WorldWideScience

Sample records for holographic optical element

  1. Photovoltaic concentrator using a holographic optical element.

    Science.gov (United States)

    Zhang, Y W; Ih, C S; Yan, H F; Chang, M J

    1988-08-15

    A photovoltaic concentrator is proposed that uses equatorial tracking (the rotation axis of a concentrator points to the North Star), so that the change of the sun's altitude angle is minimized. The solar concentrator consists of a Fresnel lens (objective), a holographic optical element made on photoresist with 90% diffraction efficiency, and a field lens (making the sunlight come from different fields of view uniformly falling on the solar cell). The accuracy of the original 2-D tracking is reduced several orders over previous methods; however, it may be that only 1-D tracking is needed. A theoretical analysis and a study model have been made, and a reasonable concentration ratio has been obtained. Therefore, it can be expected that the cost will be much lower than an accurate 2-D tracking system.

  2. Display applications for holographic optical elements

    Science.gov (United States)

    Gambogi, William J., Jr.; Armstrong, Mark L.; Hamzavy, Babak; Levin, Michael L.; Mackara, Steven R.; Molteni, William J., Jr.; Steijn, Kirk W.; Stevenson, Sylvia H.; Felder, Thomas C.; Heidt, Gerald L.; Miller, Douglas R.

    2001-06-01

    In the last several years, holographic elements have been introduced into a wide array of display applications. Holographic Reflectors are incorporated with liquid crystal displays to shift optimum viewing angle away form specular glare and raise brightness by concentrating light at a convenient viewing angle. Reflectors can be produced in blue, green, gold, red, or white colors. Denso GlassVision projection screens incorporate transmission holograms to efficiently direct projected light to the viewer in a screen that reverts to clear glass When the projection image is turned off. JVC has introduce da large-screen HDTV that uses a holographic color filter to separate blue, green, and red light from the illumination beam, and direct the sorted colors to the appropriate color pixel, raising brightness with a passive component. Most recently, HOE prototypes have been produced to improve the efficiency of portable liquid crystal color display. Front diffuser are affixed to the face of reflective color LCDs and direct output light from the LCD to the viewer at a convenient viewing angle in a concentrated view cone. Reflective Colors Filters are pixelated diffuse reflectors internal to the LCD structure and aligned to the LCD matrix. These reflective filters provide higher brightness, larger color gamut, and better color saturation including a holographic grating are under development to provide wider view angle in direct-view LCDs.

  3. Holographic display for see-through augmented reality using mirror-lens holographic optical element.

    Science.gov (United States)

    Li, Gang; Lee, Dukho; Jeong, Youngmo; Cho, Jaebum; Lee, Byoungho

    2016-06-01

    A holographic display system for realizing a three-dimensional optical see-through augmented reality (AR) is proposed. A multi-functional holographic optical element (HOE), which simultaneously performs the optical functions of a mirror and a lens, is adopted in the system. In the proposed method, a mirror that is used to guide the light source into a reflection type spatial light modulator (SLM) and a lens that functions as Fourier transforming optics are recorded on a single holographic recording material by utilizing an angular multiplexing technique of volume hologram. The HOE is transparent and performs the optical functions just for Bragg matched condition. Therefore, the real-world scenes that are usually distorted by a Fourier lens or an SLM in the conventional holographic display can be observed without visual disturbance by using the proposed mirror-lens HOE (MLHOE). Furthermore, to achieve an optimized optical recording condition of the MLHOE, the optical characteristics of the holographic material are measured. The proposed holographic AR display system is verified experimentally.

  4. Performance analysis and material dependence of micro holographic optical elements as couplers for fiber optic communication

    Science.gov (United States)

    Ambadiyil, Sajan; Prasannan, G.; Sathyan, Jithesh; Ajith Kumar, P. T.

    2005-01-01

    Holographic Optical Elements (HOEs) are gaining much importance and finding newer and better applications in areas of optical fiber communication and optical information processing systems. In contrast to conventional HOEs, optical communication and information systems require smaller and efficient elements of desired characteristics and transfer functions. Such Micro Holographic Optical Elements (MHOEs) can either be an HOE, recorded with two narrow beams of laser light or a segment cut from a larger HOE (SHOEs), and recorded in the conventional manner. In this study, micro holographic couplers, having specific focusing and diffraction characteristics were recorded in different holographic recording media such as silver halide and dichromated gelatin. Wavelength response of the elements was tested at 633 nm and 442 nm. Variation in diffraction efficiency/coupling factor, and insertion loss of the elements were studied. The paper reports in detail about the above results and related design considerations.

  5. Color waveguide transparent screen using lens array holographic optical element

    Science.gov (United States)

    Liu, Siqi; Sun, Peng; Wang, Chang; Zheng, Zhenrong

    2017-11-01

    A color transparent screen was designed in this paper, a planar glass was used as a waveguide structure and the lens array holographic optical element (HOE) was used as a display unit. The lens array HOE was exposed by two coherent beams. One was the reference wave which directly illuminated on the holographic material and the other was modulated by the micro lens array. The lens array HOE can display the images with see-through abilities. Unlike the conventional lens array HOE, a planar glass was adopted as the waveguide in the experiment. The projecting light was totally internal-reflected in the planar glass to eliminate the undesired zero-order diffracted light. By using waveguide, it also brings advantage of compact structure. Colorful display can be realized in our system as the holographic materials were capable for multi-wavelength display. In this paper, a color transparent screen utilizing the lens array HOE and waveguide were designed. Experiment results showed a circular display area on the transparent screen. The diameter of the area is 20 mm and it achieved the pixel resolution of 100 μm. This simple and effective method could be an alternative in the augment reality (AR) applications, such as transparent phone and television.

  6. Coherent backlight unit using holographic optical elements for full-color flat-panel holographic display

    Science.gov (United States)

    Kim, Sun Il; Choi, Chil-Sung; An, Jungkwuen; Song, Hoon; Kim, Yunhee; Kim, Young; Sung, Geeyoung; Seo, Wontaek; Seo, Juwon; Kim, Yun-Tae; Kim, Hojung; Kim, Yongkyu; Lee, Hong-Seok; Hwang, Sungwoo

    2017-03-01

    We propose the coherent backlight unit (BLU) using Holographic Optical Element (HOE) for full-color flat-panel holographic display. The HOE BLU consists of two reflective type HOEs that change the optical beam path and shape by diffraction. The diverging incident beam is transformed to the collimated beam which has a very small diffraction angle (7.5°) by HOE 1 (H1) in order to illuminate the whole display. This collimated beam is converged to a point at a distance from the glass substrate by HOE 2 (H2). As a result, the diverging incident beam is converted to a point light by H1 and H2. When the high resolution Spatial Light Modulator (SLM) displaying Computer Generated Hologram (CGH) is illuminated by HOE BLU, the hologram image is displayed at a view point near focal point. Practically, we fabricated the full color HOE BLU for 5.5" flat panel holographic display by using the proposed design. At least 5.5" size of HOE is required to illuminate the whole panel. For this reason, we recorded 150 mm x 90 mm size HOE on the 10 mm thickness glass substrate. This HOE BLU exhibits a total efficiency of 8.0% at Red (660 nm), 7.7% at Green (532 nm), 3.2% at Blue (460 nm) using optimized recording conditions for each wavelength. Finally, a bright full color hologram image was achieved.

  7. Thin combiner optics utilizing volume holographic optical elements (vHOEs) using Bayfol HX photopolymer film

    Science.gov (United States)

    Bruder, Friedrich-Karl; Fäcke, Thomas; Hagen, Rainer; Hansen, Sven; Manecke, Christel; Orselli, Enrico; Rewitz, Christian; Rölle, Thomas; Walze, Günther

    2017-06-01

    The main function of any augmented reality system is to seamlessly merge the real world perception of a viewer with computer generated images and information. Besides real-time head-tracking and room-scanning capabilities the combiner optics, which optically merge the natural with the artificial visual information, represent a key component for those systems. Various types of combiner optics are known to the industry, all with their specific advantages and disadvantages. Beside the well-established solutions based on refractive optics or surface gratings, volume Holographic Optical Elements (vHOEs) are a very attractive alternative in this field. The unique characteristics of these diffractive grating structures - being lightweight, thin, flat and invisible in Off Bragg conditions - make them perfectly suitable for their use in integrated and compact combiners. For any consumer application it is paramount to build unobtrusive and lightweight augmented reality displays, for which those volume holographic combiners are ideally suited. Due to processing challenges of (historic) holographic recording materials mass production of vHOE holographic combiners was not possible. Therefore vHOE based combiners found use in military applications only by now. The new Bayfol® HX instant developing holographic photopolymer film provides an ideal technology platform to optimize the performance of vHOEs in a wide range of applications. Bayfol® HX provides full color capability and adjustable diffraction efficiency as well as an unprecedented optical clarity when compared to classical holographic recording materials like silver halide emulsions (AgHX) or dichromated gelatin (DCG). Bayfol® HX film is available in industrial scale and quality. Its properties can be tailored for various diffractive performances and integration methods. Bayfol® HX film is easy to process without any need for chemical or thermal development steps, offering simplified contact-copy mass production

  8. Multipoint laser Doppler vibrometry using holographic optical elements and a CMOS digital camera.

    Science.gov (United States)

    Connelly, Michael J; Szecówka, Przemyslaw M; Jallapuram, Raghavendra; Martin, Suzanne; Toal, Vincent; Whelan, Maurice P

    2008-02-15

    A laser Doppler vibrometer (LDV) is described in which holographic optical elements are used to provide the interferometer reference and object illumination beams. A complementary metal-oxide semiconductor camera, incorporating a digital signal processor, is used to carry out real-time signal processing of the interferometer output to allow multipoint LDV to be implemented.

  9. Compact holographic optical element-based electronic speckle pattern interferometer for rotation and vibration measurements

    Science.gov (United States)

    Bavigadda, Viswanath; Moothanchery, Mohesh; Pramanik, Manojit; Mihaylova, Emilia; Toal, Vincent

    2017-03-01

    An out-of-plane sensitive electronic speckle pattern interferometer (ESPI) using holographic optical elements (HOEs) for studying rotations and vibrations is presented. Phase stepping is implemented by modulating the wavelength of the laser diode in a path length imbalanced interferometer. The time average ESPI method is used for vibration measurements. Some factors influencing the measurements accuracy are reported. Some advantages and limitations of the system are discussed.

  10. Fluorinated silicate glass for conventional and holographic optical elements

    Science.gov (United States)

    Glebov, Leonid

    2007-04-01

    This presentation is a survey of results of a long-term research at the laboratory of photoinduced processes at CREOL/UCF. A highly homogeneous and transparent sodium-zinc-aluminum-silicate glass doped with fluorine and bromine was developed. Glass is transparent from 220 to 2700 nm. It is a crown-type optical glass having refractive index at 587.5 nm nd=1.4959 and Abbe number νd=59.2. This glass shows low dependence of refractive index on temperature dn/dtGlass can withstand multi-kilowatt laser beams. Nonlinear refractive index is the same as for fused silica. Laser damage threshold for 8 ns is about 40 /cm2. This glass becomes a photosensitive one by doping with silver and cerium. It demonstrates refractive index decrement after exposure to UV radiation followed by thermal development and therefore is used for phase volume hologram recording. Spatial modulation of refractive index resulted from precipitation of nano-crystalline phase of sodium fluoride. The main mechanism of refractive index decrement is a photoelastic effect resulted from strong tensions generated in both crystalline and vitreous phases because of difference in their coefficients of thermal expansion. Volume Bragg gratings recorded in this glass, show extremely narrow spectral and angular selectivity and have low losses combined with high tolerance to laser radiation. These gratings possess a unique ability to produce laser beam transformations directly in angular space. This feature paves a way to creation of high power lasers with stable narrow emission spectra and diffraction limited divergence.

  11. Holographic Optical Data Storage

    Science.gov (United States)

    Timucin, Dogan A.; Downie, John D.; Norvig, Peter (Technical Monitor)

    2000-01-01

    Although the basic idea may be traced back to the earlier X-ray diffraction studies of Sir W. L. Bragg, the holographic method as we know it was invented by D. Gabor in 1948 as a two-step lensless imaging technique to enhance the resolution of electron microscopy, for which he received the 1971 Nobel Prize in physics. The distinctive feature of holography is the recording of the object phase variations that carry the depth information, which is lost in conventional photography where only the intensity (= squared amplitude) distribution of an object is captured. Since all photosensitive media necessarily respond to the intensity incident upon them, an ingenious way had to be found to convert object phase into intensity variations, and Gabor achieved this by introducing a coherent reference wave along with the object wave during exposure. Gabor's in-line recording scheme, however, required the object in question to be largely transmissive, and could provide only marginal image quality due to unwanted terms simultaneously reconstructed along with the desired wavefront. Further handicapped by the lack of a strong coherent light source, optical holography thus seemed fated to remain just another scientific curiosity, until the field was revolutionized in the early 1960s by some major breakthroughs: the proposition and demonstration of the laser principle, the introduction of off-axis holography, and the invention of volume holography. Consequently, the remainder of that decade saw an exponential growth in research on theory, practice, and applications of holography. Today, holography not only boasts a wide variety of scientific and technical applications (e.g., holographic interferometry for strain, vibration, and flow analysis, microscopy and high-resolution imagery, imaging through distorting media, optical interconnects, holographic optical elements, optical neural networks, three-dimensional displays, data storage, etc.), but has become a prominent am advertising

  12. Effectiveness of holographic optical element module sensor in measuring blood prothrombin time

    Science.gov (United States)

    Lin, Yu-Cheng; Yen, Shih-Chieh; Cheng, Stone; Huang, Tony

    2014-07-01

    A small-form-factor holographic optical element (HOE) module, which was mounted on a dual-stage seesaw actuator, was utilized to evaluate blood coagulation in real time. The method involved assessing the decrease in transmitted light of the blood sample surface when the clotting is formed. The prothrombin time (PT) was measured by illumining and focusing a 635 nm laser beam onto the sample. As the fibrinogen turned into non-solute fibrin, the transmitted efficiency and total intensity of the reflected light from the reflector changed. A low-pass filter suppressed the noise in the coagulation-related transient response to yield accurate signals. Finally, the PT measurements were compared to those made classically using other optical sensors.

  13. Enhanced depth-of-field of an integral imaging microscope using a bifocal holographic optical element-micro lens array.

    Science.gov (United States)

    Kwon, Ki-Chul; Lim, Young-Tae; Shin, Chang-Won; Erdenebat, Munkh-Uchral; Hwang, Jae-Moon; Kim, Nam

    2017-08-15

    We propose and implement an integral imaging microscope with extended depth-of-field (DoF) using a bifocal holographic micro lens array (MLA). The properties of the two MLAs are switched via peristrophic multiplexing, where different properties of the MLA are recorded onto the single holographic optical element (HOE). The recorded MLA properties are perpendicular to each other: after the first mode is recorded, the HOE is rotated by 90° clockwise, and the second mode is recorded. The experimental results confirm that the DoF of the integral imaging microscopy system is extended successfully by using the bifocal MLA.

  14. Implementation of phase-shift patterns using a holographic projection system with phase-only diffractive optical elements.

    Science.gov (United States)

    Hsu, Wei-Feng; Chen, Yu-Wen; Su, Yuan-Hong

    2011-07-10

    We proposed a method to implement spatial phase-shift patterns with subdiffraction limited features through a holographic projection system. The input device of the system displayed phase-only diffractive optical elements that were calculated using the iterative Fourier-transform algorithm with the dummy-area method. By carefully designing the target patterns to the algorithm, the diffractive optical elements generated the Fourier-transformed images containing the phase-shift patterns in which the widths of dark lines were smaller than the diffraction limit. With these demonstrations, we have successfully shown that the near-field phase-shift lithographic technique can be realized through an inexpensive maskless lithographic system and can still achieve subdiffraction limited images. © 2011 Optical Society of America

  15. Holographic Video Disc And Laser Scanning Optics.

    Science.gov (United States)

    Weingartner, I.; Rosenbruch, K. J.

    1983-10-01

    Holographic optical elements or systems of holographic elements may replace glass optical imaging systems or may be used for the correction of glass optics. The main advantages of such systems are their low weight, small and compact construction, and their simple and inexpensive manufacture. The disadvantages to be overcome are mainly the low light through-put and chromatic aberrations. In the special case of optics for video discs we present an optical imaging system which is capable of giving the required high resolution for illumination with polychromatic radiation of limited bandwidth in the case of semiconductor laser diodes. Optimization programs based on ray tracing yield highly corrected imaging systems by comparably simple holographic means. The use of only two surfaces gives very compact and lightweight systems, the image quality of which is described for monochromatic and polychro-matic irradiance by means of optical transfer functions. The holograms are recorded on photo-resist material with short wavelength laser radiation. Such holograms have almost no scatter light and do not alter their properties with time or under radiation. These holograms generate wavefronts for the correction of aberrations which, in the case of glass optics, could only be achieved by aspherical surfaces.

  16. Holographic Gratings for Slow-Neutron Optics

    Science.gov (United States)

    Klepp, Juergen; Pruner, Christian; Tomita, Yasuo; Geltenbort, Peter; Drevenšek-Olenik, Irena; Gyergyek, Saso; Kohlbrecher, Joachim; Fally, Martin

    2012-01-01

    Recent progress in the development of holographic gratings for neutron-optics applications is reviewed. We summarize the properties of gratings recorded in deuterated (poly)methylmethacrylate, holographic polymer-dispersed liquid crystals and nanoparticle-polymer composites revealed by diffraction experiments with slow neutrons. Existing and anticipated neutron-optical instrumentations based on holographic gratings are discussed.

  17. Performance optimization in mass production of volume holographic optical elements (vHOEs) using Bayfol HX photopolymer film

    Science.gov (United States)

    Bruder, Friedrich-Karl; Fäcke, Thomas; Grote, Fabian; Hagen, Rainer; Hönel, Dennis; Koch, Eberhard; Rewitz, Christian; Walze, Günther; Wewer, Brita

    2017-05-01

    Volume Holographic Optical Elements (vHOEs) gained wide attention as optical combiners for the use in smart glasses and augmented reality (SG and AR, respectively) consumer electronics and automotive head-up display applications. The unique characteristics of these diffractive grating structures - being lightweight, thin and flat - make them perfectly suitable for use in integrated optical components like spectacle lenses and car windshields. While being transparent in Off-Bragg condition, they provide full color capability and adjustable diffraction efficiency. The instant developing photopolymer Bayfol® HX film provides an ideal technology platform to optimize the performance of vHOEs in a wide range of applications. Important for any commercialization are simple and robust mass production schemes. In this paper, we present an efficient and easy to control one-beam recording scheme to copy a so-called master vHOE in a step-and-repeat process. In this contact-copy scheme, Bayfol® HX film is laminated to a master stack before being exposed by a scanning laser line. Subsequently, the film is delaminated in a controlled fashion and bleached. We explain working principles of the one-beam copy concept, discuss the opto-mechanical construction and outline the downstream process of the installed vHOE replication line. Moreover, we focus on aspects like performance optimization of the copy vHOE, the bleaching process and the suitable choice of protective cover film in the re-lamination step, preparing the integration of the vHOE into the final device.

  18. Holographic Optical Element-Based Laser Diode Source System for Direct Metal Deposition in Space Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To meet the challenges of rapid prototyping, direct hardware fabrication, and on-the-spot repairs on the ground and on NASA space platforms, Physical Optics...

  19. Holographic fluorescence microscopy with incoherent digital holographic adaptive optics.

    Science.gov (United States)

    Jang, Changwon; Kim, Jonghyun; Clark, David C; Lee, Seungjae; Lee, Byoungho; Kim, Myung K

    2015-01-01

    Introduction of adaptive optics technology into astronomy and ophthalmology has made great contributions in these fields, allowing one to recover images blurred by atmospheric turbulence or aberrations of the eye. Similar adaptive optics improvement in microscopic imaging is also of interest to researchers using various techniques. Current technology of adaptive optics typically contains three key elements: a wavefront sensor, wavefront corrector, and controller. These hardware elements tend to be bulky, expensive, and limited in resolution, involving, for example, lenslet arrays for sensing or multiactuator deformable mirrors for correcting. We have previously introduced an alternate approach based on unique capabilities of digital holography, namely direct access to the phase profile of an optical field and the ability to numerically manipulate the phase profile. We have also demonstrated that direct access and compensation of the phase profile are possible not only with conventional coherent digital holography, but also with a new type of digital holography using incoherent light: selfinterference incoherent digital holography (SIDH). The SIDH generates a complex—i.e., amplitude plus phase—hologram from one or several interferograms acquired with incoherent light, such as LEDs, lamps, sunlight, or fluorescence. The complex point spread function can be measured using guide star illumination and it allows deterministic deconvolution of the full-field image. We present experimental demonstration of aberration compensation in holographic fluorescence microscopy using SIDH. Adaptive optics by SIDH provides new tools for improved cellular fluorescence microscopy through intact tissue layers or other types of aberrant media.

  20. Five beam holographic lithography for simultaneous fabrication of three dimensional photonic crystal templates and line defects using phase tunable diffractive optical element.

    Science.gov (United States)

    Lin, Yuankun; Harb, Ahmad; Lozano, Karen; Xu, Di; Chen, K P

    2009-09-14

    This paper demonstrates an approach for laser holographic patterning of three-dimensional photonic lattice structures using a single diffractive optical element. The diffractive optical element is fabricated by recording gratings in a photosensitive polymer using a two-beam interference method and has four diffraction gratings oriented with four-fold symmetry around a central opening. Four first-order diffracted beams from the gratings and one non-diffracted central beam overlap and form a three-dimensional interference pattern. The phase of one side beam is delayed by inserting a thin piece of microscope glass slide into the beam. By rotating the glass slide, thus tuning the phase of the side beam, the five beam interference pattern changes from face-center tetragonal symmetry into diamond-like lattice symmetry with an optimal bandgap. Three-dimensional photonic crystal templates are produced in a photoresist and show the phase tuning effect for bandgap optimization. Furthermore, by integrating an amplitude mask in the central opening, line defects are produced within the photonic crystal template. This paper presents the first experimental demonstration on the holographic fabrication approach of three-dimensional photonic crystal templates with functional defects by a single laser exposure using a single optical element.

  1. Holographic Optics For Vision Systems

    Science.gov (United States)

    Freeman, Michael H.

    1989-05-01

    The human visual system is often equated to a photographic camera. This is a poor analogy because the differences are far greater than the similarities. The processing of the human visual system is complex and non-linear so that even optical transfer function concepts must be applied with caution. Holographic optics offers some extra degrees of freedom with respect to refractive optics. Unlike refractive optics, diffractive effects are not, in the first order, dependent on material and geometric shape and require no significant volume. On the other hand they may suffer from fractional efficiencies and strong wavelength dependencies. The Pilkington 'Diffrax' lens invented by the author is an example of a product which steers between the disadvantages and maximises the advantages to provide the world's first diffractive bifocal contact lens. Indications for other visual applications are not very propitious although time and development may show this to be incorrect. This paper will review the interaction between the preferences and antipathies of the human visual system and the optical effects of diffractive systems.

  2. Visor-display design based on planar holographic optics.

    Science.gov (United States)

    Amitai, Y; Reinhorn, S; Friesem, A A

    1995-03-10

    A method for designing and recording visor displays based on planar holographic optics is presented. This method can deal with the problem of recording-readout wavelength shift. The display system is composed of two holographic optical elements that are recorded on the same substrate. One element collimates the waves from each data point in the display into a plane wave that is trapped inside the substrate by total internal reflection. The other diffracts the plane waves into the eye of an observer. Because the chromatic dispersion of the first element can be corrected by the dispersion of the second, this configuration is relatively insensitive to source wavelength shifts. The method is illustrated by the design, recording, and testing of a compact holographic doublet visor display. The recording was at a wavelength of 458 nm, and readout was at 633 nm. The results indicate that diffraction-limited performance and relatively low chromatic dispersion over a wide field of view can be obtained.

  3. Mass production of volume holographic optical elements (vHOEs) using Bayfol® HX photopolymer film in a roll-to-roll copy process

    Science.gov (United States)

    Bruder, Friedrich-Karl; Fäcke, Thomas; Grote, Fabian; Hagen, Rainer; Hönel, Dennis; Koch, Eberhard; Rewitz, Christian; Walze, Günther; Wewer, Brita

    2017-03-01

    Volume Holographic Optical Elements (vHOEs) gained wide attention as optical combiners for the use in augmented and virtual reality (AR and VR, respectively) consumer electronics and automotive head-up display applications. The unique characteristics of these diffractive grating structures - being lightweight, thin and flat - make them perfectly suitable for use in integrated optical components like spectacle lenses and car windshields. While being transparent in Off-Bragg condition, they provide full color capability and adjustable diffraction efficiency. The instant developing photopolymer Bayfol® HX film provides an ideal technology platform to optimize the performance of vHOEs in a wide range of applications. Important for any commercialization are simple and robust mass production schemes. In this paper, we present an efficient and easy to control one-beam recording scheme to copy a so-called master vHOE in a step-and-repeat process. In this contact-copy scheme, Bayfol® HX film is laminated to a master stack before being exposed by a scanning laser line. Subsequently, the film is delaminated in a controlled fashion and bleached. We explain working principles of the one-beam copy concept and discuss the mechanical construction of the installed vHOE replication line. Moreover, we treat aspects like master design, effects of vibration and suppression of noise gratings. Furthermore, digital vHOEs are introduced as master holograms. They enable new ways of optical design and paths to large scale vHOEs.

  4. Analogue holographic correspondence in optical metamaterials

    Science.gov (United States)

    Khveshchenko, D. V.

    2015-03-01

    We assess the prospects of using metamaterials for simulating various aspects of analogue gravity and holographic correspondence. Albeit requiring a careful engineering of the dielectric media, some hallmark features reminiscent of the hypothetical “generalized holographic conjecture” can be detected by measuring non-local optical field correlations. The possibility of such simulated behavior might also shed light on the true origin of those ostensibly holographic phenomena in the condensed-matter systems with emergent effective metrics which may not, in fact, require any reference to the string-theoretical holography.

  5. Liquid crystals for holographic optical data storage

    DEFF Research Database (Denmark)

    Matharu, Avtar; Jeeva, S.; Ramanujam, P.S.

    2007-01-01

    A tutorial review is presented to inform and inspire the reader to develop and integrate strong scientific links between liquid crystals and holographic data storage, from a materials scientist's viewpoint. The principle of holographic data storage as a means of providing a solution...... to the information storage demands of the 21st century is detailed. Holography is a small subset of the much larger field of optical data storage and similarly, the diversity of materials used for optical data storage is enormous. The theory of polarisation holography which produces holograms of constant intensity...

  6. Realization of an optical interferometer based on holographic optics ...

    Indian Academy of Sciences (India)

    Keywords. Interferometry; holography; optical testing instruments. Abstract. The paper describes a simple and cost effective method for the realization of an optical interferometer based on holographic optics, which use minimal bulk optical components. The optical arrangement in the proposed method involves a very simple ...

  7. Multiplexed fluorescence spectroscopy with holographic optical tweezers

    Science.gov (United States)

    Cibula, M. A.; Kendrick, M. J.; Gruss, D. S.; Bychkova, V.; Pylypiuk, N.; Koesdjojo, M.; Remcho, V. T.; Ostroverkhova, O.; McIntyre, D. H.

    2011-10-01

    We present a multiplexed spectroscopy technique using holographic optical tweezers to trap and excite multiple sensor particles. Our goal is to develop a lab-on-a-chip measurement platform for monitoring pH and other ion concentrations with high spatial resolution in a microfluidic device or within biological cells. We have developed a variety of polymeric pH/ion sensitive nanoparticles with fluorescence spectra that change with the pH/ion concentration of the surrounding environment. We optically trap and manipulate multiple nanosensors using holographic optical tweezers. The trapped particles are irradiated with a separate excitation laser and the fluorescence from all the particles is detected simultaneously with an imaging spectrometer. Electronic separation of the parallel, discrete spectra allows for concurrent determination of multiple spectra.

  8. Analysis of holographic polymer-dispersed liquid crystals (HPDLCs) for tunable low frequency diffractive optical elements recording

    Science.gov (United States)

    Fernández, R.; Gallego, S.; Márquez, A.; Francés, J.; Martínez, F. J.; Pascual, I.; Beléndez, A.

    2018-02-01

    Holographic polymer dispersed liquid crystals (HPDLCs) are the result of the optimization of the photopolymer fabrication techniques. They are made by recording in a photopolymerization induced phase separation process (PIPS) in which the liquid crystal molecules diffuse to dark zones in the diffraction grating originated. Thanks to the addition of liquid crystal molecules to the composition, this material has a dynamic behavior by reorientation of the liquid crystal molecules applying an electrical field. In this sense, it is possible to use this material to make dynamic devices. In this work, we study the behavior of this material working in low frequencies with different spatial periods of blazed gratings, a sharp profile whose recording is possible thanks to the addition of a Holoeye LCoS-Pluto spatial light modulator with a resolution of 1920 × 1080 pixels (HD) and a pixel size of 8 × 8 μm2. This device allows us to have an accurate and dynamic control of the phase and amplitude of the recording beam.

  9. HOMES - Holographic Optical Method for Exoplanet Spectroscopy Project

    Data.gov (United States)

    National Aeronautics and Space Administration — HOMES (Holographic Optical Method for Exoplanet Spectroscopy) is a space telescope designed for exoplanet discovery. Its double dispersion architecture employs a...

  10. Holographic Optical Receiver Front End for Wireless Infrared Indoor Communications

    Science.gov (United States)

    Jivkova, S.; Kavehrad, M.

    2001-06-01

    Multispot diffuse configuration (MSDC) for indoor wireless optical communications, utilizing multibeam transmitter and angle diversity detection, is one of the most promising ways of achieving high capacities for use in high-bandwidth islands such as classrooms, hotel lobbies, shopping malls, and train stations. Typically, the optical front end of the receiver consists of an optical concentrator to increase the received optical signal power and an optical bandpass filter to reject the ambient light. Using the unique properties of holographic optical elements (HOE), we propose a novel design for the receiver optical subsystem used in MSDC. With a holographic curved mirror as an optical front end, the receiver would achieve more than an 10-dB improvement in the electrical signal-to-noise ratio compared with a bare photodetector. Features such as multifunctionality of the HOE and the receiver s small size, light weight, and low cost make the receiver front end a promising candidate for a user s portable equipment in broadband indoor wireless multimedia access.

  11. Holographic acoustic elements for manipulation of levitated objects

    Science.gov (United States)

    Marzo, Asier; Seah, Sue Ann; Drinkwater, Bruce W.; Sahoo, Deepak Ranjan; Long, Benjamin; Subramanian, Sriram

    2015-10-01

    Sound can levitate objects of different sizes and materials through air, water and tissue. This allows us to manipulate cells, liquids, compounds or living things without touching or contaminating them. However, acoustic levitation has required the targets to be enclosed with acoustic elements or had limited manoeuvrability. Here we optimize the phases used to drive an ultrasonic phased array and show that acoustic levitation can be employed to translate, rotate and manipulate particles using even a single-sided emitter. Furthermore, we introduce the holographic acoustic elements framework that permits the rapid generation of traps and provides a bridge between optical and acoustical trapping. Acoustic structures shaped as tweezers, twisters or bottles emerge as the optimum mechanisms for tractor beams or containerless transportation. Single-beam levitation could manipulate particles inside our body for applications in targeted drug delivery or acoustically controlled micro-machines that do not interfere with magnetic resonance imaging.

  12. Setting up of holographic optical tweezer arrays

    Science.gov (United States)

    Gupta, Deepak K.; Tata, B. V. R.; Ravindran, T. R.

    2017-05-01

    Optical tweezers use tightly focused laser beams to hold and move microscopic objects in a solvent. However, many applications require simultaneous control over multitude of particles, positioning them in 3D space at desired locations with desired symmetry, which is made possible by the use of holographic optical tweezers using the technique of beam shaping and holography. We have designed and developed a holographic optical tweezer set-up using a phase only liquid crystal, reflective spatial light modulator. We employ the technique of phase modulation to modulate the phase of the beam by generating holograms using Random Superposition (RS) and weighted Gerchberg Saxton algorithm (WGS) algorithm for generating desired patterns of light at the trapping plane. A 4×4 array of beams with square symmetry was generated using WGS algorithm and trapped polystyrene particles of size 1.2 micron in a 4×4 two dimensional array. There were uniformity issues among the trap intensities, as we move away from the zeroth order spot. This was corrected by taking into account diffraction effects due to the pixelated nature of SLM modulating the intensity of the trap spots and the ghost order suppression by spatial disorder.

  13. Norland Optical Adhesive 72® as phase holographic material

    Directory of Open Access Journals (Sweden)

    Mauricio Ortiz-Gutiérrez

    2015-12-01

    Full Text Available Characterization of the holographic material composed by adhesive polymer Norland Optical Adhesive 72® (NOA 72® was studied. With a wavelength of 457 nm from an Ar laser, real time phase holographic gratings under different parameters such as energy, frequency and thickness were recorded. The diffraction efficiency of the recorded holographic gratings was measured and some experimental results are shown. Furthermore, the material was used to record Fourier holograms.

  14. Techniques for writing and reading data on an optical disk which include formation of holographic optical gratings in plural locations on the optical disk

    Science.gov (United States)

    Liu, Tsuen-Hsi (Inventor); Psaltis, Demetri (Inventor); Mok, Fai H. (Inventor); Zhou, Gan (Inventor)

    2005-01-01

    An optical memory for storing and/or reading data on an optical disk. The optical disk incorporates a material in which holographic gratings can be created, and subsequently detected, at plural locations within the disk by an electro-optical head. Creation and detection of holographic gratings with variable diffraction efficiency is possible with the electro-optical head. Multiple holographic gratings can also be created at each one of the plural locations via a beam of light which has a different wavelength or point of focus. These data elements can be read by the electro-optical head using a beam of light sequentially varied in wavelength or point of focus to correspond to the multiple holographic gratings to be recorded.

  15. A novel collinear optical setup for holographic data storage system

    Science.gov (United States)

    Horimai, Hideyoshi; Li, Jun

    2004-09-01

    In this paper, A novel collinear optical setup for holographic data storage system is presented. Simulated/experimental results are given. Combined with sub-page based data format, the system is simple and robust.

  16. Handbook of Holographic Interferometry: Optical and Digital Methods

    Science.gov (United States)

    Kreis, Thomas

    2005-01-01

    The book presents the principles and methods of holographic interferometry - a coherent-optical measurement technique for deformation and stress analysis, for the determination of refractive-index distributions, or applied to non-destructive testing. Emphasis of the book is on the quantitative computer-aided evaluation of the holographic interferograms. Based upon wave-optics the evaluation methods, their implementation in computer-algorithms, and their applications in engineering are described.

  17. Rewritable three-dimensional holographic data storage via optical forces

    Energy Technology Data Exchange (ETDEWEB)

    Yetisen, Ali K., E-mail: ayetisen@mgh.harvard.edu [Harvard Medical School and Wellman Center for Photomedicine, Massachusetts General Hospital, 65 Landsdowne Street, Cambridge, Massachusetts 02139 (United States); Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Montelongo, Yunuen [Department of Chemistry, Imperial College London, South Kensington Campus, London SW7 2AZ (United Kingdom); Butt, Haider [Nanotechnology Laboratory, School of Engineering Sciences, University of Birmingham, Birmingham B15 2TT (United Kingdom)

    2016-08-08

    The development of nanostructures that can be reversibly arranged and assembled into 3D patterns may enable optical tunability. However, current dynamic recording materials such as photorefractive polymers cannot be used to store information permanently while also retaining configurability. Here, we describe the synthesis and optimization of a silver nanoparticle doped poly(2-hydroxyethyl methacrylate-co-methacrylic acid) recording medium for reversibly recording 3D holograms. We theoretically and experimentally demonstrate organizing nanoparticles into 3D assemblies in the recording medium using optical forces produced by the gradients of standing waves. The nanoparticles in the recording medium are organized by multiple nanosecond laser pulses to produce reconfigurable slanted multilayer structures. We demonstrate the capability of producing rewritable optical elements such as multilayer Bragg diffraction gratings, 1D photonic crystals, and 3D multiplexed optical gratings. We also show that 3D virtual holograms can be reversibly recorded. This recording strategy may have applications in reconfigurable optical elements, data storage devices, and dynamic holographic displays.

  18. Holographic telescope

    Science.gov (United States)

    Odhner, Jefferson E.

    2016-07-01

    Holographic optical elements (HOEs) work on the principal of diffraction and can in some cases replace conventional optical elements that work on the principal of refraction. An HOE can be thinner, lighter, can have more functionality, and can be lower cost than conventional optics. An HOE can serve as a beam splitter, spectral filter, mirror, and lens all at the same time. For a single wavelength system, an HOE can be an ideal solution but they have not been widely accepted for multispectral systems because they suffer from severe chromatic aberration. A refractive optical system also suffers from chromatic aberration but it is generally not as severe. To color correct a conventional refractive optical system, a flint glass and a crown glass are placed together such that the color dispersion of the flint and the crown cancel each other out making an achromatic lens (achromat) and the wavelengths all focus to the same point. The color dispersion of refractive lenses and holographic lenses are opposite from each other. In a diffractive optical system, long wavelengths focus closer (remember for HOEs: RBM "red bends more") than nominal focus while shorter wavelengths focus further out. In a refractive optical system, it is just the opposite. For this reason, diffractives can be incorporated into a refractive system to do the color correction and often cut down on the number of optical elements used [1.]. Color correction can also be achieved with an all-diffractive system by combining a holographic optical element with its conjugate. In this way the color dispersion of the first holographic optical element can be cancelled by the color dispersion of the second holographic optic. It is this technique that will be exploited in this paper to design a telescope made entirely of holographic optical elements. This telescope could be more portable (for field operations) the same technique could be used to make optics light enough for incorporation into a UAV.

  19. Process optimization for the manufacturing of holographic elements using Darol photopolymer

    Science.gov (United States)

    Zanutta, Alessio; Resio, Federico; Bertarelli, Chiara; Bianco, Andrea

    2017-11-01

    Design and manufacturing of high efficiency and reliable volume phase holographic optical elements require photosensitive materials where the performances of the device are straightforwardly related to the recording and post process parameters. In this context, Darol® photopolymers are promising materials since the modulation of the refractive index is set during the thermal process that follows the holographic exposure. In the present study, dry Darol® films are thermally processed to determine the optimized conditions to achieve a large modulation of the refractive index together with good optical properties of the hologram (i.e. transparency), flatness and homogeneity. For each condition, volume phase gratings are written and characterized in terms of diffraction efficiency. A threshold temperature of 150 °C is found, and only latent holograms are obtained at lower temperature, as confirmed by thermal characterizations. Moreover, a dependence of the refractive index modulation on the line density and laser intensity is highlighted.

  20. Analysis of a holographic laser adaptive optics system using a deformable mirror.

    Science.gov (United States)

    Yao, Kainan; Wang, Jianli; Liu, Xinyue; Lin, Xudong; Chen, Lu

    2017-08-10

    We describe a closed-loop holographic laser adaptive optics system (HLAOS) based on a holographic wavefront sensor (HWFS) and 21-element continuous-surface piezoelectric deformable mirror (DM). The principle behind HWFSs is described, and then the response sensitivity and crosstalk effect on the lowest 12 Zernike modes of aberration are analyzed. Next, the wavefront-correction capability of the 21-element DM is analyzed. The closed-loop correction of the HLAOS to a static aberration is then numerically simulated. We report a practical implementation of the HLAOS and compare the aberration-compensation effect with a traditional adaptive optics system based on a 37-unit Shark-Hartmann sensor. The practically relevant parameters are analyzed and the experimental results show that an HLAOS using a piezoelectric DM can achieve a correction capability comparable to that of a traditional adaptive optics system.

  1. Design, construction and testing of holographic PV concentrator modules and construction of a pilot plant for serial production of the holographic optical concentrator system on flexible foils. Follow-up project: Completion of the production process for mass production of large format holographic optical elements on flexible foils for solar technology. Final report; Auslegung, Konstruktion und Test von holographischen PV-Konzentratormodulen und Aufbau einer Pilotanlage zur Serienfertigung der holographischen Konzentratoroptik auf flexiblen Folien. Anschlussvorhaben: Vervollstaendigung der Produktionsverfahren fuer die Serienfertigung von grossformatigen holographischen optischen Elementen auf flexiblen Folien fuer die Solartechnik. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Stojanoff, C.G.; Froehlich, K.; Froening, P.; Schulat, J.; Schuette, H.; Wagemann, E.U.

    1997-06-30

    The aim of the research project is the development of a technique for value for money mass-production of large area holographic focussers made of dichromate gelatine for photo-electrics. The holograms act simultaneously as spectrally dispersing and focussing optical elements, which focus the sunlight in discrete bands on the spectrally matched solar cells. The three marked characteristics of the holographic focussers are the diffraction efficiency, the spectral bandwidth and the central working wavelength. The optimum values of these parameters depend on the variation of the layer thickness and the index of refraction over the aperture of the hologram, and on the ability of the DCG layer to provide great modulation of the index of refraction. Mass-production of large format holographic lenses (transmission holograms) and mirrors (reflection holograms) demands precise coating of the supporting substrate (glass or PET foil) with dichromate gelatine. Mass-production of the holographic lenses requires a matrix hologram with 50% diffraction efficiency and is done with two copier plants developed in the project. (orig./AKF) [Deutsch] Ziel des Forschungsvorhabens ist die Entwicklung einer Technologie fuer die preiswerte serielle Herstellung von grossflaechigen holographischen Konzentratoren in Dichromatgelatine fuer die Photovoltaik. Die Hologramme wirken gleichzeitig als spektral dispergierende und fokussierende optische Elemente, die das Sonnenlicht in diskreten Baendern auf spektral angepasste Solarzellen konzentrieren. Die drei kennzeichnenden Charakteristiken der holographischen Konzentratoren sind die Beugungseffizienz, die spektrale Bandbreite und die zentrale Arbeitswellenlaenge. Die optimalen Werte dieser Parameter sind durch die Variation der Schichtdicke und des Brechnungsindexes ueber die Apertur des Hologramms, sowie durch die Faehigkeit der DCG-Schicht grosse Brechungsindexmodulation zu ermoeglichen, eindeutig bedingt. Die serielle Fertigung der

  2. Polarisation-sensitive optical elements in azobenzene polyesters and peptides

    DEFF Research Database (Denmark)

    Ramanujam, P.S.; Dam-Hansen, Carsten; Berg, Rolf Henrik

    2006-01-01

    In this article, we describe fabrication of polarisation holographic optical elements in azobenzene polyesters. Both liquid crystalline and amorphous side-chain polyesters have been utilised. Diffractive optical elements such as lenses and gratings that are sensitive to the polarisation of the in...

  3. Analysis of the optical parameters of phase holographic gratings

    Directory of Open Access Journals (Sweden)

    Є.О. Тихонов

    2008-03-01

    Full Text Available  Suitability of 2- wave approximation of the coupled waves theory tor description of holographic phase gratings recorded on photopolymer compound ФПК-488 is proved. Using the basic formulas of the theory, main grating optical parameters - a depth of modulation and finished thickness are not measured immediately are determined.

  4. Holographic spectrum-splitting optical systems for solar photovoltaics

    Science.gov (United States)

    Zhang, Deming

    Solar energy is the most abundant source of renewable energy available. The relatively high cost prevents solar photovoltaic (PV) from replacing fossil fuel on a larger scale. In solar PV power generation the cost is reduced with more efficient PV technologies. In this dissertation, methods to improve PV conversion efficiency with holographic optical components are discussed. The tandem multiple-junction approach has achieved very high conversion efficiency. However it is impossible to manufacture tandem PV cells at a low cost due to stringent fabrication standards and limited material types that satisfy lattice compatibility. Current produced by the tandem multi-junction PV cell is limited by the lowest junction due to series connection. Spectrum-splitting is a lateral multi-junction concept that is free of lattice and current matching constraints. Each PV cell can be optimized towards full absorption of a spectral band with tailored light-trapping schemes. Holographic optical components are designed to achieve spectrum-splitting PV energy conversion. The incident solar spectrum is separated onto multiple PV cells that are matched to the corresponding spectral band. Holographic spectrum-splitting can take advantage of existing and future low-cost technologies that produces high efficiency thin-film solar cells. Spectrum-splitting optical systems are designed and analyzed with both transmission and reflection holographic optical components. Prototype holograms are fabricated and high optical efficiency is achieved. Light-trapping in PV cells increases the effective optical path-length in the semiconductor material leading to improved absorption and conversion efficiency. It has been shown that the effective optical path length can be increased by a factor of 4n2 using diffusive surfaces. Ultra-light-trapping can be achieved with optical filters that limit the escape angle of the diffused light. Holographic reflection gratings have been shown to act as angle

  5. Accelerated optical holographic recording using bis-DNO

    DEFF Research Database (Denmark)

    Rasmussen, Palle H.; Ramanujam, P.S.; Hvilsted, Søren

    1999-01-01

    The design, synthesis and optical holographic recording properties of bis-DNO are reported. Bis-DNO is composed of two identical azobenzene oligoornithine segments (DNO) connected via a dipeptide linker. The two segments were assembled in a parallel fashion at the two amino groups of the dipeptide...... linker by Merrifield synthesis. Surprisingly, the response time of films of bis-DNOs was found to be much faster than that of their linear counterparts. (C) 1999 Elsevier Science Ltd. All rights reserved....

  6. Read-only high accuracy volume holographic optical correlator

    Science.gov (United States)

    Zhao, Tian; Li, Jingming; Cao, Liangcai; He, Qingsheng; Jin, Guofan

    2011-10-01

    A read-only volume holographic correlator (VHC) is proposed. After the recording of all of the correlation database pages by angular multiplexing, a stand-alone read-only high accuracy VHC will be separated from the VHC recording facilities which include the high-power laser and the angular multiplexing system. The stand-alone VHC has its own low power readout laser and very compact and simple structure. Since there are two lasers that are employed for recording and readout, respectively, the optical alignment tolerance of the laser illumination on the SLM is very sensitive. The twodimensional angular tolerance is analyzed based on the theoretical model of the volume holographic correlator. The experimental demonstration of the proposed read-only VHC is introduced and discussed.

  7. Holographic deep learning for rapid optical screening of anthrax spores.

    Science.gov (United States)

    Jo, YoungJu; Park, Sangjin; Jung, JaeHwang; Yoon, Jonghee; Joo, Hosung; Kim, Min-Hyeok; Kang, Suk-Jo; Choi, Myung Chul; Lee, Sang Yup; Park, YongKeun

    2017-08-01

    Establishing early warning systems for anthrax attacks is crucial in biodefense. Despite numerous studies for decades, the limited sensitivity of conventional biochemical methods essentially requires preprocessing steps and thus has limitations to be used in realistic settings of biological warfare. We present an optical method for rapid and label-free screening of Bacillus anthracis spores through the synergistic application of holographic microscopy and deep learning. A deep convolutional neural network is designed to classify holographic images of unlabeled living cells. After training, the network outperforms previous techniques in all accuracy measures, achieving single-spore sensitivity and subgenus specificity. The unique "representation learning" capability of deep learning enables direct training from raw images instead of manually extracted features. The method automatically recognizes key biological traits encoded in the images and exploits them as fingerprints. This remarkable learning ability makes the proposed method readily applicable to classifying various single cells in addition to B. anthracis, as demonstrated for the diagnosis of Listeria monocytogenes, without any modification. We believe that our strategy will make holographic microscopy more accessible to medical doctors and biomedical scientists for easy, rapid, and accurate point-of-care diagnosis of pathogens.

  8. Holographic deep learning for rapid optical screening of anthrax spores

    Science.gov (United States)

    Jo, YoungJu; Park, Sangjin; Jung, JaeHwang; Yoon, Jonghee; Joo, Hosung; Kim, Min-hyeok; Kang, Suk-Jo; Choi, Myung Chul; Lee, Sang Yup; Park, YongKeun

    2017-01-01

    Establishing early warning systems for anthrax attacks is crucial in biodefense. Despite numerous studies for decades, the limited sensitivity of conventional biochemical methods essentially requires preprocessing steps and thus has limitations to be used in realistic settings of biological warfare. We present an optical method for rapid and label-free screening of Bacillus anthracis spores through the synergistic application of holographic microscopy and deep learning. A deep convolutional neural network is designed to classify holographic images of unlabeled living cells. After training, the network outperforms previous techniques in all accuracy measures, achieving single-spore sensitivity and subgenus specificity. The unique “representation learning” capability of deep learning enables direct training from raw images instead of manually extracted features. The method automatically recognizes key biological traits encoded in the images and exploits them as fingerprints. This remarkable learning ability makes the proposed method readily applicable to classifying various single cells in addition to B. anthracis, as demonstrated for the diagnosis of Listeria monocytogenes, without any modification. We believe that our strategy will make holographic microscopy more accessible to medical doctors and biomedical scientists for easy, rapid, and accurate point-of-care diagnosis of pathogens. PMID:28798957

  9. Realization of an optical interferometer based on holographic optics ...

    Indian Academy of Sciences (India)

    holographic exposures, in conjunction with the common beam O2 for the formation of two different but overlapped .... used for Agfa-Gevaert 8E75HD plates to give high efficiency and low noise grating holograms on H1 and H2. ... of India, New Delhi for the financial support for carrying out this work. One of the authors (AKS) ...

  10. Holographic analysis of dispersive pupils in space--time optics

    Energy Technology Data Exchange (ETDEWEB)

    Calatroni, J.; Vienot, J.C.

    1981-06-01

    Extension of space--time optics to objects whose transparency is a function of the temporal frequency v = c/lambda is examined. Considering the effects of such stationary pupils on white light waves, they are called temporal pupils. It is shown that simultaneous encoding both in the space and time frequency domains is required to record pupil parameters. The space-time impulse response and transfer functions are calculated for a dispersive nonabsorbent material. An experimental method providing holographic recording of the dispersion curve of any transparent material is presented.

  11. Analysis of localized fringes in the holographic optical Schlieren system

    Science.gov (United States)

    Kurtz, R. L.

    1980-01-01

    The relation between localization of interference fringes in classical and holographic interferometry is reviewed and an application of holographic interferometry is considered for which the object is a transparent medium with nonhomogeneous refractive index. The technique is based on the analysis of the optical path length change of the object wave as it propagates through a transparent medium. Phase shifts due to variations of the speed of light within the medium give rise to an interference pattern. The resulting interferogram can be used to determine the physical properties of the medium or transparent object. Such properties include the mass density of fluids, electron densities of plasmas, the temperature of fluids, the chemical species concentration of fluids, and the state of stress in solids. The optical wave used can be either a simple plane or spherical wave, or it may be a complicated spatial wave scattered by a diffusing screen. The mathematical theory on the formation and analysis of localized fringes, the general theoretical concepts used, and a computer code for analysis are included along with the inversion of fringe order data.

  12. Polarization holographic optical recording of a new photochromic diarylethene

    Science.gov (United States)

    Pu, Shouzhi; Miao, Wenjuan; Chen, Anyin; Cui, Shiqiang

    2008-12-01

    A new symmetrical photochromic diarylethene, 1,2-bis[2-methyl-5-(3-methoxylphenyl)-3-thienyl]perfluorocyclopentene (1a), was synthesized, and its photochromic properties were investigated. The compound exhibited good photochromism both in solution and in PMMA film with alternating irradiation by UV/VIS light, and the maxima absorption of its closed-ring isomer 1b are 582 and 599 nm, respectively. Using diarylethene 1b/PMMA film as recording medium and a He-Ne laser (633 nm) for recording and readout, four types of polarization and angular multiplexing holographic optical recording were performed perfectly. For different types of polarization recording including parallel linear polarization recording, parallel circular polarization recording, orthogonal linear polarization recording and orthogonal circular polarization recording,have been accomplished successfully. The results demonstrated that the orthogonal circular polarization recording is the best method for polarization holographic optical recording when this compound was used as recording material. With angular multiplexing recording technology, two high contrast holograms were recorded in the same place on the film with the dimension of 0.78 μm2.

  13. Digital holographic microtomography of fusion spliced optical fibers

    Science.gov (United States)

    Deng, Yating; Xiao, Wen; Ma, Xichao; Pan, Feng

    2017-03-01

    In this paper, we report three-dimensional(3D) measurement results of structural parameters of fusion spliced optical fibers using digital holographic microtomography. A holographic setup in microscopy configuration with the sample-fixed and setup-rotating scheme is established. A series of holograms is recorded from various incident angles. Then the filtered backprojection algorithm is applied to reconstruct the 3D refractive index (RI) distributions of the fusion spliced optical fibers inserted in the index-matching liquid. Experimental results exhibit the internal and external shapes of three kinds of fusion splices between different fibers, including a single-mode fiber(SMF) and a multimode fiber, an SMF and a panda polarization maintaining fiber (Panda PMF), and an SMF and a bow-tie polarization maintaining fiber (Bow-Tie PMF). With 3D maps of RI, it is intuitive to observe internal structural details of fused fibers and evaluate the splicing quality. This paper describes a powerful method for non-invasive microscopic measurement of fiber splicing. Furthermore, it provides the possibility of detecting fiber splicing loss by 3D structures.

  14. Elements of quantum optics

    CERN Document Server

    Meystre, Pierre

    2007-01-01

    Elements of Quantum Optics gives a self-contained and broad coverage of the basic elements necessary to understand and carry out research in laser physics and quantum optics, including a review of basic quantum mechanics and pedagogical introductions to system-reservoir interactions and to second quantization. The text reveals the close connection between many seemingly unrelated topics, such as probe absorption, four-wave mixing, optical instabilities, resonance fluorescence and squeezing. It also comprises discussions of cavity quantum electrodynamics and atom optics. The 4th edition includes a new chapter on quantum entanglement and quantum information, as well as added discussions of the quantum beam splitter, electromagnetically induced transparency, slow light, and the input-output formalism needed to understand many problems in quantum optics. It also provides an expanded treatment of the minimum-coupling Hamiltonian and a simple derivation of the Gross-Pitaevskii equation, an important gateway to rese...

  15. Polarization holographic high-density optical data storage in bacteriorhodopsin film.

    Science.gov (United States)

    Yao, Baoli; Ren, Zhiwei; Menke, Neimule; Wang, Yingli; Zheng, Yuan; Lei, Ming; Chen, Guofu; Hampp, Norbert

    2005-12-01

    Optical films containing the genetic variant bacteriorhodopsin BR-D96N were experimentally studied in view of their properties as media for holographic storage. Different polarization recording schemes were tested and compared. The influence of the polarization states of the recording and readout waves on the retrieved diffractive image's intensity and its signal-to-noise ratio were analyzed. The experimental results showed that, compared with the other tested polarization relations during holographic recording, the discrimination between the polarization states of diffracted and scattered light is optimized with orthogonal circular polarization of the recording beams, and thus a high signal-to-noise ratio and a high diffraction efficiency are obtained. Using a He-Ne laser (633 nm, 3 mW) for recording and readout, a spatial light modulator as a data input element, and a 2D-CCD sensor for data capture in a Fourier transform holographic setup, a storage density of 2 x 10(8) bits/cm2 was obtained on a 60 x 42 microm2 area in the BR-D96N film. The readout of encoded binary data was possible with a zero-error rate at the tested storage density.

  16. Fourier transform digital holographic adaptive optics imaging system

    Science.gov (United States)

    Liu, Changgeng; Yu, Xiao; Kim, Myung K.

    2013-01-01

    A Fourier transform digital holographic adaptive optics imaging system and its basic principles are proposed. The CCD is put at the exact Fourier transform plane of the pupil of the eye lens. The spherical curvature introduced by the optics except the eye lens itself is eliminated. The CCD is also at image plane of the target. The point-spread function of the system is directly recorded, making it easier to determine the correct guide-star hologram. Also, the light signal will be stronger at the CCD, especially for phase-aberration sensing. Numerical propagation is avoided. The sensor aperture has nothing to do with the resolution and the possibility of using low coherence or incoherent illumination is opened. The system becomes more efficient and flexible. Although it is intended for ophthalmic use, it also shows potential application in microscopy. The robustness and feasibility of this compact system are demonstrated by simulations and experiments using scattering objects. PMID:23262541

  17. Stretching single DNA molecules to demonstrate high-force capabilities of holographic optical tweezers.

    Science.gov (United States)

    Farré, Arnau; van der Horst, Astrid; Blab, Gerhard A; Downing, Benjamin P B; Forde, Nancy R

    2010-04-01

    The well calibrated force-extension behaviour of single double-stranded DNA molecules was used as a standard to investigate the performance of phase-only holographic optical tweezers at high forces. Specifically, the characteristic overstretch transition at 65 pN was found to appear where expected, demonstrating (1) that holographic optical trap calibration using thermal fluctuation methods is valid to high forces; (2) that the holographic optical traps are harmonic out to >250 nm of 2.1 mum particle displacement; and (3) that temporal modulations in traps induced by the spatial light modulator (SLM) do not affect the ability of optical traps to hold and steer particles against high forces. These studies demonstrate a new high-force capability for holographic optical traps achievable by SLM technologies. ((c) 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim).

  18. Permanent 3D microstructures in a polymeric host created using holographic optical tweezers

    Science.gov (United States)

    Jordan, P.; Clare, H.; Flendrig, L.; Leach, J.; Cooper, J.; Padgett, M.

    2004-05-01

    Permanent 3D microstructures are created within a gel using holographic optical tweezers. The micron-sized particles are arranged in a precise geometry within an appropriate liquid, and become fixed in position upon polymerisation of the surrounding media. The flexibility of the holographic approach enables any structural arrangement to be produced, dependent upon application. We demonstrate the technique by creating structures within a biocompatible host, enabling future applications in biotechnology.

  19. The Volume Holographic Optical Storage Potential in Azobenzene Containing Polymers

    DEFF Research Database (Denmark)

    Hvilsted, Søren; Sanchez, Carlos; Alcalá, Rafael

    2009-01-01

    to be suitable for holographic storage applications. However, they still present several problems, mainly those related with light sensitivity, response time and stability of the stored information. In this article we review the work performed on volume holographic storage using azobenzene containing polymers......Volume holographic data storage is one of the most promising techniques to improve both the storage capacity of devices and the transfer data rate. Among the materials proposed as storage data media, azobenzene containing polymers have received much attention. Some of their properties seem...

  20. Volume polarization holographic recording in thick photopolymer for optical memory.

    Science.gov (United States)

    Lin, Shiuan Huei; Cho, Sheng-Lung; Chou, Shin-Fu; Lin, June Hua; Lin, Chih Min; Chi, Sien; Hsu, Ken Yuh

    2014-06-16

    Based on a vector wave theory of volume holograms, dependence of holographic reconstruction on the polarization states of the writing and reading beams is discussed. It is found that under paraxial approximation the circular polarization holograms provide a better distinction of the reading beams. Characteristics of recording polarization holograms in thick phenanthrenequinone-doped poly(methyl methacrylate) (PQ/PMMA) photopolymer are experimentally investigated. It is found that the circular polarization holographic recording possesses better dynamic range and material sensitivity, and a uniform spatial frequency response over a wide range. The performance is comparable to that of the intensity holographic recording in PQ/PMMA. Based on theoretical analyses and the material properties, a polarization multiplexing holographic memory using circularly polarization recording configuration for increasing storage capacity has been designed and experimentally demonstrated.

  1. Firefly: an optical lithographic system for the fabrication of holographic security labels

    Science.gov (United States)

    Calderón, Jorge; Rincón, Oscar; Amézquita, Ricardo; Pulido, Iván.; Amézquita, Sebastián.; Bernal, Andrés.; Romero, Luis; Agudelo, Viviana

    2016-03-01

    This paper introduces Firefly, an optical lithography origination system that has been developed to produce holographic masters of high quality. This mask-less lithography system has a resolution of 418 nm half-pitch, and generates holographic masters with the optical characteristics required for security applications of level 1 (visual verification), level 2 (pocket reader verification) and level 3 (forensic verification). The holographic master constitutes the main core of the manufacturing process of security holographic labels used for the authentication of products and documents worldwide. Additionally, the Firefly is equipped with a software tool that allows for the hologram design from graphic formats stored in bitmaps. The software is capable of generating and configuring basic optical effects such as animation and color, as well as effects of high complexity such as Fresnel lenses, engraves and encrypted images, among others. The Firefly technology gathers together optical lithography, digital image processing and the most advanced control systems, making possible a competitive equipment that challenges the best technologies in the industry of holographic generation around the world. In this paper, a general description of the origination system is provided as well as some examples of its capabilities.

  2. Laser Setup for Volume Diffractive Optical Elements Recording in Photo-Thermo-Refractive Glass

    Science.gov (United States)

    2016-04-14

    published in non peer-reviewed journals : Final Report: Laser Setup for Volume Diffractive Optical Elements Recording in Photo-Thermo-Refractive Glass...enhancement of lasers brightness and fine spectral filtering. However, further increase of size of holographic optical elements , which are required for high...PROGRAM ELEMENT NUMBER 5b. GRANT NUMBER 5a. CONTRACT NUMBER Form Approved OMB NO. 0704-0188 3. DATES COVERED (From - To) - Approved for Public Release

  3. Stretching single DNA molecules to demonstrate high-force capabilities of holographic optical tweezers

    NARCIS (Netherlands)

    Farré, Arnau; van der Horst, Astrid; Blab, Gerhard A.; Downing, Benjamin P. B.; Forde, Nancy R.

    2010-01-01

    The well calibrated force-extension behaviour of single double-stranded DNA molecules was used as a standard to investigate the performance of phase-only holographic optical tweezers at high forces. Specifically, the characteristic overstretch transition at 65 pN was found to appear where expected,

  4. Calibration of dynamic holographic optical tweezers for force measurements on biomaterials

    NARCIS (Netherlands)

    van der Horst, Astrid; Forde, Nancy R.

    2008-01-01

    Holographic optical tweezers (HOTs) enable the manipulation of multiple traps independently in three dimensions in real time. Application of this technique to force measurements requires calibration of trap stiffness and its position dependence. Here, we determine the trap stiffness of HOTs as they

  5. Holographic tool kit for optical communication beyond orbital angular momentum

    OpenAIRE

    Trichili, Abderrahmen; Rosales-Guzmán, Carmelo; Dudley, Angela; Ndagano, Bienvenu; Salem, Amine Ben; Zghal, Mourad; Forbes, Andrew

    2016-01-01

    Mode division multiplexing (MDM) is mooted as a technology to address future bandwidth issues, and has been successfully demonstrated in free space using spatial modes with orbital angular momentum (OAM). To further increase the data transmission rate, more degrees of freedom are required to form a densely packed mode space. Here we move beyond OAM and demonstrate multiplexing and demultiplexing using both the radial and azimuthal degrees of freedom. We achieve this with a holographic approac...

  6. Towards 3D modelling and imaging of infection scenarios at the single cell level using holographic optical tweezers and digital holographic microscopy.

    Science.gov (United States)

    Kemper, Björn; Barroso, Álvaro; Woerdemann, Mike; Dewenter, Lena; Vollmer, Angelika; Schubert, Robin; Mellmann, Alexander; von Bally, Gert; Denz, Cornelia

    2013-03-01

    The analysis of dynamic interactions of microorganisms with a host cell is of utmost importance for understanding infection processes. We present a biophotonic holographic workstation that allows optical manipulation of bacteria by holographic optical tweezers and simultaneously monitoring of dynamic processes with quantitative multi-focus phase imaging based on self-interference digital holographic microscopy. Our results show that several bacterial cells, even with non-spherical shape, can be aligned precisely on the surface of living host cells and localized reproducibly in three dimensions. In this way a new label-free multipurpose device for modelling and quantitative analysis of infection scenarios at the single cell level is provided. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. New optical architecture for holographic data storage system compatible with Blu-ray Disc™ system

    Science.gov (United States)

    Shimada, Ken-ichi; Ide, Tatsuro; Shimano, Takeshi; Anderson, Ken; Curtis, Kevin

    2014-02-01

    A new optical architecture for holographic data storage system which is compatible with a Blu-ray Disc™ (BD) system is proposed. In the architecture, both signal and reference beams pass through a single objective lens with numerical aperture (NA) 0.85 for realizing angularly multiplexed recording. The geometry of the architecture brings a high affinity with an optical architecture in the BD system because the objective lens can be placed parallel to a holographic medium. Through the comparison of experimental results with theory, the validity of the optical architecture was verified and demonstrated that the conventional objective lens motion technique in the BD system is available for angularly multiplexed recording. The test-bed composed of a blue laser system and an objective lens of the NA 0.85 was designed. The feasibility of its compatibility with BD is examined through the designed test-bed.

  8. An optical method for compensating phase discontinuity in a 360-degree viewable tabletop digital holographic display system

    Science.gov (United States)

    Lim, Yongjun; Hong, Keehoon; Kim, Hayan; Choo, Hyon-gon; Park, Minsik; Kim, Jinwoong

    2017-06-01

    In this paper, we use an optical method for the implementation of spatially-tiled digital micro-mirror devices (DMDs) to expand space bandwidth product in general digital holographic display systems. In concatenating more than two spatial light modulators (SLMs) optically, there may exist both phase discontinuity and amplitude mismatching of hologram images emanating from two adjacent SLMs. To observe and estimate those properties in digital holographic display systems, we adopt quantitative phase imaging technique based on transport of intensity equation.

  9. Biophotopol: A Sustainable Photopolymer for Holographic Data Storage Applications

    Science.gov (United States)

    Ortuño, Manuel; Gallego, Sergi; Márquez, Andrés; Neipp, Cristian; Pascual, Inmaculada; Beléndez, Augusto

    2012-01-01

    Photopolymers have proved to be useful for different holographic applications such as holographic data storage or holographic optical elements. However, most photopolymers have certain undesirable features, such as the toxicity of some of their components or their low environmental compatibility. For this reason, the Holography and Optical Processing Group at the University of Alicante developed a new dry photopolymer with low toxicity and high thickness called biophotopol, which is very adequate for holographic data storage applications. In this paper we describe our recent studies on biophotopol and the main characteristics of this material. PMID:28817008

  10. Optical image encoding based on digital holographic recording on polarization state of vector wave.

    Science.gov (United States)

    Lin, Chao; Shen, Xueju; Xu, Qinzu

    2013-10-01

    We propose and analyze a compact optical image encoder based on the principle of digital holographic recording on the polarization state of a vector wave. The optical architecture is a Mach-Zehnder interferometer with in-line digital holographic recording mechanism. The original image is represented by distinct polarization states of elliptically polarized light. This state of polarization distribution is scrambled and then recorded by a two-step digital polarization holography method with random phase distributed reference wave. Introduction of a rotation key in the object arm and phase keys in the reference arm can achieve the randomization of plaintext. Statistical property of cyphertext is analyzed from confusion and diffusion point of view. Fault tolerance and key sensitivity of the proposed approach are also investigated. A chosen plaintext attack on the proposed algorithm exhibits its high security level. Simulation results that support the theoretical analysis are presented.

  11. Synthesis and optical storage properties of a thiophene-based holographic recording

    DEFF Research Database (Denmark)

    Matharu, Avtar; Jeeva, S.; Huddleston, P.R.

    2007-01-01

    The results of the fabrication and optical data storage characteristics of a novel azothiophene polyester 9 for potential holographic storage are reported. The polyester is derived from an azothiophene diol 1 and diphenyl phthalate 8 via in vacuo melt transesterification. Inclusion of a 5-methoxy-2......-thienyl moiety generates a trans pi-pi* transition centered close to 405 nm. An investigation of the optical data storage characteristics of a solution cast film of azopolyester with a thickness of 65 mm is summarised. The optical anisotropy induced by a 532 nm frequency doubled YAG laser and probed...

  12. Holographic polymer-dispersed liquid crystal memory for optically reconfigurable gate array using subwavelength grating mask.

    Science.gov (United States)

    Ogiwara, Akifumi; Watanabe, Minoru; Mabuchi, Takayuki; Kobayashi, Fuminori

    2011-12-01

    Holographic polymer-dispersed liquid crystal (HPDLC) memory formed by a subwavelength grating (SWG) mask is presented for new optical information processing. The SWG structure in a photomask is formed on the SiO(2) plate using the anisotropic reactive ion etching technique. The configuration contexts for optically reconfigurable gate arrays (ORGAs) are stored in the HPDLC memory by polarization modulation property based on the form birefringence of the SWG plate. The configuration context pattern in the HPDLC memory is reconstructed to write it for the ORGAs under parallel programmability. © 2011 Optical Society of America

  13. Changes in optical properties of electroporated cells as revealed by digital holographic microscopy

    OpenAIRE

    Calin, Violeta L.; Mihailescu, Mona; Mihale, Nicolae; Baluta, Alexandra V.; Kovacs, Eugenia; Savopol, Tudor; Moisescu, Mihaela G.

    2017-01-01

    Changes in optical and shape-related characteristics of B16F10 cells after electroporation were investigated using digital holographic microscopy (DHM). Bipolar rectangular pulses specific for electrochemotherapy were used. Electroporation was performed in an ?off-axis? DHM set-up without using exogenous markers. Two types of cell parameters were monitored seconds and minutes after pulse train application: parameters addressing a specifically defined area of the cell (refractive index and cel...

  14. Photopolymer diffractive optical elements in electronic speckle pattern shearing interferometry

    Science.gov (United States)

    Mihaylova, Emilia; Naydenova, Izabela; Duignan, Barry; Martin, Suzanne; Toal, Vincent

    2006-09-01

    In this paper we present an electronic speckle pattern shearing interferometer using a photopolymer diffractive optical element in the form of a holographic grating, in combination with a ground glass to shear the images. The sheared images on the ground glass are further imaged onto a CCD camera. The distance between the grating and the ground glass can be used to control the shear and to vary the sensitivity of the system. The direction of sensitivity is easily controlled by rotation of the diffraction grating around its normal. Introducing photopolymer holographic gratings in ESPSI gives the advantage of using high aperture optical elements at relatively low cost. The fact that the diffractive optical element is a photopolymer layer on glass substrate with thickness of 2 mm makes for a compact optical system. The system was successfully used for detection of the resonant frequencies of a vibrating object. Most of the published work on vibration analysis is analytical. Very few experimental results are available in the literature. The well known laser Doppler vibrometers (LDV) and accelerometers used for modal analysis are pointwise measurement techniques, although multipoint LDV is available at significant cost. Electronic speckle pattern techniques suitable for experimental detection of the resonant frequencies of vibrating objects are very promising for vibration analysis because they are whole field and non-contact. A finite element model is developed for prediction of the vibration modes of the object under test. Detection of vibrational modes of aluminium diaphragm is demonstrated and compared with the theoretical model. The results obtained are very promising for future application of ESPSI systems with HOEs, for modal analysis. A significant advantage of shearography over electronic speckle pattern interferometry is that ESPSI is relatively insensitive to external disturbances. Another advantage of the proposed system is that it could be easily converted

  15. Changes in optical properties of electroporated cells as revealed by digital holographic microscopy.

    Science.gov (United States)

    Calin, Violeta L; Mihailescu, Mona; Mihale, Nicolae; Baluta, Alexandra V; Kovacs, Eugenia; Savopol, Tudor; Moisescu, Mihaela G

    2017-04-01

    Changes in optical and shape-related characteristics of B16F10 cells after electroporation were investigated using digital holographic microscopy (DHM). Bipolar rectangular pulses specific for electrochemotherapy were used. Electroporation was performed in an "off-axis" DHM set-up without using exogenous markers. Two types of cell parameters were monitored seconds and minutes after pulse train application: parameters addressing a specifically defined area of the cell (refractive index and cell height) and global cell parameters (projected area, optical phase shift profile and dry mass). The biphasic behavior of cellular parameters was explained by water and mannitol dynamics through the electropermeabilized cell membrane.

  16. Changes in optical properties of electroporated cells as revealed by digital holographic microscopy

    Science.gov (United States)

    Calin, Violeta L.; Mihailescu, Mona; Mihale, Nicolae; Baluta, Alexandra V.; Kovacs, Eugenia; Savopol, Tudor; Moisescu, Mihaela G.

    2017-01-01

    Changes in optical and shape-related characteristics of B16F10 cells after electroporation were investigated using digital holographic microscopy (DHM). Bipolar rectangular pulses specific for electrochemotherapy were used. Electroporation was performed in an “off-axis” DHM set-up without using exogenous markers. Two types of cell parameters were monitored seconds and minutes after pulse train application: parameters addressing a specifically defined area of the cell (refractive index and cell height) and global cell parameters (projected area, optical phase shift profile and dry mass). The biphasic behavior of cellular parameters was explained by water and mannitol dynamics through the electropermeabilized cell membrane. PMID:28736667

  17. Optical reconfiguration by anisotropic diffraction in holographic polymer-dispersed liquid crystal memory.

    Science.gov (United States)

    Ogiwara, Akifumi; Watanabe, Minoru

    2012-07-20

    Holographic polymer dispersed liquid crystal (HPDLC) memory is fabricated by a photoinduced phase separation comprised of polymer and liquid crystal (LC) phases using laser light interference exposures. The anisotropic diffraction induced by the alignment of LC in the periodic structure of the HPDLC memory is applied to reconstruct the configuration contexts for the optically reconfigurable gate arrays. Optical reconfiguration for various circuits under parallel programmability is implemented by switching the polarization state of incident light on the HPDLC memory using a spatial light modulator.

  18. Optical diffractometry of highly anisotropic holographic gratings formed by liquid crystal and polymer phase separation.

    Science.gov (United States)

    Kakiuchida, Hiroshi; Tazawa, Masato; Yoshimura, Kazuki; Ogiwara, Akifumi

    2012-12-01

    Optical diffractometry is proposed as a practical method of quantitatively analyzing the microscopic structural origins of a wide range of highly efficient and linearly polarized optical diffraction grating produced from holographic polymer-dispersed liquid crystal. The structure is organized by a spatially periodical distribution of submicrometer-scale liquid crystal (LC) droplets in a polymer matrix. Six independent Bragg diffraction spectra were obtained at two orthogonal polarization states at temperatures below, at, and above the nematic-to-isotropic phase transition point. These spectra were simultaneously analyzed by employing anisotropic diffraction theory under the restraint of a simple and widely useful structural model constructed on the basis of the previously reported microscopic observations. The refractive indices of spatially periodic LC- and polymer-rich phases were analyzed using Cauchy's equation as a function of optical wavelength. The present diffractometry was demonstrated for a variety of holographic structures, and the structural parameters were discussed such as the filling ratio of LC droplets to polymer matrix, the orientational order in the droplets, and the thermo-optic properties in the LC droplets. Furthermore, the higher order Bragg diffractions were measured and discussed. The proposed method was examined in consistency by comparisons with polarizing optical microscopy and scanning electron microscopy.

  19. Multiplexed Holographic Optical Data Storage In Thick Bacteriorhodopsin Films

    Science.gov (United States)

    Downie, John D.; Timucin, Dogan A.; Gary, Charles K.; Ozcan, Meric; Smithey, Daniel T.; Crew, Marshall

    1998-01-01

    The optical data storage capacity of photochromic bacteriorhodopsin films is investigated by means of theoretical calculations, numerical simulations, and experimental measurements on sequential recording of angularly multiplexed diffraction gratings inside a thick D85N BR film.

  20. Dynamic measurements and simulations of airborne picolitre-droplet coalescence in holographic optical tweezers.

    Science.gov (United States)

    Bzdek, Bryan R; Collard, Liam; Sprittles, James E; Hudson, Andrew J; Reid, Jonathan P

    2016-08-07

    We report studies of the coalescence of pairs of picolitre aerosol droplets manipulated with holographic optical tweezers, probing the shape relaxation dynamics following coalescence by simultaneously monitoring the intensity of elastic backscattered light (EBL) from the trapping laser beam (time resolution on the order of 100 ns) while recording high frame rate camera images (time resolution droplet coalescence in holographic optical traps; assign the origin of key features in the time-dependent EBL intensity; and validate the use of the EBL alone to precisely determine droplet surface tension and viscosity. For low viscosity droplets, two sequential processes are evident: binary coalescence first results from the overlap of the optical traps on the time scale of microseconds followed by the recapture of the composite droplet in an optical trap on the time scale of milliseconds. As droplet viscosity increases, the relaxation in droplet shape eventually occurs on the same time scale as recapture, resulting in a convoluted evolution of the EBL intensity that inhibits quantitative determination of the relaxation time scale. Droplet coalescence was simulated using a computational framework to validate both experimental approaches. The results indicate that time-dependent monitoring of droplet shape from the EBL intensity allows for robust determination of properties such as surface tension and viscosity. Finally, the potential of high frame rate imaging to examine the coalescence of dissimilar viscosity droplets is discussed.

  1. Holographic toolkit for optical communication beyond orbital angular momentum

    CSIR Research Space (South Africa)

    Rosales-Guzman, C

    2016-09-01

    Full Text Available -Te´le´com/Te´le´com SudParis, 9 rue Charles Fourier, 91011 Evry, France ABSTRACT Current optical communication technologies are predicted to face a bandwidth capacity limit in the near future. The nature of the limitation is fundamental rather than technological... momentum multiplexing.,” Nat. Commun. 5, 4876 (2014). [20] Torres, J. P., “Optical communications: Multiplexing twisted light,” Nature Photonics 6(7), 420–422 (2012). [21] Zhao, N., Li, X., Li, G., and Kahn, J. M., “Capacity limits of spatially multiplexed...

  2. Calcium effect on membrane of an optically trapped erythrocyte studied by digital holographic microscopy

    Science.gov (United States)

    Farzam Rad, Vahideh; Tavakkoli, Rahim; Moradi, Ali-Reza; Anand, Arun; Javidi, Bahram

    2017-08-01

    The calcium level in blood affects the morphological and rheological properties of red blood cell (RBC) membranes. In this paper, we present an integrated optical system for a single cell study of hypercalcemia. The system consists of holographic optical tweezers and blinking optical tweezers, for photo-damage-free immobilization of the cells, combined with digital holographic microscopy, for quantitative analysis and live visualization of the cells. Digital holograms were recorded live, while the concentration of calcium ions in the buffer is gradually increased. Full morphometric data of RBCs were obtained by numerical reconstruction of the holograms. Morphological changes are expressed in terms of various parameters such as root mean square, skewness, and kurtosis of the cell membrane thickness distribution. We have observed dramatic changes of the cell morphology, which are attributed to the formation of calcium-induced hydrophobic aggregates of phospholipid molecules in the RBC membrane, resulting in a net change in membrane rigidity. Our experimental results are in agreement with previous biological studies of RBCs under the Ca2+ influence.

  3. Holographic Optical Element-Based Laser Diode Source Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA is seeking improved methods of rapid prototyping, which are best achieved by using directed metal deposition (DMD). Current DMD systems consume a great deal of...

  4. Holographic reconstruction of sound fields based on the acousto-optic effect

    DEFF Research Database (Denmark)

    Fernandez Grande, Efren; Torras Rosell, Antoni; Jacobsen, Finn

    2013-01-01

    yielding a full characterization of the sound field. In this study, a direct projection of the Radon transform from one plane to another and into the space domain, based on an elementary wave expansion is proposed. The relationship between the Radon and the wavenumber domains is examined......Recent studies have shown that it is possible to measure a sound field using acousto-optic tomography. Theacousto-optic effect, i.e., the interaction between sound and light, can be used to measure an arbitrary soundfield by scanning it with a laser Doppler vibrometer (LDV) over an aperture......; This can be described mathematically by means of the Radon transform of the acoustic field. An interesting feature of this Measurement technique is that the spatial characteristics of the sound field are captured in the measurement. Therefore, the technique has an inherent holographic potential, implicitly...

  5. Construction of a high resolution microscope with conventional and holographic optical trapping capabilities.

    Science.gov (United States)

    Butterfield, Jacqualine; Hong, Weili; Mershon, Leslie; Vershinin, Michael

    2013-04-22

    High resolution microscope systems with optical traps allow for precise manipulation of various refractive objects, such as dielectric beads (1) or cellular organelles (2,3), as well as for high spatial and temporal resolution readout of their position relative to the center of the trap. The system described herein has one such "traditional" trap operating at 980 nm. It additionally provides a second optical trapping system that uses a commercially available holographic package to simultaneously create and manipulate complex trapping patterns in the field of view of the microscope (4,5) at a wavelength of 1,064 nm. The combination of the two systems allows for the manipulation of multiple refractive objects at the same time while simultaneously conducting high speed and high resolution measurements of motion and force production at nanometer and piconewton scale.

  6. Analysis of holographic photopolymers for integrated optical systems via quantitative phase microscopy

    Science.gov (United States)

    Glugla, David J.; Alim, Marvin D.; Chosy, Madeline B.; Sullivan, Amy C.; McLeod, Robert R.

    2017-05-01

    Optically-driven diffusion of high refractive index molecules within a transparent thermoset polymer matrix is a promising platform for hybrid optics that combines a wide range of optical structures from large scale holograms to micron-scale gradient index waveguides in a single integrated optical system. Design of such a system requires characterization of the optical response of the material at a wide range of spatial scales and intensities. While holographic analysis of the photopolymers is appropriate to probe the smaller spatial scales and lower intensity optical response, quantitative phase mapping of isolated structures is needed to probe the response to the higher intensities and lower spatial frequencies used in direct write lithography of waveguides. We apply the transport of intensity equation (TIE) to demonstrate quantitative refractive index measurements of 10 μm-scale localized gradient index structures written into diffusive photopolymer materials using both single- and two-photon polymerization. These quantitative measurements allow us to study the effect of different exposure conditions and material parameters such as writing beam power, exposure time, and wt% loading of the writing monomer on the overall profile of the refractive index structure. We use these measurements to probe the time scales over which diffusion is significant, and take advantage of the diffusion of monomer with a multiple-write scheme that achieves a peak refractive index contrast of 0.025.

  7. Temperature dependence of optical anisotropy of holographic polymer-dispersed liquid crystal transmission gratings.

    Science.gov (United States)

    Drevensek-Olenik, I; Fally, M; Ellabban, M A

    2006-08-01

    We measured the angular dependence of the 0th, +/-1 st, and +/-2 nd optical diffraction orders from a 50 microm thick transmission grating recorded in a UV-curable holographic polymer-dispersed liquid crystal (HPDLC) made from commercially available constituents. The analysis was performed for two orthogonal polarizations of the probe beams. The emphasis was laid on the temperature dependence of the grating anisotropy. Above the nematic-isotropic phase transition, the grating is optically isotropic. At lower temperatures the grating strength for the optical polarization perpendicular to the grating vector decreases with decreasing temperature, while for orthogonal polarization it increases with decreasing temperature. As a consequence, a regime of diffraction with strongly overmodulated gratings is observed. Our investigations indicate that the anisotropy of the refractive-index modulation scales with the optical anisotropy of the liquid crystal medium forming the phase-separated domains. We further demonstrate that light scattering effects, which are profound only in the nematic phase, must not be neglected and can be taken into account via a Lorentzian line-shape broadening of the probing wave vector directions in the framework of the diffraction theory for anisotropic optical phase gratings.

  8. Combining Holographic Optical Tweezers with Upconversion Luminescence Encoding: Imaging-Based Stable Suspension Array for Sensitive Responding of Dual Cancer Biomarkers.

    Science.gov (United States)

    Li, Cheng-Yu; Cao, Di; Qi, Chu-Bo; Kang, Ya-Feng; Song, Chong-Yang; Xu, Dang-Dang; Zheng, Bei; Pang, Dai-Wen; Tang, Hong-Wu

    2018-02-06

    Establishment of a stable analytical methodology with high-quality results is an urgent need for screening cancer biomarkers in early diagnosis of cancer. In this study, we incorporate holographic optical tweezers with upconversion luminescence encoding to design an imageable suspension array and apply it to conduct the detection of two liver cancer related biomarkers, carcinoembryonic antigen and alpha fetal protein. This bead-based assay is actualized by forming a bead array with holographic optical tweezers and synchronously exciting the upconversion luminescence of corresponding trapped complex beads fabricated with a simple one-step sandwich immunological recognition. Owing to the fact that these flowing beads are stably trapped in the focal plane of the objective lens which tightly converges the array of the laser beams by splitting a 980 nm beam using a diffraction optical element, a fairly stable excitation condition is achieved to provide reliable assay results. By further taking advantage of the eminent encoding capability of upconversion nanoparticles and the extremely low background signals of anti-Stokes luminescence, the two targets are well-identified and simultaneously detected with quite sound sensitivity and specificity. Moreover, the potential on-demand clinical application is presented by employing this approach to respond the targets toward complex matrices such as serum and tissue samples, offering a new alternative for cancer diagnosis technology.

  9. Systems Issues Pertaining to Holographic Optical Data Storage in Thick Bacteriorhodopsin Films

    Science.gov (United States)

    Downie, John D.; Timucin, Dogan A.; Gary, Charles K.; Oezcan, Meric; Smithey, Daniel T.; Crew, Marshall; Lau, Sonie (Technical Monitor)

    1998-01-01

    The optical data storage capacity and raw bit-error-rate achievable with thick photochromic bacteriorhodopsin (BR) films are investigated for sequential recording and read- out of angularly- and shift-multiplexed digital holograms inside a thick blue-membrane D85N BR film. We address the determination of an exposure schedule that produces equal diffraction efficiencies among each of the multiplexed holograms. This exposure schedule is determined by numerical simulations of the holographic recording process within the BR material, and maximizes the total grating strength. We also experimentally measure the shift selectivity and compare the results to theoretical predictions. Finally, we evaluate the bit-error-rate of a single hologram, and of multiple holograms stored within the film.

  10. Image fidelity improvement in digital holographic microscopy using optical phase conjugation

    Science.gov (United States)

    Chan, Huang-Tian; Chew, Yang-Kun; Shiu, Min-Tzung; Chang, Chi-Ching

    2018-01-01

    With respect to digital holography, techniques in suppressing noises derived from reference arm are maturely developed. However, techniques for the object counterpart are not being well developed. Optical phase conjugation technique was believed to be a promising method for this interest. A 0°-cut BaTiO3 photorefractive crystal was involved in self-pumped phase conjugation scheme, and was employed to in-line digital holographic microscopy, in both transmission-type and reflection-type configuration. On pure physical compensation basis, results revealed that the image fidelity was improved substantially with 2.9096 times decrease in noise level and 3.5486 times increase in the ability to discriminate noise on average, by suppressing the scattering noise prior to recording stage.

  11. Holographic and single beam optical manipulation of hyphal growth in filamentous fungi

    Science.gov (United States)

    Burnham, D. R.; Wright, G. D.; Read, N. D.; McGloin, D.

    2007-08-01

    We report on the ability of holographic light fields to alter the normal growth patterns of filamentous fungi. The light fields are produced on a microscopic scale by borrowing methods from the field of optical tweezers, but without the aim of directly trapping or manipulating objects. Extended light fields are shown to redirect and constrict hyphal tip growth, and induce hyphal branching in a highly reproducible manner. The merits of using discrete and continuous light fields produced using a spatial light modulator are discussed and the use of three-dimensional 'pseudowalls' of light to control the growth patterns is reported. We also demonstrate the dependence of hyphal tip growth on the wavelength of light, finding that less power is needed at shorter wavelengths to effect changes in the growth dynamics of fungal hyphae.

  12. Semi-automated sorting using holographic optical tweezers remotely controlled by eye/hand tracking camera

    Science.gov (United States)

    Tomori, Zoltan; Keša, Peter; Nikorovič, Matej; Kaůka, Jan; Zemánek, Pavel

    2016-12-01

    We proposed the improved control software for the holographic optical tweezers (HOT) proper for simple semi-automated sorting. The controller receives data from both the human interface sensors and the HOT microscope camera and processes them. As a result, the new positions of active laser traps are calculated, packed into the network format and sent to the remote HOT. Using the photo-polymerization technique, we created a sorting container consisting of two parallel horizontal walls where one wall contains "gates" representing a place where the trapped particle enters into the container. The positions of particles and gates are obtained by image analysis technique which can be exploited to achieve the higher level of automation. Sorting is documented on computer game simulation and the real experiment.

  13. Electronic speckle pattern shearing interferometry using photopolymer diffractive optical elements for vibration measurements

    Science.gov (United States)

    Mihaylova, Emilia M.; Naydenova, Izabela; Martin, Suzanne; Toal, Vincent

    2004-06-01

    Electronic speckle pattern shearing interferometry (ESPSI) is superior to Electronic speckle pattern interferometry (ESPI) when strain distribution, arising from object deformation or vibration, need to be measured. This is because shearography provides data directly related to the spatial derivatives of the displacement. Further development of ESPSI systems could be beneficial for wider application to the measurement of mechanical characteristics of vibrating objects. Two electronic speckle pattern shearing interferometers (ESPSI) suitable for vibration measurements are presented. In both ESPSI systems photopolymer holographic gratings are used to shear the images and to control the size of the shear. The holographic gratings are recorded using an acrylamide-based photopolymer material. Since the polymerization process occurs during recording, the holograms are produced without any development or processing. The ESPSI systems with photopolymer holographic gratings are simple and compact. Introducing photopolymer holographic gratings in ESPSI gives the advantage of using high aperture optical elements at relatively low cost. It is demonstrated that both ESPSI system can be used for vibration measurements. The results obtained are promising for future applications of the systems for modal analysis.

  14. Measurement of spatial refractive index distributions of fusion spliced optical fibers by digital holographic microtomography

    Science.gov (United States)

    Pan, Feng; Deng, Yating; Ma, Xichao; Xiao, Wen

    2017-11-01

    Digital holographic microtomography is improved and applied to the measurements of three-dimensional refractive index distributions of fusion spliced optical fibers. Tomographic images are reconstructed from full-angle phase projection images obtained with a setup-rotation approach, in which the laser source, the optical system and the image sensor are arranged on an optical breadboard and synchronously rotated around the fixed object. For retrieving high-quality tomographic images, a numerical method is proposed to compensate the unwanted movements of the object in the lateral, axial and vertical directions during rotation. The compensation is implemented on the two-dimensional phase images instead of the sinogram. The experimental results exhibit distinctly the internal structures of fusion splices between a single-mode fiber and other fibers, including a multi-mode fiber, a panda polarization maintaining fiber, a bow-tie polarization maintaining fiber and a photonic crystal fiber. In particular, the internal structure distortion in the fusion areas can be intuitively observed, such as the expansion of the stress zones of polarization maintaining fibers, the collapse of the air holes of photonic crystal fibers, etc.

  15. Design and simulation of fast-pulse control signal generator for the electro-holographic optical switch

    Science.gov (United States)

    Song, Yansheng; Ji, Jiarong; Dou, Wenhua; Wen, Changli

    2010-10-01

    The electro-holographic optical switch based on the quadratic electro-optic effect in paraelectric photorefractive crystals requires driving signal of fast pulse. The pulse rise/fall time and voltage are 10-10-10-8s and 102-103V, respectively, depending on the applications. A pulse control signal generator for the electro-holographic optical switch was designed and simulated. Considering the integration of pulse signal generator and the switch, the circuit employs three stages compact Marx generators utilizing parallel avalanche bipolar junction transistors series operated in the avalanche mode in each stage. These transistors and the crystals are mounted on printed circuit board. According to the simulated results, the output voltage ranged from 1.2kV to 1.5kV. The rise/fall time of this pulse is less than 3 nanoseconds. The pulse width is 20 nanoseconds, and trigger delay is about 1 nanosecond. The repetition rate is less than 50MHz which can be increased by reducing the pulse width of the trigger. The simulation results indicate that the pulse control signals from the designed generator can match the application of electro-holographic optical switch well.

  16. Holographic reflector for reflective LCDs

    Science.gov (United States)

    Sato, Atsushi; Murillo-Mora, Luis M.; Iwata, Fujio

    1997-05-01

    We describe a new holographic optical element to improve the image's quality of a reflective liquid crystal displays (LCDs). This new holographic reflector consists basically of 2 layers: a volume type transmission hologram layer and a metallic reflection layer. Compared with conventional reflectors for reflective LCDs, a high optical efficiency can be obtained because the hologram is able to concentrate the reflected light to the observer's eyes. Also, it avoids the problems of glare in the LCDs by deviating the reflected incident light (used for display) away from the direction of the direct reflection light. The transmission hologram's low wavelength selectivity permits us to obtain a near white color reflector for reflective LCDs which for multiple applications is the preferable color for the background.

  17. From the surface to volume: concepts for the next generation of optical-holographic data-storage materials.

    Science.gov (United States)

    Bruder, Friedrich-Karl; Hagen, Rainer; Rölle, Thomas; Weiser, Marc-Stephan; Fäcke, Thomas

    2011-05-09

    Optical data storage has had a major impact on daily life since its introduction to the market in 1982. Compact discs (CDs), digital versatile discs (DVDs), and Blu-ray discs (BDs) are universal data-storage formats with the advantage that the reading and writing of the digital data does not require contact and is therefore wear-free. These formats allow convenient and fast data access, high transfer rates, and electricity-free data storage with low overall archiving costs. The driving force for development in this area is the constant need for increased data-storage capacity and transfer rate. The use of holographic principles for optical data storage is an elegant way to increase the storage capacity and the transfer rate, because by this technique the data can be stored in the volume of the storage material and, moreover, it can be optically processed in parallel. This Review describes the fundamental requirements for holographic data-storage materials and compares the general concepts for the materials used. An overview of the performance of current read-write devices shows how far holographic data storage has already been developed. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Wavelength techniques for digital holographic memories

    Science.gov (United States)

    Lande, David

    Holographic storage is a technique to store and retrieve information spread out in a volume, in contrast to current optical devices which store information locally on a surface. It provides for parallel page-by-page recording and readout of data instead of the usual serial, bit-by-bit, technique, and offers much higher diffraction-limited capacity. Success in the development of a competitive holographic storage device then depends on its cost, compactness and reliability. Since the first digital demonstrations, considerable effort by various groups has been spent in the development of high performance, practical holographic systems. This thesis presents several contributions toward this goal, suitable for holographic storage in lithium niobate and other applicable media. An intuitive explanation of volume holography is given, and Fourier analysis is used to derive the diffraction- limited capacity of digital storage in the form of elementary refractive index gratings. The physics of photorefractive materials, which are commonly used in holographic recording, is then presented, along with an established phenomenological model for grating formation. Following an analysis of imaging and multiplexing, a completely automated storage system implementing wavelength-multiplexed holography is described and evaluated, highlighting the feasibility of systems with fewer optical and mechanical components. The volatility of information in photorefractive media is then addressed by a demonstration of optical fixing, a technique based on two-photon recording mechanisms. Such an all-optical technique removes the need for heating elements, high voltages, or other post-processing elements currently used in non-volatile systems. Two-photon recording is also used to modulate, or apodize, the amplitude of volume gratings within the crystal bulk, providing a flexible technique to reduce cross-talk noise between stored pages and optimize the system capacity. Finally, simulations of

  19. Holographic Spectroscopy for Rapid Electron Bunch Analysis: Development of an Instrument with THZ Resolved Optical Gating

    Energy Technology Data Exchange (ETDEWEB)

    Sievers, Albert

    2011-10-28

    The main thrust of our project was to apply the concepts of holographic spectroscopy, developed earlier in the visible and near IR spectral regions for satellite mapping, to the THz region in order to measure the spectral signature of the coherent radiation emanating from a relativistic electron bunch to obtain the bunch length itself. There were four major discoveries. (1) In the course of this ground-breaking work we developed and built the first static THz interferometer suitable for the realization of such a holographic Fourier transform spectrometer. Experimental tests and analysis of the observed results have provided the necessary foundation for future development of THz detector arrays optimized for spectroscopic applications. (2) Since such detectors do not exist at the present time our next effort was to find an alternative approach. We explored the electro-optic (EO) detection of the THz pulse using the short pulse of a visible diode laser synchronized to the bunch with the long-term goal aimed at single bunch measurement capability. The main hurdle was found to be the parasitic scattering of the diode radiation in the EO medium. By using the optical Fourier transform of the THz interference pattern the effects of this background were suppressed enough to obtain the spectrum using multiple shot acquisition. During our experiments at the FLASH facility at DESY we determined that for single bunch measurement capability the diode laser has to be able to produce sub 100 ps pulses with peak power of at least 1 W. Since these parameters are quite feasible at the current stage of diode laser science this combination of techniques can be used for single shot measurement of a short electron bunch. (3) In carrying out the above effort a simpler measurement possibility was uncovered involving the visible/nearIR pulse of incoherent radiation produced by the same bunch. This observation made possible the cross-correlation of the THz coherent and visible incoherent

  20. Analysis of thermally loaded transmissive optical elements

    Science.gov (United States)

    Michels, Gregory J.; Genberg, Victor L.

    2013-09-01

    The performance metrics of many optical systems are affected by temperature changes in the system through different physical phenomena. Temperature changes cause materials to expand and contract causing deformations of optical components. The resulting stress states in transmissive optics can cause refractive changes that can affect optical performance. In addition, the temperature changes themselves can cause changes in the refractive properties of transmissive optics. Complex distributions of refractive indices that relate to the thermal profile, the thermo-optic refractive index profile, within the optical media can be predicted by the finite element method. One current technique for representing such refractive index profiles is through the generation of optical path difference (OPD) maps by integration along integration paths. While computationally efficient, this method has limitations in its ability to represent the effect of the index changes for rays associated with multiple field points and multiple wavelengths. A more complete representation of the thermo-optic refractive index profile may be passed to the optical analysis software through the use of a user defined gradient index material. The interface consists of a dynamic link library (DLL) which supplies indices of refraction to a user defined gradient index lens as ray tracing calculations are being performed. The DLL obtains its refractive index description from a database derived from the thermal analysis of the optics. This process allows optical analysis software to perform accurate ray tracing for an arbitrary refractive index profile induced by changes in temperature.

  1. Fully updatable holographic stereogram display device based on organic monolithic compound

    Science.gov (United States)

    Tsutsumi, Naoto; Kinashi, Kenji; Tada, Kazuhiro; Fukuzawa, Kodai; Kawabe, Yutaka

    2014-03-01

    Following former report in Optics Express 21, 19880, (2013), we present here a prototype mobile updatable holographic display system using a holographic stereographic technique with a transparent optical device of PMMA doped organic monolithic compound. 50 or 100 elemental holograms which are a series of pictures of object took from different angles can completely reproduce updatable entire hologram of object. Immediately after recording one holographic stereogram, another holographic stereogram can be over-recorded without erasing. Recorded updatable 3D hologram can be viewable for up to a couple of hours directly on a device without any eye glasses and other tools to magnify images. Hologram can be easily refreshed by overwriting without erasing process. Large size and improved holographic device is also presented.

  2. Optical and electric properties of dynamic holographic gratings with arbitrary contrast

    DEFF Research Database (Denmark)

    Kukhtarev, Nickolai; Buchhave, Preben; Lyuksyutov, Sergei

    1997-01-01

    An analytical solution of the photoconductive material equations for dynamic holographic gratings of arbitrary contrast has been obtained. A method of measuring high-contrast correlation functions has been suggested and tested experimentally. Good agreement with the analytical expression for the ......An analytical solution of the photoconductive material equations for dynamic holographic gratings of arbitrary contrast has been obtained. A method of measuring high-contrast correlation functions has been suggested and tested experimentally. Good agreement with the analytical expression...

  3. Investigation on cytoskeleton dynamics for no-adherent cells subjected to point-like stimuli by digital holographic microscopy and holographic optical trapping

    Science.gov (United States)

    Miccio, Lisa; Merola, Francesco; Memmolo, Pasquale; Mugnano, Martina; Fusco, Sabato; Netti, Paolo A.; Ferraro, Pietro

    2014-05-01

    Guiding, controlling and studying cellular functions are challenging themes in the biomedical field, as they are fundamental prerequisites for new therapeutic strategies from tissue regeneration to controlled drug delivery. In recent years, multidisciplinary studies in nanotechnology offer new tools to investigate important biophysical phenomena in response to the local physical characteristics of the extracellular environment, some examples are the mechanisms of cell adhesion, migration, communication and differentiation. Indeed for reproducing the features of the extracellular matrix in vitro, it is essential to develop active devices that evoke as much as possible the natural cellular environment. Our investigation is in the framework of studying and clarifying the biophysical mechanisms of the interaction between cells and the microenvironment in which they exist. We implement an optical tweezers setup to investigate cell material interaction and we use Digital Holography as non-invasive imaging technique in microscopy. We exploit Holographic Optical Tweezers arrangement in order to trap and manage functionalized micrometric latex beads to induce mechanical deformation in suspended cells. A lot of papers in literature examine the dynamics of the cytoskeleton when cells adhere on substrates and nowadays well established cell models are based on such research activities. Actually, the natural cell environment is made of a complex extracellular matrix and the single cell behavior is due to intricate interactions with the environment and are strongly correlated to the cell-cell interactions. Our investigation is devoted to understand the inner cell mechanism when it is mechanically stressed by point-like stimulus without the substrate influence.

  4. Geometrical camera calibration with diffractive optical elements.

    Science.gov (United States)

    Bauer, M; Griessbach, D; Hermerschmidt, A; Krüger, S; Scheele, M; Schischmanow, A

    2008-12-08

    Traditional methods for geometrical camera calibration are based on calibration grids or single pixel illumination by collimated light. A new method for geometrical sensor calibration by means of diffractive optical elements (DOE) in connection with a laser beam equipment is presented. This method can be especially used for 2D-sensor array systems but in principle also for line scanners. (c) 2008 Optical Society of America

  5. Multifunctional diffractive optical elements for the generation of higher order Bessel-like-beams

    Science.gov (United States)

    Vijayakumar, A.; Bhattacharya, Shanti

    2015-01-01

    Higher Order Bessel Beams (HOBBs) have many useful applications in optical trapping experiments. The generation of HOBBs is achieved by illuminating an axicon by a Laguerre-Gaussian beam generated by a spiral phase plate. It can also be generated by a Holographic Optical Element (HOE) containing the functions of the Spiral Phase Plate (SPP) and an axicon. However the HOBB's large focal depth reduces the intensity at each plane. In this paper, we propose a multifunctional Diffractive Optical Element (DOE) containing the functions of a SPP, axicon and a Fresnel Zone Lens (FZL) to generate higher efficiency higher order Bessel-like-beams with a reduced focal depth. The functions of a SPP and a FZL were combined by shifting the location of zones of FZL in a spiral fashion. The resulting element is combined with an axicon by modulo-2π phase addition technique. The final composite element contains the functions of SPP, FZL and axicon. The elements were designed with different topological charges and fabricated using electron beam direct writing. The elements were tested and the generation of a higher order Bessel-like-beams is confirmed. Besides, the elements also generated high quality donut beams at two planes equidistant from the focal plane of the FZL.

  6. Image scale measurement with correlation filters in a volume holographic optical correlator

    Science.gov (United States)

    Zheng, Tianxiang; Cao, Liangcai; He, Qingsheng; Jin, Guofan

    2013-08-01

    A search engine containing various target images or different part of a large scene area is of great use for many applications, including object detection, biometric recognition, and image registration. The input image captured in realtime is compared with all the template images in the search engine. A volume holographic correlator is one type of these search engines. It performs thousands of comparisons among the images at a super high speed, with the correlation task accomplishing mainly in optics. However, the inputted target image always contains scale variation to the filtering template images. At the time, the correlation values cannot properly reflect the similarity of the images. It is essential to estimate and eliminate the scale variation of the inputted target image. There are three domains for performing the scale measurement, as spatial, spectral and time domains. Most methods dealing with the scale factor are based on the spatial or the spectral domains. In this paper, a method with the time domain is proposed to measure the scale factor of the input image. It is called a time-sequential scaled method. The method utilizes the relationship between the scale variation and the correlation value of two images. It sends a few artificially scaled input images to compare with the template images. The correlation value increases and decreases with the increasing of the scale factor at the intervals of 0.8~1 and 1~1.2, respectively. The original scale of the input image can be measured by estimating the largest correlation value through correlating the artificially scaled input image with the template images. The measurement range for the scale can be 0.8~4.8. Scale factor beyond 1.2 is measured by scaling the input image at the factor of 1/2, 1/3 and 1/4, correlating the artificially scaled input image with the template images, and estimating the new corresponding scale factor inside 0.8~1.2.

  7. All-optical switchable holographic Fresnel lens based on azo-dye-doped polymer-dispersed liquid crystals.

    Science.gov (United States)

    Jashnsaz, Hossein; Nataj, Nahid Hosain; Mohajerani, Ezeddin; Khabbazi, Amir

    2011-08-01

    Fabrication of an all-optical switchable holographic liquid crystal (LC) Fresnel lens based on azo-dye-doped polymer-dispersed LCs is reported using a Michelson interferometer. It is found that, upon circularly polarized photoirradiation, the diffraction efficiency of the fabricated Fresnel lens was increased significantly in a reversible manner. We believe this is due to the anisotropy induced by reorientation of the LC molecules coupled with azo-dye molecule orientation due to trans-cis-trans photoisomerization, which modulates the refractive index of the LC-rich regions. We also studied the effect of azo dye on the polarization dependency of the fabricated lens.

  8. Holographic polarization-selective module based on a small dove prism coupler for magneto-optical pickup heads.

    Science.gov (United States)

    Shin, Chang-Won; Vu, Viet-Tien; Kim, Nam; An, Jun-Won; Suh, Dongwoo; Park, Yongwoo; Ryu, Hojun; Paek, Mun-Cheol; Pyo, Hyeon-Bong

    2005-07-10

    A new structure for polarization-selective elements, consisting of two holographic gratings and a Dove prism coupler, is proposed. The absence of a multistage waveguide and the benefits of compact size and lightweight volume are the outstanding features of the new structure. Based on the coupled-wave theory, the analysis and design of the structure are discussed in detail to calculate the required index modulation. Several parameters, such as the recording intensity, the exposure time, and the recording angles for the fabrication of the proposed element, are determined. Under these conditions, the element is fabricated in Dupont photopolymer HRF-150-38 material and with an operating wavelength of 532 nm. A simplified pickup head is constructed to evaluate the performance of the fabricated element.

  9. Holographic 3D multi-spot two-photon excitation for fast optical stimulation in brain

    Science.gov (United States)

    Takiguchi, Yu; Toyoda, Haruyoshi

    2017-04-01

    We report here a holographic high speed accessing microscope of sensory-driven synaptic activity across all inputs to single living neurons in the context of the intact cerebral cortex. This system is based on holographic multiple beam generation with spatial light modulator, we have demonstrated performance of the holographic excitation efficiency in several in vitro prototype system. 3D weighted iterative Fourier Transform method using the Ewald sphere in consideration of calculation speed has been adopted; multiple locations can be patterned in 3D with single hologram. Standard deviation of intensities of spots are still large due to the aberration of the system and/or hologram calculation, we successfully excited multiple locations of neurons in living mouse brain to monitor the calcium signals.

  10. Optical Properties of Electrically Tunable Two-Dimensional Photonic Lattice Structures Formed in a Holographic Polymer-Dispersed Liquid Crystal Film: Analysis and Experiment

    Directory of Open Access Journals (Sweden)

    Mayu Miki

    2014-05-01

    Full Text Available We report on theoretical and experimental investigations of optical wave propagations in two-dimensional photonic lattice structures formed in a holographic polymer-dispersed liquid crystal (HPDLC film. In the theoretical analysis we employed the 2×2 matrix formulation and the statistical thermodynamics model to analyze the formation of anisotropic photonic lattice structures by holographic polymerization. The influence of multiple reflections inside an HPDLC film on the formed refractive index distribution was taken into account in the analysis. In the experiment we fabricated two-dimensional photonic lattice structures in an HPDLC film under three-beam interference holographic polymerization and performed optical measurements of spectral transmittances and wavelength dispersion. We also demonstrated the electrical control capability of the fabricated photonic lattice structure and its dependence on incident wave polarization. These measured results were compared with the calculated ones by means of photonic band and beam propagation calculations.

  11. Optical Properties of Electrically Tunable Two-Dimensional Photonic Lattice Structures Formed in a Holographic Polymer-Dispersed Liquid Crystal Film: Analysis and Experiment†

    Science.gov (United States)

    Miki, Mayu; Ohira, Ryuichiro; Tomita, Yasuo

    2014-01-01

    We report on theoretical and experimental investigations of optical wave propagations in two-dimensional photonic lattice structures formed in a holographic polymer-dispersed liquid crystal (HPDLC) film. In the theoretical analysis we employed the 2 × 2 matrix formulation and the statistical thermodynamics model to analyze the formation of anisotropic photonic lattice structures by holographic polymerization. The influence of multiple reflections inside an HPDLC film on the formed refractive index distribution was taken into account in the analysis. In the experiment we fabricated two-dimensional photonic lattice structures in an HPDLC film under three-beam interference holographic polymerization and performed optical measurements of spectral transmittances and wavelength dispersion. We also demonstrated the electrical control capability of the fabricated photonic lattice structure and its dependence on incident wave polarization. These measured results were compared with the calculated ones by means of photonic band and beam propagation calculations. PMID:28788643

  12. Optical Properties of Electrically Tunable Two-Dimensional Photonic Lattice Structures Formed in a Holographic Polymer-Dispersed Liquid Crystal Film: Analysis and Experiment.

    Science.gov (United States)

    Miki, Mayu; Ohira, Ryuichiro; Tomita, Yasuo

    2014-05-07

    We report on theoretical and experimental investigations of optical wave propagations in two-dimensional photonic lattice structures formed in a holographic polymer-dispersed liquid crystal (HPDLC) film. In the theoretical analysis we employed the 2×2 matrix formulation and the statistical thermodynamics model to analyze the formation of anisotropic photonic lattice structures by holographic polymerization. The influence of multiple reflections inside an HPDLC film on the formed refractive index distribution was taken into account in the analysis. In the experiment we fabricated two-dimensional photonic lattice structures in an HPDLC film under three-beam interference holographic polymerization and performed optical measurements of spectral transmittances and wavelength dispersion. We also demonstrated the electrical control capability of the fabricated photonic lattice structure and its dependence on incident wave polarization. These measured results were compared with the calculated ones by means of photonic band and beam propagation calculations.

  13. Atomic force and optical near-field microscopic investigations of polarization holographic gratings in a liquid crystalline azobenzene side-chain polyester

    DEFF Research Database (Denmark)

    Ramanujam, P.S.; Holme, N.C.R.; Hvilsted, S.

    1996-01-01

    Atomic force and scanning near-field optical microscopic investigations have been carried out on a polarization holographic grating recorded in an azobenzene side-chain Liquid crystalline polyester. It has been found that immediately following laser irradiation, a topographic surface grating......-field optical microscopic scanning of the grating reveals, however, that the bulk of the film remains optically anisotropic. (C) 1996 American Institute of Physics....

  14. Optical sensing: recognition elements and devices

    Science.gov (United States)

    Gauglitz, Guenter G.

    2012-09-01

    The requirements in chemical and biochemical sensing with respect to recognition elements, avoiding non-specific interactions, and high loading of the surface for detection of low concentrations as well as optimized detection systems are discussed. Among the many detection principles the optical techniques are classified. Methods using labeled compounds like Total Internal Reflection Fluorescence (TIRF) and direct optical methods like micro reflectometry or refractometry are discussed in comparison. Reflectometric Interference Spectroscopy (RIfS) is presented as a robust simple method for biosensing. As applications, trace analysis of endocrine disruptors in water, hormones in food, detection of viruses and bacteria in food and clinical diagnostics are discussed.

  15. Arbitrary birefringent metamaterials for holographic optics at λ = 1.55 μm.

    Science.gov (United States)

    Tsai, Yu-Ju; Larouche, Stéphane; Tyler, Talmage; Llopis, Antonio; Royal, Matthew; Jokerst, Nan M; Smith, David R

    2013-11-04

    This paper presents an optical element capable of multiplexing two diffraction patterns for two orthogonal linear polarizations, based on the use of non-resonant metamaterial cross elements. The metamaterial cross elements provide unique building blocks for engineering arbitrary birefringence. As a proof-of-concept demonstration, we present the design and experimental characterization of a polarization multiplexed blazed diffraction grating and a polarization multiplexed computer-generated hologram, for the telecommunication wavelength of λ = 1.55 μm. A quantitative study of the polarization multiplexed grating reveals that this approach yields a very large polarization contrast ratio. The results show that metamaterials can form the basis for a versatile and compact platform useful in the design of multi-functional photonic devices.

  16. Real-time optical correlator using computer-generated holographic filter on a liquid crystal light valve

    Science.gov (United States)

    Chao, Tien-Hsin; Yu, Jeffrey

    1990-01-01

    Limitations associated with the binary phase-only filter often used in optical correlators are presently circumvented in the writing of complex-valued data on a gray-scale spatial light modulator through the use of a computer-generated hologram (CGH) algorithm. The CGH encodes complex-valued data into nonnegative real CGH data in such a way that it may be encoded in any of the available gray-scale spatial light modulators. A CdS liquid-crystal light valve is used for the complex-valued CGH encoding; computer simulations and experimental results are compared, and the use of such a CGH filter as the synapse hologram in a holographic optical neural net is discussed.

  17. Strain-Biased PLZT Input Devices (Page Composers) for Holographic Memories and Optical Data Processing.

    Science.gov (United States)

    Roberts, H N

    1972-02-01

    PLZT-7/65/35 is a ferroelectric ceramic with strong electrooptic properties and memory; it is switched through transparent electrodes when mechanically strained. Matrix addressed x-y page composers for interfacing electrical and coherent optical systems are being fabricated with PLZT. Switching voltages are 50-300 V. Optical efficiencies greater than 40% have been achieved. Strains near 2.4 x 10(-3) mm/mm permit half-wave retardation switching in 100-micro-thick plates with 80-V read-in and 190-V erase levels (60 Hz hysteresis data). A 128 x 128 element array can operate at 10(7) bits/sec with 10-microsec switching in a row at a time mode. Half-select disturbances affect contrasts. Applications in displays are also feasible.

  18. Demonstration of holographic smart card system using the optical memory technology

    Science.gov (United States)

    Kim, JungHoi; Choi, JaeKwang; An, JunWon; Kim, Nam; Lee, KwonYeon; Jeon, SeckHee

    2003-05-01

    In this paper, we demonstrate the holographic smart card system using digital holographic memory technique that uses reference beam encrypted by the random phase mask to prevent unauthorized users from accessing the stored digital page. The input data that include document data, a picture of face, and a fingerprint for identification is encoded digitally and then coupled with the reference beam modulated by a random phase mask. Therefore, this proposed system can execute recording in the order of MB~GB and readout all personal information from just one card without any additional database system. Also, recorded digital holograms can't be reconstructed without a phase key and can't be copied by using computers, scanners, or photography.

  19. Holographic entanglement entropy of local quenches in AdS4/CFT3: a finite-element approach

    Science.gov (United States)

    Jahn, Alexander; Takayanagi, Tadashi

    2018-01-01

    Understanding quantum entanglement in interacting higher-dimensional conformal field theories is a challenging task, as direct analytical calculations are often impossible to perform. With holographic entanglement entropy, calculations of entanglement entropy turn into a problem of finding extremal surfaces in a curved spacetime, which we tackle with a numerical finite-element approach. In this paper, we compute the entanglement entropy between two half-spaces resulting from a local quench, triggered by a local operator insertion in a CFT3. We find that the growth of entanglement entropy at early time agrees with the prediction from the first law, as long as the conformal dimension Δ of the local operator is small. Within the limited time region that we can probe numerically, we observe deviations from the first law and a transition to sub-linear growth at later time. In particular, the time dependence at large Δ shows qualitative differences to the simple logarithmic time dependence familiar from the CFT2 case. We hope that our work will motivate further studies, both numerical and analytical, on entanglement entropy in higher dimensions.

  20. Microbinary element for optical wavelet transform

    Science.gov (United States)

    Huang, Gaogui; Feng, Wenyi; Yan, Yingbai; Jin, Guofan

    1997-09-01

    In order to simplify an opto-electronic hybrid system for texture segmentation based on the multi-channel filtering framework in the human visual theory, a micro-binary optical element (BOE) is designed and fabricated. The BOE has the functions of splitting, filtering and imaging simultaneously. The focal length of the BOE is 150mm and the diameter is 4mm. It contains sixteen Gabor wavelet filters with scales decreased by 2 orders and with our orientations separated every 45 degree, which can be used to perform a nearly complete decomposition with wavelet transform. The relief surface structure with minimum feature scale of 1.5micrometers is fabricated by using the photolithography and ion etching technique. In this paper, the functions of the BOE and the simulation of the filtering are described in detail, the experimental results and improvement of the element are given.

  1. Holographic pixel super-resolution in portable lensless on-chip microscopy using a fiber-optic array.

    Science.gov (United States)

    Bishara, Waheb; Sikora, Uzair; Mudanyali, Onur; Su, Ting-Wei; Yaglidere, Oguzhan; Luckhart, Shirley; Ozcan, Aydogan

    2011-04-07

    We report a portable lensless on-chip microscope that can achieve optic waveguides are butt-coupled to light emitting diodes, which are controlled by a low-cost micro-controller to sequentially illuminate the sample. The resulting lensfree holograms are then captured by a digital sensor-array and are rapidly processed using a pixel super-resolution algorithm to generate much higher resolution holographic images (both phase and amplitude) of the objects. This wide-field and high-resolution on-chip microscope, being compact and light-weight, would be important for global health problems such as diagnosis of infectious diseases in remote locations. Toward this end, we validate the performance of this field-portable microscope by imaging human malaria parasites (Plasmodium falciparum) in thin blood smears. Our results constitute the first-time that a lensfree on-chip microscope has successfully imaged malaria parasites.

  2. Geometrically unrestricted, topologically constrained control of liquid crystal defects using simultaneous holonomic magnetic and holographic optical manipulation

    Science.gov (United States)

    Varney, Michael C. M.; Jenness, Nathan J.; Smalyukh, Ivan I.

    2014-02-01

    Despite the recent progress in physical control and manipulation of various condensed matter, atomic, and particle systems, including individual atoms and photons, our ability to control topological defects remains limited. Recently, controlled generation, spatial translation, and stretching of topological point and line defects have been achieved using laser tweezers and liquid crystals as model defect-hosting systems. However, many modes of manipulation remain hindered by limitations inherent to optical trapping. To overcome some of these limitations, we integrate holographic optical tweezers with a magnetic manipulation system, which enables fully holonomic manipulation of defects by means of optically and magnetically controllable colloids used as "handles" to transfer forces and torques to various liquid crystal defects. These colloidal handles are magnetically rotated around determined axes and are optically translated along three-dimensional pathways while mechanically attached to defects, which, combined with inducing spatially localized nematic-isotropic phase transitions, allow for geometrically unrestricted control of defects, including previously unrealized modes of noncontact manipulation, such as the twisting of disclination clusters. These manipulation capabilities may allow for probing topological constraints and the nature of defects in unprecedented ways, providing the foundation for a tabletop laboratory to expand our understanding of the role defects play in fields ranging from subatomic particle physics to early-universe cosmology.

  3. Design and calibration of a digital Fourier holographic microscope for particle sizing via goniometry and optical scatter imaging in transmission.

    Science.gov (United States)

    Rossi, Vincent M; Jacques, Steven L

    2016-06-13

    Goniometry and optical scatter imaging have been used for optical determination of particle size based upon optical scattering. Polystyrene microspheres in suspension serve as a standard for system validation purposes. The design and calibration of a digital Fourier holographic microscope (DFHM) are reported. Of crucial importance is the appropriate scaling of scattering angle space in the conjugate Fourier plane. A detailed description of this calibration process is described. Spatial filtering of the acquired digital hologram to use photons scattered within a restricted angular range produces an image. A pair of images, one using photons narrowly scattered within 8 - 15° (LNA), and one using photons broadly scattered within 8 - 39° (HNA), are produced. An image based on the ratio of these two images, OSIR = HNA/LNA, following Boustany et al. (2002), yields a 2D Optical Scatter Image (OSI) whose contrast is based on the angular dependence of photon scattering and is sensitive to the microsphere size, especially in the 0.5-1.0µm range. Goniometric results are also given for polystyrene microspheres in suspension as additional proof of principle for particle sizing via the DFHM.

  4. Electro-optical characteristics of holographic polymer dispersed liquid crystal gratings doped with nanosilver.

    Science.gov (United States)

    Zhang, Menghua; Zheng, Jihong; Gui, Kun; Wang, Kangni; Guo, Caihong; Wei, Xiaopeng; Zhuang, Songlin

    2013-11-01

    We report on the synthesis and characteristics of a holographic polymer dispersed liquid crystal (H-PDLC) switchable grating based on nano-Ag particles. The influence of doping different concentrations of nano-Ag on the diffraction efficiency, driving voltage, and response time of the H-PDLC grating is investigated. The best grating characteristics were achieved with 0.05% nano-Ag doping. Calculated and experimental results reveal that the improvement of the characteristics is likely due to the surface plasmon effect of nano-Ag.

  5. Electro-optical effects of oxidized multi-walled carbon nanotube doping on holographic polymer dispersed liquid crystal films

    Science.gov (United States)

    Shriyan, Sameet K.; Fontecchio, Adam K.

    2009-08-01

    In this work we demonstrate an improved electro-optic response and quantify the effect on transmitted wavefront properties of thiolene based reflection mode holographic polymer dispersed liquid crystals (HPDLC) gratings doped with oxidized multi-walled carbon nanotubes (MWNT). Effect of various doping levels on the reflection efficiencies is evaluated and optical spectrometry results indicate a reduction in the reflection efficiency and an anomalous electrooptic behavior at higher doping levels of MWNT especially in gratings with longer pitch where the diffusion length for liquid crystal (LC) is long. Wavefront analysis based on Shack-Hartmann wavefront sensor show an increase in the transmitted RMS wavefront error in a 633nm wavefront after a critical level of MWNT doping. Polarized optical microscopy results indicate that the MWNT do not participate in the photo polymerization induced phase separation hence acting as physical barriers for the counter diffusing LC at high MWNT concentrations. Reduction in overall size of the LC droplets in the LC rich planes, observed using scanning electron microscopy imaging, leads to faster rise and fall times hence quicker relaxation time. Observation of reduced switching voltage is attributed to the modification of dielectric properties of the medium manifested by an increase in capacitance and decrease in resistivity in presence of MWNT.

  6. Effects of multi-context information recorded at different regions in holographic polymer-dispersed liquid crystal on optical reconfiguration

    Science.gov (United States)

    Ogiwara, Akifumi; Watanabe, Minoru

    2016-08-01

    A holographic polymer-dispersed liquid crystal (HPDLC) memory to record multi-context information for an optically reconfigurable gate array is formed by constructing a laser illumination system to implement successive laser exposures at different small regions in a glass cell filled with LC composites. The context pattern arrangements for circuit information are designed in a 3 × 3 in.2 photomask by electron beam lithography, and they are recorded as laser interference patterns at nine regions separated in an HPDLC sample by a laser interferometer composed of movable pinhole and photomask plates placed on motorized stages. The multi-context information reconstructed from the different regions in the HPDLC is written to a photodiode array in a gate-array VLSI by switching only the position of laser irradiation using the displacement of the pinhole plate under the control of a personal computer (PC). The effects of multi-context information recorded at different regions in the HPDLC on optical reconfiguration are discussed in terms of the optical system composed of ORGA VLSI and HPDLC memory. The internal structures in the HPDLC memory formed by multi-context recording are investigated by scanning electron microscopy (SEM) observation, and the configurations composed of LC and polymer phases are revealed at various regions in the HPDLC memory.

  7. Holographic and light-field imaging for augmented reality

    Science.gov (United States)

    Lee, Byoungho; Hong, Jong-Young; Jang, Changwon; Jeong, Jinsoo; Lee, Chang-Kun

    2017-02-01

    We discuss on the recent state of the augmented reality (AR) display technology. In order to realize AR, various seethrough three-dimensional (3D) display techniques have been reported. We describe the AR display with 3D functionality such as light-field display and holography. See-through light-field display can be categorized by the optical elements which are used for see-through property: optical elements controlling path of the light-fields and those generating see-through light-field. Holographic display can be also a good candidate for AR display because it can reconstruct wavefront information and provide realistic virtual information. We introduce the see-through holographic display using various optical techniques.

  8. Fully updatable three-dimensional holographic stereogram display device based on organic monolithic compound.

    Science.gov (United States)

    Tsutsumi, Naoto; Kinashi, Kenji; Tada, Kazuhiro; Fukuzawa, Kodai; Kawabe, Yutaka

    2013-08-26

    Holographic technique is a unique method to reproduce object on a device in three dimensions (3D). It allows us real 3D images with full parallax without special eye glasses or any special optical devices. we present fully updatable holographic 3D display system using a holographic stereographic technique with a transparent optical device of poly(methylmethacrylate) doped organic compound of 3-[(4-nitrophenyl)azo]-9H-carbazole-9-ethanol (NACzE). 100 elemental holograms which are a series of pictures of object took from different angles can completely reproduce updatable entire hologram of object. Former hologram of object can be over-recorded and immediately replaced by new hologram of object without erasing process. Typical recording time for an elemental hologram is 200 ms, and total recording time including translational stage movement for 100 elemental holograms is 28 s. The present system with preferred memory is a good candidate for 3D signage application.

  9. In situ single-atom array synthesis using dynamic holographic optical tweezers

    Science.gov (United States)

    Kim, Hyosub; Lee, Woojun; Lee, Han-gyeol; Jo, Hanlae; Song, Yunheung; Ahn, Jaewook

    2016-01-01

    Establishing a reliable method to form scalable neutral-atom platforms is an essential cornerstone for quantum computation, quantum simulation and quantum many-body physics. Here we demonstrate a real-time transport of single atoms using holographic microtraps controlled by a liquid-crystal spatial light modulator. For this, an analytical design approach to flicker-free microtrap movement is devised and cold rubidium atoms are simultaneously rearranged with 2N motional degrees of freedom, representing unprecedented space controllability. We also accomplish an in situ feedback control for single-atom rearrangements with the high success rate of 99% for up to 10 μm translation. We hope this proof-of-principle demonstration of high-fidelity atom-array preparations will be useful for deterministic loading of N single atoms, especially on arbitrary lattice locations, and also for real-time qubit shuttling in high-dimensional quantum computing architectures. PMID:27796372

  10. Shortening method for optical reconstruction distance in digital holographic display with phase hologram

    Science.gov (United States)

    Mori, Yutaka; Nomura, Takanori

    2013-12-01

    We present a method to solve a distance issue. In digital holography, the reconstruction distance is different from the original one because of the difference of the pixel size between an imaging device and a display device. In general, the distance is larger because the pixel size of the display is larger than that of the imaging device. This makes it hard to recognize perception of the stereoscopic effect when holographic reconstructed images are used for the stereopsis system. Typically, a numerical propagation method and a spherical phase addition are used to shorten the distance. However, each method is not shortened enough. To clear the criterion, the limitation of each method is verified. By combining two methods, the reconstruction distance is shortened from 4440 to 547 mm. In addition, it is successfully shown that the proposed combining method is useful for the stereopsis by visual perception evaluation.

  11. Rewritable azobenzene polyester for polarization holographic data storage

    DEFF Research Database (Denmark)

    Kerekes, A; Sajti, Sz.; Loerincz, Emoeke

    2000-01-01

    Optical storage properties of thin azobenzene side-chain polyester films were examined by polarization holographic measurements. The new amorphous polyester film is the candidate material for the purpose of rewritable holographic memory system. Temporal formation of anisotropic and topographic...

  12. Magnonic Holographic Memory

    Science.gov (United States)

    Khitun, Alexander; Kozhevnikov, Alexander; Gertz, Frederick; Filimonov, Yuri

    2015-03-01

    Collective oscillation of spins in magnetic lattice known as spin waves (magnons) possess relatively long coherence length at room temperature, which makes it possible to build sub-micrometer scale holographic devices similar to the devices developed in optics. In this work, we present a prototype 2-bit magnonic holographic memory. The memory consists of the double-cross waveguide structure made of Y3Fe2(FeO4)3 with magnets placed on the top of waveguide junctions. Information is encoded in the orientation of the magnets, while the read-out is accomplished by the spin waves generated by the micro-antennas placed on the edges of the waveguides. The interference pattern produced by multiple spin waves makes it possible to build a unique holographic image of the magnetic structure and recognize the state of the each magnet. The development of magnonic holographic devices opens a new horizon for building scalable holographic devices compatible with conventional electronic devices. This work was supported in part by the FAME Center, one of six centers of STARnet, a Semiconductor Research Corporation program sponsored by MARCO and DARPA and by the National Science Foundation under the NEB2020 Grant ECCS-1124714.

  13. Cantilever biosensor reader using a common-path, holographic optical interferometer

    DEFF Research Database (Denmark)

    Pedersen, Henrik Chresten; Jakobsen, Michael Linde; Hanson, Steen Grüner

    2010-01-01

    We demonstrate an optical reader principle aimed at monitoring biologically induced deflections of microcantilevers often used in biosensor systems. The principle is based on a so-called common-path optical interferometer in which the two interfering optical beams are copropagating,which makes...... the system less sensitive to external disturbances. A detection limit of around 1 nm’s deflection is demonstrated....

  14. Holographic memory system based on projection recording of computer-generated 1D Fourier holograms.

    Science.gov (United States)

    Betin, A Yu; Bobrinev, V I; Donchenko, S S; Odinokov, S B; Evtikhiev, N N; Starikov, R S; Starikov, S N; Zlokazov, E Yu

    2014-10-01

    Utilization of computer generation of holographic structures significantly simplifies the optical scheme that is used to record the microholograms in a holographic memory record system. Also digital holographic synthesis allows to account the nonlinear errors of the record system to improve the microholograms quality. The multiplexed record of holograms is a widespread technique to increase the data record density. In this article we represent the holographic memory system based on digital synthesis of amplitude one-dimensional (1D) Fourier transform holograms and the multiplexed record of these holograms onto the holographic carrier using optical projection scheme. 1D Fourier transform holograms are very sensitive to orientation of the anamorphic optical element (cylindrical lens) that is required for encoded data object reconstruction. The multiplex record of several holograms with different orientation in an optical projection scheme allowed reconstruction of the data object from each hologram by rotating the cylindrical lens on the corresponding angle. Also, we discuss two optical schemes for the recorded holograms readout: a full-page readout system and line-by-line readout system. We consider the benefits of both systems and present the results of experimental modeling of 1D Fourier holograms nonmultiplex and multiplex record and reconstruction.

  15. Mass production of holographic transparent components for augmented and virtual reality applications

    Science.gov (United States)

    Russo, Juan Manuel; Dimov, Fedor; Padiyar, Joy; Coe-Sullivan, Seth

    2017-06-01

    Diffractive optics such as holographic optical elements (HOEs) can provide transparent and narrow band components with arbitrary incident and diffracted angles for near-to-eye commercial electronic products for augmented reality (AR), virtual reality (VR), and smart glass applications. In this paper, we will summarize the operational parameters and general optical geometries relevant for near-to-eye displays, the holographic substrates available for these applications, and their performance characteristics and ease of manufacture. We will compare the holographic substrates available in terms of fabrication, manufacturability, and end-user performance characteristics. Luminit is currently emplacing the manufacturing capacity to serve this market, and this paper will discuss the capabilities and limitations of this unique facility.

  16. Holographic Memories

    DEFF Research Database (Denmark)

    Ramanujam, P.S.; Holme, NCR; Berg, RH

    1999-01-01

    A Two-dimensional holographic memory for archival storage is described. Assuming a coherent transfer function, an A4 page can be stored at high resolution in an area of 1 mm(2). Recently developed side-chain liquid crystalline azobenzene polyesters are found to be suitable media for holographic...... storage. They exhibit high resolution, high diffraction efficiency, have long storage life, are fully erasable and are mechanically stable....

  17. Advanced Holographic Phase Nulls Suitable for EUV Quality Optical Testing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A number of future space sciences missions require optical surfaces that are accurate to nanometer and sub-nanometer levels. These applications include large...

  18. Influence of the spatial frequency on the diffractive optical elements fabrication in PDLCs

    Science.gov (United States)

    Fernández, R.; Fenoll, S.; Gallego, S.; Márquez, A.; Francés, J.; Navarro Fuster, V.; Beléndez, A.; Pascual, I.

    2016-09-01

    Photopolymers are classical holographic recording materials. Recently their chemical composition and the fabrication techniques have been optimized for many new applications such as interconnectors, solar concentrations, 2-D photonic structures, or wave-guides. Their potential usefulness has been drastically increased by the introduction of dispersed liquid crystal molecules; these components can be concentrated in the non-exposed zones of the material by a photopolymerization induced phase separation process (PIPS). Therefore, by combining polymer and dispersed liquid crystal (PDLC) has emerged as a new composite material for switchable diffractive optical elements (DOEs). Parallel to the material advances some techniques have been proposed to record very low spatial frequencies DOE's. Different researchers have reported proposes to record DOE like fork gratings, photonics structures, lenses, sinusoidal, blazed or fork gratings. In this work we have studied the behavior of a PDLC material to record DOE's with different spatial periods: from 1 μm, using holographic technique, to more than 200 μm, Liquid Cristal on Silicon (LCoS) display working in mostly amplitude mode as a master. Due to the improvement in the spatial light modulation technology and the pixel miniaturization, this technique permits us store gratings with spatial frequencies until few microns. Additionally, this technology permits us an accurate and dynamic control of the phase and the amplitude of the recording beam. In particular, for our case, to generate the blazed gratings, we use an LCoS-Pluto provided by Holoeye with a resolution of 1920x1080 (HDTV) pixels and a pixel size of 7.7x7.7 m2.

  19. Didactical Holographic Exhibit Including Holo TV (holographic Television)

    Science.gov (United States)

    Lunazzi, José J.; Magalhães, Daniel S. F.; Rivera, Noemí I. R.

    2008-04-01

    Our Institute of Physics exposes since 1980 didactical exhibitions of holography in Brazil where nice holograms are shown altogether with basic experiments of geometric and wave optics. This experiments lead to the understanding of the phenomenon of images of an ample way. Thousands of people have been present at them, in their majority of the Universidade Estadual de Campinas, where since 2002 they have taken the format of a course without formal evaluation. This way the exhibition has been divided in four modules, in each one of them are shown different holograms, experiments of optics and applications of diffractive images with white light developed in the Institute of Physics. The sequence of the learning through the modules begins with the geometric optics, later we explain the wave optics and finally holography. The phenomenon of the diffraction in daily elements is shown experimentally from the beginning. As well as the application of the holographic screens in white light: the television images that appear in front of the screen and the spectator can try to experience the reality illusion. Put something so exclusive (that only exists in the laboratory) to the public is a way to approximate the persons to an investigation in course. The vision of images that seem to be of holograms, but in movement, and size of until a square meter completes this exhibition of an exclusive way in the world.

  20. Picosecond Holographic-Grating Spectroscopy

    NARCIS (Netherlands)

    Duppen, K.

    1987-01-01

    Interfering light waves produce an optical interference pattern in any medium that interacts with light. This modulation of some physical parameter of the system acts as a classical holographic grating for optical radiation. When such a grating is produced through interaction of pulsed light waves

  1. Optimal phase element for generating a perfect optical vortex.

    Science.gov (United States)

    Kotlyar, Victor V; Kovalev, Alexey A; Porfirev, Alexey P

    2016-12-01

    We derived exact analytical relationships to describe the complex amplitude of a perfect optical vortex generated by means of three different optical elements, namely, (i) an amplitude-phase element with a transmission function proportional to a Bessel function, (ii) an optimal phase element with a transmission equal to the sign function of a Bessel function, and (iii) a spiral axicon. The doughnut intensity was shown to be highest when using an optimal phase element. The spiral-axicon-aided diffraction ring was found to be twice as wide as when generated using two other elements. Thus, the optimal filter was shown to be best suited for generating a perfect optical vortex. The simulation results were shown to corroborate theoretical predictions, with the experiment being in agreement with theory and simulation.

  2. Finite-element modelling of multilayer X-ray optics.

    Science.gov (United States)

    Cheng, Xianchao; Zhang, Lin

    2017-05-01

    Multilayer optical elements for hard X-rays are an attractive alternative to crystals whenever high photon flux and moderate energy resolution are required. Prediction of the temperature, strain and stress distribution in the multilayer optics is essential in designing the cooling scheme and optimizing geometrical parameters for multilayer optics. The finite-element analysis (FEA) model of the multilayer optics is a well established tool for doing so. Multilayers used in X-ray optics typically consist of hundreds of periods of two types of materials. The thickness of one period is a few nanometers. Most multilayers are coated on silicon substrates of typical size 60 mm × 60 mm × 100-300 mm. The high aspect ratio between the size of the optics and the thickness of the multilayer (10 7 ) can lead to a huge number of elements for the finite-element model. For instance, meshing by the size of the layers will require more than 10 16 elements, which is an impossible task for present-day computers. Conversely, meshing by the size of the substrate will produce a too high element shape ratio (element geometry width/height > 10 6 ), which causes low solution accuracy; and the number of elements is still very large (10 6 ). In this work, by use of ANSYS layer-functioned elements, a thermal-structural FEA model has been implemented for multilayer X-ray optics. The possible number of layers that can be computed by presently available computers is increased considerably.

  3. Finite-element modelling of multilayer X-ray optics

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Xianchao; Zhang, Lin

    2017-04-11

    Multilayer optical elements for hard X-rays are an attractive alternative to crystals whenever high photon flux and moderate energy resolution are required. Prediction of the temperature, strain and stress distribution in the multilayer optics is essential in designing the cooling scheme and optimizing geometrical parameters for multilayer optics. The finite-element analysis (FEA) model of the multilayer optics is a well established tool for doing so. Multilayers used in X-ray optics typically consist of hundreds of periods of two types of materials. The thickness of one period is a few nanometers. Most multilayers are coated on silicon substrates of typical size 60 mm × 60 mm × 100–300 mm. The high aspect ratio between the size of the optics and the thickness of the multilayer (107) can lead to a huge number of elements for the finite-element model. For instance, meshing by the size of the layers will require more than 1016elements, which is an impossible task for present-day computers. Conversely, meshing by the size of the substrate will produce a too high element shape ratio (element geometry width/height > 106), which causes low solution accuracy; and the number of elements is still very large (106). In this work, by use of ANSYS layer-functioned elements, a thermal-structural FEA model has been implemented for multilayer X-ray optics. The possible number of layers that can be computed by presently available computers is increased considerably.

  4. Holographic video display based on guided-wave acousto-optic devices

    Science.gov (United States)

    Smalley, Daniel E.; Smithwick, Quinn Y. J.; Bove, V. Michael, Jr.

    2007-02-01

    We introduce a new holo-video display architecture ("Mark III") developed at the MIT Media Laboratory. The goal of the Mark III project is to reduce the cost and size of a holo-video display, making it into an inexpensive peripheral to a standard desktop PC or game machine which can be driven by standard graphics chips. Our new system is based on lithium niobate guided-wave acousto-optic devices, which give twenty or more times the bandwidth of the tellurium dioxide bulk-wave acousto-optic modulators of our previous displays. The novel display architecture is particularly designed to eliminate the high-speed horizontal scanning mechanism that has traditionally limited the scalability of Scophony- style video displays. We describe the system architecture and the guided-wave device, explain how it is driven by a graphics chip, and present some early results.

  5. Elements of Optical Solitons: An Overview

    Indian Academy of Sciences (India)

    Scottish Naval Architect. John Scott Russell is the father of this novel idea. In. 1834 when ..... a technique called dispersion management is often used in the design of modern fiber optic communication sys- tems. ... as supercontinuum generation, pulse compression, op- tical switching, fiber laser, parametric amplifier, soliton ...

  6. Presbyopia compensation with a light sword optical element

    Science.gov (United States)

    Ares Garcia, J.; Bará, S.; Gomez Garcia, M.; Jaroszewicz, Z.; Kołodziejczyk, A.; Petelczyc, K.

    2008-12-01

    This paper presents numerical analysis of imaging quality of a refractive light sword optical element (LSOE). For comparison other optical imaging elements with extended focal depth, such as the bifocal lens, the trifocal lens, the forward axicon and the backward axicon, were also checked. The parameters of all elements were assumed according to the human eye parameters in order to check possibilities of presbyopia compensation. Obtained results allow to state that the LSOE is a promising solution for compensation of insufficient human eye accommodation.

  7. Sighting optics including an optical element having a first focal length and a second focal length

    Science.gov (United States)

    Crandall, David Lynn [Idaho Falls, ID

    2011-08-01

    One embodiment of sighting optics according to the teachings provided herein may include a front sight and a rear sight positioned in spaced-apart relation. The rear sight includes an optical element having a first focal length and a second focal length. The first focal length is selected so that it is about equal to a distance separating the optical element and the front sight and the second focal length is selected so that it is about equal to a target distance. The optical element thus brings into simultaneous focus, for a user, images of the front sight and the target.

  8. Design optimization and manufacturing of holographic windows for daylighting applications in buildings

    Energy Technology Data Exchange (ETDEWEB)

    Tholl, H.D.; Stojanoff, C.G.; Kubiza, R.; Willbold-Lohr, G. [Aachen Inst. of Technology (Germany)

    1993-12-31

    The function of holographic optical elements in daylighting applications is to redirect sunlight from the immediate window area into the rear of a room in order to illuminate the darker regions and to reduce glare. A prerequisite for the successful application of holograms in daylighting systems is the solution of the problems of white light diffraction and of uniform holographic properties across a large aperture. This paper presents theoretical and experimental investigations of these two problems. It will be shown that white light diffraction is possible and that uniform diffraction efficiencies over large apertures are attainable.

  9. Doping Liquid Crystal Cells with Photocurable Monomer via Holographic Exposure to Realize Optical-Scattering-Free Infrared Phase Modulators with Fast Response Time

    Directory of Open Access Journals (Sweden)

    Chun-Yu Chien

    2017-07-01

    Full Text Available Photocurable monomer-doped liquid crystal (LC cells were processed via holographic exposure using a low-power He–Ne laser to generate holographic polymer networks. The polymer network LC (PNLC cells are used to fabricate infrared phase modulators at 1550 nm wavelength possessing favorable electro-optical performance. Compared with our previous work, the percentages of ingredients in the LC mixture filled in PNLC cells underwent a slight change. The 2 wt% concentration of anisotropic monomer RM257 were in place of isotropic monomer N–vinyl–2–pyrrolidinone (NVP. As a result, the fabricated phase modulators also maintained well homogeneous LC alignments and optical-scattering-free characteristics. Furthermore, NVP dopant successfully reduced the operating voltages from 95 Vrms to 79 Vrms to prevent polymer network deformation when electrically operating with higher voltages. The fabricated infrared phase modulators had a good average response time (i.e., rising time of 0.88 ms and falling time of 0.40 ms.

  10. Diffraction efficiency analysis for multi-level diffractive optical elements

    Energy Technology Data Exchange (ETDEWEB)

    Erteza, I.A.

    1995-11-01

    Passive optical components can be broken down into two main groups: Refractive elements and diffractive elements. With recent advances in manufacturing technologies, diffractive optical elements are becoming increasingly more prevalent in optical systems. It is therefore important to be able to understand and model the behavior of these elements. In this report, we present a thorough analysis of a completely general diffractive optical element (DOE). The main goal of the analysis is to understand the diffraction efficiency and power distribution of the various modes affected by the DOE. This is critical to understanding cross talk and power issues when these elements are used in actual systems. As mentioned, the model is based on a completely general scenario for a DOE. This allows the user to specify the details to model a wide variety of diffractive elements. The analysis is implemented straightforwardly in Mathematica. This report includes the development of the analysis, the Mathematica implementation of the model and several examples using the Mathematical analysis tool. It is intended that this tool be a building block for more specialized analyses.

  11. ADVANTAGES OF DIFFRACTIVE OPTICAL ELEMENTS APPLICATION IN SIMPLE OPTICAL IMAGING SYSTEMS

    Directory of Open Access Journals (Sweden)

    N. D. Zoric

    2015-01-01

    Full Text Available The paper deals with the influence of diffractive optical elements on the optical aberrations. The correction of optical aberrations was investigated in the simple optical systems with one and two lenses (singlet and doublet. The advantages of diffractive optical elements are their ability to generate arbitrary complex wave fronts from a piece of optical material that is essentially flat. The optical systems consisting of the standard surfaces were designed and optimized by using the same starting points. Further, the diffractive and aspheric surfaces were introduced into the developed systems. The resulting hybrid systems were optimized. To compare the complicity of the development of narrow field systems and wide field optical systems, the optimization has been done separately for these two types of the instruments. The optical systems were designed by using special Optical Design Software. Тhe characteristics of designed diffractive surfaces were controlled in Software DIFSYS 2.30. Due to the application of diffractive optical elements the longitudinal chromatic aberration was 5 times reduced for the narrow field systems. The absolute value of Seidel coefficient related to the spherical aberration was reduced in the range of 0.03. Considering that diffractive optical elements have the known disadvantages, like possible parasitic diffraction orders and probable decrease of the transmission, we also developed and analyzed the optical systems with combined aspheric and diffractive surfaces. A combination of the aspheric and diffractive surfaces in the optical disk system of the disk reading lens, gave cutting down of the longitudinal color aberrations almost 15 times on-axis, comparing to the lens consisting of the aspherical and standard surfaces. All of the designed diffractive optical elements possess the parameters within the fabrication limits.

  12. Deriving covariant holographic entanglement

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Xi [School of Natural Sciences, Institute for Advanced Study, Princeton, NJ 08540 (United States); Lewkowycz, Aitor [Jadwin Hall, Princeton University, Princeton, NJ 08544 (United States); Rangamani, Mukund [Center for Quantum Mathematics and Physics (QMAP), Department of Physics, University of California, Davis, CA 95616 (United States)

    2016-11-07

    We provide a gravitational argument in favour of the covariant holographic entanglement entropy proposal. In general time-dependent states, the proposal asserts that the entanglement entropy of a region in the boundary field theory is given by a quarter of the area of a bulk extremal surface in Planck units. The main element of our discussion is an implementation of an appropriate Schwinger-Keldysh contour to obtain the reduced density matrix (and its powers) of a given region, as is relevant for the replica construction. We map this contour into the bulk gravitational theory, and argue that the saddle point solutions of these replica geometries lead to a consistent prescription for computing the field theory Rényi entropies. In the limiting case where the replica index is taken to unity, a local analysis suffices to show that these saddles lead to the extremal surfaces of interest. We also comment on various properties of holographic entanglement that follow from this construction.

  13. Holographic X-ray optical elements: transition between refraction and diffraction

    CERN Document Server

    Snigireva, I; Rau, C; Weitkamp, T; Aristov, V; Grigoriev, M; Kuznetsov, S; Shabelnikov, L; Yunkin, V; Hoffmann, M; Voges, E

    2001-01-01

    Planar microelectronics technology, involving photolithography and highly anisotropic plasma etching techniques, was applied to fabricate refractive and diffractive (kinoform) lenses. Focusing properties in terms of focus spot and efficiency in the energy range 8-25 keV for both types of lenses were tested at the European Synchrotron Radiation Facility (ESRF) ID22 beamline. Focal spot of 1.5 mu m with a gain of 25 was measured at 15 keV.

  14. Bandwidth- and angle-selective holographic films for solar energy applications

    Science.gov (United States)

    Stojanoff, Christo G.; Schulat, Jochen; Eich, Michael

    1999-10-01

    The objective of this research program is the development of the technology for the industrial fabrication of large format holographic optical elements (HOEs) with predetermined spectral characteristics and angular selectivity. HOEs of this type are used in a variety of technical applications, such as: holographic concentrators for photo-voltaic energy conversion and solar photo- chemistry or as integrated holographic stacks compromising several holograms operating in different ranges of the solar spectrum for daylighting, glazing and shading in buildings. The latter are required for the effective control of the transmission of solar radiation through the windows or the glass curtain wall envelopes of buildings. The HOEs (reflective or transmissive) are recorded in dichromated gelatin layers deposited on glass or plastic substrates. This material and the corresponding thermochemical development process facilitate the achievement of bandwidths, spectral ranges and angular selectivity that match accurately the design spectral and geometrical properties of a particular application.

  15. Analysis of data recorder optical scheme impact on quality of computer generated Fourier holograms in holographic memory system

    Science.gov (United States)

    Donchenko, Sergey S.; Odinokov, Sergey B.; Verenikina, Nina M.; Betin, Alexandr U.; Hanevich, Pavel; Zlokazov, Evgenii Y.

    2017-05-01

    Holographic memory systems provide such advantages as long data storage term, high data density and do not need a power supply. Instead of recording interference pattern, it is proposed to record computer generated 1D Fourier holograms (CGFH). High information density is reached by multiplexing 1D Fourier Holograms. In this work factors, which impact the quality of recorded CGFH are analyzed in mathematical modelling and experimental researches.

  16. Pinning of holographic sliding stripes

    Science.gov (United States)

    Jokela, Niko; Järvinen, Matti; Lippert, Matthew

    2017-11-01

    In a holographic probe-brane model exhibiting a spontaneously spatially modulated ground state, we introduce explicit sources of symmetry breaking in the form of ionic and antiferromagnetic lattices. For the first time in a holographic model, we demonstrate pinning, in which the translational Goldstone mode is lifted by the introduction of explicit sources of translational symmetry breaking. The numerically computed optical conductivity fits very well to a Drude-Lorentz model with a small residual metallicity, precisely matching analytic formulas for the DC conductivity. We also find an instability of the striped phase in the presence of a large-amplitude ionic lattice.

  17. Analog of Optical Elements for Sound Waves in Air

    Science.gov (United States)

    Gluck, Paul; Perkalskis, Benjamin

    2009-01-01

    Optical elements manipulate light waves. They may be used to focus the light or to change the phase, the polarization, the direction, or the intensity of light. Many of these functions are often demonstrated with microwaves, since the devices normally available in teaching laboratories produce wavelengths in the centimeter range and are therefore…

  18. Volume holographic memory

    Directory of Open Access Journals (Sweden)

    Cornelia Denz

    2000-05-01

    Full Text Available Volume holography represents a promising alternative to existing storage technologies. Its parallel data storage leads to high capacities combined with short access times and high transfer rates. The design and realization of a compact volume holographic storage demonstrator is presented. The technique of phase-coded multiplexing implemented to superimpose many data pages in a single location enables to store up to 480 holograms per storage location without any moving parts. Results of analog and digital data storage are shown and real time optical image processing is demonstrated.

  19. Laser adaptive holographic hydrophone

    Energy Technology Data Exchange (ETDEWEB)

    Romashko, R V; Kulchin, Yu N; Bezruk, M N; Ermolaev, S A [Institute of Automation and Control Processes, Far Eastern Branch of the Russian Academy of Sciences, Vladivostok (Russian Federation)

    2016-03-31

    A new type of a laser hydrophone based on dynamic holograms, formed in a photorefractive crystal, is proposed and studied. It is shown that the use of dynamic holograms makes it unnecessary to use complex optical schemes and systems for electronic stabilisation of the interferometer operating point. This essentially simplifies the scheme of the laser hydrophone preserving its high sensitivity, which offers the possibility to use it under a strong variation of the environment parameters. The laser adaptive holographic hydrophone implemented at present possesses the sensitivity at a level of 3.3 mV Pa{sup -1} in the frequency range from 1 to 30 kHz. (laser hydrophones)

  20. Conformal optical elements for correcting wavefront distortions in YAG : Nd{sup 3+} active elements

    Energy Technology Data Exchange (ETDEWEB)

    Korolkov, V P; Nasyrov, R K; Poleshchuk, A G; Arapov, Yu D; Ivanov, A F

    2013-02-28

    Correction of the wavefront is studied for the light beam passing wide-aperture YAG : Nd3+ single-crystal rods, which are used as active elements in high-power solid-state lasers. A nonideal character of the crystal structure is responsible for the deformation of the wavefront of passing radiation. By using the halftone technology we have developed conformal aberration correctors capable of compensating rod nonuniformities and reducing the laser radiation divergence by an order of magnitude. The results obtained make it possible to employ optically nonuniform active elements in laser constructions. (laser optics 2012)

  1. Holographic Cosmology

    OpenAIRE

    Banks, T.; Fischler, W.

    2004-01-01

    We describe a cosmology of the very early universe, based on the holographic principle of 't Hooft and Susskind. We have described the initial state as a dense black hole fluid. Here we present a mathematical model of this heuristic picture, as well as a non-rigorous discussion of how a more normal universe could evolve out of such a state. The gross features of the cosmology depend on a few parameters, which cannot yet be calculated from first principles. For some range of these parameters, ...

  2. Optimisation and coupling of high-performance photocyclic initiating systems for efficient holographic materials (Conference Presentation)

    Science.gov (United States)

    Ley, Christian; Carré, Christian; Ibrahim, Ahmad; Allonas, Xavier

    2017-05-01

    For fabrication of diffractive optical elements or for holographic data storage, photopolymer materials have turned out to be serious candidates, taking into account their performances such as high spatial resolution, dry processing capability, ease of use, high versatility. From the chemical point of view, several organic materials are able to exhibit refractive index changes resulting from polymerization, crosslinking or depolymerization, such as mixtures of monomers with several reactive functions and oligomers, associated to additives, fillers and to a photoinitiating system (PIS). In this work, the efficiencies of two and three component PIS as holographic recording materials are analyzed in term of photopolymerization kinetics and diffraction yield. The selected systems are based on visible dyes, electron donor and electron acceptor. In order to investigate the influence of the photophysical properties of dye on the holographic recording material performance time resolved and steady state spectroscopic studies of the PIS are presented. This detailed photochemical studies of the PIS outline the possible existence of photocyclic initiating systems (PCIS) where the dye is regenerated during the chemical process. Simultaneously, these visible systems are associated to fluorinated acrylate monomers for the recording of transmission gratings. To get more insight into the hologram formation, gratings' recording curves were compared to those of monomer to polymer conversion obtained by real time Fourier transform infrared spectroscopy. This work outlines the importance of the coupling of the the photochemical reactions and the holographic resin. Moreover the application of the PCIS in holographic recording outlines the importance of the photochemistry on final holographic material properties: here a sensitive material with high diffraction yield is described. Indeed, this work outlines the importance of the coupling between the photochemistry underlying the radicals

  3. Improvement of holographic sensing response in substrate-free acrylamide photopolymer.

    Science.gov (United States)

    Zhou, Ke; Geng, Yaohui; Liu, Hongpeng; Wang, Shichan; Mao, Dongyao; Yu, Dan

    2017-05-01

    A novel substrate-free acrylamide photopolymer was proposed to improve holographic sensing characterization. The diffraction spectrum response of reflection volume grating recorded in the medium was characterized for exploring the improvement of sensitivity. The compared result indicated that the response rate and sensitivity were evidently improved by absorption of double surface in substrate-free polymer. The thickness of the sample as a significant factor was discussed in detail experimentally. During the sensing process, the inhibition concentration and concentration constant of organic vapor were extracted to evaluate the significance of sample thickness. Simultaneously, optimization of thickness could be considered as an effective approach to improve the response rate of holographic sensing. The reversibility of a novel holographic sensor with double surface was demonstrated by recovery measurement. The swelling ratio indicated that the peak wavelength shift was attributed to the expansion of binder induced by absorption of organic vapor. Theoretically, the sensing physical mechanism and the dynamic swelling process were analyzed and simulated using a diffusional model with nonlocal response. These experimental results provide an effective strategy for improving the response of a holographic sensor and accelerate the development of the holographic optical element based on photopolymer.

  4. MERTIS: geometrical calibration of thermal infrared optical system by applying diffractive optical elements

    Science.gov (United States)

    Bauer, M.; Baumbach, D.; Buder, M.; Börner, A.; Grießbach, D.; Peter, G.; Santier, E.; Säuberlich, T.; Schischmanow, A.; Schrader, S.; Walter, I.

    2015-09-01

    Geometrical sensor calibration is essential for space applications based on high accuracy optical measurements, in this case for the thermal infrared push-broom imaging spectrometer MERTIS. The goal is the determination of the interior sensor orientation. A conventional method is to measure the line of sight for a subset of pixels by single pixel illumination with collimated light. To adjust angles, which define the line of sight of a pixel, a manipulator construction is used. A new method for geometrical sensor calibration is using Diffractive Optical Elements (DOE) in connection with laser beam equipment. Diffractive optical elements (DOE) are optical microstructures, which are used to split an incoming laser beam with a dedicated wavelength into a number of beams with well-known propagation directions. As the virtual sources of the diffracted beams are points at infinity, the resulting image is invariant against translation. This particular characteristic allows a complete geometrical sensor calibration with only one taken image avoiding complex adjustment procedures, resulting in a significant reduction of calibration effort. We present a new method for geometrical calibration of a thermal infrared optical system, including an thermal infrared test optics and the MERTIS spectrometer bolometer detector. The fundamentals of this new approach for geometrical infrared optical systems calibration by applying diffractive optical elements and the test equipment are shown.

  5. Unified system for holographic measurement in fluid and solid mechanics: application of the system to volumetric flow measurement in an internal combustion engine

    Science.gov (United States)

    Chan, Victor S. S.; Barnhart, Donald H.; Garner, Colin P.; Halliwell, Neil A.; Coupland, Jeremy M.

    1999-10-01

    This paper reports holographic measurements of full-field 3D flows inside a production geometry 4-stoke internal combustion engine with extensive optical access through both the cylinder wall and the piston crown. The seeded flow is recorda at two instants as a reflection hologram of high numerical aperture. A purpose built holographic camera using a phase conjugate holographic optical element is used to compensate for the gross aberrations caused by imaging through a thick walled, glass cylinder. Fiber-optic, conjugate recognition and subsequent correlation of the complex amplitude recorded by the hologram facilitates sub- wavelength measurement of particle displacement without directional ambiguity. Preliminary measurements of the flow field within the cylinder at the bottom of the induction stroke are discussed. The results clearly show the potential of this technique to extract 3D velocity information in hostile environments.

  6. Three-dimensional motion-picture imaging of dynamic object by parallel-phase-shifting digital holographic microscopy using an inverted magnification optical system

    Science.gov (United States)

    Fukuda, Takahito; Shinomura, Masato; Xia, Peng; Awatsuji, Yasuhiro; Nishio, Kenzo; Matoba, Osamu

    2017-04-01

    We constructed a parallel-phase-shifting digital holographic microscopy (PPSDHM) system using an inverted magnification optical system, and succeeded in three-dimensional (3D) motion-picture imaging for 3D displacement of a microscopic object. In the PPSDHM system, the inverted and afocal magnification optical system consisted of a microscope objective (16.56 mm focal length and 0.25 numerical aperture) and a convex lens (300 mm focal length and 82 mm aperture diameter). A polarization-imaging camera was used to record multiple phase-shifted holograms with a single-shot exposure. We recorded an alum crystal, sinking down in aqueous solution of alum, by the constructed PPSDHM system at 60 frames/s for about 20 s and reconstructed high-quality 3D motion-picture image of the crystal. Then, we calculated amounts of displacement of the crystal from the amounts in the focus plane and the magnifications of the magnification optical system, and obtained the 3D trajectory of the crystal by that amounts.

  7. All-optically controllable distributed feedback laser in a dye-doped holographic polymer-dispersed liquid crystal grating with a photoisomerizable dye.

    Science.gov (United States)

    Tong, Huai-Pei; Li, Yu-Ren; Lin, Jia-De; Lee, Chia-Rong

    2010-02-01

    This work demonstrates, for the first time, an all-optically controllable distributed feedback (DFB) laser based on a dye-doped holographic polymer-dispersed liquid crystal (DDHPDLC) grating with a photoisomerizable dye. Intensity of the lasing emission can be reduced and increased by raising the irradiation intensity of one CW circularly-polarized green beam and the irradiation time of one CW circularly-polarized red beam, respectively. The all-optical controllability of the lasing emission is owing to the green-beam-induced isothermal nematic-->isotropic and red-beam-induced isothermal isotropic-->nematic phase transitions of the LCs via trans-->cis and cis-->trans back isomerizations of the azo-dye, respectively, in the LC-droplet-rich regions of the grating. The former (latter) mechanism can reduce (increase) the index modulation and thereby the coupling strength in the DFB grating, resulting in the decay (rise) of the lasing emission. Thermal effect is excluded from possible mechanisms causing such an optical controllability of the lasing emission.

  8. Diffractive optical element embedded in silver-doped nanocomposite glass.

    Science.gov (United States)

    Fleming, Lauren A H; Wackerow, Stefan; Hourd, Andrew C; Gillespie, W Allan; Seifert, Gerhard; Abdolvand, Amin

    2012-09-24

    A diffractive optical element is fabricated with relative ease in a glass containing spherical silver nanoparticles 30 to 40 nm in diameter and embedded in a surface layer of thickness ~10 μm. The nanocomposite was sandwiched between a mesh metallic electrode with a lattice constant 2 μm, facing the nanoparticle containing layer and acting as an anode, and a flat metal electrode as cathode. Applying moderate direct current electric potentials of 0.4 kV and 0.6 kV at an elevated temperature of 200 °C for 30 minutes across the nanocomposites led to the formation of a periodic array of embedded structures of metallic nanoparticles. The current-time dynamics of the structuring processes, optical analyses of the structured nanocomposites and diffraction pattern of one such fabricated element are presented.

  9. Comparison of Gini index and Tamura coefficient for holographic autofocusing based on the edge sparsity of the complex optical wavefront

    KAUST Repository

    Tamamitsu, Miu

    2017-08-27

    The Sparsity of the Gradient (SoG) is a robust autofocusing criterion for holography, where the gradient modulus of the complex refocused hologram is calculated, on which a sparsity metric is applied. Here, we compare two different choices of sparsity metrics used in SoG, specifically, the Gini index (GI) and the Tamura coefficient (TC), for holographic autofocusing on dense/connected or sparse samples. We provide a theoretical analysis predicting that for uniformly distributed image data, TC and GI exhibit similar behavior, while for naturally sparse images containing few high-valued signal entries and many low-valued noisy background pixels, TC is more sensitive to distribution changes in the signal and more resistive to background noise. These predictions are also confirmed by experimental results using SoG-based holographic autofocusing on dense and connected samples (such as stained breast tissue sections) as well as highly sparse samples (such as isolated Giardia lamblia cysts). Through these experiments, we found that ToG and GoG offer almost identical autofocusing performance on dense and connected samples, whereas for naturally sparse samples, GoG should be calculated on a relatively small region of interest (ROI) closely surrounding the object, while ToG offers more flexibility in choosing a larger ROI containing more background pixels.

  10. Micro structured coupling elements for 3D silicon optical interposer

    Science.gov (United States)

    Charania, Sujay; Lüngen, Sebastian; Al-Husseini, Zaid; Killge, Sebastian; Nieweglowski, Krzysztof; Neumann, Niels; Plettemeier, Dirk; Bock, Karlheinz; Bartha, Johann W.

    2017-05-01

    Current trends in electronic industry, such as Internet of Things (IoT) and Cloud Computing call for high interconnect bandwidth, increased number of active devices and high IO count. Hence the integration of on silicon optical waveguides becomes an alternative approach to cope with the performance demands. The application and fabrication of horizontal (planar) and vertical (Through Silicon Vias - TSVs) optical waveguides are discussed here. Coupling elements are used to connect both waveguide structures. Two micro-structuring technologies for integration of coupling elements are investigated: μ-mirror fabrication by nanoimprint (i) and dicing technique (ii). Nanoimprint technology creates highly precise horizontal waveguides with polymer (refractive index nC = 1.56 at 650 nm) as core. The waveguide ends in reflecting facets aligned to the optical TSVs. To achieve Total Internal Reflection (TIR), SiO2 (nCl = 1.46) is used as cladding. TSVs (diameter 20-40μm in 200-380μm interposer) are realized by BOSCH process1, oxidation and SU-8 filling techniques. To carry out the imprint, first a silicon structure is etched using a special plasma etching process. A polymer stamp is then created from the silicon template. Using this polymer stamp, SU-8 is imprinted aligned to vertical TSVs over Si surface.Waveguide dicing is presented as a second technology to create coupling elements on polymer waveguides. The reflecting mirror is created by 45° V-shaped dicing blade. The goal of this work is to develop coupling elements to aid 3D optical interconnect network on silicon interposer, to facilitate the realization of the emerging technologies for the upcoming years.

  11. Texture information processing system with binary optical wavelet element

    Science.gov (United States)

    Feng, Wenyi; Yan, Yingbai; Jin, Guofan; Wang, Wenlu; Wu, Minxian

    1996-12-01

    The implementation strategy of optical wavelet transform for texture information processing is discussed in this paper. An opto-electronic hybrid system is constructed for texture segmentation, which is based on the multi-channel filtering framework in the early stages of human visual theory. First, a traditional optical system with a Damman grating as the beam splitter and a bank of Gabor wavelets as the channel filters is set up for feature extraction, and several clustering algorithms are then used for feature integration. Furthermore, a novel binary optical element with the functions of splitting, filtering and imaging is designed and fabricated to simplify the traditional system. The experimental results and the primary applications are also provided.

  12. Temperature control system for optical elements in astronomical instrumentation

    Science.gov (United States)

    Verducci, Orlando; de Oliveira, Antonio C.; Ribeiro, Flávio F.; Vital de Arruda, Márcio; Gneiding, Clemens D.; Fraga, Luciano

    2014-07-01

    Extremely low temperatures may damage the optical components assembled inside of an astronomical instrument due to the crack in the resin or glue used to attach lenses and mirrors. The environment, very cold and dry, in most of the astronomical observatories contributes to this problem. This paper describes the solution implemented at SOAR for remotely monitoring and controlling temperatures inside of a spectrograph, in order to prevent a possible damage of the optical parts. The system automatically switches on and off some heat dissipation elements, located near the optics, as the measured temperature reaches a trigger value. This value is set to a temperature at which the instrument is not operational to prevent malfunction and only to protect the optics. The software was developed with LabVIEWTM and based on an object-oriented design that offers flexibility and ease of maintenance. As result, the system is able to keep the internal temperature of the instrument above a chosen limit, except perhaps during the response time, due to inertia of the temperature. This inertia can be controlled and even avoided by choosing the correct amount of heat dissipation and location of the thermal elements. A log file records the measured temperature values by the system for operation analysis.

  13. Holographic versatile disc system

    Science.gov (United States)

    Horimai, Hideyoshi; Tan, Xiaodi

    2005-09-01

    A Holographic Versatile Disc (HVD) system, using Collinear Technologies for a high capacity and high data transfer rates storage system, is proposed. With its unique configuration the optical pickup can be designed as small as a DVD's, and can be placed on one side of the disc. With the HVD's special structure, the system can servo the focus/track and locate reading/writing address. A unique selectable capacity recording format of HVD and its standardization activity are also introduced. Experimental and theoretical studies suggest that the tilt, wavelength, defocus and de-track margins are wide enough to miniaturize the HVD system at a low cost. HVD systems using Collinear Technologies will be compatible with existing disc storage systems, like CD and DVD, and will enable us to expand its applications into other optical information storage systems.

  14. Holographic technidilaton

    Science.gov (United States)

    Haba, Kazumoto; Matsuzaki, Shinya; Yamawaki, Koichi

    2010-09-01

    Technidilaton, a pseudo-Nambu-Goldstone boson of scale symmetry, was predicted long ago in the scale-invariant/walking/conformal technicolor (SWC-TC) as a remnant of the (approximate) scale symmetry associated with the conformal fixed point, based on the conformal gauge dynamics of ladder Schwinger-Dyson (SD) equation with nonrunning coupling. We study the technidilaton as a flavor-singlet bound state of technifermions by including the technigluon condensate (tGC) effect into the previous (bottom-up) holographic approach to the SWC-TC, a deformation of the holographic QCD with γm≃0 by large anomalous dimension γm≃1. With including a bulk scalar field corresponding to the gluon condensate, we first improve the operator product expansion of the current correlators so as to reproduce gluonic 1/Q4 term both in QCD and SWC-TC. We find in QCD about 10% (negative) contribution of gluon condensate to the ρ meson mass. We also calculate the oblique electroweak S-parameter in the presence of the effect of the tGC and find that for the fixed value of S the tGC effects dramatically reduce the flavor-singlet scalar (technidilaton) mass MTD (in the unit of Fπ), while the vector and axial-vector masses Mρ and Ma1 are rather insensitive to the tGC, where Fπ is the decay constant of the technipion. If we use the range of values of tGC implied by the ladder SD analysis of the nonperturbative scale anomaly in the large Nf QCD near the conformal window, the phenomenological constraint S≃0.1 predicts the technidilaton mass MTD˜600GeV which is within reach of LHC discovery.

  15. Micro-optical elements and optical materials of certain spider webs

    Science.gov (United States)

    Kane, D. M.; Naidoo, N.; Little, D. J.

    2012-06-01

    Certain spider webs are composed of several types of micro-optical elements made from transparent optical materials. The silks (radial and capture) are almost exclusively protein. The nearly cylindrical silks have diameters in the range 0.1 to several microns and cross-sectional morphology that is cylindrical-multi-layered,.as studied by transmission electron microscopy, The capture threads are coated with aqueous adhesive that also forms into nearly elliptical micro-lenses (adhesive droplets) mounted on the near cylindrical silks. The remaining elements of the web are the cement junctions tying the radial and the capture threads of the web together. These are irregularly shaped platelets. Progress to date on our research characterizing the optical properties and function of these transparent orb webs has been to interpret the reflection and transmission properties of the elements of the web, and the web as a whole, in natural lighting; to evaluate the optical finish of the surface of the silks and capture droplets; and to measure the principal refractive indices of radial silks using new immersion based methods developed for application to micron-sized, curved optical elements. Here we report the principal refractive indices, birefringence, dispersion and morphology of transparent spider silk subject to various chemical treatments. The morphology is measured using TEM. Insight into the physical origin of the refractive index properties will be discussed.

  16. Moving through a multiplex holographic scene

    Science.gov (United States)

    Mrongovius, Martina

    2013-02-01

    This paper explores how movement can be used as a compositional element in installations of multiplex holograms. My holographic images are created from montages of hand-held video and photo-sequences. These spatially dynamic compositions are visually complex but anchored to landmarks and hints of the capturing process - such as the appearance of the photographer's shadow - to establish a sense of connection to the holographic scene. Moving around in front of the hologram, the viewer animates the holographic scene. A perception of motion then results from the viewer's bodily awareness of physical motion and the visual reading of dynamics within the scene or movement of perspective through a virtual suggestion of space. By linking and transforming the physical motion of the viewer with the visual animation, the viewer's bodily awareness - including proprioception, balance and orientation - play into the holographic composition. How multiplex holography can be a tool for exploring coupled, cross-referenced and transformed perceptions of movement is demonstrated with a number of holographic image installations. Through this process I expanded my creative composition practice to consider how dynamic and spatial scenes can be conveyed through the fragmented view of a multiplex hologram. This body of work was developed through an installation art practice and was the basis of my recently completed doctoral thesis: 'The Emergent Holographic Scene — compositions of movement and affect using multiplex holographic images'.

  17. Switchable circular-to-point converter based on holographic polymer-dispersed liquid-crystal technology.

    Science.gov (United States)

    Zhang, Hailiang; Xianyu, Haiqing; Liang, Jianhua; Bétrémieux, Yan; Crawford, Gregory P; Noto, John; Kerr, Robert

    2007-01-10

    We demonstrate the use of a switchable circular-to-point converter (SCPC) device based on holographic polymer-dispersed liquid-crystal technology for application in lidar detection and optical telecommunication. A SCPC device converts the Fabry-Perot ring pattern into a single point or an array of points, while an external electrical field on the SCPC deactivates the conversion. Stacking different SCPC elements gives a random optical switch for applications in lidar detection and optical telecommunication. Two types of SCPC designs are analyzed and one is chosen and built for testing.

  18. Rapid calibration of a projection-type holographic light-field display using hierarchically upconverted binary sinusoidal patterns.

    Science.gov (United States)

    Nakamura, Tomoya; Yamaguchi, Masahiro

    2017-12-01

    A projection-type holographic light-field (LF) display is a full-parallax, full-color, and glass-free three-dimensional (3D) display with a holographic optical element and a projector. The display has unique characteristics, including transparency; however, a rapid calibration method has not yet been established. In this paper, we propose a rapid calibration method for a holographic LF display without sacrificing its accuracy. The proposed method performs calibration via the projection of binary sinusoidal patterns whose frequencies are iteratively and hierarchically upconverted. Compared to the conventional method, in the proposed method, the required number of projections is reduced from linear to logarithmic with the projector's resolution. We confirm the successful reconstruction of the 3D image using the proposed method.

  19. Digital holographic microscopy

    Science.gov (United States)

    Barkley, Solomon; Dimiduk, Thomas; Manoharan, Vinothan

    Digital holographic microscopy is a 3D optical imaging technique with high temporal ( ms) and spatial ( 10 nm) precision. However, its adoption as a characterization technique has been limited due to the inherent difficulty of recovering 3D data from the holograms. Successful analysis has traditionally required substantial knowledge about the sample being imaged (for example, the approximate positions of particles in the field of view), as well as expertise in scattering theory. To overcome the obstacles to widespread adoption of holographic microscopy, we developed HoloPy - an open source python package for analysis of holograms and scattering data. HoloPy uses Bayesian statistical methods to determine the geometry and properties of discrete scatterers from raw holograms. We demonstrate the use of HoloPy to measure the dynamics of colloidal particles at interfaces, to ascertain the structures of self-assembled colloidal particles, and to track freely swimming bacteria. The HoloPy codebase is thoroughly tested and well-documented to facilitate use by the broader experimental community. This research is supported by NSF Grant DMR-1306410 and NSERC.

  20. Photopolymerizable Nanocomposites for Holographic Applications

    OpenAIRE

    Leite, Elsa

    2010-01-01

    Photopolymerizable nanocomposites with good optical properties consisting of an acrylamide based photopolymer and zeolite nanoparticles (Beta, zeolite A, AlPO-18, silicalite-1 and zeolite L) were fabricated and characterized for holographic applications. The colloidal zeolite solutions used in this project were characterized by several techniques including X-Ray Diffraction (XRD), Dynamic Light Scattering (DLS), Scanning Electron Microscopy (SEM) and Raman spectroscopy to ensure their success...

  1. James Webb Space Telescope Optical Telescope Element Mirror Coatings

    Science.gov (United States)

    Keski-Kuha, Ritva A.; Bowers, Charles W.; Quijada, Manuel A.; Heaney, James B.; Gallagher, Benjamin; McKay, Andrew; Stevenson, Ian

    2012-01-01

    James Webb Space Telescope (JWST) Optical Telescope Element (OTE) mirror coating program has been completed. The science goals of the JWST mission require a uniform, low stress, durable optical coating with high reflectivity over the JWST spectral region. The coating has to be environmentally stable, radiation resistant and compatible with the cryogenic operating environment. The large size, 1.52 m point to point, light weight, beryllium primary mirror (PM) segments and flawless coating process during the flight mirror coating program that consisted coating of 21 flight mirrors were among many technical challenges. This paper provides an overview of the JWST telescope mirror coating program. The paper summarizes the coating development program and performance of the flight mirrors.

  2. Two-photon imaging with diffractive optical elements

    Directory of Open Access Journals (Sweden)

    Brendon O Watson

    2009-07-01

    Full Text Available Two-photon imaging has become a useful tool for optical monitoring of neural circuits, but it requires high laser power and serial scanning of each pixel in a sample. This results in slow imaging rates, limiting the measurements of fast signals such as neuronal activity. To improve the speed and signal-to-noise ratio of two-photon imaging, we introduce a simple modification of a two-photon microscope, using a diffractive optical element (DOE which splits the laser beam into several beamlets that can simultaneously scan the sample. We demonstrate the advantages of DOE scanning by enhancing the speed and sensitivity of two-photon calcium imaging of action potentials in neurons from neocortical brain slices. DOE scanning can easily improve the detection of time-varying signals in two-photon and other non-linear microscopies.

  3. Study of virtual displays based on raster optical elements

    Science.gov (United States)

    Ryu, Jaeyeol; Putilin, A. N.

    2018-01-01

    The paper is devoted to the study of the ultimate resolution of virtual displays with raster systems. Raster systems in such displays are used for an essential reduction of their longitudinal overall dimensions. Three schemes are considered: in the first one each element of the raster system forms an image of one pixel only, in the second one each element of the raster system forms a small part of a virtual image, the third scheme is analogous to the first one, but is implemented in the form of a contact lens. For each scheme, we analyse the overall dimensions of the optical system and the characteristics of the virtual image, i.e., the ultimate resolution and the nonuniformity of its illumination.

  4. Peptide oligomers for holographic data storage

    DEFF Research Database (Denmark)

    Berg, Rolf Henrik; Hvilsted, Søren; Ramanujam, P.S.

    1996-01-01

    chromophores-which appear particularly promising for erasable holographic data storage applications. The rationale for our approach is to use the structural properties of peptide-like molecules to impose orientational order on the chromophores, and thereby optimize the optical properties of the resulting...... materials. Here we show that holographic gratings with large first-order diffraction efficiencies (up to 80%) can be written and erased optically in oligomer films only a few micrometres thick. The holograms also exhibit good thermal stability, and are not erased after heating to 180 degrees C for one month...

  5. Holograms for laser diode: Single mode optical fiber coupling

    Science.gov (United States)

    Fuhr, P. L.

    1982-01-01

    The low coupling efficiency of semiconductor laser emissions into a single mode optical fibers place a severe restriction on their use. Associated with these conventional optical coupling techniques are stringent alignment sensitivities. Using holographic elements, the coupling efficiency may be increased and the alignment sensitivity greatly reduced. Both conventional and computer methods used in the generation of the holographic couplers are described and diagrammed. The reconstruction geometries used are shown to be somewhat restrictive but substantially less rigid than their conventional optical counterparts. Single and double hologram techniques are examined concerning their respective ease of fabrication and relative merits.

  6. Formation of temperature dependable holographic memory using holographic polymer-dispersed liquid crystal.

    Science.gov (United States)

    Ogiwara, Akifumi; Watanabe, Minoru; Moriwaki, Retsu

    2013-04-01

    Grating devices using photosensitive organic materials play an important role in the development of optical and optoelectronic systems. High diffraction efficiency and polarization dependence achieved in a holographic polymer-dispersed liquid crystal (HPDLC) grating are expected to provide polarization controllable optical devices, such as the holographic memory for optically reconfigurable gate arrays (ORGAs). However, the optical property is affected by the thermal modulation around the transition temperature (T(ni)) that the liquid crystal (LC) changes from nematic to isotropic phases. The temperature dependence of the diffraction efficiency in HPDLC grating is discussed with two types of LC composites comprised of isotropic and LC diacrylate monomers. The holographic memory formed by the LC and LC diacrylate monomer performs precise reconstruction of the context information for ORGAs at high temperatures more than 150°C.

  7. Recording digital holograms of optically transparent objects in arbitrary spectral intervals based on acousto-optic filtration of radiation

    Science.gov (United States)

    Machikhin, A. S.; Polschikova, O. V.; Ramazanova, A. G.; Pozhar, V. E.

    2015-10-01

    The problem of obtaining digital holographic images of optically transparent objects in arbitrary spectral intervals is considered. A Mach-Zehnder interferometer based optical scheme with acousto-optic spectral filtration of the broadband radiation is presented. The spectral selection allows one to increase the informativeness of digital holograms due to the choice of spectral channels in which elements with different physico-chemical properties have a sufficient contrast. Examples of recorded spectral holographic images of a test object and real objects are presented.

  8. Virtual Mie particle model of laser damage to optical elements

    Directory of Open Access Journals (Sweden)

    Kazuya Hirata

    2011-12-01

    Full Text Available In recent years, devices being developed for application systems have used laser beams that have high average power, high peak power, short pulse width, and short wavelength. Therefore, optical elements using such application systems require a high laser damage threshold. The laser damage threshold is provided by International Organization for Standardization 11254 (ISO11254. One of the measurement methods of the laser damage threshold provided by ISO11254 is an online method to measure the intensity of light scattering due to a laser damage trace. In this paper, we propose a measurement method for the laser damage threshold that realizes high sensitivity and high accuracy by using polarized light and lock-in detection. Since the scattering light with laser damage is modeled on the asperity of the optical element-surface as Mie particles (virtual Mie particles, we consider the intensity change of scattering light as a change in the radius of a virtual Mie particle. To evaluate this model, the laser damage trace on the optical element-surface was observed by an atomic force microscopy (AFM. Based on the observed AFM image, we analyzed the frequency domain by the Fourier transform, and estimated the dominant virtual Mie particle radius in the AFM measurement area. In addition, we measured the laser damage threshold. The light source was the fifth generation of a Nd:YAG laser (λ =213nm. The specifications of the laser were: repetition frequency 10Hz, pulse width 4ns, linear type polarization, laser pulse energy 4mJ, and laser transverse mode TEM00. The laser specifications were a repetition frequency, pulse width, pulse energy and beam diameter of 10Hz, 4ns, 4mJ and 13mm, respectively. The laser damage thresholds of an aluminum coated mirror and a dielectric multi-layer mirror designed at a wavelength of 213nm as measured by this method were 0.684 J/cm2 and 0.998J/cm2, respectively. These laser damage thresholds were 1/4 the laser damage

  9. Compositional Changes for Reduction of Polymerisation-Induced Shrinkage in Holographic Photopolymers

    Directory of Open Access Journals (Sweden)

    D. Cody

    2016-01-01

    Full Text Available Polymerisation-induced shrinkage is one of the main reasons why many photopolymer materials are not used for certain applications including holographic optical elements and holographic data storage. Here, two compositional changes for the reduction of shrinkage in an acrylamide-based photopolymer are reported. A holographic interferometric technique was used to study changes in the dynamics of the shrinkage processes occurring in the modified photopolymer during holographic recording in real time. Firstly, the effect of the replacement of the acrylamide monomer in the photopolymer composition with a larger monomer molecule, diacetone acrylamide, on polymerisation-induced shrinkage has been studied. A reduction in relative shrinkage of 10–15% is obtained using this compositional change. The second method tested for shrinkage reduction involved the incorporation of BEA-type zeolite nanoparticles in the acrylamide-based photopolymer. A reduction in relative shrinkage of 13% was observed for acrylamide photopolymer layers doped with 2.5% wt. BEA zeolites in comparison to the undoped photopolymer.

  10. Large holographic 3D display for real-time computer-generated holography

    Science.gov (United States)

    Häussler, R.; Leister, N.; Stolle, H.

    2017-06-01

    SeeReal's concept of real-time holography is based on Sub-Hologram encoding and tracked Viewing Windows. This solution leads to significant reduction of pixel count and computation effort compared to conventional holography concepts. Since the first presentation of the concept, improved full-color holographic displays were built with dedicated components. The hologram is encoded on a spatial light modulator that is a sandwich of a phase-modulating and an amplitude-modulating liquid-crystal display and that modulates amplitude and phase of light. Further components are based on holographic optical elements for light collimation and focusing which are exposed in photopolymer films. Camera photographs show that only the depth region on which the focus of the camera lens is set is in focus while the other depth regions are out of focus. These photographs demonstrate that the 3D scene is reconstructed in depth and that accommodation of the eye lenses is supported. Hence, the display is a solution to overcome the accommodationconvergence conflict that is inherent for stereoscopic 3D displays. The main components, progress and results of the holographic display with 300 mm x 200 mm active area are described. Furthermore, photographs of holographic reconstructed 3D scenes are shown.

  11. Biological elements carry out optical tasks in coherent imaging systems

    Science.gov (United States)

    Ferraro, P.; Bianco, V.; Paturzo, M.; Miccio, L.; Memmolo, P.; Merola, F.; Marchesano, V.

    2016-03-01

    We show how biological elements, like live bacteria species and Red Blood Cells (RBCs) can accomplish optical functionalities in DH systems. Turbid media allow coherent microscopy despite the strong light scattering these provoke, acting on light just as moving diffusers. Furthermore, a turbid medium can have positive effects on a coherent imaging system, providing resolution enhancement and mimicking the action of noise decorrelation devices, thus yielding an image quality significantly higher than the quality achievable through a transparent medium in similar recording conditions. Besides, suspended RBCs are demonstrated to behave as controllable liquid micro-lenses, opening new possibilities in biophotonics for endoscopy imaging purposes, as well as telemedicine for point-of-care diagnostics in developing countries and low-resource settings.

  12. Boundary element method for surface nonlinear optics of nanoparticles.

    Science.gov (United States)

    Mäkitalo, Jouni; Suuriniemi, Saku; Kauranen, Martti

    2011-11-07

    We present the frequency-domain boundary element formulation for solving surface second-harmonic generation from nanoparticles of virtually arbitrary shape and material. We use the Rao-Wilton-Glisson basis functions and Galerkin's testing, which leads to very accurate solutions for both near and far fields. This is verified by a comparison to a solution obtained via multipole expansion for the case of a spherical particle. The frequency-domain formulation allows the use of experimentally measured linear and nonlinear material parameters or the use of parameters obtained using ab-initio principles. As an example, the method is applied to a non-centrosymmetric L-shaped gold nanoparticle to illustrate the formation of surface nonlinear polarization and the second-harmonic radiation properties of the particle. This method provides a theoretically well-founded approach for modelling nonlinear optical phenomena in nanoparticles.

  13. Investigation of diffractive optical element femtosecond laser machining

    Energy Technology Data Exchange (ETDEWEB)

    Chabrol, Grégoire R., E-mail: g.chabrol@ecam-strasbourg.eu [ECAM Strasbourg-Europe, Espace Européen de l’entreprise, 2, rue de Madrid – 67300 SCHILTIGHEIM, CS. 20013, 67012 Strasbourg CEDEX (France); Laboratoire des Sciences de l’Ingénieur, de l’Informatique et de l’Imagerie (ICube), UDS-CNRS, UMR 7357, 300 bld Sébastien Brant, CS 10413, 67412 Illkirch cedex (France); Ciceron, Adline [ECAM Strasbourg-Europe, Espace Européen de l’entreprise, 2, rue de Madrid – 67300 SCHILTIGHEIM, CS. 20013, 67012 Strasbourg CEDEX (France); Laboratoire des Sciences de l’Ingénieur, de l’Informatique et de l’Imagerie (ICube), UDS-CNRS, UMR 7357, 300 bld Sébastien Brant, CS 10413, 67412 Illkirch cedex (France); Twardowski, Patrice; Pfeiffer, Pierre [Laboratoire des Sciences de l’Ingénieur, de l’Informatique et de l’Imagerie (ICube), UDS-CNRS, UMR 7357, 300 bld Sébastien Brant, CS 10413, 67412 Illkirch cedex (France); Télécom Physique Strasbourg – Pôle API – 300 Bd Sébastien Brant – CS 10413, Illkirch Graffenstaden F 67400 (France); and others

    2016-06-30

    Highlights: • A method for rapid manufacturing of optical diffractive element in BK7 is proposed. • A binary grating in BK7 was successfully machined by femtosecond laser pulses. • Process relying on nonlinear absorption in the dielectric due to photoionization. • The binary grating was analysed by SEM and interferometric microscopy. • Simulations by Fourier modal method supported the measured diffractive efficiency. - Abstract: This paper presents an explorative study on the machining of diffractive optical elements (DOEs) in transparent materials using a femtosecond laser source. A simple form of DOE, a binary phase grating with a period of 20.85 μm (σ = 0.5 μm), a groove depth and width of 0.7 μm (σ = 0.2 μm) and 8.8 μm (σ = 0.5 μm) respectively, was successfully machined in BK7. The topographic characteristics were measured by white light interferometry and scanning electron microscopy (SEM). The processing was carried out on high precision stages with an ultrafast fibre laser (350 fs) emitting a 343 nm pulse focused onto the sample with a stationary microscope objective. A diffracted efficiency of 27%, obtained with a spectro goniometer, was corroborated by the theoretical results obtained by the Fourier modal method (FMM), taking into account the measured topographic values. These encouraging results demonstrate that high-speed femtosecond laser manufacturing of DOE in bulk glasses can be achieved, opening the way to rapid prototyping of multi-layered-DOEs.

  14. Exploring Neural Cell Dynamics with Digital Holographic Microscopy

    KAUST Repository

    Marquet, Pierre

    2013-04-21

    In this talk, I will present how digital holographic microscopy, as a powerful quantitative phase technique, can non-invasively measure cell dynamics and especially resolve local neuronal network activity through simultaneous multiple site optical recording.

  15. Holographic Gratings in Azobenzene Side-Chain Polymethacrylates

    DEFF Research Database (Denmark)

    Andruzzi, Luisa; Altomare, Angelina; Ciardelli, Francesco

    1999-01-01

    Optical storage properties of thin unoriented liquid crystalline and amorphous side-chain azobenzene polymethacrylate films are examined by polarization holographic measurements. The investigated materials are free radical copolymers derived from two photochromic monomers, 6-(4-oxy-4...

  16. Sighting optics including an optical element having a first focal length and a second focal length and methods for sighting

    Science.gov (United States)

    Crandall, David Lynn

    2011-08-16

    Sighting optics include a front sight and a rear sight positioned in a spaced-apart relation. The rear sight includes an optical element having a first focal length and a second focal length. The first focal length is selected so that it is about equal to a distance separating the optical element and the front sight and the second focal length is selected so that it is about equal to a target distance. The optical element thus brings into simultaneous focus for a user images of the front sight and the target.

  17. Photomask fabrication of focusing diffractive optical elements using electron-beam lithography

    Science.gov (United States)

    Babin, Sergey V.; Danilov, Victor A.

    1995-06-01

    The electron beam lithography application to diffractive optical elements topology generation is examined. The formula for the estimation of exposure data volume for variable shaped electron beam lithography is presented as a function of diffractive optical element parameters and approximation accuracy. Special software was developed to prepare exposure data for diffractive optical elements fabrication. Diffractive optical elements with an artificial refractive index were manufactured with a feature size much less than the wavelength. Design and experimental results on photomasks fabrication are presented for an optical element focusing irradiation into a ring with ordered parameters. The photomask set was manufactured for reflecting optical element focusing high power CO2 laser beam into two points with required parameters for laser welding.

  18. Elemental mapping and microimaging by x-ray capillary optics.

    Science.gov (United States)

    Hampai, D; Dabagov, S B; Cappuccio, G; Longoni, A; Frizzi, T; Cibin, G; Guglielmotti, V; Sala, M

    2008-12-01

    Recently, many experiments have highlighted the advantage of using polycapillary optics for x-ray fluorescence studies. We have developed a special confocal scheme for micro x-ray fluorescence measurements that enables us to obtain not only elemental mapping of the sample but also simultaneously its own x-ray imaging. We have designed the prototype of a compact x-ray spectrometer characterized by a spatial resolution of less than 100 microm for fluorescence and less than 10 microm for imaging. A couple of polycapillary lenses in a confocal configuration together with a silicon drift detector allow elemental studies of extended samples (approximately 3 mm) to be performed, while a CCD camera makes it possible to record an image of the same samples with 6 microm spatial resolution, which is limited only by the pixel size of the camera. By inserting a compound refractive lens between the sample and the CCD camera, we hope to develop an x-ray microscope for more enlarged images of the samples under test.

  19. Medical applications of holographic stereograms

    Science.gov (United States)

    Tsujiuchi, Jumpei

    1991-02-01

    A method for displaying 3D images of medical objects by using holographic stereogram is described together with basic properties of reconstructed images of cylindrical holographic stereograms. INTRODUCTI ON A holographic stereogram (HS) is a synthesized hologram from an original film which consists of a series of ordinary photographs taken from different directions of an object and is possible to apply to an object whose hologram is very difficult or impossible to take with conventional techniques [U. Such a feature of HS can be used for 3D display of medical images such as X-ray images computer assisted tomogrphy (CT) images nuclear magnetic reasonance images (MRI) or ultrasonic images of a patient. CYLINDRICAL HOLOGRAPHI C STEREOGRAMS The original film of the medical HS is taken by rotating around the body axis of a patient a U-shaped arm equipment one end of which has a pulse X-ray source and the other end a movie camera with an image intensifier [2]. Synthesis of HS is carried out by using a special optical system the hologram is shaped into a cylinder and is reconstructed by illuminating the hologram with a small white light source located on the axis of the cylinder. Such a HS is called multiplex hologram (MH) the most popular HS and the reconstructed image can be observed in the cylinder. The formation of reconstructed image is made in unusual way and fundamental properties

  20. A finite element approach to x-ray optics design

    Science.gov (United States)

    Honkanen, A. P.; Ferrero, C.; Guigay, J. P.; Mocella, V.

    2017-05-01

    Dynamical diffraction in a deformed (often bent) crystal is described by the Takagi equations 1 which, in general, have to be solved numerically on a regular 2-D grid of points representing a planar cross section of the crystal in which the diffraction of an incident X-ray wavefront occurs . Presently, the majority of numerical approaches are based on a finite difference solving scheme2-4 which can be easily implemented on a regular Cartesian grid but is not suitable for deformed meshes. In this case, the inner deformed crystal structure can be taken into account, but not the shape of the crystal surface if this differs substantially from a planar profile 5,6. Conversely, a finite element method (FEM) can be easily applied to a deformed mesh and serves very well to the purpose of modelling any incident wave on an arbitrarily shaped entrance surface 7 e.g. that of a bent crystal or a crystal submitted to a strong heat load 8-10. For instance, the cylindrical shape of the surface of a strongly bent crystal plate can easily be taken into account in a FEM calculation. Bent crystals are often used as focusing optical elements in Xray beamlines 11-13. In the following, we show the implementation of a general numerical framework for describing the propagation of X-rays inside a crystal based on the solution of the Takagi equations via the COMSOL Multiphysics FEM software package (www.comsol.com). A cylindrically bent crystal will be taken as an example to illustrate the capabilities of the new approach.

  1. The holographic universe

    NARCIS (Netherlands)

    McFadden, P.L.; Skenderis, K.

    2010-01-01

    We present a holographic description of four-dimensional single-scalar inflationary universes in terms of a three-dimensional quantum field theory (QFT). The holographic description correctly reproduces standard inflationary predictions in their regime of applicability. In the opposite case, wherein

  2. Holographic Read-Only Memory

    Science.gov (United States)

    Mok, F.; Zhou, G.; Psaltis, D.

    The most successful use of optical memories so far has been as read-only memories (ROM). A main reason for this success has been the availability of inexpensive methods to mass-produce copies of recorded disks. This has made it possible to publish data (audio, video, databases, computer games) and distribute it widely through normal retail channels. In this chapter, we show results of a holographic read-only memory (HROM) of which digital data on a master disk can be copied onto replicate disks efficiently.

  3. Influence of Imperfections of Radiation and Technology on the Thermally Deformed State of Optical Elements

    Science.gov (United States)

    Shanin, Yu. I.; Shanin, O. I.; Chernykh, A. V.; Sharapov, I. S.

    2017-05-01

    The authors have performed calculation and an analysis of the thermally stressed state of optical elements (mirror, passage windows, and beam splitters). A study has been made of the temperature fields, stresses, bending thermal displacements, and expansions of the optical surface of these elements under inhomogeneous local conditions of their loading depending on the defects existing in them.

  4. Morphological Measurement of Living Cells in Methanol with Digital Holographic Microscopy

    Directory of Open Access Journals (Sweden)

    Yunxin Wang

    2013-01-01

    Full Text Available Cell morphology is the research foundation in many applications related to the estimation of cell status, drug response, and toxicity screening. In biomedical field, the quantitative phase detection is an inevitable trend for living cells. In this paper, the morphological change of HeLa cells treated with methanol of different concentrations is detected using digital holographic microscopy. The compact image-plane digital holographic system is designed based on fiber elements. The quantitative phase image of living cells is obtained in combination with numerical analysis. The statistical analysis shows that the area and average optical thickness of HeLa cells treated with 12.5% or 25% methanol reduce significantly, which indicates that the methanol with lower concentration could cause cellular shrinkage. The area of HeLa cells treated with 50% methanol is similar to that of normal cells (P>0.05, which reveals the fixative effect of methanol with higher concentration. The maximum optical thickness of the cells treated with 12.5%, 25%, and 50% methanol is greater than that of untreated cells, which implies the pyknosis of HeLa cells under the effect of methanol. All of the results demonstrate that digital holographic microscopy has supplied a noninvasive imaging alternative to measure the morphological change of label-free living cells.

  5. Lifshitz holographic superconductor in Hořava–Lifshitz gravity

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Cheng-Jian, E-mail: rocengeng@hotmail.com [Department of Physics, Nanchang University, Nanchang, 330031 (China); Center for Relativistic Astrophysics and High Energy Physics, Nanchang University, Nanchang 330031 (China); Kuang, Xiao-Mei, E-mail: xmeikuang@gmail.com [Instituto de Física, Pontificia Universidad Católica de Valparaíso, Casilla 4059, Valparaíso (Chile); Shu, Fu-Wen, E-mail: shufuwen@ncu.edu.cn [Department of Physics, Nanchang University, Nanchang, 330031 (China); Center for Relativistic Astrophysics and High Energy Physics, Nanchang University, Nanchang 330031 (China)

    2016-08-10

    We study the holographic phase transition of superconductor dual to a Lifshitz black brane probed by an anisotropic scalar field in the probe limit in Hořava–Lifshitz gravity. With the use of numerical and analytical method, we investigate how the critical temperature of the condensation is affected by the Lifshitz exponent z, α-correction term in the action as well as the dimensions of the gravity. We also numerically explore the condensation of the dual operator and optical conductivity of the holographic system. Various interesting properties of the holographic condensation affected by the parameters of model are discussed.

  6. Review of Random Phase Encoding in Volume Holographic Storage

    Directory of Open Access Journals (Sweden)

    Wei-Chia Su

    2012-09-01

    Full Text Available Random phase encoding is a unique technique for volume hologram which can be applied to various applications such as holographic multiplexing storage, image encryption, and optical sensing. In this review article, we first review and discuss diffraction selectivity of random phase encoding in volume holograms, which is the most important parameter related to multiplexing capacity of volume holographic storage. We then review an image encryption system based on random phase encoding. The alignment of phase key for decryption of the encoded image stored in holographic memory is analyzed and discussed. In the latter part of the review, an all-optical sensing system implemented by random phase encoding and holographic interconnection is presented.

  7. Holographic Dark Information Energy

    Directory of Open Access Journals (Sweden)

    Michael Paul Gough

    2011-04-01

    Full Text Available Landauer’s principle and the Holographic principle are used to derive the holographic information energy contribution to the Universe. Information energy density has increased with star formation until sufficient to start accelerating the expansion of the universe. The resulting reduction in the rate of star formation due to the accelerated expansion may provide a feedback that limits the information energy density to a constant level. The characteristics of the universe’s holographic information energy then closely match those required to explain dark energy and also answer the cosmic coincidence problem. Furthermore the era of acceleration will be clearly limited in time.

  8. Dynamical holographic QCD model

    Directory of Open Access Journals (Sweden)

    Li Danning

    2014-01-01

    Full Text Available We develop a dynamical holographic QCD model, which resembles the renormalization group from ultraviolet (UV to infrared (IR. The dynamical holographic model is constructed in the graviton-dilaton-scalar framework with the dilaton background field Φ and scalar field X responsible for the gluodynamics and chiral dynamics, respectively. We summarize the results on hadron spectra, QCD phase transition and transport properties including the jet quenching parameter and the shear/bulk viscosity in the framework of the dynamical holographic QCD model.

  9. Compact Fiber Optic Strain Sensors (cFOSS) Element

    Data.gov (United States)

    National Aeronautics and Space Administration — Armstrong researchers are reducing the Fiber Optic Sensing Sysme (FOSS) technology’s size, power requirement, weight, and cost to effectively extend...

  10. Design of an optical element forming an axial line segment for efficient LED lighting systems.

    Science.gov (United States)

    Aslanov, Emil R; Doskolovich, Leonid L; Moiseev, Mikhail A; Bezus, Evgeni A; Kazanskiy, Nikolay L

    2013-11-18

    An LED optical element is proposed as an alternative to cold-cathode fluorescent lamps. The optical element generates two symmetric uniformly illuminated line segments on the diffuse reflector. The illuminated segments then act as secondary linear light sources. The calculation of the optical element is reduced to the integration of the system of two explicit ordinary differential equations. The results of the simulation of an illumination system module consisting of a set of optical elements generating a set of line segments on the surface of the diffuse reflector are presented. The elements are located directly on the surface of the reflector. The simulation results demonstrate the uniform illumination of a rectangular area at a distance of 30-40 mm from the light source plane. The lighting efficiency of the designed system exceeds 83%.

  11. Spectral multiplexing using stacked volume-phase holographic gratings - I

    Science.gov (United States)

    Zanutta, A.; Landoni, M.; Riva, M.; Bianco, A.

    2017-08-01

    Many focal-reducer spectrographs, currently available at state-of-the-art telescopes facilities, would benefit from a simple refurbishing that could increase both the resolution and spectral range in order to cope with the progressively challenging scientific requirements, but, in order to make this update appealing, it should minimize the changes in the existing structure of the instrument. In the past, many authors proposed solutions based on stacking subsequently layers of dispersive elements and recording multiple spectra in one shot (multiplexing). Although this idea is promising, it brings several drawbacks and complexities that prevent the straightforward integration of such a device in a spectrograph. Fortunately, nowadays, the situation has changed dramatically, thanks to the successful experience achieved through photopolymeric holographic films, used to fabricate common volume-phase holographic gratings (VPHGs). Thanks to the various advantages made available by these materials in this context, we propose an innovative solution to design a stacked multiplexed VPHG that is able to secure efficiently different spectra in a single shot. This allows us to increase resolution and spectral range enabling astronomers to greatly economize their awarded time at the telescope. In this paper, we demonstrate the applicability of our solution, both in terms of expected performance and feasibility, supposing the upgrade of the Gran Telescopio CANARIAS (GTC) Optical System for Imaging and low-Intermediate-Resolution Integrated Spectroscopy (OSIRIS).

  12. Periodically driven holographic superconductor

    National Research Council Canada - National Science Library

    Li, Wei-Jia; Tian, Yu; Zhang, Hongbao

    2013-01-01

    .... As a result, our holographic superconductor is driven to the final oscillating state, where the condensate is suppressed and the oscillation frequency is controlled by twice of the driving frequency...

  13. Volume phase holographic gratings for astronomy based on solid photopolymers

    Science.gov (United States)

    Zanutta, Alessio; Bianco, Andrea; Insausti, Maider; Garzón, Francisco

    2014-07-01

    Volume Phase Holographic Gratings (VPHG) are gaining more and more interest as optical dispersing elements in new astronomical spectrographs at low and medium resolution. A key point is the development of new photosensitive materials suitable to produce VPHGs that match the stringent requirements of the astronomical environment. Here we report on the performances of VPHG based on Bayfol®HX solid photopolymer films developed by Bayer MaterialScience AG. Parameters affecting the grating efficiency (e. g. photopolymer film thickness and refractive index modulation) are measured and linked to the performances of VPHG working in the VIS-NIR region. Moreover, the behavior at low temperature and the aging properties of such materials/gratings are reported. Substantial efficiency gains on a new VPHG installed at the Asiago's spectrograph are shown and proven on the observation of a standard star (hr5501).

  14. Speckle noise suppression method in holographic display using time multiplexing

    Science.gov (United States)

    Liu, Su-Juan; Wang, Di; Li, Song-Jie; Wang, Qiong-Hua

    2017-06-01

    We propose a method to suppress the speckle noise in holographic display using time multiplexing. The diffractive optical elements (DOEs) and the subcomputer-generated holograms (sub-CGHs) are generated, respectively. The final image is reconstructed using time multiplexing of the subimages and the final subimages. Meanwhile, the speckle noise of the final image is suppressed by reducing the coherence of the reconstructed light and separating the adjacent image points in space. Compared with the pixel separation method, the experiments demonstrate that the proposed method suppresses the speckle noise effectively with less calculation burden and lower demand for frame rate of the spatial light modulator. In addition, with increases of the DOEs and the sub-CGHs, the speckle noise is further suppressed.

  15. Holographic reconstruction by compressive sensing

    Science.gov (United States)

    Leportier, T.; Park, M.-C.

    2017-06-01

    Techniques based on compressive sensing (CS) have been proposed recently for the optical capture of compressed holographic data. However, even though several remarkable articles have presented mathematical theories and numerical simulations, only a few experimental demonstrations have been reported. In this paper, we investigate the use of different metrics for the estimation of sparsity and show that the Gini index is the most consistent. In addition, we compare the sparsifying bases based on discrete cosine transform, Fourier transform and Fresnelets. We demonstrate that the Fresnelets basis is the best choice for the reconstruction of digital holograms by CS. Finally, we present an experimental set-up for optical acquisition of phase-shifted holograms with an imaging system based on a single-pixel sensor.

  16. Application of the light sword optical element in a case of presbyopia

    Science.gov (United States)

    Jaroszewicz, Zbigniew; Kolodziejczyk, Andrzej; Makowski, Michał; Mikuła, Grzegorz; Pawlak, Iwona; Petelczyc, Krzysztof; Suszek, Jarosław; Sypek, Maciej

    2006-04-01

    The paper presents abilities of the Light Sword Optical Element (LSOE) for imaging with extended depth of focus. The LSOE belongs to the class of optical elements focusing incident light into a segment of the optical axis. The elements of this kind can be used as correctors of some defects of human eye accommodation, especially in a case of presbyopia. The paper illustrates imaging properties of the LSOE. In particular, the point spread functions of the LSOE are analysed numerically. Imaging properties of the LSOE are compared with properties of optical elements being potentially useful for presbyopia correction as axicons, bifocal lens and trifocal lens. The experimental results illustrating usefulness of the LSOE in a case of presbyopia are given.

  17. Optimal design of SPP-based metallic nanoaperture optical elements by using Yang-Gu algorithm.

    Science.gov (United States)

    Zhu, Qiaofen; Ye, Jiasheng; Wang, Dayong; Gu, Benyuan; Zhang, Yan

    2011-05-09

    An optimization method for design of SPP-based metallic nanoaperture optical elements is presented. The design process is separated into two steps: Firstly, derive the amplitude and phase modulation of isolating single slit with different width; Secondly, realize the optimal design of element by using an iteration procedure. The Yang-Gu algorithm is expanded to perform this design. Three kinds of lenses which can achieve various functions have been designed by using this method. The rigorous electromagnetical theory is employed to justify and appraise the performances of the designed elements. It has been found that the designed elements can achieve the preset functions well. This method may provide a convenient avenue to optimally design metallic diffractive optical elements with subwavelength scale. © 2011 Optical Society of America

  18. Holographic Associative Memory Employing Phase Conjugation

    Science.gov (United States)

    Soffer, B. H.; Marom, E.; Owechko, Y.; Dunning, G.

    1986-12-01

    The principle of information retrieval by association has been suggested as a basis for parallel computing and as the process by which human memory functions.1 Various associative processors have been proposed that use electronic or optical means. Optical schemes,2-7 in particular, those based on holographic principles,8'8' are well suited to associative processing because of their high parallelism and information throughput. Previous workers8 demonstrated that holographically stored images can be recalled by using relatively complicated reference images but did not utilize nonlinear feedback to reduce the large cross talk that results when multiple objects are stored and a partial or distorted input is used for retrieval. These earlier approaches were limited in their ability to reconstruct the output object faithfully from a partial input.

  19. Multipoint photonic doppler velocimetry using optical lens elements

    Science.gov (United States)

    Frogget, Brent Copely; Romero, Vincent Todd

    2014-04-29

    A probe including a fisheye lens is disclosed to measure the velocity distribution of a moving surface along many lines of sight. Laser light, directed to the surface and then reflected back from the surface, is Doppler shifted by the moving surface, collected into fisheye lens, and then directed to detection equipment through optic fibers. The received light is mixed with reference laser light and using photonic Doppler velocimetry, a continuous time record of the surface movement is obtained. An array of single-mode optical fibers provides an optic signal to an index-matching lens and eventually to a fisheye lens. The fiber array flat polished and coupled to the index-matching lens using index-matching gel. Numerous fibers in a fiber array project numerous rays through the fisheye lens which in turn project many measurement points at numerous different locations to establish surface coverage over a hemispherical shape with very little crosstalk.

  20. Complex wavefront modulation and holographic display using single spatial light modulator

    Science.gov (United States)

    Kong, Dezhao; Cao, Liangcai; Shen, Xueju; Zhang, Hao; Zong, Song; Jin, Guofan

    2017-08-01

    A holographic display method based on complex wavefront modulation using single spatial light modulator is proposed. The holographic display is achieved from complex wavefront encoded by double phase hologram. The modulated beam by single phase-only spatial light modulator passes through a 4f optical system to synthesize the expected complex modulated wavefront on the output plane, with a low-pass filter in the Fourier plane. The performance of holographic display is also improved by complex wavefront modulation, compared with the holographic display based on phase-only wavefront modulation. The proposed encoding and display technique is theoretically demonstrated, as well as validated in numerical simulations.

  1. Holographic window for solar power generation

    Science.gov (United States)

    Kasezawa, Toshihiro; Horimai, Hideyoshi; Tabuchi, Hiroshi; Shimura, Tsutomu

    2016-12-01

    A new photovoltaic generation unit based on the application of holographic technologies called a Holo-Window is proposed in this work. The basic principle and the optical configuration used for the basic experimental unit are described. Suitable fabrication technology for a hologram with the broadband spectrum required to provide the appropriate sunlight capture capability is then discussed. Finally, a laboratory-prototype Holo-Window unit was developed and its performance was evaluated.

  2. Holographic Spherically Symmetric Metrics

    Science.gov (United States)

    Petri, Michael

    The holographic principle (HP) conjectures, that the maximum number of degrees of freedom of any realistic physical system is proportional to the system's boundary area. The HP has its roots in the study of black holes. It has recently been applied to cosmological solutions. In this article we apply the HP to spherically symmetric static space-times. We find that any regular spherically symmetric object saturating the HP is subject to tight constraints on the (interior) metric, energy-density, temperature and entropy-density. Whenever gravity can be described by a metric theory, gravity is macroscopically scale invariant and the laws of thermodynamics hold locally and globally, the (interior) metric of a regular holographic object is uniquely determined up to a constant factor and the interior matter-state must follow well defined scaling relations. When the metric theory of gravity is general relativity, the interior matter has an overall string equation of state (EOS) and a unique total energy-density. Thus the holographic metric derived in this article can serve as simple interior 4D realization of Mathur's string fuzzball proposal. Some properties of the holographic metric and its possible experimental verification are discussed. The geodesics of the holographic metric describe an isotropically expanding (or contracting) universe with a nearly homogeneous matter-distribution within the local Hubble volume. Due to the overall string EOS the active gravitational mass-density is zero, resulting in a coasting expansion with Ht = 1, which is compatible with the recent GRB-data.

  3. Holographic display system for restoration of sight to the blind

    Science.gov (United States)

    Goetz, G. A.; Mandel, Y.; Manivanh, R.; Palanker, D. V.; Čižmár, T.

    2013-10-01

    Objective. We present a holographic near-the-eye display system enabling optical approaches for sight restoration to the blind, such as photovoltaic retinal prosthesis, optogenetic and other photoactivation techniques. We compare it with conventional liquid crystal displays (LCD) or digital light processing (DLP)-based displays in terms of image quality, field of view, optical efficiency and safety. Approach. We detail the optical configuration of the holographic display system and its characterization using a phase-only spatial light modulator. Main results. We describe approaches to controlling the zero diffraction order and speckle related issues in holographic display systems and assess the image quality of such systems. We show that holographic techniques offer significant advantages in terms of peak irradiance and power efficiency, and enable designs that are inherently safer than LCD or DLP-based systems. We demonstrate the performance of our holographic display system in the assessment of cortical response to alternating gratings projected onto the retinas of rats. Significance. We address the issues associated with the design of high brightness, near-the-eye display systems and propose solutions to the efficiency and safety challenges with an optical design which could be miniaturized and mounted onto goggles.

  4. Holographic display system for restoration of sight to the blind.

    Science.gov (United States)

    Goetz, G A; Mandel, Y; Manivanh, R; Palanker, D V; Čižmár, T

    2013-10-01

    We present a holographic near-the-eye display system enabling optical approaches for sight restoration to the blind, such as photovoltaic retinal prosthesis, optogenetic and other photoactivation techniques. We compare it with conventional liquid crystal displays (LCD) or digital light processing (DLP)-based displays in terms of image quality, field of view, optical efficiency and safety. We detail the optical configuration of the holographic display system and its characterization using a phase-only spatial light modulator. We describe approaches to controlling the zero diffraction order and speckle related issues in holographic display systems and assess the image quality of such systems. We show that holographic techniques offer significant advantages in terms of peak irradiance and power efficiency, and enable designs that are inherently safer than LCD or DLP-based systems. We demonstrate the performance of our holographic display system in the assessment of cortical response to alternating gratings projected onto the retinas of rats. We address the issues associated with the design of high brightness, near-the-eye display systems and propose solutions to the efficiency and safety challenges with an optical design which could be miniaturized and mounted onto goggles.

  5. Design of diffractive optical elements for the fractional Fourier transform domain: phase-space approach.

    Science.gov (United States)

    Testorf, Markus

    2006-01-01

    Phase-space optics is used to relate the problem of designing diffractive optical elements for any first-order optical system to the corresponding design problem in the Fraunhofer diffraction regime. This, in particular, provides a novel approach for the fractional Fourier transform domain. For fractional Fourier transforms of arbitrary order, the diffractive element is determined as the optimum design computed for a generic Fourier transform system, scaled and modulated with a parabolic lens function. The phase-space description also identifies critical system parameters that limit the performance and applicability of this method. Numerical simulations of paraxial wave propagation are used to validate the method.

  6. Performance assessment of geotechnical structural elements using distributed fiber optic sensing

    Science.gov (United States)

    Monsberger, Christoph; Woschitz, Helmut; Lienhart, Werner; Račanský, Václav; Hayden, Martin

    2017-04-01

    Geotechnical structural elements are used to underpin heavy structures or to stabilize slopes and embankments. The bearing capacity of these components is usually verified by geotechnical load tests. It is state of the art to measure the resulting deformations with electronic sensors at the surface and therefore, the load distribution along the objects cannot be determined. This paper reports about distributed strain measurements with an optical backscatter reflectometer along geotechnical elements. In addition to the installation of the optical fiber in harsh field conditions, results of investigations of the fiber optic system in the laboratory and the most significant results of the field trials are presented.

  7. The holographic universe

    CERN Document Server

    Talbot, Michael

    1991-01-01

    'There is evidence to suggest that our world and everything in it - from snowflakes to maple trees to falling stars and spinning electrons - are only ghostly images, projections from a level of reality literally beyond both space and time.' This is the astonishing idea behind the holographic theory of the universe, pioneered by two eminent thinkers: physicist David Bohm, a former protege of Albert Einstein, and quantum physicist Karl Pribram. The holographic theory of the universe encompasses consciousness and reality as we know them, but can also explain such hitherto unexplained phenomena as telepathy, out-of-body experiences and even miraculous healing. In this remarkable book, Michael Talbot reveals the extraordinary depth and power of the holographic theory of the universe, illustrating how it makes sense of the entire range of experiences within our universe - and in other universes beyond our own.

  8. Phenomenology of Holographic Quenches

    Science.gov (United States)

    da Silva, Emilia; Lopez, Esperanza; Mas, Javier; Serantes, Alexandre

    2015-10-01

    We study holographic models related to global quantum quenches in finite size systems. The holographic set up describes naturally a CFT, which we consider on a circle and a sphere. The enhanced symmetry of the conformal group on the circle motivates us to compare the evolution in both cases. Depending on the initial conditions, the dual geometry exhibits oscillations that we holographically interpret as revivals of the initial field theory state. On the sphere, this only happens when the energy density created by the quench is small compared to the system size. However on the circle considerably larger energy densities are compatible with revivals. Two different timescales emerge in this latter case. A collapse time, when the system appears to have dephased, and the revival time, when after rephasing the initial state is partially recovered. The ratio of these two times depends upon the initial conditions in a similar way to what is observed in some experimental setups exhibiting collapse and revivals.

  9. Infrared optical element mounting techniques for wide temperature ranges.

    Science.gov (United States)

    Saggin, Bortolino; Tarabini, Marco; Scaccabarozzi, Diego

    2010-01-20

    We describe the optimization of a mounting system for the infrared (IR) optics of a spaceborne interferometer working in the temperature range between -120 degrees C and +150 degrees C. The concept is based on an aluminum alloy frame with designed mechanical compliance, which allows for compensation of the different coefficient of thermal expansion between the optics and the holder; at the same time, the system provides for the high stiffness required to reach natural frequencies above 200 Hz, which are mandatory in most space missions. Thermal adapters with properly chosen thermomechanical characteristics are interposed between the metallic structure and the lens, so as to reduce the interface stresses on the mechanically weak IR material, due to both the thermoelastic and acceleration loads. With the proposed mount, the competitive requirements of stiffness and stress-free mounting can be matched in wide temperature ranges. The case study of the interferometer of a miniaturized Fourier transform IR spectrometer is presented.

  10. Mueller imaging polarimetry of holographic polarization gratings inscribed in azopolymer films.

    Science.gov (United States)

    Martinez-Ponce, Geminiano

    2016-09-19

    Three types of polarization gratings have been recorded in azopolymer films by the symmetrical superposition of different orthogonal pairs of polarized beams. The inscribed holographic elements have been analyzed microscopically in a Mueller polarimeter in order to image the optical anisotropies photoinduced in the film. In the most of cases, the spatial modulation of diattenuation, birefringence, and optical rotation reproduced quite well previous results reported in the literature. Nevertheless, in the particular case of coherent superposition of p- and s-polarized beams, the spatial frequency for optical rotation (related to the Stokes parameter V) was different from the one observed in linear anisotropy (related to the Stokes parameter U). It is shown by theory and experiment that, in the polarized field used to record this polarization grating, the fourth-Stokes parameter changes sign, which implies a change in circular polarization handedness, practically once between two adjacent maxima.

  11. Reducing aberration effect of Fourier transform lens by modifying Fourier spectrum of diffractive optical element in beam shaping optical system.

    Science.gov (United States)

    Zhang, Fang; Zhu, Jing; Song, Qiang; Yue, Weirui; Liu, Jingdan; Wang, Jian; Situ, Guohai; Huang, Huijie

    2015-10-20

    In general, Fourier transform lenses are considered as ideal in the design algorithms of diffractive optical elements (DOEs). However, the inherent aberrations of a real Fourier transform lens disturb the far field pattern. The difference between the generated pattern and the expected design will impact the system performance. Therefore, a method for modifying the Fourier spectrum of DOEs without introducing other optical elements to reduce the aberration effect of the Fourier transform lens is proposed. By applying this method, beam shaping performance is improved markedly for the optical system with a real Fourier transform lens. The experiments carried out with a commercial Fourier transform lens give evidence for this method. The method is capable of reducing the system complexity as well as improving its performance.

  12. Tunable Diffractive Optical Elements Based on Shape-Memory Polymers Fabricated via Hot Embossing.

    Science.gov (United States)

    Schauer, Senta; Meier, Tobias; Reinhard, Maximilian; Röhrig, Michael; Schneider, Marc; Heilig, Markus; Kolew, Alexander; Worgull, Matthias; Hölscher, Hendrik

    2016-04-13

    We introduce actively tunable diffractive optical elements fabricated from shape-memory polymers (SMPs). By utilizing the shape-memory effect of the polymer, at least one crucial attribute of the diffractive optical element (DOE) is tunable and adjustable subsequent to the completed fabrication process. A thermoplastic, transparent, thermoresponsive polyurethane SMP was structured with diverse diffractive microstructures via hot embossing. The tunability was enabled by programming a second, temporary shape into the diffractive optical element by mechanical deformation, either by stretching or a second embossing cycle at low temperatures. Upon exposure to the stimulus heat, the structures change continuously and controllable in a predefined way. We establish the novel concept of shape-memory diffractive optical elements by illustrating their capabilities, with regard to tunability, by displaying the morphing diffractive pattern of a height tunable and a period tunable structure, respectively. A sample where an arbitrary structure is transformed to a second, disparate one is illustrated as well. To prove the applicability of our tunable shape-memory diffractive optical elements, we verified their long-term stability and demonstrated the precise adjustability with a detailed analysis of the recovery dynamics, in terms of temperature dependence and spatially resolved, time-dependent recovery.

  13. Micromilled optical elements for edge-lit illumination panels

    Science.gov (United States)

    Ronny, Rahima Afrose; Knopf, George K.; Bordatchev, Evgueni; Nikumb, Suwas

    2013-04-01

    Edge-lit light guide panels (LGPs) with micropatterned surfaces represent a new technology for developing small- and medium-sized illumination sources for application such as automotive, residential lighting, and advertising displays. The shape, density, and spatial distribution of the micro-optical structures (MOSs) imprinted on the transparent LGP must be selected to achieve high brightness and uniform luminance over the active surface. We examine how round-tip cylindrical MOSs fabricated by precision micromilling can be used to create patterned surfaces on low-cost transparent polymethyl-methacrylate substrates for high-intensity illumination applications. The impact of varying the number, pitch, spatial distribution, and depth of the optical microstructures on lighting performance is initially investigated using LightTools™ simulation software. To illustrate the microfabrication process, several 100×100×6 mm3 LGP prototypes are constructed and tested. The prototypes include an "optimized" array of MOSs that exhibit near-uniform illumination (approximately 89%) across its active light-emitting surface. Although the average illumination was 7.3% less than the value predicted from numerical simulation, it demonstrates how LGPs can be created using micromilling operations. Customized MOS arrays with a bright rectangular pattern near the center of the panel and a sequence of MOSs that illuminate a predefined logo are also presented.

  14. Holographic analysis of photopolymers

    Science.gov (United States)

    Sullivan, Amy C.; Alim, Marvin D.; Glugla, David J.; McLeod, Robert R.

    2017-05-01

    Two-beam holographic exposure and subsequent monitoring of the time-dependent first-order Bragg diffraction is a common method for investigating the refractive index response of holographic photopolymers for a range of input writing conditions. The experimental set up is straightforward, and Kogelnik's well-known coupled wave theory (CWT)[1] can be used to separate measurements of the change in index of refraction (Δn) and the thickness of transmission and reflection holograms. However, CWT assumes that the hologram is written and read out with a plane wave and that the hologram is uniform in both the transverse and depth dimensions, assumptions that are rarely valid in practical holographic testing. The effect of deviations from these assumptions on the measured thickness and Δn become more pronounced for over-modulated exposures. As commercial and research polymers reach refractive index modulations on the order of 10-2, even relatively thin (material analysis must be carefully evaluated in this regime. We present a study of the effects of the finite Gaussian write and read beams on the CWT analysis of photopolymer materials and discuss what intuition this can give us about the effect other non-uniformities, such as mechanical stresses and significant absorption of the write beam, will have on the analysis of the maximum attainable refractive index in a material system. We use this analysis to study a model high Δn two-stage photopolymer holographic material using both transmission and reflection holograms.

  15. Combining freeform-shaped holographic grating and curved detectors in a scheme of multi-slit astronomic spectrograph

    Science.gov (United States)

    Muslimov, Eduard R.; Hugot, Emmanuel; Ferrari, Marc

    2017-05-01

    In the present work we consider optical design of a multi-slit astronomic spectrograph for UV domain with freeform reflective elements. The scheme consists of only two reflective elements - a holographic grating imposed on freeform surface and a freeform mirror. The freeforms are described by standard Zernike polynomials and the hologram is recorded by two coherent point sources. We demonstrate that in such a scheme it's possible to obtain quite high optical quality for an extended field of view and relatively high dispersion on a curved image surface. The spectrograph works with linear field of view of 76x32 mm and provides reciprocal linear dispersion equal to 0.5 nm/mm and typical resolving power of 15 000 over the UV range of 100-200 nm. Feasibility of the optical components is discussed and coupling of the spectrograph with a TMA telescope is demonstrated.

  16. Spiral holographic imaging through quantum interference

    Science.gov (United States)

    Tang, Jie; Ming, Yang; Hu, Wei; Lu, Yan-qing

    2017-07-01

    Spiral holographic imaging in the Hong-Ou-Mandel interference scheme is introduced. Using spontaneous parametric down-conversion as a source of photon pairs, we analyze the joint orbital angular momentum spectrum of a reference photon and the photon encoding information of the object. The first-order interference of light beams in standard holographic imaging is replaced by the quantum interference of two-photon probability amplitudes. The difficulty in retrieving the amplitude and phase structure of an unknown photon is thereby avoided as classical interferometric techniques such as optical holography do not apply. Our results show that the full information of the object's transmission function can be recorded in the spiral hologram, which originates directly from the joint orbital angular momentum spectrum. This presents a lateral demonstration of compressive imaging and can potentially be used for remote sensing.

  17. A high-accuracy optical linear algebra processor for finite element applications

    Science.gov (United States)

    Casasent, D.; Taylor, B. K.

    1984-01-01

    Optical linear processors are computationally efficient computers for solving matrix-matrix and matrix-vector oriented problems. Optical system errors limit their dynamic range to 30-40 dB, which limits their accuray to 9-12 bits. Large problems, such as the finite element problem in structural mechanics (with tens or hundreds of thousands of variables) which can exploit the speed of optical processors, require the 32 bit accuracy obtainable from digital machines. To obtain this required 32 bit accuracy with an optical processor, the data can be digitally encoded, thereby reducing the dynamic range requirements of the optical system (i.e., decreasing the effect of optical errors on the data) while providing increased accuracy. This report describes a new digitally encoded optical linear algebra processor architecture for solving finite element and banded matrix-vector problems. A linear static plate bending case study is described which quantities the processor requirements. Multiplication by digital convolution is explained, and the digitally encoded optical processor architecture is advanced.

  18. Finite element modeling of acousto-optic effect and optimization of the figure of merit

    Science.gov (United States)

    McIntosh, Robert; Bhalla, Amar S.; Guo, Ruyan

    2012-10-01

    A study of the acousto-optic (AO) effect in a family of oxide crystals (including e.g., TiO2, ZnO, LiNbO3, and ferroelectric perovskites) as well as semiconductors has been conducted by finite element analysis method. In addition, the acousto-optic figure of merit (FOM) as a function of material's refractive index, density, effective AO coefficient and the velocity of the acoustic wave in the material, is also investigated. By examining the directional dependent velocity, acousto-optic coefficients, and refractive index, the acousto-optic FOM can be calculated and plotted in all directions revealing the optimal crystal orientation to maximize coupling between the optical and acoustic waves. A finite element model was developed to corroborate the predicted interaction. The model examines the diffraction that occurs by the optical wave as it travels through an acousto-optic medium. The combined information gained from Mathematica and COMSOL Multiphysics-based modeling is shown to be an effective means of predicating acousto-optic device functionality.

  19. Exploring neural cell dynamics with digital holographic microscopy

    KAUST Repository

    Marquet, Pierre

    2013-07-11

    In this review, we summarize how the new concept of digital optics applied to the field of holographic microscopy has allowed the development of a reliable and flexible digital holographic quantitative phase microscopy (DH-QPM) technique at the nanoscale particularly suitable for cell imaging. Particular emphasis is placed on the original biological ormation provided by the quantitative phase signal. We present the most relevant DH-QPM applications in the field of cell biology, including automated cell counts, recognition, classification, three-dimensional tracking, discrimination between physiological and pathophysiological states, and the study of cell membrane fluctuations at the nanoscale. In the last part, original results show how DH-QPM can address two important issues in the field of neurobiology, namely, multiple-site optical recording of neuronal activity and noninvasive visualization of dendritic spine dynamics resulting from a full digital holographic microscopy tomographic approach. Copyright © 2013 by Annual Reviews.

  20. Development of adaptive optics elements for solar telescope

    Science.gov (United States)

    Lukin, V. P.; Grigor'ev, V. M.; Antoshkin, L. V.; Botugina, N. N.; Kovadlo, P. G.; Konyaev, P. A.; Kopulov, E. A.; Skomorovsky, V. I.; Trifonov, V. D.; Chuprakov, S. A.

    2012-07-01

    The devices and components of adaptive optical system ANGARA, which is developed for image correction in the Big solar vacuum telescope (BSVT) at Baykal astrophysical observatory are described. It is shown that the use of modernized adaptive system on BSVT not only reduces the turbulent atmospheric distortions of image, but also gives a possibility to improve the telescope developing new methods of solar observations. A high precision Shack-Hartmann wavefront (WF) sensor has been developed on the basis of a low-aperture off-axis diffraction lens array. The device is capable of measuring WF slopes at array sub-apertures of size 640X640 μm with an error not exceeding 4.80 arc.sec. Also the modification of this sensor for adaptive system of solar telescope using extended scenes as tracking objects, such as sunspot, pores, solar granulation and limb, is presented. The software package developed for the proposed WF sensors includes three algorithms of local WF slopes estimation (modified centroids, normalized cross-correlation and fast Fourier-demodulation), as well as three methods of WF reconstruction (modal Zernike polynomials expansion, deformable mirror response functions expansion and phase unwrapping), that can be selected during operation with accordance to the application.

  1. Challenges in mold manufacturing for high precision molded diffractive optical elements

    Science.gov (United States)

    Pongs, Guido; Bresseler, Bernd; Schweizer, Klaus; Bergs, Thomas

    2016-09-01

    Isothermal precision glass molding of imaging optics is the key technology for mass production of precise optical elements. Especially for numerous consumer applications (e.g. digital cameras, smart phones, …), high precision glass molding is applied for the manufacturing of aspherical lenses. The usage of diffractive optical elements (DOEs) can help to further reduce the number of lenses in the optical systems which will lead to a reduced weight of hand-held optical devices. But today the application of molded glass DOEs is limited due to the technological challenges in structuring the mold surfaces. Depending on the application submicrometer structures are required on the mold surface. Furthermore these structures have to be replicated very precisely to the glass lens surface. Especially the micro structuring of hard and brittle mold materials such as Tungsten Carbide is very difficult and not established. Thus a multitude of innovative approaches using diffractive optical elements cannot be realized. Aixtooling has investigated in different mold materials and different suitable machining technologies for the micro- and sub-micrometer structuring of mold surfaces. The focus of the work lays on ultra-precision grinding to generate the diffractive pattern on the mold surfaces. This paper presents the latest achievements in diffractive structuring of Tungsten Carbide mold surfaces by ultra-precision grinding.

  2. Digital holographic microscopy as multimodal read out for in vitro nanomaterial cytotoxicity testing

    Science.gov (United States)

    Mues, Sarah; Ketelhut, Steffi; Kemper, Björn; Schnekenburger, Jürgen

    2017-07-01

    Digital holographic microscopy (DHM) was used as multimodal optical method for nanomaterial toxicity testing that overcomes the limitations and assay disturbances of conventional in vitro assays based on absorbance or fluorescence read outs.

  3. Intelligent holographic databases

    Science.gov (United States)

    Barbastathis, George

    Memory is a key component of intelligence. In the human brain, physical structure and functionality jointly provide diverse memory modalities at multiple time scales. How could we engineer artificial memories with similar faculties? In this thesis, we attack both hardware and algorithmic aspects of this problem. A good part is devoted to holographic memory architectures, because they meet high capacity and parallelism requirements. We develop and fully characterize shift multiplexing, a novel storage method that simplifies disk head design for holographic disks. We develop and optimize the design of compact refreshable holographic random access memories, showing several ways that 1 Tbit can be stored holographically in volume less than 1 m3, with surface density more than 20 times higher than conventional silicon DRAM integrated circuits. To address the issue of photorefractive volatility, we further develop the two-lambda (dual wavelength) method for shift multiplexing, and combine electrical fixing with angle multiplexing to demonstrate 1,000 multiplexed fixed holograms. Finally, we propose a noise model and an information theoretic metric to optimize the imaging system of a holographic memory, in terms of storage density and error rate. Motivated by the problem of interfacing sensors and memories to a complex system with limited computational resources, we construct a computer game of Desert Survival, built as a high-dimensional non-stationary virtual environment in a competitive setting. The efficacy of episodic learning, implemented as a reinforced Nearest Neighbor scheme, and the probability of winning against a control opponent improve significantly by concentrating the algorithmic effort to the virtual desert neighborhood that emerges as most significant at any time. The generalized computational model combines the autonomous neural network and von Neumann paradigms through a compact, dynamic central representation, which contains the most salient features

  4. Optoelectronic correlation processors with photorefractive crystals for the storage elements

    Directory of Open Access Journals (Sweden)

    Lipinskii A. Y.

    2011-12-01

    Full Text Available The paper presents review of optical and acousto-optic correlation processors that contain photorefractive crystals. Optical correlators are the efficient devices for the image recognition due to the parallel way high operation rate processing of significant data amount. The shift-invariant holographic joint-transform correlators, dynamic holographic correlator, acousto-optic correlation processors with memory were considered.

  5. Optical Simulation and Experimental Verification of a Fresnel Solar Concentrator with a New Hybrid Second Optical Element

    Directory of Open Access Journals (Sweden)

    Guiqiang Li

    2016-01-01

    Full Text Available Fresnel solar concentrator is one of the most common solar concentrators in solar applications. For high Fresnel concentrating PV or PV/T systems, the second optical element (SOE is the key component for the high optical efficiency at a wider deflection angle, which is important for overcoming unavoidable errors from the tacking system, the Fresnel lens processing and installment technology, and so forth. In this paper, a new hybrid SOE was designed to match the Fresnel solar concentrator with the concentration ratio of 1090x. The ray-tracing technology was employed to indicate the optical properties. The simulation outcome showed that the Fresnel solar concentrator with the new hybrid SOE has a wider deflection angle scope with the high optical efficiency. Furthermore, the flux distribution with different deviation angles was also analyzed. In addition, the experiment of the Fresnel solar concentrator with the hybrid SOE under outdoor condition was carried out. The verifications from the electrical and thermal outputs were all made to analyze the optical efficiency comprehensively. The optical efficiency resulting from the experiment is found to be consistent with that from the simulation.

  6. Dual wavelength full field imaging in low coherence digital holographic microscopy.

    Science.gov (United States)

    Monemhaghdoust, Zahra; Montfort, Frédéric; Emery, Yves; Depeursinge, Christian; Moser, Christophe

    2011-11-21

    A diffractive optical element (DOE) is presented to simultaneously manipulate the coherence plane tilt of a beam containing a plurality of discrete wavelengths. The DOE is inserted into the reference arm of an off-axis dual wavelength low coherence digital holographic microscope (DHM) to provide a coherence plane tilt so that interference with the object beam generates fringes over the full detector area. The DOE maintains the propagation direction of the reference beam and thus it can be inserted in-line in existing DHM set-ups. We demonstrate full field imaging in a reflection commercial DHM with two wavelengths, 685 nm and 794 nm, resulting in an unambiguous range of 2.494 micrometers. © 2011 Optical Society of America

  7. Properties of diffraction gratings holographically recorded in poly(ethylene glycol)dimethacrylate-ionic liquid composites

    Science.gov (United States)

    Ellabban, Mostafa A.; Glavan, Gašper; Flauger, Peter; Klepp, Jürgen; Fally, Martin

    2017-05-01

    We investigated recording and readout of transmission gratings in composites of poly(ethylene glycol) dimethacrylate (PEGDMA) and ionic liquids (IL) in detail. Gratings were recorded using a two-wave mixing technique for different grating periods, exposures and a series of film thicknesses. The recording kinetics as well as the post-exposure behavior of the gratings were studied by diffraction experiments. We found that - depending on the parameters - different grating types (pure phase or mixed) are generated, and at elevated thicknesses strong light-induced scattering develops. Gratings with thicknesses up to 85 micrometers are of the required quality with excellent optical properties, thicker gratings exhibit strong detrimental light-induced scattering. The obtained results are particularly valuable when considering PEGDMA-ionic liquid composites for applications as e.g., holographic storage materials or as neutron optic diffractive elements.

  8. Ring-laser optical flip-flop memory with single active element

    NARCIS (Netherlands)

    Zhang, S.; Liu, Y.S.; Lenstra, D.; Hill, M. T.; Ju, H. K.; Khoe, G.D.; Dorren, H.J.S.

    2004-01-01

    We present a novel optical flip-flop configuration that consists of two unidirectional ring lasers with separate cavities but sharing the same active element unidirectionally. We show that in such a configuration light in the lasing cavity can suppress lasing in the other cavity so that this system

  9. Multilevel micro-structuring of glassy carbon for precision glass molding of diffractive optical elements

    Science.gov (United States)

    Prater, Karin; Dukwen, Julia; Scharf, Toralf; Herzig, Hans Peter; Plöger, Sven; Hermerschmidt, Andreas

    2015-03-01

    A consumer market for diffractive optical elements in glass can only be created if high efficient elements are available at affordable prices. In diffractive optics the efficiency and optical properties increases with the number of levels used, but in the same way the costs are multiplied by the number if fabrication steps. Replication of multilevel diffractive optical elements in glass would allow cost efficient fabrication but a suitable mold material is needed. Glassy carbon shows a high mechanical strength, thermal stability and non-sticking adhesion properties, which makes it an excellent candidate as mold material for precision compression molding of low and high glass-transition temperature materials. We introduce an 8 level micro structuring process for glassy carbon molds with standard photolithography and a Ti layer as hard mask for reactive ion etching. The molds were applied to thermal imprinting onto low and high transition temperature glass. Optical performance was tested for the molded samples with different designs for laser beamsplitters. The results show a good agreement to the design specification. Our result allow us to show limitations of our fabrication technique and we discussed the suitability of precision glass molding for cost efficient mass production with a high quality.

  10. Energy analysis of holographic lenses for solar concentration

    Science.gov (United States)

    Marín-Sáez, Julia; Collados, M. Victoria; Chemisana, Daniel; Atencia, Jesús

    2017-05-01

    The use of volume and phase holographic elements in the design of photovoltaic solar concentrators has become very popular as an alternative solution to refractive systems, due to their high efficiency, low cost and possibilities of building integration. Angular and chromatic selectivity of volume holograms can affect their behavior as solar concentrators. In holographic lenses, angular and chromatic selectivity varies along the lens plane. Besides, considering that the holographic materials are not sensitive to the wavelengths for which the solar cells are most efficient, the reconstruction wavelength is usually different from the recording one. As a consequence, not all points of the lens work at Bragg condition for a defined incident direction or wavelength. A software tool that calculates the direction and efficiency of solar rays at the output of a volume holographic element has been developed in this study. It allows the analysis of the total energy that reaches the solar cell, taking into account the sun movement, the solar spectrum and the sensitivity of the solar cell. The dependence of the recording wavelength on the collected energy is studied with this software. As the recording angle is different along a holographic lens, some zones of the lens could not act as a volume hologram. The efficiency at the transition zones between volume and thin behavior in lenses recorded in Bayfol HX is experimentally analyzed in order to decide if the energy of generated higher diffraction orders has to be included in the simulation.

  11. Luminous exothermic hollow optical elements for enhancement of biofilm growth and activity.

    Science.gov (United States)

    Zhong, Nianbing; Zhao, Mingfu; Zhong, Lianchao; Li, Shan; Luo, Binbin; Tang, Bin; Song, Tao; Shi, Shenghui; Hu, Xinyu; Xin, Xin; Wu, Ruohua; Cen, Yanyan; Wang, Zhengkun

    2017-03-20

    In this work, we present a luminous-exothermic hollow optical element (LEHOE) that performs spectral beam splitting in the visible spectral range for the enhancement of biofilm growth and activity. The LEHOE is composed of a four-layer structure with a fiber core (air), cladding (SiO2), coating I (LaB6 film), and coating II (SiO2-Agarose-Medium film). To clarify the physical, optical and photothermal conversion properties of the LEHOE, we determined the surface morphology and composition of the coating materials, and examined the luminous intensity and heating rate at the LEHOE surface. The biofilm activity on the biocompatible LEHOE is far greater than that of commercial fibers, and the biofilm weight on the LEHOE is 4.5 × that of the uncoated hollow optical element.

  12. Fiber optic refractometric sensors using a semi-ellipsoidal sensing element.

    Science.gov (United States)

    Castro Martinez, Amalia Nallely; Komanec, Matej; Nemecek, Tomas; Zvanovec, Stanislav; Khotiaintsev, Sergei

    2016-04-01

    We present theoretical and experimental results for a fiber optic refractometric sensor employing a semi-ellipsoidal sensing element made of polymethyl methacrylate. The double internal reflection of light inside the element provides sensitivity to the refractive index of the external analyte. We demonstrate that the developed sensor, operating at a wavelength of 632 nm, is capable of measurement within a wide range of refractive indices from n=1.00 to n=1.47 with sensitivity over 500 dB/RIU. A comparison of the developed sensor with two more complex refractometric sensors, one based on tapered optical fiber and the other based on suspended-core microstructure optical fiber, is presented.

  13. Tunable photonic elements at the surface of an optical fiber with piezoelectric core

    CERN Document Server

    Dmitriev, Artemiy V

    2016-01-01

    Tunable photonic elements at the surface of an optical fiber with piezoelectric core are proposed and analyzed theoretically. These elements are based on whispering gallery modes whose propagation along the fiber is fully controlled by nanoscale variation of the effective fiber radius, which can be tuned by means of a piezoelectric actuator embedded into the core. The developed theory allows one to express the introduced effective radius variation through the shape of the actuator and the voltage applied to it. In particular, the design of a miniature tunable optical delay line and a miniature tunable dispersion compensator is presented. The potential application of the suggested model to the design of a miniature optical buffer is discussed.

  14. A Position, Scale, and Rotation Invariant Holographic Associative Memory

    Science.gov (United States)

    1988-12-01

    printed on the Imagen Laser printer. An example is seen in Figure 20. A photographic negative of this laser plot was obtained from the Base Photo Lab...22. White, H. J. et al. " Digital and Analogue Holographic Associative Memories," Optics Letters, 11: 30-37 (January 1988). 23. Walrond, Capt Thomas

  15. Holographic entanglement entropy

    CERN Document Server

    Rangamani, Mukund

    2017-01-01

    This book provides a comprehensive overview of developments in the field of holographic entanglement entropy. Within the context of the AdS/CFT correspondence, it is shown how quantum entanglement is computed by the area of certain extremal surfaces. The general lessons one can learn from this connection are drawn out for quantum field theories, many-body physics, and quantum gravity. An overview of the necessary background material is provided together with a flavor of the exciting open questions that are currently being discussed. The book is divided into four main parts. In the first part, the concept of entanglement, and methods for computing it, in quantum field theories is reviewed. In the second part, an overview of the AdS/CFT correspondence is given and the holographic entanglement entropy prescription is explained. In the third part, the time-dependence of entanglement entropy in out-of-equilibrium systems, and applications to many body physics are explored using holographic methods. The last part f...

  16. Contrast transfer characteristics of the light sword optical element designed for presbyopia compensation

    Science.gov (United States)

    Petelczyc, K.; Bará, S.; Ciro López, A.; Jaroszewicz, Z.; Kakarenko, K.; Kolodziejczyk, A.; Sypek, M.

    2011-11-01

    The paper discusses the abilities of the light sword optical element (LSOE) for presbyopia compensation. The imaging properties are analyzed by means of the modulation transfer functions and output images of the star resolution test. All numerical calculations are performed assuming an optical set-up simulating the presbyopic human eye and based on the Gullstrand model. In order to have a meaningful comparison we expand our study and present adequate analysis for other elements potentially useful in ophthalmology as reading glasses, bifocal lenses and axicons. According to the obtained results the LSOE can successfully realize vision with an extended depth of field. The element makes possible the compensation of an assumed defocus up to 4 dioptres. The output images formed by the LSOE are well recognizable and have acceptable qualities for near as well as far object distances.

  17. The Holographic Principle in a Cosmological Setting

    NARCIS (Netherlands)

    Savonije, Ivo Lothar

    2003-01-01

    We study the holographic principle in a cosmological context. First, entropy bounds are derived from the holographic principle and applied within a Anti-de Sitter spacetime. Next, the compatibility of the holographic principle and de Sitter spacetime is considered. The holographic principle is a

  18. Direct measurement of the spectral reflectance of OP-SDL gain elements under optical pumping

    Science.gov (United States)

    Borgentun, Carl; Bengtsson, Jörgen; Larsson, Anders

    2011-08-01

    We report on a direct measurement method for acquiring highly precise reflectance spectra of gain elements for semiconductor disk lasers under optical pumping. The gain element acts as an active mirror, and the active mirror reflectance (AMR) was measured with a weak and tunable probe beam coincident on the gain element with a high-power pump beam. In particular, we measured the spectral AMR of a gain element designed to have a broad and flat AMR spectrum by being anti-resonant at the center wavelength and employing a parametrically optimized anti-reflection structure. We were able to confirm that this sophisticated gain element performs according to design, with an almost constant AMR of ˜103% over a wavelength range of nearly 35 nm, very well matching the simulated behavior. Such gain characteristics are useful for optically pumped semiconductor disk lasers (OP-SDLs) designed for broadband tuning and short-pulse generation through mode-locking. The measurement technique was also applied to a conventional resonant periodic gain element designed for fixed wavelength OP-SDL operation; its AMR spectrum is markedly different with a narrow peak, again in good agreement with the simulations.

  19. Holographic Baryons and Instanton Crystal

    Science.gov (United States)

    Kaplunovsky, Vadim; Melnikov, Dmitry; Sonnenschein, Jacob

    In a wide class of holographic models, like the one proposed by Sakai and Sugimoto, baryons can be approximated by instantons of non-abelian gauge fields that live on the world-volume of flavor D-branes. In the leading order, those are just the Yang-Mills instantons, whose solutions can be constructed from the celebrated ADHM construction. This fact can be used to study various properties of baryons in the holographic limit. In particular, one can attempt to construct a holographic description of the cold dense nuclear matter phase of baryons. It can be argued that holographic baryons in such a regime are necessarily in a solid crystalline phase. In this review we summarize the known results on the construction and phases of crystals of the holographic baryons.

  20. Holographic baryons and instanton crystals

    Science.gov (United States)

    Kaplunovsky, Vadim; Melnikov, Dmitry; Sonnenschein, Jacob

    2015-06-01

    In a wide class of holographic models, like the one proposed by Sakai and Sugimoto, baryons can be approximated by instantons of non-Abelian gauge fields that live on the world-volume of flavor D-branes. In the leading order, those are just the Yang-Mills instantons, whose solutions can be constructed from the celebrated Atiyah-Drinfeld-Hitchin-Manin (ADHM) construction. This fact can be used to study various properties of baryons in the holographic limit. In particular, one can attempt to construct a holographic description of the cold dense nuclear matter phase of baryons. It can be argued that holographic baryons in such a regime are necessarily in a solid crystalline phase. In this review, we summarize the known results on the construction and phases of crystals of the holographic baryons.

  1. A holographic bound for D3-brane

    Energy Technology Data Exchange (ETDEWEB)

    Momeni, Davood; Myrzakul, Aizhan; Myrzakulov, Ratbay [Eurasian National University, Eurasian International Center for Theoretical Physics, Astana (Kazakhstan); Eurasian National University, Department of General Theoretical Physics, Astana (Kazakhstan); Faizal, Mir [University of British Columbia-Okanagan, Irving K. Barber School of Arts and Sciences, Kelowna, BC (Canada); University of Lethbridge, Department of Physics and Astronomy, Lethbridge, AB (Canada); Bahamonde, Sebastian [University College London, Department of Mathematics, London (United Kingdom)

    2017-06-15

    In this paper, we will regularize the holographic entanglement entropy, holographic complexity and fidelity susceptibility for a configuration of D3-branes. We will also study the regularization of the holographic complexity from the action for a configuration of D3-branes. It will be demonstrated that for a spherical shell of D3-branes the regularized holographic complexity is always greater than or equal to the regularized fidelity susceptibility. Furthermore, we will also demonstrate that the regularized holographic complexity is related to the regularized holographic entanglement entropy for this system. Thus, we will obtain a holographic bound involving regularized holographic complexity, regularized holographic entanglement entropy and regularized fidelity susceptibility of a configuration of D3-brane. We will also discuss a bound for regularized holographic complexity from action, for a D3-brane configuration. (orig.)

  2. Future of photorefractive based holographic 3D display

    Science.gov (United States)

    Blanche, P.-A.; Bablumian, A.; Voorakaranam, R.; Christenson, C.; Lemieux, D.; Thomas, J.; Norwood, R. A.; Yamamoto, M.; Peyghambarian, N.

    2010-02-01

    The very first demonstration of our refreshable holographic display based on photorefractive polymer was published in Nature early 20081. Based on the unique properties of a new organic photorefractive material and the holographic stereography technique, this display addressed a gap between large static holograms printed in permanent media (photopolymers) and small real time holographic systems like the MIT holovideo. Applications range from medical imaging to refreshable maps and advertisement. Here we are presenting several technical solutions for improving the performance parameters of the initial display from an optical point of view. Full color holograms can be generated thanks to angular multiplexing, the recording time can be reduced from minutes to seconds with a pulsed laser, and full parallax hologram can be recorded in a reasonable time thanks to parallel writing. We also discuss the future of such a display and the possibility of video rate.

  3. New generation all-silica based optical elements for high power laser systems

    Science.gov (United States)

    Tolenis, T.; GrinevičiÅ«tÄ--, L.; Melninkaitis, A.; Selskis, A.; Buzelis, R.; MažulÄ--, L.; Drazdys, R.

    2017-08-01

    Laser resistance of optical elements is one of the major topics in photonics. Various routes have been taken to improve optical coatings, including, but not limited by, materials engineering and optimisation of electric field distribution in multilayers. During the decades of research, it was found, that high band-gap materials, such as silica, are highly resistant to laser light. Unfortunately, only the production of anti-reflection coatings of all-silica materials are presented to this day. A novel route will be presented in materials engineering, capable to manufacture high reflection optical elements using only SiO2 material and GLancing Angle Deposition (GLAD) method. The technique involves the deposition of columnar structure and tailoring the refractive index of silica material throughout the coating thickness. A numerous analysis indicate the superior properties of GLAD coatings when compared with standard methods for Bragg mirrors production. Several groups of optical components are presented including anti-reflection coatings and Bragg mirrors. Structural and optical characterisation of the method have been performed and compared with standard methods. All researches indicate the possibility of new generation coatings for high power laser systems.

  4. Finite Element Analysis Predicts Large Optic Nerve Head Strains During Horizontal Eye Movements.

    Science.gov (United States)

    Wang, Xiaofei; Rumpel, Helmut; Lim, Winston Eng Hoe; Baskaran, Mani; Perera, Shamira A; Nongpiur, Monisha E; Aung, Tin; Milea, Dan; Girard, Michaël J A

    2016-05-01

    We combined finite element (FE) analysis and dynamic magnetic resonance imaging (MRI) to estimate optic nerve head (ONH) strains during horizontal eye movements, and identified factors influencing such strains. We also compared ONH strains (prelamina, lamina cribrosa, and retrolamina strains) induced by eye movements to those induced by IOP. The ocular globes and orbits of a healthy subject were visualized during horizontal eye movements (up to 13°), using dynamic MRI. A baseline FE model of one eye was reconstructed in the primary gaze position, including details from the orbital and ONH tissues. Finite element-derived ONH strains induced by eye movements were compared to those resulting from an IOP of 50 mm Hg. Finally, a FE sensitivity study was performed, in which we varied the stiffness of all ONH connective tissues, to understand their influence on ONH strains. Our models predicted that, during horizontal eye movements, the optic nerve pulled the ONH posteriorly. Optic nerve head strains following a lateral eye movement of 13° were large and higher than those resulting from an IOP of 50 mm Hg. These results held true even with variations in connective tissue stiffness. We also found that stiff sclerae reduced lamina cribrosa and prelamina strains during eye movements, but stiff optic nerve sheaths significantly increased those strains. Our models predicted high ONH strains during eye movements, which were aggravated with stiffer optic nerve sheaths. Further studies are needed to explore links between ONH strains induced by eye movements and axonal loss in glaucoma.

  5. Microchip Flow Cytometer with Integrated Polymer Optical Elements for Measurement of Scattered Light

    DEFF Research Database (Denmark)

    Wang, Zhenyu; El-Ali, Jamil; Perch-Nielsen, Ivan Ryberg

    2004-01-01

    Flow cytometry is a very powerful method for biophysical measurement of microparticles, such as cells and bacteria. In this paper, we report an innovative microsystem, in which several different optical elements (waveguides, lenses and fiber-to-waveguide couplers) are integrated with microfluidic...... extinction showed excellent linear relationship with the sizes of the beads. To our knowledge this is the first time forward scattered light and incident light extinction were measured in a microsystem using integrated optics. The microsystem can be applied for analyzing different kinds of particles...... and cells, and can easily be integrated with other microfluidic components....

  6. Optical Response to Submicron Digital Elements Simulated by FDTD Wavelets with Refractive Impulse

    Directory of Open Access Journals (Sweden)

    Antony J. Bourdillon

    2014-01-01

    Full Text Available Accurate simulation from digital, submicron, optical elements is obtained by finite difference time domain (FDTD results that are phase analyzed as sources for Huygens wavelets on fine scales much shorter than the wavelength used. Results, from the MIT electromagnetic evaluation program, are renormalized by a method here called “refractive impulse.” This is valid for polarized responses from digital diffractive and focusing optics. The method is employed with plane wave incidence at any angle or with diverging or converging beams. It is more systematic, more versatile, and more accurate than commercial substitutes.

  7. Rare-Earth Elements in Lighting and Optical Applications and Their Recycling

    Science.gov (United States)

    Song, Xin; Chang, Moon-Hwan; Pecht, Michael

    2013-10-01

    Rare-earth elements (REEs) are used in lighting and optical applications to enable color and light adjustment, miniaturization, and energy efficiency. Common applications of REEs include phosphors for light-emitting diodes, lasers, and electronic video displays. This article reviews how REEs are widely used in these applications. However, supply constraints, including rising prices, environmental concerns over mining and refining processes, and China's control over the supply of the vast majority of REEs, are of concern for manufacturers. In view of these supply constraints, this article discusses ways for manufacturers of lighting and optical devices to identify potential substitutes and recycling methods for REEs.

  8. Glass Difractive Optical Elements (DOEs with complex modulation DLC thin film coated

    Directory of Open Access Journals (Sweden)

    Marina Sparvoli

    2008-09-01

    Full Text Available We developed a complex (amplitude and phase modulation Diffractive Optical Element (DOE with four phase levels, which is based in a glass substrate coated with DLC (Diamond Like Carbon thin film as the amplitude modulator. The DLC film was deposited by magnetron reactive sputtering with a graphite target and methane gas in an optical glass surface. The glass and DLC film roughness were measured using non destructive methods, such as a high step meter, Atomic Force Microscopy and Diffuse Reflectance. Other properties, such as refractive index of both materials were measured. The DOEs were tested using 632.8 nm HeNe laser.

  9. Holographic polymer dispersed liquid crystal enhanced by introducing urethane trimethacrylate.

    Science.gov (United States)

    Nataj, Nahid Hosein; Mohajerani, Ezeddin; Jashnsaz, Hossein; Jannesari, Ali

    2012-02-20

    This work characterizes holographic polymer dispersed liquid crystals (HPDLC) composite material based on a new monomer, urethane trimethacrylate, by fabricating switchable diffraction grating. The highest diffraction efficiency achieved was 90.3%. Details of the fabrication and preliminary results of electro-optical switching of the HPDLC diffraction gratings are presented and discussed based on the functionality of the monomer. These experimental results are explained by means of morphological scanning electron microscopy analyses. © 2012 Optical Society of America

  10. Optically Controlled Reconfigurable Antenna Array Based on E-Shaped Elements

    Directory of Open Access Journals (Sweden)

    Arismar Cerqueira Sodré Junior

    2014-01-01

    Full Text Available This work presents the development of optically controlled reconfigurable antenna arrays. They are based on two patch elements with E-shaped slots, a printed probe, and a photoconductive switch made from an intrinsic silicon die. Numerical simulations and experiments have been shown to be in agreement, and both demonstrate that the frequency response of the antenna arrays can be efficiently reconfigured over two different frequency ISM bands, namely, 2.4 and 5 GHz. A measured gain of 12.5 dBi has been obtained through the use of two radiating elements printed in a low-cost substrate and a dihedral corner reflector.

  11. Integral imaging-based large-scale full-color 3-D display of holographic data by using a commercial LCD panel.

    Science.gov (United States)

    Dong, Xiao-Bin; Ai, Ling-Yu; Kim, Eun-Soo

    2016-02-22

    We propose a new type of integral imaging-based large-scale full-color three-dimensional (3-D) display of holographic data based on direct ray-optical conversion of holographic data into elemental images (EIs). In the proposed system, a 3-D scene is modeled as a collection of depth-sliced object images (DOIs), and three-color hologram patterns for that scene are generated by interfering each color DOI with a reference beam, and summing them all based on Fresnel convolution integrals. From these hologram patterns, full-color DOIs are reconstructed, and converted into EIs using a ray mapping-based direct pickup process. These EIs are then optically reconstructed to be a full-color 3-D scene with perspectives on the depth-priority integral imaging (DPII)-based 3-D display system employing a large-scale LCD panel. Experiments with a test video confirm the feasibility of the proposed system in the practical application fields of large-scale holographic 3-D displays.

  12. Cellular Dynamics Revealed by Digital Holographic Microscopy☆

    KAUST Repository

    Marquet, P.

    2016-11-22

    Digital holographic microscopy (DHM) is a new optical method that provides, without the use of any contrast agent, real-time, three-dimensional images of transparent living cells, with an axial sensitivity of a few tens of nanometers. They result from the hologram numerical reconstruction process, which permits a sub wavelength calculation of the phase shift, produced on the transmitted wave front, by the optically probed cells, namely the quantitative phase signal (QPS). Specifically, in addition to measurements of cellular surface morphometry and intracellular refractive index (RI), various biophysical cellular parameters including dry mass, absolute volume, membrane fluctuations at the nanoscale and biomechanical properties, transmembrane water permeability as swell as current, can be derived from the QPS. This article presents how quantitative phase DHM (QP-DHM) can explored cell dynamics at the nanoscale with a special attention to both the study of neuronal dynamics and the optical resolution of local neuronal network.

  13. Digital Holographic Microscopy Principles, Techniques, and Applications

    CERN Document Server

    Kim, Myung K

    2011-01-01

    Digital holography is an emerging field of new paradigm in general imaging applications. By replacing the photochemical procedures with electronic imaging and having a direct numerical access to the complex optical field, a wide range of new imaging capabilities become available, many of them difficult or infeasible in conventional holography. An increasing number of researchers—not only in optical physics and optical engineering, but also in diverse applications areas such as microbiology, medicine, marine science, particle analysis, microelectromechanics, and metrology—are realizing and exploiting the new capabilities of digital holography. Digital Holographic Microscopy: Principles, Techniques, and Applications, by Dr. Myung K. Kim, is intended to provide a brief but consistent introduction to the principles of digital holography as well as to give an organized overview of the large number of techniques and applications being developed. This will also shed some light on the range of possibilities for f...

  14. Holographic effective field theories

    Energy Technology Data Exchange (ETDEWEB)

    Martucci, Luca [Dipartimento di Fisica ed Astronomia “Galileo Galilei' , Università di Padova,and INFN - Sezione di Padova, Via Marzolo 8, I-35131 Padova (Italy); Zaffaroni, Alberto [Dipartimento di Fisica, Università di Milano-Bicocca,and INFN - Sezione di Milano-Bicocca, I-20126 Milano (Italy)

    2016-06-28

    We derive the four-dimensional low-energy effective field theory governing the moduli space of strongly coupled superconformal quiver gauge theories associated with D3-branes at Calabi-Yau conical singularities in the holographic regime of validity. We use the dual supergravity description provided by warped resolved conical geometries with mobile D3-branes. Information on the baryonic directions of the moduli space is also obtained by using wrapped Euclidean D3-branes. We illustrate our general results by discussing in detail their application to the Klebanov-Witten model.

  15. Holographic twin Higgs model.

    Science.gov (United States)

    Geller, Michael; Telem, Ofri

    2015-05-15

    We present the first realization of a "twin Higgs" model as a holographic composite Higgs model. Uniquely among composite Higgs models, the Higgs potential is protected by a new standard model (SM) singlet elementary "mirror" sector at the sigma model scale f and not by the composite states at m_{KK}, naturally allowing for m_{KK} beyond the LHC reach. As a result, naturalness in our model cannot be constrained by the LHC, but may be probed by precision Higgs measurements at future lepton colliders, and by direct searches for Kaluza-Klein excitations at a 100 TeV collider.

  16. Holographic magnetisation density waves

    Energy Technology Data Exchange (ETDEWEB)

    Donos, Aristomenis [Centre for Particle Theory and Department of Mathematical Sciences, Durham University,Stockton Road, Durham, DH1 3LE (United Kingdom); Pantelidou, Christiana [Departament de Fisica Quantica i Astrofisica & Institut de Ciencies del Cosmos (ICC),Universitat de Barcelona,Marti i Franques 1, 08028 Barcelona (Spain)

    2016-10-10

    We numerically construct asymptotically AdS black brane solutions of D=4 Einstein theory coupled to a scalar and two U(1) gauge fields. The solutions are holographically dual to d=3 CFTs in a constant external magnetic field along one of the U(1)’s. Below a critical temperature the system’s magnetisation density becomes inhomogeneous, leading to spontaneous formation of current density waves. We find that the transition can be of second order and that the solutions which minimise the free energy locally in the parameter space of solutions have averaged stressed tensor of a perfect fluid.

  17. Generalized holographic cosmology

    Science.gov (United States)

    Banerjee, Souvik; Bhowmick, Samrat; Sahay, Anurag; Siopsis, George

    2013-04-01

    We consider general black hole solutions in five-dimensional spacetime in the presence of a negative cosmological constant. We obtain a cosmological evolution via the gravity/gauge theory duality (holography) by defining appropriate boundary conditions on a four-dimensional boundary hypersurface. The standard counterterms are shown to renormalize the bare parameters of the system (the four-dimensional Newton's constant and cosmological constant). We discuss the thermodynamics of cosmological evolution and present various examples. The standard brane-world scenarios are shown to be special cases of our holographic construction.

  18. Integration of non-Lambertian LED and reflective optical element as efficient street lamp.

    Science.gov (United States)

    Pan, Jui-Wen; Tu, Sheng-Han; Sun, Wen-Shing; Wang, Chih-Ming; Chang, Jenq-Yang

    2010-06-21

    A cost effective, high throughput, and high yield method for the increase of street lamp potency was proposed in this paper. We integrated the imprinting technology and the reflective optical element to obtain a street lamp with high illumination efficiency and without glare effect. The imprinting technique can increase the light extraction efficiency and modulate the intensity distribution in the chip level. The non-Lambertian light source was achieved by using imprinting technique. The compact reflective optical element was added to efficiently suppress the emitting light intensity with small emitting angle for the uniform of illumination intensity and excluded the light with high emitting angle for the prevention of glare. Compared to the conventional street lamp, the novel design has 40% enhancement in illumination intensity, the uniform illumination and the glare effect elimination.

  19. Optical Testing and Verification Methods for the James Webb Space Telescope Integrated Science Instrument Module Element

    Science.gov (United States)

    Antonille, Scott R.; Miskey, Cherie L.; Ohl, Raymond G.; Rohrbach, Scott O.; Aronstein, David L.; Bartoszyk, Andrew E.; Bowers, Charles W.; Cofie, Emmanuel; Collins, Nicholas R.; Comber, Brian J.; hide

    2016-01-01

    NASA's James Webb Space Telescope (JWST) is a 6.6m diameter, segmented, deployable telescope for cryogenic IR space astronomy (40K). The JWST Observatory includes the Optical Telescope Element (OTE) and the Integrated Science Instrument Module (ISIM) that contains four science instruments (SI) and the fine guider. The SIs are mounted to a composite metering structure. The SI and guider units were integrated to the ISIM structure and optically tested at the NASA Goddard Space Flight Center as a suite using the Optical Telescope Element SIMulator (OSIM). OSIM is a full field, cryogenic JWST telescope simulator. SI performance, including alignment and wave front error, were evaluated using OSIM. We describe test and analysis methods for optical performance verification of the ISIM Element, with an emphasis on the processes used to plan and execute the test. The complexity of ISIM and OSIM drove us to develop a software tool for test planning that allows for configuration control of observations, associated scripts, and management of hardware and software limits and constraints, as well as tools for rapid data evaluation, and flexible re-planning in response to the unexpected. As examples of our test and analysis approach, we discuss how factors such as the ground test thermal environment are compensated in alignment. We describe how these innovative methods for test planning and execution and post-test analysis were instrumental in the verification program for the ISIM element, with enough information to allow the reader to consider these innovations and lessons learned in this successful effort in their future testing for other programs.

  20. 'Smart', remote holographic processor based on the materials characteristics of LiNbO3

    Science.gov (United States)

    Vahey, D. W.

    1978-01-01

    A class of 'Smart' remote holographic processors based on the material characteristics of LiNbO3 is introduced. The processors rely on holographic subtraction to detect differences in optical wavefronts that are spatially modulated to reflect either incoming or reference information. The state of the art of their fabrication and performance is described in the following paper. This paper outlines the principles of holography and photorefractivity that make these processors possible. Particular emphasis is placed on a potential mode of operation termed self-subtraction, in which the holographic processor is able to adapt to changes in reference information without the need for commands from an external operator.

  1. Invariant correlation filter with linear phase coefficient holographic realization in 4-F correlator

    Science.gov (United States)

    Evtikhiev, Nickolay N.; Starikov, Sergey N.; Shaulskiy, Dmitriy V.; Starikov, Rostislav S.; Zlokazov, Evgeny Yu.

    2011-06-01

    Realization of distortion invariant correlation filters in optical image correlators open possibilities for object identification with remarkably high computational capabilities. Application of the linear phase coefficient composite filter (LPCCF) is attractive for recognition of binary edged images. We use methods of digital holographic synthesis to realize LPCCF in a coherent 4-F correlator as a computer-generated amplitude holographic filter. A high resolution spatial light modulator (SLM) has to be implemented for such a filter representation. Transparency limitations of high frame rate and high resolution SLM's and its effect on recognition performance of holographic filter in the 4-F correlator are discussed in the given paper.

  2. An automatic holographic adaptive phoropter

    Science.gov (United States)

    Amirsolaimani, Babak; Peyghambarian, N.; Schwiegerling, Jim; Bablumyan, Arkady; Savidis, Nickolaos; Peyman, Gholam

    2017-08-01

    Phoropters are the most common instrument used to detect refractive errors. During a refractive exam, lenses are flipped in front of the patient who looks at the eye chart and tries to read the symbols. The procedure is fully dependent on the cooperation of the patient to read the eye chart, provides only a subjective measurement of visual acuity, and can at best provide a rough estimate of the patient's vision. Phoropters are difficult to use for mass screenings requiring a skilled examiner, and it is hard to screen young children and the elderly etc. We have developed a simplified, lightweight automatic phoropter that can measure the optical error of the eye objectively without requiring the patient's input. The automatic holographic adaptive phoropter is based on a Shack-Hartmann wave front sensor and three computercontrolled fluidic lenses. The fluidic lens system is designed to be able to provide power and astigmatic corrections over a large range of corrections without the need for verbal feedback from the patient in less than 20 seconds.

  3. Computer-aided manufacturing for freeform optical elements by ultraprecision micromilling

    Science.gov (United States)

    Stoebenau, Sebastian; Kleindienst, Roman; Hofmann, Meike; Sinzinger, Stefan

    2011-09-01

    The successful fabrication of several freeform optical elements by ultraprecision micromilling is presented in this article. We discuss in detail the generation of the tool paths using different variations of a computer-aided manufacturing (CAM) process. Following a classical CAM approach, a reflective beam shaper was fabricated. The approach is based on a solid model calculated by optical design software. As no analytical description of the surface is needed, this procedure is the most general solution for the programming of the tool paths. A second approach is based on the same design data. But instead of a solid model, a higher order polynomial was fitted to the data using computational methods. Taking advantage of the direct programming capabilities of state-of-the-art computerized numerical control units, the mathematics to calculate the polynomial based tool paths on-the-fly during the machining process are implemented in a highly flexible CNC code. As another example for this programming method, the fabrication of a biconic lens from a closed analytical description directly derived from the optical design is shown. We provide details about the different programming methods and the fabrication processes as well as the results of characterizations concerning surface quality and shape accuracy of the freeform optical elements.

  4. Nonlinear unitary transformations of space-variant polarized light fields from self-induced geometric-phase optical elements

    Science.gov (United States)

    Kravets, Nina; Brasselet, Etienne

    2018-01-01

    We propose to couple the optical orientational nonlinearities of liquid crystals with their ability to self-organize to tailor them to control space-variant-polarized optical fields in a nonlinear manner. Experimental demonstration is made using a liquid crystal light valve that behaves like a light-driven geometric phase optical element. We also unveil two original nonlinear optical processes, namely self-induced separability and nonseparability. These results contribute to the advancement of nonlinear singular optics that is still in its infancy despite 25 years of effort, which may foster the development of nonlinear protocols to manipulate high-dimensional optical information both in the classical and quantum regimes.

  5. Fischler Susskind holographic cosmology revisited

    Science.gov (United States)

    Diaz, Pablo; Per, M. A.; Segui, Antonio

    2007-11-01

    When Fischler and Susskind proposed a holographic prescription based on the particle horizon, they found that spatially closed cosmological models do not verify it due to the apparently unavoidable recontraction of the particle horizon area. In this paper, after a short review of their original work, we expose graphically and analytically that spatially closed cosmological models can avoid this problem if they expand fast enough. It has also been shown that the holographic principle is saturated for a codimension one-brane dominated universe. The Fischler Susskind prescription is used to obtain the maximum number of degrees of freedom per Planck volume at the Planck era compatible with the holographic principle.

  6. The traveltime holographic principle

    KAUST Repository

    Huang, Y.

    2014-11-06

    Fermat\\'s interferometric principle is used to compute interior transmission traveltimes τpq from exterior transmission traveltimes τsp and τsq. Here, the exterior traveltimes are computed for sources s on a boundary B that encloses a volume V of interior points p and q. Once the exterior traveltimes are computed, no further ray tracing is needed to calculate the interior times τpq. Therefore this interferometric approach can be more efficient than explicitly computing interior traveltimes τpq by ray tracing. Moreover, the memory requirement of the traveltimes is reduced by one dimension, because the boundary B is of one fewer dimension than the volume V. An application of this approach is demonstrated with interbed multiple (IM) elimination. Here, the IMs in the observed data are predicted from the migration image and are subsequently removed by adaptive subtraction. This prediction is enabled by the knowledge of interior transmission traveltimes τpq computed according to Fermat\\'s interferometric principle. We denote this principle as the ‘traveltime holographic principle’, by analogy with the holographic principle in cosmology where information in a volume is encoded on the region\\'s boundary.

  7. Temperature dependence of anisotropic diffraction in holographic polymer-dispersed liquid crystal memory.

    Science.gov (United States)

    Ogiwara, Akifumi; Watanabe, Minoru; Moriwaki, Retsu

    2013-09-10

    Grating devices using photosensitive organic materials play an important role in the development of optical and optoelectronic systems. High diffraction efficiency and polarization dependence achieved in a holographic polymer-dispersed liquid crystal (HPDLC) grating are expected to provide polarization-controllable optical devices, such as a holographic memory for optically reconfigurable gate arrays (ORGAs). However, the optical property is affected by the thermal modulation around the transition temperature (T(ni)) where the liquid crystal (LC) changes from nematic to isotropic phases. The temperature dependence of the diffraction efficiency in HPDLC grating is investigated using four types of LC composites comprised of LCs and monomers having different physical properties such as T(ni) and anisotropic refractive indices. The holographic memory formed by the LC with low anisotropic refractive index and LC diacrylate monomer implements optical reconfiguration for ORGAs at a high temperature beyond T(ni) of LC.

  8. Magnifications of Single and Dual Element Accommodative Intraocular Lenses: Paraxial Optics Analysis

    Science.gov (United States)

    Ale, Jit B; Manns, Fabrice; Ho, Arthur

    2010-01-01

    Purpose Using an analytical approach of paraxial optics, we evaluated the magnification of a model eye implanted with single-element (1E) and dual-element (2E) translating-optics accommodative intraocular lenses (AIOL) with an objective of understanding key control parameters relevant to their design. Potential clinical implications of the results arising from pseudophakic accommodation were also considered. Methods Lateral and angular magnifications in a pseudophakic model eye were analyzed using the matrix method of paraxial optics. The effects of key control parameters such as direction (forward or backward) and distance (0 to 2 mm) of translation, power combinations of the 2E-AIOL elements (front element power range +20.0 D to +40.0 D), and amplitudes of accommodation (0 to 4 D) were tested. Relative magnification, defined as the ratio of the retinal image size of the accommodated eye to that of unaccommodated phakic (rLM1) or pseudophakic (rLM2) model eyes, was computed to determine how retinal image size changes with pseudophakic accommodation. Results Both lateral and angular magnifications increased with increased power of the front element in 2E-AIOL and amplitude of accommodation. For a 2E-AIOL with front element power of +35 D, rLM1 and rLM2 increased by 17.0% and 16.3%, respectively, per millimetre of forward translation of the element, compared to the magnification at distance focus (unaccommodated). These changes correspond to a change of 9.4% and 6.5% per dioptre of accommodation, respectively. Angular magnification also increased with pseudophakic accommodation. 1E-AIOLs produced consistently less magnification than 2E-AIOLs. Relative retinal image size decreased at a rate of 0.25% with each dioptre of accommodation in the phakic model eye. The position of the image space nodal point shifted away from the retina (towards the cornea) with both phakic and pseudophakic accommodation. Conclusion Power of the mobile element, and amount and direction of

  9. Laboratory reflectometer for the investigation of optical elements in a wavelength range of 5-50 nm: description and testing results

    Science.gov (United States)

    Garakhin, S. A.; Zabrodin, I. G.; Zuev, S. E.; Kas'kov, I. A.; Lopatin, A. Ya.; Nechay, A. N.; Polkovnikov, V. N.; Salashchenko, N. N.; Tsybin, N. N.; Chkhalo, N. I.; Svechnikov, M. V.

    2017-05-01

    We describe a laboratory reflectometer developed at the IPM RAS for precision measurements of spectral and angular dependences of the reflection and transmission coefficients of optical elements in a wavelength range of 5-50 nm. The radiation is monochromatised using a high-resolution Czerny-Turner spectrometer with a plane diffraction grating and two spherical collimating mirrors. A toroidal mirror focuses the probe monochromatic beam on a sample. The X-ray source is a highly ionised plasma produced in the interaction of a high-power laser beam with a solid target at an intensity of 1011-1012 W cm-2. To stabilise the emission characteristics, the target executes translatory and rotary motions in such a way that every pulse irradiates a new spot. The short-focus lens is protected from contamination by erosion products with the use of a specially designed electromagnetic system. The samples under study are mounted on a goniometer is accommodated in a dedicated chamber, which provides five degrees of freedom for samples up to 500 mm in diameter and two degrees of freedom for a detector. The sample mass may range up to 10 kg. The X-ray radiation is recorded with a detector composed of a CsI photocathode and two microchannel plates. A similar detector monitors the probe beam intensity. The spectral reflectometer resolution is equal to 0.030 nm with the use of ruled gratings with a density of 900 lines mm-1 (spectral range: 5-20 nm) and to 0.067 nm for holographic gratings with a density of 400 lines mm-1 (spectral range: 10-50 nm). We analyse the contribution of higher diffraction orders to the probe signal intensity and the ways of taking it into account in the measurements. Examples are given which serve to illustrate the reflectometer application to the study of multilayer mirrors and filters.

  10. Soft x-ray magneto-optic Kerr rotation and element-specific hysteresis measurement

    Energy Technology Data Exchange (ETDEWEB)

    Kortright, J.B.; Rice, M.

    1996-03-01

    Soft x-ray magneto-optic Kerr rotation has been measured using a continuously tunable multilayer linear polarizer in the beam reflected form samples in applied magnetic fields. Like magnetic circular dichroism, Kerr rotation in the soft x-ray can be element - specific and much larger than in the visible spectral range when the photon energy is tuned near atomic core resonances. Thus sensitive element-specific hysteresis measurements are possible with this technique. Examples showing large Kerr rotation from an Fe film and element-specific hysteresis loops of the Fe and Cr in an Fe/Cr multilayer demonstrate these new capabilities. Some consequences of the strong anomalous dispersion near the FeL{sub 2,3} edges to the Kerr rotation are discussed.

  11. A 3D acquisition method for holographic display

    Science.gov (United States)

    Yue, Weirui; Liu, Jingdan; Situ, Guohai

    2014-11-01

    It is well known that holographic display can provide 3D scenes with continuous viewpoints and is free of accommodation-convergence conflict. So far most of the research in this area focuses on the display end, leaving the acquisition end merely explored. For holographic content acquisition, one needs to capture the scene in 3D. Ways to do this include the traditional optical holography and integral imaging. However, optical holography suffers from serious speckle while integral imaging has a long march to increase the resolution. In this paper, we propose a technique based on a variation of the transport of intensity equation to calculate the "phase" information of a scene from its defocusd intensity captured by a color camera under white light illumination. With the defocused phase and intensity data at hand, we can calculate the infocused wavefront of the scene, and further encode it into a computer generated hologram for subsequent holographic display. We demonstrate the proposed technique by simulation and experimental results. Compared with existing 3D acquisition techniques for holographic display, our method may provide better viewing experience due to the free of speckle in the acquisition stage, as well as the fact that the resolution does not limited by the microlenslet.

  12. Holographic photolysis for multiple cell stimulation in mouse hippocampal slices.

    Directory of Open Access Journals (Sweden)

    Morad Zahid

    Full Text Available BACKGROUND: Advanced light microscopy offers sensitive and non-invasive means to image neural activity and to control signaling with photolysable molecules and, recently, light-gated channels. These approaches require precise and yet flexible light excitation patterns. For synchronous stimulation of subsets of cells, they also require large excitation areas with millisecond and micrometric resolution. We have recently developed a new method for such optical control using a phase holographic modulation of optical wave-fronts, which minimizes power loss, enables rapid switching between excitation patterns, and allows a true 3D sculpting of the excitation volumes. In previous studies we have used holographic photololysis to control glutamate uncaging on single neuronal cells. Here, we extend the use of holographic photolysis for the excitation of multiple neurons and of glial cells. METHODS/PRINCIPAL FINDINGS: The system combines a liquid crystal device for holographic patterned photostimulation, high-resolution optical imaging, the HiLo microscopy, to define the stimulated regions and a conventional Ca(2+ imaging system to detect neural activity. By means of electrophysiological recordings and calcium imaging in acute hippocampal slices, we show that the use of excitation patterns precisely tailored to the shape of multiple neuronal somata represents a very efficient way for the simultaneous excitation of a group of neurons. In addition, we demonstrate that fast shaped illumination patterns also induce reliable responses in single glial cells. CONCLUSIONS/SIGNIFICANCE: We show that the main advantage of holographic illumination is that it allows for an efficient excitation of multiple cells with a spatiotemporal resolution unachievable with other existing approaches. Although this paper focuses on the photoactivation of caged molecules, our approach will surely prove very efficient for other probes, such as light-gated channels, genetically

  13. Linearity of holographic entanglement entropy

    National Research Council Canada - National Science Library

    Almheiri, Ahmed; Dong, Xi; Swingle, Brian

    2017-01-01

    We consider the question of whether the leading contribution to the entanglement entropy in holographic CFTs is truly given by the expectation value of a linear operator as is suggested by the Ryu-Takayanagi formula...

  14. Adventures in Holographic Dimer Models

    Energy Technology Data Exchange (ETDEWEB)

    Kachru, Shamit; /Stanford U., Phys. Dept. /SLAC; Karch, Andreas; /Washington U., Seattle; Yaida, Sho; /Stanford U., Phys. Dept.

    2011-08-12

    We abstract the essential features of holographic dimer models, and develop several new applications of these models. Firstly, semi-holographically coupling free band fermions to holographic dimers, we uncover novel phase transitions between conventional Fermi liquids and non-Fermi liquids, accompanied by a change in the structure of the Fermi surface. Secondly, we make dimer vibrations propagate through the whole crystal by way of double trace deformations, obtaining nontrivial band structure. In a simple toy model, the topology of the band structure experiences an interesting reorganization as we vary the strength of the double trace deformations. Finally, we develop tools that would allow one to build, in a bottom-up fashion, a holographic avatar of the Hubbard model.

  15. Adventures in holographic dimer models

    Science.gov (United States)

    Kachru, Shamit; Karch, Andreas; Yaida, Sho

    2011-03-01

    We abstract the essential features of holographic dimer models, and develop several new applications of these models. Firstly, semi-holographically coupling free band fermions to holographic dimers, we uncover novel phase transitions between conventional Fermi liquids and non-Fermi liquids, accompanied by a change in the structure of the Fermi surface. Secondly, we make dimer vibrations propagate through the whole crystal by way of double trace deformations, obtaining nontrivial band structure. In a simple toy model, the topology of the band structure experiences an interesting reorganization as we vary the strength of the double trace deformations. Finally, we develop tools that would allow one to build, in a bottom-up fashion, a holographic avatar of the Hubbard model.

  16. Holographic memory for high-density data storage and high-speed pattern recognition

    Science.gov (United States)

    Gu, Claire

    2002-09-01

    As computers and the internet become faster and faster, more and more information is transmitted, received, and stored everyday. The demand for high density and fast access time data storage is pushing scientists and engineers to explore all possible approaches including magnetic, mechanical, optical, etc. Optical data storage has already demonstrated its potential in the competition against other storage technologies. CD and DVD are showing their advantages in the computer and entertainment market. What motivated the use of optical waves to store and access information is the same as the motivation for optical communication. Light or an optical wave has an enormous capacity (or bandwidth) to carry information because of its short wavelength and parallel nature. In optical storage, there are two types of mechanism, namely localized and holographic memories. What gives the holographic data storage an advantage over localized bit storage is the natural ability to read the stored information in parallel, therefore, meeting the demand for fast access. Another unique feature that makes the holographic data storage attractive is that it is capable of performing associative recall at an incomparable speed. Therefore, volume holographic memory is particularly suitable for high-density data storage and high-speed pattern recognition. In this paper, we review previous works on volume holographic memories and discuss the challenges for this technology to become a reality.

  17. Coherent Beam Combining Element for Five 150-W Fiber Lasers by Volume Bragg Gratings in PTR Glass

    Science.gov (United States)

    2011-08-03

    centimeter, make PTR-glass holograms attractive for high-power laser applications. A volume holographic optical element is an interference pattern...PTR glass……………………………………….. 3 2 Optical scheme of coherent coupling of laser diodes. a) combining of independent diodes, b) spectral locking of LD-1, c...the split beams…………………………………… 14 13 Optical setup for the measurement of the phase shift induced by Laser heating in an optical flat. W: wedge, L

  18. Radial super-resolution in digital holographic microscopy using structured illumination with circular symmetry

    Science.gov (United States)

    Yin, Yujian; Su, Ping; Ma, Jianshe

    2018-01-01

    A method to improve the radial resolution using special structured light is proposed in the field of digital holographic microscopy (DHM). A specimen is illuminated with circular symmetrical structured light that makes the spectrum have radial movement, so that high frequency components of the specimen are moved into the passband of the receiver to overcome the diffraction limit. In the DHM imaging system, Computer Generated Hologram (CGH) technology is used to generate the required structured light grating. Then the grating is loaded into a spatial light modulator (SLM) to obtain specific structured illumination. After recording the hologram, digital reconstruction, for the microstructure of a binary optical element that needs to observe radial distribution, the radial resolution of the specimen is improved experimentally compare it with the result of one-dimensional sinusoidal structured light imaging. And a method of designing structured light is presented.

  19. Soft-x-ray magneto-optical Kerr effect and element-specific hysteresis measurement

    Energy Technology Data Exchange (ETDEWEB)

    Kortright, J.B.; Rice, M. [Lawrence Berkeley National Lab., CA (United States)

    1997-04-01

    Interest in the utilization of x-ray magneto-optical properties to provide element-specific magnetic information, combined with recent development of tunable linear polarizers for spectroscopic polarization measurement, have led the authors to the study of magneto-optical rotation (MOR) near core levels of magnetic atoms in magnetic multilayer and alloy films. Their initial observation of Faraday rotation (in transmission) demonstrated that for Fe MOR is easily measured and is larger at its L{sub 3} resonance than in the near-visible spectral regions. This work also demonstrated that the spectroscopic behavior of the MOR signal in transmission, resulting from the differential reaction of left- and right-circular components of a linearly polarized beam, is related to the magnetic circular dichroism (MCD), or differential absorption, as expected by a Kramers-Kronig transformation. Thus MCD measurements using circular polarization and MOR measurements using linear polarization can provide complementary, and in some cases equivalent, information. On beamline 6.3.2 the authors have begun to investigate soft x-ray MOR in the reflection geometry, the x-ray magneto-optic Kerr effect (XMOKE). Early measurements have demonstrated the ability to measure element-specific hysteresis loops and large rotations compared to analogous near-visible measurements. The authors are investigating the spectral dependence of the XMOKE signal, and have initiated systematic materials studies of sputter-deposited films of Fe, Fe{sub x}Cr{sub 1{minus}x} alloys, and Fe/Cr multilayers.

  20. Digital holographic interferometer with correction of distortions

    Science.gov (United States)

    Sevryugin, A. A.; Pulkin, S. A.; Tursunov, I. M.; Venediktov, D. V.; Venediktov, V. Y.

    2015-10-01

    The paper considers the use of holographic interferometer for hologram re-recording with correction of distortions. Each optical system contains some beam path deviations, called aberrations of the optical system. They are seen in the resulting interference pattern as a distortion of fringes. While increasing the sensitivity of the interference pattern by N times at the same time we introduce new aberrations, caused by re-recording setup in addition to aberrations that are already presented on the interferogram, caused by initial recording, also multiplied by N times. In this experiment we decided to use a modified setup with spatially combined interferograms with use of matrix spatial light modulator and digital image processing of the interferograms recorded by CCD or CMOS camera.

  1. Progress in high-resolution x-ray holographic microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Jacobsen, C.; Kirz, J.; Howells, M.; McQuaid, K.; Rothman, S.; Feder, R.; Sayre, D.

    1987-07-01

    Among the various types of x-ray microscopes that have been demonstrated, the holographic microscope has had the largest gap between promise and performance. The difficulties of fabricating x-ray optical elements have led some to view holography as the most attractive method for obtaining the ultimate in high resolution x-ray micrographs; however, we know of no investigations prior to 1987 that clearly demonstrated submicron resolution in reconstructed images. Previous efforts suffered from problems such as limited resolution and dynamic range in the recording media, low coherent x-ray flux, and aberrations and diffraction limits in visible light reconstruction. We have addressed the recording limitations through the use of an undulator x-ray source and high-resolution photoresist recording media. For improved results in the readout and reconstruction steps, we have employed metal shadowing and transmission electron microscopy, along with numerical reconstruction techniques. We believe that this approach will allow holography to emerge as a practical method of high-resolution x-ray microscopy. 30 refs., 4 figs.

  2. Digital holographic microscopy for the characterization of microelectromechanical systems

    Science.gov (United States)

    Pagliarulo, V.; Miccio, L.; Ferraro, P.

    2016-04-01

    Digital holography (DH) in microscopy became an important interferometric tool in optical metrology since when camera sensors reached a higher pixel number with smaller size allowing to acquire more defined images and high-speed computers became able to process such data. Consequently, it was possible the investigation of engineered surfaces on micro-scale, such as micro-electromechanical systems (MEMS) that are micro-devices composed by mechanical elements, electronics, sensors and actuators built in a small volume, realized using different material layers superimposed in various process steps, usually starting from a silicon substrate. In DH is necessary to perform the reconstruction of the wave field by means of numerical tools. This entails a computational burden but offers the possibility of retrieving not only the intensity of the acquired wave field, but also the phase distribution. This work describes the principles of DH and shows some interesting numerical tools suitable to process the holographic images in the field of MEMS. The use of different numerical tools is discussed and illustrated with examples taken from the literature.

  3. On holographic defect entropy

    Energy Technology Data Exchange (ETDEWEB)

    Estes, John [Blackett Laboratory, Imperial College,London SW7 2AZ (United Kingdom); Jensen, Kristan [Department of Physics and Astronomy, University of Victoria,Victoria, BC V8W 3P6 (Canada); C.N. Yang Institute for Theoretical Physics, SUNY Stony Brook,Stony Brook, NY 11794-3840 (United States); O’Bannon, Andy [Rudolf Peierls Centre for Theoretical Physics, University of Oxford,1 Keble Road, Oxford OX1 3NP (United Kingdom); Tsatis, Efstratios [8 Kotylaiou Street, Athens 11364 (Greece); Wrase, Timm [Stanford Institute for Theoretical Physics, Stanford University,Stanford, CA 94305 (United States)

    2014-05-19

    We study a number of (3+1)- and (2+1)-dimensional defect and boundary conformal field theories holographically dual to supergravity theories. In all cases the defects or boundaries are planar, and the defects are codimension-one. Using holography, we compute the entanglement entropy of a (hemi-)spherical region centered on the defect (boundary). We define defect and boundary entropies from the entanglement entropy by an appropriate background subtraction. For some (3+1)-dimensional theories we find evidence that the defect/boundary entropy changes monotonically under certain renormalization group flows triggered by operators localized at the defect or boundary. This provides evidence that the g-theorem of (1+1)-dimensional field theories generalizes to higher dimensions.

  4. On holographic defect entropy

    Science.gov (United States)

    Estes, John; Jensen, Kristan; O'Bannon, Andy; Tsatis, Efstratios; Wrase, Timm

    2014-05-01

    We study a number of (3 + 1)- and (2 + 1)-dimensional defect and boundary conformal field theories holographically dual to supergravity theories. In all cases the defects or boundaries are planar, and the defects are codimension-one. Using holography, we compute the entanglement entropy of a (hemi-)spherical region centered on the defect (boundary). We define defect and boundary entropies from the entanglement entropy by an appropriate background subtraction. For some (3 + 1)-dimensional theories we find evidence that the defect/boundary entropy changes monotonically under certain renormalization group flows triggered by operators localized at the defect or boundary. This provides evidence that the g-theorem of (1 + 1)-dimensional field theories generalizes to higher dimensions.

  5. Causality & holographic entanglement entropy

    Energy Technology Data Exchange (ETDEWEB)

    Headrick, Matthew [Martin Fisher School of Physics, Brandeis University, MS 057, 415 South Street, Waltham, MA 02454 (United States); Hubeny, Veronika E. [Centre for Particle Theory & Department of Mathematical Sciences,Science Laboratories, South Road, Durham DH1 3LE (United Kingdom); Lawrence, Albion [Martin Fisher School of Physics, Brandeis University, MS 057, 415 South Street, Waltham, MA 02454 (United States); Rangamani, Mukund [Centre for Particle Theory & Department of Mathematical Sciences,Science Laboratories, South Road, Durham DH1 3LE (United Kingdom)

    2014-12-29

    We identify conditions for the entanglement entropy as a function of spatial region to be compatible with causality in an arbitrary relativistic quantum field theory. We then prove that the covariant holographic entanglement entropy prescription (which relates entanglement entropy of a given spatial region on the boundary to the area of a certain extremal surface in the bulk) obeys these conditions, as long as the bulk obeys the null energy condition. While necessary for the validity of the prescription, this consistency requirement is quite nontrivial from the bulk standpoint, and therefore provides important additional evidence for the prescription. In the process, we introduce a codimension-zero bulk region, named the entanglement wedge, naturally associated with the given boundary spatial region. We propose that the entanglement wedge is the most natural bulk region corresponding to the boundary reduced density matrix.

  6. Holographic Vortex Coronagraph

    Science.gov (United States)

    Palacios, David

    2010-01-01

    A holographic vortex coronagraph (HVC) has been proposed as an improvement over conventional coronagraphs for use in high-contrast astronomical imaging for detecting planets, dust disks, and other broadband light scatterers in the vicinities of stars other than the Sun. Because such light scatterers are so faint relative to their parent stars, in order to be able to detect them, it is necessary to effect ultra-high-contrast (typically by a factor of the order of 1010) suppression of broadband light from the stars. Unfortunately, the performances of conventional coronagraphs are limited by low throughput, dispersion, and difficulty of satisfying challenging manufacturing requirements. The HVC concept offers the potential to overcome these limitations.

  7. Small Dielectric Spheres with High Refractive Index as New Multifunctional Elements for Optical Devices

    Science.gov (United States)

    Tribelsky, Michael I.; Geffrin, Jean-Michel; Litman, Amelie; Eyraud, Christelle; Moreno, Fernando

    2015-07-01

    The future of ultra-fast optical communication systems is inevitably connected with progress in optical circuits and nanoantennas. One of the key points of this progress is the creation of elementary components of optical devices with scattering diagrams tailored for redirecting the incident light in a desired manner. Here we demonstrate theoretically and experimentally that a small, simple, spatially homogeneous dielectric subwavelength sphere with a high refractive index and low losses (as some semiconductors in the visible or near infrared region) exhibits properties allowing to utilize it as a new multifunctional element for the mentioned devices. This can be achieved by taking advantage of the coherent effects between dipolar and multipolar modes, which produce anomalous scattering effects. The effects open a new way to control the directionality of the scattered light. The directional tuning can be obtained in a practical way just by a change in the frequency of the incident wave, and/or by a well-chosen diameter of the sphere. Dielectric nanoparticles with the required optical properties in the VIS-NIR may be now readily fabricated. These particles could be an efficient alternative to the widely discussed scattering units with a more complicated design.

  8. Prediction of metallic nano-optical trapping forces by finite element-boundary integral method.

    Science.gov (United States)

    Pan, Xiao-Min; Xu, Kai-Jiang; Yang, Ming-Lin; Sheng, Xin-Qing

    2015-03-09

    The hybrid of finite element and boundary integral (FE-BI) method is employed to predict nano-optical trapping forces of arbitrarily shaped metallic nanostructures. A preconditioning strategy is proposed to improve the convergence of the iterative solution. Skeletonization is employed to speed up the design and optimization where iteration has to be repeated for each beam configuration. The radiation pressure force (RPF) is computed by vector flux of the Maxwell's stress tensor. Numerical simulations are performed to validate the developed method in analyzing the plasmonic effects as well as the optical trapping forces. It is shown that the proposed method is capable of predicting the trapping forces of complex metallic nanostructures accurately and efficiently.

  9. Diffractive optical element with same diffraction pattern for multicolor light-emitting diodes.

    Science.gov (United States)

    Chen, Mengzhu; Wang, Qixia; Gu, Huarong; Tan, Qiaofeng

    2016-01-01

    The wavelength-division multiplexing technique can be utilized in visible light communication to increase the channel capacity when a multicolor mixed white LED is used as light source. In such an application, the illumination area of LEDs should be invariant to the incident wavelength, so as to decrease interference within the adjacent regions. Diffractive optical elements (DOEs) can be used in the optical transmitter system to shape the diffraction patterns into polygons. However, traditional DOEs illuminated by a multicolor mixed white LED would result into diffraction patterns with unequal sizes. In this paper, a hybrid algorithm which combines particle swarm optimization with a genetic algorithm is proposed for multicolor oriented DOEs design. A DOE is designed and fabricated for blue and red LEDs, and experimental results show that diffraction patterns with rather good uniformity as well as quasi-equal size for red and blue LEDs are obtained.

  10. Holographic Waveguided See-Through Display Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To address the NASA need for lightweight, space suit-mounted displays, Luminit proposes a novel Holographic Waveguided See-Through Display. Our proposed Holographic...

  11. 3D holographic printer: fast printing approach.

    Science.gov (United States)

    Morozov, Alexander V; Putilin, Andrey N; Kopenkin, Sergey S; Borodin, Yuriy P; Druzhin, Vladislav V; Dubynin, Sergey E; Dubinin, German B

    2014-02-10

    This article describes the general operation principles of devices for synthesized holographic images such as holographic printers. Special emphasis is placed on the printing speed. In addition, various methods to increase the printing process are described and compared.

  12. Multifunctional and multi-output plasmonic meta-elements for integrated optical circuits.

    Science.gov (United States)

    Wang, Jiayuan; Hu, Chuang; Zhang, Jiasen

    2014-09-22

    Based on a novel phase-sieve method by in-plane interference processes, a well-designed nonperiodic nanogroove array on gold surface is proposed as a multifunctional and multi-output plasmonic meta-element (MPM) for surface plasmon polariton waves. An MPM functions as a plasmonic lens (PL) as well as a plasmonic array illuminator (PAI), and another MPM acts as two PLs with an intersection angle of π/4 are fabricated and validated by leakage radiation microscopy measurements. Our proposed scheme with implemented functionalities could promote potential applications in high density integrated optical circuits.

  13. PDMS membranes as sensing element in optical sensors for gas detection in water

    Directory of Open Access Journals (Sweden)

    Stefania Torino

    2017-11-01

    Full Text Available Polydimethylsiloxane (PDMS has been introduced the first time about 20years ago. This polymer is worldwide used for the rapid prototyping of microfluidic device through a replica molding process. However, the great popularity of PDMS is not only related to its easy processability, but also to its chemical and physical properties. For its interesting properties, the polymer has been implied for several applications, including sensing. In this work, we investigated how to use functionalized PDMS membranes as sensing elements in optical sensors for gas detection in water samples. Keywords: Polydimethylsiloxane (PDMS, Surface Plasmon Resonance (SPR sensors, Gas sensor

  14. Micro-optical elements fabricated by metal-transparent-metallic-oxides grayscale photomasks.

    Science.gov (United States)

    Zhang, Jianming; Guo, Chuanfei; Wang, Yongsheng; Miao, Junjie; Tian, Ye; Liu, Qian

    2012-09-20

    One-step gray-tone lithography is the most effective approach to making three-dimensional (3D) micro-optical elements (MOEs). Metal-transparent-metallic-oxide (MTMO) grayscale masks are novel and quite cost effective. In this paper, through the successful fabrication of 3D SiO(2) MOEs by gray-tone lithography and reactive ion etching, we thoroughly investigate the practical technique needs of MTMO grayscale masks on metallic nanofilms. Design calibration, pattern transfer, resolution, lifetime, and mask protection of grayscale masks have been verified. This work shows that the MTMO grayscale photomask has good practical applicability in the laboratory and in industry.

  15. Design of IP-based element management system for SDH optical network

    Science.gov (United States)

    Chen, Junqiang; Zhang, Feng

    2004-04-01

    As large amount of SDH optical systems are deployed in metropolitan area network (MAN) and access network, the scale and complexity of SDH management network is increasing dramatically. It is a very challenging task to design a robust and effective element management system (EMS) for large-scale SDH network. As well known, OSI's network architecture has been adopted in traditional SDH network management system for a long time. But it has been proved that OSI stack has many limits, such as complexity of implementation, high resource consumption and low efficiency. This paper presents a method different from that of OSI to build SDH management network. The presented method is based on lightweight IP stack and layered routing scheme of OSPF. By this method, the number of network elements of the managed SDH network can be increased remarkably without loss of management performance. Analysis of other merits of this method is also given. The implementation of EMS based on this method is introduced.

  16. Data veracity checks for the alignment of the JWST optical telescope element

    Science.gov (United States)

    Levi, Josh; Glassman, Tiffany; Farey, Mike; Liepmann, Till

    2016-09-01

    Alignment of the James Webb Space Telescope (JWST) Optical Telescope Element (OTE) requires a multitude of demanding and exacting dimensional and positional measurements. Many of the alignment requirements are in the range of hundreds of microns over significant distances (up to 8 m) on a flexible structure, which creates stringent accuracy demands on the alignment measurements. Furthermore, to optimize the performance of the system, the telescope is aligned to a relatively small (analytical tools and processes that allow us to test the data veracity in near real time using, for example, Excel spreadsheet calculations. These tools combine measurements made at various levels of assembly, measurements of cross check points, and finite element analysis to determine the correlated and uncorrelated discrepancies in the measured data. This provides a detailed understanding of systematic and random measurement errors and has allowed us to quickly uncover issues with placement, measurement, and modeling, as well as to quantify our measurement performance.

  17. Structural Health Monitoring Using High-Density Fiber Optic Strain Sensor and Inverse Finite Element Methods

    Science.gov (United States)

    Vazquez, Sixto L.; Tessler, Alexander; Quach, Cuong C.; Cooper, Eric G.; Parks, Jeffrey; Spangler, Jan L.

    2005-01-01

    In an effort to mitigate accidents due to system and component failure, NASA s Aviation Safety has partnered with industry, academia, and other governmental organizations to develop real-time, on-board monitoring capabilities and system performance models for early detection of airframe structure degradation. NASA Langley is investigating a structural health monitoring capability that uses a distributed fiber optic strain system and an inverse finite element method for measuring and modeling structural deformations. This report describes the constituent systems that enable this structural monitoring function and discusses results from laboratory tests using the fiber strain sensor system and the inverse finite element method to demonstrate structural deformation estimation on an instrumented test article

  18. Structural Anomaly Detection Using Fiber Optic Sensors and Inverse Finite Element Method

    Science.gov (United States)

    Quach, Cuong C.; Vazquez, Sixto L.; Tessler, Alex; Moore, Jason P.; Cooper, Eric G.; Spangler, Jan. L.

    2005-01-01

    NASA Langley Research Center is investigating a variety of techniques for mitigating aircraft accidents due to structural component failure. One technique under consideration combines distributed fiber optic strain sensing with an inverse finite element method for detecting and characterizing structural anomalies anomalies that may provide early indication of airframe structure degradation. The technique identifies structural anomalies that result in observable changes in localized strain but do not impact the overall surface shape. Surface shape information is provided by an Inverse Finite Element Method that computes full-field displacements and internal loads using strain data from in-situ fiberoptic sensors. This paper describes a prototype of such a system and reports results from a series of laboratory tests conducted on a test coupon subjected to increasing levels of damage.

  19. The Open Cluster Chemical Abundances and Mapping (OCCAM) Survey: Optical Extension for Neutron Capture Elements

    Science.gov (United States)

    Melendez, Matthew; O'Connell, Julia; Frinchaboy, Peter M.; Donor, John; Cunha, Katia M. L.; Shetrone, Matthew D.; Majewski, Steven R.; Zasowski, Gail; Pinsonneault, Marc H.; Roman-Lopes, Alexandre; Stassun, Keivan G.; APOGEE Team

    2017-01-01

    The Open Cluster Chemical Abundance & Mapping (OCCAM) survey is a systematic survey of Galactic open clusters using data primarily from the SDSS-III/APOGEE-1 survey. However, neutron capture elements are very limited in the IR region covered by APOGEE. In an effort to fully study detailed Galactic chemical evolution, we are conducting a high resolution (R~60,000) spectroscopic abundance analysis of neutron capture elements for OCCAM clusters in the optical regime to complement the APOGEE results. As part of this effort, we present Ba II, La II, Ce II and Eu II results for a few open clusters without previous abundance measurements using data obtained at McDonald Observatory with the 2.1m Otto Struve telescope and Sandiford Echelle Spectrograph.This work is supported by an NSF AAG grant AST-1311835.

  20. Computational optical palpation: micro-scale force mapping using finite-element methods (Conference Presentation)

    Science.gov (United States)

    Wijesinghe, Philip; Sampson, David D.; Kennedy, Brendan F.

    2016-03-01

    Accurate quantification of forces, applied to, or generated by, tissue, is key to understanding many biomechanical processes, fabricating engineered tissues, and diagnosing diseases. Many techniques have been employed to measure forces; in particular, tactile imaging - developed to spatially map palpation-mimicking forces - has shown potential in improving the diagnosis of cancer on the macro-scale. However, tactile imaging often involves the use of discrete force sensors, such as capacitive or piezoelectric sensors, whose spatial resolution is often limited to 1-2 mm. Our group has previously presented a type of tactile imaging, termed optical palpation, in which the change in thickness of a compliant layer in contact with tissue is measured using optical coherence tomography, and surface forces are extracted, with a micro-scale spatial resolution, using a one-dimensional spring model. We have also recently combined optical palpation with compression optical coherence elastography (OCE) to quantify stiffness. A main limitation of this work, however, is that a one-dimensional spring model is insufficient in describing the deformation of mechanically heterogeneous tissue with uneven boundaries, generating significant inaccuracies in measured forces. Here, we present a computational, finite-element method, which we term computational optical palpation. In this technique, by knowing the non-linear mechanical properties of the layer, and from only the axial component of displacement measured by phase-sensitive OCE, we can estimate, not only the axial forces, but the three-dimensional traction forces at the layer-tissue interface. We use a non-linear, three-dimensional model of deformation, which greatly increases the ability to accurately measure force and stiffness in complex tissues.

  1. Holographic superconductor on Q-lattice

    Energy Technology Data Exchange (ETDEWEB)

    Ling, Yi [Institute of High Energy Physics, Chinese Academy of Sciences,Beijing, 100049 (China); State Key Laboratory of Theoretical Physics, Institute of Theoretical Physics,Chinese Academy of Sciences, Beijing, 100190 (China); Liu, Peng; Niu, Chao [Institute of High Energy Physics, Chinese Academy of Sciences,Beijing, 100049 (China); Wu, Jian-Pin [Department of Physics, School of Mathematics and Physics, Bohai University,Jinzhou, 121013 (China); State Key Laboratory of Theoretical Physics, Institute of Theoretical Physics,Chinese Academy of Sciences, Beijing, 100190 (China); Xian, Zhuo-Yu [Institute of High Energy Physics, Chinese Academy of Sciences,Beijing, 100049 (China)

    2015-02-10

    We construct the simplest gravitational dual model of a superconductor on Q-lattices. We analyze the condition for the existence of a critical temperature at which the charged scalar field will condense. In contrast to the holographic superconductor on ionic lattices, the presence of Q-lattices will suppress the condensate of the scalar field and lower the critical temperature. In particular, when the Q-lattice background is dual to a deep insulating phase, the condensation would never occur for some small charges. Furthermore, we numerically compute the optical conductivity in the superconducting regime. It turns out that the presence of Q-lattice does not remove the pole in the imaginary part of the conductivity, ensuring the appearance of a delta function in the real part. We also evaluate the gap which in general depends on the charge of the scalar field as well as the Q-lattice parameters. Nevertheless, when the charge of the scalar field is relatively large and approaches the probe limit, the gap becomes universal with ω{sub g}≃9T{sub c} which is consistent with the result for conventional holographic superconductors.

  2. Noncontact holographic detection for photoacoustic tomography

    Science.gov (United States)

    Buj, Christian; Münter, Michael; Schmarbeck, Benedikt; Horstmann, Jens; Hüttmann, Gereon; Brinkmann, Ralf

    2017-10-01

    A holographic method for high-speed, noncontact photoacoustic tomography is introduced and evaluated. Relative changes of the object's topography, induced by the impact of thermoelastic pressure waves, were determined at nanometer sensitivity without physical contact. The object's surface was illuminated with nanosecond laser pulses and imaged with a high-speed CMOS camera. From two interferograms measured before and after excitation of the acoustic wave, surface displacement was calculated and then used as the basis for a tomographic reconstruction of the initial pressure caused by optical absorption. The holographic detection scheme enables variable sampling rates of the photoacoustic signal of up to 50 MHz. The total acquisition times for complete volumes with 230 MVoxel is far below 1 s. Measurements of silicone and porcine skin tissue phantoms with embedded artificial absorbers, which served as a model for human subcutaneous vascular networks, were possible. Three-dimensional reconstructions of the absorbing structures show details with a diameter of 310 μm up to a depth of 2.5 mm. Theoretical limitations and the experimental sensitivity, as well as the potential for in vivo imaging depending on the detection repetition rate, are analyzed and discussed.

  3. Theoretical analysis and estimation of decorrelation phase error in digital holographic interferometry

    Science.gov (United States)

    Zhang, Tao; Yan, Yining; Mo, Qingkai

    2016-10-01

    In order to theoretically analyze and estimate decorrelation phase error in digital holographic interferometry, the principle of digital holographic imaging system is introduced in this paper, and general point spread function (PSF) of digital holographic system is derived and its approximate function is obtained. According to the characteristics of the digital holographic imaging in accordance with the laws of statistical optics, the expression of complex amplitude standard deviation of σA, σB and σC in each region of the double exposure time and the relationship between the degree of decorrelation are derived, and the expression of the phase error of decorrelation is given. It is simulated in MATLAB, simulative results indicate that statistical properties of decorrelation phase error obtained through theory analysis correspond to decorrelation phenomenon. And the measuring condition, in digital holography interferometry, which decorrelation degrees between the holographies of every double exposure should satisfy ρx + ρy <0.1, is derived.

  4. Holographic View of the Brain Memory Mechanism Based on Evanescent Superluminal Photons

    Directory of Open Access Journals (Sweden)

    Takaaki Musha

    2012-08-01

    Full Text Available D. Pollen and M. Trachtenberg proposed the holographic brain theory to help explain the existence of photographic memories in some people. They suggested that such individuals had more vivid memories because they somehow could access a very large region of their memory holograms. Hameroff suggested in his paper that cylindrical neuronal microtubule cavities, or centrioles, function as waveguides for the evanescent photons for quantum signal processing. The supposition is that microtubular structures of the brain function as a coherent fiber bundle set used to store holographic images, as would a fiber-optic holographic system. In this paper, the author proposes that superluminal photons propagating inside the microtubules via evanescent waves could provide the access needed to record or retrieve a quantum coherent entangled holographic memory.

  5. Multi-channel holographic birfurcative neural network system for real-time adaptive EOS data analysis

    Science.gov (United States)

    Liu, Hua-Kuang; Diep, J.; Huang, K.

    1991-01-01

    Viewgraphs on multi-channel holographic bifurcative neural network system for real-time adaptive Earth Observing System (EOS) data analysis are presented. The objective is to research and develop an optical bifurcating neuromorphic pattern recognition system for making optical data array comparisons and to evaluate the use of the system for EOS data classification, reduction, analysis, and other applications.

  6. Concealed holographic coding for security applications by using a moire technique

    DEFF Research Database (Denmark)

    Zhang, Xiangsu; Dalsgaard, Erik

    1997-01-01

    We present an optical coding technique that enhances the anticounterfeiting power of security holograms. The principles of the technique is based on the moire phenomenon. The code in the hologram has a phase pattern that is invisible and cannot be detected by optical equipment, so that imitation...... is extremely difficult. Holographic, photographic and embossing technique are used in fabricating coded holograms and decoders....

  7. A novel automotive headlight system based on digital micro-mirror devices and diffractive optical elements

    Science.gov (United States)

    Su, Ping; Song, Yuming; Ma, Jianshe

    2018-01-01

    The DMD (Digital Micro-mirror Device) has the advantages of high refresh rate and high diffraction efficiency, and these make it become an ideal loader of multiple modes illumination. DOEs (Diffractive Optical Element) have the advantages of high degree of freedom, light weight, easy to copy, low cost etc., and can be used to reduce the weight, complexity, cost of optical system. A novel automotive headlamp system using DMD as the light distribution element and a DOE as the light field modulation device is proposed in this paper. The pure phase DOE is obtained by the GS algorithm using Rayleigh-Sommerfeld diffraction integral model. Based on the standard automotive headlamp light intensity distribution in the target plane, the amplitude distribution of DMD is obtained by numerical simulation, and the grayscale diagram loaded on the DMD can be obtained accordingly. Finally, according to simulation result, the light intensity distribution in the target plane is proportional to the national standard, hence verifies the validity of the novel system. The novel illumination system proposed in this paper provides a reliable hardware platform for the intelligent headlamps.

  8. Digital Holographic Memories

    Science.gov (United States)

    Hesselink, Lambertus; Orlov, Sergei S.

    Optical data storage is a phenomenal success story. Since its introduction in the early 1980s, optical data storage devices have evolved from being focused primarily on music distribution, to becoming the prevailing data distribution and recording medium. Each year, billions of optical recordable and prerecorded disks are sold worldwide. Almost every computer today is shipped with a CD or DVD drive installed.

  9. Holographic framework for eternal inflation

    Science.gov (United States)

    Freivogel, Ben; Sekino, Yasuhiro; Susskind, Leonard; Yeh, Chen-Pin

    2006-10-01

    In this paper we provide some circumstantial evidence for a holographic duality between bubble nucleation in an eternally inflating universe and a Euclidean conformal field theory (CFT). The holographic correspondence (which is different than Strominger’s de Sitter (dS)/CFT duality) relates the decay of (3+1)-dimensional de Sitter space to a two-dimensional CFT. It is not associated with pure de Sitter space, but rather with Coleman-De Luccia bubble nucleation. Alternatively, it can be thought of as a holographic description of the open, infinite, Friedmann-Robertson-Walker (FRW) cosmology that results from such a bubble. The conjectured holographic representation is of a new type that combines holography with the Wheeler-DeWitt formalism to produce a Wheeler-DeWitt theory that lives on the spatial boundary of a k=-1 FRW cosmology. We also argue for a more ambitious interpretation of the Wheeler-DeWitt CFT as a holographic dual of the entire Landscape.

  10. Diffractive optics in large sizes: computer-generated holograms (CGH) based on Bayfol HX photopolymer

    Science.gov (United States)

    Bruder, Friedrich-Karl; Fäcke, Thomas; Hagen, Rainer; Hönel, Dennis; Kleinschmidt, Tim Patrick; Orselli, Enrico; Rewitz, Christian; Rölle, Thomas; Walze, Günther

    2015-03-01

    Volume Holographic Optical Elements (vHOE) offer angular and spectral Bragg selectivity that can be tuned by film thickness and holographic recording conditions. With the option to integrate complex optical function in a very thin plastic layer formerly heavy refractive optics can be made thin and lightweight especially for large area applications like liquid crystal displays, projection screens or photovoltaic. Additionally their Bragg selectivity enables the integration of several completely separated optical functions in the same film. The new instant developing photopolymer film (Bayfol® HX) paves the way towards new cost effective diffractive large optics, due to its easy holographic recording and environmental stability. A major bottleneck for large area applications has been the master hologram recording which traditionally needs expensive, large high precision optical equipment and high power laser with long coherence length. Further the recording setup needs to be rearranged for a change in optical design. In this paper we describe an alternative method for large area holographic master recording, using standard optics and low power lasers in combination with an x, y-translation stage. In this setup small sub-holograms generated by a phase only spatial light modulator (SLM) are recorded next to each other to generate a large size vHOE. The setup is flexible to generate various types of HOEs without the need of a change in the mechanical and optical construction by convenient SLM programming. One Application example and parameter studies for printed vHOEs based on Bayfol® HX Photopolymer will be given.

  11. 3D micro-optical elements for generation of tightly focused vortex beams

    Directory of Open Access Journals (Sweden)

    Balčytis Armandas

    2015-01-01

    Full Text Available Orbital angular momentum carrying light beams are usedfor optical trapping and manipulation. This emerging trend provides new challenges involving device miniaturization for improved performance and enhanced functionality at the microscale. Here we discus a new fabrication method based on combining the additive 3D structuring capability laser photopolymerization and the substractive sub-wavelength resolution patterning of focused ion beam lithography to produce micro-optical elements capable of compound functionality. As a case in point of this approach binary spiral zone pattern based high numerical aperture micro-lenses capable of generating topological charge carrying tightly focused vortex beams in a single wavefront transformation step are presented. The devices were modelled using finite-difference time-domain simulations, and the theoretical predictions were verified by optically characterizing the propagation properties of light transmitted through the fabricated structures. The resulting devices had focal lengths close to the predicted values of f = 18 µm and f = 13 µm as well as topological charge ℓ dependent vortex focal spot sizes of ~ 1:3 µm and ~ 2:0 µm for ℓ = 1 and ℓ = 2 respectively.

  12. Extended volume and surface scatterometer for optical characterization of 3D-printed elements

    Science.gov (United States)

    Dannenberg, Florian; Uebeler, Denise; Weiß, Jürgen; Pescoller, Lukas; Weyer, Cornelia; Hahlweg, Cornelius

    2015-09-01

    The use of 3d printing technology seems to be a promising way for low cost prototyping, not only of mechanical, but also of optical components or systems. It is especially useful in applications where customized equipment repeatedly is subject to immediate destruction, as in experimental detonics and the like. Due to the nature of the 3D-printing process, there is a certain inner texture and therefore inhomogeneous optical behaviour to be taken into account, which also indicates mechanical anisotropy. Recent investigations are dedicated to quantification of optical properties of such printed bodies and derivation of corresponding optimization strategies for the printing process. Beside mounting, alignment and illumination means, also refractive and reflective elements are subject to investigation. The proposed measurement methods are based on an imaging nearfield scatterometer for combined volume and surface scatter measurements as proposed in previous papers. In continuation of last year's paper on the use of near field imaging, which basically is a reflective shadowgraph method, for characterization of glossy surfaces like printed matter or laminated material, further developments are discussed. The device has been extended for observation of photoelasticity effects and therefore homogeneity of polarization behaviour. A refined experimental set-up is introduced. Variation of plane of focus and incident angle are used for separation of various the images of the layers of the surface under test, cross and parallel polarization techniques are applied. Practical examples from current research studies are included.

  13. Adaptive finite element methods for the solution of inverse problems in optical tomography

    Science.gov (United States)

    Bangerth, Wolfgang; Joshi, Amit

    2008-06-01

    Optical tomography attempts to determine a spatially variable coefficient in the interior of a body from measurements of light fluxes at the boundary. Like in many other applications in biomedical imaging, computing solutions in optical tomography is complicated by the fact that one wants to identify an unknown number of relatively small irregularities in this coefficient at unknown locations, for example corresponding to the presence of tumors. To recover them at the resolution needed in clinical practice, one has to use meshes that, if uniformly fine, would lead to intractably large problems with hundreds of millions of unknowns. Adaptive meshes are therefore an indispensable tool. In this paper, we will describe a framework for the adaptive finite element solution of optical tomography problems. It takes into account all steps starting from the formulation of the problem including constraints on the coefficient, outer Newton-type nonlinear and inner linear iterations, regularization, and in particular the interplay of these algorithms with discretizing the problem on a sequence of adaptively refined meshes. We will demonstrate the efficiency and accuracy of these algorithms on a set of numerical examples of clinical relevance related to locating lymph nodes in tumor diagnosis.

  14. On holographic entanglement density

    Science.gov (United States)

    Gushterov, Nikola I.; O'Bannon, Andy; Rodgers, Ronnie

    2017-10-01

    We use holographic duality to study the entanglement entropy (EE) of Conformal Field Theories (CFTs) in various spacetime dimensions d, in the presence of various deformations: a relevant Lorentz scalar operator with constant source, a temperature T , a chemical potential μ, a marginal Lorentz scalar operator with source linear in a spatial coordinate, and a circle-compactified spatial direction. We consider EE between a strip or sphere sub-region and the rest of the system, and define the "entanglement density" (ED) as the change in EE due to the deformation, divided by the sub-region's volume. Using the deformed CFTs above, we show how the ED's dependence on the strip width or sphere radius, L, is useful for characterizing states of matter. For example, the ED's small- L behavior is determined either by the dimension of the perturbing operator or by the first law of EE. For Lorentz-invariant renormalization group (RG) flows between CFTs, the "area theorem" states that the coefficient of the EE's area law term must be larger in the UV than in the IR. In these cases the ED must therefore approach zero from below as L→∞. However, when Lorentz symmetry is broken and the IR fixed point has different scaling from the UV, we find that the ED often approaches the thermal entropy density from above, indicating area theorem violation.

  15. Advances with holographic DESA emulsions

    Science.gov (United States)

    Dünkel, Lothar; Eichler, Jürgen; Schneeweiss, Claudia; Ackermann, Gerhard

    2006-02-01

    DESA emulsions represent layer systems based on ultra-fine grained silver halide (AgX) technology. The new layers have an excellent performance for holographic application. The technology has been presented repeatedly in recent years, including the emulsion characterization and topics of chemical and spectral sensitization. The paper gives a survey of actual results referring to panchromatic sensitization and other improvements like the application of silver halide sensitized gelatine (SHSG) procedure. These results are embedded into intensive collaborations with small and medium enterprises (SME's) to commercialize DESA layers. Predominant goals are innovative products with holographic components and layers providing as well as cost effectiveness and high quality.

  16. Holographic superconductivity from higher derivative theory

    Science.gov (United States)

    Wu, Jian-Pin; Liu, Peng

    2017-11-01

    We construct a 6 derivative holographic superconductor model in the 4-dimensional bulk spacetimes, in which the normal state describes a quantum critical (QC) phase. The phase diagram (γ1 ,Tˆc) and the condensation as the function of temperature are worked out numerically. We observe that with the decrease of the coupling parameter γ1, the critical temperature Tˆc decreases and the formation of charged scalar hair becomes harder. We also calculate the optical conductivity. An appealing characteristic is a wider extension of the superconducting energy gap, comparing with that of 4 derivative theory. It is expected that this phenomena can be observed in the real materials of high temperature superconductor. Also the Homes' law in our present models with 4 and 6 derivative corrections is explored. We find that in certain range of parameters γ and γ1, the experimentally measured value of the universal constant C in Homes' law can be obtained.

  17. Collinear technology for a holographic versatile disk

    Science.gov (United States)

    Horimai, Hideyoshi; Tan, Xiaodi

    2006-02-01

    A novel reading and writing technology for a holographic versatile disk (HVD) system called collinear technology is developed. With this method a two-dimensional data page can be recorded as volumetric holograms generated by a reference beam and a signal beam that are bundled on the same axis and that are irradiated on the recording medium through a single objective lens. The multiplex recording and reconstruction process is demonstrated, and it is shown that the optical configuration and the dichroic medium disk structure are suitable for a compact system. With the HVD's special structure, the system can use a servo to focus, track, and locate the reading and writing addresses. A unique selectable-capacity recording format of a HVD and its standardization activity are also introduced. This method will enable us to construct a small HVD system with CD and DVD upper compatibilities.

  18. Holographic superconductivity from higher derivative theory

    Directory of Open Access Journals (Sweden)

    Jian-Pin Wu

    2017-11-01

    Full Text Available We construct a 6 derivative holographic superconductor model in the 4-dimensional bulk spacetimes, in which the normal state describes a quantum critical (QC phase. The phase diagram (γ1,Tˆc and the condensation as the function of temperature are worked out numerically. We observe that with the decrease of the coupling parameter γ1, the critical temperature Tˆc decreases and the formation of charged scalar hair becomes harder. We also calculate the optical conductivity. An appealing characteristic is a wider extension of the superconducting energy gap, comparing with that of 4 derivative theory. It is expected that this phenomena can be observed in the real materials of high temperature superconductor. Also the Homes' law in our present models with 4 and 6 derivative corrections is explored. We find that in certain range of parameters γ and γ1, the experimentally measured value of the universal constant C in Homes' law can be obtained.

  19. Holographic investigations of azobenzene-containing low-molecular-weight compounds in pure materials and binary blends with polystyrene.

    Science.gov (United States)

    Audorff, Hubert; Walker, Roland; Kador, Lothar; Schmidt, Hans-Werner

    2011-11-04

    This paper reports on the synthesis and the thermal and optical properties of photochromic low-molecular-weight compounds, especially with respect to the formation of holographic volume gratings in the pure materials and in binary blends with polystyrene. Its aim is to provide a basic understanding of the holographic response with regard to the molecular structure, and thus to show a way to obtain suitable rewritable materials with high sensitivity for holographic data storage. The photoactive low-molecular-weight compounds consist of a central core with three or four azobenzene-based arms attached through esterification. Four different cores were investigated that influence the glass transition temperature and the glass-forming properties. Additional structural variations were introduced by the polar terminal substituent at the azobenzene chromophore to fine-tune the optical properties and the holographic response. Films of the neat compounds were investigated in holographic experiments, especially with regard to the material sensitivity. In binary blends of the low-molecular-weight compounds with polystyrene, the influence of a polymer matrix on the behavior in holographic experiments was studied. The most promising material combination was also investigated at elevated temperatures, at which the holographic recording sensitivity is even higher. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Evaluation method of an influence of wavefront aberration on signal quality in holographic memory

    Science.gov (United States)

    Akieda, Kensuke; Nakajima, Akihito; Ohori, Tomohiro; Katakura, Kiyoto; Yamamoto, Manabu

    2010-11-01

    One of the problems that affects the practical use of holographic memory is deterioration of the reproduced images due to aberration in the optical system. The medium used in holographic memory systems must be interchangeable, and hence, it is necessary to clarify the influence of aberration in the optical system on the signal quality and perform aberration correction for drive compatibility. In this study, aberration is introduced in the reference light beam during image reproduction, and the deterioration of the reproduced image signal is examined.

  1. Self-error-rejecting photonic qubit transmission in polarization-spatial modes with linear optical elements

    Science.gov (United States)

    Jiang, YuXiao; Guo, PengLiang; Gao, ChengYan; Wang, HaiBo; Alzahrani, Faris; Hobiny, Aatef; Deng, FuGuo

    2017-12-01

    We present an original self-error-rejecting photonic qubit transmission scheme for both the polarization and spatial states of photon systems transmitted over collective noise channels. In our scheme, we use simple linear-optical elements, including half-wave plates, 50:50 beam splitters, and polarization beam splitters, to convert spatial-polarization modes into different time bins. By using postselection in different time bins, the success probability of obtaining the uncorrupted states approaches 1/4 for single-photon transmission, which is not influenced by the coefficients of noisy channels. Our self-error-rejecting transmission scheme can be generalized to hyperentangled n-photon systems and is useful in practical high-capacity quantum communications with photon systems in two degrees of freedom.

  2. Broadband beam shaping using two cascaded diffractive optical elements with different sizes of effective phase region

    Science.gov (United States)

    Ding, Li; Cao, Guowei; Guo, Jin; Wang, Jun; Huang, Kun; Li, Yongping; Kang, Xueliang; Wang, Liang

    2017-10-01

    A unique design method of two cascaded diffractive optical elements (DOEs) with different sizes of effective phase region to modulate broadband beam is presented with consideration of single production material and low relief height on DOE. The iterative algorithm to calculate the relief heights on these DOEs is introduced at first. Where after, a broadband beam at wavelength from 500nm to 600nm propagates through the designed DOEs and is focused on the target plane in the simulation part. The shaping results demonstrate the excellent shaping ability of this unique design method. The shaping system proposed in this paper is significant for nonmonochromatic light modulation and has many applications such as graphic encryption, three-dimensional color display and multi wavelength division multiplexing.

  3. Transient magnetized plasma as an optical element for high power laser pulses

    Directory of Open Access Journals (Sweden)

    Nobuhiko Nakanii

    2015-02-01

    Full Text Available Underdense plasma produced in gas jets by low intensity laser prepulses in the presence of a static magnetic field, B∼0.3  T, is shown experimentally to become an optical element allowing steering of tightly focused high power femtosecond laser pulses within several degrees along with essential enhancement of pulse’s focusability. Strong laser prepulses form a density ramp perpendicularly to magnetic field direction and, owing to the light refraction, main laser pulses propagate along the magnetic field even if it is tilted from the laser axis. Electrons generated in the laser pulse wake are well collimated and follow in the direction of the magnetic field; their characteristics are measured to be not sensitive to the tilt of magnetic field up to angles ±5°.

  4. A 45-element continuous facesheet surface micromachined deformable mirror for optical aberration correction

    Directory of Open Access Journals (Sweden)

    Weimin Wang

    2014-02-01

    Full Text Available A 45-element continuous facesheet surface micromachined deformable mirror (DM is presented and is fabricated using the PolyMUMPs multi-user micro-electro-mechanical system processes. The effects of the structural parameters on the characteristics of the DM, such as its stroke, frequency and actuator coupling, are analyzed. In addition, the DM design has also been verified through experimental testing. This DM prototype has a surface figure of 0.5 μm and a fill factor of 95%. The DM can provide a 0.6 μm stroke with 5.9% actuator coupling. A static aberration correction based on this DM is also demonstrated, which acts as a reference for the potential adaptive optics (AO applications of the device.

  5. Genetic Local Search Algorithm for Optimization Design of Diffractive Optical Elements

    Science.gov (United States)

    Zhou, Guangya; Chen, Yixin; Wang, Zongguang; Song, Hongwei

    1999-07-01

    We propose a genetic local search algorithm (GLSA) for the optimization design of diffractive optical elements (DOE s). This hybrid algorithm incorporates advantages of both genetic algorithm (GA) and local search techniques. It appears better able to locate the global minimum compared with a canonical GA. Sample cases investigated here include the optimization design of binary-phase Dammann gratings, continuous surface-relief grating array generators, and a uniform top-hat focal plane intensity profile generator. Two GLSA s whose incorporated local search techniques are the hill-climbing method and the simulated annealing algorithm are investigated. Numerical experimental results demonstrate that the proposed algorithm is highly efficient and robust. DOE s that have high diffraction efficiency and excellent uniformity can be achieved by use of the algorithm we propose.

  6. Optical Properties and Surface Morphology of Zinc Telluride Thin Films Prepared by Stacked Elemental Layer Method

    Directory of Open Access Journals (Sweden)

    Subramani SHANMUGAN

    2012-06-01

    Full Text Available ZnTe thin films were prepared by Stacking of elemental (Zn and Te layers (SEL followed by inert gas annealing. The optical parameters were calculated from the transmission spectra. The bandgap of the annealed samples was found between 1.95 eV and 2.06 eV. The change in film thickness after annealing was observed using cross sectional SEM image of the annealed samples. The surface morphology of the annealed Te/Zn stack was also analyzed and observed as very smooth, compact and dense surface. The prepared film was Zn rich evidenced by EDAX. The observed result encourages in pursuing the SEL method for the preparation of compound semiconductor from II-VI group materials.DOI: http://dx.doi.org/10.5755/j01.ms.18.2.1908

  7. Single-element elliptical hard x-ray micro-optics.

    Science.gov (United States)

    Evans-Lutterodt, Kenneth; Ablett, James; Stein, Aaron; Kao, Chi-Chang; Tennant, Don; Klemens, Fred; Taylor, Ashley; Jacobsen, Chris; Gammel, Peter; Huggins, Harold; Bogart, Greg; Ustin, Scott; Ocola, Leo

    2003-04-21

    Using micro-fabrication techniques, we have manufactured a single element kinoform lens in single-crystal silicon with an elliptical profile for 12.398 keV (1A) x-rays. By fabricating a lens that is optimized at fixed wavelengths, absorption in the lens material can be significantly reduced by removing 2_ phase-shifting regions. This permits short focal length devices to be fabricated with small radii of curvatures at the lens apex. This feature allows one to obtain a high demagnification of a finite synchrotron electron source size. The reduced absorption loss also enables optics with a larger aperture, and hence improved resolution for focusing and imaging applications. Our first trial of these lenses has resulted in a one micron line focus (fwhm) at the National Synchrotron Light Source X13B beamline.

  8. Beam shaping for multicolour light-emitting diodes with diffractive optical elements

    KAUST Repository

    Yu, Chao

    2016-10-06

    An improved particle swarm optimization method is proposed for the design of ultra-thin diffractive optical elements (DOEs) enabling multicolour beam shaping functionality. We employ pre-optimized initial structures and adaptive weight strategy in the algorithm to achieve better and identical shaping performance for multiple colours. Accordingly, a DOE for shaping light from green and blue LEDs has been designed and fabricated. Both experiment and numerical simulations have been conducted and the results agree well with each other. 15.66% average root mean square error (RMSE) and 0.22% RMSE difference are achieved. In addition, the parameters closely related to the performance of the optimization are analysed, which can provide insights for future application designs.

  9. Understanding the holographic principle via RG flow

    CERN Document Server

    Mukhopadhyay, Ayan

    2016-01-01

    This is a review of some recent works which demonstrate how the classical equations of gravity in AdS themselves hold the key to understanding their holographic origin in the form of a strongly coupled large $N$ QFT whose algebra of local operators can be generated by a few (single-trace) elements. I discuss how this can be realised by reformulating Einstein's equations in AdS in the form of a non-perturbative RG flow that further leads to a new approach towards constructing strongly interacting QFTs. In particular, the RG flow can self-determine the UV data that are otherwise obtained by solving classical gravity equations and demanding that the solutions do not have naked singularities. For a concrete demonstration, I focus on the hydrodynamic limit in which case this RG flow connects the AdS/CFT correspondence with the membrane paradigm, and also reproduces the known values of the dual QFT transport coefficients.

  10. Experimental holographic movie IV: the projection-type display system using a retro-directive screen

    Science.gov (United States)

    Higuchi, Kazuhito; Ishii, Ken'ichiro; Ishikawa, Jun; Hiyama, Shigeo

    1995-04-01

    Holographic movies can be seen as a tool to estimate the picture quality of moving holographic images as a step towards holographic television. The authors have previously developed three versions of an experimental holographic movie system, and this paper is a report on an improved version 4 of the system. The new version features a newly-developed projection-type display with a retro-directive beaded-screen, and an automatic film driver unit which moves perforated 35 mm holographic film intermittently with a shutter. A twin diamond-shaped hologram format, which was developed in the earlier version 2, is adopted for the films. The films comprise a series of reconstructed moving holographic images with minimal blurring. The optical arrangement and structure of the version 4 system enable the viewers to watch the film images in an open space, which in turn relieves them of the psychological pressure they felt with the previous three versions, when they had to squint into a narrow window built into a wall on the side of the device.

  11. Ray-leakage-free planar solar concentrator featuring achromatic hybrid collectors and innovative secondary optical elements

    Science.gov (United States)

    Yin, Peng; Xu, Xiping; Jiang, Zhaoguo

    2017-11-01

    For high concentration ratio of the planar concentrator which is mainly used for photovoltaic or solar-thermal applications, the ray-leakage must be prevented during rays propagated in the lightguide. In this paper, the design of a ray-leakage-free planar solar concentrator is introduced with achromatic hybrid collectors and innovative secondary optical elements. The distance between two columns of dimple structures is larger because the collector width is irrelevant to the collector length, which prompts the ray-leakage-free propagating length can be raised greatly. Put differently, the proposed concentrator can obtain a high geometrical concentration ratio while achieving a high optical efficiency. To increase the ray-leakage-free propagating distance, a mathematical model between ray-leakage-free propagating length and the corresponding parameters is established, where the corresponding parameters include the parabola coefficient, the width of collector, the concentrator height and the small expanding angle of the dimple structure. Numerical results display that more than 5000x geometrical concentration ratio of the proposed concentrator is achieved without any leakage from the lightguide.

  12. Collinear technology for holographic versatile disc (HVD) system

    Science.gov (United States)

    Tan, Xiaodi; Horimai, Hideyoshi; Shimura, Tsutomu; Ichimura, Shotaro; Fujimura, Ryushi; Kuroda, Kazuo

    2006-09-01

    Holographic Versatile Disc (HVD TM) using Collinear TM Technologies is proposed by OPTWARE Corporation, in which the information and reference beams are displayed co-axially by the same SLM. With this unique configuration the optical pickup can be designed as small as the DVD's, and can be placed on one side of the recording disc. In HVD TM structure, the pre-formatted meta-data reflective layer is used for the focus/tracking servo and reading address information, and the dichroic mirror layer is used for detecting holographic recording information without interfering with the preformatted information. A 2-dimensional digital page data format is used and the shift-multiplexing method is employed to increased recording density of HVD TM. Experimental and theoretical studies suggest that the holographic material is very effective to increased recording density of the system. As the servo technology is being introduced to control the objective lens to be maintained precisely to the disc in the recording and the reconstructing process, a vibration isolator is no longer necessary. HVD TM will be compatible with existing disc storage systems, like CD and DVD, and enable us to expand its applications into other optical information storage systems.

  13. Design of a 360-degree holographic 3D video display using commonly available display panels and a paraboloid mirror

    Science.gov (United States)

    Onural, Levent

    2017-02-01

    Even barely acceptable quality holographic 3D video displays require hundreds of mega pixels with a pixel size in the order of a fraction of a micrometer, when conventional flat panel SLM arrangement is used. Smaller pixel sizes are essential to get larger diffraction angles. Common flat display panels, however, have pixel sizes in the order of tens of micrometers, and this results in diffraction angles in the order of one degree. Here in this design, an array of commonly available (similar to high-end mobile phone display panels) flat display panels, is used. Each flat panel, as an element of the array, directs its outgoing low-diffraction angle light beam to corresponding small portion of a large size paraboloid mirror; the mirror then reflects the slowly-expanding, information carrying beam to direct it at a certain exit angle; this beam constitutes a portion of the final real ghost-like 3D holographic image. The collection of those components from all such flat display panels cover the entire 360-degrees and thus constitute the final real 3D table-top holographic display with a 360-degrees viewing angle. The size of the resultant display is smaller compared to the physical size of the paraboloid mirror, or the overall size of the display panel array; however, an acceptable size table top display can be easily constructed for living-room viewing. A matching camera can also be designed by reversing the optical paths and by replacing the flat display panels by flat wavefront capture devices.

  14. Conformal symmetry and holographic cosmology

    NARCIS (Netherlands)

    Bzowski, A.W.

    2013-01-01

    This thesis presents a novel approach to cosmology using gauge/gravity duality. Analysis of the implications of conformal invariance in field theories leads to quantitative cosmological predictions which are in agreement with current data. Furthermore, holographic cosmology extends the theory of

  15. Holographic Grating Study. Volume 1

    Science.gov (United States)

    1979-03-01

    EFFICIENCY GRATING ANALYSIS AND MEASUREMENT 167 4. 1 High-Efficiency Holographic Grating Desl ^ri Isaues .... 167 4.2 Computer Modeling of High...one or more higher orders is maximized . This distinguishes them from low-efficiency gratings which utilize the zero order at hi^h efficiency

  16. Code Properties from Holographic Geometries

    Directory of Open Access Journals (Sweden)

    Fernando Pastawski

    2017-05-01

    Full Text Available Almheiri, Dong, and Harlow [J. High Energy Phys. 04 (2015 163.JHEPFG1029-847910.1007/JHEP04(2015163] proposed a highly illuminating connection between the AdS/CFT holographic correspondence and operator algebra quantum error correction (OAQEC. Here, we explore this connection further. We derive some general results about OAQEC, as well as results that apply specifically to quantum codes that admit a holographic interpretation. We introduce a new quantity called price, which characterizes the support of a protected logical system, and find constraints on the price and the distance for logical subalgebras of quantum codes. We show that holographic codes defined on bulk manifolds with asymptotically negative curvature exhibit uberholography, meaning that a bulk logical algebra can be supported on a boundary region with a fractal structure. We argue that, for holographic codes defined on bulk manifolds with asymptotically flat or positive curvature, the boundary physics must be highly nonlocal, an observation with potential implications for black holes and for quantum gravity in AdS space at distance scales that are small compared to the AdS curvature radius.

  17. Thermalization after holographic bilocal quench

    Science.gov (United States)

    Aref'eva, Irina Ya.; Khramtsov, Mikhail A.; Tikhanovskaya, Maria D.

    2017-09-01

    We study thermalization in the holographic (1 + 1)-dimensional CFT after simultaneous generation of two high-energy excitations in the antipodal points on the circle. The holographic picture of such quantum quench is the creation of BTZ black hole from a collision of two massless particles. We perform holographic computation of entanglement entropy and mutual information in the boundary theory and analyze their evolution with time. We show that equilibration of the entanglement in the regions which contained one of the initial excitations is generally similar to that in other holographic quench models, but with some important distinctions. We observe that entanglement propagates along a sharp effective light cone from the points of initial excitations on the boundary. The characteristics of entanglement propagation in the global quench models such as entanglement velocity and the light cone velocity also have a meaning in the bilocal quench scenario. We also observe the loss of memory about the initial state during the equilibration process. We find that the memory loss reflects on the time behavior of the entanglement similarly to the global quench case, and it is related to the universal linear growth of entanglement, which comes from the interior of the forming black hole. We also analyze general two-point correlation functions in the framework of the geodesic approximation, focusing on the study of the late time behavior.

  18. Code Properties from Holographic Geometries

    Science.gov (United States)

    Pastawski, Fernando; Preskill, John

    2017-04-01

    Almheiri, Dong, and Harlow [J. High Energy Phys. 04 (2015) 163., 10.1007/JHEP04(2015)163] proposed a highly illuminating connection between the AdS /CFT holographic correspondence and operator algebra quantum error correction (OAQEC). Here, we explore this connection further. We derive some general results about OAQEC, as well as results that apply specifically to quantum codes that admit a holographic interpretation. We introduce a new quantity called price, which characterizes the support of a protected logical system, and find constraints on the price and the distance for logical subalgebras of quantum codes. We show that holographic codes defined on bulk manifolds with asymptotically negative curvature exhibit uberholography, meaning that a bulk logical algebra can be supported on a boundary region with a fractal structure. We argue that, for holographic codes defined on bulk manifolds with asymptotically flat or positive curvature, the boundary physics must be highly nonlocal, an observation with potential implications for black holes and for quantum gravity in AdS space at distance scales that are small compared to the AdS curvature radius.

  19. Holographic complexity and spacetime singularities

    Energy Technology Data Exchange (ETDEWEB)

    Barbón, José L.F. [Instituto de Física Teórica IFT UAM/CSIC,C/ Nicolás Cabrera 13, Campus Universidad Autónoma de Madrid,Madrid 28049 (Spain); Rabinovici, Eliezer [Racah Institute of Physics, The Hebrew University,Jerusalem 91904 (Israel); Laboratoire de Physique Théorique et Hautes Energies, Université Pierre et Marie Curie, 4 Place Jussieu, 75252 Paris Cedex 05 (France)

    2016-01-15

    We study the evolution of holographic complexity in various AdS/CFT models containing cosmological crunch singularities. We find that a notion of complexity measured by extremal bulk volumes tends to decrease as the singularity is approached in CFT time, suggesting that the corresponding quantum states have simpler entanglement structure at the singularity.

  20. Optical properties of deposit models for paints: full-fields FFT computations and representative volume element

    Science.gov (United States)

    Azzimonti, D. F.; Willot, F.; Jeulin, D.

    2013-04-01

    A 3D model of microstructure containing spherical and rhombi-shaped inclusions 'falling' along a deposit direction is used to simulate the distribution of nanoscale color pigments in paints. The microstructure's anisotropy and length scales, characterized by their covariance functions and representative volume element, follow that of transversely isotropic or orthotropic media. Full-field computations by means of the fast Fourier method are undertaken to compute the local and effective permittivity function of the mixture, as a function of the wavelength in the visible spectrum. Transverse isotropy is numerically recovered for the effective permittivity of the deposit model of spheres. Furthermore, in the complex plane, the transverse and parallel components of the effective permittivity tensor are very close to the frontiers of the Hashin-Shtrikman's domain, at all frequencies (or color) of the incident wave. The representative volume element for the optical properties of paint deposit models are studied. At fixed accuracy, it is much larger for the imaginary part of the permittivity than for the real part, an effect of the strong variations of the electric displacement field, exhibiting hot-spots, a feature previously described in the context of conductivity.

  1. Phase tunable multilevel diffractive optical element based single laser exposure fabrication of three-dimensional photonic crystal templates

    Science.gov (United States)

    Chanda, Debashis; Herman, Peter R.

    2007-08-01

    The fabrication of diamond-like three-dimensional photonic crystal templates using a single laser exposure through a diffractive optical element has been demonstrated. An orthogonal combination of two linear phasemasks was used to define a two-dimensional diffractive optical element of multiple phase levels. By adjusting the gap between two phasemasks, a variable phase shift is shown by theory and demonstrated experimentally to control the interlacing position of two orthogonally rotated periodic structures. The transition of formation of diamond-like woodpile structures having tetragonal symmetry to structures having body-centered-tetragonal symmetry and variations in between has been demonstrated.

  2. A Wafer-Bonded, Floating Element Shear-Stress Sensor Using a Geometric Moire Optical Transduction Technique

    Science.gov (United States)

    Horowitz, Stephen; Chen, Tai-An; Chandrasekaran, Venkataraman; Tedjojuwono, Ken; Cattafesta, Louis; Nishida, Toshikazu; Sheplak, Mark

    2004-01-01

    This paper presents a geometric Moir optical-based floating-element shear stress sensor for wind tunnel turbulence measurements. The sensor was fabricated using an aligned wafer-bond/thin-back process producing optical gratings on the backside of a floating element and on the top surface of the support wafer. Measured results indicate a static sensitivity of 0.26 microns/Pa, a resonant frequency of 1.7 kHz, and a noise floor of 6.2 mPa/(square root)Hz.

  3. Color multiplexing using directional holographic gratings and linear polarization

    Energy Technology Data Exchange (ETDEWEB)

    Lugo, L I; Rodriguez, A; Ramirez, G; Guel, S; Nunez, O F, E-mail: roca@cactus.iico.uaslp.mx [Instituto de Investigacion en Comunicacion Optica (IICO) Universidad Autonoma de San Luis Potosi, S.L.P. (UASLP) (Mexico)

    2011-01-01

    We propose a system of multiplexing and de-multiplexing, which uses a holographic diffraction grating to compel modulated light of different colors to be sent through an optical fiber. Diffraction gratings were fabricated specifically to pick the desired direction in which we wanted the light of different wavelengths to impinge the optic fiber, and also to be separated at the output. It was been found that the system preserves the polarization of light, which give us a one more freedom degree, allowing us to process twice the original information amount.

  4. Research on producing high quality diffractive optical elements in volume at a low cost

    Science.gov (United States)

    Daschner, Walter

    1997-11-01

    Diffractive Optical Elements (DOEs) can be utilized in a variety of possible applications in modern optical, as well as optoelectronic systems. The current roadblock for application of DOEs in consumer products is not the feasibility of the approach, as numerous applications have been successfully demonstrated. In order for the breakthrough to occur in industry, it is important to determine a convenient and cost-effective method for manufacturing DOEs. The industry will improve the design of their legacy systems and start including DOEs only when the performance improvement (which the utilization of DOEs achieves), can be purchased with a minimal amount of additional capital investment and cost-per-part. Therefore, the focus of this dissertation was to find a cost-effective method of fabricating large quantities of DOEs with currently available fabrication tools. Direct-write approaches were investigated to fabricate high-quality masters for a subsequent replication procedure based upon molding or casting. Electron-Beam Direct-Write was carried-out in a positive Novolac-based photo-resist which provides dry etch resistivity. Another focus of this development was to find a way to minimize Electron-Beam writing time for a given element. Proximity effect characterization and compensation has been carried-out in order to increase the fidelity of the pattern reproduction. A dry-etching procedure has been developed in order to transfer resist profiles into the substrate material. During this transfer step, the etch rates of resist and substrate material can be controlled; this in turn allows a choice of final feature depth in the substrate material (depending on refractive index and wavelength in use). Two Gray-Scale masking approaches were developed to allow the cost-effective mass fabrication of DOEs in a single optical exposure step. Thin film evaporation of Inconel achieves high-quality masks at a high price. High Energy Beam Sensitive Glass, the second mask material

  5. Wavelength-coded volume holographic imaging endoscope for multidepth imaging.

    Science.gov (United States)

    Howlett, Isela D; Han, Wanglei; Rice, Photini; Barton, Jennifer K; Kostuk, Raymond K

    2017-10-01

    A wavelength-coded volume holographic imaging (WC-VHI) endoscope system capable of simultaneous multifocal imaging is presented. The system images light from two depths separated by 100  μm in a tissue sample by using axial chromatic dispersion of a gradient index probe in combination with two light-emitting diode sources and a multiplexed volume hologram to separate the images. This system is different from previous VHI systems in that it uses planar multiplexed gratings and does not require curved holographic gratings. This results in improved lateral imaging resolution from 228.1 to 322.5  lp/mm. This letter describes the design and fabrication of the WC-VHI endoscope and experimental images of hard and soft resolution targets and biological tissue samples to illustrate the performance properties. (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

  6. Compact lensless off-axis transmission digital holographic microscope.

    Science.gov (United States)

    Rostykus, Manon; Moser, Christophe

    2017-07-10

    Current compact lensless holographic microscopes are based on either multiple angle in-line holograms, multiple wavelength illumination or a combination thereof. Complex computational algorithms are necessary to retrieve the phase image which slows down the visualization of the image. Here we propose a simple compact lensless transmission holographic microscope with an off-axis configuration which simplifies considerably the computational processing to visualize the phase images and opens the possibility of real time phase imaging using off the shelf smart phone processors and less than $3 worth of optics and detectors, suitable for broad educational dissemination. This is achieved using a side illumination and analog hologram gratings to shape the reference and signal illumination beams from one light source. We demonstrate experimentally imaging of cells with a field of view (FOV) of ~12mm2, and a resolution of ~3.9μm.

  7. Photoacoustic holographic imaging of absorbers embedded in silicone.

    Science.gov (United States)

    Olsson, Erik; Gren, Per; Sjödahl, Mikael

    2011-06-10

    Light absorbing objects embedded in silicone have been imaged using photoacoustic digital holography. The photoacoustic waves were generated using a pulsed Nd:YAG laser, λ=1064  nm, and pulse length=12  ns. When the waves reached the silicone surface, they were measured optically along a line using a scanning laser vibrometer. The acoustic waves were then digitally reconstructed using a holographic algorithm. The laser vibrometer is proven to be sensitive enough to measure the surface velocity due to photoacoustic waves generated from laser pulses with a fluence allowed for human tissue. It is also shown that combining digital holographic reconstructions for different acoustic wavelengths provides images with suppressed noise and improved depth resolution. The objects are imaged at a depth of 16.5  mm with a depth resolution of 0.5  mm.

  8. Magnonic holographic devices for special type data processing

    Science.gov (United States)

    Khitun, Alexander

    2013-04-01

    In this work, we consider the possibility of building magnetic analog logic devices utilizing spin wave interference for special task data processing. As an example, we consider a multi-terminal magnonic matrix switch comprising multiferroic elements and a two-dimensional grid of magnetic waveguides connected via four-terminal cross-junctions. The multiferroic elements are placed on the periphery of the switch and used as input/output ports for signal conversion among the electric and magnetic domains. Data processing is accomplished via the use of spin wave interference within the magnonic matrix. We present the results of numerical modeling illustrating device operation for pattern matching, finding the period of the data string, and image processing. We also present the results of numerical modeling showing the device capabilities as a magnetic holographic memory. Magnonic holographic devices are of great potential to complement the conventional general-type processors in special task data processing and may provide a new direction for functional throughput enhancement. According to estimates, magnonic holographic devices can provide up to 1 Tb/cm2 data storage density and data processing rate exceeding 1018 bits/s/cm2. The physical limitations and practical challenges of the proposed approach are discussed.

  9. Method to Enhance the Operation of an Optical Inspection Instrument Using Spatial Light Modulators

    Science.gov (United States)

    Trolinger, James; Lal, Amit; Jo, Joshua; Kupiec, Stephen

    2012-01-01

    For many aspheric and freeform optical components, existing interferometric solutions require a custom computer-generated hologram (CGH) to characterize the part. The overall objective of this research is to develop hardware and a procedure to produce a combined, dynamic, Hartmann/ Digital Holographic interferometry inspection system for a wide range of advanced optical components, including aspheric and freeform optics. This new instrument would have greater versatility and dynamic range than currently available measurement systems. The method uses a spatial light modulator to pre-condition wavefronts for imaging, interferometry, and data processing to improve the resolution and versatility of an optical inspection instrument. Existing interferometers and Hartmann inspection systems have either too small a dynamic range or insufficient resolution to characterize conveniently unusual optical surfaces like aspherical and freeform optics. For interferometers, a specially produced, computer-generated holographic optical element is needed to transform the wavefront to within the range of the interferometer. A new hybrid wavefront sensor employs newly available spatial light modulators (SLMs) as programmable holographic optical elements (HOEs). The HOE is programmed to enable the same instrument to inspect an optical element in stages, first by a Hartmann measurement, which has a very large dynamic range but less resolution. The first measurement provides the information required to precondition a reference wave that avails the measurement process to the more precise phase shifting interferometry. The SLM preconditions a wavefront before it is used to inspect an optical component. This adds important features to an optical inspection system, enabling not just wavefront conditioning for null testing and dynamic range extension, but also the creation of hybrid measurement procedures. This, for example, allows the combination of dynamic digital holography and Hartmann

  10. High efficiency and flexible working distance digital in-line holographic microscopy based on Fresnel zone plate

    Science.gov (United States)

    Tian, Peng; Hua, Yilei; Yang, Fan; Li, Fanxing; Hu, Song; Yan, Wei

    2017-05-01

    Traditional digital in-line holography suffers from twin-image noise problems and extremely short working distances between the object and light source. Here, we propose lensless Fourier transform digital in-line holographic microscopy based on a single optical element. A Fresnel zone plate is used to split the incident light into two parts: one is scattered along the original direction, the other is gathered at a focal point and the sample is put behind the focus. The interference fringe pattern, formed by the two beams, is recorded digitally by a CCD camera. A novel reconstruction algorithm is proposed to present the object image. The proof-of-concept experiments demonstrate that the proposed technique can eliminate the twin-image noise problem, improving the image contrast with high efficiency, and increasing the flexibility of the working distance. Furthermore, a wide field of view and no contact make it a promising tool for the study of materials science, biology and microelectronics.

  11. Holographic kinetic k-essence model

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, Norman [Departamento de Fisica, Facultad de Ciencia, Universidad de Santiago de Chile, Casilla 307, Santiago (Chile)], E-mail: ncruz@lauca.usach.cl; Gonzalez-Diaz, Pedro F.; Rozas-Fernandez, Alberto [Colina de los Chopos, Instituto de Fisica Fundamental, Consejo Superior de Investigaciones Cientificas, Serrano 121, 28006 Madrid (Spain)], E-mail: a.rozas@cfmac.csic.es; Sanchez, Guillermo [Departamento de Matematica y Ciencia de la Computacion, Facultad de Ciencia, Universidad de Santiago de Chile, Casilla 307, Santiago (Chile)], E-mail: gsanchez@usach.cl

    2009-08-31

    We consider a connection between the holographic dark energy density and the kinetic k-essence energy density in a flat FRW universe. With the choice c{>=}1, the holographic dark energy can be described by a kinetic k-essence scalar field in a certain way. In this Letter we show this kinetic k-essential description of the holographic dark energy with c{>=}1 and reconstruct the kinetic k-essence function F(X)

  12. Holographic complexity in gauge/string superconductors

    Directory of Open Access Journals (Sweden)

    Davood Momeni

    2016-05-01

    Full Text Available Following a methodology similar to [1], we derive a holographic complexity for two dimensional holographic superconductors (gauge/string superconductors with backreactions. Applying a perturbation method proposed by Kanno in Ref. [2], we study behaviors of the complexity for a dual quantum system near critical points. We show that when a system moves from the normal phase (T>Tc to the superconductor phase (Tholographic complexity will be divergent.

  13. Multilayer Optical Learning Networks

    Science.gov (United States)

    Wagner, Kelvin; Psaltis, Demetri

    1987-08-01

    In this paper we present a new approach to learning in a multilayer optical neural network which is based on holographically interconnected nonlinear Fabry-Perot etalons. The network can learn the interconnections that form a distributed representation of a desired pattern transformation operation. The interconnections are formed in an adaptive and self aligning fashion, as volume holographic gratings in photorefractive crystals. Parallel arrays of globally space integrated inner products diffracted by the interconnecting hologram illuminate arrays of nonlinear Fabry-Perot etalons for fast thresholding of the transformed patterns. A phase conjugated reference wave interferes with a backwards propagating error signal to form holographic interference patterns which are time integrated in the volume of the photorefractive crystal in order to slowly modify and learn the appropriate self aligning interconnections. A holographic implementation of a single layer perceptron learning procedure is presented that can be extendept ,to a multilayer learning network through an optical implementation of the backward error propagation (BEP) algorithm.

  14. A finite element scheme to study the nonlinear optical response of a finite grating without and with defect

    NARCIS (Netherlands)

    Suryanto, A.; van Groesen, Embrecht W.C.; Hammer, Manfred; Hoekstra, Hugo

    We present a simple numerical scheme based on the finite element method (FEM) using transparent-influx boundary conditions to study the nonlinear optical response of a finite one-dimensional grating with Kerr medium. Restricting first to the linear case, we improve the standard FEM to get a fourth

  15. Nonreciprocal optical element of ring laser gyroscope based on the effect of light entrainment with moving medium

    Science.gov (United States)

    Gladyshev, V. O.; Goryushkina, D. D.; Kuryatov, V. N.

    2017-11-01

    This article describes the use of Fresnel-Fizeau effect in order to reduce the entrapment effect in a ring laser gyroscope. The study gives an analysis of the nonreciprocal optical element impact on the gyroscope output characteristic. Moreover, it numerically estimates the method’s effectiveness.

  16. Design and performance of coded aperture optical elements for the CESR-TA x-ray beam size monitor

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, J.P.; Chatterjee, A.; Conolly, C.; Edwards, E.; Ehrlichman, M.P. [Cornell University, Ithaca, NY 14853 (United States); Flanagan, J.W. [High Energy Accelerator Research Organization (KEK), Tsukuba (Japan); Department of Accelerator Science, Graduate University for Advanced Studies (SOKENDAI), Tsukuba (Japan); Fontes, E. [Cornell University, Ithaca, NY 14853 (United States); Heltsley, B.K., E-mail: bkh2@cornell.edu [Cornell University, Ithaca, NY 14853 (United States); Lyndaker, A.; Peterson, D.P.; Rider, N.T.; Rubin, D.L.; Seeley, R.; Shanks, J. [Cornell University, Ithaca, NY 14853 (United States)

    2014-12-11

    We describe the design and performance of optical elements for an x-ray beam size monitor (xBSM), a device measuring e{sup +} and e{sup −} beam sizes in the CESR-TA storage ring. The device can measure vertical beam sizes of 10–100μm on a turn-by-turn, bunch-by-bunch basis at e{sup ±} beam energies of ∼2–5GeV. x-rays produced by a hard-bend magnet pass through a single- or multiple-slit (coded aperture) optical element onto a detector. The coded aperture slit pattern and thickness of masking material forming that pattern can both be tuned for optimal resolving power. We describe several such optical elements and show how well predictions of simple models track measured performances. - Highlights: • We characterize optical element performance of an e{sup ±} x-ray beam size monitor. • We standardize beam size resolving power measurements to reference conditions. • Standardized resolving power measurements compare favorably to model predictions. • Key model features include simulation of photon-counting statistics and image fitting. • Results validate a coded aperture design optimized for the x-ray spectrum encountered.

  17. Holographic Two-Photon Induced Photopolymerization

    Data.gov (United States)

    Federal Laboratory Consortium — Holographic two-photon-induced photopolymerization (HTPIP) offers distinct advantages over conventional one-photon-induced photopolymerization and current techniques...

  18. Finite-element analysis of the optical-texture-mediated photoresponse in a nematic strip

    Science.gov (United States)

    Chung, Hayoung; Yun, Jung-Hoon; Choi, Joonmyung; Cho, Maenghyo

    2017-01-01

    In a nematic solid, wherein liquid crystal molecules are incorporated into polymeric chains, the chromophore phase is projected onto the polymer conformation, changing the stress-free configuration metric. Stimulated actuation cannot be separated from the structure itself, since the mesoscopic polymer properties dictate the degree and type of shape change. In this research, we focused on self-deforming device programming, inspired by recent optical techniques, to pattern nontrivial alignment textures and induce exotic strain fields on specimens. A finite-element framework incorporating a light-thermo-order coupled constitutive relation and geometric nonlinearities was utilized to compute mechanical deformations for given external stimuli. The distortion of planar strips into various exotic 3D shapes was simulated, and disclination-defect-like liquid crystal texture topographies with different defect strengths produced various many-poled shapes upon irradiation, as observed experimentally. The effects of the boundary conditions and geometric nonlinearities were also examined, exemplifying the need for a comprehensive finite-element-based framework. The same method was applied to textures naturally emerging due to static distortion, and the effects of the prescribed inhomogeneities on the overall deformations, which is the basis of inverse design, were observed. Furthermore, we analyzed the local Poisson-effect-induced instability resulting from inscribing a hedgehog disclination texture onto a solid; the onset of buckling-like deformations was observed energetically, and the relations between this onset and other physical properties were elucidated to enable microstate design while maintaining structural stability. These results will facilitate the development and comprehension of the mechanisms of remotely light-controlled self-assembly and propulsion systems that may soon be realized.

  19. Refractive and diffractive micro-optical elements and arrays prepared by the fast sol-gel processes

    Science.gov (United States)

    Haruvy, Yair; Gilath, Irith; Maniewictz, M.; Eisenberg, Naftali P.

    1997-09-01

    The optical quality of films and bulk elements obtained by the fast sol-gel method and the ease of preparation make this method technologically and economically attractive for micro- optical elements and arrays. Multiple replication of high-cost metal templates necessitates a two step process: initial replication onto disposable plastic, to produce negative- templates, and casting of the glass elements onto these plastic templates. Following introduction of the fast sol-gel micro-replication processes, the fabrication of refractive and diffractive micro-optical arrays is described in detail. The study focuses of the accuracy achievable by the replication of sharp curvatures by a viscous sol-gel resins. A further question addressed is how to obtain a thick crack-free self- supporting micro-optical array by such a process. Examples of replication results of Fresnel lenses and various types of lenslet arrays by this method are shown, and the various aspects of replication accuracy are discussed. The characterization of the thus produced micro-optical arrays is described, relating to the influence of mold and resin parameters on residual stresses and thence, the surface and bulk properties of the replicas. Various approaches to stress- minimization that can facilitate accurate replication in sol- gel derived matrices are discussed. Further, the preparative approach to highly patterned crack-free self-supporting thick elements is displayed, and the wide scope of new applications stemming from such elements is discussed. Finally, the new chemical approach to crack-free stress-free silica glasses by the sol-gel method is displayed.

  20. Performance of an optical encoder based on a nondiffractive beam implemented with a specific photodetection integrated circuit and a diffractive optical element.

    Science.gov (United States)

    Quintián, Fernando Perez; Calarco, Nicolás; Lutenberg, Ariel; Lipovetzky, José

    2015-09-01

    In this paper, we study the incremental signal produced by an optical encoder based on a nondiffractive beam (NDB). The NDB is generated by means of a diffractive optical element (DOE). The detection system is composed by an application specific integrated circuit (ASIC) sensor. The sensor consists of an array of eight concentric annular photodiodes, each one provided with a programmable gain amplifier. In this way, the system is able to synthesize a nonuniform detectivity. The contrast, amplitude, and harmonic content of the sinusoidal output signal are analyzed. The influence of the cross talk among the annular photodiodes is placed in evidence through the dependence of the signal contrast on the wavelength.

  1. Holographic Chern-Simons defects

    Energy Technology Data Exchange (ETDEWEB)

    Fujita, Mitsutoshi [Department of Physics and Astronomy, University of Kentucky,Lexington, KY 40506 (United States); Yukawa Institute for Theoretical Physics, Kyoto University,Kyoto 606-8502 (Japan); Melby-Thompson, Charles M. [Department of Physics, Fudan University,220 Handan Road, 200433 Shanghai (China); Kavli Institute for the Physics and Mathematics of the Universe (WPI),The University of Tokyo Institutes for Advanced Study (UTIAS),The University of Tokyo, Kashiwanoha, Kashiwa, 277-8583 (Japan); Meyer, René [Department of Physics and Astronomy, Stony Brook University,Stony Brook, New York 11794-3800 (United States); Kavli Institute for the Physics and Mathematics of the Universe (WPI),The University of Tokyo Institutes for Advanced Study (UTIAS),The University of Tokyo, Kashiwanoha, Kashiwa, 277-8583 (Japan); Sugimoto, Shigeki [Center for Gravitational Physics, Yukawa Institute for Theoretical Physics, Kyoto University,Kyoto 606-8502 (Japan); Kavli Institute for the Physics and Mathematics of the Universe (WPI),The University of Tokyo Institutes for Advanced Study (UTIAS),The University of Tokyo, Kashiwanoha, Kashiwa, 277-8583 (Japan)

    2016-06-28

    We study SU(N) Yang-Mills-Chern-Simons theory in the presence of defects that shift the Chern-Simons level from a holographic point of view by embedding the system in string theory. The model is a D3-D7 system in Type IIB string theory, whose gravity dual is given by the AdS soliton background with probe D7 branes attaching to the AdS boundary along the defects. We holographically renormalize the free energy of the defect system with sources, from which we obtain the correlation functions for certain operators naturally associated to these defects. We find interesting phase transitions when the separation of the defects as well as the temperature are varied. We also discuss some implications for the Fractional Quantum Hall Effect and for 2-dimensional QCD.

  2. Finite elements numerical codes as primary tool to improve beam optics in NIO1

    Science.gov (United States)

    Baltador, C.; Cavenago, M.; Veltri, P.; Serianni, G.

    2017-08-01

    The RF negative ion source NIO1, built at Consorzio RFX in Padua (Italy), is aimed to investigate general issues on ion source physics in view of the full-size ITER injector MITICA as well as DEMO relevant solutions, like energy recovery and alternative neutralization systems, crucial for neutral beam injectors in future fusion experiments. NIO1 has been designed to produce 9 H-beamlets (in a 3x3 pattern) of 15mA each and 60keV, using a three electrodes system downstream the plasma source. At the moment the source is at its early operational stage and only operation at low power and low beam energy is possible. In particular, NIO1 presents a too strong set of SmCo co-extraction electron suppression magnets (CESM) in the extraction grid (EG) that will be replaced by a weaker set of Ferrite magnets. A completely new set of magnets will be also designed and mounted on the new EG that will be installed next year, replacing the present one. In this paper, the finite element code OPERA 3D is used to investigate the effects of the three sets of magnets on beamlet optics. A comparison of numerical results with measurements will be provided where possible.

  3. Preparation of bent crystals as high-efficiency optical elements for hard x-ray astronomy

    Science.gov (United States)

    Buffagni, Elisa; Ferrari, Claudio; Rossi, Francesca; Marchini, Laura; Zappettini, Andrea

    2012-05-01

    Curved crystals, instead of flat mosaic crystals, can be used as optical elements of a Laue lens for hard x- and gamma-ray astronomy to increase the diffraction efficiency. We propose to achieve the bending of the crystals by a controlled surface damaging, which introduces defects in a layer of few tens nanometers in thickness undergoing a highly compressive strain. Several oriented silicon and gallium arsenide wafer crystals have been treated. The local and mean curvature radii of each sample have been determined by means of high resolution x-ray diffraction measurements in Bragg condition at low energy (8 keV). Silicon samples showed spherical curvatures, whereas GaAs-treated samples evidenced elliptical curvatures with major axes corresponding to the crystallographic directions. Curvature radii between 3 and 70 m were easily obtained in wafers of different thicknesses. The characterization of GaAs samples performed in Laue geometry at gamma-ray energy of 120 keV confirmed the increase of the diffraction efficiency in the bent crystals.

  4. Generation of Laguerre-Gaussian LGp0 beams using binary phase diffractive optical elements.

    Science.gov (United States)

    Bencheikh, Abdelhalim; Fromager, Michael; Ameur, Kamel Aït

    2014-07-20

    In recent years, considerable attention has been devoted to laser beams with specific intensity profile, i.e., non-Gaussian. In this work, we present a novel technique to generate high-radial-order Laguerre-Gaussian beams LG(p0) based on the use of a binary phase diffractive optical element (BPDOE). The latter is a phase plate made up of annular zones introducing alternatively a phase shift equal to 0 or π modeled on positions which do not coincide with the position of the zeros of the desired LG(p0) beam. The LG(p0) beams are obtained by transforming a fundamental Gaussian beam through an appropriate BPDOE. The design of the latter is based on the calculation of the Fresnel-Kirchhoff integral, and the diffracted intensity at the focus plane of a lens has been modeled analytically for the first time. The numerical simulations and experiment demonstrate a good beam quality transformation. Obtained LG(p0) are suitable for atom trap and pumping solid state laser applications.

  5. Long term measurements of the elemental composition and optical properties of aerosols in Amazonia

    Directory of Open Access Journals (Sweden)

    Arana A. A.

    2013-04-01

    Full Text Available Aerosols are being collected and analyzed for trace elements in two sites in Amazonia since January 2008. On eof the site, Manaus is located in a very pristine area in Central Amazonia. The site is nt affected directly by any urban plume for thousands of kilometers. A second site is located in Porto Velho, in a region with heavy land use change and deforestation. Optical properties (light scattering ad absorption are also being measured in order to study the climatic impact of aerosols. It was observed a clear seasonal pattern for both sites, with higher concentrations in the dry season. But the difference in seasonal concentrations observed for Porto Velho is much larger due to stronger anthropogenic influences. In Manaus during the wet season, very low concentrations of heavy metals, maybe the smallest measured in continental regions are reported. Positive Matrix Factorization (PMF was used to separate the different aerosol components. In general, for fine and coarse mode and wet and dry season, 3 aerosol components could be observed: 1 Natural biogenic aerosol; 2 biomass burning component; 3 Soil dust both locally and long range transported Sahara dust

  6. Influence of the limited detector size on spatial variations of the reconstruction accuracy in holographic tomography

    Science.gov (United States)

    Kostencka, Julianna; Kozacki, Tomasz; Hennelly, Bryan; Sheridan, John T.

    2017-06-01

    Holographic tomography (HT) allows noninvasive, quantitative, 3D imaging of transparent microobjects, such as living biological cells and fiber optics elements. The technique is based on acquisition of multiple scattered fields for various sample perspectives using digital holographic microscopy. Then, the captured data is processed with one of the tomographic reconstruction algorithms, which enables 3D reconstruction of refractive index distribution. In our recent works we addressed the issue of spatially variant accuracy of the HT reconstructions, which results from the insufficient model of diffraction that is applied in the widely-used tomographic reconstruction algorithms basing on the Rytov approximation. In the present study, we continue investigating the spatially variant properties of the HT imaging, however, we are now focusing on the limited spatial size of holograms as a source of this problem. Using the Wigner distribution representation and the Ewald sphere approach, we show that the limited size of the holograms results in a decreased quality of tomographic imaging in off-center regions of the HT reconstructions. This is because the finite detector extent becomes a limiting aperture that prohibits acquisition of full information about diffracted fields coming from the out-of-focus structures of a sample. The incompleteness of the data results in an effective truncation of the tomographic transfer function for the out-of-center regions of the tomographic image. In this paper, the described effect is quantitatively characterized for three types of the tomographic systems: the configuration with 1) object rotation, 2) scanning of the illumination direction, 3) the hybrid HT solution combing both previous approaches.

  7. Experimental teaching and training system based on volume holographic storage

    Science.gov (United States)

    Jiang, Zhuqing; Wang, Zhe; Sun, Chan; Cui, Yutong; Wan, Yuhong; Zou, Rufei

    2017-08-01

    The experiment of volume holographic storage for teaching and training the practical ability of senior students in Applied Physics is introduced. The students can learn to use advanced optoelectronic devices and the automatic control means via this experiment, and further understand the theoretical knowledge of optical information processing and photonics disciplines that have been studied in some courses. In the experiment, multiplexing holographic recording and readout is based on Bragg selectivity of volume holographic grating, in which Bragg diffraction angle is dependent on grating-recording angel. By using different interference angle between reference and object beams, the holograms can be recorded into photorefractive crystal, and then the object images can be read out from these holograms via angular addressing by using the original reference beam. In this system, the experimental data acquisition and the control of the optoelectronic devices, such as the shutter on-off, image loaded in SLM and image acquisition of a CCD sensor, are automatically realized by using LabVIEW programming.

  8. Holographic conductivity for logarithmic charged dilaton-Lifshitz solutions

    Directory of Open Access Journals (Sweden)

    A. Dehyadegari

    2016-07-01

    Full Text Available We disclose the effects of the logarithmic nonlinear electrodynamics on the holographic conductivity of Lifshitz dilaton black holes/branes. We analyze thermodynamics of these solutions as a necessary requirement for applying gauge/gravity duality, by calculating conserved and thermodynamic quantities such as the temperature, entropy, electric potential and mass of the black holes/branes. We calculate the holographic conductivity for a (2+1-dimensional brane boundary and study its behavior in terms of the frequency per temperature. Interestingly enough, we find out that, in contrast to the Lifshitz–Maxwell-dilaton black branes which have conductivity for all z, here in the presence of nonlinear gauge field, the holographic conductivity does exist provided z≤3 and vanishes for z>3. It is shown that independent of the nonlinear parameter β, the real part of the conductivity is the same for a specific value of frequency per temperature in both AdS and Lifshitz cases. Besides, the behavior of real part of conductivity for large frequencies has a positive slope with respect to large frequencies for a system with Lifshitz symmetry whereas it tends to a constant for a system with AdS symmetry. This behavior may be interpreted as existence of an additional charge carrier rather than the AdS case, and is due to the presence of the scalar dilaton field in model. Similar behavior for optical conductivity of single-layer graphene induced by mild oxygen plasma exposure has been reported.

  9. System for coherence-controlled holographic microscopy of living cells

    Science.gov (United States)

    Antoš, Martin; Čolláková, Jana; Veselý, Pavel; Chmelík, Radim; Křížová, Aneta

    2012-01-01

    Coherence Controlled Holographic Microscopy (CCHM) is a novel holographic technique for quantitative-phasecontrast (QPC) biological observations particularly of living cells. Owing to the ordinary (low coherence) illumination source, the CCHM images are of low noise, deprived of coherence noise (speckles) and the lateral resolution is improved by a factor of 2 compared to classic holographic microscopes. Long-lasting time-lapse experiments require elimination of the CCHM optical system instability in order to achieve precise QPC measurement and to maintain correct CCHM adjustment for its low-coherence operation. The critical part of CCHM is the interferometer, which is very sensitive to temperature fluctuations and air turbulences. The temperature stabilization of the whole microscope without air turbulences is therefore required to provide stability for long-term observations of living cells. Novel heated microscope box and stage designed and constructed for this purpose are described in the paper. The system maintains a constant temperature of both the microscope and of the sample set to 37 °C thus providing optimal living conditions for living human and animal cells. The system is completed with a novel flow-chamber for living-cells accommodation during observation. A service of the system to CCHM is demonstrated by a series of pictures of growing cells.

  10. Holographic renormalization in teleparallel gravity

    Energy Technology Data Exchange (ETDEWEB)

    Krssak, Martin [Universidade Estadual Paulista, Instituto de Fisica Teorica, Sao Paulo, SP (Brazil)

    2017-01-15

    We consider the problem of IR divergences of the action in the covariant formulation of teleparallel gravity in asymptotically Minkowski spacetimes. We show that divergences are caused by inertial effects and can be removed by adding an appropriate surface term, leading to the renormalized action. This process can be viewed as a teleparallel analog of holographic renormalization. Moreover, we explore the variational problem in teleparallel gravity and explain how the variation with respect to the spin connection should be performed. (orig.)

  11. Constructive use of holographic projections

    Energy Technology Data Exchange (ETDEWEB)

    Schroer, Bert [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro, RJ (Brazil); Institut fuer Theoretische Physik der FU, Berlin (Germany)

    2008-07-01

    Revisiting the old problem of existence of interacting models of QFT with new conceptual ideas and mathematical tools, one arrives at a novel view about the nature of QFT. The recent success of algebraic methods in establishing the existence of factorizing models suggests new directions for a more intrinsic constructive approach beyond Lagrangian quantization. Holographic projection simplifies certain properties of the bulk theory and hence is a promising new tool for these new attempts. (author)

  12. Engineering Holographic Superconductor Phase Diagrams

    OpenAIRE

    Chen, Jiunn-Wei; Dai, Shou-Huang; Maity, Debaprasad; Zhang, Yun-Long

    2016-01-01

    We study how to engineer holographic models with features of a high temperature superconductor phase diagram. We introduce a field in the bulk which provides a tunable "doping" parameter in the boundary theory. By designing how this field changes the effective masses of other order parameter fields, desired phase diagrams can be engineered. We give examples of generating phase diagrams with phase boundaries similar to a superconducting dome and an anti-ferromagnetic phase by including two ord...

  13. Transverse wave propagation in photonic crystal based on holographic polymer-dispersed liquid crystal.

    Science.gov (United States)

    Fuh, Andy Ying-Guey; Li, Ming Shian; Wu, Shing Trong

    2011-07-04

    This study investigates the transversely propagating waves in a body-centered tetragonal photonic crystal based on a holographic polymer-dispersed liquid crystal film. Rotating the film reveals three different transverse propagating waves. Degeneracy of optical Bloch waves from reciprocal lattice vectors explains their symmetrical distribution.

  14. Digital holographic microscopy: a novel tool to study the morphology, physiology and ecology of diatoms

    NARCIS (Netherlands)

    Zetsche, E.-M.; El Mallahi, A.; Meysman, F.J.R.

    2016-01-01

    Recent advances in optical components, computational hardware and image analysis algorithms have led to the development of a powerful new imaging tool, digital holographic microscopy (DHM). So far, DHM has been predominantly applied in the life sciences and medical research, and here, we evaluate

  15. Holographic cosmology from BIonic solutions

    Science.gov (United States)

    Sepehri, Alireza; Faizal, Mir; Setare, Mohammad Reza; Ali, Ahmed Farag

    2017-02-01

    In this paper, we will use a BIonic solution for analyzing the holographic cosmology. A BIonic solution is a configuration of a D3-brane and an anti-D3-brane connected by a wormhole, and holographic cosmology is a recent proposal to explain cosmic expansion by using the holographic principle. In our model, a BIonic configuration will be produced by the transition of fundamental black strings. The formation of a BIonic configuration will cause inflation. As the D3-brane moves away from the anti-D3-brane, the wormhole will get annihilated, and the inflation will end with the annihilation of this wormhole. However, it is possible for a D3-brane to collide with an anti-D3-brane. Such a collision will occur if the distance between the D3-brane and the anti-D3-brane reduces, and this will create tachyonic states. We will demonstrate that these tachyonic states will lead to the formation of a new wormhole, and this will cause acceleration of the universe before such a collision.

  16. Holographic interferometry in construction analysis

    Energy Technology Data Exchange (ETDEWEB)

    Hartikainen, T.

    1995-12-31

    In this work techniques for visualizing phase and opaque objects by ruby laser interferometry are introduced. A leakage flow as a phase object is studied by holographic interferometry and the intensity distribution of the interferograms presenting the leakage flow are computer-simulated. A qualitative and quantitative analysis of the leakage flow is made. The analysis is based on the experimental and theoretical results presented in this work. The holographic setup and the double pass method for visualizing leakage flow are explained. A vibrating iron plate is the opaque object. Transient impact waves are generated by a pistol bullet on the iron plate and visualized by holographic interferometry. An apparatus with the capability of detecting and calculating the delays necessary for laser triggering is introduced. A time series of interferograms presenting elastic wave formation in an iron plate is shown. A computer-simulation of the intensity distributions of these interferograms is made. An analysis based on the computer-simulation and the experimental data of the transient elastic wave is carried out and the results are presented. (author)

  17. FDTD simulations of forces on particles during holographic assembly.

    Science.gov (United States)

    Benito, David C; Simpson, Stephen H; Hanna, Simon

    2008-03-03

    We present finite-difference time-domain (FDTD) calculations of the forces and torques on dielectric particles of various shapes, held in one or many Gaussian optical traps, as part of a study of the physical limitations involved in the construction of micro- and nanostructures using a dynamic holographic assembler (DHA). We employ a full 3-dimensional FDTD implementation, which includes a complete treatment of optical anisotropy. The Gaussian beams are sourced using a multipole expansion of a fifth order Davis beam. Force and torques are calculated for pairs of silica spheres in adjacent traps, for silica cylinders trapped by multiple beams and for oblate silica spheroids and calcite spheres in both linearly and circularly polarized beams. Comparisons are drawn between the magnitudes of the optical forces and the Van der Waals forces acting on the systems. The paper also considers the limitations of the FDTD approach when applied to optical trapping.

  18. Application of holographic interferometry to the vibrational analysis of the harpsichord

    Science.gov (United States)

    Bryanston-Cross, P. J.; Gardner, J. W.

    1988-08-01

    This paper presents an original piece of research using holographic interferometry as a quantitative optical diagnostic. The object under investigation was the soundboard of a harpsichord. The results obtained show that it is possible to measure the spatial vibrational behaviour of the whole soundboard with an accuracy of better than 170 nm. Several features which characterize the vibration behaviour of the soundboard have been visualized including a discontinuity created by a crack which has resulted in a phase change of the interferometric fringes. Finally, the theoretical model response of the harpsichord soundboard is determined and compared to our holographic measurement.

  19. 3D color reconstructions in single DMD holographic display with LED source and complex coding scheme

    Science.gov (United States)

    Chlipała, Maksymilian; Kozacki, Tomasz

    2017-06-01

    In the paper we investigate the possibility of color reconstructions of holograms with a single DMD and incoherent LED source illumination. Holographic display is built with 4F imaging system centering reconstruction volume around the DMD surface. The display design employs complex coding scheme, which allows reconstructing complex wave from a binary hologram. In order to improve the quality of reconstructed holograms time multiplexing method is used. During the optical reconstructions we analyze quality of reconstructed holograms with incoherent RGB light sources as a function of reconstruction distance, present the possibility of 3D hologram reconstruction, and investigate temporal coherence effects in holographic display with the DMD.

  20. Fully computed holographic stereogram based algorithm for computer-generated holograms with accurate depth cues.

    Science.gov (United States)

    Zhang, Hao; Zhao, Yan; Cao, Liangcai; Jin, Guofan

    2015-02-23

    We propose an algorithm based on fully computed holographic stereogram for calculating full-parallax computer-generated holograms (CGHs) with accurate depth cues. The proposed method integrates point source algorithm and holographic stereogram based algorithm to reconstruct the three-dimensional (3D) scenes. Precise accommodation cue and occlusion effect can be created, and computer graphics rendering techniques can be employed in the CGH generation to enhance the image fidelity. Optical experiments have been performed using a spatial light modulator (SLM) and a fabricated high-resolution hologram, the results show that our proposed algorithm can perform quality reconstructions of 3D scenes with arbitrary depth information.

  1. Design and characterization of refractive secondary optical elements for a point-focus Fresnel lens-based high CPV system

    Science.gov (United States)

    Ferrer-Rodríguez, Juan P.; Baig, Hasan; Riverola, Alberto; Fernández, Eduardo F.; Chemisana, Daniel; Almonacid, Florencia; Mallick, Tapas K.; Pérez-Higueras, Pedro

    2017-09-01

    Point-focus Fresnel lens-based High Concentrator Photovoltaic (HCPV) systems are usually equipped with refractive secondary optical elements (SOE) in order to improve their performance. Two basic SOE designs are optically modeled and simulated in this work: Domed-Kaleidoscope (D-K) with breaking-symmetry top and SILO (SIngle-Lens-Optical element). Wavelength-dependent optical material properties like refractive index and absorption coefficient, as well as the spectral response of a typical triple-junction (TJ) solar cell, are included in the ray tracing simulations. Moreover, using a CPV Solar Simulator "Helios 3198", both HCPV units are experimentally characterized. The acceptance angle characteristics of both HCPV units, obtained through optical simulations and through indoor characterization, are compared. The acceptance angle characteristic is better for the HCPV unit with the D-K SOE both in simulations and in experimental measurements, showing concordance between simulation and experiment. However, simulation results underestimate the experimental ones concerning the acceptance angle, which will be investigated in future works.

  2. Digital Holographic Interferometry for Airborne Particle Characterization

    Science.gov (United States)

    2015-03-19

    and its extinction cross section, and a computational demonstration that holographic interferometry can resolve aerosol particle size evolution ...hologram and its extinction cross section, and a computational demonstration that holographic interferometry can resolve aerosol particle size... evolution . 1. REPORT DATE (DD-MM-YYYY) 4. TITLE AND SUBTITLE 13. SUPPLEMENTARY NOTES 12. DISTRIBUTION AVAILIBILITY STATEMENT 6. AUTHORS 7. PERFORMING

  3. Applied optics and optical engineering v.9

    CERN Document Server

    Shannon, Robert

    1983-01-01

    Applied Optics and Optical Engineering, Volume IX covers the theories and applications of optics and optical engineering. The book discusses the basic algorithms for optical engineering; diffraction gratings, ruled and holographic; and recording and reading of information on optical disks. The text also describes the perfect point spread function; the multiple aperture telescope diffraction images; and the displays and simulators. Ophthalmic optics, as well as the canonical and real-space coordinates used in the theory of image formation are also encompassed. Optical engineers and students tak

  4. Holographic complexity for time-dependent backgrounds

    Energy Technology Data Exchange (ETDEWEB)

    Momeni, Davood, E-mail: davoodmomeni78@gmail.com [Eurasian International Center for Theoretical Physics and Department of General Theoretical Physics, Eurasian National University, Astana 010008 (Kazakhstan); Faizal, Mir, E-mail: mirfaizalmir@googlemail.com [Irving K. Barber School of Arts and Sciences, University of British Columbia, Okanagan, 3333 University Way, Kelowna, British Columbia V1V 1V7 (Canada); Department of Physics and Astronomy, University of Lethbridge, Lethbridge, Alberta, T1K 3M4 (Canada); Bahamonde, Sebastian, E-mail: sebastian.beltran.14@ucl.ac.uk [Department of Mathematics, University College London, Gower Street, London, WC1E 6BT (United Kingdom); Myrzakulov, Ratbay [Eurasian International Center for Theoretical Physics and Department of General Theoretical Physics, Eurasian National University, Astana 010008 (Kazakhstan)

    2016-11-10

    In this paper, we will analyze the holographic complexity for time-dependent asymptotically AdS geometries. We will first use a covariant zero mean curvature slicing of the time-dependent bulk geometries, and then use this co-dimension one spacelike slice of the bulk spacetime to define a co-dimension two minimal surface. The time-dependent holographic complexity will be defined using the volume enclosed by this minimal surface. This time-dependent holographic complexity will reduce to the usual holographic complexity for static geometries. We will analyze the time-dependence as a perturbation of the asymptotically AdS geometries. Thus, we will obtain time-dependent asymptotically AdS geometries, and we will calculate the holographic complexity for such time-dependent geometries.

  5. Determination the allowable error to adjustment of a diffractive optical element and the accuracy demanded to set the parameters of the focused beam

    Science.gov (United States)

    Murzin, Serguei P.; Kazanskiy, Nikolay L.

    2017-04-01

    Diffractive optical elements capable of transforming the wavefront in a predetermined manner, with high efficiency may be apply in recording systems and reading information, and also its transmission in the optical range. To improve the efficiency use of diffractive optical elements is expedient to determine the requirements for their adjustment and the accuracy of beam setting parameters forming. As an example, considered the use of a diffractive optical element for transmitting high-power laser beam for the purpose to conducting the appropriate heat treatment of the process object. It was determined that the permissible error of alignment of the optical element is no more ΔU1 = ΔV = 0.18·10-3 m, the accuracy of the focused beam parameters should not be lower ΔrΦ/rΦ = 3.1 %; ΔRΦ/RΦ = 2%, and the permissible value of rotation angle Φ error of the diffractive optical element is ΔΦ = 2.30. To solve this problem a diffractive optical element is characterized by adequate values of allowable errors. Keywords: diffractive optical element, laser beam, adjustment, accuracy

  6. Coexistence of two vector order parameters: a holographic model for ferromagnetic superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Amoretti, Andrea [Dipartimento di Fisica, Università di Genova, and I.N.F.N. - Sezione di Genova, via Dodecaneso 33, 16146, Genova (Italy); Braggio, Alessandro [CNR-SPIN, via Dodecaneso 33, 16146, Genova (Italy); Maggiore, Nicola; Magnoli, Nicodemo [Dipartimento di Fisica, Università di Genova, and I.N.F.N. - Sezione di Genova, via Dodecaneso 33, 16146, Genova (Italy); Musso, Daniele [Physique Théorique et Mathématique, Université Libre de Bruxelles, C.P. 231, 1050 Bruxelles (Belgium)

    2014-01-13

    We study a generalization of the standard holographic p-wave superconductor featuring two interacting vector order parameters. Basing our argument on the symmetry and linear response properties of the model, we propose it as a holographic effective theory describing a strongly coupled ferromagnetic superconductor. We show that the two order parameters undergo concomitant condensations as a manifestation of an intrinsically interlaced charge/spin dynamics. Such intertwined dynamics is confirmed by the study of the transport properties. We characterize thoroughly the equilibrium and the linear response (i.e. optical conductivity and spin susceptibility) of the model at hand by means of a probe approximation analysis. Some insight about the effects of backreaction in the normal phase can be gained by analogy with the s-wave unbalanced holographic superconductor.

  7. Resonant holographic measurements of laser ablation plume expansion in vacuum and argon gas backgrounds

    Energy Technology Data Exchange (ETDEWEB)

    Lindley, Roger Alan [Michigan Univ., Ann Arbor, MI (United States)

    1993-01-01

    This thesis discusses the following on resonant holographic measurements of laser ablation plume expansion: Introduction to laser ablation; applications of laser ablation; The study of plume expansion; holographic interferometry; resonant holographic interferometry; accounting for finite laser bandwidth; The solution for doppler broadening and finite bandwidth; the main optical table; the lumonics laser spot shape; developing and reconstructing the holograms; plume expansion in RF/Plasma Environments; Determining λ°; resonant refraction effects; fringe shift interpretation; shot-to-shot consistency; laser ablation in vacuum and low pressure, inert, background gas; theoretically modeling plume expansion in vacuum and low pressure, inert, background gas; and laser ablation in higher pressure, inert, background gas.

  8. Ultrahigh-definition dynamic 3D holographic display by active control of volume speckle fields

    Science.gov (United States)

    Yu, Hyeonseung; Lee, Kyeoreh; Park, Jongchan; Park, Yongkeun

    2017-01-01

    Holographic displays generate realistic 3D images that can be viewed without the need for any visual aids. They operate by generating carefully tailored light fields that replicate how humans see an actual environment. However, the realization of high-performance, dynamic 3D holographic displays has been hindered by the capabilities of present wavefront modulator technology. In particular, spatial light modulators have a small diffraction angle range and limited pixel number limiting the viewing angle and image size of a holographic 3D display. Here, we present an alternative method to generate dynamic 3D images by controlling volume speckle fields significantly enhancing image definition. We use this approach to demonstrate a dynamic display of micrometre-sized optical foci in a volume of 8 mm × 8 mm × 20 mm.

  9. A versatile three/four crystal X-ray diffractometer for X-ray optical elements: Performance and applications

    DEFF Research Database (Denmark)

    Christensen, Finn Erland; Hornstrup, Allan; Jacobsen, E.

    1987-01-01

    A versatile X-ray diffractometer for the study of X-ray optical elements such as grazing incidence mirrors, crystals and X-ray gratings has been built and put into operation at the Danish Space Research Institute. The diffractrometer is built on a 1.5 m long granite bench with the X-ray source...... located at one end of the bench where it can be rotated around a fixed vertical axis. The beam defining elements are perfect crystals of Si, Ge or quartz. With these it is possible to define a highly collimated beam of a few arcsec fwhm in the scattering plane. Examples of measurements on various X...

  10. Read-only holographic versatile disc system using laser diode

    Science.gov (United States)

    Horimai, Hideyoshi; Tan, Xiaodi

    2006-05-01

    A Read-only Holographic Versatile Disc (HVD-ROM) system, using a laser diode for high capacity and high data transfer rates storage system, is proposed. With the collinear technologies' unique configuration the optical pickup can be designed as small as a DVD's, and can be placed on one side of the disc. With the HVD's special structure, the system can servo the focus/tracking and locate reading/writing address. The experiments and theoretical studies suggest that a laser diode is very suitable as a light source of our HVD-ROM system.

  11. Analysis of tolerances in polytopic-multiplexing holographic data storage.

    Science.gov (United States)

    Ide, Tatsuro

    2016-04-10

    A fast Fourier transformation (FFT)-based simulator was developed to analyze a recovered image of a hologram formed by polytopic multiplexing holographic data storage and to determine the positional tolerances of optical devices. By focusing the positional shift of 4f configuration devices (phase mask, SLM, polytopic filter, and camera), the number of FFT iterations was reduced, and the calculation speed was improved. Using the simulator, the positional tolerances of these devices were determined. Also, to validate the simulator, simulated readout images under defocuses of the phase mask and camera were compared with experimentally obtained images and found to agree well.

  12. Depth-filtering in common-path digital holographic microscopy.

    Science.gov (United States)

    Finkeldey, Markus; Göring, Lena; Brenner, Carsten; Hofmann, Martin; Gerhardt, Nils C

    2017-08-07

    We demonstrate a method to select different layers in a sample using a low coherent gating approach combined with a stable common-path quantitative phase imaging microscopy setup. The depth-filtering technique allows us to suppress the negative effects generated by multiple interference patterns of overlaying optical interfaces in the sample. It maintains the compact and stable common-path setup, while enabling images with a high phase sensitivity and acquisition speed. We use a holographic microscope in reflective geometry with a non-tunable low coherence light source. First results of this technique are shown by imaging the hardware layer of a standard micro-controller through its thinned substrate.

  13. Engineering Optics

    CERN Document Server

    Iizuka, Keigo

    2008-01-01

    Engineering Optics is a book for students who want to apply their knowledge of optics to engineering problems, as well as for engineering students who want to acquire the basic principles of optics. It covers such important topics as optical signal processing, holography, tomography, holographic radars, fiber optical communication, electro- and acousto-optic devices, and integrated optics (including optical bistability). As a basis for understanding these topics, the first few chapters give easy-to-follow explanations of diffraction theory, Fourier transforms, and geometrical optics. Practical examples, such as the video disk, the Fresnel zone plate, and many more, appear throughout the text, together with numerous solved exercises. There is an entirely new section in this updated edition on 3-D imaging.

  14. Production Technology of Holographic Diffraction Gratings Based on Inorganic Vacuum Photoresists

    Directory of Open Access Journals (Sweden)

    Dan’ko, V.A.

    2014-09-01

    Full Text Available An innovative project on development of the technological method for holographic diffraction gratings production which allows to produce high-quality diffractive elements with spatial frequencies from 600 to 3600 mm–1 for spectral instruments have been carried out. The technological instructions for the implementation of this method have been developed and experimental samples are produced. It was established that the characteristics of experimental samples of the holographic diffraction gratings produced under this project meet the specifications and the state standard 3-6128-86.

  15. Athermally photoreduced graphene oxides for three-dimensional holographic images

    Science.gov (United States)

    Li, Xiangping; Ren, Haoran; Chen, Xi; Liu, Juan; Li, Qin; Li, Chengmingyue; Xue, Gaolei; Jia, Jia; Cao, Liangcai; Sahu, Amit; Hu, Bin; Wang, Yongtian; Jin, Guofan; Gu, Min

    2015-01-01

    The emerging graphene-based material, an atomic layer of aromatic carbon atoms with exceptional electronic and optical properties, has offered unprecedented prospects for developing flat two-dimensional displaying systems. Here, we show that reduced graphene oxide enabled write-once holograms for wide-angle and full-colour three-dimensional images. This is achieved through the discovery of subwavelength-scale multilevel optical index modulation of athermally reduced graphene oxides by a single femtosecond pulsed beam. This new feature allows for static three-dimensional holographic images with a wide viewing angle up to 52 degrees. In addition, the spectrally flat optical index modulation in reduced graphene oxides enables wavelength-multiplexed holograms for full-colour images. The large and polarization-insensitive phase modulation over π in reduced graphene oxide composites enables to restore vectorial wavefronts of polarization discernible images through the vectorial diffraction of a reconstruction beam. Therefore, our technique can be leveraged to achieve compact and versatile holographic components for controlling light. PMID:25901676

  16. Effect of environmental temperature on diffraction efficiency for multilayer diffractive optical elements in Mid-wave infrared

    Science.gov (United States)

    Piao, Mingxu; Cui, Qingfeng; Zhu, Hao; Zhang, Bo

    2014-11-01

    In this paper, the effect of environmental temperature change on multilayer diffractive optical elements (MLDOEs) is evaluated from the viewpoint of the diffraction efficiency and the polychromatic integral diffraction efficiency (PIDE). As environmental temperature changes, the microstructure heights of MLDOEs expand or contract, and refractive indices of substrate materials also change. Based on the changes in microstructure height and substrate material index with environmental temperature, the theoretical relation between diffraction efficiency of MLDOEs and environmental temperature is deduced. A practical 3-5μm Mid-wave infrared (MWIR) optical system designed with a MLDOE, which made of ZNSE and GE, is discussed to illustrate the influence of environmental temperature change. The result shows that diffraction efficiency reduction is no more than 85% and PIDE reduction is less than 50% when environmental temperature ranges from -20°C to 60°C. According to the calculated diffraction efficiency in different environmental temperatures, the MTF of hybrid optical system is modified and the modified MTF curve is compared with the original MTF curve. Although the hybrid optical system achieved passive athermalization in above environmental temperature range, the modified MTF curve also remarkably decline in environmental temperature extremes after the consideration of diffraction efficiency change of MLDOE. It is indicated that the image quality of hybrid optical system with ZNSE-GE MLDOE is significantly sensitive to environmental temperature change. The analysis result can be used for optical engineering design with MLDOEs in MWIR.

  17. Miniature lightweight x-ray optics (MiXO) for surface elemental composition mapping of asteroids and comets

    OpenAIRE

    Hong, JaeSub; Romaine, Suzanne; team, the MiXO

    2016-01-01

    The compositions of diverse planetary bodies are of fundamental interest to planetary science, providing clues to the formation and evolutionary history of the target bodies and the Solar system as a whole. Utilizing the X-ray fluorescence unique to each atomic element, X-ray imaging spectroscopy is a powerful diagnostic tool of the chemical and mineralogical compositions of diverse planetary bodies. Until now the mass and volume of focusing X-ray optics have been too large for resource-limit...

  18. Three-dimensional identification of stem cells by computational holographic imaging

    OpenAIRE

    Moon, Inkyu; Javidi, Bahram

    2006-01-01

    We present an optical imaging system and mathematical algorithms for three-dimensional sensing and identification of stem cells. Data acquisition of stem cells is based on holographic microscopy in the Fresnel domain by illuminating the cells with a laser. In this technique, the holograms of stem cells are optically recorded with an image sensor array interfaced with a computer and three-dimensional images of the stem cells are reconstructed from the Gabor-filtered digital holograms. The Gabo...

  19. Design of co-path scanning long trace profiler for measurement of x-ray space optical elements

    Science.gov (United States)

    Shun, Li; Yan, Gong; Wei, Zhang; Yang, Zhao

    2010-08-01

    The Long Trace Profiler (LTP) is a precision surface slope error measurement instrument used in synchrotron radiation optics for many years. By making some modifications to the LTP system, we developed a co-path scanning LTP (CSLTP) system to test the cylindrical aspherical surface which used in X-ray space optics. To reduce the mistake caused by air turbulence and manufacture faults of optical elements used, the CSLTP is designed with the least difference between the testing beam path and the reference beam path. Also, it uses multiple-beam interference but double beam interference to reduce the width of beam fringe. This improves the position precision of the beam fringe on the image plane.

  20. Wafer-level fabrication of multi-element glass lenses: lens doublet with improved optical performances.

    Science.gov (United States)

    Albero, Jorge; Perrin, Stéphane; Passilly, Nicolas; Krauter, Johann; Gauthier-Manuel, Ludovic; Froehly, Luc; Lullin, Justine; Bargiel, Sylwester; Osten, Wolfgang; Gorecki, Christophe

    2016-01-01

    This Letter reports on the fabrication of glass lens doublets arranged in arrays and realized at wafer level by means of micro-fabrication. The technique is based on the accurate vertical assembly of separately fabricated glass lens arrays. Since each one of these arrays is obtained by glass melting in silicon cavities, silicon is employed as a spacer in order to build a well-aligned and robust optical module. It is shown that optical performance achieved by the lens doublet is better than for a single lens of equivalent numerical aperture, thanks to lower optical aberrations. The technique has good potential to match the optical requirements of miniature imaging systems.

  1. Transformation and patterning of supermicelles using dynamic holographic assembly.

    Science.gov (United States)

    Gould, Oliver E C; Qiu, Huibin; Lunn, David J; Rowden, John; Harniman, Robert L; Hudson, Zachary M; Winnik, Mitchell A; Miles, Mervyn J; Manners, Ian

    2015-12-02

    Although the solution self-assembly of block copolymers has enabled the fabrication of a broad range of complex, functional nanostructures, their precise manipulation and patterning remain a key challenge. Here we demonstrate that spherical and linear supermicelles, supramolecular structures held together by non-covalent solvophobic and coordination interactions and formed by the hierarchical self-assembly of block copolymer micelle and block comicelle precursors, can be manipulated, transformed and patterned with mediation by dynamic holographic assembly (optical tweezers). This allows the creation of new and stable soft-matter superstructures far from equilibrium. For example, individual spherical supermicelles can be optically held in close proximity and photocrosslinked through controlled coronal chemistry to generate linear oligomeric arrays. The use of optical tweezers also enables the directed deposition and immobilization of supermicelles on surfaces, allowing the precise creation of arrays of soft-matter nano-objects with potentially diverse functionality and a range of applications.

  2. Holographic aids for internal combustion engine flow studies

    Science.gov (United States)

    Regan, C.

    1984-01-01

    Worldwide interest in improving the fuel efficiency of internal combustion (I.C.) engines has sparked research efforts designed to learn more about the flow processes of these engines. The flow fields must be understood prior to fuel injection in order to design efficient valves, piston geometries, and fuel injectors. Knowledge of the flow field is also necessary to determine the heat transfer to combustion chamber surfaces. Computational codes can predict velocity and turbulence patterns, but experimental verification is mandatory to justify their basic assumptions. Due to their nonintrusive nature, optical methods are ideally suited to provide the necessary velocity verification data. Optical sytems such as Schlieren photography, laser velocimetry, and illuminated particle visualization are used in I.C. engines, and now their versatility is improved by employing holography. These holographically enhanced optical techniques are described with emphasis on their applications in I.C. engines.

  3. A Holographic Twin Higgs Model

    OpenAIRE

    Geller, Michael; Telem, Ofri

    2014-01-01

    We present a UV completion of the twin Higgs idea in the framework of holographic composite Higgs. The SM contribution to the Higgs potential is effectively cut off by the SM-singlet mirror partners at the sigma-model scale f, naturally allowing for m_{KK} beyond the LHC reach. The bulk symmetry is SU(7) X SO(8), broken on the IR brane into SU(7) X SO(7) and on the UV brane into (SU(3) X SU(2) X U(1))^{SM} X (SU(3) X SU(2) X U(1))^{mirror} X Z2. The field content on the UV brane is the SM, ex...

  4. Optical properties, morphology and elemental composition of atmospheric particles at T1 supersite on MILAGRO campaign

    Directory of Open Access Journals (Sweden)

    G. Carabali

    2012-03-01

    Full Text Available Atmospheric particles were sampled at T1 supersite during MILAGRO campaign, in March 2006. T1 was located at the north of Mexico City (MC. Aerosol sampling was done by placing copper grids for Transmission Electron Microscope (TEM on the last five of an 8-stage MOUDI cascade impactor. Samples were obtained at different periods to observe possible variations on morphology. Absorption and scattering coefficients, as well as particle concentrations (0.01–3 μm aerodynamic diameter were measured simultaneously using a PSAP absorption photometer, a portable integrating nephelometer, and a CPC particle counter. Particle images were acquired at different magnifications using a CM 200 Phillips TEM-EDAX system, and then calculated the border-based fractal dimension. Also, Energy Dispersive X-Ray Spectroscopy (EDS was used to determine the elemental composition of particles. The morphology of atmospheric particles for two aerodynamic diameters (0.18 and 1.8 μm was compared using border-based fractal dimension to relate it to the other particle properties, because T1-generated particles have optical, morphological and chemical properties different from those transported by the MC plume.

    Particles sampled under MC pollution influence showed not much variability, suggesting that more spherical particles (border-based fractal dimension close to 1.0 are more common in larger sizes (d50 = 1.8 μm, which may be attributed to aerosol aging and secondary aerosol formation. Between 06:00 and 09:00 a.m., smaller particles (d50 = 0.18 μm had more irregular shapes resulting in higher border-based fractal dimensions (1.2–1.3 for samples with more local influence. EDS analysis in d50 = 0.18 μm particles showed high contents of carbonaceous material, Si, Fe, K, and Co. Perhaps, this indicates an impact from industrial and vehicle emissions on atmospheric particles at T1.

  5. Scanning for piecewise holographic grating generation

    Science.gov (United States)

    Miler, Miroslav; Kostka, František; Dvořák, Martin

    2006-03-01

    Holographic gratings that are recorded as a whole in a single exposition are limited in size because of the available power of suitable laser sources and nonlinear response of and/or reciprocity effects in a recording medium. A sequential-illumination technique can help in this case. This technique relies on piecewise grating recording that consists in scanning with a relatively narrow laser beam, a pencil, across the grating surface employing an appropriate optical set up. The contribution describes a method utilizing a small parallel displacement of the laser pencil by turning a plane-parallel plate, which is then transferred to a larger angular deflection by a short focus lens. Simultaneously, the beam is expanded angularly. This all can take place either before light enters the beam-splitter or along paths of both the interfering beams. In this way, uniform diffraction efficiency gratings that are much larger than the cross-section of the beam can be achieved. The laser pencil can be moved in polar or rectangular coordinates. Recording of larger gratings supposes large precise collimating mirrors. If they are not available e.g. due to their high price, they can be replaced by long propagating homocentric beams with their origins in the same distance from the recording plate.

  6. Unitarity and the Holographic S-Matrix

    Energy Technology Data Exchange (ETDEWEB)

    Fitzpatrick, A.Liam; /Stanford U., Phys. Dept.; Kaplan, Jared; /SLAC

    2012-08-28

    The bulk S-Matrix can be given a non-perturbative definition in terms of the flat space limit of AdS/CFT. We show that the unitarity of the S-Matrix, ie the optical theorem, can be derived by studying the behavior of the OPE and the conformal block decomposition in the flat space limit. When applied to perturbation theory in AdS, this gives a holographic derivation of the cutting rules for Feynman diagrams. To demonstrate these facts we introduce some new techniques for the analysis of conformal field theories. Chief among these is a method for conglomerating local primary operators O{sub 1} and O{sub 2} to extract the contribution of an individual primary O{sub {Delta},{ell}} in their OPE. This provides a method for isolating the contribution of specific conformal blocks which we use to prove an important relation between certain conformal block coefficients and anomalous dimensions. These techniques make essential use of the simplifications that occur when CFT correlators are expressed in terms of a Mellin amplitude.

  7. Fidelity susceptibility as holographic PV-criticality

    Energy Technology Data Exchange (ETDEWEB)

    Momeni, Davood, E-mail: davoodmomeni78@gmail.com [Eurasian International Center for Theoretical Physics and Department of General & Theoretical Physics, Eurasian National University, Astana 010008 (Kazakhstan); Faizal, Mir, E-mail: mirfaizalmir@googlemail.com [Department of Physics and Astronomy, University of Lethbridge, Lethbridge, Alberta T1K 3M4 (Canada); Irving K. Barber School of Arts and Sciences, University of British Columbia – Okanagan, 3333 University Way, Kelowna, British Columbia V1V 1V7 (Canada); Myrzakulov, Kairat, E-mail: kairatmyrzakul@gmail.com [Eurasian International Center for Theoretical Physics and Department of General & Theoretical Physics, Eurasian National University, Astana 010008 (Kazakhstan); Myrzakulov, Ratbay, E-mail: rmyrzakulov@gmail.com [Eurasian International Center for Theoretical Physics and Department of General & Theoretical Physics, Eurasian National University, Astana 010008 (Kazakhstan)

    2017-02-10

    It is well known that entropy can be used to holographically establish a connection among geometry, thermodynamics and information theory. In this paper, we will use complexity to holographically establish a connection among geometry, thermodynamics and information theory. Thus, we will analyze the relation among holographic complexity, fidelity susceptibility, and thermodynamics in extended phase space. We will demonstrate that fidelity susceptibility (which is the informational complexity dual to a maximum volume in AdS) can be related to the thermodynamical volume (which is conjugate to the cosmological constant in the extended thermodynamic phase space). Thus, this letter establishes a relation among geometry, thermodynamics, and information theory, using complexity.

  8. Holographic entanglement entropy on generic time slices

    Science.gov (United States)

    Kusuki, Yuya; Takayanagi, Tadashi; Umemoto, Koji

    2017-06-01

    We study the holographic entanglement entropy and mutual information for Lorentz boosted subsystems. In holographic CFTs at zero and finite temperature, we find that the mutual information gets divergent in a universal way when the end points of two subsystems are light-like separated. In Lifshitz and hyperscaling violating geometries dual to non-relativistic theories, we show that the holographic entanglement entropy is not well-defined for Lorentz boosted subsystems in general. This strongly suggests that in non-relativistic theories, we cannot make a real space factorization of the Hilbert space on a generic time slice except the constant time slice, as opposed to relativistic field theories.

  9. Corrections to holographic entanglement plateau

    Science.gov (United States)

    Chen, Bin; Li, Zhibin; Zhang, Jia-ju

    2017-09-01

    We investigate the robustness of the Araki-Lieb inequality in a two-dimensional (2D) conformal field theory (CFT) on torus. The inequality requires that Δ S = S( L) - | S( L - ℓ) - S( ℓ)| is nonnegative, where S( L) is the thermal entropy and S( L - ℓ), S( ℓ) are the entanglement entropies. Holographically there is an entanglement plateau in the BTZ black hole background, which means that there exists a critical length such that when ℓ ≤ ℓ c the inequality saturates Δ S =0. In thermal AdS background, the holographic entanglement entropy leads to Δ S = 0 for arbitrary ℓ. We compute the next-to-leading order contributions to Δ S in the large central charge CFT at both high and low temperatures. In both cases we show that Δ S is strictly positive except for ℓ = 0 or ℓ = L. This turns out to be true for any 2D CFT. In calculating the single interval entanglement entropy in a thermal state, we develop new techniques to simplify the computation. At a high temperature, we ignore the finite size correction such that the problem is related to the entanglement entropy of double intervals on a complex plane. As a result, we show that the leading contribution from a primary module takes a universal form. At a low temperature, we show that the leading thermal correction to the entanglement entropy from a primary module does not take a universal form, depending on the details of the theory.

  10. Bit Threads and Holographic Entanglement

    Science.gov (United States)

    Freedman, Michael; Headrick, Matthew

    2017-05-01

    The Ryu-Takayanagi (RT) formula relates the entanglement entropy of a region in a holographic theory to the area of a corresponding bulk minimal surface. Using the max flow-min cut principle, a theorem from network theory, we rewrite the RT formula in a way that does not make reference to the minimal surface. Instead, we invoke the notion of a "flow", defined as a divergenceless norm-bounded vector field, or equivalently a set of Planck-thickness "bit threads". The entanglement entropy of a boundary region is given by the maximum flux out of it of any flow, or equivalently the maximum number of bit threads that can emanate from it. The threads thus represent entanglement between points on the boundary, and naturally implement the holographic principle. As we explain, this new picture clarifies several conceptual puzzles surrounding the RT formula. We give flow-based proofs of strong subadditivity and related properties; unlike the ones based on minimal surfaces, these proofs correspond in a transparent manner to the properties' information-theoretic meanings. We also briefly discuss certain technical advantages that the flows offer over minimal surfaces. In a mathematical appendix, we review the max flow-min cut theorem on networks and on Riemannian manifolds, and prove in the network case that the set of max flows varies Lipshitz continuously in the network parameters.

  11. Mixed-level optical-system simulation incorporating component-level modeling of interface elements

    Science.gov (United States)

    Mena, Pablo V.; Stone, Bryan; Heller, Evan; Herrmann, Dan; Ghillino, Enrico; Scarmozzino, Rob

    2014-03-01

    While system-level simulation can allow designers to assess optical system performance via measures such as signal waveforms, spectra, eye diagrams, and BER calculations, component-level modeling can provide a more accurate description of coupling into and out of individual devices, as well as their detailed signal propagation characteristics. In particular, the system-level simulation of interface components used in optical systems, including splitters, combiners, grating couplers, waveguides, spot-size converters, and lens assemblies, can benefit from more detailed component-level modeling. Depending upon the nature of the device and the scale of the problem, simulation of optical transmission through these components can be carried out using either electromagnetic device-level simulation, such as the beampropagation method, or ray-based approaches. In either case, system-level simulation can interface to such componentlevel modeling via a suitable exchange of optical signal data. This paper presents the use of a mixed-level simulation flow in which both electromagnetic device-level and ray-based tools are integrated with a system-level simulation environment in order to model the use of various interface components in optical systems for a range of purposes, including, for example, coupling to and from optical transmission media such as single- and multimode optical fiber. This approach enables case studies on the impact of physical and geometric component variations on system performance, and the sensitivity of system behavior to misalignment between components.

  12. Optical Formation of Waveguide Elements in Photorefractive Surface Layer of a Lithium Niobate Sample

    Science.gov (United States)

    Bezpaly, A. D.; Shandarov, V. M.

    Formation of channel optical waveguides due to the sequential point-to-point exposure of local stripe-like regions of Y-cut lithium niobate sample surface is experimentally investigated. The surface layer of the sample is thermally doped with Cu ions to increase its photorefractive sensitivity. The laser radiation with wavelength of 532 nm and optical power of 10 mW is used for the crystal exposure in experiments. The optical inhomogeneities formed during the sample exposure are studied with their probing by laser beams with wavelength of 633 nm.

  13. Pattern-Recognition Processor Using Holographic Photopolymer

    Science.gov (United States)

    Chao, Tien-Hsin; Cammack, Kevin

    2006-01-01

    proposed joint-transform optical correlator (JTOC) would be capable of operating as a real-time pattern-recognition processor. The key correlation-filter reading/writing medium of this JTOC would be an updateable holographic photopolymer. The high-resolution, high-speed characteristics of this photopolymer would enable pattern-recognition processing to occur at a speed three orders of magnitude greater than that of state-of-the-art digital pattern-recognition processors. There are many potential applications in biometric personal identification (e.g., using images of fingerprints and faces) and nondestructive industrial inspection. In order to appreciate the advantages of the proposed JTOC, it is necessary to understand the principle of operation of a conventional JTOC. In a conventional JTOC (shown in the upper part of the figure), a collimated laser beam passes through two side-by-side spatial light modulators (SLMs). One SLM displays a real-time input image to be recognized. The other SLM displays a reference image from a digital memory. A Fourier-transform lens is placed at its focal distance from the SLM plane, and a charge-coupled device (CCD) image detector is placed at the back focal plane of the lens for use as a square-law recorder. Processing takes place in two stages. In the first stage, the CCD records the interference pattern between the Fourier transforms of the input and reference images, and the pattern is then digitized and saved in a buffer memory. In the second stage, the reference SLM is turned off and the interference pattern is fed back to the input SLM. The interference pattern thus becomes Fourier-transformed, yielding at the CCD an image representing the joint-transform correlation between the input and reference images. This image contains a sharp correlation peak when the input and reference images are matched. The drawbacks of a conventional JTOC are the following: The CCD has low spatial resolution and is not an ideal square

  14. Holographic superconductor with momentum relaxation and Weyl correction

    Directory of Open Access Journals (Sweden)

    Yi Ling

    2017-04-01

    Full Text Available We construct a holographic model with Weyl corrections in five dimensional spacetime. In particular, we introduce a coupling term between the axion fields and the Maxwell field such that the momentum is relaxed even in the probe limit in this model. We investigate the Drude behavior of the optical conductivity in low frequency region. It is interesting to find that the incoherent part of the conductivity is suppressed with the increase of the axion parameter k/T, which is in contrast to other holographic axionic models at finite density. Furthermore, we study the superconductivity associated with the condensation of a complex scalar field and evaluate the critical temperature for condensation in both analytical and numerical manner. It turns out that the critical temperature decreases with k˜, indicating that the condensation becomes harder in the presence of the axions, while it increases with Weyl parameter γ. We also discuss the change of the gap in optical conductivity with coupling parameters. Finally, we evaluate the charge density of the superfluid in zero temperature limit, and find that it exhibits a linear relation with σ˜DC(Tc˜Tc˜, such that a modified version of Homes' law is testified.

  15. Generation of Optical Vortex Arrays Using Single-Element Reversed-Wavefront Folding Interferometer

    Directory of Open Access Journals (Sweden)

    Brijesh Kumar Singh

    2012-01-01

    Full Text Available Optical vortex arrays have been generated using simple, novel, and stable reversed-wavefront folding interferometer. Two new interferometric configurations were used for generating a variety of optical vortex lattices. In the first interferometric configuration one cube beam splitter (CBS was used in one arm of Mach-Zehnder interferometer for splitting and combining the collimated beam, and one mirror of another arm is replaced by second CBS. At the output of interferometer, three-beam interference gives rise to optical vortex arrays. In second interferometric configuration, a divergent wavefront was made incident on a single CBS which splits and combines wavefronts leading to the generation of vortex arrays due to four-beam interference. It was found that the orientation and structure of the optical vortices can be stably controlled by means of changing the rotation angle of CBS.

  16. Weak scratch detection and defect classification methods for a large-aperture optical element

    Science.gov (United States)

    Tao, Xian; Xu, De; Zhang, Zheng-Tao; Zhang, Feng; Liu, Xi-Long; Zhang, Da-Peng

    2017-03-01

    Surface defects on optics cause optic failure and heavy loss to the optical system. Therefore, surface defects on optics must be carefully inspected. This paper proposes a coarse-to-fine detection strategy of weak scratches in complicated dark-field images. First, all possible scratches are detected based on bionic vision. Then, each possible scratch is precisely positioned and connected to a complete scratch by the LSD and a priori knowledge. Finally, multiple scratches with various types can be detected in dark-field images. To classify defects and pollutants, a classification method based on GIST features is proposed. This paper uses many real dark-field images as experimental images. The results show that this method can detect multiple types of weak scratches in complex images and that the defects can be correctly distinguished with interference. This method satisfies the real-time and accurate detection requirements of surface defects.

  17. Entanglement entropy and complexity for one-dimensional holographic superconductors

    Directory of Open Access Journals (Sweden)

    Mahdi Kord Zangeneh

    2017-08-01

    Full Text Available Holographic superconductor is an important arena for holography, as it allows concrete calculations to further understand the dictionary between bulk physics and boundary physics. An important quantity of recent interest is the holographic complexity. Conflicting claims had been made in the literature concerning the behavior of holographic complexity during phase transition. We clarify this issue by performing a numerical study on one-dimensional holographic superconductor. Our investigation shows that holographic complexity does not behave in the same way as holographic entanglement entropy. Nevertheless, the universal terms of both quantities are finite and reflect the phase transition at the same critical temperature.

  18. G-corrected holographic dark energy model

    CERN Document Server

    Malekjani, M

    2013-01-01

    Here we investigate the holographic dark energy model in the framework of FRW cosmology where the Newtonian gravitational constant,$G$, is varying with cosmic time. Using the complementary astronomical data which support the time dependency of $G$, the evolutionary treatment of EoS parameter and energy density of dark energy model are calculated in the presence of time variation of $G$. It has been shown that in this case, the phantom regime can be achieved at the present time. We also calculate the evolution of $G$- corrected deceleration parameter for holographic dark energy model and show that the dependency of $G$ on the comic time can influence on the transition epoch from decelerated expansion to the accelerated phase. Finally we perform the statefinder analysis for $G$- corrected holographic model and show that this model has a shorter distance from the observational point in $s-r$ plane compare with original holographic dark energy model.

  19. Surface counterterms and regularized holographic complexity

    Science.gov (United States)

    Yang, Run-Qiu; Niu, Chao; Kim, Keun-Young

    2017-09-01

    The holographic complexity is UV divergent. As a finite complexity, we propose a "regularized complexity" by employing a similar method to the holographic renor-malization. We add codimension-two boundary counterterms which do not contain any boundary stress tensor information. It means that we subtract only non-dynamic back-ground and all the dynamic information of holographic complexity is contained in the regularized part. After showing the general counterterms for both CA and CV conjectures in holographic spacetime dimension 5 and less, we give concrete examples: the BTZ black holes and the four and five dimensional Schwarzschild AdS black holes. We propose how to obtain the counterterms in higher spacetime dimensions and show explicit formulas only for some special cases with enough symmetries. We also compute the complexity of formation by using the regularized complexity.

  20. Holographic equipartition and the maximization of entropy

    Science.gov (United States)

    Krishna, P. B.; Mathew, Titus K.

    2017-09-01

    The accelerated expansion of the Universe can be interpreted as a tendency to satisfy holographic equipartition. It can be expressed by a simple law, Δ V =Δ t (Nsurf-ɛ Nbulk) , where V is the Hubble volume in Planck units, t is the cosmic time in Planck units, and Nsurf /bulk is the number of degrees of freedom on the horizon/bulk of the Universe. We show that this holographic equipartition law effectively implies the maximization of entropy. In the cosmological context, a system that obeys the holographic equipartition law behaves as an ordinary macroscopic system that proceeds to an equilibrium state of maximum entropy. We consider the standard Λ CDM model of the Universe and show that it is consistent with the holographic equipartition law. Analyzing the entropy evolution, we find that it also proceeds to an equilibrium state of maximum entropy.

  1. Some applications of holographic interferometry in biomechanics

    Science.gov (United States)

    Ebbeni, Jean P. L.

    1992-03-01

    Holographic interferometry is well adapted for the determination of 2D strain fields in osseous structures. The knowledge of those strain fields is important for the understanding of structure behavior such as arthrosis.

  2. Entropy Bounds, Holographic Principle and Uncertainty Relation

    Directory of Open Access Journals (Sweden)

    I. V. Volovich

    2001-06-01

    Full Text Available Abstract: A simple derivation of the bound on entropy is given and the holographic principle is discussed. We estimate the number of quantum states inside space region on the base of uncertainty relation. The result is compared with the Bekenstein formula for entropy bound, which was initially derived from the generalized second law of thermodynamics for black holes. The holographic principle states that the entropy inside a region is bounded by the area of the boundary of that region. This principle can be called the kinematical holographic principle. We argue that it can be derived from the dynamical holographic principle which states that the dynamics of a system in a region should be described by a system which lives on the boundary of the region. This last principle can be valid in general relativity because the ADM hamiltonian reduces to the surface term.

  3. Fischler-Susskind holographic cosmology revisited

    OpenAIRE

    Diaz, Pablo; Per, M. A.; Segui, Antonio

    2007-01-01

    When Fischler and Susskind proposed a holographic prescription based on the Particle Horizon, they found that spatially closed cosmological models do not verify it due to the apparently unavoidable recontraction of the Particle Horizon area. In this article, after a short review of their original work, we expose graphically and analytically that spatially closed cosmological models can avoid this problem if they expand fast enough. It has been also shown that the Holographic Principle is satu...

  4. Strongly interacting matter from holographic QCD model

    Directory of Open Access Journals (Sweden)

    Chen Yidian

    2016-01-01

    Full Text Available We introduce the 5-dimension dynamical holographic QCD model, which is constructed in the graviton-dilaton-scalar framework with the dilaton background field Φ and the scalar field X responsible for the gluodynamics and chiral dynamics, respectively. We review our results on the hadron spectra including the glueball and light meson spectra, QCD phase transitions and transport properties in the framework of the dynamical holographic QCD model.

  5. High-speed inline holographic Stokesmeter imaging.

    Science.gov (United States)

    Liu, Xue; Heifetz, Alexander; Tseng, Shih C; Shahriar, M S

    2009-07-01

    We demonstrate a high-speed inline holographic Stokesmeter that consists of two liquid crystal retarders and a spectrally selective holographic grating. Explicit choices of angles of orientation for the components in the inline architecture are identified to yield higher measurement accuracy than the classical architecture. We show polarimetric images of an artificial scene produced by such a Stokesmeter, demonstrating the ability to identify an object not recognized by intensity-only imaging systems.

  6. Soft wall model for a holographic superconductor

    Energy Technology Data Exchange (ETDEWEB)

    Afonin, S.S.; Pusenkov, I.V. [Saint Petersburg State University, St.Petersburg (Russian Federation)

    2016-06-15

    We consider the soft wall holographic approach for description of the high-T{sub c} superconductivity. In comparison with the existing bottom-up holographic superconductors, the proposed approach is more phenomenological and does not describe the superconducting phase transition. On the other hand, technically it is simpler and has more freedom for fitting the conductivity properties of the real high-T{sub c} materials in the superconducting phase. Some examples of emerging models are analyzed. (orig.)

  7. History Of Holographic Display In Japan

    Science.gov (United States)

    Iwata, Fujio

    1987-06-01

    The first exhibition of holographic display was held at Seibu Museum of Art in Tokyo in 1975 and played a role of opening of the holographic era in Japan. This exhibition and the next big exhibition of holography held at Isetan department store 3 years later in 1978 were really epoch-making facts on holographic display in Japan. Since these two exhibitions, holographic display in Japan has come to attract attention of a lot of people to the new display media, holography. At that time, mass production technology of holograms had not been fully developed yet, and the hologram was so expensive that they were found only at the big event. Some companies and universities still continued research and development to have holograms get into practical applications of display media. Few years later, people became interested in 3-D displays and sometimes many peoples took an interest in holographic display, mainly mass produced embossed type holograms applied to the field of publications, book and magazine, etc. 3-D display booms occurred in the year of Tsukuba Science Expo'85 in 1985 and embossed type hologram became much popular. History of holographic display of Japan in terms of technical development and practical use on laser reconstruction hologram, rainbow hologram, multiplex hologram and lippmann hologram will be introduced.

  8. Deuteron NMR study of molecular ordering in a holographic-polymer-dispersed liquid crystal.

    Science.gov (United States)

    Vilfan, Marija; Zalar, Bostjan; Fontecchio, Adam K; Vilfan, Mojca; Escuti, Michael J; Crawford, Gregory P; Zumer, Slobodan

    2002-08-01

    Using deuteron nuclear magnetic resonance (NMR) and dynamic light scattering, we study the orientational order and dynamics of a BL038-5CB liquid-crystal mixture in a holographic polymer dispersed liquid-crystal material (HPDLC) as used for switchable diffractive optical elements. At high temperatures, where the liquid crystal is predominantly in the isotropic phase, the HPDLC deuteron NMR linewidth and transverse spin-relaxation rate T-12 are two orders of magnitude larger than in the bulk. The analysis shows that the surface-induced order parameter in HPDLC is significantly larger than in similar confining systems and that translational diffusion of molecules in the surface layer is at least two orders of magnitude slower than in the rest of the cavity. The unusual temperature dependence of T-12 upon cooling suggests the possibility of a partial separation of the 5CB component in the liquid-crystal mixture. The onset of the nematic phase in HPDLC occurs at considerably lower temperature than in the bulk and takes place gradually due to different sizes and different content of non-liquid-crystalline ingredients in droplets. Parts of the droplets are found isotropic even at room temperature and the structure of the nematic director field in the droplets is only slightly anisotropic. We point out the capability of NMR to detect the actual state of liquid-crystalline order in HPDLCs and to contribute in this way to the improvement of the switching efficiency of diffraction gratings.

  9. Mass production of volume phase holographic gratings for the VIRUS spectrograph array

    Science.gov (United States)

    Chonis, Taylor S.; Frantz, Amy; Hill, Gary J.; Clemens, J. Christopher; Lee, Hanshin; Tuttle, Sarah E.; Adams, Joshua J.; Marshall, J. L.; DePoy, D. L.; Prochaska, Travis

    2014-07-01

    The Visible Integral-field Replicable Unit Spectrograph (VIRUS) is a baseline array of 150 copies of a simple, fiber-fed integral field spectrograph that will be deployed on the Hobby-Eberly Telescope (HET). VIRUS is the first optical astronomical instrument to be replicated on an industrial scale, and represents a relatively inexpensive solution for carrying out large-area spectroscopic surveys, such as the HET Dark Energy Experiment (HETDEX). Each spectrograph contains a volume phase holographic (VPH) grating with a 138 mm diameter clear aperture as its dispersing element. The instrument utilizes the grating in first-order for 350 VPH gratings has been mass produced for VIRUS. Here, we present the design of the VIRUS VPH gratings and a discussion of their mass production. We additionally present the design and functionality of a custom apparatus that has been used to rapidly test the first-order diffraction efficiency of the gratings for various discrete wavelengths within the VIRUS spectral range. This device has been used to perform both in-situ tests to monitor the effects of adjustments to the production prescription as well as to carry out the final acceptance tests of the gratings' diffraction efficiency. Finally, we present the as-built performance results for the entire suite of VPH gratings.

  10. Universal Three-Qubit Entanglement Generation Based on Linear Optical Elements and Quantum Non-Demolition Detectors

    Science.gov (United States)

    Liu, Xin-Chang

    2017-02-01

    Recently, entanglement plays an important role in quantum information science. Here we propose an efficient and applicable method which transforms arbitrary three-qubit unknown state to a maximally entangled Greenberger-Horne-Zeilinger state, and the proposed method could be further generalized to multi-qubit case. The proposed setup exploits only linear optical elements and quantum non-demolition detectors using cross-Kerr media. As the quantum non-demolition detection could reveal us the output state of the photons without destroying them. This property may make our proposed setup flexible and can be widely used in current quantum information science and technology.

  11. Soft Pomeron in Holographic QCD

    CERN Document Server

    Ballon-Bayona, Alfonso; Costa, Miguel S; Djurić, Marko

    2016-01-01

    We study the graviton Regge trajectory in Holographic QCD as a model for high energy scattering processes dominated by soft pomeron exchange. This is done by considering spin J fields from the closed string sector that are dual to glueball states of even spin and parity. In particular, we construct a model that governs the analytic continuation of the spin J field equation to the region of real J < 2, which includes the scattering domain of negative Maldelstam variable t. The model leads to approximately linear Regge trajectories and is compatible with the measured values of 1.08 for the intercept and 0.25 GeV$^{-2}$ for the slope of the soft pomeron. The intercept of the secondary pomeron trajectory is in the same region of the subleading trajectories, made of mesons, proposed by Donnachie and Landshoff, and should therefore be taken into account.

  12. Note on subregion holographic complexity

    Science.gov (United States)

    Roy, Pratim; Sarkar, Tapobrata

    2017-07-01

    The volume inside a Ryu-Takayanagi surface has been conjectured to be related to the complexity of subregions of the boundary field theory. Here, we study the behavior of this volume analytically, when the entangling surface has a strip geometry. We perform systematic expansions in the low- and high-temperature regimes for AdS-Schwarzschild and RN-AdS black holes. In the latter regime, we point out spurious divergences that might occur due to the limitations of a near horizon expansion. A similar analysis is performed for extremal black holes and, at large charge, we find that there might be some new features of the volume as compared to the area. Finally, we numerically study a four-dimensional RN-AdS black hole in global AdS, the entangling surface being a sphere. We find that the holographic complexity captures essentially the same information as the entanglement entropy, as far as phase transitions are concerned.

  13. Emergent Spacetime and Holographic CFTs

    CERN Document Server

    El-Showk, Sheer

    2012-01-01

    We discuss universal properties of conformal field theories with holographic duals. A central feature of these theories is the existence of a low-lying sector of operators whose correlators factorize. We demonstrate that factorization can only hold in the large central charge limit. Using conformal invariance and factorization we argue that these operators are naturally represented as fields in AdS as this makes the underlying linearity of the system manifest. In this class of CFTs the solution of the conformal bootstrap conditions can be naturally organized in structures which coincide with Witten diagrams in the bulk. The large value of the central charge suggests that the theory must include a large number of new operators not captured by the factorized sector. Consequently we may think of the AdS hologram as an effective representation of a small sector of the CFT, which is embedded inside a much larger Hilbert space corresponding to the black hole microstates.

  14. COMPARISON OF HOLOGRAPHIC AND ITERATIVE METHODS FOR AMPLITUDE OBJECT RECONSTRUCTION

    Directory of Open Access Journals (Sweden)

    I. A. Shevkunov

    2015-01-01

    Full Text Available Experimental comparison of four methods for the wavefront reconstruction is presented. We considered two iterative and two holographic methods with different mathematical models and algorithms for recovery. The first two of these methods do not use a reference wave recording scheme that reduces requirements for stability of the installation. A major role in phase information reconstruction by such methods is played by a set of spatial intensity distributions, which are recorded as the recording matrix is being moved along the optical axis. The obtained data are used consistently for wavefront reconstruction using an iterative procedure. In the course of this procedure numerical distribution of the wavefront between the planes is performed. Thus, phase information of the wavefront is stored in every plane and calculated amplitude distributions are replaced for the measured ones in these planes. In the first of the compared methods, a two-dimensional Fresnel transform and iterative calculation in the object plane are used as a mathematical model. In the second approach, an angular spectrum method is used for numerical wavefront propagation, and the iterative calculation is carried out only between closely located planes of data registration. Two digital holography methods, based on the usage of the reference wave in the recording scheme and differing from each other by numerical reconstruction algorithm of digital holograms, are compared with the first two methods. The comparison proved that the iterative method based on 2D Fresnel transform gives results comparable with the result of common holographic method with the Fourier-filtering. It is shown that holographic method for reconstructing of the object complex amplitude in the process of the object amplitude reduction is the best among considered ones.

  15. The microwave induced plasma with optical emission spectrometry (MIP-OES) in 23 elements determination in geological samples.

    Science.gov (United States)

    Niedzielski, P; Kozak, L; Wachelka, M; Jakubowski, K; Wybieralska, J

    2015-01-01

    The article presents the optimisation, validation and application of the microwave induced plasma optical emission spectrometry (MIP-OES) dedicated for a routine determination of Ag, Al, B, Ba, Bi, Ca, Cd, Cr, Cu, Fe, Ga, In, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Sr, Tl, Zn, in the geological samples. The three procedures of sample preparation has been proposed: sample digestion with the use of hydrofluoric acid for determination of total concentration of elements, extraction by aqua regia for determination of the quasi-total element concentration and extraction by hydrochloric acid solution to determine contents of the elements in acid leachable fraction. The detection limits were on the level 0.001-0.121 mg L(-1) (from 0.010-0.10 to 1.2-12 mg kg(-1) depend on the samples preparation procedure); the precision: 0.20-1.37%; accuracy 85-115% (for recovery for certified standards materials analysis and parallel analysis by independent analytical techniques: X-ray fluorescence (XRF) and flame absorption spectrometry (FAAS)). The conformity of the results obtained by MIP-OES analytical procedures with the results obtained by XRF and FAAS analysis allows to propose the procedures for studies of elemental composition of the fraction of the geological samples. Additionally, the MIP-OES technique is much less expensive than ICP techniques and much less time-consuming than AAS techniques. Copyright © 2014 Elsevier B.V. All rights reserved.

  16. Capabilities and challenges in transferring the wavefront-based alignment approach to small aperture multi-element optical systems

    Science.gov (United States)

    Krappig, Reik; Schmitt, Robert

    2017-02-01

    Present alignment methods already have an accuracy of some microns, allowing in general the fairly precise assembly of multi element optical systems. Nevertheless, they suffer decisive drawbacks, such as the necessity of an iterative process, stepping through all optical surfaces of the system when using autocollimation telescopes. In contrast to these limitations, the wavefront based alignment offers an elegant approach to potentially reach sub-µm accuracy in the alignment within a highly efficient process, that simultaneously acquires and evaluates the best optical solution possible. However, the practical use of these capabilities in corresponding alignment devices needs to take real sensor behavior into account. This publication will especially elaborate on the influence of the sensor properties in relation to the alignment process. The first dominant requirement is a highly stable measurement, since tiny perturbations in the optical system will have an also tiny influence on the wavefront. Secondly, the lateral sampling of the measured wavefront is supposed to be as high as possible, in order to be able to extract higher order Zernike coefficients reliable. The resulting necessity of using the largest sensor area possible conflicts with the requirement to allow a certain lateral displacement of the measured spot, indicating a perturbation. A movement of the sensor with suitable stages in turn leads to additional uncertainties connected to the actuators. Further factors include the SNR-ratio of the sensor as well as multiple measurements, in order to improve data repeatability. This publication will present a procedure of dealing with these relevant influence factors. Depending on the optical system and its properties the optimal adjustment of these parameters is derived.

  17. Experimental verification of sub-wavelength holographic lithography physical concept for single exposure fabrication of complex structures on planar and nonplanar surfaces

    Science.gov (United States)

    Borisov, Michael V.; Chelyubeev, Dmitry A.; Chernik, Vitaly V.; Miheev, Peter A.; RakhovskiÑ-, Vadim I.; Shamaev, Alexei S.

    2017-06-01

    Authors of the report have been developing Sub-Wavelength Holographic Lithography (SWHL) methods of aerial image creation for IC layer topologies for the last several years. Sub-wavelength holographic masks (SWHM) have a number of substantial advantages in comparison with the traditional masks, which are used in projection photo-microlithography. The main advantages: there is no one-to-one correspondence between mask and image elements thus the effect of local mask defects almost completely eliminated [1]; holographic mask may consist of single-tipe elements with typical size many times bigger than projection mask elements [2]; technological methods of image quality optimization can be replaced by virtual routines in the process of the holographic mask calculating, that simplifies mask manufacturing and dramatically reduces the mask cost [3]; imaging via holographic mask does not need the projection lens, that significantly simplifies photolithographic tool and reduces ones cost. Our group developed effective methods of holographic mask synthesis and of aerial images modelling and created software package. This methods and calculation results were verified and reported many times [1-3].

  18. Experimental and statistical models of impact determination of the electron beam parameters on surface layers properties of optical elements in precision instruments building

    Directory of Open Access Journals (Sweden)

    I.V. Yatsenko

    2016-05-01

    Full Text Available Modern devices with optical elements for measurement and thermal control of different physical nature objects subjected to intense external thermal actions. To prevent destruction of optical elements the electron beam methods of work surfaces finishing at the stage of manufacture has practical significance. These methods can improve the properties of the element surface layers and thus make them more resistant to external thermal and mechanical action. Aim: The aim is to determine the optimal ranges of parameters of the electron beam and the development of experimental and statistical models that will automatically generate database with improved properties of the surface layers of optical elements in real time mode after previous electron beam treatment. Materials and Methods: To study the influence of parameters of the electron beam on the properties of the surface layers of the optical elements used plates of optical glass (K8, K108, etc. and ceramics (KO1, KO2, etc.. The strip electron beam has the following characteristics: density of heat flow Fn = 5∙10^6…9∙10^8 W/m2 and rate of displacement V = 0…0.1 m/s. Determination of the surface layers properties of the optical elements before and after electron beam treatment was carried out by known methods of physical and chemical analysis. Results: It was established that under the influence of the electron beam on the surface of the optical element there is visible clearing of various impurities take place, various micro-defects that remain on it after standard processing methods (mechanical, chemical, etc. remove and also its smoothness significantly increases, i.e. height of residual asperities on the surface is reduced. It was also found that the processing of optical glass elements by electron beam their surface layers change their structure, which is close to the quartz. It is shown that the surface of the preprocessed electron beam elements able to withstand the critical value of

  19. Physics and technology of optical storage in polymer thin films

    DEFF Research Database (Denmark)

    Ramanujam, P.S.; Hvilsted, Søren; Ujhelyi, F.

    2001-01-01

    We discuss different strategies for optical storage of information in polymeric films. An outline of the existing trends is given. The synthesis and characterization of side-chain azobenzene polyester films for holographic storage of information is described. A compact holographic memory card sys...

  20. Demonstration of a novel dispersive spectral splitting optical element for cost- effective photovoltaic conversion

    CERN Document Server

    Maragliano, Carlo; Bronzoni, Matteo; Rampino, Stefano; Fitzgerald, Eugene A; Chiesa, Matteo; Stefancich, Marco

    2015-01-01

    In this letter we report the preliminary validation of a low-cost paradigm for photovoltaic power generation that utilizes a prismatic Fresnel-like lens to simultaneously concentrate and separate sunlight into continuous laterally spaced spectral bands, which are then fed into spectrally matched single-junction photovoltaic cells. A prismatic lens was designed using geometric optics and the dispersive properties of the employed material, and its performance was simulated with a ray- tracing software. After device optimization, it was fabricated by injection molding, suitable for large-scale mass production. We report an average optical transmittance of ~ 90% over the VNIR range with spectral separation in excellent agreement with our simulations. Finally, two prototype systems were tested: one with GaAsP and c-Si photovoltaic devices and one with a pair of copper indium gallium selenide based solar cells. The systems demonstrated an increase in peak electrical power output of 51% and 64% respectively under wh...

  1. Multi-Element Free-Space Optical (FSO) Modules for Mobile-Opportunistic Networking

    Science.gov (United States)

    2016-11-14

    Workshops (ICC). 23-MAY-16, Kuala Lumpur, Malaysia . : , . Autonomous Alignment of Free-Space-Optical Links Between UAVs, ACM MobiCom Workshop on...the robot car, the steerable head, the IR transceiver circuit, the IR transmitter and the IR receiver will be used to make a single piece of equipment...attached on top of the robot car. A servo motor will be used to steer the head. The IR transmitter and IR receiver will be placed on the steerable head

  2. Quantum teleportation of an arbitrary two-mode coherent state using only linear optics elements

    Energy Technology Data Exchange (ETDEWEB)

    Ho Ngoc Phien [Physics Department, University of Sciences, Hue (Viet Nam); Nguyen Ba An [Center for Theoretical Physics, Institute of Physics and Electronics, 10 Dao Tan, Thu Le, Ba Dinh, Hanoi (Viet Nam); School of Computational Sciences, Korea Institute for Advanced Study, 207-43 Cheongryangni 2-dong, Dongdaemun-gu, Seoul 130-722 (Korea, Republic of)], E-mail: nban@iop.vast.ac.vn

    2008-04-14

    We propose a linear optics scheme to teleport an arbitrary two-mode coherent state. The devices used are beam-splitters, phase-shifters and ideal photo-detectors capable of distinguishing between even and odd photon numbers. The scheme achieves faithful teleportation with a probability of 1/4. However, with additional use of an appropriate displacement operator, the teleported state can always be made near-faithful.

  3. Self-interference digital holographic microscopy for live cell imaging

    Science.gov (United States)

    Kemper, Björn; Dartmann, Sebastian; Schlichthaber, Frank; Vollmer, Angelika; Ketelhut, Steffi; von Bally, Gert

    2012-06-01

    Quantitative digital holographic multi-focus phase imaging enables label-free minimally invasive live cell analysis by high resolution detection of sample induced optical path length changes. However, a drawback of many experimental arrangements for the analysis of living cells with digital holography is the requirement for a separate reference wave which results in a phase stability decrease and the demand for a precise adjustment of the intensity ratio between object and reference wave. Thus, a self interference digital holographic microscopy (DHM) approach was explored which only requires a single object illumination wave. Due to the Michelson interferometer design of the proposed experimental setup two wave fronts with an almost identical curvature are superimposed. This results in a simplified evaluation of the digital holograms. The applicability of the proposed self interference principle is illustrated by results from a technical specimen and living single cells. Furthermore, adherent cancer cells have been analyzed for morphology changes in perfusion chambers due to flow and the refractive index of suspended cells was determined. In summary, the method prospects to be a versatile tool for quantitative phase imaging as simplification is important for the establishment of these methods in live cell analysis.

  4. Holographic images reconstructed from GMR-based fringe pattern

    Directory of Open Access Journals (Sweden)

    Kikuchi Hiroshi

    2013-01-01

    Full Text Available We have developed a magneto-optical spatial light modulator (MOSLM using giant magneto-resistance (GMR structures for realizing a holographic three-dimensional (3D display. For practical applications, reconstructed image of hologram consisting of GMR structures should be investigated in order to study the feasibility of the MOSLM. In this study, we fabricated a hologram with GMR based fringe-pattern and demonstrated a reconstructed image. A fringe-pattern convolving a crossshaped image was calculated by a conventional binary computer generated hologram (CGH technique. The CGH-pattern has 2,048 × 2,048 with 5 μm pixel pitch. The GMR stack consists of a Tb-Fe-Co/CoFe pinned layer, a Ag spacer, a Gd-Fe free layer for light modulation, and a Ru capping layer, was deposited by dc-magnetron sputtering. The GMR hologram was formed using photo-lithography and Krion milling processes, followed by the deposition of a Tb-Fe-Co reference layer with large coercivity and the same Kerr-rotation angle compared to the free layer, and a lift-off process. The reconstructed image of the ON-state was clearly observed and successfully distinguished from the OFF-state by switching the magnetization direction of the free-layer with an external magnetic field. These results indicate the possibility of realizing a holographic 3D display by the MOSLM using the GMR structures.

  5. High density collinear holographic data storage system (Conference Presentation)

    Science.gov (United States)

    Tan, Xiaodi; Horimai, Hideyoshi; Arai, Ryo; Ikeda, Junichi; Inoue, Mitsuteru; Lin, Xiao; Xu, Ke; Liu, Jinpeng; Huang, Yong

    2016-09-01

    Collinear holography has been good candidate for a volumetric recording technology of holographic data storage system (HDSS), because of there are not only large storage capacities, high transfer rates, but also the unique configuration, in which the information and reference beams are modulated co-axially by the same spatial light modulator, as a new read/write method for HDSS are very promising. The optical pickup can be designed as small as DVDs, and can be placed on one side of the recording media (disc). In the disc structure, the preformatted reflective layer is used for the focus/tracking servo and reading address information, and a dichroic mirror layer is used for detecting holographic recording information without interfering with the preformatted information. A 2-dimensional digital page data format is used and the shift-multiplexing method is employed to increase recording density. As servo technologies are being introduced to control the objective lens to be maintained precisely to the disc in the recording and reconstructing process, a vibration isolator is no longer necessary. In this paper, we introduced the principle of the collinear holography and its media structure of disc. Some results of experimental and theoretical studies suggest that it is a very effective method. We also discussed some methods to increase the recording density and data transfer rates of collinear holography using phase modulated page data format.

  6. Holographic response from higher derivatives with homogeneous disorder

    Directory of Open Access Journals (Sweden)

    Guoyang Fu

    2017-06-01

    Full Text Available In this letter, we study the charge response from higher derivatives over the background with homogeneous disorder introduced by axions. We first explore the bounds on the higher derivatives coupling from DC conductivity and the anomalies of causality and instabilities. Our results indicate no tighter constraints on the coupling than that over Schwarzschild–AdS (SS–AdS background. And then we study the optical conductivity of our holographic system. We find that for the case with γ1<0 and the disorder strength αˆ<2/3, there is a crossover from a coherent to incoherent metallic phase as αˆ increases. When αˆ is beyond αˆ=2/3 and further amplified, a peak exhibits again at low frequency. But it cannot be well fitted by the standard Drude formula and new formula for describing this behavior shall be called for. While for the holographic system with the limit of γ1→1/48, the disorder effect drives the hard-gap-like at low frequency into the soft gap and suppresses the pronounced peak at medium frequency.

  7. Holographic images reconstructed from GMR-based fringe pattern

    Science.gov (United States)

    Kato, Daisuke; Aoshima, Kenichi; Machida, Kenji; Emoto, Akira; Kinjo, Hidekazu; Kuga, Kiyoshi; Ono, Hiroshi; Ishibashi, Takayuki; Kikuchi, Hiroshi; Shimidzu, Naoki

    2013-01-01

    We have developed a magneto-optical spatial light modulator (MOSLM) using giant magneto-resistance (GMR) structures for realizing a holographic three-dimensional (3D) display. For practical applications, reconstructed image of hologram consisting of GMR structures should be investigated in order to study the feasibility of the MOSLM. In this study, we fabricated a hologram with GMR based fringe-pattern and demonstrated a reconstructed image. A fringe-pattern convolving a crossshaped image was calculated by a conventional binary computer generated hologram (CGH) technique. The CGH-pattern has 2,048 × 2,048 with 5 μm pixel pitch. The GMR stack consists of a Tb-Fe-Co/CoFe pinned layer, a Ag spacer, a Gd-Fe free layer for light modulation, and a Ru capping layer, was deposited by dc-magnetron sputtering. The GMR hologram was formed using photo-lithography and Krion milling processes, followed by the deposition of a Tb-Fe-Co reference layer with large coercivity and the same Kerr-rotation angle compared to the free layer, and a lift-off process. The reconstructed image of the ON-state was clearly observed and successfully distinguished from the OFF-state by switching the magnetization direction of the free-layer with an external magnetic field. These results indicate the possibility of realizing a holographic 3D display by the MOSLM using the GMR structures.

  8. MEGARA Optics: stain removal in PBM2Y prisms

    Science.gov (United States)

    Aguirre-Aguirre, D.; Izazaga-Pérez, R.; Villalobos-Mendoza, B.; Carrasco, E.; Gil de Paz, A.; Gallego, J.; Iglesias, J.

    2017-01-01

    MEGARA is the new integral-field and multi-object optical spectrograph for the GTC. For medium and high resolution, the dispersive elements are volume phase holographic gratings, sandwiched between two flat windows and two prisms of high optical precision. The prisms are made of Ohara PBM2Y optical glass. After the prisms polishing process, some stains appeared on the surfaces. For this, in this work is shown the comparative study of five different products (muriatic acid, paint remover, sodium hydroxide, aqua regia and rare earth liquid polish) used for trying to eliminate the stains of the HR MEGARA prisms. It was found that by polishing with the hands the affected area, and using a towel like a kind of pad, and polish during five minutes using rare earth, the stains disappear completely affecting only a 5% the rms of the surface quality. Not so the use of the other products that did not show any apparent result.

  9. Analysis of holographic data storage using a PA-LCoS device

    OpenAIRE

    Martínez Guardiola, Francisco Javier; Márquez, Andrés; Gallego, Sergi; Fenoll Gambín, Sandra; Ortuño, Manuel; Francés, Jorge; Bleda, Sergio; Pascual, Inmaculada

    2016-01-01

    Holographic data storage systems (HDSS) have been a promising and very appealing technology since the first laser developments in the sixties. Impact of ongoing advances in the various components needs to be explored in its specific application to HDSS. In this sense, continuous progress is being produced in spatial light modulator (SLM) technology where parallel-addressed liquid crystal on silicon (PA-LCoS) microdisplays have replaced previous liquid-crystal displays (LCD) in most of optics ...

  10. Application Of Holographic Interferometry For Investigation Of Microroughness Of Engineering Surfaces

    Science.gov (United States)

    Lech, Marek; Mruk, Irena; Stupnicki, Jacek

    1985-01-01

    The paper describes an improved immersion method of holographic interferometry /IMHI/ adjusted for studies of roughness of engineering surfaces. Special optical arrangement, with two types of immersion cells and adequate technique of preparing transparent replicas reproducting with high fidelity details of differently machined surfaces was elaborated. It permits to obtain the contour maps of the surface asperities with intervals between the planes of succesive contour lines within a range of 1 μm. The results obtained for some engineering surfaces are given.

  11. Real-time three-dimensional counting and shape measurement of RBCs using digital holographic cytometry

    Science.gov (United States)

    Funamizu, Hideki; Sonoda, Kotaro; Goto, Ryoji; Aizu, Yoshihisa

    2017-04-01

    Digital holography is a useful technique for recording and reconstruction of the complex amplitude of an optical field. In this technique, an interference pattern of two waves is detected by an image sensor, and digital holograms are acquired in computer. The wavefront is reconstructed by a numerical calculation. In this study, we present the real-time threedimensional counting and shape measurement of RBCs using flow cytometry with digital holographic microscopy.

  12. Applications of optical fibers and miniature photonic elements in medical diagnostics

    Science.gov (United States)

    Blaszczak, Urszula; Gilewski, Marian; Gryko, Lukasz; Zajac, Andrzej; Kukwa, Andrzej; Kukwa, Wojciech

    2014-05-01

    Construction of endoscopes which are known for decades, in particular in small devices with the diameter of few millimetres, are based on the application of fibre optic imaging bundles or bundles of fibers in the illumination systems (usually with a halogen source). Cameras - CCD and CMOS - with the sensor size of less than 5 mm emerging commercially and high power LED solutions allow to design and construct modern endoscopes characterized by many innovative properties. These constructions offer higher resolution. They are also relatively cheaper especially in the context of the integration of the majority of the functions on a single chip. Mentioned features of the CMOS sensors reduce the cycle of introducing the newly developed instruments to the market. The paper includes a description of the concept of the endoscope with a miniature camera built on the basis of CMOS detector manufactured by Omni Vision. The set of LEDs located at the operator side works as the illuminating system. Fibre optic system and the lens of the camera are used in shaping the beam illuminating the observed tissue. Furthermore, to broaden the range of applications of the endoscope, the illuminator allows to control the spectral characteristics of emitted light. The paper presents the analysis of the basic parameters of the light-and-optical system of the endoscope. The possibility of adjusting the magnifications of the lens, the field of view of the camera and its spatial resolution is discussed. Special attention was drawn to the issues related to the selection of the light sources used for the illumination in terms of energy efficiency and the possibility of providing adjusting the colour of the emitted light in order to improve the quality of the image obtained by the camera.

  13. Optical characterization of photopolymer and photoresist materials for storage, sensing, and security applications

    Science.gov (United States)

    Feid, Timo; Frohmann, Sven; Rass, Jens; Müller, Christian; Orlic, Susanna

    2008-08-01

    Diffractive optical elements with application specific tailored properties can be fabricated by light induced alternation of the material's refractive index. Holographic polymers or photoresists are typically used for permanent optical structurization. Today, photostructurable media become core elements of photonic systems with innovative capabilities. We investigate different classes of organic photosensitive materials in order to optimize the interaction between the material and an optoelectronic system around. Some exemplary applications are microholographic data storage, 3D nano/micro structurization, optical patterning for advanced security features. Key issues include dynamic material response, spectral and temporal grating development, influence of the light intensity distribution, effects of pre-exposure and post-curing, etc. Materials under investigation are cationic and free radical polymerization systems, liquid crystalline polymer nanocomposites, and photoresist systems.

  14. Holographic complexity and fidelity susceptibility as holographic information dual to different volumes in AdS

    Directory of Open Access Journals (Sweden)

    N.S. Mazhari

    2017-03-01

    Full Text Available The holographic complexity and fidelity susceptibility have been defined as new quantities dual to different volumes in AdS. In this paper, we will use these new proposals to calculate both of these quantities for a variety of interesting deformations of AdS. We obtain the holographic complexity and fidelity susceptibility for an AdS black hole, Janus solution, a solution with cylindrical symmetry, an inhomogeneous background and a hyperscaling violating background. It is observed that the holographic complexity depends on the size of the subsystem for all these solutions and the fidelity susceptibility does not have any such dependence.

  15. Holographic complexity and fidelity susceptibility as holographic information dual to different volumes in AdS

    Energy Technology Data Exchange (ETDEWEB)

    Mazhari, N.S., E-mail: najmemazhari86@gmail.com [Eurasian International Center for Theoretical Physics and Department of General & Theoretical Physics, Eurasian National University, Astana 010008 (Kazakhstan); Momeni, Davood, E-mail: davoodmomeni78@gmail.com [Eurasian International Center for Theoretical Physics and Department of General & Theoretical Physics, Eurasian National University, Astana 010008 (Kazakhstan); Bahamonde, Sebastian, E-mail: sebastian.beltran.14@ucl.ac.uk [Department of Mathematics, University College London, Gower Street, London, WC1E 6BT (United Kingdom); Faizal, Mir, E-mail: mirfaizalmir@googlemail.com [Irving K. Barber School of Arts and Sciences, University of British Columbia - Okanagan, 3333 University Way, Kelowna, British Columbia, V1V 1V7 (Canada); Department of Physics and Astronomy, University of Lethbridge, Lethbridge, Alberta, T1K 3M4 (Canada); Myrzakulov, Ratbay, E-mail: rmyrzakulov@gmail.com [Eurasian International Center for Theoretical Physics and Department of General & Theoretical Physics, Eurasian National University, Astana 010008 (Kazakhstan)

    2017-03-10

    The holographic complexity and fidelity susceptibility have been defined as new quantities dual to different volumes in AdS. In this paper, we will use these new proposals to calculate both of these quantities for a variety of interesting deformations of AdS. We obtain the holographic complexity and fidelity susceptibility for an AdS black hole, Janus solution, a solution with cylindrical symmetry, an inhomogeneous background and a hyperscaling violating background. It is observed that the holographic complexity depends on the size of the subsystem for all these solutions and the fidelity susceptibility does not have any such dependence.

  16. Theta dependence in holographic QCD

    Energy Technology Data Exchange (ETDEWEB)

    Bartolini, Lorenzo [Dipartimento di Fisica “E. Fermi' , Università di Pisa and INFN, Sezione di Pisa,Largo B. Pontecorvo 3, I-56127 Pisa (Italy); Bigazzi, Francesco [INFN, Sezione di Firenze,Via G. Sansone 1, I-50019 Sesto Fiorentino (Firenze) (Italy); Bolognesi, Stefano [Dipartimento di Fisica “E. Fermi' , Università di Pisa and INFN, Sezione di Pisa,Largo B. Pontecorvo 3, I-56127 Pisa (Italy); Cotrone, Aldo L. [INFN, Sezione di Firenze,Via G. Sansone 1, I-50019 Sesto Fiorentino (Firenze) (Italy); Dipartimento di Fisica e Astronomia, Università di Firenze,Via G. Sansone 1, I-50019 Sesto Fiorentino (Firenze) (Italy); Manenti, Andrea [Institute of Physics, EPFL,Rte de la Sorge, BSP 728, CH-1015 Lausanne (Switzerland)

    2017-02-07

    We study the effects of the CP-breaking topological θ-term in the large N{sub c} QCD model by Witten, Sakai and Sugimoto with N{sub f} degenerate light flavors. We first compute the ground state energy density, the topological susceptibility and the masses of the lowest lying mesons, finding agreement with expectations from the QCD chiral effective action. Then, focusing on the N{sub f}=2 case, we consider the baryonic sector and determine, to leading order in the small θ regime, the related holographic instantonic soliton solutions. We find that while the baryon spectrum does not receive O(θ) corrections, this is not the case for observables like the electromagnetic form factor of the nucleons. In particular, it exhibits a dipole term, which turns out to be vector-meson dominated. The resulting neutron electric dipole moment, which is exactly the opposite as that of the proton, is of the same order of magnitude of previous estimates in the literature. Finally, we compute the CP-violating pion-nucleon coupling constant ḡ{sub πNN}, finding that it is zero to leading order in the large N{sub c} limit.

  17. Holographic model for charmonium dissociation

    Science.gov (United States)

    Braga, Nelson R. F.; Ferreira, Luiz F.; Vega, Alfredo

    2017-11-01

    We present a holographic bottom up model for the thermal behavior of c c bar vector mesons in a finite temperature and density plasma. There is a clear physical interpretation for the three input energy parameters of the model. Two of them are related to the mass spectrum of the heavy meson. Namely the quark mass and the string tension of the quark-anti-quark interaction. The third parameter is a large energy scale associated with the non-hadronic meson decay. In such a process the heavy meson is transformed into a much lighter state by electroweak processes. The corresponding transition amplitude is assumed to depend on the energy scale associated with this large mass variation. With this three parameter model one can fit the masses and decay constants of J / Ψ and three radial excitations with an rms error of 20.7%. Using the geometry of a charged black hole, one finds the spectral function for charmonium states inside a plasma at finite temperature and density. The charmonium dissociation in the medium is represented by the decrease in the height of the spectral function peaks.

  18. Holographic correlation functions in Critical Gravity

    Science.gov (United States)

    Anastasiou, Giorgos; Olea, Rodrigo

    2017-11-01

    We compute the holographic stress tensor and the logarithmic energy-momentum tensor of Einstein-Weyl gravity at the critical point. This computation is carried out performing a holographic expansion in a bulk action supplemented by the Gauss-Bonnet term with a fixed coupling. The renormalization scheme defined by the addition of this topological term has the remarkable feature that all Einstein modes are identically cancelled both from the action and its variation. Thus, what remains comes from a nonvanishing Bach tensor, which accounts for non-Einstein modes associated to logarithmic terms which appear in the expansion of the metric. In particular, we compute the holographic 1-point functions for a generic boundary geometric source.

  19. Holographic butterfly effect at quantum critical points

    Science.gov (United States)

    Ling, Yi; Liu, Peng; Wu, Jian-Pin

    2017-10-01

    When the Lyapunov exponent λL in a quantum chaotic system saturates the bound λL ≤ 2π k B T , it is proposed that this system has a holographic dual described by a gravity theory. In particular, the butterfly effect as a prominent phenomenon of chaos can ubiquitously exist in a black hole system characterized by a shockwave solution near the horizon. In this paper we propose that the butterfly velocity can be used to diagnose quantum phase transition (QPT) in holographic theories. We provide evidences for this proposal with an anisotropic holographic model exhibiting metal-insulator transitions (MIT), in which the derivatives of the butterfly velocity with respect to system parameters characterizes quantum critical points (QCP) with local extremes in zero temperature limit. We also point out that this proposal can be tested by experiments in the light of recent progress on the measurement of out-of-time-order correlation function (OTOC).

  20. Holographic dark energy in the DGP model

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, Norman [Universidad de Santiago, Departamento de Fisica, Facultad de Ciencia, Santiago (Chile); Lepe, Samuel [Pontificia Universidad Catolica de Valparaiso, Instituto de Fisica, Facultad de Ciencias, Valparaiso (Chile); Pena, Francisco [Universidad de La Frontera, Departamento de Ciencias Fisicas, Facultad de Ingenieria, Ciencias y Administracion, Avda. Francisco Salazar 01145, Casilla 54-D, Temuco (Chile); Avelino, Arturo [Universidad de Guanajuato, Departamento de Fisica, DCI, Codigo Postal 37150, Leon, Guanajuato (Mexico)

    2012-09-15

    The braneworld model proposed by Dvali, Gabadadze, and Porrati leads to an accelerated universe without cosmological constant or any other form of dark energy. Nevertheless, we have investigated the consequences of this model when an holographic dark energy is included, taking the Hubble scale as IR cutoff. We have found that the holographic dark energy leads to an accelerated flat universe (de Sitter-like expansion) for the two branches: {epsilon}={+-}1, of the DGP model. Nevertheless, in universes with no null curvature the dark energy presents an EoS corresponding to a phantom fluid during the present era and evolving to a de Sitter-like phase for future cosmic time. In the special case in which the holographic parameter c is equal to one we have found a sudden singularity in closed universes. In this case the expansion is decelerating. (orig.)

  1. Holographic bulk viscosity: GPR vs EO

    CERN Document Server

    Buchel, Alex; Kiritsis, Elias

    2011-01-01

    Recently Eling and Oz (EO) proposed a formula for the holographic bulk viscosity, in arXiv:1103.1657, derived from the null horizon focusing equation. This formula seems different from that obtained earlier by Gubser, Pufu and Rocha (GPR) in arXiv:0806.0407 calculated from the IR limit of the two-point function of the trace of the stress tensor. The two were shown to agree only for some simple scaling cases. We point out that the two formulae agree in two non-trivial holographic theories describing RG flows. The first is the strongly coupled N=2* gauge theory plasma. The second is the semi-phenomenological model of Improved Holographic QCD.

  2. Anomalous transport and holographic momentum relaxation

    Science.gov (United States)

    Copetti, Christian; Fernández-Pendás, Jorge; Landsteiner, Karl; Megías, Eugenio

    2017-09-01

    The chiral magnetic and vortical effects denote the generation of dissipationless currents due to magnetic fields or rotation. They can be studied in holographic models with Chern-Simons couplings dual to anomalies in field theory. We study a holographic model with translation symmetry breaking based on linear massless scalar field backgrounds. We compute the electric DC conductivity and find that it can vanish for certain values of the translation symmetry breaking couplings. Then we compute the chiral magnetic and chiral vortical conductivities. They are completely independent of the holographic disorder couplings and take the usual values in terms of chemical potential and temperature. To arrive at this result we suggest a new definition of energy-momentum tensor in presence of the gravitational Chern-Simons coupling.

  3. Holographic duality in condensed matter physics

    CERN Document Server

    Zaanen, Jan; Sun, Ya-Wen; Schalm, Koenraad

    2015-01-01

    A pioneering treatise presenting how the new mathematical techniques of holographic duality unify seemingly unrelated fields of physics. This innovative development morphs quantum field theory, general relativity and the renormalisation group into a single computational framework and this book is the first to bring together a wide range of research in this rapidly developing field. Set within the context of condensed matter physics and using boxes highlighting the specific techniques required, it examines the holographic description of thermal properties of matter, Fermi liquids and superconductors, and hitherto unknown forms of macroscopically entangled quantum matter in terms of general relativity, stars and black holes. Showing that holographic duality can succeed where classic mathematical approaches fail, this text provides a thorough overview of this major breakthrough at the heart of modern physics. The inclusion of extensive introductory material using non-technical language and online Mathematica not...

  4. Collapse and revival in holographic quenches

    Science.gov (United States)

    da Silva, Emilia; Lopez, Esperanza; Mas, Javier; Serantes, Alexandre

    2015-04-01

    We study holographic models related to global quantum quenches in finite size systems. The holographic set up describes naturally a CFT, which we consider on a circle and a sphere. The enhanced symmetry of the conformal group on the circle motivates us to compare the evolution in both cases. Depending on the initial conditions, the dual geometry exhibits oscillations that we holographically interpret as revivals of the initial field theory state. On the sphere, this only happens when the energy density created by the quench is small compared to the system size. However on the circle considerably larger energy densities are compatible with revivals. Two different timescales emerge in this latter case. A collapse time, when the system appears to have dephased, and the revival time, when after rephasing the initial state is partially recovered. The ratio of these two times depends upon the initial conditions in a similar way to what is observed in some experimental setups exhibiting collapse and revivals.

  5. Spectral element boundary integral method with periodic layered medium dyadic Green's function for multiscale nano-optical scattering analysis.

    Science.gov (United States)

    Niu, Jun; Ren, Yi; Liu, Qing Huo

    2017-10-02

    In this work, we propose a numerical solver combining the spectral element - boundary integral (SEBI) method with the periodic layered medium dyadic Green's function. The periodic layered medium dyadic Green's function is formulated under matrix representation. The surface integral equations (SIEs) are then implemented as the radiation boundary condition to truncate the top and bottom computation domain. After describing the interior computation domain with the vector wave equations, and treating the lateral boundaries with Bloch periodic boundary conditions, the whole computation domains are discretized with mixed-order Gauss- Lobatto-Legendre basis functions in the SEBI method. This method avoids the discretization of the top and bottom layered media, so it can be much more efficient than conventional methods. Numerical results validate the proposed solver with fast convergence throughout the whole computation domain and good performance for typical multiscale nano-optical applications.

  6. Investigation of high thermal contact conductance at low contact pressure for high-heat-load optical elements of synchrotron radiation

    Science.gov (United States)

    Takeuchi, T.; Tanaka, M.; Ohashi, H.; Goto, S.

    2013-09-01

    We measured the thermal-contact-conductance (TCC) of indirect cooling components in synchrotron radiation beamlines. To reduce the strain on the optical element, we explored conditions for insertion materials with a high TCC in region with low contact pressures of 0.1-1.0 MPa. We examined the TCC at the interface between oxygen-free copper (OFC) and insertion materials such as indium, graphite, and gold foil. The TCC depended on the hardness and thickness of the insertion material. Thin indium (20 μm thick) showed the highest TCC. Nickel and gold passivation on the OFC surface reduced the TCC to 30% of that for the bare OFC. Future work will involve exploring the passivation conditions of OFC for higher TCC is and measuring the TCC under cryogenic-cooling conditions.

  7. Holographic mutual information for singular surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Mozaffar, M. Reza Mohammadi; Mollabashi, Ali [School of Physics, Institute for Research in Fundamental Sciences (IPM),P.O. Box 19395-5531, Tehran (Iran, Islamic Republic of); Omidi, Farzad [School of Astronomy, Institute for Research in Fundamental Sciences (IPM),P.O. Box 19395-5531, Tehran (Iran, Islamic Republic of)

    2015-12-14

    We study corner contributions to holographic mutual information for entangling regions composed of a set of disjoint sectors of a single infinite circle in 3-dimensional conformal field theories. In spite of the UV divergence of holographic mutual information, it exhibits a first order phase transition. We show that tripartite information is also divergent for disjoint sectors, which is in contrast with the well-known feature of tripartite information being finite even when entangling regions share boundaries. We also verify the locality of corner effects by studying mutual information between regions separated by a sharp annular region. Possible extensions to higher dimensions and hyperscaling violating geometries is also considered for disjoint sectors.

  8. Holographic corrections to meson scattering amplitudes

    Energy Technology Data Exchange (ETDEWEB)

    Armoni, Adi; Ireson, Edwin, E-mail: 746616@swansea.ac.uk

    2017-06-15

    We compute meson scattering amplitudes using the holographic duality between confining gauge theories and string theory, in order to consider holographic corrections to the Veneziano amplitude and associated higher-point functions. The generic nature of such computations is explained, thanks to the well-understood nature of confining string backgrounds, and two different examples of the calculation in given backgrounds are used to illustrate the details. The effect we discover, whilst only qualitative, is re-obtainable in many such examples, in four-point but also higher point amplitudes.

  9. Holographic Photon Production and Anisotropic Flow

    Science.gov (United States)

    Iatrakis, Ioannis; Kiritsis, Elias; Shen, Chun; Yang, Di-Lun

    2017-08-01

    The thermal-photon emission from strongly coupled gauge theories at finite temperature via the bottom-up models in holographic QCD in the deconfined phase is studied. The models are constructed to approximately reproduce the electric conductivity obtained from lattice simulations for the quark gluon plasma (QGP). The emission rates are then embedded in hydrodynamic simulations combined with prompt photons and hadronic contributions to analyze the spectra and anisotropic flow of direct photons in RHIC and LHC. In general, the holographic models enhance the yield and improve the agreement in spectra, while they reduce the flow in low pT and increase it in high pT.

  10. A computer test of holographic flavour dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Filev, Veselin G.; O’Connor, Denjoe [School of Theoretical Physics, Dublin Institute for Advanced Studies,10 Burlington Road, Dublin 4 (Ireland)

    2016-05-20

    We perform computer simulations of the Berkooz-Douglas (BD) matrix model, holographically dual to the D0/D4-brane intersection. We generate the fundamental condensate versus bare mass curve of the theory both holographically and from simulations of the BD model. Our studies show excellent agreement of the two approaches in the deconfined phase of the theory and significant deviations in the confined phase. We argue the discrepancy in the confined phase is explained by the embedding of the D4-brane which yields stronger α{sup ′} corrections to the condensate in this phase.

  11. Holographic Aspects of a Relativistic Nonconformal Theory

    Directory of Open Access Journals (Sweden)

    Chanyong Park

    2013-01-01

    Full Text Available We study a general D-dimensional Schwarzschild-type black brane solution of the Einstein-dilaton theory and derive, by using the holographic renormalization, its thermodynamics consistent with the geometric results. Using the membrane paradigm, we calculate the several hydrodynamic transport coefficients and compare them with the results obtained by the Kubo formula, which shows the self-consistency of the gauge/gravity duality in the relativistic nonconformal theory. In order to understand more about the relativistic non-conformal theory, we further investigate the binding energy, drag force, and holographic entanglement entropy of the relativistic non-conformal theory.

  12. Simultaneous determination of macronutrients, micronutrients and trace elements in mineral fertilizers by inductively coupled plasma optical emission spectrometry

    Science.gov (United States)

    de Oliveira Souza, Sidnei; da Costa, Silvânio Silvério Lopes; Santos, Dayane Melo; dos Santos Pinto, Jéssica; Garcia, Carlos Alexandre Borges; Alves, José do Patrocínio Hora; Araujo, Rennan Geovanny Oliveira

    2014-06-01

    An analytical method for simultaneous determination of macronutrients (Ca, Mg, Na and P), micronutrients (Cu, Fe, Mn and Zn) and trace elements (Al, As, Cd, Pb and V) in mineral fertilizers was optimized. Two-level full factorial design was applied to evaluate the optimal proportions of reagents used in the sample digestion on hot plate. A Doehlert design for two variables was used to evaluate the operating conditions of the inductively coupled plasma optical emission spectrometer in order to accomplish the simultaneous determination of the analyte concentrations. The limits of quantification (LOQs) ranged from 2.0 mg kg- 1 for Mn to 77.3 mg kg- 1 for P. The accuracy and precision of the proposed method were evaluated by analysis of standard reference materials (SRMs) of Western phosphate rock (NIST 694), Florida phosphate rock (NIST 120C) and Trace elements in multi-nutrient fertilizer (NIST 695), considered to be adequate for simultaneous determination. Twenty-one samples of mineral fertilizers collected in Sergipe State, Brazil, were analyzed. For all samples, the As, Ca, Cd and Pb concentrations were below the LOQ values of the analytical method. For As, Cd and Pb the obtained LOQ values were below the maximum limit allowed by the Brazilian Ministry of Agriculture, Livestock and Food Supply (Ministério da Agricultura, Pecuária e Abastecimento - MAPA). The optimized method presented good accuracy and was effectively applied to quantitative simultaneous determination of the analytes in mineral fertilizers by inductively coupled plasma optical emission spectrometry (ICP OES).

  13. Modulation coding for pixel-matched holographic data storage.

    Science.gov (United States)

    Burr, G W; Ashley, J; Coufal, H; Grygier, R K; Hoffnagle, J A; Jefferson, C M; Marcus, B

    1997-05-01

    We describe a digital holographic storage system for the study of noise sources and the evaluation of modulation and error-correction codes. A precision zoom lens and Fourier transform optics provide pixel-to-pixel matching between any input spatial light modulator and output CCD array over magnifications from 0.8 to 3. Holograms are angle multiplexed in LiNbO(3):Fe by use of the 90 degrees geometry, and reconstructions are detected with a 60-frame/s CCD camera. Modulation codes developed on this platform permit image transmission down to signal levels of ~2000 photons per ON camera pixel, at raw bit-error rates (BER's) of better than 10(-5). Using an 8-12-pixel modulation code, we have stored and retrieved 1200 holograms (each with 45,600 user bits) without error, for a raw BER of <2x10(-8).

  14. A remarkably efficient azobenzene peptide for holographic information storage

    DEFF Research Database (Denmark)

    Rasmussen, P.H.; Ramanujam, P.S.; Hvilsted, S.

    1999-01-01

    of effective azobenzene peptides for optical recording. Gratings recorded in 10 can be erased-by circularly polarized light in a few-seconds. It is also noted that, unlike DNOs previously reported, 10 is soluble in common organic solvents and can be assembled by solution phase synthesis, which is mandatory......A new family of proline-based azobenzene peptides (DNO) for holographic information storage is reported.:By use of polarization holography, it was found that gratings with extraordinarily high diffraction efficiency (up to 80%) can be recorded in hundreds of milliseconds in a similar to 13-mu m......-thick film of dimer 10. This represents a decrease of the response time by more than 2 orders of magnitude when compared to that of the ornithine-based DNO dimer previously reported. Furthermore, it supports the expectation that increasing the rigidity of the peptide backbone is: crucial in the design...

  15. White-light spectral interferometric techniques used to measure the group dispersion of isotropic and anisotropic optical elements

    Science.gov (United States)

    Hlubina, P.; Ciprian, D.; Chlebus, R.

    2007-06-01

    We present two di.erent white-light spectral interferometric techniques employing a low-resolution spectrometer for a direct measurement of the group dispersion of isotropic and anisotropic optical elements. First, the dispersion of the group refractive index for glass plate is measured in a Michelson interferometer with the plate of known thickness inserted in one of the interferometer arms. The technique utilizes the spectrometer to record a series of spectral interferograms for measuring the equalization wavelength as a function of the displacement of the interferometer mirror from the reference position, which corresponds to a balanced Michelson interferometer. The use of the technique is extended for measuring the dispersion of the group refractive indices for the ordinary and extraordinary polarizations in a quartz crystal. We con.rm that the measured group dispersions agree well with those resulting from the semiempirical dispersion equations. We also show that the measured mirror displacement depends, in accordance with the theory, linearly on the theoretical group refractive index and that the slope of the corresponding straight line gives precisely the thickness of the quartz crystal. Second, the group dispersion of the quartz crystal is measured in an unbalanced Mach-Zehnder interferometer with the adjustable path length when the crystal is inserted in the test arm. The use of the second technique is extended for measuring the di.erential group dispersion of a glass of a holey optical fiber.

  16. Coding Techniques to Reduce Material Saturation in Holographic Data Storage

    Science.gov (United States)

    Phillips, Seth William

    Holographic data storage (HDS) is an emerging data storage technology that has received attention due to a high theoretical data capacity, fast readout times, and a potentially long lifetime of the recording materials. The work presented in this thesis was undertaken to solve one of the technical impediments preventing the widespread use of HDS, the occurrence of large concentrations of power in recorded holograms. Such peak values of optical power cause the medium to saturate during the recording process. As a result, the most significant portions of the hologram are not recorded accurately, and on readout, saturated recordings are not reconstructed correctly. In the implementation of HDS considered in this thesis, data is organized into an array of pixels using hybrid ternary modulation that contains an OFF-pixel and two different ON-pixels that are differentiated by their phase terms. The Fourier transform of this data array is created optically and the image of the Fourier transform is recorded holographically. This thesis presents a two-step coding technique that decreases the likelihood and severity of peaks in encoded holograms. In the first step, sparsity, the proportion of OFF-pixels in the array, is increased, which decreases the total power in the encoded array. In the second step, phase masks are used to alter the phase of ON-pixels to decrease periodic content in the data array. This reduces the likelihood of an encoded array containing large peak values at any point in the Fourier domain. Analysis is presented for the sparsity encoding which demonstrates the worst-case sparsity for certain system parameters. The performance of both the sparsity encoding and phase masking procedure are tested with numerical simulations. The results of these simulations indicate that these encoding techniques effectively inhibit the occurrence of large intensity peaks the holograms of encoded arrays.

  17. Holographic microscopy for 3D tracking of bacteria

    Science.gov (United States)

    Nadeau, Jay; Cho, Yong Bin; El-Kholy, Marwan; Bedrossian, Manuel; Rider, Stephanie; Lindensmith, Christian; Wallace, J. Kent

    2016-03-01

    Understanding when, how, and if bacteria swim is key to understanding critical ecological and biological processes, from carbon cycling to infection. Imaging motility by traditional light microscopy is limited by focus depth, requiring cells to be constrained in z. Holographic microscopy offers an instantaneous 3D snapshot of a large sample volume, and is therefore ideal in principle for quantifying unconstrained bacterial motility. However, resolving and tracking individual cells is difficult due to the low amplitude and phase contrast of the cells; the index of refraction of typical bacteria differs from that of water only at the second decimal place. In this work we present a combination of optical and sample-handling approaches to facilitating bacterial tracking by holographic phase imaging. The first is the design of the microscope, which is an off-axis design with the optics along a common path, which minimizes alignment issues while providing all of the advantages of off-axis holography. Second, we use anti-reflective coated etalon glass in the design of sample chambers, which reduce internal reflections. Improvement seen with the antireflective coating is seen primarily in phase imaging, and its quantification is presented here. Finally, dyes may be used to increase phase contrast according to the Kramers-Kronig relations. Results using three test strains are presented, illustrating the different types of bacterial motility characterized by an enteric organism (Escherichia coli), an environmental organism (Bacillus subtilis), and a marine organism (Vibrio alginolyticus). Data processing steps to increase the quality of the phase images and facilitate tracking are also discussed.

  18. In vivo X-ray elemental imaging of single cell model organisms manipulated by laser-based optical tweezers

    Science.gov (United States)

    Vergucht, Eva; Brans, Toon; Beunis, Filip; Garrevoet, Jan; de Rijcke, Maarten; Bauters, Stephen; Deruytter, David; Vandegehuchte, Michiel; van Nieuwenhove, Ine; Janssen, Colin; Burghammer, Manfred; Vincze, Laszlo

    2015-03-01

    We report on a radically new elemental imaging approach for the analysis of biological model organisms and single cells in their natural, in vivo state. The methodology combines optical tweezers (OT) technology for non-contact, laser-based sample manipulation with synchrotron radiation confocal X-ray fluorescence (XRF) microimaging for the first time. The main objective of this work is to establish a new method for in vivo elemental imaging in a two-dimensional (2D) projection mode in free-standing biological microorganisms or single cells, present in their aqueous environment. Using the model organism Scrippsiella trochoidea, a first proof of principle experiment at beamline ID13 of the European Synchrotron Radiation Facility (ESRF) demonstrates the feasibility of the OT XRF methodology, which is applied to study mixture toxicity of Cu-Ni and Cu-Zn as a result of elevated exposure. We expect that the new OT XRF methodology will significantly contribute to the new trend of investigating microorganisms at the cellular level with added in vivo capability.

  19. Fabrication of Micro-Optics Elements with Arbitrary Surface Profiles Based on One-Step Maskless Grayscale Lithography

    Directory of Open Access Journals (Sweden)

    Qinyuan Deng

    2017-10-01

    Full Text Available A maskless lithography method to realize the rapid and cost-effective fabrication of micro-optics elements with arbitrary surface profiles is reported. A digital micro-mirror device (DMD is applied to flexibly modulate that the exposure dose according to the surface profile of the structure to be fabricated. Due to the fact that not only the relationship between the grayscale levels of the DMD and the exposure dose on the surface of the photoresist, but also the dependence of the exposure depth on the exposure dose, deviate from a linear relationship arising from the DMD and photoresist, respectively, and cannot be systemically eliminated, complicated fabrication art and large fabrication error will results. A method of compensating the two nonlinear effects is proposed that can be used to accurately design the digital grayscale mask and ensure a precise control of the surface profile of the structure to be fabricated. To testify to the reliability of this approach, several typical array elements with a spherical surface, aspherical surface, and conic surface have been fabricated and tested. The root-mean-square (RMS between the test and design value of the surface height is about 0.1 μm. The proposed method of compensating the nonlinear effect in maskless lithography can be directly used to control the grayscale levels of the DMD for fabricating the structure with an arbitrary surface profile.

  20. Possibilities of High Resolution Inductively Coupled Plasma Optical Emission Spectrometry in the Determination of Trace Elements in Environmental Materials

    Directory of Open Access Journals (Sweden)

    Nikolaya Velitchkova

    2013-01-01

    Full Text Available This paper presents new quantitative data for the spectral interferences obtained by high resolution 40.68 MHz radial viewing inductively coupled plasma optical emission spectrometry (HR-ICP-OES in the determination of Zn, Cd, Sb, Cu, Mn, Pb, Sn, Cr, U, and Ba in environmental materials in the presence of a complex matrix, containing Al, Ca, Fe, Mg, and Ti. The -concept for quantification of spectral interferences was used. The optimum line selection for trace analysis of a variety of multicomponent matrices requires the choice of prominent lines, which are free or negligibly influenced by line interference problems. The versatility of -concept as basic methodology was experimentally demonstrated in the determination of trace of elements in soil and drinking water. The detection limits are lower in comparison with corresponding threshold concentration levels for soil and drinking water in accordance with environmental regulations. This paper shows the possibilities of present day ICP-OES equipment in the direct determination of trace elements (without preconcentration of impurities in environmental samples.