WorldWideScience

Sample records for hull strength theory

  1. Ultimate Longitudinal Strength of Composite Ship Hulls

    Science.gov (United States)

    Zhang, Xiangming; Huang, Lingkai; Zhu, Libao; Tang, Yuhang; Wang, Anwen

    2017-01-01

    A simple analytical model to estimate the longitudinal strength of ship hulls in composite materials under buckling, material failure and ultimate collapse is presented in this paper. Ship hulls are regarded as assemblies of stiffened panels which idealized as group of plate-stiffener combinations. Ultimate strain of the plate-stiffener combination is predicted under buckling or material failure with composite beam-column theory. The effects of initial imperfection of ship hull and eccentricity of load are included. Corresponding longitudinal strengths of ship hull are derived in a straightforward method. A longitudinally framed ship hull made of symmetrically stacked unidirectional plies under sagging is analyzed. The results indicate that present analytical results have a good agreement with FEM method. The initial deflection of ship hull and eccentricity of load can dramatically reduce the bending capacity of ship hull. The proposed formulations provide a simple but useful tool for the longitudinal strength estimation in practical design.

  2. Thin-Walled Beam Theories and Their Applications in the Torsional Strength Analysis of Ship Hulls.

    Science.gov (United States)

    1987-01-01

    numerous deep web frames and transverse bulkheads. The system has been utilized in a study of a frigate under an assumed torsional/flexural load, the...transverse bulkheads and r deep web frames. Figure 18 indicates that, despite the poor agreement in twist angle, the axial stress results compare quite...under torsional loads. This will be the case for a typical warship hull, because of the large number of deep web frames and transverse bulkheads. The

  3. FPSO global strength and hull optimization

    Science.gov (United States)

    Ma, Junyuan; Xiao, Jianhua; Ma, Rui; Cao, Kai

    2014-03-01

    Global strength is a significant item for floating production storage and offloading (FPSO) design, and steel weight plays an important role in the building costs of FPSO. It is the main task to consider and combine these two aspects by optimizing hull dimensions. There are many optional methods for the global strength analysis. A common method is to use the ABS FPSO Eagle software to analyze the global strength including the rule check and direct strength analysis. And the same method can be adopted for the FPSO hull optimization by changing the depth. After calculation and optimization, the results are compared and analyzed. The results can be used as a reference for the future design or quotation purpose.

  4. Ultimate Strength of Ship Hulls under Torsion

    DEFF Research Database (Denmark)

    Paik, Jeom Kee; Thayamballi, Anil K.; Pedersen, Preben Terndrup

    2001-01-01

    For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characte......For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength...... characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections...... subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical...

  5. Study on practical application of a longitudinal hull strength theory considering camber in cross section; Yokodanmen no sori wo koryoshita sentai tate kyodo riron no jitsuyoka ni kansuru kenkyu. 2

    Energy Technology Data Exchange (ETDEWEB)

    Nose, M.; Suzuki, K.; Furuno, H. [Nagasaki Institute of Applied Science, Nagasaki (Japan); Suzuki, K.

    1997-10-01

    Discussions were given on practical application of a stress analyzing method for thin-wall deformed cross-sectional beam considering cross section camber in longitudinal bending. The non-static calculation method described in the previous report can be applied to a box-type cross section having multi-connected cells, bulk cargo transport vessels and container ships with dual hull structure, and oil tankers with dual hull structure of medium size. The calculation method was capable of achieving remarkable enhancement in efficiency over that of conventional calculation methods. The present study is intended to make the method applicable also to multi-connected cross section shapes having more than one longitudinal partitions as used in dual hull VLCC and ULCC. As a result, an expanded non-static calculation system was developed, which has introduced into the conception described in the previous report a new conception of triple point and independent start point members. As a result of applying the method to dual hull bulk cargo transport vessels, container ships, dual hull oil tankers of medium size, VLCC and ULCC, it was verified that the system operated properly. Remarkable efficiency improvement has been made possible as compared with conventional analysis methods applied to individual ships. The system is capable of automatic calculation, and makes possible the practical application of the hull strength theory considering cross section camber. 3 refs., 10 figs., 1 tab.

  6. Calculation for Hull Strength Construction in Offshore Structures

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    2013-09-01

    Sep 1, 2013 ... Ship classification societies such as Det Norske Veritas, American Bureau of Shipping, and Lloyd's. Register have established standard calculation forms for hull loads, strength requirements, thickness of hull plating, reinforcing stiffeners, girders, and other structures. This paper therefore used the relevant ...

  7. Ship Hull Principal Dimensions Optimization Employing Fuzzy Decision-Making Theory

    Directory of Open Access Journals (Sweden)

    Chen Jianping

    2016-01-01

    Full Text Available The paper presents an optimization method for the ship hull principal dimensions scheme employing the fuzzy decision-making theory. First of all, the paper establishes the fuzzy decision-making model of the ship hull principal dimensions optimization, and then a series of ship hull principal dimensions schemes are accordingly constructed by employing the variable value method. On the basis of this, the fuzzy decision-making method is employed to evaluate the series ship hull principal dimensions schemes. Finally, the optimal ship hull principal dimensions scheme is obtained. The example demonstration verified the proposed method’s validity for ship hull principal dimensions optimization economic performance.

  8. Ship Hull Principal Dimensions Optimization Employing Fuzzy Decision-Making Theory

    OpenAIRE

    Jianping, Chen; Jie, Xu; You, Gong; Li, Xu

    2016-01-01

    The paper presents an optimization method for the ship hull principal dimensions scheme employing the fuzzy decision-making theory. First of all, the paper establishes the fuzzy decision-making model of the ship hull principal dimensions optimization, and then a series of ship hull principal dimensions schemes are accordingly constructed by employing the variable value method. On the basis of this, the fuzzy decision-making method is employed to evaluate the series ship hull principal dimensi...

  9. Maintained ship hull girder ultimate strength reliability considering corrosion and fatigue

    DEFF Research Database (Denmark)

    Hu, Yong; Cui, W.; Pedersen, Preben Terndrup

    2004-01-01

    The prupose of this paper is to propose a methodology to assess the time-variant ultimate strength of ship hull girder under the degradations of corrosion and fatigue. The effects of fatigue cracks on the tensile and compressive residual ultimate strength of stiffened panels and unstiffened plates...... developed is illustrated by application to a tanker. For a given set of inspection and repair criteria, the ultimate bending moment and reliability as a function of ship age is predicted....

  10. Research development of buckling and ultimate strength of hull plate and stiffened panel

    Directory of Open Access Journals (Sweden)

    CHEN Yanting

    2017-01-01

    Full Text Available Buckling and ultimate strength of hull plate and stiffened panel are important contents in the de-sign of ship structures,have achieved plenteous results in recent years. The research development of buck-ling and ultimate strength of steel hull plate and stiffened panel in the past decade at home and abroad is re-viewed for the convenience of carrying out studies and researches. The case of static loading is emphatical-ly described,the cyclic loading and dynamic loading are also introduced. A systematical overview is pre-sented for intact structures and damaged structures under single load or combined loads,in accordance with four kinds of research methods,which are experiment,numerical computation method,analytical method and comprehensive approach. The superiority and inferiority of each research method are assessed. Significant achievements are summarized,and six further problems are identified for the future study.

  11. On the effects of hull-girder vibration upon fatigue strength of a Post-Panamax container ship disaggregated by short-term sea state

    Directory of Open Access Journals (Sweden)

    Fukasawa Toichi

    2014-06-01

    Full Text Available The effects of hull-girder vibration on the fatigue strength of a Post-Panamax container ship are discussed in the present paper. Firstly, the short-term sea states are categorized according to the occurrence probability of each sea state. Time histories of hull-girder stress in short-term sea states are calculated by means of a nonlinear simulation code of ship response assuming that the hull-girder is rigid and flexible. Then, the calculated stress peaks are processed by the rainflow counting method, where two different counting procedures are used based on the considerations of crack propagation behaviors. Finally, the fatigue damage in life time of the ship in each categorized short-term sea state is estimated by means of Miner’s rule. Based on the calculated results, the effects of hull-girder vibrations on the fatigue damage are clarified by disaggregated damage from short-term sea state.

  12. On the effects of hull-girder vibration upon fatigue strength of a Post-Panamax container ship disaggregated by short-term sea state

    Directory of Open Access Journals (Sweden)

    Toichi Fukasawa

    2014-06-01

    Full Text Available The effects of hull-girder vibration on the fatigue strength of a Post-Panamax container ship are discussed in the present paper. Firstly, the short-term sea states are categorized according to the occurrence probability of each sea state. Time histories of hull-girder stress in short-term sea states are calculated by means of a nonlinear simulation code of ship response assuming that the hull-girder is rigid and flexible. Then, the calculated stress peaks are processed by the rainflow counting method, where two different counting procedures are used based on the considerations of crack propagation behaviors. Finally, the fatigue damage in life time of the ship in each categorized short-term sea state is estimated by means of Miner's rule. Based on the calculated results, the effects of hull-girder vibrations on the fatigue damage are clarified by disaggregated damage from short-term sea state.

  13. Unified strength theory and its applications

    CERN Document Server

    Yu, Mao-Hong

    2004-01-01

    This is a completely new theory dealing with the yield and failure of materials under multi-axial stresses. It provides a system of yield and failure criteria adopted for most materials, from metallic materials to rocks, concretes, soils, polymers etc. The Unified Strength Theory has been applied successfully to analyse the elastic limit, plastic limit capacities, the dynamic response behavior for some structures under static and moderate impulsive load, and may be implemented in some elasto-plastic finite element computer codes. The Unified Strength Theory is described in detail and by using this theory a series of results can be obtained. The Unified Strength Theory can improve the conservative Mohr-Coulomb Theory, and since intermediate principal stress is not taken into account in the Mohr-Coulomb theory and most experimental data is not pertainable to the Mohr-Coulomb Theory, a considerable economic benefit may be obtained. The book can also increase the effect of most commercial finite element computer ...

  14. Comparison of residual strength-grounding damage index diagrams for tankers produced by the ALPS/HULL ISFEM and design formula method

    Directory of Open Access Journals (Sweden)

    Do Kyun Kim

    2013-03-01

    Full Text Available This study compares the Residual ultimate longitudinal strength – grounding Damage index (R-D diagrams produced by two analysis methods: the ALPS/HULL Intelligent Supersize Finite Element Method (ISFEM and the design formula (modified Paik and Mansour method – used to assess the safety of damaged ships. The comparison includes four types of double-hull oil tankers: Panamax, Aframax, Suezmax and VLCC. The R-D diagrams were calculated for a series of 50 grounding scenarios. The diagrams were efficiently sampled using the Latin Hypercube Sampling (LHS technique and comprehensively analysed based on ship size. Finally, the two methods were compared by statistically analysing the differences between their grounding damage indices and ultimate longitudinal strength predictions. The findings provide a useful example of how to apply the ultimate longitudinal strength analysis method to grounded ships.

  15. Safety guidelines of ultimate hull girder strength for grounded container ships

    DEFF Research Database (Denmark)

    Kim, Do Kyun; Pedersen, Preben Terndrup; Paik, Jeom Kee

    2013-01-01

    Organization (IMO) is being developed in the literature. In this paper, the residual ultimate longitudinal strength versus grounding damage index diagram (R–D diagram) for container ships is established as per the method of Paik et al. (2012). The proposed R–D diagram should be useful for defining acceptance...... damage criteria and making rapid salvage plans or rescue schemes for container ships that have sustained a grounding accident. © 2013 Elsevier Ltd. All rights reserved....

  16. Assessment regarding the use of the computer aided analytical models in the calculus of the general strength of a ship hull

    Science.gov (United States)

    Hreniuc, V.; Hreniuc, A.; Pescaru, A.

    2017-08-01

    Solving a general strength problem of a ship hull may be done using analytical approaches which are useful to deduce the buoyancy forces distribution, the weighting forces distribution along the hull and the geometrical characteristics of the sections. These data are used to draw the free body diagrams and to compute the stresses. The general strength problems require a large amount of calculi, therefore it is interesting how a computer may be used to solve such problems. Using computer programming an engineer may conceive software instruments based on analytical approaches. However, before developing the computer code the research topic must be thoroughly analysed, in this way being reached a meta-level of understanding of the problem. The following stage is to conceive an appropriate development strategy of the original software instruments useful for the rapid development of computer aided analytical models. The geometrical characteristics of the sections may be computed using a bool algebra that operates with ‘simple’ geometrical shapes. By ‘simple’ we mean that for the according shapes we have direct calculus relations. In the set of ‘simple’ shapes we also have geometrical entities bounded by curves approximated as spline functions or as polygons. To conclude, computer programming offers the necessary support to solve general strength ship hull problems using analytical methods.

  17. Theory of Arched Structures Strength, Stability, Vibration

    CERN Document Server

    Karnovsky, Igor A

    2012-01-01

    Theory of Arched Structures: Strength, Stability, Vibration presents detailed procedures for analytical analysis of the strength, stability, and vibration of arched structures of different types, using exact analytical methods of classical structural analysis. The material discussed is divided into four parts. Part I covers stress and strain with a particular emphasis on analysis; Part II discusses stability and gives an in-depth analysis of elastic stability of arches and the role that matrix methods play in the stability of the arches; Part III presents a comprehensive tutorial on dynamics and free vibration of arches, and forced vibration of arches; and Part IV offers a section on special topics which contains a unique discussion of plastic analysis of arches and the optimal design of arches.

  18. John Hull and the Money Culture

    Science.gov (United States)

    Attfield, David

    2008-01-01

    John Hull's recent educational writings have included several on what he calls the "money culture". This is analysed and criticised in this article. Hull offers a Marxist and a neo-Marxist account of the role of money in western societies utilising the labour theory of value, false consciousness and the materialist interpretation of history. It is…

  19. Random matrix theory for transition strengths: Applications and open questions

    Science.gov (United States)

    Kota, V. K. B.

    2017-12-01

    Embedded random matrix ensembles are generic models for describing statistical properties of finite isolated interacting quantum many-particle systems. A finite quantum system, induced by a transition operator, makes transitions from its states to the states of the same system or to those of another system. Examples are electromagnetic transitions (then the initial and final systems are same), nuclear beta and double beta decay (then the initial and final systems are different) and so on. Using embedded ensembles (EE), there are efforts to derive a good statistical theory for transition strengths. With m fermions (or bosons) in N mean-field single particle levels and interacting via two-body forces, we have with GOE embedding, the so called EGOE(1+2). Now, the transition strength density (transition strength multiplied by the density of states at the initial and final energies) is a convolution of the density generated by the mean-field one-body part with a bivariate spreading function due to the two-body interaction. Using the embedding U(N) algebra, it is established, for a variety of transition operators, that the spreading function, for sufficiently strong interactions, is close to a bivariate Gaussian. Also, as the interaction strength increases, the spreading function exhibits a transition from bivariate Breit-Wigner to bivariate Gaussian form. In appropriate limits, this EE theory reduces to the polynomial theory of Draayer, French and Wong on one hand and to the theory due to Flambaum and Izrailev for one-body transition operators on the other. Using spin-cutoff factors for projecting angular momentum, the theory is applied to nuclear matrix elements for neutrinoless double beta decay (NDBD). In this paper we will describe: (i) various developments in the EE theory for transition strengths; (ii) results for nuclear matrix elements for 130Te and 136Xe NDBD; (iii) important open questions in the current form of the EE theory.

  20. Effect of corrosion on the ship hull of a double hull very large crude oil carrier

    Science.gov (United States)

    Vu Van, Tuyen; Yang, Ping

    2017-09-01

    This study aims to examine and analyze the effect of corrosion wastage on the ship hull of a double hull very large crude oil carrier. To calculate the ultimate bending moment capacity, along with the neutral axis position at the limit state, section modulus, and moment of inertia, the incremental-iterative method is employed. This paper also considered the residual strength checking criteria of ship hull and the ultimate stress behaviors of the representative structural elements. Then, Paik's probabilistic corrosion, which employs two levels of corrosion rate and three different assumptions of coating life time, is applied to assess the corrosion effects. The calculation results obtained through relevant analyses are also presented.

  1. Wave induced extreme hull girder loads on containerships

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher; Pedersen, Preben Terndrup; Shi, Bill

    2009-01-01

    This paper provides simple but rational procedures for prediction of extreme wave – induced sectional hull girder forces with reasonable engineering accuracy. The procedures take into account main ship hull characteristics such as: length, breadth, draught, block coefficient, bow flare coefficient......, forward speed and hull flexibility. The vertical hull girder loads are evaluated for specific operational profiles. Firstly a quadratic strip theory is presented which can give separate predictions for the hogging and sagging bending moments and shear forces and for hull girder loads. Then this procedure...... is based on rational methods it can be applied for novel single hull ship types not presently covered by the rules of the classification societies or to account for specific operational profiles....

  2. Dynamic Planar Convex Hull

    DEFF Research Database (Denmark)

    Jacob, Riko

    We determine the computational complexity of the dynamic convex hull problem in the planar case. We present a data structure that maintains a finite set of n points in the plane under insertion and deletion of points in amortized O(log n) time per operation. The space usage of the data structure...... is O(n). The data structure supports extreme point queries in a given direction, tangent queries through a given point, and queries for the neighboring points on the convex hull in O(log n) time. The extreme point queries can be used to decide whether or not a given line intersects the convex hull......, and the tangent queries to determine whether a given point is inside the convex hull. The space usage of the data structure is O(n). We give a lower bound on the amortized asymptotic time complexity that matches the performance of this data structure....

  3. Understanding Hydrogen Atom Transfer: from Bond Strengths to Marcus Theory

    Science.gov (United States)

    MAYER, JAMES M.

    2010-01-01

    CONSPECTUS Hydrogen atom transfer (HAT) is one of the most fundamental chemical reactions: A–H + B → A + H–B. It is a key step in a wide range of chemical, environmental, and biological processes. Traditional HAT involves p-block radicals such as tBuO• abstracting H• from organic molecules. More recently, it has been recognized that many transition metal species undergo HAT. This has led to a broader perspective, with HAT viewed as one type of proton-coupled electron transfer (PCET). When transition metal complexes oxidize substrates by removing H• (≡ e– and H+), typically the electron transfers to the metal and the proton transfers to a ligand. Two examples are shown in the Figure: iron-imidazolinate and vanadium-oxo complexes. Although such reagents do not “look like” main group radicals, they have the same pattern of reactivity. For instance, their HAT rate constants parallel the A–H bond strengths within a series of similar reactions. Just like main group radicals, they abstract H• much faster from O–H bonds than from C–H bonds of the same strength. This shows that driving force is not the only determinant of reactivity. We have found that HAT reactivity is well described using a Marcus-theory approach. In the simplest model, the cross relation, kAH/B = (kAH/AkBH/BKeqf)½, predicts the rate constant for AH + B in terms of the self-exchange rate constants (kAH/A for AH + A) and the equilibrium constant. For a variety of transition metal oxidants, kAH/B is predicted within one or two orders of magnitude with only a few exceptions. For 36 organic reactions of oxyl radicals, kAH/B is predicted with an average deviation of a factor of 3.8, and within a factor of 5 for all but six of the reactions. These reactions involve both O–H or C–H bonds, occur either in water or organic solvents, and over a range of 1028 in Keq and 1013 in kAH/B. The treatment of organic reactions of O–H bonds includes the well-established kinetic solvent

  4. Effective Hull IMMR plan

    Energy Technology Data Exchange (ETDEWEB)

    Franco, Mireille

    2010-07-01

    The objective of the Hull Inspection, Maintenance and Repair Plan is to ensure the total integrity of the Floating Production Unit. To be efficient, the Monitoring has to be part of the Hull Inspection, Monitoring, Maintenance and Repair Plan (IMMR). The IMMR Plan should be developed during the design and project phases and take into account the interfaces between the different systems and teams' tasks in operation. The IMMR is multidisciplinary and form part of the hand-over to ensure an efficient and early implementation. Implementation of such a complex plan requires: - Cross-functionality: take advantage of the synergies - Boldness: break the mould and think outside the box - Listening: be attentive, be available, - Mutual support: during good and bad times. This paper presents the way Total believe the Hull IMMR Plan shall be developed, implemented and followed up. (Author)

  5. Integrating attentional control theory and the strength model of self-control

    National Research Council Canada - National Science Library

    Englert, Chris; Bertrams, Alex

    2015-01-01

    In the present article, we argue that it may be fruitful to incorporate the ideas of the strength model of self-control into the core assumptions of the well-established attentional control theory (ACT...

  6. On coreflective hulls in

    African Journals Online (AJOL)

    topological spaces in the category [0; 1]-TOP of [0; 1]-topological spaces. We also show that the coreflective hull of a single-point s[0; 1]-topological space in the category s[0; 1]-TOP of stratified [0; 1]-topological spaces is the category of discrete [0; ...

  7. Dynamic Planar Convex Hull

    DEFF Research Database (Denmark)

    Brodal, Gerth Stølfting; Jacob, Rico

    2002-01-01

    In this paper we determine the computational complexity of the dynamic convex hull problem in the planar case. We present a data structure that maintains a finite set of n points in the plane under insertion and deletion of points in amortized O(log n) time per operation. The space usage of the d...

  8. Adult active transportation: adding habit strength to the Theory of Planned Behavior

    NARCIS (Netherlands)

    de Bruijn, G.J.; Kremers, S.P.J.; Singh, A.; van den Putte, B.; van Mechelen, W.

    2009-01-01

    Background: Many health behaviors have a history of repetition and, as a result, may become habitual. Because including a measure of habit strength may add depth to current theoretical models on health behavior, the present study explored the issue of habit strength within the context of the theory

  9. Hydrodynamic modeling of semi-planing hulls with air cavities

    Directory of Open Access Journals (Sweden)

    Konstantin I. Matveev

    2015-05-01

    Full Text Available High-speed heavy loaded monohull ships can benefit from application of drag-reducing air cavities under stepped hull bottoms. The subject of this paper is the steady hydrodynamic modeling of semi-planing air-cavity hulls. The current method is based on a linearized potential-flow theory for surface flows. The mathematical model description and parametric calculation results for a selected configuration with pressurized and open air cavities are presented.

  10. Rigorous Limits on the Interaction Strength in Quantum Field Theory

    CERN Document Server

    Caracciolo, Francesco

    2009-01-01

    We derive model-independent, universal upper bounds on the Operator Product Expansion (OPE) coefficients in unitary 4-dimensional Conformal Field Theories. The method uses the conformal block decomposition and the crossing symmetry constraint of the 4-point function. In particular, the OPE coefficient of three identical dimension $d$ scalar primaries is found to be bounded by ~ 10(d-1) for 1

  11. Field-Strength Formulation and Duality Transformation of Non-Abelian Gauge Theory

    OpenAIRE

    Kiyomi, ITABASHI; Department of Physics, Tohoku University

    1981-01-01

    Adopting the gauge A_μ^ax_μ=0, the field-strength representation of the generating functional Z for non-Abelian gauge theory is constructed and the duality transformation of Z is performed. In the resultant dual theory, the "dual potential" B_μ^a obeys again the condition B_μ^ax_μ=0. It is found that, in the weak-coupling (small-g) limit, the theory is approximately self-dual, whereas for the large-g region the resultant form of the dual theory is such that it makes a kind of strong-coupling ...

  12. Grene and Hull on types and typological thinking in biology.

    Science.gov (United States)

    Honenberger, Phillip

    2015-04-01

    Marjorie Grene (1910-2009) and David Hull (1935-2010) were among the most influential voices in late twentieth-century philosophy of biology. But, as Grene and Hull pointed out in published discussions of one another's work over the course of nearly forty years, they disagreed strongly on fundamental issues. Among these contested issues is the role of what is sometimes called "typology" and "typological thinking" in biology. In regard to taxonomy and the species problem, Hull joined Ernst Mayr's construal of typological thinking as a backward relic of pre-Darwinian science that should be overcome. Grene, however, treated the suspicion of typological thinking that characterized Hull's views, as well as those of other architects of the New Evolutionary Synthesis, as itself suspicious and even unsustainable. In this paper I review three debates between Grene and Hull bearing on the question of the validity of so-called typological thinking in biology: (1) a debate about the dispensability of concepts of "type" within evolutionary theory, paleontology, and taxonomy; (2) a debate about whether species can be adequately understood as individuals, and thereby independently of those forms of thinking Hull and Mayr had construed as "typological"; and (3) a debate about the prospects of a biologically informed theory of human nature. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Tracing structure, tie Strength, and cognitive networks in LMX theory and research

    OpenAIRE

    Sparrowe, Raymond T.; Emery, Cécile

    2015-01-01

    This chapter reflects on the growing relationship between Leader–Member Exchange (LMX) theory and research and social network analysis. We first discuss the themes of structure and tie strength in relation to several of the theoretical formulations of LMX theory that have served as the foundation for subsequent research. This section proceeds chronologically, beginning with the earliest work on the Vertical Dyad Linkage (as the LMX perspective was initially known) and concluding with recent e...

  14. Characterizations of boundary pluripolar hulls

    NARCIS (Netherlands)

    Djire, I.K.; Wiegerinck, J.

    2016-01-01

    We present some basic properties of the so-called boundary relative extremal function and discuss boundary pluripolar sets and boundary pluripolar hulls. We show that for B-regular domains the boundary pluripolar hull is always trivial on the boundary of the domain and present a “boundary version”

  15. Understanding college students’ fruit consumption: integrating habit strength in the theory of planned behavior

    NARCIS (Netherlands)

    de Bruijn, G.J.

    2010-01-01

    The additive and interactive effect of habit strength in the explanation of young adults’ fruit consumption was studied within the context of the theory of planned behaviour (TPB). Additionally, behavioural and control beliefs were modelled as predictors of profile membership based on current fruit

  16. Engineering Hydrodynamic AUV Hulls

    Science.gov (United States)

    Allen, J.

    2016-12-01

    AUV stands for autonomous underwater vehicle. AUVs are used in oceanography and are similar to gliders. MBARIs AUVs as well as other AUVs map the ocean floor which is very important. They also measure physical characteristics of the water, such as temperature and salinity. My science fair project for 4th grade was a STEM activity in which I built and tested 3 different AUV bodies. I wanted to find out which design was the most hydrodynamic. I tested three different lengths of AUV hulls to see which AUV would glide the farthest. The first was 6 inches. The second was 12 inches and the third was 18 inches. I used clay for the nosecone and cut a ruler into two and made it the fin. Each AUV used the same nosecone and fin. I tested all three designs in a pool. I used biomimicry to create my hypothesis. When I was researching I found that long slim animals swim fastest. So, my hypothesis is the longer AUV will glide farthest. In the end I was right. The longer AUV did glide the farthest.

  17. Wave-induced Ship Hull Vibrations in Stochastic Seaways

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher; Dogliani, M.

    1996-01-01

    A theoretical Study is undertaken on the determination of wave-induced loads in flexible ship hulls. The calculations are performed within the framework of a non-linear, quadratic strip theory formulated in the frequency domain. Included are non-linear effects due to changes in added mass......, hydrodynamic damping and water line breadth with sectional immersion in waves. The study is limited to continuous excitations from the waves and thus transient so-called whipping vibrations due to slamming loads are not considered.Because of the non-linearities the ship hull responses become non...... to the large separation between dominating wave frequencies and the lowest two-node frequency of the hull beam. Both extreme value predictions and fatigue damage are considered.For a fast container ship the rigid body and two-node (springing) vertical wave-induced bending moments amidship are calculated...

  18. Transition strengths in 21 , 22 , 23Mg as tests of ab initio theory

    Science.gov (United States)

    Henderson, Jack; Ruotsalainen, Panu; Hackman, Greg; Experiment S1480 Team; Experiment S1624 Team; Experiment S1646 Team

    2017-09-01

    Effective charges compensate for insufficiencies arising from truncations of the nuclear model-space by performing a crude inflation of nucleon charges to account for missing electric-quadrupole (E 2) transition strength. Recent theoretical developments in ab initio nuclear theory might allow for the calculation of this strength using evolved effective-operators arising from first-principles, removing the need for effective charges and enhancing predictive power. To that end, Coulomb excitation measurements were performed of neutron-deficient 21 , 22 , 23Mg at TRIUMF-ISAC, with the goal of extracting precision E 2 strengths for comparison with state-of-the-art models. Results will be presented and compared with ab initio in-medium similarity renormalization group (IM-SRG) and symplectic no-core shell-model calculations, as well as phenomenological shell-model results. Results will also be presented in the context of mirror-pairs in the sd -shell, providing a systematic evaluation of the reproduction of E 2 strength with respect to isospin.

  19. Adsorption of aqueous copper on peanut hulls

    Science.gov (United States)

    Davis, Kanika Octavia

    A method was established for measuring the adsorption of Cu(II) from aqueous solution to unmodified and modified peanut hulls at constant temperature and pH. Modification of the hulls was performed by oxidation with alkaline hydrogen peroxide. During the modification process, the hydrogen peroxide solubilizes the lignin component, making the surface more porous which increases the availability of binding sites, while simultaneously oxidizing the cellulose. The oxidation of alcohol groups creates more binding sites by creating functional groups such as COO-, which increases chelation to metal ions. Fourier transform infrared spectroscopy confirms delignification of the peanut hulls by the disappearance of carboxyl peaks of the modified hulls, which were originally produced from the lignin content. Although, oxidation is not fully confirmed, it is not ruled out because the expected carboxylate peak (1680 cm-1) maybe overshadowed by a broad peak due to OH bending of water adsorbed to the hulls. Hulls adsorbed copper from solutions in the concentration range of 50-1000 ppm of CuCl2. Concentrations of pre- and post-adsorption solutions were determined using inductively coupled plasma optical emission spectroscopy. The adsorption isotherms were fit to known two and three-parameter models, evaluated and the binding mechanism was inferred. Maximum surface coverage was 3.5 +/- 0.6 mg Cu2+ /g hull for unmodified hulls and 11 +/- 1 mg Cu2+/g hull for modified hulls. The adsorption for the hulls is best described by the Langmuir model, suggesting monolayer, homogeneous adsorption. With a free energy of adsorption of 10.5 +/- 0.9 kJ/mol for unmodified hulls and 14.5 +/-0.4 kJ/mol for modified hulls, the process is categorized as chemisorption for both types of hulls. The adsorption for both hulls is also described by the Redlich-Peterson model, giving beta nearer to 1 than 0, which further suggests homogeneous adsorption described by the Langmuir model. After rinsing the hulls

  20. Assessment of residual ultimate strength of cracked plates under biaxial compression

    Directory of Open Access Journals (Sweden)

    LU Yabing

    2017-10-01

    Full Text Available [Objectives] Such ship hull structures as inner bottom plates always bear complex loads involving the longitudinal bending stress and transverse in-plane stress transferred from the ship's side plates under water pressure. Additionally,the cracks that are likely to occur in welded joints and local stress concentration areas degrade the load bearing capacity of ship plates,so it is very important to assess the ultimate strength of cracked plates under biaxial compression. [Methods] First,the qualitative expression of the residual ultimate strength of cracked hull plates is deduced in theory. Next,the factors that influence residual ultimate strength are investigated by carrying out a series of Finite Element Analyses,including the length and inclined angle of the crack,aspect ratio and slenderness ratio of ship plate,and ratio between transverse and longitudinal in-plane stress,and an approach for the effective projected length of an inclined crack is obtained. Based on the numerical results,a simple empirical formula is proposed to calculate the residual ultimate strength of central cracked hull plates under biaxial compression.[Results] According to a relative error analysis,the caculated results has higher accuracy by the proposed formula,[Conclusions] whick can be used to accurately calculate the longitudinal ultimate strength of inner bottom plates.

  1. Saturated fat consumption and the Theory of Planned Behaviour: exploring additive and interactive effects of habit strength

    NARCIS (Netherlands)

    de Bruijn, G.J.; Kroeze, W.; Oenema, O.; Brug, J.

    2008-01-01

    The additive and interactive effects of habit strength in the explanation of saturated fat intake were explored within the framework of the Theory of Planned Behaviour (TPB). Cross-sectional data were gathered in a Dutch adult sample (n = 764) using self-administered questionnaires and analyzed

  2. Motivated Implicit Theories of Personality: My Weaknesses Will Go Away, but My Strengths Are Here to Stay.

    Science.gov (United States)

    Steimer, Andreas; Mata, André

    2016-04-01

    Across six studies, this research found consistent evidence for motivated implicit theories about personality malleability: People perceive their weaknesses as more malleable than their strengths. Moreover, motivation also influences how people see themselves in the future, such that they expect their present strengths to remain constant, but they expect their present weaknesses to improve in the future. Several additional findings suggest the motivational nature of these effects: The difference in perceived malleability for strengths versus weaknesses was only observed for the self, not for other people. When the desirability of possessing a certain trait was manipulated, that trait was perceived to be more malleable when it was depicted as undesirable. And these different beliefs that people have about how malleable their traits are, and how they will develop in the future, were associated with their desire for change, which is higher for weaknesses versus strengths. © 2016 by the Society for Personality and Social Psychology, Inc.

  3. Fabrication of renewable biocomposites from soy hull and bioplastics

    Science.gov (United States)

    Nanda, Malaya Ranjan

    This is an investigation for fabrication of biocomposites from soy hull and bioplastics like polylactide (PLA) and polyhydroxy butyrate-co- valerate (PHBV). The study was divided into three parts; the first was the development of a suitable PHBV/PLA blend. The second part involved the fabrication of composites from soy hull and PHBV/PLA blend and its comparison with polypropylene (PP)/soy hull composites. The third part was the effect of compatibilizer on the performance of the composites. From tensile study, the elongation of an optimized blend was found to be improved by 148 and 250% over the virgin polymers PHBV and PLA respectively. Scanning electron microscope revealed a stronger fiber-matrix interaction in PHBV/PLA composites over PP composites. Furthermore, the compatibilizer improved the impact and flexural strength by 56 and 32% respectively over the un-compatibilized counterpart; more significantly the resulting compatibilized composites showed improved hydrophobicity by more than 22% over un-compatibilized counterpart.

  4. HULLED WHEAT FARMING IN DEVELI

    Directory of Open Access Journals (Sweden)

    Sancar Bulut

    2016-07-01

    Full Text Available Emmer (Triticum dicoccum and einkorn (T. monococcum cultivation has a long history in Anatolia. The crops, cultivated in Anatolia over thousands years, can still be found in some parts of the country, especially Develi in the Kayseri province. The total cultivation area of these crops was around 36 000 ha in 2015. The species is mainly cultivated in sloping and marginal lands by poor farmers, where no other crops can be economically grown. Cultivation area is rapidly declining, and if such trend continues, hulled wheats will be shortly completely wiped out from Turkey. Present-day distribution of emmer and spelt within Turkey is concentrated in countryside areas of Develi where traditional farming systems still survive. This group of wheats is called in Turkish the general name of ‘kaplìca’ which means ‘covered’ or ‘hulled’. More specifically, the tetraploid species (emmer is called ‘gacer’ in the Develi. Being a low-yielding type of wheat, emmer was replaced by other improved varieties of Triticum. This decrease was mainly due to the widespread use of improved cultivars of wheat and the adoption of new agricultural techniques, but also to social and economic factors. In fact, wheat yielded 2840 t/ha, whereas hulled wheats yielded 1200 t/ha. The cultivation of these two crops shows disadvantages that relate to the harvesting techniques used and the need to dehisce the spikelets to obtain the grain for human consumption. The increasing interest in low-input systems due to the actual ecological and economical situation has led to a growing interest in specific genetic variability. Organic agriculture and health food products have been gaining increasing popularity that has led to a renewed interest in hulled wheat species such as emmer and spelt. The objective of this study was to estimate agronomical and grain quality characteristics of some Turkey (Develi emmer landraces. This effort was motivated by the fact that autochthonous

  5. 46 CFR 154.174 - Transverse contiguous hull structure.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Transverse contiguous hull structure. 154.174 Section... Equipment Hull Structure § 154.174 Transverse contiguous hull structure. (a) The transverse contiguous hull structure of a vessel having cargo containment systems without secondary barriers must meet the standards of...

  6. 46 CFR 154.176 - Longitudinal contiguous hull structure.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Longitudinal contiguous hull structure. 154.176 Section... Equipment Hull Structure § 154.176 Longitudinal contiguous hull structure. (a) The longitudinal contiguous hull structure of a vessel having cargo containment systems without secondary barriers must meet the...

  7. 46 CFR 151.10-20 - Hull construction.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Hull construction. 151.10-20 Section 151.10-20 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Barge Hull Construction Requirements § 151.10-20 Hull construction. (a) Construction features. (1) Each barge hull shall be constructed with a suitable bow form...

  8. Pressure Hull Analysis under Shock Loading

    Directory of Open Access Journals (Sweden)

    Ya-Jung Lee

    2008-01-01

    Full Text Available The hull of high performance submarines must resist underwater shock loading due to exploding torpedoes or depth bombs. An underwater shock involving an initial shock wave and successive bubble pulsating waves is so complex that a theoretical technique for deriving shock pressure distribution is required for improving simulation efficiency. Complete shock loading is obtained theoretically in this work, and responses of a submarine pressure hull are calculated using ABAQUS USA (Underwater Shock Analysis codes. In the long run, this deflection and stress data will assist in examining the structural arrangement of the submarine pressure hull.

  9. A new approach to hull consistency

    Directory of Open Access Journals (Sweden)

    Kolev Lubomir

    2016-06-01

    Full Text Available Hull consistency is a known technique to improve the efficiency of iterative interval methods for solving nonlinear systems describing steady-states in various circuits. Presently, hull consistency is checked in a scalar manner, i.e. successively for each equation of the nonlinear system with respect to a single variable. In the present poster, a new more general approach to implementing hull consistency is suggested which consists in treating simultaneously several equations with respect to the same number of variables.

  10. Estimation of hull girder vertical bending moments including non-linear and flexibility effects using closed form expressions

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Jensen, Jørgen Juncher

    2009-01-01

    A simple but rational procedure for prediction of extreme wave-induced hull girder bending moment is presented. The procedure takes into account main ship hull characteristics such as: length, breadth, draught, block coefficient, bow flare coefficient, forward speed and hull flexibility. The wave......-induced loads are evaluated for specific operational profiles. Non-linearity in the wave bending moment is modeled using results derived from a second-order strip theory and water entry solutions for wedge type sections. Hence, bow flare slamming is accounted for through a momentum type of approach......-linear strip theory calculations and supplemented with new closed form results for the hogging bending moment. Focus is on the extreme hull girder hogging bending moment. Due to the few input parameters this procedure can be used to estimate the wave-induced bending moments at the conceptual design phase...

  11. RESEARCH ON HULL-FORM OPTIMIZATION OF A PASSENGER SHIP USING HULL-FORM MODIFICATION ALGORITHM WITH GAUSSIAN DISTRIBUTION FUNCTION

    Directory of Open Access Journals (Sweden)

    Hee-Jong Choi

    2016-09-01

    Full Text Available The present study proposes an automatic hull form control algorithm to effectively control the hull form of a ship. A Gaussian distribution function is implemented in the proposed algorithm that automatically controls the hull form in conjunction with an optimization algorithm that is executed during the hull form optimization procedure. The hull form optimization algorithm adopts sequential quadratic programming for the optimizer, and the wave-making resistance is used as an objective function and is solved using the potential-based panel method. A high-speed passenger ship is selected as the target ship, and the results of a numerical analysis of the original hull are compared to those of the optimized hull obtained using the hull form optimization in order to verify the effectiveness of the hull-form optimization technique using the proposed automatic hull form control algorithm.

  12. RESEARCH ON HULL-FORM OPTIMIZATION OF A PASSENGER SHIP USING HULL-FORM MODIFICATION ALGORITHM WITH GAUSSIAN DISTRIBUTION FUNCTION

    Directory of Open Access Journals (Sweden)

    Hee-Jong Choi

    2016-08-01

    Full Text Available The present study proposes an automatic hull form control algorithm to effectively control the hull form of a ship. A Gaussian distribution function is implemented in the proposed algorithm that automatically controls the hull form in conjunction with an optimization algorithm that is executed during the hull form optimization procedure. The hull form optimization algorithm adopts sequential quadratic programming for the optimizer, and the wave-making resistance is used as an objective function and is solved using the potential-based panel method. A high-speed passenger ship is selected as the target ship, and the results of a numerical analysis of the original hull are compared to those of the optimized hull obtained using the hull form optimization in order to verify the effectiveness of the hull-form optimization technique using the proposed automatic hull form control algorithm.

  13. Static analysis of the hull plate using the finite element method

    Science.gov (United States)

    Ion, A.

    2015-11-01

    This paper aims at presenting the static analysis for two levels of a container ship's construction as follows: the first level is at the girder / hull plate and the second level is conducted at the entire strength hull of the vessel. This article will describe the work for the static analysis of a hull plate. We shall use the software package ANSYS Mechanical 14.5. The program is run on a computer with four Intel Xeon X5260 CPU processors at 3.33 GHz, 32 GB memory installed. In terms of software, the shared memory parallel version of ANSYS refers to running ANSYS across multiple cores on a SMP system. The distributed memory parallel version of ANSYS (Distributed ANSYS) refers to running ANSYS across multiple processors on SMP systems or DMP systems.

  14. Service robot for hull-blasting

    OpenAIRE

    Ortiz Zaragoza, Francisco José; Iborra García, Andrés José; Álvarez Torres, María Bárbara; Marín García, Fulgencio; Fernández Meroño, José María

    2001-01-01

    Present grit blasting technology for hull cleaning is very pollutant, environmentally unaffordable, and it is progressively forbidden in the most environmental countries (mainly north of Europe). At the time being, the above methodology has been partially substituted by ultra highpressure water blasting, however they do not show as good performance as the grit blasting systems. This paper describes a service robot for hull blasting. The technology we developed consists of the cleanin...

  15. Exercise habit strength, planning and the theory of planned behaviour: an action control approach

    NARCIS (Netherlands)

    de Bruijn, G.-J.

    2011-01-01

    Objectives Action control refers to the successful translation of intention into behaviour. The purpose of this study was to explore the potential usefulness of extending intention-exercise profiles with past exercise behaviour and exercise habit strength and the potential discriminative effect of

  16. Applications of Strengths-Based Leadership Theory for the U.S. Army

    Science.gov (United States)

    2012-09-01

    and positive institutions and communities (as cited in Clifton & Harter , 2003). The identification of positive personal and interpersonal traits... Harter , 2003). Identification of strengths has been shown to increase levels of happiness, fulfillment and confidence at home and work (Linley et al...and increase productivity and job satisfaction (Baruch-Feldman, Brondolo, Ben-Dayan, & Swartz, 2002; Clifton & Harter , 2003). By impacting job

  17. Assessment of oscillator strengths with multiconfigurational short-range density functional theory for electronic excitations in organic molecules

    DEFF Research Database (Denmark)

    Hedegård, Erik Donovan

    2017-01-01

    considered the large collection of organic molecules whose excited states were investigated with a range of electronic structure methods by Thiel et al. As a by-product of our calculations of oscillator strengths, we also obtain electronic excitation energies, which enable us to compare the performance......We have in a series of recent papers investigated electronic excited states with a hybrid between a complete active space self-consistent field (CASSCF) wave function and density functional theory (DFT). This method has been dubbed the CAS short-range DFT method (CAS–srDFT). The previous papers...

  18. Silica Derived from Burned Rice Hulls

    Directory of Open Access Journals (Sweden)

    M.F. de Souza

    2002-10-01

    Full Text Available Three new processes to obtain silica having high specific surface area from burned pre-treated rice hulls are presented and discussed. These procedures allow for the simultaneous recovery of biomass energy and the production of high quality silica at thermoelectric plants, without the risk of using corrosive substances in the burning process. The first method involves treatment of the hull with hot organic acid solutions before burning, the second with boiling water, both using an autoclave at temperatures close to150 °C, while the third method renders the hull fragile by treating it at 250 °C and reducing it to a fine powder before burning. The first two methods result in white amorphous silica that can show 500 m²/g of specific surface area. The third method, which does not remove the alkaline elements from the hull, produces an amorphous gray carbon-free powder whose specific surface area can be as high as 250 m²/g. An investigation of the specific surface area of the prepared silica indicates the alkaline elements are not mixed with silica in the hulls or combined as insoluble compounds. A comparison is made of these processes and the dissolution of silica by sodium hydroxide solutions is discussed.

  19. Physical properties of peanut hull pellets.

    Science.gov (United States)

    Fasina, O O

    2008-03-01

    Peanut hull (peanut pods and waste materials from processing of peanuts) was pelleted through a 3/16-in. (4.76 mm) diameter die. The effect of change in moisture content (4.2-21.2%, wet basis) of the pellets (due to exposure of the pellets to low or high humidity storage environments) on physical properties were measured. Pelleting increased the bulk density of the peanut hull from 151 kg/m(3) to more than 600 kg/m(3). Bulk density, particle density and durability of the pelleted peanut hull of pellets were significantly affected by moisture content attained by the pellets during exposure to the low or high humidity environment. Air relative humidity significantly influenced the rate at which the pellets exchange moisture with the environment while air temperature did not. The values of the constants of the GAB model were obtained from moisture sorption isotherm at 25 degrees C.

  20. Promoting strengths, prevention, empowerment, and community change through organizational development: lessons for research, theory, and practice.

    Science.gov (United States)

    Evans, Scotney D; Prilleltensky, Ora; McKenzie, Adrine; Prilleltensky, Isaac; Nogueras, Debbie; Huggins, Corinne; Mescia, Nick

    2011-01-01

    SPEC Learning and Changing by Doing is a three-year, action research, and organizational change project designed to ultimately promote social justice and well-being in the community. SPEC is an acronym that stands for Strengths, Prevention, Empowerment, and Community Change. The project consists of five organizations tackling internal organizational change in order to better promote justice and well-being in their respective constituencies. In this article we present a formative evaluation of this multicase study of organizational change in human services. This article contributes to the empirical and theoretical literature on organizational change in the nonprofit human service milieu.

  1. Probabilistic Structural Analysis of Ship Hull Longitudinal Strength.

    Science.gov (United States)

    1980-12-01

    7fo-v+VZ2 -6- #( 2+V7- V )1/2 (12) 11 Z. Vz2 . Vs2V )/ (2 I - 2VS2 - s=e mz (13) M o N vih ,-re: Y m= safety index ,. mn/, 0 - central safety factor...surface finish, load, heat treatment , direct surface environment, temperature, time, corrosion, etc. The approach given by Equation (18) has been

  2. Slow Dynamics and Strength Recovery in Unconsolidated Granular Earth Materials: A Mechanistic Theory

    Science.gov (United States)

    Lieou, Charles K. C.; Daub, Eric G.; Ecke, Robert E.; Johnson, Paul A.

    2017-10-01

    Rock materials often display long-time relaxation, commonly termed aging or "slow dynamics," after the cessation of acoustic perturbations. In this paper, we focus on unconsolidated rock materials and propose to explain such nonlinear relaxation through the shear-transformation-zone theory of granular media, adapted for small stresses and strains. The theory attributes the observed relaxation to the slow, irreversible change of positions of constituent grains and posits that the aging process can be described in three stages: fast recovery before some characteristic time associated with the subset of local plastic events or grain rearrangements with a short time scale, log linear recovery of the elastic modulus at intermediate times, and gradual turnover to equilibrium steady state behavior at long times. We demonstrate good agreement with experiments on aging in granular materials such as simulated fault gouge after an external disturbance. These results may provide insights into observed modulus recovery after strong shaking in the near surface region of earthquake zones.

  3. 46 CFR 154.180 - Contiguous hull structure: Welding procedure.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Contiguous hull structure: Welding procedure. 154.180 Section 154.180 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS... Equipment Hull Structure § 154.180 Contiguous hull structure: Welding procedure. Welding procedure tests for...

  4. 46 CFR 154.188 - Membrane tank: Inner hull steel.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Membrane tank: Inner hull steel. 154.188 Section 154.188... Structure § 154.188 Membrane tank: Inner hull steel. For a vessel with membrane tanks, the inner hull... “Rules for Building and Classing Steel Vessels”, 1981. ...

  5. 46 CFR 154.172 - Contiguous steel hull structure.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Contiguous steel hull structure. 154.172 Section 154.172... Structure § 154.172 Contiguous steel hull structure. (a) Except as allowed in paragraphs (b) and (c) of this... construction of the contiguous steel hull structure must meet the thickness and steel grade in Table 1 for the...

  6. Determination of digestibility of almond hull in sheep | Yalchi ...

    African Journals Online (AJOL)

    A study was conducted to determine the chemical composition and digestibility of almond hull using in vitro, sacco and vivo methods. Chemical compositions of almond hull and alfalfa hay were determined. The crude protein (CP), neutral detergent fiber (NDF) and acid detergent fiber (ADF) of almond hull were lower than ...

  7. 46 CFR 154.178 - Contiguous hull structure: Heating system.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Contiguous hull structure: Heating system. 154.178... Equipment Hull Structure § 154.178 Contiguous hull structure: Heating system. The heating system for... the heating capacity to meet § 154.174(b)(2) or § 154.176(b)(2); (b) Have stand-by heating to provide...

  8. Multi-Hull Flow Visualization: An Investigation of Flow Visualization Techniques for Trimaran Hulls

    National Research Council Canada - National Science Library

    Denz, Thomas; Smith, Stephanie; Shrestha, Rajeev

    2007-01-01

    .... However, much is unknown about the hydrodynamic characteristics of multiple hulls. The objective of this study was to explore innovative techniques for qualitatively visualizing flow that could provide insight to aid designers...

  9. Chemical composition and nutritional characteristics of some hull less and hulled barley cultivars grown in India.

    Science.gov (United States)

    Jood, S; Kalra, S

    2001-02-01

    Three hull less and nine hulled barley cultivars were grown during 1995-96 at Research Farm, CCS Haryana Agricultural University, Hisar, India and were used for chemical analysis such as nutritional and antinutritional parameters. Dolma, a hull less barley cultivar had higher contents of protein, fat, starch, in vitro digestibility of protein and starch, in vitro availability of Ca, Fe and Zn. Hulled cultivar BH-331 showed higher values of phytic acid (925 mg/100 g), polyphenols (625 mg/100 g) and amylase inhibitor activity (169 AIU) which might have contributed towards poor in vitro digestibility of Ca, Fe and Zn. Phytic acid and polyphenols manifested significantly negative correlation with in vitro availability of Ca, Fe and Zn and protein digestibility. Whereas amylase inhibitor activity showed significant and negative correlation (-0.992) only with starch digestibility.

  10. RANS simulation of cavitation and hull pressure fluctuation for marine propeller operating behind-hull condition

    Directory of Open Access Journals (Sweden)

    Kwang-Jun Paik

    2013-12-01

    Full Text Available Simulations of cavitation flow and hull pressure fluctuation for a marine propeller operating behind a hull using the unsteady Reynolds-Averaged Navier-Stokes equations (RANS are presented. A full hull body submerged under the free surface is modeled in the computational domain to simulate directly the wake field of the ship at the propeller plane. Simulations are performed in design and ballast draught conditions to study the effect of cavitation number. And two propellers with slightly different geometry are simulated to validate the detectability of the numerical simulation. All simulations are performed using a commercial CFD software FLUENT. Cavitation patterns of the simulations show good agreement with the experimental results carried out in Samsung CAvitation Tunnel (SCAT. The simulation results for the hull pressure fluctuation induced by a propeller are also compared with the experimental results showing good agreement in the tendency and amplitude, especially, for the first blade frequency.

  11. "Keisri hull" on viimast korda laval

    Index Scriptorium Estoniae

    2010-01-01

    Neli hooaega Ugala repertuaaris olnud Jaan Krossi romaani põhjal lavastatud draama "Keisri hull" etendub viimast korda 10. veebruaril. Viimane etendus on pühendatud Jaan Krossi 90. sünniaastapäevale, mis on 19. veebruaril. Lavastajad Peeter Tammearu ja Jaak Allik. Peaosas Peeter Tammearu

  12. Transition metal alloying effect on the phosphoric acid adsorption strength of Pt nanoparticles: an experimental and density functional theory study.

    Science.gov (United States)

    Park, Hee-Young; Lim, Dong-Hee; Yoo, Sung Jong; Kim, Hyoung-Juhn; Henkensmeier, Dirk; Kim, Jin Young; Ham, Hyung Chul; Jang, Jong Hyun

    2017-08-03

    The effect of alloying with transition metals (Ni, Co, Fe) on the adsorption strength of phosphoric acid on Pt alloy surfaces was investigated using electrochemical analysis and first-principles calculations. Cyclic voltammograms of carbon-supported Pt3M/C (M = Ni, Co, and Fe) electrocatalysts in 0.1 M HClO4 with and without 0.01 M H3PO4 revealed that the phosphoric acid adsorption charge density near the onset potential on the nanoparticle surfaces was decreased by alloying with transition metals in the order Co, Fe, Ni. First-principles calculations based on density functional theory confirmed that the adsorption strength of phosphoric acid was weakened by alloying with transition metals, in the same order as that observed in the electrochemical analysis. The simulation suggested that the weaker phosphoric acid adsorption can be attributed to a lowered density of states near the Fermi level due to alloying with transition metals.

  13. A unifying theory of synaptic long-term plasticity based on a sparse distribution of synaptic strength

    Directory of Open Access Journals (Sweden)

    Daniel eKrieg

    2014-03-01

    Full Text Available Long-term synaptic plasticity is fundamental to learning and network function. It has been studied under various induction protocols and depends on firing rates, membrane voltage, and precise timing of action potentials.These protocols show different facets of a common underlying mechanism but they are mostly modeled as distinct phenomena.Here, we show that all of these different dependencies can be explained from a single computational principle.The objective is a sparse distribution of excitatory synaptic strength, which may help to reduce metabolic costs associated with synaptic transmission.Based on this objective we derive a stochastic gradient ascent learning rule which is of differential-Hebbian type.It is formulated in biophysical quantities and can be related to current mechanistic theories of synaptic plasticity.The learning rule accounts for experimental findings from all major induction protocols and explains a classic phenomenon of metaplasticity.Furthermore, our model predicts the existence of metaplasticity for STDP.Thus, we provide a theory of long-term synaptic plasticity that unifies different induction protocols and provides a connection between functional and mechanistic levels of description.

  14. Automatic welding systems for large ship hulls

    Science.gov (United States)

    Arregi, B.; Granados, S.; Hascoet, JY.; Hamilton, K.; Alonso, M.; Ares, E.

    2012-04-01

    Welding processes represents about 40% of the total production time in shipbuilding. Although most of the indoor welding work is automated, outdoor operations still require the involvement of numerous operators. To automate hull welding operations is a priority in large shipyards. The objective of the present work is to develop a comprehensive welding system capable of working with several welding layers in an automated way. There are several difficulties for the seam tracking automation of the welding process. The proposed solution is the development of a welding machine capable of moving autonomously along the welding seam, controlling both the position of the torch and the welding parameters to adjust the thickness of the weld bead to the actual gap between the hull plates.

  15. European single-hull regulation in force

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, Michael

    2004-07-01

    The European Union (EU)has decided that from 21 October 2003 no single-hull tanker carrying heavy grades of oil will be permitted to enter or leave ports or offshore installations or anchor in areas under the jurisdiction of the EU member states. Some of the provisions of the EU regulation will not be in force until 2010. The article looks back on what has led up to to the current regulations, beginning with the Titanic disaster of 1914.

  16. CFD simulation on Kappel propeller with a hull wake field

    DEFF Research Database (Denmark)

    Shin, Keun Woo; Andersen, Poul; Møller Bering, Rasmus

    2013-01-01

    for propeller designers and the computational effort can be reduced by excluding the hull. The CFD simulation of a propeller flow with a hull wake is verified in order to use CFD as a propeller design tool. A Kappel propeller, which is an innovative tip-modified propeller, is handled. Kappel propellers....... It is investigated how the accuracy is improved, as the wake field is modelled more precisely. The thrust variation and pressure distribution on the blade from the CFD simulation with the hull wake model are also analyzed.......Marine propellers are designed not for the open-water operation, but for the operation behind a hull due to the inhomogeneous hull wake and thrust deduction. The adaptation for the hull wake is important for the propulsive efficiency and cavitation risk especially on single-screw ships. CFD...

  17. Morphologically intelligent underactuated robot for underwater hull cleaning

    DEFF Research Database (Denmark)

    Souto, Daniel; Faina, Andres; López-Peña, Fernando

    2015-01-01

    In this paper we discuss a new type of robot for underwater hull cleaning on ships with non-magnetic hulls. This robot is based on the concept that cleaning hulls regularly, without waiting to take them out of the water, will improve the efficiency of the ships and will permit a reduction...... and constraints of the environment solves the most difficult problems that arise when moving along hulls. Some of these are changing planes, negotiating appendices, avoiding portholes, passing corners, and other elements. This greatly simplifies the control mechanisms that are required for its operation making...

  18. Hydrodynamics of single-deadrise hulls and their catamaran configurations

    Directory of Open Access Journals (Sweden)

    Ghazi S. Bari

    2017-05-01

    Full Text Available Asymmetric planing hulls are often used on high-speed catamarans. In this study, a linearized potential-flow method is applied for modeling steady hydrodynamics of single asymmetric hulls and their catamaran setups. Numerical results are validated with available experimental data and empirical correlations. Parametric calculation results are presented for the lift coefficient and the center of pressure for variable hull geometry, spacings, and speed regimes. The lift coefficient is found to increase at smaller hull spacings and decrease at higher Froude numbers and higher deadrise angles.

  19. Evaluation of Soybean Hulls in Grower Turkey Diets | Etuk ...

    African Journals Online (AJOL)

    A 42 day study was carried out to evaluate the effect of soybean hulls (SBH) in diets of grower turkeys. Four experimental turkey grower diets were formulated such that soybean hulls made up of 0.0 (control diet), 10.0, 20.0 and 30.0% of the diets respectively replacing maize and soybean meal. These diets were offered ...

  20. 46 CFR 115.655 - Hull examination reports.

    Science.gov (United States)

    2010-10-01

    ... sign the report and confirm the validity of its contents. (b) If you use an underwater remotely operated vehicle (ROV) as the predominate means to examine the vessel's underwater hull plating, you must... the underwater survey portion of the Alternative Hull Examination (AHE), you must provide the Officer...

  1. 46 CFR 176.655 - Hull examination reports.

    Science.gov (United States)

    2010-10-01

    ...) If you use an underwater remotely operated vehicle (ROV) as the predominate means to examine the vessel's underwater hull plating, you must provide the OCMI with a report in a format that is acceptable.... (a) If you use only divers for the underwater survey portion of the Alternative Hull Examination (AHE...

  2. 46 CFR 189.25-25 - Hull equipment.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Hull equipment. 189.25-25 Section 189.25-25 Shipping... CERTIFICATION Inspection for Certification § 189.25-25 Hull equipment. (a) At each inspection for certification... equipment: (1) All watertight doors shall be operated locally by manual power and also by hydraulic or...

  3. 46 CFR 115.645 - Alternative Hull Examination (AHE) Procedure.

    Science.gov (United States)

    2010-10-01

    ... underwater hull plating and a detailed examination of all hull welds, propellers, tailshafts, rudders, and... presence of a marine inspector once every five years; (4) Remove all passengers from the vessel when the sea valves are being examined, if required by the Officer in Charge, Marine Inspection (OCMI); (5...

  4. 33 CFR 181.29 - Hull identification number display.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Hull identification number display. 181.29 Section 181.29 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND... identification number display. Two identical hull identification numbers are required to be displayed on each...

  5. Properties of Moldings Prepared from LDPE-Pumpkin Seed Hulls Blend

    Directory of Open Access Journals (Sweden)

    Karolina Głogowska

    2017-12-01

    Full Text Available In recent decades, standard polymer blends for different applications have been more and more often replaced by blends containing raw materials. The use of natural materials as filler in thermoplastics brings both economic and environmental benefits. The use of a given vegetable filler depends on the geographic location and natural occurrence of the vegetables in a given geographic region. In Poland, for instance, the pumpkin is one of such vegetables. They are used for producing oil which is pressed from pumpkin seeds. Pumpkin seeds are then collected, dried and purified to produce waste material in hull form. Particles of ground pumpkin seed hulls with varying sizes and weight-in-weight concentration ranging from 0% to 20% relative to the matrix are used as filler in low-density polyethylene. Pumpkin seed hulls are ground and sieved. Four fractions of hulls with different particle sizes are produced: <0.2mm, 0.2mm-0.4mm, 0.4mm-0.6mm, 0.6mm-0.8mm. The paper reports the results of investigation of the mechanical properties, i.e., strength properties determined by static tensile testing and hardness measurement, of injection molds produced at constant processing parameters. In addition, the cross sections of the obtained products are subjected to microscopic examination. Relationships are determined between tensile modulus, maximum tensile stress, tensile stress at yield, maximum tensile strain, tensile strain at yield as well as Shore hardness and weigh-in-weight concentration of the powdered natural filler and its grain sizes. Finally, relevant conclusions are drawn.

  6. La analogía sociobiológica del desarrollo de la ciencia, la epistemología evolucionista de David Hull

    Directory of Open Access Journals (Sweden)

    Ruiz G., Rosaura

    1996-12-01

    Full Text Available The eminent philosopher of biology, David Hull has proposed that a "general theory of evolution" can be advanced that would account for the evolution of organisms as well as for the evolution of scientific knowledge. According to Hull, competition among scientists plays in conceptual evolution a similar essential role as competition among organisms plays in biological evolution. Hull uses the sociobiology tradition to explain the apparently altruistic behavior of scientists in the search for knowledge.

    David Hull, uno de los filósofos de la biología más destacados en la actualidad, propone una "Teoría general de evolución" que, afirma, explica tanto la evolución de los seres vivos como el desarrollo del conocimiento científico. En el caso de la evolución conceptual, Hull sostiene que la competencia entre científicos juega un papel esencial en el avance de la ciencia, de manera similar a lo que ocurre en la evolución biológica. Entre otras cuestiones Hull recupera la tradición de la sociobiología para la explicación del comportamiento aparentemente altruista de los científicos en la búsqueda del conocimiento.

  7. Boat Hull Blisters: Repair Techniques and Long Term Effects on Hull Degradation

    Science.gov (United States)

    1988-08-01

    blistering of boat hulls is a serious problem which affects many fiber- glass polyester boats. It can range from a surficial cosmetic problem to a deep...something present in the resin itself. We have reported blistering vhen sorbitol is added to the resin. Pritchard has reported on the role of excess glycol...Is blistering and water absorption only a cosmetic and surficial problem or does deep seated damage occur after prolonged water exposure? The

  8. Dilemma strength as a framework for advancing evolutionary game theory. Reply to comments on "Universal scaling for the dilemma strength in evolutionary games"

    Science.gov (United States)

    Wang, Zhen; Kokubo, Satoshi; Jusup, Marko; Tanimoto, Jun

    2015-09-01

    While comprehensive reviews of the literature, by gathering in one place most of the relevant information, undoubtedly steer the development of every scientific field, we found that the comments in response to a review article can be as informative as the review itself, if not more. Namely, reading through the comments on the ideas expressed in Ref. [1], we could identify a number of pressing problems for evolutionary game theory, indicating just how much space there still is for major advances and breakthroughs. In an attempt to bring a sense of order to a multitude of opinions, we roughly classified the comments into three categories, i.e. those concerned with: (i) the universality of scaling in heterogeneous topologies, including empirical dynamic networks [2-8], (ii) the universality of scaling for more general game setups, such as the inclusion of multiple strategies and external features [4,9-11], and (iii) experimental confirmations of the theoretical developments [2,12,13].

  9. Strength of materials and theory of elasticity in 19th century Italy a brief account of the history of mechanics of solids and structures

    CERN Document Server

    Capecchi, Danilo

    2015-01-01

    This book examines the theoretical foundations underpinning the field of strength of materials/theory of elasticity, beginning from the origins of the modern theory of elasticity. While the focus is on the advances made within Italy during the nineteenth century, these achievements are framed within the overall European context. The vital contributions of Italian mathematicians, mathematical physicists, and engineers in respect of the theory of elasticity, continuum mechanics, structural mechanics, the principle of least work, and graphical methods in engineering are carefully explained and discussed. The book represents a work of historical research that primarily comprises original contributions and summaries of work published in journals. It is directed at those graduates in engineering, but also in architecture, who wish to achieve a more global and critical view of the discipline and will also be invaluable for all scholars of the history of mechanics.

  10. Experimental Evaluation of the Hydrodynamic Response of Crew Boat Hulls

    DEFF Research Database (Denmark)

    Pecher, Arthur; Kofoed, Jens Peter

    This report presents the results of an experimental study on 3 different hulls of crew boats intended for service to offshore wind turbines. Their hydrodynamic behaviour has been tested in various sea states representing general wave conditions that could be expected at offshore wind farms. Two...... different directions. • The connection forces between the hulls and the wind turbine pile. • The natural frequency of oscillation. For the study, realistic scale models of the hulls of the crew boats were supplied by the client, Hauschildt Marine. The laboratory tests were performed by Arthur Pecher under...

  11. Corn fiber hulls as a food additive or animal feed

    Science.gov (United States)

    Abbas, Charles; Beery, Kyle E.; Cecava, Michael J.; Doane, Perry H.

    2010-12-21

    The present invention provides a novel animal feed or food additive that may be made from thermochemically hydrolyzed, solvent-extracted corn fiber hulls. The animal feed or food additive may be made, for instance, by thermochemically treating corn fiber hulls to hydrolyze and solubilize the hemicellulose and starch present in the corn fiber hulls to oligosaccharides. The residue may be extracted with a solvent to separate the oil from the corn fiber, leaving a solid residue that may be prepared, for instance by aggolmerating, and sold as a food additive or an animal feed.

  12. Study of integrated structure of mercury target container with safety hull

    Energy Technology Data Exchange (ETDEWEB)

    Kaminaga, Masanori; Terada, Atsuhiko; Haga, Katsuhiro; Kinoshita, Hidetaka; Ishikura, Shuichi; Hino, Ryutaro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-01-01

    The Japan Atomic Energy Research Institute (JAERI) and the High Energy Accelerator Research Organization (KEK) are promoting a plan to construct a neutron scattering facility. In the facility, 1 MW pulsed proton beam from a high-intensity proton accelerator will be injected into a mercury target in order to produce high-intensity neutrons. In the spallation mercury target system design, an integrated structure of target container with a safety hull was proposed to ensure the safety and to collect mercury in a case of mercury leakage caused by the target beam window failure. The inner structure arrangement of the mercury target container was determined based on the thermal hydraulic analytical results of 3 GeV, 1 MW proton beam injection. The safety hull consists of containers for helium and heavy water. The containers for mercury target, helium and heavy water will be connected each other by reinforcement ribs mounted on the surface of each container. As for the feasibility of the integrated mercury target container with the safety hull, the static structure strength analyses were carried out under the condition of an internal pressure of 0.8 MPa, which was determined based on the maximum operation pressure of 0.5 MPa and the safety margin, in order to clarify its structural strength. As a result, it was made clear that the maximum static stress appeared on the each container by the internal pressure could be suppressed less than the allowable stress of SUS316L at 300degC, 142.5 MPa, by adding reinforcement ribs on the surface of each container. (author)

  13. "Keisri hull" kui müstiline fantasy / Siimon Prii

    Index Scriptorium Estoniae

    Prii, Siimon

    2006-01-01

    30. sept. Ugalas esietendunud Jaan Krossi "Keisri hull" (autoridramatiseering), lavastajad Jaak Allik ja Peeter Tammearu. Kunstnik on Jaanus Laagriküll ja muusikaline kujundaja Peeter Konovalov. Peaosas Peeter Tammearu

  14. Hull shape optimization for autonomous underwater vehicles using CFD

    Directory of Open Access Journals (Sweden)

    Ting Gao

    2016-01-01

    Full Text Available Drag estimation and shape optimization of autonomous underwater vehicle (AUV hulls are critical to energy utilization and endurance improvement. In the present work, a shape optimization platform composed of several commercial software packages is presented. Computational accuracy, efficiency and robustness were carefully considered and balanced. Comparisons between experiments and computational fluid dynamics (CFD were conducted to prove that a two-dimensional (2D unstructured mesh, a standard wall function and adaptive mesh refinement could greatly improve efficiency as well as guarantee accuracy. Details of the optimization platform were then introduced. A comparison of optimizers indicates that the multi-island genetic algorithm (MIGA obtains a better hull shape than particle swarm optimization (PSO, despite being a little more time consuming. The optimized hull shape under general volume requirement could provide reference for AUV hull design. Specific requirements based on optimization testify of the platform’s robustness.

  15. Topology Model of the Flow around a Submarine Hull Form

    Science.gov (United States)

    2015-12-01

    resistance and flow noise arising from flow-structure interaction, it is necessary to test the shape of the submarine , which includes the length-to...UNCLASSIFIED Topology Model of the Flow around a Submarine Hull Form S.-K. Lee Maritime Division Defence Science and Technology Group DST-Group–TR...3177 ABSTRACT A topology model constructed from surface-streamer visualisation describes the flow around a generic conventional submarine hull form at

  16. Hull-form optimization of KSUEZMAX to enhance resistance performance

    Directory of Open Access Journals (Sweden)

    Jong-Heon Park

    2015-01-01

    Full Text Available This paper deploys optimization techniques to obtain the optimum hull form of KSUEZMAX at the conditions of full-load draft and design speed. The processes have been carried out using a RaPID-HOP program. The bow and the stern hull-forms are optimized separately without altering neither, and the resulting versions of the two are then combined. Objective functions are the minimum values of wave-making and viscous pressure resistance coefficients for the bow and stern. Parametric modification functions for the bow hull-form variation are SAC shape, section shape (U-Vtype, DLWL type, bulb shape (bulb height and size; and those for the stern are SAC and section shape (U-Vtype, DLWL type. WAVIS version 1.3 code is usedfor the potential and the viscous-flow solver. Prior to the optimization, a parametric study has been conducted to observe the effects of design parameters on the objective functions. SQP has been applied for the optimization algorithm. The model tests have been conducted at a towing tank to evaluate the resistance performance of the optimized hull-form. It has been noted that the optimized hull-form brings 2.4% and 6.8% reduction in total and residual resistance coefficients compared to those of the original hull-form. The propulsive efficiency increases by 2.0% and the delivered power is reduced 3.7%, whereas the propeller rotating speed increases slightly by 0.41 rpm.

  17. Evaluation of the biological activity of sunflower hull extracts

    Energy Technology Data Exchange (ETDEWEB)

    Taha, F. S.; Wagdy, S. M.; Hassanein, M. M. M.; Hamed, S. F.

    2012-11-01

    This work was planned with the aim of adding value to sunflower seed hulls, a waste product of the oil industry by preparing a sunflower hull phenolic extract rich in chlorogenic acid (CGA). In order to fulfill this goal, the optimization for the extraction of a phenolic extract from the hulls was investigated. The parameters studied were: type of solvent, solvent to water ratio and hull to solvent ratio. In addition, the solvent mixtures were also studied. The resulting phenolic extracts were evaluated for their biological activities. This included phenolic content determination, evaluation of the antioxidant and antimicrobial activities. Chlorogenic acid was determined in two chosen hull extracts using the UV spectrophotometric method and HPLC analysis. The anti carcinogenic activity of the two chosen extracts was tested on seven different cell line carcinomas. The results revealed that all the phenolic extracts of sunflower hull studied contain between 190-312.5 mg phenolics/ 100 g hulls. The highest phenolic extraction was achieved with 80% methanol (1:30, hull to solvent, w/v ratio) and methanol to ethanol to water (7:7:6 v/v/v) mixture with values of 312.5 and 306.5 mg phenolics/100 g hulls, respectively. The free radical scavenging activity and antioxidant activity of all the samples ranged from 33.6-72.6%. The highest antioxidant activity and free radical scavenging activity were achieved by the same extracts that possessed the highest phenolic content, namely methanol to ethanol to water extract and 80% methanol with values 71.8 and 72.6%, 68.2 and 70.9% respectively, compared to 77.9 and 76.9% respectively for TBHQ. All the phenolic extracts possessed antimicrobial activity but to different levels against different pathogenic bacteria. The two chosen extracts also possessed anti carcinogenic activity, which differed among varying cell line carcinomas. The HPLC analysis indicated that chlorogenic acid was the main phenolic acid in the extract. Thus it can

  18. Flip to Regular Triangulation and Convex Hull.

    Science.gov (United States)

    Gao, Mingcen; Cao, Thanh-Tung; Tan, Tiow-Seng

    2017-02-01

    Flip is a simple and local operation to transform one triangulation to another. It makes changes only to some neighboring simplices, without considering any attribute or configuration global in nature to the triangulation. Thanks to this characteristic, several flips can be independently applied to different small, non-overlapping regions of one triangulation. Such operation is favored when designing algorithms for data-parallel, massively multithreaded hardware, such as the GPU. However, most existing flip algorithms are designed to be executed sequentially, and usually need some restrictions on the execution order of flips, making them hard to be adapted to parallel computation. In this paper, we present an in depth study of flip algorithms in low dimensions, with the emphasis on the flexibility of their execution order. In particular, we propose a series of provably correct flip algorithms for regular triangulation and convex hull in 2D and 3D, with implementations for both CPUs and GPUs. Our experiment shows that our GPU implementation for constructing these structures from a given point set achieves up to two orders of magnitude of speedup over other popular single-threaded CPU implementation of existing algorithms.

  19. Microwave-Assisted Alkali Pre-Treatment, Densification and Enzymatic Saccharification of Canola Straw and Oat Hull.

    Science.gov (United States)

    Agu, Obiora S; Tabil, Lope G; Dumonceaux, Tim

    2017-03-26

    The effects of microwave-assisted alkali pre-treatment on pellets' characteristics and enzymatic saccharification for bioethanol production using lignocellulosic biomass of canola straw and oat hull were investigated. The ground canola straw and oat hull were immersed in distilled water, sodium hydroxide and potassium hydroxide solutions at two concentrations (0.75% and 1.5% w/v) and exposed to microwave radiation at power level 713 W and three residence times (6, 12 and 18 min). Bulk and particle densities of ground biomass samples were determined. Alkaline-microwave pre-treated and untreated samples were subjected to single pelleting test in an Instron universal machine, pre-set to a load of 4000 N. The measured parameters, pellet density, tensile strength and dimensional stability were evaluated and the results showed that the microwave-assisted alkali pre-treated pellets had a significantly higher density and tensile strength compared to samples that were untreated or pre-treated by microwave alone. The chemical composition analysis showed that microwave-assisted alkali pre-treatment was able to disrupt and break down the lignocellulosic structure of the samples, creating an area of cellulose accessible to cellulase reactivity. The best enzymatic saccharification results gave a high glucose yield of 110.05 mg/g dry sample for canola straw ground in a 1.6 mm screen hammer mill and pre-treated with 1.5% NaOH for 18 min, and a 99.10 mg/g dry sample for oat hull ground in a 1.6 mm screen hammer mill and pre-treated with 0.75% NaOH for 18 min microwave-assisted alkali pre-treatments. The effects of pre-treatment results were supported by SEM analysis. Overall, it was found that microwave-assisted alkali pre-treatment of canola straw and oat hull at a short residence time enhanced glucose yield.

  20. Hull loss accident model for narrow body commercial aircraft

    Directory of Open Access Journals (Sweden)

    Somchanok Tiabtiamrat

    2010-10-01

    Full Text Available Accidents with narrow body aircraft were statistically evaluated covering six families of commercial aircraft includingBoeing B737, Airbus A320, McDonnell Douglas MD80, Tupolev TU134/TU154 and Antonov AN124. A risk indicator for eachflight phase was developed based on motion characteristics, duration time, and the presence of adverse weather conditions.The estimated risk levels based on these risk indicators then developed from the risk indicator. Regression analysis indicatedvery good agreement between the estimated risk level and the accident ratio of hull loss cases per number of delivered aircraft.The effect of time on the hull loss accident ratio per delivered aircraft was assessed for B737, A320 and MD80. Equationsrepresenting the effect of time on hull loss accident ratio per delivered aircraft were proposed for B737, A320, and MD80,while average values of hull loss accident ratio per delivered aircraft were found for TU134, TU154, and AN 124. Accidentprobability equations were then developed for each family of aircraft that the probability of an aircraft in a hull loss accidentcould be estimated for any aircraft family, flight phase, presence of adverse weather factor, hour of day, day of week, monthof year, pilot age, and pilot flight hour experience. A simplified relationship between estimated hull loss accident probabilityand unsafe acts by human was proposed. Numerical investigation of the relationship between unsafe acts by human andfatality ratio suggested that the fatality ratio in hull loss accident was dominated primarily by the flight phase media.

  1. [Cocoa (Theobroma cacao L.) hulls: a posible commercial source of pectins].

    Science.gov (United States)

    Barazarte, Humberto; Sangronis, Elba; Unai, Emaldi

    2008-03-01

    Commercial exploitation of cocoa (Theobroma cacao L.) generates a volume of hulls that could be used in the production of pectins on an industrial scale. Therefore, pectins from cocoa hulls were extracted at different pH and temperature conditions, and their main chemical characteristics were evaluated. EDTA at 0.5% was used for the extraction at pHs 3, 4 and 5 and temperatures of 60, 75 and 90 degrees C, under a 3 2 factorial design. The response variables were yield, content of anhydrous galacturonic acid (AGA), content of metoxil, degree of esterification and equivalent weight of the pectins extracted. The strength of the pectic gel was determined with a TA-XT2 texturometer. Strawberry jam was made with the pectin extracted, and its acceptability was determined using a 7-point hedonic scale. The results obtained were as follows: an extraction yield from 2.64 to 4.69 g/100 g; an AGA content between 49.8 and 64.06 g/100 g; a content of metoxil between 4.72 and 7.18 g/100 g; a degree of esterification between 37.94 and 52.20%; an equivalent weight from 385.47 to 464.61 g/equivalent of H+, and a degree of gelation between 28.64 and 806.03 g force. The pectin extracted at pH 4 and 90 degrees C showed a gelation power of 422.16 g force, purity 62.26 g/100 g of AGA, and a yield of extraction of 3.89 g/100 g and allowed to prepare ajam with an average level of liking of "like moderately". Pectins from cocoa hulls show potential application in the food industry, but it is necessary to optimize the extraction parameters to increase its yield.

  2. Growth of Salmonella Enteritidis phage type 30 in almond hull and shell slurries and survival in drying almond hulls.

    Science.gov (United States)

    Uesugi, Aaron R; Harris, Linda J

    2006-04-01

    Traceback investigation of a 2000 to 2001 outbreak of salmonellosis associated with consumption of raw almonds led to isolation of the outbreak strain Salmonella enterica serovar Enteritidis phage type (PT) 30 on three geographically linked almond farms. Interviews with these growers revealed that significant rain fell during the 2000 harvest when many almonds were drying on the ground. The objectives of this study were to document weather conditions during the 2000 harvest, determine the potential for growth of Salmonella Enteritidis PT 30 in hull or shell slurries, and evaluate survival of Salmonella Enteritidis PT 30 on wet almond hulls during drying. Dry almond hulls and in-shell kernels wetted for 24 h increased in weight by 250 to 300% and 100%, respectively. Both hull and shell slurries supported rapid growth of Salmonella Enteritidis PT 30 at 24 degrees C; slurries containing hulls also supported growth at 15 degrees C. Maximum Salmonella Enteritidis PT 30 concentrations of 6.2 and 7.8 log CFU/ml were observed at 15 and 24 degrees C, respectively. Salmonella Enteritidis PT 30 grown in wet hulls that were incubated at 24 degrees C survived drying at either 15 or 37 degrees C. Reductions of 1 to 3 log CFU/g of dry hull were observed during drying; reductions generally declined as incubation time increased from 2 to 7 days. Evaluation of shipping records revealed that approximately 60% of outbreak-associated almonds had not been exposed to rain, eliminating this factor as the sole cause of the outbreak. However, the data provide evidence that wet almonds may be a greater risk for high concentrations of Salmonella, and specific guidelines should be established for harvesting and processing almonds that have been exposed to rain or other water sources.

  3. Region-of-interest volumetric visual hull refinement

    KAUST Repository

    Knoblauch, Daniel

    2010-01-01

    This paper introduces a region-of-interest visual hull refinement technique, based on flexible voxel grids for volumetric visual hull reconstructions. Region-of-interest refinement is based on a multipass process, beginning with a focussed visual hull reconstruction, resulting in a first 3D approximation of the target, followed by a region-of-interest estimation, tasked with identifying features of interest, which in turn are used to locally refine the voxel grid and extract a higher-resolution surface representation for those regions. This approach is illustrated for the reconstruction of avatars for use in tele-immersion environments, where head and hand regions are of higher interest. To allow reproducability and direct comparison a publicly available data set for human visual hull reconstruction is used. This paper shows that region-of-interest reconstruction of the target is faster and visually comparable to higher resolution focused visual hull reconstructions. This approach reduces the amount of data generated through the reconstruction, allowing faster post processing, as rendering or networking of the surface voxels. Reconstruction speeds support smooth interactions between the avatar and the virtual environment, while the improved resolution of its facial region and hands creates a higher-degree of immersion and potentially impacts the perception of body language, facial expressions and eye-to-eye contact. Copyright © 2010 by the Association for Computing Machinery, Inc.

  4. Numerical Simulation of Galvanic Corrosion Caused by Shaft Grounding Systems in Steel Ship Hulls

    National Research Council Canada - National Science Library

    Wang, Y

    2005-01-01

    .... This led to the accelerated corrosion of the exposed steel ship hull on paint holidays because of the substantial difference of the electric potentials between the steel ship hull and the nickel...

  5. ISOLATION AND CHARACTERIZATION OF NANOFIBRILLATED CELLULOSE FROM OAT HULLS

    Directory of Open Access Journals (Sweden)

    Giovanni B. Paschoal

    2015-05-01

    Full Text Available The objectives of this work were to investigate the microstructure, crystallinity and thermal stability of nanofibrillated cellulose obtained from oat hulls using bleaching and acid hydrolysis at a mild temperature (45 ºC followed by ultrasonication. The oat hulls were bleached with peracetic acid, and after bleaching, the compact structure around the cellulosic fibers was removed, and the bundles became individualized. The extraction time (30 or 60 min did not affect the properties of the nanofibrillated cellulose, which presented a higher crystallinity index and thermal stability than the raw material (oat hulls. The nanocellulose formed interconnected webs of tiny fibers with diameters of 70-100 nm and lengths of several micrometers, producing nanofibers with a relatively high aspect ratio, thus indicating that these materials are suitable for polymer reinforcement.

  6. On Rational Design of Double Hull Tanker Structures against Collision

    DEFF Research Database (Denmark)

    Paik, Jeom Kee; Chung, Jang Young; Choe, Ich Hung

    1999-01-01

    This paper is a summary of recent research and development in areas related to the design technology for double hull tanker structures against low energy collision, jointly undertaken by the Hyundai Heavy Industries, the American Bureau of Shipping, the Technical University of Denmark and the Pusan...... National University. The goal of the study has been to establish a rational practical design oriented approach to collision resistance that is more sophisticated than previous theoretically based procedures and less complicated than conventional nonlinear finite element methods. The main tasks undertaken...... investigation of the energy absorption capability characteristics of a collided double hull VLCC side structure in collision, and (vi) development of a new modified Minorsky method for double hull tanker side structures. The tools developed and the results and insights obtained by the present study should...

  7. On the global ship hull bending energy in ship collisions

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Li, Yujie

    2009-01-01

    During ship collisions part of the kinetic energy of the involved vessels immediately prior to contact is absorbed as energy dissipated by crushing of the hull structures, by friction and by elastic energy. The purpose of this report is to present an estimate of the elastic energy that can...... be stored in elastic hull vibrations during a ship collision. When a ship side is strengthened in order to improve the crashworthiness it has been argued in the scientific literature that a non-trivial part of the energy released for structural deformation during the collision can be absorbed as elastic...... energy in global ship hull vibrations, such that with strong ship sides less energy has to be spent in crushing of the striking ship bow and/or the struck ship side. In normal ship–ship collision analyses both the striking and struck ship are usually considered as rigid bodies where structural crushing...

  8. Characterization Of Cladding Hull Wastes From Used Nuclear Fuels

    Directory of Open Access Journals (Sweden)

    Kang K.H.

    2015-06-01

    Full Text Available Used cladding hulls from pressurized water reactor (PWR are characterized to provide useful information for the treatment and disposal of cladding hull wastes. The radioactivity and the mass of gamma emitting nuclides increases with an increase in the fuel burn-up and their removal ratios are found to be more than 99 wt.% except Co-60 and Cs-137. In the result of measuring the concentrations of U and Pu included in the cladding hull wastes, most of the residues are remained on the surface and the removal ratio of U and Pu are revealed to be over 99.98 wt.% for the fuel burn-up of 35,000 MWd/tU. An electron probe micro-analyzer (EPMA line scanning shows that radioactive fission products are penetrated into the Zr oxide layer, which is proportional to the fuel burn-up. The oxidative decladding process exhibits more efficient removal ratio of radionuclides.

  9. Isolation and chemical analyses of nonfermented fiber fractions of oat hulls and cottonseed hulls.

    Science.gov (United States)

    Garleb, K A; Bourquin, L D; Hsu, J T; Wagner, G W; Schmidt, S J; Fahey, G C

    1991-03-01

    The purpose of this study was to isolate, using both in situ and in vivo methodology, the nonfermented fiber fraction of oat hulls (OH) and cottonseed hulls (CSH) and to compare the concentrations of alkali-labile phenolic monomers, nitrobenzene oxidizable phenolic monomers, and neutral monosaccharides, as well as the cross polarization/magic angle spinning (CP/MAS) carbon-13 (13C) nuclear magnetic resonance (NMR) spectra, of the nonfermented fraction with the original OH or CSH. The in situ isolation procedure involved a 30-h ruminal pretreatment and an 8-h acid:pepsin pretreatment followed by 1 to 7 additional days of incubation in the rumen. Fractions not fermented in vivo were isolated from duodena, ileal, and fecal material obtained from a site and extent of digestion trial in which these byproducts were fed to sheep at 80% of the diet (as-fed basis) and they represented the sole source of dietary fiber. Based on nonfermented fraction composition, both in situ and in vivo, all components analyzed were degraded to some extent. Also, all components present in original byproduct material were present in both the in situ and in vivo nonfermented fractions. Based on NMR analysis, cellulose crystallinity did not change during either long-term in situ or in vivo fermentation. However, CSH cellulose was more crystalline than that of OH. The ADL content of OH and CSH was 6.1% and 19.4%, respectively, and very little (15%) of the ADL disappeared during either in situ or in vivo fermentation. Much of the p-coumaric and ferulic acid of OH, associated with the cell wall matrix as lignin-carbohydrate and phenolic-carbohydrate complexes, was recovered in the fermented fractions. Data are interpreted to indicate that lignin encrustation and cellulose crystallinity are factors affecting CSH fermentation. Lignin encrustation and the presence of lignin-carbohydrate/phenolic-carbohydrate complexes are factors that inhibit OH fermentation.

  10. A Sensor System for Detection of Hull Surface Defects

    Directory of Open Access Journals (Sweden)

    Juan Suardíaz

    2010-07-01

    Full Text Available This paper presents a sensor system for detecting defects in ship hull surfaces. The sensor was developed to enable a robotic system to perform grit blasting operations on ship hulls. To achieve this, the proposed sensor system captures images with the help of a camera and processes them in real time using a new defect detection method based on thresholding techniques. What makes this method different is its efficiency in the automatic detection of defects from images recorded in variable lighting conditions. The sensor system was tested under real conditions at a Spanish shipyard, with excellent results.

  11. Modeling of steady motion and vertical-plane dynamics of a tunnel hull

    Directory of Open Access Journals (Sweden)

    Christopher S. Chaney

    2014-06-01

    Full Text Available High-speed marine vehicles can take advantage of aerodynamically supported platforms or air wings to increase maximum speed or transportation efficiency. However, this also results in increased complexity of boat dynamics, especially in the presence of waves and wind gusts. In this study, a mathematical model based on the fully unsteady aerodynamic extreme-ground-effect theory and the hydrodynamic added-mass strip theory is applied for simulating vertical-plane motions of a tunnel hull in a disturbed environment, as well as determining its steady states in calm conditions. Calculated responses of the boat to wind gusts and surface waves are demonstrated. The present model can be used as a supplementary method for preliminary estimations of performance of aerodynamically assisted marine craft.

  12. Modeling of steady motion and vertical-plane dynamics of a tunnel hull

    Science.gov (United States)

    Chaney, Christopher S.; Matveev, Konstantin I.

    2014-06-01

    High-speed marine vehicles can take advantage of aerodynamically supported platforms or air wings to increase maximum speed or transportation efficiency. However, this also results in increased complexity of boat dynamics, especially in the presence of waves and wind gusts. In this study, a mathematical model based on the fully unsteady aerodynamic extreme-ground-effect theory and the hydrodynamic added-mass strip theory is applied for simulating vertical-plane motions of a tunnel hull in a disturbed environment, as well as determining its steady states in calm conditions. Calculated responses of the boat to wind gusts and surface waves are demonstrated. The present model can be used as a supplementary method for preliminary estimations of performance of aerodynamically assisted marine craft.

  13. 46 CFR 176.650 - Alternative Hull Examination Program options: Divers or underwater ROV.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Alternative Hull Examination Program options: Divers or underwater ROV. 176.650 Section 176.650 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 176.650 Alternative Hull...

  14. 78 FR 50335 - Double Hull Tanker Escorts on the Waters of Prince William Sound, Alaska

    Science.gov (United States)

    2013-08-19

    ... require a two vessel escort system for double hull tankers over 5,000 GT transporting oil in bulk in PWS... 2008 that double hull tankers be escorted by a two vessel escort system when in transit through PWS... SECURITY Coast Guard 33 CFR Part 168 RIN 1625-AB96 Double Hull Tanker Escorts on the Waters of Prince...

  15. 37 CFR 212.5 - Recordation of distinctive identification of vessel hull designer.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Recordation of distinctive identification of vessel hull designer. 212.5 Section 212.5 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE... of distinctive identification of vessel hull designer. (a) General. Any owner of a vessel hull may...

  16. On the use of the Theory of Critical Distances to estimate the dynamic strength of notched 6063-T5 aluminium alloy

    Directory of Open Access Journals (Sweden)

    T. Yin

    2014-10-01

    Full Text Available In this paper the so-called Theory of Critical Distances is reformulated to make it suitable for estimating the strength of notched metals subjected to dynamic loading. The TCD takes as its starting point the assumption that engineering materials’ strength can accurately be predicted by directly post-processing the entire linear-elastic stress field acting on the material in the vicinity of the stress concentrator being assessed. In order to extend the used of the TCD to situations involving dynamic loading, the hypothesis is formed that the required critical distance (which is treated as a material property varies as the loading rate increases. The accuracy and reliability of this novel reformulation of the TCD was checked against a number of experimental results generated by testing notched cylindrical bars of Al6063-T5. This validation exercise allowed us to prove that the TCD (applied in the form of the Point, Line, and Area Method is capable of estimates falling within an error interval of ±20%. This result is very promising especially in light of the fact that such a design method can be used in situations of practical interest without the need for explicitly modelling the non-linear stress vs. strain dynamic behaviour of metals.

  17. Effects of hull form parameters on seakeeping for YTU gulet series with cruiser stern

    Directory of Open Access Journals (Sweden)

    Cakici Ferdi

    2014-09-01

    Full Text Available This study aims to identify the relations between seakeeping characteristics and hull form parameters for YTU Gulet series with cruiser stern. Seakeeping analyses are carried out by means of a computer software which is based on the strip theory and statistical short term response prediction method. Multiple regression analysis is used for numerical assessment through a computer software. RMS heave-pitch motions and absolute vertical accelerations on passenger saloon for Sea State 3 at head waves are investigated for this purpose. It is well known that while ship weight and the ratios of main dimensions are the primary factors on ship motions, other hull form parameters (CP, CWP, CVP, etc. are the secondary factors. In this study, to have an idea of geometric properties on ship motions of gulets three different regression models are developed. The obtained outcomes provide practical predictions of seakeeping behavior of gulets with a high level of accuracy that would be useful during the concept design stage

  18. Effects of hull form parameters on seakeeping for YTU gulet series with cruiser stern

    Directory of Open Access Journals (Sweden)

    Ferdi Cakici

    2014-09-01

    Full Text Available This study aims to identify the relations between seakeeping characteristics and hull form parameters for YTU Gulet series with cruiser stern. Seakeeping analyses are carried out by means of a computer software which is based on the strip theory and statistical short term response prediction method. Multiple regression analysis is used for numerical assessment through a computer software. RMS heave-pitch motions and absolute vertical accelerations on passenger saloon for Sea State 3 at head waves are investigated for this purpose. It is well known that while ship weight and the ratios of main dimensions are the primary factors on ship motions, other hull form parameters (CP, CWP, CVP, etc. are the secondary factors. In this study, to have an idea of geometric properties on ship motions of gulets three different regression models are developed. The obtained outcomes provide practical predictions of seakeeping behavior of gulets with a high level of accuracy that would be useful during the concept design stage.

  19. Effects of implicit theories of ability and stereotype-inconsistent information on handgrip strength in older adults: A regulatory fit perspective.

    Science.gov (United States)

    Emile, Mélanie; Chalabaev, Aina; Colson, Serge S; Vaulerin, Jerome; Falzon, Charlene; D'Arripe-Longueville, Fabienne

    2017-03-01

    This study examined whether stereotype-inconsistent information interacts with implicit theories of ability to affect handgrip strength in older adults. Eighty-two retired older adults (13 men and 69 women) from 61 to 89 years old (M age = 75.8 years; SD = 6.9) performed maximum voluntary contractions (MVC) during a handgrip task in a design manipulating implicit theories of ability and stereotype-inconsistent information related to physical decline with aging. Participants were randomly assigned to one of three groups: incremental condition, entity condition, or control group. The results showed that in the incremental condition the stereotype-inconsistent information improved the peak MVC, the average MVC, the peak rate of force development (RFD), and RFD in the initial 50 ms of the MVC. This study therefore demonstrated that individuals with an incremental mindset who are exposed to stereotype-inconsistent information can boost their physical performance. These findings are discussed from the perspective of regulatory fit (i.e., when task framing is congruent with the individual's goal). © 2016 The Authors. Psychophysiology published by Wiley Periodicals, Inc. on behalf of Society for Psychophysiological Research.

  20. Convex Hull Abstraction in Specialisation of CLP Programs

    DEFF Research Database (Denmark)

    Peralta, J.C.; Gallagher, John Patrick

    2003-01-01

    We introduce an abstract domain consisting of atomic formulas constrained by linear arithmetic constraints (or convex hulls). This domain is used in an algorithm for specialization of constraint logic programs. The algorithm incorporates in a single phase both top-down goal directed propagation a...

  1. Chemical composition of hulled, dehulled and naked oat grains ...

    African Journals Online (AJOL)

    In grain samples of hulled (5 samples), dehulled (5 samples) and naked (4 samples) oats, the following components were determined: chemical composition (ash, crude protein, crude fat, crude fibre and its components) and amino acids and fatty acid composition. The grain of naked and dehulled oats contained ...

  2. On the epireflective hull of topological nearness groups in the ...

    African Journals Online (AJOL)

    To find the specific nature of the objects that are in the epireflective hull of the symmetric topological spaces in the category of nearness spaces is a long open problem. See [BCH05]for more information. Here we consider topological nearness groups as a full subcategory of nearness groups and ask the analogous question ...

  3. 46 CFR 282.23 - Hull and machinery insurance.

    Science.gov (United States)

    2010-10-01

    ... OPERATORS OPERATING-DIFFERENTIAL SUBSIDY FOR LINER VESSELS ENGAGED IN ESSENTIAL SERVICES IN THE FOREIGN COMMERCE OF THE UNITED STATES Calculation of Subsidy Rates § 282.23 Hull and machinery insurance. (a... differential. Port risk premiums are eligible for subsidy but not for determining the U.S.-foreign cost...

  4. "Keisri hull" pürib taas filmiks

    Index Scriptorium Estoniae

    2008-01-01

    Eesti Filmi Sihtasutus otsustas anda arendustoetust mängufilmidele "Keisri hull" (režissöör Peeter Simm, arendaja Lege Artis Film), "Rahad ette" (režissöör Jaak Kilmi, arendaja Eetriüksus), "Öölendurid" (režissöör Peeter Urbla, arendaja Exitfilm)

  5. Op hulle stukke. Jeanette Ferreira, samesteller. Kaapstad: Human ...

    African Journals Online (AJOL)

    wat deur die Russe vir oorlogsdoeleindes opgelei is te deprogrammeer sodat hulle weer vrygelaat kan word. Daar kom egter 'n kin- kel in die kabel wanneer Edelweiss, die afrig- ter van die oorlogsdolfyne, uitvind wat die opdrag van Anton is. Hy verdwyn met die vier beste dolfyne. Daarna begin 'n soektog oor die lengte en ...

  6. Opvoeders se persepsies van hulle werkmotivering: 'n kwalitatiewe ...

    African Journals Online (AJOL)

    Erna Kinsey

    205. Opvoeders se persepsies van hulle werkmotivering: 'n kwalitatiewe studie. N.E.J. Wevers en G.M. Steyn. Fakulteit Opvoedkunde, Universiteit van Suid- Afrika, Posbus 392, Unisa, 0003 Suid-Afrika newevers@webonline.co.za; steyngm1@unisa.ac.za. Teachers' perception of their work motivation: a qualitative study.

  7. Solving Wave Flow Energy Propagated by Twin-Hull Ships (Catamarans)

    Science.gov (United States)

    Salim Kamil, Md; Muslim, Mazlan; Ali, Ishak

    2017-04-01

    The main objective of this paper is to put forward a method of solution of wave flow energy propagated by twin-hull ships utilizing ship wave resistance integral equation by Tuck-Lazauskas [8]. The underlying principle of the governing equation is based on the linear thin ship theory pioneered by Michell. The ship wave resistance integral equation by Tuck-Lazauskas is improvised in which the upper limit of the mathematical integration of the governing equation is set to the final root instead of π/2 as in the original equation to eliminate the problem of solving such a divergent improper integral. The method of solution and the theoretical results are validated against works of others experimentally and theoretically. The results obtained by the proposed method are found to be very consistent and more closely fit to the experimental results in comparison with those obtained by other theoretical method as presented in this paper.

  8. Onboard monitoring of fatigue damage rates in the hull girder

    DEFF Research Database (Denmark)

    Nielsen, Ulrik Dam; Jensen, Jørgen Juncher; Pedersen, Preben Terndrup

    2011-01-01

    Most new advanced ships have extensive data collection systems to be used for continuous monitoring of engine and hull performance, for voyage performance evaluation etc. Such systems could be expanded to include also procedures for stress monitoring and for decision support, where the most...... critical wave-induced ship extreme responses and fatigue damage accumulation can be estimated for hypothetical changes in ship course and speed in the automatically estimated wave environment.The aim of this paper is to outline a calculation procedure for fatigue damage rate prediction in hull girders......-induced stress ranges in a container ship, where the associated fatigue damage rates calculated from a combination of the rain-flow counting method and the Palmgren-Miner damage rule are compared with damage predictions obtained from a computationally much faster frequency fatigue analysis using a spectral...

  9. Conversion of rice hull ash into soluble sodium silicate

    OpenAIRE

    Edson Luiz Foletto; Ederson Gratieri; Leonardo Hadlich de Oliveira; Sérgio Luiz Jahn

    2006-01-01

    Sodium silicate is used as raw material for several purposes: silica gel production, preparation of catalysts, inks, load for medicines, concrete hardening accelerator, component of detergents and soaps, refractory constituent and deflocculant in clay slurries. In this work sodium silicate was produced by reacting rice hull ash (RHA) and aqueous sodium hydroxide, in open and closed reaction systems. The studied process variables were time, temperature of reaction and composition of the reacti...

  10. Effects of Geometry on the Steady Performance of Planing Hulls

    DEFF Research Database (Denmark)

    Wagner, M. K.; Andersen, Poul

    2003-01-01

    is applied to practical hull forms with chines spray rails and with varying deadrise over the length of the boat. The deadrise variation has a large influence on lift and drag. For a design situation, where the total lift and centre of effort is given, the influence on the total drag is less due to change...... of the trim. Calculated results and experiments for resistance and trim agree well for high velocities. Keywords: planing boat, vortex lattice, spray...

  11. A Convex Hull Formulation for the Design of Optimal Mixtures

    OpenAIRE

    Jonuzaj, S; Adjiman, CS

    2016-01-01

    The design of mixtures plays an important role in improving process and product performance but is challenging because it requires finding the optimal number, identities and compositions of mixture components and using nonlinear property models. To address this, a general modeling framework for mixture design problems is presented. It integrates Generalized Disjunctive Programming (GDP) into Computer-Aided Mixture/blend Design via Hull Reformulation (HR). The design methodology is applied suc...

  12. A Numerical Model for Torsion Analysis of Composite Ship Hulls

    Directory of Open Access Journals (Sweden)

    Ionel Chirica

    2012-01-01

    Full Text Available A new methodology based on a macroelement model proposed for torsional behaviour of the ship hull made of composite material is proposed in this paper. A computer program has been developed for the elastic analysis of linear torsion. The results are compared with the FEM-based licensed soft COSMOS/M results and measurements on the scale simplified model of a container ship, made of composite materials.

  13. Simulation of Propeller – Hull Interaction Using Ranse Solver

    Directory of Open Access Journals (Sweden)

    M.N. Senthil Prakash

    2010-09-01

    Full Text Available This work simulates propeller-hull interaction effects by a novel method namely, coupling a Vortex Lattice Method (VLM with a RANSE solver. The VLM generates the propeller forces based on the inputs of blade geometry, wake at propeller inlet, the required thrust and the propeller revolutions. The propeller forces thus obtained are distributed in the fluid domain at the propeller disk region at specific cells. These cells lie close to the blade coordinates and the forces are assigned to the centroids of cells by means of a user-defined function (UDF. The introduction of the body forces into the fluid domain, emulates the propeller action in the field of flow with consequent influences on the flow kinematics. Therefore the interaction effect between propeller and ship hull is simulated successfully by coupling the two methods. Thereby the kinematical aspects such as effective wake conditions are obtained. The results based on the methodology have been verified by comparison with data from the KCS ship available in recent published literature. The method establishes a successful numerical tank approach in understanding the ship hull-propeller interaction problem.

  14. Ensiling of elephant grass with soybean hulls or rice bran

    Directory of Open Access Journals (Sweden)

    India Joelma Gatass Monteiro

    2016-12-01

    Full Text Available The goal was to evaluate the chemical composition and fermentation pattern of elephant grass (Pennisetum purpureum Schum. cv. Roxo silage with different levels of soybean hulls or rice bran. Two trials were conducted, comprising of a completely randomized design, with four replicates each. Treatments consisted on the addition of 0%, 5%, 10%, and 15% of soybean hulls or rice bran to unwilted green elephant grass forage. Large PVC silos were used adopting a density of 600 kg of green mass m-3. The silos were opened 40 days after ensiling. The results revealed that the inclusion of 10% soybean hulls increased elephant grass forage dry matter (DM content to 31%, but did not alter the water soluble carbohydrate (WSC content or buffering capacity. The resultant silages exhibited good fermentation patterns in terms of pH (less than 3.97 and NH3-N (4.07% total N levels. The inclusion of rice bran increased both DM and WSC content in the forage, improving the fermentation pattern of silages (P < 0.05. This too was verified by a pH lower than 3.92 and a maximum NH3-N of 4.23% of the total N. The inclusion of 10% rice bran to the elephant grass improved the nutritional value of the forage to be ensiled and, hence, of the produced silage.

  15. Antioxidant and antiproteinase effects of buckwheat hull extracts

    Directory of Open Access Journals (Sweden)

    Ernest Šturdík

    2013-03-01

    Full Text Available Buckwheat is known not only due to its appropriate nutritional composition but the content of prophylactic compounds, too. These are responsible for buckwheat beneficial impact on human health. Most of them are concentrated in outer layers of buckwheat grain. The subject of this work was to screen hulls of nine common and one tartary buckwheat cultivar for the content of flavonoids and its antioxidant and antiproteinase effects. The highest content of total flavonoids was determined for tartary buckwheat cultivar Madawaska (0.6% of hulls weight. Among common buckwheat cultivars the best values reached samples Bamby (0.23% and KASHO-2 (0.11%. Antioxidant activity as detected via binding radical ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid and monitoring reducing power was the most effective for samples with highest flavonoid content. Buckwheat hulls effectively inhibited pathophysiological proteases thrombin and urokinase, whereas only little effects were seen to trypsin and elastase. In this testing there were again the best samples with highest flavonoid content. Only tartary buckwheat Madawaska effectively inhibited elastase at tested concentrations. No significant correlation was determined between flavonoid content and measured antioxidant or protease inhibitory action. Obtained results allow us to commend tartary buckwheat cultivar Madawaska as well as common buckwheat cultivars Bamby and KASHO-2 for further experiments.doi:10.5219/272

  16. Two-dimensional modeling of stepped planing hulls with open and pressurized air cavities

    Directory of Open Access Journals (Sweden)

    Konstantin I. Matveev

    2012-06-01

    Full Text Available A method of hydrodynamic discrete sources is applied for two-dimensional modeling of stepped planing surfaces. The water surface deformations, wetted hull lengths, and pressure distribution are calculated at given hull attitude and Froude number. Pressurized air cavities that improve hydrodynamic performance can also be modeled with the current method. Presented results include validation examples, parametric calculations of a single-step hull, effect of trim tabs, and performance of an infinite series of periodic stepped surfaces. It is shown that transverse steps can lead to higher lift-drag ratio, although at reduced lift capability, in comparison with a stepless hull. Performance of a multi-step configuration is sensitive to the wave pattern between hulls, which depends on Froude number and relative hull spacing.

  17. 7 CFR 319.8-9 - Hull fiber and gin trash.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Hull fiber and gin trash. 319.8-9 Section 319.8-9... Importation and Entry of Cotton and Covers § 319.8-9 Hull fiber and gin trash. (a) Entry of hull fiber will be authorized under the same conditions as are applicable to waste under this subpart. (b) Gin trash may be...

  18. Evaluation of the biological activity of sunflower hull extracts

    Directory of Open Access Journals (Sweden)

    Taha, F. S.

    2012-06-01

    Full Text Available This work was planned with the aim of adding value to sunflower seed hulls, a waste product of the oil industry by preparing a sunflower hull phenolic extract rich in chlorogenic acid (CGA. In order to fulfill this goal, the optimization for the extraction of a phenolic extract from the hulls was investigated. The parameters studied were: type of solvent, solvent to water ratio and hull to solvent ratio. In addition, the solvent mixtures were also studied. The resulting phenolic extracts were evaluated for their biological activities. This included phenolic content determination, evaluation of the antioxidant and antimicrobial activities. Chlorogenic acid was determined in two chosen hull extracts using the UV spectrophotometric method and HPLC analysis. The anticarcinogenic activity of the two chosen extracts was tested on seven different cell line carcinomas. The results revealed that all the phenolic extracts of sunflower hull studied contain between 190-312.5 mg phenolics/ 100 g hulls. The highest phenolic extraction was achieved with 80% methanol (1:30, hull to solvent, w/v ratio and methanol to ethanol to water (7:7:6 v/v/v mixture with values of 312.5 and 306.5 mg phenolics/100 g hulls, respectively. The free radical scavenging activity and antioxidant activity of all the samples ranged from 33.6-72.6%. The highest antioxidant activity and free radical scavenging activity were achieved by the same extracts that possessed the highest phenolic content, namely methanol to ethanol to water extract and 80% methanol with values 71.8 and 72.6%, 68.2 and 70.9% respectively, compared to 77.9 and 76.9% respectively for TBHQ. All the phenolic extracts possessed antimicrobial activity but to different levels against different pathogenic bacteria. The two chosen extracts also possessed anticarcinogenic activity, which differed among varying cell line carcinomas. The HPLC analysis indicated that chlorogenic acid was the main phenolic acid in the

  19. Strength of Ship Stiffened Panels under Combined Loading

    DEFF Research Database (Denmark)

    Weicheng, Cui; Wang, Young-jun; Pedersen, Preben Terndrup

    2000-01-01

    of stiffened panels. However, the majority of these investigations deal with stiffened panels subjected to longitudinal compression only. For real ship structural stiffened panels, the most general loading case is the combination of longitudinal stresses, transverse stresses, shear stresses and lateral......A ship's hull is a box girder structure composed of stiffened panels and therefore, strength of stiffened panels plays a significant role for the ultimate strength analysis of ship structures. In recent years several authors have proposed simplified methods to calculate the ultimate strength...... of stiffened panels....

  20. On the Global Ship Hull Bending Energy in Ship Collisions

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup; Li, Y.

    2004-01-01

    to the impact location and where local and global bending vibration modes are neglected. That is, the structural deformation problem is considered quasi-static. In this paper a simple uniform free-free beam model is presented for estimating the energy transported into the global bending vibrations of the struck...... ship hull during ship-ship collisions. The striking ship is still considered as a rigid body. The local interaction between the two ships is modeled by a linear load-deflection relation. The analysis results for a simplified model of a struck coaster and of a large tanker show that the elastic energy...

  1. SHIP HULL FOULING AS A MEANS OF MAKROZOOBENTHOS DISPERSAL

    Directory of Open Access Journals (Sweden)

    Joanna Cupak

    2014-10-01

    Full Text Available Hulls of 9 boats operating in inland waterways and coastal Baltic waters along were examined for the presence of fouling organisms. A total of 23 animal taxa were recorded, 8 of them being alien species known to have been earlier introduced into the Baltic Sea basin. The most frequent taxa were: Amphibalanus improvisus, Chironomidae, Dreissena polymorpha, and Gammarus tigrinus. The fi ndings of this study clearly demonstrate the important role potentially played by small crafts in the introduction and spread of alien species not only in the River Odra estuary, but also in the coastal Baltic waters outside of the Odra plume.

  2. Hulled and hull-less barley cultivars with the genetic trait for low-phytic acid increased the apparent digestibility of phosphorus and calcium in diets for young swine

    Science.gov (United States)

    A 35-d experiment was conducted using 63 crossbred pigs (35 barrows and 28 gilts) with an average initial BW of 7.0 kg and age of 28 d to evaluate the efficacy of the low-phytic acid (LPA) genetic trait in hulled and hull-less barley cultivars. The hulled cultivars were Harrington normal barley (NB)...

  3. High rates of gasified rice hull biochar affect geranium and tomato growth in a soilless substrate

    Science.gov (United States)

    Gasified rice hull biochar (GRHB) is a byproduct of rice production, where rice hulls are gasified to generate energy for other aspects of rice processing. Other research has shown that GRHB up to 10% (v/v) in a soilless substrate can provide much, but not all, of a potted floriculture crops’ phosp...

  4. Gamma radiation effects on phenolics, antioxidants activity and in vitro digestion of pistachio (Pistachia vera) hull

    Energy Technology Data Exchange (ETDEWEB)

    Behgar, M., E-mail: mbehgar@nrcam.org [Agricultural, Medical and Industrial Research School, P.O. Box 31485498, Karaj (Iran, Islamic Republic of); Ghasemi, S.; Naserian, A. [Faculty of Agriculture, Excellence Center in Animal Science, Ferdowsi University of Mashhad, P.O. Box 917751163, Mashhad (Iran, Islamic Republic of); Borzoie, A.; Fatollahi, H. [Agricultural, Medical and Industrial Research School, P.O. Box 31485498, Karaj (Iran, Islamic Republic of)

    2011-09-15

    The effect of gamma radiation (10, 20, 30, 40, 50 and 60 kGy) on tannin, total phenolics, antioxidants activity and in vitro digestion of pistachio hulls has been investigated in this study. The possibility of using the radial diffusion method based on software measurement of the rings area has also been investigated in this study. The software based method in radial diffusion method showed a higher r{sup 2} (0.995) value when compared to the traditional method. Irradiation reduced the tannin content (P<0.01) and activity of antioxidants (P<0.05) of pistachio hull extracts but increased the total phenolic content (P<0.05). There was no effect of gamma irradiation on the in vitro digestion of the pistachio hull. Irradiation decreased the digestion rate of the pistachio hull at the dose of 40 kGy when compared to the control. This study showed that gamma irradiation decreased tannin and antioxidants activity of pistachio hull. - Highlights: > we investigate the effects of gamma irradiation on pistachio hull. > We examine changes in phenolics, antioxidant and digestion of pistachio hull. > Computerized radial diffusion method gives precise regression for standard curve. > Gamma irradiation will decrease tannin and antioxidants of pistachio hull extracts.

  5. Sunflower hulls degradation by co-composting with different nitrogen sources.

    Science.gov (United States)

    Conghos, M M; Aguirre, M E; Santamaría, R M

    2006-09-01

    The decomposition of sunflower hull and its mixtures was examined under mesophilic (M) and thermophilic (T) temperatures during 100 days. Thermophilic conditions were used to define the composting process. Vetch, alfalfa and ammonium nitrate were used as nitrogen co-substrates, in 6 treatments: sunflower hulls alone (C), sunflower hulls plus ammonium nitrate (CN), sunflower hulls plus alfalfa (CA), sunflower hulls plus alfalfa and ammonium nitrate (CAV), sunflower hulls plus vetch (CV), sunflower hulls plus vetch and ammonium nitrate (CVN). Total organic carbon (TOC), oxidizable carbon (OC), dry matter, ashes content, total nitrogen (N), cellulose, hemicellulose, lignin, pH, electrical conductivity and C to N ratio were measured to asses the efficiency of the composting process and to determine the best amendment. Results show that sunflower hulls (Sh) treatment with the organic amendments had a better response than the inorganic ones. This was concluded from the variation in the fiberfractions, the decrease in dry matter and the major decrease in C to N ratio.

  6. 46 CFR 71.50-1 - Definitions relating to hull examinations.

    Science.gov (United States)

    2010-10-01

    .... Remotely operated vehicle (ROV) team, at a minimum, consist of an ROV operator, a non-destructive testing... a combination of underwater surveys, internal examinations, and annual hull condition assessment... examination of all accessible parts of the vessel's underwater body and all through-hull fittings and...

  7. 46 CFR 71.50-25 - Alternative Hull Examination (AHE) procedure.

    Science.gov (United States)

    2010-10-01

    ... and a detailed examination of all hull welds, propellers, tailshafts, rudders, and other hull appurtenances; (2) Examine all sea chests; (3) Remove and inspect all sea valves in the presence of a marine... examined, if required by the Officer in Charge, Marine Inspection (OCMI); (5) Allow access to all internal...

  8. 46 CFR 42.09-30 - Additional survey requirements for steel-hull vessels.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Additional survey requirements for steel-hull vessels...-30 Additional survey requirements for steel-hull vessels. (a) In addition to the requirements in § 42..., peaks, bilges, machinery spaces, and bunkers shall be examined to determine the condition of the framing...

  9. Rice hull smoke extract inactivates Salmonella Typhimurium in laboratory media and protects infected mice against mortality

    Science.gov (United States)

    A recently discovered and characterized rice hull liquid smoke extract was tested for bactericidal activity against Salmonella Typhimurium using the disc-agar method. The Minimum Inhibitory Concentration (MIC) value of rice hull smoke extract was found to be 0.822% (v/v). The in vivo antibacterial a...

  10. Required grades of hull steel plates in consideration of fracture toughness; Hakai jinsei wo koryoshita sentaiyo koban shiyo kubun ni kansuru ichikosatsu

    Energy Technology Data Exchange (ETDEWEB)

    Yajima, H.; Yamamoto, M.; Ogaki, Y. [Hiroshima University, Hiroshima (Japan). Faculty of Engineering

    1997-10-01

    This paper discusses the required grades of hull steel plates based on the steel ship rule of Nippon Kaiji Kyokai (NK). The minimum value of the allowable crack length in NK rule (critical safety crack length at 0degC just before brittle unstable crack causing fatal fracture) was estimated. In the case where the estimated crack tip exists in a matrix, the crack length was a minimum of 200-210mm, while nearly 60mm in a fusion line at high-heat-input welded joint. The allowable crack lengths estimated from a specified value in the NK rule were fairly different. The allowable crack length at 0degC was also estimated from the minimum value in V-notch Charpy impact test. The private proposal on the required grades of hull steel plates in consideration of fracture toughness was discussed. Thirty-five percent of crack lengths found in real ships is 100mm or less, however, cracks of 250-400mm long are frequently found suggesting the allowable crack length of 400mm. The required grade integrally considering required values and design conditions is demanded to secure the reliability of hull strength. 5 refs., 5 figs., 2 tabs.

  11. Strength Training

    Science.gov (United States)

    ... big difference between strength training, powerlifting, and competitive bodybuilding! Strength training uses resistance methods like free weights, ... a person can lift at one time. Competitive bodybuilding involves evaluating muscle definition and symmetry, as well ...

  12. Ultimate Strength of a Ship’s Hull Girder in Plastic and Buckling Modes.

    Science.gov (United States)

    1980-06-01

    drawn for deep - web -frame plate panels, of low slenderness ratio, simple supported and edges kept straight. It should be noted, however, that the range...H.-G., "Notes on the Buckling and Post-buckling Behaviour of Deep Web Frames," J. Marine Tech., July 1972. V. 62 [34] Timoshenko, S., "Stability of

  13. PENGKLASIFIKASIAN DEBITUR DENGAN MENGGUNAKAN ALGORITMA GRAHAM SCAN DALAM PENGAPLIKASIAN CONVEX HULL

    Directory of Open Access Journals (Sweden)

    AGUS EKA ARIESTA

    2014-01-01

    Full Text Available Computational geometry is the mathematical science of computation by using the algorithm analysis to solve the problems of geometry. The problems of computational include polygon triangulations, convex hulls, Voronoi diagrams, and motion planning. Convex hull is the set of points that form a convex polygon that covers the entire set of points. The algorithms for determining the convex hull, among others, Graham Scan, Jarvis March, and Divide and Conquer. In the two-dimensional case, Graham Scan algorithm is highly efficient in the use of time complexity. This article discusses the quest convex hull of the data bank debtors, some of the data used to look at the classification accuracy of the convex hull formed. The coordinates of all the data found by using principal component analysis.After the data are analyzed, we get the accuracy of classification by 74%.

  14. Remote identification of the vibration amplitude of ship hull

    Directory of Open Access Journals (Sweden)

    A. N. Pinchuk

    2014-01-01

    Full Text Available The aim is to develop the methodological support to determine vibration amplitude of the ship hull remotely using a coherent radar centimeter range based on the variation of the Doppler signal spectrum reflected from a vibrating surface.The paper presents a synthesized mathematical model of the radio signal reflected from the vibrating surface. It is the signal of coherent radar of continuous radiation with a known carrier frequency and the amplitude of the radiated signal. In the synthesis it was believed that the displacement in the radial direction with respect to the vibrating surface radar was sinusoidal.The dependences of the vibration amplitude on the value of the normalized Doppler radio signal spectrum at the second harmonic frequency are obtained. Cycle results of field experiments to study the variability of the sea surface, determining the level of its roughness, allows us to establish that the energy of surface waves of gravitational-capillary range has a high correlation with the wind speed. It is proved that the ratio of the spectral density levels at vibration frequency and its multiple frequencies is specified by the index of phase modulation linearly related to the amplitude of vibration of the ship hull.The results are significant for radar (radar detection of water targets using the coherent radar of centimeter range, ensuring the correct records of noise generated by the scattering of radio waves from the water surface.

  15. Measuring hull girder deformations on a 9300 TEU containership

    Science.gov (United States)

    Koning, Jos; Schiere, Marcus

    2014-12-01

    A 9300 TEU container carrier was equipped in 2006 with instrumentation aimed at wave induced accelerations, and motions. In 2010 the system was extended with strain sensors to include structural loads. Section loads for vertical bending could be readily obtained but the originally intended derivation of horizontal bending and torsion from the measured strains was found to be unreliable. This paper addresses an alternative approach that was adopted in the post processing of results. In particular the concept to use acceleration sensors to capture global hull deformations along the length of the hull, and the use of a data fusion procedure to obtain section loads from combined sensor data and finite element calculations. The approach is illustrated by comparison of actually measured accelerations and local strains with values obtained from the data fusion model. It is concluded that the approach is promising but in need of further validation and development. In particular the number and shapes of the modes used may not have been sufficient to represent the true deflection and thus strain distributions along the high loaded areas.

  16. A smart ROV solution for ship hull and harbor inspection

    Science.gov (United States)

    Reed, Scott; Wood, Jon; Vazquez, Jose; Mignotte, Pierre-Yves; Privat, Benjamin

    2010-04-01

    Hull and harbor infrastructure inspections are frequently performed manually and involve quite a bit of risk and human and monetary resources. In any kind of threat and resource constrained environment, this involves unacceptable levels of risk and cost. Modern Remotely Operated Vehicles are highly refined machines that provide features and capabilities previously unavailable. Operations once carried out by divers can now be carried out more quickly, efficiently and safely by smart enabled ROVs. ROVs are rapidly deployable and capable of continuous, reliable operations in adverse conditions. They also provide a stable platform on which multiple sensors may be mounted and utilized to meet the harbor inspection problem. Automated Control software provides ROV's and their pilots with the capability to inspect complex, constrained environments such as those found in a harbor region. This application and the user interface allow the ROV to automatically conduct complex maneuvers relative to the area being inspected and relieves the training requirements and work load for the pilot, allowing he or she to focus on the primary task of survey, inspection and looking for possible threats (such as IEDs, Limpet Mines, signs of sabotage, etc). Real-time sensor processing tools can be integrated into the smart ROV solution to assist the operator. Automatic Target Recognition (ATR) algorithms are used to search through the sensor data collected by the ROV in real time. These algorithms provide immediate feedback on possible threats and notify the operator of regions that may require manual verification. Sensor data (sonar or video) is also mosaiced, providing the operator with real-time situational awareness and a coverage map of the hull or seafloor. Detected objects may also be placed in the context of the large scale characteristics of the hull (or bottom or pilings) and localized. Within the complex areas such as the harbor pier pilings and the running gear of the ship, real

  17. Effect of oat hulls on performance, gut capacity and feed passage time in broiler chickens.

    Science.gov (United States)

    Hetland, H; Svihus, B

    2001-07-01

    1. Two experiments were conducted to study effects of oat hulls and their interaction with soluble fibre in broiler chickens. 2. In experiment 1, wheat or naked oats based diets with or without NSP-degrading enzymes were mixed with 0, 40 or 100 g/kg oat hulls which replaced a maize starch/soy isolate mixture, and the diets were fed to broiler chickens from 7-21 d of age. 3. Production results, AMEn determined between 14 and 16 d of age, and ileal digestibility indicated no negative effect of oat hulls on nutrient digestibility or weight gain. 4. Feed consumption increased significantly when oat hulls were included in the diet and relative gut weight increased correspondingly (Pdigestibility in wheat diets. 6. In experiment 2, mash diets were fed unsupplemented, or were supplemented with coarsely or finely ground oat hulls which replaced a maize starch/soy isolate mixture. 7. Faecal titanium dioxide excreted between 1 and 48 h after feeding of a gelatin capsule containing titanium dioxide, was used to calculate feed passage time. 8. There was a tendency (P=0.08) for faster feed passage with inclusion of coarsely ground oat hulls, but no effect of finely ground oat hulls was found.

  18. Hydrodynamic Characteristics of a Low-drag, Planing-tail Flying-boat Hull

    Science.gov (United States)

    Suydam, Henry B

    1948-01-01

    The hydrodynamic characteristics of a flying-boat incorporating a low-drag, planing-tail hull were determined from model tests made in Langley tank number 2 and compared with tests of the same flying boat incorporating a conventional-type hull. The planing-tail model, with which stable take-offs were possible for a large range of elevator positions at all center-of-gravity locations tested, had more take-off stability than the conventional model. No upper-limit porpoising was encountered by the planing-tail model. The maximum changes in rise during landings were lower for the planing-tail model than for the conventional model at most contact trims, an indication of improved landing stability for the planing-tail model. The hydrodynamic resistance of the planing-tail hull was lower than the conventional hull at all speeds, and the load-resistance ratio was higher for the planing-tail hull, being especially high at the hump. The static trim of the planing-tail hull was much higher than the conventional hull, but the variation of trim with speed during take-off was smaller.

  19. Solid-state fermentation of Mortierella isabellina for lipid production from soybean hull.

    Science.gov (United States)

    Zhang, Jianguo; Hu, Bo

    2012-02-01

    Soybean hull, generated from soybean processing, is a lignocellulosic material with limited industrial applications and little market value. This research is exploring a new application of soybean hull to be converted to fungal lipids for biodiesel production through solid-state fermentation. Mortierella isabellina was selected as the oil producer because of its high lipid content at low C/N ratio. Several cultivation factors were investigated, including moisture content, inoculums size, fungal spore age, and nutrient supplements, in an attempt to enhance the lipid production of the solid-state fermentation process. The results showed that lipid production with the increase of the moisture content and the spore age, while decreased as the size of inoculums increased. Nutrients addition (KH₂PO₄ 1.2 mg and MgSO₄ 0.6 mg/g soybean hull) improved the lipid production. The total final lipid reached 47.9 mg lipid from 1 g soybean hull after the conversion, 3.3-fold higher than initial lipid reserve in the soybean hull. The fatty acid profile analysis indicated that fatty acid content consisted of 30.0% of total lipid, and 80.4% of total fatty acid was C16 and C18. Therefore, lipid production from soybean hull is a possible option to enable soybean hull as a new resource for biodiesel production and to enhance the overall oil production from soybeans.

  20. Intake and digestibility of fatty acids in late-lactating dairy cows fed flaxseed hulls supplemented with monensin.

    Science.gov (United States)

    Côrtes, Cristiano; da Silva-Kazama, Daniele; Kazama, Ricardo; Benchaar, Chaouki; Zeoula, Lucia M; Santos, Geraldo T D; Petit, Hélène V

    2011-11-01

    Flaxseed hull, a co-product obtained from flax processing, is a rich source of n-3 fatty acids but there is little information on digestibility of its nutrients by dairy cows. Four rumen-cannulated multiparous Holstein cows averaging 665 ± 21 kg of body weight and 190 ± 5 d in milk at the beginning of the experiment were assigned to a 4 × 4 Latin square design with four 28-d experimental periods to determine the effects of feeding monensin and flaxseed hulls on total tract apparent digestibility of nutrients and fatty acids. The four treatments were: (1) diet CO: control with neither flaxseed hulls nor monensin added; (2) diet FH containing 19·8 g flaxseed hulls/100 g dry matter (DM); (3) diet MO with 16 mg monensin/kg DM; (4) diet HM containing 19·8 g flaxseed hulls/100 g DM and 16 mg monensin/kg DM. Diets provided similar amounts of protein and net energy of lactation. Digestibility of crude protein was higher for diets containing flaxseed hulls and for diets supplemented with monensin. Flaxseed hulls supplementation decreased digestibility of acid and neutral detergent fibre. Significantly higher digestibility of ether extract and individual fatty acids was observed for treatments with flaxseed hulls compared with treatments without flaxseed hulls. A combination of flaxseed hulls and monensin did not result in better fatty acid digestibility than when feeding only flaxseed hulls.

  1. Classification of Fusarium-Infected Korean Hulled Barley Using Near-Infrared Reflectance Spectroscopy and Partial Least Squares Discriminant Analysis.

    Science.gov (United States)

    Lim, Jongguk; Kim, Giyoung; Mo, Changyeun; Oh, Kyoungmin; Yoo, Hyeonchae; Ham, Hyeonheui; Kim, Moon S

    2017-09-30

    The purpose of this study is to use near-infrared reflectance (NIR) spectroscopy equipment to nondestructively and rapidly discriminate Fusarium -infected hulled barley. Both normal hulled barley and Fusarium -infected hulled barley were scanned by using a NIR spectrometer with a wavelength range of 1175 to 2170 nm. Multiple mathematical pretreatments were applied to the reflectance spectra obtained for Fusarium discrimination and the multivariate analysis method of partial least squares discriminant analysis (PLS-DA) was used for discriminant prediction. The PLS-DA prediction model developed by applying the second-order derivative pretreatment to the reflectance spectra obtained from the side of hulled barley without crease achieved 100% accuracy in discriminating the normal hulled barley and the Fusarium -infected hulled barley. These results demonstrated the feasibility of rapid discrimination of the Fusarium -infected hulled barley by combining multivariate analysis with the NIR spectroscopic technique, which is utilized as a nondestructive detection method.

  2. Conversion of rice hull ash into soluble sodium silicate

    Directory of Open Access Journals (Sweden)

    Edson Luiz Foletto

    2006-09-01

    Full Text Available Sodium silicate is used as raw material for several purposes: silica gel production, preparation of catalysts, inks, load for medicines, concrete hardening accelerator, component of detergents and soaps, refractory constituent and deflocculant in clay slurries. In this work sodium silicate was produced by reacting rice hull ash (RHA and aqueous sodium hydroxide, in open and closed reaction systems. The studied process variables were time, temperature of reaction and composition of the reaction mixture (expressed in terms of molar ratios NaOH/SiO2 and H2O/SiO2. About 90% silica conversion contained in the RHA into sodium silicate was achieved in closed system at 200 °C. The results showed that sodium silicate production from RHA can generate aggregate value to this residue.

  3. INTEGRATION OF SHIP HULL ASSEMBLY SEQUENCE PLANNING, SCHEDULING AND BUDGETING

    Directory of Open Access Journals (Sweden)

    Remigiusz Romuald Iwańkowicz

    2015-02-01

    Full Text Available The specificity of the yard work requires the particularly careful treatment of the issues of scheduling and budgeting in the production planning processes. The article presents the method of analysis of the assembly sequence taking into account the duration of individual activities and the demand for resources. A method of the critical path and resource budgeting were used. Modelling of the assembly was performed using the acyclic graphs. It has been shown that the assembly sequences can have very different feasible budget regions. The proposed model is applied to the assembly processes of large-scale welded structures, including the hulls of ships. The presented computational examples have a simulation character. They show the usefulness of the model and the possibility to use it in a variety of analyses.

  4. Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation

    Directory of Open Access Journals (Sweden)

    Hee-Jong Choi

    2011-12-01

    Full Text Available In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 (CB=0.60 hull and KRISO container ship (KCS, a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI. The computational results were validated by comparing with the existing experimental data.

  5. Effects of symmetrical foundation on sound radiation from a submarine hull structure.

    Science.gov (United States)

    Li, Chenyang; Su, Jinpeng; Wang, Jian; Hua, Hongxing

    2015-11-01

    The effects of a passive noise control method for suppressing sound radiation from a submarine hull structure are investigated. The control method is realized by symmetrizing the foundation about the horizontal plane. The coupled finite element method and boundary element method are adopted to compute the acoustic characteristics of the submerged hull. From the numerical results, the symmetrical foundation has advantages in sound radiation reduction when the hull is subjected to the axial load, but has little influences in the vertical and transverse load cases. Using the modal decomposition technique, the contributions of each individual mode to the sound radiation are analyzed to reveal the mechanism of the control method.

  6. Business Ethics & Other Paradoxes, Jimmy Winfield, George Hull and Greg Fried : review article

    National Research Council Canada - National Science Library

    Flockemann, Richard

    2015-01-01

    Business Ethics & Other Paradoxes by Jimmy Winfield, George Hull and Greg Fried is an attempt to demonstrate how careful philosophical analysis can help us resolve a number of deep ethical questions revolving around...

  7. Gamma radiation effects on phenolics, antioxidants activity and in vitro digestion of pistachio ( Pistachia vera) hull

    Science.gov (United States)

    Behgar, M.; Ghasemi, S.; Naserian, A.; Borzoie, A.; Fatollahi, H.

    2011-09-01

    The effect of gamma radiation (10, 20, 30, 40, 50 and 60 kGy) on tannin, total phenolics, antioxidants activity and in vitro digestion of pistachio hulls has been investigated in this study. The possibility of using the radial diffusion method based on software measurement of the rings area has also been investigated in this study. The software based method in radial diffusion method showed a higher r2 (0.995) value when compared to the traditional method. Irradiation reduced the tannin content ( Pphenolic content ( P<0.05). There was no effect of gamma irradiation on the in vitro digestion of the pistachio hull. Irradiation decreased the digestion rate of the pistachio hull at the dose of 40 kGy when compared to the control. This study showed that gamma irradiation decreased tannin and antioxidants activity of pistachio hull.

  8. Two-photon-absorption line strengths for nitric oxide: Comparison of theory and sub-Doppler, laser-induced fluorescence measurements

    Science.gov (United States)

    Kulatilaka, Waruna D.; Lucht, Robert P.

    2017-03-01

    We discuss the results of high-resolution, sub-Doppler two-photon-absorption laser-induced fluorescence (TPALIF) spectroscopy of nitric oxide at low pressure and room temperature. The measurements were performed using the single-longitudinal mode output of a diode-laser-seeded optical parametric generator (OPG) system with a measured frequency bandwidth of 220 MHz. The measurements were performed using a counter-propagating pump beam geometry, resulting in sub-Doppler TPALIF spectra of NO for various rotational transitions in the (0,0) vibrational band of the A2Σ+ - X2Π electronic transition. The experimental results are compared with the results of a perturbative treatment of the rotational line strengths for the 20 different rotational branches of the X2Π(v″ = 0) → A2Σ+(v' = 0) two-photon absorption band. In the derivation of the expressions for the two-photon transition absorption strength, the closure relation is used for rotational states in the intermediate levels of the two-photon transition in analogy with the Placzek treatment of Raman transitions. The theoretical treatment of the effect of angular momentum coupling on the two-photon rotational line strengths features the use of irreducible spherical tensors and 3j symbols. The final results are expressed in terms of the Hund's case (a) coupling coefficients aJ and bJ for the X2Π(v″ = 0) rotational level wavefunctions, which are intermediate between Hund's case (a) and case (b). Considerable physical insight is provided by this final form of the equations for the rotational line strengths. Corrections to the two-photon absorption rotational line strength for higher order effects such as centrifugal stretching can be included in a straightforward fashion in the analysis by incorporating higher order terms in these coupling coefficients aJ and bJ, although these corrections are essentially negligible for J satellite transitions are in excellent agreement with our experimental measurements.

  9. Die onkunde van die Jode en hulle verwerping van die evangelie

    African Journals Online (AJOL)

    kontras uitgewys tussen die misdaad van die Jode en die doel van God wat in vers 18 uitgedruk word (Metzger ... ens (1978: 28) dat ons ons nie kan vrypleit deur ons te beroep op die verborge raad van God nie - ons ... volk mislei het deur hulle vir hulle eie doel teen Jesus te gebruik. SÓ gesien, kom Lukas 24: 20 tot sy reg, ...

  10. 46 CFR 42.09-35 - Additional survey requirements for wood-hull vessels.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Additional survey requirements for wood-hull vessels. 42.09-35 Section 42.09-35 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LOAD LINES DOMESTIC AND FOREIGN VOYAGES BY SEA Load Line Assignments and Surveys-General Requirements § 42.09-35 Additional survey requirements for wood-hull...

  11. Neural Correlates of Confidence during Item Recognition and Source Memory Retrieval: Evidence for Both Dual-Process and Strength Memory Theories

    Science.gov (United States)

    Hayes, Scott M.; Buchler, Norbou; Stokes, Jared; Kragel, James; Cabeza, Roberto

    2011-01-01

    Although the medial-temporal lobes (MTL), PFC, and parietal cortex are considered primary nodes in the episodic memory network, there is much debate regarding the contributions of MTL, PFC, and parietal subregions to recollection versus familiarity (dual-process theory) and the feasibility of accounts on the basis of a single memory strength…

  12. Analysis of flow over an axisymmetric hull-form using Large Eddy Simulation

    Science.gov (United States)

    Kumar, Praveen; Mahesh, Krishnan

    2017-11-01

    Large eddy simulations are performed for flow over an idealized axisymmetric hull at a Reynolds number of 1.1 million, based on hull length and freestream velocity. The domain is chosen to minimize confinement effects and the grid is designed to capture the near-wall physics as well as the evolution of turbulent wake. The entire hull is broken up into bow, mid and stern region and analyzed individually before merging them together, to ensure accurate solution on the final grid. The boundary layer is tripped on the bow region of the hull to make it turbulent as done in experiment. The turbulent boundary layer evolves on the mid region of the hull and eventually separates on the stern region due to the adverse pressure gradient, and forms the wake. Results are shown for the flow field and the pressure and skin-friction on the hull. The sensitivity of wake to the boundary layer characteristics on the stern is discussed. This work is supported by the Office of Naval Research.

  13. Extreme-value statistics from Lagrangian convex hull analysis I. Validation for homogeneous turbulent Boussinesq convection and MHD convection

    CERN Document Server

    Pratt, J; Müller, W -C; Chapman, S C; Watkins, N W

    2016-01-01

    We investigate the utility of the convex hull to analyze physical questions related to the dispersion of a group of much more than four Lagrangian tracer particles in a turbulent flow. Validation of standard dispersion behaviors is a necessary preliminary step for use of the convex hull to describe turbulent flows. In simulations of statistically homogeneous and stationary Navier-Stokes turbulence, neutral fluid Boussinesq convection, and MHD Boussinesq convection we show that the convex hull can be used to reasonably capture the dispersive behavior of a large group of tracer particles. We validate dispersion results produced with convex hull analysis against scalings for Lagrangian particle pair dispersion. In addition to this basic validation study, we show that convex hull analysis provides information that particle pair dispersion does not, in the form of a extreme value statistics, surface area, and volume for a cluster of particles. We use the convex hull surface area and volume to examine the degree of...

  14. Nonparametric illumination correction for scanned document images via convex hulls.

    Science.gov (United States)

    Meng, Gaofeng; Xiang, Shiming; Zheng, Nanning; Pan, Chunhong

    2013-07-01

    A scanned image of an opened book page often suffers from various scanning artifacts known as scanning shading and dark borders noises. These artifacts will degrade the qualities of the scanned images and cause many problems to the subsequent process of document image analysis. In this paper, we propose an effective method to rectify these scanning artifacts. Our method comes from two observations: that the shading surface of most scanned book pages is quasi-concave and that the document contents are usually printed on a sheet of plain and bright paper. Based on these observations, a shading image can be accurately extracted via convex hulls-based image reconstruction. The proposed method proves to be surprisingly effective for image shading correction and dark borders removal. It can restore a desired shading-free image and meanwhile yield an illumination surface of high quality. More importantly, the proposed method is nonparametric and thus does not involve any user interactions or parameter fine-tuning. This would make it very appealing to nonexpert users in applications. Extensive experiments based on synthetic and real-scanned document images demonstrate the efficiency of the proposed method.

  15. Hydrolysis of sweet blue lupin hull using subcritical water technology.

    Science.gov (United States)

    Ciftci, Deniz; Saldaña, Marleny D A

    2015-10-01

    Hydrolysis of sweet blue lupin hulls was conducted in this study using subcritical water technology. Effects of process parameters, such as pressure (50-200 bar), temperature (160-220°C), flow rate (2-10 mL/min), and pH (2-12), were studied to optimize maximum hemicellulose sugars recovery in the extracts. Extracts were analyzed for total hemicellulose sugars, phenolics and organic carbon contents and solid residues left after treatments were also characterized. Temperature, flow rate, and pH had a significant effect on hemicellulose sugar removal; however, the effect of pressure was not significant. The highest yield of hemicellulose sugars in the extracts (85.5%) was found at 180°C, 50 bar, 5 mL/min and pH 6.2. The thermal stability of the solid residue obtained at optimum conditions improved after treatment and the crystallinity index increased from 11.5% to 58.6%. The results suggest that subcritical water treatment is a promising technology for hemicellulose sugars removal from biomass. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Evaluation of peanut hulls as an alternative to bleaching clays

    Energy Technology Data Exchange (ETDEWEB)

    Hassanein, M. M.; El-Shami, S. M.; Taha, F. S.

    2011-07-01

    Peanut hulls (PNH) were carbonized at different temperatures, times, and evaluated at different concentrations as an alternative to bleaching clays. Evaluation of bleached crude soybean oil with PNH was based on their delta free fatty acids, reduction in peroxide value (PV), reduction in phospholipids (PL) and bleachability. The performance of several commercially used bleaching clays was evaluated, for comparison. Mixtures were formulated including: PNH and Tonsil -N (TN), PNH and Fuller's earth (FE) and PNH and O-passive (OP) and examined. The oxidative stability of oils was determined. Results for the investigated commercial bleaching clays revealed: TN > FE > F > TF > OP. Highest reduction in PV and PL, and highest bleachability were achieved for soybean oil bleached with 2% PNH carbonized at 500 degree centigrade for 30 min (PNH). Mixtures of PNH with the three chosen bleaching clays indicated that 1PNH : 2TN gave the highest bleachability. CSO was miscella bleached in hexane using PNH and resulted in an appreciable improvement in all oil characteristics, especially in bleachability. Oxidative stability of oils was in the following order: TN > control > FE > PNH with Induction period values of 23.1 > 6.43 > 5.73 > 2.85 h, respectively. (Author) 20 refs.

  17. Characteristics and Treatment of Wastewater Generated During Underwater Hull Cleaning Operations of U.S. Navy Ships.

    Science.gov (United States)

    1996-12-10

    that hull cleaning wastewater may not be toxic to microalgae in the surface waters because the measured dissolved copper concentrations during hull...relating to hull cleaning. Among other things, the studies measured dissolved copper in the wastewater ranging from 0.13 mg/L to 4.3 mg/L. These...cleanings were lower than the observed IC50 values for the microalgae . Calculations determined the approximate amount of waste that would be generated

  18. Effects of biofouling development on drag forces of hull coatings for ocean-going ships: a review

    DEFF Research Database (Denmark)

    Lindholdt, Asger; Dam-Johansen, Kim; Olsen, S. M.

    2015-01-01

    This review presents a systematic overview of the literature and describes the experimental methods used to quantify the drag of hull coatings. It also summarizes the findings of hull coating's drag performance and identifies the main parameters impacting it. The advantages and disadvantages...... of the reported methods listed in this review provide an assessment of the most efficient methods to quantify the drag performance of hull coatings. This review determines that drag performance of hull coating technology varies depending on whether the coating condition is newly applied, after dynamic or static...

  19. Effects of Hull Scratching, Soaking, and Boiling on Antinutrients in Japanese Red Sword Bean (Canavalia gladiata).

    Science.gov (United States)

    Une, Satsuki; Nonaka, Koji; Akiyama, Junich

    2016-10-01

    The effects of hull processing, soaking, and boiling on the content or activity of antinutrients in the red sword bean (RSB; Canavalia gladiata) were investigated. RSB seeds were compared with kidney bean (KB; Phaseolus vulgaris) seeds that are starch based and often used as processed products in Japan. RSB seeds had higher weight, thicker hull, and higher protein content, but lower moisture content compared with KB seeds. Because of the strong and thick hull, the relative water absorption of untreated RSB seeds was very low after soaking. Seeds were soaked after dehulling, scratching, and roasting. The results showed that hull scratching was the optimal method for increasing water absorption during soaking compared with dehulling and roasting. After soaking, the water used for soaking was discarded, since it had a high content of polyphenols and bitter taste, and RSB seeds were boiled in fresh water for 20, 40, and 60 min. The results showed that polyphenol and tannin contents, antioxidant activity, and hemagglutinating activity, as well as maltase, sucrase, and trypsin inhibitor activities in scratched RSB seeds decreased significantly after boiling compared with those in raw seeds, whereas amylase inhibitor activity showed no significant change. Overall, it was concluded that the combination of hull scratching, soaking, and boiling in fresh water can reduce thermal-stable or sensitive antinutrients in RSB and thus, significantly improve its nutritional value. © 2016 Institute of Food Technologists®.

  20. Genetic Analysis and Mapping of TWH Gene in Rice Twisted Hull Mutant

    Directory of Open Access Journals (Sweden)

    Jin-bo LI

    2009-03-01

    Full Text Available A mutant with twisted hulls was found in a breeding population of rice (Oryza sativa L.. The mutant shows less grain weight and inferior grain quality in addition to twisted hulls. Genetic analysis indicated that the phenotype of mutant was controlled by a single recessive gene (temporarily designated as TWH. To map the TWH gene, an F2 population was generated by crossing the twh mutant to R725, an indica rice variety with normal hulls. For bulked segregant analysis, the bulk of mutant plants was prepared by mixing equal amount of plant tissue from 10 twisted-hull plants and the bulk of normal plants was obtained by pooling equal amount tissue of 10 normal-hull plants. Two hundred and seven pairs of simple sequence repeat (SSR primers, which are distributed on 12 rice chromosomes, were used for polymorphism analysis of the parents and the two bulks. The TWH locus was initially mapped close to the SSR marker RM526 on chromosome 2. Therefore, further mapping was performed using 50 pairs of SSR primers around the marker RM526. The TWH was delimited between the SSR markers RM14128 and RM208 on the long arm of chromosome 2 at the genetic distances of 1.4 cM and 2.7 cM, respectively. These results provide the foundation for further fine mapping, cloning and functional analysis of the TWH gene.

  1. Test Studies of the Resistance and Seakeeping Performance of a Trimaran Planing Hull

    Directory of Open Access Journals (Sweden)

    Ma Weijia

    2015-01-01

    Full Text Available Towing tank tests in calm water were performed on a trimaran planing hull to verify its navigational properties with different displacements and centres of gravity, as well as to assess the effects of air jets and bilge keels on the hull’s planing capabilities, and to increase the longitudinal stability of the hull. Hydrostatic roll tests, zero speed tests, and sea trials in the presence of regular waves were conducted to investigate the hull’s seakeeping ability. The test results indicate that the influence of the location of the centre of gravity on the hull resistance is similar to that of a normal trimaran planing hull; namely, moving the centre of gravity backward will reduce the resistance but lower the stability. Bilge keels improve the longitudinal stability but slightly affect the resistance, and the presence of air jets in the hull’s channels decreases the trim angle and increases heaving but has little effect on the resistance. Frequent small-angle rolling occurs in waves. The heaving and pitching motions peak at the encounter frequency of , and the peaks increase with velocity and move towards greater encounter frequencies. When the encounter frequency exceeds, the hull motion decreases, which leads to changes in the navigation speed and frequency.

  2. Performance of Holstein-Zebu cows under partial replacement of corn by coffee hulls

    Directory of Open Access Journals (Sweden)

    Tavares Anamaria Almeida Costa

    2005-01-01

    Full Text Available Replacement of corn by citrus pulp or coffee hulls explores the potential of dairy cows to digest fiber-rich feedstuffs. However, for the State of Minas Gerais, Brazil, replacing citrus pulp by coffee hulls may reduce milk production costs, since citrus pulp needs to be imported from another state, while coffee hulls are highly available at essentially no cost. The objective of this experiment was to evaluate the performance of crossbred cows fed concentrates containing 25% coffee hulls (Coffee or 25% citrus pulp (Pulp as a replacement for ground corn grain (Corn; 47.4% in the concentrate. Forty-two cows were blocked based on milk yield and allocated to one of the three treatments for 56 days, following a 14-day standardization period. Concentrates were fed twice a day during the milking routine, 1 kg to each 2.5 kg of the average milk yield for the block, determined at the end of the standardization period. The daily 3.5% fat-corrected milk yield was 7.5 kg for Corn, 7.9 kg for Pulp and 6.2 kg for Coffee (P 0.26. The Pulp concentrate provided the highest financial efficiency, while Coffee was the least efficient (P < 0.01. These data suggest that the potential of use of coffee hulls is low when added at rates equal to or greater than 25% of the concentrate offered during the milking routine.

  3. Effects of internal mass distribution and its isolation on the acoustic characteristics of a submerged hull

    Science.gov (United States)

    Peters, Herwig; Kinns, Roger; Kessissoglou, Nicole

    2014-03-01

    The primary aim of machinery isolation in marine vessels is to isolate structural vibration of the onboard machinery from the hull and to reduce far-field radiation of underwater noise. A substantial proportion of the total submarine mass is on flexible mounts that isolate supported masses from the hull at frequencies above the mounting system resonant frequency. This reduces the dynamically effective mass of the hull and affects the signature of the marine vessel due to propeller excitation. A fully coupled finite element/boundary element (FE/BE) model has been developed to investigate the effect of mass distribution and isolation in a submerged hull. The finite element model of the structure includes internal structures to represent the machinery and other flexibly mounted components. Changes in the radiated sound power demonstrate the effect of machinery isolation on the acoustic signature of the submerged hull due to the external propeller forces. Results are also presented to show how the arrangement of flexible mounts for a large internal structure can influence the radiation due to machinery forces.

  4. Development of a remotely controlled testing platform with low-drag air-ventilated hull

    Science.gov (United States)

    Matveev, Konstantin I.; Perry, Nicholaus I.; Mattson, Alexander W.; Chaney, Christopher S.

    2015-03-01

    This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for reducing hydrodynamic drag and pollutant emissions and increasing marine transportation efficiency. Despite this concept's potential, design optimization and high-performance operation of novel air-cavity ships remain a challenging problem. Hull construction and sensor instrumentation of the model-scale air-cavity boat is described in the paper. The modular structure of the hull allows for easy modifications, and an electric propulsion unit enables self-propelled operation. The boat is controlled remotely via a radio transmission system. Results of initial tests are reported, including thrust, speed, and airflow rate in several loading conditions. The constructed platform can be used for optimizing air-cavity systems and testing other innovative hull designs. This system can be also developed into a high-performance unmanned boat.

  5. Roasted sesame hulls improve broiler performance without affecting carcass characteristics

    Directory of Open Access Journals (Sweden)

    Kamel Z. Mahmoud

    2015-09-01

    Full Text Available An experiment was conducted to evaluate the effect of using graded levels of roasted sesame hulls (RSH on growth performance and meat quality characteristics in broiler chickens. A total of 360 day-old Lohmann chicks were randomly allocated into 24 floor pens and raised over 42 days. One of four dietary treatments was assigned to each group of six pens in a completely randomized fashion. The chicks in the control group were fed a corn-soybean based diet (RSH-0, while the chicks in treatments two, three, and four were fed graded levels of RSH at 4% (RSH-4, 8% (RSH-8, and 12% (RSH-12, respectively. Diets were formulated to meet broiler chicks’ requirements according to the National Research Council for both starter and finisher rations. The results showed that RSH inclusion increased (P<0.05 feed intake and final body weight without adversely affecting the feed conversion ratio. Broiler chicks fed RSH-12 had heavier (P<0.05 breast and leg cuts compared to the control-fed group with no change to their chemical composition. Water holding capacity (WHC, cooking loss (CL, and shear force (SF reported similar results in all dietary groups. The chemical composition of both thigh and breast cuts was not affected by the RSH. After one day of thawing, colour coordinates of breast cuts behaved similarly in all dietary groups. The results of this study suggest that the addition of RSH to broiler diets up to 12% improves their growth performance; nevertheless, carcass characteristics and meat quality showed no alterations compared to the control-fed group.

  6. Hull forms and straight forward CFD free running trials of high-speed shuttle vessels

    Directory of Open Access Journals (Sweden)

    WEI Chengzhu

    2017-03-01

    Full Text Available SV-SJTU high-speed shuttle vessels are developed by Shanghai Jiao Tong University for fine seakeeping and high speed purposes. A series of SV-SJTUs have been developed, and are introduced in this paper. Straight forward CFD free running trials were conducted and the results are also presented. Hull resistance and motions are predicted by solving URANS equations and adopting the overset mesh method. The results of the straight forward CFD free running trials prove that SV-SJTUs have little resistance and fine hull motion in calm water, and their wave-making and splashing differ with different hull forms. This paper presents the designs of a variety of high performance ships, thereby providing quantitative and quali-tative references for researchers.

  7. Selectivity of the Cd2+/Ca2+ exchange on modified rice hull silica.

    Science.gov (United States)

    Sánchez-Flores, Norma A; Solache, Marcos; Olguín, M Teresa; Fripiat, José J; Pacheco-Malagón, Graciela; Saniger, José M; Bulbulian, Silvia

    2009-03-01

    The rice hull ash is composed by 94% of SiO2, an agricultural waste that can be recovered and purified by a depolymerization reaction yielding an organo-silicic gel. The purpose of this paper is to show that this silica can be used to fix Cd2+ from aqueous solution. The pH of hydrolysis of the organo-silicic gel is the main factor modifying the distribution between the solid and the solution. The contact time between the Cd2+ solution and the solid was studied to optimize the sorption conditions. The equilibrium measurements were performed after 40 hours at room temperature. The competition with Ca2+ ions in the solutions was also studied in order to evaluate the selectivity of the Cd2+ fixation. It was found that the rice hull ash has a higher capacity to fix Cd2+ than the rice hull derivatives.

  8. Structural Health Monitoring of Tall Buildings with Numerical Integrator and Convex-Concave Hull Classification

    Directory of Open Access Journals (Sweden)

    Suresh Thenozhi

    2012-01-01

    Full Text Available An important objective of health monitoring systems for tall buildings is to diagnose the state of the building and to evaluate its possible damage. In this paper, we use our prototype to evaluate our data-mining approach for the fault monitoring. The offset cancellation and high-pass filtering techniques are combined effectively to solve common problems in numerical integration of acceleration signals in real-time applications. The integration accuracy is improved compared with other numerical integrators. Then we introduce a novel method for support vector machine (SVM classification, called convex-concave hull. We use the Jarvis march method to decide the concave (nonconvex hull for the inseparable points. Finally the vertices of the convex-concave hull are applied for SVM training.

  9. Basic dye adsorption onto an agro-based waste material--sesame hull (Sesamum indicum L.).

    Science.gov (United States)

    Feng, Yanfang; Yang, Fan; Wang, Yongqian; Ma, Li; Wu, Yonghong; Kerr, Philip G; Yang, Linzhang

    2011-11-01

    The aim of this project was to establish an economical and environmentally benign biotechnology for removing methylene blue (MB) from wastewater. The adsorption process of MB onto abandoned sesame hull (Sesamum indicum L.) (SH) was investigated in a batch system. The results showed that a wide range of pH (3.54-10.50) was favorable for the adsorption of MB onto SH. The Langmuir model displayed the best fit for the isothermal data. The exothermic adsorption process fits a pseudo-second-order kinetic model. The maximum monolayer adsorption capacity (359.88 mg g(-1)) was higher than most previously investigated low-cost bioadsorbents (e.g., peanut hull, wheat straw, etc.). This study indicated that sesame hull is a promising, unconventional, affordable and environmentally friendly bio-measure that is easily deployed for removing high levels of MB from wastewater. Copyright © 2011 Elsevier Ltd. All rights reserved.

  10. 40 CFR 180.123a - Inorganic bromide residues in peanut hay and peanut hulls; statement of policy.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Inorganic bromide residues in peanut... RESIDUES IN FOOD Specific Tolerances § 180.123a Inorganic bromide residues in peanut hay and peanut hulls... to cattle of peanut hay and peanut hulls containing residues of inorganic bromides will contribute...

  11. Cultivation of Podospora anserina on soybean hulls results in an efficient enzyme cocktail for plant biomass hydrolysis

    NARCIS (Netherlands)

    Mäkelä, Miia R; Bouzid, Ourdia; Ruiz-Robleto, J.; Post, Harm; Peng, Mao; Heck, Albert; Altelaar, Maarten; de Vries, Ronald P

    2017-01-01

    The coprophilic ascomycete fungus Podospora anserina was cultivated on three different plant biomasses, i.e. cotton seed hulls (CSH), soybean hulls (SBH) and acid-pretreated wheat straw (WS) for four days, and the potential of the produced enzyme mixtures was compared in the enzymatic

  12. Improvement to the Standardization Life-Cycle-Cost Model for Hull, Mechanical, and Electrical Components and Equipments.

    Science.gov (United States)

    1980-03-01

    Electrical Systems B Flame Arrestor-Ventilation Deck and Hull Machinery B Exhaust Floodlight -Electrical Electrical Systems B Flowmeter Fluid Systems B...Deck and Hull Machinery B Light Assembly-Signal Electrical Systems B Light Switch Assembly Electrical Systems C Light- Beacon Electrical Systems D Light

  13. Scattering effect of submarine hull on propeller non-cavitation noise

    Science.gov (United States)

    Wei, Yingsan; Shen, Yang; Jin, Shuanbao; Hu, Pengfei; Lan, Rensheng; Zhuang, Shuangjiang; Liu, Dezhi

    2016-05-01

    This paper investigates the non-cavitation noise caused by propeller running in the wake of submarine with the consideration of scattering effect caused by submarine's hull. The computation fluid dynamics (CFD) and acoustic analogy method are adopted to predict fluctuating pressure of propeller's blade and its underwater noise radiation in time domain, respectively. An effective iteration method which is derived in the time domain from the Helmholtz integral equation is used to solve multi-frequency waves scattering due to obstacles. Moreover, to minimize time interpolation caused numerical errors, the pressure and its derivative at the sound emission time is obtained by summation of Fourier series. It is noted that the time averaging algorithm is used to achieve a convergent result if the solution oscillated in the iteration process. Meanwhile, the developed iteration method is verified and applied to predict propeller noise scattered from submarine's hull. In accordance with analysis results, it is summarized that (1) the scattering effect of hull on pressure distribution pattern especially at the frequency higher than blade passing frequency (BPF) is proved according to the contour maps of sound pressure distribution of submarine's hull and typical detecting planes. (2) The scattering effect of the hull on the total pressure is observable in noise frequency spectrum of field points, where the maximum increment is up to 3 dB at BPF, 12.5 dB at 2BPF and 20.2 dB at 3BPF. (3) The pressure scattered from hull is negligible in near-field of propeller, since the scattering effect surrounding analyzed location of propeller on submarine's stern is significantly different from the surface ship. This work shows the importance of submarine's scattering effect in evaluating the propeller non-cavitation noise.

  14. CO2-H2O based pretreatment and enzyme hydrolysis of soybean hulls.

    Science.gov (United States)

    Islam, S M Mahfuzul; Li, Qian; Loman, Abdullah Al; Ju, Lu-Kwang

    2017-11-01

    The high carbohydrate content of soybean hull makes it an attractive biorefinery resource. But hydrolyzing its complex structure requires concerted enzyme activities, at least cellulase, xylanase, pectinase and α-galactosidase. Effective pretreatment that generates minimal inhibitory products is important to facilitate enzymatic hydrolysis. Combined CO2-H2O pretreatment and enzymatic hydrolysis by Aspergillus niger and Trichoderma reesei enzyme broths was studied here. The pretreatment was evaluated at 80°C-180°C temperature and 750psi-1800psi pressure, with fixed moisture content (66.7%) and pretreatment time (30min). Ground hulls without and with different pretreatments were hydrolyzed by enzyme at 50°C and pH 4.8 and compared for glucose, xylose, galactose, arabinose, mannose and total reducing sugar release. CO2-H2O pretreatment at 1250psi and 130°C was found to be optimal. Compared to the unpretreated hulls hydrolyzed with 2.5-fold more enzyme, this pretreatment improved glucose, xylose, galactose, arabinose and mannose releases by 55%, 35%, 105%, 683% and 52%, respectively. Conversions of 97% for glucose, 98% for xylose, 41% for galactose, 59% for arabinose, 87% for mannose and 89% for total reducing sugar were achieved with Spezyme CP at 18FPU/g hull. Monomerization of all carbohydrate types was demonstrated. At the optimum pretreatment condition, generation of inhibitors acetic acid, furfural and hydroxymethylfurfural (HMF) was negligible, 1.5mg/g hull in total. The results confirmed the effective CO2-H2O pretreatment of soybean hulls at much lower pressure and temperature than those reported for biomass of higher lignin contents. The lower pressure requirement reduces the reactor cost and makes this new pretreatment method more practical and economical. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Fermentative characteristics of coffee pulp silage with different proportions of coffee hulls

    Directory of Open Access Journals (Sweden)

    Adauto Ferreira Barcelos

    2013-03-01

    Full Text Available This study aimed to evaluate the chemical composition and fermentation characteristics of the coffee pulp silages with different proportions of coffee hulls. The material was ensiled in PVC with 150 mm diameter by 750 mm high, according to the treatments: coffee pulp (CoP, CoP + 20% of coffee hulls (CH, CoP + 40% of CH and CoP + 60% CH in a completely randomized design with six replications. The silos were opened 60 days after closing, when samples were taken for determination of dry matter (DM, crude protein (CP, neutral detergent fiber (NDF, acid detergent fiber (ADF, lignin, cellulose, pH, N-NH3, caffeine, calcium (Ca, phosphorus (P and in vitro digestibility of dry matter. We also determined gas production and effluent. There was a linear increase in DM content and pH, and a linear decrease of CP, NDF and ADF, lignin, cellulose, caffeine, Ca and P. This reduction occurs because the coffee hulls have lower levels than pulp to CP, NDF, ADF, caffeine, Ca and P. There was also a linear reduction in N-NH3 values, and only the highest percentage of silage with coffee hulls obtained below 10%, considered as the limit for good quality silage. Effluent production was higher for silage shelled coffee pulp and do not get any production in silage with 60% coffee hull. There was no significant difference in vitro digestibility of dry matter among treatments. The coffee hulls was effective in increasing DM content of CoP silage and to reduce NDF, ADF, N-NH3, providing nutritional value of silage satisfactory for cattle feed, creating an alternative for recovery of such waste. When considering the DM content found in silages, the amount of bark best coffee to be added to coffee pulp for the production of silage is between 30% and 35%.

  16. Oscillator strengths for Be I

    Energy Technology Data Exchange (ETDEWEB)

    Ates, Sule, E-mail: suleates@selcuk.edu.tr; Oezarslan, Selma; Celik, Gueltekin; Taser, Mehmet

    2012-07-15

    The electric dipole oscillator strengths for lines between some singlet and triplet levels have been calculated using the weakest bound electron potential model theory and the quantum defect orbital theory for Be I. In the calculations both multiplet and fine structure transitions are studied. We employed both the numerical Coulomb approximation method and numerical non-relativistic Hartree-Fock wavefunctions for expectation values of radii. The necessary energy values have been taken from experimental energy data in the literature. The calculated oscillator strengths have been compared with available theoretical results. A good agreement with the results in the literature has been obtained.

  17. In vitro antibacterial and free radical scavenging activity of green hull of Juglans regia

    Directory of Open Access Journals (Sweden)

    Pardeep Sharma

    2013-08-01

    Full Text Available Antioxidant supplements from plants are vital to count the oxidative damage in cells. We assessed the antioxidants and antibacterial activity of green hull of Juglans regia in this study. According to our results the maximum antibacterial activity was observed in ethanolic extract when compared to other extract. So, the ethanolic extract was studied for antioxidant activity which exhibited high antiradical activity against DPPH, hydroxyl, and nitric oxide radicals. In conclusion, green hull of J. regia showed strong reducing power activity and total antioxidant capacity. The results justify the therapeutic application of plant in the indigenous system of medicine. Keywords: Juglans regia, Ethanolic extract, Antioxidants, DPPH, Antibacterial activity

  18. Hydrodynamic design of an underwater hull cleaning robot and its evaluation

    Directory of Open Access Journals (Sweden)

    Man Hyung Lee

    2012-12-01

    Full Text Available An underwater hull cleaning robot can be a desirable choice for the cleaning of large ships. It can make the cleaning process safe and economical. This paper presents a hydrodynamic design of an underwater cleaning robot and its evaluation for an underwater ship hull cleaning robot. The hydrodynamic design process of the robot body is described in detail. Optimal body design process with compromises among conflicting design requirements is given. Experimental results on the hydrodynamic performance of the robot are given.

  19. The hydrodynamics analysis for the underwater robot with a spherical hull

    Science.gov (United States)

    Lan, Xiaojuan; Sun, Hanxu; Jia, Qingxuan

    2009-05-01

    The underwater spherical robot has a spherical pressure hull which contains power modules, sensors, and so on. It lacks robot arms or end effectors but is highly maneuverable, for the simplest symmetrical geometry is the sphere. This paper analyzes the spherical robot's hydrodynamic model with CFD software, concludes the spherical robot's hydrodynamic characteristics, and compares these characteristics with the hydrodynamic model of another underwater robot which has a streamlined hull. The effect of sphere hydraulic resistance on the control of the robot is analyzed with some examples.

  20. OPERATION HARDTACK. Project 3.5. Loading and Response of Submarine Hulls from Underwater Bursts

    Science.gov (United States)

    1985-09-01

    Hulls from Underwater Bursts, Extracted Version 12. PERSONAL AUTHOR(S) Rich, H.L., Project Officer; Weinberger, F.; Habib, E.T.; Bort , R.L.; Sette, W.J...SLO A D IN G oa n d R E S P O N S E o f S U B M A R IN E tULLS from UNDERWATER BURSTS H. L. Rich, Project Officer F. Weinberger E.T. Habib R.L. Bort W...OBJECTIVES The objectives established for Project 3.5 were to: (1) determine the range ior lethal hull dam - age to a submarine-like (Squaw) target

  1. Construction of the discrete hull for the combinatorics of a regular pentagonal tiling of the plane

    DEFF Research Database (Denmark)

    Ramirez-Solano, Maria

    2016-01-01

    The article A “regular” pentagonal tiling of the plane by P. L. Bowers and K. Stephenson, Conform. Geom. Dyn. 1, 58–86, 1997, defines a conformal pentagonal tiling. This is a tiling of the plane with remarkable combinatorial and geometric properties. However, it doesn’t have finite local complexi...... combinatorial data, which rather automatically has finite local complexity. In this paper we give a construction of the discrete hull just from the combinatorial data. The main result of this paper is that the discrete hull is a Cantor space....

  2. Acoustic emission localization on ship hull structures using a deep learning approach

    DEFF Research Database (Denmark)

    Georgoulas, George; Kappatos, Vassilios; Nikolakopoulos, George

    2016-01-01

    In this paper, deep belief networks were used for localization of acoustic emission events on ship hull structures. In order to avoid complex and time consuming implementations, the proposed approach uses a simple feature extraction module, which significantly reduces the extremely high dimension......In this paper, deep belief networks were used for localization of acoustic emission events on ship hull structures. In order to avoid complex and time consuming implementations, the proposed approach uses a simple feature extraction module, which significantly reduces the extremely high...

  3. Kenaf (Hibiscus cannabinus L.) core and rice hulls as components of container media for growing Pinus halepensis M. seedlings.

    Science.gov (United States)

    Marianthi, Tsakaldimi

    2006-09-01

    The feasibility of replacing peat or perlite with rice hulls and ground kenaf core to grow a Mediterranean species (Pinus halepensis M.), was investigated. Treatments involved the following growing media: 70 peat:30 perlite as a control, 70 peat:30 rice hulls, 50 peat:50 rice hulls, kenaf (100%) and 60 kenaf:20 peat:20 rice hulls. The seedlings' quality and the physical and chemical properties of the substrates were evaluated. After this, the seedlings were planted in the field and their field performance was recorded. The results showed that the growth medium 70 peat:30 rice hulls can successfully be used for the production of P. halepensis, since the seedlings' nursery and field performance were similar to, or even better than those obtained with the control medium. The seedlings produced in the growth media containing kenaf did not attain a suitable planting size and showed poorer field performance than control seedlings.

  4. Endogenous Phenolics in Hulls and Cotyledons of Mustard and Canola: A Comparative Study on Its Sinapates and Antioxidant Capacity

    Science.gov (United States)

    Mayengbam, Shyamchand; Aachary, Ayyappan; Thiyam-Holländer, Usha

    2014-01-01

    Endogenous sinapic acid (SA), sinapine (SP), sinapoyl glucose (SG) and canolol (CAN) of canola and mustard seeds are the potent antioxidants in various lipid-containing systems. The study investigated these phenolic antioxidants using different fractions of canola and mustard seeds. Phenolic compounds were extracted from whole seeds and their fractions: hulls and cotyledons, using 70% methanol by the ultrasonication method and quantified using HPLC-DAD. The major phenolics from both hulls and cotyledons extracts were SP, with small amounts of SG, and SA with a significant difference of phenolic contents between the two seed fractions. Cotyledons showed relatively high content of SP, SA, SG and total phenolics in comparison to hulls (p mustard cotyledons > mustard seeds > canola seeds > mustard hulls > canola hulls. UPLC-tandem Mass Spectrometry confirmed the presence of sinapates and its fragmentation in these extracts. Further, a high degree of correlation (r = 0.93) was noted between DPPH scavenging activity and total phenolic content. PMID:26785070

  5. Optimizing and Characterizing Geopolymers from Ternary Blend of Philippine Coal Fly Ash, Coal Bottom Ash and Rice Hull Ash

    Directory of Open Access Journals (Sweden)

    Martin Ernesto Kalaw

    2016-07-01

    , scanning electron microscopy (SEM and thermogravimetric analysis (TGA. Using a Scheffé-based mixture design, targeting applications with low thermal conductivity, light weight and moderate strength and allowing for a maximum of five percent by mass of rice hull ash in consideration of the waste utilization of all three components, it has been determined that an 85-10-5 by weight ratio of CFA-CBA-RHA activated with 80-20 by mass ratio of 12 M NaOH and sodium silicate (55% H2O, modulus = 3 produced geopolymers with a compressive strength of 18.5 MPa, a volumetric weight of 1660 kg/m3 and a thermal conductivity of 0.457 W/m-°C at 28-day curing when pre-cured at 80 °C for 24 h. For this study, the estimates of embodied energy and CO2 were all below 1.7 MJ/kg and 0.12 kg CO2/kg, respectively.

  6. Optimizing and Characterizing Geopolymers from Ternary Blend of Philippine Coal Fly Ash, Coal Bottom Ash and Rice Hull Ash

    Science.gov (United States)

    Kalaw, Martin Ernesto; Culaba, Alvin; Hinode, Hirofumi; Kurniawan, Winarto; Gallardo, Susan; Promentilla, Michael Angelo

    2016-01-01

    electron microscopy (SEM) and thermogravimetric analysis (TGA). Using a Scheffé-based mixture design, targeting applications with low thermal conductivity, light weight and moderate strength and allowing for a maximum of five percent by mass of rice hull ash in consideration of the waste utilization of all three components, it has been determined that an 85-10-5 by weight ratio of CFA-CBA-RHA activated with 80-20 by mass ratio of 12 M NaOH and sodium silicate (55% H2O, modulus = 3) produced geopolymers with a compressive strength of 18.5 MPa, a volumetric weight of 1660 kg/m3 and a thermal conductivity of 0.457 W/m-°C at 28-day curing when pre-cured at 80 °C for 24 h. For this study, the estimates of embodied energy and CO2 were all below 1.7 MJ/kg and 0.12 kg CO2/kg, respectively. PMID:28773702

  7. Optimizing and Characterizing Geopolymers from Ternary Blend of Philippine Coal Fly Ash, Coal Bottom Ash and Rice Hull Ash.

    Science.gov (United States)

    Kalaw, Martin Ernesto; Culaba, Alvin; Hinode, Hirofumi; Kurniawan, Winarto; Gallardo, Susan; Promentilla, Michael Angelo

    2016-07-15

    electron microscopy (SEM) and thermogravimetric analysis (TGA). Using a Scheffé-based mixture design, targeting applications with low thermal conductivity, light weight and moderate strength and allowing for a maximum of five percent by mass of rice hull ash in consideration of the waste utilization of all three components, it has been determined that an 85-10-5 by weight ratio of CFA-CBA-RHA activated with 80-20 by mass ratio of 12 M NaOH and sodium silicate (55% H₂O, modulus = 3) produced geopolymers with a compressive strength of 18.5 MPa, a volumetric weight of 1660 kg/m³ and a thermal conductivity of 0.457 W/m-°C at 28-day curing when pre-cured at 80 °C for 24 h. For this study, the estimates of embodied energy and CO₂ were all below 1.7 MJ/kg and 0.12 kg CO₂/kg, respectively.

  8. Density Profiles, Energy, and Oscillation Strength of a Quantum Dot in Two Dimensions with a Harmonic Oscillator External Potential using an Orbital-free Energy Functional Based on Thomas–Fermi Theory

    Directory of Open Access Journals (Sweden)

    Suhufa Alfarisa

    2016-03-01

    Full Text Available This research aims i to determine the density profile and calculate the ground state energy of a quantum dot in two dimensions (2D with a harmonic oscillator potential using orbital-free density functional theory, and ii to understand the effect of the harmonic oscillator potential strength on the electron density profiles in the quantum dot. This study determines the total energy functional of the quantum dot that is a functional of the density that depends only on spatial variables. The total energy functional consists of three terms. The first term is the kinetic energy functional, which is the Thomas–Fermi approximation in this case. The second term is the external potential. The harmonic oscillator potential is used in this study. The last term is the electron–electron interactions described by the Coulomb interaction. The functional is formally solved to obtain the electron density as a function of spatial variables. This equation cannot be solved analytically, and thus a numerical method is used to determine the profile of the electron density. Using the electron density profiles, the ground state energy of the quantum dot in 2D can be calculated. The ground state energies obtained are 2.464, 22.26, 90.1957, 252.437, and 496.658 au for 2, 6, 12, 20, and 56 electrons, respectively. The highest electron density is localized close to the middle of the quantum dot. The density profiles decrease with the increasing distance, and the lowest density is at the edge of the quantum dot. Generally, increasing the harmonic oscillator potential strength reduces the density profiles around the center of the quantum dot.

  9. Injection molded plastic helical gear filled with carbon powder made from rice hull

    Science.gov (United States)

    Chen, Yen Chu; Itagaki, Takayoshi; Takahashi, Hideo; Takahashi, Mikio

    2017-07-01

    Natural materials are focused on the ecological responsibility, all over the world. The rice-hull contains natural silica about 20 wt.%. Therefore, a carbonized rice-hull; Rice-Hull-Silica-Carbon (RHSC) is focused as effective utilization of the discarded rice hull. In this study, test plastic helical gears were made form polyacetal copolymer filled with RHSC powder by injection molding. Test helical gears were operated on endurance test. The bulk temperature and noise of test gears were measured during gears operation. Then, the tooth damage of test gears were investigated by using optical microscope. It is clarified that difference of tooth damage by kind of test gears. Moreover, the transition of gear bulk temperature and noise during operation are investigated. Based on these results, the effect of RHSC powder is discussed. From the discussions, it seems reasonable to conclude : (1) The heat resistance of plastic gear is improved by adding the RHSC powder. (2) The fatigue life of plastic gear is improved by adding suitable amount of the RHSC powder. (3) The sound pressure level of plastic gear is reduced by adding the smaller median grain diameter of RHSC powder.

  10. 14 CFR 25.529 - Hull and main float landing conditions.

    Science.gov (United States)

    2010-01-01

    ... float landing conditions. (a) Symmetrical step, bow, and stern landing. For symmetrical step, bow, and stern landings, the limit water reaction load factors are those computed under § 25.527. In addition— (1.... (b) Unsymmetrical landing for hull and single float seaplanes. Unsymmetrical step, bow, and stern...

  11. 14 CFR 23.529 - Hull and main float landing conditions.

    Science.gov (United States)

    2010-01-01

    ... Water Loads § 23.529 Hull and main float landing conditions. (a) Symmetrical step, bow, and stern landing. For symmetrical step, bow, and stern landings, the limit water reaction load factors are those.... Unsymmetrical step, bow, and stern landing conditions must be investigated. In addition— (1) The loading for...

  12. The flavonoid herbacetin diglucoside as a constituent of the lignan macromolecule from flaxseed hulls

    NARCIS (Netherlands)

    Struijs, K.; Vincken, J.P.; Verhoef, R.P.; Oostveen, van W.H.M.; Voragen, A.G.J.; Gruppen, H.

    2007-01-01

    Lignans in flaxseed are known to be part of a macromolecule in which they are connected through the linker-molecule hydroxy-methyl-glutaric acid (HMGA). In this study, the lignan macromolecule was extracted from flaxseed hulls and degraded to its monomeric constituents by complete saponification.

  13. Parboiled rice hull mulch in containers reduces liverwort and bittercress growth

    Science.gov (United States)

    Use of preemergence herbicides for weed control is not always possible; some crops and many enclosed production sites are not labeled for herbicide applications. The objective of this research was to determine the utility of parboiled rice hull mulch for controlling two of the most common weeds in ...

  14. Chemical composition, antioxidant and antibacterial properties of Bene (Pistacia atlantica subsp. mutica) hull essential oil

    National Research Council Canada - National Science Library

    Rezaie, Mitra; Farhoosh, Reza; Sharif, Ali; Asili, Javad; Iranshahi, Mehrdad

    2015-01-01

    .... In this study, sixty three compounds were identified in the essential oil (EO) of Bene hull. The major components were determined to be α-pinene (20.8 %), camphene (8.4 %), β-myrcene (8.2 %) and limonene (8...

  15. Anti-diabetic effects of rice hull smoke extract in alloxan-induced diabetic mice

    Science.gov (United States)

    We investigated the protective effect of a liquid rice hull smoke extract (RHSE) against diabetes in alloxan-induced diabetic mice. Anti-diabetic effects of RHSE were evaluated in both the rat insulinoma-1 cell line (INS-1) and diabetic ICR mice induced by inraperitoneal (ip) injection of alloxan. ...

  16. 46 CFR 115.650 - Alternative Hull Examination (AHE) Program options: Divers or underwater ROV.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Alternative Hull Examination (AHE) Program options: Divers or underwater ROV. 115.650 Section 115.650 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND...

  17. 46 CFR 176.630 - The Alternative Hull Examination (AHE) Program application.

    Science.gov (United States)

    2010-10-01

    ... conducting the hull examination; (b) The name of the participating diving contractor and underwater remotely operated vehicle (ROV) company accepted by the OCMI under § 176.650 of this part; (c) The name and... damage, underwater body cleanliness (if known), and the anticipated draft of the vessel at the time of...

  18. Characterization of hydrolytic degradation of polylactic acid/rice hulls composites in water at different temperatures

    Directory of Open Access Journals (Sweden)

    2011-02-01

    Full Text Available Hydrolytic degradations of polylactic acid/rice hulls (PLA/RH composites with various rice hulls contents due to water absorptions at 23, 51 and 69°C were investigated by studying the thermal properties, chemical composition, molecular weight, and morphology of the degraded products. The results have attested that the stability of PLA/RH composites in water depends slightly on rice hulls contents but it is significantly influenced by water temperature. Water absorption in 30 days at 23°C was between 0.87 and 9.25% depending on rice hull contents. However, at thermophilic temperatures, the water absorption and degradation of these products were increased significantly. Saturations were achieved in less than 25 and 9 days at 51°C and 69°C, respectively, while hydrolytic degradation was demonstrated by an increase in fragility and development of crystallinity. At 69°C, there were significant reductions of the decomposition and glass transition temperatures of the polymer by 13°C. These changes were associated with the reduction of the molecular weight of PLA from 153.1 kDa to ~10.7 kDa due to hydrolysis of its ester group.

  19. The Effect of Hull Biofouling on Parameters Characterising Ship Propulsion System Efficiency

    Directory of Open Access Journals (Sweden)

    Tarełko Wiesła

    2015-01-01

    Full Text Available One of most important issues concerning technical objects is the increase of their operating performance. For a ship this performance mainly depends on the efficiency of its main pro-pulsion system and the resistance generated during its motion on water. The overall ship re-sistance, in turn, mainly depends on the hull friction resistance, closely related with the pres-ence of different types of roughness on the hull surface, including underwater part biofouling. The article analyses the effect of hull biofouling on selected parameters characterising the efficiency of the ship propulsion system with adjustable propeller. For this purpose a two-year research experiment was performed on a sailing vessel during its motor navigation phases. Based on the obtained results, three groups of characteristics were worked out for different combinations of engine rotational speed and adjustable propeller pitch settings. The obtained results have revealed that the phenomenon of underwater hull biofouling affects remarkably the parameters characterising propulsion system efficiency. In particular, the development of the biofouling layer leads to significant reduction of the speed of navigation.

  20. A mutation in the rice chalcone isomerase gene causes the golden hull and internode 1 phenotype.

    Science.gov (United States)

    Hong, Lilan; Qian, Qian; Tang, Ding; Wang, Kejian; Li, Ming; Cheng, Zhukuan

    2012-07-01

    The biosynthesis of flavonoids, important secondary plant metabolites, has been investigated extensively, but few mutants of genes in this pathway have been identified in rice (Oryza sativa). The rice gold hull and internode (gh) mutants exhibit a reddish-brown pigmentation in the hull and internode and their phenotype has long been used as a morphological marker trait for breeding and genetic study. Here, we characterized that the gh1 mutant was a mutant of the rice chalcone isomerase gene (OsCHI). The result showed that gh1 had a Dasheng retrotransposon inserted in the 5′ UTR of the OsCHI gene, which resulted in the complete loss of OsCHI expression. gh1 exhibited golden pigmentation in hulls and internodes once the panicles were exposed to light. The total flavonoid content in gh1 hulls was increased threefold compared to wild type. Consistent with the gh1 phenotype, OsCHI transcripts were expressed in most tissues of rice and most abundantly in internodes. It was also expressed at high levels in panicles before heading, distributed mainly in lemmas and paleae, but its expression decreased substantially after the panicles emerged from the sheath. OsCHI encodes a protein functionally and structurally conserved to chalcone isomerases in other species. Our findings demonstrated that the OsCHI gene was indispensable for flux of the flavonoid pathway in rice.

  1. Rice hull smoke extract protects mice against a salmonella lipopolysaccharide-induced endotoxemia

    Science.gov (United States)

    Rice hulls accounting for 20% of the rice crop are a byproduct of post-harvest rice processing. Endotoxemia (sepsis, septic shock) is an inflammatory, virulent often fatal disease that results mainly from infection with Salmonella and other Gram-negative bacteria. The present study investigated the...

  2. Effect of Graded Levels of Soybean Hull on Blood, Carcass and ...

    African Journals Online (AJOL)

    Effect of Graded Levels of Soybean Hull on Blood, Carcass and Organ Characteristics of Grower Pigs. ... (MCV) values with the groups on SBH diets. The heart girth circumference, heart weight, kidney weight, live body weight, and dressed carcass weight were all significantly (p<0.05) affected by the dietary levels of SBH.

  3. Quality characteristics of low fat chicken nuggets: effect of salt substitute blend and pea hull flour.

    Science.gov (United States)

    Verma, Arun K; Banerjee, Rituparna; Sharma, Brahma Deo

    2015-04-01

    Effect of salt substitution (Treat I) and added pea hull flour (PHF) at 8 (Treat-II), 10 (Treat-III) and 12 % (Treat-IV) levels on the quality of low fat chicken nuggets (Control) was investigated. Replacement of NaCl significantly affected (P nuggets without significant effect on various attributes.

  4. Micro-heterogeneity of corn hulls cellulosic fiber biopolymer studied by multiple-particle tracking (MPT)

    Science.gov (United States)

    A novel technique named multiple-particle tracking (MPT) was used to investigate the micro-structural heterogeneities of Z-trim, a zero calorie cellulosic fiber biopolymer produced from corn hulls. The Multiple-Particle Tracking (MPT) method was used in this study, which was originally described by ...

  5. Ship hull fouling in the port of Recife, Pernambuco

    Directory of Open Access Journals (Sweden)

    Cristiane Maria Rocha Farrapeira

    2007-09-01

    Full Text Available Ports of big coastal cities are exposed to exotic species as a consequence of shipping traffic. As the Port of Recife receives an annual average of 491 ships from other regions of Brazil and from all over the world, this work was aimed at knowing which marine animals were passively transported on such vessels hulls, in order to map and monitor new bioinvasions in the area. Thus, 32 vessels of several origins were investigated between November 2005 and March 2006, samples were taken and the macrofauna identified. Sixty species of associated animals were identified, consisting of 28 sessile species, particularly the Cirripedia Balanomorpha and Lepadomorpha as dominants, 8 sedentary animals, namely Mytillidae and Dreissenidae and 23 free-living species, particularly, Caprellidae, Gammaridae, Tanaidacea, Turbellaria, Nemertea and Polychaeta. The first occurrence of Conchoderma virgatum was recorded with exact location for the Brazilian littoral, and Conchoderma auritum, Amphibalanus subalbidus and Haliplanella lineata were recorded for the first time at the littoral of Pernambuco State. The invasion pathway was confirmed for Amphibalanus reticulatus and Mytilopsis leucophaeta, invader species of the estuarine area of Recife's city. Megabalanus coccopoma was considered as a risk invader species for the region.Regiões portuárias das grandes cidades litorâneas estão sujeitas à recepção de espécies exóticas como conseqüência da movimentação dos navios. Como o Porto do Recife recebe uma média anual de 491 atracações de navios, provenientes de várias regiões do Brasil e do mundo, objetivou-se conhecer quais animais marinhos eram transportados passivamente nos cascos das embarcações para mapear e monitorar novas invasões biológicas na área. Assim, foram investigados 32 barcos de diversas origens, nos meses de novembro de 2005 a março de 2006, tendo a macrofauna sido amostrada e identificada. Foram encontradas 60 espécies de animais

  6. Antiplatelet Aggregation Activity of Walnut Hull Extract via Suppression of Reactive Oxygen Species Generation and Caspase Activation

    Directory of Open Access Journals (Sweden)

    Azadeh Meshkini

    2017-06-01

    Full Text Available Walnut hull (wal hull is an agricultural by-product that is widely used in traditional medicine for alleviating pain and treating skin diseases, however, recently it has gained much attention in modern pharmacology due to its antioxidant properties. The current study was aimed to determine the total phenolic, flavonoid, and tannin content of Persian wal hull extract and evaluate its biological effects on platelet function. Experimental data showed that acetone extract of wal hulls has a high content of polyphenolic compounds and antioxidant properties. The analytical study of crude extract by gas chromatography–mass spectrometry demonstrated different types of high- and low-molecular-weight compounds that are basically and biologically important. Moreover, an in vitro study revealed that wal hull extract at a concentration of 50 μg/mL inhibited thrombin-induced platelet aggregation and protein secretion by 50%, without any cytotoxic effects on platelets. The examined extract suppressed reactive oxygen species generation and also caspase activation in thrombin-stimulated platelets. Identically, N-acetylcysteine inhibited the increase of reactive oxygen species level induced by thrombin in platelets, and supported a link between cellular redox status and caspase activation in activated platelets. Presumably, the antiplatelet activity of wal hull extract is related to its polyphenolic compounds and their antioxidant properties. Therefore, wal hulls can be considered as a candidate for thrombotic disorders.

  7. Rice hull extracts inhibit proliferation of MCF-7 cells with G₁ cell cycle arrest in parallel with their antioxidant activity.

    Science.gov (United States)

    Chung, Nam-Jin; Choi, Ki-Choon; Lee, Seung-Ah; Baek, Jin-A; Lee, Jeong-Chae

    2015-03-01

    Rice (Oryza sativa L.) has been a major dietary staple worldwide for centuries. Growing interest in the beneficial effects of antioxidants has inspired investigation of rice hulls as an attractive source of chemopreventive compounds for breast cancer intervention. We prepared methanol extracts from rice hulls of three Korean bred cultivars (japonica), Ilpum, Heugjinju, and Jeogjinju, and one japonica weedy rice, WD-3. We examined the antiproliferative potential of the hull extracts on MCF-7 human breast cancer cells and the related mechanisms thereof. Hull extracts inhibited proliferation of the cells and mediated G0/G1 phase arrest by suppressing cyclins and cyclin-dependent kinases, where WD-3 extract showed the most potent. Blockage of p21 expression by small interfering RNA transfection attenuated G1 phase arrest induced by WD-3 extract. The WD-3 extract exhibited greater antioxidant potential and total phenolic compounds, compared with other rice hulls. Gas chromatography-mass spectrometry analysis for the F4 fractioned from WD-3 extract revealed that cinnamic acid derivatives were the major active constituents. The F4 fraction most potently inhibited proliferation of MCF-7 cells than WD-3 extract through the suppression of cell cycle regulatory factors. Collectively, our results suggest that the pigmented rice hulls possess greater antioxidant and chemopreventive activity against breast cancer than the other rice cultivars tested, demonstrating that WD-3 rice hulls are an attractive source of chemopreventive bioactive compounds.

  8. Impact of total substitution of corn for soybean hulls in diets for lambs

    Directory of Open Access Journals (Sweden)

    Milena Patricia Viana Bastos

    2015-03-01

    Full Text Available The experiment was conducted to assess the effect of substituting corn for soybean hulls on the apparent digestibility of nutrients, carcass performance and characteristics, and yield of cuts of 25 non-castrated male Santa Ines lambs with an initial body weight of 20±2 kg, at approximately 6 months of age, sheltered individually in stalls (1.10 × 1.0 m, considering a totally randomized design, fed 600 g/kg of forage and 400 g/kg of concentrate. Soybean hulls replaced corn at 0, 250, 500, 750, and 1,000 g/kg of dry matter. The intake of dry matter (DM, organic matter (OM, neutral detergent fiber (NDF, acid detergent fiber (ADF, NDF corrected for ash and protein (NDFap, total carbohydrates (TC, non-fibrous carbohydrates (NFC and total digestible nutrients (TDN in g/day, and the digestibility of NFC increased linearly with the soybean hull replacement. Crude protein intake displayed a quadratic response, whereas the intake of EE in g/day, the apparent digestibility coefficients of DM, OM, CP, EE, NDF, ADF, NDFap and TC, TDN, average daily gain, carcass characteristics, and yield of cuts were not affected by the soybean hull levels. Soybean hull substitution increased the intake of DM and nutrients, making it possible to replace up to 1,000 g/kg of dry matter in the diets for confined sheep, as it does not compromise performance, digestibility, carcass characteristics, or yield of cuts when used in sheep nutrition.

  9. On the Influence of Hull Girder Flexibility on the Wave

    DEFF Research Database (Denmark)

    Seng, Sopheak; Andersen, Ingrid Marie Vincent; Jensen, Jørgen Juncher

    2012-01-01

    Numerical predictions and model test results of the wave induced bending moments in a 9,400 TEU post-Panamax container vessel are presented for two regular wave scenarios. Different numerical procedures have been applied: a linear and non-linear time-domain strip theory and a direct calculation (...

  10. The strength of glass, hidden damage

    NARCIS (Netherlands)

    Veer, F.A.; Rodichev, Y.M.

    2010-01-01

    The strength of float glass is a necessary engineering parameter. Determining this strength is a complex problem. Earlier results have shown that statistically bending test results are not a homogeneous group. To explain this, a theoiy of "hidden damage" is proposed. The essence of this theory is

  11. Strength of Cracked Reinforced Concrete Disks

    DEFF Research Database (Denmark)

    Hoang, Cao Linh; Nielsen, Mogens Peter

    1999-01-01

    The paper deals with models, based on the theory of plasticity, to be used in strength assessments of reinforced concrete disks suffering from different kinds of cracking. Based on the assumption that the sliding strength of concrete is reduced in sections where cracks are located, solutions...

  12. Strength and fracture of engineering fluids

    Energy Technology Data Exchange (ETDEWEB)

    Felbeck, D.K.; Atkins, A.G.

    1984-01-01

    An undergraduated-level text providing an update on theories of strength and practical developments of stronger materials. Attention is also paid to problems with high-performance composite materials, failure analysis, and brittle fracture. Some chapters with problems but no answers. Contents: traditional strength tests and mechanical processing, pure elements, single phases, martensites, fracture, irons, cermics and glasses, composites, index.

  13. On the Binding Strength Sequence for Nucleic Acid Bases and C60 with Density Functional and Dispersion-corrected Density Functional Theories: Whether C60 could protect nucleic acid bases from radiation-induced damage?

    Science.gov (United States)

    Sun, Wenming; Bu, Yuxiang; Wang, Yixuan

    2011-01-01

    The major objective of this paper is to address a controversial binding sequence between nucleic acid bases (NABs) and C60 by investigating adsorptions of NABs and their cations on C60 fullerene with a variety of density functional theories including two novel hybrid meta-GGA functionals, M05-2x and M06-2x, as well as a dispersion-corrected density functional, PBE-D. The M05-2x/6-311++G** provides the same binding sequence as previously reported, guanine(G) > cytosine(C) > adenine (A) > thymine (T); however, M06-2x switches the binding strengths of A and C, and PBE-D eventually results in the following sequence, G>A>T>C, which is the same as the widely accepted hierarchy for the stacking of NABs on other carbon nanomaterials such as single-walled carbon nanotube and graphite. The results indicate that the questionable relative binding strength is due to insufficient electron correlation treatment with the M05-2x or even the M06-2x method. The binding energy of G@C60 obtained with the M06-2x/6-311++G(d,p) and the PBE-D/cc-pVDZ is −7.10 and −8.07 kcal/mol, respectively, and the latter is only slightly weaker than that predicted by the MP2/6-31G(d,p) (−8.10kca/mol). Thus, the PDE-D performs better than the M06-2x for the observed NAB@C60 π-stacked complexes. To discuss whether C60 could prevent NABs from radiation-induced damage, ionization potentials of NABs and C60, and frontier molecular orbitals of the complexes NABs@C60 and (NABs@C60)+ are also extensively investigated. These results revealed that when an electron escapes from the complexes, a hole was preferentially created in C60 for T and C complexes, while for G and A the hole delocalizes over the entire complex, rather than a localization on the C60 moiety. The interesting finding might open a new strategy for protecting DNA from radiation-induced damage and offer a new idea for designing C60-based antiradiation drugs. PMID:21625361

  14. Ultimate strength performance of tankers associated with industry corrosion addition practices

    Directory of Open Access Journals (Sweden)

    Do Kyun Kim

    2014-09-01

    Full Text Available In the ship and offshore structure design, age-related problems such as corrosion damage, local denting, and fatigue damage are important factors to be considered in building a reliable structure as they have a significant influence on the residual structural capacity. In shipping, corrosion addition methods are widely adopted in structural design to prevent structural capacity degradation. The present study focuses on the historical trend of corrosion addition rules for ship structural design and investigates their effects on the ultimate strength performance such as hull girder and stiffened panel of double hull oil tankers. Three types of rules based on corrosion addition models, namely historic corrosion rules (pre-CSR, Common Structural Rules (CSR, and harmonised Common Structural Rules (CSRH are considered and compared with two other corrosion models namely UGS model, suggested by the Union of Greek Shipowners (UGS, and Time-Dependent Corrosion Wastage Model (TDCWM. To identify the general trend in the effects of corrosion damage on the ultimate longitudinal strength performance, the corrosion addition rules are applied to four representative sizes of double hull oil tankers namely Panamax, Aframax, Suezmax, and VLCC. The results are helpful in understanding the trend of corrosion additions for tanker structures.

  15. Ultimate strength performance of tankers associated with industry corrosion addition practices

    Directory of Open Access Journals (Sweden)

    Kim Do Kyun

    2014-09-01

    Full Text Available In the ship and offshore structure design, age-related problems such as corrosion damage, local denting, and fatigue damage are important factors to be considered in building a reliable structure as they have a significant influence on the residual structural capacity. In shipping, corrosion addition methods are widely adopted in structural design to prevent structural capacity degradation. The present study focuses on the historical trend of corrosion addition rules for ship structural design and investigates their effects on the ultimate strength performance such as hull girder and stiffened panel of double hull oil tankers. Three types of rules based on corrosion addition models, namely historic corrosion rules (pre-CSR, Common Structural Rules (CSR, and harmonised Common Structural Rules (CSRH are considered and compared with two other corrosion models namely UGS model, suggested by the Union of Greek Shipowners (UGS, and Time-Dependent Corrosion Wastage Model (TDCWM. To identify the general trend in the effects of corrosion damage on the ultimate longitudinal strength performance, the corrosion addition rules are applied to four representative sizes of double hull oil tankers namely Panamax, Aframax, Suezmax, and VLCC. The results are helpful in understanding the trend of corrosion additions for tanker structures

  16. The roles of the convex hull and the number of potential intersections in performance on visually presented traveling salesperson problems.

    Science.gov (United States)

    Vickers, Douglas; Lee, Michael D; Dry, Matthew; Hughes, Peter

    2003-10-01

    The planar Euclidean version of the traveling salesperson problem requires finding the shortest tour through a two-dimensional array of points. MacGregor and Ormerod (1996) have suggested that people solve such problems by using a global-to-local perceptual organizing process based on the convex hull of the array. We review evidence for and against this idea, before considering an alternative, local-to-global perceptual process, based on the rapid automatic identification of nearest neighbors. We compare these approaches in an experiment in which the effects of number of convex hull points and number of potential intersections on solution performance are measured. Performance worsened with more points on the convex hull and with fewer potential intersections. A measure of response uncertainty was unaffected by the number of convex hull points but increased with fewer potential intersections. We discuss a possible interpretation of these results in terms of a hierarchical solution process based on linking nearest neighbor clusters.

  17. Evaluation of Test Antifouling (AF) and Foul Release Coating Systems on Bilge Keel Panels and Ship Hulls

    National Research Council Canada - National Science Library

    Radakovich, Thomas

    2004-01-01

    .... Evaluation consisted of two phases, bilge keel panel testing and hull patch testing. Four ships served as test platforms for bilge keel panel testing; USS FOSTER (DD 980). USS THOMAS GATES (CG 51), USS LEYTE GULF (CG 55...

  18. Embryonic origins of hull cells in the flatworm Macrostomum lignano through cell lineage analysis: developmental and phylogenetic implications.

    Science.gov (United States)

    Willems, Maxime; Egger, Bernhard; Wolff, Carsten; Mouton, Stijn; Houthoofd, Wouter; Fonderie, Pamela; Couvreur, Marjolein; Artois, Tom; Borgonie, Gaëtan

    2009-08-01

    The development of macrostomid flatworms is of interest for evolutionary developmental biology research because these taxa combine characteristics of the canonical spiral cleavage pattern with significant deviations from this pattern. One such deviation is the formation of hull cells, which surround the remaining embryonic primordium during early development. Using live observations with a 4D microscope system, histology, and 3D reconstructions, we analyzed the ontogeny of these hull cells in the macrostomid model organism Macrostomum lignano. Our cell lineage analysis allowed us to find the precursors of the hull cells in this species. We discuss the relation between macrostomid development and the development of other spiralians and the question of whether hull cells are homologous within rhabditophoran flatworms.

  19. The influence of proanthocyanidin-rich bean hulls and level of dietary protein on energy metabolizability and nutrient digestibility by adult cockerels.

    Science.gov (United States)

    Longstaff, M A; Feuerstein, D; McNab, J M; McCorquodale, C

    1993-07-01

    Cotyledons and hulls were prepared from twelve varieties of field beans (Vicia faba L.). Adult cockerels were tube-fed either beans, cotyledons or hull diets containing high or low levels of protein. Metabolizable energy coefficients and starch digestibility coefficients were determined for beans, cotyledons and hull diets. Lipid digestibility coefficients from hull diets were also determined. When cotyledons were fed there were no significant differences in the way in which adult cockerels metabolized energy or digested starch from the proanthocyanidin-free and proanthocyanidin-rich varieties (0.780, 0.908, 0.775 and 0.918 respectively). When beans were fed, however, both energy metabolizability and starch digestibility decreased due to the presence of hulls, with proanthocyanidin-rich hulls decreasing values the most to 0.660 and 0.819 respectively, and proanthocyanidin-free hulls decreasing values to a lesser extent to 0.709 and 0.886 respectively. Diets composed of proanthocyanidin-rich hulls depressed metabolizable energy and maize starch digestibility. Their effect on maize starch digestibility, however, was considerably less than that on bean starch. Lipid digestibility was enhanced by proanthocyanidins but only when the protein content of the diet was high. There was a significant correlation (P bean starch digestibility v. proanthocyanidin content of coloured-flowered bean hulls (P < 0.001). The regression of maize starch digestibility v. hull proanthocyanidins was also significant at P < 0.005.

  20. Structural vibration and acoustic radiation of coupled propeller-shafting and submarine hull system due to propeller forces

    Science.gov (United States)

    Qu, Yegao; Su, Jinpeng; Hua, Hongxing; Meng, Guang

    2017-08-01

    This paper investigates the structural and acoustic responses of a coupled propeller-shafting and submarine pressure hull system under different propeller force excitations. The entire system, which consists of a rigid propeller, a main shaft, two bearings and an orthogonally stiffened pressure hull, is submerged in a heavy fluid. The shaft is elastically connected to the pressure hull by a radial bearing and a thrust bearing. The theoretical model of the structural system is formulated based on a modified variational method, in which the propeller, the main shaft and the bearings are treated as a lumped mass, an elastic beam and spatially distributed spring-damper systems, respectively. The rings and stringers in the pressure hull are modeled as discrete structural elements. The acoustic field generated by the hull is calculated using a spectral Kirchhoff-Helmholtz integral formulation. A strongly coupled structure-acoustic interaction analysis is employed to achieve reasonable solutions for the coupled system. The displacement of the pressure hull and the sound pressure of the fluid are expanded in the form of a double mixed series using Fourier series and Chebyshev orthogonal polynomials, providing a flexible way for the present method to account for the individual contributions of circumferential wave modes to the vibration and acoustic responses of the pressure hull in an analytical manner. The contributions of different circumferential wave modes of the pressure hull to the structural and acoustic responses of the coupled system under axial, transversal and vertical propeller forces are investigated. Computed results are compared with those solutions obtained from the coupled finite element/boundary element method. Effects of the ring and the bearing stiffness on the acoustic responses of the coupled system are discussed.

  1. Performance and carcass traits of goat kids fed high-concentrate diets containing citrus pulp or soybean hulls

    Directory of Open Access Journals (Sweden)

    Daniel Montanher Polizel

    2016-04-01

    Full Text Available ABSTRACT: The objective in this trial was to determine the effects of partial replacement of ground corn by citrus pulp or soybean hulls on performance and carcass characteristics of feedlot goat kids. Twenty one Boer x Saanen kids (initial BW 15.8 ± 0.7kg, nine males and 12 females, were distributed in a complete randomized block design, according to sex and initial body weight. Treatments were set by replacing 50% of ground corn (DM basis for citrus pulp or soybean hulls; whereas, forage concentrate ratio was of 10:90. Partial replacement of corn by citrus pulp or soybean hulls increased dry matter intake, average daily gain and final body weight, but feed efficiency was not affected. There was no difference between citrus pulp or soybean hulls. Inclusion of coproducts increased slaughter weight, hot and cold carcass weight and longissimus muscle area, with no difference between citrus pulp and soybean hulls. Subcutaneous fat thickness, hot and cold carcass yields, shrink after chilling and body wall thickness were not affected by treatments. Citrus pulp and soybean hulls can replace 50% of ground corn (DM basis increasing dry matter intake and weight gain in goat kids enabling higher slaughter weight at earlier age.

  2. Influence of harvest year in the physicochemical properties and antioxidant activity of flaxseed hull oils from Tunisia

    Directory of Open Access Journals (Sweden)

    Wahid Herchi

    2015-03-01

    Full Text Available The objective of this research was to determine the effect of five years on physico-chemical characteristics and antioxidant activity of flaxseed hull oils. Oil and protein on flaxseed hull varied between 20.15 and 22.56 and 17.45 and 19.14, respectively. The albumin fraction dominated the seed hull protein composition (44 - 47%. Flaxseed hull oils showed significantly high unsaturated to saturated fatty acid ratios (6.61 - 8.36 and calculated oxidizability (Cox values (10.88 - 12.30. The physiochemical parameters determined included saponification value (SV (174 -182 mg KOH/g, unsaponifiable matter (UM (1.32 - 1.64%, peroxide value (PV (1.70 - 2.20 mequiv/kg, Oxidation value (OV (4.40 - 5.90 and oil stability (1.10 - 1.42 h. The highest content of total phenolic acids and total tocopherols were recorded on hull sample collected in 2008. Flavanoid content ranged from 11 to 19 mg/100 g oil. Antioxidant activity differed significantly; the greatest inhibition (61.38% was for the hull sample collected in 2008.

  3. Distribution Characterization of Leaf and Hull Pubescences and Genetic Analysis of Their Numbers in japonica Rice (Oryza sativa

    Directory of Open Access Journals (Sweden)

    Xiao-biao ZHU

    2008-12-01

    Full Text Available Distributions of pubescences on leaf blade and hull in japonica rice were observed under an optical microscope. Numbers of leaf and hull pubescences in P1, P2, F1, B1, B2 and F2 generations were investigated in three combinations of japonica rice (Sidao 10A/Wuyujing 3R, Wuyujing 3A/Sidao 10R and Liuyan 189A/HR-122, and genetic analysis for these two traits were conducted by using the joint analysis method of P1, P2, F1, B1, B2 and F2 generations with the mixed major gene plus polygene inheritance models. Leaf pubescences characterized by swollen base and fine tip distributed regularly on the boundary between dark green stripe and light green stripe of leaf blade. Hull pubescences with various lengths distributed irregularly on the whole hull. Numbers of leaf pubescences in the reciprocal combinations of Sidao 10A/Wuyujing 3R and Wuyujing 3A/Sidao 10R and numbers of hull pubescences in all the three combinations were controlled by one pair of additive major genes plus additive-dominant polygenes. In the combination of Liuyan 189A/HR-122, number of leaf pubescences was controlled by one pair of additive-dominant major genes plus additive-dominant polygenes. Both numbers of leaf and hull pubescences were mainly governed by major genes.

  4. Hull Formula and Standard of Compensation for Expropriation in Postcolonial States

    Directory of Open Access Journals (Sweden)

    M. Ya’kub Aiyub Kadir

    2017-08-01

    ABSTRAK: Setelah progam dekolonisasi negara-negara jajahan, salah satu isu yang mencuat dalam hukum internasional adalah perlindungan investasi asing dari nasionalisasi  negera negara baru merdeka. Dalam hal ini hull formula yang mulanya didesain oleh negara Amerika terhadap Mexico, digunakan sebagai standar kompensasi dari nasionalisasi. Dari perspektif negara negara poskolonial standar ini dianggap tidak adil, bahkan standar ini digunakan hanya untuk memperkuat dominasi negara negara penjajah di bekas jajahannya. Dengan menggunakan metodologi kajian hukum kritis, tulisan ini ingin mengkaji sejauhmana relevansi hull formula untuk diterapkan dalam konteks negara-negara poskolonial. Tulisan ini diharapkan dapat berkontribusi untuk pemahaman konsep tentang standar kompensasi terhadap nasionalisasi di negara negara poskolonial, dan dapat membuka wacana merumuskan kembali standar secara lebih fair dan adil dari perspektif  negara postkolonial.

  5. Coefficients of Propeller-hull Interaction in Propulsion System of Inland Waterway Vessels with Stern Tunnels

    Directory of Open Access Journals (Sweden)

    Jan Kulczyk

    2014-09-01

    Full Text Available Propeller-hull interaction coefficients - the wake fraction and the thrust deduction factor - play significant role in design of propulsion system of a ship. In the case of inland waterway vessels the reliable method of predicting these coefficients in early design stage is missing. Based on the outcomes from model tests and from numerical computations the present authors show that it is difficult to determine uniquely the trends in change of wake fraction and thrust deduction factor resulting from the changes of hull form or operating conditions. Nowadays the resistance and propulsion model tests of inland waterway vessels are carried out rarely because of relatively high costs. On the other hand, the degree of development of computational methods enables’ to estimate the reliable values o interaction coefficients. The computations referred to in the present paper were carried out using the authors’ own software HPSDKS and the commercial software Ansys Fluent.

  6. ANTIOXIDANT ACTIVITY IN NAKED AND HULLED OAT (AVENA SATIVA L. VARIETIES

    Directory of Open Access Journals (Sweden)

    Daniela Chmelová

    2015-02-01

    Full Text Available The aim of this study was determine suitable conditions for antioxidant extraction from different oat (Avena sativa L. varieties, specifically naked oat (Tatran, and yellow (Atego, black (Paddock and white (Fredy hulled oats. Antioxidant activity was determined by radical-scavenging activity on 2,2-diphenyl-1-picrylhydrazyl (DPPH free radical. The results showed that methanol reported the highest recovery of antioxidant compounds in range from 150 to 228 μg/g plant material. The highest antioxidant activities were measured in naked oat Tatran (228 μg/g plant material and black hulled oat Paddock (202 μg/g plant material. We achieved higher yields of antioxidant activities by increasing the solid-liquid ratio (w/v (229 – 303 μg/g plant material. Extraction time was 240 minutes for maximal antioxidant activities in all oat varieties.

  7. Design of high-speed planing hulls for the improvement of resistance and seakeeping performance

    Directory of Open Access Journals (Sweden)

    Dong Jin Kim

    2013-03-01

    Full Text Available High-speed vessels require good resistance and seakeeping performance for safe operations in rough seas. The resistance and seakeeping performance of high-speed vessels varies significantly depending on their hull forms. In this study, three planing hulls that have almost the same displacement and principal dimension are designed and the hydrodynamic characteristics of those hulls are estimated by high-speed model tests. All model ships are deep-V type planing hulls. The bows of no.2 and no.3 model ships are designed to be advantageous for wave-piercing in rough water. No. 2 and no. 3 model ships have concave and straight forebody cross-sections, respectively. And length-to-beam ratios of no.2 and no.3 models are larger than that of no.1 model. In calm water tests, running attitude and resistance of model ships are measured at various speeds. And motion tests in regular waves are performed to measure the heave and pitch motion responses of the model ships. The required power of no.1 (VPS model is smallest, but its vertical motion amplitudes in waves are the largest. No.2 (VWC model shows the smallest motion amplitudes in waves, but needs the greatest power at high speed. The resistance and seakeeping performance of no.3 (VWS model ship are the middle of three model ships, respectively. And in regular waves, no.1 model ship experiences ‘fly over’ phenomena around its resonant frequency. Vertical accelerations at specific locations such as F.P., center of gravity of model ships are measured at their resonant frequency. It is necessary to measure accelerations by accelerometers or other devices in model tests for the accurate prediction of vertical accelerations in real ships.

  8. Characterization and Mineralization Rates of Low Temperature Peanut Hull and Pine Chip Biochars

    OpenAIRE

    Harris, Keith; Gaskin, Julia; Cabrera, Miguel; Miller, William; Das, K.C.

    2013-01-01

    Biochar can potentially increase soil fertility and sequester carbon by incorporating nutrients and stable black carbon into the soil; however its effect on soil nitrogen (N) and carbon (C) processes is not well understood. A defined methodology to characterize biochar is necessary to predict how specific biochars will affect C and N mineralization. We amended a Tifton soil (Fine-loamy, siliceous, thermic Plinthic Kandiudults) with peanut hull (Arachis hypogaea; PH; 2.1% N) and pine chip (Pin...

  9. Carbonized rice hull as substratum to produce tamboril-da-mata and garapeira seedlings

    OpenAIRE

    Huezer Viganô Sperandio; Waldir Nagel Schirmer; Marcos Vinicius Winckler Caldeira; Fabio Luiz Fleig Saidelles

    2009-01-01

    The production of forest seedlings, in quantity and quality, is one of the most important steps for the establishment of good stands with native species. Therefore, the substrate is the factor that makes a significant influence in the development of seedlings and many materials can be used in its original composition or combined. This work focus on evaluating the influence of carbonized rice hull as substrate for the production of seedlings of Enterolobium contortisiliquum (Vell.) Morong) and...

  10. Effect of alum (top-dressed and mixed) with rice hulls on pH and ...

    African Journals Online (AJOL)

    The aim of the experiment was to evaluate the effects of alum top dressed or mixed with rice hulls as litter management methods on pH and NH3 emissions. A total of 180 broiler chickens were randomly allocated to 12 pens to a density of 0.07 m2/bird for 5 weeks, creating 4 replicates of 3 experimental treatments with 15 ...

  11. The Effect of Material and Side Walls on Hull Deflection during a Blast Event

    Science.gov (United States)

    2017-12-13

    and has a great resistance to corrosion . When aluminum reacts with oxygen, a thin layer of oxide is created and provides corrosion protection .3...made of aluminum rather than steel is the vehicle hull because the same level of protection could be achieved at a lighter weight. A rectangular...the design of military vehicles. Since World War II, rolled homogeneous armor (RHA) steel has been the primary material used to protect main armor

  12. Purified cellulose, soybean hulls and citrus pulp as a source of fiber for weaned piglets

    OpenAIRE

    Leonardo Augusto Fonseca Pascoal; Maria Cristina Thomaz; Pedro Henrique Watanabe; Urbano dos Santos Ruiz; Alessandro Borges Amorim; Everton Daniel; Susana Zaneti da Silva

    2015-01-01

    Dietary fiber is an important component, which has a direct effect on intake, digestion, and absorption of nutrients; and also alters intestinal microbiota and morphology according to solubility. One digestibility trial and one performance experiment were performed to evaluate the effects of sources of fiber in diets for 21 day weaned piglets. The experimental diets used in both trials consisted of a control diet and diets with purified cellulose, soybean hulls or citrus pulp as a main source...

  13. Losses through gases and effluent and nutritional value of Brachiaria decumbens with addition of soybean hulls

    Directory of Open Access Journals (Sweden)

    Carlos Clayton Oliveira Dantas

    2014-05-01

    Full Text Available The objective of this experiment was to evaluate the losses of nutrient through gases and effluents, the nutrient recovery, fermentation parameters and the chemical parameters of silages of Brachiaria decumbens with the addition of soybean hulls, testing five levels of inclusion: 0, 10, 20, 30 and 40% (as is, with five replications per treatment. After the standardization cut of the forage, performed at 5 cm from the soil level, the soil was fertilized with nitrogen and potassium in the form of ammonium sulfate and potassium chloride, respectively, at 60 kg/ha. After 60 days, the grass was cut at 10 cm from the soil and ensiled. Experimental silos with capacity of 10 liters with Bunsen valve were used. Silos had 3 kg of sand conditioned at the bottom for retention of the effluents. The results show that the contents of dry matter, crude protein, acid detergent insoluble fiber and total digestible nutrients presented positive linear behavior with the inclusion of soybean hulls. In the grass silages with addition of soybean hulls, there was greater recovery of dry matter in relation to the control silage, which is a reflection of the negative linear behavior for the values of losses of gases and effluent. There was quadratic behavior in the pH values and negative linear behavior for the ammonia N values and buffering capacity with the inclusion of the additive in the grass silage. Inclusion of soybean hulls is sufficient to improve the fermentation pattern and minimize the losses through gases and effluents, contributing to the nutrient recovery, in addition to promoting overall improvement of the nutritional value of Brachiaria grass silages.

  14. An interpolation method of b-spline surface for hull form design

    Directory of Open Access Journals (Sweden)

    Hyung-Bae Jung

    2010-12-01

    Full Text Available This paper addresses the problem of B-spline surface interpolation of scattered points for a hull form design, which are not arbitrarily scattered, but can be arranged in a series of contours permitting variable number of points in the contours. A new approach that allows different parameter value for each point on the same contour has been adopted. The usefulness and quality of the interpolation has been demonstrated with some experimental results.

  15. Efficiency measurement with a non-convex free disposal hull technology

    DEFF Research Database (Denmark)

    Fukuyama, Hirofumi; Hougaard, Jens Leth; Sekitani, Kazuyuki

    2016-01-01

    We investigate the basic monotonicity properties of least-distance (in)efficiency measures on the class of non-convex FDH (free disposable hull) technologies. We show that any known FDH least-distance measure violates strong monotonicity over the strongly (Pareto-Koopmans) efficient frontier....... Taking this result into account, we develop a new class of FDH least-distance measures that satisfy strong monotonicity and show that the developed (in)efficiency measurement framework has a natural profit interpretation....

  16. Design of a High Speed Planing Hull with a Cambered Step and Surface Piercing Hydrofoils

    Science.gov (United States)

    2014-06-01

    than 15 degrees to achieve the best results. The Model 5631 Dynaplane design addresses the extension of Clement’s design with respect to a 20...specific applications. In our very high speed Dynaplane configuration, the SPSC hydrofoils designed by Dr. Brizzolara proved to be the best option. 43...Adapted from original code written by Greg Mitchell and Clint Lawler % for use in the Resistance Module for the Planing Hull Analysis and

  17. Visual hull method for tomographic PIV measurement of flow around moving objects

    Energy Technology Data Exchange (ETDEWEB)

    Adhikari, D.; Longmire, E.K. [University of Minnesota, Department of Aerospace Engineering and Mechanics, Minneapolis, MN (United States)

    2012-10-15

    Tomographic particle image velocimetry (PIV) is a recently developed method to measure three components of velocity within a volumetric space. We present a visual hull technique that automates identification and masking of discrete objects within the measurement volume, and we apply existing tomographic PIV reconstruction software to measure the velocity surrounding the objects. The technique is demonstrated by considering flow around falling bodies of different shape with Reynolds number {proportional_to}1,000. Acquired image sets are processed using separate routines to reconstruct both the volumetric mask around the object and the surrounding tracer particles. After particle reconstruction, the reconstructed object mask is used to remove any ghost particles that otherwise appear within the object volume. Velocity vectors corresponding with fluid motion can then be determined up to the boundary of the visual hull without being contaminated or affected by the neighboring object velocity. Although the visual hull method is not meant for precise tracking of objects, the reconstructed object volumes nevertheless can be used to estimate the object location and orientation at each time step. (orig.)

  18. Visual hull method for tomographic PIV measurement of flow around moving objects

    Science.gov (United States)

    Adhikari, D.; Longmire, E. K.

    2012-10-01

    Tomographic particle image velocimetry (PIV) is a recently developed method to measure three components of velocity within a volumetric space. We present a visual hull technique that automates identification and masking of discrete objects within the measurement volume, and we apply existing tomographic PIV reconstruction software to measure the velocity surrounding the objects. The technique is demonstrated by considering flow around falling bodies of different shape with Reynolds number ~1,000. Acquired image sets are processed using separate routines to reconstruct both the volumetric mask around the object and the surrounding tracer particles. After particle reconstruction, the reconstructed object mask is used to remove any ghost particles that otherwise appear within the object volume. Velocity vectors corresponding with fluid motion can then be determined up to the boundary of the visual hull without being contaminated or affected by the neighboring object velocity. Although the visual hull method is not meant for precise tracking of objects, the reconstructed object volumes nevertheless can be used to estimate the object location and orientation at each time step.

  19. GOLD HULL AND INTERNODE2 encodes a primarily multifunctional cinnamyl-alcohol dehydrogenase in rice.

    Science.gov (United States)

    Zhang, Kewei; Qian, Qian; Huang, Zejun; Wang, Yiqin; Li, Ming; Hong, Lilan; Zeng, Dali; Gu, Minghong; Chu, Chengcai; Cheng, Zhukuan

    2006-03-01

    Lignin content and composition are two important agronomic traits for the utilization of agricultural residues. Rice (Oryza sativa) gold hull and internode phenotype is a classical morphological marker trait that has long been applied to breeding and genetics study. In this study, we have cloned the GOLD HULL AND INTERNODE2 (GH2) gene in rice using a map-based cloning approach. The result shows that the gh2 mutant is a lignin-deficient mutant, and GH2 encodes a cinnamyl-alcohol dehydrogenase (CAD). Consistent with this finding, extracts from roots, internodes, hulls, and panicles of the gh2 plants exhibited drastically reduced CAD activity and undetectable sinapyl alcohol dehydrogenase activity. When expressed in Escherichia coli, purified recombinant GH2 was found to exhibit strong catalytic ability toward coniferaldehyde and sinapaldehyde, while the mutant protein gh2 completely lost the corresponding CAD and sinapyl alcohol dehydrogenase activities. Further phenotypic analysis of the gh2 mutant plants revealed that the p-hydroxyphenyl, guaiacyl, and sinapyl monomers were reduced in almost the same ratio compared to the wild type. Our results suggest GH2 acts as a primarily multifunctional CAD to synthesize coniferyl and sinapyl alcohol precursors in rice lignin biosynthesis.

  20. Composition of liquid rice hull smoke and anti-inflammatory effects in mice.

    Science.gov (United States)

    Kim, Sung Phil; Yang, Jun Young; Kang, Mi Young; Park, Jun Cheol; Nam, Seok Hyun; Friedman, Mendel

    2011-05-11

    A new liquid rice hull smoke extract with a smoky aroma and sugar-like odor prepared by pyrolysis of rice hulls followed by liquefaction of the resulting smoke contained 161 compounds characterized by GC/MS. Antioxidative, antiallergic, and anti-inflammatory activities of the extract were assessed in vitro and in vivo. At pH 5, the extract inhibited 1-diphenyl-2-picrylhydrazyl (DPPH) free radicals and suppressed nitric oxide (NO) and β-hexosaminidase releases from lipopolysaccharide (LPS)-induced RAW264.7 mouse macrophage leukemia cells and ionophore A23187-stimulated RBL-2H3 rat basophilic cells without significant cytotoxicity. 12-O-Tetradecanolylphorbol-13-acetate (TPA) was applied to the ears of CD-1 mice to induce inflammation (edema), which was accompanied by increases in a series of biomarkers. Topical application of 1% of the extract as well as feeding mice a standard diet with 1% extract for two weeks significantly reduced the expression of biomarkers associated with the TPA-induced inflammation. These include tumor necrosis factor-α (TNF-α), IL-1β, interleukin-1β (IL-1β), interleukin-6 (IL-6), leukotriene B(4) (LTB(4)), prostaglandin E(2) (PGE(2)), myeloperoxidase (MPO). These in vitro and in vivo findings demonstrate the potential value of rice hull smoke extract derived from a major agricultural byproduct to serve as a new biomaterial for the improvement of food quality and safety and the environment.

  1. GOLD HULL AND INTERNODE2 Encodes a Primarily Multifunctional Cinnamyl-Alcohol Dehydrogenase in Rice1

    Science.gov (United States)

    Zhang, Kewei; Qian, Qian; Huang, Zejun; Wang, Yiqin; Li, Ming; Hong, Lilan; Zeng, Dali; Gu, Minghong; Chu, Chengcai; Cheng, Zhukuan

    2006-01-01

    Lignin content and composition are two important agronomic traits for the utilization of agricultural residues. Rice (Oryza sativa) gold hull and internode phenotype is a classical morphological marker trait that has long been applied to breeding and genetics study. In this study, we have cloned the GOLD HULL AND INTERNODE2 (GH2) gene in rice using a map-based cloning approach. The result shows that the gh2 mutant is a lignin-deficient mutant, and GH2 encodes a cinnamyl-alcohol dehydrogenase (CAD). Consistent with this finding, extracts from roots, internodes, hulls, and panicles of the gh2 plants exhibited drastically reduced CAD activity and undetectable sinapyl alcohol dehydrogenase activity. When expressed in Escherichia coli, purified recombinant GH2 was found to exhibit strong catalytic ability toward coniferaldehyde and sinapaldehyde, while the mutant protein gh2 completely lost the corresponding CAD and sinapyl alcohol dehydrogenase activities. Further phenotypic analysis of the gh2 mutant plants revealed that the p-hydroxyphenyl, guaiacyl, and sinapyl monomers were reduced in almost the same ratio compared to the wild type. Our results suggest GH2 acts as a primarily multifunctional CAD to synthesize coniferyl and sinapyl alcohol precursors in rice lignin biosynthesis. PMID:16443696

  2. Convex hull or crossing avoidance? Solution heuristics in the traveling salesperson problem.

    Science.gov (United States)

    MacGregor, James N; Chronicle, Edward P; Ormerod, Thomas C

    2004-03-01

    Untrained adults appear to have access to cognitive processes that allow them to perform well in the Euclidean version of the traveling salesperson problem (E-TSP). They do so despite the famous computational intractability of the problem, which stems from its combinatorial complexity. A current hypothesis is the humans' good performance is based on following a strategy of connecting boundary points in order (the convex hull hypothesis). Recently, an alternative has been proposed, that performance is governed by a strategy of avoiding crossings. We examined the crossing avoidance hypothesis from the perspectives of its capacity to explain existing data, its theoretical adequacy, and its ability to explain the results of three new experiments. In Experiment 1, effects on the solution quality of number of points versus number of interior points were compared. In Experiment 2, the distributions of observed paths were compared with those predicted from the two hypotheses. In Experiment 3, figural effects were varied to induce crossings. The results of the experiments were more consistent with the convex hull than with the crossing avoidance hypothesis. Despite its simplicity and intuitive appeal, crossing avoidance does not provide a complete alternative to the convex hull hypothesis. Further elucidation of human strategies and heuristics for optimization problems such as the E-TSP will aid our understanding of how cognitive processes have adapted to the demands of combinatorial difficulty.

  3. Countercurrent extraction of soluble sugars from almond hulls and assessment of the bioenergy potential.

    Science.gov (United States)

    Holtman, Kevin M; Offeman, Richard D; Franqui-Villanueva, Diana; Bayati, Andre K; Orts, William J

    2015-03-11

    Almond hulls contain considerable proportions (37% by dry weight) of water-soluble, fermentable sugars (sucrose, glucose, and fructose), which can be extracted for industrial purposes. The maximum optimal solids loading was determined to be 20% for sugar extraction, and the addition of 0.5% (w/v) pectinase aided in maintaining a sufficient free water volume for sugar recovery. A laboratory countercurrent extraction experiment utilizing a 1 h steep followed by three extraction (wash) stages produced a high-concentration (131 g/L fermentable sugar) syrup. Overall, sugar recovery efficiency was 88%. The inner stage washing efficiencies were compatible with solution equilibrium calculations, indicating that efficiency was high. The concentrated sugar syrup was fermented to ethanol at high efficiency (86% conversion), and ethanol concentrations in the broth were 7.4% (v/v). Thin stillage contained 233 g SCOD/L, which was converted to biomethane at an efficiency of 90% with a biomethane potential of 297 mL/g SCODdestroyed. Overall, results suggested that a minima of 49 gal (185 L) ethanol and 75 m(3) methane/t hulls (dry whole hull basis) are achievable.

  4. Bow hull-form optimization in waves of a 66,000 DWT bulk carrier

    Directory of Open Access Journals (Sweden)

    Jin-Won Yu

    2017-09-01

    Full Text Available This paper uses optimization techniques to obtain bow hull form of a 66,000 DWT bulk carrier in calm water and in waves. Parametric modification functions of SAC and section shape of DLWL are used for hull form variation. Multi-objective functions are applied to minimize the wave-making resistance in calm water and added resistance in regular head wave of λ/L = 0.5. WAVIS version 1.3 is used to obtain wave-making resistance. The modified Fujii and Takahashi's formula is applied to obtain the added resistance in short wave. The PSO algorithm is employed for the optimization technique. The resistance and motion characteristics in calm water and regular and irregular head waves of the three hull forms are compared. It has been shown that the optimal brings 13.2% reduction in the wave-making resistance and 13.8% reduction in the added resistance at λ/L = 0.5; and the mean added resistance reduces by 9.5% at sea state 5.

  5. Accelerated Solvent Extraction of Insecticides from Rice Hulls, Rice Bran, and Polished Rice Grains.

    Science.gov (United States)

    Teló, Gustavo Mack; Senseman, Scott Allen; Marchesan, Enio; Camargo, Edinalvo Rabaioli; Carson, Katherine

    2017-03-01

    Analysis of pesticide residues in irrigated rice grains is important for food security. In this study, we analyzed accelerated solvent extraction (ASE) conditions for the extraction of thiamethoxam and chlorantraniliprole insecticides from rice hulls, rice bran, and polished rice grains. Several variables, including extraction solvent, extraction temperature, extraction pressure, cell size, static extraction time, and sample concentration, were investigated. The average recoveries of the three matrixes were between 89.7 and 109.7% at the fortification level of 0.75 mg/kg. The optimum ASE operating conditions were acetonitrile (100%) as extraction solvent, extraction temperature of 75°C for rice hulls and 100°C for rice bran and polished rice grains, extraction cell pressure of 10.3 MPa, 22 mL cell size, and two extraction cycles. The total extraction time was approximately 25 min. The extracted volume was evaporated to dryness and the residues were redissolved in 2 mL acetonitrile after 1 min of vortex-shaking. Thiamethoxam and chlorantraniliprole were analyzed by ultra-HPLC with tandem MS. In conclusion, ASE in rice hulls, rice bran, and polished rice grains offers the possibility of a fast and simple method for obtaining a quantitative extraction of the studied pesticides.

  6. Realistic evaluation of hull performance for rowing shells, canoes, and kayaks in unsteady flow.

    Science.gov (United States)

    Day, Alexander; Campbell, Ian; Clelland, David; Doctors, Lawrence J; Cichowicz, Jakub

    2011-07-01

    In this study, we investigated the effect of hull dynamics in shallow water on the hydrodynamic performance of rowing shells as well as canoes and kayaks. An approach was developed to generate data in a towing tank using a test rig capable of reproducing realistic speed profiles. The impact of unsteady shallow-water effects on wave-making resistance was examined via experimental measurements on a benchmark hull. The data generated were used to explore the validity of a computational approach developed to predict unsteady shallow-water wave resistance. Comparison of measured and predicted results showed that the computational approach correctly predicted complex unsteady wave-resistance phenomena at low oscillation frequency and speed, but that total resistance was substantially under-predicted at moderate oscillation frequency and speed. It was postulated that this discrepancy arose from unsteady viscous effects. This was investigated via hot-film measurements for a full-scale single scull in unsteady flow in both towing-tank and field-trial conditions. Results suggested a strong link between acceleration and turbulence and demonstrated that the measured real-world viscous-flow behaviour could be successfully reproduced in the tank. Thus a suitable tank-test approach could provide a reliable guide to hull performance characterization in unsteady flow.

  7. Wood structure and adhesive bond strength

    Science.gov (United States)

    Charles R. Frihart

    2006-01-01

    Much of the literature on the bonding of wood and other lignocellulosic materials has concentrated on traditional adhesion theories. This has led to misconceptions because wood is a porous material on both the macroscopic and microscopic levels. A better understanding of wood bonding can be developed by investigating the theories of adhesion and bond strength, taking...

  8. Determination of Chemical Composition, Physical Characteristics and Nutritive Value of Treated Walnut Hull by Neurospora Sitophila through Nylon Bag and Gas Production Methods

    Directory of Open Access Journals (Sweden)

    Maasoomeh Takalloozadeh

    2015-01-01

    Full Text Available In this research, chemical composition, gas production characteristics, effective degradability and nutritive value index (NVI of DM and CP by in situ method of treated walnut hull by Nurospora Sitophila were studied. Three fistulated Kermani ram were used for determination of Walnut hull degradability. Data were analysed using completely randomize design. By processing walnut hull with Neurospora Sitophila, water holding capacity and total content of tannin and phenol decreased significantly, while the insoluble ash increased significantly. Processing had no significant effect on degradability parameters and NVI of dry matter and crude protein. Gas production volume in untreated Walnut hull in times 6, 12 and 24 hours increased significantly with comparison to the treated Walnut hull. Generally, processing of walnut hull with Nurospora Sitophila had no significant effect on nutritive value of this feedstuff.

  9. Correlated Strength in the Nuclear Spectral Function

    Energy Technology Data Exchange (ETDEWEB)

    D. Rohe; C. S. Armstrong; R. Asaturyan; O. K. Baker; S. Bueltmann; C. Carasco; D. Day; R. Ent; H. C. Fenker; K. Garrow; A. Gasparian; P. Gueye; M. Hauger; A. Honegger; J. Jourdan; C. E. Keppel; G. Kubon; R. Lindgren; A. Lung; D. J. Mack; J. H. Mitchell; H. Mkrtchyan; D. Mocelj; K. Normand; T. Petitjean; O. Rondon; E. Segbefia; I. Sick; S. Stepanyan; L. Tang; F. Tiefenbacher; W. F. Vulcan; G. Warren; S. A. Wood; L. Yuan; M. Zeier; H. Zhu; B. Zihlmann

    2004-10-01

    We have carried out an (e,ep) experiment at high momentum transfer and in parallel kinematics to measure the strength of the nuclear spectral function S(k,E) at high nucleon momenta k and large removal energies E. This strength is related to the presence of short-range and tensor correlations, and was known hitherto only indirectly and with considerable uncertainty from the lack of strength in the independent-particle region. This experiment locates by direct measurement the correlated strength predicted by theory.

  10. Hulled and hull-less barley grains with the genetic trait for low-phytic acid increased the apparent total-tract digestibility of phosphorus and calcium in diets for young swine.

    Science.gov (United States)

    Veum, T L; Raboy, V

    2016-03-01

    A 35-d experiment was conducted using 63 crossbred pigs (35 barrows and 28 gilts) with an initial average BW of 7.0 kg and age of 28 d to evaluate the efficacy of the low-phytic acid (LPA) genetic trait in hulled or hull-less barley in isocaloric diets. Hulled barleys were the normal barley (NB) cultivar Harrington and the near-isogenic LPA mutant 955 (M955) with P availabilities of 36 and 95%, respectively. Hull-less lines were produced by crossing NB and the LPA mutant 422 line with a hull-less line, producing hull-less NB (HNB) and hull-less mutant 422 (HM422) with P availabilities of 41 and 66%, respectively. Pigs were in individual metabolism cages or pens for Phase 1 (d 0 to 14) and Phase 2 (d 14 to 35). Diets defined as NB, HNB, HM422, or M955 with no added inorganic P (iP) had available P (aP) concentrations of 0.27, 0.28, 0.35, and 0.40% for Phase 1 and 0.15, 0.17, 0.23, and 0.31% for Phase 2, respectively. Only diet M955 was adequate in aP. Therefore, iP was added to the P-deficient diets to make diets NB + iP, HNB + iP, and HM422 + iP with aP equal to that in diet M955. Overall (d 0 to 35), ADG and G:F were greater ( absorbed greater ( + iP that was equal to diet M955 in aP. Therefore, LPA barley, especially M955 with 95% aP, will reduce the use of iP in swine diets, reduce P pollution from swine manure, and support the goal of achieving global P sustainability.

  11. Genetic Control of a Transition from Black to Straw-White Seed Hull in Rice Domestication1[C][W][OA

    Science.gov (United States)

    Zhu, Bo-Feng; Si, Lizhen; Wang, Zixuan; Jingjie Zhu, Yan Zhou; Shangguan, Yingying; Lu, Danfeng; Fan, Danlin; Li, Canyang; Lin, Hongxuan; Qian, Qian; Sang, Tao; Zhou, Bo; Minobe, Yuzo; Han, Bin

    2011-01-01

    The genetic mechanism involved in a transition from the black-colored seed hull of the ancestral wild rice (Oryza rufipogon and Oryza nivara) to the straw-white seed hull of cultivated rice (Oryza sativa) during grain ripening remains unknown. We report that the black hull of O. rufipogon was controlled by the Black hull4 (Bh4) gene, which was fine-mapped to an 8.8-kb region on rice chromosome 4 using a cross between O. rufipogon W1943 (black hull) and O. sativa indica cv Guangluai 4 (straw-white hull). Bh4 encodes an amino acid transporter. A 22-bp deletion within exon 3 of the bh4 variant disrupted the Bh4 function, leading to the straw-white hull in cultivated rice. Transgenic study indicated that Bh4 could restore the black pigment on hulls in cv Guangluai 4 and Kasalath. Bh4 sequence alignment of all taxa with the outgroup Oryza barthii showed that the wild rice maintained comparable levels of nucleotide diversity that were about 70 times higher than those in the cultivated rice. The results from the maximum likelihood Hudson-Kreitman-Aguade test suggested that the significant reduction in nucleotide diversity in rice cultivars could be caused by artificial selection. We propose that the straw-white hull was selected as an important visual phenotype of nonshattered grains during rice domestication. PMID:21263038

  12. Effect of five year storage on total phenolic content and antioxidant capacity of almond (Amygdalus communisL. hull and shell from different genotypes

    Directory of Open Access Journals (Sweden)

    Khadijeh Sadat Moosavi Dolatabadi

    2014-12-01

    Full Text Available Objectives: Almond (Prunus amygdalus hull and shell are agricultural by-products that are a source of phenolic compounds.The processing of almond produce shell and hull, accounts for more than 50% by dry weight of the almond fruits. Recently, more studies have focused on the influence of storage conditions and postharvest handling on the nutritional quality of fruits, especially the antioxidant phenolics. In this study, influence of long-term storage (five years on the total phenolic and antioxidant capacity of almond hull and shell from different genotypes was evaluated. Materials and Methods: The fruits of subjected genotypes were collected and their hull and shell were separated. They were dried and reduced to fine powder. This powder stored at room temperature for five years. The total phenolic content (TPC and bioactivities (antioxidant potential: DPPH and ABTS radical scavenging and reducing power of extracts were evaluated using spectrophotometric methods. Results: It was found that TPC content and bioactivity levels in the stored almond hull and shell were different, compared to the hulls and shells which were evaluated in 2007. S1-4 genotype had the highest TPC and reducing power in its hull and shell.Low correlation coefficient was observed between phenolic content and the DPPH radical scavenging percentage in hull and shell extract. Conclusions: For the first time, results of this investigation showed that storage can influence the antioxidant and antiradical potential of almond hull and shell.

  13. Crystal strength by direct computation

    Science.gov (United States)

    Bulatov, Vasily

    2007-03-01

    The art of making materials stronger goes back to medieval and even ancient times. Swords forged from Damascus steels more than 10 centuries ago possessed a unique combination of hardness and flexibility, two qualities that are difficult to attain simultaneously. The skills of metalworking were based on empirical knowledge and were passed from the master smith to his pupils. The science of physical metallurgy came about only in the XX century bringing with it new methods for finding out why some materials are strong while others are not. Soon it was realized that, when it comes to metal strength, it is all about crystal defects -- impurities, dislocations, grain boundaries, etc. - and how they are organized into crystal microstructure. This understanding has since resulted in new effective methods of material processing aiming to modify crystal microstructure in order to affect material's properties, e.g. strength and/or hardness. Remarkably and disappointingly, general understanding that microstructure defines material's response to external loads has not yet resulted in a workable physical theory of metal strength accounting for the realistic complexity of material microstructure. In this presentation I would like to discuss a few tidbits from computational and experimental research in our group at LLNL on crystal defects and their contributions to material strength. My selection of the examples aims to illustrate the major premise of our work that the mechanisms by which the microstructure affects crystal strength are multiple and complex but that there is hope to bring some order to this complexity.

  14. Rice brans, rice bran oils, and rice hulls: composition, food and industrial uses, and bioactivities in humans, animals, and cells.

    Science.gov (United States)

    Friedman, Mendel

    2013-11-13

    Rice plants produce bioactive rice brans and hulls that have been reported to have numerous health-promoting effects in cells, animals, and humans. The main objective of this review is to consolidate and integrate the widely scattered information on the composition and the antioxidative, anti-inflammatory, and immunostimulating effects of rice brans from different rice cultivars, rice bran oils derived from rice brans, rice hulls, liquid rice hull smoke derived from rice hulls, and some of their bioactive compounds. As part of this effort, this paper also presents brief summaries on the preparation of health-promoting foods including bread, corn flakes, frankfurters, ice cream, noodles, pasta, tortillas, and zero-trans-fat shortening as well as industrial products such bioethanol and biodiesel fuels. Also covered are antibiotic, antiallergic, anticarcinogenic, antidiabetic, cardiovascular, allelochemical, and other beneficial effects and the mechanisms of the bioactivities. The results show that food-compatible and safe formulations with desirable nutritional and biological properties can be used to develop new multifunctional foods as well as bioethanol and biodiesel fuel. The overlapping aspects are expected to contribute to a better understanding of the potential impact of the described health-promoting potential of the rice-derived brans, oils, and hulls in food and medicine. Such an understanding will enhance nutrition and health and benefit the agricultural and industrial economies.

  15. The Application of Rice Hull Mulch and Potassium Nitrate on Growth and Yield of Kailan (Brassica oleraceae var. Long Leaf

    Directory of Open Access Journals (Sweden)

    Sri Ramadiana

    2011-05-01

    Full Text Available Potassium (K is absorbed by plants in larger amounts than any other mineral element except N to optimalize plant growth. Mulches may be influenced an available K at vegetative growth phase of plant. The research was conducted in Simpang Kanan Village, Gisting, Tanggamus Lampung Province. The objectives of this research were to study the application of KNO3 and rice hull mulch on growth and yield of kailan. Fields experiments were arranged by a factorial in a completely randomized block design with 10 treatments and 3 replications. A first factor was (1 dosages of KNO3 (150, 175, 200, 225, and 250 kg ha-1 and the second factor was mulch of the rice hull (with and without the rice hull. The results showed that the application of the rice hull did not significantly affected the yield of kailan, however the application of KNO3 till 250 kg ha-1 increased the level of greenness up to 6.10% and the wide of leaf up to 18,57%. In addition, the present of potassium fertilizer suspended with the rice hull significantly affected the width of kalian leaf.

  16. Kolkhoung (Pistacia khinjuk Hull Oil and Kernel Oil as Antioxidative Vegetable Oils with High Oxidative Stability and Nutritional Value

    Directory of Open Access Journals (Sweden)

    Maryam Asnaashari

    2015-01-01

    Full Text Available In this study, in order to introduce natural antioxidative vegetable oil in food industry, the kolkhoung hull oil and kernel oil were extracted. To evaluate their antioxidant efficiency, gas chromatography analysis of the composition of kolkhoung hull and kernel oil fatty acids and high–performance liquid chromatography analysis of tocopherols were done. Also, the oxidative stability of the oil was considered based on the peroxide value and anisidine value during heating at 100, 110 and 120 °C. Gas chromatography analysis showed that oleic acid was the major fatty acid of both types of oil (hull and kernel and based on a low content of saturated fatty acids, high content of monounsaturated fatty acids, and the ratio of ω-6 and ω-3 polyunsaturated fatty acids, they were nutritionally well-balanced. Moreover, both hull and kernel oil showed high oxidative stability during heating, which can be attributed to high content of tocotrienols. Based on the results, kolkhoung hull oil acted slightly better than its kernel oil. However, both of them can be added to oxidation–sensitive oils to improve their shelf life.

  17. Purified cellulose, soybean hulls and citrus pulp as a source of fiber for weaned piglets

    Directory of Open Access Journals (Sweden)

    Leonardo Augusto Fonseca Pascoal

    2015-10-01

    Full Text Available Dietary fiber is an important component, which has a direct effect on intake, digestion, and absorption of nutrients; and also alters intestinal microbiota and morphology according to solubility. One digestibility trial and one performance experiment were performed to evaluate the effects of sources of fiber in diets for 21 day weaned piglets. The experimental diets used in both trials consisted of a control diet and diets with purified cellulose, soybean hulls or citrus pulp as a main source of dietary fiber. To evaluate the digestibility of nutrients (Assay 1, the total feces and urine collection method was used. The fiber sources did not affect nutrient digestibility, except for soluble fiber, which increased with the inclusion of citrus (Citrus sinensisL. pulp. To evaluate performance, morphophysiology and microbiology of the digestive tract of weaned piglets, a total of 32 castrated male piglets was used. Slaughter of animals was implemented at 35 and 50 days of age. The use of soybean (Glycine max L. hulls and citrus pulp in diets increased the number of goblet cells and the density of villi in the jejunum. The viscosities of stomach and cecum contents increased due to the addition of citrus pulp. Soybean hulls and the citrus pulp included in diets reduced the occurrence of E. coli in the small intestines of piglets slaughtered at 35 days of age. Among the fiber sources, purified cellulose in piglet diets promotes better performance of animals, due to the modulation of the small intestine microbiota, with lower E. coli occurrence resulting in higher villus density.

  18. Turbulence modeling of transverse flow on ship hulls in shallow water

    Energy Technology Data Exchange (ETDEWEB)

    Jakobsen, Ken-Robert Gjelstad

    2010-09-15

    The hydrodynamic forces acting on a ship that travels in restricted water vary greatly with water depth and the geometry of the ship hull. This will affect the ship maneuverability in terms of various flow effects like for instance squat, when the ship is sucked down towards the seabed due to a pressure drop on the hull at forward speed. It is, thus, important to gain detailed knowledge on these aspects of marine engineering. The problem is in the present work addressed through a numerical investigation of turbulent transverse flow on two-dimensional ship sections in shallow water. The numerical code is validated against traditional flow problems in the literature. Namely, the Backward-facing step (BFS) and the Smoothly-contoured ramp (SCR). 2D and 3D laminar flows and 2D low Reynolds number turbulent flows are calculated, and the results are found to be in good agreement with the previous numerical and experimental comparison data. The turbulence model used in the calculations is the one-equation Spalart-Allmaras model. The overall goal of achieving more efficient and accurate numerical schemes will always be in focus of code development. Adaptive mesh refinement (AMR) is then a very helpful tool to save both time for grid generation prior to the calculations in question and the CPU hours needed to solve the governing equations. The latter is even more evident in a parallel environment. These aspects are included in the present investigation as part of the process to adapt and investigate a CFD tool suitable to handle turbulent flows on a ship hull in shallow water. Several physical and numerical parameters are included in the present study and the Plackett-Burman screening design is utilized to efficiently analyze the results. With the latter method, a simple function for calculating the drag force on a two-dimensional ship section as function of the given parameters has been obtained. (Author)

  19. Microstructure development of chars derived from high-temperature pyrolysis of barley (Hordeum vulgare L.) hulls

    Energy Technology Data Exchange (ETDEWEB)

    A.A. Boateng; P.H. Cooke; K.B. Hicks [US Department of Agriculture, Wyndmoor, PA (United States). Agriculture Research Service, Eastern Regional Research Center

    2007-03-15

    Fast pyrolysis of biomass is a thermochemical conversion process that provides an economic production of pyrolysis oils/bio-oils. The process also results in a residual solid residue, char, that comprises carbon and mineral ash that can be a potential source of fuel or a valuable co-product. Depending on the exposure time and temperature, pyrolysis can increase the interfacial surface areas of the residual char thereby enhancing its absorptive capacity. Char residues can be used for physical or chemical absorption and as catalyst support or base material for fertilizers. The reactions that occur during char combustion or gasification are heterogeneous hence the reaction rates are microstructure dependent. Ashes from biomass derived chars can be high either in calcium or silica with the latter exceeding 90% levels in certain grain hull residues. Depending on the microstructural transformations which occur during thermal degradation of the biomass, silica-laden ashes can be a potential source of pozzolan for the construction industry. In this study, the microstructure of the chars derived from fast pyrolysis of barley-hull was studied using environmental scanning electron microscopy under low vacuum conditions. The results indicate a gradual increase in convoluted microstructure related to the superficial organization of epidermal cells, including stomata and trichomes that eventually assume the form of various morphotypes of phytoliths. Characterization of the temporal events of high temperature evolution of the hull microstructure provides practical implications of its combustion reactivities and also provides information useful for predicting potential masonry applications for the resulting ash. 18 refs., 8 figs., 3 tabs.

  20. Instrument for determining the transuranic element content of chopped leached fuel hulls and other materials

    Energy Technology Data Exchange (ETDEWEB)

    Brodzinski, R. L.; Wogman, N. A.; Nielson, H. L.; Brown, D. P.

    1979-07-01

    An instrument has been designed, constructed, and evaluated for the identification and quantitative determination of transuranic elements by detection of neutrons emitted from their (..cap alpha.., n) and spontaneous fission reactions. Although optimized for batch evaluation of chopped leached nuclear fuel cladding hulls, the principle can be adapted to continuous feed operations. Unique electronic circuitry permits the sorting of neutron emissions depending on their origin which can be directly related to the isotopic composition of very small amounts of transuranic activities present in extreme gamma radiation fields. Efficiencies, sensitivities, and detection limits are discussed.

  1. An Analysis of Wind Power Development in the Town of Hull, MA

    Energy Technology Data Exchange (ETDEWEB)

    Adams, Christopher

    2013-06-30

    Over the past three decades the Town of Hull, MA has solidified its place in U.S. wind energy history through its leadership in community-based generation. This is illustrated by its commissioning of the first commercial-scale wind turbine on the Atlantic coastline, the first suburban-sited turbine in the continental United States, pursuit of community-based offshore wind, and its push toward creating an energy independent community. The town's history and demographics are briefly outlined, followed by experience in projects to provide wind power, including pre-construction and feasibility efforts, financial aspects, and market/industry factors.

  2. In situ degradation of almond (Prunus dulcis L.) hulls, a potential feed material for ruminants

    OpenAIRE

    JAFARI, SAEID; Alizadeh, Alireza; IMNI, ALI; Meng, Goh Yong; Rajion, Mohamed Ali; EBRAHIMI, Mahdi

    2015-01-01

    The nutritive values of almond hulls (Ahs), alfalfa (ALF), and sugar beet pulp (SBP) were determined using the in situ nylon bag technique. The ruminal dry matter (DM) degradation kinetics of 4 varieties of Ahs were compared with ALF and SBP. The almond varieties tested were Rabbi (RAB), Mamaii (MAM), Shahrud 15 (SH15), and Shokufe (SH). Samples were incubated in triplicate at 0, 4, 8, 12, 16, 24, 48, 72, and 96 h in 3 rumen-fistulated steers. The average total degradability fraction (TDF) of...

  3. The Thermal Cracking Experiment Research of Tar from Rice Hull Gasification for Power Generation

    Science.gov (United States)

    Wu, Z. S.; Mi, T.; We, Q. X.; Chen, Y. F.; Li, X. H.

    the tar from rice hull gasification for power generation which is cracked in high temperature is studied in this paper, the results reveal the part of compositions which have smaller RT in tar is first cracked into H2, CO2 and carbon, and then carbon react with H2 and CO2, and CH4, CO are formed; the cracked efficiency of tar can reach 28.66%, the carbon deposit among cracked tar can reach 12.76%, the results of the GC-MS analysis showed the aromatic extent of with tar cracking reaction carrying out in high temperature.

  4. STUDY ON THE ENERGY NUTRITION VALUES OF HULL-LESS BARLEY IN EXPERIMENTS WITH MUSCOVY DUCKS

    Directory of Open Access Journals (Sweden)

    Dimo PENKOV

    2004-10-01

    Full Text Available Using adapted methods for balanced experiments with waterfowl, the apparent (AMEn-0 and the true (TMEn-0 metabolizable energy of hull-less barley have been established. Despite the lower content of crude fi ber, the energy values were similar to the common barley (Hordeum sativa L.. The AMEn-0 and the TMEn-0 of the forage for Muscovy ducks were 12.29 MJ/kg DM and 13.28 MJ/kg DM, and the coeffi cients of the gross energy transformation - 68.97 and 74.52, respectively.

  5. Convex hull and tour crossings in the Euclidean traveling salesperson problem: implications for human performance studies.

    Science.gov (United States)

    Van Rooij, Iris; Stege, Ulrike; Schactman, Alissa

    2003-03-01

    Recently there has been growing interest among psychologists in human performance on the Euclidean traveling salesperson problem (E-TSP). A debate has been initiated on what strategy people use in solving visually presented E-TSP instances. The most prominent hypothesis is the convex-hull hypothesis, originally proposed by MacGregor and Ormerod (1996). We argue that, in the literature so far, there is no evidence for this hypothesis. Alternatively we propose and motivate the hypothesis that people aim at avoiding crossings.

  6. The Effect of Rise Angle of V-Hull Non Ballast Ship on Seakeeping Performance

    Directory of Open Access Journals (Sweden)

    Elkady Hesham

    2015-01-01

    Full Text Available In this paper a new concept in ship design was used to be alternative of ballast water system, to emerge that remedy the introduction of invasive marine species and the disadvantages of ballast water treatment systems. Thus, the hydrodynamic influences due to hull line variation of this kind of ships were studied, using the invariant cross-section area curve under the design draft to change the rise angle at bottom. Then numerical calculation was used to get the seakeeping at each angle. Two 3D models were constructed for 59000 DWT oil tankers and 35000 DWT bulk carriers, where the result of the bulk carrier was exposed.

  7. Characterization of fly ash, slag and glass hull for the obtaining of vitreous materials

    Science.gov (United States)

    Ayala Valderrama, D. M.; Gómez Cuaspud, J. A.

    2017-12-01

    This article presents the structural and thermal characterization of fly ash, the waste from blast furnace slag and the glass hull, generated as common residues in industry, which cannot be recycled easily or destroyed in a simple and fast way. In the particular case of fly ash, at present are being used as a lightweight aggregate in the production of cement, concrete and additive in the production of glass and glass ceramics. As far as the slag and hull, are being used as additives for the asphalt and concretes, however its use still is restricted, reason why its use in alternative ways are necessary. Initially the chemical composition of residues was established, determining that the fly ashes contains SiO2, Al2O3 and Fe2O3 oxides; 90% of the total composition, was confirmed by X-ray diffraction analysis. As minor constituents, small percentages of Mg, P, S, K, Na and Ti were found. For the slag case, the phases of Fe3O4, Ca3Mg (SiO2)4 and Ca(MgAl)(Si,Al)2O6 were identified, observing the presence of amorphous phase higher than 94% of the total phase of the system. Meanwhile, the glass hull sample showed a higher percentage of 95% amorphicity, mainly identifying a weak signal associated with silicon oxide SiO2. The thermal analyses of the samples, exhibit a decrease in mass for samples between 25-1000°C was observed, which can be attributed to different physical-chemical events that occur in the materials. The heat flow for each sample is related with the removal of the water retained by the physisorption processes around 92-110°C in all cases. With this previous characterization of the precursors, a sample was composed using 70% fly ash, 10% slag and 20% of glass hull was composed and treated at 1200°C/1.5 hours, obtaining a dense black glassy material for potential applications in field of the glass ceramics.

  8. MAO-A inhibitory activity of quercetin from Calluna vulgaris (L.) Hull

    DEFF Research Database (Denmark)

    Saaby, Lasse; Rasmussen, Hasse Bonde; Jäger, Anna Katharina

    2009-01-01

    AIM OF THE STUDY: This study investigated MAO-A inhibitory activity of methanol extract of Calluna vulgaris (L.) Hull., which traditionally has been used as a nerve calming remedy. MATERIALS AND METHODS: A methanolic extract of Calluna vulgaris was partitioned against heptane, ethyl acetate...... and water. The three fractions were tested in a photometric peroxidase linked MAO-A bioassay. The ethyl acetate phase showed the highest MAO-A inhibitory activity. Quercetin was isolated by VLC through bioassay-guided fractionation and purified by re-crystallisation. The structure was elucidated by LC...

  9. Separation and HPLC-MS identification of phenolic antioxidants from agricultural residues: Almond hulls and grape pomace

    DEFF Research Database (Denmark)

    Rubilar, M.; Pinelo, Manuel; Shene, C.

    2007-01-01

    Almond hulls and grape pomace are residues abundantly generated by agricultural industries, which could be processed to obtain bioactive products. To this purpose, crude ethanol extracts from both agricultural byproducts were attained and subsequently fractionated in order to obtain an organic....../water fraction (FOW). Extracts and fractions were analyzed for antioxidant power and their phenolic components tentatively identified by HPLC-MS. Chromatographic peaks of almond hull extracts showed the occurrence of hydroxybenzoic and cinnamic acid derivatives, with minor presence of flavan-3-ols (ECG, EGCG...... was assessed by DPPH and TBARS assays. Almond hulls showed inhibition percentages lower than 50% in both assays, while the inhibition percentage ranged from 80% to 90% in pomace extracts. Red grape pomace extract was the most efficient antioxidant, with an EC50 value of 0.91 g/L for TBARS and 0.20 g/L for DPPH...

  10. Effect of corn- and soybean hull-based creep feed and backgrounding diets on lifelong performance and carcass traits of calves from pasture and rangeland conditions

    Science.gov (United States)

    Three separate studies were conducted to investigate the life-long effect of creep feeding, creep feeding energy source (soybean hulls, SC, or corn, CC) and interactive effects of creep feed with backgrounding dietary energy source (soybean hulls, SBR, or corn, CBR) on calf growth performance, carca...

  11. Fermentation of oat and soybean hull hydrolysates into ethanol and xylitol by recombinant industrial strains of Saccharomyces cerevisiae under diverse oxygen environments

    Science.gov (United States)

    In this study, we evaluated the capacity of recombinant industrial Saccharomyces cerevisiae YRH 396 and YRH 400 strains to ferment sugars from oat hull and soybean hull hydrolysates into ethanol and xylitol. The strains were genetically modified by chromosomal integration of Pichia stipitis XYLI/XYL...

  12. Characteristics and treatment of wastewater generated during underwater hull cleaning operations of U.S. Navy ships

    OpenAIRE

    Forbes, Donna J.

    1996-01-01

    For the last 15 years the U.S Navy has been using an underwater diver-operated brush mechanism to clean marine fouling on ship hulls. During this operation, it has been shown that 1 to 2 mils of antifouling paint (which is 40-50 percent cuprous oxide by weight) are removed, resulting in the discharge of up to 1300 pounds of copper into the surrounding surface waters. This paper reviewed and summarized the recent studies which have been conducted relating to hull cleaning. Among other things, ...

  13. Economic and Environmental Impact Trade-Offs Related to In-Water Hull Cleanings of Merchant Vessels

    DEFF Research Database (Denmark)

    Pagoropoulos, Aris; Kjær, Louise Laumann; Dong, Yan

    2017-01-01

    they are an established practice, their associated environmental and economic trade-offs and conflicts have remained largely unexplored. The purpose of this article is to quantitatively assess both economic and environmental impacts of hull management schemes on the operation of tanker vessels. After identifying induced...... and avoided costs and environmental impacts from the hull management system, we used both temporally and spatially distributed models to capture the degradation of the antifouling system as well as the global sailing profile of the vessels. Last, we analyzed how each of the modeled impacts varied...

  14. Soybean hulls as a primary ingredient in forage-free diets for limit-fed growing cattle.

    Science.gov (United States)

    Löest, C A; Titgemeyer, E C; Drouillard, J S; Blasi, D A; Bindel, D J

    2001-03-01

    In Exp. 1, 300 heifers (260 kg initial BW) were used to compare growth performance of cattle fed forage-free diets containing predominantly soybean hulls with that of cattle receiving roughage- and corn-based diets and to determine whether cattle fed soybean hull-based diets would respond to supplementation with methionine hydroxy analogue (MHA), lipid-coated betaine, or concentrated separator by-product (CSB; a source of betaine). Treatments included 1) a roughage-based diet fed at 2.75% of BW, 2) a corn-based diet fed at 1.5% of BW, 3) a corn-based diet fed at 2.25% of BW, 4) a soybean hull-based diet fed at 1.5% of BW (SH1.5), 5) a soybean hull-based diet fed at 2.25% of BW (SH2.25), 6) SH1.5 top-dressed with 11.4 g/d Alimet (10 g/d MHA), 7) SH2.25 top-dressed with 11.4 g/d Alimet, 8) SH2.25 top-dressed with 7 g/d of a lipid-coated betaine product (4.2 g/d betaine), and 9) SH2.25 top-dressed with 250 g/d CSB (15.5 g/d betaine). Supplemental MHA, betaine, and CSB did not change DMI, ADG, or gain:feed ratio for cattle fed soybean hulls. Heifers fed soybean hull-based diets gained 29% slower (P < 0.05) and had 27% lower gain:feed ratios than heifers fed the corn-based diets. Cattle fed soybean hull-based diets had gains that were lower (P < 0.05) than those of cattle fed the roughage-based diets, but gain:feed ratios were similar because cattle were fed less of the soybean hull-based diets. Roughage-fed cattle had similar gains but 25% lower (P < 0.05) gain:feed ratios than cattle fed the corn-based diets. In Exp. 2, degradation by ruminal microbes of betaine in anhydrous betaine, betaine-HCl, feed-grade betaine, lipid-coated betaine, and CSB was evaluated in vitro using ruminal inocula collected from steers fed a high-grain or high-roughage diet. The roughage diet led to less betaine disappearance than the grain diet. More betaine was degraded from CSB than from other sources, perhaps because sugars provided by CSB stimulated fermentation, but no large differences

  15. Hydrodynamic Tests in the N.A.C.A. Tank of a Model of the Hull of the Short Calcutta Flying Boat

    Science.gov (United States)

    Ward, Kenneth E

    1937-01-01

    The hydrodynamic characteristics of a model of the hull of the Short Calcutta (N.A.C.A. Model 47) are presented in non-dimensional form. This model represents one of a series of hulls of successful foreign and domestic flying boats the characteristics of which are being obtained under similar test conditions in the N.A.C.A. tank. The take-off distance and time for a flying boat having the hull of the Calcutta are compared at two values of the gross load with the corresponding distances and times for the same flying boat having hulls of two representative American types, the Sikorsky S-40 and the N.A.C.A. 11-A. This comparison indicates that for hulls of the widely different forms compared, the differences in take-off time and distance are negligible.

  16. Comparing double string theory actions

    Energy Technology Data Exchange (ETDEWEB)

    De Angelis, L. [Dipartimento di Fisica, Università degli Studi “Federico II” di Napoli,Complesso Universitario Monte S. Angelo ed. 6, via Cintia, 80126 Napoli (Italy); Gionti, S.J.G. [Specola Vaticana, Vatican City, V-00120, Vatican City State and Vatican Observatory Research Group, Steward Observatory, The University Of Arizona, 933 North Cherry Avenue, Tucson, Arizona 85721 (United States); Marotta, R.; Pezzella, F. [Istituto Nazionale di Fisica Nucleare, Sezione di Napoli,Complesso Universitario di Monte S. Angelo ed. 6, via Cintia, 80126 Napoli (Italy)

    2014-04-28

    Aimed to a deeper comprehension of a manifestly T-dual invariant formulation of string theory, in this paper a detailed comparison between the non-covariant action proposed by Tseytlin and the covariant one proposed by Hull is done. These are obtained by making both the string coordinates and their duals explicitly appear, on the same footing, in the world-sheet action, so “doubling” the string coordinates along the compact dimensions. After a discussion on the nature of the constraints in both the models and the relative quantization, it results that the string coordinates and their duals behave like “non-commuting” phase space coordinates but their expressions in terms of Fourier modes generate the oscillator algebra of the standard bosonic string. A proof of the equivalence of the two formulations is given. Furthermore, open-string solutions are also discussed.

  17. Genetic variability of hull-less barley accessions based on molecular and quantitative data

    Directory of Open Access Journals (Sweden)

    Ricardo Meneses Sayd

    2015-02-01

    Full Text Available The objective of this work was to characterize and quantify the genetic, molecular, and agronomic variability of hull-less barley genotypes, for the selection of parents and identification of genotypes adapted to the irrigated production system in the Brazilian Cerrado. Eighteen hull-less barley accessions were evaluated, and three covered barley accessions served as reference. The characterization was based on 157 RAPD molecular markers and ten agronomic traits. Genetic distance matrices were obtained based on molecular markers and quantitative traits. Graphic grouping and dispersion analyses were performed. Genetic, molecular, and agronomic variability was high among genotypes. Ethiopian accessions were genetically more similar, and the Brazilian ones were genetically more distant. For agronomic traits, two more consistent groupings were obtained, one with the most two-rowed materials, and the other with six-rowed materials. The more diverging materials were the two-rowed CI 13453, CN Cerrado 5, CN Cerrado 1, and CN Cerrado 2. The PI 356466, CN Cerrado 1, PI 370799, and CI 13453 genotypes show agronomic traits of interest and, as genetically different genotypes, they are indicated for crossing, in breeding programs.

  18. The use of rice hulls for sustainable control of NOx emissions in deep space missions

    Energy Technology Data Exchange (ETDEWEB)

    Xu, X.H.; Shi, Y.; Chang, S.G.; Fisher, J.W.; Pisharody, S.; Moran, M.J.; Wignarajah, K.

    2001-12-21

    The use of the activated carbon produced from rice hulls to control NOx emissions for the future deep space missions has been demonstrated. The optimal carbonization temperature range was found to be between 600 C and 750 C. The burnoff of 61.8% was found at 700 C in pyrolysis and 750 C in activation. The BET surface area of the activated carbon from rice hulls was determined to be 172 m{sup 2}/g when prepared at 700 C. The presence of oxygen in flue gas is essential for effective adsorption of NO by the activated carbon. On the contrary, water vapor inhibits the adsorption efficiency of NO. Consequently, water vapor in flue gas should be removed by drying agents before adsorption to ensure high NO adsorption efficiency. All of NO in the flue gas was removed for more than one and a half hours when 10% oxygen was present and using a ratio of the carbon weight to the flue gas flow rate (W/F) of 15.4 g-min/L. The reduction of the adsorbed NO to form N{sub 2} can be effectively accomplished under anaerobic conditions at 550 C. For NO saturated activated carbon, the loss of carbon mass was determined to be about 0.16% of the activated carbon per cycle of regeneration. The reduction of the adsorbed NO also regenerates the activated carbon. The regenerated activated carbon exhibits improved NO adsorption efficiency.

  19. Dietary Fiber Extraction from Defatted Corn Hull by Hot-Compressed Water

    Directory of Open Access Journals (Sweden)

    Wang Li

    2018-06-01

    Full Text Available Corn hulls were abundant and inexpensive byproducts of the corn dry or wet milling processes, but most of them were discarded as agro-wastes. The aim of this study was to extract the dietary fiber by hot-compressed water (HCW from defatted corn hull and to determine the chemical properties. Results showed that temperature and time played critical roles in extraction efficiency; the maximal yield of dietary fiber A (DFA extracted by HCW reached 33.0% at 150°C for 60 min. The yield of dietary fiber B (DFB increased from 2.0% to 56.9% as the temperature increased from 110 to 180°C, while the yield of solid residue (SR decreased from 88.7% to 27.7%. Fourier transform infrared spectroscopy (FT-IR results demonstrated that C-H, O-H, C=O, COO- occurred in the DFA, SR and DFB. The dietary fiber polysaccharides consisted of arabinose, galactose, glucose, xylose and uronic acid.

  20. Heterosis for hull number and seed yield per plant in oil rape (Brassica napus L.

    Directory of Open Access Journals (Sweden)

    Marjanović-Jeromela Ana

    2000-01-01

    Full Text Available Heterosis for hull number and seed yield per plant was studied in the hybrid combinations of the F, genera­tion obtained by diallel-crossing five cultivars of winter oil rape. A trial with the parental lines and F, hybrids was established at the Rimski Šančevi Experiment Field of the Institute of Field and Vegetable Crops in Novi Sad. The materials were hand-sown according to a randomized block design with three replications. The size of samples used to analyze the two traits was 33 plants per treatment (parents and F1 hybrids. The level of heterosis was calculated relative to the parental mean (according to the formula H1=F1/(P1+P2/2 x l00 and relative to the better parent (according to the formula H2=F1/BPxl00. Heterosis for hull number was found m a number of combinations. The largest heterosis value relative to the parental mean was recorded in the combination Jet Neuf x Banaćanka (67.78%, while heterosis relative to the better parent ranged from -20.22 to 48.52%. Heterosis for seed yield per plant were high and positive in most of the combinations, except for Sremica x Banaćanka. The values ranged between 17.61 and 159 68% relative to the parental mean and between 3.40 and 149.00% relative to the better parent. .

  1. Molecular Characterization of Arabinoxylans from Hull-Less Barley Milling Fractions

    Directory of Open Access Journals (Sweden)

    Xiaoxi Wang

    2011-03-01

    Full Text Available Arabinoxylans were prepared from different hull-less barley milling fractions (bran, shorts and flour. The yields of hull-less bran arabinoxylan (HBB-AX, shorts arabinoxylan (HBS-AX and flour arabinoxylan (HBF-AX were 8.42%, 4.08% and 2.13% respectively. Sugar composition analysis showed that arabinose and xylose were the main sugars. HBF-AX had the highest Ara/Xyl ratio, followed by HBS-AX and HBB-AX. Size exclusion chromatography analysis (HPSEC showed that HBF-AX had the highest molecular weight, followed by HBS-AX and HBB-AX, which had the lowest molecular weight. Aqueous solutions of HBB-AX, HBS-AX and HBF-AX had higher molecular weight(Mw than in 0.5 mol/L NaOH and 1.0 mol/L NaOH. Dynamic light scattering analysis (DLS showed that HBB-AX, HBS-AX and HBF-AX had existed in two states in distilled water, 0.5 mol/LNaOH, 1.0 mol/L NaOH, and DMSO/H2O (90/10, an unaggregated state and an aggregated state, with the latter predominating.

  2. Removal of Neutral Red from aqueous solution by adsorption on spent cottonseed hull substrate

    Energy Technology Data Exchange (ETDEWEB)

    Zhou Qi [School of Resources and Environmental Engineering, Wuhan University of Technology, Luoshi Road 122, Wuhan, Hubei 430070 (China); Gong Wenqi, E-mail: gongwenqi@yahoo.com.cn [School of Resources and Environmental Engineering, Wuhan University of Technology, Luoshi Road 122, Wuhan, Hubei 430070 (China); Xie Chuanxin [SINOPEC Research Institute of Safety Engineering, Qingdao 266071 (China); Yang Dongjiang [Environmental Futures Centre and Griffith School of Environment, Gold Coast Campus, Griffith University, QLD 4222 (Australia); Ling Xiaoqing; Yuan Xiao; Chen Shaohua [School of Resources and Environmental Engineering, Wuhan University of Technology, Luoshi Road 122, Wuhan, Hubei 430070 (China); Liu Xiaofang [School of Chemical Engineering, Wuhan University of Technology, Wuhan 430070 (China)

    2011-01-15

    Cottonseed hull, a low-cost widely available agricultural waste in China, after used as substrate for the white rot fungus Pleurotus ostreatus cultivation, was tested for the removal of Neutral Red (NR), a cationic dye, from aqueous solution. A batch adsorption study was carried out with varied solution pH, adsorbent dosage, reaction time and initial NR concentration. The results show that the kinetics of dye removal by the spent cottonseed hull substrate (SCHS) is prompt in the first 5 min and the adsorption equilibrium can be attained after 240 min. The biosorption kinetics and equilibrium follow typical pseudo-second-order and Langmuir adsorption models. Thermodynamic parameters of {Delta}G{sup o}, {Delta}H{sup o} and {Delta}S{sup o} show that the adsorption is a spontaneous and endothermic process. Fourier transform infrared (FTIR) spectroscopy was used for the characterization of possible dye-biosorbent interaction. This study provides a facile method to produce low-cost biosorbent for the purification of dye contaminated water.

  3. CROWDED HYBRID PANEL MANUFACTURED WITH PEANUT HULLS REINFORCED WITH ITAÚBA WOOD PARTICLES

    Directory of Open Access Journals (Sweden)

    Guilherme Barbirato

    2014-09-01

    Full Text Available http://dx.doi.org/10.5902/1980509815726In this paper, it was considered the study of the potential use of peanut hulls and wood particles of itaúba (Mezilaurus itauba species in order to add value to these materials through the manufacture of hybrid particle board in order to compare the physical and mechanical performances as well as durability. For these procedures, it was used the bi-component polyurethane resin based on castor beans (mammon oil and urea-formaldehyde. The product quality was evaluated based on the requirements of the standards NBR 14.810:2006 APA PRP and 108, through physico-mechanical and microstructural durability. The results indicate that the incorporation of wood particles warrants an increase in physical-mechanical properties of the particleboard manufactured with peanut hulls, the polyurethane resin based on castor oil was effective as a particle adhesive binder and the durability assay indicated that the material should be used under conditions of low exposure to moisture.

  4. Fatty acid synthase inhibitors from the hulls of Nephelium lappaceum L.

    Science.gov (United States)

    Zhao, You-Xing; Liang, Wen-Juan; Fan, Hui-Jin; Ma, Qing-Yun; Tian, Wei-Xi; Dai, Hao-Fu; Jiang, He-Zhong; Li, Ning; Ma, Xiao-Feng

    2011-08-16

    Natural products inhibiting fatty acid synthase (FAS) are appearing as potential therapeutic agents to treat cancer and obesity. The bioassay-guided chemical investigation of the hulls of Nephelium lappaceum L. resulted in the isolation of ten compounds (1-10) mainly including flavonoids and oleane-type triterpene oligoglycosides, in which all of the compounds were isolated from this plant for the first time. Additionally, compounds 8 and 9 were new hederagenin derivatives and were elucidated as hederagenin 3-O-(2,3-di-O-acetyl-α-l-arabinofuranosyl)-(1→3)-[α-l-rhamnopyranosyl(1→2)]-β-l-arabinopyranoside and hederagenin 3-O-(3-O-acetyl-α-l-arabinofuranosyl)-(1→3)-[α-l-rhamnopyranosyl-(1→2)]-β-l-arabinopyranoside, respectively. All these isolates were evaluated for inhibitory activities of FAS, which showed these isolates had inhibitory activity against FAS with IC(50) values ranging from 6.69 to 204.40 μM, comparable to the known FAS inhibitor EGCG (IC(50)=51.97 μM). The study indicates that the hulls of Nephelium lappaceum L. could be considered as potential sources of promising FAS inhibitors and the oleane-type triterpene oligoglycosides could be considered as another type of natural FAS inhibitors. Copyright © 2011 Elsevier Ltd. All rights reserved.

  5. Biofilm community structure and the associated drag penalties of a groomed fouling release ship hull coating.

    Science.gov (United States)

    Hunsucker, Kelli Z; Vora, Gary J; Hunsucker, J Travis; Gardner, Harrison; Leary, Dagmar H; Kim, Seongwon; Lin, Baochuan; Swain, Geoffrey

    2018-02-01

    Grooming is a proactive method to keep a ship's hull free of fouling. This approach uses a frequent and gentle wiping of the hull surface to prevent the recruitment of fouling organisms. A study was designed to compare the community composition and the drag associated with biofilms formed on a groomed and ungroomed fouling release coating. The groomed biofilms were dominated by members of the Gammaproteobacteria and Alphaproteobacteria as well the diatoms Navicula, Gomphonemopsis, Cocconeis, and Amphora. Ungroomed biofilms were characterized by Phyllobacteriaceae, Xenococcaceae, Rhodobacteraceae, and the pennate diatoms Cyclophora, Cocconeis, and Amphora. The drag forces associated with a groomed biofilm (0.75 ± 0.09 N) were significantly less than the ungroomed biofilm (1.09 ± 0.06 N). Knowledge gained from this study has helped the design of additional testing which will improve grooming tool design, minimizing the growth of biofilms and thus lowering the frictional drag forces associated with groomed surfaces.

  6. Analysis of the Almond Harvesting and Hulling Mechanization Process: A Case Study

    Directory of Open Access Journals (Sweden)

    Simone Pascuzzi

    2017-12-01

    Full Text Available The aim of this paper is the analysis of the almond harvesting system with a very high level of mechanization frequently used in Apulia for the almond harvesting and hulling process. Several tests were carried out to assess the technical aspects related to the machinery and to the mechanized harvesting system used itself, highlighting their usefulness, limits, and compatibility within the almond cultivation sector. Almonds were very easily separated from the tree, and this circumstance considerably improved the mechanical harvesting operation efficiency even if the total time was mainly affected by the time required to manoeuvre the machine and by the following manual tree beating. The mechanical pick-up from the ground was not effective, with only 30% of the dropped almond collected, which mainly was caused by both the pick-up reel of the machine being unable to approach the almonds dropped near the base of the trunk and the surface condition of the soil being unsuitably arranged for a mechanized pick-up operation. The work times concerning the hulling and screening processes, carried out at the farm, were heavily affected by several manual operations before, during, and after the executed process; nevertheless, the plant work capability varied from 170 to 200 kg/h with two operators.

  7. The p-Wave Strength Function

    OpenAIRE

    Izumi, FURUOYA; Department of Physics, Hosei University

    1982-01-01

    The effect of the intermediate structure, the doorway state, on the overall aspect of the p-wave strength function plotted with respect to mass number is investigated. Our qualitative method is analogous to that used by Block and Feshbach in their investigation on the s-wave strength function. It is shown that low values in the p-wave strength function near A=50 and A=160 can be explained by our theory. In particular it is found that the change of the number of doorway states contributing to ...

  8. A modular theory of learning and performance

    National Research Council Canada - National Science Library

    Guilhardi, Paulo; Yi, Linlin; Church, Russell M

    2007-01-01

    ...). This modular theory is a development of packet theory (Kirkpatrick, 2002; Kirkpatrick & Church, 2003) that adds a distinction between pattern and strength memories, as well as contributing closed-form equations...

  9. An analytical method to assess the damage and predict the residual strength of a ship in a shoal grounding accident scenario

    Directory of Open Access Journals (Sweden)

    Sun Bin

    2016-04-01

    Full Text Available In this paper, a simplified analytical method used to predict the residual ultimate strength of a ship hull after a shoal grounding accident is proposed. Shoal grounding accidents always lead to severe denting, though not tearing, of the ship bottom structure, which may threaten the global hull girder resistance and result in even worse consequences, such as hull collapse. Here, the degree of damage of the bottom structure is predicted by a series of analytical methods based on the plastic-elastic deformation mechanism. The energy dissipation of a ship bottom structure is obtained from individual components to determine the sliding distance of the seabed obstruction. Then, a new approach to assess the residual strength of the damaged ship subjected to shoal grounding is proposed based on the improved Smith's method. This analytical method is verified by comparing the results of the proposed method and those generated by numerical simulation using the software ABAQUS. The proposed analytical method can be used to assess the safety of a ship with a double bottom during its design phase and predict the residual ultimate strength of a ship after a shoal grounding accident occurs.

  10. Strengths-based Learning

    DEFF Research Database (Denmark)

    Ledertoug, Mette Marie

    Strength-based learning - Children͛s Character Strengths as Means to their Learning Potential͛ is a Ph.D.-project aiming to create a strength-based mindset in school settings and at the same time introducing strength-based interventions as specific tools to improve both learning and well......-being. The Ph.D.-project in Strength-based learning took place in a Danish school with 750 pupils age 6-16 and a similar school was functioning as a control group. The presentation will focus on both the aware-explore-apply processes and the practical implications for the schools involved, and on measurable...

  11. Strength Modeling Report

    Science.gov (United States)

    Badler, N. I.; Lee, P.; Wong, S.

    1985-01-01

    Strength modeling is a complex and multi-dimensional issue. There are numerous parameters to the problem of characterizing human strength, most notably: (1) position and orientation of body joints; (2) isometric versus dynamic strength; (3) effector force versus joint torque; (4) instantaneous versus steady force; (5) active force versus reactive force; (6) presence or absence of gravity; (7) body somatotype and composition; (8) body (segment) masses; (9) muscle group envolvement; (10) muscle size; (11) fatigue; and (12) practice (training) or familiarity. In surveying the available literature on strength measurement and modeling an attempt was made to examine as many of these parameters as possible. The conclusions reached at this point toward the feasibility of implementing computationally reasonable human strength models. The assessment of accuracy of any model against a specific individual, however, will probably not be possible on any realistic scale. Taken statistically, strength modeling may be an effective tool for general questions of task feasibility and strength requirements.

  12. HULL INSPECTION PRODUCTIVITY MEASUREMENT FOR A NEW SHIPBUILDING PROJECT (CASE STUDY OF BIC 11.02 A NEW SHIPBUILDING PROJECT

    Directory of Open Access Journals (Sweden)

    Dimas Endro W

    2013-06-01

    Full Text Available Hull construction process for a new shipbuilding project usualy consist of a set of stages. Starting from material identification, marking, cutting fabrication, assembly and testing. For many shipyard hull inspection activity and hull production stages are joined to simplify production progress monitoring. A 20% credit given for inspection activity. Inspection activities particulary for hull construction which consist of inspection and repair work. Schedule slip of a new shipbuilding is very potencial. This condition is met when man power allocation and work priority are not set properly. Therefore, a clear parameter which conduct with inspection productivity to production manager should be provided. This parameter could help production manager to determine priority of repair work. In this case, differences parameter between production that is using pane measurement and inspection that is using compartement measurement. These two different parameter could make difficulties, particulary when production manager want to know how much progess has been done. A new method to converting the two different parameter has become a topic of this paper

  13. Morphological influence of cellulose nanoparticles (CNs) from cottonseed hulls on rheological properties of polyvinyl alcohol/CN suspensions

    Science.gov (United States)

    This work aims to extract and characterize fibrous, rod-like and spherical cellulose nanoparticles (CNs) from cottonseed hull and to investigate the structure-morphology-rheology relationships. The rheological behavior of poly(vinyl alcohol) (PVA)/CNs suspensions was also examined to guide the solve...

  14. Dynamic Planar Convex Hull with Optimal Query Time and O(log n · log log n ) Update Time

    DEFF Research Database (Denmark)

    Brodal, Gerth Stølting; Jakob, Riko

    2000-01-01

    The dynamic maintenance of the convex hull of a set of points in the plane is one of the most important problems in computational geometry. We present a data structure supporting point insertions in amortized O(log n · log log log n) time, point deletions in amortized O(log n · log log n) time, a...

  15. Toward free-surface modeling of planing vessels: simulation of the Fridsma hull using ALE-VMS

    Science.gov (United States)

    Akkerman, I.; Dunaway, J.; Kvandal, J.; Spinks, J.; Bazilevs, Y.

    2012-12-01

    In this paper we focus on a class of applications involving surface vessels moving at high speeds, or "planing". We introduce a Fridsma planing hull benchmark problem, and simulate it using the finite-element-based ALE-VMS (Bazilevs et al. in Math Models Methods Appl Sci 2012; Takizawa et al. in Arch Comput Methods Eng 19: 171-225, 2012) approach. The major reasons for selecting this problem is the relative simplicity of the hull geometry and the existence of high-quality experimental data used for the purposes of validation. The ALE-VMS approach is formulated in the context of the Mixed Interface-Tracking/Interface-Capturing Technique (MITICT) (Tezduyar in Arch Comput Methods Eng 8:83-130, 2001; Akin et al. in Comput Fluids 36:2-11, 2007; Cruchaga et al. in Int J Numer Methods Fluids 54:1021-1031, 2007), where the level set technique is used for capturing the air-water interface, and the Arbitrary Lagrangian Eulerian (ALE) method is employed to track the interface between the fluid and structure. In this work, the planing hull structure is treated as a six-degree-of-freedom rigid object. The computational results obtained for the Fridsma hull, which include convergence of the trim angle and drag under mesh refinement, match well with the experimental data.

  16. Anti-diabetic effects of rice hull smoke extract on glucose-regulating mechanism in type 2 diabetic mice

    Science.gov (United States)

    The aim of this study is to determine the protective effect of a liquid rice hull smoke extract (RHSE) against type 2 diabetes induced by a high fat diet administered to mice. Dietary administration of 0.5% or 1% RHSE for 7 weeks results in significantly reduced blood glucose and triglyceride and to...

  17. Investigation of weldments in Victoria-class submarine pressure-hull using magnetic flux leakage and Barkhausen noise

    Science.gov (United States)

    Samimi, A. A.; Babbar, V.; Krause, T. W.; Clapham, L.

    2014-02-01

    Evaluation of the stress state within submarine hulls can contribute to risk assessments, which provide assurance that in-service induced stresses will not adversely affect the service life of the naval structure. The purpose of this study was to evaluate the feasibility of using magnetic NDE techniques for identification of stresses associated with weldments in two original pressure hulls of Canada's Victoria class submarines. Magnetic Flux Leakage (MFL) and flux-controlled Barkhausen Noise measurements were investigated for identification of patch boundaries and welds in two sections of Victoria-class submarine-hull steel. While MFL showed clear demarcation of weld boundaries, Barkhausen measurements did not provide sufficiently clear response to identify these features in submarine hull samples. For a better understanding of Barkhausen response, uniaxial tensile stress was investigated on separate samples of submarine steel. A nonlinear dependence of Barkhausen response was observed, with a weaker sensitivity to tensile stresses below 200 MPa. This behavior, combined with the presence of substantial surface compressive stresses, was used to explain the observed insensitivity of Barkhausen measurements to the presence of welds.

  18. 46 CFR 71.50-15 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

    Science.gov (United States)

    2010-10-01

    ... hull examination. If the vessel is already participating in the program or if a remotely operated vehicle (ROV) is used during the program, the preliminary exam step may be omitted. Once you complete... underwater survey portion of the examination process, you may receive credit for a period of time such that...

  19. 46 CFR 71.50-27 - Alternative Hull Examination (AHE) program options: Divers or underwater remotely operated...

    Science.gov (United States)

    2010-10-01

    ...: Divers or underwater remotely operated vehicle (ROV). 71.50-27 Section 71.50-27 Shipping COAST GUARD...-27 Alternative Hull Examination (AHE) program options: Divers or underwater remotely operated vehicle.... (b) You may use an underwater ROV to conduct the underwater survey. The underwater ROV operating team...

  20. 46 CFR 115.620 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

    Science.gov (United States)

    2010-10-01

    ... hull examination. If the vessel is already participating in the program or if a remotely operated vehicle (ROV) is used during the program, the preliminary exam step may be omitted. Once you complete... underwater survey portion of the examination process, you may receive credit for a period of time such that...

  1. Effects of faba bean and faba bean hulls on expression of selected genes in the small intestine of piglets

    NARCIS (Netherlands)

    Jansman, A.J.M.; Baal, van J.; Meulen, van der J.; Smits, M.A.

    2012-01-01

    In a small intestinal segment perfusion (SISP) study in pigs, effects were studied of intestinal perfusion of ground faba beans (Vicia faba), faba bean hulls, or saline on intestinal net fluid absorption in intestinal segments either challenged or not with an enterotoxigenic Escherichia coli (ETEC).

  2. The cost calculus model for the hull roughness; Um modelo para calculo do custo da rugosidade do casco

    Energy Technology Data Exchange (ETDEWEB)

    Marco, Antonino Di [International Paint (Akzo Nobel Ltda.), Sao Paulo, SP (Brazil)

    2004-07-01

    The economic importance of the condition of the immersed hull cannot be underestimated; any increase of the roughness may result in a significant increase in the operational costs of a ship. There are two main types of roughness, biological and physical, each one with its proper characteristics of macro and micro roughness; when an increase in the roughness of the underwater hull occurs, the frictional resistance of the ship or .drag. also increases, resulting in additional power and consequent increase of the fuel consumption to keep the speed of the ship. Keeping the power constant will result in lower speed and greater voyage times. Aiming the better understanding of the effect of the roughness in the performance, costs and operational efficiency of a ship, International Paint developed a new model called 'Hull Roughness Penalty Calculator', a program that predicts the increase of the hull roughness during in service time specified service and combines it with the fouling risk associated with different types of antifoulings. The model compares fuel consumptions and costs of different types of TBT free antifoulings to derive the potential benefit, and also can be used to compare the emissions of carbon dioxide and sulphur oxides. (author)

  3. Effect of Calcereous Cow Horn and Storage on the Physicochemical Properties of Cement-Bonded Particleboards from Groundnut Hulls

    Directory of Open Access Journals (Sweden)

    Ogunkunle Olaoluwa Ayobami

    2013-01-01

    Full Text Available Fine particles of the groundnut hull and cow horn samples were prepared and subjected to hydration experiments with Portland cement with the moisture content maintained around 12%. All the compatibility factor values were very well above 60% making the different combinations appropriate for particleboard production. Metal analyses suggested high concentrations of Ca in both samples with values of  wt% and  wt% for the cow horn and groundnut hull samples, respectively. Potassium was also present in high concentrations but was lower than that of calcium. The cow horn was found to be a good substitute for the synthetic additives. Combinations of with the cow horn gave better compatibility ( between the groundnut hull particles and the Portland cement due to chelation, with the hot-water-treated samples being the best. Bond formation was established through the hydroxyl (–OH, carbonyl (C=O, esters or ethers (C–O, and amide (N–H functional groups on the groundnut hall samples. Storage over a period of time also gave a better compatibility of the groundnut hull sample with cement even in the absence of hot-water pretreatments and chemical additives.

  4. Optimum Position of Acoustic Emission Sensors for Ship Hull Structural Health Monitoring Based on Deep Machine Learning

    DEFF Research Database (Denmark)

    Kappatos, Vassilios; Karvelis, Petros; Georgoulas, George

    2018-01-01

    In this paper a method for the estimation of the optimum sensor positions for acoustic emission localization on ship hull structures is presented. The optimum sensor positions are treated as a classification (localization) problem based on a deep learning paradigm. In order to avoid complex...

  5. Perceptions of the users of urine diversion dry (UDD) toilets in medium density mixed housing in Hull Street, Kimberley

    CSIR Research Space (South Africa)

    Matsebe, GN

    2011-12-01

    Full Text Available urine diversion dry (UDD) toilet. The latter provides a reasonable solution to the current sanitation challenge. This study explores the perceptions of the users of the UDD toilets installed in the medium density mixed housing development of Hull Street...

  6. Embryonic origins of hull cells in the flatworm Macrostomum lignano through cell lineage analysis : developmental and phylogenetic implications

    NARCIS (Netherlands)

    Willems, Maxime; Egger, Bernhard; Wolff, Carsten; Mouton, Stijn; Houthoofd, Wouter; Fonderie, Pamela; Couvreur, Marjolein; Artois, Tom; Borgonie, Gaetan

    The development of macrostomid flatworms is of interest for evolutionary developmental biology research because these taxa combine characteristics of the canonical spiral cleavage pattern with significant deviations from this pattern. One such deviation is the formation of hull cells, which surround

  7. Differential Proteomic Analysis Using iTRAQ Reveals Alterations in Hull Development in Rice (Oryza sativa L..

    Directory of Open Access Journals (Sweden)

    Shuzhen Wang

    Full Text Available Rice hull, the outer cover of the rice grain, determines grain shape and size. Changes in the rice hull proteome in different growth stages may reflect the underlying mechanisms involved in grain development. To better understand these changes, isobaric tags for relative and absolute quantitative (iTRAQ MS/MS was used to detect statistically significant changes in the rice hull proteome in the booting, flowering, and milk-ripe growth stages. Differentially expressed proteins were analyzed to predict their potential functions during development. Gene ontology (GO terms and pathways were used to evaluate the biological mechanisms involved in rice hull at the three growth stages. In total, 5,268 proteins were detected and characterized, of which 563 were differentially expressed across the development stages. The results showed that the flowering and milk-ripe stage proteomes were more similar to each other (r=0.61 than either was to the booting stage proteome. A GO enrichment analysis of the differentially expressed proteins was used to predict their roles during rice hull development. The potential functions of 25 significantly differentially expressed proteins were used to evaluate their possible roles at various growth stages. Among these proteins, an unannotated protein (Q7X8A1 was found to be overexpressed especially in the flowering stage, while a putative uncharacterized protein (B8BF94 and an aldehyde dehydrogenase (Q9FPK6 were overexpressed only in the milk-ripe stage. Pathways regulated by differentially expressed proteins were also analyzed. Magnesium-protoporphyrin IX monomethyl ester [oxidative] cyclase (Q9SDJ2, and two magnesium-chelatase subunits, ChlD (Q6ATS0, and ChlI (Q53RM0, were associated with chlorophyll biosynthesis at different developmental stages. The expression of Q9SDJ2 in the flowering and milk-ripe stages was validated by qRT-PCR. The 25 candidate proteins may be pivotal markers for controlling rice hull development

  8. Use of Bacillus subtilis isolates from Tua-nao towards nutritional improvement of soya bean hull for monogastric feed application.

    Science.gov (United States)

    Wongputtisin, P; Khanongnuch, C; Kongbuntad, W; Niamsup, P; Lumyong, S; Sarkar, P K

    2014-09-01

    Soya bean hull (SBH) is a cheap and high-fibre content feed ingredient that obtained after soya bean oil extraction. Microbial fermentation was expected to improve SBH qualities before applying to animals, especially monogastric animals. Two bacterial strains, Bacillus subtilis MR10 and TK8 that were isolated from Tua-nao, a traditional fermented soya bean in northern Thailand, were used for fermented soya bean hull (FSBH) production. Both could easily grow at 37°C in SBH as the sole substrate. MR10 produced the highest β-mannanase activity (400 U g(-1) SBH) on day 2, while TK8 produced the highest cellulase activity (14·5 U g(-1) SBH) on day 3. After fermentation, the nutritional quality of SBH was obviously improved by an increase in soluble sugars, soluble proteins, crude protein and crude lipid, and a decrease in the content of raffinose family oligosaccharides. Scavenging activity (%) of SBH against ABTS radical cation was also increased from 14 to 27 and 20% by MR10 and TK8 fermentation, respectively. According to the GRAS property of these both strains and various improvements of nutritional values, the fermented SBH proved to be a potential feed ingredient, especially for the monogastric animals. Normally, soya bean hull has been recognized as only a worthless by-product from soya bean oil production process because of its low utilizable nutrients. Our study introduced an alternative way to utilize this worthless residue using biotechnological knowledge. The nutritional quality of soya bean hull was improved by microbial fermentation. Fermented soya bean hull can be used as a cheap, safe and high-nutrient feed ingredient for livestock production, especially monogastric animals, to promote their growth performances, instead of using antibiotics in some regions of the world. © 2014 The Society for Applied Microbiology.

  9. Aerodynamic Characteristics of a Flying-Boat Hull Having a Length-Beam Ratio of 15, TED No. NACA 2206

    Science.gov (United States)

    Riebe, John M.; Naeseth, Rodger L.

    1951-01-01

    An investigation was made in the Langley 300 MPH 7- by 10-foot tunnel to determine the aerodynamic characteristics of a flying-boat hull of a length-beam ratio of 15 in the presence of a wing. The investigation was an extension of previous tests made on hulls of length-beam ratios of 6, 9, and 12; these hulls were designed to have approximately the same hydrodynamic performance with respect to spray and resistance characteristics. Comparison with the previous investigation at lower length-beam ratios indicated a reduction in minimum drag coefficients of 0.0006 (10 peroent)with fixed transition when the length-beam ratio was extended from 12 to 15. As with the hulls of lower length-beam ratio, the drag reduction with a length-beam ratio of 15 occurred throughout the range of angle of attack tested and the angle of attack for minimum drag was in the range from 2deg to 3deg. Increasing the length-beam ratio from 12 to 15 reduced the hull longitudinal instability by an mount corresponding to an aerodynamic-center shift of about 1/2 percent of the mean aerodynamic chord of the hypothetical flying boat. At an angle of attack of 2deg, the value of the variation of yawing-moment coefficient with angle of yaw for a length-beam ratio of 15 was 0.00144, which was 0.00007 larger than the value for a length-beam ratio of 12.

  10. OPTIMISATION OF COMPRESSIVE STRENGTH OF PERIWINKLE ...

    African Journals Online (AJOL)

    In this paper, a regression model is developed to predict and optimise the compressive strength of periwinkle shell aggregate concrete using Scheffe's regression theory. The results obtained from the derived regression model agreed favourably with the experimental data. The model was tested for adequacy using a student ...

  11. Removal of Remazol brilliant violet textile dye by adsorption using rice hulls

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Geyse Adriana Correa; Silva, Domingos Sergio Araujo; Santos, Clayane Carvalho dos; Bezerra, Cicero Wellington Brito; Tanaka, Auro Atsushi; Santana, Sirlane Aparecida Abreu, E-mail: cwb.bezerra@ufma.br [Universidade Federal do Maranhao, (UFMA), Sao Luis (Brazil); Vieira, Adriana Pires [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil)

    2017-01-15

    The release of industrial effluents into the environment causes widespread contamination of aquatic systems. Adsorption is seen as one of the most promising treatment processes, and lignocellulosic materials have gained prominence as adsorbents. This study investigates the potential of rice hulls, either in natura or treated with nitric acid, as adsorbents for removal of the dye. The adsorbents were characterized by infrared spectroscopy, solid state {sup 13}C-NMR, thermogravimetric analysis, and pH at point of zero charge. The dye adsorption experiments were carried out in batch mode, using different experimental conditions. The kinetic adsorption data could be fitted using the model of Elovich. The Freundlich model provided the best fit to the isothermal data. The thermodynamic parameters confirmed the spontaneity of the adsorption process. These adsorbents offer an alternative for dye removal, with advantages including biomass availability and low cost. (author)

  12. The effect of vessel speed on the survivorship of biofouling organisms at different hull locations.

    Science.gov (United States)

    Coutts, Ashley D M; Piola, Richard F; Taylor, Michael D; Hewitt, Chad L; Gardner, Jonathan P A

    2010-07-01

    This study used a specially designed MAGPLATE system to quantify the en route survivorship and post-voyage recovery of biofouling assemblages subjected to short voyages (bow, amidships and stern) was also examined. While no significant differences were evident in en route survivorship of biofouling organisms amongst hull locations, biofouling cover and richness were markedly reduced on faster vessels relative to slower craft. Therefore, the potential inoculum size of non-indigenous marine species and richness is likely to be reduced for vessels that travel at faster speeds (> 14 knots), which is likely to also reduce the chances of successful introductions. Despite this, the magnitude of introductions from biofouling on fast vessels can be considered minor, especially for species richness where 90% of source-port species were recorded at destinations.

  13. Quality and storability of chicken nuggets formulated with green banana and soybean hulls flours.

    Science.gov (United States)

    Kumar, Vinay; Biswas, Ashim Kumar; Sahoo, Jhari; Chatli, Manish Kumar; Sivakumar, S

    2013-12-01

    The present study was envisaged to investigate the effect of green banana (GBF) and soybean hulls flours (SHF) on the physicochemical characteristics, colour, texture and storage stability of chicken meat nuggets. The addition of GBF and SHF in the nugget formulations was effective in sustaining desired cooking yield and emulsion stability besides nutritional benefits. Protein and fat contents were decreased (p > 0.05), but fibers and ash contents was increased (p  0.05%) than control and treatments. Lipid oxidation products, however, unaffected (p > 0.05) but increased in all samples over storage time. Flour treatments showed a positive impact in respect to microbiological quality, however, sensory evaluation indicated comparable scores for all attributes at all times. So, incorporation of GBF and SHF in the formulation could improve the quality and storage stability of chicken nuggets.

  14. Unraveling intermittent features in single-particle trajectories by a local convex hull method

    Science.gov (United States)

    Lanoiselée, Yann; Grebenkov, Denis S.

    2017-08-01

    We propose a model-free method to detect change points between distinct phases in a single random trajectory of an intermittent stochastic process. The local convex hull (LCH) is constructed for each trajectory point, while its geometric properties (e.g., the diameter or the volume) are used as discriminators between phases. The efficiency of the LCH method is validated for six models of intermittent motion, including Brownian motion with different diffusivities or drifts, fractional Brownian motion with different Hurst exponents, and surface-mediated diffusion. We discuss potential applications of the method for detection of active and passive phases in the intracellular transport, temporal trapping or binding of diffusing molecules, alternating bulk and surface diffusion, run and tumble (or search) phases in the motion of bacteria and foraging animals, and instantaneous firing rates in neurons.

  15. Drag resistance measurements for newly applied antifouling coatings and welding seams on ship hull surface

    DEFF Research Database (Denmark)

    Wang, Xueting; Olsen, S. M.; Andres, E.

    in their newly applied conditions. The effects of water absorption of newly applied antifouling coatings on frictional resistance were measured. A flexible rotor with artificial welding seams on its periphery has been designed and constructed to estimate the influence of welding seams on drag resistance. Both......Drag resistances of newly applied antifouling coatings and welding seams on ship hull surface have been investigated using a pilot-scale rotary setup. Both conventional biocide-based antifouling (AF) coatings and silicone-based fouling release (FR) coatings have been studied and compared...... the density of welding seams (number per 5 m ship side) and the height of welding seams had a significant effect on drag resistance....

  16. Numerical simulation of hull curved plate forming by electromagnetic force assisted line heating

    Science.gov (United States)

    Wang, Ji; Wang, Shun; Liu, Yujun; Li, Rui; Liu, xiao

    2017-11-01

    Line heating is a common method in shipyards for forming of hull curved plate. The aluminum alloy plate is widely used in shipbuilding. To solve the problem of thick aluminum alloy plate forming with complex curved surface, a new technology named electromagnetic force assisted line heating(EFALH) was proposed in this paper. The FEM model of EFALH was established and the effect of electromagnetic force assisted forming was verified by self development equipment. Firstly, the solving idea of numerical simulation for EFALH was illustrated. Then, the coupled numerical simulation model of multi physical fields were established. Lastly, the reliability of the numerical simulation model was verified by comparing the experimental data. This paper lays a foundation for solving the forming problems of thick aluminum alloy curved plate in shipbuilding.

  17. Convex hull based neuro-retinal optic cup ellipse optimization in glaucoma diagnosis.

    Science.gov (United States)

    Zhang, Zhuo; Liu, Jiang; Cherian, Neetu Sara; Sun, Ying; Lim, Joo Hwee; Wong, Wing Kee; Tan, Ngan Meng; Lu, Shijian; Li, Huiqi; Wong, Tien Ying

    2009-01-01

    Glaucoma is the second leading cause of blindness. Glaucoma can be diagnosed through measurement of neuro-retinal optic cup-to-disc ratio (CDR). Automatic calculation of optic cup boundary is challenging due to the interweavement of blood vessels with the surrounding tissues around the cup. A Convex Hull based Neuro-Retinal Optic Cup Ellipse Optimization algorithm improves the accuracy of the boundary estimation. The algorithm's effectiveness is demonstrated on 70 clinical patient's data set collected from Singapore Eye Research Institute. The root mean squared error of the new algorithm is 43% better than the ARGALI system which is the state-of-the-art. This further leads to a large clinical evaluation of the algorithm involving 15 thousand patients from Australia and Singapore.

  18. Mean perimeter and mean area of the convex hull over planar random walks

    Science.gov (United States)

    Grebenkov, Denis S.; Lanoiselée, Yann; Majumdar, Satya N.

    2017-10-01

    We investigate the geometric properties of the convex hull over n successive positions of a planar random walk, with a symmetric continuous jump distribution. We derive the large n asymptotic behavior of the mean perimeter. In addition, we compute the mean area for the particular case of isotropic Gaussian jumps. While the leading terms of these asymptotics are universal, the subleading (correction) terms depend on the finer details of the jump distribution and describe a ‘finite size effect’ of discrete-time jump processes, allowing one to accurately compute the mean perimeter and the mean area even for small n, as verified by Monte Carlo simulations. This is particularly valuable for applications dealing with discrete-time jumps processes and ranging from the statistical analysis of single-particle tracking experiments in microbiology to home range estimations in ecology.

  19. Removal of Remazol brilliant violet textile dye by adsorption using rice hulls

    Directory of Open Access Journals (Sweden)

    Geyse Adriana Corrêa Ribeiro

    Full Text Available Abstract The release of industrial effluents into the environment causes widespread contamination of aquatic systems. Adsorption is seen as one of the most promising treatment processes, and lignocellulosic materials have gained prominence as adsorbents. This study investigates the potential of rice hulls, either in natura or treated with nitric acid, as adsorbents for removal of the dye. The adsorbents were characterized by infrared spectroscopy, solid state 13C-NMR, thermogravimetric analysis, and pH at point of zero charge. The dye adsorption experiments were carried out in batch mode, using different experimental conditions. The kinetic adsorption data could be fitted using the model of Elovich. The Freundlich model provided the best fit to the isothermal data. The thermodynamic parameters confirmed the spontaneity of the adsorption process. These adsorbents offer an alternative for dye removal, with advantages including biomass availability and low cost.

  20. Total tin and organotin speciation in historic layers of antifouling paint on leisure boat hulls.

    Science.gov (United States)

    Lagerström, Maria; Strand, Jakob; Eklund, Britta; Ytreberg, Erik

    2017-01-01

    Despite their ban on small vessels in 1989 in the EU, organotin compounds (OTCs) are still being released into the environment due to their presence in historic paint layers on leisure boats. 23 paint samples scraped from recreational boats from three countries around the Baltic Sea were analyzed for total tin (Sn) and OTCs. Two antifouling paint products were also subjected to the same analyses. A new method for the detection of Sn in paint flake samples was developed and found to yield more accurate results compared to four different acid digestion methods. A new method was also developed for the extraction of OTCs from ground paint flakes. This endeavor revealed that existing methods for organotin analysis of sediment may not have full recoveries of OTCs if paint flakes are present in the sample. The hull paint samples had Sn concentrations ranging from 25 to 18,000 mg/kg paint and results showed that tributyltin (TBT) was detected in all samples with concentrations as high as 4.7 g (as Sn)/kg paint. TBT was however not always the major OTC. Triphenyltin (TPhT) was abundant in many samples, especially in those originating from Finland. Several other compounds such as monobutyltin (MBT), dibutyltin (DBT), tetrabutyltin (TeBT), monophenyltin (MPhT) and diphenyltin (DPhT) were also detected. These could be the result of degradation occurring on the hull or of impurities in the paint products as they were also identified in the two analyzed paint products. A linear correlation (r2 = 0.934) was found between the total tin content and the sum of all detected OTCs. The detection of tin can therefore be used to indicate the presence of OTCs on leisure boats. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  1. Dissection of QTLs for Hull Silicon Content on the Short Arm of Rice Chromosome 6

    Directory of Open Access Journals (Sweden)

    Ji-rong WU

    2010-06-01

    Full Text Available The QTL qHUS6 for hull silicon content in rice was previously located on the short arm of rice chromosome 6. By using an F2:3 population segregating in the RM587–RM19784 region harboring qHUS6 in an isogenic background, two QTLs for hull silicon content were detected, of which qHUS6-1 was located in the distal region and qHUS6-2 in the region proximal to the centromere. Three rice plants carrying small heterozygous segments in the target region were selected, of which two covered the qHUS6-1 region and the other covered the qHUS6-2 region. Three F2:3 populations were derived from the selfed seeds of the three plants, respectively. QTL mapping was performed using the two populations segregating in the qHUS6-1 region, and qHUS6-1 was delimited to a 147.0-kb region flanked by the markers RM510 and RM19417. Five groups of F3 lines with different genotypic compositions in the qHUS6-2 region were selected from the other F2:3 population. Two QTLs were separated with two-way ANOVA, of which qHUS6-2a was located in the interval defined by RM19706–RM19795 and qHUS6-2b in the interval RM314–RM19665.

  2. Effect of segregation bands on corrosion of steel plate for ship hull

    Directory of Open Access Journals (Sweden)

    M. Mazur

    2010-07-01

    Full Text Available Despite significant progress in the manufacturing of sheet metal ships carried both by optimizing the chemical compositions of steel mills as well as rolling and heat treatment, it still fails to remove the effects of persistent segregation. As a result we observed anisotropy of mechanical properties of the material which essentially complicates the process of construction for shipbuilding industry. Anisotropy of mechanical properties occurring in sheet metal hull is even more dangerous, that during their work, they are exposed to continuous exposure variable charges arising from sea surface waves. Another factor weakening the resistance to cracking metal ship is sea-water, which in the surface layer is highly aerated and very aggressive corrosion. The purpose of this study is to clarify the role of the segregation bands in the process of corrosion of low alloy steels used for ship hull. It was estimate a rate of corrosion in aerated sea water areas of the metal with or without segregation bands. After corrosion tests were made observations of specimens surfaces. Inside the segregation bands were found phosphorus. The contents of it were exceeded the average this element content in the steel. At the same time areas of the sheet metal with segregation bands were slowly corroded than areas without bands, although the changes of corrosion rate was similar in nature.Corrosion activity of rich in phosphorus segregation band is similar to phosphate corrosion inhibitors. These are effective in the presenceof chloride in seawater to form a protective layer that protects against corrosion segregation band. Under the observation on scanningelectron microscope there was no change in the appearance of surface samples after corrosion tests. A future direction of research will be estimate the stress corrosion in the same species – with and without segregation bands.

  3. Rice hull smoke extract inactivates Salmonella Typhimurium in laboratory media and protects infected mice against mortality.

    Science.gov (United States)

    Kim, Sung Phil; Kang, Mi Young; Park, Jun Cheol; Nam, Seok Hyun; Friedman, Mendel

    2012-01-01

    A previously characterized rice hull smoke extract (RHSE) was tested for bactericidal activity against Salmonella Typhimurium using the disc-diffusion method. The minimum inhibitory concentration (MIC) value of RHSE was 0.822% (v/v). The in vivo antibacterial activity of RHSE (1.0%, v/v) was also examined in a Salmonella-infected Balb/c mouse model. Mice infected with a sublethal dose of the pathogens were administered intraperitoneally a 1.0% solution of RHSE at four 12-h intervals during the 48-h experimental period. The results showed that RHSE inhibited bacterial growth by 59.4%, 51.4%, 39.6%, and 28.3% compared to 78.7%, 64.6%, 59.2%, and 43.2% inhibition with the medicinal antibiotic vancomycin (20 mg/mL). By contrast, 4 consecutive administrations at 12-h intervals elicited the most effective antibacterial effect of 75.0% and 85.5% growth reduction of the bacteria by RHSE and vancomycin, respectively. The combination of RHSE and vancomycin acted synergistically against the pathogen. The inclusion of RHSE (1.0% v/w) as part of a standard mouse diet fed for 2 wk decreased mortality of 10 mice infected with lethal doses of the Salmonella. Photomicrographs of histological changes in liver tissues show that RHSE also protected the liver against Salmonella-induced pathological necrosis lesions. These beneficial results suggest that the RHSE has the potential to complement wood-derived smokes as antimicrobial flavor formulations for application to human foods and animal feeds. The new antimicrobial and anti-inflammatory rice hull derived liquid smoke has the potential to complement widely used wood-derived liquid smokes as an antimicrobial flavor and health-promoting formulation for application to foods. Journal of Food Science © 2011 Institute of Food Technologists® No claim to US original government works.

  4. Effects of adlay hull extracts on uterine contraction and Ca2+ mobilization in the rat.

    Science.gov (United States)

    Hsia, Shih-Min; Kuo, Yueh-Hsiung; Chiang, Wenchang; Wang, Paulus S

    2008-09-01

    Dysmenorrhea is directly related to elevated PGF(2alpha) levels. It is treated with nonsteroid antiinflammatory drugs (NSAIDs) in Western medicine. Since NSAIDs produce many side effects, Chinese medicinal therapy is considered as a feasible alternative medicine. Adlay (Coix lachryma-jobi L. var. ma-yuen Stapf.) has been used as a traditional Chinese medicine for treating dysmenorrhea. However, the relationship between smooth muscle contraction and adlay extracts remains veiled. Therefore, we investigated this relationship in the rat uterus by measuring uterine contraction activity and recording the intrauterine pressure. We studied the in vivo and in vitro effects of the methanolic extracts of adlay hull (AHM) on uterine smooth muscle contraction. The extracts were fractionated using four different solvents: water, 1-butanol, ethyl acetate, and n-hexane; the four respective fractions were AHM-Wa, AHM-Bu, AHM-EA, and AHM-Hex. AHM-EA and its subfractions (175 microg/ml) inhibited uterine contractions induced by PGF(2alpha), the Ca(2+) channel activator Bay K 8644, and high K(+) in a concentration-dependent manner in vitro. AHM-EA also inhibited PGF(2alpha)-induced uterine contractions in vivo; furthermore, 375 microg/ml of AHM-EA inhibited the Ca(2+)-dependent uterine contractions. Thus 375 microg/ml of AHM-EA consistently suppressed the increases in intracellular Ca(2+) concentrations induced by PGF(2alpha) and high K(+). We also demonstrated that naringenin and quercetin are the major pure chemical components of AHM-EA that inhibit PGF(2alpha)-induced uterine contractions. Thus AHM-EA probably inhibited uterine contraction by blocking external Ca(2+) influx, leading to a decrease in intracellular Ca(2+) concentration. Thus adlay hull may be considered as a feasible alternative therapeutic agent for dysmenorrhea.

  5. A markerless motion capture system to study musculoskeletal biomechanics: visual hull and simulated annealing approach.

    Science.gov (United States)

    Corazza, S; Mündermann, L; Chaudhari, A M; Demattio, T; Cobelli, C; Andriacchi, T P

    2006-06-01

    Human motion capture is frequently used to study musculoskeletal biomechanics and clinical problems, as well as to provide realistic animation for the entertainment industry. The most popular technique for human motion capture uses markers placed on the skin, despite some important drawbacks including the impediment to the motion by the presence of skin markers and relative movement between the skin where the markers are placed and the underlying bone. The latter makes it difficult to estimate the motion of the underlying bone, which is the variable of interest for biomechanical and clinical applications. A model-based markerless motion capture system is presented in this study, which does not require the placement of any markers on the subject's body. The described method is based on visual hull reconstruction and an a priori model of the subject. A custom version of adapted fast simulated annealing has been developed to match the model to the visual hull. The tracking capability and a quantitative validation of the method were evaluated in a virtual environment for a complete gait cycle. The obtained mean errors, for an entire gait cycle, for knee and hip flexion are respectively 1.5 degrees (+/-3.9 degrees ) and 2.0 degrees (+/-3.0 degrees ), while for knee and hip adduction they are respectively 2.0 degrees (+/-2.3 degrees ) and 1.1 degrees (+/-1.7 degrees ). Results for the ankle and shoulder joints are also presented. Experimental results captured in a gait laboratory with a real subject are also shown to demonstrate the effectiveness and potential of the presented method in a clinical environment.

  6. Convex integration theory solutions to the h-principle in geometry and topology

    CERN Document Server

    Spring, David

    1998-01-01

    This book provides a comprehensive study of convex integration theory in immersion-theoretic topology. Convex integration theory, developed originally by M. Gromov, provides general topological methods for solving the h-principle for a wide variety of problems in differential geometry and topology, with applications also to PDE theory and to optimal control theory. Though topological in nature, the theory is based on a precise analytical approximation result for higher order derivatives of functions, proved by M. Gromov. This book is the first to present an exacting record and exposition of all of the basic concepts and technical results of convex integration theory in higher order jet spaces, including the theory of iterated convex hull extensions and the theory of relative h-principles. A second feature of the book is its detailed presentation of applications of the general theory to topics in symplectic topology, divergence free vector fields on 3-manifolds, isometric immersions, totally real embeddings, u...

  7. Time-domain Hydroelasticity Theory of Ships Responding to Waves

    DEFF Research Database (Denmark)

    Xia, Jinzhu; Wang, Zhaohui

    1997-01-01

    free surface flow. The general interface boundary condition is used in the mathematical formulation of the fluid motion around the flexible structure. The general time-domain theory is simplified to a slender-body theory for the analysis of wave-induced global responses of monohull ships. The structure...... is represented by a non-uniform beam, while the generalized hydrodynamic coefficients can be obtained from two-dimensional potential flow theory. The linear slender body theory is generalized to treat the non-linear loading effects of rigid motion and structural response of ships travelling in rough seas....... The non-linear hydrostatic restoring force and hydrodynamic momentum action are considered. A numerical solution is presented for the slender body theory. Numerical examples are given for two ship cases with different geometry features, a warship hull and the S175 containership with two different bow...

  8. The strength compass

    DEFF Research Database (Denmark)

    Ledertoug, Mette Marie

    Individual paper presentation: The ‘Strength Compass’. The results of a PhDresearch project among schoolchildren (age 6-16) identifying VIAstrengths concerning age, gender, mother-tongue-langue and possible child psychiatric diagnosis. Strengths-based interventions in schools have a theoretical...... the results for strengths display for children aged 6-16 in different categories: • Different age groups – are the same strengths present in both small children and youths? • Gender – Do the results show differences between the two genders? • Danish as a mother- tongue language. Do the results show any...

  9. Monopole Strength Function of Deformed Superfluid Nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Stoitsov, M. V. [University of Tennessee, Knoxville (UTK) & Oak Ridge National Laboratory (ORNL); Kortelainen, E. M. [University of Tennessee, Knoxville (UTK) & Oak Ridge National Laboratory (ORNL); Nakatsukasa, T. [RIKEN, Japan; Losa, C. [International School for Advanced Studies (SISSA), Trieste, Italy; Nazarewicz, Witold [ORNL

    2011-01-01

    We present an efficient method for calculating strength functions using the finite amplitude method (FAM) for deformed superfluid heavy nuclei within the framework of the nuclear density functional theory. We demonstrate that FAM reproduces strength functions obtained with the fully self-consistent quasi-particle random-phase approximation (QRPA) at a fraction of computational cost. As a demonstration, we compute the isoscalar and isovector monopole strength for strongly deformed configurations in ^{240}Pu by considering huge quasi-particle QRPA spaces. Our approach to FAM, based on Broyden's iterative procedure, opens the possibility for large-scale calculations of strength distributions in well-bound and weakly bound nuclei across the nuclear landscape.

  10. Waltz's Theory of Theory

    DEFF Research Database (Denmark)

    Wæver, Ole

    2009-01-01

    Kenneth N. Waltz's 1979 book, Theory of International Politics, is the most influential in the history of the discipline. It worked its effects to a large extent through raising the bar for what counted as theoretical work, in effect reshaping not only realism but rivals like liberalism and refle......Kenneth N. Waltz's 1979 book, Theory of International Politics, is the most influential in the history of the discipline. It worked its effects to a large extent through raising the bar for what counted as theoretical work, in effect reshaping not only realism but rivals like liberalism...... and reflectivism. Yet, ironically, there has been little attention to Waltz's very explicit and original arguments about the nature of theory. This article explores and explicates Waltz's theory of theory. Central attention is paid to his definition of theory as ‘a picture, mentally formed' and to the radical anti......-empiricism and anti-positivism of his position. Followers and critics alike have treated Waltzian neorealism as if it was at bottom a formal proposition about cause-effect relations. The extreme case of Waltz being so victorious in the discipline, and yet being consistently mis-interpreted on the question of theory...

  11. Anisotropic Concrete Compressive Strength

    DEFF Research Database (Denmark)

    Gustenhoff Hansen, Søren; Jørgensen, Henrik Brøner; Hoang, Linh Cao

    2017-01-01

    When the load carrying capacity of existing concrete structures is (re-)assessed it is often based on compressive strength of cores drilled out from the structure. Existing studies show that the core compressive strength is anisotropic; i.e. it depends on whether the cores are drilled parallel...

  12. Scaling of convex hull volume to body mass in modern primates, non-primate mammals and birds.

    Science.gov (United States)

    Brassey, Charlotte A; Sellers, William I

    2014-01-01

    The volumetric method of 'convex hulling' has recently been put forward as a mass prediction technique for fossil vertebrates. Convex hulling involves the calculation of minimum convex hull volumes (vol(CH)) from the complete mounted skeletons of modern museum specimens, which are subsequently regressed against body mass (Mb) to derive predictive equations for extinct species. The convex hulling technique has recently been applied to estimate body mass in giant sauropods and fossil ratites, however the biomechanical signal contained within vol(CH) has remained unclear. Specifically, when vol(CH) scaling departs from isometry in a group of vertebrates, how might this be interpreted? Here we derive predictive equations for primates, non-primate mammals and birds and compare the scaling behaviour of Mb to volCH between groups. We find predictive equations to be characterised by extremely high correlation coefficients (r(2) = 0.97-0.99) and low mean percentage prediction error (11-20%). Results suggest non-primate mammals scale body mass to volCH isometrically (b = 0.92, 95%CI = 0.85-1.00, p = 0.08). Birds scale body mass to volCH with negative allometry (b = 0.81, 95%CI = 0.70-0.91, p = 0.011) and apparent density (volCH/Mb) therefore decreases with mass (r(2) = 0.36, pprimates scale body mass to vol(CH) with positive allometry (b = 1.07, 95%CI = 1.01-1.12, p = 0.05) and apparent density therefore increases with size (r(2) = 0.46, p = 0.025). We interpret such departures from isometry in the context of the 'missing mass' of soft tissues that are excluded from the convex hulling process. We conclude that the convex hulling technique can be justifiably applied to the fossil record when a large proportion of the skeleton is preserved. However we emphasise the need for future studies to quantify interspecific variation in the distribution of soft tissues such as muscle, integument and body fat.

  13. Strengths of monolingual and bilingual year one primary school pupils

    OpenAIRE

    Jenko, Tamara

    2016-01-01

    The thesis deals with the interrelation between bilingualism and strength of year 1 students. The theoretical part discusses bilingualism, the influences that define it, its strengths and weaknesses. It also includes the definitions of strengths according to Gardner's theory of multiple intelligences. The research study was conducted with an instrument called »Wizard's Castle«, testing 6 children’s strong areas: verbal-linguistic, visual-spatial, logical-mathematical, bodily-kinaesthetic,...

  14. Shear strength of non-shear reinforced concrete elements

    DEFF Research Database (Denmark)

    Hoang, Cao linh

    1997-01-01

    The paper deals with the shear strength of prestressed hollow-core slabs determined by the theory of plasticity. Two failure mechanisms are considered in order to derive the solutions.In the case of sliding failure in a diagonal crack, the shear strength is determined by means of the crack sliding...

  15. Hull-Mounted Acoustic Doppler Current Profiler Data (SADCP) collected aboard the NOAA Ship NANCY FOSTER during cruise NF-10-01 and NF-10-02

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Upper ocean current velocity measurements collected with NOAA Ship NANCY FOSTER's Teledyne RD Instruments 150 kHz hull-mounted acoustic Doppler current profiler...

  16. Tanks Test of a Model of the Hull of the Navy PB-1 Flying Boat - N.A.C.A. Model 52

    Science.gov (United States)

    Allison, John M

    1936-01-01

    A model of the hull of the Navy PB-1 flying boat was tested in the N.A.C.A. tank as part of a program intended to provide information regarding the water performance of hulls of flying boats of earlier design for which hydrodynamic data have heretofore been unavailable. Tests were made according to the general method over the range of practical loadings with the model both fixed in trim and free to trim. A free-to-trim test according to the specific method was also made for the design load and take-off speed corresponding to those of the full-scale flying boat. The resistance obtained from the fixed-trim test was found to be about the same as that of the model of the NC flying-boat hull, and greater at the hump but smaller at high speeds than that of a model of the Sikorsky S-40 flying-boat hull.

  17. Metabolite Variation of Peanut Hulls (Arachis hypogaea L. from Three Locations of Lombok Island on the Basis of GC-MS Analysis

    Directory of Open Access Journals (Sweden)

    Surya Hadi

    2017-09-01

    Full Text Available This article is a part of studies to investigate the potential of natural products from Lombok Island for antidiabetic agents. This study was directed to learn the metabolite variations of peanut hulls collected from three different locations in Lombok Island. The hull samples were extracted in methanol, followed by partition process into three fractions using three solvents with varied polarities (dichloromethane, hexane and acetone. The fractions were then separated and identified for their chemical composition by using GC-MS instrument. Metabolite variations of three extracts showed that the antidiabetic compounds stigmast-5-en-3-ol and oleic acid were found in all three locations with different percentages of abundance. Another antidiabetic compound, linoleic acid, was only identified in peanut hulls from the village of Pringga Jurang (PJ. Besides the antidiabetic compounds, there were other major compounds with known biological activities discussed to find other uses of the hulls.

  18. Hydrogen peroxide modification enhances the ability of biochar (hydrochar) produced from hydrothermal carbonization of peanut hull to remove aqueous heavy metals: Batch and column tests

    Science.gov (United States)

    Experimental and modeling investigations were conducted to examine the effect of hydrogen peroxide treatment on hydrothermally produced biochar (hydrochar) from peanut hull to remove aqueous heavy metals. Characterization measurements showed that hydrogen peroxide modification increased the oxygen-c...

  19. Velocity Data collected from moored Hull-Mounted Acoustic Doppler Current Profilers positioned in Vieques Sound and Virgin Passage in the US Caribbean

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Velocity data were collected from Hull-Mounted Acoustic Doppler Current Profilers moored across Virgin Passage between Culebra, Puerto Rico and St. Thomas, USVI, and...

  20. Study on estimating fluid force acting on a hull during maneuvering movement; Soju undoji no sentai ni sayosuru ryutairyoku no suitei ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Yukawa, K.; Kijima, K. [Kyushu University, Fukuoka (Japan). Faculty of Engineering

    1997-10-01

    With types of general cargo vessel and VLCC vessel as the object of discussion, a method was discussed to estimate fluid force acting theoretically on a hull during maneuvering movement, taking frame line shape into consideration. A vortex model was improved by giving consideration of time-based decay on intensity of discrete vortex lines based on the Rankine vortex. Modeling of flow fields around a hull was attempted to deal with movements in which width and draft are small as compared with the ship length, and turning angle speed and deviation angle are small. It was assumed that the ship speed is slow and effects of waves can be disregarded. Specular images of the hull were taken with regard to free surface, and handled as a double body model. Speed potential to express flow fields around a hull is required to satisfy the following five boundary conditions of Laplace, substance surface, free vortex layers, infinity and exfoliation. The potential may be handled as a two-dimensional problem in a field near the hull by using assumption of a slender and long body and conformal mapping. It was found possible to estimate hull fluid force with relatively good accuracy. Fine linear coefficients derived from the estimation were used to have performed highly accurate determination on course stabilization. 5 refs., 6 figs., 2 tabs.

  1. Effects of oat hulls and wood shavings on digestion in broilers and layers fed diets based on whole or ground wheat.

    Science.gov (United States)

    Hetland, H; Svihus, B; Krogdahl, A

    2003-05-01

    1. An experiment was conducted to study the effects of inclusion of oat hulls in diets based on whole or ground wheat for broilers. Effects of wood shavings on layers were investigated in a further experiment. 2. Inclusion of oat hulls in wheat-based broiler diets did not affect weight gain. Feed conversion efficiency (FCE), corrected for insoluble fibre contents, was improved by oat hull inclusion. 3. Gizzard size increased with inclusion of oat hulls, whole wheat, wood shavings and grit. 4. Starch digestibility was significantly increased by inclusion of oat hulls for broilers, and by wood shavings for layers. 5. Wood shavings and whole wheat did not affect bile acid concentration of gizzard contents. However, the total amount of bile acids in gizzard increased with access to wood shavings due to an increase in the weight of gizzard contents, indicating an increased gastroduodenal reflux. 6. Fibre concentration was considerably higher in the gizzard contents than in the feed. 7. Duodenal particle size decreased with access to grit. No effect of hulls or whole wheat inclusion was found, indicating that all particles are ground to a certain critical size before leaving the gizzard.

  2. An approach to computerized preliminary design procedure of mid-size superyachts from hull modeling to interior space arrangement

    Directory of Open Access Journals (Sweden)

    Jong-Ho Nam

    2010-06-01

    Full Text Available A concept of preliminary design for mid-size superyachts is explored. First, the profile of a superyacht is interactively designed with the help of freeform curve functionality and graphical user interface (GUI based interaction. The hull form is then constructed using major characteristic curves such as design waterline, deck sideline, and sections in addition to the predefined profile curve. After exterior hull modeling is done, the arrangement of significant interior spaces of all decks is carried out. A genetic algorithm is exploited to find a space arrangement by considering space fitness values, space proximity, and stairs connectivity of relevant spaces. A goal of the paper is to offer a step-by-step procedure for superyacht design from scratch or when initial information is not sufficient for complete design. For this purpose, a GUI based superyacht design system is developed. This design approach is expected to help users interactively design mid-size superyachts.

  3. Anisotropic Concrete Compressive Strength

    DEFF Research Database (Denmark)

    Gustenhoff Hansen, Søren; Jørgensen, Henrik Brøner; Hoang, Linh Cao

    2017-01-01

    When the load carrying capacity of existing concrete structures is (re-)assessed it is often based on compressive strength of cores drilled out from the structure. Existing studies show that the core compressive strength is anisotropic; i.e. it depends on whether the cores are drilled parallel...... correlation to the curing time. The experiments show no correlation between the anisotropy and the curing time and a small strength difference between the two drilling directions. The literature shows variations on which drilling direction that is strongest. Based on a Monto Carlo simulation of the expected...

  4. Strength of human pulleys.

    Science.gov (United States)

    Manske, P R; Lesker, P A

    1977-06-01

    The length, breaking stength, and tensile strength of each of the annular fibroosseous pulleys of digital flexor sheath in ten fresh human cadaver specimens were measured. The first annular pulley and the fourth annular pulley were found to be the strongest, while the second annular pulley was the weakest. The design of artificial pulleys should reproduce the strength of the first annular and fourth annular pulleys. Suggested minimum requirements for the breaking strength of artificial implant pulleys may be made based on these studies.

  5. Validation of Numerical Predictions of the Impact Forces and Hydrodynamics of a Deep-V Planing Hull

    Science.gov (United States)

    2012-12-01

    force a planing hull model in roll motion was designed and built. The Forced Roll Mechanism was intended to act as a dynamometer that forces a...test runs. The dynamometer can be configured to either oscillate the model or hold the model at a fixed roll angle, and measure the forces whether...post assembly measure purely vertical and horizontal (sway) forces in the tow tank reference frame. However, the bi-axial load cell is attached to the

  6. An Analysis of Wind Power Development in the Town of Hull, MA_Appendix 4_Geophysical Survey Report

    Energy Technology Data Exchange (ETDEWEB)

    Adams, Christopher

    2013-06-30

    CR Environmental, Inc. (CR) was contracted by GZA GeoEnvironmental, Inc. (GZA) to perform hydrographic and geophysical surveys of an approximately 3.35 square mile area off the eastern shore of Hull, Massachusetts. Survey components included: • Single-beam bathymetry; • 100-kHz and 500-kHz side scan sonar; • Magnetometry; and • Low to mid-frequency sub-bottom profiling.

  7. INVESTIGATION OF ADSORBABILITY OF SILICON DIOXIDE FROM RICE HULL AS REGARDS COPPER (II) AND MANGANESE (II) IONS

    OpenAIRE

    Холомейдик (Kholomeydik), Анна (Anna) Николаевна (Nikolaevna); Николенко (Nikolenko), Юрий (Jurij) Михайлович (Mihajlovich); Земнухова (Zemnuhova), Людмила (Ljudmila) Алексеевна (Alekseevna); Устинов (Ustinov), Алекандр (Alekandr) Юрьевич (Jur'evich); Майоров (Mayorov), Виталий (Vitalij) Юрьевич (Yur'evich); Полякова (Polyakova), Наталья (Natal'ja) Владимировна (Vladimirovna)

    2015-01-01

    The samples silicone dioxide containing 95−99,9% of the basic substance depending on conditions of the raw materials preparation and the temperature of treatment were obtained from rice hull by the oxidation burring method. Their phase composition and morphology were studied. The samples have amorphous and crystal state. Their specific surface and pore size distribution were determined by nitrogen adsorption. The specific surface value varied in the range of 6−230 m2/g and the pore diameters ...

  8. Effects of different grinding levels (particle size of soybean hull on starting pigs performance and digestibility

    Directory of Open Access Journals (Sweden)

    Ivan Moreira

    2009-10-01

    Full Text Available Two experiments were carried out to study the effects of grinding of soybean hulls (SH on starting pigs (15-30 kg diets. Experiment I consisted of a digestibility trial with 12 barrows, initial average body weight 21.9±1.29 kg, in which the best digestibility coefficient (DC of DM and GE was obtained with SH ground through a 2.5mm screen mesh, evaluated for CP and ME, a best DC was attained with 3.0 mm screen mesh. In the Experiment II, five diets with increasing SH (2.5 mm levels (0, 3, 6, 9 and 12 % for starting piglets were formulated. A quadratic response in daily weight gain (DWG occurred, according to SH inclusion. Worst DWG occurred at 7.75 % SH inclusion. Daily feed intake, feed: gain ratio and plasma urea nitrogen were not affected by inclusion levels. In conclusion, although soybean hull grinding improves the digestible nutrients, inclusion of SH on starting pig diets is economically unfeasible.Foram conduzidos dois experimentos para estudar os efeitos da moagem da casca de soja (CS nas dietas de leitões na fase inicial (15-30 kg. O Experimento I consistiu de um ensaio de digestibilidade com 12 suínos machos castrados, com peso inicial médio de 21,9±1,29 kg. O melhor coeficiente de digestibilidade (CD da MS e EB foi obtido com a peneira 3,0 mm. No Experimento II, foram formuladas cinco dietas com níveis crescentes (0, 3, 6, 9 e 12% de CS (2,5 mm para suínos na fase inicial. Foi obtida resposta quadrática para ganho diário de peso (GDP em função dos níveis crescentes de CS. Pior GDP ocorreu com 7,75 % de inclusão de CS. Consumo diário de ração, conversão alimentar e nitrogênio da uréia plasmática não foram influenciados pela inclusão da CS. Conclui-se que, embora a moagem melhore a digestibilidade dos nutrientes da casca de soja, a sua inclusão nas dietas de suínos na fase inicial é economicamente inviável.

  9. Heat-treatment reduces anti-nutritional phytochemicals and maintains protein quality in genetically improved hulled soybean flour

    Directory of Open Access Journals (Sweden)

    Ariela Werneck de Carvalho

    2013-06-01

    Full Text Available The soybean is a protein source of high biological value. However, the presence of anti-nutritional factors affects its protein quality and limits the bioavailability of other nutrients. The effect of heat-treatment, 150 ºC for 30 minutes, on hulled and hull-less soybean flour from the cultivar UFVTN 105AP on urease, trypsin inhibitor activity, protein solubility, amino acid profile, and in vivo protein quality was investigated. The treatment reduced the trypsin inhibitor activity and urease, but it did not affect protein solubility. Protein Efficiency Coefficient (PER values of the flours were similar, and the PER of the hull-less soybean flour did not differ from casein. The Net Protein Ratio (NPR did not differ between the experimental groups. The True Digestibility (TD of the flours did not differ, but both were lower in casein and the Protein Digestibility Corrected Amino Acid Score (PDCCAS was lower than the TD, due to limited valine determined by the chemical score. Therefore, the flours showed reduced anti-nutritional phytochemicals and similar protein quality, and therefore the whole flours can be used as a source of high quality protein.

  10. Determination of trace copper in food samples by flame atomic absorption spectrometry after solid phase extraction on modified soybean hull

    Energy Technology Data Exchange (ETDEWEB)

    Xiang Guoqiang, E-mail: xianggq@126.com [School of Chemistry and Chemical Engineering, Henan University of Technology, Zhengzhou 450001 (China); Zhang Yingming; Jiang Xiuming; He Lijun; Fan Lu; Zhao Wenjie [School of Chemistry and Chemical Engineering, Henan University of Technology, Zhengzhou 450001 (China)

    2010-07-15

    Soybean hull was chemically modified with citric acid and used as a solid phase extraction adsorbent for the determination of trace amounts of Cu{sup 2+} in food samples by flame absorption spectrometry (FAAS). The effect of pH, sample flow rate and volume, elution flow rate and volume and co-existing ions on the recovery of the analyte were investigated. The results showed that Cu{sup 2+} could be adsorbed on the modified soybean hull at pH 8.0 and eluted by 2.0 mL of 1.0 mol L{sup -1} HCl. Under the optimized conditions, the adsorption capacity of modified soybean hull was found to be 18.0 mg g{sup -1} for Cu{sup 2+}. The detection limit of the proposed method was 0.8 ng mL{sup -1} for Cu{sup 2+} with an enrichment factor of 18. The analytical result for the certified reference tea sample (GBW07605) was in a good agreement with the certified value. The proposed method has also been successfully applied to the determination of trace Cu{sup 2+} in dried sweet potato, lake water and milk powder, the recovery of Cu{sup 2+} for spiked samples was between 91% and 109.6%.

  11. Simultaneous determination of neonicotinoid insecticides in sunflower-treated seeds (hull and kernel) by LC-MS/MS.

    Science.gov (United States)

    Sánchez-Hernández, Laura; Higes, Mariano; Martín, María T; Nozal, María J; Bernal, José L

    2016-01-01

    A validated analytical method to determine seven neonicotinoids (dinotefuran, nitenpyram, thiamethoxam, clothianidin, imidacloprid, acetamiprid and thiacloprid) in sunflower seeds (hull and kernel) using HPLC coupled to electrospray ionisation mass spectrometry (ESI-MS) is presented. Sample clean-up based on a solid-liquid extraction, and the removal of lipid fraction, in the case of kernels, is proposed and optimised. Low limits of detection and quantification were obtained, ranging from 0.3 × 10(-3) to 1.2 × 10(-3) µg g(-1) and from 1.0 × 10(-3) to 4.0 × 10(-3) µg g(-1), with good precision, and recovery values ranged from 90% to 104% for hulls and kernels. The method was applied for the analysis of five thiamethoxam-dressed sunflower seeds and four non-treated seeds, where, besides thiamethoxam, residues of the other neonicotinoid, clothianidin, were also detected and confirmed via tandem mass spectrometry (LC-ESI-MS/MS). Finally, the presence of residues of thiamethoxam and clothianidin in collected sunflower seeds (hulls) coming from coated seeds confirmed the translocation of these neonicotinoids through the plant up to these seeds.

  12. Agaricus blazei production on non-composted substrates based on sunflower seed hulls and spent oyster mushroom substrate.

    Science.gov (United States)

    González Matute, R; Figlas, D; Curvetto, N

    2011-06-01

    Agaricus blazei Murrill is usually cultivated using the same biphasic composting method employed for A. bisporus. Because cultivation of A. blazei on traditional A. bisporus composts poses some disadvantages, non-composted substrates were studied for A. blazei cultivation. Mycelial growth rate and productive performance of A. blazei were evaluated on substrates containing sunflower seed hulls, Pleurotus spp. spent mushroom substrate, or their combination, in the absence or in the presence of different supplements (vermicompost, peat or brewery residues). Substrates were prepared by initially soaking them and then they were sterilized (1 atm for 120 min). In addition, each substrate's degradation was measured after cultivation by obtaining the lignin, cellulose, hemicellulose, organic matter, total fiber, ash, carbon and nitrogen contents before spawn-run and at the end of two flushes of A. blazei. The cultivation of A. blazei on non-composted substrates is possible and with a low rate of contamination when using the spent mushroom substrate as the main component or combined 50:50 with sunflower seed hulls. In addition, the best yields were obtained on those substrates containing spent Pleurotus mushroom substrate with supplements and those mixtures with sunflower seed hulls and vermicompost. These yields were similar to those reported on composted substrates. Substrate changes in composition measured at the end of two flushes indicate that the lignin-hemicellulose fraction was preferentially used and that the substrates exhibiting the best yield showed greater biodegradation of lignin-hemicellulose fraction than the others did.

  13. Size effect on strength and lifetime probability distributions of ...

    Indian Academy of Sciences (India)

    ments and ships, as well as computer circuits, chips and MEMS, should be designed for failure ... The theory is shown to match the experimentally observed systematic deviations of strength and lifetime histograms of industrial ceramics from the Weibull distribution. ... A probabilistic theory was recently developed to model.

  14. Data on photo-nanofiller models for self-cleaning foul release coating of ship hulls.

    Science.gov (United States)

    Selim, Mohamed S; El-Safty, Sherif A; El-Sockary, Maher A; Hashem, Ahmed I; Abo Elenien, Ossama M; El-Saeed, Ashraf M; Fatthallah, Nesreen A

    2016-09-01

    The data presented in this article are related to the research article entitled "Smart photo-induced silicone/TiO2 nanocomposites with dominant [110] exposed surfaces for self-cleaning foul-release coatings of ship hulls" (Selimet al., 2016) [1]. This article reports on successfully designing and controlling TiO2 spherical single crystal photo-nanofillers and indicating evidence of fouling resistance after stimulation through UV radiation exposure. These data also reveal that the influence of well-dispersed spherical TiO2 nanoparticles (NPs) into the polymer matrix surface features on the prepared fouling release (FR) coating. Single crystal TiO2 nanospheres have played a large role in the scenario of photocatalysis due to its cost effectiveness, inert nature and photo stability. The model output and the surface and mechanical behavior data of the fabricated UV-irradiated silicone-based FR nanocoatings are made publicly available through analyzing nanocomposite topology, superhydrophilicity and self-cleaning efficiency in order to enable critical analysis of the tailored model. It also investigates the photo-bactericidal effect confirmed through biofilm coverage data disability. The modeled nanocomposites were subjected to comparable studies with other published models so as to understand how different UV-irradiated nano-scale parameters propagate and affect bulk film response.

  15. Degradation of Al/SiCp composites produced with rice-hull ash and aluminum cans.

    Science.gov (United States)

    Escalera-Lozano, R; Gutiérrez, C A; Pech-Canul, M A; Pech-Canul, M I

    2008-01-01

    The use of recycling aluminum from beverage containers and rice-hull ash (RHA) offers to be an attractive alternative for the economic production of Al/SiCp composites. However, corrosion phenomena in the composites represent technological barriers yet to be resolved before they can be exploited to their full potential. A simple methodology involving characterization by XRD, SEM, EDX, FTIR and ICP was designed in order to investigate the causes of the rapid degradation in a humid environment of Al/SiCp composites produced with RHA and aluminum cans. Results reveal that the use of RHA was beneficial to avoid degradation through the formation and subsequent hydration of the Al4C3 phase. However with condensed moisture acting as an electrolyte, localized corrosion took place with aggressive damage manifested by the disintegration of the composite into a powdery mixture. The relevant corrosion mechanism was mainly attributed to microgalvanic coupling between the Mg2Si intermetallic compound and the matrix (although other phases such as SiC, Si, MgAl2O4 could also work as microcathodes).

  16. Visual hull method for tomographic PIV of flow around moving objects

    Science.gov (United States)

    Adhikari, Deepak; Longmire, Ellen

    2011-11-01

    Measurement of velocity around arbitrarily moving objects is of interest in many applications. This includes flow around marine animals and flying insects, flow around supercavitating projectiles, and flow around discrete drops or particles in multiphase flows. We present a visual hull technique that employs existing tomographic PIV reconstruction software to automate identification, masking and tracking of discrete objects within a three-dimensional volume, while allowing computation and avoiding contamination of the surrounding three-component fluid velocity vectors. The technique is demonstrated by considering flow around falling objects of different shape, namely a sphere, cube, tetrahedron and cylinder. Four high-speed cameras and a laser are used to acquire images of these objects falling within liquid seeded with tracer particles. The acquired image sets are then processed to reconstruct both the object and the surrounding tracer particles. The reconstructed object is used to estimate the object location at each time step and mask the reconstructed particle volume, while the reconstructed tracer particles are cross-correlated with subsequent particle volumes to obtain the fluid velocity vectors. Supported by NSF IDBR Grant #0852875.

  17. Potential Propagation by Seed and Cuttings of the Azorean Native Calluna vulgaris (L. Hull

    Directory of Open Access Journals (Sweden)

    Maria João Pereira

    2014-01-01

    Full Text Available This work investigates the potential propagation by seed and cuttings of the Azorean native Calluna vulgaris (L. Hull. for landscape conservation. With that purpose we have performed several germination and cuttings trials, using plant material from wild populations of this species. In the germination trials, we tested the effects of photoperiod length (8 and 16 h, temperature (10, 15, 20, and 20–10°C, seed age (6, 108, and 270 days, temperature of seed storage (4°C and room temperature, and seed surface sterilization on the germination characteristics. In the cuttings trials, we tested the effects of stem cutting type, cultural conditions, cuttings’ harvest month, and rooting substrates on the rooting percentages. The best percentages of germination, 93 and 90%, were obtained with fresh seeds and surface sterilized and sown under an 8 h photoperiod and with temperatures of 10°C or 15°C, respectively; germination after seed storage during 270 days is significantly superior (71% when seeds are stored at 4°C. The best percentages of rooting were achieved for straight (96% or heel cuttings (90% harvested in March, planted on soil from natural stands of C. vulgaris and Erica azorica Hochst., outdoors in half shade, and partially covered with transparent polyethylene film.

  18. Design Of A Small-Scale Hulling Machine For Improved Wet-Processed Coffee.

    Directory of Open Access Journals (Sweden)

    Adeleke

    2017-08-01

    Full Text Available The method of primary processing of coffee is a vital determinant of quality and price. Wet processing method produces higher quality beans but is very labourious. This work outlines the design of a small scale cost-effective ergonomic and easily maintained and operated coffee hulling machine that can improve quality and productivity of green coffee beans. The machine can be constructed from locally available materials at a relatively low cost of about NGN 140000.00 with cheap running cost. The beaters are made from rubber strip which can deflect when in contact with any obstruction causing little or no stresses on drum members and reducing the risk of damage to both the beans and machine. The machine is portable and detachable which make it fit to be owned by a group of farmers who can move it from one farm to the other making affordability and running cost easier. The easily affordable and relatively low running cost may be further reduced by the fact that the machine is powered by 3.0 Hp petrol engine which is suitable for other purposes among the rural dwellers. The eventual construction of the machine will encourage more farmers to go into wet processing of coffee and reduce the foreign exchange hitherto lost to this purpose.

  19. Lead sheathing of ship hulls in the Roman period: Archaeometallurgical characterisation

    Energy Technology Data Exchange (ETDEWEB)

    Kahanov, Yaacov, E-mail: yak@research.haifa.ac.il [Leon Recanati Institute for Maritime Studies, University of Haifa, Haifa 31905 (Israel); Ashkenazi, Dana [Faculty of Engineering, Tel Aviv University, Ramat Aviv 69978 (Israel)

    2011-08-15

    An archaeometallurgical analysis of samples of lead sheathing from five ships of the Roman period was carried out in order to determine their composition and microstructure, and to obtain a better understanding of their manufacturing processes. The examinations included optical microscopy of metallographic cross-sections, microhardness tests, scanning electron microscopy, including energy dispersive spectroscopy, and X-ray photoelectron spectroscopy. The results show that the samples were all composed of lead covered with an oxide layer. The sheet thicknesses, microhardness values and microhardness distribution, as well as the grain size distribution, led to the conclusion that all of the sheets were produced by the same technology, using hammering, and were probably used for the same purpose. The presence of antimony was observed in the sample from the Roman ship from Caesarea, which may hint at an Italian (Sardinian) origin of the material, and perhaps of the ship. - Research Highlights: {yields} During the Roman period ship hulls were sheathed with lead. {yields} Five samples have been analysed for their characteristics and manufacturing process. {yields} The process was cold-working (strain-hardening) using hammering. {yields} The lead was open-casted on a flat stone, and later hammered at room temperature. {yields} Antimony in the Caesarea shipwreck may indicate an Italian origin of construction.

  20. Xanthium strumarium L. seed hull as a zero cost alternative for Rhodamine B dye removal.

    Science.gov (United States)

    Khamparia, Shraddha; Jaspal, Dipika Kaur

    2017-07-15

    Treatment of polluted water has been considered as one of the most important aspects in environmental sciences. Present study explores the decolorization potential of a low cost natural adsorbent Xanthium strumarium L. seed hull for the adsorption of a toxic xanthene dye, Rhodamine B (RHB). The characterization of the adsorbent revealed the presence of high amount of carbon, when exposed to Electron Dispersive Spectroscopy (EDS). Further appreciable decolorization took place which was confirmed by Fourier Transform Infrared Spectroscopy (FTIR) analysis noticing shift in peaks. Isothermal studies indicated multilayer adsorption following Freundlich isotherm. The rate of adsorption was supported by second order kinetics directing a chemical phenomenon during the process with dominance of film diffusion as the rate governing step. Moreover paper aims at correlating the chemical arena to the mathematical aspect providing an in-depth information of the studied treatment process. For proper assessment and validation of the observed data, experimental data has been statistically treated by applying different error functions namely, Chi-square test (χ 2 ), Sum of absolute errors (EABS) and Normalized standard deviation (NSD). Further practical applicability of the low cost adsorbent was evaluated by continuous column mode studies with 72.2% of dye recovery. Xanthium strumarium L. proved to be environment friendly low cost natural adsorbent for decolorizing RHB from aquatic system. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. What Lies Beneath? An Evaluation of Rapid Assessment Tools for Management of Hull Fouling

    Science.gov (United States)

    Clarke Murray, Cathryn; Therriault, Thomas W.; Pakhomov, Evgeny

    2013-08-01

    Despite an increased understanding of marine invasions, non-indigenous species (NIS) continue to be redistributed at both global and regional scales. Since prevention is an important element of NIS programs, monitoring vectors responsible for NIS introductions and spread, such as hull fouling, has become a priority and methods should be selected carefully to balance accuracy, time, and cost. Two common fouling assessment tools for the marine recreational boating vector were evaluated for accuracy using a traditional underwater SCUBA survey in coastal British Columbia: a dockside level of fouling assessment and a behavioral questionnaire model. Results showed that although rapid, dockside assessments did not provide an accurate assessment of fouling present below the surface, at least not in this region. In contrast, a questionnaire-based model using four easily obtained variables (boat type, age of antifouling paint, storage type, and occurrence of long distance trips) reliably identified boats carrying macrofouling species, a proxy for risk of NIS transport. Once validated, this fouling model tool could be applied in border inspection or quarantine situations where decisions must be made quickly. Further development and refinement of rapid assessment tools would improve our ability to prevent new introductions and manage spread of existing invasive species.

  2. Removal of some metal ions by activated carbon prepared from Phaseolus aureus hulls

    Energy Technology Data Exchange (ETDEWEB)

    Rao, M. Madhava; Ramana, D.K.; Seshaiah, K. [Analytical and Environmental Chemistry Division, Department of Chemistry, Sri Venkateswara University, Tirupati 517 502 (India); Wang, M.C., E-mail: mcwang@cyut.edu.tw [Department of Environmental Engineering and Management, Chaoyang University of Technology, Wufong Township 41349, Taichung County, Taiwan (China); Chien, S.W. Chang [Department of Environmental Engineering and Management, Chaoyang University of Technology, Wufong Township 41349, Taichung County, Taiwan (China)

    2009-07-30

    Removal of lead [Pb(II)], zinc [Zn(II)], copper [Cu(II)], and cadmium [Cd(II)] from aqueous solutions using activated carbon prepared from Phaseolus aureus hulls (ACPAH), an agricultural waste was studied. The influence of various parameters such as effect of pH, contact time, adsorbent dose, and initial concentration of metal ions on the removal was evaluated by batch method. The removal of metal ions by ACPAH was pH dependent and the optimum pH values were 7.0, 8.0, 7.0 and 6.0 for Cu(II), Cd(II), Zn(II), and Pb(II), respectively. The sorption isotherms were studied using Langmuir, Freundlich, Dubinin-Radushkevich (D-R), and Temkin isotherm models. The maximum adsorption capacity values of ACPAH for metal ions were 21.8 mg g{sup -1} for Pb(II), 21.2 mg g{sup -1} for Zn(II), 19.5 mg g{sup -1} for Cu(II), and 15.7 mg g{sup -1} for Cd(II). The experiments demonstrated that the removal of metal ions followed the pseudo-second-order kinetic model. Desorption experiments were carried out using HCl solution with a view to regenerate the spent adsorbent and to recover the adsorbed metal ions.

  3. A Moessbauer Spectral Study of the Hull Steel and Rusticles Recovered from the Titanic

    Energy Technology Data Exchange (ETDEWEB)

    Long, Gary J., E-mail: glong@umr.edu; Hautot, Dimitri [University of Missouri-Rolla, Department of Chemistry (United States); Grandjean, Fernande; Vandormael, D. [University of Liege, Institute of Physics, B5 (Belgium); Leighly, H. P. [University of Missouri-Rolla, Department of Metallurgical Engineering (United States)

    2004-09-15

    The recent recovery of steel from the Titanic has permitted a 295 K conversion electron Moessbauer spectral study of the Titanic hull plate steel oriented with the gamma-ray direction either perpendicular or parallel to the microstructural banding directions. The two spectra reveal virtually identical average orientations of the magnetization close to the plane of the plate. The hyperfine parameters are virtually identical to those of {alpha}-iron, a finding which agrees with the chemical analysis which reveals at most 0.21 wt% carbon corresponding to 3 wt% of cementite in pearlite. A 4.2 to 295 K transmission Moessbauer spectral study of the rusticles reveals small particles of geothite undergoing superparamagnetic relaxation with a blocking temperature of ca. 300 K. In addition approximately two percent of the Moessbauer spectral absorption area corresponds to a quadrupole doublet with hyperfine parameters typical of green rust. The identified iron containing components in therusticles agree with the powder X-ray diffraction results which reveal the predominant presence of small particles of poorly crystallized goethite and traces of quartz and green rust. An average size of 20{+-}5 nm for the goethite particles is obtained from both the average hyperfine field and the broadening of the X-ray diffraction peaks. The magnetic anisotropy constant of the goethite particles deduced from the hyperfine field and the particle size is 8x10{sup 3} J/m{sup 3}.

  4. Pistachio hull water-soluble polysaccharides as a novel prebiotic agent.

    Science.gov (United States)

    Akbari-Alavijeh, Safoura; Soleimanian-Zad, Sabihe; Sheikh-Zeinoddin, Mahmoud; Hashmi, Sarwar

    2018-02-01

    We isolated and characterized pistachio hull polysaccharides (PHP). The PHP was a heteropolysaccharide mainly contained 75.50% (w/w) total sugar and 9.51% (w/w) uronic acid. As determined by GPC analysis, the polysaccharide with a molecular weight of 3.71×10 6 D (83.2%) was the most dominant fraction. Moreover, HPLC analysis indicated that PHP was predominantly composed of xylose, glucose, arabinose, and fructose with a molar ratio of 1.00:2.50:19.67:28.81. FT-IR and NMR analysis also confirmed the results obtained by HPLC and characterized preliminary structure features of the PHP. Functional properties of the PHP including water holding capacity (WHC: 2.44±0.05g water/g DM), and oil holding capacity (OHC: 11.53±0.04g oil/g DM) were significant compared to inulin used as reference prebiotic (pPHP remained 94.37% undigested in the simulated digestion process and stimulated the growth of L. plantarum PTCC 1896 and L. rhamnosus GG and increased the acetate, propionate and butyrate production over inulin in vitro. Totally, the PHP showed a considerable prebiotic capability and high WHC, OHC suggesting that the PHP is a potent pharmaceutical with good technological properties which can be used in food and drug industries. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Strength of Fibrous Composites

    CERN Document Server

    Huang, Zheng-Ming

    2012-01-01

    "Strength of Fibrous Composites" addresses evaluation of the strength of a fibrous composite by using its constituent material properties and its fiber architecture parameters. Having gone through the book, a reader is able to predict the progressive failure behavior and ultimate strength of a fibrous laminate subjected to an arbitrary load condition in terms of the constituent fiber and matrix properties, as well as fiber geometric parameters. The book is useful to researchers and engineers working on design and analysis for composite materials. Dr. Zheng-Ming Huang is a professor at the School of Aerospace Engineering & Applied Mechanics, Tongji University, China. Mr. Ye-Xin Zhou is a PhD candidate at the Department of Mechanical Engineering, the University of Hong Kong, China.

  6. Strength conditions for the elastic structures with a stress error

    Science.gov (United States)

    Matveev, A. D.

    2017-10-01

    As is known, the constraints (strength conditions) for the safety factor of elastic structures and design details of a particular class, e.g. aviation structures are established, i.e. the safety factor values of such structures should be within the given range. It should be noted that the constraints are set for the safety factors corresponding to analytical (exact) solutions of elasticity problems represented for the structures. Developing the analytical solutions for most structures, especially irregular shape ones, is associated with great difficulties. Approximate approaches to solve the elasticity problems, e.g. the technical theories of deformation of homogeneous and composite plates, beams and shells, are widely used for a great number of structures. Technical theories based on the hypotheses give rise to approximate (technical) solutions with an irreducible error, with the exact value being difficult to be determined. In static calculations of the structural strength with a specified small range for the safety factors application of technical (by the Theory of Strength of Materials) solutions is difficult. However, there are some numerical methods for developing the approximate solutions of elasticity problems with arbitrarily small errors. In present paper, the adjusted reference (specified) strength conditions for the structural safety factor corresponding to approximate solution of the elasticity problem have been proposed. The stress error estimation is taken into account using the proposed strength conditions. It has been shown that, to fulfill the specified strength conditions for the safety factor of the given structure corresponding to an exact solution, the adjusted strength conditions for the structural safety factor corresponding to an approximate solution are required. The stress error estimation which is the basis for developing the adjusted strength conditions has been determined for the specified strength conditions. The adjusted strength

  7. High strength alloys

    Energy Technology Data Exchange (ETDEWEB)

    Maziasz, Phillip James; Shingledecker, John Paul; Santella, Michael Leonard; Schneibel, Joachim Hugo; Sikka, Vinod Kumar; Vinegar, Harold J.; John, Randy Carl; Kim, Dong Sub

    2012-06-05

    High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tublar that is at least partially made from a material containing at least one of the metal alloys.

  8. High strength alloys

    Energy Technology Data Exchange (ETDEWEB)

    Maziasz, Phillip James [Oak Ridge, TN; Shingledecker, John Paul [Knoxville, TN; Santella, Michael Leonard [Knoxville, TN; Schneibel, Joachim Hugo [Knoxville, TN; Sikka, Vinod Kumar [Oak Ridge, TN; Vinegar, Harold J [Bellaire, TX; John, Randy Carl [Houston, TX; Kim, Dong Sub [Sugar Land, TX

    2010-08-31

    High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tubular that is at least partially made from a material containing at least one of the metal alloys.

  9. Hand grip strength

    DEFF Research Database (Denmark)

    Frederiksen, Henrik; Gaist, David; Petersen, Hans Christian

    2002-01-01

    in life is a major problem in terms of prevalence, morbidity, functional limitations, and quality of life. It is therefore of interest to find a phenotype reflecting physical functioning which has a relatively high heritability and which can be measured in large samples. Hand grip strength is known......-55%). A powerful design to detect genes associated with a phenotype is obtained using the extreme discordant and concordant sib pairs, of whom 28 and 77 dizygotic twin pairs, respectively, were found in this study. Hence grip strength is a suitable phenotype for identifying genetic variants of importance to mid...

  10. Strength development in concrete with wood ash blended cement and use of soft computing models to predict strength parameters

    Directory of Open Access Journals (Sweden)

    S. Chowdhury

    2015-11-01

    Full Text Available In this study, Wood Ash (WA prepared from the uncontrolled burning of the saw dust is evaluated for its suitability as partial cement replacement in conventional concrete. The saw dust has been acquired from a wood polishing unit. The physical, chemical and mineralogical characteristics of WA is presented and analyzed. The strength parameters (compressive strength, split tensile strength and flexural strength of concrete with blended WA cement are evaluated and studied. Two different water-to-binder ratio (0.4 and 0.45 and five different replacement percentages of WA (5%, 10%, 15%, 18% and 20% including control specimens for both water-to-cement ratio is considered. Results of compressive strength, split tensile strength and flexural strength showed that the strength properties of concrete mixture decreased marginally with increase in wood ash contents, but strength increased with later age. The XRD test results and chemical analysis of WA showed that it contains amorphous silica and thus can be used as cement replacing material. Through the analysis of results obtained in this study, it was concluded that WA could be blended with cement without adversely affecting the strength properties of concrete. Also using a new statistical theory of the Support Vector Machine (SVM, strength parameters were predicted by developing a suitable model and as a result, the application of soft computing in structural engineering has been successfully presented in this research paper.

  11. Abomasal or ruminal administration of flax oil and hulls on milk production, digestibility, and milk fatty acid profile of dairy cows.

    Science.gov (United States)

    Kazama, R; Côrtes, C; da Silva-Kazama, D; Gagnon, N; Benchaar, C; Zeoula, L M; Santos, G T D; Petit, H V

    2010-10-01

    Four ruminally fistulated primiparous lactating Holstein cows were assigned to a 4 × 4 Latin square design to determine the effects of the site of administration (rumen or abomasum) of flax oil and flax hulls on diet digestibility and milk fatty acid profile of dairy cows. The treatments were 1) oil and hulls administered in the rumen and abomasal infusion of water (RUM/RUM), 2) oil and hulls infused in the abomasum (ABO/ABO), 3) oil administered in the rumen and hulls infused in the abomasum (RUM/ABO), and 4) oil infused in the abomasum and hulls placed in the rumen (ABO/RUM). Cows on the ABO/ABO and RUM/RUM treatments had the highest and lowest amounts of basal dry matter eaten, respectively. Higher dry matter digestibility was obtained when flax oil bypassed the rumen (ABO/ABO and ABO/RUM) compared with when flax oil was administered directly in the rumen (RUM/ABO and RUM/RUM). Apparent digestibility of ether extract was higher when flax hulls were administered in the rumen (RUM/RUM and ABO/RUM) compared with when flax hulls were infused in the abomasum (ABO/ABO and RUM/ABO). The lowest digestibility of acid detergent fiber and neutral detergent fiber was obtained when both flax products were added in the rumen, which may be attributed to the high amount of oil present in the rumen (7.8% of total dry matter input). The lowest yield of 4% fat-corrected milk was obtained for cows on the RUM/RUM treatment, probably as a result of lower dry matter intake and digestibility of fiber. Milk concentrations of protein, fat, total solids, and lactose were similar among treatments. Administration of oil and hulls in the rumen resulted in the highest concentrations of intermediate products of biohydrogenation and total trans fatty acids in milk fat compared with the other treatments. All ratios of n-6 to n-3 fatty acids in milk fat were lower than the 4 to 1 ratio recommended to improve human health. These results suggest that the presence of both flax oil and flax hulls in

  12. EFFECTS OF INCLUSION OF HULL-LESS BARLEY AND ENZYME SUPPLEMENTATION OF BROILER DIETS ON GROWTH PERFORMANCE, NUTRIENT DIGESTION AND DIETARY METABOLISABLE ENERGY CONTENT

    Directory of Open Access Journals (Sweden)

    Seyed Davood SHARIFI

    2012-03-01

    Full Text Available Two trials were conducted to study the effect of inclusion of hull-less barley and exogenous enzyme to broiler diet on the growth performance, apparent metabolisable energy (AME and Nutrient digestibility of broiler chickens. The experiments were 3×4 factorial arrangements with three levels of enzyme (0, 300 and 600 g/ton and four levels of hull-less barley inclusion (0, 10, 20 and 30% in diet. The digestion trial was performed in battery cage with 648 male broiler chickens where twelve experimental diets were fed to the chickens from 15-21 (starter and 35-45 (finisher days of age. In the growth trial, the experimental diets were fed to 960 broiler chicks distributed in 48 pens for a 7-week feeding trial on growing (0-3 weeks, grower (4-5 weeks and finisher (6-7 weeks periods. Results showed that increasing the amount of hull_less barley inclusion decreased feed intake and live-weight gain both in the starter and grower period (P<.0.01 but, did not significantly influence in finisher period. At the overall rearing period (0-49 days, increasing amount of hull-less barley in diet significantly decreased feed intake, weight gain, and feed conversion ratio (p<0.01. Increasing in hull-less barley inclusion rate, increased relative weight of gastrointestinal track, liver and ceca (P<0.01 but, did not influence the relative weight of abdominal fat and gizzard as well as the rate of mortality. Hull-less barley inclusion in diet decreased dietary AME and ileal and total tract digestibility of organic matter, crude protein, crude fat and starch in the starting period (p<0.01. The hull-less barley inclusion, however, did not significantly influence the nutrient digestibility (exclude crude fat and AME in the finishing period. Enzyme supplementation did not show improvement in growth performance and nutrient digestibility in broilers. Increasing the amount of hull-less barley in the diet had the most negative effect on nutrient digestion of broilers at

  13. String Theory

    OpenAIRE

    Marino Beiras, Marcos

    2011-01-01

    We give an overview of the relations between matrix models and string theory, focusing on topological string theory and the Dijkgraaf--Vafa correspondence. We discuss applications of this correspondence and its generalizations to supersymmetric gauge theory, enumerative geometry and mirror symmetry. We also present a brief overview of matrix quantum mechanical models in superstring theory.

  14. Game Theory

    DEFF Research Database (Denmark)

    Game Theory is a collection of short interviews based on 5 questions presented to some of the most influential and prominent scholars in game theory. We hear their views on game theory, its aim, scope, use, the future direction of game theory and how their work fits in these respects....

  15. Ring Theory

    CERN Document Server

    Jara, Pascual; Torrecillas, Blas

    1988-01-01

    The papers in this proceedings volume are selected research papers in different areas of ring theory, including graded rings, differential operator rings, K-theory of noetherian rings, torsion theory, regular rings, cohomology of algebras, local cohomology of noncommutative rings. The book will be important for mathematicians active in research in ring theory.

  16. Kolkhoung (Pistacia khinjuk) Hull Oil and Kernel Oil as Antioxidative Vegetable Oils with High Oxidative Stability 
and Nutritional Value.

    Science.gov (United States)

    Asnaashari, Maryam; Hashemi, Seyed Mohammad Bagher; Mehr, Hamed Mahdavian; Yousefabad, Seyed Hossein Asadi

    2015-03-01

    In this study, in order to introduce natural antioxidative vegetable oil in food industry, the kolkhoung hull oil and kernel oil were extracted. To evaluate their antioxidant efficiency, gas chromatography analysis of the composition of kolkhoung hull and kernel oil fatty acids and high-performance liquid chromatography analysis of tocopherols were done. Also, the oxidative stability of the oil was considered based on the peroxide value and anisidine value during heating at 100, 110 and 120 °C. Gas chromatography analysis showed that oleic acid was the major fatty acid of both types of oil (hull and kernel) and based on a low content of saturated fatty acids, high content of monounsaturated fatty acids, and the ratio of ω-6 and ω-3 polyunsaturated fatty acids, they were nutritionally well--balanced. Moreover, both hull and kernel oil showed high oxidative stability during heating, which can be attributed to high content of tocotrienols. Based on the results, kolkhoung hull oil acted slightly better than its kernel oil. However, both of them can be added to oxidation-sensitive oils to improve their shelf life.

  17. Kolkhoung (Pistacia khinjuk) Hull Oil and Kernel Oil as Antioxidative Vegetable Oils with High Oxidative Stability 
and Nutritional Value

    Science.gov (United States)

    Asnaashari, Maryam; Mehr, Hamed Mahdavian; Yousefabad, Seyed Hossein Asadi

    2015-01-01

    Summary In this study, in order to introduce natural antioxidative vegetable oil in food industry, the kolkhoung hull oil and kernel oil were extracted. To evaluate their antioxidant efficiency, gas chromatography analysis of the composition of kolkhoung hull and kernel oil fatty acids and high–performance liquid chromatography analysis of tocopherols were done. Also, the oxidative stability of the oil was considered based on the peroxide value and anisidine value during heating at 100, 110 and 120 °C. Gas chromatography analysis showed that oleic acid was the major fatty acid of both types of oil (hull and kernel) and based on a low content of saturated fatty acids, high content of monounsaturated fatty acids, and the ratio of ω-6 and ω-3 polyunsaturated fatty acids, they were nutritionally well--balanced. Moreover, both hull and kernel oil showed high oxidative stability during heating, which can be attributed to high content of tocotrienols. Based on the results, kolkhoung hull oil acted slightly better than its kernel oil. However, both of them can be added to oxidation–sensitive oils to improve their shelf life. PMID:27904335

  18. Characterization and Mineralization Rates of Low Temperature Peanut Hull and Pine Chip Biochars

    Directory of Open Access Journals (Sweden)

    K.C. Das

    2013-04-01

    Full Text Available Biochar can potentially increase soil fertility and sequester carbon by incorporating nutrients and stable black carbon into the soil; however its effect on soil nitrogen (N and carbon (C processes is not well understood. A defined methodology to characterize biochar is necessary to predict how specific biochars will affect C and N mineralization. We amended a Tifton soil (Fine-loamy, siliceous, thermic Plinthic Kandiudults with peanut hull (Arachis hypogaea; PH; 2.1% N and pine chip (Pinus taeda; PC: 0.4% N biochar at application rates of 1% and 2% (w/w and performed a 136-day mineralization study. A companion 24-day mineralization study amended Tifton soil with PH and PC biochar at 2% and their respective feedstocks at equal C rates. Soil C mineralization rates were monitored periodically throughout each study and total N mineralization rates were also measured. In addition, we characterized each biochar using thermogravimetric analysis with mass spectrometer (TGA-MS, proximate analysis, Fourier transform infrared spectroscopy (FTIR, and total mineral analysis to identify biochar characteristics that might correlate with mineralization properties. Limited C (<2% mineralized from both biochars, but mineralization rates of soil amended with PH biochar were higher than PC biochar. Carbon mineralization correlated well with estimated aliphatic content determined by TGA-MS but not with volatile content indicated by proximate analysis. Nitrogen was not mineralized from either biochar, indicating that plant-based biochar should not be considered a source of N for plant growth. The N in biochar may be contained in the stable aromatic structure of the biochar, as indicated by TGA-MS, and not available to soil microbes.

  19. Removal of cadmium from aqueous solution using castor seed hull: a kinetic and equilibrium study

    Energy Technology Data Exchange (ETDEWEB)

    Sen, Tushar Kanti [Department of Chemical Engineering, Curtin University of Technology, Perth (Australia); Mohammod, Masita; Maitra, Saikat [Chemical Engineering Department, Universiti Teknologi Petronas, Petronas (Malaysia); Dutta, Binay K. [Chemical Engineering Program, Petroleum Institute, Abu Dhabi (United Arab Emirates)

    2010-09-15

    The effects of various parameters such as initial concentration, adsorbent loading, pH, and contact time on kinetics and equilibrium of adsorption of Cd{sup 2+} metal ion from its aqueous solution by castor seed hull (CSH) and also by activated carbon have been investigated by batch adsorption experiments. The amount of adsorption increases with initial metal ion concentration, contact time, solution pH, and the loading of adsorbent for both the systems. Kinetic experiments indicate that adsorption of cadmium metal ion on both CSH and on activated carbon consists of three steps - a rapid adsorption of cadmium metal ion, a transition phase, and an almost flat plateau region. This has also been confirmed by the intraparticle diffusion model. The lumped kinetic results show that the cadmium adsorption process follows a pseudo-second order rate law. The kinetic parameters including the rate constant are determined at different initial metal ion concentrations, pH, amount, and type of adsorbent, respectively. The Langmuir and Freundlich adsorption isotherm models are used to describe the experimental data. The Langmuir model yields a better correlation coefficient than the other model. A comparison of the monolayer adsorption capacity (q{sub m}) of CSH, activated carbon, and several other reported adsorbents has been provided. The value of separation factor (R{sub L}) calculated from the Langmuir equation also gives an indication of favorable adsorption of the metal ion. From comparative studies, it has been found that CSH is a potentially attractive adsorbent than commercial activated carbon for cadmium metal ion (Cd{sup 2+}) removal. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  20. Effect of soybean hulls on lactation curves and the composition of goat milk

    Directory of Open Access Journals (Sweden)

    Maximiliane Alavarse Zambom

    Full Text Available ABSTRACT This study aimed to evaluate the effects of soybean hulls (SBH as a ground corn replacement (0, 50, and 100% SBH on the parameters of the lactation curve and on lactation curves and milk composition. Fourteen multiparous Saanen goats were used during their lactation period, from kidding until the drying of their milk on the 228th day of lactation, and were distributed in a completely randomised design. The data was analysed using Bayesian methodology to minimise the effect of the low number of animals and to allow for comparison of the curve parameters estimated by Wood's nonlinear model. The SBH had no effect on the initial milk yield; nevertheless, the SBH reduced the rate of yield until lactation peak and accelerated the declining rate of yield after lactation. The treatments did not affect dry matter intake. The inclusion of SBH increased the fat content in the milk, which was also influenced by the lactation stage of the goats. Effects were observed on polyunsaturated fatty acids (PUFA, PUFA/total AG ratio, and the n-6:n-3 ratio of goat milk fat. The lactation stage changed the content of saturated fatty acid, monounsaturated fatty acid, and C18:2 (conjugated linoleic acid. The SBH can therefore be used as a ground corn replacement in the diets of lactating goats, as changes in the lactation curve parameters did not result in changes in total yields. Nevertheless, if the milk fat increases, then as quality rises, so could payment by quality, and thus an increase in profit margins per liter of milk sold.

  1. Development of a hull-less pumpkin (Cucurbita pepo L.) seed oil press-cake spread.

    Science.gov (United States)

    Radočaj, Olga; Dimić, Etelka; Vujasinović, Vesna

    2012-09-01

    A stable, oil-based spread rich in the omega-3 (ω-3) and omega-6 (ω-6) fatty acids was developed using a hull-less pumpkin seed (Cucurbita pepo L.) oil press-cake, a by-product of the pumpkin oil pressing process, along with cold-pressed hemp oil. Response surface methodology (RSM) was applied to investigate the effects of two factors, as the formulation's compositional variables: a commercial stabilizer (X(1) ) and cold-pressed hemp oil (X(2) ) added to the pumpkin seed oil press-cake in the spread formulations. A central composite, 2-factorial experimental design on 5 levels was used to optimize the spreads where model responses were ω-3 fatty acids content, spreadability (hardness), oil separation, and sensory evaluation. The selected responses were significantly affected by both variables (P oil separation after 1 mo of storage. An optimum spread was produced using 1.25% (w/w) of stabilizer and 80% of hemp oil (w/w, of the total added oil) which had 0.97 g of ω-3 fatty acids per serving size; penetration depth of 68.4 mm; oil separation of 9.2% after 3 mo of storage; and a sensory score of 17.5. A use of by-products generated from different food processing technologies, where the edible waste is successfully incorporated as a value-added ingredient, has become a very important area of research to support global sustainability efforts. This study contributes to the knowledge of a product design process for oil-based spread development, where oil press-cake, a by-product of the oil pressing process of the naked pumpkin seeds, was used and where results have demonstrated that a new product can be successfully developed and potentially manufactured as a functional food. © 2012 Institute of Food Technologists®

  2. The Strength Compass

    DEFF Research Database (Denmark)

    Ledertoug, Mette Marie

    present in both small children and youths? Gender: Do the results show differences between the two genders? Danish as a mother- tongue language: Do the results show any differences in the strengths display when considering different language and cultural backgrounds? Children with Special Needs: Do...

  3. A Hull cell study of a NiW electrolyte and evaluation of its properties; Estudio en celula Hull de un bano electrolitico de NiW y evaluacion de sus propiedades

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Urrutia, I.; Diez, J. A.; Muller, C.; Calvillo, P.

    2009-07-01

    Interest in NiW coatings has grown in recent years due to its favourable properties such as hardness, and resistance to both wear and corrosion, making it one of the actual alternatives to hard chromium coatings. In this work, we have undertaken a Hull cell study, investigating the influence of the metal concentration, temperature, pH and current density on the composition of the alloy formed and its thickness. We have also studied the most important properties of the NiW deposits, including morphology, hardness, and resistance to abrasion and corrosion. (Author) 9 refs.

  4. Raw hulled shredded acorns from Downy Oak (Quercus pubescens) in the diet of pigs: effects on digestibility and faeces characteristics.

    Science.gov (United States)

    Cappai, M G; Wolf, P; Rust, P; Pinna, W; Kamphues, J

    2013-05-01

    Faeces quality and composition are both of interest to veterinary practitioners dealing with pigs' health and disturbances in the alimentary tract, especially in free-range situations. In the Mediterranean basin, acorns are used as a starch source for fattening pigs, yet little information is available on how that affects faecal quality and digestibility. Therefore, a combined diet containing ripe hulled shredded acorns vs. a pelleted complete diet for finishers was evaluated for the digestibility and faecal consistency. The trial involved eight crossbred pigs, and a matched-pair approach was used to divide animals into two groups, which were fed with two different diets: acorns group (A): n = 4, 70% ripe hulled shredded acorns + 30% pelleted complete diet combined, as fed; control group (C): n = 4, 100% pelleted complete feed. The pigs were housed individually and fed the experimental diets for 8 days; daily feed intake and faeces amounts were recorded and faeces quality assessed. The digestibility of organic matter (OM) and starch of the two diets, as well as of pure acorns, were calculated and compared. Daily feed consumption was significantly higher in group A, but the mean dry matter intake (DMI) per pig was similar in both groups. Dark, firm and consistent faeces were reported for each pig from group A in comparison with group B, whose faeces were paler and softer. Digestibility of OM and starch were lower in group A than in group B (67.8 ± 3.4 vs. 83.9 ± 1.1 and 82.5 ± 3.4 vs. 92.3 ± 2.1 respectively): total tract digestibility of native starch from pure acorns was calculated at 77%. The peculiar consistency of faeces was related to macroscopic acorn hulls, constantly detected in the faeces of all animals sampled in group A. Journal of Animal Physiology and Animal Nutrition © 2013 Blackwell Verlag GmbH.

  5. Convergence analysis of two-phase methods for approximating the Edgeworth-Pareto hull in nonlinear multicriteria optimization problems

    Science.gov (United States)

    Berezkin, V. E.; Kamenev, G. K.

    2012-06-01

    The convergence of two-phase methods for approximating the Edgeworth-Pareto hull (EPH) in nonlinear multicriteria optimization problems is analyzed. The methods are based on the iterative supplement of the finite set of feasible criteria vectors (approximation basis) whose EPH approximates the desired set. A feature of two-phase methods is that the criteria images of randomly generated points of the decision space approach the Pareto frontier via local optimization of adaptively chosen convolutions of criteria. The convergence of two-phase methods is proved for both an abstract form of the algorithm and for a two-phase method based on the Germeier convolution.

  6. Matching theory

    CERN Document Server

    Lovász, László

    2009-01-01

    This book surveys matching theory, with an emphasis on connections with other areas of mathematics and on the role matching theory has played, and continues to play, in the development of some of these areas. Besides basic results on the existence of matchings and on the matching structure of graphs, the impact of matching theory is discussed by providing crucial special cases and nontrivial examples on matroid theory, algorithms, and polyhedral combinatorics. The new Appendix outlines how the theory and applications of matching theory have continued to develop since the book was first publish

  7. Addition of oat hulls to an extruded rice-based diet for weaner pigs ameliorates the incidence of diarrhoea and reduces indices of protein fermentation in the gastrointestinal tract.

    Science.gov (United States)

    Kim, Jae Cheol; Mullan, Bruce P; Hampson, David J; Pluske, John R

    2008-06-01

    An experiment was conducted to determine whether adding oat hulls to weaner pig diets based on extruded rice or unprocessed wheat influenced post-weaning diarrhoea (PWD) and protein fermentation in the large intestine. Ninety-six male piglets (5.16 (SEM 0.08) kg) were allocated to (i) extruded rice plus animal proteins (RAP); (ii) RAP with added oat hulls (20 g/kg); (iii) wheat plus animal proteins (WAP); (iv) WAP with added oat hulls (20 g/kg). Blood and faecal samples were collected on days 7 and 14 after weaning at about age 21 d. Pigs fed RAP had more PWD than pigs fed WAP (P Oat hull supplementation to diet RAP decreased the incidence of PWD (P digestibility of DM, starch and energy was higher in rice-based diets than in wheat-based diets (P oat hulls decreased digestibility of DM and gross energy (P oat hulls decreased plasma urea concentrations only in pigs fed RAP (interaction; P Oat hull supplementation tended to decrease total biogenic amine concentrations (P = 0.103). These data indirectly suggest that a mostly insoluble dietary fibre source such as oat hulls can decrease PWD in dietary situations where there may be a misbalance of carbohydrate to protein entering the hindgut.

  8. Nonlinear theory of transverse beam echoes

    OpenAIRE

    Sen, Tanaji; Li, Yuan Shen

    2017-01-01

    Transverse beam echoes can be excited with a single dipole kick followed by a single quadrupole kick. They have been used to measure diffusion in hadron beams and have other diagnostic capabilities. Here we develop theories of the transverse echo nonlinear in both the dipole and quadrupole kick strengths. The theories predict the maximum echo amplitudes and the optimum strength parameters. We find that the echo amplitude increases with smaller beam emittance and the asymptotic echo amplitude ...

  9. A Comparative Analysis of Three Unique Theories of Organizational Learning

    Science.gov (United States)

    Leavitt, Carol C.

    2011-01-01

    The purpose of this paper is to present three classical theories on organizational learning and conduct a comparative analysis that highlights their strengths, similarities, and differences. Two of the theories -- experiential learning theory and adaptive -- generative learning theory -- represent the thinking of the cognitive perspective, while…

  10. Aerodynamic and Hydrodynamic Tests of a Family of Models of Flying Hulls Derived from a Streamline Body -- NACA Model 84 Series

    Science.gov (United States)

    Parkinson, John B; Olson, Roland E; Draley, Eugene C; Luoma, Arvo A

    1943-01-01

    A series of related forms of flying-boat hulls representing various degrees of compromise between aerodynamic and hydrodynamic requirements was tested in Langley Tank No. 1 and in the Langley 8-foot high-speed tunnel. The purpose of the investigation was to provide information regarding the penalties in water performance resulting from further aerodynamic refinement and, as a corollary, to provide information regarding the penalties in range or payload resulting from the retention of certain desirable hydrodynamic characteristics. The information should form a basis for over-all improvements in hull form.

  11. Topos theory

    CERN Document Server

    Johnstone, PT

    2014-01-01

    Focusing on topos theory's integration of geometric and logical ideas into the foundations of mathematics and theoretical computer science, this volume explores internal category theory, topologies and sheaves, geometric morphisms, other subjects. 1977 edition.

  12. Strengths only or strengths and relative weaknesses? A preliminary study.

    Science.gov (United States)

    Rust, Teri; Diessner, Rhett; Reade, Lindsay

    2009-10-01

    Does working on developing character strengths and relative character weaknesses cause lower life satisfaction than working on developing character strengths only? The present study provides a preliminary answer. After 76 college students completed the Values in Action Inventory of Strengths (C. Peterson & M. E. P. Seligman, 2004), the authors randomly assigned them to work on 2 character strengths or on 1 character strength and 1 relative weakness. Combined, these groups showed significant gains on the Satisfaction With Life Scale (E. Diener, R. A. Emmons, R. J. Larsen, & S. Griffin, 1985), compared with a 32-student no-treatment group. However, there was no significant difference in gain scores between the 2-strengths group and the 1-character-strength-and-1-relative-character-weakness group. The authors discuss how focusing on relative character weaknesses (along with strengths) does not diminish-and may assist in increasing-life satisfaction.

  13. Grounded theory

    OpenAIRE

    Harris, Tina

    2014-01-01

    Grounded theory is a popular research approach in health care and the social sciences. This article provides a description of grounded theory methodology and its key components, using examples from published studies to demonstrate practical application. It aims to demystify grounded theory for novice nurse researchers, by explaining what it is, when to use it, why they would want to use it and how to use it. It should enable nurse researchers to decide if grounded theory is an appropriate app...

  14. Experimental Investigation of the Strength of Damaged Pressure Hulls - Phases 5 & 6: The Influence of Out-of-Circularity on Collapse

    Science.gov (United States)

    2011-03-01

    d’ovalisation des cylindres. Le champ de contrainte résiduelle s’inscrivait dans la zone d’élasticité du matériau et les analyses subséquentes de...Mars 2011. Introduction : Les gouvernements du Canada et des Pays-Bas ont conjointement commandité un programme d’expérimentation visant à...convergence studies for finite element analyses of test specimens ................. 419 List of symbols/abbreviations/acronyms/initialisms

  15. Underway sensing of radiometric properties utilizing a novel sub-hull installation on R/V SONNE

    Science.gov (United States)

    Zielinski, O.; Rüssmeier, N.; Garaba, S. P.; Voss, D.

    2016-12-01

    Understanding light interaction with biogeochemical constituents in the marine environment has improved in the last few years due to small, fast, automated and affordable optical tools. Ocean color observations are dependent on ambient sunlight, wind speed influencing sea surface reflected glint, instrument self shading, sensor accuracy, sensitivity as well as spatial and spectral resolution influencing our abilities in sensing oceanic processes. In this study we present a new method useful in collecting radiometric information, namely upwelling radiance from a platform submerged in a novel hydrographic sub-hull of a research vessel. The information analyzed here was obtained during a recent field campaign in the Northwestern European shelf seas aboard the new German research vessel SONNE. A comparison of the measurements from this approach with a free falling hyperspectral profiler was conducted to determine the degree of uncertainty that results from ship shadow. We observed intensity deviations in a range of about 30% compared to profiling measurements, which can be attributed to instrument shading and environmental perturbations. A form-fitting algorithm was adapted to receive corresponding depths with identical spectral shape indicating an equivalent light path of 22 m for the sub-hull installation. Remote sensing reflectance was then calculated by normalizing the upwelling radiance with the downward solar irradiance. During an east to west transect in the North Sea we successfully applied the above method while cruising at a maximum speed up of 12 knots, resolving the mixing zone of CDOM (colored dissolved organic matter) dominant Baltic waters towards the open North Sea.

  16. Bioavailability of zinc from defatted soy flour, soy hulls and whole eggs as determined by intrinsic and extrinsic labeling techniques.

    Science.gov (United States)

    Meyer, N R; Stuart, M A; Weaver, C M

    1983-06-01

    Bioavailability of zinc from diets prepared from intrinsically and extrinsically labeled autoclaved, defatted soy flour and scrambled, freeze-dried egg was investigated in male rats marginally depleted in zinc. In one study, retention of zinc from intrinsically labeled soybean flour (73%) was significantly less than from 65ZnCl2 extrinsically added to a soy flour-based diet (80%). Zinc from intrinsically labeled soybean hulls and from soy flour diets containing 10% soybean hulls extrinsically labeled with 65ZnCl2 was as available as the zinc from the extrinsically labeled soy flour diet. In a second study, extrinsic and intrinsic labeling techniques gave a similar assessment of bioavailability of zinc from egg- and soy flour-based diets when extrinsic labeling was accomplished by thoroughly mixing 65ZnCl2 with the protein source prior to incorporation into the diet. Absorption of 65Zn was greater from egg diets than from soy flour diets and of intermediate value from mixed soy flour and egg (50:50, wt/wt) diets regardless of which protein source was labeled, indicating that the zinc entered a common pool.

  17. An Analysis of Wind Power Development in the Town of Hull, MA, Appendix 2: LaCapra Financial Study

    Energy Technology Data Exchange (ETDEWEB)

    Adams, Christopher

    2013-06-30

    The financial analysis and summary results presented in this document represent a first cut at an economic assessment of the proposed Hull Offshore Wind Project. Wind turbine price increases have outpaced the materials and labor price pressures faced by nonrenewable power plant developers due to increased demands on a limited pool of turbine manufacturers and offshore installation companies. Moreover, given the size of the proposed offshore facility, it may be difficult to contract with turbine manufacturers and/or foundation companies given the size and scope of competing worldwide demand. The results described in this report assume that such conditions will not significantly impact the prices that will have to be received from the output of the project; rather, the project size may require as a prerequisite that Hull be able to piggyback on other offshore efforts. The financial estimates provided here necessarily feature a range due to uncertainty in a number of project assumptions as well as overall uncertainty in offshore wind costs. Nevertheless, taken together, the analysis provides a ballpark revenue requirement of approximately $157/MWh for the municipal financing option, with higher estimates possible assuming escalation in costs to levels higher than assumed here.

  18. DETERMINATION OF RELATIONAL CLASSIFICATION AMONG HULL FORM PARAMETERS AND SHIP MOTIONS PERFORMANCE FOR A SET OF SMALL VESSELS

    Directory of Open Access Journals (Sweden)

    Ayla Sayli

    2016-08-01

    Full Text Available Data science for engineers is the most recent research area which suggests to analyse large data sets in order to find data analytics and use them for better designing and modelling. Ship design practice reveals that conceptual ship design is critically important for a successful basic design. Conceptual ship design needs to identify the true set of design variables influencing vessel performance and costs to define the best possible basic design by the use of performance prediction model. This model can be constructed by design engineers. The main idea of this paper comes from this crucial idea to determine relational classification of a set of small vessels using their hull form parameters and performance characteristics defined by transfer functions of heave and pitch motions and of absolute vertical acceleration, by our in-house software application based on K-Means algorithm from data mining. This application is implemented in the C# programming language on Microsoft SQL Server database. We also use the Elbow method to estimate the true number of clusters for K-Means algorithm. The computational results show that the considered set of small vessels can be clustered in three categories according to their functional relations of their hull form parameters and transfer functions considering all cases of three loading conditions, seven ship speeds as non-dimensional Froude numbers (Fn and nine wave-length to ship-length values (λ/L.

  19. Crude soybean hull peroxidase treatment of phenol in synthetic and real wastewater: enzyme economy enhanced by Triton X-100.

    Science.gov (United States)

    Steevensz, Aaron; Madur, Sneha; Feng, Wei; Taylor, Keith E; Bewtra, Jatinder K; Biswas, Nihar

    2014-02-05

    Soybean peroxidase (SBP)-catalyzed removal of phenol from wastewater has been demonstrated as a feasible wastewater treatment strategy and a non-ionic surfactant, Triton X-100, has the potential for increasing the enzyme economy of the process. Systematic studies on the enzyme-surfactant system have been lacking as well as demonstration of its applicability to industrial wastewater. This paper addresses those two gaps, the latter based on real wastewater from alkyd resin manufacture. The minimum effective Triton X-100 concentrations for crude SBP-catalyzed phenol conversion (≥95%) over 1-10 mM showed a linear trend. To illustrate translation of such lab results to real-world samples, this data were used to optimize crude SBP needed for phenol conversion over that concentration range. Triton X-100 increases enzyme economy by 10- to 13-fold. This treatment protocol was directly applied to tote-scale (700-1000 L) treatment of alkyd resin wastewater, with phenol ranging from 7 to 28 mM and total organic carbon content of >40 g/L, using a crude SBP extract derived from dry soybean hulls by simple aqueous elution. This extract can be used to remove phenol from a complex industrial wastewater and the process is markedly more efficient in the presence of Triton X-100. The water is thus rendered amenable to conventional biological treatment whilst the hulls could still be used in feed, thus adding further value to the crop. Copyright © 2013 Elsevier Inc. All rights reserved.

  20. CudaPre3D: An Alternative Preprocessing Algorithm for Accelerating 3D Convex Hull Computation on the GPU

    Directory of Open Access Journals (Sweden)

    MEI, G.

    2015-05-01

    Full Text Available In the calculating of convex hulls for point sets, a preprocessing procedure that is to filter the input points by discarding non-extreme points is commonly used to improve the computational efficiency. We previously proposed a quite straightforward preprocessing approach for accelerating 2D convex hull computation on the GPU. In this paper, we extend that algorithm to being used in 3D cases. The basic ideas behind these two preprocessing algorithms are similar: first, several groups of extreme points are found according to the original set of input points and several rotated versions of the input set; then, a convex polyhedron is created using the found extreme points; and finally those interior points locating inside the formed convex polyhedron are discarded. Experimental results show that: when employing the proposed preprocessing algorithm, it achieves the speedups of about 4x on average and 5x to 6x in the best cases over the cases where the proposed approach is not used. In addition, more than 95 percent of the input points can be discarded in most experimental tests.

  1. Ultimate strength analysis of thin plated structures using eigen-functions. 3rd Report. Application to reliability analysis; Koyu kansu wo mochiita usuita kozobutsu no dansosei kaisekiho. 3. Shinraisei kaiseki eno oyo

    Energy Technology Data Exchange (ETDEWEB)

    Ueda, Y. [Osaka University, Osaka (Japan). Welding Research Institute; Masaoka, K.; Okada, H. [University of Osaka Prefecture, Osaka (Japan). Faculty of Engineering

    1996-12-31

    A reliability analysis was performed on ultimate strength of a hull by introducing reliability engineerings into the idealized structural unit method. Elements developed under the present study were applied to a model of an actual structure to indicate that even an analysis requiring much time under the finite element method can be performed in a short time and at high accuracy when this method is used. Analysis acted with bending moment and shear force simultaneously was performed on a model used as a structure in experiments carried out by Nishihara, assuming pure bending moment and longitudinal strength during slamming. Then, a reliability analysis was conducted on the same model based on this analysis method to investigate the ultimate strength. In an analysis of an ultimate strength when bending and shearing that assume slamming act upon simultaneously, axial force in the hull side decreases as loading increases, wherein how the shearing force increases can be identified clearly. Although existence of initial bends reduces the strength, the effect of variance in the vicinity of the average value on the reliability is rather small, while the effect due to variance in yield stress is greater. 27 refs., 14 figs., 4 tabs.

  2. Ring theory

    CERN Document Server

    Rowen, Louis H

    1991-01-01

    This is an abridged edition of the author's previous two-volume work, Ring Theory, which concentrates on essential material for a general ring theory course while ommitting much of the material intended for ring theory specialists. It has been praised by reviewers:**""As a textbook for graduate students, Ring Theory joins the best....The experts will find several attractive and pleasant features in Ring Theory. The most noteworthy is the inclusion, usually in supplements and appendices, of many useful constructions which are hard to locate outside of the original sources....The audience of non

  3. Atomic theories

    CERN Document Server

    Loring, FH

    2014-01-01

    Summarising the most novel facts and theories which were coming into prominence at the time, particularly those which had not yet been incorporated into standard textbooks, this important work was first published in 1921. The subjects treated cover a wide range of research that was being conducted into the atom, and include Quantum Theory, the Bohr Theory, the Sommerfield extension of Bohr's work, the Octet Theory and Isotopes, as well as Ionisation Potentials and Solar Phenomena. Because much of the material of Atomic Theories lies on the boundary between experimentally verified fact and spec

  4. Grounded theory.

    Science.gov (United States)

    Harris, Tina

    2015-04-29

    Grounded theory is a popular research approach in health care and the social sciences. This article provides a description of grounded theory methodology and its key components, using examples from published studies to demonstrate practical application. It aims to demystify grounded theory for novice nurse researchers, by explaining what it is, when to use it, why they would want to use it and how to use it. It should enable nurse researchers to decide if grounded theory is an appropriate approach for their research, and to determine the quality of any grounded theory research they read.

  5. Number theory via Representation theory

    Indian Academy of Sciences (India)

    2014-11-09

    Number theory via Representation theory. Eknath Ghate. November 9, 2014. Eightieth Annual Meeting, Chennai. Indian Academy of Sciences1. 1. This is a non-technical 20 minute talk intended for a general Academy audience.

  6. Theory Testing Using Case Studies

    DEFF Research Database (Denmark)

    Møller, Ann-Kristina Løkke; Dissing Sørensen, Pernille

    2014-01-01

    testing using case studies, including the associated research goal, analysis, and generalisability. We argue that research designs for theory testing using case studies differ from theorybuilding case study research designs because different research projects serve different purposes and follow different......The appropriateness of case studies as a tool for theory testing is still a controversial issue, and discussions about the weaknesses of such research designs have previously taken precedence over those about its strengths. The purpose of the paper is to examine and revive the approach of theory...... research paths....

  7. Spall Strength Measurements in Transparent Epoxy Polymers

    Science.gov (United States)

    Pepper, Jonathan; Rahmat, Meysam; Petel, Oren

    2017-06-01

    Polymer nanocomposites are seeing more frequent use in transparent armour applications. The role of the microstructure on the performance of these materials under dynamic tensile loading conditions is of particular interest. In the present study, a series of plate impact experiments was conducted in order to evaluate the dynamic response of an epoxy (EPON 828) cured with two differed hardeners. The purpose was to compare the role of these hardeners on the dynamic performance of the resulting transparent epoxy. The material response was resolved with a multi-channel photonic Doppler velocimeter. This system was used to determine the shock Hugoniot and dynamic tensile (spall) strength of the materials. The experimental results are presented in reference to spall theory and are evaluated against results predicted by an analytical model of the impacts. While varying the hardener did not change the shock Hugoniot of the epoxy, it did have an effect on the measured spall strengths.

  8. Calculating Outsourcing Strategies and Trials of Strength

    DEFF Research Database (Denmark)

    Christensen, Mark; Skærbæk, Peter; Tryggestad, Kjell

    . The alternative option was an immediate outsourcing strategy with facility services being the object of large cross-functional contracts for all Danish military establishments. By succeeding in presenting ‘internal optimization’ as an outsourcing option (as opposed to the usual ‘make’ option) this case...... demonstrates the power of projects and their use of accounting calculation. We study how the two options emerged and were valued differently by the supra-national outsourcing program and the local Defense projects over 22 years and how that valuation process involved accounting. Drawing on Actor-Network Theory...... outsourcing strategies during a series of trials of strength, 2. develops the concept of ‘trial of strength’ for accounting and organization research by showing how ‘the rules of the game’ for the trials of strength can become challenged and controversial, 3. shows that, in addition to the pervasive role...

  9. Strength Development for Young Adolescents

    Science.gov (United States)

    McDaniel, Larry W.; Jackson, Allen; Gaudet, Laura

    2009-01-01

    Participation in strength training is important for older children or young adolescences who wish to improve fitness or participate in sports. When designing strength training programs for our youth this age group is immature anatomically, physiologically, and psychologically. For the younger or inexperienced group the strength training activities…

  10. Changes to Tensile Strength and Electromagnetic Shielding Effectiveness in Neutron Irradiated Carbon Nanocomposites

    Science.gov (United States)

    2013-03-01

    compatibility ( EMC ) industry uses a wave theory approach to shielding theory, which uses abstract mathematical modeling techniques to yield a value of...2012. [Online]. Available: http://www.spira_emi.com/theory.htm. [Accessed 14 11 2012]. [22] “ Shielding Theory”, Learn EMC , 2012. [Online...CHANGES TO TENSILE STRENGTH AND ELECTROMAGNETIC SHIELDING EFFECTIVENESS IN NEUTRON IRRADIATED

  11. The fracture strength and frictional strength of Weber Sandstone

    Science.gov (United States)

    Byerlee, J.D.

    1975-01-01

    The fracture strength and frictional strength of Weber Sandstone have been measured as a function of confining pressure and pore pressure. Both the fracture strength and the frictional strength obey the law of effective stress, that is, the strength is determined not by the confining pressure alone but by the difference between the confining pressure and the pore pressure. The fracture strength of the rock varies by as much as 20 per cent depending on the cement between the grains, but the frictional strength is independent of lithology. Over the range 0 2 kb, ??=0??5 + 0??6??n. This relationship also holds for other rocks such as gabbro, dunite, serpentinite, granite and limestone. ?? 1975.

  12. The ideal strength of iron in tension and shear

    Energy Technology Data Exchange (ETDEWEB)

    Clatterbuck, D.M.; Chrzan, D.C.; Morris, Jr., J.W.

    2002-12-01

    The ideal strength of a material is the stress at which the lattice itself becomes unstable and, hence, sets a firm upper bound on the mechanical strength the material can have. The present paper includes an ab-initio calculation of the ideal shear strength of Fe. It is, to our knowledge, the first such computation for any ferromagnetic material. The paper also elaborates on our earlier calculation of the ideal tensile strength of Fe by studying the effects of strains which break the tetragonal symmetry. The strengths were calculated using the Projector Augmented Wave Method within the framework of density functional theory and the generalized gradient approximation. In <001> tension the ideal strength is determined by an elastic instability of the ferromagnetic phase along the ''Bain'' strain path from bcc to fcc. An <001> tensile strain also leads to instability with respect to transformation into a face centered orthorhombic structure, and to various magnetic instabilities. However, these are encountered at larger strains and, thus, do not affect the ideal strength. We also investigated the ideal shear strength of bcc iron in two prominent shear systems, <111>{l_brace}112{r_brace} and <111>{l_brace}110{r_brace}. In both shear systems the ideal strength is determined by the body centered tetragonal structure that defines a nearby saddle point on the energy surface. The ideal shear strengths are thus very similar, though they are not identical since the two shears follow slightly different strain paths from bcc to bct. We investigated the magnetic instabilities encountered during <111>{l_brace}112{r_brace} shear. These instabilities do not appear until the strain is significantly greater than the instability strain of the ferromagnetic crystal. Hence while Fe exhibits some novel effects due to magnetism, they do not affect the ideal strength, which is determined by the same elastic instabilities that determine the strengths of most other bcc

  13. Apparent protein digestibility and recovery of endogenous nitrogen at the terminal ileum of pigs fed diets containing various soyabean products, peas or rapeseed hulls

    NARCIS (Netherlands)

    Grala, W.; Verstegen, M.W.A.; Jansman, A.J.M.; Huisman, J.; Leeuwen, P. van

    1999-01-01

    Effects of the use of three different soyabean products (soya concentrate and two different soyabean meals), peas or rapeseed hulls in the diet on the apparent ileal digestibility of CP (N x 6.25) and recovery of ileal endogenous nitrogen (N) in weanling pigs were investigated. Ileal endogenous N

  14. Isotherm Studies of Equilibrium Sorption of Cu2+ and Cd2+ from Aqueous Solutions by Modified and Unmodified Breadfruit Seed Hull

    Directory of Open Access Journals (Sweden)

    Christopher Uchechukwu Sonde

    2015-09-01

    Full Text Available The ability of an economically cheap adsorbent material of natural origin, African breadfruit seed hull, was assessed for Cu(II and Cd(II ions’ adsorption from aqueous solutions. The effects of adsorbent dose, particle size and initial metal ion concentrations were investigated in a batch adsorption process. The experimental data were analyzed using five two-parameter isotherm equations (i.e., Langmuir, Freundlich, Temkin, Harkins-Jura and Halsey isotherm models. Freundlich and Halsey models provided the best description for the adsorption data while the other three models gave fairly good interpretation to the experimental adsorption data. The maximum adsorption capacity corresponding to saturation of sites (qmax, obtained from the Langmuir plots, were 7.76 and 8.06 mg g-1 for Cu(II and Cd(II onto the unmodified breadfruit seed hull (UBSH and 12.67 and 13.97 mg g-1, respectively for Cu(II and Cd(II adsorption onto the modified breadfruit seed hull (MBSH. The experimental results showed that there was an enhancement in the removal of the metal ions by the mercaptoacetic acid-modified breadfruit seed hull. DOI: http://dx.doi.org/10.17807/orbital.v7i3.625 

  15. Hydrodynamic Tests of a 1/10-size Model of the Hull of the Latecoere 521 Flying Boat : NACA Model 83

    Science.gov (United States)

    Olson, Roland E; Lina, Lindsay J

    1941-01-01

    A 1/10-size model of the hull of the French flying boat Latecoere 521 was tested in the NACA tank. This model is one of a series of models of the hulls of actual flying boats of both foreign and domestic type that are being tested in the NACA tank to provide information regarding the water characteristics of a variety of forms of hull and to illustrate the development of present-day types of flying boat. The lines and the offsets of the hull were obtained from the manufacturer through the Paris office of the NACA. The form of the stub-wing stabilizers was not furnished and, therefore, the model was tested without them. The model was tested free to trim at the design initial load (initial load coefficient of 0.428) and by the general method at load coefficients from 0.025 to 0.6. The spray characteristics of the model are good. The form of the bow would be particularly desirable for rough water use. The interference of the afterbody and the tail extension is excessive, causing very high resistance at high speeds. A violent vertical instability is present at trims of 4 degrees and 6 degrees with light loads and high speeds.

  16. Some tours are more equal than others : The convex-hull model revisited with lessons for testing models of the Traveling Salesperson Problem

    NARCIS (Netherlands)

    Tak, S.; Plaisier, M.; Rooij, I.J.E.I. van

    2008-01-01

    To explain human performance on the Traveling Salesperson problem (TSP), MacGregor, Ormerod, and Chronicle (2000) proposed that humans construct solutions according to the steps described by their convex-hull algorithm. Focusing on tour length as the dependent variable, and using only random or

  17. Some Tours Are More Equal than Others: The Convex-Hull Model Revisited with Lessons for Testing Models of the Traveling Salesperson Problem

    Science.gov (United States)

    Tak, Susanne; Plaisier, Marco; van Rooij, Iris

    2008-01-01

    To explain human performance on the "Traveling Salesperson" problem (TSP), MacGregor, Ormerod, and Chronicle (2000) proposed that humans construct solutions according to the steps described by their convex-hull algorithm. Focusing on tour length as the dependent variable, and using only random or semirandom point sets, the authors…

  18. Physically (CO2) activated hydrochars from hickory and peanut hull: preparation, characterization, and sorption of methylene blue, lead, copper, and cadmium

    Science.gov (United States)

    The effects of carbon dioxide activation temperature (600-900 degree Celsius °C) and time (1 and 2 h) on the physicochemical and sorptive characteristics of hickory and peanut hull hydrochars were investigated. The extent of burn-off increased with increasing activation times and temperatures, and r...

  19. The effects of steroid implant and dietary soybean hulls on estrogenic activity of sera of steers grazing toxic endophyte-infected tall fescue pasture

    Science.gov (United States)

    Soybean hulls (SBHs), a co-product of soybean meal milling, have been fed to cattle pasturing on endophyte-infected tall fescue in attempts to increase rate of gain. Literature reports indicated some symptoms associated with fescue toxicosis were ameliorated by the use of steroidal implants contain...

  20. Theory testing using case studies

    DEFF Research Database (Denmark)

    Dissing Sørensen, Pernille; Løkke Nielsen, Ann-Kristina

    Case studies may have different research goals. One such goal is the testing of small-scale and middle-range theories. Theory testing refers to the critical examination, observation, and evaluation of the 'why' and 'how' of a specified phenomenon in a particular setting. In this paper, we focus...... on the strengths of theory-testing case studies. We specify research paths associated with theory testing in case studies and present a coherent argument for the logic of theoretical development and refinement using case studies. We emphasize different uses of rival explanations and their implications for research...... design. Finally, we discuss the epistemological logic, i.e., the value to larger research programmes, of such studies and, following Lakatos, conclude that the value of theory-testing case studies lies beyond naïve falsification and in their contribution to developing research programmes in a progressive...

  1. On strength of porous material

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    1999-01-01

    The question of non-destructive testing of porous materials has always been of interest for the engineering profession. A number of empirically based MOE-MOR relations between stiffness (Modulus Of Elasticity) and strength (Modulus OF Rupture) of materials have been established in order to control...... to the theoretical research on non-destructive testing of such materials relating strength to stiffness and pore geometry.It is demonstrated that solutions for stiffness, tensile strength, and pore strength (damaging pore pressure, frost, fire) for some ideal porous materials can be determined theoretically only...... from knowing about pore geometry, solid phase stiffness, and zero-porosity strength. Pore geometry is the very important common denominator which controls both both stiffness and strength.The accurate results obtained are finally used to suggest generalizations with respect to strength in general...

  2. Viability Theory

    CERN Document Server

    Aubin, Jean-Pierre; Saint-Pierre, Patrick

    2011-01-01

    Viability theory designs and develops mathematical and algorithmic methods for investigating the adaptation to viability constraints of evolutions governed by complex systems under uncertainty that are found in many domains involving living beings, from biological evolution to economics, from environmental sciences to financial markets, from control theory and robotics to cognitive sciences. It involves interdisciplinary investigations spanning fields that have traditionally developed in isolation. The purpose of this book is to present an initiation to applications of viability theory, explai

  3. Model theory

    CERN Document Server

    Chang, CC

    2012-01-01

    Model theory deals with a branch of mathematical logic showing connections between a formal language and its interpretations or models. This is the first and most successful textbook in logical model theory. Extensively updated and corrected in 1990 to accommodate developments in model theoretic methods - including classification theory and nonstandard analysis - the third edition added entirely new sections, exercises, and references. Each chapter introduces an individual method and discusses specific applications. Basic methods of constructing models include constants, elementary chains, Sko

  4. Participants' perceptions of a lifestyle approach to promoting physical activity: targeting deprived communities in Kingston-Upon-Hull

    Directory of Open Access Journals (Sweden)

    Sleap Mike

    2006-08-01

    Full Text Available Abstract Background The health benefits of an active lifestyle have been extensively documented and generally accepted. In the UK, declining physical activity levels are a major contributing factor to a number of public health concerns such as obesity and coronary heart disease. Clearly, there is an urgent need to support people in developing sustainable active lifestyles. In 2003, a new lifestyle-based physical activity service called Active Lifestyles (AL was set up in Kingston-upon-Hull to help local residents to become more active and develop healthier lifestyles. The service targeted the most deprived communities in the city. The aim of the study was to explore participants' perceptions of the operation and effectiveness of the AL service. Methods Five focus groups were conducted in community centres and offices in the health promotion service in Kingston-upon-Hull. Sixteen white adult males (n = 5 and females (n = 11 participated in the study. Ages ranged from 15–73 years (mean age = 53 years. Data were analysed using a content analysis technique based on the 'framework' approach. Results Three broad themes emerged from the focus groups; the referral process; operational aspects of the AL service; and perceived benefits of the service. Overall, participants were extremely positive about the AL service. Many reported increased activity levels, modified eating habits, and enhanced awareness and education regarding healthier living. Most participants reported that local awareness of the AL service was low and greater promotion was required so more people could benefit. The success of the service was highly dependent upon the qualities and approach of the AL advisor. Conclusion The service appears to have filled a gap in service provision since it offered support to the most sedentary, older, unfit and overweight individuals, many of whom live in the most deprived parts of Kingston-upon-Hull. Traditional exercise referral schemes that focus

  5. Participants' perceptions of a lifestyle approach to promoting physical activity: targeting deprived communities in Kingston-upon-Hull.

    Science.gov (United States)

    Wormald, Helen; Waters, Heidi; Sleap, Mike; Ingle, Lee

    2006-08-04

    The health benefits of an active lifestyle have been extensively documented and generally accepted. In the UK, declining physical activity levels are a major contributing factor to a number of public health concerns such as obesity and coronary heart disease. Clearly, there is an urgent need to support people in developing sustainable active lifestyles. In 2003, a new lifestyle-based physical activity service called Active Lifestyles (AL) was set up in Kingston-upon-Hull to help local residents to become more active and develop healthier lifestyles. The service targeted the most deprived communities in the city. The aim of the study was to explore participants' perceptions of the operation and effectiveness of the AL service. Five focus groups were conducted in community centres and offices in the health promotion service in Kingston-upon-Hull. Sixteen white adult males (n = 5) and females (n = 11) participated in the study. Ages ranged from 15-73 years (mean age = 53 years). Data were analysed using a content analysis technique based on the 'framework' approach. Three broad themes emerged from the focus groups; the referral process; operational aspects of the AL service; and perceived benefits of the service. Overall, participants were extremely positive about the AL service. Many reported increased activity levels, modified eating habits, and enhanced awareness and education regarding healthier living. Most participants reported that local awareness of the AL service was low and greater promotion was required so more people could benefit. The success of the service was highly dependent upon the qualities and approach of the AL advisor. The service appears to have filled a gap in service provision since it offered support to the most sedentary, older, unfit and overweight individuals, many of whom live in the most deprived parts of Kingston-upon-Hull. Traditional exercise referral schemes that focus solely on facility-based exercise should be broadened to

  6. Effect of treatment with alkaline hydrogen peroxide associated with extrusion on color and hydration properties of oat hulls

    Directory of Open Access Journals (Sweden)

    Melicia Cintia Galdeano

    2005-01-01

    Full Text Available An incomplete factorial design with three independent variables at three levels of variation was used to evaluate the effect of the treatment with alkaline hydrogen peroxide concomitant with extrusion on some properties of oat hulls. The independent variables were hydrogen peroxide level, feed moisture and extrusion temperature. The dependent variables were water retention capacity (WRC, swollen volume (SV and color. The analysis of variance showed that temperature was the most important variable for the hydration properties. The highest values of WRC and SV were obtained when oat hulls were processed in the condition of 7% hydrogen peroxide, 32% feed moisture and 90ºC extrusion temperature. Modified hulls had a WRC 70% higher and SV 55% higher than the untreated material. The instrumental measure of color was conducted to analyze the modifications promoted due to the treatment in this parameter. The highest value of brightness was obtained with 7% hydrogen peroxide. The modifications in the fibers were accompanied indirectly through hydration properties.Um delineamento fatorial incompleto 3³ foi utilizado para estudar o efeito do tratamento com peróxido de hidrogênio alcalino associado à extrusão sobre algumas propriedades funcionais da fibra da casca de aveia. As variáveis do tratamento avaliadas incluíram teor de peróxido de hidrogênio (%, umidade da amostra (% e temperatura de extrusão (ºC. A análise de variância (ANOVA mostrou que a temperatura foi a variável mais importante para as propriedades de hidratação. Os maiores valores de capacidade de retenção de água (CRA e volume de intumescimento foram obtidos na condição de 7% de peróxido de hidrogênio, 32% de umidade e 90ºC de temperatura, obtendo um incremento de 70% na CRA e 55% no volume de intumescimento. A medida instrumental de cor foi usada para analisar as modificações ocorridas neste parâmetro. O mais alto valor de luminosidade foi alcançado com maior n

  7. Confabulation Theory

    Science.gov (United States)

    Solari, Soren; Smith, Andrew; Minnett, Rupert; Hecht-Nielsen, Robert

    2008-06-01

    Confabulation Theory [Hecht-Nielsen R. Confabulation theory. Springer-Verlag; 2007] is the first comprehensive theory of human and animal cognition. Here, we briefly describe Confabulation Theory and discuss experimental results that suggest the theory is correct. Simply put, Confabulation Theory proposes that thinking is like moving. In humans, the theory postulates that there are roughly 4000 thalamocortical modules, the “muscles of thought”. Each module performs an internal competition ( confabulation) between its symbols, influenced by inputs delivered via learned axonal associations with symbols in other modules. In each module, this competition is controlled, as in an individual muscle, by a single graded (i.e., analog) thought control signal. The final result of this confabulation process is a single active symbol, the expression of which also results in launching of action commands that trigger and control subsequent movements and/or thought processes. Modules are manipulated in groups under coordinated, event-contingent control, in a similar manner to our 700 muscles. Confabulation Theory hypothesizes that the control of thinking is a direct evolutionary outgrowth of the control of movement. Establishing a complete understanding of Confabulation Theory will require launching and sustaining a massive new phalanx of confabulation neuroscience research.

  8. Elastoplasticity theory

    CERN Document Server

    Hashiguchi, Koichi

    2009-01-01

    This book details the mathematics and continuum mechanics necessary as a foundation of elastoplasticity theory. It explains physical backgrounds with illustrations and provides descriptions of detailed derivation processes..

  9. Field theory

    CERN Document Server

    Roman, Steven

    2006-01-01

    Intended for graduate courses or for independent study, this book presents the basic theory of fields. The first part begins with a discussion of polynomials over a ring, the division algorithm, irreducibility, field extensions, and embeddings. The second part is devoted to Galois theory. The third part of the book treats the theory of binomials. The book concludes with a chapter on families of binomials - the Kummer theory. This new edition has been completely rewritten in order to improve the pedagogy and to make the text more accessible to graduate students.  The exercises have also been im

  10. Game theory.

    Science.gov (United States)

    Dufwenberg, Martin

    2011-03-01

    Game theory is a toolkit for examining situations where decision makers influence each other. I discuss the nature of game-theoretic analysis, the history of game theory, why game theory is useful for understanding human psychology, and why game theory has played a key role in the recent explosion of interest in the field of behavioral economics. WIREs Cogni Sci 2011 2 167-173 DOI: 10.1002/wcs.119 For further resources related to this article, please visit the WIREs website. Copyright © 2010 John Wiley & Sons, Ltd.

  11. Water's Hydrogen Bond Strength

    CERN Document Server

    Chaplin, Martin

    2007-01-01

    Water is necessary both for the evolution of life and its continuance. It possesses particular properties that cannot be found in other materials and that are required for life-giving processes. These properties are brought about by the hydrogen bonded environment particularly evident in liquid water. Each liquid water molecule is involved in about four hydrogen bonds with strengths considerably less than covalent bonds but considerably greater than the natural thermal energy. These hydrogen bonds are roughly tetrahedrally arranged such that when strongly formed the local clustering expands, decreasing the density. Such low density structuring naturally occurs at low and supercooled temperatures and gives rise to many physical and chemical properties that evidence the particular uniqueness of liquid water. If aqueous hydrogen bonds were actually somewhat stronger then water would behave similar to a glass, whereas if they were weaker then water would be a gas and only exist as a liquid at sub-zero temperature...

  12. EFFECT OF RICE HULL IN THE DRIED HOTEL FOOD WASTE BASED-DIET ON LIPID CHARACTERISTICS AND MEAT QUALITY OF BARROWS

    Directory of Open Access Journals (Sweden)

    I.M. Purnamartha

    2014-10-01

    Full Text Available The study was constructed to observe the effect of rice hull as a fiber sources in the dried hotelfood waste based-diet on fat and cholesterol level of pork. Twenty four heads of two months old ofLandrace x Yorkshire cross barrows were randomly divided into four treatment groups, i.e. without ricehull (R0, 10% rice hull (R1, 20% rice hull (R2, and 30% rice hull (R3. They placed in individualconcrete pen with 1.9 m in length and 0.5 m in width. Feed and water were given as ad libitum.Observation was done for 10 weeks prior to slaughter. Completely Randomized Design was used in thisstudy. Data obtained was analyzev by anova and mean comparison of Duncan's new Multiple RangeTest. Fat content of R0, R1, R2, dan R3 pork were 14.09±0.31, 13.30±0.44, 12.9±20.30 and11.95±0.56%, respectively. Fat content of pork of R0 was higher (P<0.05 than that of others groups.Cholesterol content of pork of R0, R1, R2 and R3 were 256.47±30.23, 252.34±26.56, 217.63±21.93 and199.21±25.94 mg/100 g, respectively. Cholesterol content of pork of R3 were lower (P<0.05 than thoseof R0. It is concluded that the use of rice hull up to 30% in the dried hotel food waste based-diet candecreases fat and cholesterol levels of pork.

  13. Developing an Asteroid Rotational Theory

    Science.gov (United States)

    Geis, Gena; Williams, Miguel; Linder, Tyler; Pakey, Donald

    2018-01-01

    The goal of this project is to develop a theoretical asteroid rotational theory from first principles. Starting at first principles provides a firm foundation for computer simulations which can be used to analyze multiple variables at once such as size, rotation period, tensile strength, and density. The initial theory will be presented along with early models of applying the theory to the asteroid population. Early results confirm previous work by Pravec et al. (2002) that show the majority of the asteroids larger than 200m have negligible tensile strength and have spin rates close to their critical breakup point. Additionally, results show that an object with zero tensile strength has a maximum rotational rate determined by the object’s density, not size. Therefore, an iron asteroid with a density of 8000 kg/m^3 would have a minimum spin period of 1.16h if the only forces were gravitational and centrifugal. The short-term goal is to include material forces in the simulations to determine what tensile strength will allow the high spin rates of asteroids smaller than 150m.

  14. A Strength-Based Approach to Teacher Professional Development

    Science.gov (United States)

    Zwart, Rosanne C.; Korthagen, Fred A. J.; Attema-Noordewier, Saskia

    2015-01-01

    Based on positive psychology, self-determination theory and a perspective on teacher quality, this study proposes and examines a strength-based approach to teacher professional development. A mixed method pre-test/post-test design was adopted to study perceived outcomes of the approach for 93 teachers of six primary schools in the Netherlands and…

  15. A strength-based approach to teacher professional development

    NARCIS (Netherlands)

    Zwart, Rosanne; Korthagen, Fred A J; Attema-Noordewier, Saskia

    2015-01-01

    Based on positive psychology, self-determination theory and a perspective on teacher quality, this study proposes and examines a strength-based approach to teacher professional development. A mixed method pre-test/post-test design was adopted to study perceived outcomes of the approach for 93

  16. A strength-based approach to teacher professional development

    NARCIS (Netherlands)

    Zwart, Rosanne C.; Korthagen, Fred A J; Attema-Noordewier, Saskia

    2014-01-01

    Based on positive psychology, self-determination theory and a perspective on teacher quality, this study proposes and examines a strength-based approach to teacher professional development. A mixed method pre-test/post-test design was adopted to study perceived outcomes of the approach for 93

  17. The Role of Explicit Need Strength for Emotions during Learning

    Science.gov (United States)

    Flunger, Barbara; Pretsch, Johanna; Schmitt, Manfred; Ludwig, Peter

    2013-01-01

    According to self-determination theory, the satisfaction of the basic needs for autonomy, competence, and relatedness influences achievement emotions and situational interest. The present study investigated whether domain-specific explicit need strength moderated the impact of need satisfaction/dissatisfaction on the outcomes achievement emotions…

  18. A calculation method of cracking moment for the high strength ...

    Indian Academy of Sciences (India)

    Abstract. In this study, a method is given to calculate cracking moments of high strength reinforced concrete beams under the effect of pure torsion. To determine the method, both elastic and plastic theories were used. In this method, dimensions of beam cross-section were considered besides stirrup and longitudinal ...

  19. optimisation of compressive strength of periwinkle shell aggregate

    African Journals Online (AJOL)

    user

    2017-01-01

    Jan 1, 2017 ... Periwinkle shells are abundant in the swampy mud and river banks of the Niger Delta area of Nigeria. The strength property of concrete is a function of the proportions of the various component materials [7-11]. This paper demonstrates the applicability of Scheffe's regression theory to determine the mix ...

  20. Page 1 > Strength and electronic structure 719 (ts). Before the ...

    Indian Academy of Sciences (India)

    (ts). Before the development of the dislocation theory of solids, this problem was of considerable interest because calculated values of the strength were typically greater than experimental values by a factor of 100 or more. Even at the present time, this problem is of theoretical and practical importance, as a knowledge of the ...

  1. A calculation method of cracking moment for the high strength ...

    Indian Academy of Sciences (India)

    In this study, a method is given to calculate cracking moments of high strength reinforced concrete beams under the effect of pure torsion. To determine the method, both elastic and plastic theories were used. In this method, dimensions of beam cross-section were considered besides stirrup and longitudinal reinforcements.

  2. Exploring exercise behavior, intention and habit strength relationships

    NARCIS (Netherlands)

    de Bruijn, G.J.; Rhodes, R.E.

    2011-01-01

    The purpose of this study was to explore the relevance of integrating exercise habit strength within the framework of the theory of planned behavior. Data were obtained from 538 undergraduate students [mean age=21.19 (SD=2.57); 28.4% males] using validated questionnaires and analyzed using

  3. Combustion kinetics of hydrochar produced from hydrothermal carbonisation of Karanj (Pongamia pinnata) fruit hulls via thermogravimetric analysis.

    Science.gov (United States)

    Islam, Md Azharul; Kabir, G; Asif, M; Hameed, B H

    2015-10-01

    This study examined the combustion profile and kinetics of hydrochar produced from hydrothermal carbonisation (HTC) of Karanj fruit hulls (KFH). The HTC-KFH hydrochar combustion kinetics was investigated at 5, 10, and 20°C/min by thermogravimetric analysis. The kinetics model, Kissinger-Akahira-Sunose revealed the combustion kinetics parameters for the extent of conversion from 0.1 to 0.8; the activation energy varies from 114 to 67 kJ/mol respectively. The hydrochar combustion followed multi-steps kinetics; the Coats-Redfern models predicted the activation energies and pre-exponential constants for the hydrochar combustion zones. The diffusion models are the effective mechanism in the second and third zone. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Adsorption Isotherm of Chromium (Vi) into Zncl2 Impregnated Activated Carbon Derived by Jatropha Curcas Seed Hull

    Science.gov (United States)

    Mohammad, M.; Yakub, I.; Yaakob, Z.; Asim, N.; Sopian, K.

    2017-12-01

    Hexavalent chromium is carcinogenic and should be removed from industrial wastewater before discharged into water resources. Adsorption by using activated carbon from biomass is an economic and conventional way on removing the heavy metal ions from wastewater. In this research, activated carbon is synthesized from Jatropha curcas L. seed hull through chemical activation with ZnCl2 and carbonized at 800 °C (JAC/ZnCl2). The activated carbon has been characterized using FTIR, SEM-EDX, BET and CHNS-O analyzer. Adsorption isotherms have been analysed using Langmuir and Freundlich models to determine its removal mechanism. The maximum adsorption capacity of Cr (VI) metal ions onto JAC/ZnCl2 activated carbon is 25.189 mg/g and following Langmuir isotherm model which is monolayer adsorption.

  5. Co-combustion of peanut hull and coal blends: Artificial neural networks modeling, particle swarm optimization and Monte Carlo simulation.

    Science.gov (United States)

    Buyukada, Musa

    2016-09-01

    Co-combustion of coal and peanut hull (PH) were investigated using artificial neural networks (ANN), particle swarm optimization, and Monte Carlo simulation as a function of blend ratio, heating rate, and temperature. The best prediction was reached by ANN61 multi-layer perception model with a R(2) of 0.99994. Blend ratio of 90 to 10 (PH to coal, wt%), temperature of 305°C, and heating rate of 49°Cmin(-1) were determined as the optimum input values and yield of 87.4% was obtained under PSO optimized conditions. The validation experiments resulted in yields of 87.5%±0.2 after three replications. Monte Carlo simulations were used for the probabilistic assessments of stochastic variability and uncertainty associated with explanatory variables of co-combustion process. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Quality of Low Fat Chicken Nuggets: Effect of Sodium Chloride Replacement and Added Chickpea (Cicer arietinum L.) Hull Flour.

    Science.gov (United States)

    Verma, Arun K; Banerjee, Rituparna; Sharma, B D

    2012-02-01

    While attempting to develop low salt, low fat and high fibre chicken nuggets, the effect of partial (40%) common salt substitution and incorporation of chickpea hull flour (CHF) at three different levels viz., 5, 7.5 and 10% (Treatments) in pre-standardized low fat chicken nuggets (Control) were observed. Common salt replacement with salt substitute blend led to a significant decrease in pH, emulsion stability, moisture, ash, hardness, cohesiveness, gumminess and chewiness values while incorporation of CHF in low salt, low fat products resulted in decreased emulsion stability, cooking yield, moisture, protein, ash, color values, however dietary fibre and textural properties were increased (pnuggets with CHF, incorporation CHF at 5% level was found optimum having sensory ratings close to very good. Thus most acceptable low salt, low fat and high fibre chicken nuggets could be developed by a salt replacement blend and addition of 5% CHF.

  7. Shielding Theory

    Directory of Open Access Journals (Sweden)

    Ion N.Chiuta

    2009-05-01

    Full Text Available The paper determines relations for shieldingeffectiveness relative to several variables, includingmetal type, metal properties, thickness, distance,frequency, etc. It starts by presenting some relationshipsregarding magnetic, electric and electromagnetic fieldsas a pertinent background to understanding and applyingfield theory. Since literature about electromagneticcompatibility is replete with discussions about Maxwellequations and field theory only a few aspects arepresented.

  8. Tank tests to determine the effect of varying design parameters of planing-tail hulls II : effect of varying depth of step, angle of after- body keel, length of afterbody chine, and gross load

    Science.gov (United States)

    Dawson, John R; Mckann, Robert; Hay, Elizabeth S

    1946-01-01

    The second part of a series of tests made in Langley tank no. 2 to determine the effect of varying design parameters of planing-tail hulls is presented. Results are given to show the effects on resistance characteristics of varying angle of afterbody keel, depth of step, and length of afterbody chine. The effect of varying the gross load is shown for one configuration. The resistance characteristics of planing-tail hulls are compared with those of a conventional flying-boat hull. The forces on the forebody and afterbody of one configuration are compared with the forces on a conventional hull. Increasing the angle of afterbody keel had small effect on hump resistance and no effect on high-speed resistance but increased free-to-trim resistance at intermediate speeds. Increasing the depth of step increased hump resistance, had little effect on high-speed resistance, and increased free-to-trim resistance at intermediate speeds. Omitting the chines on the forward 25 percent of the afterbody had no appreciable effect on resistance. Omitting 70 percent of the chine length had almost no effect on maximum resistance but broadened the hump and increased spray around the afterbody. Load-resistance ratio at the hump decreased more rapidly with increasing load coefficient for the planing-tail hull than for the representative conventional hull, although the load-resistance ratio at the hump was greater for the planing-tail hull than for the conventional hull throughout the range of loads tested. At speeds higher than hump speed, load-resistance ratio for the planing-tail hull was a maximum at a particular gross load and was slightly less at heavier and lighter gross loads. The planing-tail hull was found to have lower resistance than the conventional hull at both the hump and at high speeds, but at intermediate speeds there was little difference. The lower hump resistance of the planing-tail hull was attributed to the ability of the afterbody to carry a greater percentage of the

  9. Uncertainty theory

    CERN Document Server

    Liu, Baoding

    2015-01-01

    When no samples are available to estimate a probability distribution, we have to invite some domain experts to evaluate the belief degree that each event will happen. Perhaps some people think that the belief degree should be modeled by subjective probability or fuzzy set theory. However, it is usually inappropriate because both of them may lead to counterintuitive results in this case. In order to rationally deal with belief degrees, uncertainty theory was founded in 2007 and subsequently studied by many researchers. Nowadays, uncertainty theory has become a branch of axiomatic mathematics for modeling belief degrees. This is an introductory textbook on uncertainty theory, uncertain programming, uncertain statistics, uncertain risk analysis, uncertain reliability analysis, uncertain set, uncertain logic, uncertain inference, uncertain process, uncertain calculus, and uncertain differential equation. This textbook also shows applications of uncertainty theory to scheduling, logistics, networks, data mining, c...

  10. Potential Theory

    CERN Document Server

    Lukeš, Jaroslav; Netuka, Ivan; Veselý, Jiří

    1988-01-01

    Within the tradition of meetings devoted to potential theory, a conference on potential theory took place in Prague on 19-24, July 1987. The Conference was organized by the Faculty of Mathematics and Physics, Charles University, with the collaboration of the Institute of Mathematics, Czechoslovak Academy of Sciences, the Department of Mathematics, Czech University of Technology, the Union of Czechoslovak Mathematicians and Physicists, the Czechoslovak Scientific and Technical Society, and supported by IMU. During the Conference, 69 scientific communications from different branches of potential theory were presented; the majority of them are in­ cluded in the present volume. (Papers based on survey lectures delivered at the Conference, its program as well as a collection of problems from potential theory will appear in a special volume of the Lecture Notes Series published by Springer-Verlag). Topics of these communications truly reflect the vast scope of contemporary potential theory. Some contributions deal...

  11. Field theory

    CERN Multimedia

    1999-11-08

    In these lectures I will build up the concept of field theory using the language of Feynman diagrams. As a starting point, field theory in zero spacetime dimensions is used as a vehicle to develop all the necessary techniques: path integral, Feynman diagrams, Schwinger-Dyson equations, asymptotic series, effective action, renormalization etc. The theory is then extended to more dimensions, with emphasis on the combinatorial aspects of the diagrams rather than their particular mathematical structure. The concept of unitarity is used to, finally, arrive at the various Feynman rules in an actual, four-dimensional theory. The concept of gauge-invariance is developed, and the structure of a non-abelian gauge theory is discussed, again on the level of Feynman diagrams and Feynman rules.

  12. Use of almond shell and almond hull as substrates for sweet pepper cultivation. Effects on fruit yield and mineral content

    Energy Technology Data Exchange (ETDEWEB)

    Valverde, M.; Madrid, R.; Garcia, A. L.; Amor, F. M. del; Rincon, L.

    2013-05-01

    The use of almond by products as substrate in greenhouses for growing vegetables has a great economic interest. The objective of this work was to assess the use of two almond by-products (almond shell-AS and almond hull-AH), which had been previously conditioned without composting, as substrates for pepper (cv. Caprino F1) production and to study their effects on the yield, fruit size, and fruit mineral content. Physical, physico-chemical, and chemical characteristics of the almond by-products were determined both initially and during the pepper growing season. Initially, all values of the parameters studied ? except sulfur and iron ? differed significantly between the two substrates. During cultivation, the 18 substrate parameters and variables tested - except bulk density - exhibited significant variations with time for AS; the same occurred for AH, exceptions being pH, total nitrogen Nt, N-NH4, bulk density, and manganese. The changes in both substrates for the K, N, and S concentrations were significant. The nutrient levels in AH were higher than for AS. The almond shell and almond hull substrates produced slight decreases in total fruit yield with respect to the control (0.79 and 3.22 for AS and AH, respectively), with a lesser decrease for AS, due to reductions in the number of fruits per plant rather than to reductions in individual fruit weight. The plants grown on the AS and AH substrates showed a decrease in total fruit yield, due to reductions in the number of fruits per plant rather than reductions in individual fruit weight. (Author) 37 refs.

  13. Use of almond shell and almond hull as substrates for sweet pepper cultivation. Effects on fruit yield and mineral content

    Directory of Open Access Journals (Sweden)

    M. Valverde

    2013-01-01

    Full Text Available The use of almond by products as substrate in greenhouses for growing vegetables has a great economic interest. The objective of this work was to assess the use of two almond by-products (almond shell-AS and almond hull-AH, which had been previously conditioned without composting, as substrates for pepper (cv. Caprino F1 production and to study their effects on the yield, fruit size, and fruit mineral content. Physical, physico-chemical, and chemical characteristics of the almond by-products were determined both initially and during the pepper growing season. Initially, all values of the parameters studied ― except sulfur and iron ― differed significantly between the two substrates. During cultivation, the 18 substrate parameters and variables tested - except bulk density - exhibited significant variations with time for AS; the same occurred for AH, exceptions being pH, total nitrogen Nt, N-NH4, bulk density, and manganese. The changes in both substrates for the K, N, and S concentrations were significant. The nutrient levels in AH were higher than for AS. The almond shell and almond hull substrates produced slight decreases in total fruit yield with respect to the control (0.79 and 3.22 for AS and AH, respectively, with a lesser decrease for AS, due to reductions in the number of fruits per plant rather than to reductions in individual fruit weight. The plants grown on the AS and AH substrates showed a decrease in total fruit yield, due to reductions in the number of fruits per plant rather than reductions in individual fruit weight.

  14. A Canonical Password Strength Measure

    OpenAIRE

    Panferov, Eugene

    2015-01-01

    We notice that the "password security" discourse is missing the most fundamental notion of the "password strength" -- it was never properly defined. We propose a canonical definition of the "password strength", based on the assessment of the efficiency of a set of possible guessing attack. Unlike naive password strength assessments our metric takes into account the attacker's strategy, and we demonstrate the necessity of that feature. This paper does NOT advise you to include "at least three ...

  15. Commitee III.1 Ultimate Strength

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher

    1997-01-01

    This report addresses the subject of ductile collapse of ships and offshore structures and their components due to buckling and excessive yielding under overload conditions. Consideration is given to load-deflection predictions for components with fabrication imperfections and in-service damage a...... and to the ultimate strength and post-ultimate behaviour of structural systems in order to identify the reserve strength. The effect of uncertainties in the modelling on the strength predictions is highlighted in two design examples....

  16. Airborne field strength monitoring

    Science.gov (United States)

    Bredemeyer, J.; Kleine-Ostmann, T.; Schrader, T.; Münter, K.; Ritter, J.

    2007-06-01

    In civil and military aviation, ground based navigation aids (NAVAIDS) are still crucial for flight guidance even though the acceptance of satellite based systems (GNSS) increases. Part of the calibration process for NAVAIDS (ILS, DME, VOR) is to perform a flight inspection according to specified methods as stated in a document (DOC8071, 2000) by the International Civil Aviation Organization (ICAO). One major task is to determine the coverage, or, in other words, the true signal-in-space field strength of a ground transmitter. This has always been a challenge to flight inspection up to now, since, especially in the L-band (DME, 1GHz), the antenna installed performance was known with an uncertainty of 10 dB or even more. In order to meet ICAO's required accuracy of ±3 dB it is necessary to have a precise 3-D antenna factor of the receiving antenna operating on the airborne platform including all losses and impedance mismatching. Introducing precise, effective antenna factors to flight inspection to achieve the required accuracy is new and not published in relevant papers yet. The authors try to establish a new balanced procedure between simulation and validation by airborne and ground measurements. This involves the interpretation of measured scattering parameters gained both on the ground and airborne in comparison with numerical results obtained by the multilevel fast multipole algorithm (MLFMA) accelerated method of moments (MoM) using a complex geometric model of the aircraft. First results will be presented in this paper.

  17. Strength of Chemical Bonds

    Science.gov (United States)

    Christian, Jerry D.

    1973-01-01

    Students are not generally made aware of the extraordinary magnitude of the strengths of chemical bonds in terms of the forces required to pull them apart. Molecular bonds are usually considered in terms of the energies required to break them, and we are not astonished at the values encountered. For example, the Cl2 bond energy, 57.00 kcal/mole, amounts to only 9.46 x 10(sup -20) cal/molecule, a very small amount of energy, indeed, and impossible to measure directly. However, the forces involved in realizing the energy when breaking the bond operate over a very small distance, only 2.94 A, and, thus, f(sub ave) approx. equals De/(r - r(sub e)) must be very large. The forces involved in dissociating the molecule are discussed in the following. In consideration of average forces, the molecule shall be assumed arbitrarily to be dissociated when the atoms are far enough separated so that the potential, relative to that of the infinitely separated atoms, is reduced by 99.5% from the potential of the molecule at the equilibrium bond length (r(sub e)) for Cl2 of 1.988 A this occurs at 4.928 A.

  18. Cancer Prevention: Distinguishing Strength of Evidence from Strength of Opinion

    Science.gov (United States)

    Barnett S. Kramer, MD, MPH, Associate Director for Disease Prevention and Director of the Office of Medical Applications of Research in the Office of Disease Prevention, Office of the Director, National Institutes of Health, Bethesda, MD, presented "Cancer Prevention: Distinguishing Strength of Evidence from Strength of Opinion".

  19. Plasticity theory

    CERN Document Server

    Lubliner, Jacob

    2008-01-01

    The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and

  20. Lattice theory

    CERN Document Server

    Birkhoff, Garrett

    1940-01-01

    Since its original publication in 1940, this book has been revised and modernized several times, most notably in 1948 (second edition) and in 1967 (third edition). The material is organized into four main parts: general notions and concepts of lattice theory (Chapters I-V), universal algebra (Chapters VI-VII), applications of lattice theory to various areas of mathematics (Chapters VIII-XII), and mathematical structures that can be developed using lattices (Chapters XIII-XVII). At the end of the book there is a list of 166 unsolved problems in lattice theory, many of which still remain open. I

  1. Agency Theory

    DEFF Research Database (Denmark)

    Linder, Stefan; Foss, Nicolai Juul

    2015-01-01

    Agency theory studies the problems and solutions linked to delegation of tasks from principals to agents in the context of conflicting interests between the parties. Beginning from clear assumptions about rationality, contracting, and informational conditions, the theory addresses problems of ex...... ante (‘hidden characteristics’) as well as ex post information asymmetry (‘hidden action’), and examines conditions under which various kinds of incentive instruments and monitoring arrangements can be deployed to minimize the welfare loss. Its clear predictions and broad applicability have allowed...... agency theory to enjoy considerable scientific impact on social science; however, it has also attracted considerable criticism....

  2. Agency Theory

    DEFF Research Database (Denmark)

    Linder, Stefan; Foss, Nicolai Juul

    Agency theory studies the problems and solutions linked to delegation of tasks from principals to agents in the context of conflicting interests between the parties. Beginning from clear assumptions about rationality, contracting and informational conditions, the theory addresses problems of ex...... ante (“hidden characteristics”) as well as ex post information asymmetry (“hidden action”), and examines conditions under which various kinds of incentive instruments and monitoring arrangements can be deployed to minimize the welfare loss. Its clear predictions and broad applicability have allowed...... agency theory to enjoy considerable scientific impact on social science; however, it has also attracted considerable criticism....

  3. Number theory

    CERN Document Server

    Andrews, George E

    1994-01-01

    Although mathematics majors are usually conversant with number theory by the time they have completed a course in abstract algebra, other undergraduates, especially those in education and the liberal arts, often need a more basic introduction to the topic.In this book the author solves the problem of maintaining the interest of students at both levels by offering a combinatorial approach to elementary number theory. In studying number theory from such a perspective, mathematics majors are spared repetition and provided with new insights, while other students benefit from the consequent simpl

  4. Expectancy Theory Modeling

    Science.gov (United States)

    1982-08-01

    fact that each psychologist has tended to align himself or herself with a single one of the leading learning theorists, such as Thorndike , Hull, Lewin... Edwards (1953) has developed a 12-dimensional Personal Preference Schedule, based on Murray’s postulated needs, that has provided the 7h basis of...productivity enhancement (NPRDC Tech. Rep. 80-29). San Diego: Navy Personnel Research and Development Center, July 1980. (AD-A087 489). Edwards , A. L

  5. Fourier Hull Fatigue Assessment Method’s Proposing and Software Development

    Directory of Open Access Journals (Sweden)

    Jing Chen

    2014-05-01

    Full Text Available In this paper, based on the spectral analysis and the strain energy theory, the systematic errors of Rain-flow Counting Method have been quantitatively analyzed, from which a Fourier Counting Method is put forward. And according to this new method, software has been developed combined with sampling data of the real container ship via rigorous theoretical derivation and compact modular design, which has certain theoretical innovation significance and practical value.

  6. Continuity theory

    CERN Document Server

    Nel, Louis

    2016-01-01

    This book presents a detailed, self-contained theory of continuous mappings. It is mainly addressed to students who have already studied these mappings in the setting of metric spaces, as well as multidimensional differential calculus. The needed background facts about sets, metric spaces and linear algebra are developed in detail, so as to provide a seamless transition between students' previous studies and new material. In view of its many novel features, this book will be of interest also to mature readers who have studied continuous mappings from the subject's classical texts and wish to become acquainted with a new approach. The theory of continuous mappings serves as infrastructure for more specialized mathematical theories like differential equations, integral equations, operator theory, dynamical systems, global analysis, topological groups, topological rings and many more. In light of the centrality of the topic, a book of this kind fits a variety of applications, especially those that contribute to ...

  7. [Theory? Practice?].

    Science.gov (United States)

    Medina Moya, José Luis

    2005-04-01

    This second article about the difficult balance between academic and professional development in pre-European Spain poses the issue of the theory-practice, or learning-treatment, relationship as the historical dissolution of the practical in the theoretical.

  8. Model theory

    CERN Document Server

    Hodges, Wilfrid

    1993-01-01

    An up-to-date and integrated introduction to model theory, designed to be used for graduate courses (for students who are familiar with first-order logic), and as a reference for more experienced logicians and mathematicians.

  9. Concept theory

    DEFF Research Database (Denmark)

    Hjørland, Birger

    2009-01-01

      Concept theory is an extremely broad, interdisciplinary and complex field of research related to many deep fields with very long historical traditions without much consensus. However, information science and knowledge organization cannot avoid relating to theories of concepts. Knowledge...... organizing systems (e.g. classification systems, thesauri and ontologies) should be understood as systems basically organizing concepts and their semantic relations. The same is the case with information retrieval systems. Different theories of concepts have different implications for how to construe......). It is also argued that the historicist and pragmatist understandings of concepts are the most fruitful views and that this understanding may be part of a broader paradigm shift that is also beginning to take place in information science.  The importance of historicist and pragmatic theories of concepts...

  10. Static and Dynamic Flexural Strength Anisotropy of Barre Granite

    Science.gov (United States)

    Dai, F.; Xia, K.; Zuo, J. P.; Zhang, R.; Xu, N. W.

    2013-11-01

    Granite exhibits anisotropy due to pre-existing microcracks under tectonic loadings; and the mechanical property anisotropy such as flexural/tensile strength is vital to many rock engineering applications. In this paper, Barre Granite is studied to understand the flexural strength anisotropy under a wide range of loading rates using newly proposed semi-circular bend tests. Static tests are conducted with a MTS hydraulic servo-control testing machine and dynamic tests with a split Hopkinson pressure bar (SHPB) system. Six samples groups are fabricated with respect to the three principle directions of Barre granite. Pulse shaping technique is used in all dynamic SHPB tests to facilitate dynamic stress equilibrium. Finite element method is utilized to build up equations calculating the flexural tensile strength. For samples in the same orientation group, a loading rate dependence of the flexural tensile strength is observed. The measured flexural tensile strength is higher than the tensile strength measured using Brazilian disc method at given loading rate and this scenario has been rationalized using a non-local failure theory. The flexural tensile strength anisotropy features obvious dependence on the loading rates, the higher the loading rate, the less the anisotropy and this phenomenon may be explained considering the interaction of the preferentially oriented microcracks.

  11. Graph theory

    CERN Document Server

    Gould, Ronald

    2012-01-01

    This introduction to graph theory focuses on well-established topics, covering primary techniques and including both algorithmic and theoretical problems. The algorithms are presented with a minimum of advanced data structures and programming details. This thoroughly corrected 1988 edition provides insights to computer scientists as well as advanced undergraduates and graduate students of topology, algebra, and matrix theory. Fundamental concepts and notation and elementary properties and operations are the first subjects, followed by examinations of paths and searching, trees, and networks. S

  12. The assessment of hull fouling as a mechanism for the introduction and dispersal of marine alien species in the main Hawaiian Islands through surveys at harbors on Oahu's southern and southwestern coasts during 2003 (NODC Accession 0001455)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Surveys for adult invertebrates that were part of the hull fouling communities were done to determine to what extent marine alien invasive species (AIS) are being...

  13. The assessment of hull fouling as a mechanism for the introduction and dispersal of alien species in the main Hawaiian Islands through surveys at harbors on Oahu's Southern and Southwestern Coasts during 2003 (NODC Accession 0001455)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Surveys for adult invertebrates that were part of the hull fouling communities were done to determine to what extent marine alien invasive species (AIS) are being...

  14. Conspiracy Theory

    DEFF Research Database (Denmark)

    Bjerg, Ole; Presskorn-Thygesen, Thomas

    2017-01-01

    The paper is a contribution to current debates about conspiracy theories within philosophy and cultural studies. Wittgenstein’s understanding of language is invoked to analyse the epistemological effects of designating particular questions and explanations as a ‘conspiracy theory’. It is demonstr......The paper is a contribution to current debates about conspiracy theories within philosophy and cultural studies. Wittgenstein’s understanding of language is invoked to analyse the epistemological effects of designating particular questions and explanations as a ‘conspiracy theory......’. It is demonstrated how such a designation relegates these questions and explanations beyond the realm of meaningful discourse. In addition, Agamben’s concept of sovereignty is applied to explore the political effects of using the concept of conspiracy theory. The exceptional epistemological status assigned...... to alleged conspiracy theories within our prevalent paradigms of knowledge and truth is compared to the exceptional legal status assigned to individuals accused of terrorism under the War on Terror. The paper concludes by discussing the relation between conspiracy theory and ‘the paranoid style...

  15. Strength Training for Young Athletes.

    Science.gov (United States)

    Kraemer, William J.; Fleck, Steven J.

    This guide is designed to serve as a resource for developing strength training programs for children. Chapter 1 uses research findings to explain why strength training is appropriate for children. Chapter 2 explains some of the important physiological concepts involved in children's growth and development as they apply to developing strength…

  16. Loading Conditions and Longitudinal Strength

    DEFF Research Database (Denmark)

    Sørensen, Herman

    1995-01-01

    Methods for the calculation of the lightweight of the ship.Loading conditions satisfying draught, trim and intact stability requirements and analysis of the corresponding stillwater longitudinal strength.......Methods for the calculation of the lightweight of the ship.Loading conditions satisfying draught, trim and intact stability requirements and analysis of the corresponding stillwater longitudinal strength....

  17. Phase strength and super lattices

    Indian Academy of Sciences (India)

    Unknown

    Abstract. Powder XRD investigations on dotriacontane-decane and dotriacontane-decanol mixtures are made. Phase strength, phase separation and formation of superlattices are discussed. The role of tunnel-like defects is considered. Keywords. Hydrocarbons; mixtures; phase strength; tunnel-like defects; super lattices. 1.

  18. Gamow-Teller and M1 strengths in closed-shell nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Adachi, S.; Lipparini, E.; Nguyen Van Giai

    1985-05-13

    We study the transition strengths induced by the operators sigma, sigmaxtau, lxtau and their combinations in the closed-shell nuclei /sup 16/O and /sup 40/Ca. The total inverse energy-weighted and energy-weighted strengths are calculated in perturbation theory. The results are discussed in connection with the available data. A large amount of Gamow-Teller and M1 strength is predicted at high excitation energies.

  19. An analysis of China's global industrial competitive strength based on vertical specialization

    OpenAIRE

    Zhang, Xiaodi; Sun, Jingwei

    2007-01-01

    At the beginning of the 1990s, China witnessed an increase in its international competitive strength in technology-intensive and capital-intensive industries, and a decrease in strength in labor-intensive industries. This paper analyzes the effect of vertical specialization on China's international industrial competitive strength, explores how different industries have varying reactions under its implementation, and employs theory to explain the possible causes of these reactions. It is found...

  20. The effect of stimulus strength on the speed and accuracy of a perceptual decision.

    Science.gov (United States)

    Palmer, John; Huk, Alexander C; Shadlen, Michael N

    2005-05-02

    Both the speed and the accuracy of a perceptual judgment depend on the strength of the sensory stimulation. When stimulus strength is high, accuracy is high and response time is fast; when stimulus strength is low, accuracy is low and response time is slow. Although the psychometric function is well established as a tool for analyzing the relationship between accuracy and stimulus strength, the corresponding chronometric function for the relationship between response time and stimulus strength has not received as much consideration. In this article, we describe a theory of perceptual decision making based on a diffusion model. In it, a decision is based on the additive accumulation of sensory evidence over time to a bound. Combined with simple scaling assumptions, the proportional-rate and power-rate diffusion models predict simple analytic expressions for both the chronometric and psychometric functions. In a series of psychophysical experiments, we show that this theory accounts for response time and accuracy as a function of both stimulus strength and speed-accuracy instructions. In particular, the results demonstrate a close coupling between response time and accuracy. The theory is also shown to subsume the predictions of Piéron's Law, a power function dependence of response time on stimulus strength. The theory's analytic chronometric function allows one to extend theories of accuracy to response time.