading domain can reliably and accurately code human factors in incidents, (b) 1% of trades incur error, and (c) poor teamwork skills and situation awareness underpin the most critical incidents. Application This research provides data crucial for ameliorating risk within financial trading organizations, with implications for regulation and policy. PMID:27142394

  6. HUMAN PROSTATE CANCER RISK FACTORS

    Science.gov (United States)

    Prostate cancer has the highest prevalence of any non-skin cancer in the human body, with similar likelihood of neoplastic foci found within the prostates of men around the world regardless of diet, occupation, lifestyle, or other factors. Essentially all men with circulating an...

  7. Human-Centered Software Engineering: Software Engineering Architectures, Patterns, and Sodels for Human Computer Interaction

    Science.gov (United States)

    Seffah, Ahmed; Vanderdonckt, Jean; Desmarais, Michel C.

    The Computer-Human Interaction and Software Engineering (CHISE) series of edited volumes originated from a number of workshops and discussions over the latest research and developments in the field of Human Computer Interaction (HCI) and Software Engineering (SE) integration, convergence and cross-pollination. A first volume in this series (CHISE Volume I - Human-Centered Software Engineering: Integrating Usability in the Development Lifecycle) aims at bridging the gap between the field of SE and HCI, and addresses specifically the concerns of integrating usability and user-centered systems design methods and tools into the software development lifecycle and practices. This has been done by defining techniques, tools and practices that can fit into the entire software engineering lifecycle as well as by defining ways of addressing the knowledge and skills needed, and the attitudes and basic values that a user-centered development methodology requires. The first volume has been edited as Vol. 8 in the Springer HCI Series (Seffah, Gulliksen and Desmarais, 2005).

  8. Engineered human dicentric chromosomes show centromere plasticity.

    Science.gov (United States)

    Higgins, Anne W; Gustashaw, Karen M; Willard, Huntington F

    2005-01-01

    The centromere is essential for the faithful distribution of a cell's genetic material to subsequent generations. Despite intense scrutiny, the precise genetic and epigenetic basis for centromere function is still unknown. Here, we have used engineered dicentric human chromosomes to investigate mammalian centromere structure and function. We describe three classes of dicentric chromosomes isolated in different cell lines: functionally monocentric chromosomes, in which one of the two genetically identical centromeres is consistently inactivated; functionally dicentric chromosomes, in which both centromeres are consistently active; and dicentric chromosomes heterogeneous with respect to centromere activity. A study of serial single cell clones from heterogeneous cell lines revealed that while centromere activity is usually clonal, the centromere state (i.e. functionally monocentric or dicentric) in some lines can switch within a growing population of cells. Because pulsed field gel analysis indicated that the DNA at the centromeres of these chromosomes did not change detectably, this switching of the centromere state is most likely due to epigenetic changes. Inactivation of one of the two active centromeres in a functionally dicentric chromosome was observed in a percentage of cells after treatment with Trichostatin A, an inhibitor of histone deacetylation. This study provides evidence that the activity of human centromeres, while largely stable, can be subject to dynamic change, most likely due to epigenetic modification.

  9. Human Genetic Engineering: A Survey of Student Value Stances

    Science.gov (United States)

    Wilson, Sara McCormack; And Others

    1975-01-01

    Assesses the values of high school and college students relative to human genetic engineering and recommends that biology educators explore instructional strategies merging human genetic information with value clarification techniques. (LS)

  10. RNA-guided human genome engineering via Cas9

    National Research Council Canada - National Science Library

    Mali, Prashant; Yang, Luhan; Esvelt, Kevin M; Aach, John; Guell, Marc; DiCarlo, James E; Norville, Julie E; Church, George M

    2013-01-01

    .... We also compute a genome-wide resource of ~190 K unique gRNAs targeting ~40.5% of human exons. Our results establish an RNA-guided editing tool for facile, robust, and multiplexable human genome engineering.

  11. Motivational and adaptational factors of successful women engineers

    Science.gov (United States)

    Bornsen, Susan Edith

    It is no surprise that there is a shortage of women engineers. The reasons for the shortage have been researched and discussed in myriad papers, and suggestions for improvement continue to evolve. However, there are few studies that have specifically identified the positive aspects that attract women to engineering and keep them actively engaged in the field. This paper examines how women engineers view their education, their work, and their motivation to remain in the field. A qualitative research design was used to understand the motivation and adaptability factors women use to support their decision to major in engineering and stay in the engineering profession. Women engineers were interviewed using broad questions about motivation and adaptability. Interviews were transcribed and coded, looking for common threads of factors that suggest not only why women engineers persist in the field, but also how they thrive. Findings focus on the experiences, insights, and meaning of women interviewed. A grounded theory approach was used to describe the success factors found in practicing women engineers. The study found categories of attraction to the field, learning environment, motivation and adaptability. Sub-categories of motivation are intrinsic motivational factors such as the desire to make a difference, as well as extrinsic factors such as having an income that allows the kind of lifestyle that supports the family. Women engineers are comfortable with and enjoy working with male peers and when barriers arise, women learn to adapt in the male dominated field. Adaptability was indicated in areas of gender, culture, and communication. Women found strength in the ability to 'read' their clients, and provide insight to their teams. Sufficient knowledge from the field advances theory and offers strategies to programs for administrators and faculty of schools of engineering as well as engineering firms, who have interest in recruitment, and retention of female students

  12. Factors Related to Successful Engineering Team Design

    Science.gov (United States)

    Nowaczyk, Ronald H.; Zang, Thomas A.

    1998-01-01

    The perceptions of a sample of 49 engineers and scientists from NASA Langley Research Center toward engineering design teams were evaluated. The respondents rated 60 team behaviors in terms of their relative importance for team success. They also completed a profile of their own perceptions of their strengths and weaknesses as team members. Behaviors related to team success are discussed in terms of those involving the organizational culture and commitment to the team and those dealing with internal team dynamics. The latter behaviors included the level and extent of debate and discussion regarding methods for completing the team task and the efficient use of team time to explore and discuss methodologies critical to the problem. Successful engineering teams may find their greatest challenges occurring during the early stages of their existence. In contrast to the prototypical business team, members on an engineering design share expertise and knowledge which allows them to deal with task issues sooner. However, discipline differences among team members can lead to conflicts regarding the best method or approach to solving the engineering problem.

  13. A systems engineering view of the human in space

    Science.gov (United States)

    Anderson, John L.

    1987-01-01

    A model of the human as an 'engineered' system provides a starting point for determining human requirements and performance on an equivalent basis with technological systems. The human as an engineered system with performance requirements is defined to consist of four subsystems: cognitive, psychological, biomechanical, and biomedical. It is suggested that the treatment of the psychological subsystem as one that modulates the efficiency and quality of human performance offers a particular approach for examining and characterizing psychological effects.

  14. Integrating human factors and artificial intelligence in the development of human-machine cooperation

    NARCIS (Netherlands)

    Maanen, P.P. van; Lindenberg, J.; Neericx, M.A.

    2005-01-01

    Increasing machine intelligence leads to a shift from a mere interactive to a much more complex cooperative human-machine relation requiring a multidisciplinary development approach. This paper presents a generic multidisciplinary cognitive engineering method CE+ for the integration of human factors

  15. Human Factor Engineering Considerations for the Control Room of Nuclear Power Plant with Multiple Small Modular Reactors%多模块小型反应堆核电站控制室的人因工程考虑

    Institute of Scientific and Technical Information of China (English)

    贾倩倩; 刘鹏; 陈凡

    2015-01-01

    The nuclear system with multiple small modular reactors is a promising solution to realize the economics as well as maintain the safety features. The control room of the nuclear power plant with multiple SMRs is different with current pressured water reactors, these differences may have potential to impact human performance. These differences include the function analysis and function allocation, the staffing level and the staffing responsibilities, human machine interface design, situation awareness support, etc. This paper makes a review of the human factor engineering issues associated with the control room design of the plant with multiple SMRs. Some strategies are presented based on the experiences of the two-modular design of the high temperature gas-cooled pebble-bed modules (HTR-PM).%发展多模块式的小型堆核能系统,是保持小型模块式反应堆安全性的同时实现规模经济性的重要途径.多模块小型堆核能系统的控制室与目前压水堆核电站的控制室有很大区别,这些区别对控制室的人因工程可能存在潜在影响,具体包括:功能分析与功能分配、人员规模及分工、人机界面设计、操纵员的注意力等.本文综述了多模块小型堆核能系统的控制室设计中可能潜在的人因问题,并根据两模块高温气冷堆的初步设计经验,提出了对策.

  16. Local control stations: Human engineering issues and insights

    Energy Technology Data Exchange (ETDEWEB)

    Brown, W.S.; Higgins, J.C.; O`Hara, J.M. [Brookhaven National Lab., Upton, NY (United States)

    1994-09-01

    The objective of this research project was to evaluate current human engineering at local control stations (LCSs) in nuclear power plants, and to identify good human engineering practices relevant to the design of these operator interfaces. General literature and reports of operating experience were reviewed to determine the extent and type of human engineering deficiencies at LCSs in nuclear power plants. In-plant assessments were made of human engineering at single-function as well as multifunction LCSs. Besides confirming the existence of human engineering deficiencies at LCSs, the in-plant assessments provided information about the human engineering upgrades that have been made at nuclear power plants. Upgrades were typically the result of any of three influences regulatory activity, broad industry initiatives such as INPO, and specific in-plant programs (e.g. activities related to training). It is concluded that the quality of LCSs is quite variable and might be improved if there were greater awareness of good practices and existing human engineering guidance relevant to these operator interfaces, which is available from a variety of sources. To make such human engineering guidance more readily accessible, guidelines were compiled from such sources and included in the report as an appendix.

  17. A Human Factors Analysis and Classification System (HFACS) Examination of Commercial Vessel Accidents

    Science.gov (United States)

    2012-09-01

    experienced workers, such as in an apprenticeship . The amount of conscious decision- making or cognitive thinking is higher than in rule-based...human-machine interaction : an approach to cognitive engineering . North-Holland: Elsevier Science. Rasmussen, J. (1983). Skills, rules, and... Engineering HFWG Human Factors Working Group HSI Human Systems Integration IMO International Maritime Organization IIC Investigator-in-Charge

  18. Trefoil factors in human milk

    DEFF Research Database (Denmark)

    Vestergaard, Else Marie; Nexø, Ebba; Wendt, A

    2008-01-01

    We measured concentrations of the gastrointestinal protective peptides Trefoil factors in human milk. By the use of in-house ELISA we detected high amounts of TFF3, less TFF1 and virtually no TFF2 in human breast milk obtained from 46 mothers with infants born extremely preterm (24-27 wk gestation......), preterm (28-37 wk gestation), and full term (38-42 wk gestation). Samples were collected during the first, second, third to fourth weeks and more than 4 wks postpartum. Median (range) TFF1 [TFF3] concentrations in human milk were 320 (30-34000) [1500 (150-27,000)] pmol/L in wk 1, 120 (30-720) [310 (50......-7100)] pmol/L in wk 2, 70 (20-670) [120 (20-650)] pmol/L in wks 3 to 4, and 60 (30-2500) [80 (20-540)] pmol/L in > 4 wks after delivery. The lowest concentrations of TFF1 and TFF3 were found later than 2 wks after birth. In conclusion, TFF was present in term and preterm human milk with rapidly declining...

  19. Recent progress in engineering human-associated microbiomes.

    Science.gov (United States)

    Yaung, Stephanie J; Church, George M; Wang, Harris H

    2014-01-01

    Recent progress in molecular biology and genetics opens up the possibility of engineering a variety of biological systems, from single-cellular to multicellular organisms. The consortia of microbes that reside on the human body, the human-associated microbiota, are particularly interesting as targets for forward engineering and manipulation due to their relevance in health and disease. New technologies in analysis and perturbation of the human microbiota will lead to better diagnostic and therapeutic strategies against diseases of microbial origin or pathogenesis. Here, we discuss recent advances that are bringing us closer to realizing the true potential of an engineered human-associated microbial community.

  20. Test Research on the Interface of Meituan.com in Human Factors Engineering%手机美团网界面人因工程学测试研究

    Institute of Scientific and Technical Information of China (English)

    郭庆钦; 张力; 方小勇

    2015-01-01

    美团网是2010年成立的团购网站,它专注于提升消费者的满意度,消费者的满意度决定了企业会不会被淘汰,所以不断地对服务进行优化,但是在对服务进行优化的同时,美团网界面也需要优化,因为用户是通过界面进行操作.该文以眼动追踪技术为载体,测试美团网界面存在的人因工程学问题,并给出改进意见.%Meituan.com set up in 2010 is a online group-purchasing website,which focus on improving consumer's satisfaction. consumer's satisfaction determines the enterprise whether be eliminated or not,so it constantly optimize the service.But at the same time,the interface also needs to be optimized, because the user is operating through the interface. In this paper,using eye tracking technology to test the interface of meituan.com existing problems in human factors engineering,and giving the improv-ing advice.

  1. Restricting Factors at Modification of Parameters of Associative Engineering Objects

    Science.gov (United States)

    Horváth, László

    Advancements in product development have reached full integration of engineering activities and processes in product lifecycle management (PLM) systems. PLM systems are based on high-level modeling, simulation and data management. Despite significant development of modeling in PLM systems, a strong demand was recognized for improved decision assistance in product development. Decision assistance can be improved by application of methods from the area of computer intelligence. In order for a product development company to stay competitive, it is important for its modeling system to be relied on local even personal knowledge. The authors analyzed current PLM systems for shortcomings and possibilities for extended intelligence at decision-making during product development. They propose methods in order to increase suitability of current modeling systems to accommodate knowledge based IT at definition of sets of parameters of modeled objects and in the management of frequent changes of modeled objects. In the center of the proposed methodology, constrained parameters act as restricting factors at definition and modification of parameters of associative engineering objects. Paper starts with an outlook to modeling in current engineering systems and preliminary results by the authors. Following this, groups of essential information as handled by he proposed modeling are summarized and procedures for processing of that groups of information are detailed. Next, management of chains of changes along chains of associa-tive product objects and a new style of decision assistance in modeling systems are explained. Changes are created or verified by behavior analysis. Finally, behavior analysis, human intent combination, product data view creation, and change management are discussed as the proposed integrated and coordinated methodology for enhanced support of decision-making in product development.

  2. Human Engineering Modeling and Performance Lab Study Project

    Science.gov (United States)

    Oliva-Buisson, Yvette J.

    2014-01-01

    The HEMAP (Human Engineering Modeling and Performance) Lab is a joint effort between the Industrial and Human Engineering group and the KAVE (Kennedy Advanced Visualiations Environment) group. The lab consists of sixteen camera system that is used to capture human motions and operational tasks, through te use of a Velcro suit equipped with sensors, and then simulate these tasks in an ergonomic software package know as Jac, The Jack software is able to identify the potential risk hazards.

  3. Characterization of human myoblast cultures for tissue engineering.

    Science.gov (United States)

    Stern-Straeter, Jens; Bran, Gregor; Riedel, Frank; Sauter, Alexander; Hörmann, Karl; Goessler, Ulrich Reinhart

    2008-01-01

    Skeletal muscle tissue engineering, a promising specialty, aims at the reconstruction of skeletal muscle loss. In vitro tissue engineering attempts to achieve this goal by creating differentiated, functional muscle tissue through a process in which stem cells are extracted from the patient, e.g. by muscle biopsies, expanded and differentiated in a controlled environment, and subsequently re-implanted. A prerequisite for this undertaking is the ability to cultivate and differentiate human skeletal muscle cell cultures. Evidently, optimal culture conditions must be investigated for later clinical utilization. We therefore analysed the proliferation of human cells in different environments and evaluated the differentiation potential of different culture media. It was shown that human myoblasts have a higher rate of proliferation in the alamarBlue assay when cultured on gelatin-coated culture flasks rather than polystyrene-coated flasks. We also demonstrated that myoblasts treated with a culture medium with a high concentration of growth factors [growth medium (GM)] showed a higher proliferation compared to cultures treated with a culture medium with lower amounts of growth factors [differentiation medium (DM)]. Differentiation of human myoblast cell cultures treated with GM and DM was analysed until day 16 and myogenesis was verified by expression of MyoD, myogenin, alpha-sarcomeric actin and myosin heavy chain by semi-quantitative RT-PCR. Immunohistochemical staining for desmin, Myf-5 and alpha-sarcomeric actin was performed to verify the myogenic phenotype of extracted satellite cells and to prove the maturation of cells. Cultures treated with DM showed positive staining for alpha-sarcomeric actin. Notably, markers of differentiation were also detected in cultures treated with GM, but there was no formation of myotubes. In the enzymatic assay of creatine phosphokinase, cultures treated with DM showed a higher activity, evidencing a higher degree of differentiation

  4. Seeking perfection: a Kantian look at human genetic engineering.

    Science.gov (United States)

    Gunderson, Martin

    2007-01-01

    It is tempting to argue that Kantian moral philosophy justifies prohibiting both human germ-line genetic engineering and non-therapeutic genetic engineering because they fail to respect human dignity. There are, however, good reasons for resisting this temptation. In fact, Kant's moral philosophy provides reasons that support genetic engineering-even germ-line and non-therapeutic. This is true of Kant's imperfect duties to seek one's own perfection and the happiness of others. It is also true of the categorical imperative. Kant's moral philosophy does, however, provide limits to justifiable genetic engineering.

  5. Unmasking the social engineer the human element of security

    CERN Document Server

    Hadnagy, Christopher

    2014-01-01

    Learn to identify the social engineer by non-verbal behavior Unmasking the Social Engineer: The Human Element of Security focuses on combining the science of understanding non-verbal communications with the knowledge of how social engineers, scam artists and con men use these skills to build feelings of trust and rapport in their targets. The author helps readers understand how to identify and detect social engineers and scammers by analyzing their non-verbal behavior. Unmasking the Social Engineer shows how attacks work, explains nonverbal communications, and demonstrates with visuals the c

  6. Operations Research Techniques for Human Factors Engineers

    Science.gov (United States)

    1985-06-01

    distribution (for inverse transformations, see Daellenbach an3 others, p. 469; Hillier and Lieberman, p. 650; or Wagner, p. 930). viii) Decide whether... inverse relationship between size and usefulness was observed. h) Siegel, A.I., and Wolf, J.J. I Behavioral Simulation: Stateofthe-krt nd tTfns. XIprae...Castro Edi.f3cio C-6 Depto 501 Unidad ISSFAR Delegacion Titipan Mexico D.F. 16. B. Jay Mlartin Perceptronics 21111 Erwin St. Woodland Hills, CA 91367 192

  7. Human Factors Engineering. Part 1. Test Procedures

    Science.gov (United States)

    1990-05-15

    U.J@1 00 C 0O - ------ - D-4 1s Me/ 1SS0 TOP 1-2.610 0 c* m - 0 0 00 c 32 0 * y luowdinb3 *o gym * PIS 0 4UIJION Ps~nPO@j c APOG 0104M peonpolP...field telephones, hygenic items, flashlights, gas macks, cante3ns, axes, compasses, goggles, life preservers, etc. 2.6.2.22 .•TRUCTURAL COMPEN_._Ja are

  8. Development of human factors design review guidelines(II)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea)

    1998-06-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: 25. Human Factors Engineering Program Review Model and 26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation, which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents of NUREG-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994. (author). 11 refs., 2 figs., 2 tabs.

  9. Development of human factors design review guidelines(III)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Suh, Sang Moon; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1999-02-15

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25, human factors engineering program review model' and '26, review criteria for human factors aspects of advanced controls and instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and reviewing the reference documents NUREG--0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guides in KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm system. Then we will update the guidelines by reviewing the literature related to alarm design published after 1994.

  10. Design of a Human Reliability Assessment model for structural engineering

    NARCIS (Netherlands)

    De Haan, J.; Terwel, K.C.; Al-Jibouri, S.H.S.

    2013-01-01

    It is generally accepted that humans are the “weakest link” in structural design and construction processes. Despite this, few models are available to quantify human error within engineering processes. This paper demonstrates the use of a quantitative Human Reliability Assessment model within struct

  11. Development of an Integrated Human Factors Toolkit

    Science.gov (United States)

    Resnick, Marc L.

    2003-01-01

    An effective integration of human abilities and limitations is crucial to the success of all NASA missions. The Integrated Human Factors Toolkit facilitates this integration by assisting system designers and analysts to select the human factors tools that are most appropriate for the needs of each project. The HF Toolkit contains information about a broad variety of human factors tools addressing human requirements in the physical, information processing and human reliability domains. Analysis of each tool includes consideration of the most appropriate design stage, the amount of expertise in human factors that is required, the amount of experience with the tool and the target job tasks that are needed, and other factors that are critical for successful use of the tool. The benefits of the Toolkit include improved safety, reliability and effectiveness of NASA systems throughout the agency. This report outlines the initial stages of development for the Integrated Human Factors Toolkit.

  12. Meeting Human Reliability Requirements through Human Factors Design, Testing, and Modeling

    Energy Technology Data Exchange (ETDEWEB)

    R. L. Boring

    2007-06-01

    In the design of novel systems, it is important for the human factors engineer to work in parallel with the human reliability analyst to arrive at the safest achievable design that meets design team safety goals and certification or regulatory requirements. This paper introduces the System Development Safety Triptych, a checklist of considerations for the interplay of human factors and human reliability through design, testing, and modeling in product development. This paper also explores three phases of safe system development, corresponding to the conception, design, and implementation of a system.

  13. 2016 Annual Meeting of the German Human Factors and Ergonomics Society

    CERN Document Server

    Duckwitz, Sönke; Flemisch, Frank; Frenz, Martin; Kuz, Sinem; Mertens, Alexander; Mütze-Niewöhner, Susanne

    2017-01-01

    These proceedings summarize the best papers in each research area represented at the 2016 Annual Meeting of the German Human Factors and Ergonomics Society, held at Institute of Industrial Engineering and Ergonomics of RWTH Aachen University from March 2-4. The meeting featured more than 200 presentations and 36 posters reflecting the diversity of subject matter in the field of human and industrial engineering. This volume addresses human factors and safety specialists, industrial engineers, work and organizational psychologists, occupational medicines as well as production planners and design engineers.

  14. Inspiring engineering minds to advance human health: the Henry Samueli School of Engineering's Department of BME.

    Science.gov (United States)

    Lee, Abraham; Wirtanen, Erik

    2012-07-01

    The growth of biomedical engineering at The Henry Samueli School of Engineering at the University of California, Irvine (UCI) has been rapid since the Center for Biomedical Engineering was first formed in 1998 [and was later renamed as the Department of Biomedical Engineering (BME) in 2002]. Our current mission statement, “Inspiring Engineering Minds to Advance Human Health,” serves as a reminder of why we exist, what we do, and the core principles that we value and by which we abide. BME exists to advance the state of human health via engineering innovation and practices. To attain our goal, we are empowering our faculty to inspire and mobilize our students to address health problems. We treasure the human being, particularly the human mind and health. We believe that BME is where minds are nurtured, challenged, and disciplined, and it is also where the health of the human is held as a core mission value that deserves our utmost priority (Figure 1). Advancing human health is not a theoretical practice; it requires bridging between disciplines (engineering and medicine) and between communities (academic and industry).

  15. Advancing biomaterials of human origin for tissue engineering.

    Science.gov (United States)

    Chen, Fa-Ming; Liu, Xiaohua

    2016-02-01

    Biomaterials have played an increasingly prominent role in the success of biomedical devices and in the development of tissue engineering, which seeks to unlock the regenerative potential innate to human tissues/organs in a state of deterioration and to restore or reestablish normal bodily function. Advances in our understanding of regenerative biomaterials and their roles in new tissue formation can potentially open a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multi-component construction of native extracellular matrices (ECMs) for cell accommodation, the synthetic biomaterials produced today routinely incorporate biologically active components to define an artificial in vivo milieu with complex and dynamic interactions that foster and regulate stem cells, similar to the events occurring in a natural cellular microenvironment. The range and degree of biomaterial sophistication have also dramatically increased as more knowledge has accumulated through materials science, matrix biology and tissue engineering. However, achieving clinical translation and commercial success requires regenerative biomaterials to be not only efficacious and safe but also cost-effective and convenient for use and production. Utilizing biomaterials of human origin as building blocks for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural tissue with regard to its physical and chemical properties for the orchestration of wound healing and tissue regeneration. In addition to directly using tissue transfers and transplants for repair, new applications of human-derived biomaterials are now focusing on the use of naturally occurring biomacromolecules, decellularized ECM scaffolds and autologous preparations rich in growth factors/non-expanded stem cells to either target acceleration/magnification of the body's own repair capacity or use nature's paradigms to create new tissues for

  16. Requirements engineering for human activity systems

    CSIR Research Space (South Africa)

    Erasmus, J

    2014-10-01

    Full Text Available . Office of the Chief Engineer, NASA, 2007. —. Systems Engineering Handbook. Washington, D.C.: National Aeronautics and Space Administration, 2007. Office of the Deputy Under Secretary of Defense for Acquisition and Technology, Systems and Software... and special tools necessary to perform the verification (NASA 2007). This information will also allow for proper planning and scheduling of the verification activities to be performed throughout the development and realisation of the product. Measures...

  17. 76 FR 36543 - Draft Guidance for Industry and Food and Drug Administration Staff: Applying Human Factors and...

    Science.gov (United States)

    2011-06-22

    ... and Food and Drug Administration Staff: Applying Human Factors and Usability Engineering to Optimize... HUMAN SERVICES Food and Drug Administration Draft Guidance for Industry and Food and Drug Administration Staff: Applying Human Factors and Usability Engineering To Optimize Medical Device Design;...

  18. 重组人胰岛素样生长因子1工程菌的高密度发酵%High cell-density fermentation of recombinant human insulin-like growth factor-1 engineering bacteria

    Institute of Scientific and Technical Information of China (English)

    陈蔚青; 张建芬; 陈虹; 胡文浪

    2009-01-01

    BACKGROUND:Insulin-like growth factor-1(IGF-1)is an important cell factor which plays a special role in many disease treatments such as diabetes.The research of engineering bacteria fermentation production technology is great to IGF-1 industrialization and to clinical application.OBJECTIVE:To investigate the high cell-density fermentation and expression condition of recombinant human insulin-like growth factor-1(IGF-1) engineering bacteria.DESIGN,TIME AND SETTING:The enzyme,gene engineering,study was performed at the Biotechnological Laboratory of Zhejiang Shuren University from May 2007 to May 2008.MATERIALS:Recombinant E coli strain for IGF-1 expression as BL21 (DE3)/pET22a-IGF-1 was reserved in the Biotechnological Laboratory of Zhejiang Shuren University.Nutrient feed was composed of:glucose(300 g/L),peptone(40 g/L),yeast powder(10 g/L),Na2HPO4(280 mmol/L),Na2HPO4-2H2O2(120 mmol/L),MgSO4(10 mmol/L),and ampicillin(100 mg/L).METHODS:The strains were activated and then cultured in orbitaI shakers.Parameters such as types of media,isopropyl-β-D-thiogalactopyranoside(IPTG)concentration and induction time have been analyzed to explore optimaI fermentation conditions for expressing the recombinant protein.According to the optimal fermentation condition of orbitaI shakers.batch fermentation was carried on with 5 L-autocontroI fermentor.The process contained two stages:batch culture and fed-bafch through pH-stat solution.JPTG was added to jnduce the expression of protein in the middle and latter of the logarithmic growth phase for 4-βhours.MAIN OUTCOME MEASURES:Following described parameters were measured:fermentation and protein expression of the recombinant human IGF-1 engineering bacteria,cell concentration,cell dry weigh,objective protein,glucose concentration.RESULTS:Cells were cultured in 2×YT+5 g,L glucose medium,induced by 0.8 mmol/L IPTG for 5 hours.By controlling dissolved oxygen and by pH-stat feeding solution,high cell-density and high protein expression

  19. Human factors analysis and design methods for nuclear waste retrieval systems. Human factors design methodology and integration plan

    Energy Technology Data Exchange (ETDEWEB)

    Casey, S.M.

    1980-06-01

    The purpose of this document is to provide an overview of the recommended activities and methods to be employed by a team of human factors engineers during the development of a nuclear waste retrieval system. This system, as it is presently conceptualized, is intended to be used for the removal of storage canisters (each canister containing a spent fuel rod assembly) located in an underground salt bed depository. This document, and the others in this series, have been developed for the purpose of implementing human factors engineering principles during the design and construction of the retrieval system facilities and equipment. The methodology presented has been structured around a basic systems development effort involving preliminary development, equipment development, personnel subsystem development, and operational test and evaluation. Within each of these phases, the recommended activities of the human engineering team have been stated, along with descriptions of the human factors engineering design techniques applicable to the specific design issues. Explicit examples of how the techniques might be used in the analysis of human tasks and equipment required in the removal of spent fuel canisters have been provided. Only those techniques having possible relevance to the design of the waste retrieval system have been reviewed. This document is intended to provide the framework for integrating human engineering with the rest of the system development effort. The activities and methodologies reviewed in this document have been discussed in the general order in which they will occur, although the time frame (the total duration of the development program in years and months) in which they should be performed has not been discussed.

  20. Cooperative and human aspects of software engineering: CHASE 2010

    DEFF Research Database (Denmark)

    Dittrich, Yvonne; Sharp, Helen C.; Winschiers Theophilus, Heike

    2010-01-01

    Software is created by people -- software engineers in cooperation with domain experts, users and other stakeholders--in varied environments, under various conditions. Thus understanding cooperative and human aspects of software development is crucial to comprehend how and which methods and tools...... are required, to improve the creation and maintenance of software. The 3rd workshop on Cooperative and Human Aspects of Software Engineering held at the International Conference on Software Engineering continued the tradition from earlier workshops and provided a lively forum to discuss current developments...... and high quality research in the field. Further dissemination of research results will lead to an improvement of software development and deployment across the globe....

  1. Tissue Engineering Using Transfected Growth-Factor Genes

    Science.gov (United States)

    Madry, Henning; Langer, Robert S.; Freed, Lisa E.; Trippel, Stephen; Vunjak-Novakovic, Gordana

    2005-01-01

    A method of growing bioengineered tissues includes, as a major component, the use of mammalian cells that have been transfected with genes for secretion of regulator and growth-factor substances. In a typical application, one either seeds the cells onto an artificial matrix made of a synthetic or natural biocompatible material, or else one cultures the cells until they secrete a desired amount of an extracellular matrix. If such a bioengineered tissue construct is to be used for surgical replacement of injured tissue, then the cells should preferably be the patient s own cells or, if not, at least cells matched to the patient s cells according to a human-leucocyteantigen (HLA) test. The bioengineered tissue construct is typically implanted in the patient's injured natural tissue, wherein the growth-factor genes enhance metabolic functions that promote the in vitro development of functional tissue constructs and their integration with native tissues. If the matrix is biodegradable, then one of the results of metabolism could be absorption of the matrix and replacement of the matrix with tissue formed at least partly by the transfected cells. The method was developed for articular chondrocytes but can (at least in principle) be extended to a variety of cell types and biocompatible matrix materials, including ones that have been exploited in prior tissue-engineering methods. Examples of cell types include chondrocytes, hepatocytes, islet cells, nerve cells, muscle cells, other organ cells, bone- and cartilage-forming cells, epithelial and endothelial cells, connective- tissue stem cells, mesodermal stem cells, and cells of the liver and the pancreas. Cells can be obtained from cell-line cultures, biopsies, and tissue banks. Genes, molecules, or nucleic acids that secrete factors that influence the growth of cells, the production of extracellular matrix material, and other cell functions can be inserted in cells by any of a variety of standard transfection techniques.

  2. Human factors systems approach to healthcare quality and patient safety

    Science.gov (United States)

    Carayon, Pascale; Wetterneck, Tosha B.; Rivera-Rodriguez, A. Joy; Hundt, Ann Schoofs; Hoonakker, Peter; Holden, Richard; Gurses, Ayse P.

    2013-01-01

    Human factors systems approaches are critical for improving healthcare quality and patient safety. The SEIPS (Systems Engineering Initiative for Patient Safety) model of work system and patient safety is a human factors systems approach that has been successfully applied in healthcare research and practice. Several research and practical applications of the SEIPS model are described. Important implications of the SEIPS model for healthcare system and process redesign are highlighted. Principles for redesigning healthcare systems using the SEIPS model are described. Balancing the work system and encouraging the active and adaptive role of workers are key principles for improving healthcare quality and patient safety. PMID:23845724

  3. Reverse engineering human neurodegenerative disease using pluripotent stem cell technology.

    Science.gov (United States)

    Liu, Ying; Deng, Wenbin

    2016-05-01

    With the technology of reprogramming somatic cells by introducing defined transcription factors that enables the generation of "induced pluripotent stem cells (iPSCs)" with pluripotency comparable to that of embryonic stem cells (ESCs), it has become possible to use this technology to produce various cells and tissues that have been difficult to obtain from living bodies. This advancement is bringing forth rapid progress in iPSC-based disease modeling, drug screening, and regenerative medicine. More and more studies have demonstrated that phenotypes of adult-onset neurodegenerative disorders could be rather faithfully recapitulated in iPSC-derived neural cell cultures. Moreover, despite the adult-onset nature of the diseases, pathogenic phenotypes and cellular abnormalities often exist in early developmental stages, providing new "windows of opportunity" for understanding mechanisms underlying neurodegenerative disorders and for discovering new medicines. The cell reprogramming technology enables a reverse engineering approach for modeling the cellular degenerative phenotypes of a wide range of human disorders. An excellent example is the study of the human neurodegenerative disease amyotrophic lateral sclerosis (ALS) using iPSCs. ALS is a progressive neurodegenerative disease characterized by the loss of upper and lower motor neurons (MNs), culminating in muscle wasting and death from respiratory failure. The iPSC approach provides innovative cell culture platforms to serve as ALS patient-derived model systems. Researchers have converted iPSCs derived from ALS patients into MNs and various types of glial cells, all of which are involved in ALS, to study the disease. The iPSC technology could be used to determine the role of specific genetic factors to track down what's wrong in the neurodegenerative disease process in the "disease-in-a-dish" model. Meanwhile, parallel experiments of targeting the same specific genes in human ESCs could also be performed to control

  4. Human Factors Plan for Maritime Safety

    Science.gov (United States)

    1993-02-01

    HUMAN FACTORS ISSUES IN THE MARITIME ENVIRONMENT .............. 13 2. 1 DEFINITION OF HUMAN FACTORS ISSUES ........................ 13 2.2 CONTENT...The dotted line around the human factors technical basis in Figure 1 signifies that it needs to be developed. Safety data Accidents ) Definition of...and activity surveys, but met with some resistance from the ship personnel, and so little quntitative data was available from this study. Subjective

  5. "Human Nature": Chemical Engineering Students' Ideas about Human Relationships with the Natural World

    Science.gov (United States)

    Goldman, Daphne; Assaraf, Orit Ben-Zvi; Shemesh, Julia

    2014-01-01

    While importance of environmental ethics, as a component of sustainable development, in preparing engineers is widely acknowledged, little research has addressed chemical engineers' environmental concerns. This study aimed to address this void by exploring chemical engineering students' values regarding human-nature relationships. The…

  6. "Human Nature": Chemical Engineering Students' Ideas about Human Relationships with the Natural World

    Science.gov (United States)

    Goldman, Daphne; Assaraf, Orit Ben-Zvi; Shemesh, Julia

    2014-01-01

    While importance of environmental ethics, as a component of sustainable development, in preparing engineers is widely acknowledged, little research has addressed chemical engineers' environmental concerns. This study aimed to address this void by exploring chemical engineering students' values regarding human-nature relationships. The study was…

  7. NASA information sciences and human factors program

    Science.gov (United States)

    Holcomb, Lee; Hood, Ray; Montemerlo, Melvin; Jenkins, James; Smith, Paul; Dibattista, John; Depaula, Ramon; Hunter, Paul; Lavery, David

    1991-01-01

    The FY-90 descriptions of technical accomplishments are contained in seven sections: Automation and Robotics, Communications, Computer Sciences, Controls and Guidance, Data Systems, Human Factors, and Sensor Technology.

  8. Genetic engineering of human pluripotent cells using TALE nucleases.

    Science.gov (United States)

    Hockemeyer, Dirk; Wang, Haoyi; Kiani, Samira; Lai, Christine S; Gao, Qing; Cassady, John P; Cost, Gregory J; Zhang, Lei; Santiago, Yolanda; Miller, Jeffrey C; Zeitler, Bryan; Cherone, Jennifer M; Meng, Xiangdong; Hinkley, Sarah J; Rebar, Edward J; Gregory, Philip D; Urnov, Fyodor D; Jaenisch, Rudolf

    2011-07-07

    Targeted genetic engineering of human pluripotent cells is a prerequisite for exploiting their full potential. Such genetic manipulations can be achieved using site-specific nucleases. Here we engineered transcription activator-like effector nucleases (TALENs) for five distinct genomic loci. At all loci tested we obtained human embryonic stem cell (ESC) and induced pluripotent stem cell (iPSC) clones carrying transgenic cassettes solely at the TALEN-specified location. Our data suggest that TALENs employing the specific architectures described here mediate site-specific genome modification in human pluripotent cells with similar efficiency and precision as do zinc-finger nucleases (ZFNs).

  9. Buried waste integrated demonstration human engineered control station. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This document describes the Human Engineered Control Station (HECS) project activities including the conceptual designs. The purpose of the HECS is to enhance the effectiveness and efficiency of remote retrieval by providing an integrated remote control station. The HECS integrates human capabilities, limitations, and expectations into the design to reduce the potential for human error, provides an easy system to learn and operate, provides an increased productivity, and reduces the ultimate investment in training. The overall HECS consists of the technology interface stations, supporting engineering aids, platform (trailer), communications network (broadband system), and collision avoidance system.

  10. Design for human factors (DfHF): a grounded theory for integrating human factors into production design processes.

    Science.gov (United States)

    Village, Judy; Searcy, Cory; Salustri, Filipo; Patrick Neumann, W

    2015-01-01

    The 'design for human factors' grounded theory explains 'how' human factors (HF) went from a reactive, after-injury programme in safety, to being proactively integrated into each step of the production design process. In this longitudinal case study collaboration with engineers and HF Specialists in a large electronics manufacturer, qualitative data (e.g. meetings, interviews, observations and reflections) were analysed using a grounded theory methodology. The central tenet in the theory is that when HF Specialists acclimated to the engineering process, language and tools, and strategically aligned HF to the design and business goals of the organisation, HF became a means to improve business performance. This led to engineers 'pulling' HF Specialists onto their team. HF targets were adopted into engineering tools to communicate HF concerns quantitatively, drive continuous improvement, visibly demonstrate change and lead to benchmarking. Senior management held engineers accountable for HF as a key performance indicator, thus integrating HF into the production design process. Practitioner Summary: Research and practice lack explanations about how HF can be integrated early in design of production systems. This three-year case study and the theory derived demonstrate how ergonomists changed their focus to align with design and business goals to integrate HF into the design process.

  11. Human Factors in the Management of Production

    DEFF Research Database (Denmark)

    Jensen, Per Langå; Alting, Leo

    2006-01-01

    challenges. Qualitative interviews with Danish stakeholders in the education of engineers (BA & MA) confirm the picture given in international literature. Therefore, the didactics concerning the ‘human factor’ in the curriculum on production management has to reflect these changes. This paper concludes...... with a proposal on essential issues to be addressed in the curriculum qualifying university candidates to production management....

  12. Inhalation devices and patient interface: human factors.

    Science.gov (United States)

    Leiner, Stefan; Parkins, David; Lastow, Orest

    2015-03-01

    The development of any inhalation product that does not consider the patient needs will fail. The needs of the patients must be identified and aligned with engineering options and physical laws to achieve a robust and intuitive-to-use inhaler. A close interaction between development disciplines and real-use evaluations in clinical studies or in human factor studies is suggested. The same holds true when a marketed product needs to be changed. Caution is warranted if an inhaler change leads to a change in the way the patient handles the device. Finally, the article points out potential problems if many inhaler designs are available. Do they confuse the patients? Can patients recall the correct handling of each inhaler they use? How large is the risk that different inhaler designs pose to the public health? The presentations were given at the Orlando Inhalation Conference: Approaches in International Regulation co-organised by the University of Florida and the International Pharmaceutical Aerosol Consortium on Regulation & Science (IPAC-RS) in March 2014.

  13. Human Factors Aspects of Operating Small Reactors

    Energy Technology Data Exchange (ETDEWEB)

    OHara, J.M.; Higgins, J.; Deem, R. (BNL); Xing, J.; DAgostino, A. (NRC)

    2010-11-07

    The nuclear-power community has reached the stage of proposing advanced reactor designs to support power generation for decades to come. They are considering small modular reactors (SMRs) as one approach to meet these energy needs. While the power output of individual reactor modules is relatively small, they can be grouped to produce reactor sites with different outputs. Also, they can be designed to generate hydrogen, or to process heat. Many characteristics of SMRs are quite different from those of current plants, and so may require a concept of operations (ConOps) that also is different. The U.S. Nuclear Regulatory Commission (NRC) has begun examining the human factors engineering- (HFE) and ConOps- aspects of SMRs; if needed, they will formulate guidance to support SMR licensing reviews. We developed a ConOps model, consisting of the following dimensions: Plant mission; roles and responsibilities of all agents; staffing, qualifications, and training; management of normal operations; management of off-normal conditions and emergencies; and, management of maintenance and modifications. We are reviewing information on SMR design to obtain data about each of these dimensions, and have identified several preliminary issues. In addition, we are obtaining operations-related information from other types of multi-module systems, such as refineries, to identify lessons learned from their experience. Here, we describe the project's methodology and our preliminary findings.

  14. Human Factors Research and Nuclear Safety.

    Science.gov (United States)

    Moray, Neville P., Ed.; Huey, Beverly M., Ed.

    The Panel on Human Factors Research Needs in Nuclear Regulatory Research was formed by the National Research Council in response to a request from the Nuclear Regulatory Commission (NRC). The NRC asked the research council to conduct an 18-month study of human factors research needs for the safe operation of nuclear power plants. This report…

  15. Human Factors Simulation in Construction Management Education

    Science.gov (United States)

    Jaeger, M.; Adair, D.

    2010-01-01

    Successful construction management depends primarily on the representatives of the involved construction project parties. In addition to effective application of construction management tools and concepts, human factors impact significantly on the processes of any construction management endeavour. How can human factors in construction management…

  16. Unifying Human Centered Design and Systems Engineering for Human Systems Integration

    Science.gov (United States)

    Boy, Guy A.; McGovernNarkevicius, Jennifer

    2013-01-01

    Despite the holistic approach of systems engineering (SE), systems still fail, and sometimes spectacularly. Requirements, solutions and the world constantly evolve and are very difficult to keep current. SE requires more flexibility and new approaches to SE have to be developed to include creativity as an integral part and where the functions of people and technology are appropriately allocated within our highly interconnected complex organizations. Instead of disregarding complexity because it is too difficult to handle, we should take advantage of it, discovering behavioral attractors and the emerging properties that it generates. Human-centered design (HCD) provides the creativity factor that SE lacks. It promotes modeling and simulation from the early stages of design and throughout the life cycle of a product. Unifying HCD and SE will shape appropriate human-systems integration (HSI) and produce successful systems.

  17. Cooperative and human aspects of software engineering: CHASE 2010

    DEFF Research Database (Denmark)

    Dittrich, Yvonne; Sharp, Helen C.; Winschiers Theophilus, Heike;

    2010-01-01

    are required, to improve the creation and maintenance of software. The 3rd workshop on Cooperative and Human Aspects of Software Engineering held at the International Conference on Software Engineering continued the tradition from earlier workshops and provided a lively forum to discuss current developments...... and high quality research in the field. Further dissemination of research results will lead to an improvement of software development and deployment across the globe....

  18. Engineering

    National Research Council Canada - National Science Library

    Includes papers in the following fields: Aerospace Engineering, Agricultural Engineering, Chemical Engineering, Civil Engineering, Electrical Engineering, Environmental Engineering, Industrial Engineering, Materials Engineering, Mechanical...

  19. Human factors in healthcare level one

    CERN Document Server

    Rosenorn-Lanng, Debbie

    2014-01-01

    The majority of errors, litigation, and complaints in the health service are due to 'human factors', yet the term is still not widely understood and is sometimes used interchangeably to refer to team training or communication skills. Although including these, the subject of 'human factors' goes far beyond this to look at systems, environmental influences, and interactions with equipment, in addition to self-awareness and human interaction. All of these aspects are captured inHuman Factors in Healthcare and are built into a new framework: the SHEEP model, which breaks down into five key areas:

  20. Implementing human factors in clinical practice

    Science.gov (United States)

    Timmons, Stephen; Baxendale, Bryn; Buttery, Andrew; Miles, Giulia; Roe, Bridget; Browes, Simon

    2015-01-01

    Objectives To understand whether aviation-derived human factors training is acceptable and useful to healthcare professionals. To understand whether and how healthcare professionals have been able to implement human factors approaches to patient safety in their own area of clinical practice. Methods Qualitative, longitudinal study using semi-structured interviews and focus groups, of a multiprofessional group of UK NHS staff (from the emergency department and operating theatres) who have received aviation-derived human factors training. Results The human factors training was evaluated positively, and thought to be both acceptable and relevant to practice. However, the staff found it harder to implement what they had learned in their own clinical areas, and this was principally attributed to features of the informal organisational cultures. Conclusions In order to successfully apply human factors approaches in hospital, careful consideration needs to be given to the local context and informal culture of clinical practice. PMID:24631959

  1. Cooperative and Human Aspects of Software Engineering (CHASE 2008)

    DEFF Research Database (Denmark)

    2008-01-01

    The CHASE 2008 workshop is concerned with exploring the cooperative and human aspects of software engineering, and providing a forum for discussing high-quality research. Accepted papers reflect diversity of the field of software engineering – ranging from requirements to testing, and from...... ethnographic research to experiments. Moreover, the background of attendees reflects the diversity of researchers in this domain, ranging from sociology to psychology, from informatics to software engineering. CHASE 1008 met its goals in presenting high-quality research and building community through a mixture...

  2. Cooperative and Human Aspects of Software Engineering (CHASE 2008)

    DEFF Research Database (Denmark)

    2008-01-01

    The CHASE 2008 workshop is concerned with exploring the cooperative and human aspects of software engineering, and providing a forum for discussing high-quality research. Accepted papers reflect diversity of the field of software engineering – ranging from requirements to testing, and from...... ethnographic research to experiments. Moreover, the background of attendees reflects the diversity of researchers in this domain, ranging from sociology to psychology, from informatics to software engineering. CHASE 1008 met its goals in presenting high-quality research and building community through a mixture...

  3. Plant-Derived Human Collagen Scaffolds for Skin Tissue Engineering

    Science.gov (United States)

    Willard, James J.; Drexler, Jason W.; Das, Amitava; Roy, Sashwati; Shilo, Shani; Shoseyov, Oded

    2013-01-01

    Tissue engineering scaffolds are commonly formed using proteins extracted from animal tissues, such as bovine hide. Risks associated with the use of these materials include hypersensitivity and pathogenic contamination. Human-derived proteins lower the risk of hypersensitivity, but possess the risk of disease transmission. Methods engineering recombinant human proteins using plant material provide an alternate source of these materials without the risk of disease transmission or concerns regarding variability. To investigate the utility of plant-derived human collagen (PDHC) in the development of engineered skin (ES), PDHC and bovine hide collagen were formed into tissue engineering scaffolds using electrospinning or freeze-drying. Both raw materials were easily formed into two common scaffold types, electrospun nonwoven scaffolds and lyophilized sponges, with similar architectures. The processing time, however, was significantly lower with PDHC. PDHC scaffolds supported primary human cell attachment and proliferation at an equivalent or higher level than the bovine material. Interleukin-1 beta production was significantly lower when activated THP-1 macrophages where exposed to PDHC electrospun scaffolds compared to bovine collagen. Both materials promoted proper maturation and differentiation of ES. These data suggest that PDHC may provide a novel source of raw material for tissue engineering with low risk of allergic response or disease transmission. PMID:23298216

  4. Human factors analysis and design methods for nuclear waste retrieval systems: Human factors design methodology and integration plan

    Science.gov (United States)

    Casey, S. M.

    1980-06-01

    The nuclear waste retrieval system intended to be used for the removal of storage canisters (each canister containing a spent fuel rod assembly) located in an underground salt bed depository is discussed. The implementation of human factors engineering principles during the design and construction of the retrieval system facilities and equipment is reported. The methodology is structured around a basic system development effort involving preliminary development, equipment development, personnel subsystem development, and operational test and evaluation. Examples of application of the techniques in the analysis of human tasks, and equipment required in the removal of spent fuel canisters is provided. The framework for integrating human engineering with the rest of the system development effort is documented.

  5. Human factors in design modifications: panel alternative stop in Almaraz; Factores humanos en modificaciones de diseno: panel deparada alternativa en CN Almaraz

    Energy Technology Data Exchange (ETDEWEB)

    Roman, Y.; Bote, J.

    2015-07-01

    Human Factors Engineering has acquired a crucial role in the development of any design modification (DM), where every aspect relative to any interaction with the human user has to be taken into account at any stage thereof. Considering this, during the last years, Almaraz Nuclear Powe Plants has developed a program of Human Factors Engineering in order to reach the internationally recognized standards or systematic collected on NUREG 0711 Human Factors Engineering Program Review Model (NRC). One of the most important projects of this program at Almaraz Nuclear Power Plant has been the implementation of the Alternative Stop Panel and their corresponding Transfer Panels. (Author)

  6. Integrating the human element into the systems engineering process and MBSE methodology.

    Energy Technology Data Exchange (ETDEWEB)

    Tadros, Michael Samir.

    2013-12-01

    In response to the challenges related to the increasing size and complexity of systems, organizations have recognized the need to integrate human considerations in the beginning stages of systems development. Human Systems Integration (HSI) seeks to accomplish this objective by incorporating human factors within systems engineering (SE) processes and methodologies, which is the focus of this paper. A representative set of HSI methods from multiple sources are organized, analyzed, and mapped to the systems engineering Vee-model. These methods are then consolidated and evaluated against the SE process and Models-Based Systems Engineering (MBSE) methodology to determine where and how they could integrate within systems development activities in the form of specific enhancements. Overall conclusions based on these evaluations are presented and future research areas are proposed.

  7. Tissue-engineered microenvironment systems for modeling human vasculature.

    Science.gov (United States)

    Tourovskaia, Anna; Fauver, Mark; Kramer, Gregory; Simonson, Sara; Neumann, Thomas

    2014-09-01

    The high attrition rate of drug candidates late in the development process has led to an increasing demand for test assays that predict clinical outcome better than conventional 2D cell culture systems and animal models. Government agencies, the military, and the pharmaceutical industry have started initiatives for the development of novel in-vitro systems that recapitulate functional units of human tissues and organs. There is growing evidence that 3D cell arrangement, co-culture of different cell types, and physico-chemical cues lead to improved predictive power. A key element of all tissue microenvironments is the vasculature. Beyond transporting blood the microvasculature assumes important organ-specific functions. It is also involved in pathologic conditions, such as inflammation, tumor growth, metastasis, and degenerative diseases. To provide a tool for modeling this important feature of human tissue microenvironments, we developed a microfluidic chip for creating tissue-engineered microenvironment systems (TEMS) composed of tubular cell structures. Our chip design encompasses a small chamber that is filled with an extracellular matrix (ECM) surrounding one or more tubular channels. Endothelial cells (ECs) seeded into the channels adhere to the ECM walls and grow into perfusable tubular tissue structures that are fluidically connected to upstream and downstream fluid channels in the chip. Using these chips we created models of angiogenesis, the blood-brain barrier (BBB), and tumor-cell extravasation. Our angiogenesis model recapitulates true angiogenesis, in which sprouting occurs from a "parent" vessel in response to a gradient of growth factors. Our BBB model is composed of a microvessel generated from brain-specific ECs within an ECM populated with astrocytes and pericytes. Our tumor-cell extravasation model can be utilized to visualize and measure tumor-cell migration through vessel walls into the surrounding matrix. The described technology can be used

  8. The development and evaluation of human factors guidelines for the review of advanced human-system interfaces

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.M.

    1992-09-01

    Advanced control rooms for future nuclear power plants are being designed utilizing computer-based technologies. The US Nuclear Regulatory Commission reviews the human engineering of such control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are approximately supported in order to protect public health and safety. This paper describes the rationale, general approach, and initial development of an NRC Advanced Control Room Design Review Guideline.

  9. The development and evaluation of human factors guidelines for the review of advanced human-system interfaces

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J.M.

    1992-01-01

    Advanced control rooms for future nuclear power plants are being designed utilizing computer-based technologies. The US Nuclear Regulatory Commission reviews the human engineering of such control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are approximately supported in order to protect public health and safety. This paper describes the rationale, general approach, and initial development of an NRC Advanced Control Room Design Review Guideline.

  10. Development of a draft of human factors safety review procedures for the Korean next generation reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Moon, B. S.; Park, J. C.; Lee, Y. H.; Oh, I. S.; Lee, H. C. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-02-01

    In this study, a draft of human factors engineering (HFE) safety review procedures (SRP) was developed for the safety review of KNGR based on HFE Safety and Regulatory Requirements and Guidelines (SRRG). This draft includes acceptance criteria, review procedure, and evaluation findings for the areas of review including HFE Program Management, Human Factors Analyses, Human Factors Design, and HFE Verification and Validation, based on Section 15.1 'Human Factors Engineering Design Process' and 15.2 'Control Room Human Factors Engineering' of KNGR Specific Safety Requirements and Chapter 15 'Human Factors Engineering' of KNGR Safety Regulatory Guides. For the effective review, human factors concerns or issues related to advanced HSI design that have been reported so far should be extensively examined. In this study, a total of 384 human factors issues related to the advanced HSI design were collected through our review of a total of 145 documents. A summary of each issue was described and the issues were identified by specific features of HSI design. These results were implemented into a database system. 8 refs., 2 figs. (Author)

  11. Human factors in safety and business management.

    Science.gov (United States)

    Vogt, Joachim; Leonhardt, Jorg; Koper, Birgit; Pennig, Stefan

    2010-02-01

    Human factors in safety is concerned with all those factors that influence people and their behaviour in safety-critical situations. In aviation these are, for example, environmental factors in the cockpit, organisational factors such as shift work, human characteristics such as ability and motivation of staff. Careful consideration of human factors is necessary to improve health and safety at work by optimising the interaction of humans with their technical and social (team, supervisor) work environment. This provides considerable benefits for business by increasing efficiency and by preventing incidents/accidents. The aim of this paper is to suggest management tools for this purpose. Management tools such as balanced scorecards (BSC) are widespread instruments and also well known in aviation organisations. Only a few aviation organisations utilise management tools for human factors although they are the most important conditions in the safety management systems of aviation organisations. One reason for this is that human factors are difficult to measure and therefore also difficult to manage. Studies in other domains, such as workplace health promotion, indicate that BSC-based tools are useful for human factor management. Their mission is to develop a set of indicators that are sensitive to organisational performance and help identify driving forces as well as bottlenecks. Another tool presented in this paper is the Human Resources Performance Model (HPM). HPM facilitates the integrative assessment of human factors programmes on the basis of a systematic performance analysis of the whole system. Cause-effect relationships between system elements are defined in process models in a first step and validated empirically in a second step. Thus, a specific representation of the performance processes is developed, which ranges from individual behaviour to system performance. HPM is more analytic than BSC-based tools because HPM also asks why a certain factor is

  12. Human factors and simulation in emergency medicine.

    Science.gov (United States)

    Hayden, Emily M; Wong, Ambrose H; Ackerman, Jeremy; Sande, Margaret K; Lei, Charles; Kobayashi, Leo; Cassara, Michael; Cooper, Dylan D; Perry, Kimberly; Lewandowski, William E; Scerbo, Mark W

    2017-09-19

    This consensus group from the 2017 Academic Emergency Medicine Consensus Conference "Catalyzing System Change through Health Care Simulation: Systems, Competency, and Outcomes" held in Orlando, Florida on May 16, 2017 focused on the use of human factors and simulation in the field of emergency medicine. The human factors discipline is often underutilized within emergency medicine but has significant potential in improving the interface between technologies and individuals in the field. The discussion explored the domain of human factors, its benefits in medicine, how simulation can be a catalyst for human factors work in emergency medicine, and how emergency medicine can collaborate with human factors professionals to affect change. Implementing human factors in emergency medicine through healthcare simulation will require a demonstration of clinical and safety outcomes, advocacy to stakeholders and administrators, and establishment of structured collaborations between human factors professionals and emergency medicine, such as in this breakout group. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  13. Engineering large animal models of human disease.

    Science.gov (United States)

    Whitelaw, C Bruce A; Sheets, Timothy P; Lillico, Simon G; Telugu, Bhanu P

    2016-01-01

    The recent development of gene editing tools and methodology for use in livestock enables the production of new animal disease models. These tools facilitate site-specific mutation of the genome, allowing animals carrying known human disease mutations to be produced. In this review, we describe the various gene editing tools and how they can be used for a range of large animal models of diseases. This genomic technology is in its infancy but the expectation is that through the use of gene editing tools we will see a dramatic increase in animal model resources available for both the study of human disease and the translation of this knowledge into the clinic. Comparative pathology will be central to the productive use of these animal models and the successful translation of new therapeutic strategies.

  14. Genetically engineered mouse models and human osteosarcoma

    Directory of Open Access Journals (Sweden)

    Ng Alvin JM

    2012-10-01

    Full Text Available Abstract Osteosarcoma is the most common form of bone cancer. Pivotal insight into the genes involved in human osteosarcoma has been provided by the study of rare familial cancer predisposition syndromes. Three kindreds stand out as predisposing to the development of osteosarcoma: Li-Fraumeni syndrome, familial retinoblastoma and RecQ helicase disorders, which include Rothmund-Thomson Syndrome in particular. These disorders have highlighted the important roles of P53 and RB respectively, in the development of osteosarcoma. The association of OS with RECQL4 mutations is apparent but the relevance of this to OS is uncertain as mutations in RECQL4 are not found in sporadic OS. Application of the knowledge or mutations of P53 and RB in familial and sporadic OS has enabled the development of tractable, highly penetrant murine models of OS. These models share many of the cardinal features associated with human osteosarcoma including, importantly, a high incidence of spontaneous metastasis. The recent development of these models has been a significant advance for efforts to improve our understanding of the genetics of human OS and, more critically, to provide a high-throughput genetically modifiable platform for preclinical evaluation of new therapeutics.

  15. Fundamentals of systems ergonomics/human factors.

    Science.gov (United States)

    Wilson, John R

    2014-01-01

    Ergonomics/human factors is, above anything else, a systems discipline and profession, applying a systems philosophy and systems approaches. Many things are labelled as system in today's world, and this paper specifies just what attributes and notions define ergonomics/human factors in systems terms. These are obviously a systems focus, but also concern for context, acknowledgement of interactions and complexity, a holistic approach, recognition of emergence and embedding of the professional effort involved within organization system. These six notions are illustrated with examples from a large body of work on rail human factors.

  16. Handbook of Human Factors in Web Design

    CERN Document Server

    Vu, Kim-Phuong L

    2011-01-01

    The Handbook of Human Factors in Web Design covers basic human factors issues relating to screen design, input devices, and information organization and processing, as well as addresses newer features which will become prominent in the next generation of Web technologies. These include multimodal interfaces, wireless capabilities, and agents that can improve convenience and usability. Written by leading researchers and/or practitioners in the field, this volume reflects the varied backgrounds and interests of individuals involved in all aspects of human factors and Web design and includes chap

  17. Selecting measures for human factors research.

    Science.gov (United States)

    Kantowitz, B H

    1992-08-01

    Selecting measures is a necessary component of human factors research. Proper selection must take into account the representation problem (how is the assignment of numbers to objects or phenomena justified?) and the uniqueness problem (to what degree is this assignment unique?). Other key human factors measurement issues include subject representativeness, variable representativeness, and setting representativeness. It is difficult to create a single measure that captures essential characteristics of complex systems. Several examples illustrate how theory can guide measurement selection in such diverse human factors research as vigilance, turning off warning alarms, information requirements for military command centers, subjective workload, heart-rate signal analysis, and heat stress in nuclear power plants.

  18. Scaffold-free cartilage tissue engineering with a small population of human nasoseptal chondrocytes.

    Science.gov (United States)

    Chiu, Loraine L Y; To, William T H; Lee, John M; Waldman, Stephen D

    2017-03-01

    Cartilage tissue engineering is a promising approach to provide suitable materials for nasal reconstruction; however, it typically requires large numbers of cells. We have previously shown that a small number of chondrocytes cultivated within a continuous flow bioreactor can elicit substantial tissue growth, but translation to human chondrocytes is not trivial. Here, we aimed to demonstrate the application of the bioreactor to generate large-sized tissues from a small population of primary human nasoseptal chondrocytes. Experimental study. Chondrocytes were cultured in the bioreactor using different medium compositions, with varying amounts of serum and with or without growth factors. Resulting engineered tissues were analyzed for physical properties, biochemical composition, tissue microstructure, and protein localization. Bioreactor-cultivated constructs grown with serum and growth factors (basic fibroblast growth factor and transforming growth factor beta 2) had greater thickness, as well as DNA and glycosaminoglycan (GAG) contents, compared to low serum and no growth factor controls. These constructs also showed the most intense proteoglycan and collagen II staining. The combination of bioreactor conditions, serum, and growth factors allowed the generation of large, thick scaffold-free human cartilaginous tissues that resembled the native nasoseptal cartilage. There also may be implications for patient selection in future clinical applications of these engineered tissues because their GAG content decreased with donor age. NA. Laryngoscope, 127:E91-E99, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

  19. Study on Angiogenesis Factor of Human Osteosarcoma

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Angiogenesis factor of human osteosarcoma was partially purified and its biological features were studied. The active peptide with 8000 to 10 000 u molecular weight in the conditioned medium obtained from the cultivation of human osteosarcoma cells were partially purified by ultrafiltration, chromatography and dialysis. The angiogenic effects of the fractions were assessed by proliferation assay of human umbilical vein and pig aorta thoracic endothelial cells. The results showed that the chromatography fractions of 4 to 6 could significantly promote the proliferation of the endothelial cells. It was suggested that the human osteosarcoma cells could synthesize and secrete angiogenesis factor with a molecular weight of 8000 to 10 000 u.

  20. Human Systems Engineering: A Leadership Model for Collaboration and Change.

    Science.gov (United States)

    Clark, Karen L.

    Human systems engineering (HSE) was created to introduce a new way of viewing collaboration. HSE emphasizes the role of leaders who welcome risk, commit to achieving positive change, and help others achieve change. The principles of HSE and its successful application to the collaborative process were illustrated through a case study representing a…

  1. Training human mesenchymal stromal cells for bone tissue engineering applications

    NARCIS (Netherlands)

    Doorn, J.

    2012-01-01

    Human mesenchymal stromal cells (hMSCs) are an interesting source for cell therapies and tissue engineering applications, because these cells are able to differentiate into various target tissues, such as bone, cartilage, fat and endothelial cells. In addition, they secrete a wide array of growth fa

  2. Human factors and information transfer

    Science.gov (United States)

    Lee, Alfred T.

    1989-01-01

    Key problem areas in the management and transfer of information in the National Airspace System, contributing to human errors are identified. Information-management aspects supporting the user's ability to assess prevailing situations accurately with adequate time to make an informed decision are considered. The relationship between judgment biases and requirements for managing weather information is illustrated by examining such hazardous weather phenomena as microbursts and windshears. The system of air-ground communication relying almost exclusively on voice transmissions is discussed, and recommendations in the areas of communications procedures and technology development are provided.

  3. Human Factors Engineering. Part 2. HEDGE (Human Factors Engineering Data Guide for Evaluation)

    Science.gov (United States)

    1983-11-30

    1.8.2h. pot ons. ’a t.’l’t "A1e *He;gttr:o-drb raboa 5.3; Ř" , I H-dl’t’~is teOnt’,oi by 11h% oe i’t" t’.t~t . - ott e saetdrbh der; M"&’&W’h

  4. Human factors issues for interstellar spacecraft

    Science.gov (United States)

    Cohen, Marc M.; Brody, Adam R.

    1991-01-01

    Developments in research on space human factors are reviewed in the context of a self-sustaining interstellar spacecraft based on the notion of traveling space settlements. Assumptions about interstellar travel are set forth addressing costs, mission durations, and the need for multigenerational space colonies. The model of human motivation by Maslow (1970) is examined and directly related to the design of space habitat architecture. Human-factors technology issues encompass the human-machine interface, crew selection and training, and the development of spaceship infrastructure during transtellar flight. A scenario for feasible instellar travel is based on a speed of 0.5c, a timeframe of about 100 yr, and an expandable multigenerational crew of about 100 members. Crew training is identified as a critical human-factors issue requiring the development of perceptual and cognitive aids such as expert systems and virtual reality.

  5. Evaluating Human Factors in Augmented Reality Systems

    Science.gov (United States)

    2005-12-01

    user’s location and then per- forming the (cognitive) task of Mark A. Livingston Naval Research Laboratory Evaluating Human Factors in Augmented Reality ...00-00-2005 4. TITLE AND SUBTITLE Evaluating Human Factors in Augmented Reality Systems 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT...the basis for situation awareness or—in combina- tion with visual cues—a navigation task. Tactile tasks. Via haptic devices, we can apply vir- tual

  6. Space Human Factors: Research to Application

    Science.gov (United States)

    Woolford, Barbara

    2008-01-01

    Human Factors has been instrumental in preventing potential on-orbit hazards and increasing overall crew safety. Poor performance & operational learning curves on-orbit are mitigated. Human-centered design is applied to optimize design and minimize potentially hazardous conditions, especially with larger crew sizes and habitat constraints. Lunar and Mars requirements and design developments are enhanced, based on ISS Lessons Learned.

  7. HOW DO RADIOLOGISTS USE THE HUMAN SEARCH ENGINE?

    Science.gov (United States)

    Wolfe, Jeremy M; Evans, Karla K; Drew, Trafton; Aizenman, Avigael; Josephs, Emilie

    2016-06-01

    Radiologists perform many 'visual search tasks' in which they look for one or more instances of one or more types of target item in a medical image (e.g. cancer screening). To understand and improve how radiologists do such tasks, it must be understood how the human 'search engine' works. This article briefly reviews some of the relevant work into this aspect of medical image perception. Questions include how attention and the eyes are guided in radiologic search? How is global (image-wide) information used in search? How might properties of human vision and human cognition lead to errors in radiologic search?

  8. Human Systems Engineering for Launch processing at Kennedy Space Center (KSC)

    Science.gov (United States)

    Henderson, Gena; Stambolian, Damon B.; Stelges, Katrine

    2012-01-01

    Launch processing at Kennedy Space Center (KSC) is primarily accomplished by human users of expensive and specialized equipment. In order to reduce the likelihood of human error, to reduce personal injuries, damage to hardware, and loss of mission the design process for the hardware needs to include the human's relationship with the hardware. Just as there is electrical, mechanical, and fluids, the human aspect is just as important. The focus of this presentation is to illustrate how KSC accomplishes the inclusion of the human aspect in the design using human centered hardware modeling and engineering. The presentations also explain the current and future plans for research and development for improving our human factors analysis tools and processes.

  9. Incremental Scheduling Engines for Human Exploration of the Cosmos

    Science.gov (United States)

    Jaap, John; Phillips, Shaun

    2005-01-01

    As humankind embarks on longer space missions farther from home, the requirements and environments for scheduling the activities performed on these missions are changing. As we begin to prepare for these missions it is appropriate to evaluate the merits and applicability of the different types of scheduling engines. Scheduling engines temporally arrange tasks onto a timeline so that all constraints and objectives are met and resources are not overbooked. Scheduling engines used to schedule space missions fall into three general categories: batch, mixed-initiative, and incremental. This paper presents an assessment of the engine types, a discussion of the impact of human exploration of the moon and Mars on planning and scheduling, and the applicability of the different types of scheduling engines. This paper will pursue the hypothesis that incremental scheduling engines may have a place in the new environment; they have the potential to reduce cost, to improve the satisfaction of those who execute or benefit from a particular timeline (the customers), and to allow astronauts to plan their own tasks and those of their companion robots.

  10. Integration of Social Sciences and Humanities into Mechanical Engineering Curriculum

    Directory of Open Access Journals (Sweden)

    Nikša Dubreta

    2014-04-01

    Full Text Available Article deals with ways in which social sciences and humanities have been integrated from the 1980s to the present day into curriculum of Faculty of Mechanical Engineering and Naval Architecture at University of Zagreb, Croatia. After a brief review and summary of selected research and theoretical contributions to the subject theme, a specific research setting is indicated and contextualized. Elements of socio-historical approach are established primarily through analysis of corresponding documents: curriculums from the 1980s, 1990s and 2000s and from key documents on strategic development of the Faculty. It is stressed that social sciences and humanities topics are continually represented in mechanical engineering study program as legitimate, but separate unit, poorly integrated in the main engineering courses. Together with more or less expressed orientation toward micro-social and micro-economical issues in industry and business, it points to the main features in continuity of establishing the field of social sciences and humanities. Finally, it is shown that chances to widen and enrich aforementioned field are in close relation to the character of engineering and its social contextualization expressed in a key Faculty’s strategic documents.

  11. Normal human epithelial cells regulate the size and morphology of tissue-engineered capillaries.

    Science.gov (United States)

    Rochon, Marie-Hélène; Fradette, Julie; Fortin, Véronique; Tomasetig, Florence; Roberge, Charles J; Baker, Kathleen; Berthod, François; Auger, François A; Germain, Lucie

    2010-05-01

    The survival of thick tissues/organs produced by tissue engineering requires rapid revascularization after grafting. Although capillary-like structures have been reconstituted in some engineered tissues, little is known about the interaction between normal epithelial cells and endothelial cells involved in the in vitro angiogenic process. In the present study, we used the self-assembly approach of tissue engineering to examine this relationship. An endothelialized tissue-engineered dermal substitute was produced by adding endothelial cells to the tissue-engineered dermal substitute produced by the self-assembly approach. The latter consists in culturing fibroblasts in the medium supplemented with serum and ascorbic acid. A network of tissue-engineered capillaries (TECs) formed within the human extracellular matrix produced by dermal fibroblasts. To determine whether epithelial cells modify TECs, the size and form of TECs were studied in the endothelialized tissue-engineered dermal substitute cultured in the presence or absence of epithelial cells. In the presence of normal keratinocytes from skin, cornea or uterine cervix, endothelial cells formed small TECs (cross-sectional area estimated at less than 50 microm(2)) reminiscent of capillaries found in the skin's microcirculation. In contrast, TECs grown in the absence of epithelial cells presented variable sizes (larger than 50 microm(2)), but the addition of keratinocyte-conditioned media or exogenous vascular endothelial growth factor induced their normalization toward a smaller size. Vascular endothelial growth factor neutralization inhibited the effect of keratinocyte-conditioned media. These results provide new direct evidence that normal human epithelial cells play a role in the regulation of the underlying TEC network, and advance our knowledge in tissue engineering for the production of TEC networks in vitro.

  12. Human factors and safety in emergency medicine

    Science.gov (United States)

    Schaefer, H. G.; Helmreich, R. L.; Scheidegger, D.

    1994-01-01

    A model based on an input process and outcome conceptualisation is suggested to address safety-relevant factors in emergency medicine. As shown in other dynamic and demanding environments, human factors play a decisive role in attaining high quality service. Attitudes held by health-care providers, organisational shells and work-cultural parameters determine communication, conflict resolution and workload distribution within and between teams. These factors should be taken into account to improve outcomes such as operational integrity, job satisfaction and morale.

  13. Quarterly Bulletin of the Division of Mechanical Engineering and the National Aeronautical Establishment, 1 October to 31 December 1975.

    Science.gov (United States)

    AERONAUTICS, * MECHANICAL ENGINEERING , SHIPS, CONTROL SYSTEMS, AIRCRAFT, CANADA, HUMAN FACTORS ENGINEERING, GAS DYNAMICS, MECHANICS, FUELS, ENGINES, MARINE ENGINEERING, HYDRODYNAMICS, HARBORS, AERODYNAMICS, FLIGHT RECORDERS.

  14. Postures and Motions Library Development for Verification of Ground Crew Human Factors Requirements

    Science.gov (United States)

    Stambolian, Damon; Henderson, Gena; Jackson, Mariea Dunn; Dischinger, Charles

    2013-01-01

    Spacecraft and launch vehicle ground processing activities require a variety of unique human activities. These activities are being documented in a primitive motion capture library. The library will be used by human factors engineering analysts to infuse real to life human activities into the CAD models to verify ground systems human factors requirements. As the primitive models are being developed for the library, the project has selected several current human factors issues to be addressed for the Space Launch System (SLS) and Orion launch systems. This paper explains how the motion capture of unique ground systems activities is being used to verify the human factors engineering requirements for ground systems used to process the SLS and Orion vehicles, and how the primitive models will be applied to future spacecraft and launch vehicle processing.

  15. A development of the Human Factors Assessment Guide for the Study of Erroneous Human Behaviors in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Yeon Ju; Lee, Yong Hee; Jang, Tong Il; Kim, Sa Kil [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-08-15

    The aim of this paper is to describe a human factors assessment guide for the study of the erroneous characteristic of operators in nuclear power plants (NPPs). We think there are still remaining the human factors issues such as an uneasy emotion, fatigue and stress, varying mental workload situation by digital environment, and various new type of unsafe response to digital interface for better decisions, although introducing an advanced main control room. These human factors issues may not be resolved through the current human reliability assessment which evaluates the total probability of a human error occurring throughout the completion of a specific task. This paper provides an assessment guide for the human factors issues a set of experimental methodology, and presents an assessment case of measurement and analysis especially from neuro physiology approach. It would be the most objective psycho-physiological research technique on human performance for a qualitative analysis considering the safety aspects. This paper can be trial to experimental assessment of erroneous behaviors and their influencing factors, and it can be used as an index for recognition and a method to apply human factors engineering V and V, which is required as a mandatory element of human factor engineering program plan for a NPP design.

  16. Site-Specific Genome Engineering in Human Pluripotent Stem Cells

    Directory of Open Access Journals (Sweden)

    Sylvia Merkert

    2016-06-01

    Full Text Available The possibility to generate patient-specific induced pluripotent stem cells (iPSCs offers an unprecedented potential of applications in clinical therapy and medical research. Human iPSCs and their differentiated derivatives are tools for diseases modelling, drug discovery, safety pharmacology, and toxicology. Moreover, they allow for the engineering of bioartificial tissue and are promising candidates for cellular therapies. For many of these applications, the ability to genetically modify pluripotent stem cells (PSCs is indispensable, but efficient site-specific and safe technologies for genetic engineering of PSCs were developed only recently. By now, customized engineered nucleases provide excellent tools for targeted genome editing, opening new perspectives for biomedical research and cellular therapies.

  17. Site-Specific Genome Engineering in Human Pluripotent Stem Cells.

    Science.gov (United States)

    Merkert, Sylvia; Martin, Ulrich

    2016-06-24

    The possibility to generate patient-specific induced pluripotent stem cells (iPSCs) offers an unprecedented potential of applications in clinical therapy and medical research. Human iPSCs and their differentiated derivatives are tools for diseases modelling, drug discovery, safety pharmacology, and toxicology. Moreover, they allow for the engineering of bioartificial tissue and are promising candidates for cellular therapies. For many of these applications, the ability to genetically modify pluripotent stem cells (PSCs) is indispensable, but efficient site-specific and safe technologies for genetic engineering of PSCs were developed only recently. By now, customized engineered nucleases provide excellent tools for targeted genome editing, opening new perspectives for biomedical research and cellular therapies.

  18. Human factors design review guidelines for advanced nuclear control room technologies

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, J.; Brown, W. (Brookhaven National Lab., Upton, NY (United States)); Granda, T.; Baker, C. (Carlow Associates, Inc., Fairfax, VA (United States))

    1991-01-01

    Advanced control rooms (ACRs) for future nuclear power plants are being designed utilizing computer-based technologies. The US Nuclear Regulatory Commission reviews the human engineering aspects of such control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported in order to protect public health and safety. This paper describes the rationale, general approach, and initial development of an NRC Advanced Control Room Design Review Guideline. 20 refs., 1 fig.

  19. DRUMS: a human disease related unique gene mutation search engine.

    Science.gov (United States)

    Li, Zuofeng; Liu, Xingnan; Wen, Jingran; Xu, Ye; Zhao, Xin; Li, Xuan; Liu, Lei; Zhang, Xiaoyan

    2011-10-01

    With the completion of the human genome project and the development of new methods for gene variant detection, the integration of mutation data and its phenotypic consequences has become more important than ever. Among all available resources, locus-specific databases (LSDBs) curate one or more specific genes' mutation data along with high-quality phenotypes. Although some genotype-phenotype data from LSDB have been integrated into central databases little effort has been made to integrate all these data by a search engine approach. In this work, we have developed disease related unique gene mutation search engine (DRUMS), a search engine for human disease related unique gene mutation as a convenient tool for biologists or physicians to retrieve gene variant and related phenotype information. Gene variant and phenotype information were stored in a gene-centred relational database. Moreover, the relationships between mutations and diseases were indexed by the uniform resource identifier from LSDB, or another central database. By querying DRUMS, users can access the most popular mutation databases under one interface. DRUMS could be treated as a domain specific search engine. By using web crawling, indexing, and searching technologies, it provides a competitively efficient interface for searching and retrieving mutation data and their relationships to diseases. The present system is freely accessible at http://www.scbit.org/glif/new/drums/index.html.

  20. Improving human performance: Industry factors influencing the ability to perform

    Directory of Open Access Journals (Sweden)

    Güera Massyn Romo

    2013-03-01

    Full Text Available Learning interventions and new technologies that aim to improve human performance must take cognisance of industry factors inhibiting human performance. The dynamic and fast pace nature of the Information and Communication Technologies (ICT and the engineering industries do not lend themselves to proper skills planning and management. These industries experience real skills gaps, to some of which they contribute by themselves. This study reports on these performance-inhibiting factors such as the underutilisation of available skills, tolerance for individual preferences, and dynamically, and informally refining a role objective while an employee is occupying a certain role. The important professional skills required by individuals to cope with these real life factors are also explored in the skills gaps management context. Moreover, these industries need a profile they refer to as Special Forces, which denotes a high calibre of worker that possesses well-developed professional skills whilst having advanced technical expertise and sufficient experience. This resource profile is required largely due to the poor management of human resource processes in practice and the current reported lack of adequate skills. Furthermore, this study refers to the recent lack of a working definition for these Special Forces leading to the omitted active development of these profiles in industry today, which appears to become a key human performance inhibiting factor.

  1. Cooperative and Human Aspects of Software Engineering (CHASE 2010)

    DEFF Research Database (Denmark)

    Dittrich, Yvonne; De Souza, Cleidson; Korpela, Mikko

    2010-01-01

    Software is created by people---software engineers---working in varied environments, under various conditions. Thus understanding cooperative and human aspect of software development is crucial to comprehend how methods and tools are used, and thereby improving the creation and maintenance...... research on human and cooperative aspects of software engineering. We aim at providing both a meeting place for the growing community and the possibility for researchers interested in joining the field to present their work in progress and get an overview over the field....... of software. Inspired by the hosting country's concept of co-responsibility -- ubuntu -- we especially invited contributions that address community-based development like open source development and sustainability of ICT eco-systems. The goal of this workshop is to provide a forum for discussing high quality...

  2. Cooperative and Human Aspects of Software Engineering (CHASE 2010)

    DEFF Research Database (Denmark)

    Dittrich, Yvonne; De Souza, Cleidson; Korpela, Mikko

    2010-01-01

    of software. Inspired by the hosting country's concept of co-responsibility -- ubuntu -- we especially invited contributions that address community-based development like open source development and sustainability of ICT eco-systems. The goal of this workshop is to provide a forum for discussing high quality......Software is created by people---software engineers---working in varied environments, under various conditions. Thus understanding cooperative and human aspect of software development is crucial to comprehend how methods and tools are used, and thereby improving the creation and maintenance...... research on human and cooperative aspects of software engineering. We aim at providing both a meeting place for the growing community and the possibility for researchers interested in joining the field to present their work in progress and get an overview over the field....

  3. Computer aided systems human engineering: A hypermedia tool

    Science.gov (United States)

    Boff, Kenneth R.; Monk, Donald L.; Cody, William J.

    1992-01-01

    The Computer Aided Systems Human Engineering (CASHE) system, Version 1.0, is a multimedia ergonomics database on CD-ROM for the Apple Macintosh II computer, being developed for use by human system designers, educators, and researchers. It will initially be available on CD-ROM and will allow users to access ergonomics data and models stored electronically as text, graphics, and audio. The CASHE CD-ROM, Version 1.0 will contain the Boff and Lincoln (1988) Engineering Data Compendium, MIL-STD-1472D and a unique, interactive simulation capability, the Perception and Performance Prototyper. Its features also include a specialized data retrieval, scaling, and analysis capability and the state of the art in information retrieval, browsing, and navigation.

  4. Concise review: Human cell engineering: cellular reprogramming and genome editing.

    Science.gov (United States)

    Mali, Prashant; Cheng, Linzhao

    2012-01-01

    Cell engineering is defined here as the collective ability to both reset and edit the genome of a mammalian cell. Until recently, this had been extremely challenging to achieve as nontransformed human cells are significantly refractory to both these processes. The recent success in reprogramming somatic cells into induced pluripotent stem cells that are self-renewable in culture, coupled with our increasing ability to effect precise and predesigned genomic editing, now readily permits cellular changes at both the genetic and epigenetic levels. These dual capabilities also make possible the generation of genetically matched, disease-free stem cells from patients for regenerative medicine. The objective of this review is to summarize the key enabling developments on these two rapidly evolving research fronts in human cell engineering, highlight unresolved issues, and outline potential future research directions.

  5. Tissue engineered humanized bone supports human hematopoiesis in vivo.

    Science.gov (United States)

    Holzapfel, Boris M; Hutmacher, Dietmar W; Nowlan, Bianca; Barbier, Valerie; Thibaudeau, Laure; Theodoropoulos, Christina; Hooper, John D; Loessner, Daniela; Clements, Judith A; Russell, Pamela J; Pettit, Allison R; Winkler, Ingrid G; Levesque, Jean-Pierre

    2015-08-01

    Advances in tissue-engineering have resulted in a versatile tool-box to specifically design a tailored microenvironment for hematopoietic stem cells (HSCs) in order to study diseases that develop within this setting. However, most current in vivo models fail to recapitulate the biological processes seen in humans. Here we describe a highly reproducible method to engineer humanized bone constructs that are able to recapitulate the morphological features and biological functions of the HSC niches. Ectopic implantation of biodegradable composite scaffolds cultured for 4 weeks with human mesenchymal progenitor cells and loaded with rhBMP-7 resulted in the development of a chimeric bone organ including a large number of human mesenchymal cells which were shown to be metabolically active and capable of establishing a humanized microenvironment supportive of the homing and maintenance of human HSCs. A syngeneic mouse-to-mouse transplantation assay was used to prove the functionality of the tissue-engineered ossicles. We predict that the ability to tissue engineer a morphologically intact and functional large-volume bone organ with a humanized bone marrow compartment will help to further elucidate physiological or pathological interactions between human HSCs and their native niches. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

  6. Human Factors and IT Competitive Value

    Directory of Open Access Journals (Sweden)

    Alfonso Vargas

    2004-04-01

    Full Text Available This study analyzes the system of relationships that may explain the impact of information technology (IT on competitive advantage. In this social and economic system, the study focuses on the human factors that play a key role in IT effectiveness. This is a first step to empirically specifying which human resources can complement the effect of IT on organizations. The paper revisits the main theoretical frameworks that can explain the research issue and proposes an empirical model to test the hypotheses. The results, obtained from a Data Envelopment Analysis, show that there are some human factors that positively affect the influence of IT utilization on competitive advantage. Nevertheless, other structural, industrial and internal factors may play an important role in the relationship.

  7. Engineering Education Development to Enhance Human Skill in DENSO

    Science.gov (United States)

    Isogai, Emiko; Nuka, Takeji

    Importance of human skills such as communication or instruction capability to their staff members has recently been highlighted in a workplace, due to decreasing opportunity of face-to-face communication between supervisors and their staff, or Instruction capability through OJT (On the Job Training) . Currently, communication skills are being reinforced mainly through OJT at DENSO. Therefore, as part of supplemental support tools, DENSO has established comprehensive engineers training program on off-JT basis for developing human skills, covering from newly employeed enginners up to managerial class since 2003. This paper describes education activities and reports the results.

  8. TEPCO's Approach to Power-Engineer Human Resource Development

    Science.gov (United States)

    Sato, Masaki

    We think 'human resources and technology' is developed only by self-training continuously, keeping higher motivation and practicing repeatedly. Moreover it is indispensable for sustainable development of company. Management vision, top-down message with vertical communication, and bottom-up systematic approaches are necessary for sustainable human resource development, sharing the value with coordination, and in addition, OJT and Off-JT method should be used effectively. This paper shows TEPCO's attempts to develop engineers' technical skills as a reference of a in-company continuing professional development.

  9. Information sciences and human factors overview

    Science.gov (United States)

    Holcomb, Lee B.

    1988-01-01

    An overview of program objectives of the Information Sciences and Human Factors Division of NASA's Office of Aeronautics and Space Technology is given in viewgraph form. Information is given on the organizational structure, goals, the research and technology base, telerobotics, systems autonomy in space operations, space sensors, humans in space, space communications, space data systems, transportation vehicle guidance and control, spacecraft control, and major program directions in space.

  10. Tissue-engineered models of human tumors for cancer research

    Science.gov (United States)

    Villasante, Aranzazu; Vunjak-Novakovic, Gordana

    2015-01-01

    Introduction Drug toxicity often goes undetected until clinical trials, which are the most costly and dangerous phase of drug development. Both the cultures of human cells and animal studies have limitations that cannot be overcome by incremental improvements in drug-testing protocols. A new generation of bioengineered tumors is now emerging in response to these limitations, with potential to transform drug screening by providing predictive models of tumors within their tissue context, for studies of drug safety and efficacy. An area that could greatly benefit from these models is cancer research. Areas covered In this review, the authors first describe the engineered tumor systems, using Ewing's sarcoma as an example of human tumor that cannot be predictably studied in cell culture and animal models. Then, they discuss the importance of the tissue context for cancer progression and outline the biomimetic principles for engineering human tumors. Finally, they discuss the utility of bioengineered tumor models for cancer research and address the challenges in modeling human tumors for use in drug discovery and testing. Expert opinion While tissue models are just emerging as a new tool for cancer drug discovery, they are already demonstrating potential for recapitulating, in vitro, the native behavior of human tumors. Still, numerous challenges need to be addressed before we can have platforms with a predictive power appropriate for the pharmaceutical industry. Some of the key needs include the incorporation of the vascular compartment, immune system components, and mechanical signals that regulate tumor development and function. PMID:25662589

  11. Annotated bibliography of human factors applications literature

    Energy Technology Data Exchange (ETDEWEB)

    McCafferty, D.B.

    1984-09-30

    This bibliography was prepared as part of the Human Factors Technology Project, FY 1984, sponsored by the Office of Nuclear Safety, US Department of Energy. The project was conducted by Lawrence Livermore National Laboratory, with Essex Corporation as a subcontractor. The material presented here is a revision and expansion of the bibliographic material developed in FY 1982 as part of a previous Human Factors Technology Project. The previous bibliography was published September 30, 1982, as Attachment 1 to the FY 1982 Project Status Report.

  12. Human Factors and Habitability Challenges for Mars Missions

    Science.gov (United States)

    Whitmore, Mihriban

    2015-01-01

    As NASA is planning to send humans deeper into space than ever before, adequate crew health and performance will be critical for mission success. Within the NASA Human Research Program (HRP), the Space Human Factors and Habitability (SHFH) team is responsible for characterizing the risks associated with human capabilities and limitations with respect to long-duration spaceflight, and for providing mitigations (e.g., guidelines, technologies, and tools) to promote safe, reliable and productive missions. SHFH research includes three domains: Advanced Environmental Health (AEH), Advanced Food Technology (AFT), and Space Human Factors Engineering (SHFE). The AEH portfolio focuses on understanding the risk of microbial contamination of the spacecraft and on the development of standards for exposure to potential toxins such as chemicals, bacteria, fungus, and lunar/Martian dust. The two risks that the environmental health project focuses on are adverse health effects due to changes in host-microbe interactions, and risks associated with exposure to dust in planetary surface habitats. This portfolio also proposes countermeasures to these risks by making recommendations that relate to requirements for environmental quality, foods, and crew health on spacecraft and space missions. The AFT portfolio focuses on reducing the mass, volume, and waste of the entire integrated food system to be used in exploration missions, and investigating processing methods to extend the shelf life of food items up to five years, while assuring that exploration crews will have nutritious and palatable foods. The portfolio also delivers improvements in both the food itself and the technologies for storing and preparing it. SHFE sponsors research to establish human factors and habitability standards and guidelines in five risk areas, and provides improved design concepts for advanced crew interfaces and habitability systems. These risk areas include: Incompatible vehicle/habitat design

  13. First International Workshop on Human Factors in Modeling (HuFaMo 2015)

    DEFF Research Database (Denmark)

    Störrle, Harald; Chaudron, Michel R. V.; Amaral, Vasco

    2015-01-01

    and systematic approaches to assert usability in modeling and confirm the claims of productivity. This workshop creates a space for discussion being a get together of both MDE, Usability, Human Interfaces and the Experimental Software engineering community. HuFaMo expressly focuses on human factors, in order...

  14. Human genetic factors in tuberculosis: an update.

    Science.gov (United States)

    van Tong, Hoang; Velavan, Thirumalaisamy P; Thye, Thorsten; Meyer, Christian G

    2017-09-01

    Tuberculosis (TB) is a major threat to human health, especially in many developing countries. Human genetic variability has been recognised to be of great relevance in host responses to Mycobacterium tuberculosis infection and in regulating both the establishment and the progression of the disease. An increasing number of candidate gene and genome-wide association studies (GWAS) have focused on human genetic factors contributing to susceptibility or resistance to TB. To update previous reviews on human genetic factors in TB we searched the MEDLINE database and PubMed for articles from 1 January 2014 through 31 March 2017 and reviewed the role of human genetic variability in TB. Search terms applied in various combinations were 'tuberculosis', 'human genetics', 'candidate gene studies', 'genome-wide association studies' and 'Mycobacterium tuberculosis'. Articles in English retrieved and relevant references cited in these articles were reviewed. Abstracts and reports from meetings were also included. This review provides a recent summary of associations of polymorphisms of human genes with susceptibility/resistance to TB. © 2017 John Wiley & Sons Ltd.

  15. Runway Incursion: Human Factors In Runway Incursions

    Science.gov (United States)

    2007-11-02

    R. S., & Harbeson, M. M. (1981). Effects of Extended Practice on Dual-Task Tracking Performance. Human Factors, 23(5), 627- 631. David , H. (1997...investigated, and test results obtained from the installation at Long Beach airport. Edwards, V., Daskalakis, A. C., Oswald, L. J., Brading , J

  16. Mechanical stimulation improves tissue-engineered human skeletal muscle

    Science.gov (United States)

    Powell, Courtney A.; Smiley, Beth L.; Mills, John; Vandenburgh, Herman H.

    2002-01-01

    Human bioartificial muscles (HBAMs) are tissue engineered by suspending muscle cells in collagen/MATRIGEL, casting in a silicone mold containing end attachment sites, and allowing the cells to differentiate for 8 to 16 days. The resulting HBAMs are representative of skeletal muscle in that they contain parallel arrays of postmitotic myofibers; however, they differ in many other morphological characteristics. To engineer improved HBAMs, i.e., more in vivo-like, we developed Mechanical Cell Stimulator (MCS) hardware to apply in vivo-like forces directly to the engineered tissue. A sensitive force transducer attached to the HBAM measured real-time, internally generated, as well as externally applied, forces. The muscle cells generated increasing internal forces during formation which were inhibitable with a cytoskeleton depolymerizer. Repetitive stretch/relaxation for 8 days increased the HBAM elasticity two- to threefold, mean myofiber diameter 12%, and myofiber area percent 40%. This system allows engineering of improved skeletal muscle analogs as well as a nondestructive method to determine passive force and viscoelastic properties of the resulting tissue.

  17. Mechanical stimulation improves tissue-engineered human skeletal muscle

    Science.gov (United States)

    Powell, Courtney A.; Smiley, Beth L.; Mills, John; Vandenburgh, Herman H.

    2002-01-01

    Human bioartificial muscles (HBAMs) are tissue engineered by suspending muscle cells in collagen/MATRIGEL, casting in a silicone mold containing end attachment sites, and allowing the cells to differentiate for 8 to 16 days. The resulting HBAMs are representative of skeletal muscle in that they contain parallel arrays of postmitotic myofibers; however, they differ in many other morphological characteristics. To engineer improved HBAMs, i.e., more in vivo-like, we developed Mechanical Cell Stimulator (MCS) hardware to apply in vivo-like forces directly to the engineered tissue. A sensitive force transducer attached to the HBAM measured real-time, internally generated, as well as externally applied, forces. The muscle cells generated increasing internal forces during formation which were inhibitable with a cytoskeleton depolymerizer. Repetitive stretch/relaxation for 8 days increased the HBAM elasticity two- to threefold, mean myofiber diameter 12%, and myofiber area percent 40%. This system allows engineering of improved skeletal muscle analogs as well as a nondestructive method to determine passive force and viscoelastic properties of the resulting tissue.

  18. Engineering melanoma progression in a humanized environment in vivo.

    Science.gov (United States)

    Kiowski, Gregor; Biedermann, Thomas; Widmer, Daniel S; Civenni, Gianluca; Burger, Charlotte; Dummer, Reinhard; Sommer, Lukas; Reichmann, Ernst

    2012-01-01

    To overcome the lack of effective therapeutics for aggressive melanoma, new research models closely resembling the human disease are required. Here we report the development of a fully orthotopic, humanized in vivo model for melanoma, faithfully recapitulating human disease initiation and progression. To this end, human melanoma cells were seeded into engineered human dermo-epidermal skin substitutes. Transplantation onto the back of immunocompromised rats consistently resulted in the development of melanoma, displaying the hallmarks of their parental tumors. Importantly, all initial steps of disease progression were recapitulated, including the incorporation of the tumor cells into their physiological microenvironment, transition of radial to vertical growth, and establishment of highly vascularized, aggressive tumors with dermal involvement. Because all cellular components can be individually accessed using this approach, it allows manipulation of the tumor cells, as well as of the keratinocyte and stromal cell populations. Therefore, in one defined model system, tumor cell-autonomous and non-autonomous pathways regulating human disease progression can be investigated in a humanized, clinically relevant context.

  19. Emission factors for gaseous and particulate pollutants from offshore diesel engine vessels in China

    Science.gov (United States)

    Zhang, Fan; Chen, Yingjun; Tian, Chongguo; Lou, Diming; Li, Jun; Zhang, Gan; Matthias, Volker

    2016-05-01

    Shipping emissions have significant influence on atmospheric environment as well as human health, especially in coastal areas and the harbour districts. However, the contribution of shipping emissions on the environment in China still need to be clarified especially based on measurement data, with the large number ownership of vessels and the rapid developments of ports, international trade and shipbuilding industry. Pollutants in the gaseous phase (carbon monoxide, sulfur dioxide, nitrogen oxides, total volatile organic compounds) and particle phase (particulate matter, organic carbon, elemental carbon, sulfates, nitrate, ammonia, metals) in the exhaust from three different diesel-engine-powered offshore vessels in China (350, 600 and 1600 kW) were measured in this study. Concentrations, fuel-based and power-based emission factors for various operating modes as well as the impact of engine speed on emissions were determined. Observed concentrations and emission factors for carbon monoxide, nitrogen oxides, total volatile organic compounds, and particulate matter were higher for the low-engine-power vessel (HH) than for the two higher-engine-power vessels (XYH and DFH); for instance, HH had NOx EF (emission factor) of 25.8 g kWh-1 compared to 7.14 and 6.97 g kWh-1 of DFH, and XYH, and PM EF of 2.09 g kWh-1 compared to 0.14 and 0.04 g kWh-1 of DFH, and XYH. Average emission factors for all pollutants except sulfur dioxide in the low-engine-power engineering vessel (HH) were significantly higher than that of the previous studies (such as 30.2 g kg-1 fuel of CO EF compared to 2.17 to 19.5 g kg-1 fuel in previous studies, 115 g kg-1 fuel of NOx EF compared to 22.3 to 87 g kg-1 fuel in previous studies and 9.40 g kg-1 fuel of PM EF compared to 1.2 to 7.6 g kg-1 fuel in previous studies), while for the two higher-engine-power vessels (DFH and XYH), most of the average emission factors for pollutants were comparable to the results of the previous studies, engine type was

  20. Maturing human pluripotent stem cell-derived cardiomyocytes in human engineered cardiac tissues.

    Science.gov (United States)

    Feric, Nicole T; Radisic, Milica

    2016-01-15

    Engineering functional human cardiac tissue that mimics the native adult morphological and functional phenotype has been a long held objective. In the last 5 years, the field of cardiac tissue engineering has transitioned from cardiac tissues derived from various animal species to the production of the first generation of human engineered cardiac tissues (hECTs), due to recent advances in human stem cell biology. Despite this progress, the hECTs generated to date remain immature relative to the native adult myocardium. In this review, we focus on the maturation challenge in the context of hECTs, the present state of the art, and future perspectives in terms of regenerative medicine, drug discovery, preclinical safety testing and pathophysiological studies. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. Tissue-engineered human bioartificial muscles expressing a foreign recombinant protein for gene therapy

    Science.gov (United States)

    Powell, C.; Shansky, J.; Del Tatto, M.; Forman, D. E.; Hennessey, J.; Sullivan, K.; Zielinski, B. A.; Vandenburgh, H. H.

    1999-01-01

    Murine skeletal muscle cells transduced with foreign genes and tissue engineered in vitro into bioartificial muscles (BAMs) are capable of long-term delivery of soluble growth factors when implanted into syngeneic mice (Vandenburgh et al., 1996b). With the goal of developing a therapeutic cell-based protein delivery system for humans, similar genetic tissue-engineering techniques were designed for human skeletal muscle stem cells. Stem cell myoblasts were isolated, cloned, and expanded in vitro from biopsied healthy adult (mean age, 42 +/- 2 years), and elderly congestive heart failure patient (mean age, 76 +/- 1 years) skeletal muscle. Total cell yield varied widely between biopsies (50 to 672 per 100 mg of tissue, N = 10), but was not significantly different between the two patient groups. Percent myoblasts per biopsy (73 +/- 6%), number of myoblast doublings prior to senescence in vitro (37 +/- 2), and myoblast doubling time (27 +/- 1 hr) were also not significantly different between the two patient groups. Fusion kinetics of the myoblasts were similar for the two groups after 20-22 doublings (74 +/- 2% myoblast fusion) when the biopsy samples had been expanded to 1 to 2 billion muscle cells, a number acceptable for human gene therapy use. The myoblasts from the two groups could be equally transduced ex vivo with replication-deficient retroviral expression vectors to secrete 0.5 to 2 microg of a foreign protein (recombinant human growth hormone, rhGH)/10(6) cells/day, and tissue engineered into human BAMs containing parallel arrays of differentiated, postmitotic myofibers. This work suggests that autologous human skeletal myoblasts from a potential patient population can be isolated, genetically modified to secrete foreign proteins, and tissue engineered into implantable living protein secretory devices for therapeutic use.

  2. Tissue-engineered human bioartificial muscles expressing a foreign recombinant protein for gene therapy

    Science.gov (United States)

    Powell, C.; Shansky, J.; Del Tatto, M.; Forman, D. E.; Hennessey, J.; Sullivan, K.; Zielinski, B. A.; Vandenburgh, H. H.

    1999-01-01

    Murine skeletal muscle cells transduced with foreign genes and tissue engineered in vitro into bioartificial muscles (BAMs) are capable of long-term delivery of soluble growth factors when implanted into syngeneic mice (Vandenburgh et al., 1996b). With the goal of developing a therapeutic cell-based protein delivery system for humans, similar genetic tissue-engineering techniques were designed for human skeletal muscle stem cells. Stem cell myoblasts were isolated, cloned, and expanded in vitro from biopsied healthy adult (mean age, 42 +/- 2 years), and elderly congestive heart failure patient (mean age, 76 +/- 1 years) skeletal muscle. Total cell yield varied widely between biopsies (50 to 672 per 100 mg of tissue, N = 10), but was not significantly different between the two patient groups. Percent myoblasts per biopsy (73 +/- 6%), number of myoblast doublings prior to senescence in vitro (37 +/- 2), and myoblast doubling time (27 +/- 1 hr) were also not significantly different between the two patient groups. Fusion kinetics of the myoblasts were similar for the two groups after 20-22 doublings (74 +/- 2% myoblast fusion) when the biopsy samples had been expanded to 1 to 2 billion muscle cells, a number acceptable for human gene therapy use. The myoblasts from the two groups could be equally transduced ex vivo with replication-deficient retroviral expression vectors to secrete 0.5 to 2 microg of a foreign protein (recombinant human growth hormone, rhGH)/10(6) cells/day, and tissue engineered into human BAMs containing parallel arrays of differentiated, postmitotic myofibers. This work suggests that autologous human skeletal myoblasts from a potential patient population can be isolated, genetically modified to secrete foreign proteins, and tissue engineered into implantable living protein secretory devices for therapeutic use.

  3. `Human nature': Chemical engineering students' ideas about human relationships with the natural world

    Science.gov (United States)

    Goldman, Daphne; Ben-Zvi Assaraf, Orit; Shemesh, Julia

    2014-05-01

    While importance of environmental ethics, as a component of sustainable development, in preparing engineers is widely acknowledged, little research has addressed chemical engineers' environmental concerns. This study aimed to address this void by exploring chemical engineering students' values regarding human-nature relationships. The study was conducted with 247 3rd-4th year chemical engineering students in Israeli Universities. It employed the New Ecological Paradigm (NEP)-questionnaire to which students added written explanations. Quantitative analysis of NEP-scale results shows that the students demonstrated moderately ecocentric orientation. Explanations to the NEP-items reveal diverse, ambivalent ideas regarding the notions embodied in the NEP, strong scientific orientation and reliance on technology for addressing environmental challenges. Endorsing sustainability implies that today's engineers be equipped with an ecological perspective. The capacity of Higher Education to enable engineers to develop dispositions about human-nature interrelationships requires adaptation of curricula towards multidisciplinary, integrative learning addressing social-political-economic-ethical perspectives, and implementing critical-thinking within the socio-scientific issues pedagogical approach.

  4. The development of human factors technologies -The development of human factors experimental evaluation techniques-

    Energy Technology Data Exchange (ETDEWEB)

    Shim, Bong Sik; Oh, In Suk; Cha, Kyung Hoh; Lee, Hyun Chul [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-07-01

    In this year, we studied the followings: (1) Development of operator mental workload evaluation techniques, (2) Development of a prototype for preliminary human factors experiment, (3) Suitability test of information display on a large scale display panel, (4) Development of guidelines for VDU-based control room design, (5) Development of integrated test facility (ITF). (6) Establishment of an eye tracking system, and we got the following results: (1) Mental workload evaluation techniques for MMI evaluation, (2) PROTOPEX (PROTOtype for preliminary human factors experiment) for preliminary human factors experiments, (3) Usage methods of APTEA (Analysis-Prototyping-Training-Experiment-Analysis) experiment design, (4) Design guidelines for human factors verification, (5) Detail design requirements and development plan of ITF, (6) Eye movement measurement system. 38 figs, 20 tabs, 54 refs. (Author).

  5. MARINE ACCIDENTS RESEARCHED THROUGH HUMAN FACTOR PRISMA

    Directory of Open Access Journals (Sweden)

    Branislav M Ćorović

    2013-07-01

    Full Text Available We are aware of a large number of marine accidents that result in numerous casualties and even deaths and substantial negative environmental effects. The objective of this paper is to indicate factors that contribute to human errors which is identified as the most frequent cause to marine accidents. Despite rapid technological development and safety legislation, this paper identifies the human factor as the waekest link in maritime safety system. This analysis could lead to decrease of vessel accidents. In addition, starting from the European Maritime Safety Agency data and by linear regression model application, we have obtained the trend of number of ships involved in marine accidents as well as the trend of lives lost in marine accidents  in and around European Union waters.

  6. Human factors in aircraft maintenance and inspection

    Science.gov (United States)

    Shepherd, William T.

    1992-01-01

    The events which have led to the intensive study of aircraft structural problems have contributed in no less measure to the study of human factors which influence aircraft maintenance and inspection. Initial research emphasis on aging aircraft maintenance and inspection has since broadened to include all aircraft types. Technicians must be equally adept at repairing old and new aircraft. Their skills must include the ability to repair sheet metal and composite materials; control cable and fly-by-wire systems; round dials and glass cockpits. Their work performance is heavily influenced by others such as designers, technical writers, job card authors, schedulers, and trainers. This paper describes the activities concerning aircraft and maintenance human factors.

  7. Human factors evaluation of teletherapy: Human-system interfaces and procedures. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    Kaye, R.D.; Henriksen, K.; Jones, R. [Hughes Training, Inc., Falls Church, VA (United States); Morisseau, D.S.; Serig, D.I. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Systems Technology

    1995-07-01

    A series of human factors evaluations was undertaken to better understand the contributing factors to human error in the teletherapy environment. Teletherapy is a multidisciplinary methodology for treating cancerous tissue through selective exposure to an external beam of ionizing radiation. The principal sources of radiation are a radioactive isotope, typically cobalt60 (Co-60), or a linear accelerator device capable of producing very high energy x-ray and electron beams. A team of human factors specialists conducted site visits to radiation oncology departments at community hospitals, university centers, and free-standing clinics. In addition, a panel of radiation oncologists, medical physicists, and radiation technologists served as subject matter experts. A function and task analysis was initially performed to guide subsequent evaluations in the areas of user-system interfaces, procedures, training and qualifications, and organizational policies and practices. The present report focuses on an evaluation of the human-system interfaces in relation to the treatment machines and supporting equipment (e.g., simulators, treatment planning computers, control consoles, patient charts) found in the teletherapy environment. The report also evaluates operating, maintenance and emergency procedures and practices involved in teletherapy. The evaluations are based on the function and task analysis and established human engineering guidelines, where applicable.

  8. Design Considerations for Human Rating of Liquid Rocket Engines

    Science.gov (United States)

    Parkinson, Douglas

    2010-01-01

    I.Human-rating is specific to each engine; a. Context of program/project must be understood. b. Engine cannot be discussed independently from vehicle and mission. II. Utilize a logical combination of design, manufacturing, and test approaches a. Design 1) It is crucial to know the potential ways a system can fail, and how a failure can propagate; 2) Fault avoidance, fault tolerance, DFMR, caution and warning all have roles to play. b. Manufacturing and Assembly; 1) As-built vs. as-designed; 2) Review procedures for assembly and maintenance periodically; and 3) Keep personnel trained and certified. c. There is no substitute for test: 1) Analytical tools are constantly advancing, but still need test data for anchoring assumptions; 2) Demonstrate robustness and explore sensitivities; 3) Ideally, flight will be encompassed by ground test experience. III. Consistency and repeatability is key in production a. Maintain robust processes and procedures for inspection and quality control based upon development and qualification experience; b. Establish methods to "spot check" quality and consistency in parts: 1) Dedicated ground test engines; 2) Random components pulled from the line/lot to go through "enhanced" testing.

  9. Human resources in science and engineering: Policy implications

    Energy Technology Data Exchange (ETDEWEB)

    Leggon, C.B.

    1995-12-31

    Recently, there has been much debate concerning the adequacy of the United States` (U.S.) human resources base to meet its future needs for science and engineering (S/E) talent. Science policy analysts - and scientists and engineers themselves - disagree about whether there will be any shortages of scientists and engineers, and if so, what they will mean for the U.S. Whether or not these shortages materialize, it is necessary for the U.S. to expand the pool from which it recruits its S/E talent. This paper addresses the question of how to increases the diversity of the S/E talent pool to include those who are projected by the year 2000 to be the majority of entry-level workers in the U.S. workforce: women and racial/ethnic minorities. Market forces alone cannot increase the size and diversity of the U.S. S/E workforce. Policy intervention will continue to be required to increase the diversity of the S/E workforce.

  10. A Human Factors Perspective on Alarm System Research and Development 2000 to 2010

    Energy Technology Data Exchange (ETDEWEB)

    Curt Braun; John Grimes; Eric Shaver; Ronald Boring (Principal Investigator)

    2011-09-01

    By definition, alarms serve to notify human operators of out-of-parameter conditions that could threaten equipment, the environment, product quality and, of course, human life. Given the complexities of industrial systems, human machine interfaces, and the human operator, the understanding of how alarms and humans can best work together to prevent disaster is continually developing. This review examines advances in alarm research and development from 2000 to 2010 and includes the writings of trade professionals, engineering and human factors researchers, and standards organizations with the goal of documenting advances in alarms system design, research, and implementation.

  11. Canadian Ranger Rifle: Human Factors Requirements Validation

    Science.gov (United States)

    2010-08-01

    nation building through programs such as the Junior Canadian Rangers ( JCR )6. Other tasks of the CR include providing local expertise, guidance, and...Requirements FN Fabrique Nationale HF Human Factors HSI Humansystems® Incorporated JCR Junior Canadian Rangers MOTS Military off the Shelf NATO...support the Junior Canadian Rangers ( JCR ) Program, which helps to achieve national and territorial goals through nation building. DEFICIENCY

  12. HSE management excellence: a Human Factors approach

    Directory of Open Access Journals (Sweden)

    Roberto Theobald

    2007-04-01

    Full Text Available Present work discusses the integration of Human Factors in Health, Safety and Enviroment(HSE Management System allowing it as a way of checking the progress obtained, therebyminimizing the efforts and maximizing the result. A bibliographical research was carried outon the theoretical elements of the theme. As a result of this work, a proposal “conceptualstructure” for the integration of “Humais Factors” with the HSE management system ofAssociation of Oil & Gas Produces was presented.

  13. Human factors by descent energy management

    Science.gov (United States)

    Curry, R. E.

    1979-01-01

    This paper describes some of the results of a human factors study of energy management during descent using standard aircraft displays. Discussions with pilots highlighted the practical constraints involved and the techniques (algorithms) used to accomplish the descent. The advantages and disadvantages of these algorithms are examined with respect to workload and their sensitivity to disturbances. Vertical navigation and flight performance computers are discussed in terms of the information needed for effective pilot monitoring and takeover

  14. Addressing Human Factors Gaps in Cyber Defense

    Science.gov (United States)

    2016-09-23

    network attack graphs. Paper presented at the IEEE Workshop on Visualization for Computer Security , Minneapolis, MN. Roberts, J.C. (2007). State of...Cyber security is a high-ranking national priority that is only likely to grow as we become more dependent on cyber systems. From a research perspective...Cyber security , cyber operations, human factors 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT: SAR 18. NUMBER OF PAGES 5 19a

  15. Human factors for a sustainable future.

    Science.gov (United States)

    Thatcher, Andrew; Yeow, Paul H P

    2016-11-01

    Current human activities are seriously eroding the ability of natural and social systems to cope. Clearly we cannot continue along our current path without seriously damaging our own ability to survive as a species. This problem is usually framed as one of sustainability. As concerned professionals, citizens, and humans there is a strong collective will to address what we see as a failure to protect the natural and social environments that supports us. While acknowledging that we cannot do this alone, human factors and ergonomics needs to apply its relevant skills and knowledge to assist where it can in addressing the commonly identified problem areas. These problems include pollution, climate change, renewable energy, land transformation, and social unrest amongst numerous other emerging global problems. The issue of sustainability raises two fundamental questions for human factors and ergonomics: which system requires sustaining and what length of time is considered sustainable? In this paper we apply Wilson (2014) parent-sibling-child model to understanding what is required of an HFE sustainability response. This model is used to frame the papers that appear in this Special Issue.

  16. Space Station crew safety - Human factors model

    Science.gov (United States)

    Cohen, M. M.; Junge, M. K.

    1984-01-01

    A model of the various human factors issues and interactions that might affect crew safety is developed. The first step addressed systematically the central question: How is this Space Station different from all other spacecraft? A wide range of possible issue was identified and researched. Five major topics of human factors issues that interacted with crew safety resulted: Protocols, Critical Habitability, Work Related Issues, Crew Incapacitation and Personal Choice. Second, an interaction model was developed that would show some degree of cause and effect between objective environmental or operational conditions and the creation of potential safety hazards. The intermediary steps between these two extremes of causality were the effects on human performance and the results of degraded performance. The model contains three milestones: stressor, human performance (degraded) and safety hazard threshold. Between these milestones are two countermeasure intervention points. The first opportunity for intervention is the countermeasure against stress. If this countermeasure fails, performance degrades. The second opportunity for intervention is the countermeasure against error. If this second countermeasure fails, the threshold of a potential safety hazard may be crossed.

  17. Human epidermal growth factor and the proliferation of human fibroblasts.

    Science.gov (United States)

    Carpenter, G; Cohen, S

    1976-06-01

    The effect of human epidermal growth factor (hEGF), a 5,400 molecular weight polypeptide isolated from human urine, on the growth of human foreskin fibroblasts (HF cells) was studied by measuring cell numbers and the incorporation of labeled thymidine. The addition of hEGF to HF cells growing in a medium containing 10% calf serum resulted in a 4-fold increase in the final density. The presence of hEGF also promoted the growth of HF cells in media containing either 1% calf serum or 10% gamma globulin-free serum. The addition of hEGF to quiescent confluent monolayers of HF cells, maintained in a medium with 1% calf serum for 48 hours, resulted in a 10- to 20-fold increase in the amount of 3H-thymidine incorporation after 20-24 hours. The stimulation of thymidine incorporation was maximal at an hEGF concentration of 2 ng/ml, was dependent on the presence of serum, and was enhanced by the addition of ascorbic acid. In confluent cultures of HF cells, subject to density dependent inhibition of growth, hEGF was able to stimulate DNA synthesis more effectively than fresh calf serum. Human EGF stimulated DNA synthesis in quiescent cultures, however, regardless of cell density. The addition of rabbit anti-hEGF inhibited all effects of this growth factor on HF cells.

  18. Human Kunitz-type protease inhibitor engineered for enhanced matrix retention extends longevity of fibrin biomaterials.

    Science.gov (United States)

    Briquez, Priscilla S; Lorentz, Kristen M; Larsson, Hans M; Frey, Peter; Hubbell, Jeffrey A

    2017-08-01

    Aprotinin is a broad-spectrum serine protease inhibitor used in the clinic as an anti-fibrinolytic agent in fibrin-based tissue sealants. However, upon re-exposure, some patients suffer from hypersensitivity immune reactions likely related to the bovine origin of aprotinin. Here, we aimed to develop a human-derived substitute to aprotinin. Based on sequence homology analyses, we identified the Kunitz-type protease inhibitor (KPI) domain of human amyloid-β A4 precursor protein as being a potential candidate. While KPI has a lower intrinsic anti-fibrinolytic activity than aprotinin, we reasoned that its efficacy is additionally limited by its fast release from fibrin material, just as aprotinin's is. Thus, we engineered KPI variants for controlled retention in fibrin biomaterials, using either covalent binding through incorporation of a substrate for the coagulation transglutaminase Factor XIIIa or through engineering of extracellular matrix protein super-affinity domains for sequestration into fibrin. We showed that both engineered KPI variants significantly slowed plasmin-mediated fibrinolysis in vitro, outperforming aprotinin. In vivo, our best engineered KPI variant (incorporating the transglutaminase substrate) extended fibrin matrix longevity by 50%, at a dose at which aprotinin did not show efficacy, thus qualifying it as a competitive substitute of aprotinin in fibrin sealants. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  19. ENGINES: exploring single nucleotide variation in entire human genomes

    Directory of Open Access Journals (Sweden)

    Salas Antonio

    2011-04-01

    Full Text Available Abstract Background Next generation ultra-sequencing technologies are starting to produce extensive quantities of data from entire human genome or exome sequences, and therefore new software is needed to present and analyse this vast amount of information. The 1000 Genomes project has recently released raw data for 629 complete genomes representing several human populations through their Phase I interim analysis and, although there are certain public tools available that allow exploration of these genomes, to date there is no tool that permits comprehensive population analysis of the variation catalogued by such data. Description We have developed a genetic variant site explorer able to retrieve data for Single Nucleotide Variation (SNVs, population by population, from entire genomes without compromising future scalability and agility. ENGINES (ENtire Genome INterface for Exploring SNVs uses data from the 1000 Genomes Phase I to demonstrate its capacity to handle large amounts of genetic variation (>7.3 billion genotypes and 28 million SNVs, as well as deriving summary statistics of interest for medical and population genetics applications. The whole dataset is pre-processed and summarized into a data mart accessible through a web interface. The query system allows the combination and comparison of each available population sample, while searching by rs-number list, chromosome region, or genes of interest. Frequency and FST filters are available to further refine queries, while results can be visually compared with other large-scale Single Nucleotide Polymorphism (SNP repositories such as HapMap or Perlegen. Conclusions ENGINES is capable of accessing large-scale variation data repositories in a fast and comprehensive manner. It allows quick browsing of whole genome variation, while providing statistical information for each variant site such as allele frequency, heterozygosity or FST values for genetic differentiation. Access to the data mart

  20. The Humanistic Side of Engineering: Considering Social Science and Humanities Dimensions of Engineering in Education and Research

    Science.gov (United States)

    Hynes, Morgan; Swenson, Jessica

    2013-01-01

    Mathematics and science knowledge/skills are most commonly associated with engineering's pre-requisite knowledge. Our goals in this paper are to argue for a more systematic inclusion of social science and humanities knowledge in the introduction of engineering to K-12 students. As part of this argument, we present a construct for framing the…

  1. Activated human neutrophils release hepatocyte growth factor/scatter factor.

    LENUS (Irish Health Repository)

    McCourt, M

    2012-02-03

    BACKGROUND: Hepatocyte growth factor or scatter factor (HGF\\/SF) is a pleiotropic cytokine that has potent angiogenic properties. We have previously demonstrated that neutrophils (PMN) are directly angiogenic by releasing vascular endothelial growth factor (VEGF). We hypothesized that the acute inflammatory response can stimulate PMN to release HGF. AIMS: To examine the effects of inflammatory mediators on PMN HGF release and the effect of recombinant human HGF (rhHGF) on PMN adhesion receptor expression and PMN VEGF release. METHODS: In the first experiment, PMN were isolated from healthy volunteers and stimulated with tumour necrosis factor-alpha (TNF-alpha), lipopolysaccharide (LPS), interleukin-8 (IL-8), and formyl methionyl-leucyl-phenylalanine (fMLP). Culture supernatants were assayed for HGF using ELISA. In the second experiment, PMN were lysed to measure total HGF release and HGF expression in the PMN was detected by Western immunoblotting. Finally, PMN were stimulated with rhHGF. PMN CD 11a, CD 11b, and CD 18 receptor expression and VEGF release was measured using flow cytometry and ELISA respectively. RESULTS: TNF-alpha, LPS and fMLP stimulation resulted in significantly increased release of PMN HGF (755+\\/-216, 484+\\/-221 and 565+\\/-278 pg\\/ml, respectively) compared to controls (118+\\/-42 pg\\/ml). IL-8 had no effect. Total HGF release following cell lysis and Western blot suggests that HGF is released from intracellular stores. Recombinant human HGF did not alter PMN adhesion receptor expression and had no effect on PMN VEGF release. CONCLUSIONS: This study demonstrates that pro-inflammatory mediators can stimulate HGF release from a PMN intracellular store and that activated PMN in addition to secreting VEGF have further angiogenic potential by releasing HGF.

  2. Human reliability, error, and human factors in power generation

    CERN Document Server

    Dhillon, B S

    2014-01-01

    Human reliability, error, and human factors in the area of power generation have been receiving increasing attention in recent years. Each year billions of dollars are spent in the area of power generation to design, construct/manufacture, operate, and maintain various types of power systems around the globe, and such systems often fail due to human error. This book compiles various recent results and data into one volume, and eliminates the need to consult many diverse sources to obtain vital information.  It enables potential readers to delve deeper into a specific area, providing the source of most of the material presented in references at the end of each chapter. Examples along with solutions are also provided at appropriate places, and there are numerous problems for testing the reader’s comprehension.  Chapters cover a broad range of topics, including general methods for performing human reliability and error analysis in power plants, specific human reliability analysis methods for nuclear power pl...

  3. A nanoparticulate injectable hydrogel as a tissue engineering scaffold for multiple growth factor delivery for bone regeneration

    Directory of Open Access Journals (Sweden)

    Dyondi D

    2012-12-01

    Full Text Available Deepti Dyondi,1 Thomas J Webster,2 Rinti Banerjee11Department of Biosciences and Bioengineering, Indian Institute of Technology Bombay, Mumbai, Maharashtra, India; 2Nanomedicine Laboratories, Division of Engineering and Department of Orthopedics, Brown University, Providence, RI, USAAbstract: Gellan xanthan gels have been shown to be excellent carriers for growth factors and as matrices for several tissue engineering applications. Gellan xanthan gels along with chitosan nanoparticles of 297 ± 61 nm diameter, basic fibroblast growth factor (bFGF, and bone morphogenetic protein 7 (BMP7 were employed in a dual growth factor delivery system to promote the differentiation of human fetal osteoblasts. An injectable system with ionic and temperature gelation was optimized and characterized. The nanoparticle loaded gels showed significantly improved cell proliferation and differentiation due to the sustained release of growth factors. A differentiation marker study was conducted, analyzed, and compared to understand the effect of single vs dual growth factors and free vs encapsulated growth factors. Dual growth factor loaded gels showed a higher alkaline phosphatase and calcium deposition compared to single growth factor loaded gels. The results suggest that encapsulation and stabilization of growth factors within nanoparticles and gels are promising for bone regeneration. Gellan xanthan gels also showed antibacterial effects against Pseudomonas aeruginosa, Staphylococcus aureus, and Staphylococcus epidermidis, the common pathogens in implant failure.Keywords: bone tissue engineering, bone morphogenetic protein 7 (BMP7, basic fibroblast growth factor (bFGF, hydrogel, nanoparticles, osteoblasts

  4. Human factors review of CFMS displays for Ulchin Nuclear Power Unit 3 and 4

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Hee; Baek, Seung Min; Kim, Jung Taek; Park, Jae Chang; Lee, Jung Woon; Oh, In Suk; Lee, Joon Whan; Jung, Kwang Tae; Cha, Hye Young [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-11-01

    This report describes the human factors review of CFMS displays for Ulchin 3 and 4 by the following four subjects; At first, by reviewing issues regarding the design process of present CFMS, human factors engineering program plan (HFEPP) and human factors verification and validation plan Were proposed to accomplish the completeness of design word; Secondly, researches and developments were integrated into the review results at the point of suitability of CFMS design concept and basic function; For the third, availability and suitability were assessed according to human factors evaluation criteria on the CFMS display design, and overall effectiveness was also evaluated in parts; For the fourth, recommendations were made to human factors problems in accordance with their importance and an implementation plan was suggested for the resolution of problems. 54 refs., 34 tabs., 42 figs. (author)

  5. Engineering and Humanities Students' Strategies for Vocabulary Acquisition: An Iranian Experience

    Directory of Open Access Journals (Sweden)

    Hassan Soodmand Afshar

    2014-05-01

    Full Text Available The present study set out to investigate the differences between EAP (English for Academic Purposes students of Humanities and Engineering in terms of vocabulary strategy choice and use. One hundred and five undergraduate Iranian students (39 students from Engineering Faculty and 66 from Humanities Faculty studying at Bu-Ali Sina University Hamedan, during the academic year of 2011–2012 participated in this study. For data collection purposes, a pilot-tested factor-analyzed five-point Likert-scale vocabulary learning strategies questionnaire (VLSQ containing 45 statements was adopted. The results of independent samples t-test indicated that, overall, the two groups were not significantly different in the choice and use of vocabulary learning strategies. However, running Chi square analyses, significant differences were found in individual strategy use in 6 out of 45 strategies. That is, while Humanities students used more superficial and straightforward strategies like repetition strategy and seeking help from others, the Engineering students preferred much deeper, thought-provoking and sophisticated strategies like using a monolingual dictionary and learning vocabulary through collocations and coordinates. Further, the most and the least frequently used vocabulary learning strategies by the two groups were specified, out of which only two strategies in each category were commonly shared by both groups. The possible reasons why the results have turned out to be so as well as the implications of the study are discussed in details in the paper.

  6. Architecture of human translation initiation factor 3.

    Science.gov (United States)

    Querol-Audi, Jordi; Sun, Chaomin; Vogan, Jacob M; Smith, M Duane; Gu, Yu; Cate, Jamie H D; Nogales, Eva

    2013-06-04

    Eukaryotic translation initiation factor 3 (eIF3) plays a central role in protein synthesis by organizing the formation of the 43S preinitiation complex. Using genetic tag visualization by electron microscopy, we reveal the molecular organization of ten human eIF3 subunits, including an octameric core. The structure of eIF3 bears a close resemblance to that of the proteasome lid, with a conserved spatial organization of eight core subunits containing PCI and MPN domains that coordinate functional interactions in both complexes. We further show that eIF3 subunits a and c interact with initiation factors eIF1 and eIF1A, which control the stringency of start codon selection. Finally, we find that subunit j, which modulates messenger RNA interactions with the small ribosomal subunit, makes multiple independent interactions with the eIF3 octameric core. These results highlight the conserved architecture of eIF3 and how it scaffolds key factors that control translation initiation in higher eukaryotes, including humans.

  7. Epidermal growth factor (urogastrone) in human tissues.

    Science.gov (United States)

    Hirata, Y; Orth, D N

    1979-04-01

    Human epidermal growth factor (hEGF), which stimulates the growth of a variety of tissues, was first isolated from mouse submandibular glands, but is also excreted in large amounts (about 50 micrograms/day) in human urine and is probably identical to human beta-urogastrone (hUG), a potent inhibitor of stimulated gastric acid secretion. However, the primary tissue source of hEGF/hUG is as yet unknown. The hEGF/hUG in homogenates of human salivary glands and a wide variety of other endocrine and nonendocrine tissues was extracted by Amberlite CG-50 cation exchange chromatography and immune affinity chromatography using the immunoglobulin fraction of rabbit anti-hEGF serum covalently bound to agarose. The extracts were subjected to homologous hEGF RIA. Immunoreactive hEGF was found in extracts of adult submandibular gland, thyroid gland, duodenum, jejunum, and kidney, but not in several fetal tissues. The tissue immunoreactive hEGF was similar to standard hEGF in terms of immunoreactivity and elution from Sephadex G-50 Fine resin, but its concentrations were very low (1.3-5.5 ng/g wet tissue). Thus, it is not certain that these tissues represent the only source of the large amounts of hEGF/hUG that appear to be filtered by the kidneys each day.

  8. Humanism as a common factor in psychotherapy.

    Science.gov (United States)

    Wampold, Bruce E

    2012-12-01

    There are many forms of psychotherapies, each distinctive in its own way. From the origins of psychotherapy, it has been suggested that psychotherapy is effective through factors that are common to all therapies. In this article, I suggest that the commonalities that are at the core of psychotherapy are related to evolved human characteristics, which include (a) making sense of the world, (b) influencing through social means, and (c) connectedness, expectation, and mastery. In this way, all psychotherapies are humanistic. (c) 2012 APA, all rights reserved.

  9. Review of EPRI Nuclear Human Factors Program

    Energy Technology Data Exchange (ETDEWEB)

    Hanes, L.F.; O`Brien, J.F. [Electric Power Research Institute, Palo Alto, CA (United States)

    1996-03-01

    The Electric Power Research Institute (EPRI) Human Factors Program, which is part of the EPRI Nuclear Power Group, was established in 1975. Over the years, the Program has changed emphasis based on the shifting priorities and needs of the commercial nuclear power industry. The Program has produced many important products that provide significant safety and economic benefits for EPRI member utilities. This presentation will provide a brief history of the Program and products. Current projects and products that have been released recently will be mentioned.

  10. Engineer Ethics Education that Treated Safety Problem to Promote Development of General Human Competence and Independent Engineer

    Science.gov (United States)

    Hotta, Genji

    The human race came to expect the engineer‧s international activity by an international extension of the risk. The engineer should provide with “Overall ability” and “Independent ability” to answer the demand of the society. The engineer ethics education is effective to the acquisition of the ability that the society demands. Because the engineer ethics education teaches the engineer to develop “Ethics action as the individual” to “Ethics activity as the enterprise” . In the point of development of the comprehensive capacity, it can be said that the engineer ethics education is training that supports the action power that accomplishes the social responsibility. However, it is easy to make the engineer ethics education a polite fiction. Then, we propose to take the safety problem to the ethics education for the prevention of making to the polite fiction of the education.

  11. Bacterial sigma factors as targets for engineered or synthetic transcriptional control.

    Science.gov (United States)

    Tripathi, Lakshmi; Zhang, Yan; Lin, Zhanglin

    2014-01-01

    Sigma (σ) factors are the predominant constituents of transcription regulation in bacteria. σ Factors recruit the core RNA polymerase to recognize promoters with specific DNA sequences. Recently, engineering of transcriptional regulators has become a significant tool for strain engineering. The present review summarizes the recent advances in σ factor based engineering or synthetic design. The manipulation of σ factors presents insights into the bacterial stress tolerance and metabolite productivity. We envision more synthetic design based on σ factors that can be used to tune the regulatory network of bacteria.

  12. Bacterial sigma factors as targets for engineered or synthetic transcriptional control

    Directory of Open Access Journals (Sweden)

    Lakshmi eTripathi

    2014-09-01

    Full Text Available Sigma (σ factors are the predominant constituents of transcription regulation in bacteria. σ factors recruit the core RNA polymerase (RNAP to recognize promoters with specific DNA sequences. Recently engineering of transcriptional regulators has become a significant tool for strain engineering. The present review summarizes the recent advances in σ factor based engineering or synthetic design. The manipulation of σ factors presents insights into the bacterial stress tolerance and metabolite productivity. We envision more synthetic design based on σ factors that can be used to tune the regulatory network of bacteria.

  13. Growth factor releasing scaffolds for cartilage tissue engineering

    NARCIS (Netherlands)

    Sohier, Jerome

    2006-01-01

    Over the last century, life expectancy has increased at a rapid pace resulting in an increase of articular cartilage disorders. To solve this problem, extensive research is currently performed using tissue engineering approaches. Cartilage tissue engineering aims to reconstruct this tissue both stru

  14. Human factors quantification via boundary identification of flight performance margin

    Directory of Open Access Journals (Sweden)

    Yang Changpeng

    2014-08-01

    Full Text Available A systematic methodology including a computational pilot model and a pattern recognition method is presented to identify the boundary of the flight performance margin for quantifying the human factors. The pilot model is proposed to correlate a set of quantitative human factors which represent the attributes and characteristics of a group of pilots. Three information processing components which are influenced by human factors are modeled: information perception, decision making, and action execution. By treating the human factors as stochastic variables that follow appropriate probability density functions, the effects of human factors on flight performance can be investigated through Monte Carlo (MC simulation. Kernel density estimation algorithm is selected to find and rank the influential human factors. Subsequently, human factors are quantified through identifying the boundary of the flight performance margin by the k-nearest neighbor (k-NN classifier. Simulation-based analysis shows that flight performance can be dramatically improved with the quantitative human factors.

  15. Human Factors Considerations in New Nuclear Power Plants: Detailed Analysis.

    Energy Technology Data Exchange (ETDEWEB)

    OHara,J.; Higgins, J.; Brown, W.; Fink, R.

    2008-02-14

    This Nuclear Regulatory Commission (NRC) sponsored study has identified human-performance issues in new and advanced nuclear power plants. To identify the issues, current industry developments and trends were evaluated in the areas of reactor technology, instrumentation and control technology, human-system integration technology, and human factors engineering (HFE) methods and tools. The issues were organized into seven high-level HFE topic areas: Role of Personnel and Automation, Staffing and Training, Normal Operations Management, Disturbance and Emergency Management, Maintenance and Change Management, Plant Design and Construction, and HFE Methods and Tools. The issues where then prioritized into four categories using a 'Phenomena Identification and Ranking Table' methodology based on evaluations provided by 14 independent subject matter experts. The subject matter experts were knowledgeable in a variety of disciplines. Vendors, utilities, research organizations and regulators all participated. Twenty issues were categorized into the top priority category. This Brookhaven National Laboratory (BNL) technical report provides the detailed methodology, issue analysis, and results. A summary of the results of this study can be found in NUREG/CR-6947. The research performed for this project has identified a large number of human-performance issues for new control stations and new nuclear power plant designs. The information gathered in this project can serve as input to the development of a long-term strategy and plan for addressing human performance in these areas through regulatory research. Addressing human-performance issues will provide the technical basis from which regulatory review guidance can be developed to meet these challenges. The availability of this review guidance will help set clear expectations for how the NRC staff will evaluate new designs, reduce regulatory uncertainty, and provide a well-defined path to new nuclear power plant

  16. Humanism Factors and Islam Viewpoint from Motahri's Point of View

    Science.gov (United States)

    Yousefi, Zargham; Yousefy, Alireza; Keshtiaray, Narges

    2015-01-01

    The aim of this research is to criticize liberal humanism based on Islam viewpoint emphasizing Motahri's point of view. In this paper, the researchers tried to identify liberalism humanism factors with analytical look in order to present a new categorization called "main factor of liberal humanism". Then, each factor was studied and…

  17. Humanism Factors and Islam Viewpoint from Motahri's Point of View

    Science.gov (United States)

    Yousefi, Zargham; Yousefy, Alireza; Keshtiaray, Narges

    2015-01-01

    The aim of this research is to criticize liberal humanism based on Islam viewpoint emphasizing Motahri's point of view. In this paper, the researchers tried to identify liberalism humanism factors with analytical look in order to present a new categorization called "main factor of liberal humanism". Then, each factor was studied and…

  18. Encapsulation of factor IX-engineered mesenchymal stem cells in fibrinogen-alginate microcapsules enhances their viability and transgene secretion.

    Science.gov (United States)

    Sayyar, Bahareh; Dodd, Megan; Wen, Jianping; Ma, Shirley; Marquez-Curtis, Leah; Janowska-Wieczorek, Anna; Hortelano, Gonzalo

    2012-01-01

    Cell microencapsulation holds significant promise as a strategy for cellular therapies; however, inadequate survival and functionality of the enclosed cells limit its application in hemophilia treatment. Here, we evaluated the use of alginate-based microcapsules to enhance the viability and transgene secretion of human cord blood-derived mesenchymal stem cells in three-dimensional cultures. Given the positive effects of extracellular matrix molecules on mesenchymal stem cell growth, we tested whether fibrinogen-supplemented alginate microcapsules can improve the efficiency of encapsulated factor IX-engineered mesenchymal stem cells as a treatment of hemophilia B. We found that fibrinogen-supplemented alginate microcapsules (a) significantly enhanced the viability and proliferation of factor IX-engineered mesenchymal stem cells and (b) increased factor IX secretion by mesenchymal stem cells compared to mesenchymal stem cells in nonsupplemented microcapsules. Moreover, we observed the osteogenic, but not chondrogenic or adipogenic, differentiation capability of factor IX-engineered cord blood mesenchymal stem cells and their efficient factor IX secretion while encapsulated in fibrinogen-supplemented alginate microcapsules. Thus, the use of engineered mesenchymal stem cells encapsulated in fibrinogen-modified microcapsules may have potential application in the treatment of hemophilia or other protein deficiency diseases.

  19. Encapsulation of factor IX–engineered mesenchymal stem cells in fibrinogen–alginate microcapsules enhances their viability and transgene secretion

    Directory of Open Access Journals (Sweden)

    Bahareh Sayyar

    2012-12-01

    Full Text Available Cell microencapsulation holds significant promise as a strategy for cellular therapies; however, inadequate survival and functionality of the enclosed cells limit its application in hemophilia treatment. Here, we evaluated the use of alginate-based microcapsules to enhance the viability and transgene secretion of human cord blood–derived mesenchymal stem cells in three-dimensional cultures. Given the positive effects of extracellular matrix molecules on mesenchymal stem cell growth, we tested whether fibrinogen-supplemented alginate microcapsules can improve the efficiency of encapsulated factor IX–engineered mesenchymal stem cells as a treatment of hemophilia B. We found that fibrinogen-supplemented alginate microcapsules (a significantly enhanced the viability and proliferation of factor IX–engineered mesenchymal stem cells and (b increased factor IX secretion by mesenchymal stem cells compared to mesenchymal stem cells in nonsupplemented microcapsules. Moreover, we observed the osteogenic, but not chondrogenic or adipogenic, differentiation capability of factor IX–engineered cord blood mesenchymal stem cells and their efficient factor IX secretion while encapsulated in fibrinogen-supplemented alginate microcapsules. Thus, the use of engineered mesenchymal stem cells encapsulated in fibrinogen-modified microcapsules may have potential application in the treatment of hemophilia or other protein deficiency diseases.

  20. The influence factors of construction engineering cost and the strategy to reduce engineering cost%建筑工程造价的影响要素及降低工程造价的策略

    Institute of Scientific and Technical Information of China (English)

    陈华荣

    2014-01-01

    This paper introduced in detail the construction engineering cost,and analyzed the human factors,policy factors,market factors,con-struction factors influence of engineering cost,and put forward specific strategies to reduce the engineering cost,to improve the economic benefits of whole engineering.%对建筑工程造价进行了详细的介绍,并对影响工程造价的人为要素、政策要素、市场要素、施工要素进行了分析,进而提出了降低工程造价的具体策略,以提升整个工程的经济效益。

  1. The Insertion of Human Factors Concerns into NextGen Programmatic Decisions

    Science.gov (United States)

    Beard, Bettina L.; Holbrook, Jon Brian; Seely, Rachel

    2013-01-01

    Since the costs of proposed improvements in air traffic management exceed available funding, FAA decision makers must select and prioritize what actually gets implemented. We discuss a set of methods to help forecast operational and human performance issues and benefits before new automation is introduced. This strategy could minimize the impact of politics, assist decision makers in selecting and prioritizing potential improvements, make the process more transparent and strengthen the link between the engineering and human factors domains.

  2. Human Factors Lessons Learned from Flight Testing Wingless Lifting Body Vehicles

    Science.gov (United States)

    Merlin, Peter William

    2014-01-01

    Since the 1960s, NASA, the Air Force, and now private industry have attempted to develop an operational human crewed reusable spacecraft with a wingless, lifting body configuration. This type of vehicle offers increased mission flexibility and greater reentry cross range than capsule type craft, and is particularly attractive due to the capability to land on a runway. That capability, however, adds complexity to the human factors engineering requirements of developing such aircraft.

  3. Efficient derivation and genetic modifications of human pluripotent stem cells on engineered human feeder cell lines.

    Science.gov (United States)

    Zou, Chunlin; Chou, Bin-Kuan; Dowey, Sarah N; Tsang, Kitman; Huang, Xiaosong; Liu, Cyndi F; Smith, Cory; Yen, Jonathan; Mali, Prashant; Zhang, Yu Alex; Cheng, Linzhao; Ye, Zhaohui

    2012-08-10

    Derivation of pluripotent stem cells (iPSCs) induced from somatic cell types and the subsequent genetic modifications of disease-specific or patient-specific iPSCs are crucial steps in their applications for disease modeling as well as future cell and gene therapies. Conventional procedures of these processes require co-culture with primary mouse embryonic fibroblasts (MEFs) to support self-renewal and clonal growth of human iPSCs as well as embryonic stem cells (ESCs). However, the variability of MEF quality affects the efficiencies of all these steps. Furthermore, animal sourced feeders may hinder the clinical applications of human stem cells. In order to overcome these hurdles, we established immortalized human feeder cell lines by stably expressing human telomerase reverse transcriptase, Wnt3a, and drug resistance genes in adult mesenchymal stem cells. Here, we show that these immortalized human feeders support efficient derivation of virus-free, integration-free human iPSCs and long-term expansion of human iPSCs and ESCs. Moreover, the drug-resistance feature of these feeders also supports nonviral gene transfer and expression at a high efficiency, mediated by piggyBac DNA transposition. Importantly, these human feeders exhibit superior ability over MEFs in supporting homologous recombination-mediated gene targeting in human iPSCs, allowing us to efficiently target a transgene into the AAVS1 safe harbor locus in recently derived integration-free iPSCs. Our results have great implications in disease modeling and translational applications of human iPSCs, as these engineered human cell lines provide a more efficient tool for genetic modifications and a safer alternative for supporting self-renewal of human iPSCs and ESCs.

  4. Human Factors in Training - Space Flight Resource Management Training

    Science.gov (United States)

    Bryne, Vicky; Connell, Erin; Barshi, Immanuel; Arsintescu, L.

    2009-01-01

    . Work on SFRM training has been conducted in collaboration with the Expedition Vehicle Division at the Mission Operations Directorate (MOD) and with United Space Alliance (USA) which provides training to Flight Controllers. The space flight resource management training work is part of the Human Factors in Training Directed Research Project (DRP) of the Space Human Factors Engineering (SHFE) Project under the Space Human Factors and Habitability (SHFH) Element of the Human Research Program (HRP). Human factors researchers at the Ames Research Center have been investigating team work and distributed decision making processes to develop a generic SFRM training framework for flight controllers. The work proposed for FY10 continues to build on this strong collaboration with MOD and the USA Training Group as well as previous research in relevant domains such as aviation. In FY10, the work focuses on documenting and analyzing problem solving strategies and decision making processes used in MCC by experienced FCers.

  5. Human factors and ergonomics for primary care.

    Science.gov (United States)

    Bowie, Paul; Jeffcott, Shelly

    2016-03-01

    In the second paper of this series, we provide a brief overview of the scientific discipline of human factors and ergonomics (HFE). Traditionally the HFE focus in healthcare has been in acute hospital settings which are perceived to exhibit characteristics more similar to other high-risk industries already applying related principles and methods. This paper argues that primary care is an area which could benefit extensively from an HFE approach, specifically in improving the performance and well-being of people and organisations. To this end, we define the purpose of HFE, outline its three specialist sub-domains (physical, cognitive and organisational HFE) and provide examples of guiding HFE principles and practices. Additionally, we describe HFE issues of significance to primary care education, improvement and research and outline early plans for building capacity and capability in this setting.

  6. Organizational crisis management: the human factor.

    Science.gov (United States)

    Lewis, Gerald

    2005-01-01

    While many professionals are quite competent when dealing with operational aspects of organizational continuity, often the "human factor" does not receive adequate attention. This article provides a brief overview of a soon to be published book by the same title. It provides a comprehensive understanding of the ubiquitous yet complex reactions of the workforce to a wide array of organizational disruptions. It goes beyond the short term intervention of debriefings to describe the more extensive pre and post incident strategies required to mitigate the impact of crises on the workforce. It is important to remember: "An organization can get its phone lines back up and have its computers backed up...but its workers may still be messed up."

  7. Stability and biological activity evaluations of PEGylated human basic fibroblast growth factor

    OpenAIRE

    Hadadian, Shahin; Shamassebi, Dariush Norouzian; Mirzahoseini, Hasan; Shokrgozar, Mohamad Ali; Bouzari, Saeid; Sepahi, Mina

    2015-01-01

    Background: Human basic fibroblast growth factor (hBFGF) is a heparin-binding growth factor and stimulates the proliferation of a wide variety of cells and tissues causing survival properties and its stability and biological activity improvements have received much attention. Materials and Methods: In the present work, hBFGF produced by engineered Escherichia coli and purified by cation exchange and heparin affinity chromatography, was PEGylated under appropriate condition employing 10 kD pol...

  8. The telerobot workstation testbed for the shuttle aft flight deck: A project plan for integrating human factors into system design

    Science.gov (United States)

    Sauerwein, Timothy

    1989-01-01

    The human factors design process in developing a shuttle orbiter aft flight deck workstation testbed is described. In developing an operator workstation to control various laboratory telerobots, strong elements of human factors engineering and ergonomics are integrated into the design process. The integration of human factors is performed by incorporating user feedback at key stages in the project life-cycle. An operator centered design approach helps insure the system users are working with the system designer in the design and operation of the system. The design methodology is presented along with the results of the design and the solutions regarding human factors design principles.

  9. Integrating Human Factors into Space Vehicle Processing for Risk Management

    Science.gov (United States)

    Woodbury, Sarah; Richards, Kimberly J.

    2008-01-01

    This presentation will discuss the multiple projects performed in United Space Alliance's Human Engineering Modeling and Performance (HEMAP) Lab, improvements that resulted from analysis, and the future applications of the HEMAP Lab for risk assessment by evaluating human/machine interaction and ergonomic designs.

  10. Engineering targeted chromosomal amplifications in human breast epithelial cells.

    Science.gov (United States)

    Springer, Simeon; Yi, Kyung H; Park, Jeenah; Rajpurohit, Anandita; Price, Amanda J; Lauring, Josh

    2015-07-01

    Chromosomal amplifications are among the most common genetic alterations found in human cancers. However, experimental systems to study the processes that lead to specific, recurrent amplification events in human cancers are lacking. Moreover, some common amplifications, such as that at 8p11-12 in breast cancer, harbor multiple driver oncogenes, which are poorly modeled by conventional overexpression approaches. We sought to develop an experimental system to model recurrent chromosomal amplification events in human cell lines. Our strategy is to use homologous-recombination-mediated gene targeting to deliver a dominantly selectable, amplifiable marker to a specified chromosomal location. We used adeno-associated virus vectors to target human MCF-7 breast cancer cells at the ZNF703 locus, in the recurrent 8p11-12 amplicon, using the E. coli inosine monophosphate dehydrogenase (IMPDH) enzyme as a marker. We applied selective pressure using IMPDH inhibitors. Surviving clones were found to have increased copy number of ZNF703 (average 2.5-fold increase) by droplet digital PCR and FISH. Genome-wide array comparative genomic hybridization confirmed that amplifications had occurred on the short arm of chromosome 8, without changes on 8q or other chromosomes. Patterns of amplification were variable and similar to those seen in primary human breast cancers, including "sawtooth" patterns, distal copy number loss, and large continuous regions of copy number gain. This system will allow study of the cis- and trans-acting factors that are permissive for chromosomal amplification and provide a model to analyze oncogene cooperativity in amplifications harboring multiple candidate driver genes.

  11. Identifying the challenging factors in the transition from colleges of engineering to employment

    Science.gov (United States)

    Baytiyeh, Hoda; Naja, Mohamad

    2012-03-01

    The transition from university to a career in engineering is a challenging process. This study examined the perceptions of engineering graduates regarding the difficulties they encountered in their transition from the university to the workplace. Lebanese practising engineers (n=217), living around the world, were surveyed to identify their current employment situations and their attitudes toward their academic preparation. Factor analysis revealed three main challenges facing engineering graduates: communication; responsibility; self-confidence. Seventeen interviews were conducted to gather information on ways to facilitate this transition. Comments reflected the need for better collaboration between engineering schools and engineering firms. The results will provide insight for engineering colleges, faculty members and administrators into the challenges faced by graduates and their aspirations for a smoother transition into employment.

  12. Human fetal bone cells in delivery systems for bone engineering.

    Science.gov (United States)

    Tenorio, Diene M H; Scaletta, Corinne; Jaccoud, Sandra; Hirt-Burri, Nathalie; Pioletti, Dominique P; Jaques, Bertrand; Applegate, Lee Ann

    2011-11-01

    The aim of this study was to culture human fetal bone cells (dedicated cell banks of fetal bone derived from 14 week gestation femurs) within both hyaluronic acid gel and collagen foam, to compare the biocompatibility of both matrices as potential delivery systems for bone engineering and particularly for oral application. Fetal bone cell banks were prepared from one organ donation and cells were cultured for up to 4 weeks within hyaluronic acid (Mesolis®) and collagen foams (TissueFleece®). Cell survival and differentiation were assessed by cell proliferation assays and histology of frozen sections stained with Giemsa, von Kossa and ALP at 1, 2 and 4 weeks of culture. Within both materials, fetal bone cells could proliferate in three-dimensional structure at ∼70% capacity compared to monolayer culture. In addition, these cells were positive for ALP and von Kossa staining, indicating cellular differentiation and matrix production. Collagen foam provides a better structure for fetal bone cell delivery if cavity filling is necessary and hydrogels would permit an injectable technique for difficult to treat areas. In all, there was high biocompatibility, cellular differentiation and matrix deposition seen in both matrices by fetal bone cells, allowing for easy cell delivery for bone stimulation in vivo. Copyright © 2011 John Wiley & Sons, Ltd.

  13. Comparative Human Health Impact Assessment of Engineered Nanomaterials in the Framework of Life Cycle Assessment.

    Science.gov (United States)

    Fransman, Wouter; Buist, Harrie; Kuijpers, Eelco; Walser, Tobias; Meyer, David; Zondervan-van den Beuken, Esther; Westerhout, Joost; Klein Entink, Rinke H; Brouwer, Derk H

    2017-07-01

    For safe innovation, knowledge on potential human health impacts is essential. Ideally, these impacts are considered within a larger life-cycle-based context to support sustainable development of new applications and products. A methodological framework that accounts for human health impacts caused by inhalation of engineered nanomaterials (ENMs) in an indoor air environment has been previously developed. The objectives of this study are as follows: (i) evaluate the feasibility of applying the CF framework for NP exposure in the workplace based on currently available data; and (ii) supplement any resulting knowledge gaps with methods and data from the life cycle approach and human risk assessment (LICARA) project to develop a modified case-specific version of the framework that will enable near-term inclusion of NP human health impacts in life cycle assessment (LCA) using a case study involving nanoscale titanium dioxide (nanoTiO2 ). The intent is to enhance typical LCA with elements of regulatory risk assessment, including its more detailed measure of uncertainty. The proof-of-principle demonstration of the framework highlighted the lack of available data for both the workplace emissions and human health effects of ENMs that is needed to calculate generalizable characterization factors using common human health impact assessment practices in LCA. The alternative approach of using intake fractions derived from workplace air concentration measurements and effect factors based on best-available toxicity data supported the current case-by-case approach for assessing the human health life cycle impacts of ENMs. Ultimately, the proposed framework and calculations demonstrate the potential utility of integrating elements of risk assessment with LCA for ENMs once the data are available. © 2016 Society for Risk Analysis.

  14. We Have the Spaceship; But Where's the Start Button: Human Engineering Issues in the Age of Long Duration Space Exploration - Presentation

    Science.gov (United States)

    Hamilton, George; Adams, Chris

    2005-01-01

    This viewgraph presentation addresses the following considerations for human factors engineering during long duration human space flight: gravitational adaptation, 2-D to 3-D adaptation, handles, exercise posture, and space ergonomics. The presentation argues that there is an urgent need to advance research is these areas in preparation for future manned missions.

  15. Human Factors, Habitability and Environmental Health and the Human Integration Design Handbook. Volume 2

    Science.gov (United States)

    Houbec, Keith; Tillman, Barry; Connolly, Janis

    2010-01-01

    For decades, Space Life Sciences and NASA as an Agency have considered NASA-STD-3000, Man-Systems Integration Standards, a significant contribution to human spaceflight programs and to human-systems integration in general. The document has been referenced in numerous design standards both within NASA and by organizations throughout the world. With research program and project results being realized, advances in technology and new information in a variety of topic areas now available, the time arrived to update this extensive suite of requirements and design information. During the past several years, a multi-NASA center effort has been underway to write the update to NASA-STD-3000 with standards and design guidance that would be applicable to all future human spaceflight programs. NASA-STD-3001 - Volumes 1 and 2 - and the Human Integration Design Handbook (HIDH) were created. Volume 1, Crew Health, establishes NASA s spaceflight crew health standards for the pre-flight, in-flight, and post-flight phases of human spaceflight. Volume 2, Human Factors, Habitability and Environmental Health, focuses on the requirements of human-system integration and how the human crew interacts with other systems, and how the human and the system function together to accomplish the tasks for mission success. The HIDH is a compendium of human spaceflight history and knowledge, and provides useful background information and research findings. And as the HIDH is a stand-alone companion to the Standards, the maintenance of the document has been streamlined. This unique and flexible approach ensures that the content is current and addresses the fundamental advances of human performance and human capabilities and constraints research. Current work focuses on the development of new sections of Volume 2 and collecting updates to the HIDH. The new sections in development expand the scope of the standard and address mission operations and support operations. This effort is again collaboration

  16. Study on Performance Shaping Factors (PSFs) Quantification Method in Human Reliability Analysis (HRA)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ar Ryum; Jang, Inseok Jang; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Daejon (Korea, Republic of); Park, Jinkyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Jong Hyun [KEPCO, Ulsan (Korea, Republic of)

    2015-05-15

    The purpose of HRA implementation is 1) to achieve the human factor engineering (HFE) design goal of providing operator interfaces that will minimize personnel errors and 2) to conduct an integrated activity to support probabilistic risk assessment (PRA). For these purposes, various HRA methods have been developed such as technique for human error rate prediction (THERP), simplified plant analysis risk human reliability assessment (SPAR-H), cognitive reliability and error analysis method (CREAM) and so on. In performing HRA, such conditions that influence human performances have been represented via several context factors called performance shaping factors (PSFs). PSFs are aspects of the human's individual characteristics, environment, organization, or task that specifically decrements or improves human performance, thus respectively increasing or decreasing the likelihood of human errors. Most HRA methods evaluate the weightings of PSFs by expert judgment and explicit guidance for evaluating the weighting is not provided. It has been widely known that the performance of the human operator is one of the critical factors to determine the safe operation of NPPs. HRA methods have been developed to identify the possibility and mechanism of human errors. In performing HRA methods, the effect of PSFs which may increase or decrease human error should be investigated. However, the effect of PSFs were estimated by expert judgment so far. Accordingly, in order to estimate the effect of PSFs objectively, the quantitative framework to estimate PSFs by using PSF profiles is introduced in this paper.

  17. A New Method to Measure Temperature and Burner Pattern Factor Sensing for Active Engine Control

    Science.gov (United States)

    Ng, Daniel

    1999-01-01

    The determination of the temperatures of extended surfaces which exhibit non-uniform temperature variation is very important for a number of applications including the "Burner Pattern Factor" (BPF) of turbine engines. Exploratory work has shown that use of BPF to control engine functions can result in many benefits, among them reduction in engine weight, reduction in operating cost, increase in engine life, while attaining maximum engine efficiency. Advanced engines are expected to operate at very high temperature to achieve high efficiency. Brief exposure of engine components to higher than design temperatures due to non-uniformity in engine burner pattern can reduce engine life. The engine BPF is a measure of engine temperature uniformity. Attainment of maximum temperature uniformity and high temperatures is key to maximum efficiency and long life. A new approach to determine through the measurement of just one radiation spectrum by a multiwavelength pyrometer is possible. This paper discusses a new temperature sensing approach and its application to determine the BPF.

  18. Generation and genetic engineering of human induced pluripotent stem cells using designed zinc finger nucleases.

    Science.gov (United States)

    Ramalingam, Sivaprakash; London, Viktoriya; Kandavelou, Karthikeyan; Cebotaru, Liudmila; Guggino, William; Civin, Curt; Chandrasegaran, Srinivasan

    2013-02-15

    Zinc finger nucleases (ZFNs) have become powerful tools to deliver a targeted double-strand break at a pre-determined chromosomal locus in order to insert an exogenous transgene by homology-directed repair. ZFN-mediated gene targeting was used to generate both single-allele chemokine (C-C motif) receptor 5 (CCR5)-modified human induced pluripotent stem cells (hiPSCs) and biallele CCR5-modified hiPSCs from human lung fibroblasts (IMR90 cells) and human primary cord blood mononuclear cells (CBMNCs) by site-specific insertion of stem cell transcription factor genes flanked by LoxP sites into the endogenous CCR5 locus. The Oct4 and Sox2 reprogramming factors, in combination with valproic acid, induced reprogramming of human lung fibroblasts to form CCR5-modified hiPSCs, while 5 factors, Oct4/Sox2/Klf4/Lin28/Nanog, induced reprogramming of CBMNCs. Subsequent Cre recombinase treatment of the CCR5-modified IMR90 hiPSCs resulted in the removal of the Oct4 and Sox2 transgenes. Further genetic engineering of the single-allele CCR5-modified IMR90 hiPSCs was achieved by site-specific addition of the large CFTR transcription unit to the remaining CCR5 wild-type allele, using CCR5-specific ZFNs and a donor construct containing tdTomato and CFTR transgenes flanked by CCR5 homology arms. CFTR was expressed efficiently from the endogenous CCR5 locus of the CCR5-modified tdTomato/CFTR hiPSCs. These results suggest that it might be feasible to use ZFN-evoked strategies to (1) generate precisely targeted genetically well-defined patient-specific hiPSCs, and (2) then to reshape their function by targeted addition and expression of therapeutic genes from the CCR5 chromosomal locus for autologous cell-based transgene-correction therapy to treat various recessive monogenic human diseases in the future.

  19. Revised emission factors for gas engines including start/stop emissions

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Malene; Boll Illerup, J.; Birr-Petersen, K.

    2008-06-15

    Liberalisation of the electricity market has led to Danish gas engine plants increasingly converting to the spot and regulating power markets. In order to offer regulating power, plants need to be able to start and stop the engines at the plants quickly. The liberalisation causes a considerable change of operation practice of the engines e.g. less full load operation hours /year. The project provides an inventory determining the scale of the emissions during the start and stop sequence as well as proposals for engine modifications aimed at reducing start/stop emissions. This report includes calculation of emission factors as well as an inventory of total emissions and reduction potentials. (au)

  20. The Impacts of Total System Design Factors on Human Performance in Power Plants

    Directory of Open Access Journals (Sweden)

    A. Azadeh

    2005-01-01

    Full Text Available The objective of this study is to evaluate the impact of total system design factors (TSD on human performance in a power plant. The TSD factors are defined as design factors, which have an impact on the overall performance of the power plants in the context of total human engineering or macroergonomy. The systems being studied are the control rooms and maintenance departments of a 2000 MW thermal power plant? To achieve the above objective the TSD factors were addressed and assessed through a detailed questionnaire. The relationships between TSD factors and human performance were then examined through non-parametric correlation analysis (Kramer’s Phi and Kruskal-Wallis test of means. The selected TSD factors are related to procedures, work assessment, teamwork, self-organization, information exchange and communication. The results of this study show that the TSD factors such as organizational and safety procedures, teamwork, self-organization, job design and information exchange influence human performance in the power plant. The findings also suggest that the selected TSD factors correlate to human performance and must be considered, designed and tested concurrently with the engineering factors at the design phase of the system development cycle. Consequently, total system’s faults and organizational errors are reduced to an acceptable level and human performance is significantly increased. This is a challenging task for designers of power plants but is required if we are facing unforeseen and complex issues of such systems in twenty-first century. The methodology discussed here may be easily extended to all types of power plants.

  1. Engineering synthetic TALE and CRISPR/Cas9 transcription factors for regulating gene expression.

    Science.gov (United States)

    Kabadi, Ami M; Gersbach, Charles A

    2014-09-01

    Engineered DNA-binding proteins that can be targeted to specific sites in the genome to manipulate gene expression have enabled many advances in biomedical research. This includes generating tools to study fundamental aspects of gene regulation and the development of a new class of gene therapies that alter the expression of endogenous genes. Designed transcription factors have entered clinical trials for the treatment of human diseases and others are in preclinical development. High-throughput and user-friendly platforms for designing synthetic DNA-binding proteins present innovative methods for deciphering cell biology and designing custom synthetic gene circuits. We review two platforms for designing synthetic transcription factors for manipulating gene expression: Transcription activator-like effectors (TALEs) and the RNA-guided clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 system. We present an overview of each technology and a guide for designing and assembling custom TALE- and CRISPR/Cas9-based transcription factors. We also discuss characteristics of each platform that are best suited for different applications.

  2. Muscle Tissue Engineering Using Gingival Mesenchymal Stem Cells Encapsulated in Alginate Hydrogels Containing Multiple Growth Factors.

    Science.gov (United States)

    Ansari, Sahar; Chen, Chider; Xu, Xingtian; Annabi, Nasim; Zadeh, Homayoun H; Wu, Benjamin M; Khademhosseini, Ali; Shi, Songtao; Moshaverinia, Alireza

    2016-06-01

    Repair and regeneration of muscle tissue following traumatic injuries or muscle diseases often presents a challenging clinical situation. If a significant amount of tissue is lost the native regenerative potential of skeletal muscle will not be able to grow to fill the defect site completely. Dental-derived mesenchymal stem cells (MSCs) in combination with appropriate scaffold material, present an advantageous alternative therapeutic option for muscle tissue engineering in comparison to current treatment modalities available. To date, there has been no report on application of gingival mesenchymal stem cells (GMSCs) in three-dimensional scaffolds for muscle tissue engineering. The objectives of the current study were to develop an injectable 3D RGD-coupled alginate scaffold with multiple growth factor delivery capacity for encapsulating GMSCs, and to evaluate the capacity of encapsulated GMSCs to differentiate into myogenic tissue in vitro and in vivo where encapsulated GMSCs were transplanted subcutaneously into immunocompromised mice. The results demonstrate that after 4 weeks of differentiation in vitro, GMSCs as well as the positive control human bone marrow mesenchymal stem cells (hBMMSCs) exhibited muscle cell-like morphology with high levels of mRNA expression for gene markers related to muscle regeneration (MyoD, Myf5, and MyoG) via qPCR measurement. Our quantitative PCR analyzes revealed that the stiffness of the RGD-coupled alginate regulates the myogenic differentiation of encapsulated GMSCs. Histological and immunohistochemical/fluorescence staining for protein markers specific for myogenic tissue confirmed muscle regeneration in subcutaneous transplantation in our in vivo animal model. GMSCs showed significantly greater capacity for myogenic regeneration in comparison to hBMMSCs (p engineering.

  3. Human resource management engineering companies Ukraine under crisis

    Directory of Open Access Journals (Sweden)

    Redkva, Oksana Zinoviyivna

    2011-11-01

    Full Text Available The features of personal management at engineering enterprises in the crisis are describes and discuses in the article. The problems and causes of inefficient personnel management are identified. Jome recommendations concerming solving of problem in the sphere of personal management and effective management of engineering enterprises are giver.

  4. Cartilage tissue engineering using pre-aggregated human articular chondrocytes

    Directory of Open Access Journals (Sweden)

    F Wolf

    2008-12-01

    Full Text Available In this study, we first aimed at determining whether human articular chondrocytes (HAC proliferate in aggregates in the presence of strong chondrocyte mitogens. We then investigated if the aggregated cells have an enhanced chondrogenic capacity as compared to cells cultured in monolayer. HAC from four donors were cultured in tissue culture dishes either untreated or coated with 1% agarose in the presence of TGFb-1, FGF-2 and PDGF-BB. Proliferation and stage of differentiation were assessed by measuring respectively DNA contents and type II collagen mRNA. Expanded cells were induced to differentiate in pellets or in Hyaff®-11 meshes and the formed tissues were analysed biochemically for glycosaminoglycans (GAG and DNA, and histologically by Safranin O staining. The amount of DNA in aggregate cultures increased significantly from day 2 to day 6 (by 3.2-fold, but did not further increase with additional culture time. Expression of type II collagen mRNA was about two orders of magnitude higher in aggregated HAC as compared to monolayer expanded cells. Pellets generated by aggregated HAC were generally more intensely stained for GAG than those generated by monolayer-expanded cells. Scaffolds seeded with aggregates accumulated more GAG (1.3-fold than scaffolds seeded with monolayer expanded HAC. In conclusion, this study showed that HAC culture in aggregates does not support a relevant degree of expansion. However, aggregation of expanded HAC prior to loading into a porous scaffold enhances the quality of the resulting tissues and could thus be introduced as an intermediate culture phase in the manufacture of engineered cartilage grafts.

  5. Selected engagement factors and academic learning outcomes of undergraduate engineering students

    Science.gov (United States)

    Justice, Patricia J.

    The concept of student engagement and its relationship to successful student performance and learning outcomes has a long history in higher education (Kuh, 2007). Attention to faculty and student engagement has only recently become of interest to the engineering education community. This interest can be attributed to long-standing research by George Kuh's, National Survey of Student Engagement (NSSE) at the Indiana University Center for Postsecondary Research. In addition, research projects sponsored by the National Science Foundation, the Academic Pathway Study (APS) at the Center for the Advancement of Engineering Education (CAEE) and the Center for the Advancement of Scholarship on Engineering Education (CASEE), Measuring Student and Faculty Engagement in Engineering Education, at the National Academy of Engineering. These research studies utilized the framework and data from the Engineering Change study by the Center for the Study of Higher Education, Pennsylvania State, that evaluated the impact of the new Accreditation Board of Engineering and Technology (ABET) EC2000 "3a through k" criteria identify 11 learning outcomes expected of engineering graduates. The purpose of this study was to explore the extent selected engagement factors of 1. institution, 2. social, 3. cognitive, 4. finance, and 5. technology influence undergraduate engineering students and quality student learning outcomes. Through the descriptive statistical analysis indicates that there maybe problems in the engineering program. This researcher would have expected at least 50% of the students to fall in the Strongly Agree and Agree categories. The data indicated that the there maybe problems in the engineering program problems in the data. The problems found ranked in this order: 1). Dissatisfaction with faculty instruction methods and quality of instruction and not a clear understanding of engineering majors , 2). inadequate Engineering faculty and advisors availability especially applicable

  6. Engineering the oxygen sensing regulation results in an enhanced recombinant human hemoglobin production by Saccharomyces cerevisiae.

    Science.gov (United States)

    Martínez, José L; Liu, Lifang; Petranovic, Dina; Nielsen, Jens

    2015-01-01

    Efficient production of appropriate oxygen carriers for transfusions (blood substitutes or artificial blood) has been pursued for many decades, and to date several strategies have been used, from synthetic polymers to cell-free hemoglobin carriers. The recent advances in the field of metabolic engineering also allowed the generation of different genetically modified organisms for the production of recombinant human hemoglobin. Several studies have showed very promising results using the bacterium Escherichia coli as a production platform, reporting hemoglobin titers above 5% of the total cell protein content. However, there are still certain limitations regarding the protein stability and functionality of the recombinant hemoglobin produced in bacterial systems. In order to overcome these limitations, yeast systems have been proposed as the eukaryal alternative. We recently reported the generation of a set of plasmids to produce functional human hemoglobin in Saccharomyces cerevisiae, with final titers of active hemoglobin exceeding 4% of the total cell protein. In this study, we propose a strategy for further engineering S. cerevisiae by altering the oxygen sensing pathway by deleting the transcription factor HAP1, which resulted in an increase of the final recombinant active hemoglobin titer exceeding 7% of the total cellular protein.

  7. Discussing the Effective Factors on Maintenance of Human Resources

    OpenAIRE

    Bahare Shahriari

    2016-01-01

    In this research, the author has elaborated on detection of effective factors on maintenance and retention of human resources. Since human resources are the most resources for obtaining competitive advantage, it is essential to pay attention to different dimensions of human resources management. One of these dimensions is retention of human resources. Factors such as providing correct and valid information at the time of recruitment, assigning tasks based on competence, existence of a clear c...

  8. Human milk composition: nutrients and bioactive factors.

    Science.gov (United States)

    Ballard, Olivia; Morrow, Ardythe L

    2013-02-01

    This article provides an overview of the composition of human milk, its variation, and its clinical relevance. The composition of human milk is the biological norm for infant nutrition. Human milk also contains many hundreds to thousands of distinct bioactive molecules that protect against infection and inflammation and contribute to immune maturation, organ development, and healthy microbial colonization. Some of these molecules (eg, lactoferrin) are being investigated as novel therapeutic agents. Human milk changes in composition from colostrum to late lactation, within feeds, by gestational age, diurnally, and between mothers. Feeding infants with expressed human milk is increasing.

  9. Imaging shear stress distribution and evaluating the stress concentration factor of the human eye

    Science.gov (United States)

    Joseph Antony, S.

    2015-03-01

    Healthy eyes are vital for a better quality of human life. Historically, for man-made materials, scientists and engineers use stress concentration factors to characterise the effects of structural non-homogeneities on their mechanical strength. However, such information is scarce for the human eye. Here we present the shear stress distribution profiles of a healthy human cornea surface in vivo using photo-stress analysis tomography, which is a non-intrusive and non-X-ray based method. The corneal birefringent retardation measured here is comparable to that of previous studies. Using this, we derive eye stress concentration factors and the directional alignment of major principal stress on the surface of the cornea. Similar to thermometers being used for monitoring the general health in humans, this report provides a foundation to characterise the shear stress carrying capacity of the cornea, and a potential bench mark for validating theoretical modelling of stresses in the human eye in future.

  10. Social Engineering: I-E based Model of Human Weakness for Attack and Defense Investigations

    Directory of Open Access Journals (Sweden)

    Wenjun Fan

    2017-01-01

    Full Text Available Social engineering is the attack aimed to manipulate dupe to divulge sensitive information or take actions to help the adversary bypass the secure perimeter in front of the information-related resources so that the attacking goals can be completed. Though there are a number of security tools, such as firewalls and intrusion detection systems which are used to protect machines from being attacked, widely accepted mechanism to prevent dupe from fraud is lacking. However, the human element is often the weakest link of an information security chain, especially, in a human-centered environment. In this paper, we reveal that the human psychological weaknesses result in the main vulnerabilities that can be exploited by social engineering attacks. Also, we capture two essential levels, internal characteristics of human nature and external circumstance influences, to explore the root cause of the human weaknesses. We unveil that the internal characteristics of human nature can be converted into weaknesses by external circumstance influences. So, we propose the I-E based model of human weakness for social engineering investigation. Based on this model, we analyzed the vulnerabilities exploited by different techniques of social engineering, and also, we conclude several defense approaches to fix the human weaknesses. This work can help the security researchers to gain insights into social engineering from a different perspective, and in particular, enhance the current and future research on social engineering defense mechanisms.

  11. Guide to Human Factors Information Sources.

    Science.gov (United States)

    1984-11-01

    Journal) Quarterly Journal of Experimental Psychology Revista de Psicologia General Y A’-"licada (Review of General Applied.- Psychology) Studlxa...science, engineering anthropmetrv, engincerlng psychology, industrial psychology, organizational psychology, occzpactonal psychology, experimental ...computer processing is the conFusion caused by incompatibilities in numerical tables whose inputs are lifted out of context from the experimental

  12. Engineering the human pluripotent stem cell microenvironment to direct cell fate

    Science.gov (United States)

    Hazeltine, Laurie B.; Selekman, Joshua A.; Palecek, Sean P.

    2013-01-01

    Human pluripotent stem cells (hPSCs), including both embryonic stem cells and induced pluripotent stem cells, offer a potential cell source for research, drug screening, and regenerative medicine applications due to their unique ability to self-renew or differentiate to any somatic cell type. Before the full potential of hPSCs can be realized, robust protocols must be developed to direct their fate. Cell fate decisions are based on components of the surrounding microenvironment, including soluble factors, substrate or extracellular matrix, cell-cell interactions, mechanical forces, and 2D or 3D architecture. Depending on their spatio-temporal context, these components can signal hPSCs to either self-renew or differentiate to cell types of the ectoderm, mesoderm, or endoderm. Researchers working at the interface of engineering and biology have identified various factors which can affect hPSC fate, often based on lessons from embryonic development, and they have utilized this information to design in vitro niches which can reproducibly direct hPSC fate. This review highlights culture systems that have been engineered to promote self-renewal or differentiation of hPSCs, with a focus on studies that have elucidated the contributions of specific microenvironmental cues in the context of those culture systems. We propose the use of microsystems technologies for high-throughput screening of spatial-temporal presentation of cues, as this has been demonstrated to be a powerful approach for differentiating hPSCs to desired cell types. PMID:23510904

  13. Mechanical Stimulation Protocols of Human Derived Cells in Articular Cartilage Tissue Engineering - A Systematic Review.

    Science.gov (United States)

    Khozoee, Baktash; Mafi, Pouya; Mafi, Reza; Khan, Wasim S

    2017-01-01

    Mechanical stimulation is a key factor in articular cartilage generation and maintenance. Bioreactor systems have been designed and built in order to deliver specific types of mechanical stimulation. The focus has been twofold, applying a type of preconditioning in order to stimulate cell differentiation, and to simulate in vivo conditions in order to gain further insight into how cells respond to different stimulatory patterns. Due to the complex forces at work within joints, it is difficult to simulate mechanical conditions using a bioreactor. The aim of this review is to gain a deeper understanding of the complexities of mechanical stimulation protocols by comparing those employed in bioreactors in the context of tissue engineering for articular cartilage, and to consider their effects on cultured cells. Allied and Complementary Medicine 1985 to 2016, Ovid MEDLINE[R] 1946 to 2016, and Embase 1974 to 2016 were searched using key terms. Results were subject to inclusion and exclusion criteria, key findings summarised into a table and subsequently discussed. Based on this review it is overwhelmingly clear that mechanical stimulation leads to increased chondrogenic properties in the context of bioreactor articular cartilage tissue engineering using human cells. However, given the variability and lack of controlled factors between research articles, results are difficult to compare, and a standardised method of evaluating stimulation protocols proved challenging. With improved standardisation in mechanical stimulation protocol reporting, bioreactor design and building processes, along with a better understanding of joint behaviours, we hope to perform a meta-analysis on stimulation protocols and methods.

  14. Pattern of hormone receptors and human epidermal growth factor ...

    African Journals Online (AJOL)

    2015-02-05

    Feb 5, 2015 ... Key words: Breast cancer, human epidermal growth factor receptor 2/neu, immunohistochemistry, ... therapy.[6‑8] Of all these prognostic and predictive factors, ... one of the biggest private medical laboratories in Nigeria.

  15. New dimensions in tissue engineering: possible models for human physiology.

    Science.gov (United States)

    Baar, Keith

    2005-11-01

    Tissue engineering is a discipline of great promise. In some areas, such as the cornea, tissues engineered in the laboratory are already in clinical use. In other areas, where the tissue architecture is more complex, there are a number of obstacles to manoeuvre before clinically relevant tissues can be produced. However, even in areas where clinically relevant tissues are decades away, the tissues being produced at the moment provide powerful new models to aid the understanding of complex physiological processes. This article provides a personal view of the role of tissue engineering in advancing our understanding of physiology, with specific attention being paid to musculoskeletal tissues.

  16. An adipoinductive role of inflammation in adipose tissue engineering: key factors in the early development of engineered soft tissues.

    Science.gov (United States)

    Lilja, Heidi E; Morrison, Wayne A; Han, Xiao-Lian; Palmer, Jason; Taylor, Caroline; Tee, Richard; Möller, Andreas; Thompson, Erik W; Abberton, Keren M

    2013-05-15

    Tissue engineering and cell implantation therapies are gaining popularity because of their potential to repair and regenerate tissues and organs. To investigate the role of inflammatory cytokines in new tissue development in engineered tissues, we have characterized the nature and timing of cell populations forming new adipose tissue in a mouse tissue engineering chamber (TEC) and characterized the gene and protein expression of cytokines in the newly developing tissues. EGFP-labeled bone marrow transplant mice and MacGreen mice were implanted with TEC for periods ranging from 0.5 days to 6 weeks. Tissues were collected at various time points and assessed for cytokine expression through ELISA and mRNA analysis or labeled for specific cell populations in the TEC. Macrophage-derived factors, such as monocyte chemotactic protein-1 (MCP-1), appear to induce adipogenesis by recruiting macrophages and bone marrow-derived precursor cells to the TEC at early time points, with a second wave of nonbone marrow-derived progenitors. Gene expression analysis suggests that TNFα, LCN-2, and Interleukin 1β are important in early stages of neo-adipogenesis. Increasing platelet-derived growth factor and vascular endothelial cell growth factor expression at early time points correlates with preadipocyte proliferation and induction of angiogenesis. This study provides new information about key elements that are involved in early development of new adipose tissue.

  17. Prioritizing the Factors Influencing the Success of Technology Transfer by Reverse Engineering Case Study: Aviation Engines Industry

    Directory of Open Access Journals (Sweden)

    Mohammadreza Shahriari

    2016-02-01

    Full Text Available One of the basic purposes in developing countries had been reduction of their technological gap in different eras. So, technology transfer in developing countries has become one of the key factors of economic growth. But technology transfer is a difficult and complex process, so it can be unsuccessful and may waste time and money or undermine the national technology if performed without enough considering and study. Therefore, according to high ability of interior experts and scientists and country's condition to have a successful technology transfer, Reverse Engineering is used as an effective factor. In this paper supporting 15 experts and using Fuzzy Delphi Method, the effective factors on success of technology transfer by reverse engineering in aviation engines industry will be recognized and then prioritized by members of statistical sample and Analytical Network Process (ANP. Finally, we will have three components, technical knowledge for redesign, technical knowledge for producing, and organizational association with original country that are the most important among the other ten selected components.

  18. Engineering bone tissue substitutes from human induced pluripotent stem cells

    National Research Council Canada - National Science Library

    Giuseppe Maria de Peppo; Iván Marcos-Campos; David John Kahler; Dana Alsalman; Linshan Shang; Gordana Vunjak-Novakovic; Darja Marolt

    2013-01-01

    ...) for bone tissue engineering. We first induced three hiPSC lines with different tissue and reprogramming backgrounds into the mesenchymal lineages and used a combination of differentiation assays, surface antigen profiling...

  19. Ideas in Practice: The Mississippi River: Humanities and Civil Engineering.

    Science.gov (United States)

    Vonalt, Larry; And Others

    1980-01-01

    Describes a course offered for the freshman civil engineering major at the University of Missouri-Rolla. The rationale of developing the course which focuses on the symbolic, social, and technological aspects of the Mississippi River is included. (HM)

  20. Characterizing human pluripotent-stem-cell-derived vascular cells for tissue engineering applications.

    Science.gov (United States)

    Kusuma, Sravanti; Facklam, Amanda; Gerecht, Sharon

    2015-02-15

    Tissue-engineered constructs are rendered useless without a functional vasculature owing to a lack of nutrients and oxygen. Cell-based approaches to reconstruct blood vessels can yield structures that mimic native vasculature and aid transplantation. Vascular derivatives of human induced pluripotent stem cells (hiPSCs) offer opportunities to generate patient-specific therapies and potentially provide unlimited amounts of vascular cells. To be used in engineered vascular constructs and confer therapeutic benefit, vascular derivatives must exhibit additional key properties, including extracellular matrix (ECM) production to confer structural integrity and growth factor production to facilitate integration. In this study, we examine the hypothesis that vascular cells derived from hiPSCs exhibit these critical properties to facilitate their use in engineered tissues. hiPSCs were codifferentiated toward early vascular cells (EVCs), a bicellular population of endothelial cells (ECs) and pericytes, under varying low-oxygen differentiation conditions; subsequently, ECs were isolated and passaged. We found that EVCs differentiated under low-oxygen conditions produced copious amounts of collagen IV and fibronectin as well as vascular endothelial growth factor and angiopoietin 2. EVCs differentiated under atmospheric conditions did not demonstrate such abundant ECM expression, but exhibited greater expression of angiopoietin 1. Isolated ECs could proliferate up to three passages while maintaining the EC marker vascular endothelial cadherin. Isolated ECs demonstrated an increased propensity to produce ECM compared with their EVC correlates and took on an arterial-like fate. These findings illustrate that hiPSC vascular derivates hold great potential for therapeutic use and should continue to be a preferred cell source for vascular construction.

  1. Human Factors in Incident Investigation and Analysis

    Science.gov (United States)

    2002-04-10

    IMISS). Presented at the Society of Naval Architects and Marine Engineers, IMISS Public Meeting, May 2000. 56. Rothblum A.M. (2000). Don’t Just...Mercier K. (2000). Development and Evaluation of the International Maritime Information Safety System (IMISS). Presented at the Society of Naval ...14. Did shiphandling activities contribute? YES Check all activities that apply. NO Go to 15. q a. Maneuver in accordance with sea/river

  2. Immobilization and Application of Electrospun Nanofiber Scaffold-based Growth Factor in Bone Tissue Engineering.

    Science.gov (United States)

    Chen, Guobao; Lv, Yonggang

    2015-01-01

    Electrospun nanofibers have been extensively used in growth factor delivery and regenerative medicine due to many advantages including large surface area to volume ratio, high porosity, excellent loading capacity, ease of access and cost effectiveness. Their relatively large surface area is helpful for cell adhesion and growth factor loading, while storage and release of growth factor are essential to guide cellular behaviors and tissue formation and organization. In bone tissue engineering, growth factors are expected to transmit signals that stimulate cellular proliferation, migration, differentiation, metabolism, apoptosis and extracellular matrix (ECM) deposition. Bolus administration is not always an effective method for the delivery of growth factors because of their rapid diffusion from the target site and quick deactivation. Therefore, the integration of controlled release strategy within electrospun nanofibers can provide protection for growth factors against in vivo degradation, and can manipulate desired signal at an effective level with extended duration in local microenvironment to support tissue regeneration and repair which normally takes a much longer time. In this review, we provide an overview of growth factor delivery using biomimetic electrospun nanofiber scaffolds in bone tissue engineering. It begins with a brief introduction of different kinds of polymers that were used in electrospinning and their applications in bone tissue engineering. The review further focuses on the nanofiber-based growth factor delivery and summarizes the strategies of growth factors loading on the nanofiber scaffolds for bone tissue engineering applications. The perspectives on future challenges in this area are also pointed out.

  3. Training in Human Relations for Engineers at the Ecole Superieure D'Informatique-Electronique-Automatique (ESIEA).

    Science.gov (United States)

    Lafargue, M.; And Others

    1986-01-01

    Points out the need to provide engineers with training in human relations. Describes the process of developing a document defining the problem and steps to be taken toward solution, submitted to students for their evaluation. (JM)

  4. Training in Human Relations for Engineers at the Ecole Superieure D'Informatique-Electronique-Automatique (ESIEA).

    Science.gov (United States)

    Lafargue, M.; And Others

    1986-01-01

    Points out the need to provide engineers with training in human relations. Describes the process of developing a document defining the problem and steps to be taken toward solution, submitted to students for their evaluation. (JM)

  5. Collision Avoidance System (CAS): Human Factors Engineering Evaluation.

    Science.gov (United States)

    1982-12-01

    personnel indicated that the CAS console was much too big for the limited amount of space available on RANGER’s bridge. The console is 40 inches wide...avoidance (C/A) data. > RANGE * 12//2 < (T >~ LOG SPEED 4 10.0 KT < E1 i >~ HEADING 4 270 DEG * < J [ > BRGCRSR * 000 DEG4C/ ADATA < - > TRIAL SPD 4 0 <EJ

  6. Human factors for engineering: A South African study

    CSIR Research Space (South Africa)

    Venter, Karien

    2013-10-01

    Full Text Available and crash analysis. The paper then reports on the driver fatigue study where self-reported questionnaires were administered to drivers frequenting the road. Driver responses contributed to a better understanding of where and when fatigue sets in on the N3...

  7. Human Factors Engineering Bibliographic Series. Volume 5, 1967 Literature

    Science.gov (United States)

    1976-03-01

    phosphatidyl glycerol fraction of the plasma phosplsoliplft t;*came e10rated during the corbat period, as did the phosphatidic Acid , W*ila the cardiolipin...baede"). Liptdl are oxidized, by muscle tissue during czerclie. fT. major routia. 4f euply of fatty acids for ts,,; Oxidation teie distutsod... acids , maInly trlg itcrarldes of muscle tissue. Physical training lower$ the content of arilycar- Idea in ista and IIver. fuskirk I.R. & flands:, J

  8. Human Factors Engineering Testing of Aircraft Cockpit Lighting Systems

    Science.gov (United States)

    2011-07-15

    the subjective sensation. Candela (formerly candle) The international scientific unit of luminous intensity in a specified direction. One... candela is one lumen per steradian or 1/60 the intensity of a square centimeter of a black body radiator operated at the freezing point of platinum (2,047...1- candela source at the center. One footcandle is the illumination on one square foot of surface over which is evenly distributed one lumen. One

  9. Military Aircrew Seating: a Human Factors Engineering Approach

    Science.gov (United States)

    1989-12-01

    especially in the dynamic environment, proved to be a significant challenge (Luciani, Ratino, McGrew, and Suiza , 1983). Wilder et al. (1982) collected EMG...an under vibration (pp. 235-262), New York: Elsevier Scientific Publishing Company. Luciani, D.O., Ratino, D.A., "cGrew, D.R. and Suiza , R.I. (1983

  10. HFE (Human Factors Engineering) Technology for Navy Weapon System Acquisition.

    Science.gov (United States)

    1979-07-01

    uncovering of improved propulsion systems, sensors , weapons, etc., by industry or governr-ient agencies, may in.tiate the development of a new weapon system...needs. (No. A-109) _L a f. Tailor an acquisition stratagy for each program, as soon as the agency decides to solict alternative system design concepto

  11. Gelatin-based hydrogel for vascular endothelial growth factor release in peripheral nerve tissue engineering.

    Science.gov (United States)

    Gnavi, S; di Blasio, L; Tonda-Turo, C; Mancardi, A; Primo, L; Ciardelli, G; Gambarotta, G; Geuna, S; Perroteau, I

    2017-02-01

    Hydrogels are promising materials in regenerative medicine applications, due to their hydrophilicity, biocompatibility and capacity to release drugs and growth factors in a controlled manner. In this study, biocompatible and biodegradable hydrogels based on blends of natural polymers were used in in vitro and ex vivo experiments as a tool for VEGF-controlled release to accelerate the nerve regeneration process. Among different candidates, the angiogenic factor VEGF was selected, since angiogenesis has been long recognized as an important and necessary step during tissue repair. Recent studies have pointed out that VEGF has a beneficial effect on motor neuron survival and Schwann cell vitality and proliferation. Moreover, VEGF administration can sustain and enhance the growth of regenerating peripheral nerve fibres. The hydrogel preparation process was optimized to allow functional incorporation of VEGF, while preventing its degradation and denaturation. VEGF release was quantified through ELISA assay, whereas released VEGF bioactivity was validated in human umbilical vein endothelial cells (HUVECs) and in a Schwann cell line (RT4-D6P2T) by assessing VEGFR-2 and downstream effectors Akt and Erk1/2 phosphorylation. Moreover, dorsal root ganglia explants cultured on VEGF-releasing hydrogels displayed increased neurite outgrowth, providing confirmation that released VEGF maintained its effect, as also confirmed in a tubulogenesis assay. In conclusion, a gelatin-based hydrogel system for bioactive VEGF delivery was developed and characterized for its applicability in neural tissue engineering. Copyright © 2014 John Wiley & Sons, Ltd. Copyright © 2014 John Wiley & Sons, Ltd.

  12. Human Factors in Software Development Processes: Measuring System Quality

    DEFF Research Database (Denmark)

    Abrahão, Silvia; Baldassarre, Maria Teresa; Caivano, Danilo

    2016-01-01

    Software Engineering and Human-Computer Interaction look at the development process from different perspectives. They apparently use very different approaches, are inspired by different principles and address different needs. But, they definitively have the same goal: develop high quality software...

  13. Human Factors and Robotics: Current Status and Future Prospects.

    Science.gov (United States)

    1981-10-01

    since they can be very important. For easy human information processing, ours is called the " simbiosis " model. (For- give the misspelling.) The nine...engineering investigation. In the " simbiosis " model, surveillance will consist of monitoring robots both directly and through computer-driven displays and

  14. Phase 2 Clinical Trial of Intraoral Grafting of Human Tissue-Engineered Oral Mucosa

    Science.gov (United States)

    2013-10-01

    Engineered Oral Mucosa   PRINCIPAL INVESTIGATOR: Stephen E. Feinberg DDS, MS, PhD CONTRACTING ORGANIZATION: University of Michigan Ann Arbor MI 4810...September 29, 4. TITLE AND SUBTITLE Phase II Clinical Trial of Intraoral Grafting of Human Tissue-Engineered Oral Mucosa   5a. CONTRACT NUMBER...human EVPOME for soft tissue intraoral grafting procedures compared to the “gold standard” palatal oral mucosa (POM) graft. The study will determine

  15. Genetic engineering of human ES and iPS cells using TALE nucleases

    OpenAIRE

    Hockemeyer, Dirk; Wang, Haoyi; Kiani, Samira; Lai, Christine S.; Gao, Qing; Cassady, John P.; Cost, Gregory J.; Zhang, Lei; Santiago, Yolanda; Miller, Jeffrey C; Zeitler, Bryan; Cherone, Jennifer M.; Meng, Xiangdong; Hinkley, Sarah J; Rebar, Edward J.

    2011-01-01

    Targeted genetic engineering of human pluripotent cells is a prerequisite for exploiting their full potential. Such genetic manipulations can be achieved using site-specific nucleases. Here we engineered transcription activator–like effector nucleases (TALENs) for five distinct genomic loci. At all loci tested we obtained human embryonic stem cell (ESC) and induced pluripotent stem cell (iPSC) clones carrying transgenic cassettes solely at the TALEN-specified location. Our data suggest that T...

  16. IN VITRO EFFECT OF SILVER ENGINEERED NANOPARTICLES ON HUMAN SPERMATOZOA

    Directory of Open Access Journals (Sweden)

    G. Terzuoli

    2012-08-01

    Full Text Available Silver (Ag NPs are among the most commercialized NPs due to their antimicrobial potential. They are highly at- tractive for possible applications in manufacture of medical device. However there is a serious lack of information concerning their impact on the human health and the environment. Moreover studies on the effects of NPs on ejaculated sperm are rather limited. For these reasons our study explored the in vitro effects of Ag NPs on human ejaculated spermatozoa. Ag NPs have been produced, characterized, and furnished by Colorobbia Industry, Sovigliana (Vinci, Florence, Italy. Aliquots of total semen were incubated at 37°C for 60 minutes (min and 120 min at the concentration of 125 μM, 250 μM, and 500 μM of engineered Ag NPs. The control was represented by specimens of semen samples treated with the same procedure without NPs. After the incubations, sperm motility was evaluated following WHO guidelines and sperm viability was eval- uated by Eosin Y test. At the end of incubation with Ag NPs the samples were processed by a Field Emission Gun-based Scanning Transmition Electron Microscope/ Energy Dispertion Spectrometry (STEM/EDS. We observed that sperm motility percentage was significantly reduced in semen samples treated with 125 μM, 250 μM and 500 μM of Ag NPs after 60 min and 120 min of incubation respect to controls (P<0.001; P<0.01, 125 μM at 60 min. Sperm viability percentage significantly decreased in a progressive manner after 125 μM (P<0.05, 250 μM (P<0.05 and 500 μM (P<0.001 Ag NPs incubation at 60 min and 120 min. We did not find any significant difference between the values assessed after 60 min of NPs incubation and those estimated after 120 min of incubation. In the control samples, the sperm motility and the sperm viability percentages significantly decreased after 120 min of incubation (P<0.001 respect to the basal values. Ag NPs were undetectable in all treated samples by STEM/EDS. These in vitro results show a

  17. Human factors/ergonomics as a systems discipline? "The human use of human beings" revisited

    DEFF Research Database (Denmark)

    Hollnagel, Erik

    2014-01-01

    Discussions of the possible future of Human factors/ergonomics (HFE) usually take the past for granted in the sense that the future of HFE is assumed to be more of the same. This paper argues that the nature of work in the early 2010s is so different from the nature of work when HFE was formulated...

  18. WHO DOES WHAT IN HUMAN FACTORS/ERGONOMICS IN MALAYSIA?

    Science.gov (United States)

    Ahasan, Rabiul

    2014-12-01

    Individuals' expertise in human factors and ergonomics in Malaysia was studied with a view to aiding in gauging the confusion and conjectures of the expertise in this area. The choices and preferences of individuals in dealing with the current issues of human factors and ergonomics were examined. The authors suggest the ways to meet ethical challenges in their work and professions.

  19. NAS Human Factors Safety Research Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — This laboratory conducts an integrated program of research on the relationship of factors concerning individuals, work groups, and organizations as employees perform...

  20. Bioactive electrospun scaffolds delivering growth factors and genes for tissue engineering applications

    NARCIS (Netherlands)

    Ji, W.; Sun, Y.; Yang, F.; Beucken, J.J.J.P van den; Fan, M.; Chen, Z.; Jansen, J.A.

    2011-01-01

    A biomaterial scaffold is one of the key factors for successful tissue engineering. In recent years, an increasing tendency has been observed toward the combination of scaffolds and biomolecules, e.g. growth factors and therapeutic genes, to achieve bioactive scaffolds, which not only provide physic

  1. Human Reliability Analysis for Design: Using Reliability Methods for Human Factors Issues

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Laurids Boring

    2010-11-01

    This paper reviews the application of human reliability analysis methods to human factors design issues. An application framework is sketched in which aspects of modeling typically found in human reliability analysis are used in a complementary fashion to the existing human factors phases of design and testing. The paper provides best achievable practices for design, testing, and modeling. Such best achievable practices may be used to evaluate and human system interface in the context of design safety certifications.

  2. Crew interface analysis: Selected articles on space human factors research, 1987 - 1991

    Science.gov (United States)

    Bagian, Tandi (Compiler)

    1993-01-01

    As part of the Flight Crew Support Division at NASA, the Crew Interface Analysis Section is dedicated to the study of human factors in the manned space program. It assumes a specialized role that focuses on answering operational questions pertaining to NASA's Space Shuttle and Space Station Freedom Programs. One of the section's key contributions is to provide knowledge and information about human capabilities and limitations that promote optimal spacecraft and habitat design and use to enhance crew safety and productivity. The section provides human factors engineering for the ongoing missions as well as proposed missions that aim to put human settlements on the Moon and Mars. Research providing solutions to operational issues is the primary objective of the Crew Interface Analysis Section. The studies represent such subdisciplines as ergonomics, space habitability, man-computer interaction, and remote operator interaction.

  3. Human factors aspects of advanced instrumentation in the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.J.

    1989-01-01

    An important consideration in regards to the use of advanced instrumentation in the nuclear industry is the interface between the instrumentation system and the human. A survey, oriented towards identifying the human factors aspects of digital instrumentation, was conducted at a number of United States (US) and Canadian nuclear vendors and utilities. Human factors issues, subsumed under the categories of computer-generated displays, controls, organizational support, training, and related topics were identified. 20 refs., 2 tabs.

  4. Applying Human Factors during the SIS Life Cycle

    Energy Technology Data Exchange (ETDEWEB)

    Avery, K.

    2010-05-05

    Safety Instrumented Systems (SIS) are widely used in U.S. Department of Energy's (DOE) nonreactor nuclear facilities for safety-critical applications. Although use of the SIS technology and computer-based digital controls, can improve performance and safety, it potentially introduces additional complexities, such as failure modes that are not readily detectable. Either automated actions or manual (operator) actions may be required to complete the safety instrumented function to place the process in a safe state or mitigate a hazard in response to an alarm or indication. DOE will issue a new standard, Application of Safety Instrumented Systems Used at DOE Nonreactor Nuclear Facilities, to provide guidance for the design, procurement, installation, testing, maintenance, operation, and quality assurance of SIS used in safety significant functions at DOE nonreactor nuclear facilities. The DOE standard focuses on utilizing the process industry consensus standard, American National Standards Institute/ International Society of Automation (ANSI/ISA) 84.00.01, Functional Safety: Safety Instrumented Systems for the Process Industry Sector, to support reliable SIS design throughout the DOE complex. SIS design must take into account human-machine interfaces and their limitations and follow good human factors engineering (HFE) practices. HFE encompasses many diverse areas (e.g., information display, user-system interaction, alarm management, operator response, control room design, and system maintainability), which affect all aspects of system development and modification. This paper presents how the HFE processes and principles apply throughout the SIS life cycle to support the design and use of SIS at DOE nonreactor nuclear facilities.

  5. Application of fault factor method to fault detection and diagnosis for space shuttle main engine

    Science.gov (United States)

    Cha, Jihyoung; Ha, Chulsu; Ko, Sangho; Koo, Jaye

    2016-09-01

    This paper deals with an application of the multiple linear regression algorithm to fault detection and diagnosis for the space shuttle main engine (SSME) during a steady state. In order to develop the algorithm, the energy balance equations, which balances the relation among pressure, mass flow rate and power at various locations within the SSME, are obtained. Then using the measurement data of some important parameters of the engine, fault factors which reflects the deviation of each equation from the normal state are estimated. The probable location of each fault and the levels of severity can be obtained from the estimated fault factors. This process is numerically demonstrated for the SSME at 104% Rated Propulsion Level (RPL) by using the simulated measurement data from the mathematical models of the engine. The result of the current study is particularly important considering that the recently developed reusable Liquid Rocket Engines (LREs) have staged-combustion cycles similarly to the SSME.

  6. A comparison of educational factors promoting or discouraging the intent to remain in engineering by gender

    Science.gov (United States)

    Amelink, Catherine T.; Meszaros, Peggy S.

    2011-03-01

    This study seeks to examine key extrinsic and intrinsic factors that encourage or discourage persistence in attaining an engineering degree and pursuing an engineering-related career among both male and female undergraduates. Quantitative and qualitative findings from nine participating undergraduate degree programmes reveal that career expectations formulated through educational experiences as undergraduates play a key role in motivating students. Among females, faculty interaction in the classroom, such as feedback received and the degree to which the faculty treat them with respect, is an important encouraging factor. For both males and females, discouraging elements of the undergraduate experience include the amount of time for coursework, competition in engineering classes and grades. The findings have several practical implications that faculty and administrators can employ in shaping the undergraduate experience to encourage short- and long-term interest in engineering among both male and female students.

  7. Approaches to Software Engineering: A Human-Centred Perspective

    OpenAIRE

    Bannon, Liam J.

    2010-01-01

    International audience; The field of software engineering has been evolving since its inception in 1968. Arguments as to the exact nature of the field, whether it should be conceived as a real engineering profession, the role of formal methods, whether it is as much an art as a science, etc., continue to divide both practitioners and academics. My purpose here is not to debate these particular topics, but rather to approach the field from the outside, coming as I do from a long period of invo...

  8. Engineering phenolics metabolism in the grasses using transcription factors

    Energy Technology Data Exchange (ETDEWEB)

    Grotewold, Erich [The Ohio State University

    2013-07-26

    The economical competitiveness of agriculture-derived biofuels can be significantly enhanced by increasing biomass/acre yields and by furnishing the desired carbon balance for facilitating liquid fuel production (e.g., ethanol) or for high-energy solid waste availability to be used as biopower (e.g., for electricity production). Biomass production and carbon balance are tightly linked to the biosynthesis of phenolic compounds, which are found in crops and in agricultural residues either as lignins, as part of the cell wall, or as soluble phenolics which play a variety of functions in the biology of plants. The grasses, in particular maize, provide the single major source of agricultural biomass, offering significant opportunities for increasing renewable fuel production. Our laboratory has pioneered the use of transcription factors for manipulating plant metabolic pathways, an approach that will be applied here towards altering the composition of phenolic compounds in maize. Previously, we identified a small group of ten maize R2R3-MYB transcription factors with all the characteristics of regulators of different aspects of phenolic biosynthesis. Here, we propose to investigate the participation of these R2R3-MYB factors in the regulation of soluble and insoluble maize phenolics, using a combination of over-expression and down-regulation of these transcription factors in transgenic maize cultured cells and in maize plants. Maize cells and plants altered in the activity of these regulatory proteins will be analyzed for phenolic composition by targeted metabolic profiling. Specifically, we will I) Investigate the effect of gain- and loss-of-function of a select group of R2R3-MYB transcription factors on the phenolic composition of maize plants and II) Identify the biosynthetic genes regulated by each of the selected R2R3-MYB factors. While a likely outcome of these studies are transgenic maize plants with altered phenolic composition, this research will significantly

  9. Osteogenic Differentiation Capacity of In Vitro Cultured Human Skeletal Muscle for Expedited Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Chunlei Miao

    2017-01-01

    Full Text Available Expedited bone tissue engineering employs the biological stimuli to harness the intrinsic regenerative potential of skeletal muscle to trigger the reparative process in situ to improve or replace biological functions. When genetically modified with adenovirus mediated BMP2 gene transfer, muscle biopsies from animals have demonstrated success in regenerating bone within rat bony defects. However, it is uncertain whether the human adult skeletal muscle displays an osteogenic potential in vitro when a suitable biological trigger is applied. In present study, human skeletal muscle cultured in a standard osteogenic medium supplemented with dexamethasone demonstrated significant increase in alkaline phosphatase activity approximately 24-fold over control at 2-week time point. More interestingly, measurement of mRNA levels revealed the dramatic results for osteoblast transcripts of alkaline phosphatase, bone sialoproteins, transcription factor CBFA1, collagen type I, and osteocalcin. Calcified mineral deposits were demonstrated on superficial layers of muscle discs after an extended 8-week osteogenic induction. Taken together, these are the first data supporting human skeletal muscle tissue as a promising potential target for expedited bone regeneration, which of the technologies is a valuable method for tissue repair, being not only effective but also inexpensive and clinically expeditious.

  10. Osteogenic Differentiation Capacity of In Vitro Cultured Human Skeletal Muscle for Expedited Bone Tissue Engineering

    Science.gov (United States)

    Miao, Chunlei; Zhou, Lulu; Tian, Lufeng; Zhang, Yingjie; Zhang, Wei; Yang, Fanghong; Liu, Tianyi

    2017-01-01

    Expedited bone tissue engineering employs the biological stimuli to harness the intrinsic regenerative potential of skeletal muscle to trigger the reparative process in situ to improve or replace biological functions. When genetically modified with adenovirus mediated BMP2 gene transfer, muscle biopsies from animals have demonstrated success in regenerating bone within rat bony defects. However, it is uncertain whether the human adult skeletal muscle displays an osteogenic potential in vitro when a suitable biological trigger is applied. In present study, human skeletal muscle cultured in a standard osteogenic medium supplemented with dexamethasone demonstrated significant increase in alkaline phosphatase activity approximately 24-fold over control at 2-week time point. More interestingly, measurement of mRNA levels revealed the dramatic results for osteoblast transcripts of alkaline phosphatase, bone sialoproteins, transcription factor CBFA1, collagen type I, and osteocalcin. Calcified mineral deposits were demonstrated on superficial layers of muscle discs after an extended 8-week osteogenic induction. Taken together, these are the first data supporting human skeletal muscle tissue as a promising potential target for expedited bone regeneration, which of the technologies is a valuable method for tissue repair, being not only effective but also inexpensive and clinically expeditious. PMID:28210626

  11. Analysis of OPLA scaffolds for bone engineering constructs using human jaw periosteal cells.

    Science.gov (United States)

    Alexander, Dorothea; Hoffmann, Jürgen; Munz, Adelheid; Friedrich, Björn; Geis-Gerstorfer, Jürgen; Reinert, Siegmar

    2008-03-01

    For bone regeneration constructs using human jaw periosteal cells (JPC) the extent of osteoinductive ability of different three-dimensional scaffolds is not yet established. We analyzed open-cell polylactic acid (OPLA) scaffolds for their suitability as bone engineering constructs using human JPC. Cell adhesion and spreading was visualized on the surface of scaffolds by scanning electron microscopy. JPC proliferation within OPLA scaffolds was compared with proliferation within collagen and calcium phosphate scaffolds. We found a significant increase of proliferation rates in OPLA scaffolds versus Coll/CaP scaffolds at three time points. Live-measurements of oxygen consumption within the cell-seeded scaffolds indicate that the in vitro culturing time should not exceed 12-15 days. OPLA scaffolds, which were turned out to be the most beneficial for JPC growth, were chosen for osteogenic differentiation experiments with or without BMP-2. Gene expression analyses demonstrated induction of several osteogenic genes (alkaline phosphatase, osterix, Runx-2 and insulin-like growth factor) within the 3D-scaffolds after 12 days of in vitro culturing. Element analysis by EDX spectrometry of arising nodules during osteogenesis demonstrated that JPC growing within OPLA scaffolds are able to form CaP particles. We conclude that OPLA scaffolds provide a promising environment for bone substitutes using human JPC.

  12. Influencing Factors of Rural Human Consumption in China

    Directory of Open Access Journals (Sweden)

    Jun LI

    2014-12-01

    Full Text Available The paper combines the social capital theory, the ordered choice model, and the case study in order to analyze the influence factors of the rural human consumption. The results show the presence of inverted U shape curve relation between human consumption amount and age. Human communication range, income, the highest single human consumption amount and the minimum amount, occupation, family population, the existing of human consumption capacity and the scope of the existing relationships between interpersonal relationship satisfaction and other factors on human consumption level has positive influence on human consumption level. Domestic researches on human behaviour are wide, but most of the studies are focused on the social, human, and psychological disciplines. For the origin of human consumption, scholars focus on four aspects like novelty, human or mutual needs. This research is based on field investigation conducted in Niuxintai village, Liaoning Province, in order to understand the current situation of the rural human consumption in China, and to explain the function and influencing factors of human consumption.

  13. Engineering Design Handbook: Environmental Series. Part Three. Induced Environmental Factors

    Science.gov (United States)

    1976-01-20

    3-18 3-12. Instruments for Sample Collection 9-19 3-13. Major Deserts of the World 3-20 3-14. Corrosion of Open- hearth Steel...lightning, but otherwise is overshadowed by artificial sources. Each of these induced environmental factors is also influenced greatly by natural...identification: 1. Open- hearth furnaces 2. Incineration 3. Cement plants 4. Fuel oil combustion 5. Coal combustion plus diffraction effects apply

  14. Cultivating Engineers' Humanity: Fostering Cosmopolitanism in a Technical University

    Science.gov (United States)

    Boni, Alejandra; MacDonald, Penny; Peris, Jordi

    2012-01-01

    This paper aims to explore the potential of a curriculum designed to develop Nussbaum's cosmopolitan abilities through two elective subjects offered to future engineers in a Spanish Technical University. To this end, Nussbaum's proposition of cosmopolitan abilities is presented in relation to the broader academic literature on cosmopolitanism and…

  15. Musculoskeletal tissue engineering with human umbilical cord mesenchymal stromal cells

    Science.gov (United States)

    Wang, Limin; Ott, Lindsey; Seshareddy, Kiran; Weiss, Mark L; Detamore, Michael S

    2011-01-01

    Multipotent mesenchymal stromal cells (MSCs) hold tremendous promise for tissue engineering and regenerative medicine, yet with so many sources of MSCs, what are the primary criteria for selecting leading candidates? Ideally, the cells will be multipotent, inexpensive, lack donor site morbidity, donor materials should be readily available in large numbers, immunocompatible, politically benign and expandable in vitro for several passages. Bone marrow MSCs do not meet all of these criteria and neither do embryonic stem cells. However, a promising new cell source is emerging in tissue engineering that appears to meet these criteria: MSCs derived from Wharton’s jelly of umbilical cord MSCs. Exposed to appropriate conditions, umbilical cord MSCs can differentiate in vitro along several cell lineages such as the chondrocyte, osteoblast, adipocyte, myocyte, neuronal, pancreatic or hepatocyte lineages. In animal models, umbilical cord MSCs have demonstrated in vivo differentiation ability and promising immunocompatibility with host organs/tissues, even in xenotransplantation. In this article, we address their cellular characteristics, multipotent differentiation ability and potential for tissue engineering with an emphasis on musculoskeletal tissue engineering. PMID:21175290

  16. Human Resources Development in the Field of Electrical Engineering

    Science.gov (United States)

    Ishigame, Atsushi

    It is becoming increasingly clear that the decline in popularity in the field of electrical engineering is undergoing rapidly due to the fact that more young people are moving away from the science. The primary goal of this paper is to recognize the importance of educational new effort and, second, suggest social-provided education support needed to meet this challenge.

  17. Assessment factors for human health risk assessment: A discussion paper

    NARCIS (Netherlands)

    Vermeire, T.; Stevenson, H.; Pieters, M.N.; Rennen, M.; Slob, W.; Hakkert, B.C.

    1999-01-01

    The general goal of this discussion paper is to contribute toward the further harmonization of human health risk assessment. It first discusses the development of a formal, harmonized set of assessment factors. The status quo with regard to assessment factors is reviewed, that is, the type of factor

  18. Factors affecting transmission of mucosal human papillomavirus

    NARCIS (Netherlands)

    N.J. Veldhuijzen; P.J. Snijders; P. Reiss; C.J. Meijer; J.H. van de Wijgert

    2010-01-01

    Human papillomavirus (HPV) is the most common sexually transmitted infection. The effect of HPV on public health is especially related to the burden of anogenital cancers, most notably cervical cancer. Determinants of exposure to HPV are similar to those for most sexually transmitted infections, but

  19. Alternative Control Technologies: Human Factors Issues

    Science.gov (United States)

    1998-10-01

    vertical vibration to the 29,4, 1980, pp 462-466. head and shoulders of seated men", Royal Aircraft Lee, J. M.; Chartier , V. L.; Hartmann, D. P.; Lee, G...Suarez, P. F., Rogers , S., K., Ruck, D. W., for Effective Human-Computer Interaction", 2nd edition, Arndt, C., and Kabrisky, M., "A facial feature

  20. Decellularization of human and porcine lung tissues for pulmonary tissue engineering.

    Science.gov (United States)

    O'Neill, John D; Anfang, Rachel; Anandappa, Annabelle; Costa, Joseph; Javidfar, Jeffrey; Wobma, Holly M; Singh, Gopal; Freytes, Donald O; Bacchetta, Matthew D; Sonett, Joshua R; Vunjak-Novakovic, Gordana

    2013-09-01

    The only definitive treatment for end-stage organ failure is orthotopic transplantation. Lung extracellular matrix (LECM) holds great potential as a scaffold for lung tissue engineering because it retains the complex architecture, biomechanics, and topologic specificity of the lung. Decellularization of human lungs rejected from transplantation could provide "ideal" biologic scaffolds for lung tissue engineering, but the availability of such lungs remains limited. The present study was designed to determine whether porcine lung could serve as a suitable substitute for human lung to study tissue engineering therapies. Human and porcine lungs were procured, sliced into sheets, and decellularized by three different methods. Compositional, ultrastructural, and biomechanical changes to the LECM were characterized. The suitability of LECM for cellular repopulation was evaluated by assessing the viability, growth, and metabolic activity of human lung fibroblasts, human small airway epithelial cells, and human adipose-derived mesenchymal stem cells over a period of 7 days. Decellularization with 3-[(3-Cholamidopropyl)dimethylammonio]-1-propanesulfonate (CHAPS) showed the best maintenance of both human and porcine LECM, with similar retention of LECM proteins except for elastin. Human and porcine LECM supported the cultivation of pulmonary cells in a similar way, except that the human LECM was stiffer and resulted in higher metabolic activity of the cells than porcine LECM. Porcine lungs can be decellularized with CHAPS to produce LECM scaffolds with properties resembling those of human lungs, for pulmonary tissue engineering. We propose that porcine LECM can be an excellent screening platform for the envisioned human tissue engineering applications of decellularized lungs. Copyright © 2013 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  1. Human resource practices as predictors of engineering staff's organisational commitment

    National Research Council Canada - National Science Library

    Melinde Coetzee; Jeremy Mitonga-Monga; Benita Swart

    2014-01-01

      Human resource practices are an important means of retaining professionally qualified employees and improving and increasing their future level of organisational performance in today's turbulent...

  2. Recent technology products from Space Human Factors research

    Science.gov (United States)

    Jenkins, James P.

    1991-01-01

    The goals of the NASA Space Human Factors program and the research carried out concerning human factors are discussed with emphasis given to the development of human performance models, data, and tools. The major products from this program are described, which include the Laser Anthropometric Mapping System; a model of the human body for evaluating the kinematics and dynamics of human motion and strength in microgravity environment; an operational experience data base for verifying and validating the data repository of manned space flights; the Operational Experience Database Taxonomy; and a human-computer interaction laboratory whose products are the display softaware and requirements and the guideline documents and standards for applications on human-computer interaction. Special attention is given to the 'Convoltron', a prototype version of a signal processor for synthesizing the head-related transfer functions.

  3. The Human Factors of Sensor Fusion

    Science.gov (United States)

    2008-05-01

    humans tend to use a combination of deductive and inductive logic, as well as intuition and emotion to reach general conclusions; however, if...into a machine but only resulting in a warning or caution and not as the actual emotion felt by the observer. The element of fear induced by the...extract meaning from text or spoken language which is veiled by semantic features such as sarcasm or formalism that contain a very great amount of

  4. Growth factor delivery-based tissue engineering: general approaches and a review of recent developments.

    Science.gov (United States)

    Lee, Kangwon; Silva, Eduardo A; Mooney, David J

    2011-02-06

    The identification and production of recombinant morphogens and growth factors that play key roles in tissue regeneration have generated much enthusiasm and numerous clinical trials, but the results of many of these trials have been largely disappointing. Interestingly, the trials that have shown benefit all contain a common denominator, the presence of a material carrier, suggesting strongly that spatio-temporal control over the location and bioactivity of factors after introduction into the body is crucial to achieve tangible therapeutic effect. Sophisticated materials systems that regulate the biological presentation of growth factors represent an attractive new generation of therapeutic agents for the treatment of a wide variety of diseases. This review provides an overview of growth factor delivery in tissue engineering. Certain fundamental issues and design strategies relevant to the material carriers that are being actively pursued to address specific technical objectives are discussed. Recent progress highlights the importance of materials science and engineering in growth factor delivery approaches to regenerative medicine.

  5. Tissue engineered bone using select growth factors: A comprehensive review of animal studies and clinical translation studies in man

    Directory of Open Access Journals (Sweden)

    D Gothard

    2014-10-01

    Full Text Available There is a growing socio-economic need for effective strategies to repair damaged bone resulting from disease, trauma and surgical intervention. Bone tissue engineering has received substantial investment over the last few decades as a result. A multitude of studies have sought to examine the efficacy of multiple growth factors, delivery systems and biomaterials within in vivo animal models for the repair of critical-sized bone defects. Defect repair requires recapitulation of in vivo signalling cascades, including osteogenesis, chondrogenesis and angiogenesis, in an orchestrated spatiotemporal manner. Strategies to drive parallel, synergistic and consecutive signalling of factors including BMP-2, BMP-7/OP-1, FGF, PDGF, PTH, PTHrP, TGF-β3, VEGF and Wnts have demonstrated improved bone healing within animal models. Enhanced bone repair has also been demonstrated in the clinic following European Medicines Agency and Food and Drug Administration approval of BMP-2, BMP-7/OP-1, PDGF, PTH and PTHrP. The current review assesses the in vivo and clinical data surrounding the application of growth factors for bone regeneration. This review has examined data published between 1965 and 2013. All bone tissue engineering studies investigating in vivo response of the growth factors listed above, or combinations thereof, utilising animal models or human trials were included. All studies were compiled from PubMed-NCBI using search terms including ‘growth factor name’, ‘in vivo’, ‘model/animal’, ‘human’, and ‘bone tissue engineering’. Focus is drawn to the in vivo success of osteoinductive growth factors incorporated within material implants both in animals and humans, and identifies the unmet challenges within the skeletal regenerative area.

  6. Usability: Human Research Program - Space Human Factors and Habitability

    Science.gov (United States)

    Sandor, Aniko; Holden, Kritina L.

    2009-01-01

    The Usability project addresses the need for research in the area of metrics and methodologies used in hardware and software usability testing in order to define quantifiable and verifiable usability requirements. A usability test is a human-in-the-loop evaluation where a participant works through a realistic set of representative tasks using the hardware/software under investigation. The purpose of this research is to define metrics and methodologies for measuring and verifying usability in the aerospace domain in accordance with FY09 focus on errors, consistency, and mobility/maneuverability. Usability metrics must be predictive of success with the interfaces, must be easy to obtain and/or calculate, and must meet the intent of current Human Systems Integration Requirements (HSIR). Methodologies must work within the constraints of the aerospace domain, be cost and time efficient, and be able to be applied without extensive specialized training.

  7. Is Law a Humanity: (Or Is It More like Engineering)?

    Science.gov (United States)

    Howarth, David

    2004-01-01

    Law often appears to be in a limbo between the Social Sciences and the Humanities. Movements within legal scholarship itself, the law and economics movement and the law and literature movement, represent efforts to portray law as a social science or as a humanity. But if one looks at what lawyers do, one finds that law is more like…

  8. Reverse Engineering Human Pathophysiology with Organs-on-Chips.

    Science.gov (United States)

    Ingber, Donald E

    2016-03-10

    While studies of cultured cells have led to new insights into biological control, greater understanding of human pathophysiology requires the development of experimental systems that permit analysis of intercellular communications and tissue-tissue interactions in a more relevant organ context. Human organs-on-chips offer a potentially powerful new approach to confront this long-standing problem.

  9. Engineering Substantially Prolonged Human Lifespans: Biotechnological Enhancement and Ethics

    NARCIS (Netherlands)

    Derkx, P.H.J.M.

    2006-01-01

    Substantial extension of the human lifespan has recently become a subject of lively debate. One reason for this is the completion in 2001 of the Human Genome Project and the experimental avenues for biogerontological research it has opened. Another is recent theoretical progress in biogerontology.

  10. Evaluation of engineered AAV capsids for hepatic factor IX gene transfer in murine and canine models.

    Science.gov (United States)

    Markusic, David M; Nichols, Timothy C; Merricks, Elizabeth P; Palaschak, Brett; Zolotukhin, Irene; Marsic, Damien; Zolotukhin, Sergei; Srivastava, Arun; Herzog, Roland W

    2017-05-01

    Adeno-associated virus (AAV) gene therapy vectors have shown the best outcomes in human clinical studies for the treatment of genetic diseases such as hemophilia. However, these pivotal investigations have also identified several challenges. For example, high vector doses are often used for hepatic gene transfer, and cytotoxic T lymphocyte responses against viral capsid may occur. Therefore, achieving therapy at reduced vector doses and other strategies to reduce capsid antigen presentation are desirable. We tested several engineered AAV capsids for factor IX (FIX) expression for the treatment of hemophilia B by hepatic gene transfer. These capsids lack potential phosphorylation or ubiquitination sites, or had been generated through molecular evolution. AAV2 capsids lacking either a single lysine residue or 3 tyrosine residues directed substantially higher coagulation FIX expression in mice compared to wild-type sequence or other mutations. In hemophilia B dogs, however, expression from the tyrosine-mutant vector was merely comparable to historical data on AAV2. Evolved AAV2-LiC capsid was highly efficient in hemophilia B mice but lacked efficacy in a hemophilia B dog. Several alternative strategies for capsid modification improve the in vivo performance of AAV vectors in hepatic gene transfer for correction of hemophilia. However, capsid optimization solely in mouse liver may not predict efficacy in other species and thus is of limited translational utility.

  11. Studying risk factors associated with Human Leptospirosis

    Directory of Open Access Journals (Sweden)

    Ramachandra Kamath

    2014-01-01

    Full Text Available Background: Leptospirosis is one of the most under diagnosed and underreported disease in both developed and developing countries including India. It is established that environmental conditions and occupational habit of the individuals put them at risk of acquiring disease, which varies from community to community. Various seroprevalence studies across the world have documented emerging situation of this neglected tropical disease, but limited have probed to identify the risk factors, especially in India. Objectives: The objective of this study was to identify the environmental and occupational risk factors associated with the disease in Udupi District. Materials and Methods: This population-based case-control study was carried out in Udupi, a District in Southern India from April 2012 until August 2012. Udupi is considered to be endemic for Leptospirosis and reported 116 confirmed cases in the year 2011. Seventy of 116 laboratory confirmed cases and 140 sex matched neighborhood healthy controls participated in the study. A predesigned, semi-structured and validated questionnaire was used for data collection through house to house visit and observations were noted about environmental conditions. Univariate analysis followed by multivariate analysis (back ward conditional logistic regression was performed by using STATA version 9.2 (StataCorp, College Station, TX, USA to identify potential risk factors. Results: Occupational factors such as outdoor activities (matched odds ratio [OR] of 3.95, 95% confidence interval [CI]: 1.19-13.0, presence of cut or wound at body parts during work (matched OR: 4.88, CI: 1.83-13.02 and environmental factors such as contact with rodents through using the food materials ate by rat (matched OR: 4.29, CI: 1.45-12.73 and contact with soil or water contaminated with urine of rat (matched OR: 4.58, CI: 1.43-14.67 were the risk factors identified to be associated with disease. Conclusion: Leptospirosis is still

  12. Human factors in resuscitation: Lessons learned from simulator studies

    Directory of Open Access Journals (Sweden)

    Hunziker S

    2010-01-01

    Full Text Available Medical algorithms, technical skills, and repeated training are the classical cornerstones for successful cardiopulmonary resuscitation (CPR. Increasing evidence suggests that human factors, including team interaction, communication, and leadership, also influence the performance of CPR. Guidelines, however, do not yet include these human factors, partly because of the difficulties of their measurement in real-life cardiac arrest. Recently, clinical studies of cardiac arrest scenarios with high-fidelity video-assisted simulations have provided opportunities to better delineate the influence of human factors on resuscitation team performance. This review focuses on evidence from simulator studies that focus on human factors and their influence on the performance of resuscitation teams. Similar to studies in real patients, simulated cardiac arrest scenarios revealed many unnecessary interruptions of CPR as well as significant delays in defibrillation. These studies also showed that human factors play a major role in these shortcomings and that the medical performance depends on the quality of leadership and team-structuring. Moreover, simulated video-taped medical emergencies revealed that a substantial part of information transfer during communication is erroneous. Understanding the impact of human factors on the performance of a complex medical intervention like resuscitation requires detailed, second-by-second, analysis of factors involving the patient, resuscitative equipment such as the defibrillator, and all team members. Thus, high-fidelity simulator studies provide an important research method in this challenging field.

  13. Establishment and characterization of human engineered cells stably expressing large extracellular matrix proteins.

    Science.gov (United States)

    Kwon, Daekee; Kang, Gwang-Sik; Han, Dong Keun; Park, Kwideok; Kim, Jae-Hwan; Lee, Soo-Hong

    2014-01-01

    Commercially available extracellular matrix (ECM) hydrogel-coated culture plates have been used to study the relationship between the ECM microenvironment and stem cell behavior. However, it is unclear whether ECM-coated dishes mimic the natural ECM microenvironment because the architecture of the ECM is constructed of randomly distributed fibers. The purpose of this study was the production and confirmation of human engineered cell lines stably expressing large ECM proteins such as collagen I/II and fibronectin. First, large (over 10 kb) ECM vectors encoding human collagen I/II and fibronectin were constructed and the circular vectors were linearized. Second, the linear ECM vectors were introduced into immortalized human embryonic kidney cells using various transfection methods. The polyethylenimine and liposome methods showed higher efficiencies than electroporation for transfection of these large vectors. Third, human ECM engineered cells were established by stable integration of the vector into the genomic DNA and resulted in stable overexpression of mRNA and proteins. In summary, human engineered cell lines stably expressing large ECM proteins such as human collagen I/II and fibronectin were successfully prepared, and secretion of the ECM components into the surrounding environment was confirmed by immunocytochemistry. Thus, human ECM engineered cells naturally secreting ECM components could be valuable for studying the relationship between the native ECM microenvironment and stem cell behavior.

  14. Human flexor tendon tissue engineering: decellularization of human flexor tendons reduces immunogenicity in vivo.

    Science.gov (United States)

    Raghavan, Shyam S; Woon, Colin Y L; Kraus, Armin; Megerle, Kai; Choi, Matthew S S; Pridgen, Brian C; Pham, Hung; Chang, James

    2012-04-01

    In mutilating hand injuries, tissue engineered tendon grafts may provide a reconstructive solution. We have previously described a method to decellularize cadaveric human flexor tendons while preserving mechanical properties and biocompatibility. The purpose of this study is to evaluate the immunogenicity and strength of these grafts when implanted into an immunocompetent rat model. Cadaveric human flexor tendons were divided into two groups. Group 1 was untreated, and Group 2 was decellularized by treatment with sodium dodecyl sulfate (SDS), ethylenediaminetetraacetic acid (EDTA), and peracetic acid (PAA). Both groups were then analyzed for the presence of major histocompatibility complexes by immunohistochemistry (IHC). Pair-matched tendons from each group were then placed into the dorsal subcutaneous tissue and anchored to the spinal ligaments of Wistar rats for 2 or 4 weeks, and harvested. The infiltration of B-cells and macrophages was determined using IHC. The explants where then subjected to mechanical testing to determine the ultimate tensile stress (UTS) and elastic modulus (EM). Statistical analysis was performed using a paired Student's t-test. The decellularization protocol successfully removed cells and MHC-1 complexes. At 2 weeks after implantation, there was increased infiltration of B-cells in Group 1 (untreated) compared with Group 2 (acellular), both in the capsule and tendon substance. There was improved ultimate tensile stress (UTS, 42.7 ± 8.3 vs. 22.8 ± 7.8 MPa, ptendons that were decellularized. At 4 weeks, there was continued B-cell infiltration in Group 1 (untreated) compared with Group 2 (acellular). There was no appreciable difference in macrophage infiltration at both time points. At 4 weeks Group 2 (acellular) demonstrated persistently greater UTS (40.5 ± 9.1 vs. 14.6 ± 4.2 MPa, ptendons that were decellularized with SDS, EDTA, and PAA resulted in removal of cellular antigens and a decreased immune response when placed into Wistar

  15. Human factors survey of advanced instrumentation and controls

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.J.

    1989-01-01

    A survey oriented towards identifying the human factors issues in regard to the use of advanced instrumentation and controls (I C) in the nuclear industry was conducted. A number of United States (US) and Canadian nuclear vendors and utilities were participants in the survey. Human factors items, subsumed under the categories of computer-generated displays (CGD), controls, organizational support, training, and related topics, were discussed. The survey found the industry to be concerned about the human factors issues related to the implementation of advanced I C. Fifteen potential human factors problems were identified. They include: the need for an advanced I C guideline equivalent to NUREG-0700; a role change in the control room from operator to supervisor; information overload; adequacy of existing training technology for advanced I C; and operator acceptance and trust. 11 refs., 1 tab.

  16. Factors likely to enhance mycotoxin introduction into the human diet ...

    African Journals Online (AJOL)

    Factors likely to enhance mycotoxin introduction into the human diet through maize in Kenya. ... African Journal of Food, Agriculture, Nutrition and Development ... are no strict regulations that impose limits on the concentration of mycotoxins in ...

  17. An Integrated Simulation System for Human Factors Study

    CERN Document Server

    Wang, Ying; Bennis, Fouad; Chablat, Damien

    2007-01-01

    It has been reported that virtual reality can be a useful tool for ergonomics study. The proposed integrated simulation system aims at measuring operator's performance in an interactive way for 2D control panel design. By incorporating some sophisticated virtual reality hardware/software, the system allows natural human-system and/or human-human interaction in a simulated virtual environment; enables dynamic objective measurement of human performance; and evaluates the quality of the system design in human factors perspective based on the measurement. It can also be for operation training for some 2D control panels.

  18. Surface-engineered substrates for improved human pluripotent stem cell culture under fully defined conditions.

    Science.gov (United States)

    Saha, Krishanu; Mei, Ying; Reisterer, Colin M; Pyzocha, Neena Kenton; Yang, Jing; Muffat, Julien; Davies, Martyn C; Alexander, Morgan R; Langer, Robert; Anderson, Daniel G; Jaenisch, Rudolf

    2011-11-15

    The current gold standard for the culture of human pluripotent stem cells requires the use of a feeder layer of cells. Here, we develop a spatially defined culture system based on UV/ozone radiation modification of typical cell culture plastics to define a favorable surface environment for human pluripotent stem cell culture. Chemical and geometrical optimization of the surfaces enables control of early cell aggregation from fully dissociated cells, as predicted from a numerical model of cell migration, and results in significant increases in cell growth of undifferentiated cells. These chemically defined xeno-free substrates generate more than three times the number of cells than feeder-containing substrates per surface area. Further, reprogramming and typical gene-targeting protocols can be readily performed on these engineered surfaces. These substrates provide an attractive cell culture platform for the production of clinically relevant factor-free reprogrammed cells from patient tissue samples and facilitate the definition of standardized scale-up friendly methods for disease modeling and cell therapeutic applications.

  19. Efficient engineering of vascularized ectopic bone from human embryonic stem cell-derived mesenchymal stem cells.

    Science.gov (United States)

    Domev, Hagit; Amit, Michal; Laevsky, Ilana; Dar, Ayelet; Itskovitz-Eldor, Joseph

    2012-11-01

    Human mesenchymal stem cells (hMSCs) can be derived from various adult and fetal tissues. However, the quality of tissues for the isolation of adult and fetal hMSCs is donor dependent with a nonreproducible yield. In addition, tissue engineering and cell therapy require large-scale production of a pure population of lineage-restricted stem cells that can be easily induced to differentiate into a specific cell type. Therefore, human embryonic stem cells (hESCs) can provide an alternative, plentiful source for generation of reproducible hMSCs. We have developed efficient differentiation protocols for derivation of hMSCs from hESCs, including coculture with murine OP9 stromal cells and feeder layer-free system. Our protocols have resulted in the generation of up to 49% of hMSCs, which expressed CD105, CD90, CD29, and CD44. The hMSCs exhibited high adipogenic, chondrocytic, and osteogenic differentiation in vitro. The latter correlated with osteocalcin secretion and vascular endothelial growth factor (VEGF) production by the differentiating hMSCs. hMSC-derived osteoblasts further differentiated and formed ectopic bone in vivo, and induced the formation of blood vessels in Matrigel implants. Our protocol enables generation of a purified population of hESC-derived MSCs, with the potential of differentiating into several mesodermal lineages, and particularly into vasculogenesis-inducing osteoblasts, which can contribute to the development of bone repair protocols.

  20. Factors Affecting the Behavior of Engineering Students toward Safety Practices in the Machine Shop

    Directory of Open Access Journals (Sweden)

    Jessie Kristian M. Neria

    2015-08-01

    Full Text Available This study aimed to determine the factors that affect the behavior of engineering student toward safety practices in the machine shop. Descriptive type of research was utilized in the study. Results showed that most of the engineering students clearly understand the signage shown in the machine shop. Students are aware that they should not leave the machines unattended. Most of the engineering students handle and use the machine properly. The respondents have an average extent of safety practices in the machine shop which means that they are applying safety practices in their every activity in machine shop. There is strong relationship between the safety practices and the factors affecting behavior in terms of signage, reminder of teacher and rules and regulation.

  1. Human factors assessment mechanical compression tools

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, C. [BC Research Inc., Vancouver, BC (Canada)

    1999-09-01

    The design and use of mechanical compression tools in electrical distribution functions were examined from the point of view of effects of design and use of tools on human operators. Various alternative tools such as manual compression tools, battery operated tools, wedge pressure tools, hydraulic tools, and insulating piercing connectors were also examined for purposes of comparison. Results of the comparative assessment were summarized and a tool satisfaction ratings table was produced for Burndy MD6, Huskie-Robo (REC 258) and Ampact (small) tools, rating level of effort, fatigue experienced, tool mass, force required to crimp, ease of use, comfort while using the tool, maneuverability, and overall satisfaction. Both the battery operated tool as well as the wedge pressure tool have been found to have ergonomic advantages over the mechanical compression tool.

  2. Human Factors in Financial Trading: An Analysis of Trading Incidents.

    Science.gov (United States)

    Leaver, Meghan; Reader, Tom W

    2016-09-01

    This study tests the reliability of a system (FINANS) to collect and analyze incident reports in the financial trading domain and is guided by a human factors taxonomy used to describe error in the trading domain. Research indicates the utility of applying human factors theory to understand error in finance, yet empirical research is lacking. We report on the development of the first system for capturing and analyzing human factors-related issues in operational trading incidents. In the first study, 20 incidents are analyzed by an expert user group against a referent standard to establish the reliability of FINANS. In the second study, 750 incidents are analyzed using distribution, mean, pathway, and associative analysis to describe the data. Kappa scores indicate that categories within FINANS can be reliably used to identify and extract data on human factors-related problems underlying trading incidents. Approximately 1% of trades (n = 750) lead to an incident. Slip/lapse (61%), situation awareness (51%), and teamwork (40%) were found to be the most common problems underlying incidents. For the most serious incidents, problems in situation awareness and teamwork were most common. We show that (a) experts in the trading domain can reliably and accurately code human factors in incidents, (b) 1% of trades incur error, and (c) poor teamwork skills and situation awareness underpin the most critical incidents. This research provides data crucial for ameliorating risk within financial trading organizations, with implications for regulation and policy. © 2016, Human Factors and Ergonomics Society.

  3. Human Factors of Queuing: A Library Circulation Model.

    Science.gov (United States)

    Mansfield, Jerry W.

    1981-01-01

    Classical queuing theories and their accompanying service facilities totally disregard the human factors in the name of efficiency. As library managers we need to be more responsive to human needs in the design of service points and make every effort to minimize queuing and queue frustration. Five references are listed. (Author/RAA)

  4. Human Factors Issues for Interaction with Bio-Inspired Swarms

    Science.gov (United States)

    2012-10-01

    subtle leaders of fish schools. Pheromone trails also suggest a way to support human interaction as has been explored to a limited extent... Human Factors issues for Interaction with Bio-Inspired Swarms Michael Lewis*, Michael Goodrich**, Katia Sycara+, Mark Steinberg++ * School of...Enabling a human to control such bio-inspired systems is a considerable challenge due to the limitations of each individual robot and the sheer

  5. Human Factors Throughout the Life Cycle: Lessons Learned from the Shuttle Program. [Human Factors in Ground Processing

    Science.gov (United States)

    Kanki, Barbara G.

    2011-01-01

    With the ending of the Space Shuttle Program, it is critical that we not forget the Human Factors lessons we have learned over the years. At every phase of the life cycle, from manufacturing, processing and integrating vehicle and payload, to launch, flight operations, mission control and landing, hundreds of teams have worked together to achieve mission success in one of the most complex, high-risk socio-technical enterprises ever designed. Just as there was great diversity in the types of operations performed at every stage, there was a myriad of human factors that could further complicate these human systems. A single mishap or close call could point to issues at the individual level (perceptual or workload limitations, training, fatigue, human error susceptibilities), the task level (design of tools, procedures and aspects of the workplace), as well as the organizational level (appropriate resources, safety policies, information access and communication channels). While we have often had to learn through human mistakes and technological failures, we have also begun to understand how to design human systems in which individuals can excel, where tasks and procedures are not only safe but efficient, and how organizations can foster a proactive approach to managing risk and supporting human enterprises. Panelists will talk about their experiences as they relate human factors to a particular phase of the shuttle life cycle. They will conclude with a framework for tying together human factors lessons-learned into system-level risk management strategies.

  6. An Investigation of Factors Related to Self-Efficacy for Java Programming among Engineering Students

    Science.gov (United States)

    Askar, Petek; Davenport, David

    2009-01-01

    The purpose of this study was to examine the factors related to self-efficacy for Java programming among first year engineering students. An instrument assessing Java programming self-efficacy was developed from the computer programming self-efficacy scale of Ramalingam & Wiedenbeck. The instrument was administered at the beginning of the…

  7. The productivity from a human perspective: Dimensions and factors

    Directory of Open Access Journals (Sweden)

    Mirza Marvel Cequea

    2011-11-01

    Full Text Available Purpose: The purpose of this paper is to review the literature, for both theoretical foundations and empirical research, in order to establish relationships between the variables related to human factors and their impact on productivity.Design/methodology/approach: The strategy employed corresponds to a descriptive non-experimental design, which is the establishment of three criteria for the literature review, in order to narrow down the topic to research works relating productivity with the human factor. This was investigated in databases and journals dealing with related topics, in addition to consulting doctoral theses and published books concerning the influence of human factors on productivity. About 250 papers which were considered the most relevant for the research were selected.Findings:  As a result of this exploration the classification of the factors in two dimensions that are manifested in people when they act in organizations was highlighted: the psychological and the psychosocial dimension. Human factors included in these dimensions are: individual factors (motivation, skills, job satisfaction, identification, commitment and involvement with the organization, group factors (participation, cohesion and management conflict and organizational factors (organizational culture, organizational climate and leadership. All these factors have an impact on the productivity of the organization and are addressed in this research.Originality/value: The selected variables were used to formulate a model that incorporates the human factors identified and considers the phenomenon in a comprehensive manner. It will be addressed through multivariate analysis, with the possible application of structural equations in order to assess the causal relationships that may exist between factors and productivity.

  8. Effects of mechanical loading on human mesenchymal stem cells for cartilage tissue engineering.

    Science.gov (United States)

    Choi, Jane Ru; Yong, Kar Wey; Choi, Jean Yu

    2017-05-19

    Today, articular cartilage damage is a major health problem, affecting people of all ages. The existing conventional articular cartilage repair techniques, such as autologous chondrocyte implantation (ACI), microfracture, and mosaicplasty, have many shortcomings which negatively affect their clinical outcomes. Therefore, it is essential to develop an alternative and efficient articular repair technique that can address those shortcomings. Cartilage tissue engineering, which aims to create a tissue-engineered cartilage derived from human mesenchymal stem cells (MSCs), shows great promise for improving articular cartilage defect therapy. However, the use of tissue-engineered cartilage for the clinical therapy of articular cartilage defect still remains challenging. Despite the importance of mechanical loading to create a functional cartilage has been well demonstrated, the specific type of mechanical loading and its optimal loading regime is still under investigation. This review summarizes the most recent advances in the effects of mechanical loading on human MSCs. First, the existing conventional articular repair techniques and their shortcomings are highlighted. The important parameters for the evaluation of the tissue-engineered cartilage, including chondrogenic and hypertrophic differentiation of human MSCs are briefly discussed. The influence of mechanical loading on human MSCs is subsequently reviewed and the possible mechanotransduction signaling is highlighted. The development of non-hypertrophic chondrogenesis in response to the changing mechanical microenvironment will aid in the establishment of a tissue-engineered cartilage for efficient articular cartilage repair. © 2017 Wiley Periodicals, Inc.

  9. Development of safety and regulatory requirements for Korean next generation reactor - Development of human factors design review guidelines (II)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Woon; Oh, In Suk; Lee, Hyun Chul; Cheon, Se Woo [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-02-01

    The objective of this study is to develop human factors engineering program review guidelines and alarm system review guidelines in order to resolve the two major technical issues: '25. Human Factors Engineering Program Review Model' and '26. Review Criteria for Human Factors Aspects of Advanced Controls and Instrumentation', which are related to the development of human factors safety regulation guides being performed by KINS. For the development of human factors program review guidelines, we made a Korean version of NUREG-0711 and added our comments by considering Korean regulatory situation and the characteristics of the KNGR design, and reviewing the reference documents of NURGE-0711. We also computerized the Korean version of NUREG-0711, additional comments, and selected portion of the reference documents for the developer of safety regulation guides at KINS to see the contents comparatively at a glance and use them easily. For the development of alarm system design review guidelines, we made a Korean version of NUREG/CR-6105, which was published by NRC in 1994 as a guideline document for the human factors review of alarm systems. Then we updated the guidelines by reviewing the literature related to alarm design that published after 1994. 12 refs., 11 figs., 2 tabs. (Author)

  10. Study of the various factors influencing deposit formation and operation of gasoline engine injection systems

    Science.gov (United States)

    Stepien, Z.

    2016-09-01

    Generally, ethanol fuel emits less pollutants than gasoline, it is completely renewable product and has the potential to reduce greenhouse gases emission but, at the same time can present a multitude of technical challenges to engine operation conditions including creation of very adverse engine deposits. These deposits increasing fuel consumption and cause higher exhaust emissions as well as poor performance in drivability. This paper describes results of research and determination the various factors influencing injector deposits build-up of ethanol-gasoline blends operated engine. The relationship between ethanol-gasoline fuel blends composition, their treatment, engine construction as well as its operation conditions and fuel injectors deposit formation has been investigated. Simulation studies of the deposit formation endanger proper functioning of fuel injection system were carried out at dynamometer engine testing. As a result various, important factors influencing the deposit creation process and speed formation were determined. The ability to control of injector deposits by multifunctional detergent-dispersant additives package fit for ethanol-gasoline blends requirements was also investigated.

  11. Survey Result of the Engineering Undergraduate Student's “Human Performance”

    Science.gov (United States)

    Nakayama, Minoru; Takahashi, Hideaki; Kusakabe, Osamu; Ohtaguchi, Kazuhisa; Mizutani, Nobuyasu

    Development of engineer's “Human Performance” is being required to respond to various changes. “Human Performace” is defined as an ability of putting own knowledge and skill to a practical issue. Current engineering undergraduate education promotes to learn this ability. To examine effectiveness of the educational program, a questionnaire consisting of 66 items was developed and the survey was conducted across eight universities. As results, most students recognize importance of the ability, but their achievement is lower for English communication skill and adaptation of cultural difference. They learned the ability on laboratory experience for their thesis, experiment class, club activities, part-time jobs and other activities.

  12. Human Cardiac Tissue Engineering: From Pluripotent Stem Cells to Heart Repair

    Science.gov (United States)

    Jackman, Christopher P.; Shadrin, Ilya Y.; Carlson, Aaron L.; Bursac, Nenad

    2014-01-01

    Engineered cardiac tissues hold great promise for use in drug and toxicology screening, in vitro studies of human physiology and disease, and as transplantable tissue grafts for myocardial repair. In this review, we discuss recent progress in cell-based therapy and functional tissue engineering using pluripotent stem cell-derived cardiomyocytes and we describe methods for delivery of cells into the injured heart. While significant hurdles remain, notable advances have been made in the methods to derive large numbers of pure human cardiomyocytes, mature their phenotype, and produce and implant functional cardiac tissues, bringing the field a step closer to widespread in vitro and in vivo applications. PMID:25599018

  13. Engineering Data Compendium. Human Perception and Performance. Volume 3

    Science.gov (United States)

    1988-01-01

    Breitmeyer, B. G. (1975). Sim- cies to sinusoidal gratings. Vision human observers: A probabilistic pie reaction time as a measure of Research. 16...oscilloscope; viewed at optical infinity through a plano - convex lens (153 mm diameter, 340 mm focal length) one focal length from display • Patch wom

  14. Protein engineering,expression,and activity of a novel fusion protein possessing keratinocyte growth factor 2 and fibronectin

    Institute of Scientific and Technical Information of China (English)

    Wonmo Kang; Junhyeog Jang

    2009-01-01

    Growth factor-induced proliferation and differentiation often require adhesion of cells to the extracellular matrix proteins such as fibronectin(FN).In this study,we aimed to investigate the effect of protein engineering of the keratinocyte growth factor 2(KGF2)fused to the FN on the mitogenic activity of KGF2.The fusion protein(KGF2-FN10),which was expressed in Escherichia coli,showed significantly enhanced mitogenic activity of KGF2 on human keratinocytes.Moreover,KGF2-FN10 fusion protein showed significantly increased activity to differentiate keratinocytes from native KGF2.In conclusion,these results suggest that KGF2-FN10 fusion protein has certain advantages over native KGF2 and may offer a novel strategy to potentiate the therapeutic effect of KGF2.

  15. Effectiveness of human factors simulator; Eficiencia del simulador de factores humanos

    Energy Technology Data Exchange (ETDEWEB)

    Moragas, F.

    2015-07-01

    En 2011, ANAV started the exploitation of the Human Factors Simulator installed in TECNATOM Training Center located in L'Hospital de L'Infant Tarragona. AVAN's Strategic Plan includes the Action Plan for the improvement of human behavior. The plan includes improving the efficiency of the efficiency of the human factors simulator. It is proposed to improve the efficiency into two different terms: winning effectiveness in modeling behaviors, and interweaving the activities in the simulator with the actual strategy of promoting Safety culture and human behaviour. (Author)

  16. Human factors and technology environment in multinational project: problems and solutions; Factores humanos y entorno tecnologico en proyectos multinacionales: dificultades y soluciones

    Energy Technology Data Exchange (ETDEWEB)

    Jardi Besa, X.; Munoz Cervantes, A.

    2012-07-01

    At the onset of nuclear projects in Spain, there was an import of nuclear technology. In a second phase, there was a transfer of technology. Subsequently, there was an adaptation of the technology. In this evolution, comparable to that of other countries, were involved several countries, overcoming the difficulties of human factors involved. The current nuclear projects multinationals have a new difficulty: the different industrial technological environments. This paper will address the organizational challenges of multinational engineering projects, in the type of project and the human factors of the participating companies.

  17. Impact of Bulldozer's Engine Load Factor on Fuel Consumption, CO2 Emission and Cost

    Directory of Open Access Journals (Sweden)

    V. Kecojevic

    2011-01-01

    Full Text Available Problem statement: Bulldozers consume a large amount of diesel fuel and consequently produce a significant quantity of CO2. Environmental and economic cost issues related to fuel consumption and CO2 emission represent a substantial challenge to the mining industry. Approach: Impact of engine load conditions on fuel consumption and the subsequent CO2 emission and cost was analyzed for Caterpillar bulldozers. Results were compared with the data on bulldozers' fuel consumption from an operating coal surface mine in the United States. Results: There is a strong linear correlation among power, fuel consumption and engine load factor. Reduction in load factor by 15% may significantly reduce the fuel consumption and the CO2 emission. Conclusion/Recommendation: Application of appropriate bulldozer's load factor may help mine operators manage fuel consumption, cost and environmental burden.

  18. A comparative analysis of reading strategies across ESP students of humanities and engineering

    Directory of Open Access Journals (Sweden)

    Mehdi Vaez Dalili

    2013-04-01

    Full Text Available This study set out to explore whether significant differences existed between two groups of EFL students of different fields of study (i.e. humanities and engineering in terms of their metacognitive awareness and use of certain reading strategies while reading English for Specific Purposes (ESP texts. Seventy lower-intermediate college-level students (35 engineering students and 35 students of humanities completed the Metacognitive Awareness of Reading Strategies Inventory (Mokhtari & Reichard, 2002 to measure their metacognitive awareness of ESP reading strategies. The inventory includes 3 strategy subscales with 30 items: Global Reading Strategies (GLOB, Problem-Solving Strategies (PROB, and Support Reading Strategies (SUP. A series of t-tests were conducted to figure out the differences between the two groups of students in connection with each of the strategies in the MARSI inventory. The results showed that in spite of the fact that the two groups were studying different fields of study, they reported strikingly similar patterns of reading strategy awareness and confirmed having used almost all of the strategies while reading ESP materials. However, the engineering students reported using some types of reading strategies more frequently than did the humanities students. The findings of the study will not only explain the differences and similarities between engineering and humanities students, but also help to challenge the purely speculative assumption as to the deficiencies in strategy-based ESP reading comprehension of humanities students.

  19. Engineered human broncho-epithelial tissue-like assemblies

    Science.gov (United States)

    Goodwin, Thomas J. (Inventor)

    2012-01-01

    Three-dimensional human broncho-epithelial tissue-like assemblies (TLAs) are produced in a rotating wall vessel (RWV) with microcarriers by coculturing mesenchymal bronchial-tracheal cells (BTC) and bronchial epithelium cells (BEC). These TLAs display structural characteristics and express markers of in vivo respiratory epithelia. TLAs are useful for screening compounds active in lung tissues such as antiviral compounds, cystic fibrosis treatments, allergens, and cytotoxic compounds.

  20. The integration of Human Factors (HF) in the SAR process training course text

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, T.G.

    1995-03-01

    This text provides the technical basis for a two-day course on human factors (HF), as applied to the Safety Analysis Report (SAR) process. The overall objective of this text and course is to: provide the participant with a working knowledge of human factors-related requirements, suggestions for doing a human safety analysis applying a graded approach, and an ability to demonstrate using the results of the human safety analysis, that human factors elements as defined by DOE (human factors engineering, procedures, training, oversight, staffing, qualifications), can support wherever necessary, nuclear safety commitments in the SAR. More specifically, the objectives of the text and course are: (1) To provide the SAR preparer with general guidelines for doing HE within the context of a graded approach for the SAR; (2) To sensitize DOE facility managers and staff, safety analysts and SAR preparers, independent reviewers, and DOE reviewers and regulators, to DOE Order 5480.23 requirements for HE in the SAR; (3) To provide managers, analysts, reviewers and regulators with a working knowledge of HE concepts and techniques within the context of a graded approach for the SAR, and (4) To provide SAR managers and DOE reviewers and regulators with general guidelines for monitoring and coordinating the work of preparers of HE inputs throughout the SAR process, and for making decisions regarding the safety relevance of HE inputs to the SAR. As a ready reference for implementing the human factors requirements of DOE Order 5480.22 and DOE Standard 3009-94, this course text and accompanying two-day course are intended for all persons who are involved in the SAR.

  1. Discovery of insect and human dengue virus host factors.

    Science.gov (United States)

    Sessions, October M; Barrows, Nicholas J; Souza-Neto, Jayme A; Robinson, Timothy J; Hershey, Christine L; Rodgers, Mary A; Ramirez, Jose L; Dimopoulos, George; Yang, Priscilla L; Pearson, James L; Garcia-Blanco, Mariano A

    2009-04-23

    Dengue fever is the most frequent arthropod-borne viral disease of humans, with almost half of the world's population at risk of infection. The high prevalence, lack of an effective vaccine, and absence of specific treatment conspire to make dengue fever a global public health threat. Given their compact genomes, dengue viruses (DENV-1-4) and other flaviviruses probably require an extensive number of host factors; however, only a limited number of human, and an even smaller number of insect host factors, have been identified. Here we identify insect host factors required for DENV-2 propagation, by carrying out a genome-wide RNA interference screen in Drosophila melanogaster cells using a well-established 22,632 double-stranded RNA library. This screen identified 116 candidate dengue virus host factors (DVHFs). Although some were previously associated with flaviviruses (for example, V-ATPases and alpha-glucosidases), most of the DVHFs were newly implicated in dengue virus propagation. The dipteran DVHFs had 82 readily recognizable human homologues and, using a targeted short-interfering-RNA screen, we showed that 42 of these are human DVHFs. This indicates notable conservation of required factors between dipteran and human hosts. This work suggests new approaches to control infection in the insect vector and the mammalian host.

  2. Integrating human factors research and surgery: a review.

    Science.gov (United States)

    Shouhed, Daniel; Gewertz, Bruce; Wiegmann, Doug; Catchpole, Ken

    2012-12-01

    To provide a review of human factors research within the context of surgery. We searched PubMed for relevant studies published from the earliest available date through February 29, 2012. The search was performed using the following keywords: human factors, surgery, errors, teamwork, communication, stress, disruptions, interventions, checklists, briefings, and training. Additional articles were identified by a manual search of the references from the key articles. As 2 human factors specialists, a senior clinician, and a junior clinician, we carefully selected the most appropriate exemplars of research findings with specific relevance to surgical error and safety. Seventy-seven articles of relevance were selected and reviewed in detail. Opinion pieces and editorials were disregarded; the focus was solely on articles based on empirical evidence, with a particular emphasis on prospectively designed studies. The themes that emerged related to the development of human factors theories, the application of those theories within surgery, a specific interest in the concept of flow, and the theoretical basis and value of human-related interventions for improving safety and flow in surgery. Despite increased awareness of safety, errors routinely continue to occur in surgical care. Disruptions in the flow of an operation, such as teamwork and communication failures, contribute significantly to such adverse events. While it is apparent that some incidence of human error is unavoidable, there is much evidence in medicine and other fields that systems can be better designed to prevent or detect errors before a patient is harmed. The complexity of factors leading to surgical errors requires collaborations between surgeons and human factors experts to carry out the proper prospective and observational studies. Only when we are guided by this valid and real-world data can useful interventions be identified and implemented.

  3. Tissue engineering potential of human dermis-isolated adult stem cells from multiple anatomical locations.

    Science.gov (United States)

    Kwon, Heenam; Haudenschild, Anne K; Brown, Wendy E; Vapniarsky, Natalia; Paschos, Nikolaos K; Arzi, Boaz; Hu, Jerry C; Athanasiou, Kyriacos A

    2017-01-01

    Abundance and accessibility render skin-derived stem cells an attractive cell source for tissue engineering applications. Toward assessing their utility, the variability of constructs engineered from human dermis-isolated adult stem (hDIAS) cells was examined with respect to different anatomical locations (foreskin, breast, and abdominal skin), both in vitro and in a subcutaneous, athymic mouse model. All anatomical locations yielded hDIAS cells with multi-lineage differentiation potentials, though adipogenesis was not seen for foreskin-derived hDIAS cells. Using engineered cartilage as a model, tissue engineered constructs from hDIAS cells were compared. Construct morphology differed by location. The mechanical properties of human foreskin- and abdominal skin-derived constructs were similar at implantation, remaining comparable after 4 additional weeks of culture in vivo. Breast skin-derived constructs were not mechanically testable. For all groups, no signs of abnormality were observed in the host. Addition of aggregate redifferentiation culture prior to construct formation improved chondrogenic differentiation of foreskin-derived hDIAS cells, as evident by increases in glycosaminoglycan and collagen contents. More robust Alcian blue staining and homogeneous cell populations were also observed compared to controls. Human DIAS cells elicited no adverse host responses, reacted positively to chondrogenic regimens, and possessed multi-lineage differentiation potential with the caveat that efficacy may differ by anatomical origin of the skin. Taken together, these results suggest that hDIAS cells hold promise as a potential cell source for a number of tissue engineering applications.

  4. The experimental study of genetic engineering human neural stem cells mediated by lentivirus to express multigene

    Institute of Scientific and Technical Information of China (English)

    CAI Pei-qiang; TANG Xun; LIN Yue-qiu; Oudega Martin; SUN Guang-yun; XU Lin; YANG Yun-kang; ZHOU Tian-hua

    2006-01-01

    Objective:To explore the feasibility to construct genetic engineering human neural stem cells (hNSCs)mediated by lentivirus to express multigene in order to provide a graft source for further studies of spinal cord injury (SCI).Methods: Human neural stem cells from the brain cortex of human abortus were isolated and cultured, then gene was modified by lentivirus to express both green fluorescence protein (GFP) and rat neurotrophin-3(NT-3); the transgenic expression was detected by the methods of fluorescence microscope, dorsal root ganglion of fetal rats and slot blot.Results: Genetic engineering hNSCs were successfully constructed. All of the genetic engineering hNSCs which expressed bright green fluorescence were observed under the fluorescence microscope. The conditioned medium of transgenic hNSCs could induce neurite flourishing outgrowth from dorsal root ganglion (DRG). The genetic engineering hNSCs expressed high level NT-3 which could be detected by using slot blot.Conclusions: Genetic engineering hNSCs mediated by lentivirus can be constructed to express multigene successfully.

  5. Optimal Configuration of Human Motion Tracking Systems: A Systems Engineering Approach

    Science.gov (United States)

    Henderson, Steve

    2005-01-01

    Human motion tracking systems represent a crucial technology in the area of modeling and simulation. These systems, which allow engineers to capture human motion for study or replication in virtual environments, have broad applications in several research disciplines including human engineering, robotics, and psychology. These systems are based on several sensing paradigms, including electro-magnetic, infrared, and visual recognition. Each of these paradigms requires specialized environments and hardware configurations to optimize performance of the human motion tracking system. Ideally, these systems are used in a laboratory or other facility that was designed to accommodate the particular sensing technology. For example, electromagnetic systems are highly vulnerable to interference from metallic objects, and should be used in a specialized lab free of metal components.

  6. Developing Novel Therapeutic Approaches in Small Cell Lung Carcinoma Using Genetically Engineered Mouse Models and Human Circulating Tumor Cells

    Science.gov (United States)

    2015-10-01

    Using Genetically Engineered Mouse Models and Human Circulating Tumor Cells PRINCIPAL INVESTIGATOR: Jeffrey Engelman MD PhD CONTRACTING...SUBTITLE Developiing Novel Therapeutic Approaches in Small Cell Lung 5a. CONTRACT NUMBER Carcinoma Using Genetically Engineered Mouse Models and 5b...biomarkers. 15. SUBJECT TERMS Small cell lung cancer (SCLC), Genetically engineered mouse model (GEMM), BH3 mimetic, TORC inhibitor, Apoptosis

  7. Immunohistochemical detection of active transforming growth factor-beta in situ using engineered tissue

    Science.gov (United States)

    Barcellos-Hoff, M. H.; Ehrhart, E. J.; Kalia, M.; Jirtle, R.; Flanders, K.; Tsang, M. L.; Chatterjee, A. (Principal Investigator)

    1995-01-01

    The biological activity of transforming growth factor-beta 1 (TGF-beta) is governed by dissociation from its latent complex. Immunohistochemical discrimination of active and latent TGF-beta could provide insight into TGF-beta activation in physiological and pathological processes. However, evaluation of immunoreactivity specificity in situ has been hindered by the lack of tissue in which TGF-beta status is known. To provide in situ analysis of antibodies to differentiate between these functional forms, we used xenografts of human tumor cells modified by transfection to overexpress latent TGF-beta or constitutively active TGF-beta. This comparison revealed that, whereas most antibodies did not differentiate between TGF-beta activation status, the immunoreactivity of some antibodies was activation dependent. Two widely used peptide antibodies to the amino-terminus of TGF-beta, LC(1-30) and CC(1-30) showed marked preferential immunoreactivity with active TGF-beta versus latent TGF-beta in cryosections. However, in formalin-fixed, paraffin-embedded tissue, discrimination of active TGF-beta by CC(1-30) was lost and immunoreactivity was distinctly extracellular, as previously reported for this antibody. Similar processing-dependent extracellular localization was found with a neutralizing antibody raised to recombinant TGF-beta. Antigen retrieval recovered cell-associated immunoreactivity of both antibodies. Two antibodies to peptides 78-109 showed mild to moderate preferential immunoreactivity with active TGF-beta only in paraffin sections. LC(1-30) was the only antibody tested that discriminated active from latent TGF-beta in both frozen and paraffin-embedded tissue. Thus, in situ discrimination of active versus latent TGF-beta depends on both the antibody and tissue preparation. We propose that tissues engineered to express a specific form of a given protein provide a physiological setting in which to evaluate antibody reactivity with specific functional forms of a

  8. 77 FR 3500 - VTECH Communications, Inc., Human Factors Department, Beaverton, OR; Amended Certification...

    Science.gov (United States)

    2012-01-24

    ... Communications, Inc., Human Factors Department, Beaverton, OR; Amended Certification Regarding Eligibility To... the subject firm should read VTech Communications, Inc., Human Factors Department, Beaverton, Oregon... VTech Communications, Inc., Human Factors Department, Beaverton, Oregon. The intent of the...

  9. A HUMAN FACTORS META MODEL FOR U.S. NUCLEAR POWER PLANT CONTROL ROOM MODERNIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Joe, Jeffrey C.

    2017-03-01

    Over the last several years, the United States (U.S.) Department of Energy (DOE) has sponsored human factors research and development (R&D) and human factors engineering (HFE) activities through its Light Water Reactor Sustainability (LWRS) program to modernize the main control rooms (MCR) of commercial nuclear power plants (NPP). Idaho National Laboratory (INL), in partnership with numerous commercial nuclear utilities, has conducted some of this R&D to enable the life extension of NPPs (i.e., provide the technical basis for the long-term reliability, productivity, safety, and security of U.S. NPPs). From these activities performed to date, a human factors meta model for U.S. NPP control room modernization can now be formulated. This paper discusses this emergent HFE meta model for NPP control room modernization, with the goal of providing an integrated high level roadmap and guidance on how to perform human factors R&D and HFE for those in the U.S. nuclear industry that are engaging in the process of upgrading their MCRs.

  10. Characterization of In Vitro Engineered Human Adipose Tissues: Relevant Adipokine Secretion and Impact of TNF-α.

    Science.gov (United States)

    Aubin, Kim; Safoine, Meryem; Proulx, Maryse; Audet-Casgrain, Marie-Alice; Côté, Jean-François; Têtu, Félix-André; Roy, Alphonse; Fradette, Julie

    2015-01-01

    Representative modelling of human adipose tissue functions is central to metabolic research. Tridimensional models able to recreate human adipogenesis in a physiological tissue-like context in vitro are still scarce. We describe the engineering of white adipose tissues reconstructed from their cultured adipose-derived stromal precursor cells. We hypothesize that these reconstructed tissues can recapitulate key functions of AT under basal and pro-inflammatory conditions. These tissues, featuring human adipocytes surrounded by stroma, were stable and metabolically active in long-term cultures (at least 11 weeks). Secretion of major adipokines and growth factors by the reconstructed tissues was determined and compared to media conditioned by human native fat explants. Interestingly, the secretory profiles of the reconstructed adipose tissues indicated an abundant production of leptin, PAI-1 and angiopoietin-1 proteins, while higher HGF levels were detected for the human fat explants. We next demonstrated the responsiveness of the tissues to the pro-inflammatory stimulus TNF-α, as reflected by modulation of MCP-1, NGF and HGF secretion, while VEGF and leptin protein expression did not vary. TNF-α exposure induced changes in gene expression for adipocyte metabolism-associated mRNAs such as SLC2A4, FASN and LIPE, as well as for genes implicated in NF-κB activation. Finally, this model was customized to feature adipocytes representative of progressive stages of differentiation, thereby allowing investigations using newly differentiated or more mature adipocytes. In conclusion, we produced tridimensional tissues engineered in vitro that are able to recapitulate key characteristics of subcutaneous white adipose tissue. These tissues are produced from human cells and their neo-synthesized matrix elements without exogenous or synthetic biomaterials. Therefore, they represent unique tools to investigate the effects of pharmacologically active products on human stromal cells

  11. Characterization of In Vitro Engineered Human Adipose Tissues: Relevant Adipokine Secretion and Impact of TNF-α

    Science.gov (United States)

    Aubin, Kim; Safoine, Meryem; Proulx, Maryse; Audet-Casgrain, Marie-Alice; Côté, Jean-François; Têtu, Félix-André; Roy, Alphonse; Fradette, Julie

    2015-01-01

    Representative modelling of human adipose tissue functions is central to metabolic research. Tridimensional models able to recreate human adipogenesis in a physiological tissue-like context in vitro are still scarce. We describe the engineering of white adipose tissues reconstructed from their cultured adipose-derived stromal precursor cells. We hypothesize that these reconstructed tissues can recapitulate key functions of AT under basal and pro-inflammatory conditions. These tissues, featuring human adipocytes surrounded by stroma, were stable and metabolically active in long-term cultures (at least 11 weeks). Secretion of major adipokines and growth factors by the reconstructed tissues was determined and compared to media conditioned by human native fat explants. Interestingly, the secretory profiles of the reconstructed adipose tissues indicated an abundant production of leptin, PAI-1 and angiopoietin-1 proteins, while higher HGF levels were detected for the human fat explants. We next demonstrated the responsiveness of the tissues to the pro-inflammatory stimulus TNF-α, as reflected by modulation of MCP-1, NGF and HGF secretion, while VEGF and leptin protein expression did not vary. TNF-α exposure induced changes in gene expression for adipocyte metabolism-associated mRNAs such as SLC2A4, FASN and LIPE, as well as for genes implicated in NF-κB activation. Finally, this model was customized to feature adipocytes representative of progressive stages of differentiation, thereby allowing investigations using newly differentiated or more mature adipocytes. In conclusion, we produced tridimensional tissues engineered in vitro that are able to recapitulate key characteristics of subcutaneous white adipose tissue. These tissues are produced from human cells and their neo-synthesized matrix elements without exogenous or synthetic biomaterials. Therefore, they represent unique tools to investigate the effects of pharmacologically active products on human stromal cells

  12. Human amniotic fluid derived cells can competently substitute dermal fibroblasts in a tissue-engineered dermo-epidermal skin analog

    NARCIS (Netherlands)

    Hartmann-Fritsch, Fabienne; Hosper, Nynke; Luginbuehl, Joachim; Biedermann, Thomas; Reichmann, Ernst; Meuli, Martin

    Human amniotic fluid comprises cells with high differentiation capacity, thus representing a potential cell source for skin tissue engineering. In this experimental study, we investigated the ability of human amniotic fluid derived cells to substitute dermal fibroblasts and support epidermis

  13. The quality of engineering education is a key factor in development

    Directory of Open Access Journals (Sweden)

    Julio César Cañón Rodríguez

    2011-10-01

    Full Text Available The whole world is concerned about the quality of engineers’ education. The ideas regarding engineers’ social responsibility, scientific and technological updating and their professional commitment, along with the expectations of the society to which they belong, are conceived from the classroom and, consequently, should become the essence of curriculum design and therefore the raison d'être of teaching commitment. The magnitude of teaching commitment in engineering causes particular concern for higher education institutions and accompaniment regarding their teachers’ tasks. The quality of engineering curricula significantly depends on the quality of the teaching offered in them and, consequently, teachers’ qualifications and recognition of their importance have become key factors in curriculum management and compliance with commitments as stated in mission statements. Research involving around a thousand engineering professors in Colombia led to identifying the main features of the three fundamental moments regarding their teaching role; this, in turn, led to characterising teachers’ role in ensuring that improvement plans are carried out, resulting from engineering programme accreditation (i.e. making them accountable to society. The future of engineering training requires a major transformation regarding the task of teaching. The conventional image of teachers must provide for the concept of teacher programmes and simple compliance with curriculum guidelines must give way to initiatives and proposals promoting a teacher’s role as a vital/dynamic element in the classroom.

  14. Sequential use of human-derived medium supplements favours cardiovascular tissue engineering

    NARCIS (Netherlands)

    Vis, Paul W. Riem; Sluijter, Joost P. G.; Soekhradj-Soechit, R. Sarita; van Herwerden, Lex A.; Kluin, Jolanda; Bouten, Carlijn V. C.

    2012-01-01

    For clinical application of tissue engineering strategies, the use of animal-derived serum in culture medium is not recommended, because it can evoke immune responses in patients. We previously observed that human platelet-lysate (PL) is favourable for cell expansion, but generates weaker tissue as

  15. Sequential use of human-derived medium supplements favours cardiovascular tissue engineering

    NARCIS (Netherlands)

    Vis, Paul W. Riem; Sluijter, Joost P. G.; Soekhradj-Soechit, R. Sarita; van Herwerden, Lex A.; Kluin, Jolanda; Bouten, Carlijn V. C.

    2012-01-01

    For clinical application of tissue engineering strategies, the use of animal-derived serum in culture medium is not recommended, because it can evoke immune responses in patients. We previously observed that human platelet-lysate (PL) is favourable for cell expansion, but generates weaker tissue as

  16. A search engine for retrieval and inspection of events with 48 human actions in realistic videos

    NARCIS (Netherlands)

    Burghouts, G.J.; Penning, H.L.H. de; Hove, R.J.M. ten; Landsmeer, S.; Broek, S.P. van den; Hollander, R.J.M.; Hanckmann, P.; Kruithof, M.C.; Leeuwen, C.J. van; Korzec, S.; Bouma, H.; Schutte, K.

    2013-01-01

    The contribution of this paper is a search engine that recognizes and describes 48 human actions in realistic videos. The core algorithms have been published recently, from the early visual processing (Bouma, 2012), discriminative recognition (Burghouts, 2012) and textual description (Hankmann, 2012

  17. Comparative DNA damage and transcriptomic effects of engineered nanoparticles in human lung cells in vitro

    Science.gov (United States)

    A series of six titanium dioxide and two cerium oxide engineered nanomaterials were assessed for their ability to induce cytotoxicity, reactive oxygen species (ROS), various types of DNA damage, and transcriptional changes in human respiratory BEAS-2B cells exposed in vitro at se...

  18. Automotive Technology and Human Factors Research: Past, Present, and Future

    Directory of Open Access Journals (Sweden)

    Motoyuki Akamatsu

    2013-01-01

    Full Text Available This paper reviews the history of automotive technology development and human factors research, largely by decade, since the inception of the automobile. The human factors aspects were classified into primary driving task aspects (controls, displays, and visibility, driver workspace (seating and packaging, vibration, comfort, and climate, driver’s condition (fatigue and impairment, crash injury, advanced driver-assistance systems, external communication access, and driving behavior. For each era, the paper describes the SAE and ISO standards developed, the major organizations and conferences established, the major news stories affecting vehicle safety, and the general social context. The paper ends with a discussion of what can be learned from this historical review and the major issues to be addressed. A major contribution of this paper is more than 180 references that represent the foundation of automotive human factors, which should be considered core knowledge and should be familiar to those in the profession.

  19. Addressing the human factors issues associated with control room modifications

    Energy Technology Data Exchange (ETDEWEB)

    O`Hara, J.; Stubler, W. [Brookhaven National Lab., Upton, NY (United States). Dept. of Advanced Technology; Kramer, J. [Nuclear Regulatory Commission, Washington, DC (United States). Office of Nuclear Regulatory Research

    1998-03-01

    Advanced human-system interface (HSI) technology is being integrated into existing nuclear plants as part of plant modifications and upgrades. The result of this trend is that hybrid HSIs are created, i.e., HSIs containing a mixture of conventional (analog) and advanced (digital) technology. The purpose of the present research is to define the potential effects of hybrid HSIs on personnel performance and plant safety and to develop human factors guidance for safety reviews of them where necessary. In support of this objective, human factors issues associated with hybrid HSIs were identified. The issues were evaluated for their potential significance to plant safety, i.e., their human performance concerns have the potential to compromise plant safety. The issues were then prioritized and a subset was selected for design review guidance development.

  20. Soluble CD54 induces human endothelial cells ex vivo expansion useful for cardiovascular regeneration and tissue engineering application

    KAUST Repository

    Malara, N.M.

    2015-03-01

    Aim: Consistent expansion of primary human endothelial cells in vitro is critical in the development of engineered tissue. A variety of complex culture media and techniques developed from different basal media have been reported with alternate success. Incongruous results are further confounded by donor-to-donor variability and cellular source of derivation. Our results demonstrate how to overcome these limitations using soluble CD54 (sCD54) as additive to conventional culture medium. Methods and results: Isolated primary fragment of different vessel types was expanded in Ham\\'s F12 DMEM, enriched with growth factors, Fetal Calf Serum and conditioned medium of Human Umbilical Vein Endothelial Cells (HUVEC) collected at different passages. Cytokine content of culture media was analyzed in order to identify the soluble factors correlating with better proliferation profile. sCD54 was found to induce the in vitro expansion of human endothelial cells (HECs) independently from the vessels source and even in the absence of HUVEC-conditioned medium. The HECs cultivated in the presence of sCD54 (50 ng/ml), resulted positive for the expression of CD146 and negative for CD45, and lower fibroblast contamination. Cells were capable to proliferate with an S phase of 25%, to produce vascular endothelial growth factor, VEGF, (10 ng/ml) and to give origin to vessel-like tubule in vitro. Conclusion: Our results demonstrate that sCD54 is an essential factor for the in-vitro expansion of HECs without donor and vessel-source variability. Resulting primary cultures can be useful, for tissue engineering in regenerative medicine (e.g. artificial micro tissue generation, coating artificial heart valve etc.) and bio-nanotechnology applications. © 2015 The Authors. Published by Elsevier Ireland Ltd.

  1. Human Pluripotent Stem Cell Mechanobiology: Manipulating the Biophysical Microenvironment for Regenerative Medicine and Tissue Engineering Applications.

    Science.gov (United States)

    Ireland, Ronald G; Simmons, Craig A

    2015-11-01

    A stem cell in its microenvironment is subjected to a myriad of soluble chemical cues and mechanical forces that act in concert to orchestrate cell fate. Intuitively, many of these soluble and biophysical factors have been the focus of intense study to successfully influence and direct cell differentiation in vitro. Human pluripotent stem cells (hPSCs) have been of considerable interest in these studies due to their great promise for regenerative medicine. Culturing and directing differentiation of hPSCs, however, is currently extremely labor-intensive and lacks the efficiency required to generate large populations of clinical-grade cells. Improved efficiency may come from efforts to understand how the cell biophysical signals can complement biochemical signals to regulate cell pluripotency and direct differentiation. In this concise review, we explore hPSC mechanobiology and how the hPSC biophysical microenvironment can be manipulated to maintain and differentiate hPSCs into functional cell types for regenerative medicine and tissue engineering applications.

  2. Human Error Assessment and Reduction Technique (HEART) and Human Factor Analysis and Classification System (HFACS)

    Science.gov (United States)

    Alexander, Tiffaney Miller

    2017-01-01

    Research results have shown that more than half of aviation, aerospace and aeronautics mishaps incidents are attributed to human error. As a part of Quality within space exploration ground processing operations, the identification and or classification of underlying contributors and causes of human error must be identified, in order to manage human error.This presentation will provide a framework and methodology using the Human Error Assessment and Reduction Technique (HEART) and Human Factor Analysis and Classification System (HFACS), as an analysis tool to identify contributing factors, their impact on human error events, and predict the Human Error probabilities (HEPs) of future occurrences. This research methodology was applied (retrospectively) to six (6) NASA ground processing operations scenarios and thirty (30) years of Launch Vehicle related mishap data. This modifiable framework can be used and followed by other space and similar complex operations.

  3. NASA Space Flight Human-System Standard Human Factors, Habitability, and Environmental Health

    Science.gov (United States)

    Holubec, Keith; Connolly, Janis

    2010-01-01

    This slide presentation reviews the history, and development of NASA-STD-3001, NASA Space Flight Human-System Standard Human Factors, Habitability, and Environmental Health, and the related Human Integration Design Handbook. Currently being developed from NASA-STD-3000, this project standard currently in review will be available in two volumes, (i.e., Volume 1 -- VCrew Health and Volume 2 -- Human Factors, Habitability, and Environmental Health) and the handbook will be both available as a pdf file and as a interactive website.

  4. Genetic engineering of human embryonic stem cells with lentiviral vectors.

    Science.gov (United States)

    Xiong, Chen; Tang, Dong-Qi; Xie, Chang-Qing; Zhang, Li; Xu, Ke-Feng; Thompson, Winston E; Chou, Wayne; Gibbons, Gary H; Chang, Lung-Ji; Yang, Li-Jun; Chen, Yuqing E

    2005-08-01

    Human embryonic stem (hES) cells present a valuable source of cells with a vast therapeutic potential. However, the low efficiency of directed differentiation of hES cells remains a major obstacle in their uses for regenerative medicine. While differentiation may be controlled by the genetic manipulation, effective and efficient gene transfer into hES cells has been an elusive goal. Here, we show stable and efficient genetic manipulations of hES cells using lentiviral vectors. This method resulted in the establishment of stable gene expression without loss of pluripotency in hES cells. In addition, lentiviral vectors were effective in conveying the expression of an U6 promoter-driven small interfering RNA (siRNA), which was effective in silencing its specific target. Taken together, our results suggest that lentiviral gene delivery holds great promise for hES cell research and application.

  5. Safe Operation of Nuclear Power Plants: Impacts of Human and Organisational Factors and Emerging Technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    In co-operation with the OECD Nuclear Energy Agency (NEA), the Halden Reactor Project organised a Summer School on ''Safe Operation of Nuclear Power Plants: Impacts of Human and Organisational Factors and Emerging Technologies'' in the period August 27-August 31, 2001. The Summer School was intended for scientists, engineers and technicians working for nuclear installations, engineering companies, industry and members of universities and research institutes, who wanted to broaden their nuclear background by getting acquainted with Man-Technology-Organisation-related subjects and issues. The Summer School should also serve to transfer knowledge to the ''young generation'' in the nuclear field. The following presentations were given: (1) Overview of the Nuclear Community and Current issues, (2) The Elements of Safety Culture; Evaluation of Events, (3) Quality Management (QM), (4) Probabilistic Risk Assessment (PSA), (5) Human Behaviour from the Viewpoint of Industrial Psychology, (6) Technical tour of the Halden Project Experimental Facilities, (7) Human Factors in Control Room Design, (8) Computerised Operator Support Systems (COSSs) and (9) Artificial Intelligence; a new Approach. Most of the contributions are overhead figures from spoken lectures.

  6. Human factors in the management of the critically ill patient.

    Science.gov (United States)

    Bion, J F; Abrusci, T; Hibbert, P

    2010-07-01

    Unreliable delivery of best practice care is a major component of medical error. Critically ill patients are particularly susceptible to error and unreliable care. Human factors analysis, widely used in industry, provides insights into how interactions between organizations, tasks, and the individual worker impact on human behaviour and affect systems reliability. We adopt a human factors approach to examine determinants of clinical reliability in the management of critically ill patients. We conducted a narrative review based on a Medline search (1950-March 2010) combining intensive/critical care (units) with medical errors, patient safety, or delivery of healthcare; keyword and Internet search 'human factors' or 'ergonomics'. Critical illness represents a high-risk, complex system spanning speciality and geographical boundaries. Substantial opportunities exist for improving the safety and reliability of care of critically ill patients at the level of the task, the individual healthcare provider, and the organization or system. Task standardization (best practice guidelines) and simplification (bundling or checklists) should be implemented where scientific evidence is strong, or adopted subject to further research ('dynamic standardization'). Technical interventions should be embedded in everyday practice by the adjunctive use of non-technical (behavioural) interventions. These include executive 'adoption' of clinical areas, systematic methods for identifying hazards and reflective learning from error, and a range of techniques for improving teamworking and communication. Human factors analysis provides a useful framework for understanding and rectifying the causes of error and unreliability, particularly in complex systems such as critical care.

  7. Critical review on the physical and mechanical factors involved in tissue engineering of cartilage.

    Science.gov (United States)

    Gaut, Carrie; Sugaya, Kiminobu

    2015-01-01

    Articular cartilage defects often progress to osteoarthritis, which negatively impacts quality of life for millions of people worldwide and leads to high healthcare expenditures. Tissue engineering approaches to osteoarthritis have concentrated on proliferation and differentiation of stem cells by activation and suppression of signaling pathways, and by using a variety of scaffolding techniques. Recent studies indicate a key role of environmental factors in the differentiation of mesenchymal stem cells to mature cartilage-producing chondrocytes. Therapeutic approaches that consider environmental regulation could optimize chondrogenesis protocols for regeneration of articular cartilage. This review focuses on the effect of scaffold structure and composition, mechanical stress and hypoxia in modulating mesenchymal stem cell fate and the current use of these environmental factors in tissue engineering research.

  8. Engineering-Geological Maps of Geological Factors of the Environment in Slovakia

    Science.gov (United States)

    Baliak, František; Brček, Martin

    2013-03-01

    In recent years, we have witnessed very frequent natural disasters such as earthquakes, floods, landslides, storms and similar. In most cases, disasters are caused by geological factors, especially geobarriers. Geobarriers threaten the life and works of man or reduce the effectiveness of the construction and operation of technical works, or harm the environment by negative anthropogenic influences. An important task in assessing the technical and environmental aspects of particular engineering activity is to assess the impact of constructions on the production and protection of the environment. The important part of the environment is the geological environment. In this paper, we give an overview of geological factors of the environment and the way how they are illustrated in the engineering-geological maps made in Slovakia.

  9. Human Engineered Cardiac Tissues Created Using Induced Pluripotent Stem Cells Reveal Functional Characteristics of BRAF-Mediated Hypertrophic Cardiomyopathy.

    Directory of Open Access Journals (Sweden)

    Timothy J Cashman

    Full Text Available Hypertrophic cardiomyopathy (HCM is a leading cause of sudden cardiac death that often goes undetected in the general population. HCM is also prevalent in patients with cardio-facio-cutaneous syndrome (CFCS, which is a genetic disorder characterized by aberrant signaling in the RAS/MAPK signaling cascade. Understanding the mechanisms of HCM development in such RASopathies may lead to novel therapeutic strategies, but relevant experimental models of the human condition are lacking. Therefore, the objective of this study was to develop the first 3D human engineered cardiac tissue (hECT model of HCM. The hECTs were created using human cardiomyocytes obtained by directed differentiation of induced pluripotent stem cells derived from a patient with CFCS due to an activating BRAF mutation. The mutant myocytes were directly conjugated at a 3:1 ratio with a stromal cell population to create a tissue of defined composition. Compared to healthy patient control hECTs, BRAF-hECTs displayed a hypertrophic phenotype by culture day 6, with significantly increased tissue size, twitch force, and atrial natriuretic peptide (ANP gene expression. Twitch characteristics reflected increased contraction and relaxation rates and shorter twitch duration in BRAF-hECTs, which also had a significantly higher maximum capture rate and lower excitation threshold during electrical pacing, consistent with a more arrhythmogenic substrate. By culture day 11, twitch force was no longer different between BRAF and wild-type hECTs, revealing a temporal aspect of disease modeling with tissue engineering. Principal component analysis identified diastolic force as a key factor that changed from day 6 to day 11, supported by a higher passive stiffness in day 11 BRAF-hECTs. In summary, human engineered cardiac tissues created from BRAF mutant cells recapitulated, for the first time, key aspects of the HCM phenotype, offering a new in vitro model for studying intrinsic mechanisms and

  10. Human factors evaluation of teletherapy: Literature review. Volume 5

    Energy Technology Data Exchange (ETDEWEB)

    Henriksen, K.; Kaye, R.D.; Jones, R. [Hughes Training, Inc., Falls Church, VA (United States); Morisseau, D.S.; Serig, D.L. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Systems Technology

    1995-07-01

    A series of human factors evaluations were undertaken to better understand the contributing factors to human error in the teletherapy environment. Teletherapy is a multidisciplinary methodology for treating cancerous tissue through selective exposure to an external beam of ionizing radiation. A team of human factors specialists, assisted by a panel of radiation oncologists, medical physicists, and radiation therapists, conducted site visits to radiation oncology departments at community hospitals, university centers, and free-standing clinics. A function and task analysis was performed initially to guide subsequent evaluations in the areas of workplace environment, system-user interfaces, procedures, training, and organizational practices. To further acquire an in-depth and up-to-date understanding of the practice of teletherapy in support of these evaluations, a systematic literature review was conducted. Factors that have a potential impact on the accuracy of treatment delivery were of primary concern. The present volume is the literature review. The volume starts with an overview of the multiphased nature of teletherapy, and then examines the requirement for precision, the increasing role of quality assurance, current conceptualizations of human error, and the role of system factors such as the workplace environment, user-system interfaces, procedures, training, and organizational practices.

  11. Interaction of Psychological Factors in Shaping Entrepreneurial Intention Among Computer and Electrical Engineering Students

    OpenAIRE

    Liang, Chao-Tung; Lee, Jia-Ling; Liang, Chaoyun

    2015-01-01

    Numerous technopreneurs start their ventures at college age, but the entrepreneurship of computer and electrical engineering (CEE) students remains under-studied. This study analysed both the combined and interactive effects of psychological factors on the entrepreneurial intentions of CEE students. In this study, entrepreneurial intention comprised two dimensions, conviction and preparation. Regarding the direct effects, the results indicated that self-efficacy affected entrepreneurial convi...

  12. Human factors/ergonomics as a systems discipline? "The human use of human beings" revisited.

    Science.gov (United States)

    Hollnagel, Erik

    2014-01-01

    Discussions of the possible future of Human factors/ergonomics (HFE) usually take the past for granted in the sense that the future of HFE is assumed to be more of the same. This paper argues that the nature of work in the early 2010s is so different from the nature of work when HFE was formulated 60-70 years ago that a critical reassessment of the basis for HFE is needed. If HFE should be a systems discipline, it should be a soft systems rather than a hard systems discipline. It is not enough for HFE to seek to improve performance and well-being through systems design, since any change to the work environment in principle alters the very basis for the change. Instead HFE should try to anticipate how the nature of work will change so that it can both foresee what work will be and propose what work should be.

  13. Comparative genomics of human stem cell factor (SCF

    Directory of Open Access Journals (Sweden)

    Moein Dehbashi

    2017-03-01

    Full Text Available Stem cell factor (SCF is a critical protein with key roles in the cell such as hematopoiesis, gametogenesis and melanogenesis. In the present study a comparative analysis on nucleotide sequences of SCF was performed in Humanoids using bioinformatics tools including NCBI-BLAST, MEGA6, and JBrowse. Our analysis of nucleotide sequences to find closely evolved organisms with high similarity by NCBI-BLAST tools and MEGA6 showed that human and Chimpanzee (Pan troglodytes were placed into the same cluster. By using JBrowse, we found that SCF in Neanderthal had a single copy number similar to modern human and partly conserved nucleotide sequences. Together, the results approved the gene flow and genetics similarity of SCF among human and P. troglodytes. This may suggest that during evolution, SCF gene transferred partly intact either on the basis of sequence or function from the same ancestors to P. troglodytes, the ancient human like Neanderthal, and then to the modern human.

  14. Revolutions and shifting paradigms in human factors & ergonomics.

    Science.gov (United States)

    Boff, Kenneth R

    2006-07-01

    The "Revolution in Information Technology" has spawned a series of transformational revolutions in the nature and practice of human factors and ergonomics (HFE). "Generation 1" HFE evolved with a focus on adapting equipment, workplace and tasks to human capabilities and limitations. Generation 2, focused on cognitive systems integration, arose in response to the need to manage automation and dynamic function allocation. Generation 3 is focused on symbiotic technologies that can amplify human physical and cognitive capabilities. Generation 4 is emergent and is focused on biological enhancement of physical or cognitive capabilities. The shift from HFE Generations 1 and 2 to Generations 3 and 4 profoundly alters accepted boundary constraints on the adaptability of humans in complex systems design. Furthermore, it has opened an ethical divide between those that see cognitive and physical enhancement as a great benefit to society and those who perceive this as tampering with the fundamentals of human nature.

  15. Klotho is a serum factor related to human aging

    Institute of Scientific and Technical Information of China (English)

    肖能明; 张焱明; 郑权; 顾军

    2004-01-01

    Background Does klotho (KL) protein exist in human serum, and is there any correlation between KL protein in serum with human aging? In order to answer those questions, we identified KL protein in human serum and established the correlation between KL protein in human serum and aging.Methods We prepared a polyclonal antibody against human KL protein that was able to recognize the C-terminal of human secreted KL protein. Western blot and enzyme-linked immunosorbent assay (ELISA) were used to identify KL protein in human serum.Results In Western blot, the antibody specifically recognized a 60-kD KL protein in both human and mice serum. The population aged from 0 to 91 years screened by ELISA revealed that the level of serum KL declined while age increased, though each individual level was variable and that the trend of decreasing in serum KL had no difference in sex.Conclusion Our data suggest that KL is a serum factor related to human aging.

  16. Scaffolds for Growth Factor Delivery as Applied to Bone Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Keith A. Blackwood

    2012-01-01

    Full Text Available There remains a substantial shortfall in the treatment of severe skeletal injuries. The current gold standard of autologous bone grafting from the same patient has many undesirable side effects associated such as donor site morbidity. Tissue engineering seeks to offer a solution to this problem. The primary requirements for tissue-engineered scaffolds have already been well established, and many materials, such as polyesters, present themselves as potential candidates for bone defects; they have comparable structural features, but they often lack the required osteoconductivity to promote adequate bone regeneration. By combining these materials with biological growth factors, which promote the infiltration of cells into the scaffold as well as the differentiation into the specific cell and tissue type, it is possible to increase the formation of new bone. However due to the cost and potential complications associated with growth factors, controlling the rate of release is an important design consideration when developing new bone tissue engineering strategies. This paper will cover recent research in the area of encapsulation and release of growth factors within a variety of different polymeric scaffolds.

  17. Molecular basis of engineered meganuclease targeting of the endogenous human RAG1 locus.

    Science.gov (United States)

    Muñoz, Inés G; Prieto, Jesús; Subramanian, Sunita; Coloma, Javier; Redondo, Pilar; Villate, Maider; Merino, Nekane; Marenchino, Marco; D'Abramo, Marco; Gervasio, Francesco L; Grizot, Sylvestre; Daboussi, Fayza; Smith, Julianne; Chion-Sotinel, Isabelle; Pâques, Frédéric; Duchateau, Philippe; Alibés, Andreu; Stricher, François; Serrano, Luis; Blanco, Francisco J; Montoya, Guillermo

    2011-01-01

    Homing endonucleases recognize long target DNA sequences generating an accurate double-strand break that promotes gene targeting through homologous recombination. We have modified the homodimeric I-CreI endonuclease through protein engineering to target a specific DNA sequence within the human RAG1 gene. Mutations in RAG1 produce severe combined immunodeficiency (SCID), a monogenic disease leading to defective immune response in the individuals, leaving them vulnerable to infectious diseases. The structures of two engineered heterodimeric variants and one single-chain variant of I-CreI, in complex with a 24-bp oligonucleotide of the human RAG1 gene sequence, show how the DNA binding is achieved through interactions in the major groove. In addition, the introduction of the G19S mutation in the neighborhood of the catalytic site lowers the reaction energy barrier for DNA cleavage without compromising DNA recognition. Gene-targeting experiments in human cell lines show that the designed single-chain molecule preserves its in vivo activity with higher specificity, further enhanced by the G19S mutation. This is the first time that an engineered meganuclease variant targets the human RAG1 locus by stimulating homologous recombination in human cell lines up to 265 bp away from the cleavage site. Our analysis illustrates the key features for à la carte procedure in protein-DNA recognition design, opening new possibilities for SCID patients whose illness can be treated ex vivo.

  18. With eloquence and humanity? Human factors/ergonomics in sustainable human development.

    Science.gov (United States)

    Moore, Dave; Barnard, Tim

    2012-12-01

    This article is based on a keynote presentation given at the 18th Congress of the International Ergonomics Association in Recife, Brazil, February 2012. It considers new, and not so new, approaches and practical roles for the emerging field of human factors/ergonomics (HFE) in sustainable development (SD).The material for this article was largely drawn from the literature in the fields of human development, sustainability, climate change mitigation and adaptation, and social/environmental impact assessment. Identifying the role of HFE in SD is not a simple one and from the outset is complicated by the widely differing ideas in the sustainability literature about what exactly it is we are hoping to sustain. Is it individual companies, business models, cultures, or the carrying capacity of our planet? Or combinations of these? For the purposes of this article, certain assumptions are made, and various emerging opportunities and responsibilities associated with our changing world of work are introduced. First, there are new versions of traditional tasks for us, such as working with the people and companies in the renewable energy sectors. Beyond this, however, it is suggested that there are emerging roles for HFE professionals in transdisciplinary work where we might play our part, for example, in tackling the twinned issues of climate change and human development in areas of significant poverty. In particular we have the tools and capabilities to help define and measure what groups have reason to value, and wish to sustain. It is suggested, that to do this effectively, however, will require a philosophical shift, or perhaps just a philosophical restatement at a collective level, regarding who and what we ultimately serve.

  19. Cross-cultural Human-Machine-Systems: selected aspects of a cross-cultural system engineering; Interkulturelle Mensch-Maschine-Systeme: ausgewaehlte Aspekte einer interkulturellen Systemgestaltung

    Energy Technology Data Exchange (ETDEWEB)

    Roese, K. [Technische Univ. Kaiserslautern (Germany). AG Nutzergerechte Produktentwicklung

    2006-07-01

    Cross-cultural Human-Machine-Systems are one key factor for success in the global market era. Nowadays the machine producer have to offer their products worldwide. With the export to other nations they have to consider on the user behaviour in these other cultures. The analysis of cross-cultural user requirements and their integration into the product development process is a real chance to cape with these challenge. This paper describe two aspects of cross-cultural user aspects. It gives an impression of the complex and sometimes unknown cultural influencing factors and their impact on Human-Machine-System-Engineering. (orig.)

  20. SafetyNet. Human factors safety training on the Internet

    DEFF Research Database (Denmark)

    Hauland, G.; Pedrali, M.

    2002-01-01

    This report describes user requirements to an Internet based distance learning system of human factors training, i.e. the SafetyNet prototype, within the aviation (pilots and air traffic control), maritime and medical domains. User requirements totraining have been elicited through 19 semi...

  1. Human Factors Evaluation of Advanced Electric Power Grid Visualization Tools

    Energy Technology Data Exchange (ETDEWEB)

    Greitzer, Frank L.; Dauenhauer, Peter M.; Wierks, Tamara G.; Podmore, Robin

    2009-04-01

    This report describes initial human factors evaluation of four visualization tools (Graphical Contingency Analysis, Force Directed Graphs, Phasor State Estimator and Mode Meter/ Mode Shapes) developed by PNNL, and proposed test plans that may be implemented to evaluate their utility in scenario-based experiments.

  2. Neuroscience in ergonomics and human factors research and practice

    NARCIS (Netherlands)

    Erp, J.B.F. van; Brouwer, A.M.

    2013-01-01

    This article explores the possible application of neuroscientific knowledge in human factors research and pratice. Can this knowledge be implemented to improve the design and evaluation of systems and functional environments? Or - to take it one step further - could it bring about the integration of

  3. Human factors in organizational design and management VI

    NARCIS (Netherlands)

    Vink, P.; Koningsveld, E.A.P.; Dhondt, S.

    1998-01-01

    This book contains proceedings of the Sixth International Symposium on Human Factors in Organizational Design and Management held in The Hague, The Netherlands, August 19-22, 1998. The Symposium was sponsored jointly by the International Ergonomics Society, the Dutch Ergonomics Society, NIA TNO and

  4. Human factors issues of tactice displays for military environments

    NARCIS (Netherlands)

    Erp, J.B.F. van; Self, B.P.

    2008-01-01

    The overall goal of this chapter is to give the reader insights into the human factors issues related to the use of tactile displays. Torso-mounted displays, which are particularly suited for direction and orientation cues, are emphasized. First, perceptual issues relevant to tactile stimulation are

  5. Human factors in organizational design and management VI

    NARCIS (Netherlands)

    Vink, P.; Koningsveld, E.A.P.; Dhondt, S.

    1998-01-01

    This book contains proceedings of the Sixth International Symposium on Human Factors in Organizational Design and Management held in The Hague, The Netherlands, August 19-22, 1998. The Symposium was sponsored jointly by the International Ergonomics Society, the Dutch Ergonomics Society, NIA TNO and

  6. Human intrinsic factor expressed in the plant Arabidopsis thaliana

    DEFF Research Database (Denmark)

    Fedosov, Sergey N; Laursen, Niels B; Nexø, Ebba

    2003-01-01

    Intrinsic factor (IF) is the gastric protein that promotes the intestinal uptake of vitamin B12. Gastric IF from animal sources is used in diagnostic tests and in vitamin pills. However, administration of animal IF to humans becomes disadvantageous because of possible pathogenic transmission...

  7. Immunolocalization of transforming growth factor alpha in normal human tissues

    DEFF Research Database (Denmark)

    Christensen, M E; Poulsen, Steen Seier

    1996-01-01

    the distribution of the growth factor in a broad spectrum of normal human tissues. Indirect immunoenzymatic staining methods were used. The polypeptide was detected with a polyclonal as well as a monoclonal antibody. The polyclonal and monoclonal antibodies demonstrated almost identical immunoreactivity. TGF...

  8. Cartilage tissue engineering: Role of mesenchymal stem cells along with growth factors & scaffolds

    Directory of Open Access Journals (Sweden)

    M B Gugjoo

    2016-01-01

    Full Text Available Articular cartilage injury poses a major challenge for both the patient and orthopaedician. Articular cartilage defects once formed do not regenerate spontaneously, rather replaced by fibrocartilage which is weaker in mechanical competence than the normal hyaline cartilage. Mesenchymal stem cells (MSCs along with different growth factors and scaffolds are currently incorporated in tissue engineering to overcome the deficiencies associated with currently available surgical methods and to facilitate cartilage healing. MSCs, being readily available with a potential to differentiate into chondrocytes which are enhanced by the application of different growth factors, are considered for effective repair of articular cartilage after injury. However, therapeutic application of MSCs and growth factors for cartilage repair remains in its infancy, with no comparative clinical study to that of the other surgical techniques. The present review covers the role of MSCs, growth factors and scaffolds for the repair of articular cartilage injury.

  9. (*) Central Growth Factor Loaded Depots in Bone Tissue Engineering Scaffolds for Enhanced Cell Attraction.

    Science.gov (United States)

    Quade, Mandy; Knaack, Sven; Akkineni, Ashwini Rahul; Gabrielyan, Anastasia; Lode, Anja; Rösen-Wolff, Angela; Gelinsky, Michael

    2017-08-01

    Tissue engineering, the application of stem and progenitor cells in combination with an engineered extracellular matrix, is a promising strategy for bone regeneration. However, its success is limited by the lack of vascularization after implantation. The concept of in situ tissue engineering envisages the recruitment of cells necessary for tissue regeneration from the host environment foregoing ex vivo cell seeding of the scaffold. In this study, we developed a novel scaffold system for enhanced cell attraction, which is based on biomimetic mineralized collagen scaffolds equipped with a central biopolymer depot loaded with chemotactic agents. In humid milieu, as after implantation, the signaling factors are expected to slowly diffuse out of the central depot forming a gradient that stimulates directed cell migration toward the scaffold center. Heparin, hyaluronic acid, and alginate have been shown to be capable of depot formation. By using vascular endothelial growth factor (VEGF) as model factor, it was demonstrated that the release kinetics can be adjusted by varying the depot composition. While alginate and hyaluronic acid are able to reduce the initial burst and prolong the release of VEGF, the addition of heparin led to a much stronger retention that resulted in an almost linear release over 28 days. The biological activity of released VEGF was proven for all variants using an endothelial cell proliferation assay. Furthermore, migration experiments with endothelial cells revealed a relationship between the degree of VEGF retention and migration distance: cells invaded deepest in scaffolds containing a heparin-based depot indicating that the formation of a steep gradient is crucial for cell attraction. In conclusion, this novel in situ tissue engineering approach, specifically designed to recruit and accommodate endogenous cells upon implantation, appeared highly promising to stimulate cell invasion, which in turn would promote vascularization and finally new

  10. Engineering Technical Review Planning Briefing

    Science.gov (United States)

    Gardner, Terrie

    2012-01-01

    The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

  11. A Keyword Analysis for Human Resource Management Factors

    Directory of Open Access Journals (Sweden)

    Muhammed Kürşad ÖZLEN

    2014-05-01

    Full Text Available With the constant increasing in technology and education, with development of multinational corporations and frequent changes in economic status and structures, Human Resources become the most crucial, the most reliable and necessary department. Moreover, in many companies, Human Resource Department is the most important department. The main purpose of this research is to mark off top rated factors related with Human Resource Management by analyzing all the abstracts of the published papers of a Human Resource Management journal for the period between the first issue of 2005 and the first issue of 2013. We identified the most frequent categories of the articles during this analyzed period. The literature is reviewed according to the identified factors related to Human Resource Management. If the keywords about Human Resources (35,7 % is not considered, it is observed that the researches, for the selected period, have organizational approach (39,2 % (Management, organizational strategy, organizational performance, organizational culture, contextual issues, technical issues and location and from the individual approach (24,4 % (Individual performance, training and education, employee rights, and behavioral issues. Furthermore, it is also observed that the researchers (a mainly give importance to the practice more than the theory and (b consider the organization more than the individual.

  12. APPLICATION OF EYE TRACKING FOR MEASUREMENT AND EVALUATION IN HUMAN FACTORS STUDIES IN CONTROL ROOM MODERNIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Kovesdi, C.; Spielman, Z.; LeBlanc, K.; Rice, B.

    2017-05-01

    An important element of human factors engineering (HFE) pertains to measurement and evaluation (M&E). The role of HFE-M&E should be integrated throughout the entire control room modernization (CRM) process and be used for human-system performance evaluation and diagnostic purposes with resolving potential human engineering deficiencies (HEDs) and other human machine interface (HMI) design issues. NUREG-0711 describes how HFE in CRM should employ a hierarchical set of measures, particularly during integrated system validation (ISV), including plant performance, personnel task performance, situation awareness, cognitive workload, and anthropometric/ physiological factors. Historically, subjective measures have been primarily used since they are easier to collect and do not require specialized equipment. However, there are pitfalls with relying solely on subjective measures in M&E such that negatively impact reliability, sensitivity, and objectivity. As part of comprehensively capturing a diverse set of measures that strengthen findings and inferences made of the benefits from emerging technologies like advanced displays, this paper discusses the value of using eye tracking as an objective method that can be used in M&E. A brief description of eye tracking technology and relevant eye tracking measures is provided. Additionally, technical considerations and the unique challenges with using eye tracking in full-scaled simulations are addressed. Finally, this paper shares preliminary findings regarding the use of a wearable eye tracking system in a full-scale simulator study. These findings should help guide future full-scale simulator studies using eye tracking as a methodology to evaluate human-system performance.

  13. The case for applying tissue engineering methodologies to instruct human organoid morphogenesis.

    Science.gov (United States)

    Marti-Figueroa, Carlos R; Ashton, Randolph S

    2017-05-01

    Three-dimensional organoids derived from human pluripotent stem cell (hPSC) derivatives have become widely used in vitro models for studying development and disease. Their ability to recapitulate facets of normal human development during in vitro morphogenesis produces tissue structures with unprecedented biomimicry. Current organoid derivation protocols primarily rely on spontaneous morphogenesis processes to occur within 3-D spherical cell aggregates with minimal to no exogenous control. This yields organoids containing microscale regions of biomimetic tissues, but at the macroscale (i.e. 100's of microns to millimeters), the organoids' morphology, cytoarchitecture, and cellular composition are non-biomimetic and variable. The current lack of control over in vitro organoid morphogenesis at the microscale induces aberrations at the macroscale, which impedes realization of the technology's potential to reproducibly form anatomically correct human tissue units that could serve as optimal human in vitro models and even transplants. Here, we review tissue engineering methodologies that could be used to develop powerful approaches for instructing multiscale, 3-D human organoid morphogenesis. Such technological mergers are critically needed to harness organoid morphogenesis as a tool for engineering functional human tissues with biomimetic anatomy and physiology. Human PSC-derived 3-D organoids are revolutionizing the biomedical sciences. They enable the study of development and disease within patient-specific genetic backgrounds and unprecedented biomimetic tissue microenvironments. However, their uncontrolled, spontaneous morphogenesis at the microscale yields inconsistences in macroscale organoid morphology, cytoarchitecture, and cellular composition that limits their standardization and application. Integration of tissue engineering methods with organoid derivation protocols could allow us to harness their potential by instructing standardized in vitro morphogenesis

  14. An Illumination Modeling System for Human Factors Analyses

    Science.gov (United States)

    Huynh, Thong; Maida, James C.; Bond, Robert L. (Technical Monitor)

    2002-01-01

    Seeing is critical to human performance. Lighting is critical for seeing. Therefore, lighting is critical to human performance. This is common sense, and here on earth, it is easily taken for granted. However, on orbit, because the sun will rise or set every 45 minutes on average, humans working in space must cope with extremely dynamic lighting conditions. Contrast conditions of harsh shadowing and glare is also severe. The prediction of lighting conditions for critical operations is essential. Crew training can factor lighting into the lesson plans when necessary. Mission planners can determine whether low-light video cameras are required or whether additional luminaires need to be flown. The optimization of the quantity and quality of light is needed because of the effects on crew safety, on electrical power and on equipment maintainability. To address all of these issues, an illumination modeling system has been developed by the Graphics Research and Analyses Facility (GRAF) and Lighting Environment Test Facility (LETF) in the Space Human Factors Laboratory at NASA Johnson Space Center. The system uses physically based ray tracing software (Radiance) developed at Lawrence Berkeley Laboratories, a human factors oriented geometric modeling system (PLAID) and an extensive database of humans and environments. Material reflectivity properties of major surfaces and critical surfaces are measured using a gonio-reflectometer. Luminaires (lights) are measured for beam spread distribution, color and intensity. Video camera performances are measured for color and light sensitivity. 3D geometric models of humans and the environment are combined with the material and light models to form a system capable of predicting lighting conditions and visibility conditions in space.

  15. Human and mouse tissue-engineered small intestine both demonstrate digestive and absorptive function.

    Science.gov (United States)

    Grant, Christa N; Mojica, Salvador Garcia; Sala, Frederic G; Hill, J Ryan; Levin, Daniel E; Speer, Allison L; Barthel, Erik R; Shimada, Hiroyuki; Zachos, Nicholas C; Grikscheit, Tracy C

    2015-04-15

    Short bowel syndrome (SBS) is a devastating condition in which insufficient small intestinal surface area results in malnutrition and dependence on intravenous parenteral nutrition. There is an increasing incidence of SBS, particularly in premature babies and newborns with congenital intestinal anomalies. Tissue-engineered small intestine (TESI) offers a therapeutic alternative to the current standard treatment, intestinal transplantation, and has the potential to solve its biggest challenges, namely donor shortage and life-long immunosuppression. We have previously demonstrated that TESI can be generated from mouse and human small intestine and histologically replicates key components of native intestine. We hypothesized that TESI also recapitulates native small intestine function. Organoid units were generated from mouse or human donor intestine and implanted into genetically identical or immunodeficient host mice. After 4 wk, TESI was harvested and either fixed and paraffin embedded or immediately subjected to assays to illustrate function. We demonstrated that both mouse and human tissue-engineered small intestine grew into an appropriately polarized sphere of intact epithelium facing a lumen, contiguous with supporting mesenchyme, muscle, and stem/progenitor cells. The epithelium demonstrated major ultrastructural components, including tight junctions and microvilli, transporters, and functional brush-border and digestive enzymes. This study demonstrates that tissue-engineered small intestine possesses a well-differentiated epithelium with intact ion transporters/channels, functional brush-border enzymes, and similar ultrastructural components to native tissue, including progenitor cells, whether derived from mouse or human cells.

  16. Multiscale factors affecting human attitudes toward snow leopards and wolves.

    Science.gov (United States)

    Suryawanshi, Kulbhushansingh R; Bhatia, Saloni; Bhatnagar, Yash Veer; Redpath, Stephen; Mishra, Charudutt

    2014-12-01

    The threat posed by large carnivores to livestock and humans makes peaceful coexistence between them difficult. Effective implementation of conservation laws and policies depends on the attitudes of local residents toward the target species. There are many known correlates of human attitudes toward carnivores, but they have only been assessed at the scale of the individual. Because human societies are organized hierarchically, attitudes are presumably influenced by different factors at different scales of social organization, but this scale dependence has not been examined. We used structured interview surveys to quantitatively assess the attitudes of a Buddhist pastoral community toward snow leopards (Panthera uncia) and wolves (Canis lupus). We interviewed 381 individuals from 24 villages within 6 study sites across the high-elevation Spiti Valley in the Indian Trans-Himalaya. We gathered information on key explanatory variables that together captured variation in individual and village-level socioeconomic factors. We used hierarchical linear models to examine how the effect of these factors on human attitudes changed with the scale of analysis from the individual to the community. Factors significant at the individual level were gender, education, and age of the respondent (for wolves and snow leopards), number of income sources in the family (wolves), agricultural production, and large-bodied livestock holdings (snow leopards). At the community level, the significant factors included the number of smaller-bodied herded livestock killed by wolves and mean agricultural production (wolves) and village size and large livestock holdings (snow leopards). Our results show that scaling up from the individual to higher levels of social organization can highlight important factors that influence attitudes of people toward wildlife and toward formal conservation efforts in general. Such scale-specific information can help managers apply conservation measures at

  17. Motivating Factors that Affect Enrolment and Student Performance in an ODL Engineering Program

    Directory of Open Access Journals (Sweden)

    P.R. Dadigamuwa

    2012-01-01

    Full Text Available The present study was carried out to determine the motivating factors for enrolling in an engineering study programme in open and distance learning (ODL and the factors that affect the students’ performance. The study was conducted with two convenient samples of students following distance learning courses in engineering technology, conducted by the Open University of Sri Lanka and leading to the award of diploma or degree in Engineering Technology. One sample consisted of students who failed to qualify for sitting the year-end examination and the other consisted of successful students.The study showed that many students opt to follow the programme without knowing the relevance of the study programme for them. Most of the students (53% had taken the courses believing that they could obtain a recognized degree. The students with secondary education qualifications in the mathematics stream were found to be successful, provided that they had selected the ODL programmes with an understanding of the nature of the ODL system, the percentages being 61 with 4 passes, 75 with 3 passes, and 20 with 2 passes at the General Certificate in Education (Advanced Level examination.All successful students were of the opinion that the course delivery methods should be improved, especially face-to-face teaching, laboratory classes, and assignments.

  18. Extracellular matrix and growth factor engineering for controlled angiogenesis in regenerative medicine.

    Energy Technology Data Exchange (ETDEWEB)

    Martino, Mikael M.; Brkic, Sime; Bovo, Emmanuela; Burger, Maximilian; Schaefer, Dirk J.; Wolff, Thomas; Gurke, Lorenz; Briquez, Priscilla S.; Larsson, Hans M.; Gianni-Barrera, Roberto; Hubbell, Jeffrey A.; Banfi, Andrea

    2015-04-01

    Blood vessel growth plays a key role in regenerative medicine, both to restore blood supply to ischemic tissues and to ensure rapid vascularization of clinical-size tissue-engineered grafts. For example, vascular endothelial growth factor (VEGF) is the master regulator of physiological blood vessel growth and is one of the main molecular targets of therapeutic angiogenesis approaches. However, angiogenesis is a complex process and there is a need to develop rational therapeutic strategies based on a firm understanding of basic vascular biology principles, as evidenced by the disappointing results of initial clinical trials of angiogenic factor delivery. In particular, the spatial localization of angiogenic signals in the extracellular matrix (ECM) is crucial to ensure the proper assembly and maturation of new vascular structures. Here, we discuss the therapeutic implications of matrix interactions of angiogenic factors, with a special emphasis on VEGF, as well as provide an overview of current approaches, based on protein and biomaterial engineering that mimic the regulatory functions of ECM to optimize the signaling microenvironment of vascular growth factors.

  19. Extracellular matrix and growth factor engineering for controlled angiogenesis in regenerative medicine

    Directory of Open Access Journals (Sweden)

    Mikaël M Martino

    2015-04-01

    Full Text Available Blood vessel growth plays a key role in regenerative medicine, both to restore blood supply to ischemic tissues and to ensure rapid vascularization of clinical-size tissue-engineered grafts. For example, vascular endothelial growth factor (VEGF is the master regulator of physiological blood vessel growth and is one of the main molecular targets of therapeutic angiogenesis approaches. However, angiogenesis is a complex process and there is a need to develop rational therapeutic strategies based on a firm understanding of basic vascular biology principles, as evidenced by the disappointing results of initial clinical trials of angiogenic factor delivery. In particular, the spatial localization of angiogenic signals in the extracellular matrix is crucial to ensure the proper assembly and maturation of new vascular structures. Here we discuss the therapeutic implications of matrix interactions of angiogenic factors, with a special emphasis on VEGF, as well as provide an overview of current approaches, based on protein and biomaterial engineering that mimic the regulatory functions of extracellular matrix to optimize the signaling microenvironment of vascular growth factors.

  20. Genetic engineering of human NK cells to express CXCR2 improves migration to renal cell carcinoma.

    Science.gov (United States)

    Kremer, Veronika; Ligtenberg, Maarten; Zendehdel, Rosa; Seitz, Christina; Duivenvoorden, Annet; Wennerberg, Erik; Colón, Eugenia; Scherman-Plogell, Ann-Helén; Lundqvist, Andreas

    2017-09-19

    Adoptive natural killer (NK) cell transfer is being increasingly used as cancer treatment. However, clinical responses have so far been limited to patients with hematological malignancies. A potential limiting factor in patients with solid tumors is defective homing of the infused NK cells to the tumor site. Chemokines regulate the migration of leukocytes expressing corresponding chemokine receptors. Various solid tumors, including renal cell carcinoma (RCC), readily secrete ligands for the chemokine receptor CXCR2. We hypothesize that infusion of NK cells expressing high levels of the CXCR2 chemokine receptor will result in increased influx of the transferred NK cells into tumors, and improved clinical outcome in patients with cancer. Blood and tumor biopsies from 14 primary RCC patients were assessed by flow cytometry and chemokine analysis. Primary NK cells were transduced with human CXCR2 using a retroviral system. CXCR2 receptor functionality was determined by Calcium flux and NK cell migration was evaluated in transwell assays. We detected higher concentrations of CXCR2 ligands in tumors compared with plasma of RCC patients. In addition, CXCL5 levels correlated with the intratumoral infiltration of CXCR2-positive NK cells. However, tumor-infiltrating NK cells from RCC patients expressed lower CXCR2 compared with peripheral blood NK cells. Moreover, healthy donor NK cells rapidly lost their CXCR2 expression upon in vitro culture and expansion. Genetic modification of human primary NK cells to re-express CXCR2 improved their ability to specifically migrate along a chemokine gradient of recombinant CXCR2 ligands or RCC tumor supernatants compared with controls. The enhanced trafficking resulted in increased killing of target cells. In addition, while their functionality remained unchanged compared with control NK cells, CXCR2-transduced NK cells obtained increased adhesion properties and formed more conjugates with target cells. To increase the success of NK

  1. Human and organizational factors in nuclear safety; Factores humanos y organizativos en la seguridad nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, A.; Barrientos, M.; Gil, B.

    2015-07-01

    Nuclear installations are socio technical systems where human and organizational factors, in both utilities and regulators, have a significant impact on safety. Three Mile Island (TMI) accident, original of several initiatives in the human factors field, nevertheless became a lost opportunity to timely acquire lessons related to the upper tiers of the system. Nowadays, Spanish nuclear installations have integrated in their processes specialists and activities in human and organizational factors, promoted by the licensees After many years of hard work, Spanish installations have achieved a better position to face new challenges, such as those posed by Fukushima. With this experience, only technology-centered action plan would not be acceptable, turning this accident in yet another lost opportunity. (Author)

  2. Enrolling in Science and Engineering Academic Programs—Motivating and Deterring Factors

    Science.gov (United States)

    Pomazan, Valentina; Mihalaşcu, Doina; Petcu, Lucian C.; Gîrtu, Mihai A.

    2010-01-01

    We report the results of the student responses to a survey aiming to determine the factors influencing the young generation in choosing a career in science and technology. The goal of the study is twofold: to identify the motives that determine students to enroll in university programs in science and technology and to engage in applied science and engineering careers and to discover the barriers that manifest at different age levels, preventing students from making such choices. The study was conducted at the Ovidius University and the "Energetic" Technical High School, both in Constanta, Romania, with samples of 257 and 106 students respectively, based on a 38 item online questionnaire. The samples selected from the student population allow for a wide range of analyses with respect to gender, family and educational background, field of study, etc. We discuss the role of the raw models, parents, educators, and we comment on ways to increase student enrollment in science and engineering.

  3. Engineering factors influencing Corbicula fouling in nuclear-service water systems

    Energy Technology Data Exchange (ETDEWEB)

    Henager, C.H.; Johnson, K.I.; Page, T.L.

    1983-06-01

    Corbicula fouling is a continuing problem in nuclear-service water systems. More knowledge of biological and engineering factors is needed to develop effective detection and control methods. A data base on Corbicula fouling was compiled from nuclear and non-nuclear power stations and industries using raw water. This data base was used in an analysis to identify systems and components which are conducive to fouling by Corbicula. Bounds on several engineering parameters such as velocity and temperature which support Corbicula growth are given. Service water systems found in BWR and PWR reactors are listed and those that show fouling are identified. Possible safety implications of Corbicula fouling are discussed for specific service water systems. Several effective control methods in current use include backflushing with heated water, centrifugal strainers, and continuous chlorination during spawning seasons.

  4. A Framework for Geometric Reasoning About Human Figures and Factors in Assembly Processes

    Energy Technology Data Exchange (ETDEWEB)

    Calton, Terri L.

    1999-07-20

    Automatic assembly sequencing and visualization tools are valuable in determining the best assembly sequences, but without Human Factors and Figure Models (HFFMs) it is difficult to evaluate or visualize human interaction. In industry, accelerating technological advances and shorter market windows have forced companies to turn to an agile manufacturing paradigm. This trend has promoted computerized automation of product design and manufacturing processes, such as automated assembly planning. However, all automated assembly planning software tools assume that the individual components fly into their assembled configuration and generate what appear to be perfectly valid operations, but in reality some operations cannot physically be carried out by a human. For example, the use of a ratchet may be reasoned feasible for an assembly operation; however, when a hand is placed on the tool the operation is no longer feasible, perhaps because of inaccessibility, insufficient strength or human interference with assembly components. Similarly, human figure modeling algorithms may indicate that assembly operations are not feasible and consequently force design modifications, however, if they had the capability to quickly generate alternative assembly sequences, they might have identified a feasible solution. To solve this problem, HFFMs must be integrated with automated assembly planning which allows engineers to quickly verify that assembly operations are possible and to see ways to make the designs even better. This paper presents a framework for integrating geometry-based assembly planning algorithms with commercially available human figure modeling software packages. Experimental results to selected applications along with lessons learned are presented.

  5. The development of human factors experimental evaluation techniques

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Bong Shick; Oh, In Suk; Cha, Kyung Ho; Lee, Hyun Chul; Park, Geun Ok; Cheon, Se Woo; Suh, Sang Moon

    1997-07-01

    New human factors issues, such as evaluation of information navigation, the consideration of operator characteristics, and operator performance assessment, related to the HMI design based on VDUs are being risen. Thus, in order to solve these human factors issues, this project aims to establish the experimental technologies including the techniques for experimental design, experimental measurement, data collection and analysis, and to develop ITF (Integrated Test Facility) suitable for the experiment of HMI design evaluation. For the establish of the experimental data analysis and evaluation methodologies, we developed as the following: (1) a paradigm for human factors experimentation including experimental designs, procedures, and data analysis. (2) the methods for the assessment of operator`s mental workload (3) DAEXESS (data analysis and experiment evaluation supporting system). Also, we have established a experiment execution technologies through the preliminary experiments, such as the suitability evaluation of information display on a LSDP, the evaluation of information display on a LSDP, the evaluation of computerized operation procedure and an experiment of advanced alarm system (ADIOS). Finally, we developed the ITF including human machine simulator, telemetry system, an eye tracking system, an audio/video data measurement system, and three dimensional micro behaviour analysis system. (author). 81 refs., 68 tabs., 73 figs.

  6. Human Factors Issues For Multi-Modular Reactor Units

    Energy Technology Data Exchange (ETDEWEB)

    Tuan Q Tran; Humberto E. Garcia; Ronald L. Boring; Jeffrey C. Joe; Bruce P. Hallbert

    2007-08-01

    Smaller and multi-modular reactor (MMR) will be highly technologically-advanced systems allowing more system flexibility to reactors configurations (e.g., addition/deletion of reactor units). While the technical and financial advantages of systems may be numerous, MMR presents many human factors challenges that may pose vulnerability to plant safety. An important human factors challenge in MMR operation and performance is the monitoring of data from multiple plants from centralized control rooms where human operators are responsible for interpreting, assessing, and responding to different system’s states and failures (e.g., simultaneously monitoring refueling at one plant while keeping an eye on another plant’s normal operating state). Furthermore, the operational, safety, and performance requirements for MMR can seriously change current staffing models and roles, the mode in which information is displayed, procedures and training to support and guide operators, and risk analysis. For these reasons, addressing human factors concerns in MMR are essential in reducing plant risk.

  7. Human factors for the Moon: the gap in anthropometric data.

    Science.gov (United States)

    Lia Schlacht, Irene; Foing, Bernard H.; Rittweger, Joern; Masali, Melchiorre; Stevenin, Hervé

    2016-07-01

    Since the space era began, we learned first to survive and then to live in space. In the state of the art, we know how important human factors research and development is to guarantee maximum safety and performance for human missions. With the extension of the duration of space missions, we also need to learn how habitability and comfort factors are closely related to safety and performance. Humanities disciplines such as design, architecture, anthropometry, and anthropology are now involved in mission design from the start. Actual plans for building a simulated Moon village in order to simulate and test Moon missions are now being carried out using a holistic approach, involving multidisciplinary experts cooperating concurrently with regard to the interactions among humans, technology, and the environment. However, in order to implement such plans, we need basic anthropometrical data, which is still missing. In other words: to optimize performance, we need to create doors and ceilings with dimensions that support a natural human movement in the reduced gravity environment of the Moon, but we are lacking detailed anthropometrical data on human movement on the Moon. In the Apollo missions more than 50 years ago, no anthropometrical studies were carried in hypogravity out as far as we know. The necessity to collect data is very consistent with state-of-the-art research. We still have little knowledge of how people will interact with the Moon environment. Specifically, it is not known exactly which posture, which kind of walking and running motions astronauts will use both inside and outside a Moon station. Considering recent plans for a Moon mission where humans will spend extensive time in reduced gravity conditions, the need for anthropometric, biomechanics and kinematics field data is a priority in order to be able to design the right architecture, infrastructure, and interfaces. Objective of this paper: Bring knowledge on the relevance of anthropometrical and

  8. Exploration of Factors Affecting Success of Undergraduate Engineering Majors at a Historically Black University

    Science.gov (United States)

    Igbinoba, Egheosa P.

    Blacks are underrepresented amongst persons who earn college degrees in the United States and Black males attend and complete college at a lower rate than Black females (Toldson, Fry Brown, & Sutton, 2009). According to Toldson et al. (2009), this quandary may be attributed to Black males' apathy toward education in general, waning support and ideological challenges toward Pell Grants and affirmative action, cultural incompetency on the part of the 90% White, ethnic makeup of the U.S. teaching force, and the relatively high numbers of Black males who are held back in school. In spite of the dismal statistics regarding Black male academic achievement and matriculation, there are those Black males who do participate in postsecondary education. While many studies have highlighted reasons that Black males do not achieve success in attending and persisting through college, few have adopted the anti-deficit research framework suggested by Harper (2010), identifying reasons Black males do persist in higher education. Although science, technology, engineering, and mathematics careers are identified as those most imperative to the economic competitiveness of the United States, few studies have concentrated solely on engineering majors and fewer, if any, solely on Black male engineering majors at an historically Black college and university. The aim of this study was to address an apparent gap in the literature and invoke theories for recruitment, retention, and success of Black males in engineering degree programs by employing an anti-deficit achievement framework for research of students of color in science, technology, engineering, and mathematics. Data garnered from the study included insight into participants' definitions of success, precollege experiences, factors contributing to the persistence during undergraduate study, and perceptions of attending a historically Black college and university versus a primarily White institution.

  9. A simple relationship between the sunlight concentration factor and the thermal conductance in a class of photothermal engines

    Energy Technology Data Exchange (ETDEWEB)

    Rocha-Martinez, J.A.; Navarrete-Gonzalez, T.D. [Area de Fisica, Dept. de Ciencias Basicas, Universidad Autonoma Metropolitana Azcapotzalco, Mexico (Mexico); Angulo-Brown, F. [Departaamento de Fisica, Escuela Superior de Fisica y Matematicas, Instituto Politecnico Nacional, Mexico (Mexico)

    1998-07-21

    In this brief paper we present an addendum to a recently published analysis of a photothermal engine model. Here, we numerically demonstrate that the design parameters, the sunlight concentration factor and the thermal conductances of materials employed as thermal conductors are linked by a simple relationship, if one wishes to obtain the maximization of the power output of the photothermal engine. (author)

  10. My 20 years of experience in the human factors field

    Energy Technology Data Exchange (ETDEWEB)

    Carnino, A. (International Atomic Energy Agency, Vienna (Austria))

    1992-01-01

    My first encounter with human factors happened in early 1973: I was performing a reliability assessment of the safety injection system of the Fessenheim reactor, and I found that the operators had to switch to the recirculation phase manually and had only 6 min between the low and low-low level alarm indicating that the water tank was empty. It of course led us to replace this manual action by an automatic positioning for the recirculation phase. In July of the same year, I attended a North Atlantic Treaty Organization workshop in Liverpool on reliability assessment, and I met Alan Swain from the United States and Jens Rasmussen from Denmark. During the long rainy evenings of the seminar, we had time to discuss human errors and human factors, and that was the beginning of a very fruitful collaboration between us. I realized then the complexity of the problem. Quantification needs were obvious for reliability and risk assessment studies, but, at the same time, there were needs for better understanding of human behavior and the mechanisms that could lead to human errors. Knowledge of the man-machine interface also seemed very poor, although some basic ergonomic rules were available and could be applied. But a major problem was the lack of data.

  11. An expansive human regulatory lexicon encoded in transcription factor footprints.

    Science.gov (United States)

    Neph, Shane; Vierstra, Jeff; Stergachis, Andrew B; Reynolds, Alex P; Haugen, Eric; Vernot, Benjamin; Thurman, Robert E; John, Sam; Sandstrom, Richard; Johnson, Audra K; Maurano, Matthew T; Humbert, Richard; Rynes, Eric; Wang, Hao; Vong, Shinny; Lee, Kristen; Bates, Daniel; Diegel, Morgan; Roach, Vaughn; Dunn, Douglas; Neri, Jun; Schafer, Anthony; Hansen, R Scott; Kutyavin, Tanya; Giste, Erika; Weaver, Molly; Canfield, Theresa; Sabo, Peter; Zhang, Miaohua; Balasundaram, Gayathri; Byron, Rachel; MacCoss, Michael J; Akey, Joshua M; Bender, M A; Groudine, Mark; Kaul, Rajinder; Stamatoyannopoulos, John A

    2012-09-06

    Regulatory factor binding to genomic DNA protects the underlying sequence from cleavage by DNase I, leaving nucleotide-resolution footprints. Using genomic DNase I footprinting across 41 diverse cell and tissue types, we detected 45 million transcription factor occupancy events within regulatory regions, representing differential binding to 8.4 million distinct short sequence elements. Here we show that this small genomic sequence compartment, roughly twice the size of the exome, encodes an expansive repertoire of conserved recognition sequences for DNA-binding proteins that nearly doubles the size of the human cis-regulatory lexicon. We find that genetic variants affecting allelic chromatin states are concentrated in footprints, and that these elements are preferentially sheltered from DNA methylation. High-resolution DNase I cleavage patterns mirror nucleotide-level evolutionary conservation and track the crystallographic topography of protein-DNA interfaces, indicating that transcription factor structure has been evolutionarily imprinted on the human genome sequence. We identify a stereotyped 50-base-pair footprint that precisely defines the site of transcript origination within thousands of human promoters. Finally, we describe a large collection of novel regulatory factor recognition motifs that are highly conserved in both sequence and function, and exhibit cell-selective occupancy patterns that closely parallel major regulators of development, differentiation and pluripotency.

  12. Three-Dimensionally Engineered Normal Human Lung Tissue-Like Assemblies: Target Tissues for Human Respiratory Viral Infections

    Science.gov (United States)

    Goodwin, Thomas J.; McCarthy, M.; Lin, Y-H.; Deatly, A. M.

    2008-01-01

    In vitro three-dimensional (3D) human lung epithelio-mesenchymal tissue-like assemblies (3D hLEM TLAs) from this point forward referred to as TLAs were engineered in Rotating Wall Vessel (RWV) technology to mimic the characteristics of in vivo tissues thus providing a tool to study human respiratory viruses and host cell interactions. The TLAs were bioengineered onto collagen-coated cyclodextran microcarriers using primary human mesenchymal bronchial-tracheal cells (HBTC) as the foundation matrix and an adult human bronchial epithelial immortalized cell line (BEAS-2B) as the overlying component. The resulting TLAs share significant characteristics with in vivo human respiratory epithelium including polarization, tight junctions, desmosomes, and microvilli. The presence of tissue-like differentiation markers including villin, keratins, and specific lung epithelium markers, as well as the production of tissue mucin, further confirm these TLAs differentiated into tissues functionally similar to in vivo tissues. Increasing virus titers for human respiratory syncytial virus (wtRSVA2) and the detection of membrane bound glycoproteins over time confirm productive infection with the virus. Therefore, we assert TLAs mimic aspects of the human respiratory epithelium and provide a unique capability to study the interactions of respiratory viruses and their primary target tissue independent of the host s immune system.

  13. Three-Dimensionally Engineered Normal Human Broncho-epithelial Tissue-Like Assemblies: Target Tissues for Human Respiratory Viral Infections

    Science.gov (United States)

    Goodwin, T. J.; McCarthy, M.; Lin, Y-H

    2006-01-01

    In vitro three-dimensional (3D) human broncho-epithelial (HBE) tissue-like assemblies (3D HBE TLAs) from this point forward referred to as TLAs were engineered in Rotating Wall Vessel (RWV) technology to mimic the characteristics of in vivo tissues thus providing a tool to study human respiratory viruses and host cell interactions. The TLAs were bioengineered onto collagen-coated cyclodextran microcarriers using primary human mesenchymal bronchial-tracheal cells (HBTC) as the foundation matrix and an adult human bronchial epithelial immortalized cell line (BEAS-2B) as the overlying component. The resulting TLAs share significant characteristics with in vivo human respiratory epithelium including polarization, tight junctions, desmosomes, and microvilli. The presence of tissue-like differentiation markers including villin, keratins, and specific lung epithelium markers, as well as the production of tissue mucin, further confirm these TLAs differentiated into tissues functionally similar to in vivo tissues. Increasing virus titers for human respiratory syncytial virus (wtRSVA2) and parainfluenza virus type 3 (wtPIV3 JS) and the detection of membrane bound glycoproteins over time confirm productive infections with both viruses. Therefore, TLAs mimic aspects of the human respiratory epithelium and provide a unique capability to study the interactions of respiratory viruses and their primary target tissue independent of the host's immune system.

  14. Three-Dimensionally Engineered Normal Human Broncho-epithelial Tissue-Like Assemblies: Target Tissues for Human Respiratory Viral Infections

    Science.gov (United States)

    Goodwin, T. J.; McCarthy, M.; Lin, Y-H

    2006-01-01

    In vitro three-dimensional (3D) human broncho-epithelial (HBE) tissue-like assemblies (3D HBE TLAs) from this point forward referred to as TLAs were engineered in Rotating Wall Vessel (RWV) technology to mimic the characteristics of in vivo tissues thus providing a tool to study human respiratory viruses and host cell interactions. The TLAs were bioengineered onto collagen-coated cyclodextran microcarriers using primary human mesenchymal bronchial-tracheal cells (HBTC) as the foundation matrix and an adult human bronchial epithelial immortalized cell line (BEAS-2B) as the overlying component. The resulting TLAs share significant characteristics with in vivo human respiratory epithelium including polarization, tight junctions, desmosomes, and microvilli. The presence of tissue-like differentiation markers including villin, keratins, and specific lung epithelium markers, as well as the production of tissue mucin, further confirm these TLAs differentiated into tissues functionally similar to in vivo tissues. Increasing virus titers for human respiratory syncytial virus (wtRSVA2) and parainfluenza virus type 3 (wtPIV3 JS) and the detection of membrane bound glycoproteins over time confirm productive infections with both viruses. Therefore, TLAs mimic aspects of the human respiratory epithelium and provide a unique capability to study the interactions of respiratory viruses and their primary target tissue independent of the host's immune system.

  15. Human cytomegalovirus IE2 protein interacts with transcription activating factors

    Institute of Scientific and Technical Information of China (English)

    XU; Jinping(徐进平); YE; Linbai(叶林柏)

    2002-01-01

    The human cytomegalovirus (HCMV) IE86 Cdna was cloned into Pgex-2T and fusion protein GST-IE86 was expressed in E. Coli. SDS-PAGE and Western blot assay indicated that fusion protein GST-IE86 with molecular weight of 92 ku is soluble in the supernatant of cell lysate. Protein GST and fusion protein GST-IE86 were purified by affinity chromatography. The technology of co-separation and specific affinity chromatography was used to study the interactions of HCMV IE86 protein with some transcriptional regulatory proteins and transcriptional factors. The results indicated that IE86 interacts separately with transcriptional factor TFIIB and promoter DNA binding transcription trans-activating factors SP1, AP1 and AP2 to form a heterogenous protein complex. These transcriptional trans-activating factors, transcriptional factor and IE86 protein were adsorbed and retained in the affinity chromatography simultaneously. But IE86 protein could not interact with NF-Кb, suggesting that the function of IE86 protein that can interact with transcriptional factor and transcriptional trans-activating factors has no relevance to protein glycosylation. IE86 protein probably has two domains responsible for binding transcriptional trans-activating regulatory proteins and transcriptional factors respectively, thus activating the transcription of many genes. The interactions accelerated the assembly of the transcriptional initiation complexes.

  16. Mathematical Model of Growth Factor Driven Haptotaxis and Proliferation in a Tissue Engineering Scaffold

    KAUST Repository

    Pohlmeyer, J. V.

    2013-01-29

    Motivated by experimental work (Miller et al. in Biomaterials 27(10):2213-2221, 2006, 32(11):2775-2785, 2011) we investigate the effect of growth factor driven haptotaxis and proliferation in a perfusion tissue engineering bioreactor, in which nutrient-rich culture medium is perfused through a 2D porous scaffold impregnated with growth factor and seeded with cells. We model these processes on the timescale of cell proliferation, which typically is of the order of days. While a quantitative representation of these phenomena requires more experimental data than is yet available, qualitative agreement with preliminary experimental studies (Miller et al. in Biomaterials 27(10):2213-2221, 2006) is obtained, and appears promising. The ultimate goal of such modeling is to ascertain initial conditions (growth factor distribution, initial cell seeding, etc.) that will lead to a final desired outcome. © 2013 Society for Mathematical Biology.

  17. Engineering and commercialization of human-device interfaces, from bone to brain.

    Science.gov (United States)

    Knothe Tate, Melissa L; Detamore, Michael; Capadona, Jeffrey R; Woolley, Andrew; Knothe, Ulf

    2016-07-01

    Cutting edge developments in engineering of tissues, implants and devices allow for guidance and control of specific physiological structure-function relationships. Yet the engineering of functionally appropriate human-device interfaces represents an intractable challenge in the field. This leading opinion review outlines a set of current approaches as well as hurdles to design of interfaces that modulate transfer of information, i.a. forces, electrical potentials, chemical gradients and haptotactic paths, between endogenous and engineered body parts or tissues. The compendium is designed to bridge across currently separated disciplines by highlighting specific commonalities between seemingly disparate systems, e.g. musculoskeletal and nervous systems. We focus on specific examples from our own laboratories, demonstrating that the seemingly disparate musculoskeletal and nervous systems share common paradigms which can be harnessed to inspire innovative interface design solutions. Functional barrier interfaces that control molecular and biophysical traffic between tissue compartments of joints are addressed in an example of the knee. Furthermore, we describe the engineering of gradients for interfaces between endogenous and engineered tissues as well as between electrodes that physically and electrochemically couple the nervous and musculoskeletal systems. Finally, to promote translation of newly developed technologies into products, protocols, and treatments that benefit the patients who need them most, regulatory and technical challenges and opportunities are addressed on hand from an example of an implant cum delivery device that can be used to heal soft and hard tissues, from brain to bone. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  18. Recommendations to the NRC on human engineering guidelines for nuclear power plant maintainability

    Energy Technology Data Exchange (ETDEWEB)

    Badalamente, R.V.; Fecht, B.A.; Blahnik, D.E.; Eklund, J.D.; Hartley, C.S.

    1986-03-01

    This document contains human engineering guidelines which can enhance the maintainability of nuclear power plants. The guidelines have been derived from general human engineering design principles, criteria, and data. The guidelines may be applied to existing plants as well as to plants under construction. They apply to nuclear power plant systems, equipment and facilities, as well as to maintenance tools and equipment. The guidelines are grouped into seven categories: accessibility and workspace, physical environment, loads and forces, maintenance facilities, maintenance tools and equipment, operating equipment design, and information needs. Each chapter of the document details specific maintainability problems encountered at nuclear power plants, the safety impact of these problems, and the specific maintainability design guidelines whose application can serve to avoid these problems in new or existing plants.

  19. Factors influencing trace element composition in human teeth

    Energy Technology Data Exchange (ETDEWEB)

    Tandon, L. [Los Alamos National Lab., NM (United States); Iyengar, G.V. [Biomineral Sciences International, Inc., Bethesda, MD (United States)

    1997-12-01

    The authors recently compiled and reviewed the literature published in or after 1978 for 45 major, minor, and trace elements in human teeth as a part of an International Atomic Energy Agency (IAEA) study. The purpose of this paper is to discuss the various factors that influence the concentration levels of certain trace elements in human teeth. The sampling practices and analytical techniques that are applicable for trace element analysis are also discussed. It is also our intention to identify reference range of values, where data permit such conclusions. The scrutiny was designed to identify only the healthy permanent teeth, and values from teeth with fillings, caries, or periodontal diseases were eliminated.

  20. Space Flight Human System Standards (SFHSS). Volume 2; Human Factors, Habitability and Environmental Factors" and Human Integration Design Handbook (HIDH)

    Science.gov (United States)

    Davis, Jeffrey R.; Fitts, David J.

    2009-01-01

    This viewgraph presentation reviews the standards for space flight hardware based on human capabilities and limitations. The contents include: 1) Scope; 2) Applicable documents; 3) General; 4) Human Physical Characteristics and Capabilities; 5) Human Performance and Cognition; 6) Natural and Induced Environments; 7) Habitability Functions; 8) Architecture; 9) Hardware and Equipment; 10) Crew Interfaces; 11) Spacesuits; 12) Operatons: Reserved; 13) Ground Maintenance and Assembly: Reserved; 14) Appendix A-Reference Documents; 15) Appendix N-Acronyms and 16) Appendix C-Definition. Volume 2 is supported by the Human Integration Design Handbook (HIDH)s.

  1. Transcription of human respiratory syncytial virus genome RNA in vitro: requirement of cellular factor(s).

    OpenAIRE

    Barik, S

    1992-01-01

    Extracts made from human respiratory syncytial virus (RSV)-infected Hep-2 cells synthesized mRNAs encoded by all known viral genes. In contrast, RSV ribonucleoproteins purified from infected cells failed to transcribe in vitro; transcription was restored by addition of a cytoplasmic extract of uninfected Hep-2 cells, demonstrating that a cellular factor(s) has a role in RSV gene expression. Quantitation of the individual gene mRNAs transcribed in vitro revealed polarity of transcription of th...

  2. Use of the virtual instrumentation laboratory for the assessment of human factors in surgery and anesthesia.

    Science.gov (United States)

    Berguer, R; Loeb, R G; Smith, W D

    1997-01-01

    There is a growing consensus that human factors issues for anesthesiologists, surgeons, and other operating room personnel require serious attention. We have established a program of collaboration between the University of California Davis Medical Center Departments of Anesthesiology and Surgery and the California State University Sacramento Biomedical Engineering Program to address ergonomic problems in anesthesiology and surgery using a Virtual Instrumentation Laboratory. A 17-workstation Virtual Instrument Laboratory using LabVIEW software on Power Macintosh platforms permits rapid prototyping of medical monitor displays as well as rapid development of data acquisition and processing circuits for physiologic data collection. The Virtual Instrument Lab has been used for three Master's thesis projects and a BME course titled Human Factors in the Design of Medical and Assistive Technology. Course projects have included: 1) The design of novel physiologic data displays for potential use in anesthesia workstations, and 2) The measurement of surface electromyographic signals and heart rate variability to investigate the physical and mental workload of performing laparoscopic surgery. The Virtual Instrument Lab allows BME students to investigate relatively complex human factors issues in anesthesiology and surgery in a short time span.

  3. In-vehicle human factors for integrated multi-function systems: Making ITS user-friendly

    Energy Technology Data Exchange (ETDEWEB)

    Spelt, P.F.; Scott, S.

    1998-04-01

    As more and more Intelligent Transportation System in-vehicle equipment enters the general consumer market, the authors are about to find out how different design engineers are from ordinary drivers. Driver information systems are being developed and installed in vehicles at an ever-increasing rate. These systems provide information on diverse topics of concern and convenience to the driver, such as routing and navigation, emergency and collision warnings, and a variety of motorists services, or yellow pages functions. Most of these systems are being developed and installed in isolation from each other, with separate means of gathering the information and of displaying it to the driver. The current lack of coordination among on-board systems threatens to create a situation in which different messages on separate displays will be competing with each other for the drivers attention. Urgent messages may go unnoticed, and the number of messages may distract the driver from the most critical task of controlling the vehicle. Thus, without good human factors design and engineering for integrating multiple systems in the vehicle, consumers may find ITS systems confusing and frustrating to use. The current state of the art in human factors research and design for in-vehicle systems has a number of fundamental gaps. Some of these gaps were identified during the Intelligent Vehicle Initiative Human Factors Technology Workshop, sponsored by the US Department of Transportation, in Troy, Michigan, December 10--11, 1997. One task for workshop participants was to identify needed research areas or topics relating to in-vehicle human factors. The top ten unmet research needs from this workshop are presented. Many of these gaps in human factors research knowledge indicate the need for standardization in the functioning of interfaces for safety-related devices such as collision avoidance systems (CAS) and adaptive cruise controls (ACC). Such standards and guidelines will serve to make

  4. Value of human amniotic epithelial cells in tissue engineering for cornea.

    Science.gov (United States)

    Fatimah, Simat Siti; Ng, Sook Luan; Chua, Kien Hui; Hayati, Abdul Rahman; Tan, Ay Eeng; Tan, Geok Chin

    2010-11-01

    Human amniotic epithelial cells (hAECs) are potentially one of the key players in tissue engineering due to their easy availability. The aim of the present study was to develop an optimal isolation and transportation technique, as well as to determine the immunophenotype and epithelial gene expression of hAECs. Amnion was mechanically peeled off from the chorion and digested with trypsin-ethylenediaminetetraacetic acid. The isolated hAECs were cultured in medium containing 10 ng/mL epidermal growth factor until P4. The epithelial gene expression, cell surface antigen and protein expression of hAECs were analyzed by quantitative polymerase chain reaction, flow cytometry and immunocytochemistry. hAECs were also cultured in adipogenic, osteogenic and neurogenic induction media. The best cell yield of hAECs was seen in the digestion of 15 pieces of amnion (2 × 2 cm) and isolated 30 min after digestion with trypsin. F12:Dulbecco's modified eagle medium was the best medium for short term storage at 4 °C. hAECs expressed CD9, CD44, CD73 and CD90, and negligibly expressed CD31, CD34, CD45 and CD117. After serial passage, CK3, CK19 and involucrin gene expressions were upregulated, while p63, CK1 and CK14 gene expressions were downregulated. Sustained gene expressions of integrin β1 and CK18 were observed. At initial culture, these cells might have stem-like properties. However, they differentiated after serial passage. Nonetheless, hAECs have epithelial stem cell characteristics and have the potential to differentiate into corneal epithelial cells. Further investigations are still needed to elucidate the mechanism of differentiation involved and to optimize the culture condition for long term in vitro culture.

  5. Workshop on cooperative and human aspects of software engineering (CHASE 2011)

    DEFF Research Database (Denmark)

    Cataldo, Marcelo; de Souza, Cleidson; Dittrich, Yvonne

    2011-01-01

    is to provide a forum for discussing high quality research on human and cooperative aspects of software engineering. We aim at providing both a meeting place for the growing community and the possibility for researchers interested in joining the field to present their work in progress and get an overview over......Software is created by people for people working in varied environments, under various conditions. Thus understanding cooperative and human aspects of software development is crucial to comprehend how methods and tools are used, and thereby improve the creation and maintenance of software. Over...

  6. Workshop on cooperative and human aspects of software engineering (CHASE 2011)

    DEFF Research Database (Denmark)

    Cataldo, Marcelo; de Souza, Cleidson; Dittrich, Yvonne

    2011-01-01

    is to provide a forum for discussing high quality research on human and cooperative aspects of software engineering. We aim at providing both a meeting place for the growing community and the possibility for researchers interested in joining the field to present their work in progress and get an overview over......Software is created by people for people working in varied environments, under various conditions. Thus understanding cooperative and human aspects of software development is crucial to comprehend how methods and tools are used, and thereby improve the creation and maintenance of software. Over...

  7. Noninvasive metabolic imaging of engineered 3D human adipose tissue in a perfusion bioreactor.

    Directory of Open Access Journals (Sweden)

    Andrew Ward

    Full Text Available The efficacy and economy of most in vitro human models used in research is limited by the lack of a physiologically-relevant three-dimensional perfused environment and the inability to noninvasively quantify the structural and biochemical characteristics of the tissue. The goal of this project was to develop a perfusion bioreactor system compatible with two-photon imaging to noninvasively assess tissue engineered human adipose tissue structure and function in vitro. Three-dimensional (3D vascularized human adipose tissues were engineered in vitro, before being introduced to a perfusion environment and tracked over time by automated quantification of endogenous markers of metabolism using two-photon excited fluorescence (TPEF. Depth-resolved image stacks were analyzed for redox ratio metabolic profiling and compared to prior analyses performed on 3D engineered adipose tissue in static culture. Traditional assessments with H&E staining were used to qualitatively measure extracellular matrix generation and cell density with respect to location within the tissue. The distribution of cells within the tissue and average cellular redox ratios were different between static and perfusion cultures, while the trends of decreased redox ratio and increased cellular proliferation with time in both static and perfusion cultures were similar. These results establish a basis for noninvasive optical tracking of tissue structure and function in vitro, which can be applied to future studies to assess tissue development or drug toxicity screening and disease progression.

  8. Noninvasive metabolic imaging of engineered 3D human adipose tissue in a perfusion bioreactor.

    Science.gov (United States)

    Ward, Andrew; Quinn, Kyle P; Bellas, Evangelia; Georgakoudi, Irene; Kaplan, David L

    2013-01-01

    The efficacy and economy of most in vitro human models used in research is limited by the lack of a physiologically-relevant three-dimensional perfused environment and the inability to noninvasively quantify the structural and biochemical characteristics of the tissue. The goal of this project was to develop a perfusion bioreactor system compatible with two-photon imaging to noninvasively assess tissue engineered human adipose tissue structure and function in vitro. Three-dimensional (3D) vascularized human adipose tissues were engineered in vitro, before being introduced to a perfusion environment and tracked over time by automated quantification of endogenous markers of metabolism using two-photon excited fluorescence (TPEF). Depth-resolved image stacks were analyzed for redox ratio metabolic profiling and compared to prior analyses performed on 3D engineered adipose tissue in static culture. Traditional assessments with H&E staining were used to qualitatively measure extracellular matrix generation and cell density with respect to location within the tissue. The distribution of cells within the tissue and average cellular redox ratios were different between static and perfusion cultures, while the trends of decreased redox ratio and increased cellular proliferation with time in both static and perfusion cultures were similar. These results establish a basis for noninvasive optical tracking of tissue structure and function in vitro, which can be applied to future studies to assess tissue development or drug toxicity screening and disease progression.

  9. Efficient CRISPR/Cas9-based Genome Engineering in Human Pluripotent Stem Cells

    Science.gov (United States)

    Kime, Cody; Mandegar, Mohammad A.; Srivastava, Deepak; Yamanaka, Shinya; Conklin, Bruce R.; Rand, Tim A.

    2016-01-01

    Human pluripotent stem cells (hPSCs) are rapidly emerging as a powerful tool for biomedical discovery. The advent of human induced pluripotent stem (hiPS) cells with human embryonic stem (hES) cell-like properties has led to hPSCs with disease-specific genetic backgrounds for in-vitro disease modeling, drug discovery, mechanistic and developmental studies. To fully realize this potential it will be necessary to modify the genome of hPSCs with precision and flexibility. Pioneering experiments utilizing site-specific double strand break (DSB)-mediated genome engineering tools, including Zinc Finger Nucleases (ZFNs) and Transcription Activator-Like Effector Nucleases (TALENs), have paved the way to genome engineering in previously recalcitrant systems such as hPSCs. However, these methods are technically cumbersome and require significant expertise, which limited adoption. A major recent advance involving the Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) endonuclease has dramatically simplified the effort required for genome engineering and will likely be adopted widely as the most rapid and flexible system for genome editing in hPSCs. Herein, we describe commonly practiced methods for CRISPR endonuclease genomic editing of hPSCs to cell lines containing genomes altered by Insertion/Deletion (INDEL) mutagenesis or insertion of recombinant genomic DNA. PMID:26724721

  10. Efficient CRISPR/Cas9-Based Genome Engineering in Human Pluripotent Stem Cells.

    Science.gov (United States)

    Kime, Cody; Mandegar, Mohammad A; Srivastava, Deepak; Yamanaka, Shinya; Conklin, Bruce R; Rand, Tim A

    2016-01-01

    Human pluripotent stem cells (hPS cells) are rapidly emerging as a powerful tool for biomedical discovery. The advent of human induced pluripotent stem cells (hiPS cells) with human embryonic stem (hES)-cell-like properties has led to hPS cells with disease-specific genetic backgrounds for in vitro disease modeling and drug discovery as well as mechanistic and developmental studies. To fully realize this potential, it will be necessary to modify the genome of hPS cells with precision and flexibility. Pioneering experiments utilizing site-specific double-strand break (DSB)-mediated genome engineering tools, including zinc finger nucleases (ZFNs) and transcription activator-like effector nucleases (TALENs), have paved the way to genome engineering in previously recalcitrant systems such as hPS cells. However, these methods are technically cumbersome and require significant expertise, which has limited adoption. A major recent advance involving the clustered regularly interspaced short palindromic repeats (CRISPR) endonuclease has dramatically simplified the effort required for genome engineering and will likely be adopted widely as the most rapid and flexible system for genome editing in hPS cells. In this unit, we describe commonly practiced methods for CRISPR endonuclease genomic editing of hPS cells into cell lines containing genomes altered by insertion/deletion (indel) mutagenesis or insertion of recombinant genomic DNA.

  11. Vancouver Experience of Recombinant Human Platelet-Derived Growth Factor.

    Science.gov (United States)

    Younger, Alistair; Penner, Murray; Montijo, Harvey E

    2016-12-01

    Joint arthrodesis utilizing autogenous bone graft remains the gold standard of treatment in fusion procedures of the foot and ankle. Graft harvest, however, has been associated with increased morbidity to patients as well as increased costs. With this in mind, multiple clinical studies have evaluated the efficacy of recombinant human platelet-derived growth factor (rh-PDGF-BB) with beta-tricalcium phosphate (B-TCP) to augment in foot and ankle arthrodesis with favorable results. These factors have led to the increased use of rh-PDGF-BB with B-TCP in Vancouver with good clinical results. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. The Design of the Internet's Architecture by the Internet Engineering Task Force (IETF) and Human Rights.

    Science.gov (United States)

    Cath, Corinne; Floridi, Luciano

    2017-04-01

    The debate on whether and how the Internet can protect and foster human rights has become a defining issue of our time. This debate often focuses on Internet governance from a regulatory perspective, underestimating the influence and power of the governance of the Internet's architecture. The technical decisions made by Internet Standard Developing Organisations (SDOs) that build and maintain the technical infrastructure of the Internet influences how information flows. They rearrange the shape of the technically mediated public sphere, including which rights it protects and which practices it enables. In this article, we contribute to the debate on SDOs' ethical responsibility to bring their work in line with human rights. We defend three theses. First, SDOs' work is inherently political. Second, the Internet Engineering Task Force (IETF), one of the most influential SDOs, has a moral obligation to ensure its work is coherent with, and fosters, human rights. Third, the IETF should enable the actualisation of human rights through the protocols and standards it designs by implementing a responsibility-by-design approach to engineering. We conclude by presenting some initial recommendations on how to ensure that work carried out by the IETF may enable human rights.

  13. Meganucleases Revolutionize the Production of Genetically Engineered Pigs for the Study of Human Diseases.

    Science.gov (United States)

    Redel, Bethany K; Prather, Randall S

    2016-04-01

    Animal models of human diseases are critically necessary for developing an in-depth knowledge of disease development and progression. In addition, animal models are vital to the development of potential treatments or even cures for human diseases. Pigs are exceptional models as their size, physiology, and genetics are closer to that of humans than rodents. In this review, we discuss the use of pigs in human translational research and the evolving technology that has increased the efficiency of genetically engineering pigs. With the emergence of the clustered, regularly interspaced, short palindromic repeat (CRISPR)/CRISPR-associated (Cas) protein 9 system technology, the cost and time it takes to genetically engineer pigs has markedly decreased. We will also discuss the use of another meganuclease, the transcription activator-like effector nucleases , to produce pigs with severe combined immunodeficiency by developing targeted modifications of the recombination activating gene 2 (RAG2).RAG2mutant pigs may become excellent animals to facilitate the development of xenotransplantation, regenerative medicine, and tumor biology. The use of pig biomedical models is vital for furthering the knowledge of, and for treating human, diseases.

  14. Engineering antigen-specific T cells from genetically modified human hematopoietic stem cells in immunodeficient mice.

    Directory of Open Access Journals (Sweden)

    Scott G Kitchen

    Full Text Available There is a desperate need for effective therapies to fight chronic viral infections. The immune response is normally fastidious at controlling the majority of viral infections and a therapeutic strategy aimed at reestablishing immune control represents a potentially powerful approach towards treating persistent viral infections. We examined the potential of genetically programming human hematopoietic stem cells to generate mature CD8+ cytotoxic T lymphocytes that express a molecularly cloned, "transgenic" human anti-HIV T cell receptor (TCR. Anti-HIV TCR transduction of human hematopoietic stem cells directed the maturation of a large population of polyfunctional, HIV-specific CD8+ cells capable of recognizing and killing viral antigen-presenting cells. Thus, through this proof-of-concept we propose that genetic engineering of human hematopoietic stem cells will allow the tailoring of effector T cell responses to fight HIV infection or other diseases that are characterized by the loss of immune control.

  15. Tissue localization of human trefoil factors 1, 2, and 3

    DEFF Research Database (Denmark)

    Madsen, Jens; Nielsen, Ole; Tornøe, Ida

    2007-01-01

    pattern of the three trefoil factors analyzing mRNA from a panel of 20 human tissues by conventional reverse transcriptase (RT) PCR and, in addition, by real-time PCR. These findings were supported by immunohistochemical analysis of paraffin-embedded human tissues using rabbit polyclonal antibodies raised...... against these factors. TFF1 showed highest expression in the stomach and colon, whereas TFF2 and TFF3 showed highest expression in stomach and colon, respectively. All three TFFs were found in the ducts of pancreas. Whereas TFF2 was found to be restricted to these two tissues, the structurally more...... closely related TFF1 and TFF3 showed a more general tissue distribution and were found to colocalize on an array of mucosal surfaces. This is the first thorough parallel description of the tissue distribution of TFFs in normal tissues, and it provides a baseline for similar analysis in diseased tissues...

  16. The Partial Purification of Angiogenesis Factor of Human Osteosarcoma

    Institute of Scientific and Technical Information of China (English)

    WUHua; DENGZhongduan; 等

    2002-01-01

    Objective To partially purify the angiogenesis factor of human osteosarcoma(HuOs) and study its biological features. Methods The active peptide with a molecular weight of 8000-10000 Da in the conditioned medium obtained from the cultivation of Hu-Os cells(osteoblastic osteosarcoma) was partially purified by ultrafiltration, chromatography and dialysis.The angiogenic effects of the fractions were assessed by proliferation assay of human umbilical vein and pig thoracic aorta endothelial cells. Results The chromatography fractions 4-6 could significantly promote the proliferation of the endothelial cells.Conclusion The HuOs cells could synthesize and secrete angiogenesis factor with a molecular weight of 8000-10000 Da.

  17. Linking human factors to corporate strategy with cognitive mapping techniques.

    Science.gov (United States)

    Village, Judy; Greig, Michael; Salustri, Filippo A; Neumann, W Patrick

    2012-01-01

    For human factors (HF) to avoid being considered of "side-car" status, it needs to be positioned within the organization in such a way that it affects business strategies and their implementation. Tools are needed to support this effort. This paper explores the feasibility of applying a technique from operational research called cognitive mapping to link HF to corporate strategy. Using a single case study, a cognitive map is drawn to reveal the complex relationships between human factors and achieving an organization's strategic goals. Analysis of the map for central concepts and reinforcing loops enhances understanding that can lead to discrete initiatives to facilitate integration of HF. It is recommended that this technique be used with senior managers to understand the organizations` strategic goals and enhance understanding of the potential for HF to contribute to the strategic goals.

  18. DNA-binding specificities of human transcription factors.

    Science.gov (United States)

    Jolma, Arttu; Yan, Jian; Whitington, Thomas; Toivonen, Jarkko; Nitta, Kazuhiro R; Rastas, Pasi; Morgunova, Ekaterina; Enge, Martin; Taipale, Mikko; Wei, Gonghong; Palin, Kimmo; Vaquerizas, Juan M; Vincentelli, Renaud; Luscombe, Nicholas M; Hughes, Timothy R; Lemaire, Patrick; Ukkonen, Esko; Kivioja, Teemu; Taipale, Jussi

    2013-01-17

    Although the proteins that read the gene regulatory code, transcription factors (TFs), have been largely identified, it is not well known which sequences TFs can recognize. We have analyzed the sequence-specific binding of human TFs using high-throughput SELEX and ChIP sequencing. A total of 830 binding profiles were obtained, describing 239 distinctly different binding specificities. The models represent the majority of human TFs, approximately doubling the coverage compared to existing systematic studies. Our results reveal additional specificity determinants for a large number of factors for which a partial specificity was known, including a commonly observed A- or T-rich stretch that flanks the core motifs. Global analysis of the data revealed that homodimer orientation and spacing preferences, and base-stacking interactions, have a larger role in TF-DNA binding than previously appreciated. We further describe a binding model incorporating these features that is required to understand binding of TFs to DNA.

  19. Human factors issues for resolving adverse effects of human work underload and workload transitions in complex human-machine systems

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, T.G.

    1995-10-01

    A workshop was conducted whose specific purpose was to build on earlier work of the United States National Research Council, United States Federal government agencies, and the larger human factors community to: (1) clarify human factors issues pertaining to degraded performance in advanced human-machine systems (e.g., nuclear production, transportation, aerospace) due to human work underload and workload transition, and (2) develop strategies for resolving these issues. Recent history demonstrates that: (1) humans often react adversely to their diminishing roles in advanced human-machine systems, and therefore (2) new allocation models and strategies are required if humans are to be willing and able to assume diminishing and shifting roles assigned to them in these systems, and are to accept new technologies making up these systems. Problems associated with theses diminishing and shifting human roles are characterized as work underload and workload transitions. The workshop affirmed that: (1) work underload and workload transition are issues that will have to be addressed by designers of advanced human-machine systems, especially those relying on automation, if cost, performance, safety, and operator acceptability are to be optimized, (2) human machine allocation models, standards, and guidelines which go beyond simple capability approaches will be needed to preclude or seriously diminish the work underload and workload transition problems, and (3) the 16 workload definition, measurement, situational awareness, and trust issues identified during the workshop, need resolution if these models, standards, and guidelines are to be achieved.

  20. [Studies on genetic engineering of human insulin-purification and characterization of human proinsulin and insulin].

    Science.gov (United States)

    Guo, L H; Zhou, M Y; Shen, M H; Wang, E B; Liu, J F; Yu, Y J

    1992-06-01

    E. coli DH 5 alpha cells harboring a plasmid pWR 590-BCA 4 for fused human proinsulin production were cultured. The fused human proinsulin was isolated from the fermented cells and then subjected it to cleavage with BrCN. The cleaved product was then converted to crude proinsulin-S-sulfonate using oxidative sulfitolysis. The isolation of human proinsulin-S-sulfonate was accomplished by ion exchange chromatography on QAE-sephadex A-25, followed by gel filtration on sephadex G-50. The purified human proinsulin-S-sulfonate was folded using a disulfide interchange method. The folding mixture was then chromatographed on sephadex G-50 and purified proinsulin was obtained. The proinsulin was then converted to human insulin and C-peptide by a combination cleavage with trypsin and carboxypeptidase B. The total yield of human insulin was about 5 mg/L The Zinc insulin crystals were obtained with amorphous human insulin using citrate method. The amino acid composition N-terminal sequences as well as C-terminal amino acid residues are in agreement with expected results. The hypoglycemic activity of purified human insulin is 26-27 U/mg, as judged by mouse convulsion assay, and the RIA activity is about 99% of that of porcine insulin.