WorldWideScience

Sample records for human energy requirements

  1. Energy requirements

    NARCIS (Netherlands)

    Hulzebos, Christian V.; Sauer, Pieter J. J.

    2007-01-01

    The determination of the appropriate energy and nutritional requirements of a newborn infant requires a clear goal of the energy and other compounds to be administered, valid methods to measure energy balance and body composition, and knowledge of the neonatal metabolic capacities. Providing an appr

  2. Energy requirements

    NARCIS (Netherlands)

    Hulzebos, Christian V.; Sauer, Pieter J. J.

    The determination of the appropriate energy and nutritional requirements of a newborn infant requires a clear goal of the energy and other compounds to be administered, valid methods to measure energy balance and body composition, and knowledge of the neonatal metabolic capacities. Providing an

  3. Maintenance energy requirements of odor detection, explosive detection and human detection working dogs.

    Science.gov (United States)

    Mullis, Rebecca A; Witzel, Angela L; Price, Joshua

    2015-01-01

    Despite their important role in security, little is known about the energy requirements of working dogs such as odor, explosive and human detection dogs. Previous researchers have evaluated the energy requirements of individual canine breeds as well as dogs in exercise roles such as sprint racing. This study is the first to evaluate the energy requirements of working dogs trained in odor, explosive and human detection. This retrospective study evaluated twenty adult dogs who maintained consistent body weights over a six month period. During this time, the average energy consumption was [Formula: see text] or two times the calculated resting energy requirement ([Formula: see text]). No statistical differences were found between breeds, age or sex, but a statistically significant association (p = 0.0033, R-square = 0.0854) was seen between the number of searches a dog performs and their energy requirement. Based on this study's population, it appears that working dogs have maintenance energy requirements similar to the 1974 National Research Council's (NRC) maintenance energy requirement of [Formula: see text] (National Research Council (NRC), 1974) and the [Formula: see text] reported for young laboratory beagles (Rainbird & Kienzle, 1990). Additional research is needed to determine if these data can be applied to all odor, explosive and human detection dogs and to determine if other types of working dogs (tracking, search and rescue etc.) have similar energy requirements.

  4. Maintenance energy requirements of odor detection, explosive detection and human detection working dogs

    Directory of Open Access Journals (Sweden)

    Rebecca A. Mullis

    2015-02-01

    Full Text Available Despite their important role in security, little is known about the energy requirements of working dogs such as odor, explosive and human detection dogs. Previous researchers have evaluated the energy requirements of individual canine breeds as well as dogs in exercise roles such as sprint racing. This study is the first to evaluate the energy requirements of working dogs trained in odor, explosive and human detection. This retrospective study evaluated twenty adult dogs who maintained consistent body weights over a six month period. During this time, the average energy consumption was $136\\pm 38~\\mathrm{kcal}\\cdot {\\mathrm{BW}}_{\\mathrm{kg}}^{0.75}$136±38kcal⋅BWkg0.75 or two times the calculated resting energy requirement ($\\mathrm{RER}=70~\\mathrm{kcal}\\cdot {\\mathrm{BW}}_{\\mathrm{kg}}^{0.75}$RER=70kcal⋅BWkg0.75. No statistical differences were found between breeds, age or sex, but a statistically significant association (p = 0.0033, R-square = 0.0854 was seen between the number of searches a dog performs and their energy requirement. Based on this study’s population, it appears that working dogs have maintenance energy requirements similar to the 1974 National Research Council’s (NRC maintenance energy requirement of $132~\\mathrm{kcal}\\cdot {\\mathrm{BW}}_{\\mathrm{kg}}^{0.75}$132kcal⋅BWkg0.75 (National Research Council (NRC, 1974 and the $139\\pm 42~\\mathrm{kcal}\\cdot {\\mathrm{BW}}_{\\mathrm{kg}}^{0.75}$139±42kcal⋅BWkg0.75 reported for young laboratory beagles (Rainbird & Kienzle, 1990. Additional research is needed to determine if these data can be applied to all odor, explosive and human detection dogs and to determine if other types of working dogs (tracking, search and rescue etc. have similar energy requirements.

  5. Water and Energy Dietary Requirements and Endocrinology of Human Space Flight

    Science.gov (United States)

    Lane, Helen W.; Feeback, Daniel L.

    2002-01-01

    Fluid and energy metabolism and related endocrine changes have been studied nearly from the beginning of human space flight in association with short- and long-duration flights. Fluid and electrolyte nutrition status is affected by many factors including the microgravity environment, stress, changes in body composition, diet, exercise habits, sleep cycles, and ambient temperature and humidity conditions. Space flight exposes astronauts to all these factors and consequently poses significant challenges to establishing dietary water, sodium, potassium, and energy recommendations. The purpose of this article is to review the results of ground-based and space flight research studies that have led to current water, electrolyte, and energy dietary requirements for humans during space flight and to give an overview of related endocrinologic changes that have been observed in humans during short- and long-duration space flight.

  6. Legal Requirements for Human-Health based appeals of Wind Energy Projects in Ontario

    Directory of Open Access Journals (Sweden)

    Albert Michael Engel

    2014-12-01

    Full Text Available In 2009 the government of the province of Ontario, Canada passed new legislation to promote the development of renewable energy facilities, including wind energy facilities in the province. Throughout the legislative process, concerns were raised with respect to the effect of wind energy facilities on human health. Ultimately, the government established setbacks and sound level limits for wind energy facilities and provided Ontario residents with the right to appeal the approval of a wind energy facility on the ground that engaging in the facility in accordance with its approval will cause serious harm to human health. The first approval of a wind facility under the new legislation was issued in 2010 and since then, Ontario’s Environmental Review Tribunal as well as Ontario’s courts have been considering evidence proffered by appellants seeking revocation of approvals on the basis of serious harm to human health. To date, the evidence has been insufficient to support the revocation of a wind facility approval. This article reviews the legal basis for the dismissal of human-health based appeals.

  7. Legal Requirements for Human-Health Based Appeals of Wind Energy Projects in Ontario

    Science.gov (United States)

    Engel, Albert M.

    2014-01-01

    In 2009, the government of the province of Ontario, Canada passed new legislation to promote the development of renewable energy facilities, including wind energy facilities in the province. Throughout the legislative process, concerns were raised with respect to the effect of wind energy facilities on human health. Ultimately, the government established setbacks and sound level limits for wind energy facilities and provided Ontario residents with the right to appeal the approval of a wind energy facility on the ground that engaging in the facility in accordance with its approval will cause serious harm to human health. The first approval of a wind facility under the new legislation was issued in 2010 and since then, Ontario’s Environmental Review Tribunal as well as Ontario’s courts has been considering evidence proffered by appellants seeking revocation of approvals on the basis of serious harm to human health. To date, the evidence has been insufficient to support the revocation of a wind facility approval. This article reviews the legal basis for the dismissal of human-health based appeals. PMID:25520946

  8. Legal requirements for human-health based appeals of wind energy projects in ontario.

    Science.gov (United States)

    Engel, Albert M

    2014-01-01

    In 2009, the government of the province of Ontario, Canada passed new legislation to promote the development of renewable energy facilities, including wind energy facilities in the province. Throughout the legislative process, concerns were raised with respect to the effect of wind energy facilities on human health. Ultimately, the government established setbacks and sound level limits for wind energy facilities and provided Ontario residents with the right to appeal the approval of a wind energy facility on the ground that engaging in the facility in accordance with its approval will cause serious harm to human health. The first approval of a wind facility under the new legislation was issued in 2010 and since then, Ontario's Environmental Review Tribunal as well as Ontario's courts has been considering evidence proffered by appellants seeking revocation of approvals on the basis of serious harm to human health. To date, the evidence has been insufficient to support the revocation of a wind facility approval. This article reviews the legal basis for the dismissal of human-health based appeals.

  9. Human energy

    OpenAIRE

    2010-01-01

    In the midst of big-oil record profits and growing debate on global warming, the Chevron Corporation launched its “Human Energy” public relations campaign. In television commercials and print advertisements, Chevron portrays itself as a compassionate entity striving to solve the planet’s energy crisis. Yet, the first term in this corporate oxymoron misleadingly reframes the significance of the second, suggesting that the corporation has a renewed focus. In depicting Chevron as a green/human o...

  10. Energy intake from human milk covers the requirement of 6-month-old Senegalese exclusively breast-fed infants.

    Science.gov (United States)

    Agne-Djigo, Anta; Kwadjode, Komlan M; Idohou-Dossou, Nicole; Diouf, Adama; Guiro, Amadou T; Wade, Salimata

    2013-11-01

    Exclusive breast-feeding until 6 months is advised by the WHO as the best practice to feed infants. Yet, some studies have suggested a gap between energy requirements and the energy provided by human milk for many infants at 6 months. In order to assess the adequacy of WHO recommendations in 6-month-old Senegalese lactating infants, a comprehensive study was designed to measure human milk intake by the dose-to-the mother 2H2O turnover method. Infants’ energy intakes were calculated using daily breast milk intake and the energy content of milk was estimated on the basis of creamatocrit. Of the fifty-nine mother–infant pairs enrolled, fifteen infants were exclusively breast-fed (Ex) while forty-four were partially breast-fed (Part). Infants’ breast milk intake was significantly higher in the Ex group (993 (SD 135) g/d, n 15) compared with the Part group (828 (SD 222) g/d, n 44, P¼0·009). Breast milk energy content as well as infants' growth was comparable in both groups. However, infants’ energy intake from human milk was significantly higher (364 (SD 50) kJ/kg per d (2586 (SD 448) kJ/d)) in the Ex group than in the Part group (289 (SD 66) kJ/kg per d (2150 (SD 552) kJ/d), P,0·01). Compared with WHO recommendations, the results demonstrate that energy intake from breast milk was low in partially breast-fed infants while exclusively breast-fed 6-month-old Senegalese infants received adequate energy from human milk alone, the most complete food for infants. Therefore, advocacy of exclusive breast-feeding until 6 months should be strengthened.

  11. Energy Consumption vs. Energy Requirement

    Science.gov (United States)

    Fan, L. T.; Zhang, Tengyan; Schlup, John R.

    2006-01-01

    Energy is necessary for any phenomenon to occur or any process to proceed. Nevertheless, energy is never consumed; instead, it is conserved. What is consumed is available energy, or exergy, accompanied by an increase in entropy. Obviously, the terminology, "energy consumption" is indeed a misnomer although it is ubiquitous in the…

  12. Metabolic energy is required in human platelets at any stage during optical aggregation and secretion

    NARCIS (Netherlands)

    Akkerman, Jan Willem N.; Verhoeven, A.J.M.; Mommersteeg, M.E.

    1984-01-01

    The relationship between metabolic energy and platelet aggregation and secretion was investigated by sudden exhaustion of the cell energy content after these platelet responses had been initiated. In normal platelets, optical aggregation was at any stage susceptible to energy exhaustion, whereas sin

  13. Energy requirements of adult cats.

    Science.gov (United States)

    Bermingham, Emma N; Thomas, David G; Morris, Penelope J; Hawthorne, Amanda J

    2010-04-01

    A meta-analysis was carried out in order to establish the energy requirements of adult cats. Publications that identified cat body weight (BW) were used to generate allometric relationships between energy requirements and BW of healthy adult cats, using log-log linear regression. Energy requirements were expressed in kcal/kg BW to be consistent with those reported by the National Research Council. Mean maintenance energy requirements were 55.1 (se 1.2) kcal/kg BW (115 treatment groups). Three allometric equations were identified to predict the energy requirements for maintenance of BW in the cat based on BW: light (53.7 kcal/kg BW- 1.061), normal (46.8 kcal/kg BW- 1.115) and heavy (131.8 kcal/kg BW- 0 .366). When reported on lean mass, the allometric equation revealed maintenance requirements were 58.4 kcal/kg lean mass- 1.140 (adjusted R2 0.694; thirty-six treatment groups). The present review suggests that values for maintenance energy requirements based on BW alone may not be an accurate prediction and more detailed information on the age, sex and neuter status, BW and composition would enhance the ability to interpret the maintenance energy requirements of cats.

  14. Fusion Energy Sciences Network Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Dart, Eli [ESNet, Berkeley, CA (United States); Tierney, Brian [ESNet, Berkeley, CA (United States)

    2012-09-26

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 25 years. In December 2011, ESnet and the Office of Fusion Energy Sciences (FES), of the DOE Office of Science (SC), organized a workshop to characterize the networking requirements of the programs funded by FES. The requirements identified at the workshop are summarized in the Findings section, and are described in more detail in the body of the report.

  15. Energy metabolism during human pregnancy.

    Science.gov (United States)

    Forsum, Elisabet; Löf, Marie

    2007-01-01

    This review summarizes information regarding how human energy metabolism is affected by pregnancy, and current estimates of energy requirements during pregnancy are presented. Such estimates can be calculated using either increases in basal metabolic rate (BMR) or increases in total energy expenditure (TEE). The two modes of calculation give similar results for a complete pregnancy but different distributions of energy requirements in the three trimesters. Recent information is presented regarding the effect of pregnancy on BMR, TEE, diet-induced thermogenesis, and physical activity. The validity of energy intake (EI) data recently assessed in well-nourished pregnant women was evaluated using information regarding energy metabolism during pregnancy. The results show that underreporting of EI is common during pregnancy and indicate that additional longitudinal studies, taking the total energy budget during pregnancy into account, are needed to satisfactorily define energy requirements during the three trimesters of gestation.

  16. Superluminal travel requires negative energies

    OpenAIRE

    Olum, Ken D.

    1998-01-01

    I investigate the relationship between faster-than-light travel and weak-energy-condition violation, i.e., negative energy densities. In a general spacetime it is difficult to define faster-than-light travel, and I give an example of a metric which appears to allow superluminal travel, but in fact is just flat space. To avoid such difficulties, I propose a definition of superluminal travel which requires that the path to be traveled reach a destination surface at an earlier time than any neig...

  17. Food-related energy requirements.

    Science.gov (United States)

    Hirst, E

    1974-04-12

    I have used data from input-output studies to determine the quantities of primary and electric energy consumed in the agricultural, processing, transportation, wholesale and retail trade, and household sectors for personal consumption of food. Before one draws conclusions from these results, it is important to note the assumptions and approximations used in this analysis. First, the economic input-output data published by the Department of Commerce are subject to a number of inaccuracies, including lack of complete coverage for an industry, restriction of data for proprietary reasons, and use of different time periods for different data. Second, aggregation can combine within the same sector industries whose energy intensities differ widely. For example, eating and drinking establishments probably consume more energy per dollar of sales (because of refrigerators, stoves, and freezers) than do department stores. However, both types of establishment are included in retail trade. Thus energy use for food-related retail trade may be underestimated because of aggregation. Third, the energy coefficients are subject to error. In particular, the coefficients for the agricultural and trade sectors are vulnerable because energy use within these sectors is not well documented. Finally, the scaling factor used to estimate food-related energy use for the 1960's is approximate, in that it neglects the possibility that these energy coefficients changed differently with time. Because of these limitations, which are described more fully by Herendeen (6), a number of important issues were not addressed here. such as relative energy requirements for fresh, frozen, and canned vegetables; and for soybeans as compared to beef. This analysis shows that the U.S. food cycle consumes a considerable amount of energy, about 12 percent of the total national energy budget. The residential sector, which accounts for 30 percent of the total, is the most energy-intensive sector in terms of energy

  18. Human Systems Integration Requirements

    Science.gov (United States)

    2009-09-01

    Performance Parameter (NR-KPP) Products (aka Architectures )  Appendix B: References  Appendix C: Acronym List  Appendix D: Analysis methodology...Force Specialty Codes 36 HSI REQUIREMENTS GUIDE Universal Joint Task List Full Mission Trainers ( FMT ) Field Training Detachments On-the-Job...Occupational Health F3I Form-Fit-Function Interface FM Field Manual FMT Full Mission Trainers FOA Field Operating Agencies FOC Full Operational

  19. Towards standardising building rural clinics: energy requirements

    CSIR Research Space (South Africa)

    Szewczuk, S

    2015-03-01

    Full Text Available (brick and mortar) and Innovative Building Technologies (IBTs) and alternative off-grid services technologies (energy, water, and sanitation). The paper discusses the energy requirements of a conceptual design for a generic, basic rural clinic....

  20. The strictest energy requirements in the world

    DEFF Research Database (Denmark)

    Lauridsen, Erik Hagelskjær; Jensen, Jens Stissing

    2013-01-01

    50 years of progressively strengthened energy requirements in the Danish building code appear to be a success, as the energy consumption has remained constant despite an increase in the total area in requirement of heating. This article however argues that the building code mechanism is heavily i...

  1. Energy requirements of infants, children and adolescents

    Science.gov (United States)

    Energy requirements of infants, children and adolescents are defined as the amount of energy needed to balance total energy expenditure (TEE) at a desirable level of physical activity, and to support optimal growth and development consistent with long-term health. The latest FAO/WHO/UNU recommendati...

  2. Analysis of the energy requirement for household consumption

    NARCIS (Netherlands)

    Vringer, Kees

    2005-01-01

    Humans in households use energy for their activities. This use is both direct, for example electricity and natural gas, but also indirect, for the production, transport and trade of other goods and services. The main objective of this thesis is to gain insight into the energy requirement associated

  3. Energy requirements of children with cerebral palsy.

    Science.gov (United States)

    Hogan, S Eileen

    2004-01-01

    Energy requirements of children and adolescents with cerebral palsy appear to be disease-specific and different from the current recommendations for healthy children, varying depending upon functional capacity, degree of mobility, severity of disease, and level of altered metabolism. Feeding problems are prevalent in many of these children, and can result in inadequate energy intake. Wasting of voluntary muscles, a common symptom of cerebral palsy, contributes to reduced resting energy needs; nevertheless, the location of the central nervous system lesion may also influence energy requirements. To guarantee individualized, accurate, and optimal energy recommendations for this population, resting energy expenditure should preferentially be measured by indirect calorimetry. Equations and formulae to predict healthy people's resting energy expenditure are available, but tend to overestimate these children's energy needs. Future studies should address the role of the central nervous system in regulating energy metabolism in this population. When adequately nourished, children and adolescents with cerebral palsy appear more tranquil and require decreased feeding time, which gives caregivers time to develop the child's functional independence and character. Understanding energy requirements of this population will provide caregivers and health professionals with guidelines for providing optimal nutritional status.

  4. Nuclear Power and the World's Energy Requirements

    CERN Document Server

    Castellano, V; Dunning-Davies, J

    2004-01-01

    The global requirements for energy are increasing rapidly as the global population increases and the under-developed nations become more advanced. The traditional fuels used in their traditional ways will become increasingly unable to meet the demand. The need for a review of the energy sources available is paramount, although the subsequent need to develop a realistic strategy to deal with all local and global energy requirements is almost as important. Here attention will be restricted to examining some of the claims and problems of using nuclear power to attempt to solve this major question.

  5. Integrating Renewable Energy Requirements Into Building Energy Codes

    Energy Technology Data Exchange (ETDEWEB)

    Kaufmann, John R.; Hand, James R.; Halverson, Mark A.

    2011-07-01

    This report evaluates how and when to best integrate renewable energy requirements into building energy codes. The basic goals were to: (1) provide a rough guide of where we’re going and how to get there; (2) identify key issues that need to be considered, including a discussion of various options with pros and cons, to help inform code deliberations; and (3) to help foster alignment among energy code-development organizations. The authors researched current approaches nationally and internationally, conducted a survey of key stakeholders to solicit input on various approaches, and evaluated the key issues related to integration of renewable energy requirements and various options to address those issues. The report concludes with recommendations and a plan to engage stakeholders. This report does not evaluate whether the use of renewable energy should be required on buildings; that question involves a political decision that is beyond the scope of this report.

  6. Energy Cost Impact of Non-Residential Energy Code Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jian; Hart, Philip R.; Rosenberg, Michael I.

    2016-08-22

    The 2012 International Energy Conservation Code contains 396 separate requirements applicable to non-residential buildings; however, there is no systematic analysis of the energy cost impact of each requirement. Consequently, limited code department budgets for plan review, inspection, and training cannot be focused on the most impactful items. An inventory and ranking of code requirements based on their potential energy cost impact is under development. The initial phase focuses on office buildings with simple HVAC systems in climate zone 4C. Prototype building simulations were used to estimate the energy cost impact of varying levels of non-compliance. A preliminary estimate of the probability of occurrence of each level of non-compliance was combined with the estimated lost savings for each level to rank the requirements according to expected savings impact. The methodology to develop and refine further energy cost impacts, specific to building type, system type, and climate location is demonstrated. As results are developed, an innovative alternative method for compliance verification can focus efforts so only the most impactful requirements from an energy cost perspective are verified for every building and a subset of the less impactful requirements are verified on a random basis across a building population. The results can be further applied in prioritizing training material development and specific areas of building official training.

  7. Comparison of energy performance requirements levels

    DEFF Research Database (Denmark)

    Spiekman, Marleen; Thomsen, Kirsten Engelund; Rose, Jørgen

    This summary report provides a synthesis of the work within the EU SAVE project ASIEPI on developing a method to compare the energy performance (EP) requirement levels among the countries of Europe. Comparing EP requirement levels constitutes a major challenge. From the comparison of for instance...... the present Dutch requirement level (EPC) of 0,8 with the present Flemish level of E80, it can easily be seen that direct comparison is not possible. The conclusions and recommendations of the study are presented in part A. These constitute the most important result of the project. Part B gives an overview...

  8. Requirements for very high energy accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Richter, B.

    1985-04-01

    In this introductory paper at the second Workshop on Laser Acceleration my main goal is to set what I believe to be the energy and luminosity requirements of the machines of the future. These specifications are independent of the technique of accelerations. But, before getting to these technical questions, I will briefly review where we are in particle physics, for it is the large number of unanswered questions in physics that motivates the search for effective accelerators.

  9. Infrared thermography requirements study for energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Headley, R B; Larsen, R J; Goldberg, G G; Boyd, R J

    1977-04-01

    A description is given of a study to identify users (and their needs) of infrared (IR) instrumentation that may be applicable in the measurement of heat gains and/or losses from buildings, and to identify research, development and demonstration opportunities. The study is intended to provide the following information: (1) identify present and potential users and uses of infrared thermographic technology as related to energy conservation in buildings; (2) identify presently available IR thermographic instrumentation, techniques, and services, and determine how well it can serve the users and uses identified above; and (3) identify the technical opportunities for research, development, and demonstration on new IR thermographic technology that will better serve the users and uses identified above. The building sector requirements were analyzed, the user measurement requirements were identified, and cost guidelines for instrumentation are provided. An analysis is given of the constraints, requirements, and limitations of measurable parameters. This analysis provides the basis against which an IR instrument survey was conducted. The building sector requirements study indicates the general satisfaction of the user community with the use of IR thermography for qualitative evaluation of heat loss from buildings.

  10. Chipping machines: disc and drum energy requirements

    Directory of Open Access Journals (Sweden)

    Alessio Facello

    2013-09-01

    Full Text Available Air pollution and fossil fuel reserves exhaustion are increasing the importance of the biomass-derived products, in particular wood, as source of clean and renewable energy for the production of electricity or steam. In order to improve the global efficiency and the entire production chain, we have to evaluate the energetic aspects linked to the process of transformation, handling and transport of these materials. This paper reports results on a comparison between two chippers of similar size using different cutting technology: disc and drum tool respectively. During trials, fuel consumption, PTO torque and speed, processing time and weight of processed material were recorded. Power demand, fuel consumption, specific energy and productivity were computed. The machine was fed with four different feedstock types (chestnut logs, poplar logs, poplar branches, poplar sawmill residues. 15 repetitions for each combination of feedstock-tool were carried out. The results of this study show that the disc tool requires, depending on the processed material, from 12 to 18% less fuel per unit of material processed than the drum tool, and consequently, from 12 to 16% less specific energy. In particular, the highest difference between tools was found in branches processing whereas the smallest was in poplar logs. Furthermore the results of the investigation indicate, that, in testing conditions, the productivity of drum tool is higher (8% than disc tool.

  11. Specific energy requirement for compacting corn stover.

    Science.gov (United States)

    Mani, Sudhagar; Tabil, Lope G; Sokhansanj, Shahab

    2006-08-01

    Corn stover is a major crop residue for biomass conversion to produce chemicals and fuels. One of the problems associated with the supply of corn stover to conversion plants is the delivery of feedstock at a low cost. Corn stover has low bulk density and it is difficult to handle. In this study, chopped corn stover samples were compacted in a piston cylinder under three pressure levels (5, 10, 15 MPa) and at three moisture content levels (5%, 10%, 15% (wb)) to produce briquettes. The total energy requirement to compress and extrude briquette ranged from 12 to 30 MJ/t. The briquette density ranged from 650 to 950 kg/m3 increasing with pressure. Moisture content had also a significant effect on briquette density, durability and stability. Low moisture stover (5-10%) resulted in denser, more stable and more durable briquettes than high moisture stover (15%).

  12. Minimum Energy Requirements in Complex Distillation Arrangements

    Energy Technology Data Exchange (ETDEWEB)

    Halvorsen, Ivar J.

    2001-07-01

    Distillation is the most widely used industrial separation technology and distillation units are responsible for a significant part of the total heat consumption in the world's process industry. In this work we focus on directly (fully thermally) coupled column arrangements for separation of multicomponent mixtures. These systems are also denoted Petlyuk arrangements, where a particular implementation is the dividing wall column. Energy savings in the range of 20-40% have been reported with ternary feed mixtures. In addition to energy savings, such integrated units have also a potential for reduced capital cost, making them extra attractive. However, the industrial use has been limited, and difficulties in design and control have been reported as the main reasons. Minimum energy results have only been available for ternary feed mixtures and sharp product splits. This motivates further research in this area, and this thesis will hopefully give some contributions to better understanding of complex column systems. In the first part we derive the general analytic solution for minimum energy consumption in directly coupled columns for a multicomponent feed and any number of products. To our knowledge, this is a new contribution in the field. The basic assumptions are constant relative volatility, constant pressure and constant molar flows and the derivation is based on Underwood's classical methods. An important conclusion is that the minimum energy consumption in a complex directly integrated multi-product arrangement is the same as for the most difficult split between any pair of the specified products when we consider the performance of a conventional two-product column. We also present the Vmin-diagram, which is a simple graphical tool for visualisation of minimum energy related to feed distribution. The Vmin-diagram provides a simple mean to assess the detailed flow requirements for all parts of a complex directly coupled arrangement. The main purpose in

  13. Chocolate Bars Based on Human Nutritional Requirements

    OpenAIRE

    Robson, Anthony,

    2013-01-01

    International audience; Key Points * The nutritional value of chocolate bars should be based on the nutritional value of the low energy dense late Paleolithic human diet to help reduce mental ill health, obesity, and other postprandial insults. * Current chocolate bars have a high energy density (>2 kcal/g). * Cocoa can be sweetened by the addition of calorie-free Purefruit™ (Tate & Lyle) monk fruit ( Siraitia grosvenorii ) extract. PUREFRUIT™ is approximately 200 times sweeter than sugar and...

  14. Chocolate Bars Based on Human Nutritional Requirements

    OpenAIRE

    Robson, Anthony,

    2013-01-01

    International audience; Key Points * The nutritional value of chocolate bars should be based on the nutritional value of the low energy dense late Paleolithic human diet to help reduce mental ill health, obesity, and other postprandial insults. * Current chocolate bars have a high energy density (>2 kcal/g). * Cocoa can be sweetened by the addition of calorie-free Purefruit™ (Tate & Lyle) monk fruit ( Siraitia grosvenorii ) extract. PUREFRUIT™ is approximately 200 times sweeter than sugar and...

  15. 24 CFR 965.302 - Requirements for energy audits.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Requirements for energy audits. 965... URBAN DEVELOPMENT PHA-OWNED OR LEASED PROJECTS-GENERAL PROVISIONS Energy Audits and Energy Conservation Measures § 965.302 Requirements for energy audits. All PHAs shall complete an energy audit for each...

  16. Energy requirements for waste water treatment.

    Science.gov (United States)

    Svardal, K; Kroiss, H

    2011-01-01

    The actual mathematical models describing global climate closely link the detected increase in global temperature to anthropogenic activity. The only energy source we can rely on in a long perspective is solar irradiation which is in the order of 10,000 kW/inhabitant. The actual primary power consumption (mainly based on fossil resources) in the developed countries is in the range of 5 to 10 kW/inhabitant. The total power contained in our nutrition is in the range of 0.11 kW/inhabitant. The organic pollution of domestic waste water corresponds to approximately 0.018 kW/inhabitant. The nutrients contained in the waste water can also be converted into energy equivalents replacing market fertiliser production. This energy equivalent is in the range of 0.009 kW/inhabitant. Hence waste water will never be a relevant source of energy as long as our primary energy consumption is in the range of several kW/inhabitant. The annual mean primary power demand of conventional municipal waste water treatment with nutrient removal is in the range of 0.003-0.015 kW/inhabitant. In principle it is already possible to reduce this value for external energy supply to zero. Such plants should be connected to an electrical grid in order to keep investment costs low. Peak energy demand will be supported from the grid and surplus electric energy from the plant can be is fed to the grid. Zero 'carbon footprint' will not be affected by this solution. Energy minimisation must never negatively affect treatment efficiency because water quality conservation is more important for sustainable development than the possible reduction in energy demand. This argument is strongly supported by economical considerations as the fixed costs for waste water infrastructure are dominant.

  17. Companies' human capital required for collaboration

    DEFF Research Database (Denmark)

    Albats, Ekaterina; Bogers, Marcel; Podmetina, Daria

    building, relationship building, IPR management and negotiation for the context of collaboration with universities. Our research has revealed an importance of expectation management skills for university-industry collaboration (UIC) context. We found that human capital for UIC is to be continuously......Universities are widely acknowledged as an important source of knowledge for corporate innovation, and collaboration with universities plays an important role in companies’ open innovation strategy. However, little is known about the human capital components required for collaboration...... with universities. Analysing the results of the survey among over 500 company managers we define the universal employees’ skills required for company’ successful collaborations with external stakeholders. Then through analysing qualitative interviews data we distinguish between these skills and capabilities...

  18. Canadian Ranger Rifle: Human Factors Requirements Validation

    Science.gov (United States)

    2010-08-01

    nation building through programs such as the Junior Canadian Rangers ( JCR )6. Other tasks of the CR include providing local expertise, guidance, and...Requirements FN Fabrique Nationale HF Human Factors HSI Humansystems® Incorporated JCR Junior Canadian Rangers MOTS Military off the Shelf NATO...support the Junior Canadian Rangers ( JCR ) Program, which helps to achieve national and territorial goals through nation building. DEFICIENCY

  19. Cost optimal levels for energy performance requirements

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Aggerholm, Søren; Kluttig-Erhorn, Heike;

    This report summarises the work done within the Concerted Action EPBD from December 2010 to April 2011 in order to feed into the European Commission's proposal for a common European procedure for a Cost-Optimal methodology under the Directive on the Energy Performance of Buildings (recast) 2010/3...

  20. Comparison of energy performance requirements levels

    DEFF Research Database (Denmark)

    Spiekman, Marleen; Thomsen, Kirsten Engelund; Rose, Jørgen;

    the present Dutch requirement level (EPC) of 0,8 with the present Flemish level of E80, it can easily be seen that direct comparison is not possible. The conclusions and recommendations of the study are presented in part A. These constitute the most important result of the project. Part B gives an overview...

  1. Energy enters guilty plea. [Department of Energy human experimentation

    Energy Technology Data Exchange (ETDEWEB)

    Makhijani, A. (Institute for Energy and Environmental Research, Takoma Park, MD (United States))

    This article discusses the history leading up to the admission from Energy Secretary Hazel O'Leary that the Energy Department had conducted secret, dangerous, and immoral experiments on the American people. The article describes some of the experimentation on human subjects, attempts to identify the rationale behind exposing human subjects to radiation, and discusses the lack of ethics displayed by the Energy Department in both its experimentation and in its analysis of results. 16 refs.

  2. Energy requirements of adult dogs: a meta-analysis.

    Directory of Open Access Journals (Sweden)

    Emma N Bermingham

    Full Text Available A meta-analysis was conducted to determine the maintenance energy requirements of adult dogs. Suitable publications were first identified, and then used to generate relationships amongst energy requirements, husbandry, activity level, methodology, sex, neuter status, dog size, and age in healthy adult dogs. Allometric equations for maintenance energy requirements were determined using log-log linear regression. So that the resulting equations could readily be compared with equations reported by the National Research Council, maintenance energy requirements in the current study were determined in kcal/kg(0.75 body weight (BW. Ultimately, the data of 70 treatment groups from 29 publications were used, and mean (± standard deviation maintenance energy requirements were 142.8±55.3 kcal·kgBW(-0.75·day(-1. The corresponding allometric equation was 81.5 kcal·kgBW(-0.9·day(-1 (adjusted R2 = 0.64; 70 treatment groups. Type of husbandry had a significant effect on maintenance energy requirements (P<0.001: requirements were greatest in racing dogs, followed by working dogs and hunting dogs, whilst the energy requirements of pet dogs and kennel dogs were least. Maintenance energy requirements were less in neutered compared with sexually intact dogs (P<0.001, but there was no effect of sex. Further, reported activity level tended to effect the maintenance energy requirement of the dog (P = 0.09. This review suggests that estimating maintenance energy requirements based on BW alone may not be accurate, but that predictions that factor in husbandry, neuter status and, possibly, activity level might be superior. Additionally, more information on the nutrient requirements of older dogs, and those at the extremes of body size (i.e. giant and toy breeds is needed.

  3. Stakeholder requirements for commercially successful wave energy converter farms

    Energy Technology Data Exchange (ETDEWEB)

    Babarit, Aurélien; Bull, Diana; Dykes, Katherine; Malins, Robert; Nielsen, Kim; Costello, Ronan; Roberts, Jesse; Bittencourt Ferreira, Claudio; Kennedy, Ben; Weber, Jochem

    2017-12-01

    In this study, systems engineering techniques are applied to wave energy to identify and specify stakeholders' requirements for a commercially successful wave energy farm. The focus is on the continental scale utility market. Lifecycle stages and stakeholders are identified. Stakeholders' needs across the whole lifecycle of the wave energy farm are analyzed. A list of 33 stakeholder requirements are identified and specified. This list of requirements should serve as components of a technology performance level metric that could be used by investors and funding agencies to make informed decisions when allocating resources. It is hoped that the technology performance level metric will accelerate wave energy conversion technology convergence.

  4. Energy requirements and CO2 mitigation potential of PV systems

    NARCIS (Netherlands)

    Alsema, E.A.

    2006-01-01

    In this paper we investigate the energy requirements of PV modules and systems and calculate the Energy Pay-Back Time for two major PV applications. Based on a review of past energy analysis studies we explain the main sources of differences and establish a "best estimate" for key system components.

  5. Physical and energy requirements of competitive swimming events.

    Science.gov (United States)

    Pyne, David B; Sharp, Rick L

    2014-08-01

    The aquatic sports competitions held during the summer Olympic Games include diving, open-water swimming, pool swimming, synchronized swimming, and water polo. Elite-level performance in each of these sports requires rigorous training and practice to develop the appropriate physiological, biomechanical, artistic, and strategic capabilities specific to each sport. Consequently, the daily training plans of these athletes are quite varied both between and within the sports. Common to all aquatic athletes, however, is that daily training and preparation consumes several hours and involves frequent periods of high-intensity exertion. Nutritional support for this high-level training is a critical element of the preparation of these athletes to ensure the energy and nutrient demands of the training and competition are met. In this article, we introduce the fundamental physical requirements of these sports and specifically explore the energetics of human locomotion in water. Subsequent articles in this issue explore the specific nutritional requirements of each aquatic sport. We hope that such exploration will provide a foundation for future investigation of the roles of optimal nutrition in optimizing performance in the aquatic sports.

  6. Primate energy input and the evolutionary transition to energy-dense diets in humans.

    Science.gov (United States)

    Simmen, Bruno; Pasquet, Patrick; Masi, Shelly; Koppert, Georgius J A; Wells, Jonathan C K; Hladik, Claude Marcel

    2017-06-14

    Humans and other large-brained hominins have been proposed to increase energy turnover during their evolutionary history. Such increased energy turnover is plausible, given the evolution of energy-rich diets, but requires empirical confirmation. Framing human energetics in a phylogenetic context, our meta-analysis of 17 wild non-human primate species shows that daily metabolizable energy input follows an allometric relationship with body mass where the allometric exponent for mass is 0.75 ± 0.04, close to that reported for daily energy expenditure measured with doubly labelled water in primates. Human populations at subsistence level (n = 6) largely fall within the variation of primate species in the scaling of energy intake and therefore do not consume significantly more energy than predicted for a non-human primate of equivalent mass. By contrast, humans ingest a conspicuously lower mass of food (-64 ± 6%) compared with primates and maintain their energy intake relatively more constantly across the year. We conclude that our hominin hunter-gatherer ancestors did not increase their energy turnover beyond the allometric relationship characterizing all primate species. The reduction in digestive costs due to consumption of a lower mass of high-quality food, as well as stabilization of energy supply, may have been important evolutionary steps enabling encephalization in the absence of significantly raised energy intakes. © 2017 The Author(s).

  7. Energy requirements of adult dogs: a meta-analysis.

    Science.gov (United States)

    Bermingham, Emma N; Thomas, David G; Cave, Nicholas J; Morris, Penelope J; Butterwick, Richard F; German, Alexander J

    2014-01-01

    A meta-analysis was conducted to determine the maintenance energy requirements of adult dogs. Suitable publications were first identified, and then used to generate relationships amongst energy requirements, husbandry, activity level, methodology, sex, neuter status, dog size, and age in healthy adult dogs. Allometric equations for maintenance energy requirements were determined using log-log linear regression. So that the resulting equations could readily be compared with equations reported by the National Research Council, maintenance energy requirements in the current study were determined in kcal/kg(0.75) body weight (BW). Ultimately, the data of 70 treatment groups from 29 publications were used, and mean (± standard deviation) maintenance energy requirements were 142.8±55.3 kcal·kgBW(-0.75)·day(-1). The corresponding allometric equation was 81.5 kcal·kgBW(-0.9)·day(-1) (adjusted R2 = 0.64; 70 treatment groups). Type of husbandry had a significant effect on maintenance energy requirements (PMaintenance energy requirements were less in neutered compared with sexually intact dogs (Pmaintenance energy requirement of the dog (P = 0.09). This review suggests that estimating maintenance energy requirements based on BW alone may not be accurate, but that predictions that factor in husbandry, neuter status and, possibly, activity level might be superior. Additionally, more information on the nutrient requirements of older dogs, and those at the extremes of body size (i.e. giant and toy breeds) is needed.

  8. Requiring human papillomavirus vaccine for immigrant women.

    Science.gov (United States)

    Hachey, Krista J; Allen, Rebecca H; Nothnagle, Melissa; Boardman, Lori A

    2009-11-01

    The Centers for Disease Control and Prevention Advisory Committee on Immunization Practices recommends human papillomavirus (HPV) vaccination of 11- to 12-year-old girls, with catch-up vaccination for girls and women aged 13 to 26 years. Although compulsory HPV vaccination is not currently mandated for any U.S. population, immigrant women aged 11-26 years are now required to receive the first injection of the vaccine (the full series consists of three doses) as a result of the 1996 Illegal Immigration Reform and Immigrant Responsibility Act. According to this law, immigrants applying for visas to enter the United States or to adjust their immigration status must receive the inoculations that the Advisory Committee on Immunization Practices recommends for U.S. residents. In the case of HPV, this law represents not only an undue burden on immigrant women, but also raises scientific and ethical questions regarding the benefit of vaccination in this population. Given these issues, immigrant women should not be required to provide documentation of HPV vaccination at the time of visa application or adjustment of immigration status.

  9. Implementation of Energy Code Controls Requirements in New Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, Michael I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, Philip R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hatten, Mike [Solarc Energy Group, LLC, Seattle, WA (United States); Jones, Dennis [Group 14 Engineering, Inc., Denver, CO (United States); Cooper, Matthew [Group 14 Engineering, Inc., Denver, CO (United States)

    2017-03-24

    Most state energy codes in the United States are based on one of two national model codes; ANSI/ASHRAE/IES 90.1 (Standard 90.1) or the International Code Council (ICC) International Energy Conservation Code (IECC). Since 2004, covering the last four cycles of Standard 90.1 updates, about 30% of all new requirements have been related to building controls. These requirements can be difficult to implement and verification is beyond the expertise of most building code officials, yet the assumption in studies that measure the savings from energy codes is that they are implemented and working correctly. The objective of the current research is to evaluate the degree to which high impact controls requirements included in commercial energy codes are properly designed, commissioned and implemented in new buildings. This study also evaluates the degree to which these control requirements are realizing their savings potential. This was done using a three-step process. The first step involved interviewing commissioning agents to get a better understanding of their activities as they relate to energy code required controls measures. The second involved field audits of a sample of commercial buildings to determine whether the code required control measures are being designed, commissioned and correctly implemented and functioning in new buildings. The third step includes compilation and analysis of the information gather during the first two steps. Information gathered during these activities could be valuable to code developers, energy planners, designers, building owners, and building officials.

  10. Introducing cost-optimal levels for energy requirements

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne; Thomsen, Kirsten Engelund

    2012-01-01

    The recast of the Directive on the Energy Performance of Buildings (EPBD) states that Member States (MS) must ensure that minimum energy performance requirements for buildings are set “with a view to achieve cost-optimal levels”, and that the cost-optimal level must be calculated in accordance wi...

  11. Introducing cost-optimal levels for energy requirements

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne; Thomsen, Kirsten Engelund

    2012-01-01

    The recast of the Directive on the Energy Performance of Buildings (EPBD) states that Member States (MS) must ensure that minimum energy performance requirements for buildings are set “with a view to achieve cost-optimal levels”, and that the cost-optimal level must be calculated in accordance...... with a comparative methodology. The ultimate goal of this is to achieve a cost-optimal improvement of buildings’ energy performance (new and existing) in reality....

  12. At the Limit: Introducing Energy with Human Senses

    Science.gov (United States)

    Stinken, Lisa; Heusler, Stefan; Carmesin, Hans-Otto

    2016-12-01

    Energy belongs to the core ideas of the physics curriculum. But at the same time, energy is one of the most complex topics in science education since it occurs in multiple ways, such as motion, sound, light, and thermal energy. It can neither be destroyed nor created, but only converted. Due to the variety of relevant scales and abstractness of the term energy, the question arises how to introduce energy at the introductory physics level. The aim of this article is to demonstrate how the concept of energy can become meaningful in the context of the human senses. Three simple experiments to investigate the minimal amount of energy that is required to generate a sensory perception are presented. In this way students can learn that even different sensory perceptions can be compared by using energy as the unifying concept.

  13. Energy storage specification requirements for hybrid-electric vehicle

    Science.gov (United States)

    Burke, A. F.

    1993-09-01

    A study has been made of energy storage unit requirements for hybrid-electric vehicles. The drivelines for these vehicles included both primary energy storage units and/or pulse power units. The primary energy storage units were sized to provide 'primary energy' ranges up to 60 km. The total power capability of the drivelines were such that the vehicles had 0 to 100 km/h acceleration times of 10 to 12 s. The power density requirements for primary energy storage devices to be used in hybrid vehicles are much higher than that for devices to be used in electric vehicles. The energy density and power density requirements for pulse-power devices for hybrid vehicles, are not much different than those in an electric vehicle. The cycle life requirements for primary energy-storage units for hybrid vehicles are about double that for electric vehicles, because of the reduced size of the storage units in the hybrid vehicles. The cycle life for pulse-power devices for hybrid vehicles is about the same as for electric vehicles having battery load leveling. Because of the need for additional components in the hybrid driveline, the cost of the energy storage units in hybrid vehicles should be much less (at least a factor of two) than those in electric vehicles. There are no presently available energy storage units that meet all the specifications for hybrid vehicle applications, but ultracapacitors and bipolar lead-acid batteries are under development that have the potential for meeting them. If flywheel systems having a mechanical system energy density of 40 to 50 W(center dot)h/kg and an electrical system power density of 2 to 3 kw/kg can be developed, they would have the potential of meeting specifications for primary storage and pulse power units.

  14. Energy Conversion and Storage Requirements for Hybrid Electric Aircraft

    Science.gov (United States)

    Misra, Ajay

    2016-01-01

    Among various options for reducing greenhouse gases in future large commercial aircraft, hybrid electric option holds significant promise. In the hybrid electric aircraft concept, gas turbine engine is used in combination with an energy storage system to drive the fan that propels the aircraft, with gas turbine engine being used for certain segments of the flight cycle and energy storage system being used for other segments. The paper will provide an overview of various energy conversion and storage options for hybrid electric aircraft. Such options may include fuel cells, batteries, super capacitors, multifunctional structures with energy storage capability, thermoelectric, thermionic or a combination of any of these options. The energy conversion and storage requirements for hybrid electric aircraft will be presented. The role of materials in energy conversion and storage systems for hybrid electric aircraft will be discussed.

  15. Update of Energy Efficiency Requirements for Manufactured Homes

    Energy Technology Data Exchange (ETDEWEB)

    Conner, Craig C.; Dillon, Heather E.; Lucas, Robert G.; Early, Chris; Lubliner, Michael

    2004-03-22

    Energy efficiency requirements were developed for manufactured (mobile) homes, which are regulated by the U.S. Department of Housing and Urban Development (HUD). A life-cycle cost analysis from the homeowner's perspective was used to establish parameters for a least-cost home in a large number of cities. Economic, financial, and energy-efficiency measures for the life-cycle cost analysis were selected. The resulting energy-efficiency levels were aggregated to the existing HUD zones and expressed as a maximum overall home U-value (thermal transmittance) requirement for the building envelope. The proposed revised standard's costs, benefits, and net value to the consumer were quantified. This analysis updates a similar effort completed in 1992, which was the basis for the existing HUD code Uo requirements.

  16. Renewable Energy Requirements for Future Building Codes: Energy Generation and Economic Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Bryan J.; Weimar, Mark R.; Dillon, Heather E.

    2011-09-30

    As the model energy codes are improved to reach efficiency levels 50 percent greater than current codes, installation of on-site renewable energy generation is likely to become a code requirement. This requirement will be needed because traditional mechanisms for code improvement, including the building envelope, mechanical systems, and lighting, have been maximized at the most cost-effective limit.

  17. Energy, material and land requirement of a fusion plant

    DEFF Research Database (Denmark)

    Schleisner, Liselotte; Hamacher, T.; Cabal, H.

    2001-01-01

    The energy and material necessary to construct a power plant and the land covered by the plant are indicators for the ‘consumption’ of environment by a certain technology. Based on current knowledge, estimations show that the material necessary to construct a fusion plant will exceed the material...... requirement of a fission plant by a factor of two. The material requirement for a fusion plant is roughly 2000 t/MW and little less than 1000 t/MW for a fission plant. The land requirement for a fusion plant is roughly 300 m2/MW and the land requirement for a fission plant is a little less than 200 m2/MW....... The energy pay back time, defined later in Section 6, is little more than half a year for a fusion plant with capacity 1 GWe. Only the electrical energy is accounted for as released energy not the thermal energy. In all these indicators, fusion compares well with conventional technologies while it consumes...

  18. Factorial estimation of energy requirement for egg production

    DEFF Research Database (Denmark)

    Chwalibog, André

    1992-01-01

    is different between protein and fat, the ME requirement was calculated as the sum of ME for maintenance and the partial requirements for protein, fat, and carbohydrate deposition. For practical applications, functions for prediction of protein (OP), fat (OF), and energy (OE) in eggs during the laying period...... efficiencies for energy retention in protein (Kop = .50), fat (Kof = .79), and carbohydrates (Koc = .79)] increased from .26 Mcal at 27 wk of age to .29 Mcal at 48 wk, corresponding to 5.93 and 6.07 Mcal/kg egg....

  19. The water footprint of energy consumption: an assessment of water requirements of primary energy carriers

    NARCIS (Netherlands)

    Gerbens-Leenes, P.W.; Hoekstra, A.Y.; Van der Meer, T.H.

    2007-01-01

    Gerbens-Leenes, P.W., Hoekstra, A.Y., Van der Meer, T.H., 2007. The water footprint of energy consumption: an assessment of water requirements of primary energy carriers. In: proceedings ‘First World Water Sustainability-Renewable Energy Congress and Exhibition’. 25-28 November 2007, Maastricht, the

  20. The water footprint of energy consumption: an assessment of water requirements of primary energy carriers

    NARCIS (Netherlands)

    Gerbens-Leenes, P.W.; Hoekstra, A.Y.; Van der Meer, T.H.

    2007-01-01

    Gerbens-Leenes, P.W., Hoekstra, A.Y., Van der Meer, T.H., 2007. The water footprint of energy consumption: an assessment of water requirements of primary energy carriers. In: proceedings ‘First World Water Sustainability-Renewable Energy Congress and Exhibition’. 25-28 November 2007, Maastricht, the

  1. Analysis of annual cooling energy requirements for glazed academic buildings

    Energy Technology Data Exchange (ETDEWEB)

    Sulaiman, S.A. [Universiti Teknologi Petronas, Tronoh, Perak (Malaysia). Dept. of Mechanical Engineering; Hassan, A.H. [Vinyl Chloride Malaysia Sdn Bhd, Terengganu (Malaysia). Dept. of Engineering

    2011-07-01

    Malaysia experienced rapid increase in energy consumption in the last decade due to its high economic growth and increase in the standard living of household. Energy is becoming more costly and the situation is worsened by the global warming as a result of greenhouse gas emission. A more efficient energy usage and significant reduction in the released emission is therefore required. Space cooling with the use of air conditioners is practiced all year round in Malaysia and this accounts for 42% of total electricity energy consumption for commercial buildings and 30% of residential buildings. Reduction in the energy used for cooling in the built environment is a vital step to energy conservation in Malaysia. The objective of the present study was to analyze the annual cooling energy of highly glazed academic buildings which are located in a university in Malaysia. The outcome of the study would enable further remedial actions in reducing the energy consumption of the buildings' air conditioning system. The study is conducted by computer simulation using EnergyPlus software to calculate the cooling energy of a selected building or area. Comparison is made against the rated equipment load (i.e., the air handling unit) installed in the buildings. Since the buildings in the present study are not constructed parallel to each other the effect of building orientations with respect to the sun positions are also studied. The implications of shades such as venetian blind on the cooling energy are investigated in assessing their effectiveness in reducing the cooling energy, apart from providing thermal comfort to the occupants. In the aspect of operation, the present study includes the effects of reducing the set point air temperature and infiltration of outdoor air due to doors that are left open by the occupants. It is found from the present study that there are significant potentials for savings in the cooling energy of the buildings.

  2. ENERGY REQUIREMENT FOR THYMINELESS DEATH IN CELLS OF ESCHERICHIA COLI.

    Science.gov (United States)

    FREIFELDER, D; MAALOE, O

    1964-10-01

    Freifelder, David (University of California, Berkeley), and Ole Maaløe. Energy requirement for thymineless death in cells of Escherichia coli. J. Bacteriol. 88:987-990. 1964.-Thymineless death in thymine-requiring Escherichia coli is arrested immediately and reversibly by nitrogenation if the bacterial population is growing in a medium containing a carbon source that can only be metabolized aerobically. The mechanism of death, therefore, involves a metabolic process.

  3. Energy Requirement of Extra Virgin Olive Oil Production

    Directory of Open Access Journals (Sweden)

    Giulio Mario Cappelletti

    2014-08-01

    Full Text Available The scope of this chapter is to calculate the net energy of the production chain for virgin olive oil. Therefore, the determination was carried out for the direct and indirect energy inputs and the energy present as feedstock in the outputs (products and by-products. To perform this analysis, all of the production processes for olives and for oil extraction were studied. For the agricultural phase, three systems of cultivation were taken into consideration: the centenary olive grove (COO, the “intensive” olive grove (HDO and, the more recently introduced, “super-intensive” olive grove (HSDO. The last two models are distinguished by the high number of trees per hectare and by an intense mechanization of agricultural practices. Regarding the oil extraction phase, four different technologies were compared: the pressure system (PS, the two-phase system (2PS, the three-phase (3PS, and the system, called “de-pitted”, which provides for the separation of the pits before the oil is extracted (DPS. The analysis showed that the production of olives needs more than 90% of energy requirements, much of which is met by non-renewable sources of energy. The production of fertilizers, and also irrigation, are the production factors that require a considerable amount of energy. Among the three agricultural systems analyzed, the COO system of cultivation is the one that requires less energy as compared to the other systems. The scenario that enables the most energy return, however, is the SHDO system of cultivation, due to the greater amount of pruning residues that can be obtained.

  4. Human energy use and the carbon cycle

    Energy Technology Data Exchange (ETDEWEB)

    Smith, S.L. [National Round Table on the Environment and the Economy (Canada)

    2001-07-01

    This paper discusses the close connection between human energy use and the Carbon Cycle. The movement of Carbon from the atmosphere to organic (living) matter and then back to atmosphere is called the Carbon Cycle and can be considered the basic infrastructure for life itself. In the process, some of the organic matter becomes trapped in the earth and in the oceans; some of what is trapped becomes, over millions of years, Carbon-based fuels known as 'fossil fuels'. This paper concludes that climate change is primarily an energy problem, not a pollution problem, and discusses various options and technologies to lower energy consumption.

  5. Cost-optimal levels for energy performance requirements

    DEFF Research Database (Denmark)

    Thomsen, Kirsten Engelund; Aggerholm, Søren; Kluttig-Erhorn, Heike

    2011-01-01

    The CA conducted a study on experiences and challenges for setting cost optimal levels for energy performance requirements. The results were used as input by the EU Commission in their work of establishing the Regulation on a comparative methodology framework for calculating cost optimal levels o...

  6. Impact Propagation of Human Errors on Software Requirements Volatility

    Directory of Open Access Journals (Sweden)

    Zahra Askarinejadamiri

    2017-02-01

    Full Text Available Requirements volatility (RV is one of the key risk sources in software development and maintenance projects because of the frequent changes made to the software. Human faults and errors are major factors contributing to requirement change in software development projects. As such, predicting requirements volatility is a challenge to risk management in the software area. Previous studies only focused on certain aspects of the human error in this area. This study specifically identifies and analyses the impact of human errors on requirements gathering and requirements volatility. It proposes a model based on responses to a survey questionnaire administered to 215 participants who have experience in software requirement gathering. Exploratory factor analysis (EFA and structural equation modelling (SEM were used to analyse the correlation of human errors and requirement volatility. The results of the analysis confirm the correlation between human errors and RV. The results show that human actions have a higher impact on RV compared to human perception. The study provides insights into software management to understand socio-technical aspects of requirements volatility in order to control risk management. Human actions and perceptions respectively are a root cause contributing to human errors that lead to RV.

  7. Optimization of energy and manpower requirements in Nigerian bakeries

    Energy Technology Data Exchange (ETDEWEB)

    Ekechukwu, O.V.; Madu, A.C.; Nwanya, S.C. [Department of Mechanical Engineering, University of Nigeria, Nsukka (Nigeria); Agunwamba, J.C. [Department Civil Engineering, University of Nigeria, Nsukka (Nigeria)

    2011-01-15

    A study on energy and manpower requirements for the bakery industry in Nigeria was carried out, covering 90 bakeries representing 75% of total registered bakeries in Onitsha city. Analysis of the energy and manpower related time series data, using engineering and statistical tools, resulted in the development of empirical model for the estimation of capacity, manpower and energy requirements in the bakery industry. This empirical model can be used for the design of a new bakery or expansion of existing one. The conditions for optimum inventory and design were determined through this optimization and the results were compared with existing system. The study revealed a huge capital investment which amounts to 5.6 billion Naira annually, a correlation between capacity of the bakery plants and resource usage (manpower, raw materials and energy use), and jobs creation potentials for 960 persons for Onitsha city alone. Diesel contributes 66.75% of total heating energy need, followed by firewood, 22.57% and petrol, 10.68%. Application of optimization techniques could result in 61% savings in inventory costs and cut in energy by about 7.4% with overall cost reduction of 8%. (author)

  8. Drivers of Bacterial Maintenance and Minimal Energy Requirements.

    Science.gov (United States)

    Kempes, Christopher P; van Bodegom, Peter M; Wolpert, David; Libby, Eric; Amend, Jan; Hoehler, Tori

    2017-01-01

    Microbes maintain themselves through a variety of processes. Several of these processes can be reduced or shut down entirely when resource availability declines. In pure culture conditions with ample substrate supply, a relationship between the maximum growth rate and the energy invested in maintenance has been reported widely. However, at the other end of the resources spectrum, bacteria are so extremely limited by energy that no growth occurs and metabolism is constrained to the most essential functions only. These minimum energy requirements have been called the basal power requirement. While seemingly different from each other, both aspects are likely components of a continuum of regulated maintenance processes. Here, we analyze cross-species tradeoffs in cellular physiology over the range of bacterial size and energy expenditure and determine the contributions to maintenance metabolism at each point along the size-energy spectrum. Furthermore, by exploring the simplest bacteria within this framework- which are most affected by maintenance constraints- we uncover which processes become most limiting. For the smallest species, maintenance metabolism converges on total metabolism, where we predict that maintenance is dominated by the repair of proteins. For larger species the relative costs of protein repair decrease and maintenance metabolism is predicted to be dominated by the repair of RNA components. These results provide new insights into which processes are likely to be regulated in environments that are extremely limited by energy.

  9. Air humidity requirements for human comfort

    DEFF Research Database (Denmark)

    Toftum, Jørn; Fanger, Povl Ole

    1999-01-01

    level near 100% rh. For respiratory comfort are the requirements much more stringent and results in lower permissible indoor air humidities. Compared with the upper humidity limit specified in existing thermal comfort standards, e.g. ASHRAE Addendum 55a, the humidity limit based on skin humidity...

  10. Body composition and net energy requirements of Brazilian Somali lambs

    Directory of Open Access Journals (Sweden)

    Elzânia S. Pereira

    2014-12-01

    Full Text Available The aim of this study was to determine the energy requirements for maintenance (NEm and growth of 48 Brazilian Somali ram lambs with an average initial body weight of 13.47±1.76 kg. Eight animals were slaughtered at the trials beginning as a reference group to estimate the initial empty body weight (EBW and body composition. The remaining animals were assigned to a randomised block design with eight replications per block and five diets with increasing metabolisable energy content (4.93, 8.65, 9.41, 10.12 and 11.24 MJ/kg dry matter. The logarithm of heat production was regressed against metabolisable energy intake (MEI, and the NEm (kJ/kg0.75 EBW/day were estimated by extrapolation, when MEI was set at zero. The NEm was 239.77 kJ/kg0.75 EBW/day. The animal’s energy and EBW fat contents increased from 11.20 MJ/kg and 208.54 g/kg to 13.54 MJ/kg and 274.95 g/kg of EBW, respectively, as the BW increased from 13 to 28.70 kg. The net energy requirements for EBW gain increased from 13.79 to 16.72 MJ/kg EBW gain for body weights of 13 and 28.70 kg. Our study indicated the net energy requirements for maintenance in Brazilian Somali lambs were similar to the values commonly recommended by the United States’ nutritional system, but lower than the values recommended by Agricultural Research Council and Commonwealth Scientific and Industrial Research Organization. Net requirements for weight gain were less compared to the values commonly recommended by nutritional system of the United States.

  11. Renewable Energy Requirements for Future Building Codes: Options for Compliance

    Energy Technology Data Exchange (ETDEWEB)

    Dillon, Heather E.; Antonopoulos, Chrissi A.; Solana, Amy E.; Russo, Bryan J.

    2011-09-30

    As the model energy codes are improved to reach efficiency levels 50 percent greater than current codes, use of on-site renewable energy generation is likely to become a code requirement. This requirement will be needed because traditional mechanisms for code improvement, including envelope, mechanical and lighting, have been pressed to the end of reasonable limits. Research has been conducted to determine the mechanism for implementing this requirement (Kaufman 2011). Kaufmann et al. determined that the most appropriate way to structure an on-site renewable requirement for commercial buildings is to define the requirement in terms of an installed power density per unit of roof area. This provides a mechanism that is suitable for the installation of photovoltaic (PV) systems on future buildings to offset electricity and reduce the total building energy load. Kaufmann et al. suggested that an appropriate maximum for the requirement in the commercial sector would be 4 W/ft{sup 2} of roof area or 0.5 W/ft{sup 2} of conditioned floor area. As with all code requirements, there must be an alternative compliance path for buildings that may not reasonably meet the renewables requirement. This might include conditions like shading (which makes rooftop PV arrays less effective), unusual architecture, undesirable roof pitch, unsuitable building orientation, or other issues. In the short term, alternative compliance paths including high performance mechanical equipment, dramatic envelope changes, or controls changes may be feasible. These options may be less expensive than many renewable systems, which will require careful balance of energy measures when setting the code requirement levels. As the stringency of the code continues to increase however, efficiency trade-offs will be maximized, requiring alternative compliance options to be focused solely on renewable electricity trade-offs or equivalent programs. One alternate compliance path includes purchase of Renewable Energy

  12. Energy requirement and economic analysis of citrus production in Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Ozkan, Burhan E-mail: bozkan@akdeniz.edu.tr; Akcaoz, Handan; Karadeniz, Feyza

    2004-07-01

    The aim of this research was to examine the energy requirements of the inputs and output in citrus production in the Antalya province of Turkey. Data for the production of citrus fruits (orange, lemon and mandarin) were collected from 105 citrus farms by using a face to face questionnaire method. The research results revealed that lemon production was the most energy intensive among the three fruits investigated. The energy input of chemical fertilizer (49.68%), mainly nitrogen, has the biggest share in the total energy inputs followed by Diesel (30.79%). The lemon production consumed a total of 62 977.87 MJ/ha followed by orange and mandarin with 60 949.69 and 48 838.17 MJ/ha, respectively. The energy ratios for orange, mandarin and lemon were estimated to be 1.25, 1.17 and 1.06, respectively. On average, the non-renewable form of energy input was 95.90% of the total energy input used in citrus production compared to only 3.74% for the renewable form. The benefit-cost ratio was the highest in orange production (2.37) followed by lemon. The results indicate that orange production in the research area is most remunerative to growers compared to lemon and mandarin.

  13. The Importance of Multilateral Safety Requirements for Human Spaceflight

    Science.gov (United States)

    Pido, Kelle

    2005-01-01

    The International Space Station (ISS) Program initially implemented safety requirements in a series of bilateral agreements between NASA and each International Partner. As the program matured and multilateral processes began to be developed, the differences between these bilaterally agreed requirement sets became more significant. Efforts to develop multilateral safety requirements were hampered for many reasons including assessment of national standards used in the bilateral agreements, requirements baselines for existing contracts, and resource limitations to address requirements changes late in the development and operations phases. To avoid similar requirements issues in the future, international safety requirements need to be developed for human spaceflight. This paper will provide the background of the ISS bilateral Safety and Mission Assurance requirements and processes, describe the activities to develop multilateral safety requirements and processes, and give examples of issues that were encountered. Further, the paper will make recommendations regarding the development of international safety requirements for human spaceflight and the safety topics to be addressed.

  14. 45 CFR 96.128 - Requirements regarding human immunodeficiency virus.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Requirements regarding human immunodeficiency virus. 96.128 Section 96.128 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL... human immunodeficiency virus. (a) In the case of a designated State as described in paragraph (b)...

  15. Energy requirements for HE-3 mining operations on the Moon

    Science.gov (United States)

    Kulcinski, Gerald L.

    At the present rate of world energy consumption (10 TW-y/y) and allowing for an equilibrium consumption of 20 to 30 TW-y/y in mid 21st century, we will exhaust economically recoverable fossil fuels in the next 50 to 60 years. We will then have to rely on nuclear (fission and fusion) and renewable energy to feed, warm, and protect the world's population. Fusion energy is expected to play an important role in the 21st century and there a 2 billion dollar per year research program to commercialize that energy resource. A serious problem with this is its reliance on the D-T fuel cycle which releases 80 percent of its energy in the form of neutrons. These neutrons cause significant radiation damage and induce large amounts of radioactivity. There is another fusion fuel cycle involving the isotopes of Deuterium and Helium-3 which, if configured properly, releases 1 percent or less of its energy in neutrons. Obviously, such a fuel would be preferred, but there is no large source of He-3 known to satisfy world energy needs. Fortunately, a very large source of He-3 was found on the Moon, implanted over the past 4 billion years by the solar wind. Recent analysis of Apollo and Luna data reveals that over a million tons of He-3 sit on the Moon's surface. The potential energy in this He-3 fuel is 10 times that contained in all the coal, oil, and natural gas on the Earth. The purpose of this paper is to examine the energy required to extract the He-3 from the lunar regolith.

  16. On the Energy Required to Eject Processed Matter from Galaxies

    CERN Document Server

    Tenorio-Tagle, G

    2001-01-01

    We evaluate the minimum energy input rate that starbursts require for expelling their newly processed matter from their host galaxies. Special attention is given to the pressure caused by the environment in which a galaxy is situated, as well as to the intrinsic rotation of the gaseous component. We account for these factors and for a massive dark matter distribution, and develop a self-consistent solution for the interstellar matter gas distribution. Our results are in excellent agreement with the results of Mac Low & Ferrara (1999) for galaxies with a flattened disk-like ISM density distribution and a low intergalactic gas pressure ($P_{IGM}/k$ $\\leq $ 1 cm$^{-3}$ K). However, our solution also requires a much larger energy input rate threshold when one takes into consideration both a larger intergalactic pressure and the possible existence of a low-density, non-rotating, extended gaseous halo component.

  17. Manpower requirements for energy conservation: a case study of California

    Energy Technology Data Exchange (ETDEWEB)

    Wilms, W.W.; McCarthy, M.A.; Moore, R.W.

    1982-07-15

    This case study of California's new energy conservation policies concludes the impact of such legislation is qualitative, not quantitative. Substantial numbers of new jobs are not created by these policies, but some new knowledge is required by the existing workforce to adequately comply. The study suggests that the conventional manpower requirements approach to planning that attempts to numerically match supply and demand is not a productive way to plan for qualitative changes in the workforce. Instead, the study details how regulations act to create an information and training system that operates on natural incentives. In California, these new energy policies created an immediate demand for relevant information by designers, builders and building officials. Further, the investigation describes the existence of a non-formal training system and how it emerges in the short-run to meet immediate knowledge demands. The study shows how building inspection that insures uniform compliance can act to close the system, thereby intensifying designers and builders demands for new knowledge which are met by non-formal training organizations - trade and professional associations and manufacturers. Though the study shows how this system driven by regulations on one end and bounded by inspection and enforcement on the other, operates without central guidance, it identifies key barriers that impede its effectiveness. The study recommends specific steps the US Department of Energy and state energy planners can take to improve the system's effectiveness by learning from the California experience.

  18. Human factors by descent energy management

    Science.gov (United States)

    Curry, R. E.

    1979-01-01

    This paper describes some of the results of a human factors study of energy management during descent using standard aircraft displays. Discussions with pilots highlighted the practical constraints involved and the techniques (algorithms) used to accomplish the descent. The advantages and disadvantages of these algorithms are examined with respect to workload and their sensitivity to disturbances. Vertical navigation and flight performance computers are discussed in terms of the information needed for effective pilot monitoring and takeover

  19. Human energy and work in a European village.

    Science.gov (United States)

    Freudenberger, H

    1998-09-01

    In order to understand the problem of poverty its historical background must be elucidated. Since in the past most people in Europe were peasants living in small villages, a useful, initial way to examine the question of poverty is to investigate the villagers' condition of life. A basic contribution to this endeavor is to compile a food balance sheet that includes the food energy necessary for a healthy population, the amount of food in terms of calories that was available and the human energy required for the production of the nutriments. This essay is a case-study, incorporating these variables for the village Unterfinning (Bavaria) in 1721.

  20. Net energy evaluation of feeds and determination of net energy requirements for pigs

    Directory of Open Access Journals (Sweden)

    Jean Noblet

    2007-07-01

    Full Text Available Feeds for pigs can be attributed different energy values according to, first, the step considered in energy utilization (DE: digestible energy, ME: metabolizable energy and NE: net energy and, second, the method used for estimation at each step. Reference methods for evaluating DE content are based on in vivo digestibility measurements; indirect estimates of DE values are obtained from in vitro methods or prediction equations based on chemical characteristics. Methods have also been proposed for estimating urinary energy (and gas energy to a smaller extent in order to calculate ME content from DE value. The NE values originate from energy balance studies (slaughter methods or, more commonly, indirect calorimetry measurements in respiration chambers and their compilation allows the calculation of NE prediction equations based on digestible nutrient contents or DE or ME contents. Such equations are applicable to both ingredients and compound feeds. They may differ between origins according to the fractionation method of organic matter or assumptions such as the NE requirement for maintenance (or fasting heat production. These measurements represent the bases for establishment of energy values in feeding tables. Results indicate that energy digestibility of feeds is negatively affected by dietary fibre content but this negative effect is attenuated with body weight increase, which suggests that feeds should be attributed DE values according to pig BW; in practice, at least two different DE values, one for growing-finishing pigs and one for mature pigs (reproductive sows, are recommended. The energy digestibility of pig feeds can also be affected by feed processing (pelletting, extrusion, etc.. Efficiency of ME utilization for NE averages 74-75% for conventional pig diets but it is directly dependent on diet chemical composition with efficiencies higher for ME from fat (90% or starch (82% than from protein or dietary fibre (60%. The hierarchy

  1. Energy requirements of the U. S. pulp and paper industry

    Energy Technology Data Exchange (ETDEWEB)

    Cosman, C.M.

    1979-01-01

    According to the American Paper Institute, the paper industry is the fifth largest consumer of purchased energy in the U.S. and the largest consumer of fuel oil. Almost one-half of its total energy consumption comes from the industry's own process wasts: spent pulping liquors, bark, and hogged wood. In 1976 non-fossil fuels provided 44.6% of the total Btu consumption, up from 41.1% in 1972 and 42.6% in 1975. (Self-generated hydro power and other electricity produced from fossil fuel supplied another 1.5% of total needs in 1972 and 2.1% in 1975.) The industry has established a mechanism for self-policing by submitting periodic reports on its energy consumption to the API. The target set by the industry is a 20% saving of purchased energy by 1980. So far a reduction of about 15% has been achieved, making adjustments for add-ons required because of environmental regulations and other changes vs the base year of 1972.

  2. Design requirements for interfaces in solar energy conversion technologies

    Science.gov (United States)

    Butler, B. L.

    1982-04-01

    Candidate materials for improving the durability and economics of solar energy conversion systems (SECS) are reviewed. A 30-yr lifetime is regarded as necessary for solar collector and concentrator materials in order to offset the high initial costs of SECS in parabolic dish, heliostat, parabolic trough, flat plate collector, OTEC, solar cell, and wind turbine configurations. The materials are required to transfer a maximum amount of intercepted energy without degrading from exposure to UV radiation, wind, water, dust, and temperature cycling. Glass and mirrored surfaces for reflecting or refracting optical subsystems are currently made from soda-lime, boro- and aluminosilicate, and must resist chemicals, abrasion, and permeability, and have good strength, flexibility, coefficient of expansion, and Young's modulus. Additional concerns are present in photochemical, solar cell, and in substrata components and systems.

  3. Production of cement requiring low energy expenditure. An industrial test

    Energy Technology Data Exchange (ETDEWEB)

    Gimenez, S.; Blanco, M.T.; Palomo, A.; Puertas, F. (Instituto de Ciencias de la Construccion, Madrid (Spain))

    1991-01-01

    A new method for making cement is proposed. It is based on the use of CaF{sub 2} and CaSO{sub 4} for partial replacement of the usual raw materials in cement manufacturing. This paper shows the feasibility of the proposed method on an industrial scale. A test carried out in a Spanish cement factory (1500 t yield of the new cement) has revealed that the mehtod can not only be adapted to the current technology but also requires a much lower energy expenditure. The final product is shown to have excellent properties in comparison with OPC. (orig.).

  4. Minimum energy surface required by quantum memory devices.

    Science.gov (United States)

    van Dam, Wim; Nguyen, Hieu D

    2013-06-21

    We address the question of what physical resources are required and sufficient to store classical information. While there is no lower bound on the required energy or space to store information, we find that there is a nonzero lower bound for the product P = of these two resources. Specifically, we prove that any physical system of mass m and d degrees of freedom that stores S bits of information will have a lower bound on the product P that is proportional to d2/m(exp(S/d) - 1)2. This result is obtained in a nonrelativistic, quantum mechanical setting, and it is independent of earlier thermodynamical results such as the Bekenstein bound on the entropy of black holes.

  5. Human Energy Field: A Concept Analysis.

    Science.gov (United States)

    Shields, Deborah; Fuller, Ann; Resnicoff, Marci; Butcher, Howard K; Frisch, Noreen

    2016-11-23

    The human energy field (HEF) as a phenomenon of interest across disciplines has gained increased attention over the 20th and 21st centuries. However, a concern has arisen that there is a lack of evidence to support the concept of the HEF as a phenomenon of interest to professional nurses and nursing practice. Using Chinn and Kramer's method of creating conceptual meaning, a concept analysis was conducted for the purpose of developing a conceptual definition of HEF. A systematic review of the literature using the CINAHL database yielded a total of 81 articles and text sources that were determined to be relevant to the concept analysis. The HEF is defined as a luminous field of energy that comprises a person, extends beyond the physical body, and is in a continuous mutual process with the environmental energy field. It is a vital energy that is a continuous whole and is recognized by its unique pattern; it is dynamic, creative, nonlinear, unpredictable, and flows in lower and higher frequencies. The balanced HEF is characterized by flow, rhythm, symmetry, and gentle vibration.

  6. Large Scale Computing and Storage Requirements for High Energy Physics

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, Richard A.; Wasserman, Harvey

    2010-11-24

    The National Energy Research Scientific Computing Center (NERSC) is the leading scientific computing facility for the Department of Energy's Office of Science, providing high-performance computing (HPC) resources to more than 3,000 researchers working on about 400 projects. NERSC provides large-scale computing resources and, crucially, the support and expertise needed for scientists to make effective use of them. In November 2009, NERSC, DOE's Office of Advanced Scientific Computing Research (ASCR), and DOE's Office of High Energy Physics (HEP) held a workshop to characterize the HPC resources needed at NERSC to support HEP research through the next three to five years. The effort is part of NERSC's legacy of anticipating users needs and deploying resources to meet those demands. The workshop revealed several key points, in addition to achieving its goal of collecting and characterizing computing requirements. The chief findings: (1) Science teams need access to a significant increase in computational resources to meet their research goals; (2) Research teams need to be able to read, write, transfer, store online, archive, analyze, and share huge volumes of data; (3) Science teams need guidance and support to implement their codes on future architectures; and (4) Projects need predictable, rapid turnaround of their computational jobs to meet mission-critical time constraints. This report expands upon these key points and includes others. It also presents a number of case studies as representative of the research conducted within HEP. Workshop participants were asked to codify their requirements in this case study format, summarizing their science goals, methods of solution, current and three-to-five year computing requirements, and software and support needs. Participants were also asked to describe their strategy for computing in the highly parallel, multi-core environment that is expected to dominate HPC architectures over the next few years

  7. Looped energy harvester for human motion

    Science.gov (United States)

    Geisler, M.; Boisseau, S.; Gasnier, P.; Willemin, J.; Gobbo, C.; Despesse, G.; Ait-Ali, I.; Perraud, S.

    2017-10-01

    The development of energy harvesters for smart wearables is a challenging topic, with a difficult combination of ergonomics constraints, lifetime and electrical requirements. In this work, we focus on an inertial inductive structure, composed of a magnetic ball circulating inside a closed-loop guide and converting the kinetic energy of the user’s limbs into electricity during the run. A specific induction issue related to the free self-rotation of the ball is underlined and addressed using a ferromagnetic ‘rail’ component. From a 2 g moving ball, a 5 cm-diameter 21 cm3 prototype generated up to 4.8 mW of average power when worn by someone running at 8 km h‑1. This device is demonstrated to charge a 2.4 V NiMH battery and supply an acceleration and temperature Wireless Sensor Node at 20 Hz.

  8. Human development and sustainability of energy systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This seminar on human development and sustainability was jointly organized by the French agency of environment and energy mastery (Ademe) and Enerdata company. This document summarises the content of the different presentations and of the minutes of the discussions that took place at the end of each topic. The different themes discussed were: 1 - Political and methodological issues related to sustainability (sustainability concept in government policy, sustainability and back-casting: lessons from EST); 2 - towards a socially viable world: thematic discussions (demography and peoples' migration; time budget and life style change - equal sex access to instruction and labour - geopolitical regional and inter-regional universal cultural acceptability; welfare, poverty and social link and economics); 3 - building up an environmentally sustainable energy world, keeping resources for future generations and preventing geopolitical ruptures (CO{sub 2} emissions; nuclear issues; land-use, noise, and other industrial risks). The memorandum on sustainability issues in view of very long term energy studies is reprinted in the appendix. The transparencies of seven presentations are attached to this document. (J.S.)

  9. Urban Energy Flux: Human Mobility as a Predictor for Spatial Changes

    CERN Document Server

    Mohammadi, Neda

    2016-01-01

    As a key energy challenge, we urgently require a better understanding of how growing urban populations interact with municipal energy systems and the resulting impact on energy demand across city neighborhoods, which are dense hubs of both consumer population and CO2 emissions. Currently, the physical characteristics of urban infrastructure are the main determinants in predictive modeling of the demand side of energy in our rapidly growing urban areas; overlooking influence related to fluctuating human activities. Here, we show how applying intra-urban human mobility as an indicator for interactions of the population with local energy systems can be translated into spatial imprints to predict the spatial distribution of energy use in urban settings. Our findings establish human mobility as an important element in explaining the spatial structure underlying urban energy flux and demonstrate the utility of a human mobility driven approach for predicting future urban energy demand with implications for CO2 emiss...

  10. Identifying Requirements for Effective Human-Automation Teamwork

    Energy Technology Data Exchange (ETDEWEB)

    Jeffrey C. Joe; John O' Hara; Heather D. Medema; Johanna H. Oxstrand

    2014-06-01

    Previous studies have shown that poorly designed human-automation collaboration, such as poorly designed communication protocols, often leads to problems for the human operators, such as: lack of vigilance, complacency, and loss of skills. These problems often lead to suboptimal system performance. To address this situation, a considerable amount of research has been conducted to improve human-automation collaboration and to make automation function better as a “team player.” Much of this research is based on an understanding of what it means to be a good team player from the perspective of a human team. However, the research is often based on a simplified view of human teams and teamwork. In this study, we sought to better understand the capabilities and limitations of automation from the standpoint of human teams. We first examined human teams to identify the principles for effective teamwork. We next reviewed the research on integrating automation agents and human agents into mixed agent teams to identify the limitations of automation agents to conform to teamwork principles. This research resulted in insights that can lead to more effective human-automation collaboration by enabling a more realistic set of requirements to be developed based on the strengths and limitations of all agents.

  11. The energy required to produce materials: constraints on energy-intensity improvements, parameters of demand.

    Science.gov (United States)

    Gutowski, Timothy G; Sahni, Sahil; Allwood, Julian M; Ashby, Michael F; Worrell, Ernst

    2013-03-13

    In this paper, we review the energy requirements to make materials on a global scale by focusing on the five construction materials that dominate energy used in material production: steel, cement, paper, plastics and aluminium. We then estimate the possibility of reducing absolute material production energy by half, while doubling production from the present to 2050. The goal therefore is a 75 per cent reduction in energy intensity. Four technology-based strategies are investigated, regardless of cost: (i) widespread application of best available technology (BAT), (ii) BAT to cutting-edge technologies, (iii) aggressive recycling and finally, and (iv) significant improvements in recycling technologies. Taken together, these aggressive strategies could produce impressive gains, of the order of a 50-56 per cent reduction in energy intensity, but this is still short of our goal of a 75 per cent reduction. Ultimately, we face fundamental thermodynamic as well as practical constraints on our ability to improve the energy intensity of material production. A strategy to reduce demand by providing material services with less material (called 'material efficiency') is outlined as an approach to solving this dilemma.

  12. Energy Efficiency Requirements in Building Codes, Energy Efficiency Policies for New Buildings. IEA Information Paper

    Energy Technology Data Exchange (ETDEWEB)

    Laustsen, Jens

    2008-03-15

    The aim of this paper is to describe and analyse current approaches to encourage energy efficiency in building codes for new buildings. Based on this analysis the paper enumerates policy recommendations for enhancing how energy efficiency is addressed in building codes and other policies for new buildings. This paper forms part of the IEA work for the G8 Gleneagles Plan of Action. These recommendations reflect the study of different policy options for increasing energy efficiency in new buildings and examination of other energy efficiency requirements in standards or building codes, such as energy efficiency requirements by major renovation or refurbishment. In many countries, energy efficiency of buildings falls under the jurisdiction of the federal states. Different standards cover different regions or climatic conditions and different types of buildings, such as residential or simple buildings, commercial buildings and more complicated high-rise buildings. There are many different building codes in the world and the intention of this paper is not to cover all codes on each level in all countries. Instead, the paper details different regions of the world and different ways of standards. In this paper we also evaluate good practices based on local traditions. This project does not seek to identify one best practice amongst the building codes and standards. Instead, different types of codes and different parts of the regulation have been illustrated together with examples on how they have been successfully addressed. To complement this discussion of efficiency standards, this study illustrates how energy efficiency can be improved through such initiatives as efficiency labelling or certification, very best practice buildings with extremely low- or no-energy consumption and other policies to raise buildings' energy efficiency beyond minimum requirements. When referring to the energy saving potentials for buildings, this study uses the analysis of recent IEA

  13. High Energy Physics and Nuclear Physics Network Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Dart, Eli; Bauerdick, Lothar; Bell, Greg; Ciuffo, Leandro; Dasu, Sridhara; Dattoria, Vince; De, Kaushik; Ernst, Michael; Finkelson, Dale; Gottleib, Steven; Gutsche, Oliver; Habib, Salman; Hoeche, Stefan; Hughes-Jones, Richard; Ibarra, Julio; Johnston, William; Kisner, Theodore; Kowalski, Andy; Lauret, Jerome; Luitz, Steffen; Mackenzie, Paul; Maguire, Chales; Metzger, Joe; Monga, Inder; Ng, Cho-Kuen; Nielsen, Jason; Price, Larry; Porter, Jeff; Purschke, Martin; Rai, Gulshan; Roser, Rob; Schram, Malachi; Tull, Craig; Watson, Chip; Zurawski, Jason

    2014-03-02

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy (DOE) Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of SC programs, ESnet regularly updates and refreshes its understanding of the networking requirements needed by instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 25 years. In August 2013, ESnet and the DOE SC Offices of High Energy Physics (HEP) and Nuclear Physics (NP) organized a review to characterize the networking requirements of the programs funded by the HEP and NP program offices. Several key findings resulted from the review. Among them: 1. The Large Hadron Collider?s ATLAS (A Toroidal LHC Apparatus) and CMS (Compact Muon Solenoid) experiments are adopting remote input/output (I/O) as a core component of their data analysis infrastructure. This will significantly increase their demands on the network from both a reliability perspective and a performance perspective. 2. The Large Hadron Collider (LHC) experiments (particularly ATLAS and CMS) are working to integrate network awareness into the workflow systems that manage the large number of daily analysis jobs (1 million analysis jobs per day for ATLAS), which are an integral part of the experiments. Collaboration with networking organizations such as ESnet, and the consumption of performance data (e.g., from perfSONAR [PERformance Service Oriented Network monitoring Architecture]) are critical to the success of these efforts. 3. The international aspects of HEP and NP collaborations continue to expand. This includes the LHC experiments, the Relativistic Heavy Ion Collider (RHIC) experiments, the Belle II Collaboration, the Large Synoptic Survey Telescope (LSST), and others. The international nature of these collaborations makes them heavily

  14. Human Requirements of Flight. Aerospace Education III. Instructional Unit IV.

    Science.gov (United States)

    Hall, Arthur D.

    This curriculum guide is prepared for the Aerospace Education III series publication entitled "Human Requirements of Flight." It provides specific guidelines for teachers using the textbook. The guidelines for each chapter are organized according to objectives (traditional and behavioral), suggested outline, orientation, suggested key points,…

  15. Human resources needs in the Canadian wind energy industry

    Energy Technology Data Exchange (ETDEWEB)

    Wittholz, H. [Synova International Business Development, London, ON (Canada)

    2005-07-01

    This paper reviewed human resources issues related to wind energy expansion. As the fastest growing energy source in the world, wind energy has the potential to provide thousands of jobs. With the signing of the Kyoto Protocol, the Canadian government and industry will take measures to increase the use of renewable energy. As such, forecasters predict that Canada's total installed capacity will increase from 444 MW in 2004 to 5,600 MW by 2012. Initially, employment opportunities will be in the service industry, followed by an increased demand for scientists, engineers, technicians and other personnel with specialized knowledge in the wind industry. This paper described the assumptions on which the forecasted demand for skilled labour is based. Approximately 2,230 technicians will be required by 2012 to develop and manufacture wind turbines and to establish an infrastructure that would maximize the benefits of the emerging industry for Canadians. Wind energy initiatives include the establishment of a competitive manufacturing and service base; the provision of specialized training and education to meet the human resources demands of the industry; and, support from research and development to reduce the knowledge gap between Canada and Europe. Canada also holds the potential to establish a niche market for hybrid wind-diesel-storage systems. Insurance companies and investors will require high standards to safeguard their investments. A breakdown of various jobs in the wind power industry was presented along with forecasts of revenues and employment in Canada's wind energy industry. This paper also outlined the wind energy research programs available at Canadian universities, colleges and institutes. It was recommended that education and training programs in this field of study should be developed based on proven programs with a governing body to ensure industry requirements are met. It was also suggested that partnerships should be formed with successful

  16. Food and nutritional security requires adequate protein as well as energy, delivered from whole-year crop production

    DEFF Research Database (Denmark)

    Coles, Graeme D; Wratten, Stephen D; Porter, John Roy

    2016-01-01

    Human food security requires the production of sufficient quantities of both high-quality protein and dietary energy. In a series of case-studies from New Zealand, we show that while production of food ingredients from crops on arable land can meet human dietary energy requirements effectively......, requirements for high-quality protein are met more efficiently by animal production from such land. We present a model that can be used to assess dietary energy and quality-corrected protein production from various crop and crop/animal production systems, and demonstrate its utility. We extend our analysis...... with an accompanying economic analysis of commercially-available, pre-prepared or simply-cooked foods that can be produced from our case-study crop and animal products. We calculate the per-person, per-day cost of both quality-corrected protein and dietary energy as provided in the processed foods. We conclude...

  17. Food and nutritional security requires adequate protein as well as energy, delivered from whole-year crop production

    DEFF Research Database (Denmark)

    Coles, Graeme D; Wratten, Stephen D; Porter, John Roy

    2016-01-01

    Human food security requires the production of sufficient quantities of both high-quality protein and dietary energy. In a series of case-studies from New Zealand, we show that while production of food ingredients from crops on arable land can meet human dietary energy requirements effectively......, requirements for high-quality protein are met more efficiently by animal production from such land. We present a model that can be used to assess dietary energy and quality-corrected protein production from various crop and crop/animal production systems, and demonstrate its utility. We extend our analysis...... with an accompanying economic analysis of commercially-available, pre-prepared or simply-cooked foods that can be produced from our case-study crop and animal products. We calculate the per-person, per-day cost of both quality-corrected protein and dietary energy as provided in the processed foods. We conclude...

  18. Human resources challenges for wind energy

    Energy Technology Data Exchange (ETDEWEB)

    Cottingham, C. [Electricity Sector Council, Ottawa, ON (Canada)

    2006-07-01

    The potential role of the Electricity Sector Council in wind power workforce development was reviewed. Canada is a major exporter of electricity, and production of electricity in the country has grown by 10 per cent in the last 10 years. The electric industry has become increasingly interested in the development of renewable and sustainable energy sources in order to reduce the environmental impacts of electricity production and use, as well to address potential supply shortages. However, total labour force growth in Canada is expected to drop to 0.5 per cent by 2010, and is expected to keep falling. Engineering and science enrolments in post-secondary institutions are declining. Many immigrants to Canada choose to settle in metropolitan areas, and only 4 in 10 immigrants are able to achieve validation of their credentials in the Canadian education system. One-third of Canadian employees are expected to retire in the next 8 years. The wind energy sector is the fastest growing energy source sector in Canada, and there are limited training facilities available. Competency profiles for roles in the industry are not clearly defined. Many provinces have very little development to support or sustain educational services for wind power training. This presentation suggested that the wind energy sector should prepare for the anticipated workforce shortage by planning training programs and building partnerships in workforce development. Investments in wind power research and development should have contract provisions regarding labour and skills development. Retiring electricity workers may provide a source of labour support. Sector councils provide a neutral forum for employers, educators, and employees, with a focus on human resource development for specific industry sectors. The councils represent an estimated 45 to 50 per cent of the labour market, and have significant federal funding. The Electricity Sector Council offers advanced career and workforce training; youth

  19. 'Energy landscapes': Meeting energy demands and human aspirations.

    Science.gov (United States)

    Blaschke, Thomas; Biberacher, Markus; Gadocha, Sabine; Schardinger, Ingrid

    2013-08-01

    Renewable energy will play a crucial role in the future society of the 21st century. The various renewable energy sources need to be balanced and their use carefully planned since they are characterized by high temporal and spatial variability that will pose challenges to maintaining a well balanced supply and to the stability of the grid. This article examines the ways that future 'energy landscapes' can be modelled in time and space. Biomass needs a great deal of space per unit of energy produced but it is an energy carrier that may be strategically useful in circumstances where other renewable energy carriers are likely to deliver less. A critical question considered in this article is whether a massive expansion in the use of biomass will allow us to construct future scenarios while repositioning the 'energy landscape' as an object of study. A second important issue is the utilization of heat from biomass energy plants. Biomass energy also has a larger spatial footprint than other carriers such as, for example, solar energy. This article seeks to provide a bridge between energy modelling and spatial planning while integrating research and techniques in energy modelling with Geographic Information Science. This encompasses GIS, remote sensing, spatial disaggregation techniques and geovisualization. Several case studies in Austria and Germany demonstrate a top-down methodology and some results while stepwise calculating potentials from theoretical to technically feasible potentials and setting the scene for the definition of economic potentials based on scenarios and assumptions.

  20. ECASTAR: Energy Conservation; an Assessment of Systems, Technologies and Requirements

    Science.gov (United States)

    1975-01-01

    A methodology for a systems approach display and assessment of the potential for energy conservation actions and the impacts of those actions was presented. The U.S. economy is divided into four sectors: energy industry, industry, residential/commercial and transportation. Each sector is assessed with respect to energy conservation actions and impacts. The four sectors are combined and three strategies for energy conservation actions for the combined sectors are assessed. The three strategies (national energy conservation, electrification and diversification) represent energy conservation actions for the near term (now to 1985), the mid term (1985 to 2000) and the far term (2000 and beyond). The assessment procedure includes input/output analysis to bridge the flows between the sectors, and net economics and net energetics as performance criteria for the conservation actions. Targets of opportunity for large net energy net energy savings and the application of technology to achieve these savings are discussed.

  1. Embodied energy of construction materials: integrating human and capital energy into an IO-based hybrid model.

    Science.gov (United States)

    Dixit, Manish K; Culp, Charles H; Fernandez-Solis, Jose L

    2015-02-01

    Buildings alone consume approximately 40% of the annual global energy and contribute indirectly to the increasing concentration of atmospheric carbon. The total life cycle energy use of a building is composed of embodied and operating energy. Embodied energy includes all energy required to manufacture and transport building materials, and construct, maintain, and demolish a building. For a systemic energy and carbon assessment of buildings, it is critical to use a whole life cycle approach, which takes into account the embodied as well as operating energy. Whereas the calculation of a building's operating energy is straightforward, there is a lack of a complete embodied energy calculation method. Although an input-output-based (IO-based) hybrid method could provide a complete and consistent embodied energy calculation, there are unresolved issues, such as an overdependence on price data and exclusion of the energy of human labor and capital inputs. This paper proposes a method for calculating and integrating the energy of labor and capital input into an IO-based hybrid method. The results demonstrate that the IO-based hybrid method can provide relatively complete results. Also, to avoid errors, the total amount of human and capital energy should not be excluded from the calculation.

  2. Energy Storage Requirements for Achieving 50% Penetration of Solar Photovoltaic Energy in California

    Energy Technology Data Exchange (ETDEWEB)

    Denholm, Paul; Margolis, Robert

    2016-09-01

    We estimate the storage required to enable PV penetration up to 50% in California (with renewable penetration over 66%), and we quantify the complex relationships among storage, PV penetration, grid flexibility, and PV costs due to increased curtailment. We find that the storage needed depends strongly on the amount of other flexibility resources deployed. With very low-cost PV (three cents per kilowatt-hour) and a highly flexible electric power system, about 19 gigawatts of energy storage could enable 50% PV penetration with a marginal net PV levelized cost of energy (LCOE) comparable to the variable costs of future combined-cycle gas generators under carbon constraints. This system requires extensive use of flexible generation, transmission, demand response, and electrifying one quarter of the vehicle fleet in California with largely optimized charging. A less flexible system, or more expensive PV would require significantly greater amounts of storage. The amount of storage needed to support very large amounts of PV might fit within a least-cost framework driven by declining storage costs and reduced storage-duration needs due to high PV penetration.

  3. Energy Storage Requirements for Achieving 50% Solar Photovoltaic Energy Penetration in California

    Energy Technology Data Exchange (ETDEWEB)

    Denholm, Paul; Margolis, Robert

    2016-08-01

    We estimate the storage required to enable PV penetration up to 50% in California (with renewable penetration over 66%), and we quantify the complex relationships among storage, PV penetration, grid flexibility, and PV costs due to increased curtailment. We find that the storage needed depends strongly on the amount of other flexibility resources deployed. With very low-cost PV (three cents per kilowatt-hour) and a highly flexible electric power system, about 19 gigawatts of energy storage could enable 50% PV penetration with a marginal net PV levelized cost of energy (LCOE) comparable to the variable costs of future combined-cycle gas generators under carbon constraints. This system requires extensive use of flexible generation, transmission, demand response, and electrifying one quarter of the vehicle fleet in California with largely optimized charging. A less flexible system, or more expensive PV would require significantly greater amounts of storage. The amount of storage needed to support very large amounts of PV might fit within a least-cost framework driven by declining storage costs and reduced storage-duration needs due to high PV penetration.

  4. Human Computer Interface Design Criteria. Volume 1. User Interface Requirements

    Science.gov (United States)

    2010-03-19

    2 entitled Human Computer Interface ( HCI )Design Criteria Volume 1: User Interlace Requirements which contains the following major changes from...MISSILE SYSTEMS CENTER Air Force Space Command 483 N. Aviation Blvd. El Segundo, CA 90245 4. This standard has been approved for use on all Space and...and efficient model of how the system works and can generalize this knowledge to other systems. According to Mayhew in Principles and Guidelines in

  5. Black Hole Firewalls Require Huge Energy of Measurement

    CERN Document Server

    Hotta, Masahiro; Funo, Ken

    2013-01-01

    The unitary moving mirror model is one of the best quantum systems for checking the reasoning of the firewall paradox in quantum black holes. The reasoning of Almheiri et al. inevitably raises a firewall paradox in the model. We resolve this paradox from the viewpoint of the energy cost of quantum measurements. No firewall with a deadly, huge energy flux appears, as long as the energy for the measurement is much smaller than the ultraviolet cutoff scale.

  6. Energy efficiency in future wireless networks: cognitive radio standardization requirements

    CSIR Research Space (South Africa)

    Masonta, M

    2012-09-01

    Full Text Available ] S. Ehsan and B. Hamdaoui, ?A Survey on Energy-Efficient Routing Techniques with QoS Assurances for Wireless Multimedia Sensor Net- works? IEEE Comm. Surv. & Tut., vol. 14, no. 2, pp. 265-278, 2012. [16] T. Watteyne, A. Molinaro, M.G. Richichi... in the wireless and wired networks by application of, e.g., energy-efficient routing protocols. In summary, the effective use of energy and opportunities for energy saving through CR are key aspects defining the shape of the final implementation of CR concept...

  7. Technical energy savings versus changes in human behaviour

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    1996-01-01

    the way into human satisfaction via energy services. Results of various analyses and field experiments show saving potentials for electricity of 50 - 80 per cents. Barriers for implementing these technical saving options are discussed. Also the necessity and potentials for changing behavioural or life......Energy savings seems to be the most environmentally benign element in an energy policy. The paper is a reflection on the work on saving energy both by improving technology and by adapting human daily behaviour. A simple model is suggested for the energy chain which converts the primary energy all...

  8. Human Security and Energy Security: A Sustainable Energy System as a Public Good

    NARCIS (Netherlands)

    Karlsson-Vinkhuyzen, S.I.S.E.; Jollands, N.

    2013-01-01

    This chapter is dedicated to the concept of human security and its link to energy and energy governance, particularly global energy governance. Through this focus emerges the need to look at the links between the concept of public goods and energy. Our starting argument is that conventional notions

  9. International Requirements for Large Integration of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Molina-Garcia, Angel; Hansen, Anca Daniela; Muljadi, Ed

    2017-01-01

    Most European countries have concerns about the integration of large amounts of renewable energy sources (RES) into electric power systems, and this is currently a topic of growing interest. In January 2008, the European Commission published the 2020 package, which proposes committing the European...... Union to a 20% reduction in greenhouse gas emissions, to achieve a target of deriving 20% of the European Union's final energy consumption from renewable sources, and to achieve 20% improvement in energy efficiency both by the year 2020 [1]. Member states have different individual goals to meet...

  10. International Requirements for Large Integration of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Molina-Garcia, Angel; Hansen, Anca Daniela; Muljadi, Ed

    2017-01-01

    Most European countries have concerns about the integration of large amounts of renewable energy sources (RES) into electric power systems, and this is currently a topic of growing interest. In January 2008, the European Commission published the 2020 package, which proposes committing the European...... Union to a 20% reduction in greenhouse gas emissions, to achieve a target of deriving 20% of the European Union's final energy consumption from renewable sources, and to achieve 20% improvement in energy efficiency both by the year 2020 [1]. Member states have different individual goals to meet...... these overall objectives, and they each need to provide a detailed roadmap describing how they will meet these legally binding targets [2]. At this time, RES are an indispensable part of the global energy mix, which has been partially motivated by the continuous increases in hydropower as well as the rapid...

  11. ECASTAR: Energy conservation. An assessment of systems, technologies and requirements

    Science.gov (United States)

    1975-01-01

    A methodology was presented for a systems approach to energy conservation actions and their potentials and impacts in the United States. Constraints affecting the approach were ranked, and the most important ones are the present economic and technical conditions. The following unresolved issues were identified: consumptive lifestyles vs. conservation ethic, environmental standards vs. energy conservation, capital availability, decentralization and vertical integration vs. centralization, fuel rich regions vs. fuel poor regions, supply vs. end use conservation, life cycle costing vs. initial cost, mandatory savings vs. voluntary savings, labor intensive vs. capital intensive, price control vs. free market. The following recommendations were made: provide action/impact assessment, establish regional energy centers, improve technology articulation with government, design total energy systems, utilize existing systems approach expertise.

  12. Experience with Energy Efficiency Requirements for Electrical Equipment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This publication has been produced as part of the work programme in support of the Gleneagles Plan of Action (GPOA), where the IEA was requested to 'undertake a study to review existing global appliance standards and codes'. In accordance with the G8 request, this study investigates the coverage and impact of forms of minimum energy performance standards (MEPS) and comparative energy labelling programmes; which comprise the cornerstone of most IEA countries national energy efficiency strategy. This scope also reflects governments' aspirations to achieve ambitious targets for reducing greenhouse gas emissions. As a result, this study does not address endorsement labelling and associated voluntary programmes, although these are also important policy tools for national energy efficiency strategies.

  13. Cupolas minimize the energy required to melt ferrous alloys

    Energy Technology Data Exchange (ETDEWEB)

    Draper, A B

    1979-05-01

    Historically the cupola has been the most effective furnace for melting cast irons. Although its supremacy was challenged by electric melting furnaces in the 1960's, persisting energy scarcity and high cost have encouraged a resurgence of interest in cupola technology. Using the optimum design features of modern cupolas and the best melting practices, they can achieve melting efficiencies of 45% or more based on the energy value of the original coal. In contrast, electric melting only uses 21% of the energy in coal. Despite these facts, many foundrymen fear that there will be problems because of poor metallurgical control if they use cupolas. Yet experience has proven otherwise. In terms of energy conservation and economy it is better to use large cupolas as scrap melters in the steel industry. Yet there is still a deep rooted prejudice against the cupola plus basic oxygen furnace route to steel making.

  14. Renewable Energy Requirement Guidance for EPACT 2005 and EO 13423

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-01-18

    Describes what counts toward the federal goals, the definition of "new" for renewable power/renewable energy certificate (REC) purchases, and what types of on-site projects will get double credit (Section 203 (C)).

  15. Recycling Energy to Restore Impaired Ankle Function during Human Walking

    NARCIS (Netherlands)

    Collins, S.H.; Kuo, A.D.

    2010-01-01

    Background: Humans normally dissipate significant energy during walking, largely at the transitions between steps. The ankle then acts to restore energy during push-off, which may be the reason that ankle impairment nearly always leads to poorer walking economy. The replacement of lost energy is nec

  16. The direct and indirect energy requirement of households in the European Union

    NARCIS (Netherlands)

    Reinders, Angelina H.M.E.; Vringer, K.; Blok, K.

    2003-01-01

    In this article we evaluate the average energy requirement of households in 11 EU member states. By investigating both the direct (electricity, natural gas, gasoline, etc.) and the indirect energy requirement, i.e. the energy embodied in consumer goods and services, we add to research done on only t

  17. Cognition and procedure representational requirements for predictive human performance models

    Science.gov (United States)

    Corker, K.

    1992-01-01

    Models and modeling environments for human performance are becoming significant contributors to early system design and analysis procedures. Issues of levels of automation, physical environment, informational environment, and manning requirements are being addressed by such man/machine analysis systems. The research reported here investigates the close interaction between models of human cognition and models that described procedural performance. We describe a methodology for the decomposition of aircrew procedures that supports interaction with models of cognition on the basis of procedures observed; that serves to identify cockpit/avionics information sources and crew information requirements; and that provides the structure to support methods for function allocation among crew and aiding systems. Our approach is to develop an object-oriented, modular, executable software representation of the aircrew, the aircraft, and the procedures necessary to satisfy flight-phase goals. We then encode in a time-based language, taxonomies of the conceptual, relational, and procedural constraints among the cockpit avionics and control system and the aircrew. We have designed and implemented a goals/procedures hierarchic representation sufficient to describe procedural flow in the cockpit. We then execute the procedural representation in simulation software and calculate the values of the flight instruments, aircraft state variables and crew resources using the constraints available from the relationship taxonomies. The system provides a flexible, extensible, manipulative and executable representation of aircrew and procedures that is generally applicable to crew/procedure task-analysis. The representation supports developed methods of intent inference, and is extensible to include issues of information requirements and functional allocation. We are attempting to link the procedural representation to models of cognitive functions to establish several intent inference methods

  18. Appetite and Energy Intake in Humans

    DEFF Research Database (Denmark)

    Sørensen, Lone Brinkmann

    on appetite sensations, ad libitum energy intake and gastro-intestinal satiety hormones. 3. To compare the effect of dark chocolate versus milk chocolate on appetite sensations and ad libitum energy intake. In paper 1, the participants who received sucrose supplements had lower ratings of fullness and higher...... ratings of prospective food consumption between lunch and dinner, and after dinner than the participants who received artificial sweetener supplements. Both groups had a high energy intake during the test day, but the sucrose supplements induced a higher energy intake, compared with the artificial...... sweetener supplements. In paper 2, the modified triacylglycerol salatrim did not reduce energy intake, compared with traditional fat, despite slightly higher ratings of fullness during the salatrim test day. The slight difference in fullness was not due to differences in gastro-intestinal satiety hormones...

  19. Revolutions in energy input and material cycling in Earth history and human history

    Science.gov (United States)

    Lenton, Timothy M.; Pichler, Peter-Paul; Weisz, Helga

    2016-04-01

    Major revolutions in energy capture have occurred in both Earth and human history, with each transition resulting in higher energy input, altered material cycles and major consequences for the internal organization of the respective systems. In Earth history, we identify the origin of anoxygenic photosynthesis, the origin of oxygenic photosynthesis, and land colonization by eukaryotic photosynthesizers as step changes in free energy input to the biosphere. In human history we focus on the Palaeolithic use of fire, the Neolithic revolution to farming, and the Industrial revolution as step changes in free energy input to human societies. In each case we try to quantify the resulting increase in energy input, and discuss the consequences for material cycling and for biological and social organization. For most of human history, energy use by humans was but a tiny fraction of the overall energy input to the biosphere, as would be expected for any heterotrophic species. However, the industrial revolution gave humans the capacity to push energy inputs towards planetary scales and by the end of the 20th century human energy use had reached a magnitude comparable to the biosphere. By distinguishing world regions and income brackets we show the unequal distribution in energy and material use among contemporary humans. Looking ahead, a prospective sustainability revolution will require scaling up new renewable and decarbonized energy technologies and the development of much more efficient material recycling systems - thus creating a more autotrophic social metabolism. Such a transition must also anticipate a level of social organization that can implement the changes in energy input and material cycling without losing the large achievements in standard of living and individual liberation associated with industrial societies.

  20. Meeting Human Reliability Requirements through Human Factors Design, Testing, and Modeling

    Energy Technology Data Exchange (ETDEWEB)

    R. L. Boring

    2007-06-01

    In the design of novel systems, it is important for the human factors engineer to work in parallel with the human reliability analyst to arrive at the safest achievable design that meets design team safety goals and certification or regulatory requirements. This paper introduces the System Development Safety Triptych, a checklist of considerations for the interplay of human factors and human reliability through design, testing, and modeling in product development. This paper also explores three phases of safe system development, corresponding to the conception, design, and implementation of a system.

  1. Experimental assessment of energy requirements and tool tip visibility for photoacoustic-guided endonasal surgery

    Science.gov (United States)

    Lediju Bell, Muyinatu A.; Dagle, Alicia B.; Kazanzides, Peter; Boctor, Emad M.

    2016-03-01

    Endonasal transsphenoidal surgery is an effective approach for pituitary adenoma resection, yet it poses the serious risk of internal carotid artery injury. We propose to visualize these carotid arteries, which are hidden by bone, with an optical fiber attached to a surgical tool and a transcranial ultrasound probe placed on the patient's temple (i.e. intraoperative photoacoustic imaging). To investigate energy requirements for vessel visualization, experiments were conducted with a phantom containing ex vivo sheep brain, ex vivo bovine blood, and 0.5-2.5 mm thick human cadaveric skull specimens. Photoacoustic images were acquired with 1.2-9.3 mJ laser energy, and the resulting vessel contrast was measured at each energy level. The distal vessel boundary was difficult to distinguish at the chosen contrast threshold for visibility (4.5 dB), which was used to determine the minimum energies for vessel visualization. The blood vessel was successfully visualized in the presence of the 0-2.0 mm thick sphenoid and temporal bones with up to 19.2 dB contrast. The minimum energy required ranged from 1.2-5.0 mJ, 4.2-5.9 mJ, and 4.6-5.2 mJ for the 1.0 temporal and 0-1.5 mm sphenoid bones, 1.5 mm temporal and 0-0.5 mm sphenoid bones, and 2.0 mm temporal and 0-0.5 mm sphenoid bones, respectively, which corresponds to a fluence range of 4-21 mJ/cm2. These results hold promise for vessel visualization within safety limits. In a separate experiment, a mock tool tip was placed, providing satisfactory preliminary evidence that surgical tool tips can be visualized simultaneously with blood vessels.

  2. Energy performance requirements using the cost-optimal methodology

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne; Thomsen, Kirsten Engelund

    2013-01-01

    The Concerted Action EPBD (CA EPBD) has the main objective of assisting the EU Member States (MS) transpose and implement the recast Directive 2010/31/EU on the Energy Performance of Buildings (EPBD), published on 19 May 2010, as well as the continued implementation of the actions initiated with ...... MS, plus Norway and Croatia....

  3. Energy performance requirements using the cost-optimal methodology

    DEFF Research Database (Denmark)

    Wittchen, Kim Bjarne; Thomsen, Kirsten Engelund

    2013-01-01

    The Concerted Action EPBD (CA EPBD) has the main objective of assisting the EU Member States (MS) transpose and implement the recast Directive 2010/31/EU on the Energy Performance of Buildings (EPBD), published on 19 May 2010, as well as the continued implementation of the actions initiated with ...

  4. Energy expenditure and food requirement of Cassin's Auklets provisioning nestlings

    NARCIS (Netherlands)

    Hodum, PJ; Sydeman, WJ; Visser, GH; Weathers, WW

    We used the doubly-labeled water technique to measure the field metabolic rate (FMR) of free-ranging adult Cassin's Auklets (Ptychoramphus aleuticus) that were provisioning half-grown nestlings. FMR averaged 3.68 +/- 0.38 mL CO(2) g(-1) hr(-1) (n = 9), which is equivalent to a daily energy

  5. Emerging Energy Requirements for Future C4ISR

    Science.gov (United States)

    2002-09-01

    fulfill the role once envisioned for the military energy depot. One proposed design is the pebble bed modular reactor ( PBMR ) under development by...designs. The PBMR and GT-MHR, coupled with a direct-cycle gas turbine generator, would have a thermal efficiency of about 42-45 percent and would produce

  6. Dynamic facades, the smart way of meeting the energy requirements

    DEFF Research Database (Denmark)

    Johnsen, Kjeld; Winther, Frederik Vilbrad

    2015-01-01

    The paper describes an innovative dynamic façade system, developed in cooperation between two industrial companies, the Danish Building Research Institute and Aalborg University, Den¬mark. The system, named Energy Frames, is a newly developed industrially produced façade system based on the exper......The paper describes an innovative dynamic façade system, developed in cooperation between two industrial companies, the Danish Building Research Institute and Aalborg University, Den¬mark. The system, named Energy Frames, is a newly developed industrially produced façade system based...... on the experiences of a number of specially designed solutions for significant individual buildings all over the world. As the demand for energy efficiency of buildings grows throughout Europe, the necessity of developing energy efficient building envelope solutions increases, whilst maintaining acceptable indoor...... climate conditions. The dynamic façades play an important role in this development as it optimizes the interaction with the external environment in close correlation with the demand from the building and the users....

  7. High Energy High Power Battery Exceeding PHEV40 Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Rempel, Jane [TIAX LLC, Lexington, MA (United States)

    2016-03-31

    TIAX has developed long-life lithium-ion cells that can meet and exceed the energy and power targets (200Wh/kg and 800W/kg pulse power) set out by DOE for PHEV40 batteries. To achieve these targets, we selected and scaled-up a high capacity version of our proprietary high energy and high power CAM-7® cathode material. We paired the cathode with a blended anode containing Si-based anode material capable of delivering high capacity and long life. Furthermore, we optimized the anode blend composition, cathode and anode electrode design, and selected binder and electrolyte compositions to achieve not only the best performance, but also long life. By implementing CAM-7 with a Si-based blended anode, we built and tested prototype 18650 cells that delivered measured specific energy of 198Wh/kg total energy and 845W/kg at 10% SOC (projected to 220Wh/kg in state-of-the-art 18650 cell hardware and 250Wh/kg in 15Ah pouch cells). These program demonstration cells achieved 90% capacity retention after 500 cycles in on-going cycle life testing. Moreover, we also tested the baseline CAM-7/graphite system in 18650 cells showing that 70% capacity retention can be achieved after ~4000 cycles (20 months of on-going testing). Ultimately, by simultaneously meeting the PHEV40 power and energy targets and providing long life, we have developed a Li-ion battery system that is smaller, lighter, and less expensive than current state-of-the-art Li-ion batteries.

  8. Energy requirements of lean and overweight women, assessed by indirect calorimetry

    NARCIS (Netherlands)

    Boer, de J.O.

    1985-01-01

    The prevalence of overweight in the developed world and the increased mortality and morbidity risk of overweight people stimulate research into the imbalance between energy intake and energy expenditure. Little information is available about the 24 hour energy expenditure and energy requirement of l

  9. 14 CFR 325.13 - Environmental evaluations and energy information not required.

    Science.gov (United States)

    2010-01-01

    ... Environmental evaluations and energy information not required. Notwithstanding any provision of part 312 or part... environmental evaluation or energy information with the application. ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Environmental evaluations and...

  10. The Giant Reed as an energy crop: assessing the energy requirements within its supply chain

    DEFF Research Database (Denmark)

    Rodias, Efthymis; Busato, P.; Bochtis, Dionysis

    2013-01-01

    Biomass energy is one form of renewable energy sources that are in the core of interesting for many researchers. There many different biomass sources that can be exploited for energy production, such as crop residues, waste materials, forestry residues and energy crops. Regarding energy crops......, there are many different types of crops significantly varies in terms of energy potential yields, production and provision methods, etc. To this end, a thoroughly assessment of the energy inputs and outputs of each potential energy crop is necessary. In this paper, the Giant Reed is evaluated energetically...... as a potential energy crop. The assessment regards a 10 year period. The considered energy elements include direct inputs (e.g. fuel consumption) as well as indirect inputs (e.g. embodied energy of materials and machinery). According to the results, the balance between the estimated total energy input...

  11. The Giant Reed as an energy crop: assessing the energy requirements within its supply chain

    DEFF Research Database (Denmark)

    Rodias, Efthymis; Busato, P.; Bochtis, Dionysis;

    2013-01-01

    Biomass energy is one form of renewable energy sources that are in the core of interesting for many researchers. There many different biomass sources that can be exploited for energy production, such as crop residues, waste materials, forestry residues and energy crops. Regarding energy crops, th...... and the expected energy output is positive, providing a proof for the sustainability of the tested crop for a 10 year exploitation period....

  12. The gas turbine - a bundle of energy - requires tender care

    Energy Technology Data Exchange (ETDEWEB)

    Saarinen, J.; Uronen, J.; Leisio, C. [ed.

    1997-11-01

    The ability of a power plant to generate energy economically depends to a great extent on the functioning of the turbine. These days, an increasingly large number of these power plant `motors` are gas turbines. IVO`s expertise in the operation, maintenance and repair of gas turbines is based on long practical experience and the company`s own research. And IVO is also no stranger to the design and construction of new gas turbine plants

  13. Cost optimal levels for energy performance requirements:Executive summary

    OpenAIRE

    Thomsen, Kirsten Engelund; Aggerholm, Søren; Kluttig-Erhorn, Heike; Erhorn, Hans; Poel, Bart; Hitchin, Roger

    2011-01-01

    This report summarises the work done within the Concerted Action EPBD from December 2010 to April 2011 in order to feed into the European Commission's proposal for a common European procedure for a Cost-Optimal methodology under the Directive on the Energy Performance of Buildings (recast) 2010/31/EU. This report summarises the work done within the Concerted Action EPBD from December 2010 to April 2011 in order to feed into the European Commission's proposal for a common European procedure...

  14. Food and nutritional security requires adequate protein as well as energy, delivered from whole-year crop production.

    Science.gov (United States)

    Coles, Graeme D; Wratten, Stephen D; Porter, John R

    2016-01-01

    Human food security requires the production of sufficient quantities of both high-quality protein and dietary energy. In a series of case-studies from New Zealand, we show that while production of food ingredients from crops on arable land can meet human dietary energy requirements effectively, requirements for high-quality protein are met more efficiently by animal production from such land. We present a model that can be used to assess dietary energy and quality-corrected protein production from various crop and crop/animal production systems, and demonstrate its utility. We extend our analysis with an accompanying economic analysis of commercially-available, pre-prepared or simply-cooked foods that can be produced from our case-study crop and animal products. We calculate the per-person, per-day cost of both quality-corrected protein and dietary energy as provided in the processed foods. We conclude that mixed dairy/cropping systems provide the greatest quantity of high-quality protein per unit price to the consumer, have the highest food energy production and can support the dietary requirements of the highest number of people, when assessed as all-year-round production systems. Global food and nutritional security will largely be an outcome of national or regional agroeconomies addressing their own food needs. We hope that our model will be used for similar analyses of food production systems in other countries, agroecological zones and economies.

  15. Long-term energy efficiency analysis requires solid energy statistics. The case of the German basic chemical industry

    Energy Technology Data Exchange (ETDEWEB)

    Saygin, D.; Worrell, E.; Weiss, M.; Patela, M.K. [Utrecht University, Copernicus Institute of Sustainable Development, Faculty of Geosciences, Heidelberglaan 2, 3584 CS Utrecht (Netherlands); Tam, C.; Trudeau, N. [International Energy Agency IEA, 9 rue de la Federation, 75739 Paris Cedex 15 (France); Gielen, D.J. [International Renewable Energy Agency IRENA, IITC, Robert-Schuman-Platz 3, 53175 Bonn (Germany)

    2012-08-15

    Analyzing the chemical industry's energy use is challenging because of the sector's complexity and the prevailing uncertainty in energy use and production data. We develop an advanced bottom-up model (PIE-Plus) which encompasses the energy use of the 139 most important chemical processes. We apply this model in a case study to analyze the German basic chemical industry's energy use and energy efficiency improvements in the period between 1995 and 2008. We compare our results with data from the German Energy Balances and with data published by the International Energy Agency (IEA). We find that our model covers 88% of the basic chemical industry's total final energy use (including non-energy use) as reported in the German Energy Balances. The observed energy efficiency improvements range between 2.2 and 3.5% per year, i.e., they are on the higher side of the values typically reported in literature. Our results point to uncertainties in the basic chemical industry's final energy use as reported in the energy statistics and the specific energy consumption values. More efforts are required to improve the quality of the national and international energy statistics to make them usable for reliable monitoring of energy efficiency improvements of the chemical industry.

  16. [Utilization of feed energy by growing pigs. 3. Energy requirement for the growth and fattening of pigs].

    Science.gov (United States)

    Hoffmann, L; Schiemann, R; Jentsch, W

    1979-02-01

    The test series for the investigation of the energy consumption of growing pigs of the breeds large white and improved land race pig as well as cross breeds of the two breeds in a total of 369 metabolism periods (as described in the first two pieces of information of this publication series -- Hoffmann and others, 1977 and Jentsch and Hoffmann, 1977) were statistically analysed for the purpose of the derivation of the energy requirement for maintenance and the partial energy requirement for growth in order to test the possibilities of the factorial analysis for the derivation of energy requirement values of growing pigs. The dependence of the maintenance requirement of growing pigs (investigations in the live weight range of 10 to 40 kg -- see 1st information--were made with boars those in the live weight range of 30 to 120 kg were made with gelded boars, 2nd information) on the live weight can best be characterised by applying a power exponent of 0,61 or 0,62 for the live weight. A definition is offered to be discussed for the energetic maintenance requirement of productive live stock and laboratory animals as a conventional value. The energy requirement values derived from the doubly-factorial statistical analysis show a satisfactory adaptation to the measured values as such concerning energy intake and observed growth performance of the test animals. The conclusion is drawn that the factorial analysis of the energy requirement (maintenance plus partial performances) results in a better estimate of the requirement of growing animals than the assessment according only to live weight and live weight increase without characterising the energy requirement for partial performances. This is important for the further working on and more exact definition of requirement norms.

  17. Application analysis of solar total energy systems to the residential sector. Volume II, energy requirements. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-01

    This project analyzed the application of solar total energy systems to appropriate segments of the residential sector and determined their market penetration potential. This volume covers the work done on energy requirements definition and includes the following: (1) identification of the single-family and multi-family market segments; (2) regionalization of the United States; (3) electrical and thermal load requirements, including time-dependent profiles; (4) effect of conservation measures on energy requirements; and (5) verification of simulated load data with real data.

  18. A hydrogen energy carrier. Volume 1: Summary. [for meeting energy requirements

    Science.gov (United States)

    Savage, R. L. (Editor); Blank, L. (Editor); Cady, T. (Editor); Cox, K. E. (Editor); Murray, R. (Editor); Williams, R. D. (Editor)

    1973-01-01

    The production, technology, transportation, and implementation of hydrogen into the energy system are discussed along with the fossil fuel cycle, hydrogen fuel cycle, and the demands for energy. The cost of hydrogen production by coal gasification; electrolysis by nuclear energy, and solar energy are presented. The legal aspects of a hydrogen economy are also discussed.

  19. Analysis of Marine Corps Renewable Energy Planning to Meet Installation Energy Security Requirements

    Science.gov (United States)

    2013-12-03

    zero energy status is within reach if Miramar implements the recommended measures, replaces all remaining natural gas with biogas , and completely...The Energy Journal , 19(3), 107– 131. McDonald, A., & Schrattenholzer, L. (2001). Learning rates for energy technologies. Energy Policy, 29(4), 255

  20. Attaining the Photometric Precision Required by Future Dark Energy Projects

    Energy Technology Data Exchange (ETDEWEB)

    Stubbs, Christopher

    2013-01-21

    This report outlines our progress towards achieving the high-precision astronomical measurements needed to derive improved constraints on the nature of the Dark Energy. Our approach to obtaining higher precision flux measurements has two basic components: 1) determination of the optical transmission of the atmosphere, and 2) mapping out the instrumental photon sensitivity function vs. wavelength, calibrated by referencing the measurements to the known sensitivity curve of a high precision silicon photodiode, and 3) using the self-consistency of the spectrum of stars to achieve precise color calibrations.

  1. Analysis of Marine Corps Renewable Energy Planning to Meet Installation Energy Security Requirements

    OpenAIRE

    Chisom, Christopher M.; Templeton, Jack C.

    2013-01-01

    Approved for public release; distribution is unlimited. The purpose of this thesis is to analyze Marine Corps installation energy consumption and the pursuit of increased renewable energy generation goals across Marine Corps installations. The main objective of this report is to determine the cost of interruption and the net present value (NPV) of renewable energy generation needed to meet the Marine Corps energy security objectives. First, we determine installation-specific energy consump...

  2. Research into energy and human settlements planning

    DEFF Research Database (Denmark)

    Rapporten bringer indlæg og referater af diskussionerne på et kollokvium afholdt som led i samarbejdet inden for FN's økonomiske kommission for Europa (ECE) i marts 1980. Hovedemnerne er energipolitik, regionale energi-scenarier, varmeplanlægning og transport. Rapporten er på engelsk....

  3. Appetite and Energy Intake in Humans

    DEFF Research Database (Denmark)

    Sørensen, Lone Brinkmann

    on appetite sensations, ad libitum energy intake and gastro-intestinal satiety hormones. 3. To compare the effect of dark chocolate versus milk chocolate on appetite sensations and ad libitum energy intake. In paper 1, the participants who received sucrose supplements had lower ratings of fullness and higher....... The data 7 indicated that there was no difference in fat absorption after the two fat rich meals, although this was not measured directly. In paper 3, higher ratings of satiety and lower ratings of hunger and prospective consumption were recorded after consumption of the dark chocolate than after the milk...... chocolate. Ratings of the desire to eat something sweet, salty, fatty, and savoury were all lower after consumption of the dark chocolate than after the milk chocolate. The results suggest that it could be beneficial to use dark chocolate as a substitute for milk chocolate. In summary, these results suggest...

  4. Human rights and the requirement for international medical aid.

    Science.gov (United States)

    Tolchin, Benjamin

    2008-08-01

    Every year approximately 18 million people die prematurely from treatable medical conditions including infectious diseases and nutritional deficiencies. The deaths occur primarily amongst the poorest citizens of poor developing nations. Various groups and individuals have advanced plans for major international medical aid to avert many of these unnecessary deaths. For example, the World Health Organization's Commission on Macroeconomics and Health estimated that eight million premature deaths could be prevented annually by interventions costing roughly US$57 bn per year. This essay advances an argument that human rights require high-income nations to provide such aid. The essay briefly examines John Rawls' obligations of justice and the reasons that their applicability to cases of international medical aid remains controversial. Regardless, the essay argues that purely humanitarian obligations bind the governments and citizens of high-income liberal democracies at a minimum to provide major medical aid to avert premature deaths in poor nations. In refusing to undertake such medical relief efforts, developed nations fail to adequately protect a fundamental human right to life.

  5. Understanding the Information Requirements of Arts and Humanities Scholarship

    Directory of Open Access Journals (Sweden)

    Agiatis Benardou

    2010-07-01

    Full Text Available This paper reports on research of scholarly research practices and requirements conducted in the context of the Preparing DARIAH European e-Infrastructures project, with a view to ensuring current and future fitness for purpose of the planned digital infrastructure, services and tools. It summarises the findings of earlier research, primarily from the field of human information behaviour as applied in scholarly work, it presents a conceptual perspective informed by cultural-historical activity theory, it introduces briefly a formal conceptual model for scholarly research activity compliant with CIDOC CRM, it describes the plan of work and methodology of an empirical research project based on open-questionnaire interviews with arts and humanities researchers, and presents illustrative examples of segmentation, tagging and initial conceptual analysis of the empirical evidence. Finally, it presents plans for future work, consisting, firstly, of a comprehensive re-analysis of interview segments within the framework of the scholarly research activity model, and, secondly, of the integration of this analysis with the extended digital curation process model we presented in earlier work.

  6. Global energy futures and human development: a framework for analysis

    Energy Technology Data Exchange (ETDEWEB)

    Pasternak, A.D. [Lawrence Livermore National Lab., CA (United States)

    2001-07-01

    This paper explores the relationship between measures of human well-being and consumption of energy and electricity. A correlation is shown between the United Nations Human Development Index (HDI) and annual per- capita electricity consumption for 60 populous countries comprising 90% of the world population. In this correlation, HDI reaches a maximum value when electricity consumption is about 4,000 kWh per person per year, well below consumption levels for most developed countries but also well above the level for developing countries. The correlation with electricity use is better than with total primary energy use. Global electricity consumption associated with a ''Human Development Scenario'' is estimated by adding to U.S. Department of Energy projections for the year 2020 increments of additional electricity consumption sufficient to reach 4,000 kWh per capita on a country-by-country basis. A roughly constant ratio of primary energy consumption to electric energy consumption is observed for countries with high levels of electricity use, and this ratio is used to estimate global primary energy consumption in the Human Development Scenario. The Human Development Scenario implies significantly greater global consumption of electricity and primary energy than do projections for 2020 by the DOE and others. (author)

  7. Case study of the Brownell low energy requirement house

    Energy Technology Data Exchange (ETDEWEB)

    Jones, R F; Krajewski, R F; Dennehy, G

    1979-05-01

    An evaluation is made of the design and thermal performance of an innovative house built in 1977 in the Adirondacks area of New York State. The house has a very tight and well-insulated envelope, with the rigid insulation board applied to the outside of the frame. Passive solar gain through south-facing glass, along with internal free sources of heat, are shown to provide a substantial part of the building's heating requirements. Effective integral thermal storage, provided by the exposed interior structure, serves to keep interior temperature excursions within acceptable limits. Additional remote storage is provided in the form of a large thermal storage sand bed, with air ducts, located below the basement floor. Calculations and measured performance data show that the house's space heating needs are only about 40% of those of a similar size house built to HUD minimum property standards, and less than 25% of those of a typical inventory house in the Northeast United States.

  8. Case study of the Brownell low energy requirement house

    Energy Technology Data Exchange (ETDEWEB)

    Jones, R F; Krajewski, R F; Dennehy, G

    1979-05-01

    An evaluation is made of the design and thermal performance of an innovative house built in 1977 in the Adirondacks area of New York State. The house has a very tight and well-insulated envelope, with the rigid insulation board applied to the outside of the frame. Passive solar gain through south-facing glass, along with internal free sources of heat, are shown to provide a substantial part of the building's heating requirements. Effective integral thermal storage, provided by the exposed interior structure, serves to keep interior temperature excursions within acceptable limits. Additional remote storage is provided in the form of a large thermal storage sand bed, with air ducts, located below the basement floor. Calculations and measured performance data show that the house's space heating needs are only about 40% of those of a similar size house built to HUD minimum property standards, and less than 25% of those of a typical inventory house in the Northeast United States.

  9. Extra-metabolic energy use and the rise in human hyper-density

    Science.gov (United States)

    Burger, Joseph R.; Weinberger, Vanessa P.; Marquet, Pablo A.

    2017-03-01

    Humans, like all organisms, are subject to fundamental biophysical laws. Van Valen predicted that, because of zero-sum dynamics, all populations of all species in a given environment flux the same amount of energy on average. Damuth’s ’energetic equivalence rule’ supported Van Valen´s conjecture by showing a tradeoff between few big animals per area with high individual metabolic rates compared to abundant small species with low energy requirements. We use metabolic scaling theory to compare variation in densities and individual energy use in human societies to other land mammals. We show that hunter-gatherers occurred at densities lower than the average for a mammal of our size. Most modern humans, in contrast, concentrate in large cities at densities up to four orders of magnitude greater than hunter-gatherers, yet consume up to two orders of magnitude more energy per capita. Today, cities across the globe flux greater energy than net primary productivity on a per area basis. This is possible by importing enormous amounts of energy and materials required to sustain hyper-dense, modern humans. The metabolic rift with nature created by modern cities fueled largely by fossil energy poses formidable challenges for establishing a sustainable relationship on a rapidly urbanizing, yet finite planet.

  10. Extra-metabolic energy use and the rise in human hyper-density

    Science.gov (United States)

    Burger, Joseph R.; Weinberger, Vanessa P.; Marquet, Pablo A.

    2017-01-01

    Humans, like all organisms, are subject to fundamental biophysical laws. Van Valen predicted that, because of zero-sum dynamics, all populations of all species in a given environment flux the same amount of energy on average. Damuth’s ’energetic equivalence rule’ supported Van Valen´s conjecture by showing a tradeoff between few big animals per area with high individual metabolic rates compared to abundant small species with low energy requirements. We use metabolic scaling theory to compare variation in densities and individual energy use in human societies to other land mammals. We show that hunter-gatherers occurred at densities lower than the average for a mammal of our size. Most modern humans, in contrast, concentrate in large cities at densities up to four orders of magnitude greater than hunter-gatherers, yet consume up to two orders of magnitude more energy per capita. Today, cities across the globe flux greater energy than net primary productivity on a per area basis. This is possible by importing enormous amounts of energy and materials required to sustain hyper-dense, modern humans. The metabolic rift with nature created by modern cities fueled largely by fossil energy poses formidable challenges for establishing a sustainable relationship on a rapidly urbanizing, yet finite planet. PMID:28252010

  11. Energy harvesting for human wearable and implantable bio-sensors.

    Science.gov (United States)

    Mitcheson, Paul D

    2010-01-01

    There are clear trade-offs between functionality, battery lifetime and battery volume for wearable and implantable wireless-biosensors which energy harvesting devices may be able to overcome. Reliable energy harvesting has now become a reality for machine condition monitoring and is finding applications in chemical process plants, refineries and water treatment works. However, practical miniature devices that can harvest sufficient energy from the human body to power a wireless bio-sensor are still in their infancy. This paper reviews the options for human energy harvesting in order to determine power availability for harvester-powered body sensor networks. The main competing technologies for energy harvesting from the human body are inertial kinetic energy harvesting devices and thermoelectric devices. These devices are advantageous to some other types as they can be hermetically sealed. In this paper the fundamental limit to the power output of these devices is compared as a function of generator volume when attached to a human whilst walking and running. It is shown that the kinetic energy devices have the highest fundamental power limits in both cases. However, when a comparison is made between the devices using device effectivenesses figures from previously demonstrated prototypes presented in the literature, the thermal device is competitive with the kinetic energy harvesting device when the subject is running and achieves the highest power density when the subject is walking.

  12. Students' Conceptions about Energy and the Human Body

    Science.gov (United States)

    Mann, Michael; Treagust, David F.

    2010-01-01

    Students' understanding of energy has been primarily within the domain of physics. This study sought to examine students' understanding of concepts relating to energy and the human body using pencil and paper questionnaires administered to 610 students in Years 8-12. From students' responses to the questionnaires, conceptual patterns were…

  13. Requirements of Integrated Design Teams While Evaluating Advanced Energy Retrofit Design Options in Immersive Virtual Environments

    Directory of Open Access Journals (Sweden)

    Xue Yang

    2015-12-01

    Full Text Available One of the significant ways to save energy use in buildings is to implement advanced energy retrofits in existing buildings. Improving energy performance of buildings through advanced energy retrofitting requires a clear understanding of the cost and energy implications of design alternatives from various engineering disciplines when different retrofit options are considered. The communication of retrofit design alternatives and their energy implications is essential in the decision-making process, as it affects the final retrofit selections and hence the energy efficiency of the retrofitted buildings. The objective of the research presented here was to identify a generic list of information requirements that are needed to be shared and collectively analyzed by integrated design teams during advanced energy retrofit design review meetings held in immersive settings. While identifying such requirements, the authors used an immersive environment based iterative requirements elicitation approach. The technology was used as a means to better identify the information requirements of integrated design teams to be analyzed as a group. This paper provides findings on information requirements of integrated design teams when evaluating retrofit options in immersive virtual environments. The information requirements were identified through interactions with sixteen experts in design and energy modeling domain, and validated with another group of participants consisting of six design experts who were experienced in integrated design processes. Industry practitioners can use the findings in deciding on what information to share with integrated design team members during design review meetings that utilize immersive virtual environments.

  14. Local Content Requirements in Renewable Energy Schemes - Government Procurement or a Violation of International Obligations?

    NARCIS (Netherlands)

    Verburg, Cornelis

    2017-01-01

    Numerous States have adopted renewable energy schemes aimed at incentivising investments in renewable energy generation capacity that contain local content requirements as an eligibility criterion to obtain support, such as a feed-in tariff. However, these requirements may violate the international

  15. Income Growth, Urbanization, Changing Life Style and Energy Requirements in China

    Institute of Scientific and Technical Information of China (English)

    Wang Yan; Shi Minjun

    2012-01-01

    This paper aims to estimate the effects of changing life style and consumption demands driven by income growth and urbanization on increase of energy requirements in China, and es- timate the impacts of improvement in household consumption on mitigating energy requirements towards 2020, based on input-out- put analysis and scenarios simulation approach. The result shows that energy requirement per capita has increased by 159% for urban residents and 147% for rural residents from 1995 to 2004. Growth in household consumption driven by income growth and urbanization may induce a successive increase in energy require- ments in future. Per capita energy requirements of urban residents will increase by 240% during 2002-2015 and 330% during 2002-2020. Urbanization might lead to 0.75 billion ton of increment of energy requirements in 2020. About 45%-48% of total energy requirements in China might be a consequence of residents' life styles and the economic activities to support consumption demands in 2020. Under low-carbon life style scenario, per capita energy requirements of urban residents may decline to 97% in 2015 and 92% in 2020 in contrast with baseline scenario. That implies that China needs to pay a great attention to developing green low- carbon life style in order to realize mitigation target towards 2020.

  16. Analysis of the electrical energy requirements of the GSI facility

    CERN Document Server

    Ripp, Christopher

    2013-01-01

    Die Veränderung auf dem deutschen Energiemarkt durch die Energiewende bringt eine Viel-zahl von Problemen mit sich. Der stetig ansteigende Ausbau von erneuerbaren Energien und die daraus resultierende starke Schwankung der eingespeisten Energiemengen zwingen die Netzbetreiber zum Ausbau der Stromnetze [1]. Die dadurch verursachten Kosten lassen die Netznutzungsgebühren steigen, welche an die Endkunden weitergegeben werden. Ebenfalls stieg die EEG-Umlage (Erneuerbare-Energie-Gesetz) von 3,6ct/kWh im Jahr 2012 über 5,3ct/kWh im Jahr 2013 auf 6,3ct/kWh für das Jahr 2014 [2], [3], [4]. Die extrem schnell steigenden Energiekosten zwingen die Verbraucher zur Erhöhung ihrer Energieeffizienz, um die laufenden Kosten so niedrig wie möglich zu halten [3]. Dies verlangt nach innovativen Ansätzen und Lösungen im unternehmenseigenen Energiemanagement. Besonders For-schungseinrichtungen mit großem Energiebedarf müssen eine höhere Energieeffizienz reali-sieren, um bei knappen Budgets ihrem Forschungsauftrag gerec...

  17. 10 CFR 905.17 - What are the requirements for the energy efficiency and/or renewable energy report (EE/RE report...

    Science.gov (United States)

    2010-01-01

    ... renewable energy report (EE/RE report) alternative? 905.17 Section 905.17 Energy DEPARTMENT OF ENERGY ENERGY... energy efficiency and/or renewable energy report (EE/RE report) alternative? (a) Requests to submit an EE..., including any requirements for documenting customer energy efficiency and renewable energy......

  18. Energy use pattern and optimization of energy required for broiler production using data envelopment analysis

    Directory of Open Access Journals (Sweden)

    Sama Amid

    2016-06-01

    Full Text Available A literature review shows that energy consumption in agricultural production in Iran is not efficient and a high degree of inefficiency in broiler production exists in Iran. Energy consumption of broiler production in Ardabil province of Iran was studied and the non-parametric method of data envelopment analysis (DEA was used to analyze energy efficiency, separate efficient from inefficient broiler producers, and calculate wasteful use of energy to optimize energy. Data was collected using face-to-face questionnaires from 70 broiler farmers in the study area. Constant returns to scale (CCR and variable returns to scale (BCC models of DEA were applied to assess the technical efficiency of broiler production. The results indicated that total energy use was 154,283 MJ (1000 bird−1 and the share of fuel at 61.4% was the highest of all inputs. The indices of energy efficiency, energy productivity, specific energy, and net energy were found to be 0.18, 0.02 kg MJ−1, 59.56 MJ kg−1, and −126,836 MJ (1000 bird−1, respectively. The DEA results revealed that 40% and 22.86% of total units were efficient based on the CCR and BCC models, respectively. The average technical, pure technical, and scale efficiency of broiler farmers was 0.88, 0.93, and 0.95, respectively. The results showed that 14.53% of total energy use could be saved by converting the present units to optimal conditions. The contribution of fuel input to total energy savings was 72% and was the largest share, followed by feed and electricity energy inputs. The results of this study indicate that there is good potential for increasing energy efficiency of broiler production in Iran by following the recommendations for efficient energy use.

  19. Development of enhanced piezoelectric energy harvester induced by human motion.

    Science.gov (United States)

    Minami, Y; Nakamachi, E

    2012-01-01

    In this study, a high frequency piezoelectric energy harvester converted from the human low vibrated motion energy was newly developed. This hybrid energy harvester consists of the unimorph piezoelectric cantilever and a couple of permanent magnets. One magnet was attached at the end of cantilever, and the counterpart magnet was set at the end of the pendulum. The mechanical energy provided through the human walking motion, which is a typical ubiquitous presence of vibration, is converted to the electric energy via the piezoelectric cantilever vibration system. At first, we studied the energy convert mechanism and the performance of our energy harvester, where the resonance free vibration of unimorph cantilever with one permanent magnet under a rather high frequency was induced by the artificial low frequency vibration. The counterpart magnet attached on the pendulum. Next, we equipped the counterpart permanent magnet pendulum, which was fluctuated under a very low frequency by the human walking, and the piezoelectric cantilever, which had the permanent magnet at the end. The low-to-high frequency convert "hybrid system" can be characterized as an enhanced energy harvest one. We examined and obtained maximum values of voltage and power in this system, as 1.2V and 1.2 µW. Those results show the possibility to apply for the energy harvester in the portable and implantable Bio-MEMS devices.

  20. Comparison of 2006 IECC and 2009 IECC Commercial Energy Code Requirements for Kansas City, MO

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Yunzhi; Gowri, Krishnan

    2011-03-22

    This report summarizes code requirements and energy savings of commercial buildings in climate zone 4 built to the 2009 IECC when compared to the 2006 IECC. In general, the 2009 IECC has higher insulation requirements for exterior walls, roof, and windows and have higher efficiency requirements for HVAC equipment (HVAC equipment efficiency requirements are governed by National Appliance Conversion Act of 1987 (NAECA), and are applicable irrespective of the IECC version adopted). The energy analysis results show that residential and nonresidential commercial buildings meeting the 2009 IECC requirements save between 6.1% and 9.0% site energy, and between 6.4% and 7.7% energy cost when compared to 2006 IECC. Analysis also shows that semiheated buildings have energy and cost savings of 3.9% and 5.6%.

  1. Energy-efficient Ship Operation – Training Requirements and Challenges

    Directory of Open Access Journals (Sweden)

    Michael Baldauf

    2013-06-01

    Full Text Available The International Maritime Organization (IMO, through its Maritime Environmental Protection Committee (MEPC, has been carrying out substantive work on the reduction and limitation of greenhouse gas emissions from international shipping since 1997, following the adoption of the Kyoto Protocol and the 1997 MARPOL Conference. While to date no mandatory GHG instrument for international shipping has been adopted, IMO has given significant consideration of the matter and has been working in accordance with an ambitious work plan with a view to adopting a package of technical provisions. Beside the efforts undertaken by IMO, it is assumed that e.g. optimized manoeuvring regimes have potential to contribute to a reduction of GHG emissions. Such procedures and supporting technologies can decrease the negative effects to the environment and also may reduce fuel consumption. However, related training has to be developed and to be integrated into existing course schemes accordingly. IMO intends to develop a Model Course aiming at promoting the energy-efficient operation of ships. This Course will contribute to the IMO’s environmental protection goals as set out in resolutions A.947(23 and A.998(25 by promulgating industry “best practices”, which reduce greenhouse gas emissions and the negative impact of global shipping on climate change. In this paper the outline of the research work will be introduced and the fundamental ideas and concepts are described. A concept for the overall structure and the development of suggested detailed content of the draft Model course will be exemplarily explained. Also, a developed draft module for the model course with samples of the suggested integrated practical exercises will be introduced and discussed. The materials and data in this publication have been obtained partly through capacity building research project of IAMU kindly supported by the International Association of Maritime Universities (IAMU and The Nippon

  2. Analysis of requirements for accelerating the development of geothermal energy resources in California

    Energy Technology Data Exchange (ETDEWEB)

    Fredrickson, C.D.

    1977-11-15

    Various resource data are presented showing that geothermal energy has the potential of satisfying a significant part of California's increasing energy needs. General factors slowing the development of geothermal energy in California are discussed and required actions to accelerate its progress are presented. Finally, scenarios for developing the most promising prospect in the state directed at timely on-line power are given. Specific actions required to realize each of these individual scenarios are identified.

  3. Analysis of requirements for accelerating the development of geothermal energy resources in California

    Science.gov (United States)

    Fredrickson, C. D.

    1978-01-01

    Various resource data are presented showing that geothermal energy has the potential of satisfying a singificant part of California's increasing energy needs. General factors slowing the development of geothermal energy in California are discussed and required actions to accelerate its progress are presented. Finally, scenarios for developing the most promising prospects in the state directed at timely on-line power are given. Specific actions required to realize each of these individual scenarios are identified.

  4. [Modern medical problems of energy exchange in humans].

    Science.gov (United States)

    Ivanov, K P

    2013-01-01

    In a living organism 72% of energy exchange occur in the visceral organs, which comprise only 5-6% of the total body mass. The remaining energy is spent at the expense of the skin, bones, connective tissues, resting muscles. The level ofenergy expenditure determines the general physiological state of a human organism, serves for the diagnostics of various diseases, in particular, the diseases of endocrine system, the disruptions of thermoregulation, protein, carbohydrate, and lipometabolism, etc. It should be mentioned that in modern textbooks of physiology, pathophysiology, and biology the problem of energy exchange in humans and animals is given inadequate consideration. Traditionally it occupies only 2-2.5% of the content. Meanwhile, new problems of energy exchange have appeared recently, which almost never were advanced earlier. These are,for example, the reasons and mechanisms of high energy expenditure under conditions of metabolism, the significance of the coefficient of efficiency of a human organism in physiology, special processes previously unknown of the organism heat exchange with the environment, physiological and social components of human energy exchange. There is also a problem of a theoretical possibility of life without energy.

  5. Understanding the human dimensions of a sustainable energy transition.

    Science.gov (United States)

    Steg, Linda; Perlaviciute, Goda; van der Werff, Ellen

    2015-01-01

    Global climate change threatens the health, economic prospects, and basic food and water sources of people. A wide range of changes in household energy behavior is needed to realize a sustainable energy transition. We propose a general framework to understand and encourage sustainable energy behaviors, comprising four key issues. First, we need to identify which behaviors need to be changed. A sustainable energy transition involves changes in a wide range of energy behaviors, including the adoption of sustainable energy sources and energy-efficient technology, investments in energy efficiency measures in buildings, and changes in direct and indirect energy use behavior. Second, we need to understand which factors underlie these different types of sustainable energy behaviors. We discuss three main factors that influence sustainable energy behaviors: knowledge, motivations, and contextual factors. Third, we need to test the effects of interventions aimed to promote sustainable energy behaviors. Interventions can be aimed at changing the actual costs and benefits of behavior, or at changing people's perceptions and evaluations of different costs and benefits of behavioral options. Fourth, it is important to understand which factors affect the acceptability of energy policies and energy systems changes. We discuss important findings from psychological studies on these four topics, and propose a research agenda to further explore these topics. We emphasize the need of an integrated approach in studying the human dimensions of a sustainable energy transition that increases our understanding of which general factors affect a wide range of energy behaviors as well as the acceptability of different energy policies and energy system changes.

  6. The importance of energy and nutrient supply in human brain evolution.

    Science.gov (United States)

    Cunnane, S C; Harbige, L S; Crawford, M A

    1993-01-01

    Current evolutionary theories do not adequately address the question of how the human brain evolved to be larger and more sophisticated than that of other primates. The human brain/body weight ratio is 4-5 times higher than in primates and, relative to the rest of the body, requires up to 10 times as much energy as in other land-based mammals. Human brain evolution must therefore have required a stable food supply providing a reliable source of both high dietary energy and a cluster of 'brain-specific' nutrients over a long period of time. These nutrient and energy requirements are available in the marine and shore-based food chain but are difficult if not impossible to obtain in the terrestrial food chain. We suggest that marine and estuarine ecosystems provided hominids with the appropriate stimulus to develop a relatively large brain. This occurred in conjunction with the evolution of other uniquely human features, particularly relative hairlessness, bipedalism and abundant neonatal subcutaneous fat. Invertebrates, molluscs, small or slow-moving fish, and marine algae would have provided a stable, abundant supply of energy, long chain polyunsaturates and other nutrients essential for the brain and would have done so with comparatively little mammalian competition. The land-water interface would thus have allowed the hominid brain to develop sufficient neurological complexity to enable sophisticated tool and behaviour patterns to evolve in humans as a natural sequel to such a biochemical and environmental stimulus.

  7. An Investigation into Energy Requirements and Conservation Techniques for Sustainable Buildings

    Science.gov (United States)

    Robitaille, Jad

    Traditionally, societies use to design their built environment in a way that was in line with the climate and the geographical location that they evolved in, thereby supporting sustainable lifestyles (i.e. thick walls with small windows in cold climates). With the industrial revolution and the heavy use and reliance on cheap fossil fuels, it can be argued that the built environment has become more focused on aesthetics and cost savings rather than on true sustainability. This, in turn, has led to energy intensive practices associated with the construction of homes, buildings, cities and megalopolises. Environmental concerns with regards to the future have pushed people, entities and industries to search for ways to decrease human's energy dependency and/or to supply the demand in ways that are deemed sustainable. Efforts to address this concern with respect to the built environment were translated into 'green buildings', sustainable building technologies and high performance buildings that can be rated and/or licensed by selected certifying bodies with varying metrics of building construction and performance. The growing number of such systems has brought real concerns: Do certified sustainable buildings really achieve the level of sustainability (i.e. performance) they were intended to? For the purpose of this study, buildings' energy consumption will be analysed, as it is one of the main drivers when taking into consideration greenhouse gas emissions. Heating and cooling in the residential and commercial/institutional sector, combined account for approximately a fifth of the secondary energy use in Canada. For this reason, this research aims at evaluating the main rating systems in Canada based on the efficacy of their rating systems' certification methodology and the weighting and comparison of energy requirements under each scheme. It has been proven through numerous studies that major energy savings can be achieved by focusing primarily on building designs

  8. 40 CFR 158.2083 - Experimental use permit biochemical pesticides human health assessment data requirements table.

    Science.gov (United States)

    2010-07-01

    ... pesticides human health assessment data requirements table. 158.2083 Section 158.2083 Protection of... determine the human health assessment data requirements for a particular biochemical pesticide product. (2.... Table—EUP Biochemical Pesticides Human Health Assessment Data Requirements Guideline Number Data...

  9. Do changes in regulatory requirements for energy efficiency in single-family houses result in the expected energy savings

    DEFF Research Database (Denmark)

    Kjærbye, Vibeke; Larsen, Anders; Togeby, Mikael

    2011-01-01

    This paper explores how changes in regulatory requirements for energy efficiency in buildings (in the US also known as building energy codes) affect household energy consumption. The focus in this paper is on natural gas consumption by Danish single-family owner-occupied houses. Unlike most other...... in energy used for heating. The latest revision of the Danish building regulation covered by this paper is that of 1998. This revision has resulted in a 7 pct. reduction in natural gas consumption. For comparison the ex ante expectation was 25 pct. reduction in heating demand...

  10. Adults in all body mass index categories underestimate daily energy requirements.

    Science.gov (United States)

    Headrick, Lauren B; Rowe, Cassie C; Kendall, Ashley R; Zitt, Michelle A; Bolton, Dawn L; Langkamp-Henken, Bobbi

    2013-01-01

    To compare the difference between self-reported and calculated daily energy requirements of adults within different body mass index (BMI) categories. Adults (n = 978) self-reported daily energy requirements, demographic information, and height, weight, age, and physical activity level (PAL) to calculate total energy expenditure. The main effects of BMI, gender, PAL, and dieting status on the difference between self-reported and calculated energy requirements for weight maintenance were significant (P requirements, but obese individuals underestimated to the greatest degree. Males, current dieters, and those who reported a low-active or active PAL underestimated to the greatest extent in each category. There is a lack of basic nutrition knowledge about personal energy needs in individuals across all BMI categories regardless of age, race/ethnicity, level of education, or work/training in a health-related field. Copyright © 2013 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  11. Influence of human genetic variation on nutritional requirements.

    Science.gov (United States)

    Stover, Patrick J

    2006-02-01

    Genetic variation is known to affect food tolerances among human subpopulations and may also influence dietary requirements, giving rise to the new field of nutritional genomics and raising the possibility of individualizing nutritional intake for optimal health and disease prevention on the basis of an individual's genome. However, because gene-diet interactions are complex and poorly understood, the use of genomic knowledge to adjust population-based dietary recommendations is not without risk. Whereas current recommendations target most of the population to prevent nutritional deficiencies, inclusion of genomic criteria may indicate subpopulations that may incur differential benefit or risk from generalized recommendations and fortification policies. Current efforts to identify gene alleles that affect nutrient utilization have been enhanced by the identification of genetic variations that have expanded as a consequence of selection under extreme conditions. Identification of genetic variation that arose as a consequence of diet as a selective pressure helps to identify gene alleles that affect nutrient utilization. Understanding the molecular mechanisms underlying gene-nutrient interactions and their modification by genetic variation is expected to result in dietary recommendations and nutritional interventions that optimize individual health.

  12. Estimation of energy requirements for mechanically ventilated, critically ill patients using nutritional status

    Science.gov (United States)

    Kan, Mee-Nin; Chang, Han-Hsin; Sheu, Woei-Fen; Cheng, Chien-Hsiang; Lee, Bor-Jen; Huang, Yi-Chia

    2003-01-01

    Background There is very little information on what is considered an adequate energy intake for mechanically ventilated, critically ill patients. The purpose of the present study was to determine this energy requirement by making use of patients' nutritional status. Methods The study was conducted in a multidisciplinary intensive care unit of Taichung Veterans General Hospital, Taiwan. Patients were hemodynamically stable and not comatose, and were requiring at least 7 days of mechanical ventilation. Fifty-four patients successfully completed this study. The resting energy expenditure was measured using indirect calorimetry. The total energy requirement was considered 120% of the measured energy expenditure. The daily nutrient intake was recorded. Nutritional status was assessed using single and multiple parameters, nitrogen balance, and medical records, and was performed within 24 hours of admission and after 7 days in the intensive care unit. Results Fifteen patients were being underfed (requirement), 20 patients were in the appropriate feeding (AF) group (within ± 10% of total energy requirement), and 19 patients received overfeeding (>110% of total energy requirement). Patients in the underfeeding group received only 68.3% of their energy requirement, while the overfeeding group patients received up to 136.5% of their required calories. Only patients in the AF group had a positive nitrogen balance (0.04 ± 5.1) on day 7. AF group patients had a significantly higher Nutritional Risk Index value at day 7 than at day 1. Conclusion AF patients had more improvement in nutritional status than patients in the other feeding groups. To provide at least 120% of the resting energy expenditure seemed adequate to meet the caloric energy needs of hemodynamically stable, mechanically ventilated, critically ill patients. PMID:12974978

  13. Recycling energy to restore impaired ankle function during human walking.

    Directory of Open Access Journals (Sweden)

    Steven H Collins

    Full Text Available BACKGROUND: Humans normally dissipate significant energy during walking, largely at the transitions between steps. The ankle then acts to restore energy during push-off, which may be the reason that ankle impairment nearly always leads to poorer walking economy. The replacement of lost energy is necessary for steady gait, in which mechanical energy is constant on average, external dissipation is negligible, and no net work is performed over a stride. However, dissipation and replacement by muscles might not be necessary if energy were instead captured and reused by an assistive device. METHODOLOGY/PRINCIPAL FINDINGS: We developed a microprocessor-controlled artificial foot that captures some of the energy that is normally dissipated by the leg and "recycles" it as positive ankle work. In tests on subjects walking with an artificially-impaired ankle, a conventional prosthesis reduced ankle push-off work and increased net metabolic energy expenditure by 23% compared to normal walking. Energy recycling restored ankle push-off to normal and reduced the net metabolic energy penalty to 14%. CONCLUSIONS/SIGNIFICANCE: These results suggest that reduced ankle push-off contributes to the increased metabolic energy expenditure accompanying ankle impairments, and demonstrate that energy recycling can be used to reduce such cost.

  14. Scavenging energy from the motion of human lower limbs via a piezoelectric energy harvester

    Science.gov (United States)

    Fan, Kangqi; Yu, Bo; Zhu, Yingmin; Liu, Zhaohui; Wang, Liansong

    2017-03-01

    Scavenging energy from human motion through piezoelectric transduction has been considered as a feasible alternative to batteries for powering portable devices and realizing self-sustained devices. To date, most piezoelectric energy harvesters (PEHs) developed can only collect energy from the uni-directional mechanical vibration. This deficiency severely limits their applicability to human motion energy harvesting because the human motion involves diverse mechanical motions. In this paper, a novel PEH is proposed to harvest energy from the motion of human lower limbs. This PEH is composed of two piezoelectric cantilever beams, a sleeve and a ferromagnetic ball. The two beams are designed to sense the vibration along the tibial axis and conduct piezoelectric conversion. The ball senses the leg swing and actuates the two beams to vibrate via magnetic coupling. Theoretical and experimental studies indicate that the proposed PEH can scavenge energy from both the vibration and the swing. During each stride, the PEH can produce multiple peaks in voltage output, which is attributed to the superposition of different excitations. Moreover, the root-mean-square (RMS) voltage output of the PEH increases when the walking speed ranges from 2 to 8 km/h. In addition, the ultra-low frequencies of human motion are also up-converted by the proposed design.

  15. Automated work packages architecture: An initial set of human factors and instrumentation and controls requirements

    Energy Technology Data Exchange (ETDEWEB)

    Agarwal, Vivek [Idaho National Lab. (INL), Idaho Falls, ID (United States); Oxstrand, Johanna H. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Le Blanc, Katya L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    The work management process in current fleets of national nuclear power plants is so highly dependent on large technical staffs and quality of work instruction, i.e., paper-based, that this puts nuclear energy at somewhat of a long-term economic disadvantage and increase the possibility of human errors. Technologies like mobile portable devices and computer-based procedures can play a key role in improving the plant work management process, thereby increasing productivity and decreasing cost. Automated work packages are a fundamentally an enabling technology for improving worker productivity and human performance in nuclear power plants work activities because virtually every plant work activity is accomplished using some form of a work package. As part of this year’s research effort, automated work packages architecture is identified and an initial set of requirements identified, that are essential and necessary for implementation of automated work packages in nuclear power plants.

  16. The Mass Flux of Non-renewable Energy for Humanity

    Science.gov (United States)

    Solomon, Edwin

    The global energy supply relies on non-renewable energy sources, coal, crude oil, and natural gas, along with nuclear power from uranium and these finite resources are located within the upper few kilometers of the Earth's crust. The total quantity of non-renewable energy resources consumed relative to the total quantity available is an essential question facing humanity. Analyses of energy consumption was conducted for the period 1800--2014 using data from the U. S. Energy Information Administration (EIA) and World Energy Production, 1800--1985 to determine the balance between non-renewable energy resources consumed and ultimately recoverable reserves. Annual energy consumption was plotted for each non-renewable resource followed by analyses to determine annual growth rates of consumption. Results indicated total energy consumption grew approximately exponentially 3.6% per year from 1800--1975 and was linear from 1975--2014. The ultimately recoverable reserves (URR) plus the total quantity consumed to date equals the total energy resource reserve prior to exploitation (7.15 x 1018 grams). Knowing the original resource quantity and the annual consumption and growth rates, we can forecast the duration of remaining resources using different scenarios. Alternatively, we can use population growth models and consumption trends to determine the per capita allocation trends and model that into the future. Alternative modeling of future resource allocation on a per capita bases suggests that resource lifetime may be significantly less than that predicted from consumption and production dynamics alone.

  17. Renewable energy data requirements: A review of user opinions and data collection efforts

    Energy Technology Data Exchange (ETDEWEB)

    Stevenson, G.G.

    1991-11-01

    Interest in the contribution of renewable energy to US energy supply is growing. This interest stems from environmental and energy security concerns and the desire to develop domestic resources. In order to plan for the use of renewable energy, data are essential to a variety of users both inside and outside the government. The purpose of this study is to identify priorities and requirements for gathering different types of renewable energy data. Results of this study are to be used by the US Department of Energy, Energy Information Administration (EIA), in planning and evaluating its ongoing and future renewable energy information programs. The types of renewable energy addressed in this study include biomass (wood, agricultural residues, and crops grown for energy), municipal solid waste, geothermal energy, solar energy, and wind. To assess the relative importance of different types of information, we reviewed existing renewable energy data collection efforts and asked the opinions of renewable energy data users. Individuals in government, private industry, research organizations, industry trade associations, and public interest research groups were contacted and questioned about particular renewable energy data items. An analysis of their responses provides the basis for the conclusions in this report. The types of information; about which we asked each respondent included resource stock and flow information; quantities of energy inputs (e.g., wood) and outputs (e.g., electricity, heat); energy input and output costs and prices; numbers, location, and production capacities of energy conversion facilities; quantities and costs of energy conversion equipment; and quantities of pollutant emissions from energy conversion. 5 refs., 25 tabs.

  18. Organizational Analysis of Energy Manpower Requirements in the United States Navy

    Science.gov (United States)

    2013-06-01

    culture whereby all personnel are stewards committed to sustainable energy management practices, and who value the efficient use of clean and...variable Calculus 14 -0) 3 Alte rtUt.te Courae Undergraduate Enclosure (4 1 -- -- ---- -- - -- -- ---- - ----------- ---- 60 --- Required

  19. Quantification of the energy required for the destruction of Balanus Amphitrite larva by ultrasonic treatment

    Digital Repository Service at National Institute of Oceanography (India)

    Seth, N.; Chakravarty, P.; Khandeparker, L.; Anil, A.C.; Pandit, A.B.

    organism. Since the power used and treatment time for disinfection are economically, and practically, the most important parameters, the energy required to pulverize the larvae into pieces less than equal to 30 mm was determined as a function...

  20. Requirements for supercomputing in energy research: The transition to massively parallel computing

    Energy Technology Data Exchange (ETDEWEB)

    1993-02-01

    This report discusses: The emergence of a practical path to TeraFlop computing and beyond; requirements of energy research programs at DOE; implementation: supercomputer production computing environment on massively parallel computers; and implementation: user transition to massively parallel computing.

  1. An Analysis of BIM Web Service Requirements and Design to Support Energy Efficient Building Lifecycle

    Directory of Open Access Journals (Sweden)

    Yufei Jiang

    2016-04-01

    Full Text Available Energy Efficient Building (EEB design, construction, and operations require the development and sharing of building information among different individuals, organizations, and computer applications. The Representational State Transfer (RESTful Building Information Modeling (BIM web service is a solution to enable an effective exchange of data. This paper presents an investigation into the core RESTful web service requirements needed to effectively support the EEB project lifecycle. The requirements include information exchange requirements, distributed collaboration requirements, internal data storage requirements, and partial model query requirements. We also propose a RESTful web service design model on different abstraction layers to enhance the BIM lifecycle in energy efficient building design. We have implemented a RESTful Application Program Interface (API prototype on a mock BIMserver to demonstrate our idea. We evaluate our design by conducting a user study based on the Technology Acceptance Model (TAM. The results show that our design can enhance the efficiency of data exchange in EEB design scenarios.

  2. Scotts Valley Energy Office and Human Capacity Building that will provide energy-efficiency services and develop sustainable renewable energy projects.

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Temashio [Scotts Valley Band of Pomo Indians

    2013-06-28

    The primary goal of this project is to develop a Scotts Valley Energy Development Office (SVEDO). This office will further support the mission of the Tribe's existing leadership position as the DOE Tribal Multi-County Weatherization Energy Program (TMCWEP) in creating jobs and providing tribal homes and buildings with weatherization assistance to increase energy efficiency, occupant comfort and improved indoor air quality. This office will also spearhead efforts to move the Tribe towards its further strategic energy goals of implementing renewable energy systems through specific training, resource evaluation, feasibility planning, and implementation. Human capacity building and continuing operations are two key elements of the SVEDO objectives. Therefore, the project will 1) train and employ additional Tribal members in energy efficiency, conservation and renewable resource analyses and implementation; 2) purchase materials and equipment required to implement the strategic priorities as developed by the Scotts Valley Tribe which specifically include implementing energy conservation measures and alternative energy strategies to reduce energy costs for the Tribe and its members; and 3) obtain a dedicated office and storage space for ongoing SVEDO operations.

  3. A rotary electromagnetic microgenerator for energy harvesting from human motions

    Directory of Open Access Journals (Sweden)

    Mehdi Niroomand

    2016-08-01

    Full Text Available In this paper, a rotary electromagnetic microgenerator is analyzed, designed and built. This microgenerator can convert human motions to electrical energy. The small size and use of a pendulum mechanism without gear are two main characteristics of the designed microgenerator. The generator can detect small vibrations and produce electrical energy. The performance of this microgenerator is evaluated by being installed peak-to-peak during normal walking. Also, the maximum harvested electrical energy during normal walking is around 416.6 μW. This power is sufficient for many applications.

  4. Addressing Control of Hazardous Energy (COHE) Requirements in a Laser Safety Program

    Energy Technology Data Exchange (ETDEWEB)

    Woods, Michael; /SLAC

    2012-02-15

    OSHA regulation 29CFR1910.147 specifies control of hazardous energy requirements for 'the servicing and maintenance of machines and equipment in which the unexpected energization or start up of the machines or equipment, or release of stored energy could cause injury to employees.' Class 3B and Class 4 laser beams must be considered hazardous energy sources because of the potential for serious eye injury; careful consideration is therefore needed to safely de-energize these lasers. This paper discusses and evaluates control of hazardous energy principles in this OSHA regulation, in ANSI Z136.1 ''Safe Use of Lasers,'' and in ANSI Z244.1 ''Control of Hazardous Energy, Lockout/Tagout and Alternative Methods.'' Recommendations are made for updating and improving CoHE (control of hazardous energy) requirements in these standards for their applicability to safe laser operations.

  5. Energy and lysine requirements and balances of sows during transition and lactation: A factorial approach

    DEFF Research Database (Denmark)

    Feyera, Takele; Theil, Peter Kappel

    2017-01-01

    This study aimed to quantify daily requirements for metabolizable energy (ME) and standard ileal digestible (SID) lysine in late gestating and lactating sows using a factorial approach. Metabolizable energy and SID lysine required for fetal and mammary growth, colostrum and milk production, uterine...... lysine and 14 MJ ME into the endogenous plasma pool during lactation. It was concluded that dramatic changes in energy and lysine requirements and balances occur during transition and lactation; that sows with high milk yield and /or low live weight require high SID lysine: ME ratio and that it would...... be beneficial to feed sows with two components at each meal to match the daily requirements for maintenance and production....

  6. A system for predicting energy and protein requirements of wild ruminants.

    Science.gov (United States)

    Hackmann, Timothy J

    2011-01-01

    Wild ruminants require energy and protein for the normal function. I developed a system for predicting these energy and protein requirements across ruminant species and life stages. This system defines requirements on the basis of net energy (NE), net protein (NP), and ruminally degraded protein (RDP). Total NE and NP requirements are calculated as the sum of NE and NP required for several functions (maintenance, activity, thermoregulation, gain, lactation, and gestation). To estimate the requirements for each function, I collected data predominantly for wild species and then formulated allometric and other equations that predict requirements across species. I estimated RDP requirements using an equation for cattle. I then related NE, NP, and RDP to quantities more practical for diet formulation (e.g. dry matter intake). I tabulated requirements over a range of body mass and life stages (neonate, juvenile, nonproductive adult, lactating adult, and gestating adult). Tabulated requirements suggest that adults at peak lactation require greatest quantities of energy and neonates generally require greatest quantities of protein, agreeing with suggestions that lactation is energetically expensive and protein is most limiting during growth. Equations used in this system were precise (allometric equations had R(2) generally ≥0.89 and coefficient of variation ruminants, showing that systems for wild ruminants should not extrapolate from requirements for domestic ruminants. One prominent system for wild ruminants predicted at times vastly different protein requirements from those predicted by the proposed system. The proposed system should be further evaluated and expanded to include other nutrients. © 2010 Wiley-Liss, Inc.

  7. Effect of energy and protein levels on nutrient utilization and their requirements in growing Murrah buffaloes.

    Science.gov (United States)

    Prusty, Sonali; Kundu, Shivlal Singh; Mondal, Goutam; Sontakke, Umesh; Sharma, Vijay Kumar

    2016-04-01

    To evaluate different levels of energy and protein for optimum growth of Murrah male buffalo calves, a growth trial (150 days) was conducted on 30 calves (body weight 202.5 ± 6.8 kg). Six diets were formulated to provide 90, 100 and 110% protein level and 90 and 110% energy level requirements for buffalo calves, derived from ICAR 2013 recommendations for buffaloes. The crude protein (CP) intake was increased with higher dietary CP, whereas no effect of energy levels or interaction between protein and energy was observed on CP intake. There were significant effects (P interaction between protein and energy (P nutrient intake (protein or energy) per kg body weight (BW)(0.75) at various fortnight intervals was regressed linearly from the average daily gain (ADG) per kg BW(0.75). By setting the average daily gain at zero in the developed regression equation, a maintenance requirement was obtained, i.e. 133.1 kcal ME, 6.45 g CP and 3.95 g metabolizable protein (MP) per kg BW(0.75). Requirement for growth was 6.12 kcal ME, 0.46 g CP and 0.32 g MP per kg BW(0.75) per day. Metabolizable amino acid requirement was estimated from partitioning of MP intake and ADG. The ME requirements were lower, whereas the MP requirement of Murrah buffaloes was higher than ICAR (2013) recommendations.

  8. Thirst for Power: Energy, Water and Human Survival

    Science.gov (United States)

    Webber, M.

    2016-12-01

    Energy, food and water are precious resources, and they are interconnected. The energy sector uses a lot of water, the food sector uses a lot of energy and water, the water sector uses a lot of energy, and as a nation we are contemplating a biofuels policy that uses food for energy. The thermoelectric power sector alone is the largest user of water in the U.S., withdrawing 200 billion gallons daily for powerplant cooling. Conversely, the water sector is responsible for over twelve percent of national energy consumption for moving, pumping, treating, and heating water. The food system uses over ten percent of national energy consumption. This interdependence means that droughts can cause energy shortages, and power outages can bring the water system to a halt, while energy and water challenges pose constraints to our food system. It also means that water efficiency is a pathway to energy efficiency and vice versa. This talk will give a big-picture overview of global food, energy and water trends to describe how they interact, what conflicts are looming, and how they can work together. This talk will include the vulnerabilities and cross-cutting solutions such as efficient markets and smart technologies that embed more information about resource management. It will include discussion of how population growth, economic growth, climate change, and short-sighted policies are likely to make things worse. Yet, more integrated planning with long-term sustainability in mind along with cultural shifts, advanced technologies, and better design can avert such a daunting future. Combining anecdotes and personal stories with insights into the latest science of energy and water, this talk will identify a hopeful path toward wise, long-range water-energy decisions and a more reliable and abundant future for humanity.

  9. Total energy requirements of shopping for food. [Supermarkets, Grocery Stores, Dairies, Butcheries, New Zealand

    Energy Technology Data Exchange (ETDEWEB)

    Patterson, M.G.; Earle, M.D.

    1982-12-01

    This survey investigated the total energy requirements of shopping for food in New Zealand. It is part of the Food Technology Research Centre's ongoing research into total energy use in the New Zealand food system. A sample survey of over 700 customers of 7 selected shops in Palmerston North was undertaken. An examination of the sample parameters and other factors indicate that the Palmerston North sample is probably representative of the national situation. However, there may be some need to verify this with other surveys particularly of large supermarkets. The primary objective of this survey was to determine representative energy intensities (MJ of energy per kilogram of food purchased) for the shopping step of the food chain. However, in the process much data were generated which may be of use and interest to a wider audience. These data include analysis of round trip distance, trip purpose, energy use per trip, characteristics of the shopping population, total transport cost of shopping, and purchase details. The mean energy intensity was found to be 13.21 MJ/kg (+- 7.7%). This energy intensity varied according to the shop type: Supermarkets (12.79 MJ/kg), Groceries (12.87 MJ/kg), Dairies (16.36 MJ/kg), Butcheries (16.35 MJ/kg) and Green groceries (7.17 MJ/kg). These energy intensities were found to very significantly according to the customer's sex and the shopping day. The total energy requirements of shopping for food in New Zealand were estimated to be 11.58 PJ/yr. Indirect energy requirements (energy embodied in the vehicles and transport infrastructures) were found to account for 63% of this total. The direct energy requirements (fuel) were estimated to be 4.3 PJ/yr ($70 million on 15 November 1981 costings).

  10. Energy Requirements of US Army Special Operation Forces During Military Training

    Directory of Open Access Journals (Sweden)

    Lee M. Margolis

    2014-05-01

    Full Text Available Special Operations Forces (SOF regularly engage in physically demanding combat operations and field training exercises, resulting in high daily energy expenditure, and thus increased energy requirements. However, the majority of studies assessing energy requirements of SOF have been conducted on soldiers going through intense SOF initiation training. The objective of the current investigation was to determine the energy expenditure of SOF conducting military training operations. Thirty-one soldiers taking part in Pre-Mission Training (PMT n = 15 and Combat Diver Qualification Courses (CDQC n = 16 volunteered to participate in this observational study. Energy expenditure was determined using doubly labeled water. Body weight (83 ± 7 kg remained stable during both training periods. Overall energy expenditure adjusted for body composition was 17,606 ± 2326 kJ·day−1. Energy expenditure was 19,110 ± 1468 kJ·day−1 during CDQC and 16,334 ± 2180 kJ·day−1 during PMT, with physical activity levels of 2.6 ± 0.2 and 2.2 ± 0.3 during CDQC and PMT, respectively. Compared to the Military Dietary Reference Intakes for energy (13,598 kJ·day−1, these data are in agreement with previous reports that energy requirement for SOF Soldiers exceed that of the average soldier.

  11. Investigation of Energy Storage Systems, Its Advantage and Requirement in Various Locations in Australia

    Directory of Open Access Journals (Sweden)

    Mohammad Taufiqul Arif

    2013-01-01

    Full Text Available Storage minimizes the intermittent nature of renewable sources. Solar and wind are the two fostered source of renewable energy. However, the availability of useful solar radiation and wind speed varies with geographical locations, and also the duration of this energy sources varies with seasonal variation. With the available vast open land and geographical position, Australia has great potential for both solar and wind energies. However, both these sources require energy buffering to support load demand to ensure required power quality. Electricity demand is increasing gradually, and also Australia has target to achieve 20% electricity from renewable sources by 2020. For effective utilization of solar and wind energy potential location of these sources needs to be identified, and effective size of storage needs to be estimated for best utilization according to the load demand. Therefore this paper investigated wind speed and solar radiation data of 210 locations in Australia, identified the potential locations, and estimated required storage in various potential locations to support residential load demand. Advantages of storage were analyzed in terms of loading on distribution transformer and storage support during energy fluctuation from renewable energy. Further analysis showed that storage greatly reduces greenhouse gas emission and reduces overall cost of energy by maximizing the use of solar and wind energies.

  12. Intense Collaboration: Human and Technical Requirements for Agile C2

    Science.gov (United States)

    2009-06-01

    2002). Training individuals for distributed teams: problem solving assessment for distributed mission research. Computers in Human Behavior 18...1999). Training team problem solving skills: An event-based approach. Computers in Human Behavior 15, 441-462.   22 Parasuraman, R., Sheridan

  13. Technical energy savings versus changes in human behaviour

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    1996-01-01

    the way into human satisfaction via energy services. Results of various analyses and field experiments show saving potentials for electricity of 50 - 80 per cents. Barriers for implementing these technical saving options are discussed. Also the necessity and potentials for changing behavioural or life...

  14. The gut microbiota in human energy homeostasis and obesity.

    Science.gov (United States)

    Rosenbaum, Michael; Knight, Rob; Leibel, Rudolph L

    2015-09-01

    Numerous studies of rodents suggest that the gut microbiota populations are sensitive to genetic and environmental influences, and can produce or influence afferent signals that directly or indirectly impinge on energy homeostatic systems affecting both energy balance (weight gain or loss) and energy stores. Fecal transplants from obese and lean human, and from mouse donors to gnotobiotic mice, result in adoption of the donor somatotype by the formerly germ-free rodents. Thus, the microbiota is certainly implicated in the development of obesity, adiposity-related comorbidities, and the response to interventions designed to achieve sustained weight reduction in mice. More studies are needed to determine whether the microbiota plays a similarly potent role in human body-weight regulation and obesity.

  15. The limits of human development and the use of energy and natural resources

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Rubens A.; Mattos, Cristiano R.; Balestieri, Jose A. [Energy Department, UNESP - Campus de Guaratingueta, Avenida Doutor Ariberto Pereira da Cunha, 333, P.O. Box 205, 12516-410, Guaratingueta, SP (Brazil)

    2006-06-15

    The development of nations is an unquestionable requirement. A lot of challenges concerning health, education and economy are present. A discussion on these development models has occupied the minds of decision makers in recent years. When energy supply and demand is considered, the situation becomes critical and the crucial question is: how to improve the quality of life of developing countries based on available models of development that are related to the life style of developed countries, for which the necessary use and waste of energy are present? How much energy is essential to humanity for not so as to endangering the survival conditions of future generations? The human development index (HDI) establishes the relationship among energy use, economic growth and social growth. Here it can be seen that 75% of the world population has a significant energy consumption potential. This is a strong reason to consider that the sustainable development concepts on energy policies are strategic to the future of the planet. This paper deals with the importance of seeking alternative development models for human development balance, natural resources conservation and environment through rational energy use concepts. (author)

  16. Reduction of water and energy requirement of algae cultivation using an algae biofilm photobioreactor.

    Science.gov (United States)

    Ozkan, Altan; Kinney, Kerry; Katz, Lynn; Berberoglu, Halil

    2012-06-01

    This paper reports the construction and performance of an algae biofilm photobioreactor that offers a significant reduction of the energy and water requirements of cultivation. The green alga Botryococcus braunii was cultivated as a biofilm. The system achieved a direct biomass harvest concentration of 96.4 kg/m(3) with a total lipid content 26.8% by dry weight and a productivity of 0.71 g/m(2) day, representing a light to biomass energy conversion efficiency of 2.02%. Moreover, it reduced the volume of water required to cultivate a kilogram of algal biomass by 45% and reduced the dewatering energy requirement by 99.7% compared to open ponds. Finally, the net energy ratio of the cultivation was 6.00 including dewatering. The current issues of this novel photobioreactor are also identified to further improve the system productivity and scaleup.

  17. Thirst for Power: Energy, Water and Human Survival

    Science.gov (United States)

    Webber, M.

    2015-12-01

    Energy and water are precious resources, and they are interconnected. The energy sector uses a lot of water -- the thermoelectric power sector alone is the largest user of water in the U.S., withdrawing 200 billion gallons daily for powerplant cooling. Conversely, the water sector is responsible for over twelve percent of national energy consumption for moving, pumping, treating, and heating water. This interdependence means that droughts can cause energy shortages, and power outages can bring the water system to a halt. It also means that water efficiency is a pathway to energy efficiency and vice versa. This talk will give a big-picture overview of global energy and water trends to describe how they interact, what conflicts are looming, and how they can work together. This talk will include the vulnerabilities and cross-cutting solutions such as efficient markets and smart technologies that embed more information about resource management. It will include discussion of how population growth, economic growth, climate change, and short-sighted policies are likely to make things worse. Yet, more integrated planning with long-term sustainability in mind along with cultural shifts, advanced technologies, and better design can avert such a daunting future. Combining anecdotes and personal stories with insights into the latest science of energy and water, this talk will identify a hopeful path toward wise, long-range water-energy decisions and a more reliable and abundant future for humanity.

  18. Role of leptin in energy homeostasis in humans

    Science.gov (United States)

    Rosenbaum, Michael; Leibel, Rudolph L

    2015-01-01

    The hyperphagia, low sympathetic nervous system tone, and decreased circulating concentrations of bioactive thyroid hormones that are common to states of congenital leptin deficiency and hypoleptinemia following and during weight loss suggest that the major physiological function of leptin is to signal states of negative energy balance and decreased energy stores. In weight-reduced humans, these phenotypes together with pronounced hypometabolism and increased parasympathetic nervous system tone create the optimal circumstance for weight regain. Based on the weight loss induced by leptin administration in states of leptin deficiency (obese) and observed similarity of phenotypes in states of congenital and dietary-induced states of hypoleptinemia (reduced obese), it has been suggested that exogenous leptin could potentially be useful in initiating, promoting, and sustaining weight reduction. However, the responses of human beings to exogenous leptin administration are dependent not only on extant energy stores but also on energy balance. Leptin administration to humans at usual weight has little, if any, effect on body weight while leptin administration during weight loss mitigates hunger, especially if given in supraphysiological doses during severe caloric restriction. Leptin repletion is most effective following weight loss by dietary restriction. In this state of weight stability but reduced energy stores, leptin at least partially reverses many of the metabolic, autonomic, neuroendocrine, and behavioral adaptations that favor weight regain. The major physiological function of leptin is to signal states of negative energy balance and decreased energy stores. Leptin, and pharmacotherapies affecting leptin signaling pathways, is likely to be most useful in sustaining weight loss. PMID:25063755

  19. Energy requirements in early life are similar for male and female goat kids.

    Science.gov (United States)

    Bompadre, T F V; Neto, O Boaventura; Mendonca, A N; Souza, S F; Oliveira, D; Fernandes, M H M R; Harter, C J; Almeida, A K; Resende, K T; Teixeira, I A M A

    2014-12-01

    Little is known about the gender differences in energetic requirements of goats in early life. In this study, we determined the energy requirements for maintenance and gain in intact male, castrated male and female Saanen goat kids using the comparative slaughter technique and provide new data on their body composition and energy efficiency. To determine the energy requirements for maintenance, we studied 21 intact males, 15 castrated males and 18 females (5.0±0.1 kg initial body weight (BW) and 23±5 d of age) using a split-plot design with the following main factors: three genders (intact males, castrated males, and females) and three dry matter intake levels (ad libitum, 75% and 50% of ad libitum intake). A slaughter group included three kids, one for each nutritional plane, of each gender, and all three animals within a group were slaughtered when the ad libitum kid reached 15 kg in BW. Net energy requirements for gain were obtained for 17 intact males, eight castrated males and 15 females (5.1±0.4 kg BW and 23±13 d of age). Animals were fed ad libitum and slaughtered when they reached 5, 10, and 15 kg in BW. A digestion trial was performed with nine kids of each gender to determine digestible energy, metabolizable energy and energy metabolizability of the diet. Our results show no effect of gender on the energy requirements for maintenance and gain, and overall net energy for maintenance was 205.6 kJ/kg(0.75) empty body weight gain (EBW) (170.3 kJ/kg(0.75) BW) from 5 to 15 kg BW. Metabolizable energy for maintenance was calculated by iteration, assuming heat production equal to metabolizable energy intake at maintenance, and the result was 294.34 kJ/kg(0.75) EBW and km of 0.70. As BW increased from 5 to 15 kg for all genders, the net energy required for gain increased from 9.5 to 12.0 kJ/g EBW gain (EWG), and assuming kg = 0.47, metabolizable energy for gain ranged from 20.2 to 25.5 kJ/g EWG. Our results indicate that it is not necessary to formulate diets

  20. Energy Requirements in Early Life Are Similar for Male and Female Goat Kids

    Science.gov (United States)

    Bompadre, T. F. V.; Neto, O. Boaventura; Mendonca, A. N.; Souza, S. F.; Oliveira, D.; Fernandes, M. H. M. R.; Harter, C. J.; Almeida, A. K.; Resende, K. T.; Teixeira, I. A. M. A.

    2014-01-01

    Little is known about the gender differences in energetic requirements of goats in early life. In this study, we determined the energy requirements for maintenance and gain in intact male, castrated male and female Saanen goat kids using the comparative slaughter technique and provide new data on their body composition and energy efficiency. To determine the energy requirements for maintenance, we studied 21 intact males, 15 castrated males and 18 females (5.0±0.1 kg initial body weight (BW) and 23±5 d of age) using a split-plot design with the following main factors: three genders (intact males, castrated males, and females) and three dry matter intake levels (ad libitum, 75% and 50% of ad libitum intake). A slaughter group included three kids, one for each nutritional plane, of each gender, and all three animals within a group were slaughtered when the ad libitum kid reached 15 kg in BW. Net energy requirements for gain were obtained for 17 intact males, eight castrated males and 15 females (5.1±0.4 kg BW and 23±13 d of age). Animals were fed ad libitum and slaughtered when they reached 5, 10, and 15 kg in BW. A digestion trial was performed with nine kids of each gender to determine digestible energy, metabolizable energy and energy metabolizability of the diet. Our results show no effect of gender on the energy requirements for maintenance and gain, and overall net energy for maintenance was 205.6 kJ/kg0.75 empty body weight gain (EBW) (170.3 kJ/kg0.75 BW) from 5 to 15 kg BW. Metabolizable energy for maintenance was calculated by iteration, assuming heat production equal to metabolizable energy intake at maintenance, and the result was 294.34 kJ/kg0.75 EBW and km of 0.70. As BW increased from 5 to 15 kg for all genders, the net energy required for gain increased from 9.5 to 12.0 kJ/g EBW gain (EWG), and assuming kg = 0.47, metabolizable energy for gain ranged from 20.2 to 25.5 kJ/g EWG. Our results indicate that it is not necessary to formulate diets with

  1. Energy Requirements in Early Life Are Similar for Male and Female Goat Kids

    Directory of Open Access Journals (Sweden)

    T. F. V. Bompadre

    2014-12-01

    Full Text Available Little is known about the gender differences in energetic requirements of goats in early life. In this study, we determined the energy requirements for maintenance and gain in intact male, castrated male and female Saanen goat kids using the comparative slaughter technique and provide new data on their body composition and energy efficiency. To determine the energy requirements for maintenance, we studied 21 intact males, 15 castrated males and 18 females (5.0±0.1 kg initial body weight (BW and 23±5 d of age using a split-plot design with the following main factors: three genders (intact males, castrated males, and females and three dry matter intake levels (ad libitum, 75% and 50% of ad libitum intake. A slaughter group included three kids, one for each nutritional plane, of each gender, and all three animals within a group were slaughtered when the ad libitum kid reached 15 kg in BW. Net energy requirements for gain were obtained for 17 intact males, eight castrated males and 15 females (5.1±0.4 kg BW and 23±13 d of age. Animals were fed ad libitum and slaughtered when they reached 5, 10, and 15 kg in BW. A digestion trial was performed with nine kids of each gender to determine digestible energy, metabolizable energy and energy metabolizability of the diet. Our results show no effect of gender on the energy requirements for maintenance and gain, and overall net energy for maintenance was 205.6 kJ/kg0.75 empty body weight gain (EBW (170.3 kJ/kg0.75 BW from 5 to 15 kg BW. Metabolizable energy for maintenance was calculated by iteration, assuming heat production equal to metabolizable energy intake at maintenance, and the result was 294.34 kJ/kg0.75 EBW and km of 0.70. As BW increased from 5 to 15 kg for all genders, the net energy required for gain increased from 9.5 to 12.0 kJ/g EBW gain (EWG, and assuming kg = 0.47, metabolizable energy for gain ranged from 20.2 to 25.5 kJ/g EWG. Our results indicate that it is not necessary to formulate

  2. Energy efficient reconcentration of diluted human urine using ion exchange membranes in bioelectrochemical systems.

    Science.gov (United States)

    Tice, Ryan C; Kim, Younggy

    2014-11-01

    Nutrients can be recovered from source separated human urine; however, nutrient reconcentration (i.e., volume reduction of collected urine) requires energy-intensive treatment processes, making it practically difficult to utilize human urine. In this study, energy-efficient nutrient reconcentration was demonstrated using ion exchange membranes (IEMs) in a microbial electrolysis cell (MEC) where substrate oxidation at the MEC anode provides energy for the separation of nutrient ions (e.g., NH4(+), HPO4(2-)). The rate of nutrient separation was magnified with increasing number of IEM pairs and electric voltage application (Eap). Ammonia and phosphate were reconcentrated from diluted human urine by a factor of up to 4.5 and 3.0, respectively (Eap = 1.2 V; 3-IEM pairs). The concentrating factor increased with increasing degrees of volume reduction, but it remained stationary when the volume ratio between the diluate (urine solution that is diluted in the IEM stack) and concentrate (urine solution that is reconcentrated) was 6 or greater. The energy requirement normalized by the mass of nutrient reconcentrated was 6.48 MJ/kg-N (1.80 kWh/kg-N) and 117.6 MJ/kg-P (32.7 kWh/kg-P). In addition to nutrient separation, the examined MEC reactor with three IEM pairs showed 54% removal of COD (chemical oxygen demand) in 47-hr batch operation. The high sulfate concentration in human urine resulted in substantial growth of both of acetate-oxidizing and H2-oxidizing sulfate reducing bacteria, greatly diminishing the energy recovery and Coulombic efficiency. However, the high microbial activity of sulfate reducing bacteria hardly affected the rate of nutrient reconcentration. With the capability to reconcentrate nutrients at a minimal energy consumption and simultaneous COD removal, the examined bioelectrochemical treatment method with an IEM application has a potential for practical nutrient recovery and sustainable treatment of source-separated human urine.

  3. Cost-optimal levels of minimum energy performance requirements in the Danish Building Regulations

    Energy Technology Data Exchange (ETDEWEB)

    Aggerholm, S.

    2013-09-15

    The purpose of the report is to analyse the cost optimality of the energy requirements in the Danish Building Regulations 2010, BR10 to new building and to existing buildings undergoing major renovation. The energy requirements in the Danish Building Regulations have by tradition always been based on the cost and benefits related to the private economical or financial perspective. Macro economical calculations have in the past only been made in addition. The cost optimum used in this report is thus based on the financial perspective. Due to the high energy taxes in Denmark there is a significant difference between the consumer price and the macro economical for energy. Energy taxes are also paid by commercial consumers when the energy is used for building operation e.g. heating, lighting, ventilation etc. In relation to the new housing examples the present minimum energy requirements in BR 10 all shows gaps that are negative with a deviation of up till 16 % from the point of cost optimality. With the planned tightening of the requirements to new houses in 2015 and in 2020, the energy requirements can be expected to be tighter than the cost optimal point, if the costs for the needed improvements don't decrease correspondingly. In relation to the new office building there is a gap of 31 % to the point of cost optimality in relation to the 2010 requirement. In relation to the 2015 and 2020 requirements there are negative gaps to the point of cost optimality based on today's prices. If the gaps for all the new buildings are weighted to an average based on mix of building types and heat supply for new buildings in Denmark there is a gap of 3 % in average for the new building. The excessive tightness with today's prices is 34 % in relation to the 2015 requirement and 49 % in relation to the 2020 requirement. The component requirement to elements in the building envelope and to installations in existing buildings adds up to significant energy efficiency

  4. FES Science Network Requirements - Report of the Fusion Energy Sciences Network Requirements Workshop Conducted March 13 and 14, 2008

    Energy Technology Data Exchange (ETDEWEB)

    Tierney, Brian; Dart, Eli; Tierney, Brian

    2008-07-10

    The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy Office of Science, the single largest supporter of basic research in the physical sciences in the United States of America. In support of the Office of Science programs, ESnet regularly updates and refreshes its understanding of the networking requirements of the instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 20 years. In March 2008, ESnet and the Fusion Energy Sciences (FES) Program Office of the DOE Office of Science organized a workshop to characterize the networking requirements of the science programs funded by the FES Program Office. Most sites that conduct data-intensive activities (the Tokamaks at GA and MIT, the supercomputer centers at NERSC and ORNL) show a need for on the order of 10 Gbps of network bandwidth for FES-related work within 5 years. PPPL reported a need for 8 times that (80 Gbps) in that time frame. Estimates for the 5-10 year time period are up to 160 Mbps for large simulations. Bandwidth requirements for ITER range from 10 to 80 Gbps. In terms of science process and collaboration structure, it is clear that the proposed Fusion Simulation Project (FSP) has the potential to significantly impact the data movement patterns and therefore the network requirements for U.S. fusion science. As the FSP is defined over the next two years, these changes will become clearer. Also, there is a clear and present unmet need for better network connectivity between U.S. FES sites and two Asian fusion experiments--the EAST Tokamak in China and the KSTAR Tokamak in South Korea. In addition to achieving its goal of collecting and characterizing the network requirements of the science endeavors funded by the FES Program Office, the workshop emphasized that there is a need for research into better ways of conducting remote

  5. Neuroendocrine alterations in the exercising human: implications for energy homeostasis.

    Science.gov (United States)

    Fuqua, John S; Rogol, Alan D

    2013-07-01

    Complex mechanisms exist in the human to defend against adverse effects of negative energy balance. These include alterations of hormone secretion affecting the growth hormone/insulin-like growth factor system, the adrenal axis, and the reproductive system, particularly in females. Energy deficits are least partially offset by neuroendocrine mechanisms regulating appetite and satiety. The complex feedback mechanisms reporting peripheral fat and energy stores to the central nervous system involve secretion of the peptide hormones leptin and ghrelin, which act centrally on neurons in the arcuate nucleus and anteroventral periventricular area. In addition to appetite regulation, these hormones exert influences on spatially and functionally-related mechanisms regulating reproductive function, such as the kisspeptin-gonadotropin releasing hormone system. Negative energy balance often occurs partially as a result of strenuous and repetitive physical exercise. Exercise stress leads to increased cortisol secretion, but this action is mediated through the induced negative energy balance. In healthy adults with energy deficits, this exercise-induced stress appears to be more important than pure psychological stress in impairing reproductive function. Estrogen deficiency resulting from negative energy balance has important adverse effects on bone density as well as bone microarchitecture, and it may also adversely affect markers of cardiovascular disease. Copyright © 2013 Elsevier Inc. All rights reserved.

  6. Human factors requirements for telerobotic command and control: The European Space Agency experimental programme

    Science.gov (United States)

    Stone, Robert J.

    1991-01-01

    Space Telerobotics research, performed under contract to the European Space Agency (ESA), concerning the execution of human factors experiments, and ultimately leading to the development of a telerobotics test bed, has been carried out since 1985 by a British Consortium consisting of British Aerospace, the United Kingdom Atomic Energy Authority and, more recently, the UK National Advanced Robotics Research Centre. The principal aim of the first study of the series was to derive preliminary requirements for a teleoperation servicing system, with reference to two mission model scenarios. The first scenario introduced the problem of communications time delays, and their likely effect on the ground-based operator in control of a manipulator system on board an unmanned servicing vehicle in Low Earth Orbit. In the second scenario, the operator was located on the NASA Orbiter aft flight deck, supervising the control of a prototype manipulator in the 'servicing' of an experimental payload in the cargo bay area. Human factors analyses centered on defining the requirements for the teleoperator workstation, such as identifying basic ergonomic requirements for workstation and panel layouts, defining teleoperation strategies, developing alphanumeric and graphic screen formats for the supervision or direct control of the manipulator, and the potential applications of expert system technology. The second study for ESA involved an experimental appraisal of some of the important issues highlighted in the first study, for which relevant human factors data did not exist. Of central importance during the second study was the issue of communications time delays and their effect on the manual control of a teleoperated manipulator from a ground-based command and control station.

  7. Dialogue on Climate, Water, Energy and Human Security in Africa

    Science.gov (United States)

    2014-07-01

    and  modern  biomass  energy  (ethanol,  biodiesel  and  biogas ).  Traditional biomass energy  support  livelihoods  for  the populations  in  rural...vii Coe, Michael; Foley, Jonathan (2001): Human and natural impacts on the water resources of the Lake Chad  basin. In:  Journal  of Geophysical

  8. Why a True Account of Human Development Requires Exemplar Research

    Science.gov (United States)

    Damon, William; Colby, Anne

    2013-01-01

    This chapter uses moral psychology to illustrate why exemplar methods are essential for building a valid, complete understanding of key domains of human development. Social psychological, economic, and biological-evolutionary paradigms for studying morality rely on samples drawn from the general population. This research reveals a bleak picture of…

  9. Why a True Account of Human Development Requires Exemplar Research

    Science.gov (United States)

    Damon, William; Colby, Anne

    2013-01-01

    This chapter uses moral psychology to illustrate why exemplar methods are essential for building a valid, complete understanding of key domains of human development. Social psychological, economic, and biological-evolutionary paradigms for studying morality rely on samples drawn from the general population. This research reveals a bleak picture of…

  10. Constellation Program Human-System Integration Requirements. Revision E, Nov. 19, 2010

    Science.gov (United States)

    Dory, Jonathan

    2010-01-01

    The Human-Systems Integration Requirements (HSIR) in this document drive the design of space vehicles, their systems, and equipment with which humans interface in the Constellation Program (CxP). These requirements ensure that the design of Constellation (Cx) systems is centered on the needs, capabilities, and limitations of the human. The HSIR provides requirements to ensure proper integration of human-to-system interfaces. These requirements apply to all mission phases, including pre-launch, ascent, Earth orbit, trans-lunar flight, lunar orbit, lunar landing, lunar ascent, Earth return, Earth entry, Earth landing, post-landing, and recovery. The Constellation Program must meet NASA's Agency-level human rating requirements, which are intended to ensure crew survival without permanent disability. The HSIR provides a key mechanism for achieving human rating of Constellation systems.

  11. Minimum energy requirement of an endoreversible desalination system of sea water

    Directory of Open Access Journals (Sweden)

    Lingen Chen, Liwei Shu, Yanlin Ge, Fengrui Sun

    2015-01-01

    Full Text Available A model of a typical endoreversible desalination system of sea water is established and the minimum energy requirement for the system is optimized by using finite time thermodynamic theory. The heat exchange between the endoreversible desalination system of sea water and surroundings are delivered by two endoreversible Carnot heat pumps and three endoreversible Carnot heat engines. The minimum energy requirement for the system can be found by subtracting the power outputs from the power inputs. The results show that the minimum energy requirement for the distillation system depends on not only the properties of the input saline water, the output pure water and the brine water, but also the inherent features of the heat pumps and the heat engines, i.e. the total heat conductance of the heat pumps and of the heat engines. The results obtained herein are closer to those of practical system than those obtained based on reversible model.

  12. Revision of the Energy-Efficiency Requirements in the Manufactured Home Construction and Safety Standards

    Energy Technology Data Exchange (ETDEWEB)

    Conner, Craig C.; Dillon, Heather E.; Lucas, Robert G.; Lubliner, Michael

    2004-06-01

    Energy-efficiency requirements were developed for manufactured (mobile) homes, which are regulated by the U.S. Department of Housing and Urban Development. A life-cycle cost analysis from the homeowner's perspective was used to establish parameters for a least-cost home in a large number of cities. Economic, financial, and energy-efficiency measures for the life-cycle cost analysis were selected and documented. The resulting energy-efficiency levels were aggregated to zones that were expressed as a maximum overall home U-factor (thermal transmittance) requirement for the building envelope. The proposed revised standard's costs, benefits, and net value to the consumer were quantified. This analysis updates a similar effort completed in 1992, which was the basis for the existing HUD code overall U-factor requirement.

  13. [Energy requirements in adolescents playing basketball in Russian Olympic reserve team].

    Science.gov (United States)

    Martinchik, A N; Baturin, A K; Petukhov, A B; Baeva, V S; Zemlianskaia, T A; Sokolov, A I; Peskova, E V; Tysiachnaia, E M

    2003-01-01

    The energy expenditure and requirements and dietary intake were studied in basketball players aged 14-16 years during 3 week-training period. The subjects of study were 14 boys and 18 girls as of the members of reserve of Russian Olympic basketball team. The dietary intake was estimated by dietary record of all food consumed within 24 hours last 7 days of training period. The energy expenditure was estimated by registration of time on different physical activity of team and multiplication on physical activity coefficient. The decrease of body mass and body mass index were observed in boys with height 195 cm and more to the end of training period. These tall boys did not consume enough food to satisfy the estimated energy requirement. It is estimated that energy need of tall basketball players is no less then 5000 kcal for boys and 3100 kcal for girls.

  14. Dynamics of energy harvesting backpack with human being interaction

    Science.gov (United States)

    Yuan, Yue; Zuo, Lei

    2016-04-01

    In last ten years, a lot of researchers have begun to look into obtaining electricity from the movement between human and their backpack that occurs during walking. In this paper, an innovative, elastically-suspended backpack with mechanical motion rectifier (MMR) based energy harvester is developed to generate electricity with high efficiency and reliability. Up to 28 Watts peak electrical power can be produced by the MMR based backpack energy harvester. A dynamic model for the system is presented along with experimental results. Three dual mass models for different distinct harvesters: pure viscous, non MMR, and MMR, are proposed, and a comparison in the output power and human comfort between the three models is discussed.

  15. Required Assets for a Nuclear Energy Applied R&D Program

    Energy Technology Data Exchange (ETDEWEB)

    Harold F. McFarlane; Craig L. Jacobson

    2009-03-01

    This report is one of a set of three documents that have collectively identified and recommended research and development capabilities that will be required to advance nuclear energy in the next 20 to 50 years. The first report, Nuclear Energy for the Future: Required Research and Development Capabilities—An Industry Perspective, was produced by Battelle Memorial Institute at the request of the Assistant Secretary of Nuclear Energy. That report, drawn from input by industry, academia, and Department of Energy laboratories, can be found in Appendix 5.1. This Idaho National Laboratory report maps the nuclear-specific capabilities from the Battelle report onto facility requirements, identifying options from the set of national laboratory, university, industry, and international facilities. It also identifies significant gaps in the required facility capabilities. The third document, Executive Recommendations for Nuclear R&D Capabilities, is a letter report containing a set of recommendations made by a team of senior executives representing nuclear vendors, utilities, academia, and the national laboratories (at Battelle’s request). That third report can be found in Appendix 5.2. The three reports should be considered as set in order to have a more complete picture. The basis of this report was drawn from three sources: previous Department of Energy reports, workshops and committee meetings, and expert opinion. The facilities discussed were winnowed from several hundred facilities that had previously been catalogued and several additional facilities that had been overlooked in past exercises. The scope of this report is limited to commercial nuclear energy and those things the federal government, or more specifically the Office of Nuclear Energy, should do to support its expanded deployment in order to increase energy security and reduce carbon emissions. In the context of this report, capabilities mean innovative, well-structured research and development programs

  16. The human genome: Some assembly required. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The Human Genome Project promises to be one of the most rewarding endeavors in modern biology. The cost and the ethical and social implications, however, have made this project the source of considerable debate both in the scientific community and in the public at large. The 1994 Graduate Student Symposium addresses the scientific merits of the project, the technical issues involved in accomplishing the task, as well as the medical and social issues which stem from the wealth of knowledge which the Human Genome Project will help create. To this end, speakers were brought together who represent the diverse areas of expertise characteristic of this multidisciplinary project. The keynote speaker addresses the project`s motivations and goals in the larger context of biological and medical sciences. The first two sessions address relevant technical issues, data collection with a focus on high-throughput sequencing methods and data analysis with an emphasis on identification of coding sequences. The third session explores recent advances in the understanding of genetic diseases and possible routes to treatment. Finally, the last session addresses some of the ethical, social and legal issues which will undoubtedly arise from having a detailed knowledge of the human genome.

  17. The Contribution of Environmental Siting and Permitting Requirements to the Cost of Energy for Wave Energy Devices

    Energy Technology Data Exchange (ETDEWEB)

    Copping, Andrea E.; Geerlofs, Simon H.; Hanna, Luke A.

    2014-06-30

    Responsible deployment of marine and hydrokinetic (MHK) devices in estuaries, coastal areas, and major rivers requires that biological resources and ecosystems be protected through siting and permitting (consenting) processes. Scoping appropriate deployment locations, collecting pre-installation (baseline) and post-installation data all add to the cost of developing MHK projects, and hence to the cost of energy. Under the direction of the U.S. Department of Energy, Pacific Northwest National Laboratory scientists have developed logic models that describe studies and processes for environmental siting and permitting. Each study and environmental permitting process has been assigned a cost derived from existing and proposed tidal, wave, and riverine MHK projects. Costs have been developed at the pilot scale and for commercial arrays for a surge wave energy converter

  18. The Contribution of Environmental Siting and Permitting Requirements to the Cost of Energy for Wave Energy Devices

    Energy Technology Data Exchange (ETDEWEB)

    Copping, Andrea E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Geerlofs, Simon H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hanna, Luke A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-06-01

    Responsible deployment of marine and hydrokinetic (MHK) devices in estuaries, coastal areas, and major rivers requires that biological resources and ecosystems be protected through siting and permitting (consenting) processes. Scoping appropriate deployment locations, collecting pre-installation (baseline) and post-installation data all add to the cost of developing MHK projects, and hence to the cost of energy. Under the direction of the U.S. Department of Energy, Pacific Northwest National Laboratory scientists have developed logic models that describe studies and processes for environmental siting and permitting. Each study and environmental permitting process has been assigned a cost derived from existing and proposed tidal, wave, and riverine MHK projects. Costs have been developed at the pilot scale and for commercial arrays for a surge wave energy converter

  19. IMPACT OF ENERGY GROUP STRUCTURE ON NUCLEAR DATA TARGET ACCURACY REQUIREMENTS FOR ADVANCED REACTOR SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    G. Palmiotti; M. Salvatores; H. Hiruta

    2011-06-01

    A target accuracy assessment study using both a fine and a broad energy structure has shown that less stringent nuclear data accuracy requirements are needed for the latter energy structure. However, even though a reduction is observed, still the requirements will be very difficult to be met unless integral experiments are also used to reduce nuclear data uncertainties. Target accuracy assessment is the inverse problem of the uncertainty evaluation. To establish priorities and target accuracies on data uncertainty reduction, a formal approach can be adopted by defining target accuracy on design parameters and finding out required accuracy on data in order to meet them. In fact, the unknown uncertainty data requirements can be obtained by solving a minimization problem where the sensitivity coefficients in conjunction with the constraints on the integral parameters provide the needed quantities for finding the solutions.

  20. IMPACT OF ENERGY GROUP STRUCTURE ON NUCLEAR DATA TARGET ACCURACY REQUIREMENTS FOR ADVANCED REACTOR SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    G. Palmiotti; M. Salvatores; H. Hiruta

    2011-06-01

    A target accuracy assessment study using both a fine and a broad energy structure has shown that less stringent nuclear data accuracy requirements are needed for the latter energy structure. However, even though a reduction is observed, still the requirements will be very difficult to be met unless integral experiments are also used to reduce nuclear data uncertainties. Target accuracy assessment is the inverse problem of the uncertainty evaluation. To establish priorities and target accuracies on data uncertainty reduction, a formal approach can be adopted by defining target accuracy on design parameters and finding out required accuracy on data in order to meet them. In fact, the unknown uncertainty data requirements can be obtained by solving a minimization problem where the sensitivity coefficients in conjunction with the constraints on the integral parameters provide the needed quantities for finding the solutions.

  1. Air-conditioning in the 21st century: impact on human productivity and energy consumption

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2000-01-01

    environment on human productivity, health and comfort. The principles of excellence can be provided with moderate energy consumption. But the success of excellent indoor environments will increase the demand for improvement globally and the required energy supply will provide a challenge for the world......Although air-conditioning has played a positive role for economic development in warm climates, its image is globally mixed. Field studies demonstrate that there are substantial numbers of dissatisfied people in many buildings, among them those suffering from Sick Building Syndrome (SBS) symptoms...

  2. Hybridization of General Cargo Ships to meet the Required Energy Efficiency Design Index

    OpenAIRE

    Øverleir, Magnus Anders

    2015-01-01

    In this thesis a hybrid propulsion system is proposed for a general cargo ship with the aim to meet the required Energy Efficiency Design Index (EEDI). The study has investigated how a hybrid propulsion system will influence the ship s EEDI value and fuel economy. The central problem is the coming challenge for the general cargo segment meeting the required efficiency value. Especially small vessels (3 000-15 000 DWT) with high speed will have troubles complying with the stricter regulations....

  3. Human requirements in future air-conditioned environments

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2001-01-01

    , even though existing standards and guidelines are met. A paradigm shift from rather mediocre to excellent indoor environments is foreseen in the 21st century. Based on existing information and on new research results, five principles are suggested as elements behind a new philosophy of excellence......Although air-conditioning has played a positive role for economic development in warm climates, its image is globally mixed. Field studies demonstrate that there are substantial numbers of dissatisfied people in many buildings, among them those suffering from Sick Building Syndrome (SBS) symptoms...... individual; individual control of the thermal environment should be provided. These principles of excellence are compatible with energy efficiency and sustainability....

  4. The Human Genome Initiative of the Department of Energy

    Science.gov (United States)

    1988-01-01

    The structural characterization of genes and elucidation of their encoded functions have become a cornerstone of modern health research, biology and biotechnology. A genome program is an organized effort to locate and identify the functions of all the genes of an organism. Beginning with the DOE-sponsored, 1986 human genome workshop at Santa Fe, the value of broadly organized efforts supporting total genome characterization became a subject of intensive study. There is now national recognition that benefits will rapidly accrue from an effective scientific infrastructure for total genome research. In the US genome research is now receiving dedicated funds. Several other nations are implementing genome programs. Supportive infrastructure is being improved through both national and international cooperation. The Human Genome Initiative of the Department of Energy (DOE) is a focused program of Resource and Technology Development, with objectives of speeding and bringing economies to the national human genome effort. This report relates the origins and progress of the Initiative.

  5. The Human Genome Initiative of the Department of Energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    1988-01-01

    The structural characterization of genes and elucidation of their encoded functions have become a cornerstone of modern health research, biology and biotechnology. A genome program is an organized effort to locate and identify the functions of all the genes of an organism. Beginning with the DOE-sponsored, 1986 human genome workshop at Santa Fe, the value of broadly organized efforts supporting total genome characterization became a subject of intensive study. There is now national recognition that benefits will rapidly accrue from an effective scientific infrastructure for total genome research. In the US genome research is now receiving dedicated funds. Several other nations are implementing genome programs. Supportive infrastructure is being improved through both national and international cooperation. The Human Genome Initiative of the Department of Energy (DOE) is a focused program of Resource and Technology Development, with objectives of speeding and bringing economies to the national human genome effort. This report relates the origins and progress of the Initiative. 34 refs.

  6. Renewable building energy systems and passive human comfort solutions

    Energy Technology Data Exchange (ETDEWEB)

    Omer, Abdeen Mustafa [17 Juniper Court, Forest Road West, Nottingham NG7 4EU (United Kingdom)

    2008-08-15

    With environmental protection posing as the number one global problem, man has no choice but to reduce his energy consumption. One way to accomplish this is to resort to passive and low-energy systems to maintain thermal comfort in buildings. The conventional and modern designs of wind towers can successfully be used in hot arid regions to maintain thermal comfort (with or without the use of ceiling fans) during all hours of the cooling season, or a fraction of it. Climatic design is one of the best approaches to reduce the energy cost in buildings. Proper design is the first step of defence against the stress of the climate. Buildings should be designed according to the climate of the site, reducing the need for mechanical heating or cooling. Hence maximum natural energy can be used for creating a pleasant environment inside the built envelope. Technology and industry progress in the last decade diffused electronic and informatics' devices in many human activities, and also in building construction. The utilisation and operating opportunities components, increase the reduction of heat losses by varying the thermal insulation, optimise the lighting distribution with louver screens and operate mechanical ventilation for coolness in indoor spaces. In addition to these parameters the intelligent envelope can act for security control and became an important part of the building domotic revolution. Application of simple passive cooling measure is effective in reducing the cooling load of buildings in hot and humid climates. Fourty-three percent reductions can be achieved using a combination of well-established technologies such as glazing, shading, insulation, and natural ventilation. More advanced passive cooling techniques such as roof pond, dynamic insulation, and evaporative water jacket need to be considered more closely. The building sector is a major consumer of both energy and materials worldwide, and that consumption is increasing. Most industrialised

  7. Colloquy and workshops: regional implications of the engineering manpower requirements of the National Energy Program

    Energy Technology Data Exchange (ETDEWEB)

    Segool, H. D. [ed.

    1979-05-01

    The crucial interrelationships of engineering manpower, technological innovation, productivity and capital re-formaton were keynoted. Near-term, a study has indicated a much larger New England energy demand-reduction/economic/market potential, with a probably larger engineering manpower requirement, for energy-conservation measures characterized by technological innovation and cost-effective capital services than for alternative energy-supply measures. Federal, regional, and state energy program responsibilities described a wide-ranging panorama of activities among many possible energy options which conveyed much endeavor without identifiable engineering manpower demand coefficients. Similarly, engineering manpower assessment data was described as uneven and unfocused to the energy program at the national level, disaggregated data as non-existent at the regional/state levels, although some qualitative inferences were drawn. A separate abstract was prepared for each of the 16 individual presentations for the DOE Energy Data Base (EDB); 14 of these were selected for Energy Abstracts for Policy Analysis (EAPA) and 2 for Energy Research Abstracts (ERA).

  8. Effect of fatty acids on human bone marrow mesenchymal stem cell energy metabolism and survival.

    Science.gov (United States)

    Fillmore, Natasha; Huqi, Alda; Jaswal, Jagdip S; Mori, Jun; Paulin, Roxane; Haromy, Alois; Onay-Besikci, Arzu; Ionescu, Lavinia; Thébaud, Bernard; Michelakis, Evangelos; Lopaschuk, Gary D

    2015-01-01

    Successful stem cell therapy requires the optimal proliferation, engraftment, and differentiation of stem cells into the desired cell lineage of tissues. However, stem cell therapy clinical trials to date have had limited success, suggesting that a better understanding of stem cell biology is needed. This includes a better understanding of stem cell energy metabolism because of the importance of energy metabolism in stem cell proliferation and differentiation. We report here the first direct evidence that human bone marrow mesenchymal stem cell (BMMSC) energy metabolism is highly glycolytic with low rates of mitochondrial oxidative metabolism. The contribution of glycolysis to ATP production is greater than 97% in undifferentiated BMMSCs, while glucose and fatty acid oxidation combined only contribute 3% of ATP production. We also assessed the effect of physiological levels of fatty acids on human BMMSC survival and energy metabolism. We found that the saturated fatty acid palmitate induces BMMSC apoptosis and decreases proliferation, an effect prevented by the unsaturated fatty acid oleate. Interestingly, chronic exposure of human BMMSCs to physiological levels of palmitate (for 24 hr) reduces palmitate oxidation rates. This decrease in palmitate oxidation is prevented by chronic exposure of the BMMSCs to oleate. These results suggest that reducing saturated fatty acid oxidation can decrease human BMMSC proliferation and cause cell death. These results also suggest that saturated fatty acids may be involved in the long-term impairment of BMMSC survival in vivo.

  9. Reducing the energy cost of human walking using an unpowered exoskeleton.

    Science.gov (United States)

    Collins, Steven H; Wiggin, M Bruce; Sawicki, Gregory S

    2015-06-11

    With efficiencies derived from evolution, growth and learning, humans are very well-tuned for locomotion. Metabolic energy used during walking can be partly replaced by power input from an exoskeleton, but is it possible to reduce metabolic rate without providing an additional energy source? This would require an improvement in the efficiency of the human-machine system as a whole, and would be remarkable given the apparent optimality of human gait. Here we show that the metabolic rate of human walking can be reduced by an unpowered ankle exoskeleton. We built a lightweight elastic device that acts in parallel with the user's calf muscles, off-loading muscle force and thereby reducing the metabolic energy consumed in contractions. The device uses a mechanical clutch to hold a spring as it is stretched and relaxed by ankle movements when the foot is on the ground, helping to fulfil one function of the calf muscles and Achilles tendon. Unlike muscles, however, the clutch sustains force passively. The exoskeleton consumes no chemical or electrical energy and delivers no net positive mechanical work, yet reduces the metabolic cost of walking by 7.2 ± 2.6% for healthy human users under natural conditions, comparable to savings with powered devices. Improving upon walking economy in this way is analogous to altering the structure of the body such that it is more energy-effective at walking. While strong natural pressures have already shaped human locomotion, improvements in efficiency are still possible. Much remains to be learned about this seemingly simple behaviour.

  10. Human requirements in future air-conditioned environments

    DEFF Research Database (Denmark)

    Fanger, Povl Ole

    2002-01-01

    though existing standards and guidelines are met. A paradigm shift from rather mediocre to excellent indoor environments is foreseen in buildings in the 21st century. Based on existing information and on new research results, five principles are suggested as elements behind a new philosophy of excellence......Air-conditioning of buildings has played a very positive role for economic development in warm climates. Still its image is globally mixed. Field studies demonstrate that there are substantial numbers of dissatisfied people in many buildings, among them those suffering from SBS symptoms, even...... to the breathing zone of each individual; individual control of the airflow and/or the thermal environment should be provided. These principles of excellence should be combined with energy efficiency and sustainability of future buildings....

  11. 21 CFR 610.46 - Human immunodeficiency virus (HIV) “lookback” requirements.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Human immunodeficiency virus (HIV) âlookbackâ... Disease Agents § 610.46 Human immunodeficiency virus (HIV) “lookback” requirements. (a) If you are an... calendar days after a donor tests reactive for evidence of human immunodeficiency virus (HIV)...

  12. Using a Functional Architecture to Identify Human-Automation Trust Needs and Design Requirements

    Science.gov (United States)

    2016-12-01

    Intelligence , Surveillance, and Reconnaissance (ISR) mission without a continuous communication link to human operators for trust needs. The factors that affect...performance link to human knowledge, perception and beliefs. From the analysis , automation design requirements that link to the identified trust...performing an Intelligence , Surveillance, and Reconnaissance (ISR) mission without a continuous communication link to human operators for trust needs

  13. Energy requirements for wet solvent extraction of lipids from microalgal biomass.

    Science.gov (United States)

    Martin, Gregory J O

    2016-04-01

    Biofuel production from microalgae requires energy efficient processes for extracting and converting triacylglyceride lipids to fuel, compatible with coproduction of protein feeds and nutraceuticals. Wet solvent extraction involves mechanical cell rupture, lipid extraction via solvent contacting, physical phase separation, thermal solvent recovery, and transesterification. A detailed analysis of the effect of key process parameters on the parasitic energy demand of this process was performed. On a well-to-pump basis, between 16% and 320% of the resultant biodiesel energy was consumed depending solely on the process parameters. Highly positive energy balances can be achieved, but only if a correctly designed process is used. This requires processing concentrated biomass (ca 25%w/w) with a high triacylglyceride content (ca 30%w/w), and an efficient extraction process employing a non-polar solvent, low solvent-to-paste ratio, and efficient energy recovery. These requirements preclude many laboratory scale processes and polar co-solvents as viable options for large-scale biofuel production. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Why a true account of human development requires exemplar research.

    Science.gov (United States)

    Damon, William; Colby, Anne

    2013-01-01

    This chapter uses moral psychology to illustrate why exemplar methods are essential for building a valid, complete understanding of key domains of human development. Social psychological, economic, and biological-evolutionary paradigms for studying morality rely on samples drawn from the general population. This research reveals a bleak picture of morality, highlighting its irrational, self-interested, externally controlled aspects. If the subjects in these studies are confused, pliable, or profit-maximizing, these studies conclude that people in general are morally irrational and self-interested. In contrast, studies that investigate morally exceptional individuals reveal a more thoughtful, ideal-driven, self-reflective, creative version of moral functioning. Any account that neglects this high-functioning segment of the range is seriously misleading and cannot provide the basis for aspiration or education. © Wiley Periodicals, Inc.

  15. Determination of energy and protein requirements for crossbred Holstein × Gyr preweaned dairy calves

    NARCIS (Netherlands)

    Silva, A.L.; Marcondes, M.I.; Detmann, E.; Campos, M.M.; Machado, F.S.; Filho, S.C.V.; Castro, M.M.D.; Dijkstra, J.

    2017-01-01

    The objective was to quantify the energy and protein nutritional requirements of Holstein × Gyr crossbred preweaned dairy calves until 64 d of age. Thirty-nine Holstein × Gyr crossbred male calves with an average initial live weight (mean ± SEM; for all next values) of 36 ± 1.0 kg were used. Five

  16. Training Community College faculty in the techniques and skills required for Solar Energy System installation

    Energy Technology Data Exchange (ETDEWEB)

    Leo, R.J.

    1980-05-01

    A project to train a specified number of community college, vocational/technical faculty in the techniques and skills required to install solar energy systems is described. The planning that led to the contract, the development and conduct of the training workshops, and the outcomes are detailed. An overall evaluation of the project and recommendations for the future are included. (MHR)

  17. Utilization of respiratory energy in higher plants : requirements for 'maintenance' and transport processes

    NARCIS (Netherlands)

    Bouma, T.J.

    1995-01-01

    Quantitative knowledge of both photosynthesis and respiration is required to understand plant growth and resulting crop yield. However, especially the nature of the energy demanding processes that are dependent on dark respiration in full-grown tissues is largely unknown. The main objective

  18. Determination of energy and protein requirements for crossbred Holstein × Gyr preweaned dairy calves

    NARCIS (Netherlands)

    Silva, A.L.; Marcondes, M.I.; Detmann, E.; Campos, M.M.; Machado, F.S.; Filho, S.C.V.; Castro, M.M.D.; Dijkstra, J.

    2017-01-01

    The objective was to quantify the energy and protein nutritional requirements of Holstein × Gyr crossbred preweaned dairy calves until 64 d of age. Thirty-nine Holstein × Gyr crossbred male calves with an average initial live weight (mean ± SEM; for all next values) of 36 ± 1.0 kg were used. Five

  19. Assessment of energy requirements in proven and new copper processes. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Pitt, C.H.; Wadsworth, M.E.

    1980-12-31

    Energy requirements are presented for thirteen pyrometallurgical and eight hydrometallurgical processes for the production of copper. Front end processing, mining, mineral processing, gas cleaning, and acid plant as well as mass balances are included. Conventional reverberatory smelting is used as a basis for comparison. Recommendations for needed process research in copper production are presented.

  20. Utilization of respiratory energy in higher plants. Requirements for 'maintenance' and transport processes.

    NARCIS (Netherlands)

    Bouma, T.J.

    1995-01-01

    Quantitative knowledge of both photosynthesis and respiration is required to understand plant growth and resulting crop yield. However, especially the nature of the energy demanding processes that are dependent on dark respiration in full-grown tissues is largely unknown. The main objective of the p

  1. Determination of energy and protein requirements for crossbred Holstein × Gyr preweaned dairy calves.

    Science.gov (United States)

    Silva, A L; Marcondes, M I; Detmann, E; Campos, M M; Machado, F S; Filho, S C Valadares; Castro, M M D; Dijkstra, J

    2017-02-01

    The objective was to quantify the energy and protein nutritional requirements of Holstein × Gyr crossbred preweaned dairy calves until 64 d of age. Thirty-nine Holstein × Gyr crossbred male calves with an average initial live weight (mean ± SEM; for all next values) of 36 ± 1.0 kg were used. Five calves were slaughtered at 4 d of life to estimate the animals' initial body composition (reference group). The remaining 34 calves were distributed in a completely randomized design in a 3 × 2 factorial arrangement consisting of 3 levels of milk (2, 4, or 8 L/d) and 2 levels of starter feed (presence or absence in diet). At 15 and 45 d of life, 4 animals from each treatment were subjected to digestibility trials with total collection of feces (for 72 h) and urine (for 24 h). At 64 d of age, all animals were slaughtered, their gastro-intestinal tract was washed to determine the empty body weight (EBW; kg), and their body tissues were sampled for subsequent analyses. The net energy requirement for maintenance was estimated using an exponential regression between metabolizable energy intake and heat production (both in Mcal/EBW(0.75) per d) and was 74.3 ± 5.7 kcal/EBW(0.75) per d, and was not affected by inclusion of starter feed in the diet. The metabolizable energy requirement for maintenance was determined at the point of zero energy retention in the body and was 105.2 ± 5.8 kcal/EBW(0.75) per d. The net energy for gain was estimated using the EBW and the empty body gain (EBG; kg/d) as 0.0882 ± 0.0028 × EBW(0.75) × EBG(0.9050±0.0706). The metabolizable energy efficiency for gain (kg) of the milk was 57.4 ± 3.45%, and the kg of the starter feed was 39.3 ± 2.09%. The metabolizable protein requirement for maintenance was 3.52 ± 0.34 g/BW(0.75) per d. The net protein required for each kilogram gained was estimated as 119.1 ± 32.9 × EBW(0.0663±0.059). The metabolizable protein efficiency for gain was 77 ± 8.5% and was not affected by inclusion of starter feed

  2. The energy requirements of Eurasian perch (Perca fluviatilis L.) in intensive culture

    DEFF Research Database (Denmark)

    Strand, A.; Overton, Julia Lynne; Alanara, A.

    2011-01-01

    Fish feed constitutes one of the largest costs in aquaculture, therefore inefficient feed management will have a negative impact on fish farm economics. Eurasian perch (Perca fluviatilis L.) is a relatively new candidate for freshwater aquaculture, however little is known about the energy...... requirements of this species. The aim of this study was to develop an energy requirement model for intensive culture of Eurasian perch reared at rational temperatures. Data on growth (the thermal unit growth coefficient, TGC, 3√g ‧ (℃ ‧ days)-1) and digestible energy need (DEN, kJ DE ‧ g -1) of Eurasian perch...... at a size range of 20–180 g and at temperatures of 17–23 ℃ were used. Regression analysis revealed that both TGC and DEN were affected significantly by fish size (P 0.05). Two models including body size of the fish were developed: (i) an inverse TGC model for evaluation...

  3. A 2nd generation static model of greenhouse energy requirements (horticern) : a comparison with dynamic models

    CERN Document Server

    Jolliet, O; Munday, G L

    1989-01-01

    Optimisation of a greenhouse and its components requires a suitable model permitting precise determination of its energy requirements. Existing static models are simple but lack precision; dynamic models though more precise, are unsuitable for use over long periods and difficult to handle in practice. A theoretical study and measurements from the CERN trial greenhouse have allowed the development of new static model named "HORTICERN", precise and easy to use for predicting energy consumption and which takes into account effects of solar energy, wind and radiative loss to the sky. This paper compares the HORTICERN model with the dynamic models of Bot, Takakura, Van Bavel and Gembloux, and demonstrates that its precision is comparable; differences on average being less than 5%, it is independent of type of greenhouse (e.g. single or double glazing, Hortiplus, etc.) and climate. The HORTICERN method has been developed for PC use and is proving to be a powerful tool for greenhouse optimisation by research work...

  4. Comparison of Land, Water, and Energy Requirements of Lettuce Grown Using Hydroponic vs. Conventional Agricultural Methods

    Directory of Open Access Journals (Sweden)

    Guilherme Lages Barbosa

    2015-06-01

    Full Text Available The land, water, and energy requirements of hydroponics were compared to those of conventional agriculture by example of lettuce production in Yuma, Arizona, USA. Data were obtained from crop budgets and governmental agricultural statistics, and contrasted with theoretical data for hydroponic lettuce production derived by using engineering equations populated with literature values. Yields of lettuce per greenhouse unit (815 m2 of 41 ± 6.1 kg/m2/y had water and energy demands of 20 ± 3.8 L/kg/y and 90,000 ± 11,000 kJ/kg/y (±standard deviation, respectively. In comparison, conventional production yielded 3.9 ± 0.21 kg/m2/y of produce, with water and energy demands of 250 ± 25 L/kg/y and 1100 ± 75 kJ/kg/y, respectively. Hydroponics offered 11 ± 1.7 times higher yields but required 82 ± 11 times more energy compared to conventionally produced lettuce. To the authors’ knowledge, this is the first quantitative comparison of conventional and hydroponic produce production by example of lettuce grown in the southwestern United States. It identified energy availability as a major factor in assessing the sustainability of hydroponics, and it points to water-scarce settings offering an abundance of renewable energy (e.g., from solar, geothermal, or wind power as particularly attractive regions for hydroponic agriculture.

  5. Comparison of Land, Water, and Energy Requirements of Lettuce Grown Using Hydroponic vs. Conventional Agricultural Methods.

    Science.gov (United States)

    Barbosa, Guilherme Lages; Gadelha, Francisca Daiane Almeida; Kublik, Natalya; Proctor, Alan; Reichelm, Lucas; Weissinger, Emily; Wohlleb, Gregory M; Halden, Rolf U

    2015-06-16

    The land, water, and energy requirements of hydroponics were compared to those of conventional agriculture by example of lettuce production in Yuma, Arizona, USA. Data were obtained from crop budgets and governmental agricultural statistics, and contrasted with theoretical data for hydroponic lettuce production derived by using engineering equations populated with literature values. Yields of lettuce per greenhouse unit (815 m2) of 41 ± 6.1 kg/m2/y had water and energy demands of 20 ± 3.8 L/kg/y and 90,000 ± 11,000 kJ/kg/y (±standard deviation), respectively. In comparison, conventional production yielded 3.9 ± 0.21 kg/m2/y of produce, with water and energy demands of 250 ± 25 L/kg/y and 1100 ± 75 kJ/kg/y, respectively. Hydroponics offered 11 ± 1.7 times higher yields but required 82 ± 11 times more energy compared to conventionally produced lettuce. To the authors' knowledge, this is the first quantitative comparison of conventional and hydroponic produce production by example of lettuce grown in the southwestern United States. It identified energy availability as a major factor in assessing the sustainability of hydroponics, and it points to water-scarce settings offering an abundance of renewable energy (e.g., from solar, geothermal, or wind power) as particularly attractive regions for hydroponic agriculture.

  6. Strategic study on energy-protein requirements for local sheep: 5. Ewes during lactation phase

    Directory of Open Access Journals (Sweden)

    I-W Mathius

    2004-03-01

    Full Text Available Thirty-six Javanese thin-tail ewes in the end of late pregnancy phase were set out to study the energy and crude protein requirements during the first eight-week of lactation phase. The ewes were penned individually in doors and randomly assigned to a 3 x 3 factorial arrangement, consisting of three levels of energy (low, medium and high and three levels of crude protein (low, medium and high diets with four ewes per treatment. The diets were pelleted and offered four times daily in approximately equal amount. Feed intake, nutrient digestibility, body weight and milk production were recorded. Results showed that, total lamb birth weights was not affected, but protein content on the ration treatments significantly altered (P0.05, while crude protein content on the ration highly significantly affected (P<0.01. Based on data recorded, the energy and protein requirements for ewes during lactation phase are highly significantly depended on ewes’ live weight, milk production and the ratio of energy metabolism and crude protein of the ration. It was concluded that in order to fulfil the crude protein and energy needs of the ewes during lactation phase, the ration given should contain crude protein and energy as much as 16% (based on dry matter and 13.4 MJ/kg dry matter respectively.

  7. Aerated lagooning of agro-industrial wastewater: depuration performance and energy requirements

    Directory of Open Access Journals (Sweden)

    Serafina Andiloro

    2013-09-01

    Full Text Available Intensive depuration plants have often shown low reliability and economic sustainability, when utilised for agro-industrial wastewater treatment, due to the particular wastewater properties: high organic load and essential oil concentrations, acidity, nutrient scarcity and qualitative-quantitative variability of effluents. Aerated lagooning systems represent a suitable alternative, because they are able to assure good reliability and low energy requirements, avoiding the drawbacks shown by the intensive depuration plants. In order to optimize performance of the lagooning systems, particularly in terms of energy requirements, depuration processes of aerobic-anaerobic aerated lagoons were investigated, both at full- and laboratory-scale. Citrus processing wastewater were subject to bubble aeration with low flow rates and limited time; the removal rate of organic load was evaluated and energy requirements of different depuration schemes were compared. The experimental investigations in full-scale aerated lagoons showed a low energy supply (0.21-0.59 kWh per kg of COD (Chemical Oxygen Demand removed with an average value of 0.45 kWh kgCOD –1, an adequate equalisation capability and constantly good depurative performance also with high concentrations of essential oil (500-1000 ppm. The experimental investigations in lab-scale aerated tanks under controlled conditions indicated the possibility of decreasing energy requirements (down to 0.16 kWh kgCOD –1 by reducing aeration power (down to 0.6 W m–3 and limiting aeration time to night 12 hours only, when energy price is lower. In spite of the low aeration, the COD removal rates were on the average six-fold higher compared to the anaerobic tank. Other outcomes indicated an ability of the spontaneous microflora to adapt to high concentrations of essential oils, which however did not provide an increase of the removal rate of the organic load in the experimented scheme.

  8. Human Behavior & Low Energy Architecture: Linking Environmental Adaptation, Personal Comfort, & Energy Use in the Built Environment

    Science.gov (United States)

    Langevin, Jared

    Truly sustainable buildings serve to enrich the daily sensory experience of their human inhabitants while consuming the least amount of energy possible; yet, building occupants and their environmentally adaptive behaviors remain a poorly characterized variable in even the most "green" building design and operation approaches. This deficiency has been linked to gaps between predicted and actual energy use, as well as to eventual problems with occupant discomfort, productivity losses, and health issues. Going forward, better tools are needed for considering the human-building interaction as a key part of energy efficiency strategies that promote good Indoor Environmental Quality (IEQ) in buildings. This dissertation presents the development and implementation of a Human and Building Interaction Toolkit (HABIT), a framework for the integrated simulation of office occupants' thermally adaptive behaviors, IEQ, and building energy use as part of sustainable building design and operation. Development of HABIT begins with an effort to devise more reliable methods for predicting individual occupants' thermal comfort, considered the driving force behind the behaviors of focus for this project. A long-term field study of thermal comfort and behavior is then presented, and the data it generates are used to develop and validate an agent-based behavior simulation model. Key aspects of the agent-based behavior model are described, and its predictive abilities are shown to compare favorably to those of multiple other behavior modeling options. Finally, the agent-based behavior model is linked with whole building energy simulation in EnergyPlus, forming the full HABIT program. The program is used to evaluate the energy and IEQ impacts of several occupant behavior scenarios in the simulation of a case study office building for the Philadelphia climate. Results indicate that more efficient local heating/cooling options may be paired with wider set point ranges to yield up to 24

  9. Provision of protein and energy in relation to measured requirements in intensive care patients

    DEFF Research Database (Denmark)

    Allingstrup, Matilde Jo; Esmailzadeh, Negar; Knudsen, Anne Wilkens

    2012-01-01

    BACKGROUND & AIMS: Adequacy of nutritional support in intensive care patients is still a matter of investigation. This study aimed to relate mortality to provision, measured requirements and balances for energy and protein in ICU patients. DESIGN: Prospective observational cohort study of 113 ICU...... patients in a tertiary referral hospital. RESULTS: Death occurred earlier in the tertile of patients with the lowest provision of protein and amino acids. The results were confirmed in Cox regression analyses which showed a significantly decreased hazard ratio of death with increased protein provision......, also when adjusted for baseline prognostic variables (APACHE II, SOFA scores and age). Provision of energy, measured resting energy expenditure or energy and nitrogen balance was not related to mortality. The possible cause-effect relationship is discussed after a more detailed analysis of the initial...

  10. Sex effects on net protein and energy requirements for growth of Saanen goats.

    Science.gov (United States)

    Souza, A P; St-Pierre, N R; Fernandes, M H R M; Almeida, A K; Vargas, J A C; Resende, K T; Teixeira, I A M A

    2017-03-22

    Requirements for growth in the different sexes remain poorly quantified in goats. The objective of this study was to develop equations for estimating net protein (NPG) and net energy (NEG) for growth in Saanen goats of different sexes from 5 to 45 kg of body weight (BW). A data set from 7 comparative slaughter studies (238 individual records) of Saanen goats was used. Allometric equations were developed to determine body protein and energy contents in the empty BW (EBW) as dependent variables and EBW as the allometric predictor. Parameter estimates were obtained using a linearized (log-transformation) expression of the allometric equations using the MIXED procedure in SAS software (SAS Institute Inc., Cary, NC). The model included the random effect of the study and the fixed effects of sex (intact male, castrated male, and female; n = 94, 73, and 71, respectively), EBW, and their interactions. Net requirements for growth were estimated as the first partial derivative of the allometric equations with respect to EBW. Additionally, net requirements for growth were evaluated based on the degree of maturity. Monte Carlo techniques were used to estimate the uncertainty of the calculated net requirement values. Sex affected allometric relationships for protein and energy in Saanen goats. The allometric equation for protein content in the EBW of intact and castrated males was log10 protein (g) = 2.221 (±0.0224) + 1.015 (±0.0165) × log10 EBW (kg). For females, the relationship was log10 protein (g) = 2.277 (±0.0288) + 0.958 (±0.0218) × log10 EBW (kg). Therefore, NPG for males was greater than for females. The allometric equation for the energy content in the EBW of intact males was log10 energy (kcal) = 2.988 (±0.0323) + 1.240 (±0.0238) × log10 EBW (kg); of castrated males, log10 energy (kcal) = 2.873 (±0.0377) + 1.359 (±0.0283) × log10 EBW (kg); and of females, log10 energy (kcal) = 2.820 (±0.0377) + 1.442 (±0.0281) × log10 EBW (kg). The NEG of castrated

  11. NASA Space Safety Standards and Procedures for Human Rating Requirements

    Science.gov (United States)

    Shivers, C. Herbert

    2009-01-01

    The National Aeronautics and Space Administration of the United States of America (NASA) has arguably led this planet in space exploration and certainly has been one of two major leaders in those endeavors. NASA governance is institutionalized and managed in a series documents arranged in a hierarchy and flowing down to the work levels. A document tree of NASA s documentation in its totality would likely overwhelm and not be very informative. Taken in segments related to the various business topics and focusing in those segments, however, provides a logical and understandable relationship and flow of requirements and processes. That is the nature of this chapter, a selection of NASA documentation pertaining to space exploration and a description of how those documents together form the plan by which NASA business for space exploration is conducted. Information presented herein is taken from NASA publications and is available publicly and no information herein is protected by copyright or security regulations. While NASA documents are the source of information presented herein, any and all views expressed herein and any misrepresentations of NASA data that may occur herein are those of the author and should not be considered NASA official positions or statements, nor should NASA endorsement of anything presented in this work be assumed.

  12. The Contribution of Environmental Siting and Permitting Requirements to the Cost of Energy for Oscillating Water Column Wave Energy Devices

    Energy Technology Data Exchange (ETDEWEB)

    Copping, Andrea E.; Geerlofs, Simon H.; Hanna, Luke A.

    2013-09-30

    Responsible deployment of marine and hydrokinetic (MHK) devices in estuaries, coastal areas, and major rivers requires that biological resources and ecosystems be protected through siting and permitting (consenting) processes. Scoping appropriate deployment locations, collecting pre-installation (baseline) and post-installation data all add to the cost of developing MHK projects, and hence to the cost of energy. Under the direction of the U.S. Department of Energy, Pacific Northwest National Laboratory scientists have developed logic models that describe studies and processes for environmental siting and permitting. Each study and environmental permitting process has been assigned a cost derived from existing and proposed tidal, wave, and riverine MHK projects, as well as expert opinion of marine environmental research professionals. Cost estimates have been developed at the pilot and commercial scale. The reference model described in this document is an oscillating water column device deployed in Northern California at approximately 50 meters water depth.

  13. The Contribution of Environmental Siting and Permitting Requirements to the Cost of Energy for Oscillating Water Column Wave Energy Devices

    Energy Technology Data Exchange (ETDEWEB)

    Copping, Andrea E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Geerlofs, Simon H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hanna, Luke A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-09-01

    Responsible deployment of marine and hydrokinetic (MHK) devices in estuaries, coastal areas, and major rivers requires that biological resources and ecosystems be protected through siting and permitting (consenting) processes. Scoping appropriate deployment locations, collecting pre-installation (baseline) and post-installation data all add to the cost of developing MHK projects, and hence to the cost of energy. Under the direction of the U.S. Department of Energy, Pacific Northwest National Laboratory scientists have developed logic models that describe studies and processes for environmental siting and permitting. Each study and environmental permitting process has been assigned a cost derived from existing and proposed tidal, wave, and riverine MHK projects, as well as expert opinion of marine environmental research professionals. Cost estimates have been developed at the pilot and commercial scale. The reference model described in this document is an oscillating water column device deployed in Northern California at approximately 50 meters water depth.

  14. Modeling of human movement monitoring using Bluetooth Low Energy technology.

    Science.gov (United States)

    Mokhtari, G; Zhang, Q; Karunanithi, M

    2015-01-01

    Bluetooth Low Energy (BLE) is a wireless communication technology which can be used to monitor human movements. In this monitoring system, a BLE signal scanner scans signal strength of BLE tags carried by people, to thus infer human movement patterns within its monitoring zone. However to the extent of our knowledge one main aspect of this monitoring system which has not yet been thoroughly investigated in literature is how to build a sound theoretical model, based on tunable BLE communication parameters such as scanning time interval and advertising time interval, to enable the study and design of effective and efficient movement monitoring systems. In this paper, we proposed and developed a statistical model based on Monte-Carlo simulation, which can be utilized to assess impacts of BLE technology parameters in terms of latency and efficiency, on a movement monitoring system, and can thus benefit a more efficient system design.

  15. Texas State Building Energy Code: Analysis of Potential Benefits and Costs of Commercial Lighting Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Richman, Eric E.; Belzer, David B.; Winiarski, David W.

    2005-09-15

    The State Energy Conservation Office of Texas has asked the U.S. Department of Energy to analyze the potential energy effect and cost-effectiveness of the lighting requirements in the 2003 IECC as they consider adoption of this energy code. The new provisions of interest in the lighting section of IECC 2003 include new lighting power densities (LPD) and requirements for automatic lighting shutoff controls. The potential effect of the new LPD values is analyzed as a comparison with previous values in the nationally available IECC codes and ASHRAE/IESNA 90.1. The basis for the analysis is a set of lighting models developed as part of the ASHRAE/IES code process, which is the basis for IECC 2003 LPD values. The use of the models allows for an effective comparison of values for various building types of interest to Texas state. Potential effects from control requirements are discussed, and available case study analysis results are provided but no comprehensive numerical evaluation is provided in this limited analysis effort.

  16. Postures and Motions Library Development for Verification of Ground Crew Human Systems Integration Requirements

    Science.gov (United States)

    Jackson, Mariea Dunn; Dischinger, Charles; Stambolian, Damon; Henderson, Gena

    2012-01-01

    Spacecraft and launch vehicle ground processing activities require a variety of unique human activities. These activities are being documented in a Primitive motion capture library. The Library will be used by the human factors engineering in the future to infuse real to life human activities into the CAD models to verify ground systems human factors requirements. As the Primitive models are being developed for the library the project has selected several current human factors issues to be addressed for the SLS and Orion launch systems. This paper explains how the Motion Capture of unique ground systems activities are being used to verify the human factors analysis requirements for ground system used to process the STS and Orion vehicles, and how the primitive models will be applied to future spacecraft and launch vehicle processing.

  17. Postures and Motions Library Development for Verification of Ground Crew Human Factors Requirements

    Science.gov (United States)

    Stambolian, Damon; Henderson, Gena; Jackson, Mariea Dunn; Dischinger, Charles

    2013-01-01

    Spacecraft and launch vehicle ground processing activities require a variety of unique human activities. These activities are being documented in a primitive motion capture library. The library will be used by human factors engineering analysts to infuse real to life human activities into the CAD models to verify ground systems human factors requirements. As the primitive models are being developed for the library, the project has selected several current human factors issues to be addressed for the Space Launch System (SLS) and Orion launch systems. This paper explains how the motion capture of unique ground systems activities is being used to verify the human factors engineering requirements for ground systems used to process the SLS and Orion vehicles, and how the primitive models will be applied to future spacecraft and launch vehicle processing.

  18. The human component of sustainability: a study for assessing "human performances" of energy efficient construction blocks.

    Science.gov (United States)

    Attaianese, Erminia; Duca, Gabriella

    2012-01-01

    This paper presents an applied research aimed at understanding the relevance and the applicability of human related criteria in sustainability assessment of construction materials. Under a theoretical perspective, human factors consideration is strongly encouraged by building sustainability assessment methods, but the practice demonstrates that current models for building sustainability assessment neglect ergonomic issues, especially those ones concerning the construction phase. The study starts from the observation that new construction techniques for high energy efficient external walls are characterized by elements generally heavier and bigger than traditional materials. In this case, high sustainability performances connected with energy saving could be reached only consuming high, and then not very much sustainable, human efforts during setting-up operations. The paper illustrates a practical approach for encompassing human factors in sustainability assessment of four block types for energy efficient external walls. Research steps, from block selections to bricklaying task analysis, human factors indicators and metrics formulation, data gathering and final assessment are going to be presented. Finally, open issues and further possible generalizations from the particular case study will be discussed.

  19. Modeling of Human Arm Energy Expenditure for Predicting Energy Optimal Trajectories

    Directory of Open Access Journals (Sweden)

    L. Zhou

    2011-07-01

    Full Text Available Human arm motion can inspire the trajectory planning of anthropomorphic robotic arms to achieve energy-efficient movements. An approach for predicting metabolic cost in the planar human arm motion by means of the biomechanical simulation is proposed in this work. Two biomechanical models, including an analytical model and a musculoskeletal model, are developed to implement the proposed approach. The analytical model is developed by modifying a human muscle expenditure model, in which the muscles are grouped as torque providers for computation efficiency. In the musculoskeletal model, the predication of metabolic cost is conducted on the basis of individual muscles. With the proposed approach, metabolic costs for parameterized target-reaching arm motions are calculated and utilized to identify optimal arm trajectories.

  20. Biological characterization of low-energy ions with high-energy deposition on human cells.

    Science.gov (United States)

    Saha, Janapriya; Wilson, Paul; Thieberger, Peter; Lowenstein, Derek; Wang, Minli; Cucinotta, Francis A

    2014-09-01

    During space travel, astronauts are exposed to cosmic radiation that is comprised of high-energy nuclear particles. Cancer patients are also exposed to high-energy nuclear particles when treated with proton and carbon beams. Nuclear interactions from high-energy particles traversing shielding materials and tissue produce low-energy (energy (HZE) particles and low-energy secondary ions of similar LET will have distinct biological effects for cellular and tissue damage endpoints. We investigated the biological effects of low-energy ions of high LET utilizing the Tandem Van de Graaff accelerator at the Brookhaven National Laboratory (BNL), and compared these to experiments with HZE particles, that mimic the space environment produced at NASA Space Radiation Laboratory (NSRL) at BNL. Immunostaining for DNA damage response proteins was carried out after irradiation with 5.6 MeV/n boron (LET 205 keV/μm), 5.3 MeV/n silicon (LET 1241 keV/μm), 600 MeV/n Fe (LET 180 keV/μm) and 77 MeV/n oxygen (LET 58 keV/μm) particles. Low-energy ions caused more persistent DNA damage response (DDR) protein foci in irradiated human fibroblasts and esophageal epithelial cells compared to HZE particles. More detailed studies comparing boron ions to Fe particles, showed that boron-ion radiation resulted in a stronger G2 delay compared to Fe-particle exposure, and boron ions also showed an early recruitment of Rad51 at double-strand break (DSB) sites, which suggests a preference of homologous recombination for DSB repair in low-energy albeit high-LET particles. Our experiments suggest that the very high-energy radiation deposition by low-energy ions, representative of galactic cosmic radiation and solar particle event secondary radiation, generates massive but localized DNA damage leading to delayed DSB repair, and distinct cellular responses from HZE particles. Thus, low-energy heavy ions provide a valuable probe for studies of homologous recombination repair in radiation responses.

  1. Large Scale Computing and Storage Requirements for Fusion Energy Sciences: Target 2017

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, Richard

    2014-05-02

    The National Energy Research Scientific Computing Center (NERSC) is the primary computing center for the DOE Office of Science, serving approximately 4,500 users working on some 650 projects that involve nearly 600 codes in a wide variety of scientific disciplines. In March 2013, NERSC, DOE?s Office of Advanced Scientific Computing Research (ASCR) and DOE?s Office of Fusion Energy Sciences (FES) held a review to characterize High Performance Computing (HPC) and storage requirements for FES research through 2017. This report is the result.

  2. Comparison of Land, Water, and Energy Requirements of Lettuce Grown Using Hydroponic vs. Conventional Agricultural Methods

    OpenAIRE

    Guilherme Lages Barbosa; Francisca Daiane Almeida Gadelha; Natalya Kublik; Alan Proctor; Lucas Reichelm; Emily Weissinger; Gregory M. Wohlleb; Halden, Rolf U.

    2015-01-01

    The land, water, and energy requirements of hydroponics were compared to those of conventional agriculture by example of lettuce production in Yuma, Arizona, USA. Data were obtained from crop budgets and governmental agricultural statistics, and contrasted with theoretical data for hydroponic lettuce production derived by using engineering equations populated with literature values. Yields of lettuce per greenhouse unit (815 m2) of 41 ± 6.1 kg/m2/y had water and energy demands of 20 ± 3.8 L/...

  3. 78 FR 27982 - U.S. Flag Compliance With MARPOL Annex VI International Energy Efficiency (IEE) Requirements

    Science.gov (United States)

    2013-05-13

    ... SECURITY Coast Guard U.S. Flag Compliance With MARPOL Annex VI International Energy Efficiency (IEE... issuance of an International Energy Efficiency Certificate and the preparation of a Ship Energy Efficiency... Energy Efficiency Design Index. These requirements apply to all U.S. flag ships 400 gross tonnage...

  4. Biomechanical energy harvesting from human motion: theory, state of the art, design guidelines, and future directions

    Directory of Open Access Journals (Sweden)

    Shapiro Amir

    2011-04-01

    Full Text Available Abstract Background Biomechanical energy harvesting from human motion presents a promising clean alternative to electrical power supplied by batteries for portable electronic devices and for computerized and motorized prosthetics. We present the theory of energy harvesting from the human body and describe the amount of energy that can be harvested from body heat and from motions of various parts of the body during walking, such as heel strike; ankle, knee, hip, shoulder, and elbow joint motion; and center of mass vertical motion. Methods We evaluated major motions performed during walking and identified the amount of work the body expends and the portion of recoverable energy. During walking, there are phases of the motion at the joints where muscles act as brakes and energy is lost to the surroundings. During those phases of motion, the required braking force or torque can be replaced by an electrical generator, allowing energy to be harvested at the cost of only minimal additional effort. The amount of energy that can be harvested was estimated experimentally and from literature data. Recommendations for future directions are made on the basis of our results in combination with a review of state-of-the-art biomechanical energy harvesting devices and energy conversion methods. Results For a device that uses center of mass motion, the maximum amount of energy that can be harvested is approximately 1 W per kilogram of device weight. For a person weighing 80 kg and walking at approximately 4 km/h, the power generation from the heel strike is approximately 2 W. For a joint-mounted device based on generative braking, the joints generating the most power are the knees (34 W and the ankles (20 W. Conclusions Our theoretical calculations align well with current device performance data. Our results suggest that the most energy can be harvested from the lower limb joints, but to do so efficiently, an innovative and light-weight mechanical design is

  5. Effects of maternal energy efficiency on broiler chicken growth, feed conversion, residual feed intake, and residual maintenance metabolizable energy requirements.

    Science.gov (United States)

    Romero, L F; Zuidhof, M J; Renema, R A; Naeima, A; Robinson, F E

    2011-12-01

    This study investigated the effect of maternal energy efficiency on broiler chicken growth and energy efficiency from 7 to 40 d of age. Residual feed intake (RFI) and residual maintenance ME requirement (RME) were used to measure energetic efficiency. Residual feed intake was defined as the difference between observed and predicted ME intake, and RME(m) as the difference between observed and predicted maintenance ME requirements. A total of 144 Ross-708 broiler breeder pullets were placed in individual laying cages at 16 wk of age. Hens with the greatest RFI (n = 32) and lowest RFI (n = 32) values from 20 to 56 wk of age were selected (maternal RFI; RFI(mat)). Selected hens were retrospectively assigned to a high- or low-RME(m) category (maternal RME(m); RME(mmat)). At 59 wk, eggs were collected for 8 d and pedigree hatched. A total of 338 broilers grouped by dam and sex were raised in 128 cages where feed intake, BW, and temperature were recorded from 7 to 40 d to calculate broiler feed conversion ratios, RFI, and RME(m). The design was a 2 × 2 × 2 factorial with 2 levels of RFI(mat), 2 levels of RME(mmat), and 2 sexes. Neither the RFI(mat) nor RME(mmat) category affected broiler offpring BW or total conversion ratio. The high-RFI(mat) × low-RME(mmat) broilers had decreased growth to 40 d. Low-RFI(mat) × low-RME(mmat) broilers had a lower RME(m) (-5.93 kcal of ME/kg(0.60) per day) and RFI (-0.86 kcal of ME/d) than high-RFI(mat) × low-RME(mmat) broilers (RME(m) = 1.70 kcal of ME/kg(0.60) per day; RFI = 0.38 kcal of ME/d). Overall, hens with low maintenance requirements (low RME(m)) produced more efficient broilers when other efficiency related traits, represented in a lower RFI, were present. Exclusion of high-RFI × low-RME(m) hens from selection programs may improve energy efficiency at the broiler level. The RME(m) methodology is a viable alternative to evaluate energy efficiency in broilers because it avoids confounding environmental effects and allows

  6. Energy-Efficient Real-Time Human Activity Recognition on Smart Mobile Devices

    Directory of Open Access Journals (Sweden)

    Jin Lee

    2016-01-01

    Full Text Available Nowadays, human activity recognition (HAR plays an important role in wellness-care and context-aware systems. Human activities can be recognized in real-time by using sensory data collected from various sensors built in smart mobile devices. Recent studies have focused on HAR that is solely based on triaxial accelerometers, which is the most energy-efficient approach. However, such HAR approaches are still energy-inefficient because the accelerometer is required to run without stopping so that the physical activity of a user can be recognized in real-time. In this paper, we propose a novel approach for HAR process that controls the activity recognition duration for energy-efficient HAR. We investigated the impact of varying the acceleration-sampling frequency and window size for HAR by using the variable activity recognition duration (VARD strategy. We implemented our approach by using an Android platform and evaluated its performance in terms of energy efficiency and accuracy. The experimental results showed that our approach reduced energy consumption by a minimum of about 44.23% and maximum of about 78.85% compared to conventional HAR without sacrificing accuracy.

  7. Digital nuclear radiation spectroscopy: Hardware requirements to minimize energy resolution degradation

    Energy Technology Data Exchange (ETDEWEB)

    Riva, M., E-mail: Marco.Riva@enea.it; Esposito, B.; Marocco, D.; Belli, F.

    2015-10-15

    Highlights: • Systematic requirement analysis of the digitizing process. • Synthetic pulses with different Full Width Half Maximum (FWHM). • Statistical and systematic error study. • Effects of the pulse amplitude reduction respect to the full scale on the error. • Hardware architecture considerations. - Abstract: Nuclear radiation spectroscopy is now often relying on digital acquisition techniques. The present paper addresses the problem of analyzing the requirements of the digitizer in terms of sampling frequency and number of bits to minimize the energy resolution degradation caused by the digitizing process. The analysis is performed using synthetic pulses (with different amplitude and Full Width Half Maximum) of typical nuclear spectroscopy detectors and the pulse area as energy estimate. Additional relevant issues, such as the hardware architecture and the data throughput speed, are also discussed.

  8. Technical support document for proposed revision of the model energy code thermal envelope requirements

    Energy Technology Data Exchange (ETDEWEB)

    Conner, C.C.; Lucas, R.G.

    1993-02-01

    This report documents the development of the proposed revision of the council of American Building Officials' (CABO) 1993 supplement to the 1992 Model Energy Code (MEC) (referred to as the 1993 MEC) building thermal envelope requirements for single-family and low-rise multifamily residences. The goal of this analysis was to develop revised guidelines based on an objective methodology that determined the most cost-effective (least total life-cycle cost [LCC]) combination of energy conservation measures (ECMs) for residences in different locations. The ECMs with the lowest LCC were used as a basis for proposing revised MEC maximum U[sub o]-value (thermal transmittance) curves in the MEC format. The changes proposed here affect the requirements for group R'' residences. The group R residences are detached one- and two-family dwellings (referred to as single-family) and all other residential buildings three stories or less (referred to as multifamily).

  9. Technical support document for proposed revision of the model energy code thermal envelope requirements

    Energy Technology Data Exchange (ETDEWEB)

    Conner, C.C.; Lucas, R.G.

    1993-02-01

    This report documents the development of the proposed revision of the council of American Building Officials` (CABO) 1993 supplement to the 1992 Model Energy Code (MEC) (referred to as the 1993 MEC) building thermal envelope requirements for single-family and low-rise multifamily residences. The goal of this analysis was to develop revised guidelines based on an objective methodology that determined the most cost-effective (least total life-cycle cost [LCC]) combination of energy conservation measures (ECMs) for residences in different locations. The ECMs with the lowest LCC were used as a basis for proposing revised MEC maximum U{sub o}-value (thermal transmittance) curves in the MEC format. The changes proposed here affect the requirements for ``group R`` residences. The group R residences are detached one- and two-family dwellings (referred to as single-family) and all other residential buildings three stories or less (referred to as multifamily).

  10. Dietary energy requirements in relatively healthy maintenance hemodialysis patients estimated from long-term metabolic studies.

    Science.gov (United States)

    Shah, Anuja; Bross, Rachelle; Shapiro, Bryan B; Morrison, Gillian; Kopple, Joel D

    2016-03-01

    Studies that examined dietary energy requirements (DERs) of patients undergoing maintenance hemodialysis (MHD) have shown mixed results. Many studies reported normal DERs, but some described increased energy needs. DERs in MHD patients have been estimated primarily from indirect calorimetry and from nitrogen balance studies. The present study measured DERs in MHD patients on the basis of their dietary energy intake and changes in body composition. This study assessed DERs in MHD patients who received a constant energy intake while changes in their body composition were measured. Seven male and 6 female sedentary, clinically stable MHD patients received a constant mean (±SD) energy intake for 92.2 ± 7.9 d while residing in a metabolic research ward. Changes in fat and fat-free mass, measured by dual-energy X-ray absorptiometry, were converted to calorie equivalents and added to energy intake to calculate energy requirements. The average DER was 31 ± 3 kcal · kg(-1) · d(-1) calculated from energy intake and change in fat and fat-free calories, which was 28 ± 197 kcal/d over the 92 d of the study. DERs of MHD patients correlated strongly with their body weight (r = 0.81, P = 0.002) and less closely with their measured resting energy expenditure expressed as kcal/d (r = 0.69, P = 0.01). Although the average observed DER in MHD patients was similar to published estimated values for normal sedentary individuals of similar age and sex, there was wide variability in DER among individual patients (range: 26-36 kcal · kg(-1) · d(-1)). Average DERs of sedentary, clinically stable patients receiving MHD are similar to those of sedentary normal individuals. Our data do not support the theory that MHD patients have increased DERs. Due to the high variability in DERs, careful monitoring of the nutritional status of individual MHD patients is essential. This trial was registered at clinicaltrials.gov as NCT02194114. © 2016 American Society for Nutrition.

  11. Energy Requirements for Maintenance and Growth of German Mutton Merino Crossbred Lambs

    Institute of Scientific and Technical Information of China (English)

    DENG Kai-dong; DIAO Qi-yu; JIANG Cheng-gang; TU Yan; ZHANG Nai-feng; LIU Jie; MA Tao; ZHAO Yi-guang; XU Gui-shan

    2013-01-01

    A comparative slaughter trial and a metabolism trial were conducted to determine the requirement of net energy (NE) and metabolizable energy (ME) by the crossbreed of German Mutton Merino×Inner Mongolia Merino for fattening from 35 to 50 kg of body weight (BW). 49 crossbred female lambs ((33.9±2.3) (SD) kg BW) of German Mutton Merino×Inner Mongolia Merino were used. 34 lambs were randomly chosen for comparative slaughter, which were offered an identical mixture diet (concentrate:roughage=55:45) at 100, 75 or 55%of ad libitum intake, whereas the remainders were used in the metabolism trial to evaluate the ME of the diet after methane production was measured by open-circuit respirometry. As feed intake decreased from 100 to 75 and 55%of ad libitum intake, the apparent digestibility of dry matter (DM) linearly increased (P=0.010) from 60.8 to 63.6 and 66.9%, respectively, and methane production decreased from 52.1 to 44.3 and 39.9 L d-1, respectively, but the ratio of methane energy to gross energy intake increased linearly (P=0.010) from 8.20 to 8.96 and 10.97%, respectively. Consequently, the ME values of the diet increased from 9.35 to 9.64 and 9.85 MJ kg-1 DM, respectively. The NE requirement for maintenance (NEm) was 255 kJ kg-1 BW0.75, and the ME requirement for maintenance (MEm) was 352 kJ kg-1 BW0.75, with a partial energy efficiency for maintenance (km) of 0.72. The NE requirement for growth (NEg) ranged from 1.26 to 4.66 MJ d-1 as average daily gains increased from 100 to 300 g d-1, with a partial energy efficiency for growth (kg) of 0.45. These results indicated that the NEg required by crossbred female lambs of German Mutton Merino×Inner Mongolia Merino was lower than the recommendation of the American or British nutritional system.

  12. Ultraviolet and solar photocatalytic ozonation of municipal wastewater: Catalyst reuse, energy requirements and toxicity assessment.

    Science.gov (United States)

    Mecha, Achisa C; Onyango, Maurice S; Ochieng, Aoyi; Momba, Maggy N B

    2017-11-01

    The present study evaluated the treatment of municipal wastewater containing phenol using solar and ultraviolet (UV) light photocatalytic ozonation processes to explore comparative performance. Important aspects such as catalyst reuse, mineralization of pollutants, energy requirements, and toxicity of treated wastewater which are crucial for practical implementation of the processes were explored. The activity of the photocatalysts did not change significantly even after three consecutive uses despite approximately 2% of the initial quantity of catalyst being lost in each run. Analysis of the change in average oxidation state (AOS) demonstrated the formation of more oxidized degradation products (ΔAOS values of 1.0-1.7) due to mineralization. The energy requirements were determined in terms of electrical energy per order (EEO) and the collector area per order (ACO). The EEO (kWh m(-3) Order(-1)) values were 26.2 for ozonation, 38-47 for UV photocatalysis and 7-22 for UV photocatalytic ozonation processes. On the other hand, ACO (m(2) m(-3) order(-1)) values were 31-69 for solar photocatalysis and 8-13 for solar photocatalytic ozonation. Thus photocatalytic ozonation processes required less energy input compared to the individual processes. The cytotoxicity of the wastewater was analysed using the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay with Vero cells. The cell viability increased from 28.7% in untreated wastewater to 80% in treated wastewater; thus showing that the treated wastewater was less toxic. The effectiveness of photocatalytic ozonation, recovery and reusability of the photocatalysts, as well as detoxification of the wastewater make this low energy consumption process attractive for wastewater remediation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. A Study of Airbase Facility/Utility Energy R and D Requirements

    Science.gov (United States)

    1992-04-01

    The boiler on top of the tower captures the heat focused on it by the heliostat field and transfers it to a working fluid. The working fluid is then...The operation of these airbases, each similar to a small city, in a posture of readiness requires large amounts of energy for electric power, heating ...118 76 Simplified Schematic of a Stirling Cycle Heat Engine

  14. Industry requirements for introduction of alternative energies with emphasis on hydrogen fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Delabbio, F. [Rio Tinto, Canadian Exploration Ltd., Toronto, ON (Canada); Starbuck, D. [Newmont Mining Corp., Denver, CO (United States); Akerman, A. [CVRD-Inco, Toronto, ON (Canada); Betournay, M.C. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Mining and Mineral Sciences Laboratories

    2007-07-01

    This paper discussed issues related to the use of alternate sources of energy in underground mining applications. Hydrogen power systems were examined in relation to operational drivers, available commercial supplies, site supplies, health and safety issues, capital and operating costs, mine production, and the role of government. Hydrogen power systems are being considered for mining applications in an effort to reduce greenhouse gas (GHG) emissions and reduce cooling and ventilation requirements. This article examined a range of issues that must be addressed before alternate energy systems such as hydrogen fuel cell technology can be used in larger-scale underground mining applications. The mining industry supports the development of new technologies. However, the introduction of alternate energy technologies must proceed in steps which include proof of concept testing, the development of generic infrastructure, power systems and regulations, and whole operating system studies. 13 refs., 1 fig.

  15. Harvesting energy from the natural vibration of human walking.

    Science.gov (United States)

    Yang, Weiqing; Chen, Jun; Zhu, Guang; Yang, Jin; Bai, Peng; Su, Yuanjie; Jing, Qingsheng; Cao, Xia; Wang, Zhong Lin

    2013-12-23

    The triboelectric nanogenerator (TENG), a unique technology for harvesting ambient mechanical energy based on the triboelectric effect, has been proven to be a cost-effective, simple, and robust approach for self-powered systems. However, a general challenge is that the output current is usually low. Here, we demonstrated a rationally designed TENG with integrated rhombic gridding, which greatly improved the total current output owing to the structurally multiplied unit cells connected in parallel. With the hybridization of both the contact-separation mode and sliding electrification mode among nanowire arrays and nanopores fabricated onto the surfaces of two contact plates, the newly designed TENG produces an open-circuit voltage up to 428 V, and a short-circuit current of 1.395 mA with the peak power density of 30.7 W/m(2). Relying on the TENG, a self-powered backpack was developed with a vibration-to-electric energy conversion efficiency up to 10.62(±1.19) %. And it was also demonstrated as a direct power source for instantaneously lighting 40 commercial light-emitting diodes by harvesting the vibration energy from natural human walking. The newly designed TENG can be a mobile power source for field engineers, explorers, and disaster-relief workers.

  16. Body composition and energy and protein nutritional requirements for weight gain in Santa Ines crossbred sheep.

    Science.gov (United States)

    Cutrim, Darley Oliveira; Alves, Kaliandra Souza; dos Santos, Rozilda da Conceição; da Mata, Vanessa Jaqueline Veloso; Oliveira, Luis Rennan Sampaio; Gomes, Daiany Íris; Mezzomo, Rafael

    2016-03-01

    This study was conducted to evaluate the body composition and net energy and protein requirements for weight gain in Santa Ines crossbred sheep. Thirty woolless, 4-month-old, castrated male sheep with an initial body weight (BW) of 19.77 ± 1.99 kg were used. Six animals (reference group) were slaughtered after the adaptation period to estimate empty body weight (EBW) and initial body composition. The remaining 24 animals were randomly distributed among four treatments (experimental diets) and slaughtered when they reached 30.24 ± 0.78 kg BW. The body composition ranged from 162.88 to 160.4 g protein/kg EBW, from 59.49 to 164.23 g fat/kg EBW and from 1.54 to 2.46 Mcal energy/kg EBW for animals ranging between 20 and 30 kg BW. The net energy requirement for Santa Ines crossbred sheep linearly increased when BW increased from 20 to 30 kg. Within that same weight range, the net protein requirement for weight gain in sheep was constant, ranging from 12.61 to 12.42 g/day to 100 g daily weight gain.

  17. Capital requirements for the transportation of energy materials: 1979 ARC estimates. Draft final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-13

    This report contains TERA's estimates of capital requirements to transport natural gas, crude oil, petroleum products, and coal in the United States by 1990. The low, medium, and high world-oil-price scenarios from the EIA's Mid-range Energy Forecasting System (MEFS), as used in the 1979 Annual Report to Congress (ARC), were provided as a basis for the analysis and represent three alternative futures. TERA's approach varies by energy commodity to make best use of the information and analytical tools available. Summaries of transportation investment requirements through 1990 are given. Total investment requirements for three modes (pipelines, rails, waterways and the three energy commodities can accumulate to a $49.9 to $50.9 billion range depending on the scenario. The scenarios are distinguished primarily by the world price of oil which, given deregulation of domestic oil prices, affects US oil prices even more profoundly than in the past. The high price of oil, following the evidence of the last year, is projected to hold demand for oil below the recent past.

  18. Water-related environmental control requirements at municipal solid waste-to-energy conversion facilities

    Energy Technology Data Exchange (ETDEWEB)

    Young, J C; Johnson, L D

    1980-09-01

    Water use and waste water production, water pollution control technology requirements, and water-related limitations to their design and commercialization are identified at municipal solid waste-to-energy conversion systems. In Part I, a summary of conclusions and recommendations provides concise statements of findings relative to water management and waste water treatment of each of four municipal solid waste-to-energy conversion categories investigated. These include: mass burning, with direct production of steam for use as a supplemental energy source; mechanical processing to produce a refuse-derived fuel (RDF) for co-firing in gas, coal or oil-fired power plants; pyrolysis for production of a burnable oil or gas; and biological conversion of organic wastes to methane. Part II contains a brief description of each waste-to-energy facility visited during the subject survey showing points of water use and wastewater production. One or more facilities of each type were selected for sampling of waste waters and follow-up tests to determine requirements for water-related environmental controls. A comprehensive summary of the results are presented. (MCW)

  19. Pressure and specific energy requirements for densification of compost derived from swine solid fraction

    Directory of Open Access Journals (Sweden)

    N. Pampuro

    2013-07-01

    Full Text Available Compost derived from swine solid fraction is a low density material (bulk density less than 500 kg m-3. This makes it costly to transport from production sites to areas where it could be effectively utilized for value-added applications such as in soil fertilization. Densification is one possible way to enhance the storage and transportation of the compost. This study therefore investigates the effect of pressure (20-110 MPa and pressure application time (5-120 s on the compaction characteristics of compost derived from swine solid fraction. Two different types of material have been used: composted swine solid fraction derived from mechanical separation and compost obtained by mixing the first material with wood chips. Results obtained showed that both the pressure applied and the pressure application time significantly affect the density of the compacted samples; while the specific compression energy is significantly affected only by the pressure. Best predictor equations were developed to predict compact density and the specific compression energy required by the densification process. The specific compression energy values based on the results from this study (6-32 kJ kg-1 were significantly lower than the specific energy required to manufacture pellets from biomass feedstock (typically 19-90 kJ kg-1.

  20. Load profile impact on the gross energy requirement of stand-alone photovoltaic systems

    Energy Technology Data Exchange (ETDEWEB)

    Thiaux, Y.; Seigneurbieux, J.; Multon, B.; Ben Ahmed, H. [SATIE, ENS CACHAN Bretagne, CNRS, UEB, Avenue Robert Schuman, F-35170 Bruz (France)

    2010-03-15

    The sizing optimization of a Stand-Alone Photovoltaic system (SAPV) is a very complex issue. Therefore, a compromise solution must be made between having an acceptable energy and economic cost for the consumer, and a relatively correct energy supply quality. The Gross Energy Requirement (GER) of an SAPV system corresponds to the primary energy total amount required for the production, the maintenance and the recycling of this system. Reducing the GER is thus, an effective way to promote the development of SAPV systems. Therefore, the load profile management, in order to get closer to the ideal 'solar' consumer, allows the downsizing of the system. In this paper, a methodology for studying the impact of load profiles on GER is proposed. Two different modifications parameters have been considered theoretically on idealized load and production profiles: the load shifting which seems simpler to implement in the reality, and the amplitude modulation. Furthermore, the NSGA-II genetic algorithm has been used to confirm theoretical outcomes and to optimize SAPV system sizing for three realistic load profiles, with the aim of quantifying the GER reduction, by minimizing the storage capacity (taking into account the replacements due to cycling) which is one of the weak points of such a system, and by PV panels downsizing. (author)

  1. Charging a renewable future: The impact of electric vehicle charging intelligence on energy storage requirements to meet renewable portfolio standards

    Science.gov (United States)

    Forrest, Kate E.; Tarroja, Brian; Zhang, Li; Shaffer, Brendan; Samuelsen, Scott

    2016-12-01

    Increased usage of renewable energy resources is key for energy system evolution to address environmental concerns. Capturing variable renewable power requires the use of energy storage to shift generation and load demand. The integration of plug-in electric vehicles, however, impacts the load demand profile and therefore the capacity of energy storage required to meet renewable utilization targets. This study examines how the intelligence of plug-in electric vehicle (PEV) integration impacts the required capacity of energy storage systems to meet renewable utilization targets for a large-scale energy system, using California as an example for meeting a 50% and 80% renewable portfolio standard (RPS) in 2030 and 2050. For an 80% RPS in 2050, immediate charging of PEVs requires the installation of an aggregate energy storage system with a power capacity of 60% of the installed renewable capacity and an energy capacity of 2.3% of annual renewable generation. With smart charging of PEVs, required power capacity drops to 16% and required energy capacity drops to 0.6%, and with vehicle-to-grid (V2G) charging, non-vehicle energy storage systems are no longer required. Overall, this study highlights the importance of intelligent PEV charging for minimizing the scale of infrastructure required to meet renewable utilization targets.

  2. Energy and protein allowances and requirements in stallions during the breeding season, comparing different nutritional systems.

    Science.gov (United States)

    Mantovani, R; Bailoni, L

    2011-07-01

    This study was conducted to estimate the nutritional value of diets given to stallions of different breeds during the reproductive season, and comparing allowances with requirements. The systems compared were the French INRA, the 1989 NRC, and the 2007 NRC. Data on reproductive activity, daily exercise, BW, BCS, feed intake, and feed composition during 4 mo (from March to June) were recorded on 12 stallions used for commercial AI programs. Stallions belonged to 3 different breeds: Italian Haflinger (IH, n=4), Holstein (HOL, n=4), and Italian Heavy Draft horse (IHDH, n=4). Data recorded were used to estimate the actual energy and protein intakes and theoretical requirements of the stallions using the aforementioned systems. A deviation index [DI = (intake - requirement)/intake × -1] was calculated to allow a comparison among methods as a proportion of under- or overestimates of theoretical requirements. All data were statistically analyzed with a mixed model for repeated measurements. The reproductive activity of the stallions was affected by month (less in March and greater in subsequent months; Prequirements considering all 3 nutritional systems. Energy and protein INRA recommendations showed, on average, +0.90 and +0.27 greater DI than actual intakes, respectively, for IH and HOL stallions, whereas the theoretical requirements were much closer to allowances for the IHDH stallions (DI close to 0). The 1989 NRC energy and protein recommendations, respectively, were +0.67 and +0.87 greater than intake for IH, +0.28 and +0.43 greater for HOL, and only +0.06 and +0.17 greater for IHDH stallions. The 2007 NRC energy and protein recommendations, respectively, were +0.70 and +0.52 greater for IH, +0.33 and +0.17 greater for HOL, and +0.52 and +0.49 greater for IHDH than actual intakes. Therefore, all systems overestimated the requirements of the stallion, particularly in lighter breeds. Further studies to validate requirements for breeding stallions of different sizes

  3. Intergovernmental relations inherent in the Energy Management Partnership Act: a workshop on information requirements

    Energy Technology Data Exchange (ETDEWEB)

    Hoop, W.J.; Edelson, E.

    1980-02-01

    This paper summarizes the results of the first of three workshops that were planned to assess the information needed by the Office of Conservation and Solar Energy (CS) to effectively evaluate the pending Energy Management Partnership Act (EMPA); the workshop concentrated on issues of the EMPA hierarchical partnership. The approach utilized offers two major benefits to CS. First, by considering the problem of program evaluation while EMPA is still in the planning stage, this study identifies any baseline information that should be collected prior to implementation of EMPA, and also provides CS with the opportunity to include evaluation considerations in the operating guidelines for the program. Second, by identifying the potential problems and benefits inherent in EMPA and then identifying the information necessary to evaluate these problems and benefits, information requirements tied to the reasons for needing that information are generated, rather than a long unrelated laundry list of information requirements. Drafting of EMPA is not yet complete. When the term EMPA is used here, it refers to a set of bills that are presently being melded together. The original EMPA bill, which originated in DOE, was designed to expand the role of state and local governments in achieving national energy goals. Specifically, EMPA would provide a total of $110 million annually to state and local governments over a five year period to (1) develop an overall state energy plan, (2) consolidate three existing federal energy grant programs, (3) allow the secretary to fund directly innovative projects at the local level, and (4) provide additional assistance to states to cover the administrative costs of existing energy programs. Other bills, which may be passed in conjuncttion with EMPA or incorporated into EMPA, place additional emphasis on the local level by allocating as much as $400 million annually to local governments.

  4. Sustainable oceans in a 'civilized' world requires a sustainable human civilization. (Invited)

    Science.gov (United States)

    Caldeira, K.; Ricke, K.; Maclaren, J. K.

    2013-12-01

    The sustainability of the ocean ecosystems is, in many areas, threatened by local and regional activities, including the discharge of pollutants, loss of wetlands, and overfishing. However, some threats to ocean ecosystems, notably ocean acidification and climate change, are a consequence decisions that cannot be substantively addressed only through action that is proximal to the affected ecosystem. The only practical way to reduce risks to the ocean posed by ocean acidification and climate change is to transform our energy system into one that does not use the atmosphere and the ocean as waste dumps for unwanted byproducts of modern civilization. The required revolution in our systems of energy production and consumption is a key component of the transition to a sustainable human civilization. It would be much easier to maintain a sustainable ocean if doing so did not require creating a sustainable human civilization; but unfortunately the ocean does not get to choose the problems it faces. Damage to the ocean is additive, or perhaps multiplicative. Thus, the response of an ecosystem exposed to coastal pollutants, loss of wetlands, overfishing, ocean acidification, and climate change will likely be more dramatic than the response of an ecosystem exposed to ocean acidification and climate change alone. Thus, there is merit in reducing coastal pollution, preserving and restoring wetlands, and reducing excess fishing, even if the ocean acidification and climate problems are not solved. Furthermore, damage from ocean acidification and climate change is not a yes or no question. Each CO2 emission causes a little more acidification and a little more climate change and thus a little more damage to existing ocean ecosystems. Hence, each CO2 emission that can be avoided helps avoid a little bit of damage to ocean ecosystems the world over. While the overall problem of sustainability of the ocean is very difficult to solve, there is no shortage of things to do that would be

  5. Portable energy: autonomy and integration in the human environment; Energie portable: autonomie et integration dans l'environnement humain

    Energy Technology Data Exchange (ETDEWEB)

    Multon, F.; Delamarche, P. [Rennes-2 Universite, Lab. de Physiologie et de Biomecanique de l& #x27; Exercice Mulsculaire, UMR. APS, 35 (France); Lucchese, P. [CEA Fontenay-aux-Roses, Dir. de la Recherche Technologique, Hydrogene et Pile a Combustible, 92 (France)] [and others

    2002-07-01

    This colloquium was motivated by the possibility to recover in our environment the energy produced by our movements, but also the heat emitted and the radiations received by the human body in order to supply the energy needs of portable electronic devices (telephones, micro-computers, watches, prostheses etc..). It tries to answer the different problems raised by the implementation of portable energy sources: the energy resources in the human environment, the physical and technological processes of energy production and storage, the electronic energy conversion and remote transmission means, the intelligent energy management, and the existing and potential applications of these processes. This document brings together 16 communications presented by searchers from various domains (biology, medicine, electrochemistry, computer science, mechanics, thermodynamics, electronics etc..) on the following topics: energy in the human body, possibilities of miniaturization of fuel cells, thermo-mechanical micro-generators, thermoelectric generation, solar cells and autonomy, micro-chargeable batteries, double-layer super-capacitors (principles and electrical behaviour), renewable energies in watches, electro-mechanical devices for the exploitation of human movements energy, trans-dermal power supply, new mechanical-aided systems for blood circulation, problems and their solutions related to portable telephones, low voltage and high efficiency power electronic systems for portable applications, remote energy transmission, intelligent energy management (equipments and softwares), electromagnetic environments and health. (J.S.)

  6. Revision of the energy conservation requirements in the manufactured home construction and safety standards

    Energy Technology Data Exchange (ETDEWEB)

    Conner, C C; Lee, A D; Lucas, R G; Taylor, Z T

    1992-02-01

    Thermal requirements were developed for manufactured (mobile) homes in response to legislation requiring the US Department of Housing and Urban Development (HUD) to revise its thermal standards for manufactured homes. A life-cycle cost minimization from the home owner's perspecetive was used to establish an optimum in a large number of cities for several prototype homes. The development of the economic, financial, and energy conservation measure parameters input into the life-cycle cost analysis was documented. The optimization results were aggregated to zones which were expressed as a maximum overall home U-value (thermal transmittance) requirement. The revised standard's costs, benefits, and net value to the consumer were quantified. 50 refs.

  7. A Path to Planetary Protection Requirements for Human Exploration: A Literature Review and Systems Engineering Approach

    Science.gov (United States)

    Johnson, James E.; Conley, Cassie; Siegel, Bette

    2015-01-01

    As systems, technologies, and plans for the human exploration of Mars and other destinations beyond low Earth orbit begin to coalesce, it is imperative that frequent and early consideration is given to how planetary protection practices and policy will be upheld. While the development of formal planetary protection requirements for future human space systems and operations may still be a few years from fruition, guidance to appropriately influence mission and system design will be needed soon to avoid costly design and operational changes. The path to constructing such requirements is a journey that espouses key systems engineering practices of understanding shared goals, objectives and concerns, identifying key stakeholders, and iterating a draft requirement set to gain community consensus. This paper traces through each of these practices, beginning with a literature review of nearly three decades of publications addressing planetary protection concerns with respect to human exploration. Key goals, objectives and concerns, particularly with respect to notional requirements, required studies and research, and technology development needs have been compiled and categorized to provide a current 'state of knowledge'. This information, combined with the identification of key stakeholders in upholding planetary protection concerns for human missions, has yielded a draft requirement set that might feed future iteration among space system designers, exploration scientists, and the mission operations community. Combining the information collected with a proposed forward path will hopefully yield a mutually agreeable set of timely, verifiable, and practical requirements for human space exploration that will uphold international commitment to planetary protection.

  8. The Nuremberg Code subverts human health and safety by requiring animal modeling

    OpenAIRE

    Greek Ray; Pippus Annalea; Hansen Lawrence A

    2012-01-01

    Abstract Background The requirement that animals be used in research and testing in order to protect humans was formalized in the Nuremberg Code and subsequent national and international laws, codes, and declarations. Discussion We review the history of these requirements and contrast what was known via science about animal models then with what is known now. We further analyze the predictive...

  9. Large Scale Computing and Storage Requirements for Basic Energy Sciences Research

    Energy Technology Data Exchange (ETDEWEB)

    Gerber, Richard; Wasserman, Harvey

    2011-03-31

    The National Energy Research Scientific Computing Center (NERSC) is the leading scientific computing facility supporting research within the Department of Energy's Office of Science. NERSC provides high-performance computing (HPC) resources to approximately 4,000 researchers working on about 400 projects. In addition to hosting large-scale computing facilities, NERSC provides the support and expertise scientists need to effectively and efficiently use HPC systems. In February 2010, NERSC, DOE's Office of Advanced Scientific Computing Research (ASCR) and DOE's Office of Basic Energy Sciences (BES) held a workshop to characterize HPC requirements for BES research through 2013. The workshop was part of NERSC's legacy of anticipating users future needs and deploying the necessary resources to meet these demands. Workshop participants reached a consensus on several key findings, in addition to achieving the workshop's goal of collecting and characterizing computing requirements. The key requirements for scientists conducting research in BES are: (1) Larger allocations of computational resources; (2) Continued support for standard application software packages; (3) Adequate job turnaround time and throughput; and (4) Guidance and support for using future computer architectures. This report expands upon these key points and presents others. Several 'case studies' are included as significant representative samples of the needs of science teams within BES. Research teams scientific goals, computational methods of solution, current and 2013 computing requirements, and special software and support needs are summarized in these case studies. Also included are researchers strategies for computing in the highly parallel, 'multi-core' environment that is expected to dominate HPC architectures over the next few years. NERSC has strategic plans and initiatives already underway that address key workshop findings. This report includes a

  10. Digestible energy requirements of Mexican donkeys fed oat straw and maize stover.

    Science.gov (United States)

    Carretero-Roque, L; Colunga, B; Smith, D G; González-Ronquillo, M; Solis-Mendez, A; Castelán-Ortega, O

    2005-11-01

    The limited availability of food, together with the constraints that traditional management systems impose on the natural foraging behaviour of donkeys, often results in severe under-nutrition. Few studies have been conducted into the digestibility of different forages and little information exists on nutritional requirements of donkeys. In order to measure digestible energy requirements of donkeys under tropical conditions, an experiment was carried out at the Centre for Research in Agricultural Science (CICA) and the Faculty of Veterinary Medicine of the Universidad Aut6noma del Estado de México located in the Toluca valley, Central Mexico. Thirty-two donkeys of a body condition typical for Central Mexico were divided into four groups of 8 animals each according to their sex and live weight: group 1 (G1) comprised male donkeys below the average body weight (102+/-5 kg); group 2 (G2) comprised male donkeys of average body weight (121.5+/-4 kg); group 3 (G3) comprised female donkeys below average weight (111.8 +/- 5 kg); and group 4 (G4) comprised female donkeys of average weight (127.6 +/- 5 kg). A diet of oat straw or maize stover and 15% alfalfa hay was offered to meet exact maintenance requirements. The donkeys were monitored for 13 months. The live weight of all animals was recorded daily in order to monitor whether maintenance requirements were being met. Mean daily digestible energy (DE) requirements were measured during the winter, spring, summer and autumn of 2003-2004. Digestible energy requirements of all four sex and liveweight groups were significantly (p > 0.05) higher during the spring than during the other seasons of the year (13.5, 18.0, 10.4 and 14.3 MJ DE per day during winter, spring, summer and autumn, respectively). Predicted DE requirements of donkeys with a live weight range betweenn 90 and 150 kg using the data from the present study were less than those predicted using scaled-down horse feeding standards.

  11. Investigational new drug safety reporting requirements for human drug and biological products and safety reporting requirements for bioavailability and bioequivalence studies in humans. Final rule.

    Science.gov (United States)

    2010-09-29

    The Food and Drug Administration (FDA) is amending its regulations governing safety reporting requirements for human drug and biological products subject to an investigational new drug application (IND). The final rule codifies the agency's expectations for timely review, evaluation, and submission of relevant and useful safety information and implements internationally harmonized definitions and reporting standards. The revisions will improve the utility of IND safety reports, reduce the number of reports that do not contribute in a meaningful way to the developing safety profile of the drug, expedite FDA's review of critical safety information, better protect human subjects enrolled in clinical trials, subject bioavailability and bioequivalence studies to safety reporting requirements, promote a consistent approach to safety reporting internationally, and enable the agency to better protect and promote public health.

  12. DOE Zero Energy Ready Home Case Study: Manatee County Habitat for Humanity, Ellenton, Florida

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    In this 18-home community, all homes are LEED Platinum and meet ENERGY STAR for Homes Version 3 requirements, HERS 23–53. Half way through the project, Habitat for Humanity heard about the DOE Challenge Home program and signed on, committing to build the next home, a three-bedroom, two-bath, 1,143 ft2 duplex, to Challenge Home criteria. The home is the first DOE Challenge Home in Manatee County, and was awarded a 2013 Housing Innovation Award in the affordable builder category.

  13. Establishing energy requirements for body weight maintenance: validation of an intake-balance method.

    Science.gov (United States)

    Heymsfield, Steven B; Peterson, Courtney M; Thomas, Diana M; Hirezi, Michael; Zhang, Bo; Smith, Steven; Bray, George; Redman, Leanne

    2017-06-26

    Experimentally establishing a group's body weight maintenance energy requirement is an important component of metabolism research. At present, the reference approach for measuring the metabolizable energy intake (MEI) from foods required for body weight maintenance in non-confined subjects is the doubly-labeled water (DLW)-total energy expenditure (TEE) method. In the current study, we evaluated an energy-intake weight balance method as an alternative to DLW that is more flexible and practical to apply in some settings. The hypothesis was tested that MEI from foods observed in a group of subjects maintaining a constant energy intake while keeping their weight within ±1 kg over 10 days is non-significantly different from DLW-measured TEE (TEEDLW). Six non-obese subjects evaluated as part of an earlier study completed the inpatient protocol that included a 3-day initial adjustment period. The group body weight coefficient of variation (X ± SD) during the 10-day balance period was 0.38 ± 0.10% and the slope of the regression line for body weight versus protocol day was non-significant at 1.8 g/day (R(2), 0.002, p = 0.98). MEI from foods observed during the 10-day balance period (2390 ± 543 kcal/day) was non-significantly different (p = 0.96) from TEE measured by DLW (2373 ± 713 kcal/day); the MEI/TEEDLW ratio was 1.03 ± 0.15 (range 0.87-1.27) and the correlation between MEI from foods and TEEDLW was highly significant (R(2), 0.88, p = 0.005). A carefully managed 10-day protocol that includes a constant MEI level from foods with weight stability (±1 kg) will provide a group's body weight maintenance energy requirement similar to that obtained with DLW. This approach opens the possibility of conducting affordable weight balance studies, shorter in duration than those previously reported, that are needed to answer a wide range of questions in clinical nutrition. Trial registration The study is registered at http://www.clinicaltrials.gov (NCT

  14. Influence of drying conditions on the effective moisture diffusivity and energy requirements during the drying of pretreated and untreated pumpkin

    Energy Technology Data Exchange (ETDEWEB)

    Tunde-Akintunde, Toyosi Y.; Ogunlakin, Grace O. [Ladoke Akintola University of Technology, PMB 4000, Ogbomoso, Oyo State (Nigeria)

    2011-02-15

    Pumpkin as a fruit is consumed by both animals and humans. Its high moisture content makes it perishable and thus there is a need for drying as a means of preservation. Thin-layer drying characteristics for the samples dried using a hot-air dryer were obtained from the experiment data. The drying was observed to take place in the falling rate drying period. Ficks law was used to determine the moisture diffusivity which varied from a minimum of 1.19 x 10{sup -9} m{sup 2}/s for untreated pumpkin samples dried at 40 C to a maximum value of 4.27 x 10{sup -9} m{sup 2}/s for steam blanched samples dried at 80 C. The value of the energy of activation varied from 21.44 to 28.67 kJ/mol. The input energy values and specific energy requirement for thin-drying of pumpkin samples were found to be in the range of 317.8-458.1 kW h and 1588.8-2290.3 kW h/kg from 40 C to 80 C with a drying air velocity of 1.5 m/s respectively. (author)

  15. Overview of human obesity and central mechanisms regulating energy homeostasis.

    Science.gov (United States)

    Crowley, Vivion E F

    2008-05-01

    Obesity is now regarded as a global epidemic affecting both adults and children, and is associated with significant morbidity and mortality. Thus the effective management of obesity has become an important clinical focus. Therefore, an understanding of the pathways controlling appetite, satiety and food intake is critical for gaining an insight into the pathogenesis of obesity and also for the development of diagnostic tests and therapeutic agents for use in the clinical management of this condition. Over the last decade or more research using both mouse and human genetic models has elucidated the critical role of the leptin-melanocortin pathway in the hypothalamus, in regulating mammalian energy balance. In tandem with this, a clearer understanding of the regulation of gut-derived hormones and their interaction with the central nervous system has further illuminated the complex interplay between central and peripheral aspects of energy regulation. The obesity epidemic and the expanded knowledge base relating to its aetiopathogenesis have specific implications for clinical biochemistry. In particular, an increase in workload may be expected due to biochemical investigation of obesity and its co-morbidities. Moreover, advice on the in-depth investigation of complex cases of obesity may be sought, including information on newer diagnostic tests, such as serum leptin or molecular genetic analysis. There may also be a substantive role for chemical pathologists in establishing and running clinical obesity services. Finally, clinical biochemistry has a role in research pertaining to obesity and cardiometabolic risk.

  16. Energy-Efficient Crowdsensing of Human Mobility and Signal Levels in Cellular Networks.

    Science.gov (United States)

    Foremski, Paweł; Gorawski, Michał; Grochla, Krzysztof; Polys, Konrad

    2015-09-02

    The paper presents a practical application of the crowdsensing idea to measure human mobility and signal coverage in cellular networks. Currently, virtually everyone is carrying a mobile phone, which may be used as a sensor to gather research data by measuring, e.g., human mobility and radio signal levels. However, many users are unwilling to participate in crowdsensing experiments. This work begins with the analysis of the barriers for engaging people in crowdsensing. A survey showed that people who agree to participate in crowdsensing expect a minimum impact on their battery lifetime and phone usage habits. To address these requirements, this paper proposes an application for measuring the location and signal strength data based on energy-efficient GPS tracking, which allows one to perform the measurements of human mobility and radio signal levels with minimum energy utilization and without any engagement of the user. The method described combines measurements from the accelerometer with effective management of the GPS to monitor the user mobility with the decrease in battery lifetime by approximately 20%. To show the applicability of the proposed platform, the sample results of signal level distribution and coverage maps gathered for an LTE network and representing human mobility are shown.

  17. Nuclear Accidents: Consequences for Human, Society and Energy Sector

    Directory of Open Access Journals (Sweden)

    L. A. Bolshov

    2016-01-01

    Full Text Available The article examines radiation and hygienic regulations with regard to the elimination of consequences of the Chernobyl NPP accident in the context of relationships with other aspects, primarily socio-economic and political factors. This experience is reasonable to take into account when defining criteria in other regulatory fields, for example, in radioactive waste classification and remediation of areas. The article presents an analysis of joint features and peculiarities of nuclear accidents in the industry and energy sectors. It is noted that the scale of global consequences of the Chernobyl NPP accident is defined by the large-scale release of radioactivity into the environment, as well as an affiliation of the nuclear installation with the energy sector. Large-scale radiation accidents affect the most diverse spheres of human activities, what, in its turn, evokes the reverse reaction from the society and its institutions, including involvement of political means of settlement. If the latter is seeing for criteria that are scientifically justified and feasible, then the preconditions for minimizing socio-economic impacts are created. In other cases, political decisions, such as nuclear units’ shutdown and phasing out of nuclear energy, appear to be an economic price which society, as a whole and a single industry sector, pay to compensate the negative public response. The article describes fundamental changes in approaches to ensure nuclear and radiation safety that occurred after the Chernobyl NPP accident. Multiple and negative consequences of the Chernobyl accident for human and society are balanced to some extent by a higher level of operational safety, emergency preparedness, and life-cycle safety. The article indicates that harmonization and ensuring consistency of regulations that involve different aspects of nuclear and radiation safety are important to implement practical solutions to the nuclear legacy problems. The

  18. Selection for high and low oxygen consumption-induced differences in maintenance energy requirements of mice.

    Science.gov (United States)

    Darhan, Hongyu; Kikusato, Motoi; Toyomizu, Masaaki; Roh, Sang-Gun; Katoh, Kazuo; Sato, Masahiro; Suzuki, Keiichi

    2017-07-01

    Maintenance energy requirements (MER) of mice selected for high (H) or low (L) oxygen consumption (OC) were compared. Forty-four mice from H and L OC lines were weaned at 3 weeks and divided into four experimental groups: group A were sacrificed at 4 weeks; group B were fed ad libitum, and groups C and D were fed 2.8 and 2.4 g/day, respectively, from 4 to 8 weeks of age. Groups B-D were sacrificed at 8 weeks. Chemical components were estimated for all groups. MER was estimated using a model that partitioned metabolizable energy intake into that used for maintenance, and protein and fat deposition. The feed conversion ratio for the B group was significantly higher in the H than in the L line. Feed intake for metabolic energy content per metabolic body size was significantly also higher in the H line, whereas accumulated energy content per metabolic body size was significantly higher in the L line. MER of the H line was greater than that of the L line (P < 0.10). These results suggest that selection for H or L OC produced differences in chemical components, feed efficiency, and MER between the H and L lines. © 2016 Japanese Society of Animal Science.

  19. Liquid-Desiccant Vapor Separation Reduces the Energy Requirements of Atmospheric Moisture Harvesting.

    Science.gov (United States)

    Gido, Ben; Friedler, Eran; Broday, David M

    2016-08-02

    An innovative atmospheric moisture harvesting system is proposed, where water vapor is separated from the air prior to cooling and condensation. The system was studied using a model that simulates its three interconnected cycles (air, desiccant, and water) over a range of ambient conditions, and optimal configurations are reported for different operation conditions. Model results were compared to specifications of commercial atmospheric moisture harvesting systems and found to represent saving of 5-65% of the electrical energy requirements due to the vapor separation process. We show that the liquid desiccant separation stage that is integrated into atmospheric moisture harvesting systems can work under a wide range of environmental conditions using low grade or solar heating as a supplementary energy source, and that the performance of the combined system is superior.

  20. Prediction of Draft Force and Energy Requirement for Subsoiling Operation with a Fuzzy Logic Approach

    Directory of Open Access Journals (Sweden)

    Y Abbaspour Gilandeh

    2013-09-01

    Full Text Available In this study, a knowledge-based fuzzy logic system was developed on experimental data and used to predict the draft force and energy requirement of tillage operation. In comparison with traditional methods, the fuzzy logic model acts more effectively in creating a relationship between multiple inputs to achieve an output signal in a nonlinear range. Field experiments were carried out in a sandy loam soil on coastal plain at the Edisto Research and Education Center of Clemson University near Blackville, South Carolina (Latitude 33˚ 21"N, Longitude 81˚ 18"W. In this paper, a fuzzy model based on Mamdani inference system has been used. This model was developed for predicting the changes of draft force and energy requirement for subsoiling operation. This fuzzy model contains 25 rules. In this investigation, the Mamdani Max-Min inference was used for deducing the mechanism (composition of fuzzy rules with input. The center of gravity defuzzification method was also used for conversion of the final output of the system into a classic number. The validity of the presented model was achieved by numerical error criterion, based on empirical data. The prediction results showed a close relationship between measured and predicted values such that the mean relative error of measured and predicted values were 3.1% and 2.94% for draft resistant force and energy required for subsoiling operation, respectively. The comparison between the fuzzy logic model and the regression models showed that the mean relative errors from the regression model are greater than that from the fuzzy logic model.

  1. Accelerated carbonation of steel slags using CO2 diluted sources: CO2 uptakes and energy requirements

    Directory of Open Access Journals (Sweden)

    Renato eBaciocchi

    2016-01-01

    Full Text Available This work presents the results of carbonation experiments performed on Basic Oxygen Furnace (BOF steel slag samples employing gas mixtures containing 40 and 10% CO2 vol. simulating the gaseous effluents of gasification and combustion processes respectively, as well as 100% CO2 for comparison purposes. Two routes were tested, the slurry phase (L/S=5 l/kg, T=100 °C and Ptot=10 bar and the thin film (L/S =0.3-0.4 l/kg, T=50 °C and Ptot=7-10 bar routes. For each one, the CO2 uptake achieved as a function of the reaction time was analyzed and on this basis the energy requirements associated to each carbonation route and gas mixture composition were estimated considering to store the CO2 emissions of a medium size natural gas fired power plant (20 MW. For the slurry phase route, maximum CO2 uptakes ranged from around 8% at 10% CO2, to 21.1% (BOF-a and 29.2% (BOF-b at 40% CO2 and 32.5% (BOF-a and 40.3% (BOF-b at 100% CO2. For the thin film route, maximum uptakes of 13% (BOF-c and 19.5% (BOF-d at 40% CO2, and 17.8% (BOF-c and 20.2% (BOF-d at 100% were attained. The energy requirements of the two analyzed process routes appeared to depend chiefly on the CO2 uptake of the slag. For both process route, the minimum overall energy requirements were found for the tests with 40% CO2 flows (i.e. 1400-1600 MJ/t CO2 for the slurry phase and 2220-2550 MJ/t CO2 for the thin film route.

  2. Energy and pressure requirements for compression of swine solid fraction compost

    Directory of Open Access Journals (Sweden)

    Niccolò Pampuro

    2013-09-01

    Full Text Available The excessive amount of pig slurry spread on soil has contributed to nitrate water pollution both in surface and in ground waters, especially in areas classified as vulnerable zones to nitrate in accordance with European Regulation (91/676/CEE. Several techniques have been developed to manage livestock slurries as cheaply and conveniently as possible and to reduce potential risks of environmental pollution. Among these techniques, solid-liquid separation of slurry is a common practice in Italy. The liquid fraction can be used for irrigation and the solid fraction, after aerobic stabilization, produces an organic compost rich in humic substances. However, compost derived from swine solid fraction is a low density material (bulk density less than 500 kgm–3. This makes it costly to transport composted swine solid fraction from production sites to areas where it could be effectively utilized for value-added applications such as in soil fertilization. Densification is one possible way to enhance the storage and transportation of the compost. This study therefore investigates the effect of pressure (20- 110 MPa and pressure application time (5-120 s on the compaction characteristics of compost derived from swine solid fraction. Two different types of material have been used: composted swine solid fraction derived from mechanical separation and compost obtained by mixing the first material with wood chips. Results obtained showed that both the pressure applied and the pressure application time significantly affect the density of the compacted samples; while the specific compression energy is significantly affected only by the pressure. Best predictor equations were developed to predict compact density and the specific compression energy required by the densification process. The specific compression energy values based on the results from this study (6-32 kJkg–1 were significantly lower than the specific energy required to manufacture pellets from

  3. 41 CFR 102-74.200 - What information are Federal agencies required to report to the Department of Energy (DOE)?

    Science.gov (United States)

    2010-07-01

    ...)? Federal agencies, upon approval of GSA, must report to the DOE the energy consumption in buildings... Federal agencies required to report to the Department of Energy (DOE)? 102-74.200 Section 102-74.200...) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 74-FACILITY MANAGEMENT Facility Management Energy...

  4. Department of Energy Environmental Management cost infrastructure development program: Cost analysis requirements

    Energy Technology Data Exchange (ETDEWEB)

    Custer, W.R. Jr.; Messick, C.D.

    1996-03-31

    This report was prepared to support development of the Department of Energy Environmental Management cost infrastructure -- a new capability to independently estimate and analyze costs. Currently, the cost data are reported according to a structure that blends level of effort tasks with product and process oriented tasks. Also. the budgetary inputs are developed from prior year funding authorizations and from contractor-developed parametric estimates that have been adjusted to planned funding levels or appropriations. Consequently, it is difficult for headquarters and field-level activities to use actual cost data and technical requirements to independently assess the costs generated and identify trends, potential cost savings from process improvements, and cost reduction strategies.

  5. Distributed Control and Management of Renewable Electric Energy Resources for Future Grid Requirements

    DEFF Research Database (Denmark)

    Mokhtari, Ghassem; Anvari-Moghaddam, Amjad; Nourbakhsh, Ghavameddin

    2016-01-01

    It is anticipated that both medium- and low-voltage distribution networks will include high level of distributed renewable energy resources, in the future. The high penetration of these resources inevitably can introduce various power quality issues, including; overvoltage and overloading...... strategy is a promising approach to manage and utilise the resources in future distribution networks to effectively deal with grid electric quality issues and requirements. Jointly, utility and customers the owners of the resources in the network are considered as part of a practical coordination strategy...

  6. In vitro RNA editing in plant mitochondria does not require added energy.

    Science.gov (United States)

    Takenaka, Mizuki; Verbitskiy, Daniil; van der Merwe, Johannes A; Zehrmann, Anja; Plessmann, Uwe; Urlaub, Henning; Brennicke, Axel

    2007-06-12

    RNA editing in flowering plant mitochondria is investigated by in vitro assays. These cauliflower mitochondrial lysates require added NTP or dNTP. We have now resolved the reason for this requirement to be the inhibition of the RNA binding activity of the glutamate dehydrogenases (GDH). Both GDH1 and GDH2 were identified in RNA-protein cross-links. The inhibition of in vitro RNA editing by GDH is confirmed by the ability of the GDH-specific herbicide phosphinothricin to substitute for NTP. NADH and NADPH, but not NAD or NADP, can also replace NTP, suggesting that the NAD(P)H-binding-pocket configuration of the GDH contacts the RNA. RNA editing in plant mitochondria is thus intrinsically independent of added energy in the form of NTP.

  7. A Cognitive Systems Engineering Approach to Developing Human Machine Interface Requirements for New Technologies

    Science.gov (United States)

    Fern, Lisa Carolynn

    This dissertation examines the challenges inherent in designing and regulating to support human-automation interaction for new technologies that will be deployed into complex systems. A key question for new technologies with increasingly capable automation, is how work will be accomplished by human and machine agents. This question has traditionally been framed as how functions should be allocated between humans and machines. Such framing misses the coordination and synchronization that is needed for the different human and machine roles in the system to accomplish their goals. Coordination and synchronization demands are driven by the underlying human-automation architecture of the new technology, which are typically not specified explicitly by designers. The human machine interface (HMI), which is intended to facilitate human-machine interaction and cooperation, typically is defined explicitly and therefore serves as a proxy for human-automation cooperation requirements with respect to technical standards for technologies. Unfortunately, mismatches between the HMI and the coordination and synchronization demands of the underlying human-automation architecture can lead to system breakdowns. A methodology is needed that both designers and regulators can utilize to evaluate the predicted performance of a new technology given potential human-automation architectures. Three experiments were conducted to inform the minimum HMI requirements for a detect and avoid (DAA) system for unmanned aircraft systems (UAS). The results of the experiments provided empirical input to specific minimum operational performance standards that UAS manufacturers will have to meet in order to operate UAS in the National Airspace System (NAS). These studies represent a success story for how to objectively and systematically evaluate prototype technologies as part of the process for developing regulatory requirements. They also provide an opportunity to reflect on the lessons learned in order

  8. Energy absorption buildup factors of human organs and tissues at energies and penetration depths relevant for radiotherapy and diagnostics.

    Science.gov (United States)

    Manohara, S R; Hanagodimath, S M; Gerward, L

    2011-11-15

    Energy absorption geometric progression (GP) fitting parameters and the corresponding buildup factors have been computed for human organs and tissues, such as adipose tissue, blood (whole), cortical bone, brain (grey/white matter), breast tissue, eye lens, lung tissue, skeletal muscle, ovary, testis, soft tissue, and soft tissue (4-component), for the photon energy range 0.015-15 MeV and for penetration depths up to 40 mfp (mean free path). The chemical composition of human organs and tissues is seen to influence the energy absorption buildup factors. It is also found that the buildup factor of human organs and tissues changes significantly with the change of incident photon energy and effective atomic number, Z(eff). These changes are due to the dominance of different photon interaction processes in different energy regions and different chemical compositions of human organs and tissues. With the proper knowledge of buildup factors of human organs and tissues, energy absorption in the human body can be carefully controlled. The present results will help in estimating safe dose levels for radiotherapy patients and also useful in diagnostics and dosimetry. The tissue-equivalent materials for skeletal muscle, adipose tissue, cortical bone, and lung tissue are also discussed. It is observed that water and MS20 are good tissue equivalent materials for skeletal muscle in the extended energy range.

  9. Human Factors Engineering Requirements for the International Space Station - Successes and Challenges

    Science.gov (United States)

    Whitmore, M.; Blume, J.

    2003-01-01

    Advanced technology coupled with the desire to explore space has resulted in increasingly longer human space missions. Indeed, any exploration mission outside of Earth's neighborhood, in other words, beyond the moon, will necessarily be several months or even years. The International Space Station (ISS) serves as an important advancement toward executing a successful human space mission that is longer than a standard trip around the world or to the moon. The ISS, which is a permanently occupied microgravity research facility orbiting the earth, will support missions four to six months in duration. In planning for the ISS, the NASA developed an agency-wide set of human factors standards for the first time in a space exploration program. The Man-Systems Integration Standard (MSIS), NASA-STD-3000, a multi-volume set of guidelines for human-centered design in microgravity, was developed with the cooperation of human factors experts from various NASA centers, industry, academia, and other government agencies. The ISS program formed a human factors team analogous to any major engineering subsystem. This team develops and maintains the human factors requirements regarding end-to-end architecture design and performance, hardware and software design requirements, and test and verification requirements. It is also responsible for providing program integration across all of the larger scale elements, smaller scale hardware, and international partners.

  10. Opportunities and requirements for experimentation at high energy e/sup +/e/sup /minus// collider

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, C.; Baltay, C.; Barklow, T.L.; Burchat, P.R.; Burke, D.L.; Cooper, A.R.; Dib, C.; Feldman, G.J.; Gunion, J.F.; Haber, H.E.

    1988-05-01

    Over the past fifteen years of high-energy physics, electron-positron annihilation has been the most productive of all reactions probing the fundamental interactions. The e/sup +/e/sup /minus// annihilation process is unique in offering at the same time copious production of novel particles, low backgrounds from more conventional physics, and the most efficient use of the energy which an accelerator provides. These features have allowed the detailed characterization of the charm and bottom quark-antiquark systems and the unambiguous discovery of gluon jets---the crucial ingredients in the establishment of Quantum Chromodynamics as the correct theory of the strong interactions---as well as the discovery of the tau lepton and confirmation of the weak and electromagnetic properties of all the quarks and leptons at high energy. Over the past few years, experiments will begin at SLC and LEP, and we anticipate new discoveries from the detailed study of the Z/sup 0/ resonance. It is time, then to begin to think out how one might continue this mode experimentation to still higher energies. This document is the report of a committee convened by the Director of SLAC, Burton Richter, to set out the major physics goals of an e/sup +/e/sup /minus// collider in the energy range 600 GeV-1 TeV, corresponding to the next feasible step in accelerator technology. The committee was charged with the task of outlining the main experiments that such a collider might carry out and the requirements which those experiments place on the accelerator design. 106 refs., 105 figs., 13 tabs.

  11. Effect of protein-energy malnutrition on erythropoietin requirement in maintenance hemodialysis patients.

    Science.gov (United States)

    Akgul, Arzu; Bilgic, Ayse; Sezer, Siren; Ozdemir, Fatma Nurhan; Olcay, Irem; Arat, Zubeyde; Haberal, Mehmet

    2007-04-01

    Possible interactions between inflammatory and nutritional markers and their impact on recombinant human erythropoietin (rHuEPO) hyporesponsiveness are not well understood. We investigated the role of nutritional status in rHuEPO requirement in maintenance hemodialysis (MHD) patients without evidence of inflammation. This cross-sectional study included 88 MHD patients. The associations between required rHuEPO dose and malnutrition-inflammation score (MIS) and several laboratory values known to be related to nutrition and/or inflammation were analyzed. Anthropometric measures including body mass index, triceps skinfold thickness, and midarm circumferences were also measured. Twenty-three patients with serum C-reactive protein levels >10 mg/L were excluded from the analysis. The remaining 65 patients (male/female, 41/24; age 49.1+/-11.4 years; dialysis duration 99.7+/-63.0 months) were studied. These patients had moderate malnutrition and the average MIS was 7.4 (range 3-17). The average weekly dose of administered rHuEPO was 69.1+/-63.1 U/kg. Malnutrition-inflammation score had a positive correlation with the serum concentration of tumor necrosis factor-alpha, whereas it had a negative correlation with anthropometric measures, total iron-binding capacity, prealbumin, phosphorus, creatinine, and triglyceride. According to Pearson's correlation analysis, significant relationships of increased MIS with increased required rHuEPO dose and rHuEPO responsiveness index (EPO divided by hematocrit) were observed (p=0.008, r=-0.326; p=0.017, r=-0.306, respectively). Recombinant human erythropoietin dose requirement is correlated with MIS and adverse nutritional status in MHD patients without evidence of inflammation. Further research should focus on reversing the undergoing microinflammation for a better outcome in dialysis patients.

  12. Estimating energy requirements in hospitalised underweight and obese patients requiring nutritional support: a survey of dietetic practice in the United Kingdom.

    Science.gov (United States)

    Judges, D; Knight, A; Graham, E; Goff, L M

    2012-03-01

    Many methods are available to determine energy requirements, however, all have limitations, particularly when used for the obese. The aim of this survey was to investigate current practice in the estimation of energy requirements in an underweight and obese hospitalised patient in a large cohort of UK dietitians. A cross-sectional anonymous online survey of UK registered dietitians was performed. A total of 672 responses were received. Underweight patient: prediction equations with adjustment for metabolic stress and physical activity were most commonly used (90%). The median estimated energy requirement was 2079 kcals/day. The estimated energy requirement using calorie per kilogram method was significantly lower compared with equations (Prequirements was found (PNutrition support dietitians used a lower stress factor compared with non-nutrition support dietitians (P=0.016). Method used to estimate the energy requirements was associated with years in clinical practice and place of work (Prequirements was found, particularly in the obese patient group. In an age of rapidly increasing rates of obesity a professional consensus of treatment of this patient group is needed.

  13. FEATURES OF HUMAN RESOURCES IN THE OLTENIA ENERGY COMPLEX IMPORTANT PART OF THE COUNTY'S LABOR MARKET RESOURCES GORJ COUNTY

    Directory of Open Access Journals (Sweden)

    Păunescu Alberto Nicolae

    2013-06-01

    Full Text Available Currently the company Oltenia Energy Complex is in a comprehensive reorganization but not completed. This project implies also the restructuring the workforce including labor force county level. Due to increased production from renewable resources (due to legislation that lead to low price sale by manufacturers and high income by selling green certificates allocated requires a shift in market strategy and the unit with powerful implications on human resources both in the manufacturing sector, energy, heat mining sector, as well as TESA(economic, technical, service, administrative. This implies at least retraining and reducing staff in compliance with the new realities of Energy.

  14. Human NK cells of mice with reconstituted human immune system components require preactivation to acquire functional competence.

    Science.gov (United States)

    Strowig, Till; Chijioke, Obinna; Carrega, Paolo; Arrey, Frida; Meixlsperger, Sonja; Rämer, Patrick C; Ferlazzo, Guido; Münz, Christian

    2010-11-18

    To investigate human natural killer (NK)-cell reactivity in vivo we have reconstituted human immune system components by transplantation of human hematopoietic progenitor cells into NOD-scid IL2Rγ(null) mice. We demonstrate here that this model allows the development of all NK-cell subsets that are also found in human adult peripheral and cord blood, including NKp46(+)CD56(-) NK cells. Similar to human cord blood, NK cells from these reconstituted mice require preactivation by interleukin-15 to reach the functional competence of human adult NK cells. Mainly the terminally differentiated CD16(+) NK cells demonstrate lower reactivity without this stimulation. After preactivation, both CD16(+) and CD16(-) NK cells efficiently produce interferon-γ and degranulate in response to stimulation with NK cell-susceptible targets, including K562 erythroleukemia cells. NK-cell lines, established from reconstituted mice, demonstrate cytotoxicity against this tumor cell line. Importantly, preactivation can as well be achieved by bystander cell maturation via poly I:C stimulation in vitro and injection of this maturation stimulus in vivo. Preactivation in vivo enhances killing of human leukocyte antigen class I negative tumor cells after their adoptive transfer. These data suggest that a functional, but resting, NK-cell compartment can be established in immune-compromised mice after human hematopoietic progenitor cell transfer.

  15. Predicting energy requirement with pedometer-determined physical-activity level in women with chronic obstructive pulmonary disease.

    Science.gov (United States)

    Farooqi, Nighat; Slinde, Frode; Carlsson, Maine; Håglin, Lena; Sandström, Thomas

    2015-01-01

    In clinical practice, in the absence of objective measures, simple methods to predict energy requirement in patients with chronic obstructive pulmonary disease (COPD) needs to be evaluated. The aim of the present study was to evaluate predicted energy requirement in females with COPD using pedometer-determined physical activity level (PAL) multiplied by resting metabolic rate (RMR) equations. Energy requirement was predicted in 18 women with COPD using pedometer-determined PAL multiplied by six different RMR equations (Harris-Benedict; Schofield; World Health Organization; Moore; Nordic Nutrition Recommendations; Nordenson). Total energy expenditure (TEE) was measured by the criterion method: doubly labeled water. The predicted energy requirement was compared with measured TEE using intraclass correlation coefficient (ICC) and Bland-Altman analyses. The energy requirement predicted by pedometer-determined PAL multiplied by six different RMR equations was within a reasonable accuracy (±10%) of the measured TEE for all equations except one (Nordenson equation). The ICC values between the criterion method (TEE) and predicted energy requirement were: Harris-Benedict, ICC =0.70, 95% confidence interval (CI) 0.23-0.89; Schofield, ICC =0.71, 95% CI 0.21-0.89; World Health Organization, ICC =0.74, 95% CI 0.33-0.90; Moore, ICC =0.69, 95% CI 0.21-0.88; Nordic Nutrition Recommendations, ICC =0.70, 95% CI 0.17-0.89; and Nordenson, ICC =0.40, 95% CI -0.19 to 0.77. Bland-Altman plots revealed no systematic bias for predicted energy requirement except for Nordenson estimates. For clinical purposes, in absence of objective methods such as doubly labeled water method and motion sensors, energy requirement can be predicted using pedometer-determined PAL and common RMR equations. However, for assessment of nutritional status and for the purpose of giving nutritional treatment, a clinical judgment is important regarding when to accept a predicted energy requirement both at individual

  16. Incorporating human-triggered earthquake risks into energy and water policies

    Science.gov (United States)

    Klose, C. D.; Seeber, L.; Jacob, K. H.

    2010-12-01

    A comprehensive understanding of earthquake risks in urbanized regions requires an accurate assessment of both urban vulnerabilities and hazards from earthquakes, including ones whose timing might be affected by human activities. Socioeconomic risks associated with human-triggered earthquakes are often misconstrued and receive little scientific, legal, and public attention. Worldwide, more than 200 damaging earthquakes, associated with industrialization and urbanization, were documented since the 20th century. Geomechanical pollution due to large-scale geoengineering activities can advance the clock of earthquakes, trigger new seismic events or even shot down natural background seismicity. Activities include mining, hydrocarbon production, fluid injections, water reservoir impoundments and deep-well geothermal energy production. This type of geohazard has impacts on human security on a regional and national level. Some planned or considered future engineering projects raise particularly strong concerns about triggered earthquakes, such as for instance, sequestration of carbon dioxide by injecting it deep underground and large-scale natural gas production in the Marcellus shale in the Appalacian basin. Worldwide examples of earthquakes are discussed, including their associated losses of human life and monetary losses (e.g., 1989 Newcastle and Volkershausen earthquakes, 2001 Killari earthquake, 2006 Basel earthquake, 2010 Wenchuan earthquake). An overview is given on global statistics of human-triggered earthquakes, including depths and time delay of triggering. Lastly, strategies are described, including risk mitigation measures such as urban planning adaptations and seismic hazard mapping.

  17. Soft tissues store and return mechanical energy in human running.

    Science.gov (United States)

    Riddick, R C; Kuo, A D

    2016-02-08

    During human running, softer parts of the body may deform under load and dissipate mechanical energy. Although tissues such as the heel pad have been characterized individually, the aggregate work performed by all soft tissues during running is unknown. We therefore estimated the work performed by soft tissues (N=8 healthy adults) at running speeds ranging 2-5 m s(-1), computed as the difference between joint work performed on rigid segments, and whole-body estimates of work performed on the (non-rigid) body center of mass (COM) and peripheral to the COM. Soft tissues performed aggregate negative work, with magnitude increasing linearly with speed. The amount was about -19 J per stance phase at a nominal 3 m s(-1), accounting for more than 25% of stance phase negative work performed by the entire body. Fluctuations in soft tissue mechanical power over time resembled a damped oscillation starting at ground contact, with peak negative power comparable to that for the knee joint (about -500 W). Even the positive work from soft tissue rebound was significant, about 13 J per stance phase (about 17% of the positive work of the entire body). Assuming that the net dissipative work is offset by an equal amount of active, positive muscle work performed at 25% efficiency, soft tissue dissipation could account for about 29% of the net metabolic expenditure for running at 5 m s(-1). During running, soft tissue deformations dissipate mechanical energy that must be offset by active muscle work at non-negligible metabolic cost.

  18. Energy and Protein Requirements for - to -Week-Age Gushi Chicks

    Institute of Scientific and Technical Information of China (English)

    KANG Xiang-tao; TIAN Ya-dong; SONG Su-fang

    2002-01-01

    In this experiment, 540 male and female chicks of 1-day-age were selected respectively and reared separately. 3 × 3 factorial experiment was designed. Gushi chicks were fed with nine diets under different metabolizable energy (ME) and crude protein (CP). Effects of different diets on the performances and carcass ingredients of 0-to 4-week-age Gushi chicks were studied by rearing, comparative slaughter and metabolism experiments. Based on the results of three experiments, ME intake per kilogram metabolic weight was regarded as dependent variable (Y), and its corresponding net energy (NE) deposition per kilogram metabolic weight was regarded as independent variable (X), respectively. Lineal regressive analysis was made according to the mathematic model: Y=a+bX. Maintenance ME(MEm) and the converted coefficient from net energy for gain(NEg) to ME for gain(MEg) were found out, then ME requirement was divided into MErm+ MEg,which is ME = 359.14 W0.75 + 10.47/△W; CP intake and corresponding metabolic weight were regarded as dependent variable and independent variable respectively, and then regressive analysis was made. The result was CP = 0. 57 + 8.21 W0.75. Consequently, average daily gain (ADG), average daily feed intake and metabolic weight were put into the regressive equations, and then ME and CP requirements for 0- to 4-week-age Gushi chicks were obtained, 12.38 MJ kg-1 and 20.13%, respectively, the ratio of CP to ME was 16.26 g MJ-1.

  19. Patterns of Selection of Human Movements III: Energy Efficiency, Mechanical Advantage, and Walking Gait

    OpenAIRE

    Hagler, Stuart

    2016-01-01

    Human movements are physical processes combining the classical mechanics of the human body moving in space and the biomechanics of the muscles generating the forces acting on the body under sophisticated sensory-motor control. One way to characterize movement performance is through measures of energy efficiency that relate the mechanical energy of the body and metabolic energy expended by the muscles. We expect the practical utility of such measures to be greater when human subjects execute m...

  20. Short and long-term energy intake patterns and their implications for human body weight regulation.

    Science.gov (United States)

    Chow, Carson C; Hall, Kevin D

    2014-07-01

    Adults consume millions of kilocalories over the course of a few years, but the typical weight gain amounts to only a few thousand kilocalories of stored energy. Furthermore, food intake is highly variable from day to day and yet body weight is remarkably stable. These facts have been used as evidence to support the hypothesis that human body weight is regulated by active control of food intake operating on both short and long time scales. Here, we demonstrate that active control of human food intake on short time scales is not required for body weight stability and that the current evidence for long term control of food intake is equivocal. To provide more data on this issue, we emphasize the urgent need for developing new methods for accurately measuring energy intake changes over long time scales. We propose that repeated body weight measurements can be used along with mathematical modeling to calculate long-term changes in energy intake and thereby quantify adherence to a diet intervention and provide dynamic feedback to individuals that seek to control their body weight.

  1. Biological Systems, Energy Sources, and Biology Teaching. Biology and Human Welfare.

    Science.gov (United States)

    Tribe, Michael; Pritchard, Alan J.

    This five-chapter document (part of a series on biology and human welfare) focuses on biological systems as energy sources and on the teaching of this subject area. Chapter 1 discusses various topics related to energy and ecology, including biomass, photosynthesis and world energy balances, energy flow through ecosystems, and others. Chapter 2…

  2. Solar Energy Education. Humanities: activities and teacher's guide. Field test edition

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    Activities are outlined to introduce students to information on solar energy while performing ordinary classroom work. In this teaching manual solar energy is integrated with the humanities. The activities include such things as stories, newspapers, writing assignments, and art and musical presentations all filled with energy related terms. An energy glossary is provided. (BCS)

  3. Autologous Germline Mitochondrial Energy Transfer (AUGMENT) in Human Assisted Reproduction.

    Science.gov (United States)

    Woods, Dori C; Tilly, Jonathan L

    2015-11-01

    Ovarian aging is characterized by a decline in both the total number and overall quality of oocytes, the latter of which has been experimentally tied to mitochondrial dysfunction. Clinical studies in the late 1990s demonstrated that transfer of cytoplasm aspirated from eggs of young female donors into eggs of infertile women at the time of intracytoplasmic sperm injection improved pregnancy success rates. However, donor mitochondria were identified in offspring, and the United States Food and Drug Administration raised questions about delivery of foreign genetic material into human eggs at the time of fertilization. Accordingly, heterologous cytoplasmic transfer, while promising, was in effect shut down as a clinical protocol. The recent discovery of adult oogonial (oocyte-generating) stem cells in mice, and subsequently in women, has since re-opened the prospects of delivering a rich source of pristine and patient-matched germline mitochondria to boost egg health and embryonic developmental potential without the need for young donor eggs to obtain cytoplasm. Herein we overview the science behind this new protocol, which has been patented and termed autologous germline mitochondrial energy transfer, and its use to date in clinical studies for improving pregnancy success in women with a prior history of assisted reproduction failure.

  4. The achievement of sustainable mobility requires the co-existence of numerous energy carriers

    Energy Technology Data Exchange (ETDEWEB)

    Gilpin, Geoffrey; Holden, Erling

    2010-07-01

    Full text: Recent discussions concerning the decarbonisation of the transport sector facilitated by a transition from fossil fuel based transport to a more environmentally benign form of sustainable mobility tend to oversimplify the situation by suggesting a hierarchical evolution of alternative transport fuels. This is highlighted by the linear segregation of biofuel research and development into generations, now standing at current 1st generation-, through to proposed 4th generation biofuels, and with the assumption that hydrogen and electric based modes of transportation will eventually exclude, or greatly minimize, the need for other alternatives in the future. This view of the evolution of future transport fuels is counterproductive to the philosophy of industrial ecology, and its overlying goal of achieving sustainability. Through a review of relevant literature resources the field of industrial ecology and the concept of sustainable mobility is discussed. The criteria by which the sustainability of proposed alternative energy carriers is presented, and the application and validity of developed life-cycle-assessment methodology is reviewed, and argued for as the best available means by which to evaluate existing and proposed energy carriers. A brief review is then presented for the potential of, and limiting factors to current and proposed alternative transport fuels, and thereby clarifies the necessity of adopting a more relaxed view towards the future of sustainable transport fuels. The term 'fuel mosaic' is introduced to describe this future scenario in which fossil fuels co-exist alongside hydrogen, electricity, and biofuels as energy carriers. The variety of energy carriers is required by the presence of varied transport applications, technologies, and their limited factors of production. With this knowledge and the lack of realistic alternative technologies or modes of transportation, and coupled with the expected increase in demand for these

  5. Human CD4+ T cells require exogenous cystine for glutathione and DNA synthesis.

    Science.gov (United States)

    Levring, Trine B; Kongsbak, Martin; Rode, Anna K O; Woetmann, Anders; Ødum, Niels; Bonefeld, Charlotte Menné; Geisler, Carsten

    2015-09-08

    Adaptive immune responses require activation and expansion of antigen-specific T cells. Whereas early T cell activation is independent of exogenous cystine (Cys2), T cell proliferation is dependent of Cys2. However, the exact roles of Cys2 in T cell proliferation still need to be determined. The aim of this study was to elucidate why activated human T cells require exogenous Cys2 in order to proliferate. We activated purified naïve human CD4+ T cells and found that glutathione (GSH) levels and DNA synthesis were dependent on Cys2 and increased in parallel with increasing concentrations of Cys2. Vice-versa, the GSH synthesis inhibitor L-buthionine-sulfoximine (BSO) and inhibition of Cys2 uptake with glutamate inhibited GSH and DNA synthesis in parallel. We further found that thioredoxin (Trx) can partly substitute for GSH during DNA synthesis. Finally, we show that GSH or Trx is required for the activity of ribonucleotide reductase (RNR), the enzyme responsible for generation of the deoxyribonucleotide DNA building blocks. In conclusion, we show that activated human T cells require exogenous Cys2 to proliferate and that this is partly explained by the fact that Cys2 is required for production of GSH, which in turn is required for optimal RNR-mediated deoxyribonucleotide synthesis and DNA replication.

  6. LongTerm Energy Efficiency Analysis Requires Solid Energy Statistics: The case of the German Basic Chemical Industry

    NARCIS (Netherlands)

    Saygin, D.; Worrell, E.; Tam, C.; Trudeau, N.; Gielen, D.J.; Weiss, M.; Patel, M.K.

    2012-01-01

    Analyzing the chemical industry’s energy use is challenging because of the sector’s complexity and the prevailing uncertainty in energy use and production data. We develop an advanced bottom-up model (PIE-Plus) which encompasses the energy use of the 139 most important chemical processes. We apply t

  7. Development of a global electricity supply model and investigation of electricity supply by renewable energies with a focus on energy storage requirements for Europe

    Energy Technology Data Exchange (ETDEWEB)

    Troendle, Tobias Wolfgang

    2014-12-12

    Electricity supply at present requires about 38% of the global primary energy demand and it is likely to rise further in the coming decades. Facing major problems, such as limited resources of fuels and an ongoing anthropogenic climate change, a sustainable electricity supply based on renewable energies is absolutely vital. Wind and solar power will play an extensive role in future supplies but require energy storage capacities to meet electricity demand. To investigate the relationship of power plant mix and required energy storage capacity, a computer model based on global weather data has been developed to enable the simulation of electricity supply scenarios by up to ten different power plant types for various regions. The focus of the investigation has been on the energy storage requirements of an electricity supply for Europe by wind and solar power. The minimum required energy storage capacity for a totally weather dependent electricity supply occurs at a ratio of 30% wind and 70% photovoltaic (PV) power plant capacity installed. Thus, the required energy storage capacity rises from a transition of to-day's electricity supply to the afore-mentioned 100% renewable wind and PV scenario exponentially to about 150 TWh (3.8% of the annual electricity demand). The installation of additional excess wind and PV power plant capacity was seen to be an efficient way to reduce the required energy storage. Already 10% excess capacity lead to a reduction by 50% of the required storage capacity. To use different storage technologies in an optimised way in terms of storage capacity and efficiency, the storage tasks can be separated into a daily and a seasonal usage. While the seasonal storage capacity has to be about two orders of magnitude larger than the required capacity of the storage for the daily cycle, the sum of stored energy during one year is almost equal for the long and short time storage. In summary, an electricity supply by wind and PV power was shown to

  8. Cost optimal building performance requirements. Calculation methodology for reporting on national energy performance requirements on the basis of cost optimality within the framework of the EPBD

    Energy Technology Data Exchange (ETDEWEB)

    Boermans, T.; Bettgenhaeuser, K.; Hermelink, A.; Schimschar, S. [Ecofys, Utrecht (Netherlands)

    2011-05-15

    On the European level, the principles for the requirements for the energy performance of buildings are set by the Energy Performance of Buildings Directive (EPBD). Dating from December 2002, the EPBD has set a common framework from which the individual Member States in the EU developed or adapted their individual national regulations. The EPBD in 2008 and 2009 underwent a recast procedure, with final political agreement having been reached in November 2009. The new Directive was then formally adopted on May 19, 2010. Among other clarifications and new provisions, the EPBD recast introduces a benchmarking mechanism for national energy performance requirements for the purpose of determining cost-optimal levels to be used by Member States for comparing and setting these requirements. The previous EPBD set out a general framework to assess the energy performance of buildings and required Member States to define maximum values for energy delivered to meet the energy demand associated with the standardised use of the building. However it did not contain requirements or guidance related to the ambition level of such requirements. As a consequence, building regulations in the various Member States have been developed by the use of different approaches (influenced by different building traditions, political processes and individual market conditions) and resulted in different ambition levels where in many cases cost optimality principles could justify higher ambitions. The EPBD recast now requests that Member States shall ensure that minimum energy performance requirements for buildings are set 'with a view to achieving cost-optimal levels'. The cost optimum level shall be calculated in accordance with a comparative methodology. The objective of this report is to contribute to the ongoing discussion in Europe around the details of such a methodology by describing possible details on how to calculate cost optimal levels and pointing towards important factors and

  9. Energy expenditure in the etiology of human obesity: spendthrift and thrifty metabolic phenotypes and energy-sensing mechanisms.

    Science.gov (United States)

    Piaggi, P; Vinales, K L; Basolo, A; Santini, F; Krakoff, J

    2017-07-24

    The pathogenesis of human obesity is the result of dysregulation of the reciprocal relationship between food intake and energy expenditure (EE), which influences daily energy balance and ultimately leads to weight gain. According to principles of energy homeostasis, a relatively lower EE in a setting of energy balance may lead to weight gain; however, results from different study groups are contradictory and indicate a complex interaction between EE and food intake which may differentially influence weight change in humans. Recently, studies evaluating the adaptive response of one component to perturbations of the other component of energy balance have revealed both the existence of differing metabolic phenotypes ("spendthrift" and "thrifty") resulting from overeating or underfeeding, as well as energy-sensing mechanisms linking EE to food intake, which might explain the propensity of an individual to weight gain. The purpose of this review is to debate the role that human EE plays on body weight regulation and to discuss the physiologic mechanisms linking EE and food intake. An increased understanding of the complex interplay between human metabolism and food consumption may provide insight into pathophysiologic mechanisms underlying weight gain, which may eventually lead to prevention and better treatment of human obesity.

  10. Competencies Required of Human Resource Professionals in the Government Contracting Industry

    Science.gov (United States)

    Boyer, Dawn Denise

    2013-01-01

    The purpose of this study was to determine if a unique set of Knowledge, Skills, and Abilities (KSAs) were required of Human Resource Practitioners (HRPs) in federal-level Government Contracting Companies (GCC) in the United States. Study results identified additional sets of HR-related KSAs to perform with minimum competency within a…

  11. Functional Mobility Testing: A Novel Method to Establish Human System Interface Design Requirements

    Science.gov (United States)

    England, Scott A.; Benson, Elizabeth A.; Rajulu, Sudhakar

    2008-01-01

    Across all fields of human-system interface design it is vital to posses a sound methodology dictating the constraints on the system based on the capabilities of the human user. These limitations may be based on strength, mobility, dexterity, cognitive ability, etc. and combinations thereof. Data collected in an isolated environment to determine, for example, maximal strength or maximal range of motion would indeed be adequate for establishing not-to-exceed type design limitations, however these restraints on the system may be excessive over what is basally needed. Resources may potentially be saved by having a technique to determine the minimum measurements a system must accommodate. This paper specifically deals with the creation of a novel methodology for establishing mobility requirements for a new generation of space suit design concepts. Historically, the Space Shuttle and the International Space Station vehicle and space hardware design requirements documents such as the Man-Systems Integration Standards and International Space Station Flight Crew Integration Standard explicitly stated that the designers should strive to provide the maximum joint range of motion capabilities exhibited by a minimally clothed human subject. In the course of developing the Human-Systems Integration Requirements (HSIR) for the new space exploration initiative (Constellation), an effort was made to redefine the mobility requirements in the interest of safety and cost. Systems designed for manned space exploration can receive compounded gains from simplified designs that are both initially less expensive to produce and lighter, thereby, cheaper to launch.

  12. Effects of diet forage proportion on maintenance energy requirement and the efficiency of metabolizable energy use for lactation by lactating dairy cows.

    Science.gov (United States)

    Dong, L F; Ferris, C P; McDowell, D A; Yan, T

    2015-12-01

    The objective of the present study was to examine the effect of dietary forage proportion (FP) on metabolizable energy (ME) requirement for maintenance (MEm) and the efficiency of ME use for lactation (kl) in lactating dairy cows. Data used were derived from 32 calorimetric chamber experiments undertaken at our institute between 1992 and 2010, including data from 818 Holstein-Friesian cows (HF), 50 Norwegian Red cows, and 62 crossbred cows (Jersey × HF or Norwegian Red × HF). Animals were offered forage-only rations (n=66) or forage and concentrate rations (n=864) with FP ranging from 18 to 100% (dry matter basis). The effect of FP was evaluated by dividing the whole data set into 4 groups according to the FP ranges, categorized as FP energy losses from inefficiencies of ME use for lactation, energy retention and pregnancy, and kl was obtained from milk energy output adjusted to zero energy balance (El(0)) divided by ME available for production. Increasing FP significantly reduced ME intake and milk energy output, although the differences between the 2 low FP groups were not significant. However, increasing FP significantly increased the ratio of heat production over ME intake and MEm (MJ/kg(0.75)), with the exception that the increases did not reach significance in heat production/ME intake between FP energy requirement for maintenance significantly increased with increasing FP. However, the increase between the 2 high FP groups did not research significance. It is concluded that increasing diet FP had no effects on kl but significantly increased maintenance energy requirement (MJ/kg(0.75)). These results indicate that using the current energy feeding systems to ration dairy cows managed under low input systems may underestimate their nutrient requirements, because the majority of feeding systems adopted globally do not differentiate the maintenance energy requirements between low and high forage input systems.

  13. Dissecting genetic requirements of human breast tumorigenesis in a tissue transgenic model of human breast cancer in mice.

    Science.gov (United States)

    Wu, Min; Jung, Lina; Cooper, Adrian B; Fleet, Christina; Chen, Lihao; Breault, Lyne; Clark, Kimberly; Cai, Zuhua; Vincent, Sylvie; Bottega, Steve; Shen, Qiong; Richardson, Andrea; Bosenburg, Marcus; Naber, Stephen P; DePinho, Ronald A; Kuperwasser, Charlotte; Robinson, Murray O

    2009-04-28

    Breast cancer development is a complex pathobiological process involving sequential genetic alterations in normal epithelial cells that results in uncontrolled growth in a permissive microenvironment. Accordingly, physiologically relevant models of human breast cancer that recapitulate these events are needed to study cancer biology and evaluate therapeutic agents. Here, we report the generation and utilization of the human breast cancer in mouse (HIM) model, which is composed of genetically engineered primary human breast epithelial organoids and activated human breast stromal cells. By using this approach, we have defined key genetic events required to drive the development of human preneoplastic lesions as well as invasive adenocarcinomas that are histologically similar to those in patients. Tumor development in the HIM model proceeds through defined histological stages of hyperplasia, DCIS to invasive carcinoma. Moreover, HIM tumors display characteristic responses to targeted therapies, such as HER2 inhibitors, further validating the utility of these models in preclinical compound testing. The HIM model is an experimentally tractable human in vivo system that holds great potential for advancing our basic understanding of cancer biology and for the discovery and testing of targeted therapies.

  14. Determining the required accuracy of LST products for estimating surface energy fluxes

    Science.gov (United States)

    Pinheiro, A. C.; Reichle, R.; Sujay, K.; Arsenault, K.; Privette, J. L.; Yu, Y.

    2006-12-01

    Land Surface Temperature (LST) is an important parameter to assess the energy state of a surface. Synoptic satellite observations of LST must be used when attempting to estimate fluxes over large spatial scales. Due to the close coupling between LST, root level water availability, and mass and energy fluxes at the surface, LST is particularly useful over agricultural areas to help determine crop water demands and facilitate water management decisions (e.g., irrigation). Further, LST can be assimilated into land surface models to help improve estimates of latent and sensible heat fluxes. However, the accuracy of LST products and its impact on surface flux estimation is not well known. In this study, we quantify the uncertainty limits in LST products for accurately estimating latent heat fluxes over agricultural fields in the Rio Grande River basin of central New Mexico. We use the Community Land Model (CLM) within the Land Information Systems (LIS), and adopt an Ensemble Kalman Filter approach to assimilate the LST fields into the model. We evaluate the LST and assimilation performance against field measurements of evapotranspiration collected at two eddy-covariance towers in semi-arid cropland areas. Our results will help clarify sensor and LST product requirements for future remote sensing systems.

  15. Exigências nutricionais de zebuínos: energia Nutritional requirements of zebu cattle: energy

    Directory of Open Access Journals (Sweden)

    Pedro Veiga Rodrigues Paulino

    2004-06-01

    Full Text Available Com o objetivo de determinar as exigências de energia e as eficiências de utilização da energia metabolizável para ganho de peso e mantença de zebuínos, foi desenvolvido um experimento envolvendo 19 novilhos anelorados, com peso vivo médio inicial de 270 kg. Quatro animais foram abatidos ao início do experimento, para servirem de referência para estudos posteriores, três foram alimentados ao nível de mantença e os 12 restantes foram alocados em delineamento inteiramente casualizado, com três tratamentos: 5, 35 e 65% de concentrado na base da matéria seca total. O volumoso foi constituído de pré-secado de capim-braquiária (Brachiaria brizantha e de capim-tifton 85 (Cynodon sp.. As dietas foram isonitrogenadas e os animais foram alimentados ad libitum. A exigência líquida de energia para mantença (ELm foi estimada como o anti-log do intercepto da equação obtida pela regressão linear entre o logaritmo da produção de calor (PC e o consumo de energia metabolizável (CEM, bem como pelo coeficiente "a" da equação de regressão exponencial entre a PC e o CEM dos animais do tratamento com 35% de concentrado e os do grupo mantença. As quantidades de energia e gordura no ganho elevaram-se com o aumento do peso vivo (PV dos animais. O teste de identidade dos modelos de regressão demonstrou não haver diferenças entre os tratamentos. O requisito energético diário para mantença foi de 68,60 kcal/PV0,75. A k m estimada foi de 0,66 e as k g calculadas foram de 0,26; 0,41 e 0,46, respectivamente, para concentrações de EM de 2,31; 2,47 e 2,62 Mcal/kg de MS, correspondentes aos teores de 5, 35 e 65% de concentrado na dieta. Os requisitos diários de EM e NDT para mantença de um animal de 400 kg de PV foram de 9,30 Mcal e 2,57 kg, respectivamente.A trial involving nineteen zebu steers with initial live weight of 270 kg were conducted with the objective of determining their energy requirements and the efficiency of utilization of

  16. Human health-related externalities in energy system modelling the case of the Danish heat and power sector

    DEFF Research Database (Denmark)

    Zvingilaite, Erika

    2011-01-01

    This paper discusses methodology of energy system modelling when reduction of local externalities, such as damage to the human health from energy production-related air pollution, is in focus. Ideally, the local energy externalities should be analysed by adopting the impact pathway approach...... of ExternE study, and following the pollutants from their release to the personal uptake and resulting health effects. This would require inclusion of air pollution modelling and monetary valuation of the impacts into an energy system optimisation process. However, this approach involves a complex study...... and power sector verifies that it is cheaper for the society to include externalities in the planning of an energy system than to pay for the resulting damages later. Total health costs decrease by around 18% and total system costs decrease by nearly 4% when health externalities are included...

  17. Quantum dynamics study of energy requirement on reactivity for the HBr + OH reaction with a negative-energy barrier

    Science.gov (United States)

    Wang, Yuping; Li, Yida; Wang, Dunyou

    2017-01-01

    A time-dependent, quantum reaction dynamics approach in full dimensional, six degrees of freedom was carried out to study the energy requirement on reactivity for the HBr + OH reaction with an early, negative energy barrier. The calculation shows both the HBr and OH vibrational excitations enhance the reactivity. However, even this reaction has a negative energy barrier, the calculation shows not all forms of energy are equally effective in promoting the reactivity. On the basis of equal amount of total energy, the vibrational energies of both the HBr and OH are more effective in enhancing the reactivity than the translational energy, whereas the rotational excitations of both the HBr and OH hinder the reactivity. The rate constants were also calculated for the temperature range between 5 to 500 K. The quantal rate constants have a better slope agreement with the experimental data than quasi-classical trajectory results.

  18. Cutting edge: Human regulatory T cells require IL-35 to mediate suppression and infectious tolerance.

    Science.gov (United States)

    Chaturvedi, Vandana; Collison, Lauren W; Guy, Clifford S; Workman, Creg J; Vignali, Dario A A

    2011-06-15

    Human regulatory T cells (T(reg)) are essential for the maintenance of immune tolerance. However, the mechanisms they use to mediate suppression remain controversial. Although IL-35 has been shown to play an important role in T(reg)-mediated suppression in mice, recent studies have questioned its relevance in human T(reg). In this study, we show that human T(reg) express and require IL-35 for maximal suppressive capacity. Substantial upregulation of EBI3 and IL12A, but not IL10 and TGFB, was observed in activated human T(reg) compared with conventional T cells (T(conv)). Contact-independent T(reg)-mediated suppression was IL-35 dependent and did not require IL-10 or TGF-β. Lastly, human T(reg)-mediated suppression led to the conversion of the suppressed T(conv) into iTr35 cells, an IL-35-induced T(reg) population, in an IL-35-dependent manner. Thus, IL-35 contributes to human T(reg)-mediated suppression, and its conversion of suppressed target T(conv) into IL-35-induced T(reg) may contribute to infectious tolerance.

  19. The Nuremberg Code subverts human health and safety by requiring animal modeling

    Science.gov (United States)

    2012-01-01

    Background The requirement that animals be used in research and testing in order to protect humans was formalized in the Nuremberg Code and subsequent national and international laws, codes, and declarations. Discussion We review the history of these requirements and contrast what was known via science about animal models then with what is known now. We further analyze the predictive value of animal models when used as test subjects for human response to drugs and disease. We explore the use of animals for models in toxicity testing as an example of the problem with using animal models. Summary We conclude that the requirements for animal testing found in the Nuremberg Code were based on scientifically outdated principles, compromised by people with a vested interest in animal experimentation, serve no useful function, increase the cost of drug development, and prevent otherwise safe and efficacious drugs and therapies from being implemented. PMID:22769234

  20. The Nuremberg Code subverts human health and safety by requiring animal modeling

    Directory of Open Access Journals (Sweden)

    Greek Ray

    2012-07-01

    Full Text Available Abstract Background The requirement that animals be used in research and testing in order to protect humans was formalized in the Nuremberg Code and subsequent national and international laws, codes, and declarations. Discussion We review the history of these requirements and contrast what was known via science about animal models then with what is known now. We further analyze the predictive value of animal models when used as test subjects for human response to drugs and disease. We explore the use of animals for models in toxicity testing as an example of the problem with using animal models. Summary We conclude that the requirements for animal testing found in the Nuremberg Code were based on scientifically outdated principles, compromised by people with a vested interest in animal experimentation, serve no useful function, increase the cost of drug development, and prevent otherwise safe and efficacious drugs and therapies from being implemented.

  1. Science Requirements and Conceptual Design for a Polarized Medium Energy Electron-Ion Collider at Jlab

    Energy Technology Data Exchange (ETDEWEB)

    Abeyratne, S; Ahmed, S; Barber, D; Bisognano, J; Bogacz, A; Castilla, A; Chevtsov, P; Corneliussen, S; Deconinck, W; Degtiarenko, P; Delayen, J; Derbenev, Ya; DeSilva, S; Douglas, D; Dudnikov, V; Ent, R; Erdelyi, B; Evtushenko, P; Fujii, Yu; Filatov, Yury; Gaskell, D; Geng, R; Guzey, V; Horn, T; Hutton, A; Hyde, C; Johnson, R; Kim, Y; Klein, F; Kondratenko, A; Kondratenko, M; Krafft, G; Li, R; Lin, F; Manikonda, S; Marhauser, F; McKeown, R; Morozov, V; Dadel-Turonski, P; Nissen, E; Ostroumov, P; Pivi, M; Pilat, F; Poelker, M; Prokudin, A; Rimmer, R; Satogata, T; Sayed, H; Spata, M; Sullivan, M; Tennant, C; Terzic, B; Tiefenback, M; Wang, M; Wang, S; Weiss, C; Yunn, B

    2012-08-01

    beginning, the design studies at Jefferson Lab have focused on achieving high collider performance, particularly ultrahigh luminosities up to 10{sup 34} cm{sup -2}s{sup -1} per detector with large acceptance, while maintaining high polarization for both the electron and light-ion beams. These are the two key performance requirements of a future electron-ion collider facility as articulated by the NSAC Long Range Plan. In MEIC, a new ion complex is designed specifically to deliver ion beams that match the high bunch repetition and highly polarized electron beam from CEBAF. During the last two years, both development of the science case and optimization of the machine design point toward a medium-energy electron-ion collider as the topmost goal for Jefferson Lab. The MEIC, with relatively compact collider rings, can deliver a luminosity above 10{sup 34} cm{sup -2}s{sup -1} at a center-of-mass energy up to 65 GeV. It offers an electron energy up to 11 GeV, a proton energy up to 100 GeV, and corresponding energies per nucleon for heavy ions with the same magnetic rigidity. This design choice balances the scope of the science program, collider capabilities, accelerator technology innovation, and total project cost. An energy upgrade could be implemented in the future by adding two large collider rings housed in another large tunnel to push the center-of-mass energy up to or exceeding 140 GeV. After careful consideration of an alternative electron energy recovery linac on ion storage ring approach, a ring-ring collider scenario at high bunch repetition frequency was found to offer fully competitive performance while eliminating the uncertainties of challenging R&D on ampere-class polarized electron sources and many-pass energy-recovery linacs (ERLs). The essential new elements of an MEIC facility at Jefferson Lab are an electron storage ring and an entirely new, modern ion acceleration and storage complex. For the high-current electron collider ring, the upgraded 12 GeV CEBAF SRF

  2. Science Requirements and Conceptual Design for a Polarized Medium Energy Electron-Ion Collider at Jlab

    Energy Technology Data Exchange (ETDEWEB)

    Abeyratne, S; Ahmed, S; Barber, D; Bisognano, J; Bogacz, A; Castilla, A; Chevtsov, P; Corneliussen, S; Deconinck, W; Degtiarenko, P; Delayen, J; Derbenev, Ya; DeSilva, S; Douglas, D; Dudnikov, V; Ent, R; Erdelyi, B; Evtushenko, P; Fujii, Yu; Filatov, Yury; Gaskell, D; Geng, R; Guzey, V; Horn, T; Hutton, A; Hyde, C; Johnson, R; Kim, Y; Klein, F; Kondratenko, A; Kondratenko, M; Krafft, G; Li, R; Lin, F; Manikonda, S; Marhauser, F; McKeown, R; Morozov, V; Dadel-Turonski, P; Nissen, E; Ostroumov, P; Pivi, M; Pilat, F; Poelker, M; Prokudin, A; Rimmer, R; Satogata, T; Sayed, H; Spata, M; Sullivan, M; Tennant, C; Terzic, B; Tiefenback, M; Wang, M; Wang, S; Weiss, C; Yunn, B

    2012-08-01

    beginning, the design studies at Jefferson Lab have focused on achieving high collider performance, particularly ultrahigh luminosities up to 10{sup 34} cm{sup -2}s{sup -1} per detector with large acceptance, while maintaining high polarization for both the electron and light-ion beams. These are the two key performance requirements of a future electron-ion collider facility as articulated by the NSAC Long Range Plan. In MEIC, a new ion complex is designed specifically to deliver ion beams that match the high bunch repetition and highly polarized electron beam from CEBAF. During the last two years, both development of the science case and optimization of the machine design point toward a medium-energy electron-ion collider as the topmost goal for Jefferson Lab. The MEIC, with relatively compact collider rings, can deliver a luminosity above 10{sup 34} cm{sup -2}s{sup -1} at a center-of-mass energy up to 65 GeV. It offers an electron energy up to 11 GeV, a proton energy up to 100 GeV, and corresponding energies per nucleon for heavy ions with the same magnetic rigidity. This design choice balances the scope of the science program, collider capabilities, accelerator technology innovation, and total project cost. An energy upgrade could be implemented in the future by adding two large collider rings housed in another large tunnel to push the center-of-mass energy up to or exceeding 140 GeV. After careful consideration of an alternative electron energy recovery linac on ion storage ring approach, a ring-ring collider scenario at high bunch repetition frequency was found to offer fully competitive performance while eliminating the uncertainties of challenging R&D on ampere-class polarized electron sources and many-pass energy-recovery linacs (ERLs). The essential new elements of an MEIC facility at Jefferson Lab are an electron storage ring and an entirely new, modern ion acceleration and storage complex. For the high-current electron collider ring, the upgraded 12 GeV CEBAF SRF

  3. Cost-optimal levels for energy performance requirements:The Concerted Action's input to the Framework Methodology

    OpenAIRE

    Thomsen, Kirsten Engelund; Aggerholm, Søren; Kluttig-Erhorn, Heike; Erhorn, Hans; Poel, Bart; Hitchin, Roger

    2011-01-01

    The CA conducted a study on experiences and challenges for setting cost optimal levels for energy performance requirements. The results were used as input by the EU Commission in their work of establishing the Regulation on a comparative methodology framework for calculating cost optimal levels of minimum energy performance requirements. In addition to the summary report released in August 2011, the full detailed report on this study is now also made available, just as the EC is about to publ...

  4. Model of an aquaponic system for minimised water, energy and nitrogen requirements.

    Science.gov (United States)

    Reyes Lastiri, D; Slinkert, T; Cappon, H J; Baganz, D; Staaks, G; Keesman, K J

    2016-01-01

    Water and nutrient savings can be established by coupling water streams between interacting processes. Wastewater from production processes contains nutrients like nitrogen (N), which can and should be recycled in order to meet future regulatory discharge demands. Optimisation of interacting water systems is a complex task. An effective way of understanding, analysing and optimising such systems is by applying mathematical models. The present modelling work aims at supporting the design of a nearly emission-free aquaculture and hydroponic system (aquaponics), thus contributing to sustainable production and to food security for the 21st century. Based on the model, a system that couples 40 m(3) fish tanks and a hydroponic system of 1,000 m(2) can produce 5 tons of tilapia and 75 tons of tomato yearly. The system requires energy to condense and recover evaporated water, for lighting and heating, adding up to 1.3 GJ/m(2) every year. In the suggested configuration, the fish can provide about 26% of the N required in a plant cycle. A coupling strategy that sends water from the fish to the plants in amounts proportional to the fish feed input, reduces the standard deviation of the NO3(-) level in the fish cycle by 35%.

  5. Integrated Water Resource Management and Energy Requirements for Water Supply in the Copiapó River Basin, Chile

    Directory of Open Access Journals (Sweden)

    Francisco Suárez

    2014-08-01

    Full Text Available Population and industry growth in dry climates are fully tied to significant increase in water and energy demands. Because water affects many economic, social and environmental aspects, an interdisciplinary approach is needed to solve current and future water scarcity problems, and to minimize energy requirements in water production. Such a task requires integrated water modeling tools able to couple surface water and groundwater, which allow for managing complex basins where multiple stakeholders and water users face an intense competition for limited freshwater resources. This work develops an integrated water resource management model to investigate the water-energy nexus in reducing water stress in the Copiapó River basin, an arid, highly vulnerable basin in northern Chile. The model was utilized to characterize groundwater and surface water resources, and water demand and uses. Different management scenarios were evaluated to estimate future resource availability, and compared in terms of energy requirements and costs for desalinating seawater to eliminate the corresponding water deficit. Results show a basin facing a very complex future unless measures are adopted. When a 30% uniform reduction of water consumption is achieved, 70 GWh over the next 30 years are required to provide the energy needed to increase the available water through seawater desalination. In arid basins, this energy could be supplied by solar energy, thus addressing water shortage problems through integrated water resource management combined with new technologies of water production driven by renewable energy sources.

  6. Nonhomeostatic control of human appetite and physical activity in regulation of energy balance.

    Science.gov (United States)

    Borer, Katarina T

    2010-07-01

    Ghrelin and leptin, putative controllers of human appetite, have no effect on human meal-to-meal appetite but respond to variations in energy availability. Nonhomeostatic characteristics of appetite and spontaneous activity stem from inhibition by leptin and ghrelin of brain reward circuit that is responsive to energy deficit, but refractory in obesity, and from the operation of a meal-timing circadian clock.

  7. Plasma bile acids are not associated with energy metabolism in humans

    NARCIS (Netherlands)

    Brufau, Gemma; Bahr, Matthias J.; Staels, Bart; Claudel, Thierry; Ockenga, Johann; Boker, Klaus H. W.; Murphy, Elizabeth J.; Prado, Kris; Stellaard, Frans; Manns, Michael P.; Kuipers, Folkert; Tietge, Uwe J. F.

    2010-01-01

    Bile acids (BA) have recently been shown to increase energy expenditure in mice, but this concept has not been tested in humans. Therefore, we investigated the relationship between plasma BA levels and energy expenditure in humans. Type 2 diabetic (T2DM) patients (n = 12) and gender, age and BMI-mat

  8. Demand-driven energy requirement of world economy 2007: A multi-region input-output network simulation

    Science.gov (United States)

    Chen, Zhan-Ming; Chen, G. Q.

    2013-07-01

    This study presents a network simulation of the global embodied energy flows in 2007 based on a multi-region input-output model. The world economy is portrayed as a 6384-node network and the energy interactions between any two nodes are calculated and analyzed. According to the results, about 70% of the world's direct energy input is invested in resource, heavy manufacture, and transportation sectors which provide only 30% of the embodied energy to satisfy final demand. By contrast, non-transportation services sectors contribute to 24% of the world's demand-driven energy requirement with only 6% of the direct energy input. Commodity trade is shown to be an important alternative to fuel trade in redistributing energy, as international commodity flows embody 1.74E + 20 J of energy in magnitude up to 89% of the traded fuels. China is the largest embodied energy exporter with a net export of 3.26E + 19 J, in contrast to the United States as the largest importer with a net import of 2.50E + 19 J. The recent economic fluctuations following the financial crisis accelerate the relative expansions of energy requirement by developing countries, as a consequence China will take over the place of the United States as the world's top demand-driven energy consumer in 2022 and India will become the third largest in 2015.

  9. Human rights in the energy sector: where are we going?

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Jim [KBC Advanced Technologies, Surrey (United Kingdom)

    2012-07-01

    There is considerable guidance and tools to avoid and remediate adverse Human Rights impacts; Environmental Impact Assessment (EIA), specific Human Right Impact Assessments or stand alone assessments across the whole spectrum of Human Rights. However the oil and gas sector has yet to address Human Rights risks in a comprehensive manner. In 2011 the Special Representative of the Secretary-General issued Guiding Principles (GP) to implement the United Nations 'Protect, Respect and Remedy' Framework. A survey of Human Rights performance against GP16 by the largest International Oil Companies (IOCs) and National Oil Companies (NOCs) shows a dichotomy with most (93%) of IOCs having a Human Rights Policy, approved at the highest level and available via the www to the general public (compliant with GP16) whilst 27% of NOCs have a Policy, of which, 9% are GP16 compliant. When service companies are included, only 23% are GP16 compliant. Only 8% provide Human Rights training. Human Rights in 41% of new projects are assessed via an EIA process, 18% via a specific Human Rights process, and 41% do not focus on Human Rights at all. Most companies do not have a Human Rights grievance mechanism. Whilst the IOCs are performing well the rest of the oil and gas sector, including the NOCs and service companies, are under-performing. The apparent reliance on the EIA process to Protect, Respect and Remedy Human Rights may be inadequate as the delivery of EIA is: still heavily biased toward environment compared to social and health impacts; they are time consuming and the Human Rights landscape can change during the EIA process; and the EIA disclosure process may expose vulnerable people to abuse. The oil and gas sector needs to address the record of poor compliance and develop and integrate some of the widely available Human rights tools. (author)

  10. Why EU renewable energy figures are misleading: Europe requires 150% renewable energy to become fossil-free

    NARCIS (Netherlands)

    Visser, Martien

    2016-01-01

    The EU is confident it will reach its target of 20% renewable energy by 2020. But according to Martien Visser, professor at the Hanze University of Applied Sciences in Groningen (The Netherlands), this 20% is in reality more like 14%. This is because a large part of our energy consumption is simply

  11. Energy consumption in residential building: The effect of appliances and human behaviour

    Science.gov (United States)

    Rahman, K. A.; Hariri, Azian; Leman, A. M.; Yusof, M. Z. M.; Najib, M. N. M.

    2017-04-01

    Electricity is the predominant energy source used in these buildings. Therefore, energy management in residential buildings requires serious attention to ensure the energy consumption in residential building have been managed properly. Currently, the unstable of fuel price give the big impact to electricity price. Due to the issue, consumers require to use electricity more wisely. Using energy efficiently is one of the solution to reduce energy consumption. This paper aims to propose an initiative strategy for energy management system based on an analysis of energy consumption in residential building. The level of energy consumption among the occupants was found by obtaining electricity bills and distributing a questionnaire. A case study was carried out in selected areas in the Southern Zone of Peninsular Malaysia. The results of the study show that energy consumption was significant increased by month and the EEES as one of energy management system was suggested.

  12. Radial glia require PDGFD-PDGFRβ signalling in human but not mouse neocortex.

    Science.gov (United States)

    Lui, Jan H; Nowakowski, Tomasz J; Pollen, Alex A; Javaherian, Ashkan; Kriegstein, Arnold R; Oldham, Michael C

    2014-11-13

    Evolutionary expansion of the human neocortex underlies many of our unique mental abilities. This expansion has been attributed to the increased proliferative potential of radial glia (RG; neural stem cells) and their subventricular dispersion from the periventricular niche during neocortical development. Such adaptations may have evolved through gene expression changes in RG. However, whether or how RG gene expression varies between humans and other species is unknown. Here we show that the transcriptional profiles of human and mouse neocortical RG are broadly conserved during neurogenesis, yet diverge for specific signalling pathways. By analysing differential gene co-expression relationships between the species, we demonstrate that the growth factor PDGFD is specifically expressed by RG in human, but not mouse, corticogenesis. We also show that the expression domain of PDGFRβ, the cognate receptor for PDGFD, is evolutionarily divergent, with high expression in the germinal region of dorsal human neocortex but not in the mouse. Pharmacological inhibition of PDGFD-PDGFRβ signalling in slice culture prevents normal cell cycle progression of neocortical RG in human, but not mouse. Conversely, injection of recombinant PDGFD or ectopic expression of constitutively active PDGFRβ in developing mouse neocortex increases the proportion of RG and their subventricular dispersion. These findings highlight the requirement of PDGFD-PDGFRβ signalling for human neocortical development and suggest that local production of growth factors by RG supports the expanded germinal region and progenitor heterogeneity of species with large brains.

  13. Vitamin D Signaling in the Bovine Immune System: A Model for Understanding Human Vitamin D Requirements

    Directory of Open Access Journals (Sweden)

    Corwin D. Nelson

    2012-03-01

    Full Text Available The endocrine physiology of vitamin D in cattle has been rigorously investigated and has yielded information on vitamin D requirements, endocrine function in health and disease, general metabolism, and maintenance of calcium homeostasis in cattle. These results are relevant to human vitamin D endocrinology. The current debate regarding vitamin D requirements is centered on the requirements for proper intracrine and paracrine vitamin D signaling. Studies in adult and young cattle can provide valuable insight for understanding vitamin D requirements as they relate to innate and adaptive immune responses during infectious disease. In cattle, toll-like receptor recognition activates intracrine and paracrine vitamin D signaling mechanism in the immune system that regulates innate and adaptive immune responses in the presence of adequate 25-hydroxyvitamin D. Furthermore, experiments with mastitis in dairy cattle have provided in vivo evidence for the intracrine vitamin D signaling mechanism in macrophages as well as vitamin D mediated suppression of infection. Epidemiological evidence indicates that circulating concentrations above 32 ng/mL of 25-hydroxyvitamin D are necessary for optimal vitamin D signaling in the immune system, but experimental evidence is lacking for that value. Experiments in cattle can provide that evidence as circulating 25-hydroxyvitamin D concentrations can be experimentally manipulated within ranges that are normal for humans and cattle. Additionally, young and adult cattle can be experimentally infected with bacteria and viruses associated with significant diseases in both cattle and humans. Utilizing the bovine model to further delineate the immunomodulatory role of vitamin D will provide potentially valuable insights into the vitamin D requirements of both humans and cattle, especially as they relate to immune response capacity and infectious disease resistance.

  14. Vitamin D signaling in the bovine immune system: a model for understanding human vitamin D requirements.

    Science.gov (United States)

    Nelson, Corwin D; Reinhardt, Timothy A; Lippolis, John D; Sacco, Randy E; Nonnecke, Brian J

    2012-03-01

    The endocrine physiology of vitamin D in cattle has been rigorously investigated and has yielded information on vitamin D requirements, endocrine function in health and disease, general metabolism, and maintenance of calcium homeostasis in cattle. These results are relevant to human vitamin D endocrinology. The current debate regarding vitamin D requirements is centered on the requirements for proper intracrine and paracrine vitamin D signaling. Studies in adult and young cattle can provide valuable insight for understanding vitamin D requirements as they relate to innate and adaptive immune responses during infectious disease. In cattle, toll-like receptor recognition activates intracrine and paracrine vitamin D signaling mechanism in the immune system that regulates innate and adaptive immune responses in the presence of adequate 25-hydroxyvitamin D. Furthermore, experiments with mastitis in dairy cattle have provided in vivo evidence for the intracrine vitamin D signaling mechanism in macrophages as well as vitamin D mediated suppression of infection. Epidemiological evidence indicates that circulating concentrations above 32 ng/mL of 25-hydroxyvitamin D are necessary for optimal vitamin D signaling in the immune system, but experimental evidence is lacking for that value. Experiments in cattle can provide that evidence as circulating 25-hydroxyvitamin D concentrations can be experimentally manipulated within ranges that are normal for humans and cattle. Additionally, young and adult cattle can be experimentally infected with bacteria and viruses associated with significant diseases in both cattle and humans. Utilizing the bovine model to further delineate the immunomodulatory role of vitamin D will provide potentially valuable insights into the vitamin D requirements of both humans and cattle, especially as they relate to immune response capacity and infectious disease resistance.

  15. Human Capacity Building in Energy Efficiency and Renewable Energy System Maintenance for the Yurok Tribe

    Energy Technology Data Exchange (ETDEWEB)

    Engel, R. A.' Zoellick, J J.

    2007-07-31

    From July 2005 to July 2007, the Schatz Energy Research Center (SERC) assisted the Yurok Tribe in the implementation of a program designed to build the Tribe’s own capacity to improve energy efficiency and maintain and repair renewable energy systems in Tribal homes on the Yurok Reservation. Funding for this effort was provided by the U.S. Department of Energy’s Tribal Program under First Steps grant award #DE-FG36-05GO15166. The program’s centerpiece was a house-by-house needs assessment, in which Tribal staff visited and conducted energy audits at over fifty homes. The visits included assessment of household energy efficiency and condition of existing renewable energy systems. Staff also provided energy education to residents, evaluated potential sites for new household renewable energy systems, and performed minor repairs as needed on renewable energy systems.

  16. Technology and Research Requirements for Combating Human Trafficking: Enhancing Communication, Analysis, Reporting, and Information Sharing

    Energy Technology Data Exchange (ETDEWEB)

    Kreyling, Sean J.; West, Curtis L.; Olson, Jarrod

    2011-03-17

    DHS’ Science & Technology Directorate directed PNNL to conduct an exploratory study on the domain of human trafficking in the Pacific Northwest in order to examine and identify technology and research requirements for enhancing communication, analysis, reporting, and information sharing – activities that directly support efforts to track, identify, deter, and prosecute human trafficking – including identification of potential national threats from smuggling and trafficking networks. This effort was conducted under the Knowledge Management Technologies Portfolio as part of the Integrated Federal, State, and Local/Regional Information Sharing (RISC) and Collaboration Program.

  17. A survey on human behavior towards energy efficiency for office worker in malaysia

    Science.gov (United States)

    Mustafa, N. H.; Husain, M. N.; Abd Aziz, M. Z. A.; Othman, M. A.; Malek, F.

    2014-04-01

    Green environment has become an important topic around the world. This campaign can be realized if everybody understands and shares similar objectives on managing energy in an efficient way. This paper will present and analyse the survey on energy usage by office workers in Malaysia. The survey will focus on the workers in government sector. In social science surveys, it is important to support the tested data for a project. For issues related to human behaviour we must compare with real situations to verify the tested data and the results in energy monitoring system. The energy monitoring system will improve energy usage efficiency for the basic human activities in different situations and environments.

  18. Patterns of Selection of Human Movements IV: Energy Efficiency, Mechanical Advantage, and Asynchronous Arm-Cranking

    OpenAIRE

    Hagler, Stuart

    2017-01-01

    Human movements are physical processes combining the classical mechanics of the human body moving in space and the biomechanics of the muscles generating the forces acting on the body under sophisticated sensory-motor control. The characterization of the performance of human movements is a problem with important applications in clinical and sports research. One way to characterize movement performance is through measures of energy efficiency that relate the mechanical energy of the body and m...

  19. 76 FR 41240 - Agave Energy Company; Notice for Temporary Waiver of Filing and Reporting Requirements

    Science.gov (United States)

    2011-07-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Agave Energy Company; Notice for Temporary Waiver of Filing and Reporting... Procedure, 18 CFR 385.202 (2011), Agave Energy Company (AEC) requests that the Commission grant a...

  20. Methods for Calculating Energy Requirements for Processes in Which a Reactant Is Also a Fuel: Need for Standardization

    Science.gov (United States)

    Sohn, H. Y.; Olivas-Martinez, Miguel

    2014-09-01

    When a process involves both endothermic chemical reactions and heat generation from the combustion of fuels, the choice of endothermic reactions to include in computing the "energy requirement" for the overall process is arbitrary and can be a source of confusion. It is shown that the essential question becomes whether the heat of combustion of a reactant, which can be used as a fuel, should be included in the energy requirement value. It is noted that the choice is a matter of convention, but it is important to clearly state what convention is followed in presenting the results of energy calculations. There is a need to select a standard approach because the presented value of "energy requirement" of a process depends on the choice. This problem is illustrated using the example of ironmaking by different processes including a novel flash ironmaking process under development at the University of Utah. The authors advocate using just the "process energy requirement" as the standard value of the energy requirement for a process in which a reactant is also a fuel.

  1. Offshore Resource Assessment and Design Conditions: A Data Requirements and Gaps Analysis for Offshore Renewable Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, Dennis [National Renewable Energy Lab. (NREL), Golden, CO (United States); Frame, Caitlin [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Gill, Carrie [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Hanson, Howard [Florida Atlantic Univ., Boca Raton, FL (United States); Moriarty, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Powell, Mark [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Shaw, William J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wilczak, Jim [National Oceanic and Atmospheric Administration (NOAA), Washington, DC (United States); Wynne, Jason [Energetics, Columbia, MD (United States)

    2012-03-01

    The offshore renewable energy industry requires accurate meteorological and oceanographic (“metocean”) data for evaluating the energy potential, economic viability, and engineering requirements of offshore renewable energy projects. It is generally recognized that currently available metocean data, instrumentation, and models are not adequate to meet all of the stakeholder needs on a national scale. Conducting wind and wave resource assessments and establishing load design conditions requires both interagency collaboration as well as valuable input from experts in industry and academia. Under the Department of Energy and Department of Interior Memorandum of Understanding, the Resource Assessment and Design Condition initiative supports collaborative national efforts by adding to core atmospheric and marine science knowledge relevant to offshore energy development. Such efforts include a more thorough understanding and data collection of key metocean phenomena such as wind velocity and shear; low-level jets; ocean, tidal, and current velocities; wave characteristics; geotechnical data relating to surface and subsurface characteristics; seasonal and diurnal variations; and the interaction among these conditions. Figure 1 presents a graphical representation of some metocean phenomena that can impact offshore energy systems. This document outlines the metocean observations currently available; those that are not available; and those that require additional temporal-spatial coverage, resolution, or processing for offshore energy in an effort to gather agreed-upon, needed observations.

  2. Human Energy Expenditure and Postural Coordination on the Mechanical Horse.

    Science.gov (United States)

    Baillet, Héloïse; Thouvarecq, Régis; Vérin, Eric; Tourny, Claire; Benguigui, Nicolas; Komar, John; Leroy, David

    2017-01-01

    The authors investigated and compared the energy expenditure and postural coordination of two groups of healthy subjects on a mechanical horse at 4 increasing oscillation frequencies. Energy expenditure was assessed from the oxygen consumption, respiratory quotient, and heart rate values, and postural coordination was characterized by relative phase computations between subjects (elbow, head, trunk) and horse. The results showed that the postural coordination of the riders was better adapted (i.e., maintenance of in-phase and antiphase) than that of the nonriders, but the energy expenditure remains the same. Likewise, we observed an energy system shifting only for nonriders (from aerobic to lactic anaerobic mode). Finally, cross-correlations showed a link between energy expenditure and postural coordination in the riders (i.e., effectiveness).

  3. Detection of Human Impacts by an Adaptive Energy-Based Anisotropic Algorithm

    Directory of Open Access Journals (Sweden)

    Manuel Prado-Velasco

    2013-10-01

    Full Text Available Boosted by health consequences and the cost of falls in the elderly, this work develops and tests a novel algorithm and methodology to detect human impacts that will act as triggers of a two-layer fall monitor. The two main requirements demanded by socio-healthcare providers—unobtrusiveness and reliability—defined the objectives of the research. We have demonstrated that a very agile, adaptive, and energy-based anisotropic algorithm can provide 100% sensitivity and 78% specificity, in the task of detecting impacts under demanding laboratory conditions. The algorithm works together with an unsupervised real-time learning technique that addresses the adaptive capability, and this is also presented. The work demonstrates the robustness and reliability of our new algorithm, which will be the basis of a smart falling monitor. This is shown in this work to underline the relevance of the results.

  4. An Energy Model for Viewing Embodied Human Capital Theory

    Science.gov (United States)

    Kaufman, Neil A.; Geroy, Gary D.

    2007-01-01

    Human capital development is one of the emerging areas of study with regard to social science theory, practice, and research. A relatively new concept, human capital is described in terms of individual knowledge skills and experience. It is currently expressed as a function of education as well as a measure of economic activity. Little theory…

  5. An Energy Model for Viewing Embodied Human Capital Theory

    Science.gov (United States)

    Kaufman, Neil A.; Geroy, Gary D.

    2007-01-01

    Human capital development is one of the emerging areas of study with regard to social science theory, practice, and research. A relatively new concept, human capital is described in terms of individual knowledge skills and experience. It is currently expressed as a function of education as well as a measure of economic activity. Little theory…

  6. Whole genome functional analysis identifies novel components required for mitotic spindle integrity in human cells

    OpenAIRE

    Rines, Daniel R; Gomez-Ferreria, Maria Ana; Zhou, Yingyao; DeJesus, Paul; Grob,Seanna; Batalov, Serge; Labow, Marc; Huesken, Dieter; Mickanin, Craig; Hall, Jonathan; Reinhardt, Mischa; Natt, Francois; Lange, Joerg; Sharp, David J.; Chanda, Sumit K.

    2008-01-01

    Background The mitotic spindle is a complex mechanical apparatus required for accurate segregation of sister chromosomes during mitosis. We designed a genetic screen using automated microscopy to discover factors essential for mitotic progression. Using a RNA interference library of 49,164 double-stranded RNAs targeting 23,835 human genes, we performed a loss of function screen to look for small interfering RNAs that arrest cells in metaphase. Results Here we report the identification of gene...

  7. Effects of Energy Storage Systems Grid Code Requirements on Interface Protection Performances in Low Voltage Networks

    Directory of Open Access Journals (Sweden)

    Fabio Bignucolo

    2017-03-01

    Full Text Available The ever-growing penetration of local generation in distribution networks and the large diffusion of energy storage systems (ESSs foreseen in the near future are bound to affect the effectiveness of interface protection systems (IPSs, with negative impact on the safety of medium voltage (MV and low voltage (LV systems. With the scope of preserving the main network stability, international and national grid connection codes have been updated recently. Consequently, distributed generators (DGs and storage units are increasingly called to provide stabilizing functions according to local voltage and frequency. This can be achieved by suitably controlling the electronic power converters interfacing small-scale generators and storage units to the network. The paper focuses on the regulating functions required to storage units by grid codes currently in force in the European area. Indeed, even if such regulating actions would enable local units in participating to network stability under normal steady-state operating conditions, it is shown through dynamic simulations that they may increase the risk of unintentional islanding occurrence. This means that dangerous operating conditions may arise in LV networks in case dispersed generators and storage systems are present, even if all the end-users are compliant with currently applied connection standards.

  8. Biohydrogen production from microalgal biomass: energy requirement, CO2 emissions and scale-up scenarios.

    Science.gov (United States)

    Ferreira, Ana F; Ortigueira, Joana; Alves, Luís; Gouveia, Luísa; Moura, Patrícia; Silva, Carla

    2013-09-01

    This paper presents a life cycle inventory of biohydrogen production by Clostridium butyricum through the fermentation of the whole Scenedesmus obliquus biomass. The main purpose of this work was to determine the energy consumption and CO2 emissions during the production of hydrogen. This was accomplished through the fermentation of the microalgal biomass cultivated in an outdoor raceway pond and the preparation of the inoculum and culture media. The scale-up scenarios are discussed aiming for a potential application to a fuel cell hybrid taxi fleet. The H2 yield obtained was 7.3 g H2/kg of S. obliquus dried biomass. The results show that the production of biohydrogen required 71-100 MJ/MJ(H2) and emitted about 5-6 kg CO2/MJ(H2). Other studies and production technologies were taken into account to discuss an eventual process scale-up. Increased production rates of microalgal biomass and biohydrogen are necessary for bioH2 to become competitive with conventional production pathways. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Specific TonB-ExbB-ExbD energy transduction systems required for ferric enterobactin acquisition in Campylobacter.

    Science.gov (United States)

    Zeng, Ximin; Xu, Fuzhou; Lin, Jun

    2013-10-01

    Ferric enterobactin (FeEnt) acquisition plays a critical role in the pathophysiology of Campylobacter, the leading bacterial cause of human gastroenteritis in industrialized countries. In Campylobacter, the surface-exposed receptor, CfrA or CfrB, functions as a 'gatekeeper' for initial binding of FeEnt. Subsequent transport across the outer membrane is energized by TonB-ExbB-ExbD energy transduction systems. Although there are up to three TonB-ExbB-ExbD systems in Campylobacter, the cognate components of TonB-ExbB-ExbD for FeEnt acquisition are still largely unknown. In this study, we addressed this issue using complementary molecular approaches: comparative genomic analysis, random transposon mutagenesis and site-directed mutagenesis in two representative C. jejuni strains, NCTC 11168 and 81-176. We demonstrated that CfrB could interact with either TonB2 or TonB3 for efficient Ent-mediated iron acquisition. However, TonB3 is a dominant player in the CfrA-dependent pathway. The ExbB2 and ExbD2 components were essential for both CfrA- and CfrB-dependent FeEnt acquisition. Sequences analysis identified potential TonB boxes in CfrA and CfrB, and the corresponding binding sites in TonB. In conclusion, these findings identify specific TonB-ExbB-ExbD energy transduction components required for FeEnt acquisition, and provide insights into the complex molecular interactions of FeEnt acquisition systems in Campylobacter. © 2013 Federation of European Microbiological Societies. Published by John Wiley & Sons Ltd. All rights reserved.

  10. Most neutralizing human monoclonal antibodies target novel epitopes requiring both Lassa virus glycoprotein subunits

    Science.gov (United States)

    Robinson, James E.; Hastie, Kathryn M.; Cross, Robert W.; Yenni, Rachael E.; Elliott, Deborah H.; Rouelle, Julie A.; Kannadka, Chandrika B.; Smira, Ashley A.; Garry, Courtney E.; Bradley, Benjamin T.; Yu, Haini; Shaffer, Jeffrey G.; Boisen, Matt L.; Hartnett, Jessica N.; Zandonatti, Michelle A.; Rowland, Megan M.; Heinrich, Megan L.; Martínez-Sobrido, Luis; Cheng, Benson; de la Torre, Juan C.; Andersen, Kristian G.; Goba, Augustine; Momoh, Mambu; Fullah, Mohamed; Gbakie, Michael; Kanneh, Lansana; Koroma, Veronica J.; Fonnie, Richard; Jalloh, Simbirie C.; Kargbo, Brima; Vandi, Mohamed A.; Gbetuwa, Momoh; Ikponmwosa, Odia; Asogun, Danny A.; Okokhere, Peter O.; Follarin, Onikepe A.; Schieffelin, John S.; Pitts, Kelly R.; Geisbert, Joan B.; Kulakoski, Peter C.; Wilson, Russell B.; Happi, Christian T.; Sabeti, Pardis C.; Gevao, Sahr M.; Khan, S. Humarr; Grant, Donald S.; Geisbert, Thomas W.; Saphire, Erica Ollmann; Branco, Luis M.; Garry, Robert F.

    2016-01-01

    Lassa fever is a severe multisystem disease that often has haemorrhagic manifestations. The epitopes of the Lassa virus (LASV) surface glycoproteins recognized by naturally infected human hosts have not been identified or characterized. Here we have cloned 113 human monoclonal antibodies (mAbs) specific for LASV glycoproteins from memory B cells of Lassa fever survivors from West Africa. One-half bind the GP2 fusion subunit, one-fourth recognize the GP1 receptor-binding subunit and the remaining fourth are specific for the assembled glycoprotein complex, requiring both GP1 and GP2 subunits for recognition. Notably, of the 16 mAbs that neutralize LASV, 13 require the assembled glycoprotein complex for binding, while the remaining 3 require GP1 only. Compared with non-neutralizing mAbs, neutralizing mAbs have higher binding affinities and greater divergence from germline progenitors. Some mAbs potently neutralize all four LASV lineages. These insights from LASV human mAb characterization will guide strategies for immunotherapeutic development and vaccine design. PMID:27161536

  11. Features of Circulating Parainfluenza Virus Required for Growth in Human Airway

    Directory of Open Access Journals (Sweden)

    Laura M. Palermo

    2016-03-01

    Full Text Available Respiratory paramyxoviruses, including the highly prevalent human parainfluenza viruses, cause the majority of childhood croup, bronchiolitis, and pneumonia, yet there are currently no vaccines or effective treatments. Paramyxovirus research has relied on the study of laboratory-adapted strains of virus in immortalized cultured cell lines. We show that findings made in such systems about the receptor interaction and viral fusion requirements for entry and fitness—mediated by the receptor binding protein and the fusion protein—can be drastically different from the requirements for infection in vivo. Here we carried out whole-genome sequencing and genomic analysis of circulating human parainfluenza virus field strains to define functional and structural properties of proteins of circulating strains and to identify the genetic basis for properties that confer fitness in the field. The analysis of clinical strains suggests that the receptor binding-fusion molecule pairs of circulating viruses maintain a balance of properties that result in an inverse correlation between fusion in cultured cells and growth in vivo. Future analysis of entry mechanisms and inhibitory strategies for paramyxoviruses will benefit from considering the properties of viruses that are fit to infect humans, since a focus on viruses that have adapted to laboratory work provides a distinctly different picture of the requirements for the entry step of infection.

  12. Sp110 transcription is induced and required by Anaplasma phagocytophilum for infection of human promyelocytic cells

    Directory of Open Access Journals (Sweden)

    Naranjo Victoria

    2007-09-01

    Full Text Available Abstract Background The tick-borne intracellular pathogen, Anaplasma phagocytophilum (Rickettsiales: Anaplasmataceae causes human granulocytic anaplasmosis after infection of polymorphonuclear leucocytes. The human Sp110 gene is a member of the nuclear body (NB components that functions as a nuclear hormone receptor transcriptional coactivator and plays an important role in immunoprotective mechanisms against pathogens in humans. In this research, we hypothesized that Sp110 may be involved in the infection of human promyelocytic HL-60 cells with A. phagocytophilum. Methods The human Sp110 and A. phagocytophilum msp4 mRNA levels were evaluated by real-time RT-PCR in infected human HL-60 cells sampled at 0, 12, 24, 48, 72 and 96 hours post-infection. The effect of Sp110 expression on A. phagocytophilum infection was determined by RNA interference (RNAi. The expression of Sp110 was silenced in HL-60 cells by RNAi using pre-designed siRNAs using the Nucleofector 96-well shuttle system (Amaxa Biosystems, Gaithersburg, MD, USA. The A. phagocytophilum infection levels were evaluated in HL-60 cells after RNAi by real-time PCR of msp4 and normalizing against human Alu sequences. Results While Sp110 mRNA levels increased concurrently with A. phagocytophilum infections in HL-60 cells, the silencing of Sp110 expression by RNA interference resulted in decreased infection levels. Conclusion These results demonstrated that Sp110 expression is required for A. phagocytophilum infection and multiplication in HL-60 cells, and suggest a previously undescribed mechanism by which A. phagocytophilum modulates Sp110 mRNA levels to facilitate establishment of infection of human HL-60 cells.

  13. Human-motion energy harvester for autonomous body area sensors

    Science.gov (United States)

    Geisler, M.; Boisseau, S.; Perez, M.; Gasnier, P.; Willemin, J.; Ait-Ali, I.; Perraud, S.

    2017-03-01

    This paper reports on a method to optimize an electromagnetic energy harvester converting the low-frequency body motion and aimed at powering wireless body area sensors. This method is based on recorded accelerations, and mechanical and transduction models that enable an efficient joint optimization of the structural parameters. An optimized prototype of 14.8 mmØ × 52 mm, weighting 20 g, has generated up to 4.95 mW in a resistive load when worn at the arm during a run, and 6.57 mW when hand-shaken. Among the inertial electromagnetic energy harvesters reported so far, this one exhibits one of the highest power densities (up to 730 μW cm-3). The energy harvester was finally used to power a bluetooth low energy wireless sensor node with accelerations measurements at 25 Hz.

  14. Energy data visualisation requires additional approaches to continue to be relevant in a world with greater low-carbon generation.

    Directory of Open Access Journals (Sweden)

    I.A. Grant Wilson

    2016-08-01

    Full Text Available The hypothesis described in this article proposes that energy visualisation diagrams commonly used need additional changes to continue to be relevant in a world with greater low-carbon generation. The diagrams that display national energy data are influenced by the properties of the type of energy being displayed, which in most cases has historically meant fossil fuels, nuclear fuels or hydro. As many energy systems throughout the world increase their use of electricity from wind or solar based renewables, a more granular display of energy data in the time domain is required. This article also introduces the shared axes energy diagram that provides a simple and powerful way in which to compare the scale and seasonality of the demands and supplies of an energy system. This aims to complement rather than replace existing diagrams, and has an additional benefit of promoting a whole systems approach to energy systems, as differing energy vectors such as natural gas, transport fuels, and electricity can all be displayed together. This in particular, is useful to both policy makers and to industry, to build a visual foundation for a whole systems narrative, which provides a basis for discussion of the synergies and opportunities across and between different energy vectors and demands. The diagram’s ability to wrap a sense of scale around a whole energy system in a simple way is thought to explain its growing popularity.

  15. Predictors for achieving protein and energy requirements in undernourished hospital patients

    NARCIS (Netherlands)

    Leistra, Eva; Willeboordse, Floor; Bokhorst - de van der Schueren, A.E. van Marian; Visser, Marjolein; Weijs, J.M. Peter; Haans - van den Oord, Annelie; Oostenbrink, Jan; Evers , M. Anja; Kruizenga, M. Hinke

    2011-01-01

    Background & aims Providing sufficient protein an energy is considered crucial in the treatment of undernutrition. Still, the majority of undernourished hospital patients have a suboptimal protein and energy intake. The aim of this study was to investigate predictors for achieving protein and energy

  16. Consequences of inadequate food energy and negative energy balance in humans.

    Science.gov (United States)

    Kurpad, A V; Muthayya, S; Vaz, M

    2005-10-01

    Energy deficiency is probably best measured in adults by the body mass index (BMI). Acute energy deficiency (AED) is associated with body weight loss, along with changes in body composition, as well as a reduced BMR and physical activity. Chronic energy deficiency (CED) is an inadequacy in food to which individuals adapt, at some cost. Individuals with this have never 'lost' weight: they have simply grown less. They adapt to the decreased food energy by reductions in their total energy expenditure (TEE), linked mainly to a lower body size, and to their physical activity. It seems unlikely that enhanced metabolic efficiency contributes substantially to energy saving in CED. Supplementation of energy deficient individuals is accompanied by significant fat deposition; this may have deleterious consequences. Women in many developing countries achieve a successful outcome to pregnancy in spite of being chronically undernourished. Reductions in basal metabolism and behavioural changes in the form of diminished physical activity could meet most of the extra energy needed for pregnancy. Milk energy output is maintained within the expected range in undernourished lactating mothers. Energy deficiency in children is best measured by height-for-age for stunting, and weight-for-height for wasting. Deficits in behavioural and functional parameters in children exist with undernutrition, and can be reduced by early nutritional supplementation along with the appropriate environment.

  17. Energy requirement for maintenance and gain for two genotypes of quails housed in different breeding rearing systems

    Directory of Open Access Journals (Sweden)

    José Jordão Filho

    2011-11-01

    Full Text Available This study aimed to estimate the energy requirements for maintenance and gain of Japanese and European quails under growth housed in two rearing systems: floor pens and cages. To determine maintenance requirements, two experiments were conducted with birds housed in cages in environmental chambers (experiment 1 and in floor pens at room temperature conditions (experiment 2. The experimental design was completely randomized with four levels of feed supply (100, 75, 50 and 25% and four repetitions. Energy requirements for maintenance were estimated by the comparative slaughter method through a feeding trial. In experiment 1, 64 Japanese and European quails per treatment were housed in cages of climatic chambers at 18, 24, and 28 °C, while in experiment 2, 352 quails per treatment were housed in floor pens at room temperature (26 °C. To estimate gain requirements, five slaughters were performed with quails receiving feed ad libitum and housed under controlled temperature of 18 °C (experiment 3. Prediction equations were obtained to estimate requirements for maintenance and gain of energy for the two genotypes of quails. The room temperature and breeding system affected the estimates of energy requirements for maintenance. The genotypes presented different estimates for maintenance and gain. Prediction models should be developed considering the room temperature and quails' genotypes.

  18. Glycerol: An unexpected major metabolite of energy metabolism by the human malaria parasite

    Directory of Open Access Journals (Sweden)

    Bray Patrick G

    2009-03-01

    Full Text Available Abstract Background Malaria is a global health emergency, and yet our understanding of the energy metabolism of the principle causative agent of this devastating disease, Plasmodium falciparum, remains rather basic. Glucose was shown to be an essential nutritional requirement nearly 100 years ago and since this original observation, much of the current knowledge of Plasmodium energy metabolism is based on early biochemical work, performed using basic analytical techniques (e.g. paper chromatography, carried out almost exclusively on avian and rodent malaria. Data derived from malaria parasite genome and transcriptome studies suggest that the energy metabolism of the parasite may be more complex than hitherto anticipated. This study was undertaken in order to further characterize the fate of glucose catabolism in the human malaria parasite, P. falciparum. Methods Products of glucose catabolism were determined by incubating erythrocyte-freed parasites with D-[1-13C] glucose under controlled conditions and metabolites were identified using 13C-NMR spectroscopy. Results Following a 2 h incubation of freed-P. falciparum parasites with 25 mM D-[1-13C] glucose (n = 4, the major metabolites identified included; [3-13C] lactate, [1,3-13C] glycerol, [3-13C] pyruvate, [3-13C] alanine and [3-13C] glycerol-3-phosphate. Control experiments performed with uninfected erythrocytes incubated under identical conditions did not show any metabolism of D-[1-13C] glucose to glycerol or glycerol-3-phosphate. Discussion The identification of glycerol as a major glucose metabolite confirms the view that energy metabolism in this parasite is more complex than previously proposed. It is hypothesized here that glycerol production by the malaria parasite is the result of a metabolic adaptation to growth in O2-limited (and CO2 elevated conditions by the operation of a glycerol-3-phosphate shuttle for the re-oxidation of assimilatory NADH. Similar metabolic adaptations have

  19. Report on the COSPAR Workshop on Refining Planetary Protection Requirements for Human Missions

    Science.gov (United States)

    Spry, James Andrew; Rummel, John; Conley, Catharine; Race, Margaret; Kminek, Gerhard; Siegel, Bette

    2016-07-01

    A human mission to Mars has been the driving long-term goal for the development of the Global Exploration Roadmap by the International Space Exploration Coordination Group. Additionally, multiple national space agencies and commercial organizations have published similar plans and aspirations for human missions beyond LEO. The current COSPAR planetary protection "Guidelines for Human Missions to Mars" were developed in a series of workshops in the early 2000s and adopted into COSPAR policy at the Montreal Assembly in 2008. With changes and maturation in mission architecture concepts and hardware capabilities, the holding of a workshop provided an opportunity for timely review of these guidelines and their interpretation within current frameworks provided by ISECG and others. The COSPAR Workshop on Refining Planetary Protection Requirements for Human Missions was held in the US in spring 2016 to evaluate recent efforts and activities in the context of current COSPAR policy, as well as collect inputs from the various organizations considering crewed exploration missions to Mars and precursor robotic missions focused on surface material properties and environmental challenges. The workshop also considered potential updates to the COSPAR policy for human missions across a range of planetary destinations. This paper will report on those deliberations.

  20. Energy absorption buildup factors of human organs and tissues at energies and penetration depths relevant for radiotherapy and diagnostics

    DEFF Research Database (Denmark)

    Manohara, S. R.; Hanagodimath, S. M.; Gerward, Leif

    2011-01-01

    Energy absorption geometric progression (GP) fitting parameters and the corresponding buildup factors have been computed for human organs and tissues, such as adipose tissue, blood (whole), cortical bone, brain (grey/white matter), breast tissue, eye lens, lung tissue, skeletal muscle, ovary...

  1. The greenhouse gas emissions and fossil energy requirement of bioplastics from cradle to gate of a biomass refinery.

    Science.gov (United States)

    Yu, Jian; Chen, Lilian X L

    2008-09-15

    Polyhydroxyalkanoates (PHA) are promising eco-friendly bioplastics that can be produced from cellulosic ethanol biorefineries as value-added coproducts. A cradle-to-factory-gate life cycle assessment is performed with two important categories: the greenhouse gas (GHG)emissions and fossil energy requirement per kg of bioplastics produced. The analysis indicates that PHA bioplastics contribute clearly to the goal of mitigating GHG emissions with only 0.49 kg CO(2-e) being emitted from production of 1 kg of resin. Compared with 2-3 kg CO(2-e) of petrochemical counterparts, it is about 80% reduction of the global warming potential. The fossil energy requirement per kg of bioplastics is 44 MJ, lowerthan those of petrochemical counterparts (78-88 MJ/kg resin). About 62% of fossil energy is used for processing utilities and wastewater treatment, and the rest is required for raw materials in different life cycle stages.

  2. Final Report: Human Capacity Building Grant for Renewable Energy Development

    Energy Technology Data Exchange (ETDEWEB)

    Sando, Wil

    2010-01-03

    Warm Springs Power and Water Enterprise (WSPWE), a Corporate Entity of the Confederated Tribes of Warm Springs Oregon, developed and distributed written materials, held workshops and field trips to educate tribal members on renewable energy projects that are a possibility utilizing resources on reservation. In order to build stronger public and Tribal Council support for the development of renewable energy projects on the reservation, WSPWE conducted a 12 month public education and technical expertise development program. The objectives of this program were to: To build a knowledge base within the tribal community regarding renewable energy development potential and opportunities on reservation lands. To educate the tribal community regarding development process, impacts and benefits. To increase the technical expertise of tribal government and Tribal Council.

  3. 21 CFR 201.56 - Requirements on content and format of labeling for human prescription drug and biological products.

    Science.gov (United States)

    2010-04-01

    ... human prescription drug and biological products. 201.56 Section 201.56 Food and Drugs FOOD AND DRUG... human prescription drug and biological products. (a) General requirements. Prescription drug labeling... requirements in §§ 201.56(d) and 201.57. (1) The following categories of prescription drug products are...

  4. Gamma-ray, neutron, and hard X-ray studies and requirements for a high-energy solar physics facility

    Science.gov (United States)

    Ramaty, R.; Dennis, B. R.; Emslie, A. G.

    1988-01-01

    The requirements for future high-resolution spatial, spectral, and temporal observation of hard X-rays, gamma rays and neutrons from solar flares are discussed in the context of current high-energy flare observations. There is much promise from these observations for achieving a deep understanding of processes of energy release, particle acceleration and particle transport in a complicated environment such as the turbulent and highly magnetized atmosphere of the active sun.

  5. Primary human cervical carcinoma cells require human papillomavirus E6 and E7 expression for ongoing proliferation.

    Science.gov (United States)

    Magaldi, Thomas G; Almstead, Laura L; Bellone, Stefania; Prevatt, Edward G; Santin, Alessandro D; DiMaio, Daniel

    2012-01-05

    Repression of human papillomavirus (HPV) E6 and E7 oncogenes in established cervical carcinoma cell lines causes senescence due to reactivation of cellular tumor suppressor pathways. Here, we determined whether ongoing expression of HPV16 or HPV18 oncogenes is required for the proliferation of primary human cervical carcinoma cells in serum-free conditions at low passage number after isolation from patients. We used an SV40 viral vector expressing the bovine papillomavirus E2 protein to repress E6 and E7 in these cells. To enable efficient SV40 infection and E2 gene delivery, we first incubated the primary cervical cancer cells with the ganglioside GM1, a cell-surface receptor for SV40 that is limiting in these cells. Repression of HPV in primary cervical carcinoma cells caused them to undergo senescence, but the E2 protein had little effect on HPV-negative primary cells. These data suggest that E6 and E7 dependence is an inherent property of human cervical cancer cells. Copyright © 2011 Elsevier Inc. All rights reserved.

  6. Primary human cervical carcinoma cells require human papillomavirus E6 and E7 expression for ongoing proliferation

    Energy Technology Data Exchange (ETDEWEB)

    Magaldi, Thomas G.; Almstead, Laura L. [Department of Genetics, Yale School of Medicine, P.O. Box 208005, New Haven, CT 06520-8005 (United States); Bellone, Stefania [Department of Obstetrics and Gynecology and Reproductive Sciences, Yale School of Medicine, P.O. Box 208063, New Haven, CT 06520-8063 (United States); Prevatt, Edward G. [Department of Genetics, Yale School of Medicine, P.O. Box 208005, New Haven, CT 06520-8005 (United States); Santin, Alessandro D. [Department of Obstetrics and Gynecology and Reproductive Sciences, Yale School of Medicine, P.O. Box 208063, New Haven, CT 06520-8063 (United States); Yale Comprehensive Cancer Center, P.O. Box 208028, New Haven, CT 06520-8028 (United States); DiMaio, Daniel, E-mail: daniel.dimaio@yale.edu [Department of Genetics, Yale School of Medicine, P.O. Box 208005, New Haven, CT 06520-8005 (United States); Department of Therapeutic Radiology, Yale School of Medicine, P.O. Box 208040, New Haven, CT 06520-8040 (United States); Department of Molecular Biophysics and Biochemistry, Yale School of Medicine, P.O. Box 208024 (United States); Yale Comprehensive Cancer Center, P.O. Box 208028, New Haven, CT 06520-8028 (United States)

    2012-01-05

    Repression of human papillomavirus (HPV) E6 and E7 oncogenes in established cervical carcinoma cell lines causes senescence due to reactivation of cellular tumor suppressor pathways. Here, we determined whether ongoing expression of HPV16 or HPV18 oncogenes is required for the proliferation of primary human cervical carcinoma cells in serum-free conditions at low passage number after isolation from patients. We used an SV40 viral vector expressing the bovine papillomavirus E2 protein to repress E6 and E7 in these cells. To enable efficient SV40 infection and E2 gene delivery, we first incubated the primary cervical cancer cells with the ganglioside GM1, a cell-surface receptor for SV40 that is limiting in these cells. Repression of HPV in primary cervical carcinoma cells caused them to undergo senescence, but the E2 protein had little effect on HPV-negative primary cells. These data suggest that E6 and E7 dependence is an inherent property of human cervical cancer cells.

  7. Implementation of Legal Requirements for Energy Using Products (EuP in Lithuanian Industry: Problems and Possibilities

    Directory of Open Access Journals (Sweden)

    Inga Gurauskienė

    2010-07-01

    Full Text Available Energy using products (EuPs are of great concern, because of their proliferation in every-day activity and environmental impact through their life cycle. The greatest share of environmental impact is related to energy use in the usage stage. The new legal requirements implemented in the EU are intended for tackling the environmental impact of EuPs applying the life cycle approach. The aim of this paper is to present the legal requirements for EuPs and eco-design measures the manufacturing companies have to undertake in order to gain competitive advantage while implementing them at the production stage.

  8. Investigation of Intermediary Metabolism and Energy Exchange Following Human Trauma.

    Science.gov (United States)

    1979-07-01

    afebrile, hospitalized patients (9), and with values fram normal subjects C13).. In the present study, values for in- sensible water loss were...supplementation of wheat gluten at adequate and restricted energy intakes in young men. Am J Clin Nutr 26:965, 1973 19. Mizro HN, Wikramanayake TW: Absence of

  9. Pedometer and Human Energy Balance Applications for Science Instruction

    Science.gov (United States)

    Rye, James A.; Smolski, Stefan

    2007-01-01

    Teachers can use pedometers to facilitate inquiry learning and show students the need for mathematics in scientific investigation. The authors conducted activities with secondary students that investigated intake and expenditure components of the energy balance algorithm, which led to inquiries about pedometers and related data. By investigating…

  10. Sex differences of human cortical blood flow and energy metabolism

    DEFF Research Database (Denmark)

    Aanerud, Joel; Borghammer, Per; Rodell, Anders

    2017-01-01

    cortex. Women had significant decreases of cerebral blood flow as function of age in frontal and parietal lobes. Young women had significantly higher cerebral blood flow than men in frontal and temporal lobes, but these differences had disappeared at age 65. The absent sex difference of cerebral energy...

  11. Visual Genome-Wide RNAi Screening to Identify Human Host Factors Required for Trypanosoma cruzi Infection

    Science.gov (United States)

    de Macedo Dossin, Fernando; Choi, Seo Yeon; Kim, Nam Youl; Kim, Hi Chul; Jung, Sung Yong; Schenkman, Sergio; Almeida, Igor C.; Emans, Neil; Freitas-Junior, Lucio H.

    2011-01-01

    The protozoan parasite Trypanosoma cruzi is the etiologic agent of Chagas disease, a neglected tropical infection that affects millions of people in the Americas. Current chemotherapy relies on only two drugs that have limited efficacy and considerable side effects. Therefore, the development of new and more effective drugs is of paramount importance. Although some host cellular factors that play a role in T. cruzi infection have been uncovered, the molecular requirements for intracellular parasite growth and persistence are still not well understood. To further study these host-parasite interactions and identify human host factors required for T. cruzi infection, we performed a genome-wide RNAi screen using cellular microarrays of a printed siRNA library that spanned the whole human genome. The screening was reproduced 6 times and a customized algorithm was used to select as hits those genes whose silencing visually impaired parasite infection. The 162 strongest hits were subjected to a secondary screening and subsequently validated in two different cell lines. Among the fourteen hits confirmed, we recognized some cellular membrane proteins that might function as cell receptors for parasite entry and others that may be related to calcium release triggered by parasites during cell invasion. In addition, two of the hits are related to the TGF-beta signaling pathway, whose inhibition is already known to diminish levels of T. cruzi infection. This study represents a significant step toward unveiling the key molecular requirements for host cell invasion and revealing new potential targets for antiparasitic therapy. PMID:21625474

  12. Visual genome-wide RNAi screening to identify human host factors required for Trypanosoma cruzi infection.

    Directory of Open Access Journals (Sweden)

    Auguste Genovesio

    Full Text Available The protozoan parasite Trypanosoma cruzi is the etiologic agent of Chagas disease, a neglected tropical infection that affects millions of people in the Americas. Current chemotherapy relies on only two drugs that have limited efficacy and considerable side effects. Therefore, the development of new and more effective drugs is of paramount importance. Although some host cellular factors that play a role in T. cruzi infection have been uncovered, the molecular requirements for intracellular parasite growth and persistence are still not well understood. To further study these host-parasite interactions and identify human host factors required for T. cruzi infection, we performed a genome-wide RNAi screen using cellular microarrays of a printed siRNA library that spanned the whole human genome. The screening was reproduced 6 times and a customized algorithm was used to select as hits those genes whose silencing visually impaired parasite infection. The 162 strongest hits were subjected to a secondary screening and subsequently validated in two different cell lines. Among the fourteen hits confirmed, we recognized some cellular membrane proteins that might function as cell receptors for parasite entry and others that may be related to calcium release triggered by parasites during cell invasion. In addition, two of the hits are related to the TGF-beta signaling pathway, whose inhibition is already known to diminish levels of T. cruzi infection. This study represents a significant step toward unveiling the key molecular requirements for host cell invasion and revealing new potential targets for antiparasitic therapy.

  13. Straw bale houses in a moderate climate: adaptable to meet future energy performance requirements?

    OpenAIRE

    Verbeeck, Griet; Ponet, Jolien

    2012-01-01

    The energy performance regulations for buildings, introduced in many countries during the last decade, will be tightened in the future, even up to zero energy level. Apart from that, ancient building techniques that use renewable materials, such as straw bales, have a revival, inspired by concerns about the environmental impact of building materials. However, straw bale construction related organisations are concerned whether this building technique will survive the upcoming severe energy per...

  14. Future US energy demands based upon traditional consumption patterns lead to requirements which significantly exceed domestic supply

    Science.gov (United States)

    1975-01-01

    Energy consumption in the United States has risen in response to both increasing population and to increasing levels of affluence. Depletion of domestic energy reserves requires consumption modulation, production of fossil fuels, more efficient conversion techniques, and large scale transitions to non-fossile fuel energy sources. Widening disparity between the wealthy and poor nations of the world contributes to trends that increase the likelihood of group action by the lesser developed countries to achieve political and economic goals. The formation of anticartel cartels is envisioned.

  15. Human Exonuclease 5 Is a Novel Sliding Exonuclease Required for Genome Stability*

    Science.gov (United States)

    Sparks, Justin L.; Kumar, Rakesh; Singh, Mayank; Wold, Marc S.; Pandita, Tej K.; Burgers, Peter M.

    2012-01-01

    Previously, we characterized Saccharomyces cerevisiae exonuclease 5 (EXO5), which is required for mitochondrial genome maintenance. Here, we identify the human homolog (C1orf176; EXO5) that functions in the repair of nuclear DNA damage. Human EXO5 (hEXO5) contains an iron-sulfur cluster. It is a single-stranded DNA (ssDNA)-specific bidirectional exonuclease with a strong preference for 5′-ends. After loading at an ssDNA end, hEXO5 slides extensively along the ssDNA prior to cutting, hence the designation sliding exonuclease. However, the single-stranded binding protein human replication protein A (hRPA) restricts sliding and enforces a unique, species-specific 5′-directionality onto hEXO5. This specificity is lost with a mutant form of hRPA (hRPA-t11) that fails to interact with hEXO5. hEXO5 localizes to nuclear repair foci in response to DNA damage, and its depletion in human cells leads to an increased sensitivity to DNA-damaging agents, in particular interstrand cross-linking-inducing agents. Depletion of hEXO5 also results in an increase in spontaneous and damage-induced chromosome abnormalities including the frequency of triradial chromosomes, suggesting an additional defect in the resolution of stalled DNA replication forks in hEXO5-depleted cells. PMID:23095756

  16. Human Cells Require Non-stop Ribosome Rescue Activity in Mitochondria.

    Directory of Open Access Journals (Sweden)

    Heather A Feaga

    2016-03-01

    Full Text Available Bacteria use trans-translation and the alternative rescue factors ArfA (P36675 and ArfB (Q9A8Y3 to hydrolyze peptidyl-tRNA on ribosomes that stall near the 3' end of an mRNA during protein synthesis. The eukaryotic protein ICT1 (Q14197 is homologous to ArfB. In vitro ribosome rescue assays of human ICT1 and Caulobacter crescentus ArfB showed that these proteins have the same activity and substrate specificity. Both ArfB and ICT1 hydrolyze peptidyl-tRNA on nonstop ribosomes or ribosomes stalled with ≤6 nucleotides extending past the A site, but are unable to hydrolyze peptidyl-tRNA when the mRNA extends ≥14 nucleotides past the A site. ICT1 provided sufficient ribosome rescue activity to support viability in C. crescentus cells that lacked both trans-translation and ArfB. Likewise, expression of ArfB protected human cells from death when ICT1 was silenced with siRNA. These data indicate that ArfB and ICT1 are functionally interchangeable, and demonstrate that ICT1 is a ribosome rescue factor. Because ICT1 is essential in human cells, these results suggest that ribosome rescue activity in mitochondria is required in humans.

  17. A human telomerase holoenzyme protein required for Cajal body localization and telomere synthesis.

    Science.gov (United States)

    Venteicher, Andrew S; Abreu, Eladio B; Meng, Zhaojing; McCann, Kelly E; Terns, Rebecca M; Veenstra, Timothy D; Terns, Michael P; Artandi, Steven E

    2009-01-30

    Telomerase is a ribonucleoprotein (RNP) complex that synthesizes telomere repeats in tissue progenitor cells and cancer cells. Active human telomerase consists of at least three principal subunits, including the telomerase reverse transcriptase, the telomerase RNA (TERC), and dyskerin. Here, we identify a holoenzyme subunit, TCAB1 (telomerase Cajal body protein 1), that is notably enriched in Cajal bodies, nuclear sites of RNP processing that are important for telomerase function. TCAB1 associates with active telomerase enzyme, established telomerase components, and small Cajal body RNAs that are involved in modifying splicing RNAs. Depletion of TCAB1 by using RNA interference prevents TERC from associating with Cajal bodies, disrupts telomerase-telomere association, and abrogates telomere synthesis by telomerase. Thus, TCAB1 controls telomerase trafficking and is required for telomere synthesis in human cancer cells.

  18. Browning of human adipocytes requires KLF11 and reprogramming of PPARγ superenhancers

    DEFF Research Database (Denmark)

    Loft, Anne; Forss, Isabel; Siersbæk, Majken Storm

    2015-01-01

    Long-term exposure to peroxisome proliferator-activated receptor γ (PPARγ) agonists such as rosiglitazone induces browning of rodent and human adipocytes; however, the transcriptional mechanisms governing this phenotypic switch in adipocytes are largely unknown. Here we show that rosiglitazone...... reprogramming of PPARγ binding, leading to the formation of PPARγ "superenhancers" that are selective for brown-in-white (brite) adipocytes. These are highly associated with key brite-selective genes. Based on such an association, we identified an evolutionarily conserved metabolic regulator, Kruppel......-like factor 11 (KLF11), as a novel browning transcription factor in human adipocytes that is required for rosiglitazone-induced browning, including the increase in mitochondrial oxidative capacity. KLF11 is directly induced by PPARγ and appears to cooperate with PPARγ in a feed-forward manner to activate...

  19. Investigation of Intermediary Metabolism and Energy Exchange Following Human Trauma.

    Science.gov (United States)

    1980-09-01

    muscle and adipose tissue LPL activity. Methods Subcutaneous fat biopsies from the anterior thigh, and needle biopsies of the vastas lateralis muscle were...substrate represents an important energy source in these states, as well as during starvation in normal man. Low tissue carnitine levels, resulting in...London, J & A Churchill, 1970, p 155 3. Border JR, Burns GP, Rumph C, et al: Carnitine levels in severe ’infection and starvation: A possible key to the

  20. Postmarketing safety reports for human drug and biological products; electronic submission requirements. Final rule.

    Science.gov (United States)

    2014-06-10

    The Food and Drug Administration (FDA or we) is amending its postmarketing safety reporting regulations for human drug and biological products to require that persons subject to mandatory reporting requirements submit safety reports in an electronic format that FDA can process, review, and archive. FDA is taking this action to improve the Agency's systems for collecting and analyzing postmarketing safety reports. The change will help the Agency to more rapidly review postmarketing safety reports, identify emerging safety problems, and disseminate safety information in support of FDA's public health mission. In addition, the amendments will be a key element in harmonizing FDA's postmarketing safety reporting regulations with international standards for the electronic submission of safety information.

  1. Estimation of the maintenance energy requirements, methane emissions and nitrogen utilization efficiency of two suckler cow genotypes.

    Science.gov (United States)

    Zou, C X; Lively, F O; Wylie, A R G; Yan, T

    2016-04-01

    Seventeen non-lactating dairy-bred suckler cows (LF; Limousin×Holstein-Friesian) and 17 non-lactating beef composite breed suckler cows (ST; Stabiliser) were used to study enteric methane emissions and energy and nitrogen (N) utilization from grass silage diets. Cows were housed in cubicle accommodation for 17 days, and then moved to individual tie-stalls for an 8-day digestibility balance including a 2-day adaption followed by immediate transfer to an indirect, open-circuit, respiration calorimeters for 3 days with gaseous exchange recorded over the last two of these days. Grass silage was offered ad libitum once daily at 0900 h throughout the study. There were no significant differences (P>0.05) between the genotypes for energy intakes, energy outputs or energy use efficiency, or for methane emission rates (methane emissions per unit of dry matter intake or energy intake), or for N metabolism characteristics (N intake or N output in faeces or urine). Accordingly, the data for both cow genotypes were pooled and used to develop relationships between inputs and outputs. Regression of energy retention against ME intake (r 2=0.52; Penergy requirements for maintenance of 0.386, 0.392 and 0.375 MJ/kg0.75 for LF+ST, LF and ST respectively. Methane energy output was 0.066 of gross energy intake when the intercept was omitted from the linear equation (r 2=0.59; Penergy requirement, methane emission and manure N output for suckler cows and further information is required to evaluate their application in a wide range of suckler production systems.

  2. Energy homeostasis targets chromosomal reconfiguration of the human GH1 locus.

    Science.gov (United States)

    Vakili, Hana; Jin, Yan; Cattini, Peter A

    2014-11-01

    Levels of pituitary growth hormone (GH), a metabolic homeostatic factor with strong lipolytic activity, are decreased in obese individuals. GH declines prior to the onset of weight gain in response to excess caloric intake and hyperinsulinemia; however, the mechanism by which GH is reduced is not clear. We used transgenic mice expressing the human GH (hGH) gene, GH1, to assess the effect of high caloric intake on expression as well as the local chromosome structure of the intact GH1 locus. Animals exposed to 3 days of high caloric intake exhibited hyperinsulinemia without hyperglycemia and a decrease in both hGH synthesis and secretion, but no difference in endogenous production of murine GH. Efficient GH1 expression requires a long-range intrachromosomal interaction between remote enhancer sequences and the proximal promoter region through "looping" of intervening chromatin. High caloric intake disrupted this interaction and decreased both histone H3/H4 hyperacetylation and RNA polymerase II occupancy at the GH1 promoter. Incorporation of physical activity muted the effects of excess caloric intake on insulin levels, GH1 promoter hyperacetylation, chromosomal architecture, and expression. These results indicate that energy homeostasis alters postnatal hGH synthesis through dynamic changes in the 3-dimensional chromatin structure of the GH1 locus, including structures required for cell type specificity during development.

  3. Dose requirements of continuous infusion of rocuronium and atracurium throughout orthotopic liver transplantation in humans

    Institute of Scientific and Technical Information of China (English)

    WENG Xiao-chuan; ZHOU Liang; FU Yin-yan; ZHU Sheng-mei; HE Hui-liang; WU Jian

    2005-01-01

    Objective: To compare the dose requirements of continuous infusion of rocuronium and atracurium throughout orthotopic liver transplantation (OLT) in humans. Methods: Twenty male patients undergoing liver transplantation were randomly assigned to two comparable groups of 10 patients each to receive a continuous infusion of rocuronium or atracurium under itravenous balanced anesthesia. The response of adductor pollicis to train-of-four (TOF) stimulation of unlar nerve was monitored.The infusion rates of rocuronium and atracurium were adjusted to maintain T1/Tc ratio of 2%~10%. The total dose of each drug given during each of the three phases of OLT was recorded. Results: Rocuronium requirement, which were (0.468±0.167)unchanged during orthotopic liver transplantation. Conclusions: This study showed that the exclusion of the liver from the circulation results in the significantly reduced requirement of rocuronium while the requirement of atracurium was not changed,which suggests that the liver is of major importance in the clearance of rocuronium. A continuous infusion of atracurium with constant rate can provide stable neuromuscular blockade during the three stages of OLT.

  4. Decision Support System Requirements Definition for Human Extravehicular Activity Based on Cognitive Work Analysis.

    Science.gov (United States)

    Miller, Matthew James; McGuire, Kerry M; Feigh, Karen M

    2017-06-01

    The design and adoption of decision support systems within complex work domains is a challenge for cognitive systems engineering (CSE) practitioners, particularly at the onset of project development. This article presents an example of applying CSE techniques to derive design requirements compatible with traditional systems engineering to guide decision support system development. Specifically, it demonstrates the requirements derivation process based on cognitive work analysis for a subset of human spaceflight operations known as extravehicular activity. The results are presented in two phases. First, a work domain analysis revealed a comprehensive set of work functions and constraints that exist in the extravehicular activity work domain. Second, a control task analysis was performed on a subset of the work functions identified by the work domain analysis to articulate the translation of subject matter states of knowledge to high-level decision support system requirements. This work emphasizes an incremental requirements specification process as a critical component of CSE analyses to better situate CSE perspectives within the early phases of traditional systems engineering design.

  5. CALF MUSCLE WORK AND SEGMENT ENERGY CHANGES IN HUMAN TREADMILL WALKING

    NARCIS (Netherlands)

    HOF, AL; NAUTA, J; VANDERKNAAP, ER; SCHALLIG, MAA; STRUWE, DP

    1992-01-01

    The relation between changes in potential and kinetic energy in a seven-segment model of the human body and the work of m. triceps surae was investigated in four subjects walking on a treadmill at speeds between 0.5 and 2.0 m/s. Segment energy levels were determined by means of tachometers attached

  6. Energy Utilization and Environmental Health: Methods for Prediction and Evaluation of Impact on Human Health.

    Science.gov (United States)

    Wadden, Richard A., Ed.

    A variety of socio-economic criteria are suggested for the choice of how best to utilize energy resources. One of the most significant of these criteria is the prediction and evaluation of existing and potential human health effects of recovery and usage of various energy resources. Suggestions are made for incorporation of these methods in site…

  7. Simulating the physiology of athletes during endurance sports events: Modelling human energy conversion and metabolism

    NARCIS (Netherlands)

    Beek, J.H.G.M. van; Supandi, F.; Gavai, A.K.; Graaf, A.A. de; Binsl, T.W.; Hettling, H.

    2011-01-01

    The human physiological system is stressed to its limits during endurance sports competition events.We describe a whole body computational model for energy conversion during bicycle racing. About 23 per cent of the metabolic energy is used for muscle work, the rest is converted to heat. We

  8. Simulating the physiology of athletes during endurance sports events: Modelling human energy conversion and metabolism

    NARCIS (Netherlands)

    Beek, J.H.G.M. van; Supandi, F.; Gavai, A.K.; Graaf, A.A. de; Binsl, T.W.; Hettling, H.

    2011-01-01

    The human physiological system is stressed to its limits during endurance sports competition events.We describe a whole body computational model for energy conversion during bicycle racing. About 23 per cent of the metabolic energy is used for muscle work, the rest is converted to heat. We calculate

  9. Energy performance requirements for new buildings in 11 countries from Central Europe. Exemplary comparison of three buildings

    Energy Technology Data Exchange (ETDEWEB)

    Loga, Tobias; Knissel, Jens; Diefenbach, Nikolaus

    2008-12-05

    The objective of the present comparison study is to show which energy efficiency require-ments have to be complied in different European countries when a new building is going to be constructed. For this purpose three Model Buildings were defined: a single-family house, a multi-family house and a school building. For each involved country (or region) the energy quality of the thermal envelope was determined which is necessary in order to just comply with the building code. Due to requirements on the overall energy performance the requested envelope quality usually depends also on the type of heat supply system or energy carrier. Therefore the systems were varied in a parameter study. The main result for each of the three Model Buildings is a comparison table which shows the heat transfer coefficient by transmission (a sort of mean U-value) for the different countries differenti-ated by supply system types. In a final step the primary energy demand according to the German regulation (EnEV 2007) was calculated for every envelope/system combination of the different countries. This allows a comparison of buildings with different supply systems. The study was performed by experts from 11 European member states: Germany, Austria, Czech Republic, Poland, Sweden, Denmark, UK, The Netherlands, Belgium, Luxembourg and France. (orig.)

  10. HEPNet: A Knowledge Base Model of Human Energy Pool Network for Predicting the Energy Availability Status of an Individual.

    Science.gov (United States)

    Sengupta, Abhishek; Grover, Monendra; Chakraborty, Amlan; Saxena, Sarika

    2015-01-01

    HEPNet is an electronic representation of metabolic reactions occurring within human cellular organization focusing on inflow and outflow of the energy currency ATP, GTP and other energy associated moieties. The backbone of HEPNet consists of primary bio-molecules such as carbohydrates, proteins and fats which ultimately constitute the chief source for the synthesis and obliteration of energy currencies in a cell. A series of biochemical pathways and reactions constituting the catabolism and anabolism of various metabolites are portrayed through cellular compartmentalization. The depicted pathways function synchronously toward an overarching goal of producing ATP and other energy associated moieties to bring into play a variety of cellular functions. HEPNet is manually curated with raw data from experiments and is also connected to KEGG and Reactome databases. This model has been validated by simulating it with physiological states like fasting, starvation, exercise and disease conditions like glycaemia, uremia and dihydrolipoamide dehydrogenase deficiency (DLDD). The results clearly indicate that ATP is the master regulator under different metabolic conditions and physiological states. The results also highlight that energy currencies play a minor role. However, the moiety creatine phosphate has a unique character, since it is a ready-made source of phosphoryl groups for the rapid synthesis of ATP from ADP. HEPNet provides a framework for further expanding the network diverse age groups of both the sexes, followed by the understanding of energetics in more complex metabolic pathways that are related to human disorders.

  11. HEPNet: A Knowledge Base Model of Human Energy Pool Network for Predicting the Energy Availability Status of an Individual.

    Directory of Open Access Journals (Sweden)

    Abhishek Sengupta

    Full Text Available HEPNet is an electronic representation of metabolic reactions occurring within human cellular organization focusing on inflow and outflow of the energy currency ATP, GTP and other energy associated moieties. The backbone of HEPNet consists of primary bio-molecules such as carbohydrates, proteins and fats which ultimately constitute the chief source for the synthesis and obliteration of energy currencies in a cell. A series of biochemical pathways and reactions constituting the catabolism and anabolism of various metabolites are portrayed through cellular compartmentalization. The depicted pathways function synchronously toward an overarching goal of producing ATP and other energy associated moieties to bring into play a variety of cellular functions. HEPNet is manually curated with raw data from experiments and is also connected to KEGG and Reactome databases. This model has been validated by simulating it with physiological states like fasting, starvation, exercise and disease conditions like glycaemia, uremia and dihydrolipoamide dehydrogenase deficiency (DLDD. The results clearly indicate that ATP is the master regulator under different metabolic conditions and physiological states. The results also highlight that energy currencies play a minor role. However, the moiety creatine phosphate has a unique character, since it is a ready-made source of phosphoryl groups for the rapid synthesis of ATP from ADP. HEPNet provides a framework for further expanding the network diverse age groups of both the sexes, followed by the understanding of energetics in more complex metabolic pathways that are related to human disorders.

  12. Constrained Total Energy Expenditure and Metabolic Adaptation to Physical Activity in Adult Humans.

    Science.gov (United States)

    Pontzer, Herman; Durazo-Arvizu, Ramon; Dugas, Lara R; Plange-Rhule, Jacob; Bovet, Pascal; Forrester, Terrence E; Lambert, Estelle V; Cooper, Richard S; Schoeller, Dale A; Luke, Amy

    2016-02-08

    Current obesity prevention strategies recommend increasing daily physical activity, assuming that increased activity will lead to corresponding increases in total energy expenditure and prevent or reverse energy imbalance and weight gain [1-3]. Such Additive total energy expenditure models are supported by exercise intervention and accelerometry studies reporting positive correlations between physical activity and total energy expenditure [4] but are challenged by ecological studies in humans and other species showing that more active populations do not have higher total energy expenditure [5-8]. Here we tested a Constrained total energy expenditure model, in which total energy expenditure increases with physical activity at low activity levels but plateaus at higher activity levels as the body adapts to maintain total energy expenditure within a narrow range. We compared total energy expenditure, measured using doubly labeled water, against physical activity, measured using accelerometry, for a large (n = 332) sample of adults living in five populations [9]. After adjusting for body size and composition, total energy expenditure was positively correlated with physical activity, but the relationship was markedly stronger over the lower range of physical activity. For subjects in the upper range of physical activity, total energy expenditure plateaued, supporting a Constrained total energy expenditure model. Body fat percentage and activity intensity appear to modulate the metabolic response to physical activity. Models of energy balance employed in public health [1-3] should be revised to better reflect the constrained nature of total energy expenditure and the complex effects of physical activity on metabolic physiology.

  13. National Energy Efficiency Evaluation, Measurement and Verification (EM&V) Standard: Scoping Study of Issues and Implementation Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Schiller Consulting, Inc.; Schiller, Steven R.; Goldman, Charles A.; Galawish, Elsia

    2011-02-04

    This report is a scoping study that identifies issues associated with developing a national evaluation, measurement and verification (EM&V) standard for end-use, non-transportation, energy efficiency activities. The objectives of this study are to identify the scope of such a standard and define EM&V requirements and issues that will need to be addressed in a standard. To explore these issues, we provide and discuss: (1) a set of definitions applicable to an EM&V standard; (2) a literature review of existing guidelines, standards, and 'initiatives' relating to EM&V standards as well as a review of 'bottom-up' versus 'top-down' evaluation approaches; (3) a summary of EM&V related provisions of two recent federal legislative proposals (Congressman Waxman's and Markey's American Clean Energy and Security Act of 2009 and Senator Bingaman's American Clean Energy Leadership Act of 2009) that include national efficiency resource requirements; (4) an annotated list of issues that that are likely to be central to, and need to be considered when, developing a national EM&V standard; and (5) a discussion of the implications of such issues. There are three primary reasons for developing a national efficiency EM&V standard. First, some policy makers, regulators and practitioners believe that a national standard would streamline EM&V implementation, reduce costs and complexity, and improve comparability of results across jurisdictions; although there are benefits associated with each jurisdiction setting its own EM&V requirements based on their specific portfolio and evaluation budgets and objectives. Secondly, if energy efficiency is determined by the US Environmental Protection Agency to be a Best Available Control Technology (BACT) for avoiding criteria pollutant and/or greenhouse gas emissions, then a standard can be required for documenting the emission reductions resulting from efficiency actions. The third reason for a national

  14. Predicting energy requirement with pedometer-determined physical-activity level in women with chronic obstructive pulmonary disease

    Directory of Open Access Journals (Sweden)

    Farooqi N

    2015-06-01

    Full Text Available Nighat Farooqi,1 Frode Slinde,2 Maine Carlsson,3 Lena Håglin,4 Thomas Sandström1 1Department of Public Health and Clinical Medicine, Division of Respiratory Medicine and Allergy, Umeå University, Umeå, Sweden; 2Department of Internal Medicine and Clinical Nutrition, Sahlgrenska Academy, University of Gothenburg, Gothenburg, Sweden; 3Department of Community Medicine and Rehabilitation, Division of Geriatric Medicine, Umeå University, Umeå, Sweden; 4Department of Public Health and Clinical Medicine, Division of Family Medicine, Umeå University, Umeå, Sweden Background: In clinical practice, in the absence of objective measures, simple methods to predict energy requirement in patients with chronic obstructive pulmonary disease (COPD needs to be evaluated. The aim of the present study was to evaluate predicted energy requirement in females with COPD using pedometer-determined physical activity level (PAL multiplied by resting metabolic rate (RMR equations. Methods: Energy requirement was predicted in 18 women with COPD using pedometer-determined PAL multiplied by six different RMR equations (Harris–Benedict; Schofield; World Health Organization; Moore; Nordic Nutrition Recommendations; Nordenson. Total energy expenditure (TEE was measured by the criterion method: doubly labeled water. The predicted energy requirement was compared with measured TEE using intraclass correlation coefficient (ICC and Bland–Altman analyses. Results: The energy requirement predicted by pedometer-determined PAL multiplied by six different RMR equations was within a reasonable accuracy (±10% of the measured TEE for all equations except one (Nordenson equation. The ICC values between the criterion method (TEE and predicted energy requirement were: Harris–Benedict, ICC =0.70, 95% confidence interval (CI 0.23–0.89; Schofield, ICC =0.71, 95% CI 0.21–0.89; World Health Organization, ICC =0.74, 95% CI 0.33–0.90; Moore, ICC =0.69, 95% CI 0.21–0.88; Nordic

  15. Determination of Optimum Thermal Insulation Thicknesses for External Walls Considering the Heating, Cooling and Annual Energy Requirement

    Directory of Open Access Journals (Sweden)

    Ömer KAYNAKLI

    2016-06-01

    Full Text Available In this study, optimization of thermal insulation thickness applied to the external walls of buildings has been carried out comparatively based on the seasonal (space-heating and cooling and the annual energy requirements considering solar radiation effect. This study has been performed for four degree-day regions of Turkey, namely, Iskenderun (in the first region, Istanbul (in the second region, Ankara (in the third region and Ardahan (in the fourth region. By determining the sol-air temperatures for each region and maximizing the present worth value of seasonal and annual energy savings, the optimum thermal insulation thicknesses have been calculated. The effects of solar radiation on heating-cooling energy requirements, the variation of optimum insulation thicknesses and payback periods with respect to degree-day regions, the differences between the analyses based on seasonal and annual have been presented in tabular and graphical form.

  16. Mathematical modeling of the human energy metabolism based on the Selfish Brain Theory.

    Science.gov (United States)

    Chung, Matthias; Göbel, Britta

    2012-01-01

    Deregulations in the human energy metabolism may cause diseases such as obesity and type 2 diabetes mellitus. The origins of these pathologies are fairly unknown. The key role of the brain is the regulation of the complex whole body energy metabolism. The Selfish Brain Theory identifies the priority of brain energy supply in the competition for available energy resources within the organism. Here, we review mathematical models of the human energy metabolism supporting central aspects of the Selfish Brain Theory. First, we present a dynamical system modeling the whole body energy metabolism. This model takes into account the two central control mechanisms of the brain, i.e., allocation and appetite. Moreover, we present mathematical models of regulatory subsystems. We examine a neuronal model which specifies potential elements of the brain to sense and regulate cerebral energy content. We investigate a model of the HPA system regulating the allocation of energy within the organism. Finally, we present a robust modeling approach of appetite regulation. All models account for a systemic understanding of the human energy metabolism and thus do shed light onto defects causing metabolic diseases.

  17. Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

    Energy Technology Data Exchange (ETDEWEB)

    Santarius, Tilman, E-mail: tilman@santarius.de [Visiting Scholar, Institute of European Studies and Energy and Resources Group, University of California, Berkeley, 310 Barrows Hall, Berkeley, CA 94720-3050 (United States)

    2015-03-30

    Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may ‘eat up’ parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential ‘psychological rebound effects.’ It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough “rule of thumb”, in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

  18. Energy efficiency, human behavior, and economic growth: Challenges to cutting energy demand to sustainable levels

    Science.gov (United States)

    Santarius, Tilman

    2015-03-01

    Increasing energy efficiency in households, transportation, industries, and services is an important strategy to reduce energy service demand to levels that allow the steep reduction of greenhouse gases, and a full fledged switch of energy systems to a renewable basis. Yet, technological efficiency improvements may generate so-called rebound effects, which may `eat up' parts of the technical savings potential. This article provides a comprehensive review of existing research on these effects, raises critiques, and points out open questions. It introduces micro-economic rebound effect and suggests extending consumer-side analysis to incorporate potential `psychological rebound effects.' It then discusses meso-economic rebound effects, i.e. producer-side and market-level rebounds, which so far have achieved little attention in the literature. Finally, the article critically reviews evidence for macro-economic rebound effects as energy efficiency-induced economic growth impacts. For all three categories, the article summarizes assessments of their potential quantitative scope, while pointing out remaining methodological weaknesses and open questions. As a rough "rule of thumb", in the long term and on gross average, only half the technical savings potential of across-the-board efficiency improvements may actually be achieved in the real world. Policies that aim at cutting energy service demand to sustainable levels are well advised to take due note of detrimental behavioral and economic growth impacts, and should foster policies and measures that can contain them.

  19. Effects of robotic knee exoskeleton on human energy expenditure.

    Science.gov (United States)

    Gams, Andrej; Petric, Tadej; Debevec, Tadej; Babic, Jan

    2013-06-01

    A number of studies discuss the design and control of various exoskeleton mechanisms, yet relatively few address the effect on the energy expenditure of the user. In this paper, we discuss the effect of a performance augmenting exoskeleton on the metabolic cost of an able-bodied user/pilot during periodic squatting. We investigated whether an exoskeleton device will significantly reduce the metabolic cost and what is the influence of the chosen device control strategy. By measuring oxygen consumption, minute ventilation, heart rate, blood oxygenation, and muscle EMG during 5-min squatting series, at one squat every 2 s, we show the effects of using a prototype robotic knee exoskeleton under three different noninvasive control approaches: gravity compensation approach, position-based approach, and a novel oscillator-based approach. The latter proposes a novel control that ensures synchronization of the device and the user. Statistically significant decrease in physiological responses can be observed when using the robotic knee exoskeleton under gravity compensation and oscillator-based control. On the other hand, the effects of position-based control were not significant in all parameters although all approaches significantly reduced the energy expenditure during squatting.

  20. Mechanistic modeling of aberrant energy metabolism in human disease

    Directory of Open Access Journals (Sweden)

    Vineet eSangar

    2012-10-01

    Full Text Available Dysfunction in energy metabolism—including in pathways localized to the mitochondria—has been implicated in the pathogenesis of a wide array of disorders, ranging from cancer to neurodegenerative diseases to type II diabetes. The inherent complexities of energy and mitochondrial metabolism present a significant obstacle in the effort to understand the role that these molecular processes play in the development of disease. To help unravel these complexities, systems biology methods have been applied to develop an array of computational metabolic models, ranging from mitochondria-specific processes to genome-scale cellular networks. These constraint-based models can efficiently simulate aspects of normal and aberrant metabolism in various genetic and environmental conditions. Development of these models leverages—and also provides a powerful means to integrate and interpret—information from a wide range of sources including genomics, proteomics, metabolomics, and enzyme kinetics. Here, we review a variety of mechanistic modeling studies that explore metabolic functions, deficiency disorders, and aberrant biochemical pathways in mitochondria and related regions in the cell.

  1. Market analysis, energy savings potential, and future development requirements for Radiance. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-01

    The Department of Energy (DOE) Office of Conservation and Renewable Energy (CE), Building Equipment Division has funded the development of a sophisticated computer rendering program called Radiance at Lawrence Berkeley Laboratories (LBL). The project review study included: (1) Surveys of the lighting profession to determine how designers would use an improved, user-friendly Radiance, (2) Elucidation of features, including how Radiance could be used to save energy, which could be incorporated into Radiance to facilitate its more widespread use, (3) Outline of a development plan and determination of what costs the DOE might incur if it were to proceed with the development of an improved version, and (4) Weighing the anticipated development costs against anticipated energy-saving benefits.

  2. Data on examining the role of human capital in the energy-growth nexus across countries

    Directory of Open Access Journals (Sweden)

    Zheng Fang

    2016-12-01

    Full Text Available This article describes two publicly available data sources: the new generation of Penn World Table (www.ggdc.net/pwt and the BP Statistical Review of World Energy (http://www.bp.com/statisticalreview which can be used to examine the role of human capital in the energy-growth nexus across countries. The critical human capital measure across countries is for the first time made available in the Penn World Table 8.0 and it enables empirical researchers to conduct cross-country analysis involving human capital much easily than ever before.

  3. Data on examining the role of human capital in the energy-growth nexus across countries.

    Science.gov (United States)

    Fang, Zheng

    2016-12-01

    This article describes two publicly available data sources: the new generation of Penn World Table (www.ggdc.net/pwt) and the BP Statistical Review of World Energy (http://www.bp.com/statisticalreview) which can be used to examine the role of human capital in the energy-growth nexus across countries. The critical human capital measure across countries is for the first time made available in the Penn World Table 8.0 and it enables empirical researchers to conduct cross-country analysis involving human capital much easily than ever before.

  4. A cautionary approach in transitioning to 'green' energy technologies and practices is required.

    Science.gov (United States)

    Matatiele, Puleng; Gulumian, Mary

    2016-06-01

    Renewable energy technologies (wind turbines, solar cells, biofuels, etc.) are often referred to as 'clean' or 'green' energy sources, while jobs linked to the field of environmental protection and energy efficiency are referred to as 'green' jobs. The energy efficiency of clean technologies, which is likely to reduce and/or eliminate reliance on fossil fuels, is acknowledged. However, the potential contribution of green technologies and associated practices to ill health and environmental pollution resulting from consumption of energy and raw materials, generation of waste, and the negative impacts related to some life cycle phases of these technologies are discussed. Similarly, a point is made that the green jobs theme is mistakenly oversold because the employment opportunities generated by transitioning to green technologies are not necessarily safe and healthy jobs. Emphasis is put on identifying the hazards associated with these green designs, assessing the risks to the environment and worker health and safety, and either eliminating the hazards or minimizing the risks as essential elements to the design, construction, operation, and maintenance of green technologies. The perception that it is not always economically possible to consider all risk factors associated with renewable energy technologies at the beginning without hampering their implementation, especially in the poor developing countries, is dismissed. Instead, poor countries are encouraged to start implementing environmentally sound practices while transitioning to green technologies in line with their technological development and overall economic growth.

  5. A survey on human behavior towards energy saving for office worker in Malaysia

    Science.gov (United States)

    Mustafa, Nur Hanim; Husain, Mohd Nor; Aziz, Mohamad Zoinol Abidin Abdul; Othman, Mohd Azlishah; Malek, Fared

    2015-05-01

    Green environment is a space and energy efficient household, which can offer coziness and healthy living environment to its occupants. Human behavior is focuses to see the impact toward energy and also into green building. This probe can be taken in if everybody reads and share similar objectives in bringing off the energy in an efficient manner. This paper will present and watched over the survey feedback on energy usage by federal agency workers in Malaysia. The study will focus on the proletarians in the government sector since this population is the majority work in place. It is authoritative to present and support the tested data for a project doing, particularly connected to human existence. The matter is referred to discussing about human behavior to compare with the real situation information. Today, there are many researchers thought that the human activity as the primary ingredient for a monitoring arrangement. As a consequence, the energy monitoring system will improve the energy usage efficiency of the basic human actions in different places and surroundings.

  6. DNA and Protein Requirements for Substrate Conformational Changes Necessary for Human Flap Endonuclease-1-catalyzed Reaction.

    Science.gov (United States)

    Algasaier, Sana I; Exell, Jack C; Bennet, Ian A; Thompson, Mark J; Gotham, Victoria J B; Shaw, Steven J; Craggs, Timothy D; Finger, L David; Grasby, Jane A

    2016-04-08

    Human flap endonuclease-1 (hFEN1) catalyzes the essential removal of single-stranded flaps arising at DNA junctions during replication and repair processes. hFEN1 biological function must be precisely controlled, and consequently, the protein relies on a combination of protein and substrate conformational changes as a prerequisite for reaction. These include substrate bending at the duplex-duplex junction and transfer of unpaired reacting duplex end into the active site. When present, 5'-flaps are thought to thread under the helical cap, limiting reaction to flaps with free 5'-terminiin vivo Here we monitored DNA bending by FRET and DNA unpairing using 2-aminopurine exciton pair CD to determine the DNA and protein requirements for these substrate conformational changes. Binding of DNA to hFEN1 in a bent conformation occurred independently of 5'-flap accommodation and did not require active site metal ions or the presence of conserved active site residues. More stringent requirements exist for transfer of the substrate to the active site. Placement of the scissile phosphate diester in the active site required the presence of divalent metal ions, a free 5'-flap (if present), a Watson-Crick base pair at the terminus of the reacting duplex, and the intact secondary structure of the enzyme helical cap. Optimal positioning of the scissile phosphate additionally required active site conserved residues Tyr(40), Asp(181), and Arg(100)and a reacting duplex 5'-phosphate. These studies suggest a FEN1 reaction mechanism where junctions are bound and 5'-flaps are threaded (when present), and finally the substrate is transferred onto active site metals initiating cleavage.

  7. Comparison on Human Resource Requirement between Manual and Automated Dispensing Systems.

    Science.gov (United States)

    Noparatayaporn, Prapaporn; Sakulbumrungsil, Rungpetch; Thaweethamcharoen, Tanita; Sangseenil, Wunwisa

    2017-05-01

    This study was conducted to compare human resource requirement among manual, automated, and modified automated dispensing systems. Data were collected from the pharmacy department at the 2100-bed university hospital (Siriraj Hospital, Bangkok, Thailand). Data regarding the duration of the medication distribution process were collected by using self-reported forms for 1 month. The data on the automated dispensing machine (ADM) system were obtained from 1 piloted inpatient ward, whereas those on the manual system were the average of other wards. Data on dispensing, returned unused medication, and stock management processes under the traditional manual system and the ADM system were from actual activities, whereas the modified ADM system was modeled. The full-time equivalent (FTE) of each model was estimated for comparison. The result showed that the manual system required 46.84 FTEs of pharmacists and 132.66 FTEs of pharmacy technicians. By adding pharmacist roles on screening and verification under the ADM system, the ADM system required 117.61 FTEs of pharmacists. Replacing counting and filling medication functions by ADM has decreased the number of pharmacy technicians to 55.38 FTEs. After the modified ADM system canceled the return unused medication process, FTEs requirement for pharmacists and pharmacy technicians decreased to 69.78 and 51.90 FTEs, respectively. The ADM system decreased the workload of pharmacy technicians, whereas it required more time from pharmacists. However, the increased workload of pharmacists was associated with more comprehensive patient care functions, which resulted from the redesigned work process. Copyright © 2017. Published by Elsevier Inc.

  8. [Regulatory requirements regarding cell-based medicinal products for human and veterinary use - a comparison].

    Science.gov (United States)

    Kuhlmann-Gottke, Johanna; Duchow, Karin

    2015-11-01

    At present, there is no separate regulatory framework for cell-based medicinal products (CBMP) for veterinary use at the European or German level. Current European and national regulations exclusively apply to the corresponding medicinal products for human use. An increasing number of requests for the regulatory classification of CBMP for veterinary use, such as allogeneic stem cell preparations and dendritic cell-based autologous tumour vaccines, and a rise in scientific advice for companies developing these products, illustrate the need for adequate legislation. Currently, advice is given and decisions are made on a case-by-case basis regarding the regulatory classification and authorisation requirements.Since some of the CBMP - in particular in the area of stem-cell products - are developed in parallel for human and veterinary use, there is an urgent need to create specific legal definitions, regulations, and guidelines for these complex innovative products in the veterinary sector as well. Otherwise, there is a risk that that the current legal grey area regarding veterinary medicinal products will impede therapeutic innovations in the long run. A harmonised EU-wide approach is desirable. Currently the European legislation on veterinary medicinal products is under revision. In this context, veterinary therapeutics based on allogeneic cells and tissues will be defined and regulated. Certainly, the legal framework does not have to be as comprehensive as for human CBMP; a leaner solution is conceivable, similar to the special provisions for advanced-therapy medicinal products laid down in the German Medicines Act.

  9. Estimated financial and human resources requirements for the treatment of malaria in Malawi

    Directory of Open Access Journals (Sweden)

    Rudatsikira Emmanuel

    2007-12-01

    Full Text Available Abstract Background Malaria fever is a common medical presentation and diagnosis in Malawi. The national malaria policy supports self-diagnosis and self-medication for uncomplicated malaria with first line anti-malaria drugs. While a qualitative appreciation of the burden of malaria on the health system is recognized, there is limited quantitative estimation of the burden malaria exacts on the health system, especially with regard to human resources and financial burden on Malawi. Methods The burden of malaria was assessed based on estimated incidence rates for a high endemic country of which Malawi is one. Data on the available human resources and financial resources committed towards malaria from official Malawi government documents and programme reports were obtained. The amount of human and financial resources that would be required to treat 65% or 85% of symptomatic malaria cases as per the Roll Back Malaria partnership and the US President's Malaria Initiative targets. Results Based on a malaria incidence rate of 1.4 episodes per year per person it was estimated that there would be 3.71 million symptomatic episodes of malaria among children Conclusion Malaria exacts a heavy toll on the health system in Malawi. The national recommendation of self-medication with first-line drug for uncomplicated malaria is justified as there are not enough clinicians to provide clinical care for all cases. The Malawi Ministry of Health's promotion of malaria drug prescription including other lower cadre health workers may be justified.

  10. Energy efficiency as a unifying principle for human, environmental, and global health.

    Science.gov (United States)

    Fontana, Luigi; Atella, Vincenzo; Kammen, Daniel M

    2013-01-01

    A strong analogy exists between over/under consumption of energy at the level of the human body and of the industrial metabolism of humanity. Both forms of energy consumption have profound implications for human, environmental, and global health. Globally, excessive fossil-fuel consumption, and individually, excessive food energy consumption are both responsible for a series of interrelated detrimental effects, including global warming, extreme weather conditions, damage to ecosystems, loss of biodiversity, widespread pollution, obesity, cancer, chronic respiratory disease, and other lethal chronic diseases. In contrast, data show that the efficient use of energy-in the form of food as well as fossil fuels and other resources-is vital for promoting human, environmental, and planetary health and sustainable economic development. While it is not new to highlight how efficient use of energy and food can address some of the key problems our world is facing, little research and no unifying framework exists to harmonize these concepts of sustainable system management across diverse scientific fields into a single theoretical body. Insights beyond reductionist views of efficiency are needed to encourage integrated changes in the use of the world's natural resources, with the aim of achieving a wiser use of energy, better farming systems, and healthier dietary habits. This perspective highlights a range of scientific-based opportunities for cost-effective pro-growth and pro-health policies while using less energy and natural resources.

  11. MODELING ENERGY EXPENDITURE AND OXYGEN CONSUMPTION IN HUMAN EXPOSURE MODELS: ACCOUNTING FOR FATIGUE AND EPOC

    Science.gov (United States)

    Human exposure and dose models often require a quantification of oxygen consumption for a simulated individual. Oxygen consumption is dependent on the modeled Individual's physical activity level as described in an activity diary. Activity level is quantified via standardized val...

  12. MODELING ENERGY EXPENDITURE AND OXYGEN CONSUMPTION IN HUMAN EXPOSURE MODELS: ACCOUNTING FOR FATIGUE AND EPOC

    Science.gov (United States)

    Human exposure and dose models often require a quantification of oxygen consumption for a simulated individual. Oxygen consumption is dependent on the modeled Individual's physical activity level as described in an activity diary. Activity level is quantified via standardized val...

  13. Energy Autonomous Wireless Sensing System Enabled by Energy Generated during Human Walking

    Science.gov (United States)

    Kuang, Yang; Ruan, Tingwen; Chew, Zheng Jun; Zhu, Meiling

    2016-11-01

    Recently, there has been a huge amount of work devoted to wearable energy harvesting (WEH) in a bid to establish energy autonomous wireless sensing systems for a range of health monitoring applications. However, limited work has been performed to implement and test such systems in real-world settings. This paper reports the development and real-world characterisation of a magnetically plucked wearable knee-joint energy harvester (Mag-WKEH) powered wireless sensing system, which integrates our latest research progresses in WEH, power conditioning and wireless sensing to achieve high energy efficiency. Experimental results demonstrate that with walking speeds of 3∼7 km/h, the Mag-WKEH generates average power of 1.9∼4.5 mW with unnoticeable impact on the wearer and is able to power the wireless sensor node (WSN) with three sensors to work at duty cycles of 6.6%∼13%. In each active period of 2 s, the WSN is able to measure and transmit 482 readings to the base station.

  14. Exogenous recombinant human growth hormone effects during suboptimal energy and zinc intake

    Directory of Open Access Journals (Sweden)

    Duro Debora

    2005-04-01

    Full Text Available Abstract Background Energy and Zinc (Zn deficiencies have been associated with nutritional related growth retardation as well as growth hormone (GH resistance. In this study, the relationship between suboptimal energy and/or Zn intake and growth in rats and their response to immunoreactive exogenous recombinant human GH (GHi, was determined. Results Rats treated with GHi and fed ad-libitum energy and Zn (100/100 had increased IGFBP-3 (p Conclusion These results suggest that GHi enhances weight gain in rats with suboptimal energy and Zn intake but does not modify energy expenditure or physical activity index. Suboptimal Zn intake did not exacerbate the reduced growth or decrease in energy expenditure observed with energy restriction.

  15. miRNA signature and Dicer requirement during human endometrial stromal decidualization in vitro.

    Directory of Open Access Journals (Sweden)

    Carlos Estella

    Full Text Available Decidualization is a morphological and biochemical transformation of endometrial stromal fibroblast into differentiated decidual cells, which is critical for embryo implantation and pregnancy establishment. The complex regulatory networks have been elucidated at both the transcriptome and the proteome levels, however very little is known about the post-transcriptional regulation of this process. miRNAs regulate multiple physiological pathways and their de-regulation is associated with human disorders including gynaecological conditions such as endometriosis and preeclampsia. In this study we profile the miRNAs expression throughout human endometrial stromal (hESCs decidualization and analyze the requirement of the miRNA biogenesis enzyme Dicer during this process. A total of 26 miRNAs were upregulated and 17 miRNAs downregulated in decidualized hESCs compared to non-decidualized hESCs. Three miRNAs families, miR-181, miR-183 and miR-200, are down-regulated during the decidualization process. Using miRNAs target prediction algorithms we have identified the potential targets and pathways regulated by these miRNAs. The knockdown of Dicer has a minor effect on hESCs during in vitro decidualization. We have analyzed a battery of decidualization markers such as cell morphology, Prolactin, IGFBP-1, MPIF-1 and TIMP-3 secretion as well as HOXA10, COX2, SP1, C/EBPß and FOXO1 expression in decidualized hESCs with decreased Dicer function. We found decreased levels of HOXA10 and altered intracellular organization of actin filaments in Dicer knockdown decidualized hESCs compared to control. Our results provide the miRNA signature of hESC during the decidualization process in vitro. We also provide the first functional characterization of Dicer during human endometrial decidualization although surprisingly we found that Dicer plays a minor role regulating this process suggesting that alternative biogenesis miRNAs pathways must be involved in human

  16. miRNA Signature and Dicer Requirement during Human Endometrial Stromal Decidualization In Vitro

    Science.gov (United States)

    Estella, Carlos; Herrer, Isabel; Moreno-Moya, Juan Manuel; Quiñonero, Alicia; Martínez, Sebastián; Pellicer, Antonio; Simón, Carlos

    2012-01-01

    Decidualization is a morphological and biochemical transformation of endometrial stromal fibroblast into differentiated decidual cells, which is critical for embryo implantation and pregnancy establishment. The complex regulatory networks have been elucidated at both the transcriptome and the proteome levels, however very little is known about the post-transcriptional regulation of this process. miRNAs regulate multiple physiological pathways and their de-regulation is associated with human disorders including gynaecological conditions such as endometriosis and preeclampsia. In this study we profile the miRNAs expression throughout human endometrial stromal (hESCs) decidualization and analyze the requirement of the miRNA biogenesis enzyme Dicer during this process. A total of 26 miRNAs were upregulated and 17 miRNAs downregulated in decidualized hESCs compared to non-decidualized hESCs. Three miRNAs families, miR-181, miR-183 and miR-200, are down-regulated during the decidualization process. Using miRNAs target prediction algorithms we have identified the potential targets and pathways regulated by these miRNAs. The knockdown of Dicer has a minor effect on hESCs during in vitro decidualization. We have analyzed a battery of decidualization markers such as cell morphology, Prolactin, IGFBP-1, MPIF-1 and TIMP-3 secretion as well as HOXA10, COX2, SP1, C/EBPß and FOXO1 expression in decidualized hESCs with decreased Dicer function. We found decreased levels of HOXA10 and altered intracellular organization of actin filaments in Dicer knockdown decidualized hESCs compared to control. Our results provide the miRNA signature of hESC during the decidualization process in vitro. We also provide the first functional characterization of Dicer during human endometrial decidualization although surprisingly we found that Dicer plays a minor role regulating this process suggesting that alternative biogenesis miRNAs pathways must be involved in human endometrial decidualization

  17. 40-Hz square-wave stimulation requires less energy to produce muscle contraction: compared with the TASER® X26 conducted energy weapon.

    Science.gov (United States)

    Comeaux, James A; Jauchem, James R; Cox, D Duane; Crane, Carrie C; D'Andrea, John A

    2013-07-01

    Conducted energy weapons (CEWs) (including the Advanced TASER(®) X26 model produced by TASER International, Inc.) incapacitate individuals by causing muscle contractions. In this study using anesthetized swine, the potential incapacitating effect of primarily monophasic, 19-Hz voltage imposed by the commercial CEW was compared with the effect of voltages imposed by a laboratory device that created 40-Hz square waves. Forces of muscle contraction were measured with the use of strain gauges. Stimulation with 40-Hz square waves required less pulse energy than stimulation with the commercial CEW to produce similar muscle contraction. The square-pulse stimulation, at the higher repetition rate, caused a more complete tetanus at a lower energy. Use of such a simple shape of waveform may be used to make future nonlethal weapon devices more efficient.

  18. Metabolomics analysis of Cistus monspeliensis leaf extract on energy metabolism activation in human intestinal cells.

    Science.gov (United States)

    Shimoda, Yoichi; Han, Junkyu; Kawada, Kiyokazu; Smaoui, Abderrazak; Isoda, Hiroko

    2012-01-01

    Energy metabolism is a very important process to improve and maintain health from the point of view of physiology. It is well known that the intracellular ATP production is contributed to energy metabolism in cells. Cistus monspeliensis is widely used as tea, spices, and medical herb; however, it has not been focusing on the activation of energy metabolism. In this study, C. monspeliensis was investigated as the food resources by activation of energy metabolism in human intestinal epithelial cells. C. monspeliensis extract showed high antioxidant ability. In addition, the promotion of metabolites of glycolysis and TCA cycle was induced by C. monspeliensis treatment. These results suggest that C. monspeliensis extract has an ability to enhance the energy metabolism in human intestinal cells.

  19. Metabolomics Analysis of Cistus monspeliensis Leaf Extract on Energy Metabolism Activation in Human Intestinal Cells

    Directory of Open Access Journals (Sweden)

    Yoichi Shimoda

    2012-01-01

    Full Text Available Energy metabolism is a very important process to improve and maintain health from the point of view of physiology. It is well known that the intracellular ATP production is contributed to energy metabolism in cells. Cistus monspeliensis is widely used as tea, spices, and medical herb; however, it has not been focusing on the activation of energy metabolism. In this study, C. monspeliensis was investigated as the food resources by activation of energy metabolism in human intestinal epithelial cells. C. monspeliensis extract showed high antioxidant ability. In addition, the promotion of metabolites of glycolysis and TCA cycle was induced by C. monspeliensis treatment. These results suggest that C. monspeliensis extract has an ability to enhance the energy metabolism in human intestinal cells.

  20. Principles for Nearly Zero-energy Buildings. Paving the way for effective implementation of policy requirements

    Energy Technology Data Exchange (ETDEWEB)

    Boermans, T.; Hermelink, A.; Schimschar, S.; Groezinger, J.; Offermann, M. [Ecofys Germany, Berlin (Germany); Engelund Thomsen, K.; Rose, J.; Aggerholm, S.O. [Danish Building Research Institute SBi, Aalborg University, Hoersholm (Denmark)

    2011-11-15

    The overarching objective of this study is to contribute to a common and cross-national understanding on: an ambitious, clear definition and fast uptake of nearly Zero-Energy Buildings (nZEB) in all EU Member States; principles of sustainable, realistic nearly Zero-Energy Buildings, both new and existing; possible technical solutions and their implications for national building markets, buildings and market players. The study builds on existing concepts and building standards, analyses the main methodological challenges and their implications for the nZEB definition, and compiles a possible set of principles and assesses their impact on reference buildings. Subsequently the technological, financial and policy implications of these results are evaluated. Finally, the study concludes by providing an outlook on necessary further steps towards a successful implementation of nearly Zero-Energy Buildings.

  1. Energy requirements for CO2 capture from ambient air (DAC) competitive with capture from flue-gas (PCC)

    Science.gov (United States)

    Meinrenken, Christoph

    2015-03-01

    Capture of CO2, whether from a flue gas source (PCC) or from distributed sources via ambient air (DAC), is a key enabling technology to provide carbon for sustainable synthetic energy carriers such as solar fuels. Based on thermodynamic minimum considerations, DAC is often expected to require about 3 times more energy (per ton CO2 captured) than PCC because CO2 in ambient air is more dilute. Here, we calculate the energy required for a humidity swing-based DAC installation that uses an anionic exchange resin as sorbent. The calculation uses recently measured equilibrium CO2 loadings of the sorbent as function of partial CO2 pressure, temperature, and humidity. We calculate the installation's electricity consumption to be about 45 kJ per mole of pure CO2 at 1 bar (scenario-dependent). Furthermore, we estimate the amount of heat provided by ambient air and thus provide context of the overall energy and entropy balance and thermodynamic minimum views. The electricity consumption is competitive with typical parasitic loads of PCC-equipped coal-fired power plants (40-50 kJ per mole at same pressure) and significantly lower than predicted for other DAC installations such as Na(OH) sorbent-based systems. Our analyses elucidate why DAC is not always more energy-intensive that PCC, thus alleviating often cited concerns of significant cost impediments. Financial support by ABB for research presented herein is gratefully acknowledged.

  2. Chapter 2: International Requirements for Large Integration of Renewable Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    Molina-Garcia, A.; Hansen, A. D.; Muljadi, Eduard; Gevorgian, Vahan; Fortmann, J.; Gomez-Lazaro, E.

    2017-03-01

    Most European countries have concerns about the integration of large amounts of renewable energy sources (RES) into electric power systems, and this is currently a topic of growing interest. In January 2008, the European Commission published the 2020 package, which proposes committing the European Union to a 20% reduction in greenhouse gas emissions, to achieve a target of deriving 20% of the European Union's final energy consumption from renewable sources, and to achieve 20% improvement in energy efficiency both by the year 2020 [1]. Member states have different individual goals to meet these overall objectives, and they each need to provide a detailed roadmap describing how they will meet these legally binding targets [2]. At this time, RES are an indispensable part of the global energy mix, which has been partially motivated by the continuous increases in hydropower as well as the rapid expansion of wind and solar photovoltaic (PV). The International Energy Agency's 2012 edition of the World Energy Outlook stated that the rapid increases in RES integration are underpinned by falling technology costs as well as rising fossilfuel prices and carbon pricing, but RES integration is also encouraged by continued subsidies: from $88 billion globally in 2011 (compared to $523 billion in fossil-fuel subsidies in 2012 [3], with a share of $131 billion for electricity generation) to an estimated $240 billion in 2035 [4]. According to [3], in 2015 RES accounted for 22% of electricity generation, which was approximately the same level as gas and about one-half the level of coal.

  3. Preterm Human Milk Macronutrient and Energy Composition: A Systematic Review and Meta-Analysis.

    Science.gov (United States)

    Mimouni, Francis B; Lubetzky, Ronit; Yochpaz, Sivan; Mandel, Dror

    2017-03-01

    This study is a systematic review of the macronutrient and energy composition of preterm human milk to enable the practicing neonatologist to make informed nutritional decisions in preterm infants. Meta-analyses were conducted in all the studies that reported total energy, true protein, fat, and lactose. Protein content decreased massively (by one-half) and significantly from day 1 to 3 at week 10 to 12. There was a significant linear increase in fat, lactose, and energy content during the same timeframe. Theoretic calculations on energy and macronutrient intake of preterm infants must be made according to a lactation time-specific manner. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Determining required valve performance for discrete control of PTO cylinders for wave energy

    DEFF Research Database (Denmark)

    Hansen, Rico Hjerm; Andersen, Torben Ole; Pedersen, Henrik C.

    2012-01-01

    Within wave energy a large challenge remains in designing a Power Take-Off (PTO) system capable of converting the slow oscillations induced by waves into electricity. Fluid power is an essential part of most PTO-concepts. To implement an efficient control of the load force produced by a cylinder...... on a floating body, throttle-less force control by discrete variation of the effective cylinder area has been investigated and found feasible for the Wavestar wave energy concept. However, the feasibility study assumes adequate valve performance, such that only the compression loss remains. This paper...

  5. Topology, structures, and energy landscapes of human chromosomes.

    Science.gov (United States)

    Zhang, Bin; Wolynes, Peter G

    2015-05-12

    Chromosome conformation capture experiments provide a rich set of data concerning the spatial organization of the genome. We use these data along with a maximum entropy approach to derive a least-biased effective energy landscape for the chromosome. Simulations of the ensemble of chromosome conformations based on the resulting information theoretic landscape not only accurately reproduce experimental contact probabilities, but also provide a picture of chromosome dynamics and topology. The topology of the simulated chromosomes is probed by computing the distribution of their knot invariants. The simulated chromosome structures are largely free of knots. Topologically associating domains are shown to be crucial for establishing these knotless structures. The simulated chromosome conformations exhibit a tendency to form fibril-like structures like those observed via light microscopy. The topologically associating domains of the interphase chromosome exhibit multistability with varying liquid crystalline ordering that may allow discrete unfolding events and the landscape is locally funneled toward "ideal" chromosome structures that represent hierarchical fibrils of fibrils.

  6. Energy expenditure, sex, and endogenous fuel availability in humans

    Science.gov (United States)

    Nielsen, Søren; Guo, ZengKui; Albu, Jeanine B.; Klein, Samuel; O’Brien, Peter C.; Jensen, Michael D.

    2003-01-01

    Adipose tissue lipolysis supplies circulating FFAs, which largely meet lipid fuel needs; however, excess FFAs, can contribute to the adverse health consequences of obesity. Because “normal” FFA release has not been well defined, average (mean of 4 days) basal FFA release and its potential regulation factors were measured in 50 lean and obese adults (25 women). Resting energy expenditure (REE), but not body composition, predicted most of the interindividual variation in FFA release. There was a significant, positive linear relationship between palmitate release and REE; however, women released approximately 40% more FFA than men relative to REE. Neither plasma palmitate concentrations nor respiratory quotient by indirect calorimetry differed between men and women. Glucose release rates were not different in men and women whether related to REE or fat free mass. These findings indicate that nonoxidative FFA clearance is greater in women than in men. This could be an advantage at times of increased fuel needs. We conclude that “normal” adipose tissue lipolysis is different in men and women and that the fuel export role of adipose tissue in obesity will need to be reassessed. PMID:12671047

  7. Endogenous laminin is required for human airway smooth muscle cell maturation

    Directory of Open Access Journals (Sweden)

    Tran Thai

    2006-09-01

    Full Text Available Abstract Background Airway smooth muscle (ASM contraction underlies acute bronchospasm in asthma. ASM cells can switch between a synthetic-proliferative phenotype and a contractile phenotype. While the effects of extracellular matrix (ECM components on modulation of ASM cells to a synthetic phenotype have been reported, the role of ECM components on maturation of ASM cells to a contractile phenotype in adult lung is unclear. As both changes in ECM components and accumulation of contractile ASM are features of airway wall remodelling in asthma, we examined the role of the ECM protein, laminin, in the maturation of contractile phenotype in human ASM cells. Methods Human ASM cells were made senescence-resistant by stable expression of human telomerase reverse transcriptase. Maturation to a contractile phenotype was induced by 7-day serum deprivation, as assessed by immunoblotting for desmin and calponin. The role of laminin on ASM maturation was investigated by comparing the effects of exogenous laminin coated on culture plates, and of soluble laminin peptide competitors. Endogenous expression of laminin chains during ASM maturation was also measured. Results Myocyte binding to endogenously expressed laminin was required for ASM phenotype maturation, as laminin competing peptides (YIGSR or GRGDSP significantly reduced desmin and calponin protein accumulation that otherwise occurs with prolonged serum deprivation. Coating of plastic cell culture dishes with different purified laminin preparations was not sufficient to further promote accumulation of desmin or calponin during 7-day serum deprivation. Expression of α2, β1 and γ1 laminin chains by ASM cells was specifically up-regulated during myocyte maturation, suggesting a key role for laminin-2 in the development of the contractile phenotype. Conclusion While earlier reports suggest exogenously applied laminin slows the spontaneous modulation of ASM to a synthetic phenotype, we show for the

  8. Analysis of the thermal energy requirements for the extraction of leaf protein concentrate from some green plants

    Energy Technology Data Exchange (ETDEWEB)

    Tangka, Julius K. [Dschang Univ., Dept. of Agricultural Engineering, Dschang (Cameroon)

    2003-12-01

    Extraction of protein from the leaves of green plants is very important because of the high cost of conventional forms of protein such as meat, milk and fish. In order to design machinery for this extraction, and also to embark on leaf protein concentrate extraction, it is necessary to measure and analyse the energy requirements to carry out each process involved in the extraction, using different plant species. Experiments were carried out to determine the amount of crude protein, and the thermal energy required to extract leaf protein concentrate, from juices obtained from the leaves of some plant species. Leaves from the following plants were selected: cassava (Manihot esculanta), Siam weed (Chromolaena odorata), bitter leaf (Vernonia amygdalina), gliricidia (Gliricidia maculata) and thorny tree (Hura crepetans). The leaves from the plant species were macerated in a laboratory pulper. Juice was obtained from the samples using perforated cylinders and a hydraulic press. The specific heat capacity of the juices was determined using the cooling curve method. The values of the heat capacities were used to calculate the amount of thermal energy required to raise the temperature of each juice from its normal temperature of about 25 deg C to a total protein coagulation temperature of about 80 deg C. The crude protein content of the extract was determined using the Kjeldal method. Results indicate that the green coagulum extracted from all the juices all have a protein content of at least 37%. The thermal energy required to coagulate protein from the juices ranges from 1.59 kJ kg{sup -1} for Hura crepetans to 2.7 kJ kg{sup -1} for Vernonia amygdalina. The energy requirement to obtain crude protein (CP) ranges from 8 kJ kg{sup -1} [CP] with Bura crepetans to 182 kJ kg{sup -1} [CP] with Vernonia amygdalina. Both results are statistically significant at the 0.01 confidence interval. It is concluded that the choice of plant species can significantly lower the thermal energy

  9. Human resource requirements for quality-assured electronic data capture of the tuberculosis case register

    Directory of Open Access Journals (Sweden)

    Hoa Nguyen B

    2012-01-01

    Full Text Available Abstract Background The tuberculosis case register is the data source for the reports submitted by basic management units to the national tuberculosis program. Our objective was to measure the data entry time required to complete and double-enter one record, and to estimate the time for the correction of errors in the captured information from tuberculosis case registers in Cambodia and Viet Nam. This should assist in quantifying the additional requirements in human resources for national programs moving towards electronic recording and reporting. Methods Data from a representative sample of tuberculosis case registers from Cambodia and Viet Nam were double-entered and discordances resolved by rechecking the original case register. Computer-generated data entry time recorded the time elapsed between opening of a new record and saving it to disk. Results The dataset comprised 22,732 double-entered records of 11,366 patients (37.1% from Cambodia and 62.9% from Viet Nam. The mean data entry times per record were 97.5 (95% CI: 96.2-98.8 and 66.2 (95% CI: 59.5-73.0 seconds with medians of 90 and 31 s respectively in Cambodia and in Viet Nam. The percentage of records with an error was 6.0% and 39.0% respectively in Cambodia and Viet Nam. Data entry time was inversely associated with error frequency. We estimate that approximately 118-person-hours were required to produce 1,000 validated records. Conclusions This study quantifies differences between two countries for data entry time for the tuberculosis case register and frequencies of data entry errors and suggests that higher data entry speed is partially offset by requiring revisiting more records for corrections.

  10. Functional and operational requirements document : building 1012, Battery and Energy Storage Device Test Facility, Sandia National Laboratories, New Mexico.

    Energy Technology Data Exchange (ETDEWEB)

    Johns, William H.

    2013-11-01

    This report provides an overview of information, prior studies, and analyses relevant to the development of functional and operational requirements for electrochemical testing of batteries and energy storage devices carried out by Sandia Organization 2546, Advanced Power Sources R&D. Electrochemical operations for this group are scheduled to transition from Sandia Building 894 to a new Building located in Sandia TA-II referred to as Building 1012. This report also provides background on select design considerations and identifies the Safety Goals, Stakeholder Objectives, and Design Objectives required by the Sandia Design Team to develop the Performance Criteria necessary to the design of Building 1012. This document recognizes the Architecture-Engineering (A-E) Team as the primary design entity. Where safety considerations are identified, suggestions are provided to provide context for the corresponding operational requirement(s).

  11. Power and Energy Storage Requirements for Ship Integration of Solid-State Lasers on Naval Platforms

    Science.gov (United States)

    2016-06-01

    from the NAVAL POSTGRADUATE SCHOOL June 2016 Approved by: Joseph Blau Thesis Advisor Keith Cohn Co-Advisor Kevin ...the change in discrete energy levels is Δ, ℎ is Planks constant, is the frequency, is the wavelength and is the speed of light. The

  12. Energy recuperation in fully electric vehicles subject to stability and drivability requirements

    NARCIS (Netherlands)

    Ólafsdóttir, J.M.; Lidberg, M.; Falcone, P.; Iersel, S. van; Jansen, S.T.H.

    2012-01-01

    This paper presents a combined control and estimation framework for energy recuperation in fully electric vehicles. We consider a fully electric powertrain, with a driven front axle operating on low friction road surfaces. Our objective is to find the blending of regenerative and friction braking th

  13. Melanocortin 4 receptor is not required for estrogenic regulations on energy homeostasis and reproduction

    Science.gov (United States)

    Brain estrogen receptor-a (ERa) is essential for estrogenic regulation of energy homeostasis and reproduction. We previously showed that ERa expressed by pro-opiomelanocortin (POMC) neurons mediates estrogen's effects on food intake, body weight, negative regulation of hypothalamic–pituitary–gonadal...

  14. Energy requirements of household consumption : a case study of The Netherlands

    NARCIS (Netherlands)

    Biesiot, W; Noorman, K.J.

    This article describes the results of several research programmes that together aim at the development and application of methodologies that enable the study of long-term environmental effects (mainly related to the total household energy demand) of household consumption in relation to other

  15. Ubc9 Impairs Activation of the Brown Fat Energy Metabolism Program in Human White Adipocytes.

    Science.gov (United States)

    Hartig, Sean M; Bader, David A; Abadie, Kathleen V; Motamed, Massoud; Hamilton, Mark P; Long, Weiwen; York, Brian; Mueller, Michaela; Wagner, Martin; Trauner, Michael; Chan, Lawrence; Bajaj, Mandeep; Moore, David D; Mancini, Michael A; McGuire, Sean E

    2015-09-01

    Insulin resistance and type 2 diabetes mellitus (T2DM) result from an inability to efficiently store and catabolize surplus energy in adipose tissue. Subcutaneous adipocytes protect against insulin resistance and T2DM by coupling differentiation with the induction of brown fat gene programs for efficient energy metabolism. Mechanisms that disrupt these programs in adipocytes are currently poorly defined, but represent therapeutic targets for the treatment of T2DM. To gain insight into these mechanisms, we performed a high-throughput microscopy screen that identified ubiquitin carrier protein 9 (Ubc9) as a negative regulator of energy storage in human sc adipocytes. Ubc9 depletion enhanced energy storage and induced the brown fat gene program in human sc adipocytes. Induction of adipocyte differentiation resulted in decreased Ubc9 expression commensurate with increased brown fat gene expression. Thiazolidinedione treatment reduced the interaction between Ubc9 and peroxisome proliferator-activated receptor (PPAR)γ, suggesting a mechanism by which Ubc9 represses PPARγ activity. In support of this hypothesis, Ubc9 overexpression remodeled energy metabolism in human sc adipocytes by selectively inhibiting brown adipocyte-specific function. Further, Ubc9 overexpression decreased uncoupling protein 1 expression by disrupting PPARγ binding at a critical uncoupling protein 1 enhancer region. Last, Ubc9 is significantly elevated in sc adipose tissue isolated from mouse models of insulin resistance as well as diabetic and insulin-resistant humans. Taken together, our findings demonstrate a critical role for Ubc9 in the regulation of sc adipocyte energy homeostasis.

  16. Energy efficiency as a unifying principle for human, environmental, and global health

    Science.gov (United States)

    Fontana, Luigi; Atella, Vincenzo; Kammen, Daniel M

    2013-01-01

    A strong analogy exists between over/under consumption of energy at the level of the human body and of the industrial metabolism of humanity. Both forms of energy consumption have profound implications for human, environmental, and global health. Globally, excessive fossil-fuel consumption, and individually, excessive food energy consumption are both responsible for a series of interrelated detrimental effects, including global warming, extreme weather conditions, damage to ecosystems, loss of biodiversity, widespread pollution, obesity, cancer, chronic respiratory disease, and other lethal chronic diseases. In contrast, data show that the efficient use of energy—in the form of food as well as fossil fuels and other resources—is vital for promoting human, environmental, and planetary health and sustainable economic development. While it is not new to highlight how efficient use of energy and food can address some of the key problems our world is facing, little research and no unifying framework exists to harmonize these concepts of sustainable system management across diverse scientific fields into a single theoretical body. Insights beyond reductionist views of efficiency are needed to encourage integrated changes in the use of the world’s natural resources, with the aim of achieving a wiser use of energy, better farming systems, and healthier dietary habits. This perspective highlights a range of scientific-based opportunities for cost-effective pro-growth and pro-health policies while using less energy and natural resources. PMID:24555053

  17. Carbohydrate derived energy and gross energy absorption in preterm infants fed human milk or formula.

    OpenAIRE

    Curtis, M.; Senterre, J; Rigo, J; Putet, G.

    1986-01-01

    Significant production of breath hydrogen has been shown in premature infants, suggesting limited intestinal capacity for digestion of carbohydrate. To evaluate net absorption of carbohydrate 24 three day balance studies were carried out in seven preterm infants fed pasteurised banked human milk and in 17 preterm infants fed a formula containing 75% lactose and 25% glucose polymers. Because carbohydrate reaching the colon may be converted to organic acids by bacterial flora, carbohydrate net ...

  18. The Development of a Human Systems Simulation Laboratory at Idaho National Laoboratory: Progress, Requirements and Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    David I Gertman; Katya L. LeBlanc; William phoenix; Alan R Mecham

    2010-11-01

    Next generation nuclear power plants and digital upgrades to the existing nuclear fleet introduce potential human performance issues in the control room. Safe application of new technologies calls for a thorough understanding of how those technologies affect human performance and in turn, plant safety. In support of advancing human factors for small modular reactors and light water reactor sustainability, the Idaho National Laboratory (INL) has developed a reconfigurable simulation laboratory capable of testing human performance in multiple nuclear power plant (NPP) control room simulations. This paper discusses the laboratory infrastructure and capabilities, the laboratory’ s staffing requirements, lessons learned, and the researcher’s approach to measuring human performance in the simulation lab.

  19. ATM Kinase Is Required for Telomere Elongation in Mouse and Human Cells

    Directory of Open Access Journals (Sweden)

    Stella Suyong Lee

    2015-11-01

    Full Text Available Short telomeres induce a DNA damage response, senescence, and apoptosis, thus maintaining telomere length equilibrium is essential for cell viability. Telomerase addition of telomere repeats is tightly regulated in cells. To probe pathways that regulate telomere addition, we developed the ADDIT assay to measure new telomere addition at a single telomere in vivo. Sequence analysis showed telomerase-specific addition of repeats onto a new telomere occurred in just 48 hr. Using the ADDIT assay, we found that ATM is required for addition of new repeats onto telomeres in mouse cells. Evaluation of bulk telomeres, in both human and mouse cells, showed that blocking ATM inhibited telomere elongation. Finally, the activation of ATM through the inhibition of PARP1 resulted in increased telomere elongation, supporting the central role of the ATM pathway in regulating telomere addition. Understanding this role of ATM may yield new areas for possible therapeutic intervention in telomere-mediated disease.

  20. Step 1: Human System Integration (HSI) FY05 Pilot-Technology Interface Requirements for Command, Control, and Communications (C3)

    Science.gov (United States)

    2005-01-01

    The document provides the Human System Integration(HSI) high-level functional C3 HSI requirements for the interface to the pilot. Description includes (1) the information required by the pilot to have knowledge C3 system status, and (2) the control capability needed by the pilot to obtain C3 information. Fundamentally, these requirements provide the candidate C3 technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how C3 operations and functions should interface with the pilot to provide the necessary C3 functionality to the UA-pilot system. Requirements and guidelines for C3 are partitioned into three categories: (1) Pilot-Air Traffic Control (ATC) Voice Communications (2) Pilot-ATC Data Communications, and (3) command and control of the unmanned aircraft (UA). Each requirement is stated and is supported with a rationale and associated reference(s).

  1. Nuclear Factor kappa B is required for the production of infectious human herpesvirus 8 virions

    Directory of Open Access Journals (Sweden)

    Negin N Blattman

    2014-04-01

    Full Text Available Human herpesvirus 8 (HHV8 infection leads to potent activation of nuclear factor kappa B (NFB in primary and transformed cells. We used recombinant HHV8 (rKSHV.219 expressing green fluorescent protein under the constitutive cellular promoter elongation factor 2 and red fluorescent protein under an early HHV8 lytic gene promoter T1.1, to monitor replication during infection of human foreskin fibroblasts (HF, noting changes in NFB activity. In primary HF, NFB levels do not affect HHV8 ability to establish infection or maintain latency. Furthermore, there was no effect on the percent of cells undergoing reactivation from latency, and there were similar numbers of released and cell associated HHV8 viral particles following reactivation in the presence of inhibitors. Reactivation of HHV8 in latently infected HF in the presence of NFB inhibitors resulted in production of viral particles that did not efficiently establish infection, due to deficiencies in binding and/or entry into normally permissive cells. Exogenous expression of glycoprotein M, an envelope protein involved in viral binding and entry was able to partially overcome the deficiency induced by NFB inhibitors. Our data indicate that in primary cells, NFB is not required for infection, establishment of latency, or entry into the lytic cycle, but is required for the expression of virion associated genes involved in the initial steps of virion infectivity. These studies suggest that strategies to inhibit NFB may prevent HHV8 spread and should be considered as a potential therapeutic target for preventing HHV8 associated diseases.

  2. Energy Harvesting from the Animal/Human Body for Self-Powered Electronics.

    Science.gov (United States)

    Dagdeviren, Canan; Li, Zhou; Wang, Zhong Lin

    2017-06-21

    Living subjects (i.e., humans and animals) have abundant sources of energy in chemical, thermal, and mechanical forms. The use of these energies presents a viable way to overcome the battery capacity limitation that constrains the long-term operation of wearable/implantable devices. The intersection of novel materials and fabrication techniques offers boundless possibilities for the benefit of human health and well-being via various types of energy harvesters. This review summarizes the existing approaches that have been demonstrated to harvest energy from the bodies of living subjects for self-powered electronics. We present material choices, device layouts, and operation principles of these energy harvesters with a focus on in vivo applications. We discuss a broad range of energy harvesters placed in or on various body parts of human and animal models. We conclude with an outlook of future research in which the integration of various energy harvesters with advanced electronics can provide a new platform for the development of novel technologies for disease diagnostics, treatment, and prevention.

  3. On Early Conflict Identification by Requirements Modeling of Energy System Control Structures

    DEFF Research Database (Denmark)

    Heussen, Kai; Gehrke, Oliver; Niemann, Hans Henrik

    2015-01-01

    Control systems are purposeful systems involving goal-oriented information processing (cyber) and technical (physical) structures. Requirements modeling formalizes fundamental concepts and relations of a system architecture at a high-level design stage and can be used to identify potential design...... at later design stages. However, languages employed for requirements modeling today do not offer the expressiveness necessary to represent control purposes in relation to domain level interactions and therefore miss several types of interdependencies. This paper introduces the idea of control structure...

  4. Fog2 is required for normal diaphragm and lung development in mice and humans.

    Directory of Open Access Journals (Sweden)

    2005-07-01

    Full Text Available Congenital diaphragmatic hernia and other congenital diaphragmatic defects are associated with significant mortality and morbidity in neonates; however, the molecular basis of these developmental anomalies is unknown. In an analysis of E18.5 embryos derived from mice treated with N-ethyl-N-nitrosourea, we identified a mutation that causes pulmonary hypoplasia and abnormal diaphragmatic development. Fog2 (Zfpm2 maps within the recombinant interval carrying the N-ethyl-N-nitrosourea-induced mutation, and DNA sequencing of Fog2 identified a mutation in a splice donor site that generates an abnormal transcript encoding a truncated protein. Human autopsy cases with diaphragmatic defect and pulmonary hypoplasia were evaluated for mutations in FOG2. Sequence analysis revealed a de novo mutation resulting in a premature stop codon in a child who died on the first day of life secondary to severe bilateral pulmonary hypoplasia and an abnormally muscularized diaphragm. Using a phenotype-driven approach, we have established that Fog2 is required for normal diaphragm and lung development, a role that has not been previously appreciated. FOG2 is the first gene implicated in the pathogenesis of nonsyndromic human congenital diaphragmatic defects, and its necessity for pulmonary development validates the hypothesis that neonates with congenital diaphragmatic hernia may also have primary pulmonary developmental abnormalities.

  5. Requirement for estrogen receptor alpha in a mouse model for human papillomavirus-associated cervical cancer.

    Science.gov (United States)

    Chung, Sang-Hyuk; Wiedmeyer, Kerri; Shai, Anny; Korach, Kenneth S; Lambert, Paul F

    2008-12-01

    The majority of human cervical cancers are associated with the high-risk human papillomaviruses (HPV), which encode the potent E6 and E7 oncogenes. On prolonged treatment with physiologic levels of exogenous estrogen, K14E7 transgenic mice expressing HPV-16 E7 oncoprotein in their squamous epithelia succumb to uterine cervical cancer. Furthermore, prolonged withdrawal of exogenous estrogen results in complete or partial regression of tumors in this mouse model. In the current study, we investigated whether estrogen receptor alpha (ERalpha) is required for the development of cervical cancer in K14E7 transgenic mice. We show that exogenous estrogen fails to promote either dysplasia or cervical cancer in K14E7/ERalpha-/- mice despite the continued presence of the presumed cervical cancer precursor cell type, reserve cells, and evidence for E7 expression therein. We also observed that cervical cancers in our mouse models are strictly associated with atypical squamous metaplasia (ASM), which is believed to be the precursor for cervical cancer in women. Consistently, E7 and exogenous estrogen failed to promote ASM in the absence of ERalpha. We conclude that ERalpha plays a crucial role at an early stage of cervical carcinogenesis in this mouse model.

  6. 21 CFR 201.26 - Exceptions or alternatives to labeling requirements for human drug products held by the Strategic...

    Science.gov (United States)

    2010-04-01

    ... requirements for human drug products held by the Strategic National Stockpile. 201.26 Section 201.26 Food and... drug products held by the Strategic National Stockpile. (a) The appropriate FDA Center Director may... lots, batches, or other units of a human drug product that are or will be held in the...

  7. The human iliotibial band is specialized for elastic energy storage compared with the chimp fascia lata.

    Science.gov (United States)

    Eng, Carolyn M; Arnold, Allison S; Biewener, Andrew A; Lieberman, Daniel E

    2015-08-01

    This study examines whether the human iliotibial band (ITB) is specialized for elastic energy storage relative to the chimpanzee fascia lata (FL). To quantify the energy storage potential of these structures, we created computer models of human and chimpanzee lower limbs based on detailed anatomical dissections. We characterized the geometry and force-length properties of the FL, tensor fascia lata (TFL) and gluteus maximus (GMax) in four chimpanzee cadavers based on measurements of muscle architecture and moment arms about the hip and knee. We used the chimp model to estimate the forces and corresponding strains in the chimp FL during bipedal walking, and compared these data with analogous estimates from a model of the human ITB, accounting for differences in body mass and lower extremity posture. We estimate that the human ITB stores 15- to 20-times more elastic energy per unit body mass and stride than the chimp FL during bipedal walking. Because chimps walk with persistent hip flexion, the TFL and portions of GMax that insert on the FL undergo smaller excursions (origin to insertion) than muscles that insert on the human ITB. Also, because a smaller fraction of GMax inserts on the chimp FL than on the human ITB, and thus its mass-normalized physiological cross-sectional area is about three times less in chimps, the chimp FL probably transmits smaller muscle forces. These data provide new evidence that the human ITB is anatomically derived compared with the chimp FL and potentially contributes to locomotor economy during bipedal locomotion.

  8. Model to Evaluate the Aerodynamic Energy Requirements of Active Materials in Morphing Wings

    OpenAIRE

    Pettit, Gregory William

    2001-01-01

    A computational model is presented which predicts the force, stroke, and energy needed to overcome aerodynamic loads encountered by morphing wings during aircraft maneuvers. This low-cost model generates wing section shapes needed to follow a desired flight path, computes the resulting aerodynamic forces using a unique combination of conformal mapping and the vortex panel method, computes the longitudinal motion of the simulated aircraft, and closes the loop with a zero-error control law. T...

  9. Leveraging Human-environment Systems in Residential Buildings for Aggregate Energy Efficiency and Sustainability

    Science.gov (United States)

    Xu, Xiaoqi

    Reducing the energy consumed in the built environment is a key objective in many sustainability initiatives. Existing energy saving methods have consisted of physical interventions to buildings and/or behavioral modifications of occupants. However, such methods may not only suffer from their own disadvantages, e.g. high cost and transient effect, but also lose aggregate energy saving potential due to the oftentimes-associated single-building-focused view and an isolated examination of occupant behaviors. This dissertation attempts to overcome the limitations of traditional energy saving research and practical approaches, and enhance residential building energy efficiency and sustainability by proposing innovative energy strategies from a holistic perspective of the aggregate human-environment systems. This holistic perspective features: (1) viewing buildings as mutual influences in the built environment, (2) leveraging both the individual and contextualized social aspects of occupant behaviors, and (3) incorporating interactions between the built environment and human behaviors. First, I integrate three interlinked components: buildings, residents, and the surrounding neighborhood, and quantify the potential energy savings to be gained from renovating buildings at the inter-building level and leveraging neighborhood-contextualized occupant social networks. Following the confirmation of both the inter-building effect among buildings and occupants' interpersonal influence on energy conservation, I extend the research further by examining the synergy that may exist at the intersection between these "engineered" building networks and "social" peer networks, focusing specifically on the additional energy saving potential that could result from interactions between the two components. Finally, I seek to reach an alignment of the human and building environment subsystems by matching the thermostat preferences of each household with the thermal conditions within their

  10. Human requirements to the indoor air quality and the thermal environment

    Science.gov (United States)

    Fanger, P. Ole

    Perceived air quality, general thermal sensation of the occupants and risk of draft, aspects which human comfort in a space depends upon, are reviewed separately based on European Guidelines for Ventilation Requirements in Buildings and on a modified ISO (International Standards Organization) standard 7730 on thermal comfort. The perceived air quality is expressed in decipol or percentage of dissatisfied occupants. The general thermal sensation is expressed by the PMV/PPD indices. The perception of draft is expressed by the model of draft risk. Indoor air quality is mediocre and causes complaints in many buildings. The reason for this is often hidden pollution sources in the building, hitherto ignored in previous ventilation standards. To determine the required ventilation, a method is used in the European Guidelines. The new Guidelines acknowledge all pollution sources in the building, expressed in olfs. The method is based on the desired air quality in the space, the available quality of the outdoor air, the ventilation effectiveness and on the total pollution load in the space. The model of draft risk predicts the percentage of occupants feeling draft as a function of the mean air velocity, the turbulence intensity and the air temperature.

  11. The α isoform of topoisomerase II is required for hypercompaction of mitotic chromosomes in human cells.

    Science.gov (United States)

    Farr, Christine J; Antoniou-Kourounioti, Melissa; Mimmack, Michael L; Volkov, Arsen; Porter, Andrew C G

    2014-04-01

    As proliferating cells transit from interphase into M-phase, chromatin undergoes extensive reorganization, and topoisomerase (topo) IIα, the major isoform of this enzyme present in cycling vertebrate cells, plays a key role in this process. In this study, a human cell line conditional null mutant for topo IIα and a derivative expressing an auxin-inducible degron (AID)-tagged version of the protein have been used to distinguish real mitotic chromosome functions of topo IIα from its more general role in DNA metabolism and to investigate whether topo IIβ makes any contribution to mitotic chromosome formation. We show that topo IIβ does contribute, with endogenous levels being sufficient for the initial stages of axial shortening. However, a significant effect of topo IIα depletion, seen with or without the co-depletion of topo IIβ, is the failure of chromosomes to hypercompact when delayed in M-phase. This requires much higher levels of topo II protein and is impaired by drugs or mutations that affect enzyme activity. A prolonged delay at the G2/M border results in hyperefficient axial shortening, a process that is topo IIα-dependent. Rapid depletion of topo IIα has allowed us to show that its function during late G2 and M-phase is truly required for shaping mitotic chromosomes.

  12. Human breast cancer cell-mediated bone collagen degradation requires plasminogen activation and matrix metalloproteinase activity

    Directory of Open Access Journals (Sweden)

    Hill Peter A

    2005-02-01

    Full Text Available Abstract Background Breast cancer cells frequently metastasize to the skeleton and induce extensive bone destruction. Cancer cells produce proteinases, including matrix metalloproteinases (MMPs and the plasminogen activator system (PAS which promote invasion of extracellular matrices, but whether these proteinases degrade bone matrix is unclear. To characterize the role that breast cancer cell proteinases play in bone degradation we compared the effects of three human breast cancer cell lines, MDA-MB-231, ZR-75-1 and MCF-7 with those of a normal breast epithelial cell line, HME. The cell lines were cultured atop radiolabelled matrices of either mineralized or non-mineralized bone or type I collagen, the principal organic constituent of bone. Results The 3 breast cancer cell lines all produced significant degradation of the 3 collagenous extracellular matrices (ECMs whilst the normal breast cell line was without effect. Breast cancer cells displayed an absolute requirement for serum to dissolve collagen. Degradation of collagen was abolished in plasminogen-depleted serum and could be restored by the addition of exogenous plasminogen. Localization of plasmin activity to the cell surface was critical for the degradation process as aprotinin, but not α2 antiplasmin, prevented collagen dissolution. During ECM degradation breast cancer cell lines expressed urokinase-type plasminogen activator (u-PA and uPA receptor, and MMPs-1, -3, -9,-13, and -14. The normal breast epithelial cell line expressed low levels of MMPs-1, and -3, uPA and uPA receptor. Inhibitors of both the PAS (aprotinin and PA inhibitor-1 and MMPs (CT1166 and tisue inhibitor of metalloproteinase blocked collagen degradation, demonstrating the requirement of both plasminogen activation and MMP activity for degradation. The activation of MMP-13 in human breast cancer cells was prevented by plasminogen activator inhibitor-1 but not by tissue inhibitor of metalloproteinase-1, suggesting

  13. Plasma bile acids are not associated with energy metabolism in humans

    Directory of Open Access Journals (Sweden)

    Brufau Gemma

    2010-09-01

    Full Text Available Abstract Bile acids (BA have recently been shown to increase energy expenditure in mice, but this concept has not been tested in humans. Therefore, we investigated the relationship between plasma BA levels and energy expenditure in humans. Type 2 diabetic (T2DM patients (n = 12 and gender, age and BMI-matched healthy controls (n = 12 were studied before and after 8 weeks of treatment with a BA sequestrant. In addition, patients with liver cirrhosis (n = 46 were investigated, since these display elevated plasma BA together with increased energy expenditure. This group was compared to gender-, age- and BMI-matched healthy controls (n = 20. Fasting plasma levels of total BA and individual BA species as well as resting energy expenditure were determined. In response to treatment with the BA sequestrant, plasma deoxycholic acid (DCA levels decreased in controls (-60%, p

  14. Preparation of human resources for future nuclear energy using FBNR as the instrument of learning

    Energy Technology Data Exchange (ETDEWEB)

    Sefidvash, Farhang; Espinoza, Patricio; Guerrero, Victor Hugo [Escuela Politecnica Nacional (EPN), Quito (Ecuador); and others

    2015-11-15

    An increasing number of developing countries are showing interest to become the emerging countries to nuclear energy. Most of these countries lack human resources and adequate infrastructures to enter such a venture. The principle objective of activities of FBNR Group is to train human resources for the countries that at the present lack the necessary conditions, but aim at the future clean and safe nuclear energy through the fourth generation and INPRO compatible nuclear reactors. The preparation for the future nuclear energy is done through development of innovative nuclear reactor that meets the INPRO philosophies and criteria. These countries may or may not have decided as yet to utilize nuclear energy, but are interested to gain a strong educational foundation for their future. The research and development of a small innovative nuclear reactor FBNR is used as the instrument for learning. The young scientists will learn how to be innovative with the vision of INPRO philosophy and criteria.

  15. Body Composition and Energy Expenditure Predict Ad-Libitum Food and Macronutrient Intake in Humans

    OpenAIRE

    Weise, Christopher M.; Hohenadel, Maximilian G.; Krakoff, Jonathan; Votruba, Susanne B.

    2013-01-01

    Background Obesity is the result of chronic positive energy balance. The mechanisms underlying the regulation of energy homeostasis and food intake are not understood. Despite large increases in fat mass (FM), recent evidence indicates that fat-free mass (FFM) rather than FM is positively associated with intake in humans. Methods In 184 humans (73F/111M; age 34.5±8.8y; % body fat [PFAT] 31.6±8.1%) we investigated the relationship of FFM index (FFMI kg*m2), FM index (FMI kg*m2;), and 24-hour e...

  16. Space Station Control Requirements and Flywheel System Weights for Combined Momentum and Energy Storage

    Science.gov (United States)

    Elam, F. M.

    1983-01-01

    The specifications of the flywheel system for momentum storage and vehicle torquing are somewhat dependent upon the attitude control requirements of the space station in orbit. As a ground rule, the flywheel system will be sized large enough to provide all attitude maneuvers, if practical, to avoid or minimize turning on the reaction control system (RCS). The RCS, whenever used, expels expensive mass and tends to contaminate optical surfaces of the vehicle. The vehicle rate and acceleration specifications of 0.10 deg/sec and 0.01 deg/square sec are tentative, and may be reduced if lesser values are more practical for flywheel design. For local vertical attitude hold, the average attitude error should be zero, and not the classical 1 degree, since control moment gyro (CMG) gimbal angles provide an exact reference feedback for gravity gradient momentum. Docking presents a problem for docking transients and attitude alignment which will require use of the RCS.

  17. Computing requirements for high energy physics experiments at the LHC collider

    CERN Document Server

    Witek, Mariusz

    2002-01-01

    In this article the requirements for the future experiments of elementary particle physics are discussed. The nature of physics phenomena expected at the LHC collider at CERN leads to an unprecedented scale of the computing infrastructure for the data storage and analysis. The possible solution is based on the distributed computing model, and is presented within the context of the global unification of the computer resources as proposed by the GRID projects. (7 refs).

  18. What is required to make hydrogen a real energy carrier option?

    Energy Technology Data Exchange (ETDEWEB)

    Braeuninger, S.; Schindler, G.; Schwab, E.; Weck, A. [BASF SE, Ludwigshafen (Germany)

    2010-12-30

    The driver for the introduction of hydrogen as mobile energy-carrier is regulatory measures to avoid the CO{sub 2} emissions which are related to the current fossil carbon based situation. H{sub 2} is a large volume chemical product with an annual production of about 45 million tons, most of which currently is also derived from fossil sources. The German transport sector consumes 2,6.10{sup 12} MJ/a which in terms of energy is equivalent to nearly 50% of the current world hydrogen production. There is the proposal to start the ''hydrogen economy'' with ''excess H{sub 2}'' which is believed to be available as inadvertently occurring byproduct of chemical processes. A potential {proportional_to}2 million tons is estimated for this ''excess H{sub 2}'' in Europe; the proposal however does not take into account, that current uses of this H{sub 2} would have to be substituted. Therefore, an overall gain for the environment cannot be expected. Therefore, a sustainable hydrogen based energy scenario has to rely on new sources. Besides Biomass gasification which in terms of technology would resemble the conventional fossil based hydrogen production, the only other viable carbon-free hydrogen source is water, which has to be split into its constituting elements. The current paper is restricted to the latter path, the feasibility of the biomass approach needs to be discussed elsewhere. If hypothetically the above mentioned energy for the German transport sector would be provided by H{sub 2} from water electrolysis an electricity input of 4.10{sup 12} MJ would be needed. This number exceeds the currently installed German wind turbine capacity by a factor of 6 and even by a factor of 36, if the weather-based {proportional_to}16% year-round on-stream factor for onshore plants is taken into account. (orig.)

  19. Research and development of energy harvesting from vibrations and human motions (Conference Presentation)

    Science.gov (United States)

    Liao, Wei-Hsin

    2017-04-01

    Most of the ambient energy, which was regarded useless in the past, now is under the spotlight. With the rapid developments on low power electronics, future personal mobile devices and remote sensing systems might become self-powered by scavenging energy in different forms from their surroundings. Kinetic energy is one of the promising energy forms in our living environment, e.g., human motions and vibrations. We have proposed an energy flow to clarify the functions of piezoelectric energy harvesting, dissipation, and their effects on the structural damping of vibrating structures. Impedance modeling and analysis were performed. We have designed an improved self-powered switching interface for piezoelectric energy harvesting circuits. With electromagnetic transduction, we also proposed a knee-mounted energy harvester that could convert the mechanical power from knee joints into electricity during walking. On the other hand, we have developed magnetorheological (MR) fluid devices with multiple functions, including rotary actuators and linear dampers. Multifunctional rotary actuator was designed to integrate motor/generator part and MR fluids into a single device. The actuator could function as motor, generator, clutch and brake, with compact size and good energy efficiency. In addition, novel self-sensing MR dampers with power generation, so as to integrate the dynamic sensing, controllable damping and power generation functions, were developed and investigated. Prototypes were fabricated and tested. The developed actuators were promising for various applications. In this paper, related research in energy harvesting done at The Chinese University of Hong Kong and key results will be presented.

  20. Energy requirements of Dorper×thin-tailed Han crossbred ewes during non-pregnancy and lactation

    Institute of Scientific and Technical Information of China (English)

    LOU Can; DIAO Qi-yu; SI Bing-wen; DENG Kai-dong; MA Tao; JIANG Cheng-gang; TU Yan; ZHANG Nai-feng; JI Shou-kun; CHEN Dan-dan

    2015-01-01

    This experiment was conducted to investigate the energy requirement of Dorper×thin-tailed Han crossbred ewes during non-pregnancy and lactation. Fifteen ewes after parturition were randomly assigned to three treatments:ad libitum(100%) feed intake and 80 or 60%ad libitum intake, and another nine non-pregnant ewes were assigned to a blank control group. Digestibility trials were performed in the non-pregnant ewes and in the lactating ewes on the 20th, 50th, and 80th d of lactation. In paralel with the digestibility trial, a respirometry experiment was conducted to determine the methane and carbon dioxide production with an open-circuit respirometry system that was equipped with respiratory chambers. The net energy (NE) and metabolizable energy (ME) requirements for maintenance and growth were calculated using the carbon and nitrogen balance method. The results revealed that the carbon (C) and nitrogen (N) excretions and energy losses at faeces and urine, as wel as the output of methane and CO2, increased signiifcantly with decreasing feed intake (P<0.01). The apparent digestibilities of C in the stages of non-pregnancy and early, middle and late lactation were 55.8–58.3%, 62.5–73.8%, 64.8–71.3%, and 61.7–65.0%, respectively, and the apparent digestibilities of N were 45.2–51.3%, 73.7–82.7%, 72.8–80.5%, and 73.6–76.5%, respectively. The corresponding energy apparent digestibilities were 52.0–56.3%, 60.7–76.6%, 61.0–68.8%, and 61.4–67.7%, respectively. The ME/DE (digestible energy) values were 79.5–85.9%, 79.4–83.5%, 81.0%–85.3% and 78.6–82.9%, respectively. The maintenance requirements of NE, ME, and the efifciencies of ME utilisation for maintenance during the stages of non-pregnancy and early, middle and late lactation were 215.5, 253.1, 247.7, and 244.7 kJ kg–1 BW0.75 d, and 372.4, 327.1, 320.9, and 362.0 kJ kg–1 BW0.75 d, and 0.58, 0.77, 0.77, and 0.68, respectively. The ME requirement for the growth of non-pregnant ewes was

  1. Energy shortage, a driving force of human history. An energy-related social and history theory; Energiemangel als Antrieb der Menschheitsgeschichte. Eine energetische Gesellschafts- und Geschichtstheorie

    Energy Technology Data Exchange (ETDEWEB)

    Droste, Dietrich

    2010-07-01

    The book explains progress as an attempt to cope with energy shortages of societies by means of energetic innovations. This is a new methodological approach which enables a stringent causal explanation of historical processes and events. According to the author, the current energy transition is the ''eigth energy revolution'' in human history. (orig.)

  2. The First Development of Human Factors Engineering Requirements for Application to Ground Task Design for a NASA Flight Program

    Science.gov (United States)

    Dischinger, H. Charles, Jr.; Stambolian, Damon B.; Miller, Darcy H.

    2008-01-01

    The National Aeronautics and Space Administration has long applied standards-derived human engineering requirements to the development of hardware and software for use by astronauts while in flight. The most important source of these requirements has been NASA-STD-3000. While there have been several ground systems human engineering requirements documents, none has been applicable to the flight system as handled at NASA's launch facility at Kennedy Space Center. At the time of the development of previous human launch systems, there were other considerations that were deemed more important than developing worksites for ground crews; e.g., hardware development schedule and vehicle performance. However, experience with these systems has shown that failure to design for ground tasks has resulted in launch schedule delays, ground operations that are more costly than they might be, and threats to flight safety. As the Agency begins the development of new systems to return humans to the moon, the new Constellation Program is addressing this issue with a new set of human engineering requirements. Among these requirements is a subset that will apply to the design of the flight components and that is intended to assure ground crew success in vehicle assembly and maintenance tasks. These requirements address worksite design for usability and for ground crew safety.

  3. NREL/Habitat for Humanity Zero Energy Home: A Cold-Climate Case Study for Affordable Zero Energy Homes

    Energy Technology Data Exchange (ETDEWEB)

    Norton, P.; Christensen, C.; Hancock, E.; Barker, G.; Reeves, P.

    2008-06-01

    The design of this 1,280-square-foot, three-bedroom Habitat for Humanity of Metro Denver zero energy home carefully combines envelope efficiency, efficient equipment, appliances and lighting, and passive and active solar features to reach the zero energy goal. The home was designed with an early version (July 22, 2004) of the BEOpt building optimization software; DOE2 and TRNSYS were used to perform additional analysis. This engineering approach was tempered by regular discussions with Habitat construction staff and volunteers. These discussions weighed the applicability of the optimized solutions to the special needs and economics of a Habitat house--moving the design toward simple, easily maintained mechanical systems and volunteer-friendly construction techniques. A data acquisition system was installed in the completed home to monitor its performance.

  4. NREL/Habitat for Humanity Zero Energy Home: A Cold-Climate Case Study for Affordable Zero Energy Homes

    Energy Technology Data Exchange (ETDEWEB)

    Norton, P.; Christensen, C.; Hancock, E.; Barker, G.; Reeves, P.

    2008-06-01

    The design of this 1,280-square-foot, three-bedroom Habitat for Humanity of Metro Denver zero energy home carefully combines envelope efficiency, efficient equipment, appliances and lighting, and passive and active solar features to reach the zero energy goal. The home was designed with an early version (July 22, 2004) of the BEOpt building optimization software; DOE2 and TRNSYS were used to perform additional analysis. This engineering approach was tempered by regular discussions with Habitat construction staff and volunteers. These discussions weighed the applicability of the optimized solutions to the special needs and economics of a Habitat house--moving the design toward simple, easily maintained mechanical systems and volunteer-friendly construction techniques. A data acquisition system was installed in the completed home to monitor its performance.

  5. The AMPK β2 Subunit Is Required for Energy Homeostasis during Metabolic Stress

    Science.gov (United States)

    Ju, Jeong Sun; Sasaki, Yo; Liu, Xiaona; Jung, Su-Ryun; Higashida, Kazuhiko; Lindquist, Diana

    2012-01-01

    AMP activated protein kinase (AMPK) plays a key role in the regulatory network responsible for maintaining systemic energy homeostasis during exercise or nutrient deprivation. To understand the function of the regulatory β2 subunit of AMPK in systemic energy metabolism, we characterized β2 subunit-deficient mice. Using these mutant mice, we demonstrated that the β2 subunit plays an important role in regulating glucose, glycogen, and lipid metabolism during metabolic stress. The β2 mutant animals failed to maintain euglycemia and muscle ATP levels during fasting. In addition, β2-deficient animals showed classic symptoms of metabolic syndrome, including hyperglycemia, glucose intolerance, and insulin resistance when maintained on a high-fat diet (HFD), and were unable to maintain muscle ATP levels during exercise. Cell surface-associated glucose transporter levels were reduced in skeletal muscle from β2 mutant animals on an HFD. In addition, they displayed poor exercise performance and impaired muscle glycogen metabolism. These mutant mice had decreased activation of AMPK and deficits in PGC1α-mediated transcription in skeletal muscle. Our results highlight specific roles of AMPK complexes containing the β2 subunit and suggest the potential utility of AMPK isoform-specific pharmacological modulators for treatment of metabolic, cardiac, and neurological disorders. PMID:22586267

  6. Brown adipose tissue in humans: detection and functional analysis using PET (positron emission tomography), MRI (magnetic resonance imaging), and DECT (dual energy computed tomography).

    Science.gov (United States)

    Borga, Magnus; Virtanen, Kirsi A; Romu, Thobias; Leinhard, Olof Dahlqvist; Persson, Anders; Nuutila, Pirjo; Enerbäck, Sven

    2014-01-01

    If the beneficial effects of brown adipose tissue (BAT) on whole body metabolism, as observed in nonhuman experimental models, are to be translated to humans, tools that accurately measure how BAT influences human metabolism will be required. This chapter discusses such techniques, how they can be used, what they can measure and also some of their limitations. The focus is on detection and functional analysis of human BAT and how this can be facilitated by applying advanced imaging technology such as positron emission tomography, magnetic resonance imaging, and dual energy computed tomography. © 2014 Elsevier Inc. All rights reserved.

  7. Renewable energy sources: Jobs created, skills required (and identified gaps, education and training

    Directory of Open Access Journals (Sweden)

    Malamatenios Charalampos

    2016-01-01

    Full Text Available As has been documented, renewables contribute significantly to employment growth, creating relatively more jobs than the fossil fuels they displace, an important fact due to the dramatic rise in unemployment experienced nowadays. The results of various studies made are presented, along with projections for the future. The jobs per installed megawatt of various renewable energy (RE technologies are estimated for Greece and compared to conventional power production methods. Then, the variety of professions involved in each sub-sector of the RE industry (equipment manufacture and distribution, project development, construction and installation, operation and maintenance of plants are presented, along with the recognized skills they should have to properly fulfil their tasks. Finally, selected initiatives undertaken by universities and vocational training providers aiming to address the identified skill shortages in all RE industry's parts are listed.

  8. Analysis of dose-LET distribution in the human body irradiated by high energy hadrons.

    Science.gov (United States)

    Sato, T; Tsuda, S; Sakamoto, Y; Yamaguchi, Y; Niita, K

    2003-01-01

    For the purposes of radiological protection, it is important to analyse profiles of the particle field inside a human body irradiated by high energy hadrons, since they can produce a variety of secondary particles which play an important role in the energy deposition process, and characterise their radiation qualities. Therefore Monte Carlo calculations were performed to evaluate dose distributions in terms of the linear energy transfer of ionising particles (dose-LET distribution) using a newly developed particle transport code (Particle and Heavy Ion Transport code System, PHITS) for incidences of neutrons, protons and pions with energies from 100 MeV to 200 GeV. Based on these calculations, it was found that more than 80% and 90% of the total deposition energies are attributed to ionisation by particles with LET below 10 keV microm(-1) for the irradiations of neutrons and the charged particles, respectively.

  9. Requirements and impacts of the Federal Facility Compliance Act on the Department of Energy

    Energy Technology Data Exchange (ETDEWEB)

    Chang, L.; Tripp, S.C. [Dept. of Energy, Washington, DC (United States). Office of Environmental Restoration and Waste Management

    1993-03-01

    The Federal Facilities Compliance Act (FFCA, the Act) was signed into law on October 6, 1992, primarily as a means of waiving sovereign immunity for federal facilities with respect to requirements under the Resource Conservation and Recovery Act. DOE`s implementation of the FFCA will have significant effects on current and future DOE waste management operations. DOE will need to rethink its strategy in the area of future compliance agreements to ensure commitments and deliverables are made consistent throughout the different DOE facilities. Several types of agreements that address mixed waste land disposal restriction (LDR) compliance have already been signed by both DOE and the regulators. These agreements are in place at the Hanford Reservation, the Savannah River Site, the Oak Ridge Reservation (Oak Ridge National Laboratory, K-25, Y-12), and the Paducah Gaseous Diffusion Plant. The Rocky Flats Agreement is now being renegotiated. Los Alamos National Laboratory, Sandia/Albuquerque National Laboratory, Lawrence Livermore National Laboratory, and Idaho National Engineering Laboratory agreements are in progress. Major components of the FFCA include provisions on: sovereign immunity waiver; cost reimbursements; mixed waste requirements, including inventory reports on mixed waste and treatment capacity and technologies; and plans for the development of treatment capacities and technologies. Each of these components is discussed within this paper.

  10. Future mission opportunities and requirements for advanced space photovoltaic energy conversion technology

    Science.gov (United States)

    Flood, Dennis J.

    1990-01-01

    The variety of potential future missions under consideration by NASA will impose a broad range of requirements on space solar arrays, and mandates the development of new solar cells which can offer a wide range of capabilities to mission planners. Major advances in performance have recently been achieved at several laboratories in a variety of solar cell types. Many of those recent advances are reviewed, the areas are examined where possible improvements are yet to be made, and the requirements are discussed that must be met by advanced solar cell if they are to be used in space. The solar cells of interest include single and multiple junction cells which are fabricated from single crystal, polycrystalline and amorphous materials. Single crystal cells on foreign substrates, thin film single crystal cells on superstrates, and multiple junction cells which are either mechanically stacked, monolithically grown, or hybrid structures incorporating both techniques are discussed. Advanced concentrator array technology for space applications is described, and the status of thin film, flexible solar array blanket technology is reported.

  11. Energy distributions exhibited during thermal runaway of commercial lithium ion batteries used for human spaceflight applications

    Science.gov (United States)

    Yayathi, Sandeep; Walker, William; Doughty, Daniel; Ardebili, Haleh

    2016-10-01

    Lithium ion (Li-ion) batteries provide low mass and energy dense solutions necessary for space exploration, but thermal related safety concerns impede the utilization of Li-ion technology for human applications. Experimental characterization of thermal runaway energy release with accelerated rate calorimetry supports safer thermal management systems. 'Standard' accelerated rate calorimetry setup provides means to measure the addition of energy exhibited through the body of a Li-ion cell. This study considers the total energy generated during thermal runaway as distributions between cell body and hot gases via inclusion of a unique secondary enclosure inside the calorimeter; this closed system not only contains the cell body and gaseous species, but also captures energy release associated with rapid heat transfer to the system unobserved by measurements taken on the cell body. Experiments include Boston Power Swing 5300, Samsung 18650-26F and MoliCel 18650-J Li-ion cells at varied states-of-charge. An inverse relationship between state-of-charge and onset temperature is observed. Energy contained in the cell body and gaseous species are successfully characterized; gaseous energy is minimal. Significant additional energy is measured with the heating of the secondary enclosure. Improved calorimeter apparatus including a secondary enclosure provides essential capability to measuring total energy release distributions during thermal runaway.

  12. Characterization of human manure-derived biochar and energy-balance analysis of slow pyrolysis process.

    Science.gov (United States)

    Liu, Xuan; Li, Zifu; Zhang, Yaozhong; Feng, Rui; Mahmood, Ibrahim Babatunde

    2014-09-01

    Biochars have received increasing attention in recent years because of their soil improvement potential, contaminant immobilization properties, and ability to function as carbon sinks. This study adopted a pyrolytic process to prepare a series of biochars from dried human manure at varying temperatures. The thermal analysis of human manure and physicochemical properties of the resulting biochars illustrated that human manure can be a favorable feedstock for biochar production. In particular, the porous texture and nutrient-rich properties of biochars produced from human manure and may significantly enhance soil fertility when used as used soil additives. A temperature range of 500-600°C was optimal for human manure biochar production. Significantly, when the moisture content of the feedstock is lower than 57%, the system could not only harvest manure-derived biochar but also have a net energy output, which can be provide heat source for nearby users.

  13. Human power-based energy harvesting strategies for mobile electronic devices

    Institute of Scientific and Technical Information of China (English)

    Dewei JIA; Jing LIU

    2009-01-01

    Energy problems arise with the proliferation of mobile electronic devices, which range from entertainment tools to life saving medical instruments. The large amount of energy consumption and increasing mobility of electronic devices make it urgent that new power sources should be developed. It has been gradually recognized that the human body is highly flexible in generating applicable power from sources of heat dissipation, joint rotation, enforcement of body weight, vertical displacement of mass centers, and even elastic deformation of tissues and other attachments. These basic combinations of daily activities or metabolic phenomena open up possibilities for harvest-ing energy which is strong enough to power mobile or even implantable medical devices which could be used for a long time or be recharged permanently. A comprehensive review is presented in this paper on the latest developed or incubating electricity generation methods based on human power which would serve as promising candidates for future mobile power. Thermal and mechanical energy, investigated more thoroughly so far, will particularly be emphasized. Thermal energy relies on body heat and employs the property of thermoelectric materials, while mechanical energy is generally extracted in the form of enforcement or displacement excitation. For illustration purposes, the piezoelectric effect, dielectric elastomer and the electromagnetic induction couple, which can convert force directly into electricity, were also evaluated. Mean-while, examples are given to explain how to adopt inertia generators for converting displacement energy via piezo-electric, electrostatic, electromagnetic or magnetostrictive vibrators. Finally, future prospects in harvesting energy from human power are made in conclusion.

  14. Fault Detection in WSNs - An Energy Efficiency Perspective Towards Human-Centric WSNs

    DEFF Research Database (Denmark)

    Orfanidis, Charalampos; Zhang, Yue; Dragoni, Nicola

    2015-01-01

    Energy efficiency is a key factor to prolong the lifetime of wireless sensor networks (WSNs). This is particularly true in the design of human-centric wireless sensor networks (HCWSN) where sensors are more and more embedded and they have to work in resource-constraint settings. Resource limitati...

  15. Microencapsulated bitter compounds (from Gentiana lutea) reduce daily energy intakes in humans

    NARCIS (Netherlands)

    Mennella, Ilario; Fogliano, Vincenzo; Ferracane, Rosalia; Arlorio, Marco; Pattarino, Franco; Vitaglione, Paola

    2016-01-01

    Mounting evidence showed that bitter-tasting compounds modulate eating behaviour through bitter taste receptors in the gastrointestinal tract. This study aimed at evaluating the influence of microencapsulated bitter compounds on human appetite and energy intakes. A microencapsulated bitter

  16. Design of wearable hybrid generator for harvesting heat energy from human body depending on physiological activity

    Science.gov (United States)

    Kim, Myoung-Soo; Kim, Min-Ki; Kim, Kyongtae; Kim, Yong-Jun

    2017-09-01

    We developed a prototype of a wearable hybrid generator (WHG) that is used for harvesting the heat energy of the human body. This WHG is constructed by integrating a thermoelectric generator (TEG) in a circular mesh polyester knit fabric, circular-shaped pyroelectric generator (PEG), and quick sweat-pickup/dry-fabric. The fabric packaging enables the TEG part of the WHG to generate energy steadily while maintaining a temperature difference in extreme temperature environments. Moreover, when the body sweats, the evaporation heat of the sweat leads to thermal fluctuations in the WHG. This phenomenon further leads to an increase in the output power of the WHG. These characteristics of the WHG make it possible to produce electrical energy steadily without reduction in the conversion efficiency, as both TEG and PEG use the same energy source of the human skin and the ambient temperature. Under a temperature difference of ˜6.5 °C and temperature change rate of ˜0.62 °C s-1, the output power and output power density of the WHG, respectively, are ˜4.5 nW and ˜1.5 μW m-2. Our hybrid approach will provide a framework to enhance the output power of the wearable generators that harvest heat energy from human body in various environments.

  17. A short investigation of the effect of an energy harvesting backpack on the human gait

    Science.gov (United States)

    Papatheou, Evangelos; Green, Peter; Racic, Vitomir; Brownjohn, James M. W.; Sims, Neil D.

    2012-04-01

    Exploiting human motion for the purpose of energy harvesting has been a popular idea for some time. Many of the approaches proposed can be uncomfortable or they impose a significant burden on the person's gait. In the current paper a hardware in-the-loop simulator of an energy harvesting backpack is employed in order to investigate the effect of a suspended-load backpack on the human gait. The idea is based on the energy produced by a suspended-load which moves vertically on a backpack while a person walks. The energy created from such a linear system can be maximised when it resonates with the walking frequency of the person. However, such a configuration can also cause great forces to be applied on the back of the user. The system which is presented here consists of a mass attached on a rucksack, which is controlled by a motor in order to simulate the suspended-load backpack. The advantage of this setup is the ability to test different settings, regarding the spring stiffness or the damping coefficient, of the backpack harvester, and study their effect on the energy harvesting potential, as well as on the human gait. The present contribution describes the preliminary results and analysis of the testing of the system with the help of nine male volunteers who carried it on a treadmill.

  18. Regulation of skeletal muscle energy/nutrient-sensing pathways during metabolic adaptation to fasting in healthy humans.

    Science.gov (United States)

    Wijngaarden, Marjolein A; Bakker, Leontine E H; van der Zon, Gerard C; 't Hoen, Peter A C; van Dijk, Ko Willems; Jazet, Ingrid M; Pijl, Hanno; Guigas, Bruno

    2014-11-15

    During fasting, rapid metabolic adaptations are required to maintain energy homeostasis. This occurs by a coordinated regulation of energy/nutrient-sensing pathways leading to transcriptional activation and repression of specific sets of genes. The aim of the study was to investigate how short-term fasting affects whole body energy homeostasis and skeletal muscle energy/nutrient-sensing pathways and transcriptome in humans. For this purpose, 12 young healthy men were studied during a 24-h fast. Whole body glucose/lipid oxidation rates were determined by indirect calorimetry, and blood and skeletal muscle biopsies were collected and analyzed at baseline and after 10 and 24 h of fasting. As expected, fasting induced a time-dependent decrease in plasma insulin and leptin levels, whereas levels of ketone bodies and free fatty acids increased. This was associated with a metabolic shift from glucose toward lipid oxidation. At the molecular level, activation of the protein kinase B (PKB/Akt) and mammalian target of rapamycin pathways was time-dependently reduced in skeletal muscle during fasting, whereas the AMP-activated protein kinase activity remained unaffected. Furthermore, we report some changes in the phosphorylation and/or content of forkhead protein 1, sirtuin 1, and class IIa histone deacetylase 4, suggesting that these pathways might be involved in the transcriptional adaptation to fasting. Finally, transcriptome profiling identified genes that were significantly regulated by fasting in skeletal muscle at both early and late time points. Collectively, our study provides a comprehensive map of the main energy/nutrient-sensing pathways and transcriptomic changes during short-term adaptation to fasting in human skeletal muscle.

  19. Whole genome functional analysis identifies novel components required for mitotic spindle integrity in human cells

    Science.gov (United States)

    Rines, Daniel R; Gomez-Ferreria, Maria Ana; Zhou, Yingyao; DeJesus, Paul; Grob, Seanna; Batalov, Serge; Labow, Marc; Huesken, Dieter; Mickanin, Craig; Hall, Jonathan; Reinhardt, Mischa; Natt, Francois; Lange, Joerg; Sharp, David J; Chanda, Sumit K; Caldwell, Jeremy S

    2008-01-01

    Background The mitotic spindle is a complex mechanical apparatus required for accurate segregation of sister chromosomes during mitosis. We designed a genetic screen using automated microscopy to discover factors essential for mitotic progression. Using a RNA interference library of 49,164 double-stranded RNAs targeting 23,835 human genes, we performed a loss of function screen to look for small interfering RNAs that arrest cells in metaphase. Results Here we report the identification of genes that, when suppressed, result in structural defects in the mitotic spindle leading to bent, twisted, monopolar, or multipolar spindles, and cause cell cycle arrest. We further describe a novel analysis methodology for large-scale RNA interference datasets that relies on supervised clustering of these genes based on Gene Ontology, protein families, tissue expression, and protein-protein interactions. Conclusion This approach was utilized to classify functionally the identified genes in discrete mitotic processes. We confirmed the identity for a subset of these genes and examined more closely their mechanical role in spindle architecture. PMID:18302737

  20. Caspase-1 activity is required for UVB-induced apoptosis of human keratinocytes.

    Science.gov (United States)

    Sollberger, Gabriel; Strittmatter, Gerhard E; Grossi, Serena; Garstkiewicz, Martha; Auf dem Keller, Ulrich; French, Lars E; Beer, Hans-Dietmar

    2015-05-01

    Caspase-1 has a crucial role in innate immunity as the protease activates the proinflammatory cytokine prointerleukin(IL)-1β. Furthermore, caspase-1 induces pyroptosis, a lytic form of cell death that supports inflammation. Activation of caspase-1 occurs in multi-protein complexes termed inflammasomes, which assemble upon sensing of stress signals. In the skin and in skin-derived keratinocytes, UVB irradiation induces inflammasome-dependent IL-1 secretion and sunburn. Here we present evidence that caspase-1 and caspase-4 are required for UVB-induced apoptosis. In UVB-irradiated human primary keratinocytes, apoptosis occurs significantly later than inflammasome activation but depends on caspase-1 activity. However, it proceeds independently of inflammasome activation. By a proteomics approach, we identified the antiapoptotic Bap31 as a putative caspase-1 substrate. Caspase-1-dependent apoptosis is possibly a recent process in evolution as it was not detected in mice. These results suggest a protective role of caspase-1 in keratinocytes during UVB-induced skin cancer development through the induction of apoptosis.