WorldWideScience

Sample records for huge oil deposits

  1. Canadian firm contains huge oil spill in Northern Russia

    International Nuclear Information System (INIS)

    Gray, B.

    1997-01-01

    The Kharyaga-Usink pipeline, 1400 km northeast of Moscow, suffered a major failure in the fall of 1994, releasing some 100,000 tonnes of oil (three times more than the Exxon Valdez) into the frozen tundra. It was considered by environmental groups as one of the worst disasters of its kind. The oil threatened to seep into the nearby rivers and eventually into the Barents Sea. After a delay of some three months AGRA Earth and Environmental of Calgary, an engineering consulting firm, was called in to inspect the damage and to make recommendations for a successful cleanup operation. A multi-disciplinary emergency response team was formed to assess the environmental and socio-economic impacts of the spill, the state of the existing pipeline, and the Russian plans for spill containment and recovery. Community consultation, probably the first in Russia, was part of the evaluation, culminating in a three-volume appraisal report containing detailed recommendation on how to properly contain the spill. On the strength of the report the World Bank and the European Bank for Reconstruction and Development approved loans to the Russian Federation totaling 145 million dollars to undertake the work of pipeline restoration. Construction of the uniquely-designed dams as well as the Russian-pioneered siphon-dams was done by international contractors and maintained throughout the breakup period. A new pipeline is also being constructed to prevent future leaks

  2. Nigeria: the huge oil challenges for the new President Muhammadu Buhari

    International Nuclear Information System (INIS)

    Auge, Benjamin

    2015-09-01

    After having outlined that results of oil and gas production by Nigeria are rather low with respect to its reserve levels and when compared to the performance of other countries, this article first proposes a critical analysis of the mandate of the previous Nigerian President, Jonathan Goodluck, between 2010 and 2015. The author describes how Nigeria has progressively lost investor confidence, how major companies disengaged in favour of local companies with better relationships with the government. He outlines the total lack of transparency on oil revenue transfers and on license awarding procedures. In a second part, the author presents and comments the new perspectives and challenges for the new president, Muhammadu Buhari, for whom oil issues are said to be a priority. This means that cleaning up the oil sector and the American support requires legal affairs to be revived. The author also comments the cost of a peace with the oil producing region which voted for the former president

  3. Wax deposition in crude oil pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Assuncao, Pablo Morelato; Rodrigues, Lorennzo Marrochi Nolding [Universidade Federal do Espirito Santo, Sao Mateus, ES (Brazil). Centro Universitario Norte do Espirito Santo. Engenharia de Petroleo; Romero, Mao Ilich [University of Wyoming, Laramie, WY (United States). Enhanced Oil Recovery Institute], e-mail: mromerov@uwyo.edu

    2010-07-01

    Crude oil is a complex mixture of hydrocarbons which consists of aromatics, paraffins, naphthenics, resins asphaltenes, etc. When the temperature of crude oil is reduced, the heavy components, like paraffin, will precipitate and deposit on the pipe internal wall in the form of a wax-oil gel. The gel deposit consists of wax crystals that trap some amount of oil. As the temperature gets cooler, more wax will precipitate and the thickness of the wax gel will increase, causing gradual solidification of the crude and eventually the oil stop moving inside the offshore pipeline. Crude oil may not be able to be re-mobilized during re-startup. The effective diameter will be reduced with wax deposition, resulting in several problems, for example, higher pressure drop which means additional pumping energy costs, poor oil quality, use of chemical components like precipitation inhibitors or flowing facilitators, equipment failure, risk of leakage, clogging of the ducts and process equipment. Wax deposition problems can become so sever that the whole pipeline can be completely blocked. It would cost millions of dollars to remediate an offshore pipeline that is blocked by wax. Wax solubility decreases drastically with decreasing temperature. At low temperatures, as encountered in deep water production, is easy to wax precipitate. The highest temperature below which the paraffins begins to precipitate as wax crystals is defined as wax appearance temperature (WAT). Deposition process is a complex free surface problem involving thermodynamics, fluid dynamics, mass and heat transfer. In this work, a numerical analysis of wax deposition by molecular diffusion and shear dispersion mechanisms in crude oil pipeline is studied. Diffusion flux of wax toward the wall is estimated by Fick's law of diffusion, in similar way the shear dispersion; wax concentration gradient at the solid-liquid interface is obtained by the volume fraction conservation equation; and since the wax deposition

  4. A tale of two countries : blessed with huge heavy oil resources, Canada and Venezuela pursue different paths

    International Nuclear Information System (INIS)

    Ball, C.

    2005-01-01

    Both Canada and Venezuela are rich in heavy oil resources. This article presented an overview of current development activities in both countries. International interest in the oil sands region has been highlighted by the French oil company Total's acquisition of Deer Creek Energy Ltd in Alberta for $1.35 billion. The acquisition supports the company's strategy of expanding heavy oil operations in the Athabasca region. With 47 per cent participation in the Sincor project, Total is already a major player in Venezuela. Although the Sincor project is one of the world's largest developments, future investment is in jeopardy due to an unpredictable government and shifts in policy by the state-run oil company Petroleos de Venezuela S.A. (PDVSA). The country's energy minister has recently announced that all existing agreements will be terminated as of December 31, 2005. The government has allowed 6 months for companies to enter into new agreements with new terms. Under revised rules, foreign companies will be required to pay income tax at a rate of 50 per cent. The rate will be applied retroactively to profits made over the last 5 years. Under the new law, agreements could be established under the terms of mixed companies, where Venezuela will have majority equity in the company that exploits the oil. In addition, the government has accused companies of not paying the required income tax levels on contracts, and some companies have been fined as much as $100 million. It was suggested that current difficulties are the result of an incoherent energy policy and an unstable regime. The international oil and gas community is watching developments, and it was anticipated that parties previously considering Venezuela as an investment opportunity will now reconsider. By contrast, Alberta has been praised by oil companies for its stable regulatory regime and its reasonable royalty structure. Thanks to a purge of 18,000 employees from PDVSA by Venezuelan president, Alberta is now

  5. Biodegradation of oils in uranium deposits

    International Nuclear Information System (INIS)

    Landais, P.

    1989-01-01

    The biodegradation of free hydrocarbons that have migrated in reservoir facies has often been observed in the field of petroleum exploration. This alteration is characterized by the progressive removal by bacteria of the different types of hydrocarbons: n-alkanes, branched alkanes, aromatics, cycloalkanes, etc. One of the most important consequences of biodegradation is the biogenic reduction of sulphate, which has been noticed in several Pb-Zn deposits. Biodegradation of oils spatially associated with uranium mineralizations has been observed in Temple Mountain, Utah, and the Grand Canyon, Arizona, in the United States of America, and in Lodeve in France. It leads to the transformation of fluid oils into solid bitumens. Emphasis is placed on the relationships between the effects of biodegradation on organic matter (oxidation of aromatization) and the nature of aqueous fluids analysed in fluid inclusions trapped in authigenic minerals. Different mechanisms are proposed to explain the transformations of organic matter during biodegradation and their possible links with the ore forming process. (author). 40 refs, 13 figs, 1 tab

  6. Carbon sequestration in depleted oil shale deposits

    Science.gov (United States)

    Burnham, Alan K; Carroll, Susan A

    2014-12-02

    A method and apparatus are described for sequestering carbon dioxide underground by mineralizing the carbon dioxide with coinjected fluids and minerals remaining from the extraction shale oil. In one embodiment, the oil shale of an illite-rich oil shale is heated to pyrolyze the shale underground, and carbon dioxide is provided to the remaining depleted oil shale while at an elevated temperature. Conditions are sufficient to mineralize the carbon dioxide.

  7. Simulation of Fog Oil Deposition During Military Training Operations

    National Research Council Canada - National Science Library

    Haehnel, Robert B

    2008-01-01

    ...) obscurant on the ground using the SCIPuff aerosol transport model. Model results are compared to actual deposition of fog oil measure on the ground during two military training exercises in Alaska...

  8. Production of oil from Intermountain West tar sands deposits

    Energy Technology Data Exchange (ETDEWEB)

    Glassett, J.M.; Glassett, J.A.

    1976-03-01

    Six tar sand deposits in the Intermountain West, each containing more than one billion barrels of oil in place, are identified. All of these deposits are in eastern Utah and contain a total of twenty-eight billion barrels of oil. The names of the six deposits arranged in descending order of desirability for large-scale surface-mining oil recovery operations are as follows: Sunnyside, Tar Sand Triangle, Asphalt Ridge, P.R. Spring, Circle Cliffs, and Hill Creek. An overview of each deposit is presented including geology, surface-mining variables, chemical processing variables, environmental aspects, and economics. A comparison of Utah tar sands and Athabasca, Alberta, Canada tar sands is also presented.

  9. Automatic Measuring System for Oil Stream Paraffin Deposits Parameters

    Science.gov (United States)

    Kopteva, A. V.; Koptev, V. Yu

    2018-03-01

    This paper describes a new method for monitoring oil pipelines, as well as a highly efficient and automated paraffin deposit monitoring method. When operating oil pipelines, there is an issue of paraffin, resin and salt deposits on the pipeline walls that come with the oil stream. It ultimately results in frequent transportation suspension to clean or even replace pipes and other equipment, thus shortening operation periods between repairs, creating emergency situations and increasing production expenses, badly affecting environment, damaging ecology and spoil underground water, killing animals, birds etc. Oil spills contaminate rivers, lakes, and ground waters. Oil transportation monitoring issues are still subject for further studying. Thus, there is the need to invent a radically new automated process control and management system, together with measurement means intellectualization. The measurement principle is based on the Lambert-Beer law that describes the dependence between the gamma-radiation frequency and the density together with the linear attenuation coefficient for a substance. Using the measuring system with high accuracy (± 0,2%), one can measure the thickness of paraffin deposits with an absolute accuracy of ± 5 mm, which is sufficient to ensure reliable operation of the pipeline system. Safety is a key advantage, when using the proposed control system.

  10. A huge cystic craniopharyngioma

    International Nuclear Information System (INIS)

    Takamura, Seishi; Fukumura, Akinobu; Ito, Yoshihiro; Itoyama, Yoichi; Matsukado, Yasuhiko.

    1986-01-01

    The findings of computed tomography (CT) of a huge cystic craniopharyngioma in a 57-year-old woman are described. Cyst density varied from low to high levels in a short duration. Follow-up CT scans were regarded as important to diagnose craniopharyngioma. The mechanism of increment of cyst density was discussed. (author)

  11. Chemically evolving systems for oil recovery enhancement in heavy oil deposits

    Science.gov (United States)

    Altunina, L. K.; Kuvshinov, I. V.; Kuvshinov, V. A.; Stasyeva, L. A.

    2017-12-01

    This work presents the results of laboratory studies and field tests of new physicochemical technologies for enhanced oil recovery of heavy oil fields under natural development conditions and with thermal-steam stimulation using oil-displacing "smart" systems. The systems are based on surfactants and buffer systems. Their rheological and acid-base properties can be regulated by their chemical evolution directly in the formation. Field tests of the technologies carried out on high-viscosity oil deposit in the Usinskoye oilfield have shown that the EOR technologies are environmentally friendly and technologically effective.

  12. EFFECT OF OIL TEMPERATURE ON THE WAX DEPOSITION OF CRUDE OIL WITH COMPOSITION ANALYSIS

    Directory of Open Access Journals (Sweden)

    Qing Quan

    Full Text Available Abstract Wax deposition behavior was investigated in a set of one-inch experiment flow loops, using a local crude oil with high wax content. The temperature of the oil phase is chosen as a variable parameter while the temperature of the coolant media is maintained constant. Detailed composition of the deposit is characterized using High Temperature Gas Chromatography. It was found that the magnitude of the diffusion of the heavier waxy components (C35-C50 decreases when the oil temperature decreases, but the magnitude of the diffusion of the lighter waxy components increases. This result means that the diffusion of wax molecules shifts towards lower carbon number, which further proves the concept of molecular diffusion. Meanwhile, a meaningful phenomenon is that the mass of the deposit increases with the oil temperature decrease, which definitely proves the influence of wax solubility on deposition, while the formation of an incipient gel layer reflects the fact that an increase in the mass of the deposit does not mean a larger wax percentage fraction at lower oil temperature.

  13. Safety of huge systems

    International Nuclear Information System (INIS)

    Kondo, Jiro.

    1995-01-01

    Recently accompanying the development of engineering technology, huge systems tend to be constructed. The disaster countermeasures of huge cities become large problems as the concentration of population into cities is conspicuous. To make the expected value of loss small, the knowledge of reliability engineering is applied. In reliability engineering, even if a part of structures fails, the safety as a whole system must be ensured, therefore, the design having margin is carried out. The degree of margin is called redundancy. However, such design concept makes the structure of a system complex, and as the structure is complex, the possibility of causing human errors becomes high. At the time of huge system design, the concept of fail-safe is effective, but simple design must be kept in mind. The accident in Mihama No. 2 plant of Kansai Electric Power Co. and the accident in Chernobyl nuclear power station, and the accident of Boeing B737 airliner and the fatigue breakdown are described. The importance of safety culture was emphasized as the method of preventing human errors. Man-system interface and management system are discussed. (K.I.)

  14. Fat, oil and grease deposits in sewers: characterisation of deposits and formation mechanisms.

    Science.gov (United States)

    Williams, J B; Clarkson, C; Mant, C; Drinkwater, A; May, E

    2012-12-01

    Fat, oil and grease deposits (FOG) in sewers are a major problem and can cause sewer overflows, resulting in environmental damage and health risks. Often simplistically portrayed as cooling of fats, recent research has suggested that saponification may be involved in FOG formation. However there are still questions about the mechanisms effecting transformations in sewers and the role and source of metal cations involved in saponification. This study characterises FOG deposits from pumping stations, sewers and sewage works from different water hardness zones across the UK. The sites all had previous problems with FOG and most catchments contained catering and food preparation establishments. The FOG deposits were highly variable with moisture content ranging from 15 to 95% and oil content from 0 to 548 mg/g. Generally the pumping stations had lower moisture content and higher fat content, followed by the sewers then the sewage works. The water in contact with the FOG had high levels of oil (mean of about 800 mg/L) and this may indicate poor kitchen FOG management practices. FOG fatty acid profiles showed a transformation from unsaturated to saturated forms compared to typical cooking oils. This seems to relate to ageing in the sewer network or the mechanism of formation, as samples from pumping stations had higher proportions of C18:1 compared to C16. This may be due to microbial transformations by bacteria such as Clostridium sp. in a similar process to adipocere formation. There was an association between water hardness and increased Ca levels in FOG along with harder deposits and higher melting points. A link between FOG properties and water hardness has not been previously reported for field samples. This may also be due to microbial processes, such as biocalcification. By developing the understanding of these mechanisms it may be possible to more effectively control FOG deposits, especially when combined with promotion of behavioural change. Copyright © 2012

  15. Depositional Environment of the Sangkarewang Oil Shale, Ombilin Basin, Indonesia

    Directory of Open Access Journals (Sweden)

    Komang Anggayana

    2014-12-01

    Full Text Available Five samples from 56 m long drill core of lacustrine Sangkarewang oil shale have been studied by means of petrography and organic geochemistry to investigate the organic matter composition and depositional environments of the shale. The organic matter consists of abundant lamalginite (30%, v/v and very limited amount of vitrinite, suggesting aquatic depositional environments with minor terrestrial influence. Organic geochemical analysis exhibits the dominance of pristane, phytane, and generally n-alkanes compounds. These compounds might originate mostly from aquatic photosynthetic organisms. The oil shale was likely deposited in anoxic lake environments, suggested by the presence of framboidal pyrite (6%, v/v and preserved organic matter with total organic carbon (TOC about 4.9%. The pristane/phytane ratio is relatively high about 3.9 and thought as source sensitive rather than redox sensitive. Hopanoid and aryl isoprenoid compounds are present in minor amounts. The latter compounds are interpreted to be derived from green sulfur bacteria dwelling in anoxic and the presence of H2S in bottom water.

  16. Influence of phosphorus content of coconut oil on deposit and performance of plant oil pressure stoves

    Energy Technology Data Exchange (ETDEWEB)

    Kratzeisen, M.; Mueller, J. [Institut fuer Agrartechnik, Universitaet Hohenheim (440e), Garbenstrasse 9, D-70593 Stuttgart (Germany)

    2010-11-15

    Influence of phosphorus lipids on formation of deposits and performance of plant oil pressure stoves was investigated. Refined coconut oil with an original phosphorous content of 5.9 mg/kg was used as base for fuel blends by adding lecithin to adjust increased phosphorous concentrations of 32.2, 51.6 and 63.0 mg/kg. The fuel blends were analysed for acid value, iodine value, total contamination, ash content and Conradson carbon residue according to standard methods. In burning trials, the specific fuel consumption, the required frequency of nozzle cleaning and the amount of deposits in the vaporizer were measured. Results showed an exponential increase of deposits in the vaporizer when phosphorous content was increased: deposits amounted to 0.12 g/kg of consumed fuel for unblended coconut oil and 0.92 g/kg for the blend with the highest phosphorous content. Furthermore, increased phosphorous content caused higher fuel consumption of 0.375 kg/h compared to 0.316 kg/h for the control. (author)

  17. Quantifying fat, oil, and grease deposit formation kinetics.

    Science.gov (United States)

    Iasmin, Mahbuba; Dean, Lisa O; Ducoste, Joel J

    2016-01-01

    Fat, oil, and grease (FOG) deposits formed in sanitary sewers are calcium-based saponified solids that are responsible for a significant number of nationwide sanitary sewer overflows (SSOs) across United States. In the current study, the kinetics of lab-based saponified solids were determined to understand the kinetics of FOG deposit formation in sewers for two types of fat (Canola and Beef Tallow) and two types of calcium sources (calcium chloride and calcium sulfate) under three pH (7 ± 0.5, 10 ± 0.5, and ≈14) and two temperature conditions (22 ± 0.5 and 45 ± 0.5 °C). The results of this study displayed quick reactions of a fraction of fats with calcium ions to form calcium based saponified solids. Results further showed that increased palmitic fatty acid content in source fats, the magnitude of the pH, and temperature significantly affect the FOG deposit formation and saponification rates. The experimental data of the kinetics were compared with two empirical models: a) Cotte saponification model and b) Foubert crystallization model and a mass-action based mechanistic model that included alkali driven hydrolysis of triglycerides. Results showed that the mass action based mechanistic model was able to predict changes in the rate of formation of saponified solids under the different experimental conditions compared to both empirical models. The mass-action based saponification model also revealed that the hydrolysis of Beef Tallow was slower compared to liquid Canola fat resulting in smaller quantities of saponified solids. This mechanistic saponification model, with its ability to track the saponified solids chemical precursors, may provide an initial framework to predict the spatial formation of FOG deposits in municipal sewers using system wide sewer collection modeling software. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Where the oil from surface and subsurface plumes deposited during/after Deepwater Horizon oil spill?

    Science.gov (United States)

    Yan, B.

    2016-02-01

    The Deepwater Horizon (DwH) oil spill released an estimated 4.9 million barrels (about 200 million gallons) of crude oil into the Gulf of Mexico between April 20, 2010 and July 15, 2010. Though Valentine et al. has linked the elevated oil components in some sediments with the subsurface plume, the sites with fallout from the ocean surface plume has not been identified. This piece of information is critical not only for a comprehensive scientific understanding of the ecosystem response and fate of spill-related pollutants, but also for litigation purposes and future spill response and restoration planning. In this study we focus on testing the hypothesis that marine snow from the surface plume were deposited on the sea floor over a broad area. To do so, we use publicly available data generated as part of the ongoing Natural Resource Damage Assessment (NRDA) process to assess the spatial distribution of petroleum hydrocarbons in the water column and deep-ocean sediments of the Gulf of Mexico. Sensitive hydrocarbon markers are used to differentiate hydrocarbons from surface plume, deep subsurface plume, and in-situ burning. Preliminary results suggest the overlapping but different falling sites of these plumes and the sedimentation process was controlled by various biological, chemical, and physical factors.

  19. Large-scale deposition of weathered oil in the Gulf of Mexico following a deep-water oil spill.

    Science.gov (United States)

    Romero, Isabel C; Toro-Farmer, Gerardo; Diercks, Arne-R; Schwing, Patrick; Muller-Karger, Frank; Murawski, Steven; Hollander, David J

    2017-09-01

    The blowout of the Deepwater Horizon (DWH) drilling rig in 2010 released an unprecedented amount of oil at depth (1,500 m) into the Gulf of Mexico (GoM). Sedimentary geochemical data from an extensive area (∼194,000 km 2 ) was used to characterize the amount, chemical signature, distribution, and extent of the DWH oil deposited on the seafloor in 2010-2011 from coastal to deep-sea areas in the GoM. The analysis of numerous hydrocarbon compounds (N = 158) and sediment cores (N = 2,613) suggests that, 1.9 ± 0.9 × 10 4 metric tons of hydrocarbons (>C9 saturated and aromatic fractions) were deposited in 56% of the studied area, containing 21± 10% (up to 47%) of the total amount of oil discharged and not recovered from the DWH spill. Examination of the spatial trends and chemical diagnostic ratios indicate large deposition of weathered DWH oil in coastal and deep-sea areas and negligible deposition on the continental shelf (behaving as a transition zone in the northern GoM). The large-scale analysis of deposited hydrocarbons following the DWH spill helps understanding the possible long-term fate of the released oil in 2010, including sedimentary transformation processes, redistribution of deposited hydrocarbons, and persistence in the environment as recycled petrocarbon. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  20. Current status and future of developing Upper Cretaceous oil deposits in the Oktyabrskoye field

    Energy Technology Data Exchange (ETDEWEB)

    Kamyshnikova, A.I.; Lapshin, M.Ye.

    1979-01-01

    The Upper Cretaceous deposit at the Oktyabrskoye field was discovered in 1966. Fractured, cavernous limestone, similar to the producing rock of many Upper Cretaceous deposits of the Chechen Ingush ASSR, form the reservoir. The deposit is situated toward a narrow anticlinal fold with angles of rock drop 40-45/sup 0/. Its heighth is 950m; the average capacity of the producing part is 400m; the deposit depth is 4200-5150m; the layer temperature is 150-160/sup 0/C. Exploratory work on the deposit is incomplete. The deposit was brought under industrial development in 1974. The development is conducted based on a refined, technological system, that includes contour flooding to maintain layer pressure in the center to edge part of the deposit at 36.0 MPa. This somewhat increases the pressure of the gas saturated oil, as well as the subsequent increase in layer pressure to 45.9 MPa for assuring wide open well flow during the late stages of development. Currently, the amount of oil obtained somewhat exceeds the planned level but the pumping volume is less than that planned. The deposit has not yet been studied sufficiently. Its boundaries have not been established; the locations of the initial and working water/oil edges are conditional; the structural plan is approximate. Data on the degree of waterflooding in the deposit and the magnitude of the actual oil yield coefficient are lacking inasmuch as the amount of oil already extracted at this time exceeds the calculated reserves. To increase the effectiveness of further development of the deposit and acquisition of the necessary data for calculating oil reserves, the deposit will be studied according to a special plan over a number of new drilling wells.

  1. New theoretical concept regarding the oil deposit as an object of working

    Energy Technology Data Exchange (ETDEWEB)

    Krylov, A.P.; Abasov, M.T.; Buryakovskiy, L.A.; Sultanov, Ch.A.

    1979-01-01

    This article is based on the principle of materialistic dialectrics regarding the interrelationship between all objects and phenomena of the material world. One should make a historical approach to an understanding of the national system, i.e., study them in development, and that any interrelationship can be expressed in a mathematical form. This creates prerequisites for modeling the oil deposit as a relatively isolated natural system. Within the actual system (deposit) the principle of interrelationship of individual elements (properties) is manifest, therefore it is necessary to pass to a more encompassing model which describes as a whole the natural system, the oil deposit. This is the object of technological effect. In such models the time difference between the geological-physical properties of the deposit and the technological factors must be mutually balanced, and one can adopt as the model parameter as the function of response the coefficient of final oil extraction as the most encompassing information indicator both regarding geological-physical and technological factors which are manifest with exchange of information between the oil deposit and the external world. Since the influence on oil output of both the geological-physical and technological factors is equivalent, then regulation of working can be implemented by modifying any factor. As in any other sciences, mathematical or any other model makes it possible to predict the behavior of the oil deposit based on comparatively low quantity of factual material.

  2. Role of crude oil in the genesis of Mississippi Valley-type deposits. Evidence from the Cincinnati arch

    Energy Technology Data Exchange (ETDEWEB)

    Kesler, S.E.; Jones, H.D. (Univ. of Michigan, Ann Arbor, MI (United States)); Furman, F.C. (Univ. of Missouri, Rolla, MO (United States)); Sassen, R. (Texas A M Univ., College Station, TX (United States)); Anderson, W.H. (Univ. of Kentucky, Lexington, KY (United States)); Kyle, J.R. (Univ. of Texas, Austin, TX (United States))

    1994-07-01

    Mississippi Valley-type (MVT) sulfide minerals and oil from deposits along the Cincinnati arch have almost identical [delta][sup 34]S values (-9% to +9% for MVT sulfides, -12% to +9% for oils). These values are very similar to those for MVT sulfides and oil in the Illinois-Kentucky district and support their proposed inclusion in a regional hydrothermal system. Many MVT deposits with low [delta][sup 34]S values are closely associated with oil, whereas MVT deposits with high [delta][sup 34]S values often contain bitumen. Reduced sulfur in MVT deposits with high [delta][sup 34]S values probably came from thermochemical sulfate reduction, whereas that in MVT deposits with low [delta][sup 34]S values probably came from oil and related organic matter. Oil-related sulfur could have been derived from oil fields or disseminated oil and other organic matter in regional wallrocks. 44 refs., 3 figs., 2 tabs.

  3. Deposition of heavy oil fractions: development of a computational tool to predict oil mixtures compatibility; Deposicao de fracoes pesadas do petroleo: desenvolvimento de uma ferramenta computacional para a previsao da compatibilidade de misturas de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Prucole, Elisia S.; Henriques, Fernanda P.; Silva, Leandro M.; Touma, Silvia L. [PETROBRAS S.A., Rio de de Janeiro, RJ (Brazil)

    2008-07-01

    The remarkable increase in production and processing of national heavy oils is a scenario in which the deposition problem of heavy oil fractions is important, leading to huge losses, not only in economical terms but also in regard to environmental aspects, and can occur in practically all areas of the oil industry. Thus, the knowledge about technology concerning this subject is essential. In terms of heavy fractions, the asphaltenes are the heaviest components of oil and have propensity to aggregate, flocculate, precipitate and be adsorbed on surfaces. The difficulties for modeling the behavior of asphaltenes phases occur because of the high uncertainties which take in the current knowledge about the asphaltenes, their structures, flocculation and precipitation mechanisms and the phenomenon reversibility. The main goal of this work is to propose a predictive methodology for oils compatibility. A fuzzy classifier was implemented in order to predict the compatibility of oil mixtures, assessing whether the mixture condition is stable or not. The results were satisfactory, indicating a good predictive power of the proposed computational tool. (author)

  4. Deposition of naturally occurring radioactivity in oil and gas production

    International Nuclear Information System (INIS)

    Lysebo, I.; Strand, T.

    1997-01-01

    This booklet contains general information about naturally occurring radioactive materials, NORM, in production of oil and natural gas, occupational doses, radiation protection procedures and measures, and classification methods of contaminated equipment. 6 refs., 1 fig., 1 tab

  5. Huge interparietal posterior fontanel meningohydroencephalocele

    Directory of Open Access Journals (Sweden)

    Jorge Félix Companioni Rosildo

    2015-03-01

    Full Text Available Congenital encephalocele is a neural tube defect characterized by a sac-like protrusion of the brain, meninges, and other intracranial structures through the skull, which is caused by an embryonic development abnormality. The most common location is at the occipital bone, and its incidence varies according to different world regions. We report a case of an 1-month and 7-day-old male child with a huge interparietal-posterior fontanel meningohydroencephalocele, a rare occurrence. Physical examination and volumetric computed tomography were diagnostic. The encephalocele was surgically resected. Intradural and extradural approaches were performed; the bone defect was not primarily closed. Two days after surgery, the patient developed hydrocephaly requiring ventriculoperitoneal shunting. The surgical treatment of the meningohydroencephalocele of the interparietal-posterior fontanel may be accompanied by technical challenges and followed by complications due to the presence of large blood vessels under the overlying skin. In these cases, huge sacs herniate through large bone defects including meninges, brain, and blood vessels. The latter present communication with the superior sagittal sinus and ventricular system. A favorable surgical outcome generally follows an accurate strategy taking into account individual features of the lesion.

  6. Mining aspects of hard to access oil sands deposits

    Energy Technology Data Exchange (ETDEWEB)

    Stephenson, G.; Wright, D.; Lukacs, Z. [Norwest Corp., Calgary, AB (Canada)

    2006-07-01

    While a variety of oil sands mining technologies have been explored since the 1960s, the oil sands industry has generally favoured truck and shovel mining as a proven, low-cost mining solution. However, surface mining economics are affected by the price of bitumen, haul distances, tailings storage and geotechnical constraints. Maintenance, labour and the cost of replacing tires and ground engaging tools also have a significant impact on the economics of surface mining. Large volumes of water are used in surface mining, and remediation of surface mined areas can take hundreds of years. Damage to machinery is common as oil sands are abrasive and adhere to equipment. This presentation examined recent technologies developed to improve the economics of surface mining. Various extraction and tailings technologies were reviewed. Issues concerning the integration of mining and extraction processes were discussed. Various monitoring tools were evaluated. A review of new underground mining options included outlines of: longwall mining; sub-level caving; tunnel boring; and room and pillar extraction techniques. A generalized regional geology was presented. It was concluded that the oil sands surfacing mining industry should concentrate on near-term research needs to improve the performance and economics of proven technologies. Screening studies should also be conducted to determine the focus for the development of underground technologies. refs., tabs., figs.

  7. Uniform-sized silicone oil microemulsions: preparation, investigation of stability and deposition on hair surface.

    Science.gov (United States)

    Nazir, Habiba; Lv, Piping; Wang, Lianyan; Lian, Guoping; Zhu, Shiping; Ma, Guanghui

    2011-12-01

    Emulsions are commonly used in foods, pharmaceuticals and home-personal-care products. For emulsion based products, it is highly desirable to control the droplet size distribution to improve storage stability, appearance and in-use property. We report preparation of uniform-sized silicone oil microemulsions with different droplets diameters (1.4-40.0 μm) using SPG membrane emulsification technique. These microemulsions were then added into model shampoos and conditioners to investigate the effects of size, uniformity, and storage stability on silicone oil deposition on hair surface. We observed much improved storage stability of uniform-sized microemulsions when the droplets diameter was ≤22.7 μm. The uniform-sized microemulsion of 40.0 μm was less stable but still more stable than non-uniform sized microemulsions prepared by conventional homogenizer. The results clearly indicated that uniform-sized droplets enhanced the deposition of silicone oil on hair and deposition increased with decreasing droplet size. Hair switches washed with small uniform-sized droplets had lower values of coefficient of friction compared with those washed with larger uniform and non-uniform droplets. Moreover the addition of alginate thickener in the shampoos and conditioners further enhanced the deposition of silicone oil on hair. The good correlation between silicone oil droplets stability, deposition on hair and resultant friction of hair support that droplet size and uniformity are important factors for controlling the stability and deposition property of emulsion based products such as shampoo and conditioner. Copyright © 2011 Elsevier Inc. All rights reserved.

  8. Mechanisms of fat, oil and grease (FOG) deposit formation in sewer lines.

    Science.gov (United States)

    He, Xia; de los Reyes, Francis L; Leming, Michael L; Dean, Lisa O; Lappi, Simon E; Ducoste, Joel J

    2013-09-01

    FOG deposits in sewer systems have recently been shown to be metallic salts of fatty acids. However, the fate and transport of FOG deposit reactant constituents and the complex interactions during the FOG deposit formation process are still largely unknown. In this study, batch tests were performed to elucidate the mechanisms of FOG deposit formation that lead to sanitary sewer overflows (SSOs). We report the first formation of FOG deposits on a concrete surface under laboratory conditions that mimic the formation of deposits in sewer systems. Results showed that calcium, the dominant metal in FOG deposits, can be released from concrete surfaces under low pH conditions and contribute to the formation process. Small amounts of additional oil to grease interceptor effluent substantially facilitated the air/water or pipe surface/water interfacial reaction between free fatty acids and calcium to produce surface FOG deposits. Tests of different fatty acids revealed that more viscous FOG deposit solids were formed on concrete surfaces, and concrete corrosion was accelerated, in the presence of unsaturated FFAs versus saturated FFAs. Based on all the data, a comprehensive model was proposed for the mechanisms of FOG deposit formation in sewer systems. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Deposits of naturally occurring radioactivity in production of oil and natural gas

    International Nuclear Information System (INIS)

    Strand, T.; Lysebo, I.; Kristensen, D.; Birovljev, A.

    1997-01-01

    Deposits of naturally occurring radioactive materials is an increasing problem in Norwegian oil and gas production. Activity concentration in solid-state samples and production water, and doses to workers involved in different operations off-shore, have been measured. The report also includes a discussion of different methods of monitoring and alternatives for final disposal of wastes. 154 refs

  10. The impact of multiphase behaviour on coke deposition in heavy oil hydroprocessing catalysts

    Science.gov (United States)

    Zhang, Xiaohui

    Coke deposition in heavy oil catalytic hydroprocessing remains a serious problem. The influence of multiphase behaviour on coke deposition is an important but unresolved question. A model heavy oil system (Athabasca vacuum bottoms (ABVB) + decane) and a commercial heavy oil hydrotreating catalyst (NiMo/gamma-Al 2O3) were employed to study the impact of multiphase behaviour on coke deposition. The model heavy oil mixture exhibits low-density liquid + vapour (L1V), high-density liquid + vapour (L2V), as well as low-density liquid + high-density liquid + vapour (L1L2V) phase behaviour at a typical hydroprocessing temperature (380°C). The L2 phase only arises for the ABVB composition range from 10 to 50 wt %. The phase behaviour undergoes transitions from V to L2V, to L1L2V, to L1V with increasing ABVB compositions at the pressure examined. The addition of hydrogen into the model heavy oil mixtures at a fixed mass ratio (0.0057:1) does not change the phase behaviour significantly, but shifts the phase regions and boundaries vertically from low pressure to high pressure. In the absence of hydrogen, the carbon content, surface area and pore volume losses for catalyst exposed to the L1 phase are greater than for the corresponding L2 phase despite a higher coke precursor concentration in L2 than in L1. By contrast, in the presence of hydrogen, the carbon content, surface area and pore volume losses for the catalyst exposed to the L2 phase are greater than for the corresponding L1 phase. The higher hydrogen concentration in L1 appears to reverse the observed results. In the presence of hydrogen, L2 was most closely associated with coke deposition, L1 less associated with coke deposition, and V least associated with coke deposition. Coke deposition is maximized in the phase regions where the L2 phase arises. This key result is inconsistent with expectation and coke deposition models where the extent of coke deposition, at otherwise fixed reaction conditions, is asserted to

  11. Evaluation of physical and chemical properties and their interactions in fat, oil, and grease (FOG) deposits.

    Science.gov (United States)

    Gross, Martin A; Jensen, Jeanette L; Gracz, Hanna S; Dancer, Jens; Keener, Kevin M

    2017-10-15

    Fat, oil and grease (FOG) blockages in sewer systems are a substantial problem in the United States. It has been estimated that over 50% of sewer overflows are a result of FOG blockages. In this work, a thorough laboratory study was undertaken to examine key variables that contribute to FOG deposit formation under controlled conditions. Physical and chemical properties and their interactions were evaluated and conditions that generated deposits that mimicked field FOG deposits were identified. It was found that 96 of the of 128 reaction conditions tested in the laboratory formed FOG deposits with similar physical and chemical characteristics as field FOG deposits. It was also found that FOG deposits can be created through fatty acid crystallization and not just saponification. Furthermore FOG deposits were found to be more complex than previously documented and contain free fatty acids, fatty acid metal salts, triacylglycerol's, diacylglycerol's and, monoacylglycerol's. Lastly it was found that FOG deposits that only contained saturated fatty acids were on average 2.1 times higher yield strength than deposits that contained unsaturated fatty acids. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Evidence for fat, oil, and grease (FOG) deposit formation mechanisms in sewer lines.

    Science.gov (United States)

    He, Xia; Iasmin, Mahbuba; Dean, Lisa O; Lappi, Simon E; Ducoste, Joel J; de los Reyes, Francis L

    2011-05-15

    The presence of hardened and insoluble fats, oil, and grease (FOG) deposits in sewer lines is a major cause of line blockages leading to sanitary sewer overflows (SSOs). Despite the central role that FOG deposits play in SSOs, little is known about the mechanisms of FOG deposit formation in sanitary sewers. In this study, FOG deposits were formed under laboratory conditions from the reaction between free fatty acids and calcium chloride. The calcium and fatty acid profile analysis showed that the laboratory-produced FOG deposit displayed similar characteristics to FOG deposits collected from sanitary sewer lines. Results of FTIR analysis showed that the FOG deposits are metallic salts of fatty acid as revealed by comparisons with FOG deposits collected from sewer lines and pure calcium soaps. Based on the data, we propose that the formation of FOG deposits occurs from the aggregation of excess calcium compressing the double layer of free fatty acid micelles and a saponification reaction between aggregated calcium and free fatty acids.

  13. Bituminous breeds oil of Binagady deposite of Azerbaijan

    International Nuclear Information System (INIS)

    Djabbarova, L.U.; Ibadov, N.A.; Akhmedbekova, S.

    2010-11-01

    Full text: Processing of such kinds of raw materials like natural bituminous breeds and combustible shales at present represents as a new and perspective direction for satisfaction of growing demand with motor fuels and chemical raw materials. There are 200 million tons of bituminous breeds in 11 deposits in Azerbaijan. Bitumenkeeping soils can be used while road construction in natural form, as a component of asphalt concrete mixes for coverings and basis. Bitumens are irreplaceable waterproofing material that has a wide use in a nuclear power industry by the help of if its resistance to radiation impact, for entombment of radioactive materials. There were presented the results of carried out works about experimental researches of formation laws of gaseous products from bituminous breeds of Kirmaki deposit site of Azerbaijan. Radiation-thermal transformations of bituminous breeds and liquid products of their thermal decomposition have been studied in a wide range of temperature change, absorbed dose and dose capacity. Formation kinetics had been studied, radiation chemical outputs defined, also the structure of gaseous products of disintegration. [ru

  14. Evaluation of Wax Deposition and Its Control During Production of Alaska North Slope Oils

    Energy Technology Data Exchange (ETDEWEB)

    Tao Zhu; Jack A. Walker; J. Liang

    2008-12-31

    Due to increasing oil demand, oil companies are moving into arctic environments and deep-water areas for oil production. In these regions of lower temperatures, wax deposits begin to form when the temperature in the wellbore falls below wax appearance temperature (WAT). This condition leads to reduced production rates and larger pressure drops. Wax problems in production wells are very costly due to production down time for removal of wax. Therefore, it is necessary to develop a solution to wax deposition. In order to develop a solution to wax deposition, it is essential to characterize the crude oil and study phase behavior properties. The main objective of this project was to characterize Alaskan North Slope crude oil and study the phase behavior, which was further used to develop a dynamic wax deposition model. This report summarizes the results of the various experimental studies. The subtasks completed during this study include measurement of density, molecular weight, viscosity, pour point, wax appearance temperature, wax content, rate of wax deposition using cold finger, compositional characterization of crude oil and wax obtained from wax content, gas-oil ratio, and phase behavior experiments including constant composition expansion and differential liberation. Also, included in this report is the development of a thermodynamic model to predict wax precipitation. From the experimental study of wax appearance temperature, it was found that wax can start to precipitate at temperatures as high as 40.6 C. The WAT obtained from cross-polar microscopy and viscometry was compared, and it was discovered that WAT from viscometry is overestimated. From the pour point experiment it was found that crude oil can cease to flow at a temperature of 12 C. From the experimental results of wax content, it is evident that the wax content in Alaskan North Slope crude oil can be as high as 28.57%. The highest gas-oil ratio for a live oil sample was observed to be 619.26 SCF

  15. Biological marker compounds as indicators of the depositional history of the Maoming oil shale

    Energy Technology Data Exchange (ETDEWEB)

    Brassell, S.C.; Eglinton, G.; Mo, F.J.

    1986-01-01

    The Eocene Maoming oil shale from Guangdong Province occurs as a laterally uniform stratigraphic section, typically 20-25 m thick, from which the aliphatic hydrocarbon constituents of six representative samples were investigated using GC and C-GC-MS. The sediments evaluated included the basal lignite, a vitrinite lens from the overlying claystone, and four intervals from the massive oil shale bed. As expected, the lignite and vitrinite differ markedly from the oil shales. The lignite is dominated by bacterial hopanoids and components of higher plant origin, including C/sub 29/ steroids and triterpenoids such as oleanenes. Visually, the oil shale samples show corroded and degraded phytoclasts, spores, wispy particles of fluorescent organic material attributable to dinoflagellates and, especially in the uppermost sample, colonial algal bodies. The distributions of biological markers in the oil shales show many features in common, notably a dominance of dinoflagellate-derived 4-methylsteroids, and a significant proportion of higher-plant derived n-alkanes with marked odd-over-even carbon number predominance. Overall, they exhibit several features that resemble characteristics of the Messel shale. The hydrocarbons of the lowest shale horizon suggest that there may have been a gradual transition between deposition of the original peat and the subsequent oil shales. The aliphatic hydrocarbons of the uppermost shale are dominated by a number of C/sub 31/ and C/sub 33/ botryococcane homologues and other unusual branched alkanes possibly derived from green algae. All of the samples are immature. Overall, molecular and microscopic examination of the stratigraphic succession of the Maoming oil shale suggests a shallow, lacustrine environment within which peats were deposited. This lake subsequently deepened to support abundant algal populations, especially dinoflagellates, culminating in a dominance of botryococcoid algae.

  16. Impact of oil from the Neftyaniye kamni deposits on physiological and biochemical fishes reproductive functions

    International Nuclear Information System (INIS)

    Kasimov, R.YU; Akhundov, M.M; Vagabova, G.R; Mekhtiev, A.A; Palatnikov, G.M

    2002-01-01

    Full text: The problem of impact of oil and oil products on water organisms has been studying for a long time.However, the main and more profound studies were begun in the middle of seventies of 20th century due to increase of the tanker-mediated oil transportation and exploitation of the oil and gas deposits in the shelf area.Such kind of works was begun for the first time in the Caspian Sea in the N eftyaniye Kamni d eposits.Owing to the fact that the Caspian Sea is very rich with the sturgeon fishes and nearly 70% of the world sturgeon harvests are provided here, that time the wide-scale studies of impact of oil and oil products on water organisms were initiated. However, in these studies the authors' conclusions about oil impact on water organisms were equivocal. Analysis of these and other studies shows that authors mostly studied the values of fish survival and development under exposition to oil impact for a short time. So long-termexperiments with application of more sensitive values weren't accomplished. Beginning since 1965 in Azerbaijan in academy of Sciences and in Fish Industry Institute the comprehensive studies had been conducted on the oil impact on the most important physiological and biochemical values and further on reproductive functions of fishes.The main attention was given to chronic minimal oil concentrations that were present in a number of the Caspian Sea areas. In our investigations changes of defensive, orientation and food-seeking reflexes, changes of quantities of biogenic amines in the fish brains, dynamic of blood values changes, changes of amplitude and duration of evoked potentials of different brain areas,changes of reproduction activities and terms of sexual maturation and rates of gametogenesis in fishes were determined under the impact of oil pollution. The experiments were conducted on sturgeon juveniles and model aqurium fishes guppy. The results showed that crude oil from the Neftyaniye Kamni deposits in concentrations above

  17. Integral anomalous effect of an oil and gas deposit in a seismic wave field

    Energy Technology Data Exchange (ETDEWEB)

    Korostyshevskiy, M.B.; Nabokov, G.N.

    1981-01-01

    The basic precepts of an elaborated version of a procedure for forecasting (direct exploration) of oil and gas deposits according to seismic prospecting data MOV are examined. This procedure was previously called the procedure of analysis of the integral affect of an oil and gas deposit in a seismic wave field (MIIEZ-VP). The procedure is implemented in the form of an automated system ASOM-VP for the BESM-4 computer in a standard configuration equipped with standard input-output devices for seismic information (''Potok'', MVU, ''Atlas''). The entire procedure of processing from input of data into the computer to output of resulting maps and graphs on graph plotter ''Atlas'' is automated. Results of testing of procedure MIIEZ-VP and system ASOM-VP on drilled areas of Kazakhstan, Azerbaydzhan and Uzbekistan are cited.

  18. Influence of fat and oil type on the yield, physico-chemical properties, and microstructure of fat, oil, and grease (FOG) deposits.

    Science.gov (United States)

    Del Mundo, Dann Marie N; Sutheerawattananonda, Manote

    2017-11-01

    Fat, oil, and grease (FOG) deposit, in the form of calcium soap, was found to cause sanitary sewer overflows due to its adhesion on pipe walls. To address this problem, laboratory-prepared calcium soaps have been used to investigate the formation mechanisms of FOG deposits. However, the fats and oils previously utilized were limited and some soap characteristics were not examined. This research attempted to probe through the properties of calcium soaps prepared from calcium chloride and the fats and oils of chicken, pork, palm olein, soybean, olive, and coconut to further understand FOG formation and stability. Results revealed that FOG deposits may occur as smooth, paste-like material or coarse, semi-solid substance depending on their exposure to excess fat/oil and calcium. The smooth soaps with more excess fat/oil demonstrated high apparent viscosity and consistency index, while the coarse soaps with large levels of calcium signified higher melting endset. Moreover, a soap microstructure showing evident networks and lesser void area displayed higher heat and rheological stability, respectively. Overall, fats and oils with higher oleic to palmitic acid ratio such as palm olein oil, olive oil, chicken fat, and pork fat produced soaps with greater yield and degree of saponification. Hence, establishments and authorities should be alert in managing and monitoring these wastes. On the other hand, soybean oil high in linoleic acid and coconut oil high in lauric acid do not pose an immediate threat to the sewer system since they only produced soaps in small quantity. However, their soaps showed high melting endset which could pose a serious effect when accumulated at large amount. On the whole, the fatty acid profile of fats and oils, the presence of excess fat/oil, and calcium content mainly dictate the appearance, melting, rheology, and microstructure of calcium soaps. Their distinct properties can be used as criteria in predicting the condition and stability of FOG

  19. Radiocaesium activity in rape oil and in rape cake after a wet deposition event

    Energy Technology Data Exchange (ETDEWEB)

    Chaiko, Y.; Rappe-George, M.; Bengtsson, S. [Department of Soil and Environment (Sweden)

    2014-07-01

    After a release of radionuclides in agricultural areas there can be concerns on the levels of radionuclides in food products produced. The uptake of radionuclides via the above ground plant parts is a very important transport route into the food chain for humans as caesium is relatively mobile inside plants. In the production of rape oil the use of a processing factor (Pf) is used to estimate the activity concentration of radioactivity in the final oil product based on the activity concentration in rape seeds. The processing factor has been estimated to be 0.004 for caesium in rape oil by IAEA, and is based on a limited numbers of studies (1). In this project we analysed the activity concentration of radiocaesium ({sup 134}Cs) in rape oil and in rape cake from rape seeds contaminated after a wet deposition event with {sup 134}Cs. With the information of activity concentration of {sup 134}Cs in rape oil and in rape cake, we calculated the Pf-value and confirm or suggest new enhanced Pf-value. We analysed the activity concentration of {sup 134}Cs in rape oil and in rape cake from spring oilseed rape seeds (Brassica napus L.) that had been contaminated experimentally by wet deposited {sup 134}Cs in an earlier experiment by Bengtsson et al. (2013). The estimation of activity concentration of {sup 134}Cs in rape oil and in rape cake was achieved by performing extraction of the oil (and other extractable compounds) from the seeds based on the Randall extraction method (Randall, 1974) using petroleum ether as extraction chemical. The extracted oil and the rape cake samples were weighed and the activity concentration was measured with High-Purity Germanium (HPGe) detectors. Pf-values were calculated by dividing the measured activity concentration in rape oil after extraction by the activity concentration in oilseed rape seeds before extraction. Results from the present study will be presented at the international conference on radioecology and environmental radioactivity

  20. Mud Lake, a modern analog of oil shale deposition in Florida

    Energy Technology Data Exchange (ETDEWEB)

    Burgess, J.D.

    1987-01-01

    Mud Lake in north-central Florida was identified by Bradley as an analog of oil shale-type kerogen deposition. This lake supports an abundant diatom and algal flora which is unique in that the accumulating algal ooze does not decay as long as it stays oxygenated. This same material does not nutritionally support many invertebrates, owing to its flocculent consistency and apparent indigestibility, although fish are abundant and an occasional crocodile is found in the lake. Accumulation of the algal ooze is very slow at roughly 1 foot per 52,000 years based on radiocarbon dates. An understanding of oil shale depositional conditions could be translated into a predictive model for location and recognition of hydrocarbon generating source rocks. When oil shales are mentioned the first association is likely to be that with the Eocene Green River Formation of the Western US. Conditions leading to deposition and preservation of this massive quantity of organic debris is difficult to comprehend, but recognition of modern analogs provide an available area for study and comparison.

  1. Environmentally safe oil-field reagents for development and operation of oil-gas deposits

    Science.gov (United States)

    Fakhreeva, A. V.; Manaure, D. A.; Dokichev, V. A.; Voloshin, A. I.; Telin, A. G.; Tomilov, Yu V.; Nifantiev, N. E.

    2018-04-01

    Sodium-carboxymethylcellulose and arabinogalactane inhibits the crystallization of calcium carbonate from a supersaturated aqueous solution at 80°C. The sizes of formed crystals CaCO3 in the presence of arabinogalactane, sodium-carboxymethylcellulose and neonol AF 9-10 decrease on an average 7-12 μm and a change of their structure. It is expected, that the mechanism of inhibitionis in specific adsorption polysaccharides and neonol on occurring crystalline surface of the calcium carbonate, both at the expense of electrostatic interaction of functional groups with Ca2+ ions, located on the surface of the crystal, and due to coordination and hydrogen bonds with oxygen atoms and HO-groups of additives. Oil-water emulsion rheology in the presence of neonol AF 9-10 has been studied. It is shown that neonol AF 9-10 decrease viscosity natural water-oil emulsion by 25 times. Addition of 5% neonol to water-oil emulsion leads to formation more than 20 stable emulsion forms of different density and composition. New highly effective “green” oilfield reagents have been developed on the basis of neonol and natural polysaccharides.

  2. Oil sands development and its impact on atmospheric wet deposition of air pollutants to the Athabasca Oil Sands Region, Alberta, Canada

    International Nuclear Information System (INIS)

    Lynam, Mary M.; Dvonch, J. Timothy; Barres, James A.; Morishita, Masako; Legge, Allan; Percy, Kevin

    2015-01-01

    Characterization of air pollutant deposition resulting from Athabasca oil sands development is necessary to assess risk to humans and the environment. To investigate this we collected event-based wet deposition during a pilot study in 2010–2012 at the AMS 6 site 30 km from the nearest upgrading facility in Fort McMurray, AB, Canada. Sulfate, nitrate and ammonium deposition was (kg/ha) 1.96, 1.60 and 1.03, respectively. Trace element pollutant deposition ranged from 2 × 10"−"5 - 0.79 and exhibited the trend Hg < Se < As < Cd < Pb < Cu < Zn < S. Crustal element deposition ranged from 1.4 × 10"−"4 – 0.46 and had the trend: La < Ce < Sr < Mn < Al < Fe < Mg. S, Se and Hg demonstrated highest median enrichment factors (130–2020) suggesting emissions from oil sands development, urban activities and forest fires were deposited. High deposition of the elements Sr, Mn, Fe and Mg which are tracers for soil and crustal dust implies land-clearing, mining and hauling emissions greatly impacted surrounding human settlements and ecosystems. - Highlights: • Atmospheric event wet deposition was collected during a 21 month pilot study. • Major ion, anthropogenic and crustal element wet deposition was characterized. • Low precipitation depths attenuated major ion and anthropogenic element deposition. • Oil sands development, urban activities and forest fires contributed to deposition. - In the vicinity of oil sands, monitoring revealed that wet deposition of major ions (SO_4"2"−, NO_3"-, NH_4"+) was highest followed by S and Mg, the latter is a tracer for soil/crustal dust.

  3. Thickness of Lipid Deposition on Oral Surfaces Depending on Oil Content and Its Influence on Mouthfeel Perception

    Directory of Open Access Journals (Sweden)

    Urška Pivk Kupirovič

    2012-01-01

    Full Text Available Lipid content in food strongly influences food perception on the level of textural properties. Lipids in contact with the tongue and palate are substantially responsible for the sensory impact of a product. The aim of this study is to investigate the impact of oil content on the thickness of lipid deposition on oral surface as well as on the mouthfeel perception. The fluorescent probe method was used to study the thickness of lipid deposition on oral surface. We observed an increase in the thickness of lipid deposition depending on the increase of oil content in oil/water dispersions. Clear correlation was shown between the thickness of lipid deposition on oral surfaces and the perception of mouthfeel. A direct measure of undisrupted deposition of food components on oral surface contributes to the understanding of the behaviour of food components in the mouth and their influence on mouthfeel perception.

  4. Geochemical Aspects of Formation of Large Oil Deposits in the Volga-Ural Sedimentary Basin

    Science.gov (United States)

    Plotnikova, I.; Nosova, F.; Pronin, N.; Nosova, J.; Budkevich, T.

    2012-04-01

    The study of the rocks domanikoid type in the territory of the Ural-Volga region has an almost century-long history, beginning with the first studies of A.D. Archangelsky in the late 20's of last century. But nevertheless the question of the source of oil that formed the industrial deposits of Volga-Ural oil and gas province (OGP), where Romashkinskoye oil field occupies a special place, remains unresolved and topical. According to the sedimentary-migration theory of origin of oil and gas, it is supposed that the primary source of hydrocarbons in this area are the deposits of domanikoid type that contain a large ammount of sapropel organic matter (OM). Semiluki (domanik) horizon of srednefranski substage of the Upper Devonian is considered to be a typical domanikoid stratum. Investigation of the OM of the rocks and oils of the sedimentary cover on the basis of chromato-mass spectrometry method allows us to study the correlations between rock and oil and to assess the location (or absence) of the sources of hydrocarbons in the Paleozoic sedimentary cover. The results of geochemical study of dispersed organic matter (DOM) of rocks from Semiluksky horizon of the Upper Devonian and of the oil from Pashiysky horizon of the Middle Devonian form the basis of this paper. The objectives of this study were the following: to determine the original organic matter of the rocks, which would indicate the conditions of sedimentation of the supposed rock-oil sources; the study of chemofossils (biomarkers) in oil from Pashiyskiy horizon; and the identification of genetic association of DOM rocks from Semiluksky horizon with this oil on the basis of the oil-DOM correlation. The study of biomarkers was carried out with the help of chromato-mass spectrometry in the Laboratory of Geochemistry of Fossil Fuels (Kazan Federal University). In this study we used several informative parameters characterizing the depositional environment, the type of source OM and its maturity: STER / PENT, h

  5. Design investigation of the HTR for the opening of very heavy oil deposits

    International Nuclear Information System (INIS)

    Gao, Z.

    1985-02-01

    In the north-east of China there are rich deposits of very heavy oil, which are to be found in a depth of 1500-1700 m. For opening an interaction of 370-390 0 Celsius steam is necessary. The HTR is well suited to produce the steam. A nuclear heat source of 1000 MWsub(th) makes possible the production of 1.5 million tons oil per year. This is a 30-40 per cent higher production of oil compared to the oil-fired steam production. Two concepts of smaller pebble bed reactors are suited as heat sources: the HTR-MEDUL-334 with a thermal power of the 334 MW and fuelled in the multiple run-through scheme and the HTR-OTTO-200 with 200 MW and once-through fuelling. Three or five reactors can be combined in the modular way to provide the power of 1000 MW. For both reactors the design, the neutron-physical and thermohydraulic behaviour are followed in the computer simulation. A central zone of the pebble bed reactor is fuelled with elements of strongly reduced fissile content. Due to the reduced power density the maximum fuel temperature appearing in extreme accidents is limited and accordingly the release of the fission products is avoided. (orig.) [de

  6. Pollutant deposition impacts on lichens, mosses, wood and soil in the Athabasca oil sands area

    International Nuclear Information System (INIS)

    Pauls, R.W.; Abboud, S.A.; Turchenek, L.W.

    1996-01-01

    A study was conducted to monitor the accumulation and impact on the environment of emissions from oil sands processing plants. SO 2 , H 2 S, NO x and hydrocarbon concentrations in the air were monitored. Syncrude Canada Ltd. conducted surveys to determine elemental levels in lichens and mosses. The objective of the study was to monitor the pattern of accumulation of emissions by oil sand plants in, and their effects on, lichens and mosses, and examine changes in wood induced by soil acidity. The moss, lichen and wood samples were analyzed for total elemental content. Soils were analyzed for pH, soluble sulphate and other properties related to soil acidity and soil composition. Little or no evidence was found to indicate that wood tissue chemistry has been affected by atmospheric deposition of substances originating from oil sands plants. These results led to the inference that no large changes in soil acidity have resulted from oil sands plant emissions either. 66 refs., 21 tabs., 124 figs

  7. Depositional environments and oil potential of Jurassic/Cretaceous source rocks within the Seychelles microcontinent

    Energy Technology Data Exchange (ETDEWEB)

    Plummer, P.S.; Joseph, P.R.; Samson, P.J. [Seychelles National Oil Co., Mahe (Seychelles)

    1998-12-31

    The Seychelles microcontinent became isolated between the Somali, Mascarene and Arabian basins of the Indian Ocean as a result of the Mesozoic fragmentation of Gondwana. Major rifting events occurred during the Triassic-Middle Jurassic and Late Cretaceous (Cenomanian-Santonian and Maastrichtian) during which shaly source rock facies accumulated in principally marginal marine/deltaic environments. Between these times, post-rift passive margin deposition within restricted to open marine environments produced shaly source rocks during late Middle Jurasic-Early Cretaceous, Campanian-Maastrichtian and Paleocene times. Recent geochemical analysis of cuttings from the Seagull Shoals-1 well has identified an oil-prone liptinitic (Type II) coaly shale within early Middle Jurassic abandoned deltaic deposits. This coaly source rock is regionally developed, having also been identified in the Majunja and Morondava basins of Madagascar. Oil-prone Type II organic matter has also been identified in the Owen Bank A-1 well within restricted marine shales of late Middle Jurassic age. These shales are part of a thick post-rift source rock sequence that extends into the Early Cretaceous and is in part correlative with the proven Late Jurassic Uarandab Shale of Somalia. Analysis of Campanian marine shales from Reith Bank-1 well identified significant dilution of total organic carbon content in composite, compared to picked, well cuttings samples. This finding supports a published inference that these post-rift shales have source rock potential. (author)

  8. Forecasting sandstone uranium deposits in oil-and-gas bearing basins

    International Nuclear Information System (INIS)

    Pechenkin, I.

    2014-01-01

    The interrelation between oxidation and reduction processes in the carbonaceous strata of Paleogene age was first studied in the 1950s in deposit of the Fergana depression. The presence of pre-ore and post-ore epigenesis of petroleum series was established. Part of uranium mineralization was found to be covered with fluid oil. In the middle of the 1960s in the Sabirsay deposit (Uzbekistan) in primary red-coloured continental sediment of Cretaceous age were studied pre-ore reduction changes, which caused economic uranium mineralization in contrasting geochemical barrier. Further research showed that multidirectional epigenetic processes had changed repeatedly. Later, in the 1970s, American geologists studying uranium deposits in the oil-and-gas bearing Texas Plain reached similar conclusions. From their point of view, in the Benevides deposit the main zones of mineralization tend to be located near the boundary where the zones of oxidation in the strata wedge in, developing in epigenetically reduced formations. A second post-mineral reduction was registered in a number of rock bodies. The complexity of the processes is determined by the double role of hydrocarbon fluids and the products of their dissolution. On the one hand, bituminization of permeable strata as well as pyritization, chloritization, dolomitization and other alterations associated with it create favourable geochemical conditions of a reducing character for a subsequent concentration of ore and nonmetal raw materials. On the other hand, intrusion of bitumen and its dissolution in the aeration zone leads to the burial of the mineralization which formed earlier and disappearance of all traces of its formation (epigenetic oxidation zoning). Thus forecasting and subsequent prospecting become impeded. The established sequence of epigenetic alterations allows us to carry out specialized mapping in productive regions, uncovering hidden parts of epigenetic oxidation zoning and “buried” mineralization

  9. Deposition of NORM generated by the oil and gas industries in Brazil

    International Nuclear Information System (INIS)

    Schenato, Flavia; Aguiar, Lais A.; Leal, Marco Aurelio; Ruperti Junior, Nerbe

    2013-01-01

    The natural occurring radioactive material (NORM) produced during E and P activities in the petroleum industry presents important implications for the management of solid wastes. The waste management strategy and final disposal policy regarding NORM should meet general radiation protection principles to ensure the long periods during which control may be necessary. The Brazilian Nuclear Energy Commission (CNEN) is responsible for the final destination of the radioactive waste produced in national territory. The Federal Law 10308/2001 establishes standards for the final destination of the radioactive waste providing information to the installation and operation of storage and disposal facilities. The licensee is responsible for the storage facilities, while CNEN is in charge of design, construction and installation of final disposal facilities, being possible to delegate such activities to a third parties, since preserved its full responsibility. The CNEN's Resolution on licensing of radioactive waste deposits, which is in the final approval stage, classifies the wastes generated by the E and P oil and gas industries and suggests two disposal methods to them, near surface and depth repositories, to be defined by safety analysis, but no formal criteria for disposal is really established. The guidelines for the safety analysis set for the licensing process of this class of waste is applied only to the implementation of interim storage facilities but not to repositories. Considering the large volume of NORM generated by the activities of E and P oil and gas industries and the growing demand of production with the exploration of pre-salt oil deposits in Brazil, this paper aims to discuss the development of national guidelines for the disposal of this class of waste to ensure long term safety and acceptability of disposal methods. (author)

  10. Experimental investigation on the effect of ultrasonic waves on reducing asphaltene deposition and improving oil recovery under temperature control.

    Science.gov (United States)

    Rezaei Dehshibi, Reza; Mohebbi, Ali; Riazi, Masoud; Niakousari, Mehrdad

    2018-07-01

    A well-known complication in the oil reservoir during oil production is asphaltene deposition in and around the production wellbore. Deposition of asphaltene around the production wellbore may cause a significant pressure drop and in turn loss of efficiency in the production process. Various mechanical and chemical methods have been employed in order to reduce asphaltene formation or to eliminate the precipitate. A novel technique which presented a great potential for prevention or elimination of asphaltene is spreading out the high energy ultrasound wave within the oil reservoir. In this study, in a glass micro-model, asphaltene precipitation was first simulated in a transparent porous medium and its removal by application of high energy ultrasound wave was then investigated. To simulate asphaltene precipitation, the micro-model was first saturated with oil and then a normal-pentane was injected. This was followed by flooding the porous media with brine while propagating ultrasound waves (30 kHz and 100 W) to eliminate asphaltene precipitation. The experiment setup was equipped with a temperature controller. The results indicate a significant reduction in asphaltene precipitation in the oil reservoir may be achieved by application of ultrasound energy. Asphaltene particle deposition has been solved reversibly in the oil layer of porous medium and with the oil layering mechanism, the rate of oil production has been increased. In some spots, water/oil emulsion has been formed because of the ultrasonic vibration on the wall. Both the crude and synthetic oils were examined. Copyright © 2018 Elsevier B.V. All rights reserved.

  11. Connecting slow earthquakes to huge earthquakes.

    Science.gov (United States)

    Obara, Kazushige; Kato, Aitaro

    2016-07-15

    Slow earthquakes are characterized by a wide spectrum of fault slip behaviors and seismic radiation patterns that differ from those of traditional earthquakes. However, slow earthquakes and huge megathrust earthquakes can have common slip mechanisms and are located in neighboring regions of the seismogenic zone. The frequent occurrence of slow earthquakes may help to reveal the physics underlying megathrust events as useful analogs. Slow earthquakes may function as stress meters because of their high sensitivity to stress changes in the seismogenic zone. Episodic stress transfer to megathrust source faults leads to an increased probability of triggering huge earthquakes if the adjacent locked region is critically loaded. Careful and precise monitoring of slow earthquakes may provide new information on the likelihood of impending huge earthquakes. Copyright © 2016, American Association for the Advancement of Science.

  12. Handling of natural occurring radioactive deposits in the oil and gas industry in Norway, United Kingdom and the Netherlands

    International Nuclear Information System (INIS)

    Lysebo, I.; Tufto, P.

    1999-03-01

    Deposits containing naturally occurring radioactive materials is an increasing problem in oil and gas production. Laws and regulations in this area is under preparation, and it is a wish for harmonization with the other oil and gas producing countries in the North Sea. The report gives an overview of amounts of waste and activity levels, decontamination methods and waste handling in Norway, Great Britain and the Netherlands

  13. Huge cystic craniopharyngioma with unusual extensions

    Energy Technology Data Exchange (ETDEWEB)

    Kitano, I.; Yoneda, K.; Yamakawa, Y.; Fukui, M.; Kinoshita, K.

    1981-09-01

    The findings on computed tomography (CT) of a huge cystic craniopharyngioma in a 3-year-old girl are described. The cyst occupied both anterior cranial fossae and a part of it extended to the region of the third ventricle which was displaced posteriorly. The tumor showed no contrast enhancement after the intravenous administration of contrast medium.

  14. Dependences of deposition rate and OH content on concentration of added trichloroethylene in low-temperature silicon oxide films deposited using silicone oil and ozone gas

    Science.gov (United States)

    Horita, Susumu; Jain, Puneet

    2018-03-01

    We investigated the dependences of the deposition rate and residual OH content of SiO2 films on the concentration of trichloroethylene (TCE), which was added during deposition at low temperatures of 160-260 °C with the reactant gases of silicone oil (SO) and O3. The deposition rate depends on the TCE concentration and is minimum at a concentration of ˜0.4 mol/m3 at 200 °C. The result can be explained by surface and gas-phase reactions. Experimentally, we also revealed that the thickness profile is strongly affected by gas-phase reaction, in which the TCE vapor was blown directly onto the substrate surface, where it mixed with SO and O3. Furthermore, it was found that adding TCE vapor reduces residual OH content in the SiO2 film deposited at 200 °C because TCE enhances the dehydration reaction.

  15. Physical and Chemical Characterization of Fat and Oil Deposits in Mashhad City Sewer Lines and the Solutions Developed

    Directory of Open Access Journals (Sweden)

    Mahdi kamali

    2017-01-01

    Full Text Available Formation of oil, fat, and grease deposits in sewer pipelines is a major concern as they result in sewage overflow and pose health problems. Analysis of two sample deposits collected from the sewer lines of Imam Reza Street in the city of Mashhad suggested that the chemical reactions promoted by edible oils in the sewer lines lead to the formation of insoluble soap and deposits. Being sticky, the deposits accumulate over time to eventually block the lines. The analysis also showed that the moisture content of the samples ranged between 50‒62%, indicating that water does not play a main role in their formation. The samples were also found to contain 61.78% and 84.35% saturated fatty acids, with palmitic acid being the dominant one. Calcium was the main metal in the samples, which is due to both water hardness and corrosion of the sewer lines. Based on the results obtained, the origin of these deposits, and the relevant protocols for the management of oil and fat wastes, solutions were proposed to prevent deposit formation and sewer line clogging that suit the special cultural and environmental conditions of the city. These proposals are under consideration for implementation in the region.

  16. The Use of Biobased Surfactant Obtained by Enzymatic Syntheses for Wax Deposition Inhibition and Drag Reduction in Crude Oil Pipelines

    Directory of Open Access Journals (Sweden)

    Zhihua Wang

    2016-04-01

    Full Text Available Crude oil plays an important role in providing the energy supply of the world, and pipelines have long been recognized as the safest and most efficient means of transporting oil and its products. However, the transportation process also faces the challenges of asphaltene-paraffin structural interactions, pipeline pressure losses and energy consumption. In order to determine the role of drag-reducing surfactant additives in the transportation of crude oils, experiments of wax deposition inhibition and drag reduction of different oil in pipelines with a biobased surfactant obtained by enzymatic syntheses were carried out. The results indicated that heavy oil transportation in the pipeline is remarkably enhanced by creating stable oil-in-water (O/W emulsion with the surfactant additive. The wax appearance temperature (WAT and pour point were modified, and the formation of a space-filling network of interlocking wax crystals was prevented at low temperature by adding a small concentration of the surfactant additive. A maximum viscosity reduction of 70% and a drag reduction of 40% for light crude oil flows in pipelines were obtained with the surfactant additive at a concentration of 100 mg/L. Furthermore, a successful field application of the drag-reducing surfactant in a light crude oil pipeline in Daqing Oilfield was demonstrated. Hence, the use of biobased surfactant obtained by enzymatic syntheses in oil transportation is a potential method to address the current challenges, which could result in a significant energy savings and a considerable reduction of the operating cost.

  17. Dynamics of waterflooding massive oil deposits in the Chechen Ingush ASSR, including fissured reservoirs in the late stages of development

    Energy Technology Data Exchange (ETDEWEB)

    Tatashev, K.Kh.; Soboleva, G.N.; Tagunova, A.V.

    1979-01-01

    In 1956 in the Chechen Ingush ASSR a number of massive oil deposits located in fissured cavernous Upper Cretaceous limestone were developed. The deposits were developed by water-oil displacement from the edges and pericline toward the dome of the structure using the natural water pressure drive as well as artificial marginal flooding. The great oil-bearing capacity, the good hydrodynamic link with the deposit, the close magnitude of oil viscosity and water under the layer conditions and the significant difference in their density (0.4-0.5 g/cm/sup 3/) practically guarantees pistonlike oil displacement. Based on the deposit's geologic-physical characteristics, the late stage of development may be characterized by noncontinuous time and a sharp increase in well waterflooding to maintain full flooding. However, the data obtained from working the field suggest that a sharp increase in waterflooding will be substituted by a slow increase, by stabilization and possibly even a decrease in the percentage of water over the last 3-6 years. This occurred in a number of cases where measures were taken to limit the liquid flow, to periodically operate the well with isolated waterflooding and pereclinal perforation at intervals. This also occurred in a number of cases where the rate of fluid yield was naturally lowered by decreasing the number of producing wells due to waterflooding and disengagement. To more completely extract the oil from relatively low permeable areas of the deposits and to develop them in the later stages, it is useful to use a slow tempo once all wells have been brought to perclinal interval operation.

  18. Enriching acid rock drainage related microbial communities from surface-deposited oil sands tailings.

    Science.gov (United States)

    Dean, Courtney; Xiao, Yeyuan; Roberts, Deborah J

    2016-10-01

    Little is known about the microbial communities native to surface-deposited pyritic oil sands tailings, an environment where acid rock drainage (ARD) could occur. The goal of this study was to enrich sulfur-oxidizing organisms from these tailings and determine whether different populations exist at pH levels 7, 4.5, and 2.5. Using growth-based methods provides model organisms for use in the future to predict potential activities and limitations of these organisms and to develop possible control methods. Thiosulfate-fed enrichment cultures were monitored for approximately 1 year. The results showed that the enrichments at pH 4.5 and 7 were established quicker than at pH 2.5. Different microbial community structures were found among the 3 pH environments. The sulfur-oxidizing microorganisms identified were most closely related to Halothiobacillus neapolitanus, Achromobacter spp., and Curtobacterium spp. While microorganisms related to Chitinophagaceae and Acidocella spp. were identified as the only possible iron-oxidizing and -reducing microbes. These results contribute to the general knowledge of the relatively understudied microbial communities that exist in pyritic oil sands tailings and indicate these communities may have a potential role in ARD generation, which may have implications for future tailings management.

  19. Effect of trichloroethylene enhancement on deposition rate of low-temperature silicon oxide films by silicone oil and ozone

    Science.gov (United States)

    Horita, Susumu; Jain, Puneet

    2017-08-01

    A low-temperature silcon oxide film was deposited at 160 to 220 °C using an atmospheric pressure CVD system with silicone oil vapor and ozone gases. It was found that the deposition rate is markedly increased by adding trichloroethylene (TCE) vapor, which is generated by bubbling TCE solution with N2 gas flow. The increase is more than 3 times that observed without TCE, and any contamination due to TCE is hardly observed in the deposited Si oxide films from Fourier transform infrared spectra.

  20. Deposits of naturally occurring radioactivity in production of oil and natural gas; Radioaktive avleiringer i olje- og gassproduksjon

    Energy Technology Data Exchange (ETDEWEB)

    Strand, T; Lysebo, I; Kristensen, D; Birovljev, A

    1997-01-01

    Deposits of naturally occurring radioactive materials is an increasing problem in Norwegian oil and gas production. Activity concentration in solid-state samples and production water, and doses to workers involved in different operations off-shore, have been measured. The report also includes a discussion of different methods of monitoring and alternatives for final disposal of wastes. 154 refs.

  1. Statistical modelling of Fat, Oil and Grease (FOG) deposits in wastewater pump sumps.

    Science.gov (United States)

    Nieuwenhuis, Eva; Post, Johan; Duinmeijer, Alex; Langeveld, Jeroen; Clemens, François

    2018-05-15

    The accumulation of FOG (Fat, Oil and Grease) deposits in sewer pumping stations results in an increase in maintenance costs, malfunctioning of pumps and, a potential increase of wastewater spills in receiving open water bodies. It is thought that a variety of parameters (e.g. geometry of the pump sump, pump operation, socioeconomic parameters of the catchment) influences the built-up of FOG. Based on a database containing data of 126 pumping stations located in five Dutch municipalities a statistical model was built. It is shown that 3 parameters are most significant in explaining the occurrence of FOG deposits: mean income of the population in a catchment, the amount of energy (kinetic and potential) per m 3 per day and the density of restaurants, bars and hotels in a catchment. Further it is shown that there are significant differences between municipalities that can be traced back to the local 'design paradigm'. For example, in Amsterdam, the design philosophy of discharging in the pump sump under the water surface (and hence maintaining a low level of turbulence in the pump sump) results in an increase of the probability of the formation of FOG. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  2. Huge Thornwaldt's Cyst: A Case Report

    Directory of Open Access Journals (Sweden)

    Jia-Hau Lin

    2006-10-01

    Full Text Available Thornwaldt's bursa, also known as nasopharyngeal bursa, is a recess in the midline of the nasopharynx that is produced by persistent notochord remnants. If its opening becomes obstructed, possibly due to infection or a complication from adenoidectomy, a Thornwaldt's cyst might develop. Here, we present a 53-year-old man who complained of nasal obstruction that had progressed for 1 year. Nasopharyngoscopy showed a huge nasopharyngeal mass. Thornwaldt's cyst was suspected. Magnetic resonance imaging showed a lesion measuring 3.6 × 3.4 cm, intermediate on T1-weighted and high signal intensity on T2-weighted imaging, neither bony destruction nor connection to the brain. The patient underwent endoscopic surgery for this huge mass. Afterwards, his symptoms improved significantly. We present the treatment and differential diagnosis of a nasopharyngeal cyst.

  3. Connecting slow earthquakes to huge earthquakes

    OpenAIRE

    Obara, Kazushige; Kato, Aitaro

    2016-01-01

    Slow earthquakes are characterized by a wide spectrum of fault slip behaviors and seismic radiation patterns that differ from those of traditional earthquakes. However, slow earthquakes and huge megathrust earthquakes can have common slip mechanisms and are located in neighboring regions of the seismogenic zone. The frequent occurrence of slow earthquakes may help to reveal the physics underlying megathrust events as useful analogs. Slow earthquakes may function as stress meters because of th...

  4. From tiny microalgae to huge biorefineries

    OpenAIRE

    Gouveia, L.

    2014-01-01

    Microalgae are an emerging research field due to their high potential as a source of several biofuels in addition to the fact that they have a high-nutritional value and contain compounds that have health benefits. They are also highly used for water stream bioremediation and carbon dioxide mitigation. Therefore, the tiny microalgae could lead to a huge source of compounds and products, giving a good example of a real biorefinery approach. This work shows and presents examples of experimental...

  5. Robust and durable superhydrophobic fabrics fabricated via simple Cu nanoparticles deposition route and its application in oil/water separation.

    Science.gov (United States)

    Wang, Jintao; Wang, Hongfei

    2017-06-15

    The exploitation of separation materials with high selectivity for oil pollutants is of great importance due to severe environmental damage from oil spillages and industrial discharge of oils. A facile in situ growth process for creating superhydrophobic-superoleophilic fabrics for oil-water separation is developed. This proposed method is based mainly on the deposition Cu nanoparticles and subsequent hydrophobic modification. Compared with the hydrophilicity of original fabric, the water contact angle of the modified fabric rises to 154.5°, suggesting its superhydrophobicity. The as-prepared fabrics also exhibit wonderful oil-water selectivity, excellent recyclability, and high separation efficiency (>94.5%). Especially, via pumping the fabric rolled into a multilayered tube, various types of oils on water surface can be continuously separated in situ without any water uptake. Furthermore, the superhydrophobic fabrics show excellent superhydrophobic stability, and can resist different chemicals, such as salty, acidic, and alkaline solutions, oils, and hot water. After the abrasion of 400cycles, the broken fabric still possesses highly hydrophobicity with water contact angle of 145°. Therefore, due to simple fabrication steps, low cost, and scalable process, the as-prepared fabrics can be applied in the separation of oils and other organic solvents from water. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Geochemical dispersion associated with uranium deposits in sandstone roll front type and its relationship to the Orinoco Oil Belt, Venezuela

    International Nuclear Information System (INIS)

    Manrique, J.

    2014-01-01

    In Venezuela, there is a potential for the formation of uranium deposits in areas such as the Guiana Shield, the south of the Eastern Basin, the Andes and the massif of Baúl, among other areas. Especially great interest is the exploration of uranium redox interface type (roll front), in areas such as the southern part of the Orinoco Oil Belt, north and northwest of the Guiana Shield, where groundwater uranium collecting the weathering shield flowing northward in the sandstones and mudstones of the Cretaceous to Quaternary formations, which constitute the southern boundary of the Eastern basin Venezuela. The presence of gas, extra-heavy crude oil, bitumen and lignite of the Orinoco Oil Belt can be an effective barrier for uranium in solution, which may have precipitated at the redox interface of this groundwater. This process certainly was more effective before the Orinoco river take its course to the east and the waters of small rivers and large draining shield contributed to uranium aquifers became more deep north. This work was based on a qualitative model describing geochemical dispersion associated with uranium deposits in sandstone, roll front type, which indicates that the daughter isotopes "2"3"8U, which can migrate extensively are: "2"2"2Rn, "4He, and in a smaller proportion: "2"2"6Ra and "2"2"2Rn daughters ("2"1"4Bi, "2"1"0Pb). The main exploration methods were established, which can be applied in areas of the Orinoco Oil Belt, north of the Guiana Shield, and areas west of this, among the most important are: soil measurements of radon and helium near faults, sampling soils with gamma spectrometry analysis, log interpretation of oil wells in the area of interest to establish gamma – lithological anomalies, ground water analysis of uranium, radon, radium, helium, vanadium, selenium, molybdenum, analysis of samples oil drilling cores to locate anomalous stratigraphic levels. This research will provide the basis to establish methodologies for uraniferous

  7. Buriti oil (Mauritia flexuosa L.) negatively impacts somatic growth and reflex maturation and increases retinol deposition in young rats.

    Science.gov (United States)

    Medeiros, Maria C; Aquino, Jailane S; Soares, Juliana; Figueiroa, Edigleide B; Mesquita, Hanni M; Pessoa, Debora C; Stamford, Tania M

    2015-11-01

    Buriti oil contains nutrients such as essential fatty acids and vitamins, which are directly involved with neonates' development. However, the refining process of this oil can change its nutrient profile. This study investigated the effects of maternal consumption of Buriti oil (crude or refined), on reflex and somatic development and retinol levels in neonatal rats. Thirty-six Wistar male neonate rats born from mothers who consumed diet with 7% lipids during gestation and lactation were used. Rats were randomized into three groups: rats receiving diet added of soybean oil (control-CG), crude Buriti oil (CB) and refined Buriti oil (RB). Offspring weight, tail length, reflex ontogeny and somatic maturation were assessed during lactation. At the end of the experiment, serum and liver retinol concentrations were measured. Animals from CB and RB groups showed delayed onset of palm grasp, righting reflex and cliff avoidance reflexes compared to the control group (CG). However, animals from RB group showed anticipation of auditory startle compared to those from BC group. Regarding somatic maturation indicators, animals from RB group showed delayed eye opening and eruption of superior and inferior incisors in relation to control and anticipation in the auditory conduit opening in relation to CB group. Rats from CB and RB groups showed higher serum and liver vitamin A contents. Buriti oil delays physical parameters and reflex maturation and increases serum and liver retinol deposition among neonatal rats. Copyright © 2015. Published by Elsevier Ltd.

  8. Sedimentological and Scanning Electron Miscroscopic Descriptions of Afowo Oil Sand Deposits, South Western Nigeria

    Directory of Open Access Journals (Sweden)

    Akinmosin A

    2017-12-01

    Full Text Available Sedimentological and scanning electron microscopic analyses of some shallow reservoir tar sand samples in parts of Southwestern Nigeria were carried out with the aim of characterizing the reservoir properties in relation to bitumen saturation and recovery efficiency. The production of impregnated tar from the sands requires the reservoir to be of good quality. A total of thirty samples were collected at different localities within the tar sand belt (ten out of these samples were selected for various reservoir quality analyses based on their textural homogeneity. The result of particle size distribution study showed that bulk of the sands is medium – coarse grained and moderately sorted. The grain morphologies are of low to high sphericity with shapes generally sub-angular to sub-rounded, implying that the sands have undergone a fairly long transportation history with depositional energy having a moderate to high velocity. The quartz content was made up of about 96% of the total mineralogical components; the sediments of the Afowo Formation can be described to be mineralogically and texturally stable. The result of the scanning electron microscopy (SEM analysis revealed that the oil sands contained minerals which had been precipitated and occurred as pore filling cement; these minerals include sheet kaolinite, block kaolinite, vermiform kaolinite, pyrite crystals and quartz. The SEM images also showed micro-pores ranging from 0.057µm to 0.446µm and fractures. The study showed that the clay minerals contained in the Afowo reservoir rocks were mainly kaolinite. Kaoline unlike some other clays (e.g Montimorillonite does not swell with water, hence it is not expected to have any negative effects on the reservoir quality, especially during enhanced oil recovery operations.

  9. Outcrop - core correlation and seismic modeling of the Athabasca Oil Sands Deposit, Fort McMurray area, northeast Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Hein, F.J. [Alberta Geological Survey, Calgary, AB (Canada); Langenberg, C.W.; Cotterill, D.C.; Berhane, H. [Alberta Geological Survey, Edmonton, AB (Canada); Lawton, D.; Cunningham, J. [Calgary Univ., AB (Canada)

    1999-11-01

    A joint study between the Alberta Geological Survey and the University of Calgary was conducted which involved a detailed facies analysis of cores and outcrops from the Athabasca Oil Sands Deposit in Alberta`s Steepbank area. A unified facies classification for the deposit was developed. Larger scale facies associations were also determined, as well as proxy sonic logs for outcrops used in seismic modeling. The cores which were displayed exhibited detailed sedimentological and stratigraphic analysis of 10 outcrops in the area. 7 refs.

  10. Huge music archives on mobile devices

    DEFF Research Database (Denmark)

    Blume, H.; Bischl, B.; Botteck, M.

    2011-01-01

    The availability of huge nonvolatile storage capacities such as flash memory allows large music archives to be maintained even in mobile devices. With the increase in size, manual organization of these archives and manual search for specific music becomes very inconvenient. Automated dynamic...... organization enables an attractive new class of applications for managing ever-increasing music databases. For these types of applications, extraction of music features as well as subsequent feature processing and music classification have to be performed. However, these are computationally intensive tasks...... and difficult to tackle on mobile platforms. Against this background, we provided an overview of algorithms for music classification as well as their computation times and other hardware-related aspects, such as power consumption on various hardware architectures. For mobile platforms such as smartphones...

  11. Huge Tongue Lipoma: A Case Report

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Damghani

    2015-03-01

    Full Text Available Introduction: Lipomas are among the most common tumors of the human body. However, they are uncommon in the oral cavity and are observed as slow growing, painless, and asymptomatic yellowish submucosal masses. Surgical excision is the treatment of choice and recurrence is not expected.    Case Report: The case of a 30-year-old woman with a huge lipoma on the tip of her tongue since 3 years, is presented. She had difficulty with speech and mastication because the tongue tumor was filling the oral cavity. Clinical examination revealed a yellowish lesion, measuring 8 cm in maximum diameter, protruding from the lingual surface. The tumor was surgically excised with restoration of normal tongue function and histopathological examination of the tumor confirmed that it was a lipoma.   Conclusion:  Tongue lipoma is rarely seen and can be a cause of macroglossia. Surgical excision for lipoma is indicated for symptomatic relief and exclusion of associated malignancy.

  12. Nanocellulose, a tiny fiber with huge applications.

    Science.gov (United States)

    Abitbol, Tiffany; Rivkin, Amit; Cao, Yifeng; Nevo, Yuval; Abraham, Eldho; Ben-Shalom, Tal; Lapidot, Shaul; Shoseyov, Oded

    2016-06-01

    Nanocellulose is of increasing interest for a range of applications relevant to the fields of material science and biomedical engineering due to its renewable nature, anisotropic shape, excellent mechanical properties, good biocompatibility, tailorable surface chemistry, and interesting optical properties. We discuss the main areas of nanocellulose research: photonics, films and foams, surface modifications, nanocomposites, and medical devices. These tiny nanocellulose fibers have huge potential in many applications, from flexible optoelectronics to scaffolds for tissue regeneration. We hope to impart the readers with some of the excitement that currently surrounds nanocellulose research, which arises from the green nature of the particles, their fascinating physical and chemical properties, and the diversity of applications that can be impacted by this material. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Stratigraphic model deposit Ofi Inf SDZ-2X A1, Jun in block in Orinoco Oil belt

    International Nuclear Information System (INIS)

    Martinez, E.; Sandoval, D.

    2010-01-01

    This work is about the Stratigraphic model deposit O fi I nf SDZ-2X A1, Junin block in Orinoco Oil belt.This model was based on a chrono stratigraphic interpretation and was defined the correlation between the main and secondary surfaces. The wells of the study area pass through the Cambrian, Cretaceous and Miocene sediments. The last is more interesting for the study because of the stratigraphic and sand body surface presence

  14. Understanding the spatial formation and accumulation of fats, oils and grease deposits in the sewer collection system.

    Science.gov (United States)

    Dominic, Christopher Cyril Sandeep; Szakasits, Megan; Dean, Lisa O; Ducoste, Joel J

    2013-01-01

    Sanitary sewer overflows are caused by the accumulation of insoluble calcium salts of fatty acids, which are formed by the reaction between fats, oils and grease (FOG) and calcium found in wastewaters. Different sewer structural configurations (i.e., manholes, pipes, wet wells), which vary spatially, along with other obstructions (roots intrusion) and pipe deformations (pipe sags), may influence the detrimental buildup of FOG deposits. The purpose of this study was to quantify the spatial variation in FOG deposit formation and accumulation in a pilot-scale sewer collection system. The pilot system contained straight pipes, manholes, roots intrusion, and a pipe sag. Calcium and oil were injected into the system and operated at alkaline (pH = 10) and neutral (pH = 7) pH conditions. Results showed that solid accumulations were slightly higher at neutral pH. Fourier transform infrared (FTIR) analysis on the solids samples confirmed that the solids were indeed calcium-based fatty acid salts. However, the fatty acid profiles of the solids deviated from the profile found from FOG deposits in sewer systems, which were primarily saturated fatty acids. These results confirm the work done previously by researchers and suggest an alternative fate of unsaturated fatty acids that does not lead to their incorporation in FOG deposits in full-scale sewer systems.

  15. Nitrogen and sulphur deposition and the growth of Sphagnum fuscum in bogs of the Athabasca Oil Sands Region, Alberta

    Directory of Open Access Journals (Sweden)

    Melanie A. VILE

    2010-08-01

    Full Text Available One of the consequences of ongoing development of the oil sands reserve in the Athabasca Oil Sands Region (AOSR near Fort McMurray, Alberta, Canada (56° 39' N, 111° 13' W is an increase in emissions of nitrogen (N and sulphur (S, with an attendant increases in regional atmospheric N and S deposition. Regional land cover across northeastern Alberta is a mixture of Boreal Mixedwood, Boreal Highlands, and Subarctic areas. Peatlands occupy between 22 and 66% of these natural regions, and the land cover of bogs varies between 6.7% in the Mixedwood Region to 46% in the Subarctic Region. Ombrotrophic bog ecosystems may be especially sensitive to atmospheric deposition of N and S. Across 10 ombrotrophic bog sites in the AOSR over four years (2005– 2008, we found no evidence of elevated deposition of NH4 +-N, NO3 –-N, total inorganic nitrogen (TIN; NH4 +-N plus NO3 –-N, or SO4 2–-S, with values measured using ion exchange resin collectors averaging 0.61 ± 04, 0.20 ± 0.01, 0.81 ± 0.04, and 1.14 ± 0.06 kg ha–1 y–1, respectively. Vertical growth and net primary production of Sphagnum fuscum, an indicator of elevated deposition, did not differ consistently across sites, averaging 11.8 ± 0.2 mm y–1 and 234 ± 3.3 g m–2 y–1, respectively, over the four years. Neither vertical growth nor net primary production of S. fuscum was correlated with growing season atmospheric N or S deposition. Our data provide a valuable benchmark of background values for monitoring purposes in anticipation of increasing N and S deposition over a broader geographic region within the AOSR.

  16. Huge hydrocephalus: definition, management, and complications.

    Science.gov (United States)

    Faghih Jouibari, Morteza; Baradaran, Nazanin; Shams Amiri, Rouzbeh; Nejat, Farideh; El Khashab, Mostafa

    2011-01-01

    Lack of comprehensive knowledge and numerous socioeconomic problems may make the parents leave hydrocephalic children untreated, leading to progressive hydrocephalus and eventual unordinary big head. Management of huge hydrocephalus (HH) differs from common hydrocephalus. We present our experience in the management of these children. HH is defined as head circumference larger than the height of the infant. Nine infants with HH have been shunted in Children's Hospital Medical Center and followed up for 0.5 to 7 years. The most common cause of hydrocephalus was aqueductal stenosis. The mean age of patients during shunting was 3 months. The head circumference ranged from 56 to 94 cm with the average of 67 cm. Cognitive statuses were appropriate based on their age in five patients. Motor development was normal only in one patient. Complications were found in most cases which included subdural effusion (six patients), shunt infection (four patients), skin injury (three patients), proximal catheter coming out of ventricle to the subdural space (two patients), and shunt exposure (one patient). Three patients died due to shunt infection and sepsis. Numerous complications may occur in patients with HH after shunt operation such as subdural effusion, ventricular collapse, electrolyte disturbance, skull deformity, scalp injury, and shunt infection. Mental and motor disabilities are very common in patients with HH. Many of these complications can be related to overdrainage; therefore, drainage control using programmable shunts is advisable.

  17. Differential effects of high atmospheric N and S deposition on bog plant/lichen tissue and porewater chemistry across the Athabasca Oil Sands Region

    Science.gov (United States)

    R. Kelman Wieder; Melanie A. Vile; Kimberli D. Scott; Cara M. Albright; Kelly J. McMillen; Dale H. Vitt; Mark E. Fenn

    2016-01-01

    Oil extraction and development activities in the Athabasca Oil Sands Region of northern Alberta, Canada, release NOx, SOx, and NHy to the atmosphere, ultimately resulting in increasing N and S inputs to surrounding ecosystems through atmospheric deposition. Peatlands are a major feature of the northern Alberta landscape, with bogs covering 6-10% of the land area, and...

  18. Process control upgrades yield huge operational improvements

    International Nuclear Information System (INIS)

    Fitzgerald, W.V.

    2001-01-01

    Most nuclear plants in North America were designed and built in the late 60 and 70. The regulatory nature of this industry over the years has made design changes at the plant level difficult, if not impossible, to implement. As a result, many plants in this world region have been getting by on technology that is over 40 years behind the times. What this translates into is that the plants have not been able to take advantage of the huge technology gains that have been made in process control during this period. As a result, most of these plants are much less efficient and productive than they could be. One particular area of the plant that is receiving a lot of attention is the feedwater heaters. These systems were put in place to improve efficiency, but most are not operating correctly. This paper will present a case study where one progressive mid-western utility decided that enough was enough and implemented a process control audit of their heater systems. The audit clearly pointed out the existing problems with the current process control system. It resulted in a proposal for the implementation of a state of the art, digital distributed process control system for the heaters along with a complete upgrade of the level controls and field devices that will stabilize heater levels, resulting in significant efficiency gains and lower maintenance bills. Overall the payback period for this investment should be less than 6 months and the plant is now looking for more opportunities that can provide even bigger gains. (author)

  19. Formation of fouling deposits on a carbon steel surface from Colombian heavy crude oil under preheating conditions

    Science.gov (United States)

    Muñoz Pinto, D. A.; Cuervo Camargo, S. M.; Orozco Parra, M.; Laverde, D.; García Vergara, S.; Blanco Pinzon, C.

    2016-02-01

    Fouling in heat exchangers is produced by the deposition of undesired materials on metal surfaces. As fouling progresses, pressure drop and heat transfer resistance is observed and therefore the overall thermal efficiency of the equipment diminishes. Fouling is mainly caused by the deposition of suspended particles, such as those from chemical reactions, crystallization of certain salts, and some corrosion processes. In order to understand the formation of fouling deposits from Colombian heavy oil (API≈12.3) on carbon steel SA 516 Gr 70, a batch stirred tank reactor was used. The reactor was operated at a constant pressure of 340psi while varying the temperature and reaction times. To evaluate the formation of deposits on the metal surfaces, the steel samples were characterized by gravimetric analysis and Scanning Electron Microscopy (SEM). On the exposed surfaces, the results revealed an increase in the total mass derived from the deposition of salt compounds, iron oxides and alkaline metals. In general, fouling was modulated by both the temperature and the reaction time, but under the experimental conditions, the temperature seems to be the predominant variable that controls and accelerates fouling.

  20. Forecasting of reservoir pressures of oil and gas bearing complexes in northern part of West Siberia for safety oil and gas deposits exploration and development

    Science.gov (United States)

    Gorbunov, P. A.; Vorobyov, S. V.

    2017-10-01

    In the paper the features of reservoir pressures changes in the northern part of West Siberian oil-and gas province are described. This research is based on the results of hydrodynamic studies in prospecting and explorating wells in Yamal-Nenets Autonomous District. In the Cenomanian, Albian, Aptian and in the top of Neocomian deposits, according to the research, reservoir pressure is usually equal to hydrostatic pressure. At the bottom of the Neocomian and Jurassic deposits zones with abnormally high reservoir pressures (AHRP) are distinguished within Gydan and Yamal Peninsula and in the Nadym-Pur-Taz interfluve. Authors performed the unique zoning of the territory of the Yamal-Nenets Autonomous District according to the patterns of changes of reservoir pressures in the section of the sedimentary cover. The performed zoning and structural modeling allow authors to create a set of the initial reservoir pressures maps for the main oil and gas bearing complexes of the northern part of West Siberia. The results of the survey should improve the efficiency of exploration drilling by preventing complications and accidents during this operation in zones with abnormally high reservoir pressures. In addition, the results of the study can be used to estimate gas resources within prospective areas of Yamal-Nenets Autonomous District.

  1. Spatial and temporal patterns in trace element deposition to lakes in the Athabasca oil sands region (Alberta, Canada)

    Science.gov (United States)

    Cooke, Colin A.; Kirk, Jane L.; Muir, Derek C. G.; Wiklund, Johan A.; Wang, Xiaowa; Gleason, Amber; Evans, Marlene S.

    2017-12-01

    The mining and processing of the Athabasca oil sands (Alberta, Canada) has been occurring for decades; however, a lack of consistent regional monitoring has obscured the long-term environmental impact. Here, we present sediment core results to reconstruct spatial and temporal patterns in trace element deposition to lakes in the Athabasca oil sands region. Early mining operations (during the 1970s and 1980s) led to elevated V and Pb inputs to lakes located quality guidelines, and no spatial or temporal trends were observed in the frequency of guideline exceedence. Our results demonstrate that early mining efforts had an even greater impact on trace element cycling than has been appreciated previously, placing recent monitoring efforts in a critical long-term context.

  2. Experience in oil field processing of gas and condensate at the Shatlyk deposits

    Energy Technology Data Exchange (ETDEWEB)

    Dalmatov, V.V.; Chernikov, Ye.I.; Govorun, V.P.; Turevskiy, Ye.N.

    1983-01-01

    The operation of installations for preparing gas are analyzed, along with the operation of individual technological devices at the Shatlyk deposit, the basic things which hinder the support of the designed low temperature conditions are shown and recommendations for standardizing the operation of the technological installations are given. Experience in the operation of the gas preparation installations at the Shatlyk deposit is recommended for use in deposits being introduced into development.

  3. Reservoir characteristics of middle pliocene deposits and their role in the formation of oil gas deposits of Azerbaijan shelf of the south Caspian

    International Nuclear Information System (INIS)

    Veliyeva, V.A.; Kabulova, A. Ya.

    2002-01-01

    Full text :Lithology-stratigraphical peculiarities of deposits of lower stage of productive series (P S) of Middle Pliocene their reservoir properties, correlation of individual horizons within the uplifts of the south Caspian was studied. Analysis of arenosity of lower stage of PS was studied. Azerbaijan shelf of South Caspian is located within depression zone of sedimentation basin generally, of Pliocene and post-Pliocene period of time, when sedimentation was mostly intensive and occurred in conditions of more deep sea basin. Azerbaijan shelf of south Caspian covers mainly two oil-gasp-bearing region as Absheron archipelago (north, north-eastern part of region) and Baku archipelago (southern part). Analysis of arenosity along the areas of the studied region showed, that in south-eastern direction and on the south eastern subsidence of each fold, as well as on the north-eastern wing their sand percent considerably increase whereas reservoir properties of sandy interbeds are improved

  4. Microbiological method for exploitation of oil deposits with a high mineralization of interstitial waters

    Energy Technology Data Exchange (ETDEWEB)

    Senyukov, V M; Yulbarisov, E M; Taldykina, N N; Shishenina, E P

    1970-07-01

    A literature review is made of microbiological processes suitable for secondary oil recovery. On the basis of literature data, basic experiments were conducted in the Arlansk field. This field has viscous oil, highly mineralized connate water (rho = 1.18) and permeability above 1,000 md. A mixture of aerobic and anaerobic bacteria with nutrient was injected through one well, then 650 cu m of fresh water was injected. Mineralogical and bacteriological analyses were made of produced fluids in nearby wells. Both aerobic and anaerobic bacteria were found in produced fluids, 600 m from the injection wells. On the basis of this result, it was concluded that microbiological processes can be used to increase secondary recovery of oil. However, no oil recovery data are presented. (10 refs.)

  5. Deposition of tocopherol and tocotrienol in the tissues of red hybrid tilapia, Oreochromis sp., fed vitamin E-free diets supplemented with different plant oils.

    Science.gov (United States)

    Lee, Kuan-Shern; Yuen, Kah-Hay; Ng, Wing-Keong

    2013-12-01

    Vitamin E, a potent antioxidant consisting of four isomers each (α, β, γ, δ) of tocopherol (T) and tocotrienol (T3), is found naturally in plant oils at different concentrations. In this study, four semi-purified isonitrogenous and isolipidic (10 %) diets containing canola oil, cold-pressed soybean oil, wheat germ oil, or palm fatty acid distillates (PFAD) as the sole vitamin E source were fed to triplicate groups of red hybrid tilapia (Oreochromis sp.) fingerlings (14.82 ± 0.05 g) for 45 days. Vitamin E concentrations and composition were measured in the muscle, liver, skin, and adipose tissue. Deposition of α-T (53.4-93.1 % of total vitamin E) predominated over deposition of other isomers, except in the liver of fish fed the SBO diet, where α-T and γ-T deposition was in the ratio 40:60. T3 deposition (2.6-29.4 %) was only detected in tissues of fish fed the PFAD diet; adipose tissue was the major storage depot. Fish fed the SBO diet contained significantly more (P vitamin E isomers present in plant oils. The type and concentration of endogenous vitamin E and the fatty acid composition of plant oils can affect the oxidative stability of tilapia tissues.

  6. Observations on sediment sources in the Lower Athabasca River basin: implications of natural hydrocarbons inputs from oil sands deposits

    International Nuclear Information System (INIS)

    Conly, F.M.

    1999-01-01

    Government, industry and public concern exists over the environmental consequences of the development of the oil sand deposits in the McMurray Formation in the lower Athabasca River basin, Alberta. The impact of this development is unclear and is undergoing investigation. Investigations to date have focussed on the nature of the effluent produced by the extraction industry and its effect on biotic systems, and on the spatial distribution of hydrocarbon contaminants associated with deposited fluvial sediments. Natural hydrocarbon outcrops may be responsible for observed biomarker responses in areas not exposed to industrial effluent. Given this source of hydrocarbons and doubt concerning its environmental impact, it is difficult to ascertain the impact of oil extraction activities within a fluvial system. A study was conducted to determine the nature and extent of natural hydrocarbon releases within the context of the sediment regime of the lower Athabasca River basin. A description is included of observations from the field and a context is set up for assessing sediment-bound hydrocarbon contaminants in the lower Athabasca River basin. Abstract only included

  7. Alberta's new oil boom

    International Nuclear Information System (INIS)

    Nikiforuk, A.

    1997-01-01

    A massive expansion of Canada's oil sands and the oil-mining business is underway. The prediction is that within five years there will be at least three, possibly six, huge new open pit mines north of Fort McMurray, Alberta. It was suggested that within 20 years, possibly half of Canada's oil supply will come from the oil sands industry which has already attracted $10 billion worth of developments. Unlike conventional crude, the oil sands contain bitumen, water, clay, minerals and lots of sands. Shallow deposits are mined like coal. Deeper formations make use of in-situ thermal recovery techniques. Extraction costs are presently at $15 per barrel, aiming for $12 by 1999. Return on investment is in double digits. Estimates of reserves in the Athabasca, Cold Lake, Peace River and Wabasca deposits go as high as 1.7 trillion barrels, or about twice as much as Saudi Arabia's conventional crude reserves. Syncrude has built a $5 billion production facility and two pipelines have already been proposed to transport the oil sands crude to midwestern US refineries. US refineries prize synthetic crude as excellent mixing stock. The major problem with oil sands is that unlike conventional oil, these reserves require an enormous amount of energy to exploit, which in turn means lots of foul air and greenhouse gases. There are many environmental unknowns, and without a clear management framework in sight the addition of two or three Syncrude-size operations has the potential to create a real and significant acid rain problem in the Western Canada Basin

  8. Characteristics of depositional environment and evolution of Upper Cretaceous Mishrif Formation, Halfaya Oil field, Iraq based on sedimentary microfacies analysis

    Science.gov (United States)

    Zhong, Yuan; Zhou, Lu; Tan, Xiucheng; Guo, Rui; Zhao, Limin; Li, Fei; Jin, Zhimin; Chen, Yantao

    2018-04-01

    As one of the most important carbonate targets in the Middle East, Upper Cretaceous Mishrif Formation has been highlighted for a long time. Although consensus has been reached on the overall sedimentary background, disputes still exist in understanding the sedimentary environment changes among sub-regions due to relatively limited research, rare outcrop, and incomplete drilled core, which hinders the analysis on sedimentary environment and thus the horizontal and vertical correlation. In this study, taking the Halfaya Oil Field as an example, the sedimentary microfacies analysis method was introduced to comprehensively characterize the cored interval of Mishrif Formation, including Single Layers MC1-1 to MA2. A total of 11 sedimentary microfacies are identified through system identification of sedimentary microfacies and environmental analysis, with reference to the standard microfacies classification in the rimmed carbonate platform. Then three kinds of environments are identified through microfacies assemblage analysis, namely restricted platform, open platform, and platform margin. Systematic analyses indicate that the deposits are mainly developed in the open platform and platform margin. Meanwhile, rock-electricity interpretation model is established according to the electricity response to cored intervals, and is then employed to interpret the uncored intervals, which finally helps build the sedimentary evolution pattern through horizontal and vertical correlation. It is proposed that the Single Layers MC1-1 to MB2-3 were deposited in the open platform featured by low water level, including sub-environments of low-energy shoal within platform and inter-shoal sea; Single Layers MB2-2 to MB1-2B were deposited in the open platform and platform margin, including sub-environments of high-energy shoal on the platform margin, low-energy shoal within platform, inter-shoal sea, and open sea; and Single Layers MB1-2A to MA2 were again deposited in the open platform

  9. Investigation of produced waters radioactivity of oil and gas deposits in the Dnieper-Donets province

    Directory of Open Access Journals (Sweden)

    Plyatsuk L. D.

    2017-12-01

    Full Text Available The process of radioactive pollution of produced waters, oilfield equipment, oil-contaminated soils and sludge is widely spread and differs within the various oil and gas regions. Formation waters contained radioactive element isotopes become the significant source and cause of elevated level of equivalent dose power and as a consequence, an increase in the incidence among the population. The author's idea is formulation of specific recommendations on the decontamination of the investigated objects by conducting the necessary appropriate experimental studies. The purpose of the article is to determine the content of radionuclides, γ- and α-emitters in technogenic objects of Bugruvate oil and gas fields, and to reveal the relationship with the features of mineralogical composition, geological structure and technological process. The γ-spectrometric analysis was used to determine the radionuclide composition of the natural radiators of the 238U (226Ra, 214Pо, 214Bi and 232Th (228Ac, 212Pb, 212Вi series in samples of technological sludge, oil, individual soil samples and water. The content of radionuclides of α-emitters was determined using separate radiochemical techniques. It was investigated that the radioactivity of the formation water is mainly determined by 226Ra and 228Ra and the products of their decay.

  10. Identifying the Prospective Area of Sulfide Groundwater within the Area of Palvantash Oil and Gas Deposit

    Directory of Open Access Journals (Sweden)

    M. R. Zhurayev

    2014-03-01

    Full Text Available This paper describes the methodology of prospecting for sulfide groundwater in the area of Palvantash oil fields. In result of study allowed determining the favorable conditions for the sulfide waters formation, and mapping the areas of different sulfide water concentration. The relatively permeable areas were established and the water borehole positions were recommended.

  11. The effect of pomegranate seed oil and grapeseed oil on cis-9, trans-11 CLA (rumenic acid), n-3 and n-6 fatty acids deposition in selected tissues of chickens.

    Science.gov (United States)

    Białek, A; Białek, M; Lepionka, T; Kaszperuk, K; Banaszkiewicz, T; Tokarz, A

    2018-04-23

    The aim of this study was to determine whether diet modification with different doses of grapeseed oil or pomegranate seed oil will improve the nutritive value of poultry meat in terms of n-3 and n-6 fatty acids, as well as rumenic acid (cis-9, trans-11 conjugated linoleic acid) content in tissues diversified in lipid composition and roles in lipid metabolism. To evaluate the influence of applied diet modification comprehensively, two chemometric methods were used. Results of cluster analysis demonstrated that pomegranate seed oil modifies fatty acids profile in the most potent way, mainly by an increase in rumenic acid content. Principal component analysis showed that regardless of type of tissue first principal component is strongly associated with type of deposited fatty acid, while second principal component enables identification of place of deposition-type of tissue. Pomegranate seed oil seems to be a valuable feed additive in chickens' feeding. © 2018 Blackwell Verlag GmbH.

  12. Spray dried microparticles of chia oil using emulsion stabilized by whey protein concentrate and pectin by electrostatic deposition.

    Science.gov (United States)

    Noello, C; Carvalho, A G S; Silva, V M; Hubinger, M D

    2016-11-01

    Chia seed oil has a high content of α-linolenic acid (60%) and linoleic acid (20%). Use of this oil in different products is limited due to its liquid state, and the presence of insaturation is a trigger for oxidation. In this context, to facilitate the incorporation of chia oil in food products and increase its protection against oxidation, the aim of this work was to produce chia oil microparticles by spray drying using emulsions stabilized by whey protein concentrate (ζ-potential +13.4 at pH3.8) and pectin (ζ-potential -40.4 at pH3.8) through the electrostatic layer-by-layer deposition technique and emulsions prepared with only whey protein concentrate. Emulsions stabilized by whey protein concentrate and stabilized by whey protein concentrate-pectin were prepared using maltodextrin (10 DE) and modified starch (Hi-Cap® 100). They were characterized in relation to stability, droplet size, ζ-Potential and optical microscopy. The microparticles were characterized in relation to moisture content, water activity, particle size, microstructure and oxidative stability by the Rancimat method. Emulsions stabilized by whey protein concentrate-pectin with added maltodextrin 10 DE and emulsions stabilized by whey protein concentrate with added modified starch (Hi-Cap® 100) were stable after 24h. Emulsions stabilized by whey protein concentrate and by whey protein concentrate-pectin showed droplets with mean diameter ranging from 0.80 to 1.31μm, respectively and ζ-potential varying from -6.9 to -27.43mV, respectively. After spray drying, the microparticles showed an mean diameter ranging from 7.00 to 9.00μm. All samples presented high encapsulation efficiency values, above 99%. Microparticles produced with modified starch showed a smoother spherical surface than particles with maltodextrin 10 DE, which presented a wrinkled surface. All microparticles exhibited higher oxidative stability than chia oil in pure form. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Huge maternal hydronephrosis: a rare complication in pregnancy.

    Science.gov (United States)

    Peng, Hsiu-Huei; Wang, Chin-Jung; Yen, Chih-Feng; Chou, Chien-Chung; Lee, Chyi-Long

    2003-06-10

    A huge maternal hydronephrosis is uncommon in pregnancy and might be mistaken as a pelvic mass. A 21-year-old primigravida was noted at 25th week of gestation to have a visible bulging mass on her left flank. The mass was originally mistaken as a large ovarian cyst but later proved to be a huge hydronephrosis. Retrograde insertion of ureteroscope and a ureteric stent failed, so we performed repeated ultrasound-guided needle aspiration to decompress the huge hydronephrosis, which enabled the patient to proceed to a successful term vaginal delivery. Nephrectomy was performed after delivery and proved the diagnosis of congenital ureteropelvic junction obstruction.

  14. Process for selectivity lowering the water permeability of a crude oil deposit

    Energy Technology Data Exchange (ETDEWEB)

    Katser, M F

    1966-10-20

    In this process for selectively reducing the water permeability of oil-bearing formations, especially during waterflooding, an aqueous solution is injected into the producing well. This solution contains a hydrolyzed acryl amide polymer, polyacrylamide or a copolymer, the greater part of which is acrylamide and the smaller part a polymerizable monomer, e.g., vinyl alcohol, vinyl chloride, acrylonitrile, methacrylonitrile or vinyl acryl ether. About 0.5-67.0% of the carboxy amide groups of the acrylamide polymer are hydrolyzed to carboxilic groups. The concentration of the hydrolyzed acrylamide polymer in the solution is about 0.01-1.0%. (3 claims)

  15. Determination of danger categories of chisel waste, which are made by investigation and operation of oil-and-gas deposits in the Caspian Sea basin by calculation method

    Directory of Open Access Journals (Sweden)

    A. A. Gadzhiyev

    2007-01-01

    Full Text Available In this article there is undertaken the attempt to define danger categories of the chisel solutions formed at investigation and operation of oil-and-gas deposits in Caspian sea basin by making calculations. Definition of a danger category was made in view of their initial structure and at various stages of drilling.

  16. Aggressive angiomyxoma presenting with huge abdominal lump: A case report

    Science.gov (United States)

    Kumar, Sanjeev; Agrawal, Nikhil; Khanna, Rahul; Khanna, AK

    2008-01-01

    Agressive angiomyxoma is a rare mesenchymal neoplasm. It mainly presents in females. We here present a case of angiomyxoma presenting as huge abdominal lump along with gluteal swelling. Case note is described along with brief review of literature. PMID:18755035

  17. Utilizing laser spectroscopy of noble gas tracers for mapping oil and gas deposits. Final technical report

    International Nuclear Information System (INIS)

    Schuessler, H.A.

    1998-01-01

    The research results have demonstrated that extending collinear fast beam laser spectroscopy to resonance-excitation field-ionization spectroscopy yielded a novel ultrasensitive method to identify minute amounts of radioactive and stable isotopes. The authors have mainly performed measurements involving the trace detection of the various isotopes of Kr, Tl and Xe. In particular the technique is capable to monitor the long-lived radioactive isotopes used as tracers in the well logging industry and also in the biosphere in a range, where nuclear radiation counting techniques do not have the required isotopic selectivity and sensitivity. The authors are working in two directions. Both applications are based on the ultra sensitive detection of 85 Kr, namely: trace detection of 85 Kr to map the reservoir structure of large oil fields; trace detection of 85 Kr in environmental air samples to monitor nuclear activities and nuclear materials processing on a global scale. The authors are in contact with the BP company for practically implementing the oil field related work and have asked for samples from their Alaskan fields

  18. Using combinations of methods for evaluating capacity of fissured reservoirs of the upper Cretaceous Malgobek- Voznesensk oil deposit in Ch. I. ASSR

    Energy Technology Data Exchange (ETDEWEB)

    Vasilev, V.M.

    1968-01-01

    Ch.I.ASSR stands for the Chechen-Ingush Autonomous Soviet Socialist Republic (North Caucasus). The deposit is associated with practically impervious limestones (less than 1 md) with intergranular porosity; oil is found along fractures of various length and degree of openness. Amount of fluids contained in this type of reservoirs was evaluated by the following methods: (1) core analyses; (2) geophysical surveying of wells; (3) hydrodynamic techniques of well investigations; and (4) according to parts of the deposits where oil was already recovered. Statistical interpretation of combined data indicated that reservoir properties gradually become poorer with increasing depth and in the direction from the crest of the fold towards its flanks and periclinal ends. Application of some formulas used in this work is explained. It is concluded that by using combinations of methods it is possible to evaluate the absolute and effective values of secondary reservoir capacity and to establish approximately geological and retrievable oil reserves.

  19. Huge magnetoresistance effect of highly oriented pyrolytic graphite

    International Nuclear Information System (INIS)

    Du Youwei; Wang Zhiming; Ni Gang; Xing Dingyu; Xu Qingyu

    2004-01-01

    Graphite is a quasi-two-dimensional semimetal. However, for usual graphite the magnetoresistance is not so high due to its small crystal size and no preferred orientation. Huge positive magnetoresistance up to 85300% at 4.2 K and 4950% at 300 K under 8.15 T magnetic field was found in highly oriented pyrolytic graphite. The mechanism of huge positive magnetoresistance is not only due to ordinary magnetoresistance but also due to magnetic-field-driven semimetal-insulator transition

  20. Study of factors governing oil-water separation process using TiO₂ films prepared by spray deposition of nanoparticle dispersions.

    Science.gov (United States)

    Gondal, Mohammed A; Sadullah, Muhammad S; Dastageer, Mohamed A; McKinley, Gareth H; Panchanathan, Divya; Varanasi, Kripa K

    2014-08-27

    Surfaces which possess extraordinary water attraction or repellency depend on surface energy, surface chemistry, and nano- and microscale surface roughness. Synergistic superhydrophilic-underwater superoleophobic surfaces were fabricated by spray deposition of nanostructured TiO2 on stainless steel mesh substrates. The coated meshes were then used to study gravity driven oil-water separation, where only the water from the oil-water mixture is allowed to permeate through the mesh. Oil-water separation efficiencies of up to 99% could be achieved through the coated mesh of pore sizes 50 and 100 μm, compared to no separation at all, that was observed in the case of uncoated meshes of the same material and pore sizes. An adsorbed water on the TiO2 coated surface, formation of a water-film between the wires that form the mesh and the underwater superoleophobicity of the structured surface are the key factors that contribute to the enhanced efficiency observed in oil-water separation. The nature of the oil-water separation process using this coated mesh (in which the mesh allows water to pass through the porous structure but resists wetting by the oil phase) minimizes the fouling of mesh so that the need for frequent replacement of the separating medium is reduced. The fabrication approach presented here can be applied for coating large surface areas and to develop a large-scale oil-water separation facility for oil-field applications and petroleum industries.

  1. Precipitation of Calcite during the Deposition of Paleogene Sangkarewang Oil Shale, Ombilin Basin, West Sumatra, Indonesia

    Directory of Open Access Journals (Sweden)

    Agus Haris Widayat

    2015-09-01

    Full Text Available DOI: 10.17014/ijog.2.3.185-197Geochemical and petrographical analyses were carried out to investigate the occurrence of calcite in theformer Ombilin lacustrine lake. The study involves eight samples taken from a 56 m long drill core of Sangkarewangoil shale. Geochemical investigation showed that the samples consist of varied terrigenous input represented by Si, Al, K, and Ti, and autochthonous input represented by S, total organic carbon (TOC, and d13C of bulk organic matter. Along the drill core profile the abundance of autochthonous input decreases upwards, while that of terrigenous input oppositely increases upwards. Petrographical analysis revealed that calcite is a major mineral in the samples. In this study, the abundance of calcite could be represented by the abundance of Ca, as calcite is the only significant Ca containing mineral. Ca is abundant in the samples (8.4% in average and its concentration varies similarly with those of S, TOC, and d13C, suggesting that the element as well as calcite incorporates the autochthonous input. Thevariation of calcite abundance in the drill core profile is considered to be related with primary productivity changes during the development of the former lake. Higher primary productivity represented by more positive of d13C value(-24.8‰ during the deposition of the lower part of the drill core profile promoted the higher amount of deposited organic matter. In such environment, the supersaturation of carbonate ion in lake water was also reached and significant precipitation of authigenic calcite occurred. As the lake developed, the primary productivity decreased as indicated by more negative of d13C value (eventually -26.8‰. This condition led to the decreases of deposited organic matterand calcite in the lake sediments.

  2. The performance of electroless nickel deposits in oil-field environments

    International Nuclear Information System (INIS)

    Mack, R.; Bayes, M.

    1984-01-01

    An experimental study was conducted on an electroless nickel plated (represented by Enplate NI-422) C-90 steel, uncoated C-90 steel, AISI 420, 174 PH, SAF 2205, and HASTELLOY /sup R/ G-3 to determine their corrosion-performance in twelve simulated downhole oil or gas production environments during 28 day exposures. These environments were aqueous brines containing various concentrations of Cl - , H 2 S and/or CO 2 , and over a range of temperatures. The results from this study and oilfield data for electroless nickel plated low alloy steels are presented and discussed. The study demonstrates the feasibility of electroless nickel coated low alloy steels as an economical substitute for some highly alloyed materials in certain oilfield applications; the field data support this

  3. Huge natural gas reserves central to capacity work, construction plans in Iran

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    Questions about oil production capacity in Iran tend to mask the country's huge potential as a producer of natural gas. Iran is second only to Russia in gas reserves, which National Iranian Gas Co. estimates at 20.7 trillion cu m. Among hurdles to Iran's making greater use of its rich endowment of natural gas are where and how to sell gas not used inside the country. The marketing logistics problem is common to other Middle East holders of gas reserves and a reason behind the recent proliferation of proposals for pipeline and liquefied natural gas schemes targeting Europe and India. But Iran's challenges are greater than most in the region. Political uncertainties and Islamic rules complicate long-term financing of transportation projects and raise questions about security of supply. As a result, Iran has remained mostly in the background of discussions about international trade of Middle Eastern gas. The country's huge gas reserves, strategic location, and existing transport infrastructure nevertheless give it the potential to be a major gas trader if the other issues can be resolved. The paper discusses oil capacity plans, gas development, gas injection for enhanced oil recovery, proposals for exports of gas, and gas pipeline plans

  4. Plant Community and Nitrogen Deposition as Drivers of Alpha and Beta Diversities of Prokaryotes in Reconstructed Oil Sand Soils and Natural Boreal Forest Soils

    Science.gov (United States)

    Prescott, Cindy E.; Renaut, Sébastien; Terrat, Yves; Grayston, Sue J.

    2017-01-01

    ABSTRACT The Athabasca oil sand deposit is one of the largest single oil deposits in the world. Following surface mining, companies are required to restore soil-like profiles that can support the previous land capabilities. The objective of this study was to assess whether the soil prokaryotic alpha diversity (α-diversity) and β-diversity in oil sand soils reconstructed 20 to 30 years previously and planted to one of three vegetation types (coniferous or deciduous trees and grassland) were similar to those found in natural boreal forest soils subject to wildfire disturbance. Prokaryotic α-diversity and β-diversity were assessed using massively parallel sequencing of 16S rRNA genes. The β-diversity, but not the α-diversity, differed between reconstructed and natural soils. Bacteria associated with an oligotrophic lifestyle were more abundant in natural forest soils, whereas bacteria associated with a copiotrophic lifestyle were more abundant in reconstructed soils. Ammonia-oxidizing archaea were most abundant in reconstructed soils planted with grasses. Plant species were the main factor influencing α-diversity in natural and in reconstructed soils. Nitrogen deposition, pH, and plant species were the main factors influencing the β-diversity of the prokaryotic communities in natural and reconstructed soils. The results highlight the importance of nitrogen deposition and aboveground-belowground relationships in shaping soil microbial communities in natural and reconstructed soils. IMPORTANCE Covering over 800 km2, land disturbed by the exploitation of the oil sands in Canada has to be restored. Here, we take advantage of the proximity between these reconstructed ecosystems and the boreal forest surrounding the oil sand mining area to study soil microbial community structure and processes in both natural and nonnatural environments. By identifying key characteristics shaping the structure of soil microbial communities, this study improved our understanding of

  5. Plant Community and Nitrogen Deposition as Drivers of Alpha and Beta Diversities of Prokaryotes in Reconstructed Oil Sand Soils and Natural Boreal Forest Soils.

    Science.gov (United States)

    Masse, Jacynthe; Prescott, Cindy E; Renaut, Sébastien; Terrat, Yves; Grayston, Sue J

    2017-05-01

    The Athabasca oil sand deposit is one of the largest single oil deposits in the world. Following surface mining, companies are required to restore soil-like profiles that can support the previous land capabilities. The objective of this study was to assess whether the soil prokaryotic alpha diversity (α-diversity) and β-diversity in oil sand soils reconstructed 20 to 30 years previously and planted to one of three vegetation types (coniferous or deciduous trees and grassland) were similar to those found in natural boreal forest soils subject to wildfire disturbance. Prokaryotic α-diversity and β-diversity were assessed using massively parallel sequencing of 16S rRNA genes. The β-diversity, but not the α-diversity, differed between reconstructed and natural soils. Bacteria associated with an oligotrophic lifestyle were more abundant in natural forest soils, whereas bacteria associated with a copiotrophic lifestyle were more abundant in reconstructed soils. Ammonia-oxidizing archaea were most abundant in reconstructed soils planted with grasses. Plant species were the main factor influencing α-diversity in natural and in reconstructed soils. Nitrogen deposition, pH, and plant species were the main factors influencing the β-diversity of the prokaryotic communities in natural and reconstructed soils. The results highlight the importance of nitrogen deposition and aboveground-belowground relationships in shaping soil microbial communities in natural and reconstructed soils. IMPORTANCE Covering over 800 km 2 , land disturbed by the exploitation of the oil sands in Canada has to be restored. Here, we take advantage of the proximity between these reconstructed ecosystems and the boreal forest surrounding the oil sand mining area to study soil microbial community structure and processes in both natural and nonnatural environments. By identifying key characteristics shaping the structure of soil microbial communities, this study improved our understanding of how

  6. Energy security of supply and oil shale resources

    International Nuclear Information System (INIS)

    Elkarmi, F.

    1994-01-01

    Jordan must utilize its huge oil shale deposits in order to increase domestic security of energy supply and benefit financially. Utilization processes will require large scale financial expenditures, beyond Jordan's means. Therefore, the BOT scheme seems to be the perfects solution. Since oil shale retorting technology will produce oil which can be traded to generate valuable foreign exchange revenues, it is more advantageous than direct burning technology which produces electricity limited to local consumption regardless of economics. Under the BOT scheme, the incentive, for the foreign sponsor is to return his investment via quantities of oil; for Jordan the aim is to meet local energy demand and acquire the plant infrastructure in the long term. Recent events in the more traditional oil fields of the region make such a project in Jordan more attractive. (author) 3 tabs. 2 figs

  7. Graphene deposited onto aligned zinc oxide nanorods as an efficient coating for headspace solid-phase microextraction of gasoline fractions from oil samples.

    Science.gov (United States)

    Wen, Congying; Li, Mengmeng; Li, Wangbo; Li, Zizhou; Duan, Wei; Li, Yulong; Zhou, Jie; Li, Xiyou; Zeng, Jingbin

    2017-12-29

    The content of gasoline fraction in oil samples is not only an important indicator of oil quality, but also an indispensable fundamental data for oil refining and processing. Before its determination, efficient preconcentration and separation of gasoline fractions from complicated matrices is essential. In this work, a thin layer of graphene (G) was deposited onto oriented ZnO nanorods (ZNRs) as a SPME coating. By this approach, the surface area of G was greatly enhanced by the aligned ZNRs, and the surface polarity of ZNRs was changed from polar to less polar, which were both beneficial for the extraction of gasoline fractions. In addition, the ZNRs were well protected by the mechanically and chemically stable G, making the coating highly durable for use. With headspace SPME (HS-SPME) mode, the G/ZNRs coating can effectively extract gasoline fractions from various oil samples, whose extraction efficiency achieved 1.5-5.4 and 2.1-8.2 times higher than those of a G and commercial 7-μm PDMS coating respectively. Coupled with GC-FID, the developed method is sensitive, simple, cost effective and easily accessible for the analysis of gasoline fractions. Moreover, the method is also feasible for the detection of gasoline markers in simulated oil-polluted water, which provides an option for the monitoring of oil spill accident. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Towards Sustainable Aquafeeds: Complete Substitution of Fish Oil with Marine Microalga Schizochytrium sp. Improves Growth and Fatty Acid Deposition in Juvenile Nile Tilapia (Oreochromis niloticus)

    Science.gov (United States)

    Sarker, Pallab K.; Kapuscinski, Anne R.; Lanois, Alison J.; Livesey, Erin D.; Bernhard, Katie P.; Coley, Mariah L.

    2016-01-01

    We conducted a 84-day nutritional feeding experiment with dried whole cells of DHA-rich marine microalga Schizochytrium sp. (Sc) to determine the optimum level of fish-oil substitution (partial or complete) for maximum growth of Nile tilapia. When we fully replaced fish oil with Schizochytrium (Sc100 diet), we found significantly higher weight gain and protein efficiency ratio (PER), and lower (improved) feed conversion ratio (FCR) and feed intake compared to a control diet containing fish oil (Sc0); and no significant change in SGR and survival rate among all diets. The Sc100 diet had the highest contents of 22:6n3 DHA, led to the highest DHA content in fillets, and consequently led to the highest DHA:EPA ratios in tilapia fillets. Schizochytrium sp. is a high quality candidate for complete substitution of fish oil in juvenile Nile tilapia feeds, providing an innovative means to formulate and optimize the composition of tilapia juvenile feed while simultaneously raising feed efficiency of tilapia aquaculture and to further develop environmentally and socially sustainable aquafeeds. Results show that replacing fish oil with DHA-rich marine Sc improves the deposition of n3 LC PUFA levels in tilapia fillet. These results support further studies to lower Schizochytrium production costs and to combine different marine microalgae to replace fish oil and fishmeal into aquafeeds. PMID:27258552

  9. Huge Mesenteric Lymphangioma – A Rare Cause of Acute Abdomen

    African Journals Online (AJOL)

    Lymphangiomas are benign congenital masses which occur most commonly in head and neck of children and incidence of mesenteric lymphangiomas is very rare. We report such a case of huge mesenteric lymphangioma in a 20 year old male who presented to us with acute abdomen. Pre-operative diagnosis is difficult ...

  10. 61 HUGE BENIGN GRANULOSA CELL TUMOUR IN A 61 YEAR ...

    African Journals Online (AJOL)

    Dr. E. P. Gharoro

    peritoneal cavity, huge right ovarian cyst measuring 37cm/29cm as in figure 1a, weighing 8.3 kg with a thick smooth wall without excrescences on surface. ... is released in the blood during pregnancy and is produced in other conditions such as endometriosis, fibroids and diverticulitis. It is useful in monitoring therapy.

  11. Umbilicoplasty in children with huge umbilical hernia | Komlatsè ...

    African Journals Online (AJOL)

    With a mean follow-up of 10 months, we had 10 excellent results and two fair results according to our criteria. Conclusion: Our two lateral fl aps umbilicoplasty is well-adapted to HUH in children. Itis simple and assures a satisfactory anatomical and cosmetic result. Key words: Children, huge umbilical hernia, Togo, umbilical ...

  12. A Huge Ovarian Dermoid Cyst: Successful Laparoscopic Total Excision

    OpenAIRE

    Uyanikoglu, Hacer; Dusak, Abdurrahim

    2017-01-01

    Giant ovarian cysts, ≥15 cm in diameter, are quite rare in women of reproductive age. Here, we present a case of ovarian cyst with unusual presentation treated by laparoscopic surgery. On histology, mass was found to be mature cystic teratoma. The diagnostic and management challenges posed by this huge ovarian cyst were discussed in the light of the literature.

  13. Huge cystic craniopharyngioma. Changes of cyst density on computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Takamura, Seishi; Fukumura, Akinobu; Ito, Yoshihiro; Itoyama, Yoichi; Matsukado, Yasuhiko

    1986-06-01

    The findings of computed tomography (CT) of a huge cystic craniopharyngioma in a 57-year-old woman are described. Cyst density varied from low to high levels in a short duration. Follow-up CT scans were regarded as important to diagnose craniopharyngioma. The mechanism of increment of cyst density was discussed.

  14. Huge mucinous cystadenoma of the pancreas mistaken for a ...

    African Journals Online (AJOL)

    Cystic tumors of the pancreas are rare and can be confused with pseudocysts.We present a 50 year old woman with a huge mucinous cystadenoma of the pancreas initially diagnosed and managed with a cystojejunostomy and cyst wall biopsy. She required another laparotomy and tumor excision after histological ...

  15. Prospects of oil-gas content of the meso-cenozoic deposits of the middle Kura depression

    International Nuclear Information System (INIS)

    Bairamova, G.A

    2002-01-01

    of the main volcanites (2,3-2,45 g/s m3) can be perfectly observed in section from top bottom from their top at depth of 350 m which is discovered by drilling.The presence of the Late Cretaceous subalkaline vulcanite in top of Muradkhanly block and lack of them in Saatly block show significantly deeper erosion of Saatly block in comparison with Muradkhanly one and also show the longer and intensive development in Saatly volcanites of exogenic jointing:500 m on vertical from top in Saatly block and total 350 m-in Muradkhanly.The same -type structure of top of buried basement of fields (Saatly and Muradkhanly) of the Middle Kura depression allows to make a conclusion of availability of regional reservoir with thickness 350-500 m which is favorable for localization of industrial oil and gas deposits in it.

  16. Oils

    Energy Technology Data Exchange (ETDEWEB)

    Fabbri, S

    1909-11-29

    Mineral, shale, and like oils are treated successively with sulfuric acid, milk of lime, and a mixture of calcium oxide, sodium chloride, and water, and finally a solution of naphthalene in toluene is added. The product is suitable for lighting, and for use as a motor fuel; for the latter purpose, it is mixed with a light spirit.

  17. The effect of prolonged flooding of an oil deposit on the special composition and the activity of hydrocarbon-oxidizing microflora

    Energy Technology Data Exchange (ETDEWEB)

    Berdichevskaya, M V

    1982-07-01

    The special composition of hydrocarbon-oxidizing bacteria was studied in terrigenous and carbonate oil-bearing strata from several deposits of the Permian Cis-Ural region. We isolated 43 strains and assigned them to the following genera: Mycobacterium, Micrococcus, Brevibacterium, Corynebacterium, Flavobacterium, Achromobacter and Pseudomonas. The special composition of the hydrocarbon-oxidizing microflora was shown to depend on the flooding of an oil stratum, as a result of which the ecological environment in a deposit changed. Gram-positive coryneform bacteria were found in stratal salinized waters and in diluted stratal waters. Gram-negative hydrocarbon-oxidizing bacteria were isolated from pumped-in river waters and from stratal waters diluted by 70-100% as the result of flooding. The metabolic activity of Corynebacterium fascians (2 strains), Mycobacterium rubrum (1 strain), Pseudomonas mira (1 strain) and Flavobacterium perigrinum (1 strain) was assayed in stratal waters with different concentrations of salts. The coryneform hydrocarbon-oxidizing bacteria were shown to be very halotolerant as the result of adaptation; that is why the incidence of these microorganisms is very great in highly mineralized stratal water of oil deposits.

  18. An enhanced approach for the use of satellite-derived leaf area index values in dry deposition modeling in the Athabasca oil sands region.

    Science.gov (United States)

    Davies, Mervyn; Cho, Sunny; Spink, David; Pauls, Ron; Desilets, Michael; Shen, Yan; Bajwa, Kanwardeep; Person, Reid

    2016-12-15

    In the Athabasca oil sands region (AOSR) of Northern Alberta, the dry deposition of sulphur and nitrogen compounds represents a major fraction of total (wet plus dry) deposition due to oil sands emissions. The leaf area index (LAI) is a critical parameter that affects the dry deposition of these gaseous and particulate compounds to the surrounding boreal forest canopy. For this study, LAI values based on Moderate Resolution Imaging Spectroradiometer satellite imagery were obtained and compared to ground-based measurements, and two limitations with the satellite data were identified. The satellite LAI data firstly represents one-sided LAI values that do not account for the enhanced LAI associated with needle leaf geometry, and secondly, underestimates LAI in winter-time northern latitude regions. An approach for adjusting satellite LAI values for different boreal forest cover types, as a function of time of year, was developed to produce more representative LAI values that can be used by air quality sulphur and nitrogen deposition models. The application of the approach increases the AOSR average LAI for January from 0.19 to 1.40, which represents an increase of 637%. Based on the application of the CALMET/CALPUFF model system, this increases the predicted regional average dry deposition of sulphur and nitrogen compounds for January by factors of 1.40 to 1.30, respectively. The corresponding AOSR average LAI for July increased from 2.8 to 4.0, which represents an increase of 43%. This increases the predicted regional average dry deposition of sulphur and nitrogen compounds for July by factors of 1.28 to 1.22, respectively. These findings reinforce the importance of the LAI metric for predicting the dry deposition of sulphur and nitrogen compounds. While satellite data can provide enhanced spatial and temporal resolution, adjustments are identified to overcome associated limitations. This work is considered to have application for other deposition model studies where

  19. Geological characteristics and resource potentials of oil shale in Ordos Basin, Center China

    Energy Technology Data Exchange (ETDEWEB)

    Yunlai, Bai; Yingcheng, Zhao; Long, Ma; Wu-jun, Wu; Yu-hu, Ma

    2010-09-15

    It has been shown that not only there are abundant oil, gas, coal, coal-bed gas, groundwater and giant uranium deposits but also there are abundant oil shale resources in Ordos basin. It has been shown also that the thickness of oil shale is, usually, 4-36m, oil-bearing 1.5%-13.7%, caloric value 1.66-20.98MJ/kg. The resource amount of oil shale with burial depth less than 2000 m is over 2000x108t (334). Within it, confirmed reserve is about 1x108t (121). Not only huge economic benefit but also precious experience in developing oil shale may be obtained in Ordos basin.

  20. Huge uterine-cervical diverticulum mimicking as a cyst

    Directory of Open Access Journals (Sweden)

    S Chufal

    2012-01-01

    Full Text Available Here we report an incidental huge uterine-cervical diverticulum from a total abdominal hysterectomy specimen in a perimenopausal woman who presented with acute abdominal pain. The diverticulum was mimicking with various cysts present in the lateral side of the female genital tract. Histopathological examination confirmed this to be a cervical diverticulum with communication to uterine cavity through two different openings. They can attain huge size if left ignored for long duration and present a diagnostic challenge to clinicians, radiologists, as well as pathologists because of its extreme rarity. Therefore, diverticula should also be included as a differential diagnosis. Its histopathological confirmation also highlights that diverticula can present as an acute abdomen, requiring early diagnosis with appropriate timely intervention. Immunohistochemistry CD 10 has also been used to differentiate it from a mesonephric cyst.

  1. [Trends of change in demographic indices of population in the area of oil and gas deposits of the republic of Kazakhstan].

    Science.gov (United States)

    Kenessaryiev, U I; Yerzhanova, A E; Kenessary, D U; Kenessary, A U

    According to assured resources of hydrocarbons the Republic of Kazakhstan (RK) is among ten largest oil countries in the world, trailing only some states of the Middle East, Latin America, as well Russia and the USA. Public health state is the one of most important indices of social development, the manifestation of the economic and sanitaryhygienic welfare, as well as national defense capability and cultural potential of the state. In relation with the intensive development of oil and gas fields the problems of environmental protection and healthcare of the population in these regions occur critically. Therefore, it causes keen interest both from the side of researches and practical health care workers. Rapid development of the oil and gas industry leads to changes in a medical and demographic situation of given regions that is related both with the natural migration of the population and other migratory processes. According to data of the Ministry of Energetics and natural resources of RK, the Karachaganak oil-gas condensate deposit is considered to be the one of the largest in the world. For the next 40 years, the field is becoming the stable financial donor of the country. Currently Karachaganak field is considered to be the one of the largest investment projects in Kazakhstan. The studied oil and gas condensate field is located in the Burlin district of West Kazakhstan region, which is 140 km far from the city of Uralsk and 160 km far from the city of Orenburg. The field was discovered in 1984.

  2. It was huge! Nursing students' first experience at AORN Congress.

    Science.gov (United States)

    Byrne, Michelle; Cantrell, Kelly; Fletcher, Daphne; McRaney, David; Morris, Kelly

    2004-01-01

    AN EXPERIENTIAL KNOWLEDGE of mentoring through nursing students' perspectives may enhance AORN's ability to recruit students to perioperative nursing and aid future planning for student involvement in the Association. IN 2003, four first-year nursing students attended the AORN Congress in Chicago with their nursing instructor and mentor. The students' experiences were captured using a thematic analysis to analyze their journals. THE FIVE COMMON THEMES identified were "it was huge," "exhibits," "student program," "exploring the city," and "suggestions for future planning."

  3. Oils

    Energy Technology Data Exchange (ETDEWEB)

    Cobbett, G T.B.

    1907-07-08

    Crude petroleum having a density of 850 to 900 is purified with sulfuric acid, decanted, mixed with benzine or petrol, and again treated with sulfuric acid and decanted. The remaining acid and coloring-matter are removed by washing with water, or treating with oxalic acid, zinc carbonate, lead carbonate, calcium carbonate, or oxide of zinc. The product is used as a fuel for internal-combustion engines. Specifications No. 28,104, A.D. 1906, and No. 12,606, A.D. 1907, are referred to. According to the Provisional Specification, the process is applicable to shale or schist oil.

  4. The oil sands: A new energy vision for Canada

    International Nuclear Information System (INIS)

    1995-01-01

    Canada's oil sands deposits were considered to offer huge potential for wealth generation and enduring social benefits. This report showed that putting in action the plan developed by the National Task Force on Oil Sands Strategies would help unlock this potential and realize the benefits; the forecast called for a doubling or tripling of oil sands production over the next 25 years. The plan should also predicted an increase in investments in oil sands since the fiscal regime would be stable and the product would be in increasing demand. New capital investment should generate significant environmental, social and economic benefits. The real outcome would be increased national prosperity, since further growth in investment would translate into thousands of skilled jobs across Canada, expansion of government revenues, and improvements to Canada's trade balance. 1 ill

  5. The oil sands: A new energy vision for Canada

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    Canada`s oil sands deposits were considered to offer huge potential for wealth generation and enduring social benefits. This report showed that putting in action the plan developed by the National Task Force on Oil Sands Strategies would help unlock this potential and realize the benefits; the forecast called for a doubling or tripling of oil sands production over the next 25 years. The plan should also predicted an increase in investments in oil sands since the fiscal regime would be stable and the product would be in increasing demand. New capital investment should generate significant environmental, social and economic benefits. The real outcome would be increased national prosperity, since further growth in investment would translate into thousands of skilled jobs across Canada, expansion of government revenues, and improvements to Canada`s trade balance. 1 ill.

  6. Disaster Characteristics and Mitigation Measures of Huge Glacial Debris Flows along the Sichuan-Tibet Railway

    Science.gov (United States)

    Liu, Jinfeng; You, Yong; Zhang, Guangze; Wang, Dong; Chen, Jiangang; Chen, Huayong

    2017-04-01

    The Ranwu-Tongmai section of the Sichuan-Tibet Railway passes through the Palongzangbu River basin which locates in the southeast Qinghai-Tibetan Plateau. Due to widely distributed maritime glacier in this area, the huge glacier debris flows are very developed. Consequently, the disastrous glacier debris flows with huge scale (106-108 m3 for one debris flow event) and damage become one of the key influencing factors for the route alignment of the Sichuan-Tibet Railway. The research on disaster characteristics and mitigation measures of huge glacial debris flows in the study area were conducted by the remote sensing interpretation, field investigation, parameter calculation and numerical simulation. Firstly, the distribution of the glaciers, glacier lakes and glacier debris flows were identified and classified; and the disaster characteristics for the huge glacier debris flow were analyzed and summarized. Secondly, the dynamic parameters including the flood peak discharge, debris flow peak discharge, velocity, total volume of a single debris flow event were calculated. Based on the disaster characteristics and the spatial relation with the railway, some mitigation principles and measures were proposed. Finally, the Guxiang Gully, where a huge glacier debris flow with 2*108m3 in volume occurred in 1953, was selected as a typical case to analyze its disaster characteristics and mitigation measures. The interpretation results show that the glacier area is about 970 km2 which accounts for 19% of the total study area. 130 glacier lakes and 102 glacier debris flows were identified and classified. The Sichuan-Tibet Railway passes through 43 glacier debris flows in the study area. The specific disaster characteristics were analyzed and corresponding mitigation measures were proposed for the route selection of the railway. For the Guxiang Gully, a numerical simulation to simulate the deposition condition at the alluvial fan was conducted. the simulation results show that the

  7. Partial ureterectomy for a huge primary leiomyoma of the ureter

    International Nuclear Information System (INIS)

    Nouralizadeh, A.; Tabib, A.; Taheri, M.; Torbati, P.M.

    2010-01-01

    A case of a huge primary leiomyoma of the ureter in which only partial ureterectomy was performed is presented. The benign nature of the mass was primarily confirmed with frozen section at the time of surgery and then with immunohistochemistry (IHC). To the best of our knowledge, this case is a unique form of leiomyoma of the ureter due to its large size. There have been only ten cases of primary leiomyoma of the ureter reported since 1955 and all of them were very small in size. Our case is considered to be the eleventh. (author)

  8. A huge renal capsular leiomyoma mimicking retroperitoneal sarcoma

    Directory of Open Access Journals (Sweden)

    Lal Anupam

    2009-01-01

    Full Text Available A huge left renal capsular leiomyoma mimicking retroperitoneal sarcoma presented in a patient as an abdominal mass. Computed tomography displayed a large heterogeneous retro-peritoneal mass in the left side of the abdomen with inferior and medial displacement as well as loss of fat plane with the left kidney. Surgical exploration revealed a capsulated mass that was tightly adherent to the left kidney; therefore, total tumor resection with radical left nephrectomy was performed. Histopathology ultimately confirmed the benign nature of the mass. This is the largest leiomyoma reported in literature to the best of our knowledge.

  9. How a huge HEP experiment is designed course

    CERN Multimedia

    CERN. Geneva HR-FAS

    2007-01-01

    More than twenty years after the idea of building the LHC machine was discussed in a workshop in Lausanne in 1984 for the first time, it is instructive to look back on the historical process which has led the community to where we are today with four huge detectors being commissioned and eagerly awaiting first beam collisions in 2008. The main design principles, detector features and performance characteristics of the ATLAS and CMS detectors will be briefly covered in these two lectures with, as an interlude, a wonderful DVD from ATLAS outreach depicting how particles interact and are detected in the various components of the experiments.

  10. A young woman with a huge paratubal cyst

    Directory of Open Access Journals (Sweden)

    Ceren Golbasi

    2016-09-01

    Full Text Available Paratubal cysts are asymptomatic embryological remnants. These cysts are usually diagnosed during adolescence and reproductive age. In general, their sizes are small but can be complicated by rupture, torsion, or hemorrhage. Paratubal cysts are often discovered fortuitously on routine ultrasound examination. We report a 19-year-old female patient who presented with irregular menses and abdominal pain. Ultrasound examination revealed a huge cystic mass at the right adnexial area. The diagnosis was confirmed as paratubal cyst during laporotomy and, hence, cystectomy and right salpingectomy were performed. [Cukurova Med J 2016; 41(3.000: 573-576

  11. The Main Features of the Geological Modeling Process of a Shallow Deposit of Super-Viscous Oil in Aspect of Development Strategy Planning with the Use of Steam‑Assisted Gravity Drainage Method

    Directory of Open Access Journals (Sweden)

    S.P. Novikova

    2017-11-01

    Full Text Available Deficiency of minerals, limited reserves of conventional hydrocarbon raw materials indicates the need to involve in the fuel and energy complex of other sources of hydrocarbons. Fields of super-viscous oil are one of the sources. This article is devoted to the study of sediments of the Permian sedimentary complex containing super-viscous oil deposits. The geological structure of the Lower Kazanian and Ufimian deposits is considered. A characteristic of the Sheshmian sandstone pack is given. The analysis of the set of geophysical studies is presented. Modeling of a shallow super-viscous oil deposit based on the lithologic-technological types of the productive formation was carried out, based on the results of drilling, core material and logging. The features of constructing the structural framework of a three-dimensional grid, and a lithological-technological model are highlighted. The distribution of porosity, permeability and oil saturation is described.

  12. Huge increase in gas phase nanoparticle generation by pulsed direct current sputtering in a reactive gas admixture

    Science.gov (United States)

    Polonskyi, Oleksandr; Peter, Tilo; Mohammad Ahadi, Amir; Hinz, Alexander; Strunskus, Thomas; Zaporojtchenko, Vladimir; Biederman, Hynek; Faupel, Franz

    2013-07-01

    Using reactive DC sputtering in a gas aggregation cluster source, we show that pulsed discharge gives rise to a huge increase in deposition rate of nanoparticles by more than one order of magnitude compared to continuous operation. We suggest that this effect is caused by an equilibrium between slight target oxidation (during "time-off") and subsequent sputtering of Ti oxides (sub-oxides) at "time-on" with high power impulse.

  13. Distributed and parallel approach for handle and perform huge datasets

    Science.gov (United States)

    Konopko, Joanna

    2015-12-01

    Big Data refers to the dynamic, large and disparate volumes of data comes from many different sources (tools, machines, sensors, mobile devices) uncorrelated with each others. It requires new, innovative and scalable technology to collect, host and analytically process the vast amount of data. Proper architecture of the system that perform huge data sets is needed. In this paper, the comparison of distributed and parallel system architecture is presented on the example of MapReduce (MR) Hadoop platform and parallel database platform (DBMS). This paper also analyzes the problem of performing and handling valuable information from petabytes of data. The both paradigms: MapReduce and parallel DBMS are described and compared. The hybrid architecture approach is also proposed and could be used to solve the analyzed problem of storing and processing Big Data.

  14. Huge Intracanal lumbar Disc Herniation: a Review of Four Cases

    Directory of Open Access Journals (Sweden)

    Farzad Omidi-Kashani

    2016-01-01

    Full Text Available Lumbar disc herniation (LDH is the most common cause of sciatica and only in about 10% of the affected patients, surgical intervention is necessary. The side of the patient (the side of most prominent clinical complaints is usually consistent with the side of imaging (the side with most prominent disc herniation on imaging scans. In this case series, we presented our experience in four cases with huge intracanal LDH that a mismatch between the patient’s side and the imaging’s side was present. In these cases, for deciding to do the operation, the physicians need to rely more on clinical findings, but for deciding the side of discectomy, imaging characteristic (imaging side may be a more important criterion.

  15. A parallel solver for huge dense linear systems

    Science.gov (United States)

    Badia, J. M.; Movilla, J. L.; Climente, J. I.; Castillo, M.; Marqués, M.; Mayo, R.; Quintana-Ortí, E. S.; Planelles, J.

    2011-11-01

    HDSS (Huge Dense Linear System Solver) is a Fortran Application Programming Interface (API) to facilitate the parallel solution of very large dense systems to scientists and engineers. The API makes use of parallelism to yield an efficient solution of the systems on a wide range of parallel platforms, from clusters of processors to massively parallel multiprocessors. It exploits out-of-core strategies to leverage the secondary memory in order to solve huge linear systems O(100.000). The API is based on the parallel linear algebra library PLAPACK, and on its Out-Of-Core (OOC) extension POOCLAPACK. Both PLAPACK and POOCLAPACK use the Message Passing Interface (MPI) as the communication layer and BLAS to perform the local matrix operations. The API provides a friendly interface to the users, hiding almost all the technical aspects related to the parallel execution of the code and the use of the secondary memory to solve the systems. In particular, the API can automatically select the best way to store and solve the systems, depending of the dimension of the system, the number of processes and the main memory of the platform. Experimental results on several parallel platforms report high performance, reaching more than 1 TFLOP with 64 cores to solve a system with more than 200 000 equations and more than 10 000 right-hand side vectors. New version program summaryProgram title: Huge Dense System Solver (HDSS) Catalogue identifier: AEHU_v1_1 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHU_v1_1.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 87 062 No. of bytes in distributed program, including test data, etc.: 1 069 110 Distribution format: tar.gz Programming language: Fortran90, C Computer: Parallel architectures: multiprocessors, computer clusters Operating system

  16. Airway management of a rare huge-size supraglottic mass

    International Nuclear Information System (INIS)

    Abou-Zeid, Haitham A.; Al-Ghamdi, Abdel Mohsin A.; Al-Qurain, Abdel-Aziz A.; Mokhazy, Khalid M.

    2006-01-01

    Laser excision of a huge-sized supraglottic mass nearly obstructing the airway passage is a real challenge to anesthesiologists. Upper airway obstruction due to neoplasm in supraglottic region, is traditionally managed by preoperative tracheostomy, however, such a common procedure can potentially have an impact on long-term outcome. A 26-year-old patient presented with dysphagia caused by left cystic vallecular synovial sarcoma. The airway was successfully secured via fiberoptic bronchoscopy, followed by excision of the supraglottic tumor with CO2 laser surgery. Tracheostomy was not required. The patient was discharged from the hospital on the 4th day of surgery. This case, highlights the possibility to secure the airway passage without performing preoperative tracheostomy resulting in good outcome and short hospital stay. (author)

  17. Huge endometrioma mimicking mucinous cystadenoma on MR : A case report

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Im Kyung; Kim, Bong Soo; Nam, Kung Sook; Kim, Heung Cheol; Yoo, Yun Sik; Lee, Mee Ran; Hwang, Woo Chul [Hallym University, Chunchon (Korea, Republic of)

    2001-12-01

    Endometriosis is a relatively common gynecologic disease affecting women during their reproductive years. For its diagnosis, magnetic resonance imaging has been shown to have greater specificity than other modalities. Although lesions may show variable signal intensity due to numerous stages of bleeding, the characteristic finding of endometrioma which distinguishes it from other ovarian cystic masses is relatively high signal intensity on T1-weighted images and heterogeneous signal intensity with prominent shading on 72-weighted images. We report an atypical case involving a huge endometrioma. Because of varying signal intensity on T1- and T2-weighted images and scanty shading on T2-weighted images, the findings were misinterpreted and mucinous cystadenoma was diagnosed.

  18. Oil vaporizer

    Energy Technology Data Exchange (ETDEWEB)

    Dumontier, F

    1904-03-31

    An oil burner particularly applicable to heavy oils, composed essentially of one or more gasification chambers, heated by the flame from the burners, to which the combustible gases are fed by the collectors suitably fixed on the chambers, all parts of the apparatus and especially the gasification chambers being easily demountable to permit cleaning, and all arranged in such a manner as to avoid fouling by reducing or localizing the deposition of solid deposits in the coking chamber.

  19. Assessment of ablative margin after radiofrequency ablation for hepatocellular carcinoma; comparison between magnetic resonance imaging with ferucarbotran and enhanced CT with iodized oil deposition

    International Nuclear Information System (INIS)

    Koda, Masahiko; Tokunaga, Shiho; Fujise, Yuki; Kato, Jun; Matono, Tomomitsu; Sugihara, Takaaki; Nagahara, Takakazu; Ueki, Masaru; Murawaki, Yoshikazu; Kakite, Suguru; Yamashita, Eijiro

    2012-01-01

    Background and purpose: Our aim was to investigate whether magnetic resonance imaging (MRI) with ferucarbotran administered prior to radiofrequency ablation could accurately assess ablative margin when compared with enhanced computed tomography (CT) with iodized oil marking. Materials and methods: We enrolled 27 patients with 32 hepatocellular carcinomas in which iodized oil deposits were visible throughout the nodule after transcatheter arterial chemoembolization. For these nodules, radiofrequency ablation was performed after ferucarbotran administration. We then performed T2-weighted MRI after 1 week and enhanced CT after 1 month. T2-weighted MRI demonstrated the ablative margin as a low-intensity rim. We classified the margin into three grades; margin (+): high-intensity area with a continuous low-intensity rim; margin zero: high-intensity area with a discontinuous low-intensity rim; and margin (−): high-intensity area extending beyond the low-intensity rim. Results: In 28 (86%) of 32 nodules, there was agreement between MRI and CT. The overall agreement between for the two modalities in the assessment of ablative margin was good (κ = 0.759, 95% confidence interval: 0.480–1.000, p < 0.001). In four nodules, ablative margins on MRI were underestimated by one grade compared with CT. Conclusion: MRI using ferucarbotran is less invasive and allows earlier assessment than CT. The MRI technique performed similarly to enhanced CT with iodized oil marking in evaluating the ablative margin after radiofrequency ablation.

  20. Deposition of NORM generated by the oil and gas industries in Brazil; Deposicao de NORM gerado pelas industrias de petroleo e gas no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Schenato, Flavia; Aguiar, Lais A.; Leal, Marco Aurelio; Ruperti Junior, Nerbe, E-mail: schenato@cnen.gov.br [Comissao Nacional de Energia Nuclear (COREJ/CNEN), Rio de Janeiro, RJ (Brazil). Coordenacao de Rejeitos Radioativos

    2013-07-01

    The natural occurring radioactive material (NORM) produced during E and P activities in the petroleum industry presents important implications for the management of solid wastes. The waste management strategy and final disposal policy regarding NORM should meet general radiation protection principles to ensure the long periods during which control may be necessary. The Brazilian Nuclear Energy Commission (CNEN) is responsible for the final destination of the radioactive waste produced in national territory. The Federal Law 10308/2001 establishes standards for the final destination of the radioactive waste providing information to the installation and operation of storage and disposal facilities. The licensee is responsible for the storage facilities, while CNEN is in charge of design, construction and installation of final disposal facilities, being possible to delegate such activities to a third parties, since preserved its full responsibility. The CNEN's Resolution on licensing of radioactive waste deposits, which is in the final approval stage, classifies the wastes generated by the E and P oil and gas industries and suggests two disposal methods to them, near surface and depth repositories, to be defined by safety analysis, but no formal criteria for disposal is really established. The guidelines for the safety analysis set for the licensing process of this class of waste is applied only to the implementation of interim storage facilities but not to repositories. Considering the large volume of NORM generated by the activities of E and P oil and gas industries and the growing demand of production with the exploration of pre-salt oil deposits in Brazil, this paper aims to discuss the development of national guidelines for the disposal of this class of waste to ensure long term safety and acceptability of disposal methods. (author)

  1. Selective and persistent deposition and gradual drainage of iodized oil, Lipiodol in the hepatocellular carcinoma after injection into the feeding hepatic artery

    International Nuclear Information System (INIS)

    Okayasu, I.; Hatakeyama, S.; Yoshida, T.; Yoshimatsu, S.; Tsuruta, K.; Miyamoto, H.; Kimula, Y.

    1988-01-01

    The selective and long-term deposition of iodized oil in the hepatocellular carcinoma (HCC) and its gradual drainage were clinicopathologically analyzed in 13 cases. All patients were Japanese and had an intrahepatic arterial injection of Lipiodol (LIP) mixed with Mitomycin C. The comparison among the follow-up computerized tomography (CT) findings, the observation of the soft x-ray radiogram, and histopathologic studies of the surgical or autopsy materials revealed that the selective deposition of LIP in HCC lasted for a long term, particularly in cases treated by LIP combined with transcatheter arterial embolization (TAE). Also revealed was an extremely gradual decrease of LIP from the HCC. It was thus postulated that, mainly, the accumulated macrophages surrounding LIP around the necrotic cancer tissue and, partially, the intrahepatic lymphatic system itself contributed to this drainage. Further, in histologic sections with lipid staining, x-ray microanalysis proved that the lipid droplets in the cancer tissue included highly concentrated iodine, as a deposition of LIP

  2. Prediction of critical transport velocity for preventing sand deposition in gas-oil multiphase production and well systems

    Energy Technology Data Exchange (ETDEWEB)

    Bello, O.O.; Reinicke, K.M. [Technische Univ. Clausthal, Clausthal-Zellerfeld (Germany). Inst. of Petroleum Engineering; Teodoriu, C. [Texas A and M Univ., College Station, TX (United States). Dept. of Petroleum Engineering

    2008-10-23

    The critical transport velocity is one of the key parameters for gas-oil-sand multiphase production and well system design and safe operation. Existing American Petroleum Institute Recommended Practice 14E (API RP 14E) for the sizing of multiphase flow systems suggests an equation to calculate threshold transport velocity. This equation only considers mixture density and does not account for factors such as fluid properties, gas-liquid flow patterns, sand loading, sand particle size, size distributions, shape factor and density. This work presents an improved computational methodology, which can be applied to estimate the critical transport velocity required to ensure efficient performance of gas-oil-sand multiphase production and well systems. The improved method is based on the modelling of three-phase gas-oil-sand pipe flow physics from first principle. Computations of the critical transport velocities show reasonable agreement with values calculated from mechanistic model (Danielson, 2007) for a relatively wide range of design and operating conditions. Compared with the mechanistic model (Danielson, 2007), the present method has no imposed limitations to the range of applicability. It is also takes into adequate account the effects of operating pressure, flow geometry, sand particle size, size distribution and shape factor, which have considerable influence on the critical transport velocity in gas-oil-sand multiphase production and well systems. (orig.)

  3. The importance of atmospheric base cation deposition for preventing soil acidification in the Athabasca Oil Sands Region of Canada

    Science.gov (United States)

    Shaun A. Watmough; Colin J. Whitfield; Mark E. Fenn

    2014-01-01

    Industrial activities in the oil sands region of Alberta, Canada have resulted in greatly elevated emissions of SO2 and N (NOx and NH3) and there are concerns over possible widespread ecosystem acidification. Acid sensitive soils in the region are common and have very low base cation weathering rates...

  4. Handling of natural occurring radioactive deposits in the oil and gas industry in Norway, United Kingdom and the Netherlands; Haandtering av radioaktive avleiringer i olje- og gassproduksjon i Norge, Storbritania og Nederland

    Energy Technology Data Exchange (ETDEWEB)

    Lysebo, I.; Tufto, P

    1999-03-01

    Deposits containing naturally occurring radioactive materials is an increasing problem in oil and gas production. Laws and regulations in thisarea is under preparation, and it is a wish for harmonization with the other oil and gas producing countries in the North Sea. The report gives an overview of amounts of waste and activity levels, decontamination methods and waste handling in Norway, Great Britain and the Netherlands.

  5. Black hole firewalls require huge energy of measurement

    Science.gov (United States)

    Hotta, Masahiro; Matsumoto, Jiro; Funo, Ken

    2014-06-01

    The unitary moving mirror model is one of the best quantum systems for checking the reasoning of the original firewall paradox of Almheiri et al. [J. High Energy Phys. 02 (2013) 062] in quantum black holes. Though the late-time part of radiations emitted from the mirror is fully entangled with the early part, no firewall exists with a deadly, huge average energy flux in this model. This is because the high-energy entanglement structure of the discretized systems in almost maximally entangled states is modified so as to yield the correct description of low-energy effective field theory. Furthermore, the strong subadditivity paradox of firewalls is resolved using nonlocality of general one-particle states and zero-point fluctuation entanglement. Due to the Reeh-Schlieder theorem in quantum field theory, another firewall paradox is inevitably raised with quantum remote measurements in the model. We resolve this paradox from the viewpoint of the energy cost of measurements. No firewall appears, as long as the energy for the measurement is much smaller than the ultraviolet cutoff scale.

  6. Progressive skin necrosis of a huge occipital encephalocele

    Science.gov (United States)

    Andarabi, Yasir; Nejat, Farideh; El-Khashab, Mostafa

    2008-01-01

    Objects: Progressive skin necrosis of giant occipital encephalocoele is an extremely rare complication found in neonates. Infection and ulceration of the necrosed skin may lead to meningitis or sepsis. We present here a neonate with giant occipital encephalocoele showing progressive necrosis during the first day of his life. Methods: A newborn baby was found to have a huge mass in the occipital region, which was covered by normal pink-purplish skin. During the last hours of the first day of his life, the sac started becoming ulcerated accompanied with a rapid color change in the skin, gradually turning darker and then black. The neonate was taken up for urgent excision and repair of the encephalocele. Two years after the operation, he appears to be well-developed without any neurological problems. Conclusion: Necrosis may have resulted from arterial or venous compromise caused by torsion of the pedicle during delivery or after birth. The high pressure inside the sac associated with the thin skin of the encephalocoele may be another predisposing factor. In view of the risk of ulceration and subsequent infection, urgent surgery of the necrotizing encephalocele is suggested. PMID:19753210

  7. Progressive skin necrosis of a huge occipital encephalocele

    Directory of Open Access Journals (Sweden)

    Andarabi Yasir

    2008-01-01

    Full Text Available Objects: Progressive skin necrosis of giant occipital encephalocoele is an extremely rare complication found in neonates. Infection and ulceration of the necrosed skin may lead to meningitis or sepsis. We present here a neonate with giant occipital encephalocoele showing progressive necrosis during the first day of his life. Methods: A newborn baby was found to have a huge mass in the occipital region, which was covered by normal pink-purplish skin. During the last hours of the first day of his life, the sac started becoming ulcerated accompanied with a rapid color change in the skin, gradually turning darker and then black. The neonate was taken up for urgent excision and repair of the encephalocele. Two years after the operation, he appears to be well-developed without any neurological problems. Conclusion: Necrosis may have resulted from arterial or venous compromise caused by torsion of the pedicle during delivery or after birth. The high pressure inside the sac associated with the thin skin of the encephalocoele may be another predisposing factor. In view of the risk of ulceration and subsequent infection, urgent surgery of the necrotizing encephalocele is suggested.

  8. [A Case of Huge Colon Cancer Accompanied with Severe Hypoproteinemia].

    Science.gov (United States)

    Hiraki, Sakurao; Kanesada, Kou; Harada, Toshio; Tada, Kousuke; Fukuda, Shintaro

    2017-11-01

    We report a case of huge colon cancer accompanied with severe hypoproteinemia. A7 4-year-old woman was referred to our hospital because of abdominal fullness. Blood examinations revealed anemia(hemoglobin 8.8 g/dL)and sever hypopro- teinemia(total protein 4.5 g/dL, albumin 1.1 g/dL). Computed tomography examination of abdomen revealed ascites and large tumor(12.5×10.5 cm)at the right side colon. By further examinations ascending colon cancer without distant metastasis was diagnosed, then we performed right hemicolectomy and primary intestinal anastomosis by open surgery. Ahuge type 1 tumor(18×12 cm)was observed in the excised specimen, which invaded to terminal ileum directly. The tumor was diagnosed moderately differentiated adenocarcinoma without lymph node metastasis(pT3N0M0, fStage II ). Postoperative course was uneventful and serum protein concentration recovered gradually to normal range. Protein leakage from the tumor cannot be proved by this case, so we can't diagnose as protein-losing enteropathy, but we strongly doubt this etiology from postoperative course in this case.

  9. A huge bladder calculus causing acute renal failure.

    Science.gov (United States)

    Komeya, Mitsuru; Sahoda, Tamami; Sugiura, Shinpei; Sawada, Takuto; Kitami, Kazuo

    2013-02-01

    A 81-year-old male was referred to our emergency outpatient unit due to acute renal failure. The level of serum creatinine was 276 μmol/l. A CT scan showed bilateral hydronephroureter, large bladder stone (7 cm × 6 cm × 6 cm) and bladder wall thickness. He was diagnosed as post renal failure due to bilateral hydronephroureter. Large bladder stone is thought to be the cause of bilateral hydronephroureter and renal failure. To improve renal failure, we performed open cystolithotomy and urethral catheterization. Three days after the surgery, the level of serum creatinine decreased to 224 μmol/l. He was discharged from our hospital with uneventful course. Bladder calculus is thought to be a rare cause of renal failure. We summarize the characteristics of bladder calculus causing renal failure. We should keep that long-term pyuria and urinary symptom, and repeated urinary tract infection can cause huge bladder calculus and renal failure in mind.

  10. Influence of the kind of fuel oil on the deposit composition in the diesel engine combustion chamber

    Energy Technology Data Exchange (ETDEWEB)

    Tarkowski, P.; Sarzynski, J.; Budzynski, P.; Paluch, R.; Wiertel, M. [Technical University of Lublin, Lublin (Poland)

    2001-08-10

    The authors studied deposits from combustion chambers of high-pressure engines supplied with standard fuel (SO) and ecological fuel of City-Diesel type. Chemical analysis, X-ray diffractograms, Moessbauer absorption and additionally Raman wavenumber measurements were made. The wearing of some engine elements was examined by the profilometric method. By using ecological fuel, the deposits were shown to contain four to give times less iron compounds than standard fuel supply. This accounts for a smaller attrition of the combustion chamber elements, and thus longer durability of the engine. 7 refs., 4 figs., 5 tabs.

  11. Qualitative analysis of thin films of crude oil deposits on the metallic substrate by Fourier transform infrared (FTIR) microscopy

    DEFF Research Database (Denmark)

    Batina, N.; Reyna-Cordova, A.; Trinidad-Reyes, Y.

    2005-01-01

    Thin films of crude oil samples were prepared for atomic force microscopy (AFM) analysis on the gold substrate. Sample preparation involved evaporation during a long (24 h) but mild thermal exposure (80 °C). Fourier transform infrared (FTIR) microscopy (reflectance spectroscopy) was employed...... of oxidation state was compared to surface morphology data by AFM previously reported. The reported results emphasize the advantage of complementary techniques (AFM/FTIR microscopy) in the analysis of petroleum thin films that should be considered during analysis and interpretation of this type of data....... to determinate the quality of the thin film surface, before the morphology characterization. The surface reflectance spectra were compared to direct transmittance FTIR of liquid oil samples. The two FTIR techniques showed different spectral characteristics related to oxygenated functionalities. This clearly...

  12. MRI Verification of a Case of Huge Infantile Rhabdomyoma.

    Science.gov (United States)

    Ramadani, Naser; Kreshnike, Kreshnike Dedushi; Muçaj, Sefedin; Kabashi, Serbeze; Hoxhaj, Astrit; Jerliu, Naim; Bejiçi, Ramush

    2016-04-01

    Cardiac rhabdomyoma is type of benign myocardial tumor that is the most common fetal cardiac tumor. Cardiac rhabdomyomas are usually detected before birth or during the first year of life. They account for over 60% of all primary cardiac tumors. A 6 month old child with coughing and obstruction in breathing, was hospitalized in the Pediatric Clinic in UCCK, Pristine. The difficulty of breathing was heard and the pathological noise of the heart was noticed from the pediatrician. In the echo of the heart at the posterior and apico-lateral part of the left ventricle a tumoral mass was presented with the dimensions of 56 × 54 mm that forwarded the contractions of the left ventricle, the mass involved also the left ventricle wall and was not vascularized. The right ventricle was deformed and with the shifting of the SIV on the right the contractility was preserved. Aorta, the left arch and AP were normal with laminar circulation. The pericard was presented free. Radiography of thoracic organs was made; it resulted on cardiomegaly and significant bronchovascular drawing. It was completed with an MRI and it resulted on: Cardiomegaly due to large tumoral mass lesion (60×34 mm) involving lateral wall of left ventricle. It was isointense to the muscle on T1W images, markedly hyperintense on T2W images. There were a few septa or bant like hypointensities within lesion. On postcontrast study it showed avid enhancement. The left ventricle volume was decreased. Mild pericardial effusion was also noted. Surgical intervention was performed and it resulted on the histopathological aspect as a huge infantile rhadbomyoma. In most cases no treatment is required and these lesions regress spontaneously. Patients with left ventricular outflow tract obstruction or refractory arrhythmias respond well to surgical excision. Rhabdomyomas are frequently diagnosed by means of fetal echocardiography during the prenatal period.

  13. MRI Verification of a Case of Huge Infantile Rhabdomyoma

    Science.gov (United States)

    Ramadani, Naser; Kreshnike, Kreshnike Dedushi; Muçaj, Sefedin; Kabashi, Serbeze; Hoxhaj, Astrit; Jerliu, Naim; Bejiçi, Ramush

    2016-01-01

    Introduction: Cardiac rhabdomyoma is type of benign myocardial tumor that is the most common fetal cardiac tumor. Cardiac rhabdomyomas are usually detected before birth or during the first year of life. They account for over 60% of all primary cardiac tumors. Case report: A 6 month old child with coughing and obstruction in breathing, was hospitalized in the Pediatric Clinic in UCCK, Pristine. The difficulty of breathing was heard and the pathological noise of the heart was noticed from the pediatrician. In the echo of the heart at the posterior and apico-lateral part of the left ventricle a tumoral mass was presented with the dimensions of 56 × 54 mm that forwarded the contractions of the left ventricle, the mass involved also the left ventricle wall and was not vascularized. The right ventricle was deformed and with the shifting of the SIV on the right the contractility was preserved. Aorta, the left arch and AP were normal with laminar circulation. The pericard was presented free. Radiography of thoracic organs was made; it resulted on cardiomegaly and significant bronchovascular drawing. It was completed with an MRI and it resulted on: Cardiomegaly due to large tumoral mass lesion (60×34 mm) involving lateral wall of left ventricle. It was isointense to the muscle on T1W images, markedly hyperintense on T2W images. There were a few septa or bant like hypointensities within lesion. On postcontrast study it showed avid enhancement. The left ventricle volume was decreased. Mild pericardial effusion was also noted. Surgical intervention was performed and it resulted on the histopathological aspect as a huge infantile rhadbomyoma. Conclusion: In most cases no treatment is required and these lesions regress spontaneously. Patients with left ventricular outflow tract obstruction or refractory arrhythmias respond well to surgical excision. Rhabdomyomas are frequently diagnosed by means of fetal echocardiography during the prenatal period. PMID:27147810

  14. Mazeikiu oil refiner slammed by anti-monopoly authorities, faces huge fines

    Index Scriptorium Estoniae

    2005-01-01

    Euroopa Konkurentsiamet leidis uurimise käigus, et Mazeikiu Nafta ja selle haru Mazeikiu Naftos Prekybos Namai võivad oma strateegia ja hindadega olla kuritarvitanud oma juhtpositsiooni Leedu, Läti ja Eesti turul, mõjutanud kütuse hinda ja diskrimineerinud teatud ettevõtteid kasutades erinevaid kitsendusi

  15. Russia's huge Gazprom struggles to adjust to new realities

    International Nuclear Information System (INIS)

    Korchemkin, M.B.

    1993-01-01

    The Russian joint-stock company Gazprom, successor to Gazprom of the former U.S.S.R. and the world's largest gas company, faces a crisis of direction in the middle years of this decade. With recent memories of annual additions to its transmission pipeline capacity of more than 6,200 miles, Gazprom officials must face the economic and operational realities that call for rehabilitation projects rather than new construction. Additionally, the overall demand for natural gas in the former Soviet Union (FSU) is leveling as the economies and energy use of all customer countries are declining and gas has already supplanted oil nearly energy-where possible. With the European gas market showing limited space for additional gas, Gazprom's major task in the short-term must be to maintain current production and supply levels. The paper discusses reserves and production, the transmission system, gas exports, the costs of Russian gas, Gazprom's prospects, and major obstacles

  16. The influence of sublethal deposits of agricultural mineral oil on the functional and numerical responses of Phytoseiulus persimilis (Acari: Phytoseiidae) to its prey, Tetranychus urticae (Acari: Tetranychidae).

    Science.gov (United States)

    Xue, Yingen; Meats, Alan; Beattie, G Andrew C; Spooner-Hart, Robert; Herron, Grant A

    2009-08-01

    Occasional pesticide application in integrated pest management to at least part of a crop requires that any biological control agents must re-invade previously sprayed areas in order that resurgent pests can be constrained. The ability of the phytoseiid predatory mite Phytoseiulus persimilis to feed on adult two-spotted spider mite (TSSM) Tetranychus urticae on excised leaf discs in both control conditions and in a treatment with a sub lethal residue of agricultural mineral oil (AMO) was assessed. The predator exhibited a Type II functional response with the asymptote significantly higher in the AMO conditions due to the fact that the prey grew slower and reached a smaller size in this treatment. In terms of prey volume eaten, the satiation level of the predator was unchanged by the AMO deposits. The numbers of eggs produced by adult P. persimilis females at densities of 4, 8 and 16 TSSM adult females/disc in the control were significantly higher than those in the AMO treatment, but were similar for the higher density levels, 32 and 64 prey per disc. Thus the functional response in terms of volume of prey eaten explained the numerical response in terms of predator eggs produced. The presence of AMO deposits when the prey were at high density had no effect on predator efficiency (volume eaten) but resulted in a lower intake than that in control conditions when there was a greater distance between prey.

  17. Seismic modeling of fluvial-estuarine deposits in the Athabasca oil sands using ray-tracing techniques, Steepbank River area, northeastern Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Langenberg, C. W.; Hein, F. J. [Alberta Energy and Utilities Board, Edmonton, AB (Canada); Lawton, D.; Cunningham, J. [Calgary Univ., Dept. of Geology and Geophysics, Calgary, AB (Canada)

    2002-03-01

    Seismic reflection characteristics of contrasting channel geometries in a five-section portion of the Steepbank River are modeled using ray-tracing techniques. Outcrop lithofacies associations are used to create a seismic model that can be used as a subsurface analog of other similar oil-sands successions. At least four channel complexes based on stratal bounding surfaces, arrangement of lithofacies, and consistent paleoflow patterns have been identified. The lower part of each channel complex contains trough crossbedded sandstone, exhibiting high porosity and permeability. These sandstones were deposited in channel axes and are the highest grade bitumen deposits in the area. The upper parts of the channels contain significantly lower bitumen saturation values due to common interbedded mudstone. Nearby wells contain cored and logged intervals that are similar to exposed outcrops in the riverbank. Overall modeling results indicate that channel complexes can be imaged seismically, given data of sufficient quality and frequency. Bitumen grade may be predicted in these seismic lines, which has important consequences for bitumen exploration and extraction in the Steepbank River region. 64 refs., 26 figs.

  18. Singapore refiners in midst of huge construction campaign

    International Nuclear Information System (INIS)

    Land, R.

    1992-01-01

    This paper reports that Singapore's downstream capacity continues to mushroom. Singapore refiners, upbeat about long term prospects for petroleum products demand in the Asia-Pacific region, and are pressing plans to boost processing capacity. Their plans go beyond capacity expansions. They are proceeding with projects to upgrade refineries to emphasize production of higher value products and to further integrate refining capabilities wit the region's petrochemical industry. Planned expansion and upgrading projects at Singapore refineries call for outlays of more than $1 billion to boost total capacity to about 1.1 million b/d in 1993 and 1.27 million b/d by 1995. That would be the highest level since the mid-1980s, when refiners such as Shell Singapore cut capacity amid an oil glut. Singapore refineries currently are running at effective full capacity of 1.04 million b/d. Meanwhile, Singapore refiners are aggressively courting customers in the Indochina subcontinent, where long isolated centrally planned economies are turning gradually to free markets

  19. The Russian oil

    International Nuclear Information System (INIS)

    Rucker, Laurent

    2003-01-01

    This article proposes a brief discussion of various assessments of Russian oil reserves, of the evolutions of Russian oil production (Russia is the second world producer after Saudi Arabia), of the distribution of Russian oil exports among various regions, and of the decrease of Russian oil consumption between 1992 and 2002. It describes the evolution of the actor system as the oil sector has been largely privatised since 1992, and indicates the main companies which should control the Russia market on a medium term. It also discusses the obstacles for the development of Production Sharing Agreements (PSA) between these companies. It addresses the issue of modernisation of the oil transport system as its status and its condition are often an obstacle to oil export for Russian companies. The article finally discusses the price issue, the relationship between Russia and other OPEC countries, and the need for huge investments

  20. Assessment of multi-trophic changes in a shallow boreal lake simultaneously exposed to climate change and aerial deposition of contaminants from the Athabasca Oil Sands Region, Canada.

    Science.gov (United States)

    Summers, Jamie C; Kurek, Joshua; Rühland, Kathleen M; Neville, Erin E; Smol, John P

    2017-08-15

    The Athabasca Oil Sands Region (AOSR) has been intensely developed for industrial bitumen extraction and upgrading since the 1980s. A paucity of environmental monitoring prior to development raises questions about baseline conditions in freshwater systems in the region and ecological responses to industrial activities. Further, climatic changes prompt questions about the relative roles of climate and industry in shaping aquatic ecosystems through time. We use aquatic bioindicators from multiple trophic levels, concentrations of petrogenic contaminants (dibenzothiophenes), and spectrally-inferred chlorophyll-a preserved in well-dated sediments of a closed-basin, shallow lake ~50km away from the main area of industry, in conjunction with climate observations, to assess how the biotic assemblages of a typical AOSR lake have changed during the past ~75years. We examine the contributions of the area's stressors in structuring aquatic communities. Increases in sedimentary measures of petrogenic contaminants provide clear evidence of aerial contaminant deposition from local industry since its establishment, while climate records demonstrate consistent warming and a recent period of reduced precipitation. Quantitative comparisons of biological assemblages from before and after the establishment of regional industry find significant (pshallow systems. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. The Osceola Mudflow from Mount Rainier: Sedimentology and hazard implications of a huge clay-rich debris flow

    Science.gov (United States)

    Vallance, J.W.; Scott, K.M.

    1997-01-01

    The 3.8 km3 Osceola Mudflow began as a water-saturated avalanche during phreatomagmatic eruptions at the summit of Mount Rainier about 5600 years ago. It filled valleys of the White River system north and northeast of Mount Rainier to depths of more than 100 m, flowed northward and westward more than 120 km, covered more than 200 km2 of the Puget Sound lowland, and extended into Puget Sound. The lahar had a velocity of ???19 m/s and peak discharge of ???2.5 ?? 106 m3/s, 40 to 50 km downstream, and was hydraulically dammed behind a constriction. It was coeval with the Paradise lahar, which flowed down the south side of Mount Rainier, and was probably related to it genetically. Osceola Mudflow deposits comprise three facies. The axial facies forms normally graded deposits 1.5 to 25 m thick in lowlands and valley bottoms and thinner ungraded deposits in lowlands; the valley-side facies forms ungraded deposits 0.3 to 2 m thick that drape valley slopes; and the hummocky facies, interpreted before as a separate (Greenwater) lahar, forms 2-10-m-thick deposits dotted with numerous hummocks up to 20 m high and 60 m in plan. Deposits show progressive downstream improvement in sorting, increase in sand and gravel, and decrease in clay. These downstream progressions are caused by incorporation (bulking) of better sorted gravel and sand. Normally graded axial deposits show similar trends from top to bottom because of bulking. The coarse-grained basal deposits in valley bottoms are similar to deposits near inundation limits. Normal grading in deposits is best explained by incremental aggradation of a flow wave, coarser grained at its front than at its tail. The Osceola Mudflow transformed completely from debris avalanche to clay-rich (cohesive) lahar within 2 km of its source because of the presence within the preavalanche mass of large volumes of pore water and abundant weak hydrothermally altered rock. A survey of cohesive lahars suggests that the amount of hydrothermally

  2. Newtonian self-gravitating system in a relativistic huge void universe model

    Energy Technology Data Exchange (ETDEWEB)

    Nishikawa, Ryusuke; Nakao, Ken-ichi [Department of Mathematics and Physics, Graduate School of Science, Osaka City University, 3-3-138 Sugimoto, Sumiyoshi, Osaka 558-8585 (Japan); Yoo, Chul-Moon, E-mail: ryusuke@sci.osaka-cu.ac.jp, E-mail: knakao@sci.osaka-cu.ac.jp, E-mail: yoo@gravity.phys.nagoya-u.ac.jp [Division of Particle and Astrophysical Science, Graduate School of Science, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8602 (Japan)

    2016-12-01

    We consider a test of the Copernican Principle through observations of the large-scale structures, and for this purpose we study the self-gravitating system in a relativistic huge void universe model which does not invoke the Copernican Principle. If we focus on the the weakly self-gravitating and slowly evolving system whose spatial extent is much smaller than the scale of the cosmological horizon in the homogeneous and isotropic background universe model, the cosmological Newtonian approximation is available. Also in the huge void universe model, the same kind of approximation as the cosmological Newtonian approximation is available for the analysis of the perturbations contained in a region whose spatial size is much smaller than the scale of the huge void: the effects of the huge void are taken into account in a perturbative manner by using the Fermi-normal coordinates. By using this approximation, we derive the equations of motion for the weakly self-gravitating perturbations whose elements have relative velocities much smaller than the speed of light, and show the derived equations can be significantly different from those in the homogeneous and isotropic universe model, due to the anisotropic volume expansion in the huge void. We linearize the derived equations of motion and solve them. The solutions show that the behaviors of linear density perturbations are very different from those in the homogeneous and isotropic universe model.

  3. Synthesis of polymeric materials and their use as wax deposition inhibitors of crude oil and its medium distillates; Sintese de materiais polimericos para serem utilizados como inibidores de deposicao de parafinas em petroleo e em seus destilados medios

    Energy Technology Data Exchange (ETDEWEB)

    Mansur, Claudia R.E.; Passos, Leonardo B.; Lucas, Elizabete F. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Macromoleculas]. E-mails: celias@ima.ufrj.br, elucas@ima.ufrj.br; Gonzalez, Gaspar; Alvarez, Dellyo [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas]. E-mails: gaspar@cenpes.petrobras.com.br; dellyo@cenpes.petrobras.com.br

    2003-07-01

    This work aims at the development of polymeric materials to be employed as organic deposition inhibitors - ODI's for petroleum and middle distillate of petroleum, such as lube oils. The additives were obtained by chemical modifications involving esterification reactions of commercial ethylene-co-vinyl acetate (EVA) copolymers and poly(vinyl alcohol) (PVA) with long chain organic acid chlorides. The materials efficiency was tested by pour point measurements of the model system containing commercial paraffin. Data show that chemically modified copolymers had a reasonable performance as pour point reducing agents of the model system used. Moreover, the products were also tested as lube oil additives, and the results showed that the chemically modified copolymers presented a more pronounced influence on the paraffin crystallization process than the non-modified EVA commercial sample. (author)

  4. A case report of surgical debulking for a huge mass of elephantiasis neuromatosa

    Science.gov (United States)

    Hoshi, Manabu; Ieguchi, Makoto; Taguchi, Susumu; Yamasaki, Shinya

    2009-01-01

    Achievement of a safe outcome for an extensive mass with hypervascularity in the extremities requires a surgical team skilled in musculoskeletal oncology. We report debulking surgery for a huge mass of elephantiasis neuromatosa in the right leg of a 56-year old man using the novel Ligasure® vessel sealing system. PMID:21139882

  5. A case report of surgical debulking for a huge mass of elephantiasis neuromatosa

    Directory of Open Access Journals (Sweden)

    Shinya Yamasaki

    2009-07-01

    Full Text Available Achievement of a safe outcome for an extensive mass with hypervascularity in the extremities requires a surgical team skilled in musculoskeletal oncology. We report debulking surgery for a huge mass of elephantiasis neuromatosa in the right leg of a 56-year old man using the novel Ligasure® vessel sealing system.

  6. Constructing Optimal Coarse-Grained Sites of Huge Biomolecules by Fluctuation Maximization.

    Science.gov (United States)

    Li, Min; Zhang, John Zenghui; Xia, Fei

    2016-04-12

    Coarse-grained (CG) models are valuable tools for the study of functions of large biomolecules on large length and time scales. The definition of CG representations for huge biomolecules is always a formidable challenge. In this work, we propose a new method called fluctuation maximization coarse-graining (FM-CG) to construct the CG sites of biomolecules. The defined residual in FM-CG converges to a maximal value as the number of CG sites increases, allowing an optimal CG model to be rigorously defined on the basis of the maximum. More importantly, we developed a robust algorithm called stepwise local iterative optimization (SLIO) to accelerate the process of coarse-graining large biomolecules. By means of the efficient SLIO algorithm, the computational cost of coarse-graining large biomolecules is reduced to within the time scale of seconds, which is far lower than that of conventional simulated annealing. The coarse-graining of two huge systems, chaperonin GroEL and lengsin, indicates that our new methods can coarse-grain huge biomolecular systems with up to 10,000 residues within the time scale of minutes. The further parametrization of CG sites derived from FM-CG allows us to construct the corresponding CG models for studies of the functions of huge biomolecular systems.

  7. A Huge Ovarian Cyst in a Middle-Aged Iranian Female

    Directory of Open Access Journals (Sweden)

    Mohammad Kazem Moslemi

    2010-05-01

    Full Text Available A 38-year-old Iranian woman was found to have a huge ovarian cystic mass. Her presenting symptom was vague abdominal pain and severe abdominal distention. She underwent laparotomy and after surgical removal, the mass was found to be mucinous cystadenoma on histology.

  8. Economic aspects of management of oil industry

    International Nuclear Information System (INIS)

    Purina, I.; Sipkovs, P.

    1997-01-01

    Oil industry is characterised by huge and long-term capital investments. This is one of the most specific features of the industry which has to be taken into account during the preparation of oil industry management framework by the state institutions. This article covers specific issues of cash flows and risks intrinsic in the oil industry projects as well as economic instruments to be applied. (author)

  9. BnDGAT1s Function Similarly in Oil Deposition and Are Expressed with Uniform Patterns in Tissues of Brassica napus

    Directory of Open Access Journals (Sweden)

    Cuizhu Zhao

    2017-12-01

    Full Text Available As an allotetraploid oilcrop, Brassica napus contains four duplicated Acyl-CoA:diacylglycerol acyltransferase 1 (DGAT1 genes, which catalyze one of the rate-limiting steps in triacylglycerol (TAG biosynthesis in plants. While all four BnDGAT1s have been expressed functionally in yeast, their expression patterns in different germplasms and tissues and also consequent contribution to seed oil accumulation in planta remain to be elucidated. In this study, the coding regions of the four BnDGAT1s were expressed in an Arabidopsis dgat1 mutant. All four BnDGAT1s showed similar effects on oil content and fatty acid composition, a result which is different from that observed in previous studies of their expression in yeast. Expression patterns of BnDGAT1s were analyzed in developing seeds of 34 B. napus inbred lines and in different tissues of 14 lines. Different expression patterns were observed for the four BnDGAT1s, which suggests that they express independently or randomly in different germplasm sources. Higher expression of BnDGAT1s was correlated with higher seed oil content lines. Tissue-specific analyses showed that the BnDGAT1s were expressed in a uniform pattern in different tissues. Our results suggest that it is important to maintain expression of the four BnDGAT1s for maximum return on oil content.

  10. Huge Inverse Magnetization Generated by Faraday Induction in Nano-Sized Au@Ni Core@Shell Nanoparticles.

    Science.gov (United States)

    Kuo, Chen-Chen; Li, Chi-Yen; Lee, Chi-Hung; Li, Hsiao-Chi; Li, Wen-Hsien

    2015-08-25

    We report on the design and observation of huge inverse magnetizations pointing in the direction opposite to the applied magnetic field, induced in nano-sized amorphous Ni shells deposited on crystalline Au nanoparticles by turning the applied magnetic field off. The magnitude of the induced inverse magnetization is very sensitive to the field reduction rate as well as to the thermal and field processes before turning the magnetic field off, and can be as high as 54% of the magnetization prior to cutting off the applied magnetic field. Memory effect of the induced inverse magnetization is clearly revealed in the relaxation measurements. The relaxation of the inverse magnetization can be described by an exponential decay profile, with a critical exponent that can be effectively tuned by the wait time right after reaching the designated temperature and before the applied magnetic field is turned off. The key to these effects is to have the induced eddy current running beneath the amorphous Ni shells through Faraday induction.

  11. Huge Inverse Magnetization Generated by Faraday Induction in Nano-Sized Au@Ni Core@Shell Nanoparticles

    Directory of Open Access Journals (Sweden)

    Chen-Chen Kuo

    2015-08-01

    Full Text Available We report on the design and observation of huge inverse magnetizations pointing in the direction opposite to the applied magnetic field, induced in nano-sized amorphous Ni shells deposited on crystalline Au nanoparticles by turning the applied magnetic field off. The magnitude of the induced inverse magnetization is very sensitive to the field reduction rate as well as to the thermal and field processes before turning the magnetic field off, and can be as high as 54% of the magnetization prior to cutting off the applied magnetic field. Memory effect of the induced inverse magnetization is clearly revealed in the relaxation measurements. The relaxation of the inverse magnetization can be described by an exponential decay profile, with a critical exponent that can be effectively tuned by the wait time right after reaching the designated temperature and before the applied magnetic field is turned off. The key to these effects is to have the induced eddy current running beneath the amorphous Ni shells through Faraday induction.

  12. Huge Inverse Magnetization Generated by Faraday Induction in Nano-Sized Au@Ni Core@Shell Nanoparticles

    Science.gov (United States)

    Kuo, Chen-Chen; Li, Chi-Yen; Lee, Chi-Hung; Li, Hsiao-Chi; Li, Wen-Hsien

    2015-01-01

    We report on the design and observation of huge inverse magnetizations pointing in the direction opposite to the applied magnetic field, induced in nano-sized amorphous Ni shells deposited on crystalline Au nanoparticles by turning the applied magnetic field off. The magnitude of the induced inverse magnetization is very sensitive to the field reduction rate as well as to the thermal and field processes before turning the magnetic field off, and can be as high as 54% of the magnetization prior to cutting off the applied magnetic field. Memory effect of the induced inverse magnetization is clearly revealed in the relaxation measurements. The relaxation of the inverse magnetization can be described by an exponential decay profile, with a critical exponent that can be effectively tuned by the wait time right after reaching the designated temperature and before the applied magnetic field is turned off. The key to these effects is to have the induced eddy current running beneath the amorphous Ni shells through Faraday induction. PMID:26307983

  13. Huge gastric diospyrobezoars successfully treated by oral intake and endoscopic injection of Coca-Cola.

    Science.gov (United States)

    Chung, Y W; Han, D S; Park, Y K; Son, B K; Paik, C H; Jeon, Y C; Sohn, J H

    2006-07-01

    A diospyrobezoar is a type of phytobezoar that is considered to be harder than any other types of phytobezoars. Here, we describe a new treatment modality, which effectively and easily disrupted huge gastric diospyrobezoars. A 41-year-old man with a history of diabetes mellitus was admitted with lower abdominal pain and vomiting. Upper gastrointestinal endoscopy revealed three huge, round diospyrobezoars in the stomach. He was made to drink two cans of Coca-Cola every 6 h. At endoscopy the next day, the bezoars were partially dissolved and turned to be softened. We performed direct endoscopic injection of Coca-Cola into each bezoar. At repeated endoscopy the next day, the bezoars were completely dissolved.

  14. Successful Vaginal Delivery despite a Huge Ovarian Mucinous Cystadenoma Complicating Pregnancy: A Case Report

    Directory of Open Access Journals (Sweden)

    Dipak Mandi

    2013-12-01

    Full Text Available A 22-year-old patient with 9 months of amenorrhea and a huge abdominal swelling was admitted to our institution with an ultrasonography report of a multiloculated cystic space-occupying lesion, almost taking up the whole abdomen (probably of ovarian origin, along with a single live intrauterine fetus. She delivered vaginally a boy baby within 4 hours of admission without any maternal complication, but the baby had features of intrauterine growth restriction along with low birth weight. On the 8th postpartum day, the multiloculated cystic mass, which arose from the right ovary and weighed about 11 kg, was removed via laparotomy. A mucinous cystadenoma with no malignant cells in peritoneal washing was detected in histopathology examination. This report describes a rare case of a successful vaginal delivery despite a huge cystadenoma of the right ovary complicating the pregnancy.

  15. A New Pixels Flipping Method for Huge Watermarking Capacity of the Invoice Font Image

    Directory of Open Access Journals (Sweden)

    Li Li

    2014-01-01

    Full Text Available Invoice printing just has two-color printing, so invoice font image can be seen as binary image. To embed watermarks into invoice image, the pixels need to be flipped. The more huge the watermark is, the more the pixels need to be flipped. We proposed a new pixels flipping method in invoice image for huge watermarking capacity. The pixels flipping method includes one novel interpolation method for binary image, one flippable pixels evaluation mechanism, and one denoising method based on gravity center and chaos degree. The proposed interpolation method ensures that the invoice image keeps features well after scaling. The flippable pixels evaluation mechanism ensures that the pixels keep better connectivity and smoothness and the pattern has highest structural similarity after flipping. The proposed denoising method makes invoice font image smoother and fiter for human vision. Experiments show that the proposed flipping method not only keeps the invoice font structure well but also improves watermarking capacity.

  16. A new pixels flipping method for huge watermarking capacity of the invoice font image.

    Science.gov (United States)

    Li, Li; Hou, Qingzheng; Lu, Jianfeng; Xu, Qishuai; Dai, Junping; Mao, Xiaoyang; Chang, Chin-Chen

    2014-01-01

    Invoice printing just has two-color printing, so invoice font image can be seen as binary image. To embed watermarks into invoice image, the pixels need to be flipped. The more huge the watermark is, the more the pixels need to be flipped. We proposed a new pixels flipping method in invoice image for huge watermarking capacity. The pixels flipping method includes one novel interpolation method for binary image, one flippable pixels evaluation mechanism, and one denoising method based on gravity center and chaos degree. The proposed interpolation method ensures that the invoice image keeps features well after scaling. The flippable pixels evaluation mechanism ensures that the pixels keep better connectivity and smoothness and the pattern has highest structural similarity after flipping. The proposed denoising method makes invoice font image smoother and fiter for human vision. Experiments show that the proposed flipping method not only keeps the invoice font structure well but also improves watermarking capacity.

  17. Churn prediction on huge telecom data using hybrid firefly based classification

    Directory of Open Access Journals (Sweden)

    Ammar A.Q. Ahmed

    2017-11-01

    Full Text Available Churn prediction in telecom has become a major requirement due to the increase in the number of telecom providers. However due to the hugeness, sparsity and imbalanced nature of the data, churn prediction in telecom has always been a complex task. This paper presents a metaheuristic based churn prediction technique that performs churn prediction on huge telecom data. A hybridized form of Firefly algorithm is used as the classifier. It has been identified that the compute intensive component of the Firefly algorithm is the comparison block, where every firefly is compared with every other firefly to identify the one with the highest light intensity. This component is replaced by Simulated Annealing and the classification process is carried out. Experiments were conducted on the Orange dataset. It was observed that Firefly algorithm works best on churn data and the hybridized Firefly algorithm provides effective and faster results.

  18. The therapy for huge goiter together with hyperthyroidism through 131I case studies

    International Nuclear Information System (INIS)

    He Jianhua; Yu Wencai; Zeng Qingwen; Wu Congjun

    2001-01-01

    Objective: 214 cases of the treatment of huge goiter with hyperthyroidism are revised to collect clinic material for the improvement of therapy to hyperthyroidism indications through 131 I. Methods: In all of these cases, patients take a full dose of 131 I based on MC Garack's formula for one time. Results: Among them, 154 resolved, accounting for 72%, 139 of the cases were reduced to normal size, which accounted for 64.9% of the patients. Only 114 cases of patients had side-effect, and during one year 12.1% of them have symptoms of hypothyroidism. Conclusion: The statistics shows that 131 I is convenient, safe, well and with reduces suffering from treating huge goiter with hyperthyroidism

  19. Huge mucinous cystadenoma of ovary, describing a young patient: case report

    Directory of Open Access Journals (Sweden)

    Soheila Aminimoghaddam

    2017-08-01

    Conclusion: Ovarian cysts in young women who are associated with elevated levels of tumor markers and ascites require careful evaluation. Management of ovarian cysts depends on patient's age, size of the cyst, and its histopathological nature. Conservative surgery such as ovarian cystectomy or salpingo-oophorectomy is adequate in mucinous tumors of ovary. Multiple frozen sections are very important to know the malignant variation of this tumor and helps accurate patient management. Surgical expertise is required to prevent complications in huge tumors has distorted the anatomy, so gynecologic oncologist plays a prominent role in management. In this case, beside of the huge tumor and massive ascites uterine and ovaries were preserved by gynecologist oncologist and patient is well up to now.

  20. Transcatheter Closure of Bilateral Multiple Huge Pulmonary Arteriovenous Malformations with Homemade Double-Umbrella Occluders

    International Nuclear Information System (INIS)

    Zhong Hongshan; Xu Ke; Shao Haibo

    2008-01-01

    A 28-year-old man underwent successful transcatheter occlusion of three huge pulmonary arteriovenous malformations (PAVMs) using homemade double-umbrella occluders and stainless steel coils. Thoracic CT with three-dimensional reconstruction and pulmonary angiography were used for treatment planning and follow-up. The diameters of the feeding vessels were 11 mm, 13 mm, and 14 mm, respectively. This report demonstrates the novel design and utility of the double-umbrella occluder, an alternative tool for treatment of large PAVMs.

  1. On the huge Lie superalgebra of pseudo superdifferential operators and super KP-hierarchies

    International Nuclear Information System (INIS)

    Sedra, M.B.

    1995-08-01

    Lie superalgebraic methods are used to establish a connection between the huge Lie superalgebra Ξ of super (pseudo) differential operators and various super KP-hierarchies. We show in particular that Ξ splits into 5 = 2 x 2 + 1 graded algebras expected to correspond to five classes of super KP-hierarchies generalizing the well-known Manin-Radul and Figueroa O'Farrill-Ramos supersymmetric KP-hierarchies. (author). 10 refs

  2. Propranolol in Treatment of Huge and Complicated Infantile Hemangiomas in Egyptian Children

    OpenAIRE

    Hassan, Basheir A.; Shreef, Khalid S.

    2014-01-01

    Background. Infantile hemangiomas (IHs) are the most common benign tumours of infancy. Propranolol has recently been reported to be a highly effective treatment for IHs. This study aimed to evaluate the efficacy and side effects of propranolol for treatment of complicated cases of IHs. Patients and Methods. This prospective clinical study included 30 children with huge or complicated IHs; their ages ranged from 2 months to 1 year. They were treated by oral propranolol. Treatment outcomes were...

  3. A geological substantiation of the prospects for oil and gas concentrations in the Eifelian and lower Frasnian deposits and trends for prospecting and exploratory operations in the southwestern Orenburg region

    Energy Technology Data Exchange (ETDEWEB)

    Podkoiytov, N.G.; Astafyev, D.A.

    1984-01-01

    The Eifelian and lower Frasnian deposits, which have the general traits of a regional structure within the southern portion of the Urals and Volga Valley, are a unified structural-lithologic complex. The prediction of oil and gas concentrations in this complex to the south of the Orenburg region is confirmed by discovery of a number of fields (Tashlin and the Olkhov fields, etc.). The regional structure of the Eifelian and lower Frasnian complex is characterized by a D type reflecting seismic bed which coincides with the surface of this complex. To the west of the region, a Kanelik Chagansk system of flexures has been identified and to the south, localized upheavals within the Talovo Koshin swell have been identified.

  4. Less-developed countries have a huge equity in nuclear power

    International Nuclear Information System (INIS)

    Olds, F.C.

    1978-01-01

    Three-quarters of the world's people live in less-developed countries (LDCs). Few of these are energy self-sufficient, and their dependence on imported oil grows more risky as burgeoning world oil consumption seems likely to reach a practical ceiling of production long before demand is satisfied. Hence, LDCs push their nuclear power programs, and hope for strong nuclear programs in the industrialized world to ease the demand for oil. Standing against the LDCs are the international intervenors and the nuclear slowdown policy of the United States

  5. The efficacy of stereotactic body radiation therapy on huge hepatocellular carcinoma unsuitable for other local modalities

    International Nuclear Information System (INIS)

    Que, Jenny Y; Lin, Li-Ching; Lin, Kuei-Li; Lin, Chia-Hui; Lin, Yu-Wei; Yang, Ching-Chieh

    2014-01-01

    To evaluate the safety and efficacy of Cyberknife stereotactic body radiation therapy (SBRT) and its effect on survival in patients with unresectable huge hepatocellular carcinoma (HCC) unsuitable of other standard treatment option. Between 2009 and 2011, 22 patients with unresectable huge HCC (≧10 cm) were treated with SBRT. dose ranged from 26 Gy to 40 Gy in five fractions. Overall survival (OS) and disease-progression free survival (DPFS) were determined by Kaplan-Meier analysis. Tumor response and toxicities were also assessed. After a median follow-up of 11.5 month (range 2–46 months). The objective response rate was achieved in 86.3% (complete response (CR): 22.7% and partial response (PR): 63.6%). The 1-yr. local control rate was 55.56%. The 1-year OS was 50% and median survival was 11 months (range 2–46 months). In univariate analysis, Child-Pugh stage (p = 0.0056) and SBRT dose (p = 0.0017) were significant factors for survival. However, in multivariate analysis, SBRT dose (p = 0.0072) was the most significant factor, while Child-Pugh stage of borderline significance. (p = 0.0514). Acute toxicities were mild and well tolerated. This study showed that SBRT can be delivered safely to huge HCC and achieved a substantial tumor regression and survival. The results suggest this technique should be considered a salvage treatment. However, local and regional recurrence remain the major cause of failure. Further studies of combination of SBRT and other treatment modalities may be reasonable

  6. A case of huge neurofibroma expanding extra- and intracranially through the enlarged jugular foramen

    International Nuclear Information System (INIS)

    Hanakita, Junya; Imataka, Kiyoharu; Handa, Hajime

    1984-01-01

    The surgical approach to the jugular foramen has been considered to be very difficult and troublesome, because of the location in which important structures, such as the internal jugular vein, internal carotid artery and lower cranial nerves, converge in the narrow deep space. A case of huge neurofibroma, which extended from the tentorium cerebelli through the dilated jugular foramen to the level of the vertebral body of C 3 was presented. A 12-year-old girl was admitted with complaints of visual disturbance and palsy of the V-XII cranial nerves of the left side. Plain skull film showed prominent widening of the cranial sutures and enlargement of the sella turcica. Horizontal CT scan with contrast showed symmetrical ventricular dilatation and a heterogeneously enhanced mass, which was situated mainly in the left CP angle. Coronal CT scan with contrast revealed a huge mass and enlarged jugular foramen, through which the tumor extended to the level of the vertebral body of C 3 . Occlusion of the sigmoid sinus and the internal jugular vein of the left side was noticed in the vertebral angiography. Two-stage approach, the first one for removal of the intracranial tumor and the second one for extracranial tumor, was performed for its huge tumor. Several authors have reported excellent surgical approaches for the tumors situated in the jugular foramen. By our approach, modifying Gardner's original one, a wide operative field was obtained to remove the tumor around the jugular foramen with success. Our approach for the jugular foramen was described with illustrations. (author)

  7. En bloc resection of huge cemento-ossifying fibroma of mandible: avoiding lower lip split incision.

    Science.gov (United States)

    Ayub, Tahera; Katpar, Shahjahan; Shafique, Salman; Mirza, Talat

    2011-05-01

    Cemento-ossifying Fibroma (COF) is an osteogenic benign neoplasm affecting the jaws and other craniofacial bones. It commonly presents as a progressively slow growing pathology, which can sometimes attain an enormous size, causing facial deformity. A case of a huge cemento-ossifying fibroma, appearing as a mandibular dumbell tumour in a male patient is documented, which caused massive bone destruction and deformity. It was surgically removed by performing en bloc resection of mandible avoiding the splitting of lower lip incision technique, thereby maintaining his normal facial appearance.

  8. Huge residual resistivity in the quantum critical region of CeAgSb2

    International Nuclear Information System (INIS)

    Nakashima, Miho; Kirita, Shingo; Asai, Rihito; Kobayashi, Tatsuo C; Okubo, Tomoyuki; Yamada, Mineko; Thamizhavel, Arumugam; Inada, Yoshihiko; Settai, Rikio; Galatanu, Andre; Yamamoto, Etsuji; Ebihara, Takao; Onuki, Yoshichika

    2003-01-01

    We have studied the effect of pressure on the electrical resistivity of a high-quality single crystal CeAgSb 2 which has a small net ferromagnetic moment of 0.4μ B /Ce. The magnetic ordering temperature T ord = 9.7 K decreases with increasing pressure p and disappears at a critical pressure p c ≅ 3.3 GPa. The residual resistivity, which is close to zero up to 3 GPa, increases steeply above 3 GPa, reaching 55μΩ cm at p c . A huge residual resistivity is found to appear when the magnetic order disappears. (letter to the editor)

  9. Acute abdomen in early pregnancy caused by torsion of bilateral huge multiloculated ovarian cysts

    OpenAIRE

    Sathiyakala Rajendran; Suthanthira Devi

    2015-01-01

    The association of pregnancy and torsion of bilateral huge benign ovarian cyst is rare. We report a case of multigravida at 13 weeks of pregnancy presenting with acute onset of lower abdominal pain. Ultrasound revealed bilateral multiloculated ovarian cysts of size 10x10 cm on right side and 15x10cm on left side with evidence of torsion and a single live intrauterine fetus of gestational age 13 weeks 4 days. Emergency laparotomy was done with vaginal susten 200 mg as perioperative tocolysis. ...

  10. Surgical resection of a huge cemento-ossifying fibroma in skull base by intraoral approach.

    Science.gov (United States)

    Cheng, Xiao-Bing; Li, Yun-Peng; Lei, De-Lin; Li, Xiao-Dong; Tian, Lei

    2011-03-01

    Cemento-ossifying fibroma, also known as ossifying fibroma, usually occurs in the mandible and less commonly in the maxilla. The huge example in the skull base is even rare. We present a case of a huge cemento-ossifying fibroma arising below the skull base of a 30-year-old woman patient. Radiologic investigations showed a giant, lobulated, heterogeneous calcified hard tissue mass, which is well circumscribed and is a mixture of radiolucent and radiopaque, situated at the rear of the right maxilla to the middle skull base. The tumor expands into the right maxillary sinus and the orbital cavity, fusing with the right maxilla at the maxillary tuberosity and blocking the bilateral choanas, which caused marked proptosis and blurred vision. The tumor was resected successfully by intraoral approach, and pathologic examination confirmed the lesion to be a cemento-ossifying fibroma. This case demonstrates that cemento-ossifying fibroma in the maxilla, not like in the mandible, may appear more aggressive because the extensive growth is unimpeded by anatomic obstacles and that the intraoral approach can be used to excise the tumor in the skull base.

  11. Polygenetic Aspect of Unit Theory Oil Generation

    Science.gov (United States)

    Galant, Yuri

    2015-04-01

    In the framework of a unified theory Oil Generation one of important moments is the consideration of the distribution of oil in the Earth's Crust. Analysis of the distribution of oil deposits in the Earth's Crust showed that oil distributed throughout the stratigraphic section from ancient to modern sediments and from a depth of 12 kilometers to the Earth's surface. The distribution of oil almost meets all stages of metamorphism of rocks. Correlation of the section of oil distribution to genetic types of ore deposits showed that each genetic type ore deposits has its analogue oil field . So it is possible to classify oil fields on 1) endogenous: the actual magmatic, post-magmatic, contact-metasomatic (skarn), hydrothermal, exhalation, carbonatite, pegmatite, 2) exogenous: weathering, oxidation, sedimentary,3) metamorphogenic: metamorphosed, metamorphic. Model of such distribution of oil deposits can be a process of successive formation of oil deposits of mantle degassing tube. Thus oil is polygenic by way of formation of deposits, but their source is united.

  12. Oil: Economics and politics

    International Nuclear Information System (INIS)

    Ayoub, A.

    1994-01-01

    A review is presented of the evolution of the international petroleum sector since 1973 with a special emphasis on the interdependence between the economic and political factors that influence it. Two issues are focused on: the effects of the nationalization of oil companies on the sharing of oil rents and on changes in the structure of the oil market; and the determination of oil prices. Definitions are presented of oil rents, and the reasons for OPEC nationalization of oil companies are explored. The effects of nationalization on market structures, expansion of free markets, and vertical integration are discussed. The existence of an oil price floor and the reasons for such a floor are examined. It is shown that nationalization induced an internalization of rents by the producing countries, leading to the emergence of a differential rent supported by the politics of the industrialized countries. Nationalization led to the breakup of systems of vertical and horizontal integration, with replacement by a new dual structure with OPEC controlling the upstream activities of the oil sector and oil companies controlling the downstream ones. Prices move between a floor price set by the costs of substitute deposits in the U.S., while the determination of ceiling levels by OPEC rests on successive fragile compromises. Overall oil is still a strategic product, despite the existence of spot markets, forward trading options, etc. 29 refs

  13. TULSA UNIVERSITY PARAFFIN DEPOSITION PROJECTS

    Energy Technology Data Exchange (ETDEWEB)

    Cem Sarica; Michael Volk

    2004-06-01

    As oil and gas production moves to deeper and colder water, subsea multiphase production systems become critical for economic feasibility. It will also become increasingly imperative to adequately identify the conditions for paraffin precipitation and predict paraffin deposition rates to optimize the design and operation of these multi-phase production systems. Although several oil companies have paraffin deposition predictive capabilities for single-phase oil flow, these predictive capabilities are not suitable for the multiphase flow conditions encountered in most flowlines and wellbores. For deepwater applications in the Gulf of Mexico, it is likely that multiphase production streams consisting of crude oil, produced water and gas will be transported in a single multiphase pipeline to minimize capital cost and complexity at the mudline. Existing single-phase (crude oil) paraffin deposition predictive tools are clearly inadequate to accurately design these pipelines, because they do not account for the second and third phases, namely, produced water and gas. The objective of this program is to utilize the current test facilities at The University of Tulsa, as well as member company expertise, to accomplish the following: enhance our understanding of paraffin deposition in single and two-phase (gas-oil) flows; conduct focused experiments to better understand various aspects of deposition physics; and, utilize knowledge gained from experimental modeling studies to enhance the computer programs developed in the previous JIP for predicting paraffin deposition in single and two-phase flow environments. These refined computer models will then be tested against field data from member company pipelines.

  14. Between the water and the oil. The Mexican and American transfrontier deposits; Entre el agua y el aceite. Los yacimientos transfronterizos de Mexico y Estados Unidos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-15

    In the Gulf of Mexico, there are hydrocarbon deposits shared between Mexico and United States, and divided for just one imaginary line at the sea. The exploitation should be done at the same time by both countries; therefore, it is going to be necessary on the whole the creation of a development strategy, despite the fact of the big existent differences among their respective normative frameworks, institutional design and industrial practices. [Spanish] En el Golfo de Mexico, existen yacimientos de hidrocarburos que comparten Mexico y Estados Unidos, divididos solo por una linea imaginaria en el mar. La explotacion debe ser llevada al unisono por ambos paises, por lo que muy pronto deberan crear una estrategia de desarrollo conjunto, pese a las grandes diferencias entre sus respectivos marcos normativos, disenos institucionales y practicas industriales.

  15. Sleeping money: investigating the huge surpluses of social health insurance in China.

    Science.gov (United States)

    Liu, JunQiang; Chen, Tao

    2013-12-01

    The spreading of social health insurance (SHI) worldwide poses challenges for fledging public administrators. Inefficiency, misuse and even corruption threaten the stewardship of those newly established health funds. This article examines a tricky situation faced by China's largest SHI program: the basic health insurance (BHI) scheme for urban employees. BHI accumulated a 406 billion yuan surplus by 2009, although the reimbursement level was still low. Using a provincial level panel database, we find that the huge BHI surpluses are related to the (temporarily) decreasing dependency ratio, the steady growth of average wages, the extension of BHI coverage, and progress in social insurance agency building. The financial situations of local governments and risk pooling level also matter. Besides, medical savings accounts result in about one third of BHI surpluses. Although these findings are not causal, lessons drawn from this study can help to improve the governance and performance of SHI programs in developing countries.

  16. Subcortical heterotopia appearing as huge midline mass in the newborn brain.

    Science.gov (United States)

    Fukumura, Shinobu; Watanabe, Toshihide; Kimura, Sachiko; Ochi, Satoko; Yoshifuji, Kazuhisa; Tsutsumi, Hiroyuki

    2016-02-01

    We report the case of a 2-year-old boy who showed a huge midline mass in the brain at prenatal assessment. After birth, magnetic resonance imaging (MRI) revealed a conglomerate mass with an infolded microgyrus at the midline, which was suspected as a midline brain-in-brain malformation. MRI also showed incomplete cleavage of his frontal cortex and thalamus, consistent with lobar holoprosencephaly. The patient underwent an incisional biopsy of the mass on the second day of life. The mass consisted of normal central nervous tissue with gray and white matter, representing a heterotopic brain. The malformation was considered to be a subcortical heterotopia. With maturity, focal signal changes and decreased cerebral perfusion became clear on brain imaging, suggesting secondary glial degeneration. Coincident with these MRI abnormalities, the child developed psychomotor retardation and severe epilepsy focused on the side of the intracranial mass.

  17. Huge pelvic parachordoma: fine needle aspiration cytology and histological differential diagnosis

    Directory of Open Access Journals (Sweden)

    Mona A. Kandil

    2012-10-01

    Full Text Available Parachordoma is an extremely rare soft tissue tumor of unknown lineage. Parachordoma develops most often on the extremities. Only 2 cases have been reported as pelvic parachordoma. A 46-year old Egyptian woman with a huge painful pelvic mass was found to have a parachordoma with ectopic pelvic right kidney. There is only one report in the literature of fine needle aspiration cytology in this setting. The microscopic picture of parachordoma is not new to pathologists but the gross picture of this rare tumor has not previously been published; not even in the World Health Organization classification of soft tissues tumors. Diagnosis was confirmed by immuno-histochemistry. The patient is in good clinical condition without any evidence of recurrence or metastasis after 84 months of follow up.

  18. Tiny Grains Give Huge Gains: Nanocrystal–Based Signal Amplification for Biomolecule Detection

    Science.gov (United States)

    Tong, Sheng; Ren, Binbin; Zheng, Zhilan; Shen, Han; Bao, Gang

    2013-01-01

    Nanocrystals, despite their tiny sizes, contain thousands to millions of atoms. Here we show that the large number of atoms packed in each metallic nanocrystal can provide a huge gain in signal amplification for biomolecule detection. We have devised a highly sensitive, linear amplification scheme by integrating the dissolution of bound nanocrystals and metal-induced stoichiometric chromogenesis, and demonstrated that signal amplification is fully defined by the size and atom density of nanocrystals, which can be optimized through well-controlled nanocrystal synthesis. Further, the rich library of chromogenic reactions allows implementation of this scheme in various assay formats, as demonstrated by the iron oxide nanoparticle linked immunosorbent assay (ILISA) and blotting assay developed in this study. Our results indicate that, owing to the inherent simplicity, high sensitivity and repeatability, the nanocrystal based amplification scheme can significantly improve biomolecule quantification in both laboratory research and clinical diagnostics. This novel method adds a new dimension to current nanoparticle-based bioassays. PMID:23659350

  19. PRS: PERSONNEL RECOMMENDATION SYSTEM FOR HUGE DATA ANALYSIS USING PORTER STEMMER

    Directory of Open Access Journals (Sweden)

    T N Chiranjeevi

    2016-04-01

    Full Text Available Personal recommendation system is one which gives better and preferential recommendation to the users to satisfy their personalized requirements such as practical applications like Webpage Preferences, Sport Videos preferences, Stock selection based on price, TV preferences, Hotel preferences, books, Mobile phones, CDs and various other products now use recommender systems. The existing Pearson Correlation Coefficient (PCC and item-based algorithm using PCC, are called as UPCC and IPCC respectively. These systems are mainly based on only the rating services and does not consider the user personal preferences, they simply just give the result based on the ratings. As the size of data increases it will give the recommendations based on the top rated services and it will miss out most of user preferences. These are main drawbacks in the existing system which will give same results to the users based on some evaluations and rankings or rating service, they will neglect the user preferences and necessities. To address this problem we propose a new approach called, Personnel Recommendation System (PRS for huge data analysis using Porter Stemmer to solve the above challenges. In the proposed system it provides a personalized service recommendation list to the users and recommends the most useful services to the users which will increase the accuracy and efficiency in searching better services. Particularly, a set of suggestions or keywords are provided to indicate user preferences and we used Collaborative Filtering and Porter Stemmer algorithm which gives a suitable recommendations to the users. In real, the broad experiments are conducted on the huge database which is available in real world, and outcome shows that our proposed personal recommender method extensively improves the precision and efficiency of service recommender system over the KASR method. In our approach mainly consider the user preferences so it will not miss out the any of the data

  20. Nanotechnologies in oil production

    International Nuclear Information System (INIS)

    Alieva, M.K; Kazimov, F.K.; Ismailov, E.

    2010-01-01

    Extraction of remaining, laboriously developed oil reserves at the last stage of development of deposits require drastically improved methods of oil recovery. From this point of view it is more expedient to apply high-tech nanotechnologies. Application of metal nanoparticles in solutions consisting of conventional reagents (deemulgators, SAA and etc.) allows to improve their rheology considerably to increase permaibility and washing of highly viscous components from the smallest pores. Thus, nanofluids influence layer system on atomic-molecular-ionic level which will lead to a complex synergetic effect from the application of nanotechnologies in oil and gas production.

  1. Palm Oil

    Science.gov (United States)

    Palm oil is obtained from the fruit of the oil palm tree. Palm oil is used for preventing vitamin A deficiency, cancer, ... blood pressure, high cholesterol, and cyanide poisoning. Palm oil is used for weight loss and increasing the ...

  2. Diesel oil

    Science.gov (United States)

    Oil ... Diesel oil ... Diesel oil poisoning can cause symptoms in many parts of the body. EYES, EARS, NOSE, AND THROAT Loss of ... most dangerous effects of hydrocarbon (such as diesel oil) poisoning are due to inhaling the fumes. NERVOUS ...

  3. Hydrogen-terminated mesoporous silicon monoliths with huge surface area as alternative Si-based visible light-active photocatalysts

    KAUST Repository

    Li, Ting; Li, Jun; Zhang, Qiang; Blazeby, Emma; Shang, Congxiao; Xu, Hualong; Zhang, Xixiang; Chao, Yimin

    2016-01-01

    Silicon-based nanostructures and their related composites have drawn tremendous research interest in solar energy storage and conversion. Mesoporous silicon with a huge surface area of 400-900 m2 g-1 developed by electrochemical etching exhibits

  4. Oil spills

    International Nuclear Information System (INIS)

    Katsouros, M.H.

    1992-01-01

    The world annually transports 1.7 billion tons of oil by sea, and oil spills, often highly concentrated discharges, are increasing from a variety of sources. The author discusses sources of oils spills: natural; marine transportation; offshore oil production; atmospheric sources; municipal industrial wastes and runoff. Other topics include: the fate of the spilled oil; the effects of the oil; the response to oil spills; and prevention of oil spills. 30 refs., 1 fig., 4 tabs

  5. Oil Spills

    Science.gov (United States)

    ... up. How Oil Harms Animals and Plants in Marine Environments In general, oil spills can affect animals and plants in two ways: from the oil ... up. How Oil Harms Animals and Plants in Marine Environments In general, oil spills can affect animals and plants in two ways: from the oil ...

  6. The Study of the Desulfurization Process of Oil and Oil Products of "Zhanazhol" Oil Field Using the Approaches of Green Chemistry

    OpenAIRE

    Zhaksyntay K. Kairbekov; Zhannur K. Myltykbaeva; Nazym T. Smagulova; Dariya K. Kanseitova

    2015-01-01

    In this paper we studied sono catalytic oxidative desulfurization of oil and diesel fraction from “Zhanazhol” oil deposits. We have established that the combined effect of the ultrasonic field and oxidant (ozone-air mixture) in the presence of the catalyst on the oil is potentially very effective method of desulfurization of oil and oil products. This method allows increasing the degree of desulfurization of oil by 62%.

  7. Oil Origin and Age

    Directory of Open Access Journals (Sweden)

    A.A. Barenbaum

    2017-03-01

    Full Text Available The question of oil age is discussed on the basis of the biosphere concept of oil and gas formation. It considers oil and gas deposits as underground carbon traps circulating through the Earth’s surface in the three main cycles of the circulation. A theoretical model has been developed that makes it possible to explain from these positions the phenomenon of replenishment of oil and gas deposits in the process of field development. The model provides a balance between carbon flows on the ascending and descending branches of its circulation through the Earth’s surface. In this model, the ascending flow of carbon is represented by the products of subsoil degassing (СН4, СО2 and extracted by the person from the depths of oil, gas and coal. A descending flow is an organic matter and carbonates that are submerged in the subsoil in the processes of sedimentation and subduction of lithospheric plates, as well as atmospheric COsub>2, entering the Earth’s surface with meteoric waters in the process of their climatic circulation. Since the fields are filled with hydrocarbons formed in cycles of carbon with widely differing circulation times, instead of the term ‘age of oil’, it is suggested to use the terms ‘trap formation time’ and ‘hydrocarbon life time in the trap’. This approach to the question of oil age in the biosphere concept leads to a number of conclusions, from which it follows that: 1 the ‘old’ petroleum of biogenic genesis is extracted at the initial stage of the development of deposits, whereas in the depletion stage the ‘young’ hydrocarbons of abiogenic synthesis prevail; 2 the age of industrial accumulations of oil on our planet is hardly older than the Pleistocene, while gaseous, liquid and bituminous fractions of oil have different lifetimes in traps.

  8. Tsunami deposits

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    The NSC (the Nuclear Safety Commission of Japan) demand to survey on tsunami deposits by use of various technical methods (Dec. 2011), because tsunami deposits have useful information on tsunami activity, tsunami source etc. However, there are no guidelines on tsunami deposit survey in JAPAN. In order to prepare the guideline of tsunami deposits survey and evaluation and to develop the method of tsunami source estimation on the basis of tsunami deposits, JNES carried out the following issues; (1) organizing information of paleoseismological record and tsunami deposit by literature research, (2) field survey on tsunami deposit, and (3) designing the analysis code of sediment transport due to tsunami. As to (1), we organize the information gained about tsunami deposits in the database. As to (2), we consolidate methods for surveying and identifying tsunami deposits in the lake based on results of the field survey in Fukui Pref., carried out by JNES. In addition, as to (3), we design the experimental instrument for hydraulic experiment on sediment transport and sedimentation due to tsunamis. These results are reflected in the guideline on the tsunami deposits survey and evaluation. (author)

  9. Tsunami deposits

    International Nuclear Information System (INIS)

    2013-01-01

    The NSC (the Nuclear Safety Commission of Japan) demand to survey on tsunami deposits by use of various technical methods (Dec. 2011), because tsunami deposits have useful information on tsunami activity, tsunami source etc. However, there are no guidelines on tsunami deposit survey in JAPAN. In order to prepare the guideline of tsunami deposits survey and evaluation and to develop the method of tsunami source estimation on the basis of tsunami deposits, JNES carried out the following issues; (1) organizing information of paleoseismological record and tsunami deposit by literature research, (2) field survey on tsunami deposit, and (3) designing the analysis code of sediment transport due to tsunami. As to (1), we organize the information gained about tsunami deposits in the database. As to (2), we consolidate methods for surveying and identifying tsunami deposits in the lake based on results of the field survey in Fukui Pref., carried out by JNES. In addition, as to (3), we design the experimental instrument for hydraulic experiment on sediment transport and sedimentation due to tsunamis. These results are reflected in the guideline on the tsunami deposits survey and evaluation. (author)

  10. A Huge Capital Drop with Compression of Femoral Vessels Associated with Hip Osteoarthritis

    Directory of Open Access Journals (Sweden)

    Tomoya Takasago

    2015-01-01

    Full Text Available A capital drop is a type of osteophyte at the inferomedial portion of the femoral head commonly observed in hip osteoarthritis (OA, secondary to developmental dysplasia. Capital drop itself is typically asymptomatic; however, symptoms can appear secondary to impinge against the acetabulum or to irritation of the surrounding tissues, such as nerves, vessels, and tendons. We present here a case of unilateral leg edema in a patient with hip OA, caused by a huge bone mass occurring at the inferomedial portion of the femoral head that compressed the femoral vessels. We diagnosed this bone mass as a capital drop secondary to hip OA after confirming that the mass occurred at least after the age of 63 years based on a previous X-ray. We performed early resection and total hip arthroplasty since the patient’s hip pain was due to both advanced hip OA and compression of the femoral vessels; moreover, we aimed to prevent venous thrombosis secondary to vascular compression considering the advanced age and the potent risk of thrombosis in the patient. A large capital drop should be considered as a cause of vascular compression in cases of unilateral leg edema in OA patients.

  11. Crystal structure of Clostridium botulinum whole hemagglutinin reveals a huge triskelion-shaped molecular complex.

    Science.gov (United States)

    Amatsu, Sho; Sugawara, Yo; Matsumura, Takuhiro; Kitadokoro, Kengo; Fujinaga, Yukako

    2013-12-06

    Clostridium botulinum HA is a component of the large botulinum neurotoxin complex and is critical for its oral toxicity. HA plays multiple roles in toxin penetration in the gastrointestinal tract, including protection from the digestive environment, binding to the intestinal mucosal surface, and disruption of the epithelial barrier. At least two properties of HA contribute to these roles: the sugar-binding activity and the barrier-disrupting activity that depends on E-cadherin binding of HA. HA consists of three different proteins, HA1, HA2, and HA3, whose structures have been partially solved and are made up mainly of β-strands. Here, we demonstrate structural and functional reconstitution of whole HA and present the complete structure of HA of serotype B determined by x-ray crystallography at 3.5 Å resolution. This structure reveals whole HA to be a huge triskelion-shaped molecule. Our results suggest that whole HA is functionally and structurally separable into two parts: HA1, involved in recognition of cell-surface carbohydrates, and HA2-HA3, involved in paracellular barrier disruption by E-cadherin binding.

  12. Propranolol in Treatment of Huge and Complicated Infantile Hemangiomas in Egyptian Children

    Directory of Open Access Journals (Sweden)

    Basheir A. Hassan

    2014-01-01

    Full Text Available Background. Infantile hemangiomas (IHs are the most common benign tumours of infancy. Propranolol has recently been reported to be a highly effective treatment for IHs. This study aimed to evaluate the efficacy and side effects of propranolol for treatment of complicated cases of IHs. Patients and Methods. This prospective clinical study included 30 children with huge or complicated IHs; their ages ranged from 2 months to 1 year. They were treated by oral propranolol. Treatment outcomes were clinically evaluated. Results. Superficial cutaneous hemangiomas began to respond to propranolol therapy within one to two weeks after the onset of treatment. The mean treatment period that was needed for the occurrence of complete resolution was 9.4 months. Treatment with propranolol was well tolerated and had few side effects. No rebound growth of the tumors was noted when propranolol dosing stopped except in one case. Conclusion. Propranolol is a promising treatment for IHs without obvious side effects. However, further studies with longer follow-up periods are needed.

  13. Propranolol in treatment of huge and complicated infantile hemangiomas in egyptian children.

    Science.gov (United States)

    Hassan, Basheir A; Shreef, Khalid S

    2014-01-01

    Background. Infantile hemangiomas (IHs) are the most common benign tumours of infancy. Propranolol has recently been reported to be a highly effective treatment for IHs. This study aimed to evaluate the efficacy and side effects of propranolol for treatment of complicated cases of IHs. Patients and Methods. This prospective clinical study included 30 children with huge or complicated IHs; their ages ranged from 2 months to 1 year. They were treated by oral propranolol. Treatment outcomes were clinically evaluated. Results. Superficial cutaneous hemangiomas began to respond to propranolol therapy within one to two weeks after the onset of treatment. The mean treatment period that was needed for the occurrence of complete resolution was 9.4 months. Treatment with propranolol was well tolerated and had few side effects. No rebound growth of the tumors was noted when propranolol dosing stopped except in one case. Conclusion. Propranolol is a promising treatment for IHs without obvious side effects. However, further studies with longer follow-up periods are needed.

  14. Huge thermal conductivity enhancement in boron nitride – ethylene glycol nanofluids

    International Nuclear Information System (INIS)

    Żyła, Gaweł; Fal, Jacek; Traciak, Julian; Gizowska, Magdalena; Perkowski, Krzysztof

    2016-01-01

    Paper presents the results of experimental studies on thermophysical properties of boron nitride (BN) plate-like shaped particles in ethylene glycol (EG). Essentially, the studies were focused on the thermal conductivity of suspensions of these particles. Nanofluids were obtained with two-step method (by dispersing BN particles in ethylene glycol) and its’ thermal conductivity was analyzed at various mass concentrations, up to 20 wt. %. Thermal conductivity was measured in temperature range from 293.15 K to 338.15 K with 15 K step. The measurements of thermal conductivity of nanofluids were performed in the system based on a device using the transient line heat source method. Studies have shown that nanofluids’ thermal conductivity increases with increasing fraction of nanoparticles. The results of studies also presented that the thermal conductivity of nanofluids changes very slightly with the increase of temperature. - Highlights: • Huge thermal conductivity enhancement in BN-EG nanofluid was reported. • Thermal conductivity increase very slightly with increasing of the temperature. • Thermal conductivity increase linearly with volume concentration of particles.

  15. A rare life-threatening disease: unilateral kidney compressed by huge chronic spontaneous retroperitoneal hemorrhage

    Directory of Open Access Journals (Sweden)

    Lu HY

    2018-03-01

    Full Text Available Hao-Yuan Lu,1,* Wei Wei,2,* Qi-Wei Chen,1,* Qing-Gui Meng,1 Gao-Hua Hu,1 Xian-Lin Yi,1,3 Xian-Zhong Bai1 1Department of Urology, Tumor Hospital of Guangxi Medical University and Guangxi Cancer Research Institute, Nanning 530021, China; 2Department of Radiology, Tumor Hospital of Guangxi Medical University and Guangxi Cancer Research Institute, Nanning 530021,China; 3Hubei Engineering Laboratory for Synthetic Microbiology, Wuhan Institute of Biotechnology, Wuhan 430075, China *These authors contributed equally to this work Objectives: To study an uncommon life-threatening disease, spontaneous retroperitoneal and perirenal hemorrhage. Case descriptions: A 69-year-old male presented with pain in the left waist and back of 1 month duration. The renal abscess was suspected by magnetic resonance imaging before operation. The perirenal hematoma was cleaned by operation. In another case, the patient had a functional solitary left kidney compressed by a huge retroperitoneal mass and uropenia appeared. Results: The first patient died of adult respiratory distress syndrome after surgery. The second patient died of cardiac insufficiency and pulmonary embolism on the second day after evacuation of retroperitoneal hematoma. Conclusion: Conservative surgery, such as selective arterial embolization, is a reasonable approach in patients with chronic spontaneous retroperitoneal and perirenal space hemorrhage and with poor general condition. We strongly recommend drainage or interventional therapy, but not a major surgery, in patients with poor condition. Keywords: kidney, spontaneous, retroperitoneal, hemorrhage, surgery

  16. Huge thermal conductivity enhancement in boron nitride – ethylene glycol nanofluids

    Energy Technology Data Exchange (ETDEWEB)

    Żyła, Gaweł, E-mail: gzyla@prz.edu.pl [Department of Physics and Medical Engineering, Rzeszow University of Technology, Rzeszow, 35-905 (Poland); Fal, Jacek; Traciak, Julian [Department of Physics and Medical Engineering, Rzeszow University of Technology, Rzeszow, 35-905 (Poland); Gizowska, Magdalena; Perkowski, Krzysztof [Department of Nanotechnology, Institute of Ceramics and Building Materials, Warsaw, 02-676 (Poland)

    2016-09-01

    Paper presents the results of experimental studies on thermophysical properties of boron nitride (BN) plate-like shaped particles in ethylene glycol (EG). Essentially, the studies were focused on the thermal conductivity of suspensions of these particles. Nanofluids were obtained with two-step method (by dispersing BN particles in ethylene glycol) and its’ thermal conductivity was analyzed at various mass concentrations, up to 20 wt. %. Thermal conductivity was measured in temperature range from 293.15 K to 338.15 K with 15 K step. The measurements of thermal conductivity of nanofluids were performed in the system based on a device using the transient line heat source method. Studies have shown that nanofluids’ thermal conductivity increases with increasing fraction of nanoparticles. The results of studies also presented that the thermal conductivity of nanofluids changes very slightly with the increase of temperature. - Highlights: • Huge thermal conductivity enhancement in BN-EG nanofluid was reported. • Thermal conductivity increase very slightly with increasing of the temperature. • Thermal conductivity increase linearly with volume concentration of particles.

  17. Combating oil spill problem using plastic waste.

    Science.gov (United States)

    Saleem, Junaid; Ning, Chao; Barford, John; McKay, Gordon

    2015-10-01

    Thermoplastic polymers (such as polypropylene, polyethylene, polyethylene terephthalate (PET) and high density polyethylene (HDPE)) constitute 5-15% of municipal solid waste produced across the world. A huge quantity of plastic waste is disposed of each year and is mostly either discarded in landfills or incinerated. On the other hand, the usage of synthetic polymers as oil sorbents, in particular, polyolefins, including polypropylene (PP), and polyethylene (PE) are the most commonly used oil sorbent materials mainly due to their low cost. However, they possess relatively low oil absorption capacities. In this work, we provide an innovative way to produce a value-added product such as oil-sorbent film with high practical oil uptake values in terms of g/g from waste HDPE bottles for rapid oil spill remedy. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Development of a method and technology for obtaining vegetable oil from safflower seeds

    Directory of Open Access Journals (Sweden)

    S. T. Antipov

    2017-01-01

    Full Text Available The article is designed and engineered compact line for processing grain safflower, which used the equipment of the increased efficiency, implementing progressive processes with application of modern physical methods of treatment. This line includes bucket Elevator (Noria, a receiving hopper , the air-sieve separator , intermediate tank, Trier (osgoodby and qualitronic, stone-dividing machine and separator for separation of Caucalis lappula, screw conveyor, intermediate bunker, peeler, oil press machines, the device for the deposition of oil (the sump, pump, frame filter. The process of collapse in the grinding pilot plant, in which the destruction of the epithelial layer of the shell is due to the fact that the compression stress in the impact zone exceeds the limit of elastic deformation of the shell of the grain. Conducted sieve analysis, which was studied granulometric composition fed to the compression of the particles of safflower seed , in this case to characterize the granulometric composition of the raw material, consisting of particles of irregular shape, used the concept of equivalent diameter. As a result of the experiments was the dependence of the equivalent particle diameter from the diameter of the sieve. Since the degree of extraction of safflower seed are hugely influenced by the moisture source of the product, was therefore carried out experimental studies of compaction with different moisture content of the seeds , and with the addition of Luz-Ki. From the analysis of graphic dependences were established a range of optimum moisture safflower seed 8,5--10%, providing the lowest residual oil content and hence the greatest yield of oil. Also managed to significantly increase the efficiency of extraction of oil by adding safflower seed pre-milled husks, which allowed to obtain cake with a residual oil content of 12% when you multiply pre-pressing and to 6% at the final extraction

  19. Combating oil spill problem using plastic waste

    Energy Technology Data Exchange (ETDEWEB)

    Saleem, Junaid, E-mail: junaidupm@gmail.com [Department of Chemical Engineering, University of Karachi (Pakistan); Ning, Chao; Barford, John [Department of Chemical and Biomolecular Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon (Hong Kong); McKay, Gordon [Department of Chemical and Biomolecular Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon (Hong Kong); Division of Sustainable Development, College of Science, Engineering and Technology, Hamad Bin Khalifa University, Qatar Foundation, Doha (Qatar)

    2015-10-15

    Highlights: • Up-cycling one type of pollution i.e. plastic waste and successfully using it to combat the other type of pollution i.e. oil spill. • Synthesized oil sorbent that has extremely high oil uptake of 90 g/g after prolonged dripping of 1 h. • Synthesized porous oil sorbent film which not only facilitates in oil sorption but also increases the affinity between sorbent and oil by means of adhesion. - Abstract: Thermoplastic polymers (such as polypropylene, polyethylene, polyethylene terephthalate (PET) and high density polyethylene (HDPE)) constitute 5–15% of municipal solid waste produced across the world. A huge quantity of plastic waste is disposed of each year and is mostly either discarded in landfills or incinerated. On the other hand, the usage of synthetic polymers as oil sorbents, in particular, polyolefins, including polypropylene (PP), and polyethylene (PE) are the most commonly used oil sorbent materials mainly due to their low cost. However, they possess relatively low oil absorption capacities. In this work, we provide an innovative way to produce a value-added product such as oil-sorbent film with high practical oil uptake values in terms of g/g from waste HDPE bottles for rapid oil spill remedy.

  20. Combating oil spill problem using plastic waste

    International Nuclear Information System (INIS)

    Saleem, Junaid; Ning, Chao; Barford, John; McKay, Gordon

    2015-01-01

    Highlights: • Up-cycling one type of pollution i.e. plastic waste and successfully using it to combat the other type of pollution i.e. oil spill. • Synthesized oil sorbent that has extremely high oil uptake of 90 g/g after prolonged dripping of 1 h. • Synthesized porous oil sorbent film which not only facilitates in oil sorption but also increases the affinity between sorbent and oil by means of adhesion. - Abstract: Thermoplastic polymers (such as polypropylene, polyethylene, polyethylene terephthalate (PET) and high density polyethylene (HDPE)) constitute 5–15% of municipal solid waste produced across the world. A huge quantity of plastic waste is disposed of each year and is mostly either discarded in landfills or incinerated. On the other hand, the usage of synthetic polymers as oil sorbents, in particular, polyolefins, including polypropylene (PP), and polyethylene (PE) are the most commonly used oil sorbent materials mainly due to their low cost. However, they possess relatively low oil absorption capacities. In this work, we provide an innovative way to produce a value-added product such as oil-sorbent film with high practical oil uptake values in terms of g/g from waste HDPE bottles for rapid oil spill remedy

  1. Shale oil. II. Gases from oil shale

    Energy Technology Data Exchange (ETDEWEB)

    McKee, R H; Manning, P D.V.

    1927-01-01

    Oil shale (from Colorado) was pyrolyzed, and the gaseous products obtained were studied. The organic material present in oil shale contains carboxyl groups that lose carbon dioxide during pyrolysis before the formation of soluble bitumen. Nitrogen was evolved as ammonia in two stages and was not continuous. The first evolution was from loosely combined nitrogen structures, whereas the second was from more stable forms. No hydrocarbons were present as such in the kerogen. The gaseous products from oil-shale pyrolysis were similar to those obtained by distillation of colophony, amber, coal, and wood. This places the kerogen of the oil shale in the same series of carbonaceous substances as those from which coals are formed. Kerogen appeared to be decomposed in three steps; namely, to insoluble bitumen, to soluble bitumen, and to oil (gas evolution accompanied each step). Its low solubility and the character of its pyrolytic gas indicated that kerogen is largely a resinous residue from vegetation of the past era and may have been formed by the tranportation of coal-forming organic debris to inland salty lakes or carried to the sea by clay-laden waters. The salt water and the natural settling action precipitated the clay and organic matter in an almost homogeneous deposit. Oil shales have existed to the present time because they have not been subjected to high pressures or elevated temperatures that would have changed them to petroleum.

  2. Purifying oils, cracking oils, catalysts. [British Patent

    Energy Technology Data Exchange (ETDEWEB)

    1936-02-05

    Hydrocarbon oils are refined by treating while substantially in the liquid phase between 200/sup 0/ and 400/sup 0/C with a phosphoric acid catalyst deposited on metallurgical coke, a suitable blast furnace slag, silica gel or other carrier with similar properties, until the objectionable components are converted into innocuous substances by polymerization cracking, isomerization and/or alkylation. By this treatment the bromine number is reduced, the end-point of the A.S.T.M. distillation is increased, the octane number is raised, mercaptans are converted to hydrogen sulphide and olefines, thioethers and thiophenes are converted to mereaptans, and the initial boiling point is lowered. The process is applicable to gasoline, cracked distillate, kerosine and lubricating oil, obtained by distilling or cracking petroleum, shale and hydrogenated oils; and is particularly applicable for stabilizing cracked distillates.

  3. The end of cheap oil

    International Nuclear Information System (INIS)

    Zagar, J.J.; Campbell, C.J.

    1999-01-01

    Easy to find 'conventional' oil in huge quantities has fueled and satisfied the World's thirst for energy this century. About 95% of all oil produced-and 90% of today's production---comes from this group of hydrocarbons. But the coming century of the new millennium will see the exit of conventional oil as a major player on the World's energy stage. Already, outside the Middle East, conventional oil production is on the decline. And the Middle East with its vast reservoirs of oil will soon reach the mid-point of depletion and begin its irreversible decline. Currently, one barrel of oil is being found for every four barrels that are produced. The Middle East now supplies 30% of the World's conventional oil production and that trend is rising because, unlike in the 1970s, no new major provinces, save perhaps the Caspian, are there to deliver flush production. The stage is now set for another 'energy crisis' starting with higher prices from Middle East control and followed by the onset of physical shortage around 2010. We face something new to human experience. (author)

  4. Exogenous deposits

    International Nuclear Information System (INIS)

    Khasanov, A.Kh.

    1988-01-01

    Exogenous deposits forming as a result of complex exogenous processes, passed under the influence of outside forces on the Earth surface. To them relate physical and chemical weathering, decomposition and decay of mineral masses, redistribution and transportation of material, forming and deposit of new minerals and ores steady on the earth surface conditions

  5. Deposition and diagenesis of the Hibernia member, Jeanne d'Arc Basin, offshore Newfoundland

    Energy Technology Data Exchange (ETDEWEB)

    Fitzgerald, C E

    1987-01-01

    The Jeanne d'Arc Basin was formed during Late Triassic to Early Cretaceous time by two episodes of rifting that caused repeated movement on one set of basin-forming faults. This resulted in up to 14 km of sediments, some of which contain huge reserves of hydrocarbons. The Hibernia member, the subject of this thesis, is a sandstone dominated zone within this basin-fill that contains a high proportion of the discovered hydrocarbons. Deposition of the Hibernia member is a result of two simultaneous and related events during Tithonian to Berriasian time: deep erosion of upthrown sides of the fault blocks, and a global eustatic rise of sea level. The provenance and depositional environment are interpreted from the examination of cores, cuttings, microfossils, and thin sections. The siliciclastics were derived from a southern source of sediments and sedimentary rocks that had an original metamorphic origin. They were deposited in a non-marine to brackish water environment of channels and associated floodplains in an anastomosed fluvial system. Rates of sedimentation and subsidence were high, and coupled with a contemporaneous eustatic sea level rise resulted in rapid aggradation and a thick sequence. The center of the basin currently has the highest geothermal gradient and thinnest oil window. Burial and thermal history curves show that the source rocks reached maturity first at the Ben Nevis well; early-formed hydrocarbons may have been lost during tectonic movements in Albian time. The source rocks underlying the Hibernia field are presently at peak oil-generating capability. Organic acids formed during the maturation of organic matter have produced excellent secondary porosity in the sandstones of the Hibernia field. However, at Ben Nevis, subsequent thermal degradation of carboxylic acids allowed late-stage cementation by ferroan calcite cement, destroying the reservoir porosity. 63 refs., 79 figs., 1 tab

  6. Responsible management of peatlands in Canada, from peat industry to oil sands

    Science.gov (United States)

    Rochefort, Line

    2013-04-01

    Canada harbors one third of the peat resources of the world. Peat is an accumulated organic matter composed of dead and partly decomposed plant material, forming huge deposit through time in wetlands like peatlands and boreal coniferous swamps. Peat is a valuable resource as a growing media and soil amendments, an eco-friendly absorbent, also used as biofilters, for body care and for wastewater treatment. Peatlands also offer valuable ecological services : for example, they are the most efficient terrestrial ecosystem to store carbon on a long-term basis. Their ability to "cool off" the planet warrants a good look at their management. The horticultural peat industry of Canada has invested 22 years in R&D in habitat restoration and is now a strong leader in managing industrial peatlands in a sustainable way. The oil sand industry, which is strongly impacting the wetland landscapes of northern Canada, does realize that it has to reduce its ecological footprint, which is heavily criticized around the world. Decommissioned open mines near Fort McMurray have already begun recreating peatland ecosystems, and some restoration attempts of former oil pads are underway in the Peace River region. But the restoration of the largely disturbed wetland landscape of the oil sands is commanding innovative solutions.

  7. Islamic versus conventional stock market and its co-movement with crude oil: a wavelet analysis

    OpenAIRE

    Kamarudin, Eka Azrin; Masih, Mansur

    2015-01-01

    Crude oil market plays an important role in economic development and its price changes give huge impact to the financial markets. In this paper, the relationships between crude oil and stock markets are examined. This study has selected Malaysian Islamic and conventional stock markets as a case study. Financialisation of crude oil and its frequent inclusion into investment portfolios warrant an analysis of the relationship between crude oil and stock market indices at various time scales or i...

  8. Oil Spills

    Science.gov (United States)

    Oil spills often happen because of accidents, when people make mistakes or equipment breaks down. Other causes include natural disasters or deliberate acts. Oil spills have major environmental and economic effects. Oil ...

  9. Solid Organic Deposition During Gas Injection Studies

    DEFF Research Database (Denmark)

    Dandekar, Abhijit Y.; Andersen, Simon Ivar; Stenby, Erling Halfdan

    2000-01-01

    Recently a series of first contact miscibility (swelling) experiments have been performed on undersaturated light and heavy oils using LPG rich and methane rich injection gases, in which solid organic deposition was observed. A compositional gradient in the oils during the gas injection process....... The asphaltene content of the different oil samples were determined by the TP 143 method. The standard asphaltenes and the solid organic deposit recovered from the swelling tests were analyzed using FTIR, HPLC-SEC and H-1 NMR. The aim of these analyses is to reveal the molecular nature of the deposits formed...... during the gas injection process in comparison with the standard asphaltenes in order to understand the mechanisms involved in asphaltene deposition....

  10. Future role of Gulf oil in world energy demand

    International Nuclear Information System (INIS)

    Eltony, M.N.

    1998-01-01

    The view that there will be a growing dependence on oil from the Gulf countries is shared by a great number of oil market analysts. This view is based on the fact that Gulf countries dominate the global oil reserves. Energy analyst argue that as the world demand for oil continues to grow driven largely by the growth in developing countries' consumption coupled with constrained non-OPEC supply, the end result will be that the call on Gulf oil will grow substantially. In summary, this paper has challenged the view of growing dependence on oil from the Gulf using available information in conjunction with reasonable and fairly plausible arguments. The aim was to point out to the GCC member counties the danger of relying on these views in shaping their economic policies and in setting their oil market strategies. They may run the ultimate risk of being left with huge oil reserves that no one wants. (orig.)

  11. Unconventional Liquids, Peak Oil and Climate Change

    Science.gov (United States)

    Hughes, J. D.

    2015-12-01

    Oil is the largest source of primary energy in the world, at 32% of 2014 consumption. Forecasts by the International Energy Agency suggest oil will continue to provide the largest share of global energy through 2040, even with new policies to mitigate greenhouse gas emissions. The IPCC's Representative Concentration Pathway (RCP) scenarios indicate that between 1.5 and 3.8 trillion barrels of oil will be burnt between 2015 and 2100. Various sources suggest that the world has 5 to 6 trillion barrels of remaining recoverable oil, more than half of which are in low grade deposits. Although oil sands and extra heavy oil are claimed to hold 1.5 trillion barrels, assessments of major deposits in the Canadian oil sands and the Venezuela Orinoco Belt, which hold the bulk of these resources, total less than 500 billion barrels of recoverable oil. Kerogen oil (oil shale), which has never been produced in anything but miniscule volumes, comprises an additional trillion barrels of these estimates. These unconventional deposits are very different from the conventional oil of the past as: - they are rate constrained, as they require massive upfront capital investments and lengthy construction periods, and therefore cannot be scaled up quickly in response to declines in conventional production. - they are expensive, both in terms of cost per barrel and the large energy inputs required for production. The best in situ oil sands deposits may yield an energy return of 3:1 and kerogen oil even less if it ever becomes commercially viable. This compares to 10:1 or more for conventional oil. Shale oil (light tight oil), may yield another 300 billion barrels worldwide, but suffers from high decline rates, expensive wells and limited availability of high quality deposits. The most productive and economically viable portions of these unconventional deposits tend to be exploited first, leaving the less productive, higher cost oil for later. As a result, increasing global oil consumption

  12. Identification of vegetable oil botanical speciation in refined vegetable oil blends using an innovative combination of chromatographic and spectroscopic techniques.

    Science.gov (United States)

    Osorio, Maria Teresa; Haughey, Simon A; Elliott, Christopher T; Koidis, Anastasios

    2015-12-15

    European Regulation 1169/2011 requires producers of foods that contain refined vegetable oils to label the oil types. A novel rapid and staged methodology has been developed for the first time to identify common oil species in oil blends. The qualitative method consists of a combination of a Fourier Transform Infrared (FTIR) spectroscopy to profile the oils and fatty acid chromatographic analysis to confirm the composition of the oils when required. Calibration models and specific classification criteria were developed and all data were fused into a simple decision-making system. The single lab validation of the method demonstrated the very good performance (96% correct classification, 100% specificity, 4% false positive rate). Only a small fraction of the samples needed to be confirmed with the majority of oils identified rapidly using only the spectroscopic procedure. The results demonstrate the huge potential of the methodology for a wide range of oil authenticity work. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Climate change adaptation accounting for huge uncertainties in future projections - the case of urban drainage

    Science.gov (United States)

    Willems, Patrick

    2015-04-01

    Hydrological design parameters, which are currently used in the guidelines for the design of urban drainage systems (Willems et al., 2013) have been revised, taking the Flanders region of Belgium as case study. The revision involved extrapolation of the design rainfall statistics, taking into account the current knowledge on future climate change trends till 2100. Uncertainties in these trend projections have been assessed after statistically analysing and downscaling by a quantile perturbation tool based on a broad ensemble set of climate model simulation results (44 regional + 69 global control-scenario climate model run combinations for different greenhouse gas scenarios). The impact results of the climate scenarios were investigated as changes to rainfall intensity-duration-frequency (IDF) curves. Thereafter, the climate scenarios and related changes in rainfall statistics were transferred to changes in flood frequencies of sewer systems and overflow frequencies of storage facilities. This has been done based on conceptual urban drainage models. Also the change in storage capacity required to exceed a given overflow return period, has been calculated for a range of return periods and infiltration or throughflow rates. These results were used on the basis of the revision of the hydraulic design rules of urban drainage systems. One of the major challenges while formulating these policy guidelines was the consideration of the huge uncertainties in the future climate change projections and impact assessments; see also the difficulties and pitfalls reported by the IWA/IAHR Joint Committee on Urban Drainage - Working group on urban rainfall (Willems et al., 2012). We made use of the risk concept, and found it a very useful approach to deal with the high uncertainties. It involves an impact study of the different climate projections, or - for practical reasons - a reduced set of climate scenarios tailored for the specific type of impact considered (urban floods in our

  14. Shale oil. I. Genesis of oil shales and its relation to petroleum and other fuels

    Energy Technology Data Exchange (ETDEWEB)

    McKee, R H; Manning, P D.V.

    1927-01-01

    Oil-shale kerogen originated from resinous vegetation residues of past eras, whereas well petroleum was formed from oil shales by pressure and mild heat. Petroleum migrated to its present reservoir from neighboring oil-shale deposits, leaving a residue of black bituminous shales. The high carbon dioxide content of gases present in petroleum wells originated from kerogen, as it gives off carbon dioxide gas before producing soluble oil or bitumen.

  15. Oil risk in oil stocks

    NARCIS (Netherlands)

    Scholtens, Bert; Wang, L

    2008-01-01

    We assess the oil price sensitivities and oil risk premiums of NYSE listed oil & gas firms' returns by using a two-step regression analysis under two different arbitrage pricing models. Thus, we apply the Fama and French (1992) factor returns in a study of oil stocks. In all, we find that the return

  16. Automatic Data Collection Design for Real-time Detection of Oil

    African Journals Online (AJOL)

    ES Obe

    Niger Delta region in Nigeria where crude oil is produced both on-shored and off- ... National Emergency Management Agency (NEMA) and involves huge ... mangrove, thick forest and off-shore areas of the Nation offers the much ... oil have been spilled into the environment ... linking some 275 flow stations to various.

  17. Reconstruction of juxta-articular huge defects of distal femur with vascularized fibular bone graft and Ilizarov's distraction osteogenesis.

    Science.gov (United States)

    Lai, Davy; Chen, Chuan-Mu; Chiu, Fang-Yao; Chang, Ming-Chau; Chen, Tain-Hsiung

    2007-01-01

    We evaluate the effect of reconstructing huge defects (mean, 15.8 cm) of the distal femur with Ilizarov's distraction osteogenesis and free twin-barreled vascularized fibular bone graft (TVFG). We retrospectively reviewed a consecutive series of five patients who had cases of distal femoral fractures with huge defects and infection that were treated by the Ilizarov's distraction osteogenesis. After radical debridement, two of the five cases had free TVFG and monolocal distraction osteogenesis, and another two cases had multilocal distraction osteogenesis with knee fusion because of loss of the joint congruity. The other case with floating knee injury had bilocal distraction osteogenesis and a preserved knee joint. The mean defect of distal femur was 15.8 cm (range, 14-18 cm) in length. The mean length of distraction osteogenesis by Ilizarov's apparatus was 8.2 cm. The mean length of TVFG was 8 cm. The average duration from application of Ilizarov's apparatus to achievement of bony union was 10.2 months (range, 8-13 months). At the end of the follow-up, ranges of motion of three knees were 0 to 45 degrees, 0 to 60 degrees, and 0 to 90 degrees. Two cases had knee arthrodesis with bony fusion because of loss of the joint congruity. There were no leg length discrepancies in all five patients. In addition, three patients had pin tract infections and one case had a 10 degree varus deformity of the femur. Juxta-articular huge defect (>10 cm) of distal femur remains a challenge to orthopedic surgeons. Ilizarov's technique provides the capability to maintain stability, eradicate infection, restore leg length, and to perform adjuvant reconstructive procedure easily. In this study, we found that combining Ilizarov's distraction osteogenesis with TVFG results in improved patient outcome for patients with injuries such as supracondylar or intercondylar infected fractures or nonunion of distal femur with huge bone defect.

  18. Huge Left Ventricular Thrombus and Apical Ballooning associated with Recurrent Massive Strokes in a Septic Shock Patient

    Directory of Open Access Journals (Sweden)

    Hyun-Jung Lee

    2016-02-01

    Full Text Available The most feared complication of left ventricular thrombus (LVT is the occurrence of systemic thromboembolic events, especially in the brain. Herein, we report a patient with severe sepsis who suffered recurrent devastating embolic stroke. Transthoracic echocardiography revealed apical ballooning of the left ventricle with a huge LVT, which had not been observed in chest computed tomography before the stroke. This case emphasizes the importance of serial cardiac evaluation in patients with stroke and severe medical illness.

  19. Hypointensity on postcontrast MR imaging from compression of the sacral promontory in enlarged uterus with huge leiomyoma and adenomyosis

    International Nuclear Information System (INIS)

    Uotani, Kensuke; Monzawa, Shuichi; Adachi, Shuji; Takemori, Masayuki; Kaji, Yasushi; Sugimura, Kazuro

    2007-01-01

    In patients with huge leiomyoma and with adenomyosis of the uterus, a peculiar area of hypointensity was occasionally observed on postcontrast magnetic resonance (MR) imaging in the dorsal portion of the enlarged uterus near the sacral promontory. We describe the imaging characteristics of these MR findings and correlate them with histopathological findings to examine whether the areas represent specific pathological changes. Ten patients with huge leiomyomas and two with huge adenomyotic lesions whose imaging revealed the hypointensity were enrolled. All had enlarged uteri that extended beyond the sacral promontory. MR findings of the hypointense areas were evaluated and correlated with histopathological findings in 5 patients with leiomyoma and two with adenomyosis who had hysterectomy. The ten patients with leiomyoma showed flare-shaped hypointensity arising from the dorsal surface of the uterine body that extended deep into the tumor. The base of the hypointense areas was narrow in 5 patients with intramural leiomyoma and broad in five with subserosal leiomyoma. Two patients with adenomyosis showed nodular-shaped areas of hypointensity in front of the sacral promontory. Precontrast T 1 - and T 2 -weighted MR images showed no signal abnormalities in the portions corresponding to the hypointensity in any of the 12 patients. Pathological examinations showed no specific findings in the portions corresponding to the hypointensity in the 7 patients who had hysterectomy. The areas of hypointensity may represent functional changes, such as decreased localized blood flow caused by compression of the sacral promontory. (author)

  20. The causes and the nursing interventions of the complications due to repeated embolization therapy for huge cerebral arteriovenous malformations

    International Nuclear Information System (INIS)

    Sun Lingfang; Sun Ge

    2010-01-01

    Objective: To investigate the causes of the complications occurred after repeated embolization therapy for huge cerebral arteriovenous malformations and to discuss their nursing interventions. Methods: A total of 54 embolization procedures were performed in 17 patients with huge cerebral arteriovenous malformations. The clinical data were retrospectively analyzed. The causes of complications were carefully examined and the preventive measures were discussed. The prompt and necessary nursing interventions were formulated in order to prevent the complications or serious consequences. Results: Among the total 17 patients, one patient gave up the treatment because of the cerebral hemorrhage which occurred two months after receiving 3 times of embolization therapy. One patient experienced cerebral vascular spasm during the procedure, which was relieved after antispasmodic medication and no neurological deficit was left behind. Two patients developed transient dizziness and headache, which were alleviated spontaneously. One patient presented with nervousness, fear and irritability, which made him hard to cooperate with the operation and the basis intravenous anesthesia was employed. No complications occurred in the remaining cases. Conclusion: The predictive nursing interventions for the prevention of complications are very important for obtaining a successful repeated embolization therapy for huge cerebral arteriovenous malformations, which will ensure that the patients can get the best treatment and the complications can be avoided. (authors)

  1. [Radical Resection of Huge Gastrointestinal Stromal Tumor of the Stomach Following Neoadjuvant Chemotherapy with lmatinib - ACase Report].

    Science.gov (United States)

    Hiraki, Yoko; Kato, Hiroaki; Shiraishi, Osamu; Tanaka, Yumiko; Iwama, Mitsuru; Yasuda, Atsushi; Shinkai, Masayuki; Kimura, Yutaka; Imano, Motohiro; Imamoto, Haruhiko; Yasuda, Takushi

    2017-11-01

    The usefulness and safety of imatinibfor neoadjuvant chemotherapy for resectable gastrointestinal stromal tumor(GIST) has not been established. We reported a case of a huge GIST of the stomach that was safely resected following preoperative imatinibtherapy. A 69-year-old man was hospitalized with abdominal fullness which increased rapidly from a month ago. A CT scan showed a huge tumor containing solid and cystic component which was accompanied by an extra-wall nodule. The tumor was strongly suspected to be originated from the stomach and EUS-FNA revealed GIST. We diagnosed GIST of the stomach and initiated preoperative adjuvant chemotherapy with imatinib because there was a risk for the break of tumor capsule and composite resection of the other organs without prior chemotherapy. After the administration of imatinib4 00 mg/day for 6months, the solid component was decreased in size and its' activity by PET-CT had declined, but the size of the cystic component was not changed and the patient's complaint of fullness was not reduced. Then, after a week cessation of imatinib, we performed surgical removal of the tumor with partial gastrectomy without surgical complication during and after the operation. Imatinibwas resumed 2 weeks later postoperatively and 1 year and 8 months has passed since the operation without recurrence. Neoadjuvant chemotherapy with imatinibhas the potential to become an important therapeutic option for the treatment of huge GISTs.

  2. Preliminary fingerprinting analysis of Alberta oil sands and related petroleum products

    International Nuclear Information System (INIS)

    Yang, C.; Wang, Z.D.; Hollebone, B.; Brown, C.E.; Yang, Z.Y.; Landriault, M.; Fieldhouse, B.

    2009-01-01

    This paper reported on a study that presented a preliminary quantitative chemical characterization of Alberta oil sands and many other related Alberta oils such as oil sand bitumen, Cold Lake bitumen, Albian heavy synthetic crude, and Alberta Mixed sweet blend. The rapid increase in production of the Alberta oil sands has resulted in unprecedented environmental concern. The mining, extraction and production of oil sands such resulted in huge consumption of water resources, huge emission of greenhouse gas and large number of tailings ponds. In addition, accidental spills in the transportation and usage of oil sands will potentially cause considerable impact on the environment. It is therefore essential to have the ability to characterize Alberta oil sands and their oil products. The specific chemical properties of the oil sands bitumen must be known. Therefore, this study collected quantitative data on the concentration and distribution profiles of target compounds in Alberta oil sands and its petroleum products. The chemical fingerprints of 5 Alberta oil sands and their related petroleum products were studied using gas chromatography/flame ionization detection (GC/FID) and gas chromatography/mass spectrometry (GC/MS). The characterized hydrocarbons were n-alkanes; target alkylated PAHs and other EPA priority PAHs; biomarker terpanes and steranes; and bicyclic sesquiterpanes. The information acquired during this study will provide the basis for oil-oil correlation and differentiation in future environmental applications relevant to oil sands. 24 refs., 6 tabs., 4 figs.

  3. The Fall of Oil Prices and the Effects on Biofuels.

    Science.gov (United States)

    Reboredo, Fernando H; Lidon, Fernando; Pessoa, Fernanda; Ramalho, José C

    2016-01-01

    This analysis is focused on the effect of the abrupt decline of oil prices on biofuels, particularly second-generation ethanol. The efforts to decrease the production costs of biofuels, especially cellulosic ethanol (CE), will be greatly threatened if current oil prices remain low, especially since production is not slowing. Only huge state subsidies could alleviate this threat, but the challenge is to persuade citizens that this sacrifice is worthwhile. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Structural characterization of MAPLE deposited lipase biofilm

    Energy Technology Data Exchange (ETDEWEB)

    Aronne, Antonio [Department of Chemical Engineering, Materials and Industrial Production, Università degli Studi di Napoli Federico II, Piazzale V. Tecchio 80, 80125 Napoli (Italy); Ausanio, Giovanni; Bloisi, Francesco [CNR-SPIN and Department of Physics, Università degli Studi di Napoli Federico II, Piazzale V. Tecchio 80, 80125 Napoli (Italy); Calabria, Raffaela [Istituto Motori-CNR, via G. Marconi 8, 80125 Napoli (Italy); Califano, Valeria, E-mail: v.califano@im.cnr.it [Istituto Motori-CNR, via G. Marconi 8, 80125 Napoli (Italy); Fanelli, Esther [Department of Chemical Engineering, Materials and Industrial Production, Università degli Studi di Napoli Federico II, Piazzale V. Tecchio 80, 80125 Napoli (Italy); Massoli, Patrizio [Istituto Motori-CNR, via G. Marconi 8, 80125 Napoli (Italy); Vicari, Luciano R.M. [CNR-SPIN and Department of Physics, Università degli Studi di Napoli Federico II, Piazzale V. Tecchio 80, 80125 Napoli (Italy)

    2014-11-30

    Highlights: • Lipase from Candida Rugosa was deposited by Matrix Assisted Pulsed Laser Evaporation (MAPLE) on KBr pellets, mica and glass substrate. • The deposited film was characterized morphologically and structurally by optical microscopy, SEM and FTIR analysis. • Results of characterization underlined a phenomenon of aggregation taking place. • The aggregation phenomenon was reversible since lipase showed activity in the transesterification reaction between soybean oil and isopropyl alcohol once detached from the substrate. - Abstract: Lipases (triacylglycerol ester hydrolases) are enzymes used in several industrial applications. Enzymes immobilization can be used to address key issues limiting widespread application at industrial level. Immobilization efficiency is related to the ability to preserve the native conformation of the enzyme. MAPLE (Matrix Assisted Pulsed Laser Evaporation) technique, a laser deposition procedure for treating organic/polymeric/biomaterials, was applied for the deposition of lipase enzyme in an ice matrix, using near infrared laser radiation. Microscopy analysis showed that the deposition occurred in micrometric and submicrometric clusters with a wide size distribution. AFM imaging showed that inter-cluster regions are uniformly covered with smaller aggregates of nanometric size. Fourier transform infrared spectroscopy was used for both recognizing the deposited material and analyzing its secondary structure. Results showed that the protein underwent reversible self-association during the deposition process. Actually, preliminary tests of MAPLE deposited lipase used for soybean oil transesterification with isopropyl alcohol followed by gas chromatography–mass spectrometry gave results consistent with undamaged deposition of lipase.

  5. Tariff Impact on the Domestic Price of Vegetable Oil in Iran and the Associated Issues

    Directory of Open Access Journals (Sweden)

    omid gilanpour

    2015-05-01

    Full Text Available This study uses vector error correction model to examine the effects of oilseeds, crude oil and vegetable oil tariffs on vegetable oil consumer price. Monthly data sets for the years 2004-2013 and VAR and VECM models were applied for this study. Research findings indicates only a long term equilibrium relation between the study variables .The effect of vegetable oil tariffs on consumer and producer price index are 0.4 and 0.07, respectively. Furthermore, one percent increase in the oil seeds and crude oil tariff, will increase consumer prices by 2.35, 0.19percent. The huge gap between the impacts of the two tariffs –e.g. oilseeds and crude oil tariffs- on consumer price shows that oil industries work with low efficiency. This practically doubles the impact of tariff on consumers. Accordingly, structural reform in the oil industry can develop oil production and prevent additional burden upon the consumer price.

  6. Principles of heavy oil recovery

    Energy Technology Data Exchange (ETDEWEB)

    Szasz, S.E.; Thomas, G.W.

    1965-10-01

    Rising exploration costs have prompted greater interest in the large known deposits of heavy oil in North America. Because of high oil viscosities in such reservoirs, recoveries are poor, fluid drives are inefficient and production rates are uneconomical. Viscosity reduction can best be accomplished by heating the reservoir. The basic aspects of reservoir heating are reviewed and those processes which are of practical importance in heavy oil reservoirs are discussed. Wellbore heating frequently can be applied to heavy oil reservoirs to increase production rates. In hot waterflooding, the water requirements are much higher than an ordinary waterflood. Steam floods are more attractive, but operating costs are generally high. Conduction heating processes appear most promising. Among these is included the cyclic steam-soak process. A simple method is presented for estimating the performance from the first cycle of steam injection into the formation, assuming gravity as the only driving energy. An example calculation for a typical heavy oil reservoir is given. (26 refs.)

  7. Lavender oil

    Science.gov (United States)

    Lavender oil is an oil made from the flowers of lavender plants. Lavender poisoning can occur when ... further instructions. This is a free and confidential service. All local poison control centers in the United ...

  8. Petroleum Oils

    Science.gov (United States)

    Different types of crude oil and refined product, of all different chemical compositions, have distinct physical properties. These properties affect the way oil spreads and breaks down, its hazard to marine and human life, and the likelihood of threat.

  9. Rosneftegazstroy - Russia's premier oil and gas contractor

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    This special Petroleum Economist Sponsored Supplement looks at the present condition and future prospects of the Russian oil and gas industry. Russia's chief oil and gas contractor, Rosneftegazstroy, a joint stock company formed in 1991, took over from the former Soviet Union's Ministry of Oil and Gas Construction and from Neftegazstroy, the State concern. Responsible for the exploration and exploitation of the country's huge oil and gas reserves, Rosneftegazstroy has a mammoth task ahead to modernize and create an adequate infrastructure for its new commercial basis. Its foreign investment projects are described and plans for rebuilding and new developments are discussed. Russia's fuel and energy industries now show clear signs of increasing activity, amid a backdrop of falling production overall. (UK)

  10. Studies on marine oil spills and their ecological damage

    Science.gov (United States)

    Mei, Hong; Yin, Yanjie

    2009-09-01

    The sources of marine oil spills are mainly from accidents of marine oil tankers or freighters, marine oil-drilling platforms, marine oil pipelines, marine oilfields, terrestrial pollution, oil-bearing atmosphere, and offshore oil production equipment. It is concluded upon analysis that there are two main reasons for marine oil spills: (I) The motive for huge economic benefits of oil industry owners and oil shipping agents far surpasses their sense of ecological risks. (II) Marine ecological safety has not become the main concern of national security. Oil spills are disasters because humans spare no efforts to get economic benefits from oil. The present paper draws another conclusion that marine ecological damage caused by oil spills can be roughly divided into two categories: damage to marine resource value (direct value) and damage to marine ecosystem service value (indirect value). Marine oil spills cause damage to marine biological, fishery, seawater, tourism and mineral resources to various extents, which contributes to the lower quality and value of marine resources.

  11. Oil biodegradation

    NARCIS (Netherlands)

    Rahsepar, Shokouhalsadat; Langenhoff, Alette A.M.; Smit, Martijn P.J.; Eenennaam, van Justine S.; Murk, Tinka; Rijnaarts, Huub H.M.

    2017-01-01

    During the Deepwater Horizon (DwH) oil spill, interactions between oil, clay particles and marine snow lead to the formation of aggregates. Interactions between these components play an important, but yet not well understood, role in biodegradation of oil in the ocean water. The aim of this study

  12. Effect of asphaltenes on crude oil wax crystallization

    DEFF Research Database (Denmark)

    Kriz, Pavel; Andersen, Simon Ivar

    2005-01-01

    The paper summarizes the experimental work done on asphaltene influenced wax crystallization. Three different asphaltenes (from stable oil, instable oil, and deposit) were mixed at several concentrations or dispersions into the waxy crude oil. These blends were evaluated by viscometry and yield s...

  13. Huge Varicose Inferior Mesenteric Vein: an Unanticipated 99mTc-labeled Red Blood Cell Scintigraphy Finding

    International Nuclear Information System (INIS)

    Hoseinzadeh, Samaneh; Shafiei, Babak; Salehian, Mohamadtaghi; Neshandar Asli, Isa; Ghodoosi, Iraj

    2010-01-01

    Ectopic varices (EcV) are enlarged portosystemic venous collaterals, which usually develop secondary to portal hypertension (PHT). Mesocaval collateral vessels are unusual pathways to decompress the portal system. Here we report the case of a huge varicose inferior mesenteric vein (IMV) that drained into peri rectal collateral veins, demonstrated by 99m Tc-labeled red blood cell (RBC) scintigraphy performed for lower gastrointestinal (GI) bleeding in a 14-year-old girl. This case illustrates the crucial role of 99m Tc-labeled RBC scintigraphy for the diagnosis of rare ectopic lower GI varices.

  14. Huge Varicose Inferior Mesenteric Vein: an Unanticipated {sup 99m}Tc-labeled Red Blood Cell Scintigraphy Finding

    Energy Technology Data Exchange (ETDEWEB)

    Hoseinzadeh, Samaneh; Shafiei, Babak; Salehian, Mohamadtaghi; Neshandar Asli, Isa; Ghodoosi, Iraj [Shaheed Beheshti Medical University, Tehran (Iran, Islamic Republic of)

    2010-09-15

    Ectopic varices (EcV) are enlarged portosystemic venous collaterals, which usually develop secondary to portal hypertension (PHT). Mesocaval collateral vessels are unusual pathways to decompress the portal system. Here we report the case of a huge varicose inferior mesenteric vein (IMV) that drained into peri rectal collateral veins, demonstrated by {sup 99m}Tc-labeled red blood cell (RBC) scintigraphy performed for lower gastrointestinal (GI) bleeding in a 14-year-old girl. This case illustrates the crucial role of {sup 99m}Tc-labeled RBC scintigraphy for the diagnosis of rare ectopic lower GI varices.

  15. Technological advancements revitalize conventional oil sector

    International Nuclear Information System (INIS)

    Thomson, L.

    2000-01-01

    Maturing reserves in the Western Canada Sedimentary Basin is resulting in a gradual shift of focus from huge new discoveries and wildcat gushers to developing new technologies for exploration and enhanced recovery techniques of production, keeping costs down and reducing environmental impacts, as a means of keeping conventional oil plays a viable force in the oil and gas industry. The value in refocusing efforts towards technology development is given added weight by a recent announcement by the Petroleum Communication Foundation, which stated that in addition to the oil sands and offshore oil and gas developments, one of the country's largest undeveloped oil resource is the 70 per cent of discovered crude oil in western Canadian pools that cannot be recovered by current conventional production techniques. Therefore, development of new technologies to exploit these currently unrecoverable resources is a matter of high priority. To remain competitive, the new techniques must also lower the cost of recovering oil from these sources, given that the cost of oil production in Canada is already higher than that in most other competing countries

  16. Comparative Study and Critical Analysis of Sustainability Reporting in the Oil and Gas Sector

    OpenAIRE

    Thomas, Prakash M.

    2006-01-01

    Oil and Gas sector is one of the largest and major economic sectors globally. It is also one of the most critical in terms of being a basic driver for all other economic activities worldwide. In the recent times we have seen large scale volatility in Oil and Gas prices and a surge in huge profits for Oil and Gas sector companies. Oil and Gas sector is also one of the major sectors with tremendous impact on not just environmental factors but also on Social and Economic factors. All major Oil a...

  17. Research on fast Fourier transforms algorithm of huge remote sensing image technology with GPU and partitioning technology.

    Science.gov (United States)

    Yang, Xue; Li, Xue-You; Li, Jia-Guo; Ma, Jun; Zhang, Li; Yang, Jan; Du, Quan-Ye

    2014-02-01

    Fast Fourier transforms (FFT) is a basic approach to remote sensing image processing. With the improvement of capacity of remote sensing image capture with the features of hyperspectrum, high spatial resolution and high temporal resolution, how to use FFT technology to efficiently process huge remote sensing image becomes the critical step and research hot spot of current image processing technology. FFT algorithm, one of the basic algorithms of image processing, can be used for stripe noise removal, image compression, image registration, etc. in processing remote sensing image. CUFFT function library is the FFT algorithm library based on CPU and FFTW. FFTW is a FFT algorithm developed based on CPU in PC platform, and is currently the fastest CPU based FFT algorithm function library. However there is a common problem that once the available memory or memory is less than the capacity of image, there will be out of memory or memory overflow when using the above two methods to realize image FFT arithmetic. To address this problem, a CPU and partitioning technology based Huge Remote Fast Fourier Transform (HRFFT) algorithm is proposed in this paper. By improving the FFT algorithm in CUFFT function library, the problem of out of memory and memory overflow is solved. Moreover, this method is proved rational by experiment combined with the CCD image of HJ-1A satellite. When applied to practical image processing, it improves effect of the image processing, speeds up the processing, which saves the time of computation and achieves sound result.

  18. Ubiquitous UAVs: a cloud based framework for storing, accessing and processing huge amount of video footage in an efficient way

    Science.gov (United States)

    Efstathiou, Nectarios; Skitsas, Michael; Psaroudakis, Chrysostomos; Koutras, Nikolaos

    2017-09-01

    Nowadays, video surveillance cameras are used for the protection and monitoring of a huge number of facilities worldwide. An important element in such surveillance systems is the use of aerial video streams originating from onboard sensors located on Unmanned Aerial Vehicles (UAVs). Video surveillance using UAVs represent a vast amount of video to be transmitted, stored, analyzed and visualized in a real-time way. As a result, the introduction and development of systems able to handle huge amount of data become a necessity. In this paper, a new approach for the collection, transmission and storage of aerial videos and metadata is introduced. The objective of this work is twofold. First, the integration of the appropriate equipment in order to capture and transmit real-time video including metadata (i.e. position coordinates, target) from the UAV to the ground and, second, the utilization of the ADITESS Versatile Media Content Management System (VMCMS-GE) for storing of the video stream and the appropriate metadata. Beyond the storage, VMCMS-GE provides other efficient management capabilities such as searching and processing of videos, along with video transcoding. For the evaluation and demonstration of the proposed framework we execute a use case where the surveillance of critical infrastructure and the detection of suspicious activities is performed. Collected video Transcodingis subject of this evaluation as well.

  19. Advances in biofuel production from oil palm and palm oil processing wastes: A review

    Directory of Open Access Journals (Sweden)

    Jundika C. Kurnia

    2016-03-01

    Full Text Available Over the last decades, the palm oil industry has been growing rapidly due to increasing demands for food, cosmetic, and hygienic products. Aside from producing palm oil, the industry generates a huge quantity of residues (dry and wet which can be processed to produce biofuel. Driven by the necessity to find an alternative and renewable energy/fuel resources, numerous technologies have been developed and more are being developed to process oil-palm and palm-oil wastes into biofuel. To further develop these technologies, it is essential to understand the current stage of the industry and technology developments. The objective of this paper is to provide an overview of the palm oil industry, review technologies available to process oil palm and palm oil residues into biofuel, and to summarise the challenges that should be overcome for further development. The paper also discusses the research and development needs, technoeconomics, and life cycle analysis of biofuel production from oil-palm and palm-oil wastes.

  20. Economics of Russian oil production

    International Nuclear Information System (INIS)

    Gubenko, I.

    1993-01-01

    The main technical indicators of oil production in Russia are presented from the year 1988, when the current decline in oil production started. In 1992, only 9 new oil deposits were put into production, and average well productivity dropped to 12.4 tonnes/d. The number of idle wells reached 31,934 as compared to 8,714 in 1988. The share of low productivity deposits in 1993 was 49.7%. In the first five months of 1993, the number of new wells put into operation failed to offset the shutdown of old wells. Although the number of workovers grew by 32%, this work was insufficient to stabilize oil production. The decline in production is due to the general state of economic stability and endless reorganizations in the economy, and to the lack of sufficient investment in the industry. Oil-producing enterprises have lacked funds due to systematic and growing indebtedness of buyers of crude. This overdue indebtedness reached 393 billion rubles by the beginning of 1993. Although domestic oil prices increased sharply in 1991-92, the volume of production in real terms has dropped by nearly a third. Oil is sold at different prices to different categories of buyers. Prices include expenses, profit from which a 32% profits tax is paid, excise taxes, and payments to a centralized price-regulation fund. From the industry point of view, certain reforms are necessary to reconstruct and develop the industry. These include ensuring payments to oil producers, gradual transfer of Russian prices to world levels, lowering taxes, and adoption and refinement of a law on oil. 1 fig., 7 tabs

  1. Turbine oil change - the smart way

    International Nuclear Information System (INIS)

    Ahlf, J.; Prenzel, H.; Ertelt, R.

    2002-01-01

    The Nuclear Plant Unterweser (KKU) was commissioned in 1978. The gross installed capacity amounts to 1,410 MW. Prior to commissioning the nuclear power plant in 1978, the turbine was filled with fresh oil. This turbine oil did not display any significant ageing or operational restrictions in the following 15 years. Based on our experience, we believe that this behaviour is typical for all initial fillings in new plants. Since the beginning of the 90ies, the contamination of the entire turbine cycle has increased due to the precipitation of oil ageing products and additives decomposed by oxygen. Therefore, the initial filling was replaced by a new oil in 1994, without measures to remove ageing products or additive deposits from the oil cycle. Therefore, it is not surprising that after merely four years this oil filling displayed the same properties as the first filling after 15 years. As a consequence, another oil change was urgently required in 1999. (orig.) [de

  2. Oil geochemistry of the Putumayo basin

    International Nuclear Information System (INIS)

    Ramon, J.C

    1996-01-01

    Bio marker fingerprinting of 2O crude oils from Putumayo Basin, Colombia, shows a vertical segregation of oil families. The Lower Cretaceous reservoirs (Caballos and 'U' Villeta sands) contain oils that come from a mixture of marine and terrestrial organic matter, deposited in a marginal, 'oxic' marine setting. The Upper Cretaceous ('T' and N ' sands) and Tertiary reservoirs contain oils with marine algal input deposited in a reducing, carbonate-rich environment. Lithology, environmental conditions and organic matter type of source rocks as predicted from oil bio marker differences correspond to organic composition of two Cretaceous source rocks. Vertical heterogeneity in the oils, even those from single wells, suggests the presence of two isolated petroleum systems. Hydrocarbons from Lower Cretaceous source rocks charged Lower Cretaceous reservoirs whereas oils from Upper Cretaceous source rocks charged Upper Cretaceous and Tertiary reservoirs. Oil migration from mature source rocks into multiple reservoirs has been stratigraphically up dip along the regional sandstone units and vertical migration through faults has been limited. Bio marker maturity parameters indicate that all oils were generated from early thermal maturity oil window

  3. Peak Oil and other threatening peaks-Chimeras without substance

    International Nuclear Information System (INIS)

    Radetzki, Marian

    2010-01-01

    The Peak Oil movement has widely spread its message about an impending peak in global oil production, caused by an inadequate resource base. On closer scrutiny, the underlying analysis is inconsistent, void of a theoretical foundation and without support in empirical observations. Global oil resources are huge and expanding, and pose no threat to continuing output growth within an extended time horizon. In contrast, temporary or prolonged supply crunches are indeed plausible, even likely, on account of growing resource nationalism denying access to efficient exploitation of the existing resource wealth.

  4. Chemical aspects of shale and shale oils

    Energy Technology Data Exchange (ETDEWEB)

    Hackford, J E

    1922-01-01

    To prove that the kerogen in oil shale is a form of bitumen, several experiments were made with oil shale and a heavy asphaltic oil mixed with fuller's earth. When distilled, both the oil shale and asphalt-impregnated fuller's earth yielded paraffin oil, wax, and hydrogen sulfide (if sulfur was present). Both yielded ammonia if nitrogen was present. The organic material in each was partly isolated by extraction with pyridine and appeared to be the same. Oil shale is a marl that was saturated with oil or through which oil has passed or filtered. The insolubilities of its organic compounds are due to a slightly elevated temperature for a prolonged period and to the retaining effect exerted by the finely divided marl. The marl exerted a selective action on the oil and absorbed the asphaltum, sulfur, and nitrogen compounds from the oil. The class of oil evolved from a shale depended on the nature of the original compounds absorbed. Asphaltenes obtained from crude oil by precipitation with ethyl ether produced distillation products of water, hydrogen sulfide, ammonia, oil, wax, and a carbonaceous residue. Water was formed by decomposition of oxyasphaltenes and hydrogen sulfide by decomposition of thioasphaltenes. Ammonia was evolved during decomposition if lime was present, but if there was not sufficient free lime present, pyridine and pyrrole derivatives were redistilled as such. The oil and wax that resulted from the dry distillation were true decomposition products and equaled about 60 weight-percent of the asphaltenes. The oil and wax content of the mixture varied between 8 and 10 percent. The carbonaceous residue, which represented approximately 40 percent of the original asphaltene, was a decomposition product of the asphaltenes. Geologic comparisons of oil-shale deposits and oil-well fields were also made.

  5. Effect of different levels of feed restriction and fish oil fatty acid supplementation on fat deposition by using different techniques, plasma levels and mRNA expression of several adipokines in broiler breeder hens.

    Directory of Open Access Journals (Sweden)

    Namya Mellouk

    Full Text Available Reproductive hens are subjected to a restricted diet to limit the decline in fertility associated with change in body mass. However, endocrine and tissue responses to diet restriction need to be documented.We evaluated the effect of different levels of feed restriction, with or without fish oil supplementation, on metabolic parameters and adipokine levels in plasma and metabolic tissues of reproductive hens.We designed an in vivo protocol involving 4 groups of hens; RNS: restricted (Rt unsupplemented, ANS: ad libitum (Ad, receiving an amount of feed 1.7 times greater than animals on the restricted diet unsupplemented, RS: Rt supplemented, and AS: Ad supplemented. The fish oil supplement was used at 1% of the total diet composition.Hens fed with the Rt diet had a significantly (P < 0.0001 lower growth than Ad hens, while the fish oil supplementation had no effect on these parameters. Furthermore, the bioelectrical impedance analysis (BIA and the fat ultrasonographic examinations produced similar results to the other methods that required animals to be killed (carcass analysis and weight of adipose tissue. In addition, the Rt diet significantly (P < 0.05 decreased plasma levels of triglycerides, phospholipids, glucose and ADIPOQ, and fish oil supplementation decreased plasma levels of RARRES2. We also showed a positive correlation between insulin values and ADIPOQ or NAMPT or RARRES2 values, and a negative correlation of fat percentage to RARRES2 values. Moreover, the effects of the Rt diet and fish oil supplementation on the mRNA expression depended on the factors tested and the hen age.Rt diet and fish oil supplementation are able to modulate metabolic parameters and the expression of adipokines and their receptors in metabolic tissue.

  6. Hydrocarbon oils

    Energy Technology Data Exchange (ETDEWEB)

    Foorwood, G F; Taplay, J G

    1916-12-12

    Hydrocarbon oils are hydrogenated, cracked, or treated for the removal of sulfur by bringing their vapors mixed with steam at temperatures between 450 and 600/sup 0/C into contact with a form of carbon that is capable of decomposing steam with the production of nascent hydrogen at those temperatures. The forms of carbon used include lamp-black, soot, charcoals derived from wood, cellulose, and lignite, and carbons obtained by carbonizing oil residues and other organic bodies at temperatures below 600/sup 0/C. The process is applied to the treatment of coal oil, shale oil, petroleum, and lignite oil. In examples, kerosene is cracked at 570/sup 0/C, cracked spirit is hydrogenated at 500/sup 0/C, and shale spirit is desulfurized at 530/sup 0/C. The products are led to a condenser and thence to a scrubber, where they are washed with creosote oil. After desulfurization, the products are washed with dilute caustic soda to remove sulfurretted hydrogen.

  7. Oil crises

    International Nuclear Information System (INIS)

    Linderoth, H.

    1992-01-01

    The author's aim was to give very precise information on the many causes and effects of the oil crises that have occurred since 1900, and at the same time offer the reader the possibility to build up a basic knowledge of the oil industry and market, as he feels that the public is often subjected to misleading information. Political and economical aspects are elaborated. First-hand sources such as statistics and investigations have been used as far as possible to give information on the oil market. An oil crisis is defined by the author as a significant change in the price of oil compared to prices of other goods. Changes can be in the form of either rising or falling prices. A special chapter concentrates on Denmark in relation to the oil crises. (AB) (165 refs.)

  8. Numerical study on oil supply system of a rotary compressor

    International Nuclear Information System (INIS)

    Wu, Jianhua; Wang, Gang

    2013-01-01

    The oil supply system is a crucial reliability issue for rotary compressors. This paper provides a general method for analyzing the oil supply system of a rotary compressor by using computational fluid dynamics (CFD). The process includes establishing the physical model, dividing computational grid, setting boundary conditions, calculating leakage rates through the roller end clearances, translating the dynamic issue into the static issue and so on. Validation of the rationality of the oil supply system model has been made by the measurement of the main bearing oil flow rates. The effects of operating conditions of the compressor, the oil level height of the oil sump and the main design parameters of the oil supply system on the oil supply characteristics are analyzed by numerical simulation. It is found that the main bearing oil flow rate varies circularly along with the rotation of the shaft. The shape and inclination angle of the spiral groove also influence the main bearing oil flow rate. The oil leakage rates through the roller end clearances depend largely on the operating conditions. In addition, the oil level height of the oil sump has a huge effect on the total oil flow rate. -- Highlights: • A CFD method for analyzing the oil supply system of rotary compressor is presented. • Leakage through the roller end clearances depends on the operating condition. • Groove shape and inclination angle are the main design parameters of spiral grooves. • A parabolic interface of oil and gas can be formed in the gallery of the shaft. • Single-flow model and steady solver can be applied to the oil supply system

  9. Metagenomics reveals sediment microbial community response to Deepwater Horizon oil spill

    DEFF Research Database (Denmark)

    Mason, Olivia U.; Scott, Nicole M.; Gonzalez, Antonio

    2014-01-01

    The Deepwater Horizon (DWH) oil spill in the spring of 2010 resulted in an input of similar to 4.1 million barrels of oil to the Gulf of Mexico; >22% of this oil is unaccounted for, with unknown environmental consequences. Here we investigated the impact of oil deposition on microbial communities...

  10. One last boom : Alberta's rapidly expanding oil mines may be the largest and messiest industrial projects in Canadian history

    International Nuclear Information System (INIS)

    Laird, G.

    2001-01-01

    The bitumen deposits of Alberta, 2.5 trillion barrels of oil, of which 300 billion are considered recoverable, represent the greatest single petroleum resources of the world, based on surface and subsurface calculations. Four deposits, covering an area the size of New Brunswick, are located in the area stretching from Cold Lake to Lloydminster (east of Edmonton), the upper reaches of the Athabasca River east to the Peace River. The largest by far is the Athabasca deposit in the vicinity of Fort McMurray, spread over 4.3 million hectares. The deposit is at the centre of the biggest industrial expansion witnessed by the province. Since 1996, 38 billion dollars worth of new projects have been announced. It is estimated that by 2025, the bulk of the national oil production will originate from open-pit mines and underground wells around Fort McMurray. This oil boom has economic benefits for the population, from welders to real estate agents to stakeholders. The environmental effects are not as beneficial. Huge strip mines are being carved next to the Athabasca River, with great amounts of greenhouse gases emissions. The Suncor and Syncrude oil-sands plants combined represent the fourth largest carbon dioxide emission source in Canada. The development of these projects dramatically affects global warming. The nitrogen and sulphur emissions could also acidify lakes and soil in the region. The Suncor mine resulted from the first boom to hit Fort McMurray in 1964. The Syncrude mine is the result of the second boom which took place in 1973. In 1996, Suncor installed a sulphur scrubber system that removes 95 per cent of sulphur dioxide from the electricity and steam-generation plant. Suncor also invested in various projects, such as wind-power, rainforest cultivation and biomass generation. The volume of pollution increases as the operations expand, even if operations are cleaner. If no new gains in pollution control are achieved, it is expected that by 2015, the total

  11. Oil pollution

    International Nuclear Information System (INIS)

    Mankabady, Samir.

    1994-08-01

    Oil enters the marine environment when it is discharged, or has escaped, during transport, drilling, shipping, accidents, dumping and offshore operations. This book serves as a reference both on the various complex international operational and legal matters of oil pollution using examples such as the Exxon Valdez, the Braer and Lord Donaldson's report. The chapters include the development of international rules on the marine environment, the prevention of marine pollution from shipping activities, liability for oil pollution damage, the conflict of the 1990 Oil Pollution Act and the 1992 protocols and finally the cooperation and response to pollution incidents. (UK)

  12. Research of losses of oil oil and mineral oil at transportation and storage

    International Nuclear Information System (INIS)

    Akzhigitov, A.S.

    2005-01-01

    Full text : All way of hydrocarbonic raw material from a mouth of oil wells up to the consumer is accompanied by losses which occur as a result of evaporation, outflow and change of quality. Therefore preservation of quantity and quality of oil and mineral oil during transportation and storages is the major not only economic, but also an ecological problem. The facilitated fractional structure, the big maintenance concern to prominent features of the majority oil from underground salts adjournment Prycaspi in them of the easy hydrocarbons, the raised gas factor in conditions of deposits and presence in structure of gases, except for hydrocarbons and sour a component, - hydrogen sulphide, carbonic gas, etc. The superficial tests stabilized on phase structure oil depending on conditions of preparation for external transport and the subsequent processing can contain this or that quantity of residual hydrogen sulphide, easy hydrocarbons and the lowest sulfhydrates. For change of temperature and external pressure, during transportation and storage the part of easy hydrocarbons and not hydrocarbonic connections (sulfur organic) can be allocated from oil in a gaseous phase and in case of hit in an atmosphere sharply worsens ecology. In the Western Kazakhstan during the years period the temperature of air sometimes reaches up to 40-45 degrees. As is known, at such temperature there is a strengthened warming up of the open surface of oil tanks, that finally leads to increase evaporation easy oil and oil hydrocarbons. With this purpose experiences by quantitative definition evaporation lungs oil and petromixes of the Western Kazakhstan were spent. As a result of the lead works it is found out, that the size of losses at the given fixed temperature depends on evaporation by nature, fractional and hydrocarbonic structures of oil

  13. Elective hemi transurethral resection of prostate: a safe and effective method of treating huge benign prostatic hyperplasia

    International Nuclear Information System (INIS)

    Abidi, S.S.; Feroz, I.; Aslam, M.; Fawad, A.

    2012-01-01

    To evaluate the safety and efficacy of elective hemi-resection of prostate in patients with huge gland, weighing more than 120 grams. Study Design: Multi centric, analytical comparative study. Place and Duration of Study: Department of Urology, Karachi Medical and Dental College, Abbasi Shaheed Hospital and Dr. Ziauddin Hospital, Karachi, from August 2006 to July 2009. Methodology: All benign cases were included in this study and divided into two groups. In group A, patients having huge prostate (> 120 grams) were placed and hemi TURP was performed. In group B, patients having 60 to 100 grams prostate were placed and conventional Blandy's TURP was performed. Results of both groups were compared in terms of duration of surgery, amount of tissue resected, operative bleeding, postoperative complications, duration of postoperative catheterization, re-admission and re-operations. Effectiveness of procedure was assessed by a simple questionnaire filled by the patients at first month, first year and second year. Patients satisfaction in terms of their ability to void, control urination, frequency, urgency, urge incontinence, haematuria, recurrent UTI, re-admission and re-operations were also assessed. Fisher exact test was applied to compare the safety and efficacy of variables. Results: In group A and B, average age range was 72 and 69 years, average weight of prostate was 148 and 70 grams, average duration of surgery was 102 and 50 minutes respectively. Average weight of resected tissue was 84 and 54 grams and haemoglobin loss was two grams and one gram respectively. Total hospital stay was 5 and 4 days. Total duration of indwelling Foley's catheter (postoperative) was 5 days and 2 days. Patient satisfaction in term of urine flow, urinary control, improvement in frequency and nocturia were comparable in both groups. UTI and re-admission was more in hemi resection group. At the end of 2 years follow-up, there is no statistical difference between the safety and efficacy

  14. Infraordinary Deposits

    DEFF Research Database (Denmark)

    2016-01-01

    The exhibition Infraordinary Deposits presents three works in progress by PhD Fellow Espen Lunde Nielsen from the on-going PhD project Architectural Probes of the Infraordinary: Social Coexistence through Everyday Spaces. The infraordinary is understood as the opposite of the extraordinary...... and as that which is ‘worn half-invisible’ by use. Nevertheless, these unregarded spaces play a vital role to the social dimension of the city. The selected projects (‘urban biopsies’) on display explore how people coexist through these spaces and within the city itself, either through events in real......, daily 8.45 – 15.00 Where: Aarhus School of Architecture, The Canteen, Nørreport 18, 8000 Aarhus C...

  15. Effect of different levels of feed restriction and fish oil fatty acid supplementation on fat deposition by using different techniques, plasma levels and mRNA expression of several adipokines in broiler breeder hens.

    Science.gov (United States)

    Mellouk, Namya; Ramé, Christelle; Marchand, Maxime; Staub, Christophe; Touzé, Jean-Luc; Venturi, Éric; Mercerand, Frédéric; Travel, Angélique; Chartrin, Pascal; Lecompte, François; Ma, Linlin; Froment, Pascal; Dupont, Joëlle

    2018-01-01

    Reproductive hens are subjected to a restricted diet to limit the decline in fertility associated with change in body mass. However, endocrine and tissue responses to diet restriction need to be documented. We evaluated the effect of different levels of feed restriction, with or without fish oil supplementation, on metabolic parameters and adipokine levels in plasma and metabolic tissues of reproductive hens. We designed an in vivo protocol involving 4 groups of hens; RNS: restricted (Rt) unsupplemented, ANS: ad libitum (Ad, receiving an amount of feed 1.7 times greater than animals on the restricted diet) unsupplemented, RS: Rt supplemented, and AS: Ad supplemented. The fish oil supplement was used at 1% of the total diet composition. Hens fed with the Rt diet had a significantly (P hens, while the fish oil supplementation had no effect on these parameters. Furthermore, the bioelectrical impedance analysis (BIA) and the fat ultrasonographic examinations produced similar results to the other methods that required animals to be killed (carcass analysis and weight of adipose tissue). In addition, the Rt diet significantly (P hen age. Rt diet and fish oil supplementation are able to modulate metabolic parameters and the expression of adipokines and their receptors in metabolic tissue.

  16. Hydrogen-terminated mesoporous silicon monoliths with huge surface area as alternative Si-based visible light-active photocatalysts

    KAUST Repository

    Li, Ting

    2016-07-21

    Silicon-based nanostructures and their related composites have drawn tremendous research interest in solar energy storage and conversion. Mesoporous silicon with a huge surface area of 400-900 m2 g-1 developed by electrochemical etching exhibits excellent photocatalytic ability and stability after 10 cycles in degrading methyl orange under visible light irradiation, owing to its unique mesoporous network, abundant surface hydrides and efficient light harvesting. This work showcases the profound effects of surface area, crystallinity, pore topology on charge migration/recombination and mass transportation. Therein the ordered 1D channel array has outperformed the interconnected 3D porous network by greatly accelerating the mass diffusion and enhancing the accessibility of the active sites on the extensive surfaces. © 2016 The Royal Society of Chemistry.

  17. Analysis of the Huge Immigration of Sogatella furcifera (Hemiptera: Delphacidae) to Southern China in the Spring of 2012.

    Science.gov (United States)

    Sun, Si-Si; Bao, Yun-Xuan; Wu, Yan; Lu, Min-Hong; Tuan, Hoang-Anh

    2018-02-08

    Sogatella furcifera (Horváth) is a migratory rice pest that periodically erupts across Asia, and early immigration is an important cause of its outbreak. The early immigration of S. furcifera into southern China shows evident annual fluctuations. In the spring of 2012, the huge size of the immigrant population and the large number of immigration peaks were at levels rarely seen prior to that year. However, little research has been done on the entire process of round-trip migration to clarify the development of the population, the long-distance migration and the final eruption. In this study, the light-trap data for S. furcifera in southern China and Vietnam in 2011-2016 were collected, and the trajectory modeling showed that the early immigrants to southern China came from the northern and central Vietnam, Laos, and northeastern Thailand. Analysis of the development of the population, the migration process and meteorological factors revealed the reasons for the huge size of the early immigration: 1) the expansion of the source area could be seen as a precondition; 2) the large size of the returned population in the last autumn and the warm temperature of southern Vietnam and Laos in the last winter increased the initial populations; 3) the sustained strong southwest winds were conducive to the northward migration of the population during the major immigration period in early May. Therefore, the large-scale immigration of S. furcifera to southern China in the spring of 2012 resulted from the combined effects of several factors involved in the process of round-trip migration. © The Author(s) 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  18. Volatile oil composition of Taif Ros

    International Nuclear Information System (INIS)

    Bahaffi, Saleh Omar S.

    2005-01-01

    The city of Taif is located in the western region of the Kingdom of Saudi Arabia. This city is characterized by beautiful roses from the species of Rosa Damascena. Extraction of rose oil from fresh battles has been done using huge cupric pots. Identification of the chemical components of rose oil has been done with Shimadzu gas chromatograph-mass spectrometer, GC-MS QP 5050. Sixty five compounds have been identified; three of the represent 61.07% of oil components; they are citronellol 31.27%, geraniol 19.52, and 5-methyl octadecane 10.25%. Twelve compounds have percentage between 1% and 10%. Fifty compounds are less than 1%. (author)

  19. The Alberta oil sands story

    Energy Technology Data Exchange (ETDEWEB)

    1974-01-01

    This report serves as a detailed introduction to the Alberta oil sands and their development. It includes a description of the oil sands deposits, an outline of crude bitumen recovery and upgrading processes, the role of Alberta Energy Company in oil sands development, environmental aspects, manpower requirements for oil sands development, research needs, and further oil sands projects. Presently proven recoverable reserves in the oil sands amount to 26.5 billion bbl of synthetic crude. Production from the Syncrude plant (125,000 bbl/d capacity) is expected to begin in 1977, followed by a Shell Canada operation around 1980. The provincial government will participate in the oil sand industry through its joint venture participation in Syncrude and its 50% share in Alberta Energy Company; the latter company participates in related aspects of the Syncrude project, such as pipelines. The result of Alberta's participation in the industry will mean that, directly or indirectly, the province will realize 60% of the total profits. The job creation potential of oil sands projects is estimated to be extensive, with a direct and indirect work force supported by oil sands activities possibly reaching 180,000 persons by the year 2000. Research needs have been identified, particularly in the area of in-situ thermal recovery technology, and the creation of the Alberta Oil Sands Technology and Research Authority has been authorized in order to meet these needs. Although current reserves are sufficient to support 20-30 synthetic crude plants, a number of factors will limit expansion of the industry. 8 figs., 5 tabs.

  20. Oil sands and heavy oil development issues and prospects under a Liberal government

    International Nuclear Information System (INIS)

    Shiry, J.

    1993-01-01

    A short review is presented of some of the factors affecting development of the western Canadian oil sands and heavy oil deposits to the year 2000. The Alberta oil sands resource has at least 1 trillion bbl of recoverable oil. At current prices, technology is the key to reducing costs to a more economic level. Cash operating costs have halved to $15/bbl over the past decade and the oil sands companies have programs to halve that figure again. A problem is the rising cost of natural gas as a fuel, which could jeopardize further development of both oil sand and heavy oil resources. In Saskatchewan, over 25 billion bbl of heavy oil are estimated to be in place. The biggest question is what percentage can be recovered; again, technology such as horizontal wells, 3-dimensional seismic, and steam assisted recovery is playing an important role. Concerns are expressed about the intentions of the new Liberal government concerning oil sand/heavy oil development, especially on the issues of foreign investment, exports, and environmental policy. A Liberal energy policy is not likely to allow U.S. direct investment in an oil sands plant to be tied to export of production, and the energy- and emissions-intensive nature of the oil sand/heavy oil industry will tend to make environmental approvals difficult

  1. seed oil

    African Journals Online (AJOL)

    Wara

    Neem seed oil from the neem tree (Azadiracta indica) finds wide usage one of which is its utilization for cosmetics particularly .... obtained which is higher than that of olive oil 17. mgKOH/g (Davine ... The skin tolerance of shea fat employed as ...

  2. Facies and depositional model of Almada Canyon, Almada Basin, Bahia, Brazil; Facies e modelo deposicional do Canyon de Almada, Bacia de Almada, Bahia

    Energy Technology Data Exchange (ETDEWEB)

    D' Avila, Roberto Salvador Francisco; Souza Cruz, Carlos Emanoel de; Oliveira Filho, Jose Souto; Jesus, Candida Menezes de; Cesero, Pedro de; Dias Filho, Dorval Carvalho; Lima, Claudio Coelho de; Queiroz, Claudia Lima de; Santos, Saulo Ferreira; Ferreira, Eduardo Araripe [PETROBRAS, Santos, SP (Brazil). Unidade de Negocio de Exploracao]. E-mail: rdavila@petrobras.com.br

    2004-11-01

    In the continental portion of the Almada Basin outcrops of canyon filling deposits are represented by turbidite channels and associated facies from Urucutuca Formation. The canyon - semi-exhumated - eroded basement and pre-Cenomanian sedimentary rocks. The field study of the outcrops and cores obtained in adjacent perforations lead to the understanding of the facies and processes that controlled the deposition of these channeled turbidite that can be compared to the reservoirs of many oil fields in Brazil. The Almada canyon is a submarine conduct of tectonic origin that was enlarged by the repeated passing of turbidity currents. During the rift phase and the Albian period, compressive events reactivated old N E and N W faults in the basement as trans current fault systems. The continuation of these stresses, from the Cenomanian to the Maastrichtian, developed normal faults that controlled a submarine canyon that connected the continent, where an estuary was formed between the mountains, to the deep marine region of the basin. The canyon has received sediments brought by catastrophic fluvial floods coming from the surrounding mountains, which formed hyperpicnal flows that have evolved as turbidity currents, thus causing erosion of the substrate and carrying a huge volume of sediments to the basin. A part of that load was deposited in the canyon and formed turbidite channels filled by conglomerates, sandstones and shales. These moderately to highly efficient turbidite are intercalated to pro delta pelites and low density turbid plumes deposits, which have mostly been re mobilized as slump and debris flows (chaotic deposits). Pelites were accumulated mainly in the normal fluvial sedimentation phases, when the sandy sediment was retained next to the canyon head and were reworked by the tides on the upper part of the estuary. (author)

  3. The features of the isotope composition of carbon in the Paleozoic and Mesozoic oils of Western Siberia

    Energy Technology Data Exchange (ETDEWEB)

    Golyshev, S.I.; Lebedena, L.V.

    1984-01-01

    The isotope composition of the carbon in the oils from the Mesozoic and Paleozoic deposits is measured. The variations in the isotope composition of carbon for the Paleozoic oils is between 27.5 and 30.8 percent, while for the oils from the lower Jurassic and Triassic levels it is between 27.7 and 31.2 percent and for the upper Jurassic oils it is between 30.1 and 34.5 percent. The dependence of the isotope composition of the carbon in the oils on the type of original organic matter and its metamorphosis conditions during lithogenesis is analyzed. A softening in the isotope composition of the carbon in the oils from the oceanic deposits relative to continental deposits is found, together with a genetic individualism of the oils from the Paleozoic deposits and their difference from the oils in the Mesozoic deposits.

  4. Modern efficient methods of steel vertical oil tanks clean-up

    Directory of Open Access Journals (Sweden)

    Nekrasov Vladimir

    2016-01-01

    Full Text Available The legislative base of the Russian Federation operating in the field of operation of tanks and tank parks is considered, and consecutive stages of technological process of cleaning of vertical steel tanks from oil ground deposits are presented. In work shortcomings of existing most widespread electromechanical mixers are described when using a hydraulic method of removal and prevention of formation of ground deposits in tanks with oil and oil products. For the purpose of increase of efficiency, reliability and decrease in power consumption of washout of oil ground deposits in tanks the new design of system of funneled washout and prevention of formation of deposits is offered.

  5. A Review of Laboratory-Scale Research on Upgrading Heavy Oil in Supercritical Water

    Directory of Open Access Journals (Sweden)

    Ning Li

    2015-08-01

    Full Text Available With the growing demand for energy and the depletion of conventional crude oil, heavy oil in huge reserve has attracted extensive attention. However, heavy oil cannot be directly refined by existing processes unless they are upgraded due to its complex composition and high concentration of heteroatoms (N, S, Ni, V, etc.. Of the variety of techniques for heavy oil upgrading, supercritical water (SCW is gaining popularity because of its excellent ability to convert heavy oil into valued, clean light oil by the suppression of coke formation and the removal of heteroatoms. Based on the current status of this research around the world, heavy oil upgrading in SCW is summarized from three aspects: Transformation of hydrocarbons, suppression of coke, and removal of heteroatoms. In this work, the challenge and future development of the orientation of upgrading heavy oil in SCW are pointed out.

  6. OIL DECONTAMINATION OF BOTTOM SEDIMENTS EXPERIMENTAL WORK RESULTS

    Directory of Open Access Journals (Sweden)

    Lushnikov Sergey V.

    2006-08-01

    Full Text Available This article presents the results of experimental work during 2004-2005 on oil decontamination of bottom sediments of Lake Schuchye, situated in the Komi Republic (Northern Russia. The cause of thecontamination were huge oil spills occurred after a series of accidental ruptures on the Harjaga-Usinsk and Vozej-Usinsk oil-pipe lines in 1994. Flotation technology was used for the cleaning of bottom sediments.157 tons of crude oil were removed during the course of 2-year experimental work from an area of 4,1 ha.The content of aliphatic and alicyclic oil hydrocarbons was reduced from 53,3 g/kg to 2,2 g/kg, on average.Hydrobiological investigations revealed that bottom sediments started to be inhabited by benthos organisms, dominantly Oligochaeta. Besides Oligochaeta, Chironomidae maggots and Bivalvia were detected. Theappearance of Macrozoobenthos organisms can serve as a bioindicator of water quality.

  7. Oils; gas

    Energy Technology Data Exchange (ETDEWEB)

    Day, D T

    1922-09-18

    Oils and gas are obtained from shale or oil-bearing sand by immersing the shale in and passing it through a bath of liquid oil, cracking the oil-soaked shale, and condensing the vapor and using the condensate to replenish the bath, preferably by passing the gases and vapors direct into the oil-bath container. Shale is fed continuously from a hopper to a bath of oil in an inclined chamber, is carried to the outlet by a conveyer, and through cracking tubes to an outlet pipe by conveyers. The gases and vapors escape by the pipe, a part condensing in the chamber and a run-back pipe and replenishing the bath, and the remainder passing through a condensing tower and condenser connected to reservoirs; the gas is further passed through a scrubber and a pipe to the burner of the retort. The oil condensed in the chamber overflows to the reservoir through a pipe provided with an open pipe to prevent siphoning. The conveyers and a valve on the pipe are operated by gearing. The operation may be conducted at reduced, normal, or increased pressure, e.g., 70 lbs. The temperature of the retort should be about 900 to 1400/sup 0/F, that of the inside of the tubes about 550 to 700/sup 0/F, and that of the chamber about 300/sup 0/F. The chamber and pipe may be insulated or artificially cooled.

  8. Oil refineries

    International Nuclear Information System (INIS)

    Boehmer, S.; Winter, B.

    2001-01-01

    In refineries in particular attention is paid to the minimization of the generation of waste. Therefor catalysts in many processes are regenerated, absorbents are recycled and oily by-products are re-refined or used as fuels. This study discusses the origin and utilization of by-products from the oil industry. The processing of crude oils causes by-products and waste resulting from the crude oil itself or from cleaning measures for water pre-treatment, effluent treatment and flue gas treatment. (author)

  9. Recovery of Palm Oil and Valuable Material from Oil Palm Empty Fruit Bunch by Sub-critical Water.

    Science.gov (United States)

    Ahmad Kurnin, Nor Azrin; Shah Ismail, Mohd Halim; Yoshida, Hiroyuki; Izhar, Shamsul

    2016-01-01

    Oil palm empty fruit bunch (EFB) is one of the solid wastes produced in huge volume by palm oil mill. Whilst it still contains valuable oil, approximately 22.6 million tons is generated annually and treated as solid waste. In this work, sub-critical water (sub-cw) was used to extract oil, sugar and tar from spikelet of EFB. The spikelet was treated with sub-cw between 180-280°C and a reaction time of 2 and 5 minutes. The highest yield of oil was 0.075 g-oil/g-dry EFB, obtained at 240°C and reaction time of 5 minutes. Astonishingly, oil that was extracted through this method was 84.5% of that obtained through Soxhlet method using hexane. Yield of oil extracted was strongly affected by the reaction temperature and time. Higher reaction temperature induces the dielectric constant of water towards the non-polar properties of solvent; thus increases the oil extraction capability. Meanwhile, the highest yield of sugar was 0.20 g-sugar/g-dry EFB obtained at 220°C. At this temperature, the ion product of water is high enough to enable maximum sub-critical water hydrolysis reaction. This study showed that oil and other valuable material can be recovered using water at sub-critical condition, and most attractive without the use of harmful organic solvent.

  10. Hypercalcemia and huge splenomegaly presenting in an elderly patient with B-cell non-Hodgkin's lymphoma: a case report

    Directory of Open Access Journals (Sweden)

    Tirgari Farrokh

    2010-10-01

    Full Text Available Abstract Introduction Hypercalcemia is the major electrolyte abnormality in patients with malignant tumors. It can be due to localized osteolytic hypercalcemia or elaboration of humoral substances such as parathyroid hormone-related protein from tumoral cells. In hematological malignancies, a third mechanism of uncontrolled synthesis and secretion of 1-25(OH2D3 from tumoral cells or neighboring macrophages may contribute to the problem. However, hypercalcemia is quite unusual in patients with B-cell non-Hodgkin's lymphoma. Case presentation An 85-year-old Caucasian woman presented with low grade fever, anorexia, abdominal discomfort and fullness in her left abdomen for the last six months. She was mildly anemic and complained of fatigability. She had huge splenomegaly and was hypercalcemic. After correction of her hypercalcemia, she had a splenectomy. Microscopic evaluation revealed a malignant lymphoma. Her immunohistochemistry was positive for leukocyte common antigen, CD20 and parathyroid hormone-related peptide. Conclusion Immunopositivity for parathyroid hormone-related peptide clearly demonstrates that hypersecretion of a parathyroid hormone-like substance from the tumor had led to hypercalcemia in this case. High serum calcium is seen in only seven to eight percent of patients with B-cell non-Hodgkin's lymphoma, apparently due to different mechanisms. Evaluation of serum parathyroid hormone-related protein and 1-25(OH2D3 can be helpful in diagnosis and management. It should be noted that presentation with hypercalcemia has a serious impact on prognosis and survival.

  11. A huge ovarian mucinous cystadenoma associated with contralateral teratoma and polycystic ovary syndrome in an obese adolescent girl.

    Science.gov (United States)

    Thaweekul, Patcharapa; Thaweekul, Yuthadej; Mairiang, Karicha

    2016-12-01

    A 13-year-old, obese girl presented with acute abdominal pain with abdominal distension for a year. The physical examination revealed marked abdominal distension with a large well-circumscribed mass sized 13×20 cm. Her body mass index (BMI) was 37.8 kg/m2. An abdominal CT scan revealed a huge multiloculated cystic mass and a left adnexal mass. She had an abnormal fasting plasma glucose and low HDL-C. Laparotomy, right salpingooophorectomy, left cystectomy, lymph node biopsies and partial omentectomy were performed. The left ovary demonstrated multiple cystic follicles over the cortex. The histologic diagnosis was a mucinous cystadenoma of the right ovary and a matured cystic teratoma of the left ovary. Both obesity and polycystic ovary syndrome (PCOS) are associated with a greater risk of ovarian tumours, where PCOS could be either the cause or as a consequence of an ovarian tumour. We report an obese, perimenarchal girl with bilateral ovarian tumours coexistent with a polycystic ovary and the metabolic syndrome.

  12. Peppermint Oil

    Science.gov (United States)

    ... T U V W X Y Z Peppermint Oil Share: On This Page Background How Much Do ... sheet provides basic information about peppermint and peppermint oil—common names, usefulness and safety, and resources for ...

  13. OIL BOND®

    Science.gov (United States)

    Technical product bulletin: this miscellaneous oil spill control agent is a solidifier used in cleanups. It absorbs and solidifies hydrocarbon spills on freshwater and saltwater or land applications. Ring spill with booms or pillows before treatment.

  14. Mineral oil

    International Nuclear Information System (INIS)

    Schult-Bornemann, Karl-Heinz

    2015-01-01

    The dominant theme in the world energy market was the fall in oil prices in 2014. From 115 US-$/bbl in June it dropped to below 50 US-$/bbl in January 2015. Thereby the shale oil revolution has had the strong impact on the global energy situation, to this point has been predicted for three years. Although no one could predict the exact height of the fall in oil prices, but with oil as a reserve currency for all other fuels, it has not only had an impact on the gas and coal prices, but other commodities, such as copper, have also yielded. About cause and effect, there is a lot of speculation - not all of which are supported by wisdom. [de

  15. Oil on seawater

    International Nuclear Information System (INIS)

    Boerresen, J.A.

    1993-01-01

    The present book discusses the effects of oil spills at sea. Topics covered are as follow: Petroleum properties; oil spills at sea; harmfulness of oil spills; effects from acute oil spills; experience of oil spills; oil spill contingency planning in Norway; oil spill protecting equipment and methods; emergency of unloading equipment. 252 refs., 86 figs., 54 tabs

  16. Merger and acquisition in the international oil industry

    Energy Technology Data Exchange (ETDEWEB)

    Imai, Yoshiichi

    1988-07-01

    Outlines are given of the background and evaluation of recent giant mergers and acquisitions in the international oil industry and of future trends of them. The petroleum exporting countries or OPEC nationalized oil resourses in the first half of 1970's and acquired the crude oil deposits that had been controlled by the seven majors. The percentage of the seven majors' crude oil deposits in the free world was about 70% in 1968, but decreased sharply down to about 6% in 1978 to 1979, when the world experienced the second oil crisis. The decrease of Texaco, COCAL, and Mobil was remarkable. That was the background of these three companies' giant acquisitions in 1984. For the oil companies suffering from decrease of oil deposits, the inexpensive and dependable way to secure deposits was to take over developed reserves of other companies. Although there are the pros and cons in the evaluation of the merger and acquisition, these trends continues, including the oil exporting countries, and are very likely to move to the international reconstraction of the oil industry. (10 tabs)

  17. Japan's involvement in oil sands development

    International Nuclear Information System (INIS)

    Sugiura, T.

    1994-01-01

    According to Japanese national policy, exploration and development by Japanese companies in overseas countries are promoted in order to ensure stable oil supplies. Japan Canada Oil Sands Limited (JACOS), part of the JAPEX group, was established during the 1978 world oil crisis to explore and develop Canadian oil sand resources in accordance with Japan's national policy. The JAPEX group, including JACOS, has invested $123 million in oil sands projects in Alberta. JAPEX's first involvement in oil sands was in the Primrose Project operated by Norcen in the Cold Lake area. Five years of cyclic steam stimulation pilot tests did not produce sufficiently good results to justify further operation. The second involvement was the PCEJ Project, a joint effort by four companies that are participating in a bitumen recovery test project in the Athabasca Deposit. JACOS holds 2,452 km 2 of oil sands leases in Alberta. Tests conducted since 1978 in the PCEJ Project include multiwell steam injection pilot tests, some of which showed promise. JACOS is also participating in steam assisted gravity drainage projects and in federal/provincial research programs. Obstacles identified in developing Alberta oil sands are the lack of a bitumen pipeline to Edmonton and the insufficient length of oil sands leases (currently 10 years), given the difficulties of oil sand development. 10 figs

  18. Precambrian uranium deposits as a possible source of uranium for the European Variscan deposits

    International Nuclear Information System (INIS)

    Mineeva, I.G.; Klochkov, A.S.

    2002-01-01

    The Precambrian uranium deposits have been studied on the territory of Baltic and Ukrainian shields. The primary Early Proterozoic complex Au-U deposits originated in granite-greenstone belts as a result of their evolution during continental earth crust formation by prolonged rift genesis. The greenstone belts are clues for revealing ancient protoriftogenic structures. The general regularities of uranium deposition on Precambrian shields are also traceable in Variscan uranium deposits from the Bohemian massif. The Variscan period of uranium ore formation is connected with a polychronous rejuvenation of ancient riftogenous systems and relatively younger processes of oil and gas formation leading to the repeated mobilization of U from destroyed Proterozoic and Riphean uranium deposits. (author)

  19. Cryptogenic transient ischemic attack after nose blowing: association of huge atrial septal aneurysm with patent foramen ovale as potential cause

    Directory of Open Access Journals (Sweden)

    Lotze U

    2013-07-01

    Full Text Available Ulrich Lotze,1 Uwe Kirsch,1 Marc-Alexander Ohlow,2 Thorsten Scholle,3 Jochen Leonhardi,3 Bernward Lauer,2 Gerhard Oltmanns,4 Hendrik Schmidt5,6 1Department of Internal Medicine, DRK Krankenhaus Sondershausen, Sondershausen, Germany; 2Department of Cardiology, Zentralklinik Bad Berka, Bad Berka, Germany; 3Institute of Diagnostic and Interventional Radiology, Zentralklinik Bad Berka, Germany; 4Department of Internal Medicine, DRK Krankenhaus Sömmerda; Sömmerda, Germany; 5Department of Cardiology and Diabetology, Klinikum Magdeburg, Magdeburg, Germany; 6Department of Internal Medicine III, Martin-Luther-Univeristy Halle-Wittenberg, Halle, Germany Abstract: Association of atrial septal aneurysm (ASA with patent foramen ovale (PFO is considered an important risk factor for cardioembolism frequently forwarding paradoxical embolism in patients with cryptogenic or unexplained cerebral ischemic events. We herein describe the case of a 69-year-old male patient reporting uncontrolled movements of the right arm due to a muscle weakness, slurred speech, and paresthesia in the oral region some seconds after he had blown his nose. These neurological symptoms had improved dramatically within a few minutes and were completely regressive at admission to our hospital about two hours later. On transesophageal echocardiography (TEE a huge ASA associated with PFO was detected. Diagnosis of the large-sized ASA was also confirmed by cardiac magnetic resonance imaging. Due to the early complete recovery from his neurological symptoms, the patient was diagnosed with a transient ischemic attack (TIA. After nine days he was discharged in a good clinical condition under the treatment with oral anticoagulation. It is concluded that in cryptogenic or unexplained stroke or TIA TEE should always be performed to rule out ASA and PFO as potential sources for paradoxical embolism in those inconclusive clinical situations. Keywords: congenital cardiac abnormality, atrial septal

  20. ESR1 Gene Polymorphisms and Prostate Cancer Risk: A HuGE Review and Meta-Analysis.

    Directory of Open Access Journals (Sweden)

    Yu-Mei Wang

    Full Text Available Many published data on the association between single nucleotide polymorphisms (SNPs in the ESR1 gene and prostate cancer susceptibility are inconclusive. The aim of this Human Genome Epidemiology (HuGE review and meta-analysis is to derive a more precise estimation of this relationship.A literature search of PubMed, Embase, Web of Science and Chinese Biomedical (CBM databases was conducted from their inception through July 1st, 2012. Crude odds ratios (ORs with 95% confidence intervals (CIs were calculated to assess the strength of association.Twelve case-control studies were included with a total 2,165 prostate cancer cases and 3,361 healthy controls. When all the eligible studies were pooled into the meta-analysis, ESR1 PvuII (C>T and XbaI (A>G polymorphisms showed no association with the risk of prostate cancer. However, in the stratified analyses based on ethnicity and country, the results indicated that ESR1 PvuII (C>T polymorphism was significantly associated with increased risk of prostate cancer among Asian populations, especially among Indian population; while ESR1 XbaI (A>G polymorphism may significantly increase the risk of prostate cancer among American population. Furthermore, we also performed a pooled analysis for all eligible case-control studies to explore the role of codon 10 (T>C, codon 325 (C>G, codon 594 (G>A and +261G>C polymorphisms in prostate cancer risk. Nevertheless, no significant associations between these polymorphisms and the risk of prostate cancer were observed.Results from the current meta-analysis indicate that ESR1 PvuII (C>T polymorphism may be a risk factor for prostate cancer among Asian populations, especially among Indian population; while ESR1 XbaI (A>G polymorphism may increase the risk of prostate cancer among American population.

  1. Oil's role in free trade agreement crux of Mexico's petroleum sector dilemma

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Mexico's president Salinas' efforts at privatization have not yet touched Mexico's most valuable industry, oil. That remains under control of state owned Petroleos Mexicanos. Pemex and Mexico's huge oil union have come under increasing criticism for alleged abuses of power. In addition, controversy rages as to the true extent of Mexican oil resources and whether Pemex has the wherewithal to meet domestic demand and sustain oil exports. Critics also contend opening Mexico's oil sector to foreign participation would introduce new efficiencies and cost cutting measures in the cash strapped state oil industry. This paper reports that at the center of the controversy is the proposed Free Trade Agreement among Mexico, the U.S., and Canada, pushed strongly by Salinas. Oil's role in the FTA may prove the pact's main sticking point

  2. Use of Polyurethane Coating to Prevent Corrosion in Oil and Gas Pipelines Transfer

    OpenAIRE

    Amir Samimi

    2012-01-01

    Corrosion is one of the major problems in the oil and gas industry is one that automatically allocates huge sums annually. Polyurethane is a thermoses polymer with various applications. Using form this polymer has spread for military applications by Otto Bayer in 1930. In one general look polyurethane is product of Iso Syanate and ploy with each other, So that: Iso + ploy = polyurethane. Spend large cost for application and launching oil and gas transitions, has cleared the necessity protecti...

  3. Oilseeds and vegetable oils in asia: a world of diversity

    Directory of Open Access Journals (Sweden)

    Mittaine Jean-François

    2016-11-01

    Full Text Available Out of the two dozen countries that constitute what is generally called “Asia”, some are the largest in the world while others are islands with smaller populations. When looking at oilseeds and vegetable oils in the region, one is faced with the same huge diversity which makes it complex to analyze, all the more that statistics are not easily available for many countries. Aside from the large differences in size, the region covers a wide spectrum of diversified climate environments. Asia is also mainly characterized by its huge population which has become largely urban, a key factor leading to the impressive growth of vegetable oil demand in the past 30 years. At an verage of 23.2 kg/year, Asian per capita consumption of oils and fats still remains slightly below the world average of 28.3 kg/capita/year. Therefore, although 53% of the world population is located in Asia, only 45% of world oils and fats is consumed in the region. As detailed in the paper, the world of Asian oilseeds and vegetable oils is highly concentrated on soybeans and palm oil. In spite of a large domestic production in China (12.3 MnT, soybeans are imported in huge quantities, mostly by China (78 MnT, 84% of the region’s imports where more than 28% of world soybeans production is being crushed. Palm oil, the second large commodity consumed in the region, is mainly produced within the region, mostly in Indonesia and Malaysia. So where is the “world of diversity”? Hidden behind those two dominant commodities, practically all of the ten oilseeds constituting the core of the world production are grown in significant quantities in the region while, for vegetable oils, all those of significant importance are produced within the region with the exception of olive oil. The main question that should be kept in mind when reviewing this large regional demand is under what condition will future vegetable oil production be able to meet the expected rise of per capita oils and

  4. The potential of the Malaysian oil palm biomass as a renewable energy source

    International Nuclear Information System (INIS)

    Loh, Soh Kheang

    2017-01-01

    Highlights: • An energy resource data for oil palm biomass is generated. • The data encompasses crucial fuel and physicochemical characteristics. • These characteristics guide on biomass behaviors and technology selection. • Oil palm biomass is advantageous in today’s energy competitive markets. • Overall, it is a green alternative for biorefinery establishment. - Abstract: The scarcity of conventional energy such as fossil fuels (which will lead to eventual depletion) and the ever-increasing demand for new energy sources have resulted in the world moving into an era of renewable energy (RE) and energy efficiency. The Malaysian oil palm industry has been one of the largest contributor of lignocellulosic biomass, with more than 90% of the country’s total biomass deriving from 5.4 million ha of oil palms. Recent concerns on accelerating replanting activity, improving oil extraction rate, expanding mill capacity, etc. are expected to further increase the total oil palm biomass availability in Malaysia. This situation has presented a huge opportunity for the utilization of oil palm biomass in various applications including RE. This paper characterizes the various forms of oil palm biomass for their important fuel and other physicochemical properties, and assesses this resource data in totality – concerning energy potential, the related biomass conversion technologies and possible combustion-related problems. Overall, oil palm biomass possesses huge potential as one of the largest alternative energy sources for commercial exploitation.

  5. Express method for determining productivity of deposits

    Energy Technology Data Exchange (ETDEWEB)

    Bobrovnik, M D; Gurzhiy, D V

    1980-01-01

    It is indicated that the practice of studying cross sectional views in the Ciscarpathian oil and gas province demonstrated the existence of a direct link between productivity of deposits and the degree of transformation of bitumens in rock. The bituminous matter which fills the micropores and microfractures in rocks in the productive part of the section have light tones of brown color, in the transcontour part of the field it is dark brown and black. In the water-bearing part of the section, oxidized bitumens are noted in the rock jointly with iron hydroxides. This law can be used to correct the conclusions, data on field geophysics, productivity of deposits.

  6. About peculiarities of hydrocarbons deposits location in the productive series of the Baku archipelago area

    International Nuclear Information System (INIS)

    Gasanov, V.T.

    2002-01-01

    Full text : In Azerbaijan domestic and foreign companies hold wide-scaled prospecting operations in the central and southern parts of the Baku Archipelago and also in the Kobystan. There are hydrocarbons deposits determined in the northern of the Baku Archipelago. Deposits location by phase condition of hydrocarbons mainly follows the general regularity determined on many oil and gas bearing areas, pass of oil deposits to oil-gas and gas-condensate ones in the direction of increase of layers occurrence depth. There is also a considerable influence of a tectonic factor on the area location of deposits observed, expressing in difference of deposits height on different tectonic blocks and also there is an influence of a lithological factor. Results of works conducted on drilling and wells testing are still not enough for judging about lack of oil and gas content.

  7. Myristica oil poisoning

    Science.gov (United States)

    Nutmeg oil; Myristicin ... Myristica oil ( Myristica fragrans ) can be harmful. It comes from the seed of a nutmeg. ... Myristica oil is found in: Aromatherapy products Mace Nutmeg Other products may also contain myristica oil.

  8. Oil palm plantations in Indonesia: The implications for migration, settlement/resettlement and local economic development

    NARCIS (Netherlands)

    Budidarsono, S.; Susanti, A.; Zoomers, E.B.

    2013-01-01

    5. Concluding remarks It is not difficult for policy makers to show that oil palms are an economically rentable crop with a huge potential for further economic growth. In addition to national demands, the growing worldwide interest in biofuels as an alternative to fossil fuels will increase demand

  9. Purifying oils

    Energy Technology Data Exchange (ETDEWEB)

    1930-04-15

    Gasoline, lamp oils, and lubricating or other mineral or shale oils are refined by contacting the vapor with a hot aqueous solution of salts of zinc, cadmium, or mercury, or mixtures thereof which may contain 0-5-3-0 percent of oxide or hydroxide in solution or suspension. Chlorides, bromides, iodides, sulfates, nitrates, and sulfonates of benzol, toluol, xylol, and petroleum are specified. Washing with a solution of sodium or potassium hydroxide or carbonate of calcium hydroxide may follow. The oil may first be purified by sulfuric acid or other known agent, or afterwards caustic alkali and sulfuric acid. The Specification as open to inspection under Sect. 91 (3) (a) describes also the use of salts of copper, iron, chromium, manganese, aluminum, nickel, or cobalt, with or without their oxides or hydroxides. This subject-matter does not appear in the Specification as accepted.

  10. Distilling oils

    Energy Technology Data Exchange (ETDEWEB)

    Leffer, L G

    1912-01-29

    In a process for converting heavy hydrocarbons, such as petroleum or shale oil, into light hydrocarbons by distilling under the pressure of an inert gas, the operation is conducted at a temperature not exceeding 410/sup 0/C and under an accurately regulated pressure, the gas being circulated through the still and the condenser by means of a pump. The oil in the still may be agitated by stirring vanes or by blowing the gas through it. Hydrogen, nitrogen, carbon dioxide, methane, or gases generated in the distillation may be used as pressure media; the gas is heated before its admission to the still. A pressure of from 11 to 12 atmospheres is used in treating gas oil. Specification 10,277/89 is referred to.

  11. Histograms showing variations in oil yield, water yield, and specific gravity of oil from Fischer assay analyses of oil-shale drill cores and cuttings from the Piceance Basin, northwestern Colorado

    Science.gov (United States)

    Dietrich, John D.; Brownfield, Michael E.; Johnson, Ronald C.; Mercier, Tracey J.

    2014-01-01

    Recent studies indicate that the Piceance Basin in northwestern Colorado contains over 1.5 trillion barrels of oil in place, making the basin the largest known oil-shale deposit in the world. Previously published histograms display oil-yield variations with depth and widely correlate rich and lean oil-shale beds and zones throughout the basin. Histograms in this report display oil-yield data plotted alongside either water-yield or oil specific-gravity data. Fischer assay analyses of core and cutting samples collected from exploration drill holes penetrating the Eocene Green River Formation in the Piceance Basin can aid in determining the origins of those deposits, as well as estimating the amount of organic matter, halite, nahcolite, and water-bearing minerals. This report focuses only on the oil yield plotted against water yield and oil specific gravity.

  12. The Environmental Challenges for the Oil Industry

    International Nuclear Information System (INIS)

    Del Manso, F.

    1998-01-01

    Oil has been and will continue to be indispensable to assure the growth of the world economy, but it is also responsible to have an impact on the environment. One of the most important challenges for the future, in particular for the oil sector, is to make this growth sustainable for the environment. To do this, refineries must plan a huge amount of investments for the next future to modify substantially their industrial structures to reformulate transportation fuels (diesel and gasoline) to comply the new limits for the emissions generated during the production and distribution of oil products and to apply new safety rules in order to improve the compatibility of the refineries with the territory. To fulfil all this actions the oil sector will have to face very high costs without any certainty of the return of investments, due to the extreme uncertainty to forecast the future oil demand in Italy after the Kyoto Protocol. To be ready within the year 2005, Italian refineries must decide now to invest, but they are not sure to have a market in the future for the products that they are going to produce [it

  13. Economical Atomic Layer Deposition

    Science.gov (United States)

    Wyman, Richard; Davis, Robert; Linford, Matthew

    2010-10-01

    Atomic Layer Deposition is a self limiting deposition process that can produce films at a user specified height. At BYU we have designed a low cost and automated atomic layer deposition system. We have used the system to deposit silicon dioxide at room temperature using silicon tetrachloride and tetramethyl orthosilicate. Basics of atomic layer deposition, the system set up, automation techniques and our system's characterization are discussed.

  14. Oil integration

    International Nuclear Information System (INIS)

    Carta Petrolera

    1997-01-01

    Colombia, Mexico and Venezuela agree in to have a bigger exchange of information, technology and experiences in areas of mutual interest that allow in the future, combined developments of the hydrocarbons industry. In such a sense, ECOPETROL narrowed its relationships with the two powerful Latin American oil enterprises, when suiting in Bogota agreements of mutual collaboration with representatives of the respective state companies. To begin, the company signed a cooperation agreement with Petroleos de Venezuela S.A (PDVSA), with the purpose of to narrow the relationships between the two companies and to undertake combined actions in those matters of the oil and petrochemical industry of mutual interest

  15. Application potential of sequence stratigraphy to prospecting for sandstone-type uranium deposit in continental depositional basins

    International Nuclear Information System (INIS)

    Li Shengxiang; Chen Zhaobo; Chen Zuyi; Xiang Weidong; Cai Yuqi

    2001-01-01

    Sequence stratigraphy has been widely used in hydrocarbon exploration and development, and great achievements have been achieved. However, its application to the prospecting for sandstone-type uranium deposits is just beginning. The metallogenic characteristics of sandstone-type uranium deposits and those of oil and gas are compared, and the relationship between sandstone-type uranium metallogenesis and the system tracts of sequence stratigraphy is studied. The authors propose that highest and system tracts are the main targets for prospecting interlayer oxidation zone type sandstone uranium deposits, and the incised valleys of low stand system tracts are favourable places for phreatic oxidation zone type sandstone uranium deposits, and transgressive system tracts are generally unfavorable to the formation of in-situ leachable sandstone-type uranium deposits. Finally, the authors look ahead the application potential of sequence stratigraphy to the prospecting for sandstone-type uranium deposits in continental depositional basins

  16. Geophysical mapping of the occurrence of shallow oil sands in ...

    African Journals Online (AJOL)

    Oil sands are known to be an alternate source of energy and of great economic value. To map the occurrence of shallow oil sand deposits in Idiopopo, Okitipupa area in Ondo state southwestern Nigeria, vertical electric sounding (VES) in 11 stations along 3 profiles were carried out using the Schlumberger configuration.

  17. CRUDE OIL TRANSPORT FROM THE CASPIAN SEA REGION TO EUROPE

    Directory of Open Access Journals (Sweden)

    Adam Przybyłowski

    2014-07-01

    Full Text Available In the contemporary world, despite the growing importance and scale of the use of renewable energy , conventional energy resources still play a huge role. The European Union countries are dependent on the oil imports and the their main supplier of crude oil and natural gas has been the Russian Federation. After the collapse of the Soviet Union , the Caspian Sea region has become an alternative to Russian energy resources. The Unit-ed States , European Union, China and many other countries have shown their interest about this region. Despite a relatively large oil and natural gas reserves, the export of the-se commodities to the West is still problematic. Based on the available data and infor-mation, the publication explores the issue of energy resources transport directions with a particular emphasis on the crude oil from the Caspian Sea region to Europe.

  18. The Netherlands: development of oil and gas reserves

    International Nuclear Information System (INIS)

    1993-01-01

    Oil was first discovered in The Netherlands in the late 1930s near The Hague. Later the larger onshore field at Schoonebeek was found. In the 1960s significant resources of oil were discovered in the Dutch sector of the North Sea. However onshore oil still provides about 20% of the nation's requirements. In the 1960s the vast size of the onshore Groningen gas field became apparent and its subsequent development has provided the Dutch with a huge source of wealth. In recent years the Dutch Continental Shelf has also yielded substantial reserves of gas, although these are not yet as important as the onshore gas reserves. Dutch Government policy is designed to encourage the development of smaller offshore gas fields thereby conserving the Gronigen field. Dutch oil and gas production, licensing and drilling activities are discussed, and the prospects for British suppliers is considered. (author)

  19. Pyrolysis oil from carbonaceous solid wastes in Malaysia

    International Nuclear Information System (INIS)

    Islam, M.N.; Jamil, M.K.; Ani, F.N.; Zailani, R.

    2000-01-01

    The agro-industrial sector of Malaysia produces a huge amount of oil palm and paddy rice. These generate a significant amount of renewable biomass solid wastes in the forms of oil palm shell and rice husk. Apart from this a huge quantity of scrap tyre is generated from the country's faster increasing usage of transportation vehicles like motorcycle, car, bus and lorries. These wastes are producing pollution and disposal problems affecting the environment. Besides energy is not recovered efficiently from these waste resources. From the elemental composition and thermogravimetric analysis (TGA) studies of the wastes, it appeared that the wastes could be used for pyrolysis liquid oil production. Pyrolysis at present is deemed to be a potential method for the conversion of carbonaceous solid wastes into upgraded liquid products which can either be tried for liquid fuel or value-added chemical. A fluidized bed bench scale fast pyrolysis system was employed for this thermochemical conversion process of solid wastes. Silica sand was used as fluidized bed material and nitrogen gas as the fluidising medium. The products obtained were liquid oil, solid char and gas. The liquid oil and solid char were collected separately while the gas was flared. The maximum liquid product yield was found to vary with feedstock material fluidized bed temperature. The maximum liquid product yield was found to be 58, 53 and 40 wt. % of biomass fed at fluidized bed temperature at 500, 525 and 450 0 C respectively for oil palm shell, scrap tyre and rice husk. The solid char yield was 25, 36 and 53 wt. % of biomass fed at the condition of maximum liquid product yield for oil palm shell, scrap tyre and rice husk respectively. The oil products were subjected to FTIR, GC and GC/MS analysis for their group composition and detailed chemical compositions. The pyrolysis oil from scrap tyre was found to contain highest percentage of pure hydrocarbons (25 wt. % of total feed) with esters and oxygenated

  20. Effects of pollution from oil shale mining in Estonia

    International Nuclear Information System (INIS)

    Vallner, L.; Sepp, K.

    1993-01-01

    The largest commercially exploited oil shale deposit in the world is in northeast Estonia. The accumulation of solid residues by oil shale mines and processing plants has resulted in numerous dumps and ash hills, which are polluting the environment. The groundwater and streams are highly polluted by sulphates, phenols and oil products. A dump hill of radioactive wastes poses a serious threat to the Baltic Sea. Local people suffer from diseases more often than in other regions of Estonia. (author)

  1. The oil industry in 2007

    International Nuclear Information System (INIS)

    2008-01-01

    The various contributions present and comment many data about the evolutions of different parts of the oil industry until 2007: world oil and gas markets, worldwide oil exploration and production, oil exploration and production in France, oil and oil-related industry in France, hydrocarbon supplies, oil refining in France, fuel quality, substitution fuels, inner transportation of oil products, storage of oil products, consumption of oil products, taxing of oils products, price of oil products, distribution of oil products

  2. The oil industry in 2006

    International Nuclear Information System (INIS)

    2007-01-01

    The various contributions present and comment many data about the evolutions of different parts of the oil industry until 2006: world oil and gas markets, worldwide oil exploration and production, oil exploration and production in France, oil and oil-related industry in France, hydrocarbon supplies, oil refining in France, fuel quality, substitution fuels, inner transportation of oil products, storage of oil products, consumption of oil products, taxing of oils products, price of oil products, distribution of oil products

  3. Online estimation of wax deposition thickness in single-phase sub-sea pipelines based on acoustic chemometrics: A feasibility study

    OpenAIRE

    Halstensen, Maths; Arvoh, Benjamin Kaku; Amundsen, Lene; Hoffmann, Rainer

    2012-01-01

    Wax deposition in sub-sea oil producing pipelines is a concern to the oil producing companies. The deposition of wax in pipelines can cause serious economic implications if not monitored and controlled. Several researchers have developed models and investigated the deposition of wax in crude oil pipelines. As of today, there is no off the shelf instrument available for reliable online estimation of the wax depo- sition thickness in sub-sea pipelines. Acoustic chemometrics was applied to inves...

  4. Application of Rock-Eval pyrolysis to the detection of hydrocarbon property in sandstone-type uranium deposits

    International Nuclear Information System (INIS)

    Sun Ye; Li Ziying; Guo Qingyin; Xiao Xinjian

    2006-01-01

    Rock-Eval pyrolysis is introduced into the research of uranium geology by means of oil-gas geochemical evaluation. Hydrocarbon (oil-gas) components in DS sandstone-type uranium deposit are detected quantitatively. Through analyzing the oil-gas bearing categories of the uranium-bearing sandstones, the internal relationships between the uranium deposit and the oil-gas are revealed. Rock-Eval pyrolysis is an effective method to study the interaction between inorganic and organic matters, and should be extended to the study of sandstone-type uranium deposits. (authors)

  5. Risk analysis in oil spill response planning

    International Nuclear Information System (INIS)

    Chernoplekov, A.N.; Alexandrov, A.A.

    2005-01-01

    Tiered response is a basic approach to emergency plans, including oil spill response (OSR). This paper delineates a huge set of accidental scenarios within a certain tier of response generated by a computer during risk assessment. Parameters such as the amount of oil spilled, duration of discharge and types of losses should be provided in OSR scenarios. Examples of applications include offshore installations, sub sea or onshore pipelines, and localized onshore facilities. The paper demonstrates how to use risk analysis results for delineating all likely spills into groups that need a specific tier response. The best world practices and Russian regulatory approaches were outlined and compared. Corresponding algorithms were developed and their application in pipelines was presented. The algorithm combines expert's skills and spill trajectory modeling with the net environmental benefit analysis principle into the incident specific emergency response planning. 9 refs., 13 tabs., 2 figs

  6. ECOLOGY SAFETY TECHNOLOGIES OF UNCONVENTIONAL OIL RESERVES RECOVERY FOR SUSTAINABLE OIL AND GAS INDUSTRY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Viacheslav Zyrin

    2016-09-01

    Full Text Available The problem of effective technology for heavy oil recovery nowadays has a great importance, because of worsening geological conditions of the developed deposits, decreasing recovery factor, increasing the part of heavy oil. For the future sustainable development of oil producing industry the involved technologies must require energy effectiveness and ecological safety. The paper proves the enhanced oil recovery methods necessity for heavy oil deposits, highlighted thermal technologies as the most effective. But traditional thermal treatment technologies is a source of air pollutant emission, such as CO, NO etc. The calculation of emissions for traditional steam generator is provided. Besides, the paper shows the effectiveness of electrical enhanced oil recovery methods. The advantages of associated gas as a fuel for cogeneration plants is shown. The main approaches to implementation of carbon dioxide sequestration technologies in the oil and gas industry of Russia are defined. Conceptual view of СО2-EOR technologies potential within the context of sustainable development of oil and gas industry are presented. On the basis of the conducted research a number of scientific research and practical areas of the CCS technology development are revealed.

  7. Oil spills

    International Nuclear Information System (INIS)

    Spaulding, M.L.; Reed, M.

    1990-01-01

    Public awareness and concern for the potential short and long term impacts of oil spills on the marine environment has generally been high, particularly for regions of special ecological importance or where significant numbers of marine mammals and birds are present. This awareness was further heightened by the extraordinary number of recent large spills in coastal U.S. water: Exxon Valdez, Alaska; World Prodigy, Rhode Island; Presidente Rivera, Delaware; Rachel-B, Texas and American Trader, California. The occurrence of so many spills in a one year period is unprecedented in U.S. spill history. The legislative response to these spills has been immediate. New legislative initiative are rapidly being developed. Improved ways to organize spill response efforts are being devised and implemented. Funds are being allocated to further develop and improve spill response equipment and damage assessment methodologies. These spill events will have a significant impact in both the short and long term on oil exploration, development and transport in marine waters. They will result in major changes in management and operation of oil exploration and development. The purpose of this conference was to provide a forum for discussion of the changes which are currently taking place in oil spill legislation, management, and response strategies

  8. Coconut Oil

    Science.gov (United States)

    ... known as "medium chain triglycerides." Some of these fats work differently than other types of saturated fat in the body. When applied ... in food amounts. But coconut oil contains a type of fat that can increase cholesterol levels. So people should ...

  9. LINNAEUS OIL

    African Journals Online (AJOL)

    eobe

    Crude jatropha oil; Heterogeneous catalyst; Transesterification ... mmage for alternative fuel ... be designed to give higher activity and lifetimes [13]. So, the need for a cheap catalyst for biodiesel synthesis from no ... methanol (High Performance Liquid Chromatography ... ratio and were then charged into the glass reactor.

  10. USSR: World Oil Report 1991

    International Nuclear Information System (INIS)

    Hovring, M.

    1991-01-01

    This paper reports that due to its lack of technology, the Soviet Union will have to double the number of wells it drills in the next five years in order to maintain today's oil output. It has been estimated that more than 11,000 new wells will have to be drilled in 1992 because of the declines in reserves and productivity per well. The only problem with this is that the USSR does not have the required funds at present. The Soviet Government has agreed to a 25-billion-rouble ($46 billion) cash injection for the oil industry to halt declining production. The USSR will need to find major new deposits to develop. There is oil in the exceptionally difficult geological conditions in Soviet central Asia and northern Siberia. However, the oil is located in hundreds of small fields. The only solution is to let international oil companies take part in development of production of these fields in order to raise the standard of technology employed

  11. Sustainable use of oil sands for geotechnical construction and road building

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2012-02-01

    Full Text Available Oil sands are natural deposits of bituminous sand materials that are mined and processed for crude oil. They are routinely used in oil sand fields for building temporary and sometimes permanent roads serving mining and hauling activities. Although...

  12. Oil sands from Sao Paulo State, Brazil and La Brea de Chumpi, Peru: a geologic perspective

    Energy Technology Data Exchange (ETDEWEB)

    Kramers, John W [Alberta Research Council, Edmonton, AB (Canada); Santos, Paulo R. dos [Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil); Gianello, Pedro T [Petroleos del Peru, Lima (Peru)

    1987-12-31

    This work describes two `non-conventional` oil sands occurrences in Peru and Brazil. The study of such occurrences has pointed out the fact that oil sands are found in widely varying geological situations and that not all oil sands have origins similar to the supergiant `conventional` deposits in Canada and Venezuela. 3 refs., 9 figs.

  13. Oil and ice in the arctic ocean: possible large-scale interactions.

    Science.gov (United States)

    Campbell, W J; Martin, S

    1973-07-06

    The diffusion and transport mechanisms generated by the pack ice dynamics of the Beaufort Sea, combined with the slow rate of biodegradation of oil under Arctic conditions, would combine to diffuse an oil spill over the sea and eventually deposit the oil on the ice surface, where it would lower the natural albedo over a large area.

  14. New understanding in genesis of uranium deposit Bashblak in tarim basin

    International Nuclear Information System (INIS)

    Qin Mingkuan; Zhao Ruiquan

    2000-01-01

    Using metallogenic theory of hydrogenic uranium deposit and theory of oil-gas reduction, the author makes a re-recognition of the metallogenic mechanism of the biggest uranium deposit in Tarim basin--uranium deposit Bashblak in order to give some reference guide in the prospecting for in-situ leachable sandstone-type uranium deposits in the biggest intra-continental basin in China--Tarim basin

  15. Biodiesel production from Jatropha curcas oil

    Energy Technology Data Exchange (ETDEWEB)

    Jain, Siddharth; Sharma, M.P. [Alternate Hydro Energy Centre, Indian Institute of Technology Roorkee, Roorkee, Uttarakhand 247667 (India)

    2010-12-15

    In view of the fast depletion of fossil fuel, the search for alternative fuels has become inevitable, looking at huge demand of diesel for transportation sector, captive power generation and agricultural sector, the biodiesel is being viewed a substitute of diesel. The vegetable oils, fats, grease are the source of feedstocks for the production of biodiesel. Significant work has been reported on the kinetics of transesterification of edible vegetable oils but little work is reported on non-edible oils. Out of various non-edible oil resources, Jatropha curcas oil (JCO) is considered as future feedstocks for biodiesel production in India and limited work is reported on the kinetics of transesterification of high FFA containing oil. The present study reports a review of kinetics of biodiesel production. The paper also reveals the results of kinetics study of two-step acid-base catalyzed transesterification process carried out at pre-determined optimum temperature of 65 and 50 C for esterification and transesterification process, respectively, under the optimum condition of methanol to oil ratio of 3:7 (v/v), catalyst concentration 1% (w/w) for H{sub 2}SO{sub 4} and NaOH and 400 rpm of stirring. The yield of methyl ester (ME) has been used to study the effect of different parameters. The maximum yield of 21.2% of ME during esterification and 90.1% from transesterification of pretreated JCO has been obtained. This is the first study of its kind dealing with simplified kinetics of two-step acid-base catalyzed transesterification process carried at optimum temperature of both the steps which took about 6 h for complete conversion of TG to ME. (author)

  16. E-government factors to reduce administrative and finance corruption in Arab countries: Case study Iraqi oil sector

    Science.gov (United States)

    Mohammed, M. A.; Eman, Y.; Hussein, A. H.; Hasson, A. R.

    2015-12-01

    Arab countries face the corruption issues in its several public organizations. The corruption in these countries is considered as the main challenge. The oil sector is one of the public sectors that have huge level of corruption. However, the Iraqi economy had become dependable on oil sector daring the last three decades, and on the contrary, of what other oil countries did. The capital is considered as one of the essential factor for economic development. The revenues of oil exports will stay the essential source for economic development in Iraq in the future in order to reduce being dependable on oil. Since the beginning of the 3rd thousands, the world witnessed great rise in the demand on oil, but the Iraqi exports of crude oil come to be less than its similarities in the seventeenths of last century. So our oil sector is still in need of deep study. This study focuses on technological technique that can make huge decrease for corruption in oil sector in Iraq. However, e-government is considered as the best techniques that can decrease the corruption. Thus, this study bases on challenges that effect on build successful e-government project in Iraqi oil industry.

  17. Superhydrophobic Cu{sub 2}S@Cu{sub 2}O film on copper surface fabricated by a facile chemical bath deposition method and its application in oil-water separation

    Energy Technology Data Exchange (ETDEWEB)

    Pi, Pihui, E-mail: phpi@scut.edu.cn; Hou, Kun; Zhou, Cailong; Li, Guidong; Wen, Xiufang; Xu, Shouping; Cheng, Jiang; Wang, Shuangfeng

    2017-02-28

    Highlights: • A superhydrophobic film with macro/nano structure was fabricated on copper surface. • The as-prepared film shows outstanding water repellency and long-term storage stability. • The same method was used to fabricate superhydrophobic/superoleophilic copper mesh. • The obtained mesh could realize separation of various oily sewages with separation efficiency above 94%. - Abstract: Cu{sub 2}S and Cu{sub 2}O composite (Cu{sub 2}S@Cu{sub 2}O) film with micro/nano binary structure was created on copper surface using the mixing solution of sodium thiosulphate and copper sulfate by a facile chemical bath deposition method. After modification with low-cost polydimethylsioxane (PDMS), the superhydrophobic Cu{sub 2}S@Cu{sub 2}O film was obtained. The as-prepared film shows outstanding water repellency with a water contact angle larger than 150° and long-term storage stability. The geometric morphology and chemical composition of the film were characterized by scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), respectively. Moreover, the same method was used to fabricate superhydrophobic/superoleophilic copper mesh, and it could realize separation of various oily sewages with separation efficiency above 94%. This strategy has potential to fabricate the practical superhydrophobic Cu{sub 2}S@Cu{sub 2}O film on copper surface on a large scale due to its simplicity and low cost.

  18. Electro-Deposition Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The electro-deposition laboratory can electro-deposit various coatings onto small test samples and bench level prototypes. This facility provides the foundation for...

  19. Atmospheric Deposition Modeling Results

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset provides data on model results for dry and total deposition of sulfur, nitrogen and base cation species. Components include deposition velocities, dry...

  20. Calcium Pyrophosphate Deposition (CPPD)

    Science.gov (United States)

    ... Patient / Caregiver Diseases & Conditions Calcium Pyrophosphate Deposition (CPPD) Calcium Pyrophosphate Deposition (CPPD) Fast Facts The risk of ... young people, too. Proper diagnosis depends on detecting calcium pyrophosphate crystals in the fluid of an affected ...

  1. The Pulsed Cylindrical Magnetron for Deposition

    Science.gov (United States)

    Korenev, Sergey

    2012-10-01

    The magnetron sputtering deposition of films and coatings broadly uses in microelectronics, material science, environmental applications and etc. The rate of target evaporation and time for deposition of films and coatings depends on magnetic field. These parameters link with efficiency of gas molecules ionization by electrons. The cylindrical magnetrons use for deposition of films and coatings on inside of pipes for different protective films and coatings in oil, chemical, environmental applications. The classical forming of magnetic field by permanent magnets or coils for big and long cylindrical magnetrons is complicated. The new concept of pulsed cylindrical magnetron for high rate deposition of films and coating for big and long pipes is presented in this paper. The proposed cylindrical magnetron has azimuthally pulsed high magnetic field, which allows forming the high ionized plasma and receiving high rate of evaporation material of target (central electrode). The structure of proposed pulsed cylindrical magnetron sputtering system is given. The main requirements to deposition system are presented. The preliminary data for forming of plasma and deposition of Ta films and coatings on the metal pipers are discussed. The comparison of classical and proposed cylindrical magnetrons is given. The analysis of potential applications is considered.

  2. Comparison of China's oil import risk. Results based on portfolio theory and a diversification index approach

    International Nuclear Information System (INIS)

    Wu, Gang; Liu, Lan-Cui; Wei, Yi-Ming

    2009-01-01

    In recent years, the international oil price has fluctuated violently, bringing about huge risk for the international oil trade. In fact, the risk of crude oil and petroleum product imports is different because of the different import origins and prices. Which import risk is lower for China? From the perspective of oil supply security, how should China portfolio crude oil and petroleum product imports to minimize its oil import risk? Using portfolio theory and a diversification index approach, this paper compares and analyzes the supply, price and transport risks of crude oil and petroleum product imports. Our results show that the following: (1) Specific risk (diversification risk) and marine transport risk of China's petroleum product imports are lower than that of crude oil imports. (2) The average rate of return of China's petroleum product imports is higher than that of crude oil imports. Moreover, the average import price variance of petroleum product imports is lower than that of crude oil imports. Thus, the systematic risk (price risk) of petroleum products is lower too. Therefore, from the perspective of oil supply security, China should increase petroleum product imports to decrease its oil import risk. (author)

  3. Extracting oils

    Energy Technology Data Exchange (ETDEWEB)

    Patart, G

    1926-03-15

    In the hydrogenation or extraction of by-products from organic substances at high temperatures and pressures, the gases or liquids, or both, used are those which are already heated and compressed during industrial operations such as exothermic synthesizing reactions such as the production of methanol from hydrogen and carbon monoxide in a catalytic process. Gases from this reaction may be passed upwardly through a digester packed with pine wood while liquid from the same catalytic process is passed downwardly through the material. The issuing liquid contains methanol, pine oil, acetone, isopropyl alcohol, and acetic acid. The gases contain additional hydrogen, carbon monoxide, methane, ethylene, and its homologs which are condensed upon the catalyser to liquid hydrocarbons. Petroleum oils and coal may be treated similarly.

  4. Tomatoes in oil recovery. [Plant waste additives improve yield

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The waste from processing tomato, squash and pepper stalks found unexpected use in recovery of oil. Even a negligible amount thereof in an aqueous solution pumped into an oil-bearing formation turned out to be sufficient to increase the yield. Substances of plant origin, which improve dramatically the oil-flushing properties of water, not only increase the recovery of oil, but reduce the volume of fluid to be pumped into the stratum. The staff of the Institute of Deep Oil and Gas Deposits of the Azerbaijan Academy of Sciences, who proved the technological and economical advantages of using the waste from plant processing, transmitted their findings to the oil workers of Baku. The scientists have concluded that there is a good raw material base in this republic for utilizing this method on oil-bearing formations.

  5. Multi-interface Level Sensors and New Development in Monitoring and Control of Oil Separators

    Directory of Open Access Journals (Sweden)

    Wuqiang Yang

    2006-04-01

    Full Text Available In the oil industry, huge saving may be made if suitable multi-interface levelmeasurement systems are employed for effectively monitoring crude oil separators andefficient control of their operation. A number of techniques, e.g. externally mounteddisplacers, differential pressure transmitters and capacitance rod devices, have beendeveloped to measure the separation process with gas, oil, water and other components.Because of the unavailability of suitable multi-interface level measurement systems, oilseparators are currently operated by the trial-and-error approach. In this paper someconventional techniques, which have been used for level measurement in industry, and newdevelopment are discussed.

  6. Tailings dewatering in the oil sands

    Energy Technology Data Exchange (ETDEWEB)

    Longo, S.; Labelle, M. [Golder Paste Technology, Sudbury, ON (Canada); Wislesky, I. [Golder Associates Ltd., Calgary, AB (Canada)

    2010-07-01

    Alberta's Directive 074 was established to reduce fluid tailings produced during oil sands extraction processes. This PowerPoint presentation examined some of the dewatering strategies available for oil sands operators and provided recommendations for implementing a dewatering plan. Sites must be evaluated in order to determine their chemistry, mineralogy, and the total quantity of material to be handled. The availability of potential additives must also be considered. Process technologies must be selected in relation to the operator's depositional strategy. Each site will require its own unique dewatering and depositional strategy. Dewatering technologies include thickening; in-line flocculation; centrifuge; co-mingling; and various new technologies such as electro-osmosis. Laboratory testing programs include index tests, primary stream thickening, and mini-pilot plant testing. The performance of various testing formats was evaluated. Thickening and depositional techniques were reviewed. tabs., figs.

  7. Strategies of African national oil companies

    International Nuclear Information System (INIS)

    Auge, Benjamin

    2017-09-01

    The study and comparison of different National Oil Companies (NOC) help understanding the political history of Algeria, Nigeria and Angola. The NOC's role and activities depend on several economic and political aspects. For example, Angolan Sonangol has been the coffer for the Popular Movement of Liberation of Angola (MPLA) party to fund its struggle against the National Union for the Independence of Angola (UNITA) party during civil war. Hence the key role played by this NOC in the past and its continuing key influence today. In Nigeria, The Nigerian National Petroleum Corporation (NNPC) became more and more bureaucratic, its efficiency is questionable as the company became the epicentre of the corruption in the country (several cases regarding billions of dollars have emerged recently). By contrast, Algeria's Sonatrach has accumulated a real know how in exploring and producing oil and gas but several successive laws discouraged private sector investments. Algeria doesn't have the necessary technology for unconventional oil and gas exploration (notably shale oil and gas), neither the funds to develop all its huge geological potential

  8. Chemical process for improved oil recovery from Bakken shale

    Energy Technology Data Exchange (ETDEWEB)

    Shuler, Patrick; Tang, Hongxin; Lu, Zayne [ChemEOR Inc (United States); Tang, Youngchun [Power Environmental Energy Research Institute (United States)

    2011-07-01

    This paper presents the new chemically-improved oil recovery process (IOR) process for Bakken formation reservoirs. A custom surfactant agent can be used in standard hydraulic fracturing treatments in the Bakken to increase oil recovery. The rock formation consists of three members: the lower shale, middle dolostone and the upper shale. The dolostone was deposited as a coastal carbonate during shallower water and the shales were deposited in a relatively deep marine condition. With the widespread advent of horizontal well drilling and large-volume hydraulic fracturing treatments, production from the Bakken has become very active. The experimental results exhibited that specialized surfactant formulations will interact with this mixed oil-wet low permeability middle member to produce more oil. It was also observed that oil recovery by spontaneous imbibition was fast and significant. The best surfactant found in this study is compatible with a common fracture fluid system.

  9. Microbial ecology of methanogenic crude oil biodegradation; from microbial consortia to heavy oil

    Energy Technology Data Exchange (ETDEWEB)

    Head, Ian M.; Maguire, Michael J.; Sherry, Angela; Grant, Russell; Gray, Neil D.; Aitken, Carolyn M.; Martin Jones, D.; Oldenburg, Thomas B.P.; Larter, Stephen R. [Petroleum Research Group, Geosciences, University of Calgary (Canada)

    2011-07-01

    This paper presents the microbial ecology of methanogenic crude oil biodegradation. Biodegraded petroleum reservoirs are one of the most dramatic indications of the deep biosphere. It is estimated that heavy oil and oil sands will account for a considerable amount of energy production in the future. Carbon, a major resource for deep subsurface microorganisms, and energy are contained in large quantities in petroleum reservoirs. The aerobic to anaerobic paradigm shift is explained. A key process for in-situ oil biodegradation in petroleum reservoirs is methanogenesis. New paradigms for in-reservoir crude oil biodegradation are discussed. Variations in anaerobic degradation of crude oil hydrocarbons are also discussed. A graph shows the different patterns of crude oil biodegradation under sulfate-reducing and methanogenic conditions. Alternative anaerobic alkane activation mechanisms are also shown. From the study, it can be concluded that methanogenic crude oil degradation is of global importance and led to the establishment of the world's enormous heavy oil deposits.

  10. Backtrack modeling to locate the origin of tar balls depositing along the west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Suneel, V.; Ciappa, A.; Vethamony, P.

    spills in the Gulf of Mexico, oil stranded in supra-tidal region approximately for three months. In such a situation, as the beach undergoes normal erosional and depositional processes, oil residues would either be buried or exposed. Some of the oil.... 36(2), April 2013, pp 179 - 194. 19. Michel, J., Owens, E. H., Zengel, S., Graham, A., Nixon, Z. Extent and degree of shoreline oiling: Deepwater Horizon oil spill, Gulf of Mexico, USA. PLoS ONE, 2013, 8(6), e65087. doi:10.1371/journal...

  11. Multiple huge epiphrenic esophageal diverticula with motility disease treated with video-assisted thoracoscopic and hand-assisted laparoscopic esophagectomy: a case report

    OpenAIRE

    Taniguchi, Yoshiki; Takahashi, Tsuyoshi; Nakajima, Kiyokazu; Higashi, Shigeyoshi; Tanaka, Koji; Miyazaki, Yasuhiro; Makino, Tomoki; Kurokawa, Yukinori; Yamasaki, Makoto; Takiguchi, Shuji; Mori, Masaki; Doki, Yuichiro

    2017-01-01

    Background Epiphrenic esophageal diverticulum is a rare condition that is often associated with a concomitant esophageal motor disorder. Some patients have the chief complaints of swallowing difficulty and gastroesophageal reflux; traditionally, such diverticula have been resected via right thoracotomy. Here, we describe a case with huge multiple epiphrenic diverticula with motility disorder, which were successfully resected using a video-assisted thoracic and laparoscopic procedure. Case pre...

  12. Acid Deposition Phenomena

    International Nuclear Information System (INIS)

    Ramadan, A.E.K.

    2004-01-01

    Acid deposition, commonly known as acid rain, occurs when emissions from the combustion of fossil fuels and other industrial processes undergo complex chemical reactions in the atmosphere and fall to the earth as wet deposition (rain, snow, cloud, fog) or dry deposition (dry particles, gas). Rain and snow are already naturally acidic, but are only considered problematic when less than a ph of 5.0 The main chemical precursors leading to acidic conditions are atmospheric concentrations of sulfur dioxide (SO 2 ) and nitrogen oxides (NO x ). When these two compounds react with water, oxygen, and sunlight in the atmosphere, the result is sulfuric (H 2 SO 4 ) and nitric acids (HNO 3 ), the primary agents of acid deposition which mainly produced from the combustion of fossil fuel and from petroleum refinery. Airborne chemicals can travel long distances from their sources and can therefore affect ecosystems over broad regional scales and in locations far from the sources of emissions. According to the concern of petroleum ministry with the environment and occupational health, in this paper we will discussed the acid deposition phenomena through the following: Types of acidic deposition and its components in the atmosphere Natural and man-made sources of compounds causing the acidic deposition. Chemical reactions causing the acidic deposition phenomenon in the atmosphere. Factors affecting level of acidic deposition in the atmosphere. Impact of acid deposition. Procedures for acidic deposition control in petroleum industry

  13. Intensification of transferring the Kazakhstan high-congealed oil: challenges and advances

    Energy Technology Data Exchange (ETDEWEB)

    Maimakov, Tayhan P.; Boiko, Galinal; Lyubchenko, Nina P. [High education institute «UNAT», Almaty (Kazakhstan); Shaihutdinov, Yerengaip M. [Kazakh national technical university, Almaty (Kazakhstan)

    2008-07-01

    It were investigated the rheohgica! parameters of South-Turgay region crude oils at presence of novel pour point depressant additive DP-43/2005. It has shown that additive improves pour point and rheohgica; properties of crude oil mixture Kumkol-Akshabidak, inhibits wax deposition and can provide safe conditions of crude oil mixture transportation through pipeline at the cold season of year. Keywords: oil, temperature of fluidity loss, rheology, viscosity, oligomer depressor dopants.

  14. On the prediction of hydroelastic behaviors of a huge floating structure in waves. 2nd Report; Choogata futai no harochu dansei kyodo no suiteiho ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Murai, M.; Kagemoto, H.; Fujino, M. [The University of Tokyo, Tokyo (Japan)

    1997-08-01

    On the hydroelastic behaviors of a huge floating structure, a mutual interaction theory based on the area division method is used for the analysis of a fluid problem and a mode analysis method is used for the analysis of deformation. On the continuous deformation of a floating structure, the structure is considered as a set of partial structures obtained when the plane shape was divided into squares and discretely handled as a series of rigid motions in the small partial structures obtained by dividing the partial structures more finely. The experimental result in a water tank and the distribution method at a singular point were compared on the deformation of the elastic floating structure estimated by calculation based on this formulation. The result showed that the estimation method on the hydroelastic problem proposed in this paper is valid. On the prediction of hydroelastic behaviors of a huge floating structure, various calculation examples indicate that the hydroelastic behavior is not only the relation between the structure length and wavelength, but also that the bending rigidity of a structure is a very important factor. For a huge floating structure in the 5,000 m class, up to shorter wavelength of about {lambda}/L = 1/100 must be investigated. 6 refs., 14 figs., 5 tabs.

  15. Heavy crude oils - From Geology to Upgrading - An Overview

    International Nuclear Information System (INIS)

    Huc, A.Y.

    2010-01-01

    Heavy oils, extra-heavy oils and tar sands are major players for the future of energy. They represent a massive world resource, at least the size of conventional oils. They are found all over the world but Canada and Venezuela together account, by themselves, for more than half of world deposits. They share the same origin as the lighter conventional oils, but their geological fate drove them into thick, viscous tar-like crude oils. Most of them result from alteration processes mediated by microbial degradation. They are characterized by a low content of lighter cuts and a high content of impurities such as sulfur and nitrogen compounds and metals; so, their production is difficult and deployment of specific processes is required in order to enhance their transportability and to upgrade them into valuable products meeting market needs, and honouring environmental requirements. Although these resources are increasingly becoming commercially producible, less than 1% of total heavy crude oil deposits worldwide are under active development. The voluntarily wide scope of this volume encompasses geology, production, transportation, upgrading, economics and environmental issues of heavy oils. It does not pretend to be exhaustive, but to provide an authoritative view of this very important energy resource. Besides presenting the current status of knowledge and technology involved in exploiting heavy oils, the purpose is to provide an insight into technical, economic and environmental challenges that should be taken up in order to increase the efficiency of production and processing, and finally to give a prospective view of the emerging technologies which will contribute to releasing the immense potential reserves of heavy oil and tar deposits. Contents: Part 1. Heavy Crude Oils.1. Heavy Crude Oils in the Perspective of World Oil Demand. 2. Definitions and Specificities. 3. Geological Origin of Heavy Crude Oils. 4. Properties and composition. Part 2. Reservoir Engineering

  16. Investigation of rapeseed oil at Riga Technical University

    International Nuclear Information System (INIS)

    Gudriniece, E.; Strele, M.; Serzhane, R.

    2002-01-01

    Literature data on investigation of rapeseed oil have been summarized, particular attention paid to the investigations carried out at the Riga Technical University (RTU). The results obtained by scientists of the RTU have revealed following opportunities: to produce high-quality rapeseed oil in Latvia; to simplify the refinement procedure of rapeseed oil - to combine the process of hydration with neutralization using local materials, for example, Ca(OH) 2 ; to utilize the absorbents obtained from Latvian clay deposits for the bleaching of rapeseed oil; to organize the production of bio fuel at the experimental factory. (authors)

  17. Comment: Reluctance to trade a risky position in oil market

    International Nuclear Information System (INIS)

    Thomas, M.

    1995-01-01

    The oil industry is re-engineering, restructuring, down-sizing, etc. as part of a draconian effort to reduce costs and enhance profit margins. Benchmarking of corporate results against the competition is in vogue, with a view to challenging performance at every level of management. The bold can do attitude behind today's oil industry revolution in management grinds to a halt when the subject is oil trading. Mention speculation, oil pricing mechanisms, market risk-taking, or derivative instruments, and many in senior management and the corporate boardroom lapse into worried silence. When an oil company finishes restructuring and reconcentrating business direction, setting new investment and performance criteria, it is still left with the huge variable of price. Any corporate management that fails to act aggressively in the trading sector by pursuing the best possible oil price as a buyer or seller isn't living up to its responsibilities to shareholders. This article discusses market retreat, market imperfections, winners and losers, the decision to trade, developing a program and issues currently attracting oil industry attention

  18. Responding to the Sea Empress oil spill

    International Nuclear Information System (INIS)

    Leonard, D.R.P.; Law, R.J.; Kelly, C.A.

    1999-01-01

    The Ministry of Agriculture, Fisheries and Food (MAFF) is a government department which has responsibility in England and in Wales (acting on behalf of the Secretary of State for Wales) for controlling deposits in the sea, including approving the use of dispersants in oil spill response. MAFF also has responsibility in relation to the management of sustainable commercial fish and shellfish fisheries. Following the grounding of the tanker Sea Empress on 15 February 1996, over 72,000 tonnes of crude oil and bunker fuel was lost. This paper summarises the involvement of MAFF staff in the response phase, and in the subsequent assessment of the environmental impact of the oil spill and the associated clean up operations on commercial fisheries. After two and a half years of environmental monitoring and complementary research, it is concluded that the oil spill has had an insignificant impact on these fisheries beyond their closure during the incident response phase. Suggestions for further work are discussed. (author)

  19. Governance of Oil in Africa: Unfinished Business

    International Nuclear Information System (INIS)

    Lesourne, J.; Ramsay, W.C.; Guichaoua, Y.; Shaxson, N.; Magrin, G.; Geert van, Vliet; Auge, B.

    2009-01-01

    A closer inspection of the world's oil and gas resources, tempered by a critical assessment of their accessibility, would lead many investors now focused on Russia and the Middle East to turn their attention to the Caspian Basin. But many of these oil and gas provinces are largely off limits for international investors, or the investment conditions have become so unpredictable that investors are forced to look elsewhere for the oil and gas to meet the world's increasing demand. Even if today's economic crisis has taken the urgency out of today's supply and demand balances, economic recovery will soon reveal the need for ever-increasing investment upstream. Other parts of the world may not hold the huge hydrocarbon resources of the Middle East, but there is considerable opportunity elsewhere. This study is dedicated to sub-Saharan Africa where considerable resources have been found and more is no doubt yet to be discovered. Specifically, the countries of the Gulf of Guinea have long been in the oil business and some are now in the gas business. What have the experiences in the oil and gas sectors of these countries been? How has governance evolved over the years and why have some of these countries been unable to realize the full benefits of their resource endowments? The Gulf of Guinea holds considerable promise for more oil and gas for world markets, but the experiences of the past decades suggest a need for substantial reform. Income distribution,welfare, development are not generally the business of energy companies, but if governments do not see to these basic requirements of their populations, energy companies will not be able to bring those energy commodities to the market. This book includes four chapters that examine how energy, governance, corruption, income distribution, and corporate issues are linked. The IFRI program on European Governance and Geopolitics of Energy hopes this publication will shed light on the role of hydrocarbon production in Africa

  20. Response to heavy, non-floating oil spilled in a Great Lakes river environment: a multiple-lines-of-evidence approach for submerged oil assessment and recovery

    Science.gov (United States)

    Dollhopf, Ralph H.; Fitzpatrick, Faith A.; Kimble, Jeffrey W.; Capone, Daniel M.; Graan, Thomas P.; Zelt, Ronald B.; Johnson, Rex

    2014-01-01

    The Enbridge Line 6B pipeline release of diluted bitumen into the Kalamazoo River downstream of Marshall, MI in July 2010 is one of the largest freshwater oil spills in North American history. The unprecedented scale of impact and massive quantity of oil released required the development and implementation of new approaches for detection and recovery. At the onset of cleanup, conventional recovery techniques were employed for the initially floating oil and were successful. However, volatilization of the lighter diluent, along with mixing of the oil with sediment during flooded, turbulent river conditions caused the oil to sink and collect in natural deposition areas in the river. For more than three years after the spill, recovery of submerged oil has remained the predominant operational focus of the response. The recovery complexities for submerged oil mixed with sediment in depositional areas and long-term oil sheening along approximately 38 miles of the Kalamazoo River led to the development of a multiple-lines-of-evidence approach comprising six major components: geomorphic mapping, field assessments of submerged oil (poling), systematic tracking and mapping of oil sheen, hydrodynamic and sediment transport modeling, forensic oil chemistry, and net environmental benefit analysis. The Federal On-Scene Coordinator (FOSC) considered this information in determining the appropriate course of action for each impacted segment of the river. New sources of heavy crude oils like diluted bitumen and increasing transportation of those oils require changes in the way emergency personnel respond to oil spills in the Great Lakes and other freshwater ecosystems. Strategies to recover heavy oils must consider that the oils may suspend or sink in the water column, mix with fine-grained sediment, and accumulate in depositional areas. Early understanding of the potential fate and behavior of diluted bitumen spills when combined with timely, strong conventional recovery methods can

  1. The Threats from Oil Spills: Now, Then, and in the Future

    Energy Technology Data Exchange (ETDEWEB)

    Jerneloev, Arne (Vienna (Austria)), e-mail: arne.jernelov@chello.at

    2010-07-15

    The recent oil spill from the blown-out well by the name of Macondo, drilled by the ill-fated rig Deepwater Horizon, has many features in common with another blowout in the Mexican Gulf that happened three decades ago. Then the oil gushed out from the Ixtoc I well drilled by the Sedco 135-F semi-submersible rig. In the years between these catastrophes, the source and nature of oil spills have undergone large changes. Huge spills from tankers that ran aground or collided used to be what caught the headlines and caused large ecological damage. The number and size of such accidental spills have decreased significantly. Instead, spills from ageing, ill-maintained or sabotaged pipelines have increased, and places like Arctic Russia, the Niger Delta, and the northwestern Amazon have become sites of reoccurring oil pollution. As for blowouts, there is no clear trend with regard to the number of incidences or amounts of spilled oil, but deepwater blowouts are much harder to cap and thus tend to go on longer and result in the release of larger quantities of oil. Also, oil exploration and extraction is moving into ever deeper water and into stormier and icier seas, increasing potential risks. The risk for reoccurring spills like the two huge Mexican Gulf ones is eminent and must be reduced

  2. Refining oils

    Energy Technology Data Exchange (ETDEWEB)

    Dunstan, A E

    1921-05-12

    The desulfurization of liquid hydrocarbons, such as kerosene, ligroin, or shale oil, by treatment with alkaline hypochlorite, such as sodium hypochlorite with free alkali is preceded, followed or both preceded and followed by treatment with alkali. The treatment may be effected in a vessel in which brine is being electrolyzed for the production of sodium hypochlorite, and the temperature may be raised to say 120/sup 0/F. The product may be filtered through animal charcoal, fuller's earth, dehydrated alumina, or other adsorbent substance.

  3. Wash-oil problem

    Energy Technology Data Exchange (ETDEWEB)

    Chlosta, J

    1941-01-01

    Meier-Grolman and others have deduced from experimental studies of the vapor pressure of solutions of benzene in paraffin oil and Solway oil-paraffin oil mixtures that the higher the proportion of aliphatic compounds in a wash oil, the less suitable it is for benzene scrubbing. This generalization is not supported. Paraffin oils from brown-coal tar and low viscous oils from the Fischer-Tropsch hydrocarbon synthesis process are both being successfully used for benzene scrubbing.

  4. Oil trading manual

    International Nuclear Information System (INIS)

    Long, D.

    1995-01-01

    This manual provides basic information on all aspects of oil trading. Topics reviewed in Part 1 include physical characteristics and refining and oil pricing arrangements. Part 2 on instruments and markets contains chapters on crude oil markets, product markets, forward and futures contracts, forward paper markets, oil future exchanges, options, swaps and long term oil markets. Part 3 deals with administration and has chapters on operations and logistics, credit control, accounting, taxation of oil trading, contracts and legal and regulatory issues. (UK)

  5. Impact of palm biodiesel blend on injector deposit formation

    International Nuclear Information System (INIS)

    Liaquat, A.M.; Masjuki, H.H.; Kalam, M.A.; Fazal, M.A.; Khan, Abdul Faheem; Fayaz, H.; Varman, M.

    2013-01-01

    Highlights: • 250 h Endurance test on 2 fuel samples; diesel fuel and PB20. • Visual inspection of injectors running on DF and PB20 showed deposit accumulation. • SEM and EDS analysis showed less injector deposits for DF compared to PB20 blend. • Engine oil analysis showed higher value of wear particles for PB20 compared to DF. - Abstract: During short term engine operation, renewable fuels derived from vegetable oils, are capable of providing good engine performance. In more extended operations, some of the same fuels can cause degradation of engine performance, excessive carbon and lacquer deposits and actual damage to the engine. Moreover, temperatures in the area of the injector tip due to advanced diesel injection systems may lead to particularly stubborn deposits at and around the injector tip. In this research, an endurance test was carried out for 250 h on 2 fuel samples; DF (diesel fuel) as baseline and PB20 (20% palm biodiesel and 80% DF) in a single cylinder CI engine. The effects of DF and PB20 on injector nozzle deposits, engine lubricating oil, and fuel economy and exhaust emissions were investigated. According to the results of the investigation, visual inspection showed some deposit accumulation on injectors during running on both fuels. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) analysis showed greater carbon deposits on and around the injector tip for PB20 compared to the engine running with DF. Similarly, lubricating oil analysis presented excessive wear metal concentrations, decreased viscosity and increased density values when the engine was fuelled with PB20. Finally, fuel economy and emission results during the endurance test showed higher brake specific fuel consumption (bsfc) and NO x emissions, and lower HC and CO emissions, for the PB20 blend compared to DF

  6. Feasibility study of heavy oil recovery in the Midcontinent region (Kansas, Missouri, Oklahoma)

    Energy Technology Data Exchange (ETDEWEB)

    Olsen, D.K.; Johnson, W.I.

    1993-08-01

    This report is one of a series of publications assessing the feasibility/constraints of increasing domestic heavy oil production. Each report covers a select area of the United States. The Midcontinent (Kansas, Nssouri, Oklahoma) has produced significant oil, but contrary to early reports, the area does not contain the huge volumes of heavy oil that, along with the development of steam and in situ combustion as oil production technologies, sparked the area`s oil boom of the 1960s. Recovery of this heavy oil has proven economically unfeasible for most operators due to the geology of the formations rather than the technology applied to recover the oil. The geology of the southern Midcontinent, as well as results of field projects using thermal enhanced oil recovery (TEOR) methods to produce the heavy oil, was examined based on analysis of data from secondary sources. Analysis of the performance of these projects showed that the technology recovered additional heavy oil above what was produced from primary production from the consolidated, compartmentalized, fluvial dominated deltaic sandstone formations in the Cherokee and Forest City basins. The only projects producing significant economic and environmentally acceptable heavy oil in the Midcontinent are in higher permeability, unconsolidated or friable, thick sands such as those found in south-central Oklahoma. There are domestic heavy oil reservoirs in other sedimentary basins that are in younger formations, are less consolidated, have higher permeability and can be economically produced with current TEOR technology. Heavy oil production from the carbonates of central and wester Kansas has not been adequately tested, but oil production is anticipated to remain low. Significant expansion of Midcontinent heavy oil production is not anticipated because the economics of oil production and processing are not favorable.

  7. Bioavailability of chemically-dispersed crude oil

    International Nuclear Information System (INIS)

    Harris, B.C.; Bonner, J.S.; McDonald, T.J.; Fuller, C.B.; Page, C.A.; Dimitriou-Christidis, P.; Sterling, M.C.; Autenrieth, R.L.

    2002-01-01

    Oil spills can be treated with surfactant compounds to disperse them. This method enables the hydrophobic compounds to overcome their repulsion for water, enter the water phase and be diluted. Once in the water, the biodegradation fraction of the oil biodegrades over time and the residual fraction is deposited over a large area. One major issue which is not fully understood is whether oil compounds pass through the water phase to free floating cells or directly enter oil-attached microbial cells from the oil particle. In this study, crude oil was placed in a swirling flask with Corpus Christi Bay water and was then chemically dispersed with Corexit 9500. The biodegradation was then monitored and assessed. First order rate coefficients were determined based on the disappearance of specific compounds. The rate coefficients for total target PAHs were consistent for all tests. Napthalene, phenanthrene, dibenzothiophene and their alkylated homologs were among the target compounds. The trend was also observed for total target analytes and for total target saturates. The results indicate that the biodegradation rate coefficient was not dependent on the bulk concentration of oil in the water column. It was concluded that biodegradation rates was controlled by partitioning of the compounds between the two phases, and other factors such as particle size distribution and the capability of the microbial culture, temperature and nutrients. 13 refs., 1 tab., 6 figs

  8. Converting heavy oils into light oils, etc

    Energy Technology Data Exchange (ETDEWEB)

    Mony, H

    1915-12-22

    A process is described for transforming heavy oils obtained by the carbonization of lignites, peats, coals, shales into light oils, and also the heavy oils of mineral and vegetable origin, consisting of heating the heavy oils or tars in the presence of one or more solid substances or liquids suitably chosen to cause the distillation of the oils under atmospheric pressure at an appropriate temperature; solid and liquid substances which favor the production of light products under the influence of heat being added preferably to the oil to be treated before putting it in the retort and before heating, so that light oils are obtained by treatment of the heavy oils in a single operation.

  9. Deposition Measurements in NSTX

    Science.gov (United States)

    Skinner, C. H.; Kugel, H. W.; Hogan, J. T.; Wampler, W. R.

    2004-11-01

    Two quartz microbalances have been used to record deposition on the National Spherical Torus Experiment. The experimental configuration mimics a typical diagnostic window or mirror. An RS232 link was used to acquire the quartz crystal frequency and the deposited thickness was recorded continuously with 0.01 nm resolution. Nuclear Reaction Analysis of the deposit was consistent with the measurement of the total deposited mass from the change in crystal frequency. We will present measurements of the variation of deposition with plasma conditions. The transport of carbon impurities in NSTX has been modelled with the BBQ code. Preliminary calculations indicated a negligible fraction of carbon generated at the divertor plates in quiescent discharges directly reaches the outer wall, and that transient events are responsible for the deposition.

  10. Shedding of ash deposits

    DEFF Research Database (Denmark)

    Zbogar, Ana; Frandsen, Flemming; Jensen, Peter Arendt

    2009-01-01

    Ash deposits formed during fuel thermal conversion and located on furnace walls and on convective pass tubes, may seriously inhibit the transfer of heat to the working fluid and hence reduce the overall process efficiency. Combustion of biomass causes formation of large quantities of troublesome...... ash deposits which contain significant concentrations of alkali, and earth-alkali metals. The specific composition of biomass deposits give different characteristics as compared to coal ash deposits, i.e. different physical significance of the deposition mechanisms, lower melting temperatures, etc....... Low melting temperatures make straw ashes especially troublesome, since their stickiness is higher at lower temperatures, compared to coal ashes. Increased stickiness will eventually lead to a higher collection efficiency of incoming ash particles, meaning that the deposit may grow even faster...

  11. Vegetable oil spills : oil properties and behaviour

    International Nuclear Information System (INIS)

    Fingas, M.; Fieldhouse, B.; Jokuty, P.

    2001-01-01

    In 1997, the United States Environmental Protection Agency conducted a thorough review of the issue regarding vegetable oil spills. Recent attention has refocused on this issue as a result of an incident where 20 tons of canola oil was spilled in the Vancouver Harbour in 2000. In the past, vegetable oils were suggested to be a useful test material because they were thought to be innocuous. It was even suggested they be used to remove petroleum oil residues from beaches. However, recent studies have shown that spills of vegetable oils can have major environmental consequences, equivalent to those of petroleum oil spills. The spills have devastating effects on birds and intertidal organisms. This paper presented a summary of historical vegetable spills from around the world. In this study, specific behaviour tests were examined for several oils including canola, soy bean, olive, castor and corn oils. Evaporation, water-in-oil emulsification and chemical dispersion were measured and were found to be nearly zero, suggesting that vegetable oil spills are not very soluble in water. The aquatic toxicity of vegetable oil is low, but their fate is quite different from petroleum. Vegetable oils do not evaporate to a significant degree, they do not form water-in-oil emulsions, nor do they disperse in water. The physical properties of vegetable oils were also measured, including density and viscosity. This paper presented the aquatic toxicity of several vegetable oils along with other environmental data including the degradation rates noted in the literature. Most environmental damage reported in the literature is by contact with birds feathers resulting in hypothermia and secondly by smothering of intertidal organisms. The effect of vegetable oil on fish has not been well studied, but it is expected that there will be little destructive effect except where smothering can occur. 35 refs., 3 tabs

  12. Vegetable oil spills : oil properties and behaviour

    Energy Technology Data Exchange (ETDEWEB)

    Fingas, M.; Fieldhouse, B.; Jokuty, P. [Environment Canada, Ottawa, ON (Canada). Emergencies Science Div

    2001-07-01

    In 1997, the United States Environmental Protection Agency conducted a thorough review of the issue regarding vegetable oil spills. Recent attention has refocused on this issue as a result of an incident where 20 tons of canola oil was spilled in the Vancouver Harbour in 2000. In the past, vegetable oils were suggested to be a useful test material because they were thought to be innocuous. It was even suggested they be used to remove petroleum oil residues from beaches. However, recent studies have shown that spills of vegetable oils can have major environmental consequences, equivalent to those of petroleum oil spills. The spills have devastating effects on birds and intertidal organisms. This paper presented a summary of historical vegetable spills from around the world. In this study, specific behaviour tests were examined for several oils including canola, soy bean, olive, castor and corn oils. Evaporation, water-in-oil emulsification and chemical dispersion were measured and were found to be nearly zero, suggesting that vegetable oil spills are not very soluble in water. The aquatic toxicity of vegetable oil is low, but their fate is quite different from petroleum. Vegetable oils do not evaporate to a significant degree, they do not form water-in-oil emulsions, nor do they disperse in water. The physical properties of vegetable oils were also measured, including density and viscosity. This paper presented the aquatic toxicity of several vegetable oils along with other environmental data including the degradation rates noted in the literature. Most environmental damage reported in the literature is by contact with birds feathers resulting in hypothermia and secondly by smothering of intertidal organisms. The effect of vegetable oil on fish has not been well studied, but it is expected that there will be little destructive effect except where smothering can occur. 35 refs., 3 tabs.

  13. Biochemically enhanced oil recovery and oil treatment

    Science.gov (United States)

    Premuzic, Eugene T.; Lin, Mow

    1994-01-01

    This invention relates to the preparation of new, modified organisms, through challenge growth processes, that are viable in the extreme temperature, pressure and pH conditions and salt concentrations of an oil reservoir and that are suitable for use in microbial enhanced oil recovery. The modified microorganisms of the present invention are used to enhance oil recovery and remove sulfur compounds and metals from the crude oil.

  14. Behaviour of oil in freezing environments : a literature review

    International Nuclear Information System (INIS)

    Fingas, M.F.; Hollebone, B.P.

    2002-01-01

    Oils spilled in icy waters undergo complex behaviour and fate processes. This paper reviewed the available information regarding the physical fate and behaviour of crude oil and petroleum products spilled in Arctic environments. Specific mathematical relationships that can be used to predict the behaviour of oil in icy environments were also reviewed and behavioural mechanisms were summarized according the most probable fate and final deposition scenarios of oil spills in water. The study evaluates spreading models for oil on ice, under ice, in snow, in brash ice and between blocks of ice. The ability of ice sheets to trap oil is also discussed with particular reference to oil storage capacity. The effect of oil on ice formation and the thermal effects of oil inclusion in ice was examined, along with the migration of oil through ice, including movement through brine channels. It was concluded that more research is needed to better predict oil behaviour and fate in ice infested waters, particularly in the area of quantification. 32 refs

  15. Uraniferous surficial deposits

    International Nuclear Information System (INIS)

    Toens, P.D.; Hambleton-Jones, B.B.

    1980-10-01

    As a result of the discovery of uranium in surficial deposits of Tertiary to Recent age, in Australia and Southern Africa, increasing attention is being paid to the location and understanding of the genesis of these deposits. The paper discusses the definitions and terminology currently in use and a classification of these deposits is presented. It is concluded that in order to obtain a measure of clarity, the terms calcrete, gypcrete and dolocrete should not be used to describe the uraniferous valley-fill deposits of Southern Africa and Australia [af

  16. Biodiesel production from castor oil in Brazil: A difficult reality

    International Nuclear Information System (INIS)

    Silva Cesar, Aldara da; Otavio Batalha, Mario

    2010-01-01

    The Brazilian National Program for Production and Use of Biodiesel (PNPB in Portuguese) has created a huge demand for biodiesel in Brazil. The PNPB is strongly based on social development through the inclusion of family farmers in projects integrated with biodiesel power plants. Among the various oilseeds, castor bean (Ricinus communis L.) was identified as the ideal one to promote social development in the semi-arid region. However, although promising, the mechanisms of the federal program are still insufficient to promote the effective participation of family farmers. This research shows that companies are facing huge problems in implementing contracts with family farmers. It describes and analyzes the functioning dynamics of this agro-production chain. This paper addresses the identification and the discussion of these obstacles, in order to increase the competitiveness of the biodiesel agribusiness chain, based on castor oil social projects in Brazil.

  17. Dispersion, deposition and resuspension of atmospheric contaminants

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    The following topics are discussed: dry deposition, oil shale fugitive air emissions, particle resuspension and translocation, theoretical studies and applications, and processing of emissions by clouds and precipitation. The concentration of contaminant species in air is governed by the rate of input from sources, the rate of dilution or dispersion as a result of air turbulence, and the rate of removal to the surface by wet and dry deposition processes. Once on the surface, contaminants also may be resuspended, depending on meteorological and surface conditions. An understanding of these processes is necessary for accurate prediction of exposures of hazardous or harmful contaminants to humans, animals, and crops. In the field, plume dispersion and plume depletion by dry deposition were studied by the use of tracers. Dry deposition was investigated for particles of both respiration and inhalation interest. Complementary dry deposition studies of particles to rock canopies were conducted under controlled conditions in a wind tunnel. Because of increasing concern about hazardous, organic gases in the atmosphere some limited investigations of the dry deposition of nitrobenzene to a lichen mat were conducted in a stirred chamber. Resuspension was also studied using tracers and contaminated surfaces and in the wind tunnel. The objective of the resuspension studies was to develop and verify models for predicting the airborne concentrations of contaminants over areas with surface contamination, develop resuspension rate predictors for downwind transport, and develop predictors for resuspension input to the food chain. These models will be of particular relevance to the evaluation of deposition and resuspension of both radionuclides and chemical contaminants

  18. Generation and migration of Bitumen and oil from the oil shale interval of the Eocene Green River formation, Uinta Basin, Utah

    Science.gov (United States)

    Johnson, Ronald C.; Birdwell, Justin E.; Mercier, Tracey J.

    2016-01-01

    The results from the recent U.S. Geological Survey assessment of in-place oil shale resources of the Eocene Green River Formation, based primarily on the Fischer assay method, are applied herein to define areas where the oil shale interval is depleted of some of its petroleum-generating potential along the deep structural trough of the basin and to make: (1) a general estimates of the amount of this depletion, and (2) estimate the total volume of petroleum generated. Oil yields (gallons of oil per ton of rock, GPT) and in-place oil (barrels of oil per acre, BPA) decrease toward the structural trough of the basin, which represents an offshore lacustrine area that is believed to have originally contained greater petroleum-generating potential than is currently indicated by measured Fischer assay oil yields. Although this interval is considered to be largely immature for oil generation based on vitrinite reflectance measurements, the oil shale interval is a likely source for the gilsonite deposits and much of the tar sands in the basin. Early expulsion of petroleum may have occurred due to the very high organic carbon content and oil-prone nature of the Type I kerogen present in Green River oil shale. In order to examine the possible sources and migration pathways for the tar sands and gilsonite deposits, we have created paleogeographic reconstructions of several oil shale zones in the basin as part of this study.

  19. The extraction of bitumen from western oil sands

    International Nuclear Information System (INIS)

    Oblad, A.G.; Bunger, J.W.; Dahlstrom, D.A.; Deo, M.D.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1992-08-01

    The University of Utah tar sand research and development program is concerned with research and development on Utah is extensive oil sands deposits. The program has been intended to develop a scientific and technological base required for eventual commercial recovery of the heavy oils from oil sands and processing these oils to produce synthetic crude oil and other products such as asphalt. The overall program is based on mining the oil sand, processing the mined sand to recover the heavy oils and upgrading them to products. Multiple deposits are being investigated since it is believed that a large scale (approximately 20,000 bbl/day) plant would require the use of resources from more than one deposit. The tasks or projects in the program are organized according to the following classification: Recovery technologies which includes thermal recovery methods, water extraction methods, and solvent extraction methods; upgrading and processing technologies which covers hydrotreating, hydrocracking, and hydropyrolysis; solvent extraction; production of specialty products; and environmental aspects of the production and processing technologies. These tasks are covered in this report

  20. 77 FR 41442 - Notice of Availability of the Draft Order of the Secretary on Oil and Gas and Potash Development...

    Science.gov (United States)

    2012-07-13

    ... area near the town of Carlsbad in southeastern New Mexico has large deposits of potash, oil, and gas... from oil and gas drilling until such time as data is available to properly classify the potash... Availability of the Draft Order of the Secretary on Oil and Gas and Potash Development Within the Designated...

  1. Coconut oil enhances tomato carotenoid tissue accumulation compared to safflower oil in the Mongolian gerbil ( Meriones unguiculatus ).

    Science.gov (United States)

    Conlon, Lauren E; King, Ryan D; Moran, Nancy E; Erdman, John W

    2012-08-29

    Evidence suggests that monounsaturated and polyunsaturated fats facilitate greater absorption of carotenoids than saturated fats. However, the comparison of consuming a polyunsaturated fat source versus a saturated fat source on tomato carotenoid bioaccumulation has not been examined. The goal of this study was to determine the influence of coconut oil and safflower oil on tomato carotenoid tissue accumulation in Mongolian gerbils ( Meriones unguiculatus ) fed a 20% fat diet. Coconut oil feeding increased carotenoid concentrations among many compartments including total carotenoids in the serum (p = 0.0003), adrenal glandular phytoene (p = 0.04), hepatic phytofluene (p = 0.0001), testicular all-trans-lycopene (p = 0.01), and cis-lycopene (p = 0.006) in the prostate-seminal vesicle complex compared to safflower oil. Safflower oil-fed gerbils had greater splenic lycopene concentrations (p = 0.006) compared to coconut oil-fed gerbils. Coconut oil feeding increased serum cholesterol (p = 0.0001) and decreased hepatic cholesterol (p = 0.0003) compared to safflower oil. In summary, coconut oil enhanced tissue uptake of tomato carotenoids to a greater degree than safflower oil. These results may have been due to the large proportion of medium-chain fatty acids in coconut oil, which might have caused a shift in cholesterol flux to favor extrahepatic carotenoid tissue deposition.

  2. Maceral and geochemical characteristics of oil shale 2 from the Huangxian Basin, China

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Yuzhuang; Lin, Mingyue; Li, Haimei; Zhang, Hongjian; Li, Shifeng; Jin, Kankun [Hebei Architectural Science and Technology Inst., Handan, Hebei (China)

    2001-07-01

    Five samples of Oil Shale 2 from the Huangxian Basin have been analysed by coal petrographic and geochemical methods in order to study its formation environment. Higher alginite ratios and hopanes in Oil Shale 2 indicate a lower plants and anoxic environment. Two ternary diagrams of 'facies diagnostic' macerals and biomarkers were used to interpret the depositional environments of organic matter in Oil Shale 2. In both diagrams, Oil Shale 2 plots in a lower plant zone, and was deposited in a deeper water environment. (Author)

  3. Recent developments in the deposition of colloidal asphaltene in capillary flow : experiments and mesoscopic simulation

    NARCIS (Netherlands)

    Wilson, A.D.; Boek, E.S.; Ladva, H.K.; Crawshaw, J.; Padding, J.T.

    2009-01-01

    The aggregation and deposition of asphaltenic material in reservoir rock are significant problems in the oil industry and can adversely affect the producibility of a given reservoir. To obtain a fundamental understanding of this phenomenon, we have studied the deposition and aggregation of colloidal

  4. Compound depositions from the BOPEC fires on Bonaire : Measurements and risk assessment

    NARCIS (Netherlands)

    van de Meent D; Bodar CWM; Boshuis ME; de Groot AC; de Zwart D; Hoffer SM; Janssen PJCM; Mooij M; de Groot GM; Peijnenburg WJGM; Verbruggen EMJ; IMG; SEC; LER; mev

    2011-01-01

    Some polycyclic aromatic hydrocarbons (PAHs) and some perfluorinated fire fighting foam constituents (especially perfluorooctane sulfonate, PFOS) were found in deposited soot and in water on Bonaire due to the BOPEC oil depot fires in September 2010. The soot deposition did not result in elevated

  5. The Other Major 2010 Oil Spill: Oil weathering after the Kalamazoo River Dilbit Spill

    Science.gov (United States)

    Swarthout, B.; Reddy, C. M.; Nelson, R. K.; Hamilton, S. K.; Aeppli, C.; Valentine, D. L.; Fundaun, S. E.; Oliveira, A. H.

    2016-02-01

    Diluted bitumen (dilbit) from the oil sands (tar sands) of western Canada is increasingly being transported to US markets. North America's largest inland oil spill and the first major oil sands spill in a freshwater environment occurred in 2010, when at least 843,000 gallons leaked from a pipeline into the Kalamazoo River of southwest Michigan. Cleanup of this oil was unusually difficult and protracted, lasting through 2014 and costing over a billion dollars, largely because a substantial fraction of the oil became submersed and deposited in slack water areas over 60 km of river channel, reservoirs, and floodplain backwaters. To investigate the fate of the spilled dilbit from the 2010 Kalamazoo River release, black rings, presumably oil residues, on the bark of dead trees were collected in 2015. These residues were deposited on the trees during high flood levels that have not been observed since the spill and represent an opportunity to constrain weathering processes excluding dissolution. This material contained a major non-GC amenable fraction of 90-95%, presumably oxygenated hydrocarbons. The GC amenable portion was consistent with laboratory weathered dilbit. We used a variety of analytical tools to characterize the dilbit residues, as well as to identify dilbit weathering processes that occurred since the spill.

  6. Oil sands to the rescue: oil sand microbial communities can degrade recalcitrant alkyl phenyl alkanoic acids

    Energy Technology Data Exchange (ETDEWEB)

    Whitby, Corinne [University of Essex (Canada)], email: cwhitby@essex.ac.uk

    2011-07-01

    Almost half of all global oil reserves are found as biodegraded heavy oils found in vast tar sand deposits located in North and South America and these account for 47% of Canadian oil production. Oil sand extraction generates large amounts of toxic waste water, known as oil sand process waters (OSPW), that are stored in large tailing ponds that contain toxic compounds like naphthenic acids (NAs). The presence of NAs creates problems like toxicity, corrosion, and the formation of calcium napthenate deposits which block pipelines and other infrastructure and need to be removed. This paper presents oil sand microbial communities that can degrade these NAs. The approach is to apply new aliphatic and aromatic NAs as substrates to supplement and identify NA degrading microbes and also to identify the metabolites produced and explain NA degradation pathways and the functional genes involved. The chemistry and the processes involved are explained. From the results, it is suggested that pure cultures of P. putida KT2440 be used against NAs.

  7. Deep-water turbidity systems: a review of their elements, sedimentary processes and depositional models. Their characteristics on the Iberian margins; Sistemas turbiditicos de aguas profundas: revision de sus elementos, procesos sedimentarios y modelos deposicionales. Sus caracteristicas en los margenes Ibericos

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, M.; Ercilla, G.; Alonso, B.; Estrada, F.; Jane, G.; Mena, A.; Alves, T.; Juan, C.

    2015-07-01

    Turbidity systems or submarine fans are considered the most important clastic accumulations in the deep sea and represent the sediment-transfer system between the hinterland source area and the deep-sea depositional sink. Their deposits contain information about global factors and local factors. Different scales and varying observational methods have contributed to the lack of a unifying terminology. In order to solve this problem several authors have proposed an elemental approach. The main architectural elements defining a turbidity sys- tem are: large-scale erosive features (mass-movements and canyons), channels and channel-fill deposits, over- bank deposits and lobes. The sediment making up these elements is principally from gravity flow deposits, the most widely recognised being the turbidity, and other submarine mass movements. The genesis and character of these elements, as well as the overall geometry of the systems, indicate they are formed by a complex inter- action between global and local factors. Various turbidity-system classifications are found in the literature, the most widely-used being based on grain size and feeder systems. Besides the scientific importance of turbiditic systems, they are predominantly studied because of the economic interest in them, as turbidite sandstones con- stitute important gas and oil reservoirs. Turbidite systems shape the sea floor of the Iberian continental margins and contribute in a large part to their outbuilding and basin in filling. They are hugely variable in size, location within the physiographic domains, style and overall geometry of the architectural elements, as well as sediment composition. The most studied Iberian turbidity fans are in the Mediterranean Sea whereas those of the Atlantic Ocean remain poorly known. (Author)

  8. Is Estonian oil shale beneficial in the future?

    International Nuclear Information System (INIS)

    Reinsalu, Enno

    1998-01-01

    subsidization of oil processing is normal for the state as for an owner of all oil shale industry. Electricity is relatively cheap and the mining company has a possibility for producing concentrated oil shale for processing as a by-product. Particularly the mining company is interested in cash flow and agrees with cheaper trade oil shale concentrates than cost price. The motivation of subsidization on the State level is that the power company can not produce more electricity than it can trade at present, but the oil plant is able to trade all produced shale oil, including export. It is obvious that in the case of privatisation, the subsidisation of oil processing will cease. The power industry is utilising the largest part of the oil shale energy, but is delivering only 11-12% of the oil shale bed energy to the filial consumer. The reason is great losses in generation and distribution of electricity. The oil processing industry is also only delivering a low 10 per cent of the oil shale deposit energy, but oil is not as high quality of an energy form as electricity. A revision has been made of oil shale reserves according to market economy conditions. The bases for the prognosis is the electricity demand projection and the presumption that energy utilisation per gross domestic product must decrease significantly. One takes the energy rating of 35 G J per m 2 (about 10 MWh per m 2 ) as a critical value for a mine able bed. Mining fields have the energy rating from 36.5 to 46.3 G J per m 2 , with an average of 42.2 G J per m 2

  9. The Application of Biogeophysical Studies in the Search for Oil Fields

    Directory of Open Access Journals (Sweden)

    M.Sh. Mardanov

    2017-08-01

    Full Text Available The article gives an analysis of qualitative and quantitative indices of biogeophysical anomalies (BGPh-anomalies recorded over oil deposits, obtained as a result of experimental and methodological work on the oil fields studied in detail. By the degree of intensity and complexity of the BGPh-anomalies registered in digital form with special equipment developed by the authors, a set of qualitative and quantitative features has been developed that make it possible to determine the genetic type of the structural trap of the identified oil deposit, and, under favorable conditions, the depth of its occurrence. BGPh-anomalies of the “tectonic fault” type, their influence on the “oil deposit” type of BGPh-anomalies have been studied. The limiting values ​​of the watercut in the exploited oil reservoir are determined, when exceeding, the oil reservoir ceases to create a BGPh-anomaly such as “oil deposit”, which can be used for the areal monitoring of oil fields. The minimum thickness of the oil-saturated reservoir is determined, which creates an anomaly of the “oil deposit” type. Based on this analysis, it is assumed that the BGPh-anomalies arise only over oil deposits, potential for industrial development.

  10. A Huge Morel-Lavallée Lesion Treated Using a Quilting Suture Method: A Case Report and Review of the Literature.

    Science.gov (United States)

    Seo, Bommie F; Kang, In Sook; Jeong, Yeon Jin; Moon, Suk Ho

    2014-06-01

    The Morel-Lavallée lesion is a collection of serous fluid that develops after closed degloving injuries and after surgical procedures particularly in the pelvis and abdomen. It is a persistent seroma and is usually resistant to conservative methods of treatment such as percutaneous drainage and compression. Various methods of curative treatment have been reported in the literature, such as application of fibrin sealant, doxycycline, or alcohol sclerodhesis. We present a case of a huge recurrent Morel-Lavallée lesion in the lower back and buttock region that was treated with quilting sutures, fibrin sealant, and compression, with a review of the literature. © The Author(s) 2014.

  11. Saudi Aramco: Oil to a Thirsty Market - International Cooperation Brings New Oil Field on Quickly

    Energy Technology Data Exchange (ETDEWEB)

    Al-Ajmi, Ali

    2007-07-01

    In response to high oil demand in 2004, Saudi Aramco committed to build facilities for the 500,000 BOPD Khursaniyah Oil Field in only 34 months from the start of preliminary engineering to startup. The project schedule was six months faster than any previous project, in the most resource competitive market the oil business has ever seen. The execution of this project required a new contract strategy, novel engineering and construction methods, and international cooperation from EPC firms and manufacturers. The project is also building a new one billion SCF per day gas plant receiving gas from five different sources with varying pressure and H2S content, along with huge water supply and injection facilities, oil gathering lines, and product distribution lines. To execute the project in this short time frame, a temporary construction city for 30,000 men has been constructed in the desert. This city has workers from all over 30 countries, speaking more than 15 languages, all focused on achieving one goal - on time completion of the most complex project ever done in Saudi Arabia. The paper will focus on the unique challenges of managing a city of this size that lasts for only 24 months. (auth)

  12. Effect of randomization of mixtures of butter oil and vegetable oil on absorption and lipid metabolism in rats

    DEFF Research Database (Denmark)

    Becker, C.; Lund, Pia; Hølmer, Gunhild Kofoed

    2001-01-01

    of the dietary fats compared. Data on the fate of such lipids beyond the bloodstream is rather scarce and animal model studies are needed. Aim of the study To compare the metabolism of butter oil and mixtures of butter and rapeseed oil, native or randomized, in a model. The regiospecific fatty acid distribution...... present in dietary fats was followed through absorption, chylomicron formation, and deposition in adipose tissue and in different liver lipids (triacylglycerols, phospholipids, and cholesterol esters). Methods Rats were fed for 6 weeks from weaning either butter oil (BO), a butteroil- rapeseed oil mixture...... (interesterification) of butter oil with rapeseed oil (65:35 w/w) for use as edible fat did not have any impact on the fatty acid composition beyond the chylomicron step when compared to the native mixture....

  13. Non-Petroleum Oils

    Science.gov (United States)

    These include synthetics such as silicone fluids and tung oils, wood-derivative oils such as resin/rosin, animal fats/oil, and seed oils. Many have similar physical properties to petroleum-based, such as water insolubility and formation of slicks.

  14. Determination of depositional beryllium-10 fluxes in the area of the Laptev sea

    Energy Technology Data Exchange (ETDEWEB)

    Strobl, C.; Schulz, V.; Schaeper, S.; Molnar, M.; Baumann, S.; Mangini [Heidelberger Akademie der Wissenschaften, Heidelberg (Germany); Kubik, P.W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    A huge amount of continental {sup 10}Be is delivered to the Arctic Ocean through the rivers. Our investigations show that the most extensive part of it is deposited directly in the shelf areas. The determined sedimentation flux densities in the continental slope and in the Central Arctic Ocean are in the range of the assumed atmospheric input of {sup 10}Be and therefore clearly lower than in the shelf areas. (author) 1 fig., 2 refs.

  15. MAPLE deposition of nanomaterials

    International Nuclear Information System (INIS)

    Caricato, A.P.; Arima, V.; Catalano, M.; Cesaria, M.; Cozzoli, P.D.; Martino, M.; Taurino, A.; Rella, R.; Scarfiello, R.; Tunno, T.; Zacheo, A.

    2014-01-01

    The matrix-assisted pulsed laser evaporation (MAPLE) has been recently exploited for depositing films of nanomaterials by combining the advantages of colloidal inorganic nanoparticles and laser-based techniques. MAPLE-deposition of nanomaterials meeting applicative purposes demands their peculiar properties to be taken into account while planning depositions to guarantee a congruent transfer (in terms of crystal structure and geometric features) and explain the deposition outcome. In particular, since nanofluids can enhance thermal conductivity with respect to conventional fluids, laser-induced heating can induce different ablation thermal regimes as compared to the MAPLE-treatment of soft materials. Moreover, nanoparticles exhibit lower melting temperatures and can experience pre-melting phenomena as compared to their bulk counterparts, which could easily induce shape and or crystal phase modification of the material to be deposited even at very low fluences. In this complex scenario, this review paper focuses on examples of MAPLE-depositions of size and shape controlled nanoparticles for different applications highlights advantages and challenges of the MAPLE-technique. The influence of the deposition parameters on the physical mechanisms which govern the deposition process is discussed.

  16. MAPLE deposition of nanomaterials

    Energy Technology Data Exchange (ETDEWEB)

    Caricato, A.P., E-mail: annapaola.caricato@le.infn.it [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); Arima, V.; Catalano, M. [National Nanotechnology Laboratory (NNL), CNR Istituto Nanoscienze, c/o Distretto Tecnologico, Via Arnesano n. 16, I-73100 Lecce (Italy); Cesaria, M. [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); Cozzoli, P.D. [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); National Nanotechnology Laboratory (NNL), CNR Istituto Nanoscienze, c/o Distretto Tecnologico, Via Arnesano n. 16, I-73100 Lecce (Italy); Martino, M. [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); Taurino, A.; Rella, R. [Institute for Microelectronics and Microsystems, IMM-CNR, Via Monteroni, I-73100 Lecce (Italy); Scarfiello, R. [National Nanotechnology Laboratory (NNL), CNR Istituto Nanoscienze, c/o Distretto Tecnologico, Via Arnesano n. 16, I-73100 Lecce (Italy); Tunno, T. [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); Zacheo, A. [Department of Mathematics and Physics “E. De Giorgi”, University of Salento, Via Arnesano, I-73100 Lecce (Italy); National Nanotechnology Laboratory (NNL), CNR Istituto Nanoscienze, c/o Distretto Tecnologico, Via Arnesano n. 16, I-73100 Lecce (Italy)

    2014-05-01

    The matrix-assisted pulsed laser evaporation (MAPLE) has been recently exploited for depositing films of nanomaterials by combining the advantages of colloidal inorganic nanoparticles and laser-based techniques. MAPLE-deposition of nanomaterials meeting applicative purposes demands their peculiar properties to be taken into account while planning depositions to guarantee a congruent transfer (in terms of crystal structure and geometric features) and explain the deposition outcome. In particular, since nanofluids can enhance thermal conductivity with respect to conventional fluids, laser-induced heating can induce different ablation thermal regimes as compared to the MAPLE-treatment of soft materials. Moreover, nanoparticles exhibit lower melting temperatures and can experience pre-melting phenomena as compared to their bulk counterparts, which could easily induce shape and or crystal phase modification of the material to be deposited even at very low fluences. In this complex scenario, this review paper focuses on examples of MAPLE-depositions of size and shape controlled nanoparticles for different applications highlights advantages and challenges of the MAPLE-technique. The influence of the deposition parameters on the physical mechanisms which govern the deposition process is discussed.

  17. Application of oil spill model to marine pollution and risk control problems

    Science.gov (United States)

    Aseev, Nikita; Agoshkov, Valery; Sheloput, Tatyana

    2017-04-01

    Oil transportation by sea induces challenging problems of environmental control. Millions of tonnes of oil are yearly released during routine ship operations, not to mention vast spills due to different accidents (e.g. tanker collisions, grounding, etc.). Oil pollution is dangerous to marine organisms such as plants, fish and mammals, leading to widespread damage to our planet. In turn, fishery and travel agencies can lose money and clients, and ship operators are obliged to pay huge penalties for environmental pollution. In this work we present the method of accessing oil pollution of marine environment using recently developed oil spill model. The model describes basic processes of the oil slick evolution: oil transport due to currents, drift under the action of wind, spreading on the surface, evaporation, emulsification and dispersion. Such parameters as slick location, mass, density of oil, water content, viscosity and density of "water-in-oil" emulsion can be calculated. We demonstrate how to apply the model to damage calculation problems using a concept of average damage to particular marine area. We also formulate the problem of oil spill risk control, when some accident parameters are not known, but their probability distribution is given. We propose a new algorithm to solve such problems and show results of our model simulations. The work can be interesting to broad environmental, physics and mathematics community. The work is supported by Russian Foundation for Basic Research grant 16-31-00510.

  18. Oil and influence: the oil weapon examined

    Energy Technology Data Exchange (ETDEWEB)

    Maull, H

    1975-01-01

    The term ''oil weapon'' as used here signifies any manipulation of the price and/or supply of oil by exporting nations with the intention of changing the political behavior of the consumer nations. The political potential of the oil price is fairly restricted so, in effect, the supply interruptions are of prime concern. Manipulating price does, in principle, offer the possibilities of both conferring rewards and inflicting sanctions. Oil could be sold on preferential prices and terms. A precondition for using the oil weapon successfully would be the ability to cause real and serious damage to the consumer countries. Four damaging potentials for using the oil weapon could include its application by: (1) one producer against one consumer; (2) one producer against all consumers; (3) a group of producers against one consumer; and (4) by a group of producers against all consumers. It is concluded that the oil weapon will continue to be a force in the international system. (MCW)

  19. Kazakhstan big oil transportation options

    International Nuclear Information System (INIS)

    Sakipov, K.E.; Mazhkenov, S.A.; Kunaev, M.S.

    1999-01-01

    One the most important priority identified with the framework of the long-term Republican development aim implementation defined in the Programme of Long-Term Development of Republic of Kazakhstan by 2030 is exploration of huge hydrocarbon reserves. Strategic direction of Kazakhstan petroleum industry development is a comprehensive approach towards the improvement all elements of the complex processing chain, from exploration to production and from transportation to oil and processed product marketing. Republican Association of Young Engineers and Specialists, Engineering Academy of the Republic of Kazakhstan (RAMIS EA RK) considers the most perspective and realistic route. The pipeline will pass from Western region of Kazakhstan to Kumkol further via the existing Omsk-Chardzhou pipeline, Turkmenistan, Western Afghanistan, Pakistan to sea terminal; on the Pakistan coast of the Arabian Sea. Omsk-Chardzhou pipeline was built 12 years ago and is currently no operating. Its length is 2.000 km with 1.800 km crossing Kazakhstan's territory. Even now this pipeline is enable of transporting up to 20 million tonnes of oil per year with the optional increase up to 30 million. Construction of similar pipeline could have cost $2 billion. Connecting Atyrau-Kumkol and Omsk-Chardzhou pipelines could enable Russia and Kazakhstan to penetrate, via Central Asia, Indian and South Asian countries to the Arabian Sea. According to the World Bank Data this region will be rapidly developing within next 15-20 years. During 1995-2010 the estimated demand for the hydrocarbon should double, from 18.0 to 31.69 million tonnes per annual. This means an annual average growth rate of 3.8 %, the highest demand growth rate in the world on petroleum. Transportation of one barrel of West-Siberian oil via Omsk-Pavlodar-Shymkent-Chardzhou route towards the Indian Ocean will bring additional two dollars revenue as compared with the existing route transportation. For the pre-Caspian oil revenue will reach

  20. The conjunction of factors that lead to formation of giant gold provinces and deposits in non-arc settings

    Directory of Open Access Journals (Sweden)

    David I. Groves

    2016-05-01

    In contrast to their province scale similarities, the different giant gold deposit styles show contrasting critical controls at the district to deposit scale. For orogenic gold deposits, the giants appear to have formed by conjunction of a greater number of parameters to those that control smaller deposits, with resultant geometrical and lithostratigraphic complexity as a guide to their location. There are few giant IRGS due to their inferior fluid-flux systems relative to orogenic gold deposits, and those few giants are essentially preservational exceptions. Many Carlin-type deposits are giants due to the exceptional conjunction of both structural and lithological parameters that caused reactive and permeable rocks, enriched in syngenetic gold, to be located below an impermeable cap along antiformal “trends”. Hydrocarbons probably played an important role in concentrating metal. The supergiant Post-Betze deposit has additional ore zones in strain heterogeneities surrounding the pre-gold Goldstrike stock. All unequivocal IOCG deposits are giant or near-giant deposits in terms of gold-equivalent resources, partly due to economic factors for this relatively poorly understood, low Cu-Au grade deposit type. The supergiant Olympic Dam deposit, the most shallowly formed deposit among the larger IOCGs, probably owes its origin to eruption of volatile-rich hybrid magma at surface, with formation of a large maar and intense and widespread brecciation, alteration and Cu-Au-U deposition in a huge rock volume.

  1. Oil: a shock without any visible trauma

    International Nuclear Information System (INIS)

    Rifflart, Christine

    2005-10-01

    Since the beginning of the 2000's, crude oil price has increased by more than 250 %. Contrary to the 1973 and 1979 shocks, the world economic growth does not look to have been so much affected by the present shock - it is above 4 % a year for three years - and the inflation is still moderated, even in the US despite of a higher economic perform than in Euro Area. Nevertheless, the oil prices have strongly risen. So, to compensate the relative decrease of their real income, households are attempted to get further into debt. The enterprises urge to push labour costs down to neutralize the increase of the inputs prices and be competitive. In the meantime, oil exporting countries receive a huge amount of liquidities that they use to import and reinvest in the international and regional financial markets, contributing to the low long term interest rates. Initially published in: 'Revue de l'OFCE', No.95, P. 159-173

  2. The Utilization Of Resources And Regulation Along With Companys Strategies In Managing Oil And Natural Gas Industry In Indonesia

    Directory of Open Access Journals (Sweden)

    Sigit Rahardjo

    2015-08-01

    Full Text Available Oil and gas production in Indonesia has been declined since 1995 up to now the effort to increase the production has been done but it does not result yet. In contrast day by day the investment is getting increased and huge on the other hands it becomes a problem and a challenge for Indonesia to meet oil needs as raw material for refined fuel oil either for transportation or industries. Day by day the needs of refined fuel oil is getting increased and huge as it is correlated to the increasing of the number of motorcycles either two-wheeled or four-wheeled as well as the increasing of oil and gas or non-oil and gas industries. Oil and natural industry Resource Base has specific characteristics those are internal factor that uses resource such as high technology huge investment cost as well as competent human resources. Besides the external factor those are good regulations either in the central and regional levels as well as the sector which is very important toward the production performance and the of company managements strategies to manage this industry. This paper attempts to figure out the impact of internal factor in the form of resources and external factor in the form of regulation as well as the effect of production performance toward petroleum companies of upstream sectors in Indonesia and managements role especially petroleum industrialists in managing the company. The wane of oil production and the increasing of refined fuel oil need in Indonesia as well as the increasing of oil production cost then it will affect the industrialists strategies in managing the companies. The resources consist of human resource oil reserve as well as petroleum technologies. While regulation consists of law central and regional government regulations and rules in oil and gas sector. Whereas the companys strategies are explained by production volume and selling volume of oil. Companys performance which sets to work in upstream sector is influenced by

  3. Transit and Globalization of the National Oil and Gas Business

    International Nuclear Information System (INIS)

    Sekulic, G.; Tomljenovic, D.

    2001-01-01

    Energy transit plays a significant role in the energy development and globalization of the energy economy due to the dependence of the countries of large energy consumers on the energy import and the increase of export from the regions which do not have a direct connection with these consumers. In such circumstances huge amounts of energy cross several borders on their way from energy producers to energy consumers ''facing'' the risks of different political systems as well as different economic, legislative and social conditions together with environment protection conditions. With the purpose of reducing such and other risks and increasing the security level of consumer supply as well as the economic results in the energy sector, huge efforts are being made in creating market, non-discriminatory and transparent transit conditions through international treaties, agreements, conventions, protocols and similar. Owing to its geographical position, especially on the Mediterranean, the Republic of Croatia is an interesting transit country, but until now it profited only partially from this advantage. By constructing new gas pipelines and new connections of the existing oil pipeline with the European network both for the needs of local supply and transit, and according to the adopted international obligations on the conditions of the access to available capacities, construction of new capacities, market pricing, environment protection and other, oil and gas transit through this Croatia of Ours will be increased and further integration of oil and gas economy into the globalization processes will be speeded up.(author)

  4. Enhanced Oil Recovery (EOR by Miscible CO2 and Water Flooding of Asphaltenic and Non-Asphaltenic Oils

    Directory of Open Access Journals (Sweden)

    Edwin A. Chukwudeme

    2009-09-01

    Full Text Available An EOR study has been performed applying miscible CO2 flooding and compared with that for water flooding. Three different oils are used, reference oil (n-decane, model oil (n-C10, SA, toluene and 0.35 wt % asphaltene and crude oil (10 wt % asphaltene obtained from the Middle East. Stearic acid (SA is added representing a natural surfactant in oil. For the non-asphaltenic oil, miscible CO2 flooding is shown to be more favourable than that by water. However, it is interesting to see that for first years after the start of the injection (< 3 years it is shown that there is almost no difference between the recovered oils by water and CO2, after which (> 3 years oil recovery by gas injection showed a significant increase. This may be due to the enhanced performance at the increased reservoir pressure during the first period. Maximum oil recovery is shown by miscible CO2 flooding of asphaltenic oil at combined temperatures and pressures of 50 °C/90 bar and 70 °C/120 bar (no significant difference between the two cases, about 1% compared to 80 °C/140 bar. This may support the positive influence of the high combined temperatures and pressures for the miscible CO2 flooding; however beyond a certain limit the oil recovery declined due to increased asphaltene deposition. Another interesting finding in this work is that for single phase oil, an almost linear relationship is observed between the pressure drop and the asphaltene deposition regardless of the flowing fluid pressure.

  5. Enhanced oil recovery (EOR) by miscible CO{sub 2} and water flooding of asphaltenic and non-asphaltenic oils

    Energy Technology Data Exchange (ETDEWEB)

    Chukwudeme, E. A.; Hamouda, A. A. [Department of Petroleum Engineering, University of Stavanger, 4036 Stavanger (Norway)

    2009-07-01

    An EOR study has been performed applying miscible CO{sub 2} flooding and compared with that for water flooding. Three different oils are used, reference oil (n-decane), model oil (n-C10, SA, toluene and 0.35 wt % asphaltene) and crude oil (10 wt % asphaltene) obtained from the Middle East. Stearic acid (SA) is added representing a natural surfactant in oil. For the non-asphaltenic oil, miscible CO{sub 2} flooding is shown to be more favourable than that by water. However, it is interesting to see that for first years after the start of the injection (< 3 years) it is shown that there is almost no difference between the recovered oils by water and CO{sub 2}, after which (> 3 years) oil recovery by gas injection showed a significant increase. This may be due to the enhanced performance at the increased reservoir pressure during the first period. Maximum oil recovery is shown by miscible CO{sub 2} flooding of asphaltenic oil at combined temperatures and pressures of 50 {sup o}C/90 bar and 70 {sup o}C/120 bar (no significant difference between the two cases, about 1%) compared to 80 {sup o}C/140 bar. This may support the positive influence of the high combined temperatures and pressures for the miscible CO{sub 2} flooding; however beyond a certain limit the oil recovery declined due to increased asphaltene deposition. Another interesting finding in this work is that for single phase oil, an almost linear relationship is observed between the pressure drop and the asphaltene deposition regardless of the flowing fluid pressure. (author)

  6. Oil companies make cutbacks

    International Nuclear Information System (INIS)

    Dupin, Ludovic

    2014-01-01

    As oil prices are falling, the oil sector faces company restructuring, merger projects, closure of oil fields, and so on. Restructuring is motivated by the costs of offshore exploration and oil production projects. Saudi Arabia tries to fight the emergence of shale gases by reducing oil prices, and somehow succeeds as some projects in the USA are put into question again. Experts perceive this situation as an opportunity for the sector to improve its efficiency and reduce over-staffing

  7. Cracking hydrocarbon oils

    Energy Technology Data Exchange (ETDEWEB)

    Seigle, A A.F.M.

    1922-12-20

    Hydrocarbon oils such as petroleum, peat, shale, or lignite oils, heavy tars, resin oils, naphthalene oils, etc., are vaporized by being fed from a tank through a preheater to the lower part of a vertical annular retort heated by a flame projected down the central cavity from a burner. The oil vapors rise through annular passages formed by disks, on which are placed chips of copper, iron, aluminum, etc., to act as catalysts.

  8. Test methods for determining asphaltene stability in crude oils

    Energy Technology Data Exchange (ETDEWEB)

    Asomaning, S. [Baker Petrolite, Sugar Land, TX (United States)

    2001-07-01

    The development of test methods for the determination of the stability of asphaltenes in crude oils was rendered necessary, due to the high cost of remediating asphaltene deposition in harsh production environments, namely the underwater systems in offshore deepwater. The Oliensis Spot Test, two saturates, aromatics, resins and asphaltenes (SARA)-based screens (the Colloidal Instability Index and Asphaltene-Resin ratio), a solvent titration method with near infrared radiation (NIR) solids detection, and live oil depressurization were used for the purposes of this study, to predict the stability of asphaltenes in crude oils with different API gravity. A complete description of the test methods was provided, and the experimental data obtained as a result was presented. Correlation with data on the deposition histories of the oils was used to validate the experimental stability data. The author discussed the effectiveness of the different tests for the prediction of the stability of asphaltenes in crude oils. The prediction of a crude oil's propensity towards asphaltene precipitation was more accurate with the Colloidal Instability Index and the solvent titration method. Live oil depressurization proved to be very effective for the prediction of the stability of asphaltenes for light oils, where most stability tests fail. tabs., 31 figs.

  9. Development of taxation system for oil production companies in Russia

    Science.gov (United States)

    Salmina, S. V.; Sboeva, I. M.; Selivanovskaya, J. I.; Khafizova, A. R.; Fomin, V. P.

    2018-01-01

    The present article is devoted to the taxation system for oil production companies in Russia. The role of oil production companies in the realization of the fiscal function of the state is shown. Tax and due receipts at the consolidated budget of the Russian Federation from major economic sectors in the years 2013-2015 are presented and analysed. An investigation of oil production taxation peculiarities is carried out. In particular, mineral extraction tax analysis is made, the said tax being one of the basic taxes paid by oil production companies. The authors come to a conclusion that mineral extraction tax in Russia needs reforming. Based on the investigation realized possible ways of taxation system development in respect of oil production companies in Russia are proposed. Thus, taking into account the fact that oil industry is very important for budget revenue formation, initially it is planned to test the new taxation system principles in a limited number of deposits, so called ‘pilot projects’. For highly profitable minefield deposits it is planned to introduce progressive and regressive index, varying depending on oil prices. Within the framework of the investigation the authors come to a conclusion that it is necessary to introduce gradually the taxation system based on the definition of surplus profit depending on the cost effectiveness and taking into account oil prices.

  10. Multiple huge epiphrenic esophageal diverticula with motility disease treated with video-assisted thoracoscopic and hand-assisted laparoscopic esophagectomy: a case report.

    Science.gov (United States)

    Taniguchi, Yoshiki; Takahashi, Tsuyoshi; Nakajima, Kiyokazu; Higashi, Shigeyoshi; Tanaka, Koji; Miyazaki, Yasuhiro; Makino, Tomoki; Kurokawa, Yukinori; Yamasaki, Makoto; Takiguchi, Shuji; Mori, Masaki; Doki, Yuichiro

    2017-12-01

    Epiphrenic esophageal diverticulum is a rare condition that is often associated with a concomitant esophageal motor disorder. Some patients have the chief complaints of swallowing difficulty and gastroesophageal reflux; traditionally, such diverticula have been resected via right thoracotomy. Here, we describe a case with huge multiple epiphrenic diverticula with motility disorder, which were successfully resected using a video-assisted thoracic and laparoscopic procedure. A 63-year-old man was admitted due to dysphagia, heartburn, and vomiting. An esophagogram demonstrated an S-shaped lower esophagus with multiple epiphrenic diverticula (75 × 55 mm and 30 × 30 mm) and obstruction by the lower esophageal sphincter (LES). Esophageal manometry showed normal peristaltic contractions in the esophageal body, whereas the LES pressure was high (98.6 mmHg). The pressure vector volume of LES was 23,972 mmHg 2  cm. Based on these findings, we diagnosed huge multiple epiphrenic diverticula with a hypertensive lower esophageal sphincter and judged that resection might be required. We performed lower esophagectomy with gastric conduit reconstruction using a video-assisted thoracic and hand-assisted laparoscopic procedure. The postoperative course was uneventful, and the esophagogram demonstrated good passage, with no leakage, stenosis, or diverticula. The most common causes of mid-esophageal and epiphrenic diverticula are motility disorders of the esophageal body; appropriate treatment should be considered based on the morphological and motility findings.

  11. A case of huge colon carcinoma and right renal angiomyolipoma accompanied by proximal deep venous thrombosis, pulmonary embolism and tumor thrombus in the renal vein.

    Science.gov (United States)

    Ban, Daisuke; Yamamoto, Seiichiro; Kuno, Hirofumi; Fujimoto, Hiroyuki; Fujita, Shin; Akasu, Takayuki; Moriya, Yoshihiro

    2008-10-01

    A preoperative inferior vena cava (IVC) filter is reported to be effective in surgical cases with proximal deep venous thrombosis (DVT) or in which pulmonary embolism (PE) has already developed, and considered to be at high risk of developing secondary fatal PE during or after surgery. However, guidelines for using an IVC filter have yet to be established. The patient in the present report had two huge tumors, ascending colon cancer and renal angiomyolipoma, which occupied the entire right half of the abdomen, coexisting PE, DVT and tumor thrombus in the right renal vein. Secondary PE is fatal in the perioperative period, therefore, the vena cava filters were preoperatively inserted into the supra- and the infrarenal IVC. We successfully removed the tumors without complications. The patient is alive without tumor recurrence and PE or recurrent DVT 1 year and 6 months after surgery. The coexistence of two huge abdominal tumors as potential causes of PE and DVT is extremely rare, and we could have safely undergone the operation, using two vena cava filters in the supra- and infrarenal IVC.

  12. [Transcatheter embolization for huge pulmonary arteriovenous fistula using metallic "spider" and spring embolus--application of hand-made metallic "spider" using partial monorail technique].

    Science.gov (United States)

    Hirota, S; Sako, M; Fujita, Y; Hasegawa, Y; Sugimoto, K; Suzuki, Y; Kono, M

    1992-07-25

    We performed transcatheter embolization in two cases with huge pulmonary arteriovenous fistula (AVF) using a metallic "spider" and spring embolus. Conventional spring embolus or detachable balloon could not be used in these cases. Metallic spider was indicated for pulmonary AVF with a feeding artery diameter of more than 16 mm to prevent embolus passing through the AVF. In the first case, we used large handmade metallic spiders of 25 mm in diameter followed by embolization by numerous spring coils. At that time, a partial monorail technique was newly devised to carry the large metallic spider into the feeding artery, otherwise the spider could not pass into a 9F catheter. After embolization, symptoms and PaO2 in arterial blood improved remarkably in both cases. In the second case, a spring coil migrated into the normal pulmonary artery, but no infarction resulted. In conclusion, the metallic spider was very useful for embolization of hugee pulmonary AVF to avoid the embolus passing through and to tangle spring coils together with it. If commercially available "spiders" are too small, ones can be made easily.

  13. Contact Allergy to Neem Oil.

    NARCIS (Netherlands)

    de Groot, Anton; Jagtman, Berend A; Woutersen, Marjolijn

    2018-01-01

    A case of allergic contact dermatitis from neem oil is presented. Neem oil (synonyms: Melia azadirachta seed oil [INCI name], nim oil, margosa oil) is a vegetable (fixed) oil obtained from the seed of the neem tree Azadirachta indica by cold pressing. Contact allergy to neem oil has been described

  14. Policy Analysis of the Canadian Oil Sands Experience

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2013-09-01

    For those who support U.S. oil sands development, the Canadian oil sands industry is often identified as a model the U.S. might emulate, yielding financial and energy security benefits. For opponents of domestic oil sands development, the Canadian oil sands experience illustrates the risks that opponents of development believe should deter domestic policymakers from incenting U.S. oil sands development. This report does not seek to evaluate the particular underpinnings of either side of this policy argument, but rather attempts to delve into the question of whether the Canadian experience has relevance as a foundational model for U.S. oil sands development. More specifically, this report seeks to assess whether and how the Canadian oil sands experience might be predictive or instructive in the context of fashioning a framework for a U.S. oil sands industry. In evaluating the implications of these underpinnings for a prospective U.S. oil sands industry, this report concentrates on prospective development of the oil sands deposits found in Utah.

  15. From rocks to oil : researchers become the first in the world to determine the age of oil

    Energy Technology Data Exchange (ETDEWEB)

    Crawshaw, C

    2005-06-10

    This article discussed the discovery of a method to accurately determine the age of oil. The discovery was made by two geologists at the University of Alberta, and provides critical information about the formation of oil which will help to better understand oil deposits. The scientists have suggested that the giant oil sand deposits in Alberta were formed 112 million years ago and not 60 million years ago as was previously thought. They used isotopes of rhenium and osmium, elements found in trace amounts in oil, to pinpoint when oil formed in the Western Canada Sedimentary Basin (WCSB), which contains much of the world's oil sands. It was previously thought that the time at which oil was produced from a rock and migrated as fluid could be deduced from looking at geologic relationships. This is the first time that a direct determination using any isotopic method has be applied to determine age. The research findings are expected to change the way geologists understand the evolution of the basin. It was concluded that while the discovery answers some questions about hydrocarbons, many others remain. However, the presence of an absolute number will help geologists to re-evaluate other knowledge. 1 fig.

  16. Biogeochemistry of anaerobic crude oil biodegradation

    Science.gov (United States)

    Head, Ian; Gray, Neil; Aitken, Caroline; Sherry, Angela; Jones, Martin; Larter, Stephen

    2010-05-01

    Anaerobic degradation of crude oil and petroleum hydrocarbons is widely recognized as a globally significant process both in the formation of the world's vast heavy oil deposits and for the dissipation of hydrocarbon pollution in anoxic contaminated environments. Comparative analysis of crude oil biodegradation under methanogenic and sulfate-reducing conditions has revealed differences not only in the patterns of compound class removal but also in the microbial communities responsible. Under methanogenic conditions syntrophic associations dominated by bacteria from the Syntropheaceae are prevalent and these are likely key players in the initial anaerobic degradation of crude oil alkanes to intermediates such as hydrogen and acetate. Syntrophic acetate oxidation plays an important role in these systems and often results in methanogenesis dominated by CO2 reduction by members of the Methanomicrobiales. By contrast the bacterial communities from sulfate-reducing crude oil-degrading systems were more diverse and no single taxon dominated the oil-degrading sulfate-reducing systems. All five proteobacterial subdivisions were represented with Delta- and Gammaproteobacteria being detected most consistently. In sediments which were pasteurized hydrocarbon degradation continued at a relatively low rate. Nevertheless, alkylsuccinates characteristic of anaerobic hydrocarbon degradation accumulated to high concentrations. This suggested that the sediments harbour heat resistant, possibly spore-forming alkane degrading sulfate-reducers. This is particularly interesting since it has been proposed recently, that spore-forming sulfate-reducing bacteria found in cold arctic sediments may have originated from seepage of geofluids from deep subsurface hydrocarbon reservoirs.

  17. Waxy crude oil flow restart ability

    Energy Technology Data Exchange (ETDEWEB)

    Sierra, Andre Gaona; Varges, Priscilla Ribeiro; Mendes, Paulo Roberto de Souza [Dept. of Mechanical Engineering. Pontificia Universidade Catolica do Rio de Janeiro, RJ (Brazil)], e-mails: prvarges@puc-rio.br, pmendes@puc-rio.br; Ziglio, Claudio [PETROBRAS S.A, R.J., Rio de Janeiro, RJ (Brazil)], e-mail: ziglio@petrobras.com.br

    2010-07-01

    Under the hot reservoir conditions, waxy crudes behave like Newtonian fluids but once they experience very cold temperatures on the sea floor, the heavy paraffin's begin to precipitate from the solution impacting non- Newtonian flow behavior to the crude (Chang 2000, Lee 2009, Davidson 2004) and begin to deposit on the pipe wall leave blocked of pipeline. This gel cannot be broken with the original steady state flow operating pressure applied before gelation (Chang 1998). Restarting waxy crude oil flows in pipelines is a difficult issue because of the complex rheological behavior of the gelled oil. Indeed, below the WAT, the gelled oil exhibits viscoplastic, thixotropic, temperature-dependent, and compressible properties due to the interlocking gel-like structure formed by the crystallized paraffin compounds and the thermal shrinkage of the oil. The main objective of this work is to determine the minimal pressure to restart the flow, and the relationship between the fluid rheology , pipe geometry and the restart pressure of the flow. Experiments will be performed to investigate the displacement of carbopol aqueous solutions (viscoplastic fluid without thixotropic effects) by Newtonian oil flowing through a strait pipe to validate the experimental apparatus. Therefore, tests will be made with different fluids, like Laponite and waxy crude oils. (author)

  18. Sedimentological characteristics and depositional processes of sediment gravity flows in rift basins: The Palaeogene Dongying and Shahejie formations, Bohai Bay Basin, China

    Science.gov (United States)

    Liu, Lei; Chen, Hongde; Zhong, Yijiang; Wang, Jun; Xu, Changgui; Chen, Anqing; Du, Xiaofeng

    2017-10-01

    Sediment gravity flow deposits are common, particularly in sandy formations, but their origin has been a matter of debate and there is no consensus about the classification of such deposits. However, sediment gravity flow sandstones are economically important and have the potential to meet a growing demand in oil and gas exploration, so there is a drive to better understand them. This study focuses on sediment gravity flow deposits identified from well cores in Palaeogene deposits from the Liaodong Bay Depression in Bohai Bay Basin, China. We classify the sediment gravity flow deposits into eight lithofacies using lithological characteristics, grain size, and sedimentary structures, and interpret the associated depositional processes. Based on the scale, spatial distribution, and contact relationships of sediment gravity flow deposits, we defined six types of lithofacies associations (LAs) that reflect transformation processes and depositional morphology: LA1 (unconfined proximal breccia deposits), LA2 (confined channel deposits), LA3 (braided-channel lobe deposits), LA4 (unconfined lobe deposits), LA5 (distal sheet deposits), and LA6 (non-channelized sheet deposits). Finally, we established three depositional models that reflect the sedimentological characteristics and depositional processes of sediment gravity flow deposits: (1) slope-apron gravel-rich depositional model, which involves cohesive debris flows deposited as LA1 and dilute turbidity currents deposited as LA5; (2) non-channelized surge-like turbidity current depositional model, which mainly comprises sandy slumping, suspended load dominated turbidity currents, and dilute turbidity currents deposited as LA5 and LA6; and (3) channelized subaqueous-fan depositional model, which consists of non-cohesive bedload dominated turbidity currents, suspended load dominated turbidity currents, and dilute turbidity currents deposited as LA2-LA5, originating from sustained extrabasinal turbidity currents

  19. ANALYSIS ON TECHNOLOGICAL PROCESSES CLEANING OIL PIPELINES

    Directory of Open Access Journals (Sweden)

    Mariana PǍTRAŞCU

    2015-05-01

    Full Text Available In this paper the researches are presented concerning the technological processes of oil pipelines.We know several technologies and materials used for cleaning the sludge deposits, iron and manganese oxides, dross, stone, etc.de on the inner walls of drinking water pipes or industries.For the oil industry, methods of removal of waste materials and waste pipes and liquid and gas transport networks are operations known long, tedious and expensive. The main methods and associated problems can be summarized as follows: 1 Blowing with compressed air.2 manual or mechanical brushing, sanding with water or dry.3 Wash with water jet of high pressure, solvent or chemical solution to remove the stone and hard deposits.4 The combined methods of cleaning machines that use water jets, cutters, chains, rotary heads cutters, etc.

  20. Urban acid deposition

    Energy Technology Data Exchange (ETDEWEB)

    Conlan, D.E.; Longhurst, J.W.S.; Gee, D.R.; Hare, S.E.

    1991-07-01

    In this document results from the Greater Manchester Acid Deposition Survey (GMADS), an urban precipitation chemistry network, for 1990 are presented. Full analytical methods are described along with the precision and accuracy of the methods used. The spatial variability of precipitation chemistry and deposition over this urban region was investigated using a network of twenty collectors. Concentrations of non marine sulphate, ammonium, calcium and hydrogen, and nitrogen dioxide gas concentrations all show significant spatial variability. The spatial variability of the deposition rates of non marine sulphate, nitrate, ammonium, hydrogen and calcium were significant. (Author).

  1. Electroless atomic layer deposition

    Science.gov (United States)

    Robinson, David Bruce; Cappillino, Patrick J.; Sheridan, Leah B.; Stickney, John L.; Benson, David M.

    2017-10-31

    A method of electroless atomic layer deposition is described. The method electrolessly generates a layer of sacrificial material on a surface of a first material. The method adds doses of a solution of a second material to the substrate. The method performs a galvanic exchange reaction to oxidize away the layer of the sacrificial material and deposit a layer of the second material on the surface of the first material. The method can be repeated for a plurality of iterations in order to deposit a desired thickness of the second material on the surface of the first material.

  2. Formation of the oil composition of the Yu0 Bazhenov formation, Salym oil field

    Directory of Open Access Journals (Sweden)

    E.V. Soboleva

    2017-05-01

    Full Text Available The Bazhenov horizon of Western Siberia has been studied in considerable detail from different perspectives and different methods, a large number of studies have been devoted to a wide range of issues related to the lithological composition of rocks, their reservoir properties, the study of organic matter, properties and composition of oil at various analytical levels, and many others. This work is devoted to restoring conditions for the formation of oil properties and composition of the Yu0 Salym oil field, based mainly on the geochemical aspects of the study of oil changes both in area and in the section within the productive layer of Salym structure, using some geological data, such as structural plan for the reflecting horizon B (the roof of the Bazhenov formation, having a complex configuration, reservoir temperatures and pressure, well flow rates, and others. There is no single reservoir at the Salym field in the Yu0 formation. For the conclusions of the geological-geochemical interpretation, a sampling of 61 samples of oil from exploration, appraisal and production wells of the initial stages of production was used, since in the future when oil is extracted, the ecology in the deposits changes, and 21 samples of oil from other fields in the West Siberian oil and gas basin. Conventionally, three types of oils are distinguished, differing in their physicochemical parameters, group hydrocarbon and molecular composition. It was suggested that in addition to the own organic matter of the Bazhenov formation, hydrocarbon fluids of the Vasyugan, Tyumen formations and possibly Paleozoic rocks were involved in the formation of the oil composition. The flow of light liquid hydrocarbons and gases occurred along the zones of faults of different genesis and duration of existence.

  3. Prospects for oil and gas in ultradeep horizons of the Chechen-Ingush ASSR

    Energy Technology Data Exchange (ETDEWEB)

    Yandarbiev, N.Sh.

    1981-01-01

    Described is the modern state of prospecting and exploration for oil and gas in the territory of the Chechen-Ingush ASSR, and the prospects for discovering new deposits of hydrocarbons in ultradeep horizons are substantiated.

  4. Asian oil demand

    International Nuclear Information System (INIS)

    Fesharaki, F.

    2005-01-01

    This conference presentation examined global oil market development and the role of Asian demand. It discussed plateau change versus cyclical movement in the global oil market; supply and demand issues of OPEC and non-OPEC oil; if high oil prices reduce demand; and the Asian oil picture in the global context. Asian oil demand has accounted for about 50 per cent of the global incremental oil market growth. The presentation provided data charts in graphical format on global and Asia-Pacific incremental oil demand from 1990-2005; Asia oil demand growth for selected nations; real GDP growth in selected Asian countries; and, Asia-Pacific oil production and net import requirements. It also included charts in petroleum product demand for Asia-Pacific, China, India, Japan, and South Korea. Other data charts included key indicators for China's petroleum sector; China crude production and net oil import requirements; China's imports and the share of the Middle East; China's oil exports and imports; China's crude imports by source for 2004; China's imports of main oil products for 2004; India's refining capacity; India's product balance for net-imports and net-exports; and India's trade pattern of oil products. tabs., figs

  5. Investigation of transformation of radionuclides in soils oil polluted

    International Nuclear Information System (INIS)

    Humbatov, F.Y.; Ahmedov, M.M.; Ibadov, N.A.; Balayev, V.S.

    2004-01-01

    Full text: Despite of constant improvement in view of last achievement of a science and technique the technological processes of oil production are accompanied by coming in environment a number of chemical substances - oil products, poly aromatic and aromatic hydrocarbons, salts of heavy metals, including soluble and insoluble compound of stable and radioactive isotopes of metals, various gases etc. Technological processes of production, transportation of crude oil and its complex processing is followed with essential pollution of soil by oil products, radioactive substances because of crude oil and grounds waters spillage. The problem of radioactive pollution of environment in oil-extracting sites and especially in old deposits of Apsheron peninsula, in particular, in oil fields of Surakhani and Balakhani by the various factors is rather urgent in Azerbaijan. On a whole, radioactive-ecological situation is defined by the quantitative contents of natural radionuclides, chemical structure of grounds waters and oil, and also accumulation of radioactive substances in pipelines and modular items as crystals radiobarits or calcium and magnesium salts. Systemic and complex research on this direction will allow creating the mechanism of radionuclides transformation in oil-contaminated soils. The condition of radioactive background of soil cover of oil field in Surakhani was studied in our researches. The soil samples taken from various depths of deposit are investigated. The quantities of total oil components, aliphatic and poly aromatic hydrocarbons, heavy metals and natural radionuclides are determined. The attempt is made to explain dependence of various meanings of carried out analyses on the depth of taken samples. In summary it is necessary to note, that the researches on more detailed study of influence of the factors on processes of accumulation and transformation natural radionuclides proceed. The systemic researches on this direction will allow securing of

  6. Alluvial Deposits in Iowa

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — This coverage maps alluvial deposits throughout Iowa. This generally would include areas of alluvial soils associated with modern streams that are identified on...

  7. 75 FR 20041 - Deposits

    Science.gov (United States)

    2010-04-16

    ... transmission to (202) 906- 6518; or send an e-mail to [email protected] . OTS will post... DD implements the Truth in Savings Act, part of the Federal Deposit Insurance Corporation Improvement...

  8. Modeled Wet Nitrate Deposition

    Data.gov (United States)

    U.S. Environmental Protection Agency — Modeled data on nitrate wet deposition was obtained from Dr. Jeff Grimm at Penn State Univ. Nitrate wet depostion causes acidification and eutrophication of surface...

  9. Uranium deposit research, 1983

    International Nuclear Information System (INIS)

    Ruzicka, V.; LeCheminant, G.M.

    1984-01-01

    Research on uranium deposits in Canada, conducted as a prerequisite for assessment of the Estimated Additional Resources of uranium, revealed that (a) the uranium-gold association in rudites of the Huronian Supergroup preferably occurs in the carbon layers; (b) chloritized ore at the Panel mine, Elliot Lake, Ontario, occurs locally in tectonically disturbed areas in the vicinity of diabase dykes; (c) mineralization in the Black Sturgeon Lake area, Ontario, formed from solutions in structural and lithological traps; (d) the Cigar Lake deposit, Saskatchewan, has two phases of mineralization: monomineralic and polymetallic; (e) mineralization of the JEB (Canoxy Ltd.) deposit is similar to that at McClean Lake; (f) the uranium-carbon assemblage was identified in the Claude deposit, Carswell Structure; and (g) the Otish Mountains area, Quebec, should be considered as a significant uranium-polymetallic metallogenic province

  10. Automatic Payroll Deposit System.

    Science.gov (United States)

    Davidson, D. B.

    1979-01-01

    The Automatic Payroll Deposit System in Yakima, Washington's Public School District No. 7, directly transmits each employee's salary amount for each pay period to a bank or other financial institution. (Author/MLF)

  11. Deposition of acidifying compounds

    International Nuclear Information System (INIS)

    Fowler, D.; Cape, J.N.; Sutton, M.A.; Mourne, R.; Hargreaves, K.J.; Duyzer, J.H.; Gallagher, M.W.

    1992-01-01

    Inputs of acidifying compounds to terrestrial ecosystems include deposition of the gases NO 2 , NO, HNO 2 , HNO 3 , NH 3 and SO 2 and the ions NO 3- , NH 4+ , SO 4 2- and H + in precipitation, cloud droplets and particles. Recent research has identified particular ecosystems and regions in which terrestrial effects are closely linked with specific deposition processes. This review paper identifies areas in which important developments have occurred during the last five years and attempts to show which aspects of the subject are most important for policy makers. Amongst the conclusions drawn, the authors advise that current uncertainties in estimates of S and N inputs by dry deposition should be incorporated in critical load calculations, and that, in regions dominated by wet deposition, spatial resolution of total inputs should be improved to match the current scales of information on landscape sensitivity to acidic inputs. 44 refs., 9 figs

  12. Speleothem (Cave Deposit) Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Records of past temperature, precipitation, and other aspects of climate derived from mineral deposits found in caves. Parameter keywords describe what was measured...

  13. Opportunities for Automation, Internet of Things, Big Data Analytics and 3D Printing within Oil and Gas Drilling, Production and Transport.

    OpenAIRE

    Amundrud, Paul Nicoal

    2017-01-01

    Master's thesis in Offshore technology The oil price drop of 2014 caused huge concerns for O&G (oil and gas) producers around the world, as their revenues suddenly fell rapidly. The high revenues of earlier years made spending into people and project unproblematic, even without profits in mind. When prices dropped, unprofitable projects and people were dismissed in order to reduce operation expenses to accommodate the new O&G prices. While this method is a fast and effective way of reducin...

  14. Learning through Oil and Gas Exploration

    DEFF Research Database (Denmark)

    Levitt, Clinton J.

    I investigate the importance of learning in oil and gas exploration. I developed a tractable dynamic structural model of oil and gas exploration in which firms gradually learn about the productive qualities of different regions through exploratory drilling. Exploratory drilling is modelled...... as an information-gathering process in which each new exploratory well provides information concerning the profitability of drilling additional wells in a given area. The model is geographically based and accounts for the heterogeneity in the characteristics of oil and gas deposits that can exist across large...... the observed geography of exploratory drilling. The broader implications of my model indicate that the structure of information has important effects on drilling behaviour, and that these effects vary, depending on the specific characteristics of the regions being explored....

  15. Hollow rods for the oil producing industry

    Energy Technology Data Exchange (ETDEWEB)

    Khalimova, L M; Elyasheva, M A

    1970-01-01

    Hollow sucker rods have several advantages over conventional ones. The hollow rods actuate the well pump and at the same time conduct produced fluids to surface. When paraffin deposition occurs, it can be minimized by injecting steam, hot oil or hot water into the hollow rod. Other chemicals, such as demulsifiers, scale inhibitors, corrosion inhibitors, etc., can also be placed in the well through the hollow rods. This reduces cost of preventive treatments, reduces number of workovers, increases oil production, and reduces cost of oil. Because the internal area of the rod is small, the passing liquids have a high velocity and thereby carry sand and dirt out of the well. This reduces pump wear between the piston and the plunger. Specifications of hollow rods, their operating characteristics, and results obtained with such rods under various circumstances are described.

  16. Production of oil from Israeli oil shale

    International Nuclear Information System (INIS)

    Givoni, D.

    1993-01-01

    Oil shale can be utilized in two-ways: direct combustion to generate steam and power or retorting to produce oil or gas. PAMA has been developing both direct combustion and retorting processes. Its main effort is in the combustion. An oil shale fired steam boiler was erected in the Rotem industrial complex for demonstration purposes. PAMA has also been looking into two alternative retorting concepts - slow heating of coarse particles and fast heating of fine particles. The present paper provides operating data of oil shale processing in the following scheme: (a) retorting in moving bed, pilot and bench scale units, and (b) retorting in a fluidized bed, bench scale units. (author)

  17. Mexican oil industry: Shifting to difficult oil

    Energy Technology Data Exchange (ETDEWEB)

    Bazan G., Gerardo; Gonzalez, Cristobal J.

    2010-09-15

    Mexico has stepped into an important transition of declining oil fields and new challenging oil projects. The aim of this paper is to show a new perspective of the oil resources that have been exploited throughout the Mexican territory, as well as the remaining resources yet to be exploited. We have developed a resources/production-costs chart that illustrates the historical and future development of the Mexican oil industry, showing the shift that the industry will face in the coming years; this chart was taken from a model already in use by the most prestige energy agencies in the world.

  18. Turbidity and oil removal from oilfield produced water, middle oil company by electrocoagulation technique

    Directory of Open Access Journals (Sweden)

    Mohammed Thamer

    2018-01-01

    Full Text Available Huge quantity of produced water is salty water trapped in the oil wells rock and brought up along with oil or gas during production. It usually contains hydrocarbons as oil and suspended solids or turbidity. Therefore the aim of this study is to treat produced water before being discharge to surface water or re injected in oil wells. In this paper experimental results were investigated on treating produced water (which is obtained from Middle Oil Company-Iraq, through electrocoagulation (EC. The performance of EC was investigated for reduction of turbidity and oil content up to allowable limit. Effect of different parameters were studied; (pH, current density, distance between two electrodes, and electrolysis time. The experimental runs carried out by an electrocoagulation unit was assembled and installed in the lab and the reactor was made of a material Perspex, with a capacity of approximately 2.5 liters and dimensions were 20 cm in length, 14 cm in width and 16 cm height. The electrodes employed were made of commercial materials. The anode was a perforated aluminum rectangular plate with a thickness of 1.72 mm, a height of 60 mm and length of 140 mm and the cathode was a mesh iron. The current was used in the unit with different densities to test the turbidity removing efficiency (0.0025, 0.00633, 0.01266 and 0.0253 A/cm2.The experiment showed that the best turbidity removing was (10, 9.7, 9.2, 18 NTU respectively. The distance between the electrodes of the unit was 3cm. The present turbidity removing was 92.33%. A slight improvement of turbidity removing was shown when the distance between the electrodes was changed from 0.5 to 3 cm with fixation of current density. The best turbidity removing was 93.5% , (7.79 NTU when the distance between the electrodes were 1 cm. The experimental results found that concentration of oil had decreased to (10.7, 11.2, 11.7, 12.3 mg/l when different current densities (0.00253, 0.00633, 0.01266, 0.0253 A/cm2

  19. Fractional distillation of oil

    Energy Technology Data Exchange (ETDEWEB)

    Jones, L D

    1931-10-31

    A method of dividing oil into lubricating oil fractions without substantial cracking by introducing the oil in a heated state into a fractionating column from which oil fractions having different boiling points are withdrawn at different levels, while reflux liquid is supplied to the top of the column, and additional heat is introduced into the column by contacting with the oil therein a heated fluid of higher monlecular weight than water and less susceptible to thermal decomposition than is the highest boiling oil fraction resulting from the distillation, or of which any products produced by thermal decomposition will not occur in the highest boiling distillate withdrawn from the column.

  20. Huge opportunity for solar cooling

    International Nuclear Information System (INIS)

    Rowe, Daniel

    2014-01-01

    In Europe more than 400 solar cooling systems have been installed. By contrast, only a small number of solar cooling installations exist in Australia - primarily adsorption and absorption systems for commercial and hospitals - although these systems are growing. As with other renewable energy technologies, cost is a challenge. However solar cooling is currently competitive with other technologies, with some suggesting that system costs have been decreasing by about 20% per annum in recent times. Australia is also leading efforts in the development of residential solar desiccant technology, currently commercialising Australian-developed technology. Commercial and industrial enterprises are increasingly aware of the impact of demand charges, the potential to install technology as a hedge against future energy price rises and opportunities associated with increased on-site generation and reduced reliance on the grid, often necessitating on-site demand reduction and management. They are also driven by environmental and corporate social responsibility objectives as well as the opportunity for energy independence and uninterruptible operation. Interestingly, many of these interests are mirrdred at residential level, inspiring CSIRO's commercialisation of a domestic scale solar air conditioner with Australian manufacturer Brevis Climate Systems. Australia and other countries are increasingly aware of solar cooling as technology which can reduce or replace grid-powered cooling, particularly in applications where large building thermal energy requirements exist. In these applications, heating, cooling and hot water are generated and used in large amounts and the relative amounts of each can be varied dynamically, depending on building requirements. Recent demonstrations of solar cooling technology in Australia include Hunter TAFE's Solar Desiccant Cooling System - which provides heating, cooling and hot water to commercial training kitchens and classrooms - GPT's Charlestown Square Shopping Centre and Echuca Hospital. These systems join a number of others already in operation at the large commercial and industrial scale, as well as a smaller number of systems providing cooling to cafes and offices. The development in this area is being supported by CSIRO's Solar Cooling research team which provides development, modelling and design expertise across the spectrum of solar cooling variants, sizes and applications - from remote community food preservation in India, to large commercial and residential systems in Australia. The group also has industry test facilities to support the development and testing of solar air conditioning systems as well as conventional air conditioning technologies. The Australian Institute of Refrigeration Air Conditioning and Heating (AIRAH's) Solar Cooling Special Technical Group is also involved in developing the solar cooling industry in Australia with the aim of combating climate change by reducing greenhouse emissions from the residential and commercial building sectors. The group coordinates industry and research efforts and organises information exchange, educational and training events for interested technical and business representatives. Fact file- Solar cooling systems are essentially comprised of two parts - solar thermal collectors and a sorption chiller which convert the heat into useful cooling. Though a number of collector and chiller combinations exist, no one single approach has yet dominated. Corresponding with the type of chiller used, solar cooling systems are often grouped into three categories: absorption, adsorption and desiccant. During design, an appropriate collector technology will be chosen, typically either a parabolic, flat plate or evacuated tube collector. The optimal configuration is also determined in design, to align equipment characteristics with the conditions, environment and requirements presented by each application. Thus solar cooling has a number of variants which use different components or the same components in an alternate configuration. A number of variants are technically proven and available for commercial and industrial installations. Each variant uses standard 'off the shelf' FIVAC industry components which are available in both Australia and overseas. A typical solar cooling system is also able to supply broader energy needs of a building including space heating and hot water.

  1. Gemstone deposits of Serbia

    Directory of Open Access Journals (Sweden)

    Miladinović Zoran

    2016-06-01

    Full Text Available Gemstone minerals in Serbia have never been regarded as an interesting and significant resource. Nevertheless, more than 150 deposits and occurrences have been recorded and some of them preliminarily explored in the last 50 years. The majority of deposits and occurrences are located within the Serbo-Macedonian metallogenic province and the most significant metallogenic units at the existing level of knowledge are the Fruska Gora ore district, Cer ore district, Sumadija metallogenic zone, Kopaonik metallogenic zone and Lece-Halkidiki metallogenic zone. The most important genetic type of deposits is hydrothermal, particularly in case of serpentinite/peridotite as host/parent rock. Placer deposits are also economically important. The dominant gemstones are silica minerals: chalcedony (Chrysoprase, carnelian, bluish chalcedony etc., jasper (picture, landscape, red etc., common opal (dendritic, green, milky white etc., silica masses (undivided, and quartz (rock crystal, amethyst etc.. Beside silica minerals significant gemstones in Serbia include also beryl (aquamarine, garnet (almandine and pyrope, tourmaline, fluorite, rhodochrosite, carbonate-silica breccia, carbonate-silica onyx, silicified wood, howlite, serpentinite, marble onyx, and kyanite. This paper aims to present an overview of Serbian gemstone deposits and occurrences and their position based on a simplified gemstone metallogenic map of Serbia, as well as genetic-industrial classification of gemstone deposits and gemstone varieties.

  2. Uranium deposits in Africa

    International Nuclear Information System (INIS)

    Wilpolt, R.H.; Simov, S.D.

    1979-01-01

    Africa is not only known for its spectacular diamond, gold, copper, chromium, platinum and phosphorus deposits but also for its uranium deposits. At least two uranium provinces can be distinguished - the southern, with the equatorial sub-province; and the south Saharan province. Uranium deposits are distributed either in cratons or in mobile belts, the first of sandstone and quartz-pebble conglomerate type, while those located in mobile belts are predominantly of vein and similar (disseminated) type. Uranium deposits occur within Precambrian rocks or in younger platform sediments, but close to the exposed Precambrian basement. The Proterozoic host rocks consist of sediments, metamorphics or granitoids. In contrast to Phanerozoic continental uranium-bearing sediments, those in the Precambrian are in marginal marine facies but they do contain organic material. The geology of Africa is briefly reviewed with the emphasis on those features which might control the distribution of uranium. The evolution of the African Platform is considered as a progressive reduction of its craton area which has been affected by three major Precambrian tectonic events. A short survey on the geology of known uranium deposits is made. However, some deposits and occurrences for which little published material is available are treated in more detail. (author)

  3. Gemstone deposits of Serbia

    Science.gov (United States)

    Miladinović, Zoran; Simić, Vladimir; Jelenković, Rade; Ilić, Miloje

    2016-06-01

    Gemstone minerals in Serbia have never been regarded as an interesting and significant resource. Nevertheless, more than 150 deposits and occurrences have been recorded and some of them preliminarily explored in the last 50 years. The majority of deposits and occurrences are located within the Serbo-Macedonian metallogenic province and the most significant metallogenic units at the existing level of knowledge are the Fruska Gora ore district, Cer ore district, Sumadija metallogenic zone, Kopaonik metallogenic zone and Lece-Halkidiki metallogenic zone. The most important genetic type of deposits is hydrothermal, particularly in case of serpentinite/peridotite as host/parent rock. Placer deposits are also economically important. The dominant gemstones are silica minerals: chalcedony (Chrysoprase, carnelian, bluish chalcedony etc.), jasper (picture, landscape, red etc.), common opal (dendritic, green, milky white etc.), silica masses (undivided), and quartz (rock crystal, amethyst etc.). Beside silica minerals significant gemstones in Serbia include also beryl (aquamarine), garnet (almandine and pyrope), tourmaline, fluorite, rhodochrosite, carbonate-silica breccia, carbonate-silica onyx, silicified wood, howlite, serpentinite, marble onyx, and kyanite. This paper aims to present an overview of Serbian gemstone deposits and occurrences and their position based on a simplified gemstone metallogenic map of Serbia, as well as genetic-industrial classification of gemstone deposits and gemstone varieties.

  4. Heavy mineral concentration from oil sand tailings

    Energy Technology Data Exchange (ETDEWEB)

    Chachula, F.; Erasmus, N. [Titanium Corp. Inc., Regina, SK (Canada)

    2008-07-01

    This presentation described a unique technique to recover heavy minerals contained in the froth treatment tailings produced by oil sand mining extraction operations in Fort McMurray, Alberta. In an effort to process waste material into valuable products, Titanium Corporation is developing technology to recover heavy minerals, primarily zircon, and a portion of bitumen contained in the final stage of bitumen processing. The process technology is being developed to apply to all mined oil sands operations in the Fort McMurray region. In 2004, Titanium Corporation commissioned a pilot research facility at the Saskatchewan Research Council to test dry oil sands tailings. In 2005, a bulk sampling pilot plant was connected to the fresh oil sands tailings pipeline on-site in Fort McMurray, where washed sands containing heavy minerals were processed at a pilot facility. The mineral content in both deposited tailings and fresh pipeline tailings was assessed. Analysis of fresh tailings on a daily basis identified a constant proportion of zircon and higher levels of associated bitumen compared with the material in the deposited tailings. The process flow sheet design was then modified to remove bitumen from the heavy minerals and concentrate the minerals. A newly modified flotation process was shown to be a viable processing route to recover the heavy minerals from froth treatment tailings. 8 refs., 9 tabs., 12 figs.

  5. Impacts of channel deposition on the risk of flooding in a watershed

    Science.gov (United States)

    Ting-Yue, Hong; Chia-Ling, Chang

    2017-04-01

    Taiwan is located in East Asian where is always hit by typhoons. Typhoons usually bring huge amounts of rainfall and result in the problems of channel deposition. Deposition influences the functions of channel and increases the risk of flooding. The Luliao Reservoir Watershed is the case area in this study. It is the major water source for agricultural activity and domestic use. The objective of this study is to assess the possible impacts of channel deposition on the watershed environment. This study applies the Storm Water Management Model (SWMM) to predict the hydrologic responses and evaluate the risk of flooding. The results show that the decrease of cross section induced by deposition in a channel may increase the risk of flooding and impact the safety of watershed environment. Therefore, canal desilting is important in channel regulation. The discussion and analysis can be useful references for channel regulation.

  6. Khadum Formation of Pre-Caucasus region as potential source of oil shales: geology and geochemistry

    Directory of Open Access Journals (Sweden)

    N.Sh. Yandarbiev1

    2017-05-01

    Full Text Available One of the main modern aim for oil industry is the development of hydrocarbon extraction technologies from «oil shale». In Russia there are kerogen-saturated carbonate-clayey-siliceous deposits of the Bazhenov Formation, carbonate rocks of the Volga-Ural and Timan-Pechora oil and gas bearing basins and clayey Maikop series of Pre-Caucasus region. The Khadum Formation is lower part of the Maikop series represented by carbonate-clay and clayey deposits. On the basis of long-term field and laboratory investigation conducted by specialists of the Oil and Gas Department from Geological Faculty of the Lomonosov Moscow State University. a comprehensive study of the lithological composition, structure, geochemical, hydrogeological and hydrodynamic characteristics of the Paleogene section and monitoring of the drilled wells, the prospects of the oil and gas potential of the Khadum deposits of the Oligocene in the Eastern Pre-Caucasus oil and gas bearing basin were estimated. 11 gas and 19 oil deposits are discovered within the Khadum deposits, and they are confined to the sand layers and lenses, but most of the Khadum section belongs to «unconventional» sources of hydrocarbons. Based on the integrated approach, a map of oil and gas potential prospects for the Khadum deposits was constructed. Highly prospective territories for drilling for oil, areas with small and medium perspectives, and gas prospecting areas have been singled out. Recommendations are given for drilling and technology for the development of the Pre-Caucasus oil shales, based on the world experience in the development of such formations.

  7. Oil prospection using the tectonic plate model

    Science.gov (United States)

    Pointu, Agnès

    2015-04-01

    Tectonic plate models are an intellectual setting to understand why oil deposits are so uncommon and unequally distributed and how models can be used in actual oil and gas prospection. In this case, we use the example of the Ghawar deposit (Saudi Arabia), one of the largest producing well in the world. In the first step, physical properties of rocks composing the oil accumulation are studied by laboratory experiments. Students estimate the porosity of limestone and clay by comparing their mass before and after water impregnation. Results are compared to microscopic observations. Thus, students come to the conclusion that oil accumulations are characterized by superposition of rocks with very different properties: a rich organic source rock (clays of the Hanifa formation), a porous reservoir rock to store the petroleum in (limestones of the Arab formation) and above an impermeable rock with very low porosity (evaporites of the Tithonien). In previous lessons, students have seen that organic matter is usually mineralized by bacteria and that this preservation requires particular conditions. The aim is to explain why biomass production has been so important during the deposit of the clays of the Hanifa formation. Tectonic plate models make it possible to estimate the location of the Arabian Peninsula during Jurassic times (age of Hanifa formation). In order to understand why the paleo-location of the Arabian Peninsula is important to preserve organic matter, students have different documents showing: - That primary production of biomass by phytoplankton is favored by climatic conditions, - That the position of continents determinate the ocean currents and the positions of upwelling zones and zones where organic matter will be able to be preserved, - That north of the peninsula there was a passive margin during Jurassic times. An actual seismic line is studied in order to highlight that this extensive area allowed thick sedimentary deposits to accumulate and that fast

  8. Development and simulation of the air-jack for emergency like a huge disaster; Kyujoyo eajakki no kaihatsu to sono simyureshon

    Energy Technology Data Exchange (ETDEWEB)

    Katsuyama, Kunihisa.; Ogata, Yuji.; Wada, Yuji. [National Institute for Resources and Environment, Tsukuba (Japan); Hashizume, Kiyoshi.; Nishida, Kenjiro. [Nippon Kayaku Corp., Tokyo (Japan)

    1999-02-28

    When a disaster is so huge like Kobe earthquake, every energy line is killed. Even if we want to help the sufferers, we have no energy to move machines to help them. As collapsed houses are very heavy, we need machines to remove collapsed stuff. Explosives include a lot of energy in themselves. So, an air-jack which has explosives inside was developed to remove collapsed stuff on suffered people. A simple air-jack was made and tested. One concrete block, 50cm x 50cm x 50cm, was lifted by the simple air-jack. A simulation of lifting the concrete block was carried out with a programme ANSYS on the super computer. (author)

  9. Three pillars for achieving quantum mechanical molecular dynamics simulations of huge systems: Divide-and-conquer, density-functional tight-binding, and massively parallel computation.

    Science.gov (United States)

    Nishizawa, Hiroaki; Nishimura, Yoshifumi; Kobayashi, Masato; Irle, Stephan; Nakai, Hiromi

    2016-08-05

    The linear-scaling divide-and-conquer (DC) quantum chemical methodology is applied to the density-functional tight-binding (DFTB) theory to develop a massively parallel program that achieves on-the-fly molecular reaction dynamics simulations of huge systems from scratch. The functions to perform large scale geometry optimization and molecular dynamics with DC-DFTB potential energy surface are implemented to the program called DC-DFTB-K. A novel interpolation-based algorithm is developed for parallelizing the determination of the Fermi level in the DC method. The performance of the DC-DFTB-K program is assessed using a laboratory computer and the K computer. Numerical tests show the high efficiency of the DC-DFTB-K program, a single-point energy gradient calculation of a one-million-atom system is completed within 60 s using 7290 nodes of the K computer. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  10. Deep earth fluids and huge metallogenetic belt and fatal geological disaster: 60th anniversary of Professor Du Le-tian engaging in geology

    International Nuclear Information System (INIS)

    Ou Guangxi; Tao Shizhen; Liu Yinhe

    2012-01-01

    Professor Du Le-tian has been researching for a long time on scientific relationship between deep earth fluids and hydrocarbon accumulation and metallogenesis, as well as gestation and prediction of disasters. He has contributed greatly to the development of that scientific field. From 6 to 8, July, 2012, 'Workshop on Deep Earth Fluids and Huge Metallogenetic Belt, Fatal Geological Disaster, as well as 60 th Anniversary of Professor Du Le-tian Engaging in Geology' was successfully convened in Beijing, totally with 76 delegates present who were experts, scholars or students from USA, Hong Kong, or various institutes, colleges or universities of China. In the workshop, the scientific presentations discussed were counted up to 49, on aspects of geological processes of deep earth fluids, relationship between earth degassing and hydrocarbon accumulation or metallogenesis, gestating mechanism of volcanic eruptions and strong earthquakes as well as their relations with mine gas outburst, high-temperature and high-pressure experimental earth science, etc.. (authors)

  11. Logistics: Price Rises Incurred by High Oil Price

    Institute of Scientific and Technical Information of China (English)

    Lai Zhihui

    2011-01-01

    @@ "When the oil price grows by 100%, the logistic indus-try will see a price growth of 40%, while the logistics in-dustry a price rise of 35%, which means every price increase of 5% in the oil price will bring along that of 2% in this industry." said Liu Zongsheng, General Manager of Itochu Logistics Co., Ltd., on the seminar "Focusing on the eco-nomic consequences of raising oil price, interest rate and deposit reserve ratio", which was held recently.

  12. Temperature control of thermal-gas-dynamical installation in cleaning oil-well tubes

    Science.gov (United States)

    Penner, V. A.; Martemyanov, D. B.; Pshenichnikova, V. V.

    2017-08-01

    The article provides the study results of cleaning oil-well tubes, the oil-well tube failure reasons for service by their types have been considered. The chemical method of cleaning oil-well tubes as the least expensive has been reviewed when acid solution moves to the interptube space mixing up with oil and liquidates paraffin and pitches deposits on the internal pipe surface. Except the chemical method of pipes cleaning the mechanical one was considered as well. Also the disadvantages -such as the low productivity of cleaning and design complexity- of this deposits removal method on the internal oil-well tube surface have been considered. An effective method for cleaning oil-well tubing from paraffin and pitches by the thermodynamic plant based on the aircraft engine has been introduced for the first time. The temperature distribution graph in the gas stream at the engine output has been given.

  13. Transesterification of jojoba oil, sunflower oil, neem oil, rocket seed oil and linseed oil by tin catalysts

    International Nuclear Information System (INIS)

    Shah, Mazloom; Tariq, Muhammad; Ali, Saqib; Guo, Qing-Xiang; Fu, Yao

    2014-01-01

    The methanolysis of jojoba oil has been studied in the presence of tin powder, dibutyltin diacetate (C 4 H 9 ) 2 Sn(OOCCH 3 ) 2 , dioctyltin diacetate (C 8 H 17 ) 2 Sn(OOCCH 3 ) 2 , dibutyltin oxide (C 4 H 9 ) 2 SnO, dioctyltin oxide (C 8 H 17 ) 2 SnO, diphenyltin oxide (C 6 H 5 ) 2 SnO, dibutyltin chloride dihydroxide (C 4 H 9 ) 2 Sn(OH) 2 Cl, butyltinhydroxide hydrate (C 4 H 9 )Sn(=O)OH.xH 2 O, Ni nanoparticles and Pd nanoparticles act as catalysts. Among these, 1 weight % of dibutyltin diacetate shows the maximum conversion. Then, methanolysis of sunflower oil, neem oil, rocket seed oil and linseed oil into methyl esters studied in the presence of 1% dibutyltin diacetate as a catalyst and was compared their percentage conversions. The experimental yield for the conversion of jojoba oil, sunflower oil, neem oil, rocket seed oil and linseed oil into biodiesel was found to be 71%, 51%, 50.78%, 40.90% and 39.66%, respectively. The experimental yield of the conversion of jojoba oil into methyl esters was found to be increased up to 96% by increasing reaction time, without emulsion formation. The synthesis of jojoba seed oil biodiesel (JSOB), soybean oil biodiesel (SOB), neem oil biodiesel (NOB), rocket seed oil biodiesel (RSOB) and linseed oil biodiesel (LSOB) was confirmed by NMR ( 1 H and 13 C) and FT-IR analyses of biodiesel. - Highlights: • Transesterification of jojoba oil into biodiesel by tin and nano catalysts. • 1 weight % dibutyltin diacetate showed highest yield at 60 °C. • Catalytic conversion comparison of five oils using dibutyltin diacetate • The experimental yield of the conversion of jojoba oil increased with time. • FT-IR and NMR ( 1 H and 13 C) characterization

  14. Deposition of micron liquid droplets on wall in impinging turbulent air jet

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Tianshu; Nink, Jacob; Merati, Parviz [Western Michigan University, Department of Mechanical and Aeronautical Engineering, Kalamazoo, MI (United States); Tian, Tian; Li, Yong [Massachusetts Institute of Technology, Sloan Automotive Laboratory, Cambridge, MA (United States); Shieh, Tom [Toyota Technical Center, Toyota Motor Engineering and Manufacturing North America, Inc, Ann Arbor, MI (United States)

    2010-06-15

    The fluid mechanics of the deposition of micron liquid (olive oil) droplets on a glass wall in an impinging turbulent air jet is studied experimentally. The spatial patterns of droplets deposited on a wall are measured by using luminescent oil visualization technique, and the statistical data of deposited droplets are obtained through microscopic imagery. Two distinct rings of droplets deposited on a wall are found, and the mechanisms of the formation of the inner and outer rings are investigated based on global diagnostics of velocity and skin friction fields. In particular, the intriguing effects of turbulence, including large-scale coherent vortices and small-scale random turbulence, on micron droplet deposition on a wall and coalescence in the air are explored. (orig.)

  15. Long-term deposition patterns of airborne wastes in the North-East of Estonia

    International Nuclear Information System (INIS)

    Kaasik, M.; Kaasik, H.

    1999-01-01

    The deposition loads of fly ash and sulfur have been high in the North-East Estonia since the late fifties, when the oil shale energetics, chemical and cement industry achieved the remarkable extent. The combined effects of both pollutants have seriously damaged sensitive ecosystems (forest on podsolic soils and bog). Most of sulphur deposition is closely related to the oil shale fly ash deposition. The main effects are related with alkalisation due to accumulation of fly ash components and the Sphagnum growth inhibition due to sulfur load. These effects have the time scale of several years or even more. The pollution loads have been changed during recent 40 years due to launching and reconstruction of enterprises (incl. purification systems) and variations of production capacity. First representative data on air pollution deposition originate from the middle of eighties. Only model estimations could be used to quantify the deposition fluxes before that time, as well as for assessing the future scenarios

  16. Enhanced oil recovery by CO{sub 2} injection

    Energy Technology Data Exchange (ETDEWEB)

    Moctezuma Berthier, Andres E. [Instituto Mexicano del Petroleo, Mexico, D.F. (Mexico)

    2008-07-15

    Firstly are presented some basic concepts on the enhanced oil recovery; then a description is made of where the oil deposits in Mexico are located; comments are made over what has been done in Mexico in terms of enhanced oil recovery, the projects of the Instituto Mexicano del Petroleo that have dealt with the subject of enhanced oil recovery, and finally an approach is presented towards the problem of oil recovery using CO{sub 2}. [Spanish] Primeramente se presentan unos conceptos basicos sobre la recuperacion mejorada de petroleo; luego se hace una descripcion de donde se encuentran los yacimientos de petroleo en Mexico; se comenta sobre que se ha hecho en Mexico en terminos de recuperacion mejorada de petroleo; se mencionan los proyectos del Instituto Mexicano del Petroleo que han abordado el tema de la recuperacion mejorada del petroleo y por ultimo se presenta un enfoque hacia el problema de la recuperacion del petroleo usando CO{sub 2}.

  17. Investigation of Deposit Formation Mechanisms for Engine In-cylinder Combustion and Exhaust Systems Using Quantitative Analysis and Sustainability Study

    Science.gov (United States)

    Ye, Z.; Meng, Q.; Mohamadian, H. P.; Wang, J. T.; Chen, L.; Zhu, L.

    2007-06-01

    The formation of SI engine combustion deposits is a complex phenomenon which depends on various factors of fuel, oil, additives, and engine. The goal of this study is to examine the effects of operating conditions, gasoline, lubricating oil, and additives on deposit formation. Both an experimental investigation and theoretical analysis are conducted on a single cylinder engine. As a result, the impact of deposits on engine performance and exhaust emissions (HC, NO x ) has been indicated. Using samples from a cylinder head and exhaust pipe as well as switching gases via the dual-gas method (N2, O2), the deposit formation mechanism is thoroughly investigated via the thermogravity analysis approach, where the roles of organic, inorganic, and volatile components of fuel, additives, and oil on deposit formation are identified from thermogravity curves. Sustainable feedback control design is then proposed for potential emission control and performance optimization

  18. Oil and democracy in Argentina, 1916-1930

    International Nuclear Information System (INIS)

    Biddle, N.L.

    1991-01-01

    Argentine society in the 1920s experience strong political, cultural, and economic divisions between the littoral regional surrounding Buenos Aires and the interior provinces to the west and north. Economic recession through World War 1 sparked efforts to wean the economy from total dependence upon agricultural production and export, and petroleum deposits in the south and northwest corners of Argentina offered a wider economic base. Regional conflict quickly arose concerning oil production and control over oil revenues. By mounting a popular anti-imperialist campaign against Standard Oil of New Jersey, the primary interior oil producer, dominant political forces in Buenos Aires worked to nationalize all oil deposits to the detriment of interior provincial interests. To maintain the kinds of political control necessary to fend off this threat, interior conservatives reverted to electoral fraud and violence, especially in the major oil-producing province of Salta. This thesis reconstructs and analyzes the process by which political division on the oil issue hardened and gave way to a conservative reaction leading to an authoritarian regime

  19. OIL SOLUTIONS POWDER

    Science.gov (United States)

    Technical product bulletin: aka OIL SOLUTIONS POWDER, SPILL GREEN LS, this miscellaneous oil spill control agent used in cleanups initially behaves like a synthetic sorbent, then as a solidifier as the molecular microencapsulating process occurs.

  20. Biodegradation of lubricant oil

    African Journals Online (AJOL)

    M

    2012-09-25

    Sep 25, 2012 ... lubricating oil, showed high biodegradation efficiency for different used lubricating oils. Capability of ..... amount after biodegradation showed no difference in the .... products polluted sites in Elele, Rivers State, Ngeria.

  1. Recycling of used oil

    International Nuclear Information System (INIS)

    Vipulanandan, C.; Ghurye, G.

    1992-01-01

    This paper reports on used oil which is a valuable resource that should be recycled. Recycling used oil saves energy and natural resources. Used oil can be reprocessed and used as fuel in industrial burners and boilers. Unfortunately, more than 400 million gallons/year of used oil is lost through widespread dumping, partly due to lack of effective recycling procedures. Although used oil is not currently a federally listed hazardous waste, the U.S. EPA has proposed to list it as a hazardous waste, which will make recycling of used oil even more attractive. Laboratory samples, representing used oil, were used for detailed parametric studies and to determine the limitation of extending some of the current physical separation techniques such as sedimentation and centrifuging developed for oil-water and solid-liquid separation

  2. Eucalyptus oil poisoning.

    OpenAIRE

    Patel, S; Wiggins, J

    1980-01-01

    Accidental ingestion of eucalyptus oil by a 3-year-old boy caused profound central nervous system depression within 30 minutes, but he recovered rapidly after gastric lavage. The extreme toxicity of eucalyptus oil is emphasised.

  3. Solubilization of paraffinic deposits for microemulsions

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, Erika A.S.; Soares, Ranieri G.F.; Nascimento, Roseane E.S.; Dantas Neto, Afonso A.; Barros Neto, Eduardo L. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2008-07-01

    The oil company has been intensifying its efforts to find more efficient solutions for the problems related to the paraffin in wells and transport lines. When applied in the flow lines, the solvents dissolve the paraffin and they must be used hot, since the temperature increases the solubility of the wax and, consequently, its removal rate. The microemulsions appear as an alternative capable of acting in the solubilization and in the inhibition of the formation of deposits due to its great interfacial area, low superficial tension and high capacity of solubilization. They present some advantages in relation to the methods of use of chemical products due to its flexibility of composition in which they can be used, presenting low toxicity and inflammability, without any loss of its capacity of solubilization. The use of oil-in-water microemulsion aims to solubilized paraffin in the disperse phase, where one can find the apolar part of the molecule of the surfactant and the also apolar chain of paraffin, occurring, therefore the 'encapsulation' of the crystal, prohibiting the growth of the chain due to the affinity of paraffin and oil. In this in case, it is possible to transport the inserted paraffin in direct micelles, reducing the precipitation and optimizing the transport. (author)

  4. HOW TO MANAGE SUSTAINABLE DEVELOPMENT IN OIL INDUSTRY: THE CASE OF OMV PETROM

    Directory of Open Access Journals (Sweden)

    CATALIN POPESCU

    2017-12-01

    Full Text Available As exploration and exploitation of oil and gas deposits continue to be among the most polluting industrial activities, this paper deals with revealing the way OMV Petrom, a major oil company from Romania, cope with these issues aiming at protecting the environment and ensuring safe and efficient operations in order to achieve sustainable development and constant growth.

  5. Diagnosis of asphaltene stability in crude oil through “two parameters” SVM model

    DEFF Research Database (Denmark)

    Chamkalani, Ali; Mohammadi, Amir H.; Eslamimanesh, Ali

    2012-01-01

    Asphaltene precipitation/deposition and its imposing difficulties are drastic issues in petroleum industry. Monitoring the asphaltene stability conditions in crude oil systems is still a challenge and has been subject of many studies. In this work, the Refractive Index (RI) of several oil samples...... and previously-presented empirical correlations available in open literature. © 2012 Elsevier Ltd....

  6. A new oil crisis?

    International Nuclear Information System (INIS)

    Haffner, R.C.G.; Van Herpt, I.R.Y.

    2000-01-01

    Recent developments in the oil market are discussed, focusing on the causes of recent price increase, expectations for the near future, why previous oil crises resulted into a recession, and the expected consequences of the oil price increase for the economic growth and inflation. The negative consequences of the high oil price for the European economy can be limited under the condition that claims for higher wages are moderate. 2 refs

  7. Oil market outlook

    International Nuclear Information System (INIS)

    Starling, Philip

    1997-01-01

    The role of the International Energy Agency's (IEA) ''OiMarket Report'' is described in terms of its response to and support for oil companies seeking to monitor short-term global oil market developments. The document is increasingly used for reference both by industry and governments. Data is compiled from oil companies, consultants, and government, and OECD countries provide supply/demand oil balance data by product grade on a monthly basic. (UK)

  8. The oil distribution file

    International Nuclear Information System (INIS)

    2009-01-01

    A series of articles addresses the recent evolutions of the French domestic fuel oil market, the development of the Argos oil company (a Dutch group) on this market, the situation and the recent evolution of the German oil product market in 2007 and 2008, the problem faced by the mandatory introduction of biofuels in Belgium and in Spain, the evolution of the Italian oil product market, and the mandatory introduction of biofuels in the United Kingdom in 2008

  9. The use of naturally occurring selectively isolated bacteria for inhibiting paraffin deposition

    Energy Technology Data Exchange (ETDEWEB)

    Lazar, I.; Voicu, A.; Dobrota, S.; Petrisor, I.G.; Stefanescu, M.; Sandulescu, L. [Institute of Biology of the Romanian Academy, Spl. Independentei 296, Bucharest (Romania); Nicolescu, C.; Mucenica, D. [PETROSTAR Ploiesti, Bdul Bucuresti 35, Ploiesti (Romania)

    1999-01-01

    One of the most severe problems at any oil fields producing paraffinic oils is that of paraffin depositions. Romania which has a long experience in oil production is also faced with this problem in many oil fields. The microbial treatment, based on the activity of naturally occurring, selectively isolated bacteria, is already proved as an effective alternative to conventional methods to prevent and remove paraffin damage. Using such kind of bacterial products, exciting results for inhibiting paraffin depositions have been obtained. In this paper results concerning the naturally occurring bacteria selectively isolated from hydrocarbon polluted sites as well as from paraffinic oils, semi-solid and solid paraffin depositions are presented. After a laboratory screening, 15 bacterial strains (BS 1-15), three bacterial consortia (BC 1-3) and a Special Bacterial Consortium (SBC1) were selected. For the selection of bacterial consortia, the classical enrichment culture method has been used. The Special Bacterial Consortium resulted from a mixture of BS 1-15 and BC 1-3 following the steps of the classical enrichment culture method. The BS 1-15, BC 1-3 and SBC1 have been tested for their performances in producing biosurfactants and biosolvents as well as for hydrocarbon utilisation. The SBC1 has been tested for its ability in degradation of hydrocarbons contained in several types of paraffinic or non-paraffinic oils, and then for inhibiting paraffin deposition on a `flow equipment` using two types of paraffinic oils. The SBC1 has been also tested for degradation of hydrocarbons contained in semi-solid and solid paraffin depositions. The results obtained could support further applications to prevent and control paraffin depositions

  10. The use of naturally occurring selectively isolated bacteria for inhibiting paraffin deposition

    International Nuclear Information System (INIS)

    Lazar, I.; Voicu, A.; Dobrota, S.; Petrisor, I.G.; Stefanescu, M.; Sandulescu, L.; Nicolescu, C.; Mucenica, D.

    1999-01-01

    One of the most severe problems at any oil fields producing paraffinic oils is that of paraffin depositions. Romania which has a long experience in oil production is also faced with this problem in many oil fields. The microbial treatment, based on the activity of naturally occurring, selectively isolated bacteria, is already proved as an effective alternative to conventional methods to prevent and remove paraffin damage. Using such kind of bacterial products, exciting results for inhibiting paraffin depositions have been obtained. In this paper results concerning the naturally occurring bacteria selectively isolated from hydrocarbon polluted sites as well as from paraffinic oils, semi-solid and solid paraffin depositions are presented. After a laboratory screening, 15 bacterial strains (BS 1-15), three bacterial consortia (BC 1-3) and a Special Bacterial Consortium (SBC1) were selected. For the selection of bacterial consortia, the classical enrichment culture method has been used. The Special Bacterial Consortium resulted from a mixture of BS 1-15 and BC 1-3 following the steps of the classical enrichment culture method. The BS 1-15, BC 1-3 and SBC1 have been tested for their performances in producing biosurfactants and biosolvents as well as for hydrocarbon utilisation. The SBC1 has been tested for its ability in degradation of hydrocarbons contained in several types of paraffinic or non-paraffinic oils, and then for inhibiting paraffin deposition on a 'flow equipment' using two types of paraffinic oils. The SBC1 has been also tested for degradation of hydrocarbons contained in semi-solid and solid paraffin depositions. The results obtained could support further applications to prevent and control paraffin depositions

  11. Manitoba oil activity review, 1997

    International Nuclear Information System (INIS)

    1998-01-01

    Annual review is presented of Manitoba Crown oil and gas dispositions, mineral owner leasing and revenue, geophysical and drilling activity, areas of activity, oil production and markets, oil prices, value of production, provincial revenue from oil production, surface owners, spills and reclamation, municipal taxes, the Manitoba Drilling Incentive Program, oil reserves, oil industry expenditures, and industry employment. Highlights of the current year are included

  12. Sassafras oil overdose

    Science.gov (United States)

    Sassafras oil comes from the root bark of the sassafras tree. Sassafras oil overdose occurs when someone swallows more than the ... Safrole is the poisonous ingredient in sassafras oil. It is a clear or ... yellow oily liquid. It can be dangerous in large amounts.

  13. Oil Spill Cleanup

    Science.gov (United States)

    Kauble, Christena Ann

    2011-01-01

    Several classroom activities using a model of a seashore and an oil spill demonstrate the basic properties of oil spills in oceans. Students brainstorm about how to best clean up the mess. They work in teams, and after agreeing on how they will proceed, their method is tested by measuring the amount of oil removed and by rating the cleanliness of…

  14. Cod Liver Oil

    Science.gov (United States)

    Cod liver oil can be obtained from eating fresh cod liver or by taking supplements. Cod liver oil is used as a source of vitamin A ... called macular degeneration. Some people put cod liver oil on their skin to speed healing of wounds, ...

  15. Oil Spill Response Manual

    NARCIS (Netherlands)

    Marieke Zeinstra; Sandra Heins; Wierd Koops

    2014-01-01

    A two year programme has been carried out by the NHL University of Applied Sciences together with private companies in the field of oil and chemical spill response to finalize these manuals on oil and chemical spill response. These manuals give a good overview of all aspects of oil and chemical

  16. Oil palm: domestication achieved?

    NARCIS (Netherlands)

    Gerritsma, W.; Wessel, M.

    1997-01-01

    The natural habitat of the oil palm comprises very wet and relatively dry niches in the lowland rain forest in West and Central Africa. The domestication of the oil palm started with the extraction of fruits from wild forest resources. When forests were cleared for shifting cultivation, oil palms

  17. Bulk oil clauses

    International Nuclear Information System (INIS)

    Gough, N.

    1993-01-01

    The Institute Bulk Oil Clauses produced by the London market and the American SP-13c Clauses are examined in detail in this article. The duration and perils covered are discussed, and exclusions, adjustment clause 15 of the Institute Bulk Oil Clauses, Institute War Clauses (Cargo), and Institute Strikes Clauses (Bulk Oil) are outlined. (UK)

  18. OIL AS POLITICAL WEAPON

    Directory of Open Access Journals (Sweden)

    Mariana, BUICAN

    2013-12-01

    Full Text Available Oil (called by some black gold has not always been as coveted and used, but only in the last hundred years has established itself as a highly sought after as an indispensable proper functioning of modern economic activity that an important factor in international politics. International oil regime has changed in the last decades. In 1960, oil regime was a private oligopol which had links with governments main consuming countries. By then the price of a barrel of oil was two U.S. dollars and seven major transnational oil companies decided the amount of oil that will be produced. Meanwhile the world region with the largest oil exports were more strongly expressed nationalism and decolonization. Result, it was so in the late 60s in the region occur independent states. They have created an organization aim of this resource to their advantage - OPEC (Organization of Petroleum Exporting Countries. Thus since 1973 there have been changes in the international regime governing oil field, namely producing countries were fixed production rate and price. After this time the oil weapon has become increasingly important in the management of international relations. Oil influenced the great powers to Middle East conflicts that occurred in the last century, but their attitude about the emergence of new sources of oil outside OPEC. In the late 90's, Russia has become a major supplier of oil to the West.

  19. Perspectives for pyrolysis oil production and market in Scandinavia

    International Nuclear Information System (INIS)

    Sipilae, K.; Oasmaa, A.; Solantausta, Y.; Arpiainen, V.; Nyroenen, T.

    1999-01-01

    Commercial power production from biomass is mainly based on various combustion technologies, new gasification technologies being on pilot and demonstration scale in Europe. From the market viewpoint, there will be an attractive and large market volume for small and medium-scale combined heat and power production (CHP) and for liquid bioenergy products in order to meet the Kyoto challenges in Europe by the year 2010. Biomass pyrolysis technology offers a novel method of converting solid biomass to a liquid product which can easily be transported, stored and utilised for electricity production by diesel engines and gas turbines. The overall efficiency in pyrolysis oil production can be increased from 65 to 90 % (LHV) by integrating the big-oil production to a conventional boiler plant, the-system identified by VTT. A modern diesel power plant has an efficiency of 40 - 44 % with a high power-to-heat ratio. Parallel to diesel power plants, the big-oil can be used in existing heating oil boilers with minor burner modifications. The paper comprises an overview of market assessments in Scandinavia and a summary of pyrolysis oil production, stability and properties tests. The challenge of today is to understand and improve the properties of pyrolysis oils in order to reach a 12-month storage time without any changes in the homogeneity of pyrolysis oils. Reliable operation of oil-fired boilers and diesel power plants has to be demonstrated. As soon as these problems have been solved, biomass pyrolysis technologies will offer new attractive bioenergy market opportunities where a huge potential can be reached by conversing existing petroleum-fired boilers, 0.1 - 10 MW to big-oils and followed by combined heat and power production with high-efficiency diesel power plants in 0.1 - 10 MW scale. Pyrolysis technology is clearly the most attractive method for producing liquid biofuels, compared to bioalcohols and biodiesel. With the present price structure, pyrolysis oil can be

  20. The specifics of operating minor deposits (as given by the examples of gas condensate deposits of the Northern Caucasus

    Directory of Open Access Journals (Sweden)

    Р. А. Гасумов

    2016-08-01

    Full Text Available One of the most important directions in upgrading well productivity in the process of mining hydrocarbons consists in fighting with salt formation and salt deposition. Solving that problem becomes especially actual when operating deposits that are in their final stage of exploitation in complex mining and geological conditions accompanied by deposition of salts in the well foot area of oil bed and their sedimentation on the sub-surface and surface equipment. It provokes a drop in well productivity and results in off-schedule repair works. Specifics are considered of exploiting minor gas condensate deposits of the Northern Caucasus that are operated under complicated mining and geological conditions of anomalously high bed pressures, high temperatures, strong depressions on the beds and inflow of mineralized water from water saturated seams.Processes are studied of salt deposition from heavy hydrocarbons in the well foot and the bed area surrounding it. Water sample analyses data from different wells have demonstrated that the main salts carrier is the associated water, and the principal sedimenting agents are corrosion products, as confirmed by the results of microscopic studies. The dynamics is presented of salt deposition in the “well foot – wellhead – separator” system retrieved from the results of studies of reaction products in the well foot zone of oil bed.It is demonstrated that the efficiency of struggling with salt deposition in the course of mining hydrocarbons depends on comprehensive approach to the problem, the principal thrust lying with prevention of such deposition.Possible ways are considered to prevent precipitation of ferric compounds in the course of operating gas condensate wells, a way is suggested to intensify gas inflow.

  1. Use of derivatives to assess preservation of hydrocarbon deposits

    Science.gov (United States)

    Koshkin, K. A.; Melkishev, O. A.

    2018-05-01

    The paper considers the calculation of derivatives along the surface of a modern and paleostructure map of a Tl2-b formation top used to forecast the preservation of oil and gas deposits in traps according to 3D seismic survey via statistical methods. It also suggests a method to evaluate morphological changes of the formation top by calculating the difference between derivatives. The proposed method allows analyzing structural changes of the formation top in time towards primary migration of hydrocarbons. The comprehensive use of calculated indicators allowed ranking the prepared structures in terms of preservation of hydrocarbon deposits.

  2. Vein type uranium deposits

    International Nuclear Information System (INIS)

    1986-01-01

    Veins are tabular- or sheet-like masses of minerals occupying or following a fracture or a set of fractures in the enclosing rock. They have been formed later than the country rock and fractures, either by filling of the open spaces or by partial or complete replacement of the adjoining rock or most commonly by both of these processes combined. This volume begins with the occurrences and deposits known from old shield areas and the sedimentary belts surrounding them. They are followed by papers describing the European deposits mostly of Variscan age, and by similar deposits known from China being of Jurassic age. The volume is completed by two papers which do not fit exactly in the given scheme. A separate abstract was prepared for each of the 25 papers in this report

  3. Conversion characteristics of 10 selected oil shales

    Energy Technology Data Exchange (ETDEWEB)

    Miknis, F.P.

    1989-08-01

    The conversion behavior of 10 oil shale from seven foreign and three domestic deposits has been studied by combining solid- and liquid-state nuclear magnetic resonance (NMR) measurements with material balance Fischer assay conversion data. The extent of aromatization of aliphatic carbons was determined. Between zero and 42% of the raw shale aliphatic carbon formed aromatic carbon during Fischer assay. For three of the shales, there was more aromatic carbon in the residue after Fisher assay than in the raw shale. Between 10 and 20% of the raw shale aliphatic carbons ended up as aliphatic carbons on the spent shale. Good correlations were found between the raw shale aliphatic carbon and carbon in the oil and between the raw shale aromatic carbon and aromatic carbon on the spent shale. Simulated distillations and molecular weight determinations were performed on the shale oils. Greater than 50% of the oil consisted of the atmospheric and vacuum gas oil boiling fractions. 14 refs., 15 figs., 1 tab.

  4. Utah Heavy Oil Program

    Energy Technology Data Exchange (ETDEWEB)

    J. Bauman; S. Burian; M. Deo; E. Eddings; R. Gani; R. Goel; C.K. Huang; M. Hogue; R. Keiter; L. Li; J. Ruple; T. Ring; P. Rose; M. Skliar; P.J. Smith; J.P. Spinti; P. Tiwari; J. Wilkey; K. Uchitel

    2009-10-20

    The Utah Heavy Oil Program (UHOP) was established in June 2006 to provide multidisciplinary research support to federal and state constituents for addressing the wide-ranging issues surrounding the creation of an industry for unconventional oil production in the United States. Additionally, UHOP was to serve as an on-going source of unbiased information to the nation surrounding technical, economic, legal and environmental aspects of developing heavy oil, oil sands, and oil shale resources. UHOP fulGilled its role by completing three tasks. First, in response to the Energy Policy Act of 2005 Section 369(p), UHOP published an update report to the 1987 technical and economic assessment of domestic heavy oil resources that was prepared by the Interstate Oil and Gas Compact Commission. The UHOP report, entitled 'A Technical, Economic, and Legal Assessment of North American Heavy Oil, Oil Sands, and Oil Shale Resources' was published in electronic and hard copy form in October 2007. Second, UHOP developed of a comprehensive, publicly accessible online repository of unconventional oil resources in North America based on the DSpace software platform. An interactive map was also developed as a source of geospatial information and as a means to interact with the repository from a geospatial setting. All documents uploaded to the repository are fully searchable by author, title, and keywords. Third, UHOP sponsored Give research projects related to unconventional fuels development. Two projects looked at issues associated with oil shale production, including oil shale pyrolysis kinetics, resource heterogeneity, and reservoir simulation. One project evaluated in situ production from Utah oil sands. Another project focused on water availability and produced water treatments. The last project considered commercial oil shale leasing from a policy, environmental, and economic perspective.

  5. What Is the Best Strategy for Enhancing the Effects of Topically Applied Ozonated Oils in Cutaneous Infections?

    Directory of Open Access Journals (Sweden)

    I. Zanardi

    2013-01-01

    Full Text Available Owing to diabetes, atherosclerosis, and ageing, there are several million patients undergoing skin lesions degenerated into infected ulcers with very little tendency to heal and implying a huge socioeconomical cost. Previous medical experience has shown that the daily application of ozonated oil eliminates the infection and promotes a rapid healing. The purpose of the study is the optimization of the antimicrobial effect of ozonated oils by testing in vitro four bacterial species and one yeast without or in the presence of different amounts of human serum. The results obtained suggest that a gentle and continuous removal of debris and exudate is an essential condition for the potent bactericidal effect of ozonated oils. In fact, even small amounts of human serum inactivate ozone derivatives and protect bacteria. The application of ozonated oil preparations is very promising in a variety of skin and mucosal infections. Moreover, ozonated oils are far less expensive than antibiotic preparations.

  6. Was the extreme and widespread marine oil-snow sedimentation and flocculent accumulation (MOSSFA) event during the Deepwater Horizon blow-out unique?

    NARCIS (Netherlands)

    Vonk, S.M.; Hollander, D.J.; Murk, A.J.

    2015-01-01

    During the Deepwater Horizon blowout, thick layers of oiled material were deposited on the deep seafloor. This large scale benthic concentration of oil is suggested to have occurred via the process of Marine Oil Snow Sedimentation and Flocculent Accumulation (MOSSFA). This meta-analysis investigates

  7. Optical thin film deposition

    International Nuclear Information System (INIS)

    Macleod, H.A.

    1979-01-01

    The potential usefulness in the production of optical thin-film coatings of some of the processes for thin film deposition which can be classified under the heading of ion-assisted techniques is examined. Thermal evaporation is the process which is virtually universally used for this purpose and which has been developed to a stage where performance is in almost all respects high. Areas where further improvements would be of value, and the possibility that ion-assisted deposition might lead to such improvements, are discussed. (author)

  8. Radionuclide deposition control

    International Nuclear Information System (INIS)

    1980-01-01

    A method is described for controlling the deposition, on to the surfaces of reactor components, of the radionuclides manganese-54, cobalt-58 and cobalt-60 from a liquid stream containing the radionuclides. The method consists of disposing a getter material (nickel) in the liquid stream, and a non-getter material (tantalum, tungsten or molybdenum) as a coating on the surfaces where deposition is not desired. The process is described with special reference to its use in the coolant circuit in sodium cooled fast breeder reactors. (U.K.)

  9. Deposition potential of polonium

    Energy Technology Data Exchange (ETDEWEB)

    Heal, H. G.

    1948-11-23

    The cathodic deposition potential for polonium in concentrations of 10{sup -13} normal and 8 x 10{sup -13} normal, the former being 100-fold smaller than the smallest concentrations previously studied, has been determined. The value is 0.64 volt on the hydrogen scale. Considering the various ways in which the graphs can reasonably be drawn, we consider the maximum possible error to be of the order of +- 0.03 volt. There is apparently no shift of deposition potential between concentrations of 10{sup -8} and 10{sup -13} normal, indicating that the Nernst equation is not applicable in these circumstances.

  10. New round for oil

    International Nuclear Information System (INIS)

    Delamarche, Myrtille

    2018-01-01

    After three years of crisis, oil companies are now strongly reinvesting, while oil prices are stabilizing at a reasonable long-term level, notably due to a rising demand from developing countries. Examples of new investments made by majors such as Total, Shell or Exxon but also by national companies and junior companies, are given. Oil price evolution as well as cost reductions (thanks notably to the digitalisation of the sector, leading to a decrease in exploration costs) are analyzed. The importance of the US oil production, and particularly shale oil production, is pinpointed

  11. Recovery of hydrocarbon oils

    Energy Technology Data Exchange (ETDEWEB)

    1941-02-10

    A process is disclosed for recovery of hydrocarbon oils, especially lubricating oils or diesel oils, through pressure hydrogenation of distillation, extraction of hydrogenation products from coal or coaly materials or from oils such as mineral oils or tars in liquid phase by use in a reaction vessel of fixed-bed catalysts, characterized in that as starting material is employed material which has been freed of asphaltic and resinous material by hydrogenation refining, vacuum-steam distillation, treatment with hydrogen-rich hydrocarbons (hydroforming), or sulfuric acid.

  12. Reactive polymer fused deposition manufacturing

    Science.gov (United States)

    Kunc, Vlastimil; Rios, Orlando; Love, Lonnie J.; Duty, Chad E.; Johs, Alexander

    2017-05-16

    Methods and compositions for additive manufacturing that include reactive or thermosetting polymers, such as urethanes and epoxies. The polymers are melted, partially cross-linked prior to the depositing, deposited to form a component object, solidified, and fully cross-linked. These polymers form networks of chemical bonds that span the deposited layers. Application of a directional electromagnetic field can be applied to aromatic polymers after deposition to align the polymers for improved bonding between the deposited layers.

  13. Governance of Oil in Africa: Unfinished Business

    Energy Technology Data Exchange (ETDEWEB)

    Lesourne, J.; Ramsay, W.C. [Institut Francais des Relations Internationales (Ifri), 75 - Paris (France); Guichaoua, Y. [Oxford Univ., Department of International Development (United Kingdom); Shaxson, N. [Associate Fellow with the Africa programme at Chatham House (United Kingdom); Magrin, G.; Geert van, Vliet [CIRAD, 75 - Paris (France); Auge, B. [Paris-8 Univ., Institut Francais de Geopolitique, 75 (France)

    2009-07-01

    A closer inspection of the world's oil and gas resources, tempered by a critical assessment of their accessibility, would lead many investors now focused on Russia and the Middle East to turn their attention to the Caspian Basin. But many of these oil and gas provinces are largely off limits for international investors, or the investment conditions have become so unpredictable that investors are forced to look elsewhere for the oil and gas to meet the world's increasing demand. Even if today's economic crisis has taken the urgency out of today's supply and demand balances, economic recovery will soon reveal the need for ever-increasing investment upstream. Other parts of the world may not hold the huge hydrocarbon resources of the Middle East, but there is considerable opportunity elsewhere. This study is dedicated to sub-Saharan Africa where considerable resources have been found and more is no doubt yet to be discovered. Specifically, the countries of the Gulf of Guinea have long been in the oil business and some are now in the gas business. What have the experiences in the oil and gas sectors of these countries been? How has governance evolved over the years and why have some of these countries been unable to realize the full benefits of their resource endowments? The Gulf of Guinea holds considerable promise for more oil and gas for world markets, but the experiences of the past decades suggest a need for substantial reform. Income distribution,welfare, development are not generally the business of energy companies, but if governments do not see to these basic requirements of their populations, energy companies will not be able to bring those energy commodities to the market. This book includes four chapters that examine how energy, governance, corruption, income distribution, and corporate issues are linked. The IFRI program on European Governance and Geopolitics of Energy hopes this publication will shed light on the role of hydrocarbon

  14. The effects of oil price shocks in a new-Keynesian framework with capital accumulation

    International Nuclear Information System (INIS)

    Acurio Vásconez, Verónica; Giraud, Gaël; Mc Isaac, Florent; Pham, Ngoc-Sang

    2015-01-01

    The economic implications of oil price shocks have been extensively studied since the 1970s. Despite this huge literature, no dynamic stochastic general equilibrium model was available that captures two well-known stylized facts: (1) the stagflationary impact of an oil price shock, together with (2) the influence of the energy efficiency of capital on the depth and length of this impact. We build, estimate and simulate a New-Keynesian model with capital accumulation, which takes the case of an economy where oil is imported from abroad, and where these stylized facts can be accounted for. Moreover, the Bayesian estimation of the model on the US economy (1984–2007) suggests that the output elasticity of oil might have been above 10%, stressing the role of oil use in US growth at this time. Finally, our simulations confirm that an increase in energy efficiency significantly attenuates the effects of an oil shock—a possible explanation of why the third oil shock (1999–2008) did not have the same macro-economic impact as the first two ones. These results suggest that oil consumption and energy efficiency have been two major engines for US growth in the last three decades.

  15. Monitoring of pipeline oil spill fire events using Geographical Information System and Remote Sensing

    Science.gov (United States)

    Ogungbuyi, M. G.; Eckardt, F. D.; Martinez, P.

    2016-12-01

    Nigeria, the largest producer of crude oil in Africa occupies sixth position in the world. Despite such huge oil revenue potentials, its pipeline network system is consistently susceptible to leaks causing oil spills. We investigate ground based spill events which are caused by operational error, equipment failure and most importantly by deliberate attacks along the major pipeline transport system. Sometimes, these spills are accompanied with fire explosion caused by accidental discharge, natural or illegal refineries in the creeds, etc. MODIS satellites fires data corresponding to the times and spill events (i.e. ground based data) of the Area of Interest (AOI) show significant correlation. The open source Quantum Geographical Information System (QGIS) was used to validate the dataset and the spatiotemporal analyses of the oil spill fires were expressed. We demonstrate that through QGIS and Google Earth (using the time sliders), we can identify and monitor oil spills when they are attended with fire events along the pipeline transport system accordingly. This is shown through the spatiotemporal images of the fires. Evidence of such fire cases resulting from bunt vegetation as different from industrial and domestic fire is also presented. Detecting oil spill fires in the study location may not require an enormous terabyte of image processing: we can however rely on a near-real-time (NRT) MODIS data that is readily available twice daily to detect oil spill fire as early warning signal for those hotspots areas where cases of oil seepage is significant in Nigeria.

  16. When oil spills emulsify

    International Nuclear Information System (INIS)

    Bobra, M.; Fingas, M.; Tennyson, E.

    1992-01-01

    Cleanup operations of oil spills must take into account the numerous detrimental effects attributable to the emulsification of spilled oil into a stable water-in-oil mousse. The incorporation of water greatly increases the volume of the polluted material. The viscous nature of mousse impedes the efficient operation of most mechanical recovery equipment and results in a cohesive slick that resists dispersion, both natural and artificial. The rate at which spilled oil emulsifies determines the effective window of opportunity for specific countermeasures. Much has been learned from previous studies on petroleum emulsification, but is still remain a poorly understood phenomenon. Although most crude oils can be emulsified, not all spills result in the formation of stable mousse. The formation of mousse results from a complex series of processes. Whether an oil will form mousse or not, and if so, at what rate, depends on an array of different factors including the properties of the oil and the prevailing environmental conditions. We need a greater understanding of the emulsification process to better predict the emulsification behavior of oil spills and utilize the most appropriate countermeasures available. In this paper, the authors report on work to elucidate the role that physicochemical factors play in determining an oil's tendency to emulsify. The authors studied the emulsification behavior of oils of known composition to examine the importance of oil chemistry in the emulsification process

  17. Oil shale commercialization study

    Energy Technology Data Exchange (ETDEWEB)

    Warner, M.M.

    1981-09-01

    Ninety four possible oil shale sections in southern Idaho were located and chemically analyzed. Sixty-two of these shales show good promise of possible oil and probable gas potential. Sixty of the potential oil and gas shales represent the Succor Creek Formation of Miocene age in southwestern Idaho. Two of the shales represent Cretaceous formations in eastern Idaho, which should be further investigated to determine their realistic value and areal extent. Samples of the older Mesozonic and paleozoic sections show promise but have not been chemically analyzed and will need greater attention to determine their potential. Geothermal resources are of high potential in Idaho and are important to oil shale prospects. Geothermal conditions raise the geothermal gradient and act as maturing agents to oil shale. They also might be used in the retorting and refining processes. Oil shales at the surface, which appear to have good oil or gas potential should have much higher potential at depth where the geothermal gradient is high. Samples from deep petroleum exploration wells indicate that the succor Creek shales have undergone considerable maturation with depth of burial and should produce gas and possibly oil. Most of Idaho's shales that have been analyzed have a greater potential for gas than for oil but some oil potential is indicated. The Miocene shales of the Succor Creek Formation should be considered as gas and possibly oil source material for the future when technology has been perfectes. 11 refs.

  18. The oil barrel price

    International Nuclear Information System (INIS)

    Blondy, J.; Papon, P.

    2009-01-01

    This paper proposes an overview and a prospective glance on the oil barrel price. It indicates the relevant indicators: Brent quotation, euro/dollar parity, economic activity indicators, world oil consumption distribution, crude oil production, refining capacity. It briefly presents the involved stake holders: crude oil producers, oil refiners, refined product dealers, and the OPEC. It discusses the major retrospective trends: evolution in relationship with geopolitical events and energy policies, strong correlation between oil demand and economic growth, prevalence of OPEC, growing importance of national oil companies. An emerging trend is noticed: growing role of emerging countries on the crude market. Some prospective issues are discussed: duration and intensity of economic recession, separation between economic growth and energy consumption, pace and ambition level of policies of struggle against climate change, exploitable resources, and geopolitical hazards. Four evolution hypotheses are discussed

  19. Oils, paintings and chemistry

    Directory of Open Access Journals (Sweden)

    Maria Eduarda Machado de Araújo

    2005-01-01

    Full Text Available In oil paintings artists use oils to apply pigments. These oils firstly are liquid and then solidify in a thin film. Many chemical reactions are involved in drying and also in the aging of these oils. Drying is a continuous process that begins with the oxidation of insaturated fatty acids from triglycerides to originate peroxides. These compounds suffer a cascade of reactions that lead to cross linking bonds between fatty acids residues, transforming the oil in a solid film. Identification of the film oil is possible using the palmitic/stearic ratio (P/S by chromatographic (GC and/or spectroscopic techniques. Sterol composition, phytosterols or cholesterol, determined by GC-MS or FTIR techniques, allows investigators to distinguish between oil painting and a temper one that used egg as the binding medium.

  20. Electricity/oil substitution

    International Nuclear Information System (INIS)

    Melvin, J.G.

    1980-09-01

    The extent to which electricity could substitute for imported oil in Canada is assessed and it is concluded that the bulk of projected oil imports could be displaced. This substitution of electricity for oil could be largely completed within two decades, with existing technology, using Canadian resources. The substitution of electricity for imported oil would result in relatively low energy costs and would stimulate economic growth. Energy self-sufficiency through the substitution of electricity for oil is uniquely a Canadian option; it is not open to other industrial countries. The option exists because of Canada's resources of oil sands for essential liquid fuels, hydraulic and nuclear electrical potential, and natural gas as an interim source of energy. While other countries face an energy crisis due to declining supplies of oil, Canada faces opportunities. The policies of Federal and Provincial governments, as perceived by individual decision makers, will have a major influence on Canada's ability to realize opportunities. (auth)