WorldWideScience

Sample records for horizontal control rod

  1. CONTROL ROD

    Science.gov (United States)

    Zinn, W.H.; Ross, H.V.

    1958-11-18

    A control rod is described for a nuclear reactor. In certaln reactor designs it becomes desirable to use a control rod having great width but relatively llttle thickness. This patent is addressed to such a need. The neutron absorbing material is inserted in a triangular tube, leaving volds between the circular insert and the corners of the triangular tube. The material is positioned within the tube by the use of dummy spacers to achleve the desired absorption pattern, then the ends of the tubes are sealed with suitable plugs. The tubes may be welded or soldered together to form two flat surfaces of any desired width, and covered with sheetmetal to protect the tubes from damage. This design provides a control member that will not distort under the action of outside forces or be ruptured by gases generated within the jacketed control member.

  2. Advanced gray rod control assembly

    Energy Technology Data Exchange (ETDEWEB)

    Drudy, Keith J; Carlson, William R; Conner, Michael E; Goldenfield, Mark; Hone, Michael J; Long, Jr., Carroll J; Parkinson, Jerod; Pomirleanu, Radu O

    2013-09-17

    An advanced gray rod control assembly (GRCA) for a nuclear reactor. The GRCA provides controlled insertion of gray rod assemblies into the reactor, thereby controlling the rate of power produced by the reactor and providing reactivity control at full power. Each gray rod assembly includes an elongated tubular member, a primary neutron-absorber disposed within the tubular member said neutron-absorber comprising an absorber material, preferably tungsten, having a 2200 m/s neutron absorption microscopic capture cross-section of from 10 to 30 barns. An internal support tube can be positioned between the primary absorber and the tubular member as a secondary absorber to enhance neutron absorption, absorber depletion, assembly weight, and assembly heat transfer characteristics.

  3. Control of Rod-Rod Interactions in Poly(3-alkylthiophenes)

    Science.gov (United States)

    Ho, Victor; Boudouris, Bryan W.; Segalman, Rachel A.

    2010-03-01

    Poly(3-hexylthiophene) is a commonly used semiconducting polymer because of its relatively high charge transport ability, low band gap, and solution processiblity. Strong intermolecular interactions lead to the formation of nanofibers during crystallization, which prevents long-range microstructural ordering. We show rod-rod interactions, parameterized by the Maier-Saupe parameter, can be controlled by rational polythiophene side chain design. Effects of side chain passivation are evidenced by a depressed melting temperature and the presence of a liquid crystalline region. Additionally, the Maier-Saupe parameters are estimated for poly(3-dodecylthiophene) and poly(3-ethylhexylthiophene); the relative magnitudes of each are related to the interchain spacings obtained by x-ray diffraction experiments. The systematic tuning of the rod-rod interactions in polythiophenes allows for manipulation of the ratio of Maier-Saupe to the Flory-Huggins parameter, a crucial value in obtaining long-range order in rod-coil block copolymer morphologies.

  4. Hydraulic Actuator for Ganged Control Rods

    Science.gov (United States)

    Thompson, D. C.; Robey, R. M.

    1986-01-01

    Hydraulic actuator moves several nuclear-reactor control rods in unison. Electromagnetic pump pushes liquid lithium against ends of control rods, forcing them out of or into nuclear reactor. Color arrows show lithium flow for reactor startup and operation. Flow reversed for shutdown. Conceived for use aboard spacecraft, actuator principle applied to terrestrial hydraulic machinery involving motion of ganged rods.

  5. Control rods in LMFBRs: a physics assessment

    Energy Technology Data Exchange (ETDEWEB)

    McFarlane, H.F.; Collins, P.J.

    1982-08-01

    This physics assessment is based on roughly 300 control rod worth measurements in ZPPR from 1972 to 1981. All ZPPR assemblies simulated mixed-oxide LMFBRs, representing sizes of 350, 700, and 900 MWe. Control rod worth measurements included single rods, various combinations of rods, and Ta and Eu rods. Additional measurements studied variations in B/sub 4/C enrichment, rod interaction effects, variations in rod geometry, neutron streaming in sodium-filled channels, and axial worth profiles. Analyses were done with design-equivalent methods, using ENDF/B Version IV data. Some computations for the sensitivities to approximations in the methods have been included. Comparisons of these analyses with the experiments have allowed the status of control rod physics in the US to be clearly defined.

  6. High temperature control rod assembly

    Energy Technology Data Exchange (ETDEWEB)

    Vollman, Russell E. (Solana Beach, CA)

    1991-01-01

    A high temperature nuclear control rod assembly comprises a plurality of substantially cylindrical segments flexibly joined together in succession by ball joints. The segments are made of a high temperature graphite or carbon-carbon composite. The segment includes a hollow cylindrical sleeve which has an opening for receiving neutron-absorbing material in the form of pellets or compacted rings. The sleeve has a threaded sleeve bore and outer threaded surface. A cylindrical support post has a threaded shaft at one end which is threadably engaged with the sleeve bore to rigidly couple the support post to the sleeve. The other end of the post is formed with a ball portion. A hollow cylindrical collar has an inner threaded surface engageable with the outer threaded surface of the sleeve to rigidly couple the collar to the sleeve. the collar also has a socket portion which cooperates with the ball portion to flexibly connect segments together to form a ball and socket-type joint. In another embodiment, the segment comprises a support member which has a threaded shaft portion and a ball surface portion. The threaded shaft portion is engageable with an inner threaded surface of a ring for rigidly coupling the support member to the ring. The ring in turn has an outer surface at one end which is threadably engageably with a hollow cylindrical sleeve. The other end of the sleeve is formed with a socket portion for engagement with a ball portion of the support member. In yet another embodiment, a secondary rod is slidably inserted in a hollow channel through the center of the segment to provide additional strength. A method for controlling a nuclear reactor utilizing the control rod assembly is also included.

  7. Reactor control rod timing system. [LMFBR

    Science.gov (United States)

    Wu, P.T.K.

    1980-03-18

    A fluid driven jet-edge whistle timing system is described for control rods of a nuclear reactor for producing real-time detection of the timing of each control rod in its scram operation. An important parameter in reactor safety, particularly for liquid metal fast breeder reactors (LMFBR), is the time deviation between the time the control rod is released and the time the rod actually reaches the down position. The whistle has a nearly pure tone signal with center frequency (above 100 kHz) far above the frequency band in which the energy of the background noise is concentrated. Each control rod can be fitted with a whistle with a different frequency so that there is no ambiguity in differentiating the signal from each control rod.

  8. High temperature control rod assembly

    Energy Technology Data Exchange (ETDEWEB)

    Vollman, R.E.

    1991-12-24

    This patent describes a control rod assembly for use in nuclear reactor control. It comprises segments, each the segment being made of a graphite composite material, each the segment having a chamber for containing neutron-absorbing material, wherein the chamber compromises a hollow cylindrical sleeve having a first end formed with an opening for receiving the neutron-absorbing material, and having a second end formed with a sleeve bore and an outer sleeve surface; a cylindrical weight-bearing support post positioned substantially centrally of the sleeve, the support post having a first end formed as a ball surface portion and a second end formed as a ball surface portion and a second end formed as a shaft, the shaft being engageable with the sleeve bore for rigidly coupling the support post axially within the hollow sleeve, a hollow cylindrical collar having a socket lip portion correspondingly shaped to receive the ball surface portion of an adjacent support post, and having an inner surface for engaging the outer sleeve surface on the second end of the sleeve to rigidly couple the collar to the sleeve.

  9. Control Rod Malfunction at the NRAD Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Thomas L. Maddock

    2010-05-01

    The neutron Radiography Reactor (NRAD) is a training, research, and isotope (TRIGA) reactor located at the INL. The reactor is normally shut down by the insertion of three control rods that drop into the core when power is removed from electromagnets. During a routine shutdown, indicator lights on the console showed that one of the control rods was not inserted. It was initially thought that the indicator lights were in error because of a limit switch that was out of adjustment. Through further testing, it was determined that the control rod did not drop when the scram switch was initially pressed. The control rod anomaly led to a six month shutdown of the reactor and an in depth investigation of the reactor protective system. The investigation looked into: scram switch operation, console modifications, and control rod drive mechanisms. A number of latent issues were discovered and corrected during the investigation. The cause of the control rod malfunction was found to be a buildup of corrosion in the control rod drive mechanism. The investigation resulted in modifications to equipment, changes to both operation and maintenance procedures, and additional training. No reoccurrences of the problem have been observed since corrective actions were implemented.

  10. Magnetically controlled growing rods for scoliosis surgery.

    Science.gov (United States)

    Metkar, Umesh; Kurra, Swamy; Quinzi, David; Albanese, Stephen; Lavelle, William F

    2017-02-01

    Early onset scoliosis can be both a disfiguring as well as a life threatening condition. When more conservative treatments fail, pediatric spinal surgeons are forced to consider operative interventions. Traditionally, these interventions have involved the insertion of a variety of implants into the patient with a limited number of anchor points controlling the spine. In the past, these pediatric patients have had multiple surgeries for elective lengthening of these devices to facilitate their growth while attempting to control the scoliosis. These patients often experience a physical and emotional toll from their multiple repeated surgeries. Growing spine techniques have also had a noted high complication rate due to implant dislodgement and infections. Recently, the development of non-invasively, self-lengthening growing rods has occurred. These devices have the potential to allow for the devices to be lengthened magnetically in a conscious patient in the surgeon's office. Areas covered: This review summarized previously published articles in the English literature using a key word search in PubMed for: 'magnetically controlled growing rods', 'Magec rods', 'magnetic growing rods' and 'growing rods'. Expert commentary: Magnetically controlled growing rods have an advantage over growing rods in lengthening the growing spine in the absence of repetitive surgeries.

  11. Estimation of irradiated control rod worth

    Energy Technology Data Exchange (ETDEWEB)

    Varvayanni, M., E-mail: melina@ipta.demokritos.g [NCSR ' DEMOKRITOS' , PO Box 60228, 15310 Aghia Paraskevi (Greece); Catsaros, N. [NCSR ' DEMOKRITOS' , PO Box 60228, 15310 Aghia Paraskevi (Greece); Antonopoulos-Domis, M. [School of Electrical and Computer Engineering, Aristotle University of Thessaloniki, Thessaloniki (Greece)

    2009-11-15

    When depleted control rods are planned to be used in new core configurations, their worth has to be accurately predicted in order to deduce key design and safety parameters such as the available shutdown margin. In this work a methodology is suggested for the derivation of the distributed absorbing capacity of a depleted rod, useful in the case that the level of detail that is known about the irradiation history of the control rod does not allow an accurate calculation of the absorber's burnup. The suggested methodology is based on measurements of the rod's worth carried out in the former core configuration and on corresponding calculations based on the original (before first irradiation) absorber concentration. The methodology is formulated for the general case of the multi-group theory; it is successfully tested for the one-group approximation, for a depleted control rod of the Greek Research Reactor, containing five neutron absorbers. The computations reproduce satisfactorily the irradiated rod worth measurements, practically eliminating the discrepancy of the total rod worth, compared to the computations based on the nominal absorber densities.

  12. Estimation of Depth, Orientation, Length and Diameter of Long, Horizontal Ferrous Rods Using a Fluxgate Magnetometer

    Science.gov (United States)

    1993-04-01

    applications where a horizontal ferrous rod, rope, pipe or cable lies underneath a smooth planar surface at a constant depth. In such cases one often...Brown sensor as the preferred magnetometer and by constructing preliminary magnetometer sensors and circuits. Richard Pinnell , formerly with TDG...smooth planar surface at a constant depth. In such cases one often would like to determine the position and orientation in the plane, the depth of

  13. Magnetic switch for reactor control rod. [LMFBR

    Science.gov (United States)

    Germer, J.H.

    1982-09-30

    A magnetic reed switch assembly is described for activating an electromagnetic grapple utilized to hold a control rod in position above a reactor core. In normal operation the magnetic field of a permanent magnet is short-circuited by a magnetic shunt, diverting the magnetic field away from the reed switch. The magnetic shunt is made of a material having a Curie-point at the desired release temperature. Above that temperature the material loses its ferromagnetic properties, and the magnetic path is diverted to the reed switch which closes and short-circuits the control circuit for the control rod electro-magnetic grapple which allows the control rod to drop into the reactor core for controlling the reactivity of the core.

  14. Regulatory perspective on incomplete control rod insertions

    Energy Technology Data Exchange (ETDEWEB)

    Chatterton, M.

    1997-01-01

    The incomplete control rod insertions experienced at South Texas Unit 1 and Wolf Creek are of safety concern to the NRC staff because they represent potential precursors to loss of shutdown margin. Even before it was determined if these events were caused by the control rods or by the fuel there was an apparent correlation of the problem with high burnup fuel. It was determined that there was also a correlation between high burnup and high drag forces as well as with rod drop time histories and lack of rod recoil. The NRC staff initial actions were aimed at getting a perspective on the magnitude of the problem as far as the number of plants and the amount of fuel that could be involved, as well as the safety significance in terms of shutdown margin. As tests have been performed and data has been analyzed the focus has shifted more toward understanding the problem and the ways to eliminate it. At this time the staff`s understanding of the phenomena is that it was a combination of factors including burnup, power history and temperature. The problem appears to be very sensitive to these factors, the interaction of which is not clearly understood. The model developed by Westinghouse provides a possible explanation but there is not sufficient data to establish confidence levels and sensitivity studies involving the key parameters have not been done. While several fixes to the problem have been discussed, no definitive fixes have been proposed. Without complete understanding of the phenomena, or fixes that clearly eliminate the problem the safety concern remains. The safety significance depends on the amount of shutdown margin lost due to incomplete insertion of the control rods. Were the control rods to stick high in the core, the reactor could not be shutdown by the control rods and other means such as emergency boration would be required.

  15. HIGH STRENGTH CONTROL RODS FOR NEUTRONIC REACTORS

    Science.gov (United States)

    Lustman, B.; Losco, E.F.; Cohen, I.

    1961-07-11

    Nuclear reactor control rods comprised of highly compressed and sintered finely divided metal alloy panticles and fine metal oxide panticles substantially uniformly distributed theretbrough are described. The metal alloy consists essentially of silver, indium, cadmium, tin, and aluminum, the amount of each being present in centain percentages by weight. The oxide particles are metal oxides of the metal alloy composition, the amount of oxygen being present in certain percentages by weight and all the oxygen present being substantially in the form of metal oxide. This control rod is characterized by its high strength and resistance to creep at elevated temperatures.

  16. Sensitivity study of control rod depletion coefficients

    OpenAIRE

    Blomberg, Joel

    2015-01-01

    This report investigates the sensitivity of the control rod depletion coefficients, Sg, to different input parameters and how this affects the accumulated 10B depletion, β. Currently the coefficients are generated with PHOENIX4, but the geometries can be more accurately simulated in McScram. McScram is used to calculate Control Rod Worth, which in turn is used to calculate Nuclear End Of Life, and Sg cannot be generated in the current version of McScram. Therefore, it is also analyzed whether...

  17. Investigation of control rod worth and nuclear end of life of BWR control rods

    Energy Technology Data Exchange (ETDEWEB)

    Magnusson, Per

    2008-01-15

    This work has investigated the Control Rod Worth (CRW) and Nuclear End of Life (NEOL) values for BWR control rods. A study of how different parameters affect NEOL was performed with the transport code PHOENIX4. It was found that NEOL, expressed in terms of {sup 10}B depletion, can be generalized beyond the conditions for which the rod is depleted, such as different power densities and void fractions, the corresponding variation in the NEOL will be about 0.2-0.4% {sup 10}B. It was also found that NEOL results for different fuel types and different fuel enrichments have a variation of about 2-3% in {sup 10}B depletion. A comparative study on NHOL and CRW was made between PHOENIX4 and the stochastic Monte Carlo code MCNP. It was found that there is a significant difference, both due to differences in the codes and to limitations in the geometrical modeling in PHOENIX4. Since MCNP is considered more physically correct, a methodology was developed to calculate the nuclear end of life of BWR control rods with MCNP. The advantages of the methodology are that it does not require other codes to perform the depletion of the absorber material, it can describe control rods of any design and it can deplete the control rod absorber material without burning the fuel. The disadvantage of the method is that is it time-consuming.

  18. Measurements of control rod efficiency in RBMK critical assembly upon dropping of the rods

    Energy Technology Data Exchange (ETDEWEB)

    Zhitarev, V. E., E-mail: vejitarev@nnrd.kiae.su; Kachanov, V. M.; Sergevnin, A. Yu.; Lebedev, G. V., E-mail: lgv2004@mail.ru [National Research Center Kurchatov Institute (Russian Federation)

    2014-12-15

    The efficiency of control rods in the RBMK critical assembly was measured in the case where one manual-control rod (MCR) is dropped from a steady critical state, and several other MCRs were additionally dropped after 44 s. The measured number of neutrons in the assembly during and after dropping of the rods was used to calculate the efficiency values of the rods by solution of the system of point kinetics equations. A series of methods of the initial data treatment for determination of the desired values of reactivity without the calculated corrections were used.

  19. Measurements of control rod efficiency in RBMK critical assembly upon dropping of the rods

    Science.gov (United States)

    Zhitarev, V. E.; Kachanov, V. M.; Sergevnin, A. Yu.; Lebedev, G. V.

    2014-12-01

    The efficiency of control rods in the RBMK critical assembly was measured in the case where one manual-control rod (MCR) is dropped from a steady critical state, and several other MCRs were additionally dropped after 44 s. The measured number of neutrons in the assembly during and after dropping of the rods was used to calculate the efficiency values of the rods by solution of the system of point kinetics equations. A series of methods of the initial data treatment for determination of the desired values of reactivity without the calculated corrections were used.

  20. Rolls-Royce digital Rod Control System

    Energy Technology Data Exchange (ETDEWEB)

    Pouillot, M. [Rolls-Royce Civil Nuclear SAS (France)

    2010-07-01

    Full text of publication follows: Rolls-Royce has developed a new generation of Rod Control System, based on 40 years of experience. The fifth-generation Rod Control System (RCS) from Rolls-Royce offers a reliable, modular design with adaptability to your preferred platform, for modernization projects or new reactors. Flexible implementation provides the option for you to keep existing cabinets, which permits you to optimize installation approach. Main features for the power part: - Control Rod Drive Mechanism (CRDM) type: 3-coil. - Independent control of each sub-bank. - Each sub-bank is controlled by a cycler unit and 3 identical power racks, each including 4 identical power modules and a common power-supply module. - Coil-per-coil digital control: each power module embeds power-conversion, current-control, and current-monitoring functions for one coil. Control and monitoring are carried out by separate electronics in the module. Current is digitized and fully monitored by means of min-max templates. - A double-hold function is included: a power module assigned to a gripper will activate its coil if a fault risking to cause a reactor trip occurs. - Power modules are standardized, hot-pluggable and self-configured: a power module includes a set of parameters for each type of coil SG, MG, LC. The module recognizes the rack it is plugged in, and chooses automatically parameters to be used. Main benefits: - Reduced operational, maintenance, training, and inventory costs: standardization of power modules and integration of control and monitoring on the same PC-card lead to a drastic reduction of spare part types, and simplification of the system. - Easy maintenance: - Replacement of a power module solves nearly all failures due to current control or monitoring for a coil. It is done instantly thanks to hot-plug capability. - On the front plate of power-modules, LEDs provide useful information for diagnostic: current setpoint from cycler, output current bar

  1. Dependence of control rod worth on fuel burnup

    Energy Technology Data Exchange (ETDEWEB)

    Savva, P., E-mail: savvapan@ipta.demokritos.g [NCSR ' DEMOKRITOS' , PoB 60228, 15310 Aghia Paraskevi (Greece); Varvayanni, M., E-mail: melina@ipta.demokritos.g [NCSR ' DEMOKRITOS' , PoB 60228, 15310 Aghia Paraskevi (Greece); Catsaros, N., E-mail: nicos@ipta.demokritos.g [NCSR ' DEMOKRITOS' , PoB 60228, 15310 Aghia Paraskevi (Greece)

    2011-02-15

    Research highlights: Diffusion and MC calculations for rod worth dependence on burnup and Xe in reactors. One-step rod withdrawal/insertion are used for rod worth estimation. The study showed that when Xe is present the rods worth is significantly reduced. Rod worth variation with burnup depends on rod position in core. Rod worth obtained with MC code is higher than that obtained from deterministic. - Abstract: One important parameter in the design and the analysis of a nuclear reactor core is the reactivity worth of the control rods, i.e. their efficiency to absorb excess reactivity. The control rod worth is affected by parameters such as the fuel burnup in the rod vicinity, the Xe concentration in the core, the operational time of the rod and its position in the core. In the present work, two different computational approaches, a deterministic and a stochastic one, were used for the determination of the rods worth dependence on the fuel burnup level and the Xe concentration level in a conceptual, symmetric reactor core, based on the MTR fuel assemblies used in the Greek Research Reactor (GRR-1). For the deterministic approach the neutronics code system composed by the SCALE modules NITAWL and XSDRN and the diffusion code CITATION was used, while for the stochastic one the Monte Carlo code TRIPOLI was applied. The study showed that when Xe is present in the core, the rods worth is significantly reduced, while the rod worth variation with increasing burnup depends on the rods position in the core grid. The rod worth obtained with the use of the Monte Carlo code is higher than the one obtained from the deterministic code.

  2. Benchmark of CFD Simulations Using Temperatures Measured Within an Enclosed Array of Heater Rods Oriented Vertically and Horizontally

    Science.gov (United States)

    Chalasani, Narayana Rao

    Experiments and computational fluid dynamics/radiation heat transfer simulations of an 8x8 array of heated rods within an aluminum enclosure are performed. This configuration represents a region inside the channel of a spent boiling water reactor (BWR) fuel assembly between two consecutive spacer plates. The heater rods can be oriented horizontally or vertically to represent transport or storage conditions, respectively. The measured and simulated rod-to-wall temperature differences are compared for various heater rod power levels (100, 200, 300, 400 and 500W), gases (Helium and Nitrogen), enclosure wall temperatures, pressures (1, 2 and 3 atm) and orientations (Horizontal and Vertical) to assess the accuracy of the computational fluid dynamics (CFD) code. For analysis of spent nuclear fuel casks, it is crucial to predict the temperature of the hottest rods in an assembly to ensure that none of the fuel cladding exceeds its temperature limit. The measured temperatures are compared to those determined using CFD code to assess the adequacy of the computer code. Simulations show that temperature gradients are much steeper near the enclosure walls than they are near the center of the heater rod array. The measured maximum heater rod temperatures are above the center of heater rod array for nitrogen experiments in both horizontal and vertical orientations, whereas for helium the maximum temperatures are at the center of heater rod array irrespective of the orientation due to the high thermal conductivity of the helium gas. The measured temperatures of rods at symmetric locations are not identical, and the difference is larger for rods close to the enclosure wall than for those far from it. Small but uncontrolled deviations of the rod positions away from the design locations may cause these differences. For 2-inch insulated nitrogen experiment in vertical orientation with 1 atm pressure and a total heater rod power of 500 W, the maximum measured heater rod and enclosure

  3. Cavity flow control using a rod in cross flow

    Science.gov (United States)

    Sarpotdar, Shekhar

    For a variety of aerodynamic conditions and geometric configurations fluid structure interactions give rise to a reverberant field. This phenomenon, referred to as resonant acoustics, has practical importance due to its undesirable effects such as noise, structural loading, and unsteady flow field. Several flow control technologies exist but they lose efficacy at off-design conditions. With the focus on expanding their operating envelope, the present work investigates the physics of the flow control using a combination of detailed experimental measurements and theoretical analysis. The model resonant acoustic flow problem that we chose for our study is cavity tones, i.e., the high intensity acoustic tones produced by high speed air moving over rectangular cavity. The flow control actuator is a rod in cross flow, i.e., a thin horizontal rod placed upstream of the cavity. In the present work, a detailed experimental study has been undertaken to characterize the acoustics, mean velocity field as well as the pressure perturbation field both inside and outside of the cavity. Control cases with contrasting suppression results are chosen to illustrate important aspects of the mean flow field. To investigate whether the cylinder, through its wake, changes the stability characteristics of the shear layer that develops over the cavity, stability analysis of the shear layer is undertaken. First, stability of artificial velocity profiles that are prototypical of the experimentally measured velocity profiles is investigated; in order to determine what parameters of the velocity profiles influence the stability of the shear layer the most. Next stability of experimentally measured velocity profiles is evaluated to calculate integrated growth rates along the length of the cavity. Mean velocity data is also used to elucidate the shear layer lift off mechanism of the rod. Both integrated growth range and shear layer lift off data are compared with the acoustic suppression results

  4. Approximation in LQG control of a thermoelastic rod

    Science.gov (United States)

    Gibson, J. S.; Rosen, I. G.; Tao, G.

    1989-01-01

    Control and estimator gains are computed for linear-quadratic-Gaussian (LQG) optimal control of the axial vibrations of a thermoelastic rod. The computations are based on a modal approximation of the partial differential equations representing the rod, and convergence of the approximations to control and estimator gains is the main issue.

  5. Investigation of axial power gradients near a control rod tip

    Energy Technology Data Exchange (ETDEWEB)

    Loberg, John, E-mail: John.Loberg@fysast.uu.se [Uppsala University, Department of Physics and Astronomy, Division of Applied Nuclear Physics, Box 525, SE-75120 Uppsala (Sweden); Osterlund, Michael, E-mail: Michael.Osterlund@fysast.uu.se [Uppsala University, Department of Physics and Astronomy, Division of Applied Nuclear Physics, Box 525, SE-75120 Uppsala (Sweden); Bejmer, Klaes-Hakan, E-mail: Klaes-Hakan.Bejmer@vattenfall.com [Vattenfall Nuclear Fuel AB, Jaemtlandsgatan 99, 162 60 Vaellingby, Stockholm (Sweden); Blomgren, Jan, E-mail: Jan.Blomgren@vattenfall.com [Vattenfall Nuclear Fuel AB, Jaemtlandsgatan 99, 162 60 Vaellingby, Stockholm (Sweden); Kierkegaard, Jesper, E-mail: Jesper.Kierkegaar@vattenfall.com [Vattenfall Nuclear Fuel AB, Jaemtlandsgatan 99, 162 60 Vaellingby, Stockholm (Sweden)

    2011-07-15

    Highlights: > Pin power gradients near BWR control rod tips have been investigated. > A control rod tip is modeled in MCNP and compared to simplified 2D/3D geometry. > Small nodes increases pin power gradients; standard nodes underestimates gradients. > The MCNP results are validated against axial gamma scan of a controlled fuel pin. - Abstract: Control rod withdrawal in BWRs induces large power steps in the adjacent fuel assemblies. This paper investigates how well a 2D/3D method, e.g., CASMO5/SIMULATE5 computes axial pin power gradients adjacent to an asymmetrical control-rod tip in a BWR. The ability to predict pin power gradients accurately is important for safety considerations whereas large powers steps induced by control rod withdrawal can cause Pellet Cladding Interaction. The computation of axial pin power gradients axially around a control rod tip is a challenging task for any nodal code. On top of that, asymmetrical control rod handles are present in some BWR designs. The lattice code CASMO requires diagonal symmetry of all control rod parts. This introduces an error in computed pin power gradients that has been evaluated by Monte Carlo calculations. The results show that CASMO5/SIMULATE5, despite the asymmetrical control rod handle, is able to predict the axial pin power gradient within 1%/cm for axial nodal sizes of 15-3.68 cm. However, a nodal size of 3.68 cm still causes underestimations of pin power gradients compared with 1 cm nodes. Furthermore, if conventional node sizes are used, {approx}15 cm, pin power gradients can be underestimated by over 50% compared with 1 cm nodes. The detailed axial pin power profiles from MCNP are corroborated by measured gamma scan data on fuel rods irradiated adjacent to control rods.

  6. Optimized Control Rods of the BR2 Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kalcheva, Silva; Koonen, E.

    2007-09-15

    At the present time the BR-2 reactor uses control elements with cadmium as neutron absorbing part. The lower section of the control element is a beryllium assembly cooled by light water. Due to the burn up of the lower end of the cadmium section during the reactor operation, the presently used rods for reactivity control of the BR-2 reactor have to be replaced by new ones. Considered are various types Control Rods with full active part of the following materials: cadmium (Cd), hafnium (Hf), europium oxide (Eu2O3) and gadolinium (Gd2O3). Options to decrease the burn up of the control rod material in the hot spot, such as use of stainless steel in the lower active part of the Control Rod are discussed. Comparison with the characteristics of the presently used Control Rods types is performed. The changing of the characteristics of different types Control Rods and the perturbation effects on the reactor neutronics during the BR-2 fuel cycle are investigated. The burn up of the Control Rod absorbing material, total and differential control rods worth, macroscopic and effective microscopic absorption cross sections, fuel and reactivity evolution are evaluated during approximately 30 operating cycles.

  7. Control rod drive for high temperature gas cooled reactor

    Institute of Scientific and Technical Information of China (English)

    DengJun-Xian; XuJi-Ming; 等

    1998-01-01

    This control rod drive is developed for HTR-10 high temperature gas cooled test reactor.The stepmotor is prefered to improve positioning of the control rod and the scram behavior.The preliminary test in 1600170 ambient temperature shows that the selected stepmotor and transmission system can meet the main operation function requirements of HTR-10.

  8. Control rod reactivity measurement by rod-drop method at a fast critical assembly

    Energy Technology Data Exchange (ETDEWEB)

    Song, L.; Yin, Y.; Lian, X.; Zheng, C. [Inst. of Nuclear Physics and Chemistry in CAEP, P. O. Box 919 210, Mianyang, Sichuan, 621900 (China)

    2012-07-01

    Rod-drop experiments were carried out to estimate the reactivity of the control rod of a fast critical assembly operated by CAEP. Two power monitor systems were used to obtain the power level and integration method was used to process the data. Three experiments were performed. The experimental results of the reactivity from the two power monitor systems were consistent and showed a reasonable range of reactivity compared to results from positive period method. (authors)

  9. Do rod signals control stimulus field prevalence in binocular rivalry?

    Science.gov (United States)

    Young, R S; Young, G A

    1979-02-01

    We tested the hypothesis that rod signals mediate the effect of luminance on field prevalence in binocular rivalry. Results show that (1) field prevalence saturates at a luminance that is less than 0.001 that of the value reported for rod saturation, (2) the spectral sensitivity inferred from the prevalence-luminance relationship is not scotopic, and (3) the prevalence-luminance relationship does not behave univariantly under all chromatic conditions. We conclude that rod signals alone do not control field prevalence.

  10. Operation of Control Rod Driving Mechanism controller at HANARO

    Energy Technology Data Exchange (ETDEWEB)

    Gyu, Doo Seung; Woo, Lee Min; San, Choe Yeong; Kyoo, Kim Hyung [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    HANARO (High flux Advanced Neutron Application Reactor) achieved its first critical operation in 1995. Recently, there has been fast developments in the field of electronics. Many manufacturers of I and C components have disappeared or merged with the other companies. The suppliers of the control systems of the CRDM (Control Rod Driving Mechanism) at HANARO have disappeared. Therefore, we needed to change the control system of the CRDM since we cannot be provided with maintenance any longer. In this paper, we investigated the operation of the control system of the CRDM when the controller and motor driver are changed.

  11. Control wetting state transition by micro-rod geometry

    Science.gov (United States)

    He, Yang; Jiang, Chengyu; Wang, Shengkun; Yin, Hengxu; Yuan, Weizheng

    2013-11-01

    Understanding the effect of micro-structure geometry on wetting state transition is important to design and control surface wettability. Micro-rod model was proposed and the relationship between micro-rod geometry and wetting state was investigated in the paper taking into account only the surface roughness and neglecting the chemistry interaction. Micro-rods with different geometric parameters were fabricated using micro-fabrication technology. Their contact angles were measured and compared with theoretical ones. The experimental results indicated that increasing the height and decreasing the space of micro-rod may result in Cassie wetting state, while decreasing the height and increasing the space may result in Wenzel wetting state. A suspended wetting state model due to scallops was proposed. The wetting state transition was interpreted by intruding height, de-pinning and sag mechanism. It may offer a facile way to control the surface wetting state transition by changing the geometry of micro-rod.

  12. Fatigue Life Improving of Drill Rod by Inclusion Control

    Science.gov (United States)

    Wang, Linzhu; Yang, Shufeng; Li, Jingshe; Liu, Wei; Zhou, Yinghao

    2016-08-01

    Large and hard inclusions often deteriorate the service performance and reduce the fatigue lifetime of drill rods. In this paper, the main reasons of the rupture of drill rods were analyzed by the examination of their fracture and it is found that the large inclusions were the main reason of breakage of rod drill. The inclusions were high of Ca content or Al2O3 rich. Smaller and better deformability inclusions were obtained by the optimization of refining slag, calcium treatment process and the flow control devices of tundish. Results of industrial experiment after optimization show that total oxygen content of drill rods decreased by more than 50%, macro-inclusions weight fraction decreased from about 4 mg/10 kg to about 0.3 mg/10 kg and the micro-inclusions average size decreased from 6 to 3.6 μm. The average using times of drill rods after optimization were increased by about 60%.

  13. Controllable single photon stimulation of retinal rod cells

    CERN Document Server

    Phan, Nam Mai; Bessarab, Dmitri A; Krivitsky, Leonid A

    2013-01-01

    Retinal rod cells are commonly assumed to be sensitive to single photons [1, 2, 3]. Light sources used in prior experiments exhibit unavoidable fluctuations in the number of emitted photons [4]. This leaves doubt about the exact number of photons used to stimulate the rod cell. In this letter, we interface rod cells of Xenopus laevis with a light source based on Spontaneous Parametric Down Conversion (SPDC) [5], which provides one photon at a time. Precise control of generation of single photons and directional delivery enables us to provide unambiguous proof of single photon sensitivity of rod cells without relying on the statistical assumptions. Quantum correlations between single photons in the SPDC enable us to determine quantum efficiency of the rod cell without pre-calibrated reference detectors [6, 7, 8]. These results provide the path for exploiting resources offered by quantum optics in generation and manipulation of light in visual studies. From a more general perspective, this method offers the ult...

  14. Design requirement on KALIMER control rod assembly duct

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, W.; Kang, H. Y.; Nam, C.; Kim, J. O.; Kim, Y. J

    1998-03-01

    This document establishes the design guidelines which are needs for designing the control rod assembly duct of the KALIMER as design requirements. it describes control rod assembly duct of the KALIMER and its requirements that includes functional requirements, performance requirements, interfacing systems, design limits and strength requirements, seismic requirements, structural requirements, environmental requirements, reliability and safety requirements, standard and codes, QA programs, and other requirements. The control rod system consists of three parts, which are drive mechanism, drive-line, and absorber bundle. This report deals with the absorber bundle and its outer duct only because the others are beyond the scope of fuel system design. The guidelines for design requirements intend to be used for an improved design of the control rod assembly duct of the KALIMER. (author). 19 refs.

  15. Remotely operated gripper provides vertical control rod movement

    Science.gov (United States)

    Hutter, E.; Koch, L. J.

    1968-01-01

    Remote actuation of a gripper shaft affects vertical engagement between a drive shaft and control rod. A secondary function of the gripper is to provide remote indication of positive completion of the gripping or ungripping operation.

  16. Computer program for automatic generation of BWR control rod patterns

    Energy Technology Data Exchange (ETDEWEB)

    Taner, M.S.; Levine, S.H.; Hsia, M.Y. (Pennsylvania State Univ., University Park (United States))

    1990-01-01

    A computer program named OCTOPUS has been developed to automatically determine a control rod pattern that approximates some desired target power distribution as closely as possible without violating any thermal safety or reactor criticality constraints. The program OCTOPUS performs a semi-optimization task based on the method of approximation programming (MAP) to develop control rod patterns. The SIMULATE-E code is used to determine the nucleonic characteristics of the reactor core state.

  17. Control Rod Driveline Reactivity Feedback Model for Liquid Metal Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Young-Min; Jeong, Hae-Yong; Chang, Won-Pyo; Cho, Chung-Ho; Lee, Yong-Bum

    2008-01-15

    The thermal expansion of the control rod drivelines (CRDL) is one important passive mitigator under all unprotected accident conditions in the metal and oxide cores. When the CRDL are washed by hot sodium in the coolant outlet plenum, the CRDL thermally expands and causes the control rods to be inserted further down into the active core region, providing a negative reactivity feedback. Since the control rods are attached to the top of the vessel head and the core attaches to the bottom of the reactor vessel (RV), the expansion of the vessel wall as it heats will either lower the core or raise the control rods supports. This contrary thermal expansion of the reactor vessel wall pulls the control rods out of the core somewhat, providing a positive reactivity feedback. However this is not a safety factor early in a transient because its time constant is relatively large. The total elongated length is calculated by subtracting the vessel expansion from the CRDL expansion to determine the net control rod expansion into the core. The system-wide safety analysis code SSC-K includes the CRDL/RV reactivity feedback model in which control rod and vessel expansions are calculated using single-nod temperatures for the vessel and CRDL masses. The KALIMER design has the upper internal structures (UIS) in which the CRDLs are positioned outside the structure where they are exposed to the mixed sodium temperature exiting the core. A new method to determine the CRDL expansion is suggested. Two dimensional hot pool thermal hydraulic model (HP2D) originally developed for the analysis of the stratification phenomena in the hot pool is utilized for a detailed heat transfer between the CRDL mass and the hot pool coolant. However, the reactor vessel wall temperature is still calculated by a simple lumped model.

  18. Control of rod shedding in the frog retina.

    Science.gov (United States)

    Basinger, S F; Hollyfield, J G

    1980-01-01

    In all vertebrate species examined thus far, rod outer segment shedding follows a cyclic pattern in which the outer segment tips are shed shortly after the onset of light. Work in the rat retina suggests that rod shedding may follow a circadian rhythm which is controlled by one or more circadian oscillators. Our results in the frog retina are significantly different in that: rod shedding can be driven by the onset of light or other environmental cues; shedding does not persist in constant darkness; shedding is unaffected in frogs with chronic unilateral or bilateral optic nerve section; and shedding will rapidly phase shift to the time of light onset on a wide variety of diurnal cycles. Thus, rod shedding in the frog retina does not appear to be a classical circadian rhythm.

  19. Characterization of control rod worths and fuel rod power peaking factors in the university of Utah TRIGA Mark I reactor

    OpenAIRE

    Alroumi Fawaz; Kim Donghoon; Schow Ryan; Jevremovic Tatjana

    2016-01-01

    Control rod reactivity (worths) for the three control rods and fuel rod power peaking factors in the University of Utah research reactor (100 kW TRIGA Mark I) are characterized using the AGENT code system and the results described in this paper. These values are compared to the MCNP6 and existing experimental measurements. In addition, the eigenvalue, neutron spatial flux distributions and reaction rates are analyzed and discussed. The AGENT code system is ...

  20. Dysprosium titanate as an absorber material for control rods

    Science.gov (United States)

    Risovany, V. D.; Varlashova, E. E.; Suslov, D. N.

    2000-09-01

    Disprosium titanate is an attractive control rod material for the thermal neutron reactors. Its main advantages are: insignificant swelling, no out-gassing under neutron irradiation, rather high neutron efficiency, a high melting point (˜1870°C), non-interaction with the cladding at temperatures above 1000°C, simple fabrication and easily reprocessed non-radioactive waste. It can be used in control rods as pellets and powder. The disprosium titanate control rods have worked off in the MIR reactor for 17 years, in VVER-1000 - for 4 years without any operating problems. After post-irradiation examinations this type of control rod having high lifetime was recommended for the VVER and RBMK. The paper presents the examination results of absorber element dummies containing dysprosium titanate, irradiated in the SM reactor to the neutron fluence of 3.4×10 22 cm -2 ( E>0.1 MeV) and, also, the data on structure, thermal-physical properties of dysprosium titanate, efficiency of dysprosium titanate control rods.

  1. Control rod worth calculations using deterministic and stochastic methods

    Energy Technology Data Exchange (ETDEWEB)

    Varvayanni, M. [NCSR ' DEMOKRITOS' , PO Box 60228, 15310 Aghia Paraskevi (Greece); Savva, P., E-mail: melina@ipta.demokritos.g [NCSR ' DEMOKRITOS' , PO Box 60228, 15310 Aghia Paraskevi (Greece); Catsaros, N. [NCSR ' DEMOKRITOS' , PO Box 60228, 15310 Aghia Paraskevi (Greece)

    2009-11-15

    Knowledge of the efficiency of a control rod to absorb excess reactivity in a nuclear reactor, i.e. knowledge of its reactivity worth, is very important from many points of view. These include the analysis and the assessment of the shutdown margin of new core configurations (upgrade, conversion, refuelling, etc.) as well as several operational needs, such as calibration of the control rods, e.g. in case that reactivity insertion experiments are planned. The control rod worth can be assessed either experimentally or theoretically, mainly through the utilization of neutronic codes. In the present work two different theoretical approaches, i.e. a deterministic and a stochastic one are used for the estimation of the integral and the differential worth of two control rods utilized in the Greek Research Reactor (GRR-1). For the deterministic approach the neutronics code system SCALE (modules NITAWL/XSDRNPM) and CITATION is used, while the stochastic one is made using the Monte Carlo code TRIPOLI. Both approaches follow the procedure of reactivity insertion steps and their results are tested against measurements conducted in the reactor. The goal of this work is to examine the capability of a deterministic code system to reliably simulate the worth of a control rod, based also on comparisons with the detailed Monte Carlo simulation, while various options are tested with respect to the deterministic results' reliability.

  2. Simulation on the HTTR Control Rod Withdrawal Test

    Energy Technology Data Exchange (ETDEWEB)

    Jun, Ji Su; Tak, Nam-il; Lim, Hong Sik [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    This paper describes the GAMMA+ code simulation of HTTR control rod withdrawal test. The simulation is done to examine the effect of GAMMA+ code's single-zone and multi-zone point kinetics models on the prediction of the reactor power response during HTTR control rod withdrawal test. In addition, it has an objective to examine how the reactor power response is affected by the application of the fuel temperature coefficients on TRISO kernel or compact rod. The calculation results of reactivity response and reactor power response are compared with the test results which were obtained at the initial power of 15.2 MW with the amount of reactivity insertion by control rod withdrawal to 3.4e-04 (dk/k) in 6.59 seconds. All GAMMA+ simulation results on a HTTR CRW test showed good predictions with the measured data. In particular, TRISO Kernel Model where the fuel temperature coefficients applied on the TRISO particle produced a better prediction within a 1.5% measured data and made no difference between the single-zone model and the multi-zone point kinetics model. During the control rod withdrawal event which is a fast transient, the total reactivity is mainly affected by the inserted reactivity and the reactivity response due to the change of the fuel temperature and the graphite moderator temperature.

  3. Applying GPS to check horizontal control quality

    Directory of Open Access Journals (Sweden)

    Jakub Vincent

    2004-03-01

    Full Text Available GPS technologies can also be used for check quality in available horizontal point set with coordinates CJ of the frame S-JTSK. When survey and setting-out tasks should be performed in certain area, one can found in it allways some points of the fundamental and detail state controls. To use these points for some actual aims, it is necessary to investigate their compatibility (among the point mark positions and the point coordinate of control points. This can be done using GPS surveying that may be at the same time employed to determine the new point in the relevant area.Principle of quality investigatingf an existing control is founded on determination of point coordinates CJt from GPS measurements. Then, based on discrepancies among the "official" netpoint coordinates CJ and coordinates CJt "given by GPS", it can be estimated the degree and the real compatibility dislocations in the network structure of the existing points.Realisation procedure for the introduced investigation is demonstrated on GPS checking (by SOKKIA STRATUS receivers horizontal control for reconstruction of a railway bridge on river Bodrog in East Slovakia.It can be shown from the results in Table 3, that points P3 and P7 are useless due to their incompatibility (inconsistency in the inspected point set. For other 7 points (Table 7 the average measure of incompatibility reads 9.8 mm that make possible applying these points for precise setting-out

  4. Control Rod Reactivity Curves for the Annular Core Research Reactor

    Science.gov (United States)

    Depriest, K. Russell; Kajder, Karen C.; Frye, Jason N.; Denman, Matthew R.

    2009-08-01

    Experiments were conducted at the Annular Core Research Reactor (ACRR) to increase the fidelity of the control rod integral reactivity worth curve. This experiment series was designed to refine the integral reactivity curve used for pulse yield prediction and eliminate the need for operator compensation in the pulse setup. The experiment series consisted of delayed critical and positive period measurements with various ACRR cavity configurations. An improved integral reactivity worth curve for the ACRR control rods has been constructed using the positive period measurements, the delayed critical measurements, and radiation transport modeling of the reactor. A series of prompt period measurements is used to validate that the new control rod curve more accurately predicts the energy yield of the pulse operations. The new reactivity worth curve is compared with the current curve that was developed using traditional approaches.

  5. Estimation and control in HTGR fuel rod fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Downing, D J; Bailey, M J

    1980-01-01

    A control algorithm has been derived for a HTGR Fuel Rod Fabrication Process utilizing the method of Box and Jenkins. The estimator is a Kalman filter and is compared with a Least Square estimator and a standard control chart. The effects of system delays are presented.

  6. Fabrication of control rods for the High Flux Isotope Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sease, J.D.

    1998-03-01

    The High Flux Isotope Reactor (HFIR) is a research-type nuclear reactor that was designed and built in the early 1960s and has been in continuous operation since its initial criticality in 1965. Under current plans, the HFIR is expected to continue in operation until 2035. This report updates ORNL/TM-9365, Fabrication Procedure for HFIR Control Plates, which was mainly prepared in the early 1970's but was not issued until 1984, and reflects process changes, lessons learned in the latest control rod fabrication campaign, and suggested process improvements to be considered in future campaigns. Most of the personnel involved with the initial development of the processes and in part campaigns have retired or will retire soon. Because their unlikely availability in future campaigns, emphasis has been placed on providing some explanation of why the processes were selected and some discussions about the importance of controlling critical process parameters. Contained in this report is a description of the function of control rods in the reactor, the brief history of the development of control rod fabrication processes, and a description of procedures used in the fabrication of control rods. A listing of the controlled documents and procedures used in the last fabrication campaigns is referenced in Appendix A.

  7. The improvement of control rod in experimental fast reactor JOYO. The development of a sodium bonded type control rod

    Energy Technology Data Exchange (ETDEWEB)

    Soga, T.; Miyakawa, S.; Mitsugi, T. [Japan Nuclear Cycle Development Inst., Oarai Engineering Center, Irradiation Center, Irradiation and Administration Section, Oarai, Ibaraki (Japan)

    1999-06-01

    Currently, the lifetime of control rods in JOYO is limited by Absorber-Cladding Mechanical Interaction (ACMI) due to swelling of B{sub 4}C(boron carbide) pellets accelerated by relocation of pellet fragments. A sodium bonded type control rod was developed which improves the thermal conductivity by means of charging sodium into the gap between B{sub 4}C and cladding and by utilizing a shroud which wraps the pellet fragments in a thin tube. This new design will be able to enlarge the gap between B{sub 4}C and cladding, without heating B{sub 4}C or fragment relocation, thus extending the life of the control rod. The sodium bonded type will be fabricated as the ninth reload control rods in JOYO. (1) The specification of a sodium bonded type control rod was determined with the wide gap between B{sub 4}C and cladding. In the design simulation, main component temperature were below the maximum limit. And the local heating by helium bubble generated from B{sub 4}C in the sodium gap, was not a serious problem in the analysis which was considered. (2) A structural design for the sodium entrance into the pin was determined. A formula was developed which the limit for sodium charging given physical dimension of the structure and sodium property. Result from sodium out-pile experiments validated the theoretical formula. (3) The analysis of ACMI indicated a lifetime extension of the sodium bonded type by 4.6% in comparison with lifetime of the helium bonded type of 1.6%. This is due to the boron10 burn-up rate being three times higher in the sodium bonded type than in the helium bonded type. To achieve a target burn-up 10% in the future, it will be necessary to modify design based on irradiation data which will be obtained by practical use of the sodium bonded control rods in JOYO. (4) The effects due to Absorber-Cladding Chemical Interaction (ACCI) were reduced by controlling the cladding temperature and chromium coating to the cladding's inner surface. It was confirmed

  8. Experimental Research on Water Boiling Heat Transfer on Horizontal Copper Rod Surface at Sub-Atmospheric Pressure

    Directory of Open Access Journals (Sweden)

    Li-Hua Yu

    2015-09-01

    Full Text Available In recent years, water (R718 as a kind of natural refrigerant—which is environmentally-friendly, safe and cheap—has been reconsidered by scholars. The systems of using water as the refrigerant, such as water vapor compression refrigeration and heat pump systems run at sub-atmospheric pressure. So, the research on water boiling heat transfer at sub-atmospheric pressure has been an important issue. There are many research papers on the evaporation of water, but there is a lack of data on the characteristics at sub-atmospheric pressures, especially lower than 3 kPa (the saturation temperature is 24 °C. In this paper, the experimental research on water boiling heat transfer on a horizontal copper rod surface at 1.8–3.3 kPa is presented. Regression equations of the boiling heat transfer coefficient are obtained based on the experimental data, which are convenient for practical application.

  9. Improvement Research of Control Rod Drive Mechanism in CARR

    Institute of Scientific and Technical Information of China (English)

    ZHU; Xue-wei; ZHEN; Jian-xiao; LUO; Zhong; YANG; Kun; WANG; Yi-shi; JIA; Yue-guang

    2013-01-01

    We take an improvement research of synchronization in process of control rod drive mechanism(CRDM)inversion.An experimental prototype is designed based on the structure and function of the CRDM,we take some experiments on this experimental prototype,such as maximum loading force experiment,coil temperature rise experiment and stiffness experiment,achieve important magnetic

  10. Linear motion device and method for inserting and withdrawing control rods

    Science.gov (United States)

    Smith, J.E.

    Disclosed is a linear motion device and more specifically a control rod drive mechanism (CRDM) for inserting and withdrawing control rods into a reactor core. The CRDM and method disclosed is capable of independently and sequentially positioning two sets of control rods with a single motor stator and rotor. The CRDM disclosed can control more than one control rod lead screw without incurring a substantial increase in the size of the mechanism.

  11. Method and apparatus for monitoring the control rods of a nuclear reactor

    Energy Technology Data Exchange (ETDEWEB)

    Gravelle, A.; Marini, J.; Romy, D.

    1984-12-04

    Method and apparatus for monitoring the movement of the control rods of a nuclear reactor. The number of steps of movement in either direction of the rod from which the control rod is suspended is counted. According to the height of the step, an indication of the position of the suspension rod and of the control rod. The apparatus comprises devices for measuring the speed of movement of the control rod, for logging variations in speed higher than a given value, and for counting such variations according to their sign. The invention is particularly useful in pressurized water nuclear reactors.

  12. A measurement of a control rod drop using an LVDT

    Science.gov (United States)

    Choi, Myoung-Hwan; Kim, Ji-Ho; Huh, Hyung; Yu, Je-Yong; Sohn, Dong-Seong

    2010-03-01

    A control element drive mechanism is a reactor regulating system, which is to insert, withdraw, or maintain a control rod containing neutron-absorbing material within a reactor core to control the reactivity of the reactor. The ball-screw type CEDM for the small and medium research reactor has a spring-hydraulic damper to reduce the impact force due to the free drop of the CEDM. This paper describes the experimental results to obtain the drop characteristics of the CEDM. The tests are performed by using a full-scale structure except the control element assembly, and a drop time and displacement after an impact are measured by using an LVDT. The influences of the rod weight and the drop height on the drop behavior are also estimated on the basis of test results. In case of the longest stroke, the drop time of the control rod is within 4.5 seconds to meet the design requirement. The behavior after the impact shows a general damping motion of the spring-damper system, and the maximum displacement is measured as 15.6 mm.

  13. Scram simulation of a control rod drive mechanism of a pressurized water reactor under seismic conditions

    Energy Technology Data Exchange (ETDEWEB)

    Fujita, Katsuhisa; Shinohara, Yoshikazu; Ichinoo, Hiroyuki; Yoshikawa, Eiji; Nambu, Kiyoshi; Nomura, Tomonori.

    1987-03-01

    Control rod drop verification experiments of Mitsubishi pressurized water reactor under seismic conditions are performed to confirm the insertion function of control rods into the core. To evaluate these tests, computer simulations are performed. The scram time of control rods under seismic conditions was confirmed to meet the scram function. The behavior of the dropping control rods and the scram time obtained by the computer simulation show a very good correspondence with the results of verification experiments.

  14. Control rod drop surveillance using two friction coefficients

    OpenAIRE

    Blázquez, Juan; Vallejo, I.; García-Berrocal Sánchez, Agustin; Balbás Antón, Miguel

    2011-01-01

    In the case of large burnup, a control rod (CR) guide tube in the pressurized water reactor of a commercial nuclear power plant might bend. As a consequence, a CR drop experiment may indicate an event of a CR partially inserted and whether the CR should be deemed inoperable. Early prevention of such an event can be achieved by measuring two friction coefficients: the hydraulic coefficient and the sliding coefficient. The hydraulic coefficient hardly changes, so that the curvature of the guide...

  15. Measurements of control rod worth by modified inverse kinetic method

    Energy Technology Data Exchange (ETDEWEB)

    Bobrov, A. A.; Lebedev, G. V., E-mail: lgv2004@mail.ru; Nechaev, Yu. A. [Russian Research Centre Kurchatov Institute (Russian Federation)

    2011-12-15

    Results of control rod worth measurements on the Astra critical assembly at the Russian Research Centre Kurchatov Institute are presented. The measurements were carried out by the modified inverse kinetics method, which is based on the use of experimental information about the variation of neutron detector readings only after introducing a reactivity perturbation. Calculated corrections are not required. The results of measurements do not depend on the neutron detector position.

  16. Control rod drive WWER 1000 – tuning of input parameters

    OpenAIRE

    Markov P.; Valtr O.

    2007-01-01

    The article picks up on the contributions presented at the conferences Computational Mechanics 2005 and 2006, in which a calculational model of an upgraded control rod linear stepping drive for the reactors WWER 1000 (LKP-M/3) was described and results of analysis of dynamical response of its individual parts when moving up- and downwards were included. The contribution deals with the tuning of input parameters of the 3rd generation drive with the objective of reaching its running as smooth a...

  17. Control of guanylate cyclase activity in the rod outer segment.

    Science.gov (United States)

    Pannbacker, R G

    1973-12-14

    Mammalian photoreceptors contain a guanylate cyclase which has a high specific activity and is inhibited by exposure of the rod outer segment to light. Several minutes are required for this inhibition to take effect, indicating that it is not a step in visual excitation. The activity of the enzyme is sensitive to the concentration of calcium ion in the medium, suggesting that light-induced changes in calcium distribution in the photoreceptor could control guanylate cyclase activity.

  18. Characterization of control rod worths and fuel rod power peaking factors in the university of Utah TRIGA Mark I reactor

    Directory of Open Access Journals (Sweden)

    Alroumi Fawaz

    2016-01-01

    Full Text Available Control rod reactivity (worths for the three control rods and fuel rod power peaking factors in the University of Utah research reactor (100 kW TRIGA Mark I are characterized using the AGENT code system and the results described in this paper. These values are compared to the MCNP6 and existing experimental measurements. In addition, the eigenvalue, neutron spatial flux distributions and reaction rates are analyzed and discussed. The AGENT code system is widely benchmarked for various reactor types and complexities in their geometric arrangements of the assemblies and reactor core material distributions. Thus, it is used as a base methodology to evaluate neutronics variables of the research reactor at the University of Utah. With its much shorter computation time than MCNP6, AGENT provides agreement with the MCNP6 within a 0.5 % difference for the eigenvalue and a maximum difference of 10% in the power peaking factor values. Differential and integral control rod worths obtained by AGENT show well agreement with MCNP6 and the theoretical model. However, regulating the control rod worth is somewhat overestimated by both MCNP6 and AGENT models when compared to the experimental/theoretical values. In comparison to MCNP6, the total control rod worths and shutdown margin obtained with AGENT show better agreement to the experimental values.

  19. Flow mixing inside a control-rod guide tube - Experimental tests and CFD simulations

    Energy Technology Data Exchange (ETDEWEB)

    Angele, Kristian, E-mail: Kristian.Angele@vattenfall.com [Vattenfall Research and Development AB, SE-81426 Aelvkarleby (Sweden); Odemark, Ylva; Cehlin, Mathias; Hemstroem, Bengt; Hoegstroem, Carl-Maikel; Henriksson, Mats [Vattenfall Research and Development AB, SE-81426 Aelvkarleby (Sweden); Tinoco, Hernan; Lindqvist, Hans [Forsmarks Kraftgrupp AB, SE-74203 Oesthammar (Sweden)

    2011-12-15

    This paper covers a combined experimental and computational effort carried out at Vattenfall Research and Development AB in order to study the thermal mixing in the annular region between a top tube and a control-rod stem. The low frequency thermal fluctuations in this region can result in problems with thermal fatigue and have caused cracks in the control-rod stems of several nuclear reactors (). The flow in the vertical annular region formed by the top tube and the control-rod stem is characterized by the mixing of hot bypass flow with cold crud-removal flow. The crud-removal flow is flowing upwards along the control-rod stem, and the warmer bypass flow is entering through eight horizontal holes positioned in the lower part of the guide tube and four holes in the upper part of the top tube, forming jets. Two full-scale models of a control rod, including the control-rod stem and the guide tube, were constructed. The first model, designed to work at atmospheric conditions, was made of Plexiglass, in order to be able to visualize the mixing process, whereas the second one was made of steel to allow for a higher temperature difference between the two flows, and the heating of the top tube. CFD simulations of the case at atmospheric conditions were also carried out. Both the experiments and the simulations showed that the mixing region between the cold crud-removal flow and the warm bypass flow is dominated by large flow structures coming from above. The process is characterized by low frequency, high amplitude temperature fluctuations. The process is basically hydrodynamic, caused by the downward transport of flow structures originated at the upper bypass inlets. The damping thermal effects through buoyancy is of secondary importance, as also the scaling analysis shows, however a slight damping of the temperature fluctuations can be seen due to natural convection due to a pre-heating of the cold crud-removal flow. The comparison between numerical and experimental

  20. Implementation of CTRLPOS, a VENTURE module for control rod position criticality searches, control rod worth curve calculations, and general criticality searches

    Energy Technology Data Exchange (ETDEWEB)

    Smith, L.A.; Renier, J.P.

    1994-06-01

    A module in the VENTURE reactor analysis code system, CTRLPOS, is developed to position control rods and perform control rod position criticality searches. The module is variably dimensioned so that calculations can be performed with any number of control rod banks each having any number of control rods. CTRLPOS can also calculate control rod worth curves for a single control rod or a bank of control rods. Control rod depletion can be calculated to provide radiation source terms. These radiation source terms can be used to predict radiation doses to personnel and estimate the shielding and long-term storage requirements for spent control rods. All of these operations are completely automated. The numerous features of the module are discussed in detail. The necessary input data for the CTRLPOS module is explained. Several sample problems are presented to show the flexibility of the module. The results presented with the sample problems show that the CTRLPOS module is a powerful tool which allows a wide variety of calculations to be easily performed.

  1. A genetic algorithm-based optimization model for pool boiling heat transfer on horizontal rod heaters at isolated bubble regime

    Science.gov (United States)

    Alavi Fazel, S. Ali

    2017-03-01

    A new optimized model which can predict the heat transfer in the nucleate boiling at isolated bubble regime is proposed for pool boiling on a horizontal rod heater. This model is developed based on the results of direct observations of the physical boiling phenomena. Boiling heat flux, wall temperature, bubble departing diameter, bubble generation frequency and bubble nucleation site density have been experimentally measured. Water and ethanol have been used as two different boiling fluids. Heating surface was made by several metals and various degrees of roughness. The mentioned model considers various mechanisms such as latent heat transfer due to micro-layer evaporation, transient conduction due to thermal boundary layer reformation, natural convection, heat transfer due to the sliding bubbles and bubble super-heating. The fractional contributions of individual mentioned heat transfer mechanisms have been calculated by genetic algorithm. The results show that at wall temperature difference more that about 3 K, bubble sliding transient conduction, non-sliding transient conduction, micro-layer evaporation, natural convection, radial forced convection and bubble super-heating have higher to lower fractional contributions respectively. The performance of the new optimized model has been verified by comparison of the existing experimental data.

  2. A genetic algorithm-based optimization model for pool boiling heat transfer on horizontal rod heaters at isolated bubble regime

    Science.gov (United States)

    Alavi Fazel, S. Ali

    2017-09-01

    A new optimized model which can predict the heat transfer in the nucleate boiling at isolated bubble regime is proposed for pool boiling on a horizontal rod heater. This model is developed based on the results of direct observations of the physical boiling phenomena. Boiling heat flux, wall temperature, bubble departing diameter, bubble generation frequency and bubble nucleation site density have been experimentally measured. Water and ethanol have been used as two different boiling fluids. Heating surface was made by several metals and various degrees of roughness. The mentioned model considers various mechanisms such as latent heat transfer due to micro-layer evaporation, transient conduction due to thermal boundary layer reformation, natural convection, heat transfer due to the sliding bubbles and bubble super-heating. The fractional contributions of individual mentioned heat transfer mechanisms have been calculated by genetic algorithm. The results show that at wall temperature difference more that about 3 K, bubble sliding transient conduction, non-sliding transient conduction, micro-layer evaporation, natural convection, radial forced convection and bubble super-heating have higher to lower fractional contributions respectively. The performance of the new optimized model has been verified by comparison of the existing experimental data.

  3. Results of automatic system implementation for the friction control rods execution in Cofrentes nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Curiel, M. [Logistica y Acondicionamientos Industriales SAU, Sorolla Center, local 10, Av. de las Cortes Valencianas, 46015 Valencia (Spain); Palomo, M. J. [ISIRYM, Universidad Politecnica de Valencia, Camino de Vera s/n, Valencia (Spain); Urrea, M. [Iberdrola Generacion S. A., Central Nuclear Cofrentes, Carretera Almansa Requena s/n, 04662 Cofrentes, Valencia (Spain); Arnaldos, A., E-mail: m.curiel@lainsa.co [TITANIA Servicios Tecnologicos SL, Sorolla Center, local 10, Av. de las Cortes Valencianas No. 58, 46015 Valencia (Spain)

    2010-10-15

    The purpose of this presentation is to show the obtained results in Cofrentes nuclear power plant (Spain) of control rods Pcc/24 friction test procedure. In order to perform this, a control rod friction test system has been developed. Principally, this system consists on software and data acquisition hardware that obtains and analyzes the control rod pressure variation on which the test is being made. The Pcc/24 procedure objective is to detect an excessive friction in the control rod movement that could cause a control rod drive movement slower than usual. This test is necessary every time that an anomalous alteration is produced in the reactor core that could affect to a fuel rod, and it is executed before the time measure of control rods rapid scram test of the affected rods. This test has to be carried out to all the reactor control rods and takes valuable time during plant refuelling. So, by means of an automatic system to perform the test, we obtain an important time saving during refuelling. On the other hand, the on-line monitoring of the control rod insertion and changes in differential pressure, permits a control rod operation fast and safe validation. Moreover, an automatic individual report of every rod is generated by the system and a final global result report of the entire test developed in refuelling is generated. The mentioned reports can be attached directly to the procedure documents obtaining an office data processing important saving time. (Author)

  4. Results of automatic system implementation for the friction control rods execution in Cofrentes nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Palomo, M., E-mail: mpalomo@iqn.upv.es [Universidad Politecnica de Valencia (UPV) (Spain); Urrea, M., E-mail: matias.urrea@iberdrola.es [Iberdrola Generacion S.A. Valencia (Spain). C.N. Cofrentes; Curiel, M., E-mail: m.curiel@lainsa.com [Logistica y Acondicionamientos Industriales (LAINSA), Valencia (Spain); Arnaldos, A., E-mail: a.arnaldos@titaniast.com [TITANIA Servicios Teconologicos, Valencia (Spain)

    2011-07-01

    The purpose of this presentation is to show the obtained results in Cofrentes Nuclear Power Plant (Spain) of Control Rods PCC/24 Friction Test Procedure. In order to perform this, a Control Rod Friction Test System has been developed. Principally, this system consists on software and data acquisition hardware that obtains and analyzes the control rod pressure variation on which the test is being made. The PCC/24 Procedure objective is to detect an excessive friction in the control rod movement that could cause a CRD (Control Rod Drive) movement slower than usual. This test is necessary every time that an anomalous alteration is produced in the reactor core that could affect to a fuel rod, and it is executed before the time measure of control rods rapid scram test of the affected rods. This test has to be carried out to all the reactor control rods and takes valuable time during plant refuelling. So, by means of an automatic system to perform the test, we obtain an important time saving during refuelling. On the other hand, the on-line monitoring of the control rod insertion and changes in differential pressure, permits a control rod operation fast and safe validation. Moreover, an automatic individual report of every rod is generated by the system and a final global result report of the entire test developed in refuelling is generated. The mentioned reports can be attached directly to the procedure documents obtaining an office data processing important saving time.(author)

  5. Control rod reactivity worth determination of a typical MTR research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Rizwan, M.; Raza, S.S.; Khan, R. [Pakistan Institute of Engineering and Applied Sciences (PIEAS), Islamabad (Pakistan). Dept. of Nuclear Engineering

    2015-10-15

    The safe and reliable utilization of research reactor demands the possible accurate information of control rod (CR) worths. The criticality positions of the control rods changes with time due to build up fission products. It is therefore important to determine the reactivity worth of control rods. The aim of this article is to estimate the reactivity worth of controls rods in the equilibrium core of a Materials Testing Reactor (MTR). A deterministic model of the reactor core was developed and confirmed against the reference results of excess reactivity, shutdown margin and combined control rod reactivity worth using the combination of WIMS/D4 and CITATION computer codes.

  6. Autonomous and FliK-dependent length control of the flagellar rod in Salmonella enterica.

    Science.gov (United States)

    Takahashi, Noriko; Mizuno, Shino; Hirano, Takanori; Chevance, Fabienne F V; Hughes, Kelly T; Aizawa, Shin-Ichi

    2009-10-01

    Salmonella flgG point mutations produce filamentous rod structures whose lengths are determined by FliK. FliK length variants produce rods with lengths proportional to the corresponding FliK molecular size, suggesting that FliK controls the length of not only the hook but also the rod by the same molecular mechanism.

  7. Autonomous and FliK-Dependent Length Control of the Flagellar Rod in Salmonella enterica▿

    Science.gov (United States)

    Takahashi, Noriko; Mizuno, Shino; Hirano, Takanori; Chevance, Fabienne F. V.; Hughes, Kelly T.; Aizawa, Shin-Ichi

    2009-01-01

    Salmonella flgG point mutations produce filamentous rod structures whose lengths are determined by FliK. FliK length variants produce rods with lengths proportional to the corresponding FliK molecular size, suggesting that FliK controls the length of not only the hook but also the rod by the same molecular mechanism. PMID:19666714

  8. Control rod drive WWER 1000 – tuning of input parameters

    Directory of Open Access Journals (Sweden)

    Markov P.

    2007-10-01

    Full Text Available The article picks up on the contributions presented at the conferences Computational Mechanics 2005 and 2006, in which a calculational model of an upgraded control rod linear stepping drive for the reactors WWER 1000 (LKP-M/3 was described and results of analysis of dynamical response of its individual parts when moving up- and downwards were included. The contribution deals with the tuning of input parameters of the 3rd generation drive with the objective of reaching its running as smooth as possible so as to get a minimum wear of its parts as a result and hence to achieve maximum life-time.

  9. PRODUCTION OF MC NYLON ROD USING HORIZONTAL CENTRIFUGAL CASTING TECHNIQUE%卧式离心浇铸法生产MC尼龙棒

    Institute of Scientific and Technical Information of China (English)

    曾上游; 林轩; 刘成

    2011-01-01

    在模具设计中,通过改变浇铸流道方向,设计制造出一系列不同规格的组合模具,开发了卧式离心浇铸法生产MC尼龙棒的工艺技术,制备了一系列不同规格的旋转棒,并对产品进行了分析测试.结果表明,采用卧式离心浇铸法生产MC尼龙棒是有效可行的,可完全消除MC尼龙棒材中的收缩孔和内部缺陷.卧式离心浇铸法具有生产效率高、产品质量好、成品率高、损耗量低、效益好等优点.%In the mold design, by changing the flow direction of casting, different specifications of combinations of die were designed and produced. The horizontal centrifugal casting technique was developed to produce MC nylon rod. A series of rotating rods were made, and products were analyzed. The results showed that the horizontal centrifugal casting technique to produce MC nylon rod was feasible and effective, could completely eliminate MC nylon shrink hole and internal defects. The horizontal centrifugal casting method had advantages of high production efficiency, good product quality, high yield, low loss, good benefits and so on.

  10. Conceptual Design of Bottom-mounted Control Rod Drive Mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jin Haeng; Kim, Sanghaun; Yoo, Yeonsik; Cho, Yeonggarp; Kim, Dongmin; Kim, Jong In [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-05-15

    The arrangement of the BMCRDMs and irradiation holes in the core is therefore easier than that of the top-mounted CRDM. Hence, many foreign research reactors, such as JRR-3M, JMTR, OPAL, and CARR, have adopted the BMCRDM concept. The purpose of this paper is to introduce the basic design concept on the BMCRDM. The major differences of the CRDMs between HANARO and KJRR are compared, and the design features and individual system of the BMCRDM for the KJRR are described. The Control Rod Drive Mechanism (CRDM) is a device to regulate the reactor power by changing the position of a Control Absorber Rod (CAR) and to shut down the reactor by fully inserting the CAR into the core within a specified time. The Bottom-Mounted CRDM (BMCRDM) for the KiJang Research Reactor (KJRR) is a quite different design concept compared to the top-mounted CRDM such as HANARO and JRTR. The main drive mechanism of the BMCRDM is located in a Reactivity Control Mechanism (RCM) room under the reactor pool bottom, which makes the interference with equipment in the reactor pool reduced.

  11. Analysis of High Temperature Reactor Control Rod Worth for the Initial and Full Core

    Science.gov (United States)

    Oktajianto, Hammam; Setiawati, Evi; Anam, Khoirul; Sugito, Heri

    2017-01-01

    Control rod is one important component in a nuclear reactor. In nuclear reactor operations the control rod functions to shut down the reactor. This research analyses ten control rods worth of HTR (High Temperature Reactor) at initial and full core. The HTR in this research adopts HTR-10 China and HTR- of pebble bed. Core calculations are performed by using MCNPX code after modelling the entire parts of core in condition of ten control rods fully withdrawn, all control rods in with 20 cm ranges of depth and the use of one control rod. Pebble bed and moderator balls are distributed in the core zone using a Body Centred Cubic (BCC) lattice by ratio of 57:43. The research results are obtained that the use of one control rod will decrease the reactor criticality of 2.04±0.12 %Δk/k at initial core and 1.57±0.10 %Δk/k at full core. The deeper control rods are in, the lesser criticality of reactor is with reactivity of ten control rods of 16.41±0.11 %Δk/k at initial core and 15.43±0.11 %Δk/k at full core. The results show that the use of ten control rods at full core will keep achieving subcritical condition even though the reactivity is smaller than reactivity at initial core.

  12. Decontamination of control rod housing from Palisades Nuclear Power Station.

    Energy Technology Data Exchange (ETDEWEB)

    Kaminski, M.D.; Nunez, L.; Purohit, A.

    1999-05-03

    Argonne National Laboratory has developed a novel decontamination solvent for removing oxide scales formed on ferrous metals typical of nuclear reactor piping. The decontamination process is based on the properties of the diphosphonic acids (specifically 1-hydroxyethane-1,1-diphosphonic acid or HEDPA) coupled with strong reducing-agents (e.g., sodium formaldehyde sulfoxylate, SFS, and hydroxylamine nitrate, HAN). To study this solvent further, ANL has solicited actual stainless steel piping material that has been recently removed from an operating nuclear reactor. On March 3, 1999 ANL received segments of control rod housing from Consumers Energy's Palisades Nuclear Plant (Covert, MI) containing radioactive contamination from both neutron activation and surface scale deposits. Palisades Power plant is a PWR type nuclear generating plant. A total of eight segments were received. These segments were from control rod housing that was in service for about 6.5 years. Of the eight pieces that were received two were chosen for our experimentation--small pieces labeled Piece A and Piece B. The wetted surfaces (with the reactor's pressurized water coolant/moderator) of the pieces were covered with as a scale that is best characterized visually as a smooth, shiny, adherent, and black/brown in color type oxide covering. This tenacious oxide could not be scratched or removed except by aggressive mechanical means (e.g., filing, cutting).

  13. Underwater characterization of control rods for waste disposal using SMOPY

    Energy Technology Data Exchange (ETDEWEB)

    Gallozzi-Ulmann, A.; Couturier, P.; Amgarou, K.; Rothan, D.; Menaa, N. [CANBERRA France,1 rue des Herons, 78182 ST Quentin Yvelines Cedex (France); Chard, P. [CANBERRA UK, Lower Dunbeath House, Forss Business Park, Thurso, Caithness KW14 7UZ (United Kingdom)

    2015-07-01

    Storage of spent fuel assemblies in cooling ponds requires careful control of the geometry and proximity of adjacent assemblies. Measurement of the fuel burnup makes it possible to optimise the storage arrangement of assemblies taking into account the effect of the burnup on the criticality safety margins ('burnup credit'). Canberra has developed a measurement system for underwater measurement of spent fuel assemblies. This system, known as 'SMOPY', performs burnup measurements based on gamma spectroscopy (collimated CZT detector) and neutron counting (fission chamber). The SMOPY system offers a robust and waterproof detection system as well as the needed capability of performing radiometric measurements in the harsh high dose - rate environments of the cooling ponds. The gamma spectroscopy functionality allows powerful characterization measurements to be performed, in addition to burnup measurement. Canberra has recently performed waste characterisation measurements at a Nuclear Power Plant. Waste activity assessment is important to control costs and risks of shipment and storage, to ensure that the activity level remains in the range allowed by the facility, and to declare activity data to authorities. This paper describes the methodology used for the SMOPY measurements and some preliminary results of a radiological characterisation of AIC control rods. After describing the features and normal operation of the SMOPY system, we describe the approach used for establishing an optimum control rod geometric scanning approach (optimum count time and speed) and the method of the gamma spectrometry measurements as well as neutron check measurements used to verify the absence of neutron sources in the waste. We discuss the results obtained including {sup 60}Co, {sup 110m}Ag and {sup 108m}Ag activity profiles (along the length of the control rods) and neutron results including Total Measurement Uncertainty evaluations. Full self-consistency checks were

  14. Horizontal

    Institute of Scientific and Technical Information of China (English)

    ZHONG; Chunping

    2005-01-01

    [1]Wu, H., Bochner technique in differential geometry, Advance in Math. (in Chinese), 1981, 10(1): 57-76.[2]Morrow, J., Kodaira, K., Complex Manifolds, New York: Holt, Rinehart & Winston, 1971.[3]Abate, M., Aikou, T., Patrizio, G., Preface for Complex Finsler Geometry, Cont. Math., Vol. 196, Providence,RI: Amer. Math. Soc., 1996, 97-100.[4]Abate, M., Patrizio, G., Finsler Metrics-A global approach with applications to geometric function theory,Lecture Notes in Mathematics, Vol. 1591, Bedin: Springer-Verlag, 1994.[5]Antonelli, P. L., Lackey, B.(eds.), The Theory of Finslerian Laplacians and Applications, MAIA 459, Dordrecht:Kluwer Academic Publishers, 1998.[6]Bao, D., Lackey, B., A Hodge decomposition theorem for Finsler spaces, C. R. Acad. Sci. Paris, t. 323, Serie 1,1996, 51-56.[7]Munteanu, O., Weitzenbock formulas for horizontal and vertical Laplacians, Houston Journal of Mathematics,2003, 29(4): 889-900.[8]Faran, J. J., The equivalence problem for complex Finsler Hamiltonians, Cont. Math.,Vol. 196, Providence, RI:Amer. Math. Soc., 1996, 133-144.[9]Kobayashi, S., Complex Finsler vector bundles, Cont. Math., Vol. 196, Providence, RI: Amer. Math. Soc.,1996,145-153.[10]Aikou, T., On complex Finsler manifolds, Rep. Fac. Sci. Kagoshima Univ. (Math. Phys. & Chem.), 1991, 24:9-25.

  15. The Interaction Between Control Rods as Estimated by Second-Order One-Group Perturbation Theory

    Energy Technology Data Exchange (ETDEWEB)

    Persson, Rolf

    1966-10-15

    The interaction effect between control rods is an important problem for the reactivity control of a reactor. The approach of second order one-group perturbation theory is shown to be attractive due to its simplicity. Formulas are derived for the fully inserted control rods in a bare reactor. For a single rod we introduce a correction parameter b, which with good approximation is proportional to the strength of the absorber. For two and more rods we introduce an interaction function g(r{sub ij}), which is assumed to depend only on the distance r{sub ij} between the rods. The theoretical expressions are correlated with the results of several experiments in R0, ZEBRA and the Aagesta reactor, as well as with more sophisticated calculations. The approximate formulas are found to give quite good agreement with exact values, but in the case of about 8 or more rods higher-order effects are likely to be important.

  16. Analytical estimation of control rod shadowing effect for excess reactivity measurement of High Temperature Engineering Test Reactor (HTTR)

    Energy Technology Data Exchange (ETDEWEB)

    Nakano, Masaaki; Yamashita, Kiyonobu; Fujimoto, Nozomu; Nojiri, Naoki; Takeuchi, Mitsuo; Fujisaki, Shingo [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Tokuhara, Kazumi; Nakata, Tetsuo

    1998-05-01

    The control rod shadowing effect has been estimated analytically in application of the fuel addition method to excess reactivity measurement of High Temperature Engineering Test Reactor (HTTR). The movements of control rods in the procedure of the fuel addition method have been simulated in the analysis. The calculated excess reactivity obtained by the simulation depends on the combinations of measuring control rods and compensating control rods and varies from -10% to +50% in comparison with the excess reactivity calculated from the effective multiplication factor of the core where all control rods are fully withdrawn. The control rod shadowing effect is reduced by the use of plural number of measuring and compensation control rods because of the reduction in neutron flux deformation in the measuring procedure. As a result, following combinations of control rods are recommended; 1) Thirteen control rods of the center, first, and second rings will be used for the reactivity measurement. The reactivity of each control rod is measured by the use of the other twelve control rods for reactivity compensation. 2) Six control rods of the first ring will be used for the reactivity measurement. The reactivity of each control rod is measured by the use of the other five control rods for reactivity compensation. (author)

  17. Analysis of Dynamic Insertion of Control Rod of BWR under Seismic Excitation

    Science.gov (United States)

    Koide, Yuichi; Nakagawa, Masaki; Fukushi, Naoki; Ishigaki, Hirokuni; Okumura, Kazue

    The dynamic characteristics of control rod for boiling water reactor being inserted under seismic excitation were investigated using non-linear analytical models. The capability of managing the insertion of control rod is one of the most important factors affecting the safety of nuclear power plant undergoing seismic events. Predicting the behavior of control rod being inserted during earthquakes is important when designing how rod should be controlled during seismic events. We developed analytical models using the finite element method (FEM). The effect of the interaction force between the control rod and the fuel assemblies is considered in non-linear analysis. This interaction force causes resistance force to be applied to the control rod when they are being inserted. The validity of the analytical models was confirmed by comparing the analytical results with the experimental ones. The effects of input seismic motion and structural parameters on the insertion time ware investigated using the analytical models. These analytical methods can be used to predict the time to insert the control rod into the core region of reactor, and are useful for designing control rod system that can survive seismic events.

  18. Bottom-mounted control rod drive mechanism for KJRR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jin Haeng; Kim, Sanghaun; Yoo, Yeon-Sik, E-mail: yooys@kaeri.re.kr; Cho, Yeong-Garp; Huh, Hyung; Lee, Hyokwang; Sun, Jong-Oh; Ryu, Jeong-Soo

    2016-04-15

    Highlights: • The basic design features and characteristics of the KJRR BMCRDM are described. • The similarities and differences of some research reactor CRDMs are compared. • The current status of the design and development of the CRDM is described. • The future plan of the qualification tests of the CRDM is summarized. - Abstract: The KIJANG research reactor (KJRR), which is currently being designed by Korea Atomic Energy Research Institute, is a pool type research reactor with 15 MW of thermal power. Contrary to the top-mounted control rod drive mechanism (CRDM), the main drive mechanism of the KJRR CRDM is located in a reactivity control mechanism room under the reactor pool bottom. Recently, we accomplished the design and development of a prototype CRDM. In this paper, we introduce the basic design concept of the bottom-mounted CRDM for KJRR, and compare the similarities and differences of some research reactor CRDMs. The current status of the prototype CRDM development based on a finite element analysis and experimental verification, and the future plan of the CRDM qualification tests, are both described.

  19. Study for identification of control rod drops in PWR reactors at any burnup step

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Thiago J.; Martinez, Aquilino S.; Medeiros, Jose A.C.C.; Goncalves, Alessandro C., E-mail: tsouza@nuclear.ufrj.br, E-mail: aquilino@lmp.ufrj.br, E-mail: canedo@lmp.ufrj.br, E-mail: alessandro@nuclear.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), RJ (Brazil). Programa de Engenharia Nuclear; Palma, Daniel A.P., E-mail: dapalma@cnen.gov.br [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)

    2013-07-01

    The control rod drop event in PWR reactors induces an unsafe operating condition. Therefore, in a scenario of a control rod drop is important to quickly identify the rod to minimize undesirable effects. The objective of this work is to develop an on-line method for identification of control rod drop in PWR reactors. The method consists on the construction of a tool that is based on the ex-core detector responses. Therefore, it is proposed to recognize patterns in the neutron ex-core detectors responses and thus to identify on-line a control rod drop in the core during the reactor operation. The results of the study, as well as the behavior of the detector responses, demonstrated the feasibility of this method. (author)

  20. Diurnal control of rod function in the chicken.

    Science.gov (United States)

    Schaeffel, F; Rohrer, B; Lemmer, T; Zrenner, E

    1991-06-01

    We studied rod function in the chicken by recording corneal electroretinograms (ERGs). The following experiments were performed to demonstrate rod function during daytime: (1) determining the dark-adaptation function; (2) measuring the spectral sensitivity by a a-b-wave amplitude criterion in response to monochromatic flickering light of different frequencies ranging from 6.5-40.8 Hz (duty cycle 1:1); (3) analyzing the response vs. log stimulus intensity (V-log I) function in order to reveal a possible two phase process; and (4) determining the spectral sensitivity function either in a non-dark adapted state or after dark adaptation of the animals for 1 and 24 h. None of these experiments demonstrated clear evidence of rod function during daytime. On the other hand, we found rods histologically by light- and electron microscopy. Therefore, we repeated our ERG recordings during the night (between midnight and 3:00 A.M.). Without previous dark adaptation, rod function could be seen immediately in the same experiments described above. The result shows that, in the chicken, rods are turned on endogenously during the night but are scarcely functional during the day.

  1. Nonlinear Magnetic Circuit Analysis of SMART Control Rod Drive Actuator

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Myounggyu; Gi, Myung Ju; Kim, Myounggon; Park, Youngwoo [Chungnam Nat' l Univ., Daejeon (Korea, Republic of); Lee, Jaeseon; Kim, Jongwook [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    In this paper, we derive a nonlinear magnetic circuit model of an electromagnetic control-rod actuator in the SMART. The results of the nonlinear model are compared with those by linear circuit model and finite-element analyses. gnetic circuit modeling is a useful tool when designing an electromagnetic actuator, as it allows fast calculations and enables parametric studies. It is particularly essential when the actuator is to be used in a very complex system such as a nuclear reactor. Important design parameters must be identified at the early stage of the design process. Once the design space is narrowed down, more accurate methods such finite-element analyses (FEA) can be employed for detailed design. Magnetic circuit modeling is based on the assumption that a flux path consists of sections in each of which field quantities are constant with linear constitutive relations. This assumption fails to hold when portions of the flux path become saturated. The magnetic circuit must be modified in order to accurately describe the nonlinear behavior of saturation.

  2. Conceptual study of reactor control and shutdown rod drive mechanism of a SFR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Han; Kim, Jong Bum

    2012-09-15

    The conceptual design of a prototype SFR (sodium cooled Fast Reactor) of 150MWe capacity was began in 2012 through the Korea national long term R and D project by KAERI. This report describes the design concepts of a control rod drive mechanism for plant control system and a passive shutdown rod drive mechanism for reactor protection system of a SFR. The performance requirements and preliminary design values of the core power control rod drive mechanism are determined based on the KALIMER 600 and PRISM design concepts. As for the scram rod drive mechanism, several types of passive shutdown systems are introduced, several candidate design concepts are proposed and the reactor shutdown rod drive mechanism is described shortly. This report also performs the parametric design studies for the electromagnet component of the passive shutdown device. Its design feasibility is investigated for a given design installation constraint, and the necessary items for design improvements to meet the design requirements are suggested.

  3. Model predictive load following control for APR+ reactors through discrete control rod speed optimization

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Hwan; Kim, Ju Hyun; Park, Sun Ho; Yoo, Kwae Hwan; Kim, Dae Seop; Na, Man Gyun [Chosun Univ., Gwanggu (Korea, Republic of)

    2012-10-15

    Until now, nuclear power has been only used for the base load power operation. However, current nuclear power plants are recognized as the most reasonable energy source. As a result, the proportion of nuclear power has being grown increasingly. Therefore, load following operation of a nuclear power plant should be an essential option. Most of the existing nuclear power plants perform reactor operation by varying the boron concentration in the coolant. But it is hard to respond quickly to demands for the power changes. In case of using the control rods, reactivity control is easy, but axial power distribution control is very hard because it has very complex and nonlinear dynamic characteristics. In this study, we have introduced a Model Predictive Control (MPC) method to control the average coolant temperature and Axial Shape Index (ASI) automatically at the same time, and we have improved the performance of controller by applying the Genetic Algorithm (GA) to optimize the control rod movement.

  4. Ultrasound control of magnet growing rod distraction in early onset scoliosis.

    Science.gov (United States)

    Pérez Cervera, T; Lirola Criado, J F; Farrington Rueda, D M

    2016-01-01

    The growing rod technique is currently one of the most common procedures used in the management of early onset scoliosis. However, in order to preserve spine growth and control the deformity it requires frequent surgeries to distract the rods. Magnetically driven growing rods have recently been introduced with same treatment goal, but without the inconvenience of repeated surgical distractions. One of the limitations of this technical advance is an increase in radiation exposure due to the increase in distraction frequency compared to conventional growing rods. An improvement of the original technique is presented, proposing a solution to the inconvenience of multiple radiation exposure using ultrasound technology to control the distraction process of magnetically driven growing rods.

  5. Final Report: Contractor Readiness Assessment (CRA) for TREAT Fuel Movement and Control Rod Drives Isolation

    Energy Technology Data Exchange (ETDEWEB)

    Rowsell, David Leon [Idaho National Laboratory (INL), Idaho Falls, ID (United States)

    2015-06-01

    This report documents the Contractor Readiness Assessment (CRA) for TREAT Fuel Movement and Control Rod Drives Isolation. The review followed the approved Plan of Action (POA) and Implementation Plan (IP) using the identified core requirements. The activity was limited scope focusing on the control rod drives functional isolation and fuel element movement. The purpose of this review is to ensure the facility's readiness to move fuel elements thus supporting inspection and functionally isolate the control rod drives to maintain the required shutdown margin.

  6. Core Quadrant Power Tilt Induced by Control Rods Axial Position Mismatch

    Energy Technology Data Exchange (ETDEWEB)

    Son, Seungbeom; Lee, Changhee; Woo, Haeseuk; Jung, Yilsup [KEPCO Nuclear Fuel, Daejeon (Korea, Republic of); Kim, Yonghee [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2014-05-15

    If the limits are not met, plant operation should be restricted at various conditions. Actually, core quadrant power tilt in many nuclear power plants has been occurred frequently. This study deals with the various general causes of the core quadrant power tilt, including the control rods axial position mismatch induced quadrant power tilt problem. Based on the simulation results in each control rods axial position mismatch in a same control bank, it was found that some control rods axial position mismatch (simply around 10 steps difference) can induce quadrant power tilt relatively high (around 1.5%). With the other causes induced QPT, it may exceed the technical specification limit (2%). So it is needed to drive the control rods in detail during the operation including power change mode.

  7. Controlling growth of ZnO rods by polyvinylpyrrolidone (PVP) and their optical properties

    Science.gov (United States)

    Wei, S. F.; Lian, J. S.; Jiang, Q.

    2009-05-01

    ZnO rods with different morphologies were synthesized through a wet chemical method by addition of polyvinylpyrrolidone (PVP). By adjusting the concentration of the additive in the growth solution, we can control the diameter, ratio of length to diameter and density of ZnO rods. FESEM images showed that the rods in nanoscale could be obtained at the polyvinylpyrrolidone concentration of 1.0 mM. Meanwhile, the resonant Raman scattering and photoluminescence spectra showed that the crystalline quality and the optical property of ZnO rods were improved through moderate addition of polyvinylpyrrolidone (concentration of 1.0 mM) in the growth solution. In addition, the possible mechanism of the PVP effect on the growth of ZnO rods was discussed based on the FT-IR spectra.

  8. Effect of External Forced Flow and Boiling Film on Heat Transfer of AISI 4140 Steel Horizontal Rod During Direct Quenching%Effect of External Forced Flow and Boiling Film on Heat Transfer of AISI 4140 Steel Horizontal Rod During Direct Quenching

    Institute of Scientific and Technical Information of China (English)

    A H Meysami; R Ghasemzadeh; S H Seyedein; M R Aboutalebi

    2011-01-01

    The effects of rod falling and moving, external flow field, boiling film and radiation were investigated on fluid flow and heat transfer of AISI 4140 steel horizontal rod during direct quenching by mathematical modeling. The flow field and heat transfer in quenching tank were simulated by computational fluid dynamics (CFD) method considering falling and moving of rods during process. Therefore, modeling of flow field was done by a fixed-mesh method for general moving objects equations, and then, energy equation was solved with a numerical approach so that effeet of boiling film heat flux was considered as a source term in energy equation for solid-liquid boundary. Simulated results were verified by comparing with published and experimental data and there was a good agreement between them. Also, the effects of external forced flow and film boiling were investigated on heat flux output, temperature distribution and heat transfer coefficient of rod. Also simulated results determined optimum quenching time for this process.

  9. Full 3D translational and rotational optical control of multiple rod-shaped bacteria.

    Science.gov (United States)

    Hörner, Florian; Woerdemann, Mike; Müller, Stephanie; Maier, Berenike; Denz, Cornelia

    2010-07-01

    The class of rod-shaped bacteria is an important example of non-spherical objects where defined alignment is desired for the observation of intracellular processes or studies of the flagella. However, all available methods for orientational control of rod-shaped bacteria are either limited with respect to the accessible rotational axes or feasible angles or restricted to one single bacterium. In this paper we demonstrate a scheme to orientate rod-shaped bacteria with holographic optical tweezers (HOT) in any direction. While these bacteria have a strong preference to align along the direction of the incident laser beam, our scheme provides for the first time full rotational control of multiple bacteria with respect to any arbitrary axis. In combination with the translational control HOT inherently provide, this enables full control of all three translational and the two important rotational degrees of freedom of multiple rod-shaped bacteria and allows one to arrange them in any desired configuration.

  10. Validation of neutron flux redistribution factors in JSI TRIGA reactor due to control rod movements.

    Science.gov (United States)

    Kaiba, Tanja; Žerovnik, Gašper; Jazbec, Anže; Štancar, Žiga; Barbot, Loïc; Fourmentel, Damien; Snoj, Luka

    2015-10-01

    For efficient utilization of research reactors, such as TRIGA Mark II reactor in Ljubljana, it is important to know neutron flux distribution in the reactor as accurately as possible. The focus of this study is on the neutron flux redistributions due to control rod movements. For analyzing neutron flux redistributions, Monte Carlo calculations of fission rate distributions with the JSI TRIGA reactor model at different control rod configurations have been performed. Sensitivity of the detector response due to control rod movement have been studied. Optimal radial and axial positions of the detector have been determined. Measurements of the axial neutron flux distribution using the CEA manufactured fission chambers have been performed. The experiments at different control rod positions were conducted and compared with the MCNP calculations for a fixed detector axial position. In the future, simultaneous on-line measurements with multiple fission chambers will be performed inside the reactor core for a more accurate on-line power monitoring system.

  11. Sample Federal Facility Land Use Control ROD Checklist and Suggested Language (LUC Checklist)

    Science.gov (United States)

    The LUC Checklist provides direction on describing and documenting land use controls (LUCs) in federal facility actrions under CERCLA in Records of Decision (RODs), remedial designs (RDs), and remedial action work plans (RAWPs).

  12. Preliminary Drop Time Analysis of a Control Rod Using CFD Code

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Myoung Hwan; Park, Jin Seok; Lee, Won Jae [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Jun Hong [SEST Co., Seoul (Korea, Republic of)

    2010-05-15

    A control rod drive mechanism (CRDM) is a reactor regulating system, which can insert and withdraw a control rod containing a neutron absorbing material to control the reactivity of the reactor core. The latch type CRDM for the SMART (System-integrated Modular Advanced ReacTor) is going to be used. The drop time of the control rod in the design stage is one of important parameters for a safety analysis of the reactor. When the control rod is falling down into the core, it is retarded by various forces acting on it such as fluid resistance buoyancy and mechanical friction caused by contacting the inner surface of the guide thimble, etc.. However, complicated coupling of the various forces makes it difficult to predict the drop behavior. This paper describes the development of the 3D CFD analysis model using a FLUENT code. The single control rod of the Westinghouse 17x17 type optimized fuel assembly (W-OFA) was considered for the verification of the CFD model. A preliminary drop time analysis for the SMART with the simulated control rod was performed

  13. A hybrid attitude controller consisting of electromagnetic torque rods and an active fluid ring

    Science.gov (United States)

    Nobari, Nona A.; Misra, Arun K.

    2014-01-01

    In this paper, a novel hybrid actuation system for satellite attitude stabilization is proposed along with its feasibility analysis. The system considered consists of two magnetic torque rods and one fluid ring to produce the control torque required in the direction in which magnetic torque rods cannot produce torque. A mathematical model of the system dynamics is derived first. Then a controller is developed to stabilize the attitude angles of a satellite equipped with the abovementioned set of actuators. The effect of failure of the fluid ring or a magnetic torque rod is examined as well. It is noted that the case of failure of the magnetic torque rod whose torque is along the pitch axis is the most critical, since the coupling between the roll or yaw motion and the pitch motion is quite weak. The simulation results show that the control system proposed is quite fault tolerant.

  14. Control of vortex breakdown in a closed cylinder with a small rotating rod

    Science.gov (United States)

    Lo Jacono, D.; Sørensen, J. N.; Thompson, M. C.; Hourigan, K.

    2008-11-01

    Effective control of vortex breakdown in a cylinder with a rotating lid was achieved with small rotating rods positioned on the stationary lid. After validation with accurate measurements using a novel stereoscopic particle image velocimetry (SPIV) technique, analysis of numerical simulations using a high-order spectral element method has been undertaken. The effect of a finite length rod creates additional source terms of vorticity as the rod rotates. These additional source terms and their spatial locations influence the occurrence of the vortex breakdown.

  15. Control of vortex breakdown in a closed cylinder with a small rotating rod

    DEFF Research Database (Denmark)

    Lo Jacono, D.; Sørensen, Jens Nørkær; Thompson, M.C.

    2008-01-01

    Effective control of vortex breakdown in a cylinder with a rotating lid was achieved with small rotating rods positioned on the stationary lid. After validation with accurate measurements using a novel stereoscopic particle image velocimetry (SPIV) technique, analysis of numerical simulations using...... a high-order spectral element method has been undertaken. The effect of a finite length rod creates additional source terms of vorticity as the rod rotates. These additional source terms and their spatial locations influence the occurrence of the vortex breakdown....

  16. Full Scale Component Test Facility KOPRA - Qualification Test of EPR Control Rod Drive Mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Sykora, Alexander; Herr, Wolfgang [AREVA NP GmbH, P.O. Box 3220, 91050 Erlangen (Germany); Champomier, Francois [AREVA NP SAS, Tour AREVA - Cedex 16, 92084 Paris-La Defense (France)

    2008-07-01

    The test facility KOPRA is designed for full scale-tests on nuclear components under operational conditions. One part of it is the component test loop for developing and qualifying nuclear core components respecting temperature, pressure and mass flow of pressurized water reactor conditions. The KOPRA test facility and its measuring equipment is presented through qualification tests for the control rod drive mechanism and the control rod drive line of the new European Pressurized Water Reactor (EPR). The control rod drive mechanism qualification test program is split into three different test phases. At first, performance tests are conducted to verify the adequate performance of the new equipment, e.g. measurement of rod cluster control assembly drop time under different thermal hydraulic conditions, impact velocity of drive rod on CRDM latch tips and drive rod acceleration during stepping operation by means of strain gauges or through direct measurement. After these functional tests follow the stability tests to ensure that proper functioning is reliably achieved over an appreciable amount of time and the endurance tests to quantify the amount of time and/or the number of steps during which no appreciable wear, that could possibly alter the correct behaviour, is to be expected. (authors)

  17. Controlling dielectric and pyroelectric properties of compositionally graded ferroelectric rods by an applied pressure

    Science.gov (United States)

    Zheng, Yue; Woo, C. H.; Wang, Biao

    2007-06-01

    The polarization, charge offset, dielectric, and pyroelectric properties of a compositionally graded ferroelectric rod inside a high-pressure polyethylene tube are studied using a thermodynamic model based on the Landau-Ginzburg-Devonshire formulation. The calculated distribution of the polarization in the rod is nonuniform, and the corresponding charge offset, dielectric, and pyroelectric properties vary according to the applied pressure. This behavior may be used as a convenient means to control these properties for design optimization.

  18. Aerosol behavior during SIC control rod failure in QUENCH-13 test

    Energy Technology Data Exchange (ETDEWEB)

    Lind, Terttaliisa, E-mail: terttaliisa.lind@psi.c [Paul Scherrer Institut, Villigen (Switzerland); Csordas, Anna Pinter; Nagy, Imre [HAS KFKI Atomic Energy Research Institute, Budapest (Hungary); Stuckert, Juri [Forschungszentrum Karlsruhe, Karlsruhe (Germany)

    2010-02-15

    In a nuclear reactor severe accident, radioactive fission products as well as structural materials are released from the core by evaporation, and the released gases form particles by nucleation and condensation. In addition, aerosol particles may be generated by droplet formation and fragmentation of the core. In pressurized water reactors (PWR), a commonly used control rod material is silver-indium-cadmium (SIC) covered with stainless steel cladding. The control rod elements, Cd, In and Ag, have relatively low melting temperatures, and especially Cd has also a very low boiling point. Control rods are likely to fail early on in the accident due to melting of the stainless steel cladding which can be accelerated by eutectic interaction between stainless steel and the surrounding Zircaloy guide tube. The release of the control rod materials would follow the cladding failure thus affecting aerosol source term as well as fuel rod degradation. The QUENCH experimental program at Forschungszentrum Karlsruhe investigates phenomena associated with reflood of a degrading core under postulated severe accident conditions. QUENCH-13 test was the first in this program to include a silver-indium-cadmium control rod of prototypic PWR design. To characterize the extent of aerosol release during the control rod failure, aerosol particle size distribution and concentration measurements in the off-gas pipe of the QUENCH facility were carried out. For the first time, it was possible to determine on-line the aerosol concentration and size distribution released from the core. These results are of prime importance for model development for the proper calculation of the source term resulting from control rod failure. The on-line measurement showed that the main aerosol release started at the bundle temperature maximum of T approx 1570 K at hottest bundle elevation. A very large burst of aerosols was detected 660 s later at the bundle temperature maximum of T approx 1650 K, followed by a

  19. Aerosol behavior during SIC control rod failure in QUENCH-13 test

    Science.gov (United States)

    Lind, Terttaliisa; Csordás, Anna Pintér; Nagy, Imre; Stuckert, Juri

    2010-02-01

    In a nuclear reactor severe accident, radioactive fission products as well as structural materials are released from the core by evaporation, and the released gases form particles by nucleation and condensation. In addition, aerosol particles may be generated by droplet formation and fragmentation of the core. In pressurized water reactors (PWR), a commonly used control rod material is silver-indium-cadmium (SIC) covered with stainless steel cladding. The control rod elements, Cd, In and Ag, have relatively low melting temperatures, and especially Cd has also a very low boiling point. Control rods are likely to fail early on in the accident due to melting of the stainless steel cladding which can be accelerated by eutectic interaction between stainless steel and the surrounding Zircaloy guide tube. The release of the control rod materials would follow the cladding failure thus affecting aerosol source term as well as fuel rod degradation. The QUENCH experimental program at Forschungszentrum Karlsruhe investigates phenomena associated with reflood of a degrading core under postulated severe accident conditions. QUENCH-13 test was the first in this program to include a silver-indium-cadmium control rod of prototypic PWR design. To characterize the extent of aerosol release during the control rod failure, aerosol particle size distribution and concentration measurements in the off-gas pipe of the QUENCH facility were carried out. For the first time, it was possible to determine on-line the aerosol concentration and size distribution released from the core. These results are of prime importance for model development for the proper calculation of the source term resulting from control rod failure. The on-line measurement showed that the main aerosol release started at the bundle temperature maximum of T ˜ 1570 K at hottest bundle elevation. A very large burst of aerosols was detected 660 s later at the bundle temperature maximum of T ˜ 1650 K, followed by a relatively

  20. On-line monitoring of control rod integrity in BWRs using a mass spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, I., E-mail: irina@nephy.chalmers.se [Chalmers University of Technology, SE-412 96 Gothenburg (Sweden); Loner, H.; Ammon, K. [Kernkraftwerk Leibstadt, CH-5325 Leibstadt (Switzerland); Sihver, L. [Chalmers University of Technology, SE-412 96 Gothenburg (Sweden); Ledergerber, G. [Kernkraftwerk Leibstadt, CH-5325 Leibstadt (Switzerland)

    2013-01-11

    Surveillance of fuel and control rod integrity in the core of a boiling water reactor is essential for maintaining a safe and reliable operation. Control rods of a boiling water reactor are mainly filled with boron carbide as a neutron absorber. Due to the irradiation of boron with neutrons, a continuous production of lithium and helium will occur inside a control rod. Most of the created helium will be retained in the boron carbide lattice; however a small part will escape into the void volume of the control blade. Therefore the integrity of control rods during operation can efficiently be followed by on-line measurements of helium concentration in the reactor off-gas system using a mass spectrometer. Since helium is a fill gas in fuel rods, the same method is a useful early warning system for primary fuel failures. In this paper, we introduce an on-line helium detector system which is installed at the nuclear power plant in Leibstadt. Furthermore the measuring experiences of control rod failure detection at the plant are presented. Different causes of increased helium levels in the off-gas system have been distinguished. There are spontaneous helium releases as well as helium releases caused by changed conditions in the reactor (power reduction, control rod movement, etc.). Helium peaks can also be characterized according to the released amount of helium, the peak shape and the duration of the release, which leads to different interpretations of the release mechanisms. In addition, the measured amount of released helium from a 50 days period (280 l) is also compared to the calculated amount of produced helium from the washed out boron during the same time period (190 l).

  1. On-line monitoring of control rod integrity in BWRs using a mass spectrometer

    Science.gov (United States)

    Larsson, I.; Loner, H.; Ammon, K.; Sihver, L.; Ledergerber, G.

    2013-01-01

    Surveillance of fuel and control rod integrity in the core of a boiling water reactor is essential for maintaining a safe and reliable operation. Control rods of a boiling water reactor are mainly filled with boron carbide as a neutron absorber. Due to the irradiation of boron with neutrons, a continuous production of lithium and helium will occur inside a control rod. Most of the created helium will be retained in the boron carbide lattice; however a small part will escape into the void volume of the control blade. Therefore the integrity of control rods during operation can efficiently be followed by on-line measurements of helium concentration in the reactor off-gas system using a mass spectrometer. Since helium is a fill gas in fuel rods, the same method is a useful early warning system for primary fuel failures. In this paper, we introduce an on-line helium detector system which is installed at the nuclear power plant in Leibstadt. Furthermore the measuring experiences of control rod failure detection at the plant are presented. Different causes of increased helium levels in the off-gas system have been distinguished. There are spontaneous helium releases as well as helium releases caused by changed conditions in the reactor (power reduction, control rod movement, etc.). Helium peaks can also be characterized according to the released amount of helium, the peak shape and the duration of the release, which leads to different interpretations of the release mechanisms. In addition, the measured amount of released helium from a 50 days period (280 l) is also compared to the calculated amount of produced helium from the washed out boron during the same time period (190 l).

  2. Application of hafnium hydride control rod to large sodium cooled fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ikeda, Kazumi, E-mail: kazumi_ikeda@mfbr.mhi.co.jp [Mitsubishi FBR Systems, Inc., 34-17, Jingumae 2-Chome, Shibuya-ku, Tokyo 150-0001 (Japan); Moriwaki, Hiroyuki, E-mail: hiroyuki_moriwaki@mfbr.mhi.co.jp [Mitsubishi FBR Systems, Inc., 34-17, Jingumae 2-Chome, Shibuya-ku, Tokyo 150-0001 (Japan); Ohkubo, Yoshiyuki, E-mail: yoshiyuki_okubo@mfbr.mhi.co.jp [Mitsubishi FBR Systems, Inc., 34-17, Jingumae 2-Chome, Shibuya-ku, Tokyo 150-0001 (Japan); Iwasaki, Tomohiko, E-mail: tomohiko.iwasaki@qse.tohoku.ac.jp [Department of Quantum Science and Energy Engineering, Tohoku University, Aoba, Aramaki, Aoba-ku, Sendai-shi, Miyagi-ken 980-8579 (Japan); Konashi, Kenji, E-mail: konashi@imr.tohoku.ac.jp [Institute for Materials Research, Tohoku University, Narita-cho, Oarai-machi, Higashi-Ibaraki-gun, Ibaraki-ken 311-1313 (Japan)

    2014-10-15

    Highlights: • Application of hafnium hydride control rod to large sodium cooled fast breeder reactor. • This paper treats application of an innovative hafnium hydride control rod to a large sodium cooled fast breeder reactor. • Hydrogen absorption triples the reactivity worth by neutron spectrum shift at H/Hf ratio of 1.3. • Lifetime of the control rod quadruples because produced daughters of hafnium isotopes are absorbers. • Nuclear and thermal hydraulic characteristics of the reactor are as good as or better than B-10 enriched boron carbide. - Abstract: This study treats the feasibility of long-lived hafnium hydride control rod in a large sodium-cooled fast breeder reactor by nuclear and thermal analyses. According to the nuclear calculations, it is found that hydrogen absorption of hafnium triples the reactivity by the neutron spectrum shift at the H/Hf ratio of 1.3, and a hafnium transmutation mechanism that produced daughters are absorbers quadruples the lifetime due to a low incineration rate of absorbing nuclides under irradiation. That is to say, the control rod can function well for a long time because an irradiation of 2400 EFPD reduces the reactivity by only 4%. The calculation also reveals that the hafnium hydride control rod can apply to the reactor in that nuclear and thermal characteristics become as good as or better than 80% B-10 enriched boron carbide. For example, the maximum linear heat rate becomes 3% lower. Owing to the better power distribution, the required flow rate decreases approximately by 1%. Consequently, it is concluded on desk analyses that the long lived hafnium hydride control rod is feasible in the large sodium-cooled fast breeder reactor.

  3. Performance estimation of control rod position indicator due to aging of magnet

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Je Yong; Kim, Ji Ho; Huh, Hyung; Choi, Myoung Hwan; Sohn, Dong Seong [KAERI, Daejeon (Korea, Republic of)

    2009-07-01

    The Control Element Drive Mechanism (CEDM) for the integral reactor is designed to raise and lower the control rod in steps of 2mm in order to satisfy the design features of the integral reactor which are the soluble boron free operation and the use of a nuclear heating for the reactor start-up. The actual position of the control rod could be achieved to sense the magnet connected to the control rod by the position indicator around the upper pressure housing of CEDM. It is sufficient that the actual position information of control rod at 20mm interval from the position indicator is used for the core safety analysis. As the magnet moves upward along the position indicator assembly from the bottom to the top in the upper pressure housing, the output voltage increases linearly step-wise at 0.2VDC increments. Between every step there are transient areas which occur by a contact closing of three reed switches which is the 2-3-2 contact closing sequence. In this paper the output voltage signal corresponding to the position of control rod was estimated on the 2-1-2 contact closing sequence due to the aging of the magnet.

  4. Development of passive-controlled HUB (teetered brake & damper mechanism) of horizontal axis wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Yukimaru; Kamada, Yasunari; Maeda, Takao [Mie Univ. (Japan)

    1997-12-31

    For the purpose of the improvement of reliability of the Mega-Watt wind turbine, this paper indicates the development of an original mechanism for the passive-controlled hub, which has the effects of braking and damping on aerodynamic forces. This mechanism is useful for variable speed control of the large wind turbine. The passive-controlled hub is the combination of two mechanisms. One is the passive-teetered and damping mechanism, and the other is the passive-variable-pitch mechanism. These mechanism are carried out by the combination of the teetering and feathering motions. When the wind speed exceeds the rated wind speed, the blade is passively teetered in a downwind direction and, simultaneously, a feathering mechanism, which is linked to the teetering mechanism through a connecting rods, is activated. Testing of the model horizontal axis wind turbine in a wind tunnel showed that the passive-controlled hub mechanism can suppress the over-rotational speed of the rotor. By the application of the passive-controlled hub mechanism, the maximum rotor speed is reduced to about 60%.

  5. Estimation of Control Rod Worth in a VVER-1000 Reactor using DRAGON4 and DONJON4

    Directory of Open Access Journals (Sweden)

    Saadatian-derakhshandeh Farahnaz

    2014-07-01

    Full Text Available One of the main issues in safety and control systems design of power and research reactors is to prevent accidents or reduce the imposed hazard. Control rod worth plays an important role in safety and control of reactors. In this paper, we developed a justifiable approach called D4D4 to estimate the control rod worth of a VVER-1000 reactor that enables to perform the best estimate analysis and reduce the conservatism that utilize DRAGON4 and DONJON4. The results are compared with WIMS-D4/CITATION to show the effectiveness and superiority of the developed package in predicting reactivity worth of the rod and also other reactor physics parameters of the VVER-1000 reactor. The results of this study are in good agreement with the plant's FSAR.

  6. Control of Ca2+ in rod outer segment disks by light and cyclic GMP.

    Science.gov (United States)

    George, J S; Hagins, W A

    1983-05-26

    Photons absorbed in vertebrate rods and cones probably cause electrochemical changes at the photoreceptor plasma membrane by changing the cytoplasmic concentration of a diffusible transmitter substance, reducing the Na+ current flowing into the outer segment of the cell in the dark, to produce the observed membrane hyperpolarization that is the initial excitatory response. Cyclic GMP has been proposed as the transmitter because a light-activated cyclic GMP phosphodiesterase (PDE) has been found in rod disk membranes and because intracellularly injected cyclic GMP reduces rod membrane potentials. Free Ca2+ has also been proposed because increasing external [Ca2+] quickly and reversibly reduces the dark current and divalent cationophores increase the Ca2+ sensitivity. Ca2+ efflux from rod outer segments (ROS) of intact retinas occurs simultaneously with light responses. Vesicles prepared from ROS disk membranes become more permeable on illumination, releasing trapped ions or molecules, but intact outer segment disks have not previously been found to store sufficient Ca2+ in darkness and to release enough in light to meet the theoretical requirements for control of the dark current by varying cytoplasmic Ca2+ (refs 14-18). We now report experiments that show the required Ca2+ storage and release from rod disk membranes suspended in media containing high-energy phosphate esters and electrolytes approximating the cytoplasmic composition of live rod cells. Cyclic GMP stimulates Ca2+ uptake by ROS disks in such media.

  7. Control rod calibration and reactivity effects at the IPEN/MB-01 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Letícia Negrão; Gonnelli, Eduardo; Santos, Adimir dos [Nuclear Engineering Center, Nuclear and Energy Research Institute- IPEN/CNEN-SP, Av. Lineu Prestes 2242 - Cidade Universitária - 05508-000 - São Paulo - SP (Brazil)

    2014-11-11

    Researches that aim to improve the performance of neutron transport codes and quality of nuclear cross section databases are very important to increase the accuracy of simulations and the quality of the analysis and prediction of phenomena in the nuclear field. In this context, relevant experimental data such as reactivity worth measurements are needed. Control rods may be made of several neutron absorbing materials that are used to adjust the reactivity of the core. For the reactor operation, these experimental data are also extremely important: with them it is possible to estimate the reactivity worth by the movement of the control rod, understand the reactor response at each rod position and to operate the reactor safely. This work presents a temperature correction approach for the control rod calibration problem. It is shown the control rod calibration data of the IPEN/MB-01 reactor, the integral and differential reactivity curves and a theoretical analysis, performed by the MCNP-5 reactor physics code, developed and maintained by Los Alamos National Laboratory, using the ENDF/B-VII.0 nuclear data library.

  8. Control rod calibration and reactivity effects at the IPEN/MB-01 reactor

    Science.gov (United States)

    Pinto, Letícia Negrão; Gonnelli, Eduardo; dos Santos, Adimir

    2014-11-01

    Researches that aim to improve the performance of neutron transport codes and quality of nuclear cross section databases are very important to increase the accuracy of simulations and the quality of the analysis and prediction of phenomena in the nuclear field. In this context, relevant experimental data such as reactivity worth measurements are needed. Control rods may be made of several neutron absorbing materials that are used to adjust the reactivity of the core. For the reactor operation, these experimental data are also extremely important: with them it is possible to estimate the reactivity worth by the movement of the control rod, understand the reactor response at each rod position and to operate the reactor safely. This work presents a temperature correction approach for the control rod calibration problem. It is shown the control rod calibration data of the IPEN/MB-01 reactor, the integral and differential reactivity curves and a theoretical analysis, performed by the MCNP-5 reactor physics code, developed and maintained by Los Alamos National Laboratory, using the ENDF/B-VII.0 nuclear data library.

  9. Experience with incomplete control rod insertion in fuel with burnup exceeding approximately 40 GWD/MTU

    Energy Technology Data Exchange (ETDEWEB)

    Kee, E. [Houston Lighting & Power Co., Wadworth, TX (United States)

    1997-01-01

    Analysis and measurement experience with fuel assemblies having incomplete control rod insertion at burnups of approximately 40 GWD/MTU is presented. Control rod motion dynamics and simplified structural analyses are presented and compared to measurement data. Fuel assembly growth measurements taken with the plant Refueling Machine Z-Tape are described and presented. Bow measurements (including plug gauging) are described and potential improvements are suggested. The measurements described and analysis performed show that sufficient guide tube bow (either from creep or yield buckling) is present in some high burnup assemblies to stop the control rods before they reach their full limit of travel. Recommendations are made that, if implemented, could improve cost performance related to testing and analysis activities.

  10. Stratigraphic control and formation evaluation of horizontal wells with MWD

    Energy Technology Data Exchange (ETDEWEB)

    Hammons, L.R.B. (Eastman Teleco (United States)); Sellers, D.H.; Fisher, E.K. (Texaco Inc. (United States))

    1992-10-01

    Sandstone reservoirs in the Gulf of Mexico typically do not form horizontal planes, and a predetermined course for a horizontal well cannot ensure that the well path will remain within the producing interval throughout the horizontal section. Detecting approaching bed boundaries and fluid contacts early enough to make the changes necessary to keep the well path in the producing interval is an important technical issue during the planning and drilling of horizontal wells. This paper reports that the first two horizontal wells drilled in the Gulf of Mexico achieved this objective with measurement-while-drilling (MWD) resistivity measurements and with supporting computer modeling for bed boundary detection.

  11. Semiactive Vibration Control for Horizontal Axis Washing Machine

    Directory of Open Access Journals (Sweden)

    Barış Can Yalçın

    2015-01-01

    Full Text Available A semiactive vibration control method is developed to cope with the dynamic stability problem of a horizontal axis washing machine. This method is based on adjusting the maximum force values produced by the semiactive suspension elements considering a washing machine’s vibration data (three axis angular position and three axis angular acceleration values in time. Before actuation signals are received by the step motors of the friction dampers, vibration data are evaluated, and then, the step motors start to narrow or expand the radius of bracelets located on the dampers. This changes the damping properties of the damper in the suspension system, and thus, the semiactive suspension system absorbs unwanted vibrations and contributes to the dynamic stability of the washing machine. To evaluate the vibration data, the angular position and angular acceleration values in three axes are defined in a function, and the maximum forces produced by semiactive suspension elements are calculated according to the gradient of this function. The relation between the dynamic stability and the walking stability is also investigated. A motion (gyroscope and accelerometer sensor is installed on the top-front panel of the washing machine because a mathematical model of a horizontal axis washing machine suggests that the walking behavior starts around this location under some assumptions, and therefore, calculating the vibrations occurring there is crucial. Semiactive damping elements are located under the left and right sides of the tub. The proposed method is tested during the spinning cycle of washing machine operation, increasing gradually from 200 rpm to 900 rpm, which produces the most challenging vibration patterns for dynamic stability. Moreover, the sound power levels produced by the washing machine are measured to evaluate the noise performance of the washing machine while the semiactive suspension system is controlled. The effectiveness of the

  12. Detailed analysis for a control rod worth of the gas turbine high temperature reactor (GTHTR300)

    Energy Technology Data Exchange (ETDEWEB)

    Nakata, Tetsuo; Katanishi, Shoji; Takada, Shoji; Yan, Xing; Kunitomi, Kazuhiko [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

    2002-11-01

    GTHTR300 is composed of a simplified and economical power plant based on an inherent safe 600 MWt reactor and a nearly 50% high efficiency gas turbine power conversion cycle. GTHTR300 core consist of annular fuel region, center and outer side reflectors because of cooling it effectively in depressurized accident conditions, and all control rods are located in both side reflectors of annular core. As a thermal neutron spectrum is strongly distorted in reflector regions, an accurate calculation is especially required for the control rod worth evaluation. In this study, we applied the detailed Monte Carlo calculations of a full core model, and confirmed that our design method has enough accuracy. (author)

  13. Heat flux and temperature determination on the control rod outer surface

    Energy Technology Data Exchange (ETDEWEB)

    Taler, J.; Cebula, A. [Cracow Univ. of Tech., Cracow (Poland); Marcinkiewicz, J.; Tinoco, H. [Forsmarks Kraftgrupp AB, Osthammar (Sweden)

    2011-07-01

    The paper presents heat transfer calculation results concerning a control rod of Unit 3 of Forsmark Nuclear Power Plant (NPP). The part of the control rod, which is the object of interest, is surrounded by a mixing region of hot and cold flows and, as a consequence, is subjected to thermal fluctuations. The paper describes a numerical test which validates the method based on the solution of the inverse heat conduction problem (IHCP). The comparison of the results achieved by two methods, CFD and IHCP, including a description of the IHCP method used in the calculation process, shows a very good agreement between the methods. (author)

  14. Verification of heat flux and temperature calculation on the control rod outer surface

    Science.gov (United States)

    Taler, Jan; Cebula, Artur

    2011-12-01

    The paper presents heat transfer calculation results concerning a control rod of Forsmark Nuclear Power Plant (NPP). The part of the control rod, which is the object of interest, is surrounded by a mixing region of hot and cold flows and, as a consequence, is subjected to thermal fluctuations. The paper describes a numerical test which validates the method based on the solution of the inverse heat conduction problem (IHCP). The comparison of the results achieved by two methods, computational fluid dynamics (CFD) simulations and IHCP, including a description of the IHCP method used in the calculation process, shows a very good agreement between the methods.

  15. Structure Optimization Design of the Electronically Controlled Fuel Control Rod System in a Diesel Engine

    Directory of Open Access Journals (Sweden)

    Hui Jin

    2015-01-01

    Full Text Available Poor ride comfort and shorter clutch life span are the key factors restricting the commercialization of automated manual transmission (AMT. For nonelectrically controlled engines or AMT where cooperative control between the engine and the transmission is not realizable, applying electronically controlled fuel control rod systems (ECFCRS is an effective way to solve these problems. By applying design software such as CATIA, Matlab and Simulink, and MSC Adams, a suite of optimization design methods for ECFCRS drive mechanisms are developed here. Based on these new methods, design requirements can be analyzed comprehensively and the design scheme can be modified easily, thus greatly shortening the design cycle. The bench tests and real vehicle tests indicate that the system developed achieves preferable engine speed following-up performance and engine speed regulating performance. The method developed has significance as a reference for developing other vehicle systems.

  16. Subplane-based Control Rod Decusping Techniques for the 2D/1D Method in MPACT

    Energy Technology Data Exchange (ETDEWEB)

    Graham, Aaron M [ORNL; Collins, Benjamin S [ORNL; Downar, Thomas [University of Michigan

    2017-01-01

    The MPACT transport code is being jointly developed by Oak Ridge National Laboratory and the University of Michigan to serve as the primary neutron transport code for the Virtual Environment for Reactor Applications Core Simulator. MPACT uses the 2D/1D method to solve the transport equation by decomposing the reactor model into a stack of 2D planes. A fine mesh flux distribution is calculated in each 2D plane using the Method of Characteristics (MOC), then the planes are coupled axially through a 1D NEM-P$_3$ calculation. This iterative calculation is then accelerated using the Coarse Mesh Finite Difference method. One problem that arises frequently when using the 2D/1D method is that of control rod cusping. This occurs when the tip of a control rod falls between the boundaries of an MOC plane, requiring that the rodded and unrodded regions be axially homogenized for the 2D MOC calculations. Performing a volume homogenization does not properly preserve the reaction rates, causing an error known as cusping. The most straightforward way of resolving this problem is by refining the axial mesh, but this can significantly increase the computational expense of the calculation. The other way of resolving the partially inserted rod is through the use of a decusping method. This paper presents new decusping methods implemented in MPACT that can dynamically correct the rod cusping behavior for a variety of problems.

  17. Degradation in steam of 60 cm-long B4C control rods

    Science.gov (United States)

    Dominguez, C.; Drouan, D.

    2014-08-01

    In the framework of nuclear reactor core meltdown accident studies, the degradation of boron carbide control rod segments exposed to argon/steam atmospheres was investigated up to about 2000 °C in IRSN laboratories. The sequence of the phenomena involved in the degradation has been found to take place as expected. Nevertheless, the ZrO2 oxide layer formed on the outer surface of the guide tube was very protective, significantly delaying and limiting the guide tube failure and therefore the boron carbide pellet oxidation. Contrary to what was expected, the presence of the control rod decreases the hydrogen release instead of increasing it by additional oxidation of boron compounds. Boron contents up to 20 wt.% were measured in metallic mixtures formed during degradation. It was observed that these metallic melts are able to attack the surrounding fuel rods, which could have consequences on fuel degradation and fission product release kinetics during severe accidents.

  18. Experimental validation of effectiveness of rod-type burnable poisons on reactivity control in HTTR

    Energy Technology Data Exchange (ETDEWEB)

    Goto, Minoru, E-mail: goto.minoru@jaea.go.j [Japan Atomic Energy Agency, 4002 Narita-cho, Oarai-machi, Higashi-ibaraki-gun, Ibaraki-ken 311-1393 (Japan); Shiozawa, Shusaku; Fujimoto, Nozomu; Nakagawa, Shigeaki [Japan Atomic Energy Agency, 4002 Narita-cho, Oarai-machi, Higashi-ibaraki-gun, Ibaraki-ken 311-1393 (Japan); Nakao, Yasuyuki [Department of Applied Quantum Physics and Nuclear Engineering, Kyusyu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395 (Japan)

    2010-10-15

    In block-type high temperature gas-cooled reactors (HTGRs), insertion depth of control rods (CRs) into a core should be retained shallow to keep fuel temperature below 1495 {sup o}C through a burnup period, and hence excess reactivity should be reduced through a different method. Loading burnable poisons (BPs) into the core is considered as a method to resolve this problem as in case of light water reactors (LWRs). Effectiveness of BPs on reactivity control in LWRs has been validated by experimental data, however, this has not been done yet for HTGRs, because there was not enough burnup characteristics data for HTGRs required for the validation. The High Temperature Engineering Test Reactor (HTTR) is a block-type HTGRs and it adopts rod-type BPs to control reactivity. The HTTR has been operated up to middle burnup, and thereby the experimental data was expected to show effect of the BPs on the reactivity control. Hence, in order to validate effectiveness of rod-type BPs on reactivity control in the HTTR, we investigated on the HTTR results whether the BPs have functioned as designed. As a result, the CRs insertion depth has been retained shallow within allowable range, and then effectiveness of rod-type BPs on reactivity control in the HTTR was validated.

  19. AgInCd control rod failure in the QUENCH-13 bundle test

    Energy Technology Data Exchange (ETDEWEB)

    Sepold, L. [Forschungszentrum Karlsruhe, Institut fuer Materialforschung, Nuclear Safety Program (NUKLEAR), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)], E-mail: leo.sepold@imf.fzk.de; Lind, T. [Paul Scherrer Institut, Laboratory for Thermalhydralics (LTH), Department of Nuclear Energy and Safety (NES), 5232 Villigen PSI (Switzerland); Csordas, A. Pinter [Fuel Materials Department, HAS KFKI AEKI, 1121 Budapest (Hungary); Stegmaier, U.; Steinbrueck, M.; Stuckert, J. [Forschungszentrum Karlsruhe, Institut fuer Materialforschung, Nuclear Safety Program (NUKLEAR), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2009-09-15

    The QUENCH off-pile experiments performed at the Karlsruhe Research Center are to investigate the high-temperature behavior of Light Water Reactor (LWR) core materials under transient conditions and in particular the hydrogen source term resulting from the water injection into an uncovered LWR core. The typical LWR-type QUENCH test bundle, which is electrically heated, consists of 21 fuel rod simulators with a total length of approximately 2.5 m. The Zircaloy-4 rod claddings and the grid spacers are identical to those used in Pressurized Water Reactors (PWR) whereas the fuel is represented by ZrO{sub 2} pellets. In the QUENCH-13 experiment the single unheated fuel rod simulator in the center of the test bundle was replaced by a PWR-type control rod. The QUENCH-13 experiment consisting of pre-oxidation, transient, and quench water injection at the bottom of the test section investigated the effect of an AgInCd/stainless steel/Zircaloy-4 control rod assembly on early-phase bundle degradation and on reflood behavior. Furthermore, in the frame of the EU 6th Framework Network of Excellence SARNET, release and transport of aerosols of a failed absorber rod were to be studied in QUENCH-13, which was accomplished with help of aerosol measurements performed by PSI-Switzerland and AEKI-Hungary. Control rod failure was initiated by eutectic interaction of steel cladding and Zircaloy-4 guide tube and was indicated at about 1415 K by axial peak absorber and bundle temperature responses and additionally by the on-line aerosol monitoring system. Significant releases of aerosols and melt relocation from the control rod were observed at an axial peak bundle temperature of 1650 K. At a maximum bundle temperature of 1820 K reflood from the bottom was initiated with cold water at a flooding rate of 52 g/s. There was no noticeable temperature escalation during quenching. This corresponds to the small amount of about 1 g in hydrogen production during the quench phase (compared to 42 g

  20. Preview Scheduled Model Predictive Control For Horizontal Axis Wind Turbines

    Science.gov (United States)

    Laks, Jason H.

    This research investigates the use of model predictive control (MPC) in application to wind turbine operation from start-up to cut-out. The studies conducted are focused on the design of an MPC controller for a 650˜KW, three-bladed horizontal axis turbine that is in operation at the National Renewable Energy Laboratory's National Wind Technology Center outside of Golden, Colorado. This turbine is at the small end of utility scale turbines, but it provides advanced instrumentation and control capabilities, and there is a good probability that the approach developed in simulation for this thesis, will be field tested on the actual turbine. A contribution of this thesis is a method to combine the use of preview measurements with MPC while also providing regulation of turbine speed and cyclic blade loading. A common MPC technique provides integral-like control to achieve offset-free operation. At the same time in wind turbine applications, multiple studies have developed "feed-forward" controls based on applying a gain to an estimate of the wind speed changes obtained from an observer incorporating a disturbance model. These approaches are based on a technique that can be referred to as disturbance accommodating control (DAC). In this thesis, it is shown that offset-free tracking MPC is equivalent to a DAC approach when the disturbance gain is computed to satisfy a regulator equation. Although the MPC literature has recognized that this approach provides "structurally stable" disturbance rejection and tracking, this step is not typically divorced from the MPC computations repeated each sample hit. The DAC formulation is conceptually simpler, and essentially uncouples regulation considerations from MPC related issues. This thesis provides a self contained proof that the DAC formulation (an observer-controller and appropriate disturbance gain) provides structurally stable regulation.

  1. Prediction of the lifetime of the elements of the safety and control rods of nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Voskoboinikov, V.V.; Emel' yanov, I. Ya.; Lineva, A.F.; Pushkin, S.N.; Semchenko, E.L.; Usov, P.P.

    1987-07-01

    The authors construct a mathematical model based on the analytical solution to such parameters as magnetic flux, alignment, sliding friction, erosion, abrasion, corrosion, and irradiation for the purpose of predicting the service life of electromagnetically driven control rods and their drives. The analytical solution was verified experimentally on a bench simulation where it was found that incorrect assembly and alignment not only serve as the largest contributors to shortened service life of the rods and drives but also render the calculations of the model invalid.

  2. Using nonlinearity and spatiotemporal property modulation to control effective structural properties: dynamic rods

    DEFF Research Database (Denmark)

    Thomsen, Jon Juel; Blekhman, Iliya I.

    2007-01-01

    , and to call these dynamic materials or spatiotemporal composites. Also, according to theoretical predictions, structural nonlinearity enhances the possibilities of achieving specific effective properties. For example, with an elastic rod having cubical elastic nonlinearities, it seems possible to control......, and exemplified. Then simple approximate analytical expressions are derived for the effective wave speed and natural frequencies for one-dimensional wave propagation in a nonlinear elastic rod, where the spatiotemporal modulation is imposed as a high-frequency standing wave, supposed to be given. Finally the more...

  3. Quantitative uncertainty and sensitivity analysis of a PWR control rod ejection accident

    Energy Technology Data Exchange (ETDEWEB)

    Pasichnyk, I.; Perin, Y.; Velkov, K. [Gesellschaft flier Anlagen- und Reaktorsicherheit - GRS mbH, Boltzmannstasse 14, 85748 Garching bei Muenchen (Germany)

    2013-07-01

    The paper describes the results of the quantitative Uncertainty and Sensitivity (U/S) Analysis of a Rod Ejection Accident (REA) which is simulated by the coupled system code ATHLET-QUABOX/CUBBOX applying the GRS tool for U/S analysis SUSA/XSUSA. For the present study, a UOX/MOX mixed core loading based on a generic PWR is modeled. A control rod ejection is calculated for two reactor states: Hot Zero Power (HZP) and 30% of nominal power. The worst cases for the rod ejection are determined by steady-state neutronic simulations taking into account the maximum reactivity insertion in the system and the power peaking factor. For the U/S analysis 378 uncertain parameters are identified and quantified (thermal-hydraulic initial and boundary conditions, input parameters and variations of the two-group cross sections). Results for uncertainty and sensitivity analysis are presented for safety important global and local parameters. (authors)

  4. A new control valve with a push rod for intermediate-pressure cylinders of steam turbines

    Science.gov (United States)

    Zaryankin, A. E.; Arianov, S. V.; Paramonov, A. N.; Gotovtsev, A. M.; Storozhuk, S. K.

    2007-11-01

    We describe a new design of a control valve for intermediate-pressure cylinders with a perforated cup and a push rod that ensures smaller loss under rated operating conditions and features better reliability. Model tests were carried out to check the main design solutions.

  5. Numerical Analysis on the Free Fall Motion of the Control Rod Assembly for the Sodium Cooled Fast Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Se-Hong; Choi, Choengryul; Son, Sung-Man [ELSOLTEC, Yongin (Korea, Republic of); Kim, Jae-Yong; Yoon, Kyung-Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    On receiving the scram signal, the control rod assemblies are released to fall into the reactor core by its weight. Thus drop time and falling velocity of the control rod assembly must be estimated for the safety evaluation. However, because of its complex shape, it is difficult to estimate the drop time by theoretical method. In this study, numerical analysis has been carried out in order to estimate drop time and falling velocity of the control rod assembly to provide the underlying data for the design optimization. Numerical analysis has been carried out to estimate the drop time and falling velocity of the control rod assembly for sodium-cooled fast reactor. Before performing the numerical analysis for the control rod assembly, sphere dropping experiment has been carried out for verification of the CFD methodology. The result of the numerical analysis for the method verification is almost same as the result of the experiment. Falling velocity and drag force increase rapidly in the beginning. And then it goes to the stable state. When the piston head of the control rod assembly is inserted into the damper, the drag force increases instantaneously and the falling velocity decreases quickly. The falling velocity is reduced about 14 % by damper. The total drop time of the control rod assembly is about 1.47s. In the next study, the experiment for the control rod assembly will be carried out, and its result is going to be compared with the CFD analysis result.

  6. Development and control of the process for the manufacture of zircaloy-4 tubing for LWBR fuel rods

    Energy Technology Data Exchange (ETDEWEB)

    Eyler, J.H.

    1981-01-01

    The technical requirements for the Light Water Breeder Reactor (LWBR) fuel elements (fuel rods) imposed certain unique requirements for the low hafnium Zircaloy-4 tubing used as fuel rod cladding. This report describes, in detail, the tube manufacturing process, the product and process controls used, the inspections and tests performed, and the efforts involved in refining a commercial tube reducing process to produce tubes that would satisfy the requirements for LWBR fuel rod cladding.

  7. Application of Feedforward and Feedback Control Strategy for Wire Rod Hot Rolling Line

    Institute of Scientific and Technical Information of China (English)

    ZHU Hong-xiang; HAO Xiao-hong; WEN Zhi; HU Ze-qiang; ZHANG Yao-gen; CHEN Hu-qiu

    2005-01-01

    The feedforward and feedback control strategy of water flowrate based on the analysis of thermal process in water cooling box was proposed, and the control strategy was applied to wire rod hot rolling at Baosteel Co.The operation has proved that the strategy can control water flowrate in the cooling water box reasonably to ensure the temperature requirement of the wire discharged from the cooling water box.

  8. Control Rod Drive Mechanism Installed in the Internal of Reactor Pressure Vessel

    Energy Technology Data Exchange (ETDEWEB)

    Choi, M. H.; Choi, S.; Park, J. S.; Lee, J. S.; Kim, D. O.; Hur, N. S.; Hur, H.; Yu, J. Y

    2008-09-15

    This report describes the review results and important technologies related to the in-vessel type control rod drive mechanism. Generally, most of the CRDMs used in the PWR are attached outside of the reactor pressure vessel, and the pernetration of the vessel head can not avoid. However, in-vessel type CRDMs, which are installed inside the reactor vessel, can eliminate the possibility of rod ejection accidents and the penetration of the vessel head, and provide a compact design of the reactor vessel and containment. There are two kinds of in-vessel type CRDM concerning the driving force-driven by a driving motor and by a hydraulic force. Motor driven CRDMs have been mainly investigated in Japan(MRX, IMR, DRX, next generation BWR etc.), and developed the key components such as a canned motor, an integrated rod position indicator, a separating ball-nut and a ball bearing that can operate under the water conditions of a high temperature and pressure. The concept of hydraulically driven CRDMs have been first reported by KWU and Siemens for KWU 200 reactor, and Argentina(CAREM) and China(NHR-5, NHR-200) have been developed the internal CRDM with the piston and cylinder of slightly different geometries. These systems are driven by the hydraulic force which is produced by pumps outside of the reactor vessel and transmitted through a pipe penetrating the reactor vessel, and needs complicated control and piping systems including pumps, valves and pipes etc.. IRIS has been recently decided the internal CRDMs as the reference design, and an analytical and experimental investigations of the hydraulic drive concept are performed by POLIMI in Italy. Also, a small French company, MP98 has been developed a new type of control rods, called 'liquid control rods', where reactivity is controlled by the movement of a liquid absorber in a manometer type device.

  9. Control on self-assembly structures of rod-coil-rod (PANI)98-(PEG)136-(PANI)98 triblock copolymer

    Institute of Scientific and Technical Information of China (English)

    Zhifang YANG; Jingao WU; Yingkui YANG; Xingping ZHOU; Xiaolin XIE

    2008-01-01

    The self-assembly behaviors of the rod-coil-rod (PANI)98-(PEG)136-(PANI)98 triblock copolymer are investigated in different solvents, such as N-methyl-2-pyrrolidone (NMP), dimethyl formamide (DMF), ethanol and water. The effects of solvents, concentration and ultrasonic irradiation on self-assembly are discussed. The results indicate that the triblock copolymer forms particles, rods, fiber, networks and fiber bands in the above solvents, respectively. Especially, the triblock copolymer can form a multi-layer, tri-dimensional fibrous network and a petaline structure from the mono-layer fibrous network with the increase of its concentration in ethanol. Also, the ultrasonic irradiation has a great effect on the self-assembly of the triblock copolymer.

  10. Blackness coefficients, effective diffusion parameters, and control rod worths for thermal reactors - methods

    Energy Technology Data Exchange (ETDEWEB)

    Bretscher, M.M.

    1984-01-01

    Simple diffusion theory cannot be used to evaluate control rod worths in thermal neutron reactors because of the strongly absorbing character of the control material. However, reliable control rod worths can be obtained within the framework of diffusion theory if the control material is characterized by a set of mesh-dependent effective diffusion parameters. For thin slab absorbers the effective diffusion parameters can be expressed as functions of a suitably-defined pair of blackness coefficients. Methods for calculating these blackness coefficients in the P/sub 1/, P/sub 3/, and P/sub 5/ approximations, with and without scattering, are presented. For control elements whose geometry does not permit a thin slab treatment, other methods are needed for determining the effective diffusion parameters. One such method, based on reaction rate ratios, is discussed.

  11. High Temperature Electromechanical Components for Control Rod Drive Assemblies

    Science.gov (United States)

    Gleason, Thomas E.; Lazarus, Jonathan D.; Yaspo, Robert; Cole, Allan R.; Otwell, Robert L.; Schuster, Gary B.; Jaing, Thomas J.; Meyer, Raymond A.; Shukla, Jaikaran N.; Maldonado, Jerry

    1994-07-01

    The SP-100 power system converts heat generated within a compact fast spectrum nuclear reactor directly to electricity for spacecraft applications. The reactor control system contains the only moving mechanical and electromechanical components in the entire electrical generating system. The high temperature, vacuum environment presents unique challenges for these reactor control system components. This paper describes the environmental testing of these components that has been completed and that is in progress. The specific components and assemblies include electromagnetic (EM) coils, stepper motors, EM clutches, EM brakes, ball bearings, ball screw assemblies, constant torque spring motors, gear sets, position sensors, and very high temperature sliding bearings.

  12. Searching for full power control rod patterns in a boiling water reactor using genetic algorithms

    Energy Technology Data Exchange (ETDEWEB)

    Montes, Jose Luis [Departamento Sistemas Nucleares, ININ, Carr. Mexico-Toluca Km. 36.5, Ocoyoacac, Edo. de Mexico (Mexico)]. E-mail: jlmt@nuclear.inin.mx; Ortiz, Juan Jose [Departamento Sistemas Nucleares, ININ, Carr. Mexico-Toluca Km. 36.5, Ocoyoacac, Edo. de Mexico (Mexico)]. E-mail: jjortiz@nuclear.inin.mx; Requena, Ignacio [Departamento Ciencias Computacion e I.A. ETSII, Informatica, Universidad de Granada, C. Daniel Saucedo Aranda s/n. 18071 Granada (Spain)]. E-mail: requena@decsai.ugr.es; Perusquia, Raul [Departamento Sistemas Nucleares, ININ, Carr. Mexico-Toluca Km. 36.5, Ocoyoacac, Edo. de Mexico (Mexico)]. E-mail: rpc@nuclear.inin.mx

    2004-11-01

    One of the most important questions related to both safety and economic aspects in a nuclear power reactor operation, is without any doubt its reactivity control. During normal operation of a boiling water reactor, the reactivity control of its core is strongly determined by control rods patterns efficiency. In this paper, GACRP system is proposed based on the concepts of genetic algorithms for full power control rod patterns search. This system was carried out using LVNPP transition cycle characteristics, being applied too to an equilibrium cycle. Several operation scenarios, including core water flow variation throughout the cycle and different target axial power distributions, are considered. Genetic algorithm fitness function includes reactor security parameters, such as MLHGR, MCPR, reactor k{sub eff} and axial power density.

  13. Controlled self-assembly of conjugated rod-coil block copolymers for applications in organic optoelectronics

    Science.gov (United States)

    Tao, Yuefei

    Organic electronics are of great interest in manufacturing light weight, mechanical flexible, and inexpensive large area devices. While significant improvements have been made over the last several years and it is now clear that morphology on the lengthscale of exciton diffusion (10nm) is of crucial importance, a clear relationship between structure and device properties has not emerged. This lack of understanding largely emerges from an inability to control morphology on this lengthscale. This thesis will center around an approach, based on block copolymer self-assembly, to generate equilibrium nanostructures on the 10 nm lengthscale of exciton diffusion and study their effects on device performance. Self-assembly of semiconducting block copolymers is complicated by the non-classical chain shape of conjugated polymers. Unlike classical polymers, the chains do not assume a Gaussian coil shape which is stretched near block copolymer interfaces, instead the chains are elongated and liquid crystalline. Previous work has demonstrated how these new molecular interactions and shapes control the phase diagram of so-called rod-coil block copolymers. Here, we will focus on controlling domain size, orientation, and chemical structure. While domain size can be controlled directly through molecular weight, this requires significant additional synthesis of domain size is to be varied. Here, the domain size is controlled by blending homopolymers into a self-assembling rod-coil block copolymer. When coil-like blocks are incorporated, the domains swell, as expected. When rod-like blocks are incorporated, they interdigitate with the rods of the block copolymers. This results in an increase in interfacial area which forces the coils to rearrange and an overall decrease in domain size with increasing rod content. Control over lamellar orientation is crucial in order to design and control charge transport pathways and exciton recombination or separation interfaces. While numerous

  14. Blackness coefficients, effective diffusion parameters, and control rod worths for thermal reactors

    Energy Technology Data Exchange (ETDEWEB)

    Bretscher, M.M.

    1984-09-01

    Simple diffusion theory cannot be used to evaluate control rod worths in thermal reactors because of the strongly absorbing character of the control material. However, good results can be obtained from a diffusion calculation by representing the absorber slab by means of a suitable pair of internal boundary conditions, ..cap alpha.. and ..beta.., which are ratios of neutron flux to neutron current. Methods for calculating ..cap alpha.. and ..beta.. in the P/sub 1/, P/sub 3/, and P/sub 5/ approximations, with and without scattering, are presented. By appropriately weighting the fine-group blackness coefficients, broad group values, <..cap alpha..> and <..beta..>, are obtained. The technique is applied to the calculation of control rod worths of Cd, Ag-In-Cd, and Hf control elements. Results are found to compare very favorably with detailed Monte Carlo calculations. For control elements whose geometry does not permit a thin slab treatment, other methods are needed for determining the effective diffusion parameters. One such method is briefly discussed and applied to the calculation of control rod worths in the Ford Nuclear Reactor at the University of Michigan. Calculated and measured worths are found to be in good agreement.

  15. Stereotypical cell division orientation controls neural rod midline formation in zebrafish.

    Science.gov (United States)

    Quesada-Hernández, Elena; Caneparo, Luca; Schneider, Sylvia; Winkler, Sylke; Liebling, Michael; Fraser, Scott E; Heisenberg, Carl-Philipp

    2010-11-09

    The development of multicellular organisms is dependent on the tight coordination between tissue growth and morphogenesis. The stereotypical orientation of cell divisions has been proposed to be a fundamental mechanism by which proliferating and growing tissues take shape. However, the actual contribution of stereotypical division orientation (SDO) to tissue morphogenesis is unclear. In zebrafish, cell divisions with stereotypical orientation have been implicated in both body-axis elongation and neural rod formation, although there is little direct evidence for a critical function of SDO in either of these processes. Here we show that SDO is required for formation of the neural rod midline during neurulation but dispensable for elongation of the body axis during gastrulation. Our data indicate that SDO during both gastrulation and neurulation is dependent on the noncanonical Wnt receptor Frizzled 7 (Fz7) and that interfering with cell division orientation leads to severe defects in neural rod midline formation but not body-axis elongation. These findings suggest a novel function for Fz7-controlled cell division orientation in neural rod midline formation during neurulation.

  16. Neutronic analysis of absorbing materials for the control rod system in reactor ALLEGRO

    Energy Technology Data Exchange (ETDEWEB)

    Cajko, Frantisek; Secansky, Michal; Chrebet, Tomas; Zajac, Radoslav; Darilek, Petr [VUJE, a.s., Trnava (Slovakia)

    2016-09-15

    Experimental reactor ALLEGRO is a gas cooled fast reactor in the design stage. The current design of its reactivity control system is based on control rods filled with boron carbide as the absorber. Because of disadvantages connected to high boron enrichment a possibility of using other absorbent materials was explored to lower the boron enrichment and increase the worth of the control rods. The results of neutronic Monte-Carlo analyses in a computational supercell are presented in this paper. Three absorbent materials most suitable for a use in reactor ALLEGRO (B{sub 4}C, EuB{sub 6} and ReB{sub 2}) have been analysed also in a full core model. A possible benefit of a neutron trap concept is explored as well but materials with satisfactory neutronic properties proved to be not suitable for expected high temperatures in the reactor.

  17. Birth control in India: the carrot and the rod?

    Science.gov (United States)

    Landman, L C

    1977-01-01

    The fall of the Indira Gandhi government seems to validate the prediction made six years ago by demographer Frank Notestein that any attempt by a developing country to force its people to use birth control methods "would be more likely to bring down the government than the birthrate." This author, however, interviewing couples seeking sterilization, contraception and abortion, as well as the doctors, nurses and administrators who provided the service, just weeks before the upset election, found that family planning was very much wanted and needed by the people, and was being provided in an efficient and humane way. Thus, pressing the population panic button was probably not only unnecessary, but a tragic mistake on the part of the Gandhi government.

  18. Magnetic Actuation Connector Between Extension Shaft and Armature for Bottom Mounted Control Rod Drive Mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Hyung; Cho, Yeong Garp; Kim, Jong In [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    The electromagnet and armature inside the guide tube interact and produce magnetism, thus making the armature, connecting extension shaft and control rod move up and down to control the power of reactor. During the overhaul, the control absorber rod (CAR), extension shaft, and armature of BMCRDM are lifted together for closing a seal valve. But total length of CAR assembly is so long that it cannot be lifted due to exposure above the water level of pool which is strictly controlled. In addition to this, it is difficult to calibrate a position indicator and lifting force of electromagnet without armature assembly as a seal valve is closed. For this reason, it is necessary to install a disconnecting system between armature and extension shaft. Therefore, KAERI has developed magnetic actuation connector using plunger between armature and extension shaft for the bottom mounted control rod drive mechanism in research reactor. The results of a FEM and the experiments in this work lead to the following conclusions: The FEM result for the design of the magnetic actuation connector is compared with the measured lifting force of prototype production. As a result, it is shown that the lifting force of the prototype connector has a good agreement with the result of the FEM. A newly developed technique of prototype magnetic actuation connector which is designed by FEM analysis result is proposed.

  19. Control of rod retinomotor movements in teleost retinae: the role of dopamine in mediating light-dependent and circadian signals.

    Science.gov (United States)

    Kolbinger, W; Wagner, D; Wagner, H J

    1996-09-01

    In the retinae of lower vertebrates, several morphological changes, including photomechanical movements of rods, cones and pigment epithelium, occur during light and dark adaptation. We studied the contribution of exogenous and endogenous circadian control mechanisms to rod retinomotor movements in the teleost retina and their dependence on an intact dopaminergic system. Blue acara (Aequidens pulcher) were kept under a 12:12 h light/dark cycle. One population of fish remained untreated; another population was treated with 6-hydroxy-dopamine, selectively to destroy dopaminergic cells. Rod positions were determined in semi-thin radial sections. During the normal light/dark cycle, rods were elongated during the day and contracted at night. Rod retinomotor movements persisted during two cycles of continuous darkness. Expected light levels of rod positions were reduced by about 40% in comparison with normal light phases. Adaptation-dependent retinomotor movements and movements driven by an endogenous circadian clock also occurred in dopamine-depleted retinae. No statistically significant differences were observed between dopamine-containing and dopamine-depleted retinae. We conclude that rod retinomotor movements in teleost retinae are controlled by light and by an endogenous circadian clock. Dopamine plays no essential role in the light-dependent and endogenous control of rod retinomotor movements.

  20. Feasibility study of the University of Utah TRIGA reactor power upgrade in respect to control rod system

    Science.gov (United States)

    Cutic, Avdo

    The objectives of this thesis are twofold: to determine the highest achievable power levels of the current University of Utah TRIG Reactor (UUTR) core configuration with the existing three control rods, and to design the core for higher reactor power by optimizing the control rod worth. For the current core configuration, the maximum reactor power, eigenvalue keff, shutdown margin, and excess reactivity have been measured and calculated. These calculated estimates resulted from thermal power calibrations, and the control rod worth measurements at various power levels. The results were then used as a benchmark to verify the MCNP5 core simulations for the current core and then to design a core for higher reactor power. This study showed that the maximum achievable power with the current core configuration and control rod system is 150kW, which is 50kW higher than the licensed power of the UUTR. The maximum achievable UUTR core power with the existing fuel is determined by optimizing the core configuration and control rod worth, showing that a power upgrade of 500 kW is achievable. However, it requires a new control rod system consisting of a total of four control rods. The cost of such an upgrade is $115,000.

  1. Analysis of Reactivity Induced Accident for Control Rods Ejection with Loss of Cooling

    CERN Document Server

    Saad, Hend Mohammed El Sayed; Wahab, Moustafa Aziz Abd El

    2013-01-01

    Understanding of the time-dependent behavior of the neutron population in nuclear reactor in response to either a planned or unplanned change in the reactor conditions, is a great importance to the safe and reliable operation of the reactor. In the present work, the point kinetics equations are solved numerically using stiffness confinement method (SCM). The solution is applied to the kinetics equations in the presence of different types of reactivities and is compared with different analytical solutions. This method is also used to analyze reactivity induced accidents in two reactors. The first reactor is fueled by uranium and the second is fueled by plutonium. This analysis presents the effect of negative temperature feedback with the addition positive reactivity of control rods to overcome the occurrence of control rod ejection accident and damaging of the reactor. Both power and temperature pulse following the reactivity- initiated accidents are calculated. The results are compared with previous works and...

  2. Controlling the Self-Assembly of Semiconducting Nanocrystals within Conjugated Rod-Coil Block Copolymers

    Science.gov (United States)

    McCulloch, Bryan L.; Urban, Jeff J.; Segalman, Rachel A.

    2010-03-01

    Blends of conjugated polymers and inorganic nanoparticles have been investigated for numerous optoelectronic applications however optimization relies on precise control over the nanoscale morphologies. Here, we show that conjugated rod-coil block copolymers can be designed to self assemble into controllable morphologies with the coil block templating nanocrystal location. We have constructed a model system where nanocrystals are blended with poly(alkoxy-phenylene vinylene-b-2-vinylpyridine) (PPV-b-P2VP), which self assembles into tunable morphologies. Semiconducting nanocrystals reside within the P2VP domain, due to the favorable interactions between P2VP and the nanoparticle surface as well as the exclusionary effects of the liquid crystalline PPV. The placement of the nanoparticles can be tuned by altering domain size, nanocrystal diameter and nanocrystal surface chemistry. These findings are used to develop a comprehensive understanding of the self assembly processes in conjugated rod-coil block copolymer nanocomposites.

  3. Controlling the Self-Assembly of Inorganic Nanoparticles within Conjugated Rod-Coil Block Copolymers

    Science.gov (United States)

    McCulloch, Bryan; Segalman, Rachel

    2011-03-01

    Blends of conjugated polymers and inorganic nanoparticles have been investigated for numerous applications however optimization relies on precise control over the nanoscale morphology. We have designed a conjugated rod-coil block copolymer consisting of poly(3-(2'-ethyl)hexylthiophene)-b-poly(2-vinyl pyridine) (P3EHT-b-P2VP) which self assembles into controllable morphologies. Inorganic nanoparticles reside within the P2VP domain due to the favorable interactions between P2VP and the nanoparticle surface as well as the exclusionary effects of the liquid crystalline P3EHT. The nanoparticle location can be tuned by altering nanocrystal surface chemistry. These findings are used to develop a comprehensive understanding of the self assembly processes in conjugated rod-coil block copolymer nanocomposites.

  4. Assessing the Effect of Fuel Burnup on Control Rod Worth for HEU and LEU Cores of Gharr-1

    Directory of Open Access Journals (Sweden)

    E.K. Boafo

    2013-02-01

    Full Text Available An important parameter in the design and analysis of a nuclear reactor is the reactivity worth of the control rod which is a measure of the efficiency of the control rod to absorb excess reactivity. During reactor operation, the control rod worth is affected by factors such as the fuel burnup, Xenon concentration, Samarium concentration and the position of the control rod in the core. This study investigates the effect of fuel burnup on the control rod worth by comparing results of a fresh and an irradiated core of Ghana's Miniature Neutron Source Reactor for both HEU and LEU cores. In this study, two codes have been utilized namely BURNPRO for fuel burnup calculation and MCNP5 which uses densities of actinides of the irradiated fuel obtained from BURNPRO. Results showed a decrease of the control rod worth with burnup for the LEU while rod worth increased with burnup for the HEU core. The average thermal flux in both inner and outer irradiation sites also decreased significantly with burnup for both cores.

  5. Electrically Controlled Optical Metamaterials Based on Dispersions of Nano-Rods

    Science.gov (United States)

    2011-11-15

    4844 Final Report ELECTRICALLY CONTROLLED OPTICAL METAMATERIALS BASED ON DISPERSIONS OF NANO-RODS Andrii B. Golovin , Jie Xiang, Heung-Shik Park...axis can be supplemented by gradients of the composition. For example, as shown by Golovin et al. [22,46] for isotropic dispersion of Au NRs...Optic. Lett. 2008, 33, 1342-1344. 22. Golovin , A.B.; Lavrentovich, O.D. Electrically reconfigurable optical metamaterial based on colloidal

  6. Computer simulation on the controlled cooling of 82B high-speed rod

    Institute of Scientific and Technical Information of China (English)

    Jinqiao Xu; Yazheng Liu; Shumei Zhou

    2008-01-01

    A modified temperature-phase transformation field coupled nonlinear mathematical model was made and used in com-puter simulation on the controlled cooling of 82B high-speed rods. The surface temperature history and volume fraction of pearlite as well as the phase transformation history were simulated by using the finite element software Marc/Mentat. The simulated results were compared with the actual measurement and the agreement is good which can validate the presented computational models.

  7. A Novel Control-rod Drive Mechanism via Electromagnetic Levitation in MNSR

    Directory of Open Access Journals (Sweden)

    Divandari Mohammad

    2014-07-01

    Full Text Available In this paper, an electromagnetic levitation system was used with a synchronous motor to navigate the control rod of a small-type research reactor. The result from this prototype magnetic levitation system was in agreement with simulation results. The control system was programmed in MATLAB through open-loop system, closed-loop with state feedback and closed-loop with state feedback integral tracking. The final control system showed the highest performance with a low positioning error. Our results showed that the developed control system has the potential to be used as a reliable actuator in nuclear reactors to satisfy higher performance and safety.

  8. Factors influencing helium measurements for detection of control rod failures in BWR

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, I.; Sihver, L. [Div. of Nuclear Engineering, Dept. of Applied Physics, Chalmers Univ. of Technology, SE-412 96 Gothenburg (Sweden); Loner, H.; Ledergerber, G. [Kernkraftwerk Leibstadt, CH-5325 Leibstadt (Switzerland); Schnurr, B. [E.ON Kernkraft GmbH, D-84049 Essenbach (Germany)

    2012-07-01

    Much effort has been made to minimize the number and consequences of fuel failures at nuclear power plants. The consequences of control rod failures have also gained an increased attention. In this paper we introduce a system for on-line surveillance of control rod integrity which has several advantages comparing to the surveillance methods available today in boiling water reactors (BWRs). This system measures the helium released from failed control rods containing boron carbide (B4C). However, there are a number of factors that might influence measurements, which have to be taken into consideration when evaluating the measured data. These factors can be separated into two groups: 1) local adjustments, made on the sampling line connecting the detector to the off-gas system, and 2) plant operational parameters. The adjustments of the sample line conditions include variation of gas flow rate and gas pressure in the line. Plant operational factors that may influence helium measurements can vary from plant to plant. The factors studied at Leibstadt nuclear power plant (KKL) were helium impurities in injected hydrogen gas, variation of the total off-gas flow and regular water refill. In this paper we discuss these factors and their significance and present experimental results of measurements at KKL. (authors)

  9. On-line fuel and control rod integrity surveillance in BWRs

    Energy Technology Data Exchange (ETDEWEB)

    Sihver, L.; Larsson, I. [CHalmers Univ. of Technology, Nuclear Engineering, Gothenberg (Sweden); Loner, H. [Kernkraftwerk Leibstadt, Leibstadt (Switzerland); Grundin, A.; Helmersson, J-O.; Ledergerber, G. [Forsmarks Kraftgrupp AB, Osthammar (Sweden)

    2013-07-01

    Surveillance of fuel and control rod integrity in a BWR core is essential to maintain a safe and reliable operation of the nuclear power plant. Any actions to be taken in the event of a fuel failure during reactor operation should be based on the best available information regarding the failure and expected consequences. The detection of fuel and control rod failures in BWRs is usually performed by analyzing samples of off-gases and coolant taken with a certain time intervals, e.g. once a week or once a month. This procedure can, however, leave the failure undetected in the core for quite some time. Therefore, a sufficient improvement of the surveillance of fuel and control rods can be achieved by simultaneous measurements of He and gamma emitting noble gases on-line in the off gas system. In this paper, experiences of such measurements performed at Kernkraftwerk Leibstadt (KKL) in Switzerland and Forsmark nuclear power plant (NPP) in Sweden will be presented. (author)

  10. Analysis on Electromagnetic Characteristics of Research Reactor Control Rod Drive Mechanism for Thrust Force Improvement

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Hyung; Choi, Myoung Hwan; Yu, Je Yong; Cho, Yeong Garp; Kim, Jong In [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2010-10-15

    The control rod drive mechanism (CRDM) is the part of reactor regulating system (RRS), which is located in the reactor pool top or the room below the reactor pool. The function of the CRDM is to insert, withdraw or maintain neutron absorbing material (control rod) at any required position within the reactor core, in order to the reactivity of the core. There are so many kinds of CRDM, such as magnetic-jack type, hydraulic type, rack and pinion type, chain type and linear or rotary step motor and so on. As a part of a new project, we are investigating the movable coil electromagnetic drive mechanism (MCEDM) which is new scheme for the reactor control rod adopted by China Advanced Research Reactor (CARR). To have a better knowledge of the electromagnetic and magnetic characteristics, numerical models of MCEDM are proposed. Especially in order to achieve improved thrust force, numerical magnetic field calculations for various kinds of magnetic and electromagnetic configuration have been performed. As a result, we present the improved design of MCEDM for research reactor

  11. Design of Seismic Test Rig for Control Rod Drive Mechanism of Jordan Research and Training Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Jongoh; Kim, Gyeongho; Yoo, Yeonsik; Cho, Yeonggarp; Kim, Jong In [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    The reactor assembly is submerged in a reactor pool filled with water and its reactivity is controlled by locations of four control absorber rods(CARs) inside the reactor assembly. Each CAR is driven by a stepping motor installed at the top of the reactor pool and they are connected to each other by a tie rod and an electromagnet. The CARs scram the reactor by de-energizing the electromagnet in the event of a safe shutdown earthquake(SSE). Therefore, the safety function of the control rod drive mechanism(CRDM) which consists of a drive assembly, tie rod and CARs is to drop the CAR into the core within an appropriate time in case of the SSE. As well known, the operability for complex equipment such as the CRDM during an earthquake is very hard to be demonstrated by analysis and should be verified through tests. One of them simulates the reactor assembly and the guide tube of the CAR, and the other one does the pool wall where the drive assembly is installed. In this paper, design of the latter test rig and how the test is performed are presented. Initial design of the seismic test rig and excitation table had its first natural frequency at 16.3Hz and could not represent the environment where the CRDM was installed. Therefore, experimental modal analyses were performed and an FE model for the test rig and table was obtained and tuned based on the experimental results. Using the FE model, the design of the test rig and table was modified in order to have higher natural frequency than the cutoff frequency. The goal was achieved by changing its center of gravity and the stiffness of its sliding bearings.

  12. Experiments on silver-indium-cadmium control rod failure during severe accident sequences

    Energy Technology Data Exchange (ETDEWEB)

    Steinbrueck, M.; Stegmaier, U. [Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany)

    2010-05-15

    Silver-indium-cadmium (SIC) alloy is used as neutron absorber material in control rods (CR) of Pressurized Water Reactors (PWR). It is the material with the lowest melting temperature (approx. 1100 K) among all metallic and ceramic materials applied in nuclear reactors. During a hypothetical severe accident the SIC melt is kept in its stainless steel (SS) cladding tube as long as this is intact. After failure of the cladding tube by eutectic interaction with the Zircaloy-4 (Zry-4) guide tube or latest by reaching the SS melting temperature SIC elements are released and may interact with other core components. Furthermore, Ag-In-Cd are one of the main contributors to aerosol release in the reactor cooling system and may strongly influence nature and transport of fission products in the primary circuit and later on in the containment. The bundle experiment QUENCH-13 with prototypical SIC control rod as well as two series of single-rod tests with 10-cm long CR segments were performed at Karlsruhe Institute of Technology (KIT, former FZK) in order to improve the data base on SIC CR degradation and aerosol release. This paper concentrates on the degradation and failure mechanisms of SIC CRs as well as on the interaction between SIC absorber melt with other core components. (orig.)

  13. Rod cluster control assemblies and rod cluster control guide tubes: wear and drop time; Grappes de commande et guides de grappes: usure et tempes de chute

    Energy Technology Data Exchange (ETDEWEB)

    Zbinden, M. [Electricite de France (EDF), Direction des Etudes et Recherches, 92 - Clamart (France)

    1997-12-31

    The wear of RCCAs and of RCC guide tubes is due to two quite different mechanisms and the remedies to apply for each case might lead to contradictory solutions: - the impact/sliding wear for the seldom moving RCCAs, namely the shutdown RCCAs, under flow-induced vibrations, - the axial sliding wear for the control rods subjected to the stepping movements ordered by the acting load. In this case the hydraulic sticking forces are those which produce an evolution of the surface states that may increase the drop time. The introduction, an historical survey of the encountered difficulties, is followed by short description of the components and then the paper presents contributions of EDF in the R and D field, which take place in two successive multi-annual projects. Lastly, some information is given about the recent evolutions and new problems as well for impact/sliding wear as for drop time under normal or seismic conditions. (author).

  14. Valuation of power oscillations in a BWR after control rod banks withdrawal events

    Energy Technology Data Exchange (ETDEWEB)

    Costa, A. L.; Pereira, C.; Da Silva, C. A. M.; Veloso, M. A. F. [Departamento de Engenharia Nuclear, Universidade Federal de Minas Gerais, Av. Antonio Carlos, 6627, CEP 31270-90, Belo Horizonte, MG (Brazil); Instituto Nacional de Ciencias e Tecnologia de Reatores Nucleares Inovadores/CNPq (Brazil)

    2009-07-01

    The out-of-phase mode of oscillation is a very challenging type of instability occurring in BWR (Boiling Water Reactor) and its study is relevant because of the safety implications related to the capability to promptly detect any such inadvertent occurrence by in-core neutron detectors, thus triggering the necessary countermeasures in terms of selected rod insertion or even reactor shutdown. In this work, control rod banks (CRB) withdrawal transient was considered to study the power instability occurring in a BWR. To simulate this transient, the control rod banks were continuously removed from the BWR core in different cases. The simulation resulted in a very large increase of power. To perform the instability simulations, the RELAP5/MOD3.3 thermal hydraulic system code was coupled with the PARCS/2.4 3D neutron kinetic code. Data from a real BWR, the Peach Bottom, have been used as reference conditions and reactor parameters. The trend of the mass flow rate, pressure, coolant temperature and the void fraction to four thermal hydraulic channels symmetrically located in the core with respect to the core centre, were taken. It appears that the velocity of the rod bank withdrawal is a very important aspect for reactor stability. The slowest CRB withdrawal (180 s) did not cause power perturbation while the fast removal (20 s) triggered a slow power oscillation that little by little amplified to reach levels of more 100% of the initial power after about 210 s. The investigation of the related thermo hydraulic parameters showed that the mass flow rate, the void fraction and also the coolant temperature began to oscillate at approximately the same time interval

  15. Monte Carlo simulation of a research reactor with nominal power of 7 MW to design new control safety rods

    Science.gov (United States)

    Shoushtari, M. K.; Kakavand, T.; Sadat Kiai, S. M.; Ghaforian, H.

    2010-03-01

    The Monte Carlo simulation has been established for a research reactor with nominal power of 7 MW. A detailed model of the reactor core was employed including standard and control fuel elements, reflectors, irradiation channels, control rods, reactor pool and thermal column. The following physical parameters of reactor core were calculated for the present LEU core: core reactivity ( ρ), control rod (CR) worth, thermal and epithermal neutron flux distributions, shutdown margin and delayed neutron fraction. Reduction of unfavorable effects of blockage probability of control safety rod (CSR)s in their interiors because of not enough space in their sites, and lack of suitable capabilities to fabricate very thin plates for CSR cladding, is the main aim of the present study. Making the absorber rod thinner and CSR cladding thicker by introducing a better blackness absorbing material and a new stainless steel alloy, respectively, are two studied ways to reduce the effects of mentioned problems.

  16. Determination of the controlling factors and origins of the bilinear flow from horizontal well transient responses

    Energy Technology Data Exchange (ETDEWEB)

    Baba, A.; Azzouguen, A.; Mazouzi, A. [Sonatrach/AMT/DP, Alger (Algeria); Tiab, D. [Oklahoma Univ., Norman, OK (United States); Aissaoui, K. [Sonatrach/AMT/PED, Alger (Algeria)

    2002-06-01

    Over the last ten years, the most significant technological advance in the petroleum industry has been the development of horizontal well drilling techniques. At intermediate time, linear flow is the dominant flow in the theory of horizontal wells. The analysis of horizontal well tests is being further complicated by the presence of a bilinear flow regime as intermediate time flow during the horizontal well transient behavior. In this study, the authors demonstrate the occurrence of a bilinear flow in horizontal wells as intermediate time flow regime. They also determine the controlling factors and the origins of the bilinear flow. An analogy is established between a horizontal well and a finite conductivity vertical fracture. An equation is developed using the application of the conventional and Tiab's Direct Synthesis (TDST) methods to determine the reservoir and well characteristics of the Hassi-Messaoud field of Algeria. 20 refs., 6 tabs., 9 figs.

  17. Control of cell morphogenesis in bacteria: two distinct ways to make a rod-shaped cell.

    Science.gov (United States)

    Daniel, Richard A; Errington, Jeff

    2003-06-13

    Cell shape in most eubacteria is maintained by a tough external peptidoglycan cell wall. Recently, cell shape determining proteins of the MreB family were shown to form helical, actin-like cables in the cell. We used a fluorescent derivative of the antibiotic vancomycin as a probe for nascent peptidoglycan synthesis in unfixed cells of various Gram-positive bacteria. In the rod-shaped bacterium B. subtilis, synthesis of the cylindrical part of the cell wall occurs in a helical pattern governed by an MreB homolog, Mbl. However, a few rod-shaped bacteria have no MreB system. Here, a rod-like shape can be achieved by a completely different mechanism based on use of polar growth zones derived from the division machinery. These results provide insights into the diverse molecular strategies used by bacteria to control their cellular morphology, as well as suggesting ways in which these strategies may impact on growth rates and cell envelope structure.

  18. Impact of the control rod consumption on the reactivity control of a SFR break-even core

    Energy Technology Data Exchange (ETDEWEB)

    Blanchet, D.; Fontaine, B. [CEA, DEN, SPRC, Cadarache, F-13108 Cedex Saint-Paul-lez-Durance (France)

    2012-07-01

    Current design studies on Sodium Fast Reactor (SFR) differ from those performed in the past by the fact that design criteria are now those of the Generation IV reactors. In order to improve their safety, reactors with break-even cores are preferred because they minimize the needs in terms of reactivity control and limit the consequences of control rod withdrawal. Furthermore, as the reactivity control needs are low, break-even core enables the use of absorbing materials with reduced efficiency (natural boron, hafnium...). Nevertheless, the use of control rods with few absorbing materials may present the disadvantage of a non-negligible ({approx}10%) loss of efficiency due to their consumption under irradiation. This paper presents a methodology to calculate accurately and analyze this consumption. (authors)

  19. Insertion exponential of reactivity. Application to the calibration of control rods; Insercion exponencial de reactividad. Aplicacion a la calibracion de barras de control

    Energy Technology Data Exchange (ETDEWEB)

    Blazquez Martinez, J. B.; Becares, V.

    2012-07-01

    The control rods are calibrated with several steps traditionally small reactivity. An innovation in this process is continuously withdrawing the control rod from the reactor core to the periphery. Innovation is done by 10% of the time for the usual procedure, which can result in cost savings in commercial reactors.

  20. RodPilot. Control rod control arriving in the 21st century. Higher operational safety and availability, more information, greater ease of operation; RodPilot. Die Steuerstabsteuerung kommt im 21. Jahrhundert an. Hoehere Betriebssicherheit und Verfuegbarkeit, mehr Information und Bedienkomfort

    Energy Technology Data Exchange (ETDEWEB)

    Baron, Clemens [AREVA NP GmbH, Erlangen (Germany)

    2010-01-15

    Areva has successfully launched RodPilot {sup registered}, its new digital control rod control system. After several years of development and qualification as well as testing in experimental facilities, the system was ready for worldwide installation and use in nuclear power plants equipped with pressurized water reactors. It is for this reason that the South African operator, Eskom, decided in favor of Areva and RodPilot when upgrading the reactor control system of its Koeberg nuclear power station. After implementation of RodPilot, the first of two units resumed operation smoothly in early April 2009. RodPilot offers clear increases in operational safety, availability, information, and ease of operation in reactor control especially to the operators of older reactors. (orig.)

  1. Implementation and Tests of FPGA-embedded PowerPC in the control system of the ATLAS IBL ROD card

    CERN Document Server

    Balbi, G; The ATLAS collaboration; Falchieri, D; Gabrielli, A; Furini, M; Kugel, A; Travaglini, R; Wensing, M

    2012-01-01

    The Insertable B-layer project is planned for the upgrade of the ATLAS experiment at LHC. A silicon layer will be inserted into the existing Pixel Detector together with new electronics. The readout off-detector system is implemented with a Back-Of-Crate module implementing I/O functionality and a Readout-Driver card (ROD) for data processing. The ROD hosts the electronics devoted to control operations implemented both with a back- compatible solution (via DSP) and with a PowerPC embedded into an FPGA. In this document major firmware and software achievements concerning the PowerPC implementation, tested on ROD prototypes, will be reported.

  2. Conceptual Design on Primary Control Rod Drive Mechanism of a Prototype Gen-IV SFR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Han; Koo, Gyeong Hoi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    This paper describes the key concept of the drive mechanism, and suggests a required motor power and reducer gears to meet the functional design requirements, and a seismic response analysis of CRDM housing is performed to check its structural integrity. An AC servo motor is selected as a CRA driving power because it uses permanent magnets and is brushless type while DC motor needs a brush and a coil rotates. The control shim motor size is constrained by a housing diameter of 250mm. The driving system has several design requirements. To calculate the motor power, the drive shaft torque is needed. One part of the drive shaft has a lead screw, driving by a ball-nut. The ball screw driver torque (Tr) is calculated by some equations as follow; A servo motor with a nominal power of 100W, a nominal torque of 0.32 N-m (max. 0.48N-m) is selected considering a safety margin. Its diameter is about 50mm. The fast drive-in motor needs a strong power to insert enforcedly the stuck CRA into core within a required time. The motor sizes are calculated by the same procedure. The diameters are in the range of 80mm to 110mm by the insertion time (10 ∼ 24 seconds). The prototype Gen-IV SFR (sodium-cooled Fast Reactor) is of 150MWe capacity. The reactor has six primary control rod assemblies(CRAs). The primary control rod is used for power control, burn-up compensation and reactor shutdown in response to demands from the plant control or protection systems. The control rod drive mechanism (CRDM) consists of the drive motor assembly, the driveline, and its housing. The driveline consists of three concentric members of a drive shaft, a tension tube, and a position indicator rod, and it connects the drive motor assembly to the CRA. Main issue is that these many driving parts shall be enclosed within a limited housing diameter because the available pitch of CRDMs is limited by 300mm.

  3. Design, Implementation and Evaluation of a Pump-Controlled Circuit for Single Rod Actuators

    Directory of Open Access Journals (Sweden)

    Ahmed Imam

    2017-02-01

    Full Text Available Pump-controlled hydraulic circuits are more efficient than valve-controlled circuits, as they eliminate the energy losses due to flow throttling in valves and require less cooling effort. Presently existing pump-controlled solutions for single rod cylinders encounter an undesirable performance during certain operating conditions. This paper investigates the performance issues in common pump-controlled circuits for the single rod actuators. Detailed analysis is conducted that identifies these regions in a load-velocity plane and the factors affecting them. The findings are validated by experimental results. A new design is then proposed that employs a limited throttling valve alongside two pilot operated check valves for differential flow compensation to improve the performance. The valve is of the flow control type and is chosen to have a throttling effect over critical regions; it has the least throttling over other operating regions, thus maintaining efficiency. Experimental work demonstrates improved performance in a full operating range of the actuator as compared to a circuit that uses only the pilot-operated check valves. This circuit is energy efficient and capable of recuperating energy.

  4. Conceptual Design Study on Electromagnets of Control Rod Drive Mechanism of a SFR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jaehan; Koo, Gyeonghoi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-05-15

    The prototype SFR has six primary control rod assemblies(CRAs) and three secondary shutdown assemblies. The primary control system is used for power control, burnup compensation and reactor shutdown in response to demands from the plant control or protection systems. This paper describes the design concept of primary control rod drive mechanism shortly, and performs the parametric design studies for the electromagnet device of the drive mechanism to maximize CRA gripping force. The electromagnetic core usually confines and guides the magnetic field. The major parameters influenced on the electromagnetic force are the geometry and arrangement of the electromagnet and armature for a given coil specification. A typical equation calculating the electromagnetic force for a solenoid type is represented in equation. The first one is the increasing of the flux cross section area (Α{sub c}, Α{sub g}) in magnetic field connecting of air gap, armature and electromagnets. Secondly, the reducing of the path lengths (l{sub c}, l{sub g}) of the armature and electromagnet makes the magnetic flux (Β) resistance to be low. An electromagnet field analyses are performed for the initial design values of the electromagnet device. The gripping force is about 3 times of CRA weight when one coil is power on. The parametric studies on air gap, core sizes configuring of the electromagnet cores are performed to maximize the electromagnetic force.

  5. Research and application of an intelligent recloser controller installed on outdoor rod

    Institute of Scientific and Technical Information of China (English)

    廖力清; 陈燕辉; 凌玉华; 杨欣荣

    2002-01-01

    A new type of intelligent recolser controller installed on the outdoor rod is developed, which is mainly composed of microcontroller of Intel 87C196KC-20 and CPLD devices. This controller integrates all the functions of measuring, controlling, protection, fault diagnosis, communication, remote-controlled operation and self-power devices with infra-red remote control devices as a unit. The controller applies the distributed structure, field concentration line and intelligent technology to seal up the synthetic servomechanisms such as the microcomputer-based protection and measuring devices in the second stage of the mini out-door transformer substation, which are distributed on the outdoor circuit switches on the spot and formed as a whole. Therefore, this technology can transform a large number of ordinary homemade SF6 circuit beaker and vacuum circuit breaker into intelligent circuit recloser, thus replacing the expensive imported automatic circuit recolser.

  6. Analysis of the burnup of the control rods with the COREMASTER-Presto code; Analisis del quemado de barras de control con el codigo COREMASTER-PRESTO

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, J.L.; Alonso, G.; Perusquia, R.; Montes, J.L.; Hernandez, H. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: jlhm@nuclear.inin-mx

    2003-07-01

    An evaluation of the capacity of the COREMASTER-Presto code, to evaluate generically the burnt of the control bars in the Laguna Verde reactors plant (CLV) is made. It was found that the code only reports burnt values of the control rods in MWD/TM, in spite of having with a second order polynomial model, for the conversion to remainder of the Boron-10 (B-10). It was observed that said model is adequate only for burnt smaller to 45,000 MWD/TM. To evaluate the burnt of the control rods it was reproduced the balance cycle of 18 months for the CLV, executing Cm-Presto during 13 consecutive cycles. First without rod burnt, taking this as the base case. Later on, cases with 1, 2 and up to 13 cycles with rod burnt were generated. When comparing results it was observed that the control rods pattern it loses reactivity lineally with the burnt one. By each 10 G Wd/T of burnt of the nucleus it is decreased the reactivity of the pattern rods {approx} 1 pcm in hot condition and of {approx} 20 pcm in cold condition. When burning three cycles those rods more burnt reached the 13,900 MWD/TM, equivalent to 36% of B-10 reduction, near value to 34% proposed by aging in the one lost study of B-10. It was observed that Cm-Presto it doesn't burn the superior node of the control rods when these are completely extracted. A one big lost of B-10, of the order of 50%, it represents only a decrease of 11% of the reactivity value of the rod. One can affirm that even when it is strongly decreased the content of B-10, the rod is continue considering as a black absorber, that is to say, thermal neutron that enters in the neutron rod that is absorbed. (Author)

  7. Evaluation of the Westinghouse 10B depletion for BWR control rods

    Energy Technology Data Exchange (ETDEWEB)

    Vallgren, Christina

    2008-03-15

    The aim of this work was to establish the 10B depletion model for CR 99 control rods by using the latest version of POLCA7. In order to obtain an understanding of the differences between the currently used 10B depletion models implemented in POLCA4 at O3 and in SIMULATE-3 at OL1, and the latest improved model implemented in the latest POLCA7, this work has been performed in three different parts. The first part of the work was to find out how large differences there exist in 10B depletion between the calculated data by using the latest core monitoring system (POLCA7 version 4.10.0) and the measured data obtained in the hot-cell laboratory in Studsvik. It was found that the 10B depletion computed by the latest POLCA7 version is in good agreement with the measured data from Studsvik. A poor agreement with a conservative overestimation in 10B depletion was also found between the old model and the measured data. The aim of the second part of the work was to compare the calculated 10B depletion values for two CR 99 rods from Olkiluoto 1 with the calculated 10B depletion value for a CR 99 rod from Oskarshamn 3, by using the new 10B depletion model implemented in the latest POLCA7 version. Swelling measurements of the boron carbide pins, used as absorber material, have indicated that the 10B depletion should be of similar magnitude for the rods in Olkiluoto 1 and the rod in Oskarshamn 3, whereas the calculated values by using the earlier 10B depletion models on the process computers showed a difference of about 20 %. By using the new 10B depletion model m POLCA7, it was found that the 10B depletion in the two studied cases was similar to each other and, thus, the hypothesis of a linear relationship between B{sub 4}C swelling and thermal neutron fluence was supported. This third part of the work was carried out at KKL, Switzerland, and focused on comparing the B depletion models used in Westinghouse/POLCA7 and KKL/PRESTO-2. It was found that there is a slight difference in

  8. Analyses of eigenvalue bias and control rod worths in FFTF (Fast Flux Test Facility)

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, J.V.; Dobbin, K.D.; Wootan, D.W.; Campbell, L.R.

    1987-01-01

    The Fast Flux Test Facility (FFTF) core loading during its ninth operating cycle was significantly different from that of previous cycles because of the presence of the Core Demonstration Experiment (CDE). The CDE consists of a number of axially blanketed fuel assemblies and internal blankets prototypic of advanced oxide cores in Liquid Metal Reactors (LMR). In preparation for the Cycle 9 reload design effort, a careful assessment of control rod worth and reactivity calculations for Cycles 1 through 8 was made. The goal of this study was to establish calculational biases and reduce uncertainties factored into the reload design calculations. These analyses helped assure that the operational objectives for Cycle 9 were met.

  9. R and D on Control Rod Magnetic Suspension Drive Mechanism of CARR

    Energy Technology Data Exchange (ETDEWEB)

    Xinxin, Wu; Huijie, Yan [Institute of Nuclear Energy Technology, Tsinghua University Neng Ke Lou (INET) Tsinghua University, 100084 Beijing (China)

    2011-07-01

    This paper deal with the research and develop (R and D) on Control Rod Magnetic Suspension Drive Mechanism (MSDM) of CARR. The MSDM is made up of tube, coil, armature, step motor, lead screw etc. The MSDM use electromagnetics as its main principle. The open solenoid electromagnet technique is employed to implement suspension function. It has advantages of high drive precision, high safety feature, good running reliability, easy maintenance and good economical property. The R and D process of MSDM has three phases including single coil electromagnet, principle prototype and engineering prototype. (author)

  10. The Domestication of a Interface Device for the HANARO Control Rod

    Energy Technology Data Exchange (ETDEWEB)

    Choe, Y. S.; Bae, S. H.; Kim, Y. K.; Jung, H. S.; Lee, J. H.; Kim, S. J.; Kang, K. D. [KAERI, Daejeon (Korea, Republic of)

    2010-12-15

    The signal processing unit for HANARO control rod supplied by a foreign company put difficulties on reactor operation due to discontinued production of the item and negative technical support. The development of the signal processing unit based on domestic technology has been carried out in order to solve the problems in issue and to ensure safe and reliable reactor operation. Considering the importance of its function, the project was proceeded by 3 separated steps as prototype, modification and practical application to HANARO. This paper describes the process test results of each developing stage

  11. The Operation of a Domestic Interface Device for the HANARO Control Rod

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Young San; Kim, Sang Jin; Lee, Jung Hee; Kim, Hyung Kyoo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2010-05-15

    The interface device for the HANARO control rod which was supplied by a foreign company put difficulties on reactor operation due to the obsolescence of the products and lukewarm technical support from the manufacturer. The development of the interface device based on domestic technology has been completed in order to solve the problems in this issue and to ensure safe and reliable reactor operation. This paper describes the development process of the domestic interface device conducted which was over 5 years, the field test results, and the reactor operation application results

  12. Validation of the Monte Carlo model developed to assess the activity generated in control rods of a BWR

    Science.gov (United States)

    Ródenas, José; Abarca, Agustín; Gallardo, Sergio; Sollet, Eduardo

    2010-07-01

    Control rods are activated by neutron reactions into the reactor. The activation is produced mainly in stainless steel and its impurities. The dose produced by this activity is not important inside the reactor, but it has to be taken into account when the rod is withdrawn from it. The neutron activation has been modeled with the MCNP5 code based on the Monte Carlo method. The number of reactions obtained with the code can be converted into activity. In this work, a detailed model of the control rod has been developed considering all its components: handle, tubes, gain, and central core. On the other hand, the rod has been divided into 5 zones in order to consider the different axial exposition to neutron flux into the reactor. Results of the Monte Carlo simulation for the neutron activation constitute a gamma source in the control rod. With this source, applying again the Monte Carlo method, doses at certain distance of the rod have been calculated. Comparison of calculated doses with experimental measurements leads to the validation of the model developed.

  13. Automatic boiling water reactor control rod pattern design using particle swarm optimization algorithm and local search

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Cheng-Der, E-mail: jdwang@iner.gov.tw [Nuclear Engineering Division, Institute of Nuclear Energy Research, No. 1000, Wenhua Rd., Jiaan Village, Longtan Township, Taoyuan County 32546, Taiwan, ROC (China); Lin, Chaung [National Tsing Hua University, Department of Engineering and System Science, 101, Section 2, Kuang Fu Road, Hsinchu 30013, Taiwan (China)

    2013-02-15

    Highlights: ► The PSO algorithm was adopted to automatically design a BWR CRP. ► The local search procedure was added to improve the result of PSO algorithm. ► The results show that the obtained CRP is the same good as that in the previous work. -- Abstract: This study developed a method for the automatic design of a boiling water reactor (BWR) control rod pattern (CRP) using the particle swarm optimization (PSO) algorithm. The PSO algorithm is more random compared to the rank-based ant system (RAS) that was used to solve the same BWR CRP design problem in the previous work. In addition, the local search procedure was used to make improvements after PSO, by adding the single control rod (CR) effect. The design goal was to obtain the CRP so that the thermal limits and shutdown margin would satisfy the design requirement and the cycle length, which is implicitly controlled by the axial power distribution, would be acceptable. The results showed that the same acceptable CRP found in the previous work could be obtained.

  14. Real-time horizontality adjusting and control system of a large platform applied to satellite experiment

    Institute of Scientific and Technical Information of China (English)

    ZHONG Shi-sheng; ZHANG Shi-peng; WANG Rui

    2007-01-01

    In order to satisfy a satellite horizontality requirement in an experiment, it is indispensable to monitor and adjust the horizontality of a large platform loading the satellite under the condition of ultra-low temperature with real time. So the control system design and control strategy are described in detail to accomplish the horizontality monitoring and adjusting. The system adopts the industry control computer as the upper computer and the SIEMENS S7-300 PLC as the lower computer. The upper computer that bases on industry configuration software IFIX takes charge of monitoring the platform and puts forward the control strategy. PLC takes charge of receiving the adjusting instructions and controlling the legs moving to accomplish the horizontality adjusting. The horizontality adjusting strategy is emphasized and the concept of grads is introduced to establish a mathematics model of the platform inclined state, so the adjusting method is obtained. Accordingly the key question of the automatic horizontality adjusting is solved in this control system.

  15. Assessment of the control rods shadow effect in the VENUS-F core

    Directory of Open Access Journals (Sweden)

    Cetnar Jerzy

    2014-12-01

    Full Text Available The partitioning and transmutation (P&T of spent nuclear fuel is an important field of present development of nuclear energy technologies. One of the possible ways to carry out the P&T process is to use the accelerator driven systems (ADS. This technology has been developed within the EURATOM Framework Programmes for several years now. Current research in this field is carried out within the scope of 7th FP project FREYA. Important parts of the project are experiments performed in the GUINEVERE facility devoted to characterising the subcritical core kinetics and development of reactivity monitoring techniques. The present paper considers the effects of control rods use on the core reactivity. In order to carry out the evaluation of the experimental results, it is important to have detailed core characteristics at hand and to take into consideration the differences in the effect of control rods acting separately or together (the so-called shadow effect on both the reactivity value and the measured neutron flux. Also any core asymmetry should be revealed. This goal was achieved by both MCNP simulations and the experimental results. However, in the case of experimental results, the need for calculating respective correction factors was unavoidable.

  16. Evaluation of Heat Removal from RBMK-1500 Core Using Control Rods Cooling Circuit

    Directory of Open Access Journals (Sweden)

    A. Kaliatka

    2008-01-01

    Full Text Available The Ignalina nuclear power plant is a twin unit with two RBMK-1500, graphite moderated, boiling water, multichannel reactors. After the decision was made to decommission the Ignalina NPP, Unit 1 was shut down on December 31, 2004, and Unit 2 is to be operated until the end of 2009. Despite of this fact, severe accident management guidelines for RBMK-1500 reactor at Ignalina NPP are prepared. In case of beyond design basis accidents, it can occur that no water sources are available at the moment for heat removal from fuel channels. Specificity of RBMK reactor is such that the channels with control rods are cooled with water supplied by the system totally independent from the reactor cooling system. Therefore, the heat removal from RBMK-1500 reactor core using circuit for cooling of rods in control and protection system can be used as nonregular mean for reactor cooldown in case of BDBA. The heat from fuel channels, where heat is generated, through graphite bricks is transferred in radial direction to cooled CPS channels. This article presents the analysis of possibility to remove heat from reactor core in case of large LOCA by employing CPS channels cooling circuit. The analysis was performed for Ignalina NPP with RBMK-1500 reactor using RELAP5-3D and RELAP5 codes. Results of the analysis have shown that, in spite of high thermal inertia of graphite, this heat removal from CPS channels allows to slow down effectively the core heat-up process.

  17. Control rod ejection accident analysis for a PWR with thorium fuel loading

    Energy Technology Data Exchange (ETDEWEB)

    Da Cruz, D.F. [Nuclear Research and Consultancy Group NRG, Westerduinweg 3, P.O. Box 25, 1755 ZG Petten (Netherlands)

    2010-07-01

    This paper presents the results of 3-D transient analysis of a pressurized water reactor (PWR) core loaded with 100% Th-Pu MOX fuel assemblies. The aim of this study is to evaluate the safety impact of applying a full loading of this innovative fuel in PWRs of the current generation. A reactivity insertion accident scenario has been simulated using the reactor core analysis code PANTHER, used in conjunction with the lattice code WIMS. A single control rod assembly, with the highest reactivity worth, has been considered to be ejected from the core within 100 milliseconds, which may occur due to failure of the casing of the control rod driver mechanism. Analysis at both hot full power and hot zero power reactor states have been taken into account. The results were compared with those obtained for a representative PWR fuelled with UO{sub 2} fuel assemblies. In general the results obtained for both cores were comparable, with some differences associated mainly to the harder neutron spectrum observed for the Th-Pu MOX core, and to some specific core design features. The study has been performed as part of the LWR-DEPUTY project of the EURATOM 6. Framework Programme, where several aspects of novel fuels are being investigated for deep burning of plutonium in existing nuclear power plants. (authors)

  18. Detection and sizing of defects in control rod drive mechanism penetrations using eddy current and ultrasonics

    Energy Technology Data Exchange (ETDEWEB)

    Light, G.M.; Fisher, J.L.; Tennis, R.F.; Stolte, J.S.; Hendrix, G.J. [Southwest Research Inst., San Antonio, TX (United States)

    1996-08-01

    Over the last two years, concern has been generated about the capabilities of performing nondestructive evaluation (NDE) of the closure-head penetrations in nuclear-reactor pressure vessels. These penetrations are primarily for instrumentation and control rod drive mechanisms (CRDMs) and are usually thick-walled Inconel tubes, which are shrink-fitted into the steel closure head. The penetrations are then welded between the outside surface of the penetration and the inside surface of the closure head. Stress corrosion cracks initiating at the inner surface of the penetration have been reported at several plants. Through-wall cracks in the CRDM penetration or CRDM weld could lead to loss of coolant in the reactor vessel. The CRDM penetration presents a complex inspection geometry for conventional NDE techniques. A thermal sleeve, through which pass the mechanical linkages for operating the control rods, is inserted into the penetration in such a way that only a small annulus (nominally 3 mm) exists between the thermal sleeve and inside surface of the penetration. Ultrasonic (UT) and eddy current testing (ET) techniques that could be used to provide defect detection and sizing capability were investigated. This paper describes the ET and UT techniques, the probes developed, and the results obtained using these probes and techniques on CRDM penetration mock-ups.

  19. Azcatl-CRP: An ant colony-based system for searching full power control rod patterns in BWRs

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, Juan Jose [Dpto. Sistemas Nucleares, ININ, Carr. Mexico-Toluca Km. 36.5, Salazar, Edo. de Mexico (Mexico)]. E-mail: jjortiz@nuclear.inin.mx; Requena, Ignacio [Dpto. Ciencias Computacion e I.A. ETSII Informatica, University of Granada, C. Daniel Saucedo Aranda s/n, 18071 Granada (Spain)]. E-mail: requena@decsai.ugr.es

    2006-01-15

    We show a new system named AZCATL-CRP to design full power control rod patterns in BWRs. Azcatl-CRP uses an ant colony system and a reactor core simulator for this purpose. Transition and equilibrium cycles of Laguna Verde Nuclear Power Plant (LVNPP) reactor core in Mexico were used to test Azcatl-CRP. LVNPP has 109 control rods grouped in four sequences and currently uses control cell core (CCC) strategy in its fuel reload design. With CCC method only one sequence is employed for reactivity control at full power operation. Several operation scenarios are considered, including core water flow variation throughout the cycle, target different axial power distributions and Haling conditions. Azcatl-CRP designs control rod patterns (CRP) taking into account safety aspects such as k {sub eff} core value and thermal limits. Axial power distributions are also adjusted to a predetermined power shape.

  20. Highly cooperative feedback control of retinal rod guanylate cyclase by calcium ions.

    Science.gov (United States)

    Koch, K W; Stryer, L

    1988-07-07

    Visual excitation in retinal rod cells is mediated by a cascade that leads to the amplified hydrolysis of cyclic GMP (cGMP) and the consequent closure of cGMP-activated cation-specific channels in the plasma membrane. Recovery of the dark state requires the resynthesis of cGMP, which is catalysed by guanylate cyclase, an axoneme-associated enzyme. The lowering of the cytosolic calcium concentration (Cai) following illumination is thought to be important in stimulating cyclase activity. This hypothesis is supported by the finding that the cGMP content of rod outer segments increases several-fold when Cai is lowered to less than 10 nM. It is evident that cGMP and Cai levels are reciprocally controlled by negative feedback. Guanylate cyclase from toad ROS is strongly stimulated when the calcium level is lowered from 10 microM to 10 nM, but only if they are excited by light. We show here that the guanylate cyclase activity of unilluminated bovine rod outer segments increases markedly (5 to 20-fold) when the calcium level is lowered from 200 nM to 50 nM. This steep dependence of guanylate cyclase activity on the calcium level in the physiological range has a Hill coefficient of 3.9. Stimulation at low calcium levels is mediated by a protein that can be released from the outer segment membranes by washing with a low salt buffer. Calcium sensitivity is partially restored by adding the soluble extract back to the washed membranes. The highly cooperative activation of guanylate cyclase by the light-induced lowering of Cai is likely to be a key event in restoring the dark current after excitation.

  1. Horizontal and Vertical Geodetic Control Data for the United States

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data contains a set of geodetic control stations maintained by the National Geodetic Survey. Each geodetic control station in this dataset has either a precise...

  2. Cost analysis of magnetically controlled growing rods compared with traditional growing rods for early-onset scoliosis in the US: an integrated health care delivery system perspective

    Science.gov (United States)

    Polly, David W; Ackerman, Stacey J; Schneider, Karen; Pawelek, Jeff B; Akbarnia, Behrooz A

    2016-01-01

    Purpose Traditional growing rod (TGR) for early-onset scoliosis (EOS) is effective but requires repeated invasive surgical lengthenings under general anesthesia. Magnetically controlled growing rod (MCGR) is lengthened noninvasively using a hand-held magnetic external remote controller in a physician office; however, the MCGR implant is expensive, and the cumulative cost savings have not been well studied. We compared direct medical costs of MCGR and TGR for EOS from the US integrated health care delivery system perspective. We hypothesized that over time, the MCGR implant cost will be offset by eliminating repeated TGR surgical lengthenings. Methods For both TGR and MCGR, the economic model estimated the cumulative costs for initial implantation, lengthenings, revisions due to device failure, surgical-site infections, device exchanges (at 3.8 years), and final fusion, over a 6-year episode of care. Model parameters were estimated from published literature, a multicenter EOS database of US institutions, and interviews. Costs were discounted at 3.0% annually and represent 2015 US dollars. Results Of 1,000 simulated patients over 6 years, MCGR was associated with an estimated 270 fewer deep surgical-site infections and 197 fewer revisions due to device failure compared with TGR. MCGR was projected to cost an additional $61 per patient over the 6-year episode of care compared with TGR. Sensitivity analyses indicated that the results were sensitive to changes in the percentage of MCGR dual rod use, months between TGR lengthenings, percentage of hospital inpatient (vs outpatient) TGR lengthenings, and MCGR implant cost. Conclusion Cost neutrality of MCGR to TGR was achieved over the 6-year episode of care by eliminating repeated TGR surgical lengthenings. To our knowledge, this is the first cost analysis comparing MCGR to TGR – from the US provider perspective – which demonstrates the efficient provision of care with MCGR. PMID:27695352

  3. Aspects of modeling and identification in the adaptive predictive control of horizontal balance process; Aspectos de modelagem e identificacao no controle preditivo adaptativo de um processo balanco horizontal

    Energy Technology Data Exchange (ETDEWEB)

    Marchi, Pierre A.; Coelho, Antonio A.R. [Santa Catarina Univ., Florianopolis, SC (Brazil)

    1998-07-01

    This paper presents three different design methodologies for the generalized predictive control strategy to deal with a nonlinear process. It covers the design and experimental study of the predictive controller for the horizontal balance plant. The effectiveness of the control schemes was evaluated under various operational conditions: setpoint changes and disturbances. The design philosophy of the predictive control was considered for a nonlinear model, as Hammerstein, and a linear model with a long range predictive identification. The overall performance of the predictive systems was studied and a comparison was made with the conventional linear predictive controller. (author)

  4. Test simulation of drop of control rods in Trillo NPP with CASMO-4 and SIMULATE-3; Simulacion de prueba de caida de barras de control en CNT con CASMO/SIMULATE

    Energy Technology Data Exchange (ETDEWEB)

    Encinas, L.; Bermejo, J. A.; Ortego, A.

    2011-07-01

    In this paper we describe the rod drop test that was performed in control CN Trillo for justifier the modification of design about of the restriction system functions, in particular the function of detection of inadvertent drop of control rods.

  5. Controllable end shape modification of ZnO nano-arrays/rods by a simple wet chemical etching technique

    Science.gov (United States)

    Sun, Jingchang; Zhao, Ting; Ma, Zhangwei; Li, Ming; Chang, Cheng; Liang, Hongwei; Bian, Jiming; Li, Chengren

    2015-09-01

    The well-aligned ZnO nano-arrays/rods synthesized by a chemical bath deposition method on a highly conductive Si substrate were chemically etched in an ammonia chloride aqueous solution. An obvious end shape modification of ZnO nano-arrays/rods was realized in this report. The hexagonal frustum end of ZnO nano-arrays/rods changed into a pyramid and the diameter of ZnO nano-arrays/rods decreased gradually with the increasing etching time. The evolution mechanism of the wet etching process was discussed based on a proposed evolution model. Photoluminescence measurements indicated that the near band edge emissions of ZnO nano-arrays/rods increased greatly after wet etching. The controllable end shape modification of ZnO nano-arrays/rods on a highly conductive Si substrate by this simple wet etching technique will further explore the application of ZnO in field emission devices and 1D based nano-devices with various end shapes.

  6. Fuzzy/Kalman Hierarchical Horizontal Motion Control of Underactuated ROVs

    Directory of Open Access Journals (Sweden)

    Francesco M. Raimondi

    2010-09-01

    Full Text Available A new closed loop fuzzy motion control system including on-line Kalman's filter (KF for the two dimensional motion of underactuated and underwater Remotely Operated Vehicle (ROV is presented. Since the sway force is unactuated, new continuous and discrete time models are developed using a polar transformation. A new hierarchical control architecture is developed, where the high level fuzzy guidance controller generates the surge speed and the yaw rate needed to achieve the objective of planar motion, while the low level controller gives the thruster surge force and the yaw control signals. The Fuzzy controller ensures robustness with respect to uncertainties due to the marine environment, forward surge speed and saturation of the control signals. Also Lyapunov's stability of the motion errors is proved based on the properties of the fuzzy maps. If Inertial Measurement Unit data (IMU is employed for the feedback directly, aleatory noises due to accelerometers and gyros damage the performances of the motion control. These noises denote a king of non parametric uncertainty which perturbs the model of the ROV. Therefore a KF is inserted in the feedback of the control system to compensate for the above uncertainties and estimate the feedback signals with more precision.

  7. Fuzzy/Kalman Hierarchical Horizontal Motion Control of Underactuated ROVs

    Directory of Open Access Journals (Sweden)

    Francesco M. Raimondi

    2010-06-01

    Full Text Available A new closed loop fuzzy motion control system including on-line Kalman's filter (KF for the two dimensional motion of underactuated and underwater Remotely Operated Vehicle (ROV is presented. Since the sway force is unactuated, new continuous and discrete time models are developed using a polar transformation. A new hierarchical control architecture is developed, where the high level fuzzy guidance controller generates the surge speed and the yaw rate needed to achieve the objective of planar motion, while the low level controller gives the thruster surge force and the yaw torque control signals. The Fuzzy controller ensures robustness with respect to uncertainties due to the marine environment, forward surge speed and saturation of the control signals. Also Lyapunov's stability of the motion errors is proved based on the properties of the fuzzy maps. If Inertial Measurement Unit data (IMU is employed for the feedback directly, aleatory noises due to accelerometers and gyros damage the performances of the motion control. These noises denote a kind of non parametric uncertainty which perturbs the model of the ROV. Therefore a KF is inserted in the feedback of the control system to compensate for the above uncertainties and estimate the feedback signals with more precision.

  8. Degradation and oxidation of B 4C control rod segments at high temperatures

    Science.gov (United States)

    Steinbrück, M.

    2010-05-01

    Extensive series of test were performed of the degradation of boron carbide absorber rods and the oxidation of the resultant absorber melts. Various types of control rod segments made of commercial materials used in French 1300 MW PWRs were investigated in the temperature range between 800 °C and 1700 °C in a steam atmosphere. The gaseous reaction products were analyzed quantitatively by mass spectroscopy for evaluation of the oxidation rates. Extensive post-test examinations were performed by light microscopy, scanning electron microscopy as well as EDX and Auger spectroscopy. Rapid melt formation due to eutectic interactions of stainless steel (cladding tube) and B 4C, on the one hand, and steel and Zircaloy-4 (guide tube), on the other hand, was observed at temperatures above 1250 °C. Complex multi-component, multi-phase melts were produced. ZrO 2 oxide scale on the outside kept the melt within the guide tube, thus preventing its early relocation and oxidation. Rapid oxidation of the absorber melts and remaining boron carbide pellets took place after failure of the protective oxide shell above 1450 °C. Only very little methane was produced in these tests which is of interest in fission product gas chemistry because of the production of organic iodine.

  9. Fuzzy logic modeling and control of steel rod quenching after hot rolling

    Science.gov (United States)

    Giorleo, G.; Memola Capece Minutolo, F.; Sergi, V.

    1997-10-01

    Reinforced concrete rod produced by European Community countries must comply with standards that establish minimum strength and tensile properties along with other technological and geometrical characteristics; however, possible variability within the assigned limits is not specified. Consequently, a number of manufacturing methods are now used, with the result that over time the mechanical properties of these products vary widely. Increased competition has led to the development of new procedures incorporating both process and quality control. One example is a process based on the heat treatment undergone by the metal bars leaving the final stand of the rolling mill train. In this way, the mechanical and technological properties can be graduated, thereby enhancing strength (particularly yield point) without altering the deformability of the material. This procedure does away with the need to alter the chemical composition of the steel used to manufacture the rods. Process adjustment still relies on the experience of the production manager, however. This paper examines the possibility of applying fuzzy logic computer techniques to the heat treatment process in order to render it more rational and independent of operator unreliability.

  10. Degradation and oxidation of B{sub 4}C control rod segments at high temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Steinbrueck, M., E-mail: martin.steinbrueck@kit.ed [Karlsruhe Institute of Technology, Institute for Materials Research I, Postfach 3640, D-76021 Karlsruhe (Germany)

    2010-05-15

    Extensive series of test were performed of the degradation of boron carbide absorber rods and the oxidation of the resultant absorber melts. Various types of control rod segments made of commercial materials used in French 1300 MW PWRs were investigated in the temperature range between 800 deg. C and 1700 deg. C in a steam atmosphere. The gaseous reaction products were analyzed quantitatively by mass spectroscopy for evaluation of the oxidation rates. Extensive post-test examinations were performed by light microscopy, scanning electron microscopy as well as EDX and Auger spectroscopy. Rapid melt formation due to eutectic interactions of stainless steel (cladding tube) and B{sub 4}C, on the one hand, and steel and Zircaloy-4 (guide tube), on the other hand, was observed at temperatures above 1250 deg. C. Complex multi-component, multi-phase melts were produced. ZrO{sub 2} oxide scale on the outside kept the melt within the guide tube, thus preventing its early relocation and oxidation. Rapid oxidation of the absorber melts and remaining boron carbide pellets took place after failure of the protective oxide shell above 1450 deg. C. Only very little methane was produced in these tests which is of interest in fission product gas chemistry because of the production of organic iodine.

  11. Implementation of control rod movement and boron injection options by using control variables in RELAP5/PARCS V2.7 coupled code

    Energy Technology Data Exchange (ETDEWEB)

    Miro, R.; Barrachina, T.; Verdu, G. [Polytechnic University of Valencia (Spain). Chemical and Nuclear Engineering Department], e-mail: rmiro@iqn.upv.es, e-mail: tebarcel@upvnet.upv.es, e-mail: gverdu@iqn.upv.es; Pereira, C. [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Mecanica], e-mail: claubia@nuclear.ufmg.br; Martinez-Murillo, J.C. [CNAT, Madrid (Spain)], e-mail: jcmm@cnat.es

    2009-07-01

    In actual neutron kinetics codes, control rods banks do not have the possibility of dynamic movement during the simulation of a transient; besides it is necessary to send the boron concentration from the thermal-hydraulic code to the neutronic code to account for changes in cross-sections due to boron dilution. For instance, control rod movements are pre-programmed with simple instructions introduced before the beginning of the calculation. Hence, control rod positions are not related to the core characteristics and the control systems at any time of the simulation. This work presents the changes introduced in RELAP5/PARCS v2.7 codes to achieve that control rods and the boron injection become more dynamic and realistic components in such kind of simulators (author)

  12. Current status and Future Works in Dynamic Control Rod Worth Measurement Method in KOREA

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eun-ki; Shin, Ho-chul [Korea Hydro Nuclear Power Co. Central Research Inst, Daejeon (Korea, Republic of)

    2015-10-15

    Actually all ex-core detector signal data processing and extracting the final conclusion about the single control bank was performed by the 3rd generation of Digital Reactivity Computer System (DRCS). From 2006 to 2016, about 250 control bank worths were measured and the difference between measured and calculated worth of individual bank were several % and total rod worth differences of each cycle were less than 3%. However there were a few odd cases showing the individual difference greater than 15% which is the criteria. And some OPR1000 nuclear power plants built recently use fission chambers instead of traditional uncompensated ion chambers. To consider those conditions, any modification of the DCRM method and DRCS were requested. In this paper, short description about DCRM method, current status of DCRM modification and future works are discussed. About 10 cases among about 250 control bank worth measurement with original DCRM method with UIC signals result in very heavy fluctuation on reactivity curve and the difference approaches 15%, the individual limit. The electrometer signals processing method were the main cause. To overcome this problem, a modified reactivity computer system using own current treatment logic was designed. It shows the reactivity fluctuation can be reduced dramatically in case of UIC signal. Recently the modified DRCS coupled INVESE code applied Westinghouse 2 Loop plant and gave very good results except a control bank whose measured rod worth was shown of 18% difference from the estimated value. The results were same for three repeat tests. All possible causes are examined from computer codes to detail data acquisition system.

  13. The co-chaperone and reductase ERdj5 facilitates rod opsin biogenesis and quality control.

    Science.gov (United States)

    Athanasiou, Dimitra; Bevilacqua, Dalila; Aguila, Monica; McCulley, Caroline; Kanuga, Naheed; Iwawaki, Takao; Chapple, J Paul; Cheetham, Michael E

    2014-12-15

    Mutations in rhodopsin, the light-sensitive protein of rod cells, are the most common cause of autosomal dominant retinitis pigmentosa (ADRP). Many rod opsin mutations, such as P23H, lead to misfolding of rod opsin with detrimental effects on photoreceptor function and viability. Misfolded P23H rod opsin and other mutations in the intradiscal domain are characterized by the formation of an incorrect disulphide bond between C185 and C187, as opposed to the correct and highly conserved C110-C187 disulphide bond. Therefore, we tested the hypothesis that incorrect disulphide bond formation might be a factor that affects the biogenesis of rod opsin by studying wild-type (WT) or P23H rod opsin in combination with amino acid substitutions that prevent the formation of incorrect disulphide bonds involving C185. These mutants had altered traffic dynamics, suggesting a requirement for regulation of disulphide bond formation/reduction during rod opsin biogenesis. Here, we show that the BiP co-chaperone and reductase protein ERdj5 (DNAJC10) regulates this process. ERdj5 overexpression promoted the degradation, improved the endoplasmic reticulum mobility and prevented the aggregation of P23H rod opsin. ERdj5 reduction by shRNA delayed rod opsin degradation and promoted aggregation. The reductase and co-chaperone activity of ERdj5 were both required for these effects on P23H rod opsin. Furthermore, mutations in these functional domains acted as dominant negatives that affected WT rod opsin biogenesis. Collectively, these data identify ERdj5 as a member of the proteostasis network that regulates rod opsin biogenesis and supports a role for disulphide bond formation/reduction in rod opsin biogenesis and disease.

  14. ROBUST CONTROL OF AN ELECTRO-HYDRAULIC PROPORTIONAL SPEED CONTROL SYSTEM WITH A SINGLE-ROD HYDRAULIC ACTUATOR

    Institute of Scientific and Technical Information of China (English)

    Yang Jian; Xu Bing; Yang Huayong

    2005-01-01

    A robust control algorithm is proposed to focus on the non-linearity and parameters'uncertainties of an electro-hydraulic proportional speed control system (EHPSCS) with a single-rod hydraulic actuator. The robust controller proposed does not need to design stable compensator in advance, is simple in design and has large scope of uncertainty applications. The feedback gains of the robust controller proposed are small, so it is easily implemented in engineering applications.Experimental research on the speed control under the different conditions is carried out for an EHPSCS. Experimental results show that the robust controller proposed has better robustness subject to parametric uncertainties, and adaptability of parameters' variation of control system itself and plant parameter variation.

  15. Qualification test of the EPR control rod drive mechanism in the full scale component test facility KOPRA

    Energy Technology Data Exchange (ETDEWEB)

    Herr, Wolfgang; Sykora, Alexander; Kleideiter, Ansgar [AREVA NP GmbH, Erlangen (Germany); Champomier, Francois [AREVA NP SAS, Paris (France)

    2009-07-01

    The control rod drive mechanism (CRDM) and the mobile set consisting of rod cluster control assembly (RCC-A) of the evolutionary power reactor (EPR) had to pass a full scale qualification test in representative site conditions. The KOPRA core test section in Erlangen is precisely designed for full scale tests on nuclear core components in respect to coolant temperature and volume flow of PWR site conditions. In the test channel the complete geometry of the central core position of the reactor pressure vessel is simulated with 1:1 scale. The performance test program has led to an optimized test sequence through small adjustments in operating parameters of CRDM. The endurance test program has demonstrated that all tested components, i.e. the CRDN, the control rod driveline and the components of the drop channel are able to function properly and to meet the specification goals.

  16. 3D positional control of magnetic levitation system using adaptive control: improvement of positioning control in horizontal plane

    Science.gov (United States)

    Nishino, Toshimasa; Fujitani, Yasuhiro; Kato, Norihiko; Tsuda, Naoaki; Nomura, Yoshihiko; Matsui, Hirokazu

    2012-01-01

    The objective of this paper is to establish a technique that levitates and conveys a hand, a kind of micro-robot, by applying magnetic forces: the hand is assumed to have a function of holding and detaching the objects. The equipment to be used in our experiments consists of four pole-pieces of electromagnets, and is expected to work as a 4DOF drive unit within some restricted range of 3D space: the three DOF are corresponding to 3D positional control and the remaining one DOF, rotational oscillation damping control. Having used the same equipment, Khamesee et al. had manipulated the impressed voltages on the four electric magnetics by a PID controller by the use of the feedback signal of the hand's 3D position, the controlled variable. However, in this system, there were some problems remaining: in the horizontal direction, when translating the hand out of restricted region, positional control performance was suddenly degraded. The authors propose a method to apply an adaptive control to the horizontal directional control. It is expected that the technique to be presented in this paper contributes not only to the improvement of the response characteristic but also to widening the applicable range in the horizontal directional control.

  17. Internal Leakage Fault Detection and Tolerant Control of Single-Rod Hydraulic Actuators

    Directory of Open Access Journals (Sweden)

    Jianyong Yao

    2014-01-01

    Full Text Available The integration of internal leakage fault detection and tolerant control for single-rod hydraulic actuators is present in this paper. Fault detection is a potential technique to provide efficient condition monitoring and/or preventive maintenance, and fault tolerant control is a critical method to improve the safety and reliability of hydraulic servo systems. Based on quadratic Lyapunov functions, a performance-oriented fault detection method is proposed, which has a simple structure and is prone to implement in practice. The main feature is that, when a prescribed performance index is satisfied (even a slight fault has occurred, there is no fault alarmed; otherwise (i.e., a severe fault has occurred, the fault is detected and then a fault tolerant controller is activated. The proposed tolerant controller, which is based on the parameter adaptive methodology, is also prone to realize, and the learning mechanism is simple since only the internal leakage is considered in parameter adaptation and thus the persistent exciting (PE condition is easily satisfied. After the activation of the fault tolerant controller, the control performance is gradually recovered. Simulation results on a hydraulic servo system with both abrupt and incipient internal leakage fault demonstrate the effectiveness of the proposed fault detection and tolerant control method.

  18. The differential characteristics of control rods of VVER-1000 core simulator at a low number of axial mesh points

    Science.gov (United States)

    Bolsunov, A. A.; Karpov, S. A.

    2013-12-01

    An algorithm for refining the differential characteristics of the control rods (CRs) of the control and protection system (CPS) for a neutronics model of the VVER-1000 simulator at a low number of axial mesh points of the core is described. The problem of determining the constants for a cell with a partially inserted CR is solved. The cell constants obtained using the proposed approach ensure smoothing of the differential characteristics of an absorbing rod. The algorithm was used in the VVER-1000 simulators (Bushehr NPP, unit no. 1; Rostov NPP, unit no. 1; and Balakovo NPP, unit no. 4).

  19. Controlled fabrication of individual silicon quantum rods yielding high intensity, polarized light emission

    Science.gov (United States)

    Bruhn, Benjamin; Valenta, Jan; Linnros, Jan

    2009-12-01

    Elongated silicon quantum dots (also referred to as rods) were fabricated using a lithographic process which reliably yields sufficient numbers of emitters. These quantum rods are perfectly aligned and the vast majority are spatially separated well enough to enable single-dot spectroscopy. Not only do they exhibit extraordinarily high linear polarization with respect to both absorption and emission, but the silicon rods also appear to luminesce much more brightly than their spherical counterparts. Significantly increased quantum efficiency and almost unity degree of linear polarization render these quantum rods perfect candidates for numerous applications.

  20. Control of Prestressing Force in Rod for Reducing Bending in Beams

    Science.gov (United States)

    Wong, M. B.

    2010-05-01

    This paper presents a method to determine the prestressing force required in a rod for reducing the bending effects in a beam. The rod is positioned underneath the beam such that the prestressing force is counteracting the effects of beam bending. It has been found that the prestressing force may also increase the bending as a result of P-δ effect. Therefore, the choice of both the prestressing force and the rod eccentricity from the beam axis is important in determining the appropriate actions to resist the bending of the beam. Over-prestressing the rod may even induce bending or buckling failure in the beam in the reverse direction.

  1. Feedback Control of Plasma Current and Horizontal Position in HT-7

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    There is a strong magnetic coupling between poloidal field coils of superconducting tokamak HT-7, especially between ohinic heating and vertical field coils. These coils are connected to individual power supply. The control system for the plasma current and horizontal position control has been designed and showed satisfactory results with the feedback control of multivariable feedforward-decoupling and var-parameter PID controller to simultaneously modulate power supplies. The design and analysis of the control system is presented.

  2. Research relative to an advanced rod control system for quadrupole mass spectrometry applications

    Science.gov (United States)

    Carignan, George R.

    1987-01-01

    The design of a suitable amplifier output stage using available transistors and passive components is summarized. All of the analysis and calculation confirm that it is feasible to design the amplifier and quadrupole coupling circuit needed for the Advanced Rod Control System. The progress obtained so far concerning the three frequency tank circuits to be used in the oscillator for the mass spectrometer of the Cometary Rendezvous Asteroid Flyby (CRAF) project is presented. Results from this study look promising. However, it is not known what minimum impedance levels are required to make it possible for the oscillator to work properly. Therefore, it is necessary to construct a prototype circuit in the laboratory which can be measured and tested in an oscillator circuit. Continued attempts will be made to develop a useful inductor motor with better characteristics than the one being used at the moment. It is important that such a model be found if computer simulation is to reflect reality more closely.

  3. OPR1000 Control Rod Drop Accident Simulation using the SPACE Code

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Chang Keun; Ha, Sang Jun; Moon, Chan Kook [Korea Hydro and Nuclear Power, Daejeon (Korea, Republic of)

    2012-05-15

    The Korea nuclear industry has developed a best estimated two-phase three-filed thermal-hydraulic analysis code, SPACE (Safety and Performance Analysis Code for Nuclear Power Plants), for safety analysis and design of a PWR (Pressurized Water Reactor). As the first phase, the demo version of the SPACE code was released in March 2010. The code has been verified and improved according to the Validation and Verification (V and V) matrix prepared for the SPACE code as the second phase of the development. In this study, a Control Rod Drop accident has been simulated using the SPACE code as one aspect of the V and V work. The results from this test were compared with tests of the RETRAN and CESEC codes

  4. Analysis of high burnup fuel behavior under control rod ejection accident in Korea standard nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chan Bok; Lee, Chung Chan; Kim, Oh Hwan; Kim, Jong Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-07-01

    Test results of high burnup fuel behavior under RIA(reactivity insertion accident) indicated that fuel might fail at the fuel enthalpy lower than that in the current fuel failure criteria was derived by the conservative assumptions and analysis of fuel failure mechanisms, and applied to the analysis of control rod ejection accident in the 1,000 MWe Korea standard PWR. Except that three dimensional core analysis was performed instead of conventional zero dimensional analysis, all the other conservative assumptions were kept. Analysis results showed that less than on percent of the fuel rods in the core has failed which was much less than the conventional fuel failure fraction, 9.8 %, even though a newly derived fuel failure criteria -Fuel failure occurs at the power level lower than that in the current fuel failure criteria. - was applied, since transient fuel rod power level was significantly decreased by analyzing the transient fuel rod power level was significantly decreased by analyzing the transient core three dimensionally. Therefore, it can be said that results of the radiological consequence analysis for the control rod ejection accident in the FSAR where fuel failure fraction was assumed 9.8 % is still bounding. 18 tabs., 48 figs., 39 refs. (Author).

  5. Testing and qualification of Control and Safety Rod and its drive mechanism of Fast Breeder Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Rajan Babu, V., E-mail: vrb@igcar.gov.i [Indira Gandhi Centre for Atomic Research, Department of Atomic Energy, Kalpakkam 603 102 (India); Veerasamy, R.; Patri, Sudheer; Ignatius Sundar Raj, S.; Kumar Krovvidi, S.C.S.P.; Dash, S.K.; Meikandamurthy, C.; Rajan, K.K.; Puthiyavinayagam, P.; Chellapandi, P.; Vaidyanathan, G.; Chetal, S.C. [Indira Gandhi Centre for Atomic Research, Department of Atomic Energy, Kalpakkam 603 102 (India)

    2010-07-15

    Prototype Fast Breeder Reactor (PFBR) has two independent fast acting diverse shutdown systems. The absorber rod of the first system is called Control and Safety Rod (CSR). CSR and its Drive Mechanism (CSRDM) are used for reactor control and for safe shutdown of the reactor by scram action. In view of the safety role, the qualification of CSRDM is one of the important requirements. CSR and CSRDM were qualified in two stages by extensive testing. In the first stage, the critical subassemblies of the mechanism, such as scram release electromagnet, hydraulic dashpot and dynamic seals and CSR subassembly, were tested and qualified individually simulating the operating conditions of the reactor. Experiments were also carried out on sodium vapour deposition in the annular gaps between the stationary and mobile parts of the mechanism. In the second stage, full-scale CSRDM and CSR were subjected to all the integrated functional tests in air, hot argon and subsequently in sodium simulating the operating conditions of the reactor and finally subjected to endurance tests. Since the damage occurring in CSRDM and CSR is mainly due to fatigue cycles during scram actions, the number of test cycles was decided based on the guidelines given in ASME, Section III, Div. 1. The results show that the performance of CSRDM and CSR is satisfactory. Subsequent to the testing in sodium, the assemblies having contact with liquid sodium/sodium vapour were cleaned using CO{sub 2} process and the total cleaning process has been established, so that the mechanism can be reused in sodium. The various stages of qualification programmes have raised the confidence level on the performance of the system as a whole for the intended and reliable operation in the reactor.

  6. Heat Removal Performance of Hybrid Control Rod for Passive In-Core Cooling System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyung Mo; Jeong, Yeong Shin; Kim, In Guk; Bang, In Cheol [UNIST, Ulsan (Korea, Republic of)

    2015-10-15

    The two-phase closed heat transfer device can be divided by thermosyphon heat pipe and capillary wicked heat pipe which uses gravitational force or capillary pumping pressure as a driving force of the convection of working fluid. If there is a temperature difference between reactor core and ultimate heat sink, the decay heat removal and reactor shutdown is possible at any accident conditions without external power sources. To apply the hybrid control rod to the commercial nuclear power plants, its modelling about various parameters is the most important work. Also, its unique geometry is coexistence of neutron absorber material and working fluid in a cladding material having annular vapor path. Although thermosyphon heat pipe (THP) or wicked heat pipe (WHP) shows high heat transfer coefficients for limited space, the maximum heat removal capacity is restricted by several phenomena due to their unique heat transfer mechanism. Validation of the existing correlations on the annular vapor path thermosyphon (ATHP) which has different wetted perimeter and heated diameter must be conducted. The effect of inner structure, and fill ratio of the working fluid on the thermal performance of heat pipe has not been investigated. As a first step of the development of hybrid heat pipe, the ATHP which contains neutron absorber in the concentric thermosyphon (CTHP) was prepared and the thermal performance of the annular thermosyphon was experimentally studied. The heat transfer characteristics and flooding limit of the annular vapor path thermosyphon was studied experimentally to model the performance of hybrid control rod. The following results were obtained: (1) The annular vapor path thermosyphon showed better evaporation heat transfer due to the enhanced convection between adiabatic and condenser section. (2) Effect of fill ratio on the heat transfer characteristics was negligible. (3) Existing correlations about flooding limit of thermosyphon could not reflect the annular vapor

  7. Nuclear Data Library Effects on Fast to Thermal Flux Shapes Around PWR Control Rod Tips

    Science.gov (United States)

    Vasiliev, A.; Ferroukhi, H.; Zhu, T.; Pautz, A.

    2014-04-01

    The development of a high-fidelity computational scheme to estimate the accumulated fluence at the tips of PWR control rods (CR) has been initiated at the Paul Scherrer Institut (PSI). Both the fluence from high-energy (E>1 MeV) neutrons as well as for the thermal range (E<0.625 eV) are required as these affect the CR integrity through stresses/strains induced by coupled clad embrittlement / absorber swelling phenomena. The concept of the PSI scheme under development is to provide from validated core analysis models, the volumetric neutron source to a full core MCNPX model that is then used to compute the neutron fluxes. A particular aspect that needs scrutiny is the ability of the MCNPX-based calculation methodology to accurately predict the flux shapes along the control rod surfaces, especially for fully withdrawn CRs. In that case, the tip is located a short distance above the core/reflector interface and since this situation corresponds to a large part of reactor operation, the accumulated fluence will highly depend on the achieved calculation accuracy and precision in this non-fueled zone. The objective of the work presented in this paper is to quantify the influence of nuclear data on the calculated fluxes at the CR tips by (1) conducting a systematic comparison of modern neutron cross-section libraries, including JENDL-4.0, JEFF-3.1.1 and ENDF/B-VII.0, and (2) by quantifying the uncertainties in the neutron flux calculations with the help of available neutron cross-section variances/covariances data. For completeness, the magnitude of these nuclear data-based uncertainties is also assessed in relation to the influence from other typical sources of modeling uncertainties/biases.

  8. 65Mn 高线盘条控制冷却工艺参数选择%PROCESS SELECTION FORM CONTROLLED COOLING OF 65Mn COIL ROD BY HIGHSPEED ROD MILL

    Institute of Scientific and Technical Information of China (English)

    赵时腾

    2001-01-01

    对 65Mn 高线盘条控制冷却工艺参数进行了优化,使其获得较好的金相组织和力学性能,在制造弹簧时可省掉铅淬火工序。%To optimize a process parameter of controlled cooling for 65Mn coil rod by high-speed rod mill makes to obtain qualified microstructure and mechanical property.A lead quench can not need when to produce springs with the coil rod.

  9. Estratégia intersetorial para o controle da dengue em Belo Horizonte (Minas Gerais, Brasil An intersectoral strategy for dengue control in Belo Horizonte (Minas Gerais, Brazil

    Directory of Open Access Journals (Sweden)

    Rosiene Maria de Freitas

    2011-09-01

    Full Text Available Os altos índices larvários e a complexidade dos fatores ambientais relacionados à proliferação e sobrevivência do Aedes aegypti levaram a Prefeitura de Belo Horizonte a adotar políticas integradas e agregar parceiros para a definição de ações que possibilitem resultados mais efetivos no controle da dengue, instituindo o Grupo Executivo para o Controle da Dengue - GECD. Esse artigo traz um estudo descritivo que analisa os documentos do GECD - atas, relatórios, avaliações - e descreve as intervenções, em 2007 e 2008, resultantes em: mutirões de limpeza; mobilização da sociedade civil; intensificação de ações de fiscalização; atividades em escolas; comunicação; articulação com empresas privadas, órgãos estaduais e federais; assistência. A experiência de Belo Horizonte, com o fortalecimento do espaço interno de discussão, possibilitou a tomada de decisões de forma mais ágil e o avanço na implementação das ações de prevenção e controle. Possibilitou a emergência de questões e desafios a serem enfrentados para o desenvolvimento da gestão intersetorial no controle da dengue.The high larvae rates found in the city of Belo Horizonte (Southeastern Brazil and the complexity of environmental factors related to Aedes aegypti proliferation and survival led the municipal government authorities to adopt integrated policies and add partners to define effective actions for dengue control, establishing in 2007 the Executive Group for Dengue Control - GECD. This paper offers a descriptive study which analyzes the documents of GECD - reports, minutes, evaluations - and describes interventions in the years of 2007 and 2008 that resulted in: cleaning efforts; civil society mobilization; surveillance activities intensification; activities in schools; conjunction with private companies, state and federal bureaus; health care; and media. Belo Horizonte's experience, with the strengthening of internal groups for discussion

  10. General shape control of colloidal CdS, CdSe, CdTe quantum rods and quantum rod heterostructures.

    Science.gov (United States)

    Shieh, Felice; Saunders, Aaron E; Korgel, Brian A

    2005-05-12

    We report a general synthetic method for the formation of shape-controlled CdS, CdSe and CdTe nanocrystals and mixed-semiconductor heterostructures. The crystal growth kinetics can be manipulated by changing the injection rate of the chalcogen precursor, allowing the particle shape-spherical or rodlike-to be tuned without changing the underlying chemistry. A single injection of precursor leads to isotropic spherical growth, whereas multiple injections promote epitaxial growth along the length of the c-axis. This method was extended to produce linear type I and type II semiconductor nanocrystal heterostructures.

  11. Temporal control of drug release from biodegradable polymer: multicomponent diclofenac sodium releasing PLGA 80/20 rod.

    Science.gov (United States)

    Nikkola, Lila; Viitanen, Petrus; Ashammakhi, Nureddin

    2009-05-01

    In our previous studies we have reported on the development of diclofenac sodium (DS) releasing rods. However, their drug release profiles were unsatisfactory. To enhance the drug release properties of the implant, we have developed a system whereby various elements can be combined into one implant. Melt extruded, self-reinforced (SR), and sterilized (S) DS-containing SR-PLGA 80/20 billets were combined to produce multicomponent implants with various compositions. These components were basically heat pressed together to form multicomponent rods. Drug release from single component and multicomponent rods was defined using a UV-Vis spectrophotometer. DS was released from individual components within 82-111 days and from multicomponent rods within 50-70 days. Thermal properties were analyzed using differential scanning calorimetry (DSC). The melting temperature (T(m)) of multicomponent implants was about 157 degrees C, change in heat fusion (DeltaH) was 13.3 J/g, and the glass transition temperature (T(g)) was 55.4 degrees C. Mechanical strength was measured for 2 weeks and it decreased from 55 to 15 MPa. In conclusion, by compression molding three components with different release rates it is possible to control the temporal release from multicomponent rods. Released DS concentrations were within range for 49-74 days depending on the fractions of individual components used.

  12. Growth control of ZnO nano-rod with various seeds and photovoltaic application

    Science.gov (United States)

    Seo, Hyunwoong; Wang, Yuting; Uchida, Giichiro; Kamataki, Kunihiro; Itagaki, Naho; Koga, Kazunori; Shiratani, Masaharu

    2013-06-01

    ZnO has attracted much interesting as one of unique materials. Especially, it is suitable for the easy fabrication of nano-structures such as rod, wire and tube as well as particles. ZnO nano-rod is one of good sensitized electrodes because it has good electron transfer and is easily fabricated. In the chemical bath deposition process, seed layer plays an important role in the growth of nano-rod. This work investigated and analyzed the effect of seed layer on the growth of ZnO nano-rod. Fabricated nano-rods were applied to dye-sensitized solar cell. For better performance, ZnO was surface-modified by TiO2. Surface-modified ZnO had improved electron transfer and wider surface area. Consequently, the current and fill factor were much improved and overall performance was also enhanced with them.

  13. Electromagnet Tests on Primary Control Rod Drive Mechanism of a Prototype Gen-IV SFR

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jaehan; Koo, Gyeonghoi [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    The primary control system is used for power control, burn-up compensation and reactor shutdown in response to demands from the plant control or protection systems. This paper describes the lifting and holding force tests of the electromagnetic equipment of a primary control rod drive mechanism (CRDM). The supply currents above 1.5 A and 15A on coil are required for holding the CRA with a 1mm gap, and lifting the CRA with 10mm gap, respectively. The currents cover all the loads to be expected in driveline. The S10C carbon steel can be replaced with the SS410 stainless steel by increasing the supply current about 30%. The assist spring, pushing down the tension tube with a compressed force, plays an important role when the operation load is smaller than 20kgf. The spring force can cease a time delay on the free drop of the tension tube carrying a light driving mass because a residual electromagnetic force may exist for a while even though the supply power is cut off. The holding current can be reduced by closing the gap size of 1mm between inner core and armature.

  14. Activation calculation of steel of the control rods of TRIGA Mark III reactor; Calculo de activacion del acero de las barras de control del reactor TRIGA Mark III

    Energy Technology Data Exchange (ETDEWEB)

    Garcia M, T.; Cruz G, H. S.; Ruiz C, M. A.; Angeles C, A., E-mail: teodoro.garcia@inin.gob.mx [ININ, Carretera Mexico-Toluca sn, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    In the pool of TRIGA Mark III reactor of the Instituto Nacional de Investigaciones Nucleares (ININ), there are control rods that were removed from the core, and which are currently on shelves of decay. These rods were part of the reactor core when only had fuel standard (from 1968-1989). To conduct a proper activation analysis of the rods, is very important to have well-characterized the materials which are built, elemental composition of the same ones, the atomic densities and weight fractions of the elements that constitute them. To determine the neutron activation of the control rods MCNP5 code was used, this code allows us to have well characterized the radionuclides inventory that were formed during irradiation of the control rods. This work is limited to determining the activation of the steel that is part of the shielding of the control rods, the nuclear fuel that is in the fuel follower does not include. The calculation model of the code will be validated with experimental measurements and calculating the activity of fission products of the fuel follower which will take place at the end of 2014. (Author)

  15. Modeling of Phenix End-of-Life control rod withdrawal benchmark with DYN3D SFR version

    Energy Technology Data Exchange (ETDEWEB)

    Nikitin, Evgeny; Fridman, Emil [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Reactor Safety

    2017-06-01

    The reactor dynamics code DYN3D is currently under extension for Sodium cooled Fast Reactor applications. The control rod withdrawal benchmark from the Phenix End-of-Life experiments was selected for verification and validation purposes. This report presents some selected results to demonstrate the feasibility of using DYN3D for steady-state Sodium cooled Fast Reactor analyses.

  16. Experimental investigation on the suppression of vortex-induced vibration of long flexible riser by multiple control rods

    Science.gov (United States)

    Wu, H.; Sun, D. P.; Lu, L.; Teng, B.; Tang, G. Q.; Song, J. N.

    2012-04-01

    Experimental investigations were conducted to evaluate the vortex-induced vibration (VIV) suppression for slender riser (length to diameter ratio L/D=1750) using multiple control rods. The uniform current was obtained by towing the riser model running in a wave basin, giving the Reynolds numbers ranging from 2400 to 7600. Four control rods with diameter d=0.25D were placed parallel to the riser model with uniform angle interval of 90°. Different spacing ratios δ/D=0.187, 0.375 and 0.562 and coverage rates Lc/L=80%, 60%, 40% and 20% were considered, where δ is the spacing distance, Lc is the covered length. The strain responses in both cross-flow (CF) and in-line (IL) directions were measured by 56 Fiber Bragg Grating sensors. The experimental results show that the multiple control rods perform well in mitigating the VIV. In general the smaller spacing ratio and the larger coverage rates give rise to the better VIV suppression for the CF response, while the IL response is not sensitive to the δ/D and Lc/L. The optimal parameters are suggested to be δ/D≤0.375 and Lc/L≈60%. The monitored end tension of the riser model was observed to increase slightly due to the presence of control rods.

  17. Control rod drop analysis by finite element method using fluid-structure interaction for a pressurized water reactor power plant

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, K.H. [Korea Atomic Energy Research Institute, Daedukdaero 1045 Dukjin-Dong, Yusong-Ku, Daejeon 305-353 (Korea, Republic of)], E-mail: khyoon@kaeri.re.kr; Kim, J.Y.; Lee, K.H.; Lee, Y.H.; Kim, H.K. [Korea Atomic Energy Research Institute, Daedukdaero 1045 Dukjin-Dong, Yusong-Ku, Daejeon 305-353 (Korea, Republic of)

    2009-10-15

    The control rod drop analysis is very important for safety analysis. For seismic and loss of coolant accident event, the control rod assemblies shall be capable of traveling from a fully withdrawn position to 90% insertion without any blockage and within specified time and displacement limits. The analysis has been executed by analytical method using in-house code. In this method, several field data are needed. These data are obtained from nuclear, thermal-hydraulic and mechanical design groups, peculiar codes, those work groups need to cooperate together. Following the enhancement of a computer and development of the multi-physics analysis code, a new method for the control rod drop analysis is proposed by finite element method. This analysis model incorporates the structure and fluid parts, termed as a fluid and structure interaction (FSI). Because a control rod is submerged inside a guide tube of a fuel assembly, the FSI boundary condition is applied. In this model, it is assumed that the fluid is incompressible laminar flow. The structures are modeled with the solid elements because there is no deformation due to the fluid flow. The analysis two-dimensional plane model is created in the analysis with considering an axi-symmetric geometry. Therefore, the proposed analysis model will be very simple and the design data from other fields will be unnecessary. The analysis results are compared with those of the in-house code, which have been used for a commercial design. After validation, it is found that the present analysis gives a useful tool in the design of the control rod and fuel assembly.

  18. Design of High Precision Horizontal Control Network for Large-Scale Hydropower Project

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhenglu; LUO Changlin; DENG Yong; XIE Niansheng

    2006-01-01

    A new solution of combination network of GPS and high precise distance measurements with EDM is proposed. Meanwhile, it's inadvisable only using GPS network without distance measurements. Three schemes: terrestrial network, GPS network and combination network are discussed for horizontal control network design of Xiangjiaba Dam in view of precision, reliability, coordinate and outlay in detail.

  19. Effective parameter study for the facile and controlled growth of silver molybdate nano/micro rods

    Science.gov (United States)

    Montenegro, Javier Esteban Enríquez; Singh, Dinesh Pratap

    2016-11-01

    Controlled growth of nano/micro structures by controlling the effective parameters is the basic requirement for the application point of view in various areas. Here we report the facile growth of silver molybdate nano/micro rods by mixing the solution of silver nitrate and ammonium molybdate at ambient condition followed by hydrothermal treatment at various temperatures for 12 h. To achieve the goal for the synthesis of long, high yield and homogeneous nanorods various effective parameters have been studied to set the most effective conditions for the growth. Among possible effective parameters first the temperature of the furnace was set by warring the temperature and then at the set temperature the concentration of reactants (NH4)6Mo7O24 and silver nitrate are varied respect to each other. The pH and temperature values were monitored during the mixing of the reactants. Structural/microstructural characterization revealed the optimum condition of 150°C of the furnace and the concentration of (NH4)6Mo7O24 and silver nitrate as described in various tables.

  20. Thermo-Mechanical Analysis of Coated Particle Fuel Experiencing a Fast Control Rod Ejection Transient

    Energy Technology Data Exchange (ETDEWEB)

    Ortensi, J.; Brian Boer; Abderrafi M. Ougouag

    2010-10-01

    A rapid increase of the temperature and the mechanical stress is expected in TRISO coated particle fuel that experiences a fast Total Control Rod Ejection (CRE) transient event. During this event the reactor power in the pebble bed core increases significantly for a short time interval. The power is deposited instantly and locally in the fuel kernel. This could result in a rapid increase of the pressure in the buffer layer of the coated fuel particle and, consequently, in an increase of the coating stresses. These stresses determine the mechanical failure probability of the coatings, which serve as the containment of radioactive fission products in the Pebble Bed Reactor (PBR). A new calculation procedure has been implemented at the Idaho National Laboratory (INL), which analyzes the transient fuel performance behavior of TRISO fuel particles in PBRs. This early capability can easily be extended to prismatic designs, given the availability of neutronic and thermal-fluid solvers. The full-core coupled neutronic and thermal-fluid analysis has been modeled with CYNOD-THERMIX. The temperature fields for the fuel kernel and the particle coatings, as well as the gas pressures in the buffer layer, are calculated with the THETRIS module explicitly during the transient calculation. Results from this module are part of the feedback loop within the neutronic-thermal fluid iterations performed for each time step. The temperature and internal pressure values for each pebble type in each region of the core are then input to the PArticle STress Analysis (PASTA) code, which determines the particle coating stresses and the fraction of failed particles. This paper presents an investigation of a Total Control Rod Ejection (TCRE) incident in the 400 MWth Pebble Bed Modular reactor design using the above described calculation procedure. The transient corresponds to a reactivity insertion of $3 (~2000 pcm) reaching 35 times the nominal power in 0.5 seconds. For each position in the core

  1. Field dependence and verbalized strategies on the portable rod-and-frame test by depressed outpatients and normal controls.

    Science.gov (United States)

    Calamari, E; Pini, M; Puleggio, A

    2000-12-01

    This study examined the relationships between scores on the cognitive style of field dependence-independence and verbalized strategies on the Portable Rod-and-Frame Test for normal and psychopathological outpatients. We attempted to verify (a) Manning's hypothesis (1991) of a correspondence between scores on field dependence and external strategies (reference to the visual field) and scores on field independence and internal strategies (reference to the body) on perceptual tasks, and (b) a tendency of depressed persons to score as field dependent, and (c) use of external verbalized strategies. A total of 50 depressed outpatients and 50 normal controls were administered the test and requested to report the strategy they had employed to solve the problem. Contrary to Manning's findings, no significant relationship was found between cognitive style and verbalized strategies in the total sample. Depressed outpatients classified as internal scored significantly higher on the Group Embedded Figures Test but appeared more field dependent on the Rod-and-Frame Test. Moreover, only for the former test did depressed outpatients score more field-dependent than controls. Finally, no significant relationship was found between the diagnosis of depression and use of external strategies; however, field dependence and the use of external strategies on the Rod-and-Frame Test were associated with more severe depressive symptoms measured by the D scale of the MMPI-2. Further research is needed to assess the role of premorbid personality structures of depression in subjective and objective aspects of Rod-and-Frame Test performance.

  2. A tetrachromatic display for the spatiotemporal control of rod and cone stimulation.

    Science.gov (United States)

    Bayer, Florian S; Paulun, Vivian C; Weiss, David; Gegenfurtner, Karl R

    2015-08-01

    We present an apparatus that allows independent stimulation of rods and short (S)-, middle (M)-, and long (L)-wavelength-sensitive cones. Previously presented devices allow rod and cone stimulation independently, but only for a spatially invariant stimulus design (Pokorny, Smithson, & Quinlan, 2004; Sun, Pokorny, & Smith, 2001b). We overcame this limitation by using two spectrally filtered projectors with overlapping projections. This approach allows independent rod and cone stimulation in a dynamic two-dimensional scene with appropriate resolution in the spatial, temporal, and receptor domains. Modulation depths were ±15% for M-cones and L-cones, ±20% for rods, and ±50% for S-cones, all with respect to an equal-energy mesopic background at 3.4 cd/m2. Validation was provided by radiometric measures and behavioral data from two trichromats, one protanope, one deuteranope, and one night-blind observer.

  3. Assessment of the mechanical performance of the Westinghouse BWR control rod CR 99 at high depletion levels

    Energy Technology Data Exchange (ETDEWEB)

    Seltborg, P.; Jinnestrand, M. [Westinghouse Electric Sweden AB, SE-721 63 Vaesteraas (Sweden)

    2012-07-01

    A long-term program assessing the mechanical performance of the Westinghouse BWR control rod CR 99 at high depletion levels has been performed. The scope of the program has mainly been based on the operation of four CR 99 Generation 2 control rods in demanding positions during 6 and 7 cycles in the Leibstadt Nuclear Power Plant (KKL) and on the detailed visual inspections and blade wing thickness measurements that were performed after the rods were discharged. By correlating statistically the blade wing thickness measurements to the appearance of irradiation-assisted stress corrosion cracking (IASCC), the probability of IASCC appearance as function of the blade wing swelling was estimated. In order to correlate the IASCC probability of a CR 99 to its depletion, the {sup 10}B depletion of the studied rods was calculated in detail on a local level with the stochastic Monte Carlo code MCNP in combination with the Westinghouse nodal code system PHOENIX4/POLCA7. Using this information coupled to the blade wing measurement data, a finite element model describing the blade wing swelling of an arbitrary CR 99 design as function of {sup 10}B depletion could then be generated. In the final step, these relationships were used to quantify the probability of IASCC appearance as function of the {sup 10}B depletion of the CR 99 Generations 2 and 3. Applying this detailed mapping of the CR 99 behavior at high depletion levels and using an on-line core monitoring system with explicit {sup 10}B depletion tracking capabilities will enable a reliable prediction of the probability for IASCC appearance, thus enhancing the optimized design and the sound operation of the CR 99 control rod. Another important outcome of the program was that it was clearly shown that no significant amount of boron leakage did occur through any of the detected IASCC cracks, despite the very high depletion levels achieved. (authors)

  4. Development of a HTSMA-Actuated Surge Control Rod for High-Temperature Turbomachinery Applications

    Science.gov (United States)

    Padula, Santo, II; Noebe, Ronald; Bigelow, Glen; Culley, Dennis; Stevens, Mark; Penney, Nicholas; Gaydosh, Darrell; Quackenbush, Todd; Carpenter, Bernie

    2007-01-01

    In recent years, a demand for compact, lightweight, solid-state actuation systems has emerged, driven in part by the needs of the aeronautics industry. However, most actuation systems used in turbomachinery require not only elevated temperature but high-force capability. As a result, shape memory alloy (SMA) based systems have worked their way to the forefront of a short list of viable options to meet such a technological challenge. Most of the effort centered on shape memory systems to date has involved binary NiTi alloys but the working temperatures required in many aeronautics applications dictate significantly higher transformation temperatures than the binary systems can provide. Hence, a high temperature shape memory alloy (HTSMA) based on NiTiPdPt, having a transformation temperature near 300 C, was developed. Various thermo-mechanical processing schemes were utilized to further improve the dimensional stability of the alloy and it was later extruded/drawn into wire form to be more compatible with envisioned applications. Mechanical testing on the finished wire form showed reasonable work output capability with excellent dimensional stability. Subsequently, the wire form of the alloy was incorporated into a benchtop system, which was shown to provide the necessary stroke requirements of approx.0.125 inches for the targeted surge-control application. Cycle times for the actuator were limited to 4 seconds due to control and cooling constraints but this cycle time was determined to be adequate for the surge control application targeted as the primary requirement was initial actuation of a surge control rod, which could be completed in approximately one second.

  5. Reliability centered maintenance applied to the control rod drives of a nuclear power reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lyytikaeinen, A.; Holmberg, J. (Technical Research Centre of Finland, Espoo (Finland)); Unga, E. (Teollisuuden Voima Oy, Olkiluoto (Finland))

    1990-12-01

    Reliability Centered Maintenance (RCM) offers a hybrid reliability analysis methodology to evaluate the level of maintenance and direct the resources in an effective manner. The RCM analysis consists of several steps, including a Logic Tree Analysis (LTA) for identification of applicable and efficient preventive maintenance task. As a result of the analysis the total amount of maintenance of equipment is decreased or increased, depending on whether the failures are potential having adverse effects on plant safety, availability or economics. A RCM analysis results thus in an improved preventive maintenance program, which is supposed to decrease the maintenance and outage costs and at the same time increase the system safety and reliability. A problem is the relatively large and slow analysis effort, the fact which tends to inhibit the large scale and continuous application of this useful method. A case study is described, in which the control rod equipment at the TVO I/II nuclear units was analyzed and the problematics of the RCM-method is discussed. (au).

  6. Thermal control of rod outer segment length and shedding in a fish, Fundulus zebrinus.

    Science.gov (United States)

    Allen, D M

    1995-08-01

    The effects of temperature on rod outer segment (ROS) length and membrane shedding were studied in a cyprinodont fish, Fundulus zebrinus. After 30 days in 14L/10D cyclic light and 17 degrees C, ROS length averaged 41.2 microns. Fish were then exposed to 7, 17 or 27 degrees C for 10 and 25 days before being sampled 5 hr before and 1-4 hr after light onset. In 7 degrees C ROS shortened to 83.5% of initial controls within 10 days, then only 4.1% further, to 79.4% by day 25 (34.4, 32.7 microns). ROS length did not change significantly in fish remaining at 17 degrees C (39.7 and 40.7 microns at day 10 and 25) or in fish moved to 27 degrees C (41.7 and 41.6 microns). Phagosomes were most numerous in 7 degrees C and least numerous in 17 degrees C, but varied in overall size among the largest phagosomes being more common after light onset. After light onset at day 25, the estimated volume per phagosome was 1.14, 4.73 and 5.75 microns 3 in 7, 17 and 27 degrees C. Total phagosome volume per 100 microns RPE at 27 degrees C was generally double that at 17 degrees C. Apparently, in F. zebrinus, the number of disks shed from ROS is adjusted during thermal acclimation to stabilize ROS length.

  7. Dynamic Simulation of Trapping and Controlled Rotation of a Microscale Rod Driven by Line Optical Tweezers

    Science.gov (United States)

    Haghshenas-Jaryani, Mahdi; Bowling, Alan; Mohanty, Samarendra

    2013-03-01

    Since the invention of optical tweezers, several biological and engineering applications, especially in micro-nanofluid, have been developed. For example, development of optically driven micromotors, which has an important role in microfluidic applications, has vastly been considered. Despite extensive experimental studies in this field, there is a lack of theoretical work that can verify and analyze these observations. This work develops a dynamic model to simulate trapping and controlled rotation of a microscale rod under influence of the optical trapping forces. The laser beam, used in line optical tweezers with a varying trap's length, was modeled based on a ray-optics approach. Herein, the effects of viscosity of the surrounding fluid (water), gravity, and buoyancy were included in the proposed model. The predicted results are in overall agreement with the experimental observation, which make the theoretical model be a viable tool for investigating the dynamic behavior of small size objects manipulated by optical tweezers in fluid environments. This material is based upon work supported by the National Science Foundation under Grant No. MCB-1148541.

  8. A Comparative analysis for control rod drop accident in RETRAN DNB and CETOP DNB Model

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Chang Keun; Kim, Yo Han; Ha, Sang Jun [Korea Electric Power Research Institute, Daejeon (Korea, Republic of)

    2009-10-15

    In Korea, the nuclear industries such as fuel manufacturer, the architect engineer and the utility, have been using the methodologies and codes of vendors, such as Westinghouse(WH), Combustion Engineering, for the safety analyses of nuclear power plants. Consequently the industries have kept up the many organizations to operate the methodologies and to maintain the codes for each vendor. It may occur difficulty to improve the safety analyses efficiency and technology related. So, the necessity another of methodologies and code systems applicable to Non- LOCA, beyond design basis accident and performance analyses for all types of pressurized water reactor(PWR) has been raised. Due to the above reason, the Korea Electric Power Research Institute(KEPRI) had decided to develop the new safety analysis code system for Korea Standard Nuclear Power Plants in Korea. As the first requirement, the best-estimate codes were required for applicable wider application area and realistic behavior prediction of power plants with various and sophisticated functions. After the investigation for few candidates, RETRAN-3D has been chosen as a system analysis code. As a part of the feasibility estimation for the methodology and code system, CRD(Control Rod Drop) accident which an event of Non-LOCA accidents for Uljin units 3 and 4 and Yonggwang 1 and 2 was selected to verify the feasibility of the methodology using the RETRAN-3D. In this paper, RETRAN DNB Model and CETOP DNB Model were analyzed by using comparative method.

  9. Calibrating and Controlling the Quantum Efficiency Distribution of Inhomogeneously Broadened Quantum Rods Using a Mirror Ball

    CERN Document Server

    Lunnemann, Per; van Dijk-Moes, Relinde J A; Pietra, Francesca; Vanmaekelbergh, Daniël; Koenderink, A Femius

    2013-01-01

    We demonstrate that a simple silver coated ball lens can be used to accurately measure the entire distribution of radiative transition rates of quantum dot nanocrystals. This simple and cost-effective implementation of Drexhage's method that uses nanometer-controlled optical mode density variations near a mirror, not only allows to extract calibrated ensemble-averaged rates, but for the first time also to quantify the full inhomogeneous dispersion of radiative and non radiative decay rates across thousands of nanocrystals. We apply the technique to novel ultra-stable CdSe/CdS dot-in-rod emitters. The emitters are of large current interest due to their improved stability and reduced blinking. We retrieve a room-temperature ensemble average quantum efficiency of 0.87+-0.08 at a mean lifetime around 20 ns. We confirm a log-normal distribution of decay rates as often assumed in literature and we show that the rate distribution-width, that amounts to about 30% of the mean decay rate, is strongly dependent on the l...

  10. Estimation of dose rate around the spent control rods of a BWR; Estimacion de la rapidez de dosis alrededor de las barras de control gastadas de un BWR

    Energy Technology Data Exchange (ETDEWEB)

    Cancino P, G.

    2016-10-01

    The energy can come from fossil renewable sources (solar (natural gas, oil), wind, hydro, tidal, geothermal, biomass, bio energy and nuclear. Nuclear power can be obtained by fission reactions and fusion (still under investigation) atomic nuclei. Fission, is a partition of a very heavy nucleus (Uranium 235, for example) into two lighter nuclei. Much of the world's electric power is generated from the energy released by fission processes. In a nuclear power reactor, light water as the BWR, there are many important elements that allow safe driving operation, one of them are the elements or control systems, the burnable poison or neutron absorber inherently allow control power reactor. The control rods, which consist mostly of stainless steel and absorbing elements (such as boron carbide, hafnium, cadmium, among others) of thermal neutrons is able to initiate, regulate or stop the reactor power. These, due to the use of depleted burned or absorbing material and therefore reach their lifespan, which can be 15 years or have other values depending on the manufacturer. Control rods worn should be removed, stored or confined in expressly places. Precisely at this stage arises the importance of knowing their radiological condition to manipulate safely and without incident to the people health responsible for conducting these proceedings state arises. This thesis consists in the estimation of the dose rate in spent control rod made of boron carbide, from a typical BWR reactor. It will be estimated by direct radiation measurements with measurement equipment for radiotherapy ionization chamber, in six spent control rods, which were taken at different reactor operating cycles and are in a spent fuel pool. Using bracket electromechanical and electronic equipment for positioning and lifting equipment for radiation measurement around the control rod in the axial and radial arrangement for proper scanning. Finally will be presented a graphic corresponding to the dose

  11. The Design, Fabrication, and Characteristic Experiment of the Electromagnet of Bottom-mounted Control Rod Drive Mechanism for Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Hyung; Cho, Yeong Garp; Choi, Myoung Hwan; Kim, Ji Ho; Kim, Jong In [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2011-10-15

    A control rod drive mechanism (CRDM) is located in the reactor pool top (Top-mounted) or the room below the reactor pool (Bottom-mounted). The function of the CRDM is to insert, withdraw, or maintain neutron absorbing material at any required position in the reactor core in order to maintain reactivity control of the core. There are so many kinds of CRDMs, such as magnetic-jack type, hydraulic type, rack and pinion type, chain type and linear or rotary step motor and so on. As a part of a new project, we are investigating the bottom-mounted control rod drive mechanism as shown in Fig. 1. To have a better knowledge of the electromagnetic and magnetic characteristics, numerical models of bottom-mounted CEDM are investigated. In this study, we clarified thrust force characteristics of the electromagnet by experiment and simulation, and verified the propriety of the FEM analysis by comparing it with the results

  12. Genetic algorithm based active vibration control for a moving flexible smart beam driven by a pneumatic rod cylinder

    Science.gov (United States)

    Qiu, Zhi-cheng; Shi, Ming-li; Wang, Bin; Xie, Zhuo-wei

    2012-05-01

    A rod cylinder based pneumatic driving scheme is proposed to suppress the vibration of a flexible smart beam. Pulse code modulation (PCM) method is employed to control the motion of the cylinder's piston rod for simultaneous positioning and vibration suppression. Firstly, the system dynamics model is derived using Hamilton principle. Its standard state-space representation is obtained for characteristic analysis, controller design, and simulation. Secondly, a genetic algorithm (GA) is applied to optimize and tune the control gain parameters adaptively based on the specific performance index. Numerical simulations are performed on the pneumatic driving elastic beam system, using the established model and controller with tuned gains by GA optimization process. Finally, an experimental setup for the flexible beam driven by a pneumatic rod cylinder is constructed. Experiments for suppressing vibrations of the flexible beam are conducted. Theoretical analysis, numerical simulation and experimental results demonstrate that the proposed pneumatic drive scheme and the adopted control algorithms are feasible. The large amplitude vibration of the first bending mode can be suppressed effectively.

  13. Controlling chaos based on a novel intelligent integral terminal sliding mode control in a rod-type plasma torch

    Science.gov (United States)

    Safa, Khari; Zahra, Rahmani; Behrooz, Rezaie

    2016-05-01

    An integral terminal sliding mode controller is proposed in order to control chaos in a rod-type plasma torch system. In this method, a new sliding surface is defined based on a combination of the conventional sliding surface in terminal sliding mode control and a nonlinear function of the integral of the system states. It is assumed that the dynamics of a chaotic system are unknown and also the system is exposed to disturbance and unstructured uncertainty. To achieve a chattering-free and high-speed response for such an unknown system, an adaptive neuro-fuzzy inference system is utilized in the next step to approximate the unknown part of the nonlinear dynamics. Then, the proposed integral terminal sliding mode controller stabilizes the approximated system based on Lyapunov’s stability theory. In addition, a Bee algorithm is used to select the coefficients of integral terminal sliding mode controller to improve the performance of the proposed method. Simulation results demonstrate the improvement in the response speed, chattering rejection, transient response, and robustness against uncertainties.

  14. Measuring the efficiency of control rods in the RBMK critical assembly using a model of RKI-1 reactimeter

    Science.gov (United States)

    Zhitarev, V. E.; Lebedev, G. V.; Sergevnin, A. Yu.

    2016-12-01

    The efficiency of control rods of the RBMK critical assembly is measured in a series of experiments. The aim of measurements is to determine the characteristics of the model of an RKI-1 reactimeter. The RKI-1 reactimeter is intended for measuring the efficiency of control rods when, according to conditions of operation, the metrological certification of results of an experiment is required. Complications with the metrological certification of reactimeters arise owing to the fact that usually calculated corrections to the results of measurements are required. When the RKI-1 reactimeter is used, there is no need to introduce calculated corrections; the result of measurements is given with the indication of substantiated errors. In connection with this, the metrological certification of the results of measurements using the RKI-1 reactimeter is simplified.

  15. Calculation of Excore Detector Responses upon Control Rods Movement in PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Pham Nhu Viet; Lee, Min Jae; Kang, Chang Moo; Kim, Sang Ji [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-05-15

    The Prototype Generation-IV Sodium-cooled Fast Reactor (PGSFR) safety design concept, which aims at achieving IAEA's safety objectives and GIF's safety goals for Generation-IV reactor systems, is mainly focused on the defense in depth for accident detection, prevention, control, mitigation and termination. In practice, excore neutron detectors are widely used to determine the spatial power distribution and power level in a nuclear reactor core. Based on the excore detector signals, the reactor control and protection systems infer the corresponding core power and then provide appropriate actions for safe and reliable reactor operation. To this end, robust reactor power monitoring, control and core protection systems are indispensable to prevent accidents and reduce its detrimental effect should one occur. To design such power monitoring and control systems, numerical investigation of excore neutron detector responses upon various changes in the core power level/distribution and reactor conditions is required in advance. In this study, numerical analysis of excore neutron detector responses (DRs) upon control rods (CRs) movement in PGSFR was carried out. The objective is to examine the sensitivity of excore neutron detectors to the core power change induced by moving CRs and thereby recommend appropriate locations to locate excore neutron detectors for the designing process of the PGSFR power monitoring systems. Section 2 describes the PGSFR core model and calculation method as well as the numerical results for the excore detector spatial weighting functions, core power changes and detector responses upon various scenarios of moving CRs in PGSFR. The top detector is conservatively safe because it overestimated the core power level. However, the lower and bottom detectors still functioned well in this case because they exhibited a minor underestimation of core power of less than ∼0.5%. As a secondary CR was dropped into the core, the lower detector was

  16. Ancestral genes can control the ability of horizontally acquired loci to confer new traits.

    Directory of Open Access Journals (Sweden)

    H Deborah Chen

    2011-07-01

    Full Text Available Horizontally acquired genes typically function as autonomous units conferring new abilities when introduced into different species. However, we reasoned that proteins preexisting in an organism might constrain the functionality of a horizontally acquired gene product if it operates on an ancestral pathway. Here, we determine how the horizontally acquired pmrD gene product activates the ancestral PmrA/PmrB two-component system in Salmonella enterica but not in the closely related bacterium Escherichia coli. The Salmonella PmrD protein binds to the phosphorylated PmrA protein (PmrA-P, protecting it from dephosphorylation by the PmrB protein. This results in transcription of PmrA-dependent genes, including those conferring polymyxin B resistance. We now report that the E. coli PmrD protein can activate the PmrA/PmrB system in Salmonella even though it cannot do it in E. coli, suggesting that these two species differ in an additional component controlling PmrA-P levels. We establish that the E. coli PmrB displays higher phosphatase activity towards PmrA-P than the Salmonella PmrB, and we identified a PmrB subdomain responsible for this property. Replacement of the E. coli pmrB gene with the Salmonella homolog was sufficient to render E. coli resistant to polymyxin B under PmrD-inducing conditions. Our findings provide a singular example whereby quantitative differences in the biochemical activities of orthologous ancestral proteins dictate the ability of a horizontally acquired gene product to confer species-specific traits. And they suggest that horizontally acquired genes can potentiate selection at ancestral loci.

  17. A buoyantly-driven shutdown rod concept for passive reactivity control of a Fluoride salt-cooled High-temperature Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Blandford, Edward D., E-mail: edb@unm.edu [Department of Chemical and Nuclear Engineering, University of New Mexico, Albuquerque, NM 87131-0001 (United States); Peterson, Per F. [Department of Nuclear Engineering, University of California, Berkeley, CA 94720-1730 (United States)

    2013-09-15

    Highlights: • We develop a novel buoyantly-driven shutdown rod concept for a FHR. • Shutdown rod system can be actively or passively activated during transients. • Response of the rod was computationally simulated and experimentally validated. • Initial results indicate rod could provide effective transient reactivity control. -- Abstract: This paper presents a novel buoyantly-driven shutdown rod concept for use in Fluoride salt-cooled High-temperature Reactors (FHRs). The baseline design considered here is a 900 MWth modular version of the FHR class called the Pebble Bed Advanced High-Temperature Reactor (PB-AHTR) that uses pebble fuel. Due to the high volumetric heat capacity of the primary coolant, the FHRs operate with a high power density core with a similar average coolant temperature as in modular helium reactors. The reactivity control system for the baseline PB-AHTR uses a novel buoyantly-driven shutdown rod system that can be actively or passively activated during reactor transients. In addition to a traditional active insertion mechanism, the new shutdown rod system is designed to also operate passively, fulfilling the role of a reserve shutdown system. The physical response of the shutdown rod was simulated both computationally and experimentally, using scaling arguments where applicable, with an emphasis on key phenomena identified by a preliminary Phenomena Identification and Ranking Table (PIRT) study. This paper presents results from both the pre-predicted simulation and experimental validation efforts.

  18. Towards a reference numerical scheme using MCNPX for PWR control rod tip fluence estimations

    Energy Technology Data Exchange (ETDEWEB)

    Ferroukhi, H.; Vasiliev, A. [Paul Scherrer Institut, CH-5232 Villigen-PSI (Switzerland); Dufresne, A. [Dept. of Physics, EPFL, 1015 Lausanne (Switzerland); Chawla, R. [Dept. of Physics, EPFL, 1015 Lausanne (Switzerland); Paul Scherrer Institut (Switzerland)

    2012-07-01

    Recent occurrences of cracks and fissures on the cladding tubes of PWR control rod (CR) fingers employed in the Swiss reactors prompted the need to develop more reliable analytical methods for CR tip fluence estimations. To partly address this need, a deterministic methodology based on SIMULATE-3/CASMO-4 was in recent years developed at PSI. Although this methodology has already been applied for independent support to licensing issues related to CR lifetime, two main questions are currently being the center of attention for further enhancements. First, the methodology relies on several assumptions that have so far not been verified. Secondly, an assessment of the achieved accuracy has not been addressed. In an attempt to answer both these open questions, it was considered appropriate to develop an alternative computational scheme based on the stochastic MCNPX code with the objective to provide reference numerical solutions. This paper presents the first steps undertaken in that direction. To start, a methodology for a volumetric neutron source transfer to full core MCNPX models with detailed CR as well as axial reflector representations is established. On this basis, the assumptions of the deterministic methodology are studied for selected CR configurations for two Beginning-of-Life cores by comparing the spatial neutron flux distributions obtained with the two approaches for the entire spectrum. Finally, for the high-energy range (E> 1 MeV) and for a few CRs, the new MCNPX scheme is applied to estimate the accumulated fluence over one real operated cycle and the results are compared with the deterministic approach. (authors)

  19. Thermal Performance of a Heat Pipe for Hybrid Control Rod in Advanced In-core Decay Heat Removal System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyung Mo; Jeong, Yeong Shin; Bang, In Cheol [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

    2014-05-15

    In this research, an innovative hybrid heat pipe system is designed for advanced in-core decay heat removal concept. Heat pipe is a device that transfer heat from pipe's hotter end to the colder end by phase change and convection of working fluid. The concept of the hybrid heat pipe system is that the control rod can have not only the original function of neutron absorber but also the function of the heat removal. If the function of heat pipe is applied to the control rods, the limited heat removal capacity can be extended because control rods are inserted to the reactor at initial state of accident using gravitational force. The neutron absorber-based heat pipe is designed to apply them to nuclear systems. However, thermosyphon and heat pipe are competitive as passive decay heat removal device in large scale. Thus, stainless steel 316L thermosyphon and heat pipe having sheath outer diameter of 3/4 inch (17.4 mm inner diameter), and the length of 1000 mm were tested. Effects on whether there is a wick structure on the heat pipe or not on the heat removal capacity were studied. To confirm the heat removal capacity of heat pipe, and heat transfer coefficient were measured for each specimen.

  20. A Position Estimation Method of the Control Rod Guide Tube with Matched Filters

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae C.; Seop, Jun H.; Choi, Yu R.; Kim, Jae H. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2005-07-01

    which we are looking for in that input image. In addition to the presence of the guide tube and pins, the cross correlation value will have a maximum at the exact position of the object. As a result, we can perform the inspection without any troublesome jobs such as a guide rail installation. We studied this algorithm for applying it to the control rod guide tubes inspection robot and tried an inspection without on operator's intervention.

  1. Robust cascade control for the horizontal motion of a vehicle with single-wheel actuators

    Science.gov (United States)

    Moseberg, Jan-Erik; Roppenecker, Günter

    2015-12-01

    The article presents a cascade control for the horizontal motion of a vehicle with single-wheel actuators. The outer control loop for the longitudinal and lateral accelerations and the yaw rate ensures a desired vehicle motion. By a combination of state feedback control and observer-based disturbance feedforward the inner control loop robustly stabilises the rotating and steering motions of the wheels in spite of unknown frictions between tyres and ground. Since the three degrees of freedom of the horizontal motion are affected by eight tyre forces, the vehicle considered is an over-actuated system. Thus additional control objectives can be realised besides the desired motion trajectory as, for example, a maximum in driving safety. The corresponding analytical tyre force allocation also guarantees real-time capability because of its relatively low computational effort. Provided suitable fault detection and isolation are available, the proposed cascade control has the potential of fault-tolerance, because the force allocation is adaptable. Another benefit results from the modular control structure, because it allows a stepwise implementation. Besides, it only requires a small number of measurements for control purposes. These measurements are the rotational speeds and steering angles of the wheels, the longitudinal and lateral acceleration and the yaw rate of the vehicle.

  2. Determination Of Horizontal Geodetic Control Networks For Engineering Objects Using Optoelectronic Techniques

    Directory of Open Access Journals (Sweden)

    Ćmielewski Kazimierz

    2015-07-01

    Full Text Available The correctness of the geodetic service of an engineering object not seldom requires designing, alignment or renewing of geodetic situational control points. Building robots often cause that fixed situational control points are partly or completely inaccessible. For setting the position of these control points, there is worked out the methodology using the optoelectronic method. The prepared set of tools realizes the method’s assumptions and enables to determine the sides and control points based on the set of laser planes. In this article there is presented the innovative set of geodetic equipment for fixing horizontal control points. The presented set has been experimentally tested under laboratory conditions taking its functionality, operation range and applied accuracy into account. The measurement accuracy of the set of tools, resulting from identification of the energetic centres of laser planes’ edges, visualizing the sides of geodetic control networks, is within the range of ±0.02mm - ±0.05mm. There were also discussed exemplary versions of shapes and structures of horizontal geodetic control networks (regular and irregular, which are possible to be fixed with the use of the constructed set of tools.

  3. Realization of wide size range 1D ZnO micro/nano rods for versatile micro/nano devices by controlled seed layer thickness

    Science.gov (United States)

    Sun, Jingchang; Bian, Jiming; Chen, Liansong; Wang, Yuxin; Gong, Yu; Li, Yang; Liu, Kuichao; Chang, Cheng; Li, Ming; Du, Guotong

    2013-07-01

    We report on the effect of seed layers thickness on the synthesis of one dimensional (1D) ZnO rods using chemical bath deposition method. This procedure allows us to control the length and diameter of 1D ZnO rods in a large size range by modifying the ZnO seed layer thickness. With the increase in thickness of the seed layer, the length of the 1D ZnO rods ranges from 13.1 μm to 2.1 μm, and the diameter varies from 2.4 μm to 102 nm, meanwhile the laying 1D ZnO rods standup gradually. Photoluminescence measurements indicate that the near band edge emission of the 1D ZnO rods blueshift to higher energy direction with the increasing seed layers thickness.

  4. On the Rod Drop technique in integral reactivity measures in control banks and reactor safety; Sobre a tecnica de Rod Drop em medidas de reatividade integral em bancos de controle e seguranca de reatores

    Energy Technology Data Exchange (ETDEWEB)

    Stefani, Giovanni Laranjo

    2013-07-01

    This work presents a study on the effect of shading in neutron detectors, when used in measures of reactivity with the rod drop technique. Shading can be understood as a change in the efficiency of the detectors, when it is given in detected neutrons fission occurred in the reactor, more evident in the detectors closest to the bank being inserted. The method of analysis was based on simulations of reactor IPEN/MB-01, using the code CITATION and MCNP program. In both cases, the results were static, showing Neutronic flows in only two situations: before insertion of the control rod and after insertion. The measure of reactivity in this case was achieved using the expression derived from the source jerk technique. In addition to theoretical study, data from a rod drop experiment conducted in the reactor IPEN/MB-01 were also used. In this case, the reactivity was obtained using inverse kinetic method, since experimental data were set of values that vary with time. In all cases, correction factors for the shadowing effect have been proposed. (author)

  5. TRIGA control rod position and reactivity transient Monitoring by Neural Networks

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, R.; Palomba, M.; Sepielli, M. [ENEA - Casaccia TRIGA Reactor (Italy)

    2008-10-29

    Plant sensors drift or malfunction and operator actions in nuclear reactor control can be supported by sensor on-line monitoring, and data validation through soft-computing process. On-line recalibration can often avoid manual calibration or drifting component replacement. DSP requires prompt response to the modified conditions. Artificial Neural Network (ANN) and Fuzzy logic ensure: prompt response, link with field measurement and physical system behaviour, data incoming interpretation, and detection of discrepancy for mis-calibration or sensor faults. ANN (Artificial Neural Network) is a system based on the operation of biological neural networks. Although computing is day by day advancing, there are certain tasks that a program made for a common microprocessor is unable to perform. A software implementation of an ANN can be made with Pros and Cons. Pros: A neural network can perform tasks that a linear program can not; When an element of the neural network fails, it can continue without any problem by their parallel nature; A neural network learns and does not need to be reprogrammed; It can be implemented in any application; It can be implemented without any problem. Cons: The architecture of a neural network is different from the architecture of microprocessors therefore needs to be emulated; it requires high processing time for large neural networks; and the neural network needs training to operate. Three possibilities of training exist: Supervised learning: the network is trained providing input and matching output patterns; Unsupervised learning: input patterns are not a priori classified and the system must develop its own representation of the input stimuli; Reinforcement Learning: intermediate form of the above two types of learning, the learning machine does some action on the environment and gets a feedback response from the environment. Two TRIGAN ANN applications are considered: control rod position and fuel temperature. The outcome obtained in this

  6. Experiment and Simulation Effects of Cyclic Pitch Control on Performance of Horizontal Axis Wind Turbine

    Directory of Open Access Journals (Sweden)

    Le Quang Sang

    2017-06-01

      Keywords: Floating Offshore Wind Turbine, Aerodynamic Forces, Cyclic Pitch Control, FAST Code, Wind Tunnel Experiment Article History: Received February 11th 2017; Received in revised form April 29th 2017; Accepted June 2nd 2017; Available online How to Cite This Article: Sang, L.Q., Maeda, T., Kamada, Y., and Li, Q. (2017 Experiment and simulation effect of cyclic pitch control on performance of horizontal axis wind turbine to International Journal of Renewable Energy Develeopment, 6(2, 119-125. https://doi.org/10.14710/ijred.6.2.119-125

  7. A computer module used to calculate the horizontal control surface size of a conceptual aircraft design

    Science.gov (United States)

    Sandlin, Doral R.; Swanson, Stephen Mark

    1990-01-01

    The creation of a computer module used to calculate the size of the horizontal control surfaces of a conceptual aircraft design is discussed. The control surface size is determined by first calculating the size needed to rotate the aircraft during takeoff, and, second, by determining if the calculated size is large enough to maintain stability of the aircraft throughout any specified mission. The tail size needed to rotate during takeoff is calculated from a summation of forces about the main landing gear of the aircraft. The stability of the aircraft is determined from a summation of forces about the center of gravity during different phases of the aircraft's flight. Included in the horizontal control surface analysis are: downwash effects on an aft tail, upwash effects on a forward canard, and effects due to flight in close proximity to the ground. Comparisons of production aircraft with numerical models show good accuracy for control surface sizing. A modified canard design verified the accuracy of the module for canard configurations. Added to this stability and control module is a subroutine that determines one of the three design variables, for a stable vectored thrust aircraft. These include forward thrust nozzle position, aft thrust nozzle angle, and forward thrust split.

  8. Modelling and control of growing slugs in horizontal multiphase pipe flows

    Directory of Open Access Journals (Sweden)

    Steinar M. Elgsæter

    2006-07-01

    Full Text Available In this paper, the use of active control to restrict the length of growing slugs in horizontal pipelines is investigated. Specifically, the paper attempts to determine if such control can be attained with realistic measurements and actuators. Simulations in OLGA2000 show that a feedback controller can use measurements or estimates of slug length to control the growth of a slug in a horizontal pipeline by partially closing inlet or outlet chokes. A control-volume approach is used to develop a low-order model of inlet choke-slug growth dynamics based on mass- and impulse balances. The resulting model is a system of nonlinear differential-algebraic equations, which is suitable for observer-design. The tuned model is found to be in good agreement with experiments and OLGA2000-simulations. Linearizations of the model are found to be observable around realistic trajectories when rates and pressures at the inlet and outlet are measured. An extended Luenberger-observer is shown to give good estimates of slug length and -position in simulations even under model uncertainty.

  9. Advances in methods of commercial FBR core characteristics analyses. Investigations of a treatment of the double-heterogeneity and a method to calculate homogenized control rod cross sections

    Energy Technology Data Exchange (ETDEWEB)

    Sugino, Kazuteru [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center; Iwai, Takehiko

    1998-07-01

    A standard data base for FBR core nuclear design is under development in order to improve the accuracy of FBR design calculation. As a part of the development, we investigated an improved treatment of double-heterogeneity and a method to calculate homogenized control rod cross sections in a commercial reactor geometry, for the betterment of the analytical accuracy of commercial FBR core characteristics. As an improvement in the treatment of double-heterogeneity, we derived a new method (the direct method) and compared both this and conventional methods with continuous energy Monte-Carlo calculations. In addition, we investigated the applicability of the reaction rate ratio preservation method as a advanced method to calculate homogenized control rod cross sections. The present studies gave the following information: (1) An improved treatment of double-heterogeneity: for criticality the conventional method showed good agreement with Monte-Carlo result within one sigma standard deviation; the direct method was consistent with conventional one. Preliminary evaluation of effects in core characteristics other than criticality showed that the effect of sodium void reactivity (coolant reactivity) due to the double-heterogeneity was large. (2) An advanced method to calculate homogenize control rod cross sections: for control rod worths the reaction rate ratio preservation method agreed with those produced by the calculations with the control rod heterogeneity included in the core geometry; in Monju control rod worth analysis, the present method overestimated control rod worths by 1 to 2% compared with the conventional method, but these differences were caused by more accurate model in the present method and it is considered that this method is more reliable than the conventional one. These two methods investigated in this study can be directly applied to core characteristics other than criticality or control rod worth. Thus it is concluded that these methods will

  10. Monitoring and Early Warning of Control Rod State in Rod Drop Test%落棒试验对控制棒状态的监测与预警

    Institute of Scientific and Technical Information of China (English)

    李刚; 柴伟东; 张大勇; 何庆琼

    2012-01-01

    The paper introduces the method and improvement of control rod drop test in Daya Bay and Ling'Ao NPP. The accuracy and versatility of the improved automatic calculation program is verified in recent outages, and meet the requirements of the control rod drop test. The program extends inspecting contents in the control rod drop test, provides a new method for monitoring and early warning of thecontrol rod state.%介绍了大亚湾和岭澳核电站控制棒落棒试验数据处理方法及其改进.近几次大修落棒数据的验证表明,改进后自动化程序的精确性和通用性均能够满足落棒试验的基本要求,程序扩充了落棒试验检查的项目,为控制棒状态的监测和预警提供了一种新的方法和手段.

  11. Local Flow Regime Transition Criteria of Gas-Liquid Two-phase Flow in Vertical Upward Tube with a Horizontal Rod%垂直上升管内有水平柱体时气液两相局部流型转变的研究

    Institute of Scientific and Technical Information of China (English)

    胡志华; 杨燕华; 刘磊; 周芳德

    2006-01-01

    The upward multiphase cross flow and heat transfer in the vertical tube may occur in oil production and chemical facilities. In this study, the local flow patterns of an upward gas-water two phase cross flow in a vertical tube with a horizontal rod have been investigated with an optical probe and the digital high speed video system. The local flow patterns are defined as the bubble, slug, churn and annular flow patterns. Optical probe signals are analyzed in terms of probability density function, and it is proved that the local flow patterns can be recognized by this method. The transition mechanisms between the different flow patterns have been analyzed and the corresponding transitional models are proposed. Finally, local flow pattern maps of the upward gas-water two-phase flow in the vertical tube with a horizontal rod are constructed.

  12. Implementation of the Control Rod Movement Option by means of Control Variables in RELAP5/PARCS v2.7 Coupled Code (NUREG/IA-0402)

    OpenAIRE

    Miró Herrero, Rafael; Ana Ibáñez, Pablo; Barrachina Celda, Teresa María; Martínez-Murillo, J.C.; Pereira, C.; Verdú Martín, Gumersindo Jesús

    2014-01-01

    The objective of this work is to introduce an improvement in best estimate coupled neutronicthermalhydraulic 3D codes simulations, by adding a model for the control rod movement in the coupled code RELAP5/PARCS v2.7, by means of control variables, with the aim of being able to dynamically analyze asymmetric transient accidents, as the reactivity insertion accidents (RIA) in a nuclear reactor, reproducing all the reactors control systems. The modification developed in this work ...

  13. Development of thermal protective seal for hot structure control surface actuator rod

    Science.gov (United States)

    Infed, F.; Handrick, K.; Lange, H.; Steinacher, A.; Weiland, S.; Wegmann, C.

    2012-01-01

    For the Intermediate eXperimental Vehicle (IXV) the deflection of the highly loaded body flap is performed by an actuator system which is connected to the body flap by a rod. Besides the thermal and mechanical loads the sealing of the inner vehicle against the possible leaking hot plasma is an important issue whereby the special challenge for the design results from the spatial movement of the rod. This requires a design consisting of different parts and various materials in order to satisfy the mechanical flexibility and the resistance to the thermal and mechanical loads under the aspect of reusability. This paper describes the MT Aerospace approach for the thermal protection system for the actuator as presented for the critical design review of IXV. The design is presented and described including all necessary performed analysis steps toward such a design.

  14. Getting into shape: How do rod-like bacteria control their geometry?

    Science.gov (United States)

    Amir, Ariel; van Teeffelen, Sven

    2014-09-01

    Rod-like bacteria maintain their cylindrical shapes with remarkable precision during growth. However, they are also capable to adapt their shapes to external forces and constraints, for example by growing into narrow or curved confinements. Despite being one of the simplest morphologies, we are still far from a full understanding of how shape is robustly regulated, and how bacteria obtain their near-perfect cylindrical shapes with excellent precision. However, recent experimental and theoretical findings suggest that cell-wall geometry and mechanical stress play important roles in regulating cell shape in rod-like bacteria. We review our current understanding of the cell wall architecture and the growth dynamics, and discuss possible candidates for regulatory cues of shape regulation in the absence or presence of external constraints. Finally, we suggest further future experimental and theoretical directions which may help to shed light on this fundamental problem.

  15. Asynchronous transmitter release: control of exocytosis and endocytosis at the salamander rod synapse.

    Science.gov (United States)

    Rieke, F; Schwartz, E A

    1996-05-15

    1. We have studied exocytosis and endocytosis in the synaptic terminal of salamander rods using a combination of Ca2+ imaging, capacitance measurement and the photolysis of Ca2+ buffers. 2. The average cytoplasmic Ca2+ concentration at the dark resting potential was 2-4 microM. 3. An average cytoplasmic Ca2+ concentration of 2-4 microM maintained a high rate of continuous exocytosis and endocytosis. 4. Changes in the rate of exocytosis were followed in less than 0.7 s by compensatory changes in the rate of endocytosis. 5. Vesicle cycling in the rod synapse is specialized for graded transmission and differs from that previously described for synapses that release synchronized bursts of transmitter.

  16. Active and Precise Control of Microdroplet Division Using Horizontal Pneumatic Valves in Bifurcating Microchannel

    Directory of Open Access Journals (Sweden)

    Shuichi Shoji

    2013-05-01

    Full Text Available This paper presents a microfluidic system for the active and precise control of microdroplet division in a micro device. Using two horizontal pneumatic valves formed at downstream of bifurcating microchannel, flow resistances of downstream channels were variably controlled. With the resistance control, volumetric ratio of downstream flows was changed and water-in-oil microdroplets were divided into two daughter droplets of different volume corresponding to the ratio. The microfluidic channels and pneumatic valves were fabricated by single-step soft lithography process of PDMS (polydimethylsiloxane using SU-8 mold. A wide range control of the daughter droplets’ volume ratio was achieved by the simple channel structure. Volumetric ratio between large and small daughter droplets are ranged from 1 to 70, and the smallest droplet volume of 14 pL was obtained. The proposed microfluidic device is applicable for precise and high throughput droplet based digital synthesis.

  17. Development of an ATCA IPMI Controller Mezzanine Board and its usage on an ATCA ROD Evaluator board for the ATLAS LAr upgrade

    CERN Document Server

    "DUMONT DAYOT, N; The ATLAS collaboration; "CAP, S; "DUMONT DAYOT, N; "FOURNIER, L; "LETENDRE, N; "PERROT, G; "Wingerter, I

    2011-01-01

    In the context of the LHC upgrades, a new Read-Out Driver (ROD) board for the ATLAS LAr calorimeter is being developed. xTCA (Advanced/Micro Telecom Computing Architecture) is becoming a standard in high energy physics and is a serious candidate for future readout systems. We will present our current developments to master ATCA and to integrate a large number of very high speed links (96 links/8.5 Gbps) on a ROD Evaluator ATCA board. To manage our ROD Evaluator, we have developed a versatile ATCA IPMI controller for ATCA boards which is FPGA Mezzanine Card (FMC) compliant.

  18. Calibrating and Controlling the Quantum Efficiency Distribution of Inhomogeneously Broadened Quantum Rods by Using a Mirror Ball

    DEFF Research Database (Denmark)

    Hansen, Per Lunnemann; Rabouw, Freddy T.; van Dijk-Moes, Relinde J. A.

    2013-01-01

    We demonstrate that a simple silver coated ball lens can be used to accurately measure the entire distribution of radiative transition rates of quantum dot nanocrystals. This simple and cost-effective implementation of Drexhage’s method that uses nanometer-controlled optical mode density variations...... near a mirror, not only allows an extraction of calibrated ensemble-averaged rates, but for the first time also to quantify the full inhomogeneous dispersion of radiative and non radiative decay rates across thousands of nanocrystals. We apply the technique to novel ultrastable CdSe/CdS dot-in-rod...

  19. Control of ligand specificity in cyclic nucleotide-gated channels from rod photoreceptors and olfactory epithelium.

    Science.gov (United States)

    Altenhofen, W; Ludwig, J; Eismann, E; Kraus, W; Bönigk, W; Kaupp, U B

    1991-11-01

    Cyclic nucleotide-gated ionic channels in photoreceptors and olfactory sensory neurons are activated by binding of cGMP or cAMP to a receptor site on the channel polypeptide. By site-directed mutagenesis and functional expression of bovine wild-type and mutant channels in Xenopus oocytes, we have tested the hypothesis that an alanine/threonine difference in the cyclic nucleotide-binding site determines the specificity of ligand binding, as has been proposed for cyclic nucleotide-dependent protein kinases [Weber, I.T., Shabb, J.B. & Corbin, J.D. (1989) Biochemistry 28, 6122-6127]. The wild-type olfactory channel is approximately 25-fold more sensitive to both cAMP and cGMP than the wild-type rod photoreceptor channel, and both channels are 30- to 40-fold more sensitive to cGMP than to cAMP. Substitution of the respective threonine by alanine in the rod photoreceptor and olfactory channels decreases the cGMP sensitivity of channel activation 30-fold but little affects activation by cAMP. Substitution of threonine by serine, an amino acid that also carries a hydroxyl group, even improves cGMP sensitivity of the wild-type channels 2- to 5-fold. We conclude that the hydroxyl group of Thr-560 (rod) and Thr-537 (olfactory) forms an additional hydrogen bond with cGMP, but not cAMP, and thereby provides the structural basis for ligand discrimination in cyclic nucleotide-gated channels.

  20. Design of a new engine mount for vertical and horizontal vibration control using magnetorheological fluid

    Science.gov (United States)

    Phu, D. X.; Choi, S. B.; Lee, Y. S.; Han, M. S.

    2014-10-01

    This paper presents a new design of a magnetorheological fluid (MR) mount for vibration control considering both vertical forces and horizontal moments such as are met in various engine systems, including a medium high-speed engine of ship. The newly designed mount, called a MR brake mount, offers several salient benefits such as small size and relatively high load capacity compared with a conventional MR engine mount that can control vertical vibration only. The principal design parameters of the proposed mount are optimally determined to achieve maximum torque with geometric and spatial constraints. Subsequently, the proposed MR mount is designed and manufactured based on the optimized design parameters. It is shown from experimental testing that the proposed mount, which combines MR mount with MR brake, can produce the desired force and torque to reduce unwanted vibration of a medium high-speed engine system of ship subjected to both vertical and horizontal exciting motions. In addition, it is verified that there is no large difference between experiment results and simulation results that are obtained from an analytical model derived in this work.

  1. Research and Development of Performance Test of CPR1000 Rod Control and Rod Position System%CPR1000棒控棒位系统性能试验研究及开发

    Institute of Scientific and Technical Information of China (English)

    赖厚晶; 陈卫华; 姚立民; 钟立军; 李亚坚; 刘琢

    2013-01-01

    落棒试验、控制棒驱动机构(CRDM)性能试验、棒位探测器线性试验是棒控棒位系统3个重要的性能试验.为简化试验步骤、提高准确性,中广核工程有限公司与Rolls-Royce公司联合开发了一套全自动智能化试验设备,对这3个性能试验分别进行了研究,并与大亚湾、岭澳一期的测试设备进行比较.结果表明,CPR1000棒控棒位系统性能试验设备能够快捷、可靠地为调试、运行人员提供试验数据,有效缩短了棒控棒位系统性能试验所需的时间,提高了电站的经济效益.%Rod drop test, control rod drive mechanism(CRDM) performance test and rod position detector linearity test are three of the most important performance tests for rod control and rod position system. In order to simplify the test procedures and improve test accuracy, CNPEC and Rolls-Royce jointly develop a set of intelligent automatic test equipment. The three performance tests are researched and the test equipment used in Daya Bay and ling Ao phase I Nuclear Power Station are compared. The results show that the CPR1000 performance test equipment provides test data to commissioning and operation personnel quickly and reliably. It effectively reduces the time needed in performance test and increases the economic benefit of the nuclear power station.

  2. Nondestructive and Destructive Examination Studies on Removed-from-Service Control Rod Drive Mechanism Penetrations

    Energy Technology Data Exchange (ETDEWEB)

    Cumblidge, Stephen E.; Crawford, Susan L.; Doctor, Steven R.; Seffens, Rob J.; Schuster, George J.; Toloczko, Mychailo B.; Harris, Robert V.; Bruemmer, Stephen M.

    2007-06-07

    Studies conducted at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington, focused on assessing the effectiveness of nondestructive examination (NDE) techniques for inspecting control rod drive mechanism (CRDM) nozzles and J-groove weldments. The primary objectives of this work are to provide information to the U.S. Nuclear Regulatory Commission (NRC) on the effectiveness of NDE methods as related to the in-service inspection of CRDM nozzles and J-groove weldments and to enhance the knowledge base of primary water stress corrosion cracking (PWSCC) through destructive characterization of the CRDM assemblies. Two CRDM assemblies were removed from service, decontaminated, and then used in a series of NDE and destructive examination (DE) measurements; this report addresses the following questions: 1) What did each NDE technique detect? 2) What did each NDE technique miss? 3) How accurately did each NDE technique characterize the detected flaws? 4) Why did the NDE techniques perform or not perform? Two CRDM assemblies including the CRDM nozzle, the J-groove weld, buttering, and a portion of the ferritic head material were selected for this study. This report focuses on a CRDM assembly that contained suspected PWSCC, based on in-service inspection data and through-wall leakage. The NDE measurements used to examine the CRDM assembly followed standard industry techniques for conducting in-service inspections of CRDM nozzles and the crown of the J-groove welds and buttering. These techniques included eddy current testing (ET), time-of-flight diffraction ultrasound, and penetrant testing. In addition, laboratory-based NDE methods were employed to conduct inspections of the CRDM assembly with particular emphasis on inspecting the J-groove weld and buttering. These techniques included volumetric ultrasonic inspection of the J-groove weld metal and visual testing via replicant material of the J-groove weld. The results from these NDE studies were used to

  3. Development of in-vessel type control rod drive mechanism for a innovative small reactor (Contract research)

    Energy Technology Data Exchange (ETDEWEB)

    Yoritsune, Tsutomu; Ishida, Toshihisa [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-03-01

    Although the control rod drive mechanism of an existing large scale light water reactor is generally installed outside the reactor vessel, an in-vessel type control rod drive mechanism (INV-CRDM) is installed inside the reactor vessel. The INV-CRDM contributes to compactness and simplicity of the reactor system, and it can eliminate the possibility of a rod ejection accident. Therefore, INV-CRDM is an important technology adopted in an innovative small reactor. Japan Atomic Energy Research Institute (JAERI) has developed this type of CRDM driven by an electric motor, which can work under high temperature and high pressure water for the advanced marine reactor. On the basis of this research result, a driving motor coil and a bearing were developed to be used under the high temperature steam, severe condition for an innovative small reactor. About the driving motor, we manufactured the driving motor available for high temperature steam and carried out performance test under room temperature atmosphere to confirm the electric characteristic and coolability of the driving coil. With these test results and the past test results under high temperature water, we analyzed and evaluated the electric performance and coolability of the driving coil under high temperature steam. Concerning bearing, we manufactured the test pieces using some candidate material for material characteristic test and carried out the rolling wear test under high temperature steam to select the material. Consequently, we confirmed that performance of the driving coil for the advanced type driving motor, is enough to be used under high temperature steam. And, we evaluated the performance of the bearing and selected the material of the bearing, which can be used under high temperature steam. From these results, we have obtained the prospect that the INV-CRDM can be used for an innovative small reactor under steam atmosphere could be developed. (author)

  4. Development of in-vessel type control rod drive mechanism for a innovative small reactor (Contract research)

    Energy Technology Data Exchange (ETDEWEB)

    Yoritsune, Tsutomu; Ishida, Toshihisa [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-03-01

    Although the control rod drive mechanism of an existing large scale light water reactor is generally installed outside the reactor vessel, an in-vessel type control rod drive mechanism (INV-CRDM) is installed inside the reactor vessel. The INV-CRDM contributes to compactness and simplicity of the reactor system, and it can eliminate the possibility of a rod ejection accident. Therefore, INV-CRDM is an important technology adopted in an innovative small reactor. Japan Atomic Energy Research Institute (JAERI) has developed this type of CRDM driven by an electric motor, which can work under high temperature and high pressure water for the advanced marine reactor. On the basis of this research result, a driving motor coil and a bearing were developed to be used under the high temperature steam, severe condition for an innovative small reactor. About the driving motor, we manufactured the driving motor available for high temperature steam and carried out performance test under room temperature atmosphere to confirm the electric characteristic and coolability of the driving coil. With these test results and the past test results under high temperature water, we analyzed and evaluated the electric performance and coolability of the driving coil under high temperature steam. Concerning bearing, we manufactured the test pieces using some candidate material for material characteristic test and carried out the rolling wear test under high temperature steam to select the material. Consequently, we confirmed that performance of the driving coil for the advanced type driving motor, is enough to be used under high temperature steam. And, we evaluated the performance of the bearing and selected the material of the bearing, which can be used under high temperature steam. From these results, we have obtained the prospect that the INV-CRDM can be used for an innovative small reactor under steam atmosphere could be developed. (author)

  5. Identification and robust water level control of horizontal steam generators using quantitative feedback theory

    Energy Technology Data Exchange (ETDEWEB)

    Safarzadeh, O., E-mail: O_Safarzadeh@sbu.ac.ir [Shahid Beheshti University, P.O. Box: 19839-63113, Tehran (Iran, Islamic Republic of); Khaki-Sedigh, A. [K. N. Toosi University of Technology, Tehran (Iran, Islamic Republic of); Shirani, A.S. [Shahid Beheshti University, P.O. Box: 19839-63113, Tehran (Iran, Islamic Republic of)

    2011-09-15

    Highlights: {yields} A robust water level controller for steam generators (SGs) is designed based on the Quantitative Feedback Theory. {yields} To design the controller, fairly accurate linear models are identified for the SG. {yields} The designed controller is verified using a developed novel global locally linear neuro-fuzzy model of the SG. {yields} Both of the linear and nonlinear models are based on the SG mathematical thermal-hydraulic model developed using the simulation computer code. {yields} The proposed method is easy to apply and guarantees desired closed loop performance. - Abstract: In this paper, a robust water level control system for the horizontal steam generator (SG) using the quantitative feedback theory (QFT) method is presented. To design a robust QFT controller for the nonlinear uncertain SG, control oriented linear models are identified. Then, the nonlinear system is modeled as an uncertain linear time invariant (LTI) system. The robust designed controller is applied to the nonlinear plant model. This nonlinear model is based on a locally linear neuro-fuzzy (LLNF) model. This model is trained using the locally linear model tree (LOLIMOT) algorithm. Finally, simulation results are employed to show the effectiveness of the designed QFT level controller. It is shown that it will ensure the entire designer's water level closed loop specifications.

  6. The Controlled Synthesis of Carbon Tubes and Rods by Template-Assisted Twin Polymerization

    Directory of Open Access Journals (Sweden)

    Falko Böttger-Hiller

    2013-01-01

    Full Text Available The application of porous carbon is versatile. It is used for high-performance catalyst support, electrode material in batteries, and gas storage. In each of these application fields nanostructuring improves the material properties. Supercapacitors store a high energy density. Exactly adapted carbon structures increase the life of lithium batteries and protect catalysts with increasing reaction rate and selectivity. Most of porous carbon materials have a spherical shape. To the best of our knowledge, there is no procedure to synthesize nanostructured cylindrical porous carbon systematically. Here, template glass fibres and SiO2-tubes were modified with nanostructured SiO2/phenolic resin and SiO2/poly(furfuryl alcohol layers by surface twin polymerization (TP of 2,2′-spirobi[4H-1,3,2-benzodioxasiline] and tetrafurfuryloxysilane. Afterwards the SiO2/polymer layer on the template is thermally transformed into a defect-free nanostructured SiO2/carbon layer. After completely removing the SiO2 components microporous carbon tubes or rods are finally achieved. The diameters of the carbon rods and the inner as well as the outer diameter of the carbon tubes are adjustable according to the shape and size of the template. Thus, a huge variety of microporous carbon materials can be easily produced by template-assisted TP.

  7. Reciprocal control of retinal rod cyclic GMP phosphodiesterase by its gamma subunit and transducin.

    Science.gov (United States)

    Wensel, T G; Stryer, L

    1986-09-01

    The switching on of the cGMP phosphodiesterase (PDE) in retinal rod outer segments by activated transducin (T alpha-GTP) is a key step in visual excitation. The finding that trypsin activates PDE (alpha beta gamma) by degrading its gamma subunit and the reversal of this activation by gamma led to the proposal that T alpha-GTP activates PDE by relieving an inhibitory constraint imposed by gamma (Hurley and Stryer: J. Biol. Chem. 257:11094-11099, 1982). We report here studies showing that the addition of gamma subunit also reverses the activation of PDE by T alpha-GTP-gamma S. A procedure for preparing gamma in high yield (50-80%) is presented. Analyses of SDS polyacrylamide gel slices confirmed that inhibitory activity resides in the gamma subunit. Nanomolar gamma blocks the activation of PDE by micromolar T alpha-GTP gamma S. The degree of activation of PDE depends reciprocally on the concentrations of gamma and T alpha-GTP gamma S. gamma remains bound to the disk membrane during the activation of PDE by transducin. The binding of gamma to the alpha beta subunits of native PDE is very tight; the dissociation constant is less than 10 pM, indicating that fewer than 1 in 1,700 PDE molecules in rod outer segments are activated in the absence of T alpha-GTP.

  8. Erodibility controls on the vertical and horizontal scalings of topography : a case study in the Himalayas

    Science.gov (United States)

    Godard, V.; Steer, P.

    2011-12-01

    Understanding the scaling properties of topography in actively uplifting areas is a major issue in quantitative geomorphology. Analytical formulations of non-glaciated landscape evolution clearly demonstrate that metrics such as local relief or drainage density are explicitly related to the spatial distribution of tectonic uplift, precipitation, erodibility and local slope across the landscape. However, in most regions, these parameters are seldom documented with enough resolution and precision to allow a systematic and statistically significant investigation of their relationships with both horizontal and vertical scaling properties of topography. A notable exception is the Himalaya of central Nepal, where the last 20 years of tectonic and geomorphological research have produced one of the densest regional data-set and documented major gradients in uplift and precipitation across the range [e.g. Lavé and Avouac, 2001; Bookhagen and Burbank, 2006]. The purpose of our study is to use this data in order to develop a detailed investigation of the influence of the erodibility parameter in controlling the structure and texture of the landscape. We first build on the derivation of total catchment relief of Tucker and Whipple [2002] to include the contribution of precipitation in addition to uplift, erodibility. Then, by minimizing the misfit between observed and predicted catchment relief, we assess the erodibility parameter for each second or third order catchment in our area of investigation. The resultant erodibility map (1) matches the distribution of geological units and (2) reveals a number of interesting second order patterns, such as along-strike fluctuations in the Lesser Himalayas and a significant decrease in erodibility coincident with the location of the MCT zone. This latter result possibly highlights the effect of intense schistosity and fracturation on large scale erosion efficiency [Molnar et al., 2007]. Then to assess the influence of erodibility on

  9. Morphoelastic rods

    CERN Document Server

    Tiero, Alessandro

    2014-01-01

    We propose a mechanical theory describing elastic rods which, like plant organs, can grow and can change their intrinsic curvature and torsion. The equations ruling accretion and remodeling are obtained by combining balance laws involving non-standard forces with constitutive prescriptions filtered by a dissipation principle that takes into account both standard and non-standard working.

  10. Monte Carlo MSM correction factors for control rod worth estimates in subcritical and near-critical fast neutron reactors

    Directory of Open Access Journals (Sweden)

    Lecouey Jean-Luc

    2015-01-01

    Full Text Available The GUINEVERE project was launched in 2006, within the 6th Euratom Framework Program IP-EUROTRANS, in order to study the feasibility of transmutation in Accelerator Driven subcritical Systems (ADS. This zero-power facility hosted at the SCK·CEN site in Mol (Belgium couples the fast subcritical lead reactor VENUS-F with an external neutron source provided by interaction of deuterons delivered by the GENEPI-3C accelerator and a tritiated target located at the reactor core center. In order to test on-line subcriticality monitoring techniques, the reactivity of all the VENUS-F configurations used must be known beforehand to serve as benchmark values. That is why the Modified Source Multiplication Method (MSM is under consideration to estimate the reactivity worth of the control rods when the reactor is largely subcritical as well as near-critical. The MSM method appears to be a technique well adapted to measure control rod worth over a large range of subcriticality levels. The MSM factors which are required to account for spatial effects in the reactor can be successfully calculated using a Monte Carlo neutron transport code.

  11. Cortical control of vertical and horizontal saccades in progressive supranuclear palsy: An exploratory fMRI study.

    Science.gov (United States)

    Lemos, J; Pereira, D; Almendra, L; Rebelo, D; Patrício, M; Castelhano, J; Cunha, G; Januário, C; Cunha, L; Freire, A; Castelo-Branco, M

    2017-02-15

    Progressive supranuclear palsy (PSP) is a neurodegenerative disorder showing predominant brainstem involvement, characterized by marked slowing of rapid eye movements (saccades), particularly along the vertical plane. While the contribution of the brainstem damage for the saccadic disturbance in PSP has been extensively studied, much less is known about its cortical and subcortical pathomechanisms. We measured reflexive (prosaccades) and voluntary (antisaccades) saccades in the vertical and horizontal plane in PSP patients (n=8) and controls (n=10) in an eye tracking study, followed by the measurement of blood oxygenation-level dependent (BOLD) activation (PSP, n=6; controls, n=10) during similar saccade paradigms. Behaviorally, PSP patients evidenced slower and lower amplitude prosaccades (horizontal and vertical) and lower amplitude antisaccades (vertical) than controls. Functionally, patients showed decreased frontostriatal BOLD activation during prosaccades (horizontal and vertical) and antisaccades (vertical), relative to controls. Additionally, PSP patients showed less default mode network (DMN) deactivation than controls for all types of saccades. Within groups, controls showed no BOLD differences between horizontal and vertical prosaccades while PSP patients demonstrated greater DMN deactivation during vertical prosaccades. Both groups evidenced greater DMN deactivation during vertical antisaccades when compared to their horizontal counterpart and patients further showed relative frontostriatal BOLD hypoactivity during vertical antisaccades. We found fMRI evidence of frontostriatal hypoactivity in PSP patients relative to controls, especially during vertical saccades. These new findings highlight the impact of cortical impairment in saccadic disturbance of PSP. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Fast feedback control of plasma horizontal position by using DSP and IGBT inverter

    Energy Technology Data Exchange (ETDEWEB)

    Toyoda, Mitsuhiro; Kikuchi, Yusuke; Takamura, Shuichi [Nagoya Univ., Graduate School of Engineering, Nagoya, Aichi (Japan); Uesugi, Yoshihiko [Nagoya Univ., Center for Integrated Research in Science and Engineering, Nagoya, Aichi (Japan)

    2003-03-01

    To achieve high confinement properties of a tokamak plasma, it is necessary to control the plasma position, current profile, shape of magnetic surface etc. In addition to these, it has been found that a resistive wall mode (RWM) may limit the achievable plasma beta in present tokamak devices. Therefore, it is expected that an active feedback control using external coils is necessary to stabilize the RWM. A power supply for plasma control coils requires an accurate controllability and a fast response against such plasma disturbances. Recent development of high power and fast switching semiconductors, such as Insulated Gate Bipolar Transistor (IGBT) and MOSFET, improves the temporal response of power supply with a great extent. A small tokamak device, HYBTOK-II, is equipped with IGBT inverter power supplies for Joule and vertical field coils. In this paper a real-time feedback control of the plasma horizontal position has been employed with Digital Signal Processor (DSP). The experimental results on plasma response with such a feedback control have been compared with analysis of plasma column motion using transfer functions. (author)

  13. Disposal of waste channels and control rods and radioactive waste; Gestion de canales usados y barras de control como residuos radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Alvarez, L.

    2015-07-01

    Iberdrola and ENRESA are jointly developing a project for the characterization and conditioning of around 200 control rods and 70 used channel from Cofrentes Nuclear Power Plant. This treatment line for high level waste with a radiologic inventory that avoids using the El Cabril low level waste repository is new in Spain and incorporates specific features like the option to carry on with the conditioning stage prior to having a licensed package and available storage facility for this type of waste. (Author)

  14. Controlled synthesis of CuO nanostructures on Cu foil, rod and grid

    Energy Technology Data Exchange (ETDEWEB)

    Vanithakumari, S.C.; Shinde, S.L. [Materials Research Centre, Indian Institute of Science, C.V. Raman Avenue, Malleswaram, Bangalore 560012, Karnataka (India); Nanda, K.K., E-mail: nanda@mrc.iisc.ernet.in [Materials Research Centre, Indian Institute of Science, C.V. Raman Avenue, Malleswaram, Bangalore 560012, Karnataka (India)

    2011-05-15

    CuO nanowires are synthesized by heating Cu foil, rod and grid in ambient without employing a catalyst or gas flow at temperatures ranging from 400 to 800 deg. C for a duration of 1-12 h. Scanning electron microscopy (SEM) investigation reveals the formation of nanowires. The structure, morphology and phase of the as-synthesized nanowires are analyzed by various techniques such as X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). It is found that these nanowires are composed of CuO phase and the underlying film is of Cu{sub 2}O. A systematic study is carried out to find the possibilities for the transformation of one phase to another completely. A possible growth mechanism for the nanowires is also discussed.

  15. 钻装机液压防卡钎控制系统设计%Design on Hydraulic Control System of Rod Jamming Prevention for Drilling Rig

    Institute of Scientific and Technical Information of China (English)

    谭正生

    2013-01-01

    为解决钻装机在钻孔作业中的卡钎问题,提出了一种新的防卡钎方案,即在冲击油路中设置三级冲击压力,利用高压冲洗水压排渣的同时,冲洗水压信号控制推进油缸和冲击器先导油路的通断,实现自动预防缓慢卡钎,利用推进压力的突然下降或上升控制冲击器停冲来预防溶洞卡钎,利用钎转压力的上升控制推进油缸后退来预防缓慢卡钎和裂隙卡钎,并设计了相应的液压控制系统.试验结果表明,新液压防卡系统提高了钻装机的防卡钎能力,可实现自动预防和处理各类卡钎问题.%In order to solve the rod jammed problem in the borehole drilling operation of the drilling and loading machine,a new rod jammed prevention plan was provided.That was to set up a three stage impact pressure in the impact oil circuit.When the pressure of the high pressure water flushing was applied to discharge the drilling cuttings,the water flushing pressure signal could be applied to control the on-off of the pushing cylinder and pilot oil circuit of the impactor in order to realize the auto prevention of the slow rod jammed.A sudden down or up of the pushing pressure was applied to control the stop or impact of the impactor to prevent the rod jammed in the karst cave.The rising of the rod rotary pressure was applied to control the backward of the pushing cylinder to prevent the slow rod jamming and crack rod jamming.A relevant hydraulic control system was designed.The test results showed that the new hydraulic rod jamming prevention system could improve the rod jamming prevention capacity of the drilling and loading machine and could realize the automatic prevention and different rod jamming handling.

  16. The Sloping Scram Time Simulation of the Nuclear Reactor Control Rod%核反应堆控制棒倾斜落棒时程模拟

    Institute of Scientific and Technical Information of China (English)

    许珍; 白立新; 代飞

    2015-01-01

    事故情况下控制棒组件会在自身重力作用下下落,下落时间是衡量核电站安全运行的重要参数之一。通过建立落棒物理模型,分析落棒的物理过程以及控制棒下落过程中的各阶段的受力情况,得到了落棒控制方程。采用VS2010软件对控制方程数值求解,完成了控制棒组件竖直及倾斜下落过程的时程的分析,对比了倾斜落棒角度对落棒时程的影响,得出最大倾斜落棒角度,为反应堆控制棒组件的设计提供依据。%Control rod assembly will drop because of its own gravity under accident conditions , and the dropping time is one of the important parameters of the safe operation of nuclear power plant .The mathematical model of rod dropping process is established by analyzing the physical process of rod drop and the force at each stage .U-sing VS2010 to solve control equation , the vertical and inclined dropping time of the control rod component and how the angle of tilt rod drop influences the dropping time have been analyzed .The largest angle of tilt rod drop is obtained , which can provide reference for the design of the reactor control rod components .

  17. Visual inspections of the neutron absorber control rods of the IEA-R1 reactor; Inspecoes visuais nas barras absorvedoras de neutrons do reator IEA-R1

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Jose Eduardo R. da; Terremoto, Luis A.A.; Castanheira, Myrthes; Zeituni, Carlos A.; Damy, Margaret de A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Centro de Engenharia Nuclear]. E-mail: jersilva@net.ipen.br

    2002-07-01

    The Fuel Engineering Division at IPEN/CNEN-SP developed facilities for visual inspection of the IEA-R1 fuel elements and neutron absorbing control rod assemblies inside the research reactor pool. This work presents the method of visual inspection performed at IEA-R1 research reactor. These inspections were adopted to evaluate and to follow the state of the Ag-In-Cd control assemblies fabricated at CERCA in 1972 that remain in use at the reactor core. In 1998, 2000 and 20001, visual inspections were performed in these control rod assemblies, which the general conditions were evaluated. (author)

  18. Wavelength dependent neutron transmission and radiography investigations of the high temperature behaviour of materials applied in nuclear fuel and control rod claddings

    Science.gov (United States)

    Grosse, M.; Steinbrueck, M.; Kaestner, A.

    2011-09-01

    Neutron radiography was used for the investigation of the nuclear fuel and control rod cladding behaviour during steam oxidation under severe nuclear accident conditions. In order to verify the hypothesis that the unexpectedly high neutron cross-section found after oxidation of Zircaloy-4 in wet air containing 10% steam is caused by a strong hydrogen uptake, the wavelength dependence of the total macroscopic neutron cross-section of the specimens was measured. The characteristic dependence for hydrogen was not found, which is a proof that hydrogen is not absorbed significantly. The data agree mostly with the behaviour expected for β-Zr. Examinations of control rod simulators annealed until the failure in single-rod tests were performed. In order to separate the effect of the neutron absorber and control rod structure materials, radiographs taken with different neutron spectra were combined. This procedure clearly showed that the local melting resulting from the eutectic reaction between the stainless steel control rod cladding and the Zircaloy-4 guide tube is the reason for the failure.

  19. Wavelength dependent neutron transmission and radiography investigations of the high temperature behaviour of materials applied in nuclear fuel and control rod claddings

    Energy Technology Data Exchange (ETDEWEB)

    Grosse, M., E-mail: Mirco.Grosse@KIT.edu [Karlsruhe Institute of Technology, Institute for Applied Materials, P.O. Box 3640, D-76021 Karlsruhe (Germany); Steinbrueck, M. [Karlsruhe Institute of Technology, Institute for Applied Materials, P.O. Box 3640, D-76021 Karlsruhe (Germany); Kaestner, A. [Department of Spallation Source, Paul Scherrer Institute (PSI), CH-5232 Villigen (Switzerland)

    2011-09-21

    Neutron radiography was used for the investigation of the nuclear fuel and control rod cladding behaviour during steam oxidation under severe nuclear accident conditions. In order to verify the hypothesis that the unexpectedly high neutron cross-section found after oxidation of Zircaloy-4 in wet air containing 10% steam is caused by a strong hydrogen uptake, the wavelength dependence of the total macroscopic neutron cross-section of the specimens was measured. The characteristic dependence for hydrogen was not found, which is a proof that hydrogen is not absorbed significantly. The data agree mostly with the behaviour expected for {beta}-Zr. Examinations of control rod simulators annealed until the failure in single-rod tests were performed. In order to separate the effect of the neutron absorber and control rod structure materials, radiographs taken with different neutron spectra were combined. This procedure clearly showed that the local melting resulting from the eutectic reaction between the stainless steel control rod cladding and the Zircaloy-4 guide tube is the reason for the failure.

  20. National Geodetic Survey (NGS) Geodetic Control Stations, (Horizontal and/or Vertical Control), March 2009

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This data contains a set of geodetic control stations maintained by the National Geodetic Survey. Each geodetic control station in this dataset has either a precise...

  1. Feasibility study of the university of Utah TRIGA reactor power upgrade - Part I: Neutronics-based study in respect to control rod system requirements and design

    Directory of Open Access Journals (Sweden)

    Ćutić Avdo

    2013-01-01

    Full Text Available We present a summary of extensive studies in determining the highest achievable power level of the current University of Utah TRIGA core configuration in respect to control rod requirements. Although the currently licensed University of Utah TRIGA power of 100 kW provides an excellent setting for a wide range of experiments, we investigate the possibility of increasing the power with the existing fuel elements and core structure. Thus, we have developed numerical models in combination with experimental procedures so as to assess the potential maximum University of Utah TRIGA power with the currently available control rod system and have created feasibility studies for assessing new core configurations that could provide higher core power levels. For the maximum determined power of a new University of Utah TRIGA core arrangement, a new control rod system was proposed.

  2. SDRE Control Applied to the Wheel Speed of a Compressed Air Engine with Crank-Connecting-Rod Mechanism

    Directory of Open Access Journals (Sweden)

    Alexandre de Castro Alves

    2017-01-01

    Full Text Available Renewable energy sources for vehicles have been the motivation of many researches around the world. The reduction of fossil fuels deposits and increase of the pollution in cities bring the need of more efficient and cleaner energy sources. In this way, this work will present the application of a compressed air engine applied to a bicycle. The engine is composed of two pneumatic cylinders connected to the bicycle wheel through a crank-connecting-rod mechanism. In order to control the velocity of the bicycle, a strategy of control composed of two controls was implemented: a feedback and a feedforward control. For feedback control, the State-Dependent Riccati Equation (SDRE control and also a proportional-derivative (PD control are considered, considering three cases for velocity bicycle variation: 10 km/h, 20 km/h, and 30 km/h. The equations of motion of the system were obtained through the Lagrangian energy method. Numerical simulations were performed in order to analyze the dynamics of the system and the efficiency of the controllers.

  3. Is angular momentum in the horizontal plane during gait a controlled variable?

    Science.gov (United States)

    Thielemans, Valerie; Meyns, Pieter; Bruijn, Sjoerd M

    2014-04-01

    It has been suggested that angular momentum in the horizontal plane during human gait is controlled (i.e., kept minimal). However, this has not been explored in conditions when angular momentum of different segments is manipulated explicitly. In order to examine the behavior of angular momentum, 12 participants walked in 17 conditions in which angular momentum of either the arms or legs was manipulated. Subjects walked at different step lengths, different speeds and with an additional weight on either the wrist or ankle. Angular momentum of total body, arms and legs was calculated from gait kinematics. Increasing step length increased total body and leg angular momentum. When weight was added to the limbs, arm and leg angular momentum were affected and counteracted each other, so that total body angular momentum did not change. Moreover, increasing walking speed increased arm, leg and total body angular momentum. Thus, it may be concluded that if angular momentum is controlled (which only seems to be the case for conditions when weights are added), it is not strictly controlled in all gait conditions (as it may increase by walking faster/with larger steps).

  4. Heterostructure of Au nanocluster tipping on a ZnS quantum rod: controlled synthesis and novel luminescence

    Science.gov (United States)

    Tian, Yang; Wang, Ligang; Yu, Shanshan; Zhou, Weiwei

    2015-08-01

    Heterostructures of metal nanoparticles and semiconductors are widely studied for their unique properties. However, few reports are available on the heterostructure of metal nanoclusters and semiconductors. In the present study, a heterostructure, in which gold nanoclusters selectively locate at ZnS quantum rod (QR) tips, was fabricated using a two-step solvothermal route. The composition, intrinsic crystallography, and junction of the prepared heterostructure were thoroughly investigated, and it was observed to exhibit novel luminescent behaviours. By comparison with the individual components of ZnS QRs and gold clusters, the resultant heterostructure shows an enhanced exciton emission and complete depression of defect emission for the ZnS component, and a pronounced red emission for the gold nanocluster component. The mechanism of these properties and the charge transfer between gold nanoclusters and ZnS QRs were also explored. The size and location of gold in the heterostructure were also controlled during synthesis to study their effects on the luminescence.

  5. Controllable synthesis of novel zinc molybdate rod-like nanostructures via simple surfactant-free precipitation route

    Science.gov (United States)

    Shahri, Zahra; Bazarganipour, Mehdi; Salavati-Niasari, Masoud

    2013-11-01

    Zinc molybdate rod-like nanostructures have been successfully synthesized by precipitation method process and using a solid organometallic molecular precursor [bis(salicylaldehydato)zinc(II)], Zn(sal)2, and (NH4)6Mo7O24·4H2O as starting materials. Some parameters including time effect, temperature effect, and surfactant effect were investigated to reach the optimum conditions. The as synthesized nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmittance electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectra. Facile preparation and separation are important features of this route. This work has provided a general, simple, and effective method to control the composition and morphology of zinc molybdate in aqueous solution, which will be important for inorganic synthesis methodology.

  6. Benchmark of Atucha-2 PHWR RELAP5-3D control rod model by Monte Carlo MCNP5 core calculation

    Energy Technology Data Exchange (ETDEWEB)

    Pecchia, M.; D' Auria, F. [San Piero A Grado Nuclear Research Group GRNSPG, Univ. of Pisa, via Diotisalvi, 2, 56122 - Pisa (Italy); Mazzantini, O. [Nucleo-electrica Argentina Societad Anonima NA-SA, Buenos Aires (Argentina)

    2012-07-01

    Atucha-2 is a Siemens-designed PHWR reactor under construction in the Republic of Argentina. Its geometrical complexity and peculiarities require the adoption of advanced Monte Carlo codes for performing realistic neutronic simulations. Therefore core models of Atucha-2 PHWR were developed using MCNP5. In this work a methodology was set up to collect the flux in the hexagonal mesh by which the Atucha-2 core is represented. The scope of this activity is to evaluate the effect of obliquely inserted control rod on neutron flux in order to validate the RELAP5-3D{sup C}/NESTLE three dimensional neutron kinetic coupled thermal-hydraulic model, applied by GRNSPG/UNIPI for performing selected transients of Chapter 15 FSAR of Atucha-2. (authors)

  7. Study for on-line system to identify inadvertent control rod drops in PWR reactors using ex-core detector and thermocouple measures

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Thiago J.; Medeiros, Jose A.C.C.; Goncalves, Alessandro C., E-mail: tsouza@nuclear.ufrj.br, E-mail: canedo@lmp.ufrj.br, E-mail: alessandro@nuclear.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

    2015-07-01

    Accidental control rod drops event in PWR reactors leads to an unsafe operating condition. It is important to quickly identify the rod to minimize undesirable effects in such a scenario. In this event, there is a distortion in the power distribution and temperature in the reactor core. The goal of this study is to develop an on-line model to identify the inadvertent control rod dropped in PWR reactor. The proposed model is based on physical correlations and pattern recognition of ex-core detector responses and thermocouples measures. The results of the study demonstrated the feasibility of an on-line system, contributing to safer operation conditions and preventing undesirable effects, as its shutdown. (author)

  8. Development of a digital reactivity meter for criticality prediction and control rod worth evaluation in pressurized water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Kuramoto, Renato Y.R.; Miranda, Anselmo F.; Valladares, Gastao Lommez; Prado, Adelk C. [Eletrobras Termonuclear S.A. - ELETRONUCLEAR, Angra dos Reis, RJ (Brazil). Central Nuclear Almirante Alvaro Alberto], e-mail: kuramot@eletronuclear.gov.br

    2009-07-01

    In this work, we have proposed the development of a digital reactivity meter in order to monitor subcriticality continuously during criticality approach in a PWR. A subcritical reactivity meter can provide an easy prediction of the estimated critical point prior to reactor criticality, without complicated hand calculation. Moreover, in order to reduce the interval of the Physics Tests from the economical point of view, a subcritical reactivity meter can evaluate the control rod worth from direct subcriticality measurement. In other words, count rate of Source Range (SR) detector recorded during the criticality approach could be used for subcriticality evaluation or control rod worth evaluation. Basically, a digital reactivity meter is based on the inverse solution of the kinetic equations of a reactor with the external neutron source in one-point reactor model. There are some difficulties in the direct application of a digital reactivity meter to the subcriticality measurement. When the Inverse Kinetic method is applied to a sufficiently high power level or to a core without an external neutron source, the neutron source term may be neglected. When applied to a lower power level or in the sub-critical domain, however, the source effects must be taken in account. Furthermore, some treatments are needed in using the count rate of Source Range (SR) detector as input signal to the digital reactivity meter. To overcome these difficulties, we have proposed a digital reactivity meter combined with a methodology of the modified Neutron Source Multiplication (NSM) method with correction factors for subcriticality measurements in PWR. (author)

  9. Correlations of control variables for horizontal background error covariance modeling on cubed-sphere grid

    Science.gov (United States)

    Kwun, Jihye; Song, Hyo-Jong; Park, Jong-Im

    2013-04-01

    Background error covariance matrix is very important for variational data assimilation system, determining how the information from observed variables is spread to unobserved variables and spatial points. The full representation of the matrix is impossible because of the huge size so the matrix is constructed implicitly by means of a variable transformation. It is assumed that the forecast errors in the control variables chosen are statistically independent. We used the cubed-sphere geometry based on the spectral element method which is better for parallel application. In cubed-sphere grids, the grid points are located at Gauss-Legendre-Lobatto points on each local element of 6 faces on the sphere. The two stages of the transformation were used in this study. The first is the variable transformation from model to a set of control variables whose errors are assumed to be uncorrelated, which was developed on the cubed sphere-using Galerkin method. Winds are decomposed into rotational part and divergent part by introducing stream function and velocity potential as control variables. The dynamical constraint for balance between mass and wind were made by applying linear balance operator. The second is spectral transformation which is to remove the remaining spatial correlation. The bases for the spectral transform were generated for the cubed-sphere grid. 6-hr difference fields of shallow water equation (SWE) model run initialized by variational data assimilation system were used to obtain forecast error statistics. In the horizontal background error covariance modeling, the regression analysis of the control variables was performed to define the unbalanced variables as the difference between full and correlated part. Regression coefficient was used to remove the remaining correlations between variables.

  10. A multicenter randomized clinical trial of one-rod etonogestrel and two-rod levonorgestrel contraceptive implants with nonrandomized copper-IUD controls: methodology and insertion data.

    Science.gov (United States)

    Meirik, Olav; Brache, Vivian; Orawan, Kiriwat; Habib, Ndema Abu; Schmidt, Johannes; Ortayli, Nuriye; Culwell, Kelly; Jackson, Emily; Ali, Moazzam

    2013-01-01

    Comparative data on etonogestrel and two-rod levonorgestrel contraceptive implants are lacking. A multicenter, open, parallel-group trial with random allocation of implants was performed. For every second implant user, an age-matched woman choosing an intrauterine device (IUD) (TCu380A) was admitted. Methods and data on implant/IUD insertion and 6-week follow-up are reported. A total of 2008 women were randomized to an implant, and 974 women were enrolled in the IUD group. Results from 997 etonogestrel implant users, 997 levonorgestrel implant users and 971 IUD users were analyzed. In the etonogestrel and levonorgestrel groups, respectively, mean insertion durations were 51 (SD 50.2) s and 88 (SD 60.8) s; complication rates at insertion were 0.8% and 0.2%; and at follow-up, 27.2% and 26.7% of women, respectively, had signs or symptoms at the insertion site. At follow-up within 6 weeks after insertion, all implants were in situ, while 2.1% of IUDs were expelled. Performance of etonogestrel and levonorgestrel implants at insertion and within the first 6 weeks is similar. Short-term (6 weeks) continuation rates appear higher for implants than TCu380A. Copyright © 2013 Elsevier Inc. All rights reserved.

  11. Numerical Prediction of Dual-Cooled Annular Fuel Temperature During Control Rod Ejection Accident in OPR1000

    Energy Technology Data Exchange (ETDEWEB)

    Park, Chan Eun; In, Wang Kee; Yang, Soo Hyung; Chun, Tae Hyun; Song, Kun Woo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2009-10-15

    A dual-cooled annular fuel concept for a light water reactor has been introduced by MIT for a significant amount of reactor power uprate. MIT proposed a 13x13 annular fuel array replacing the 17x17 solid fuel in the Westinghouse 4-loop plant, which could increase the core power up to 50% with the considerable changes in the major reactor components. The Korea Atomic Energy Research Institute (KAERI) is also conducting a research to develop a dual-cooled fuel for its employment in an optimized pressurized water reactor in Korea, OPR1000. The dual-cooled fuel for the OPR1000 is targeted to increase the reactor power by 20% as well as reduce the fuel-pellet temperature by more than 30% without a change to the reactor components other than the fuel. Numerous technical tasks exist for assessing the applicability of the dual cooled annular fuel to the power uprate in the OPR1000. One of the important tasks is to evaluate the performance of the annular fuel during the design basis events. Particularly, the fuel temperature and the peak cladding temperature (PCT) are the important variables during the control rod ejection accident (REA), since the rod averaged fuel enthalpy should be lower than its safety limit. The fuel enthalpy is known to largely depend on the fuel temperature. This paper presents the predictions of the fuel and peak cladding temperatures during the REA. A general-purpose structural code, ABAQUS-6.8 and a computational fluid dynamics code, ANSYS CFX-11.0 were used to perform the numerical analysis of a heat transfer in the annular fuel as well as the solid fuel. The numerical predictions of the fuel maximum temperature (FMT) and PCT are compared against those predicted by a best-estimate system transient analysis code, MARS.

  12. Wear plates control rod guide tubes top internal reactor vessel C. N. VANDELLOS II; Desgaste placas tubos guia barras de control interno superior vasija del reactor C.N. Vandellos II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The guide tubes for control rods forming part of the upper internals of the reactor vessel, its function is to guide the control rod to permit its insertion in the reactor core. These guide tubes are suspended from the upper support plate which are fixed by bolts and extending to the upper core plate which is fastened by clamping bolts (split pin) to prevent lateral displacement of the guide tubes, while allowing axial expansion.

  13. Exploring Direct 3D Interaction for Full Horizontal Parallax Light Field Displays Using Leap Motion Controller

    Directory of Open Access Journals (Sweden)

    Vamsi Kiran Adhikarla

    2015-04-01

    Full Text Available This paper reports on the design and evaluation of direct 3D gesture interaction with a full horizontal parallax light field display. A light field display defines a visual scene using directional light beams emitted from multiple light sources as if they are emitted from scene points. Each scene point is rendered individually resulting in more realistic and accurate 3D visualization compared to other 3D displaying technologies. We propose an interaction setup combining the visualization of objects within the Field Of View (FOV of a light field display and their selection through freehand gesture tracked by the Leap Motion Controller. The accuracy and usefulness of the proposed interaction setup was also evaluated in a user study with test subjects. The results of the study revealed high user preference for free hand interaction with light field display as well as relatively low cognitive demand of this technique. Further, our results also revealed some limitations and adjustments of the proposed setup to be addressed in future work.

  14. Rhodopsin kinase and arrestin binding control the decay of photoactivated rhodopsin and dark adaptation of mouse rods.

    Science.gov (United States)

    Frederiksen, Rikard; Nymark, Soile; Kolesnikov, Alexander V; Berry, Justin D; Adler, Leopold; Koutalos, Yiannis; Kefalov, Vladimir J; Cornwall, M Carter

    2016-07-01

    Photoactivation of vertebrate rhodopsin converts it to the physiologically active Meta II (R*) state, which triggers the rod light response. Meta II is rapidly inactivated by the phosphorylation of C-terminal serine and threonine residues by G-protein receptor kinase (Grk1) and subsequent binding of arrestin 1 (Arr1). Meta II exists in equilibrium with the more stable inactive form of rhodopsin, Meta III. Dark adaptation of rods requires the complete thermal decay of Meta II/Meta III into opsin and all-trans retinal and the subsequent regeneration of rhodopsin with 11-cis retinal chromophore. In this study, we examine the regulation of Meta III decay by Grk1 and Arr1 in intact mouse rods and their effect on rod dark adaptation. We measure the rates of Meta III decay in isolated retinas of wild-type (WT), Grk1-deficient (Grk1(-/-)), Arr1-deficient (Arr1(-/-)), and Arr1-overexpressing (Arr1(ox)) mice. We find that in WT mouse rods, Meta III peaks ∼6 min after rhodopsin activation and decays with a time constant (τ) of 17 min. Meta III decay slows in Arr1(-/-) rods (τ of ∼27 min), whereas it accelerates in Arr1(ox) rods (τ of ∼8 min) and Grk1(-/-) rods (τ of ∼13 min). In all cases, regeneration of rhodopsin with exogenous 11-cis retinal is rate limited by the decay of Meta III. Notably, the kinetics of rod dark adaptation in vivo is also modulated by the levels of Arr1 and Grk1. We conclude that, in addition to their well-established roles in Meta II inactivation, Grk1 and Arr1 can modulate the kinetics of Meta III decay and rod dark adaptation in vivo.

  15. Control rod calibration methods for fast breeder reactors applied to Phenix; Les methodes d'etalonnage des barres de commande des reacteurs a neutrons rapides application a Phenix

    Energy Technology Data Exchange (ETDEWEB)

    Lecourt, G

    1998-06-18

    The control and the emergency shutdown of a fast breeder reactor depends essentially on control rods. For this reason, it is imperative to know exactly how much anti reactivity is introduced with the rods in the reactor core. Different methods have been compared in order to see if they are compatible with Phenix reactor. Their limits have been studied. The shadow and anti shadow effects that can the rods make one to the other and then their effective weight of the rods screen have been clarified. (N.C.)

  16. Design, Fabrication, and Characteristic Experiment of a Hybrid Electromagnet for Bottom-mounted Control Rod Drive Mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Hyung; Lee, Jin-Haeng; Yoo, Yeon-Sik; Cho, Yeong-Garp; Ryu, Jeong-Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    A control rod drive mechanism (CRDM) is located in the reactor pool top (Top-mounted) or a reactivity control mechanism room under the reactor pool bottom (Bottom-mounted). The function of the CRDM is to insert, withdraw, or maintain neutron absorbing material at any required position in the reactor core in order to keep reactivity control of the core. There are so many kinds of CRDMs, such as magnetic-jack type, hydraulic type, rack and pinion type, chain type, and linear or rotary step motor and so on. As a part of a new project, we have completed the design, fabrication, and characteristic experiment of the prototype bottom-mounted CRDM (BMCRDM). The measured carrying capacity of proto-type hybrid electromagnet is approximately 2.8 (kgf) larger than that of 3D-FEM result. The major reasons of the disagreement between the measured and calculated results are as follows. A. B-H Curve differences of ferromagnetic materials B. Fabrication tolerance and the measured maximum temperature at the center of winding for proto-type hybrid electromagnet, 106 .deg. C, appeared to be 5 .deg. C higher than the analytical result. The major reasons of the disagreement between the measured and calculated results are as follows. A. Difficult for exact modeling of winding including impregnated epoxy, coil insulator, and isolator.

  17. Dynamically Hedging Oil and Currency Futures Using Receding Horizontal Control and Stochastic Programming

    Science.gov (United States)

    Cottrell, Paul Edward

    There is a lack of research in the area of hedging future contracts, especially in illiquid or very volatile market conditions. It is important to understand the volatility of the oil and currency markets because reduced fluctuations in these markets could lead to better hedging performance. This study compared different hedging methods by using a hedging error metric, supplementing the Receding Horizontal Control and Stochastic Programming (RHCSP) method by utilizing the London Interbank Offered Rate with the Levy process. The RHCSP hedging method was investigated to determine if improved hedging error was accomplished compared to the Black-Scholes, Leland, and Whalley and Wilmott methods when applied on simulated, oil, and currency futures markets. A modified RHCSP method was also investigated to determine if this method could significantly reduce hedging error under extreme market illiquidity conditions when applied on simulated, oil, and currency futures markets. This quantitative study used chaos theory and emergence for its theoretical foundation. An experimental research method was utilized for this study with a sample size of 506 hedging errors pertaining to historical and simulation data. The historical data were from January 1, 2005 through December 31, 2012. The modified RHCSP method was found to significantly reduce hedging error for the oil and currency market futures by the use of a 2-way ANOVA with a t test and post hoc Tukey test. This study promotes positive social change by identifying better risk controls for investment portfolios and illustrating how to benefit from high volatility in markets. Economists, professional investment managers, and independent investors could benefit from the findings of this study.

  18. Implementation of a methodology to perform the uncertainty and sensitivity analysis of the control rod drop in a BWR

    Energy Technology Data Exchange (ETDEWEB)

    Reyes F, M. del C.

    2015-07-01

    A methodology to perform uncertainty and sensitivity analysis for the cross sections used in a Trace/PARCS coupled model for a control rod drop transient of a BWR-5 reactor was implemented with the neutronics code PARCS. A model of the nuclear reactor detailing all assemblies located in the core was developed. However, the thermohydraulic model designed in Trace was a simple model, where one channel representing all the types of assemblies located in the core, it was located inside a simple vessel model and boundary conditions were established. The thermohydraulic model was coupled with the neutronics model, first for the steady state and then a Control Rod Drop (CRD) transient was performed, in order to carry out the uncertainty and sensitivity analysis. To perform the analysis of the cross sections used in the Trace/PARCS coupled model during the transient, Probability Density Functions (PDFs) were generated for the 22 parameters cross sections selected from the neutronics parameters that PARCS requires, thus obtaining 100 different cases for the Trace/PARCS coupled model, each with a database of different cross sections. All these cases were executed with the coupled model, therefore obtaining 100 different outputs for the CRD transient with special emphasis on 4 responses per output: 1) The reactivity, 2) the percentage of rated power, 3) the average fuel temperature and 4) the average coolant density. For each response during the transient an uncertainty analysis was performed in which the corresponding uncertainty bands were generated. With this analysis it is possible to observe the results ranges of the responses chose by varying the uncertainty parameters selected. This is very useful and important for maintaining the safety in the nuclear power plants, also to verify if the uncertainty band is within of safety margins. The sensitivity analysis complements the uncertainty analysis identifying the parameter or parameters with the most influence on the

  19. Regional and local networks of horizontal control, Cerro Prieto geothermal area

    Science.gov (United States)

    Massey, B.L.

    1979-01-01

    The Cerro Prieto geothermal area in the Mexicali Valley 30 km southeast of Mexicali, Baja California, is probably deforming due to (1) the extraction of large volumes of steam and hot water, and (2) active tectonism. Two networks of precise horizontal control were established in Mexicali Valley by the U.S. Geological Survey in 1977 - 1978 to measure both types of movement as they occur. These networks consisted of (1) a regional trilateration net brought into the mountain ranges west of the geothermal area from survey stations on an existing U.S. Geological Survey crustal-strain network north of the international border, and (2) a local net tied to stations in the regional net and encompassing the area of present and planned geothermal production. Survey lines in this net were selected to span areas of probable ground-surface movements in and around the geothermal area. Electronic distance measuring (EDM) instruments, operating with a modulated laser beam, were used to measure the distances between stations in both networks. The regional net was run using a highly precise long-range EDM instrument, helicopters for transportation of men and equipment to inaccessible stations on mountain peaks, and a fixed wing airplane flying along the line of sight. Precision of measurements with this complex long-range system approached 0-2 ppm of line length. The local net was measured with a medium-range EDM instrument requiring minimal ancillary equipment. Precision of measurements with this less complex system approached 3 ppm for the shorter line lengths. The detection and analysis of ground-surface movements resulting from tectonic strains or induced by geothermal fluid withdrawal is dependent on subsequent resurveys of these networks. ?? 1979.

  20. Study on Decelerating Performance of Hydraulic Driving Control Rod%水压驱动控制棒减速性能研究

    Institute of Scientific and Technical Information of China (English)

    秦本科; 许星星; 薄涵亮; 宋威

    2015-01-01

    The control rod hydraulic driving line (CRHDL) is a new type of in‐vessel control rod driving technology .The control rod hydraulic deceleration device (CRHDD) is one of the key components of the CRHDL . To prevent the control rod cross wing from being permanently deformed or damaged during the fast dropping rod process ,the CRHDD performs the fast dropping rod deceleration function through the interworking of the slow‐down plug and water filled cylinder .The hydraulic driving rod deceleration test was conducted to get the slow‐down mechanism of the CRHDD ,and a dynamic model was developed to analyze the key parameters of the decelerating process .The model calculation result agrees well with the experiment result , which verifies the accuracy of the model .Then the CRHDD performance calculation under reactor high temperature working condition was carried out through the CRHDD dynamic model . The above work lays solid foundation for the design and upgrade of the CRHDD .%控制棒水压驱动线是一种新型的内置式控制棒驱动技术,控制棒水力减速装置是水压驱动线的关键部件之一,通过水力减速片和减速筒体的配合对控制棒进行减速,降低快速落棒末端的冲击速度,避免控制棒的变形和损坏。完成了水压驱动线快速落棒减速实验,对减速过程机理进行了分析,在此基础上建立了水压驱动线快速落棒减速理论模型,理论模型的求解结果与实验结果符合很好,从而验证了理论模型的正确性。通过该模型对热态工况下水压驱动线的快速落棒性能进行了分析,为控制棒水压驱动线减速环节的设计和优化奠定了基础。

  1. The Tested Control Rod Drive Mechanism System based on PLC%基于PLC的控制棒驱动机构复验

    Institute of Scientific and Technical Information of China (English)

    汪明珠; 范祖光; 解苑明; 吴军

    2011-01-01

    In order to test control rod drive mechanism would be match the functions and performance of the requirements of the design specifications, and complete the factory test, design this test device for test drive mechanism. Hie device based on programmable logic controller realized rod lifting, rod keeping, rod inserting and integrated alarm etc. Function. It introduces the working principle and realization method of the test device of control rod drive mechanism. Through connecting debugging with driving mechanism, The result proved that the test device would be match the requirements of the technical agreement, the function and performance of CRDM meet the requirements of the design specifications of the production.%为了检验控制棒驱动机构的功能和性能是否满足设计规范书的要求,完成驱动机构的出厂试验,设计了控制棒驱动机构试验装置.基于可编程逻辑控制器(以下简称PLC)的控制棒驱动机构试验装置实现了控制棒的提升、保持、下降和报警综合等功能.文中介绍了控制棒驱动机构试验装置的原理和实现方法,通过和驱动机构的联调试验,证明控制棒驱动机构试验装置符合技术协议的要求,驱动机构的功能和性能满足设计规范书的要求.

  2. 长棒控制系统中设备可靠性检测技术研究%Research on Reliability Testing of Rod Control System

    Institute of Scientific and Technical Information of China (English)

    黄程; 邢璐辉; 刘芳芳

    2016-01-01

    The data acquisition system is an auxiliary and creative system for rod control and rod indicator system of CNNO-1. Its main function is to realize the real-time recording for rod coil current waveform,support the CRDM step movement test and drop time measurement test in the overhaul period, but no control function is given. Application of this system provides a high quality analysis platform and experimental platform of Rod Control and rod Indicator System maintenance. In the process of design and implementation of the system, The project team encountered many problems include the lack of consideration about design pattern of software system, the phenomenon of missing data, stale data deletion mechanisms problem etc.Finally the project team put forward the improvement scheme, and the improved effect is good.%秦山30万机组的棒控数据采集系统是长棒控制系统的一个故障检测系统,主要功能是实现棒束线圈电流波形实时记录,为棒控系统设备可靠性检测提供了一个高质量的分析平台。本文详细地分析了采集系统在应用过程中出现的采集漏帧现象、数据存储结构臃肿、数据处理机制失效等若干问题,并且阐述了改进方案和最终应用效果。

  3. Analysis and Improvement of CANDU-6 Heavy Water Reactor Shut Off Rods Control Logic%CANDU-6型重水堆停堆棒控制逻辑的故障分析与改进

    Institute of Scientific and Technical Information of China (English)

    徐清华

    2015-01-01

    停堆棒控制逻辑是用于停堆棒的提棒、插棒、棒位显示和在顶部停堆棒的棒数显示等功能,本文对停堆棒棒位显示漂移故障及棒到顶信号与一号停堆系统的停堆棒就位指示不一致的故障的产生原因进行了详细地分析,并采取有针对性的改进措施,提高停堆棒控制逻辑的可靠性。%Rods control logic is to drive out, and drive in shut off rods ,and display rods position and number of full withdraw rods, In this paper, rod position fluctuation problem of shut off rods, and disaccord problem of rod position and shutdown system NO.1 Rod Ready Indicator were introduced. In this paper, the causes of the problems were analyzed in detail, and problem disposal were described in detail. Improvement advice was raised, and these advices improved the reliability of shut off rod control logic.

  4. Controlled cooling technology for bar and rod mills -- Computer simulation and operational results

    Energy Technology Data Exchange (ETDEWEB)

    Mauk, P.J.; Kruse, M.; Plociennik, U. [SMS Schloemann-Siemag AG, Dusseldorf (Germany)

    1995-09-01

    The Controlled Cooling Technology (CCT) developed by SMS to simulate the rolling process and automatic control of the water cooling sections is presented. The Controlled Rolling and Cooling Technology (CRCT) model is a key part of the CCT system. It is used to simulate temperature management for the rolling stock on the computer before the actual rolling process takes place. This makes it possible to dispense with extensive rolling tests in the early stages of project planning and to greatly reduce the extent of such tests prior to the start of commercial production in a rolling mill. The CRCT model has been in use at Von Moos Stahl Ag for three years. It demonstrates that, by targeted improvement of the set-up values in both the technology and the plant, it is possible to improve microstructure quality and achieve better geometrical parameters in the rolled products. Also, the results gained with the CCT system in practical operation at the Kia Steel Bar Mill, Kunsan, Korea, are presented.

  5. Evaluating the control rod modelling approach used in the South African PBMR: comparison of VSOP calculations with ASTRA experiments

    Energy Technology Data Exchange (ETDEWEB)

    Reitsma, F. E-mail: reitsma@aec.co.za; Naidoo, D

    2003-06-01

    The problem of modelling a highly absorbing region in a diffusion calculation is well known and many methods have been developed to accommodate the transport effects in diffusion theory. In this work the use of the equivalent cross-sections method for pebble bed type reactors is evaluated by applying it to calculations of control rod (CR) experiments performed at the ASTRA Critical Facility at the Russian Research Centre, Kurchatov Institute in Moscow. The measured reactivity worths of the CRs situated in the side reflector are compared with the calculated values making use of equivalent diffusion parameters in VSOP. Results obtained were favourable for CRs situated within the first ring of reflector blocks, with larger errors obtained for CRs situated further from the core. An additional method that was investigated is the use of equivalent boron concentrations (EBCs) to represent the absorber region. This is shown to be useful if applied correctly and with care especially in the case of differential CR worth. Practical difficulties exist with both approaches, which makes the investigation of an alternative method, which should remove these shortcomings, attractive.

  6. Preliminary Test of a small heat pipe for hybrid control rod in-core passive decay heat removal system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, In Guk; Ban, In Cheol [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

    2014-05-15

    This paper introduces 'Hybrid control rod' combining its original function and heat removal ability. The high temperature operation and high resistance of radiation should be considered to adopt the hybrid heat pipe at the in-core condition. Other design consideration is to make extra inlet parts because it has a high risk of inlet boundary failure. It means that the introduction of heat pipe system is difficult to present nuclear power plants. The other concepts are presented to out-core cooling design but it has low performance compared with in-core heat removal system. Hybrid heat pipe for in-core heat removal system suggests the solution of these problems. Ultimate objective of this research is to develop the passive emergency decay heat removal system using hybrid heat pipes targeting design bases accidents such as station black-out (SBO) and small break loss of coolant accident (SBLOCA). The purpose of this work is to confirm the performance and heat transfer behavior of hybrid heat pipe. The hybrid heat pipe has special condition for operation. Therefore, it is hard to analyze their behavior in core. Table I shows the characteristics of hybrid heat pipe and consideration for manufacturing the heat pipe.

  7. Laser Ultrasonic System for Surface Crack Visualization in Dissimilar Welds of Control Rod Drive Mechanism Assembly of Nuclear Power Plant

    Directory of Open Access Journals (Sweden)

    Yun-Shil Choi

    2014-01-01

    Full Text Available In this paper, we propose a J-groove dissimilar weld crack visualization system based on ultrasonic propagation imaging (UPI technology. A full-scale control rod drive mechanism (CRDM assembly specimen was fabricated to verify the proposed system. An ultrasonic sensor was contacted at one point of the inner surface of the reactor vessel head part of the CRDM assembly. Q-switched laser beams were scanned to generate ultrasonic waves around the weld bead. The localization and sizing of the crack were possible by ultrasonic wave propagation imaging. Furthermore, ultrasonic spectral imaging unveiled frequency components of damage-induced waves, while wavelet-transformed ultrasonic propagation imaging enhanced damage visibility by generating a wave propagation video focused on the frequency component of the damage-induced waves. Dual-directional anomalous wave propagation imaging with adjacent wave subtraction was also developed to enhance the crack visibility regardless of crack orientation and wave propagation direction. In conclusion, the full-scale specimen test demonstrated that the multiple damage visualization tools are very effective in the visualization of J-groove dissimilar weld cracks.

  8. Controlled synthesis of rod-like LiVMoO6 nanocrystals for application in lithium-ion batteries

    Science.gov (United States)

    Liang, Yongguang; Han, Xiaoyan; Cong, Changjie; Yi, Zonghui; Zhou, Liqun; Sun, Jutang; Zhang, Keli; Zhou, Yunhong

    2007-04-01

    This paper reports a newly developed method for the shape and size control of transition metal composite oxides, such as LiVMoO6, to obtain significantly enhanced electrode properties for lithium-ion batteries. Rod-like LiVMoO6 nanocrystals were synthesized through a designed route of partial reduction, self-assembly and re-oxidation. V5+ and Mo6+ ions were used with low-grade starting materials to get a mixed valence of V and Mo. It is believed that ion pairs of V5+/V4+ or Mo6+/Mo5+ in the resultant mixture play an important role in the formation of a template precursor by self-assembly during a rheological phase reaction, although further explanation is required. The electrochemical performance of the LiVMoO6 obtained has been much improved due to the increased crystallinity and reduced particle size of this material. 176 mA h g-1 and 166 mA h g-1 capacity was delivered in the initial discharge with a reversible capacity retention of 94.8% and 95.3% after 100 cycles in the range of 3.6-1.80 V versus metallic Li at 1 and 3 C current rate, respectively.

  9. Approach to criticality in cold core of the Unit 1 of the cycle 10 of the Laguna Verde power plant with control rods similar in design to the original ones and the advanced ones; Aproximacion a criticidad en frio de la Unidad 1 del ciclo 10 de la CLV con barras de control de diseno similar al original y avanzadas

    Energy Technology Data Exchange (ETDEWEB)

    Perusquia, R.; Ramirez, J.R.; Ortiz, J.J.; Hernandez, J.L.; Montes, J.L. [ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico)]. E-mail: rpc@nuclear.inin.mx

    2004-07-01

    In the Laguna Verde power plant (CLV) worn out control bars have been replacing for control rods of advanced design. At the moment of the 109 rods of similar design to the original of the Unit 1 of the CLV, 14 of them have been substituted with two types of different advanced control rods. The same as the original rods the advanced rods use boron carbide as control element for neutrons, but additionally they use hafnium, to achieve a longer useful half life. The rods of similar design to the original are homogeneous axially on the other hand the advanced presenting several zones. In principle the advanced rods were designed to be neutronically compatible to the original rods. However the differences in the design and of constituents assumed to consider a different performance during the operation. Since the one numbers of advanced bars is growing with the number of cycles of the CLV reactor has requested to the National Institute of Nuclear Research (ININ) to evaluate in detailed form the performance of the control rods. Previously the calculations and analysis of cycle design that that were carried out assumed that control rods should be of similar design as the original. Using the HELIOS/CM-LENDS system, the effect of the inclusion of advanced rods was analyzed in the approximation of the criticality in cold (20 C) in the cycle 10 of the Unit 1. Four scenarios were poposed, where the type of the rod of substitution control is varied. The value of reactivity was calculated for the rods similar in design to the original and for the advanced one. By comparison of these values, it was found that the value of reactivity of the control rods of the advanced design was superior to the value for rods similar to the original ones by 7.6% for one of the advanced designs and of 13.6% for the other one. (Author)

  10. ELECTROMAGNETIC APPARATUS FOR MOVING A ROD

    Science.gov (United States)

    Young, J.N.

    1958-04-22

    An electromagnetic apparatus for moving a rod-like member in small steps in either direction is described. The invention has particular application in the reactor field where the reactor control rods must be moved only a small distance and where the use of mechanical couplings is impractical due to the high- pressure seals required. A neutron-absorbing rod is mounted in a housing with gripping uaits that engage the rod, and coils for magnetizing the gripping units to make them grip, shift, and release the rod are located outside the housing.

  11. A Study on the Effectiveness of the Horizontal Shading Device Installation for Passive Control of Buildings in South Korea

    Directory of Open Access Journals (Sweden)

    Seok-Hyun Kim

    2017-01-01

    Full Text Available In South Korea, the evaluation criteria for installing shading devices are defined by regulations, but the standards of design methods are not clearly established. The installation of shading devices has become mandatory for some public buildings due to revised regulations. Therefore, a design of horizontal shading device is required, and indoor environmental problems which may occur due to their installation should also be taken into consideration. This research aimed to propose a design which takes into account the energy consumption which may occur if the horizontal shading device is installed and suggests an improved design method of horizontal shading devices when they are installed. Consequently, it was confirmed that as the protrusion of the horizontal shading device becomes longer, the incoming daylight is reduced and the indoor intensity of illumination becomes lower, and thus more lighting energy may be consumed in a room where the shading device is installed than in the one where it is not. Therefore, annual energy consumption was calculated by applying the lighting control and it was found that the total energy consumption decreased by the reduction of air-conditioning and fans and lighting energy consumption.

  12. Nematic liquid crystals on spherical surfaces: Control of defect configurations by temperature, density, and rod shape

    Science.gov (United States)

    Dhakal, Subas; Solis, Francisco J.; Olvera de la Cruz, Monica

    2012-07-01

    Recent experiments have shown that defect conformations in spherical nematic liquid crystals can be controlled through variations of temperature, shell thickness, and other environmental parameters. These modifications can be understood as a result of the induced changes in the effective elastic constants of the system. To characterize the relation between defect conformations and elastic anisotropy, we carry out Monte Carlo simulations of a nematic on a spherical surface. As the anisotropy is increased, the defects flow from a tetrahedral arrangement to two coalescing pairs and then to a great circle configuration. We also analyze this flow using a variational method based on harmonic configurations.

  13. Analysis of Boron Depletion in HTR Control Rod%高温气冷堆控制棒硼燃耗特性分析

    Institute of Scientific and Technical Information of China (English)

    赵晶; 李富; 刘志宏; 石秀安

    2011-01-01

    控制棒价值及其燃耗规律是核反应堆物理设计关注的要点之一.球床式高温气冷堆控制棒位于侧反射层石墨孔道中,吸收体为圆环形的B4C,其燃耗特性具有特殊性.采用MCNP耦合燃耗计算模块的方法,对控制棒吸收体进行精细划分,分析了各子区域硼的详细燃耗特性及控制棒价值的变化规律.计算结果表明,由于强烈的空间自屏效应,虽然吸收体外层硼燃耗很多,但吸收体内层硼燃耗很少,因此,反应堆运行寿期末控制棒价值减少很小.%The worth of control rod and its change along depletion are one of important features for reactor neutronics design. The control rods in pebble bed high-temperature gas-cooled reactor (HTR) were located in the hole of side graphite reflector. Its absorber was made up of annular B4C, which had special depletion rules. The depletion characteristics in each absorber sub-zone and the changes of the control rod worth were analyzed, based on both the MCNP coupling another depletion module and the detailed modeling control rod absorber region. According to the analysis, the boron in inner region of absorber is depleted only a little, although most of boron in outer region of absorber is depleted, because of the strong space self-shielding effects in control rod absorber. Therefore, the worth of control rod in the HTR decreases just a little at the end of reactor life time.

  14. 压水堆控制棒价值误差分析%Error Analysis for PWR Control Rod Integrate Worth

    Institute of Scientific and Technical Information of China (English)

    付学峰; 王磊; 郑继业; 蔡德昌; 张洪; 李冬生

    2013-01-01

    During physical startup test,the control rod integrate worth is a parameter which is most likely to be overstepped.This paper analyzes the factors which contribute to the control rod worth error and its feature.Typical example is also included.To reduce the control rod error,it is strongly suggested to create an accurate reflector model,select fuel assembly manufacture data as input and consider the control rod worth measurement method and condition when performing the calculation.To identify the main reason of control rod worth error,flux mapping test results,boron concentration and other core parameters should be analyzed comprehensively,combining with the control rod worth error distribution characteristics.%压水堆启动物理试验时,控制棒价值是比较容易超限的一个参数.本文系统分析了影响控制棒价值计算值与测量值偏差的主要因素以及各因素的影响特点、大小,并给出了部分实例分析,以期降低控制棒价值的误差,减少因控制棒价值超差对启动物理试验带来的不利影响,并在控制棒价值超差原因分析时提供帮助.分析表明,为降低控制棒价值误差,需要建立精确、合理的反射层模型,尽可能采用燃料组件的制造参数,控制棒的计算方法要考虑试验方法与工况;将注量率图试验结果、硼浓度和其他堆芯参数与控制棒价值误差分布特点相结合,进行原因查找.

  15. The whole process control of connecting rod production line equipment management%浅谈连杆生产线设备管理全过程控制

    Institute of Scientific and Technical Information of China (English)

    杨萍

    2013-01-01

    The connecting rod is one of the most basic and core components for engine. Combines with the practice of running environment, connecting rod components are effected by alternating load during operation long time and sustained by the force of compression, bending and stretching, thus the need to safeguard the connecting rod parts can have the quality characteristics of smaller, at the same time, has outstanding advantages on the rigidity and strength of the preparation, has the important meaning for the operation of the production line for connecting rod. Based on the actual situation, the equipment management connecting rod production line process control as the research object, to analyze the importance of connecting rod parts, and then combines with the operation rod production line, studies the equipment management measures of the whole process control, hoping to draw special attention to staff.%  连杆是发动机最为基础与核心的组成部件之一。结合实践运行环境来看,连杆部件在运行过程当中长时间且持续性的受到了压缩、弯曲以及拉伸等交变载荷的作用力影响,从而需要保障连杆部件能够具备较小的质量特性,同时在刚度与强度方面具备突出优势,这对于连杆生产线的运行而言也有着重要意义。本文依据这一实际情况,以连杆生产线设备管理全过程控制为研究对象,首先简要分析了连杆部件的重要性,进而结合连杆生产线的作业工序,详细研究了设备管理全过程控制的主要措施,希望能够引起各方工作人员的特别关注与重视。

  16. A Fast Guide Tube Position Estimation Algorithm for a Control Rod Support Pin Inspection Robot

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae C.; Jeon, Hyeong S.; Choi, Yu R.; Kim, Jae H. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2005-07-01

    The risk that PWR guide tube support pins will crack has increased the necessity for the development of inspection methods and equipment. A special remote-controlled manipulator has been widely used to inspect the guide tube support pins. We presented a matched filter algorithm for detecting the existence and estimating the position of the guide tube support pins. But, the matched filter algorithm requires numbers of complex floating point calculations for the 2-D FFT and therefore it can not be fitted in to the small-sized embedded processors. We proposed a new simplified method for estimating the position of the guide tube support pins. It uses most of the operations with integers. We ported the proposed method in intel's xscale processor running at 400 mhz. We used gnu C language in embedded linux operating system. We can calculate the algorithm at a rate of 20 frames/sec. in a 160x120 image size.

  17. Retinal rod GTPase turnover rate increases with concentration: a key to the control of visual excitation?

    Science.gov (United States)

    Dratz, E A; Lewis, J W; Schaechter, L E; Parker, K R; Kliger, D S

    1987-07-31

    Guanosine triphosphate (GTP) binding proteins mediate cellular responses to hormones, neurotransmitters, growth factors and light. Activated GTP binding proteins are shut off by GTPase mediated hydrolysis of GTP. Photoreceptor GTPase rates are reported to be 10-50 times too slow to account for electrophysiological recovery time after light stimulus. Recovery rates of other parts of the system, however, appear fast enough. We present evidence that the GTPase rate increases markedly with photoreceptor membrane concentration implying the existence of a diffusible factor controlling the GTPase. When extrapolated to physiological concentrations, the GTPase turnover rate is fast enough (0.25-1.5 sec) to account for the recovery rate of the light stimulated signal of the photoreceptor cells.

  18. Sino-implant (II) - a levonorgestrel-releasing two-rod implant: systematic review of the randomized controlled trials

    Science.gov (United States)

    Steiner, Markus J.; Lopez, Laureen M.; Grimes, David A.; Cheng, Linan; Shelton, Jim; Trussell, James; Farley, Timothy M.M.; Dorflinger, Laneta

    2013-01-01

    Background Sino-implant (II) is a subdermal contraceptive implant manufactured in China. This two-rod levonorgestrel-releasing implant has the same amount of active ingredient (150 mg levonorgestrel) and mechanism of action as the widely available contraceptive implant Jadelle. We examined randomized controlled trials of Sino-implant (II) for effectiveness and side effects. Study design We searched electronic databases for studies of Sino-implant (II), and then restricted our review to randomized controlled trials. The primary outcome of this review was pregnancy. Results Four randomized trials with a total of 15,943 women assigned to Sino-implant (II) had first-year probabilities of pregnancy ranging from 0.0% to 0.1%. Cumulative probabilities of pregnancy during the four years of the product's approved duration of use were 0.9% and 1.06% in the two trials that presented date for four-year use. Five-year cumulative probabilities of pregnancy ranged from 0.7% to 2.1%. In one trial, the cumulative probability of pregnancy more than doubled during the fifth year (from 0.9% to 2.1%), which may be why the implant is approved for four years of use in China. Five-year cumulative probabilities of discontinuation due to menstrual problems ranged from 12.5% to 15.5% for Sino-implant (II). Conclusions Sino-implant (II) is one of the most effective contraceptives available today. These available clinical data, combined with independent laboratory testing, and the knowledge that 7 million women have used this method since 1994, support the safety and effectiveness of Sino-implant (II). The lower cost of Sino-implant (II) compared with other subdermal implants could improve access to implants in resource-constrained settings. PMID:20159174

  19. The inner rod protein controls substrate switching and needle length in a Salmonella type III secretion system.

    Science.gov (United States)

    Lefebre, Matthew D; Galán, Jorge E

    2014-01-14

    Type III secretion machines are essential for the biology of many bacteria that are pathogenic or symbiotic for animals, plants, or insects. They exert their function by delivering bacterial effector proteins into target eukaryotic cells. The core component of these machines is the needle complex, a multiprotein structure that spans the bacterial envelope and serves as a conduit for proteins that transit this secretion pathway. The needle complex is composed of a multiring base embedded in the bacterial envelope and a filament-like structure, the needle, that projects from the bacterial surface and is linked to the base by the inner rod. Assembly of the needle complex proceeds in a step-wise fashion that is initiated by the assembly of the base and is followed by the export of the building subunits for the needle and inner rod substructures. Once assembled, the needle complex reprograms its specificity and becomes competent for the secretion of effector proteins. Here through genetic, biochemical, and electron microscopy analyses of the Salmonella inner rod protein subunit PrgJ we present evidence that the assembly of the inner rod dictates the timing of substrate switching and needle length. Furthermore, the identification of mutations in PrgJ that specifically alter the hierarchy of protein secretion provides additional support for a complex role of the inner rod substructure in type III secretion.

  20. Chemical State Mapping of Degraded B4C Control Rod Investigated with Soft X-ray Emission Spectrometer in Electron Probe Micro-analysis

    Science.gov (United States)

    Kasada, R.; Ha, Y.; Higuchi, T.; Sakamoto, K.

    2016-05-01

    B4C is widely used as control rods in light water reactors, such as the Fukushima Daiichi nuclear power plant, because it shows excellent neutron absorption and has a high melting point. However, B4C can melt at lower temperatures owing to eutectic interactions with stainless steel and can even evaporate by reacting with high-temperature steam under severe accident conditions. To reduce the risk of recriticality, a precise understanding of the location and chemical state of B in the melt core is necessary. Here we show that a novel soft X-ray emission spectrometer in electron probe microanalysis can help to obtain a chemical state map of B in a modeled control rod after a high-temperature steam oxidation test.

  1. Consumption Index Control of Wire & Rod billet in JISCO%浅谈酒钢炼轧厂线棒坯耗指标体系控制

    Institute of Scientific and Technical Information of China (English)

    李倩倩

    2015-01-01

    本文简述了酒钢炼轧厂线棒坯耗指标控制体系,对影响坯耗的主要因素进行了分析,并提出相关改进措施。%This paper briefly describes the consumption index control system the wire & rod billet in JISCO smelter and roller works.The main factors affecting the billet consumption were analyzed, and improvement measures were proposed.

  2. A New Hybrid Control Architecture to Attenuate Large Horizontal Wind Disturbance for a Small-Scale Unmanned Helicopter

    Directory of Open Access Journals (Sweden)

    Xiaorui Zhu

    2012-07-01

    Full Text Available This paper presents a novel method to attenuate large horizontal wind disturbance for a small‐scale unmanned autonomous helicopter combining wind tunnel‐based experimental data and a backstepping algorithm. Large horizontal wind disturbance is harmful to autonomous helicopters, especially to small ones because of their low inertia and the high cross‐coupling effects among the multiple inputs. In order to achieve more accurate and faster attenuation of large wind disturbance, a new hybrid control architecture is proposed to take advantage of the direct force/moment compensation based on the wind tunnel experimental data. In this architecture, large horizontal wind disturbance is treated as an additional input to the control system instead of a small perturbation around the equilibrium state. A backstepping algorithm is then designed to guarantee the stable convergence of the helicopter to the desired position. The proposed technique is finally evaluated in simulation on the platform, HIROBO Eagle, compared with a traditional wind velocity compensation method.

  3. Results of thermal horizontal completions with sand control in Lake Maracaibo, Venezuela : case histories of horizontal gravel packs in Bachaquero-01 reservoir

    Energy Technology Data Exchange (ETDEWEB)

    Potma, J.J. [Schlumberger, IPM Prisa (Venezuela); Pizzarelli, S.G.; Gonzalez, O.E. [Petroleos de Venezuela SA, Caracas, (Venezuela); Justiniano, P.; Olivares, S.A. [Schlumberger, WCP (Venezuela)

    2002-07-01

    The experience gained through decades of applying vertical steam injection well technology in the heavy oil producing region of Lake Maracaibo in Venezuela was discussed. The oil from the Bachaquero-01 heavy oil reservoir has an API gravity of 12. Petroleum producers made an attempt to optimize production in 1996 by drilling wells with 1000 ft of horizontal section and then injecting steam. However, the initial production of 1000 BOPD dropped by 50 per cent within 4 months. A NODAL production system analysis calculation suggested that the best remedy would be to apply horizontal gravel packs to allow for more permeability compared to natural sand packs. Gravel packing of the horizontal thermal wells began in October 2000 during a drilling and completion campaign in which 18 wells were successfully gravel packed. The average production for 6 of the wells increased by 135 BOPD after 8 months compared to 9 nearby nongravel-packed horizontal wells, representing an 18 per cent higher production rate than the declining rate of the nongravel-packed wells. After one year, productivity increased by an average of 15 per cent with no sand production. Gravelpack operations were conducted at a pump rate of 2 to 3 bbl/min with a sand concentration of 0.5 to 0.7 pounds of proppant per gallon added. This maintained continuous fluid returns of 50 to 80 per cent. 18 refs., 2 tabs., 7 figs.

  4. Automatic safety rod for reactors. [LMFBR

    Science.gov (United States)

    Germer, J.H.

    1982-03-23

    An automatic safety rod for a nuclear reactor containing neutron absorbing material and designed to be inserted into a reactor core after a loss-of-flow. Actuation is based upon either a sudden decrease in core pressure drop or the pressure drop decreases below a predetermined minimum value. The automatic control rod includes a pressure regulating device whereby a controlled decrease in operating pressure due to reduced coolant flow does not cause the rod to drop into the core.

  5. Calculation of the Phenix end-of-life test 'Control Rod Withdrawal' with the ERANOS code

    Energy Technology Data Exchange (ETDEWEB)

    Tiberi, V. [Institut de Radioprotection et de Surete Nucleaire IRSN, PSN-EXP/SNC/LNR, BP 17, 92262 Fontenay-aux-Roses (France)

    2012-07-01

    The Inst. of Radiological Protection and Nuclear Safety (IRSN) acts as technical support to French public authorities. As such, IRSN is in charge of safety assessment of operating and under construction reactors, as well as future projects. In this framework, one current objective of IRSN is to evaluate the ability and accuracy of numerical tools to foresee consequences of accidents. Neutronic studies step in the safety assessment from different points of view among which the core design and its protection system. They are necessary to evaluate the core behavior in case of accident in order to assess the integrity of the first barrier and the absence of a prompt criticality risk. To reach this objective one main physical quantity has to be evaluated accurately: the neutronic power distribution in core during whole reactor lifetime. Phenix end of life tests, carried out in 2009, aim at increasing the experience feedback on sodium cooled fast reactors. These experiments have been done in the framework of the development of the 4. generation of nuclear reactors. Ten tests have been carried out: 6 on neutronic and fuel aspects, 2 on thermal hydraulics and 2 for the emergency shutdown. Two of them have been chosen for an international exercise on thermal hydraulics and neutronics in the frame of an IAEA Coordinated Research Project. Concerning neutronics, the Control Rod Withdrawal test is relevant for safety because it allows evaluating the capability of calculation tools to compute the radial power distribution on fast reactors core configurations in which the flux field is very deformed. IRSN participated to this benchmark with the ERANOS code developed by CEA for fast reactors studies. This paper presents the results obtained in the framework of the benchmark activity. A relatively good agreement was found with available measures considering the approximations done in the modeling. The work underlines the importance of burn-up calculations in order to have a fine

  6. Safety rod latch inspection

    Energy Technology Data Exchange (ETDEWEB)

    Leader, D.R.

    1992-02-01

    During an attempt to raise control rods from the 100 K reactor in December, one rod could not be withdrawn. Subsequent investigation revealed that a small button'' in the latch mechanism had broken off of the lock plunger'' and was wedged in a position that prevented rod withdrawal. Concern that this failure may have resulted from corrosion or some other metallurgical problem resulted in a request that SRL examine six typical latch mechanisms from the 100 L reactor by use of radiography and metallography. During the examination of the L-Area latches, a failed latch mechanism from the 100 K reactor was added to the investigation. Fourteen latches that had a history of problems were removed from K-Area and sent to SRL for inclusion in this study the week after the original seven assemblies were examined, bringing the total of latch assemblies discussed in this report to twenty one. Results of the examination of the K-Area latch that initiated this study is not included in this report.

  7. Safety rod latch inspection

    Energy Technology Data Exchange (ETDEWEB)

    Leader, D.R.

    1992-02-01

    During an attempt to raise control rods from the 100 K reactor in December, one rod could not be withdrawn. Subsequent investigation revealed that a small ``button`` in the latch mechanism had broken off of the ``lock plunger`` and was wedged in a position that prevented rod withdrawal. Concern that this failure may have resulted from corrosion or some other metallurgical problem resulted in a request that SRL examine six typical latch mechanisms from the 100 L reactor by use of radiography and metallography. During the examination of the L-Area latches, a failed latch mechanism from the 100 K reactor was added to the investigation. Fourteen latches that had a history of problems were removed from K-Area and sent to SRL for inclusion in this study the week after the original seven assemblies were examined, bringing the total of latch assemblies discussed in this report to twenty one. Results of the examination of the K-Area latch that initiated this study is not included in this report.

  8. A novel design of feedback control system for plasma horizontal position in IR-T1 tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Naghidokht, A.; Khodabakhsh, R. [Department of physics, Urmia University, Urmia (Iran, Islamic Republic of); Salar Elahi, A., E-mail: Salari_phy@yahoo.com [Plasma Physics Research Center, Science and Research Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of); Ghoranneviss, M. [Plasma Physics Research Center, Science and Research Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of)

    2016-06-15

    Determination of accurate plasma horizontal position during plasma discharge is essential to transport it to a control system based on feedback. By using the plasma-circuits linearized model, Proportional Integral Derivative (PID) based controllers and a first order transfer function representing the power supply (PS) dynamics of vertical coil system for IR-T1 tokamak, we analyzed step feedback response of the overall system of IR-T1 tokamak and corresponding Bode diagrams for two cases with and without the plasma resistance and the eddy currents distribution. Also we did experiments for determination of plasma horizontal displacement in this tokamak. This work is done by four magnetic probes that are installed on the circular contour of the tokamak. This data used as input to the feedback controller to validate the performance of it. Results of feedback response analysis show that the controller has good performance. Due to approximations in the controller design, construction, installation and implementation of the controller is necessary and this is the purpose of our future works.

  9. Early repolarization with horizontal ST segment may be associated with aborted sudden cardiac arrest: a retrospective case control study

    Directory of Open Access Journals (Sweden)

    Kim Sung

    2012-12-01

    Full Text Available Abstract Background Risk stratification of the early repolarization pattern (ERP is needed to identify malignant early repolarization. J-point elevation with a horizontal ST segment was recently suggested as a malignant feature of the ERP. In this study, the prevalence of the ERP with a horizontal ST segment was examined among survivors of sudden cardiac arrest (SCA without structural heart disease to evaluate the value of ST-segment morphology in risk stratification of the ERP. Methods We reviewed the data of 83 survivors of SCA who were admitted from August 2005 to August 2010. Among them, 25 subjects without structural heart disease were included. The control group comprised 60 healthy subjects who visited our health promotion center; all control subjects were matched for age, sex, and underlying disease (diabetes mellitus, hypertension. Early repolarization was defined as an elevation of the J point of at least 0.1 mV above the baseline in at least two continuous inferior or lateral leads that manifested as QRS slurring or notching. An ST-segment pattern of Results The SCA group included 17 men (64% with a mean age of 49.7 ± 14.5 years. The corrected QTc was not significantly different between the SCA and control groups (432.7 ± 37.96 vs. 420.4 ± 26.3, respectively; p = 0.089. The prevalence of ERP was not statistically different between the SCA and control groups (5/25, 20% vs. 4/60, 6.7%, respectively; p = 0.116. The prevalence of early repolarization with a horizontal ST segment was more frequent in the SCA than in the control group (20% vs. 3.3%, respectively; p = 0.021. Four SCA subjects (16% and one control subject (1.7% had a J-point elevation of >2 mm (p = 0.025. Four SCA subjects (16% and one (1.7% control subject had an ERP in the inferior lead (p = 0.025. Conclusion The prevalence of ERP with a horizontal ST segment was higher in patients with aborted SCA than in matched controls. This result suggests that ST morphology has

  10. Control of the light-regulated current in rod photoreceptors by cyclic GMP, calcium, and l-cis-diltiazem.

    Science.gov (United States)

    Stern, J H; Kaupp, U B; MacLeish, P R

    1986-02-01

    The effect of calcium ions on the cGMP-activated current of outer segment membrane was examined by the excised-patch technique. Changes in the extracellular calcium concentration had marked effects on the cGMP-activated current, while changes in intracellular calcium concentration were ineffective. Changes in calcium concentration in the absence of cGMP had little, if any, effect on membrane conductance. These results suggest that both intracellular cGMP and extracellular calcium can directly affect the conductance underlying the light response in rod cells. The pharmacological agent l-cis-diltiazem reversibly inhibited the cGMP-activated current when applied to the intracellular side of an excised patch. When superfused over intact rod cells, l-cis-diltiazem reversibly blocked much of the normal light response. The isomer, d-cis-diltiazem, did not significantly affect either patches or intact rod cells. Thus, the light-regulated conductance has binding sites for both calcium and cGMP that may interact during the normal light response in rod cells and a site specific for l-cis-diltiazem that can be used to identify and further study the conductance mechanism.

  11. Blast Rod automatic regulation and control research and application%高炉探尺自动调节控制的研究与应用

    Institute of Scientific and Technical Information of China (English)

    孔祥珍

    2013-01-01

    Solved automatically adjust furnace Rod sluggish and inverted hammer different problems,to achieve a more accurate detection probe foot feed line.This paper describes the PLC automatic control system,according to the blast furnace feed line Rod dynamic market calculations,allowing personnel to more accurately smelting blast furnace operations,improve smelting intensity.%  自动调节解决了高炉探尺的呆滞及倒锤等不同的问题,实现了探尺更加精确地检测料线。本文主要介绍PLC自动调节系统,可以根据高炉探尺料线进行动态市场计算,可以让冶炼人员更加准确地操作高炉,提高冶炼的强度。

  12. Controlling and Monitoring of Con-rod Bearing%发动机轴瓦损伤的控制及监测

    Institute of Scientific and Technical Information of China (English)

    盛仁斌; 张朝辉; 沈磊; 陈潇文; 陈健; 李逢春; 汤洌波; 苏铅

    2015-01-01

    Failure of con-rod bearing of the EA888 engine occurred during its vehicle roller test. After a long-time trace and analysis, improvement was made in controlling and optimizing of part dimensions. The improvement did not help much in solving the problem. In order to reduce the complains of the users, a way to controlling and monitoring of con-rod bearing is employed during cold test to separate the engine with high risk of con-rod bearing failure, which improves engine quality.%EA888发动机连杆轴瓦在整车转毂试验过程中出现失效,通过对问题的长期跟踪与分析,制定出改进措施,首先控制与优化零件尺寸,但效果不明显。在未找到根本原因的情况下,减少了用户的抱怨,在发动机冷试过程中,采用冷试活塞上止点位置时域监控法,将存在连杆轴瓦潜在失效风险的发动机隔离,提升生产过程中发动机的实物质量。

  13. Research on Reactor Rod Control Indicating System Based on FPGA%基于FPGA的数字化棒控技术研究

    Institute of Scientific and Technical Information of China (English)

    蔡晨

    2016-01-01

    A application of FPGA (Field Programmable Gate Array)in reactor rod control a indicating system is presented.To take advantage of plentiful logic elements and flexible programmable characteristic of FPGA, the complex logic circuits in reactor rod control and rod position indicating system are integrated in one FPGA chip.The application of FPGA eliminates the intrinsic defects of traditional analog integrated circuit and improves the reliability and stability of system.With simple circuit structure, the system has high anti-noise performance and characteristic of miniaturization.%本文介绍了将FPGA(Field Programmable Gate Array现场可编程逻辑阵列)技术应用于反应堆棒控系统的概况。利用FPGA丰富的逻辑资源,编程的灵活性等特点来实现反应堆棒控系统的复杂逻辑电路,电路结构简单明了,将大量复杂的逻辑电路集成到一块FPGA芯片中,提高了系统的可靠性与稳定性,解决了原有模拟电路的很多固有缺陷,提高了系统的抗干扰性能,实现了设备数字化与小型化。

  14. AP1000控制棒棒位的数字化测量技术分析%Technical Analysis of Digital Measurement in AP1000 Control Rods

    Institute of Scientific and Technical Information of China (English)

    彭小强; 郑养波

    2012-01-01

    结合AP1000的数字化棒位指示系统,通过分析AP1000控制棒的组成、控制棒驱动机构和棒位测量探测器布置,并从数字化测量角度指出了非接触式传感器测量、探测线圈的冗余设计和数字化数据传输等可靠性技术的应用,确保了AP1000反应堆棒位测量精度和棒位控制系统的安全可靠.%It analyzes the control rods、RDM and rod position measurement detector layout based on AP1000 digital rod position system. At the same time, the application of high reliability technologies in AP1000, such as non - contact sensor measurements 、 the redundant design of detection coil and digital data transmission, which can ensure the accuracy of rod position measurement and the safety and reliability of control system in AP1000.

  15. Role of horizontal gene transfer as a control on the coevolution of ribosomal proteins and the genetic code

    Energy Technology Data Exchange (ETDEWEB)

    Woese, Carl R.; Goldenfeld, Nigel; Luthey-Schulten, Zaida

    2011-03-31

    Our main goal is to develop the conceptual and computational tools necessary to understand the evolution of the universal processes of translation and replication and to identify events of horizontal gene transfer that occurred within the components. We will attempt to uncover the major evolutionary transitions that accompanied the development of protein synthesis by the ribosome and associated components of the translation apparatus. Our project goes beyond standard genomic approaches to explore homologs that are represented at both the structure and sequence level. Accordingly, use of structural phylogenetic analysis allows us to probe further back into deep evolutionary time than competing approaches, permitting greater resolution of primitive folds and structures. Specifically, our work focuses on the elements of translation, ranging from the emergence of the canonical genetic code to the evolution of specific protein folds, mediated by the predominance of horizontal gene transfer in early life. A unique element of this study is the explicit accounting for the impact of phenotype selection on translation, through a coevolutionary control mechanism. Our work contributes to DOE mission objectives through: (1) sophisticated computer simulation of protein dynamics and evolution, and the further refinement of techniques for structural phylogeny, which complement sequence information, leading to improved annotation of genomic databases; (2) development of evolutionary approaches to exploring cellular function and machinery in an integrated way; and (3) documentation of the phenotype interaction with translation over evolutionary time, reflecting the system response to changing selection pressures through horizontal gene transfer.

  16. 压水堆驱动线落棒历程计算%Calculation of Drop Course of Control Rod Assembly in PWR

    Institute of Scientific and Technical Information of China (English)

    周肖佳; 毛飞; 闵鹏; 林绍萱

    2013-01-01

    控制棒落棒性能验证是核电厂安全分析的重要部分,研制驱动线落棒历程计算程序有利于验证和改进控制棒驱动线设计。基于驱动线结构特点,分析运动组件的受力情况并进行分解,选择理论或数值方法逐一求取各分力的瞬态值,从而建立驱动线落棒历程的循环步进计算程序。利用秦山核电二期工程驱动线落棒性能试验数据对理论模型和程序计算结果进行对比验证。结果证明:所建立的驱动线落棒历程计算程序适用于压水堆驱动线系统,能正确地对运动组件落棒受力与运动历程进行模拟。%The validation of control rod drop performance is an important part of safety analysis of nuclear power plant .Development of computer code for calculating control rod drop course will be useful for validating and improving the design of control rod drive line .Based on structural features of the drive line ,the driving force on moving assembly was analyzed and decomposed ,the transient value of each component of the driving force was calculated by choosing either theoretical method or numerical method , and the simulation code for calculating rod cluster control assembly (RCCA) drop course by time step increase was achieved .The analysis results of control rod assembly drop course calculated by theoretical model and numerical method were validated by comparing with RCCA drop test data of Qinshan Phase Ⅱ 600 MW PWR .It is shown that the developed RCCA drop course calculation code is suitable for RCCA in PWR and can correctly simulate the drop course and the stress of RCCA .

  17. A methodology for obtaining the control rods patterns in a BWR using systems based on ants colonies; Una metodologia para obtener los patrones de barras de control en un BWR usando sistemas basados en colonias de hormigas

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz S, J.J. [Depto. de Sistemas Nucleares, ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Requena R, I. [Universidad de Granada, 18071 Granada (Spain)]. e-mail: jjortiz@nuclear.inin.mx

    2003-07-01

    In this work the AZCATL-PBC system based on a technique of ants colonies for the search of control rods patterns of those reactors of the Nuclear Power station of Laguna Verde (CNLV) is presented. The technique was applied to a transition cycle and one of balance. For both cycles they were compared the k{sub ef} values obtained with a Haling calculation and the control rods pattern proposed by AZCATL-PBC for a burnt one fixed. It was found that the methodology is able to extend the length of the cycle with respect to the Haling prediction, maintaining sure to the reactor. (Author)

  18. A model for open-close control of cation channels in the plasma membrane of retinal rod outer segments.

    Science.gov (United States)

    Ichikawa, K

    1989-06-01

    A model for open-close control of cation channels in the plasma membrane of retinal rod outer segments is presented. A channel is assumed to open when 3 cGMP molecules bind to it and close as soon as one of the 3 cGMP molecules is released from it. The calcium ion (divalent cation) is a modulator of the channel conductance. The channel conductance is low when Ca2+ binds to it, while it is high when it is free from Ca2+. From the above assumptions, the reaction scheme of channels with cGMP and Ca2+ is created and the fraction of channels in the open and closed states was calculated using equations for this scheme. The kinetic constants used in the model are estimated from the experimental results of many studies and from the theories. From this estimation, it was found that at the physiological concentrations of intracellular and extracellular Ca2+, almost all channels are bound with Ca2+ and are in the low conductance state. The present model accounts for the reported dose(cGMP)-response(membrane current or conductance) relationship, where the Hill coefficient decreases as the cGMP concentration increases. The dark-level cGMP concentration of 8.13 microM is estimated from the model. This is in good agreement with the reported values. Moreover, the model predicts the invariance of current noise at relatively low Ca2+ concentrations when the cGMP concentration is raised from the dark level to a saturation level. The dynamic properties (opening and closing actions) of the channels in the present model are also in good agreement with the reported observations. The burst mode opening and closing of a channel is predicted by the present model, and it was found that the number of openings in a burst is controlled by the forward and backward rate constants between a channel protein and cGMP molecules. The simulated waveform of a single channel is similar to the reported observations.

  19. Modernization project of the rod control system and in-core instrumentation system for 34 units of the 900 MW French EDF fleet

    Energy Technology Data Exchange (ETDEWEB)

    Tavolara, Ivan [Rolls-Royce, Civil Nuclear Business, Instrumentation and Controls, 23, Chemin du Vieux Chene 38246 Meylan-Cedex (France); Verburgh, Pierre [Cegelec SA, Energy Control and Systems, Rue Santos Dumont 3, 6041 Gosselies (Belgium); Menager, Antoine [EDF Engineering Department for Nuclear Plants In Operation (CIPN), 140, avenue Viton, 13401 Marseille Cedex 20 (France)

    2010-07-01

    Rolls-Royce and Cegelec, in partnership, carry out a unique and considerable modernisation project of two Instrumentation and Control (I and C) systems for the entire 900 MWe fleet of Electricite De France (EDF). Both rod control (RCS) and reactor in-core measurement (RIC) systems are to be modernised in the frame of the third ten-year renovation of all 34 reactor units over 9 power plants. The RCS contributes to the control of nuclear power by actuating control rod drive mechanisms that allow insertion or withdrawal of control rods. The RCS has also monitoring functions such as controlling the actual rods' position as well as the functional consistency between commands and actual positions. The RIC system measures in-core neutron flux, providing useful information to the control room as well as to the reactor unit computer for further processing. The renovated systems shall replace the existing ageing analog technology by modern digital technology based on PLC (Programmable Logic Controllers) and FPGA (Field-Programmable Gate Array) in the case of power subassemblies of RCS. Both systems rely for certain functions on a common network linking the RCS and RIC networks, improving operations and maintenance thanks to a powerful Man Machine Interface at the different locations of the systems with an extensive suite of tools and diagnostic menus. The project whose design phase started in July 2006 is now in its deployment phase after the successful site implementation of both systems at the first units of Tricastin and Fessenheim power plants, respectively in August 2009 and February 2010. The deployment shall continue with the other 32 units until 2020. Rolls-Royce has a broad range of civil nuclear expertise, including work related to licensing and safety reviews, engineering design, supply chain management, manufacturing, installation and commissioning of the nuclear island systems and equipment, as well as operational management through life support. Cegelec

  20. Common Cause Failure Analysis of Control Rods and Drives in the Swedish and Finnish BWR Plants. Operating Experiences in 1983 - 2003

    Energy Technology Data Exchange (ETDEWEB)

    Mankamo, Tuomas [Avaplan Oy, Espoo (Finland)

    2006-11-15

    The control rod and drives in a Boiling Water Reactor (BWR) constitute a highly redundant system. The reliability of the system is determined by how well the design withstands dependencies, as Common Cause Failures (CCFs). This report upgrades an earlier data collection on CCFs of control rod and drives (SKI Report 1996:77) to more recent years, with the objective to report the data to ICDE project (International Common Cause Failure Data Exchange) and to the safety analysts in the Nordic countries. The operating experiences were analyzed at the BWRs of former Asea-Atom design, comprising 9 units in Sweden and Olkiluoto 1 and 2 in Finland, covering years 1983 - 2003. A new logical scheme was developed to classify interconnected failure modes of the two redundant functions for reactivity shutdown, fast hydraulic insertion and slower screw insertion of control rods. The scheme makes an explicit distinction between the different attributes of the failure event: - affected function - affected movement direction - detectability - criticality, i.e. inoperable control rod function versus only degraded functionality Another novel idea emerged for grouping the events according to generic failure mechanism. The generic classes will help to organize and structure the information efficiently, because in most cases within a class, the failure modes prove to be same, or there are only a few alternatives to chose from. From the set of 72 candidate cases, altogether 27 actual or more significant potential CCFs were screened out. Special emphasis was placed to identify any multiple failure or degradation indicating that adjacent rods would be more vulnerable to failure, because such phenomena are far more critical for reactivity shutdown as compared to failure of randomly placed rods. Only slight tendency of position dependence could be determined. Another positive insight is that the events, where foreign objects caused the jamming of rod insertion, were separated by both

  1. Introduction to Quality Control of Oil Cylinder Piston Rod%浅谈油缸活塞杆的质量控制

    Institute of Scientific and Technical Information of China (English)

    孙俊玲

    2014-01-01

    The hydraulic cylinder is an important assembly in hydraulic systems ,is widely used in engineering machinery ,and the piston rod is an important part of hyduaulic cylinder .Combining with an example of piston rod failure ,this paper points out the quality of coating on piston rod directly affects the service life and reliability of hydraulic cylinder .The causes for failure of electric plating are analyzed ,the study results can provide a basis for the quality control of coating .%液压缸是液压系统中重要的执行部件,在工程机械中有着广泛的应用,而支持活塞做功的连接部件---活塞杆是液压缸的重要部件。结合一活塞杆电镀层受损实例,阐述了镀层质量的好坏直接影响到整个液压缸的寿命和可靠性,同时分析了电镀层失效的原因,为后续镀层的质量控制提供了依据。

  2. Horizontal Accelerator

    Data.gov (United States)

    Federal Laboratory Consortium — The Horizontal Accelerator (HA) Facility is a versatile research tool available for use on projects requiring simulation of the crash environment. The HA Facility is...

  3. Partidos legislativos e governo de coalizão: controle horizontal das políticas públicas

    Directory of Open Access Journals (Sweden)

    Magna Inácio

    2015-08-01

    Full Text Available ResumoEste artigo investiga a dinâmica de controle político entre Executivo e Legislativo sob o presidencialismo de coalizão no Brasil, com foco nos efeitos da delegação das tarefas de governo para o gabinete multipartidário. Argumentamos que as chances de controle horizontal, relativo ao monitoramento mútuo entre os partidos da coalizão, variam de acordo com o partido, o gabinete ministerial e as características das comissões parlamentares. O referente empírico da análise corresponde aos gabinetes presidenciais no Brasil no período de 1995 a 2010. Os resultados demonstram que a capacidade de controle horizontal de uma área de política pelo partido ministerial está relacionada à área temática considerada, às características da coalizão governante e aos partidos que ocupam os ministérios.

  4. Effect of a protruding rod-supported disk on the drag of a nose-controlled cylinder

    Science.gov (United States)

    Mikhalev, A. N.; Podlaskin, A. B.; Tomson, S. G.

    2008-04-01

    The drag C x of a cylinder of diameter D with a front protruding disk supported on a rod of length l has been studied as a function of the relative distance l/D under the conditions of high (supersonic) flight velocities. It is established that the optimum (minimum) drug C x exists, the value of which agrees with the results of numerical simulations.

  5. Application of IGBT in Rod Control System of Nuclear Power Station%IGBT在核电站棒控系统中的应用

    Institute of Scientific and Technical Information of China (English)

    许育周; 李涛; 王春生

    2014-01-01

    针对目前基于可控硅的核电站棒控系统存在输出电流纹波大、电流上升和下降时间长等特点,提出了基于绝缘栅双模型晶体管( IGBT)的捧控系统。 IGBT作为新型大功率开关器件,具有电压型控制、输入阻抗大、驱动功率小、控制电路简单、开关损耗小、工作频率高和元件容量大等优点。实际应用表明,IGBT减小了棒控系统输出的电流纹波和电流上升、下降时间,十分适合应用于核电站棒控系统中。%At present, most of the rod control system in nuclear power stations are using SCR, so the ripple of output current is big, and the rising time and calling time of the current are long, to overcome this demerits, the rod control system based on IGBT is proposed. IGBT is a new type of large power switching device; it features voltage control, high input impedance, small driving power, simple control circuit, low switching loss, high working frequency and large capacity. Practical application shows that the ripple and current rising and falling time are decreased, this shows that IGBT is suitable for application of rod control system in nuclear power station.

  6. Tie rod insertion test

    CERN Multimedia

    B. LEVESY

    2002-01-01

    The superconducting coil is inserted in the outer vaccum tank and supported by a set of tie rods. These tie rods are made of titanium alloy. This test reproduce the final insertion of the tie rods inside the outer vacuum tank.

  7. Fall simulation of a control rod in Trillo Nuclear Power Plant with CASMO-4/SIMULATE-3; Simulacion de la caida de un dedo de una barra de control en C.N. Trillo con CASMO-4/SIMULATE-3

    Energy Technology Data Exchange (ETDEWEB)

    Bermejo, J. A.; Crespo, A.; Novo, M.; Ruiz, J. M.

    2010-07-01

    As of the general model CASMO-4/SIMULATE-3, two new models has been developed to analyze in detail the effect of a finger fall of a control rod in the power element and in the adjacent elements. It is also possible to analyze the theoretical response of LVD and KMS systems before such events.

  8. Tunneling Horizontal IEC 61850 Traffic through Audio Video Bridging Streams for Flexible Microgrid Control and Protection

    Directory of Open Access Journals (Sweden)

    Michael Short

    2016-03-01

    Full Text Available In this paper, it is argued that some low-level aspects of the usual IEC 61850 mapping to Ethernet are not well suited to microgrids due to their dynamic nature and geographical distribution as compared to substations. It is proposed that the integration of IEEE time-sensitive networking (TSN concepts (which are currently implemented as audio video bridging (AVB technologies within an IEC 61850 / Manufacturing Message Specification framework provides a flexible and reconfigurable platform capable of overcoming such issues. A prototype test platform and bump-in-the-wire device for tunneling horizontal traffic through AVB are described. Experimental results are presented for sending IEC 61850 GOOSE (generic object oriented substation events and SV (sampled values messages through AVB tunnels. The obtained results verify that IEC 61850 event and sampled data may be reliably transported within the proposed framework with very low latency, even over a congested network. It is argued that since AVB streams can be flexibly configured from one or more central locations, and bandwidth reserved for their data ensuring predictability of delivery, this gives a solution which seems significantly more reliable than a pure MMS-based solution.

  9. Optimization of sand control liner designs for Leismer SAGD demonstration horizontal wells

    Energy Technology Data Exchange (ETDEWEB)

    Xie, J. [C-FER Technologies, Edmonton, AB (Canada); Solvoll, T.A. [StatoilHydro Canada Ltd., Calgary, AB (Canada)

    2009-07-01

    The Leismer demonstration project has been planned as part of the larger Kai Kos Dehseh oilsands project owned by StatoilHydro. The project will consist initially of 23 horizontal well pairs distributed over 4 wellpads. Slotted liner and screen designs for the Leismer steam assisted gravity drainage (SAGD) wells were presented in this study. Finite element analyses were conducted to study the impact of the liner's weight and open flow area (OFA) on system performance. The model considered elastic-plastic material responses and deformations that might occur during SAGD applications. The criteria investigated in this study included collapse capacity; installation load limits; thermal strain loading; and slot or wire-spacing opening and closings. The analysis showed that liner weight and slot density have a significant impact on slotted liner performance. It was concluded that the designs provide optimized open flow areas (OFA), acceptable sand screen functionality, and enhanced structural capacities to sustain installation and operational loads over the lifetime of both producer and injector wells. 4 refs., 15 figs.

  10. Noncatalytic cGMP-binding sites of amphibian rod cGMP phosphodiesterase control interaction with its inhibitory gamma-subunits. A putative regulatory mechanism of the rod photoresponse.

    Science.gov (United States)

    Arshavsky, V Y; Dumke, C L; Bownds, M D

    1992-12-05

    The cGMP phosphodiesterase (PDE) of retinal rods plays a central role in phototransduction. Illumination leads to its activation by a rod G-protein (Gt, transducin), thus causing a decrease in intracellular cGMP concentration, closure of plasma membrane cationic channels gated by cGMP, and development of the photoresponse. The PDE holoenzyme is an alpha beta gamma 2 tetramer. The alpha- and beta-subunits each contain one catalytic and one, or possibly two, noncatalytic cGMP-binding sites. Two identical gamma-subunits serve as protein inhibitors of the enzyme. Their inhibition is removed when they bind to Gt-GTP during PDE activation. Here we report that the noncatalytic cGMP-binding sites regulate the binding of PDE alpha beta with PDE gamma and as a result determine the mechanism of PDE activation by Gt. If the noncatalytic sites are empty, Gt-GTP physically removes PDE gamma from PDE alpha beta upon activation. Alternatively, if the noncatalytic sites are occupied by cGMP, Gt-GTP releases PDE gamma inhibitory action but remains bound in a complex with the PDE heterotetramer. The kinetic parameters of activated PDE in these two cases are indistinguishable. This mechanism appears to have two implications for the physiology of photoreceptor cells. First, the tight binding of PDE gamma with PDE alpha beta when the noncatalytic sites are occupied by cGMP may be responsible for the low level of basal PDE activity observed in dark-adapted cells. Second, occupancy of the noncatalytic sites ultimately controls the rate of PDE inactivation (cf. Arshavsky, V. Yu., and Bownds, M. D. (1992) Nature 357, 416-417), for the GTPase activity that terminates PDE activity is slower when these sites are occupied and Gt stays in a complex with PDE holoenzyme. In contrast GTPase acceleration is maximal when the noncatalytic sites are empty and Gt-PDE gamma dissociates from PDE alpha beta. Because cGMP levels are known to decrease upon illumination over a concentration range

  11. Determination of power peak factor using control rods, ex-core detectors and neural networks; Determinacao do fator de pico de potencia utilizando barras de controle, detectores ex-core e redes neurais

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Rose Mary Gomes do Prado

    2005-07-01

    This work presents a methodology based on the artificial neural network technique to predict in real time the power peak factor in a form that can be implemented in reactor protection systems. The neural network inputs were those available in the reactor protection systems, namely, the axial and quadrant power differences obtained from measured ex-core detector signals, and the position of control rods. The response of ex core detector signals was measured in experiments especially performed in the IPEN/MB-01 zero-power reactor. Several reactor states with different power density distribution were obtained by positioning the control rods in different configurations. The power distribution and its peak factor were calculated for each of these reactor states using the Citation code. The obtained results show that the power peak factor correlates well with the control rod position and the quadrant power difference, and with a lesser degree with the axial power differences. The data presented an inherent organisation and could be classified into different classes of power peak factor behaviour as a function of position of control rods, axial power difference and quadrant power difference. The RBF networks were able to identify classes and interpolate the power peak factor values. The relative error for the power peak factor estimation ranged from 0.19 % to 0.67 %, less than the one that was obtained performing a power density distribution map with in-core detectors. It was observed that the positions of control rods bear the detailed and localised information about the power density distribution, and that the axial and the quadrant power difference describe its global variations in the axial and radial directions. The results showed that the RBF and MLP networks produced similar results, and that a neural network correlation can be implemented in power reactor protection systems. (author)

  12. The ATWS analysis of one control rod withdraw out of the HTR-10GT core in addition with bypass valve failure

    Energy Technology Data Exchange (ETDEWEB)

    Lang, Minggang, E-mail: langmg@tsinghua.edu.cn [Institute of Nuclear and New Energy Technology, Tsinghua University, Room 207, Building B, Nengkelou, Beijing (China); Dong, Yujie [Institute of Nuclear and New Energy Technology, Tsinghua University, Room 503, Building A, Nengkelou, Beijing (China)

    2014-05-01

    The 10 MW high temperature gas cooled test reactor (HTR-10) has been built in Institute of Nuclear and New Energy Technology (INET) and has been operating successfully since the beginning of 2003. The core outlet temperature of HTR-10 is 700 °C. To verify the technology of gas-turbine direct cycle, at first INET had a plan to increase its core outlet temperature to 750 °C and use a helium gas turbine instead of the steam generator (then the reactor is called HTR-10GT). Though HTR-10 has good intrinsic safety, the design basic accidents and beyond design basic accidents of HTR10-GT must be analyzed according to China's nuclear regulations due to changed operation parameters. THERMIX code system is used to study the ATWS accident of one control rod withdrawal out of the core by a mistake. After a control rod in the side reflector was withdrawn out at a speed of 1 cm/s by a mistake, a positive reactivity was inserted and the reactor power increased and the temperature of the core increased. When the neutron flux of power measuring range exceeded 123% and the core outlet temperature was greater than 800 °C, the reactor should scram. It was supposed that all the control rods in the reflectors had been blocked and the reactor could not scram. Thus the accident went on and the core temperature and the system pressure increased but the reactor shutdown at last because of its natural negative temperature reactivity feedback mechanism, in spite of the failure of bypass valve. The residual heat would be removed out of the core by the cavity cooling system. During the accident sequence the maximum fuel temperature was 1283.3 °C. It was a litter than 1230 °C – the fuel temperature limitation of HTR-10. Now the sphere fuel used in HTR-10GT will also be used in HTR-PM and the temperature limitation will be raised to 1620 °C, so the HTR-10GT is safe during the ATWS of one control rod withdrawal out of the core. The paper also compares the analysis result of HTR10-GT

  13. Controllable synthesis of flower- and rod-like ZnO nanostructures by simply tuning the ratio of sodium hydroxide to zinc acetate

    Science.gov (United States)

    Zhang, Yunyan; Mu, Jin

    2007-02-01

    A controlled synthesis of flower- and rod-like ZnO nanostructures in a hydrothermal phase has been realized in the absence of an additional template. The well-defined morphologies are obtained by simply tuning the ratio of sodium hydroxide to zinc acetate in a narrow range. The products are characterized by powder x-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The growth mechanism is suggested to be that the supersaturation of the precursor Zn(OH)42- results in various nucleation habits, which induce the ZnO nanostructures with different morphologies.

  14. Control Rod Ejection Accident while Using 6- and 8-Tube IRT-4M Fuel Assemblies in WWR-SM Research Reactor Core

    Energy Technology Data Exchange (ETDEWEB)

    Baytelesov, S.; Kungurov, F.; Safarov, A.; Salikhbaev, U.

    2011-07-01

    The WWR-SM reactor at the Institute of Nuclear Physics of the Academy of Sciences (INP AS) in Uzbekistan was converted to 6-tube IRT-4M LEU (19.7%) fuel in 2009. Presently, INP intends to also use IRT-4M 8-tube FA, and a safety analysis for these 'mixed' (8-tube and 6-tube FA) cores is required by the regulatory authorities. This paper presents results of control rod ejection transient analysis for these mixed cores

  15. Control and Interpretation of Finite-Size Effects and Initial Morphology in Directional Solidification of a Rod-Type Eutectic Transparent Metal-Analog

    Science.gov (United States)

    Napolitano, R. E.; Şerefoğlu, Melis

    2012-01-01

    Transparent metal-analog materials offer a great opportunity for in situ investigation of the morphological dynamics that govern the formation of microstructure in metallic alloys. There are, however, several experimental factors that must be controlled or considered for proper and reproducible interpretation. We examine some of these issues here, summarizing our recent findings related to the case of rod-type eutectic solidification, for which we examine the importance of ampoule geometry and initial conditions. Employing directional solidification experiments with thin-slab specimens, we look specifically at finite-size effects on growth morphology and the influence of initial structure on the mechanisms of eutectic onset.

  16. A Destructive Validation of NDE Responses of Service-Induced PWSCC Found in North Anna 2 Control Rod Drive Nozzle 31

    Energy Technology Data Exchange (ETDEWEB)

    Cumblidge, Stephen E.; Doctor, Steven R.; Schuster, George J.; Harris, Robert V.; Crawford, Susan L.; Seffens, Rob J.; Toloczko, Mychailo B.; Bruemmer, Stephen M.; Moyer, C.

    2009-07-01

    Studies conducted at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington focused on assessing the effectiveness of nondestructive examination (NDE) techniques for inspecting control rod drive mechanism (CRDM) nozzles and J-groove weldments. The primary objective of this work is to provide information to the United States Nuclear Regulatory Commission (NRC) on the effectiveness of NDE methods as related to the in-service inspection of CRDM nozzles and J-groove weldments, and to enhance the knowledge base of primary water stress corrosion cracking (PWSCC) through destructive characterization of the CRDM assemblies.

  17. A Negative Regulatory Element Controls mRNA Abundance of the Leishmania mexicana Paraflagellar Rod Gene PFR2†

    OpenAIRE

    2003-01-01

    The Leishmania mexicana PFR2 locus encodes a component of the paraflagellar rod (PFR), a flagellar structure found only in the insect stage of the life cycle. PFR2 mRNA levels are 10-fold lower in the mammalian stage than in the insect stage. Nuclear run-on experiments indicate that the change in PFR2 mRNA abundance is achieved posttranscriptionally. Deletion and block substitution analysis of the entire 1,400-nucleotide 3′ untranslated region (UTR) of PFR2C led to the identification of a reg...

  18. Control of the Maya AUV in the vertical and horizontal planes: Theory and practical results

    Digital Repository Service at National Institute of Oceanography (India)

    Maurya, P.; Desa, E.; Pascoal, A.; Barros, E.; Navelkar, G.S.; Madhan, R.; Mascarenhas, A.A.M.Q.; Prabhudesai, S.; Afzulpurkar, S.; Gouveia, Ashwin; Naroji, S.; Sebastiao, l.

    state-feedback control law (linear quadratic regulator (LQR) structure) where K is a matrix of feedback gains. The Control System Tool box of Matlab™ was used to compute the optimal gain matrix K. Weight matrix: Q = CTC C = [Wq... conference, Ancona, Italy, 2004. [The data used is from revised version of this paper which is to be published ] B. J Lurie, P.J. Enright, Classical Feedback control with Matlab, Marcel Dekker Inc. New York, 2000. Isaac Kaminer, A. Pasocal, Pramod...

  19. CARR控制棒驱动机构堆外调试试验%Out of Pile Commissioning Test of CARR Control Rod Driving Mechanism

    Institute of Scientific and Technical Information of China (English)

    张应超; 高永光; 张明葵; 康亚伦; 季松涛; 黄道立; 马明武

    2013-01-01

    中国先进研究堆(CARR)控制棒由磁力驱动。为进行CARR控制棒堆外调试试验,建造了模拟CARR热工水力条件的试验回路。试验中发现驱动机构存在一些问题,提出改进建议,得到CARR工程部和设计者认可。对驱动机构进行了一些改进,试验测量了线圈温度、落棒时间、极限流量和极限载荷等重要参数,试验证明经改进的控制棒驱动机构达到了设计要求。%China Advanced Research Reactor (CARR) control rods are driven by the magnetic force produced by electrical coils . An out of pile testing loop was specially constructed to simulate CARR thermal-hydraulic conditions for the test .Some problems were found during the experiment ,and several proposals of improvement were offered for the modification of the driving mechanism and accepted by the CARR engineering department and the designer .The modification to the driving mechanism was implemented ,and the important parameters were measured ,such as the balance temperature of the coils ,the rod drop time ,the coolant flow limit ,and the load limit . T he results show that the modified control rod driving mechanism meets design requirements .

  20. A Study on the Electromagnet Thrust force Characteristics of Newly Proposed Hybrid Bottom-mounted Control Rod Drive Mechanism for Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Hyung; Cho, Yeong Garp; Choi, Myoung Hwan; Yu, Je Yong; Kim, Ji Ho; Kim, Jong In [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2011-05-15

    The control rod drive mechanism (CRDM) is the part of reactor regulating system (RRS), which is located in the reactor pool top (Top-mounted) or the room below the reactor pool (Bottom-mounted). The function of the CRDM is to insert, withdraw or maintain neutron absorbing material at any required position within the reactor core, in order to the reactivity control of the core. There are so many kinds of CRDM, such as magneticjack type, hydraulic type, rack and pinion type, chain type and linear or rotary step motor and so on. As a part of a new project, we have investigated the movable coil electromagnetic drive mechanism (MCEDM) which is new scheme for the reactor control rod adopted by China Advanced Research Reactor (CARR) as shown in Fig.1. To improve a better function of the electromagnetic and magnetic characteristics, new model CRDM, which is named a hybrid bottommounted CRDM (HBCRDM), is proposed. Especially in order to achieve improved thrust force, numerical magnetic field calculations between MCEDM and HBCRDM have been carried out and the HBCRDM FEM results have been compared with the MCEDM FEM results, and FEM results are summarized in the following sections

  1. Effect of control activity on blade fatigue damage rate for a small horizontal axis wind turbine

    Energy Technology Data Exchange (ETDEWEB)

    Riddle, A.F.; Freris, L.L.; Graham, J.M.R. [Imperial College, London (United Kingdom)

    1996-09-01

    An experiment into the effect of control activity on blade fatigue damage rate for a 5 kW, two bladed, teetered HAWT has been performed. It has been shown that control activity influences the distribution of strain in the blade but that in a high rotor speed, high cycle fatigue regime this has little influence on damage rate. The experiment was conducted on a small test turbine by implementing variable speed stall, pitch and yaw control strategies and measuring blade flapwise strain response at root and midspan locations. A full description of the investigation is provided. (au)

  2. Controlled cooling process optimization of H08 A welding wire rod%H08 A焊接用盘条控冷工艺优化

    Institute of Scientific and Technical Information of China (English)

    李荣华; 李义长; 樊毅; 赵如龙; 王洪利

    2014-01-01

    Factors of over strength , unstable mechanical properties and unusual microstructure of H 08 A welding wire rod during industrial production were studied .Controlled cooling technology after rolling was optimized .The results show that , as the spinning temperature controlled at (920 ±10) ℃and wind-cooled roller speed at 0.30 m/s, the H08A wire rod is provided with stable mechanical properties and optimal microstructure .%对H08 A焊接用盘条批量试制中出现的强度偏高、性能不稳定及组织异常进行了分析,优化了轧后控冷工艺。结果表明,采用吐丝温度(920±10)℃,风冷辊道速度0.30 m/s的控冷工艺,H08A盘条性能稳定、组织良好。

  3. Telescopic drilling rod

    Energy Technology Data Exchange (ETDEWEB)

    Kagan, I.L.; Berezov, S.I.; Gavrilov, G.A.; Goykhman, Ya.A.; Makushkin, D.O.; Rachev, M.P.; Voynich, L.K.

    1981-09-07

    The telescopic drilling rod includes an inner section of the rod, in whose center cable has been passed and is attached a bearing assembly connecting it to the winch, outer section of rod along which there is pipeline connecting the working cavity formed by the inner section of rod and the housing, installed on the lower end of the outer section of rod, with cavity formed by framework of the guide swivel and end piece and connected to the hydraulic system of the machine by pipeline, as well as clamping elements. In order to drill wells to a depth greater than the length of the outer sectrion of the rod, the latter jointly with the inner section of rod is lowered into the extreme lower position until swivel rests on the feed mechanism. With further slipping of cable and the absence of pressure in the hydraulic system, clamping elements do not have an effect on the inner section of rod. It has the opportunity to freely move along the outer section of rod downwards to the face. When pressure is supplied on pipeline into cavity and further through pipeline into working cavity, the inner section of rod is clamped with feed of the outer section in the process of drilling, both sections move jointly. Because of the link between working cavity of sleeve installed on the lower end of the outer section of rod, and the hydraulic system of the machine through the swivel cavity, it is possible to fix the drilling rod in any mutual axial position of the section.

  4. Controlled synthesis of novel rod-like Cu1.81S nanostructures and field emission properties

    Science.gov (United States)

    Song, Changqing; Yu, Ke; Li, Shouchuan; Yin, Haihong; zhang, Ning; Zhao, Bin; Zhu, Ziqiang

    2014-10-01

    Three flower-like and one rod-shape cubic Cu2S nanostructures were successfully synthesized from a facile hydrothermal method employing CuCl2·2H2O and thiourea as Cu and S source with different volume ratio of ethanol and distilled water, respectively. Hexadecyl trimethyl ammonium Bromide (CTAB) plays an important role in forming the nanorod. After thermal annealing treatment, tetragonal Cu1.81S nanoflower and nanorod were obtained for the first time. Field emission (FE) properties of these nanostructures were investigated for the first time. The results indicated that the tetragonal Cu1.81S nanorods had excellent field emission performance with turn-on field of ∼2.2 V μm-1, threshold field of ∼5.1 V μm-1 and enhancement factor of 1532. It showed that the tetragonal Cu1.81S nanostructures were competitive material in field emission applications.

  5. Vertical and Horizontal Forces: A Framework for Understanding Airpower Command and Control

    Science.gov (United States)

    2014-05-22

    Gharajedaghi, Systems Thinking: Managing Chaos and Complexity: A Platform for Designing Business Architecture , 2nd ed. (New York, NY: Elsevier, 2006), 71...Foreign Relations Since 1776 (Oxford: Oxford University Press, 2008), 949-950. 51Mary Jo Hatch, Organization Theory: Modern, Symbolic, and Postmodern ...Complexity: A Platform for Designing Business Architecture . 2nd ed. New York, NY: Elsevier, 2006. Gerber, David K. “Adaptive Command and Control of

  6. Effect of rod gap spacing on a suction panel for laminar flow and noise control in supersonic wind tunnels. M.S. Thesis - Old Dominion Univ.

    Science.gov (United States)

    Harvey, W. D.

    1975-01-01

    Results are presented of a coordinated experimental and theoretical study of a sound shield concept which aims to provide a means of noise reduction in the test section of supersonic wind tunnels at high Reynolds numbers. The model used consists of a planar array of circular rods aligned with the flow, with adjustable gaps between them for boundary layer removal by suction, i.e., laminar flow control. One of the basic requirements of the present sound shield concept is to achieve sonic cross flow through the gaps in order to prevent lee-side flow disturbances from penetrating back into the shielded region. Tests were conducted at Mach 6 over a local unit Reynolds number range from about 1.2 x 10 to the 6th power to 13.5 x 10 to the 6th power per foot. Measurements of heat transfer, static pressure, and sound levels were made to establish the transition characteristics of the boundary layer on the rod array and the sound shielding effectiveness.

  7. 高碳82B线材控轧控冷工艺优化实践%Optimization Practice on Controlled Rolling and Controlled Cooling Process of High Carbon 82B Wire Rod

    Institute of Scientific and Technical Information of China (English)

    李长胜; 马志军; 王进; 张先轶

    2014-01-01

    Controlled rolling and controlled cooling process is explored for 82B wire rod. Through changing the finishing temperature, laying temperature and stelmor roller speed process parameter, the microstructure and mechanical property of wire rod has basically reached the expected result, sorbitizing rate reached 85%above and the monthly output stabilized at above 5 000 t.%对82B线材控轧控冷工艺进行了优化,通过改变终轧温度、吐丝温度和斯太尔摩辊道速度及冷却工艺参数,盘条的组织和力学性能基本达到了使用要求,索氏体化率达到85%以上,月产量稳定在5000 t以上。

  8. Experiments on the Performance of Small Horizontal Axis Wind Turbine with Passive Pitch Control by Disk Pulley

    Directory of Open Access Journals (Sweden)

    Yu-Jen Chen

    2016-05-01

    Full Text Available The present work is to design a passive pitch-control mechanism for small horizontal axis wind turbine (HAWT to generate stable power at high wind speeds. The mechanism uses a disk pulley as an actuator to passively adjust the pitch angle of blades by centrifugal force. For this design, aerodynamic braking is caused by the adjustment of pitch angles at high wind speeds. As a marked advantage, this does not require mechanical brakes that would incur electrical burn-out and structural failure under high speed rotation. This can ensure the survival of blades and generator in sever operation environments. In this paper, the analysis uses blade element momentum theory (BEMT to develop graphical user interface software to facilitate the performance assessment of the small-scale HAWT using passive pitch control (PPC. For verification, the HAWT system was tested in a full-scale wind tunnel for its aerodynamic performance. At low wind speeds, this system performed the same as usual, yet at high wind speeds, the equipped PPC system can effectively reduce the rotational speed to generate stable power.

  9. Shape control synthesis of spheroid and rod-like silver nanostructures in organic-inorganic sol-gel composite

    Science.gov (United States)

    Saraidarov, T.; Levchenko, V.; Popov, I.; Reisfeld, R.

    2009-07-01

    The synthesis of a variety of spheroid and rod-like silver nanoparticles in hybrid organic-inorganic sol-gel composite films was examined. The sol-gel matrix used in this work involves urethane terminated silica network which acts as a stabilizing and coupling agent and can complex with silver atoms through its secondary amine functionality and form stable colloid dispersions. The parameters determining the particles size and shape are the starting concentrations of silver ions, the coordination and reduction abilities of the solvent and the reaction kinetics and temperature. In this work the reduction process of silver ion was performed by DMF in sol-gel polyurethane precursor solution at two reaction temperatures: (a) 40 ∘C and (b) reflux at boiling temperature. The effects of concentration and temperature of solution on the morphology and uniformity of silver nanorods were investigated by UV-VIS spectroscopy, SEM and TEM. Spheroid nanoparticles size was as 10-12 nm. Electron diffraction shows that all nanoparticles have a silver face-centered cubic crystal lattice. The silver nanoparticles obtained in composite films exhibit a strong characteristic extinction peak, due to surface plasmon resonance occurring nearly 420-440 nm.

  10. Response Surface Methodology Control Rod Position Optimization of a Pressurized Water Reactor Core Considering Both High Safety and Low Energy Dissipation

    Directory of Open Access Journals (Sweden)

    Yi-Ning Zhang

    2017-02-01

    Full Text Available Response Surface Methodology (RSM is introduced to optimize the control rod positions in a pressurized water reactor (PWR core. The widely used 3D-IAEA benchmark problem is selected as the typical PWR core and the neutron flux field is solved. Besides, some additional thermal parameters are assumed to obtain the temperature distribution. Then the total and local entropy production is calculated to evaluate the energy dissipation. Using RSM, three directions of optimization are taken, which aim to determine the minimum of power peak factor Pmax, peak temperature Tmax and total entropy production Stot. These parameters reflect the safety and energy dissipation in the core. Finally, an optimization scheme was obtained, which reduced Pmax, Tmax and Stot by 23%, 8.7% and 16%, respectively. The optimization results are satisfactory.

  11. Effects of Geometry of Reactor Pressure Vessel Upper Head Control Rod Drive Mechanism Penetration Nozzles on J-Groove Weld Residual Stress

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ju Hee; Kim, Yun Jae; Bae, Hong Yeol [Korea University, Seoul (Korea, Republic of); and others

    2011-10-15

    In pressurized water reactors (PWRs), the reactor pressure vessel (RPV) upper head contains numerous control rod drive mechanism (CRDM) nozzles. In the last 10 years, the incidences of cracking in alloy 600 CRDM nozzles and their associated welds has increased significantly. Several axial and circumferential cracks have been found in CRDM nozzles in European PWRs and U.S. nuclear power plants. These cracks are caused by primary water stress corrosion cracking (PWSCC) and have been shown to be driven by welding residual stresses and operational stresses in the weld region. Therefore, detailed finite-element (FE) simulations for the Korea Nuclear Reactor Pressure Vessel have been conducted in order to predict the magnitudes of the weld residual stresses in the tube materials. In particular, the weld residual stress results are compared in terms for nozzle location, geometry factor ro/t, geometry of fillet, and adjacent nozzle.

  12. Fuel cell integral bundle assembly including ceramic open end seal and vertical and horizontal thermal expansion control

    Science.gov (United States)

    Zafred, Paolo R [Murrysville, PA; Gillett, James E [Greensburg, PA

    2012-04-24

    A plurality of integral bundle assemblies contain a top portion with an inlet fuel plenum and a bottom portion containing a base support, the base supports a dense, ceramic air exhaust manifold having four supporting legs, the manifold is below and connects to air feed tubes located in a recuperator zone, the air feed tubes passing into the center of inverted, tubular, elongated, hollow electrically connected solid oxide fuel cells having an open end above a combustion zone into which the air feed tubes pass and a closed end near the inlet fuel plenum, where the open end of the fuel cells rest upon and within a separate combination ceramic seal and bundle support contained in a ceramic support casting, where at least one flexible cushion ceramic band seal located between the recuperator and fuel cells protects and controls horizontal thermal expansion, and where the fuel cells operate in the fuel cell mode and where the base support and bottom ceramic air exhaust manifolds carry from 85% to all of the weight of the generator.

  13. 基于Pro/E简析单杆操纵变速箱换挡原理%Analysis of A Single Control Rod Transmission Shift Based on the Principle of Pro/E

    Institute of Scientific and Technical Information of China (English)

    蔡庆

    2014-01-01

    通过Pro/E强大的运动仿真功能模块来简析单杆操纵变速箱的换挡原理,指出变速箱操纵机构依据操纵杆的数量基本划分为两种,一种是单杆操纵,一种是多杆操纵。单杆操纵具有整套机构中零件数量少,变速箱轻量化,制造成本低的多种优势,目前被广泛应用于轻型变速箱操纵机构中。%Through the motion simulation of Pro/E powerful function modules, the author analyzes a single control rod trans-mission shift principle, points out that the transmission control mechanism, basis on the the number, divide 2 kinds of control rod, one is a single control rod; the other is multi lever control. A single control rod has so many advantages, such as a number of parts in the whole mechanism small, lightweight transmission, low manufacturing cost and so on, which is widely used in light transmission operating mechanism.

  14. Direct costs associated with the management of progressive early onset scoliosis: estimations based on gold standard technique or with magnetically controlled growing rods.

    Science.gov (United States)

    Charroin, C; Abelin-Genevois, K; Cunin, V; Berthiller, J; Constant, H; Kohler, R; Aulagner, G; Serrier, H; Armoiry, X

    2014-09-01

    The main disadvantage of the surgical management of early onset scoliosis (EOS) using conventional growing rods is the need for iterative surgical procedures during childhood. The emergence of an innovative device using distraction-based magnetically controlled growing rods (MCGR) provides the opportunity to avoid such surgeries and therefore to improve the patient's quality of life. Despite the high cost of MCGR and considering its potential impact in reducing hospital stays, the use of MCGR could reduce medical resource consumption in a long-term view in comparison to traditional growing rod (TGR). A cost-simulation model was constructed to assess the incremental cost between the two strategies. The cost for each strategy was estimated based on probability of medical resource consumption determined from literature search as well as data from EOS patients treated in our centre. Some medical expenses were also estimated from expert interviews. The time horizon chosen was 4 years as from first surgical implantation. Costs were calculated in the perspective of the French sickness fund (using rates from year 2013) and were discounted by an annual rate of 4%. Sensitivity analyses were conducted to test model strength to various parameters. With a time horizon of 4 years, the estimated direct costs of TGR and MCGR strategies were 49,067 € and 42,752 €, respectively leading to an incremental costs of 6135 € in favour of MCGR strategy. In the first case, costs were mainly represented by hospital stays expenses (83.9%) whereas in the other the cost of MCGR contributed to 59.5% of the total amount. In the univariate sensitivity analysis, the tariffs of hospital stays, the tariffs of the MCG, and the frequency of distraction surgeries were the parameters with the most important impact on incremental cost. MCGR is a recent and promising innovation in the management of severe EOS. Besides improving the quality of life, its use in the treatment of severe EOS is likely to

  15. Large-scale horizontally aligned ZnO microrod arrays with controlled orientation, periodic distribution as building blocks for chip-in piezo-phototronic LEDs.

    Science.gov (United States)

    Guo, Zhen; Li, Haiwen; Zhou, Lianqun; Zhao, Dongxu; Wu, Yihui; Zhang, Zhiqiang; Zhang, Wei; Li, Chuanyu; Yao, Jia

    2015-01-27

    A novel method of fabricating large-scale horizontally aligned ZnO microrod arrays with controlled orientation and periodic distribution via combing technology is introduced. Horizontally aligned ZnO microrod arrays with uniform orientation and periodic distribution can be realized based on the conventional bottom-up method prepared vertically aligned ZnO microrod matrix via the combing method. When the combing parameters are changed, the orientation of horizontally aligned ZnO microrod arrays can be adjusted (θ = 90° or 45°) in a plane and a misalignment angle of the microrods (0.3° to 2.3°) with low-growth density can be obtained. To explore the potential applications based on the vertically and horizontally aligned ZnO microrods on p-GaN layer, piezo-phototronic devices such as heterojunction LEDs are built. Electroluminescence (EL) emission patterns can be adjusted for the vertically and horizontally aligned ZnO microrods/p-GaN heterojunction LEDs by applying forward bias. Moreover, the emission color from UV-blue to yellow-green can be tuned by investigating the piezoelectric properties of the materials. The EL emission mechanisms of the LEDs are discussed in terms of band diagrams of the heterojunctions and carrier recombination processes.

  16. 基于PLC的模糊PID控制在线材水冷中的实现%Implementation of Fuzzy PID Control in Wire Rod Water-Cooling Based on Programmable Logical Controller

    Institute of Scientific and Technical Information of China (English)

    戚志将

    2014-01-01

    Introduction was made to the online control functions of wire rod water-cooling. This paper analyzed the requirements of the hardware and software in the process of wire rod water-cooling and its implementing scheme and gave the system structure schematic of the pulling-on water-cooling technique control. Via constructing the automatic control system based on PLC S7-300, the system realized fuzzy PID control scheme. The simulation results show that adopting fuzzy PID control reduces overshoot with better anti-interference capacity. The concrete scheme of programmable logical controller is used to realize the control strategy to optimize the process of water-cooling.%介绍了线材水冷在线控制的功能,分析了线材水冷却过程中硬件和软件的要求及实现方案,给出了穿水冷却工艺控制系统的结构示意图,并通过构建基于PLC S7-300的自动控制系统实现了模糊PID控制策略,仿真结果表明:采用模糊PID控制减小了超调,有较好的抗干扰能力;利用PLC具体化方案能方便地实现控制策略,优化水冷过程。

  17. Validation of the ultrasonic and Eddy current techniques to inspect the accommodation of the elements of (CRDH) control rod drive; Validacion de las tecnicas de ultrasonidos y corrientes inducidas para inspeccionar los alojamientos

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, A.; Gomez, P.; Sanchez, J.; Resa, P.

    2013-07-01

    Tecnatom development in the past with ultrasonic inspection procedures to examine vessels BWR of several Central nuclear (CRDH) control rod drive elements, accommodations. In each case, inspection techniques have relied on both the volume of required test postulated defects. Also, taking into account the possible access to the component, developed mechanical equipments of different characteristics.

  18. 几种结构的三段离散杆战斗部数值模拟∗%Numerical Simulation of Three-beam Rod Controlled Motion Warhead with Different Structure

    Institute of Scientific and Technical Information of China (English)

    阮喜军; 梁争峰; 程淑杰

    2015-01-01

    Three-beam rod controlled_motion warhead was researched in this paper, which has different structure of discrete rods stagger arrangement or trans arrangement. The whole dispersal process of these rods simulated by ANSYS/LS-DYNA. The result indicate that the gap between the rods in each layers with stagger arrangement structure can be mutually complementary. At the same time the phenomena that the discrete rods spin in the opposite direction with trans arrangement structure proved. This way can shorten the time forming killing hoop. So such technology can help to control the formation time of each rod ring to achieve different spatial distribution of multiple killing hoop.%针对三段可控离散杆战斗部,探索性提出并分析了错位与顺反等不同排列结构,利用ANSYS/LS-D-YNA软件对其进行了数值仿真模拟,动态再现了离散杆从起爆到形成杀伤环的全过程。研究结果表明错位排列有助于段与段杆条间隙的互相补充,使得杆条整体分布均匀,有效提高毁伤概率;反式排列使得段与段杆条的自旋方向相反,杆条形成杀伤环时间缩短,此种排列技术有助于控制每段杆条群杀伤环的形成时间,实现远近距离不同的多重杀伤环空间分布。

  19. Control of the saturation temperature in magnetic heating by using polyethylene-glycol-coated rod-shaped nickel-ferrite (NiFe2O4) nanoparticles

    Science.gov (United States)

    Iqbal, Yousaf; Bae, Hongsub; Rhee, Ilsu; Hong, Sungwook

    2016-02-01

    Polyethylene-glycol (PEG)-coated nickel-ferrite nanoparticles were prepared for magnetic hyperthermia applications by using the co-precipitation method. The PEG coating occurred during the synthesis of the nanoparticles. The coated nanoparticles were rod-shaped with an average length of 16 nm and an average diameter of 4.5 nm, as observed using transmission electron microscopy. The PEG coating on the surfaces of the nanoparticles was confirmed from the Fourier-transform infrared spectra. The nanoparticles exhibited superparamagnetic characteristics with negligible coercive force. Further, magnetic heating effects were observed in aqueous solutions of the coated nanoparticles. The saturation temperature could be controlled at 42 ℃ by changing the concentration of the nanoparticles in the aqueous solution. Alternately, the saturation temperature could be controlled for a given concentration of nanoparticles by changing the intensity of the magnetic field. The Curie temperature of the nanoparticles was estimated to be 495 ℃. These results for the PEG-coated nickel-ferrite nanoparticles showed the possibility of utilizing them for controlled magnetic hyperthermia at 42 ℃.

  20. Ecoepidemiologia e Controle da Leishmaniose Visceral no município de Belo Horizonte (Minas Gerais, Brasil)

    OpenAIRE

    Fabiana Oliveira Lara e Silva

    2015-01-01

    Este estudo foi realizado em Belo Horizonte (Minas Gerais, Brasil), área endêmica para Leishmaniose visceral (LV), onde a doença vem se expandindo rapidamente, com 1.612 casos registrados nos últimos 10 anos. Nossa pesquisa avaliou o perfil epidemiológico em duas Áreas de abrangência (AA) dos Centros de Saúde (CS) Miramar e Salgado Filho do município de Belo Horizonte, com transmissão recente de LV, buscando compreender a tríade envolvida na transmissão: parasito-vetor-reservatório. ...

  1. Effect of light on the transfer of sugars from sugar nucleotides to rod outer segment membranes of control and dystrophic rats.

    Science.gov (United States)

    Mok, C; Matuk, Y

    1987-10-01

    The transfer of N-acetyl-D-glucosamine (GlcNAc), D-mannose (Man), D-galactose (Gal) and L-fucose (Fuc) from their nucleotide complexes to isolated rod outer segment (ROS) membranes obtained from dark-adapted 21 +/- 2 days old dystrophic (RCS) and control (RCS-rdy+) rat retinas, was studied under light or dark conditions of incubation. It was found that all of these sugars were transferred to ROS membranes in the dark. Under these conditions there was significantly less (p less than 0.001) Gal transferred to dystrophic than to control membranes. Exposure to light affected the transfer of Gal and Fuc only. Thus, the transfer of Gal and Fuc to control ROS membranes was increased by about 50% compared to the level observed under dark conditions of incubation. On the other hand, exposure to light had no effect on the transfer of Gal to dystrophic ROS membranes but it enhanced the transfer of Fuc to these membranes by about 250% above the level observed in the dark. Under light there were highly significant (p less than 0.001) differences between control and dystrophic membranes in the transfer of Gal and Fuc. The transfer of Fuc to dystrophic ROS membranes was proportional to the concentration of GDP-Fuc but the acceptors on control membranes were saturated at low concentrations of substrate. However, the transfer of Gal from UDP-Gal to both types of membranes was proportional to the concentrations of substrate and ROS membrane protein and to the period of incubation. The transfer of Gal and Fuc to both types of membranes was significantly reduced after denaturation of ROS membrane proteins.(ABSTRACT TRUNCATED AT 250 WORDS)

  2. Effects of Inboard Horizontal Field of View Display Limitations on Pilot Path Control During Total In-Flight Simulator (TIFS) Flight Test

    Science.gov (United States)

    Kramer, Lynda J.; Parrish, Russell V.; Williams, Steven P.; Lavell, Jeffrey S.

    1999-01-01

    A flight test was conducted aboard Calspan's Total In-Flight Simulator (TIFS) aircraft by researchers within the External Visibility System (XVS) element of the High-Speed Research program. The purpose was to investigate the effects of inboard horizontal field of view (FOV) display limitations on pilot path control and to learn about the TIFS capabilities and limitations for possible use in future XVS flight tests. The TIFS cockpit windows were masked to represent the front XVS display area and the High-Speed Civil Transport side windows, as viewed by the pilot. Masking limited the forward FOV to 40 deg. horizontal and 50 deg. vertical for the basic flight condition, With an increase of 10 deg. horizontal in the inboard direction for the increased FOV flight condition. Two right-hand approach tasks (base-downwind-final) with a left crosswind on final were performed by three pilots using visual flight rules at Niagara Falls Airport. Each of the two tasks had three replicates for both horizontal FOV conditions, resulting in twelve approaches per test subject. Limited objective data showed that an increase of inboard FOV had no effect (deficiences in objective data measurement capabilities were noted). However, subjective results showed that a 50 deg. FOV was preferred over the 40 deg. FOV.

  3. Double-labeling techniques demonstrate that rod bipolar cells are under GABAergic control in the inner plexiform layer of the rat retina.

    Science.gov (United States)

    Kim, I B; Lee, M Y; Oh, S; Kim, K Y; Chun, M

    1998-04-01

    The synaptic connectivity between rod bipolar cells and GABAergic neurons in the inner plexiform layer (IPL) of the rat retina was studied using two immunocytochemical markers. Rod bipolar cells were stained with an antibody specific for protein kinase C (PKC, alpha isoenzyme), and GABAergic neurons were stained with an antiserum specific for glutamic-acid decarboxylase (GAD). Some amacrine cells were also labeled with the anti-PKC antiserum. All PKC-labeled amacrine cells examined showed GABA immunoreactivity, indicating that PKC-labeled amacrine cells constitute a subpopulation of GABAergic amacrine cells in the rat retina. A total of 150 ribbon synapses established by rod bipolar cells were observed in the IPL. One member of the postsynaptic dyads was always an unlabeled AII amacrine cell process, and the other belonged to an amacrine-cell process showing GAD immunoreactivity. The majority (n=92) (61.3%) of these processes made reciprocal synapses back to the axon terminals of rod bipolar cells. In addition, 78 conventional synapses onto rod bipolar axons were observed, and among them 52 (66.7%) were GAD-immunoreactive. Thus GABA provides the major inhibitory input to rod bipolar cells.

  4. Establishing baseline rod electroretinogram values in achromatopsia and cone dystrophy.

    Science.gov (United States)

    Wang, Isaac; Khan, Naheed W; Branham, Kari; Wissinger, B; Kohl, Susanne; Heckenlively, J R

    2012-12-01

    To establish the normal range of values for rod-isolated b-wave amplitudes in achromatopsia and cone dystrophies. We reviewed charts of 112 patients with various types of cone dystrophy, and compared their standardized electroretinographic rod b-wave amplitudes with age-matched normal controls. Twenty-six patients had known mutations in achromatopsia and cone dystrophy genes, while 53 were characterized by their inheritance pattern since they had yet to have their gene identified. Visual acuity information and scotomata were documented. We found that patients with achromatopsia and cone dystrophy had rod b-wave amplitudes that were significantly lower than age-matched controls, but found no evidence of rod amplitude progression nor loss of peripheral visual fields in the study group. We found that cone dystrophy patients of all types had depressed rod-isolated ERGs across the board. If typical diagnostic criteria are used, these patients might be considered to have "abnormal" rod-isolated electroretinographic values, and might be called "cone-rod dystrophy", even though the waveforms are stable for years. Patients with cone-rod dysfunction patterns on ERG can be better understood by also performing kinetic (Goldmann) visual fields, which will help to distinguish cone dystrophies from progressive cone-rod dystrophies by central scotomata size and progression over time in many forms of cone-rod dystrophy.

  5. Localization of the Drosophila checkpoint control protein Bub3 to the kinetochore requires Bub1 but not Zw10 or Rod.

    Science.gov (United States)

    Basu, J; Logarinho, E; Herrmann, S; Bousbaa, H; Li, Z; Chan, G K; Yen, T J; Sunkel, C E; Goldberg, M L

    1998-12-01

    We report here the isolation and molecular characterization of the Drosophila homolog of the mitotic checkpoint control protein Bub3. The Drosophila Bub3 protein is associated with the centromere/kinetochore of chromosomes in larval neuroblasts whose spindle assembly checkpoints have been activated by incubation with the microtubule-depolymerizing agent colchicine. Drosophila Bub3 is also found at the kinetochore regions in mitotic larval neuroblasts and in meiotic primary and secondary spermatocytes, with the strong signal seen during prophase and prometaphase becoming increasingly weaker after the chromosomes have aligned at the metaphase plate. We further show that the localization of Bub3 to the kinetochore is disrupted by mutations in the gene encoding the Drosophila homolog of the spindle assembly checkpoint protein Bub1. Combined with recent findings showing that the kinetochore localization of Bub1 conversely depends upon Bub3, these results support the hypothesis that the spindle assembly checkpoint proteins exist as a multiprotein complex recruited as a unit to the kinetochore. In contrast, we demonstrate that the kinetochore constituents Zw10 and Rod are not needed for the binding of Bub3 to the kinetochore. This suggests that the kinetochore is assembled in at least two relatively independent pathways.

  6. Control over phase behavior and solution structure of hairy-rod polyfluorene by means of side-chain length and branching

    Science.gov (United States)

    Knaapila, M.; Stepanyan, R.; Torkkeli, M.; Garamus, V. M.; Galbrecht, F.; Nehls, B. S.; Preis, E.; Scherf, U.; Monkman, A. P.

    2008-05-01

    We present guidelines on how the solution structure of π -conjugated hairy-rod polyfluorenes is controlled by the side-chain length and branching. First, the semiquantitative mean-field theory is formulated to predict the phase behavior of the system as a function of side-chain beads (N) . The phase transition at N=N∗ separates a lyotropic phase with solvent coexistence (NN∗) . The membrane phase transforms into the isotropic phase of dissolved rodlike polymers at the temperature Tmem∗(N) , which decreases both with N and with the degree of side-chain branching. This picture is complemented by polymer demixing with the transition temperature TIN∗(N) , which decreases with N . For NN∗ , stable membranes are predicted for TIN∗N∗ . Tmem∗(N) decreases from 340 K to 280 K for N≥8 . For copolymers, the membrane phase is found when the fraction of F8 units is at least 90%, Tmem∗ decreasing with this fraction. The membrane phase contains three material types: loose sheets of two polymer layers, a better packed β phase, and dissolved polymer. For N≥7 and T

  7. Study on Fracture Behavior of 2D-C/C Composite for Application to Control Rod of Very High Temperature Reactor

    Science.gov (United States)

    Sumita, J.; Fujita, I.; Shibata, T.; Makita, T.; Takagi, T.; Kunimoto, E.; Sawa, K.; Kim, W.; Park, J.

    2011-10-01

    For a control rod element of the Very High Temperature Reactor, a carbon fiber reinforced carbon matrix composite (C/C composite) is one of the major candidate materials for its high strength and thermal stability. In this study, in order to establish the data base of the 2D-C/C composite, the fracture data was obtained by simulating the crack expected to be generated under the VHTR condition and the oxidation effect on the fracture behavior was evaluated. Moreover, the fracture mechanism of the C/C composite was investigated through scanning electron microscope observation. This study showed that the oxidized matrix caused reduction of the fracture toughness and the reduction ratio was dependent on the density of matrix and a number cracks. With increasing the oxidation, the fracture toughness is mainly dependent on the fiber characteristics. Furthermore, the crack grows along the boundary between fiber bundles without breaking the fiber. The cracks which were initiated at the interface between the matrix and the fiber were gathered into the voids in the boundary between fiber bundles, and, then, the cracks grew up in the matrix.

  8. Study on Fracture Behavior of 2D-C/C Composite for Application to Control Rod of Very High Temperature Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sumita, J; Fujita, I; Shibata, T; Sawa, K [Research Group for VHTR Fuel and Material, Division of Fuels and Materials Engineering, Nuclear Science and Engineering Directorate, Japan Atomic Energy Agency, 4002 Oarai-machi, Higashiibaraki-gun, Ibaraki-ken, 311-1393 (Japan); Makita, T [Functional Materials Development Team, Research and Development Div., Tokai Carbon Co., Ltd., 394-1 Subashiri, Oyama-cho, Sunto-gun, Shizuoka-ken, 410-1431 (Japan); Takagi, T [Engineering Group, FC Unit, FC Operation, Ibiden Co., LTd., 300 Aoyagi-cho, Ogaki-shi, Gifu-ken, 503-8503 (Japan); Kunimoto, E [Atomic Energy Section, Production Division, Toyo Tanso Co., Ltd., 2791 Matsuzaki, Takuma-cho, Mitoyo-shi, Kagawa-ken, 769-1102 (Japan); Kim, W; Park, J, E-mail: sumita.junya@jaea.go.jp [Nuclear Materials Research Division, Korea Atomic Energy Research Institute, 1045, Daedeok-daero, Yuseong-gu, Daejeon, 305-353 (Korea, Republic of)

    2011-10-29

    For a control rod element of the Very High Temperature Reactor, a carbon fiber reinforced carbon matrix composite (C/C composite) is one of the major candidate materials for its high strength and thermal stability. In this study, in order to establish the data base of the 2D-C/C composite, the fracture data was obtained by simulating the crack expected to be generated under the VHTR condition and the oxidation effect on the fracture behavior was evaluated. Moreover, the fracture mechanism of the C/C composite was investigated through scanning electron microscope observation. This study showed that the oxidized matrix caused reduction of the fracture toughness and the reduction ratio was dependent on the density of matrix and a number cracks. With increasing the oxidation, the fracture toughness is mainly dependent on the fiber characteristics. Furthermore, the crack grows along the boundary between fiber bundles without breaking the fiber. The cracks which were initiated at the interface between the matrix and the fiber were gathered into the voids in the boundary between fiber bundles, and, then, the cracks grew up in the matrix.

  9. Effects of Repair Weld of Reactor Pressure Vessel Upper Head Control Rod Drive Mechanism Penetration Nozzle on J-Groove Weldment Using Finite Element Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ju Hee; Yoo, Sam Hyeon [Korea Military Academy, Seoul (Korea, Republic of); Kim, Yun Jae [Korea University, Seoul (Korea, Republic of)

    2014-06-15

    In pressurized water reactors, the upper head of the reactor pressure vessel (RPV) contains numerous control rod drive mechanism (CRDM) nozzles. These nozzles are fabricated by welding after being inserted into the RPV head with a room temperature shrink fit. The tensile residual stresses caused by this welding are a major factor in primary water stress corrosion cracking (PWSCC). Over the last 15 years, the incidences of cracking in alloy 600 CRDM nozzles have increased significantly. These cracks are caused by PWSCC and have been shown to be driven by the welding residual stresses and operational stresses in the weld region. Various measures are being sought to overcome these problems. The defects resulting from the welding process are often the cause of PWSCC acceleration. Therefore, any weld defects found in the RPV manufacturing process are immediately repaired by repair welding. Detailed finite element simulations for the Korea Nuclear Reactor Pressure Vessel were conducted in order to predict the magnitudes of the repair weld residual stresses in the tube materials.

  10. Analysis of unprotected transients with control and safety rod drive mechanism expansion feedback in a medium sized oxide fuelled fast breeder reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sathiyasheela, T., E-mail: sheela@igcar.gov.in; Natesan, K.; Srinivasan, G.S.; Devan, K.; Puthiyavinayagam, P.

    2015-09-15

    Highlights: • Possibilities of enhancing safety under ULOF and UTOP accidents. • CSRDM expansion feedbacks under unprotected transients. • CSRDM expansion feedback enhances the safety of fast reactors. • CSRDM expansion feedbacks ensuring enough time for initiating safety actions. - Abstract: Possibilities of enhancing core safety under unprotected loss of flow (ULOF) and unprotected transient over power (UTOP) accidents with control and safety rod drive mechanism (CSRDM) expansion feedbacks are explored in a medium sized oxide fuelled fast breeder reactor. This feedback is expected to take the reactor to a safe shutdown under ULOF and to an another steady state under UTOP where there is no significant fuel melting. Under ULOF, with CSRDM feedback net reactivity was maintained negative throughout the transient (up to 2000 s) and the power dropped to a level of heat removal capacity of decay heat removal system based on natural circulation. Similarly, under UTOP with the above feedback reactor power goes to a lower peak value. The fuel temperature is just touching the melting temperature and the melt fraction does not cross 5%. With CSRDM expansion feedbacks both ULOF and UTOP transients prolong beyond 2000 s. It ensures, availability of time for initiating any safety actions against the transients, and thus it helps to preclude core disruptive accidents (CDA) in a medium sized oxide fuelled reactors.Classification: L. safety and risk analysis.

  11. Controlled synthesis of CeO2 microstructures from 1D rod-like to 3D lotus-like and their morphology-dependent properties

    Science.gov (United States)

    Gong, Jinfeng; Meng, Fanming; Fan, Zhenghua; Li, Huijie

    2016-10-01

    Monodisperse 3D lotus-like CeO2 microstructures have been successfully synthesized via controlling the morphology of CeCO3OH precursors under hydrothermal condition as well as subsequent calcination. The reaction time was systematically investigated. XRD, FT-IR, SEM, TEM, XPS, Raman scattering and Photoluminescence (PL) spectra were employed to characterize the samples. The lotus-like CeO2 hierarchical structures with an average of 4-6 μm are composed of many nanoplates of 100-200 nm in thickness as the petals stacking together to form open flowers and have a fluorite cubic structure. Based on the time-dependent morphology evolution evidences, a nucleation-dissolution-recrystallization mechanism has been proposed to explain the transformation from rod-like structures to lotus-like CeO2 hierarchical structures with the increase of reaction time. It is found that there are Ce3+ ions and oxygen vacancies in surface of samples. The magnetic and photoluminescence measurements indicated that all CeO2 samples exhibit excellent ferromagnetism and optical properties at room temperature, and while increasing the reaction time, the ferromagnetism and optical properties increase more, which can be reasonably explained for the influences of the different morphology of the particles and the concentration of oxygen vacancies and Ce3+ ions. [Figure not available: see fulltext.

  12. Ultrasonic Phased Array Assessment of the Interference Fit and Leak Path of the North Anna Unit 2 Control Rod Drive Mechanism Nozzle 63 with Destructive Validation

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, Susan L.; Cinson, Anthony D.; MacFarlan, Paul J.; Hanson, Brady D.; Mathews, Royce

    2012-08-01

    The objective of this investigation was to evaluate the efficacy of ultrasonic testing (UT) for primary water leak path assessments of reactor pressure vessel (RPV) upper head penetrations. Operating reactors have experienced leakage when stress corrosion cracking of nickel-based alloy penetrations allowed primary water into the annulus of the interference fit between the penetration and the low-alloy steel RPV head. In this investigation, UT leak path data were acquired for an Alloy 600 control rod drive mechanism nozzle penetration, referred to as Nozzle 63, which was removed from the North Anna Unit 2 reactor when the RPV head was replaced in 2002. In-service inspection prior to the head replacement indicated that Nozzle 63 had a probable leakage path through the interference fit region. Nozzle 63 was examined using a phased-array UT probe with a 5.0-MHz, eight-element annular array. Immersion data were acquired from the nozzle inner diameter surface. The UT data were interpreted by comparing to responses measured on a mockup penetration with known features. Following acquisition of the UT data, Nozzle 63 was destructively examined to determine if the features identified in the UT examination, including leakage paths and crystalline boric acid deposits, could be visually confirmed. Additional measurements of boric acid deposit thickness and low-alloy steel wastage were made to assess how these factors affect the UT response. The implications of these findings for interpreting UT leak path data are described.

  13. PWR-UO{sub 2} nuclear fuel criticality study: control rod effects on infinite neutron multiplication factor and spent fuel composition

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, R.V.; Pereira, C., E-mail: claubia@nuclear.ufmg.br; Silva, C.A.M.; Costa, A.L.; Veloso, M.A.F.; Oliveira, A.H. de

    2013-10-15

    Highlights: • A three-dimensional model of a PWR fuel were simulated. • Results using TRITON/T6-DEPL module in SCALE 6.0 and two libraries (238 and 44 groups) were compared. • Variations in the infinite neutron multiplication factor and the nuclides concentrations, both under control rod insertion effects were analysed. • Results show very good agreement with those published by OECD. -- Abstract: Deterministic and stochastic nuclear codes are software packages used to perform reactor physics calculations, especially in PWRs, the most common type of nuclear reactor currently in operation. The NEA Expert Group on Burn-up Credit Criticality Safety has published a Benchmark with results obtained from simulations of PWR-UO{sub 2} nuclear fuel. The same simulations were performed at DEN/UFMG with SCALE 6.0, a modular nuclear system code developed by Oak Ridge National Laboratory using two different neutron energy libraries (238 and 44 groups). The results obtained using a three-dimensional model with the T6-DEPL sequence of the TRITON module in SCALE 6.0 for spent fuel inventory and infinite neutron multiplication factor calculations show very good agreement with those published by the OECD. The main goal of this work is to validate the methodology at DEN/UFMG for future use in simulations related to Angra I, II and III Nuclear Power Plants.

  14. Controllable synthesis and enhanced microwave absorbing properties of Fe3O4/NiFe2O4/Ni heterostructure porous rods

    Science.gov (United States)

    Li, Yana; Wu, Tong; Jin, Keying; Qian, Yao; Qian, Naxin; Jiang, Kedan; Wu, Wenhua; Tong, Guoxiu

    2016-11-01

    We developed a coordinated self-assembly/precipitate transfer/sintering method that allows the controllable synthesis of Fe3O4/NiFe2O4/Ni heterostructure porous rods (HPRs). A series of characterizations confirms that changing [Ni2+] can effectively control the crystal size, internal strain, composition, textural characteristics, and properties of HPRs. Molar percentages of Ni and NiFe2O4 in HPRs increase with [Ni2+] in various Boltzmann function modes. Saturation magnetization Ms and coercivity Hc show U-shaped change trends because of crystal size, composition, and interface magnetic coupling. High magnetic loss is maintained after decorating NiFe2O4 and Ni on the surface of Fe3O4 PRs. Controlling the NiFe2O4 interface layers and Ni content can improve impedance matching and dielectric losses, thereby leading to lighter weight, stronger absorption, and broader absorption band of Fe3O4/NiFe2O4/Ni HPRs than Fe3O4 PRs. An optimum EM wave absorbing property was exhibited by Fe3O4/NiFe2O4/Ni HPRs formed at [Ni2+] = 0.05 M. The maximum reflection loss (RL) reaches -58.4 dB at 13.68 GHz, which corresponds to a 2.1 mm matching thickness. The absorbing bandwidth (RL ≤ -20 dB) reaches 14.4 GHz with the sample thickness at 1.6-2.4 and 2.8-10.0 mm. These excellent properties verify that Fe3O4/NiFe2O4/Ni HPRs are promising candidates for new and effective absorptive materials.

  15. The development of a thermal hydraulic feedback mechanism with a quasi-fixed point iteration scheme for control rod position modeling for the TRIGSIMS-TH application

    Science.gov (United States)

    Karriem, Veronica V.

    Nuclear reactor design incorporates the study and application of nuclear physics, nuclear thermal hydraulic and nuclear safety. Theoretical models and numerical methods implemented in computer programs are utilized to analyze and design nuclear reactors. The focus of this PhD study's is the development of an advanced high-fidelity multi-physics code system to perform reactor core analysis for design and safety evaluations of research TRIGA-type reactors. The fuel management and design code system TRIGSIMS was further developed to fulfill the function of a reactor design and analysis code system for the Pennsylvania State Breazeale Reactor (PSBR). TRIGSIMS, which is currently in use at the PSBR, is a fuel management tool, which incorporates the depletion code ORIGEN-S (part of SCALE system) and the Monte Carlo neutronics solver MCNP. The diffusion theory code ADMARC-H is used within TRIGSIMS to accelerate the MCNP calculations. It manages the data and fuel isotopic content and stores it for future burnup calculations. The contribution of this work is the development of an improved version of TRIGSIMS, named TRIGSIMS-TH. TRIGSIMS-TH incorporates a thermal hydraulic module based on the advanced sub-channel code COBRA-TF (CTF). CTF provides the temperature feedback needed in the multi-physics calculations as well as the thermal hydraulics modeling capability of the reactor core. The temperature feedback model is using the CTF-provided local moderator and fuel temperatures for the cross-section modeling for ADMARC-H and MCNP calculations. To perform efficient critical control rod calculations, a methodology for applying a control rod position was implemented in TRIGSIMS-TH, making this code system a modeling and design tool for future core loadings. The new TRIGSIMS-TH is a computer program that interlinks various other functional reactor analysis tools. It consists of the MCNP5, ADMARC-H, ORIGEN-S, and CTF. CTF was coupled with both MCNP and ADMARC-H to provide the

  16. Analysis of Control Rod Worth Features of MC Simulation in AP1000 Reactor%AP1000核反应堆控制棒价值特性的MC模拟

    Institute of Scientific and Technical Information of China (English)

    谢明亮; 于雷; 陈玉清

    2016-01-01

    针对当前AP000堆芯采用的两类控制棒束,基于MCNP5程序建立堆芯仿真计算模型,分析了含不同硼浓度对堆芯kef与硼微分价值的影响,同时对AP1000棒组价值进行模拟计算,对比分析了黑棒与灰棒插入堆芯对kef的影响。结果表明:基于MC N P5程序建立的模型是正确的,硼微分价值(绝对值)随硼浓度增加呈现下降趋势,其值在-9.16~-13.60范围内变化,符合反应性设计要求,有效增殖系数kef随控制棒插入呈现非线性变化,得到了控制棒的价值变化曲线与拟合关系式,为控制棒在反应堆内紧急控制与功率调节提供参考。%In view of current use of two kinds of control rods in AP1000 reactor,the simulation calculation model was set up based on MCNP5 code,kef and differential value of boron with several different boron concentration were analyzed in the reactor,and simulation of group value rods of AP1000 were calculated at the same time,and the contrast analysis of kef effects was accomplished when black and grey rod insert-ed into the core.Results show that:the model based on MCNP5 code is correct,and the differential value of boron (absolute value)present a downward trend with the increase of boron concentration,and its value changed between 9.16 and 13.60,which is conforms to the requirements of reactive design,and the effec-tive multiplication factor kef present nonlinear variation with rod inserted into the core,and it gets the curves of control rod worth and fitting relation,which provides the reference for emergency control and power regulation with control rod in the reactor.

  17. 基于 S120变频器的炉顶探尺控制方法及应用%Control method and application of furnace top rod system based on S120 converter

    Institute of Scientific and Technical Information of China (English)

    马智慧

    2015-01-01

    Aiming at the process characteristics of furnace top rod system and shortcomings of existing control system and control strategy,a new method of rod control is proposed based on S120 driver. This control system uses the closed loop speed control to put down the rod at a uniform velocity to en-sure its steadiness and smoothness,uses the motor torque current mutation method to accurately cap-ture the furnace charge surface,uses the variable torque control way,which changes the anti-overturn torque and follows the set torque of the furnace charge surface in real time,to implement anti-overturn control and furnace charge surface tracing control,and judges the abnormal conditions,such as col-lapsing,slipping,etc. through the falling speed of the furnace charge surface while tracing it. Through this method we can put down the rod steadily and smoothly,capture the furnace charge surface accu-rately,trace the furnace charge surface in real time,deal with abnormal conditions above,and ensure rapid,steady and safe control of the rod.%针对探尺系统工艺特点以及现有控制系统和控制方法存在的不足,提出一种基于S120变频器的炉顶探尺控制方法。采用速度闭环控制方式实现匀速放尺,保证探尺平稳运行;采用电动机转矩电流突变法精确捕捉料面;采用实时修改防倒垂力矩和跟随料面力矩设定值的变力矩控制方式实现探尺防倒垂控制和跟随料面控制;在探尺跟随料面过程中,通过料面下降速度实时判断高炉是否发生塌料、滑料、坐料等异常状况。该方法实现后,放尺过程快速平稳,捕捉料面准确,跟随料面实时,能应对塌料、滑料、坐料等异常炉况,确保探尺控制的快速性、稳定性和安全性。

  18. Morphoelastic rods. Part I: A single growing elastic rod

    KAUST Repository

    Moulton, D.E.

    2013-02-01

    A theory for the dynamics and statics of growing elastic rods is presented. First, a single growing rod is considered and the formalism of three-dimensional multiplicative decomposition of morphoelasticity is used to describe the bulk growth of Kirchhoff elastic rods. Possible constitutive laws for growth are discussed and analysed. Second, a rod constrained or glued to a rigid substrate is considered, with the mismatch between the attachment site and the growing rod inducing stress. This stress can eventually lead to instability, bifurcation, and buckling. © 2012 Elsevier Ltd. All rights reserved.

  19. 泵车连杆焊接变形的分析与控制%The Analysis and Control of the Welding Deformation in the Rod Links of Concrete Pump Truck

    Institute of Scientific and Technical Information of China (English)

    胡玲玲; 李刚

    2015-01-01

    The structure feature of new mixed rod links of concrete pump truck decides the problem of poor rigidity, which can easily produce the welding deformation. The reasons of the welding deformation and how to control the welding deformation are introduced in the paper. The results indicate the deformation of rod links can be controlled availability by the application of the welding fixture and the reversible deformation.%新型复合品牌泵车连杆的结构特点决定了其刚性差,易发生焊接变形.主要讲述了泵车连杆焊接变形产生的主要原因以及控制焊接变形的主要方法.结果表明,通过焊接工装和反变形法的综合应用,能够有效解决连杆变形的问题.

  20. Learning with Rods: One Account.

    Science.gov (United States)

    Cherry, Donald Esha

    This paper discusses one English as a Second Language (ESL) teacher's attempts to use cuisenaire rods as a language learning tool. Cuisenaire rods (sometimes called algebricks) vary in size from 1 x 1 x 10 centimeter sticks to 1 x 1 x 1 centimeter cubes, with each of the 10 sizes a different color. Although such rods have been used to teach…

  1. High-yield production of hydrophobins RodA and RodB from Aspergillus fumigatus in Pichia pastoris.

    Science.gov (United States)

    Pedersen, Mona Højgaard; Borodina, Irina; Moresco, Jacob Lange; Svendsen, Winnie Edith; Frisvad, Jens Christian; Søndergaard, Ib

    2011-06-01

    Hydrophobins are small fungal proteins with amphipatic properties and the ability to self-assemble on a hydrophobic/hydrophilic interface; thus, many technical applications for hydrophobins have been suggested. The pathogenic fungus Aspergillus fumigatus expresses the hydrophobins RodA and RodB on the surface of its conidia. RodA is known to be of importance to the pathogenesis of the fungus, while the biological role of RodB is currently unknown. Here, we report the successful expression of both hydrophobins in Pichia pastoris and present fed-batch fermentation yields of 200-300 mg/l fermentation broth. Protein bands of expected sizes were detected by SDS-PAGE and western blotting, and the identity was further confirmed by tandem mass spectrometry. Both proteins were purified using his-affinity chromatography, and the high level of purity was verified by silver-stained SDS-PAGE. Recombinant RodA as well as rRodB were able to convert a glass surface from hydrophilic to hydrophobic similar to native RodA, but only rRodB was able to decrease the hydrophobicity of a Teflon-like surface to the same extent as native RodA, while rRodA showed this ability to a lesser extent. Recombinant RodA and native RodA showed a similar ability to emulsify air in water, while recombinant RodB could also emulsify oil in water better than the control protein bovine serum albumin (BSA). This is to our knowledge the first successful expression of hydrophobins from A. fumigatus in a eukaryote host, which makes it possible to further characterize both hydrophobins. Furthermore, the expression strategy and fed-batch production using P. pastoris may be transferred to hydrophobins from other species.

  2. 基于HMCD的仿人机器人单杠运动控制策略%HMCD-based dynamic motion control strategy of humanoid robot on a horizontal bar

    Institute of Scientific and Technical Information of China (English)

    陈雯柏; 高世杰; 吴细宝

    2012-01-01

    为完成仿人机器人单杠运动,分析了欠驱动单杠机器人Acrobot模型,并根据IHOG技术要求、实物机器人本体结构和自由度配置,提出了基于HMCD的控制策略.通过单杠视频捕捉获取人体运动数据,根据仿人机器人模型分析关键特征点、基本动作的运动数据得到的关键帧的关节角数据,经过运动学约束调整,采用插值方法生成能够应用于仿人机器人的运动轨迹.在MF-1型仿人机器人单杠实物平台上进行控制实验的成功,验证了该方法的有效性.%Aiming at the movement implementation of a humanoid robot on a horizontal bar, the control strategy based on HMCD (human motion capture data) is proposed in this paper. The Acrobot model, its physical structure, the degree of freedom and the technical requirements of International Humanoid-robot Olympic Games (IHOG) were analyzed for the robot on a horizontal bar. The key steps of this dynamic motion strategy are motion data capture through the video of humans motion on the horizontal bar, the key feature points'analysis of the humanoid robot model and the joint angles kinematic data match in the basic movements. After making the appropriate adjustments due to the kinematic constraints, an interpolation method was used to generate the motion trajectory of all the joints. The experimental results, based on MF-1 type humanoid robot on the horizontal bar indicate that the proposed method is feasible and effective.

  3. Differential effects of nitric oxide on rod and cone pathways in carp retina

    Institute of Scientific and Technical Information of China (English)

    叶冰; 杜久林; 杨雄里

    1997-01-01

    The effects of nitric oxide (NO) on electroretinograms and light responses of horizontal cells intra-cellularly recorded from isolated, superfused carp retinas were studied. Sodium nitroprusside (SNP), an NO donor, suppressed scotopic b wave, while enhancing photopic b wave, and the effects could be blocked by hemoglobin, an NO chelator. Furthermore, following SNP application, light responses of rod horizontal cells were reduced in size and those of cone horizontal cells were increased. These results suggest that NO suppresses the activity of rod pathway, but enhances that of cone pathway in the outer retina. Moreover, the effects of methylene blue, an inhibitor of soluble guanylate cyclase, on rod and cone horizontal cells were just opposite to those of SNP, implying that the effects of NO may be mediated by cGMP.

  4. Non-linearity Correction of Control Rods Worth for Critical Extrapolation During Start-Up%临界外推中对控制棒价值非线性的修正

    Institute of Scientific and Technical Information of China (English)

    郭海兵; 李润东; 牛伟力

    2013-01-01

    Distant extrapolation is usually used during the start-up of the research reactor, by lifting the control rods step by step to reach the critical state. Due to the non-linearity of the integral worth of the control rods, this process was risky or conservative, especially when the rods were positioned in the non-linear region. A formula could be derived from the point reactor model, in which the reciprocal of the count rate was proportional to Δkeff. Together with the integral worth curve of the control rods, the effect of the non-linearity could be corrected. This method was valideted by critical extrapolation data.%研究堆在物理启动时一般通过棒位外推法得出临界棒位,从而逐步达到临界.但由于控制棒积分价值的非线性,使得这一外推过程不安全或过于偏保守,特别是当临界棒位处于非线性区时.根据点堆模型可导出计数率倒数与Δkeff成正比,若根据积分价值曲线将棒位对应为△keff,则可修正控制棒价值非线性的影响.通过研究堆的临界外推数据验证了这一方法的准确性.

  5. 控制黑棒和灰棒对AP1000反应堆Keff值影响的M-C模拟%M-C Simulation on Keff Value for Control and Gray Rod Effect in AP1000 Reactor

    Institute of Scientific and Technical Information of China (English)

    魏强林; 刘义保; 杨波; 吴和喜

    2013-01-01

    采用正在三门建造的AP1000核电厂堆芯参数,使用MCNP5程序建立AP1000堆芯数学模型.考虑了燃料棒、黑棒与灰棒7种不同排布方式,分3种情况通过调节黑棒和灰棒在堆芯中的深度来研究有效增值因数Keff值的变化情况.模拟结果表明:随着黑棒和灰棒在反应堆堆芯中的插入,Keff值在1.44-1.22之间变化.为了验证其合理性,并用1 000 x10-6(ppm)的硼酸溶液进行了化学补偿模拟试验,计算得Keff值在1.17-1.07之间,基本能够满足降低过剩反应性的要求.%Reactor core parameter of API000 nuclear power plant is used. Taking into account 7 different ways arrangement of the fuel rod, control and gray rod, AP1000 reactor core mathematical model is established by the MCNP5 code. The effective multiplication factor Keff is studied through 3 different ways by adjusting the depth of control and gray rod in the reactor core. Simulated results show that the Keff value changed between 1.44 and 1. 22 with insertion of control and gray rod, In order to verify the reasonableness, the simulation experiment of chemical compensation is done by using 1 000 × 10-6 (ppm) boric acid, and the experiments show the Keff values changed between 1.17 and 1.07 , which could basically meet the requirements of reducing the excess reactivity.

  6. Control rod cluster drop time anomaly Guandong nuclear power station (Daya bay) and Electricite de France nuclear power stations (1450 MWe N4 Series); Anomalie de temps de chute des grappes de controle centrale de guang dong (daya bay) et centrales d`electricite de France (Palier N4-1450 MWE)

    Energy Technology Data Exchange (ETDEWEB)

    Olivera, J.J.; Naury, S.; Tricot, N.; Tran Dai, P.; Gama, J.M.

    1996-12-31

    The anomaly of control rod cluster drop time revealed at Guandong Nuclear Power Station in Daya Bay and in the Chooz B1 pilot unit for the N4 series, led to the replacement of the M1 type control rod cluster guide tubes with 1300 MWe PWR type guide tubes, adapted to the geometry of the Guandong reactors and the 1450 MWe reactors of the N4 series. The comparison of the drop times obtained with the 1300 MWe type control rod cluster guide 1300 MWe type control rod cluster guide tubes gave satisfactory results. These met the safety criterion for N4 series control rod cluster drop times (2.15 under hot shutdown conditions). The drop time tests which will be carried out in middle of and at the end of cycle 1 of Chooz B1 should make it possible to finally validate the solution already successfully implemented at Guandong. However, this anomaly has revealed the limits of representativeness of the experimental test loops with regard to the real reactor configuration. In view of this, it has been deemed necessary to ask Electricite de France to pursue its analysis both on the understanding of the phenomena which led to this anomaly and on the limits of the representativeness of the experimental test loops. (authors).

  7. ZL26B纤维滤棒成型机组电控系统的改进%Improvement of Electric Control System of ZL26B Fiber Filter Rod Maker

    Institute of Scientific and Technical Information of China (English)

    张静文

    2012-01-01

    在原SIEMENS工控机+PLC+AMK交流伺服驱动系统的控制系统基础上,把最新的控制技术运用其中,并以此为基础设计滤棒成型机控制系统整体方案。%The latest control technology is used to improve the original control system consisted by SIEMENSE PLC, in dustrial PC and AMK AC servo system. The scheme of designing filter rod maker unit control system is based on these technologies.

  8. Geodetic Control Information on Passive Marks: Horizontal and Vertical Geodetic Control Data for the United States - National Geospatial Data Asset (NGDA) Geodetic Control Information on Passive Marks

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data contains a set of geodetic control stations maintained by the National Geodetic Survey. Each geodetic control station in this dataset has either a precise...

  9. Analysis by the Monte Carlo method of doses around the pool of storage of the control rods irradiated in a BWR reactor; Analisis mediante el metodo de Monte Carlo de las dosis alrededor de la piscina de almacenamiento de las barras de control irradiadas en un reactror BWR

    Energy Technology Data Exchange (ETDEWEB)

    Rodenas, J.; Gallardo, S.

    2011-07-01

    The control rods of a boiling water reactor (BWR) are subject to a neutron flux and thus become activated during their stay in the reactor core. Activation occurs especially in the stainless steel components and impurities. The activity generated results in a dose around the bar, while it le unimportant in the reactor, but to be taken into account when removed f ron it. The bars drawn are stored on hangers placed in the storage pools of spent fuel f ron the plant. Each hanger 12 accommodates control rods and are arranged so that at least three meters of water abode the heads of the control rods. The dose received by potentially exposed workers who are in the vicinity of the storage must be calculated to ensure adequate protection of the came. This dose can be decreased significantly by changing the arrangement of the bars on hangers.

  10. DETAILS OF OPERATIONS PERFORMED BY THE REMOTE CONTROL ROBOT (CONCEPT TO THE HORIZONTAL FUEL CHANNEL DURING DECOMMISSIONING PHASE OF NUCLEAR REACTOR CALANDRIA STRUCTURE. PART I: OUTSIDE OPERATIONS

    Directory of Open Access Journals (Sweden)

    Constantin POPESCU

    2017-05-01

    Full Text Available The authors contribution to this paper is to present a concept solution of a remote control robot (RCR used for the horizontal fuel channels pressure tube decommissioning in the CANDU nuclear reactor. The authors highlight in this paper, few details of geometry, operations, constraints by kinematics and dynamics of the robot movement outside of the reactor fuel channel. Outside operations performed has as the main steps of dismantling process the followings: positioning front of Calandria structure at the fuel channel to be decommissioned, coupling and locking to the End Fitting (EF, sorting and storage extracted items in the safe container. All steps are performed in automatic mode. The remote control robot (RCR represents a safety system controlled by sensors and has the capability to analyze any error registered and decide next activities or abort the outside decommissioning procedure in case of any risk rise in order to ensure the environmental and workers protection.

  11. Crystal phase-controlled synthesis of rod-shaped AgInTe2 nanocrystals for in vivo imaging in the near-infrared wavelength region

    Science.gov (United States)

    Kameyama, Tatsuya; Ishigami, Yujiro; Yukawa, Hiroshi; Shimada, Taisuke; Baba, Yoshinobu; Ishikawa, Tetsuya; Kuwabata, Susumu; Torimoto, Tsukasa

    2016-03-01

    Rod-shaped AgInTe2 nanocrystals (NCs) exhibiting intense near-band edge photoluminescence in the near-infrared (NIR) wavelength region, were successfully prepared by the thermal reaction of metal acetates and Te precursors in 1-dodecanethiol. Increasing the reaction temperature resulted in the formation of larger AgInTe2 NCs with crystal structures varying from hexagonal to tetragonal at reaction temperatures of 280 °C or higher. The energy gap was increased from 1.13 to 1.20 eV with a decrease in rod width from 8.3 to 5.6 nm, accompanied by a blue shift in the photoluminescence (PL) peak wavelength from 1097 to 1033 nm. The optimal PL quantum yield was approximately 18% for AgInTe2 NCs with rod widths of 5.6 nm. The applicability of AgInTe2 NCs as a NIR-emitting material for in vivo biological imaging was examined by injecting AgInTe2 NC-incorporated liposomes into the back of a C57BL/6 mouse, followed by in vivo photoluminescence imaging in the NIR region.Rod-shaped AgInTe2 nanocrystals (NCs) exhibiting intense near-band edge photoluminescence in the near-infrared (NIR) wavelength region, were successfully prepared by the thermal reaction of metal acetates and Te precursors in 1-dodecanethiol. Increasing the reaction temperature resulted in the formation of larger AgInTe2 NCs with crystal structures varying from hexagonal to tetragonal at reaction temperatures of 280 °C or higher. The energy gap was increased from 1.13 to 1.20 eV with a decrease in rod width from 8.3 to 5.6 nm, accompanied by a blue shift in the photoluminescence (PL) peak wavelength from 1097 to 1033 nm. The optimal PL quantum yield was approximately 18% for AgInTe2 NCs with rod widths of 5.6 nm. The applicability of AgInTe2 NCs as a NIR-emitting material for in vivo biological imaging was examined by injecting AgInTe2 NC-incorporated liposomes into the back of a C57BL/6 mouse, followed by in vivo photoluminescence imaging in the NIR region. Electronic supplementary information (ESI) available

  12. Degradation and oxidation of B{sub 4}C control rod segments at high temperatures. A review and code interpretation of the BECARRE program

    Energy Technology Data Exchange (ETDEWEB)

    Luze, O. de, E-mail: olivier.de-luze@irsn.fr [Institut de Radioprotection et de Sûreté Nucléaire, PSN-RES, SEMIA, LIMAR, BP 3, F-13115 St Paul Lez Durance Cedex (France)

    2013-06-15

    The paper gives a code-based interpretation of the experimental BECARRE program carried out at the “Institut de Radioprotection et de Sureté Nucléaire” (IRSN) between 2005 and 2010, using the severe accident (SA) code ASTEC/ICARE. As part of the International Source Term Program (ISTP), the BECARRE program focuses on boron carbide (B4C) effects during SA conditions, when B4C is used as an absorber material in French PWRs. Steam oxidation of solid B4C pellets (at 1200–1800 °C), as well as oxidation of molten B4C bearing mixtures up to 9 wt% of B4C dissolution (at 1289–1527 °C) are studied, as well as degradation of 60 cm-long control rod (CR) segments representative of a PWR geometry (up to ∼2000 °C). Temperature and outlet gas releases (steam, H{sub 2}, CO, CO{sub 2}) measured in line, and post-test examinations (radiography, tomography, microscopic examinations) give available data to code validation and interpretation. The oxidation rates of the B4C bearing melts have been found always lower than the rates of the solid pellet oxidation in similar conditions, as modeled in ASTEC. For the degradation of the CRs, it is shown that for temperature above 1600 °C, the main effect of the B4C is more toward a mitigation of the hydrogen production rather than increasing it by additional oxidation of boron compounds. No large increases of the hydrogen release after the failure of the guide tube (GT) have been measured, due to downward relocation of the low viscosity B4C bearing melts inside the 60 cm-height CR segments. The ZrO{sub 2} oxide layer formed on the outer surface of the GT has been found very protective, leading to failure only above 1650 °C. Both isothermal and runaway thermal conditions have been used to bring about limited GT failure showing that the main mechanisms leading to failure are linked to deformation of the initial geometry, close contacts between materials, and subsequent eutectic material formations. Such a limited degradation for

  13. Improvement in Jc performance below liquid nitrogen temperature for SmBa2Cu3Oy superconducting films with BaHfO3 nano-rods controlled by low-temperature growth

    Directory of Open Access Journals (Sweden)

    S. Miura

    2016-01-01

    Full Text Available For use in high-magnetic-field coil-based applications, the critical current density (Jc of REBa2Cu3Oy (REBCO, where RE = rare earth coated conductors must be isotropically improved, with respect to the direction of the magnetic field; these improvements must be realized at the operating conditions of these applications. In this study, improvement of the Jc for various applied directions of magnetic field was achieved by controlling the morphology of the BaHfO3 (BHO nano-rods in a SmBCO film. We fabricated the 3.0 vol. % BHO-doped SmBCO film at a low growth temperature of 720 °C, by using a seed layer technique (Ts = 720 °C film. The low-temperature growth resulted in a morphological change in the BHO nano-rods. In fact, a high number density of (3.1 ± 0.1 × 103 μm−2 of small (diameter: 4 ± 1 nm, discontinuous nano-rods that grew in various directions, was obtained. In Jc measurements, the Jc of the Ts = 720 °C film in all directions of the applied magnetic field was higher than that of the non-doped SmBCO film. The Jcmin (6.4 MA/cm2 of the former was more than 6 times higher than that (1.0 MA/cm2 of the latter at 40 K, under 3 T. The aforementioned results indicated that the discontinuous BHO nano-rods, which occurred with a high number density, exerted a 3D-like flux pinning at the measurement conditions considered. Moreover, at 4.2 K and under 17 T, a flux pinning force density of 1.6 TN/m3 was realized; this value was comparable to the highest value recorded, to date.

  14. Improvement in Jc performance below liquid nitrogen temperature for SmBa2Cu3Oy superconducting films with BaHfO3 nano-rods controlled by low-temperature growth

    Science.gov (United States)

    Miura, S.; Yoshida, Y.; Ichino, Y.; Xu, Q.; Matsumoto, K.; Ichinose, A.; Awaji, S.

    2016-01-01

    For use in high-magnetic-field coil-based applications, the critical current density (Jc) of REBa2Cu3Oy (REBCO, where RE = rare earth) coated conductors must be isotropically improved, with respect to the direction of the magnetic field; these improvements must be realized at the operating conditions of these applications. In this study, improvement of the Jc for various applied directions of magnetic field was achieved by controlling the morphology of the BaHfO3 (BHO) nano-rods in a SmBCO film. We fabricated the 3.0 vol. % BHO-doped SmBCO film at a low growth temperature of 720 °C, by using a seed layer technique (Ts = 720 °C film). The low-temperature growth resulted in a morphological change in the BHO nano-rods. In fact, a high number density of (3.1 ± 0.1) × 103 μm-2 of small (diameter: 4 ± 1 nm), discontinuous nano-rods that grew in various directions, was obtained. In Jc measurements, the Jc of the Ts = 720 °C film in all directions of the applied magnetic field was higher than that of the non-doped SmBCO film. The Jcmin (6.4 MA/cm2) of the former was more than 6 times higher than that (1.0 MA/cm2) of the latter at 40 K, under 3 T. The aforementioned results indicated that the discontinuous BHO nano-rods, which occurred with a high number density, exerted a 3D-like flux pinning at the measurement conditions considered. Moreover, at 4.2 K and under 17 T, a flux pinning force density of 1.6 TN/m3 was realized; this value was comparable to the highest value recorded, to date.

  15. Cone rod dystrophies

    Directory of Open Access Journals (Sweden)

    Hamel Christian P

    2007-02-01

    Full Text Available Abstract Cone rod dystrophies (CRDs (prevalence 1/40,000 are inherited retinal dystrophies that belong to the group of pigmentary retinopathies. CRDs are characterized by retinal pigment deposits visible on fundus examination, predominantly localized to the macular region. In contrast to typical retinitis pigmentosa (RP, also called the rod cone dystrophies (RCDs resulting from the primary loss in rod photoreceptors and later followed by the secondary loss in cone photoreceptors, CRDs reflect the opposite sequence of events. CRD is characterized by primary cone involvement, or, sometimes, by concomitant loss of both cones and rods that explains the predominant symptoms of CRDs: decreased visual acuity, color vision defects, photoaversion and decreased sensitivity in the central visual field, later followed by progressive loss in peripheral vision and night blindness. The clinical course of CRDs is generally more severe and rapid than that of RCDs, leading to earlier legal blindness and disability. At end stage, however, CRDs do not differ from RCDs. CRDs are most frequently non syndromic, but they may also be part of several syndromes, such as Bardet Biedl syndrome and Spinocerebellar Ataxia Type 7 (SCA7. Non syndromic CRDs are genetically heterogeneous (ten cloned genes and three loci have been identified so far. The four major causative genes involved in the pathogenesis of CRDs are ABCA4 (which causes Stargardt disease and also 30 to 60% of autosomal recessive CRDs, CRX and GUCY2D (which are responsible for many reported cases of autosomal dominant CRDs, and RPGR (which causes about 2/3 of X-linked RP and also an undetermined percentage of X-linked CRDs. It is likely that highly deleterious mutations in genes that otherwise cause RP or macular dystrophy may also lead to CRDs. The diagnosis of CRDs is based on clinical history, fundus examination and electroretinogram. Molecular diagnosis can be made for some genes, genetic counseling is

  16. A study on the Horizontal Control of a Seat for Heavy Machinery using a Phase Adjusting Technique

    Directory of Open Access Journals (Sweden)

    Kim Chae-sil.

    2016-01-01

    Full Text Available This study proposes a dynamic plant model to simulate the performance of a heavy equipment vehicle seat system. The system controls the transmission of vibration using a phase adjustment control method. First, a dynamic model for the flexible heavy equipment seat is proposed using a commercial multi-body dynamic analysis tool, ADAMS. This model is used as a plant model. Then a phase adjustment control mechanism for reducing the vibration and shock transmitted by the seat is applied to the driving dynamics control plant model. Angle control using the phase adjustment control was confirmed. This technique is expected to be the basis for a future commercial system.

  17. Inclusion control in spring steel wire rod for automobile springs%汽车用弹簧钢线材夹杂物的控制

    Institute of Scientific and Technical Information of China (English)

    孟耀青; 郑永瑞; 赵昊乾

    2015-01-01

    Corresponding to the development of lightweight car, the design strength of automobile springs goes up higher and higher. The higher the design strength of spring is, the stricter the inclusion requirements for spring steel will be. The cleanness requirements of spring steel wire rod used for automobile springs were analyzed, and then the smelting process in manufacturing spring steel wire rod of advanced enterprises abroad was introduced, and ifnally the research reports about non-metallic inclusions in spring steel at home and abroad were reviewed. It aims at providing references for domestic enterprises to develop or improve spring steel wire rod for automobile springs.%汽车轻量化发展伴随着汽车弹簧使用强度的提高,从而对钢中夹杂物的要求也越高。通过分析典型的汽车弹簧对线材中夹杂物的要求,介绍了国外弹簧钢线材先进生产企业的冶炼工艺,综述了目前国内外关于弹簧钢中夹杂物的研究报道,可为国内弹簧钢线材生产企业开发或改进汽车用弹簧钢线材提供参考。

  18. Controlling morphology and optical properties of self-catalyzed, mask-free GaN rods and nanorods by metal-organic vapor phase epitaxy

    Science.gov (United States)

    Tessarek, C.; Bashouti, M.; Heilmann, M.; Dieker, C.; Knoke, I.; Spiecker, E.; Christiansen, S.

    2013-10-01

    A simple self-catalyzed and mask-free approach will be presented to grow GaN rods and nanorods based on the metal-organic vapor phase epitaxy technique. The growth parameter dependent adjustment of the morphology of the structures will be discussed. Rods and nanorods with diameters reaching from a few μm down to 100 nm, heights up to 48 μm, and densities up to 8ṡ107 cm-2 are all vertically aligned with respect to the sample surface and exhibiting a hexagonal shape with smooth sidewall facets. Optical properties of GaN nanorods were determined using cathodoluminescence. It will be shown that the optical properties can be improved just by reducing the Ga precursor flow. Furthermore, for regular hexagonal shaped rods and nanorods, whispering gallery modes with quality factors up to 500 were observed by cathodoluminescence pointing out high morphological quality of the structures. Structural investigations using transmission electron microscopy show that larger GaN nanorods (diameter > 500 nm) contain threading dislocations in the bottom part and vertical inversion domain boundaries, which separate a Ga-polar core from a N-polar shell. In contrast, small GaN nanorods (˜200 nm) are largely free of such extended defects. Finally, evidence for a self-catalyzed, Ga-induced vapor-liquid-solid growth will be discussed.

  19. Experimental analysis of liquid-metal reactor scram rod kinematic characteristics

    Science.gov (United States)

    Konovalenko, F. D.; Kondrashov, S. I.

    2017-01-01

    This article represents the results of computational and experimental research of liquid-metal research reactor control rod kinematics. In this research liquid-metal coolant (sodium) was simulated by water. Investigation of control rod scram-mode movement duration and investigation of velocity of movable parts near the bump of damper are the purposes of this research. Also mathematic simulation of control rod movement in scram mode was performed. Computational results for some modes of water circulation comply with experimental results well. Results of this work will be used for tests of scram rod drive of above-named research reactor. It will significantly simplify the scram rod drive testing stand construction.

  20. Active Brownian rods

    Science.gov (United States)

    Peruani, Fernando

    2016-11-01

    Bacteria, chemically-driven rods, and motility assays are examples of active (i.e. self-propelled) Brownian rods (ABR). The physics of ABR, despite their ubiquity in experimental systems, remains still poorly understood. Here, we review the large-scale properties of collections of ABR moving in a dissipative medium. We address the problem by presenting three different models, of decreasing complexity, which we refer to as model I, II, and III, respectively. Comparing model I, II, and III, we disentangle the role of activity and interactions. In particular, we learn that in two dimensions by ignoring steric or volume exclusion effects, large-scale nematic order seems to be possible, while steric interactions prevent the formation of orientational order at large scales. The macroscopic behavior of ABR results from the interplay between active stresses and local alignment. ABR exhibit, depending on where we locate ourselves in parameter space, a zoology of macroscopic patterns that ranges from polar and nematic bands to dynamic aggregates.

  1. Investigating the optical XNOR gate using plasmonic nano-rods

    Science.gov (United States)

    Akhlaghi, Majid; Kaboli, Milad

    2016-04-01

    In this paper, a coherent perfect absorption (CPA)-type XNOR gate based on plasmonic nano particle is proposed. It consists of two plasmonic nano rod arrays on top of two parallel arms with quartz substrate. The operation principle is based on the absorbable formation of a conductive path in the dielectric layer of a plasmonic nano-particles waveguide. Since the CPA efficiency depends strongly on the number of plasmonic nano-rod and the nano rod location, an efficient binary optimization method based the Particle Swarm Optimization (PSO) algorithm is used to design an optimized array of the plasmonic nano-rod in order to achieve the maximum absorption coefficient in the 'off' state and the minimum absorption coefficient in the 'on' state. In Binary PSO (BPSO), a group of birds consists a matrix with binary entries, control the presence ('1‧) or the absence ('0‧) of nano rod in the array.

  2. Rod and Rod-driven Function in Achromatopsia and Blue Cone Monochromatism

    Science.gov (United States)

    Moskowitz, Anne; Hansen, Ronald M.; Akula, James D.; Eklund, Susan E.; Fulton, Anne B.

    2008-01-01

    Purpose To evaluate rod photoreceptor and postreceptor retinal function in pediatric patients with achromatopsia (ACHR) and blue cone monochromatism (BCM) using contemporary electroretinographic (ERG) procedures. Methods Fifteen patients (age 1 to 20 years) with ACHR and six patients (age 4 to 22 years) with BCM were studied. ERG responses to full-field stimuli were obtained in scotopic and photopic conditions. Rod photoreceptor (Srod, Rrod) and rod-driven postreceptor (log σ, Vmax) response parameters were calculated from the a-wave and b-wave. The ERG records were digitally filtered to demonstrate the oscillatory potentials (OPs); a sensitivity parameter, log SOPA1/2, and an amplitude parameter, SOPAmax, were used to characterize the OP response. Response parameters were compared to those of 12 normal control subjects. Results As expected, photopic responses were non-detectable in patients with ACHR and BCM. In addition, mean scotopic photoreceptor (Rrod) and postreceptor (Vmax and SOPAmax) amplitude parameters were significantly reduced compared to those in normal controls. The flash intensity required to evoke a half maximum b-wave amplitude (log σ) was significantly increased. Conclusions The results of this study provide evidence that deficits in rod and rod mediated function occur in the primary cone dysfunction syndromes, achromatopsia and blue cone monochromatism. PMID:18824728

  3. Optimization of fuel rod enrichment distribution for BWR fuel assembly

    Energy Technology Data Exchange (ETDEWEB)

    Hirano, Yasushi; Hida, Kazuki; Sakurada, Koichi; Yamamoto, Munenari [Toshiba Corp., Kawasaki, Kanagawa (Japan). Nuclear Engineering Lab.

    1996-09-01

    A practical method was developed for determining the optimum fuel enrichment distribution within a boiling water reactor fuel assembly. The method deals with two different optimization problems, i.e. the combinatorial optimization problem of grouping fuel rods into a given number of rod groups with the same enrichment, and the problem of determining an optimal enrichment for each fuel rod under the resultant rod-grouping pattern. In solving these problems, the primary goal is to minimize a predefined objective function over a given exposure period. The objective function used here is defined by the linear combination C{sub 1}X + C{sub 2}X{sub G}, where X and X{sub G} stand, respectively, for control variables giving constraint to the local power peaking factor and the gadolinium rod power. C{sub 1} and C{sub 2} are user-definable weighting factors to accommodate design preferences. The algorithm for solving this combinatorial optimization problem starts by finding the optimal enrichment vector without any rod-grouping, and promising candidates of rod-grouping patterns are found by exhaustive enumeration based on the resulting fuel enrichment ordering. This latter problem is solved using the method of approximation programming. A practical application is shown for a contemporary 8 x 8 Pu mixed-oxide fuel assembly with 10 gadolinium-poisoned rods. (author)

  4. Morphological Diversity of the Rod Spherule: A Study of Serially Reconstructed Electron Micrographs.

    Directory of Open Access Journals (Sweden)

    Shuai Li

    Full Text Available Rod spherules are the site of the first synaptic contact in the retina's rod pathway, linking rods to horizontal and bipolar cells. Rod spherules have been described and characterized through electron micrograph (EM and other studies, but their morphological diversity related to retinal circuitry and their intracellular structures have not been quantified. Most rod spherules are connected to their soma by an axon, but spherules of rods on the surface of the Mus musculus outer plexiform layer often lack an axon and have a spherule structure that is morphologically distinct from rod spherules connected to their soma by an axon. Retraction of the rod axon and spherule is often observed in disease processes and aging, and the retracted rod spherule superficially resembles rod spherules lacking an axon. We hypothesized that retracted spherules take on an axonless spherule morphology, which may be easier to maintain in a diseased state. To test our hypothesis, we quantified the spatial organization and subcellular structures of rod spherules with and without axons. We then compared them to the retracted spherules in a disease model, mice that overexpress Dscam (Down syndrome cell adhesion molecule, to gain a better understanding of the rod synapse in health and disease.We reconstructed serial EM images of wild type and DscamGoF (gain of function rod spherules at a resolution of 7 nm in the X-Y axis and 60 nm in the Z axis. Rod spherules with and without axons, and retracted spherules in the DscamGoF retina, were reconstructed. The rod spherule intracellular organelles, the invaginating dendrites of rod bipolar cells and horizontal cell axon tips were also reconstructed for statistical analysis.Stereotypical rod (R1 spherules occupy the outer two-thirds of the outer plexiform layer (OPL, where they present as spherical terminals with large mitochondria. This spherule group is highly uniform and composed more than 90% of the rod spherule population. Rod

  5. Cuisenaire Rods Go to College.

    Science.gov (United States)

    Chinn, Phyllis; And Others

    1992-01-01

    Presents examples of questions and answers arising from a hands-on and exploratory approach to discrete mathematics using cuisenaire rods. Combinatorial questions about trains formed of cuisenaire rods provide the setting for discovering numerical patterns by experimentation and organizing the results using induction and successive differences.…

  6. Development of a reflectron time-of-flight mass spectrometer for non-destructive analysis of isotope ratios in irradiated B4C pellets--Test measurements on an unirradiated control rod pellet

    Science.gov (United States)

    Manoravi, P.; Joseph, M.; Sivakumar, N.

    2008-09-01

    A laser mass spectrometric facility is developed using a home-built reflectron time-of-flight mass spectrometer (RTOFMS) to analyze the boron isotopic ratio 10B/11B in the irradiated B4C pellets of the FBTR control rod. Compared to other mass spectrometry-based methods, the present method is practically non-destructive and makes it relatively easier to handle irradiated (radioactive) B4C pellets through remote operation. The results with inactive samples indicate that the method yields 10B percentage values, accurate to within ±1%.

  7. Optimization of fuel rod enrichment distribution to minimize rod power peaking throughout life within BWR fuel assembly

    Energy Technology Data Exchange (ETDEWEB)

    Hirano, Yasushi; Hida, Kazuki; Sakurada, Koichi; Yamamoto, Munenari [Toshiba Corp., Kawasaki, Kanagawa (Japan). Nuclear Engineering Lab.

    1997-01-01

    A practical method was developed for determining the optimum fuel enrichment distribution within a boiling water reactor fuel assembly. The method deals with two different optimization problems, i.e. a combinatorial optimization problem grouping fuel rods into a given number of rod groups with the same enrichment, and a problem determining an optimal enrichment for each fuel rod under the resultant rod-grouping pattern. In solving these problems, the primary goal is to minimize a predefined objective function over a given exposure period. The objective function used here is defined by a linear combination: C{sub 1}X+C{sub 2}X{sub G}, where X and X{sub G} stand for a control variable to give the constraint respectively for a local power peaking factor and a gadolinium rod power, and C{sub 1} and C{sub 2} are user-definable weighting factor to accommodate the design preference. The algorithm of solving the combinatorial optimization problem starts with finding the optimal enrichment vector without any rod-grouping, and promising candidates of rod-grouping patterns are found by exhaustive enumeration based on the resulting fuel enrichment ordering, and then the latter problem is solved by using the method of approximation programming. The practical application of the present method is shown for a contemporary 8x8 Pu mixed-oxide fuel assembly with 10 gadolinium-poisoned rods. (author)

  8. Fabrication of preliminary fuel rods for SFR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sun Ki; Oh, Seok Jin; Ko, Young Mo; Woo, Youn Myung; Kim, Ki Hwan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    Metal fuels was selected for fueling many of the first reactors in the US, including the Experimental Breeder Reactor-I (EBR-I) and the Experimental Breeder Reactor-II (EBR-II) in Idaho, the FERMI-I reactor, and the Dounreay Fast Reactor (DFR) in the UK. Metallic U.Pu.Zr alloys were the reference fuel for the US Integral Fast Reactor (IFR) program. Metallic fuel has advantages such as simple fabrication procedures, good neutron economy, high thermal conductivity, excellent compatibility with a Na coolant and inherent passive safety. U-Zr-Pu alloy fuels have been used for SFR (sodium-cooled fast reactor) related to the closed fuel cycle for managing minor actinides and reducing a high radioactivity levels since the 1980s. Fabrication technology of metallic fuel for SFR has been in development in Korea as a national nuclear R and D program since 2007. For the final goal of SFR fuel rod fabrication with good performance, recently, three preliminary fuel rods were fabricated. In this paper, the preliminary fuel rods were fabricated, and then the inspection for QC(quality control) of the fuel rods was performed

  9. Brownian rod scheme in microenvironment sensing

    Directory of Open Access Journals (Sweden)

    Ian Gralinski

    2012-03-01

    Full Text Available Fluctuations of freely translating spherical particles via Brownian motion should provide inexhaustible information about the micro-environment, but is beset by the problem of particles drifting away from the venue of measurement as well as colliding with other particles. We propose a scheme here to circumvent this in which a Brownian rod that lies in proximity to a cylindrical pillar is drawn in by a tuneable attractive force from the pillar. The force is assumed to act through the centre of each body and the motion exclusive to the x-y plane. Simulation studies show two distinct states, one in which the rod is moving freely (state I and the other in which the rod contacts the cylinder surface (state II. Information about the micro-environment could be obtained by tracking the rotational diffusion coefficient Dθ populating in either of these two states. However, the magnitude of the normalized charge product in excess of 6.3x104 was found necessary for a rod of 6.81 × 0.93 μm2 (length × diameter and 10μm diameter cylindrical pillar to minimize deviation errors. It was also found that the extent of spatial sensing coverage could be controlled by varying the charge level. The conditions needed to ascertain the rotational sampling for angle determination through the Hough transform were also discussed.

  10. Evaluation of the reduction of boron-10 in the control rods in the BWR of the Laguna Verde Central, through steady state calculations; Evaluacion de la reduccion del Boro-10 en las barras de control en los BWR de la CLV, mediante calculos en estado estacionario

    Energy Technology Data Exchange (ETDEWEB)

    Montes T, J.L.; Perusquia, R.; Hernandez, J.L.; Ramirez S, J.R. [Departamento de Sistemas Nucleares, ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    One of the more important aspects related with the safety and economy in the operation of a nuclear power reactor, it is without a doubt the control of the reactivity. During the normal operation of a reactor of boiling water (BWR-Boiling Water Reactor), the control of the reactivity in the nucleus it is strongly determined by the efficiency of the control rods. In the case of the Laguna Verde Nuclear power station (CNLV) the nucleus of the reactors has 109 control rods grouped in 4 sets. The CNLV at the moment uses the CCC method (Control Cell Core) in the design of the cycle. With this method only the A2 group is used for the control of the reactivity at full power. With the purpose of quantifying the effect of the decrease of the burnable poison (B{sub 4}C) of the control rods and in particular to the effect due to the postulated lost of 10% of Boron 10, it was carried out a series of calculations of the nucleus in stationary state by means of the system of HELIOS/CM-PRESTO codes. In this work the main derived results of these 3D simulations(three dimensions) of the reactors of the CNLV are presented. It was analyzed the one behavior of the infinite neutron multiplication factor (K{sub infinite}), at fuel assemble cell level used in an equilibrium cycle for the CNLV. It was also analyzed the effect in the shutdown margin (ShutDown Margin- SDM) in cold condition CZP (Cold Zero Power). Its are also included those results of the ARI cases (All Rods In) and SRO (Strong Rod Out). From the cases in condition HFP (Hot Full Power) the behavior of the effective multiplication factor (K{sub eff}) is presented. (Author)

  11. Light-controlled one-sided growth of large plasmonic gold domains on quantum rods observed on the single particle level

    Science.gov (United States)

    Carbone, Luigi; Jakab, Arpad; Khalavka, Yuriy; Sönnichsen, Carsten

    2010-02-01

    We create large gold domains (up to 15 nm) exclusively on one side of CdS or CdSe/CdS quantum rods by photoreduction of gold ions under anaerobic conditions. Electrons generated in the semiconductor by UV stimulation migrate to one tip where they reduce gold ions. Large gold domains eventually form; these support efficient plasmon oscillations with a light scattering cross section large enough to visualize single hybrid particles in a dark-field microscope during growth in real time.

  12. UAS in the NAS Air Traffic Controller Acceptability Study-1: The Effects of Horizontal Miss Distances on Simulated UAS and Manned Aircraft Encounters

    Science.gov (United States)

    Ghatas, Rania W.; Comstock, James R., Jr.; Consiglio, Maria C.; Chamberlain, James P.; Hoffler, Keith D.

    2015-01-01

    This study examined air traffic controller acceptability ratings based on the effects of differing horizontal miss distances (HMDs) for encounters between UAS and manned aircraft. In a simulation of the Dallas/Fort Worth (DFW) East-side airspace, the CAS-1 experiment at NASA Langley Research Center enlisted fourteen recently retired DFW air traffic controllers to rate well-clear volumes based on differing HMDs that ranged from 0.5 NM to 3.0 NM. The controllers were tasked with rating these HMDs from "too small" to "too excessive" on a defined, 1-5, scale and whether these distances caused any disruptions to the controller and/or to the surrounding traffic flow. Results of the study indicated a clear favoring towards a particular HMD range. Controller workload was also measured. Data from this experiment and subsequent experiments will play a crucial role in the FAA's establishment of rules, regulations, and procedures to safely and efficiently integrate UAS into the NAS.

  13. Investigation of the use of an electronic multifunction display and an electromechanical horizontal situation indicator for guidance and control of powered-lift short-haul aircraft

    Science.gov (United States)

    Clement, W. F.

    1976-01-01

    The use which pilots make of a moving map display from en route through the terminal area and including the approach and go-around flight phases was investigated. The content and function of each of three primary STOLAND displays are reviewed from an operational point of view. The primary displays are the electronic attitude director indicator (EADI), the horizontal situation indicator (HSI), and the multifunction display (MFD). Manually controlled flight with both flight director guidance and raw situation data is examined in detail in a simulated flight experiment with emphasis on tracking reference flight plans and maintaining geographic orientation after missed approaches. Eye-point-of-regard and workload measurements, coupled with task performance measurements, pilot opinion ratings, and pilot comments are presented. The experimental program was designed to offer a systematic objective and subjective comparison of pilots' use of the moving map MFD in conjunction with the other displays.

  14. Age-related decrease in rod bipolar cell density of the human retina: an immunohistochemical study

    Indian Academy of Sciences (India)

    P Aggarwal; T C Nag; S Wadhwa

    2007-03-01

    During normal ageing, the rods (and other neurones) undergo a significant decrease in density in the human retina from the fourth decade of life onward. Since the rods synapse with the rod bipolar cells in the outer plexiform layer, a decline in rod density (mainly due to death) may ultimately cause an associated decline of the neurones which, like the rod bipolar cells, are connected to them. The rod bipolar cells are selectively stained with antibodies to protein kinase C-. This study examined if rod bipolar cell density changes with ageing of the retina, utilizing donor human eyes (age: 6–91 years). The retinas were fixed and their temporal parts from the macula to the mid-periphery sectioned and processed for protein kinase C- immunohistochemistry. The density of the immunopositive rod bipolar cells was estimated in the mid-peripheral retina (eccentricity: 3–5 mm) along the horizontal temporal axis. The results show that while there is little change in the density of the rod bipolar cells from 6 to 35 years (2.2%), the decline during the period from 35 to 62 years is about 21% and between seventh and tenth decades, it is approximately 27%.

  15. Technical Development of Gamma Scanning for Irradiated Fuel Rod after Upgrade of System in Hot-cell

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Woo Seog; Kim, Hee Moon; Baik, Seung Je; Yoo, Byung Ok; Choo, Yong Sun

    2007-06-15

    Non-destructive test system was installed at hot-cell(M1) in IMEF(Irradiated Materials Examination Facility) more than 10 years ago for the diametric measurement and gamma scanning of fuel rod. But this system must be needed to be remodeled for the effective operations. In 2006, the system was upgraded for 3 months. The collimator bench can be movable with horizontal direction(x-direction) by motorized system for sectional gamma scanning and 3-dimensional tomography of fuel rod. So, gamma scanning for fuel rod can be detectable by x, y and rotation directions. It may be possible to obtain the radioactivities with radial and axial directions of pellet. This system is good for the series experiments with several positions. Operation of fuel bench and gamma detection program were linked each other by new program tools. It can control detection and bench moving automatically when gamma inspection of fuel rod is carried out with axial or radial positions. Some of electronic parts were added in PLC panel, and operating panel was re-designed for the remote control. To operate the fuel bench by computer, AD converter and some I/O cards were installed in computer. All of software were developed in Windows-XP system instead of DOS system. Control programs were made by visual-C language. After upgrade of system, DUPIC fuel which was irradiated in HANARO research reactor was detected by gamma scanning. The results were good and operation of gamma scanning showed reduced inspection time and easy control of data on series of detection with axial positions. With consideration of ECT(Eddy Current Test) installation, the computer program and hardware were set up as well. But ECT is not installed yet, so we have to check abnormal situation of program and hardware system. It is planned to install ECT in 2007.

  16. REALISATION TRAJECTORY CONTROL IN A HORIZONTAL WITH ADAPTIVE ALGORITHM OF MANAGEMENT OF THWART MOTION OF THE PLANE

    Directory of Open Access Journals (Sweden)

    D. V. Vereshikov

    2014-01-01

    Full Text Available In article results of researches are presented according to efficiency of application of adaptive algorithm of management by the maneuverable plane realised in a cross-section control path, on the basis of identification of some aerodynamic characteristics of the plane and the indignations caused by formation by an asymmetrical configuration of placing of external suspension. By modelling of movement of the plane during performance S - figurative maneuvers with use of a programmno-modelling complex and the flight stand substantial improvement of characteristics of controllability of the asymmetrical plane and, thus, increase of efficiency of its application is shown.

  17. Natural convection heat transfer within horizontal spent nuclear fuel assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Canaan, R.E.

    1995-12-01

    Natural convection heat transfer is experimentally investigated in an enclosed horizontal rod bundle, which characterizes a spent nuclear fuel assembly during dry storage and/or transport conditions. The basic test section consists of a square array of sixty-four stainless steel tubular heaters enclosed within a water-cooled rectangular copper heat exchanger. The heaters are supplied with a uniform power generation per unit length while the surrounding enclosure is maintained at a uniform temperature. The test section resides within a vacuum/pressure chamber in order to subject the assembly to a range of pressure statepoints and various backfill gases. The objective of this experimental study is to obtain convection correlations which can be used in order to easily incorporate convective effects into analytical models of horizontal spent fuel systems, and also to investigate the physical nature of natural convection in enclosed horizontal rod bundles in general. The resulting data consist of: (1) measured temperatures within the assembly as a function of power, pressure, and backfill gas; (2) the relative radiative contribution for the range of observed temperatures; (3) correlations of convective Nusselt number and Rayleigh number for the rod bundle as a whole; and (4) correlations of convective Nusselt number as a function of Rayleigh number for individual rods within the array.

  18. Determination of the rod-wire transition length in colloidal indium phosphide quantum rods.

    Science.gov (United States)

    Wang, Fudong; Buhro, William E

    2007-11-21

    Colloidal InP quantum rods (QRs) having controlled diameters and lengths are grown by the solution-liquid-solid method, from Bi nanoparticles in the presence of hexadecylamine and other conventional quantum dot surfactants. These quantum rods show band-edge photoluminescence after HF photochemical etching. Photoluminescence efficiency is further enhanced after the Bi tips are selectively removed from the QRs by oleic acid etching. The QRs are anisotropically 3D confined, the nature of which is compared to the corresponding isotropic 3D confinement in quantum dots and 2D confinement in quantum wires. The 3D-2D rod-wire transition length is experimentally determined to be 25 nm, which is about 2 times the bulk InP exciton Bohr radius (of approximately 11 nm).

  19. A Novel Real-Time Path Servo Control of a Hardware-in-the-Loop for a Large-Stroke Asymmetric Rod-Less Pneumatic System under Variable Loads.

    Science.gov (United States)

    Lin, Hao-Ting

    2017-06-04

    This project aims to develop a novel large stroke asymmetric pneumatic servo system of a hardware-in-the-loop for path tracking control under variable loads based on the MATLAB Simulink real-time system. High pressure compressed air provided by the air compressor is utilized for the pneumatic proportional servo valve to drive the large stroke asymmetric rod-less pneumatic actuator. Due to the pressure differences between two chambers, the pneumatic actuator will operate. The highly nonlinear mathematical models of the large stroke asymmetric pneumatic system were analyzed and developed. The functional approximation technique based on the sliding mode controller (FASC) is developed as a controller to solve the uncertain time-varying nonlinear system. The MATLAB Simulink real-time system was a main control unit of a hardware-in-the-loop system proposed to establish driver blocks for analog and digital I/O, a linear encoder, a CPU and a large stroke asymmetric pneumatic rod-less system. By the position sensor, the position signals of the cylinder will be measured immediately. The measured signals will be viewed as the feedback signals of the pneumatic servo system for the study of real-time positioning control and path tracking control. Finally, real-time control of a large stroke asymmetric pneumatic servo system with measuring system, a large stroke asymmetric pneumatic servo system, data acquisition system and the control strategy software will be implemented. Thus, upgrading the high position precision and the trajectory tracking performance of the large stroke asymmetric pneumatic servo system will be realized to promote the high position precision and path tracking capability. Experimental results show that fifth order paths in various strokes and the sine wave path are successfully implemented in the test rig. Also, results of variable loads under the different angle were implemented experimentally.

  20. Comparison of different heuristic techniques for the optimization of control rod patterns; Comparacion de diferentes tecnicas heuristicas para la optimizacion del diseno de patrones de barras de control

    Energy Technology Data Exchange (ETDEWEB)

    Castillo M, J.A.; Ortiz S, J.J.; Perusquia C, R.; Montes T, J.L.; Hernandez M, J.L. [ININ, Carretera Mexico-Toluca s/n, 52750 La Marquesa, Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: jacm@nuclear.inin.mx

    2007-07-01

    Presently work a comparison, using different methodologies, with the results obtained for the optimization of the design of control bar patterns for boiling water reactors is carried out. The results were obtained considering the same conditions for all the used methodologies, which are part of the combinatory optimization, these were programmed in FORTRAN 77 language under the UNIX platform in an ALPHA work station. The techniques used to carry out the optimization are the following ones, Genetic Algorithms, Dispersed Search, Taboo Search, Ants Colonies and Neural Networks. The objective function used is the same one in all the cases, in this its are included the MFLPD thermal limits (maximum fraction of power density to the end of the operation cycle), MPGR (Maxim rate of power generation at the end of the operation cycle) and MFLCPR (maximum fraction for the critical power ratio at the end of the operation cycle), of equal form it is included the criticality condition for the reactor and it is needed the Power Axial Profile in each step of burnt to be adjusted to a proposed Power Axial Profile. The CM-PRESTO code (Scandpower) was used to evaluate the proposed designs. The approach used for the comparison is essentially the k{sub eff} at the cycle end, as well as the thermal limits performance, nevertheless, it is also analyzed the exchanges number among the shallow and deep positions, and the total number of movements carried out during the complete cycle. (Author)

  1. Sensitivity Analysis of the Transmission Chain of a Horizontal Machining Tool Axis to Design and Control Parameters

    Directory of Open Access Journals (Sweden)

    Stefano Mauro

    2014-03-01

    Full Text Available This paper reports how a numerical controlled machine axis was studied through a lumped parameter model. Firstly, a linear model was derived in order to apply a modal analysis, which estimated the first mechanical frequency of the system as well as its damping coefficients. Subsequently, a nonlinear system was developed by adding friction through experimentation. Results were validated through the comparison with a commercial servoaxis equipped with a Siemens controller. The model was then used to evaluate the effect of the stiffness of the structural parts of the axis on its first natural frequency. It was further used to analyse precision, energy consumption, and axis promptness. Finally a cost function was generated in order to find an optimal value for the main proportional gain of the position loop.

  2. Eulerian formulation of elastic rods

    Science.gov (United States)

    Huynen, Alexandre; Detournay, Emmanuel; Denoël, Vincent

    2016-06-01

    In numerous biological, medical and engineering applications, elastic rods are constrained to deform inside or around tube-like surfaces. To solve efficiently this class of problems, the equations governing the deflection of elastic rods are reformulated within the Eulerian framework of this generic tubular constraint defined as a perfectly stiff normal ringed surface. This reformulation hinges on describing the rod-deformed configuration by means of its relative position with respect to a reference curve, defined as the axis or spine curve of the constraint, and on restating the rod local equilibrium in terms of the curvilinear coordinate parametrizing this curve. Associated with a segmentation strategy, which partitions the global problem into a sequence of rod segments either in continuous contact with the constraint or free of contact (except for their extremities), this re-parametrization not only trivializes the detection of new contacts but also transforms these free boundary problems into classic two-points boundary-value problems and suppresses the isoperimetric constraints resulting from the imposition of the rod position at the extremities of each rod segment.

  3. Status of rod consolidation, 1988

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, W.J.

    1989-01-01

    It is estimated that the spent fuel storage pools at some domestic light-water reactors will run out of space before 2003, the year that the US Department of Energy currently predicts it will have a repository available. Of the methods being studied to alleviate the problem, rod consolidation is one of the leading candidates for achieving more efficient use of existing space in spent fuel storage pools. Rod consolidation involves mechanically removing all the fuel rods from the fuel assembly hardware (i.e., the structural components) and placing the fuel rods in a close-packed array in a canister without space grids. A typical goal of rod consolidation systems is to insert the fuel rods from two fuel assemblies into a canister that has the same exterior dimensions as one standard fuel assembly (i.e., to achieve a consolidation or compaction ratio of 2:1) and to compact the nonfuel-bearing structural components from those two fuel assemblies by a factor of 10 to 20. This report provides an overview of the current status of rod consolidation in the United States and a small amount of information on related activities in other countries. 85 refs., 36 figs., 5 tabs.

  4. 台球杆皮头对杆法控制的影响分析%An analysis on the influence of the pool cue tip to rod method control

    Institute of Scientific and Technical Information of China (English)

    赵晓光

    2014-01-01

    Billiard is not only the competition of accuracy, but also the control of main ball blocking. The hardness of tip has an influence on main ball blocking at rod method control, especially in distance, the effect of mild tip is worse than hard one, and the hand feeling is better than hard one. Learning the influence factors of tip to rod method and rational techniques could improve the level.%台球不仅是准度的比拼,更关键是对主球走位的掌控。在杆法控制时皮头的硬度对主球的走位影响还是较大的,尤其是远距离的主球走位,软皮头效果不如较硬的皮头效果好,较硬的皮头在手感上又不如软性皮头好。了解皮头对杆法的影响能达到提高技术水平的目的。

  5. 2D model for melt progression through rods and debris

    Energy Technology Data Exchange (ETDEWEB)

    Fichot, F. [IPSN/DRS, CEA Cadarache, St. Paul-lez-Durance (France)

    2001-07-01

    During the degradation of a nuclear core in a severe accident scenario, the high temperatures reached lead to the melting of materials. The formation of liquid mixtures at various elevations is followed by the flow of molten materials through the core. Liquid mixture may flow under several configurations: axial relocation along the rods, horizontal motion over a plane surface such as the core support plate or a blockage of material, 2D relocation through a debris bed, etc.. The two-dimensional relocation of molten material through a porous debris bed, implemented for the simulation of late degradation phases, has opened a new way to the elaboration of the relocation model for the flow of liquid mixture along the rods. It is based on a volume averaging method, where wall friction and capillary effects are taken into account by introducing effective coefficients to characterize the solid matrix (rods, grids, debris, etc.). A local description of the liquid flow is necessary to derive the effective coefficients. Heat transfers are modelled in a similar way. The derivation of the conservation equations for the liquid mixture falling flow (momentum) in two directions (axial and radial-horizontal) and for the heat exchanges (energy) are the main points of this new model for simulating melt progression. In this presentation, the full model for the relocation and solidification of liquid materials through a rod bundle or a debris bed is described. It is implemented in the ICARE/CATHARE code, developed by IPSN in Cadarache. The main improvements and advantages of the new model are: A single formulation for liquid mixture relocation, in 2D, either through a rod bundle or a porous debris bed, Extensions to complex structures (grids, by-pass, etc..), The modeling of relocation of a liquid mixture over plane surfaces. (author)

  6. Surface properties of sprayed and electrodeposited ZnO rod layers

    Science.gov (United States)

    Gromyko, I.; Krunks, M.; Dedova, T.; Katerski, A.; Klauson, D.; Oja Acik, I.

    2017-05-01

    Herein we present a comparative study on as-deposited, two-month-stored, and heat-treated ZnO rods obtained by spray pyrolysis (SP) at 550 °C, and electrodeposition (ED) at 80 °C. The aim of the study is to establish the reason for different behaviour of wettability and photocatalytic activity (PA) of SP and ED rods. Samples were studied using XPS, SEM, XRD, Raman, contact angle (CA) measurements and photocatalytic oxidation of doxycycline. Wettability and PA are mainly controlled by surface composition rather than by morphology. The relative amount of hydroxyl groups on the surface of as-deposited ED rods is four times higher compared to as-deposited SP rods. Opposite to SP rods, ED rods contain oxygen vacancy defects (Vo). Therefore, as-deposited ED rods are superhydrophilic (CA ∼ 3°) and show highest PA among studied samples, being three times higher compared to SP rods (removing of 75% of doxycycline after 30 min). It was revealed that as-deposited ED rods are inclined to faster contamination. The amount of Cdbnd C groups on the surface of aged ED rods is six times higher compared to aged SP rods. Stored ED samples become hydrophobic (CA ∼ 120°) and PA decreases sharply while SP rods remain hydrophilic (CA ∼ 50°), being more resistive to the contamination.

  7. DETAILS OF OPERATIONS PERFORMED BY THE REMOTE CONTROL ROBOT (CONCEPT TO THE HORIZONTAL FUEL CHANNEL DURING DECOMMISSIONING PHASE OF NUCLEAR REACTOR CALANDRIA STRUCTURE. PART II: INSIDE OPERATIONS

    Directory of Open Access Journals (Sweden)

    Constantin POPESCU

    2017-05-01

    Full Text Available The authors contribution to this paper is to present a concept solution of a remote control robot (RCR used for decommissioning of the horizontal fuel channels pressure tube in the CANDU nuclear reactor. In this paper the authors highlight few details of geometry, operations, constraints by kinematics and dynamics of the robot movement inside of the reactor fuel channel. Inside operations performed has as the main steps of dismantling process the followings: unblock and extract the channel closure plug (from End Fitting - EF, unblock and extract the channel shield plug (from Lattice Tube - LT, cut the ends of the pressure tube, extract the pressure tube and cut it in small parts, sorting and storage extracted items in the safe robot container. All steps are performed in automatic mode. The remote control robot (RCR represents a safety system controlled by sensors and has the capability to analyze any error registered and decide next activities or abort the inside decommissioning procedure in case of any risk rise in order to ensure the environmental and workers protection.

  8. On the Hydraulics of Flowing Horizontal Wells

    Science.gov (United States)

    Bian, A.; Zhan, H.

    2003-12-01

    A flowing horizontal well is a special type of horizontal well that does not have pumping/injecting facility. The discharge rate of a flowing horizontal well is controlled by the hydraulic gradient between the aquifer and the well and it generally varies with time if the hydraulic head of the aquifer is transient. This type of well has been used in landslide control, mining dewatering, water table control, underground water transportation through a horizontal tunnel, agricultural water drainage, and other applications. Flowing horizontal wells have quite different hydrodynamic characteristics from horizontal wells with fixed pumping or injecting rates because their discharge rates are functions of the aquifer hydraulic heads (Zhan et al, 2001; Zhan and Zlotnik, 2002). Hydraulics of flowing horizontal wells have rarely been studied although the hydraulics of flowing vertical wells have been extensively investigated before. The purpose of this paper is to obtain analytical solutions of groundwater flow to a flowing horizontal-well in a confined aquifer, in a water table aquifer without precipitation, and in a water table aquifer with precipitation. The functions of the flowing horizontal well discharge rates versus time will be obtained under above mentioned different aquifer conditions. The relationships of the aquifer hydraulic heads versus the discharge rates of the well will be investigated. The rate of water table decline due to the dewatering of the well will also be computed, and this solution is particularly useful for landslide control and mining dewatering. The theoretical solutions will be compared with results of experiments that will be conducted in the hydrological laboratory at Texas A&M University. Reference: Zhan, H., Wang, L.V., and Park, E, On the horizontal well pumping tests in the anisotropic confined aquifers, J. hydrol., 252, 37-50, 2001. Zhan, H., and Zlotnik, V. A., Groundwater flow to a horizontal or slanted well in an unconfined aquifer

  9. ELECTROMAGNETIC APPARATUS FOR MOVING A ROD

    Science.gov (United States)

    Young, J.N.

    1957-08-20

    An electromagnetic device for moving an object in a linear path by increments is described. The device is specifically adapted for moving a neutron absorbing control rod into and out of the core of a reactor and consists essentially of an extension member made of magnetic material connected to one end of the control rod and mechanically flexible to grip the walls of a sleeve member when flexed, a magnetic sleeve member coaxial with and slidable between limit stops along the flexible extension, electromagnetic coils substantially centrally located with respect to the flexible extension to flex the extension member into gripping engagement with the sleeve member when ener gized, moving electromagnets at each end of the sleeve to attract the sleeve when energized, and a second gripping electromagnet positioned along the flexible extension at a distance from the previously mentioned electromagnets for gripping the extension member when energized. In use, the second gripping electromagnet is deenergized, the first gripping electromagnet is energized to fix the extension member in the sleeve, and one of the moving electromagnets is energized to attract the sleeve member toward it, thereby moving the control rod.

  10. 基于SOPC的反应堆棒位信息监测技术研究%Research on Reactor Control Rod Position Indication Information Monitoring Technology Based on SOPC

    Institute of Scientific and Technical Information of China (English)

    郑晓; 蔡晨; 孙宇; 刘明星

    2013-01-01

    A new monitoring technology for control rod position is developed by utilizing the FPGA (Field-Programmable Gate Array) platform and using the SOPC (System On Programmable Chip) technology.In this SOPC system,Nios Ⅱ CPU,VGA (Video Graphics Array) display controller and CAN (Controller Area Network) bus controller are integrated in one FPGA chip.Thus the SOPC hardware platform with comprehensive functionality is constructed.Based on this SOPC platform,the real time data of control rod position indication system can be vividly displayed on the LCD and stored in the external nonvolatile RAM as history records.Therefore,the operator can obtain the overall operation status of control rod position indication system quickly and conveniently.The developed prototype has proved the feasibility of this technology.%运用可编程片上系统(SOPC)技术,以现场可编程门阵列(FPGA)为数字平台,研究一种反应堆棒位信息监测技术.该监测技术将Nios Ⅱ处理器、视频图形阵列(VGA)显示控制器、控制器局域网络(CAN)总线控制器等集成在一片FPGA芯片中,构建完成一个具有丰富功能的SOPC硬件平台.采用该硬件平台,可将棒位系统的运行状态信息实时、直观地进行数字化显示,同时以日志的形式存储在外部存储设备中,能够全方位地监测棒位系统的运行状态,使操纵人员能更方便、快捷地掌握整个棒位系统的运行情况.研制完成的原理样机验证了该技术的可行性.

  11. H82B钢盘条冬季控冷工艺%Controlled cooling process of H82B steel wire rod in winter

    Institute of Scientific and Technical Information of China (English)

    王雷; 麻晗; 峰公雄

    2011-01-01

    冬季低温脆断是高碳钢盘条的普遍问题,对盘条及下游客户拉丝生产造成了严重影响。使用传统斯太尔摩控冷工艺生产的H82B钢盘条常常因心部马氏体、网状渗碳体超标及塑性不达标造成判次,这种现象在冬季尤为明显。通过改进斯太尔摩线控冷工艺等措施,明显改善了盘条的金相组织和力学性能,缩短了冬季自然时效时间,减少了冬季脆断现象。最后阐述了优化控冷工艺的原理。%Winter brittleness is a common problem for high carbon wire rods,which always leads to breakage during the cold drawing process.For H82B steel wire rod,the brittleness is even worse due to center martensite,cementite network and deficient plasticity caused by faster cooling in winter.By improving the Stelmor cooling condition,the microstructure and mechanical properties were improved,the winter natural aging time was shortened,and the winter brittleness was overcome.Process route to minimize the brittleness was designed with discussion on the mechanism involved.

  12. Topological mixing with ghost rods

    Science.gov (United States)

    Gouillart, Emmanuelle; Thiffeault, Jean-Luc; Finn, Matthew D.

    2006-03-01

    Topological chaos relies on the periodic motion of obstacles in a two-dimensional flow in order to form nontrivial braids. This motion generates exponential stretching of material lines, and hence efficient mixing. Boyland, Aref, and Stremler [J. Fluid Mech. 403, 277 (2000)] have studied a specific periodic motion of rods that exhibits topological chaos in a viscous fluid. We show that it is possible to extend their work to cases where the motion of the stirring rods is topologically trivial by considering the dynamics of special periodic points that we call “ghost rods”, because they play a similar role to stirring rods. The ghost rods framework provides a new technique for quantifying chaos and gives insight into the mechanisms that produce chaos and mixing. Numerical simulations for Stokes flow support our results.

  13. Failure Investigation of an Intra-Manifold Explosion in a Horizontally-Mounted 870 lbf Reaction Control Thruster

    Science.gov (United States)

    Durning, Joseph G., III; Westover, Shayne C.; Cone, Darren M.

    2011-01-01

    In June 2010, an 870 lbf Space Shuttle Orbiter Reaction Control System Primary Thruster experienced an unintended shutdown during a test being performed at the NASA White Sands Test Facility. Subsequent removal and inspection of the thruster revealed permanent deformation and misalignment of the thruster valve mounting plate. Destructive evaluation determined that after three nominal firing sequences, the thruster had experienced an energetic event within the fuel (monomethylhydrazine) manifold at the start of the fourth firing sequence. The current understanding of the phenomenon of intra-manifold explosions in hypergolic bipropellant thrusters is documented in literature where it is colloquially referred to as a ZOT. The typical ZOT scenario involves operation of a thruster in a gravitational field with environmental pressures above the triple point pressure of the propellants. Post-firing, when the thruster valves are commanded closed, there remains a residual quantity of propellant in both the fuel and oxidizer (nitrogen tetroxide) injector manifolds known as the "dribble volume". In an ambient ground test configuration, these propellant volumes will drain from the injector manifolds but are impeded by the local atmospheric pressure. The evacuation of propellants from the thruster injector manifolds relies on the fluids vapor pressure to expel the liquid. The higher vapor pressure oxidizer will evacuate from the manifold before the lower vapor pressure fuel. The localized cooling resulting from the oxidizer boiling during manifold draining can result in fuel vapor migration and condensation in the oxidizer passage. The liquid fuel will then react with the oxidizer that enters the manifold during the next firing and may produce a localized high pressure reaction or explosion within the confines of the oxidizer injector manifold. The typical ZOT scenario was considered during this failure investigation, but was ultimately ruled out as a cause of the explosion

  14. Horizontal drilling in Ontario

    Energy Technology Data Exchange (ETDEWEB)

    Sidey, P.; Precul, L. [Sproule Associates Ltd., Calgary, AB (Canada)

    2002-07-01

    A review of oil and gas production in Ontario was presented with particular reference to drilling activity between 1987 to mid 2002 when 1450 vertical wells were drilled, of which 1100 were for petroleum production and the remainder were for gas storage, observation wells, private gas wells and stratigraphic tests. Of the 1100 vertical wells drilled for petroleum production, 40 per cent became gas wells, 16 per cent became oil wells, 4 per cent became oil and gas wells, and 40 per cent were dry. During the same time period, 133 horizontal wells were also drilled, mostly for petroleum. The most active operator was Talisman Energy, which drilled 101 of the 133 horizontal wells. The remainder were drilled by 12 other companies. Of the horizontal wells, 64 per cent became oil wells, 19 per cent became gas wells, and 17 per cent were dry. This presentation included graphs depicting which oil and gas pools saw vertical or horizontal drilling during the designated time period, and explained how the wells were classified. Both horizontal and vertical well targets were illustrated. Particular reference was made to Talisman Energy's Lake Erie Drilling program which revealed that horizontal wells have an initial production rate that is 5 times that expected from vertical wells. The Hillman Pool case study revealed that the initial rate of the average horizontal well is less than half that of the average vertical well. Horizontal drilling in the Lake Erie Morpeth Gas pool has also been a commercial success. This paper demonstrates that operators have maintained Ontario's oil and gas production at high levels. In 1997 widespread horizontal drilling began taking place in Ontario, and since then, approximately 30 per cent of the wells drilled in the province have been horizontal. 16 figs.

  15. Composites reinforcement by rods: a SAS study

    Energy Technology Data Exchange (ETDEWEB)

    Urban, V. [ESRF, BP220, 38043 Grenoble Cedex (France); Botti, A.; Pyckhout-Hintzen, W.; Richter, D. [IFF-Forschungszentrum Juelich, 52425 Juelich (Germany); Straube, E. [University of Halle, FB Physik, 06099 Halle (Germany)

    2002-07-01

    The mechanical properties of composites are governed by size, shape and dispersion degree of so-called reinforcing particles. Polymeric fillers based on thermodynamically driven microphase separation of block copolymers offer the opportunity to study a model system of controlled rod-like filler particles. We chose a triblock copolymer (PBPSPB) and carried out SAS measurements with both X-rays and neutrons, in order to characterize separately the hard phase and the cross-linked PB matrix. The properties of the material depend strongly on the way that stress is carried and transferred between the soft matrix and the hard fibers. The failure of the strain-amplification concept and the change of topological contributions to the free energy and scattering factor have to be addressed. In this respect the composite shows a similarity to a two-network system, i.e. interpenetrating rubber and rod-like filler networks. (orig.)

  16. Composites reinforcement by rods a SAS study

    CERN Document Server

    Urban, V; Pyckhout-Hintzen, W; Richter, D; Straube, E

    2002-01-01

    The mechanical properties of composites are governed by size, shape and dispersion degree of so-called reinforcing particles. Polymeric fillers based on thermodynamically driven microphase separation of block copolymers offer the opportunity to study a model system of controlled rod-like filler particles. We chose a triblock copolymer (PBPSPB) and carried out SAS measurements with both X-rays and neutrons, in order to characterize separately the hard phase and the cross-linked PB matrix. The properties of the material depend strongly on the way that stress is carried and transferred between the soft matrix and the hard fibers. The failure of the strain-amplification concept and the change of topological contributions to the free energy and scattering factor have to be addressed. In this respect the composite shows a similarity to a two-network system, i.e. interpenetrating rubber and rod-like filler networks. (orig.)

  17. Risk Factors for tuberculosis among human immunodeficiency virus-infected persons. A case-control study in Belo Horizonte, Minas Gerais, Brazil (1985-1996

    Directory of Open Access Journals (Sweden)

    Antonio Carlos de Castro Toledo Jr.

    2000-08-01

    Full Text Available The objective of this study was to identify tuberculosis risk factors and possible surrogate markers among human immunodeficiency virus (HIV-infected persons. A retrospective case-control study was carried out at the HIV outpatient clinic of the Universidade Federal de Minas Gerais in Belo Horizonte. We reviewed the demographic, social-economical and medical data of 477 HIV-infected individuals evaluated from 1985 to 1996. The variables were submitted to an univariate and stratified analysis. Aids related complex (ARC, past history of pneumonia, past history of hospitalization, CD4 count and no antiretroviral use were identified as possible effect modifiers and confounding variables, and were submitted to logistic regression analysis by the stepwise method. ARC had an odds ratio (OR of 3.5 (CI 95% - 1.2-10.8 for tuberculosis development. Past history of pneumonia (OR 1.7 - CI 95% 0.6-5.2 and the CD4 count (OR 0.4 - CI 0.2-1.2 had no statistical significance. These results show that ARC is an important clinical surrogate for tuberculosis in HIV-infected patients. Despite the need of confirmation in future studies, these results suggest that the ideal moment for tuberculosis chemoprophylaxis could be previous to the introduction of antiretroviral treatment or even just after the diagnosis of HIV infection.

  18. Electrostatic Deformation of Liquid Surfaces by a Charged Rod and a Van De Graaff Generator

    Science.gov (United States)

    Slisko, Josip; García-Molina, Rafael; Abril, Isabel

    2014-01-01

    Authors of physics textbooks frequently use the deflection of a thin, vertically falling water jet by a charged balloon, comb, or rod as a visually appealing and conceptually relevant example of electrostatic attraction. Nevertheless, no attempts are made to explore whether these charged bodies could cause visible deformation of a horizontal water…

  19. Selective suppression of rod signal transmission by cobalt ions of low levels in carp retina

    Institute of Scientific and Technical Information of China (English)

    袁澧涟; 杨雄里

    1997-01-01

    Selective suppression of rod signal transmission by cobalt ions was reported in carp retina. Using 10 μmol/L Co2+ , rod-driven horizontal cells were hyperpolarized and light responses were completely suppressed in super-fused, isolated retina, while cone-driven horizontal cells were almost unaffected. Similarly, scotopic electroretino-graphic b-wave was suppressed by 10 μmol/L Co2+ , while the photopic b-wave remained unaffected. Furthermore, the glutamate-isolated receptor potential (PIII) was not altered by low Co2+ under dark-adapted conditions. Other di-valent ions with high affinity to calcium channels, such as cadmium and manganese ions, did not show similar suppres-sive effect on the rod horizontal cells. When rod horizontal cells were hyperpolarized by 10 μmol/L Co2+ , the use of 3 mmol/L glutamate caused a significant depolarization of the cells, indicating that Co2+ application did not impair the ability of these cells to respond to glutamate. On the other hand, application of 200 μmol/L ?

  20. Estudio del horizonte local

    OpenAIRE

    Ros Ferré, Rosa Maria

    2009-01-01

    El estudio del horizonte es fundamental para poder facilitar las primeras observaciones de los alumnos en un centro educativo. Un simple modelo, que debe realizarse para cada centro, nos permite facilitar el estudio y la comprensión de los primeros rudimentos astronómicos. El modelo construido se presenta a su vez como un sencillo modelo de reloj ecuatorial y a partir de él se pueden construir otros modelos (horizontal y vertical).

  1. The Third ATLAS ROD Workshop

    CERN Multimedia

    Poggioli, L.

    A new-style Workshop After two successful ATLAS ROD Workshops dedicated to the ROD hardware and held at the Geneva University in 1998 and in 2000, a new style Workshop took place at LAPP in Annecy on November 14-15, 2002. This time the Workshop was fully dedicated to the ROD-TDAQ integration and software in view of the near future integration activities of the final RODs for the detector assembly and commissioning. More precisely, the aim of this workshop was to get from the sub-detectors the parameters needed for T-DAQ, as well as status and plans from ROD builders. On the other hand, what was decided and assumed had to be stated (like EB decisions and URDs), and also support plans. The Workshop gathered about 70 participants from all ATLAS sub-detectors and the T-DAQ community. The quite dense agenda allowed nevertheless for many lively discussions, and for a dinner in the old town of Annecy. The Sessions The Workshop was organized in five main sessions: Assumptions and recommendations Sub-de...

  2. Study on Control System Software ofTwisted Rod Spring' s Heat Treatment%扭杆弹簧热处理控制系统软件研究

    Institute of Scientific and Technical Information of China (English)

    杨国清; 杨柳

    2000-01-01

    With regard to the great inertia of powerful resistancestove and the affection of stove temperature gradient variety on theheat treatment of twisted rod, this paper exposes the mathematicsmodel, PI adjustment, programming method and temperature com-pensation of the high precision temperature control system and givesthe related frame drawings.%针对大功率电阻炉热惯性大的特点以及炉温度梯度对扭杆热处理的影响,论述了高精度温控系统的数学模型,PI调节及编程方法,温度补偿等内容,并给出了相应的框图。

  3. Results of Post Irradiation Examinations of VVER Leaky Rods

    Energy Technology Data Exchange (ETDEWEB)

    Markov, D.; Perepelkin, S.; Polenok, V.; Zhitelev, V.; Mayorshina, G. [Head of Fuel Research Department, JSC ' SSC RIAR' , 433510, Dimitrovgrad-10, Ulyanovsk region (Russian Federation)

    2009-06-15

    The most important requirement imposed on fuel elements is to maintain integrity of fuel rod claddings under operation, storage and transportation, since it is directly related to the operational safety. However, failed rod claddings are sometimes observed under reactor operation. Identification and unloading of fuel assemblies with leaky rods from VVER is available only at the time of planned preventive maintenance. An unscheduled reactor shutdown due to the excess of coolant activity limit as well as a preterm unloading of the fuel assembly cause economic damage to nuclear plant. Therefore, models and calculation codes were developed to forecast coolant contamination and failed fuel rod behavior. Criteria based on calculations were set to determine the admissible number of the failed rods in core and the opportunity to continue the reactor operation or pre-term unloading of the fuel assembly with the failed rods. Nevertheless, to prevent the fuel rod failure (for unfailing operation) it is necessary to reveal disadvantages of the design, fabrication method and fuel operation conditions, and to eliminate defects. The most complete and significant information about spent fuel assemblies may be received following the post irradiation material examinations. In order to reveal failure origins and mechanism of changes in VVER fuel and failed rod cladding condition depending on the operation, the examinations of 12 VVER-1000 fuel assemblies and 3 VVER-440 fuel assemblies, operated under normal conditions up to the fuel burnup 13..47 MWd/kgU were carried out. To evaluate the rod cladding condition, reveal defects and determine their parameters, the ultrasonic control of cladding integrity, surface visual inspection, eddy current defectoscopy, measurement of geometrical parameters were applied. In separate cases we used the metallography, measured the hydrogen percentage and carried out the mechanical tests of o-ring samples. The pellet condition was evaluated in

  4. Topological Optimization of Rod Mixers

    Science.gov (United States)

    Finn, Matthew D.; Thiffeault, Jean-Luc

    2006-11-01

    Stirring of fluid with moving rods is necessary in many practical applications to achieve homogeneity. These rods are topological obstacles that force stretching of fluid elements. The resulting stretching and folding is commonly observed as filaments and striations, and is a precursor to mixing. In a space-time diagram, the trajectories of the rods form a braid [1], and the properties of this braid impose a minimal complexity in the flow. We discuss how optimal mixing protocols can be obtained by a judicious choice of braid, and how these protocols can be implemented using simple gearing [2].[12pt] [1] P. L. Boyland, H. Aref, and M. A. Stremler, JFM 403, 277 (2000).[8pt] [2] J.-L. Thiffeault and M. D. Finn, http://arxiv.org/nlin/0603003

  5. RETINA-specific expression of Kcnv2 is controlled by cone-rod homeobox (Crx) and neural retina leucine zipper (Nrl).

    Science.gov (United States)

    Aslanidis, Alexander; Karlstetter, Marcus; Walczak, Yana; Jägle, Herbert; Langmann, Thomas

    2014-01-01

    Cone dystrophy with supernormal rod response (CDSRR) is an autosomal recessive disorder that leads to progressive retinal degeneration with a distinct electroretinogram (ERG) phenotype. CDSRR patients show reduced sensitivity to dim light, augmented response to suprathreshold light and reduced response to flicker. The disorder is caused by mutations in the KCNV2 gene, which encodes the Kv11.1 subunit of a voltage-gated potassium channel. Here, we studied the retina-specific expression and cis-regulatory activity of the murine Kcnv2 gene using electroporation of explanted retinas. Using qRT-PCR profiling of early postnatal retinas, we showed that Kcnv2 expression increased towards P14, which marks the beginning of visual activity in mice. In vivo electroporation of GFP-Kcnv2 expressing plasmids revealed that Kv11.1 localizes to the inner segment membranes of adult P21 photoreceptors. Using bioinformatic prediction and chromatin immunoprecipitation (ChIP), we identified two Crx binding sites (CBS) and one Nrl binding site (NBS) in the Kcnv2 promoter. Reporter electroporation of the wild type promoter region induced strong DsRed expression, indicating high regulatory activity, whereas shRNA-mediated knockdown of Crx and Nrl resulted in reduced Kcnv2 promoter activity and low endogenous Kcnv2 mRNA expression in the retina. Site-directed mutagenesis of the CBS and NBS demonstrated that CBS2 is crucial for Kcnv2 promoter activity. We conclude that nucleotide changes in evolutionary conserved CBS could impact retina-specific expression levels of Kcnv2.

  6. KE-Rod Initial Velocity of Hollow Cylindrical Charge

    Directory of Open Access Journals (Sweden)

    Wang Shushan

    2011-01-01

    Full Text Available KE-rod warhead is a kind of forward interception warhead. To control the KE-rods to disperse uniformly, the hollow cylindrical charge is applied. Initial velocity is crucial to KE-rods distribution and the coordination between the fuze and the warhead. Therefore, based on the classical Gurney formula of cylindrical charge and tabulate interlayer charge, a mathematical model for calculating the KE-rod initial velocity of hollow cylindrical charge has been deduced based on certain assumptions, of which the basis theory is energy and momentum conservation. To validate this deduced equation, high-speed photography and metal-pass target experimental methods were applied simultaneously to test the initial velocity of designed KE-rod warhead. Testing results clearly indicate that the calculated results of the derived mathematical model coincides with the experimental  results, and with the increase in hollow radius, the calculated results become much closer to the experimental results. But the calculated results of classical Gurney formula are far above the experimental results, and the relative error increases with increase in the hollow diameter. The derived mathematical model with satisfactory accuracy is applicable to calculate the KE-rod initial velocity of hollow cylindrical charge in engineering applications.Defence Science Journal, 2011, 61(1, pp.25-29, DOI:http://dx.doi.org/10.14429/dsj.61.72

  7. Method of targeted delivery of laser beam to isolated retinal rods by fiber optics.

    Science.gov (United States)

    Sim, Nigel; Bessarab, Dmitri; Jones, C Michael; Krivitsky, Leonid

    2011-11-01

    A method of controllable light delivery to retinal rod cells using an optical fiber is described. Photo-induced current of the living rod cells was measured with the suction electrode technique. The approach was tested with measurements relating the spatial distribution of the light intensity to photo-induced current. In addition, the ion current responses of rod cells to polarized light at two different orientation geometries of the cells were studied.

  8. Method of targeted delivery of laser beam to isolated retinal rods by fiber optics

    CERN Document Server

    Sim, Nigel; Jones, C Michael; Krivitsky, Leonid

    2013-01-01

    A method of controllable light delivery to retinal rod cells using an optical fiber is described. Photo-induced current of the living rod cells was measured with the suction electrode technique. The approach was tested with measurements relating the spatial distribution of the light intensity to photo-induced current. In addition, the ion current responses of rod cells to polarized light at two different orientation geometries of the cells were studied.

  9. Sliding Downhill Horizontally

    Science.gov (United States)

    Zurcher, Ulrich

    2005-04-01

    We study the motion of object sliding on a rough incline plane. The coefficient of kinetic friction between the surface and the object is such that the magnitude of the gravitational force along the incline F is equal to the magnitude of the kinetic friction S. If the initial velocity of the object is along the incline, the object slides down the incline with constant velocity. We study the case when the object in launched in horizontal direction. We derive exact expressions for the terminal speed of the object and the maximum horizontal displacement of the object.

  10. Dynamic rod worth simulation study for a sodium-cooled TRU burner

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Ji; Ha, Pham Nhu Viet, E-mail: phamha@kaeri.re.kr; Lee, Min Jae; Kang, Chang Mu

    2015-12-15

    Highlights: • Dynamic rod worth calculation methodology for a sodium-cooled TRU burner was developed. • The spatial weighting functions were relatively insensitive to control rods position. • The simulated pseudo detector response agreed well with the calculated core power. • The simulated dynamic rod worths compared well against the simulated static values. • Impact of individual detector on the simulated dynamic worth was evaluated. - Abstract: This paper presents a preliminary dynamic rod worth simulation study for a TRU burner core mockup of the PGSFR (Korean Prototype Gen-IV Sodium-cooled Fast Reactor) named BFS-76-1A so as to establish a calculation methodology for evaluating the rod worth of the PGSFR. The simulation method was mainly based on a three-dimensional multi-group nodal diffusion transient code for fast reactors in which the rod drop simulation for the BFS-76-1A was performed and all the fuel assemblies were taken into account for the detector response calculation. Then the dynamic rod worths were inferred from the simulated detector responses using an inverse point kinetics model and compared against the simulated static worths. The results show good agreement between the simulated pseudo detector response and the calculated core power as well as between the simulated dynamic and static rod worths, and thus indicate that the dynamic rod worth simulation method developed in this work can be applied to the rod worth estimation and validation for the PGSFR.

  11. Solid-state-laser-rod holder

    Science.gov (United States)

    Gettemy, D.J.; Barnes, N.P.; Griggs, J.E.

    1981-08-11

    The disclosure relates to a solid state laser rod holder comprising Invar, copper tubing, and epoxy joints. Materials and coefficients of expansion of the components of the holder combine with the rod to produce a joint which will give before the rod itself will. The rod may be lased at about 70 to 80/sup 0/K and returned from such a temperature to room temperature repeatedly without its or the holder's destruction.

  12. 21 CFR 876.4270 - Colostomy rod.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Colostomy rod. 876.4270 Section 876.4270 Food and... GASTROENTEROLOGY-UROLOGY DEVICES Surgical Devices § 876.4270 Colostomy rod. (a) Identification. A colostomy rod is a device used during the loop colostomy procedure. A loop of colon is surgically brought out...

  13. Solitary waves on nonlinear elastic rods. II

    DEFF Research Database (Denmark)

    Sørensen, Mads Peter; Christiansen, Peter Leth; Lomdahl, P. S.

    1987-01-01

    In continuation of an earlier study of propagation of solitary waves on nonlinear elastic rods, numerical investigations of blowup, reflection, and fission at continuous and discontinuous variation of the cross section for the rod and reflection at the end of the rod are presented. The results...

  14. Phase behavior of colloidal silica rods

    NARCIS (Netherlands)

    Kuijk, A.; Byelov, D.; Petukhov, A.V.; van Blaaderen, A.; Imhof, A.

    2012-01-01

    Recently, a novel colloidal hard-rod-like model system was developed which consists of silica rods [Kuijk et al., JACS, 2011, 133, 2346]. Here, we present a study of the phase behavior of these rods, for aspect ratios ranging from 3.7 to 8.0. By combining real-space confocal laser scanning microscop

  15. Numerical study of solenoid value head temperature field of control rod%控制棒电磁阀阀头温度场特性数值研究

    Institute of Scientific and Technical Information of China (English)

    殷园; 刘潜峰; 薄涵亮; 王露

    2014-01-01

    A hydraulic drive control rod is a new control technology of nuclear reactor. The direct action solenoid valve is a key component of this technology. The performance of the direct action solenoid valve directly affects the stable operation of control rod hydraulic drive system. The temperature field of the head of the direct action solenoid valve with various currents was studied using the ANSYS software. The result shows that the temperature of the head of the solenoid valve increases as the current increasing. The temperature of the middle head is higher than that of the edge of the head and the highest temperature of the middle head is under the limiting temperature. The tempera-ture of the inner wall of the head is higher than that of the exterior wall. The results calculated by ANSYS were veri-fied with the experimental testing.%水压驱动控制棒是一种全新的核反应堆控制技术,直动电磁阀是其关键部件。电磁阀的性能直接影响控制棒水压驱动系统的稳定运行。运用ANSYS电磁场分析软件研究直动电磁阀阀头在不同输入电流的工况下温度场的特性。结果表明,当电流增大时,阀头温度升高;阀头中心温度高于边缘温度,中心最高温度低于阀头破坏温度;内壁温度高于外壁温度,其中内壁中心温度为最高壁温;计算结果与实验数据的对比说明,该数值计算分析有较高的准确性。

  16. Process development and fabrication for sphere-pac fuel rods. [PWR; BWR

    Energy Technology Data Exchange (ETDEWEB)

    Welty, R.K.; Campbell, M.H.

    1981-06-01

    Uranium fuel rods containing sphere-pac fuel have been fabricated for in-reactor tests and demonstrations. A process for the development, qualification, and fabrication of acceptable sphere-pac fuel rods is described. Special equipment to control fuel contamination with moisture or air and the equipment layout needed for rod fabrication is described and tests for assuring the uniformity of the fuel column are discussed. Fuel retainers required for sphere-pac fuel column stability and instrumentation to measure fuel column smear density are described. Results of sphere-pac fuel rod fabrication campaigns are reviewed and recommended improvements for high throughput production are noted.

  17. Horizontal Connection and Horizontal Mean Curvature in Carnot Groups

    Institute of Scientific and Technical Information of China (English)

    Kang Hai TAN; Xiao Ping YANG

    2006-01-01

    In this paper we give a geometric interpretation of the notion of the horizontal mean curvature which is introduced by Danielli-Garofalo-Nhieu and Pauls who recently introduced sub-Riemannian minimal surfaces in Carnot groups. This will be done by introducing a natural nonholonomic connection which is the restriction (projection) of the natural Riemannian connection on the horizontal bundle. For this nonholonomic connection and (intrinsic) regular hypersurfaces we introduce the notions of the horizontal second fundamental form and the horizontal shape operator. It turns out that the horizontal mean curvature is the trace of the horizontal shape operator.

  18. Exploiting rod technology. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-06-01

    ROD development was proceeding apace until recent budgetary decisions caused funding support for ROD development to be drastically reduced. The funding which was originally provided by DARPA and the Balanced Technology Initiative (BTI) Office has been cut back to zero from $800K. To determine the aeroballistic coefficients of a candidate dart, ARDEC is currently supporting development out of its own 6.2 funds at about $100K. ARDEC has made slow progress toward achieving this end because of failures in the original dart during testing. It appears that the next dart design to be tested will diverge from the original concept visualized by DARPA and Science and Technology Associates (STA). STA, the design engineer, takes exception to these changes on the basis of inappropriate test conditions and insufficient testing. At this time, the full resolution of this issue will be difficult because of the current management structure, which separates the developer (ARDEC) from the designer (STA).

  19. Horizontally mounted solar collector

    Science.gov (United States)

    Black, D. H. (Inventor)

    1979-01-01

    Solar energy is collected by using a vertical deflector assembly, a stationary reflector and a horizontally mounted solar collector. The deflector assembly contains a plurality of vanes which change the direction of the solar energy to the vertical, while constantly keeping the same side of the deflector facing the sun. The vertical rays are then reflected off the stationary reflector and are then absorbed by the collector.

  20. Experimental Study on Surrogate Nuclear Fuel Rods under Reversed Cyclic Bending

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Hong [ORNL; Wang, Jy-An John [ORNL

    2017-01-01

    The mechanical behavior of spent nuclear fuel (SNF) rods under reversed cyclic bending or bending fatigue must be understood to evaluate their vibration integrity in a transportation environment. This is especially important for high-burnup fuels (>45 GWd/MTU), which have the potential for increased structural damage. It has been demonstrated that the bending fatigue of SNF rods can be effectively studied using surrogate rods. In this investigation, surrogate rods made of stainless steel (SS) 304 cladding and aluminum oxide pellets were tested under load or moment control at a variety of amplitude levels at 5 Hz using the Cyclic Integrated Reversible-Bending Fatigue Tester developed at Oak Ridge National Laboratory. The behavior of the rods was further characterized using flexural rigidity and hysteresis data, and fractography was performed on the failed rods. The proposed surrogate rods captured many of the characteristics of deformation and failure mode observed in SNF, including the linear-to-nonlinear deformation transition and large residual curvature in static tests, PPI and PCMI failure mechanisms, and large variation in the initial structural condition. Rod degradation was measured and characterized by measuring the flexural rigidity; the degradation of the rigidity depended on both the moment amplitude applied and the initial structural condition of the rods. It was also shown that a cracking initiation site can be located on the internal surface or the external surface of cladding. Finally, fatigue damage to the bending rods can be described in terms of flexural rigidity, and the fatigue life of rods can be predicted once damage model parameters are properly evaluated. The developed experimental approach, test protocol, and analysis method can be used to study the vibration integrity of SNF rods in the future.

  1. Cognitive set influences on Witkin's Rod-and-Frame Test.

    Science.gov (United States)

    Reinking, R H

    1977-04-01

    Witkin's field-dependence theory is embroiled in conflict as research shows its primary assessment method, the Rod-and-frame Test, is influenced by situational events. This study explored the impact of an additional situational variable, locus of problem-solving data search, a cognitive set modified from Rotter's (1966) work. Two experimental groups of hospitalized alcoholics received standard Witkin instructions plus instructions emphasizing either an internal or external search for problem-solving cues. A control group received only Witkin's instructions. Aanlysis of variance showed the special instructions affected rod-and-frame scores in the predicted directions. The results were interpreted as indicating a need for a multi-factor approach to analyzing the complex relationships of the Rod-and-frame Test.

  2. Semi-analytical method for calculating aeroelastic effect of profiled rod flying at high velocity

    Directory of Open Access Journals (Sweden)

    Hui-jun Ning

    2015-03-01

    Full Text Available The key technique of a kinetic energy rod (KER warhead is to control the flight attitude of rods. The rods are usually designed to different shapes. A new conceptual KER named profiled rod which has large L/D ratio is described in this paper. The elastic dynamic equations of this profiled rod flying at high velocity after detonation are set up on the basis of Euler-Bernoulli beam, and the aeroelastic deformation of profiled rod is calculated by semi-analytical method for calculating the vibration characteristics of variable cross-section beam. In addition, the aeroelastic deformation of the undeformed profiled rod and the aeroelastic deformation of deformed profiled rod which is caused by the detonation of explosive are simulated by computational fluid dynamic and finite element method (CFD/FEM, respectively. A satisfactory agreement of these two methods is obtained by the comparison of two methods. The results show that the semi-analytical method for calculating the vibration characteristics of variable cross-section beam is applied to analyze the aeroelastic deformation of profiled rod flying at high velocity.

  3. Site controlled red-yellow-green light emitting InGaN quantum discs on nano-tipped GaN rods

    Science.gov (United States)

    Conroy, M.; Li, H.; Kusch, G.; Zhao, C.; Ooi, B.; Edwards, P. R.; Martin, R. W.; Holmes, J. D.; Parbrook, P. J.

    2016-05-01

    We report a method of growing site controlled InGaN multiple quantum discs (QDs) at uniform wafer scale on coalescence free ultra-high density (>80%) nanorod templates by metal organic chemical vapour deposition (MOCVD). The dislocation and coalescence free nature of the GaN space filling nanorod arrays eliminates the well-known emission problems seen in InGaN based visible light sources that these types of crystallographic defects cause. Correlative scanning transmission electron microscopy (STEM), energy-dispersive X-ray (EDX) mapping and cathodoluminescence (CL) hyperspectral imaging illustrates the controlled site selection of the red, yellow and green (RYG) emission at these nano tips. This article reveals that the nanorod tips' broad emission in the RYG visible range is in fact achieved by manipulating the InGaN QD's confinement dimensions, rather than significantly increasing the In%. This article details the easily controlled method of manipulating the QDs dimensions producing high crystal quality InGaN without complicated growth conditions needed for strain relaxation and alloy compositional changes seen for bulk planar GaN templates.We report a method of growing site controlled InGaN multiple quantum discs (QDs) at uniform wafer scale on coalescence free ultra-high density (>80%) nanorod templates by metal organic chemical vapour deposition (MOCVD). The dislocation and coalescence free nature of the GaN space filling nanorod arrays eliminates the well-known emission problems seen in InGaN based visible light sources that these types of crystallographic defects cause. Correlative scanning transmission electron microscopy (STEM), energy-dispersive X-ray (EDX) mapping and cathodoluminescence (CL) hyperspectral imaging illustrates the controlled site selection of the red, yellow and green (RYG) emission at these nano tips. This article reveals that the nanorod tips' broad emission in the RYG visible range is in fact achieved by manipulating the InGaN QD

  4. Nuclear Fuel Test Rod Fabrication for Data Acquisition Test

    Energy Technology Data Exchange (ETDEWEB)

    Joung, Chang-Young; Hong, Jin-Tae; Kim, Ka-Hye; Huh, Sung-Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    A nuclear fuel test rod must be fabricated with precise welding and assembly technologies, and confirmed for their soundness. Recently, we have developed various kinds of processing systems such as an orbital TIG welding system, a fiber laser welding system, an automated drilling system and a helium leak analyzer, which are able to fabricate the nuclear fuel test rods and rigs, and keep inspection systems to confirm the soundness of the nuclear fuel test rods and rids. The orbital TIG welding system can be used with two kinds of welding methods. One can perform the round welding for end-caps of a nuclear fuel test rod by an orbital head mounted in a low-pressure chamber. The other can do spot welding for a pin-hole of a nuclear fuel test rod in a high-pressure chamber to fill up helium gas of high pressure. The fiber laser welding system can weld cylindrical and 3 axis samples such as parts of a nuclear fuel test rod and instrumentation sensors which is moved by an index chuck and a 3 axis (X, Y, Z) servo stage controlled by the CNC program. To measure the real-time temperature change at the center of the nuclear fuel during the irradiation test, a thermocouple should be instrumented at that position. Therefore, a hole needs to be made at the center of fuel pellet to instrument the thermocouple. An automated drilling system can drill a fine hole into a fuel pellet without changing tools or breaking the work-piece. The helium leak analyzer (ASM-380 model of DEIXEN Co.) can check the leak of the nuclear fuel test rod filled with helium gas. This paper describes not only the assembly and fabrication methods used by the process systems, but also the results of the data acquisition test for the nuclear fuel test rod. A nuclear fuel test rod for the data acquisition test was fabricated using the welding and assembling echnologies acquired from previous tests.

  5. Site controlled Red-Yellow-Green light emitting InGaN Quantum Discs on nano-tipped GaN rods

    KAUST Repository

    Conroy, Michele Ann

    2016-03-10

    We report a method of growing site controlled InGaN multiple quantum discs (QDs) at uniform wafer scale on coalescence free ultra-high density (>80%) nanorod templates by metal organic chemical vapour deposition (MOCVD). The dislocation and coalescence free nature of the GaN space filling nanorod arrays eliminates the well-known emission problems seen in InGaN based visible light sources that these types of crystallographic defects cause. Correlative scanning transmission electron microscopy (STEM), energy-dispersive x-ray (EDX) mapping and cathodoluminescence (CL) hyperspectral imaging illustrates the controlled site selection of the red, yellow and green (RYG) emission at these nano tips. This article reveals that the nanorod tips’ broad emission in the RYG visible range is in fact achieved by manipulating the InGaN QD’s confinement dimensions, rather than significantly increasing the In%. This article details the easily controlled method of manipulating the QDs dimensions producing high crystal quality InGaN without complicated growth conditions needed for strain relaxation and alloy compositional changes seen for bulk planar GaN templates.

  6. Horizontal drilling activity in Manitoba

    Energy Technology Data Exchange (ETDEWEB)

    Fox, J.

    1997-04-01

    An update of horizontal well drilling in Manitoba was provided. Manitoba`s productive formations are: (1) the Bakken Formation, (2) the Lodgepole Formation, (3) the Mission Canyon Formation, (4) the Amaranth Formation, and (5) the Melita Formation. A total of 28 exploratory wells and 29 development wells, including 11 horizontal wells were drilled in 1996. The 11 horizontal wells accounted for 30 per cent of the drilling meterage. The leading drillers for horizontal wells in Manitoba are Tundra Oil and Gas, Chevron, Anderson and HCO. Production from horizontal wells in 1996 totaled 310 cubic meter per day. To date, no horizontal wells have been drilled in the Bakken Formation. The least successful horizontal well application has been in the Lodgepole Formation. A summary of horizontal well production was provided for each Formation. 4 tabs., 10 figs.

  7. Electric Fuel Rod Simulator Fabrication at ORNL

    Science.gov (United States)

    Ott, Larry J.; McCulloch, Reg

    2004-02-01

    Commercial vendors could not supply the high-quality, highly instrumented electric fuel rod simulators (FRS) required for large thermal-hydraulic safety-oriented experiments at the Oak Ridge National Laboratory (ORNL) in the 1970s and early 1980s. Staff at ORNL designed, developed, and manufactured the simulators utilized in these safety experiments. Important FRS design requirements include (1) materials of construction, (2) test power requirements and availability, (3) experimental test objectives, (4) supporting thermal analyses, and (5) extensive quality control throughout all phases of FRS fabrication. This paper will present an overview of these requirements (design, analytics, and quality control) as practiced at ORNL to produce a durable high-quality FRS.

  8. Copper-ion-assisted self-assembly of silicate clays in rod- and disklike morphologies.

    Science.gov (United States)

    Tsai, Wei-Cheng; Lin, Jiang-Jen

    2010-06-15

    Self-assembled rodlike (0.3-2.5 microm in diameter and 5.3-31 microm in length) and disklike microstructures (1.8-10.6 microm in width and 0.1-1.0 microm in thickness) are uniquely present in amorphous clay aggregates. Clay units were prepared by intercalation of Na(+)-montmorillonite (Na(+)-MMT) with copper ions (Cu(2+)) and poly(oxypropylene)-amine salt (POP) in simultaneous or stepwise ionic exchange reactions. Differences in process control during incorporation of Cu(2+) and hydrophobic POP greatly affected the layer structure of the clay units (d spacing of 12-53 A) and consequently their amphiphilic dispersion properties. By controlling the dispersion in water and drying at 80 degrees C, highly ordered self-assembly structures were obtained, presumably as a result of self-piling of clay units in competing vertical and horizontal directions. In general, association with Cu(2+) yielded units with a disklike microstructure, in contrast to the rod-like structure obtained for POP-intercalated clay. The self-assembled structures were characterized using X-ray diffraction, UV adsorption, thermal gravimetric analysis, zeta potential, scanning electron microscopy, and energy-dispersive X-ray spectroscopy techniques. Control of the clay self-piling process provides a new synthetic route for the fabrication of bottom-up microstructures that are potentially useful for templates, sensors, and electronic devices.

  9. Negative control of cell division by mreB, a gene that functions in determining the rod shape of Escherichia coli cells.

    Science.gov (United States)

    Wachi, M; Matsuhashi, M

    1989-06-01

    Exponentially growing Escherichia coli cells containing additional copies of the shape-determining gene mreB were found to be elongated, whereas mreB mutant cells were spherical and overproduced penicillin-binding protein 3, a septum peptidoglycan synthetase. The effect of the mreB gene on expression of ftsI, the structural gene for penicillin-binding protein 3, was examined by using an ftsI-lacZ fusion gene on a plasmid. Formation of beta-galactosidase from the fusion gene was significantly increased in mreB129 mutant cells, and its overproduction was suppressed to a normal level by the presence of a plasmid containing the mreB gene. These results indicate a negative mechanism of control of cell division by this morphology gene and suggest that the gene functions in determining whether division or elongation of the cells occurs.

  10. Horizontal roof gap of backfill hydraulic support

    Institute of Scientific and Technical Information of China (English)

    张强; 张吉雄; 邰阳; 方坤; 殷伟

    2015-01-01

    For the backfill hydraulic support as the key equipment for achieving integration of backfilling and coal mining simultaneously in the practical process, its characteristics will directly influence the backfill body’s compression ratio. Horizontal roof gap, as a key parameter of backfilling characteristics, may impact the backfilling effect from the aspects of control of roof subsidence in advance, support stress, backfilling process and the support design. Firstly, the reason why horizontal roof gap exists was analyzed and its definition, causes and connotation were introduced, then adopting the Pro/E 3D simulation software, three typical 3D entity models of backfill hydraulic supports were built, based on the influence of horizontal roof gap on backfilling effect, and influence rules of four factors, i.e. support height, suspension height, suspension angle and tamping angle, were emphatically analyzed on horizontal roof gap. The results indicate that, the four factors all have significant impacts on horizontal roof gap, but show differences in influence trend and degree, showing negative linear correlation, positive linear correlation, positive semi-parabolic correlation and negative semi-parabolic correlation, respectively. Four legs type is the most adaptive to the four factors, while six legs (II) type has the poorest adaptability, and the horizontal roof gap is small under large support height, small suspension height, small suspension angle and large tamping angle situation. By means of optimizing structure components and their positional relation and suspension height of backfill scrape conveyor in the process of support design and through controlling working face deployment, roof subsidence in advance, mining height and backfilling during engineering application, the horizontal roof gap is optimized. The research results can be served as theoretical basis for support design and guidance for backfill support to have better performance in backfilling.

  11. Topological Mixing with Ghost Rods

    OpenAIRE

    2005-01-01

    Topological chaos relies on the periodic motion of obstacles in a two-dimensional flow in order to form nontrivial braids. This motion generates exponential stretching of material lines, and hence efficient mixing. Boyland et al. [P. L. Boyland, H. Aref, and M. A. Stremler, J. Fluid Mech. 403, 277 (2000)] have studied a specific periodic motion of rods that exhibits topological chaos in a viscous fluid. We show that it is possible to extend their work to cases where the motion of the stirring...

  12. Horizontal versus vertical plate motions

    Directory of Open Access Journals (Sweden)

    M. Cuffaro

    2006-07-01

    Full Text Available We review both present and past motions at major plate boundaries, which have the horizontal component in average 10 to 100 times faster (10–100 mm/yr than the vertical component (0.01–1 mm/yr in all geodynamic settings. The steady faster horizontal velocity of the lithosphere with respect to the upward or downward velocities at plate boundaries supports dominating tangential forces acting on plates. This suggests a passive role of plate boundaries with respect to far field forces determining the velocity of plates. The forces acting on the lithosphere can be subdivided in coupled and uncoupled, as a function of the shear at the lithosphere base. Higher the asthenosphere viscosity, more significant should be the coupled forces, i.e., the mantle drag and the trench suction. Lower the asthenosphere viscosity, more the effects of uncoupled forces might result determinant, i.e., the ridge push, the slab pull and the tidal drag. Although a combination of all forces acting on the lithosphere is likely, the decoupling between lithosphere and mantle suggests that a torque acts on the lithosphere independently of the mantle drag. Slab pull and ridge push are candidates for generating this torque, but, unlike these boundary forces, the advantage of the tidal drag is to be a volume force, acting simultaneously on the whole plates, and being the decoupling at the lithosphere base controlled by lateral variations in viscosity of the low-velocity layer.

  13. Mechanoresponsive change in photoluminescent color of rod-like liquid-crystalline compounds and control of molecular orientation on photoaligned layer

    Science.gov (United States)

    Kondo, Mizuho; Miura, Seiya; Okumoto, Kentaro; Hashimoto, Mayuko; Fukae, Ryohei; Kawatsuki, Nobuhiro

    2014-10-01

    In this paper, we reported novel liquid-crystalline luminophore that switches its photoluminescent color by mechanically grinding. Mechanochromic luminescence (MCL) is expected for mechanical sensor, cellular imaging, detection of microenvironmental changes, and optical memory. In this work, we focused on liquid-crystalline MCL compounds on alignment layer. Controlling the molecular alignment of MCL compounds with photoalignment layer have potential to succeed in functional MCL film such as polarized micropatterned MCL and directional detection of mechanical stimuli. Herein, we prepared asymmetric rodlike MCL compounds containing cyano- and pyridyl molecular terminal and explored their photoluminescence behavior under mechanical stimulus. The cyano terminated compound showed a nematic phase and tuned its photoluminescent color from green to yellow upon grinding, while the pyridyl-terminated compounds that show no mesophase changed its photoluminescent color from blue to green and reverted to its initial color by heating above its melting point. The cyano-terminated MCL was aligned along the orientation direction of photoalignment layer and pyridyl-terminated MCL exhibited uniaxial alignment when it coated on photoaligned film containing carboxylic acid.

  14. Electromagnetic Calculation of Combined Earthing System with Ring Earth Electrode and Vertical Rods for Wind Turbine

    Science.gov (United States)

    Fujii, Toshiaki; Yasuda, Yoh; Ueda, Toshiaki

    With the worldwide spread of wind turbine installations, various problems such as landscape issues, bird strikes and grid connections have arisen. Protection of wind turbines from lightning is cited as one of the main problems. Wind turbines are often struck by lightning because of their open-air locations, such as in mountainous areas, and their special configuration and very-high construction. Especially, low-voltage and control circuits can fail or suffer burnout while blades can incur serious damage if struck by lightning. Wind turbine failures caused by lightning strikes account for approximately 25% of all failures. The problem is regarded as a global one that needs immediate resolution. It is important to understand the impedance characteristics of wind turbine earthing systems from the viewpoint of lightning protection. A report from IEC TR61400-24 recommends a “ring earth electrode”. This was originally defined in IEC 61024 (currently revised and re-numbered as IEC 62305), where such an electrode is recommended to reduce touch and step voltages in households and buildings. IEC TR61400-24 also recommended additional electrodes of vertical or horizontal rods. However, these concepts have not been fully discussed from the viewpoint of its application to wind turbines. To confirm the effect of a combination of a ring earth electrode and additional vertical rods for protection of a wind turbine, this report uses the Finite Difference Time Domain (FDTD) method to present an electromagnetic transient analysis on such a wind turbine earthing system. The results show that an optimal combination can be arranged from viewpoints of lightning protection and construction cost. Thus, this report discusses how to establish a quantitative design methodology of the wind turbine earthing system to provide effective lightning protection.

  15. Acoustic loading effects on oscillating rod bundles

    Energy Technology Data Exchange (ETDEWEB)

    Lin, W.H.

    1980-01-01

    An analytical study of the interaction between an infinite acoustic medium and a cluster of circular rods is described. The acoustic field due to oscillating rods and the acoustic loading on the rods are first solved in a closed form. The acoustic loading is then used as a forcing function for rod responses, and the acousto-elastic couplings are solved simultaneously. Numerical examples are presented for several cases to illustrate the effects of various system parameters on the acoustic reaction force coefficients. The effect of the acoustic loading on the coupled eigenfrequencies are discussed.

  16. Biomolecular rods and tubes in nanotechnology