WorldWideScience

Sample records for hub spring reduces

  1. Scrubbing the hub of intravenous catheters with an alcohol wipe for 15 sec reduced neonatal sepsis.

    Science.gov (United States)

    Björkman, Louise; Ohlin, Andreas

    2015-03-01

    The aim of this study was to investigate whether scrubbing the hub of intravenous catheters with an alcohol wipe for 15 sec could reduce the incidence of neonatal sepsis in a level-three neonatal intensive care unit. We studied the incidence of neonatal sepsis caused by coagulase-negative staphylococci (CoNS) for 16.5 months before the initiative was launched on May 15, 2012 and then for a further 8.5 months after it was introduced. The hub routine was applied to all intravenous catheters. During the control period before the initiative was launched, there were nine cases of CoNS sepsis compared with no cases after it was introduced, resulting in a decrease in sepsis incidence from 1.5% to 0% with a risk reduction of 1.5% (0.53-2.58%) (p = 0.06). In the preterm infant population, the incidence of sepsis decreased from 3.6% to 0% (1.1-6.0%) (p = 0.11). Scrubbing the hub of intravenous catheters with an alcohol wipe for 15 sec seemed to be an efficient way of preventing sepsis caused by CoNS in newborn infants. However, the evidence for the benefits will remain weak until a large randomised trial has been completed. ©2014 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

  2. Warm Spring Reduced Impact of Summer Drought on Carbon Cycling

    Science.gov (United States)

    Wolf, Sebastian; Keenan, Trevor F.; Fisher, Joshua B.; Baldocchi, Dennis

    2015-04-01

    Drought severely impacts biosphere-atmosphere carbon and water fluxes of terrestrial ecosystems by reducing productivity, carbon uptake and water transport to the atmosphere. The 2012 US drought was among the most intense and widespread drought events in the U.S. since the 'Dust Bowl' period in the 1930s, and had devastating effects on agricultural production. In addition, 2012 was among the warmest years on record. Using eddy covariance measurements of carbon, water and energy exchange from AmeriFlux sites along with remote sensing products, we show that this summer drought substantially reduced ecosystem productivity, net carbon uptake and water transport to the atmosphere. However, the warm spring with higher ecosystem productivity reduced the impact of the summer drought on annual carbon uptake. Shifts in vegetation activity during spring also triggered feedbacks that contributed to the summer heatwave. Although the drought was exceptional, 2012 was an example of what is expected in terms of future climate change - i.e. warmer temperatures all year and an increased frequency and duration of drought in summer. Understanding the response of ecosystem carbon and water cycling to drought will help to mitigate these changes, and our study provides important new insights for that.

  3. Innovation hubs

    DEFF Research Database (Denmark)

    O´Hara, J.; Hansen, Poul H. Kyvsgård; Turner, N.

    2008-01-01

    "Whilst ‘incremental innovation' is an imperative for the short-to-medium term success of a company, there is also a need for companies to engage in innovation activity that goes beyond the incremental in order to guarantee long-term success. However, such ‘radical innovation' (RI) poses new...... challenges and requires new competencies, some of which may conflict with existing best-practices for incremental innovations. ‘Innovation hubs' are a type of organisational structure dedicated to RI projects that have been used by companies to manage these conflicts by maintaining a certain degree...... of separation from the culture and routines of the mainstream organisation. Unfortunately, it would appear that many attempts to set-up innovation hubs have ended in failure within a few years; not before considerable time, effort and resource has been expended. This paper reports on a study of six innovation...

  4. Innovation hubs

    DEFF Research Database (Denmark)

    O´Hara, J.; Hansen, Poul H. Kyvsgård; Turner, N.

    2008-01-01

    "Whilst ‘incremental innovation' is an imperative for the short-to-medium term success of a company, there is also a need for companies to engage in innovation activity that goes beyond the incremental in order to guarantee long-term success. However, such ‘radical innovation' (RI) poses new...... challenges and requires new competencies, some of which may conflict with existing best-practices for incremental innovations. ‘Innovation hubs' are a type of organisational structure dedicated to RI projects that have been used by companies to manage these conflicts by maintaining a certain degree...... of separation from the culture and routines of the mainstream organisation. Unfortunately, it would appear that many attempts to set-up innovation hubs have ended in failure within a few years; not before considerable time, effort and resource has been expended. This paper reports on a study of six innovation...

  5. Earlier vegetation green-up has reduced spring dust storms.

    Science.gov (United States)

    Fan, Bihang; Guo, Li; Li, Ning; Chen, Jin; Lin, Henry; Zhang, Xiaoyang; Shen, Miaogen; Rao, Yuhan; Wang, Cong; Ma, Lei

    2014-01-01

    The observed decline of spring dust storms in Northeast Asia since the 1950s has been attributed to surface wind stilling. However, spring vegetation growth could also restrain dust storms through accumulating aboveground biomass and increasing surface roughness. To investigate the impacts of vegetation spring growth on dust storms, we examine the relationships between recorded spring dust storm outbreaks and satellite-derived vegetation green-up date in Inner Mongolia, Northern China from 1982 to 2008. We find a significant dampening effect of advanced vegetation growth on spring dust storms (r = 0.49, p = 0.01), with a one-day earlier green-up date corresponding to a decrease in annual spring dust storm outbreaks by 3%. Moreover, the higher correlation (r = 0.55, p green-up date and dust storm outbreak ratio (the ratio of dust storm outbreaks to times of strong wind events) indicates that such effect is independent of changes in surface wind. Spatially, a negative correlation is detected between areas with advanced green-up dates and regional annual spring dust storms (r = -0.49, p = 0.01). This new insight is valuable for understanding dust storms dynamics under the changing climate. Our findings suggest that dust storms in Inner Mongolia will be further mitigated by the projected earlier vegetation green-up in the warming world.

  6. Springs

    Institute of Scientific and Technical Information of China (English)

    James J. Kilpatrick

    2006-01-01

    @@ Springs are not always the same. In some years, April bursts upon our Virginia hills in one prodigious leap-and all the stage is filled at once, whole choruses of tulips, arabesques of forsythia, cadenzas of flowering plum. The trees grow leaves overnight

  7. Natural Gas Market Hubs

    Data.gov (United States)

    Department of Homeland Security — A hub is a physical transfer point for natural gas where several pipelines are connected. A market center is a hub where the operator offers services that facilitate...

  8. Quadratic Assignment of Hubs in p-Hub Median Problem

    DEFF Research Database (Denmark)

    Gelareh, Shahin

    We introduce Generalized p-Hub Median Problem (GpHMP) that seeks to locate p hub nodes and install p distinct hub facilities/operators on the hubs while discount factor resulted by consolidation of flow on the hub links depends on the facilities/operators that are installed/operating on both hub...... nodes end-point. In contrast, in traditional hub location problems it is commonly assumed that all the hub facilities share a similar characteristic and economy of scale resulted by consolidation of flow over hub edges is not directly relevant to the hub facilities being installed at both end...

  9. Virtual Campus Hub technology

    DEFF Research Database (Denmark)

    Vercoulen, Frank; Badger, Merete; Monaco, Lucio;

    This deliverable briefly describes which technological components have been delivered for the Virtual Campus Hub and how they can be used. A detailed discussion of the technical details of the components, how they were realized and how they fit the VCH concept can be found in deliverables D5.......4. Virtual Campus Hub Technology Evaluation Report and D6.7 The Virtual Campus Hub Concept....

  10. The SPRING Nanoenergetics Hub at UTD

    Science.gov (United States)

    2008-12-01

    essential for improving the efficiency of the net charge transfer in photocatalysis and solar cells.2 A variety of methods has been employed for this...TDT nanofibers displayed faster photocatalysis reaction rates as compared to pure TiC>2 nanofibers and Degussa P25, which indicated that the Sn

  11. Responses of spring phenology to climate warming reduced over the past decades

    Science.gov (United States)

    Fu, Yongshuo. H.; Zhao, hongfang; piao, Shilong; Peaucelle, Marc; Peng, Shushi; Zhou, Guiyun; Ciais, Philippe; Huang, Mengtian; Menzel, Annette; Penuelas, Josep; Song, Yang; Vitasse, Yann; Zeng, Zhenzhong; Janssens, Ivan. A.

    2016-04-01

    The phenology of spring leaf unfolding is one of the key indicators of the climate change on ecosystems, and influences regional and hemispheric-scale carbon balances and plant-animal interactions. Changes in the phenology of spring leaf unfolding can also exert biophysical feedbacks on climate by modifying the surface albedo and energy budget. Recent studies have reported significant advances in spring phenology as a result of warming in most northern hemisphere regions. Climate warming is projected to further increase, but the future evolution of the phenology of spring leaf unfolding remains uncertain - in view of the imperfect understanding of how the underlying mechanisms respond to environmental stimuli. In addition, the relative contributions of each environmental stimulus, which together define the apparent temperature sensitivity of the phenology of spring leaf unfolding (advances in days per degree Celsius warming, ST), may also change over time. An improved characterization of the variation in phenological responses to spring temperature is thus valuable, provided that it addresses temporal and spatial scales relevant for regional projections. Using long-term in situ observations of leaf unfolding for seven dominant European tree species at 1,245 sites, we show here that the apparent response of leaf unfolding to climate warming (ST, expressed in days advance per ° C) has significantly decreased from 1980 to 2013 in all monitored tree species. Averaged across all species and sites, ST decreased by 40% from 4.0 ± 1.8 days ° C-1 during 1980-1994 to 2.3 ± 1.6 days ° C-1 during 1999-2013. The declining ST was also simulated by chilling-based phenology models, albeit with a weaker decline (24%-30%) than observed in situ. The reduction in ST is likely to be partly attributable to reduced chilling. Nonetheless, other mechanisms may also play a role, such as 'photoperiod limitation' mechanisms that may become ultimately limiting when leaf unfolding dates

  12. Aircraft Propeller Hub Repair

    Energy Technology Data Exchange (ETDEWEB)

    Muth, Thomas R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Peter, William H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-02-13

    The team performed a literature review, conducted residual stress measurements, performed failure analysis, and demonstrated a solid state additive manufacturing repair technique on samples removed from a scrapped propeller hub. The team evaluated multiple options for hub repair that included existing metal buildup technologies that the Federal Aviation Administration (FAA) has already embraced, such as cold spray, high velocity oxy-fuel deposition (HVOF), and plasma spray. In addition the team helped Piedmont Propulsion Systems, LLC (PPS) evaluate three potential solutions that could be deployed at different stages in the life cycle of aluminum alloy hubs, in addition to the conventional spray coating method for repair. For new hubs, a machining practice to prevent fretting with the steel drive shaft was recommended. For hubs that were refurbished with some material remaining above the minimal material condition (MMC), a silver interface applied by an electromagnetic pulse additive manufacturing method was recommended. For hubs that were at or below the MMC, a solid state additive manufacturing technique using ultrasonic welding (UW) of thin layers of 7075 aluminum to the hub interface was recommended. A cladding demonstration using the UW technique achieved mechanical bonding of the layers showing promise as a viable repair method.

  13. Coil Springs Layer Used to Support a Car Vertical Dynamics Simulator and to Reduce the Maximum Actuation Force

    Directory of Open Access Journals (Sweden)

    Dan N. Dumitriu

    2015-09-01

    Full Text Available A Danaher Thomson linear actuator with ball screw drive and a realtime control system are used here to induce vertical displacements under the driver/user seat of an in-house dynamic car simulator. In order to better support the car simulator and to dynamically protect the actuator’s ball screw drive, a layer of coil springs is used to support the whole simulator chassis. More precisely, one coil spring is placed vertically under each corner of the rectangular chassis. The paper presents the choice of the appropriate coil springs, so that to minimize as much as possible the ball screw drive task of generating linear motions, corresponding to the vertical displacements and accelerations encountered by a driver during a real ride. For this application, coil springs with lower spring constant are more suited to reduce the forces in the ball screw drive and thus to increase the ball screw drive life expectancy.

  14. Preliminary Analysis of Effects of Reduced Discharge onThermal Habitat of Pedersen Warm Springs Channel

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — A preliminary report to study the potential impacts of possible flow reductions in thermal spring systems located in the Warm Springs area of Moapa Valley NWR on the...

  15. Twin Hub Network (poster)

    NARCIS (Netherlands)

    Kreutzberger, E.D.; Konings, J.W.

    2014-01-01

    Twin hub network, a European Interreg IVB project, aims at making intermodal rail transport within, to and from North West Europe more competitive, in particular between seaports and inland terminals. Improving rail competitiveness enables to shift freight flows from road to rail, providing a more s

  16. Transport hub flow modelling

    OpenAIRE

    Despagne, Wilfried; Frenod, Emmanuel

    2014-01-01

    Purpose: The purpose of this paper is to investigate the road freight haulage activity. Using the physical and data flow information from a freight forwarder, we intend to model the flow of inbound and outbound goods in a freight transport hub. Approach: This paper presents the operation of a road haulage group. To deliver goods within two days to any location in France, a haulage contractor needs to be part of a network. This network handles the processing of both physical goods and data. We...

  17. GitHub Android

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    代码托管仓库GitHub发布了官方,Android客户端,手机和平板用户可以从GoogleP1ay下载。它的出现,将方便更多用户融入GitHub社区。GitHubAndroid本身也是开源软件,其源代码可以从GitHub浏览。此前,GitHub已经推出了Windows和Mac版客户端。

  18. PORTS WRESTLE FOR HUB STATUS

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    Due to the fact that there has been nocontainer transport hub port in NorthernChina,northern ports are striving fordevelopment and trying to secure a positionof being the hub port in Northern Chinaahead of others. According to media reports,EasternChina’s Shandong Province will invest 5billion yuan(US$604 million)in buildinga Qingdao international shipping hub thatisbased on existing ports in theShandong Peninsula.

  19. Indico: A Collaboration Hub

    CERN Document Server

    Ferreira, P; Bossy, C; Gonzalez, J B; Pugh, M; Resco, A; Trzaskoma, J; Wachter, C

    2012-01-01

    Since 2009, the development of Indico has focused on usability, performance and new features, especially the ones related to meeting collaboration. Usability studies have resulted in the biggest change Indico has experienced up to now, a new web layout that makes user experience better. Performance improvements were also a key goal since 2010; the main features of Indico have been optimized remarkably. Along with usability and performance, new features have been added to Indico such as webchat integration, video services bookings, webcast and recording requests, designed to really reinforce Indico position as the main hub for all CERN collaboration services, and many others which aim is to complete the conference lifecycle management. Indico development is also moving towards a broader collaboration where other institutes, hosting their own Indico instance, can contribute to the project in order make it a better and more complete tool.

  20. Microenvironments of reduced salinity harbour biofilms in Dead Sea underwater springs

    NARCIS (Netherlands)

    Häusler, S.; Noriega-Ortega, B.E.; Polerecky, L.; Meyer, V.; de Beer, D.; Ionescu, D.

    2014-01-01

    The Dead Sea is a hypersaline lake where only few types of organisms can grow. Recently, abundant and diverse microbial life was discovered in biofilms covering rocks and permeable sediments around underwater freshwater springs and seeps. We used a newly developed salinity mini-sensor (spatial resol

  1. Spring Tire

    Science.gov (United States)

    Asnani, Vivake M.; Benzing, Jim; Kish, Jim C.

    2011-01-01

    The spring tire is made from helical springs, requires no air or rubber, and consumes nearly zero energy. The tire design provides greater traction in sandy and/or rocky soil, can operate in microgravity and under harsh conditions (vastly varying temperatures), and is non-pneumatic. Like any tire, the spring tire is approximately a toroidal-shaped object intended to be mounted on a transportation wheel. Its basic function is also similar to a traditional tire, in that the spring tire contours to the surface on which it is driven to facilitate traction, and to reduce the transmission of vibration to the vehicle. The essential difference between other tires and the spring tire is the use of helical springs to support and/or distribute load. They are coiled wires that deform elastically under load with little energy loss.

  2. The Virtual Campus Hub Concept

    DEFF Research Database (Denmark)

    Badger, Merete; Prag, Sidsel-Marie Winther; Monaco, Lucio

    of Technology in Sweden, Politecnico di Torino in Italy, and Eindhoven University of Technology in the Netherlands. The project is partially funded by the European Commission under the 7th Framework Programme (project no. RI-283746). This report describes the final concept of Virtual Campus Hub. It gives...... an overview of the project achievements and recommends best practices for the use of the Virtual Campus Hub elements: a series of applications for online teaching and collaboration which are connected to a technical platform, the Virtual Campus Hub portal, using the European research infrastructure Géant/eduGAIN....

  3. Microenvironments of reduced salinity harbour biofilms in Dead Sea underwater springs.

    Science.gov (United States)

    Häusler, Stefan; Noriega-Ortega, Beatriz E; Polerecky, Lubos; Meyer, Volker; de Beer, Dirk; Ionescu, Danny

    2014-04-01

    The Dead Sea is a hypersaline lake where only few types of organisms can grow. Recently, abundant and diverse microbial life was discovered in biofilms covering rocks and permeable sediments around underwater freshwater springs and seeps. We used a newly developed salinity mini-sensor (spatial resolution 300 μm) to investigate the salinity environment around these biofilms in a flume that simulates an underwater spring. Compared with the hypersaline bulk water, salinity at the sediment surface decreased to zero at seeping velocities of 7 cm s(-1). At similar flow velocities, salinity above rocks decreased to 100-200 g L(-1) at a distance of 300 μm from the surface. This depended on the position on the rock, and coincided with locations of natural biofilms. The salinity reduction substantially diminished at flow velocities of 3.5 cm s(-1). We suggest that locally decreased salinity due to freshwater input is one of the main factors that make areas around underwater freshwater springs and seeps in the Dead Sea more favourable for life. However, due to frequent fluctuations in the freshwater flow, the locally decreased salinity is unstable. Therefore, microorganisms that inhabit these environments must be capable of withstanding large and rapid salinity fluctuations.

  4. A Flexible Logistics Distribution Hub Model considering Cost Weighted Time

    Directory of Open Access Journals (Sweden)

    Wenxue Ran

    2017-01-01

    Full Text Available The delivery time of order has become an important fact for customers to evaluate logistics services. Due to the diverse and large quantities of orders in the background of electronic commerce, how to improve the flexibility of distribution hub and reduce the waiting time of customers becomes one of the most challenging questions for logistics companies. With this in mind, this paper proposes a new method of flexibility assessment in distribution hub by introducing cost weighted time (CWT. The advantages of supply hub operation mode in delivery flexibility are verified by the approach: the mode has pooling effects and uniform distribution characteristics; these traits can reduce overlapping delivery time to improve the flexibility in the case of two suppliers. Numerical examples show that the supply hub operation mode is more flexible than decentralized distribution operation mode in multidelivery cycles.

  5. A new transport hub

    CERN Multimedia

    Corinne Pralavorio

    2016-01-01

    CERN’s new Mobility Centre, allowing you to switch easily from one mode of transport to another, has just been officially opened.   Inauguration of the CERN Mobility Centre by Martin Steinacher, Director for Finance and Human Resources, and Lluis Miralles, Head of the SMB department. CERN’s new Mobility Centre, on the car park next to the Globe of Science and Innovation was officially opened on Tuesday, 22 March. The centre brings together all of CERN’s transport options in a single location. "Our aim is to create an intermodal hub where CERN users and personnel can switch from one mode of transport to another, and from CERN transport to public transport," explains Lluis Miralles, head of the Site Management and Buildings (SMB) department. The Mobility Centre incorporates the CERN bike and car rental services, the self-service car- and bike-sharing schemes, and SIXT car rental facilities (for long-distance journeys). It is located right ne...

  6. Directly acting spring loaded safety valves as shock reducing measure; Direkt wirkende, federbelastete Sicherheitsventile als Druckstossreduzierende Massnahme

    Energy Technology Data Exchange (ETDEWEB)

    Ismaier, A.; Schluecker, E. [Erlangen-Nuernberg Univ. (DE). Lehrstuhl fuer Prozessmaschinen und Anlagentechnik (IPAT)

    2010-05-15

    Hydraulic shocks as induced by fast closure of armatures or by sudden pump failures are massive impacts in piping systems and require extensive measures to absorb the generated load. Basically the avoidance of water hammers are preferable but in case of emergency shutdowns unavoidable hydraulic shocks have to be reduced by appropriate measures. The authors describe experiments with spring loaded safety valves as shock reducing measures. It was shown that the vale dimensions is essential for the efficacy. A realistic modeling is possible using the one-dimensional fluid mechanics code ROLAST.

  7. H.U.B city steps: methods and early findings from a community-based participatory research trial to reduce blood pressure among african americans

    Directory of Open Access Journals (Sweden)

    Molaison Elaine

    2011-06-01

    Full Text Available Abstract Background Community-based participatory research (CBPR has been recognized as an important approach to develop and execute health interventions among marginalized populations, and a key strategy to translate research into practice to help reduce health disparities. Despite growing interest in the CBPR approach, CBPR initiatives rarely use experimental or other rigorous research designs to evaluate health outcomes. This behavioral study describes the conceptual frameworks, methods, and early findings related to the reach, adoption, implementation, and effectiveness on primary blood pressure outcomes. Methods The CBPR, social support, and motivational interviewing frameworks are applied to test treatment effects of a two-phased CBPR walking intervention, including a 6-month active intervention quasi experimental phase and 12-month maintenance randomized controlled trial phase to test dose effects of motivational interviewing. A community advisory board helped develop and execute the culturally-appropriate intervention components which included social support walking groups led by peer coaches, pedometer diary self-monitoring, monthly diet and physical activity education sessions, and individualized motivational interviewing sessions. Although the study is on-going, three month data is available and reported. Analyses include descriptive statistics and paired t tests. Results Of 269 enrolled participants, most were African American (94% females (85% with a mean age of 43.8 (SD = 12.1 years. Across the 3 months, 90% of all possible pedometer diaries were submitted. Attendance at the monthly education sessions was approximately 33%. At the 3-month follow-up 227 (84% participants were retained. From baseline to 3-months, systolic BP [126.0 (SD = 19.1 to 120.3 (SD = 17.9 mmHg; p Conclusions This CBPR study highlights implementation factors and signifies the community's active participation in the development and execution of this study. Reach

  8. Estimating the sustainability of hubs

    NARCIS (Netherlands)

    Lieshout, R.; Zuidberg, J.; Veldhuis, J.

    2008-01-01

    Several airports in the world are or will be confronted with capacity problems in the near future. As a result of this congestion, many airports will face a selectivity problem: which traffic segments must be accommodated and which segments are less crucial? At hub airports there is generally one

  9. Beijing: Next International Financial Hub?

    Institute of Scientific and Technical Information of China (English)

    Li Zhen

    2008-01-01

    @@ Beijing's new financial dream On May 5,the Beijing Municipal Government released a notice regarding its plans to spur the financial industry,vowing to put forth a strong effort to become the national financial decision-making center,financial management center and financial information and services center,and formally announcing its ambitious aspiration to become a financial hub with international influence.

  10. Solving Hub Network Problem Using Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Mursyid Hasan Basri

    2012-01-01

    Full Text Available This paper addresses a network problem that described as follows. There are n ports that interact, and p of those will be designated as hubs. All hubs are fully interconnected. Each spoke will be allocated to only one of available hubs. Direct connection between two spokes is allowed only if they are allocated to the same hub. The latter is a distinct characteristic that differs it from pure hub-and-spoke system. In case of pure hub-and-spoke system, direct connection between two spokes is not allowed. The problem is where to locate hub ports and to which hub a spoke should be allocated so that total transportation cost is minimum. In the first model, there are some additional aspects are taken into consideration in order to achieve a better representation of the problem. The first, weekly service should be accomplished. Secondly, various vessel types should be considered. The last, a concept of inter-hub discount factor is introduced. Regarding the last aspect, it represents cost reduction factor at hub ports due to economies of scale. In practice, it is common that the cost rate for inter-hub movement is less than the cost rate for movement between hub and origin/destination. In this first model, inter-hub discount factor is assumed independent with amount of flows on inter-hub links (denoted as flow-independent discount policy. The results indicated that the patterns of enlargement of container ship size, to some degree, are similar with those in Kurokawa study. However, with regard to hub locations, the results have not represented the real practice. In the proposed model, unsatisfactory result on hub locations is addressed. One aspect that could possibly be improved to find better hub locations is inter-hub discount factor. Then inter-hub discount factor is assumed to depend on amount of inter-hub flows (denoted as flow-dependent discount policy. There are two discount functions examined in this paper. Both functions are characterized by

  11. Solving Hub Network Problem Using Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Mursyid Hasan Basri

    2012-01-01

    Full Text Available This paper addresses a network problem that described as follows. There are n ports that interact, and p of those will be designated as hubs. All hubs are fully interconnected. Each spoke will be allocated to only one of available hubs. Direct connection between two spokes is allowed only if they are allocated to the same hub. The latter is a distinct characteristic that differs it from pure hub-and-spoke system. In case of pure hub-and-spoke system, direct connection between two spokes is not allowed. The problem is where to locate hub ports and to which hub a spoke should be allocated so that total transportation cost is minimum. In the first model, there are some additional aspects are taken into consideration in order to achieve a better representation of the problem. The first, weekly service should be accomplished. Secondly, various vessel types should be considered. The last, a concept of inter-hub discount factor is introduced. Regarding the last aspect, it represents cost reduction factor at hub ports due to economies of scale. In practice, it is common that the cost rate for inter-hub movement is less than the cost rate for movement between hub and origin/destination. In this first model, inter-hub discount factor is assumed independent with amount of flows on inter-hub links (denoted as flow-independent discount policy. The results indicated that the patterns of enlargement of container ship size, to some degree, are similar with those in Kurokawa study. However, with regard to hub locations, the results have not represented the real practice. In the proposed model, unsatisfactory result on hub locations is addressed. One aspect that could possibly be improved to find better hub locations is inter-hub discount factor. Then inter-hub discount factor is assumed to depend on amount of inter-hub flows (denoted as flow-dependent discount policy. There are two discount functions examined in this paper. Both functions are characterized by

  12. Improving farming practices reduces the carbon footprint of spring wheat production.

    Science.gov (United States)

    Gan, Yantai; Liang, Chang; Chai, Qiang; Lemke, Reynald L; Campbell, Con A; Zentner, Robert P

    2014-11-18

    Wheat is one of the world's most favoured food sources, reaching millions of people on a daily basis. However, its production has climatic consequences. Fuel, inorganic fertilizers and pesticides used in wheat production emit greenhouse gases that can contribute negatively to climate change. It is unknown whether adopting alternative farming practices will increase crop yield while reducing carbon emissions. Here we quantify the carbon footprint of alternative wheat production systems suited to semiarid environments. We find that integrating improved farming practices (that is, fertilizing crops based on soil tests, reducing summerfallow frequencies and rotating cereals with grain legumes) lowers wheat carbon footprint effectively, averaging -256 kg CO2 eq ha(-1) per year. For each kg of wheat grain produced, a net 0.027-0.377 kg CO2 eq is sequestered into the soil. With the suite of improved farming practices, wheat takes up more CO2 from the atmosphere than is actually emitted during its production.

  13. Subsea gas transition hubs

    OpenAIRE

    Jakobsen, Pål Morten

    2014-01-01

    Gassco is the operator of two platforms with gas transport functions. These platforms are getting old and require large modifications to extend the lifetime and maintain their functions. Rapid development in subsea technology the recent years enables functions that earlier where performed by offshore platforms to be converted into subsea systems. Subsea developments offer the potential of reduced CAPEX, OPEX and risk reduction in terms of HSE. This makes subsea developments an attractive alte...

  14. PolarHub: A Global Hub for Polar Data Discovery

    Science.gov (United States)

    Li, W.

    2014-12-01

    This paper reports the outcome of a NSF project in developing a large-scale web crawler PolarHub to discover automatically the distributed polar dataset in the format of OGC web services (OWS) in the cyberspace. PolarHub is a machine robot; its goal is to visit as many webpages as possible to find those containing information about polar OWS, extract this information and store it into the backend data repository. This is a very challenging task given huge data volume of webpages on the Web. Three unique features was introduced in PolarHub to make it distinctive from earlier crawler solutions: (1) a multi-task, multi-user, multi-thread support to the crawling tasks; (2) an extensive use of thread pool and Data Access Object (DAO) design patterns to separate persistent data storage and business logic to achieve high extendibility of the crawler tool; (3) a pattern-matching based customizable crawling algorithm to support discovery of multi-type geospatial web services; and (4) a universal and portable client-server communication mechanism combining a server-push and client pull strategies for enhanced asynchronous processing. A series of experiments were conducted to identify the impact of crawling parameters to the overall system performance. The geographical distribution pattern of all PolarHub identified services is also demonstrated. We expect this work to make a major contribution to the field of geospatial information retrieval and geospatial interoperability, to bridge the gap between data provider and data consumer, and to accelerate polar science by enhancing the accessibility and reusability of adequate polar data.

  15. Carboxydothermus pertinax sp. nov., a thermophilic, hydrogenogenic, Fe(III)-reducing, sulfur-reducing carboxydotrophic bacterium from an acidic hot spring

    DEFF Research Database (Denmark)

    Yoneda, Yasuko; Yoshida, Takashi; Kawaichi, Satoshi;

    2012-01-01

    growth on CO, H(2) and CO(2) were produced. Growth occurred on molecular hydrogen as an energy source and carbon dioxide as a sole carbon source. Growth was observed on various organic compounds under an N(2) atmosphere with the reduction of ferric iron. The temperature range for carboxydotrophic growth......A novel anaerobic, Fe(III)-reducing, hydrogenogenic, carboxydotrophic bacterium, designated strain Ug1(T), was isolated from a volcanic acidic hot spring in southern Kyushu Island, Japan. Cells of the isolate were rod-shaped (1.0-3.0 µm long) and motile due to peritrichous flagella. Strain Ug1(T...... oxidation. On the basis of phylogenetic analysis and unique physiological features, the isolate represents a novel species of the genus Carboxydothermus for which the name Carboxydothermus pertinax sp. nov. is proposed; the type strain of the novel species is Ug1(T) (=DSM 23698(T)=NBRC 107576(T))....

  16. Biaxial wheel/hub test facility. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, G.; Grubisic, V. [eds.

    2000-07-01

    The 4{sup th} meeting aims to exchange the experience and knowledge of engineers during several presentations and discussions about new developments required for a reliable, time and cost reducing validation of the wheel/hub assembly. Tremendous development of the wheel performance, described by the ratio of the rated load (kg) versus the wheel weight (kg) had taken place during the last 5000 years. Starting from the ratio of 3 for wooden 2-piece-disc-wheels in Mesopotamia it needed nearly 1000 years to increase the ratio to approx 5 at light-weight spoke wheels for fighting carriages, found in the grave of king Tutenchamon in Egypt. Modern light alloy wheels of commercial vehicles reach values up to 160 kg/kg. Additionally the comlex design of the modern systems for cars and commercial vehicles comprising wheel, brake, hub, bearing, spindle and hub carrier, including different materials and their treatment, fasteners, press-fits, require an appropriate testing procedure. The variable loading conditions, caused by operational wheel forces, brake and torque moments including heating, may result in changing tolerances and press-fits during operation and consequently in different damage mechanisms. This can be simulated in the Biaxial Wheel Test Machine, whereby corresponding load programs are necessary. An overview about all biaxial test machines in usage at the end of 1999 is shown in the introduction. The total number is 17 for cars, 7 for commercial vehicles and 1 for trains. The six presentations of this meeting were consequently concentrated on: (a) recommendations for a standardization of load programs of the German Wheel Committee, (b) the simulation of brake and torque events and (c) the possibility for a numerical stress analyses and fatigue life assessment. (orig./AKF)

  17. Catch crops as universal and effective method for reducing nitrogen leaching loss in spring cereal production: A meta-analysis.

    Science.gov (United States)

    Valkama, Elena; Lemola, Riitta; Känkänen, Hannu; Turtola, Eila

    2016-04-01

    Sustainable farms produce adequate amounts of a high-quality product, protect their resources and are both environmentally friendly and economically profitable. Nitrogen (N) fertilization decisively influences the cereal yields as well as increases soil N balance (N input in fertilizer - N output in harvested yield), thereby leading to N losses to the environment. However, while N input reduction affects soil N balance, such approach would markedly reduce N leaching loss only in case of abnormally high N balances. As an alternative approach, the growing of catch crops aims to prevent nutrient leaching in autumn after harvest and during the following winter, but due to competition, catch crops may also reduce yields of the main crop. Although studies have explored the environmental effects of catch crops in cereal production in the Nordic countries (Denmark, Sweden, Finland and Norway) during the past 40 years, none has yet carried out a meta-analysis. We quantitatively summarized 35 studies on the effect of catch crops (non-legume and legume) undersown in spring cereals on N leaching loss or its risk as estimated by the content of soil nitrate N or its sum with ammonium in late autumn. The meta-analysis also included the grain yield and N content of spring cereals. To identify sources of variation, we studied the effects of soil texture and management (ploughing time, the amount of N applied, fertilizer type), as well as climatic (annual precipitation) and experimental conditions (duration of experiments, lysimeter vs. field experiments). Finally, we examined whether the results differed between the countries or over the decades. Compared to control groups with no catch crops, non-legume catch crops, mainly ryegrass species, reduced N leaching loss by 50% on average, and soil nitrate N or inorganic N by 35% in autumn. Italian ryegrass depleted soil N more effectively (by 60%) than did perennial ryegrass or Westerwolds ryegrass (by 25%). In contrast, legumes (white

  18. An Application of Deviance Regulation Theory to Reduce Alcohol-Related Problems Among College Women During Spring Break.

    Science.gov (United States)

    Dvorak, Robert D; Kramer, Matthew P; Stevenson, Brittany L; Sargent, Emily M; Kilwein, Tess M

    2017-02-20

    Spring break (SB) can lead to heavy episodic drinking and increased alcohol-related risks. This may be especially relevant for women. The current study utilized deviance regulation theory to increase the use of protective behavioral strategies (PBSs) among female college students on SB. Female college students going on SB (n = 62) completed a screening, a pre-SB intervention (where they were randomly assigned to receive either a positively or negatively framed message about individuals who do or do not use PBS), and a post-SB assessment that provided alcohol and PBS use data for each day of SB (n = 620 person-days). Data were analyzed using a multilevel structural equation model. In the negative frame, SB PBS use was higher among those who perceived SB PBS norms to be more common on SB relative to non-SB. In the positive frame, SB PBS use was higher among those who perceived SB PBS norms to be less common on SB relative to non-SB. These associations did not result in lower alcohol consumption, but did result in a lower likelihood of experiencing alcohol-related problems during SB. These results suggest that a brief online intervention, that utilizes targeted messages based on normative perceptions of SB PBS use, could be an effective strategy for reducing alcohol-related consequences among college student women during SB. (PsycINFO Database Record

  19. The once & future repository, HKU's Scholars Hub

    OpenAIRE

    Palmer, DT; Castro, P.; Bollini, A; Mennielli, M

    2015-01-01

    The HKU Scholars Hub (the Hub) began service as a traditional institutional repository of The University of Hong Kong (HKU). However this format was not compelling to HKU researchers. Fortunately a subsequent reformation of the HKU statement on university mission and vision infused new life and purpose into the project. Over the next five years, in partnership with the Italian University Consortium, Cineca, the HKU Libraries transformed the Hub from an IR to a Current Research Information ...

  20. On GitHub's Programming Languages

    OpenAIRE

    2016-01-01

    GitHub is the most widely used social, distributed version control system. It has around 10 million registered users and hosts over 16 million public repositories. Its user base is also very active as GitHub ranks in the top 100 Alexa most popular websites. In this study, we collect GitHub's state in its entirety. Doing so, allows us to study new aspects of the ecosystem. Although GitHub is the home to millions of users and repositories, the analysis of users' activity time-series reveals tha...

  1. On the Predictability of Hub Height Winds

    DEFF Research Database (Denmark)

    Draxl, Caroline

    Wind energy is a major source of power in over 70 countries across the world, and the worldwide share of wind energy in electricity consumption is growing. The introduction of signicant amounts of wind energy into power systems makes accurate wind forecasting a crucial element of modern electrical...... grids. These systems require forecasts with temporal scales of tens of minutes to a few days in advance at wind farm locations. Traditionally these forecasts predict the wind at turbine hub heights; this information is then converted by transmission system operators and energy companies into predictions...... of power output at wind farms. Since the power available in the wind is proportional to the wind speed cubed, even small wind forecast errors result in large power prediction errors. Accurate wind forecasts are worth billions of dollars annually; forecast improvements will result in reduced costs...

  2. Virtual Campus Hub technical evaluation report

    DEFF Research Database (Denmark)

    Vercoulen, Frank; Badger, Merete; Monaco, Lucio;

    This report describes and discusses the technical achievements of the Virtual Campus Hub project and formulates a brief agenda for the future.......This report describes and discusses the technical achievements of the Virtual Campus Hub project and formulates a brief agenda for the future....

  3. Logistics hubs: an integration of transport infrastructure

    CSIR Research Space (South Africa)

    Botha, M

    2008-07-01

    Full Text Available Logistics hubs are very well established internationally and many examples exist where these have been successfully built and implemented. This success have lead to the proliferation of such hubs and in South Africa there are many "decision makers...

  4. Hub discovery in partial correlation graphical models

    CERN Document Server

    Hero, Alfred

    2011-01-01

    This paper treats the problem of screening a p-variate sample for strongly and multiply connected vertices in the partial correlation graph associated with the the partial correlation matrix of the sample. This problem, called hub screening, is important in many applications ranging from network security to computational biology to finance to social networks. In the area of network security, a node that becomes a hub of high correlation with neighboring nodes might signal anomalous activity such as a coordinated flooding attack. In the area of computational biology the set of hubs of a gene expression correlation graph can serve as potential targets for drug treatment to block a pathway or modulate host response. In the area of finance a hub might indicate a vulnerable financial instrument or sector whose collapse might have major repercussions on the market. In the area of social networks a hub of observed interactions between criminal suspects could be an influential ringleader. The techniques and theory pr...

  5. Dynamic hubs show competitive and static hubs non-competitive regulation of their interaction partners.

    Directory of Open Access Journals (Sweden)

    Apurv Goel

    Full Text Available Date hub proteins have 1 or 2 interaction interfaces but many interaction partners. This raises the question of whether all partner proteins compete for the interaction interface of the hub or if the cell carefully regulates aspects of this process? Here, we have used real-time rendering of protein interaction networks to analyse the interactions of all the 1 or 2 interface hubs of Saccharomyces cerevisiae during the cell cycle. By integrating previously determined structural and gene expression data, and visually hiding the nodes (proteins and their edges (interactions during their troughs of expression, we predict when interactions of hubs and their partners are likely to exist. This revealed that 20 out of all 36 one- or two- interface hubs in the yeast interactome fell within two main groups. The first was dynamic hubs with static partners, which can be considered as 'competitive hubs'. Their interaction partners will compete for the interaction interface of the hub and the success of any interaction will be dictated by the kinetics of interaction (abundance and affinity and subcellular localisation. The second was static hubs with dynamic partners, which we term 'non-competitive hubs'. Regulatory mechanisms are finely tuned to lessen the presence and/or effects of competition between the interaction partners of the hub. It is possible that these regulatory processes may also be used by the cell for the regulation of other, non-cell cycle processes.

  6. The noise generated by a landing gear wheel with hub and rim cavities

    Science.gov (United States)

    Wang, Meng; Angland, David; Zhang, Xin

    2017-03-01

    Wheels are one of the major noise sources of landing gears. Accurate numerical predictions of wheel noise can provide an insight into the physical mechanism of landing gear noise generation and can aid in the design of noise control devices. The major noise sources of a 33% scaled isolated landing gear wheel are investigated by simulating three different wheel configurations using high-order numerical simulations to compute the flow field and the FW-H equation to obtain the far-field acoustic pressures. The baseline configuration is a wheel with a hub cavity and two rim cavities. Two additional simulations are performed; one with the hub cavity covered (NHC) and the other with both the hub cavity and rim cavities covered (NHCRC). These simulations isolate the effects of the hub cavity and rim cavities on the overall wheel noise. The surface flow patterns are visualised by shear stress lines and show that the flow separations and attachments on the side of the wheel, in both the baseline and the configuration with only the hub cavity covered, are significantly reduced by covering both the hub and rim cavities. A frequency-domain FW-H equation is used to identify the noise source regions on the surface of the wheel. The tyre is the main low frequency noise source and shows a lift dipole and side force dipole pattern depending on the frequency. The hub cavity is identified as the dominant middle frequency noise source and radiates in a frequency range centered around the first and second depth modes of the cylindrical hub cavity. The rim cavities are the main high-frequency noise sources. With the hub cavity and rim cavities covered, the largest reduction in Overall Sound Pressure Level (OASPL) is achieved in the hub side direction. In the other directivities, there is also a reduction in the radiated sound.

  7. Research dedusting efficiency of the inertial hub with adjustable parameters

    Directory of Open Access Journals (Sweden)

    Sharapov Rashid

    2016-01-01

    Full Text Available Production of construction materials every year production increases, thus increasing emissions pollutants into the atmosphere subjected to cleaning. At the enterprises of building materials production equipment becoming outdated both morally and physically exhausted their useful life. Technological design standards in the operation of purification equipment has undergone a number of changes. There are a large number of works devoted to the theory of cyclone separation. They examined calculation method and to determine the minimum size of particles is separated completely from the air stream in a cyclone. In theory, the high efficiency cyclones are relatively small separation of particles from the air stream. The experiments show that certain fractions of full capture occurs from the cyclones and out relatively large particles. Designed dust device hubs. They capture dust particles with low specific density and smaller than 5–10 microns. Rational use of hubs is achieved in the aspiration systems high performance. They are placed in front of or between the filter and the cyclone filter. Hub much reduces the amount of dust-laden air directed onto a thin cleaning. This reduces energy consumption for manufacturing as a whole, as well as, due to a possible decrease in performance fine filters, reducing their initial cost, metal consumption, maintenance costs and reduce the area occupied by them.

  8. Multiple Hub Network Choice in the Liberalized European Market

    Science.gov (United States)

    Berechman, Joseph; deWit, Jaap

    1997-01-01

    . In the meantime, open skies agreements have been concluded between the USA and most of the EU member states to facilitate strategic alliances between airlines of the states involved. As a result of this on-going liberalization the model of the single 'national' carrier using the national home base as its single hub for the designated third, fourth and sixth freedom operations will stepwise disappear. Within the EU the concept of the national carrier has already been replaced by that of the community carrier. State ownership in more and more European carriers is reduced. On the longer run mergers or even bankruptcy will further undermine the "single national carrier - single national hub" model in Europe. In the meantime, strategic alliances between national carriers in Europe will already reduce the airlines' loyalty to a single airport. Profit maximization and accountability to share holders will supersede the loyalty of these newly emerging alliances, probably looking for the opportunities of a multiple hub network to adequately cover the whole European market. As a consequence, some European airports might see a substantial decline in arriving, departing and transfer traffic, thus in revenues and financial solvency, as well as in their connection to other inter-continental and intra-European destinations. At the same time, other airports might realize a significant increase in traffic as they will be sought after by the profit maximizing airlines as their major gateway hubs. Which will be the losing airports and which will be the winning ones? Can airports anticipate the actions of airlines in deregulated markets and utilize policies which will improve their relative position? If so, what should be these anticipatory policies? These questions become the more urgent, since an increasing number of major European airports will be privatized in the near future. Although increasing airport congestion in Europe will also be reflected in a growing demand pressure for

  9. Spring Outing

    Institute of Scientific and Technical Information of China (English)

    孙芳

    2011-01-01

    It is springtime.The days are getting warmer and the flowers are in bloom.With the pleasantly warm sunshine,gentle breeze and fresh air,it is high time for spring outing and sightseeing.Are you still hesitating? Let’s see what benefits spring outing brings about and then pay attention to some matters while taking a trip out in spring. Benefits of spring outing Spring outing is especially popular with children and teenagers.But many adults also like to go on spring trips.The reason might be that spring outing can have several benefits.

  10. Fatigue based design and analysis of wheel hub for Student formula car by Simulation Approach

    Science.gov (United States)

    Gowtham, V.; Ranganathan, A. S.; Satish, S.; Alexis, S. John; Siva kumar, S.

    2016-09-01

    In the existing design of Wheel hub used for Student formula cars, the brake discs cannot be removed easily since the disc is mounted in between the knuckle and hub. In case of bend or any other damage to the disc, the replacement of the disc becomes difficult. Further using OEM hub and knuckle that are used for commercial vehicles will result in increase of unsprung mass, which should be avoided in Student formula cars for improving the performance. In this design the above mentioned difficulties have been overcome by redesigning the hub in such a way that the brake disc could be removed easily by just removing the wheel and the caliper and also it will have reduced weight when compared to existing OEM hub. A CAD Model was developed based on the required fatigue life cycles. The forces acting on the hub were calculated and linear static structural analysis was performed on the wheel hub for three different materials using ANSYS Finite Element code V 16.2. The theoretical fatigue strength was compared with the stress obtained from the structural analysis for each material.

  11. The effect of adjuvants and reduced rates of crop protection agents on weed infestation, health and lodging of spring barley (Hordeum sativum L.

    Directory of Open Access Journals (Sweden)

    Cezary A. Kwiatkowski

    2012-12-01

    Full Text Available A field experiment in the cultivation of spring barley was carried out in the period 2007-2009 at the Experimental Farm in Czesławice (central Lublin region on grey-brown podzolic soil derived from loess (soil quality class II. The study involved 3 rates of herbicides, growth retardant and fungicides (100%, 75%, 50% as well as different adjuvant types (oil, surface- active, mineral adjuvant. Plots without any adjuvant were the control treatment. Conventional tillage was used, while mineral fertilization was adjusted to high initial soil nutrient availability. A hypothesis was made that the reduction of pesticide rates by 25-50%, with the simultaneous addition of adjuvants, would allow health, weed infestation and lodging of spring barley to be maintained at a level similar to that obtained under the conditions when maximum rates are applied without any adjuvant. It was also assumed that particular adjuvants could show different interactions with the tested groups of crop protection agents. It was proved that the application of full recommended rates of pesticides gave the best values of the indicators relating to weed infestation, health and lodging of spring barley. However, thanks to the addition of adjuvants to the spray solution, the application of pesticide doses reduced by 25% produced similar results. A higher reduction of pesticide rates (by 50% had an adverse effect on the traits in question. In such case, there was noted higher weed infestation of the spring barley crop, compensation of some weed species, and increased stem-base infection by the fungal disease complex. On the other hand, less radical changes were observed in the case of spring barley lodging. The above-mentioned situation occurred in spite of the fact that the action of pesticides was aided by adjuvants. From the group of adjuvants under comparison, the oil adjuvant Atpolan 80 EC showed the best interaction with the crop protection agents under consideration.

  12. Innovation Hub How-To

    DEFF Research Database (Denmark)

    Berger, Andreas; Brem, Alexander

    2016-01-01

    Firms around the world are eager to replicate the successes of enterprises that have established innovation labs in California's Silicon Valley. An analysis of four leading US companies that have set up idea incubators in the Valley—Xerox, Apple, Google, and Cisco—point to eight factors for succe...... disruptive over incremental innovation, and being patient. Regardless of where an innovation hub is established, the key to success lies in hiring creative, intrinsically motivated staff and then giving them the freedom to do what they do best.......Firms around the world are eager to replicate the successes of enterprises that have established innovation labs in California's Silicon Valley. An analysis of four leading US companies that have set up idea incubators in the Valley—Xerox, Apple, Google, and Cisco—point to eight factors for success...... in establishing an innovative environment: carefully considering the decision to set up such a center, hiring the right people, designing a framework for effective output, creating a buffer from bureaucratic distractions, securing a leader to champion the effort, focusing on business outcomes, fostering...

  13. Zoning Districts - Volusia County HUB Zones

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Historically Underutilized Business (HUB) Zones in Volusia County. Go to http://www.sba.gov/hubzone or contact the Department of Economic Development (386) 248-8048...

  14. Motor coordination: a local hub for coordination.

    Science.gov (United States)

    Calabrese, Ronald L

    2014-03-31

    A local interneuron of a crayfish central pattern generator serves as a hub that integrates ascending and descending coordinating information and passes it on to a local oscillatory microcircuit to coordinate a series of segmental appendages known as swimmerets.

  15. Spring in the Arab Spring

    NARCIS (Netherlands)

    Borg, G.J.A.

    2011-01-01

    Column Gert Borg | Spring in the Arab Spring door dr. Gert Borg, onderzoeker bij Islam en Arabisch aan de Radboud Universiteit Nijmegen en voormalig directeur van het Nederlands-Vlaams Instituut Caïro Spring If, in Google, you type "Arab Spring" and hit the button, you get more than 14 mill

  16. Location of an intermediate hub for port activities

    Science.gov (United States)

    Burciu, Ş.; Ştefănică, C.; Roşca, E.; Dragu, V.; Ruscă, F.

    2015-11-01

    An intermediate hub might increase the accessibility level of ports but also hinterland and so it can be considered more than a facility with a transhipment role. These hubs might lead to the development of other transport services and enhance their role in gathering and covering economic centres within hinterlands and also getting the part of logistic facility for the ports, with effects on port utilization and its connectivity to global economy. A new location for a hub terminal leads to reduced transport distances within hinterland, with decreased transport costs and external effects, so with gains in people's life quality. Because the production and distribution systems are relatively fixed on short and medium term and the location decisions are strategic and on long term, the logistic chains activities location models have to consider the uncertainties regarding the possible future situations. In most models, production costs are considered equal, the location problem reducing itself to a problem that aims to minimize the total transport costs, meaning the transport problem. The main objective of the paper is to locate a hub terminal that links the producers of cereals that are going to be exported by naval transportation with the Romanian fluvial-maritime ports (Galaţi, Brăila). GIS environment can be used to integrate and analyse a great amount of data and has the ability of using functions as location - allocation models necessary both to private and public sector, being able to determine the optimal location for services like factories, warehouses, logistic platforms and other public services.

  17. Is reduced benthic flux related to the Diporeia decline? Analysis of spring blooms and whiting events in Lake Ontario

    Science.gov (United States)

    Watkins, James M.; Rudstam, Lars G.; Crabtree, Darran L.; Walsh, Maureen

    2013-01-01

    Benthic monitoring by USGS off the southern shore of Lake Ontario from October 1993 to October 1995 provides a detailed view of the early stages of the decline of the native amphipod Diporeia. A loss of the 1994 and 1995 year classes of Diporeia preceded the disappearance of the native amphipod at sites near Oswego and Rochester at depths from 55 to 130 m. In succeeding years, Diporeia populations continued to decline in Lake Ontario and were nearly extirpated by 2008. Explanations for Diporeia 's decline in the Great Lakes include several hypotheses often linked to the introduction and expansion of exotic zebra and quagga mussels (Dreissena sp.). We compare the timeline of the Diporeia decline in Lake Ontario with trends in two sources of organic matter to the sediments — spring diatom blooms and late summer whiting events. The 1994–95 decline of Diporeia coincided with localized dreissenid effects on phytoplankton in the nearshore and a year (April 1994 to May 1995) of decreased flux of organic carbon recorded by sediment traps moored offshore of Oswego. Later declines of profundal (> 90 m) Diporeia populations in 2003 were poorly associated with trends in spring algal blooms and late summer whiting events. Lake Ontario/Diporeia/Dreissena/remote sensing.

  18. SPRING 2016

    NARCIS (Netherlands)

    Steinberger, Jessica; Unknown, [Unknown

    SPRING 2016, 11th edition of the SPRING series, is a single-track event that was sponsored by the special interest group Security – Intrusion Detection and Response (SIDAR) of the German Informatics Society (GI). The purpose of SPRING is to provide young researchers the opportunity to discuss their

  19. Contextual Hub Analysis Tool (CHAT): A Cytoscape app for identifying contextually relevant hubs in biological networks

    Science.gov (United States)

    Wiencko, Heather L.; Bernal-Llinares, Manuel; Bryan, Kenneth; Lynn, David J.

    2016-01-01

    Highly connected nodes (hubs) in biological networks are topologically important to the structure of the network and have also been shown to be preferentially associated with a range of phenotypes of interest. The relative importance of a hub node, however, can change depending on the biological context. Here, we report a Cytoscape app, the Contextual Hub Analysis Tool (CHAT), which enables users to easily construct and visualize a network of interactions from a gene or protein list of interest, integrate contextual information, such as gene expression or mass spectrometry data, and identify hub nodes that are more highly connected to contextual nodes (e.g. genes or proteins that are differentially expressed) than expected by chance. In a case study, we use CHAT to construct a network of genes that are differentially expressed in Dengue fever, a viral infection. CHAT was used to identify and compare contextual and degree-based hubs in this network. The top 20 degree-based hubs were enriched in pathways related to the cell cycle and cancer, which is likely due to the fact that proteins involved in these processes tend to be highly connected in general. In comparison, the top 20 contextual hubs were enriched in pathways commonly observed in a viral infection including pathways related to the immune response to viral infection. This analysis shows that such contextual hubs are considerably more biologically relevant than degree-based hubs and that analyses which rely on the identification of hubs solely based on their connectivity may be biased towards nodes that are highly connected in general rather than in the specific context of interest. Availability: CHAT is available for Cytoscape 3.0+ and can be installed via the Cytoscape App Store ( http://apps.cytoscape.org/apps/chat). PMID:27853512

  20. Contextual Hub Analysis Tool (CHAT): A Cytoscape app for identifying contextually relevant hubs in biological networks.

    Science.gov (United States)

    Muetze, Tanja; Goenawan, Ivan H; Wiencko, Heather L; Bernal-Llinares, Manuel; Bryan, Kenneth; Lynn, David J

    2016-01-01

    Highly connected nodes (hubs) in biological networks are topologically important to the structure of the network and have also been shown to be preferentially associated with a range of phenotypes of interest. The relative importance of a hub node, however, can change depending on the biological context. Here, we report a Cytoscape app, the Contextual Hub Analysis Tool (CHAT), which enables users to easily construct and visualize a network of interactions from a gene or protein list of interest, integrate contextual information, such as gene expression or mass spectrometry data, and identify hub nodes that are more highly connected to contextual nodes (e.g. genes or proteins that are differentially expressed) than expected by chance. In a case study, we use CHAT to construct a network of genes that are differentially expressed in Dengue fever, a viral infection. CHAT was used to identify and compare contextual and degree-based hubs in this network. The top 20 degree-based hubs were enriched in pathways related to the cell cycle and cancer, which is likely due to the fact that proteins involved in these processes tend to be highly connected in general. In comparison, the top 20 contextual hubs were enriched in pathways commonly observed in a viral infection including pathways related to the immune response to viral infection. This analysis shows that such contextual hubs are considerably more biologically relevant than degree-based hubs and that analyses which rely on the identification of hubs solely based on their connectivity may be biased towards nodes that are highly connected in general rather than in the specific context of interest.

  1. Collaborative Data Analytics with DataHub.

    Science.gov (United States)

    Bhardwaj, Anant; Karger, David; Subramanyam, Harihar; Deshpande, Amol; Madden, Sam; Wu, Eugene; Elmore, Aaron; Parameswaran, Aditya; Zhang, Rebecca

    2015-08-01

    While there have been many solutions proposed for storing and analyzing large volumes of data, all of these solutions have limited support for collaborative data analytics, especially given the many individuals and teams are simultaneously analyzing, modifying and exchanging datasets, employing a number of heterogeneous tools or languages for data analysis, and writing scripts to clean, preprocess, or query data. We demonstrate DataHub, a unified platform with the ability to load, store, query, collaboratively analyze, interactively visualize, interface with external applications, and share datasets. We will demonstrate the following aspects of the DataHub platform: (a) flexible data storage, sharing, and native versioning capabilities: multiple conference attendees can concurrently update the database and browse the different versions and inspect conflicts; (b) an app ecosystem that hosts apps for various data-processing activities: conference attendees will be able to effortlessly ingest, query, and visualize data using our existing apps; (c) thrift-based data serialization permits data analysis in any combination of 20+ languages, with DataHub as the common data store: conference attendees will be able to analyze datasets in R, Python, and Matlab, while the inputs and the results are still stored in DataHub. In particular, conference attendees will be able to use the DataHub notebook - an IPython-based notebook for analyzing data and storing the results of data analysis.

  2. Supervised hub-detection for brain connectivity

    Science.gov (United States)

    Kasenburg, Niklas; Liptrot, Matthew; Reislev, Nina Linde; Garde, Ellen; Nielsen, Mads; Feragen, Aasa

    2016-03-01

    A structural brain network consists of physical connections between brain regions. Brain network analysis aims to find features associated with a parameter of interest through supervised prediction models such as regression. Unsupervised preprocessing steps like clustering are often applied, but can smooth discriminative signals in the population, degrading predictive performance. We present a novel hub-detection optimized for supervised learning that both clusters network nodes based on population level variation in connectivity and also takes the learning problem into account. The found hubs are a low-dimensional representation of the network and are chosen based on predictive performance as features for a linear regression. We apply our method to the problem of finding age-related changes in structural connectivity. We compare our supervised hub-detection (SHD) to an unsupervised hub-detection and a linear regression using the original network connections as features. The results show that the SHD is able to retain regression performance, while still finding hubs that represent the underlying variation in the population. Although here we applied the SHD to brain networks, it can be applied to any network regression problem. Further development of the presented algorithm will be the extension to other predictive models such as classification or non-linear regression.

  3. Hub Status and Indexation of Container Ports

    Directory of Open Access Journals (Sweden)

    Yong-An Park

    2015-06-01

    This study develops two sub-indexes of port classification and capacity, and combines cases of these two sub-indexes into various types in order to find a proper port hub index. The paper demonstrates how different types of port hub index are useful measurements for evaluating outputs and inputs of container ports. In a case analysis we show that the indexes of period variables and lagged variables have more explanatory power with regard to changes of port throughputs and high correlation with inputs.

  4. Groundwater flow cycling between a submarine spring and an inland fresh water spring

    Science.gov (United States)

    Davis, J. Hal; Verdi, Richard

    2014-01-01

    Spring Creek Springs and Wakulla Springs are large first magnitude springs that derive water from the Upper Floridan Aquifer. The submarine Spring Creek Springs are located in a marine estuary and Wakulla Springs are located 18 km inland. Wakulla Springs has had a consistent increase in flow from the 1930s to the present. This increase is probably due to the rising sea level, which puts additional pressure head on the submarine Spring Creek Springs, reducing its fresh water flow and increasing flows in Wakulla Springs. To improve understanding of the complex relations between these springs, flow and salinity data were collected from June 25, 2007 to June 30, 2010. The flow in Spring Creek Springs was most sensitive to rainfall and salt water intrusion, and the flow in Wakulla Springs was most sensitive to rainfall and the flow in Spring Creek Springs. Flows from the springs were found to be connected, and composed of three repeating phases in a karst spring flow cycle: Phase 1 occurred during low rainfall periods and was characterized by salt water backflow into the Spring Creek Springs caves. The higher density salt water blocked fresh water flow and resulted in a higher equivalent fresh water head in Spring Creek Springs than in Wakulla Springs. The blocked fresh water was diverted to Wakulla Springs, approximately doubling its flow. Phase 2 occurred when heavy rainfall resulted in temporarily high creek flows to nearby sinkholes that purged the salt water from the Spring Creek Springs caves. Phase 3 occurred after streams returned to base flow. The Spring Creek Springs caves retained a lower equivalent fresh water head than Wakulla Springs, causing them to flow large amounts of fresh water while Wakulla Springs flow was reduced by about half.

  5. Groundwater flow cycling between a submarine spring and an inland fresh water spring.

    Science.gov (United States)

    Davis, J Hal; Verdi, Richard

    2014-01-01

    Spring Creek Springs and Wakulla Springs are large first magnitude springs that derive water from the Upper Floridan Aquifer. The submarine Spring Creek Springs are located in a marine estuary and Wakulla Springs are located 18 km inland. Wakulla Springs has had a consistent increase in flow from the 1930s to the present. This increase is probably due to the rising sea level, which puts additional pressure head on the submarine Spring Creek Springs, reducing its fresh water flow and increasing flows in Wakulla Springs. To improve understanding of the complex relations between these springs, flow and salinity data were collected from June 25, 2007 to June 30, 2010. The flow in Spring Creek Springs was most sensitive to rainfall and salt water intrusion, and the flow in Wakulla Springs was most sensitive to rainfall and the flow in Spring Creek Springs. Flows from the springs were found to be connected, and composed of three repeating phases in a karst spring flow cycle: Phase 1 occurred during low rainfall periods and was characterized by salt water backflow into the Spring Creek Springs caves. The higher density salt water blocked fresh water flow and resulted in a higher equivalent fresh water head in Spring Creek Springs than in Wakulla Springs. The blocked fresh water was diverted to Wakulla Springs, approximately doubling its flow. Phase 2 occurred when heavy rainfall resulted in temporarily high creek flows to nearby sinkholes that purged the salt water from the Spring Creek Springs caves. Phase 3 occurred after streams returned to base flow. The Spring Creek Springs caves retained a lower equivalent fresh water head than Wakulla Springs, causing them to flow large amounts of fresh water while Wakulla Springs flow was reduced by about half. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

  6. Beginning Spring

    CERN Document Server

    Caliskan, Mert

    2015-01-01

    Get up to speed quickly with this comprehensive guide toSpring Beginning Spring is the complete beginner's guide toJava's most popular framework. Written with an eye towardreal-world enterprises, the book covers all aspects of applicationdevelopment within the Spring Framework. Extensive samples withineach chapter allow developers to get up to speed quickly byproviding concrete references for experimentation, building askillset that drives successful application development byexploiting the full capabilities of Java's latest advances. Spring provides the exact toolset required to build anent

  7. Just Spring

    CERN Document Server

    Konda, Madhusudhan

    2011-01-01

    Get a concise introduction to Spring, the increasingly popular open source framework for building lightweight enterprise applications on the Java platform. This example-driven book for Java developers delves into the framework's basic features, as well as advanced concepts such as containers. You'll learn how Spring makes Java Messaging Service easier to work with, and how its support for Hibernate helps you work with data persistence and retrieval. Throughout Just Spring, you'll get your hands deep into sample code, beginning with a problem that illustrates dependency injection, Spring's co

  8. Exploring hubness in Regional Trade Agreements

    NARCIS (Netherlands)

    Vaal, A. de

    2016-01-01

    In the plethora of Regional Trade Agreements (RTAs) some countries take in a more central position than others in the sense that some countries are much more engaged with other countries through RTAs. Furthermore, the position of some countries is that of a hub: they have (many) trade

  9. Hub location problems in transportation networks

    DEFF Research Database (Denmark)

    Gelareh, Shahin; Nickel, Stefan

    2011-01-01

    In this paper we propose a 4-index formulation for the uncapacitated multiple allocation hub location problem tailored for urban transport and liner shipping network design. This formulation is very tight and most of the tractable instances for MIP solvers are optimally solvable at the root node....... also introduce fixed cost values for Australian Post (AP) dataset....

  10. Optimising steel hub location in Thailand

    Directory of Open Access Journals (Sweden)

    Sakaradhorn Boontaveeyuwat

    2012-11-01

    Full Text Available The optimal location of a steel hub in Thailand was analysed by applying aspecific research methodology designed to evaluate locations near the seaports. The growth of Thailand’s steel industry has become a centre of attention in the last decade, resulting in substantial efforts to form a distribution service centre to minimise the logistic costs associated with handling large steel flows in the future. The main analysis of the steel hublocation focused on areas situated near Laem Cha Bang, Map Ta Phut and Prachuab ports since these top three ports are considered important in terms of their steel throughput in Thailand. The transport costs associated with the shipment and inland transport together with port tariffs were calculated for the proposed scenarios of steel hub establishment andthese were compared with the existing situation without steel hub. The findings showed that a steel hub located near Laem Cha Bang port was the optimal option involving a saving of 9.4% on the total system costs incurred under the existing situation.

  11. A State Cyber Hub Operations Framework

    Science.gov (United States)

    2016-06-01

    level cyber operations from state information technology (IT) and network infrastructure to hospitals , commercial banking, and manufacturing the...tools - TTPs necessary to operate and maintain Authoritative Data Repository for operational related artifacts . - Monitor and report on operations...development of Data Repository structures to enable storage of Cyber Hub related artifacts . - Provides Technical input to Business Case Analyses (BCAs

  12. Integrated application of February Orchid (Orychophragmus violaceus) as green manure with chemical fertilizer for improving grain yield and reducing nitrogen losses in spring maize system in northern China

    Institute of Scientific and Technical Information of China (English)

    BAI Jin-shun; CAO Wei-dong; XIONG Jing; ZENG Nao-hua; GAO Song-juan; Shimizu Katsuyoshi

    2015-01-01

    The development of more efifcient management systems is crucial to achieving high grain yields with high nitrogen use efifciency (NUE). February Orchid-spring maize rotation system is a newly established planting system with the beneifts of ground cover and potential wind erosion in northern China. A ifeld experiment was conducted to evaluate the effects of integrated application of February Orchid as green manure with reduction of chemical fertilizers (INTEGRATED) on spring maize yield, N uptake, ammonium volatilization, and soil residual mineral N in northern China. Compared to farmers’ traditional fertilization (CON), integrated application of February Orchid as green manure with 30% reduction of nitrogen fertilizers (INTEGRATED) increased maize grain yield and biomass by 9.9 and 10.2%, respectively. The 0–100 cm soil residual Nmin at harvest was decreased by 58.5% and thus nitrogen use efifciency was increased signiifcantly by 26.7%. The nitrogen balance calculation further demonstrated that the INTEGRATED approach performed better than CON with lower apparent nitrogen loss (decreased by 48.9%) which evidenced by the ammonium volatilization of top-dressing fertilizer was decreased by 31.1%, the Nmin movement to the deeper soil layers was reduced, and the apparent nitrogen leaching loss nearly equal to 0 under the INTEGRATED treatment. Therefore, in northern China, integrated application of green manure and chemical fertilizers is an efifcient management approach for improving maize yields and NUE simultaneously.

  13. Constructing Hongqiao Hub and Serving Regional Economy:Planning and Operation of Hongqiao Comprehensive Transportation Hub

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Taking Hongqiao Integrated Transportation Hub Project as a case, this paper introduces its origin, orientation, development programming, planning and design, road planning, information system planning, air-rail integrated transportation planning, disaster prevention planning, and so on.

  14. Over-heated Investment in Aluminum Hub Industry

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>Aluminum hub is one of typical products with the comparative advantages.China’s aluminum hub industry is very competitive.In recent years,the value of export for the aluminum hub soared,increasing from USD130 millions in 1999 up to nearly USD1 billion in 2004.The main exporter are Wanfeng Auto Holding Group,Shanghai Fervent Alloy Wheel MFG Co.,Ltd.,Nanhai Zhongnan Aluminum Co., Ltd.,Taian Huatai Aluminum Hub Co.,Ltd.

  15. Spring Festival

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Spring Festival is the most important festival in China. It's to celebrate the lunar calendar's new year. In the evening before the Spring Festival, families get together and have a big meal. In many places people like to set off firecrackers. Dumplings are

  16. Permanent draft genome sequence of Desulfurococcus mobilis type strain DSM 2161, a thermoacidophilic sulfur-reducing crenarchaeon isolated from acidic hot springs of Hveravellir, Iceland.

    Science.gov (United States)

    Susanti, Dwi; Johnson, Eric F; Lapidus, Alla; Han, James; Reddy, T B K; Pilay, Manoj; Ivanova, Natalia N; Markowitz, Victor M; Woyke, Tanja; Kyrpides, Nikos C; Mukhopadhyay, Biswarup

    2016-01-01

    This report presents the permanent draft genome sequence of Desulfurococcus mobilis type strain DSM 2161, an obligate anaerobic hyperthermophilic crenarchaeon that was isolated from acidic hot springs in Hveravellir, Iceland. D. mobilis utilizes peptides as carbon and energy sources and reduces elemental sulfur to H2S. A metabolic construction derived from the draft genome identified putative pathways for peptide degradation and sulfur respiration in this archaeon. Existence of several hydrogenase genes in the genome supported previous findings that H2 is produced during the growth of D. mobilis in the absence of sulfur. Interestingly, genes encoding glucose transport and utilization systems also exist in the D. mobilis genome though this archaeon does not utilize carbohydrate for growth. The draft genome of D. mobilis provides an additional mean for comparative genomic analysis of desulfurococci. In addition, our analysis on the Average Nucleotide Identity between D. mobilis and Desulfurococcus mucosus suggested that these two desulfurococci are two different strains of the same species.

  17. Southwest Regional Climate Hub and California Subsidiary Hub assessment of climate change vulnerability and adaptation and mitigation strategies

    Science.gov (United States)

    Emile Elias; Caiti Steele; Kris Havstad; Kerri Steenwerth; Jeanne Chambers; Helena Deswood; Amber Kerr; Albert Rango; Mark Schwartz; Peter Stine; Rachel Steele

    2015-01-01

    This report is a joint effort of the Southwest Regional Climate Hub and the California Subsidiary Hub (Sub Hub). The Southwest Regional Climate Hub covers Arizona, California, Hawai‘i and the U.S. affiliated Pacific Islands, Nevada, New Mexico, and Utah and contains vast areas of western rangeland, forests, and high-value specialty crops (Figure 1). The California Sub...

  18. Extension of Goldstein's circulation function for optimal rotors with hub

    DEFF Research Database (Denmark)

    Okulov, Valery; Sørensen, Jens Nørkær; Shen, Wen Zhong

    2016-01-01

    The aerodynamic interaction or interference between rotor blades and hub body is usually very complicated, but some useful simplifications can be made by considering the hub with an infinite cylinder. Various attempts to find the optimum distribution of circulation by the lifting vortex lines...... method have been previously proposed to describe the blade interaction with the hub modeled by the infinite cylinder. In this case, the ideal distribution of bound circulation on the rotor blades is such that the shed vortex system in the hub-area is a set of helicoidal vortex sheets moving uniformly...... at the nose-area of the semi-infinite hub....

  19. Microbial community profiling of the Chinoike Jigoku ("Blood Pond Hell") hot spring in Beppu, Japan: isolation and characterization of Fe(III)-reducing Sulfolobus sp. strain GA1.

    Science.gov (United States)

    Masaki, Yusei; Tsutsumi, Katsutoshi; Hirano, Shin-Ichi; Okibe, Naoko

    2016-09-01

    Chinoike Jigoku ("Blood Pond Hell") is located in the hot spring town of Beppu on the southern island of Kyushu in Japan, and is the site of a red-colored acidic geothermal pond. This study aimed to investigate the microbial population composition in this extremely acidic environment and to isolate/characterize acidophilic microorganism with metal-reducing ability. Initially, PCR (using bacteria- and archaea-specific primers) of environmental DNA samples detected the presence of bacteria, but not archaea. This was followed by random sequencing analysis, confirming the presence of wide bacterial diversity at the site (123 clones derived from 18 bacterial and 1 archaeal genera), including those closely related to known autotrophic and heterotrophic acidophiles (Acidithiobacillus sp., Sulfobacillus sp., Alicyclobacillus sp.). Nevertheless, successive culture enrichment with Fe(III) under micro-aerobic conditions led to isolation of an unknown archaeal organism, Sulfolobus sp. GA1 (with 99.7% 16S rRNA gene sequence identity with Sulfolobus shibatae). Unlike many other known Sulfolobus spp., strain GA1 was shown to lack sulfur oxidation ability. Strain GA1 possessed only minor Fe(II) oxidation ability, but readily reduced Fe(III) during heterotrophic growth under micro-aerobic conditions. Strain GA1 was capable of reducing highly toxic Cr(VI) to less toxic/soluble Cr(III), demonstrating its potential utility in bioremediation of toxic metal species.

  20. Developmental Changes in Brain Network Hub Connectivity in Late Adolescence.

    Science.gov (United States)

    Baker, Simon T E; Lubman, Dan I; Yücel, Murat; Allen, Nicholas B; Whittle, Sarah; Fulcher, Ben D; Zalesky, Andrew; Fornito, Alex

    2015-06-17

    The human brain undergoes substantial development throughout adolescence and into early adulthood. This maturational process is thought to include the refinement of connectivity between putative connectivity hub regions of the brain, which collectively form a dense core that enhances the functional integration of anatomically distributed, and functionally specialized, neural systems. Here, we used longitudinal diffusion magnetic resonance imaging to characterize changes in connectivity between 80 cortical and subcortical anatomical regions over a 2 year period in 31 adolescents between the ages of 15 and 19 years. Connectome-wide analysis indicated that only a small subset of connections showed evidence of statistically significant developmental change over the study period, with 8% and 6% of connections demonstrating decreased and increased structural connectivity, respectively. Nonetheless, these connections linked 93% and 90% of the 80 regions, respectively, pointing to a selective, yet anatomically distributed pattern of developmental changes that involves most of the brain. Hub regions showed a distinct tendency to be highly connected to each other, indicating robust "rich-club" organization. Moreover, connectivity between hubs was disproportionately influenced by development, such that connectivity between subcortical hubs decreased over time, whereas frontal-subcortical and frontal-parietal hub-hub connectivity increased over time. These findings suggest that late adolescence is characterized by selective, yet significant remodeling of hub-hub connectivity, with the topological organization of hubs shifting emphasis from subcortical hubs in favor of an increasingly prominent role for frontal hub regions.

  1. Spatial Economic Hubs and State Power

    Institute of Scientific and Technical Information of China (English)

    Xuan Xingzhang; Huang Jing

    2008-01-01

    The paper seeks to analyze the rise of state power in the light of spatial economic shifts and examines the historical context of China's rise and challenges facing it. In world history, only countries that were spatial economic hubs have been able to enjoy prosperity over centuries. China is not yet such a country, despite its persistent efforts. Nor is China likely to become an economic hub in the foreseeable future. China is under mounting pressure from new economic demands posed by shifts in the geo-economic status of the U.S.. The fact that the global economy thrives along coastlines also causes problems for China, a country with a long coastline and a vast hinterland, creating rifts between northern and southern China, central and local governments, and different provinces. All these factors might well hinder China's development in the future.

  2. Topographic hub maps of the human structural neocortical network.

    Directory of Open Access Journals (Sweden)

    Emil H J Nijhuis

    Full Text Available Hubs within the neocortical structural network determined by graph theoretical analysis play a crucial role in brain function. We mapped neocortical hubs topographically, using a sample population of 63 young adults. Subjects were imaged with high resolution structural and diffusion weighted magnetic resonance imaging techniques. Multiple network configurations were then constructed per subject, using random parcellations to define the nodes and using fibre tractography to determine the connectivity between the nodes. The networks were analysed with graph theoretical measures. Our results give reference maps of hub distribution measured with betweenness centrality and node degree. The loci of the hubs correspond with key areas from known overlapping cognitive networks. Several hubs were asymmetrically organized across hemispheres. Furthermore, females have hubs with higher betweenness centrality and males have hubs with higher node degree. Female networks have higher small-world indices.

  3. Extension of Goldstein's circulation function for optimal rotors with hub

    Science.gov (United States)

    Okulov, V. L.; Sørensen, J. N.; Shen, W. Z.

    2016-09-01

    The aerodynamic interaction or interference between rotor blades and hub body is usually very complicated, but some useful simplifications can be made by considering the hub with an infinite cylinder. Various attempts to find the optimum distribution of circulation by the lifting vortex lines method have been previously proposed to describe the blade interaction with the hub modeled by the infinite cylinder. In this case, the ideal distribution of bound circulation on the rotor blades is such that the shed vortex system in the hub-area is a set of helicoidal vortex sheets moving uniformly as if rigid, exactly as in the case where there is no influence of the streamtube deformations by the central hub-body. In the present investigation, we consider a more specific problem of the rotor-hub interaction where the initial flow streamtubes and the rotor slipstream submitted strong deformations at the nose-area of the semi-infinite hub.

  4. Walking with springs

    Science.gov (United States)

    Sugar, Thomas G.; Hollander, Kevin W.; Hitt, Joseph K.

    2011-04-01

    Developing bionic ankles poses great challenges due to the large moment, power, and energy that are required at the ankle. Researchers have added springs in series with a motor to reduce the peak power and energy requirements of a robotic ankle. We developed a "robotic tendon" that reduces the peak power by altering the required motor speed. By changing the required speed, the spring acts as a "load variable transmission." If a simple motor/gearbox solution is used, one walking step would require 38.8J and a peak motor power of 257 W. Using an optimized robotic tendon, the energy required is 21.2 J and the peak motor power is reduced to 96.6 W. We show that adding a passive spring in parallel with the robotic tendon reduces peak loads but the power and energy increase. Adding a passive spring in series with the robotic tendon reduces the energy requirements. We have built a prosthetic ankle SPARKy, Spring Ankle with Regenerative Kinetics, that allows a user to walk forwards, backwards, ascend and descend stairs, walk up and down slopes as well as jog.

  5. Ranking hubs and authorities using matrix functions

    OpenAIRE

    2012-01-01

    The notions of subgraph centrality and communicability, based on the exponential of the adjacency matrix of the underlying graph, have been effectively used in the analysis of undirected networks. In this paper we propose an extension of these measures to directed networks, and we apply them to the problem of ranking hubs and authorities. The extension is achieved by bipartization, i.e., the directed network is mapped onto a bipartite undirected network with twice as many nodes in order to ob...

  6. Developing Istanbul into a Regional Business Hub

    Science.gov (United States)

    2004-12-01

    beds). Every year Istanbul hosts people from all around the world for international summits, conferences, film and music festivals and sports...Kong, Taiwan, Malaysia , Thailand, and the Philippines are positioning themselves to be logistics hubs. On the other hand, in Eastern Europe; Czech...close to nearby major markets of the world, are only some of Turkey’s many advantages. 2. Istanbul Throughout history , Istanbul has been a city at the

  7. Developing a Radiation Protection Hub

    Energy Technology Data Exchange (ETDEWEB)

    Hertel, Nolan E [ORNL

    2017-01-01

    The WARP report issued by the NCRP study committee estimates that in ten years there will be a human capital crisis across the radiation safety community. The ability to respond to this shortage will be amplified by the fact that many radiation protection (health physics) academic programs will find it difficult to justify their continued existence since they are low volume programs, both in terms of enrollment and research funding, compared to the research funding return and visibility of more highly subscribed and highly funded academic disciplines. In addition, across the national laboratory complex, radiation protection research groups have been disbanded or dramatically reduced in size. The loss of both of these national resources is being accelerated by low and uncertain government funding priorities. The most effective solution to this problem would be to form a consortium that would bring together the radiation protection research, academic and training communities. The goal of such a consortium would be to engage in research, education and training of the next generation of radiation protection professionals. Furthermore the consortium could bring together the strengths of different universities, national laboratory programs and other entities in a strategic manner to accomplish a multifaceted research, educational and training agenda. This vision would forge a working and funded relationship between major research universities, national labs, four-year degree institutes, technical colleges and other partners.

  8. PASSENGER SERVICE QUALITY PARAMETERS ASSESSMENT AT TRANSPORT INTERCHANGE HUBS

    Directory of Open Access Journals (Sweden)

    Kozlov Pavel Igorevich

    2017-05-01

    Full Text Available The article discusses a quality assessment method for transport decisions made in transport interchange hubs. Analysis of domestic regulatory documentation and international experience on this subject is performed. It is stated that the domestic regulatory documentation lacks such method of assessment. Special attention is paid to study of pedestrian flows in interchange complexes of intermodal transport interchange hubs. The aim of the study is development of the Level of Service comprehensive assessment criterion by analogy with the international practice. The authors propose to use the queueing theory with elements of the theory of graphs, techniques and regularities that underlie the Level of Service (service factor applied in planning and location of TIH in the USA as well as data from field surveys carried out by the pedestrian flows video detection method. During the field surveys it is planned to perform analysis of external and internal factors influencing the formation and composition of a pedestrian flow, to determine quantitative values of the main parameters of pedestrian flow (density, speed, intensity and regularities of their variation depending on the design features of pedestrian traffic environment. Determination of passenger service quality factors in TIH will help to develop an integral criterion based on the Level of Service, taking into account the specifics of TIH functioning in Russia as well as a methodology that allows a reasonable choice of combinations of structural elements and planning parameters of pedestrian traffic objects which will let to reduce construction costs and operating costs for location of interchange complexes.

  9. Design and Development of an Integrated Workstation Automation Hub

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Andrew; Ghatikar, Girish; Sartor, Dale; Lanzisera, Steven

    2015-03-30

    Miscellaneous Electronic Loads (MELs) account for one third of all electricity consumption in U.S. commercial buildings, and are drivers for a significant energy use in India. Many of the MEL-specific plug-load devices are concentrated at workstations in offices. The use of intelligence, and integrated controls and communications at the workstation for an Office Automation Hub – offers the opportunity to improve both energy efficiency and occupant comfort, along with services for Smart Grid operations. Software and hardware solutions are available from a wide array of vendors for the different components, but an integrated system with interoperable communications is yet to be developed and deployed. In this study, we propose system- and component-level specifications for the Office Automation Hub, their functions, and a prioritized list for the design of a proof-of-concept system. Leveraging the strength of both the U.S. and India technology sectors, this specification serves as a guide for researchers and industry in both countries to support the development, testing, and evaluation of a prototype product. Further evaluation of such integrated technologies for performance and cost is necessary to identify the potential to reduce energy consumptions in MELs and to improve occupant comfort.

  10. Effect of random and hub gene disruptions on environmental and mutational robustness in Escherichia coli

    Directory of Open Access Journals (Sweden)

    Schneider Dominique

    2006-09-01

    Full Text Available Background Genome-wide profiling has allowed the regulatory interaction networks of many organisms to be visualised and the pattern of connections between genes to be studied. These networks are non-random, following a power-law distribution with a small number of well-connected 'hubs' and many genes with only one or a few connections. Theoretical work predicts that power-law networks display several unique properties. One of the most biologically interesting of these is an intrinsic robustness to disturbance such that removal of a random gene will have little effect on network function. Conversely, targeted removal of a hub gene is expected to have a large effect. Results We compared the response of Escherichia coli to environmental and mutational stress following disruption of random or hub genes. We found that disruption of random genes had less effect on robustness to environmental stress than did the targeted disruption of hub genes. In contrast, random disruption strains were slightly less robust to the effect of mutational stress than were hub disruption strains. When we compared the effect of each disruption on environmental and mutational stress, we found a negative relationship, such that strains that were more environmentally robust tended to be less robust to mutational stress. Conclusion Our results demonstrate that mutant strains of E. coli respond differently to stress, depending on whether random or hub genes are disrupted. This difference indicates that the power-law distribution of regulatory interactions has biological significance, making random disruptions less deleterious to organisms facing environmental stress. That E. coli can reduce the effect of environmental stress without reducing the phenotypic effect of additional mutations, indicates that robustness and evolvability need not be antagonistic.

  11. Quantum Spring

    Science.gov (United States)

    Feng, Chao-Jun; Li, Xin-Zhou

    In this paper, we will give a short review on quantum spring, which is a Casimir effect from the helix boundary condition that proposed in our earlier works. The Casimir force parallel to the axis of the helix behaves very much like the force on a spring that obeys the Hooke's law when the ratio r of the pitch to the circumference of the helix is small, but in this case, the force comes from a quantum effect, so we would like to call it quantum spring. On the other hand, the force perpendicular to the axis decreases monotonously with the increasing of the ratio r. Both forces are attractive and their behaviors are the same in two and three dimensions.

  12. Supervised hub-detection for brain connectivity

    DEFF Research Database (Denmark)

    Kasenburg, Niklas; Liptrot, Matthew George; Reislev, Nina Linde

    2016-01-01

    A structural brain network consists of physical connections between brain regions. Brain network analysis aims to find features associated with a parameter of interest through supervised prediction models such as regression. Unsupervised preprocessing steps like clustering are often applied......-detection and a linear regression using the original network connections as features. The results show that the SHD is able to retain regression performance, while still finding hubs that represent the underlying variation in the population. Although here we applied the SHD to brain networks, it can be applied to any...

  13. An Introduction to Version Control Using GitHub Desktop

    Directory of Open Access Journals (Sweden)

    Daniel van Strien

    2016-06-01

    Full Text Available In this lesson you will be introduced to the basics of version control, understand why it is useful and implement basic version control for a plain text document using GitHub Desktop. By the end of this lesson you should understand: * what version control is and why it can be useful * the differences between Git and GitHub * how to implement version control using ‘GitHub Desktop,’ a Graphical User Interface for GitHub * be aware of other resources that will help you implement version control in your academic writing

  14. An Introduction to Version Control Using GitHub Desktop

    OpenAIRE

    Daniel van Strien

    2016-01-01

    In this lesson you will be introduced to the basics of version control, understand why it is useful and implement basic version control for a plain text document using GitHub Desktop. By the end of this lesson you should understand: * what version control is and why it can be useful * the differences between Git and GitHub * how to implement version control using ‘GitHub Desktop,’ a Graphical User Interface for GitHub * be aware of other resources that will help you imple...

  15. Liner Shipping Hub Network Design in a Competitive Environment

    DEFF Research Database (Denmark)

    Gelareh, Shahin; Nickel, Stefan; Pisinger, David

    A new mixed integer programming formulation is proposed for hub-and-spoke network design in a competitive environment. It addresses competition between a newcomer liner service provider and an alliance, both operating on hub-and-spoke networks. The newcomer company maximizes its market share...

  16. Liner shipping hub network design in a competitive environment

    DEFF Research Database (Denmark)

    Gelareh, Shahin; Nickel, Stefan; Pisinger, David

    2010-01-01

    A mixed integer programming formulation is proposed for hub-and-spoke network design in a competitive environment. It addresses the competition between a newcomer liner service provider and an existing dominating operator, both operating on hub-and-spoke networks. The newcomer company maximizes its...

  17. International Education Hubs: Collaboration for Competitiveness and Sustainability

    Science.gov (United States)

    Knight, Jane

    2014-01-01

    This chapter focuses on the development of education hubs, a recent phenomenon in international higher education. Three models of hubs are examined in relation to the forces, risks, and opportunities of globalization and how local and international collaborations are essential for both global competitiveness and sustainability.

  18. Soft Power and Cultural Diplomacy: Emerging Education Hubs in Asia

    Science.gov (United States)

    Lee, Jack T.

    2015-01-01

    Several education hubs have emerged in Asia and the Middle East in recent years with a specific focus on cross-border higher education. Through considerable efforts in policy planning and generous funding, these hubs aim to transform a country or city into an eminent destination for education, research, and training. The inherent design of these…

  19. Optimal Model and Solution of Railway Hub Shift Working Plan

    Institute of Scientific and Technical Information of China (English)

    He Shiwei; Zhu Songnian; Lin Boliang

    1996-01-01

    Aiming at decreasing the hub transportation costs, a railway hub shift working plan in terms of multicommodity network flow model is set up for considering the coordination of freight working, train working and locomotive working plans. The solution and the calculating results are also introduced.

  20. Phased arrays: inline flow line hub inspection using phased arrays

    NARCIS (Netherlands)

    Bloom, J.G.P.; Chougrani, K.; Rundberg, H.; Oldenziel, G.; Deleye, X.; Martina, Q.

    2011-01-01

    The feasibility of the inspection of flow line hubs using the phased array technique was investigated to determine the surface area of the seal area degraded by corrosion. A clean model of the hub was simulated to gain insight into the geometrical echoes and to determine the area covered by the ultr

  1. A versatile framework for cooperative hub network development

    NARCIS (Netherlands)

    Cruijssen, F.C.A.M.; Borm, P.; Dullaert, W.; Hamers, H.

    2010-01-01

    This paper introduces a framework for cooperative hub network development. Building a joint physical hub for the transshipment of goods is expensive and, therefore, involves considerable risks for cooperating companies. In a practical setting, it is unlikely that an entire network will be built at o

  2. Education Hubs: A Fad, a Brand, an Innovation?

    Science.gov (United States)

    Knight, Jane

    2011-01-01

    The last decade has seen significant changes in all aspects of internationalization but most dramatically in the area of education and research moving across national borders. The most recent developments are education hubs. The term "education hub" is being used by countries who are trying to build a critical mass of local and foreign…

  3. Soft Power and Cultural Diplomacy: Emerging Education Hubs in Asia

    Science.gov (United States)

    Lee, Jack T.

    2015-01-01

    Several education hubs have emerged in Asia and the Middle East in recent years with a specific focus on cross-border higher education. Through considerable efforts in policy planning and generous funding, these hubs aim to transform a country or city into an eminent destination for education, research, and training. The inherent design of these…

  4. Climate programs update: USDA Southwest Regional Climate Hub update

    Science.gov (United States)

    PROGRAM OVERVIEW: The overarching goal of the USDA SW Climate Hub is to assist farmers, ranchers and foresters in addressing the effects of climate change including prolonged drought, increased insect outbreaks and severe wildfires. In the first year of operations, the SW Climate Hub (est. Februa...

  5. Liner shipping hub network design in a competitive environment

    DEFF Research Database (Denmark)

    Gelareh, Shahin; Nickel, Stefan; Pisinger, David

    2010-01-01

    A mixed integer programming formulation is proposed for hub-and-spoke network design in a competitive environment. It addresses the competition between a newcomer liner service provider and an existing dominating operator, both operating on hub-and-spoke networks. The newcomer company maximizes i...

  6. International Education Hubs: Collaboration for Competitiveness and Sustainability

    Science.gov (United States)

    Knight, Jane

    2014-01-01

    This chapter focuses on the development of education hubs, a recent phenomenon in international higher education. Three models of hubs are examined in relation to the forces, risks, and opportunities of globalization and how local and international collaborations are essential for both global competitiveness and sustainability.

  7. Hub-and-Spoke or else? Free trade agreements in the 'enlarged' European Union

    Directory of Open Access Journals (Sweden)

    Roberta De Santis

    2005-12-01

    Full Text Available The object of this paper is to estimate if and how the Central European Free Trade Agreement (CEFTA and the Baltic Free Trade Agreement (BFTA exerted a significant impact on intra-European trade, effectively reducing the influence of the European Association Agreements (EAs in shaping the European trade structure as a hub-and-spoke system - with the EU15 being the hub and the CEECs the spoke. This paper analyses bilateral trade flows between eight CEECs and EU-23. We estimate a gravity equation using a system GMM dynamic panel data approach. Results support the assumptions that gravity forces and "persistence effects" matter. With respect to the effect of free trade agreements, evidence is found that Free trade agreements between CEECs matter: There is evidence that the presence of intra-periphery agreements helped expand intra-periphery trade and limited the emergence of a "hub-and-spoke" relationship between CEECs and EU. This results have important policy implications for the trade strategy of "future" EU members of the Southeastern European Countries as well as of the Southern Mediterranean Countries. According to the empirical results, these countries should move towards a regional free-trade area as exemplified by the CEFTA and the BFTA to avoid "hub-and-spoke" effects.

  8. Development of passive-controlled HUB (teetered brake & damper mechanism) of horizontal axis wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Yukimaru; Kamada, Yasunari; Maeda, Takao [Mie Univ. (Japan)

    1997-12-31

    For the purpose of the improvement of reliability of the Mega-Watt wind turbine, this paper indicates the development of an original mechanism for the passive-controlled hub, which has the effects of braking and damping on aerodynamic forces. This mechanism is useful for variable speed control of the large wind turbine. The passive-controlled hub is the combination of two mechanisms. One is the passive-teetered and damping mechanism, and the other is the passive-variable-pitch mechanism. These mechanism are carried out by the combination of the teetering and feathering motions. When the wind speed exceeds the rated wind speed, the blade is passively teetered in a downwind direction and, simultaneously, a feathering mechanism, which is linked to the teetering mechanism through a connecting rods, is activated. Testing of the model horizontal axis wind turbine in a wind tunnel showed that the passive-controlled hub mechanism can suppress the over-rotational speed of the rotor. By the application of the passive-controlled hub mechanism, the maximum rotor speed is reduced to about 60%.

  9. The 4 Pi Sky Transient Alerts Hub

    CERN Document Server

    Staley, Tim D

    2016-01-01

    We introduce the 4 Pi Sky 'hub', a collection of open data-services and underlying software packages built for rapid, fully automated reporting and response to astronomical transient alerts. These packages build on the mature 'VOEvent' standardized message-format, and aim to provide a decentralized and open infrastructure for handling transient alerts. In particular we draw attention to the initial release of voeventdb, an archive and remote-query service that allows astronomers to make historical queries about transient alerts. By employing spatial filters and web-of-citation lookups, voeventdb enables cross-matching of transient alerts to bring together data from multiple sources, as well as providing a point of reference when planning new follow-up campaigns. We also highlight the recent addition of optical-transient feeds from the ASASSN and GAIA projects to our VOEvent distribution stream. Both the source-code and deployment-scripts which implement these services are freely available and permissively lic...

  10. Location of Urban Logistic Terminals as Hub Location Problem

    Directory of Open Access Journals (Sweden)

    Jasmina Pašagić Škrinjar

    2012-09-01

    Full Text Available In this paper the problems of locating urban logistic terminals are studied as hub location problems that due to a large number of potential nodes in big cities belong to hard non-polynomial problems, the so-called NP-problems. The hub location problems have found wide application in physical planning of transport and telecommunication systems, especially systems of fast delivery, networks of logistic and distribution centres and cargo traffic terminals of the big cities, etc. The paper defines single and multiple allocations and studies the numerical examples. The capacitated single allocation hub location problems have been studied, with the provision of a mathematical model of selecting the location for the hubs on the network. The paper also presents the differences in the possibilities of implementing the exact and heuristic methods to solve the actual location problems of big dimensions i.e. hub problems of the big cities.

  11. Hub exchange operations in intermodal hub-and spoke networks : a performance comparison of rail-rail exchange facilities

    NARCIS (Netherlands)

    Bontekoning, Y.M.

    2006-01-01

    The implementation of hub-and-spoke networks in intermodal transport is suggested as one of the potential solutions for helping to increase the intermodal market share. Traditionally, trains are shunted at hubs; this is a time-consuming process. Since the early 1990s a new type of intermodal termina

  12. Getting started with Spring Framework a hands-on guide to begin developing applications using Spring Framework

    CERN Document Server

    Sharma, J

    2016-01-01

    Getting started with Spring Framework is a hands-on guide to begin developing applications using Spring Framework. The examples (consisting of 74 sample projects) that accompany this book are based on Spring 4.3 and Java 8. You can download the examples described in this book from the following GitHub project:github.com/getting-started-with-spring/3rdEdition This book is meant for Java developers with little or no knowledge of Spring Framework. Getting started with Spring Framework, Third Edition has been updated to reflect changes in Spring 4.3 and also includes new chapters on Java-based configuration and Spring Data (covers Spring Data JPA and Spring Data MongoDB projects). The existing chapters have been revised to include information on Java-based configuration. The book also includes some new information on bean definition profiles, importing application context XML files, lazy autowiring, creating custom qualifier annotations, JSR 349 annotations, spring-messaging module, Java 8's Optional type, and s...

  13. Flow Merging and Hub Route Optimization in Collaborative Transportation

    Directory of Open Access Journals (Sweden)

    Kerui Weng

    2014-01-01

    Full Text Available This paper studies the optimal hub routing problem of merged tasks in collaborative transportation. This problem allows all carriers’ transportation tasks to reach the destinations optionally passing through 0, 1, or 2 hubs within limited distance, while a cost discount on arcs in the hub route could be acquired after paying fixed charges. The problem arises in the application of logistics, postal services, airline transportation, and so forth. We formulate the problem as a mixed-integer programming model, and provide two heuristic approaches, respectively, based on Lagrangian relaxation and Benders decomposition. Computational experiments show that the algorithms work well.

  14. GitHub open source project recommendation system

    OpenAIRE

    Matek, Tadej; Zebec, Svit Timej

    2016-01-01

    Hosting platforms for software projects can form collaborative social networks and a prime example of this is GitHub which is arguably the most popular platform of this kind. An open source project recommendation system could be a major feature for a platform like GitHub, enabling its users to find relevant projects in a fast and simple manner. We perform network analysis on a constructed graph based on GitHub data and present a recommendation system that uses link prediction.

  15. The Opportunities and Threats of Turning Airports into Hubs

    Science.gov (United States)

    Kraus, Andreas; Koch, Benjamin

    2006-01-01

    This paper examines the opportunities and threats which arise when turning origin/destination airports into hubs. The analysis focuses on market development trends, competitive structures, especially in the light of airline network strategies and the growing rivalry between airports, and finally the potential financial impacts for the airport, including both investment efforts and the financial results from hub operations. We argue that in most cases a decision against converting a traditional origin/destination airport into a major transfer point is preferable to the transformation into a hub.

  16. A Hedonism Hub in the Human Brain

    Science.gov (United States)

    Zacharopoulos, G.; Lancaster, T. M.; Bracht, T.; Ihssen, N.; Maio, G. R.; Linden, D. E. J.

    2016-01-01

    Human values are abstract ideals that motivate behavior. The motivational nature of human values raises the possibility that they might be underpinned by brain structures that are particularly involved in motivated behavior and reward processing. We hypothesized that variation in subcortical hubs of the reward system and their main connecting pathway, the superolateral medial forebrain bundle (slMFB) is associated with individual value orientation. We conducted Pearson's correlation between the scores of 10 human values and the volumes of 14 subcortical structures and microstructural properties of the medial forebrain bundle in a sample of 87 participants, correcting for multiple comparisons (i.e.,190). We found a positive association between the value that people attach to hedonism and the volume of the left globus pallidus (GP).We then tested whether microstructural parameters (i.e., fractional anisotropy and myelin volume fraction) of the slMFB, which connects with the GP, are also associated to hedonism and found a significant, albeit in an uncorrected level, positive association between the myelin volume fraction within the left slMFB and hedonism scores. This is the first study to elucidate the relationship between the importance people attach to the human value of hedonism and structural variation in reward-related subcortical brain regions. PMID:27473322

  17. Idea Hubs as Nexus of Collective Creativity in Digital Innovation

    DEFF Research Database (Denmark)

    Ciriello, Raffaele; Richter, Alexander

    2015-01-01

    on instances of idea hubs in two multinational European software companies, where we conducted a case study over a two-year period, and collected data in form of interviews, digital documents, and participant observations. In doing so, we identify a set of social networking practices in which idea hubs serve......Digital innovation radically transforms the nature of corporate innovation practices, implying a growing need for deeper understanding its origins and outcomes. In this paper, we conceptualize the focal points of social networking in digital innovation as idea hubs. We focus our analysis...... as nexus of collective creativity and subject these to a critical dialectical examination. We discuss three influencing factors of idea hub choice, namely material infrastructure, innovation process phase, and personal characteristics. These explain why in a corporate environment, despite a variety...

  18. 14 CFR 398.2 - Number and designation of hubs.

    Science.gov (United States)

    2010-01-01

    ... origin and designation data; (iv) The distance of candidate hubs from the eligible place; and (v) The... may instead require that service from an eligible place be provided to a nearby focal point...

  19. Model of Controlling the Hubs in P2P Networks

    Directory of Open Access Journals (Sweden)

    Yuhua Liu

    2009-06-01

    Full Text Available Research into the hubs in Peer-to-Peer (P2P networks, and present a new method to avoid generating the hubs in the networks by controlling the logical topology structure of P2P networks. We firstly introduce the controlling ideas about hierarchizing the hubs. Then, we disclose and interpret the controlling model, and give out the concrete method to carry it out. Finally, we validate our controlling model via simulations and the simulation results demonstrate that our work is effective to control the hubs in P2P networks. Thus, this model can improve the network competence to defend against coordinated attacks, promote the network robustness, and ensure the network would develop continually and healthily.

  20. Establishing a Global Halal Hub: In-Depth Interviews

    Directory of Open Access Journals (Sweden)

    Mahdi Borzooei

    2013-10-01

    Full Text Available The purpose of this study is to explore the requirements needed for a country to establish itself as a global Halal hub. In this regard, this exploratory research paper uses a semi-structured in-depth interview to obtain the perceptions of Halal experts about the requirements for establishing a Halal hub. The results of the study indicate that human capital, media, research and development, events, country’s capability, public and governmental support, marketing strategy, and infrastructure comprise the vital requirements. Furthermore, from the perceptions of the experts, public and governmental support, marketing strategy, and human capital are the three most important requirements. Since this paper is an exploratory study, it provides some insights of the three experts on the establishing of a Halal hub. In addition, a quantitative study is an appropriate approach to implement the findings of this study empirically and to determine the effective components to establish a Halal hub in those countries that desire it. A practical implication of this study is the opening of a new window for any country that aspires to be a Halal hub. In this matter, this paper presents the key considerations in establishing a Halal hub for Halal certification bodies, companies and marketers involved in the Halal business. Moreover, this research attempts to influence the perceptions and attitudes of people of the country on the desirability of becoming a Halal hub, followed by a discussion on the development of a national brand. When the contribution of its people is high, a country stands the best chance of achieving its goal. Finally, this study is one of the first to seek the perceptions of experts about vital requirements that a country should pay more attention to if it wishes to establish a global Halal hub.

  1. A Hub Matrix Theory and Applications to Wireless Communications

    Directory of Open Access Journals (Sweden)

    Kung HT

    2007-01-01

    Full Text Available This paper considers communications and network systems whose properties are characterized by the gaps of the leading eigenvalues of for a matrix . It is shown that a sufficient and necessary condition for a large eigen-gap is that is a "hub" matrix in the sense that it has dominant columns. Some applications of this hub theory in multiple-input and multiple-output (MIMO wireless systems are presented.

  2. Why do European companies have Innovation Hubs in Silicon Valley

    DEFF Research Database (Denmark)

    Berger, Andreas; Brem, Alexander

    2017-01-01

    Innovation hubs are gaining high attention in recent years, especially from European companies. Silicon Valley has been deemed as one of the most attractive and successful environments for establishing innovation hubs. This article highlights examples of companies from Europe that made the step t...... to California—namely, Volkswagen, Swisscom, BMW, Axel Springer, Munich Re, and Innogy SE (RWE Group). Based on these companies’ experiences, recommendations are given on how companies might approach a setup in Silicon Valley for long-term success....

  3. DIGITAL VIDEO BROADCAST RETURN CHANNEL VIA SATELLITE (DVB-RCS HUB FOR SATELLITE BASED E-LEARNING

    Directory of Open Access Journals (Sweden)

    N.G.Vasantha Kumar

    2011-02-01

    Full Text Available This paper discusses in-house designed and developed scale-down DVB-RCS hub along with the performance of the realized hub. This development is intended to support the Satellite Based e-Learning initiative in India. The scale-down DVB-RCS HUB is implemented around a single PC with other subsystems making it very cost effective and unique of its kind. This realization will drastically reduce the total cost of Satellite based Education Networks as very low cost commercially available Satellite Interactive Terminals (SITs complying to open standard could be used at remote locations. The system is successfully tested to work with a commercial SIT using a GEO satellite EDUSAT which is especially dedicated for satellite based e-Learning. The internal detail of the DVB-RCS Forward and Return Link Organization and how it manages the Satellite Interactive Terminals access to the satellite channel using MF-TDMA approach has been described.

  4. Replenishment policy and inventory optimization for supply-hub with liability period consideration

    Institute of Scientific and Technical Information of China (English)

    李果; 黄焜; 姚琦; 马士华

    2013-01-01

    A replenishment decision-making model for supply-hub is firstly established from the angle of supplier, and optimal replenishment decision of the supplier is analyzed. Then, inventory optimization model for supply-hub is formulated from the angle of the manufacturer, and the optimization algorithm for obtaining optimal inventory levels is given. The result shows that liability period decides the share of the inventory cost between two sides in supply chain. With the increase of liability period, the service level has been quickly reduced even though the manufacturer’s cost has been cut down by transferring the inventory cost to the supplier. As to the safety inventory, if the lower bound of components safety inventory increases, the supplier’s cost will rise up more slowly than the liability period does, while the service levels increases as the safety inventory’s lower bound is raised.

  5. Concerted perturbation observed in a hub network in Alzheimer's disease.

    Directory of Open Access Journals (Sweden)

    Dapeng Liang

    Full Text Available Alzheimer's disease (AD is a progressive neurodegenerative disease involving the alteration of gene expression at the whole genome level. Genome-wide transcriptional profiling of AD has been conducted by many groups on several relevant brain regions. However, identifying the most critical dys-regulated genes has been challenging. In this work, we addressed this issue by deriving critical genes from perturbed subnetworks. Using a recent microarray dataset on six brain regions, we applied a heaviest induced subgraph algorithm with a modular scoring function to reveal the significantly perturbed subnetwork in each brain region. These perturbed subnetworks were found to be significantly overlapped with each other. Furthermore, the hub genes from these perturbed subnetworks formed a connected hub network consisting of 136 genes. Comparison between AD and several related diseases demonstrated that the hub network was robustly and specifically perturbed in AD. In addition, strong correlation between the expression level of these hub genes and indicators of AD severity suggested that this hub network can partially reflect AD progression. More importantly, this hub network reflected the adaptation of neurons to the AD-specific microenvironment through a variety of adjustments, including reduction of neuronal and synaptic activities and alteration of survival signaling. Therefore, it is potentially useful for the development of biomarkers and network medicine for AD.

  6. Identification of promising Twin Hub networks: Report of Work Package 1 of the Intermodal rail freight Twin hub Network Northwest Europe - project (final report)

    NARCIS (Netherlands)

    Kreutzberger, E.D.; Konings, J.W.; Meijer, S.; Witteveen, C.; Meijers, B.M.; Pekin, E.; Macharis, C.; Kiel, J.; Kawabata, Y.; Vos, W.

    2014-01-01

    This report is the first deliverable of the project Intermodal Rail Freight Twin Hub Network Northwest Europe. We call its subject Twin hub network and the organisational entity to carry out the actions the Twin hub project. The project is funded by INTERREG NWE (programme IVb). Its work started in

  7. Characteristics of steady vibration in a rotating hub-beam system

    Science.gov (United States)

    Zhao, Zhen; Liu, Caishan; Ma, Wei

    2016-02-01

    A rotating beam features a puzzling character in which its frequencies and modal shapes may vary with the hub's inertia and its rotating speed. To highlight the essential nature behind the vibration phenomena, we analyze the steady vibration of a rotating Euler-Bernoulli beam with a quasi-steady-state stretch. Newton's law is used to derive the equations governing the beam's elastic motion and the hub's rotation. A combination of these equations results in a nonlinear partial differential equation (PDE) that fully reflects the mutual interaction between the two kinds of motion. Via the Fourier series expansion within a finite interval of time, we reduce the PDE into an infinite system of a nonlinear ordinary differential equation (ODE) in spatial domain. We further nondimensionalize the ODE and discretize it via a difference method. The frequencies and modal shapes of a general rotating beam are then determined numerically. For a low-speed beam where the ignorance of geometric stiffening is feasible, the beam's vibration characteristics are solved analytically. We validate our numerical method and the analytical solutions by comparing with either the past experiments or the past numerical findings reported in existing literature. Finally, systematic simulations are performed to demonstrate how the beam's eigenfrequencies vary with the hub's inertia and rotating speed.

  8. Why Do Hubs Tend to Be Essential in Protein Networks?

    Directory of Open Access Journals (Sweden)

    2006-06-01

    Full Text Available The protein-protein interaction (PPI network has a small number of highly connected protein nodes (known as hubs and many poorly connected nodes. Genome-wide studies show that deletion of a hub protein is more likely to be lethal than deletion of a non-hub protein, a phenomenon known as the centrality-lethality rule. This rule is widely believed to reflect the special importance of hubs in organizing the network, which in turn suggests the biological significance of network architectures, a key notion of systems biology. Despite the popularity of this explanation, the underlying cause of the centrality-lethality rule has never been critically examined. We here propose the concept of essential PPIs, which are PPIs that are indispensable for the survival or reproduction of an organism. Our network analysis suggests that the centrality-lethality rule is unrelated to the network architecture, but is explained by the simple fact that hubs have large numbers of PPIs, therefore high probabilities of engaging in essential PPIs. We estimate that ~ 3% of PPIs are essential in the yeast, accounting for ~ 43% of essential genes. As expected, essential PPIs are evolutionarily more conserved than nonessential PPIs. Considering the role of essential PPIs in determining gene essentiality, we find the yeast PPI network functionally more robust than random networks, yet far less robust than the potential optimum. These and other findings provide new perspectives on the biological relevance of network structure and robustness.

  9. Why do hubs tend to be essential in protein networks?

    Directory of Open Access Journals (Sweden)

    Xionglei He

    2006-06-01

    Full Text Available The protein-protein interaction (PPI network has a small number of highly connected protein nodes (known as hubs and many poorly connected nodes. Genome-wide studies show that deletion of a hub protein is more likely to be lethal than deletion of a non-hub protein, a phenomenon known as the centrality-lethality rule. This rule is widely believed to reflect the special importance of hubs in organizing the network, which in turn suggests the biological significance of network architectures, a key notion of systems biology. Despite the popularity of this explanation, the underlying cause of the centrality-lethality rule has never been critically examined. We here propose the concept of essential PPIs, which are PPIs that are indispensable for the survival or reproduction of an organism. Our network analysis suggests that the centrality-lethality rule is unrelated to the network architecture, but is explained by the simple fact that hubs have large numbers of PPIs, therefore high probabilities of engaging in essential PPIs. We estimate that approximately 3% of PPIs are essential in the yeast, accounting for approximately 43% of essential genes. As expected, essential PPIs are evolutionarily more conserved than nonessential PPIs. Considering the role of essential PPIs in determining gene essentiality, we find the yeast PPI network functionally more robust than random networks, yet far less robust than the potential optimum. These and other findings provide new perspectives on the biological relevance of network structure and robustness.

  10. 春天%Spring

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ Days get longer and warmer in the spring. There are new leaves on the trees. Flowers begin to grow. Spring rain makes the grass green and helps the plants grow. Nature wears new clothes in many colors red, yellow, blue, white and purple. Spring is the time of new life. I love spring.

  11. New approaches to the marine transport hub competitive growth

    Directory of Open Access Journals (Sweden)

    M. V. Botnaryuk

    2010-12-01

    Full Text Available The issues of marine transport hub competitive growth in the context of new economic conditions are considered in the paper. Analyzing the present tools of the transport hub competitive growth, the author emphasizes their production-logistics orientation. However, when rendering services to cargo and ship owners, members of the MTH establish official (contractual and informal relationship and exchange information on a permanent basis. The research into the nature of such a relationship brought the author to the conclusion that generation and further development of the partnership is a basis for new ways of the transport hub competitive growth. Considering the MTH as an institution, the author suggests that a general marketing information system intended for improvement of the services rendered, which will undeniably enhance competitive advantage.

  12. An environmental transfer hub for multimodal atom probe tomography.

    Science.gov (United States)

    Perea, Daniel E; Gerstl, Stephan S A; Chin, Jackson; Hirschi, Blake; Evans, James E

    2017-01-01

    Environmental control during transfer between instruments is required for samples sensitive to air or thermal exposure to prevent morphological or chemical changes prior to analysis. Atom probe tomography is a rapidly expanding technique for three-dimensional structural and chemical analysis, but commercial instruments remain limited to loading specimens under ambient conditions. In this study, we describe a multifunctional environmental transfer hub allowing controlled cryogenic or room-temperature transfer of specimens under atmospheric or vacuum pressure conditions between an atom probe and other instruments or reaction chambers. The utility of the environmental transfer hub is demonstrated through the acquisition of previously unavailable mass spectral analysis of an intact organic molecule made possible via controlled cryogenic transfer into the atom probe using the hub. The ability to prepare and transfer specimens in precise environments promises a means to access new science across many disciplines from untainted samples and allow downstream time-resolved in situ atom probe studies.

  13. Microfluidic hubs, systems, and methods for interface fluidic modules

    Energy Technology Data Exchange (ETDEWEB)

    Bartsch, Michael S; Claudnic, Mark R; Kim, Hanyoup; Patel, Kamlesh D; Renzi, Ronald F; Van De Vreugde, James L

    2015-01-27

    Embodiments of microfluidic hubs and systems are described that may be used to connect fluidic modules. A space between surfaces may be set by fixtures described herein. In some examples a fixture may set substrate-to-substrate spacing based on a distance between registration surfaces on which the respective substrates rest. Fluidic interfaces are described, including examples where fluid conduits (e.g. capillaries) extend into the fixture to the space between surfaces. Droplets of fluid may be introduced to and/or removed from microfluidic hubs described herein, and fluid actuators may be used to move droplets within the space between surfaces. Continuous flow modules may be integrated with the hubs in some examples.

  14. Mapping multiplex hubs in human functional brain networks

    Directory of Open Access Journals (Sweden)

    Alex Arenas

    2016-07-01

    Full Text Available Typical brain networks consist of many peripheral regions and a few highly centralones, i.e. hubs, playing key functional roles in cerebral inter-regional interactions. Studieshave shown that networks, obtained from the analysis of specific frequency components ofbrain activity, present peculiar architectures with unique profiles of region centrality. However,the identification of hubs in networks built from different frequency bands simultaneouslyis still a challenging problem, remaining largely unexplored. Here we identify eachfrequency component with one layer of a multiplex network and face this challenge by exploitingthe recent advances in the analysis of multiplex topologies. First, we show that eachfrequency band carries unique topological information, fundamental to accurately modelbrain functional networks. We then demonstrate that hubs in the multiplex network, in generaldifferent from those ones obtained after discarding or aggregating the measured signalsas usual, provide a more accurate map of brain’s most important functional regions, allowingto distinguish between healthy and schizophrenic populations better than conventionalnetwork approaches.

  15. A new method for improved hub height mean wind speed estimates using short-term hub height data

    Energy Technology Data Exchange (ETDEWEB)

    Lackner, Matthew A.; Rogers, Anthony L.; Manwell, James F.; McGowan, Jon G. [Wind Energy Center, Department of Mechanical and Industrial Engineering, University of Massachusetts Amherst, 160 Governors Dr., Amherst, MA 01003 (United States)

    2010-10-15

    The estimation of the wind resource at the hub height of a wind turbine is one of the primary goals of site assessment. Because the measurement heights of meteorological towers (met towers) are typically significantly lower than turbine hub heights, a shear model is generally needed to extrapolate the measured wind resource at the lower measurement height to the hub height of the turbine. This paper presents methods for improving the estimate of the hub height wind resource from met tower data through the use of ground-based remote sensing devices. The methods leverage the two major advantages of these devices: their portability and their ability to measure at the wind turbine hub height. Specifically, the methods rely on augmenting the one year of met tower measurements with short-term measurements from a ground-based remote sensing device. The results indicate that the methods presented are capable of producing substantial improvements in the accuracy and uncertainty of shear extrapolation predictions. The results suggest that the typical site assessment process can be reevaluated, and alternative strategies that utilize ground-based remote sensing devices can be incorporated to significantly improve the process. (author)

  16. Robust Energy Hub Management Using Information Gap Decision Theory

    DEFF Research Database (Denmark)

    Javadi, Mohammad Sadegh; Anvari-Moghaddam, Amjad; Guerrero, Josep M.

    2017-01-01

    tools in order to deal with uncertainties and to provide reliable operating conditions. On a broader scale, an energy hub includes diverse energy sources for supplying both electrical load and heating/cooling demands with stochastic behaviors. Therefore, this paper utilizes the Information Decision Gap...... Theory (IGDT) to tackle this uncertainty as an efficient robust optimization tool with low complexity to ensure the optimal operation of the system according to the priorities of the decision maker entity. The proposed optimization framework is also implemented on a benchmark energy hub which includes...

  17. Variable volume combustor with center hub fuel staging

    Energy Technology Data Exchange (ETDEWEB)

    Ostebee, Heath Michael; McConnaughhay, Johnie Franklin; Stewart, Jason Thurman; Keener, Christopher Paul

    2016-08-23

    The present application and the resultant patent provide a combustor for use with a gas turbine engine. The combustor may include a number of micro-mixer fuel nozzles and a fuel injection system for providing a flow of fuel to the micro-mixer fuel nozzles. The fuel injection system may include a center hub for providing the flow of fuel therethrough. The center hub may include a first supply circuit for a first micro-mixer fuel nozzle and a second supply circuit for a second micro-mixer fuel nozzle.

  18. Bus coordination holding control for transit hubs under APTS

    Institute of Scientific and Technical Information of China (English)

    TENG Jing; ZHAO Ming

    2009-01-01

    To increase the passenger transferring efficiency, the bus coordination holding control for transit hubs,hich is as an important dynamic dispatching method for improving the service level of transit hubs, was studied in the framework of bus coordination dispatching mode. Firstly, the bus coordination holding control flow was studied based on Advanced Public Transportation Systems (APTS) environment. Then a control model was presented to optimize the bus vehicle holding time, and a genetic algorithm was designed as the solving method. In the end, an example was given to illustrate the effectiveness of the control strategy and the algorithm.

  19. Thermal springs of Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Breckenridge, R.M.; Hinckley, B.S.

    1978-01-01

    This bulletin attempts, first, to provide a comprehensive inventory of the thermal springs of Wyoming; second, to explore the geologic and hydrologic factors producing these springs; and, third, to analyze the springs collectively as an indicator of the geothermal resources of the state. A general discussion of the state's geology and the mechanisms of thermal spring production, along with a brief comparison of Wyoming's springs with worldwide thermal features are included. A discussion of geothermal energy resources, a guide for visitors, and an analysis of the flora of Wyoming's springs follow the spring inventory. The listing and analysis of Wyoming's thermal springs are arranged alphabetically by county. Tabulated data are given on elevation, ownership, access, water temperature, and flow rate. Each spring system is described and its history, general characteristics and uses, geology, hydrology, and chemistry are discussed. (MHR)

  20. Instant Spring Tool Suite

    CERN Document Server

    Chiang, Geoff

    2013-01-01

    Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. A tutorial guide that walks you through how to use the features of Spring Tool Suite using well defined sections for the different parts of Spring.Instant Spring Tool Suite is for novice to intermediate Java developers looking to get a head-start in enterprise application development using Spring Tool Suite and the Spring framework. If you are looking for a guide for effective application development using Spring Tool Suite, then this book is for you.

  1. Portable Desktop Apps with GitHub Electron

    CERN Document Server

    CERN. Geneva

    2016-01-01

    Wouldn't it be nice if you could develop applications that work everywhere, regardless of Operating System or Platform? Even better, what if you could employ the same front-end technologies you use for your web/mobile apps? Meet GitHub Electron.

  2. The evolution of the MasAgro hubs

    NARCIS (Netherlands)

    Camacho-Villa, Tania Carolina; Almekinders, Conny; Hellin, Jon; Martinez-Cruz, Tania Eulalia; Rendon-Medel, Roberto; Guevara-Hernández, Francisco; Beuchelt, Tina D.; Govaerts, Bram

    2016-01-01

    Purpose: Little is known about effective ways to operationalize agricultural innovation processes. We use the MasAgro program in Mexico (which aims to increase maize and wheat productivity, profitability and sustainability), and the experiences of middle level ‘hub managers’, to understand how innov

  3. Native Avatars, Online Hubs, and Urban Indian Literature

    Science.gov (United States)

    Estrada, Gabriel S.

    2011-01-01

    Teaching American Indian literature with online resources can help diverse urban Indian and multicultural students connect with American Indian cultures, histories, and Nations. This online-enriched pedagogy adopts Susan Lobo's sense of the city as an "urban hub," or activist community center, an urban area linked to reservations in which Native…

  4. Fatigue Analysis of Casted Hubs in Wind Turbines

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Nielsen, Søren R.K.; Sørensen, Steffen

    2002-01-01

    The hub of a wind turbine rotor is excited by time-varying forces and moments from the blades caused by extemal dynamic loads such as wind loading and aeroelastic effects. The paper describes how reliability-based fatigue analysis can be made based on SN-curves and how reliability-based inspectio...

  5. Functional Connectivity Hubs and Networks in the Awake Marmoset Brain

    Directory of Open Access Journals (Sweden)

    Annabelle Marie Belcher

    2016-03-01

    Full Text Available In combination with advances in analytical methods, resting-state fMRI is allowing unprecedented access to achieve a better understanding of the network organization of the brain. Increasing evidence suggests that this architecture may incorporate highly functionally connected nodes, or hubs, and we have recently proposed local functional connectivity density (lFCD mapping to identify highly-connected nodes in the human brain. Here we imaged awake nonhuman primates to test whether, like the human brain, the marmoset brain contains functional connectivity hubs. Ten adult common marmosets (Callithrix jacchus were acclimated to mild, comfortable restraint using individualized helmets. Following restraint training, resting BOLD data were acquired during eight consecutive 10 min scans for each subject. lFCD revealed prominent cortical and subcortical hubs of connectivity across the marmoset brain; specifically, in primary and secondary visual cortices (V1/V2, higher-order visual association areas (A19M/V6[DM], posterior parietal and posterior cingulate areas (PGM and A23b/A31, thalamus, dorsal and ventral striatal areas (caudate, putamen, lateral septal nucleus, and anterior cingulate cortex (A24a. lFCD hubs were highly connected to widespread areas of the brain, and further revealed significant network-network interactions. These data provide a baseline platform for future investigations in a nonhuman primate model of the brain’s network topology.

  6. The evolution of the MasAgro hubs

    NARCIS (Netherlands)

    Camacho-Villa, Tania Carolina; Almekinders, Conny; Hellin, Jon; Martinez-Cruz, Tania Eulalia; Rendon-Medel, Roberto; Guevara-Hernández, Francisco; Beuchelt, Tina D.; Govaerts, Bram

    2016-01-01

    Purpose: Little is known about effective ways to operationalize agricultural innovation processes. We use the MasAgro program in Mexico (which aims to increase maize and wheat productivity, profitability and sustainability), and the experiences of middle level ‘hub managers’, to understand how

  7. DAVINC3I: moving towards responsive hub network designs

    NARCIS (Netherlands)

    Ossevoort, R.; Keizer, de M.; Vorst, van der J.G.A.J.; Wenink, E.

    2013-01-01

    The Dutch floricultural sector is generally appreciated for its world leadership; the Netherlands is the flower trading hub for the European market. There are two trends affecting this position. First, virtualisation makes trade flows relatively footloose and flexible. Moreover, it enables the use o

  8. Discovering Authorities and Hubs in Different Topological Web Graph Structures.

    Science.gov (United States)

    Meghabghab, George

    2002-01-01

    Discussion of citation analysis on the Web considers Web hyperlinks as a source to analyze citations. Topics include basic graph theory applied to Web pages, including matrices, linear algebra, and Web topology; and hubs and authorities, including a search technique called HITS (Hyperlink Induced Topic Search). (Author/LRW)

  9. DAVINC3I: moving towards responsive hub network designs

    NARCIS (Netherlands)

    Ossevoort, R.; Keizer, de M.; Vorst, van der J.G.A.J.; Wenink, E.

    2013-01-01

    The Dutch floricultural sector is generally appreciated for its world leadership; the Netherlands is the flower trading hub for the European market. There are two trends affecting this position. First, virtualisation makes trade flows relatively footloose and flexible. Moreover, it enables the use o

  10. Interaction of railway and marine transport (Murmansk Transport Hub

    Directory of Open Access Journals (Sweden)

    Sokolov A.A.

    2015-03-01

    Full Text Available The classification of problems of interaction between water (marine and railway transport on the example of the Murmansk Transport Hub has been presented; some prospects for the development of technology for interaction with the logistics of transportation of general cargo in the Murmansk Commercial Seaport, Murmansk Marine Fishing Port, and oil terminals of the Kola Bay have been shown

  11. The Urban Food Hubs Solution: Building Capacity in Urban Communities

    Science.gov (United States)

    O'Hara, Sabine

    2017-01-01

    Access to affordable fresh food is an ongoing challenge for underserved urban neighborhoods across the United States. Several are designated food deserts with no access to a full-service grocery store within a one-mile radius. The Urban Food Hubs of the College of Agriculture, Urban Sustainability, and Environmental Sciences (CAUSES) of the…

  12. Joystick With Cable Springs Offers Better Feel

    Science.gov (United States)

    Kerley, James; Ecklund, Wayne

    1992-01-01

    Improved joystick allows motion in 6 degrees of freedom, biased toward central position and orientation by 16 segments of cable serving as springs. Improvement in feel and control results from nonlinear compliance of cable-spring assembly. Nonlinear variations accommodate natural reactions of hand and brain. Operator functions as part of feedback control loop. More comfortable, increases ability to exert control and reduces fatigue.

  13. Water Treatment Technology - Springs.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on springs provides instructional materials for two competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on spring basin construction and spring protection. For each competency, student…

  14. Derivation of the reduced reaction mechanisms of ozone depletion events in the Arctic spring by using concentration sensitivity analysis and principal component analysis

    Science.gov (United States)

    Cao, Le; Wang, Chenggang; Mao, Mao; Grosshans, Holger; Cao, Nianwen

    2016-12-01

    The ozone depletion events (ODEs) in the springtime Arctic have been investigated since the 1980s. It is found that the depletion of ozone is highly associated with an auto-catalytic reaction cycle, which involves mostly the bromine-containing compounds. Moreover, bromide stored in various substrates in the Arctic such as the underlying surface covered by ice and snow can be also activated by the absorbed HOBr. Subsequently, this leads to an explosive increase of the bromine amount in the troposphere, which is called the "bromine explosion mechanism". In the present study, a reaction scheme representing the chemistry of ozone depletion and halogen release is processed with two different mechanism reduction approaches, namely, the concentration sensitivity analysis and the principal component analysis. In the concentration sensitivity analysis, the interdependence of the mixing ratios of ozone and principal bromine species on the rate of each reaction in the ODE mechanism is identified. Furthermore, the most influential reactions in different time periods of ODEs are also revealed. By removing 11 reactions with the maximum absolute values of sensitivities lower than 10 %, a reduced reaction mechanism of ODEs is derived. The onsets of each time period of ODEs in simulations using the original reaction mechanism and the reduced reaction mechanism are identical while the maximum deviation of the mixing ratio of principal bromine species between different mechanisms is found to be less than 1 %. By performing the principal component analysis on an array of the sensitivity matrices, the dependence of a particular species concentration on a combination of the reaction rates in the mechanism is revealed. Redundant reactions are indicated by principal components corresponding to small eigenvalues and insignificant elements in principal components with large eigenvalues. Through this investigation, aside from the 11 reactions identified as unimportant in the concentration

  15. Implementation of preform-LCM process chain for the manufacturing of rotor hub shaft combination[Liquid Composite Molding

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Concept of a waste-free preform-liquid composite molding (LCM) process chain for the production of composite parts is developed and implemented for an integral lightweight construction with improvement in their ecological and economical properties. This also enables new applications for the composite materials. A prototype of rotor hub and shaft combination (HSC) of a horizontal axis wind turbine was designed and manufactured using integral components and composite materials. The aim of this study was to reduce the costs and weight in comparison with individual parts of standard metallic hub and shaft. This approach in the later stage facilitates to reduce the system costs of wind turbines. In this paper, the basic concept of the HSC component and the preform-LCM process chain used for its manufacturing is presented. Major advantageous features of preform and LCM technology for the large structures are described in detail. (au)

  16. Pro Spring Batch

    CERN Document Server

    Minella, Michael T

    2011-01-01

    Since its release, Spring Framework has transformed virtually every aspect of Java development including web applications, security, aspect-oriented programming, persistence, and messaging. Spring Batch, one of its newer additions, now brings the same familiar Spring idioms to batch processing. Spring Batch addresses the needs of any batch process, from the complex calculations performed in the biggest financial institutions to simple data migrations that occur with many software development projects. Pro Spring Batch is intended to answer three questions: *What? What is batch processing? What

  17. Lazy Updating of hubs can enable more realistic models by speeding up stochastic simulations

    Energy Technology Data Exchange (ETDEWEB)

    Ehlert, Kurt; Loewe, Laurence, E-mail: loewe@wisc.edu [Laboratory of Genetics, University of Wisconsin-Madison, Madison, Wisconsin 53706 (United States); Wisconsin Institute for Discovery, University of Wisconsin-Madison, Madison, Wisconsin 53715 (United States)

    2014-11-28

    To respect the nature of discrete parts in a system, stochastic simulation algorithms (SSAs) must update for each action (i) all part counts and (ii) each action's probability of occurring next and its timing. This makes it expensive to simulate biological networks with well-connected “hubs” such as ATP that affect many actions. Temperature and volume also affect many actions and may be changed significantly in small steps by the network itself during fever and cell growth, respectively. Such trends matter for evolutionary questions, as cell volume determines doubling times and fever may affect survival, both key traits for biological evolution. Yet simulations often ignore such trends and assume constant environments to avoid many costly probability updates. Such computational convenience precludes analyses of important aspects of evolution. Here we present “Lazy Updating,” an add-on for SSAs designed to reduce the cost of simulating hubs. When a hub changes, Lazy Updating postpones all probability updates for reactions depending on this hub, until a threshold is crossed. Speedup is substantial if most computing time is spent on such updates. We implemented Lazy Updating for the Sorting Direct Method and it is easily integrated into other SSAs such as Gillespie's Direct Method or the Next Reaction Method. Testing on several toy models and a cellular metabolism model showed >10× faster simulations for its use-cases—with a small loss of accuracy. Thus we see Lazy Updating as a valuable tool for some special but important simulation problems that are difficult to address efficiently otherwise.

  18. Design and Analysis on Vibration Reduction System in Electric Vehicles with Hub Motor%电动车辆轮毂电机减振系统设计与分析

    Institute of Scientific and Technical Information of China (English)

    魏亚鹏; 吴胜涛; 马英; 秦鹏鹏; 李浩冉; 张汉召

    2015-01-01

    为消除轮毂电机造成电动汽车非簧载质量增加而使车辆平顺性和安全性降低的影响,根据质量转移的方法,在电动轮内安装弹簧阻尼减振系统将轮毂电机质量变成吸振器,建立11自由度电动轮车辆整车动力学模型,并对模型进行仿真分析。结果表明,轮毂电机减振系统在满足轮毂电机垂向跳动要求的基础上,可以消除轮毂电机刚性与车轮连接给车辆带来的垂向负效应问题。%In order to eliminate the reduction effect of vehicle ride comfort and safety of the hub motor electric vehi-cle caused by the under spring mass increased, according to the method of mass transfer, the authors mount the spring damping vibration system in the electric wheels to make the hub motor mass the vibration absorber, establish dynamics model of 11 freedom degree vehicle with hub motor, and simulate the model. The results show that the damping system of the hub motor on the basis of meeting the requirements of hub motor vertical jump can eliminate the negative vertical effect of the vehicle because of the hub motor rigidly connected to the wheel.

  19. Revisiting date and party hubs: novel approaches to role assignment in protein interaction networks.

    Directory of Open Access Journals (Sweden)

    Sumeet Agarwal

    2010-06-01

    Full Text Available The idea of "date" and "party" hubs has been influential in the study of protein-protein interaction networks. Date hubs display low co-expression with their partners, whilst party hubs have high co-expression. It was proposed that party hubs are local coordinators whereas date hubs are global connectors. Here, we show that the reported importance of date hubs to network connectivity can in fact be attributed to a tiny subset of them. Crucially, these few, extremely central, hubs do not display particularly low expression correlation, undermining the idea of a link between this quantity and hub function. The date/party distinction was originally motivated by an approximately bimodal distribution of hub co-expression; we show that this feature is not always robust to methodological changes. Additionally, topological properties of hubs do not in general correlate with co-expression. However, we find significant correlations between interaction centrality and the functional similarity of the interacting proteins. We suggest that thinking in terms of a date/party dichotomy for hubs in protein interaction networks is not meaningful, and it might be more useful to conceive of roles for protein-protein interactions rather than for individual proteins.

  20. An environmental transfer hub for multimodal atom probe tomography

    Energy Technology Data Exchange (ETDEWEB)

    Perea, Daniel E.; Gerstl, Stephan S. A.; Chin, Jackson; Hirschi, Blake; Evans, James. E.

    2017-05-02

    Environmental control during transfer between instruments is required for specimens sensitive to air or thermal exposure to prevent morphological or chemical changes. Atom Probe Tomography is an expanding technique but commercial instruments remain limited to loading under ambient conditions. Here we describe a multifunctional environmental transfer hub allowing controlled cryogenic, atmospheric and vacuum transfer between an Atom Probe and other instruments containing separate chambers to allow downstream time-resolved in-situ studies.

  1. The new forging process of a wheel hub drop forging

    Directory of Open Access Journals (Sweden)

    A. Gontarz

    2006-08-01

    Full Text Available Purpose: The main purpose of the research was working out a new flashless forming process of wheel hubforging in three-slide forging press (TSFP. It was assumed that the new process would be more effective thanthe forging processes applied in typical forging machines.Design/methodology/approach: The designing of the new process was based on the simulation by finiteelement method with the assumption of 3D state of strain. Calculations were made mainly for the analysis of thematerial flow kinematics and the process loads parameters. Experimental research were also made determiningthe dependency of clamping load in the function of forming load. On the basis of the analysis, the formingprocess of a wheel hub drop forging on the TSFP was worked out.Findings: The results of research confirmed the possibility of flashless forming process of wheel hub forgingin TSFP with axial cavities. The main parameters limiting the forming processes of wheel hub forgings are:permissible upsetting ratio and reciprocal relation of forming and clamping forces.Research limitations/implications: The further research within the range of determining force parameters fordifferent types of material and schemata of forming in TSFP were considered as purposeful. The works dealingwith analysis of forming processes of different types of products in order to classify drop forgings possible toform in this press will be examined.Practical implications: The comparison of the new forming process with the forging process on hammershowed majority of advantages which include: decrease of time and energy, decrease of drop forging weight andmachining, decrease of material consumption.Originality/value: The new process of wheel hub forging forming with axial cavities was worked out. Theparameters important during designing of forming processes in TSFP were provided. The relations betweenforces of forming tools were also determined.

  2. The home hemodialysis hub: physical infrastructure and integrated governance structure.

    Science.gov (United States)

    Marshall, Mark R; Young, Bessie A; Fox, Sally J; Cleland, Calli J; Walker, Robert J; Masakane, Ikuto; Herold, Aaron M

    2015-04-01

    An effective home hemodialysis program critically depends on adequate hub facilities and support functions and on transparent and accountable organizational processes. The likelihood of optimal service delivery and patient care will be enhanced by fit-for-purpose facilities and implementation of a well-considered governance structure. In this article, we describe the required accommodation and infrastructure for a home hemodialysis program and a generic organizational structure that will support both patient-facing clinical activities and business processes.

  3. Robust design of a polygonal shaft-hub coupling

    Directory of Open Access Journals (Sweden)

    R. Citarella

    2015-10-01

    Full Text Available In this work, the Taguchi method is applied for the optimal choice of design parameter values for a polygonal shaft-hub coupling. The objective is to maximize a performance function, minimizing, at the same time, its sensitivity to noises factors (robust design. The Design of Experiments (DoE is adopted to set up a plan of numerical experiments, whose different configurations are simulated using the Boundary Element Method (BEM

  4. Performance evaluation of interconnected logistics networks confronted to hub disruptions

    OpenAIRE

    2016-01-01

    International audience; This paper investigates performance of interconnected logistics networks confronted to disruptions at hub level. With traditional supply chain network design, companies define and optimize their own logistics networks, resulting in current logistics systems being a set of independent heterogeneous logistics networks. The concept of PI aims to integrate independent logistics networks into a global, open, interconnected system. Prior research has shown that the new organ...

  5. Looking east, looking west: Penang as a knowledge hub

    OpenAIRE

    Gerke, Solvay; Evers, Hans-Dieter

    2012-01-01

    Penang has always been a focal point, absorbing knowledge (and popular culture) from civilizations to the East and West. In modern Penang the pattern of cultural contacts has changed over time. Research institutes and universities in Penang cooperate with foreign partners to produce research papers and reports. Based on an analysis of joint research output, the changing international position of Penang as an emerging research hub will be analysed. The paper will show that international cooper...

  6. A Hub Matrix Theory and Applications to Wireless Communications

    Directory of Open Access Journals (Sweden)

    H. T. Kung

    2007-01-01

    Full Text Available This paper considers communications and network systems whose properties are characterized by the gaps of the leading eigenvalues of AHA for a matrix A. It is shown that a sufficient and necessary condition for a large eigen-gap is that A is a “hub” matrix in the sense that it has dominant columns. Some applications of this hub theory in multiple-input and multiple-output (MIMO wireless systems are presented.

  7. Logistics service sharing in supply hub in industrial park (SHIP)

    OpenAIRE

    Qiu, Xuan; 邱璇

    2013-01-01

    Industrial parks have played an indispensible role in boosting economic and industrial development. However, further development has been impeded by the shortage of land resources and by duplicate investments on common physical assets and services. This thesis proposes the concept of Supply Hub in Industrial Park (SHIP) as a public provider of warehousing and transportation services shared by manufacturing enterprises located within an industrial park. This research investigates four typic...

  8. Idea Exchange Music Hub Hits the Right Note in Community

    Directory of Open Access Journals (Sweden)

    Greg Bester

    2014-06-01

    Full Text Available The Cambridge Libraries and Galleries has made many changes over the last two years, rebranding as Idea Exchange and adding 3D printers, creative spaces and many on-site events. This article focuses on one of the organization’s newest innovations, the addition of a Music Hub, and the challenges of creating a space where members can learn and collaborate musically without disturbing those around them.

  9. Spring 5 & reactive streams

    CERN Document Server

    CERN. Geneva; Clozel, Brian

    2017-01-01

    Spring is a framework widely used by the world-wide Java community, and it is also extensively used at CERN. The accelerator control system is constituted of 10 million lines of Java code, spread across more than 1000 projects (jars) developed by 160 software engineers. Around half of this (all server-side Java code) is based on the Spring framework. Warning: the speakers will assume that people attending the seminar are familiar with Java and Spring’s basic concepts. Spring 5.0 and Spring Boot 2.0 updates (45 min) This talk will cover the big ticket items in the 5.0 release of Spring (including Kotlin support, @Nullable and JDK9) and provide an update on Spring Boot 2.0, which is scheduled for the end of the year. Reactive Spring (1h) Spring Framework 5.0 has been released - and it now supports reactive applications in the Spring ecosystem. During this presentation, we'll talk about the reactive foundations of Spring Framework with the Reactor project and the reactive streams specification. We'll al...

  10. ThermoTecSpring {sup registered}. High-strength lightweight spring as a contribution to CO{sub 2} reduction; ThermoTecSpring {sup registered}. Hochfeste Leichtbau-Feder als Beitrag zur CO{sub 2}-Reduzierung

    Energy Technology Data Exchange (ETDEWEB)

    Gross, Marcel [ThyssenKrupp Bilstein Suspension GmbH, Hagen-Hohenlimburg (Germany)

    2011-07-01

    By adapting the thermomechanical forming process to the requirements of coil spring manufacturing, ThyssenKrupp Bilstein Suspension has succeeded in changing the properties of the material to produce higher-strength springs. This clears the way for lighter springs with smaller wire diameters and shorter spring designs with the same level of performance. Compared with normal-strength suspension springs, the ThermoTecSpring {sup registered} technology permits weight savings of 15 to 20% per spring depending on application. The ThermoTecSpring {sup registered} therefore contributes to lowering fuel consumption and reducing CO{sub 2} emissions. (orig.)

  11. Matrix logistics indicators assessment of distributed transport hub

    Directory of Open Access Journals (Sweden)

    Igor Arefyev

    2014-06-01

    Full Text Available Background: The paper is devoted to the distributed transport hub substantiation and assessment. The paper  was an example of the technique and form an array of logistical factors as variables that determine this condition. Experience in organizing multimodal transport showed that the "bottleneck" of transport logistics are items of cargo handling ports, terminals, freight stations and warehouses. At the core of the solution of these problems is the problem of estimating the variables determine the Multi-purpose Hubs. The aim is to develop a method of forming the system of logistical multiplying factors determine the role of each of the types in the technologiacal process of distributed Multi-purpose Hubs. Methods: The assessment model for the formation of Distributed Transport Units  can be based on formal methods to predict the behavior of complex systems engineering complexes. Then one of the approaches to the solution of the problem may be the matrix method of technological factors. Results and conclusions: The proposed methodology of the selection and validation of logistic coefficients has the practical importance in the models development for assessing the condition and behavior of Distributed Transport.

  12. The coffee genome hub: a resource for coffee genomes.

    Science.gov (United States)

    Dereeper, Alexis; Bocs, Stéphanie; Rouard, Mathieu; Guignon, Valentin; Ravel, Sébastien; Tranchant-Dubreuil, Christine; Poncet, Valérie; Garsmeur, Olivier; Lashermes, Philippe; Droc, Gaëtan

    2015-01-01

    The whole genome sequence of Coffea canephora, the perennial diploid species known as Robusta, has been recently released. In the context of the C. canephora genome sequencing project and to support post-genomics efforts, we developed the Coffee Genome Hub (http://coffee-genome.org/), an integrative genome information system that allows centralized access to genomics and genetics data and analysis tools to facilitate translational and applied research in coffee. We provide the complete genome sequence of C. canephora along with gene structure, gene product information, metabolism, gene families, transcriptomics, syntenic blocks, genetic markers and genetic maps. The hub relies on generic software (e.g. GMOD tools) for easy querying, visualizing and downloading research data. It includes a Genome Browser enhanced by a Community Annotation System, enabling the improvement of automatic gene annotation through an annotation editor. In addition, the hub aims at developing interoperability among other existing South Green tools managing coffee data (phylogenomics resources, SNPs) and/or supporting data analyses with the Galaxy workflow manager. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

  13. Spider orientation and hub position in orb webs

    Science.gov (United States)

    Zschokke, Samuel; Nakata, Kensuke

    2010-01-01

    Orb-web building spiders (Araneae: Araneoidea, Uloboridae) can be considered as territorial central place foragers. In territorial central place foragers, the optimal foraging arena is circular, with the forager sitting in its centre. In orb webs, the spider’s orientation (head up or head down) whilst waiting for prey on the hub of its web and the downwards-upwards asymmetry of its running speeds are the probable causes for the observed deviation of the hub from the web’s centre. Here, we present an analytical model and a more refined simulation model to analyse the relationships amongst the spider’s running speeds, its orientation whilst waiting for prey and the vertical asymmetry of orb webs. The results of our models suggest that (a) waiting for prey head down is generally favourable because it allows the spider to reach the prey in its web on average quicker than spiders waiting head up, (b) the downwards-upwards running speed asymmetry, together with the head-down orientation of most spiders, are likely causes for the observed vertical asymmetry of orb webs, (c) waiting head up can be advantageous for spiders whose downwards-upwards running speed asymmetry is small and who experience high prey tumbling rates and (d) spiders waiting head up should place their hub lower than similar spiders waiting head down.

  14. Mapping Multiplex Hubs in Human Functional Brain Networks

    Science.gov (United States)

    De Domenico, Manlio; Sasai, Shuntaro; Arenas, Alex

    2016-01-01

    Typical brain networks consist of many peripheral regions and a few highly central ones, i.e., hubs, playing key functional roles in cerebral inter-regional interactions. Studies have shown that networks, obtained from the analysis of specific frequency components of brain activity, present peculiar architectures with unique profiles of region centrality. However, the identification of hubs in networks built from different frequency bands simultaneously is still a challenging problem, remaining largely unexplored. Here we identify each frequency component with one layer of a multiplex network and face this challenge by exploiting the recent advances in the analysis of multiplex topologies. First, we show that each frequency band carries unique topological information, fundamental to accurately model brain functional networks. We then demonstrate that hubs in the multiplex network, in general different from those ones obtained after discarding or aggregating the measured signals as usual, provide a more accurate map of brain's most important functional regions, allowing to distinguish between healthy and schizophrenic populations better than conventional network approaches. PMID:27471443

  15. EXPERIMENTAL INVESTIGATION & NUMERICAL ANALYSIS OF COMPOSITE LEAF SPRING

    Directory of Open Access Journals (Sweden)

    K. K. JADHAO,

    2011-06-01

    Full Text Available The Automobile Industry has shown keen interest for replacement of steel leaf spring with that of glass fiber composite leaf spring, since the composite material has high strength to weight ratio, good corrosion resistance and tailor-able properties. The objective of present study was to replace material for leaf spring. In present study the material selected was glass fiber reinforced plastic (GFRP and the polyester resin (NETPOL 1011 can be used which was more economical this will reduce total cost of composite leaf spring. A spring with constant width and thickness was fabricated by hand lay-up technique which was very simple and economical. The experiments were conducted on UTM and numerical analysis was done via (FEA using ANSYS software. Stresses and deflection results were verified for analytical and experimental results. Result shows that, the composite spring has stresses much lower than steel leaf spring and weight of composite spring was nearly reduced up to 85%.

  16. Virtual Hubs for facilitating access to Open Data

    Science.gov (United States)

    Mazzetti, Paolo; Latre, Miguel Á.; Ernst, Julia; Brumana, Raffaella; Brauman, Stefan; Nativi, Stefano

    2015-04-01

    In October 2014 the ENERGIC-OD (European NEtwork for Redistributing Geospatial Information to user Communities - Open Data) project, funded by the European Union under the Competitiveness and Innovation framework Programme (CIP), has started. In response to the EU call, the general objective of the project is to "facilitate the use of open (freely available) geographic data from different sources for the creation of innovative applications and services through the creation of Virtual Hubs". In ENERGIC-OD, Virtual Hubs are conceived as information systems supporting the full life cycle of Open Data: publishing, discovery and access. They facilitate the use of Open Data by lowering and possibly removing the main barriers which hampers geo-information (GI) usage by end-users and application developers. Data and data services heterogeneity is recognized as one of the major barriers to Open Data (re-)use. It imposes end-users and developers to spend a lot of effort in accessing different infrastructures and harmonizing datasets. Such heterogeneity cannot be completely removed through the adoption of standard specifications for service interfaces, metadata and data models, since different infrastructures adopt different standards to answer to specific challenges and to address specific use-cases. Thus, beyond a certain extent, heterogeneity is irreducible especially in interdisciplinary contexts. ENERGIC-OD Virtual Hubs address heterogeneity adopting a mediation and brokering approach: specific components (brokers) are dedicated to harmonize service interfaces, metadata and data models, enabling seamless discovery and access to heterogeneous infrastructures and datasets. As an innovation project, ENERGIC-OD will integrate several existing technologies to implement Virtual Hubs as single points of access to geospatial datasets provided by new or existing platforms and infrastructures, including INSPIRE-compliant systems and Copernicus services. ENERGIC OD will deploy a

  17. Spring integration essentials

    CERN Document Server

    Pandey, Chandan

    2015-01-01

    This book is intended for developers who are either already involved with enterprise integration or planning to venture into the domain. Basic knowledge of Java and Spring is expected. For newer users, this book can be used to understand an integration scenario, what the challenges are, and how Spring Integration can be used to solve it. Prior experience of Spring Integration is not expected as this book will walk you through all the code examples.

  18. Pro Spring Integration

    CERN Document Server

    Lui, M; Chan, Andy; Long, Josh

    2011-01-01

    Pro Spring Integration is an authoritative book from the experts that guides you through the vast world of enterprise application integration (EAI) and application of the Spring Integration framework towards solving integration problems. The book is:. * An introduction to the concepts of enterprise application integration * A reference on building event-driven applications using Spring Integration * A guide to solving common integration problems using Spring Integration What makes this book unique is its coverage of contemporary technologies and real-world information, with a focus on common p

  19. Passivity-based control with collision avoidance for a hub-beam spacecraft

    Science.gov (United States)

    Wen, Hao; Chen, Ti; Jin, Dongping; Hu, Haiyan

    2017-01-01

    For the application of robotically assembling large space structures, a feedback control law is synthesized for transitional and rotational maneuvers of a 'tug' spacecraft in order to transport a flexible element to a desired position without colliding with other space bodies. The flexible element is treated as a long beam clamped to the 'tug' spacecraft modelled as a rigid hub. First, the physical property of passivity of Euler-Lagrange system is exploited to design the position and attitude controllers by taking a simpler obstacle-free control problem into account. To reduce sensing and actuating requirements, the vibration modes of the beam appendage are supposed to be not directly measured and actuated on. Besides, the requirements of measuring velocities are removed with the aid of a dynamic extension technique. Second, the bounding boxes in the form of super-quadric surfaces are exploited to enclose the maximal extents of the obstacles and the hub-beam spacecraft. The collision avoidance between bounding boxes is achieved by applying additional repulsive force and torque to the spacecraft based on the method of artificial potential field. Finally, the effectiveness of proposed control scheme is numerically demonstrated via case studies.

  20. Hexcrete Tower for Harvesting Wind Energy at Taller Hub Heights - Budget Period 2

    Energy Technology Data Exchange (ETDEWEB)

    Sritharan, Sri [Iowa State Univ., Ames, IA (United States)

    2017-05-01

    Interest in designing taller towers for wind energy production in the United States (U.S.) has been steadily growing. In May 2015, it was revealed that taller towers will make wind energy production a reality in all 50 states, including some states that have nearly zero renewables in their energy portfolio. Facilitating wind energy production feasibility in all 50 states will no doubt contribute to increasing the electricity produced by wind from 4.5% in 2013 to a targeted scenario of 35% by 2050 in the Wind Vision report. This project focuses on the Hexcrete tower concept developed for tall towers using High Strength Concrete (HSC) and/or Ultra-High Performance Concrete (UHPC). Among other benefits, the Hexcrete concept overcomes transportation and logistical challenges, thus facilitating construction of towers with hub heights of 100-m (328-ft) and higher. The goal of this project is to facilitate widespread deployment of Hexcrete towers for harvesting wind energy at 120 to 140-m (394 to 459-ft) hub heights and reduce the Levelized Cost of Energy (LCOE) of wind energy production in the U.S. The technical scope of the project includes detailed design and optimization of at least three wind turbine towers using the Hexcrete concept together with experimental validation and LCOE analyses and development of a commercialization plan.

  1. Abnormal Intrinsic Functional Hubs in Severe Male Obstructive Sleep Apnea: Evidence from a Voxel-Wise Degree Centrality Analysis

    Science.gov (United States)

    Shao, Yi; Gong, Honghan; Zhang, Wei; Zeng, Xianjun; Ye, Chenglong; Nie, Si; Chen, Liting; Peng, Dechang

    2016-01-01

    Purpose Obstructive sleep apnea (OSA) has been associated with changes in brain structure and regional function in certain brain areas. However, the functional features of network organization in the whole brain remain largely uncertain. The purpose of this study was to identify the OSA-related spatial centrality distribution of the whole brain functional network and to investigate the potential altered intrinsic functional hubs. Methods Forty male patients with newly confirmed severe OSA on polysomnography, and well-matched good sleepers, participated in this study. All participants underwent a resting-state functional MRI scan and clinical and cognitive evaluation. Voxel-wise degree centrality (DC) was measured across the whole brain, and group difference in DC was compared. The relationship between the abnormal DC value and clinical variables was assessed using a linear correlation analysis. Results Remarkably similar spatial distributions of the functional hubs (high DC) were found in both groups. However, OSA patients exhibited a pattern of significantly reduced regional DC in the left middle occipital gyrus, posterior cingulate cortex, left superior frontal gyrus, and bilateral inferior parietal lobule, and DC was increased in the right orbital frontal cortex, bilateral cerebellum posterior lobes, and bilateral lentiform nucleus, including the putamen, extending to the hippocampus, and the inferior temporal gyrus, which overlapped with the functional hubs. Furthermore, a linear correlation analysis revealed that the DC value in the posterior cingulate cortex and left superior frontal gyrus were positively correlated with Montreal cognitive assessment scores, The DC value in the left middle occipital gyrus and bilateral inferior parietal lobule were negatively correlated with apnea-hypopnea index and arousal index in OSA patients. Conclusion Our findings suggest that OSA patients exhibited specific abnormal intrinsic functional hubs including relatively

  2. Biogeochemistry of hypersaline springs supporting a mid-continent marine ecosystem: an analogue for martian springs?

    Science.gov (United States)

    Grasby, Stephen E; Londry, Kathleen L

    2007-08-01

    Hypersaline springs that host unique mid-continent marine ecosystems were examined in central Manitoba, Canada. The springs originate from a reflux of glacial meltwater that intrudes into underlying bedrock and dissolved buried salt beds. Two spring types were distinguished based both on flow rate and geochemistry. High flow springs (greater than 10 L/s) hosted extensive marine microbial mats, which were dominated by algae but also included diverse microbes. These varied somewhat between springs as indicated by changes in profiles of fatty acid methyl esters. Culture studies confirmed the presence of sulfate-reducing bacteria in sediments at the high flow sites. In contrast, low flow springs were affected by solar evaporation, increasing salinity, and temperature. These low flow springs behaved more like closed nutrient-limited systems and did not support microbial mats. Direct comparison of the high and low flow springs revealed interesting implications for the potential to record biosignatures in the rock record. High flow springs have abundant, well-developed microbial mats, which desiccate and are cemented along the edges of the spring pools; however, the high mass flux overwhelms any geochemical signature of microbial activity. In contrast, the nutrient-limited low flow sites develop strong geochemical signatures of sulfate reduction, even in the absence of microbial mats, due to less dilution with the lower flows. Geochemical and physical evidence for life did not correlate with the abundance of microbial life but, rather, with the extent to which the biological system formed a closed ecosystem.

  3. Contextual Hub Analysis Tool (CHAT: A Cytoscape app for identifying contextually relevant hubs in biological networks [version 2; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Tanja Muetze

    2016-08-01

    Full Text Available Highly connected nodes (hubs in biological networks are topologically important to the structure of the network and have also been shown to be preferentially associated with a range of phenotypes of interest. The relative importance of a hub node, however, can change depending on the biological context. Here, we report a Cytoscape app, the Contextual Hub Analysis Tool (CHAT, which enables users to easily construct and visualize a network of interactions from a gene or protein list of interest, integrate contextual information, such as gene expression or mass spectrometry data, and identify hub nodes that are more highly connected to contextual nodes (e.g. genes or proteins that are differentially expressed than expected by chance. In a case study, we use CHAT to construct a network of genes that are differentially expressed in Dengue fever, a viral infection. CHAT was used to identify and compare contextual and degree-based hubs in this network. The top 20 degree-based hubs were enriched in pathways related to the cell cycle and cancer, which is likely due to the fact that proteins involved in these processes tend to be highly connected in general. In comparison, the top 20 contextual hubs were enriched in pathways commonly observed in a viral infection including pathways related to the immune response to viral infection. This analysis shows that such contextual hubs are considerably more biologically relevant than degree-based hubs and that analyses which rely on the identification of hubs solely based on their connectivity may be biased towards nodes that are highly connected in general rather than in the specific context of interest.   Availability: CHAT is available for Cytoscape 3.0+ and can be installed via the Cytoscape App Store (http://apps.cytoscape.org/apps/chat.

  4. Spring A Developer's Notebook

    CERN Document Server

    Tate, Bruce A

    2009-01-01

    This no-nonsense book quickly gets you up to speed on the new Spring open source framework. Favoring examples and practical application over theory, Spring: A Developer's Notebook features 10 code-intensive labs that'll reveal the many assets of this revolutionary, lightweight architecture. In the end, you'll understand how to produce simple, clean, and effective applications.

  5. Mockito for Spring

    CERN Document Server

    Acharya, Sujoy

    2015-01-01

    If you are an application developer with some experience in software testing and want to learn more about testing frameworks, then this technology and book is for you. Mockito for Spring will be perfect as your next step towards becoming a competent software tester with Spring and Mockito.

  6. Masters of the springs

    DEFF Research Database (Denmark)

    Laursen, Steffen

    2010-01-01

    led to a number of insights into the social organization of the mound cemeteries that will be presented in the paper. It is obvious that there existed a close spatial relation between freshwater springs and the compact mounds cemeteries that emerged c.2050 BC. The mound cemeteries appear to have been...... flanked by villages that relied on these water recourses for agricultural production. The springs emerged in the zone separating the cemeteries from the settlements. The freshwater springs were actively incorporated into the religious landscape of the dead, by consistently erecting mounds of a particular...... high status type right above the head of each spring. These tombs of the masters of the springs are distinguished by their larger size and vertical shaft entrance. It is argued that this particular strategy of power was employed after population growth had intensified conflicts over the rights...

  7. Fabrication and experimentation of FRP helical spring

    Science.gov (United States)

    Ekanthappa, J.; Shiva Shankar, G. S.; Amith, B. M.; Gagan, M.

    2016-09-01

    In present scenario, the automobile industry sector is showing increased interest in reducing the unsprung weight of the automobile & hence increasing the fuel Efficiency. One of the feasible sub systems of a vehicle where weight reduction may be attempted is vehicle- suspension system. Usage of composite material is a proven way to lower the component weight without any compromise in strength. The composite materials are having high specific strength, more elastic strain energy storage capacity in comparison with those of steel. Therefore, helical coil spring made of steel is replaceable by composite cylindrical helical coil spring. This research aims at preparing a re-usable mandrel (mould) of Mild steel, developing a setup for fabrication, fabrication of FRP helical spring using continuous glass fibers and Epoxy Resin (Polymer). Experimentation has been conducted on fabricated FRP helical spring to determine its strength parameters & for failure analysis. It is found that spring stiffness (K) of Glass/Epoxy helical-spring is greater than steel-coil spring with reduced weight.

  8. An Endosymbiotic Evolutionary Algorithm for the Hub Location-Routing Problem

    Directory of Open Access Journals (Sweden)

    Ji Ung Sun

    2015-01-01

    Full Text Available We consider a capacitated hub location-routing problem (HLRP which combines the hub location problem and multihub vehicle routing decisions. The HLRP not only determines the locations of the capacitated p-hubs within a set of potential hubs but also deals with the routes of the vehicles to meet the demands of customers. This problem is formulated as a 0-1 mixed integer programming model with the objective of the minimum total cost including routing cost, fixed hub cost, and fixed vehicle cost. As the HLRP has impractically demanding for the large sized problems, we develop a solution method based on the endosymbiotic evolutionary algorithm (EEA which solves hub location and vehicle routing problem simultaneously. The performance of the proposed algorithm is examined through a comparative study. The experimental results show that the proposed EEA can be a viable solution method for the supply chain network planning.

  9. The catheter hub disinfection cap as esophageal foreign body.

    Science.gov (United States)

    Tawfik, Kareem O; Myer, Charles M; Shikary, Tasneem; Goldschneider, Kenneth R

    2015-12-01

    Disinfection caps are increasingly being used to prevent catheter-associated bloodstream infections. These devices, designed for continuous passive disinfection of catheter hubs, are typically small and often brightly colored. As such, they have the potential to become pediatric airway and esophageal foreign bodies. We report two patients who developed esophageal foreign body following ingestion of disinfection caps. Given the increasing use of these devices, it is imperative that health care providers be aware of this potential iatrogenic problem. We propose that the use of disinfection caps may not be appropriate in pediatric patients with risk factors for foreign body ingestion.

  10. Wake center position tracking using downstream wind turbine hub loads

    Science.gov (United States)

    Cacciola, S.; Bertelè, M.; Schreiber, J.; Bottasso, C. L.

    2016-09-01

    Having an improved awareness of the flow within a wind farm is useful for power harvesting maximization, load minimization and design of wind farm layout. Local flow information at each wind turbine location can be obtained by using the response of the wind turbines, which are consequently used as distributed sensors. This paper proposes the use of hub loads to track the position of wakes within a wind farm. Simulation experiments conducted within a high-fidelity aeroservoelastic environment demonstrate the performance of the new method.

  11. Collective versus hub activation of epidemic phases on networks

    CERN Document Server

    Ferreira, Silvio C; Pastor-Satorras, Romualdo

    2015-01-01

    We consider a general criterion to discern the nature of the threshold in epidemic models on scale-free (SF) networks. Comparing the epidemic lifespan of the nodes with largest degrees with the infection time between them, we propose a general dual scenario, in which the epidemic transition is either ruled by a hub activation process, leading to a null threshold in the thermodynamic limit, or given by a collective activation process, corresponding to a standard phase transition with a finite threshold. We validate the proposed criterion applying it different to epidemic models, with waning immunity or heterogeneous infection rates.

  12. Transport of pollutants and sediment in the area of the Wave Hub (Celtic Sea)

    Science.gov (United States)

    Shapiro, Georgy; Huntley, David

    2010-05-01

    Ocean waves are a sustainable source of alternative energy that, if properly developed, will provide a quarter of current electricity demand and contribute to lowering the UK's reliance on fossil fuels. The UK government has given planning approval for a pilot power plant called the Wave Hub located in the eastern Celtic Sea off the Cornish north coast. The impact of a small number of devices on the physical environment is expected to be subtle outside the exclusion zone. However, such pilot projects are considered as the launching pad in the UK's ambitious programme to create a new wave energy industry. Large scale off-shore industrial activity can interact with the physical environment of the shelf sea in a two-fold manner: (i) the wave farm is affected by the waves, currents, variation in temperature and movements of sediment, and (ii) it can impact on the marine environment via a number of ways including release of dissolved and suspended matter during construction, operational and decommission stages of the project. These changes in the physical environment can then be translated into changes of the ecosystem and corresponding human activities. The Celtic Sea has a highly variable and complex thermal structure. In the spring and summer the water column becomes stratified due to solar heating of the surface layer, particularly in the areas of greater depth and/or low currents, where the turbulence is insufficient to mix the entire water column. Fronts form at the junctions of stratified and mixed water columns and these fronts generate currents which flow along the fronts. These frontal currents are subject to baroclinic instability and generate a whole set of mesoscale (i.e. comparable with the baroclinic Rossby radius) features such as eddies, filaments and mushroom currents, which are clearly seen on satellite images. Ecosystems are particularly concentrated in the vicinity of fronts so changes in frontal strength or location can have significant biological

  13. Rocky Mountain Carbonate Spring Deposit development

    Science.gov (United States)

    Rainey, Dustin Kyle

    water with low [Ca2+] and [HCO3-] precipitated smaller quantities of calcite and required longer flow distances to achieve CaCO3 supersaturation (e.g. Hot Creek). Spring water discharge volumes were controlled mainly by seasonal to millennial fluctuations in meteoric precipitation. Modern spring systems are characterized by reduced discharge volumes, channeled flow, and minimal calcite precipitation. Currently, spring water does not precipitate calcite where it flows into streams prior to achieving critical CaCO 3 supersaturation (e.g. Fall Creek).

  14. The hubs of the human connectome are generally implicated in the anatomy of brain disorders.

    Science.gov (United States)

    Crossley, Nicolas A; Mechelli, Andrea; Scott, Jessica; Carletti, Francesco; Fox, Peter T; McGuire, Philip; Bullmore, Edward T

    2014-08-01

    Brain networks or 'connectomes' include a minority of highly connected hub nodes that are functionally valuable, because their topological centrality supports integrative processing and adaptive behaviours. Recent studies also suggest that hubs have higher metabolic demands and longer-distance connections than other brain regions, and therefore could be considered biologically costly. Assuming that hubs thus normally combine both high topological value and high biological cost, we predicted that pathological brain lesions would be concentrated in hub regions. To test this general hypothesis, we first identified the hubs of brain anatomical networks estimated from diffusion tensor imaging data on healthy volunteers (n = 56), and showed that computational attacks targeted on hubs disproportionally degraded the efficiency of brain networks compared to random attacks. We then prepared grey matter lesion maps, based on meta-analyses of published magnetic resonance imaging data on more than 20 000 subjects and 26 different brain disorders. Magnetic resonance imaging lesions that were common across all brain disorders were more likely to be located in hubs of the normal brain connectome (P brain disorders had lesions that were significantly more likely to be located in hubs (P human brain networks are more likely to be anatomically abnormal than non-hubs in many (if not all) brain disorders. © The Author (2014). Published by Oxford University Press on behalf of the Guarantors of Brain.

  15. Design of targeted libraries against the human Chk1 kinase using PGVL Hub.

    Science.gov (United States)

    Peng, Zhengwei; Hu, Qiyue

    2011-01-01

    PGVL Hub is a Pfizer internal desktop tool for chemical library and singleton design. In this chapter, we give a short introduction to PGVL Hub, the core workflow it supports, and the rich design capabilities it provides. By re-creating two legacy targeted libraries against the human checkpoint kinase 1 (Chk1) as a showcase, we illustrate how PGVL Hub could be used to help library designers carry out the steps in library design and realize design objectives such as SAR expansion and improvement in both kinase selectivity and compound aqueous solubility. Finally we share several tips about library design and usage of PGVL Hub.

  16. Dynamic simulation on rubber spring supporting equipment of vibrating screen

    Institute of Scientific and Technical Information of China (English)

    SU Rong-hua; PENG Chen-yu

    2011-01-01

    By ANSYS, dynamic simulation analysis of rubber spring supporting equipment used in vibrating screen was made. The modal frequency, mode, and harmonic displacement under working frequency were obtained. Variation of rubber spring supporting equipment's dynamic performance was discussed first, which is under the condition of existing spring stiffness difference and exciting force bias. Also, the quantitative calculation formulas were given. The results indicate that the performance of vibrating screen is closely related with rubber spring supporting equipment's dynamic performance. Differences of springs' stiffness coefficients reduce the modal frequency reduced, decrease the dynamic stiffness, and increase vibration displacement. Exciting force bias induces a larger lateral displacement. When rubber springs' stiffness coefficients exist, differences and lateral force accounts for 5% in total exciting force; rubber spring supporting equipment's side swing is larger than 1 mm, exceeding the side swing limit.

  17. The Spring Festival

    Institute of Scientific and Technical Information of China (English)

    萧平

    2005-01-01

    Everybody likes to have the Spring Festival, so do I.Because during the Spring Festival there are many good things to eat, to drink and to play with. During the last Spring Festival I had a very good time. On the eve of the festival, our family had a big dinner. My uncle, aunt and cousin came back from Canada to celebrate(庆祝) my grandma's eightieth birthday. They also brought many beautiful gifts to me. My cousin and I watched TV and played games the whole night, while the grown-ups had a long talk. I didn't know when I fell asleep.

  18. Disinfection of Needleless Connector Hubs: Clinical Evidence Systematic Review

    Science.gov (United States)

    Moureau, Nancy L.

    2015-01-01

    Background. Needleless connectors (NC) are used on virtually all intravascular devices, providing an easy access point for infusion connection. Colonization of NC is considered the cause of 50% of postinsertion catheter-related infections. Breaks in aseptic technique, from failure to disinfect, result in contamination and subsequent biofilm formation within NC and catheters increasing the potential for infection of central and peripheral catheters. Methods. This systematic review evaluated 140 studies and 34 abstracts on NC disinfection practices, the impact of hub contamination on infection, and measures of education and compliance. Results. The greatest risk for contamination of the catheter after insertion is the NC with 33–45% contaminated, and compliance with disinfection as low as 10%. The optimal technique or disinfection time has not been identified, although scrubbing with 70% alcohol for 5–60 seconds is recommended. Studies have reported statistically significant results in infection reduction when passive alcohol disinfection caps are used (48–86% reduction). Clinical Implications. It is critical for healthcare facilities and clinicians to take responsibility for compliance with basic principles of asepsis compliance, to involve frontline staff in strategies, to facilitate education that promotes understanding of the consequences of failure, and to comply with the standard of care for hub disinfection. PMID:26075093

  19. Disinfection of Needleless Connector Hubs: Clinical Evidence Systematic Review

    Directory of Open Access Journals (Sweden)

    Nancy L. Moureau

    2015-01-01

    Full Text Available Background. Needleless connectors (NC are used on virtually all intravascular devices, providing an easy access point for infusion connection. Colonization of NC is considered the cause of 50% of postinsertion catheter-related infections. Breaks in aseptic technique, from failure to disinfect, result in contamination and subsequent biofilm formation within NC and catheters increasing the potential for infection of central and peripheral catheters. Methods. This systematic review evaluated 140 studies and 34 abstracts on NC disinfection practices, the impact of hub contamination on infection, and measures of education and compliance. Results. The greatest risk for contamination of the catheter after insertion is the NC with 33–45% contaminated, and compliance with disinfection as low as 10%. The optimal technique or disinfection time has not been identified, although scrubbing with 70% alcohol for 5–60 seconds is recommended. Studies have reported statistically significant results in infection reduction when passive alcohol disinfection caps are used (48–86% reduction. Clinical Implications. It is critical for healthcare facilities and clinicians to take responsibility for compliance with basic principles of asepsis compliance, to involve frontline staff in strategies, to facilitate education that promotes understanding of the consequences of failure, and to comply with the standard of care for hub disinfection.

  20. Identifying the Functional Requirements for an Arizona Astronomy Data Hub (AADH)

    Science.gov (United States)

    Stahlman, G.; Heidorn, P. B.

    2015-12-01

    Astronomy data represent a curation challenge for information managers, as well as for astronomers. Extracting knowledge from these heterogeneous and complex datasets is particularly complicated and requires both interdisciplinary and domain expertise to accomplish true curation, with an overall goal of facilitating reproducible science through discoverability and persistence. A group of researchers and professional staff at the University of Arizona held several meetings during the spring of 2015 about astronomy data and the role of the university in curation of that data. The group decided that it was critical to obtain a broader consensus on the needs of the community. With assistance from a Start for Success grant provided by the University of Arizona Office of Research and Discovery and funding from the American Astronomical Society (AAS), a workshop was held in early July 2015, with 28 participants plus 4 organizers in attendance. Representing University researchers as well as astronomical facilities and a scholarly society, the group verified that indeed there is a problem with the long-term curation of some astronomical data not associated with major facilities, and that a repository or "data hub" with the correct functionality could facilitate research and the preservation and use of astronomy data. The workshop members also identified a set of next steps, including the identification of possible data and metadata to be included in the Hub. The participants further helped to identify additional information that must be gathered before construction of the AADH could begin, including identifying significant datasets that do not currently have sufficient preservation and dissemination infrastructure, as well as some data associated with journal publications and the broader context of the data beyond that directly published in the journals. Workshop participants recommended that a set of grant proposal should be developed that ensures community buy-in and

  1. Fish Springs pond snail

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Communication scenario between the branch of Listing and Recovery, Fish and Wildlife Enhancement, and Fish Springs National Wildlife Refuge (NWR), in regards to the...

  2. Spring Bottom Trawl Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The standardized NEFSC Spring Bottom Trawl Survey was initiated in 1968 and covered an area from Cape Hatteras, NC, to Nova Scotia, Canada, at depths >27m....

  3. Learning Spring application development

    CERN Document Server

    Soni, Ravi Kant

    2015-01-01

    This book is intended for those who are interested in learning the core features of the Spring Framework. Prior knowledge of Java programming and web development concepts with basic XML knowledge is expected.

  4. Harbingers of Spring

    Science.gov (United States)

    Serrao, John

    1976-01-01

    Emphasizing the spring migration of frogs, toads, and salamanders to their watery breeding sites, this article presents information on numerous amphibians and suggests both indoor and outdoor educational activities appropriate for elementary and/or early secondary instruction. (JC)

  5. The Springs at Pipe Spring National Monument, Arizona (pisp_springs)

    Data.gov (United States)

    National Park Service, Department of the Interior — This is an Arc/Info coverage consisting of 5 points representing the springs, natural and man-made, at Pipe Spring National Monument, Arizona. The springs were...

  6. Why primary care practices should become digital health information hubs for their patients.

    Science.gov (United States)

    Baird, Aaron; Nowak, Samantha

    2014-11-25

    Two interesting health care trends are currently occurring: 1) patient-facing technologies, such as personal health records, patient portals, and mobile health apps, are being adopted at rapid rates, and 2) primary care, which includes family practice, is being promoted as essential to reducing health care costs and improving health care outcomes. While these trends are notable and commendable, both remain subject to significant fragmentation and incentive misalignments, which has resulted in significant data coordination and value generation challenges. In particular, patient-facing technologies designed to increase care coordination, often fall prey to the very digital fragmentation issues they are supposed to overcome. Additionally, primary care providers are treating patients that may have considerable health information histories, but generating a single view of such multi-source data is nearly impossible. We contribute to this debate by proposing that primary care practices become digital health information hubs for their patients. Such hubs would offer health data coordination in a medically professional setting with the benefits of expert, trustworthy advice coupled with active patient engagement. We acknowledge challenges including: costs, information quality and provenance, willingness-to-share information and records, willingness-to-use (by both providers and patients), primary care scope creep, and determinations of technical and process effectiveness. Even with such potential challenges, we strongly believe that more debate is needed on this topic prior to full implementation of various health information technology incentives and reform programs currently being designed and enacted throughout the world. Ultimately, if we do not provide a meaningful way for the full spectrum of health information to be used by both providers and patients, especially early in the health care continuum, effectively improving health outcomes may remain elusive. We view

  7. Knowledge Hub y los recursos educativos abiertos en Contaduría

    OpenAIRE

    Farías Martínez, Gabriela María

    2010-01-01

    Desafíos de la educación superior en México; Formación académica y profesional en contaduría; Knowledge Hub como medio para compartir y construir conocimiento; Iniciativa Knowledge Hub IES Contaduría

  8. 14 CFR 158.30 - PFC Authorization at Non-Hub Airports.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false PFC Authorization at Non-Hub Airports. 158... (CONTINUED) AIRPORTS PASSENGER FACILITY CHARGES (PFC'S) Application and Approval § 158.30 PFC Authorization at Non-Hub Airports. (a) General. This section specifies the procedures a public agency controlling...

  9. The Complexities and Challenges of Regional Education Hubs: Focus on Malaysia

    Science.gov (United States)

    Knight, Jane; Morshidi, Sirat

    2011-01-01

    The race to establish regional education hubs is a recent development in cross-border higher education. This article briefly examines the rationales and strategies used by three countries in the Middle East and three in South East Asia which are working towards positioning themselves as regional education hubs. The different approaches and…

  10. Knowledge Hub y los recursos educativos abiertos en Contaduría

    OpenAIRE

    Farías Martínez, Gabriela María

    2013-01-01

    Desafíos de la educación superior en México; Formación académica y profesional en contaduría; Knowledge Hub como medio para compartir y construir conocimiento; Iniciativa Knowledge Hub IES Contaduría

  11. A multi-objective imperialist competitive algorithm for a capacitated hub covering location problem

    Directory of Open Access Journals (Sweden)

    M. Mohammadi

    2011-01-01

    Full Text Available The hub location problem appears in a variety of applications, including airline systems, cargo delivery systems and telecommunication network design. Hub location problems deal with finding the location of hub facilities and the allocation of demand nodes to these located hub facilities. In this paper, a new model for the capacitated single allocation hub covering location problem is presented. Instead of using capacity constraints to limit the amount of flow received by the hubs, the second objective function is introduced to minimize service times in the hubs. The service time in the hubs includes the waiting time of received flows in a queue and the time to get services. Due to the NP-hardness of the problem, a new weight-based multi-objective imperialist competitive algorithm (MOICA is designed to find near-optimal solutions. To validate the performance of the proposed algorithm, the solutions obtained by the MOICA are compared by the exact solutions of the mathematical programming model.

  12. Domestic Output of Aluminium Alloy Hub Surpassing 70 million in 2007

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>According to a report from the hub branch of China Association of Automobile Manufactur- ers,China has produced a total of more than 70 million aluminium alloy hubs in 2007,a year- on-year growth over 25%,while consuming over 700,000 tons of primary aluminium the whole year.

  13. Optimal Scheduling of a Multi-Carrier Energy Hub Supplemented By Battery Energy Storage Systems

    DEFF Research Database (Denmark)

    Javadi, Mohammad Sadegh; Anvari-Moghaddam, Amjad; Guerrero, Josep M.

    2017-01-01

    This paper introduces a management model for optimal scheduling of a multi-carrier energy hub. In the proposed hub, three types of assets are considered: dispersed generating systems (DGs) such as micro-combined heat and power (mCHP) units, storage devices such as battery-based electrical storage...

  14. Network performance, hub connectivity potential, and competitive position of primary airports in Asia/Pacific region

    NARCIS (Netherlands)

    Matsumoto, H.; Veldhuis, J.; de Wit, J.; Burghouwt, G.

    2008-01-01

    Recently, hub-and-spoke network configurations are more and more developed in the Asia/Pacific region. In this paper, it is argued that the measurement of network performance in hub-and-spoke systems should take into account the quantity and quality of both direct and indirect connections. The NetSc

  15. The Complexities and Challenges of Regional Education Hubs: Focus on Malaysia

    Science.gov (United States)

    Knight, Jane; Morshidi, Sirat

    2011-01-01

    The race to establish regional education hubs is a recent development in cross-border higher education. This article briefly examines the rationales and strategies used by three countries in the Middle East and three in South East Asia which are working towards positioning themselves as regional education hubs. The different approaches and…

  16. Competition and coordination in the U.S. airline hub-to-hub markets: An industry pre-merger case study

    Directory of Open Access Journals (Sweden)

    Prasun Bhattacharjee

    2016-04-01

    Full Text Available Purpose: This paper investigates the nature of conduct that existed in the U.S. airline hub-to-hub markets prior to the recent merger wave of the legacy carriers. We explore the strategic importance of network carrier hubs in form of “spheres of influence” on airline market conduct. We also simultaneously recognize the overgrowing role played by Low Cost Carriers (LCC over the years by estimating two conduct parameters - one in markets where LCCs directly compete head-to-head with legacy carriers and the other for markets which LCCs do not serve but has presence in the hub airports or adjacent airports comprising the market endpoints. Thus our supply side framework also sheds some light on the issue of perfect contestability in airline industry. Design/methodology/approach: We estimate a structural oligopoly model for differentiated products with competitive interactions using DB1B data for first quarter of 2004. Findings: Our results imply that the nature of competition is more aggressive relative to Bertrand behavior in hub-to-hub markets and that these markets are less than perfectly contestable. Originality/value: This paper adds to the empirical literature of airline competition by enabling estimation of the actual conduct parameter assuming firm price setting behavior in presence of product differentiation. Contrary to existing literature on airline competition, a structural model enables us to systematically separate out effects of demand, cost and strategic factors on observed airline prices.

  17. Features analysis for identification of date and party hubs in protein interaction network of Saccharomyces Cerevisiae

    Directory of Open Access Journals (Sweden)

    Araabi Babak N

    2010-12-01

    Full Text Available Abstract Background It has been understood that biological networks have modular organizations which are the sources of their observed complexity. Analysis of networks and motifs has shown that two types of hubs, party hubs and date hubs, are responsible for this complexity. Party hubs are local coordinators because of their high co-expressions with their partners, whereas date hubs display low co-expressions and are assumed as global connectors. However there is no mutual agreement on these concepts in related literature with different studies reporting their results on different data sets. We investigated whether there is a relation between the biological features of Saccharomyces Cerevisiae's proteins and their roles as non-hubs, intermediately connected, party hubs, and date hubs. We propose a classifier that separates these four classes. Results We extracted different biological characteristics including amino acid sequences, domain contents, repeated domains, functional categories, biological processes, cellular compartments, disordered regions, and position specific scoring matrix from various sources. Several classifiers are examined and the best feature-sets based on average correct classification rate and correlation coefficients of the results are selected. We show that fusion of five feature-sets including domains, Position Specific Scoring Matrix-400, cellular compartments level one, and composition pairs with two and one gaps provide the best discrimination with an average correct classification rate of 77%. Conclusions We study a variety of known biological feature-sets of the proteins and show that there is a relation between domains, Position Specific Scoring Matrix-400, cellular compartments level one, composition pairs with two and one gaps of Saccharomyces Cerevisiae's proteins, and their roles in the protein interaction network as non-hubs, intermediately connected, party hubs and date hubs. This study also confirms the

  18. Effective spectral dimension of hub in scale-free networks

    Science.gov (United States)

    Hwang, Sungmin; Lee, Deok-Sun; Kahng, Byungnam

    2012-02-01

    Exploring the World Wide Web has become one of the key issues in information science, specifically in context of its application to the PageRank-like algorithms used in search engine. The random walk approach has been employed to study such a problem. The probability of the return to the origin (RTO) of random walks is inversely related to how information can be accessed during random surfing. We find analytically that the RTO probability for a given starting node shows a crossover from a slow to a fast decay behavior with time and the crossover time increases with the degree of the starting node. Furthermore, the RTO probability is almost constant in the early-time regime as the degree exponent approaches two. This result indicates that a random surfer can be effectively trapped at the hub and supports the necessity of the random jump strategy empirically used in the Google's search engine.

  19. Paneth cells: the hub for sensing and regulating intestinal flora.

    Science.gov (United States)

    Zhang, Zheng; Liu, Zhihua

    2016-05-01

    The complex interplay between symbiotic bacteria and host immunity plays a key role in shaping intestinal homeostasis and maintaining host health. Paneth cells, as one of the major producers of antimicrobial peptides in the intestine under steady-state conditions, play a vital role in regulating intestinal flora. Many studies on inflammatory bowel disease (IBD)-associated genes have put Paneth cells at the center of IBD pathogenesis. In this perspective, we focus on mechanistic studies of different cellular processes in Paneth cells that are regulated by various IBD-associated susceptibility genes, and we discuss the hypothesis that Paneth cells function as the central hub for sensing and regulating intestinal flora in the maintenance of intestinal homeostasis.

  20. A Collaborative Scheduling Model for the Supply-Hub with Multiple Suppliers and Multiple Manufacturers

    Directory of Open Access Journals (Sweden)

    Guo Li

    2014-01-01

    Full Text Available This paper investigates a collaborative scheduling model in the assembly system, wherein multiple suppliers have to deliver their components to the multiple manufacturers under the operation of Supply-Hub. We first develop two different scenarios to examine the impact of Supply-Hub. One is that suppliers and manufacturers make their decisions separately, and the other is that the Supply-Hub makes joint decisions with collaborative scheduling. The results show that our scheduling model with the Supply-Hub is a NP-complete problem, therefore, we propose an auto-adapted differential evolution algorithm to solve this problem. Moreover, we illustrate that the performance of collaborative scheduling by the Supply-Hub is superior to separate decision made by each manufacturer and supplier. Furthermore, we also show that the algorithm proposed has good convergence and reliability, which can be applicable to more complicated supply chain environment.

  1. Hub Identification of the Metro Manila Road Network Using PageRank

    CERN Document Server

    Chan, Jacob

    2016-01-01

    We attempt to identify the different node hubs of a road network using PageRank for preparation for possible random terrorist attacks. The robustness of a road network against such attack is crucial to be studied because it may cripple its connectivity by simply shutting down these hubs. We show the important hubs in a road network based on network structure and propose a model for robustness analysis. By identifying important hubs in a road network, possible preparation schemes may be done earlier to mitigate random terrorist attacks, including defense reinforcement and transportation security. A case study of the Metro Manila road network is also presented. The case study shows that the most important hubs in the Metro Manila road network are near airports, piers, major highways and expressways

  2. A Fractal and Scale-free Model of Complex Networks with Hub Attraction Behaviors

    CERN Document Server

    Kuang, Li; Li, Deyi; Li, Yuanxiang; Sun, Yu

    2013-01-01

    It is widely believed that fractality of complex networks origins from hub repulsion behaviors (anticorrelation or disassortativity), which means large degree nodes tend to connect with small degree nodes. This hypothesis was demonstrated by a dynamical growth model, which evolves as the inverse renormalization procedure proposed by Song et al. Now we find that the dynamical growth model is based on the assumption that all the cross-boxes links has the same probability e to link to the most connected nodes inside each box. Therefore, we modify the growth model by adopting the flexible probability e, which makes hubs have higher probability to connect with hubs than non-hubs. With this model, we find some fractal and scale-free networks have hub attraction behaviors (correlation or assortativity). The results are the counter-examples of former beliefs.

  3. MODELS AND METHODS FOR LOGISTICS HUB LOCATION: A REVIEW TOWARDS TRANSPORTATION NETWORKS DESIGN

    Directory of Open Access Journals (Sweden)

    Carolina Luisa dos Santos Vieira

    Full Text Available ABSTRACT Logistics hubs affect the distribution patterns in transportation networks since they are flow-concentrating structures. Indeed, the efficient moving of goods throughout supply chains depends on the design of such networks. This paper presents a literature review on the logistics hub location problem, providing an outline of modeling approaches, solving techniques, and their applicability to such context. Two categories of models were identified. While multi-criteria models may seem best suited to find optimal locations, they do not allow an assessment of the impact of new hubs on goods flow and on the transportation network. On the other hand, single-criterion models, which provide location and flow allocation information, adopt network simplifications that hinder an accurate representation of the relationshipbetween origins, destinations, and hubs. In view of these limitations we propose future research directions for addressing real challenges of logistics hubs location regarding transportation networks design.

  4. Electricity hubs and market centers: A new business tool for electric utilities?

    Energy Technology Data Exchange (ETDEWEB)

    Vallen, M.A.; Sharp, L.S. [Univ. of Toledo, OH (United States)

    1995-07-01

    There are many complexities clouding the use of hubs and market centers in the electricity market, but lessons learned in the natural gas industry can save a lot of unnecessary reinvention. The bottom line: Electricity hubs and market centers will allow the markets to work most efficiently. This article will describe how regional trading hubs may function in the competitive electricity market, using the experiences of the natural gas market to illustrate the principles involved. Part I will define the typical characteristics of hubs and market centers and describe the dey success factors needed to develop a new market center. Part II will describe the types of products and services that an electricity hub or marketing center will need to offer to succeed.

  5. JINAN: the City of Springs

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ Attractions Jinan is not a hot tourist destination in China, but it has Something special to offer, such as the 72 springs scattered throughout the city. Jinan has an alias of the Spring City (Quan Cheng)because of ouver 700 natural springs run through the city. Among them,the Baotu Spring is the most famous.

  6. USDA Southwest Regional Hub for Adaptation to and Mitigation of Climate Change

    Science.gov (United States)

    Rango, A.; Elias, E.; Steele, C. M.; Havstad, K.

    2014-12-01

    The USDA Southwest (SW) Climate Hub was created in February 2014 to develop risk adaptation and mitigation strategies for coping with climate change effects on agricultural productivity. There are seven regional hubs across the country with three subsidiary hubs. The SW Climate Hub Region is made up of six states: New Mexico, Arizona, Utah, Nevada, California and Hawaii (plus the Trust Territories of the Pacific Islands). The SW Climate Hub has a subsidiary hub located in Davis, California. The Southwest region has high climatic diversity, with the lowest and highest average annual rainfall in the U.S.(6.0 cm in Death Valley, CA and 1168 cm at Mt. Waialeale, HI). There are major deserts in five of the six states, yet most of the states, with exception of Hawaii, depend upon the melting of mountain snowpacks for their surface water supply. Additionally, many of the agricultural areas of the SW Regional Hub depend upon irrigation water to maintain productivity. Scientific climate information developed by the Hub will be used for climate-smart decision making. To do this, the SW Regional Hub will rely upon existing infrastructure of the Cooperative Extension Service at Land-Grant State Universities. Extension service and USDA-NRCS personnel have existing networks to communicate with stakeholders (farmers, ranchers, and forest landowners) through meetings and workshops which have already started in the six states. Outreach through the development of a weather and climate impact modules designed for seventh grade students and their teachers will foster education of future generations of rural land managers. We will be synthesizing and evaluating existing reports, literature and information on regional climate projections, water resources, and agricultural adaptation strategies related to climate in the Southwest. The results will be organized in a spatial format and provided through the SW Hub website (http://swclimatehub.info) and peer-reviewed articles.

  7. Springs as Ecosystems: Clarifying Groundwater Dependence and Wetland Status (Invited)

    Science.gov (United States)

    Stevens, L.; Springer, A. E.; Ledbetter, J. D.

    2013-12-01

    Springs ecosystems are among the most productive, biologically diverse and culturally important ecosystems on Earth. Net annual productivity of some springs exceeds 5 kg/m^2/yr. Springs support an estimated 19% of the endangered species and numerous rare taxa in the United States. Springs serve as keystone ecosystems in arid regions, and as cornerstones of indigenous cultural well-being, history, economics, and aesthetics. Despite their significance, the ecosystem ecology and stewardship of springs have received scant scientific and public attention, resulting in loss or impairment of 50-90% of the springs in many regions, both arid and temperate. Six reasons contribute to the lack of attention to springs. Springs are poorly mapped because: 1) their generally small size is less than the pixel area of most remote sensing analyses and they are overlooked; and 2) springs detection is often limited by emergence on cliff faces, beneath heavy vegetation cover, or under water. In addition, 3) high levels of ecosystem complexity at springs require multidisciplinary team approaches for inventory, assessment, and research, but collaboration between the fields of hydrogeology and ecology has been limited. 4) Protectionism by land owners and organizations that manage springs limits the availability information, preventing regional assessment of status. 5) Prior to recent efforts, the absence of a descriptive lexicon of springs types has limited discussion about variation in ecological characteristics and processes. 6) Neither regarded entirely as groundwater or as surface water, springs fall 'between jurisdictional cracks' and are not subject to clear legal and regulatory oversight. With regards to the latter point, two jurisdictional phrases have reduced scientific understanding and stewardship of springs ecosystems: 'jurisdictional wetlands' and 'groundwater-dependent ecosystems' (GDEs). Most springs have insufficient monitoring data to establish perenniality or the range of

  8. Spring of women?

    Directory of Open Access Journals (Sweden)

    Mónica Castillo

    2012-12-01

    Full Text Available Terms such as “Islamic feminism” and “women’s movement” refer to those social movements of women that seek to assert their rights in Islamic societies. This brief study focuses on theses social movements of women and will presentan overview of the role and participation of women in the Arab Spring by examining news, events, press articles and opinions in order to contextualize the participation of women and feminists in the Arab Spring from a perspective of the social networking phenomenon as apparent drivers of the revolution.

  9. Instant Spring security starter

    CERN Document Server

    Jagielski, Piotr

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. A concise guide written in an easy-to-follow format following the Starter guide approach.This book is for people who have not used Spring Security before and want to learn how to use it effectively in a short amount of time. It is assumed that readers know both Java and HTTP protocol at the level of basic web programming. The reader should also be familiar with Inversion-of-Control/Dependency Injection, preferably with the Spring framework itsel

  10. Pro Spring security

    CERN Document Server

    Scarioni, Carlo

    2013-01-01

    Security is a key element in the development of any non-trivial application. The Spring Security Framework provides a comprehensive set of functionalities to implement industry-standard authentication and authorization mechanisms for Java applications. Pro Spring Security will be a reference and advanced tutorial that will do the following: Guides you through the implementation of the security features for a Java web application by presenting consistent examples built from the ground-up. Demonstrates the different authentication and authorization methods to secure enterprise-level applications

  11. What's Behind Spring Festival?

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Similar to what the Christmas Day means for the westerners,the Spring Festival is the most important celebration for Chinese people.This big event according to Chinese traditional lunar calendar relaxes and pleases the whole country as the happiest gathering time of the year.National-wide crusade for going back home,too-difficult-to-get train tickets,generous family-going-out shopping,Miaohui laundering,New Year Eve reunion dinner,visiting friends and relatives,watching annual TV gala……each piece of clue reminds us of the smell of Chinese Spring Festival.

  12. The effect of spherical hub-nose position on pressure drop in an oscillating water column system for wave energy conversion

    Energy Technology Data Exchange (ETDEWEB)

    Taha, Z.; Ahmad, N.; Ghazilla, R.A.R.; Yap, H.J.; Ya, T.Y.T.; Passarella, R.; Hasanuddin, I.; Yunus, M. [Malaya Univ. (Malaysia). Centre for Product Design and Manufacturing; Sugiyono [Malaya Univ., (Malaysia). Centre for Product Design and Manufacturing; Gadjah Mada Univ. (Indonesia). Dept. of Mechanical and Industrial Engineering

    2009-07-01

    The use of renewable energy sources as an alternative to conventional fuels was discussed with particular reference to ocean wave energy and its potential to contribute to the energy requirements of coastal nations. Ocean wave energy has been harnessed and converted into electricity using processes and technologies that are environmentally sound. The oscillating water column (OWC) system is considered to be among the most promising technology for harnessing wave energy. This paper presented the results of a study that investigated the pressure drop in an OWC system and the effect of spherical hub-nose position in an annular duct. Computational fluid dynamics (CFD) analysis was used under steady flow conditions for several hub-nose positions to determine the characteristic of pressure drop. The study showed that the hub-nose position influenced the pressure drop in the OWC system. The highest value of the pressure drop in this study occurred when the hub-nose was at the position of 0.0 m relative to the end of the converging cone. The pressure drop decreased when the hub-nose position moved away from the end of converging cone. The lowest value occurred at the position of -0.5 m. It was concluded that despite the numerically small change in pressure drop, this phenomenon should be considered in the design process of the OWC system because of the operational condition of the system at low-pressure pneumatic power. The pressure drop actually reduces the amount of energy that will be converted by the air turbine. 9 refs., 2 tabs., 6 figs.

  13. EXPERIMENTAL INVESTIGATION & NUMERICAL ANALYSIS OF COMPOSITE LEAF SPRING

    OpenAIRE

    K. K. JADHAO,; DR. R.S DALU

    2011-01-01

    The Automobile Industry has shown keen interest for replacement of steel leaf spring with that of glass fiber composite leaf spring, since the composite material has high strength to weight ratio, good corrosion resistance and tailor-able properties. The objective of present study was to replace material for leaf spring. In present study the material selected was glass fiber reinforced plastic (GFRP) and the polyester resin (NETPOL 1011) can be used which was more economical this will reduce ...

  14. Connectome hubs at resting state in children and adolescents: Reproducibility and psychopathological correlation

    Directory of Open Access Journals (Sweden)

    João Ricardo Sato

    2016-08-01

    Full Text Available Functional brain hubs are key integrative regions in brain networks. Recently, brain hubs identified through resting-state fMRI have emerged as interesting targets to increase understanding of the relationships between large-scale functional networks and psychopathology. However, few studies have directly addressed the replicability and consistency of the hub regions identified and their association with symptoms. Here, we used the eigenvector centrality (EVC measure obtained from graph analysis of two large, independent population-based samples of children and adolescents (7–15 years old; total N = 652; 341 subjects for site 1 and 311 for site 2 to evaluate the replicability of hub identification. Subsequently, we tested the association between replicable hub regions and psychiatric symptoms. We identified a set of hubs consisting of the anterior medial prefrontal cortex and inferior parietal lobule/intraparietal sulcus (IPL/IPS. Moreover, lower EVC values in the right IPS were associated with psychiatric symptoms in both samples. Thus, low centrality of the IPS was a replicable sign of potential vulnerability to mental disorders in children. The identification of critical and replicable hubs in functional cortical networks in children and adolescents can foster understanding of the mechanisms underlying mental disorders.

  15. Connectome hubs at resting state in children and adolescents: Reproducibility and psychopathological correlation.

    Science.gov (United States)

    Sato, João Ricardo; Biazoli, Claudinei Eduardo; Salum, Giovanni Abrahão; Gadelha, Ary; Crossley, Nicolas; Vieira, Gilson; Zugman, André; Picon, Felipe Almeida; Pan, Pedro Mario; Hoexter, Marcelo Queiroz; Anés, Mauricio; Moura, Luciana Monteiro; Del'Aquilla, Marco Antonio Gomes; Junior, Edson Amaro; Mcguire, Philip; Rohde, Luis Augusto; Miguel, Euripedes Constantino; Bressan, Rodrigo Affonseca; Jackowski, Andrea Parolin

    2016-08-01

    Functional brain hubs are key integrative regions in brain networks. Recently, brain hubs identified through resting-state fMRI have emerged as interesting targets to increase understanding of the relationships between large-scale functional networks and psychopathology. However, few studies have directly addressed the replicability and consistency of the hub regions identified and their association with symptoms. Here, we used the eigenvector centrality (EVC) measure obtained from graph analysis of two large, independent population-based samples of children and adolescents (7-15 years old; total N=652; 341 subjects for site 1 and 311 for site 2) to evaluate the replicability of hub identification. Subsequently, we tested the association between replicable hub regions and psychiatric symptoms. We identified a set of hubs consisting of the anterior medial prefrontal cortex and inferior parietal lobule/intraparietal sulcus (IPL/IPS). Moreover, lower EVC values in the right IPS were associated with psychiatric symptoms in both samples. Thus, low centrality of the IPS was a replicable sign of potential vulnerability to mental disorders in children. The identification of critical and replicable hubs in functional cortical networks in children and adolescents can foster understanding of the mechanisms underlying mental disorders.

  16. Incremental Optimization of Hub and Spoke Network for the Spokes’ Numbers and Flow

    Directory of Open Access Journals (Sweden)

    Yanfeng Wang

    2015-01-01

    Full Text Available Hub and spoke network problem is solved as part of a strategic decision making process which may have a profound effect on the future of enterprises. In view of the existing network structure, as time goes on, the number of spokes and the flow change because of different sources of uncertainty. Hence, the incremental optimization of hub and spoke network problem is considered in this paper, and the policy makers should adopt a series of strategies to cope with the change, such as setting up new hubs, adjusting the capacity level of original hubs, or closing some original hubs. The objective is to minimize the total cost, which includes the setup costs for the new hubs, the closure costs, and the adjustment costs for the original hubs as well as the flow routing costs. Two mixed-integer linear programming formulations are proposed and analyzed for this problem. China Deppon Logistics as an example is performed to present computational analysis, and we analyze the changes in the solutions driven by the number of spokes and the flow. The tests also allow an analysis to consider the effect of variation in parameters on network.

  17. A multidomain hub anchors the chromosome segregation and chemotactic machinery to the bacterial pole.

    Science.gov (United States)

    Yamaichi, Yoshiharu; Bruckner, Raphael; Ringgaard, Simon; Möll, Andrea; Cameron, D Ewen; Briegel, Ariane; Jensen, Grant J; Davis, Brigid M; Waldor, Matthew K

    2012-10-15

    The cell poles constitute key subcellular domains that are often critical for motility, chemotaxis, and chromosome segregation in rod-shaped bacteria. However, in nearly all rods, the processes that underlie the formation, recognition, and perpetuation of the polar domains are largely unknown. Here, in Vibrio cholerae, we identified HubP (hub of the pole), a polar transmembrane protein conserved in all vibrios, that anchors three ParA-like ATPases to the cell poles and, through them, controls polar localization of the chromosome origin, the chemotactic machinery, and the flagellum. In the absence of HubP, oriCI is not targeted to the cell poles, chemotaxis is impaired, and a small but increased fraction of cells produces multiple, rather than single, flagella. Distinct cytoplasmic domains within HubP are required for polar targeting of the three ATPases, while a periplasmic portion of HubP is required for its localization. HubP partially relocalizes from the poles to the mid-cell prior to cell division, thereby enabling perpetuation of the polar domain in future daughter cells. Thus, a single polar hub is instrumental for establishing polar identity and organization.

  18. Hubs and authorities in the world trade network using a weighted HITS algorithm.

    Science.gov (United States)

    Deguchi, Tsuyoshi; Takahashi, Katsuhide; Takayasu, Hideki; Takayasu, Misako

    2014-01-01

    We investigate the economic hubs and authorities of the world trade network (WTN) from 1992 to 2012, an era of rapid economic globalization. Using a well-defined weighted hyperlink-induced topic search (HITS) algorithm, we can calculate the values of the weighted HITS hub and authority for each country in a conjugate way. In the context of the WTN, authority values are large for countries with significant imports from large hub countries, and hub values are large for countries with significant exports to high-authority countries. The United States was the largest economic authority in the WTN from 1992 to 2012. The authority value of the United States has declined since 2001, and China has now become the largest hub in the WTN. At the same time, China's authority value has grown as China is transforming itself from the "factory of the world" to the "market of the world." European countries show a tendency to trade mostly within the European Union, which has decreased Europe's hub and authority values. Japan's authority value has increased slowly, while its hub value has declined. These changes are consistent with Japan's transition from being an export-driven economy in its high economic growth era in the latter half of the twentieth century to being a more mature, economically balanced nation.

  19. Hubs and authorities in the world trade network using a weighted HITS algorithm.

    Directory of Open Access Journals (Sweden)

    Tsuyoshi Deguchi

    Full Text Available We investigate the economic hubs and authorities of the world trade network (WTN from 1992 to 2012, an era of rapid economic globalization. Using a well-defined weighted hyperlink-induced topic search (HITS algorithm, we can calculate the values of the weighted HITS hub and authority for each country in a conjugate way. In the context of the WTN, authority values are large for countries with significant imports from large hub countries, and hub values are large for countries with significant exports to high-authority countries. The United States was the largest economic authority in the WTN from 1992 to 2012. The authority value of the United States has declined since 2001, and China has now become the largest hub in the WTN. At the same time, China's authority value has grown as China is transforming itself from the "factory of the world" to the "market of the world." European countries show a tendency to trade mostly within the European Union, which has decreased Europe's hub and authority values. Japan's authority value has increased slowly, while its hub value has declined. These changes are consistent with Japan's transition from being an export-driven economy in its high economic growth era in the latter half of the twentieth century to being a more mature, economically balanced nation.

  20. Spring batch essentials

    CERN Document Server

    Rao, P Raja Malleswara

    2015-01-01

    If you are a Java developer with basic knowledge of Spring and some experience in the development of enterprise applications, and want to learn about batch application development in detail, then this book is ideal for you. This book will be perfect as your next step towards building simple yet powerful batch applications on a Java-based platform.

  1. Energy Matters - Spring 2002

    Energy Technology Data Exchange (ETDEWEB)

    None

    2002-03-01

    Quarterly newsletter from DOE's Industrial Technologies Program to promote the use of energy-efficient industrial systems. The focus of the Spring 2002 Issue of Energy Matters focuses on premium energy efficiency systems, with articles on new gas technologies, steam efficiency, the Augusta Newsprint Showcase, and more.

  2. Renaissance Administrator, Spring 1998.

    Science.gov (United States)

    Dowdy, June P., Ed.

    1998-01-01

    This spring 1998 issue of Renaissance Administrator features the following articles: (1) "Servant Leadership and Higher Education--What is Leadership?" (Richard E. Hasselbach); (2) "Teaching Writing in the 90's--Carnivorous Printers and Dying Grandmothers" (Helen Ruggieri); (3) Assignment--Journal Writing" (Lynn Muscato); and (4) "A Business…

  3. Editors' Spring Picks

    Science.gov (United States)

    Library Journal, 2011

    2011-01-01

    While they do not represent the rainbow of reading tastes American public libraries accommodate, Book Review editors are a wildly eclectic bunch. One look at their bedside tables and ereaders would reveal very little crossover. This article highlights an eclectic array of spring offerings ranging from print books to an audiobook to ebook apps. It…

  4. 合成气中枢%Syngas Hub

    Institute of Scientific and Technical Information of China (English)

    徐恒泳; 葛庆杰; 李文钊

    2011-01-01

    回顾了人类使用化石能源所经历的煤(固体)、石油(液体)和天然气(气体)燃料的3个时期.针对近年来环境安全和能源清洁化日益重要,而化石能源仍占世界能源主要消费结构的现状,提出了“合成气中枢”的新概念.重点介绍了从天然气、煤和生物质等多种原料气化生产合成气并进行组成调变;煤基和天然气基合成气制化学品的差别;合成气的转化利用,特别是在发电和热-电-化学品多联产、制取清洁燃料和烯烃以及制取代用天然气等方面的研究进展并进行了评述.认为合成气中枢将成为连接石油炼制、石油化工、天然气化工和煤化工以及电力行业的桥梁,有利于资源和能量的最佳利用以及CO2减排.%The consumption history of fossil energy sources including coal ( solid), petroleum (liquid) and natural gas (gas) was briefly reviewed. Although the seeking for non-fossil energy sources is becoming urgent due to the more and more serious global warming, the fossil energy sources will still occupy more than 50% of the global energy consumption before 2050. Therefore, the concept of syngas hub was brought forward, and the following aspects were emphasized in this review: syngas production and its composition adjustment, the difference of syngas to chemicals from coal and natural gas, and syngas conversion and utilization. It was thought that the syngas hub will become a bridge which connects petroleum refining, petrochemical industry, natural gas chemical industry, coal chemical industry and electric power industry, and is further beneficial to the low CO2 emission and the optimal utilization of resources and energy sources.

  5. Fish Springs molluscan studies: House and Percy Springs

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes the findings of a limited survey of House and Percy Springs molluscan fauna within Fish Springs National Wildlife Refuge. Various...

  6. On the Popularity of GitHub Applications: A Preliminary Note

    OpenAIRE

    Borges, Hudson; Valente, Marco Tulio; Hora, Andre; Coelho, Jailton

    2015-01-01

    GitHub is the world's largest collection of open source software. Therefore, it is important both to software developers and users to compare and track the popularity of GitHub repositories. In this paper, we propose a framework to assess the popularity of GitHub software, using their number of stars. We also propose a set of popularity growth patterns, which describe the evolution of the number of stars of a system over time. We show that stars tend to correlate with other measures, like for...

  7. Studying Springs in Series Using a Single Spring

    Science.gov (United States)

    Serna, Juan D.; Joshi, Amitabh

    2011-01-01

    Springs are used for a wide range of applications in physics and engineering. Possibly, one of their most common uses is to study the nature of restoring forces in oscillatory systems. While experiments that verify Hooke's law using springs are abundant in the physics literature, those that explore the combination of several springs together are…

  8. Assessing wave energy effects on biodiversity: the wave hub experience.

    Science.gov (United States)

    Witt, M J; Sheehan, E V; Bearhop, S; Broderick, A C; Conley, D C; Cotterell, S P; Crow, E; Grecian, W J; Halsband, C; Hodgson, D J; Hosegood, P; Inger, R; Miller, P I; Sims, D W; Thompson, R C; Vanstaen, K; Votier, S C; Attrill, M J; Godley, B J

    2012-01-28

    Marine renewable energy installations harnessing energy from wind, wave and tidal resources are likely to become a large part of the future energy mix worldwide. The potential to gather energy from waves has recently seen increasing interest, with pilot developments in several nations. Although technology to harness wave energy lags behind that of wind and tidal generation, it has the potential to contribute significantly to energy production. As wave energy technology matures and becomes more widespread, it is likely to result in further transformation of our coastal seas. Such changes are accompanied by uncertainty regarding their impacts on biodiversity. To date, impacts have not been assessed, as wave energy converters have yet to be fully developed. Therefore, there is a pressing need to build a framework of understanding regarding the potential impacts of these technologies, underpinned by methodologies that are transferable and scalable across sites to facilitate formal meta-analysis. We first review the potential positive and negative effects of wave energy generation, and then, with specific reference to our work at the Wave Hub (a wave energy test site in southwest England, UK), we set out the methodological approaches needed to assess possible effects of wave energy on biodiversity. We highlight the need for national and international research clusters to accelerate the implementation of wave energy, within a coherent understanding of potential effects-both positive and negative.

  9. Proof test of hybrid shrink fits with ceramic hub

    Science.gov (United States)

    Wagner, M.; Binz, H.

    2011-10-01

    Advanced ceramic machine components are required in many applications because of their specific material properties like high hardness, resistance to chemicals, corrosion and wear, low specific weight etc. The most suitable shaft-hub connection to ceramics is an interference fit assembly because it is free of geometrical notches and transmission of forces takes place in a large area. Such a shrink fit is rated for endurance strength when the stress intensity factor is below the specific value KI0 where no crack growth occurs. The total component suddenly fails, when the stress intensity factor exceeds the KIC value. The load to the press fit during the joining process, caused by the interference of the assembly, could be regulated by ambient conditions. In case of undetected material defects or microcracks in the ceramic and if the stress intensity is below KIC, the ceramic will not fail but a crack could grow. Thus, the joining process only seems to be a proof test. When the load during operation leads to a stress intensity that remains higher than KI0 the crack grows until the whole ceramic component fails. This effect was verified in tests at the Institute for Engineering Design and Industrial Design.

  10. Proof test of hybrid shrink fits with ceramic hub

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, M; Binz, H, E-mail: markus.wagner@iktd.uni-stuttgart.de [Institute for Engineering Design and Industrial Design, University of Stuttgart (Germany)

    2011-10-29

    Advanced ceramic machine components are required in many applications because of their specific material properties like high hardness, resistance to chemicals, corrosion and wear, low specific weight etc. The most suitable shaft-hub connection to ceramics is an interference fit assembly because it is free of geometrical notches and transmission of forces takes place in a large area. Such a shrink fit is rated for endurance strength when the stress intensity factor is below the specific value K{sub I0} where no crack growth occurs. The total component suddenly fails, when the stress intensity factor exceeds the K{sub IC} value. The load to the press fit during the joining process, caused by the interference of the assembly, could be regulated by ambient conditions. In case of undetected material defects or microcracks in the ceramic and if the stress intensity is below K{sub IC}, the ceramic will not fail but a crack could grow. Thus, the joining process only seems to be a proof test. When the load during operation leads to a stress intensity that remains higher than K{sub I0} the crack grows until the whole ceramic component fails. This effect was verified in tests at the Institute for Engineering Design and Industrial Design.

  11. Modelagem para localização de hubs no transporte de encomendas expressas Modelling for location hubs in the express cargo transport

    Directory of Open Access Journals (Sweden)

    Javier Antonio Timaná Alamo

    2006-12-01

    Full Text Available Na presente pesquisa se propõe um modelo matemático de programação linear com variáveis binárias 0/1, para projetar a configuração de uma rede de distribuição de encomendas expressas, visando minimizar os custos e garantindo um bom nível de serviço. O modelo, que é uma modificação da formulação proposta por O’Kelly, define as posições dos hubs, a alocação deles às demais instalações físicas e a construção de roteiros com apenas uma parada intermediária, o que confere mais agilidade ao atendimento da demanda de transporte de carga. Considera-se a instalação de um único hub maior (Hub Principal, que serve como ponto de transbordo para os fluxos de carga entre as distintas regiões de um território, e um conjunto de terminais regionais (mini-hubs, servindo como ponto de conexão, unicamente, para os fluxos de carga existentes em um determinado raio de cobertura. Foram propostas extensões que incluem uma restrição da capacidade operacional do Hub Principal, para evitar seu congestionamento, e duas diferentes estratégias de induzir o aumento de fluxo de carga manipulado pelos mini-hubs. O modelo proposto e suas extensões foram aplicados ao estudo de um caso real, obtendo-se resultados consistentes e uma redução significativa no custo total da rede de distribuição da empresa analisada.This study proposes a mathematical model of linear programming with binary variables 0/1 to project the configuration of a distribution network for express cargo which aims to minimize costs and guarantee a high level of service. The model, which is a modification of the formulation proposed by O’Kelly, defines the position of the hubs, their allocation regarding the other physical installations, and the building of itineraries with only one intermediate stop, which increases agility in meeting the demand of cargo transport. It assumes the installation of a single, major hub (Main Hub, which serves as the transfer point for

  12. Warm Springs pupfish recovery plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document gives a history of pupfish and focuses on the warm springs pupfish. The warm springs pupfish is endangered, and this is a plan to help recover the...

  13. Hot Spring Metagenomics

    Directory of Open Access Journals (Sweden)

    Olalla López-López

    2013-04-01

    Full Text Available Hot springs have been investigated since the XIX century, but isolation and examination of their thermophilic microbial inhabitants did not start until the 1950s. Many thermophilic microorganisms and their viruses have since been discovered, although the real complexity of thermal communities was envisaged when research based on PCR amplification of the 16S rRNA genes arose. Thereafter, the possibility of cloning and sequencing the total environmental DNA, defined as metagenome, and the study of the genes rescued in the metagenomic libraries and assemblies made it possible to gain a more comprehensive understanding of microbial communities—their diversity, structure, the interactions existing between their components, and the factors shaping the nature of these communities. In the last decade, hot springs have been a source of thermophilic enzymes of industrial interest, encouraging further study of the poorly understood diversity of microbial life in these habitats.

  14. The hub wall boundary layer development and losses in an axial flow compressor rotor passage

    Science.gov (United States)

    Murthy, K. N. S.; Lakshminarayana, B.

    1987-02-01

    The hub wall boundary layer development in a compressor stage including the rotor passage is experimentally investigated. A miniature five-hole probe was employed to measure the hub wall boundary layer inside the inlet guide vane passage, upstream and far downstream of the rotor. The hub wall boundary layer inside the rotor passage was acquired using a rotating miniature five-hole probe. The boundary layer is well behaved upstream and far downstream of the rotor. The migration of the hub wall boundary layer towards the suction surface corner is observed. The limiting streamline angles and static pressure distribution across the stage were also measured. The mean velocity profiles and the integral properties upstream, inside and downstream of the rotor, and the losses are presented and interpreted.

  15. Numerical and Experimental Investigation of Heat Flow in Permanent Magnet Brushless DC Hub Motor

    DEFF Research Database (Denmark)

    Fasil, Muhammed; Plesner, Daniel; Walther, Jens Honore

    2014-01-01

    in the stator. The hub motor construction restricts the available conductive paths for heat dissipation from the stator to the ambient only through the shaft. In contrast to an internal rotor structure, where the stator winding losses are diffused via conduction, here convection plays a major role in loss...... dissipation. Therefore, a LP thermal model with improved convection modelling has been proposed to calculate the temperature of the components inside the hub motor. The developed model is validated with the FE thermal model and the test data. In addition, CFD tools has been used to accurately model...... the internal and the external flow as well as the convective heat transfer of the hub motor. Finally, an optimization study of the hub motor has been carried out using the CFD model to improve heat transfer from the stator....

  16. Collaborative Policy of the Supply-Hub for Assemble-to-Order Systems with Delivery Uncertainty

    Directory of Open Access Journals (Sweden)

    Guo Li

    2014-01-01

    Full Text Available This paper considers the collaborative mechanisms of the Supply-Hub in the Assemble-to-Order system (ATO system hereafter with upstream delivery uncertainty. We first propose a collaborative replenishment mechanism in the ATO system, and construct a replenishment model with delivery uncertainty in use of the Supply-Hub. After transforming the original model into a one-dimensional optimization problem, we derive the optimal assembly quantity and reorder point of each component. In order to enable the Supply-Hub to conduct collaborative replenishment with each supplier, the punishment and reward mechanisms are proposed. The numerical analysis illustrates that service level of the Supply-Hub is an increasing function of both punishment and reward factors. Therefore, by adjusting the two factors, suppliers’ incentives of collaborative replenishment can be significantly enhanced, and then the service level of whole ATO system can be improved.

  17. Puertos, espacio y globalización: el desarrollo de hubs en México

    Directory of Open Access Journals (Sweden)

    Carlos Daniel Martner Peyrelongue

    2010-01-01

    Full Text Available Los puertos hubs se presentan como el nuevo paradigma de desarrollo del transporte y el comercio marítimo internacional en la globalización. Prácticamente todos los países latinoamericanos anuncian megaproyectos para el desarrollo de puertos hubs en sus litorales, generando grandes expectativas de desarrollo regional, con un débil sustento tanto teórico como empírico. En este sentido, el presente trabajo busca contribuir a la caracterización del modelo de puertos hubs en países periféricos dentro de la economíamundo capitalista, aludiendo, en especial, al caso mexicano. Se trata de aportar elementos de análisis para reconocer, a grandes rasgos, las posibilidades del desarrollo de hubs en los litorales mexicanos, desde la perspectiva de los estudios regionales y la geografía del transporte.

  18. Empirical analysis on the human dynamics of blogging behavior on GitHub

    Science.gov (United States)

    Yan, Deng-Cheng; Wei, Zong-Wen; Han, Xiao-Pu; Wang, Bing-Hong

    2017-01-01

    GitHub is a social collaborative coding platform on which software developers not only collaborate on codes but also share knowledge through blogs using GitHub Pages. In this article, we analyze the blogging behavior of software developers on GitHub Pages. The results show that both the commit number and the inter-event time of two consecutive blogging actions follow heavy-tailed distribution. We further observe a significant variety of activity among individual developers, and a strongly positive correlation between the activity and the power-law exponent of the inter-event time distribution. We also find a difference between the user behaviors of GitHub Pages and other online systems which is driven by the diversity of users and length of contents. In addition, our result shows an obvious difference between the majority of developers and elite developers in their burstiness property.

  19. Sci-Hub: What Librarians Should Know and Do about Article Piracy.

    Science.gov (United States)

    Hoy, Matthew B

    2017-01-01

    The high cost of journal articles has driven many researchers to turn to a new way of getting access: "pirate" article sites. Sci-Hub, the largest and best known of these sites, currently offers instant access to more than 58 million journal articles. Users attracted by the ease of use and breadth of the collection may not realize that these articles are often obtained using stolen credentials and downloading them may be illegal. This article will briefly describe Sci-Hub and how it works, the legal and ethical issues it raises, and the problems it may cause for librarians. Librarians should be aware of Sci-Hub and the ways it may change their patrons' expectations. They should also understand the risks Sci-Hub can pose to their patrons and their institutions.

  20. Magnetic Spring Device

    OpenAIRE

    Hassam, A. B.; Rodgers, J. C.

    2009-01-01

    A cylindrical system is proposed that will store magnetic energy in a localized azimuthal field that can then be quickly released on Alfvenic timescales, accompanied by the formation of a flowing Z-pinch plasma. The magnetized plasma is MHD in character and will have unilateral axial momentum with Alfvenic speeds. Conventional plasma gun injectors (Marshall type) have a limited parameter space of operation. The "magnetic spring" momentum injector differs from Marshall guns in that it has an a...

  1. A Dynamic Calibration Method for Experimental and Analytical Hub Load Comparison

    Science.gov (United States)

    2017-03-01

    ARL-RP-0592 ● Mar 2017 US Army Research Laboratory A Dynamic Calibration Method for Experimental and Analytical Hub Load Comparison by Robert P... A Dynamic Calibration Method for Experimental and Analytical Hub Load Comparison by Robert P Thornburgh, Andrew R Kreshock, and Matthew L...other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a

  2. Numerical simulation and experimental study for the die forging process of a high-speed railway brake disc hub

    Science.gov (United States)

    Sun, Mingyue; Xu, Bin; Zhang, Long; LI, Dianzhong

    2013-05-01

    With the aim of manufacturing a near-net shape forging product of a brake disk hub for the high-speed railway, the die forging process was designed and optimized in this study. Firstly, based on the measured stress-strain curves at different strain rates and the thermal-physical parameters of 40Cr A steel, a finite element model for the forging process of a high-speed railway brake disc hub was established. Then, the temperature, stress and strain fields were studied and analyzed at the pre-forging and the finial-forging stages. Besides, in order to trace the stress and strain evolution, five points at different positions were chosen on the billet, and the comparison of the state conditions was made among these points. The results have demonstrated that the product can be well formed by an elaborately designed three-stage forging process, which may reduce the metal machine allowance and the producing cost effectively. Finally, an industrial trial was made and a machined product with sound quality was obtained.

  3. A novel virtual hub approach for multisource downstream service integration

    Science.gov (United States)

    Previtali, Mattia; Cuca, Branka; Barazzetti, Luigi

    2016-08-01

    A large development of downstream services is expected to be stimulated starting from earth observations (EO) datasets acquired by Copernicus satellites. An important challenge connected with the availability of downstream services is the possibility for their integration in order to create innovative applications with added values for users of different categories level. At the moment, the world of geo-information (GI) is extremely heterogeneous in terms of standards and formats used, thus preventing a facilitated access and integration of downstream services. Indeed, different users and data providers have also different requirements in terms of communication protocols and technology advancement. In recent years, many important programs and initiatives have tried to address this issue even on trans-regional and international level (e.g. INSPIRE Directive, GEOSS, Eye on Earth and SEIS). However, a lack of interoperability between systems and services still exists. In order to facilitate the interaction between different downstream services, a new architectural approach (developed within the European project ENERGIC OD) is proposed in this paper. The brokering-oriented architecture introduces a new mediation layer (the Virtual Hub) which works as an intermediary to bridge the gaps linked to interoperability issues. This intermediation layer de-couples the server and the client allowing a facilitated access to multiple downstream services and also Open Data provided by national and local SDIs. In particular, in this paper an application is presented integrating four services on the topic of agriculture: (i) the service given by Space4Agri (providing services based on MODIS and Landsat data); (ii) Gicarus Lab (providing sample services based on Landsat datasets) and (iii) FRESHMON (providing sample services for water quality) and services from a several regional SDIs.

  4. NGC 281: A Bustling Hub of Star Formation

    Science.gov (United States)

    2005-01-01

    NGC 281 is a bustling hub of star formation about 10,000 light years away. This composite image of optical and X-ray emission includes regions where new stars are forming and older regions containing stars about 3 million years old. The optical data (seen in red, orange, and yellow) show a small open cluster of stars, large lanes of obscuring gas and dust, and dense knots where stars may still be forming. The X-ray data (purple), based on a Chandra observation lasting more than a day, shows a different view. More than 300 individual X-ray sources are seen, most of them associated with IC 1590, the central cluster. The edge-on aspect of NGC 281 allows scientists to study the effects of powerful X-rays on the gas in the region, the raw material for star formation. A second group of X-ray sources is seen on either side of a dense molecular cloud, known as NGC 281 West, a cool cloud of dust grains and gas, much of which is in the form of molecules. The bulk of the sources around the molecular cloud are coincident with emission from polycyclic aromatic hydrocarbons, a family of organic molecules containing carbon and hydrogen. There also appears to be cool diffuse gas associated with IC 1590 that extends toward NGC 281 West. The X-ray spectrum of this region shows that the gas is a few million degrees and contains significant amounts of magnesium, sulfur and silicon. The presence of these elements suggests that supernova recently went off in that area.

  5. A Multi-Objective, Hub-and-Spoke Supply Chain Design Model for Densified Biomass

    Energy Technology Data Exchange (ETDEWEB)

    Jacob J. Jacobson; Md. S. Roni; Kara G. Cafferty; Sandra D. Eksioglu

    2014-06-01

    In this paper we propose a model to design the supply chain for densified biomass. Rail is typically used for longhaul, high-volume shipment of densified biomass. This is the reason why a hub-and-spoke network structure is used to model this supply chain. The model is formulated as a multi-objective, mixed-integer programing problem under economic, environmental, and social criteria. The goal is to identify the feasibility of meeting the Renewable Fuel Standard (RFS) by using biomass for production of cellulosic ethanol. The focus is not just on the costs associated with meeting these standards, but also exploring the social and environmental benefits that biomass production and processing offers by creating new jobs and reducing greenhouse gas (GHG) emissions. We develop an augmented ?-constraint method to find the exact Pareto solution to this optimization problem. We develop a case study using data from the Mid-West. The model identifies the number, capacity and location of biorefineries needed to make use of the biomass available in the region. The model estimates the delivery cost of cellulosic ethanol under different scenario, the number new jobs created and the GHG emission reductions in the supply chain.

  6. A Multi-Objective, Hub-and-Spoke Supply Chain Design Model For Densified Biomass

    Energy Technology Data Exchange (ETDEWEB)

    Md S. Roni; Sandra Eksioglu; Kara G. Cafferty

    2014-06-01

    In this paper we propose a model to design the supply chain for densified biomass. Rail is typically used for long-haul, high-volume shipment of densified biomass. This is the reason why a hub-and-spoke network structure is used to model this supply chain. The model is formulated as a multi-objective, mixed-integer programing problem under economic, environmental, and social criteria. The goal is to identify the feasibility of meeting the Renewable Fuel Standard (RFS) by using biomass for production of cellulosic ethanol. The focus in not just on the costs associated with meeting these standards, but also exploring the social and environmental benefits that biomass production and processing offers by creating new jobs and reducing greenhouse gas (GHG) emissions. We develop an augmented ?-constraint method to find the exact Pareto solution to this optimization problem. We develop a case study using data from the Mid-West. The model identifies the number, capacity and location of biorefineries needed to make use of the biomass available in the region. The model estimates the delivery cost of cellulosic ethanol under different scenario, the number new jobs created and the GHG emission reductions in the supply chain.

  7. Analysis of Composite Leaf Spring Enhanced With Nanoparticles

    Directory of Open Access Journals (Sweden)

    K. Ganesan

    2015-12-01

    Full Text Available Weight reduction is now the main issue in automobile industries. In this work due to reduce the weight of steel spring with composite leaf spring due to high strength ratio is need to improve. The main aim is to compare to the load carrying capacity, stiffness and weight savings of composite leaf spring with that of steel leaf spring at rated-load and over-load condition. The analysis has been carried out for the leaf spring made up of steel and Composite materials. Composite specimens are fabricated with two different staking sequences like the (resin with clay and enhanced with Nanoparticles. The thickness and width for constant cross section is maintained on the moulding techniques. The design of multi leaf spring was modeled in PRO-E and imported in ANSYS 14.5.the dimensions of an existing multi leaf spring is taken for modeling and analysis of a laminated composite multi leaf spring with different composite sequence materials subjected to the same load as that of steel spring.

  8. A wearable robotic orthosis with a spring-assist actuator.

    Science.gov (United States)

    Seungmin Jung; Chankyu Kim; Jisu Park; Dongyoub Yu; Jaehwan Park; Junho Choi

    2016-08-01

    This paper introduces a wearable robotic orthosis with spring-assist actuators, which is designed to assist people who have difficulty in walking. The spring-assist actuator consists of an electrical motor and a spring, which are attached to a rotational axis in parallel to each other. The spring-assist actuator is developed based on the analysis on the stiffness of the knee and hip joints during walking. "COWALK-Mobile," which is a wearable robotic orthosis, is developed using the spring-assist actuators to reduce the required motor torque during walking. The COWALK-Mobile has active hip and knee joints and passive ankle joints to provide assistive torque to the wearer. The required joint torque is generated by the spring as well as the electrical motor, which results in a decrease of maximum required torque for the motor. In order to evaluate the performance of the spring-assist actuator, experiments are carried out. The experiments show that the spring-assist actuators reduced the required motor torque during walking.

  9. Disrupted nodal and hub organization account for brain network abnormalities in Parkinson’s disease

    Directory of Open Access Journals (Sweden)

    Yuko Koshimori

    2016-11-01

    Full Text Available The recent application of graph theory to brain networks promises to shed light on complex diseases such as Parkinson’s disease. This study aimed to investigate functional changes in sensorimotor and cognitive networks in parkinsonian patients, with a focus on inter- and intra-connectivity organization in the disease-associated nodal and hub regions using the graph theoretical analyses. Resting-state functional MRI data of a total of 65 participants, including 23 healthy controls and 42 patients, were investigated in 120 nodes for local efficiency, betweenness centrality, and degree. Hub regions were identified in the healthy control and patient groups. We found nodal and hub changes in patients compared with healthy controls, including the right pre-supplementary motor area, left anterior insula, bilateral mid-insula, bilateral dorsolateral prefrontal cortex, and right caudate nucleus. In general, nodal regions within the sensorimotor network (i.e. right pre-supplementary motor area and right mid-insula displayed weakened connectivity, with the former node associated with more severe bradykinesia, and impaired integration with default mode network regions. The left mid-insula also lost its hub properties in patients. Within the executive networks, the left anterior insular cortex lost its hub properties in patients, while a new hub region was identified in the right caudate nucleus, paralleled by an increased level of inter- and intra-connectivity in the bilateral dorsolateral prefrontal cortex possibly representing compensatory mechanisms. These findings highlight the diffuse changes in nodal organization and regional hub disruption accounting for the distributed abnormalities across brain networks and the clinical manifestations of Parkinson’s disease.

  10. Measuring Improvement when Using HUB Formats to Implement Floating-Point Systems under Round-to-Nearest

    OpenAIRE

    Hormigo, Javier; Julio, Villalba

    2016-01-01

    This paper analyzes the benefits of using HUB formats to implement floating-point arithmetic under round-tonearest mode from a quantitative point of view. Using HUB formats to represent numbers allows the removal of the rounding logic of arithmetic units, including sticky-bit computation. This is shown for floating-point adders, multipliers, and converters. Experimental analysis demonstrates that HUB formats and the corresponding arithmetic units maintain the same accurac...

  11. The application of design criteria for locating a hub configured supply chain for a restaurant cluster in the Stellenbosch area

    Directory of Open Access Journals (Sweden)

    Claudia B. Struwig

    2013-05-01

    Full Text Available Restaurants, in general, utilise numerous suppliers. Normally they deliver on different days in the week and at different times during the day, logistically not an optimum approach. Not only does the current practice cause frequent interruptions, but by segregating the food supply chain unnecessary traffic is generated. This article investigated the need for developing a third party supplier hub, the best positioning of that hub and the most economical routes to the customers. With the aim of providing non-franchised restaurants with the necessary leverage to become market leaders, the hub is planned to only service the restaurants within the vicinity of the Stellenbosch area. In such a hub-configured supply chain, the suppliers would be delivering to the proposed hub, from where once-off deliveries to all the restaurants may be made on days and/or times determined by them. In order to investigate the benefits of providing such a hub structure, a systematic implementation approach was used. The first step was to do market research in order to establish the need for such a hub. That is, the viability of the hub from a restaurant’s perspective was established. The next step entailed the investigation of the design criteria needed in determining a favourable hub location. Four possible hub locations were identified. The Clark and Wright’s savings algorithm was then used to determine the optimal hub location and the feasibility of the results was verified with the aid of a global positioning system (GPS device. The last steps followed involved the determination of an effective hub floor plan that may be utilised, possible products that can be supplied to the restaurants and the necessary assets needed to provide the hub’s service. Finally, by incorporating all these facets, a cost analysis was done to determine the hub’s profitability.

  12. Final Report for Project: Impacts of stratification and non-equilibrium winds and waves on hub-height winds

    Energy Technology Data Exchange (ETDEWEB)

    Patton, Edward G. [Univ. Corporation for Atmospheric Research, Boulder, CO (United States)

    2015-07-14

    wind plant scale. Overall project conclusions include; In the presence of fast-moving swell (significant wave height Hs = 6.4 m, and phase speed cp = 18 ms-1), the atmospheric boundary layer grows more rapidly when waves propagate opposite to the winds compared to when winds and waves are aligned. Pressure drag increases by nearly a factor of 2 relative to the turbulent stress for the extreme case where waves propagate at 180° compared to the pressure gradient forcing. Net wind speed reduces by nearly 15% at hub-height for the 180°-case compared to the 0°-case, and turbulence intensities increase by nearly a factor of 2. These impacts diminish with decreasing wave age; Stratification increases hub height wind speeds and increases the vertical shear of the mean wind across the rotor plane. Fortuitously, this stability-induced enhanced shear does not influence turbulence intensity at hub height, but does increase (decrease) turbulence intensity below (above) hub height. Increased stability also increases the wave-induced pressure stress by ~ 10%; Off the East Coast of the United States during Coupled Boundary Layers Air-Sea Transfer - Low Wind (CBLAST-Low), cases with short fetch include thin stable boundary layers with depths of only a few tens of meters. In the coastal zone, the relationship between the mean wind and the surface fiction velocity (u*(V )) is significantly related to wind direction for weak winds but is not systematically related to the air sea difference of virtual potential temperature, δθv; since waves generally propagate from the south at the Air-Sea Interaction Tower (ASIT) tower, these results suggest that under weak wind conditions waves likely influence surface stress more than stratification does; and Winds and waves are frequently misaligned in the coastal zone. Stability conditions persist for long duration. Over a four year period, the Forschungsplattformen in Nord- und Ostsee Nr. 1 (FINO1) tower (a site with long fetch

  13. Developing bulk exchange spring magnets

    Energy Technology Data Exchange (ETDEWEB)

    Mccall, Scott K.; Kuntz, Joshua D.

    2017-06-27

    A method of making a bulk exchange spring magnet by providing a magnetically soft material, providing a hard magnetic material, and producing a composite of said magnetically soft material and said hard magnetic material to make the bulk exchange spring magnet. The step of producing a composite of magnetically soft material and hard magnetic material is accomplished by electrophoretic deposition of the magnetically soft material and the hard magnetic material to make the bulk exchange spring magnet.

  14. Several Moments of the Spring

    Institute of Scientific and Technical Information of China (English)

    毛竹晨

    2003-01-01

    Spring has finally fallen on Cambridge. After a long, wet and dark winter, sky finally brightens up. The first messenger of spring is the daffodil (水仙花). English daffodils are slightly different from the Chinese ones that we are all familiar with. First of all, they bloom in spring, not in winter as the Chinese daffodils do. Second, they do not grow in water, but on the ground, though they

  15. Understanding farmers' preferences for artificial insemination services provided through dairy hubs.

    Science.gov (United States)

    Omondi, I A; Zander, K K; Bauer, S; Baltenweck, I

    2017-04-01

    Africa has a shortage of animal products but increasing demand because of population growth, urbanisation and changing consumer patterns. Attempts to boost livestock production through the use of breeding technologies such as artificial insemination (AI) have been failing in many countries because costs have escalated and success rates have been relatively low. One example is Kenya, a country with a relatively large number of cows and a dairy industry model relevant to neighbouring countries. There, an innovative dairy marketing approach (farmer-owned collective marketing systems called dairy hubs) has been implemented to enhance access to dairy markets and dairy-related services, including breeding services such as AI. So far, the rate of participation in these dairy hubs has been slow and mixed. In order to understand this phenomenon better and to inform dairy-related development activities by the Kenyan government, we investigated which characteristics of AI services, offered through the dairy hubs, farmers prefer. To do so, we applied a choice experiment (CE), a non-market valuation technique, which allowed us to identify farmers' preferences for desired characteristics should more dairy hubs be installed in the future. This is the first study to use a CE to evaluate breeding services in Kenya and the results can complement findings of studies of breeding objectives and selection criteria. The results of the CE reveal that dairy farmers prefer to have AI services offered rather than having no service. Farmers prefer AI services to be available at dairy hubs rather than provided by private agents not affiliated to the hubs, to have follow-up services for pregnancy detections, and to use sexed semen rather than conventional semen. Farmers would further like some flexibility in payment systems which include input credit, and are willing to share the costs of any AI repeats that may need to occur. These results provide evidence of a positive attitude to AI services

  16. Spring viremia of carp

    Science.gov (United States)

    Ahne, W.; Bjorklund, H.V.; Essbauer, S.; Fijan, N.; Kurath, G.; Winton, J.R.

    2002-01-01

    pring viremia of carp (SVC) is an important disease affecting cyprinids, mainly common carp Cyprinus carpio. The disease is widespread in European carp culture, where it causes significant morbidity and mortality. Designated a notifiable disease by the Office International des Epizooties, SVC is caused by a rhabdovirus, spring viremia of carp virus (SVCV). Affected fish show destruction of tissues in the kidney, spleen and liver, leading to hemorrhage, loss of water-salt balance and impairment of immune response. High mortality occurs at water temperatures of 10 to 17°C, typically in spring. At higher temperatures, infected carp develop humoral antibodies that can neutralize the spread of virus and such carp are protected against re-infection by solid immunity. The virus is shed mostly with the feces and urine of clinically infected fish and by carriers. Waterborne transmission is believed to be the primary route of infection, but bloodsucking parasites like leeches and the carp louse may serve as mechanical vectors of SVCV. The genome of SVCV is composed of a single molecule of linear, negative-sense, single-stranded RNA containing 5 genes in the order 3¹-NPMGL-5¹ coding for the viral nucleoprotein, phosphoprotein, matrix protein, glycoprotein, and polymerase, respectively. Polyacrylamide gel electrophoresis of the viral proteins, and sequence homologies between the genes and gene junctions of SVCV and vesicular stomatitis viruses, have led to the placement of the virus as a tentative member of the genus Vesiculovirus in the family Rhabdoviridae. These methods also revealed that SVCV is not related to fish rhabdoviruses of the genus Novirhabdovirus. In vitro replication of SVCV takes place in the cytoplasm of cultured cells of fish, bird and mammalian origin at temperatures of 4 to 31°C, with an optimum of about 20°C. Spring viremia of carp can be diagnosed by clinical signs, isolation of virus in cell culture and molecular methods. Antibodies directed

  17. TYPE PROJECTS HUB - AN INTERNATIONAL MODEL OF DEVELOPMENT OF THE ENTREPRENEURIAL ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Rozalia Nistor

    2014-06-01

    Full Text Available Impact Hub is a global network of local spaces and communities designed to facilitate sustainable impact through collaboration. Local Impact Hubs are autonomous companies that offer co-working spaces, programming, events platforms, and communities of individuals and organizations with ideas to build a better world. Hub was established in 2005 in London with the aim of creating a space dedicated to inspire, connect and enable people to achieve a sustainable entrepreneurial idea. The idea was simple: There are a lot of people with good ideas for a "better world". What seem to be missing are places to help these people to move from intent to action and to find like-minded for a greater impact. In Romania about four years ago, first opened in Bucharest office space hubs in Romania (for entrepreneurs in technology and business where teams from different companies could collaborate. The idea to open a hub in Bucharest focused on social innovation and entrepreneurship appeared some time ago in the context in which part of the team now has worked since 2010 at the initiation and growth of a community to support social entrepreneurship. In all this diversity, there is a common mission: “we can create if we put all our innovation capacity in the common goal to create a positive impact through our work?”

  18. nanoHUB.org: Experiences and Challenges in Software Sustainability for a Large Scientific Community

    Directory of Open Access Journals (Sweden)

    Lynn Zentner

    2014-07-01

    Full Text Available The science gateway nanoHUB.org, funded by the National Science Foundation (NSF, serves a large scientific community dedicated to research and education in nanotechnology with community-contributed simulation codes as well as a vast repository of other materials such as recorded presentations, teaching materials, and workshops and courses. Nearly 330,000 users annually access over 4400 items of content on nanoHUB, including 343 simulation tools. Arguably the largest nanotechnology facility in the world, nanoHUB has led the way not only in providing open access to scientific code in the nanotechnology community, but also in lowering barriers to the use of that code, by providing a platform where developers are able to easily and quickly deploy code written in a variety of languages with user-friendly graphical user interfaces and where users can run the latest versions of codes transparently on the grid or other powerful resources without ever having to download or update code. Being a leader in open access code deployment provides nanoHUB with opportunities and challenges as it meets the current and future needs of its community. This paper discusses the experiences of nanoHUB in addressing and adapting to the changing landscape of scientific software in ways that best serve its community and meet the needs of the largest portion of its user base.

  19. Forecasting Beijing Transportation Hub Areas’s Pedestrian Flow Using Modular Neural Network

    Directory of Open Access Journals (Sweden)

    Shuwei Wang

    2015-01-01

    Full Text Available Along with the increasing proportion of urban public transportation trip, pedestrian flow in transportation hub areas increased. For effectively improving the emergency handling ability of related management apartments and preventing the incident of pedestrian congestion, this paper studied the method of pedestrian flow forecast in Beijing transportation hub areas. Firstly, 34 typical sidewalks in Beijing transportation hub areas were surveyed to obtain 2200 valid data. Secondly, correlation analysis was used to analyze the relationship between pedestrian flow and its influential factors. 11 significant influential factors were extracted. Thirdly, forecasting model was established with modular neural network. The surveyed pedestrian flow sample was fuzzy clustered according to the regional land use where the transportation hub existed. Then, membership function based on the distance measure was constructed. Through fuzzy discrimination, online selection for the subnetwork of the information can be achieved. Consequently, the self-adaptation of the neural network on information processing was improved. Finally, this paper tested the pedestrian flow sample of a transportation hub in Beijing. It was concluded that the accuracy of pedestrian flow forecasting model using modular neural network was higher than other neural network models. There was also improvement in the adaptability to environment.

  20. Spring security 3.x cookbook

    CERN Document Server

    Mankale, Anjana

    2013-01-01

    This book follows a cookbook style exploring various security solutions provided by Spring Security for various vulnerabilities and threat scenarios that web applications may be exposed to at the authentication and session level layers.This book is for all Spring-based application developers as well as Java web developers who wish to implement robust security mechanisms into web application development using Spring Security.Readers are assumed to have a working knowledge of Java web application development, a basic understanding of the Spring framework, and some knowledge of the fundamentals o

  1. Large springs of east Tennessee

    Science.gov (United States)

    Sun, Pao-chang P.; Criner, J.H.; Poole, J.L.

    1963-01-01

    Springs constitute an important source of water in east Tennessee, and many individual springs are capable of supplying the large quantities needed for municipal and industrial supplies. Most of the springs in east Tennessee issue from solution openings and fractured and faulted zones in limestone and dolomite of the Knox Group, Chickamauga Limestone, and Conasauga Group. The ability of these rocks to yield a sustained flow of water to springs is dependent on a system of interconnected openings through which water can infiltrate from the land surface and move to points of natural discharge. Ninety springs were selected for detailed study, and 84 of these are analyzed in terms of magnitude and variability of discharge. Of the 84 springs analyzed, 4 flow at an average rate of 10 to 100 cfs (cubic feet per second), 62 at an average rate of 1 to 10 cfs, and 18 at an average rate of 1 cfs or less. Of the 90 springs, 75 are variable in their discharge; that is, the ratio of their fluctuations to their average discharges exceeds 100 percent. Mathematical analysis of the flow recession curve of Mill Spring near Jefferson City shows that the hydrologic system contributing to the flow of the spring has an effective capacity of about 70 million cubic feet of water. The rate of depletion of this volume of water, in the absence of significant precipitation, averages 0.0056 cfs per day between the time when the hydrologic system is full and the time when the spring ceases to flow. From such a curve it is possible to determine at any time the residual volume of water remaining in the system and the expected rate of decrease in discharge from that time to cessation of flow. Correlation of discharge measurements of 22 springs with those of Mill Spring shows that rough approximations of discharge can be projected for springs for which few measurements are available. Seventeen of the springs analyzed in this manner show good correlation with Mill Spring: that is, their coefficients

  2. The influence of hubs in the structure of a neuronal network during an epileptic seizure

    Science.gov (United States)

    Rodrigues, Abner Cardoso; Cerdeira, Hilda A.; Machado, Birajara Soares

    2016-02-01

    In this work, we propose changes in the structure of a neuronal network with the intention to provoke strong synchronization to simulate episodes of epileptic seizure. Starting with a network of Izhikevich neurons we slowly increase the number of connections in selected nodes in a controlled way, to produce (or not) hubs. We study how these structures alter the synchronization on the spike firings interval, on individual neurons as well as on mean values, as a function of the concentration of connections for random and non-random (hubs) distribution. We also analyze how the post-ictal signal varies for the different distributions. We conclude that a network with hubs is more appropriate to represent an epileptic state.

  3. Identifying overlapping communities as well as hubs and outliers via nonnegative matrix factorization.

    Science.gov (United States)

    Cao, Xiaochun; Wang, Xiao; Jin, Di; Cao, Yixin; He, Dongxiao

    2013-10-21

    Community detection is important for understanding networks. Previous studies observed that communities are not necessarily disjoint and might overlap. It is also agreed that some outlier vertices participate in no community, and some hubs in a community might take more important roles than others. Each of these facts has been independently addressed in previous work. But there is no algorithm, to our knowledge, that can identify these three structures altogether. To overcome this limitation, we propose a novel model where vertices are measured by their centrality in communities, and define the identification of overlapping communities, hubs, and outliers as an optimization problem, calculated by nonnegative matrix factorization. We test this method on various real networks, and compare it with several competing algorithms. The experimental results not only demonstrate its ability of identifying overlapping communities, hubs, and outliers, but also validate its superior performance in terms of clustering quality.

  4. Synchronization and long-time memory in neural networks with inhibitory hubs and synaptic plasticity

    Science.gov (United States)

    Bertolotti, Elena; Burioni, Raffaella; di Volo, Matteo; Vezzani, Alessandro

    2017-01-01

    We investigate the dynamical role of inhibitory and highly connected nodes (hub) in synchronization and input processing of leaky-integrate-and-fire neural networks with short term synaptic plasticity. We take advantage of a heterogeneous mean-field approximation to encode the role of network structure and we tune the fraction of inhibitory neurons fI and their connectivity level to investigate the cooperation between hub features and inhibition. We show that, depending on fI, highly connected inhibitory nodes strongly drive the synchronization properties of the overall network through dynamical transitions from synchronous to asynchronous regimes. Furthermore, a metastable regime with long memory of external inputs emerges for a specific fraction of hub inhibitory neurons, underlining the role of inhibition and connectivity also for input processing in neural networks.

  5. Nonlinear Dynamic Analysis of Functionally Graded Timoshenko Beam fixed to a Rotating Hub

    Science.gov (United States)

    Panigrahi, B.; Pohit, G.

    2016-08-01

    The present work accounts centrifugal stiffening effect on the nonlinear vibration response of an FGM Timoshenko beam. Analysis is carried out for a cantilever beam fixed with a rotating hub. Material is assumed to have a gradation relation along the depth of the beam. Centrifugal force and axial displacement raised due to the rotating hub is incorporated in the strain energy equations. Subsequent to this, an iterative technique is employed to obtain amplitude dependent vibration response of a rotating Timoshenko beam while material follows a gradation relation along the beam depth. Main objective of the work is to obtain the effects of rotational speeds, hub radius, and different gradation relations on the linear as well as nonlinear frequencies and mode shapes.

  6. Thermal Springs and the Search for Past Life on Mars

    Science.gov (United States)

    DesMarais, D. J.; Farmer, J. D.; Walter, M. R.

    1995-01-01

    Ancient thermal spring sites have several features which make them significant targets in a search for past life. Chemical (including redox) reactions in hydrothermal systems possibly played a role in the origin of life on Earth and elsewhere. Spring waters frequently contain reduced species (sulfur compounds, Fe(sup +2), etc.) which can provide chemical energy for organic synthesis. Relatively cool hydrothermal systems can sustain abundant microbial life (on Earth, at temperatures greater than 110 C). A spring site on Mars perhaps might even have maintained liquid water for periods sufficiently long to sustain surface-dwelling biota had they existed. On Earth, a variety of microbial mat communities can be sampled along the wide range of temperatures surrounding the spring, thus offering an opportunity to sample a broad biological diversity. Thermal spring waters frequently deposit minerals (carbonates, silica, etc.) which can entomb and preserve both fluid inclusions and microbial communities. These deposits can be highly fossiliferous and preserve biological inclusions for geologically long periods of time. Such deposits can cover several square km on Earth, and their distinctive mineralogy (e.g., silica- and/or carbonate-rich) can contrast sharply with that of the surrounding region. As with Martian volcanoes, Martian thermal spring complexes and their deposits might typically be much larger than their counterparts on Earth. Thus Martian spring deposits are perhaps readily detectable and even accessible. Elysium Planitia is an example of a promising region where hydrothermal activity very likely remobilized ground ice and sustained springs.

  7. Characterization of protein hubs by inferring interacting motifs from protein interactions.

    Directory of Open Access Journals (Sweden)

    Ramon Aragues

    2007-09-01

    Full Text Available The characterization of protein interactions is essential for understanding biological systems. While genome-scale methods are available for identifying interacting proteins, they do not pinpoint the interacting motifs (e.g., a domain, sequence segments, a binding site, or a set of residues. Here, we develop and apply a method for delineating the interacting motifs of hub proteins (i.e., highly connected proteins. The method relies on the observation that proteins with common interaction partners tend to interact with these partners through a common interacting motif. The sole input for the method are binary protein interactions; neither sequence nor structure information is needed. The approach is evaluated by comparing the inferred interacting motifs with domain families defined for 368 proteins in the Structural Classification of Proteins (SCOP. The positive predictive value of the method for detecting proteins with common SCOP families is 75% at sensitivity of 10%. Most of the inferred interacting motifs were significantly associated with sequence patterns, which could be responsible for the common interactions. We find that yeast hubs with multiple interacting motifs are more likely to be essential than hubs with one or two interacting motifs, thus rationalizing the previously observed correlation between essentiality and the number of interacting partners of a protein. We also find that yeast hubs with multiple interacting motifs evolve slower than the average protein, contrary to the hubs with one or two interacting motifs. The proposed method will help us discover unknown interacting motifs and provide biological insights about protein hubs and their roles in interaction networks.

  8. Hub vortex instability and wake dynamics in axial flow wind turbines

    Science.gov (United States)

    Foti, Daniel; Howard, Kevin; Yang, Xiaolei; Guala, Michele; Sotiropoulos, Fotis

    2014-11-01

    The near wake region of an axial flow wind turbine has two distinct shear layers: an outer tip vortex shear layer, which rotates in the same direction as the rotor, and an inner counter-rotating hub vortex shear layer. Recent simulations (Kang et al., J. Fluid Mech. 744, 376 (2014)), corroborated with experiments (Chamorro et al., J. Fluid Mech. 716, 658 (2013)), showed that the hub vortex can undergo spiral vortex breakdown immediately downstream of the turbine. The precessing hub vortex core intercepts and interacts with the tip vortex shear layer causing the large-scale wake meandering motions in the far wake to intensify. These results were obtained for an axial flow hydrokinetic turbine in a turbulent open channel flow. Here we integrate high-resolution LES with experiments to show that a hub vortex instability also occurs in the near wake of a wind turbine in a wind tunnel. We show that the interactions of the hub vortex with the outer flow have significant effects on the wake meandering amplitude and frequency. Our results reinforce the conclusions of Kang et al. (2014) that the hub vortex must be included in wake models to simulate wake interactions at the power plant scale and optimize turbine siting for realistic terrain and wind conditions. This work was supported by DOE (DE-EE0002980, DE-EE0005482 and DE-AC04-94AL85000), the NSF (IIP-1318201), the IREE early career award (UMN) and NSF CAREER: Geophysical Flow Control (CBET-1351303). Computational resources were provided by MSI.

  9. Experimenting with Inexpensive Plastic Springs

    Science.gov (United States)

    Perez, Leander; Marques, Adriana; Sánchez, Iván

    2014-01-01

    Acommon undergraduate laboratory experience is the determination of the elastic constant of a spring, whether studying the elongation under a static load or studying the damped harmonic motion of the spring with a suspended mass. An alternative approach to this laboratory experience has been suggested by Menezes et al., aimed at studying the…

  10. Hub vortex instability within wind turbine wakes: Effects of wind turbulence, loading conditions, and blade aerodynamics

    Science.gov (United States)

    Ashton, Ryan; Viola, Francesco; Camarri, Simone; Gallaire, Francois; Iungo, Giacomo Valerio

    2016-11-01

    The near wake of wind turbines is characterized by the presence of the hub vortex, which is a coherent vorticity structure generated from the interaction between the root vortices and the boundary layer evolving over the turbine nacelle. By moving downstream, the hub vortex undergoes an instability with growth rate, azimuthal and axial wavenumbers determined by the characteristics of the incoming wind and turbine aerodynamics. Thus, a large variability of the hub vortex instability is expected for wind energy applications with consequent effects on wake downstream evolution, wake interactions within a wind farm, power production, and fatigue loads on turbines invested by wakes generated upstream. In order to predict characteristics of the hub vortex instability for different operating conditions, linear stability analysis is carried out by considering different statistics of the incoming wind turbulence, thrust coefficient, tip speed ratio, and blade lift distribution of a wind turbine. Axial and azimuthal wake velocity fields are modeled through Carton-McWilliams velocity profiles by mimicking the presence of the hub vortex, helicoidal tip vortices, and matching the wind turbine thrust coefficient predicted through the actuator disk model. The linear stability analysis shows that hub vortex instability is strongly affected by the wind turbine loading conditions, and specifically it is promoted by a larger thrust coefficient. A higher load of the wind turbines produces an enhanced axial velocity deficit and, in turn, higher shear in the radial direction of the streamwise velocity. The axial velocity shear within the turbine wake is also the main physical mechanism promoting the hub vortex instability when varying the lift distribution over the blade span for a specific loading condition. Cases with a larger velocity deficit in proximity of the wake center and less aerodynamic load towards the blade tip result to be more unstable. Moreover, wake swirl promotes hub

  11. Japanese Forwarders’ Local Import Hub in Asia: 3PL Power and Environmental Improvement

    Directory of Open Access Journals (Sweden)

    Kunio MIYASHITA

    2015-09-01

    Full Text Available The purpose of this paper is to demonstrate by an econometric method which countries or regions in Asia are superior import hubs for Japan based on two axes, the third party logistics (3PL business power of Japanese local forwarders and the logistical environment catch-up speed of these countries. According to the estimated results, this simple model can explain the structural changes in China's logistics based on its WTO accession and can develop Japanese forwarders’ stable import hub ranking by suggesting total optimization in the East Asian NIES (newly industrial economies and the ASEAN (Association of Southeast Asian Countries districts by Japanese forwarders.

  12. Single wheel hub motor failures and their impact on vehicle and driver behaviour

    Science.gov (United States)

    Wanner, Daniel; Kreußlein, Maria; Augusto, Bruno; Drugge, Lars; Stensson Trigell, Annika

    2016-10-01

    This research work studies the impact of single wheel hub motor failures on the dynamic behaviour of electric vehicles and the corresponding driver reactions. An experimental study in a moving-base driving simulator is conducted to analyse the influence of single wheel hub motor failures for motorway speeds. Driver reaction times are derived from the measured data and discussed in their experimental context. The failure is rated objectively on the dynamic behaviour of the vehicle and compared to the subjective evaluation. Findings indicate that critical traffic situations impairing traffic safety can occur for motorway speeds. Clear counteractions by the drivers had to be taken.

  13. Transfer Scheme Evaluation Model for a Transportation Hub based on Vectorial Angle Cosine

    Directory of Open Access Journals (Sweden)

    Li-Ya Yao

    2014-07-01

    Full Text Available As the most important node in public transport network, efficiency of a transport hub determines the entire efficiency of the whole transport network. In order to put forward effective transfer schemes, a comprehensive evaluation index system of urban transport hubs’ transfer efficiency was built, evaluation indexes were quantified, and an evaluation model of a multi-objective decision hub transfer scheme was established based on vectorial angle cosine. Qualitative and quantitative analysis on factors affecting transfer efficiency is conducted, which discusses the passenger satisfaction, transfer coordination, transfer efficiency, smoothness, economy, etc. Thus, a new solution to transfer scheme utilization was proposed.

  14. Virtual Campus Hub: A single sign-on system for cross-border collaboration

    DEFF Research Database (Denmark)

    Badger, Merete; Vercoulen, F.; Monaco, L.

    2013-01-01

    the applications used there. The objective of Virtual Campus Hub is to use state-of-the-art European e-Infrastructures (Géant) in combination with federated authentication to establish a single sign-on system between universities. A pilot environment, which links applications from the four partner universities...... to European e-Infrastructures relies upon the National Research and Education Networks (NRENs) which are not geared towards commercial enterprises at present. A range of applications for online teaching and collaboration has been developed as part of the Virtual Campus Hub project. These include remote...

  15. Hub-enhanced noise-sustained synchronization of an externally forced FitzHugh-Nagumo ring

    Science.gov (United States)

    Sánchez, Alejandro D.; Izús, Gonzalo G.; dell'Erba, Matías G.; Deza, Roberto R.

    2017-02-01

    A ring of FitzHugh-Nagumo units with antiphase coupling between their activator fields and submitted to a adiabatic harmonic subthreshold signal, is in turn globally coupled in electrical mode with the activator field of a hub. Noise sustained synchronization of neural activity with the signal is numerically observed, and theoretically characterized. The different dynamical regimes are elucidated using the concept of nonequilibrium potential, and the hub is found to promote network synchronization. The minimum noise intensities triggering the activation and synchronization processes are estimated in the framework of a three-neuron model.

  16. Mallow Springs, County Cork, Ireland

    Science.gov (United States)

    Aldwell, C. R.

    1996-03-01

    Because of its copious and reliable rainfall, Ireland has an abundance of springs. Many of the larger ones issue from the Carboniferous limestone that occurs in over 40% of the country. The spring water is mainly a calcium bicarbonate type with a temperature of about 10°C. In the 18th century, warm and cold springs were developed as spas in various parts of Ireland. The popularity of these springs was short and most were in major decline by 1850. Today only one cold spa at Lisdoonvarna, Co. Clare is still operating. Springs in Ireland were places of religious significance for the pre-Christian Druidic religion. In the Christian period they became holy wells, under the patronage of various saints. Cures for many different ailments were attributed to water from these wells.

  17. The Design Pattern: Hub of Enterprise Application Integration%一个企业应用集成的设计模式:Hub

    Institute of Scientific and Technical Information of China (English)

    董云卫; 李伟宏; 郝克刚

    2003-01-01

    The Enterprise Application Integration (EAI) is a challenge of modern enterprise. How much effect of information system in enterprise business implement process that depends on the degree of inner function and information integration of formation system. The choice of EAI methods not only affects the investment of constructing information system and protecting /using old system, but also determines the efficiency of new system. This paper presents a design pattern, named Hub method, from the view of application integration, which adopts the idea in heterogeneous circumstance focusing on interface encapsulating about controlling information exchange and workflow handling. It also gives an implement method and a framework of the Hub in this paper, which is applied on business process management. And a good performance is achieved in controlling information exchange and workflow handling among enterprise applications. It not only improves system integration capability, stich as expansibility, flexibility, and opening through the method of the Hub, but also takes a great advance in soft reuse during software designing and implementing.

  18. Spring comes for ATLAS

    CERN Multimedia

    Butin, F.

    2004-01-01

    (First published in the CERN weekly bulletin 24/2004, 7 June 2004.) A short while ago the ATLAS cavern underwent a spring clean, marking the end of the installation of the detector's support structures and the cavern's general infrastructure. The list of infrastructure to be installed in the ATLAS cavern from September 2003 was long: a thousand tonnes of mechanical structures spread over 13 storeys, two lifts, two 65-tonne overhead travelling cranes 25 metres above cavern floor, with a telescopic boom and cradle to access the remaining 10 metres of the cavern, a ventilation system for the 55 000 cubic metre cavern, a drainage system, a standard sprinkler system and an innovative foam fire-extinguishing system, as well as the external cryogenic system for the superconducting magnets and the liquid argon calorimeters (comprising, amongst other things, two helium refrigeration units, a nitrogen refrigeration unit and 5 km of piping for gaseous or liquid helium and nitrogen), not to mention the handling eq...

  19. A bountiful spring harvest

    CERN Multimedia

    2013-01-01

    Although we recently put the clocks forward and spring has officially begun, the view from my window looks more autumnal – befitting of the season of mists and mellow fruitfulness, rather than that of sowing seeds for the future. Which, in a way is appropriate. With the LHC paused, we are reaping a kind of harvest in the form of recognition for our efforts.   Two weeks ago, I was in Edinburgh, on behalf of everyone at CERN, to collect the Edinburgh medal, which we shared with Peter Higgs. I particularly like the citation for this honour: “The Edinburgh Medal is awarded each year to men and women of science and technology whose professional achievements are judged to have made a significant contribution to the understanding and well-being of humanity.” I like this, because it underlines a fact that needs to be shouted louder – that fundamental science does more than build the sum of human knowledge, it is also the foundation of human well-being. A few d...

  20. Analytical and finite element simulation of a three-bar torsion spring

    Science.gov (United States)

    Rădoi, M.; Cicone, T.

    2016-08-01

    The present study is dedicated to the innovative 3-bar torsion spring used as suspension solution for the first time at Lunokhod-1, the first autonomous vehicle sent for the exploration of the Moon in the early 70-ies by the former USSR. The paper describes a simple analytical model for calculation of spring static characteristics, taking into account both torsion and bending effects. Closed form solutions of this model allows quick and elegant parametric analysis. A comparison with a single torsion bar with the same stiffness reveal an increase of the maximum stress with more than 50%. A 3D finite element (FE) simulation is proposed to evaluate the accuracy of the analytical model. The model was meshed in an automated pattern (sweep for hubs and tetrahedrons for bars) with mesh morphing. Very close results between analytical and numerical solutions have been found, concluding that the analytical model is accurate. The 3-D finite element simulation was used to evaluate the effects of design details like fillet radius of the bars or contact stresses in the hex hub.

  1. Final Report for Project: Impacts of stratification and non-equilibrium winds and waves on hub-height winds

    Energy Technology Data Exchange (ETDEWEB)

    Patton, Edward G. [Univ. Corporation for Atmospheric Research, Boulder, CO (United States)

    2015-07-14

    wind plant scale. Overall project conclusions include; In the presence of fast-moving swell (significant wave height Hs = 6.4 m, and phase speed cp = 18 ms-1), the atmospheric boundary layer grows more rapidly when waves propagate opposite to the winds compared to when winds and waves are aligned. Pressure drag increases by nearly a factor of 2 relative to the turbulent stress for the extreme case where waves propagate at 180° compared to the pressure gradient forcing. Net wind speed reduces by nearly 15% at hub-height for the 180°-case compared to the 0°-case, and turbulence intensities increase by nearly a factor of 2. These impacts diminish with decreasing wave age; Stratification increases hub height wind speeds and increases the vertical shear of the mean wind across the rotor plane. Fortuitously, this stability-induced enhanced shear does not influence turbulence intensity at hub height, but does increase (decrease) turbulence intensity below (above) hub height. Increased stability also increases the wave-induced pressure stress by ~ 10%; Off the East Coast of the United States during Coupled Boundary Layers Air-Sea Transfer - Low Wind (CBLAST-Low), cases with short fetch include thin stable boundary layers with depths of only a few tens of meters. In the coastal zone, the relationship between the mean wind and the surface fiction velocity (u*(V )) is significantly related to wind direction for weak winds but is not systematically related to the air sea difference of virtual potential temperature, δθv; since waves generally propagate from the south at the Air-Sea Interaction Tower (ASIT) tower, these results suggest that under weak wind conditions waves likely influence surface stress more than stratification does; and Winds and waves are frequently misaligned in the coastal zone. Stability conditions persist for long duration. Over a four year period, the Forschungsplattformen in Nord- und Ostsee Nr. 1 (FINO1) tower (a site with long fetch

  2. 76 FR 10328 - Grant of Authority for Subzone Status; Vestas Nacelles America, Inc. (Wind Turbine Nacelles, Hubs...

    Science.gov (United States)

    2011-02-24

    ... manufacturing and warehousing of wind turbine nacelles, hubs, blades and towers at the Vestas Nacelles America... Foreign-Trade Zones Board Grant of Authority for Subzone Status; Vestas Nacelles America, Inc. (Wind Turbine Nacelles, Hubs, Blades and Towers), Brighton, Denver, Pueblo, and Windsor, CO Pursuant to...

  3. 75 FR 76003 - Tricor Ten Section Hub LLC; Notice of Availability of the Environmental Assessment for the...

    Science.gov (United States)

    2010-12-07

    ... Energy Regulatory Commission Tricor Ten Section Hub LLC; Notice of Availability of the Environmental Assessment for the Proposed Ten Section Gas Storage Project November 29, 2010. The staff of the Federal... Ten Section Gas Storage Project, in Kern County, California, proposed by Tricor Ten Section Hub...

  4. USDA Midwest and Northern Forests Regional Climate Hub: Assessment of climate change vulnerability and adaptation and mitigation strategies

    Science.gov (United States)

    The Midwest Regional Climate Hub covers the States of Illinois, Indiana, Iowa, Michigan, Minnesota, Missouri, Ohio, and Wisconsin and represents one of the most extensive and intensive agricultural systems in the world. The Northern Forests Climate Sub Hub shares this footprint and represents people...

  5. SPRING FESTIVAL ON THE LOESS PLATEAU

    Institute of Scientific and Technical Information of China (English)

    亦西; 杨延康

    2005-01-01

    How Spring Festival is celebrated Although the date of the Spring Festival was switched from the beginning of spring to the first day of the first lunar month, the main ways of celebrating it, from bygone days, remain popular.

  6. Role of governance in creating a commodity hub: A comparative analysis

    Directory of Open Access Journals (Sweden)

    M.P. Haris

    2016-10-01

    Full Text Available The body of work on natural gas hubs has been expanding rapidly in recent years, with most of the current work examining the creation of gas hubs focusing on either the European experience or the North American experience. In this paper, we adopt a different perspective and place the focus on experience of hub building from other international commodities. We analyse three commodities - crude oil, iron ore and coal, and draw experience on the role of governance in development of hub based prices. In particular, we propose that the role of governance is different at different stages of the pricing transition to market based pricing. Governance could play an important role at the initial stage, building the relevant soft and physical infrastructure which facilitates the reaping of first mover advantage. As the market develops, private sector players may prefer less involvement of governance, which may distort markets. With market stabilization, governance should be focused on maintaining stable rules and regulation for private sector development, as well as monitoring for further changes in global trends. To facilitate the building of a benchmark price, the public sector should adopt a long-term and overarching view on industry growth.

  7. Unveiling Exception Handling Bug Hazards in Android Based on GitHub and Google Code Issues

    NARCIS (Netherlands)

    Coelho, R.; Almeida, L.; Gousios, G.; Van Deursen, A.

    2015-01-01

    This paper reports on a study mining the exception stack traces included in 159,048 issues reported on Android projects hosted in GitHub (482 projects) and Google Code (157 projects). The goal of this study is to investigate whether stack trace information can reveal bug hazards related to exception

  8. Towards collaborative, intermodal hub networks. A case study in the fast moving consumer goods market

    NARCIS (Netherlands)

    Groothedde, B.; Ruijgrok, C.; Tavasszy, L.

    2005-01-01

    Collaborative hub networks can provide an answer to the need to decrease logistics cost and maintain logistics service levels by shifting consolidated flows to modes that are better suited for handling large volumes (rail, barge, coastal shipping), so economies of scale can be obtained. This necessi

  9. Hub and shroud fillets influence on the radial compressor stage efficiency

    Directory of Open Access Journals (Sweden)

    Syka Tomáš

    2015-01-01

    Full Text Available Article describes numerical simulations of an air flow in the radial compressor stage in the NUMECA CFD software. During the tasks evaluating the stepped and straight impeller seals and hub and shroud fillets influence on working characteristics and flow field was observed. Also the CFD results comparison with results from the empiric design tool and the measurement is described.

  10. An Optimization of the Hub-and-Spoke Distribution Network in United States European Command

    Science.gov (United States)

    2002-03-01

    9 Vehicle Routing Problem ......................................................................................... 11...system. These range from direct delivery to a fully developed hub-and-spoke system. These models all include some variation of the vehicle routing problem , facility...assets. Vehicle Routing Problem Vehicle Routing Problems (VRPs) are based on the classic Traveling Salesman Problem (TSP). The TSP is

  11. Positioning as Regional Hub of Higher Education: Changing Governance and Regulatory Reforms in Singapore and Malaysia

    Science.gov (United States)

    Mok, Ka Ho

    2008-01-01

    With strong intention to enhance the global competitiveness of their university systems, the Singapore and Malaysia governments have made attempts to develop their societies into regional hubs of education. Specifically, they have invited foreign universities to set up their campuses to offer academic programs or to establish private institutions…

  12. Positioning as Regional Hub of Higher Education: Changing Governance and Regulatory Reforms in Singapore and Malaysia

    Science.gov (United States)

    Mok, Ka Ho

    2008-01-01

    With strong intention to enhance the global competitiveness of their university systems, the Singapore and Malaysia governments have made attempts to develop their societies into regional hubs of education. Specifically, they have invited foreign universities to set up their campuses to offer academic programs or to establish private institutions…

  13. Evaluating Hub and Spoke models of practice learning in Scotland, UK: a multiple case study approach.

    Science.gov (United States)

    Roxburgh, Michelle; Conlon, Margaret; Banks, Debbie

    2012-10-01

    Most of UK students' practice learning experience is based on a rotational placement model which often leads to students lacking confidence and feeling anxious about the complexities of the care environment. To evaluate the impact of Hub and Spoke model(s) of clinical practice placement across geographically diverse locations, with a particular focus on enhancing the student practice learning experience. Multiple case study design. Comprised undergraduate student nurses from Adult, Learning Disability and Mental Health programmes from 3 Scottish Schools of Nursing. A mixed methods approach which included quantitative and qualitative date tools. All three Hub and Spoke models shared two broad findings: 1) In the three Hub and Spoke models detailed in this paper, there is a continuum of student led learning which supports the process with opportunities for individual students to be positively innovative and creative in their learning approaches. Depth of learning was achieved in two ways; a) the method in which Hub placements are organised, managed and structured and, b) the depth of empathy and sensitivity to the individual at the centre of the care. 2) Placement capacity is increased: The classification of placements is reviewed to produce broader categories, Engagement of mentors/enhanced student/mentor relationship. Practice Learning must be seen as an academic endeavour that promotes deep, meaningful, person-centred learning rather than superficial, compartmentalised placement-centred learning. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. Dynamic network participation of functional connectivity hubs assessed by resting-state fMRI

    Science.gov (United States)

    Schaefer, Alexander; Margulies, Daniel S.; Lohmann, Gabriele; Gorgolewski, Krzysztof J.; Smallwood, Jonathan; Kiebel, Stefan J.; Villringer, Arno

    2014-01-01

    Network studies of large-scale brain connectivity have demonstrated that highly connected areas, or “hubs,” are a key feature of human functional and structural brain organization. We use resting-state functional MRI data and connectivity clustering to identify multi-network hubs and show that while hubs can belong to multiple networks their degree of integration into these different networks varies dynamically over time. The extent of the network variation was related to the connectedness of the hub. In addition, we found that these network dynamics were inversely related to positive self-generated thoughts reported by individuals and were further decreased with older age. Moreover, the left caudate varied its degree of participation between a default mode subnetwork and a limbic network. This variation was predictive of individual differences in the reports of past-related thoughts. These results support an association between ongoing thought processes and network dynamics and offer a new approach to investigate the brain dynamics underlying mental experience. PMID:24860458

  15. Fleet deployment, network design and hub location of liner shipping companies

    DEFF Research Database (Denmark)

    Gelareh, Shahin; Pisinger, David

    2011-01-01

    A mixed integer linear programming formulation is proposed for the simultaneous design of network and fleet deployment of a deep-sea liner service provider. The underlying network design problem is based on a 4-index (5-index by considering capacity type) formulation of the hub location problem...

  16. Towards collaborative, intermodal hub networks. A case study in the fast moving consumer goods market

    NARCIS (Netherlands)

    Groothedde, B.; Ruijgrok, C.; Tavasszy, L.

    2005-01-01

    Collaborative hub networks can provide an answer to the need to decrease logistics cost and maintain logistics service levels by shifting consolidated flows to modes that are better suited for handling large volumes (rail, barge, coastal shipping), so economies of scale can be obtained. This

  17. Perceptions of Quality Life in Hamilton's Neighbourhood Hubs: A Qualitative Analysis

    Science.gov (United States)

    Eby, Jeanette; Kitchen, Peter; Williams, Allison

    2012-01-01

    This paper examines perceptions of quality of life in Hamilton, Ontario, Canada from the perspective of residents and key community stakeholders. A series of eight focus groups were conducted. Six sessions were held with residents of neighbourhood "hubs", areas characterized by high levels of poverty. The following themes were highlighted as…

  18. A note on hierarchical hubbing for a generalization of the VPN problem

    NARCIS (Netherlands)

    Olver, N.K.

    2014-01-01

    Robust network design refers to a class of optimization problems that occur when designing networks to efficiently handle variable demands. The notion of "hierarchical hubbing" was introduced (in the narrow context of a specific robust network design question), by Olver and Shepherd [2010]. Hierarch

  19. National Geothermal Data System Hub Deployment Timeline (Appendix E-1-d)

    Energy Technology Data Exchange (ETDEWEB)

    Caudill, Christy [Executive Office of the State of Arizona (Arizona Geological Survey)

    2015-12-20

    Excel spreadsheet describing activity, spending, and development for the four data hubs (Arizona Geoloical Survey, Kentucky Geological Survey, Illinois Geological Survey, and Nevada Bureau of Mines and Geology) serving data for the National Geothermal Data System under the State Contributions to the National Geothermal Data System Project.

  20. Brief Report: The Negev Hospital-University-Based (HUB) Autism Database

    Science.gov (United States)

    Meiri, Gal; Dinstein, Ilan; Michaelowski, Analya; Flusser, Hagit; Ilan, Michal; Faroy, Michal; Bar-Sinai, Asif; Manelis, Liora; Stolowicz, Dana; Yosef, Lili Lea; Davidovitch, Nadav; Golan, Hava; Arbelle, Shosh; Menashe, Idan

    2017-01-01

    Elucidating the heterogeneous etiologies of autism will require investment in comprehensive longitudinal data acquisition from large community based cohorts. With this in mind, we have established a hospital-university-based (HUB) database of autism which incorporates prospective and retrospective data from a large and ethnically diverse…

  1. Perceptions of Quality Life in Hamilton's Neighbourhood Hubs: A Qualitative Analysis

    Science.gov (United States)

    Eby, Jeanette; Kitchen, Peter; Williams, Allison

    2012-01-01

    This paper examines perceptions of quality of life in Hamilton, Ontario, Canada from the perspective of residents and key community stakeholders. A series of eight focus groups were conducted. Six sessions were held with residents of neighbourhood "hubs", areas characterized by high levels of poverty. The following themes were…

  2. Fleet deployment, network design and hub location of liner shipping companies

    DEFF Research Database (Denmark)

    Gelareh, Shahin; Pisinger, David

    2011-01-01

    A mixed integer linear programming formulation is proposed for the simultaneous design of network and fleet deployment of a deep-sea liner service provider. The underlying network design problem is based on a 4-index (5-index by considering capacity type) formulation of the hub location problem...

  3. Dubai, Aiming to Be an Academic Hub, Strikes a Deal with Michigan State

    Science.gov (United States)

    Krieger, Zvika

    2007-01-01

    Dubai has long competed with its wealthy Persian Gulf neighbors to become a regional hub of higher education. Yet its Knowledge Village, a collection of nearly 20 foreign-university campuses and local educational institutes, has been overshadowed by Qatar's Education City, which is home to the branch campuses of a number of high-profile American…

  4. PERSEUS-HUB: Interactive and Collective Exploration of Large-Scale Graphs

    Directory of Open Access Journals (Sweden)

    Di Jin

    2017-07-01

    Full Text Available Graphs emerge naturally in many domains, such as social science, neuroscience, transportation engineering, and more. In many cases, such graphs have millions or billions of nodes and edges, and their sizes increase daily at a fast pace. How can researchers from various domains explore large graphs interactively and efficiently to find out what is ‘important’? How can multiple researchers explore a new graph dataset collectively and “help” each other with their findings? In this article, we present Perseus-Hub, a large-scale graph mining tool that computes a set of graph properties in a distributed manner, performs ensemble, multi-view anomaly detection to highlight regions that are worth investigating, and provides users with uncluttered visualization and easy interaction with complex graph statistics. Perseus-Hub uses a Spark cluster to calculate various statistics of large-scale graphs efficiently, and aggregates the results in a summary on the master node to support interactive user exploration. In Perseus-Hub, the visualized distributions of graph statistics provide preliminary analysis to understand a graph. To perform a deeper analysis, users with little prior knowledge can leverage patterns (e.g., spikes in the power-law degree distribution marked by other users or experts. Moreover, Perseus-Hub guides users to regions of interest by highlighting anomalous nodes and helps users establish a more comprehensive understanding about the graph at hand. We demonstrate our system through the case study on real, large-scale networks.

  5. Unveiling Exception Handling Bug Hazards in Android Based on GitHub and Google Code Issues

    NARCIS (Netherlands)

    Coelho, R.; Almeida, L.; Gousios, G.; Van Deursen, A.

    2015-01-01

    This paper reports on a study mining the exception stack traces included in 159,048 issues reported on Android projects hosted in GitHub (482 projects) and Google Code (157 projects). The goal of this study is to investigate whether stack trace information can reveal bug hazards related to exception

  6. Nonlinear dynamics and synchronisation of pendula attached to a rotating hub

    Science.gov (United States)

    Warminski, J.; Szmit, Z.; Latalski, J.

    2014-04-01

    A model of a nonlinear system composed of a hub with attached two pendula rotating in a horizontal plane is studied in the paper. Each single pendulum, treated as a stiff and massless rod with a lumped mass, is connected to the hub by a flapping hinge. Nonlinear stiffness and viscous damping of the hinge is taken into consideration. The system is excited by an external torque generated by a DC motor which is considered as an ideal system with torque given by a harmonic function. For small oscillations the problem is linearised and then solved analytically. An influence of the structural parameters like mass of the hub and pendula length on natural end excited vibrations is presented. Large oscillations are studied by a continuation technique, directly from the original Ordinary Differential Equations of motion (ODE). The complete synchronisation, phase synchronisation, bifurcations and transition through resonances are analysed considering the influence of the mass of the hub. The existence of chaotic oscillations of the system and paths leading to chaos are demonstrated as well.

  7. Strategic analysis on establishing a natural gas trading hub in China

    Directory of Open Access Journals (Sweden)

    Xiaoguang Tong

    2014-12-01

    Full Text Available Since 2010, the LNG importing price premium in the Asia–Pacific markets has become increasingly high, generating great effects on the economic development in China. In addition, the natural gas dependence degree is expanding continuously, making it extremely urgent to establish a natural gas trading hub in China, with the aim to ensure national energy security, to gain the pricing power, and to build the regional benchmark prices. Through a comparative analysis of internal strength/weakness and external competitiveness, we concluded that with intensively-issued supporting policies on the natural gas sector, the initiation of spot and futures markets, the rapid growth of gas production and highly-improved infrastructures, as well as Shanghai's advantageous location, China has more advantages in establishing an Asian Natural Gas Trading Hub than other counties like Singapore, Japan and Malaysia. Moreover, based on the SWOT (strength, weakness, opportunity and threat and the marketization process analysis, the following strategies were presented: to impel the establishment of a natural gas trading hub depending on the gas supply condition, to follow the policies to complete the gas storage system, to form regional communities by taking comparative advantages, and to reinforce the marketization reform and regulation system establishment with foreign experiences for reference. This study rationalized the necessity and practicality of establishing a natural gas trading hub in China and will help China make a proper decision and find a periodical strategic path in this sector.

  8. Altered connectivity pattern of hubs in default-mode network with Alzheimer's disease: an Granger causality modeling approach.

    Directory of Open Access Journals (Sweden)

    Xiaoyan Miao

    Full Text Available BACKGROUND: Evidences from normal subjects suggest that the default-mode network (DMN has posterior cingulate cortex (PCC, medial prefrontal cortex (MPFC and inferior parietal cortex (IPC as its hubs; meanwhile, these DMN nodes are often found to be abnormally recruited in Alzheimer's disease (AD patients. The issues on how these hubs interact to each other, with the rest nodes of the DMN and the altered pattern of hubs with respect to AD, are still on going discussion for eventual final clarification. PRINCIPAL FINDINGS: To address these issues, we investigated the causal influences between any pair of nodes within the DMN using Granger causality analysis and graph-theoretic methods on resting-state fMRI data of 12 young subjects, 16 old normal controls and 15 AD patients respectively. We found that: (1 PCC/MPFC/IPC, especially the PCC, showed the widest and distinctive causal effects on the DMN dynamics in young group; (2 the pattern of DMN hubs was abnormal in AD patients compared to old control: MPFC and IPC had obvious causal interaction disruption with other nodes; the PCC showed outstanding performance for it was the only region having causal relation with all other nodes significantly; (3 the altered relation between hubs and other DMN nodes held potential as a noninvasive biomarker of AD. CONCLUSIONS: Our study, to the best of our knowledge, is the first to support the hub configuration of the DMN from the perspective of causal relationship, and reveal abnormal pattern of the DMN hubs in AD. Findings from young subjects provide additional evidence for the role of PCC/MPFC/IPC acting as hubs in the DMN. Compared to old control, MPFC and IPC lost their roles as hubs owing to the obvious causal interaction disruption, and PCC was preserved as the only hub showing significant causal relations with all other nodes.

  9. Coffee Shops, Classrooms and Conversations: public engagement and outreach in a large interdisciplinary research Hub

    Science.gov (United States)

    Holden, Jennifer A.

    2014-05-01

    Public engagement and outreach activities are increasingly using specialist staff for co-ordination, training and support for researchers, they are also becoming expected for large investments. Here, the experience of public engagement and outreach a large, interdisciplinary Research Hub is described. dot.rural, based at the University of Aberdeen UK, is a £11.8 million Research Councils UK Rural Digital Economy Hub, funded as part of the RCUK Digital Economy Theme (2009-2015). Digital Economy research aims to realise the transformational impact of digital technologies on aspects of the environment, community life, cultural experiences, future society, and the economy. The dot.rural Hub involves 92 researchers from 12 different disciplines, including Geography, Hydrology and Ecology. Public Engagement and Outreach is embedded in the dot.rural Digital Economy Hub via an Outreach Officer. Alongside this position, public engagement and outreach activities are compulsory part of PhD student contracts. Public Engagement and Outreach activities at the dot.rural Hub involve individuals and groups in both formal and informal settings organised by dot.rural and other organisations. Activities in the realms of Education, Public Engagement, Traditional and Social Media are determined by a set of Underlying Principles designed for the Hub by the Outreach Officer. The underlying Engagement and Outreach principles match funding agency requirements and expectations alongside researcher demands and the user-led nature of Digital Economy Research. All activities include researchers alongside the Outreach Officer are research informed and embedded into specific projects that form the Hub. Successful public engagement activities have included participation in Café Scientifique series, workshops in primary and secondary schools, and online activities such as I'm a Scientist Get Me Out of Here. From how to engage 8 year olds with making hydrographs more understandable to members of

  10. Declining functional connectivity and changing hub locations in Alzheimer's disease: an EEG study.

    Science.gov (United States)

    Engels, Marjolein M A; Stam, Cornelis J; van der Flier, Wiesje M; Scheltens, Philip; de Waal, Hanneke; van Straaten, Elisabeth C W

    2015-08-20

    EEG studies have shown that patients with Alzheimer's disease (AD) have weaker functional connectivity than controls, especially in higher frequency bands. Furthermore, active regions seem more prone to AD pathology. How functional connectivity is affected in AD subgroups of disease severity and how network hubs (highly connected brain areas) change is not known. We compared AD patients with different disease severity and controls in terms of functional connections, hub strength and hub location. We studied routine 21-channel resting-state electroencephalography (EEG) of 318 AD patients (divided into tertiles based on disease severity: mild, moderate and severe AD) and 133 age-matched controls. Functional connectivity between EEG channels was estimated with the Phase Lag Index (PLI). From the PLI-based connectivity matrix, the minimum spanning tree (MST) was derived. For each node (EEG channel) in the MST, the betweenness centrality (BC) was computed, a measure to quantify the relative importance of a node within the network. Then we derived color-coded head plots based on BC values and calculated the center of mass (the exact middle had x and y values of 0). A shifting of the hub locations was defined as a shift of the center of mass on the y-axis across groups. Multivariate general linear models with PLI or BC values as dependent variables and the groups as continuous variables were used in the five conventional frequency bands. We found that functional connectivity decreases with increasing disease severity in the alpha band. All, except for posterior, regions showed increasing BC values with increasing disease severity. The center of mass shifted from posterior to more anterior regions with increasing disease severity in the higher frequency bands, indicating a loss of relative functional importance of the posterior brain regions. In conclusion, we observed decreasing functional connectivity in the posterior regions, together with a shifted hub location from

  11. Development of a Composite Leaf Spring for a Light Commercial Vehicle (Tata Magic)

    OpenAIRE

    Vivek Rai

    2013-01-01

    Present time the main issue of automobile industry are weight reduction. The automobile industry has looking for any implementation or modification to reduce the weight of the vehicle. The suspension leaf spring is one of the potential items for weight reduction in automobile as it accounts for 10% to 20% of the unsprung weight. The introduction of composite leaf spring made of glass fiber rein forced plastic (GFRP) has made it to possible to reduce the weight of spring without any reduction ...

  12. Carbon-Water Interactions during Warm Spring and Summer Drought

    Science.gov (United States)

    Wolf, Sebastian; Keenan, Trevor F.; Fisher, Joshua B.; Baldocchi, Dennis D.; Desai, Ankur R.; Richardson, Andrew. D.; Scott, Russell L.; Law, Beverly E.; Litvak, Marcy E.; Brunsell, Nathaniel A.; Peters, Wouter; van der Laan-Luijkx, Ingrid T.

    2017-04-01

    Warmer temperatures during spring and a higher prevalence of drought during summer are projected in a changing climate. In 2012, the US experienced the warmest spring on record and the most severe drought since the Dust Bowl period. It is crucial to understand the impact of such events on carbon-water interactions in terrestrial ecosystems to better predict their response in a future climate. We combined an extensive network of direct ecosystem flux measurements with satellite remote sensing and atmospheric inverse modelling to quantify the impact of the warmer spring and summer drought on biosphere-atmosphere carbon and water exchange in 2012 across the US. We found that earlier vegetation activity increased spring carbon uptake and compensated for the reduced uptake during the summer drought, which mitigated the impact on net annual carbon uptake. The early phenological development in the Northeast played a major role for the continental-scale carbon balance in 2012. The warm spring also depleted soil water resources earlier, and thus exacerbated water limitations during summer. Our results show that the detrimental effects of severe summer drought on ecosystem carbon storage can be mitigated by warming-induced increases in spring carbon uptake. However, the positive carbon cycle effect of warm spring enhances water limitations and can increase summer heating through biosphere-atmosphere feedbacks.

  13. Looking into Pandora's Box: The Content of Sci-Hub and its Usage.

    Science.gov (United States)

    Greshake, Bastian

    2017-01-01

    Despite the growth of Open Access, potentially illegally circumventing paywalls to access scholarly publications is becoming a more mainstream phenomenon. The web service Sci-Hub is amongst the biggest facilitators of this, offering free access to around 62 million publications. So far it is not well studied how and why its users are accessing publications through Sci-Hub. By utilizing the recently released corpus of Sci-Hub and comparing it to the data of  ~28 million downloads done through the service, this study tries to address some of these questions. The comparative analysis shows that both the usage and complete corpus is largely made up of recently published articles, with users disproportionately favoring newer articles and 35% of downloaded articles being published after 2013. These results hint that embargo periods before publications become Open Access are frequently circumnavigated using Guerilla Open Access approaches like Sci-Hub. On a journal level, the downloads show a bias towards some scholarly disciplines, especially Chemistry, suggesting increased barriers to access for these. Comparing the use and corpus on a publisher level, it becomes clear that only 11% of publishers are highly requested in comparison to the baseline frequency, while 45% of all publishers are significantly less accessed than expected. Despite this, the oligopoly of publishers is even more remarkable on the level of content consumption, with 80% of all downloads being published through only 9 publishers. All of this suggests that Sci-Hub is used by different populations and for a number of different reasons, and that there is still a lack of access to the published scientific record. A further analysis of these openly available data resources will undoubtedly be valuable for the investigation of academic publishing.

  14. When is hub gene selection better than standard meta-analysis?

    Directory of Open Access Journals (Sweden)

    Peter Langfelder

    Full Text Available Since hub nodes have been found to play important roles in many networks, highly connected hub genes are expected to play an important role in biology as well. However, the empirical evidence remains ambiguous. An open question is whether (or when hub gene selection leads to more meaningful gene lists than a standard statistical analysis based on significance testing when analyzing genomic data sets (e.g., gene expression or DNA methylation data. Here we address this question for the special case when multiple genomic data sets are available. This is of great practical importance since for many research questions multiple data sets are publicly available. In this case, the data analyst can decide between a standard statistical approach (e.g., based on meta-analysis and a co-expression network analysis approach that selects intramodular hubs in consensus modules. We assess the performance of these two types of approaches according to two criteria. The first criterion evaluates the biological insights gained and is relevant in basic research. The second criterion evaluates the validation success (reproducibility in independent data sets and often applies in clinical diagnostic or prognostic applications. We compare meta-analysis with consensus network analysis based on weighted correlation network analysis (WGCNA in three comprehensive and unbiased empirical studies: (1 Finding genes predictive of lung cancer survival, (2 finding methylation markers related to age, and (3 finding mouse genes related to total cholesterol. The results demonstrate that intramodular hub gene status with respect to consensus modules is more useful than a meta-analysis p-value when identifying biologically meaningful gene lists (reflecting criterion 1. However, standard meta-analysis methods perform as good as (if not better than a consensus network approach in terms of validation success (criterion 2. The article also reports a comparison of meta-analysis techniques

  15. Fish Springs weather CY 2011

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Weather data for calendar year 2011 at Fish Springs National Wildlife Refuge. Data is provided for each month and includes maximum temperature, minimum temperature,...

  16. Fish Springs weather CY 2010

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Weather data for calendar year 2010 at Fish Springs National Wildlife Refuge. Data is provided for each month and includes maximum temperature, minimum temperature,...

  17. Steller's Eider spring migration surveys

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Annual spring aerial surveys were conducted most years from 1992 to 2008, to monitor the population status and habitat use of Steller's eiders (Polysticta stelleri)...

  18. Report on Fish Springs - 1958

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document discusses field survey results from several trips to Fish Springs National Wildlife Refuge during the summer of 1958. The following information is...

  19. SPARK: Sparsity-based analysis of reliable k-hubness and overlapping network structure in brain functional connectivity.

    Science.gov (United States)

    Lee, Kangjoo; Lina, Jean-Marc; Gotman, Jean; Grova, Christophe

    2016-07-01

    Functional hubs are defined as the specific brain regions with dense connections to other regions in a functional brain network. Among them, connector hubs are of great interests, as they are assumed to promote global and hierarchical communications between functionally specialized networks. Damage to connector hubs may have a more crucial effect on the system than does damage to other hubs. Hubs in graph theory are often identified from a correlation matrix, and classified as connector hubs when the hubs are more connected to regions in other networks than within the networks to which they belong. However, the identification of hubs from functional data is more complex than that from structural data, notably because of the inherent problem of multicollinearity between temporal dynamics within a functional network. In this context, we developed and validated a method to reliably identify connectors and corresponding overlapping network structure from resting-state fMRI. This new method is actually handling the multicollinearity issue, since it does not rely on counting the number of connections from a thresholded correlation matrix. The novelty of the proposed method is that besides counting the number of networks involved in each voxel, it allows us to identify which networks are actually involved in each voxel, using a data-driven sparse general linear model in order to identify brain regions involved in more than one network. Moreover, we added a bootstrap resampling strategy to assess statistically the reproducibility of our results at the single subject level. The unified framework is called SPARK, i.e. SParsity-based Analysis of Reliable k-hubness, where k-hubness denotes the number of networks overlapping in each voxel. The accuracy and robustness of SPARK were evaluated using two dimensional box simulations and realistic simulations that examined detection of artificial hubs generated on real data. Then, test/retest reliability of the method was assessed

  20. N Springs expedited response action proposal

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    Since signing the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) in 1989, the parties to the agreement have recognized the need to modify the approach to conducting investigations, studies, and cleanup actions at Hanford. To implement this approach, the parties have jointly developed the Hanford Past-Practice Strategy. The strategy defines a non-time-critical expedited response action (ERA) as a response action ``needed to abate a threat to human health or welfare or the environment where sufficient time exists for formal planning prior to initiation of response. In accordance with the past-practice strategy, DOE proposes to conduct an ERA at the N Springs, located in the Hanford 100 N Area, to substantially reduce the strontium-90 transport into the river through the groundwater pathway. The purpose of this ERA proposal is to provide sufficient information to select a preferred alternative at N Springs. The nature of an ERA requires that alternatives developed for the ERA be field ready; therefore, all the technologies proposed for the ERA should be capable of addressing the circumstances at N Springs. A comparison of these alternatives is made based on protectiveness, cost, technical feasibility, and institutional considerations to arrive at a preferred alternative. Following the selection of an alternative, a design phase will be conducted; the design phase will include a detailed look at design parameters, performance specifications, and costs of the selected alternative. Testing will be conducted as required to generate design data.

  1. Sharing environmental models: An Approach using GitHub repositories and Web Processing Services

    Science.gov (United States)

    Stasch, Christoph; Nuest, Daniel; Pross, Benjamin

    2016-04-01

    The GLUES (Global Assessment of Land Use Dynamics, Greenhouse Gas Emissions and Ecosystem Services) project established a spatial data infrastructure for scientific geospatial data and metadata (http://geoportal-glues.ufz.de), where different regional collaborative projects researching the impacts of climate and socio-economic changes on sustainable land management can share their underlying base scenarios and datasets. One goal of the project is to ease the sharing of computational models between institutions and to make them easily executable in Web-based infrastructures. In this work, we present such an approach for sharing computational models relying on GitHub repositories (http://github.com) and Web Processing Services. At first, model providers upload their model implementations to GitHub repositories in order to share them with others. The GitHub platform allows users to submit changes to the model code. The changes can be discussed and reviewed before merging them. However, while GitHub allows sharing and collaborating of model source code, it does not actually allow running these models, which requires efforts to transfer the implementation to a model execution framework. We thus have extended an existing implementation of the OGC Web Processing Service standard (http://www.opengeospatial.org/standards/wps), the 52°North Web Processing Service (http://52north.org/wps) platform to retrieve all model implementations from a git (http://git-scm.com) repository and add them to the collection of published geoprocesses. The current implementation is restricted to models implemented as R scripts using WPS4R annotations (Hinz et al.) and to Java algorithms using the 52°North WPS Java API. The models hence become executable through a standardized Web API by multiple clients such as desktop or browser GIS and modelling frameworks. If the model code is changed on the GitHub platform, the changes are retrieved by the service and the processes will be updated

  2. Dimensional consistency achieved in high-performance synchronizing hubs

    OpenAIRE

    2013-01-01

    The tolerances of parts produced for the automotive industry are so tight that any small process variation may mean that the product does not fulfill them. As dimensional tolerances decrease, the material properties of parts are expected to be improved. Depending on the dimensional and material requirements of a part, different production routes are available to find robust processes, minimizing cost and maximizing process capability. Dimensional tolerances have been reduced in recent years, ...

  3. Yakima River Spring Chinook Enhancement Study Appendices, 1991 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Fast, David E.

    1991-05-01

    This document consists of the appendices for annual report DOE/BP/39461--9 which is summarized as follows. The population of Yakima River spring chinook salmon (Oncorhynchus tschawytscha) has been drastically reduced from historic levels reported to be as high as 250,000 adults (Smoker 1956). This reduction is the result of a series of problems including mainstem Columbia dams, dams within the Yakima itself, severely reduced flows due to irrigation diversions, outmigrant loss in irrigation canals, increased thermal and sediment loading, and overfishing. Despite these problems, the return of spring chinook to the Yakima River has continued at levels ranging from 854 to 9,442 adults since 1958. In October 1982, the Bonneville Power Administration contracted the Yakima Indian Nation to develop methods to increase production of spring chinook in the Yakima system. The Yakima Nation's current enhancement policy attempts to maintain the genetic integrity of the spring chinook stock native to the Yakima Basin. Relatively small numbers of hatchery fish have been released into the basin in past years. The goal of this study was to develop data that will be used to present management alternatives for Yakima River spring chinook. A major objective of this study is to determine the distribution, abundance and survival of wild Yakima River spring chinook. The second major objective of this study is to determine the relative effectiveness of different methods of hatchery supplementation. The last three major objectives of the study are to locate and define areas in the watershed that may be used for the rearing of spring chinook; to define strategies for enhancing natural production of spring chinook in the Yakima River; and to determine the physical and biological limitations on production within the system.

  4. Yakima River Spring Chinook Enhancement Study, 1991 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Fast, David E.

    1991-05-01

    The population of Yakima River spring chinook salmon (Oncorhynchus tschawytscha) has been drastically reduced from historic levels reported to be as high as 250,000 adults (Smoker 1956). This reduction is the result of a series of problems including mainstem Columbia dams, dams within the Yakima itself, severely reduced flows due to irrigation diversions, outmigrant loss in irrigation canals, increased thermal and sediment loading, and overfishing. Despite these problems, the return of spring chinook to the Yakima River has continued at levels ranging from 854 to 9,442 adults since 1958. In October 1982, the Bonneville Power Administration contracted the Yakima Indian Nation to develop methods to increase production of spring chinook in the Yakima system. The Yakima Nation's current enhancement policy attempts to maintain the genetic integrity of the spring chinook stock native to the Yakima Basin. Relatively small numbers of hatchery fish have been released into the basin in past years. The goal of this study was to develop data that will be used to present management alternatives for Yakima River spring chinook. A major objective of this study is to determine the distribution, abundance and survival of wild Yakima River spring chinook. The second major objective of this study is to determine the relative effectiveness of different methods of hatchery supplementation. The last three major objectives of the study are to locate and define areas in the watershed that may be used for the rearing of spring chinook; to define strategies for enhancing natural production of spring chinook in the Yakima River; and to determine the physical and biological limitations on production within the system. 47 refs., 89 figs., 67 tabs.

  5. KINEMATIC ANALYSES OF THE GOLF SWING HUB PATH AND ITS ROLE IN GOLFER/CLUB KINETIC TRANSFERS

    Directory of Open Access Journals (Sweden)

    Steven M. Nesbit

    2009-06-01

    Full Text Available This study analyzed the fundamental geometric and kinematic characteristics of the swing hub path of the golf shot for four diverse subjects. In addition, the role of the hub path geometry in transferring the kinetic quantities from the golfer to the club were investigated. The hub path was found to have a complex geometry with significantly changing radii, and a constantly moving center-of-curvature during the downswing for all subjects. While the size and shape of the hub path differed considerably among the subjects, a three phase radius-based pattern was revealed that aligned with distinct stages of the downswing. Artificially controlling and optimizing the hub path of the better golfer in the group indicated that a non-circular hub path was superior to a constant radius path in minimizing the kinetic loading while generating the highest possible club head velocity. The shape and purpose of the hub path geometry appears to result from a complex combination of achieving equilibrium between the golfer and the club, and a purposeful configuring of the path to control the outward movement of the club while minimizing the kinetic loading on the golfer yet transferring the maximum kinetic quantities to the club. Describing the downswing relative to the hub path phasing is presented and was found to be informative since the phases align with significant swing, kinetic and kinematic markers. These findings challenge golf swing modeling methodologies which fix the center-of-curvature of the hub path thus constraining it to constant radius motion

  6. Microbial Hub Taxa Link Host and Abiotic Factors to Plant Microbiome Variation.

    Directory of Open Access Journals (Sweden)

    Matthew T Agler

    2016-01-01

    Full Text Available Plant-associated microorganisms have been shown to critically affect host physiology and performance, suggesting that evolution and ecology of plants and animals can only be understood in a holobiont (host and its associated organisms context. Host-associated microbial community structures are affected by abiotic and host factors, and increased attention is given to the role of the microbiome in interactions such as pathogen inhibition. However, little is known about how these factors act on the microbial community, and especially what role microbe-microbe interaction dynamics play. We have begun to address this knowledge gap for phyllosphere microbiomes of plants by simultaneously studying three major groups of Arabidopsis thaliana symbionts (bacteria, fungi and oomycetes using a systems biology approach. We evaluated multiple potential factors of microbial community control: we sampled various wild A. thaliana populations at different times, performed field plantings with different host genotypes, and implemented successive host colonization experiments under lab conditions where abiotic factors, host genotype, and pathogen colonization was manipulated. Our results indicate that both abiotic factors and host genotype interact to affect plant colonization by all three groups of microbes. Considering microbe-microbe interactions, however, uncovered a network of interkingdom interactions with significant contributions to community structure. As in other scale-free networks, a small number of taxa, which we call microbial "hubs," are strongly interconnected and have a severe effect on communities. By documenting these microbe-microbe interactions, we uncover an important mechanism explaining how abiotic factors and host genotypic signatures control microbial communities. In short, they act directly on "hub" microbes, which, via microbe-microbe interactions, transmit the effects to the microbial community. We analyzed two "hub" microbes (the

  7. Fossilization Processes in Thermal Springs

    Science.gov (United States)

    Farmer, Jack D.; Cady, Sherry; Desmarais, David J.; Chang, Sherwood (Technical Monitor)

    1995-01-01

    To create a comparative framework for the study of ancient examples, we have been carrying out parallel studies of the microbial biosedimentology, taphonomy and geochemistry of modem and sub-Recent thermal spring deposits. One goal of the research is the development of integrated litho- and taphofacies models for siliceous and travertline sinters. Thermal springs are regarded as important environments for the origin and early evolution of life on Earth, and we seek to utilize information from the fossil record to reconstruct the evolution of high temperature ecosystems. Microbial contributions to the fabric of thermal spring sinters occur when population growth rates keep pace with, or exceed rates of inorganic precipitation, allowing for the development of continuous biofilms or mats. In siliceous thermal springs, microorganisms are typically entombed while viable. Modes of preservation reflect the balance between rates of organic matter degradation, silica precipitation and secondary infilling. Subaerial sinters are initially quite porous and permeable and at temperatures higher than about 20 C, organic materials are usually degraded prior to secondary infilling of sinter frameworks. Thus, organically-preserved microfossils are rare and fossil information consists of characteristic biofabrics formed by the encrustation and underplating of microbial mat surfaces. This probably accounts for the typically low total organic carbon values observed in thermal spring deposits. In mid-temperature, (approx. 35 - 59 C) ponds and outflows, the surface morphology of tufted Phormidium mats is preserved through mat underplating by thin siliceous: crusts. Microbial taxes lead to clumping of ceils and/or preferred filament orientations that together define higher order composite fabrics in thermal spring stromatolites (e.g. network, coniform, and palisade). At lower temperatures (less than 35 C), Calothrix mats cover shallow terracette pools forming flat carpets or pustular

  8. From hub proteins to hub modules: the relationship between essentiality and centrality in the yeast interactome at different scales of organization.

    Directory of Open Access Journals (Sweden)

    Jimin Song

    Full Text Available Numerous studies have suggested that hub proteins in the S. cerevisiae physical interaction network are more likely to be essential than other proteins. The proposed reasons underlying this observed relationship between topology and functioning have been subject to some controversy, with recent work suggesting that it arises due to the participation of hub proteins in essential complexes and processes. However, do these essential modules themselves have distinct network characteristics, and how do their essential proteins differ in their topological properties from their non-essential proteins? We aimed to advance our understanding of protein essentiality by analyzing proteins, complexes and processes within their broader functional context and by considering physical interactions both within and across complexes and biological processes. In agreement with the view that essentiality is a modular property, we found that the number of intracomplex or intraprocess interactions that a protein has is a better indicator of its essentiality than its overall number of interactions. Moreover, we found that within an essential complex, its essential proteins have on average more interactions, especially intracomplex interactions, than its non-essential proteins. Finally, we built a module-level interaction network and found that essential complexes and processes tend to have higher interaction degrees in this network than non-essential complexes and processes; that is, they exhibit a larger amount of functional cross-talk than their non-essential counterparts.

  9. Hub and spoke model: making rural healthcare in India affordable, available and accessible.

    Science.gov (United States)

    Devarakonda, Srichand

    2016-01-01

    Quality health care should be within everyone's reach, especially in a developing country. While India has the largest private health sector in the world, only one-fifth of healthcare expenditure is publically financed; it is mostly an out-of-pocket expense. About 70% of Indians live in rural areas making about $3 per day, and a major portion of that goes towards food and shelter and, thus, not towards health care. Transportation facilities in rural India are poor, making access to medical facilities difficult, and infrastructure facilities are minimal, making the available medical care insufficient. The challenge presented to India was to provide health care that was accessible, available and affordable to people in rural areas and the low-income bracket. The intent of this article is to determine whether the hub and spoke model (HSM), when implemented in the healthcare industry, can expand the market reach and increase profits while reducing costs of operations for organizations and, thereby, cost to customers. This article also discusses the importance of information and communications technologies (ICT) in the HSM approach, which the handful of published articles in this topic have failed to discuss. This article opts for an exploratory study, including review of published literature, web articles, viewpoints of industry experts, published journals, and in-depth interviews. This article will discuss how and why the HSM works in India's healthcare industry while isolating its strengths and weaknesses, and analyzing the impact of India's success. India's HSM implementation has become a paramount example of an acceptable model that, while exceeding the needs and expectations of its patients, is cost-effective and has obtained operational and health-driven results. Despite being an emerging nation, India takes the top spot in terms of affordability of ICT as well as for having the highest number of computer-literate graduates and healthcare workers in the world

  10. Hydrosalinity studies of the Virgin River, Dixie Hot Springs, and Littlefield Springs, Utah, Arizona, and Nevada

    Science.gov (United States)

    Gerner, Steven J.; Thiros, Susan A.; Gerner, Steven J.; Thiros, Susan A.

    2014-01-01

    in the Virgin River Gorge containing known fault zones accounted for about 48 percent of this total seepage loss. An additional seepage loss of 6.7 ft3/s was calculated for the reach of the Virgin River between Bloomington, Utah, and the Utah/Arizona State line. This loss in flow is small compared to total flow in the river and is comparable to the rated error in streamflow measurements in this reach; consequently, it should be used with caution. Littlefield Springs were studied to determine the fraction of its discharge that originates as upstream seepage from the Virgin River and residence time of this water in the subsurface. Geochemical and environmental tracer data from groundwater and surface-water sites in the Virgin River Gorge area suggest that discharge from Littlefield Springs is a mixture of modern (post-1950s) seepage from the Virgin River upstream of the springs and older groundwater from a regional carbonate aquifer. Concentrations of the chlorofluorocarbons (CFCs) CFC-12 and CFC-113, chloride/fluoride and chloride/bromide ratios, and the stable isotope deuterium indicate that water discharging from Littlefield Springs is about 60 percent seepage from the Virgin River and about 40 percent discharge from the regional carbonate aquifer. The river seepage component was determined to have an average subsurface traveltime of about 26 ±1.6 years before discharging at Littlefield Springs. Radiocarbon data for Littlefield Springs suggest groundwater ages from 1,000 to 9,000 years. Because these are mixed waters, the component of discharge from the carbonate aquifer is likely much older than the groundwater ages suggested by the Littlefield Springs samples. If the dissolved-solids load from Dixie Hot Springs to the Virgin River were reduced, the irrigation water subsequently applied to agricultural fields in the St. George and Washington areas, which originates as water from the Virgin River downstream of Dixie Hot Springs, would have a lower dissolved

  11. Omni directional mobile robot capable of variable foot printing based on hub type drive module

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyo Joong; Cho, Chang Nho; Kim, Hwi Su; Song, Jae Bok [Korea Univ., Seoul (Korea, Republic of)

    2012-03-15

    In recent years, an increased amount of research has been carried out on mobile robots to improve the performance of service robots. Mobile robots maximize the mobility of service robots, thus allowing them to work in different areas. However, conventional service robots have their center of mass placed high above the ground, which may cause them to fall when moving at high speed. Furthermore, hub type actuators, which are often used for mobile robots, are large and expensive. In this study, we propose a mobile robot with a hub type actuator unit and a variable footprint mechanism. The proposed variable footprint mechanism greatly improves the stability and mobility of the robot, allowing it to move freely in a narrow space and carry out various tasks. The performance of the proposed robot is verified experimentally.

  12. Dynamic network participation of functional connectivity hubs assessed by resting-state fMRI

    Directory of Open Access Journals (Sweden)

    Alexander eSchaefer

    2014-05-01

    Full Text Available Network studies of large-scale brain connectivity have demonstrated that highly connected areas, or ‘hubs’, are a key feature of human functional and structural brain organization. We use resting-state functional MRI data and connectivity clustering to identify multi network hubs and show that while hubs can belong to multiple networks their degree of integration into these different networks varies dynamically over time. In addition, we found that these network dynamics were inversely related to positive self-generated thoughts reported by individuals and were further decreased with older age. Moreover, the left caudate varied its degree of participation between a default mode subnetwork and a limbic network. This variation was predictive of individual differences in the reports of past-related thoughts. These results support an association between ongoing thought processes and network dynamics and offer a new approach to investigate the brain dynamics underlying mental experience.

  13. Fast reversible learning based on neurons functioning as anisotropic multiplex hubs

    Science.gov (United States)

    Vardi, Roni; Goldental, Amir; Sheinin, Anton; Sardi, Shira; Kanter, Ido

    2017-05-01

    Neural networks are composed of neurons and synapses, which are responsible for learning in a slow adaptive dynamical process. Here we experimentally show that neurons act like independent anisotropic multiplex hubs, which relay and mute incoming signals following their input directions. Theoretically, the observed information routing enriches the computational capabilities of neurons by allowing, for instance, equalization among different information routes in the network, as well as high-frequency transmission of complex time-dependent signals constructed via several parallel routes. In addition, this kind of hubs adaptively eliminate very noisy neurons from the dynamics of the network, preventing masking of information transmission. The timescales for these features are several seconds at most, as opposed to the imprint of information by the synaptic plasticity, a process which exceeds minutes. Results open the horizon to the understanding of fast and adaptive learning realities in higher cognitive brain's functionalities.

  14. Clinical bioethics integration, sustainability, and accountability: the Hub and Spokes Strategy.

    Science.gov (United States)

    MacRae, S; Chidwick, P; Berry, S; Secker, B; Hébert, P; Shaul, R Zlotnik; Faith, K; Singer, P A

    2005-05-01

    The "lone" clinical bioethicist working in a large, multisite hospital faces considerable challenges. While attempting to build ethics capacity and sustain a demanding range of responsibilities, he or she must also achieve an acceptable level of integration, sustainability, and accountability within a complex organisational structure. In an effort to address such inherent demands and to create a platform towards better evaluation and effectiveness, the Clinical Ethics Group at the Joint Centre for Bioethics at the University of Toronto is implementing the Hub and Spokes Strategy at seven hospitals. The goal of the Hub and Spokes Strategy is to foster an ethical climate and strengthen ethics capacity broadly throughout healthcare settings as well as create models in clinical bioethics that are excellent and effective.

  15. Giant hub Src and Syk tyrosine kinase thermodynamic profiles recapitulate evolution

    Science.gov (United States)

    Phillips, J. C.

    2017-10-01

    Thermodynamic scaling theory, previously applied mainly to small proteins, here analyzes quantitative evolution of the titled functional network giant hub enzymes. The broad domain structure identified homologically is confirmed hydropathically using amino acid sequences only. The most surprising results concern the evolution of the tyrosine kinase globular surface roughness from avians to mammals, which is first order, compared to the evolution within mammals from rodents to humans, which is second order. The mystery of the unique amide terminal region of proto oncogene tyrosine protein kinase is resolved by the discovery there of a rare hydroneutral septad targeting cluster, which is paralleled by an equally rare octad catalytic cluster in tyrosine kinase in humans and a few other species (cat and dog). These results, which go far towards explaining why these proteins are among the largest giant hubs in protein interaction networks, use no adjustable parameters.

  16. Mechanics of anisotropic spring networks

    Science.gov (United States)

    Zhang, T.; Schwarz, J. M.; Das, Moumita

    2014-12-01

    We construct and analyze a model for a disordered linear spring network with anisotropy. The modeling is motivated by, for example, granular systems, nematic elastomers, and ultimately cytoskeletal networks exhibiting some underlying anisotropy. The model consists of a triangular lattice with two different bond occupation probabilities, px and py, for the linear springs. We develop an effective medium theory (EMT) to describe the network elasticity as a function of px and py. We find that the onset of rigidity in the EMT agrees with Maxwell constraint counting. We also find beyond linear behavior in the shear and bulk modulus as a function of occupation probability in the rigid phase for small strains, which differs from the isotropic case. We compare our EMT with numerical simulations to find rather good agreement. Finally, we discuss the implications of extending the reach of effective medium theory as well as draw connections with prior work on both anisotropic and isotropic spring networks.

  17. Motor gasoline assessment, Spring 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    The springs of 1996 and 1997 provide an excellent example of contrasting gasoline market dynamics. In spring 1996, tightening crude oil markets pushed up gasoline prices sharply, adding to the normal seasonal gasoline price increases; however, in spring 1997, crude oil markets loosened and crude oil prices fell, bringing gasoline prices down. This pattern was followed throughout the country except in California. As a result of its unique reformulated gasoline, California prices began to vary significantly from the rest of the country in 1996 and continued to exhibit distinct variations in 1997. In addition to the price contrasts between 1996 and 1997, changes occurred in the way in which gasoline markets were supplied. Low stocks, high refinery utilizations, and high imports persisted through 1996 into summer 1997, but these factors seem to have had little impact on gasoline price spreads relative to average spread.

  18. Spring harvest of corn stover

    Energy Technology Data Exchange (ETDEWEB)

    Lizotte, P.L. [Laval Univ., Quebec City, PQ (Canada). Dept. des sols et de genie agroalimentaire; Savoie, P. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada)

    2010-07-01

    Corn stover is typically left behind in the field after grain harvest. Although part of the stover should remain in the field for soil organic matter renewal and erosion protection, half of the stover could be removed sustainably. This represents about one million t dry matter (DM) of stover per year in the province of Quebec. Stover harvested in the fall is very wet. While there are applications for wet stover, the available markets currently require a dry product. Preliminary measurements have shown that stover left in the field throughout the winter becomes very dry, and a considerable amount would still be harvestable in the spring. In the spring of 2009, corn stover was harvested at 2 sites, each subdivided into 2 parcels. The first parcel was cut and raked in the fall of 2008 (fall parcel), while the second parcel was cut and raked in spring 2009. Fibre from both parcels was baled in the spring 2009. At the first site, a large square baler was used in late April to produce bales measuring 0.8 m x 0.9 m x 1.8 m. On the second site a round baler was used in late May to produce bales of 1.2 m in width by 1.45 m in diameter. On the second site, a small square baler was also used to produce bales of 0.35 m x 0.45 m x 0.60 m (spring cutting only). With the large square baler, an average of 3.9 t DM/ha was harvested equally on the fall parcel and the spring parcel, representing a 48 per cent recovery of biomass based on stover yields.

  19. Unveiling the early-stage anatomy of a protocluster hub with ALMA

    Science.gov (United States)

    Henshaw, J. D.; Jiménez-Serra, I.; Longmore, S. N.; Caselli, P.; Pineda, J. E.; Avison, A.; Barnes, A. T.; Tan, J. C.; Fontani, F.

    2017-01-01

    High-mass stars shape the interstellar medium in galaxies, and yet, largely because the initial conditions are poorly constrained, we do not know how they form. One possibility is that high-mass stars and star clusters form at the junction of filamentary networks, referred to as `hubs'. In this Letter we present the complex anatomy of a protocluster hub within an Infrared Dark Cloud (IRDC), G035.39-00.33, believed to be in an early phase of its evolution. We use high-angular resolution ({θmaj, θmin} = {1.4 arcsec, 0.8 arcsec} ˜ {0.02 pc, 0.01 pc}) and high-sensitivity (0.2 mJy beam-1; ˜0.2 M⊙) 1.07 mm dust continuum observations from the Atacama Large Millimeter Array (ALMA) to identify a network of narrow, 0.028 ± 0.005 pc wide, filamentary structures. These are a factor of ≳3 narrower than the proposed `quasi-universal' ˜0.1 pc width of interstellar filaments. Additionally, 28 compact objects are reported, spanning a mass range 0.3 M⊙ < Mc < 10.4 M⊙. This indicates that at least some low-mass objects are forming coevally with more massive counterparts. Comparing to the popular `bead-on-a-string' analogy, the protocluster hub is poorly represented by a monolithic clump embedded within a single filament. Instead, it comprises multiple intra-hub filaments, each of which retains its integrity as an independent structure and possesses its own embedded core population.

  20. Hub network design for sparse travel demand within the African aviation industry

    CSIR Research Space (South Africa)

    Ssamula, B

    2007-07-01

    Full Text Available as well as corruption leading to insufficient funds to manage national airlines. In order to align African Aviation with policies of deregulation and liberalisation already implemented in North America and Western Europe and to prevent the collapse... for each cluster was based on using the following factors: high passenger demand, infrastructure, technology advancement, number of flights operating, number of airlines operating, hub capabilities or function at airline or geographical level, as shown...

  1. Sensor Networks Hierarchical Optimization Model for Security Monitoring in High-Speed Railway Transport Hub

    Directory of Open Access Journals (Sweden)

    Zhengyu Xie

    2015-01-01

    Full Text Available We consider the sensor networks hierarchical optimization problem in high-speed railway transport hub (HRTH. The sensor networks are optimized from three hierarchies which are key area sensors optimization, passenger line sensors optimization, and whole area sensors optimization. Case study on a specific HRTH in China showed that the hierarchical optimization method is effective to optimize the sensor networks for security monitoring in HRTH.

  2. Wheels, hubs and spokes: incorporating a scorecard into a business continuity programme.

    Science.gov (United States)

    Stourac, Tracy

    2014-01-01

    A scorecard can provide much more than periodic measurements; it can actually serve as the 'hub' of a programme. By taking a strategic look at what one is trying to accomplish, using consistent messaging, following a flexible but defined process and creating an actionable report for the senior leadership, a programme can be built that not only gets attention but is also efficient and effective. The scorecard establishes accountability and consistency while creating a brand for a business continuity programme.

  3. Free vibrations of a flexible tapered arm attached to a compliant hub

    Science.gov (United States)

    Craver, W. Lionel, Jr.; Carrasco, Armando H.

    1991-05-01

    A single link flexible robot arm can be modeled as a Bernoulli Euler beam to describe its dynamic behavior. The first six natural frequencies for a flexible uniform beam attached to a compliant hub undergoing free vibration have previously been presented. This article extends the work to that of a linearly tapered robot arm. The equations of motion are presented and the characteristic determinant is derived. The determinant is then solved for the first five natural frequencies of the system.

  4. Abnormal intrinsic functional hubs in alcohol dependence: evidence from a voxelwise degree centrality analysis.

    Science.gov (United States)

    Luo, Xiaoping; Guo, Linghong; Dai, Xi-Jian; Wang, Qinglai; Zhu, Wenzhong; Miao, Xinjun; Gong, Honghan

    2017-01-01

    To explore the abnormal intrinsic functional hubs in alcohol dependence using voxelwise degree centrality analysis approach, and their relationships with clinical features. Twenty-four male alcohol dependence subjects free of medicine (mean age, 50.21±9.62 years) and 24 age- and education-matched male healthy controls (mean age, 50.29±8.92 years) were recruited. The alcohol use disorders identification test and the severity of alcohol dependence questionnaire (SADQ) were administered to assess the severity of alcohol craving. Voxelwise degree centrality approach was used to assess the abnormal intrinsic functional hubs features in alcohol dependence. Simple linear regression analysis was performed to investigate the relationships between the clinical features and abnormal intrinsic functional hubs. Compared with healthy controls, alcohol dependence subjects exhibited significantly different degree centrality values in widespread left lateralization brain areas, including higher degree centrality values in the left precentral gyrus (BA 6), right hippocampus (BA 35, 36), and left orbitofrontal cortex (BA 11) and lower degree centrality values in the left cerebellum posterior lobe, bilateral secondary visual network (BA 18), and left precuneus (BA 7, 19). SADQ revealed a negative linear correlation with the degree centrality value in the left precentral gyrus (R(2)=0.296, P=0.006). The specific abnormal intrinsic functional hubs appear to be disrupted by alcohol intoxication, which implicates at least three principal neural systems: including cerebellar, executive control, and visual cortex, which may further affect the normal motor behavior such as an explicit type of impaired driving behavior. These findings expand our understanding of the functional characteristics of alcohol dependence and may provide a new insight into the understanding of the dysfunction and pathophysiology of alcohol dependence.

  5. Growing with Global Production Sharing: The Tale of Penang Export Hub

    OpenAIRE

    Prema-chandra Athukorala

    2011-01-01

    Global production sharing—the division of production processes into geographically separated stages—is a central feature of economic globalization. This study seeks to broaden our understanding of global production sharing, and to explore policy options for developing countries to engage effectively in production networks through a case study of the export production hub in the State of Penang, Malaysia. The findings uphold Penang as a unique example of marrying national development strat...

  6. Building a static website with Jekyll and GitHub Pages

    OpenAIRE

    Amanda Visconti

    2016-01-01

    This lesson is for you if you’d like an entirely free, easy-to-maintain, preservation-friendly, secure website over which you have full control, such as a scholarly blog, project website, or online portfolio. At the end of this lesson, you’ll have learned to use technology including Jekyll static site generation and GitHub Pages hosting to create a basic live website where you can publish content that other people can visit.

  7. Establishment of a Hub for the Light Water Reactor Sustainability Online Monitoring Community

    Energy Technology Data Exchange (ETDEWEB)

    Nancy J. Lybeck; Magdy S. Tawfik; Binh T. Pham

    2011-08-01

    Implementation of online monitoring and prognostics in existing U.S. nuclear power plants will involve coordinating the efforts of national laboratories, utilities, universities, and private companies. Internet-based collaborative work environments provide necessary communication tools to facilitate interaction between geographically diverse participants. Available technologies were considered, and a collaborative workspace was established at INL as a hub for the light water reactor sustainability online monitoring community.

  8. ANRIL lncRNA triggers efficient therapeutic efficacy by reprogramming the aberrant INK4-hub in melanoma.

    Science.gov (United States)

    Xu, Shiqiong; Wang, Huixue; Pan, Hui; Shi, Yingyun; Li, Tianyuan; Ge, Shengfang; Jia, Renbing; Zhang, He; Fan, Xianqun

    2016-10-10

    Melanoma is an extremely aggressive disease with rapid progression, high metastatic potential and recurrence. Simultaneous correction of multiple tumor-specific gene abnormalities has become an attractive approach for developing therapeutics to treat melanoma. To potentiate anti-melanoma activity, we tested a "domino effect-like" therapeutic approach by uniquely targeting one defect and automatically triggering the endogenous corrections of other defects. Using this strategy, in a suspicious INK4b-ARF-INK4a gene cluster at chromosome 9p21, aberrant INK4a and INK4b defects were simultaneously endogenously auto-corrected after targeting the suppression of abnormal ANRIL lncRNA. In cell culture, this treatment significantly reduced the tumor metastatic capacity and tumor formation compared with absence of treatment. In animals harboring tumor xenografts, this therapeutic approach significantly inhibited tumor growth and reduced the tumor weight. Our results reveal a novel therapeutic strategy that significantly potentiates anti-melanoma efficiency by reprogramming the aberrant INK4-hub. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  9. The comparisons of lot sizes and costs based on the different bodies responsible for supply -hub operations%不同Supply—hub营运主体下的批量与成本比较研究

    Institute of Scientific and Technical Information of China (English)

    桂华明; 马士华

    2012-01-01

    The supply pattern based on supply -hub under the Just -In -Time (JIT) environment is considered, and the average cost function of manufacturer, supply - huh, and supplier is established. Moreover, the production and order lot - size models of the supply - hub operation and cost, which manufacturer and supplier are responsible for, respectively, are proposed. The results show that under the condition that supply - hub is appropriate,it is more favorable to the supplier than to the manufacturer when the supplier is responsible for supply - hub operation and cost comparing with the manufacturer is responsible for, but the total cost of the supply chain is reduced. It is able to reduce the costs of the manufacturer and the supplier on certain level through negotiations and interest transfer, therefore entire supply chain is achieved Pareto optimization; Moreover, with the distance between the supplier and supply - hub is the further, it is more favorable to the supply chain when the supplier is responsible for supply - hub operation and cost rather than the manufacturer is responsible for that.%本文考虑了JIT环境下基于Supply—hub的供货模式,建立了制造商、Supply—hub和供应商的平均成本函数,并提出了分别由制造商和供应商负责Supply—hub营运及成本的生产与订货批量模型。结果表明,在Supply—hub适用的条件下,相比由制造商负责,供应商负责Supply—hub的运营及成本时,对供应商有利而不利于制造商,但整个供应链的总成本减少,通过供应商与制造商之间的协商和利益转移,可以使制造商和供应商的成本都有所减少,从而实现整个供应链的Pareto优化,此外,供应商距离Supply—hub越远,相比制造商负责,由供应商负责Supply—hub的营运及成本对整个供应链更有利。

  10. Yarn Expo Spring Concluded the Spring Fair in Beijing Successfully

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ As the 2009 Yarn Expo Spring, organized by Messe Frankfurt (HK) Ltd, the Sub-Council of Textile Industry - CCPIT, China Cotton Textile Association, China Wool Textile Association, China Chemical Fibers Association, China Bast & Leaf Fiber Textiles Association, and China Textile Information Centre, came to an end on 1 April, the organizers had something to smile about.

  11. Instant Spring for Android starter

    CERN Document Server

    Dahanne, Anthony

    2013-01-01

    Packt Instant Starter: get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks.This is a Starter which gives you an introduction to Spring for Android with plenty of well-explained practical code examples.If you are an Android developer who wants to learn about RESTful web services and OAuth authentication and authorization, and you also want to know how to speed up your development involving those architectures using Spring for Android abstractions, then this book is for you.But core Java developers

  12. SPring-8 twin helical undulator.

    Science.gov (United States)

    Hara, T; Tanaka, T; Tanabe, T; Maréchal, X M; Kumagai, K; Kitamura, H

    1998-05-01

    There are several ways of producing circularly polarized light, such as using asymmetric devices, crossed undulators etc. The SPring-8 helical undulator introduces a simple way of producing both horizontal and vertical fields in one undulator. All the magnet arrays are arranged above and below the plane of the electron orbit, so there is no limitation of access from the sides of the undulator. For the SPring-8 BL25SU, two helical undulators will be installed in tandem, and the helicity of the polarization can be switched at up to 10 Hz using five kicker magnets.

  13. Numerical and Experimental Stress Analysis of a Composite Leaf Spring

    Directory of Open Access Journals (Sweden)

    Kaveri A. Katake

    2016-10-01

    Full Text Available Automobile sector is always focusing on enhancing level of comfort, fuel economy, customer satisfaction and safety. Vehicle weight reduction increases the overall fuel efficiency. Use of composite materials has made it possible to reduce the weight of the vehicle, without reduction in load carrying capacity. Now a day's manufacturers and researchers are trying to replace conventional material parts with composites. The composite materials have more elastic strain energy storage capacity and high strength to weight ratio as compared to steel. This paper is related to Numerical and experimental strength analysis of suspension leaf springs for a light motor vehicle made of composite materials. Two materials Glass Fiber Reinforced Plastic (GFRP and Carbon Fiber Reinforced Plastic (CFRP are selected for manufacturing of leaf spring. The strength of these composite depends on angle orientation, volume to weight ratio of reinforcement and length to depth ratio of fiber. In this work two leaf springs made of GFRP and a sandwich of CFRP and GFRP are developed. Numerical and experimental static stress analyses are carried out for these two springs. These results are compared with analytical results of conventional metal spring. The comparison shows that composite material springs have compatible strength to withstand load. Comparative results for weight, cost and deformation are presented at the end of the paper.

  14. Smoking restrictions in large-hub airports --- United States, 2002 and 2010.

    Science.gov (United States)

    2010-11-19

    Secondhand smoke (SHS) exposure causes death and disease in both nonsmoking adults and children, including cancer, cardiovascular and respiratory diseases. SHS exposure causes an estimated 46,000 heart disease deaths and 3,400 lung cancer deaths among U.S. nonsmoking adults annually. Adopting policies that completely eliminate smoking in all indoor areas is the only effective way to eliminate involuntary SHS exposure. In 2009, an estimated 696 million aircraft passenger boardings occurred in the United States. A 2002 survey of airport smoking policies found that 42% of 31 large-hub U.S. airports had policies requiring all indoor areas to be smoke-free. To update that finding, CDC analyzed the smoking policies of airports categorized as large-hub in 2010. This report summarizes the results of that analysis, which found that, although 22 (76%) of the 29 large-hub airports surveyed were smoke-free indoors, seven airports permitted smoking in certain indoor locations, including three of the five busiest airports. Although a majority of airports reported having specifically designated smoking areas outdoors in 2010 (79%) and/or prohibiting smoking within a minimum distance of entryways (69%), no airport completely prohibited smoking on all airport property. Smoke-free policies at the state, local, or airport authority level are needed for all airports to protect air travelers and workers at airports from SHS.

  15. Penentuan Pelabuhan Hub untuk Crude Palm Oil (CPO Ekspor di Indonesia

    Directory of Open Access Journals (Sweden)

    Eko Andi Haranto

    2013-03-01

    Full Text Available CPO (Crude Palm Oil merupakan salah satu komoditi ekspor terbesar di Indonesia. Moda angkut darat dan sungai menjadi pilihan untuk didistribusikan menuju calon pelabuhan hub. Tugas Akhir ini bertujuan untuk merencanakan pola operasi armada pengangkut CPO, dan penentuan pelabuhan hub untuk ekspor CPO. Metode Transportasi digunakan untuk memilih pabrik pengolahan CPO sebagai pemasok utama. Dari hasil analisis didapatkan bahwa penggunaan moda darat menggunakan truk lebih optimal dibandingkan menggunakan tongkang hal ini dikarenakan kondisi sungai di Kalimantan Tengah yang dangkal. Dengan menggunakan metode transportasi didapatkan empat lokasi pabrik pengolahan minyak kelapa sawit. Pelabuhan hub yang terpilih berlokasi di Bagendang dan Bumi Harjo. Kedua titik tersebut dipilih karena sudah memiliki tangki timbun dan dermaga untuk ekspor CPO, selain itu pemilihan berdasarkan hasil analisa didapatkan biaya dari Pabrik PT. ATLANTIS ke Pelabuhan Bagendang dengan truk berukuran 10 ton memerlukan biaya sebesar Rp. 333.016,25/TRIP/TRUK. Pabrik PT. ATLANTIS II ke Pelabuhan Bagendang Rp. 237.868,75/TRIP/TRUK. Pabrik PT. TIGER ke Pelabuhan Bumi Harjo Rp. 475.737,50/TRIP/TRUK. PT. TIGER II merupakan pabrik yang dapat melakukan pengiriman langsung menggunakan tongkang berukuran 1800 DWT melewati sungai Barito, dengan biaya Rp.123.007.828,27,- /voyage.

  16. HIGH CYCLE FATIGUE RELIABILITY ANALYSIS ON ROTOR HUB BASED ON APPROXIMATION TECHNIQUE

    Institute of Scientific and Technical Information of China (English)

    姜年朝; 周光明; 张逊; 戴勇; 倪俊; 张志清

    2013-01-01

    A high cycle fatigue reliability analysis approach to helicopter rotor hub is proposed under working load spectrum .Automatic calculation for the approach is implemented through writing the calculating programs .In the system ,the modification of geometric model of rotor hub is controlled by several parameters ,and finite element method and S-N curve method are then employed to solve the fatigue life by automatically assigned parameters .A database between assigned parameters and fatigue life is obtained via Latin Hypercube Sampling (LHS) on toler-ance zone of rotor hub .Different data-fitting technologies are used and compared to determine a highest-precision approximation for this database .The parameters are assumed to be independent of each other and follow normal distributions .Fatigue reliability is then computed by the Monte Carlo (MC) method and the mean-value first order second moment (M FOSM ) method .Results show that the approach has high efficiency and precision ,and is suit-able for engineering application .

  17. A fractal growth model: Exploring the connection pattern of hubs in complex networks

    Science.gov (United States)

    Li, Dongyan; Wang, Xingyuan; Huang, Penghe

    2017-04-01

    Fractal is ubiquitous in many real-world networks. Previous researches showed that the strong disassortativity between the hub-nodes on all length scales was the key principle that gave rise to the fractal architecture of networks. Although fractal property emerged in some models, there were few researches about the fractal growth model and quantitative analyses about the strength of the disassortativity for fractal model. In this paper, we proposed a novel inverse renormalization method, named Box-based Preferential Attachment (BPA), to build the fractal growth models in which the Preferential Attachment was performed at box level. The proposed models provided a new framework that demonstrated small-world-fractal transition. Also, we firstly demonstrated the statistical characteristic of connection patterns of the hubs in fractal networks. The experimental results showed that, given proper growing scale and added edges, the proposed models could clearly show pure small-world or pure fractal or both of them. It also showed that the hub connection ratio showed normal distribution in many real-world networks. At last, the comparisons of connection pattern between the proposed models and the biological and technical networks were performed. The results gave useful reference for exploring the growth principle and for modeling the connection patterns for real-world networks.

  18. Simulation study on three casting processes for a marine propeller hub body

    Directory of Open Access Journals (Sweden)

    Wang Tongmin

    2013-11-01

    Full Text Available The mold filling and solidification process of a marine propeller hub were simulated using ProCAST? Three casting processes ?gravity casting, centrifugal casting and low pressure casting ?were compared in order to get the best process. The heat transfer coefficient of the casting/mold interface was determined using a reverse method. The simulated results of velocity, temperature and shrinkage porosity distribution were discussed in detail for the three casting processes. A smooth filling was found in all three casting processes, especially the low pressure casting exhibiting a better filling performance than the other two, but the solidification processes were different. The casting did not experience the sequential solidification, and the feeding paths were blocked, leading to shrinkage porosity defects in the riser and the bottom of the casting in gravity casting and in the upper zone of the casting in low pressure casting. While, the sequential solidification was well controlled in the solidification process of centrifugal casting, and majority of the shrinkage porosity defects can only be observed in the riser. It could be concluded that the centrifugal casting process is the most suitable casting process for the production of propeller hub body. The casting experiments verified the simulation results, and a defect-free propeller hub was obtained by centrifugal casting with a rotational speed of 150 r.in-1.

  19. Multi-task connectivity reveals flexible hubs for adaptive task control

    Science.gov (United States)

    Cole, Michael W.; Reynolds, Jeremy R.; Power, Jonathan D.; Repovs, Grega; Anticevic, Alan; Braver, Todd S.

    2013-01-01

    Extensive evidence suggests the human ability to adaptively implement a wide variety of tasks is preferentially due to the operation of a fronto-parietal brain network. We hypothesized that this network’s adaptability is made possible by ‘flexible hubs’ – brain regions that rapidly update their pattern of global functional connectivity according to task demands. We utilized recent advances in characterizing brain network organization and dynamics to identify mechanisms consistent with the flexible hub theory. We found that the fronto-parietal network’s brain-wide functional connectivity pattern shifted more than other networks’ across a variety of task states, and that these connectivity patterns could be used to identify the current task. Further, these patterns were consistent across practiced and novel tasks, suggesting reuse of flexible hub connectivity patterns facilitates adaptive (novel) task performance. Together, these findings support a central role for fronto-parietal flexible hubs in cognitive control and adaptive implementation of task demands generally. PMID:23892552

  20. Unsteady Velocity Measurements Taken Behind a Model Helicopter Rotor Hub in Forward Flight

    Science.gov (United States)

    Berry, John D.

    1997-01-01

    Drag caused by separated flow behind the hub of a helicopter has an adverse effect on aerodynamic performance of the aircraft. To determine the effect of separated flow on a configuration used extensively for helicopter aerodynamic investigations, an experiment was conducted using a laser velocimeter to measure velocities in the wake of a model helicopter hub operating at Mach-scaled conditions in forward flight. Velocity measurements were taken using a laser velocimeter with components in the vertical and downstream directions. Measurements were taken at 13 stations downstream from the rotor hub. At each station, measurements were taken in both a horizontal and vertical row of locations. These measurements were analyzed for harmonic content based on the rotor period of revolution. After accounting for these periodic velocities, the remaining unsteady velocities were treated as turbulence. Turbulence intensity distributions are presented. Average turbulent intensities ranged from approximately 2 percent of free stream to over 15 percent of free stream at specific locations and azimuths. The maximum average value of turbulence was located near the rear-facing region of the fuselage.

  1. Continuous Integration for Concurrent MOOSE Framework and Application Development on GitHub

    Directory of Open Access Journals (Sweden)

    Andrew E. Slaughter

    2015-11-01

    Full Text Available For the past several years, Idaho National Laboratory’s MOOSE framework team has employed modern software engineering techniques (continuous integration, joint application/framework source code repos- itories, automated regression testing, etc. in developing closed-source multiphysics simulation software (Gaston et al., 'Journal of Open Research Software' vol. 2, article e10, 2014. In March 2014, the MOOSE framework was released under an open source license on GitHub, significantly expanding and diversifying the pool of current active and potential future contributors on the project. Despite this recent growth, the same philosophy of concurrent framework and application development continues to guide the project’s development roadmap. Several specific practices, including techniques for managing multiple repositories, conducting automated regression testing, and implementing a cascading build process are discussed in this short paper. Special attention is given to describing the manner in which these practices naturally synergize with the GitHub API and GitHub-specific features such as issue tracking, Pull Requests, and project forks.

  2. Toxické látky vyšších hub

    OpenAIRE

    Ascherová, Adriana

    2009-01-01

    Tato práce je věnovaná problematice toxických látek vyšších hub. Tematicky je rozčleněna do tří oddílů. V první části se zabývá chemickým složením hub, kde klade hlavní důraz na obsah těžkých kovů a léčivých látek. Následující oddíl je zaměřen na houby jedovaté, jejich nejvýznamnější zástupce a mechanismus působení jedů. Část třetí objasňuje problematiku hub jedlých a otravy, které mohou způsobit. Především se jedná o biogenní aminy, práce popisuje jejich chemické složení, vznik, strukturu a ...

  3. The air transportation hub-and-spoke design problem: comparison between a continuous and a discrete solution method

    Directory of Open Access Journals (Sweden)

    Guina Sotomayor Alzamora

    2013-12-01

    Full Text Available The hub-and-spoke network design problem, also known as the hub location problem, aims to find the concentration points in a given network flow so that the sum of the distances of the linkages is minimized. In this work, we compare discrete solutions of this problem, given by the branch-and-cut method applied to the p-hub median model, with continuous solutions, given by the hyperbolic smoothing technique applied to a min-sum-min model. Computational experiments for particular instances of the Brazilian air transportation system, with the number of hubs varying from 2 to 8, are conducted with the support of a discretization heuristic and the Voronoi diagram.

  4. HuB localizes to polysomes and alters C/EBP-beta expression in 3T3-L1 adipocytes.

    Science.gov (United States)

    Gantt, Kira R; Jain, Renu G; Dudek, Ronald W; Pekala, Phillip H

    2004-01-16

    The RNA binding protein HuB was ectopically expressed in 3T3-L1 preadipocytes and localized primarily to the nucleus, as the cells differentiated HuB redistributed to the cytosol and on analysis localized to the dense polysomes. Electron micrographs confirm association of HuB with the ribosomes in the adipocytes consistent with a proposed role in control of translation and mRNA stability. Examination of the expression of C/EBP-beta in the cells expressing HuB relative to the parental 3T3-L1 adipocytes demonstrated an alteration in the LAP to LIP ratio. The data support a role for endogenous Hu proteins in the differentiation process, potentially affecting the rate of differentiation by controlling the concentration of the dominant negative transcription inhibitor, LIP.

  5. Parametric Investigation of the Effect of Hub Pitching Moment on Blade Vortex Interaction (BVI) Noise of an Isolated Rotor

    Science.gov (United States)

    2016-05-19

    1 Parametric Investigation of the Effect of Hub Pitching Moment on Blade Vortex Interaction (BVI) Noise of an Isolated Rotor Carlos Malpica...radiation. Objective The aim of this study is to investigate the sensitivity of BVI noise radiation to changes in the hub pitch moment trim state...calculations the aerodynamic loads on the blades were evaluated at azimuth intervals of 15 deg. The relatively large time (azimuth) step is

  6. Dynamically Allocated Hub in Task-Evoked Network Predicts the Vulnerable Prefrontal Locus for Contextual Memory Retrieval in Macaques.

    Directory of Open Access Journals (Sweden)

    Takahiro Osada

    2015-06-01

    Full Text Available Neuroimaging and neurophysiology have revealed that multiple areas in the prefrontal cortex (PFC are activated in a specific memory task, but severity of impairment after PFC lesions is largely different depending on which activated area is damaged. The critical relationship between lesion sites and impairments has not yet been given a clear mechanistic explanation. Although recent works proposed that a whole-brain network contains hubs that play integrative roles in cortical information processing, this framework relying on an anatomy-based structural network cannot account for the vulnerable locus for a specific task, lesioning of which would bring impairment. Here, we hypothesized that (i activated PFC areas dynamically form an ordered network centered at a task-specific "functional hub" and (ii the lesion-effective site corresponds to the "functional hub," but not to a task-invariant "structural hub." To test these hypotheses, we conducted functional magnetic resonance imaging experiments in macaques performing a temporal contextual memory task. We found that the activated areas formed a hierarchical hub-centric network based on task-evoked directed connectivity, differently from the anatomical network reflecting axonal projection patterns. Using a novel simulated-lesion method based on support vector machine, we estimated severity of impairment after lesioning of each area, which accorded well with a known dissociation in contextual memory impairment in macaques (impairment after lesioning in area 9/46d, but not in area 8Ad. The predicted severity of impairment was proportional to the network "hubness" of the virtually lesioned area in the task-evoked directed connectivity network, rather than in the anatomical network known from tracer studies. Our results suggest that PFC areas dynamically and cooperatively shape a functional hub-centric network to reallocate the lesion-effective site depending on the cognitive processes, apart from

  7. Dynamically Allocated Hub in Task-Evoked Network Predicts the Vulnerable Prefrontal Locus for Contextual Memory Retrieval in Macaques.

    Science.gov (United States)

    Osada, Takahiro; Adachi, Yusuke; Miyamoto, Kentaro; Jimura, Koji; Setsuie, Rieko; Miyashita, Yasushi

    2015-06-01

    Neuroimaging and neurophysiology have revealed that multiple areas in the prefrontal cortex (PFC) are activated in a specific memory task, but severity of impairment after PFC lesions is largely different depending on which activated area is damaged. The critical relationship between lesion sites and impairments has not yet been given a clear mechanistic explanation. Although recent works proposed that a whole-brain network contains hubs that play integrative roles in cortical information processing, this framework relying on an anatomy-based structural network cannot account for the vulnerable locus for a specific task, lesioning of which would bring impairment. Here, we hypothesized that (i) activated PFC areas dynamically form an ordered network centered at a task-specific "functional hub" and (ii) the lesion-effective site corresponds to the "functional hub," but not to a task-invariant "structural hub." To test these hypotheses, we conducted functional magnetic resonance imaging experiments in macaques performing a temporal contextual memory task. We found that the activated areas formed a hierarchical hub-centric network based on task-evoked directed connectivity, differently from the anatomical network reflecting axonal projection patterns. Using a novel simulated-lesion method based on support vector machine, we estimated severity of impairment after lesioning of each area, which accorded well with a known dissociation in contextual memory impairment in macaques (impairment after lesioning in area 9/46d, but not in area 8Ad). The predicted severity of impairment was proportional to the network "hubness" of the virtually lesioned area in the task-evoked directed connectivity network, rather than in the anatomical network known from tracer studies. Our results suggest that PFC areas dynamically and cooperatively shape a functional hub-centric network to reallocate the lesion-effective site depending on the cognitive processes, apart from static anatomical

  8. The Redox Potential of Hot Springs in Taiwan

    Directory of Open Access Journals (Sweden)

    Wen-Fu Chen and Menghau Sung

    2009-01-01

    Full Text Available Scientists began acquiring the basic of geology, occurrence, water temperature and chemistry of hot springs in Tai wan over a century ago. However, data regarding redox potential and important redox couples still remains limited. This study explores the redox status of hot springs in Taiwan by measuring Eh in the field and by determining the concentrations of commonly found redox couples, i.e., O2/H2O, NO3 -/NH4 +, and HS-/SO4 -2. Water samples were collected at hot spring discharge pools or the heads of water wells using a pump. A total of 11 hot springs located at 9 different locations across Taiwan were surveyed. The measured values of Eh ranging from -23 to -277 mV indicate reducing conditions. Most of the water samples from the hot spring sources contained sulfide and ammonium. In the Tatun Volcano Group, hot springs originating from a mixture of fumarolic gas and stream water contained high concentrations of hydrogen sulfide as the dominant reducing agent. Ammonium, with concentrations ranging from 1 to 55 mg L-1, is another important electron donor. The finding revealed that there were negative Eh measured-values for dissolved oxy gen-contained waters, both in the field and in the laboratory. The presence of sulfide or ammonium was also detected in the samples. These results confirm that the Eh sensor displayed a more height ened sensitivity to sulfide and ammonium than dissolved oxygen and nitrate. Hot springs with deep circulations (Samples S1-S4 and M1-M4 lack in oxygen gas and may re act with mineral reducers such that they will consequently be in a reducing state rather than oxidizing. Hot spring waters containing dissolved ox y gen (S2, S4, and M2 and nitrate (S3, S4, and M2-M4 most likely have mixed with shallow groundwaters. Discussions reveal implications for redox potentials and redox couples for arsenic speciation, disinfection of ammonium-containing hot springs for the spa industry as well as the possibility of using redox

  9. Structural insights of microbial community of Deulajhari (India hot spring using 16s-rRNA based metagenomic sequencing

    Directory of Open Access Journals (Sweden)

    Archana Singh

    2016-03-01

    Full Text Available Insights about the distribution of the microbial community prove to be the major goal of understanding microbial ecology which remains to be fully deciphered. Hot springs being hub for the thermophilic microbiota attract the attention of the microbiologists. Deulajhari hot spring cluster is located in the Angul district of Odisha. Covered within a wooded area, Deulajhari hot spring is also fed by the plant litter resulting in a relatively high amount of total organic content (TOC. For the first time, Illumina sequencing based biodiversity analysis of microbial composition is studied through amplicon metagenome sequencing of 16s rRNA targeting V3‐V4 region using metagenomic DNA from the hot spring sediment. Over 28 phyla were detected through the amplicon metagenome sequencing of which the most dominating phyla at the existing physiochemical parameters like; temperature 69 °C, pH 8.09, electroconductivity 0.025 dSm−1 and total organic carbon 0.356%, were Proteobacteria (88.12%, Bacteriodetes (10.76%, Firmicutes (0.35%, Spirochetes (0.18% and chloroflexi (0.11%. Approximately 713 species were observed at the above physiochemical parameters. The analysis of the metagenome provides the quantitative insights into microbial populations based on the sequence data in Deulajhari hot spring. Metagenome sequence is deposited to SRA database which is available at NCBI with accession no. SRX1459736.

  10. Finding Spring on Planet X

    Science.gov (United States)

    Simoson, Andrew J.

    2007-01-01

    For a given orbital period and eccentricity, we determine the maximum time lapse between the winter solstice and the spring equinox on a planet. In addition, given an axial precession path, we determine the effects on the seasons. This material can be used at various levels to illustrate ideas such as periodicity, eccentricity, polar coordinates,…

  11. Sources of antibiotics: Hot springs.

    Science.gov (United States)

    Mahajan, Girish B; Balachandran, Lakshmi

    2017-06-15

    The discovery of antibiotics heralded an era of improved health care. However, the over-prescription and misuse of antibiotics resulted in the development of resistant strains of various pathogens. Since then, there has been an incessant search for discovering novel compounds from bacteria at various locations with extreme conditions. The soil is one of the most explored locations for bioprospecting. In recent times, hypersaline environments and symbiotic associations have been investigated for novel antimicrobial compounds. Among the extreme environments, hot springs are comparatively less explored. Many researchers have reported the presence of microbial life and secretion of antimicrobial compounds by microorganisms in hot springs. A pioneering research in the corresponding author's laboratory resulted in the identification of the antibiotic Fusaricidin B isolated from a hot spring derived eubacteria, Paenibacillus polymyxa, which has been assigned a new application for its anti-tubercular properties. The corresponding author has also reported anti-MRSA and anti-VRE activity of 73 bacterial isolates from hot springs in India. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. Finding Spring on Planet X

    Science.gov (United States)

    Simoson, Andrew J.

    2007-01-01

    For a given orbital period and eccentricity, we determine the maximum time lapse between the winter solstice and the spring equinox on a planet. In addition, given an axial precession path, we determine the effects on the seasons. This material can be used at various levels to illustrate ideas such as periodicity, eccentricity, polar coordinates,…

  13. NOVA Spring 2000 Teacher's Guide.

    Science.gov (United States)

    Colombo, Luann; Gregoire, Tanya; Ransick, Kristina; Sammons, Fran Lyons; Sammons, James

    This teacher's guide complements six programs that aired on the Public Broadcasting System (PBS) in the spring of 2000. Programs include: (1) "Lost on Everest"; (2) "Lost Tribes of Israel"; (3) "Crocodiles"; (4) "Lost at Sea: The Search for Longitude"; (5) "Global Warming"; and (6) "Secrets of…

  14. Spring for It: First Novels

    Science.gov (United States)

    Hoffert, Barbara

    2010-01-01

    How do publishers describe the first novels they will be releasing this spring and summer? "Amazing," "fabulous," and "unique" are words that pop up frequently, though hats off to one publicist forthright or cheeky enough to call a work "weird Western/horror." The proof of such praise is in the reading, but why not check out this preview of first…

  15. Spring for It: First Novels

    Science.gov (United States)

    Hoffert, Barbara

    2010-01-01

    How do publishers describe the first novels they will be releasing this spring and summer? "Amazing," "fabulous," and "unique" are words that pop up frequently, though hats off to one publicist forthright or cheeky enough to call a work "weird Western/horror." The proof of such praise is in the reading, but why not check out this preview of first…

  16. Brokered virtual hubs for facilitating access and use of geospatial Open Data

    Science.gov (United States)

    Mazzetti, Paolo; Latre, Miguel; Kamali, Nargess; Brumana, Raffaella; Braumann, Stefan; Nativi, Stefano

    2016-04-01

    Open Data is a major trend in current information technology scenario and it is often publicised as one of the pillars of the information society in the near future. In particular, geospatial Open Data have a huge potential also for Earth Sciences, through the enablement of innovative applications and services integrating heterogeneous information. However, open does not mean usable. As it was recognized at the very beginning of the Web revolution, many different degrees of openness exist: from simple sharing in a proprietary format to advanced sharing in standard formats and including semantic information. Therefore, to fully unleash the potential of geospatial Open Data, advanced infrastructures are needed to increase the data openness degree, enhancing their usability. In October 2014, the ENERGIC OD (European NEtwork for Redistributing Geospatial Information to user Communities - Open Data) project, funded by the European Union under the Competitiveness and Innovation framework Programme (CIP), has started. In response to the EU call, the general objective of the project is to "facilitate the use of open (freely available) geographic data from different sources for the creation of innovative applications and services through the creation of Virtual Hubs". The ENERGIC OD Virtual Hubs aim to facilitate the use of geospatial Open Data by lowering and possibly removing the main barriers which hampers geo-information (GI) usage by end-users and application developers. Data and services heterogeneity is recognized as one of the major barriers to Open Data (re-)use. It imposes end-users and developers to spend a lot of effort in accessing different infrastructures and harmonizing datasets. Such heterogeneity cannot be completely removed through the adoption of standard specifications for service interfaces, metadata and data models, since different infrastructures adopt different standards to answer to specific challenges and to address specific use-cases. Thus

  17. On the Improvement of Numerical Weather Prediction by Assimilation of Hub Height Wind Information in Convection-Resulted Models

    Science.gov (United States)

    Declair, Stefan; Stephan, Klaus; Potthast, Roland

    2015-04-01

    Determining the amount of weather dependent renewable energy is a demanding task for transmission system operators (TSOs). In the project EWeLiNE funded by the German government, the German Weather Service and the Fraunhofer Institute on Wind Energy and Energy System Technology strongly support the TSOs by developing innovative weather- and power forecasting models and tools for grid integration of weather dependent renewable energy. The key in the energy prediction process chain is the numerical weather prediction (NWP) system. With focus on wind energy, we face the model errors in the planetary boundary layer, which is characterized by strong spatial and temporal fluctuations in wind speed, to improve the basis of the weather dependent renewable energy prediction. Model data can be corrected by postprocessing techniques such as model output statistics and calibration using historical observational data. On the other hand, latest observations can be used in a preprocessing technique called data assimilation (DA). In DA, the model output from a previous time step is combined such with observational data, that the new model data for model integration initialization (analysis) fits best to the latest model data and the observational data as well. Therefore, model errors can be already reduced before the model integration. In this contribution, the results of an impact study are presented. A so-called OSSE (Observation Simulation System Experiment) is performed using the convective-resoluted COSMO-DE model of the German Weather Service and a 4D-DA technique, a Newtonian relaxation method also called nudging. Starting from a nature run (treated as the truth), conventional observations and artificial wind observations at hub height are generated. In a control run, the basic model setup of the nature run is slightly perturbed to drag the model away from the beforehand generated truth and a free forecast is computed based on the analysis using only conventional

  18. Development of a Composite Leaf Spring for a Light Commercial Vehicle (Tata Magic

    Directory of Open Access Journals (Sweden)

    Vivek Rai

    2013-09-01

    Full Text Available Present time the main issue of automobile industry are weight reduction. The automobile industry has looking for any implementation or modification to reduce the weight of the vehicle. The suspension leaf spring is one of the potential items for weight reduction in automobile as it accounts for 10% to 20% of the unsprung weight. The introduction of composite leaf spring made of glass fiber rein forced plastic (GFRP has made it to possible to reduce the weight of spring without any reduction on load carrying capacity and stiffness. The achievement of weight reduction with adequate improvement of mechanical properties has made composite a very good replacement material for conventional steel spring. This work deals with the replacement of multi-leaf steel spring with mono composite leaf spring for the LCV. Suspension system in an automobile determines the riding comfort of passengers and the amount of damage to the vehicle. The main function of leaf spring assembly as suspension element is not only to support vertical load, but also to isolate road-induced vibrations. the behavior of leaf spring is complicated due to its clamping effects and inter-leaf contact etc. the objective of this paper is to replace the multi-leaf steel spring by mono composite leaf spring for the same load carrying capacity and stiffness. Since the composite materials have more elastic strain energy storage capacity and high strength-to-weight ratio as compared to those of steel. It is possible to reduce the weight of the leaf spring without any reduction on load carrying capacity and stiffness. The design constraints were limiting stresses and displacement. Modeling and analysis of both the steel and composite leaf springs have been done using ANSYS software.

  19. Removal of arthropods in the spring “trash floods”

    Science.gov (United States)

    Flooding of cranberry marshes is a common practice in the spring. It is intended primarily to clean out detritus while protecting against frost danger. The water is sometimes held for longer periods to reduce pest populations. We examined the detritus being hauled off of flooded beds for any evidenc...

  20. Gene transcription profiles associated with inter-modular hubs and connection distance in human functional magnetic resonance imaging networks

    Science.gov (United States)

    Vértes, Petra E.; Rittman, Timothy; Whitaker, Kirstie J.; Romero-Garcia, Rafael; Váša, František; Wagstyl, Konrad; Fonagy, Peter; Dolan, Raymond J.; Jones, Peter B.; Goodyer, Ian M.

    2016-01-01

    Human functional magnetic resonance imaging (fMRI) brain networks have a complex topology comprising integrative components, e.g. long-distance inter-modular edges, that are theoretically associated with higher biological cost. Here, we estimated intra-modular degree, inter-modular degree and connection distance for each of 285 cortical nodes in multi-echo fMRI data from 38 healthy adults. We used the multivariate technique of partial least squares (PLS) to reduce the dimensionality of the relationships between these three nodal network parameters and prior microarray data on regional expression of 20 737 genes. The first PLS component defined a transcriptional profile associated with high intra-modular degree and short connection distance, whereas the second PLS component was associated with high inter-modular degree and long connection distance. Nodes in superior and lateral cortex with high inter-modular degree and long connection distance had local transcriptional profiles enriched for oxidative metabolism and mitochondria, and for genes specific to supragranular layers of human cortex. In contrast, primary and secondary sensory cortical nodes in posterior cortex with high intra-modular degree and short connection distance had transcriptional profiles enriched for RNA translation and nuclear components. We conclude that, as predicted, topologically integrative hubs, mediating long-distance connections between modules, are more costly in terms of mitochondrial glucose metabolism. This article is part of the themed issue ‘Interpreting BOLD: a dialogue between cognitive and cellular neuroscience’. PMID:27574314

  1. Portrait of a Geothermal Spring, Hunter's Hot Springs, Oregon.

    Science.gov (United States)

    Castenholz, Richard W

    2015-01-27

    Although alkaline Hunter's Hot Springs in southeastern Oregon has been studied extensively for over 40 years, most of these studies and the subsequent publications were before the advent of molecular methods. However, there are many field observations and laboratory experiments that reveal the major aspects of the phototrophic species composition within various physical and chemical gradients of these springs. Relatively constant temperature boundaries demark the upper boundary of the unicellular cyanobacterium, Synechococcus at 73-74 °C (the world-wide upper limit for photosynthesis), and 68-70 °C the upper limit for Chloroflexus. The upper limit for the cover of the filamentous cyanobacterium, Geitlerinema (Oscillatoria) is at 54-55 °C, and the in situ lower limit at 47-48 °C for all three of these phototrophs due to the upper temperature limit for the grazing ostracod, Thermopsis. The in situ upper limit for the cyanobacteria Pleurocapsa and Calothrix is at ~47-48 °C, which are more grazer-resistant and grazer dependent. All of these demarcations are easily visible in the field. In addition, there is a biosulfide production in some sections of the springs that have a large impact on the microbiology. Most of the temperature and chemical limits have been explained by field and laboratory experiments.

  2. Fish Springs NWR Water Use Report : 2010

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report contains locations and water use at Fish Springs National Wildlife Refuge (NWR) for 2010. A general background is presented on historical spring water...

  3. Eddy-mediated biological productivity in the Bay of Bengal during fall and spring intermonsoons

    Digital Repository Service at National Institute of Oceanography (India)

    PrasannaKumar, S.; Nuncio, M.; Ramaiah, N.; Sardesai, S.; Narvekar, J.; Fernandes, V.; Paul, J.T.

    the temperature, which varied from 3oC to 7oC at 120 m depth. Maximum depression of temperature was associated with spring-time eddies in the northern Bay, where subsurface stability was low. The reduced water column stability in spring leads to greater eddy-pumping...

  4. Large Capacity Constant Spring Support Hanger Design Optimization

    Institute of Scientific and Technical Information of China (English)

    HU Xian-wei

    2012-01-01

    This article discussed how to improve constant force performance of the large capacity constant spring support hangers. Large deviations have been found between product testing results and theoretical calculations after years of research and testing. The deviations mainly are caused by internal frictions inside the constant spring support hangers. By reducing or properly using internal frictions, consistent results between testing and theoretical calculation have been achieved. Based on product performance testing results recently, constant force performance of hangers has been improved greatly by adopting new methodology.

  5. Theory and Practice of Oxide Inclusion Composition and Morphology Control in Spring Steel Production

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    In order to control the composition, morphology and size distribution of oxide inclusions in spring steel, the relationship between the content or activity of aluminum and calcium in molten steel and compositions of oxide inclusion precipitated at different temperatures was determined based on thermodynamic equilibrium for spring steel 60Si2MnA, and has been verified by practice. The size distribution of non-metallic inclusions electrolytically extracted from specimens of hot rolled spring steel was determined by image analyzer. The results show that there are a great deal of large inclusions in spring steel produced by the conventional process, and the quantity and the size of large inclusions in spring steel produced by new process are largely reduced. As a result, the fatigue properties of the spring steel produced by new process are highly improved, and the ratio of σ-1/σb is raised from 0.451 to 0.468.

  6. Top 5 Spring Festival Customs in China

    Institute of Scientific and Technical Information of China (English)

    梁小明

    2016-01-01

    The Spring Festival is the largest and most important festival in China.It is the first day of the lunar calendar~1 and usually occurs somewhere between January30 and February 20,heralding~2 the beginning of spring,thus it is known as the Spring Festival.1.Spring Couplets On the Chinese New Year,families in China decorate their front doors with poetic couplets

  7. An Evaluation of Chinese Spring Festival

    Institute of Scientific and Technical Information of China (English)

    李艳蕊

    2012-01-01

    Nowadays,many Chinese people felt that Spring Festival is bored;feeling of celebrating Spring Festival is not as strong as before.Some experts stated that the physical part of Spring Festival shrouded the cultural celebrations.This article analysis the phenomenon through comparing how Chinese people had Spring Festivals in the past and now,and comparing different economic status Chinese people have in these two periods.

  8. Qatar and the Arab Spring

    KAUST Repository

    Coates Ulrichsen, Kristian

    2014-11-15

    This chapter examines how Qatar assumed an extraordinarily visible and interventionist role during the Arab Spring upheaval in 2011. It argues that, after an initial period of caution in January 2011, Qatari officials quickly recognised the changing contours of the Arab Spring and pragmatically readjusted their policy-responses. The lack of domestic constraints on decision-making enabled officials, led by the Emir and the Prime minister, to reposition Qatar (somewhat improbably) as a champion of the popular uprisings in North Africa and later as a key external player in the Syrian Civil War. The chapter also provides historical context to Qatar’s close relationship with the Muslim Brotherhood, and documents why Qatari officials saw the outbreak of the uprisings as far more of an opportunity than a challenge.

  9. Herbicide contamination and dispersion pattern in lowland springs.

    Science.gov (United States)

    Laini, Alex; Bartoli, Marco; Lamastra, Lucrezia; Capri, Ettore; Balderacchi, Matteo; Trevisan, Marco

    2012-11-01

    Herbicides reduce the diversity of flora and fauna in freshwater ecosystems and also contaminate groundwater due to leaching. Herbicide contamination can be a serious threat for all groundwater-dependent ecosystems (GDE), altering their chemical and biological quality. Successful management to protect GDE is dependent on detailed knowledge of the hydrogeological and hydrochemical features of the surrounding environment. We consider the possible diffuse contamination by herbicides of groundwater and of GDE as lowland springs, semi-artificial ecosystems with elevated biodiversity. The main objectives of the present work were thus: (1) to map herbicide contamination in lowland springs, (2) to evaluate the potential risk for biota and (3) to quantify the extent of the area from which the herbicide use can affect the water quality of lowland springs. In June and August 2009, nearly 23 springs within the Po River Plain (Northern Italy) were sampled and analyzed for five herbicides used to control weeds in maize. Hydrogeological properties, half-lives of the herbicides and their concentrations in both groundwater and springs were used to quantify the area from which the contamination could originate. Such evaluation was performed by means of GIS techniques. Terbuthylazine were the only herbicide found, together with its metabolite desethylterbuthylazine. In 16 out of 84 measurements, their concentrations were above the threshold for drinking water; however, they were always below the ecotoxicological end-points of aquatic flora and fauna. Spatial analyses reveal that the theoretical area from which herbicides can contaminate spring water is within a distance varying between a few and 1800 m. Our findings indicate that conservation plans should focus on the fields adjacent to or surrounding the springs and should address the optimization of irrigation practices, restoration of buffer strips, crop rotation and in general more sustainable agricultural practices in the

  10. KUNMING: The City of Spring

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ Kunming is the political, economic and cultural center of Yunnan province and the most popular center for tourism in Southwest China. Kunming enjoys a pleasant climate and does its best to live up to its title of "the City of Spring". Whenever you are planning to go, the temperature is always pleasant. With its convenient transport links in and out of the city, Kunming welcomes tens of thousands of tourists every day.

  11. The Arab Spring in Jordan

    OpenAIRE

    Eriksson, Elsa Annaklara; Hansen, Ditte Ingemann

    2013-01-01

    This project contains analysis and discussion of several social movements in Jordan. The uprising in Jordan and demands for more democratization are inspired by the Arab Spring observed in the Middle East. The most highlighted Jordanian social movements being the religious Muslim Brotherhood, the radical Salafi Movement and the newly proclaimed Popular Mobilization. Questions concerning the identification of them, their goals and ways of mobilizing and the hindrances for these movements to mo...

  12. Spring Framework 5: Themes & Trends

    CERN Document Server

    CERN. Geneva

    2017-01-01

    Spring Framework 5.0/5.1, scheduled for release in early/late 2017, focuses on several key themes: reactive web applications based on Reactive Streams, comprehensive support for JDK 9 and HTTP/2, as well as the latest API generations in the Enterprise Java ecosystem. This talk presents the overall story in the context of wider industry trends, highlighting Spring’s unique programming model strategy.

  13. Controlling proteins through molecular springs.

    Science.gov (United States)

    Zocchi, Giovanni

    2009-01-01

    We argue that the mechanical control of proteins-the notion of controlling chemical reactions and processes by mechanics-is conceptually interesting. We give a brief review of the main accomplishments so far, leading to our present approach of using DNA molecular springs to exert controlled stresses on proteins. Our focus is on the physical principles that underlie both artificial mechanochemical devices and natural mechanisms of allostery.

  14. Strategic Studies Quarterly- Spring 2016

    Science.gov (United States)

    2016-01-01

    Khyber Pakhtunkhwa, bordering Afghanistan. A number of analysts agree that if conflict breaks out with India, Pakistan would immediately rede - ploy...the military should not risk its capacity to fight just to become an instrument of social progress but at the same rook pride in ending the...the " social experiments" conducted during his tenure are not yet known. The former Secretary STRATEGIC STUDIES QuARTERLY + SPRING 2016 [ 149] Book

  15. The FUTUREVOLC Supersite's e-Infrastructure - A multidisciplinary data hub and data service for Icelandic Volcanoes

    Science.gov (United States)

    Vogfjörd, Kristín S.; Sigmundsson, Freysteinn; Sverrisson, Sverrir Th.; Sigurdsson, Sigurdur F.; Ófeigsson, Benedikt G.; Arnarsson, Ólafur S.; Kristinsson, Ingvar; Ilyinskaya, Evgenia; Oddsdóttir, Thorarna Ýr; Bergsveinsson, Sölvi Th.; Hjartansson, Kristján R.

    2014-05-01

    The FUTUREVOLC volanological supersite will establish a data hub and dataservice, where researchers, hazard managers and other stake holders can freely obtain access to multidisciplinary data and products on activity, unrest and eruptions at Icelandic volcanoes. The supersite is firmly founded on close interaction between the main Icelandic volcanological research and monitoring institutions, in coordination with expertise from European researchers participating in FUTUREVOLC. The hub is located at the Icelandic Meteorological Office (IMO), an institution responsible for monitoring and archiving data on all natural hazards in Iceland and, which also has a mandate as the state volcano observatory. This association will ensure a long-term sustainable data service. The data accessible at the hub include in-situ and space-based observations, products and models from all the relevant disciplines contributing to volcanological research and local as well as cross-border hazard management, i.e. Earth sciences, atmospheric science, hydrology, remote sensing and space science. Access to the data will be in compliance with the access policy of the GEO (Group on Earth Observations), providing registered users with easy and timely access to data and products of documented quality. This commitment has already led to the acceptance of FUTUREVOLC as a permanent geohazard supersite by CEOS (Committee on Earth Observation Satellites), which will ensure access to additional satellite data and products on Icelandic volcanoes. To facilitate services to seismological data at the supersite hub, the IMO is reconstructing its existing data base and utilizing the SeisComp3 software to manage waveform and parameter data. The accompanying ArcLink component will be used to provide access to event data and waveforms. Access to GPS data will be provided by the GSAC web service which has been installed at the IMO through collaboration with UNAVCO. If appropriate, the format and data base

  16. 14 CFR 27.687 - Spring devices.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Spring devices. 27.687 Section 27.687... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction Control Systems § 27.687 Spring devices. (a) Each control system spring device whose failure could cause flutter or other unsafe...

  17. 14 CFR 23.687 - Spring devices.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Spring devices. 23.687 Section 23.687 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS... Systems § 23.687 Spring devices. The reliability of any spring device used in the control system must...

  18. 14 CFR 29.687 - Spring devices.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Spring devices. 29.687 Section 29.687... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction Control Systems § 29.687 Spring devices. (a) Each control system spring device whose failure could cause flutter or other unsafe...

  19. Spring-forward in composite plate elements

    NARCIS (Netherlands)

    Wijskamp, Sebastiaan; Lamers, E.A.D.; Akkerman, Remko; Banabic, D.

    2005-01-01

    Spring-forward is a distortion of corner sections in continuous fibre reinforced composite products. The linear thermoelastic prediction for the spring-forward of single curved geometries is incorporated in a FE formulation for plate elements in order to simulate the spring-forward of doubly curved

  20. Radon in Himalayan springs: a geohydrological control

    Energy Technology Data Exchange (ETDEWEB)

    Choubey, V.M.; Bartarya, S.K. [Wadia Inst. of Himalayan Geology, Dehra Dun (India); Ramola, R.C. [Garhwal Univ., Srinagar, Uttar Pradesh (India). Dept. of Physics

    2000-04-01

    This paper presents the results of radon measurements in springs of the Himalayan region by using radon emanometry technique. The radon was measured in different springs, draining from different geohydrological setups, and from stream water in order to find the geohydrological control over radon concentration in groundwater emanating in the form of spring. The radon values were found to vary from 0.4 Bq/l to 887 Bq/l, being observed lowest for a turbulent stream and highest for the spring. The radon values were recorded highest in the springs draining through gneiss, granite, mylonite, etc. Radon concentrations have been related with four spring types viz. fracture-joint related spring, fault-lineament related spring, fluvial related spring and colluvial related spring, showing geohydrological characteristics of the rocks through which they are emanating. The high radon concentration in fracture-joint and fault-lineament springs is related to increased ratio of rock surface area to water volume and uranium mineralisation in the shear zones present in the close vicinity of fault and thrust. The low concentration of radon in fluvial and colluvial springs is possibly because of high transmissivity and turbulent flow within such deposits leading to natural de-emanation of gases. (orig.)

  1. Spring-forward in composite plate elements

    NARCIS (Netherlands)

    Wijskamp, S.; Lamers, E.A.D.; Akkerman, R.

    2005-01-01

    Spring-forward is a distortion of corner sections in continuous fibre reinforced composite products. The linear thermoelastic prediction for the spring-forward of single curved geometries is incorporated in a FE formulation for plate elements in order to simulate the spring-forward of doubly curved

  2. 49 CFR 236.822 - Switch, spring.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Switch, spring. 236.822 Section 236.822 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Switch, spring. A switch equipped with a spring device which forces the points to their original...

  3. Skillful Use of Imagery in Two Odes to Spring--Comment on The Soote Season and Spring, the Sweet Spring

    Institute of Scientific and Technical Information of China (English)

    冯海荣

    2002-01-01

    The Soote Season and Spring, the Sweet Spring are two lyrics that sing the praise of spring. The common feature of the two lyrics is that the two poets depict a series of pictures of the sweet spring by rich and varied imagery for readers.When these pictures are presented to readers ,readers feel as if they are participating in them,and the enchanting beauty of spring makes readers feel intoxicated with happiness. The two poets express their different feelings toward nature.

  4. The first CERN Spring Campus

    CERN Multimedia

    CERN Bulletin

    2014-01-01

    From 14 to 16 April, the first edition of the CERN Spring Campus took place in Spain. Taking place over three intensive days, this event brought experts from CERN together at the University of Oviedo, where they met the engineers and scientists of the future in a programme of scientific and technological dissemination and cultural exchange.   The young participants of the first CERN Spring Campus and their instructors show their enthusiasm after the intensive three-day course. “This three-day school focuses on preparing young engineers for the job market, with a particular emphasis on computing,” explains Derek Mathieson, Advanced Information Systems Group Leader in the GS Department and Head of the CERN Spring Campus organising committee. “We organised talks on entrepreneurship and IT, as well as on job interviews and CV writing. It was also an important opportunity for the participants to meet CERN computing engineers to find out what it is like to work in I...

  5. Disaggregation modelling of spring discharges

    Directory of Open Access Journals (Sweden)

    Kirilova Bojilova Elena

    2004-12-01

    Full Text Available Disaggregation models are basically divided into three main groups: temporal, spatial and temporal-spatial. The focus of this paper is the application of temporal disaggregation models to disaggregate the seasonal flow in some large time intervals to sub-seasonal flows in some shorter time intervals. Two basic models are applied: the original model of Mejia and Rousselle and the corrected extended Lin model one-stage disaggregation. The flow totals from some karstic springs are used. Data for five springs in different areas of Bulgaria for the aims of the study are executed. The synthetic data generation for the chosen spring stations for a new realisation of thirty years is obtained. The multi-variate lag-one auto regressive model (AR(1 model is applied for generation of the annual flow sequences. The Lin model single- site is performed for thirty years generation period. The Lin model is an improvement compared to the original extended model. The new Lin approach succeeds in the preservation of the additivity as well as the moments. Applying the Lin model one-stage disaggregation results in consistent model parameter estimates. As a second step in the research multi-site disaggregation schemes are also applied.

  6. Neuronal dysfunction and disconnection of cortical hubs in non-demented subjects with elevated amyloid burden

    Science.gov (United States)

    Drzezga, Alexander; Van Dijk, Koene R. A.; Sreenivasan, Aishwarya; Talukdar, Tanveer; Sullivan, Caroline; Schultz, Aaron P.; Sepulcre, Jorge; Putcha, Deepti; Greve, Doug; Johnson, Keith A.; Sperling, Reisa A.

    2011-01-01

    Disruption of functional connectivity between brain regions may represent an early functional consequence of β-amyloid pathology prior to clinical Alzheimer's disease. We aimed to investigate if non-demented older individuals with increased amyloid burden demonstrate disruptions of functional whole-brain connectivity in cortical hubs (brain regions typically highly connected to multiple other brain areas) and if these disruptions are associated with neuronal dysfunction as measured with fluorodeoxyglucose-positron emission tomography. In healthy subjects without cognitive symptoms and patients with mild cognitive impairment, we used positron emission tomography to assess amyloid burden and cerebral glucose metabolism, structural magnetic resonance imaging to quantify atrophy and novel resting state functional magnetic resonance imaging processing methods to calculate whole-brain connectivity. Significant disruptions of whole-brain connectivity were found in amyloid-positive patients with mild cognitive impairment in typical cortical hubs (posterior cingulate cortex/precuneus), strongly overlapping with regional hypometabolism. Subtle connectivity disruptions and hypometabolism were already present in amyloid-positive asymptomatic subjects. Voxel-based morphometry measures indicate that these findings were not solely a consequence of regional atrophy. Whole-brain connectivity values and metabolism showed a positive correlation with each other and a negative correlation with amyloid burden. These results indicate that disruption of functional connectivity and hypometabolism may represent early functional consequences of emerging molecular Alzheimer's disease pathology, evolving prior to clinical onset of dementia. The spatial overlap between hypometabolism and disruption of connectivity in cortical hubs points to a particular susceptibility of these regions to early Alzheimer's-type neurodegeneration and may reflect a link between synaptic dysfunction and functional

  7. Interpatch foraging in honeybees-rational decision making at secondary hubs based upon time and motivation.

    Science.gov (United States)

    Najera, Daniel A; McCullough, Erin L; Jander, Rudolf

    2012-11-01

    For honeybees, Apis mellifera, the hive has been well known to function as a primary decision-making hub, a place from which foragers decide among various directions, distances, and times of day to forage efficiently. Whether foraging honeybees can make similarly complex navigational decisions from locations away from the hive is unknown. To examine whether or not such secondary decision-making hubs exist, we trained bees to forage at four different locations. Specifically, we trained honeybees to first forage to a distal site "CT" 100 m away from the hive; if food was present, they fed and then chose to go home. If food was not present, the honeybees were trained to forage to three auxiliary sites, each at a different time of the day: A in the morning, B at noon, and C in the afternoon. The foragers learned to check site CT for food first and then efficiently depart to the correct location based upon the time of day if there was no food at site CT. Thus, the honeybees were able to cognitively map motivation, time, and five different locations (Hive, CT, A, B, and C) in two spatial dimensions; these are the contents of the cognitive map used by the honeybees here. While at site CT, we verified that the honeybees could choose between 4 different directions (to A, B, C, and the Hive) and thus label it as a secondary decision-making hub. The observed decision making uncovered here is inferred to constitute genuine logical operations, involving a branched structure, based upon the premises of motivational state, and spatiotemporal knowledge.

  8. Compacted cancellous bone has a spring-back effect

    DEFF Research Database (Denmark)

    Kold, S; Bechtold, JE; Ding, Ming;

    2003-01-01

    A new surgical technique, compaction, has been shown to improve implant fixation. It has been speculated that the enhanced implant fixation with compaction could be due to a spring-back effect of compacted bone. However, such an effect has yet to be shown. Therefore we investigated in a canine...... model whether implant cavities prepared with compaction had spring back. Before killing the animals, we used one of two surgical techniques to make implant cavities of identical dimensions in both lateral femoral condyles of 7 dogs. One side had the implant cavity prepared with compaction, the other....... Thus we found a spring-back effect of compacted bone, which may be important for increasing implant fixation by reducing initial gaps between the implant and bone....

  9. Hubs and Authorities of the English Premier League for 2010-2011

    OpenAIRE

    Leznik, Michael

    2013-01-01

    In this work author applies well known web search algorithm Hyperlink - Induced Topic Search (HITS) to problem of ranking football teams in English Premier League (EPL). The algorithm allows the ranking of the teams using the notions of hubs and authorities well known for ranking pages in the World Wide Web. Results of the games introduced as a graph where losing team 'gives a link' to a winning team and, if draw registered both team give links to each other. In case of a win link is weighted...

  10. Home health monitoring – EyKos HealthHub (product design concept)

    OpenAIRE

    Phillips, Mark; Dulake, Nick; Willox, Matt; Gwilt, Ian; Craig, Claire; Auton, Kevin

    2015-01-01

    This work focused on creating a product design concept for a home health monitoring system, known as EyKos HealthHub, which is intended to be a ‘crossover product’ in the emerging medical/consumer product space. Working collaboratively with Aseptika Ltd, the team carried out product concept design and interaction design for the EyKos system, and undertook further design and prototyping work to create an object for use in research. Aseptika is carrying out technical development of this project...

  11. A New Approach for Offshore Wind Farm Energy Yields Calculation with Mixed Hub Height Wind Turbines

    DEFF Research Database (Denmark)

    Hou, Peng; Hu, Weihao; Soltani, Mohsen

    2016-01-01

    In this paper, a mathematical model for calculating the energy yields of offshore wind farm with mixed types of wind turbines is proposed. The Jensen model is selected as the base and developed to a three dimension wake model to estimate the energy yields. Since the wind turbines are with different...... hub heights, the wind shear effect is also taken into consideration. The results show that the proposed wake model is effective in calculating the wind speed deficit. The calculation framework is applicable for energy yields calculation in offshore wind farms....

  12. Unveiling Exception Handling Bug Hazards in Android Based on GitHub and Google Code Issues

    OpenAIRE

    Coelho, R.; L. Almeida; Gousios, G.; Van Deursen, A.

    2015-01-01

    This paper reports on a study mining the exception stack traces included in 159,048 issues reported on Android projects hosted in GitHub (482 projects) and Google Code (157 projects). The goal of this study is to investigate whether stack trace information can reveal bug hazards related to exception handling code that may lead to a decrease in application robustness. Overall 6,005 exception stack traces were extracted, and subjected to source code and bytecode analysis. The outcomes of this s...

  13. Abnormal intrinsic functional hubs in alcohol dependence: evidence from a voxelwise degree centrality analysis

    Directory of Open Access Journals (Sweden)

    Luo X

    2017-07-01

    Full Text Available Xiaoping Luo,1,2 Linghong Guo,1 Xi-Jian Dai,3 Qinglai Wang,2 Wenzhong Zhu,2 Xinjun Miao,2 Honghan Gong1 1Department of Radiology, The First Affiliated Hospital of Nanchang University, Nangchang, Jiangxi, People’s Republic of China; 2Department of Radiology, Wenzhou Chinese Medicine Hospital, Wenzhou, Zhejiang, People’s Republic of China; 3Department of Medical Imaging, Jinling Hospital, Medical School of Nanjing University, Nanjing, Jiangsu, People’s Republic of China Objective: To explore the abnormal intrinsic functional hubs in alcohol dependence using voxelwise degree centrality analysis approach, and their relationships with clinical features.Materials and methods: Twenty-four male alcohol dependence subjects free of medicine (mean age, 50.21±9.62 years and 24 age- and education-matched male healthy controls (mean age, 50.29±8.92 years were recruited. The alcohol use disorders identification test and the severity of alcohol dependence questionnaire (SADQ were administered to assess the severity of alcohol craving. Voxelwise degree centrality approach was used to assess the abnormal intrinsic functional hubs features in alcohol dependence. Simple linear regression analysis was performed to investigate the relationships between the clinical features and abnormal intrinsic functional hubs.Results: Compared with healthy controls, alcohol dependence subjects exhibited significantly different degree centrality values in widespread left lateralization brain areas, including higher degree centrality values in the left precentral gyrus (BA 6, right hippocampus (BA 35, 36, and left orbitofrontal cortex (BA 11 and lower degree centrality values in the left cerebellum posterior lobe, bilateral secondary visual network (BA 18, and left precuneus (BA 7, 19. SADQ revealed a negative linear correlation with the degree centrality value in the left precentral gyrus (R2=0.296, P=0.006.Conclusion: The specific abnormal intrinsic functional hubs appear

  14. Spring Recipes A Problem-solution Approach

    CERN Document Server

    Long, Josh; Mak, Gary

    2010-01-01

    With over 3 Million users/developers, Spring Framework is the leading "out of the box" Java framework. Spring addresses and offers simple solutions for most aspects of your Java/Java EE application development, and guides you to use industry best practices to design and implement your applications. The release of Spring Framework 3 has ushered in many improvements and new features. Spring Recipes: A Problem-Solution Approach, Second Edition continues upon the bestselling success of the previous edition but focuses on the latest Spring 3 features for building enterprise Java applications.

  15. Real-Time Monitoring and Fault Diagnosis of a Low Power Hub Motor Using Feedforward Neural Network

    Directory of Open Access Journals (Sweden)

    Mehmet Şimşir

    2016-01-01

    Full Text Available Low power hub motors are widely used in electromechanical systems such as electrical bicycles and solar vehicles due to their robustness and compact structure. Such systems driven by hub motors (in wheel motors encounter previously defined and undefined faults under operation. It may inevitably lead to the interruption of the electromechanical system operation; hence, economic losses take place at certain times. Therefore, in order to maintain system operation sustainability, the motor should be precisely monitored and the faults are diagnosed considering various significant motor parameters. In this study, the artificial feedforward backpropagation neural network approach is proposed to real-time monitor and diagnose the faults of the hub motor by measuring seven main system parameters. So as to construct a necessary model, we trained the model, using a data set consisting of 4160 samples where each has 7 parameters, by the MATLAB environment until the best model is obtained. The results are encouraging and meaningful for the specific motor and the developed model may be applicable to other types of hub motors. The prosperous model of the whole system was embedded into Arduino Due microcontroller card and the mobile real-time monitoring and fault diagnosis system prototype for hub motor was designed and manufactured.

  16. Design and Analysis of a Novel Speed-Changing Wheel Hub with an Integrated Electric Motor for Electric Bicycles

    Directory of Open Access Journals (Sweden)

    Yi-Chang Wu

    2013-01-01

    Full Text Available The aim of this paper is to present an innovative electromechanical device which integrates a brushless DC (BLDC hub motor with a speed-changing wheel hub stored on the rear wheel of an electric bicycle. It combines a power source and a speed-changing mechanism to simultaneously provide functions of power generation and transmission for electric bicycles. As part of the proposed integrated device, the wheel hub consists of a basic planetary gear train providing three forward speeds including a low-speed gear, a direct drive, and a high-speed gear. Each gear is manually controlled by the shift control sleeve to selectively engage or disengage four pawl-and-ratchet clutches based on its clutching sequence table. The number of gear teeth of each gear element of the wheel hub is synthesized. The BLDC hub motor is an exterior-rotor-type permanent-magnet synchronous motor. Two-dimensional finite-element analysis (FEA software is employed to facilitate the motor design and performance analysis. An analysis of the power transmission path at each gear is provided to verify the validity of the proposed design. The results of this work are beneficial to the embodiment, design, and development of novel electromechanical devices for the power and transmission systems of electric bicycles.

  17. What is controlling the fragmentation process in the Infrared Dark Cloud G14.225-0.506? Differet level of fragmentation in twin hubs

    CERN Document Server

    Busquet, G; Palau, A; Liu, H B; Zhang, Q; Girart, J M; de Gregorio-Monsalvo, I; Pillai, T; Anglada, G; Ho, P T P

    2016-01-01

    We present observations of the 1.3 mm continuum emission toward hub-N and hub-S of the infrared dark cloud G14.225-0.506 carried out with the Submillimeter Array, together with observations of the dust emission at 870 and 350 microns obtained with APEX and CSO telescopes. The large scale dust emission of both hubs consists of a single peaked clump elongated in the direction of the associated filament. At small scales, the SMA images reveal that both hubs fragment into several dust condensations. The fragmentation level was assessed under the same conditions and we found that hub-N presents 4 fragments while hub-S is more fragmented, with 13 fragments identified. We studied the density structure by means of a simultaneous fit of the radial intensity profile at 870 and 350 microns and the spectral energy distribution adopting a Plummer-like function to describe the density structure. The parameters inferred from the model are remarkably similar in both hubs, suggesting that density structure could not be respon...

  18. A Coordinated Replenishment Policy between Two Suppliers Based on the Model of Using Supply-Hub%基于Supply-Hub运作模式的供应商协同补货策略研究

    Institute of Scientific and Technical Information of China (English)

    马士华; 黄焜; 何媛媛

    2011-01-01

    coordinated replenishment policy, designed to encourage information sharing among suppliers, needs to address the following activities: ( 1 ) Suppliers with longer lead times first decide on their replenishment quantities, and then uploads the replenishment information to the supply-hub; (2) Suppliers with shorter lead times choose their replenishment quantities based on the inventory information of other suppliers on the supply-hub platform; and (3) The supply- hub dispatches vehicles to collect components from those supplies in a predetermined quantity with “milk-runs.”A unique Nash equilibrium exists statically when information sharing among suppliers does not occur in the traditional replenishment model. The traditional model is reformulated after taking into consideration of information sharing and coordination among suppliers. An analysis is conducted based on the revised model and shows that suppliers with longer lead time always choose a fixed target replenishment level. Suppliers with shorter lead time will choose the target level depends on real time inventory position of another supplier. Our findings suggest that this coordinated replenishment policy is an effective method to manage inventory backorder problems. The holding and extra holding costs of components can be substantially reduced via the coordinated replenishment policy.

  19. Comparative spring mechanics in mantis shrimp.

    Science.gov (United States)

    Patek, S N; Rosario, M V; Taylor, J R A

    2013-04-01

    Elastic mechanisms are fundamental to fast and efficient movements. Mantis shrimp power their fast raptorial appendages using a conserved network of exoskeletal springs, linkages and latches. Their appendages are fantastically diverse, ranging from spears to hammers. We measured the spring mechanics of 12 mantis shrimp species from five different families exhibiting hammer-shaped, spear-shaped and undifferentiated appendages. Across species, spring force and work increase with size of the appendage and spring constant is not correlated with size. Species that hammer their prey exhibit significantly greater spring resilience compared with species that impale evasive prey ('spearers'); mixed statistical results show that species that hammer prey also produce greater work relative to size during spring loading compared with spearers. Disabling part of the spring mechanism, the 'saddle', significantly decreases spring force and work in three smasher species; cross-species analyses show a greater effect of cutting the saddle on the spring force and spring constant in species without hammers compared with species with hammers. Overall, the study shows a more potent spring mechanism in the faster and more powerful hammering species compared with spearing species while also highlighting the challenges of reconciling within-species and cross-species mechanical analyses when different processes may be acting at these two different levels of analysis. The observed mechanical variation in spring mechanics provides insights into the evolutionary history, morphological components and mechanical behavior, which were not discernible in prior single-species studies. The results also suggest that, even with a conserved spring mechanism, spring behavior, potency and component structures can be varied within a clade with implications for the behavioral functions of power-amplified devices.

  20. Reviewing the Justice and Security Hub Modality as Piloted in Liberia

    Directory of Open Access Journals (Sweden)

    Rory Keane

    2012-11-01

    Full Text Available ‘The Republic of Bangui’ or ‘the Republic of Monrovia’ are phrases we sometimes hear from practitioners to describe post conflict countries where very few services exist outside the capital city. This is especially the case for security – the critical public good in post conflict countries. In response to the need to bring security services closer to the citizens who often need them most, the Government of Liberia and the United Nations are piloting a new approach financed by the UN Peacebuilding Fund (PBF – the so-called ‘Justice and Security Hubs’. The donor community and the United Nations are watching closely. If this works, there is indication from UN officials that the model could potentially be replicated in other settings such as the East of the Democratic Republic of the Congo (DRC, Haiti and the northern states of South Sudan. If the hub concept is capable of being adapted and successful elsewhere, the United Nations will not only have added a new instrument to its peacekeeping toolkit but will also firmly demonstrate how the UN Peacebuilding Fund can in essence be catalytic in fostering long-term and comprehensive approaches to peacebuilding. This practice note outlines the process of developing and constructing the first hub in Liberia, which is due to be partly operational by the end of 2012, and provides a prognosis on its chances for success.

  1. Of Hubs and Hinterlands: Cyprus as an Insular Space of Overlapping Diasporas

    Directory of Open Access Journals (Sweden)

    Russell King

    2012-05-01

    Full Text Available This paper uses the metaphor of diasporic hubs and hinterlands to document and analyse the various diasporic formations that overlap and encounter each other on the divided island of Cyprus. After a review of the various ways that islands interface with migration processes and some essential historical and statistical background on Cyprus and its population, the paper considers a number of migrations/diasporas that are based on or affect the island. They include the emigration from the diasporic hub of Cyprus during the 1950s-1970s; return migration, both of the original emigrants and their descendants; the British military/colonial settlement of Cyprus; retirees and ‘lifestyle migrants’; and various categories of recent immigrants, for whom Cyprus is a diasporic hinterland. We draw both similarities and differences between migratory dynamics in the northern, Turkish Cypriot part of the island and the southern, Greek Cypriot part. In the final part of the paper we describe recent fieldwork on various spaces of inter-diasporic encounter in Cyprus.

  2. EXPANSION OF UNIVERSITY EDUCATION, GRADUATE UNEMPLOYMENT AND THE KNOWLEDGE HUB IN SRI LANKA

    Directory of Open Access Journals (Sweden)

    Gamini Samaranayake

    2016-04-01

    Full Text Available The main objective of this paper is to examine the nexus between the existing university education system and graduate unemployment, and to explore the responses of successive governments to address this issue. It also examines the viability and potential of the knowledge hub as a solution to graduate unemployment. Towards this end, it argues that the solution to graduate employment lies in implementing structural changes that are concurrent to changes that are taking place at the international level in higher education. It illustrates, with the use of relevant sources, the pressing issue of graduate un- and underemployment, and identifies the mismatch between skills and requirements as a major factor contributing to intensify the crisis. It observes that strategies such as training unemployed graduates to enable them to acquire the competencies needed for the modern work place, developing systems to link them to the world of work, re-structuring the university system such that it is more concerned with quality and relevance rather than the width of knowledge imparted, and introducing job-oriented programmes could partially address this issue. It also identifies the proposal to establish a knowledge hub in Sri Lanka as constituting a long term and sustainable strategy not only to mitigate the effects of graduate un- and underemployment, but also to facilitate a lucrative source of revenue for the country.

  3. Unveiling the Early-Stage Anatomy of a Protocluster Hub with ALMA

    CERN Document Server

    Henshaw, J D; Longmore, S N; Caselli, P; Pineda, J E; Avison, A; Barnes, A T; Tan, J C; Fontani, F

    2016-01-01

    High-mass stars shape the interstellar medium in galaxies, and yet, largely because the initial conditions are poorly constrained, we do not know how they form. One possibility is that high-mass stars and star clusters form at the junction of filamentary networks, referred to as "hubs". In this letter we present the complex anatomy of a protocluster hub within an Infrared Dark Cloud (IRDC), G035.39-00.33, believed to be in an early phase of its evolution. We use high-angular resolution ($\\{\\theta_{\\rm maj}, \\theta_{\\rm min}\\}=\\{1.''4, 0.''8\\}\\sim\\{0.02\\,{\\rm pc}, 0.01\\,{\\rm pc}\\}$) and high-sensitivity ($0.2$ mJy beam$^{-1}$; $\\sim0.2$ M$_{\\odot}$) 1.07 mm dust continuum observations from the Atacama Large Millimeter Array (ALMA) to identify a network of narrow, $0.028\\,\\pm\\,0.005$ pc wide, filamentary structures. These are a factor of $\\gtrsim3$ narrower than the proposed "quasi-universal" $\\sim0.1$ pc width of interstellar filaments. Additionally, 28 compact objects are reported, spanning a mass range $0.3\\...

  4. Clique of functional hubs orchestrates population bursts in developmentally regulated neural networks

    Science.gov (United States)

    Torcini, Alessandro; Luccioli, Stefano; Bonifazi, Paolo; Ben-Jacob, Eshel; Barzilai, Ari

    2015-03-01

    It has recently been discovered that single neuron stimulation can impact network dynamics in immature and adult neuronal circuits. Here we report a novel mechanism which can explain in developing neuronal circuits, typically composed of only excitatory cells, the peculiar role played by a few specific neurons in promoting/arresting the population activity. For this purpose, we consider a standard neuronal network model, with short-term synaptic plasticity, whose population activity is characterized by bursting behavior. The addition of developmentally regulated constraints on single neuron excitability and connectivity leads to the emergence of functional hub neurons, whose stimulation/deletion is critical for the network activity. Functional hubs form a clique, where a precise sequential activation of the neurons is essential to ignite collective events without any need for a specific topological architecture. Unsupervised time-lagged firings of supra-threshold cells, in connection with coordinated entrainments of near-threshold neurons, are the key ingredients to orchestrate population activity. This work is part of the activity of the Joint Italian-Israeli Laboratory on Integrative Network Neuroscience supported by the Italian Ministry of Foreign Affairs.

  5. Bottlenecks and hubs in inferred networks are important for virulence in Salmonella typhimurium.

    Science.gov (United States)

    McDermott, Jason E; Taylor, Ronald C; Yoon, Hyunjin; Heffron, Fred

    2009-02-01

    Recent advances in experimental methods have provided sufficient data to consider systems as large networks of interconnected components. High-throughput determination of protein-protein interaction networks has led to the observation that topological bottlenecks, proteins defined by high centrality in the network, are enriched in proteins with systems-level phenotypes such as essentiality. Global transcriptional profiling by microarray analysis has been used extensively to characterize systems, for example, examining cellular response to environmental conditions and effects of genetic mutations. These transcriptomic datasets have been used to infer regulatory and functional relationship networks based on co-regulation. We use the context likelihood of relatedness (CLR) method to infer networks from two datasets gathered from the pathogen Salmonella typhimurium: one under a range of environmental culture conditions and the other from deletions of 15 regulators found to be essential in virulence. Bottleneck and hub genes were identified from these inferred networks, and we show for the first time that these genes are significantly more likely to be essential for virulence than their non-bottleneck or non-hub counterparts. Networks generated using simple similarity metrics (correlation and mutual information) did not display this behavior. Overall, this study demonstrates that topology of networks inferred from global transcriptional profiles provides information about the systems-level roles of bottleneck genes. Analysis of the differences between the two CLR-derived networks suggests that the bottleneck nodes are either mediators of transitions between system states or sentinels that reflect the dynamics of these transitions.

  6. Clique of functional hubs orchestrates population bursts in developmentally regulated neural networks.

    Directory of Open Access Journals (Sweden)

    Stefano Luccioli

    2014-09-01

    Full Text Available It has recently been discovered that single neuron stimulation can impact network dynamics in immature and adult neuronal circuits. Here we report a novel mechanism which can explain in neuronal circuits, at an early stage of development, the peculiar role played by a few specific neurons in promoting/arresting the population activity. For this purpose, we consider a standard neuronal network model, with short-term synaptic plasticity, whose population activity is characterized by bursting behavior. The addition of developmentally inspired constraints and correlations in the distribution of the neuronal connectivities and excitabilities leads to the emergence of functional hub neurons, whose stimulation/deletion is critical for the network activity. Functional hubs form a clique, where a precise sequential activation of the neurons is essential to ignite collective events without any need for a specific topological architecture. Unsupervised time-lagged firings of supra-threshold cells, in connection with coordinated entrainments of near-threshold neurons, are the key ingredients to orchestrate population activity.

  7. Partial synchronization in networks of non-linearly coupled oscillators: The Deserter Hubs Model

    Energy Technology Data Exchange (ETDEWEB)

    Freitas, Celso, E-mail: cbnfreitas@gmail.com; Macau, Elbert, E-mail: elbert.macau@inpe.br [Associate Laboratory for Computing and Applied Mathematics - LAC, Brazilian National Institute for Space Research - INPE (Brazil); Pikovsky, Arkady, E-mail: pikovsky@uni-potsdam.de [Department of Physics and Astronomy, University of Potsdam, Germany and Department of Control Theory, Nizhni Novgorod State University, Gagarin Av. 23, 606950, Nizhni Novgorod (Russian Federation)

    2015-04-15

    We study the Deserter Hubs Model: a Kuramoto-like model of coupled identical phase oscillators on a network, where attractive and repulsive couplings are balanced dynamically due to nonlinearity of interactions. Under weak force, an oscillator tends to follow the phase of its neighbors, but if an oscillator is compelled to follow its peers by a sufficient large number of cohesive neighbors, then it actually starts to act in the opposite manner, i.e., in anti-phase with the majority. Analytic results yield that if the repulsion parameter is small enough in comparison with the degree of the maximum hub, then the full synchronization state is locally stable. Numerical experiments are performed to explore the model beyond this threshold, where the overall cohesion is lost. We report in detail partially synchronous dynamical regimes, like stationary phase-locking, multistability, periodic and chaotic states. Via statistical analysis of different network organizations like tree, scale-free, and random ones, we found a measure allowing one to predict relative abundance of partially synchronous stationary states in comparison to time-dependent ones.

  8. Current Status of Mammals and Reptiles at Hub Dam Area, Sindh / Balochistan, Pakistan

    Directory of Open Access Journals (Sweden)

    Abeda Begum

    2013-12-01

    Full Text Available During the present study in 2012, a total of twenty four mammalian species were recorded belonging to 5 orders and 10 families; out of these, 8 species are less common, 2 species are rare, while 14 species are common in Hub Dam area. Twenty five reptilian species belonging to 3 orders and 12 families were also recorded from the area. Three species of mammalian Urial (Ovis vignei, Chinkara/Indian Gazelle (Gazella bennettii and Jungle Cat (Felis chaus, one reptilian species Common Krait (Bungarus caeruleus were recorded as rare from the study area during 2012. During the present study, nine mammalian species Wild Goat/Sindh Ibex (Capra aegagrus, Urial (Ovis vignei, Chinkara/Indian Gazelle (Gazella bennettii, Indian Hedgehog (Paraechinus micropus, Cape Hare (Lepus capensis, Little Indian Field Mouse (Mus booduga, House Shrew (Sorex thibetanus, Balochistan Gerbil (Gerbillus nanus and Indian Gerbil (Tatera indica and two reptilian Warty Rock Gecko (Cyrtodactylus kachhensis kachhensis and Banded Dwarf Gecko (Tropiocolotes helenae were recorded from the area. As regards threats to mammals and reptiles, these are affected by disturbance. Efforts are being made to conserve the important mammals and reptiles particularly in the protected area especially at Hub Dam.

  9. Study on rigid-flexible coupling dynamics of hub-plate system

    Institute of Scientific and Technical Information of China (English)

    ZHAO Feiyun; XIE Yongcheng; ZHANG Ming; HE Yinbiao

    2007-01-01

    Dynamic modeling of a rotating flexible hubplate system is investigated by using Jourdain's variation principle in which the finite element method (FEM) is used as discretization method for a flexible plate. Different from the previous modeling of a plate with a prescribed large overall motion, the coupling between large overall motion of the system and elastic deformation of the flexible plate is taken into account in the proposed coupling model. The quadratic terms are included in the strain-displacement expression,such that the dynamic stiffening terms are included. Simulation of a rotating hub-plate system indicates that the linear model based on linear strain-displacement assumption may lead to erroneous results in the case of high rotation speed. Conservation of energy verifies the validity of the proposed model. Furthermore, frequency analysis of a hub-plate system shows the difference between the frequencies of the system with free and prescribed large overall motion, and parameter analysis of the system reveals the coupling characteristics of the rotational motion and the deformation.

  10. Aspects of transport transit hubs construction management in coordination with object lifecycle projecting

    Directory of Open Access Journals (Sweden)

    Danilina Nina

    2016-01-01

    Full Text Available The article involves the results of the research in the field of the initial phase in the project of the object lifecycle for urban public transportation transit hubs (TTH. The main purpose is to provide definition and justification of area parameters for spatial solution of a hub with consideration of its construction viability and sustainability of urban development. In the article there are presented the results of analytical studies of the data available in the approved Planning documentation for TTH objects listed in the short-term program of TTH construction in Moscow. The point of interest was to obtain correlations between the total area of TTH area, areas of commercial and technological use and passenger traffic value in order to define territory balance providing request from city authorities and private investors for construction project management. Also, there is presented the theoretical model as an evaluation guide that allows evaluating not only the demand of a city and its population in the development of TTH territory but also and especially the requirements for placing commercial areas inside TTH.

  11. A hub-and-spoke circuit drives pheromone attraction and social behaviour in C. elegans.

    Science.gov (United States)

    Macosko, Evan Z; Pokala, Navin; Feinberg, Evan H; Chalasani, Sreekanth H; Butcher, Rebecca A; Clardy, Jon; Bargmann, Cornelia I

    2009-04-30

    Innate social behaviours emerge from neuronal circuits that interpret sensory information on the basis of an individual's own genotype, sex and experience. The regulated aggregation behaviour of the nematode Caenorhabditis elegans, a simple animal with only 302 neurons, is an attractive system to analyse these circuits. Wild social strains of C. elegans aggregate in the presence of specific sensory cues, but solitary strains do not. Here we identify the RMG inter/motor neuron as the hub of a regulated circuit that controls aggregation and related behaviours. RMG is the central site of action of the neuropeptide receptor gene npr-1, which distinguishes solitary strains (high npr-1 activity) from wild social strains (low npr-1 activity); high RMG activity is essential for all aspects of social behaviour. Anatomical gap junctions connect RMG to several classes of sensory neurons known to promote aggregation, and to ASK sensory neurons, which are implicated in male attraction to hermaphrodite pheromones. We find that ASK neurons respond directly to pheromones, and that high RMG activity enhances ASK responses in social strains, causing hermaphrodite attraction to pheromones at concentrations that repel solitary hermaphrodites. The coordination of social behaviours by RMG suggests an anatomical hub-and-spoke model for sensory integration in aggregation, and points to functions for related circuit motifs in the C. elegans wiring diagram.

  12. Characteristics and concepts of dynamic hub proteins in DNA processing machinery from studies of RPA.

    Science.gov (United States)

    Sugitani, Norie; Chazin, Walter J

    2015-03-01

    DNA replication, damage response and repair require the coordinated action of multi-domain proteins operating within dynamic multi-protein machines that act upon the DNA substrate. These modular proteins contain flexible linkers of various lengths, which enable changes in the spatial distribution of the globular domains (architecture) that harbor their essential biochemical functions. This mobile architecture is uniquely suited to follow the evolving substrate landscape present over the course of the specific process performed by the multi-protein machinery. A fundamental advance in understanding of protein machinery is the realization of the pervasive role of dynamics. Not only is the machine undergoing dynamic transformations, but the proteins themselves are flexible and constantly adapting to the progression through the steps of the overall process. Within this dynamic context the activity of the constituent proteins must be coordinated, a role typically played by hub proteins. A number of important characteristics of modular proteins and concepts about the operation of dynamic machinery have been discerned. These provide the underlying basis for the action of the machinery that reads DNA, and responds to and repairs DNA damage. Here, we introduce a number of key characteristics and concepts, including the modularity of the proteins, linkage of weak binding sites, direct competition between sites, and allostery, using the well recognized hub protein replication protein A (RPA).

  13. CACTUS SPRING ROADLESS AREA, CALIFORNIA.

    Science.gov (United States)

    Matti, Jonathan C.; Kuizon, Lucia

    1984-01-01

    Geologic, geochemical, and geophysical studies together with a review of historic mining and prospecting activities indicate that the Cactus Spring Roadless Area in California has little promise for the occurrence of mineral or energy resources. Marble bodies occur in the northern part of the roadless area and are possible resources for building stone, crushed and quarried aggregate, and lime and magnesium for Portland cement and industrial applications. It is recommended that the terrane of marble be mapped and sampled carefully in order to evaluate the quantity and quality of the carbonate resources.

  14. Topology and Non-Deterministic Polynomial Time Computation : Avoidance of The Misbehaviour of Hub-Free Diagrams and Consequences

    Directory of Open Access Journals (Sweden)

    Anthony Gasperin

    2013-09-01

    Full Text Available To study groups with small Dehn's function, Olshanskii and Sapir developed a new invariant of bipartite chords diagrams and applied it to hub-free realization of S-machines. In this paper we consider this new invariant together with groups constructed from S-machines containing the hub relation. The idea is to study the links between the topology of the asymptotic cones and polynomial time computations. Indeed it is known that the topology of such metric space depends on diagrams without hubs that do not correspond to the computations of the considered S-machine. This work gives sufficient conditions that avoid this misbehaviour, but as we shall see the method has a significant drawback.

  15. Application of Palpebral Spring in Asian Patients With Paralytic Lagophthalmos.

    Science.gov (United States)

    Chan, Richie Chiu-Lung; Chan, Jimmy Yu-Wai

    Literature on palpebral springs is scarce, and even more so for the Asian population. In this study, the authors evaluated their experience with palpebral spring placement for paralytic lagophthalmos in an Asian population. The authors report the unique challenges encountered due to the distinctive features in Asian eyelids and how they overcome them. To the best of our knowledge, this is the first report on the application of palpebral springs in Asians. All patients treated for paralytic lagophthalmos in the Department of Surgery, Queen Mary Hospital, from November 2013 to December 2015, were included in this study. The authors retrieved and analyzed the demographic data, preoperative assessment details, and treatment outcomes. A total of 17 patients were recruited. The median interval between facial palsy occurrence and surgery was 66 months. Preoperatively, vertical palpebral fissure was 12.3 ± 1.7 mm with margin reflex distance 1 of 3.7 ± 0.3 mm and margin reflex distance 2 of 8.6 ± 1.6 mm. Lagophthalmos before surgery was 9.6 ± 2.3 mm. After the palpebral spring surgeries, vertical palpebral fissure was reduced to 9.1 ± 1.4 mm. margin reflex distance 1 is slightly reduced (3.3 ± 0.8 mm) and margin reflex distance 2 improved to 5.8 ± 1.0 mm. Lagophthalmos reduced significantly to 0.8 ± 1.3 mm. Seven patients required revision procedures. Palpebral spring is a safe and effective treatment for Asian patients with paralytic lagophthalmos. However, surgeons should be aware of the unique challenges associated with the anatomy of Asian eyelids. Special adaptation of the procedure is required to optimize the outcome.

  16. WHAT IS CONTROLLING THE FRAGMENTATION IN THE INFRARED DARK CLOUD G14.225–0.506?: DIFFERENT LEVELS OF FRAGMENTATION IN TWIN HUBS

    Energy Technology Data Exchange (ETDEWEB)

    Busquet, Gemma; Girart, Josep Miquel [Institut de Ciències de l’Espai (CSIC-IEEC), Campus UAB, Carrer de Can Magrans, S/N, E-08193, Cerdanyola del Vallès, Catalunya (Spain); Estalella, Robert [Departament d’Astronomia i Meteorologia, Institut de Ciències del Cosmos (ICC), Universitat de Barcelona (IEEC-UB), Martí i Franquès, 1, E-08028 Barcelona, Catalunya (Spain); Palau, Aina [Instituto de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, P.O. Box 3-72, 58090 Morelia, Michoacán, México (Mexico); Liu, Hauyu Baobab; Ho, Paul T. P. [Academia Sinica Institute of Astronomy and Astrophysics, Taipei, Taiwan (China); Zhang, Qizhou [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); De Gregorio-Monsalvo, Itziar [European Southern Observatory (ESO), Karl-Schwarzschild-Str. 2, D-85748 Garching (Germany); Pillai, Thushara [Max Planck Institut für Radioastronomie, Auf dem Hügel 69, D-53121 Bonn (Germany); Anglada, Guillem, E-mail: busquet@ice.cat [Instituto de Astrofísica de Andalucía, CSIC, Glorieta de la Astronomía, s/n, E-18008, Granada (Spain)

    2016-03-20

    We present observations of the 1.3 mm continuum emission toward hub-N and hub-S of the infrared dark cloud G14.225–0.506 carried out with the Submillimeter Array, together with observations of the dust emission at 870 and 350 μm obtained with APEX and CSO telescopes. The large-scale dust emission of both hubs consists of a single peaked clump elongated in the direction of the associated filament. At small scales, the SMA images reveal that both hubs fragment into several dust condensations. The fragmentation level was assessed under the same conditions and we found that hub-N presents 4 fragments while hub-S is more fragmented, with 13 fragments identified. We studied the density structure by means of a simultaneous fit of the radial intensity profile at 870 and 350 μm and the spectral energy distribution adopting a Plummer-like function to describe the density structure. The parameters inferred from the model are remarkably similar in both hubs, suggesting that density structure could not be responsible for determining the fragmentation level. We estimated several physical parameters, such as the level of turbulence and the magnetic field strength, and we found no significant differences between these hubs. The Jeans analysis indicates that the observed fragmentation is more consistent with thermal Jeans fragmentation compared with a scenario in which turbulent support is included. The lower fragmentation level observed in hub-N could be explained in terms of stronger UV radiation effects from a nearby H ii region, evolutionary effects, and/or stronger magnetic fields at small scales, a scenario that should be further investigated.

  17. Design of Ceramic Springs for Use in Semiconductor Crystal Growth in Microgravity

    Science.gov (United States)

    Kaforey, M. F.; Deeb, C. W.; Matthiesen, D. H.

    1999-01-01

    Segregation studies can be done in microgravity to reduce buoyancy driven convection and investigate diffusion-controlled growth during the growth of semiconductor crystals. During these experiments, it is necessary to prevent free surface formation in order to avoid surface tension driven convection (Marangoni convection). Semiconductor materials such as gallium arsenide and germanium shrink upon melting, so a spring is necessary to reduce the volume of the growth chamber and prevent the formation of a free surface when the sample melts. A spring used in this application must be able to withstand both the high temperature and the processing atmosphere. During the growth of gallium arsenide crystals during the GTE Labs/USAF/NASA GaAs GAS Program and during the CWRU GaAs programs aboard the First and Second United States microgravity Laboratories, springs made of pyrolytic boron nitride (PBN) leaves were used. The mechanical properties of these PBN springs have been investigated and springs having spring constants ranging from 0.25 N/mm to 25 N/mm were measured. With this improved understanding comes the ability to design springs for more general applications, and guidelines are given for optimizing the design of PBN springs for crystal growth applications.

  18. Slightly thermal springs and non-thermal springs at Mount Shasta, California: Chemistry and recharge elevations

    Science.gov (United States)

    Nathenson, M.; Thompson, J.M.; White, L.D.

    2003-01-01

    Temperature measurements, isotopic contents, and dissolved constituents are presented for springs at Mount Shasta to understand slightly thermal springs in the Shasta Valley based on the characteristics of non-thermal springs. Non-thermal springs on Mount Shasta are generally cooler than mean annual air temperatures for their elevation. The specific conductance of non-thermal springs increases linearly with discharge temperature. Springs at higher and intermediate elevations on Mount Shasta have fairly limited circulation paths, whereas low-elevation springs have longer paths because of their higher-elevation recharge. Springs in the Shasta Valley are warmer than air temperatures for their elevation and contain significant amounts of chloride and sulfate, constituents often associated with volcanic hydrothermal systems. Data for the Shasta Valley springs generally define mixing trends for dissolved constituents and temperature. The isotopic composition of the Shasta Valley springs indicates that water fell as precipitation at a higher elevation than any of the non-thermal springs. It is possible that the Shasta Valley springs include a component of the outflow from a proposed 210??C hydrothermal system that boils to supply steam for the summit acid-sulfate spring. In order to categorize springs such as those in the Shasta Valley, we introduce the term slightly thermal springs for springs that do not meet the numerical criterion of 10??C above air temperature for thermal springs but have temperatures greater than non-thermal springs in the area and usually also have dissolved constituents normally found in thermal waters. ?? 2002 Elsevier Science B.V. All rights reserved.

  19. Formulating the spring discharge-function for the recession period by analyzing its recession curve: A case study of the Ranichauri spring (India)

    Indian Academy of Sciences (India)

    A K Vashisht; B Bam

    2013-10-01

    The Greater Himalayan region is witnessing a changing rainfall pattern from the last few decades. Low-intensity longer-duration rainfall events have now been replaced with intense and shorter-duration events that are further responsible for the reduced recharging of the spring catchments. Consequently, the natural springs are either drying up or becoming seasonal. Prediction of spring water availability during the recession period is the key to its proper management. The spring discharge-rate can be forecasted by studying its behaviour for the past recession periods. Expressing recession curve in mathematical terms requires its quantitative analyses in priori. It was found that the fitting of recession-curve (of the Ranichauri spring under study) with two exponential components gives accurate results. The maximum value of exponential coefficient (i.e., 0.0206) represents the major contribution to drainage from the spring-catchment’s portion with highest permeability, whereas the minimum value (i.e., 0.0016) represents the major contribution to spring discharge from the portion with lowest permeability. Analyses show that the permeability of the porous medium is responsible for discharge rate and its capacity is responsible for perennial or seasonal behaviour of the spring. Using the mean values of the recession parameters, the master discharge-function of the spring for the recession period is formulated for calculating its discharge-rate during the recession period of any year. Apart from the year 2001, its predictions are in close agreement with the actually monitored data. The efficiency of the formulated master discharge function of the spring for the recession period has been evaluated equal to 0.965 using the Nash–Sutcliffe efficiency criterion.

  20. 旅游枢纽理论与实践研究综述%A systematic literature review of tourism hub theory and practice

    Institute of Scientific and Technical Information of China (English)

    邹统钎; 江璐虹; 郭晓霞

    2016-01-01

    Research on tourism hubs in China and abroad are based on transportation hubs,after which the basic theory about tourism hubs occurred and boosted study on the theoretical and practical development of tourism hubs.Tourism hubs originated from transportation hubs.Based on transportation hubs,tourism hubs provide tourists with tourism-related information,service and infrastructure,as well as well-rounded,seamless and accessible integration of all kind of transports which make tourist transfers and travel more convenient.Tourism hubs bridge tourism markets and destinations,but there are differences between them.The tourism resources are main attractions for tourists while tourism hubs strike to control the local tourism industry through tourist flows.The functions of gathering and scattering are key factors for tourism hubs which help to control tourist flows and the tourism industry.According to different practical functions and various development processes of international tourism hubs,we generalize their practices and divide them into two categories:hub-dominated tourism cities and hub-destination tourism cities.The development of international tourism hubs follows similar laws.Well-constructed hubs,especially the airport hub network will be helpful for tourism hubs to attract tourist flow.Tourism hubs benefit from their hub functions and control of local tourism industries.With the development of the tourism industry,tourist destinations and tourism hubs tend to mix together.%旅游枢纽的国内外研究经历了“交通枢纽-旅游枢纽基础理论-旅游枢纽”的阶段演变.旅游枢纽的发展源于交通枢纽,以交通枢纽为基础,以人的运输为主,提供旅游配套的信息服务,并整合了一般公共交通等多种交通方式,为游客提供便捷服务.旅游枢纽是旅游客源地与目的地之间的中介与桥梁,旅游目的地主要通过拥有的旅游资源形成吸引物,旅游枢纽则通过流经

  1. Innovative Technological Approach to Ebola Virus Disease Outbreak Response in Nigeria Using the Open Data Kit and Form Hub Technology.

    Science.gov (United States)

    Tom-Aba, Daniel; Olaleye, Adeniyi; Olayinka, Adebola Tolulope; Nguku, Patrick; Waziri, Ndadilnasiya; Adewuyi, Peter; Adeoye, Olawunmi; Oladele, Saliu; Adeseye, Aderonke; Oguntimehin, Olukayode; Shuaib, Faisal

    2015-01-01

    The recent outbreak of Ebola Virus Disease (EVD) in West Africa has ravaged many lives. Effective containment of this outbreak relies on prompt and effective coordination and communication across various interventions; early detection and response being critical to successful control. The use of information and communications technology (ICT) in active surveillance has proved to be effective but its use in Ebola outbreak response has been limited. Due to the need for timeliness in reporting and communication for early discovery of new EVD cases and promptness in response; it became imperative to empower the response team members with technologies and solutions which would enable smooth and rapid data flow. The Open Data Kit and Form Hub technology were used in combination with the Dashboard technology and ArcGIS mapping for follow up of contacts, identification of cases, case investigation and management and also for strategic planning during the response. A remarkable improvement was recorded in the reporting of daily follow-up of contacts after the deployment of the integrated real time technology. The turnaround time between identification of symptomatic contacts and evacuation to the isolation facility and also for receipt of laboratory results was reduced and informed decisions could be taken by all concerned. Accountability in contact tracing was ensured by the use of a GPS enabled device. The use of innovative technologies in the response of the EVD outbreak in Nigeria contributed significantly to the prompt control of the outbreak and containment of the disease by providing a valuable platform for early warning and guiding early actions.

  2. Innovative Technological Approach to Ebola Virus Disease Outbreak Response in Nigeria Using the Open Data Kit and Form Hub Technology.

    Directory of Open Access Journals (Sweden)

    Daniel Tom-Aba

    Full Text Available The recent outbreak of Ebola Virus Disease (EVD in West Africa has ravaged many lives. Effective containment of this outbreak relies on prompt and effective coordination and communication across various interventions; early detection and response being critical to successful control. The use of information and communications technology (ICT in active surveillance has proved to be effective but its use in Ebola outbreak response has been limited. Due to the need for timeliness in reporting and communication for early discovery of new EVD cases and promptness in response; it became imperative to empower the response team members with technologies and solutions which would enable smooth and rapid data flow. The Open Data Kit and Form Hub technology were used in combination with the Dashboard technology and ArcGIS mapping for follow up of contacts, identification of cases, case investigation and management and also for strategic planning during the response. A remarkable improvement was recorded in the reporting of daily follow-up of contacts after the deployment of the integrated real time technology. The turnaround time between identification of symptomatic contacts and evacuation to the isolation facility and also for receipt of laboratory results was reduced and informed decisions could be taken by all concerned. Accountability in contact tracing was ensured by the use of a GPS enabled device. The use of innovative technologies in the response of the EVD outbreak in Nigeria contributed significantly to the prompt control of the outbreak and containment of the disease by providing a valuable platform for early warning and guiding early actions.

  3. The role of the Hes1 crosstalk hub in Notch-Wnt interactions of the intestinal crypt.

    Science.gov (United States)

    Kay, Sophie K; Harrington, Heather A; Shepherd, Sarah; Brennan, Keith; Dale, Trevor; Osborne, James M; Gavaghan, David J; Byrne, Helen M

    2017-02-28

    The Notch pathway plays a vital role in determining whether cells in the intestinal epithelium adopt a secretory or an absorptive phenotype. Cell fate specification is coordinated via Notch's interaction with the canonical Wnt pathway. Here, we propose a new mathematical model of the Notch and Wnt pathways, in which the Hes1 promoter acts as a hub for pathway crosstalk. Computational simulations of the model can assist in understanding how healthy intestinal tissue is maintained, and predict the likely consequences of biochemical knockouts upon cell fate selection processes. Chemical reaction network theory (CRNT) is a powerful, generalised framework which assesses the capacity of our model for monostability or multistability, by analysing properties of the underlying network structure without recourse to specific parameter values or functional forms for reaction rates. CRNT highlights the role of β-catenin in stabilising the Notch pathway and damping oscillations, demonstrating that Wnt-mediated actions on the Hes1 promoter can induce dynamic transitions in the Notch system, from multistability to monostability. Time-dependent model simulations of cell pairs reveal the stabilising influence of Wnt upon the Notch pathway, in which β-catenin- and Dsh-mediated action on the Hes1 promoter are key in shaping the subcellular dynamics. Where Notch-mediated transcription of Hes1 dominates, there is Notch oscillation and maintenance of fate flexibility; Wnt-mediated transcription of Hes1 favours bistability akin to cell fate selection. Cells could therefore regulate the proportion of Wnt- and Notch-mediated control of the Hes1 promoter to coordinate the timing of cell fate selection as they migrate through the intestinal epithelium and are subject to reduced Wnt stimuli. Furthermore, mutant cells characterised by hyperstimulation of the Wnt pathway may, through coupling with Notch, invert cell fate in neighbouring healthy cells, enabling an aberrant cell to maintain its

  4. Comparative Genomic Analysis Reveals Habitat-Specific Genes and Regulatory Hubs within the Genus Novosphingobium

    Science.gov (United States)

    Kumar, Roshan; Verma, Helianthous; Haider, Shazia; Bajaj, Abhay; Sood, Utkarsh; Ponnusamy, Kalaiarasan; Nagar, Shekhar; Shakarad, Mallikarjun N.; Negi, Ram Krishan; Singh, Yogendra; Khurana, J. P.; Gilbert, Jack A.

    2017-01-01

    ABSTRACT Species belonging to the genus Novosphingobium are found in many different habitats and have been identified as metabolically versatile. Through comparative genomic analysis, we identified habitat-specific genes and regulatory hubs that could determine habitat selection for Novosphingobium spp. Genomes from 27 Novosphingobium strains isolated from diverse habitats such as rhizosphere soil, plant surfaces, heavily contaminated soils, and marine and freshwater environments were analyzed. Genome size and coding potential were widely variable, differing significantly between habitats. Phylogenetic relationships between strains were less likely to describe functional genotype similarity than the habitat from which they were isolated. In this study, strains (19 out of 27) with a recorded habitat of isolation, and at least 3 representative strains per habitat, comprised four ecological groups—rhizosphere, contaminated soil, marine, and freshwater. Sulfur acquisition and metabolism were the only core genomic traits to differ significantly in proportion between these ecological groups; for example, alkane sulfonate (ssuABCD) assimilation was found exclusively in all of the rhizospheric isolates. When we examined osmolytic regulation in Novosphingobium spp. through ectoine biosynthesis, which was assumed to be marine habitat specific, we found that it was also present in isolates from contaminated soil, suggesting its relevance beyond the marine system. Novosphingobium strains were also found to harbor a wide variety of mono- and dioxygenases, responsible for the metabolism of several aromatic compounds, suggesting their potential to act as degraders of a variety of xenobiotic compounds. Protein-protein interaction analysis revealed β-barrel outer membrane proteins as habitat-specific hubs in each of the four habitats—freshwater (Saro_1868), marine water (PP1Y_AT17644), rhizosphere (PMI02_00367), and soil (V474_17210). These outer membrane proteins could play a

  5. Comparative Genomic Analysis Reveals Habitat-Specific Genes and Regulatory Hubs within the Genus Novosphingobium.

    Science.gov (United States)

    Kumar, Roshan; Verma, Helianthous; Haider, Shazia; Bajaj, Abhay; Sood, Utkarsh; Ponnusamy, Kalaiarasan; Nagar, Shekhar; Shakarad, Mallikarjun N; Negi, Ram Krishan; Singh, Yogendra; Khurana, J P; Gilbert, Jack A; Lal, Rup

    2017-01-01

    Species belonging to the genus Novosphingobium are found in many different habitats and have been identified as metabolically versatile. Through comparative genomic analysis, we identified habitat-specific genes and regulatory hubs that could determine habitat selection for Novosphingobium spp. Genomes from 27 Novosphingobium strains isolated from diverse habitats such as rhizosphere soil, plant surfaces, heavily contaminated soils, and marine and freshwater environments were analyzed. Genome size and coding potential were widely variable, differing significantly between habitats. Phylogenetic relationships between strains were less likely to describe functional genotype similarity than the habitat from which they were isolated. In this study, strains (19 out of 27) with a recorded habitat of isolation, and at least 3 representative strains per habitat, comprised four ecological groups-rhizosphere, contaminated soil, marine, and freshwater. Sulfur acquisition and metabolism were the only core genomic traits to differ significantly in proportion between these ecological groups; for example, alkane sulfonate (ssuABCD) assimilation was found exclusively in all of the rhizospheric isolates. When we examined osmolytic regulation in Novosphingobium spp. through ectoine biosynthesis, which was assumed to be marine habitat specific, we found that it was also present in isolates from contaminated soil, suggesting its relevance beyond the marine system. Novosphingobium strains were also found to harbor a wide variety of mono- and dioxygenases, responsible for the metabolism of several aromatic compounds, suggesting their potential to act as degraders of a variety of xenobiotic compounds. Protein-protein interaction analysis revealed β-barrel outer membrane proteins as habitat-specific hubs in each of the four habitats-freshwater (Saro_1868), marine water (PP1Y_AT17644), rhizosphere (PMI02_00367), and soil (V474_17210). These outer membrane proteins could play a key role in

  6. A Futile Search for Values and Pedagogy? A Discursive Analysis of the Marketing Messages of Branch-Campuses in Higher Education Hubs

    Science.gov (United States)

    Karram, Grace

    2014-01-01

    Higher education has become a key strategy for the economic development of certain city-states that are positioning themselves as higher education hubs, recruiting both students and foreign providers. This article presents the findings of a research study that examined the online messages of foreign branch-campuses in education hubs (Dubai, Hong…

  7. Global trade & the Dutch hub: understanding variegated forms of embeddedness of international trade in the Netherlands: clothing, flowers, and high-tech products

    NARCIS (Netherlands)

    Levelt, M.

    2010-01-01

    As global trade increases, some regions have become specialized in international trade and logistics, forming hubs to larger market areas. Although a lot is known about international trade in quantitative terms, much less is known about actual trade activities taking place in trade hubs and the ways

  8. Global trade & the Dutch hub: understanding variegated forms of embeddedness of international trade in the Netherlands: clothing, flowers, and high-tech products

    NARCIS (Netherlands)

    Levelt, M.

    2010-01-01

    As global trade increases, some regions have become specialized in international trade and logistics, forming hubs to larger market areas. Although a lot is known about international trade in quantitative terms, much less is known about actual trade activities taking place in trade hubs and the ways

  9. Participant Adherence Indicators Predict Changes in Blood Pressure, Anthropometric Measures, and Self-Reported Physical Activity in a Lifestyle Intervention: HUB City Steps

    Science.gov (United States)

    Thomson, Jessica L.; Landry, Alicia S.; Zoellner, Jamie M.; Connell, Carol; Madson, Michael B.; Molaison, Elaine Fontenot; Yadrick, Kathy

    2015-01-01

    The objective of this secondary analysis was to evaluate the utility of several participant adherence indicators for predicting changes in clinical, anthropometric, dietary, fitness, and physical activity (PA) outcomes in a lifestyle intervention, HUB City Steps, conducted in a southern, African American cohort in 2010. HUB City Steps was a…

  10. Running springs: speed and animal size.

    Science.gov (United States)

    Farley, C T; Glasheen, J; McMahon, T A

    1993-12-01

    Trotting and hopping animals use muscles, tendons and ligaments to store and return elastic energy as they bounce along the ground. We examine how the musculoskeletal spring system operates at different speeds and in animals of different sizes. We model trotting and hopping as a simple spring-mass system which consists of a leg spring and a mass. We find that the stiffness of the leg spring (k(leg)) is nearly independent of speed in dogs, goats, horses and red kangaroos. As these animals trot or hop faster, the leg spring sweeps a greater angle during the stance phase, and the vertical excursion of the center of mass during the ground contact phase decreases. The combination of these changes to the spring system causes animals to bounce off the ground more quickly at higher speeds. Analysis of a wide size range of animals (0.1-140 kg) at equivalent speeds reveals that larger animals have stiffer leg springs (k(leg) [symbol: see text] M0.67, where M is body mass), but that the angle swept by the leg spring is nearly independent of body mass. As a result, the resonant period of vertical vibration of the spring-mass system is longer in larger animals. The length of time that the feet are in contact with the ground increases with body mass in nearly the same way as the resonant period of vertical vibration.

  11. Work Term Assignment Spring 2017

    Science.gov (United States)

    Sico, Mallory

    2017-01-01

    My tour in the Engineering Robotics directorate exceeded my expectations. I learned lessons about Creo, manufacturing and assembly, collaboration, and troubleshooting. During my first tour, last spring, I used Creo on a smaller project, but had limited experience with it before starting in the Dynamic Systems Test branch this spring. I gained valuable experience learning assembly design, sheet metal design and designing with intent for manufacturing and assembly. These skills came from working both on the hatch and the floor. I also learned to understand the intent of other designers on models I worked with. While redesigning the floor, I was modifying an existing part and worked to understand what the previous designer had done to make it fit with the new model. Through working with the machine shop and in the mock-up, I learned much more about manufacturing and assembly. I used a Dremel, rivet gun, belt sander, and countersink for the first time. Through taking multiple safety training for different machine shops, I learned new machine shop safety skills specific to each one. This semester also gave me new collaborative opportunities. I collaborated with engineers within my branch as well as with Human Factors and the building 10 machine shop. This experience helped me learn how to design for functionality and assembly, not only for what would be easiest in my designs. In addition to these experiences, I learned many lessons in troubleshooting. I was the first person in my office to use a Windows 10 computer. This caused unexpected issues with NASA services and programs, such as the Digital Data Management Server (DDMS). Because of this, I gained experience finding solutions to lockout and freeze issues as well as Creo specific settings. These will be useful skills to have in the future and will be implemented in future rotations. This co-op tour has motivated me more to finish my degree and pursue my academic goals. I intend to take a machining Career Gateway

  12. Creating a global rare disease patient registry linked to a rare diseases biorepository database: Rare Disease-HUB (RD-HUB).

    Science.gov (United States)

    Rubinstein, Yaffa R; Groft, Stephen C; Bartek, Ronald; Brown, Kyle; Christensen, Ronald A; Collier, Elaine; Farber, Amy; Farmer, Jennifer; Ferguson, John H; Forrest, Christopher B; Lockhart, Nicole C; McCurdy, Kate R; Moore, Helen; Pollen, Geraldine B; Richesson, Rachel; Miller, Vanessa Rangel; Hull, Sara; Vaught, Jim

    2010-09-01

    A movement to create a global patient registry for as many as 7,000 rare diseases was launched at a workshop, "Advancing Rare Disease Research: The Intersection of Patient Registries, Biospecimen Repositories, and Clinical Data." http://rarediseases.info.nih.gov/PATIENT_REGISTRIES_WORKSHOP/. The workshop was sponsored by the Office of Rare Diseases Research (ORDR). The focus was the building of an infrastructure for an internet-based global registry linking to biorepositories. Such a registry would serve the patients, investigators, and drug companies. To aid researchers the participants suggested the creation of a centralized database of biorepositories for rare biospecimens (RD-HUB)http://biospecimens.ordr.info.nih.gov/ that could be linked to the registry. Over two days of presentations and breakout sessions, several hundred attendees discussed government rules and regulations concerning privacy and patients' rights and the nature and scope of data to be entered into a central registry as well as concerns about how to validate patient and clinician-entered data to ensure data accuracy. Mechanisms for aggregating data from existing registries were also discussed. The attendees identified registry best practices, model coding systems, international systems for recruiting patients into clinical trials and novel ways of using the internet directly to invite participation in research. They also speculated about who would bear ultimate responsibility for the informatics in the registry and who would have access to the information. Hurdles associated with biospecimen collection and how to overcome them were detailed. The development of the recommendations was, in itself, an indication of the commitment of the rare disease community as never before.

  13. A New Dynamic Model for a Flexible Hub-Beam System

    Institute of Scientific and Technical Information of China (English)

    LIU Zhu-yong; HONG Jia-zhen; CAI Guo-ping

    2009-01-01

    In this paper, a new dynamic model for the flexible hub-beam system is proposed by using the principle of continuum medium mechanics and the finite element discretization method. In the proposed model, the coupling deformation of any element of the beam is only related with the nodal coordinates of this element. So this model is suitable to the rotating beam in an arbitrary shape. Numerical examples of slender beams in straight and irregular shapes are carried out to demonstrate the validation of the proposed model. Simulation results indicate that the proposed model can be used valid for dynamic description of flexible rotating beam in irregular shape, and for both low and high rotation speeds.

  14. The UK National Quantum Technologies Hub in sensors and metrology (Keynote Paper)

    Science.gov (United States)

    Bongs, K.; Boyer, V.; Cruise, M. A.; Freise, A.; Holynski, M.; Hughes, J.; Kaushik, A.; Lien, Y.-H.; Niggebaum, A.; Perea-Ortiz, M.; Petrov, P.; Plant, S.; Singh, Y.; Stabrawa, A.; Paul, D. J.; Sorel, M.; Cumming, D. R. S.; Marsh, J. H.; Bowtell, R. W.; Bason, M. G.; Beardsley, R. P.; Campion, R. P.; Brookes, M. J.; Fernholz, T.; Fromhold, T. M.; Hackermuller, L.; Krüger, P.; Li, X.; Maclean, J. O.; Mellor, C. J.; Novikov, S. V.; Orucevic, F.; Rushforth, A. W.; Welch, N.; Benson, T. M.; Wildman, R. D.; Freegarde, T.; Himsworth, M.; Ruostekoski, J.; Smith, P.; Tropper, A.; Griffin, P. F.; Arnold, A. S.; Riis, E.; Hastie, J. E.; Paboeuf, D.; Parrotta, D. C.; Garraway, B. M.; Pasquazi, A.; Peccianti, M.; Hensinger, W.; Potter, E.; Nizamani, A. H.; Bostock, H.; Rodriguez Blanco, A.; Sinuco-Leon, G.; Hill, I. R.; Williams, R. A.; Gill, P.; Hempler, N.; Malcolm, G. P. A.; Cross, T.; Kock, B. O.; Maddox, S.; John, P.

    2016-04-01

    The UK National Quantum Technology Hub in Sensors and Metrology is one of four flagship initiatives in the UK National of Quantum Technology Program. As part of a 20-year vision it translates laboratory demonstrations to deployable practical devices, with game-changing miniaturized components and prototypes that transform the state-of-the-art for quantum sensors and metrology. It brings together experts from the Universities of Birmingham, Glasgow, Nottingham, Southampton, Strathclyde and Sussex, NPL and currently links to over 15 leading international academic institutions and over 70 companies to build the supply chains and routes to market needed to bring 10-1000x improvements in sensing applications. It seeks, and is open to, additional partners for new application development and creates a point of easy open access to the facilities and supply chains that it stimulates or nurtures.

  15. Plasma membrane domains enriched in cortical endoplasmic reticulum function as membrane protein trafficking hubs.

    Science.gov (United States)

    Fox, Philip D; Haberkorn, Christopher J; Weigel, Aubrey V; Higgins, Jenny L; Akin, Elizabeth J; Kennedy, Matthew J; Krapf, Diego; Tamkun, Michael M

    2013-09-01

    In mammalian cells, the cortical endoplasmic reticulum (cER) is a network of tubules and cisterns that lie in close apposition to the plasma membrane (PM). We provide evidence that PM domains enriched in underlying cER function as trafficking hubs for insertion and removal of PM proteins in HEK 293 cells. By simultaneously visualizing cER and various transmembrane protein cargoes with total internal reflectance fluorescence microscopy, we demonstrate that the majority of exocytotic delivery events for a recycled membrane protein or for a membrane protein being delivered to the PM for the first time occur at regions enriched in cER. Likewise, we observed recurring clathrin clusters and functional endocytosis of PM proteins preferentially at the cER-enriched regions. Thus the cER network serves to organize the molecular machinery for both insertion and removal of cell surface proteins, highlighting a novel role for these unique cellular microdomains in membrane trafficking.

  16. Southern African Office of Astronomy for Development: A New Hub for Astronomy for Development

    Science.gov (United States)

    Mutondo, Moola S.; Simpemba, Prospery

    2016-10-01

    A new Astronomy for Development hub needs innovative tools and programs. SAROAD is developing exciting tools integrating Raspberry Pi technology to bring cost-effective astronomy content to learning centres. SAROAD would also like to report achievements in realizing the IAU's strategic plan. In order to manage, evaluate and coordinate regional IAU (International Astronomical Union) capacity building programmes, including the recruitment and mobilization of volunteers, SAROAD has built an intranet that is accessible to regional members upon request. Using this resource, regional members can see and participate in regional activities. SAROAD has commenced with projects in the three Task Force areas of Universities and Research, Children and Schools and Public Outreach. Under the three Task Force areas, a total of seven projects have commenced in Zambia (some supported by funds from IAU Annual Call for proposals).

  17. The Development of Jomo Kenyatta International Airport as a Regional Aviation Hub

    Science.gov (United States)

    Irandu, Evaristus M.; Rhoades, Dawna L.

    2006-01-01

    Air transportation plays an important role in the social and economic development of the global system and the countries that seek to participate in it. As Africa seeks to take its place in the global economy, it is increasingly looking to aviation as the primary means of connecting its people and goods with the world. It has been suggested that Africa as a continent needs to move toward a system of hubs to optimize its scarce resources. Jomo Kenyatta International Airport in Nairobi, Kenya, is one of the airports in the eastern region of Africa that is seeking to fill this role. This paper discusses the prospects for success and the challenges that it will need to overcome, including projections through 2020 for the growth in passenger and cargo traffic.

  18. Membrane contact sites, ancient and central hubs of cellular lipid logistics.

    Science.gov (United States)

    Jain, Amrita; Holthuis, Joost C M

    2017-09-01

    Membrane contact sites (MCSs) are regions where two organelles are closely apposed to facilitate molecular communication and promote a functional integration of compartmentalized cellular processes. There is growing evidence that MCSs play key roles in controlling intracellular lipid flows and distributions. Strikingly, even organelles connected by vesicular trafficking exchange lipids en bulk via lipid transfer proteins that operate at MCSs. Herein, we describe how MCSs developed into central hubs of lipid logistics during the evolution of eukaryotic cells. We then focus on how modern eukaryotes exploit MCSs to help solve a major logistical problem, namely to preserve the unique lipid mixtures of their early and late secretory organelles in the face of extensive vesicular trafficking. This article is part of a Special Issue entitled: Membrane Contact Sites edited by Christian Ungermann and Benoit Kornmann. Copyright © 2017. Published by Elsevier B.V.

  19. MNCS' PERCEPTION ON THE FEASIBILITY OF SOUTH KOREA AS A BUSINESS HUB OF NORTHEAST ASIA

    Directory of Open Access Journals (Sweden)

    You-Il Lee

    2004-01-01

    Full Text Available Since the financial crisis of 1997, the South Korean government has moved towards a new market-driven paradigm of economic growth based on foreign direct investment (FDI replacing the decades old state-driven economic growth model. One of the attempts made by the government is its ambition to transform the nation into a business and economic hub of Northeast Asia. However, despite the growing concern on the topic among government agencies, media, research centers and academia, the absence of a cohesive and realistic approach to the issue is a relative void in the literature. This paper, which is based on findings from interviews with foreign companies operating in Korea during 2002, offers a cultural and institutional insight into the critical and often invisible issues to be considered for a successful realization of the vision.

  20. On the interconnection of stable protein complexes: inter-complex hubs and their conservation in Saccharomyces cerevisiae and Homo sapiens networks.

    Science.gov (United States)

    Guerra, Concettina

    2015-01-01

    Protein complexes are key molecular entities that perform a variety of essential cellular functions. The connectivity of proteins within a complex has been widely investigated with both experimental and computational techniques. We developed a computational approach to identify and characterise proteins that play a role in interconnecting complexes. We computed a measure of inter-complex centrality, the crossroad index, based on disjoint paths connecting proteins in distinct complexes and identified inter-complex hubs as proteins with a high value of the crossroad index. We applied the approach to a set of stable complexes in Saccharomyces cerevisiae and in Homo sapiens. Just as done for hubs, we evaluated the topological and biological properties of inter-complex hubs addressing the following questions. Do inter-complex hubs tend to be evolutionary conserved? What is the relation between crossroad index and essentiality? We found a good correlation between inter-complex hubs and both evolutionary conservation and essentiality.

  1. A unique four-hub protein cluster associates to glioblastoma progression.

    Directory of Open Access Journals (Sweden)

    Pasquale Simeone

    Full Text Available Gliomas are the most frequent brain tumors. Among them, glioblastomas are malignant and largely resistant to available treatments. Histopathology is the gold standard for classification and grading of brain tumors. However, brain tumor heterogeneity is remarkable and histopathology procedures for glioma classification remain unsatisfactory for predicting disease course as well as response to treatment. Proteins that tightly associate with cancer differentiation and progression, can bear important prognostic information. Here, we describe the identification of protein clusters differentially expressed in high-grade versus low-grade gliomas. Tissue samples from 25 high-grade tumors, 10 low-grade tumors and 5 normal brain cortices were analyzed by 2D-PAGE and proteomic profiling by mass spectrometry. This led to identify 48 differentially expressed protein markers between tumors and normal samples. Protein clustering by multivariate analyses (PCA and PLS-DA provided discrimination between pathological samples to an unprecedented extent, and revealed a unique network of deranged proteins. We discovered a novel glioblastoma control module centered on four major network hubs: Huntingtin, HNF4α, c-Myc and 14-3-3ζ. Immunohistochemistry, western blotting and unbiased proteome-wide meta-analysis revealed altered expression of this glioblastoma control module in human glioma samples as compared with normal controls. Moreover, the four-hub network was found to cross-talk with both p53 and EGFR pathways. In summary, the findings of this study indicate the existence of a unifying signaling module controlling glioblastoma pathogenesis and malignant progression, and suggest novel targets for development of diagnostic and therapeutic procedures.

  2. Southern Africa Regional Office of Astronomy for Development: A New Hub for Astronomy for Development

    Science.gov (United States)

    Siseho Mutondo, Moola

    2015-08-01

    A new Astronomy for Development hub needs innovative tools and programs. SAROAD is developing exciting tools integrating Raspberry Pi® technology to bring cost-effective astronomy content to learning centres. SAROAD would also like to report achievements in realising the IAU's strategic plan. In order to manage, evaluate and coordinate regional IAU capacity building programmes, including the recruitment and mobilisation of volunteers, SAROAD has built an intranet that is accessible to regional members upon request. Using this resource, regional members can see and participate in regional activities. This resource also forms the foundation for closer collaboration between SAROAD member countries. SAROAD has commenced with projects in the three Task Force areas of Universities and Research, Children and Schools and Public Outreach. Under the three Task Force areas, a total of seven projects have commenced in Zambia. A further two projects involve the collaboration of Zambia and other regional member countries in order to foster engagement with important regional astronomy facilities (e.g. SKA). SAROAD has identified the IAU’s International Year of Light and a starting point for offering regional support for IAU-endorsed global activities. SAROAD has set up a hub dedicated to regional events and activities about the International Year of Light. SAROAD has a database of regional authorities to enable contact with the region's decision makers and experts. SAROAD will hold an annual event which brings forum for astronomy for development. The creation of the database and the SAROAD Road show is a first step towards this goal. The SAROAD website has helped to advertise upcoming events for astronomy development and education; it is used to provide advice, guidance and information for astronomers in all countries in the Southern Africa. Fundraising is the primary goal for SAROAD in 2015 towards financial self-sufficiency by 2020. We report on the methods that work best

  3. CFTR: a hub for kinases and crosstalk of cAMP and Ca2+.

    Science.gov (United States)

    Kunzelmann, Karl; Mehta, Anil

    2013-09-01

    Cystic fibrosis (CF) is caused by mutations in the CF transmembrane conductance regulator (CFTR). The resulting disease is pleiotropic consistent with the idea that CFTR acts as a node within a network of signalling proteins. CFTR is not only a regulator of multiple transport proteins and controlled by numerous kinases but also participates in many signalling pathways that are disrupted after expression of its commonest mutant (F508del-CFTR). It operates in membrane compartments creating a scaffold for cytoskeletal elements, surface receptors, kinases and phosphodiesterases. CFTR is exposed to membrane-local second messengers such that a CFTR-interacting, low cellular energy sensor kinase (AMP- and ADP-activated kinase, AMPK) signals through a high energy phosphohistidine protein kinase (nucleoside diphosphate kinase, NDPK). CFTR also translocates a Ca(2+)-dependent adenylate cyclase to its proximity so that a rigid separation between cAMP-dependent and Ca(2+)-dependent regulation of Cl(-) transport becomes obsolete. In the presence of wild-type CFTR, parallel activation of CFTR and outwardly rectifying anoctamin 6 Cl(-) channels is observed, while the Ca(2+)-activated anoctamin 1 Cl(-) channel is inhibited. In contrast, in CF cells, CFTR is missing/mislocalized and the outwardly rectifying chloride channel is attenuated while Ca(2+)-dependent Cl(-) secretion (anoctamin 1) appears upregulated. Additionally, we consider the idea that F508del-CFTR when trapped in the endoplasmic reticulum augments IP3-mediated Ca(2+) release by providing a shunt pathway for Cl(-). CFTR and the IP3 receptor share the characteristic that they both assemble their partner proteins to increase the plasticity of their hub responses. In CF, the CFTR hub fails to form at the plasma membrane, with widespread detrimental consequences for cell signalling.

  4. White Matter Disruptions in Schizophrenia Are Spatially Widespread and Topologically Converge on Brain Network Hubs.

    Science.gov (United States)

    Klauser, Paul; Baker, Simon T; Cropley, Vanessa L; Bousman, Chad; Fornito, Alex; Cocchi, Luca; Fullerton, Janice M; Rasser, Paul; Schall, Ulrich; Henskens, Frans; Michie, Patricia T; Loughland, Carmel; Catts, Stanley V; Mowry, Bryan; Weickert, Thomas W; Shannon Weickert, Cynthia; Carr, Vaughan; Lenroot, Rhoshel; Pantelis, Christos; Zalesky, Andrew

    2017-03-01

    White matter abnormalities associated with schizophrenia have been widely reported, although the consistency of findings across studies is moderate. In this study, neuroimaging was used to investigate white matter pathology and its impact on whole-brain white matter connectivity in one of the largest samples of patients with schizophrenia. Fractional anisotropy (FA) and mean diffusivity (MD) were compared between patients with schizophrenia or schizoaffective disorder (n = 326) and age-matched healthy controls (n = 197). Between-group differences in FA and MD were assessed using voxel-based analysis and permutation testing. Automated whole-brain white matter fiber tracking and the network-based statistic were used to characterize the impact of white matter pathology on the connectome and its rich club. Significant reductions in FA associated with schizophrenia were widespread, encompassing more than 40% (234ml) of cerebral white matter by volume and involving all cerebral lobes. Significant increases in MD were also widespread and distributed similarly. The corpus callosum, cingulum, and thalamic radiations exhibited the most extensive pathology according to effect size. More than 50% of cortico-cortical and cortico-subcortical white matter fiber bundles comprising the connectome were disrupted in schizophrenia. Connections between hub regions comprising the rich club were disproportionately affected. Pathology did not differ between patients with schizophrenia and schizoaffective disorder and was not mediated by medication. In conclusion, although connectivity between cerebral hubs is most extensively disturbed in schizophrenia, white matter pathology is widespread, affecting all cerebral lobes and the cerebellum, leading to disruptions in the majority of the brain's fiber bundles. © The Author 2016. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  5. Hubs of Anticorrelation in High-Resolution Resting-State Functional Connectivity Network Architecture.

    Science.gov (United States)

    Gopinath, Kaundinya; Krishnamurthy, Venkatagiri; Cabanban, Romeo; Crosson, Bruce A

    2015-06-01

    A major focus of brain research recently has been to map the resting-state functional connectivity (rsFC) network architecture of the normal brain and pathology through functional magnetic resonance imaging. However, the phenomenon of anticorrelations in resting-state signals between different brain regions has not been adequately examined. The preponderance of studies on resting-state fMRI (rsFMRI) have either ignored anticorrelations in rsFC networks or adopted methods in data analysis, which have rendered anticorrelations in rsFC networks uninterpretable. The few studies that have examined anticorrelations in rsFC networks using conventional methods have found anticorrelations to be weak in strength and not very reproducible across subjects. Anticorrelations in rsFC network architecture could reflect mechanisms that subserve a number of important brain processes. In this preliminary study, we examined the properties of anticorrelated rsFC networks by systematically focusing on negative cross-correlation coefficients (CCs) among rsFMRI voxel time series across the brain with graph theory-based network analysis. A number of methods were implemented to enhance the neuronal specificity of resting-state functional connections that yield negative CCs, although at the cost of decreased sensitivity. Hubs of anticorrelation were seen in a number of cortical and subcortical brain regions. Examination of the anticorrelation maps of these hubs indicated that negative CCs in rsFC network architecture highlight a number of regulatory interactions between brain networks and regions, including reciprocal modulations, suppression, inhibition, and neurofeedback.

  6. Multilevel analysis of elastic morphology: The mantis shrimp's spring.

    Science.gov (United States)

    Rosario, M V; Patek, S N

    2015-09-01

    Spring systems, whether natural or engineered, are composed of compliant and rigid regions. Biological springs are often similar to monolithic structures that distribute compliance and rigidity across the whole system. For example, to confer different amounts of compliance in distinct regions within a single structure, biological systems typically vary regional morphology through thickening or elongation. Here, we analyze the monolithic spring in mantis shrimp (Stomatopoda) raptorial appendages to rapidly acquire or process prey. We quantified the shape of cross-sections of the merus segment of the raptorial appendage. We also examined specific regions of the merus that are hypothesized to either store elastic energy or provide structural support to permit energy storage in other regions of the system. We found that while all mantis shrimp contain thicker ventral bars in distal cross-sections, differences in thickness are more pronounced in high-impact "smasher" mantis shrimp than in the slower-striking "spearer" mantis shrimp. We also found that spearer cross-sections are more circular while those of smashers are more eccentric with elongation along the dorso-ventral axis. The results suggest that the regional thickening of ventral bars provides structural support for resisting spring compression and also reduces flexural stiffness along the system's long axis. This multilevel morphological analysis offers a foundation for understanding the evolution and mechanics of monolithic systems in biology. © 2015 Wiley Periodicals, Inc.

  7. Passive base isolation with superelastic nitinol SMA helical springs

    Science.gov (United States)

    Huang, Bin; Zhang, Haiyang; Wang, Han; Song, Gangbing

    2014-06-01

    Seismic isolation of structures such as multi-story buildings, nuclear reactors, bridges, and liquid storage tanks should be designed to preserve structural integrity. By implementing seismic isolation technology, the deformation of superstructures can be dramatically reduced, consequently helping to protect their safety as well. In this paper, an innovative type of passive base isolation system, which is mainly composed of superelastic nitinol SMA helical springs, is developed. In order to verify the effectiveness of the proposed system, a two-story experimental steel frame model is constructed, and two superelastic SMA helical springs are thermo-mechanically built in the laboratory. To describe the nonlinear mechanical properties of the superelastic SMA helical springs under reciprocating load, a phenomenological model is presented in terms of a series of tensile tests. Afterwards, a numerical model of the two-story frame with the suggested isolation system is set up to simulate the response of the isolated frame subjected to an earthquake. Both the experimental and the numerical simulation results indicate that the proposed base isolation system can remarkably suppress structural vibrations and has improved isolation effects when compared with a steel spring isolation system. Due to the capabilities of energy dissipation as well as fully re-centering, it is very applicable to utilize the suggested isolation system in base isolated structures to resist earthquakes.

  8. Zero-Spring-Rate Mechanism/Air Suspension Cart

    Science.gov (United States)

    Woodard, Stanley E.; Cooley, Victor M.

    1991-01-01

    Compact mechanism suspends articulating flexible structures with minimal constraints. Zero-spring-rate mechanism (ZSRM) air suspension cart used to suspend flexible, "mass-critical" articles like lightweight spacecraft undergoing such large motions as slewing, translation, and telescoping/retraction. Suspends flexible article undergoing large rigid-body motion concurrent with vibratory motion, with minimal interaction between suspended article and suspending hardware. Adaptive to active control, which reduces undesirable effects caused by friction, nonlinearity, and mass coupling. Practical for most suspension applications.

  9. Differential evolution algorithm for multi-commodity and multi-level of service hub covering location problem

    Directory of Open Access Journals (Sweden)

    M. Setak

    2013-01-01

    Full Text Available The hub location problem involves a network of origins and destinations over which transportation takes place. There are many studies associated with finding the location of hub nodes and the allocation of demand nodes to these located hub nodes to transfer the only one kind of commodity under one level of service. However, in this study, carrying different commodity types from origin to destination under various levels of services (e.g. price, punctuality, reliability or transit time is studied. Quality of services experienced by users such as speed, convenience, comfort and security of transportation facilities and services is considered as the level of service. In each system, different kinds of commodities with various levels of services can be transmitted. The appropriate level of service that a commodity can be transmitted through is chosen by customer preferences and the specification of the commodity. So, a mixed integer programming formulation for single allocation hub covering location problem, which is based on the idea of transferring multi commodity flows under multi levels of service is presented. These two are applied concepts, multi-commodity and multi-level of service, which make the model's assumptions closer to the real world problems. In addition, a differential evolution algorithm is designed to find near-optimal solutions. The obtained solutions using differential evolution (DE algorithm (upper bound, where its parameters are tuned by response surface methodology, are compared with exact solutions and computed lower bounds by linear relaxation technique to prove the efficiency of proposed DE algorithm.

  10. Air network performance and hub competitive position: evaluation of primary airports in East and South-East Asia

    NARCIS (Netherlands)

    G. Burghouwt; J. de Wit; J. Veldhuis; H. Matsumoto

    2009-01-01

    The growth of hub-and-spoke operations has changed the structure of competition among airlines and airports, meaning that airlines now compete both directly (air services from A to B) as well as indirectly (services from A to B via H). Traditional measures of airport performance, such as passenger e

  11. Joint Optimization of Star P-hub Median Problem and Seat Inventory Control Decisions Considering a Hybrid Routing Transportation System

    Directory of Open Access Journals (Sweden)

    Hamid Tikani

    2016-11-01

    Full Text Available In this paper, we study the problem of integrated capacitated hub location problem and seat inventory control considering concept and techniques of revenue management. We consider an airline company maximizes its revenue by utilizing the best network topology and providing proper booking limits for all itineraries and fare classes. The transportation system arises in the form of a star/star network and includes both hub-stop and non-stop flights. This problem is formulated as a two-stage stochastic integer program with mixed-integer recourse. We solve various instances carried out from the Turkish network data set. Due to the NP-hardness of the problem, we propose a hybrid optimization method, consisting of an evolutionary algorithm based on genetic algorithm and exact solution. The quality of the solutions found by the proposed meta-heuristic is compared with the original version of GA and the mathematical programming model. The results obtained by the proposed model imply that integrating hub location and seat inventory control problem would help to increase the total revenue of airline companies. Also, in the case of serving non-stop flights, the model can provide more profit by employing less number of hubs.

  12. Optimization of Hybrid Hub-and-Spoke Network Operation for Less-Than-Truckload Freight Transportation considering Incremental Quantity Discount

    Directory of Open Access Journals (Sweden)

    Weiya Chen

    2014-01-01

    Full Text Available This paper presents a mixed integer linear programming model (MILP for optimizing the hybrid hub-and-spoke network operation for a less-than-truckload transportation service. The model aims to minimize the total operation costs (transportation cost and transfer cost, given the determined demand matrix, truck load capacity, and uncapacitated road transportation. The model also incorporates an incremental quantity discount function to solve the reversal of the total cost and the total demand. The model is applied to a real case of a Chinese transportation company engaged in nationwide freight transportation. The numerical example shows that, with uncapacitated road transportation, the total costs and the total vehicle trips of the hybrid hub-and-spoke network operation are, respectively, 8.0% and 15.3% less than those of the pure hub-and-spoke network operation, and the assumed capacity constraints in an extension model result in more target costs on the hybrid hub-and-spoke network. The two models can be used to support the decision making in network operations by transportation and logistics companies.

  13. The role of FlhF and HubP as polar landmark proteins in Shewanella putrefaciens CN-32.

    Science.gov (United States)

    Rossmann, Florian; Brenzinger, Susanne; Knauer, Carina; Dörrich, Anja K; Bubendorfer, Sebastian; Ruppert, Ulrike; Bange, Gert; Thormann, Kai M

    2015-11-01

    Spatiotemporal regulation of cell polarity plays a role in many fundamental processes in bacteria and often relies on 'landmark' proteins which recruit the corresponding clients to their designated position. Here, we explored the localization of two multi-protein complexes, the polar flagellar motor and the chemotaxis array, in Shewanella putrefaciens CN-32. We demonstrate that polar positioning of the flagellar system, but not of the chemotaxis system, depends on the GTPase FlhF. In contrast, the chemotaxis array is recruited by a transmembrane protein which we identified as the functional ortholog of Vibrio cholerae HubP. Mediated by its periplasmic N-terminal LysM domain, SpHubP exhibits an FlhF-independent localization pattern during cell cycle similar to its Vibrio counterpart and also has a role in proper chromosome segregation. In addition, while not affecting flagellar positioning, SpHubP is crucial for normal flagellar function and is involved in type IV pili-mediated twitching motility. We hypothesize that a group of HubP/FimV homologs, characterized by a rather conserved N-terminal periplasmic section required for polar targeting and a highly variable acidic cytoplasmic part, primarily mediating recruitment of client proteins, serves as polar markers in various bacterial species with respect to different cellular functions. © 2015 John Wiley & Sons Ltd.

  14. Dynamic Migration Intentions and the Impact of Socio-Institutional Environments: A Transit Migration Hub in Turkey

    NARCIS (Netherlands)

    Wissink, M.J.; Düvell, F.; van Eerdewijk, A.

    2013-01-01

    Transit migration is generally defined by migrants having the intention to move onwards to a third country. Based on an empirical investigation in Izmir, a transit migration hub in Turkey, this paper critically discusses intentionality as a valid dimension in conceptualisations of transit migration.

  15. Application of a Non-linear Program to the Establishment of a Hub and Spoke System in Africa

    Science.gov (United States)

    2010-06-01

    areas of commerce, light manufacturing, and the tourism industry (United States Department of State, 2009). Generally speaking, Kenya maintains a...possess commercial and/or military vehicle and equipment repair facilities that could be used to maintain CF materiel in theatre . The Hub...

  16. Dynamic Migration Intentions and the Impact of Socio-Institutional Environments: A Transit Migration Hub in Turkey

    NARCIS (Netherlands)

    Wissink, M.J.; Düvell, F.; van Eerdewijk, A.

    2013-01-01

    Transit migration is generally defined by migrants having the intention to move onwards to a third country. Based on an empirical investigation in Izmir, a transit migration hub in Turkey, this paper critically discusses intentionality as a valid dimension in conceptualisations of transit migration.

  17. The Quest for Regional Hub of Education: Growing Heterarchies, Organizational Hybridization, and New Governance in Singapore and Malaysia

    Science.gov (United States)

    Mok, Ka Ho

    2011-01-01

    With strong intention to enhance the global competitiveness of their higher education systems, the governments of Singapore and Malaysia have made attempts to develop their societies into regional hubs of education; hence transnational education has become increasingly popular in these societies. In order to attract more students from overseas to…

  18. Hub vortex helical instability as the origin of wake meandering in the lee of a model wind-turbine

    Science.gov (United States)

    Viola, Francesco; Iungo, Giacomo Valerio; Camarri, Simone; Porte-Agel, Fernando; Gallaire, Francois

    2012-11-01

    Wind tunnel measurements were performed for the wake produced by a three-bladed wind turbine immersed in uniform flow. These tests show the presence of a vorticity structure in the near wake region mainly oriented along the streamwise direction, which is denoted as hub vortex. The hub vortex is characterized by oscillations with frequencies lower than the one connected to the rotational velocity of the rotor, which are ascribed to wake meandering by previous works. This phenomenon consists in transversal oscillations of the wind turbine wake, which are excited by the shedding of vorticity structures from the rotor disc acting as a bluff body. In this work temporal and spatial linear stability analyses of a wind turbine wake are performed on a base flow obtained through time-averaged wind tunnel velocity measurements. This study shows that the low frequency spectral component detected experimentally is the result of a convective instability of the hub vortex, which is characterized by a counter-winding single-helix structure. Simultaneous hot-wire measurements confirm the presence of a helicoidal unstable mode of the hub vortex with a streamwise wavenumber roughly equal to the one predicted from the linear instability analysis.

  19. Developing and Launching an Online Hub to Facilitate the Exchange of Research Knowledge in Education: The Case of the OERE

    Science.gov (United States)

    Tuters, Stephanie; Read, Robyn; Harris, Shasta Carr; Anwar, Arif; Levin, Ben

    2012-01-01

    This paper outlines the process by which the Ontario Education Research Exchange (OERE), part of the Knowledge Network of Applied Education Research, developed and launched an online hub of education research summaries to facilitate greater use of research by stakeholders in the field of education. The project is an effort in knowledge…

  20. Debate over a Proposed FedEx Distribution Hub: Examining the Role of Consensus, Power and Norms of Communication Ethics.

    Science.gov (United States)

    Thompson, Kathleen B.

    This paper examines an ongoing community debate over a proposed FedEx distribution hub to be constructed at the local airport. The essay looks to theorists, including Patsy Healey, Richard Johannesen, Daniel Kemmis, James Klumpp, and Martha Nussbaum. These theorists provide a way to view the role of consensus, power, and norms of communication…