WorldWideScience

Sample records for houses technology status

  1. Ground-Source Integrated Heat Pump for Near-Zero Energy Houses: Technology Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, Richard W [ORNL; Rice, C Keith [ORNL; Baxter, Van D [ORNL; Craddick, William G [ORNL

    2007-09-01

    The energy service needs of a net-zero-energy house (ZEH) include space heating and cooling, water heating, ventilation, dehumidification, and humidification, depending on the requirements of the specific location. These requirements differ in significant ways from those of current housing. For instance, the most recent DOE buildings energy data (DOE/BED 2007) indicate that on average {approx}43% of residential buildings primary energy use is for space heating and cooling, vs. {approx}12% for water heating (about a 3.6:1 ratio). In contrast, for the particular prototype ZEH structures used in the analyses in this report, that ratio ranges from about 0.3:1 to 1.6:1 depending on location. The high-performance envelope of a ZEH results in much lower space heating and cooling loads relative to current housing and also makes the house sufficiently air-tight to require mechanical ventilation for indoor air quality. These envelope characteristics mean that the space conditioning load will be closer in size to the water heating load, which depends on occupant behavior and thus is not expected to drop by any significant amount because of an improved envelope. In some locations such as the Gulf Coast area, additional dehumidification will almost certainly be required during the shoulder and cooling seasons. In locales with heavy space heating needs, supplemental humidification may be needed because of health concerns or may be desired for improved occupant comfort. The U.S. Department of Energy (DOE) has determined that achieving their ZEH goal will require energy service equipment that can meet these needs while using 50% less energy than current equipment. One promising approach to meeting this requirement is through an integrated heat pump (IHP) - a single system based on heat pumping technology. The energy benefits of an IHP stem from the ability to utilize otherwise wasted energy; for example, heat rejected by the space cooling operation can be used for water heating

  2. MRAM Technology Status

    Science.gov (United States)

    Heidecker, Jason

    2013-01-01

    Magnetoresistive Random Access Memory (MRAM) is much different from conventional types of memory like SRAM, DRAM, and Flash, where electric charge is used to store information. Instead of exploiting the charge of an electron, MRAM uses its spin to store data. This new type of electronics is known as "spintronics." The primary focus of this report is the current generation of MRAM technology, and its reliability, vendors, and space-readiness.

  3. ATRF Houses the Latest DNA Sequencing Technologies | Poster

    Science.gov (United States)

    By Ashley DeVine, Staff Writer By the end of October, the Advanced Technology Research Facility (ATRF) will be one of the few facilities in the world to house all of the latest DNA sequencing technologies.

  4. Access to housing subsidies, housing status, drug use and HIV risk among low-income U.S. urban residents

    Directory of Open Access Journals (Sweden)

    Dickson-Gomez Julia

    2011-11-01

    Full Text Available Abstract Background Much research has shown an association between homelessness and unstable housing and HIV risk but most has relied on relatively narrow definitions of housing status that preclude a deeper understanding of this relationship. Fewer studies have examined access to housing subsidies and supportive housing programs among low-income populations with different personal characteristics. This paper explores personal characteristics associated with access to housing subsidies and supportive housing, the relationship between personal characteristics and housing status, and the relationship between housing status and sexual risk behaviors among low-income urban residents. Methods Surveys were conducted with 392 low-income residents from Hartford and East Harford, Connecticut through a targeted sampling plan. We measured personal characteristics (income, education, use of crack, heroin, or cocaine in the last 6 months, receipt of welfare benefits, mental illness diagnosis, arrest, criminal conviction, longest prison term served, and self-reported HIV diagnosis; access to housing subsidies or supportive housing programs; current housing status; and sexual risk behaviors. To answer the aims above, we performed univariate analyses using Chi-square or 2-sided ANOVA's. Those with significance levels above (0.10 were included in multivariate analyses. We performed 2 separate multiple regressions to determine the effects of personal characteristics on access to housing subsidies and access to supportive housing respectively. We used multinomial main effects logistic regression to determine the effects of housing status on sexual risk behavior. Results Being HIV positive or having a mental illness predicted access to housing subsidies and supportive housing, while having a criminal conviction was not related to access to either housing subsidies or supportive housing. Drug use was associated with poorer housing statuses such as living on the

  5. Status quo of supply technology

    Energy Technology Data Exchange (ETDEWEB)

    Noda, Shigeo

    1987-09-01

    Problems for gas supply function, activity of the Gas Association, and technological development mainly of the presented subjects are reported. According to the materials released by the Gas Associattion, demands for city gas by the 21st Century is expected to be rather high with 3.6% annual growth rate. It is premissed on an assumption that the superior quality of the city gas satisfying customer requirements would be further upgraded. The problems confronted by the supply function for this purpose are the pursuit for less cost, improvement in security, and stable gas supply. The Gas Association carried out research, investigation, preparation of standards, etc., and published instructive materials such as guide for main and branch piping, guide for supply piping, technical standards for gas related works, etc. It also has been endeavoring to popularize the use of polyethylene pipies, and studying the evaluation method for the renewal and repair of gas conduits and house regulator supply system, etc. The supply function has been working on the cutting dowm of costs, inprovement in security, and developing technologies such as underground probing radar, inteligent pipe locator, identifier for gas and water supply tubes, estimation of ground subsidence, inspection of inside of pipes by a television camera, etc. (1 tab)

  6. Housing Status and HIV Risk Behaviors among Transgender Women in Los Angeles

    Science.gov (United States)

    Fletcher, Jesse B.; Kisler, Kimberly A.; Reback, Cathy J.

    2014-01-01

    Due to social stigma, lack of social support, and minimal legal employment opportunities, transgender women (transwomen) face elevated rates of unstable housing. This study examined the association between housing status and HIV risk behaviors among 517 transwomen encountered through street outreach. Seven variables (including sociodemographics, HIV status, housing status, and sexual partner type) were used to estimate partial associations during multivariable analyses; housing status was coded trichotomously (housed, marginally housed, and homeless) for these analyses. Results demonstrated that homeless and marginally housed transwomen engaged in significantly higher rates of illicit drug use than housed transwomen; however, marginally housed and housed transwomen engaged in significantly higher rates of illegal hormone injections than homeless transwomen. Rates of sex work were high in the sample as a whole, though sex with an exchange partner was most common among the marginally housed transwomen. Multivariate logistic regression revealed that unstable housing moderated the association between HIV status and engagement in unprotected serodiscordant anal intercourse. The marginally housed transwomen exhibited the greatest risk profile for HIV acquisition or transmission. PMID:25190499

  7. Technology status: Batteries and fuel cells

    Science.gov (United States)

    Fordyce, J. S.

    1978-01-01

    The current status of research and development programs on batteries and fuel cells and the technology goals being pursued are discussed. Emphasis is placed upon those technologies relevant to earth orbital electric energy storage applications.

  8. The Effects of Housing Status, Stability and the Social Contexts of Housing on Drug and Sexual Risk Behaviors.

    Science.gov (United States)

    Dickson-Gomez, Julia; McAuliffe, Timothy; Quinn, Katherine

    2017-02-27

    prison sentences who lived with drug users had more sexual partners, and those with longer prison sentences who doubled up had more sex partners. Results of this study indicate that measures of housing status not often considered in the literature such as the social context of housing have significant effects on HIV risk.

  9. Inclusive Design Instead of Assistive Technology in Housing

    OpenAIRE

    Lundberg, Stefan; Larsson, Tore J.

    2008-01-01

    Abstract The growing number of inhabitants in need of care and rehabilitation is a common problem in most industrialised countries. More medical conditions can be treated, but often at increasing costs. Care and housing are often interlinked and more interest is being paid to the possibility of offering care to elderly in their own homes. It is not only technology and care that matter; an equally important issue is how well the dwellings are adapted to care, both from a spatial perspective an...

  10. Thermionic fuel element technology status

    Science.gov (United States)

    Holland, J. W.; Horner, M. W.; Yang, L.

    1985-01-01

    The results of research, conducted between the mid-1960s and 1973, on the multiconverter thermionic fuel elements (TFEs) that comprise the reactor core of an SP-100 thermionic reactor system are presented. Fueled-emitter technology, insulator technology and cell and TFE assembly technology of the prototypical TFEs which were tested in-pile and out-of-pile during these years are described. The proto-TFEs have demonstrated reproducible performance within 5 percent and no premature failures within the 1.5 yr of operation (with projected 3-yr lifetimes). The two primary life-limiting factors had been identified as thermionic emitter dimensional increase due to interactions with the fuel and electrical insulator structural damage from fast neutrons. Multiple options for extending TFE lifetimes to 7 yr or longer are available and will be investigated in the 1984-1985 SP-100 program for resolution of critical technology issues. Design diagrams and test graphs are included.

  11. The Space House TM : Space Technologies in Architectural Design

    Science.gov (United States)

    Gampe, F.; Raitt, D.

    2002-01-01

    The word "space" has always been associated with and had a profound impact upon architectural design. Until relatively recently, however, the term has been used in a different sense to that understood by the aerospace community - for them, space was less abstract, more concrete and used in the context of space flight and space exploration, rather than, say, an empty area or space requiring to be filled by furniture. However, the two senses of the word space have now converged to some extent. Interior designers and architects have been involved in designing the interior of Skylab, the structure of the International Space Station, and futuristic space hotels. Today, architects are designing, and builders are building, houses, offices and other structures which incorporate a plethora of new technologies, materials and production processes in an effort not only to introduce innovative and adventurous ideas but also in an attempt to address environmental and social issues. Foremost among these new technologies and materials being considered today are those that have been developed for and by the space industry. This paper examines some of these space technologies, such as energy efficient solar cells, durable plastics, air and water filtration techniques, which have been adapted to both provide power while reducing energy consumption, conserve resources and so on. Several of these technologies have now been employed by the European Space Agency to develop a Space House TM - the first of its kind, which will be deployed not so much on planets like Mars, but rather here on Earth. The Space House TM, which exhibits many innovative features such as high strength light-weight carbon composites, active noise-damped, (glass and plastic) windows, low-cost solar arrays and latent heat storage, air and water purification systems will be described.

  12. Fossil energy waste management. Technology status report

    Energy Technology Data Exchange (ETDEWEB)

    Bossart, S.J.; Newman, D.A.

    1995-02-01

    This report describes the current status and recent accomplishments of the Fossil Energy Waste Management (FE WM) projects sponsored by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The primary goal of the Waste Management Program is to identify and develop optimal strategies to manage solid by-products from advanced coal technologies for the purpose of ensuring the competitiveness of advanced coal technologies as a future energy source. The projects in the Fossil Energy Waste Management Program are divided into three types of activities: Waste Characterization, Disposal Technologies, and Utilization Technologies. This technology status report includes a discussion on barriers to increased use of coal by-products. Also, the major technical and nontechnical challenges currently being addressed by the FE WM program are discussed. A bibliography of 96 citations and a list of project contacts is included if the reader is interested in obtaining additional information about the FE WM program.

  13. Current Status of House Fire Deaths among the Elderly

    OpenAIRE

    Moriya, Fumio

    2009-01-01

    The purpose of this study was to identify risk factors leading to house fire deaths among elderly individuals. Fire damage and autopsy results for 66 house fire victims (40 males, 26 females) aged 65 years or more were analyzed. Thirty-nine of these elderly individuals (26 males, 13 females) had lived alone, and 27 (14 males, 13 females) had lived with a spouse or family member. Mean CO-Hb saturation was 52.0% (range: 0-93.0%). In 53 cases, the buildings in which the deaths took place were on...

  14. Lost circulation technology development status

    Energy Technology Data Exchange (ETDEWEB)

    Glowka, D.A.; Schafer, D.M.; Loeppke, G.E.; Scott, D.D.; Wernig, M.D.; Wright, E.K.

    1992-07-01

    Lost circulation is the loss of drilling fluid from the wellbore to fractures or pores in the rock formation. In geothermal drilling, lost circulation is often a serious problem that contributes greatly to the cost of the average geothermal well. The Lost Circulation Technology Development Program is sponsored at Sandia National Laboratories by the US Department of Energy. The goal of the program is to reduce lost circulation costs by 30--50% through the development of mitigation and characterization technology. This paper describes the technical progress made in this program during the period April 1991--March 1992. 8 refs.

  15. The Neighborhood Environments of Mutual-help Recovery Houses: Comparisons by Perceived Socio-economic Status.

    Science.gov (United States)

    Ferrari, Joseph R; Groh, David R; Jason, Leonard A

    2009-01-01

    This study examined the setting/House-level characteristics of 160 self-governed, mutual-support substance abuse recovery homes (OHs) across the U.S. These dwellings were located in four different neighborhood types: upper/middle class (n = 23 Houses), urban working/lower class (n = 71 Houses), suburban upper/middle-class (n = 39 Houses), and suburban working/lower class (n = 27 Houses). Interior dwelling characteristics and amenities located within a 2-block radius were similar across the four neighborhood types. However, Houses in urban, working, and lower class neighborhoods reported more alcohol/drug intoxicated persons. Most importantly, despite the greater potential for environmental temptations and easier access for substances, none of the neighborhood factors including neighborhood socio-economic status significantly predicted relapse rates over a 12 month period.

  16. The relationship between housing status and HIV risk among active drug users: a qualitative analysis.

    Science.gov (United States)

    Dickson-Gomez, Julia; Hilario, Helena; Convey, Mark; Corbett, A Michelle; Weeks, Margaret; Martinez, Maria

    2009-01-01

    This paper examines the relationship between housing status and HIV risk using longitudinal, qualitative data collected in 2004-2005, from a purposeful sample of 65 active drug users in a variety of housed and homeless situations in Hartford, Connecticut. These data were supplemented with observations and in-depth interviews regarding drug use behavior collected in 2001-2005 to evaluate a peer-led HIV prevention intervention. Data reveal differences in social context within and among different housing statuses that affect HIV risk or protective behaviors including the ability to carry drug paraphernalia and HIV prevention materials, the amount of drugs in the immediate environment, access to subsidized and supportive housing, and relationships with those with whom drug users live. Policy implications of the findings, limitations to the data, and future research are discussed.

  17. Technological status of organic photovoltaics (OPV)

    DEFF Research Database (Denmark)

    Carlé, Jon Eggert; Krebs, Frederik C

    2013-01-01

    This paper gives a technological status of organic and polymer photovoltaics (OPV) for both single and tandem junctions. We list the current state-of-the-art at the laboratory level for very small rigid and mostly vacuum processed devices to larger area flexible and printed devices. In comparison...

  18. Status and assessment of photovoltaic technologies

    Science.gov (United States)

    Kazmerski, L. L.

    The history and status of the current photovoltaic technologies are reviewed and evaluated. The problems and strengths of single-crystal, polycrystalline, and amorphous technologies are discussed, compared, and assessed. Single-junction and multiple-junction or tandem cell configurations are evaluated for performance, processing, and engineering criteria. Some emphasis is placed on the emerging thin film options for low cost terrestrial applications. The basic photovoltaic system building block, the solar cell, is discussed along with important module developments and problems. Future technology and research directions are provided for materials, cells, and modules.

  19. Status and assessment of photovoltaic technologies

    Energy Technology Data Exchange (ETDEWEB)

    Kazmerski, L.L. (Solar Energy Research Inst., Golden, CO (USA))

    1989-01-01

    The history and status of the current photovoltaic technologies are reviewed and evaluated. The problems and strengths of single-crystal, polycrystalline, and amorphous technologies are discussed, compared and assessed. Single-junction and multiple-junction or tandem cell configurations are evaluated for performance, processing, and engineering criteria. Some emphasis is placed on the emerging thin film options for low cost terrestrial applications. Discussions centre around the basic photovoltaic system building block, the solar cell, but important module developments and problems are cited. Future technology and research directions are provided for materials, cells, and modules. (author).

  20. Current Status of Concentrator Photovoltaic (CPV) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Philipps, Simon P. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Bett, Andreas W. [Fraunhofer Inst. for Solar Energy Systems ISE, Freiburg (Germany); Horowitz, Kelsey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kurtz, Sarah [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-12-01

    This report summarizes the status of the concentrator photovoltaic (CPV) market and industry as well as current trends in research and technology. This report is intended to guide research agendas for Fraunhofer ISE, the National Renewable Energy Laboratory (NREL), and other R&D organizations. Version 1.1 of this report includes recent progress in CPV. The recent record module efficiency of 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve. 38.9% at Concentrator Standard Test Conditions (CSTC) is an impressive result, demonstrating the continuing opportunity for CPV technology to improve.

  1. The status of fuel cell technology

    Energy Technology Data Exchange (ETDEWEB)

    O' Sullivan, J.B.

    1991-02-20

    This brief status report provides an introduction to what fuel cells are, why they are important, what uses have been made of them to date, the goals and timetables of current programs, and who the players are in this vital technology. Copies of most of the slides presented and additional diagrams are appended to this paper. Further details can be obtained from the comprehensive texts cited in the bibliography. 11 refs., 44 figs.

  2. Assessment of research and technology transfer needs for wood-frame housing

    Science.gov (United States)

    Kevin Powell; David Tilotta; Karen Martinson

    2008-01-01

    Improvements to housing will require both research and the transfer of that research to homebuilders, homebuyers, and others in need of technology. This report summarizes results of a national survey on research and technology transfer needs for housing and prioritizes those needs. Survey participants included academicians, builders, code officials, government...

  3. Assessing health disparities in children using a modified housing-related socioeconomic status measure: a cross-sectional study

    Science.gov (United States)

    Ryu, Euijung; Wi, Chung-Il; Crow, Sheri S; Armasu, Sebastian M; Wheeler, Philip H; Sloan, Jeff A; Yawn, Barbara P; Beebe, Timothy J; Williams, Arthur R; Juhn, Young J

    2016-01-01

    Objectives Socioeconomic status (SES) is a well-established risk factor for many health outcomes. Recently, we developed an SES measure based on 4 housing-related characteristics (termed HOUSES) and demonstrated its ability to assess health disparities. In this study, we aimed to evaluate whether fewer housing-related characteristics could be used to provide a similar representation of SES. Study setting and participants We performed a cross-sectional study using parents/guardians of children aged 1–17 years from 2 US Midwestern counties (n=728 in Olmsted County, Minnesota, and n=701 in Jackson County, Missouri). Primary and secondary outcome measures For each participant, housing-related characteristics used in the formulation of HOUSES (assessed housing value, square footage, number of bedrooms and number of bathrooms) were obtained from the local government assessor's offices, and additional SES measures and health outcomes with known associations to SES (obesity, low birth weight and smoking exposure) were collected from a telephone survey. Housing characteristics with the greatest contribution for predicting the health outcomes were added to formulate a modified HOUSES index. Results Among the 4 housing characteristics used in the original HOUSES, the strongest contributions for predicting health outcomes were observed from assessed housing value and square footage (combined contribution ranged between 89% and 96%). Based on this observation, these 2 were used to calculate a modified HOUSES index. Correlation between modified HOUSES and other SES measures was comparable to the original HOUSES for both locations. Consistent with the original HOUSES formula, the strongest association with modified HOUSES was observed with smoking exposure (OR=0.24 with 95% CI 0.11 to 0.49 for comparing participants in highest HOUSES vs lowest group; overall p<0.001). Conclusions The modified HOUSES requires only 2 readily available housing characteristics thereby improving

  4. METC Clean Coal Technology status -- 1995 update

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, L.K.

    1995-06-01

    The Department of Energy (DOE) Clean Coal Technology (CCT) Program is assisting the private sector by funding demonstration programs to validate that CCT technologies are a low-risk, environmentally attractive, cost-competitive option for utility and industrial users. Since 1987, DOE has awarded 45 CCT projects worth a total value of $7 billion (including more than $2.3 billion of DOE funding). Within the CCT Program, the Morgantown Energy Technology Center (METC) is responsible for 17 advanced power generation systems and major industrial applications. METC is an active partner in advancement of these technologies via direct CCT funding and via close cooperation and coordination of internal and external research and development activities. By their nature, METC projects are typically 6-10 years in duration and, in some cases, very complex in nature. However, as a result of strong commercial partnerships, progress in the development and commercialization of major utility and industrial projects has, and will continue to occur. It is believed that advanced power generation systems and industrial applications are on the brink of commercial deployment. A status of METC CCT activities will be presented. Two projects have completed their operational phase, operations are underway at one project (two others are in the latter stages of construction/shakedown), four projects are in construction, six restructured. Also, present a snapshot of development activities that are an integral part of the advancement of these CCT initiatives will be presented.

  5. Maximizing Residential Energy Savings: Net Zero Energy House (ZEH) Technology Pathways

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, R.; Roberts, D.

    2008-11-01

    To meet current U.S. Department of Energy zero-energy home performance goals, new technologies and solutions must increase whole-house efficiency savings by an additional 40% relative to those provided by best available components and systems.

  6. Planetary Protection Technology Definition Team: Tasks, Status, and Feedback

    Science.gov (United States)

    Meyer, M. A.; Rummel, J. D.

    2016-10-01

    A Planetary Protection and Technology Definition Team will assess challenges to meeting planetary protection requirements to instruments and will suggest technological solutions. Status and initial findings will be reported.

  7. Housing culture

    DEFF Research Database (Denmark)

    Roesdahl, Else; Scholkmann, Barbara

    2007-01-01

    On houses and their furniture and fittings, and on the study of this - with a comparison of rural, urban, monastic and aristocratic housing, and a special section on heating technologies.......On houses and their furniture and fittings, and on the study of this - with a comparison of rural, urban, monastic and aristocratic housing, and a special section on heating technologies....

  8. Solarization/conservation technology development for existing housing. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Oberdick, W.

    1981-06-01

    The project objectives are: to develop a method for evaluationg existing residences for their energy solarization/conservation potential as well as carrying out the solarization/conservation work within context of the Community Development program; and to demonstrate appropriate methods of utilizing solar energy in existing Ann Arbor residences beyond that obtainable in a good conservation program. A general progress update is presented covering tasks related to community solarization/conservation characteristics and community system analysis and development. The process of selection and technical evaluation of houses for solarization/conservation project directed retrofit is described. A detailed report on the survey of utility data and a report on the solarization/conservation site audits are included. A detailed comparison of the audit data for both the audit and control group are appended. (LEW)

  9. Effectiveness of interventions to improve the health and housing status of homeless people: a rapid systematic review

    Directory of Open Access Journals (Sweden)

    Kouyoumdjian Fiona

    2011-08-01

    Full Text Available Abstract Background Research on interventions to positively impact health and housing status of people who are homeless has received substantially increased attention over the past 5 years. This rapid review examines recent evidence regarding interventions that have been shown to improve the health of homeless people, with particular focus on the effect of these interventions on housing status. Methods A total of 1,546 articles were identified by a structured search of five electronic databases, a hand search of grey literature and relevant journals, and contact with experts. Two reviewers independently screened the first 10% of titles and abstracts for relevance. Inter-rater reliability was high and as a result only one reviewer screened the remaining titles and abstracts. Articles were included if they were published between January 2004 and December 2009 and examined the effectiveness of an intervention to improve the health or healthcare utilization of people who were homeless, marginally housed, or at risk of homelessness. Two reviewers independently scored all relevant articles for quality. Results Eighty-four relevant studies were identified; none were of strong quality while ten were rated of moderate quality. For homeless people with mental illness, provision of housing upon hospital discharge was effective in improving sustained housing. For homeless people with substance abuse issues or concurrent disorders, provision of housing was associated with decreased substance use, relapses from periods of substance abstinence, and health services utilization, and increased housing tenure. Abstinent dependent housing was more effective in supporting housing status, substance abstinence, and improved psychiatric outcomes than non-abstinence dependent housing or no housing. Provision of housing also improved health outcomes among homeless populations with HIV. Health promotion programs can decrease risk behaviours among homeless populations

  10. Buried Waste Integrated Demonstration Technology Preparedness and Status Report Guidance

    Energy Technology Data Exchange (ETDEWEB)

    Blacker, P.B.; Bonnenberg, R.W.; Cannon, P.G.; Hyde, R.A.; Watson, L.R.

    1994-04-01

    A Technology Preparedness and Status Report is required for each Technical Task Plan funded by the Buried Waste Integrated Demonstration. This document provides guidance for the preparation of that report. Major sections of the report will include a subset of the need for the technology, objectives of the demonstration, technology description and readiness evaluation, demonstration requirements, and preparedness checklist and action plan.

  11. White House Technology Reinvestment Project Briefing And Transcripts

    Science.gov (United States)

    1993-04-12

    Technology Development, is in the SBIR are two entirely separate Cartier Room, which is to your right. concepts. I’m sorry, Deployment. I’m sorry, MR. GUDAS...libraries whereby access is provided to to lay up, both polymer , metal matrix a large number of people and ways in and ceramic matrix composites are

  12. Regional characteristics of individual housing units in Serbia from the aspect of applied building technologies

    Directory of Open Access Journals (Sweden)

    Jovanović-Popović Milica

    2014-01-01

    Full Text Available Individual housing units in Serbia have been studied from the aspect of applied technical solutions. Analyzed data have been collected during a field research in accordance with the current administrative regional division, and they represent a basis for definition of regional typology of individual housing units. Characteristic types of objects of each region’s typology have been further analyzed. Upon these analyses regional characteristics of individual housing units regarding applied construction types, building technologies and materials have been defined and presented. [Projekat Ministarstva nauke Republike Srbije, br. TR 36034: Investigation and Systematization of Serbian Housing in Context of Globalization and European Integration in the Framework of Quality and Living-Standard Improvement

  13. Home Automation : Smart home technology and template house design

    OpenAIRE

    Zheng, Zeya

    2013-01-01

    In this thesis, home automation’s general knowledge, technology information and each component will be introduced to the reader in the first half of the whole thesis. In the second half, thesis includes the Home Automation template design and market competitiveness analysis. The author assumes that the reader is going to spend lots of money to have a smart home. In this situation, the author introduces the home automation to the reader at each component. So the reader in this thesis actu...

  14. Technology Status of Thermionic Fuel Elements for Space Nuclear Power

    Science.gov (United States)

    Holland, J. W.; Yang, L.

    1984-01-01

    Thermionic reactor power systems are discussed with respect to their suitability for space missions. The technology status of thermionic emitters and sheath insulator assemblies is described along with testing of the thermionic fuel elements.

  15. Technology transfer: Half-way houses. No. 17

    Energy Technology Data Exchange (ETDEWEB)

    Seidel, R.W.

    1995-05-01

    In the fall of 1993, 1 was asked by the Center for National Security Studies (CNSS) of the Los Alamos National Laboratory (LANL) to study the ways in which technology transfer and defense conversion had been accomplished at General Atomics (GA) and Science Applications International Corporation (SAIC) by interviewing Harold Agnew, who had served as director of Los Alamos before becoming president of General Atomics in 1979, and J. Robert Beyster, who had been a staff member at Los Alamos and at General Atomics before founding SAIC in 1969. Harold Agnew readily complied with my request for an interview and also suggested that I talk to Douglas Fouquet, who is in charge of public relations at General Atomics and is their unofficial historian. Robert Beyster was not available for an interview, but, through the courtesy of John C. Hopkins, a former director of CNSS, I was able to interview SAIC`s executive vice president, Donald M. Kerr, who is also a former director at Los Alamos, and Steven Rockwood, a sector vice president at SAIC who was formerly a staff member at the Laboratory Because Agnew, Kerr, and Rockwood are all familiar with LANL, as well as with their respective companies, the interviews becam exercises In comparative analyses of technology transfer. In what follows, I have tried to summarize both the interviews and some of the research which attended them. It is the historian`s hope that by use of comparative institutional analyses, Laboratory administrators may learn something of value in directing their efforts toward the transfer of technology to private industry and other government agencies.

  16. CONSTRUCTION TECHNOLOGY OF UKRAINIAN NATIONAL HOUSING (PRYDNIPROVSK REGION IS AS AN EXAMPLE

    Directory of Open Access Journals (Sweden)

    EYVSEYEVA G. P.

    2016-03-01

    Building (with 20 figures into text. F.S. Dudko also describes in detail tehnology of ukrainian peasant houses construction as the safetiest and the cleanest houses of present. In the 70th of the XX century, works began to appear devoted to the study of nation architecture in Ukraine. The features of construction of one or another region, the types of peasant houses, their interior; construction of farm buildings, equipping of the yard were considered in this work. Among them A. Danyluk "Closed yards in Polesie" [6-7], A. Danyluk and M. Shpak "Traditional and new in boikivskyi housing construction" [8], M. Strunka "Ukrainian national housing of Mykolaivshchina" [16], M. Manurevich “Gagauz nation housing…”[14], Z. Petrova "Rural houses in the Carpathians" [15] and others [11; 13]. The purpose and the main directions of our research is to study the complex technology of the walls construction of the Ukrainians’national housing of Middle and Lower Naddniprianshchyny of Ukraine (of Prydniprovsk region of the end of XIX and middle of the XX century, as the Dnipropetrovsk region belongs to this historical and geographical, industrial and economic region.

  17. The contribution of home-based technology to older people's quality of life in extra care housing

    Directory of Open Access Journals (Sweden)

    Parker Stuart G

    2011-10-01

    Full Text Available Abstract Background British government policy for older people focuses on a vision of active ageing and independent living. In the face of diminishing personal capacities, the use of appropriate home-based technology (HBT devices could potentially meet a wide range of needs and consequently improve many aspects of older people's quality of life such as physical health, psychosocial well-being, social relationships, and their physical or living environment. This study aimed to examine the use of HBT devices and the correlation between use of such devices and quality of life among older people living in extra-care housing (ECH. Methods A structured questionnaire was administered for this study. Using purposive sampling 160 older people living in extra-care housing schemes were selected from 23 schemes in England. A face-to-face interview was conducted in each participant's living unit. In order to measure quality of life, the SEIQoL-Adapted and CASP-19 were used. Results Although most basic appliances and emergency call systems were used in the living units, communally provided facilities such as personal computers, washing machines, and assisted bathing equipment in the schemes were not well utilised. Multiple regression analysis adjusted for confounders including age, sex, marital status, living arrangement and mobility use indicated a coefficient of 1.17 with 95% CI (0.05, 2.29 and p = 0.04 [SEIQoL-Adapted] and 2.83 with 95% CI (1.17, 4.50 and p = 0.001 [CASP-19]. Conclusions The findings of the present study will be value to those who are developing new form of specialised housing for older people with functional limitations and, in particular, guiding investments in technological aids. The results of the present study also indicate that the home is an essential site for developing residential technologies.

  18. Urban "Housing Groups of Status" in Transition%转型时期城市"住房地位群体"

    Institute of Scientific and Technical Information of China (English)

    李强

    2009-01-01

    住房的最初功能是为人类提供一个遮风挡雨、驱寒保暖、安全稳定的居住场所.然而,在社会分层的社会里,住房就具有了地位符号和地位象征的含义.我国在市场化的房屋体制改革以后,房屋或房产已成为居民的重要财产,或成为资产,出租和出售房屋成为居民赢利的重要手段.于是,房屋所有者的经济地位含义就更为突出了,住房也成了转型时期城市"地位群体"的一种标志.%In a society with social stratification, housing serves as both a sign and a symbol of status. After the market-oriented housing reform, real estates become residents' essential properties or assets; as a result, renting or selling houses becomes an important means of profiting. Thus, prominence is given to the economic status of the owner of houses; and housing becomes a sign of urban "groups of status" in transi-tion.

  19. Wireless power transmission - Applications and technology status

    Science.gov (United States)

    Schupp, Bradford W.; Brown, Alan M.

    The history of wireless power transmission systems is reviewed and current and future applications and technology are discussed. Design constraints for terrestrial systems, airborne platforms, and space systems are presented.

  20. Phosphoric Acid Fuel Cell Technology Status

    Science.gov (United States)

    Simons, S. N.; King, R. B.; Prokopius, P. R.

    1981-01-01

    A review of the current phosphoric acid fuel cell system technology development efforts is presented both for multimegawatt systems for electric utility applications and for multikilowatt systems for on-site integrated energy system applications. Improving fuel cell performance, reducing cost, and increasing durability are the technology drivers at this time. Electrodes, matrices, intercell cooling, bipolar/separator plates, electrolyte management, and fuel selection are discussed.

  1. Gasification - Status and Technology; Foergasning - Status och teknik

    Energy Technology Data Exchange (ETDEWEB)

    Held, Joergen

    2011-07-15

    In this report gasification and gas cleaning techniques for biomass are treated. The main reason for gasifying biomass is to refine the fuel to make it suitable for efficient CHP production, as vehicle fuel or in industrial processes. The focus is on production of synthesis gas that can be used for production of vehicle fuel and for CHP production. Depending on application different types of gasifiers, gasification techniques and process parameters are of interest. Two gasification techniques have been identified as suitable for syngas generation, mainly due to the fact that they allow the production of a nitrogen free gas out of the gasifier; Indirect atmospheric gasification and Pressurized oxygen blown gasification For CHP production there are no restrictions on the gas composition in terms of nitrogen and here air-blown gasification is of interest as well. The main challenge when it comes to gas cleaning is related to sulphur and tars. There are different concepts and alternatives to handle sulphur and tars. Some of them is based on conventional techniques with well-proven components that are commercially available while others more advantageous solutions, still need further development. The report deals to a minor extent with the conversion of syngas to synthetic fuels. The ongoing research and development of gasification techniques is extensive, both on national and international level. Although many process concepts and components have been demonstrated, there is still no full-scale plant for the production of synthetic fuels based on biomass. Factors affecting the choice of technology are plant size, operating conditions, the possibility for process integration, access to feedstock, market aspects, incentives and economic instruments et cetera. Increased competition for biofuels will inevitably lead to higher raw material costs. This in turn means that the fuel chains with high efficiency, such as biomethane through gasification and methanation, are favored

  2. The effect of neighborhood socioeconomic status on education and health outcomes for children living in social housing.

    Science.gov (United States)

    Martens, Patricia J; Chateau, Daniel G; Burland, Elaine M J; Finlayson, Gregory S; Smith, Mark J; Taylor, Carole R; Brownell, Marni D; Nickel, Nathan C; Katz, Alan; Bolton, James M

    2014-11-01

    We explored differences in health and education outcomes between children living in social housing and not, and effects of social housing's neighborhood socioeconomic status. In this cohort study, we used the population-based repository of administrative data at the Manitoba Centre for Health Policy. We included children aged 0 to 19 years in Winnipeg, Manitoba, in fiscal years 2006-2007 to 2008-2009 (n = 13,238 social housing; n = 174,017 others). We examined 5 outcomes: age-2 complete immunization, a school-readiness measure, adolescent pregnancy (ages 15-19 years), grade-9 completion, and high-school completion. Logistic regression and generalized estimating equation modeling generated rates. We derived neighborhood income quintiles (Q1 lowest, Q5 highest) from average household income census data. Children in social housing fared worse than comparative children within each neighborhood income quintile. When we compared children in social housing by quintile, preschool indicators (immunization and school readiness) were similar, but adolescent outcomes (grade-9 and high-school completion, adolescent pregnancy) were better in Q3 to Q5. Children in social housing had poorer health and education outcomes than all others, but living in social housing in wealthier areas was associated with better adolescent outcomes.

  3. Improving the installation of renewable heating technology in UK social housing properties through user centred design.

    Science.gov (United States)

    Moore, Natalie; Haines, Victoria; Lilley, Debra

    2015-11-01

    Social housing organisations are increasingly installing renewable energy technologies, particularly for the provision of heating and hot water. To meet carbon reduction targets, uptake and installation must allow occupants to use the technology effectively. This paper describes research which investigated the service of installing heat pumps into UK social housing properties, from both landlords' and tenants' experiences. Adopting a user centred design approach, the research was in three phases: an exploration study to investigate landlords' and tenants' experiences of heat pump installation and use; refinement and development of the requirements for improved service delivery, primarily technology introduction and control; and the development and initial evaluation of an information leaflet as a key touchpoint in the service delivery. Recommendations for improved service delivery, to enable heat pumps to be accepted and used more effectively, are presented, as well as reflection on the process of applying user centred design in this context. In a relatively immature area of industry, installations to date have been heavily focused on technical aspects. This paper provides an insight into the human aspects of the service delivery of heat pumps in social housing, providing designers and social housing landlords with insight about how to improve the service.

  4. Fuel Cell Technology Status Analysis Project: Partnership Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    2017-03-13

    Fact sheet describing the National Renewable Energy Laboratory's (NREL's) Fuel Cell Technology Status Analysis Project. NREL is seeking fuel cell industry partners from the United States and abroad to participate in an objective and credible analysis of commercially available fuel cell products to benchmark the current state of the technology and support industry growth.

  5. The impact of social housing on the labour market status of the disabled.

    Science.gov (United States)

    Gregoir, Stéphane; Maury, Tristan-Pierre

    2013-09-01

    Disability may impact on employment through entitlement to social housing. Estimates of an original dynamic panel data model of disability, labour market and housing tenure transitions in England indicate that up to one-quarter of the lower employment probability of the disabled can be attributed to the effect of qualifying for social housing. Short-lived disabilities can result in long spells in social housing that reduce incentives to participate in the labour market. This suggests that authorities should reform the welfare system and the allocation of social housing to limit the persistent and unfavourable consequences of allocating social housing to the disabled.

  6. Nanofluid technology : current status and future research.

    Energy Technology Data Exchange (ETDEWEB)

    Choi, S. U.-S.

    1998-10-20

    Downscaling or miniaturization has been a recent major trend in modern science and technology. Engineers now fabricate microscale devices such as microchannel heat exchangers, and micropumps that are the size of dust specks. Further major advances would be obtained if the coolant flowing in the microchannels were to contain nanoscale particles to enhance heat transfer. Nanofluid technology will thus be an emerging and exciting technology of the 21st century. This paper gives a brief history of the Advanced Fluids Program at Argonne National Laboratory (ANL), discusses the concept of nanofluids, and provides an overview of the R and D program at ANL on the production, property characterization, and performance of nanofluids. It also describes examples of potential applications and benefits of nanofluids. Finally, future research on the fundamentals and applications of nanofluids is addressed.

  7. Fiber Optic Communications Technology. A Status Report.

    Science.gov (United States)

    Hull, Joseph A.

    Fiber optic communications (communications over very pure glass transmission channels of diameter comparable to a human hair) is an emerging technology which promises most improvements in communications capacity at reasonable cost. The fiber transmission system offers many desirable characteristics representing improvements over conventional…

  8. Extravehicular Activity Technology Development Status and Forecast

    Science.gov (United States)

    Chullen, Cinda; Westheimer, David T.

    2011-01-01

    The goal of NASA s current EVA technology effort is to further develop technologies that will be used to demonstrate a robust EVA system that has application for a variety of future missions including microgravity and surface EVA. Overall the objectives will be to reduce system mass, reduce consumables and maintenance, increase EVA hardware robustness and life, increase crew member efficiency and autonomy, and enable rapid vehicle egress and ingress. Over the past several years, NASA realized a tremendous increase in EVA system development as part of the Exploration Technology Development Program and the Constellation Program. The evident demand for efficient and reliable EVA technologies, particularly regenerable technologies was apparent under these former programs and will continue to be needed as future mission opportunities arise. The technological need for EVA in space has been realized over the last several decades by the Gemini, Apollo, Skylab, Space Shuttle, and the International Space Station (ISS) programs. EVAs were critical to the success of these programs. Now with the ISS extension to 2028 in conjunction with a current forecasted need of at least eight EVAs per year, the EVA hardware life and limited availability of the Extravehicular Mobility Units (EMUs) will eventually become a critical issue. The current EMU has successfully served EVA demands by performing critical operations to assemble the ISS and provide repairs of satellites such as the Hubble Space Telescope. However, as the life of ISS and the vision for future mission opportunities are realized, a new EVA systems capability will be needed and the current architectures and technologies under development offer significant improvements over the current flight systems. In addition to ISS, potential mission applications include EVAs for missions to Near Earth Objects (NEO), Phobos, or future surface missions. Surface missions could include either exploration of the Moon or Mars. Providing an

  9. Current Status on Biochip and Detection Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Hyun; Gwon, Hui Jeong

    2007-06-15

    The recent biotechnology technique has been miniaturized and it features a fusion of electricity, electronics and mechanics in the existing biology. As an example, biochip is a collection of miniaturized test sites (microarrays) arranged on a solid substrate that permits many tests to be performed at the same time in order to achieve higher throughput and speed. Like a computer chip that can perform millions of mathematical operations in a second, the biochip can perform thousands of biological reactions, such as decoding genes, in a few seconds. The biochip is being used in toxicological, protein, and biochemical research and it can also be used to rapidly detect chemical agents used in biological warfare so that defensive measures can be taken. These biochip technologies incorporate elements of microfluidics, micromachining, synthetic chemistry, separation technologies, and detection technologies of biological molecules. Basically, biochips can be divided into two types: microarray and lab-on-a-chip system. Microarrays use planted probes to catch and identify target biological molecules while lab-on-a-chips actively process loaded samples. The biochips are becoming more diverse and customers are appearing all over the world. The products from the biochip market are being used to help accelerating the research processes and capabilities of bio-pharmaceutical drug discovery and basic academic bioresearch. To fully take advantages of the attributes of biochip technologies such as miniaturization, parallelism, automation and integration, there are some problems to overcome. The major problem is to reduce the cost. Currently the prices of biochip products are too expensive to replace traditional products and processes. As a method to solve the problem, a radioisotope can be used as a detecting sensor by appling on the biochip, as it were, radio-biochip that will further bring the cost down. The originality using the radioisotope on the biochip technology will be able

  10. Effect of Marital Status on Living Arrangements and Housing Preferences of Retired Women Professionals.

    Science.gov (United States)

    Murakami, Elaine; Pynoos, Jon

    The Foundation to Assist California Teachers (FACT) is a non-profit organization which owns and operates retirement housing for teachers. To identify the demand for additional retirement housing facilities and explore "shared housing" alternatives, retired women teachers (N=2,740) in California completed a mail questionnaire which assessed: (1)…

  11. Effect of Marital Status on Living Arrangements and Housing Preferences of Retired Women Professionals.

    Science.gov (United States)

    Murakami, Elaine; Pynoos, Jon

    The Foundation to Assist California Teachers (FACT) is a non-profit organization which owns and operates retirement housing for teachers. To identify the demand for additional retirement housing facilities and explore "shared housing" alternatives, retired women teachers (N=2,740) in California completed a mail questionnaire which assessed: (1)…

  12. Status of solar sail technology within NASA

    Science.gov (United States)

    Johnson, Les; Young, Roy; Montgomery, Edward; Alhorn, Dean

    2011-12-01

    In the early 2000s, NASA made substantial progress in the development of solar sail propulsion systems for use in robotic science and exploration of the solar system. Two different 20-m solar sail systems were produced. NASA has successfully completed functional vacuum testing in their Glenn Research Center's Space Power Facility at Plum Brook Station, Ohio. The sails were designed and developed by Alliant Techsystems Space Systems and L'Garde, respectively. The sail systems consist of a central structure with four deployable booms that support each sail. These sail designs are robust enough for deployment in a one-atmosphere, one-gravity environment and are scalable to much larger solar sails - perhaps as large as 150 m on a side. Computation modeling and analytical simulations were performed in order to assess the scalability of the technology to the larger sizes that are required to implement the first generation of missions using solar sails. Furthermore, life and space environmental effects testing of sail and component materials was also conducted.NASA terminated funding for solar sails and other advanced space propulsion technologies shortly after these ground demonstrations were completed. In order to capitalize on the $30 M investment made in solar sail technology to that point, NASA Marshall Space Flight Center funded the NanoSail-D, a subscale solar sail system designed for possible small spacecraft applications. The NanoSail-D mission flew on board a Falcon-1 rocket, launched August 2, 2008. As a result of the failure of that rocket, the NanoSail-D was never successfully given the opportunity to achieve orbit. The NanoSail-D flight spare was flown in the Fall of 2010. This review paper summarizes NASA's investment in solar sail technology to date and discusses future opportunities.

  13. Solid Oxide Fuel Cells: Technology Status

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Prabhakar; Minh, Nguyen Q.

    2004-08-01

    In its most common configuration, solid oxide fuel cell (SOFC) uses an oxygen ion conducting ceramic electrolyte membrane, perovskite cathode and nickel cermet anode electrode. Cells operate in the 600-1000 C temperature range and utilize metallic or ceramic current collectors for cell-to-cell interconnection. Recent development in engineered electrode architectures, component materials chemistry, cell and stack designs and fabrication processes have led to significant improvement in the electrical performance and performance stability as well as reduction in the operating temperature of such cells. Large kW-size power generation systems have been designed and field demonstrated. This paper reviews the status of SOFC power generation systems with emphasis on cell and stack component materials, electrode reactions, materials reactions and corrosion processes

  14. Diamond detector technology: status and perspectives

    CERN Document Server

    Kagan, Harris; Artuso, M; Bachmair, F; Bäni, L; Bartosik, M; Beacham, J; Beck, H P; Bellini,, V; Belyaev, V; Bentele, B; Berdermann, E; Bergonzo, P; Bes, A; Brom, J-M; Bruzzi, M; Cerv, M; Chiodini, G; Chren, D; Cindro, V; Claus, G; Collot, J; Cumalat, J; Dabrowski, A; D'Alessandro, R; De Boer, W; Dehning, B; Dorfer, C; Dunser, M; Eremin, V; Eusebi, R; Forcolin, G; Forneris, J; Frais-Kölbl, H; Gan, K K; Gastal, M; Giroletti, C; Goffe, M; Goldstein, J; Golubev, A; Gorišek, A; Grigoriev, E; Grosse-Knetter, J; Grummer, A; Gui, B; Guthoff, M; Haughton, I; Hiti, B; Hits, D; Hoeferkamp, M; Hofmann, T; Hosslet, J; Hostachy, J-Y; Hügging, F; Hutton, C; Jansen, H; Janssen, J; Kanxheri, K; Kasieczka, G; Kass, R; Kassel, F; Kis, M; Kramberger, G; Kuleshov, S; Lacoste, A; Lagomarsino, S; Lo Giudice, A; Lukosi, E; Maazouzi, C; Mandic, I; Mathieu, C; Mcfadden, N; Menichelli, M; Mikuž, M; Morozzi, A; Moss, J; Mountain, R; Murphy, S; Muškinja, M; Oh, A; Oliviero, P; Passeri, D; Pernegger, H; Perrino, R; Picollo, F; Pomorski, M; Potenza, R; Quadt, A; Re, A; Reichmann, M; Riley, G; Roe, S; Sanz, D; Scaringella, M; Schaefer, D; Schmidt, C J; Schnetzer, S; Schreiner, T; Sciortino, S; Scorzoni, A; Seidel, S; Servoli, L; Sopko, B; Sopko, V; Spagnolo, S; Spanier, S; Stenson, K; Stone, R; Sutera, C; Taylor, Aaron; Traeger, M; Tromson, D; Trischuk, W; Tuve, C; Uplegger, L; Velthuis, J; Venturi, N; Vittone, E; Wagner, Stephen; Wallny, R; Wang, J C; Weingarten, J; Weiss, C; Wengler, T; Wermes, N; Yamouni, M; Zavrtanik, M

    2017-01-01

    The status of material development of poly-crystalline chemical vapor deposition (CVD) diamond is presented. We also present beam test results on the independence of signal size on incident par-ticle rate in charged particle detectors based on un-irradiated and irradiated poly-crystalline CVD diamond over a range of particle fluxes from 2 kHz/cm2 to 10 MHz/cm2. The pulse height of the sensors was measured with readout electronics with a peaking time of 6 ns. In addition the first beam test results from 3D detectors made with poly-crystalline CVD diamond are presented. Finally the first analysis of LHC data from the ATLAS Diamond Beam Monitor (DBM) which is based on pixelated poly-crystalline CVD diamond sensors bump-bonded to pixel readout elec-tronics is shown.

  15. Sensing technology current status and future trends

    CERN Document Server

    Mukhopadhyay, Subhas; Jayasundera, Krishanthi; Bhattacharyya, Nabarun

    2014-01-01

    This book is written for academic and industry professionals working in the field of sensing, instrumentation and related fields, and is positioned to give a snapshot of the current state of the art in sensing technology, particularly from the applied perspective.  The book is intended to give a broad overview of the latest developments, in addition to discussing the process through which researchers go through in order to develop sensors, or related systems, which will become more widespread in the future.  

  16. Current Status of VHTR Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    David Petti; Hans Gougar; Richard Wright; William Windes; Steve Herring; Richard Schultz; Paul Humrickhouse

    2010-10-01

    Abstract – High Temperature Gas-cooled Reactors (HTGRs) featuring particle fuel reached the stage of commercial deployment in the mid-1980s with the Fort St.Vrain and Thorium HochTemperatur Reaktor feeding electricity to the grids in the United States and West Germany, respectively. The technology was then adopted by Japan and China with the operation of the High Temperature Test Reactor in Oarai, Japan and the High Temperature Reactor (HTR-10) in China. Increasing the outlet temperature of the HTGR to even higher temperatures above 900°C will improve the thermodynamic efficiency of the system and enable application of a new class of gas reactor, the very high temperature reactor, to provide process heat, electricity, and hydrogen to chemical industries with the attendant benefits of improved energy security and reduced CO2 emissions. However, the increase in coolant outlet temperature presents a number of technical challenges associated with fuel, materials, power conversion, and analysis methods for the reactor and hydrogen production. The U.S. Department of Energy is sponsoring a broad program of research and development with a goal of addressing the technical challenges over a broad range of outlet temperatures as part of the Next Generation Nuclear Plant Project. This paper describes the research and development activities that are currently underway to realize the technologies needed for an HTGR that features outlet temperatures of 750 to 950°C.

  17. Status of SOFCo SOFC technology development

    Energy Technology Data Exchange (ETDEWEB)

    Privette, R.; Perna, M.A.; Kneidel, K. [SOFCo, Alliance, OH (United States)] [and others

    1996-12-31

    SOFCo, a Babcock & Wilcox/Ceramatec Research & Development Limited Partnership, is a collaborative research and development venture to develop technologies related to planar, solid-oxide fuel cells (SOFCs). SOFCo has successfully demonstrated a kW-class, solid-oxide fuel cell module operating on pipeline natural gas. The SOFC system design integrates the air preheater and the fuel processor with the fuel cell stacks into a compact test unit; this is the platform for multi-kW modules. The cells, made of tape-cast zirconia electrolyte and conventional electrode materials, exhibit excel lent stability in single-cell tests approaching 40,000 hours of operation. Stack tests using 10-cm and 15-cm cells with ceramic interconnects also show good performance and stability in tests for many thousands of hours.

  18. North House : developing intelligent building technology and user interface in energy independent domestic environments

    Energy Technology Data Exchange (ETDEWEB)

    Velikov, K. [Waterloo Univ., Cambridge, ON (Canada). School of Architecture; Bartram, L. [Simon Fraser Univ., Surrey, BC (Canada). School of Interactive Arts and Technology

    2009-07-01

    This paper reported on the construction of the North House, a prototype solar-powered dwelling developed by a Canadian team for the 2009 Solar Decathlon. The prototype aims to develop a strategy for solar powered residential design that addresses the issues of how to build and live in the demanding northern context, how to design buildings that are adaptive to climate extremes and how new technologies and alternative energies can be used to create a viable and sustainable architecture. The occupant-focused design is meant to empower the occupants with both knowledge and control so that they can make intelligent choices and transform their own habits to live more sustainably. The residential occupant needs to operate as both user and manager of a green dwelling, and therefore requires specific information as well as access to help the building work more efficiently. The domestic environment is different from a workplace environment and therefore requires a unique means of control, display and integration with user lifestyle. The Adaptive Living Interface System for North House is based on interactive technologies that help occupants to both control the systems of the house while providing feedback on the operation of the house. The objective is to support behavioural transformation for energy saving living patterns. Once the competition is over, the North House will be reinstalled in Canada to undergo a minimum of 2 years of post-occupancy evaluation (POE) and testing. Both quantitative and qualitative data will be collected on energy performance, user livability, comfort and user satisfaction. Results were be measured against performance simulation during the design phase and will be used to provide feedback on simulation software. 11 refs., 5 figs.

  19. Cellulosic ethanol. Potential, technology and development status

    Energy Technology Data Exchange (ETDEWEB)

    Rarbach, M. [Sued-Chemie AG, Muenchen (Germany)

    2012-07-01

    In times of rising oil prices and a growing energy demand, sustainable alternative energy sources are needed. Cellulosic ethanol is a sustainable biofuel, made from lignocellulosic feedstock such as agricultural residues (corn stover, cereal straw, bagasse) or dedicated energy crops. Its production is almost carbon neutral, doesn't compete with food or feed production and induces no land use changes. It constitutes a new energy source using an already existing renewable feedstock without needing any further production capacity and can thus play a major role on the way to more sustainability in transport and the chemical industry and reducing the dependence on the import of fossil resources. The potential for cellulosic ethanol is huge: In the US, the annual production of agricultural residues (cereal straw and corn stover) reached almost 384 million tons in 2009 and Brazil alone produced more than 670 million tons of sugar cane in 2009 yielding more than 100 million tons of bagasse (dry basis). And alone in the European Union, almost 300 million tons of crop straw are produced annually. The last years have seen success in the development and deployment in the field of cellulosic ethanol production. The main challenge thereby remains to demonstrate that the technology is economically feasible for the up-scaling to industrial scale. Clariant has developed the sunliquid {sup registered} process, a proprietary cellulosic ethanol technology that reaches highest greenhouse gas (GHG) emission savings while cutting production costs to a minimum. The sunliquid {sup registered} process for cellulosic ethanol matches the ambitious targets for economically and ecologically sustainable production and greenhouse gas reduction. It was developed using an integrated design concept. Highly optimized, feedstock and process specific biocatalysts and microorganisms ensure a highly efficient process with improved yields and feedstock-driven production costs. Integrated, on

  20. Client-Server Connection Status Monitoring Using Ajax Push Technology

    Science.gov (United States)

    Lamongie, Julien R.

    2008-01-01

    This paper describes how simple client-server connection status monitoring can be implemented using Ajax (Asynchronous JavaScript and XML), JSF (Java Server Faces) and ICEfaces technologies. This functionality is required for NASA LCS (Launch Control System) displays used in the firing room for the Constellation project. Two separate implementations based on two distinct approaches are detailed and analyzed.

  1. Status note on solar cell technology; Statusnotat om solcelleteknologi

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This status note briefly describes development and perspectives for solar cell technology internationally and nationally. The note will form part of the background for a coming proposal for a national solar cell strategy. The strategy will be prepared by the Danish Energy Authority in collaboration with the Ministry of Science, Technology and Innovation, Elkraft System, Eltra, representatives from the industry and others. The proposal is expected to give an overall picture of Danish R and D niches and opportunities within solar cell technology. (BA)

  2. Integrated Magnetic MEMS Relays: Status of the Technology

    Directory of Open Access Journals (Sweden)

    Giuseppe Schiavone

    2014-08-01

    Full Text Available The development and application of magnetic technologies employing microfabricated magnetic structures for the production of switching components has generated enormous interest in the scientific and industrial communities over the last decade. Magnetic actuation offers many benefits when compared to other schemes for microelectromechanical systems (MEMS, including the generation of forces that have higher magnitude and longer range. Magnetic actuation can be achieved using different excitation sources, which create challenges related to the integration with other technologies, such as CMOS (Complementary Metal Oxide Semiconductor, and the requirement to reduce power consumption. Novel designs and technologies are therefore sought to enable the use of magnetic switching architectures in integrated MEMS devices, without incurring excessive energy consumption. This article reviews the status of magnetic MEMS technology and presents devices recently developed by various research groups, with key focuses on integrability and effective power management, in addition to the ability to integrate the technology with other microelectronic fabrication processes.

  3. Application and development status of coal gasification technology in China

    Institute of Scientific and Technical Information of China (English)

    BU Xue-peng; XU Zhen-gang

    2004-01-01

    Introduced the application and development status of coal gasification technology in China. The most widely used coal gasification technology in China is the atmospheric fixed-bed gasifier, its total number is about 9 000. About 30 pressurized fixed-bed gasifiers are in operation, and more than 10 atmospheric fluidized-bed gasifiers were used. There are 13 Texaco entrained-flow bed gasifiers are under operation,10 Texaco and 11 Shell gasifiers that are being installed or imported. About 10 underground gasifiers are under running now. The present R&D of coal gasification technologies are to improve the operation and controlling level of fixed-bed gasification technology, and developing or demonstration of fluidized-bed and entrained-flow bed gasifiers.

  4. Status of molten carbonate fuel cell technology development

    Science.gov (United States)

    Parsons, E. L., Jr.; Williams, M. C.; George, T. J.

    The MCFC technology has been identified by the DOE as a promising product for commercialization. Development of the MCFC technology supports the National Energy Strategy. Review of the status of the MCFC technology indicates that the MCFC technology developers are making rapid and significant progress. Manufacturing facility development and extensive testing is occurring. Improvements in performance (power density), lower costs, improved packaging, and scale up to full height are planned. MCFC developers need to continue to be responsive to end-users in potential markets. It will be market demands for the correct product definition which will ultimately determine the character of MCFC power plants. There is a need for continued MCFC product improvement and multiple product development tests.

  5. Evaluation of kidney allograft status using novel ultrasonic technologies

    Directory of Open Access Journals (Sweden)

    Cheng Yang

    2015-07-01

    Full Text Available Early diagnosis of kidney allograft injury contributes to proper decisions regarding treatment strategy and promotes the long-term survival of both the recipients and the allografts. Although biopsy remains the gold standard, non-invasive methods of kidney allograft evaluation are required for clinical practice. Recently, novel ultrasonic technologies have been applied in the evaluation and diagnosis of kidney allograft status, including tissue elasticity quantification using acoustic radiation force impulse (ARFI and contrast-enhanced ultrasonography (CEUS. In this review, we discuss current opinions on the application of ARFI and CEUS for evaluating kidney allograft function and their possible influencing factors, advantages and limitations. We also compare these two technologies with other non-invasive diagnostic methods, including nuclear medicine and radiology. While the role of novel non-invasive ultrasonic technologies in the assessment of kidney allografts requires further investigation, the use of such technologies remains highly promising.

  6. Decontamination and decommissioning technology tree and the current status of the technologies

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Won Zin; Won, H.J.; Kim, G.N.; Lee, K.W.; Chol, W.K.; Jung, C.H.; Kim, C.J.; Kim, S.H.; Kwon, S.O.; Chung, C.M

    2001-03-01

    A technology tree diagram was developed on the basis of the necessary technologies applicable to the decontamination and decommissioning of nuclear facilities. The technology tree diagram is consist of 6 main areas such as characterization, decontamination, decommissioning and remote technology, radwaste management, site restoration, and decommissioning plan and engineering. Characterization is divided into 4 regions such as sampling and data collection, general characterization, chemical analysis and radiological analysis. Decontamination is also divided into 4 regions such as chemical decontamination, mechanical decontamination, the other decontamination technologies and new decontamination technologies. Decommissioning and remote technology area is divided into 4 regions such as cutting techniques, decommissioning technologies, new developing technologies and remote technologies. Radwaste management area is divided into 5 regions such as solid waste treatment, sludge treatment, liquid waste treatment, gas waste treatment and thermal treatment. Site restoration area is divided into 3 regions such as the evaluation of site contamination, soil decontamination and ground water decontamination. Finally, permission, decommissioning process, cost evaluation, quality assurance and the estimation of radionuclide inventory were mentioned in the decommissioning plan and engineering area. The estimated items for each technology are applicable domestic D and D facilities, D and D problem area and contamination/requirement, classification of D and D technology, similar technology, principle and overview of technology, status, science technology needs, implementation needs, reference and contact point.

  7. Employing mobile media technologies as a participatory planning tool in the suburban housing estate

    DEFF Research Database (Denmark)

    Andersson, Lasse; Knudsen, Anne-Marie Sanvig

    2013-01-01

    at Aalborg University, Denmark, an urban consultancy firm, and city planners in Vollsmose, Odense, Denmark in 2011-12. In this particular context, the practical challenge was to develop new facets to a master planning process at the Vollsmose housing estate, located in the outskirts of Odense. By evolving......As a response to the NSSB 2013 conference call ‘Suburbs-transformation and development”, we want to look at new methods for creating citizen participation in urban development processes by drawing on practical experiences gathered through a collaborative planning project between researchers...... and consulting firm employed mobile media technologies as a tool for creating new forms of citizen engagement. Based on the lessons learned from the research and development project we conclude by looking at what mobile media technologies afforded this planning process and what these experiences might add...

  8. Research status and application prospects of digital technology in orthopaedics.

    Science.gov (United States)

    Chen, Yan-xi; Zhang, Kun; Hao, Yi-ni; Hu, Yong-cheng

    2012-08-01

    In the last 10 years, basic and clinical research in orthopaedics has developed rapidly. Understanding of orthopaedic disorders involves not only routine diagnosis, but also the pursuit of highly efficient and accurate three-dimensional imaging of the intra- and extra-medullary distribution, form and structure of orthopaedic disorders, thus allowing scientific evaluation of the indications for surgery, drawing up of the best surgical plan, minimization of operative trauma and the earliest possible restoration of limb function. Meanwhile, the most important type of basic research, which was previously biomechanical research, has gradually become computational biomechanics based on in vitro cadaver experiments. This review aims to summarize the research status and application prospects of digital technology in orthopaedics, including virtual reality technology, reverse engineering and rapid prototyping techniques, computational biomechanics, computer navigation technology and management of digitization of medical records. © 2012 Tianjin Hospital and Wiley Publishing Asia Pty Ltd.

  9. Present status of refurbishment and irradiation technologies in JMTR

    Science.gov (United States)

    Inaba, Yoshitomo; Ishihara, Masahiro; Niimi, Motoji; Kawamura, Hiroshi

    2011-10-01

    The Japan Materials Testing Reactor (JMTR) of the Japan Atomic Energy Agency is a testing reactor for various neutron irradiation tests on nuclear fuels and materials, as well as for radioisotope production. The operation of JMTR stopped temporarily in August 2006 for refurbishment and improvement. The renewed JMTR will resume operation in Japanese fiscal year 2011. The renewal of aged reactor components, the preparation of new irradiation facilities, and the development of irradiation technologies have been carried out for the resumption of the new JMTR. The new JMTR with the new irradiation facilities and the irradiation technologies will be utilized for the research and development of fission and fusion reactor fuels and materials. This paper describes the present status of the refurbishment and the irradiation technologies focused on instrumentation such as the multi-paired thermocouple which is applicable to irradiation temperature control and a ceramic oxygen sensor in JMTR.

  10. Energy-saving Technology of Vent in Passive Solar Wall of Rural House of Severe Cold Region

    Institute of Scientific and Technical Information of China (English)

    Wei Ling; TianYu Zhao; Hong Jin; XiPeng Zhao

    2014-01-01

    This paper aims at solving the problems of low thermal collection rate, inconvenient maintenance, hindering indoor using during the application of passive solar technologies in rural houses in severe cold region. All these defects prevent the passive solar houses'further development. This paper chooses trombe wall, which has higher thermal efficiency of the passive solar house, as research object. The traditional vent is improved into a new type of ventilation device. This improvement overcomes the shortcoming, which traditional vent loses huge heat, and simplifies the construction of vent. Comparing with traditional trombe wall, the energy saving rate is 15�69%.

  11. Social status and housing factors affect reproductive performance of pregnant sows in groups.

    Science.gov (United States)

    Salak-Johnson, Janeen L

    2017-08-01

    Group-housing systems for pregnant sows are considered a welfare-promoting alternative to the individual stall. A major concern associated with pregnant sows housed in group pens is increased aggression at mixing and at feeding, which may cause chronic stress among some of the sows in the group due to low feed intake and social stress. Prolonged activation of the stress axis, based on elevated cortisol levels, may inhibit or impair reproductive success via disruption of the reproductive axis. Mixing sows into groups shortly after insemination evokes a stress response, which may affect fertilization and implantation due to sustained, elevated cortisol levels that disrupt reproductive processes. Yet, most studies reported minimal effects of group housing sows during pregnancy on reproduction or cortisol-related stress response. Differences between housing systems-in terms of group size, floor-space allowance, feeding system, and genetics-could account for these unexpected results. Indeed, interrupted feed intake, especially in early pregnancy, and sustained aggression in late pregnancy are two unfavorable social stresses that deserve special attention in order to achieve good reproductive performance. Unfortunately, most studies do not consider other factors, such as social rank and parity, which may interactively affect reproductive success and aggressive behavior of sows, especially in group-pen systems. © 2017 Wiley Periodicals, Inc.

  12. In-house R&D versus external technology acquisitions : small technology-based firms in the U.S. and Japan

    OpenAIRE

    Kurokawa, Susumu

    1992-01-01

    This research is an investigation of the relationship between in-house R&D and external technology acquisitions--e.g.,licensing,R&D contracts,collaborative R&D projects,joint ventures or mergers--based on the data derived from small technology-based firms in the U.S. and Japan. There are three major parts to this research.In Part 1. we discuss the advantages and disadvantages of in-house R&D versus external technology acquisitions,and examine key factors which affect "make-or-buy. decisions i...

  13. Status of the DOE Battery and Electrochemical Technology Program V

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, R.

    1985-06-01

    The program consists of two activities, Technology Base Research (TBR) managed by the Lawrence Berkeley Laboratory (LBL) and Exploratory Technology Development and Testing (EDT) managed by the Sandia National Laboratories (SNL). The status of the Battery Energy Storage Test (BEST) Facility is presented, including the status of the batteries to be tested. ECS program contributions to the advancement of the lead-acid battery and specific examples of technology transfer from this program are given. The advances during the period December 1982 to June 1984 in the characterization and performance of the lead-acid, iron/nickel-oxide, iron/air, aluminum/air, zinc/bromide, zinc/ferricyanide, and sodium/sulfur batteries and in fuel cells for transport are summarized. Novel techniques and the application of established techniques to the study of electrode processes, especially the electrode/electrolyte interface, are described. Research with the potential of leading to improved ceramic electrolytes and positive electrode container and current-collectors for the sodium/sulfur battery is presented. Advances in the electrocatalysis of the oxygen (air) electrode and the relationship of these advances to the iron/air and aluminum/air batteries and to the fuel cell are noted. The quest for new battery couples and battery materials is reviewed. New developments in the modeling of electrochemical cell and electrode performance with the approaches to test these models are reported.

  14. Status of the DOE Battery and Electrochemical Technology Program 5

    Science.gov (United States)

    Roberts, R.

    1985-06-01

    The program consists of two activities, Technology Base Research (TBR) managed by the Lawrence Berkeley Laboratory (LBL) and Exploratory Technology Development and Testing (EDT) managed by the Sandia National Laboratories (SNL). The status of the Battery Energy Storage Test (BEST) Facility is presented, including the status of the batteries to be tested. ECS program contributions to the advancement of the lead-acid battery and specific examples of technology transfer from this program are given. The advances during the period December 1982 to June 1984 in the characterization and performance of the lead-acid, iron/nickel-oxide, iron/air, aluminum/air, zinc/bromide, zinc/ferricyanide, and sodium/sulfur batteries and in fuel cells for transport are summarized. Novel techniques and the application of established techniques to the study of electrode processes, especially the electrode/electrolyte interface, are described. Research with the potential of leading to improved ceramic electrolytes and positive electrode container and current-collectors for the sodium/sulfur battery is presented. Advances in the electrocatalysis of the oxygen (air) electrode and the relationship of these advances to the iron/air and aluminum/air batteries and to the fuel cell are noted. The quest for new battery couples and battery materials is reviewed. New developments in the modeling of electrochemical cell and electrode performance with the approaches to test these models are reported.

  15. Status of the DOE Battery and Electrochemical Technology Program V

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, R.

    1985-06-01

    The program consists of two activities, Technology Base Research (TBR) managed by the Lawrence Berkeley Laboratory (LBL) and Exploratory Technology Development and Testing (EDT) managed by the Sandia National Laboratories (SNL). The status of the Battery Energy Storage Test (BEST) Facility is presented, including the status of the batteries to be tested. ECS program contributions to the advancement of the lead-acid battery and specific examples of technology transfer from this program are given. The advances during the period December 1982 to June 1984 in the characterization and performance of the lead-acid, iron/nickel-oxide, iron/air, aluminum/air, zinc/bromide, zinc/ferricyanide, and sodium/sulfur batteries and in fuel cells for transport are summarized. Novel techniques and the application of established techniques to the study of electrode processes, especially the electrode/electrolyte interface, are described. Research with the potential of leading to improved ceramic electrolytes and positive electrode container and current-collectors for the sodium/sulfur battery is presented. Advances in the electrocatalysis of the oxygen (air) electrode and the relationship of these advances to the iron/air and aluminum/air batteries and to the fuel cell are noted. The quest for new battery couples and battery materials is reviewed. New developments in the modeling of electrochemical cell and electrode performance with the approaches to test these models are reported.

  16. Choosing The Right Technology - Optimized Design Of Renewable Supply Systems For Residential Houses

    DEFF Research Database (Denmark)

    Milan, Christian; Bojesen, Carsten; Nielsen, Mads Pagh

    2012-01-01

    The use of renewable energy sources (RES) has continuously increased throughout the last decade. In the residential building sector the trend goes towards energy supply systems based on multiple RES. This is mainly due to political requirements, governmental subsidies and fuel price development....... These systems not only require an optimal design with respect to the installed capacities but also the right choice in combining the available technologies assuring a cost-effective solution. The aim of this paper is to present an optimization methodology for residential on-site energy supply systems based...... costs including system installation and operating expenses. The approach is applied to a case study of a residential single family house under Danish conditions. It delivers rapidly site-specific solutions and can easily be used as an extension for common building energy simulation software. In the case...

  17. Longitudinal Trajectories of Quality of Life and Depression by Housing Tenure Status.

    Science.gov (United States)

    Szabo, Agnes; Allen, Joanne; Alpass, Fiona; Stephens, Christine

    2017-03-22

    A large body of research has demonstrated the positive effects of home ownership on well-being and health outcomes. However, most previous studies have been cross-sectional. The present study aimed to understand the long-term impact of housing tenure on the psychological wellbeing of older people in New Zealand. Data were collected between 2010 and 2014. The 2010 sample (aged from 50-85 years) comprised 2,843 participants (55.4% female). Latent growth curve modeling was used to investigate trajectories of change for home owners and tenants in quality of life and depression symptoms. Analyses also examined the additional impact of demographic and socio-economic variables. Over time, quality of life increased, while depression symptoms decreased, for home owners. For tenants, lower levels of quality of life and higher levels of depression symptoms remained stable. Economic living standard, urban versus rural residence, length of residence, ethnicity, age, and household composition emerged as significant covariates. The psychological benefits of home ownership highlight the importance of secure and sustainable housing. Policies should be designed to ensure access to safe housing solutions for all older people.

  18. Status of radiation detector and neutron monitor technology

    CERN Document Server

    Kim, Y K; Ha, J H; Han, S H; Hong, S B; Hwang, I K; Lee, W G; Moon, B S; Park, S H; Song, M H

    2002-01-01

    In this report, we describe the current states of the radiation detection technology, detectors for industrial application, and neutron monitors. We also survey the new technologies being applied to this field. The method to detect radiation is the measurement of the observable secondary effect from the interaction between incident radiation and detector material, such as ionization, excitation, fluorescence, and chemical reaction. The radiation detectors can be categorized into gas detectors, scintillation detectors, and semiconductor detectors according to major effects and main applications. This report contains the current status and operational principles of these detectors. The application fields of radiation detectors are industrial measurement system, in-core neutron monitor, medical radiation diagnostic device, nondestructive inspection device, environmental radiation monitoring, cosmic-ray measurement, security system, fundamental science experiment, and radiation measurement standardization. The st...

  19. Innovative housing '93, proceedings. Volume 1: Technology innovations. L'habitation a la fine pointe '93, comptes rendus. Tome 1: Innovations technologiques

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    A conference was held to create an international forum for the promotion of more energy-efficient and environmentally responsible housing. Papers were presented on energy efficient housing technology, environmental impacts of energy efficient housing, electrical energy efficiency, advanced building envelopes, advanced mechanical systems, and indoor environmental control. Separate abstracts have been prepared for 38 papers from this compendium.

  20. Status of space science and technology - An Australian perspective

    Science.gov (United States)

    Carver, J. H.

    The ``Tyranny of Distance'' has had a profound influence on Australian history and reaction to it has been an important factor in determining national scientific and technological goals. Because of its size and geographical remoteness, Australia is one of the countries to have gained substantially from the applications of space technology particularly in the fields of communications, meteorology and remote sensing. Australia is the fifth largest investor in INTELSAT which carries a major fraction of the nation's overseas telecommunications. A domestic satellite system, AUSSAT, is being acquired to improve telecommunications within the country. Australia is heavily dependent on satellite data for routine meteorological forecasting. Data from the Australian Landsat Station are in strong demand, particularly for mineral exploration. In the field of space science, Australia is collaborating with Canada and the United States in feasibility studies for STARLAB, a free-flying UV-optical one metre telescope proposed for launch by the US Space Shuttle beginning in 1989. These scientific and technological programs in which Australia is participating are all dependent upon the space programs of other nations and in describing the status of space science and technology from an Australian perspective some comments will be made on particular aspects of the space programs of the United States and Japan.

  1. Review of production status of heavy steel castings and key technologies for their manufacture in China

    Institute of Scientific and Technical Information of China (English)

    Kang Jinwu; Huang Tianyou; Liu Baicheng

    2008-01-01

    This paper expatiates on domestic status of heavy steel casting production, with a special focus on hydraulic turbine castings for Three Gorges Project. In China, there is magnificent demand for heavy castings with the rapid growth of the national economy in recent years and the expected high growth in the coming 10 to 20 years. Some heavy and large castings such as mill housing and hydraulic turbine runner crown, blade and band for Three Gorges Project have been successfully made. However, the domestic production capability is still far from meeting the gigantic requirements. The domestic capability still lags behind the world class level, and a lot of heavy castings still depend on import. The paper also gives a particular introduction of the key technologies in the manufacturing of heavy steel castings like metal melting, foundry technology, heat treatment technology and numerical simulation technique, etc.In addition, several case studies on the application of numerical simulation in the production of heavy steel castings are presented.

  2. Review of production status of heavy steel castings and key technologies for their manufacture in China

    Directory of Open Access Journals (Sweden)

    Liu Baicheng

    2008-02-01

    Full Text Available This paper expatiates on domestic status of heavy steel casting production, with a special focus on hydraulic turbine castings for Three Gorges Project. In China, there is magnificent demand for heavy castings with the rapid growth of the national economy in recent years and the expected high growth in the coming 10 to 20 years. Some heavy and large castings such as mill housing and hydraulic turbine runner crown, blade and band for Three Gorges Project have been successfully made. However, the domestic production capability is still far from meeting the gigantic requirements. The domestic capability still lags behind the world class level, and a lot of heavy castings still depend on import. The paper also gives a particular introduction of the key technologies in the manufacturing of heavy steel castings like metal melting, foundry technology, heat treatment technology and numerical simulation technique, etc. In addition, several case studies on the application of numerical simulation in the production of heavy steel castings are presented.

  3. The adoption of appropriate technology in public housing and informal settlement upgrades in South Africa

    CSIR Research Space (South Africa)

    Rajab, Azra

    2016-07-01

    Full Text Available There exists a large number of housing delivery programmes being rolled out to impoverished communities across South Africa. These national programmes provide subsidised, serviced housing units with the aim of improving the quality of life for those...

  4. Status of Propulsion Technology Development Under the NASA In-Space Propulsion Technology Program

    Science.gov (United States)

    Anderson, David; Kamhawi, Hani; Patterson, Mike; Pencil, Eric; Pinero, Luis; Falck, Robert; Dankanich, John

    2014-01-01

    Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing and delivering in-space propulsion technologies for NASA's Science Mission Directorate (SMD). These in-space propulsion technologies are applicable, and potentially enabling for future NASA Discovery, New Frontiers, Flagship and sample return missions currently under consideration. The ISPT program is currently developing technology in three areas that include Propulsion System Technologies, Entry Vehicle Technologies, and Systems/Mission Analysis. ISPT's propulsion technologies include: 1) the 0.6-7 kW NASA's Evolutionary Xenon Thruster (NEXT) gridded ion propulsion system; 2) a 0.3-3.9kW Halleffect electric propulsion (HEP) system for low cost and sample return missions; 3) the Xenon Flow Control Module (XFCM); 4) ultra-lightweight propellant tank technologies (ULTT); and 5) propulsion technologies for a Mars Ascent Vehicle (MAV). The NEXT Long Duration Test (LDT) recently exceeded 50,000 hours of operation and 900 kg throughput, corresponding to 34.8 MN-s of total impulse delivered. The HEP system is composed of the High Voltage Hall Accelerator (HIVHAC) thruster, a power processing unit (PPU), and the XFCM. NEXT and the HIVHAC are throttle-able electric propulsion systems for planetary science missions. The XFCM and ULTT are two component technologies which being developed with nearer-term flight infusion in mind. Several of the ISPT technologies are related to sample return missions needs: MAV propulsion and electric propulsion. And finally, one focus of the Systems/Mission Analysis area is developing tools that aid the application or operation of these technologies on wide variety of mission concepts. This paper provides a brief overview of the ISPT program, describing the development status and technology infusion readiness.

  5. Robotic technology in surgery: current status in 2008.

    Science.gov (United States)

    Murphy, Declan G; Hall, Rohan; Tong, Raymond; Goel, Rajiv; Costello, Anthony J

    2008-12-01

    There is increasing patient and surgeon interest in robotic-assisted surgery, particularly with the proliferation of da Vinci surgical systems (Intuitive Surgical, Sunnyvale, CA, USA) throughout the world. There is much debate over the usefulness and cost-effectiveness of these systems. The currently available robotic surgical technology is described. Published data relating to the da Vinci system are reviewed and the current status of surgical robotics within Australia and New Zealand is assessed. The first da Vinci system in Australia and New Zealand was installed in 2003. Four systems had been installed by 2006 and seven systems are currently in use. Most of these are based in private hospitals. Technical advantages of this system include 3-D vision, enhanced dexterity and improved ergonomics when compared with standard laparoscopic surgery. Most procedures currently carried out are urological, with cardiac, gynaecological and general surgeons also using this system. The number of patients undergoing robotic-assisted surgery in Australia and New Zealand has increased fivefold in the past 4 years. The most common procedure carried out is robotic-assisted laparoscopic radical prostatectomy. Published data suggest that robotic-assisted surgery is feasible and safe although the installation and recurring costs remain high. There is increasing acceptance of robotic-assisted surgery, especially for urological procedures. The da Vinci surgical system is becoming more widely available in Australia and New Zealand. Other surgical specialties will probably use this technology. Significant costs are associated with robotic technology and it is not yet widely available to public patients.

  6. Present Status and Internationalization Prospect of China Float Glass Technology

    Directory of Open Access Journals (Sweden)

    Peng, Shou

    2008-04-01

    Full Text Available This paper gives a brief account on the development course of China float glass technology accompanied by a detailed introduction of the current status of China float glass technology, covering the respects of production line scale, product variety, product quality, technology & equipment level, etc., and makes prospects for internationalized development trend of China flat glass industry.

    Este trabajo presenta una breve recopilación de los desarrollos en curso de la tecnología de vidrio flotado en China, acompañada por una introducción detallada de la situación de la industria y tecnología del vidrio plano en este país. Se cubren los aspectos de líneas de producción, variedad de productos, calidad de los productos, tecnología y nivel de equipamiento, etc. y se hacen algunas predicciones sobre las tendencias de desarrollo e internacionalización de la industria china de vidrio plano.

  7. Current Status on Resource and Recycling Technology for Rare Earths

    Science.gov (United States)

    Takeda, Osamu; Okabe, Toru H.

    2014-06-01

    The development of recycling technologies for rare earths is essential for resource security and supply stability because high-quality rare earth mines are concentrated in China and the demand for rare earth metals such as neodymium and dysprosium, used as raw materials in permanent magnets (neodymium magnet), is expected to increase rapidly in the near future. It is also important to establish a recycling-based society from the perspective of the conservation of finite and valuable mineral resources and the reduction of the environmental load associated with mining and smelting. In this article, the current status of rare earth resource as well as that of recycling technology for the magnets is reviewed. The importance of establishing an efficient recycling process for rare earths is discussed from the characteristics of supply chain of rare earths, and the technological bases of the recycling processes for the magnet are introduced. Further, some fundamental researches on the development of new recycling processes based on pyrometallurgical process are introduced, and the features of the recycling processes are evaluated.

  8. Indian fast reactor technology: Current status and future programme

    Indian Academy of Sciences (India)

    S C Chetal; P Chellapandi

    2013-10-01

    The paper brings out the advantages of fast breeder reactor and importance of developing closed nuclear fuel cycle for the large scale energy production, which is followed by its salient safety features. Further, the current status and future strategy of the fast reactor programme since the inception through 40 MWt/13 MWe Fast Breeder Test Reactor (FBTR), is highlighted. The challenges and achievements in science and technology of FBRs focusing on safety are described with the particular reference to 500 MWe capacity Prototype Fast Breeder Reactor (PFBR), being commissioned at Kalpakkam. Roadmap with comprehensive R&D for the large scale deployment of Sodium Cooled Fast Reactor (SFRs) and timely introduction of metallic fuel reactors with emphasis on breeding gain and enhanced safety are being brought out in this paper.

  9. Dish concentrators for solar thermal energy - Status and technology development

    Science.gov (United States)

    Jaffe, L. D.

    1981-01-01

    Comparisons are presented of point-focusing, or 'dish' solar concentrator system features, development status, and performance levels demonstrated to date. In addition to the requirements of good optical efficiency and high geometric concentration ratios, the most important future consideration in solar thermal energy dish concentrator design will be the reduction of installed and lifetime costs, as well as the materials and labor costs of production. It is determined that technology development initiatives are needed in such areas as optical materials, design wind speeds and wind loads, structural configuration and materials resistance to prolonged exposure, and the maintenance of optical surfaces. The testing of complete concentrator systems, with energy-converting receivers and controls, is also necessary. Both reflector and Fresnel lens concentrator systems are considered.

  10. Current status and potential perspectives in classical radiotherapy technology

    Directory of Open Access Journals (Sweden)

    Dabić-Stanković Kata M.

    2004-01-01

    Full Text Available Introduction and potentials of classical radiotherapy After purchase of radiotherapy equipment in 2003, classic radiation therapy in Serbia will reach the highest world level. In order to define the highest standards in radiation technology, we analyzed the current status and potential perspectives of radiation therapy. Technological levels of radiotherapy in developed countries An analysis of present situation in the USA, assumed as the most developed in the world, was done. Available data, collected in the last 3 years (equipment assortment, therapy modalities, workload and manpower for 284 radiotherapy centers, out of potential 2050, were analyzed. Results were presented as crude percentage and mached to point current status. Results of analysis and discussion The analysis showed that CLINAC accelerators are the most popular (82.7%, as well as, ADAC (43.7% and Focus (CMS (27.4% systems for therapy planning. Movement towards virtual simulation is evident (59.3%, although classic ”simulation” is not fully eliminated from the radiotherapy chain. The most popular brachytherapy afterloader is Microselectron HDR (71%. About 64.4% centers use IMPAC communication/verification/record system that seems more open than Varis. All centers practice modern radiotherapy modalities and techniques (CFRT, IMRT, SRS/SRT, TBI, IORT, IVBHRT, HDR BHRT, etc.. CT and MRI availability is out of question, but PET is available in 3% of centers, however this percentage is rapidly growing. Up to 350 new patients per year are treated by one accelerator (about 35 pts. a day. Centers are relatively small and utilize 2-3 accelerators on average. Average FTE staffing norm is 4 radiation oncologists, 2-3 medical radiotherapy physicists, about 3 certified medical dosimetrists and about 6 radiotherapy technologists. Technological aspects and conclusion In the past 5 years relative stagnation in classic radiotherapy has been observed. In spite of substantial investments in

  11. Reactive dye house wastewater treatment. Use of hybrid technology: Membrane, sonication followed by wet oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Dhale, A.D.; Mahajani, V.V. [Univ. of Mumbai (India)

    1999-05-01

    To address problems associated with treatment of an aqueous waste stream from a reactive dye house, a model dye, turquoise blue CI25, was studied. A hybrid technology, membrane separation followed by sonication and wet oxidation, has been demonstrated to treat the wastewater for reuse and discharge. Experiments were first performed with the reactive dye solution in water. A nanofiltration membrane (MPT 30) was found to be suitable to concentrate the dye. The concentrate was then treated with a wet oxidation process. Kinetics studies were performed with and without catalyst, in the temperature range of 170--215 C. The color destruction achieved was > 99%. After process parameters were fixed, studies were conducted with the actual dye waste stream. The actual waste stream was found to be refractory for wet oxidation under the above conditions. Sonication of the concentrate obtained after membrane filtration, in the presence of CuSO{sub 4}, made the waste stream amenable to wet oxidation. Sonication followed by wet oxidation was found to be more effective at near neutral conditions as compared to basic conditions.

  12. Health Status of Male Adult Wistar Rats from Two Experimental Animal Houses of UFMG: Leukocyte Counts, Feces and Lung Histological Exams

    Directory of Open Access Journals (Sweden)

    Andrade Bruno Horta

    2002-01-01

    Full Text Available A study was conducted to compare health status of male adult Wistar rats from two Experimental Animal Houses of UFMG with literature data of SPF (free from specific pathogens and conventional rats. The animals were divided into two groups: Group I (n=10, rats from the experimental animal houses of FAFICH and Group II (n=10 from ICB and following aspects were studied: a evident clinical signs (behavior modification, hair loss (alopecia, b leukocyte counts, c feces exam and d histological study of the lungs. The rats did not show clinical signs. However, when compared with SPF and conventional rats, both the groups showed a significant increase (p<0,05 of leukocyte count. On feces exam we detected some parasites and on lung histological exam we observed fungus (Group I and bacteria (Group II. These results showed that the health status of the rats was not satisfactory and required improvements in the conditions of the animal houses.

  13. [Comparison of the nutritional status of residents in shared-housing arrangements and nursing homes: a secondary data analysis].

    Science.gov (United States)

    Meyer, Saskia; Fleischer-Schlechtiger, Nadine; Gräske, Johannes; Worch, Andreas; Wolf-Ostermann, Karin

    2014-04-01

    Malnutrition and weight loss are special challenges in the care of older people particularly with dementia. In Germany, shared-housing arrangements (SHA) for older care-dependent people evolved in the last years. SHA are an alternative to traditional nursing homes. Despite of the increase of SHA in number it remains unclear if this setting is especially beneficial in terms of (mal-)nutrition. Therefore the nutritional status of older people with and without dementia living in SHA and traditional nursing homes will be compared. From 2010 to 2011 data was collected in various SHA in Berlin and in a nursing home in Schkeuditz/Saxony using standardized face-to-face interviews with nurses. In addition to socio-demographic data the nutritional status using the Mini Nutritional Assessment (MNA) and the cognitive capacities usingthe Mini Mental State Examination (MMSE) were examined. In the secondary data analysis, data from 129 residents (60 residents from 29 SHA and 69 from a nursing home) were included in the analysis. The residents of both settings were mostly female (76.7%) and on average 80.4 years old and with a moderate to severe cognitive decline (MMSE: 13.2). The average MNA score of residents from both settings is 19.7, indicating a risk for malnutrition. Residents of SHA have a significantly higher (and therefore better) MNA score (21.2) on average than residents in the nursing home (18.3; t-Test pnutritional status than residents in the nursing home even when taking into account differences concerning age, gender, care dependency, a medical diagnosis of dementia and the MMSE. Further studies should evaluate the concept of food intake in both settings and evaluate differences.

  14. LNG - Status in Denmark. Technology and potential. Project report

    Energy Technology Data Exchange (ETDEWEB)

    Naeslund, M.

    2012-05-15

    The interest for LNG both on a small and a large scale is increasing worldwide. The experiences and knowledge on LNG is limited in Denmark. The Danish gas companies' Technical Management Group (TCG) has asked for a status report including a technology description and an evaluation of the potential in Denmark. A survey of primarily small-scale LNG technology is done in the report. The focus is motivated by the new areas of gas utilisation that become possible with small-scale LNG. Small-scale LNG in this study is defined as LNG stored and used at the application or in an isolated gas grid. The small-scale use of LNG has today an almost negligible share of the total LNG trade but offers interesting new applications for gas utilisation. LNG on a small scale can be used primarily as: 1) Ship fuel. 2) Truck fuel (heavy duty long distance). 3) Individual users not connected to the natural gas grid. 4) Backup for upgraded biogas to individual users and vehicle fleets. 5) Security of supply or supply enhancement of heavily loaded parts of the gas grid. 6) Small-scale storage and/or peak shaving. All but the first topics are natural uses for the current Danish gas distributors. LNG as ship fuel may engage other specialized LNG companies. The report contains a technical description of the parts in primarily small-scale LNG handling and operation. Liquefaction, transport, storage, engine technologies, gas quality and safety aspects related to LNG are covered. There seem to be two more or less separate paths for LNG in Denmark, onshore and off-shore use. These are not, apparently, sharing their experiences and knowledge. Rules and regulations are also different which may create some problems in the interface, for example ship bunkering. Further studies are suggested in the area of gas quality and engine technologies and adaptation of foreign guidelines for small-scale installations to Danish conditions. These guidelines ought to be based on international standards and

  15. New Whole-House Solutions Case Study: Lancaster County Career and Technology Center Green Home 3 - Mount Joy, Pennsylvania

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-12-01

    This case study describes a unique vocational program at Lancaster County Career Technology Center in Mount Joy, PA, where high school students are gaining hands-on construction experience in building high performance homes with help from Building America team, Home Innovation Research Labs. This collaboration resulted in the Green Home 3, the third in a series of high performance homes for Apprentice Green. As one of LCCTC’s key educational strategies for gaining practical experience, students are involved in building real houses that incorporate state-of-the-art energy efficiency and green technologies. With two homes already completed, the Green Home 3 achieved a 44% whole-house energy savings over the Building America New Construction B10 Benchmark, DOE Zero Energy Ready Home (formerly Challenge Home) certification, and National Green Building Standard Gold-level certification.

  16. The status of assisted reproductive technology in Korea in 2012.

    Science.gov (United States)

    Lee, Gyoung Hoon; Song, Hyun Jin; Choi, Young Min; Han, Hyuck Dong

    2017-03-01

    This study was designed to report the status of assisted reproductive technology (ART) therapy in South Korea between January 1, 2012 and December 31, 2012. A localized online survey, originally developed by the International Committee Monitoring Assisted Reproductive Technologies, was first launched and provided to all available ART centers via email in 2015. Fresh embryo transfer (FET) cases were categorized as standard in vitro fertilization, intracytoplasmic sperm injection (ICSI), or half-ICSI. Thawed embryo transfer (TET) and other related procedures, including surgical sperm retrieval, were surveyed. Data from 33,956 ovum pick-up procedures were provided by 75 clinics in 2012. Of the 33,088 cycles in which ovums were retrieved, a complete transfer was performed in 90.5% (29,932 cycles). In addition, 10,079 FET cycles were confirmed to have resulted in clinical pregnancy, representing a pregnancy rate of 30.5% per ovum pick-up and 33.7% per ET. The most common number of embryos transferred in FET was 2 (41.6%), followed by 3 (34.0%), and non-elective single ETs (10.0%). Of the 10,404 TET cycles in which transfer was completed, 3,760 clinical pregnancies (36.1%) were confirmed by ultrasonography. The overall clinical pregnancy rate for FET and TET cycles in 2012 was higher than in 2011 (33.7% vs. 33.2% and 36.1% vs. 31.1%, respectively). The most common number of embryos transferred in FET cycles was 2, unlike in 2011.

  17. Current status of assisted reproductive technology in Korea, 2010.

    Science.gov (United States)

    Lee, Gyoung Hoon; Song, Hyun Jin; Lee, Kyu Sup; Choi, Young Min

    2015-03-01

    Great advances have been made in the field of assisted reproductive technology (ART) since the first in vitro fertilization (IVF) baby was born in Korea. This study was designed to report on the current status of ART therapy in South Korea between January 1 and December 31 of 2010. A revised survey, originally developed by the International Committee Monitoring Assisted Reproductive Technologies, was sent to all available ART centers via email in 2013. Fresh embryo transfer (FET) cases were categorized into standard IVF or intracytoplasmic sperm injections. These cases, the thawing embryo transfer (TET) cases, and other related procedures were surveyed. Data from 30,785 ART procedures were provided by 78 clinics. Of the 28,200 cycles in which oocytes were retrieved, 92.2% of these cycles were completely transferred. In addition, 8,075 cycles were confirmed to be clinical pregnancies in the FET cycles, which represent a pregnancy rate of 28.6% per oocyte pick-up and 31.1% per embryo transfer. The most common number of embryos transferred in the FET was three embryos (37.3%) followed by two embryos (36.3%) and one embryo (14.0%). Of the 6,648 TET cycles transferred, 2,356 clinical pregnancies were confirmed by ultrasonography. The most common number of embryos in the TET group was two embryos (43.4%) followed by three embryos (25.4%) and one embryo (18.9%). The clinical pregnancy rate per transfer in the FET cycles was similar in 2009 and 2010. Among the FET cycles where one or two embryos were transferred, the clinical pregnancy rate per transfer slightly increased from 2009 (28.7%) to 2010 (32.9%).

  18. Wind turbines: current status, obstacles, trends and technologies

    Science.gov (United States)

    Konstantinidis, E. I.; Botsaris, P. N.

    2016-11-01

    The last decade the installation of wind farms around the world is spreading rapidly and wind energy has become a significant factor for promoting sustainable development. The scope of the present study is to indicate the present status of global wind power expansion as well as the current state of the art in the field of wind turbine technology. The RAM (reliability/availability/maintenance) section is also examined and the Levelized Cost of Energy for onshore/ offshore electricity production is presented. Negative consequences that go with the rapid expansion of wind power like accidents, environmental effects, etc. are highlighted. Especially visual impact to the landscape and noise pollution are some factors that provoke social reactions. Moreover, the complicated and long permitted process of a wind power plant, the high capital cost of the investment and the grid instability due to the intermittent nature of wind, are also significant obstacles in the development of the wind energy production. The current trends in the field of research and development of onshore and offshore wind power production are analyzed. Finally the present study is trying to achieve an estimation of where the wind industry targets for the years to come.

  19. Technological aspects of the construction of underground parking house in the center of

    OpenAIRE

    Jerič, Uroš

    2010-01-01

    In densely populated urban areas there is a lack of parking spaces for urban residents and commuters. That is why underground parking houses are being made. They allow parking of numerous vehicles and are almost invisible on the surface. The purpose of this Graduation Thesis is to present the construction of the parking house at Kongresni trg in Ljubljana. The first part describes the protection of excavation pit and construction of reinforced concrete diaphragm wall. Based on ...

  20. Current status of assisted reproductive technology in Korea, 2011.

    Science.gov (United States)

    Lee, Gyoung Hoon; Song, Hyun Jin; Lee, Kyu Sup; Choi, Young Min

    2016-03-01

    The number of assisted reproductive technology (ART) clinics, ART cycles, clinical pregnancy rate (CPR), and number of newborns conceived using ART have steadily increased in South Korea. This aim of this study was to describe the status of ART in South Korea between January 1 and December 31, 2011. A localized online survey was created and sent to all available ART centers via email in 2015. Fresh embryo transfer (FET) cases were categorized depending on whether standard in vitro fertilization, intracytoplasmic sperm injection (ICSI), or half-ICSI procedures were used. Thawed embryo transfer (TET) and other related procedures were surveyed. Data from 36,990 ART procedures were provided by 74 clinics. Of the 30,410 cycles in which oocytes were retrieved, a complete transfer was performed in 91.0% (n=27,683). In addition, 9,197 cycles were confirmed to be clinical pregnancies in the FET cycles, representing a pregnancy rate of 30.2% per oocyte pick-up and 33.2% per ET. The most common number of embryos transferred in the FET procedures was three (38.1%), followed by two (34.7%) and one (14.3%). Of the 8,826 TET cycles, 3,137 clinical pregnancies (31.1%) were confirmed by ultrasonography. While the overall clinical pregnancy rate for the TET cycles performed was lower than the rate reported in 2010 (31.1% vs. 35.4%), the overall CPR for the FET cycles was higher than in 2010 (33.2% in 2011 and 32.9% in 2010). The most common number of embryos transferred in FET cycles was three, as was the case in 2010.

  1. Proposals for management and participatory activities with earth technology in housing of poor urban sectors. Buenos Aires-Mar Del Plata, Argentina

    OpenAIRE

    Rotondaro, Rodolfo; CONICET; Cacopardo, Fernando; CONICET

    2014-01-01

    This article shows partial results concerning a scientific and technological research focused in the generation andmanagement of processes and participatory practices of construction technologies for housing in poor urban sectors.The main objective is to develop alternatives for new building materials, elements and building systems in thecontext of self-made houses and surroundings in the periphery neighborhoods of Buenos Aires and Mar del Plata.Local self-builders and families, neighborhood ...

  2. Efficacy of innovative technologies in subsidised housing in South Africa: A case study

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2010-09-01

    Full Text Available -income house plan as approved by the National Home Builders Registration Council (NHBRC). This is a 40 square meter housing unit comprising two bedrooms, a living area including a kitchenette, and a bathroom having a shower, a basin and a water closet (wc... internally and externally, and a roof assembly consisting of timber beams with a cranked steel roof sheet. Provision was to be made for cold water supply only, and for a single electrical board comprising a light and two plug points. No ceilings, roof...

  3. A Quantitative Examination of the Educational Technology Characteristics of Ohio Schools and Their Blue Ribbon Status

    Science.gov (United States)

    Goon, Dean A.

    2012-01-01

    The purpose of this study was to analyze data from Ohio schools and the frequency of use of educational technology, a teacher's comfort level using technology, and a teacher's beliefs about the effect of educational technology on teaching and learning based upon the school's Blue Ribbon award status. The study used an ex-post facto, quantitative…

  4. 75 FR 39664 - Grant of Authority For Subzone Status Materials Science Technology, Inc. (Specialty Elastomers...

    Science.gov (United States)

    2010-07-12

    ... Foreign-Trade Zones Board Grant of Authority For Subzone Status Materials Science Technology, Inc... Materials Science Technology, Inc., located in Conroe, Texas, (FTZ Docket 46-2009, filed October 27, 2009... Science Technology, Inc., located in Conroe, Texas (Subzone 265C), as described in the application...

  5. The Effects of Two Different Cleaning and Disinfection Programs on Broiler Performance and Microbiological Status of Broiler Houses

    Directory of Open Access Journals (Sweden)

    MFC Burbarelli

    2015-12-01

    Full Text Available ABSTRACT The objective of this study was to investigate the influence of two cleaning and disinfection programs on broiler performance and on the microbiological status of the facilities. This trial was an observational study of comparative character. Two experiments were conducted, with 960 birds each. Both experiments were carried out in a positive-pressure broiler house. Broilers were distributed in pens equipped with a bell drinker and a tube feeder each. In the first experiment, new wood shavings were used as litter material, and in the second, reused wood shavings were used. Two treatments with16 replicates of 30 birds each were evaluated. The regular treatment consisted of dry and wet organic matter removal, followed by washing. The European treatment consisted of dry organic matter removal, humidification, washing with water under high pressure, detergent application, rinsing, and application of two combined disinfectants: glutaraldehyde 250g/L + formaldehyde 185g/L; p-chlor-m-cresol 210 g/L. Biosecurity measures were adopted during daily management tasks to prevent cross contamination between treatments. The effectiveness of the treatments was evaluated by microbiological analysis performed before and after treatment applications, as well as by broiler performance results. Live performance results were similar between both treatments when broilers were reared on new litter. When reused word-shavings were used as litter material, the European treatment promoted better broiler performance. The European treatment was more effective than the regular treatment in reducing total microbial counts in the facilities when reused wood shavings were used as litter material, and positively influenced broiler performance.

  6. Status of the Third Miniature Sensor Technology Integration Satellite Mission

    OpenAIRE

    Barnhart, David; Hurtz, Rick; McClelland, Jim; Cellarius, Mark; Meyers, AI

    1994-01-01

    The MSTI-3 satellite is the third in a series established to test, in realistic scenarios, miniature spacecraft and sensor technologies for missile detection and tracking on low-cost, low-earth orbit technology demonstration satellites. Cooperative demonstrations are planned to combine MSTI-provided target track file information, with interceptor technology tests, to fully demonstrate technologies associated with theater missile defense (TMO) targeting. The program is sponsored by the Ballist...

  7. The application of BIM as collaborative design technology for collective self-organised housing

    NARCIS (Netherlands)

    Damen, T.; Sebastian, R.; Macdonald, M.; Soetanto, D.; Hartmann, T.; Giulio, di R.; Bonsma, P.; Luig, K.

    2015-01-01

    Collective Self-Organised (CSO) housing projects are an emerging trend in Europe. In these projects communities engage in co-design throughout the process. Little knowledge exists that can support CSOs with the process of managing their projects by using state-of-the-art building information (BI) te

  8. The application of BIM as collaborative design technology for collective self-organised housing

    NARCIS (Netherlands)

    Damen, T.; Sebastian, R.; Macdonald, M.; Soetanto, D.; Hartmann, Timo; Di Giulio, R.; Bonsma, P.; Luig, K.

    2015-01-01

    Collective Self-Organised (CSO) housing projects are an emerging trend in Europe. In these projects communities engage in co-design throughout the process. Little knowledge exists that can support CSOs with the process of managing their projects by using state-of-the-art building information (BI) te

  9. The application of BIM as collaborative design technology for collective self-organised housing

    NARCIS (Netherlands)

    Damen, T.; Sebastian, R.; Macdonald, M.; Soetanto, D.; Hartmann, Timo; Di Giulio, R.; Bonsma, P.; Luig, K.

    2015-01-01

    Collective Self-Organised (CSO) housing projects are an emerging trend in Europe. In these projects communities engage in co-design throughout the process. Little knowledge exists that can support CSOs with the process of managing their projects by using state-of-the-art building information (BI)

  10. Principles and status of neutron-based inspection technologies

    Science.gov (United States)

    Gozani, Tsahi

    2011-06-01

    and energetically significantly different from the background, thus making them readily distinguishable. The penetrability of neutrons as probes and signatures as well as the gamma ray signatures make neutron interrogation applicable to the inspection of large conveyances such as cars, trucks, marine containers and also smaller objects like explosive mines concealed in the ground. The application of nuclear interrogation techniques greatly depends on operational requirements. For example explosive mines and IED detection clearly require one-sided inspection, which excludes transmission based inspection (e.g., transmission radiography) and greatly limits others. The technologies developed over the last decades are now being implemented with good results. Further advances have been made over the last several years that increase the sensitivity, applicability and robustness of these systems. The principle, applications and status of neutron-based inspection techniques will be reviewed.

  11. Air-Source Integrated Heat Pump for Near-Zero Energy Houses: Technology Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, Richard W [ORNL; Rice, C Keith [ORNL; Baxter, Van D [ORNL; Craddick, William G [ORNL

    2007-07-01

    This report documents the development of an air-source integrated heat pump (AS-IHP) through the third quarter of FY2007. It describes the design, analyses and testing of the AS-IHP, and provides performance specifications for a field test prototype and proposed control strategy. The results obtained so far continue to support the AS-IHP being a promising candidate to meet the energy service needs for DOE's development of a Zero Energy Home (ZEH) by the year 2020.

  12. Sustainable learning of heating? Domestication of energy technology in passive houses; Uthaalligt laerande om vaermen? Domesticering av energiteknik i passivhus

    Energy Technology Data Exchange (ETDEWEB)

    Isaksson, Charlotta (Linkoeping Univ., Linkoeping (Sweden). Dept. of Technology and Social Change)

    2009-10-15

    The aim of this project is to investigate the domestication in private homes of energy technology developed to reduce energy use and improve energy efficiency. The main theoretical concept used in the thesis is 'domestication'. It is used to describe how new technology is integrated into the everyday life of users. Domestication of energy technology is studied as a learning process and is theoretically based on a socio cultural learning perspective. A case study was made of how the energy concept in passive houses (and its related technologies) is domesticated in the daily life of householders. The indoor heat is generated from solar irradiation, human bodies, and people's use of appliances and lighting. The study comprises 20 apartments in passive houses (terrace style), built in 2001 which are located in Lindaas. In the autumn of 2002, 22 informants from 16 households were interviewed, and in the spring of 2005, 21 informants from 15 households. Four main research questions are posed. The first research question is related to two different stages and contexts of the domestication process. The first stage concerns the purchasing of the passive house and focuses on the period before the householders moved in. The second stage focuses on indoor temperature - and concerns how the energy concept is incorporated into the daily activities of the household. common experience in the re-evaluating zone was that the indoor temperature in the home initially felt strange and abnormal, but as time passed it was perceived as normal. This process also leads to a re-evaluation of the households' participation in the comfort practice of the passive house. It is a gradual adjustment and a changed view of the resources that are available. The two remaining research questions deal with the technical heating system of the passive houses. It mainly concerns an air heating system, with a 900 W integrated heater in the air supply. The third research question

  13. Energy efficient industrialized housing research program

    Energy Technology Data Exchange (ETDEWEB)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-12-01

    This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

  14. Planetary Science Technology Infusion Study: Findings and Recommendations Status

    Science.gov (United States)

    Anderson, David J.; Sandifer, Carl E., II; Sarver-Verhey, Timothy R.; Vento, Daniel M.; Zakrajsek, June F.

    2014-01-01

    The Planetary Science Division (PSD) within the National Aeronautics and Space Administrations (NASA) Science Mission Directorate (SMD) at NASA Headquarters sought to understand how to better realize a scientific return on spacecraft system technology investments currently being funded. In order to achieve this objective, a team at NASA Glenn Research Center was tasked with surveying the science and mission communities to collect their insight on technology infusion and additionally sought inputs from industry, universities, and other organizations involved with proposing for future PSD missions. This survey was undertaken by issuing a Request for Information (RFI) activity that requested input from the proposing community on present technology infusion efforts. The Technology Infusion Study was initiated in March 2013 with the release of the RFI request. The evaluation team compiled and assessed this input in order to provide PSD with recommendations on how to effectively infuse new spacecraft systems technologies that it develops into future competed missions enabling increased scientific discoveries, lower mission cost, or both. This team is comprised of personnel from the Radioisotope Power Systems (RPS) Program and the In-Space Propulsion Technology (ISPT) Program staff.The RFI survey covered two aspects of technology infusion: 1) General Insight, including: their assessment of barriers to technology infusion as related to infusion approach; technology readiness; information and documentation products; communication; integration considerations; interaction with technology development areas; cost-capped mission areas; risk considerations; system level impacts and implementation; and mission pull. 2) Specific technologies from the most recent PSD Announcements of Opportunities (AOs): The Advanced Stirling Radioisotope Generator (ASRG), aerocapture and aeroshell hardware technologies, the NASA Evolutionary Xenon Thruster (NEXT) ion propulsion system, and the

  15. Status quo and development trend of breast biopsy technology

    National Research Council Canada - National Science Library

    Zhang, Yan-Jun; Wei, Lichun; Li, Jie; Zheng, Yi-Qiong; Li, Xi-Ru

    2013-01-01

    .... With the continuous advancement of diagnostic and treatment technology for breast cancer, collection of diseased tissue has also undergone a gradual transition from traditional open surgery to biopsy...

  16. Status of NASA's Earth-to-Orbit Propulsion Technology program

    Science.gov (United States)

    Escher, W. J. D.; Moses, J. L.; Gorland, S. H.; Stephenson, F. W.

    1991-01-01

    Earth-to-Orbit Propulsion Technology program is considered. The program's three major technical areas include combustion devices, turbomachinery, and controls and monitoring. Directed toward reducing acquisition and operations risk and cost the ETO program is conducted in two serially-performed categories: technology acquisition and technology validation. The former is constituted of studies, tool building, and bench-scale experimentation. The latter involves next-step verification of the acquisition results and findings, usually leading to a test-bed validated technology 'product'.

  17. Thiamethoxam Resistance in the House Fly, Musca domestica L.: Current Status, Resistance Selection, Cross-Resistance Potential and Possible Biochemical Mechanisms.

    Directory of Open Access Journals (Sweden)

    Hafiz Azhar Ali Khan

    Full Text Available The house fly, Musca domestica L., is an important ectoparasite with the ability to develop resistance to insecticides used for their control. Thiamethoxam, a neonicotinoid, is a relatively new insecticide and effectively used against house flies with a few reports of resistance around the globe. To understand the status of resistance to thiamethoxam, eight adult house fly strains were evaluated under laboratory conditions. In addition, to assess the risks of resistance development, cross-resistance potential and possible biochemical mechanisms, a field strain of house flies was selected with thiamethoxam in the laboratory. The results revealed that the field strains showed varying level of resistance to thiamethoxam with resistance ratios (RR at LC50 ranged from 7.66-20.13 folds. Continuous selection of the field strain (Thia-SEL for five generations increased the RR from initial 7.66 fold to 33.59 fold. However, resistance declined significantly when the Thia-SEL strain reared for the next five generations without exposure to thiamethoxam. Compared to the laboratory susceptible reference strain (Lab-susceptible, the Thia-SEL strain showed cross-resistance to imidacloprid. Synergism tests revealed that S,S,S-tributylphosphorotrithioate (DEF and piperonyl butoxide (PBO produced synergism of thiamethoxam effects in the Thia-SEL strain (2.94 and 5.00 fold, respectively. In addition, biochemical analyses revealed that the activities of carboxylesterase (CarE and mixed function oxidase (MFO in the Thia-SEL strain were significantly higher than the Lab-susceptible strain. It seems that metabolic detoxification by CarE and MFO was a major mechanism for thiamethoxam resistance in the Thia-SEL strain of house flies. The results could be helpful in the future to develop an improved control strategy against house flies.

  18. Thiamethoxam Resistance in the House Fly, Musca domestica L.: Current Status, Resistance Selection, Cross-Resistance Potential and Possible Biochemical Mechanisms.

    Science.gov (United States)

    Khan, Hafiz Azhar Ali; Akram, Waseem; Iqbal, Javaid; Naeem-Ullah, Unsar

    2015-01-01

    The house fly, Musca domestica L., is an important ectoparasite with the ability to develop resistance to insecticides used for their control. Thiamethoxam, a neonicotinoid, is a relatively new insecticide and effectively used against house flies with a few reports of resistance around the globe. To understand the status of resistance to thiamethoxam, eight adult house fly strains were evaluated under laboratory conditions. In addition, to assess the risks of resistance development, cross-resistance potential and possible biochemical mechanisms, a field strain of house flies was selected with thiamethoxam in the laboratory. The results revealed that the field strains showed varying level of resistance to thiamethoxam with resistance ratios (RR) at LC50 ranged from 7.66-20.13 folds. Continuous selection of the field strain (Thia-SEL) for five generations increased the RR from initial 7.66 fold to 33.59 fold. However, resistance declined significantly when the Thia-SEL strain reared for the next five generations without exposure to thiamethoxam. Compared to the laboratory susceptible reference strain (Lab-susceptible), the Thia-SEL strain showed cross-resistance to imidacloprid. Synergism tests revealed that S,S,S-tributylphosphorotrithioate (DEF) and piperonyl butoxide (PBO) produced synergism of thiamethoxam effects in the Thia-SEL strain (2.94 and 5.00 fold, respectively). In addition, biochemical analyses revealed that the activities of carboxylesterase (CarE) and mixed function oxidase (MFO) in the Thia-SEL strain were significantly higher than the Lab-susceptible strain. It seems that metabolic detoxification by CarE and MFO was a major mechanism for thiamethoxam resistance in the Thia-SEL strain of house flies. The results could be helpful in the future to develop an improved control strategy against house flies.

  19. The Impact of Generational Status on Instructors' Reported Technology Usage

    Science.gov (United States)

    Skidmore, Susan Troncoso; Zientek, Linda Reichwein; Saxon, D. Patrick; Edmonson, Stacey L.

    2014-01-01

    Although the majority of colleges and universities are equipped with the latest instructional technologies, an appreciable integration of technology has not been observed in instructional practices (Flavin, 2013; Garrison & Akyol, 2009; Salinas, 2008). The purpose of this research is to understand the impact that generational differences can…

  20. Status and prospect of radiation processing technology in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Khairul Zaman Hj. Mohd Dahlan; Nahrul Khair Alang Md Rashid [Malaysian Institute for Nuclear Technology Research (MINT), Bangi, Selangor Darul Ehsan (Malaysia)

    2001-03-01

    Radiation processing technology in Malaysia is gaining acceptance by the local industry. The technology has proven to enhance the industrial efficiency, productivity and improve product quality and competitiveness. For many years, variety of radiation crosslinkable materials based on synthetic polymers have been produced either in the form of thermoplastic resins, polymer blends or composites. Today, effort is being focused towards producing environmentally friendly and biodegradable materials using natural polymers. The government of Malaysia through the Malaysian Institute for Nuclear Technology Research (MINT) has developed research program to utilize indigenous materials such as natural rubber, palm oil and polysaccharide. Radiation processing technology is used to process (crosslink/grafting/curing) the materials at a competitive cost. This technology can be applied in several industrial sectors such as automobile, aerospace, construction and healthcare. (author)

  1. Status quo and development trend of lost foam casting technology

    Directory of Open Access Journals (Sweden)

    Fan Zitian

    2014-07-01

    Full Text Available Lost foam casting (LFC technology has been widely applied to cast iron and cast steel. However, the development of LFC for Al and Mg alloys was relatively slower than that for cast iron and cast steel. The application of LFC to Al and Mg alloys needs more effort, especially in China. In this paper, the development history of LFC is reviewed, and the application situations of LFC to Al and Mg alloys are mainly discussed. Meanwhile, the key problems of LFC for Al and Mg alloys are also pointed out. Finally, the prospects for LFC technology are discussed, and some special new LFC technologies are introduced for casting Al and Mg alloys. In future, the development trends of green LFC technology mainly focus on the special new LFC methods, metal material, coating, heat treatment, new foam materials as well as purification technology of tail gas, etc.

  2. Status quo and development trend of lost foam casting technology

    Institute of Scientific and Technical Information of China (English)

    Fan Zitian; Jiang Wenming; Liu Fuchu; Xiao Botao

    2014-01-01

    Lost foam casting (LFC) technology has been widely applied to cast iron and cast steel. However, the development of LFC for Al and Mg aloys was relatively slower than that for cast iron and cast steel. The application of LFC to Al and Mg aloys needs more effort, especially in China. In this paper, the development history of LFC is reviewed, and the application situations of LFC to Al and Mg aloys are mainly discussed. Meanwhile, the key problems of LFC for Al and Mg aloys are also pointed out. Finaly, the prospects for LFC technology are discussed, and some special new LFC technologies are introduced for casting Al and Mg alloys. In future, the development trends of green LFC technology mainly focus on the special new LFC methods, metal material, coating, heat treatment, new foam materials as wel as puriifcation technology of tail gas, etc.

  3. House ownership, frequency of illness, fathers' education: the most significant socio-demographic determinants of poor nutritional status in adolescent girls from low income households of Lahore, Pakistan.

    Science.gov (United States)

    Hassan, Fatima; Asim, Muhammad; Salim, Shafya; Humayun, Ayesha

    2017-07-11

    Socio demographic factors besides dietary factors play important role in determining the health status of an individual. Health and nutritional Intervention programs stand a greater chance of success if planned, keeping the socio demographic characteristics of a certain population in focus. The present study was conducted to identify those socio demographic determinants which have a significant association with poor nutritional status in adolescent girls belonging to economically deprived households of Lahore. A cross-sectional analytical study of 140 adolescent girls living in the peri urban communities of Lahore was conducted. Socioeconomic and demographic data of the participants was recorded through a pretested questionnaire. Body mass index (BMI), a commonly used anthropometric measurement was taken as an indicator of nutritional status. Below normal (socio demographic variables were calculated and Fisher Exact test was used to find out the association of nutritional status with socio-demographic predictors. Stepwise backward logistic regression analysis was then run to identify the most significant determinants associated with poor nutritional status in the adolescents. P food insecure (AOR = 0.431; 95% CI = 0.164 to 1.133) had lesser odds of having poor nutritional status than those who lived in nuclear families and were food secure. Frequency of illness, house ownership and fathers' education are the determinants positively associated with poor nutritional status of adolescent girls. Food insecurity and joint family structure were negatively associated with poor nutritional status. The study will help in planning interventions for improving nutritional status of adolescent girls by targeting the significant socio demographic determinants of poor nutritional status among this group.

  4. The Status of Basic Technology in Cross River State Junior ...

    African Journals Online (AJOL)

    info

    Copyright © IAARR, 2007-2016: www.afrrevjo.net. Indexed African ... instructional materials for teaching basic technology in junior secondary school in. Cross River State and .... resource utilization. Conference paper, Nigeria Audio – visual.

  5. Extravehicular Activity (EVA) Technology Development Status and Forecast

    Science.gov (United States)

    Chullen, Cinda; Westheimer, David T.

    2010-01-01

    Beginning in Fiscal Year (FY) 2011, Extravehicular activity (EVA) technology development became a technology foundational domain under a new program Enabling Technology Development and Demonstration. The goal of the EVA technology effort is to further develop technologies that will be used to demonstrate a robust EVA system that has application for a variety of future missions including microgravity and surface EVA. Overall the objectives will be reduce system mass, reduce consumables and maintenance, increase EVA hardware robustness and life, increase crew member efficiency and autonomy, and enable rapid vehicle egress and ingress. Over the past several years, NASA realized a tremendous increase in EVA system development as part of the Exploration Technology Development Program and the Constellation Program. The evident demand for efficient and reliable EVA technologies, particularly regenerable technologies was apparent under these former programs and will continue to be needed as future mission opportunities arise. The technological need for EVA in space has been realized over the last several decades by the Gemini, Apollo, Skylab, Space Shuttle, and the International Space Station (ISS) programs. EVAs were critical to the success of these programs. Now with the ISS extension to 2028 in conjunction with a current forecasted need of at least eight EVAs per year, the EVA technology life and limited availability of the EMUs will become a critical issue eventually. The current Extravehicular Mobility Unit (EMU) has vastly served EVA demands by performing critical operations to assemble the ISS and provide repairs of satellites such as the Hubble Space Telescope. However, as the life of ISS and the vision for future mission opportunities are realized, a new EVA systems capability could be an option for the future mission applications building off of the technology development over the last several years. Besides ISS, potential mission applications include EVAs for

  6. Current status and future tasks of the Sunshine Project. (Development of new energy technology)

    Energy Technology Data Exchange (ETDEWEB)

    Takada, T.

    1983-01-01

    Since its inception in 1974, the Sunshine Project has involved advances in new energy technology in many areas. The present report covers the principal areas of activity in 1980, examining the development status of solar energy, goethermal energy, coal liquefaction and gasification, hydrogen energy, wind power, ocean thermal energy conversion, etc. Future trends and tasks of new energy technology development are discussed. (In Japanese)

  7. Present status and trend of technological developments for millimeter wave sensing systems

    Science.gov (United States)

    Ihara, Toshio; Okamoto, Ken'ichi; Kitamura, Katsumi; Awaka, Jun; Manabe, Takeshi

    1989-06-01

    Millimeter wave atmospheric propagation characteristics and state-of-the-art millimeter wave component technologies are reviewed. Particular attention is given to the current status of technological developments for millimeter wave sensing systems such as automotive radars, automatic location identification systems, and industrial instrumentation radars.

  8. Current Status of Helium-3 Alternative Technologies for Nuclear Safeguards

    Energy Technology Data Exchange (ETDEWEB)

    Henzlova, Daniela [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kouzes, R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McElroy, R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Peerani, P. [European Commission, Ispra (Italy). Joint Research Centre; Aspinall, M. [Hybrid Instruments Ltd., Birmingham (United Kingdom); Baird, K. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Bakel, A. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Borella, M. [SCK.CEN, Mol (Belgium); Bourne, M. [Univ. of Michigan, Ann Arbor, MI (United States); Bourva, L. [Canberra Ltd., Oxford (United Kingdom); Cave, F. [Hybrid Instruments Ltd., Birmingham (United Kingdom); Chandra, R. [Arktis Radiation Detectors Ltd., Zurich (Sweden); Chernikova, D. [Chalmers Univ. of Technology (Sweden); Croft, S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dermody, G. [Symetrica Inc., Maynard, MA (United States); Dougan, A. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Ely, J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fanchini, E. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Finocchiaro, P. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Gavron, Victor [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kureta, M. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Ianakiev, Kiril Dimitrov [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ishiyama, K. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Lee, T. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Martin, Ch. [Symetrica Inc., Maynard, MA (United States); McKinny, K. [GE Reuter-Stokes, Twinsburg, OH (United States); Menlove, Howard Olsen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Orton, Ch. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Pappalardo, A. [Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy); Pedersen, B. [European Commission, Ispra (Italy). Joint Research Centre; Peranteau, D. [National Nuclear Security Administration (NNSA), Washington, DC (United States); Plenteda, R. [Intl Atomic Energy Agency (IAEA), Vienna (Austria); Pozzi, S. [Univ. of Michigan, Ann Arbor, MI (United States); Schear, M. [Symetrica Inc., Maynard, MA (United States); Seya, M. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Siciliano, E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stave, S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sun, L. [Proportional Technologies Inc., Houston, TX (United States); Swinhoe, Martyn Thomas [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Tagziria, H. [European Commission, Ispra (Italy). Joint Research Centre; Vaccaro, S. [DG Energy (Luxembourg); Takamine, J. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Weber, A. -L. [Inst. for Radiological Protection and Nuclear Safety (IRSN), Fontenay-aux-Roses (France); Yamaguchi, T. [Japan Atomic Energy Agency (JAEA), Tokai (Japan); Zhu, H. [National Nuclear Security Administration (NNSA), Washington, DC (United States)

    2015-12-01

    International safeguards inspectorates (e.g., International Atomic Energy Agency {IAEA}, or Euratom) rely heavily on neutron assay techniques, and in particular, on coincidence counters for the verification of declared nuclear materials under safeguards and for monitoring purposes. While 3He was readily available, the reliability, safety, ease of use, gamma-ray insensitivity, and high intrinsic thermal neutron detection efficiency of 3He-based detectors obviated the need for alternative detector technologies. However, the recent decline of the 3He gas supply has triggered international efforts to develop and field neutron detectors that make use of alternative materials. In response to this global effort, the U.S. Department of Energy’s (DOE) National Nuclear Security Administration (NNSA) and Euratom launched a joint effort aimed at bringing together international experts, technology users and developers in the field of nuclear safeguards to discuss and evaluate the proposed 3He alternative materials and technologies. The effort involved a series of two workshops focused on detailed overviews and viability assessments of various 3He alternative technologies for use in nuclear safeguards applications. The key objective was to provide a platform for collaborative discussions and technical presentations organized in a compact, workshop-like format to stimulate interactions among the participants. The meetings culminated in a benchmark exercise providing a unique opportunity for the first inter-comparison of several available alternative technologies. This report provides an overview of the alternative technology efforts presented during the two workshops along with a summary of the benchmarking activities and results. The workshop recommendations and key consensus observations are discussed in the report, and used to outline a proposed path forward and future needs foreseeable in the area of 3

  9. Status and prospects of frozen soil studies using CT technology

    Institute of Scientific and Technical Information of China (English)

    ShiJie Chen; ShuPing Zhao; Wei Ma; QianTao Zhu; LiLi Xing

    2014-01-01

    This paper introduces the characteristics of Computed Tomography (CT) technology and reviews its history, current situation, representative achievements, and use of using CT technology on frozen soil study, including auxiliary equipment specially de-signed for frozen soil studies. CT numbers are used to analyze frozen soil internal structure change, defining and exploring dam-age evolution, and use of CT images on observing soil mesostructure. Finally, this paper presents existing problems confronted by using CT in frozen soil studies, possible solutions and challenges, among which, we introduce high quality CT image processing for frozen soils, and relations between CT number change and each component change on frozen soil samples within the region of interest. It is shown that present CT technology is one of the most ideal and effective technology to study frozen soil mesostructure using non-destructive testing. CT technology will play a key role in the study and development in the field of frozen soil by means of auxiliary equipment and the digital imaging processing.

  10. A status of the Turbine Technology Team activities

    Science.gov (United States)

    Griffin, Lisa W.

    1992-01-01

    The recent activities of the Turbine Technology Team of the Consortium for Computational Fluid Dynamics (CFD) Application in Propulsion Technology is presented. The team consists of members from the government, industry, and universities. The goal of this team is to demonstrate the benefits to the turbine design process attainable through the application of CFD. This goal is to be achieved by enhancing and validating turbine design tools for improved loading and flowfield definition and loss prediction, and transferring the advanced technology to the turbine design process. In order to demonstrate the advantages of using CFD early in the design phase, the Space Transportation Main Engine (STME) turbines for the National Launch System (NLS) were chosen on which to focus the team's efforts. The Turbine Team activities run parallel to the STME design work.

  11. Status quo and development trend of breast biopsy technology.

    Science.gov (United States)

    Zhang, Yan-Jun; Wei, Lichun; Li, Jie; Zheng, Yi-Qiong; Li, Xi-Ru

    2013-02-01

    Triple assessment is a standard method for assessment of breast diseases, which includes clinical evaluation, radiographic assessment and pathological assessment. Biopsy for breast disease is the gold standard for pathological assessment, including incisional biopsy, excisional biopsy, core needle biopsy, vacuum-assisted biopsy and bite biopsy. With the continuous advancement of diagnostic and treatment technology for breast cancer, collection of diseased tissue has also undergone a gradual transition from traditional open surgery to biopsy. This review summarizes the current situation and development of breast biopsy technology to provide an insight into the latest details such as the safety and reliability as the basis for selection of the most appropriate techniques for specific settings.

  12. A Quantitative Examination of the Educational Technology Characteristics of Ohio Schools and Their Blue Ribbon Status

    Science.gov (United States)

    Goon, Dean A.

    2012-01-01

    The purpose of this study was to analyze data from Ohio schools and the frequency of use of educational technology, a teacher's comfort level using technology, and a teacher's beliefs about the effect of educational technology on teaching and learning based upon the school's Blue Ribbon award status. The study used an ex-post facto,…

  13. 21st Century Locomotive Technology: Quarterly Technical Status Report 28

    Energy Technology Data Exchange (ETDEWEB)

    Lembit Salasoo; Ramu Chandra

    2010-02-19

    Thermal testing of a subscale locomotive sodium battery module was initiated.to validate thermal models. The hybrid trip optimizer problem was formulated. As outcomes of this project, GE has proceeded to commercialize trip optimizer technology, and has initiated work on a state-of-the-art battery manufacturing plant for high energy density, sodium-based batteries.

  14. Status report on survey of alternative heat pumping technologies

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, S.

    1998-07-01

    The Department of Energy is studying alternative heat pumping technologies to identify possible cost effective alternatives to electric driven vapor compression heat pumps, air conditioners, and chillers that could help reduce CO{sub 2} emissions. Over thirty different technologies are being considered including: engine driven systems, fuel cell powered systems, and alternative cycles. Results presented include theoretical efficiencies for all systems as well as measured performance of some commercial, prototype, or experimental systems. Theoretical efficiencies show that the alternative electric-driven technologies would have HSPFs between 4 and 8 Btu/Wh (1.2 to 2.3 W/W) and SEERs between 3 and 9.5 Btu/Wh (0.9 and 2.8 W/W). Gas-fired heat pump technologies have theoretical seasonal heating gCOPs from 1.1 to 1.7 and cooling gCOPs from 0.95 to 1.6 (a SEER 12 Btu/Wh electric air conditioner has a primary energy efficiency of approximately 1.4 W/W).

  15. Technology status of HNF-based monopropellants for satellite propulsion

    NARCIS (Netherlands)

    Marée, A.G.M.; Moerel, J.L.P.A.; Weiland-Veltmans, W.H.M.; Wierkx, F.J.M.; Zevenbergen, J.

    2004-01-01

    This paper reports on significant technological progress made over the last few years in determining the feasibility of HNF-based monopropellants. An HNF-based monopropellant is an interesting alternative for hydrazine as monopropellant for satellite propulsion. New non-toxic monopropellants based o

  16. Technology status of HNF-based monopropellants for satellite propulsion

    NARCIS (Netherlands)

    Marée, A.G.M.; Moerel, J.L.P.A.; Weiland-Veltmans, W.H.M.; Wierkx, F.J.M.; Zevenbergen, J.

    2004-01-01

    This paper reports on significant technological progress made over the last few years in determining the feasibility of HNF-based monopropellants. An HNF-based monopropellant is an interesting alternative for hydrazine as monopropellant for satellite propulsion. New non-toxic monopropellants based o

  17. Status of Assistive Technology Instruction in University Personnel Preparation Programs

    Science.gov (United States)

    Bausch, Margaret E.; Ault, Melinda Jones

    2012-01-01

    The reauthorization of IDEA mandates that students with a disability must be considered for assistive technology (AT). However, in order to implement the mandate, teachers and related service personnel must be knowledgeable about many aspects of AT. The purpose of this study was to gauge the extent to which personnel preparation programs believe…

  18. Biomass torrefaction technology: Techno-economic status and future prospects

    NARCIS (Netherlands)

    Batidzirai, B.; Mignot, A.P.R.; Schakel, W.B.; Junginger, H.M.; Faaij, A.P.C.

    2013-01-01

    Torrefaction is a promising bioenergy pre-treatment technology, with potential to make a major contribution to the commodification of biomass. However, there is limited scientific knowledge on the techno-economic performance of torrefaction. This study therefore improves available knowledge on torre

  19. Fuels from microalgae: Technology status, potential, and research requirements

    Energy Technology Data Exchange (ETDEWEB)

    Neenan, B.; Feinberg, D.; Hill, A.; McIntosh, R.; Terry, K.

    1986-08-01

    Although numerous options for the production of fuels from microalgae have been proposed, our analysis indicates that only two qualify for extensive development - gasoline and ester fuel. In developing the comparisons that support this conclusion, we have identified the major areas of microalgae production and processing that require extensive development. Technology success requires developing and testing processes that fully utilize the polar and nonpolar lipids produced by microalgae. Process designs used in these analyses were derived from fragmented, preliminary laboratory data. These results must be substantiated and integrated processes proposed, tested, and refined to be able to evaluate the commercial feasibility from microalgae. The production of algal feedstocks for processing to gasoline or ester fuel requires algae of high productivity and high lipid content that efficiently utilize saline waters. Species screening and development suggest that algae can achieve required standards taken individually, but algae that can meet the integrated requirements still elude researchers. Effective development of fuels from microalgae technology requires that R and D be directed toward meeting the integrated standards set out in the analysis. As technology analysts, it is inappropriate for us to dictate how the R and D effort should proceed to meet these standards. We end our role by noting that alternative approaches to meeting the feasibility targets have been identified, and it is now the task of program managers and scientists to choose the appropriate approach to assure the greatest likelihood of realizing a commercially viable technology. 70 refs., 39 figs., 35 tabs.

  20. Employing mobile media technologies as a participatory planning tool in the suburban housing estate

    DEFF Research Database (Denmark)

    Andersson, Lasse; Knudsen, Anne-Marie Sanvig

    2013-01-01

    As a response to the NSSB 2013 conference call ‘Suburbs-transformation and development”, we want to look at new methods for creating citizen participation in urban development processes by drawing on practical experiences gathered through a collaborative planning project between researchers...... at Aalborg University, Denmark, an urban consultancy firm, and city planners in Vollsmose, Odense, Denmark in 2011-12. In this particular context, the practical challenge was to develop new facets to a master planning process at the Vollsmose housing estate, located in the outskirts of Odense. By evolving...... an on-going process, informed by mobile citizen generated information loops (open-source), the aim was to move beyond the master plan as a detached expert-driven product and towards an instant master planning process. In order to explore this iterative take on the planning process the research team...

  1. Clean Coal Technologies in China: Current Status and Future Perspectives

    Directory of Open Access Journals (Sweden)

    Shiyan Chang

    2016-12-01

    Full Text Available Coal is the dominant primary energy source in China and the major source of greenhouse gases and air pollutants. To facilitate the use of coal in an environmentally satisfactory and economically viable way, clean coal technologies (CCTs are necessary. This paper presents a review of recent research and development of four kinds of CCTs: coal power generation; coal conversion; pollution control; and carbon capture, utilization, and storage. It also outlines future perspectives on directions for technology research and development (R&D. This review shows that China has made remarkable progress in the R&D of CCTs, and that a number of CCTs have now entered into the commercialization stage.

  2. Status quo and development trend of breast biopsy technology

    OpenAIRE

    Zhang, Yan-Jun; Wei, Lichun; Li, Jie; Yi-qiong ZHENG; Li, Xi-Ru

    2013-01-01

    Triple assessment is a standard method for assessment of breast diseases, which includes clinical evaluation, radiographic assessment and pathological assessment. Biopsy for breast disease is the gold standard for pathological assessment, including incisional biopsy, excisional biopsy, core needle biopsy, vacuum-assisted biopsy and bite biopsy. With the continuous advancement of diagnostic and treatment technology for breast cancer, collection of diseased tissue has also undergone a gradual t...

  3. The Status and Trends Of New Power Generation technology

    OpenAIRE

    Zhou, Jianguo

    2016-01-01

    Science and technology development cannot leave energy, and our life is also inseparable from energy. Oil and coal in all energy is 80%. However, oil and coal are non-renewable. If precious energies would disappear, what should we do? Oil and coal combustion and release of energy we need, and it also releases harmful gases which lead to damage of our home planet. These problems forces us to develop clean and renewable new energy. This report discusses mainly three new source...

  4. Program status 3. quarter -- FY 1994: ITER and technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-07-19

    During this quarter all technical work and documentation of the PULSAR design was completed. They also assisted UCLA in the planning of the DEMO program.In the area of RF technology, a decision was made to fabricate 4in x 4in gyrotron distributed window. An finally, they obtained good agreement between code predictions and measured data for the up and down field redeposition of tungsten in the DIMES-8 experiment.

  5. Dish concentrators for solar thermal energy: Status and technology development

    Science.gov (United States)

    Jaffe, L. D.

    1982-01-01

    Point-focusing concentrators under consideration for solar thermal energy use are reviewed. These concentrators differ in such characteristics as optical configuration, optical materials, structure for support of the optical elements and of the receiver, mount, foundation, drive, controls and enclosure. Concentrator performance and cost are considered. Technology development is outlined, including wind loads and aerodynamics; precipitation, sand, and seismic considerations; and maintenance and cleaning.

  6. Present status of phosphorus removal technology and its future prospect

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Kazuaki

    1988-10-10

    This report outlines the special features of two representative processes of the technology for phosphorus removal from municipal sewage: a physical and chemical method and a biological method. In Japan, coagulating precipitation is carried out using aluminum sulphate or polyaluminum chloride but it is pointed out that this method increases the developed amount of sludge and drops the concentration and dehydration of sludge. Recently, crystallization dephosphorization technology is drawing much attention. This technology precipitates phosphorus as hydroxyapatite using phosphorus ore and bone black as crystal druse under the condition of the addition of lime. For biological dephosphorization, a phostrip method and an anaerobic-aerobic method are being developed. According to the estimation in Japan, it is possible to lower the concentration of total phosphorus in municipal sewage from 5mg*1/sup /minus/1/ to less than 1.0mg*1/sup /minus/1/ by this anaerobic-aerobic method. It is desirable that in the future technical features of the physical and chemical phosphorus removal method and the biological phosphorus removal method will be comparatively studied and a most effective and economic method of preventing eutrophication will be developed and selected. 6 references, 3 figures, 1 table.

  7. Transcriptomic analysis of the stress response to weaning at housing in bovine leukocytes using RNA-seq technology

    Directory of Open Access Journals (Sweden)

    O’Loughlin Aran

    2012-06-01

    Full Text Available Abstract Background Weaning of beef calves is a necessary husbandry practice and involves separating the calf from its mother, resulting in numerous stressful events including dietary change, social reorganisation and the cessation of the maternal-offspring bond and is often accompanied by housing. While much recent research has focused on the physiological response of the bovine immune system to stress in recent years, little is known about the molecular mechanisms modulating the immune response. Therefore, the objective of this study was to provide new insights into the molecular mechanisms underlying the physiological response to weaning at housing in beef calves using Illumina RNA-seq. Results The leukocyte transcriptome was significantly altered for at least 7 days following either housing or weaning at housing. Analysis of differentially expressed genes revealed that four main pathways, cytokine signalling, transmembrane transport, haemostasis and G-protein-coupled receptor (GPRC signalling were differentially regulated between control and weaned calves and underwent significant transcriptomic alterations in response to weaning stress on day 1, 2 and 7. Of particular note, chemokines, cytokines and integrins were consistently found to be up-regulated on each day following weaning. Evidence for alternative splicing of genes was also detected, indicating a number of genes involved in the innate and adaptive immune response may be alternatively transcribed, including those responsible for toll receptor cascades and T cell receptor signalling. Conclusions This study represents the first application of RNA-Seq technology for genomic studies in bovine leukocytes in response to weaning stress. Weaning stress induces the activation of a number of cytokine, chemokine and integrin transcripts and may alter the immune system whereby the ability of a number of cells of the innate and adaptive immune system to locate and destroy pathogens is

  8. Technology development activities for housing research animals on Space Station Freedom

    Science.gov (United States)

    Jenner, Jeffrey W.; Garin, Vladimir M.; Nguyen, Frank D.

    1991-01-01

    The development and design of animal facilities are described in terms of the technological needs for NASA's Biological Flight Research Laboratory. Animal habitats are presented with illustrations which encompass waste-collection techniques for microgravity conditions that reduce the need for crew participation. The technology is intended to be highly compatible with animal morphology, and airflow is employed as the primary mechanism of waste control. The airflow can be utilized in the form of localized high-speed directed flow that simultaneously provides a clean animal habitat and low airflow rates. The design of an animal-habitat testbed is presented which capitalizes on contamination-control mechanisms and suitable materials for microgravity conditions. The developments in materials and technologies represent significant contributions for the design of the centrifuge facilities for the Space Station Freedom.

  9. Space Science &Technology in Mauritius: Current Status and Future Opportunities

    Science.gov (United States)

    Rughooputh, S. D. D. V.; Beeharry, G. K.; Golap, K.; Issur, N. H.; Somanah, R.; Rughooputh, H. C. S.; Udayashankar, N.; Mueller, K.

    Space research (with either direct or indirect spin-offs) has been instrumental in leading to accomplishments that are meant to improve our quality of life in its broadest perspective. But are we all acquainted of the now proven-use of these findings and their capabilities? What do these mean to a remote small insular developing state like Mauritius? This paper explores the recent developments in this field in Mauritius and how we intend to optimize the use of the emerging technologies. Initiatives of the University of Mauritius are highlighted.

  10. 青海东部绿色民居建造技术讨论%Advances in the Green Housing Construction Technology of the East Part of Qinghai by Combining with Qinghai Present Housing Conditions

    Institute of Scientific and Technical Information of China (English)

    周莹

    2014-01-01

    本文旨在借助青海东部地区危房改造建设的有利时机,推进农房绿色民居建设,提出该地区民居建造不但应借鉴、传承原有的符合地域气候等条件的材料及技术,同时有机结合现代绿色建造技术,改造、提升其在规划、建筑结构设计及建筑节能方面的技术做法。%By making full and true use of the opportune time of remaking the dangerous houses for liv-ing in the east part of Qinghai ,the article convers the idea of green housing and puts forward to use the ex-periences of the original conditions (such as the special climate )for reference and carry on all the tradition-al technology .To combine the green housing construction technology with Qinghai current situations ,the w riter emphasized that the technical methods in housing planning ,designing and energy -saving must be improved .

  11. Retrofitting Housing with Lightweight Green Roof Technology in Sydney, Australia, and Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    Sara Wilkinson

    2015-01-01

    Full Text Available The built environment contributes around half of total greenhouse gas emissions and with 87% of residential buildings that we will have by 2050 already built, it is vital to adopt sustainable retrofitting practices. The question is: what are the viable solutions? One answer may be green roof retrofitting. The environmental benefits include reduced operational carbon emissions, reduced urban heat island effect, increased bio-diversity, housing temperature attenuation and reduced stormwater run-off. The economic benefits are the reduced maintenance costs and lower running costs. The social gain is the creation of spaces where people have access to green areas. However, the barriers to retrofitting include the perceptions of structural adequacy, the risk of water damage, high installation and maintenance costs, as well as access and security issues. Many Australian and Brazilian residential buildings have metal sheet roofs, a lightweight material with poor thermal performance. During the summer, temperatures in Sydney and Rio de Janeiro reach 45 degrees Celsius, and in both cities, rainfall patterns are changing, with more intense downpours. Furthermore, many residential buildings are leased, and currently, tenants are restricted by the modifications that they can perform to reduce running costs and carbon emissions. This research reports on an experiment on two small-scale metal roofs in Sydney and Rio de Janeiro to assess the thermal performance of portable small-scale modules. The findings are that considerable variation in temperature was found in both countries, indicating that green roof retrofitting could lower the cooling energy demand considerably.

  12. Technology, Innovation and Skills in Danish Non-profit Housing towards Yk2

    DEFF Research Database (Denmark)

    Bonke, Sten; Pedersen, Elsebet Frydendal

    1999-01-01

    The report summarises a comprehensive selection of interviews with macro-level actors in the Danish constuction sector. The different actors' field of operation is identified, and their strategies in relation to the market situation, technology, employment and qualification issues in construction...

  13. Research; BOSS Study Trip Japan '09: Architecture, Urbanism, Real Estate & Housing and Technology in Japan

    NARCIS (Netherlands)

    Feenstra, R.; Van Beelen, C.; Wamelink, J.W.F.; Geraedts, R.P.

    2010-01-01

    Japan is a land of many faces as we discovered: from seasonal changes, and thereby heavy rainfall, high humidity, tropical cyclones; to a stunning 127,300,000 inhabitants; or what about the only 10% buildable surface of the continent; seismic activity; fast going technological developments like elec

  14. Technology, Innovation and Skills in Danish Non-profit Housing towards Yk2

    DEFF Research Database (Denmark)

    Bonke, Sten; Pedersen, Elsebet Frydendal

    1999-01-01

    The report summarises a comprehensive selection of interviews with macro-level actors in the Danish constuction sector. The different actors' field of operation is identified, and their strategies in relation to the market situation, technology, employment and qualification issues in construction...

  15. Research; BOSS Study Trip Japan '09: Architecture, Urbanism, Real Estate & Housing and Technology in Japan

    NARCIS (Netherlands)

    Feenstra, R.; Van Beelen, C.; Wamelink, J.W.F.; Geraedts, R.P.

    2010-01-01

    Japan is a land of many faces as we discovered: from seasonal changes, and thereby heavy rainfall, high humidity, tropical cyclones; to a stunning 127,300,000 inhabitants; or what about the only 10% buildable surface of the continent; seismic activity; fast going technological developments like

  16. Remote participation technologies in the EFDA Laboratories - status and prospects

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, V. [Associazione EURATOM-ENEA sulla Fusione, Consorzio RFX, Padova (Italy); How, J.A. [Association Euratom-CEA Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee

    2003-07-01

    More than 25 laboratories of the European Fusion Development Agreement (EFDA) have been increasingly using remote participation (RP) technologies for collaborative work on several experiments. We present an overview of the technologies that are employed to provide remote data access, remote computer access, and tele-conference. We also deal with computer network requirements, and support and documentation needs. The biggest application of these tools has been the joint scientific exploitation of the JET Facilities. Increasingly other experiments are operated as shared facilities, and the RP tools are being used in this context. For remote data access there is a clear trend towards MDSplus as common data access layer for multi-experiment data access. Secure Remote Computer access is converging on two different solutions. Video-conference is also converging on two partially inter-operable solutions, whereas the sharing of presentation material is converging on one solution. Remote Control Room participation is being used in two laboratories. Network monitoring has been developed and is now in routine use. The RP work is being done at many laboratories and is co-ordinated by EFDA. A number of items in several fields need still to be tackled and an overview of these is presented. (authors)

  17. Flip chip bumping technology-Status and update

    Energy Technology Data Exchange (ETDEWEB)

    Juergen Wolf, M. [Fraunhofer IZM, Gustav-Meyer-Allee 25, 13355 Berlin (Germany)]. E-mail: juergen.Wolf@izm.fraunhofer.de; Engelmann, Gunter [Fraunhofer IZM, Gustav-Meyer-Allee 25, 13355 Berlin (Germany); Dietrich, Lothar [Fraunhofer IZM, Gustav-Meyer-Allee 25, 13355 Berlin (Germany); Reichl, Herbert [Fraunhofer IZM, Gustav-Meyer-Allee 25, 13355 Berlin (Germany)

    2006-09-01

    Flip chip technology is a key driver for new complex system architectures and high-density packaging, e.g. sensor or pixel devices. Bumped wafers/dice as key elements become very important in terms of general availability at low cost, high yield and quality level. Today, different materials, e.g. Au, Ni, AuSn, SnAg, SnAgCu, SnCu, etc., are used for flip chip interconnects and different bumping approaches are available. Electroplating is the technology of choice for high-yield wafer bumping for small bump sizes and pitches. Lead-free solder bumps require an increase in knowledge in the field of under bump metallization (UBM) and the interaction of bump and substrate metallization, the formation and growth of intermetallic compounds (IMCs) during liquid- and solid-phase reactions. Results of a new bi-layer UBM of Ni-Cu which is especially designed for small-sized lead-free solder bumps will be discussed.

  18. Study on Technology Development Status of Genetically Modified Soybean Based on Patent Analysis

    Directory of Open Access Journals (Sweden)

    Miao Runlian

    2015-07-01

    Full Text Available Genetically modified soybean is a product of the emerging bio-technology in the 1980s and is widely concerned all over the world. This study analyzed GM soybean related patent documents in China, the United States and Europe, aiming to find out the R and D status and trends as well as technical distribution pattern of GM soybean in the world. It analyzed the patent general tendency, regional distribution and key technologies, clarified major countries who master such technologies, relevant companies, technologies, etc. Finally, the author put forward solutions for the strategic development of GM soybean patents.

  19. Status of Uncooled Infrared Detector Technology at ULIS, France

    Directory of Open Access Journals (Sweden)

    J.L. Tissot

    2013-12-01

    Full Text Available The high level of accumulated expertise by ULIS and CEA/LETI on uncooled microbolometers made from amorphous silicon enables ULIS to develop uncooled IRFPA with 17 µm pixel-pitch to enable the development of small power, small weight and power (SWaP and high performance IR systems. Key characteristics of amorphous silicon based uncooled IR detector is described to highlight the advantage of this technology for system operation. A full range of products from 160 x 120 to 1024 x 768 has been developed and we will focus the paper on the ¼ VGA with 17 µm pixel pitch. Readout integrated circuit (ROIC architecture is described highlighting innovations that are widely on-chip implemented to enable an easier operation by the user. The detector configuration (integration time, windowing, gain, scanning direction, is driven by a standard I²C link. Like most of the visible arrays, the detector adopts the HSYNC/VSYNC free-run mode of operation driven with only one master clock (MC supplied to the ROIC which feeds back pixel, line and frame synchronisation. On-chip PROM memory for customer operational condition storage is available for detector characteristics. Low power consumption has been taken into account and less than 60 mW is possible in analogue mode at 60 Hz. A wide electrical dynamic range (2.4V is maintained despite the use of advanced CMOS node. The specific appeal of this unit lies in the high uniformity and easy operation it provides. The reduction of the pixel-pitch turns this TEC-less ¼ VGA array into a product well adapted for high resolution and compact systems. Noise equivalent temperature difference (NETD of 35 mK and thermal time constant of 10 ms have been measured leading to 350 mK.ms figure of merit. We insist on NETD trade-off with wide thermal dynamic range, as well as the high characteristics uniformity and pixel operability, achieved thanks to the mastering of the amorphous silicon technology coupled with the ROIC design

  20. Technology status in support of refined technical baseline for the Spent Nuclear Fuel project. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Puigh, R.J.; Toffer, H.; Heard, F.J.; Irvin, J.J.; Cooper, T.D.

    1995-10-20

    The Spent Nuclear Fuel Project (SNFP) has undertaken technology acquisition activities focused on supporting the technical basis for the removal of the N Reactor fuel from the K Basins to an interim storage facility. The purpose of these technology acquisition activities has been to identify technology issues impacting design or safety approval, to establish the strategy for obtaining the necessary information through either existing project activities, or the assignment of new work. A set of specific path options has been identified for each major action proposed for placing the N Reactor fuel into a ``stabilized`` form for interim storage as part of this refined technical basis. This report summarizes the status of technology information acquisition as it relates to key decisions impacting the selection of specific path options. The following specific categories were chosen to characterize and partition the technology information status: hydride issues and ignition, corrosion, hydrogen generation, drying and conditioning, thermal performance, criticality and materials accountability, canister/fuel particulate behavior, and MCO integrity. This report represents a preliminary assessment of the technology information supporting the SNFP. As our understanding of the N Reactor fuel performance develops the technology information supporting the SNFP will be updated and documented in later revisions to this report. Revision 1 represents the incorporation of peer review comments into the original document. The substantive evolution in our understanding of the technical status for the SNFP (except section 3) since July 1995 have not been incorporated into this revision.

  1. Hot house bad house

    OpenAIRE

    Azzopardi, Shaun

    2014-01-01

    Shaun Azzopardi met up with a team of researchers led by Eur. Ing. Charles Yousif to take the concrete block to the next level. It is more exciting than it sounds. Photography by Dr Edward Duca. http://www.um.edu.mt/think/hot-house-bad-house/

  2. Heatshield for Extreme Entry Environment Technology (HEEET) Development Status

    Science.gov (United States)

    Ellerby, Don; Gage, Peter; Kazemba, Cole; Mahzari, Milad; Nishioka, Owen; Peterson, Keith; Stackpoole, Mairead; Venkatapathy, Ethiraj; Young, Zion; Poteet, Carl; Splinter, Scott; Fowler, Mike; Kellerman, Charles

    2016-01-01

    The Heat shield for Extreme Entry Environment Technology (HEEET) Project is a NASA STMD and SMD co-funded effort. The goal is to develop and mission infuse a new ablative Thermal Protection System that can withstand extreme entry. It is targeted to support NASAs high priority missions, as defined in the latest decadal survey, to destinations such as Venus and Saturn in-situ robotic science missions. Entry into these planetary atmospheres results in extreme heating. The entry peak heat-flux and associated pressure are estimated to be between one and two orders of magnitude higher than those experienced by Mars Science Laboratory or Lunar return missions. In the recent New Frontiers community announcement NASA has indicated that it is considering providing an increase to the PI managed mission cost (PIMMC) for investigations utilizing the Heat Shield for Extreme Entry Environment Technology (HEEET) and in addition, NASA is considering limiting the risk assessment to only their accommodation on the spacecraft and the mission environment. The HEEET ablative TPS utilizes 3D weaving technology to manufacture a dual layer material architecture. The 3-D weaving allows for flat panels to be woven. The dual layer consists of a top layer designed to withstand the extreme external environment while the inner or insulating layer by design, is designed to achieve low thermal conductivity, and it keeps the heat from conducting towards the structure underneath. Both arc jet testing combined with material properties have been used to develop thermal response models that allows for comparison of performance with heritage carbon phenolic. A 50 mass efficiency is achieved by the dual layer construct compared to carbon phenolic for a broad range of missions both to Saturn and Venus. The 3-D woven flat preforms are molded to achieve the shape as they are compliant and then resin infusion with curing forms a rigid panels. These panels are then bonded on to the aeroshell structure. Gaps

  3. Current Status on Stress Diagnostic Kit and Detection Technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Hyun; Choi, Mi Hee; Ko, Kyong Cheol

    2008-06-15

    The accurate measurement of a stress level is one of the most important issues in a stress diagnosis and its measurement could be of great value in clinical medicine. Stress has a potent effect on the spirit and physical condition of an individual. There are various methods available for its measurement. Some of the commonly used techniques for the diagnosis of a stress level include analysis of the body fluids, questionnaire assessments, psychophysiological evaluations and by determining heart rate variability (HRV) of subjects. However, the existing diagnostic methods have several defects like, a low sensitivity, inaccuracy and long of operation time. In this report, we present a diagnostic technology to detect a stress level which is the origin of various diseases. This method can be of great help in providing an early diagnosis through a biosensor and might play a vital role in preventing diseases like hypochondria and hypertension. Majority of the human population is exposed to stress in one way or another and hence developing a convenient stress diagnosis kit will be of great use to all. This stress diagnostic kit and detection technology dose not involve simple a mechanical measurement or questionnaires, but is based on developing a detection kit with a high sensitivity, which will mean an easy use for common man. Individuals can undergo regular check ups and can personally diagnose their present situation of health by determining their stress levels, thus enabling them to diagnose the early onset of several stress disorders. This might help them take precautionary measures and thereby lead to a healthy life.

  4. Choosing The Right Technology - Optimized Design Of Renewable Supply Systems For Residential Houses

    DEFF Research Database (Denmark)

    Milan, Christian; Bojesen, Carsten; Nielsen, Mads Pagh

    2012-01-01

    The use of renewable energy sources (RES) has continuously increased throughout the last decade. In the residential building sector the trend goes towards energy supply systems based on multiple RES. This is mainly due to political requirements, governmental subsidies and fuel price development....... These systems not only require an optimal design with respect to the installed capacities but also the right choice in combining the available technologies assuring a cost-effective solution. The aim of this paper is to present an optimization methodology for residential on-site energy supply systems based...... on mixed integer linear programming. The methodology chooses the right combination of technologies and sizes the components based on on-site weather data and expected consumption profiles. Through this approach the fluctuations of RES as well as the user behavior are taken into account already during...

  5. Research; BOSS Study Trip Japan '09: Architecture, Urbanism, Real Estate & Housing and Technology in Japan

    OpenAIRE

    2010-01-01

    Japan is a land of many faces as we discovered: from seasonal changes, and thereby heavy rainfall, high humidity, tropical cyclones; to a stunning 127,300,000 inhabitants; or what about the only 10% buildable surface of the continent; seismic activity; fast going technological developments like electronic gadgets, robots, and supersonic trains without even a second delay (in contrast of the Dutch situation)... Even in its names Nihon, Nippen, Nippon, Japon or Japan, one gets fascinated by the...

  6. Development Status of the Fission Power System Technology Demonstration Unit

    Science.gov (United States)

    Briggs, Maxwell H.; Gibson, Marc A.; Geng, Steven M.; Pearson, Jon Boise; Godfoy, Thomas

    2012-01-01

    This paper summarizes the progress that has been made in the development of the Fission Power System Technology Demonstration Unit (TDU). The reactor simulator core and Annular Linear Induction Pump have been fabricated and assembled into a test loop at the NASA Marshall Space Flight Center. A 12 kWe Power Conversion Unit (PCU) is being developed consisting of two 6 kWe free-piston Stirling engines. The two 6 kWe engines have been fabricated by Sunpower Inc. and are currently being tested separately prior to integration into the PCU. The Facility Cooling System (FCS) used to reject convertor waste heat has been assembled and tested at the NASA Glenn Research Center (GRC). The structural elements, including a Buildup Assembly Platform (BAP) and Upper Truss Structure (UTS) have been fabricated, and will be used to test cold-end components in thermal vacuum prior to TDU testing. Once all components have been fully tested at the subsystem level, they will be assembled into an end-to-end system and tested in thermal vacuum at GRC.

  7. Metal Matrix Composite LOX Turbopump Housing Via Novel Tool-less Net-Shape Pressure Infiltration Casting Technology

    Science.gov (United States)

    Shah, Sandeep; Lee, Jonathan; Bhat, Biliyar; Wells, Doug; Gregg, Wayne; Marsh, Matthew; Genge, Gary; Forbes, John; Salvi, Alex; Cornie, James A.; hide

    2002-01-01

    Metal matrix composites (MMC) offer relatively higher specific strength, specific stiffness, lower coefficient of thermal expansion (CTE) and lower density as compared with conventional alloys. These unique properties make them very attractive for aerospace turbomachinery applications where there is ever increasing emphasis to reduce weight and cost, and to increase engine performance. Through a joint effort between NASA and Metal Matrix Cast Composites, Inc., a complex liquid oxygen (LOX) compatible turbopump housing is being redesigned and manufactured from hybrid (particulate and fibers) Aluminum MMC. To this end, a revolutionary toolless pressure infiltration casting technology is being perfected. Ceramic preforms for the composite are 3-dimensionally printed using a stereolithography file, acquired from a CAD model. The preforms are then invested into a refractory material and pressure infiltrated with liquid metal. After casting, the refractory material is washed away leaving behind a near net-shape composite part. Benefits of this process include increased composite uniformity, no mold machining, short time from design to part, properties matching traditional methods, ability to make previously impossible to manufacture parts and no size limitations with a newly developed joining technology. The results of materials, manufacturing and design optimizations, preform joining, and sub-element tests will be presented.

  8. Metal Matrix Composite LOX Turbopump Housing Via Novel Tool-less Net-Shape Pressure Infiltration Casting Technology

    Science.gov (United States)

    Shah, Sandeep; Lee, Jonathan; Bhat, Biliyar; Wells, Doug; Gregg, Wayne; Marsh, Matthew; Genge, Gary; Forbes, John; Salvi, Alex; Cornie, James A.; Munafo, Paul M. (Technical Monitor)

    2002-01-01

    Metal matrix composites (MMC) offer relatively higher specific strength, specific stiffness, lower coefficient of thermal expansion (CTE) and lower density as compared with conventional alloys. These unique properties make them very attractive for aerospace turbomachinery applications where there is ever increasing emphasis to reduce weight and cost, and to increase engine performance. Through a joint effort between NASA and Metal Matrix Cast Composites, Inc., a complex liquid oxygen (LOX) compatible turbopump housing is being redesigned and manufactured from hybrid (particulate and fibers) Aluminum MMC. To this end, a revolutionary toolless pressure infiltration casting technology is being perfected. Ceramic preforms for the composite are 3-dimensionally printed using a stereolithography file, acquired from a CAD model. The preforms are then invested into a refractory material and pressure infiltrated with liquid metal. After casting, the refractory material is washed away leaving behind a near net-shape composite part. Benefits of this process include increased composite uniformity, no mold machining, short time from design to part, properties matching traditional methods, ability to make previously impossible to manufacture parts and no size limitations with a newly developed joining technology. The results of materials, manufacturing and design optimizations, preform joining, and sub-element tests will be presented.

  9. Housing Data Base for Sustainable Housing Provision

    African Journals Online (AJOL)

    Sultan

    ATBU Journal of Environmental Technology 10, 1, June 20 I 7. 53 ... (Adedayo, 2013). It was the expectation of ... factor responsible for the increase in housing demand in the city centres as .... many architects simply discuss with the client.

  10. Silver-zinc: status of technology and applications

    Science.gov (United States)

    Karpinski, A. P.; Makovetski, B.; Russell, S. J.; Serenyi, J. R.; Williams, D. C.

    Michel Yardney and Professor Henri André developed the first practical silver-zinc battery more than 55 years ago. Since then, primary and rechargeable silver-zinc batteries have attracted a variety of applications due to their high specific energy/energy density, proven reliability and safety, and the highest power output per unit weight and volume of all commercially available batteries. Although significant improvements have been achieved on traditional systems such as lead-acid and nickel/cadmium, and in spite of the advent of new electrochemistries such as lithium-ion and nickel/metal hydride, many users still rely on silver-zinc to satisfy their most demanding and critical requirements. Over the past few years, several of the internal components have been subject to many studies which resulted in significant improvements in the battery wet life and cycle life. Specifically, these include new separator materials which offer an alternative to the cellulosic membranes, improvements to the zinc electrode that include additives that help reduce shape-change and dendritic growth, and to a lesser extent, process changes to the silver electrode and additives to the electrolyte. In comparison, the commonly used secondary systems are lead-acid, nickel/cadmium, nickel/metal hydride, and lithium-ion. Each has attributes which make them desirable for certain applications. Where low cost, high voltage, and high rate capability is required, the lead-acid battery is an obvious choice whenever size and weight are not critical. For applications requiring longer wet life, moderate rate capability, and high cycle life, nickel/cadmium or nickel/metal hydride can be used in spite of their poor charge retention and higher costs. Relatively newer systems are also available such as lithium-ion or lithium polymer technology which are preferred for their high voltage and excellent cycle life. Among the disadvantages of these systems are higher costs, limited configurations (usually

  11. Optical coordinate scanners applied for the inspection of large scale housings produced in foundry technology

    Directory of Open Access Journals (Sweden)

    M. Grzelka

    2010-01-01

    Full Text Available The paper presents possibilities of the dimensional and geometry measurement of the large scale casting details with a coordinate measuring technique. In particular, the analysis has been devoted to the measurement strategy in case of the measurement of large scale detail (larger than 1000 mm made in foundry technology, with the 3D optical scanner. The attention was paid on the possibility created by the advanced software attached to the scanner for measurement data processing. Preparation to the geometrical accuracy analysis of the measured objects consisted of the identification of particular geometrical features based on the large number of probing points, as well as the creation of the coordinate systems derived from the best-fitting algorithms which calculate the inscribed or circumscribed geometrical elements. Analysis of accuracy in every probing point has been performed through the comparison of their coordinates with nominal values set by 3D model. Application of the 3D optical coordinate scanner with advanced measurement software for the manufacturing accuracy inspection is very useful in case of large scale details produced with foundry technologies and allows to carry out full accuracy analysis of the examined detail.

  12. House technology - compact modules for passive houses. A system solution offered by craftsmen; Haustechnik - Kompaktmodule fuer Passivhaeuser. Eine Systemloesung des Handwerks

    Energy Technology Data Exchange (ETDEWEB)

    Lackenbauer, A. [Lackenbauer PassivHaustechnik, Traunstein (Germany)

    2001-02-01

    The solutions that have been available on the market so far are basically a combination of individual components, which are combined to functioning units on the individual construction sites according to methods usually applied by the installation craftsmanship. There are different constructional units within the same craftsman business. The following distinctions are made: ventilation devices, which provide the essential functions for inlet and outlet ventilation with heat recovery in a single apparatus, gas wall heating boilers, which combine the functions of a complete heating control centre in the smallest space, and e.g. solar pumps and control groups, which combine the necessary accessories for collectors and solar storage in one constructional unit. However these individual constructional units have several disadvantages. Individual manufacturers have noticed this potential and offer a compact solution for the passive house-one-family house that combines all heating, ventilation and warm water provision functions. These systems took over the market lead in the field of one-family house-passive house. (orig.) [German] Die bisher am Markt erhaeltlichen Loesungen stellen im wesentlichen eine Kombination aus Einzelteilen dar, die den im Installations-Handwerk ueblichen Verfahrensweisen entsprechend auf den Baustellen individuell zu funktionierenden Einheiten verbunden werden. Innerhalb des jeweiligen Gewerkes gibt es verschiedene Baueinheiten. Man unterscheidet Lueftungsgeraete, die die wesentlichen Funktionen zur Be- und Entlueftung mit Waermerueckgewinnung in einem Geraet zur Verfuegung stellen, Gas-Wandheizkessel, die die Funktion einer ganzen Heizzentrale auf kleinstem Raum buendeln, und z.B. Solarpumpen und Regelgruppen, die das erforderliche Zubehoer fuer die Verbindung von Kollektoren und Solarspeicher in einer Baugruppe sammeln. Diese einzelnen Bausteine haben jedoch mehrere Nachteile. Einzelne Hersteller haben das Potential erkannt und bieten eine

  13. The Effect of Technology and Socioeconomic Status on Parental Involvement at the Elementary School Level

    Science.gov (United States)

    Balsamo, Michael J.

    2013-01-01

    Evidence suggests that parents who extensively use technology and have a high socioeconomic status (SES) may become overly involved with their elementary school-aged children's education and school-related activities, an involvement which can create a lasting dependence of the children on their parents. The literature indicates high…

  14. The Effect of Technology and Socioeconomic Status on Parental Involvement at the Elementary School Level

    Science.gov (United States)

    Balsamo, Michael J.

    2013-01-01

    Evidence suggests that parents who extensively use technology and have a high socioeconomic status (SES) may become overly involved with their elementary school-aged children's education and school-related activities, an involvement which can create a lasting dependence of the children on their parents. The literature indicates high…

  15. 绿色技术在保障性住房中的应用%Application of Green Technology in Affordable Housing

    Institute of Scientific and Technical Information of China (English)

    金怡; 蒋辉; 胡捷; 项玲娜

    2015-01-01

    The current is affordable housing and green building development period, It is significant to the green building by the develop application of green technology in affordable housing .The traditional idea thinks that green building need high input,but the affordable housing have low input. This paper is discussed on the reasonable application of green technology in affordable housing from the aspects of design and construction ,to achieve the purpose of the affordable housing to achieve green building in the premise of economic increment lower requirements.%当前是保障性住房和绿色建筑大力发展的时期,绿色技术在保障性住房中的应用对绿色建筑的发展有重要意义。传统观念认为绿色需要较高的投入,这与保障性住房的低投入相矛盾。本文从设计规划和建筑施工方面对绿色技术在保障性住房中的合理应用展开阐述,使得保障性住房在产生较低的经济增量的前提下达到绿色建筑的要求。

  16. 公共租赁住房绿色建筑适用技术研究%Study on Applicable Technologies for Green Buildings of Public Rental Housing

    Institute of Scientific and Technical Information of China (English)

    杨靖

    2015-01-01

    根据国家“十二五”中长期规划,我国公共租赁住房的建设,应在成本控制的基础上,选用适用的绿色技术,达到最大限度的建筑节能及环保。文章根据公共租赁住房中的住宅和配套公建的特点,研究适用的绿色建筑技术,并将公共租赁住房中的住宅与配套公建进行整体考虑与设计,形成相应的技术目录,为公共租赁住房的绿色建筑设计提供参考。%According to the "Twelfth Five-Year" long term planning of China, the construction of Chinese public rental housing shall choose green technologies on the basis of cost-control for realizing building energy efficiency and environmental protection at the maximum degree. The paper studies applicable green building technologies according to the features of residential housing and supporting public facilities in public rental housing as well as carries out integral consideration and design on residential housing and supporting public facilities to form corresponding technical catalogue for reference in green building design of public rental housing.

  17. Technology Status and the Future of Large Deployable Antennas

    Science.gov (United States)

    Meguro, Akira; Harada, Satoshi; Ishikawa, Hironori; Tsunoda, Hiroaki; Watanabe, Mitsunobu; Mizuno, Hideki

    2002-01-01

    the number of cables in the conventional S-band antenna reflector. An equilibrium shape analysis confirms that the surface error of better than 0.4 mmRMS can be achieved. reliability in defining the difficulty index of ground deployment testing for large deployable antennas. The relationship between the index value and the accuracy of results from ground deployment testing has been estimated by deployment testing of a simple deployment truss structure under both full and micro- gravity conditions. We found that the deployment reliability of a deployable structure can not be evaluated with adequate accuracy if its size exceeds 10 m.The structure must be divided into modules ofappropriate size. Basic studies on inflatable structures and flexible patch elements for future large aperture, sophisticated direct radiation array antennas are underway. Inflatable structures, which consist of rigidized materials and flexible patch elements for feed elements, are interesting candidates. In addition to these studies, distributed sensor/actuator location, non-linear vibration control method, and optimum design methods are also being addressed. They are key technologies for high performance, highly stable, and re-configurable antenna systems.

  18. Current Status and Future Development of Integrated Geophysical Technology in China

    Institute of Scientific and Technical Information of China (English)

    HeZhanxiang

    2003-01-01

    The gap between China''s integrated geophysical technology and the world''s advanced technologies has been significantly narrowed as the result of developments in the last decade.The new technology has played a very important role in oil and gas exploration in China, especially for the purposes of targeting seismically opaque zones, decreasing exploration risk, and improving exploration efficiency in the western territories and complex areas in China. The current status and future development of non-seismic integrated geophysical teams in China is discussed.

  19. The age of alternative energies: the current status of new energy technology development

    Energy Technology Data Exchange (ETDEWEB)

    Kawaguchi, Y.

    1986-01-01

    This paper outlines Japan's Sunshine Project and presents the current status of the principal research and development programs involved. These are as follows: 1) solar energy (solar photovoltaic power generation, solar energy systems for industrial use); 2) geothermal energy (technology for geothermal exploration and excavation, hydrothermal power generation, discovery of high-temperature rock); 3) coal energy (coal liquefaction and gasification technology); 4) hydrogen energy (technology for production, transport, storage and utilization of hydrogen); 5) others (wind power and ocean thermal power generation). 7 figs., 3 tabs.

  20. Analysis and status of post-combustion carbon dioxide capture technologies.

    Science.gov (United States)

    Bhown, Abhoyjit S; Freeman, Brice C

    2011-10-15

    The Electric Power Research Institute (EPRI) undertook a multiyear effort to understand the landscape of postcombustion CO₂ capture technologies globally. In this paper we discuss several central issues facing CO₂ capture involving scale, energy, and overall status of development. We argue that the scale of CO₂ emissions is sufficiently large to place inherent limits on the types of capture processes that could be deployed broadly. We also discuss the minimum energy usage in terms of a parasitic load on a power plant. Finally, we present summary findings of the landscape of capture technologies using an index of technology readiness levels.

  1. Potassium deficiency affects water status and photosynthetic rate of the vegetative sink in green house tomato prior to its effects on source activity.

    Science.gov (United States)

    Kanai, Synsuke; Moghaieb, Reda E; El-Shemy, Hany A; Panigrahi, R; Mohapatra, Pravat K; Ito, J; Nguyen, Nguyen T; Saneoka, Hirofumi; Fujita, Kounosuke

    2011-02-01

    The potassium requirement of green house tomatoes is very high for vegetative growth and fruit production. Potassium deficiency in plants takes long time for expression of visible symptoms. The objective of this study is to detect the deficiency early during the vegetative growth and define the roles of aquaporin and K-channel transporters in the process of regulation of water status and source-sink relationship. The tomato plants were grown hydroponically inside green house of Hiroshima University, Japan and subjected to different levels of K in the rooting medium. Potassium deficiency stress decreased photosynthesis, expansion and transport of ¹⁴C assimilates of the source leaf, but the effects became evident only after diameter expansion of the growing stem (sink) was down-regulated. The depression of stem diameter expansion is assumed to be associated with the suppression of water supply more than photosynthate supply to the organ. The stem diameter expansion is parameterized by root water uptake and leaf transpiration rates. The application of aquaporin inhibitor (AgNO₃) decreased leaf water potential, stem expansion and root hydraulic conductance within minutes of application. Similar results were obtained for application of the K-channel inhibitors. These observations suggested a close relationship between stem diameter expansion and activities of aquaporins and K-channel transporters in roots. The deficiency of potassium might have reduced aquaporin activity, consequently suppressing root hydraulic conductance and water supply to the growing stem for diameter expansion and leaf for transpiration. We conclude that close coupling between aquaporins and K-channel transporters in water uptake of roots is responsible for regulation of stem diameter dynamics of green house tomato plants.

  2. A status of the activities of the NASA. Marshall Space Flight Center Combustion Devices Technology Team

    Science.gov (United States)

    Tucker, Kevin

    1992-01-01

    The Consortium for Computational Fluid Dynamics (CFD) Applications in Propulsion Technology was established to focus on computational fluid dynamics applications in propulsion. Specific areas of effort include developing the CFD technology required to address rocket propulsion issues, validating the technology, and applying the validated technology to design problems. The Combustion Devices Technology Team was formed to implement the above objectives in the broad area of combustion driven flows. In an effort to bring CFD to bear in the design environment, the team has focused its efforts on the Space Transportation Main Engine nozzle. The main emphasis has been on the film cooling scheme used to cool the nozzle wall. Benchmark problems have been chosen to validate CFD film cooling capabilities. CFD simulations of the subscale nozzle have been made. Also, CFD predictions of the base flow resulting from this type of nozzle have been made. The status of these calculations is presented along with future plans. Information is given in viewgraph form.

  3. Capture technologies: Improvements and promising developments

    NARCIS (Netherlands)

    Blomen, E.; Hendriks, C.; Neele, F.

    2009-01-01

    In this status report we want to provide a comprehensive overview of the current status and promising technologies of CO2 capture by means of a literature review, in-house knowledge and interviews. We describe the technology, bottlenecks towards implementation and potential use. The results will be

  4. Evaluating the UK House of Commons Science and Technology Committee's position on the implausible effectiveness of homeopathic treatments.

    Science.gov (United States)

    Turner, Andrew

    2017-08-01

    In 2009, the UK House of Commons Science and Technology Committee (STC) conducted an 'evidence check' on homeopathy to evaluate evidence for its effectiveness. In common with the wider literature critical of homeopathy, the STC report seems to endorse many of the strong claims that are made about its implausibility. In contrast with the critical literature, however, the STC report explicitly does not place any weight on implausibility in its evaluation. I use the contrasting positions of the STC and the wider critical literature to examine the 'implausibility arguments' against homeopathy and the place of such arguments within evidence-based medicine (EBM). I argue that the STC report undervalues its strong claims about the mechanistic plausibility of homeopathy because it relies on a misunderstanding about the role of mechanistic evidence within EBM. This is not a conclusion for a revision of the role mechanistic evidence plays within EBM, however. It is a conclusion about the inconsistency of the STC report's position towards implausibility arguments, given the evidential claims they endorse and the atypical situation that homeopathy presents. It provides a further example of the general point that mechanistic reasoning should not be seen as providing categorically lower quality evidence.

  5. 加强房屋建筑地基施工技术的分析%Analysis on strengthening housing building foundation construction technology

    Institute of Scientific and Technical Information of China (English)

    沈俊桥

    2016-01-01

    分析了房屋建筑地基施工的必要性,阐述了地基施工过程中的基本要求,从基础选择、加固作业、静压桩处理等方面,提出了加强房屋建筑地基施工技术的措施,以有效提高房屋建筑的地基承载力,保证建筑工程质量。%The paper analyzes the necessity of housing building foundation construction,describes basis foundation construction,and puts forward measures of strengthening housing building foundation construction technology from aspects of foundation selection,reinforcement,and static pile treatment,with a view to effectively improve housing building foundation bearing capacity and to guarantee building engineering quality as well.

  6. Sustainable Housing Renewal

    OpenAIRE

    M. Sitar; K. Krajnc

    2008-01-01

    Following the already proved models the sustainable planning culture is endangering several methods directed towards the needs of tenants in the existing post-war housing stock. The case-study of our project is the renewal of the multi stored building in the housing estate Metalna, Maribor/Tezno (1949). It is based on the sustainable renovation principle for the quality of sustainable housing in functional, technological and environmental point of view. According to it, the idea of the projec...

  7. The health status and well-being of low-resource, housing-unstable, single-parent families living in violent neighbourhoods in Philadelphia, Pennsylvania.

    Science.gov (United States)

    Jacoby, Sara F; Tach, Laura; Guerra, Terry; Wiebe, Douglas J; Richmond, Therese S

    2017-03-01

    The health and well-being of single-parent families living in violent neighbourhoods in US cities who participate in housing programmes is not well described. This two-phase, mixed-methods study explores the health status of families who were participants in a housing-plus programme in Philadelphia, Pennsylvania between 2011 and 2013 and the relationship between the characteristics of the neighbourhoods in which they lived and their perceptions of well-being and safety. In phase 1, data collected with standardised health status instruments were analysed using descriptive statistics and independent sample t-tests to describe the health of single parents and one randomly selected child from each parent's household in comparison to population norms. In a subset of survey respondents, focus groups were conducted to generate an in-depth understanding of the daily lives and stressors of these families. Focus group data were analysed using content analysis to identify key descriptive themes. In phase 2, daily activity path mapping, surveys and interviews of parent-child dyads were collected to assess how these families perceive their health, neighbourhood and the influence of neighbourhood characteristics on the families' day-to-day experience. Narratives and activity maps were combined with crime data from the Philadelphia Police Department to analyse the relationship between crime and perceptions of fear and safety. Phase 1 data demonstrated that parent participants met or exceeded the national average for self-reported physical health but fell below the national average across all mental health domains. Over 40% reported moderate to severe symptoms of depression. Parents described high levels of stress resulting from competing priorities, financial instability, and concern for their children's well-being and safety. Analysis of phase 2 data demonstrated that neighbourhood characteristics exert influence over parents' perceptions of their environment and how they permit

  8. Patterns of Behaviour, Group Structure and Reproductive Status Predict Levels of Glucocorticoid Metabolites in Zoo-Housed Ring-Tailed Lemurs, Lemur catta.

    Science.gov (United States)

    Smith, Tessa E; McCusker, Cara M; Stevens, Jeroen M G; Elwood, Robert W

    2015-01-01

    In ring-tailed lemurs, Lemur catta, the factors modulating hypothalamic-pituitary-adrenal (HPA) activity differ between wild and semi-free-ranging populations. Here we assess factors modulating HPA activity in ring-tailed lemurs housed in a third environment: the zoo. First we validate an enzyme immunoassay to quantify levels of glucocorticoid (GC) metabolites in the faeces of L. catta. We determine the nature of the female-female dominance hierarchies within each group by computing David's scores and examining these in relation to faecal GC (fGC). Relationships between female age and fGC are assessed to evaluate potential age-related confounds. The associations between fGC, numbers of males in a group and reproductive status are explored. Finally, we investigate the value of 7 behaviours in predicting levels of fGC. The study revealed stable linear dominance hierarchies in females within each group. The number of males in a social group together with reproductive status, but not age, influenced fGC. The 7 behavioural variables accounted for 68% of the variance in fGC. The amounts of time an animal spent locomoting and in the inside enclosure were both negative predictors of fGC. The study highlights the flexibility and adaptability of the HPA system in ring-tailed lemurs. © 2016 S. Karger AG, Basel.

  9. The Current Status of Usability Studies of Information Technologies in China: A Systematic Study

    OpenAIRE

    Lei, Jianbo; Xu, Lufei; Meng, Qun; Zhang, Jiajie; Gong, Yang

    2014-01-01

    Objectives. To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. Methods. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Results. Six hundred forty-seven publications were selected for analysis. We found ...

  10. Current status of health technology reassessment of non-drug technologies: survey and key informant interviews

    Directory of Open Access Journals (Sweden)

    Leggett Laura E

    2012-12-01

    Full Text Available Abstract Background Health Technology Reassessment (HTR is a structured, evidence-based assessment of the clinical, social, ethical and economic effects of a technology currently used in the health care system, to inform optimal use of that technology in comparison to its alternatives. Little is known about current international HTR practices. The objective of this research was to summarize experience-based information gathered from international experts on the development, initiation and implementation of a HTR program. Methods A mixed methods approach, using a survey and in-depth interviews, was adopted. The survey covered 8 concepts: prioritization/identification of potentially obsolete technologies; program development; implementation; mitigation; program championing; stakeholder engagement; monitoring; and reinvestment. Members of Health Technology Assessment International (HTAi and the International Network of Agencies for Health Technology Assessment (INAHTA formed the sampling frame. Participation was solicited via email and the survey was administered online using SurveyMonkey. Survey results were analyzed using descriptive statistics. To gather more in-depth knowledge, semi-structured interviews were conducted among organizations with active HTR programs. Interview questions were developed using the same 8 concepts. The hour-long interviews were recorded, transcribed and analyzed using constant comparative analysis. Results Ninety-five individuals responded to the survey: 49 were not discussing HTR, 21 were beginning to discuss HTR, nine were imminently developing a program, and 16 participants had programs and were completing reassessments. The survey results revealed that methods vary widely and that although HTR is a powerful tool, it is currently not being used to its full potential. Of the 16 with active programs, nine agreed to participate in follow-up interviews. Interview participants identified early and extensive stakeholder

  11. Testimony on the Economic Status of Hispanic Children and Families. Presented before the Select Committee on Children, Youth, and Families, U.S. House of Representatives, September 25, 1989.

    Science.gov (United States)

    Quiroz, Julia Teresa

    This document presents testimony delivered before the House Select Committee on Children, Youth, and Families on the economic status of Hispanic children and families in the United States. The speaker, a senior policy analyst at the National Council of La Raza, focuses on the strengths of Hispanic families, the economic challenges they face, and…

  12. Testimony on the Economic Status of Hispanic Children and Families. Presented before the Select Committee on Children, Youth, and Families, U.S. House of Representatives, September 25, 1989.

    Science.gov (United States)

    Quiroz, Julia Teresa

    This document presents testimony delivered before the House Select Committee on Children, Youth, and Families on the economic status of Hispanic children and families in the United States. The speaker, a senior policy analyst at the National Council of La Raza, focuses on the strengths of Hispanic families, the economic challenges they face, and…

  13. Worldwide Status of CCUS Technologies and Their Development and Challenges in China

    Directory of Open Access Journals (Sweden)

    H. J. Liu

    2017-01-01

    Full Text Available Carbon capture, utilization, and storage (CCUS is a gas injection technology that enables the storage of CO2 underground. The aims are twofold, on one hand to reduce the emissions of CO2 into the atmosphere and on the other hand to increase oil/gas/heat recovery. Different types of CCUS technologies and related engineering projects have a long history of research and operation in the USA. However, in China they have a short development period ca. 10 years. Unlike CO2 capture and CO2-EOR technologies that are already operating on a commercial scale in China, research into other CCUS technologies is still in its infancy or at the pilot-scale. This paper first reviews the status and development of the different types of CCUS technologies and related engineering projects worldwide. Then it focuses on their developments in China in the last decade. The main research projects, international cooperation, and pilot-scale engineering projects in China are summarized and compared. Finally, the paper examines the challenges and prospects to be experienced through the industrialization of CCUS engineering projects in China. It can be concluded that the CCUS technologies have still large potential in China. It can only be unlocked by overcoming the technical and social challenges.

  14. Mobile Technology, Cancer Prevention, and Health Status among Diverse, Low-Income Adults

    Science.gov (United States)

    Purnell, Jason Q.; Griffith, Julia; Eddens, Katherine S.; Kreuter, Matthew W.

    2014-01-01

    Purpose Characterize mobile technology ownership, use, and relationship to self-reported cancer prevention behaviors and health status in a diverse, low-income sample of callers to 2-1-1. Design Secondary analyses of cross-sectional survey data from a larger trial collected from June 2010 to December 2012. Setting United Way Missouri 2-1-1 serves 99 of 114 counties and received 166,000 calls in 2011. Subjects The respondents (baseline n = 1,898; 4-month n = 1,242) were predominantly female, non-Hispanic Black, under 50, with ≤ high school education and annual income < $20,000. Measures Cell phone ownership and use and its relationship to cancer prevention services and health status were assessed via telephone-based survey using items adapted from previous research and the BRFSS. Smartphone ownership and use were also assessed. Analysis Descriptive statistics and bivariate and multivariate associations between cell phone ownership and prevention and health status are reported. Results Three-fourths (74%) of study participants owned a cell phone and 19% owned a smartphone. Text messaging was the most popular use. Ownership was significantly associated with good to excellent health status and presence of smoke-free home policies in multivariate models. Conclusion Cell phone ownership is growing and has potential to deliver health information to low-income populations. With 16 million calls annually, the national 2-1-1 system may be a promising model and platform. PMID:24200336

  15. Housing Assistance

    Directory of Open Access Journals (Sweden)

    Emma Baker

    2013-07-01

    Full Text Available In Australia, an increasing number of households face problems of access to suitable housing in the private market. In response, the Federal and State Governments share responsibility for providing housing assistance to these, mainly low-income, households. A broad range of policy instruments are used to provide and maintain housing assistance across all housing tenures, for example, assisting entry into homeownership, providing affordability assistance in the private rental market, and the provision of socially owned and managed housing options. Underlying each of these interventions is the premise that secure, affordable, and appropriate housing provides not only shelter but also a number of nonshelter benefits to individuals and their households. Although the nonshelter outcomes of housing are well acknowledged in Australia, the understanding of the nonshelter outcomes of housing assistance is less clear. This paper explores nonshelter outcomes of three of the major forms of housing assistance provided by Australian governments—low-income mortgage assistance, social housing, and private rent assistance. It is based upon analysis of a survey of 1,353 low-income recipients of housing assistance, and specifically measures the formulation of health and well-being, financial stress, and housing satisfaction outcomes across these three assistance types. We find clear evidence that health, finance, and housing satisfaction outcomes are associated with quite different factors for individuals in these three major housing assistance types.

  16. Current status of technology development for fabrication of Indian Test Blanket Module (TBM) of ITER

    Energy Technology Data Exchange (ETDEWEB)

    Jayakumar, T., E-mail: tjk@igcar.gov.in [Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research (IGCAR), Kalpakkam 603102 (India); Rajendra Kumar, E. [TBM Division, Institute for Plasma Research (IPR), Bhat, Gandhinagar 382428 (India)

    2014-10-15

    Highlights: • Status of technology developments for Indian TBM to be installed in ITER is presented. • Procedure development for EB, laser and laser-hybrid welding of RAFM steel presented. • Filler wires for RAFM steel for TIG, NG-TIG and laser-hybrid welding have been developed. • Feasibility of production of channel plate by HIP technology has been demonstrated. - Abstract: Ever since India decided to install its Lead-Lithium Ceramic Breeder (LLCB) TBM in ITER, various technologies for fabrication of Indian TBM are being pursued by IPR and IGCAR, in collaboration with various research laboratories in India. Welding consumables for joining India specific RAFM steels (IN-RAFMS), procedures for hot isostatic pressing, electron beam welding, laser and laser-hybrid welding have been developed. Considering the complex nature and limited access available for inspection, innovative inspection procedures that involved use of phased array ultrasonic and C-scan imaging are also being pursued. This paper presents the current status of these developments and provides a roadmap for the future activities planned in realizing Indian TBM for testing in ITER.

  17. Status of Solar Generator Related Technology Development Activities Supporting the Juice Mission

    Directory of Open Access Journals (Sweden)

    Baur Carsten

    2017-01-01

    Full Text Available The paper provides an overview of the current status of several technical development activities initiated by the European Space Agency (ESA to support the JUICE mission to the Jovian system. First of all, the qualification status of the solar cells to be used in the JUICE mission will be reported. Then, the conclusions from a dedicated activity aiming at assessing the potential degradation of triple-junction solar cells upon primary discharges will be discussed. Finally, the results on the coupon tests currently running at ESA will be presented. The coupons consist of representative solar cell assemblies including coverglasses with a conductive Indium Tin Oxide (ITO layer. Dedicated coverglass grounding technologies are tested on the coupons which connect the conductive coverglass surfaces to the panel ground. It will be shown how the resistivity of the materials used in the coupons evolves upon submission to extreme thermal cycles.

  18. Autonomous Precision Landing and Hazard Avoidance Technology (ALHAT) Project Status as of May 2010

    Science.gov (United States)

    Striepe, Scott A.; Epp, Chirold D.; Robertson, Edward A.

    2010-01-01

    This paper includes the current status of NASA s Autonomous precision Landing and Hazard Avoidance Technology (ALHAT) Project. The ALHAT team has completed several flight tests and two major design analysis cycles. These tests and analyses examine terrain relative navigation sensors, hazard detection and avoidance sensors and algorithms, and hazard relative navigation algorithms, and the guidance and navigation system using these ALHAT functions. The next flight test is scheduled for July 2010. The paper contains results from completed flight tests and analysis cycles. ALHAT system status, upcoming tests and analyses is also addressed. The current ALHAT plans as of May 2010 are discussed. Application of the ALHAT system to landing on bodies other than the Moon is included

  19. RESEARCH ON INDIGENOUS BUILDING TECHNOLOGY OF COTU MINORITIES IN CENTRAL VIETNAM - Case study of traditional community houses in Thuong Quang and Thuong Lo commune, Thua Thien-Hue province -

    OpenAIRE

    2012-01-01

    The traditional community house named "Guol" is a unique architecture of Cotu minorities living upland area of central Vietnam. Two community houses in Nam Dong district, Thua Thien Hue province show the typical "Guol" and are surveyed for case studies of indigenous building technology. The building technology can be understood as their conventional design methodology and construction technique. The field research was conducted by interview and measurement to obtain the information relating t...

  20. Status quo and prospects of fishing technology of ocean fishery of China

    Institute of Scientific and Technical Information of China (English)

    LIN De-fang; GUAN Chang-tao; HUANG Wen-qiang

    2004-01-01

    报道了我国大洋渔业技术现状,评述了技术水平、发展趋势,分析渔业技术存在的问题,提出了大洋渔业可持续发展应当进行的研究课题及建议.%This paper reports the status quo of fishing technologies of ocean fishery of China, comments on technique level and development trend and the problems existed in fishing techniques. Furthermore the paper also puts forward some suggestions and research projects to make sustainable development of ocean fishery.

  1. The Development Status and Key Technologies of Solar Powered Unmanned Air Vehicle

    Science.gov (United States)

    Sai, Li; Wei, Zhou; Xueren, Wang

    2017-03-01

    By analyzing the development status of several typical solar powered unmanned aerial vehicles (UAV) at home and abroad, the key technologies involved in the design and manufacture of solar powered UAV and the technical difficulties need to be solved at present are obtained. It is pointed out that with the improvement of energy system efficiency, advanced aerodynamic configuration design, realization of high applicability flight stability and control system, breakthrough of efficient propulsion system, the application prospect of solar powered UAV will be more extensive.

  2. Status and prospect of NDT technology for nuclear energy industry in Korea

    Science.gov (United States)

    Lee, Joon Hyun

    2016-02-01

    Innovative energy technology is considered to be one of the key solutions for meeting the challenges of climate change and energy security, which is why global leaders are focusing on enhancing energy technology R&D. In accordance with the global movements to accelerate energy R&D, the Korean government has made significant investments in a broad spectrum of energy R&D programs, including energy efficiency, resources, CCS, new and renewable energy, power generation and electricity delivery, nuclear power and nuclear waste management. In order to manage government sponsored energy R&D programs in an efficient and effective way, the government established the Korea Institute of Energy technology Evaluation and Planning (KETEP) in 2009. Main activities of KETEP include developing energy technology roadmaps, planning, evaluating, and managing R&D programs, fostering experts in the field of energy, promoting international cooperation programs, gathering and analyzing energy statistics, and supporting infrastructure and commercialization. KETEP assists the Ministry of Trade, Industry and Energy in developing national R&D strategies while also working with researchers, universities, national institutes and the private sector for their successful energy technology and deployment. This presentation consists of three parts. First, I will introduce the characteristics of energy trends and mix in Korea. Then, I'll speak about the related national R&D strategies of energy technology. Finally, I'll finish up with the status and prospect of NDT technology for nuclear energy industry in Korea. The development of the on-line structural integrity monitoring systems and the related techniques in Korean nuclear power plant for the purpose of condition based maintenance is introduced. The needs of NDT techniques for inspection and condition monitoring for GEN IV including SFR, small module reactor etc., are also discussed.

  3. Nutritional status of care-dependent people with dementia in shared-housing arrangements--a one-year follow-up.

    Science.gov (United States)

    Meyer, Saskia; Gräske, Johannes; Worch, Andreas; Wolf-Ostermann, Karin

    2015-12-01

    Malnutrition in the elderly is an important nursing challenge. Persons with dementia disease are often affected by malnutrition. During recent years, shared-housing arrangements (SHA) for older care-dependent people, frequently with dementia disease, have evolved in Germany. SHA can be an alternative to traditional residential care in nursing homes. The prevalence of malnutrition in SHA is compared to the prevalence in community dwellings and lower than the prevalence of malnutrition in nursing homes. There are no scientific data about the development of the nutritional status of older care-dependent people in SHA over one year. The aim of this study is to describe the nutritional status of care-dependent people with dementia disease living in SHA and to investigate changes over a period of one year. A longitudinal study with a one-year follow-up was performed. Standardised interviews with nurses were conducted concerning nutritional status (Mini Nutritional Assessment--MNA), cognitive capacities (Mini Mental State Examination--MMSE), activities of daily living (Extended Barthel-Index--EBI) and socio-demographic characteristics. Nutritional data were available for 45 residents at baseline and 36 residents at follow-up. At baseline, 45 residents with an average age of 78.4 years living in SHA in the state of Berlin, Germany, were included in the study. Predominantly, residents were female (73.3%) and diagnosed with dementia (88.9%), with a moderate to severe cognitive impairment (MMSE: 10.8) and low daily living abilities (EBI: 33.7). Most residents (80.6%) have a risk of malnutrition regarding the MNA. The average MNA score did decline slightly within one year (t0 = 20.8 vs. t1 = 19.7). Regular screenings for malnutrition using validated standardised assessments, which are easy to apply, should be implemented in SHA to avoid nutritional and health-related problems arising from malnutrition. Flexible structures for care, as in SHA, can facilitate coping with

  4. Nordic Housing Enabler

    DEFF Research Database (Denmark)

    Helle, Tina; Brandt, Åse

    2009-01-01

    Development and reliability testing of the Nordic Housing Enabler – an instrument for accessibility assessment of the physical housing. Tina Helle & Åse Brandt University of Lund, Health Sciences, Faculty of Medicine (SE) and University College Northern Jutland, Occupational Therapy department (DK......). Danish Centre for Assistive Technology. Abstract. For decades, accessibility to the physical housing environment for people with functional limitations has been of interest politically, professionally and for the users. Guidelines and norms on accessible housing design have gradually been developed......, however, the built environment shows serious deficits when it comes to accessibility. This study addresses development of a content valid cross-Nordic version of the Housing Enabler and investigation of inter-rater reliability, when used in occupational therapy practice. The instrument was translated from...

  5. Status of combustion-modification technology for utility-boiler NO/sub x/ control

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    This report documents significant developments in the subject area of combustion modifications as applied to coal-fired utility boilers. The primary emphasis is on the status of NO/sub x/ control technology, but related topics, such as boiler corrosion and hazardous emissions during modified-combustion operation, are also discussed. This report is intended as a complement to the 1977 Assessment of NO/sub x/ Control Technology for Coal-Fired Utility Boilers (ANL/ECT-3, Appendix D). A synopsis of recent NO/sub x/ field-test programs undertaken by the U.S. Environmental Protection Agency (EPA) and the Electric Power Research Institute (EPRI) is presented along with a status report on the major boiler manufacturers' low-NO/sub x/ burner/boiler development efforts. Because of concerns that low-NO/sub x/ operating modes may increase boiler-tubewall corrosion and increase polycyclic-organic-matter (POM) and SO/sub 3/ emissions, discussions of recent test programs and analytical studies on these topics are also included.

  6. 太阳能技术在“绿色凹宅”中的应用%Application of Solar Energy Technology in Green Concave House

    Institute of Scientific and Technical Information of China (English)

    莫理莉

    2014-01-01

    This paper introduced the application of solar energy technology in green concave house.The grid-connection photovoltaic power generation was used,which sent the redundant power back to the power network.The photovoltaic solar-thermal integrated solar panels provided the output of electricity and daily at the same time.The smart home system provided the comfortable environment for green concave house.The green concave house is a successful and low energy consumption example,which could provide references for the area of abundant solar energy and dispersal residence.%介绍了太阳能技术在“绿色凹宅”中的应用。采用的并网型太阳能光伏发电系统,当有余电时可回馈电网。铺设的光伏光热一体化太阳能板,在电力输出的同时提供生活热水。智能家居系统给“绿色凹宅”提供舒适的环境。“绿色凹宅”是一个比较成功的环保、低能耗的住宅实例,对太阳能资源丰富而又居住分散的地区有很好的借鉴意义。

  7. Technology Solutions Case Study: Sealed Crawl Space with Integrated Whole-House Ventilation in a Cold Climate

    Energy Technology Data Exchange (ETDEWEB)

    W. Zoeller, J. Williamson, and S. Puttagunta

    2015-09-01

    The Building America team Consortium for Advanced Residential Buildings (CARB) investigated a hybrid ventilation method that included the exhaust air from the crawl space as part of an ASHRAE 62.2-compliant whole-house ventilation strategy. The CARB team evaluated this hybrid ventilation method through long-term field monitoring of temperature, humidity, and pressure conditions within the crawl spaces of two homes (one occupied and one unoccupied) in New York state.

  8. Recycling of waste printed circuit boards: a review of current technologies and treatment status in China.

    Science.gov (United States)

    Huang, Kui; Guo, Jie; Xu, Zhenming

    2009-05-30

    From the use of renewable resources and environmental protection viewpoints, recycling of waste printed circuit boards (PCBs) receives wide concerns as the amounts of scrap PCBs increases dramatically. However, treatment for waste PCBs is a challenge due to the fact that PCBs are diverse and complex in terms of materials and components makeup as well as the original equipment's manufacturing processes. Recycle technology for waste PCBs in China is still immature. Previous studies focused on metals recovery, but resource utilization for nonmetals and further separation of the mixed metals are relatively fewer. Therefore, it is urgent to develop a proper recycle technology for waste PCBs. In this paper, current status of waste PCBs treatment in China was introduced, and several recycle technologies were analyzed. Some advices against the existing problems during recycling process were presented. Based on circular economy concept in China and complete recycling and resource utilization for all materials, a new environmental-friendly integrated recycling process with no pollution and high efficiency for waste PCBs was provided and discussed in detail.

  9. [Surveying the status of continuous blood purification technology application in Chinese pediatric intensive care unit].

    Science.gov (United States)

    Li, Leilei; Lu, Guoping

    2014-03-01

    To learn application status of continuous blood purification (CBP) in pediatric intensive care unit (PICU), to provide reference to promote the development of CBP technology. The survey of CBP application was conducted using questionnaire in 40 hospitals providing intensive care, which included children's hospitals and the pediatric sections of general hospitals from 28 provinces/municipalities/autonomous regions in China during March to July of 2012. Totally 38 hospital replied, 25 hospitals carried out CBP technology, first carried out in 1997, the median year was 2008, 21 hospitals' PICU could independently carry out CBP device, 18 hospitals had the nurses who could professionally operate, routinely maintain the device. Continuous veno-venous hemodiafiltration was the largest implementation mode of CBP, accounting for 51.9%. Twenty-three hospitals used ordinary heparin, and 2 hospitals used low molecular weight heparin; 21 hospitals chose activated partial thromboplastin time as the coagulation testing, due to lack of equipment, only four hospitals chose activated clotting time as coagulation testing. Only 3 hospitals could apply before and after dilution joint technology. Kidney failure is still the disease accounting for the highest proportion of diseases requiring CBP application, accounting for 38.1%, followed by sepsis, 19.1%, drug poisoning 16.7%. CBP started 10 years ago, and got attention and promotion nearly five years ago in China, but the associated personnel, equipment were inadequate, anticoagulation, before and after dilution and other technical applications were not complete enough, high volume hemofiltration mode was seldom used.

  10. The Health Impact of Urban Poor Housing and Environmental Conditions

    OpenAIRE

    Solon, Orville C.

    1989-01-01

    How does housing affect households’ health status? How does housing interact with other health inputs? What trade-offs exist between housing and medical care, housing and education and housing and nutrition? It is hoped that from this paper, other efforts towards the resolution of these questions shall be initiated.

  11. Status of the technologies for the production of the Cherenkov Telescope Array (CTA) mirrors

    CERN Document Server

    Pareschi, G; Baba, H; Bähr, J; Bonardi, A; Bonnoli, G; Brun, P; Canestrari, R; Chadwick, P; Chikawa, M; Carton, P -H; de Souza, V; Dipold, J; Doro, M; Durand, D; Dyrda, M; Förster, A; Garczarczyk, M; Giro, E; Glicenstein, J -F; Hanabata, Y; Hayashida, M; Hrabovski, M; Jeanney, C; Kagaya, M; Katagiri, H; Lessio, L; Mandat, D; Mariotti, M; Medina, C; Michałowski, J; Micolon, P; Nakajima, D; Niemiec, J; Nozato, A; Palatka, M; Pech, M; Peyaud, B; Pühlhofer, G; Rataj, M; Rodeghiero, G; Rojas, G; Rousselle, J; Sakonaka, R; Schovanek, P; Seweryn, K; Schultz, C; Shu, S; Stinzing, F; Stodulski, M; Teshima, M; Travniczek, P; van Eldik, C; Vassiliev, V; Wiśniewski, Ł; Wörnlein, A; Yoshida, T

    2013-01-01

    The Cherenkov Telescope Array (CTA) is the next generation very high-energy gamma-ray observatory, with at least 10 times higher sensitivity than current instruments. CTA will comprise several tens of Imaging Atmospheric Cherenkov Telescopes (IACTs) operated in array-mode and divided into three size classes: large, medium and small telescopes. The total reflective surface could be up to 10,000 m2 requiring unprecedented technological efforts. The properties of the reflector directly influence the telescope performance and thus constitute a fundamental ingredient to improve and maintain the sensitivity. The R&D status of lightweight, reliable and cost-effective mirror facets for the CTA telescope reflectors for the different classes of telescopes is reviewed in this paper.

  12. The efficacy of innovative technology in improving the performance of low cost housing in South Africa: A case study

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn

    2017-08-01

    Full Text Available objective measures such as environmental monitoring, space measurement and cost analysis (Preiser et al 1988: Aitken 1998). POE proponents note that a POE usually includes a mix of quantitative and qualitative techniques. More recently, PoEs tend... Water Heater (SWH) of 100 litre capacity was installed at each house. Optimum orientation could be achieved by fitting an adjustable bracket to the ridge of the roof. The heated water is piped to the kitchen sink and the shower. The hand wash basin...

  13. Key Technologies and Pilot Exercise of Green Buildings Research on Indemnificatory Housing in Shanghai%上海地区保障性住房绿色建筑关键技术及示范应用研究

    Institute of Scientific and Technical Information of China (English)

    张超

    2015-01-01

    保障性住房的大力建设为绿色建筑的推广提供了良好的契机,结合保障性住房绿色建筑的设计原则,从节地、节能、节水、节材、室内环境及运营管理6个方面,提出适用于上海地区保障性住房的绿色建筑技术,同时选取动迁安置住房、公共租赁住房及保障性住房中的配套公建三类保障性住房项目进行示范应用。%Vigorously construction of indemnificatory housing provides a good opportunity for the promotion of green building. Based on the green design principle of indemnificatory housing, green technologies and implementary points suitable for indemnificatory housing are confirmed, and the green technologies include land saving, energy saving, water saving, material saving, indoor environment and operation management. Three types of indemniifcatory housing are also selected to demonstrate the application, which include resettlement housing, pubic rental housing and the utility of affordable housing.

  14. MHD Technology Transfer, Integration and Review Committee. Seventh semi-annual status report, April 1991--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    1993-02-01

    This seventh semi-annual status report of the MHD Technology Transfer, Integration and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1991 through September 1991. It includes a summary and minutes of the General Committee meeting, progress summaries of ongoing POC contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months. The meeting included test plan with Western coal, seed regeneration economics, power management for the integrated topping cycle and status of the Clean Coal Technology Proposal activities. Appendices cover CDIF operations HRSR development, CFFF operations etc.

  15. MHD Technology Transfer, Integration and Review Committee. Seventh semi-annual status report, April 1991--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    1993-02-01

    This seventh semi-annual status report of the MHD Technology Transfer, Integration and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1991 through September 1991. It includes a summary and minutes of the General Committee meeting, progress summaries of ongoing POC contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months. The meeting included test plan with Western coal, seed regeneration economics, power management for the integrated topping cycle and status of the Clean Coal Technology Proposal activities. Appendices cover CDIF operations HRSR development, CFFF operations etc.

  16. VRdose: an exposure dose evaluation system based on virtual reality technology - current status and future possibilities

    Energy Technology Data Exchange (ETDEWEB)

    Iguchi, Yukihiro; Louka, Michael; Johnsen, Terje

    2004-07-01

    The Fugen Nuclear Power Station (NPS) was shut down permanently in March 2003, and preparatory activities are underway to decommission the Fugen NPS. It is necessary to accomplish the decommissioning economically and rationally by optimizing the workload, exposure dose and waste mass. This is important at the planning stage of the decommissioning. Virtual reality (VR) technology may prove beneficial to this process with regard to minimizing the workers' radiation exposure as well as contributing towards achieving efficient use of manpower. It could also be a valuable tool in the actual dismantling phase. In addition to this, VR provides an effective medium in presentations for public acceptance as well as for communication with relevant engineers. The VRdose project conducted by Japan Nuclear Cycle Development Institute (JNC) and Halden Virtual Reality Centre is doing research and development of VR technology for use in the decommissioning process at the Fugen NPS. This is technically an extensive project, touching on many of the present challenges in the VR area such as visual simulation and animation, interaction with objects in a virtual environment and scenario generation and optimisation. This paper describes the present status and future of the system. (Author)

  17. The current status of usability studies of information technologies in China: a systematic study.

    Science.gov (United States)

    Lei, Jianbo; Xu, Lufei; Meng, Qun; Zhang, Jiajie; Gong, Yang

    2014-01-01

    To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Six hundred forty-seven publications were selected for analysis. We found that in China the literature on usability in the field of information technology began in 1994 and increased thereafter. The usability definitions from ISO 9241-11:1998 and Nielsen (1993) have been widely recognized and cited. Authors who have published several publications are rare. Fourteen journals have a publishing rate over 1%. Only nine publications about HIT were identified. China's usability research started relatively late. There is a lack of organized research teams and dedicated usability journals. High-impact theoretical studies are scarce. On the application side, no original and systematic research frameworks have been developed. The understanding and definition of usability is not well synchronized with international norms. Besides, usability research in HIT is rare. More human and material resources need to be invested in China's usability research, particularly in HIT.

  18. The Current Status of Usability Studies of Information Technologies in China: A Systematic Study

    Directory of Open Access Journals (Sweden)

    Jianbo Lei

    2014-01-01

    Full Text Available Objectives. To systematically review and analyze the current status and characteristics of usability studies in China in the field of information technology in general and in the field of healthcare in particular. Methods. We performed a quantitative literature analysis in three major Chinese academic databases and one English language database using Chinese search terms equivalent to the concept of usability. Results. Six hundred forty-seven publications were selected for analysis. We found that in China the literature on usability in the field of information technology began in 1994 and increased thereafter. The usability definitions from ISO 9241-11:1998 and Nielsen (1993 have been widely recognized and cited. Authors who have published several publications are rare. Fourteen journals have a publishing rate over 1%. Only nine publications about HIT were identified. Discussions. China’s usability research started relatively late. There is a lack of organized research teams and dedicated usability journals. High-impact theoretical studies are scarce. On the application side, no original and systematic research frameworks have been developed. The understanding and definition of usability is not well synchronized with international norms. Besides, usability research in HIT is rare. Conclusions. More human and material resources need to be invested in China’s usability research, particularly in HIT.

  19. American Houses

    Institute of Scientific and Technical Information of China (English)

    张梦华

    2004-01-01

    American houses usually have private kitchens,a living room and sometimes separate areas for eating and watching television,A house usually has its own mailbox,a yard with plants or perhaps a lawn,and a place to store garbage out of sight.

  20. Clay Houses

    Science.gov (United States)

    Pedro, Cathy

    2011-01-01

    In this article, the author describes a project designed for fourth-graders that involves making clay relief sculptures of houses. Knowing the clay houses will become a family heirloom makes this lesson even more worth the time. It takes three classes to plan and form the clay, and another two to underglaze and glaze the final products.

  1. 原竹预制构件房屋设计与制造技术%Design and manufacture technology of prefabricated bamboo house

    Institute of Scientific and Technical Information of China (English)

    高黎; 王正; 王戈; 程海涛

    2012-01-01

    This paper introduces a design and manufacture technology of prefabricated modular bamboo house, which can meet the modern residential requirements. Firstly,Moso bamboo ( Phyllostachys pubescens) was conditioned to approximate constant mass in atmospheric conditions,then main physical-mechanical properties were tested and design stresses were calculated. After that,modular construction components including trusses and walls were assembled by using special connections and joints to combine and reinforce bamboo together. The truss was tested safe enough under specified load; lateral bearing capacity of the wall was 0. 78 t and could be used as load-bearing wall in two-storey building. Based on the experiments,a modular bamboo house was built up with the designed components. The results show that it is technically feasible to use bamboo as main materials in modern prefabricated house.%以原竹为主要原料设计与制造符合现代居住要求的预制构件房屋,内容包括毛竹的处理与设计强度计算,建筑构件的连接、模块化设计与性能测试,以及预制构件房屋的建造等。结果表明:屋架在实际使用载荷下具有足够的安全性能;墙体的抗侧承载力为0.78t,可用作1—2层住宅承重墙体。通过建设示范房屋证明利用原竹进行现代房屋的设计建造是完全可行的。

  2. 75 FR 8393 - Housing Counseling Training Program

    Science.gov (United States)

    2010-02-24

    ... URBAN DEVELOPMENT Housing Counseling Training Program AGENCY: Office of the Chief Information Officer... forms of information technology, e.g., permitting electronic submission of responses. This notice also lists the following information: Title of Proposal: Housing Counseling Training Program. OMB...

  3. New Whole-House Solutions Case Study: Technology Solutions for New Manufactured Homes, Idaho, Oregon, and Washington

    Energy Technology Data Exchange (ETDEWEB)

    BA-PIRC

    2013-11-01

    The Building America Partnership for Improved Residential Construction, the Bonneville Power Administration (BPA), and Northwest Energy Works (NEW), the current Northwest Energy Efficient Manufactured Housing Program (NEEM) administrator, have been collaborating to conduct research on new specifications that would improve on the energy requirements of a NEEM home. In its role as administrator, NEW administers the technical specs, performs research and engineering analysis, implements ongoing construction quality management procedures, and maintains a central database with home tracking. This project prototyped and assessed the performances of cost-effective high performance building assemblies and mechanical systems that are not commonly deployed in the manufacturing setting. The package of measures is able to reduce energy used for space conditioning, water heating and lighting by 50 percent over typical manufactured homes produced in the northwest.

  4. New Whole-House Solutions Case Study: Technology Solutions for New Manufactured Homes, Idaho, Oregon, and Washington

    Energy Technology Data Exchange (ETDEWEB)

    BA-PIRC

    2013-11-01

    The Building America Partnership for Improved Residential Construction, the Bonneville Power Administration (BPA), and Northwest Energy Works (NEW), the current Northwest Energy Efficient Manufactured Housing Program (NEEM) administrator, have been collaborating to conduct research on new specifications that would improve on the energy requirements of a NEEM home. In its role as administrator, NEW administers the technical specs, performs research and engineering analysis, implements ongoing construction quality management procedures, and maintains a central database with home tracking. This project prototyped and assessed the performances of cost-effective high performance building assemblies and mechanical systems that are not commonly deployed in the manufacturing setting. The package of measures is able to reduce energy used for space conditioning, water heating and lighting by 50 percent over typical manufactured homes produced in the northwest.

  5. Technology System of Low Energy Housing of Water Town in Southern Bank of Yangze River Based on SI System

    Institute of Scientific and Technical Information of China (English)

    WeiJu Yang; Qing Gao; Jun Wang

    2014-01-01

    Development of new vernacular dwelling of water town in the southern bank of the Yangze River is an important approach to improve rural appearance, infrastructure, quality of life, and to realize new urbanization of this area. How would this process to inherit the quintessence of traditional local⁃style dwelling as well as integrate with low energy consumption technology is also an important problem due to the valuable Chinese traditional architectural culture in this area. Taking SI system as breaking point, this paper analyzes the green ecological characteristics of traditional residence in the south of the lower reaches of the Yangze River, discusses the current residential technology of low energy consumption, and proposes the low energy consumption residential technology integration system in the south of the lower reaches of the Yangze River. Based on this, this paper takes the SDC2013 entry “solark” as a practical application case study and further expounds the prospects of this technology system.

  6. 地基处理技术在房屋建筑施工中的运用%Application of Foundation Treatment Technology in Housing Construction

    Institute of Scientific and Technical Information of China (English)

    周守鹏

    2015-01-01

    作为房屋建筑施工质量的基础保障,地基处理在现阶段仍未取得良好的效果。主要对房屋建筑施工地基处理基本概述、常见地基处理技术以及现代施工中采用的地基处理新方法进行了探析。%As the foundation for the construction quality of housing construction, the foundation treatment has not achieved good effect at this stage. This paper mainly on the building foundation treatment of building foundation, common ground treatment technology and the modern construction of the foundation treatment method of new method.

  7. CDBG Housing Activity

    Data.gov (United States)

    Department of Housing and Urban Development — CDBG activity related to housing, including multifamily rehab, housing services, code enforcement, operation and repair of foreclosed property and public housing...

  8. Status of teaching elementary science for English learners in science, mathematics and technology centered magnet schools

    Science.gov (United States)

    Han, Alyson Kim

    According to the California Commission on Teacher Credentialing (2001), one in three students speaks a language other than English. Additionally, the Commission stated that a student is considered to be an English learner if the second language acquisition is English. In California more than 1.4 million English learners enter school speaking a variety of languages, and this number continues to rise. There is an imminent need to promote instructional strategies that support this group of diverse learners. Although this was not a California study, the results derived from the nationwide participants' responses provided a congruent assessment of the basic need to provide effective science teaching strategies to all English learners. The purpose of this study was to examine the status of elementary science teaching practices used with English learners in kindergarten through fifth grade in public mathematics, science, and technology-centered elementary magnet schools throughout the country. This descriptive research was designed to provide current information and to identify trends in the areas of curriculum and instruction for English learners in science themed magnet schools. This report described the status of elementary (grades K-5) school science instruction for English learners based on the responses of 116 elementary school teachers: 59 grade K-2, and 57 grade 3-5 teachers. Current research-based approaches support incorporating self-directed learning strategy, expository teaching strategy, active listening strategies, questioning strategies, wait time strategy, small group strategy, peer tutoring strategy, large group learning strategy, demonstrations strategy, formal debates strategy, review sessions strategy, mediated conversation strategy, cooperative learning strategy, and theme-based instruction into the curriculum to assist English learners in science education. Science Technology Society (STS) strategy, problem-based learning strategy, discovery learning

  9. The Helpful House

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    Many everyday tasks are difficult—even impossible for people confined to wheelchairs.Now a unique house near Baltimore,Md., demonstrates how technology can make a building truly accessible. Developed by Volunteers for Medical Engineering in conjunction with several nonprofit organizations, Future Home takes advantage of off-the-shelf electronic controls that operate nearly all electrical and mechanical systems.

  10. Smart Houses and Uncomfortable Homes.

    Science.gov (United States)

    Alm, Norman; Arnott, John

    2015-01-01

    In order for smart houses to achieve acceptance from potential beneficiaries they will need to match the users' expectation that their house is also their home, with the sense of privacy and control that this implies. Designers of this technology will need to be aware of findings in this regard from fields such as architecture and design ethnography.

  11. Phase Change Materials: Technology Status and Potential Defence Applications (Review Papers

    Directory of Open Access Journals (Sweden)

    Ravindra Kumar

    2011-10-01

    Full Text Available Phase change materials (PCM are being utilised world over for energy storage and temperature smoothening applications. Defence Laboratory Jodhpur (DLJ has initiated a R&D programme to apply PCM in solving many heat related problems being faced by Indian forces during desert operations specially failure of mission-critical components. Under the programme, special organic PCM (Patent application no. 2258/DEL/2007 and low melting metal alloys have been developed well tuned to desert diurnal cycle. The PCM panels, when applied as an internal lining in buildings, structures and vehicles can moderate the extreme temperature within human tolerable range (below 40 °C without the use of any external power for cooling. The panels can also act as power saver in air conditioned buildings. A cool vest has also been developed with chargeable PCM packs to provide comfortable microenvironment to a soldier on field duty (below 30 °C for 2-3 hrs. To improve reliability of mission critical electronic instruments during desert operation, technology of absorptive PCM heat sinks is under development at DLJ. The special heat sink will absorb heat generated by component for critical mission (up to 1 hr independent of environment temperature and thus ensure smooth functioning of critical components even in extreme hot conditions. In present paper status of PCM technology world over has been reviewed along with the brief account of research on PCM at DLJ.Defence Science Journal, 2011, 61(6, pp.576-582, DOI:http://dx.doi.org/10.14429/dsj.61.363

  12. Housing and Health: The relationship between housing conditions ...

    African Journals Online (AJOL)

    okanlawon

    2011-10-22

    Oct 22, 2011 ... Department of Architecture, Ladoke Akintola University of Technology, P. M. B. ... that the quality of housing can make a big difference in the extent of, and costs related to, ... the survey and the subsequent analyses of data.

  13. Water-saving Technologies, Solar Green House and Ecological Rehabilitation in Minqin Oasis of Gansu Province, China

    Institute of Scientific and Technical Information of China (English)

    Tao Weichun; Shi Minjun; Zhao Xuetao

    2008-01-01

    Land degradation and desertification have become severe environmental problems in arid areas due to excessive use of water resources. It is urgent to reduce agricultural water use for ecological rehabilitation, which may result in a decrease in agricultural production and farmer's welfare. This paper focused on the impacts of some main measures including extensions of watersaving irrigation, expanding solar green house and increasing offfarm employment, which are generally recognized to be important to alleviate water shortage and poverty. A bio-economic model is applied taking Minqin Oasis in Gansu Province as a case study site. Simulation results showed that the effect of expanding solar greenhouse was more positive than other ones so it drew more attention. On the view of the different effects between each irrigation zone, mixed policy patterns suitable for them are suggested. In Baqu, expanding solar greenhouse should be the most important, auxiliary with encouraging pipe irrigation. Inversely, with regard to Quanshan, the major attention should be paid to subsidy for pipe irrigation and it would be better to supply the off-farm employment opportunities to the households in Huqu, where the expanding of solar greenhouse should also be summoned. Finally, it should be noted that farmer's income would only resume to 90% of the current level in the short run by putting more effort into local policies. Thus, the ecological compensation is needed to ensure farmer's welfare.

  14. Relative benefits of technology and occupant behaviour in moving towards a more energy efficient, sustainable housing paradigm

    Energy Technology Data Exchange (ETDEWEB)

    Pilkington, Brian, E-mail: bpilkington@plymouth.ac.uk [Energy and Sustainability in the Built Environment, Reynolds Building, University of Plymouth, Drake Circus, Plymouth PL4 8AA (United Kingdom); Roach, Richard, E-mail: richard.roach@interserve.com [Interserve Project Services Ltd. (United Kingdom); Perkins, James, E-mail: artsresearch@plymouth.ac.uk [C/O Environmental Building Group, University of Plymouth (United Kingdom)

    2011-09-15

    Much focus is given to the energy efficiency of dwellings, in policy and regulation, in pursuance of reduced CO{sub 2} emissions for sustainability. This article examines a terrace of 6 similar, passive solar dwellings with sunspaces and the effects that occupants' behaviours have on their energy efficiency. It was found that average annual space heating demand was less than expected, indicating potential benefits from measuring passive solar gains as a form of renewable energy. Space heating demand per person varied by a factor of up to 14 between dwellings dependent on occupant behaviour. Further evidence showed a factor of 45 possible. Significant behaviours in this dwelling type were identified. A second study used 31 personal ecological footprint (PEF) accounts to assess the significance of dwelling energy efficiency in terms of environmental sustainability. A comparison was made between residents of contemporary eco-homes and practising permaculturists occupying a range of traditional house types. It was found that the PEF of the average eco-home dweller was 1.6 times higher than that of the permaculturists. It is argued that improved education for sustainability would be a more efficient way to reduce domestic energy demand than currently recognised. - Highlights: > Quantifies improvements to dwelling energy efficiency from behaviour and education. > Assesses balance of dwelling energy efficiency and sustainability. > Suggests education for sustainability be used more to reduce energy demand. > Indicates research directions to assess budgets for education in sustainability. > Identifies significant behaviour affecting energy efficiency with sunspace use.

  15. Passive houses in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Halse, Andreas

    2008-12-15

    The paper analyzes the introduction of passive houses in the Norwegian house market. Passive houses are houses with extremely low levels of energy consumption for heating, and have not yet been built in Norway, but have started to enter the market in Germany and some other countries. The construction sector is analyzed as a sectoral innovation system. The different elements of the innovation system are studied. This includes government agencies, producers, consumers, finance and education. The analysis shows that passive and low-energy houses are on the verge of market breakthrough. This can partly be explained by economic calculations, and partly by processes of learning and change in the institutional set-up of the sector. The construction sector is a sector characterized by low innovative intensity and little interaction between different agents. Those working to promote passive houses have to some extent managed to cope with these challenges. This has happened by breaking away from the traditional focus of Norwegian energy efficiency policies on technology and the economically rational agents, by instead focusing on knowledge and institutional change at the level of the producers. (Author)

  16. Biotechnology: Role of Institutional Biosafety Committees. Briefing Report to the Chairman, Committee on Science, Space and Technology, House of Representatives.

    Science.gov (United States)

    General Accounting Office, Washington, DC. Resources, Community, and Economic Development Div.

    This report was developed to address institutional biosafety committees' implementation of federal guidelines applicable to the environmental release of genetically engineered organisms. These committees are from universities, companies, and other organizations that are using recombinant DNA technology in their laboratories. The committees are…

  17. White House

    Science.gov (United States)

    ... Strong Again Rebuilding America’s Infrastructure Repeal and Replace Obamacare Standing Up For Our Law Enforcement Community Trade ... People Petitions Contact the White House Get Involved Obamacare: Share Your Story Getting Americans Back to Work ...

  18. Conformal house

    DEFF Research Database (Denmark)

    Ryttov, Thomas Aaby; Sannino, Francesco

    2010-01-01

    fixed point. As a consistency check we recover the previously investigated bounds of the conformal windows when restricting to a single matter representation. The earlier conformal windows can be imagined to be part now of the new conformal house. We predict the nonperturbative anomalous dimensions...... at the infrared fixed points. We further investigate the effects of adding mass terms to the condensates on the conformal house chiral dynamics and construct the simplest instanton induced effective Lagrangian terms...

  19. Status of an advanced radioisotope space power system using free-piston Stirling technology

    Energy Technology Data Exchange (ETDEWEB)

    White, M.A,; Qiu, S.; Erbeznik, R.M.; Olan, R.W.; Welty, S.C.

    1998-07-01

    This paper describes a free-piston Stirling engine technology project to demonstrate a high efficiency power system capable of being further developed for deep space missions using a radioisotope (RI) heat source. The key objective is to develop a power system with an efficiency exceeding 20% that can function with a high degree of reliability for 10 years or longer on deep space missions. Primary issues being addressed for Stirling space power systems are weight and the vibration associated with reciprocating pistons. Similar weight and vibration issues have been successfully addressed with Stirling cryocoolers, which are the accepted standard for cryogenic cooling in space. Integrated long-life Stirling engine-generator (or convertor) operation has been demonstrated by the terrestrial Radioisotope Stirling Generator (RSG) and other Stirling Technology Company (STC) programs. Extensive RSG endurance testing includes more than 40,000 maintenance-free, degradation-free hours for the complete convertor, in addition to several critical component and subsystem endurance tests. The Stirling space power convertor project is being conducted by STC under DOE Contract, and NASA SBIR Phase II contracts. The DOE contract objective is to demonstrate a two-convertor module that represents half of a nominal 150-W(e) power system. Each convertor is referred to as a Technology Demonstration Convertor (TDC). The ultimate Stirling power system would be fueled by three general purpose heat source (GPHS) modules, and is projected to produce substantially more electric power than the 150-watt target. The system is capable of full power output with one failed convertor. One NASA contract, nearing completion, uses existing 350-W(e) RG-350 convertors to evaluate interactivity of two back-to-back balanced convertors with various degrees of electrical and mechanical interaction. This effort has recently provided the first successful synchronization of two convertors by means of parallel

  20. European accomplishments in regulation of the family status of the child conceived by artificial reproduction technologies

    Directory of Open Access Journals (Sweden)

    Kovaček-Stanić Gordana

    2015-01-01

    Full Text Available In this paper, the author analyzes family status of the child conceived by artificial reproduction technologies using the following treatments: homologues artificial insemination, heterologus artificial insemination (artificial insemination by donor, ovum donation, embryo donation and surrogate motherhood. One specific situation of homologues artificial insemination is posthumous insemination, insemination after the death of the husband/partner. This procedure is allowed in, for instance, United Kingdom, but not allowed in France, Switzerland, and Italy. Considering genetics elements in this situation there is no doubt on fatherhood - father is a man whose sperm is used for insemination, regardless of the fact if frozen sperm or frozen embryo is used in the procedure. Nevertheless, until 2008 in United Kingdom, the husband/partner was not considered as legal father, because of the fact that the child was born after his death. Heterologous artificial insemination could be used in three different situations. First, when subjects are spouses or unmarried partners of different sexes. Second, when subjects are spouses or unmarried partners of the same sex and the third if a single woman is an only subject. Most recent procedure is the one in which subjects are spouses or unmarried partners of the same sex, specifically two women. This procedure is allowed in the United Kingdom and Sweden. In these legislatures, there is a rule that the woman who delivers the child is legal mother, and her spouse/partner is a second parent of the child. The most recent procedure of egg donation is a donation of only a part of an egg, mitochondrial DNA. In this case, there are in fact three genetic parents of the child: two genetic mothers and a father. Legally, the child has one mother (the woman who delivers a child and a father. One of potential outcomes of the recent research is the ability to create human embryo without any male genetic contribution - by

  1. Energy efficient low-income housing demonstration with Houston Habitat for Humanity. Final status report, October 1, 1995--September 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-30

    Using DOE grant funds, the Alliance to Save Energy developed and managed an award-winning low-income housing demonstration in cooperation with Houston Habitat for Humanity at the 1996 and 1997 annual NAHB Builders Show in Houston, Texas. Using a unique group of over 30 national, state and local partners, the energy design of Houston Habitat houses was permanently upgraded to the Energy Star Homes Program threshold. Meeting Energy Star Homes Program criteria, the partner design team increased the level of efficiency approximately 30% over the 1992 Model Energy Code. This innovative design using commercially available materials added approximately $1,400 in cost-effective energy upgrades with an estimated payback of less than 8 years. The 30 public-private partners successfully demonstrated energy and resource efficient housing techniques to the 65,000 NAHB home show attendees and the over 3,000 Habitat affiliates. This project resulted in the Houston Habitat affiliate becoming the nation`s first low-income Energy Star Homes Program home builder. By the year 2000, Houston Habitat anticipates building over 500 homes to this new level of efficiency as well as set an example for other Habitat affiliates nationwide to follow. The 1997 demonstration house utilized an all-women volunteer builders team to construct a 3 bedroom home in Houston Habitat`s Woodglen Subdivision. Energy consumption was remotely metered by Texas A and M.

  2. Thor (Total-house waste recycling). A new technology for recovery of urban wastes in refuse derived fuel (RDF); Thor (Total-house waste recycling). Una tecnologia alternativa per la conversione di rifiuti solidi urbani in combustibile da rifiuto (CDR)

    Energy Technology Data Exchange (ETDEWEB)

    Plescia, P.; Mauro, E.; Benedetti, S.; Gizi, D. [Consiglio Nazionale delle Ricerche, Istituto Trattamento Minerali, Monterotondo, Rome (Italy)

    2001-06-01

    This work presents the new THOR technology (Total-House waste recycling) for the treatment of municipal solid wastes (RSU) and their conversion in Refuse Derived Fuel (RDF). THOR technology is based on the use of a mechanochemical reactor, which is high speed mill with an elevate milling mass/milled material ratio, applied to the wet and dry organic component of refuse. Transformations induced from mechanochemical reactor on refuse are: an almost complete drying process; a dimensional reduction with a final product with a D80 lower than 30 mm; an homogenizing and elimination of halogens combining themselves in saline form and a transfer of metallic ions. These ions can be binded to specific reagents during treatment in order to remove definitely them from the RDF produced. After treatment the output product is constituted by a dry material with a content of minimum total carbon upper than 65% and a content of total hydrogen equal to 12%, with a calorific power equal or upper than 4600 kcal/kg. Fuel so produced results to be without halogens and it has a sulphur content less than values indicated in the European standards. Ashes resulting from the burning of this product are poor in metals, because they are removed by mechanochemical treatment during the transformation process. Another positive element of this technology is the absence of emissions such as greenhouse gasses, NOX, powders and dioxin in atmosphere. Proofs carried out in lab-scale plant showed the practicability of the technology. The experimental plant realised with this technology will have a productivity of 3-5 ton/hour, and it will be suitable for the RSU treatment of a community of about 30.000-50.000 inhabitants. The system can be turned on or turned off in every moment by this particular technology, so that it becomes useful in all those cases in which wastes production is seasonal, as it happens in tourist areas. Another important feature is the possibility of carrying this plant directly near

  3. A Mobile Application for Smart House Remote Control System

    CERN Document Server

    Rajabzadeh, Amir; Jahromi, Zahra Forootan

    2010-01-01

    At the start of the second decade of 21th century, the time has come to make the Smart Houses a reality for regular use. The different parts of a Smart House are researched but there are still distances from an applicable system, using the modern technology. In this paper we present an overview of the Smart House subsystems necessary for controlling the house using a mobile application efficiently and securely. The sequence diagram of the mobile application connecting to the server application and also the use-cases possible are presented. The challenges faced in designing the mobile application and illustrating the updated house top plane view in that application, are discussed and solutions are adapted for it. Finally the designed mobile application was implemented and the important sections of it were described, such as the interactive house top view map which indicates the status of the devices using predefined icons. The facilities to manage the scheduled tasks and defined rules are also implemented in t...

  4. CHARACTERISTICS OF LIFE STYLE AND HEALTH-STATUS OF MALE STUDENTS AT A NATIONAL COLLEGE OF TECHNOLOGY

    OpenAIRE

    池本, 幸雄; 出村, 慎一; 長澤, 吉則; 山次, 俊介; 島田, 茂; 南, 雅樹

    2003-01-01

    The purpose of this study was to examine characteristics of life style and health-status of male students at a National College of Technology. A questionnaire consisting of 75 items on life style and health-status was administered to 581 healthy male students aged 15 to 20 years. The frequencies and proportions for each item were computed, and the proportion-differences were examined using one-way analysis of variance. Quite a few students have some exercise habit, and they exercise more than...

  5. The status of lightweight photovoltaic space array technology based on amorphous silicon solar cells

    Science.gov (United States)

    Hanak, Joseph J.; Kaschmitter, Jim

    1991-01-01

    Ultralight, flexible photovoltaic (PV) array of amorphous silicon (a-Si) was identified as a potential low cost power source for small satellites. A survey was conducted of the status of the a-Si PV array technology with respect to present and future performance, availability, cost, and risks. For existing, experimental array blankets made of commercial cell material, utilizing metal foil substrates, the Beginning of Life (BOL) performance at Air Mass Zero (AM0) and 35 C includes total power up to 200 W, power per area of 64 W/sq m and power per weight of 258 W/kg. Doubling of power per weight occurs when polyimide substrates are used. Estimated End of Life (EOL) power output after 10 years in a nominal low earth orbit would be 80 pct. of BOL, the degradation being due to largely light induced effects (-10 to -15 pct.) and in part (-5 pct.) to space radiation. Predictions for the year 1995 for flexible PV arrays, made on the basis of published results for rigid a-Si modules, indicate EOL power output per area and per weight of 105 W/sq m and 400 W/kg, respectively, while predictions for the late 1990s based on existing U.S. national PV program goals indicate EOL values of 157 W/sq m and 600 W/kg. Cost estimates by vendors for 200 W ultralight arrays in volume of over 1000 units range from $100/watt to $125/watt. Identified risks include the lack of flexible, space compatible encapsulant, the lack of space qualification effort, recent partial or full acquisitions of US manufacturers of a-Si cells by foreign firms, and the absence of a national commitment for a long range development program toward developing of this important power source for space.

  6. A review on the current status and production technology of {sup 32,} {sup 33}P-orthophosphoric acid

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ul Jae; Han, Hyun Soo; Cho, Woon Kap; Kuznetsov, Rostislav A

    2000-10-01

    The current status of {sup 32}, {sup 33}P-Orthophosphoric acid production technology is reviewed. The following aspects of the technology are covered: - production of phosphorus-32 and phosphorus-33 using various nuclear reactions; - chemical properties of sulfur and phosphorus effecting the technology of radioactive phosphorus production; - chemical state of {sup 32}, {sup 33}P in neutron irradiated sulfur; - the technology of radioactive phosphorus isolation from neutron irradiated target and orthophosphoric acid production; - purification of {sup 32}, {sup 33}P-orthophosphoric acid from impurities and some related problems, like the nature of impurities, the storage of the final product, etc. - the quality control procedures of carrier-free ({sup 32}, {sup 33}P)-orthophosphoric acid preparations.

  7. Lifecycle Industry GreenHouse gas, Technology and Energy through the Use Phase (LIGHTEnUP) – Analysis Tool User’s Guide

    Energy Technology Data Exchange (ETDEWEB)

    Morrow, William R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Shehabi, Arman [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Smith, Sarah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

    2016-06-22

    The LIGHTEnUP Analysis Tool (Lifecycle Industry GreenHouse gas, Technology and Energy through the Use Phase) has been developed for The United States Department of Energy’s (U.S. DOE) Advanced Manufacturing Office (AMO) to forecast both the manufacturing sector and product life-cycle energy consumption implications of manufactured products across the U.S. economy. The tool architecture incorporates publicly available historic and projection datasets of U.S. economy-wide energy use including manufacturing, buildings operations, electricity generation and transportation. The tool requires minimal inputs to define alternate scenarios to business-as-usual projection data. The tool is not an optimization or equilibrium model and therefore does not select technologies or deployment scenarios endogenously. Instead, inputs are developed exogenous to the tool by the user to reflect detailed engineering calculations, future targets and goals, or creative insights. The tool projects the scenario’s energy, CO2 emissions, and energy expenditure (i.e., economic spending to purchase energy) implications and provides documentation to communicate results. The tool provides a transparent and uniform system of comparing manufacturing and use-phase impacts of technologies. The tool allows the user to create multiple scenarios that can reflect a range of possible future outcomes. However, reasonable scenarios require careful attention to assumptions and details about the future. This tool is part of an emerging set of AMO’s life cycle analysis (LCA) tool such as the Material Flows the Industry (MFI) tool, and the Additive Manufacturing LCA tool.

  8. National Advanced Drilling and Excavation Technologies Institute. Status report, March 1997

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, C.

    1997-12-31

    The National Advanced Drilling and Excavation Technologies (NADET) program is intended to pool support, talent, and technologies of the industries dependent upon drilling and excavation technologies to initiate, coordinate, and sustain programs capable of developing substantial technological advances. The NADET Institute has been funded by the DOE Office of Geothermal Technologies and is now supporting seven projects aimed at advanced geothermal drilling technologies. The Institute seeks to broaden its base of funding and technological support from both government and industry sources. Encouraging progress has been made with the support of dues-paying industrial members and industrial sponsorship of a substantial drilling research study.

  9. MHD Technology Transfer, Integration and Review Committee. Fifth semi-annual status report, April 1990--September 1990

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    This fifth semi-annual status report of the MHD Technology Transfer, Integration, and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1990 through September 1990. It includes summaries and minutes of committee meetings, progress summaries of ongoing Proof-of-Concept (POC) contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months.

  10. Sustainable Housing Renewal

    Directory of Open Access Journals (Sweden)

    M. Sitar

    2008-01-01

    Full Text Available Following the already proved models the sustainable planning culture is endangering several methods directed towards the needs of tenants in the existing post-war housing stock. The case-study of our project is the renewal of the multi stored building in the housing estate Metalna, Maribor/Tezno (1949. It is based on the sustainable renovation principle for the quality of sustainable housing in functional, technological and environmental point of view. According to it, the idea of the project was to improve the functionality of the building as well as of individual housing units. One of the main goals was to introduce the variety of space and typology of individual housing units. Beside, there was an intention to rebuild and redesign the green area, especially the problems of parking and playground for children. On the other hand, the project is introducing the low-energy renovation principle including new technologies, structural elements and materials. Two scenarios of technological renewal were suggested. The first one was a classical one using additional thermal insulation of the building envelope and fitting of new structural elements such as windows, doors, balconies, windbreaks etc. (Renewal 1. The second scenario, however, included the sunspace construction used as a new passive solar structural element, modifying the envelope (Renewal 2. The energy efficiency of the suggested scenarios were calculated according to the procedures given in EN 832 standard considering the attached sunspace as integral part of the building in first case and as a passive solar object adjacent to the thermal envelope of the building in the second case. The results show that the last case yields the most energy efficient renewal of the existing residential building.

  11. Active house

    DEFF Research Database (Denmark)

    Eriksen, Kurt Emil; Olesen, Gitte Gylling Hammershøj

    2010-01-01

    Formålet med dette abstrakt er at illustrere, at huse kan være konstrueret til at basere sig udelukkende på vedvarende energikilder og samtidig være CO2-neutrale og producere mere energi end de forbruger. Active House Visionen undersøger disse muligheder i otte demonstration huse i fem forskellige...

  12. House Slaves

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Rising house prices in China’s major cities is a major headache for people taking a first step on the property ladder and has led to a growing number sacrificing quality of life just to have a home of their own Closely watching the family’s spend- ing a

  13. The Status of Technology and Engineering Education in the United States: A Fourth Report of the Findings from the States (2011-12)

    Science.gov (United States)

    Moye, Johnny J.; Dugger, William E., Jr.; Starkweather, Kendall N.

    2012-01-01

    Technology and engineering education continues to evolve as it becomes more apparent that students need this information to become more successful in college and careers. The International Technology and Engineering Educators Association (ITEEA ) has tracked the status of technology education in the United States in three separate studies over the…

  14. Adoption of precision agriculture technologies in India and in some developing countries: Scope, present status and strategies

    Institute of Scientific and Technical Information of China (English)

    Pinaki Mondal; Manisha Basu

    2009-01-01

    Rapid socio-economic changes in some developing countries, including India, are creating new scopes for application of precision agriculture (PA). The implications of dramatic shifts for economic development, urbanization and energy consumption in some devel-oping countries are immense. High-tech nature of traditional PA technologies developed in advanced countries created a real challenge for engineers to search suitable PA technologies for developing countries. It is expected that application of balanced soft and hard PA technologies based on the need of specific socio-economic condition of a country will make PA suitable for developing countries also. 'Soft' PA depends mainly on visual observation of crop and soil and management decision based on experience and intuition, rather than on statistical and scientific analysis. 'Hard' PA utilizes all modern technologies such as GPS, RS, and VRT. Three components, namely, 'single PA technology', 'PA technology package' (for the user to select one or combination) and 'integrated PA technology', have been identified as a part of adoption strategies of PA in the developing countries. Therefore, the objective of this paper is to find out the scope, the present status and the strategies for adoption of PA in India and in some developing countries. Application of PA in cash crop, plan-tation crop, etc. has been discussed. Application of some medium and low-tech PA tools such as chlorophyll meter and leaf colour chart. in small farms has been included. This exhaustive review of the present status of PA in India and in some developing countries is expected to help to find out the adoption trend and direction of future research. Detailed strategy for the adoption of PA in India has also been proposed.

  15. Environmental control implications of generating electric power from coal. Appendix B. Assessment of status of technology for solvent refining of coal. 1977 technology status report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    This report reviews the technology and environmental impacts of the solvent refined coal process to produce clean solid fuel (SRC-I). Information on SRC-I pilot plant operation, process design, and economics is presented. A bibliography of current available literature in this technology area, divided into fourteen categories with abstracts of the references, is appended. The history, current operations, and future plans for the SRC pilot plants at Fort Lewis and Wilsonville are reviewed. Process data generated at these pilot plants for various coals are used as a basis for a conceptual commercial plant design with a capacity to process 20,000 tons per day (TPD) of prepared coal. Block flow diagrams, material balances, an energy balance, and a list of raw materials for the plant are also provided. Capital cost estimates for a 20,000 TPD coal feed plant derived from four prior economic studies range from $706 million to $1093 million in 1976 dollars. The annual net operating cost is estimated at $238.6 million (1976 dollars) and the average product cost at $2.71/MM Btu based on utility financing (equity 25:debt 75) with $25/ton as the delivered price of the dry coal. The report also discusses special technical considerations associated with some of the process operations and major equipment items and enumerates technical risks associated with the commercialization of the SRC-I process.

  16. Current status of radon and radium monitoring at the Federal University of Technology (UTFPR), PR, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Paschuk, Sergei A.; Correa, Janine N.; Kappke, Jaqueline; Schelin, Hugo R.; Denyak, Valeriy; Barbosa, Laercio; Perna, Allan F.N. [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil)

    2011-07-01

    Numerous and systematic studies performed in different countries for many decades resulted in the explicit conclusion that radon exposure, as well as its progeny, is the main cause of lung cancer among non-smokers. All three natural radon isotopes ({sup 222}Rn, {sup 220}Rn and {sup 219}Rn) are produced in the three principal natural radioactive decay chains. Specifically, the {sup 222}Rn is produced by the decay series of {sup 238}U and proceeded from {alpha}-decay of {sup 226}Ra. Current work describes the present status and obtained results concerning indoor radon survey in dwellings, radon in water supply and soil gas tests performed by the Laboratory of Applied Nuclear Physics of the Federal University of Technology (UTFPR) within Curitiba urban area. For radon in air activity measurements, it was used polycarbonate etched track detectors such as LEXAN (GE) and CR-39, mounted in diffusion chambers. For soil gas measurements, the experimental setup was based on the Professional Radon Monitor (AlphaGUARD, Genitron/SAPHYMO) connected to the air pump with filter vessels and to specially developed in our Laboratory the Soil Gas Probe. In the case of radon tests in drinking water, the experimental setup was based on the AlphaGUARD Radon monitor and Electronic radon detector RAD7 (Durridge Company, Inc.) connected to special kit of glass vessels through the air pump. Obtained results permitted to identify few dwellings where radon concentration in air was found bigger than 600 Bq/m{sup 3} which is considered as the action level by most of the European Community and the World Health Organization (WHO). In the case of studied artesian wells, collected samples of water presented the average {sup 222}Rn activity about 60 Bq/L which is 6 times bigger than maximum level recommended by USEPA. Some artesian wells presented the radon activity of almost 200 Bq/L. More over, it was identified the radioactivity of radium ({sup 226}Ra) salts which are soluble in water and almost

  17. The Status of Technology-Enhanced Education and Service Delivery in Rehabilitation Counselor Education

    Science.gov (United States)

    Oswald, Gina R.; Huber, Mary J.; Wilson, Josephine F.; Embree, Jared

    2015-01-01

    Purpose: The purpose of this article is to discuss the upsurge of technology-enhanced rehabilitation education programs and telerehabilitation services, to provide examples of these advancements, and to discuss the implications of this technology for education and the field including the unique advantage to developing technological skills through…

  18. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Rogers, Adam Zachary; Simmons, R. F.; Palethorpe, S. J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  19. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program, FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; Rogers, A.Z.; McCray, J.A.; Simmons, R.F.; Palethorpe, S.J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  20. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-99 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Kirkham, Robert John; Pao, Jenn Hai; Hinckley, Steve Harold

    1999-10-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1999, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed on radionuclide leaching, microbial degradation, waste neutralization, and a small mockup for grouting the INTEC underground storage tank residual heels.

  1. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-99 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    A. K. Herbst; J. A. McCray; R. J. Kirkham; J. Pao; S. H. Hinckley

    1999-09-30

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1999, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed on radionuclide leaching, microbial degradation, waste neutralization, and a small mockup for grouting the INTEC underground storage tank residual heels.

  2. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-2000 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, Alan Keith; Mc Cray, John Alan; Kirkham, Robert John; Pao, Jenn Hai; Argyle, Mark Don; Lauerhass, Lance; Bendixsen, Carl Lee; Hinckley, Steve Harold

    2000-11-01

    The Low-Activity Waste Process Technology Program anticipated that grouting will be used for disposal of low-level and transuranic wastes generated at the Idaho Nuclear Technology Engineering Center (INTEC). During fiscal year 2000, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed using silica gel and other absorbents to solidify sodium-bearing wastes. A feasibility study and conceptual design were completed for the construction of a grout pilot plant for simulated wastes and demonstration facility for actual wastes.

  3. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-2000 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; McCray, J.A.; Kirkham, R.J.; Pao, J.; Argyle, M.D.; Lauerhass, L.; Bendixsen, C.L.; Hinckley, S.H.

    2000-10-31

    The Low-Activity Waste Process Technology Program anticipated that grouting will be used for disposal of low-level and transuranic wastes generated at the Idaho Nuclear Technology Engineering Center (INTEC). During fiscal year 2000, grout formulations were studied for transuranic waste derived from INTEC liquid sodium-bearing waste and for projected newly generated low-level liquid waste. Additional studies were completed using silica gel and other absorbents to solidify sodium-bearing wastes. A feasibility study and conceptual design were completed for the construction of a grout pilot plant for simulated wastes and demonstration facility for actual wastes.

  4. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program, FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; Rogers, A.Z.; McCray, J.A.; Simmons, R.F.; Palethorpe, S.J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  5. Idaho Nuclear Technology and Engineering Center Low-Activity Waste Process Technology Program FY-98 Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Herbst, A.K.; McCray, J.A.; Rogers, A.Z.; Simmons, R.F.; Palethrope, S.J.

    1999-03-01

    The Low-Activity Waste Process Technology Program at the Idaho Nuclear Technology and Engineering Center (INTEC) anticipates that large volumes of low-level/low-activity wastes will need to be grouted prior to near-surface disposal. During fiscal year 1998, three grout formulations were studied for low-activity wastes derived from INTEC liquid sodium-bearing waste. Compressive strength and leach results are presented for phosphate bonding cement, acidic grout, and alkaline grout formulations. In an additional study, grout formulations are recommended for stabilization of the INTEC underground storage tank residual heels.

  6. Status of clean vehicle technologies and impact of the accompanying public policies; Etat des filieres de vehicules propres et impact des politiques publiques d'accompagnement

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-06-01

    The French inter-ministry committee for clean vehicles (CIVP) published in 1999 a report about the status of development of the different clean vehicle technologies (electric-powered, LPG-fueled, natural gas fueled, hybrid, fuel cells) and accompanied by recommendations for public policies. A re-evaluation of these technologies was planned by the end of 2002 and is the purpose of this document. The first part makes a status of the actions carried out by the public authorities since the previous CIVP report. The second part presents the present day situation of the LPG, natural gas and electric technologies. It describes also the recent advances in the classical technologies (gasoline and diesel engines) and includes a part about battery technologies and about the use of bio-fuels. The status of each technology is presented both for France and for foreign countries and with its perspectives of evolution. (J.S.)

  7. MSC POOL技术及其发展现状%MSC POOL Technology and Its Development Status

    Institute of Scientific and Technical Information of China (English)

    刘蓉; 李旭

    2011-01-01

    Based on technical research of MSC POOL, the definition and principle of MSC POOL technology are elaborated in a detail. The development status of various manufacturers for MSC POOL technology are summarized. Some typical business examples with MSC POOL technology and the benefits brought by MSC POOL technology in the practical application are analyzed. Finallyt some problems brought by MSC POOL technology and development trend of MSC POOL technology are proposed.%在对MSC POOL技术调研的基础上,详细阐述了MSC POOL技术的定义及原理,然后总结各个厂家针对MSCPOOL技术的发展状况,分析各地的一些典型商用MSC POOL技术实例以及MSC POOL技术在实际应用中所带来的优势,并总结了MSC POOL技术带来的一些问题,展望MSCPOOL技术未来的发展趋势.

  8. Housing Gap

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Measures to cool down China's red-hot housing market are sweeping the country. The State Council, China's cabinet, issued a circular in late May announcing an increase in the minimum down payment for a new apartment larger than 90 square meters to 30 percent from 20 percent and imposing a transaction tax on properties resold within five years of purchase, among others. One of the aims, according to the cir-

  9. The House that NASA Built

    Science.gov (United States)

    1977-01-01

    Tech House, located at NASA's Langley Research Center, Hampton, Virginia, is a demonstration project in which aerospace and commercial building technology are combined to produce an energy-efficient home. Advanced technology offers savings to the family in utility costs and energy conservation. Solar panels on the roof of tech house provide the principal energy saving. They capture the sun's rays to heat water in pipes that run through the solar collectors. The heated water is then stored in a large, well insulated underground tank. A heat exchanger extracts beat from the water and blows it through ducts to warm the house. Tech House is well insulated for energy savings. The principal insulation is fireproof Tripolymer foam which is sprayed onto walls and ceilings in thicknesses up to six inches.

  10. EHV systems technology - A look at the principles and current status. [Electric and Hybrid Vehicle

    Science.gov (United States)

    Kurtz, D. W.; Levin, R. R.

    1983-01-01

    An examination of the basic principles and practices of systems engineering is undertaken in the context of their application to the component and subsystem technologies involved in electric and hybrid vehicle (EHV) development. The limitations of purely electric vehicles are contrasted with hybrid, heat engine-incorporating vehicle technology, which is inherently more versatile. A hybrid vehicle concept assessment methodology is presented which employs current technology and yet fully satisfies U.S. Department of Energy petroleum displacement goals.

  11. Vertical-axis wind turbines -- The current status of an old technology

    Energy Technology Data Exchange (ETDEWEB)

    Berg, D.E.

    1996-12-31

    Vertical-axis wind turbine technology is not well understood, even though the earliest wind machines rotated about a vertical axis. The operating environment of a vertical-axis wind turbine is quite complex, but detailed analysis capabilities have been developed and verified over the last 30 years. Although vertical-axis technology has not been widely commercialized, it exhibits both advantages and disadvantages compared to horizontal-axis technology, and in some applications, it appears to offer significant advantages.

  12. The Status and Trends of Isotopes Technology and Application——Based on NTR Printed by IAEA in Last Five Years

    Directory of Open Access Journals (Sweden)

    ZHANG Hua-ming

    2015-11-01

    Full Text Available Every year IAEA organizes experts to produce a review on nuclear technology and its application all over the world, namely NTR (Nuclear Technology Review, in which the status of isotopes technologies and applications are totally involved. From recent five years’ reports (2010-2014, the forward concerning isotope technology and applications were presented, such as radioisotopes produced by accelerator, stable- and radio- isotopes and their applications to environment, nuclear medicine, food and agriculture. etc.

  13. Computer-aided technology for fabricating complete dentures: systematic review of historical background, current status, and future perspectives.

    Science.gov (United States)

    Bidra, Avinash S; Taylor, Thomas D; Agar, John R

    2013-06-01

    Computer-aided technology is an emerging method for fabricating complete dentures. Consolidated information about historical background, current status, and scope for the future is lacking. The purpose of this systematic review was to analyze the existing literature on computer-aided technology for fabricating complete dentures and provide the reader with a historical background, current status, and future perspectives on this emerging technology. An electronic search of the English language literature between the periods of January 1957 and June 2012 was performed by using PubMed/MEDLINE with the following specific search terms: CAD-CAM complete dentures, digital complete dentures, computer dentures, designed dentures, machined dentures, manufactured dentures, milled dentures, and rapid prototyping dentures. Additionally, the search terms were used on the Google search engine to identify current commercial manufacturers and their protocols. A total of 1584 English language titles were obtained from the electronic database, and the systematic application of exclusion criteria resulted in the identification of 8 articles pertaining to computer-aided technology for complete dentures. Since the first published report in 1994, multiple authors have described different theoretical models and protocols for fabricating complete dentures with computer-aided technology. Although no clinical trials or clinical reports were identified in the scientific literature, the Google search engine identified 2 commercial manufacturers in the United States currently fabricating complete dentures with computer-aided design and computer-aided manufacturing (CAD/CAM) technology for clinicians world-wide. These manufacturers have definitive protocols in place and offer exclusive dental materials, techniques, and laboratory support. Their protocols contrast with conventional paradigms for fabricating complete dentures and allow the fabrication of complete dentures in 2 clinical appointments

  14. Environmental control implications of generating electric power from coal. 1977 technology status report. [300 references

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    This report is an in-depth review and analysis of particulate control technologies applicable to coal-fired utility boilers. Sources and characteristics of fly ash, applicable emission regulations, and measurement techniques are also discussed. Available control technologies (electrostatic precipitators, fabric filters, and wet scrubbers) are described in detail. In each case, the theory of operation, factors affecting performance, representative installations, costs, and secondary environmental impacts are analyzed. Techniques under development for improving the performance or extending the capabilities of existing technologies are described. Advanced alternative technologies now in the research stage are also evaluated.

  15. Influence of vitamins A, D3 and E status on post-mortem meat quality in steers under winter housing or pasture finishing systems

    DEFF Research Database (Denmark)

    Turner, T; Pickova, J; Ertbjerg, P;

    2011-01-01

    We investigated the influence of Swedish recommended vitamins A, D3 and E supplementation levels on muscle tenderness and fatty acid (FA) composition under indoor or outdoor finishing programmes. Swedish Red breed steer calves were divided into vitamin supplemented (n512) and non-supplemented (n515......) groups while on pasture prior to the finishing period. This trial began at the beginning of the winter housing period during which the steers were fed a 55 : 45 dry matter barley : grass silage diet indoors. The indoor finished group was comprised of vitamin supplemented (n56) and non-supplemented (n58......) steers slaughtered after about 155 days on feed. Vitamin supplemented steers were provided with 100 g mineral supplement providing 400 000 IU vitamin A, 100 000 IU D3 and 3000 IU E daily as recommended for Swedish production practices. In spring, outdoor finished vitamin supplemented (n56) and non...

  16. The association of individual and neighborhood social cohesion, stressors, and crime on smoking status among African-American women in southeastern US subsidized housing neighborhoods.

    Science.gov (United States)

    Andrews, Jeannette O; Mueller, Martina; Newman, Susan D; Magwood, Gayenell; Ahluwalia, Jasjit S; White, Kellee; Tingen, Martha S

    2014-12-01

    The purpose of this study was to examine the associations between individual and neighborhood social contextual factors and smoking prevalence among African-American women in subsidized neighborhoods. We randomly sampled 663 adult women in 17 subsidized neighborhoods in two Southeastern US states. The smoking prevalence among participants was 37.6%, with an estimated neighborhood household prevalence ranging from 30 to 68%. Smokers were more likely to be older, have lower incomes, have lower BMI, and live with other smokers. Women with high social cohesion were less likely to smoke, although living in neighborhoods with higher social cohesion was not associated with smoking prevalence. Women with higher social cohesion were more likely to be older and had lived in the neighborhood longer. Women with high stress (related to violence and disorder) and who lived in neighborhoods with higher stress were more likely to smoke. Younger women were more likely to have higher stress than older women. There were no statistically significant associations with objective neighborhood crime data in any model. This is the first study to examine both individual and neighborhood social contextual correlates among African-American women in subsidized neighborhoods. This study extends findings about smoking behaviors and neighborhood social contexts in this high-risk, urban population. Future research is needed to explore age and residential stability differences and perceptions of social cohesion, neighborhood disorder, and perceived violence in subsidized housing. Further research is also warranted on African-American women, subsidized housing, smoking, social context, health disparities' effective strategies to address these individual and contextual factors to better inform future ecological-based multilevel prevention, and cessation intervention strategies.

  17. Women's housing conditions in Bangladesh.

    Science.gov (United States)

    Shefali, M K

    1996-01-01

    This news article describes women's housing conditions, housing policy, and pilot programs to house poor women in Bangladesh. Although Bangladesh has a constitution that reinforces the equal status of women, in practice, men dominate and patrilineal customs determine inheritance and property rights. Religious affiliation also determines land tenure and inheritance. Muslim women can inherit 12.5% of their husband's property if there are children. 25% is inherited if wives are without children. Hindu women without sons can inherit their husband's property, but not parental property. Many families refuse to release property to women without a fight. Women, regardless of ownership of land, rarely control or use their land. The custom of requiring men to maintain wives during the marriage, and daughters until marriage, creates obstacles to women's decision making about property. Without collateral and other security women are unable to secure bank loans. Many women are also constrained by the requirement of male consent or guarantees for bank transactions. Banks do not have a gender responsive criteria for selecting loan recipients. The government does not provide sufficient housing to satisfy the growing housing needs due to population growth. Some housing is available from slum landlords. A National Housing Policy was formulated in 1993. Priority would be given to the housing needs of low income women in urban areas and women-headed households with income below the poverty line. The policy does not address the underlying factors that prevent equal access to housing for women. The government prepared a Human Settlement and Urban Development proposal for the Habitat II conference. The plan did not address gender issues. Special efforts are being made by nongovernmental groups to meet the housing needs of professional women and for some disadvantaged women.

  18. Status of the fast mission: Micro-satellite formation flying for technology, science and education

    NARCIS (Netherlands)

    Guo, J.; Maessen, D.C.; Gill, E.K.A.; Moon, S.G.; Zheng, G.

    2009-01-01

    FAST (Formation for Atmospheric Science and Technology demonstration) is a cooperative Dutch Chinese formation flying mission led by Delft University of Technology (TU Delft) in the Netherlands and Tsinghua University in China. It is expected to be the first international micro-satellite formation f

  19. Status of the fast mission: Micro-satellite formation flying for technology, science and education

    NARCIS (Netherlands)

    Guo, J.; Maessen, D.C.; Gill, E.K.A.; Moon, S.G.; Zheng, G.

    2009-01-01

    FAST (Formation for Atmospheric Science and Technology demonstration) is a cooperative Dutch Chinese formation flying mission led by Delft University of Technology (TU Delft) in the Netherlands and Tsinghua University in China. It is expected to be the first international micro-satellite formation

  20. Status of the fast mission: Micro-satellite formation flying for technology, science and education

    NARCIS (Netherlands)

    Guo, J.; Maessen, D.C.; Gill, E.K.A.; Moon, S.G.; Zheng, G.

    2009-01-01

    FAST (Formation for Atmospheric Science and Technology demonstration) is a cooperative Dutch Chinese formation flying mission led by Delft University of Technology (TU Delft) in the Netherlands and Tsinghua University in China. It is expected to be the first international micro-satellite formation f

  1. The Status Quo and Prospect of Chinese-funded Enterprises Technology Transfer to Africa

    Institute of Scientific and Technical Information of China (English)

    Yang Guang; Li Xinfeng; Chen Mo

    2015-01-01

    Weak technical foundation is an important bottleneck to restrict economic growth of African countries. To promote the technological progress of Africa, the Chinese African strategy always encourages and supports Chinese-funded enterprises to transfer technology to Africa, but it is worth nothing that the critique by some African scholars and local communities on technology transfer to Africa by the Chinese-funded enterprises is spreading. In fact, in order to implement the "localization" strategy, develop African market or honor cooperation agreement on additional technical transfer, Chinese-funded enterprises always adhere to actively carrying out technology transfer to Africa, and have made certain achievements in improving the host countries’ technical environment, increasing labor income and others. In order to cope with the challenges and dispel the crisis of public opinion, China should uphold the concept of "teaching how to fish" and push forward the continuous upgrading and optimization of technology transfer to Africa all-dimensionally.

  2. The USAF Phillips Laboratory sodium-sulfur battery technology program: Results and status

    Science.gov (United States)

    Rainbow, Marc E.; Somerville, Andrew

    1996-01-01

    Tests performed on NaS batteries are reported. The results of safety and abuse testing, shock and vibration tests, cell failure on warm-up, freeze thaw, overtemperature conditions, electrolyte fracture, overdischarge, and short circuit tests are presented along with GEO and LEO cycle tests and the status of the NaS cell flight tests.

  3. Forward Osmosis in India: Status and Comparison with Other Desalination Technologies.

    Science.gov (United States)

    Mehta, Dhruv; Gupta, Lovleen; Dhingra, Rijul

    2014-01-01

    With an increase in demand of freshwater and depleting water sources, it is imperative to switch to seawater as a regular source of water supply. However, due to the high total dissolved solid content, it has to be desalinated to make it drinkable. While desalination technologies have been used for many years, mass deployment of such technologies poses a number of challenges like high energy requirements as well as high negative environmental impact through side products and CO2 emissions. The purpose of this paper is to present a sustainable technology for desalination. Forward osmosis, an emerging technology, is compared with the other commonly used technologies worldwide, namely, multieffect distillation, multistage flash distillation, and reverse osmosis as well as other emerging technologies like vapour compression, solar humidification dehumidification, nanofiltration, and freezing desalination. As energy consumption and associated greenhouse gas emissions are one of the major concerns of desalination, this paper concludes that forward osmosis is an emerging sustainable technology for seawater desalination. This paper then presents the challenges involved in the application of forward osmosis in India and presents a plant setup. In the end, the cost comparison of a forward osmosis and reverse osmosis plant has been done and it was concluded that forward osmosis is economically better as well.

  4. The development and current status of the technology of isotope and radiation in China

    Energy Technology Data Exchange (ETDEWEB)

    Luo Zhifu [Dept. of Isotope, China Inst. of Atomic Energy, Beijing, BJ (China)

    1998-10-01

    The research and application of the technology of isotopes and radiation have been reviewed. Since the setup of the China`s first nuclear reactor at China Institute of Nuclear Energy in 1958, the technology of isotopes and radiation has been developed significantly. A research and application system has formed a considerable state. The technology of isotopes and radiation has been taken into the fields of industry, agriculture, medicine, and scientific research. The main achievements are on radiopharmaceuticals, radiation source, radiation process, and radioactive tracers. (author)

  5. Status of Technology in Domestic Nitrogenous Fertilizer Industry%我国氮肥工业技术状况

    Institute of Scientific and Technical Information of China (English)

    曹占高; 凌晓东; 常怀春

    2012-01-01

    分析了国外、国内氮肥工业生产装置的技术状况,罗列了大、中、小型合成氨装置和尿素装置的消耗情况.介绍了我国氮肥生产装置关键部位具有国内或国际水平的新技术的开发与应用情况.%An analysis is made of the status of technology used in the production units of foreign and domestic nitrogenous fertilizer industry, and consumption levels are listed for large-, medium- and small-scale ammonia and urea units. A presentation is given of the development and application of new technology at domestic or international level used in key locations of domestic nitrogenous fertilizer production units.

  6. 榆林地区传统窑居绿色再生技术探析%Analysis of the Green Regeneration Technology for Traditional Cave-house in Yulin Area

    Institute of Scientific and Technical Information of China (English)

    师丽

    2016-01-01

    The purpose of green regeneration for cave-house is to seek the intrinsic factors of the environment construction development, to promote more healthy, coordinated and sustainable development of the environment. For the traditional cave-house in Yulin area, based on the integrated use of energy-saving land-saving, full and scientific use of local resources, this paper proposes suitable technology strategies for the green regeneration of traditinoal cave-house, and inheriting the simplicity and ecological thought in the traditional cave-house, the cave-house green regeneration model is put forward, providing reference for the design and practice of the sustainable development of the traditional cave-house.%窑居建筑绿色再生的目的是要寻求环境建设自身发展的内在因素,促使环境更健康、协调和可持续发展。本文针对榆林地区传统窑洞建筑在综合运用节能节地、充分而科学地利用地方资源的基础上,对传统窑居的绿色再生提出了适宜性技术策略,并且继承传统窑居自身富含的朴素生态思想,提出了窑居绿色再生的模型,为传统窑居的可持续发展提供了设计实践参考。

  7. Advances for prosthetic technology from historical perspective to current status to future application

    CERN Document Server

    LeMoyne, Robert

    2016-01-01

    This book focuses on the advances in transtibial prosthetic technology and targets research in the evolution of the powered prosthesis such as the BiOM, which was derived from considerable research and development at the Massachusetts Institute of Technology. The concept of the book spans the historical evolution of prosthetic applications from passive to new and futuristic robotic prosthetic technologies.  The author describes the reasons for amputation, surgical procedures, and an historical perspective of the prosthesis for the lower limb. He also addresses the phases and sub-phases of gait and compensatory mechanisms arising for a transtibial prosthesis and links the compensatory mechanisms to long-term morbidities.  The general technologies for gait analysis central to prosthetic design and the inherent biomechanics foundations for analysis are also explored.  The book reports on recent-past to current-term applications with passive elastic prostheses.  The core of the book deals with futuristic robo...

  8. Heatshield for Extreme Entry Environment Technology (HEEET) Development and Maturation Status for NF Missions

    Science.gov (United States)

    Ellerby, D.; Blosser, M.; Boghozian, T.; Chavez-Garcia, J.; Chinnapongse, R.; Fowler, M.; Gage, P.; Gasch, M.; Gonzales, G.; Hamm, K.; Kazemba, C.; Ma, J.; Mahzari, M.; Milos, F.; Nishioka, O.; Peterson, K.; Poteet, C.; Prabhu, D.; Splinter, S.; Stackpoole, M.; Venkatapathy, E.; Young, Z.

    2016-01-01

    This poster provides an overview of the requirements, design, development and testing of the 3D Woven TPS being developed under NASA's Heatshield for Extreme Entry Environment Technology (HEEET) project. Under this current program, NASA is working to develop a Thermal Protection System (TPS) capable of surviving entry into Saturn. A primary goal of the project is to build and test an Engineering Test Unit (ETU) to establish a Technical Readiness Level (TRL) of 6 for this technology by 2017.

  9. Status of Wireless Technologies Used For Designing Home Automation System - A Review

    Directory of Open Access Journals (Sweden)

    Ashish J. Ingle

    2011-08-01

    Full Text Available The concept of “Automation” have just started flourishing, companies have developed automated systems of their own to control alarms, sensors, actuators and video cameras and moving further the concept of automated buildings is being recognized. This Paper attempts to study standards / technologies which are used for Home Automation. In brief, concern of this Paper is to cover the detail Technical aspects of the Home Automation Standard/ Technology.

  10. Forward Osmosis in India: Status and Comparison with Other Desalination Technologies

    OpenAIRE

    Mehta, Dhruv; Gupta, Lovleen; Dhingra, Rijul

    2014-01-01

    With an increase in demand of freshwater and depleting water sources, it is imperative to switch to seawater as a regular source of water supply. However, due to the high total dissolved solid content, it has to be desalinated to make it drinkable. While desalination technologies have been used for many years, mass deployment of such technologies poses a number of challenges like high energy requirements as well as high negative environmental impact through side products and CO2 emissions. Th...

  11. Recycling Status of Raw Household Garbage in Local Governments : From the Perspective of Social Technology

    OpenAIRE

    中村, 修; 和田, 真理

    2003-01-01

    The argument about the creation of a recycling-oriented society is growing. However, there is no organized study about the recycling business of raw garbage, which is to be the base of food recycling that reuses raw garbage as resource. Given this factor, We have examined the development of the recycling business of raw garbage from the social technology perspective and added my analysis in this report. As a result, the necessity of social technology for recycling such as the separating metho...

  12. Status of Wireless Technologies Used For Designing Home Automation System - A Review

    OpenAIRE

    Ashish J. Ingle; Bharti W. Gawali

    2011-01-01

    The concept of “Automation” have just started flourishing, companies have developed automated systems of their own to control alarms, sensors, actuators and video cameras and moving further the concept of automated buildings is being recognized. This Paper attempts to study standards / technologies which are used for Home Automation. In brief, concern of this Paper is to cover the detail Technical aspects of the Home Automation Standard/ Technology.

  13. Differential Health and Social Needs of Older Adults Waitlisted for Public Housing or Housing Choice Vouchers.

    Science.gov (United States)

    Carder, Paula; Luhr, Gretchen; Kohon, Jacklyn

    2016-01-01

    Affordable housing is an important form of income security for low-income older persons. This article describes characteristics of older persons waitlisted for either public housing or a housing choice voucher (HCV; previously Section 8) in Portland, Oregon. 358 persons (32% response rate) completed a mailed survey with questions about demographics, health and housing status, food insecurity, and preference for housing with services. Findings indicate that many waitlisted older persons experienced homelessness or housing instability, poor health, high hospital use, and food insecurity. Public housing applicants were significantly more likely to report lower incomes, homelessness, and food insecurity than HCV applicants. We conclude with policy implications for housing and health agencies that serve low-income older persons.

  14. Environmental control implications of generating electric power from coal. Technology status report. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-12-01

    This is the first in a series of reports evaluating environmental control technologies applicable to the coal-to-electricity process. The technologies are described and evaluated from an engineering and cost perspective based upon the best available information obtained from utility experience and development work in progress. Environmental control regulations and the health effects of pollutants are also reviewed. Emphasis is placed primarily upon technologies that are now in use. For SO/sub 2/ control, these include the use of low sulfur coal, cleaned coal, or flue-gas desulfurization systems. Electrostatic precipitators and fabric filters used for the control of particulate matter are analyzed, and combustion modifications for NO/sub x/ control are described. In each area, advanced technologies still in the development stage are described briefly and evaluated on the basis of current knowledge. Fluidized-bed combustion (FBC) is a near-term technology that is discussed extensively in the report. The potential for control of SO/sub 2/ and NO/sub x/ emissions by use of FBC is analyzed, as are the resulting solid waste disposal problems, cost estimates, and its potential applicability to electric utility systems. Volume II presents the detailed technology analyses complete with reference citations. This same material is given in condensed form in Volume I without references. A brief executive summary is also given in Volume I.

  15. Status of Technology Development to enable Large Stable UVOIR Space Telescopes

    Science.gov (United States)

    Stahl, H. Philip; MSFC AMTD Team

    2017-01-01

    NASA MSFC has two funded Strategic Astrophysics Technology projects to develop technology for potential future large missions: AMTD and PTC. The Advanced Mirror Technology Development (AMTD) project is developing technology to make mechanically stable mirrors for a 4-meter or larger UVOIR space telescope. AMTD is demonstrating this technology by making a 1.5 meter diameter x 200 mm thick ULE(C) mirror that is 1/3rd scale of a full size 4-m mirror. AMTD is characterizing the mechanical and thermal performance of this mirror and of a 1.2-meter Zerodur(R) mirror to validate integrate modeling tools. Additionally, AMTD has developed integrated modeling tools which are being used to evaluate primary mirror systems for a potential Habitable Exoplanet Mission and analyzed the interaction between optical telescope wavefront stability and coronagraph contrast leakage. Predictive Thermal Control (PTC) project is developing technology to enable high stability thermal wavefront performance by using integrated modeling tools to predict and actively control the thermal environment of a 4-m or larger UVOIR space telescope.

  16. The Development of Information Technologies in the Sphere of Housing Service and Utilities as a Factor of National Life Quality Increase

    OpenAIRE

    Kolykhaeva, Yuliya Aleksandrovna

    2015-01-01

    There were considered housing and communal services in the article as it is the most important part of life sustainment infrastructure that defines comfort conditions of human life activities. There was stated Ineffective functioning of housing and communal services, which leads to a decrease in quality of life. There was identified a cause for the current situation which is the ineffectiveness of the management system, including the ineffectiveness of technical policy, the policy of energy c...

  17. Measurement of Spent Fuel Assemblies - Overview of the Status of the Technology for Initiating Discussion at NATIONAL RESEARCH CENTRE KURCHATOV INSTITUTE June 2013

    Energy Technology Data Exchange (ETDEWEB)

    SISKIND B.; N/A

    2013-06-03

    This presentation provides an overview of the status of the technology for the measurement of the fissile material content of spent nuclear reactor fuel. The emphasis is on how the needs of the U.S. Nuclear Regulatory Commission and the International Atomic Energy Agency are met by the available technology and what more needs to be done in this area.

  18. Application and Research Status of Alternative Materials for 3D-printing Technology

    OpenAIRE

    Wang, Yanqing; SHEN Jingxing; WU Haiquan

    2016-01-01

    Application features and research status of alternative 3D-printing materials for six typical 3D-printingtechniques were reviewed. From the point of view of physical forms, four kinds of materials of liquid photosensitive resin material, thin sheet material (paper or plastic film) , low melting point filament material and powder material are included. And from the composition point of view, nearly all kinds of materials in the production and life are included such as polymer materials: plasti...

  19. Hydrogen storage for vehicular applications: Technology status and key development areas

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, S.L.; Handrock, J.L.

    1994-04-01

    The state-of-the-art of hydrogen storage technology is reviewed, including gaseous, liquid, hydride, surface adsorbed media, glass microsphere, chemical reaction, and liquid chemical technologies. The review of each technology includes a discussion of advantages, disadvantages, likelihood of success, and key research and development activities. A preferred technological path for the development of effective near-term hydrogen storage includes both cur-rent DOT qualified and advanced compressed storage for down-sized highly efficient but moderate range vehicles, and liquid storage for fleet vehicle applications. Adsorbate media are also suitable for fleet applications but not for intermittent uses. Volume-optimized transition metal hydride beds are also viable for short range applications. Long-term development of coated nanoparticulate or metal matrix high conductivity magnesium alloy, is recommended. In addition, a room temperature adsorbate medium should be developed to avoid cryogenic storage requirements. Chemical storage and oxidative schemes present serious obstacles which must be addressed for these technologies to have a future role.

  20. The Status Quo and Outlook of Chinese Coal Geology and Exploration Technologies

    Institute of Scientific and Technical Information of China (English)

    XU Shuishi; CHENG Aiguo; CAO Daiyong

    2008-01-01

    Coal is China's dominant energy resource. Coal geological exploration is the basis of sustainable development of coal industry. Since the late 1990s, the advances in Chinese coal geology and exploration techniques have been shown in the following aspects. (1) The basic research of coal geology has changed from traditional geological studies to earth system science; (2) Breakthroughs have been achieved in integrated exploration techniques for coal resources; (3) Evaluation of coal and coalbed methane resources provides important basis for macropolicy making for China's coal industry and construction of large coal bases; (4) Significant advances have been made in using information technology in coal geological exploration and 3S (GPS, GIS, RS) technology. For the present and a period of time in the future, major tasks of Chinese coal geological technology are as follows: (1) solving resources replacement problem in eastern China and geological problems of deep mining; (2) solving problem of integrated coal exploration of complex regions in energy bases of central China, and resources problems induced by coal exploitation; (3) making efforts to enhance the level of geological research and resources evaluation of coal-accumulation basins in western China; (4) strengthening geological research of clean coal technologies; (5) strengthening geological research of the problems in modern coal mining and safe production; (6) promoting information technology in coal resources and major geological investigations.

  1. Development Status and Challenge of PetroChina's Deep Drilling Technologies

    Institute of Scientific and Technical Information of China (English)

    Wang Haige; Zheng Xinquan

    2005-01-01

    @@ Deep and ultra-deep drilling technologies have been developed since the late 1930s, and got great achievements especially in the last two decades. The depth of well completion has even reached to 12 kilometers. Several countries, such as US and some European countries,are leading in the advanced deep and ultra-deep drilling technologies in the world. In recent years, nevertheless,PetroChina has also made big progress in mechanical penetration rate (ROP), drilling period, amount of drilling bit used in a single well of deep drilling as well as in deep drilling equipments. Compared with the high-level technologies of complicated deep drilling in the world,PetroChina still has a long way to go.

  2. Application of structural health monitoring technologies to bio-systems: current status and path forward

    Science.gov (United States)

    Bhalla, Suresh; Srivastava, Shashank; Suresh, Rupali; Moharana, Sumedha; Kaur, Naveet; Gupta, Ashok

    2015-03-01

    This paper presents a case for extension of structural health monitoring (SHM) technologies to offer solutions for biomedical problems. SHM research has made remarkable progress during the last two/ three decades. These technologies are now being extended for possible applications in the bio-medical field. Especially, smart materials, such as piezoelectric ceramic (PZT) patches and fibre-Bragg grating (FBG) sensors, offer a new set of possibilities to the bio-medical community to augment their conventional set of sensors, tools and equipment. The paper presents some of the recent extensions of SHM, such as condition monitoring of bones, monitoring of dental implant post surgery and foot pressure measurement. Latest developments, such as non-bonded configuration of PZT patches for monitoring bones and possible applications in osteoporosis detection, are also discussed. In essence, there is a whole new gamut of new possibilities for SHM technologies making their foray into the bi-medical sector.

  3. Status and issue of coal mine safety technology development in Japan and international co-operation

    Energy Technology Data Exchange (ETDEWEB)

    Nakmura, K. [Ministry of International Trade and Industry, Tokyo (Japan). Mine Safety Division, Environmental Protection and Industrial Location Bureau

    2001-03-01

    Recent trends in coal mine accidents in Japan are reviewed and the incident of mine fire at the Ikeshima coal mine in Nagasaki Prefecture in February 2000 reported. An overview is given of safety projects underway in Japan or jointly with Australia. Cooperative projects to prevent spontaneous combustion to develop underground monitoring techniques, and to transfer safety technologies from Japan abroad are outlined. Other projects carried out by the Japan International Cooperation Agency (JICA) are listed. Japan's long-term policy for safety technology development is outlined. 4 figs., 6 tabs.

  4. CO2 capture technologies: current status and new directions using supported ionic liquid phase (SILP) absorbers

    DEFF Research Database (Denmark)

    Kolding, Helene; Fehrmann, Rasmus; Riisager, Anders

    2012-01-01

    Current state-of-the-art techniques for CO2 capture are presented and discussed. Post-combustion capture of CO2 by absorption is the technology most easily retrofitted to existing installations, but at present this is not economically viable to install and run. Using ionic liquids instead...... candidate for CO2 absorption using SILP technology. Thus a solid SILP absorber comprised of 40 wt% [N6666][Pro] loaded on precalcined silica quantitatively takes up about 1.2 mole CO2 per mole of ionic liquid in consecutive absorption-desorption cycles in a flow-experiment performed with 0.09 bar of CO2 (9......% CO2 in He)....

  5. CO2 capture technologies: current status and new directions using supported ionic liquid phase (SILP) absorbers

    DEFF Research Database (Denmark)

    Kolding, Helene; Fehrmann, Rasmus; Riisager, Anders

    2012-01-01

    Current state-of-the-art techniques for CO2 capture are presented and discussed. Post-combustion capture of CO2 by absorption is the technology most easily retrofitted to existing installations, but at present this is not economically viable to install and run. Using ionic liquids instead...... candidate for CO2 absorption using SILP technology. Thus a solid SILP absorber comprised of 40 wt% [N6666][Pro] loaded on precalcined silica quantitatively takes up about 1.2 mole CO2 per mole of ionic liquid in consecutive absorption-desorption cycles in a flow-experiment performed with 0.09 bar of CO2 (9......% CO2 in He)....

  6. 惯性技术的研究现状与发展趋势分析%Research Status and Development Trend Analysis of Inertial Technology

    Institute of Scientific and Technical Information of China (English)

    江嘉宇

    2015-01-01

    Inertial technology is a comprehensive subject motion information and perception technology, the core and development of inertial technology is inertial navigation technology, this paper mainly focuses on the research status and development trend of inertial technology.%惯性技术是一种综合学科运动信息感知技术,惯性技术的核心和发展标志就是惯性导航技术,本文主要针对惯性技术的研究现状与发展趋势进行综合性分析。

  7. Housing and energy in Denmark

    DEFF Research Database (Denmark)

    Marsh, Rob; Grupe Larsen, Vibeke; Kragh, Mikkel

    2010-01-01

      This paper examines the historical background, current context and future challenges for housing energy consumption in Denmark. There has been a radical transformation in housing energy consumption over the last 30 years, with an absolute reduction in heat consumption and a rapid growth...... in electricity consumption, reflecting wider technological and social transformations in the movement from an industrial to a knowledge based society. In new housing it is shown that electricity consumption now dominates the total primary energy consumption, and that as a consequence traditional heat saving...... paradigms are relatively less effective, and can result in overheating and rising electricity consumption. At the same time, climate change concerns show that rising temperatures will in the future result in a falling heat demand and increasing cooling demand in housing. With this background, a theoretical...

  8. Status of Fuel Development and Manufacturing for Space Nuclear Reactors at BWX Technologies

    Science.gov (United States)

    Carmack, W. J.; Husser, D. L.; Mohr, T. C.; Richardson, W. C.

    2004-02-01

    New advanced nuclear space propulsion systems will soon seek a high temperature, stable fuel form. BWX Technologies Inc (BWXT) has a long history of fuel manufacturing. UO2, UCO, and UCx have been fabricated at BWXT for various US and international programs. Recent efforts at BWXT have focused on establishing the manufacturing techniques and analysis capabilities needed to provide a high quality, high power, compact nuclear reactor for use in space nuclear powered missions. To support the production of a space nuclear reactor, uranium nitride has recently been manufactured by BWXT. In addition, analytical chemistry and analysis techniques have been developed to provide verification and qualification of the uranium nitride production process. The fabrication of a space nuclear reactor will require the ability to place an unclad fuel form into a clad structure for assembly into a reactor core configuration. To this end, BWX Technologies has reestablished its capability for machining, GTA welding, and EB welding of refractory metals. Specifically, BWX Technologies has demonstrated GTA welding of niobium flat plate and EB welding of niobium and Nb-1Zr tubing. In performing these demonstration activities, BWX Technologies has established the necessary infrastructure to manufacture UO2, UCx, or UNx fuel, components, and complete reactor assemblies in support of space nuclear programs.

  9. Electric energy gun technology: status of the french-german-netherlands programme

    NARCIS (Netherlands)

    Kolkert, W.J.; Jamet, F.

    1999-01-01

    Research and technology development is being performed jointly in six subprograms. Next to operational aspects and system studies, railgun, coilgun and electrothermal gun launch is investigated. To power these future gun weapon systems, research on both energy storage, switching, pulse forming

  10. Electric energy gun technology: status of the french-german-netherlands programme

    NARCIS (Netherlands)

    Kolkert, W.J.; Jamet, F.

    1999-01-01

    Research and technology development is being performed jointly in six subprograms. Next to operational aspects and system studies, railgun, coilgun and electrothermal gun launch is investigated. To power these future gun weapon systems, research on both energy storage, switching, pulse forming netwo

  11. "Whose Child Is This?": Determining Legal Status for Lesbian Parents Who Used Assisted Reproductive Technologies

    Science.gov (United States)

    Hare, Jan; Skinner, Denise

    2008-01-01

    Assisted reproductive technologies (ARTs) have helped heterosexuals, lesbians, and gays fulfill desires to become parents. In this article, we identify assumptions upon which parentage rights in the United States are based. Examining recent legal decisions in California concerning 3 families headed by lesbian parents who used ARTs, we find that…

  12. Status of NIF mirror technologies for completion of the NIF facility

    Energy Technology Data Exchange (ETDEWEB)

    Stolz, C J

    2008-08-07

    The 1600 mirrors required for the National Ignition Facility (NIF) are now coated with the last optics currently being installed. The combined surface area of the NIF mirrors is almost 450 square meters, roughly 3.4 times greater than the surface area of the two Keck primary mirrors. Additionally, the power handling specification of NIF mirrors is 19 orders of magnitude greater than that of the Keck mirrors. The NIF laser will be at least 40x greater energy than the previous LLNL fusion laser called NOVA. To manufacture these mirrors, a number of new technologies (electrolytic in-situ dressing, ion figuring, source stabilization) were used that were not available for previous fusion laser optics. Post deposition technologies designed to increase laser resistance (off-line laser conditioning, solarization, air knives) have also been utilized. This paper summarizes the differences in technologies used to manufacture NIF mirrors from those used for previous fusion lasers and examines potential future technologies that would enable higher fluence operations and extend lifetimes.

  13. Recent status of fluidized bed technologies for producing iron input materials for steelmaking

    Institute of Scientific and Technical Information of China (English)

    Johannes Leopold Schenk

    2011-01-01

    Today steel is produced by two steelmaking processes,the basic oxygen furnace and the electric arc furnace. Three types of iron input materials for both processes are liquid hot metal or in solidified form as pig iron,direct reduced iron (DRI) and hot briquetted iron (HBI) as well as steel scrap. Hot metal,pig iron,DRI and HBI are virgin iron materials,which have to be produced from iron ore by the so-called ironmaking technologies.New ironmaking processes based on fluidized bed technology have been developed in the last two decades. The main advantage of these technologies is that fine ore can be directly used in the processes and prior treatment such as sintering or pelletizing can be avoided which is required for the established processes. Theoretical aspects for reduction of fine iron oxides in a fluidized bed reactor system will be explained. The fluidized bed reducing technologies utilized in the most advanced new ironmaking processes for direct use of fine ore,FINMET(R),Circored(R),FINEX(R) and Hlsmelt(R) will be compared.

  14. Electric energy gun technology: status of the french-german-netherlands programme

    NARCIS (Netherlands)

    Kolkert, W.J.; Jamet, F.

    1999-01-01

    Research and technology development is being performed jointly in six subprograms. Next to operational aspects and system studies, railgun, coilgun and electrothermal gun launch is investigated. To power these future gun weapon systems, research on both energy storage, switching, pulse forming netwo

  15. Status and applicability of solid polymer electrolyte technology to electrolytic hydrogen and oxygen production

    Science.gov (United States)

    Titterington, W. A.

    1973-01-01

    The solid polymer electrolyte (SPE) water electrolysis technology is presented as a potential energy conversion method for wind driven generator systems. Electrolysis life and performance data are presented from laboratory sized single cells (7.2 sq in active area) with high cell current density selected (1000 ASF) for normal operation.

  16. Status of The General Atomics Low Speed Urban Maglev Technology Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Gurol, S; Baldi, R; Bever, D; Post, R

    2004-06-16

    This paper presents the status of General Atomics Urban Maglev Program. The development provides an innovative approach for low speed transportation suitable for very challenging urban environments. Permanent magnets arranged in a 'Halbach' array configuration produce a relatively stiff magnetic suspension operating with an air gap of 25 mm. The project has progressed from design and prototype hardware testing, to the construction of a 120-meter full-scale test track, located in San Diego, California. Dynamic testing of the levitation, propulsion and guidance systems is being performed.

  17. Overcoming Residents Opportunity Apathy in Danish Social Housing Democracy

    DEFF Research Database (Denmark)

    Bertelsen, Olav W.

    2014-01-01

    In this paper, I discuss how various technologies can support democratic collaboration in the social housing sector in Denmark, and help overcome opportunity apathy. I exemplify the discussion with an ongoing process of strategy development, in a Danish housing organization....

  18. Technological Innovation and Competitiveness in The Global Economy: India's Changing Status and Its Implications

    Directory of Open Access Journals (Sweden)

    Bala Subrahmanya Mungila Hillemane

    2013-09-01

    Full Text Available   This paper probes the changing innovation status and resultant competitiveness in the context of global economy and questions the recent ranking improvements of India on the basis of hard economic facts. This paper has made use of secondary data comprising innovation indices and competitiveness rankings published by international organizations and reputed business schools from time to time since 1996 to analyze the changing status of India internationally. Later, using secondary data on key macro-economic variables published by the Government of India, the recent ranking of India is closely examined as well as recent steps taken by the government of India to improve competitiveness is elaborated. The study throws light on the changing but improving innovation dimensions and competitiveness ranking of India since 1996 till 2010. From nowhere India emerges and occupies the second slot, after China, in the global competitiveness ranking. But hard core macro-economic variables do not justify India’s elevation to the top in any way. Given this, the study throws light on the recent policy measures announced by the Government of India and its implications as well as policy imperatives.

  19. Clean Coal Technology Demonstration Program: Project fact sheets 2000, status as of June 30, 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    The Clean Coal Technology Demonstration Program (CCT Program), a model of government and industry cooperation, responds to the Department of Energy's (DOE) mission to foster a secure and reliable energy system that is environmentally and economically sustainable. The CCT Program represents an investment of over $5.2 billion in advanced coal-based technology, with industry and state governments providing an unprecedented 66 percent of the funding. With 26 of the 38 active projects having completed operations, the CCT Program has yielded clean coal technologies (CCTs) that are capable of meeting existing and emerging environmental regulations and competing in a deregulated electric power marketplace. The CCT Program is providing a portfolio of technologies that will assure that U.S. recoverable coal reserves of 274 billion tons can continue to supply the nation's energy needs economically and in an environmentally sound manner. As the nation embarks on a new millennium, many of the clean coal technologies have realized commercial application. Industry stands ready to respond to the energy and environmental demands of the 21st century, both domestically and internationally, For existing power plants, there are cost-effective environmental control devices to control sulfur dioxide (S02), nitrogen oxides (NO,), and particulate matter (PM). Also ready is a new generation of technologies that can produce electricity and other commodities, such as steam and synthetic gas, and provide efficiencies and environmental performance responsive to global climate change concerns. The CCT Program took a pollution prevention approach as well, demonstrating technologies that remove pollutants or their precursors from coal-based fuels before combustion. Finally, new technologies were introduced into the major coal-based industries, such as steel production, to enhance environmental performance. Thanks in part to the CCT Program, coal--abundant, secure, and economical

  20. Status of HgCdTe Barrier Infrared Detectors Grown by MOCVD in Military University of Technology

    Science.gov (United States)

    Kopytko, M.; Jóźwikowski, K.; Martyniuk, P.; Gawron, W.; Madejczyk, P.; Kowalewski, A.; Markowska, O.; Rogalski, A.; Rutkowski, J.

    2016-09-01

    In this paper we present the status of HgCdTe barrier detectors with an emphasis on technological progress in metalorganic chemical vapor deposition (MOCVD) growth achieved recently at the Institute of Applied Physics, Military University of Technology. It is shown that MOCVD technology is an excellent tool for HgCdTe barrier architecture growth with a wide range of composition, donor /acceptor doping, and without post-grown annealing. The device concept of a specific barrier bandgap architecture integrated with Auger-suppression is as a good solution for high-operating temperature infrared detectors. Analyzed devices show a high performance comparable with the state-of-the-art of HgCdTe photodiodes. Dark current densities are close to the values given by "Rule 07" and detectivities of non-immersed detectors are close to the value marked for HgCdTe photodiodes. Experimental data of long-wavelength infrared detector structures were confirmed by numerical simulations obtained by a commercially available software APSYS platform. A detailed analysis applied to explain dark current plots was made, taking into account Shockley-Read-Hall, Auger, and tunneling currents.

  1. Production of "Green Natural Gas" Using Solid Oxide Electrolysis Cells (SOEC): Status of Technology and Costs

    DEFF Research Database (Denmark)

    Mogensen, Mogens Bjerg; Jensen, Søren Højgaard; Ebbesen, Sune Dalgaard

    2012-01-01

    This paper gives arguments in favour of using green natural gas (GNG) as storage media for the intermittent renewable energy sources. GNG is here defined as being CH4, i.e. methane, often called synthetic natural gas or substitute natural gas (SNG), produced using renewable or at least CO2 neutral...... energy sources only. Also dimethyl ether (DME = (CH3)2O), which might be called Liquefied Green Gas, LGG, in analogy to Liquefied Petroleum Gas, LPG, because DME has properties similar to LPG. It further gives a short review of the state of the art of electrolysis in general and SOEC in particular....... Production of synthesis gas (H2 + CO) from CO2 and H2O using SOEC technology is evaluated. GNG and LGG can be produced from synthesis gas (or short: syngas) by means of well established commercially available catalysis technology. Finally, estimations of costs and efficiencies are presented and the relative...

  2. Three-dimensional display technologies of recent interest: principles, status, and issues [Invited].

    Science.gov (United States)

    Hong, Jisoo; Kim, Youngmin; Choi, Hee-Jin; Hahn, Joonku; Park, Jae-Hyeung; Kim, Hwi; Min, Sung-Wook; Chen, Ni; Lee, Byoungho

    2011-12-01

    Recent trends in three-dimensional (3D) display technologies are very interesting in that both old-fashioned and up-to-date technologies are being actively investigated together. The release of the first commercially successful 3D display product raised new research topics in stereoscopic display. Autostereoscopic display renders a ray field of a 3D image, whereas holography replicates a wave field of it. Many investigations have been conducted on the next candidates for commercial products to resolve existing limitations. Up-to-date see-through 3D display is a concept close to the ultimate goal of presenting seamless virtual images. Although it is still far from practical use, many efforts have been made to resolve issues such as occlusion problems.

  3. Status and recommendadtions for RD&D on energy storage technologies in a Danish context

    DEFF Research Database (Denmark)

    Elmegaard, Brian; Christensen, Claus Hviid; Kjøller, Claus

    2014-01-01

    . The work has been based on an assessment of the technical needs for energy storage in the future Danish energy system towards 2030 and further on. In particular, the report does not present new information or data on future economic performance of storage technologies. Within the given timeframes......The report briefly describes analyses of the future need for energy storage in a Danish perspective and assesses which sectors of the energy system, where energy storage can be expected to play a role and what kind of services it could provide to give flexibility in the sustainable energy system...... and resources for the work, it has also not been possible to provide an exhaustive catalogue or comprehensive descriptions of energy storage technologies....

  4. The United Nations Human Space Technology Initiative (HSTI): Activity Status in 2012

    CERN Document Server

    Ochiai, M; Haubold, H J; Doi, T

    2012-01-01

    In 2010, the Human Space Technology Initiative (HSTI) was launched by the United Nations Office for Outer Space Affairs (UNOOSA) within the United Nations Programme on Space Applications. The Initiative aims at promoting international cooperation in human spaceflight and space exploration-related activities, creating awareness among countries on the benefits of utilizing human space technology and its applications, and building capacity in microgravity education and research. HSTI has conducted a series of outreach activities and expert meetings bringing together participants from around the world. HSTI will also be implementing science and educational activities in relevant areas to raise the capacities, particularly in developing countries, in pursuit of the development goals of the United Nations, thus contributing to promoting the peaceful uses of outer space.

  5. Technologies for Arsenic Removal from Water: Current Status and Future Perspectives

    Directory of Open Access Journals (Sweden)

    Nina Ricci Nicomel

    2015-12-01

    Full Text Available This review paper presents an overview of the available technologies used nowadays for the removal of arsenic species from water. Conventionally applied techniques to remove arsenic species include oxidation, coagulation-flocculation, and membrane techniques. Besides, progress has recently been made on the utility of various nanoparticles for the remediation of contaminated water. A critical analysis of the most widely investigated nanoparticles is presented and promising future research on novel porous materials, such as metal organic frameworks, is suggested.

  6. Technologies for Arsenic Removal from Water: Current Status and Future Perspectives

    Science.gov (United States)

    Nicomel, Nina Ricci; Leus, Karen; Folens, Karel; Van Der Voort, Pascal; Du Laing, Gijs

    2015-01-01

    This review paper presents an overview of the available technologies used nowadays for the removal of arsenic species from water. Conventionally applied techniques to remove arsenic species include oxidation, coagulation-flocculation, and membrane techniques. Besides, progress has recently been made on the utility of various nanoparticles for the remediation of contaminated water. A critical analysis of the most widely investigated nanoparticles is presented and promising future research on novel porous materials, such as metal organic frameworks, is suggested. PMID:26703687

  7. Current status and future prospects for enabling chemistry technology in the drug discovery process

    Science.gov (United States)

    Djuric, Stevan W.; Hutchins, Charles W.; Talaty, Nari N.

    2016-01-01

    This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of “dangerous” reagents. Also featured are advances in the “computer-assisted drug design” area and the expanding application of novel mass spectrometry-based techniques to a wide range of drug discovery activities. PMID:27781094

  8. Current status and future prospects for enabling chemistry technology in the drug discovery process

    OpenAIRE

    Djuric, Stevan W.; Hutchins, Charles W; Talaty, Nari N.

    2016-01-01

    This review covers recent advances in the implementation of enabling chemistry technologies into the drug discovery process. Areas covered include parallel synthesis chemistry, high-throughput experimentation, automated synthesis and purification methods, flow chemistry methodology including photochemistry, electrochemistry, and the handling of “dangerous” reagents. Also featured are advances in the “computer-assisted drug design” area and the expanding application of novel mass spectrometry-...

  9. Regulatory Risk Reduction for Advanced Reactor Technologies – FY2016 Status and Work Plan Summary

    Energy Technology Data Exchange (ETDEWEB)

    Moe, Wayne Leland [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-08-01

    Millions of public and private sector dollars have been invested over recent decades to realize greater efficiency, reliability, and the inherent and passive safety offered by advanced nuclear reactor technologies. However, a major challenge in experiencing those benefits resides in the existing U.S. regulatory framework. This framework governs all commercial nuclear plant construction, operations, and safety issues and is highly large light water reactor (LWR) technology centric. The framework must be modernized to effectively deal with non-LWR advanced designs if those designs are to become part of the U.S energy supply. The U.S. Department of Energy’s (DOE) Advanced Reactor Technologies (ART) Regulatory Risk Reduction (RRR) initiative, managed by the Regulatory Affairs Department at the Idaho National Laboratory (INL), is establishing a capability that can systematically retire extraneous licensing risks associated with regulatory framework incompatibilities. This capability proposes to rely heavily on the perspectives of the affected regulated community (i.e., commercial advanced reactor designers/vendors and prospective owner/operators) yet remain tuned to assuring public safety and acceptability by regulators responsible for license issuance. The extent to which broad industry perspectives are being incorporated into the proposed framework makes this initiative unique and of potential benefit to all future domestic non-LWR applicants

  10. Combustion devices technology team - An overview and status of STME-related activities

    Science.gov (United States)

    Tucker, P. K.; Croteau-Gillespie, Margie

    1992-01-01

    The Consortium for CFD applications in propulsion technology has been formed at NASA/Marshall Space Flight Center. The combustion devices technology team is one of the three teams that constitute the Consortium. While generally aiming to advance combustion devices technology for rocket propulsion, the team's efforts for the last 1 and 1/2 years have been focused on issues relating to the Space Transportation Main Engine (STME) nozzle. The nozzle design uses hydrogen-rich turbine exhaust to cool the wall in a film/dump scheme. This method of cooling presents challenges and associated risks for the nozzle designers and the engine/vehicle integrators. Within the nozzle itself, a key concern is the ability to effectively and efficiently film cool the wall. From the National Launch System vehicle base standpoint, there are concerns with dumping combustible gases at the nozzle exit and their potential adverse effects on the base thermal environment. The Combustion Team has developed and is implementing plans to use validated CFD tools to aid in risk mitigation for both areas.

  11. Smart technologies for detecting animal welfare status and delivering health remedies for rangeland systems.

    Science.gov (United States)

    Rutter, S M

    2014-04-01

    Although the emerging field of precision livestock farming (PLF) is predominantly associated with intensive animal production, there is increasing interest in applying smart technologies in extensive rangeland systems. Precision livestock farming technologies bring the possibility of closely monitoring the behaviour, liveweight and other parameters of individual animals in free-ranging systems. 'Virtual fencing', ideally based on positive reinforcement, i.e. rewarding animals for moving in a specified direction, has the potential to gently guide foraging livestock towards areas of vegetation identified by remote sensing. As well as reducing hunger, this could be integrated with weather forecasting to help ensure that animals are automatically directed to areas with appropriate shelter when adverse weather is forecast. The system could also direct animals towards handling facilities when required, reducing the fear and distress associated with being mustered. The integration of the various data collected by such a 'virtual shepherd' system should be able to rapidly detect disease and injury, and sick animals could then be automatically shepherded to an enclosure for treatment. In general, rangeland livestock already have the freedom to express normal behaviour, but PLF technologies could facilitate this. By bringing levels of monitoring and control normally associated with intensive production to rangeland systems, PLF has the potential, with appropriate adoption, to enhance the capacity of rangeland livestock production systems to meet key areas of welfare concern highlighted by the Five Freedoms.

  12. Current status and potential of embryo transfer and reproductive technology in dairy cattle.

    Science.gov (United States)

    Hasler, J F

    1992-10-01

    Significant use of embryo transfer in dairy cattle commenced with the introduction of nonsurgical embryo recovery in the mid-1970s and developed with the use of nonsurgical transfers in the late 1970s. Numbers of registered Holstein calves from embryo transfer doubled yearly through 1980, after which the rate of increase slowed; the total reached nearly 19,000 calves in 1990. However, the efficacy of superovulation procedures and commercial success rates of transferred fresh embryos have not improved the past 10 to 15 yr. Fertilization rates in superovulated donors remain low. Although embryo-splitting techniques were perfected in the early 1980s, they are not used widely. A practical, commercial embryo-sexing procedure remains unavailable. Recent significant improvement is apparent in the technology of ultrasound-guided oocyte collection and in vitro oocyte maturation, fertilization, and embryo culture. In the future, this technology may be used in conjunction with sperm separated by sex with a flow cytometer. Modest numbers of embryo clones have been produced in several commercial programs via nuclear transfer techniques. However, the efficiency of gene transfer experiments involving ova of cattle and other domestic species has been low. Recently, DNA probe technology has begun to provide genotype information for cattle and will ultimately be applied to embryos.

  13. Food waste-to-energy conversion technologies: current status and future directions.

    Science.gov (United States)

    Pham, Thi Phuong Thuy; Kaushik, Rajni; Parshetti, Ganesh K; Mahmood, Russell; Balasubramanian, Rajasekhar

    2015-04-01

    Food waste represents a significantly fraction of municipal solid waste. Proper management and recycling of huge volumes of food waste are required to reduce its environmental burdens and to minimize risks to human health. Food waste is indeed an untapped resource with great potential for energy production. Utilization of food waste for energy conversion currently represents a challenge due to various reasons. These include its inherent heterogeneously variable compositions, high moisture contents and low calorific value, which constitute an impediment for the development of robust, large scale, and efficient industrial processes. Although a considerable amount of research has been carried out on the conversion of food waste to renewable energy, there is a lack of comprehensive and systematic reviews of the published literature. The present review synthesizes the current knowledge available in the use of technologies for food-waste-to-energy conversion involving biological (e.g. anaerobic digestion and fermentation), thermal and thermochemical technologies (e.g. incineration, pyrolysis, gasification and hydrothermal oxidation). The competitive advantages of these technologies as well as the challenges associated with them are discussed. In addition, the future directions for more effective utilization of food waste for renewable energy generation are suggested from an interdisciplinary perspective. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. 76 FR 63355 - Proposed Information Collection (Regulation on Application for Fisher Houses and Other Temporary...

    Science.gov (United States)

    2011-10-12

    ... Information Collection (Regulation on Application for Fisher Houses and Other Temporary Lodging and VHA Fisher House Application); Comment Request AGENCY: Veterans Health Administration, Department of Veterans... use of other forms of information technology. Title: Regulation on Application for Fisher Houses...

  15. American Housing Survey (AHS)

    Data.gov (United States)

    Department of Housing and Urban Development — The AHS is the largest, regular national housing sample survey in the United States. The U.S. Census Bureau conducts the AHS to obtain up-to-date housing statistics...

  16. TARP Monthly Housing Scorecard

    Data.gov (United States)

    Department of the Treasury — Treasury and the U.S. Department of Housing and Urban Development (HUD) jointly produce a Monthly Housing Scorecard on the health of the nation’s housing market. The...

  17. Deadline Compliance Status Reports

    Data.gov (United States)

    Department of Housing and Urban Development — These monthly Deadline Compliance Status Reports assist Participating Jurisdictions and HUD Field Offices in monitoring compliance with the 2-year commitment and...

  18. The European ITER Test Blanket Modules: Current status of fabrication technologies development and a way forward

    Energy Technology Data Exchange (ETDEWEB)

    Zmitko, Milan, E-mail: milan.zmitko@f4e.europa.eu [Fusion for Energy (F4E), Josep Pla 2, Barcelona (Spain); Galabert, Jose [Fusion for Energy (F4E), Josep Pla 2, Barcelona (Spain); Thomas, Noël [ATMOSTAT, F-94815 Villejuif (France); Forest, Laurent [CEA-Saclay, DEN, DM2S, SEMT, F-91191 Gif-sur-Yvette (France); Bucci, Philippe; Cogneau, Laurence [CEA-DRT, 38000 Grenoble (France); Rey, Jörg; Neuberger, Heiko [Karlsruhe Institute of Technology (KIT), Postfach 3640, Karlsruhe (Germany); Poitevin, Yves [Fusion for Energy (F4E), Josep Pla 2, Barcelona (Spain)

    2015-10-15

    Highlights: • Significant progress on development of welding procedures for European TBM achieved. • Fabrication processes feasibility based on diffusion and fusion welding demonstrated. • TBM box assembly welding scenarios investigated and welding scenarios identified. • Future qualification of pF/WPS proposed through realization of a number of QMUs. - Abstract: The paper reviews fabrication technologies and procedures applied for manufacturing of the TBM sub-components, like, HCLL and HCPB cooling plates, HCLL/HCPB stiffening plates, and HCLL/HCPB first wall and side caps. The used technologies are based on fusion and diffusion welding techniques taking into account specificities of the EUROFER-97 steel. Development of a standardized procedure complying with professional codes and standards (RCC-MRx), a preliminary fabrication/welding procedure specification (pF/WPS), is described as well as a fabrication and characterization of feasibility mock-ups (FMU) aimed at assessing the suitability of a fabrication process for fulfilling the design and fabrication specifications. Also, fabrication procedures for the TBM box assembly are presently under development through collaboration between European Fusion Laboratories and Industry for the establishment of an optimized assembly sequence/scenario and development of standardized welding procedure specifications. Selection of optimized assembly scenario takes into accounts not only the design requirements and fabrication possibilities/constraints but also maximum accessibility to the welds for sound non-destructive examination in compliance with welds classification. A future approach towards qualification of the developed fabrication technologies and procedures, through a number of medium to full-size qualification mock-ups according to European standards, is outlined before construction of the first TBMs.

  19. Myrrha, Technology Development for the Realisation of ADS in Eu:. Current Status & Prospects for Realisation

    Science.gov (United States)

    Fernandez, R.; Abderrahim, H. Aït; Baeten, P.; de Bruyn, D.; Maes, D.; Mazouzi, A. Al; Ariën, B.; Malambu, E.; Schuurmans, P.; Schyns, M.; Sobolev, V.; van den Eynde, G.; Vandeplassche, D.

    2010-06-01

    The coupling between an accelerator, a spallation target and a subcritical core has been studied for the first time at SCK•CEN in collaboration with Ion Beam Applications (IBA, Louvain-la-Neuve) in the frame of the ADONIS project (1995-1997). ADONIS was a small irradiation facility, based on the ADS concept, having a dedicated objective to produce radioisotopes for medical purposes and more particularly 99Mo as a fission product from highly enriched 235U (HEU) fissile targets. The ad-hoc scientific advisory committee recommended extending the purpose of the ADONIS machine to become a Material Testing Reactor (MTR) for material and fuel research, to study the feasibility of transmutation of the minor actinides and to demonstrate at a reasonable power scale the principle of the ADS. The project, since 1998 named MYRRHA, has then evolved to a larger installation. MYRRHA is now conceived as a flexible irradiation facility, able to work as an Accelerator Driven (subcritical mode) and in critical mode. In this way, MYRRHA will allow fuel developments for innovative reactor systems, material developments for GEN IV systems, material developments for fusion reactors, radioisotope production for medical and industrial applications and industrial applications, such as Si-doping. MYRRHA will also demonstrate the ADS full concept by coupling the three components (accelerator, spallation target and subcritical reactor) at reasonable power level to allow operation feedback, scalable to an industrial demonstrator and allow the study of efficient transmutation of high-level nuclear waste. Since MYRRHA is based on the heavy liquid metal technology, the eutectic lead-bismuth, it will be able to significantly contribute to the development of Lead Fast Reactor Technology. Since MYRRHA will also be operated in critical mode, MYRRHA can even better play the role of European Technology Pilot Plant in the roadmap for LFR.

  20. Development Status-quo of Centrifugal Spinning Technology%离心纺丝技术的发展现状

    Institute of Scientific and Technical Information of China (English)

    黄冬徽; 陈廷; 吴丽莉

    2014-01-01

    离心纺丝是一种利用离心力进行纺丝的新型微纳米纤维制备技术。本文介绍了离心纺丝的基本原理,综述了离心纺丝设备的发展现状,阐述了纺丝过程中工艺参数对纤维的形貌、直径及结晶度的影响。%Centrifugal spinning is a new micro-nano fiber manufacturing technology by the use of centrifugal force. The fundamental principle of centrifugal spinning and development status-quo of the centrifugal spinning equipments were introduced in this paper. Besides, the effects of the process parameters on the morphology, diameter and crystallinity of fibers were stated.

  1. A Status Review of the Commercial Supersonic Technology (CST) Aeroservoelasticity (ASE) Project

    Science.gov (United States)

    Silva, Walter A.; Sanetrik, Mark D.; Chwalowski, Pawel; Funk, Christy; Keller, Donald F.; Ringertz, Ulf

    2016-01-01

    An overview of recent progress regarding the computational aeroelastic and aeroservoelastic (ASE) analyses of a low-boom supersonic configuration is presented. The overview includes details of the computational models developed to date with a focus on unstructured CFD grids, computational aeroelastic analyses, sonic boom propagation studies that include static aeroelastic effects, and gust loads analyses. In addition, flutter boundaries using aeroelastic Reduced-Order Models (ROMs) are presented at various Mach numbers of interest. Details regarding a collaboration with the Royal Institute of Technology (KTH, Stockholm, Sweden) to design, fabricate, and test a full-span aeroelastic wind-tunnel model are also presented.

  2. Status of corrective measures technology for shallow land burial at arid sites

    Science.gov (United States)

    Abeele, W. V.; Nyhan, J. W.; Drennon, B. J.; Lopez, E. A.; Herrera, W. J.; Langhorst, G. J.

    The field research program involving corrective measure technologies for arid shallow land burial sites is described. Soil erosion and infiltration of water into a simulated trench cap with various surface treatments was measured and compared with similar data from agricultural systems across the United States. Report of field testing of biointrusion barriers continues at a closed-out waste disposal site at Los Alamos. Final results of an experiment designed to determine the effects of subsidence on the performance of a cobble-gravel biobarrier system are reported, as well as the results of hydrologic modeling activities involving biobarrier systems.

  3. Toward Production From Gas Hydrates: Current Status, Assessment of Resources, and Simulation-Based Evaluationof Technology and Potential

    Energy Technology Data Exchange (ETDEWEB)

    Reagan, Matthew; Moridis, George J.; Collett, Timothy; Boswell, Ray; Kurihara, M.; Reagan, Matthew T.; Koh, Carolyn; Sloan, E. Dendy

    2008-02-12

    Gas hydrates are a vast energy resource with global distribution in the permafrost and in the oceans. Even if conservative estimates are considered and only a small fraction is recoverable, the sheer size of the resource is so large that it demands evaluation as a potential energy source. In this review paper, we discuss the distribution of natural gas hydrate accumulations, the status of the primary international R&D programs, and the remaining science and technological challenges facing commercialization of production. After a brief examination of gas hydrate accumulations that are well characterized and appear to be models for future development and gas production, we analyze the role of numerical simulation in the assessment of the hydrate production potential, identify the data needs for reliable predictions, evaluate the status of knowledge with regard to these needs, discuss knowledge gaps and their impact, and reach the conclusion that the numerical simulation capabilities are quite advanced and that the related gaps are either not significant or are being addressed. We review the current body of literature relevant to potential productivity from different types of gas hydrate deposits, and determine that there are consistent indications of a large production potential at high rates over long periods from a wide variety of hydrate deposits. Finally, we identify (a) features, conditions, geology and techniques that are desirable in potential production targets, (b) methods to maximize production, and (c) some of the conditions and characteristics that render certain gas hydrate deposits undesirable for production.

  4. An Assessment of the Status of Captive Broodstock Technology of Pacific Salmon, 1995 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Flagg, Thomas A.; Mahnaken, Conrad V.W.; Hard, Jeffrey J.

    1995-06-01

    This report provides guidance for the refinement and use of captive broodstock technology for Pacific salmon (Oncorhynchus spp.) by bringing together information on the husbandry techniques, genetic risks, physiology, nutrition, and pathology affecting captive broodstocks. Captive broodstock rearing of Pacific salmon is an evolving technology, as yet without well defined standards. At present, we regard captive rearing of Pacific salmon as problematic: high mortality rates and low egg viability were common in the programs we reviewed for this report. One of the most important elements in fish husbandry is the culture environment itself. Many captive broodstock programs for Pacific salmon have reared fish from smolt-to-adult in seawater net-pens, and most have shown success in providing gametes for recovery efforts. However, some programs have lost entire brood years to diseases that transmitted rapidly in this medium. Current programs for endangered species of Pacific salmon rear most fish full-term to maturity in fresh well-water, since ground water is low in pathogens and thus helps ensure survival to adulthood. Our review suggested that captive rearing of fish in either freshwater, well-water, or filtered and sterilized seawater supplied to land-based tanks should produce higher survival than culture in seawater net-pens.

  5. In Situ Mercury Stabilization (ISMS) Treatment: Technology Maturation Project Phase I Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Kalb,P.D.; Milian, L.

    2008-03-01

    Mercury (Hg) was used to separate lithium-6 isotope for weapons production at the Y-12 Plant in Oak Ridge in the 1950s and 1960s. As much as two million pounds of elemental mercury was 'lost' or unaccounted for and a large portion of that material is believed to have entered the environment. The DOE site office in Oak Ridge has identified Hg pollution in soils, sediments, and streams as the most significant environmental challenge currently faced. In industry, large amounts of mercury have been used to manufacture products (e.g., fluorescent light bulbs, thermometers) and for chemical processing (e.g., production of chlorine and alkali via mercury electrochemical cells) and many of these industrial sites are now polluted with mercury contaminated soil as a result of previous releases and/or inadvertent leaks. Remediation techniques for Hg contaminated soils are either based on thermal desorption and recovery of the mercury or excavation and shipping of large volumes of material to remote facilities for treatment and disposal. Both of these alternatives are extremely costly. The Brookhaven National Laboratory (BNL) Environmental Research & Technology Division (ERTD) has demonstrated, in laboratory-scale experiments, the viability of treating mercury contaminated soils by means of sulfide treatment rods inserted into the soil through a process known as In Situ Mercury Stabilization (ISMS). This approach is partly based on BNL's patented and successfully licensed ex situ process for Hg treatment, Sulfur Polymer Stabilization/Solidification (SPSS) which converts Hg to the more stable sulfide form. The original experiments showed that Hg homogeneously distributed in soil rapidly migrates to form a high concentration zone of chemically stable mercuric sulfide near the treatment rods while concentrations of Hg in surrounding areas away from the treatment rods are depleted to acceptable levels. BSA has subsequently filed for patent protection on the ISMS

  6. Light Water Reactor Sustainability Program Status of Silicon Carbide Joining Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Shannon M. Bragg-Sitton

    2013-09-01

    Advanced, accident tolerant nuclear fuel systems are currently being investigated for potential application in currently operating light water reactors (LWR) or in reactors that have attained design certification. Evaluation of potential options for accident tolerant nuclear fuel systems point to the potential benefits of silicon carbide (SiC) relative to Zr-based alloys, including increased corrosion resistance, reduced oxidation and heat of oxidation, and reduced hydrogen generation under steam attack (off-normal conditions). If demonstrated to be applicable in the intended LWR environment, SiC could be used in nuclear fuel cladding or other in-core structural components. Achieving a SiC-SiC joint that resists corrosion with hot, flowing water, is stable under irradiation and retains hermeticity is a significant challenge. This report summarizes the current status of SiC-SiC joint development work supported by the Department of Energy Light Water Reactor Sustainability Program. Significant progress has been made toward SiC-SiC joint development for nuclear service, but additional development and testing work (including irradiation testing) is still required to present a candidate joint for use in nuclear fuel cladding.

  7. Human dignity and transhumanism: do anthro-technological devices have moral status?

    Science.gov (United States)

    Jotterand, Fabrice

    2010-07-01

    In this paper, I focus on the concept of human dignity and critically assess whether such a concept, as used in the Universal Declaration on Bioethics and Human Rights, is indeed a useful tool for bioethical debates. However, I consider this concept within the context of the development of emerging technologies, that is, with a particular focus on transhumanism. The question I address is not whether attaching artificial limbs or enhancing particular traits or capacities would dehumanize or undignify persons but whether nonbiological entities introduced into or attached to the human body contribute to the "augmentation" of human dignity. First, I outline briefly how the Universal Declaration on Bioethics and Human Rights uses the concept of dignity. Second, I look at the possibility of a universal bioethics in relation to the concept of human dignity. Third, I examine the concept of posthuman dignity and whether the concept of human dignity as construed in the declaration has any relevance to posthuman dignity.

  8. The development and current status of the technology of isotope and radiation in China

    Energy Technology Data Exchange (ETDEWEB)

    Jinrong, Z. [China Institute of Atomic Energy, Beijing, (China). Department of Isotopes

    1997-10-01

    The research and applications of isotope technology and radiation sources in China are presented. Many effort were directed towards production of radiopharmaceuticals, radiation sources, radiation treatment and radioactive tracers. Reactor and accelerator produced radioisotopes contributed to and will further accelerate the development of nuclear medicine in China. Recently, much attention has been paid on tumor therapy mainly with radiolabelled monoclonal antibody, radiolabelled microsphere and colloid, bone-seeking agents, and radiolabelled Octreotide. Radioimmunoassay has been widely used with many convenient kits available. There are above 30 radioimmunoassay kit produces and more than 60 radioimmunoassay centers. Recently the advance is mainly in solid-phase separation process and in radioimmunoassay method, including some nonradioactive immunoassay methods, such as enzyme immunoassay, fluorescence immunoassay, and chemiluminescence immunoassay. Kits for enzyme immunoassay have been put into clinical use. Various radiation sources are produced for medical purposes and for use in nuclear power stations 4 refs., 8 tabs.

  9. Current Status of World Nuclear Fuel Cycle Technology (I): Canada and Latin America

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Hang Bok; Ko, Won Il

    2007-05-15

    Canada produces about one third of the world's uranium mine output, most of it from two new mines. After 2007 Canadian production is expected to increase further as more new mines come into production. About 15% of Canada's electricity comes from nuclear power, using indigenous technology, and 18 reactors provide over 12,500 MWe of power. Mexico has two nuclear reactors generating almost 5% of its electricity. Its first commercial nuclear power reactor began operating in 1989. There is some government support for expanding nuclear energy to reduce reliance on natural gas. Argentina has two nuclear reactors generating nearly one tenth of its electricity. Its first commercial nuclear power reactor began operating in 1974. Brazil has two nuclear reactors generating 4% of its electricity. Its first commercial nuclear power reactor began operating in 1982.

  10. Heat-shield for Extreme Entry Environment Technology (HEEET) Development Status

    Science.gov (United States)

    Venkatapathy, Ethiraj; Ellerby, Don; Gage, Peter

    2016-01-01

    The Heat shield for Extreme Entry Environment Technology (HEEET) Project is a NASA STMD and SMD co-funded effort. The goal is to develop and mission infuse a new ablative Thermal Protection System that can withstand extreme entry. It is targeted to support NASA's high priority missions, as defined in the latest decadal survey, to destinations such as Venus and Saturn in-situ robotic science missions. Entry into these planetary atmospheres results in extreme heating. The entry peak heat-flux and associated pressure are estimated to be between one and two orders of magnitude higher than those experienced by Mars Science Laboratory or Lunar return missions. In the recent New Frontiers community announcement NASA has indicated that it is considering providing an increase to the PI managed mission cost (PIMMC) for investigations utilizing the Heat Shield for Extreme Entry Environment Technology (HEEET) and in addition, NASA is considering limiting the risk assessment to only their accommodation on the spacecraft and the mission environment. The HEEET ablative TPS utilizes 3D weaving technology to manufacture a dual layer material architecture. The 3-D weaving allows for flat panels to be woven. The dual layer consists of a top layer designed to withstand the extreme external environment while the inner or insulating layer by design, is designed to achieve low thermal conductivity, and it keeps the heat from conducting towards the structure underneath. Both arc jet testing combined with material properties have been used to develop thermal response models that allows for comparison of performance with heritage carbon phenolic. A 50% mass efficiency is achieved by the dual layer construct compared to carbon phenolic for a broad range of missions both to Saturn and Venus. The 3-D woven flat preforms are molded to achieve the shape as they are compliant and then resin infusion with curing forms a rigid panels. These panels are then bonded on to the aeroshell structure. Gaps

  11. Regenerative medicine technology applied to gastroenterology: Current status and future perspectives

    Institute of Scientific and Technical Information of China (English)

    Giuseppe Orlando

    2012-01-01

    This special issue of World Journal of Gastroenterology has been conceived to illustrate to gastroenterology operators the role that regenerative medicine (RM) will have in the progress of gastrointestinal (GI) medicine.RM is a multidisciplinary field aiming to replace,regenerate or repair diseased tissues or organs.The past decade has been marked by numerous ground-breaking achievements that led experts in the field to manufacture functional substitutes of relatively simple organs.This progress is paving the ground for investigations that aims to the bioengineering and regeneration of more complex organs like livers,pancreas and intestine.In this special issue,the reader will be introduced,hand-in-hand,to explore the field of RM and will be educated on the progress,pitfalls and promise of RM technologies as applied to GI medicine.

  12. Evidence-Based Point-of-Care Diagnostics: Current Status and Emerging Technologies

    Science.gov (United States)

    Chan, Cangel Pui Yee; Mak, Wing Cheung; Cheung, Kwan Yee; Sin, King Keung; Yu, Cheuk Man; Rainer, Timothy H.; Renneberg, Reinhard

    2013-06-01

    Point-of-care (POC) diagnostics brings tests nearer to the site of patient care. The turnaround time is short, and minimal manual interference enables quick clinical management decisions. Growth in POC diagnostics is being continuously fueled by the global burden of cardiovascular and infectious diseases. Early diagnosis and rapid initiation of treatment are crucial in the management of such patients. This review provides the rationale for the use of POC tests in acute coronary syndrome, heart failure, human immunodeficiency virus, and tuberculosis. We also consider emerging technologies that are based on advanced nanomaterials and microfluidics, improved assay sensitivity, miniaturization in device design, reduced costs, and high-throughput multiplex detection, all of which may shape the future development of POC diagnostics.

  13. Status on Technology Development of Optic Fiber-Coupled Laser Ignition System for Rocket Engine Applications

    Science.gov (United States)

    Trinh, Huu P.; Early, Jim; Osborne, Robin; Thomas, Matthew; Bossard, John

    2003-01-01

    To pursue technology developments for future launch vehicles, NASA/Marshall Space Flight Center (MSFC) is examining vortex chamber concepts for liquid rocket engine applications. Past studies indicated that the vortex chamber schemes potentially have a number of advantages over conventional chamber methods. Due to the nature of the vortex flow, relatively cooler propellant streams tend to flow along the chamber wall. Hence, the thruster chamber can be operated without the need of any cooling techniques. This vortex flow also creates strong turbulence, which promotes the propellant mixing process. Consequently, the subject chamber concept: not only offer system simplicity, but also enhance the combustion performance. Test results have shown that chamber performance is markedly high even at a low chamber length-to-diameter ratio. This incentive can be translated to a convenience in the thrust chamber packaging.

  14. Intimate partner violence and housing instability.

    Science.gov (United States)

    Pavao, Joanne; Alvarez, Jennifer; Baumrind, Nikki; Induni, Marta; Kimerling, Rachel

    2007-02-01

    The mental and physical health consequences of intimate partner violence (IPV) have been well established, yet little is known about the impact of violence on a woman's ability to obtain and maintain housing. This cross-sectional study examines the relationship between recent IPV and housing instability among a representative sample of California women. It is expected that women who have experienced IPV will be at increased risk for housing instability as evidenced by: (1) late rent or mortgage, (2) frequent moves because of difficulty obtaining affordable housing, and/or (3) without their own housing. Data were taken from the 2003 California Women's Health Survey, a population-based, random-digit-dial, annual probability survey of adult California women (N=3619). Logistic regressions were used to predict housing instability in the past 12 months, adjusting for the following covariates; age, race/ethnicity, education, poverty status, marital status, children in the household, and past year IPV. In the multivariate model, age, race/ethnicity, marital status, poverty, and IPV were significant predictors of housing instability. After adjusting for all covariates, women who experienced IPV in the last year had almost four times the odds of reporting housing instability than women who did not experience IPV (adjusted odds ratio=3.98, 95% confidence interval: 2.94-5.39). This study found that IPV was associated with housing instability among California women. Future prospective studies are needed to learn more about the nature and direction of the relationship between IPV and housing instability and the possible associated negative health consequences.

  15. International activities in DMFC R&D: status of technologies and potential applications

    Science.gov (United States)

    Dillon, R.; Srinivasan, S.; Aricò, A. S.; Antonucci, V.

    Technological improvements in direct methanol fuel cells (DMFCs) are fuelled by their exciting possibilities in portable, transportation and stationary applications. In this paper, a synopsis of the worldwide efforts resulting in inventions of a plethora of DMFC prototypes with low, medium and high power capacities by a number of Companies, Research Institutions and Universities is presented. The most promising short term application of DMFCs appears to involve the field of portable power sources. Recent advances in the miniaturization technology of DMFCs devices make these systems attractive to replace the current Li-ion batteries. In the field of electrotraction recent demonstration of DMFC stacks with specific power densities and efficiencies approaching those of the combined system methanol reformer-polymer electrolyte fuel cell (PEMFC) have stimulated further investigation on the development of materials with higher performance and lower cost. The most appropriate range of operation temperatures for applications in transportation appears to lie between 100 and 150 °C. These operating conditions may be sustained by using new high temperature electrolyte membranes or composite perfluorosulfonic membranes containing inorganic materials with water retention properties at high temperature. The most challenging problem for the development of DMFCs is the enhancement of methanol oxidation kinetics. At present, there are no practical alternatives to Pt-based catalysts. High noble metal loading on the electrodes and the use of perfluorosulfonic membranes significantly contribute to the cost of these devices. Critical areas include the design of appropriate membrane electrode assemblies for specific DMFC applications and the reduction of methanol cross-over. This latter aspect is strictly related to the use of membrane alternatives to Nafion, but it may also be conveniently addressed by the development of methanol-tolerant oxygen reduction catalysts.

  16. High energy physics advisory panel`s composite subpanel for the assessment of the status of accelerator physics and technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    In November 1994, Dr. Martha Krebs, Director of the US Department of Energy (DOE) Office of Energy Research (OER), initiated a broad assessment of the current status and promise of the field of accelerator physics and technology with respect to five OER programs -- High Energy Physics, Nuclear Physics, Basic Energy Sciences, Fusion Energy, and Health and Environmental Research. Dr. Krebs asked the High Energy Physics Advisory Panel (HEPAP) to establish a composite subpanel with representation from the five OER advisory committees and with a balance of membership drawn broadly from both the accelerator community and from those scientific disciplines associated with the OER programs. The Subpanel was also charged to provide recommendations and guidance on appropriate future research and development needs, management issues, and funding requirements. The Subpanel finds that accelerator science and technology is a vital and intellectually exciting field. It has provided essential capabilities for the DOE/OER research programs with an enormous impact on the nation`s scientific research, and it has significantly enhanced the nation`s biomedical and industrial capabilities. Further progress in this field promises to open new possibilities for the scientific goals of the OER programs and to further benefit the nation. Sustained support of forefront accelerator research and development by the DOE`s OER programs and the DOE`s predecessor agencies has been responsible for much of this impact on research. This report documents these contributions to the DOE energy research mission and to the nation.

  17. A review on the current status and production technology for {sup 188}W-{sup 188}Re generator system

    Energy Technology Data Exchange (ETDEWEB)

    Kuznetsov, R. A.; Han, H. S.; Cho, W. K.; Park, U. J.; Kim, Y. M

    1998-11-01

    The current status of {sup 188}W-{sup 188}Re generator production technology were reviewed in PART 1. Main interests were given to the aspects of {sup 188}W reactor production, irradiated targets reprocessing and generator loading technologies, such as alumina type and gel type generators. In order to develop the more convenient and advanced {sup 188}W-{sup 188}Re generator, further studies must be carried out to get the precise evaluation of production and burn-up cross section of {sup 188}W, the more easily realizable generator loading procedure, and also to optimize the column and generator design to compensate the deterioration of generator performance because of parent radionuclide decay. By irradiation of {sup 186}W enriched sample, {sup 188}W-{sup 188}Re generator production experiments were performed to evaluate the possibility of {sup 188}W-{sup 188}Re generator production using HANARO, and PART 2 describes about the experiments. The experimental results shows the possibility of practical {sup 188}W-{sup 188}Re generator production using of low-specific activity {sup 188}W produced in HANARO. (author). 79 refs., 4 tabs., 26 figs.

  18. Application and Research Status of Alternative Materials for 3D-printing Technology

    Directory of Open Access Journals (Sweden)

    WANG Yanqing

    2016-08-01

    Full Text Available Application features and research status of alternative 3D-printing materials for six typical 3D-printingtechniques were reviewed. From the point of view of physical forms, four kinds of materials of liquid photosensitive resin material, thin sheet material (paper or plastic film , low melting point filament material and powder material are included. And from the composition point of view, nearly all kinds of materials in the production and life are included such as polymer materials: plastic, resin, wax; metal and alloy materials; ceramic materials. Liquid photosensitive resin material is used for stereo lithigraphy apparatus(SLA; thin sheet materials such as paper or plastic film are used for laminated object manufacturing(LOM; low melting point polymer filament materials such as wax filament, polyolefin resin filament, polyamide filament and ABS filament are used for fused deposition modeling(FDM; very wide variety powder materials including nylon powder, nylon-coated glass powder, polycarbonate powder, polyamide powder, wax powder, metal powder(Re-sintering and infiltration of copper are needed after sintering, wax-coated ceramic powder, wax-coated metal powder and thermosetting resin-coated fine sand are used for selective laser sintering(SLS. Nearly the same above powder materials are used for selective laser melting(SLM, but the printed parts own much more higher density and better mechanical properties. Powder materials are likewise used for threedimensional printing and gluing(3DP, however, the powders are stuck together by tricolor binder sprayed through nozzle and cross-section shape of the part is color-printed on it. Finally, the development direction in both quality and the yield of 3D-printing materials were pointed out to be a bottle-neck issue and a hot topic in the field of 3D-printing.

  19. POST-CRISIS HOUSING MARKET PROBLEMS

    Directory of Open Access Journals (Sweden)

    A. L. Sadikov

    2011-01-01

    Full Text Available At present, Russian housing market is characterized, on one hand, with acute shortage of dwellings for absolute majority of the population and on the other hand, with existence of many obstacles that block the market to develop so as to solve this problem. Housing market development trends are discussed along with due consideration of the state housing policy. There are several main directions of this development: increasing scope of little-story and economy class buildings, increased use of resource-saving technologies and widening the practice of public-private partnership. At the same time, state financial support to housing construction is planned to get gradually decreased.

  20. 基于中间技术的保障性住宅可变多适性设计方法%Design pointing on Variable adaptability of Indemnificatory Housing-Based on Intermediate technology

    Institute of Scientific and Technical Information of China (English)

    周曦; 张芳

    2014-01-01

    Nowadays plenty of Indemnificatory Houses in smal Huxing have been build in China. For variable needs of the users and the adaptability for future upgrade, the house type of Indemnificatory Housing should base on the existing condition, develop and use the Intermediate technology to achieve variable adaptability. The inside of the apartment design may focus on the living room, leaving kitchen and dinning room mix the rest area, moreover, toilet and bathroom can be adapted with simple technical facilities, and the entire apartment spatial ar angement can be organized with gal ery. The public sector should also leave feasibility for future adaptability.%近年来我国建设了大量小套型保障性住宅。为了适应住户的多样化需求和未来升级改造的需要,保障性住宅套型设计中应结合目前条件,发展中间技术实现有限的可变多适性设计。套型内以居室空间为主,餐厨空间融合,卫浴设施采用简单的技术措施实现可调节;套间组合宜采用简单统一的通廊形式。此外公共部分还应留有升级改造空间。

  1. Housing tenure, residential moves and children's educational ...

    African Journals Online (AJOL)

    Housing tenure, residential moves and children's educational performance in Accra, Ghana. ... Journal of Science and Technology (Ghana) ... a positive home ownership effect and a negative residential moves effect remain with significant ...

  2. Science for development: a housing case study

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2007-10-01

    Full Text Available housing. This approach maximizes the various scales at which projects of this kind operate by providing rigorous proof of concept for integrated, community-based, innovative technology interventions to meet the community goals of a developmental state...

  3. 24 CFR 982.609 - Congregate housing: Housing quality standards.

    Science.gov (United States)

    2010-04-01

    ... Types Congregate Housing § 982.609 Congregate housing: Housing quality standards. (a) HQS standards for... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Congregate housing: Housing quality standards. 982.609 Section 982.609 Housing and Urban Development Regulations Relating to Housing and...

  4. The Application of Passive Technology on Rural Houses in Severe Cold Regions%被动式技术在严寒地区农村住宅中的应用研究

    Institute of Scientific and Technical Information of China (English)

    金虹; 邵腾; 金雨蒙; 康健

    2016-01-01

    With villagers’ increasing demand for living environment and the lacking of energy in rural area, the energy-saving design for rural houses has become an important part of new rural construction. Under the background of imbalanced urban-rural development and rural economy-technology backward, the passive technologies are easily accepted by villagers with the characteristic of low cost and low technology. This paper, based on the engineering practice of rural house design in severe cold regions, analyzes the application and implementation effect of passive energy-saving technology, passive solar energy utilization technology and passive ventilation technology on the rural houses. It aims to provide guidances for the rural house’s passive energy-saving design, and thus promote the sustainable development of new rural construction in severe cold regions.%随着农民对居住环境日益提高的要求及农村能源的缺乏,农村住宅的节能设计已成为新农村建设中的一项重要内容。在城乡发展不均衡、农村经济技术相对落后的背景下,被动式技术以其低成本、低技术的特征易于被农民所接受。本文结合课题组在严寒地区农村住宅设计方面的工程实践,分析了被动式节能技术、被动式太阳能利用技术、被动式通风技术在农村住宅中的应用及实施效果,旨在为严寒地区农村住宅的被动式节能设计提供指导,从而推动严寒地区新农村建设的可持续发展。

  5. Research status of the manufacturing technology and application properties of Bi-2223/Ag tapes at Innost

    Science.gov (United States)

    Yi, H. P.; Han, Z.; Zhang, J. S.; Liu, T.; Liu, L.; Li, M. Y.; Fang, J.; Liu, Q.; Zheng, Y. K.

    2004-10-01

    The first production line of Bi-2223/Ag tapes in China has been installed in the end of 2001 with an annual production capacity of 200 km at Innova Superconductor Technology Co., Ltd. (Innost). Bi-2223/Ag tapes can be manufactured reproducibly with length up to 1 km, critical current Ic over 90 A (77 K, 0 T) and engineering critical current density Je over 9 kA/cm 2. Innost's Bi-2223/Ag tapes are being used for producing China's first HTS power cable system (30 m, 3 phase, 35 kV/25 kA), which will be put into trial operation next year. Also, Innost's products will be used for other research projects of HTS applications such as HTS motor, HTS magnet and HTS transformer in China. In order to meet the requirements of HTS applications, tremendous research efforts have been made not only in enhancing the performance and uniformity of the Bi-2223/Ag tapes, but also in improving their application properties, which include reducing AC losses and thermal conductivity, increasing insulating properties and so on. Methods for improving productivity and yield will be also introduced.

  6. A status of the activities of the NASA/MSFC pump stage technology team

    Science.gov (United States)

    Garcia, R.; Williams, R.; Dakhoul, Y.

    1992-01-01

    The Consortium for Computational Fluid Dynamics (CFD) Application in Propulsion Technology was established to aid the transfer of CFD related advancements among academia, government agencies, and industry. The specific goals of the Consortium are to develop CFD methodologies necessary to solve propulsion problems, to validate these methodologies, and to apply these methodologies in the design process. To accomplish these goals, a team of experts in various related fields was formed, a schedule of activities necessary to meet the goals was generated, and funding for the activities was obtained from NASA. During the past year (Mar. 1991 - Mar. 1992) the team's activities have focused on preliminary code validation and on the design of an advanced impeller. Six codes were used to calculate the flow in a Rocketdyne 0.3 flow coefficient inducer, and the results were compared to L2F data available for the inducer. This activity identified shortcomings in the experimental data sets and in the analytical solutions which must be surmounted in any future team activity. The design of the advanced impeller relied heavily on CFD results to obtain an optimized geometry. The optimized geometry was analyzed using four different codes, at design and off-design conditions. Activities for the next year include the optimization of a tandem blade impeller design, benchmark of CFD codes for diffuser and volute flows, the collection of L2F data for 'state-of-the-art' impeller and inducer, and the verification of the advanced pump team impeller design in a water rig.

  7. Effectiveness of sloping agricultural land technology on soil fertility status of mid-hills in Nepal

    Institute of Scientific and Technical Information of China (English)

    Kiran Lamichhane

    2013-01-01

    Hedgerows with intercropping systems were established at the ICIMOD test and demonstration site at Godawari to assess the effective-ness of Sloping Agricultural Land Technology (SALT) in reducing run-off water volume, controlling soil loss, increasing crop production, and improving soil fertility in the mid-hills of Nepal. Runoff water volume (1996-2002), soil loss (1996-2002) and maize yield (1995-2001), and soil fertility-related parameters were assessed on SALT models with three factors:the type of nitrogen-fixing plant, the farmers’ practice, and fertilizer use. Results showed a significant effect of Alnus nepalensis and/or Indigofera dosua on runoff water volume, soil loss, crop produc-tion, soil water retention, and soil nutrients (NPK). Farmers’ practice and fertilization did not play a significant role in reducing runoff water and soil loss. However, farmers’ practice significantly increased crop produc-tion. Therefore, integrating soil conservation approaches on SALT sys-tems enhances stable economic output to hills and mountain farmers.

  8. The analysis on the current status of the overseas recycle technology of the metallic radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jae In; Kim, Hee Reyoung; Jung, Kee Jung

    2002-05-01

    It was understood that regulation criteria for material release varied with countries and that international standards were not setup. But, most advanced countries are continuously studying on the recycling of metallic wastes for the purpose of the reuse of resources and disposal cost reduction. Practically, the advanced countries make a lot of cost profits compared with disposal as their metallic wastes are recycled and reused through technology like melting. The reasonable international standards are also expected to be set in the near future because of the aggressive cooperation between international agencies such as IAEA and NEA toward recycling these wastes. In our case, the recycle criteria for radioactive waste containing radioactive nuclide with long half-life such as Cs-137(half-life: 30y) and Co-60(half-life: 5.26y) including others, which are generated from the nuclear fission or dismantling of nuclear facilities, are not yet established. Therefore, it is required that the recommendation and legalization of the regulatory criteria be carried out for the recycle and reuse of metallic wastes to be generated from the dismantling of domestic nuclear facilities in the future.

  9. Near infrared optical technologies to illuminate the status of the neonatal brain.

    Science.gov (United States)

    Liao, Steve M; Culver, Joseph P

    2014-01-01

    The neurodevelopmental outcome of at-risk infants in the neonatal intensive care unit (NICU) is concerning despite steady improvement in the survival rate of these infants. Our current management is often complicated by delayed realization of cerebral deficits due to late manifestation and lack of effective screening tools and neuroimaging/monitoring techniques that are suitable for sick neonates at the bedside. Near infrared specstrocopy (NIRS) is a noninvasive, safe, and portable technique providing a wide range of cerebral hemodynamic contrasts for evaluating the brain. The current state of NIRS technology can be devided into three generations. The first generation represents conventional trend monitoring oximeters that are currently the most widely used in the clinical settings, while the second generation focuses on improving the quantitive accuracy of NIRS measurements by advanced optical techniques. The emergence of diffuse optical imaging (DOI) represents a third generation which opens up more potential clinical applications by providing regional comparisons of brain oximetry and functions either at rest or in response to interventions. Successful integration of NIRS/DOI into the clinical setting requires matching the different capabilities of each instrument to specific clinical goals.

  10. The Comfort Houses

    DEFF Research Database (Denmark)

    Larsen, Tine Steen; Jensen, Rasmus Lund; Daniels, Ole

    This report describes the results of the Comfort Houses measuring programme conducted by Aalborg University in the period 2008 to 2011. The results from the houses included in the project are examined in detail in 8 house-specific reports. All house-specific reports referred to in this report can...

  11. Environmental Ethics and Sustainability in Housing Design

    Directory of Open Access Journals (Sweden)

    Indrė Gražulevičiūtė-Vileniškė

    2013-01-01

    Full Text Available House was probably the first freestanding building of the prehistoric humans. This field of architectural design and construction remains of crucial importance from the social, cultural, economic, and environmental points of view until today. Take, for example, the influence of housing construction sector on the environment due to the development of industrial construction technologies, and the increasing world’s population, or the emotional, psychological impact of the closest everyday built environment on the human development. Considering this, we have decided to analyze the links between types, forms, and features of housing and ethical approaches towards the environment. This research has a historical dimension: we have analyzed the importance of different land management (landscape architecture criteria in housing development in different historical periods and tried to identify the genesis of and conditions for the environmental concern in this field. The analysis of challenges of the present situation in the housing sector development has allowed us to identify main conditions of uncertainty, constant change, and diversity of possible architectural, technological, and ethical approaches that shape this field today. We propose that housing solutions may vary from low-tech buildings made with vernacular technologies and local building materials to ecological high-tech buildings still maintaining the environmentally friendly approach; however, taking into account the constant housing shortages and the increasing world’s population, the sector of affordable sustainable housing should be given a priority.DOI: http://dx.doi.org/10.5755/j01.erem.62.4.2358

  12. 生物质颗粒燃料燃烧技术发展现状及趋势%Development status and trends of biomass pellet combustion technology

    Institute of Scientific and Technical Information of China (English)

    徐飞; 侯书林; 赵立欣; 田宜水; 孟海波

    2011-01-01

    生物质颗粒燃料燃烧器具有热效率高,污染物排放量低,控制性好等优点,可以用于家庭取暖、热水、工业干燥等领域.目前国外生物质颗粒燃料燃烧器已发展成熟,但我国在这方面还有一定差距.通过分析典型生物质颗粒燃烧器的构造,以及点火方式和控制系统,指出国内目前存在燃烧器自动化程度低,核心技术缺乏,原料适应性差,相关技术标准缺乏等问题,最后提出加快点火和自控系统研发,制定行业标准等建议.%This paper takes its research interest in providing an overview of the status quo of the biomass pellet combustion technology and its future prospects. As is known, biomass pellet fuel is a kind of high-quality renewable energy resource that can be adopted to replace some primary energy resources like coal. Due to its high thermal efficiency, low emission and convenient controllability, it can be used for house warm-keeping, water-heating, industrial products-drying and so on, which accounts for its fast development both at home and abroad, particularly in recent years. Nevertheless, large gaps still exist between us and the industrially-developed countries, particularly between us and the European countries. As the structure of this kind of fuel is concerned, it is composed of 6 components: its first component is the feeding system, which is used to transport the pellet from silo to the pellet burner; the second component is ignition system,which functions as an igniter of the fuel; the third one is air distribution system, which provides the gas for combustion; the fourth is combustion tube, in which the combustion takes place; the fifth is clean-up system for driving the slag during combustion, while the last component works as a controller, which is the heart of the pellet burner. Thus, analyzing the structure, ignition and controlling system of a typical pellet burner, it can be found that there still exist some problems in the pellet

  13. Hanford Permanent Isolation Barrier Program: Asphalt technology data and status report - FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    Freeman, H.D.; Romine, R.A.; Zacher, A.H.

    1994-09-01

    The asphalt layer within the Hanford Permanent Isolation Barrier (HPIB) is an important component of the overall design. This layer provides a RCRA equivalent backup to the overlying earthen layers in the unlikely event that these layers are not able to reduce the infiltration rate to less than 0.05 cm/yr. There is only limited amount of information on using asphalt for a moisture infiltration barrier over the long times required by the HPIB. Therefore, a number of activities are under way, as part of the Barrier Development Program, to obtain data on the performance of asphalt as a moisture barrier in a buried environment over a 1000-year period. These activities include (1) determining RCRA equivalency, (2) measurement of physical properties, (3) measurement of aging characteristics, and (4) relationship to ancient asphalt analogs. During FY 1994 progress was made on all of these activities. Studies were conducted both in the laboratory and on the prototype barrier constructed over the 216-B-57 crib in the 200 East Area on the Hanford Site. This report presents results obtained from the asphalt technology tasks during FY 1994. Also included are updates to planned activities for asphalt analogs and monitoring the asphalt test pad near the prototype barrier. Measurements of hydraulic conductivity on the HMAC portion of the prototype barrier show that the asphalt layers easily meet the RCRA standard of 1 {times} 10{sup -7} cm/s. In-place measurements using a new field falling head technique show an average of 3.66 {times} 10{sup -8} cm/s, while cores taken from the north end of the prototype and measured in a laboratory setup averaged 1.29 {times} 10{sup -9} cm/s. Measurements made on the fluid applied asphalt membrane (polymer-modified asphalt) show an extremely low permeability of less than 1 {times} 10{sup -11} cm/s.

  14. Analysis of the oxido-redox status of plasma proteins. Technology advances for clinical applications.

    Science.gov (United States)

    Bruschi, Maurizio; Candiano, Giovanni; Della Ciana, Leopoldo; Petretto, Andrea; Santucci, Laura; Prunotto, Marco; Camilla, Roberta; Coppo, Rosanna; Ghiggeri, Gian Marco

    2011-05-15

    Reactive oxygen species (ROS) are potentially implicated in renal pathology. Direct evidence is available for animal models of glomerulonephritis but the demonstration of ROS implication in human diseases is only circumstantial and requires further experimental support. One problem limiting any evolution is the brief life of ROS (in terms of milliseconds) that makes it difficult their direct detection 'in vivo'. An alternative is to look at the products of oxidation of proteins that remain in blood as a signature of ROS activity. Recent data have shown the presence of oxidation products of albumin (sulfonic (34)Cys albumin) in serum of patients with focal-glomerulosclerosis, that is a primary glomerular diseases causing nephrotic syndrome. Structural studies based on spectroscopy and calorimetry strengthened the relevance of oxidation of the unique free SH groups of (34)Cys for conformation of albumin, in analogy with what already reported for other proteins. In this review, we present new developments on technologies for the detection of the oxido-redox potential of proteins that are based on the concept that oxidation is inversely correlated with their free content of sulphydryl groups. We describe, in particular, two new iodoacetamide-substituted cyanines that have been developed for labelling sulphydryl groups and can be utilized as stable dyes prior mono- and bi-dimensional electrophoresis. Proteins with low binding with iodoacetamide-cyanines may be considered as surrogate biomarkers of ROS activity. Standardization of these techniques and their acquisition in more laboratories would enable clinicians to plan screening studies on ROS in human diseases.

  15. Toward production from gas hydrates: Current status, assessment of resources, and simulation-based evaluation of technology and potential

    Science.gov (United States)

    Moridis, G.J.; Collett, T.S.; Boswell, R.; Kurihara, M.; Reagan, M.T.; Koh, C.; Sloan, E.D.

    2009-01-01

    Gas hydrates (GHs) are a vast energy resource with global distribution in the permafrost and in the oceans. Even if conservative estimates are considered and only a small fraction is recoverable, the sheer size of the resource is so large that it demands evaluation as a potential energy source. In this review paper, we discuss the distribution of natural GH accumulations, the status of the primary international research and development (R&D) programs, and the remaining science and technological challenges facing the commercialization of production. After a brief examination of GH accumulations that are well characterized and appear to be models for future development and gas production, we analyze the role of numerical simulation in the assessment of the hydrate-production potential, identify the data needs for reliable predictions, evaluate the status of knowledge with regard to these needs, discuss knowledge gaps and their impact, and reach the conclusion that the numerical-simulation capabilities are quite advanced and that the related gaps either are not significant or are being addressed. We review the current body of literature relevant to potential productivity from different types of GH deposits and determine that there are consistent indications of a large production potential at high rates across long periods from a wide variety of hydrate deposits. Finally, we identify (a) features, conditions, geology and techniques that are desirable in potential production targets; (b) methods to maximize production; and (c) some of the conditions and characteristics that render certain GH deposits undesirable for production. Copyright ?? 2009 Society of Petroleum Engineers.

  16. Differences in Student Information and Communication Technology Literacy Based on Socio-Economic Status, Ethnicity, and Gender: Evidence of a Digital Divide in Florida Schools

    Science.gov (United States)

    Ritzhaupt, Albert D.; Liu, Feng; Dawson, Kara; Barron, Ann E.

    2013-01-01

    This research examines student information and communication technology (ICT) literacy and its relationships to a student's socio-economic status (SES), gender, and ethnicity of middle school students. We recruited 5,990 students from 13 school districts across the state of Florida. Student participants completed the Student Tool for Technology…

  17. 加氢处理技术的现状与发展趋势%Status Quo and Development Trends of Hydrotreating Technology

    Institute of Scientific and Technical Information of China (English)

    刘立军; 卜岩; 侯娜; 马艳秋

    2011-01-01

    Hydrotreating is one of important processing technologies in modern refining industry. In this paper, driving forces of hydrotreating technologies development were discussed, status quo and development trend of hydrotreating technologies were summarized from the aspect of hydrotreating catalyst and process.%加氢处理是现代石油炼制工业的重要加工过程之一.讨论了加氢处理技术发展的推动因素,并从工艺和催化剂两方面对加氧处理技术的现状和发展趋势做了简要评述.

  18. Optimization and Simulation of CNC Flywheel Housing Machining Technology%飞轮壳数控加工工艺优化及仿真

    Institute of Scientific and Technical Information of China (English)

    韩旭; 兰海; 王春; 孙治成

    2016-01-01

    In order to cut down the machining cycle time of a flywheel housing production line,the unreasona-ble machining process of the flywheel housing was pointed out,and optimization scheme was put forward through the analysis on the key machining process. In order to verify the optimization results,simulations of the original machining process and the improved process were conducted by using software VERICUT. To en-sure the accuracy of the simulation,setup and configuration on VERICUT was accordance with the actual ma-chine tool and cutters parameters. The simulation result shows that the optimization scheme is correct and rea-sonable and capable of shorten the machining cycle time of the flywheel housing.%为了缩短某飞轮壳生产线时间节拍,对其瓶颈工序数控加工工艺进行分析,确定了其工艺不合理之处,提出了加工工艺优化方案.为了验证优化方案的合理性,运用了VERICUT数控加工软件对原加工工艺和改进工艺进行仿真模拟,并按照实际机床和刀具参数对VERICUT进行相应设置,保证了仿真的准确性.仿真结果证明优化方案正确可行,能够大幅缩短加工生产节拍.

  19. Torrance County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  20. New Mexico Counties, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  1. Lea County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  2. Valencia County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  3. Grant County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  4. Colfax County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  5. Hidalgo County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  6. Quay County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  7. Lincoln County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  8. Bernalillo County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  9. Union County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  10. Mora County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  11. Roosevelt County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  12. Colfax County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  13. Socorro County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  14. Curry County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  15. Harding County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  16. Taos County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  17. Quay County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  18. Eddy County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  19. Guadalupe County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  20. Harding County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  1. Roosevelt County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  2. Lea County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  3. Chaves County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  4. Luna County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  5. Taos County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  6. Curry County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  7. Socorro County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  8. Sierra County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  9. Valencia County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  10. Torrance County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  11. Sandoval County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  12. New Mexico Counties, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  13. Otero County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  14. Guadalupe County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  15. Sandoval County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  16. Hidalgo County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  17. Bernalillo County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  18. Chaves County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  19. Sierra County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  20. Grant County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  1. Cibola County Blocks, Housing Occupancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  2. Catron County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  3. Union County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  4. Otero County Blocks, Housing Vacancy Status (2010)

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The once-a-decade decennial census was conducted in April 2010 by the U.S. Census Bureau. This count of every resident in the United States was mandated by Article...

  5. Bienestar Animal: Comportamiento productivo y salud de las crías de cerdos alojadas en tecnología Flat Deck - Animal Well-being: Productive behaviour and health of the breeding of pigs housed in technology Flat Deck

    Directory of Open Access Journals (Sweden)

    Maikel Díaz Gutierrez

    2010-08-01

    Full Text Available ResumenCon el objetivo de evaluar comportamiento productivo y de salud de las crías de cerdos alojados en tecnología Flat Deck se realiza el trabajo Bienestar Animal: Comportamiento productivo y de salud de las crías de cerdos alojadas en tecnología Flat Deck. Para ello se utilizaron 24 bóxer de maternidad de tecnología Flat Deck, de estos 12 de origen chino y 12 de origen español con características similares. Se analizaron un total de 1433 crías mestizas (cruce de hembras Yorkland entre la tercera y cuarta paridad con machos CC-21, L-35 y Duroc. De estas, 715 corresponden a la tecnología de origen chino y 718 a la tecnología de origen español, alojadas aproximadamente a 10 crías por bóxer. Se tuvo en cuenta el tamaño de la camada al nacer (TCN y peso al nacer (PN, peso al destete(PD y ganancia media diaria (GMD; además de los indicadores de salud(enfermos y muertes por tecnología. En los indicadores evaluadosinicialmente que no son influenciados por las tecnologías no sepresentaron diferencias estadísticamente significativas (p>0,05. En los indicadores productivos por tecnología no se encontraron diferencia estadísticamente significativa, encontrándose las medias del peso al destete entre 7.08 y 7.15 y una ganancia media diaria de 219.11 y 221.09 respectivamente. No siendo así para los indicadores de salud, quien fue desfavorable para la tecnología de origen chino donde se presentaron 27 animales enfermos por encima de los enfermos en la tecnología de origen español.SummaryWith the objective of evaluating productive behaviour and of health of the breeding of pigs housed in technology Flat Deck he/she is carried out the work Animal Well-being: Productive behaviour and of health of the breeding of pigs housed in technology Flat Deck. For they were used it 24 boxers of technology maternity Flat Deck, of these 12 of Chinese origin and 12 of Spanish origin with characteristic similar. They were analyzed a total of 1433

  6. 24 CFR 982.618 - Shared housing: Housing quality standards.

    Science.gov (United States)

    2010-04-01

    ... Types Shared Housing § 982.618 Shared housing: Housing quality standards. (a) Compliance with HQS. The... the unit available for use by the assisted family under its lease, meets the housing quality standards... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Shared housing: Housing...

  7. Analysis and results to the status of BIM technology application in China%分析和总结BIM技术应用在中国的地位

    Institute of Scientific and Technical Information of China (English)

    Yong-Ge Xu; Dong-Wang

    2014-01-01

    Information age and the rapid development of information technology has brought the infinite creativity and possibility for all works in modern society. If CAD technology is first innovation of information technology in construction industry, then the emergence of the BIM technology shall fully deserved to be treated as a second innovation in construction industry. As a new technology which have been introduced to China in recent years, BIM technology already had its major application in foreigner countries .This paper focuses on the current status of BIM technology application in our country, especially on some small and medium enterprises using the traditional BIM technology to handle the project which have complex usage,creative deign and cost limitation. Firstly,we take a deep analysis on the initial application situation. Then we go through the practical application and analyse what benefit can be given to a project from BIM technology. Finally, analyse the problems and solutions in BIM application with consideration of Chinese building engineering development. Only after a careful analysis, a deep understanding of BIM, we can fully understand this new technology and make BIM to give its value to construction project.

  8. On-line monitoring of milk electrical conductivity by fuzzy logic technology to characterise health status in dairy goats

    Directory of Open Access Journals (Sweden)

    Mauro Zaninelli

    2014-04-01

    Full Text Available Intramammary infection affects the quality and quantity of dairy goat milk. Health status (HS and milk quality can be monitored by electrical conductivity (EC. The aim of the study was to determine the detection potential of EC when measured on-line on a daily basis and compared with readings from previous milkings. Milk yields (MYs were investigated with the same approach. To evaluate these relative traits, a multivariate model based on fuzzy logic technology – which provided interesting results in cows – was used. Two foremilk samples from 8 healthy Saanen goats were measured daily over the course of six months. Bacteriological tests and somatic cells counts were used to define the HS. On-line EC measurements for each gland and MYs were also considered. Predicted deviations of EC and MY were calculated using a moving-average model and entered in the fuzzy logic model. The reported accuracy has a sensitivity of 81% and a specificity of 69%. Conclusions show that fuzzy logic is an interesting approach for dairy goats, since it offered better accuracy than other methods previously published. Nevertheless, specificity was lower than in dairy cows, probably due to the lack of a significant decrease of MY in diseased glands. Still, results show that the detection of the HS characteristics with EC is improved, when measured on-line, daily and compared with the readings from previous milkings.

  9. Living in some of the first Danish Passive Houses

    DEFF Research Database (Denmark)

    Brunsgaard, Camilla

    2012-01-01

    The pilot project, named Comfort Houses, aims to show the industry that it is possible to construct traditional Danish houses as passive houses and promote them as comfortable houses. For this to be a success in the future, it is necessary to fulfil the occupants’ wants and needs. This study aims...... to communicate how the occupants of the Comfort Houses experience living in a passive house and illustrate how their behaviour affect the performance of the house. This is done through qualitative interviews with the occupants compared with quantitative measurements of the performance of the Comfort Houses....... A total of 3 residential units have been examined and the results show that the occupants’ everyday lives have changed – some as a result of the architectural and structural solutions, others as a result of the technology integrated in the houses. The study determines the importance of considering...

  10. Housing Stakeholder Preferences for the "Soft" Features of Sustainable and Healthy Housing Design in the UK.

    Science.gov (United States)

    Prochorskaite, Agne; Couch, Chris; Malys, Naglis; Maliene, Vida

    2016-01-07

    It is widely recognised that the quantity and sustainability of new homes in the UK need to increase. However, it is important that sustainable housing is regarded holistically, and not merely in environmental terms, and incorporates elements that enhance the quality of life, health and well-being of its users. This paper focuses on the "soft" features of sustainable housing, that is, the non-technological components of sustainable housing and neighbourhood design that can impact occupants' health and well-being. Aims of the study are to ascertain the relative level of importance that key housing stakeholders attach to these features and to investigate whether the opinions of housing users and housing providers are aligned with regards to their importance. An online survey was carried out to gauge the level of importance that the key stakeholders, such as housing users, local authorities, housing associations, and developers (n = 235), attach to these features. Results revealed that while suitable indoor space was the feature regarded as most important by all stakeholders, there were also a number of disparities in opinion between housing users and housing providers (and among the different types of providers). This implies a scope for initiatives to achieve a better alignment between housing users and providers.

  11. Problems of Reliability of Semiconductor Integrated Circuits in Plastic Housings,

    Science.gov (United States)

    1980-10-24

    of PNP transistors in plastic housings (expressed in % per 1000 h) with the 90% confidence level as a function of the sum of temperature T (in oC) and...semiconductor integrated circuits are basically modified versions of transistor housings. The characteristic feature of that type of a housing is...utilization of well-mastered technological processes introduced directly from the transistor production. Those housings have been thoroughly studied and

  12. Science, Technology, and Diplomacy in the Age of Interdependence: Committee on International Relations, U.S. House of Representatives. [Committee Print].

    Science.gov (United States)

    Congress of the U.S., Washington, DC. House Committee on International Relations.

    Provided is a congressional study which analyzes the interactions between contemporary practice of science, technology, and the formulation and conduct of U.S. foreign policy. Six cases illustrating the interaction of science, technology, and diplomacy are reviewed and six general issues, including topics such as nuclear power, seabed resources,…

  13. Housing Data Base for Sustainable Housing Provision

    African Journals Online (AJOL)

    Sultan

    percentage of the people living in these estates are tenants and cannot afford to pay for the ... developments, prospective house occupiers should be determined first in order to obtain relevant ... researchers putting the figure for housing ... materials to type of building design (Adedeji & ... schemes have become profit driven.

  14. House Price, House Quality and Economic Growth

    NARCIS (Netherlands)

    De Vries, P.; Boelhouwer, P.J.

    2010-01-01

    The literature on housing markets suggest that periods of economic growth are characterised by a demand for better housing quality and increasing prices. The basic principles of the theory are that the short-run price fluctuations occur due to market imperfection, while over the long term, causality

  15. Environmental Interactions Technology Status

    Science.gov (United States)

    1986-10-01

    This means that the cCi lI1a 2 ctl ahe Lised as I radiator , even wheni it fa Ics thle sun. U nforti.unately, the oxide’s ah,)ipmce Of solair energy...GROUP SUB-GROUP .- pacecratt L:nvironmenta Interctions,, ,paeecran nrk,-[,"dgto Analysis,’ Meteoroid/E s Impacts, -Solar Radiation ; Single Event Upsets...assessed, and rated for research maturity and system impact. The seven environment categories are: Plasma, High-Energy Radiation , Neutral Particles

  16. Gasification - Status and technology

    Energy Technology Data Exchange (ETDEWEB)

    Held, Joergen

    2012-06-15

    In this report gasification and gas cleaning techniques for biomass are treated. The main reason for gasifying biomass is to refine the fuel to make it suitable for efficient CHP production, as vehicle fuel or in industrial processes. The focus is on production of synthesis gas that can be used for production of vehicle fuel and for CHP production. Depending on application different types of gasifiers, gasification techniques and process parameters are of interest. Two gasification techniques have been identified as suitable for syngas generation, mainly due to the fact that they allow the production of a nitrogen free gas out of the gasifier; Indirect gasification and pressurized oxygen-blown gasification For CHP production there are no restrictions on the gas composition in terms of nitrogen and here air-blown gasification is of interest as well. The main challenge when it comes to gas cleaning is related to sulphur and tars. There are different concepts and alternatives to handle sulphur and tars. Some of them are based on conventional techniques with well-proven components that are commercially available while others, more advantageous solutions, still need further development.

  17. Housing of Hobson's Choice

    DEFF Research Database (Denmark)

    Vestergaard, Hedvig

    2010-01-01

    This paper looks at policies implemented to improve troubled housing estates during more than two decades. Based on evaluations of implemented programmes and case studies the paper provides a basis for discussing a number of questions: • Why do we have troubled housing estates? • What...... is the definition of troubled housing estates? • Who lives on troubled housing estates? • Who owns and manages the troubled housing estates? • What have been the reasons behind improvement programmes for troubled housing estates? • What kind of improvement programmes have been implemented and with what kind...... of results? • Have improvement programmes changed the position of the estates on the local housing markets? • What are the changes in policies and results? • What are the perspectives for policy initiatives in the field of troubled housing estates?...

  18. How to Teach Housing

    Science.gov (United States)

    Wysocki, Joseph L.

    1977-01-01

    A list of topics and related field experiences accompany this description of an introductory undergraduate course on housing and society. Topics and community experiences are also outlined for a graduate course in advanced housing and interior design. (TA)

  19. Housing Inventory Count

    Data.gov (United States)

    Department of Housing and Urban Development — This report displays the data communities reported to HUD about the nature of their dedicated homeless inventory, referred to as their Housing Inventory Count (HIC)....

  20. Housing Options for Older Adults: A Guide for Making Housing Decisions

    Science.gov (United States)

    ... a shared bathroom, may resemble a dormitory or hotel. There are usually common areas for socializing with ... on benefits, civil rights, community life, housing, health, technology and transportation. 800.FED.INFO (800.333.4636) ...

  1. Dutch house price fundamentals

    NARCIS (Netherlands)

    Haffner, M.E.A.; de Vries, P.

    2009-01-01

    This paper discusses house price developments in the Netherlands, specifically focussing on the question whether current house prices in the Dutch owner-occupied market are likely to decrease. We analyse three aspects of the question based on a literature review: (1) whether there is a house price b

  2. Dutch house price fundamentals

    NARCIS (Netherlands)

    Haffner, M.E.A.; de Vries, P.

    2009-01-01

    This paper discusses house price developments in the Netherlands, specifically focussing on the question whether current house prices in the Dutch owner-occupied market are likely to decrease. We analyse three aspects of the question based on a literature review: (1) whether there is a house price

  3. Situation-Based Housing

    DEFF Research Database (Denmark)

    Duelund Mortensen, Peder

    2011-01-01

    Presentation of urban housing research on flexible housing types in the Copenhagen Region: Theoretical background, methodology, analyse of spatial organization, interviews and results. Cases: Pærehaven in Ølby, Køge and M-house in Ørestad, Copenhagen...

  4. Analysis on the Current Status of Chemical Decontamination Technology of Steam Generators in the Oversea Nuclear Power Plants (NPPs)

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Taebin; Kim, Sukhoon; Kim, Juyoul; Kim, Juyub; Lee, Seunghee [FNC Technology Co. Ltd., Yongin (Korea, Republic of)

    2015-10-15

    The steam generators in Hanbit Unit 3 and 4 are scheduled to be replaced in 2018 and 2019, respectively. Nevertheless, the wastes from the dismantled steam generators are currently just on-site stored in the NPP because there are no disposal measures for the waste and lack of the decontamination techniques for large-sized metallic equipment. In contrast, in the oversea NPPs, there are many practical cases of chemical decontamination not only for oversized components in the NPPs such as reactor pressure vessel and steam generator, but also for major pipes. Chemical decontamination technique is more effective in decontaminating the components with complicated shape compared with mechanical one. Moreover, a high decontamination factor can be obtained by using strong solvent, and thereby most of radionuclides can be removed. Due to these advantages, the chemical decontamination has been used most frequently for operation of decontaminating the large-sized equipment. In this study, an analysis on the current status of chemical decontamination technique used for the steam generators of the foreign commercial NPPs was performed. In this study, the three major chemical decontamination processes were reviewed, which are applied to the decommissioning process of the steam generators in the commercial NPPs of the United States, Germany, and Belgium. The three processes have the different features in aspect of solvent, while those are based in common on the oxidation and reduction between the target metal surface and solvents. In addition, they have the same goals for improving the decontamination efficiency and decreasing the amount of the secondary waste generation. Based on the analysis results on component sub-processes and major advantages and disadvantages of each process, Table 2 shows the key fundamental technologies for decontamination of the steam generator in Korea and the major considerations in the development process of each technology. It is necessary to prepare

  5. Assisted Housing - Public Housing Authorities - National Geospatial Data Asset (NGDA)

    Data.gov (United States)

    Department of Housing and Urban Development — Public Housing was established to provide decent and safe rental housing for eligible low-income families, the elderly, and persons with disabilities. Public housing...

  6. Technology Status and Expected Greenhouse Gas Emissions of Battery, Plug-In Hybrid, and Fuel Cell Electric Vehicles

    Science.gov (United States)

    Lipman, Timothy E.

    2011-11-01

    Electric vehicles (EVs) of various types are experiencing a commercial renaissance but of uncertain ultimate success. Many new electric-drive models are being introduced by different automakers with significant technical improvements from earlier models, particularly with regard to further refinement of drivetrain systems and important improvements in battery and fuel cell systems. The various types of hybrid and all-electric vehicles can offer significant greenhouse gas (GHG) reductions when compared to conventional vehicles on a full fuel-cycle basis. In fact, most EVs used under most condition are expected to significantly reduce lifecycle GHG emissions. This paper reviews the current technology status of EVs and compares various estimates of their potential to reduce GHGs on a fuel cycle basis. In general, various studies show that battery powered EVs reduce GHGs by a widely disparate amount depending on the type of powerplant used and the particular region involved, among other factors. Reductions typical of the United States would be on the order of 20-50%, depending on the relative level of coal versus natural gas and renewables in the powerplant feedstock mix. However, much deeper reductions of over 90% are possible for battery EVs running on renewable or nuclear power sources. Plug-in hybrid vehicles running on gasoline can reduce emissions by 20-60%, and fuel cell EV reduce GHGs by 30-50% when running on natural gas-derived hydrogen and up to 95% or more when the hydrogen is made (and potentially compressed) using renewable feedstocks. These are all in comparison to what is usually assumed to be a more advanced gasoline vehicle "baseline" of comparison, with some incremental improvements by 2020 or 2030. Thus, the emissions from all of these EV types are highly variable depending on the details of how the electric fuel or hydrogen is produced.

  7. Smart (Domotic houses

    Directory of Open Access Journals (Sweden)

    Luis Felipe Herrera Quintero

    2010-04-01

    Full Text Available The advance of telecomunications via the use of Internet has led to IP network integration. Many networks have been working successfully and have been fundamental for many areas in measuring the automation of data, thus allowing researchers and professionals to have a wider view of production in various sectors. Remote control has been developed throught technological innovation making an enviroment consisting of human interaction based on telecommunications and control systems ever more tangible. Technological development has led to an infinite range of everyday deveices being remotely controlled via Internet, the human voice, a cell-phone or normal phone keyboard or a PALM, pocket PC or desktop computer. Amongst the new activities which can be controlled in a person's house via a PDA (Personal Digital Assistant would be the degree of illumination; such activities are defined as being domotic. The word domotic refers to integrating several areas of knowledge such as telecommunications, electronics, informatics and electricity to improve human beings' quality of life, thus aiding Colombian society's growth.

  8. Research Status of Science and Technology Innovation in General Hospitals in China%我国综合性医院科技创新研究现状

    Institute of Scientific and Technical Information of China (English)

    严汪龙; 赵兴海; 汤敏

    2016-01-01

    科技创新是综合性医院提高核心竞争力的重要保证。本文详细阐述了综合性医院科技创新的重要性,通过文献研究,对国内医院科技创新如知识创新、技术创新、科技创新体系构建与科技创新能力评价等方面的研究现状进行归纳总结,找出目前研究的不足之处,为医院科技创新研究提供新的思路。%Science and technology innovation is an important guarantee to improve the core competitiveness of the general hospital.Chinese scholars have done a lot of research about knowledge innovation, technological innovation, construction of innovation system of science and tech-nology and evaluation of innovation ability of science and technology in hospitals, enriching the theory of science and technology innovation re-search.In this paper, the importance of Science and technology innovation of the hospital is discussed.The author summarized the domestic re-search status of science and technology innovation in hospitals by literature study, found out the deficiencies of the current research and points to be improved, to provide new ideas for the study of science and technology innovation.

  9. 寒冷地区被动式超低能耗建筑关键技术研究%Research on key technologies of passive house in cold region

    Institute of Scientific and Technical Information of China (English)

    陈强; 王崇杰; 李洁; 刘兴民

    2016-01-01

    随着绿色、循环、低碳发展理念的不断普及,被动式超低能耗建筑因其能源效率高、对环境污染少且舒适性等的特点,成为目前应对能源危机、气候变化以及人们追求高品质生活质量而选择的重要的建筑形式.而积极探索寒冷地区被动式超低能耗建筑建设关键技术方案,实现我国被动超低能耗建筑的本土化发展已迫在眉睫.文章阐述了国内外被动式超低能耗建筑发展的概况,针对寒冷地区的被动式超低能耗建筑从无热桥的高效建筑保温系统、建筑气密性设计、遮阳设计、高效新风热回收系统、辅助供暖供冷系统等关键技术进行了设计研究,提出了适宜寒冷地区被动式超低能耗建筑发展策略.%With the growing popularity of green,recycling,low carbon development concept,the passive house is able to deal with energy crisis,climate change and peopleˊs pursuit of high quality life due to its higher energy efficiency,less pollution to environment,more comfort,and becomes an important kind of construction. Exploring key technical scheme actively in the cold region passive house construction and realizing the super localization of passive house development is imminent. The paper gives a domestic and foreign passive ultra overview of the development of the construction of low energy consumption,and does research on key technologies of passive house about the thermal bridge, building insulation system,building air tight design,shading design,fresh air heat recovery system, auxiliary heating for cooling system in cold region,and puts forward the suitable passive ultra low energy consumption construction and development strategy for cold region.

  10. Inadequate housing in Ghana

    Directory of Open Access Journals (Sweden)

    Franklin Obeng-Odoom

    2011-01-01

    Full Text Available Two themes are evident in housing research in Ghana. One involves the study of how to increase the number of dwellings to correct the overall housing deficit, and the other focuses on how to improve housing for slum dwellers. Between these two extremes, there is relatively little research on why the existing buildings are poorly maintained. This paper is based on a review of existing studies on inadequate housing. It synthesises the evidence on the possible reasons for this neglect, makes a case for better maintenance and analyses possible ways of reversing the problem of inadequate housing.

  11. Dutch house price fundamentals

    OpenAIRE

    Haffner, M.E.A.; De Vries, P.

    2009-01-01

    This paper discusses house price developments in the Netherlands, specifically focussing on the question whether current house prices in the Dutch owner-occupied market are likely to decrease. We analyse three aspects of the question based on a literature review: (1) whether there is a house price bubble ready to burst; (2) whether house prices will decline in response to the credit crisis that started in 2007; and (3) whether it is likely that house prices will decrease as a result of reform...

  12. The Status Quo and the Development of Mechatronics Technology%机电一体化技术的现状与发展趋势

    Institute of Scientific and Technical Information of China (English)

    张葆青; 闫石; 陈爽

    2011-01-01

    介绍了我国机电一体化技术的发展现状和未来的发展趋势,并简单介绍了机电一体化技术主要应用的几个方面,对机电一体化的核心技术进行了简要的介绍.%The development status quo and the trend of development of meehatronics technology in our country were introduced. Some main application aspects and the core technology of mechatronics were briefly introduced.

  13. Domestic Development Status of Repair Technology of Submarine Pipelines%海底管道修复技术及我国的发展状况

    Institute of Scientific and Technical Information of China (English)

    陈晨; 陈社鹏; 谷风涛

    2015-01-01

    The classification, cause of damage and repair technology of the submarine pipelines are described. The development goals of the repair technology of the submarine pipelines are proposed according to its domestic development status.%阐述了海底管道的分类、 损坏原因及修复方法. 针对目前国内海底管道维修技术的现状, 提出了海底管道维修技术的发展目标.

  14. Moodulmaja Passion House = "Passion House" modular home

    Index Scriptorium Estoniae

    2015-01-01

    Moodulmaja Passion House. Arhitektuuri sihtkapitali innovatsioonipreemia 2013 kvaliteetse disaini ja perspektiivika arendustegevuse oskusliku sidumise eest. Arhitekt Eero Endjärv (Arhitekt11), sisearhitekt Hannelore Kääramees (Arhitekt11)

  15. Moodulmaja Passion House = "Passion House" modular home

    Index Scriptorium Estoniae

    2015-01-01

    Moodulmaja Passion House. Arhitektuuri sihtkapitali innovatsioonipreemia 2013 kvaliteetse disaini ja perspektiivika arendustegevuse oskusliku sidumise eest. Arhitekt Eero Endjärv (Arhitekt11), sisearhitekt Hannelore Kääramees (Arhitekt11)

  16. Assisted Housing - Multifamily Properties - Assisted

    Data.gov (United States)

    Department of Housing and Urban Development — HUD's Multifamily Housing property portfolio consist primarily of rental housing properties with five or more dwelling units such as apartments or town houses, but...

  17. 变频技术在制冷压缩机领域中的应用现状%Application Status of Inverter Technology Applied in Refrigeration Compressor

    Institute of Scientific and Technical Information of China (English)

    吕肖; 邹伟; 徐立军

    2015-01-01

    The basic principle and classification of inverter technology are introduced , especially its application and development status in refrigeration compressors , and prospects for its development .%本文概述了变频技术的基本原理和分类,重点介绍其在制冷压缩机中的应用和发展现状,并对其前景进行了展望。

  18. 氯化聚氯乙烯的生产现状及技术发展方虚%Production status and technology development direction of CPVC

    Institute of Scientific and Technical Information of China (English)

    骆雁

    2011-01-01

    介绍了氯化聚氯乙烯生产技术的国内外现状及差距。分析了氯化聚氯乙烯下游产品的应用前景并提出了发展建议。%The production status and technology gap of CPVC were introduced.The application prospect of downstream product of CPVC were analysed, and development suggestions were put forward.

  19. Environmental Ethics and Sustainability in Housing Design

    OpenAIRE

    Indrė Gražulevičiūtė-Vileniškė; Artūras Narvydas

    2013-01-01

    House was probably the first freestanding building of the prehistoric humans. This field of architectural design and construction remains of crucial importance from the social, cultural, economic, and environmental points of view until today. Take, for example, the influence of housing construction sector on the environment due to the development of industrial construction technologies, and the increasing world’s population, or the emotional, psychological impact of the closest everyday built...

  20. Terminology for houses and house remains

    OpenAIRE

    Rosberg, Karin

    2013-01-01

    In order to obtain lucidity, it is essential to choose adequate terminology when speaking of prehistoric houses. The understanding of house construction requires a terminology with a focus on construction. Very often, archaeologists instead use a terminology with a focus on the remains, and use an inadequate terminology for constructions, indicating that they do not fully consider how the constructions work. The article presents some suggestions for adequate construction terminology.

  1. Housing trends and impact on wood manufacturing

    Science.gov (United States)

    Matt Bumgardner; Urs Buehlmann; Al Schuler; Karen. Koenig

    2013-01-01

    Demand from housing and other construction-related sectors continues to be an important issue for the secondary wood products industry. Conducted in early 2013, this fourth annual survey provides updated information on the status and actions of U.S. manufacturers affected by these industries. The study is a joint effort by Virginia Tech, the USDA Forest Service, and...

  2. Unofficial policy: access to housing, housing information and social services among homeless drug users in Hartford, Connecticut

    Directory of Open Access Journals (Sweden)

    Corbett A Michelle

    2007-03-01

    Full Text Available Abstract Background Much research has shown that the homeless have higher rates of substance abuse problems than housed populations and that substance abuse increases individuals' vulnerability to homelessness. However, the effects of housing policies on drug users' access to housing have been understudied to date. This paper will look at the "unofficial" housing policies that affect drug users' access to housing. Methods Qualitative interviews were conducted with 65 active users of heroin and cocaine at baseline, 3 and 6 months. Participants were purposively sampled to reflect a variety of housing statuses including homeless on the streets, in shelters, "doubled-up" with family or friends, or permanently housed in subsidized, unsubsidized or supportive housing. Key informant interviews and two focus group interviews were conducted with 15 housing caseworkers. Data were analyzed to explore the processes by which drug users receive information about different housing subsidies and welfare benefits, and their experiences in applying for these. Results A number of unofficial policy mechanisms limit drug users' access to housing, information and services, including limited outreach to non-shelter using homeless regarding housing programs, service provider priorities, and service provider discretion in processing applications and providing services. Conclusion Unofficial policy, i.e. the mechanisms used by caseworkers to ration scarce housing resources, is as important as official housing policies in limiting drug users' access to housing. Drug users' descriptions of their experiences working with caseworkers to obtain permanent, affordable housing, provide insights as to how access to supportive and subsidized housing can be improved for this population.

  3. 舰艇惯性导航技术现状及发展趋势%Status Quo and Trends of Marine Inertial Navigation Technology

    Institute of Scientific and Technical Information of China (English)

    刘飞; 马林

    2011-01-01

    讲述了国内外海军舰艇用惯性导航技术的现状,分析并预测了发展趋势.简述了“舰艇用惯性导航技术”的技术特点和使用需求特点,从惯性敏感器技术和系统技术两个方面对“惯性导航系统”产品进行了分类.通过阐述技术特点与不同使用需求之间的对应关系,探寻技术发展方向;并以国内外舰艇惯性导航技术发展的历程进行佐证.%The status of domestic and overseas marine inertial navigation technology is introduced and the development trends of the technology are analyzed and forecasted, the characteristics and requirements in the use of marine inertial navigation technology are described. The productions of inertial navigation system are classified from inertial sensors technology and inertial navigation system technology. The correct development direction is selected by means of exactly grasping the characteristic of technology and the corresponding connection of the different requirements. The directions of development are clarified by retrospect of the development course of marine inertial navigation technology.

  4. Status of environmental technology; Interim Report to the sector study 'Petroleum and Energy', the integrated management plan for North Sea. Mapping of available environmental technology; Statusrapport for miljoeteknologi

    Energy Technology Data Exchange (ETDEWEB)

    2011-03-15

    The purpose of this report is to provide an overview of the current status of environmental technology that may help to prevent and reduce / prevent environmental pollution. The report is a foundation report to the management plan for the North Sea. The report was prepared based on the NPD's knowledge and with good input from the PSA, and resource persons in the oil companies. The following is given a summary of the various disciplines and the technological challenges the industry has managed to meet and which ones remain. (Author)

  5. Design of intelligent house system based on Yeelink

    Directory of Open Access Journals (Sweden)

    Lin Zhi-Huang

    2016-01-01

    Full Text Available In order to monitor the security situation of house in real time, an intelligent house remote monitoring system is designed based on Yeelink cloud services and ZigBee wireless communication technology. This system includes three parts, ZigBee wireless sensor networks, intelligent house gateway and Yeelink Cloud Services. Users can access Yeelink website or APP to get real time information in the house, receiving information including gas concentration, temperature. Also, remote commands can be sent from mobile devices to control the household appliances. The user who can monitor and control the house effectively through a simple and convenient user interface, will feel much more safe and comfortable.

  6. The Two Dimensions of Housing Inequality in EuropeAre High Home Ownership Rates an Indicator of Low Housing Values?

    Directory of Open Access Journals (Sweden)

    Kathrin Kolb

    2013-12-01

    Full Text Available Exploring inequalities in home ownership as an important component of household wealth contributes to the understanding of social stratification in modern societies. We argue that inequalities in housing are not only manifested by differential access to home ownership, but also by differences in housing values, a somewhat neglected aspect in research hitherto. Applying data from the “Survey of Health, Ageing and Retirement in Europe” (SHARE, we compare home ownership rates and housing values between 13 European countries. Our results suggest that housing inequality is indeed a two-dimensional phenomenon. Most surprisingly, migration status has a negative impact on the probability of home ownership in European countries, but not on the mean housing value. In addition, we exploratively study the relationship between these two dimensions of housing inequality. Our analyses show a negative though not significant relationship between home ownership rates and housing values.

  7. 75 FR 4100 - Affirmative Fair Housing, Marketing (AFHM) Plan-Multifamily Housing, Affirmative Fair Housing...

    Science.gov (United States)

    2010-01-26

    ... URBAN DEVELOPMENT Affirmative Fair Housing, Marketing (AFHM) Plan-Multifamily Housing, Affirmative Fair Housing Marketing (AFHM) Plan-Single Family Housing and Affirmative Fair Housing Marketing (AFHM) Plan... lists the following information: Title of Proposal: Affirmative Fair Housing, Marketing (AFHM) Plan...

  8. 我国纺织环保上浆现状及发展趋势%Current Status and Developing Trend of Environmental-friendly Sizing Technologies in China

    Institute of Scientific and Technical Information of China (English)

    王耀

    2014-01-01

    The development of textile sizing technologies should meet the requirements of low-carbon, eco-friendly, recycling economy and the developing trend of textile industry. This paper describes the current status, characteristics and existing problems of environmental-friendly sizing technologies in China and puts forward some ideas for promoting the development of environmental-friendly sizing technologies in China.%纺织上浆工艺的发展要符合低碳、绿色的循环经济发展要求及纺织工业发展趋势。文章主要介绍了目前我国纺织环保上浆的现状、特点及存在的问题,为加快推进我国纺织环保上浆工艺的发展提出了思路。

  9. Analyzing the urban development of Isfahan districts in the housing sector using analytic network process (ANP

    Directory of Open Access Journals (Sweden)

    S. Hadizadeh Zargar

    2013-01-01

    highest score (0.574 and Districts 6 and 5 rank second and third respectively among the urban districts of Isfahan. On the other hand, District 14 in the far north of Isfahan gained the lowest score (-0.719, ranking as the most deprived district of Isfahan. 5- RecommendationsIn order to assess the urban development of Isfahan districts in the housing sector, after the compilation, analysis and assessment of the most important indicators and considering the nature of the housing development the assessment of which requires a variety of quantitative and qualitative indicators, and given the various roles and functions of these parameters in this study, a combination of ANP and Delphi methods were used as a technique for comparing these indicators. Then, drawing on the ideas of experts and professionals, the indicators were weighed. After determining the final value of each index using analytical network model, the assessment matrix was created to determine the extent of development of each district in terms of housing. The district with lower development scores fell into the lowest ranks, namely the deprived and highly deprived groups (Districts 7 and 14. These areas need to take priority in poverty alleviation plans and the construction funds in coordinated policies should be allocated in fitting with the needs and requirements of such districts. It is because they have a larger number of negative indicators that need to be address properly. Detailed case studies and special plans such as organizing projects, development-oriented plans and specific economic plans aimed at alleviating poverty are among the strategies that can be proposed for these districts. The districts with higher development scores, however, need to take lower priority in terms of funds allocation, and maintaining the status quo should serve as a model for future planning. Further comprehensive studies still need to be carried out in the areas surveyed in this study with the aim of improving the

  10. Home automation: technological innovation or practical innovation for flow management in housing?; La domotique: innovation technologique ou innovation d`usage pour la gestion des flux dans le bati?

    Energy Technology Data Exchange (ETDEWEB)

    Lefebvre, H. [Agence de l`Environnement et de la Maitrise de l`Energie, (ADEME), 75 - Paris (France)

    1999-05-01

    The origins of innovation in home automation date from the period following the second round of oil prices increases through flow management in housing. The advantages offered by home automation have evolved since then to encompass today the technical systems integrating all automatic systems involved in the management of energy, security, communication and comfort into the habitat. Home automation innovation is an integral part of the development of the information and communication technology environment. Nonetheless, innovation faces many brakes upon its development, explained partly by the lack of standards, the diversity of solutions, the little used training procedures and a fatalistic attitude on the part of industrialists. In order to attempt to alleviate these restrictions, the parties involved in presenting home automation have set up innovation networks which go beyond simple industrial co-ordination. The main function of these innovation networks is to create mechanisms for irreversibility in order to make systems offered more valid in the long term. Does the large-scale distribution of home automation innovations need the stricter standardisation of some technologies as a prerequisite? (authors) 10 refs.

  11. The teaching house officer.

    OpenAIRE

    Schiffman, F. J.

    1986-01-01

    Although medical students on clinical ward rotations receive a large part of their education from house officers, very often house officers themselves have had little formal preparation as teachers. Because students and teachers work closely together under special conditions, unique educational situations are created where much more than factual information is conveyed. Although some house officers are "natural" teachers, others find such activities uncomfortable or burdensome. Most people, h...

  12. 房价高增长与企业“低技术锁定”--基于中国工业企业数据库的微观证据%High Growth of Housing Prices and “Low Technology Lock-in”of Chinese Enterprises:Micro Evidence from Chinese Industrial Enterprises Database

    Institute of Scientific and Technical Information of China (English)

    余静文; 王媛; 谭静

    2015-01-01

    企业是技术创新的主体,在中国经济经历快速增长的阶段,中国企业却陷入了“低技术锁定”状态,企业研发创新比例较低,研发创新的投入也低于最优的研发创新规模。同时,住房市场改革以来,中国房价经历了高速增长。泡沫理论表明,高房价既能产生流动性效应,缓解融资约束,促进研发投入,也能产生杠杆效应,挤出研发投资。文章利用匹配的中国工业企业数据和35个大中城市宏观数据,从高房价的视角为我国企业的“低技术锁定”现象提供了一个新的解释。研究显示,在房价增速快、房地产投资回报率高的背景下,企业将资源配置到房地产部门,从而挤出投资风险高、回报周期长的研发投资。房价增速提高1个百分点,研发投入占总资产比重下降0.051个百分点,人均研发投入下降92.03元;房价增速提高1个标准差,企业研发投入占总资产比重和人均研发投入下降幅度将分别达到31.80%和15.50%。政府必须在产业政策和鼓励企业创新等方面做出调整,优化产业环境,以有效引导实体企业投资结构的合理化。%Enterprises are the main parts of innovation.In the stage of quick economic growth,Chinese enterprises have fallen into the status of “low technology lock-in”:the ratio of industrial enterprises taking part in the innovation activity to the total industrial enterprises re-mains low and R&D input is under the optimal level.Meanwhile,China’s housing prices have experienced rapid growth since the housing reform in 1 998.Bubble theory reveals that housing price growth has two effects on corporate investment:on the one hand,liquidity effect could re-lease financial constraints,and thus promote investment;on the other hand,leverage effect could crowd out investment.This paper uses Chinese industrial enterprises data combining with macro data of 35 large and medium

  13. Hearings Before the Subcommittee on Advanced Research and Technology of the Committee on Science and Astronautics. U.S. House of Representatives, Ninety-First Congress, First Session

    Science.gov (United States)

    1969-12-11

    development group. Nor are we an inspector general who grades the work of others. I do believe. though, that one of our chief responsibilities is the...10M.’s %-d beyond. The Committee concluded that it will lie.-. iy, to upgrade the semiautomatic national airspace system (NAS) now being designed to...year life from the time we get the whole system installed. So I’think we have got a lot of homework to do in technology in order to make the system

  14. The architects house

    DEFF Research Database (Denmark)

    Welling, Helen

    2007-01-01

    The architects house is an article on Edward Heiberg's own house built in 1924. Edward Heiberg was a strong advocate of functionalism, and of the notion that hitherto individualistic and emotional architecture should be replaced by an objective function-based architecture with dwellings for every......The architects house is an article on Edward Heiberg's own house built in 1924. Edward Heiberg was a strong advocate of functionalism, and of the notion that hitherto individualistic and emotional architecture should be replaced by an objective function-based architecture with dwellings...

  15. Social Housing in Denmark

    DEFF Research Database (Denmark)

    Vestergaard, Hedvig; Scanlon, Kath J

    2014-01-01

    Social housing is a cornerstone in the Danish welfare society and is accessible for all households. By law, social housing must be rented at cost rents, which are based on historical costs; rents do not respond to market forces. Social housing aims to provide good standard, secure and affordable...... for the individual associations as well as each housing estate. In principle, each estate and the association it belongs to must balance its books. An important feature of the sector is the build-up of a funding system which makes it possible to support the financing of major renovations and energy measures as well...

  16. Effects of chronic exposure to low-level pollutants in the environment. Prepared for the Subcommittee on the Environment and the Atmosphere of the Committee on Science and Technology, US House of Representatives, Ninety-Fourth Congress, First Session by the Congressional Research Service, Library of Congress, Serial 0

    Energy Technology Data Exchange (ETDEWEB)

    1975-01-01

    This report was prepared for the Subcommittee on the Environment and the Atmosphere of the US House of Representatives Committee on Science and Technology. It describes the effects of low-level, persistent pollutants on human health, fish and wildlife, agriculture, and climate.

  17. Optimal Cost of a Solar Photovoltaic System for a Remote House in Bihar

    Directory of Open Access Journals (Sweden)

    Sujit Kumar Jha

    2015-07-01

    Full Text Available Energy plays a vital role for the growth of a country. Solar energy is the most important renewable energy resources that can play vital role in the replacement of fossil resources to generate clean energy. Due to technological developments in solar power technologies, solar energy can be used for cooling, heating, and daily electricity demand of the world and emerged as viable alternative to produce clean energy in future. The paper describes the technological development of PV model, its present status and future opportunities in the context of Bihar, India. The study was carried out in Bihar, global solar radiation data is required for the calculation and assessment of the working principles of PV system installed at remotely located house to provide adequate power backup. The case study has been based on the solar radiation data available in Bihar, India, the cost of a suitable PV model for a house has been computed based on the analysis of power requirement of a houses in a day.

  18. Short-Term and Long-Term Technology Needs/Matching Status at Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    S. L. Claggett

    1999-12-01

    This report identifies potential technology deployment opportunities for the Environmental Management (EM) programs at the Idaho National Engineering and Environmental Laboratory (INEEL). The focus is on identifying candidates for Accelerated Site Technology Deployment (ASTD) proposals within the Environmental Restoration and Waste Management areas. The 86 technology needs on the Site Technology Coordination Group list were verified in the field. Six additional needs were found, and one listed need was no longer required. Potential technology matches were identified and then investigated for applicability, maturity, cost, and performance. Where promising, information on the technologies was provided to INEEL managers for evaluation. Eleven potential ASTD projected were identified, seven for near-term application and four for application within the next five years.

  19. THE KEY TECHNOLOGY AND DEVELOPMENT STATUS OF LINEAR COMPRESSOR%制冷线性压缩机关键技术及发展现状

    Institute of Scientific and Technical Information of China (English)

    曹广亮; 陈曦

    2016-01-01

    随着技术的发展,线性压缩机技术的应用逐渐从军工、航天、生物医药领域转向民用领域,应用范围扩大,技术研发增强。为了使科研人员对线性压缩机关键技术和发展现状有所了解,介绍了线性压缩机直线电机技术、线性压缩机润滑技术、线性压缩机控制技术和线性压缩机活塞及阀门布局四大技术,详细分析比较了线性压缩机直线电机的三种结构、线性压缩机有油润滑和无油润滑的优缺点、线性压缩机各种控制技术的特点、线性压缩机活塞单双侧布局和阀门三种布局的结构方式,并对线性压缩机的性能、发展现状进行了简要论述。%With the development of technology,the application of the linear compressor technology shift from the areas of military,aerospace and biomedical to civilian areas gradually,the scope of application has expanded,the linear com-pressor technology research has increased. In order to make researchers understand the technology and development status of linear compressor,this paper describes four technologies such as the linear motor technology of linear compressor,lubri-cation technology of linear compressor,control technology of linear compressor and pistons and valves layout of linear compressor,analyzes and compares three kinds of linear motors structure of linear compressor,advantages and disadvan-tages of oil lubrication and oil-free for linear compressor,various characteristics of control technology for linear compres-sor,the single-sided layout of piston and three layout modes of valves for linear compressor in detail. At the same time, this paper describes the performance and development status of the linear compressor briefly.

  20. Vermicular cast iron production in the “Inmold” technology (in the Metalpol casting house and the assessment of its thermal fatigue resistance

    Directory of Open Access Journals (Sweden)

    J. Zych

    2011-07-01

    Full Text Available The method of obtaining the vermicular cast iron in the “Inmold” technology and the results of the thermal fatigue investigations, are presented in the paper. The influence of the maximum cycle temperature (Tmax on the thermal fatigue resistance was examined by means of the L.F. Coffin method. The cast iron structure change caused by the thermal fatigue is presented in the paper. When the vermicular cast iron is subjected to the thermal fatigue the matrix ferritisation occurs, which leads to the strength, Rm., decrease. The heating process of the vermicular cast iron is slower as compared to the spheroidal cast iron, whereas the cooling process is faster. Under the same conditions of heat exchanging the vermicular cast iron is heated to a much lower temperature than the spheroidal one. Together with the maximum heating temperature increase the thermal fatigue resistance decreases.

  1. Life cycle assessment of mobile phone housing

    Institute of Scientific and Technical Information of China (English)

    YANG Jian-xin; WANG Ru-song; FU Hao; LIU Jing-ru

    2004-01-01

    The life cycle assessment of the mobile phone housing in Motorola(China) Electronics Ltd. was carried out, in which materials flows and environmental emissions based on a basic production scheme were analyzed and assessed. In the manufacturing stage, such primary processes as polycarbonate molding and surface painting are included, whereas different surface finishing technologies like normal painting, electroplate, IMD and VDM etc. were assessed. The results showed that housing decoration plays a significant role within the housing life cycle. The most significant environmental impact from housing production is the photochemical ozone formation potential.Environmental impacts of different decoration techniques varied widely, for example, the electroplating technique is more environmentally friendly than VDM. VDM consumes much more energy and raw material. In addition, the results of two altemative scenarios of dematerialization showed that material flow analysis and assessment is very important and valuable in selecting an environmentally friendly process.

  2. Park Accessibility Impacts Housing Prices in Seoul

    Directory of Open Access Journals (Sweden)

    Jin Han Park

    2017-01-01

    Full Text Available Housing prices are determined by a variety of factors, including the features of the building and the neighborhood environment, and a potential buyer decides to buy a house after reviewing these factors and concluding that it is worth the price. We used Hedonic Price Methods to find the relationship between monetary value of house and access conditions to urban parks. Two meaningful results were discovered in this study: first, as the distance from the park increases, the value of the park inherent in the housing price decreases; second, the greater walking accessibility, to the park, the higher the park value inherent in housing prices. Despite presenting shorter distances to walk and more entrances, poorly accessible zones were deemed as such due to the necessity of crossing an arterial road. This indicates that the results can define accessibility not as the Euclidian distance but as the shortest walking distance while considering crossroads and park entrances. The results of this study have significant implications for urban park economic impact analyses in Seoul. Also, the increase in housing prices closer to parks supports the idea that access is dependent on the residents’ socioeconomic status. Lastly, the results of this study can improve walking accessibility to the park.

  3. GENDERED SPACE IN WEST SUMBA TRADITIONAL HOUSES

    Directory of Open Access Journals (Sweden)

    Esti Asih NURDIAH

    2015-12-01

    Full Text Available Rendell stated that gender representation underlined the production of space in architecture both symbolically and functionally in certain cultures (Rendell et al. 2000. Thus, an exploration on the spatial functionality of traditional houses could show how cultural gender rules and roles generate the spatial arrangements. This empirical research explored the traditional houses in two kampongs: Tarung and Ratenggaro of West Sumba, Indonesia, which spaces are divided into two distinct spaces: male’s space and female’s space, each with its own entrance. This firm division leads to the questions on its relation with the traditional gender roles are represented inside the house. Interestingly, the spatial arrangement is not intended to create separation between men and women inside the house or to pose that the status and roles of men are higher than those of women. The research found that the space separation actually is a manifestation of the dynamic roles of male and female members of the house and the circular arrangement of the space around the fireplace at the centre of the house follows the dynamic of gender duality in Sumba culture.

  4. A review of nuclear data needs and their status for fusion reactor technology with some suggestions on a strategy to satisfy the requirements

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D.L. [Argonne National Lab., IL (United States); Cheng, E.T. [TSI Research, Inc., Solana Beach, CA (United States)

    1991-09-01

    A review was performed on the needs and status of nuclear data for fusion-reactor technology. Generally, the status of nuclear data for fusion has been improved during the past two decades due to the dedicated effort of the nuclear data developers. However, there are still deficiencies in the nuclear data base, particularly in the areas of activation and neutron scattering cross sections. Activation cross sections were found to be unsatisfactory in 83 of the 153 reactions reviewed. The scattering cross sections for fluorine and boron will need to be improved at energies above 1 MeV. Suggestions concerning a strategy to address the specific fusion nuclear data needs for dosimetry and activation are also provided.

  5. House Prices and Taxes

    DEFF Research Database (Denmark)

    Gjedsted Nielsen, Mads

    This paper is the first to consider a large scale natural experiment to estimate the effect of taxes on house prices. We find that a 1 percentage-point increase in income tax rates lead to a drop in house prices of at most 2.2%. This corresponds to a tax capitalization for the average household o...

  6. Sustainable housing in Europe

    NARCIS (Netherlands)

    Van Hal, A.

    1998-01-01

    There is considerable variation in the extent to which environmental measures are adopted in housing construction in various European countries. Whereas sustainable housing is dearly part of day-to-day building practice in some countries, in others the topic seldom receives serious attention. None

  7. Ndebele Inspired Houses

    Science.gov (United States)

    Rice, Nicole

    2012-01-01

    The house paintings of the South African Ndebele people are more than just an attempt to improve the aesthetics of a community; they are a source of identity and significance for Ndebele women. In this article, the author describes an art project wherein students use the tradition of Ndebele house painting as inspiration for creating their own…

  8. Dream house in Australia

    DEFF Research Database (Denmark)

    Andersen, Michael Asgaard

    2004-01-01

    This first book in the Utzon Library, which deals with Utzon's own houses, contains a number of drawings that have not previously been published. This is especially true of the four projects for his house in Bayview, Sydney, which unfortunately never got past the drawing stage, as Utzon had left ...

  9. Sustainable housing in Europe

    NARCIS (Netherlands)

    Van Hal, A.

    1998-01-01

    There is considerable variation in the extent to which environmental measures are adopted in housing construction in various European countries. Whereas sustainable housing is dearly part of day-to-day building practice in some countries, in others the topic seldom receives serious attention. None o

  10. 污水源热泵技术研究现状及分析%Research status and analysis of sewage-source heat pump technology

    Institute of Scientific and Technical Information of China (English)

    孙春锦; 吴荣华; 孙源渊; 郑记莘

    2015-01-01

    Plugging and fouling are key challenges need to be addressed in sewage-source heat pump technology.At present,pre-filter and unblocked heat exchange technology are applied to solve plugging problem.Summarizes and analyses the research status of sewage-source heat pump technology.Compares the advantages and disadvantages between pre-filter and unblocked heat exchange technology,which provides a reference for the development and application of sewage-source heat pump technology.%堵塞和污垢是污水源热泵技术应用需要解决的关键难题。目前主要采用前置过滤技术和疏导式换热技术解决堵塞问题。总结并分析了污水源热泵技术的研究现状,比较了前置过滤技术和疏导式换热技术的优缺点,为污水源热泵技术的发展与应用提供参考。

  11. The Current Status of Electric Spark Line Cutting Technology in China%国内电火花线切割技术研发的探讨

    Institute of Scientific and Technical Information of China (English)

    胥宏; 张世凭; 连帅梅

    2013-01-01

      从快走丝电火花切割和慢走丝电火花切割两方面概述了国内电火花线切割技术的发展及应用现状。介绍了电火花线切割机床的加工原理、加工特点、加工范围及应用领域;并从主机制造技术、脉冲电源技术、控制技术以及加工工艺技术4个方面探讨双向快走丝电火花线切割技术的发展现状。%This article summarized the development and application of high speed WEDM wire cutting and Slow-feeding WEDM outlined electric spark line cutting technology in China in two aspects, described the processing principle of electric spark linear cutting machine tool, the processing characteristic and the processing range and application field;and discussed the current development status of two-way fast wire EDM wire cutting from four aspects of host machine manufacturing technology, pulsed power supply technology, control technology and processing technology .

  12. Development Status and Key technology of Service Robot for Elderly%老年服务机器人发展现状与关键技术

    Institute of Scientific and Technical Information of China (English)

    罗坚

    2016-01-01

    随着生活水平的显著提高和医疗条件的改善,老年服务机器人已成为当前服务机器人研究的一个重要方向,具有广阔的应用前景.介绍了国内外老年服务机器人的发展现状,对老年服务机器人的关键技术:自主移动技术、感知技术、智能控制技术和通信技术进行了介绍.对主要存在的问题和解决方案进行了总结.%As improvement of living standards and medical conditions,elderly service robots have become one of the most important research direction in current service robot researches, and have broad prospect in application.This paper present the developing status of service robots for elderly at home and abroad,and the several key technologies of robots for elderly are introduced, including autonomous mobile technology, sensing technology,intelligent control technology and communication technology.The main existing problems and solutions are summarized.

  13. The Nordic Housing Enabler

    DEFF Research Database (Denmark)

    Helle, Tina; Slaug, Bjørn; Brandt, Åse

    2010-01-01

    This study addresses development of a content valid cross-Nordic version of the Housing Enabler and investigation of its inter-rater reliability when used in occupational therapy rating situations, involving occupational therapists, clients and their home environments. The instrument was translated...... from the original Swedish version of the Housing Enabler, and adapted according to accessibility norms and guidelines for housing design in Sweden, Denmark, Finland and Iceland. This iterative process involved occupational therapists, architects, building engineers and professional translators......, resulting in the Nordic Housing Enabler. For reliability testing, the sampling strategy and data collection procedures used were the same in all countries. Twenty voluntary occupational therapists, pair-wise but independently from each other, collected data from 106 cases by means of the Nordic Housing...

  14. Sustainable Housing Design

    DEFF Research Database (Denmark)

    Lauring, Gert Michael

    2016-01-01

    Sustainable Housing Design. Integrating technical and housing quality aspects of sustainable architecture in civil engineering education. Summary An integrated design approach to sustainable architecture is outlined that combines concerns for zero energy building, good indoor climate and adequate...... phases. The outcome shows that integrated design further solutions where sustainable urban forms of settlement can be highly energy efficient while also attractive from a user perspective. Key words: Sustainable architecture, integrated design, zero-energy-housing, dense urban living. 1. Introduction...... constructions, private and public outdoor space, housing, urban and architectural quality. The educational framework, curriculum and inte-grated design methods are preconditions for optimizing a design process where technical criteria, functional concerns and housing quality are addressed from the initial...

  15. 75 FR 8983 - Notice of Proposed Information Collection for Public Comment: Housing Counseling Outcomes Study

    Science.gov (United States)

    2010-02-26

    ... URBAN DEVELOPMENT Notice of Proposed Information Collection for Public Comment: Housing Counseling... appropriate automated collection techniques or other forms of information technology (e.g., permitting...: Housing Counseling Outcomes Study. Description of the need for the information and proposed use:...

  16. 78 FR 24431 - Notice of Submission of Proposed Information Collection to OMB; Housing Counseling Training Program

    Science.gov (United States)

    2013-04-25

    ... URBAN DEVELOPMENT Notice of Submission of Proposed Information Collection to OMB; Housing Counseling... forms of information technology, e.g., permitting electronic submission of responses. This notice also lists the following information: Title of Proposed: Housing Counseling Training Program. OMB...

  17. Gestation group housing of sows

    NARCIS (Netherlands)

    Spoolder, H.A.M.; Vermeer, H.M.

    2015-01-01

    Group housing of gestating sows is currently replacing individual housing systems around the world. Modern group housing systems allow performance in groups to be equal to that in individual housing systems. A crucial element in the success of a housing system is the way in which it deals with

  18. Assisted Housing - Public Housing Developments - National Geospatial Data Asset (NGDA)

    Data.gov (United States)

    Department of Housing and Urban Development — The general location of an entire Public Housing Development. A distinct address is chosen to represent the general location of an entire Public Housing Development,...

  19. Housing of old age households in 10 EU countries

    DEFF Research Database (Denmark)

    Skak, Morten

    2008-01-01

    The paper is an extract of a study under the DEMHOW (Demographic Change and Housing Wealth) project financed by the under the EU Seventh Framework Programme for Research and Technological Development, which investigates the ways in which, across member states, demographic change and housing wealt...... are linked, and to use those investigations in order to contribute to policy making. The present paper uses SHARE to look at housing conditions for old age households in the 10 European countries included....

  20. Solar technology assessment project. Volume 11: The solar industry in the United States: Its status and prospects, 1981

    Science.gov (United States)

    Clark, J. A.

    1981-04-01

    The energy production goals for the solar industry, and the industry's present status are described. Manufacturing and sales of low and medium temperature solar collectors from 1974 to 2000 are analyzed, and the HUD/DOE solar demonstration programs' relative merits are discussed. Certain characteristics of the conventional water heating industry are briefly described