30 CFR 57.19014 - Friction hoist overtravel protection.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Friction hoist overtravel protection. 57.19014 Section 57.19014 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoists § 57.19014 Friction hoist overtravel protection. In a friction hoist installation, tapered...

30 CFR 57.19006 - Automatic hoist braking devices.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic hoist braking devices. 57.19006 Section 57.19006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoists § 57.19006 Automatic hoist braking devices. Automatic hoists shall be provided with devices...

30 CFR 56.19006 - Automatic hoist braking devices.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic hoist braking devices. 56.19006 Section 56.19006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoists § 56.19006 Automatic hoist braking devices. Automatic hoists shall be provided with devices...

30 CFR 56.19057 - Hoist operator's physical fitness.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Hoist operator's physical fitness. 56.19057... Hoisting Hoisting Procedures § 56.19057 Hoist operator's physical fitness. No person shall operate a hoist... who shall certify his fitness to perform this duty. Such certification shall be available at the mine. ...

30 CFR 57.19057 - Hoist operator's physical fitness.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Hoist operator's physical fitness. 57.19057... Hoisting Hoisting Procedures § 57.19057 Hoist operator's physical fitness. No person shall operate a hoist... who shall certify his fitness to perform this duty. Such certification shall be available at the mine. ...

Hoisting and rigging manual: Uncontrolled document

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-05-01

This document is a draft copy of a Hoisting and Rigging Manual for the Department of Energy. The manual is divided into ten chapters. The chapter titles follow: terminology and definitions; operator training and qualification; overhead and gantry cranes; mobile cranes; forklift trucks; hoists; hooks; wire rope, slings, and rigging accessories; construction hoisting and rigging equipment requirements; references.

30 CFR 75.155 - Qualified hoisting engineer; qualifications.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Qualified hoisting engineer; qualifications. 75... Persons § 75.155 Qualified hoisting engineer; qualifications. (a)(1) A person is a qualified hoisting engineer within the provisions of subpart O of this part, for the purpose of operating a steam-driven hoist...

75 FR 75500 - Material Hoists, Personnel Hoists, and Elevators Standard; Extension of the Office of Management...

Science.gov (United States)

2010-12-03

...OSHA solicits public comments concerning its proposal to extend OMB approval of the information collection requirements specified in the Standard on Material Hoists, Personnel Hoists, and Elevators (29 CFR 1926.552).

Probability of failure of the waste hoist brake system at the Waste Isolation Pilot Plant (WIPP)

International Nuclear Information System (INIS)

Greenfield, M.A.; Sargent, T.J.; Stanford Univ., CA

1998-01-01

In its most recent report on the annual probability of failure of the waste hoist brake system at the Waste Isolation Pilot Plant (WIPP), the annual failure rate is calculated to be 1.3E(-7)(1/yr), rounded off from 1.32E(-7). A calculation by the Environmental Evaluation Group (EEG) produces a result that is about 4% higher, namely 1.37E(-7)(1/yr). The difference is due to a minor error in the US Department of Energy (DOE) calculations in the Westinghouse 1996 report. WIPP's hoist safety relies on a braking system consisting of a number of components including two crucial valves. The failure rate of the system needs to be recalculated periodically to accommodate new information on component failure, changes in maintenance and inspection schedules, occasional incidents such as a hoist traveling out-of-control, either up or down, and changes in the design of the brake system. This report examines DOE's last two reports on the redesigned waste hoist system. In its calculations, the DOE has accepted one EEG recommendation and is using more current information about the component failures rates, the Nonelectronic Parts Reliability Data (NPRD). However, the DOE calculations fail to include the data uncertainties which are described in detail in the NPRD reports. The US Nuclear Regulatory Commission recommended that a system evaluation include mean estimates of component failure rates and take into account the potential uncertainties that exist so that an estimate can be made on the confidence level to be ascribed to the quantitative results. EEG has made this suggestion previously and the DOE has indicated why it does not accept the NRC recommendation. Hence, this EEG report illustrates the importance of including data uncertainty using a simple statistical example

Speed and position sensors for mine hoists and elevators

Energy Technology Data Exchange (ETDEWEB)

Kovalchik, P.G.; Duda, F.T. [Bureau of Mines, Pittsburgh, PA (United States). Pittsburgh Research Center

1995-12-31

Mine hoist and elevator safety devices are tested periodically. However, periodic testing cannot ensure that a recently tested safety device will function properly when called upon. Ideally, the condition of critical safety devices should be continuously monitored but this is either impractical or impossible. The US Bureau of Mines is conducting research on the more practical approach of continuously monitoring the speed and position of the shaft conveyance. By monitoring the depth and speed of a conveyance and comparing the result with the appropriate speed curve, an operator can be warned before the curve is exceeded and may then take appropriate action. This information will also detect other hoisting malfunctions such as motor or brake problems. Monitoring the actual cage position during operation and comparing this with the position indicated by the winding drum will indirectly enable the detection of rope slip for friction hoists and slack rope in drum hoists. Hoist systems presently in use are typically not equipped with appropriate devices for directly monitoring actual cage speed and position. Conventional overspeed protection for a mine elevator is currently done by a centrifugal governor. However, a mechanical governor is not capable of determining if the speed curve is changing with respect to the cage position in the hoisting cycle. Therefore, another means of sensing cage speed is needed. This paper discusses several types of speed and position sensors, and advantages and disadvantages of each. The research suggests methods to monitor actual speed and position of the cage, which can be very significant in preventing overspeed accidents resulting from safety device failures in mine hoists and elevators.

PNNL Hoisting and Rigging Manual

Energy Technology Data Exchange (ETDEWEB)

Haynie, Todd O.; Fullmer, Michael W.

2008-12-29

This manual describes the safe and cost effective operation, inspection, maintenance, and repair requirements for cranes, hoists, fork trucks, slings, rigging hardware, and hoisting equipment. It is intended to be a user's guide to requirements, codes, laws, regulations, standards, and practices that apply to Pacific Northwest National Laboratory (PNNL) and its subcontractors.

Modeling, simulation and design optimization of a hoisting rig active heave compensation system

OpenAIRE

Gu, Peter; Walid, Ahmed Ahmed; Iskandarani, Yousef; Karimi, Hamid Reza

2013-01-01

Published version of an article in the journal: International Journal of Machine Learning and Cybernetics. Also available from the publisher at: http://dx.doi.org/10.1007/s13042-012-0076-x The objective of this paper is to present an approach in developing a virtual active heave compensation system for a draw-works on a hoisting rig. A virtual system enables quicker overall product development time of a physical system as well as flexibility in optimizing the design parameters. Development...

Hoisting appliances and fuel handling equipment at nuclear facilities

International Nuclear Information System (INIS)

1987-01-01

The guide is followed by the Finnish Centre for Radiation and Nuclear Safety (STUK) in regulating hoisting and handling equipment Class 3 at nuclear facilities. The guide is applied e.g. to the following equipment: reactor building overhead cranes, hoisting appliances at nuclear fuel storages, fuel handling machines, other hoisting appliances, which because of nuclear safety aspects are classified in Safety Class 3, and load-bearing devices connected with the above equipment, such as replaceable hoisting tools and auxiliary lifting devices. The regulating of hoisting and handling equipment comprises the following stages: handling of preliminary and final safety analysis reports, inspection of the construction plan, supervision of fabrication and construction inspection, and supervision of initial start-up and commissioning inspection

Studies of an application of a mobile communication system to the private telecommunication network. Part 1. Present condition of mobile communication system and proposal of the customer information network by PHS; Idotai tsushin system no denryoku tsushinmo eno tekiyo. 1. Idotai tsushin system no genjo to PHS ni yoru juyo kakei network no teian

Energy Technology Data Exchange (ETDEWEB)

Iwasaki, H. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1996-03-01

An application of various mobile communication systems to the electric power telecommunication network has been investigated. Among these, the customer information network by PHS (personal handy-phone system) has been proposed. Although great numbers of base stations are required for PHS, it can be applied as the customer information network by connecting to the power controller developed by the Central Research Institute of Electric Power Industry. The geostationary satellite telecommunication has been positively utilized by the electric power industry since the Hanshin-Awaji Great Earthquake. It can be used as the customer information network in the future. Since the radio access is a one-way communication, it cannot be applied to the electric power telecommunication network at present. It can be applied to the simple message communication or relatively low-speed data communication through the two-way communication. Public ground mobile telecommunication in the future includes various mobile telecommunication systems. To start the operation in 2000, the ITU (International Telecommunication Union) is making specifications common in the world. It is required to investigate the utilization as multipurpose systems. The network for PHS can be applied to the telecommunication network without optical cable. 20 refs., 5 figs., 3 tabs.

Traction sheave elevator, hoisting unit and machine space

Science.gov (United States)

Hakala, Harri; Mustalahti, Jorma; Aulanko, Esko

2000-01-01

Traction sheave elevator consisting of an elevator car moving along elevator guide rails, a counterweight moving along counterweight guide rails, a set of hoisting ropes (3) on which the elevator car and counterweight are suspended, and a drive machine unit (6) driving a traction sheave (7) acting on the hoisting ropes (3) and placed in the elevator shaft. The drive machine unit (6) is of a flat construction. A wall of the elevator shaft is provided with a machine space with its open side facing towards the shaft, the essential parts of the drive machine unit (6) being placed in the space. The hoisting unit (9) of the traction sheave elevator consists of a substantially discoidal drive machine unit (6) and an instrument panel (8) mounted on the frame (20) of the hoisting unit.

Research on Attribute Reduction in Hoisting Motor State Recognition of Quayside Container Crane

Science.gov (United States)

Li, F.; Tang, G.; Hu, X.

2017-07-01

In view of too many attributes in hoisting motor state recognition of quayside container crane. Attribute reduction method based on discernibility matrix is introduced to attribute reduction of lifting motor state information table. A method of attribute reduction based on the combination of rough set and genetic algorithm is proposed to deal with the hoisting motor state decision table. Under the condition that the information system's decision-making ability is unchanged, the redundant attribute is deleted. Which reduces the complexity and computation of the recognition process of the hoisting motor. It is possible to realize the fast state recognition.

Hoisting appliances and fuel handling equipment at nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-31

The guide is followed by the Finnish Centre for Radiation and Nuclear Safety (STUK) in regulating hoisting and handling equipment Class 3 at nuclear facilities. The guide is applied e.g. to the following equipment: reactor building overhead cranes, hoisting appliances at nuclear fuel storages, fuel handling machines, other hoisting appliances, which because of nuclear safety aspects are classified in Safety Class 3, and load-bearing devices connected with the above equipment, such as replaceable hoisting tools and auxiliary lifting devices. The regulating of hoisting and handling equipment comprises the following stages: handling of preliminary and final safety analysis reports, inspection of the construction plan, supervision of fabrication and construction inspection, and supervision of initial start-up and commissioning inspection. 36 refs. Translation. The original text is published under the same guide number. The guide is valid from 5 January 1987 and will be in force until further notice.

30 CFR 75.1403-2 - Criteria-Hoists transporting materials; brakes.

Science.gov (United States)

2010-07-01

... Mantrips § 75.1403-2 Criteria—Hoists transporting materials; brakes. Hoists and elevators used to transport materials should be equipped with brakes capable of stopping and holding the fully loaded platform, cage... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Criteria-Hoists transporting materials; brakes...

Designing vertical mine shafts under conditions of increasing shaft depth with rock hoisting to the operating mining level

Energy Technology Data Exchange (ETDEWEB)

Durov, E.M.

1983-05-01

A system for shaft excavation in deep coal mines with mining depth exceeding 1,000 m is discussed. During mine sinking rocks are removed to the ground surface. When depth of a deep mine shaft is increased rocks are removed to the operating mining level, causing lower investment costs than the system with rock hoisting to the ground surface. The Yuzhgiproshakht design firm carries out investigations on the optimum methods for increasing shaft depth in coal mines. Coal mines with the following coal output are included in evaluations: 0.9, 1.2, 1.5, and 1.8 Mt/year. Mine shaft depth of 600, 800, 1000, 1200, 1400 and 1600 m is analyzed. Shaft depth is increased by 100, 200, 300 or 400 m. Shaft sinking rate ranges from 10 to 70 m/month. Effects of rock hoisting from the shaft bottom on the hoisting scheme in a mine shaft are analyzed. Position of hoisting bucket in relation to cages or skips moving in a shaft is investigated. Investigation results are given in 5 schemes. Analyses show that use of a shaft sinking system with rock hoisting to the ground surface during shaft excavation and with rock hoisting to the operating mining level during shaft depth increasing is economical when a shaft with skips is from 7 to 8 m in diameter or when a cage shaft is 6 m, 7 m or 8 m in diameter. Use of standardized shaft excavation systems is recommended. (In Russian)

30 CFR 77.1400 - Personnel hoists and elevators.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Personnel hoists and elevators. 77.1400 Section 77.1400 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Personnel Hoisting § 77.1400 Personnel...

Fault Diagnosis Method for a Mine Hoist in the Internet of Things Environment.

Science.gov (United States)

Li, Juanli; Xie, Jiacheng; Yang, Zhaojian; Li, Junjie

2018-06-13

To reduce the difficulty of acquiring and transmitting data in mining hoist fault diagnosis systems and to mitigate the low efficiency and unreasonable reasoning process problems, a fault diagnosis method for mine hoisting equipment based on the Internet of Things (IoT) is proposed in this study. The IoT requires three basic architectural layers: a perception layer, network layer, and application layer. In the perception layer, we designed a collaborative acquisition system based on the ZigBee short distance wireless communication technology for key components of the mine hoisting equipment. Real-time data acquisition was achieved, and a network layer was created by using long-distance wireless General Packet Radio Service (GPRS) transmission. The transmission and reception platforms for remote data transmission were able to transmit data in real time. A fault diagnosis reasoning method is proposed based on the improved Dezert-Smarandache Theory (DSmT) evidence theory, and fault diagnosis reasoning is performed. Based on interactive technology, a humanized and visualized fault diagnosis platform is created in the application layer. The method is then verified. A fault diagnosis test of the mine hoisting mechanism shows that the proposed diagnosis method obtains complete diagnostic data, and the diagnosis results have high accuracy and reliability.

The "PHS Increased Risk" Label Is Associated With Nonutilization of Hundreds of Organs per Year.

Science.gov (United States)

Volk, Michael L; Wilk, Amber R; Wolfe, Cameron; Kaul, Daniel R

2017-07-01

The Public Health Service "Increased Risk" (PHS IR) designation identifies donors at increased risk of transmitting hepatitis B, C, and human immunodeficiency virus. Although the risk remains very low in the era of nucleic acid testing, we hypothesized that this label may result in decreased organ utilization. Organ Procurement and Transplantation Network data were used to compare utilization rates between PHS-IR and non-PHS-IR donors, as well as to compare export rates and variation in utilization. Among adult standard criteria donors between 2010 and 2013 with a known PHS-IR status, covariate-adjusted utilization rates were lower among PHS-IR donors than non-PHS-IR donors for all organs. For example, 4073 (76.7%) of 5314 PHS-IR kidneys were used, compared with 25 490 (83.7%) of 30 456 non-PHS-IR kidneys-an absolute difference of 7%. Furthermore, all PHS-IR organs had higher export rates than non-PHS-IR organs. For example, 28.7% of PHS-IR kidneys were exported versus 19.7% of non-PHS-IR kidneys. Finally, the utilization rate of PHS-IR organs varied by Donation Service Area; utilization ranged from 20% to 100% among adult kidneys, suggesting significant variation in practices. Similar patterns were seen among pediatric donors. Based on the covariate-adjusted model, if the PHS-IR label did not exist, there could be an additional 313 transplants performed in the United States each year. The PHS "increased risk" label appears to be associated with nonutilization of hundreds of organs per year, despite the very low risk of disease transmission. Better tools are needed to communicate the magnitude of risk to patients and their families.

Classical Measurement Methods and Laser Scanning Usage in Shaft Hoist Assembly Inventory

Science.gov (United States)

Jaśkowski, Wojciech; Lipecki, Tomasz; Matwij, Wojciech; Jabłoński, Mateusz

2018-03-01

The shaft hoist assembly is the base of underground mining plant. Its efficiency and correct operation is subject to restrictive legal regulations and is controlled on a daily visual assessment by shaft crew and energomechanics. In addition, in the regular interval, the shaft hoist assembly is subject to a thorough inventory, which includes the determination of the geometrical relationships between the hoisting machine, the headframe and the shaft with its housing. Inventory measurements for shaft and headframe are used for years of conventional geodetic methods including mechanical or laser plumbing and tachymetric surveys. Additional precision levelling is also used for measuring shafts of hoisting machines and rope pulleys. Continuous modernization of measuring technology makes it possible to implement the further methods to the above mentioned purposes. The comparison of the accuracy and the economics of performing measurements based on many years of experience with comprehensive inventory of shaft hoist assembly using various research techniques was made and detailed in the article.

Classical Measurement Methods and Laser Scanning Usage in Shaft Hoist Assembly Inventory

Directory of Open Access Journals (Sweden)

Jaśkowski Wojciech

2018-01-01

Full Text Available The shaft hoist assembly is the base of underground mining plant. Its efficiency and correct operation is subject to restrictive legal regulations and is controlled on a daily visual assessment by shaft crew and energomechanics. In addition, in the regular interval, the shaft hoist assembly is subject to a thorough inventory, which includes the determination of the geometrical relationships between the hoisting machine, the headframe and the shaft with its housing. Inventory measurements for shaft and headframe are used for years of conventional geodetic methods including mechanical or laser plumbing and tachymetric surveys. Additional precision levelling is also used for measuring shafts of hoisting machines and rope pulleys. Continuous modernization of measuring technology makes it possible to implement the further methods to the above mentioned purposes. The comparison of the accuracy and the economics of performing measurements based on many years of experience with comprehensive inventory of shaft hoist assembly using various research techniques was made and detailed in the article.

State Identification of Hoisting Motors Based on Association Rules for Quayside Container Crane

Science.gov (United States)

Li, Q. Z.; Gang, T.; Pan, H. Y.; Xiong, H.

2017-07-01

Quay container crane hoisting motor is a complex system, and the characteristics of long-term evolution and change of running status of there is a rule, and use it. Through association rules analysis, this paper introduced the similarity in association rules, and quay container crane hoisting motor status identification. Finally validated by an example, some rules change amplitude is small, regular monitoring, not easy to find, but it is precisely because of these small changes led to mechanical failure. Therefore, using the association rules change in monitoring the motor status has the very strong practical significance.

Deceased Organ Donors and PHS Risk Identification: Impact on Organ Usage and Outcomes.

Science.gov (United States)

Pruett, Timothy L; Clark, Marissa A; Taranto, Sarah E

2017-07-01

In 2013, the public health service (PHS) changed the criteria intended to identify organ donors that put the associated organ recipients at increased risk for acquiring human immunodeficiency virus (HIV), hepatitis B virus (HBV), and hepatitis C virus (HCV). The changing donor demographics, organ utilization, and outcomes associated with this change are not known. A review of the Organ Procurement and Transplantation Network database was performed to assess the impact of PHS donor designation on organ utilization and outcomes. After the 2013 modification, over 20% of all deceased organ donors in the United States were identified as PHS increased risk. Compared with the standard risk deceased organ donor, the PHS donor was younger, male, died from anoxia, more likely to be HCV and antibody reacting to hepatitis B core antigen+, and less likely to have diabetes or hypertension. Organs from the 18- to 34-year-old deceased donors with PHS risks (but relatively few medical comorbidities) and tested negative for HCV were less frequently transplanted compared with the standard risk donors (3.9 vs 4.2 organs transplanted per donor). However, the transplant patient and graft survival as well as risk of unexpected transmission of HIV, HBV, and HCV were equivalent, irrespective of PHS donor status. The rationale of using PHS donor designation that negatively impacts utilization of high-quality organs without the benefit of identifying the subset of organs with demonstrable proclivity to transmit HIV, HBV, or HCV needs to be reexamined.

An analysis of the annual probability of failure of the waste hoist brake system at the Waste Isolation Pilot Plant (WIPP)

Energy Technology Data Exchange (ETDEWEB)

Greenfield, M.A. [Univ. of California, Los Angeles, CA (United States); Sargent, T.J.

1995-11-01

The Environmental Evaluation Group (EEG) previously analyzed the probability of a catastrophic accident in the waste hoist of the Waste Isolation Pilot Plant (WIPP) and published the results in Greenfield (1990; EEG-44) and Greenfield and Sargent (1993; EEG-53). The most significant safety element in the waste hoist is the hydraulic brake system, whose possible failure was identified in these studies as the most important contributor in accident scenarios. Westinghouse Electric Corporation, Waste Isolation Division has calculated the probability of an accident involving the brake system based on studies utilizing extensive fault tree analyses. This analysis conducted for the U.S. Department of Energy (DOE) used point estimates to describe the probability of failure and includes failure rates for the various components comprising the brake system. An additional controlling factor in the DOE calculations is the mode of operation of the brake system. This factor enters for the following reason. The basic failure rate per annum of any individual element is called the Event Probability (EP), and is expressed as the probability of failure per annum. The EP in turn is the product of two factors. One is the {open_quotes}reported{close_quotes} failure rate, usually expressed as the probability of failure per hour and the other is the expected number of hours that the element is in use, called the {open_quotes}mission time{close_quotes}. In many instances the {open_quotes}mission time{close_quotes} will be the number of operating hours of the brake system per annum. However since the operation of the waste hoist system includes regular {open_quotes}reoperational check{close_quotes} tests, the {open_quotes}mission time{close_quotes} for standby components is reduced in accordance with the specifics of the operational time table.

An analysis of the annual probability of failure of the waste hoist brake system at the Waste Isolation Pilot Plant (WIPP)

International Nuclear Information System (INIS)

Greenfield, M.A.; Sargent, T.J.

1995-11-01

The Environmental Evaluation Group (EEG) previously analyzed the probability of a catastrophic accident in the waste hoist of the Waste Isolation Pilot Plant (WIPP) and published the results in Greenfield (1990; EEG-44) and Greenfield and Sargent (1993; EEG-53). The most significant safety element in the waste hoist is the hydraulic brake system, whose possible failure was identified in these studies as the most important contributor in accident scenarios. Westinghouse Electric Corporation, Waste Isolation Division has calculated the probability of an accident involving the brake system based on studies utilizing extensive fault tree analyses. This analysis conducted for the U.S. Department of Energy (DOE) used point estimates to describe the probability of failure and includes failure rates for the various components comprising the brake system. An additional controlling factor in the DOE calculations is the mode of operation of the brake system. This factor enters for the following reason. The basic failure rate per annum of any individual element is called the Event Probability (EP), and is expressed as the probability of failure per annum. The EP in turn is the product of two factors. One is the open-quotes reportedclose quotes failure rate, usually expressed as the probability of failure per hour and the other is the expected number of hours that the element is in use, called the open-quotes mission timeclose quotes. In many instances the open-quotes mission timeclose quotes will be the number of operating hours of the brake system per annum. However since the operation of the waste hoist system includes regular open-quotes reoperational checkclose quotes tests, the open-quotes mission timeclose quotes for standby components is reduced in accordance with the specifics of the operational time table

76 FR 31337 - Public Health Service Act (PHS); Delegation of Authority

Science.gov (United States)

2011-05-31

... Service Act (PHS); Delegation of Authority Notice is hereby given that pursuant to Section 3306(14) of the... authorities described in section 3306(14)(B) of the PHS Act. This delegation is in addition to those duties..., pursuant to the delegation in the previous paragraph. These authorities shall be exercised under the...

42 CFR 93.221 - PHS support.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false PHS support. 93.221 Section 93.221 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH ASSESSMENTS AND HEALTH EFFECTS STUDIES OF HAZARDOUS SUBSTANCES RELEASES AND FACILITIES PUBLIC HEALTH SERVICE POLICIES ON RESEARCH...

Hoist motor replacements. Help slash downtime, unplanned outages

Energy Technology Data Exchange (ETDEWEB)

Elliott, J.

2004-11-01

The article describes the design and retrofitting of a 'Dynamic Field Control' system to a P & H 4100 shovel. Designed by Drives and Controls Services Inc., this is a control system operated with a programmable logic control that enhances the performance of the hoist motor on the shovel. Flanders Electric Motor Service fitted prototype M22 motors with these control to P & H 4100 shovels in February 2001. Since then they have been retrofitted successfully to other shovels, in operation in India and Australia. 4 figs.

Engineering task plan for the development, fabrication and installation of rotary mode core sample truck grapple hoist box level wind system

International Nuclear Information System (INIS)

BOGER, R.M.

1999-01-01

This Engineering Task Plan is to design, generate fabrication drawings, fabricate, test, and install the grapple hoist level wind system for Rotary Mode Core Sample Trucks (RMCST) 3 and 4. Deliverables will include generating fabrication drawings, fabrication of one level wind system, updating fabrication drawings as required, and installation of level wind systems on RMCST 3 or 4. The installation of the level wind systems will be done during a preventive maintenance outage

A probabilistic analysis of a catastrophic transuranic waste hoist accident at the WIPP

International Nuclear Information System (INIS)

Greenfield, M.A.; Sargent, T.J.; Stanford Univ., CA

1993-06-01

This report builds upon the extensive and careful analyses made by the DOE of the probability of failure of the waste hoist, and more particularly on the probability of failure of a major component, the hydraulic brake system. The extensive fault tree analysis prepared by the DOE was the starting point of the present report. A key element of this work is the use of probability distributions rather than so-called point estimates to describe the probability of failure of an element. One of the authors (MAG) developed the expressions for the probability of failure of the brake system. The second author (TJS) executed the calculations of the final expressions for failure probabilities. The authors hope that this work will be of use to the DOE in its evaluation of the safety of the waste hoist, a key element at the WIPP

Dynamics of dump truck entrance onto the hoist platform of a mine inclined elevator

Energy Technology Data Exchange (ETDEWEB)

Nosyrev, B.A.; Popov, Yu.V.; Mukhutdinov, Sh.D. (Sverdlovskii Gornyi Institut (USSR))

1989-01-01

Analyzes the feasibility of transporting heavy-duty dump trucks along slopes on special platforms in coal surface mines. The platforms are hoisted by winches. Theoretical problems associated with hoisting a loaded platform upwards are analyzed. Problems associated with truck travel in the platform area, its exact positioning and mechanical vibrations of the platform caused by truck movement are discussed. Vibrations of the platform with a loaded truck and vibration amplitudes are analyzed. Five states of the system are evaluated. Methods for prevention of excessive vibrations by optimization of platform design and use of flexible elements are evaluated. Optimum speed of truck movement for platform entering is recommended.

Improved Visual Hook Capturing and Tracking for Precision Hoisting of Tower Crane

Directory of Open Access Journals (Sweden)

Yanming Li

2013-01-01

Full Text Available To maintain safe operation of the tower crane, it is important to monitor the activities of the hook system. Visual monitoring and image recognition are the optimum methods for crane hook tracking and precision hoisting. High real-time performance and low computation requirements are required for tower crane hook capturing and tracking system which is implemented on the embedded Advanced RISC Machines (ARM processor or Microcontrol Unit (MCU. Using the lift rope of a tower crane as the target object, a new high-performance hook tracking method suitble for ARM processor or MCU applications is presented. The features of the lifting process are analyzed, and an improved progressive probabilistic Hough transform (IPPHT algorithm is proposed which canreduce capturing time by up to 80%. Combining color histogram with a binary search algorithm, an adaptive zooming method for precise hoisting is presented. Using this method the optimum zoom scale can be achieved within a few iterations.

PHS terminal 'TEGACKY' dedicated to e-mailing; Mail senyo PHS tanmatsu 'TEGACKY

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The e-mail utilization rate at mobile communication terminals is increasing at a remarkable rate, as if to grow above the rate of communication by voice. Under the circumstances, a PHS (Personal Handyphone System) terminal 'TEGACKY' (type name: PM-T101) has been developed, designed exclusively for use for e-mailing. 'TEGACKY' is characterized in that its icons may be activated with pen, that input may be made by handwriting, and that its large screen allows a 48-character message consisting of 4 lines of 12 characters to be displayed at one time despite its compact size. It can also perform communication directly with other terminals or e-mail via center, and is provided with an information service function. 'TEGACKY' having such distinguished features has created a new category of terminals which are at once e-mailing tools. (translated by NEDO)

76 FR 3175 - Proposed Extension of Existing Information Collection; Hoist Operators' Physical Fitness

Science.gov (United States)

2011-01-19

... Extension of Existing Information Collection; Hoist Operators' Physical Fitness AGENCY: Mine Safety and... fitness. DATES: All comments must be received by midnight Eastern Standard Time on March 21, 2011... 56.19057 and 57.19057 require the annual examination and certification of hoist operators' fitness by...

30 CFR 57.19107 - Precautions for work in compartment affected by hoisting operation.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Precautions for work in compartment affected by hoisting operation. 57.19107 Section 57.19107 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... AND NONMETAL MINES Personnel Hoisting Shafts § 57.19107 Precautions for work in compartment affected...

30 CFR 56.19107 - Precautions for work in compartment affected by hoisting operation.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Precautions for work in compartment affected by hoisting operation. 56.19107 Section 56.19107 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... NONMETAL MINES Personnel Hoisting Shafts § 56.19107 Precautions for work in compartment affected by...

30 CFR 75.1400 - Hoisting equipment; general.

Science.gov (United States)

2010-07-01

... transport persons shall be equipped with brakes capable of stopping the fully loaded platform, cage, or... every two months. (d) Hoisting equipment, including automatic elevators, used to transport persons shall... required for automatically operated cages, platforms, or elevators. [48 FR 53239, Nov. 25, 1983] ...

Changing the paradigm of organ utilization from PHS increased-risk donors: an opportunity whose time has come?

Science.gov (United States)

Sibulesky, Lena; Javed, Imran; Reyes, Jorge D; Limaye, Ajit P

2015-09-01

Approximately 8-11% of all organ donors are classified by Public Health Service (PHS) as increased-risk. The proportion of PHS increased-risk donors is on the rise. At the University of Washington Medical Center, in 2014, the proportion of transplants from PHS increased-risk donors was 28% of liver transplants and 23% of kidney transplants. Nationally, transplant providers have been reluctant to use organs from PHS increased-risk donors because of concern for transmission of HIV, HCV, or HBV. There is also patient apprehension when these organs are being offered, and thus the discard rate of these otherwise good quality organs is high. Because of the organ shortage, preventing underutilization of such organs is essential. We provide data and considerations that should be used to guide the use of organs from PHS increased-risk donors. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Detection of Acute Myocardial Infarction in a Pig Model Using the SAN-Atrial-AVN-His (SAAH) Electrocardiogram (ECG), Model PHS-A10, an Automated and Integrated Signals Recognition System.

Science.gov (United States)

Zhao, Wenjiao; Lu, Guihua; Liu, Li; Sun, Zhishan; Wu, Mingxin; Yi, Wenyan; Chen, Haiyan; Li, Yanhui; Tang, Lilong; Zeng, Jianping

2018-03-04

BACKGROUND The aim of this study was to compare the use of the standard 12-lead electrocardiogram (ECG) with the SAN-Atrial-AVN-His (SAAH) ECG (Model PHS-A10), a new automated and integrated signals recognition system that detects micro-waveforms within the P, QRS, and T-wave, in a pig model of acute myocardial infarction (MI). MATERIAL AND METHODS Six medium-sized domestic Chinese pigs underwent general anesthesia, and an angioplasty balloon was placed and dilated for 120 minutes in the first diagonal coronary artery arising from the left anterior descending (LAD) coronary artery. A standard ECG and a SAAH ECG (Model PHS-A10) were used to evaluate: 1) the number of wavelets in ST-T segment in lead V5; 2) the duration of the repolarization initial (Ri), or duration of the wavelets starting from the J-point to the endpoint of the wavelets in the ST interval; 3) the duration of the repolarization terminal (Rt), of the wavelets, starting from the endpoint of the wavelets in the ST interval to the cross-point of the T-wave and baseline; 4) the ratio Ri: Rt. RESULTS Following coronary artery occlusion, duration of Ri and Ri/Rt increased, and Rt decreased, which was detected by the SAAH ECG (Model PHS-A10) within 12 seconds, compared with standard ECG that detected ST segment depression at 24 seconds following coronary artery occlusion. CONCLUSIONS The findings from this preliminary study in a pig model of acute MI support the need for clinical studies to evaluate the SAAH ECG (Model PHS-A10) for the early detection of acute MI.

75 FR 40842 - Public Health Service Act (PHS), Delegation of Authority

Science.gov (United States)

2010-07-14

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Public Health Service Act (PHS), Delegation of Authority Notice is hereby given that I have delegated to the Director... Secretary of Health and Human Services under the following section under Title XXVI of the Public Health...

Privacy Act of 1974; system of records--PHS. Waiver of advance notice period for a new system of records.

Science.gov (United States)

1983-08-30

FR Doc. 83-18581, appearing at page 31738 in the issue of Monday, July 11, 1983, provided notification of a new system of records proposed by the Health Resources and Services Administration (HRSA). That system is 09-15-0045, "Health Resources and Services Administration Loan Repayment/Debt Management Records System, HHS/HRSA/OA." The document stated that the Public Health Service had requested that the Office of Management and Budget (OMB) grant a waiver of the usual requirement that a system of records not be put into effect until 60 days after the report is sent to OMB and the Congress OMB granted the requested waiver on August 3, 1983. Accordingly, the new system of records, 09-15-0045, became effective upon the date of the waiver except for the routine uses established for the system. They became effective August 11, 1983, following the public comment period. However, in response to a comment received from the responsible oversight committee of the U.S. House of Representatives, we are adding a routine use to permit disclosure of information from these records to the General Accounting Office (GAO) and OMB for auditing financial obligations. We are also modifying one of the existing routine uses. PHS invites interested parties to submit comments on the proposed new routine use on or before September 29, 1983. In accordance with the Debt Collection Act of 1982 (Pub. L. 97-365), we are also adding the "special disclosure" statement. This statement does not require a public comment period.

State Recognition and Visualization of Hoisting Motor of Quayside Container Crane Based on SOFM

Science.gov (United States)

Yang, Z. Q.; He, P.; Tang, G.; Hu, X.

2017-07-01

The neural network structure and algorithm of self-organizing feature map (SOFM) are researched and analysed. The method is applied to state recognition and visualization of the quayside container crane hoisting motor. By using SOFM, the clustering and visualization of attribute reduction of data are carried out, and three kinds motor states are obtained with Root Mean Square(RMS), Impulse Index and Margin Index, and the simulation visualization interface is realized by MATLAB. Through the processing of the sample data, it can realize the accurate identification of the motor state, thus provide better monitoring of the quayside container crane hoisting motor and a new way for the mechanical state recognition.

Doserate mapping studies of the Multipurpose Gamma Irradiation Facility after hoist cable replacement

International Nuclear Information System (INIS)

Banini, G.K.; Emi-Reynolds, G.

1998-01-01

Irradiation of ethanol chlorobenzene dosimeters (ECB) in air have been carried out in an attempt to map out and confirm the gamma dose field for the inner and outer chambers of the Gamma Irradiation Facility at the Radiation Technology Centre after the replacement of the 5mm diameter stainless weak hoist cables by a 6mm one. The results obtained were compared with expected dose rate values (regressed from the suppliers readings) for the various positions within the irradiation chamber. Our study reveal that the replacement of the hoist cables have been done correctly within specifications and that the dose rate map has not been affected. The significance of the work to routine radiation processing are discussed. (author). 6 refs.; 8 figs

Haplotype Analysis of the Pre-harvest Sprouting Resistance Locus Phs-A1 Reveals a Causal Role of TaMKK3-A in Global Germplasm.

Science.gov (United States)

Shorinola, Oluwaseyi; Balcárková, Barbara; Hyles, Jessica; Tibbits, Josquin F G; Hayden, Matthew J; Holušova, Katarina; Valárik, Miroslav; Distelfeld, Assaf; Torada, Atsushi; Barrero, Jose M; Uauy, Cristobal

2017-01-01

Pre-harvest sprouting (PHS) is an important cause of quality loss in many cereal crops and is particularly prevalent and damaging in wheat. Resistance to PHS is therefore a valuable target trait in many breeding programs. The Phs-A1 locus on wheat chromosome arm 4AL has been consistently shown to account for a significant proportion of natural variation to PHS in diverse mapping populations. However, the deployment of sprouting resistance is confounded by the fact that different candidate genes, including the tandem duplicated Plasma Membrane 19 ( PM19 ) genes and the mitogen-activated protein kinase kinase 3 ( TaMKK3-A) gene, have been proposed to underlie Phs-A1 . To further define the Phs-A1 locus, we constructed a physical map across this interval in hexaploid and tetraploid wheat. We established close proximity of the proposed candidate genes which are located within a 1.2 Mb interval. Genetic characterization of diverse germplasm used in previous genetic mapping studies suggests that TaMKK3-A , and not PM19 , is the major gene underlying the Phs-A1 effect in European, North American, Australian and Asian germplasm. We identified the non-dormant TaMKK3-A allele at low frequencies within the A-genome diploid progenitor Triticum urartu genepool, and show an increase in the allele frequency in modern varieties. In United Kingdom varieties, the frequency of the dormant TaMKK3-A allele was significantly higher in bread-making quality varieties compared to feed and biscuit-making cultivars. Analysis of exome capture data from 58 diverse hexaploid wheat accessions identified fourteen haplotypes across the extended Phs-A1 locus and four haplotypes for TaMKK3-A . Analysis of these haplotypes in a collection of United Kingdom and Australian cultivars revealed distinct major dormant and non-dormant Phs-A1 haplotypes in each country, which were either rare or absent in the opposing germplasm set. The diagnostic markers and haplotype information reported in the study will

Haplotype Analysis of the Pre-harvest Sprouting Resistance Locus Phs-A1 Reveals a Causal Role of TaMKK3-A in Global Germplasm

Directory of Open Access Journals (Sweden)

Oluwaseyi Shorinola

2017-09-01

Full Text Available Pre-harvest sprouting (PHS is an important cause of quality loss in many cereal crops and is particularly prevalent and damaging in wheat. Resistance to PHS is therefore a valuable target trait in many breeding programs. The Phs-A1 locus on wheat chromosome arm 4AL has been consistently shown to account for a significant proportion of natural variation to PHS in diverse mapping populations. However, the deployment of sprouting resistance is confounded by the fact that different candidate genes, including the tandem duplicated Plasma Membrane 19 (PM19 genes and the mitogen-activated protein kinase kinase 3 (TaMKK3-A gene, have been proposed to underlie Phs-A1. To further define the Phs-A1 locus, we constructed a physical map across this interval in hexaploid and tetraploid wheat. We established close proximity of the proposed candidate genes which are located within a 1.2 Mb interval. Genetic characterization of diverse germplasm used in previous genetic mapping studies suggests that TaMKK3-A, and not PM19, is the major gene underlying the Phs-A1 effect in European, North American, Australian and Asian germplasm. We identified the non-dormant TaMKK3-A allele at low frequencies within the A-genome diploid progenitor Triticum urartu genepool, and show an increase in the allele frequency in modern varieties. In United Kingdom varieties, the frequency of the dormant TaMKK3-A allele was significantly higher in bread-making quality varieties compared to feed and biscuit-making cultivars. Analysis of exome capture data from 58 diverse hexaploid wheat accessions identified fourteen haplotypes across the extended Phs-A1 locus and four haplotypes for TaMKK3-A. Analysis of these haplotypes in a collection of United Kingdom and Australian cultivars revealed distinct major dormant and non-dormant Phs-A1 haplotypes in each country, which were either rare or absent in the opposing germplasm set. The diagnostic markers and haplotype information reported in the

76 FR 28812 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Hoist...

Science.gov (United States)

2011-05-18

... addition, notwithstanding any other provisions of law, no person shall generally be subject to penalty for... of a hoisting conveyance can result in serious physical harm or death to all passengers. This...

Method for lowering explosives into a well and hoisting the equipment therefrom

Energy Technology Data Exchange (ETDEWEB)

Grigoryan, N G; Gushchin, N I; Fridlyander, L Ya; Vitseni, E M

1962-06-05

In order to lower the cost and simplifying the shooting and explosives procedure, the explosives and other equipment are lowered into a well on a wire line by means of their own weight. The hoisting of the shooting equipment is accomplished by means of a reactive engine attached to the device.

First hoisting of the Portuguese flag at CERN

CERN Multimedia

Unknown, Unknown

1986-01-01

First hoisting of the Portuguese flag at CERN, following the country's membership. Photo taken on January 22 (or 23), 1986. From left to right: António Costa Lobo (Portugal's ambassador to the UN in Geneva), Gaspar Barreira, Karin Wall (José Mariano Gago's wife), José Mariano Gago (Portugal's JNICT president), Catarina Wall Gago (José Mariano Gago's daughter), João Varela, Herwig Schopper (CERN's Director-General), Eduardo Arantes e Oliveira (Portugal's Secretary of State for Science), , Margarida Nesbitt Rebelo, , Mário Pimenta, , Gustavo Castelo Branco, João Seixas, Sérgio Ramos, and Peter Sonderegger.

Orion Crew Module / Service Module Structural Weight and Center of Gravity Simulator and Vehicle Motion Simulator Hoist Structure for Orion Service Module Umbilical Testing

Science.gov (United States)

Ascoli, Peter A.; Haddock, Michael H.

2014-01-01

An Orion Crew Module Service Module Structural Weight and Center of Gravity Simulator and a Vehicle Motion Simulator Hoist Structure for Orion Service Module Umbilical Testing were designed during a summer 2014 internship in Kennedy Space Centers Structures and Mechanisms Design Branch. The simulator is a structure that supports ballast, which will be integrated into an existing Orion mock-up to simulate the mass properties of the Exploration Mission-1 flight vehicle in both fueled and unfueled states. The simulator mimics these configurations through the use of approximately 40,000 lbf of steel and water ballast, and a steel support structure. Draining four water tanks, which house the water ballast, transitions the simulator from the fueled to unfueled mass properties. The Ground Systems Development and Operations organization will utilize the simulator to verify and validate equipment used to maneuver and transport the Orion spacecraft in its fueled and unfueled configurations. The second design comprises a cantilevered tripod hoist structure that provides the capability to position a large Orion Service Module Umbilical in proximity to the Vehicle Motion Simulator. The Ground Systems Development and Operations organization will utilize the Vehicle Motion Simulator, with the hoist structure attached, to test the Orion Service Module Umbilical for proper operation prior to installation on the Mobile Launcher. Overall, these two designs provide NASA engineers viable concepts worthy of fabricating and placing into service to prepare for the launch of Orion in 2017.

Operation and maintenance techniques of cranes and Hoist in IMEF

Energy Technology Data Exchange (ETDEWEB)

Soong, Woong Sup; Oh, Yon Woo; Ahn, Sang Bock; Park, Dae Gue; Whang, Ryoung Wha

1999-07-01

Crane and hoist of 11 sets are installed int the Irradiated Material Examination Facility (IMEF). IMEF is divided into two parts such as hot cell area and service area. 30/5-ton overhead crane is installed in service area for transfer of irradiated material transportation cask and other several kinds of heavy equipment. This report describes maintenance techniques, repair procedure, daily and special checking list, which will ensure safety in routine operation and even in abnormality. (author). 8 refs.

Operation and maintenance techniques of cranes and Hoist in IMEF

International Nuclear Information System (INIS)

Soong, Woong Sup; Oh, Yon Woo; Ahn, Sang Bock; Park, Dae Gue; Whang, Ryoung Wha

1999-07-01

Crane and hoist of 11 sets are installed int the Irradiated Material Examination Facility (IMEF). IMEF is divided into two parts such as hot cell area and service area. 30/5-ton overhead crane is installed in service area for transfer of irradiated material transportation cask and other several kinds of heavy equipment. This report describes maintenance techniques, repair procedure, daily and special checking list, which will ensure safety in routine operation and even in abnormality. (author). 8 refs

Design of hoisting device used in nuclear power plants. KTA safety engineering code. Draft amendment, as of 6/98

International Nuclear Information System (INIS)

1998-06-01

The draft amendment specifies, according to the hazards involved, (a) the general provisions, (b) additional provisions supplementing the general provisions, (c) more stringent provisions relating to aggravated risks, applicable to lifting gear, and (d) additional requirements for elevators in reactor containments and refuelling equipment, to be taken into account in the design of hoisting device used in nuclear power plants. The term hoisting device in this context covers elevators, cranes, winches, trolleys, load carrying equipment, and LWR refuelling machines as are used in nuclear power plants. (orig./CB) [de

Transient vibration phenomena in deep mine hoisting cables. Part 1: Mathematical model

Science.gov (United States)

Kaczmarczyk, S.; Ostachowicz, W.

2003-04-01

The classical moving co-ordinate frame approach and Hamilton's principle are employed to derive a distributed-parameter mathematical model to investigate the dynamic behaviour of deep mine hoisting cables. This model describes the coupled lateral-longitudinal dynamic response of the cables in terms of non-linear partial differential equations that accommodate the non-stationary nature of the system. Subsequently, the Rayleigh-Ritz procedure is applied to formulate a discrete mathematical model. Consequently, a system of non-linear non-stationary coupled second order ordinary differential equations arises to govern the temporal behaviour of the cable system. This discrete model with quadratic and cubic non-linear terms describes the modal interactions between lateral oscillations of the catenary cable and longitudinal oscillations of the vertical rope. It is shown that the response of the catenary-vertical rope system may feature a number of resonance phenomena, including external, parametric and autoparametric resonances. The parameters of a typical deep mine winder are used to identify the depth locations of the resonance regions during the ascending cycles with various winding velocities.

Study on friction behaviour of brake shoe materials for mining hoist

Science.gov (United States)

Ungureanu, M.; Ungureanu, N. S.; Crăciun, I.

2017-02-01

The friction coefficient in the brake linkages has an important influence on the braking efficiency and safety of machines. The paper presents a method for the study of the friction coefficient of the friction couple brake shoe-drum for mining hoist. In this context, it is interesting to define the friction coefficient, not just according to the materials in contact, but according to the entire ensemble of tribological factors of the friction couple.

Adaptive output-based command shaping for sway control of a 3D overhead crane with payload hoisting and wind disturbance

Science.gov (United States)

Abdullahi, Auwalu M.; Mohamed, Z.; Selamat, H.; Pota, Hemanshu R.; Zainal Abidin, M. S.; Ismail, F. S.; Haruna, A.

2018-01-01

Payload hoisting and wind disturbance during crane operations are among the challenging factors that affect a payload sway and thus, affect the crane's performance. This paper proposes a new online adaptive output-based command shaping (AOCS) technique for an effective payload sway reduction of an overhead crane under the influence of those effects. This technique enhances the previously developed output-based command shaping (OCS) which was effective only for a fixed system and without external disturbances. Unlike the conventional input shaping design technique which requires the system's natural frequency and damping ratio, the proposed technique is designed by using the output signal and thus, an online adaptive algorithm can be formulated. To test the effectiveness of the AOCS, experiments are carried out using a laboratory overhead crane with a payload hoisting in the presence of wind, and with different payloads. The superiority of the method is confirmed by 82% and 29% reductions in the overall sway and the maximum transient sway respectively, when compared to the OCS, and two robust input shapers namely Zero Vibration Derivative-Derivative and Extra-Insensitive shapers. Furthermore, the method demonstrates a uniform crane's performance under all conditions. It is envisaged that the proposed method can be very useful in designing an effective controller for a crane system with an unknown payload and under the influence of external disturbances.

On the Effect of Thermophysical Properties of Clothing on the Heat Strain Predicted by PHS Model.

Science.gov (United States)

d'Ambrosio Alfano, Francesca Romana; Palella, Boris Igor; Riccio, Giuseppe; Malchaire, Jacques

2016-03-01

Procedures and equations reported in ISO 9920 for the correction of basic thermophysical clothing properties taking into account pumping effect and air movement are very different from those used by the Predicted Heat Strain (PHS) model in ISO 7933. To study the effect of these differences on the assessment of hot environments using the PHS model, an analysis focusing on the modelling of the dynamic thermal insulation and the vapour resistance of the clothing reported in ISO 9920 and ISO 7933 standards will be discussed in this paper. The results are useful evidence to start a discussion on the best practice for dealing with clothing thermophysical properties and underline the need to harmonize the entire set of standards in the field of the Ergonomics of the Thermal Environment. ISO 7933 is presently under revision. © The Author 2015. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Research on magnetic excitation model of magnetic flux leakage for coal mine hoisting wire rope

Directory of Open Access Journals (Sweden)

Jie Tian

2015-11-01

Full Text Available This study presents the optimal design of a magnetic excitation model for developing a nondestructive sensor for coal mine hoist wire ropes. The model was established using axial-symmetry finite-element analysis and calculations. The influence of the excitation device parameters on the local magnetization effect of the wire rope was investigated in detail using the axial-symmetry finite-element model. The excitation model parameters of the sensor were optimally designed using a combination of finite-element analysis and an optimization method. The experiments were performed to measure the leakage flux and evaluate the performance of the optimally designed sensor. The results show that the sensor based on the newly designed excitation model can not only improve the signal-to-noise ratio for defect detection in a coal mine hoist wire rope by 11% compared to an existing sensor but also reliably detect small defects with a high detection speed (5 m/s along the length of the coal mine wire rope.

Photovoltaic pump systems

Science.gov (United States)

Klockgether, J.; Kiessling, K. P.

1983-09-01

Solar pump systems for the irrigation of fields and for water supply in regions with much sunshine are discussed. For surface water and sources with a hoisting depth of 12 m, a system with immersion pumps is used. For deep sources with larger hoisting depths, an underwater motor pump was developed. Both types of pump system meet the requirements of simple installation and manipulation, safe operation, maintenance free, and high efficiency reducing the number of solar cells needed.

29 CFR 570.58 - Occupations involved in the operation of power-driven hoisting apparatus (Order 7).

Science.gov (United States)

2010-07-01

... hoisting apparatus (Order 7). 570.58 Section 570.58 Labor Regulations Relating to Labor (Continued) WAGE... trucks, or stacking trucks, but shall not mean low-lift trucks or low-lift platform trucks that are... stacking trucks, but shall not mean low-lift trucks or low-lift platform trucks that are designed for the...

Radiotherapy of the periarthritis humeroscapularis. Indication, technique and radiation results; Periarthritis humeroscapularis (PHS). Indikation, Technik und Bestrahlungsergebnisse

Energy Technology Data Exchange (ETDEWEB)

Keilholz, L. [Erlangen-Nuernberg Univ., Erlangen (Germany). Strahlentherapeutische Klinik; Seegenschmiedt, M.H. [Erlangen-Nuernberg Univ., Erlangen (Germany). Strahlentherapeutische Klinik; Kutzki, D. [Erlangen-Nuernberg Univ., Erlangen (Germany). Strahlentherapeutische Klinik; Sauer, R. [Erlangen-Nuernberg Univ., Erlangen (Germany). Strahlentherapeutische Klinik

1995-07-01

106 patients with clinically evident disease of PHS were treated between January 1987 and May 1991. 73/106 patients had a continuous follow-up. 16/73 patients showed typical symptoms on both shoulders; therefore a total of 89 shoulders were examined in this investigation. A daily dose of 0.5 Gy was given for 3 times a week and a total dose of 3.0 Gy. After 8 weeks a second treatment course was performed. In follow-up the subjective (pain) and objective (limitation of abduction) symptoms were classified in 3 grade scales. A marked pain reduction and an improved mobility (abduction of at least 20 degrees more than before radiation) could be observed in 72/89 shoulders (81%). 44/89 shoulders (49%) showed an excellent response and were competely free of pain and impairment of motion. Radiotherapy of acute or subacute Periarthritis humeroscapularis is a very effective treatment if radiation starts within the first year of symptoms and if it is supported by physiotherapy. (orig.) [Deutsch] Im Zeitraum vom 1.1.1987 bis 1.5.1991 wurden an der Klinik fuer Strahlentherapie, Erlangen, 106 Patienten wegen einer Periarthritis humeroscapularis (PHS) behandelt. 73 Patienten konnten regelmaessig nachuntersucht werden. Von diesen litten 16 an einer beidseitigen PHS, so dass insgesamt 89 Lokalisationen untersucht wurden. Es wurden zwei Bestrahlungsserien (im Abstand von acht Wochen) mit einer Referenzdosis von 3 Gy pro Seite, bei einer Einzeldosis von 0,5 Gy, dreimal woechentlich verabreicht. Die Beurteilung des Therapieerfolges erfolgte nach drei subjektiven Beschwerdegraden und drei objektiven Graden. Eine Besserung der subjektiven Beschwerden um einen Grad und er Schultergelekbeweglichkeit (Abduktion) um mindestens 20 Grad trat bei 72 behandelten Schultergelenken (81%) auf. Bei 44 Schultergelenken (49%) erreichten wir eine komplette Beschwerdefreiheit. Die Radiotherapie der akuten wie subakuten Periarthritis humeroscapularis ist hocheffektiv, insbesondere dann, wenn Bestrahlung

Reduced starch granule number per chloroplast in the dpe2/phs1 mutant is dependent on initiation of starch degradation.

Science.gov (United States)

Malinova, Irina; Fettke, Joerg

2017-01-01

An Arabidopsis double knock-out mutant lacking cytosolic disproportionating enzyme 2 (DPE2) and the plastidial phosphorylase (PHS1) revealed a dwarf-growth phenotype, reduced starch content, an uneven distribution of starch within the plant rosette, and a reduced number of starch granules per chloroplast under standard growth conditions. In contrast, the wild type contained 5-7 starch granules per chloroplast. Mature and old leaves of the double mutant were essentially starch free and showed plastidial disintegration. Several analyses revealed that the number of starch granules per chloroplast was affected by the dark phase. So far, it was unclear if it was the dark phase per se or starch degradation in the dark that was connected to the observed decrease in the number of starch granules per chloroplast. Therefore, in the background of the double mutant dpe2/phs1, a triple mutant was generated lacking the initial starch degrading enzyme glucan, water dikinase (GWD). The triple mutant showed improved plant growth, a starch-excess phenotype, and a homogeneous starch distribution. Furthermore, the number of starch granules per chloroplast was increased and was similar to wild type. However, starch granule morphology was only slightly affected by the lack of GWD as in the triple mutant and, like in dpe2/phs1, more spherical starch granules were observed. The characterized triple mutant was discussed in the context of the generation of starch granules and the formation of starch granule morphology.

Study on synthesizing Mg/Al layered double hydroxides at different pHs

Directory of Open Access Journals (Sweden)

E Otgonjargal

2014-12-01

Full Text Available Mg/Al layered double hydroxide (LDH was successfully synthesized at different pHs values. The Mg/AL LDH was well characterized by X-Ray diffraction and Fourier transform infrared analysis. The morphology of the LDH was observed using Scanning electron microscopy with energy dispersive X-ray spectroscopy. The influence of pH values on the morphology of the Mg/Al LDHs were studied. The result showed that the well-synthesized Mg/Al LDHs could be obtained when the pH value was about 10.0 at room temperature.DOI: http://doi.dx.org/10.5564/mjc.v15i0.319 Mongolian Journal of Chemistry 15 (41, 2014, p36-39

The Gravity Probe B Payload Hoisted by Crane

Science.gov (United States)

2001-01-01

The Gravity Probe B (GP-B) payload was hoisted by crane to the transportation truck in the W.W. Hansen Experimental Physics Laboratory in Stanford, California for shipment to the launch site at Vandenburg Air Force Base. GP-B is the relativity experiment being developed at Stanford University to test two extraordinary predictions of Albert Einstein's general theory of relativity. The experiment will measure, very precisely, the expected tiny changes in the direction of the spin axes of four gyroscopes contained in an Earth-orbiting satellite at a 400-mile altitude. So free are the gyroscopes from disturbance that they will provide an almost perfect space-time reference system. They will measure how space and time are very slightly warped by the presence of the Earth, and, more profoundly, how the Earth's rotation very slightly drags space-time around with it. These effects, though small for the Earth, have far-reaching implications for the nature of matter and the structure of the Universe. GP-B is among the most thoroughly researched programs ever undertaken by NASA. This is the story of a scientific quest in which physicists and engineers have collaborated closely over many years. Inspired by their quest, they have invented a whole range of technologies that are already enlivening other branches of science and engineering. Launched April 20, 2004, the GP-B program was managed for NASA by the Marshall Space Flight Center. Development of the GP-B is the responsibility of Stanford University, along with major subcontractor Lockheed Martin Corporation. (Photo Credit: Stanford University)

Effects of Strand Lay Direction and Crossing Angle on Tribological Behavior of Winding Hoist Rope

Directory of Open Access Journals (Sweden)

Xiang-dong Chang

2017-06-01

Full Text Available Friction and wear behavior exists between hoisting ropes that are wound around the drums of a multi-layer winding hoist. It decreases the service life of ropes and threatens mine safety. In this research, a series of experiments were conducted using a self-made test rig to study the effects of the strand lay direction and crossing angle on the winding rope’s tribological behavior. Results show that the friction coefficient in the steady-state period shows a decreasing tendency with an increase of the crossing angle in both cross directions, but the variation range is different under different cross directions. Using thermal imaging, the high temperature regions always distribute along the strand lay direction in the gap between adjacent strands, as the cross direction is the same with the strand lay direction (right cross contact. Additionally, the temperature rise in the steady-state increases with the increase of the crossing angle in both cross directions. The differences of the wear scar morphology are obvious under different cross directions, especially for the large crossing angle tests. In the case of right cross, the variation range of wear mass loss is larger than that in left cross. The damage that forms on the wear surface is mainly ploughing, pits, plastic deformation, and fatigue fracture. The major wear mechanisms are adhesive wear, and abrasive and fatigue wear.

Effects of Strand Lay Direction and Crossing Angle on Tribological Behavior of Winding Hoist Rope.

Science.gov (United States)

Chang, Xiang-Dong; Peng, Yu-Xing; Zhu, Zhen-Cai; Gong, Xian-Sheng; Yu, Zhang-Fa; Mi, Zhen-Tao; Xu, Chun-Ming

2017-06-09

Friction and wear behavior exists between hoisting ropes that are wound around the drums of a multi-layer winding hoist. It decreases the service life of ropes and threatens mine safety. In this research, a series of experiments were conducted using a self-made test rig to study the effects of the strand lay direction and crossing angle on the winding rope's tribological behavior. Results show that the friction coefficient in the steady-state period shows a decreasing tendency with an increase of the crossing angle in both cross directions, but the variation range is different under different cross directions. Using thermal imaging, the high temperature regions always distribute along the strand lay direction in the gap between adjacent strands, as the cross direction is the same with the strand lay direction (right cross contact). Additionally, the temperature rise in the steady-state increases with the increase of the crossing angle in both cross directions. The differences of the wear scar morphology are obvious under different cross directions, especially for the large crossing angle tests. In the case of right cross, the variation range of wear mass loss is larger than that in left cross. The damage that forms on the wear surface is mainly ploughing, pits, plastic deformation, and fatigue fracture. The major wear mechanisms are adhesive wear, and abrasive and fatigue wear.

High Laccase Expression by Trametes versicolor in a Simulated Textile Effluent with Different Carbon Sources and PHs

Directory of Open Access Journals (Sweden)

Cristiane Ottoni

2016-08-01

Full Text Available Textile effluents are highly polluting and have variable and complex compositions. They can be extremely complex, with high salt concentrations and alkaline pHs. A fixed-bed bioreactor was used in the present study to simulate a textile effluent treatment, where the white-rot fungus, Trametes versicolor, efficiently decolourised the azo dye Reactive Black 5 over 28 days. This occurred under high alkaline conditions, which is unusual, but advantageous, for successful decolourisation processes. Active dye decolourisation was maintained by operation in continuous culture. Colour was eliminated during the course of operation and maximum laccase (Lcc activity (80.2 U∙L−1 was detected after glycerol addition to the bioreactor. Lcc2 gene expression was evaluated with different carbon sources and pH values based on reverse transcriptase-PCR (polymerase chain reaction. Glycerol was shown to promote the highest lcc2 expression at pH 5.5, followed by sucrose and then glucose. The highest levels of expression occurred between three and four days, which corroborate the maximum Lcc activity observed for sucrose and glycerol on the bioreactor. These results give new insights into the use of T. versicolor in textile dye wastewater treatment with high pHs.

Aqueous poly(amidoamine) dendrimer G3 and G4 generations with several interior cores at pHs 5 and 7: a molecular dynamics simulation study.

Science.gov (United States)

Kavyani, Sajjad; Amjad-Iranagh, Sepideh; Modarress, Hamid

2014-03-27

Poly(amidoamine) (PAMAM) dendrimers play an important role in drug delivery systems, because the dendrimers are susceptible to gain unique features with modification of their structure such as changing their terminals or improving their interior core. To investigate the core improvement and the effect of core nature on PAMAM dendrimers, we studied two generations G3 and G4 PAMAM dendrimers with the interior cores of commonly used ethylendiamine (EDA), 1,5-diaminohexane (DAH), and bis(3-aminopropyl) ether (BAPE) solvated in water, as an aqueous dendrimer system, by using molecular dynamics simulation and applying a coarse-grained (CG) dendrimer force field. To consider the electrostatic interactions, the simulations were performed at two protonation states, pHs 5 and 7. The results indicated that the core improvement of PAMAM dendrimers with DAH produces the largest size for G3 and G4 dendrimers at both pHs 5 and 7. The increase in the size was also observed for BAPE core but it was not so significant as that for DAH core. By considering the internal structure of dendrimers, it was found that PAMAM dendrimer shell with DAH core had more cavities than with BAPE core at both pHs 5 and 7. Also the moment of inertia calculations showed that the generation G3 is more open-shaped and has higher structural asymmetry than the generation G4. Possessing these properties by G3, specially due to its structural asymmetry, make penetration of water beads into the dendrimer feasible. But for higher generation G4 with its relatively structural symmetry, the encapsulation efficiency for water molecules can be enhanced by changing its core to DAH or BAPE. It is also observed that for the higher generation G4 the effect of core modification is more profound than G3 because the core modification promotes the structural asymmetry development of G4 more significantly. Comparing the number of water beads that penetrate into the PAMAM dendrimers for EDA, DAH, and BAPE cores indicates a

Epicondylopathia humeri (EPH) and peritendinitis humeroscapularis (PHS): evaluation of radiation therapy long-term results and literature review

International Nuclear Information System (INIS)

Seegenschmiedt, M.H.; Keilholz, L.

1998-01-01

Background: The effectiveness of radiotherapy (RT) for degenerative inflammatory disorders has been clinically documented in historical studies, but long-term follow-up and assessment with objective criteria are still not available. Patients and methods: From 1986 to 1991, 200 consecutive patients with symptomatic epicondylopathia humeri (EPH, n=104) and peritendinitis humeroscapularis (PHS, n=96) were referred to our clinic. All patients were refractory to conventional therapy prior to irradiation. One hundred fifty-six patients with 192 sites (due to bilateral symptoms) received a full treatment course and were available for long-term follow-up, i.e. 83 patients with 93 elbows and 73 patients with 89 shoulders. The treatment response was evaluated with regard to pain symptoms grouped into five categories (pain at strain, pain at night, persistent pain during daytime, pain at rest and morning stiffness) and four grades (none, mild, moderate and severe) and with regard to established orthopedic scores (Morrey score and Constant and Murley score). The analysis was performed before and 6 weeks after RT and at last follow-up. All joints received two RT series applied in three weekly fractions (EPH, 6x1 Gy (total 12 Gy); PHS, 6x0.5 Gy (total 6 Gy)). The second RT series started 6 weeks after the first RT series. The minimum follow-up was 1 year for both groups and the mean follow-up reached 4 years (range 1-8 years). Results: Fifty elbows (43 patients) and 44 shoulders (39 patients) achieved complete pain relief in all pain categories; 24 elbows and 28 shoulders substantially improved, i.e. had only minor symptoms. Thus, 74 elbows and 72 shoulders responded to RT. Nineteen elbows (17 patients) had surgery after RT due to persisting symptoms or subjective dissatisfaction; 17 shoulders (12 patients) were non-responders and five of those were operated on; seven elbows and one shoulder were completely free of pain after surgery. The mean Morrey score improved by 18 points

Advanced airway management in hoist and longline operations in mountain HEMS - considerations in austere environments: a narrative review This review is endorsed by the International Commission for Mountain Emergency Medicine (ICAR MEDCOM).

Science.gov (United States)

Pietsch, Urs; Knapp, Jürgen; Kreuzer, Oliver; Ney, Ludwig; Strapazzon, Giacomo; Lischke, Volker; Albrecht, Roland; Phillips, Patrick; Rauch, Simon

2018-04-03

Providing sufficient oxygenation and ventilation is of paramount importance for the survival of emergency patients. Therefore, advanced airway management is one of the core tasks for every rescue team. Endotracheal intubation is the gold standard to secure the airway in the prehospital setting. This review aims to highlight special considerations for advanced airway management preceding human external cargo (HEC) evacuations. We systematically searched MEDLINE, EMBASE, and PubMed in August 2017 for articles on airway management and ventilation in patients before hoist or longline operation in HEMS. Relevant reference lists were hand-searched. Three articles with regard to advanced airway management and five articles concerning the epidemiology of advanced airway management in hoist or longline rescue missions were included. We found one case report regarding ventilation during hoist operations. The exact incidence of advanced airway management before evacuation of a patient by HEC is unknown but seems to be very low (< 5%). There are several hazards which can impede mechanical ventilation of patients during HEC extractions: loss of equipment, hyperventilation, inability to ventilate and consequent hypoxia, as well as inadequacy of monitoring. Advanced airway management prior to HEC operation is rarely performed. If intubation before helicopter hoist operations (HHO) and human cargo sling (HCS) extraction is considered by the rescue team, a risk/benefit analysis should be performed and a clear standard operating procedure (SOP) should be defined. Continuous and rigorous training including the whole crew is required. An international registry on airway management during HEC extraction would be desirable.

Modeling assumptions influence on stress and strain state in 450 t cranes hoisting winch construction

Directory of Open Access Journals (Sweden)

Damian GĄSKA

2011-01-01

Full Text Available This work investigates the FEM simulation of stress and strain state of the selected trolley’s load-carrying structure with 450 tones hoisting capacity [1]. Computational loads were adopted as in standard PN-EN 13001-2. Model of trolley was built from several cooperating with each other (in contact parts. The influence of model assumptions (simplification in selected construction nodes to the value of maximum stress and strain with its area of occurrence was being analyzed. The aim of this study was to determine whether the simplification, which reduces the time required to prepare the model and perform calculations (e.g., rigid connection instead of contact are substantially changing the characteristics of the model.

System Engineering Analysis of Topside Cranes Installed on AD, AR, and AS Class Ships

Science.gov (United States)

1982-02-06

4 severity CASREPs. Water or moisture in oumzs or motors accounted for five CASREPs; moisture in a transformer caused a class C fire , which resulted...Components of Bridge Cranes, Monorail Hoist Systems, and Side Port Hoists Associated Equipment: Accumulators Ladders Speed reducers Brakes Load blocks...Switches Bridge Locking devices *Tow bars Bumpers * Monorails Tracks Collector assembly Motors (electrical *Trolley buses Controller and hydraulic) *Trolleys

Occupational heat stress and associated productivity loss estimation using the PHS model (ISO 7933): a case study from workplaces in Chennai, India

Science.gov (United States)

Lundgren, Karin; Kuklane, Kalev; Venugopal, Vidhya

2014-01-01

Background Heat stress is a major occupational problem in India that can cause adverse health effects and reduce work productivity. This paper explores this problem and its impacts in selected workplaces, including industrial, service, and agricultural sectors in Chennai, India. Design Quantitative measurements of heat stress, workload estimations, and clothing testing, and qualitative information on health impacts, productivity loss, etc., were collected. Heat strain and associated impacts on labour productivity between the seasons were assessed using the International Standard ISO 7933:2004, which applies the Predicted Heat Strain (PHS) model. Results and conclusions All workplaces surveyed had very high heat exposure in the hot season (Wet Bulb Globe Temperature x¯ =29.7), often reaching the international standard safe work values (ISO 7243:1989). Most workers had moderate to high workloads (170–220 W/m2), with some exposed to direct sun. Clothing was found to be problematic, with high insulation values in relation to the heat exposure. Females were found to be more vulnerable because of the extra insulation added from wearing a protective shirt on top of traditional clothing (0.96 clo) while working. When analysing heat strain – in terms of core temperature and dehydration – and associated productivity loss in the PHS model, the parameters showed significant impacts that affected productivity in all workplaces, apart from the laundry facility, especially during the hot season. For example, in the canteen, the core temperature limit of 38°C predicted by the model was reached in only 64 min for women. With the expected increases in temperature due to climate change, additional preventive actions have to be implemented to prevent further productivity losses and adverse health impacts. Overall, this study presented insight into using a thermo-physiological model to estimate productivity loss due to heat exposure in workplaces. This is the first time the PHS

Occupational heat stress and associated productivity loss estimation using the PHS model (ISO 7933): a case study from workplaces in Chennai, India.

Science.gov (United States)

Lundgren, Karin; Kuklane, Kalev; Venugopal, Vidhya

2014-01-01

Heat stress is a major occupational problem in India that can cause adverse health effects and reduce work productivity. This paper explores this problem and its impacts in selected workplaces, including industrial, service, and agricultural sectors in Chennai, India. Quantitative measurements of heat stress, workload estimations, and clothing testing, and qualitative information on health impacts, productivity loss, etc., were collected. Heat strain and associated impacts on labour productivity between the seasons were assessed using the International Standard ISO 7933:2004, which applies the Predicted Heat Strain (PHS) model. All workplaces surveyed had very high heat exposure in the hot season (Wet Bulb Globe Temperature =29.7), often reaching the international standard safe work values (ISO 7243:1989). Most workers had moderate to high workloads (170-220 W/m2), with some exposed to direct sun. Clothing was found to be problematic, with high insulation values in relation to the heat exposure. Females were found to be more vulnerable because of the extra insulation added from wearing a protective shirt on top of traditional clothing (0.96 clo) while working. When analysing heat strain--in terms of core temperature and dehydration--and associated productivity loss in the PHS model, the parameters showed significant impacts that affected productivity in all workplaces, apart from the laundry facility, especially during the hot season. For example, in the canteen, the core temperature limit of 38°C predicted by the model was reached in only 64 min for women. With the expected increases in temperature due to climate change, additional preventive actions have to be implemented to prevent further productivity losses and adverse health impacts. Overall, this study presented insight into using a thermo-physiological model to estimate productivity loss due to heat exposure in workplaces. This is the first time the PHS model has been used for this purpose. An exploratory

Occupational heat stress and associated productivity loss estimation using the PHS model (ISO 7933: a case study from workplaces in Chennai, India

Directory of Open Access Journals (Sweden)

Karin Lundgren

2014-11-01

Full Text Available Background: Heat stress is a major occupational problem in India that can cause adverse health effects and reduce work productivity. This paper explores this problem and its impacts in selected workplaces, including industrial, service, and agricultural sectors in Chennai, India. Design: Quantitative measurements of heat stress, workload estimations, and clothing testing, and qualitative information on health impacts, productivity loss, etc., were collected. Heat strain and associated impacts on labour productivity between the seasons were assessed using the International Standard ISO 7933:2004, which applies the Predicted Heat Strain (PHS model. Results and conclusions: All workplaces surveyed had very high heat exposure in the hot season (Wet Bulb Globe Temperature x¯ =29.7, often reaching the international standard safe work values (ISO 7243:1989. Most workers had moderate to high workloads (170–220 W/m2, with some exposed to direct sun. Clothing was found to be problematic, with high insulation values in relation to the heat exposure. Females were found to be more vulnerable because of the extra insulation added from wearing a protective shirt on top of traditional clothing (0.96 clo while working. When analysing heat strain – in terms of core temperature and dehydration – and associated productivity loss in the PHS model, the parameters showed significant impacts that affected productivity in all workplaces, apart from the laundry facility, especially during the hot season. For example, in the canteen, the core temperature limit of 38°C predicted by the model was reached in only 64 min for women. With the expected increases in temperature due to climate change, additional preventive actions have to be implemented to prevent further productivity losses and adverse health impacts. Overall, this study presented insight into using a thermo-physiological model to estimate productivity loss due to heat exposure in workplaces. This is the

Mining Research on Vibration Signal Association Rules of Quayside Container Crane Hoisting Motor Based on Apriori Algorithm

Science.gov (United States)

Yang, Chencheng; Tang, Gang; Hu, Xiong

2017-07-01

Shore-hoisting motor in the daily work will produce a large number of vibration signal data,in order to analyze the correlation among the data and discover the fault and potential safety hazard of the motor, the data are discretized first, and then Apriori algorithm are used to mine the strong association rules among the data. The results show that the relationship between day 1 and day 16 is the most closely related, which can guide the staff to analyze the work of these two days of motor to find and solve the problem of fault and safety.

Direct ultimate disposal of spent fuel. Simulation of shaft transport. Probabilistic safety analysis of a shaft hoisting equipment for a max. payload of 85 t (TA 11)

International Nuclear Information System (INIS)

Filbert, W.; Leicht, R.; Schaub, B.

1994-03-01

The reported PSA examined transport processes involved in the direct disposal of POLLUX containers in a radwaste repository. The processes analysed are loading of the hoisting cage above ground, shaft transport to the underground storage place, and discharge from the hoisting cage and emplacement of the container. The PSA results yield data defining the rate of occurrence of events described in the following, for an overall operating time of 10.000 transport processes, average duration of 30 minutes each. The events considered are: Class (1), (elevated radiation doses), probabilistic occurrence rate of 5.2 events per calendar year; Class (2), (release of radioactive materials), probabilistic occurrence rate of 1.33 x 10 -6 per calender year. These results are also applicable to the emplacement of other waste forms which are planned to be disposed of in the same radwaste site as the POLLUX containers. (orig./HP) [de

Underground transportation and handling system for Pollux-casks

International Nuclear Information System (INIS)

Schrimpf, C.

1988-01-01

The concept for the underground transportation and handling system for Pollux-casks was optimized in a first phase by dividing the process in the repository up into the several transportation and manipulation steps. For each step, the possibilities were described and evaluated by means of a list of criteria (technical, safety and economical criteria). The following concept for the transportation and handling was developed: The casks are transported to the unloading area of the surface facilities by railway or truck. After removal of the transport protection, the entry control is performed. The cask is lifted from the vehicle and placed on a railbound transportation vehicle. This transport unit is transferred to the shaft and placed there ready for shaft hoisting. With the hoisting cage protruding, the transport unit is placed on the hoisting cage by means of a pushing-on device, locked, and then conveyed underground. After arrival on the emplacement level, the transport unit is pulled-off from the hoisting cage and taken over by a mine locomotive and transferred through the transportation and access drifts as far as to the emplacement site. There the locomotive pushed the rail transport vehicle into the emplacement drift, as far as to the designated emplacement position. At the emplacement position, the cask is again lifted by means of hoisting equipment. The rail transport vehicle is pulled out of the emplacement drift and returned to the surface for reloading. After deposition of the cask on the drift floor, the emplacement equipment is pulled back in order to give the operation space free for the slinger backfill truck. Within preceding tests two different backfilling techniques were investigated under realistic conditions: pneumatic backfilling and slinger backfilling. The slinger truck was found to be the most suitable for the designated purpose

Designing shafts for handling high-level radioactive wastes in mined geologic repositories

International Nuclear Information System (INIS)

Hambley, D.F.; Morris, J.R.

1988-01-01

Waste package conceptual designs developed in the United States by the U.S. Department of Energy's Office of Civilian Radioactive Waste Management are the basis for specifying the dimensions and weights of the waste package and transfer cask combinations to be hoisted in the waste handling shafts in mined geologic repositories for high-level radioactive waste. The hoist, conveyance, counterweight, and hoist ropes are then sized. Also taken into consideration are overwind and underwind arrestors and safety features required by the U.S. Nuclear Regulatory Commission. Other design features such as braking systems, chairing system design, and hoisting speed are considered in specifying waste hoisting system parameters for example repository sites

A remote maintenance robot system for a pulsed nuclear reactor

International Nuclear Information System (INIS)

Thunborg, S.

1987-01-01

This paper presents a remote maintenance robot system for use in a hazardous environment. The system consists of turntable, robot and hoist subsystems which operate under the control of a supervisory computer to perform coordinated programmed maintenance operations on a pulsed nuclear reactor. The system is operational

30 CFR 75.1404-1 - Braking system.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Braking system. 75.1404-1 Section 75.1404-1... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Hoisting and Mantrips § 75.1404-1 Braking system. A locomotive equipped with a dual braking system will be deemed to satisfy the requirements of § 75.1404 for a...

The effectiveness of the installation of a mobile voice communication system in a university hospital.

Science.gov (United States)

Hanada, Eisuke; Fujiki, Tadayoshi; Nakakuni, Hideaki; Sullivan, Corbet Vernon

2006-04-01

In large hospitals, collaborative clinical practice is currently emphasized, with members of various departments expected to work as a team. The importance of accurate communication among the team members is of utmost importance. To improve such communication, the introduction of mobile voice communication systems has received much attention in Japan. Shimane University Hospital also introduced a Personal Handy-phone System (PHS) for doctors. In the traditional setting, much time was wasted searching for doctors through multiple calls on fixed-line telephones. In order to measure the effectiveness of our system, the change in the number of calls made on fixed-line telephones before and after PHS installation was compared. The total number of calls was reduced by more than 35%, and the number of calls to the wards on weekdays was reduced by half. Mobile telecommunication systems with small output power, such as PHS, are known to cause little interference with medical devices which makes it possible to use mobile voice communication safely in hospitals. The improvement in communication by this systems resulted in an improvement in labor efficiency.

Survivability and growth kinetics of methanogenic archaea at various pHs and pressures: Implications for deep subsurface life on Mars

Science.gov (United States)

Sinha, Navita; Nepal, Sudip; Kral, Timothy; Kumar, Pradeep

2017-02-01

Life as we know it requires liquid water and sufficient liquid water is highly unlikely on the surface of present-day Mars. However, according to thermal models there is a possibility of liquid water in the deep subsurface of Mars. Thus, the martian subsurface, where the pressure and temperature is higher, could potentially provide a hospitable environment for a biosphere. Also, methane has been detected in the Mars' atmosphere. Analogous to Earth's atmospheric methane, martian methane could also be biological in origin. The carbon and energy sources for methanogenesis in the subsurface of Mars could be available by downwelling of atmospheric CO2 into the regolith and water-rock reactions such as serpentinization, respectively. Corresponding analogs of the martian subsurface on Earth might be the active sites of serpentinization at depths where methanogenic thermophilic archaea are the dominant species. Methanogens residing in Earth's hydrothermal environments are usually exposed to a variety of physiological stresses including a wide range of pressures, temperatures, and pHs. Martian geochemical models imply that the pH of probable groundwater varies from 4.96 to 9.13. In this work, we used the thermophilic methanogen, Methanothermobacter wolfeii, which grows optimally at 55oC. Therefore, a temperature of 55oC was chosen for these experiments, possibly simulating Mars' subsurface temperature. A martian geophysical model suggests depth and pressure corresponding to a temperature of 55 °C would be between 1-30 km and 100-3,000 atm respectively. Here, we have simulated Mars deep subsurface pH, pressure, and temperature conditions and have investigated the survivability, growth rate, and morphology of M. wolfeii after exposure to a wide range of pH 5-9) and pressure (1-1200 atm) at a temperature of 55 °C. Interestingly, in this study we have found that M. wolfeii was able to survive at all the pressures and pHs tested at 55 °C. In order to understand the effect of

On Distributed Port-Hamiltonian Process Systems

NARCIS (Netherlands)

Lopezlena, Ricardo; Scherpen, Jacquelien M.A.

2004-01-01

In this paper we use the term distributed port-Hamiltonian Process Systems (DPHPS) to refer to the result of merging the theory of distributed Port-Hamiltonian systems (DPHS) with the theory of process systems (PS). Such concept is useful for combining the systematic interconnection of PHS with the

Palanivelu hydatid system for safe and efficacious laparoscopic management of hepatic hydatid disease.

Science.gov (United States)

Palanivelu, C; Senthilkumar, R; Jani, K; Rajan, P S; Sendhilkumar, K; Parthasarthi, R; Rajapandian, S

2006-12-01

Hydatid disease, being endemic in several areas of the world, is of interest even to surgeons in non-endemic areas because they may encounter the disease due to ease and rapidity of travel as well as immigration. We describe a new device for laparoscopic management of hepatic hydatid disease. The special trocar-cannula system--the Palanivelu hydatid system (PHS)--and the technique of operation are described. A total of 75 patients were operated on using this technique. In 83.3% of patients, only evacuation of the hydatid cyst by the PHS was done. In 13.7%, this was followed by left lobectomy because the cysts were large, occupying almost the entire left lobe of the liver. The remnant cavity was dealt with by omentoplasty. The average follow-up period was 5.9 years, during which there were no recurrences. PHS is successful in preventing spillage, evacuating the contents of hydatid cysts, performing transcystic fenestration, and for dealing with cyst-biliary communications.

Comparison of warfarin therapy clinical outcomes following implementation of an automated mobile phone-based critical laboratory value text alert system.

Science.gov (United States)

Lin, Shu-Wen; Kang, Wen-Yi; Lin, Dong-Tsamn; Lee, James; Wu, Fe-Lin; Chen, Chuen-Liang; Tseng, Yufeng J

2014-01-01

Computerized alert and reminder systems have been widely accepted and applied to various patient care settings, with increasing numbers of clinical laboratories communicating critical laboratory test values to professionals via either manual notification or automated alerting systems/computerized reminders. Warfarin, an oral anticoagulant, exhibits narrow therapeutic range between treatment response and adverse events. It requires close monitoring of prothrombin time (PT)/international normalized ratio (INR) to ensure patient safety. This study was aimed to evaluate clinical outcomes of patients on warfarin therapy following implementation of a Personal Handy-phone System-based (PHS) alert system capable of generating and delivering text messages to communicate critical PT/INR laboratory results to practitioners' mobile phones in a large tertiary teaching hospital. A retrospective analysis was performed comparing patient clinical outcomes and physician prescribing behavior following conversion from a manual laboratory result alert system to an automated system. Clinical outcomes and practitioner responses to both alert systems were compared. Complications to warfarin therapy, warfarin utilization, and PT/INR results were evaluated for both systems, as well as clinician time to read alert messages, time to warfarin therapy modification, and monitoring frequency. No significant differences were detected in major hemorrhage and thromboembolism, warfarin prescribing patterns, PT/INR results, warfarin therapy modification, or monitoring frequency following implementation of the PHS text alert system. In both study periods, approximately 80% of critical results led to warfarin discontinuation or dose reduction. Senior physicians' follow-up response time to critical results was significantly decreased in the PHS alert study period (46.3% responded within 1 day) compared to the manual notification study period (24.7%; P = 0.015). No difference in follow-up response time

Development of backward equations T(p,h), T(p,s) and p(h,s) for heavy water liquid and vapor

International Nuclear Information System (INIS)

Nick P Petropoulos; Simos E Simopoulos

2005-01-01

Full text of publication follows: Backward equations for heavy water (a) temperature as a function of pressure and enthalpy T(p,h), (b) temperature as a function of pressure and entropy T(p,s) and (c) pressure as a function of enthalpy and entropy p(h,s) presented in this work, are based on the 'IAPS Formulation 1984 for the Thermodynamic Properties of Heavy Water Substance' [1], and also on the respective equations for the ordinary water substance as presented in 'The IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam' [2]. Heavy water and steam thermodynamic properties can be calculated using the basic equations and saturation equations that are included in [1]. However, [1] does not contain any backward functions T(p,h), T(p,s) and p(h,s), which are needed for heavy water thermodynamic process modeling. The development of the two temperature backward functions efficiently increases computational speed for temperature calculations more than three times as pointed out in the similar case problem for ordinary water, addressed successfully in [2]. Without these temperature backward functions calculations may be performed only iteratively using the heavy water state equations at a much greater computing cost. Moreover, the development of the pressure backward function saves even more computing time in modeling problems since two-dimensional iterations from the h(p,T) and s(p,T) heavy water functions may by effectively avoided. In addition, given the pressure function p(h,s), the heavy water temperature T(h,s) can be calculated by the temperature function T(p,h). The numerical consistencies of calculated T and p to the state equations included in [1] are sufficient for most applications in the heavy water nuclear reactors heat cycles. For applications, where the demands on numerical consistency and accuracy are rather high, iterations with the approved state equations may be necessary. In these cases both temperature and pressure

Wireless sound communication in a mine shaft using the example of the Merkury-F system

Energy Technology Data Exchange (ETDEWEB)

Miskiewicz, K; Wojaczek, A

1990-01-01

Discusses design and operation of the Merkury-F intrinsically safe communication system developed jointly by the EMAG center in Katowice and the Institute for Electrification and Automation of Mining of the Silesian Technical Institute in Gliwice. The system uses hoisting ropes for transmission of electromagnetic signals (long wave range) from a head frame station to a skip or a cage station. Wave propagation in the hoisting ropes, factors that influence wave propagation and effects of cage or skip position on wave propagation are analyzed. System parameters are the following: working frequency 100 Hz, sensitivity below 1 mV, output power more than 200 mV. Main elements of the system (head frame station, cage station, power supply, coupler with a coaxial cable, microphone, microphone transformer, etc.) are described. The Merkury-F communication system has been recommended for use in Polish underground coal mines. 3 refs.

Effect of external pH on the cytoplasmic and vacuolar pHs in Mung bean root-tip cells

International Nuclear Information System (INIS)

Torimitsu, Keiichi; Yazaki, Yoshiaki; Nagasuka, Kinuyo; Ohta, Eiji; Sakata, Makoto

1984-01-01

The effect of the external pH on the intracellular pH in mung bean (Vigna mungo (L.) Hepper) root-tip cells was investigated with the 31 P nuclear magnetic resonance (NMR) method. The 31 P NMR spectra showed three peaks caused by cytoplasmic G-6-P, cytoplasmic Psub(i) and vacuolar Psub(i). The cytoplasmic and vacuolar pHs could be determined by comparing the Psub(i) chemical shifts with the titration curve. When the external pH was changed over a range from pH 3 to 10, the cytoplasmic pH showed smaller changes than the vacuolar pH, suggesting that the former is regulated more strictly than the latter. The H + -ATPase inhibitor, DCCD, caused the breakdown of the mechanism that regulates the intracellular pH. H + -ATPase appears to have an important part in the regulation of the intracellular pH. (author)

Active Response Gravity Offload System

Science.gov (United States)

Valle, Paul; Dungan, Larry; Cunningham, Thomas; Lieberman, Asher; Poncia, Dina

2011-01-01

The Active Response Gravity Offload System (ARGOS) provides the ability to simulate with one system the gravity effect of planets, moons, comets, asteroids, and microgravity, where the gravity is less than Earth fs gravity. The system works by providing a constant force offload through an overhead hoist system and horizontal motion through a rail and trolley system. The facility covers a 20 by 40-ft (approximately equals 6.1 by 12.2m) horizontal area with 15 ft (approximately equals4.6 m) of lifting vertical range.

Seismic Analysis for a Crane System

Energy Technology Data Exchange (ETDEWEB)

Kim, Kang Soo; Lee, Chung Young; Ryu, Jeong Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2012-05-15

The operation bridge used for an open-pool type research reactor is a crane system with a working deck for the handling of in-pool parts such as fuels, reactor components and reactor utilization facilities. The operation bridge allows operators to access the top of the reactor in the reactor pool and the fuel storage racks in the service pool. The operation bridge contains an operating platform mounted on a truck travelling on rails. Upright members are mounted on the truck to support the upper structure and two hoist monorails. The operation bridge consists of two hoists, upper girder frames, legs, cables, saddle frames, upper deck frames, lower deck frames, and the ladder. Static and dynamic analyses are performed to evaluate the structural integrity for the operation bridge for the required design loadings. The response spectrum analysis is employed as a dynamic analysis method

Seismic Analysis for a Crane System

International Nuclear Information System (INIS)

Kim, Kang Soo; Lee, Chung Young; Ryu, Jeong Soo

2012-01-01

The operation bridge used for an open-pool type research reactor is a crane system with a working deck for the handling of in-pool parts such as fuels, reactor components and reactor utilization facilities. The operation bridge allows operators to access the top of the reactor in the reactor pool and the fuel storage racks in the service pool. The operation bridge contains an operating platform mounted on a truck travelling on rails. Upright members are mounted on the truck to support the upper structure and two hoist monorails. The operation bridge consists of two hoists, upper girder frames, legs, cables, saddle frames, upper deck frames, lower deck frames, and the ladder. Static and dynamic analyses are performed to evaluate the structural integrity for the operation bridge for the required design loadings. The response spectrum analysis is employed as a dynamic analysis method

Precise Positioning Method for Logistics Tracking Systems Using Personal Handy-Phone System Based on Mahalanobis Distance

Science.gov (United States)

Yokoi, Naoaki; Kawahara, Yasuhiro; Hosaka, Hiroshi; Sakata, Kenji

Focusing on the Personal Handy-phone System (PHS) positioning service used in physical distribution logistics, a positioning error offset method for improving positioning accuracy is invented. A disadvantage of PHS positioning is that measurement errors caused by the fluctuation of radio waves due to buildings around the terminal are large, ranging from several tens to several hundreds of meters. In this study, an error offset method is developed, which learns patterns of positioning results (latitude and longitude) containing errors and the highest signal strength at major logistic points in advance, and matches them with new data measured in actual distribution processes according to the Mahalanobis distance. Then the matching resolution is improved to 1/40 that of the conventional error offset method.

Method and system for connecting a loading buoy to a floating vessel. Fremgangsmte og system for tilkopling av en lastebye til et flytende farty

Energy Technology Data Exchange (ETDEWEB)

Breivik, K.; Kleppest, H.; Smedal, A.

1994-07-04

The invention deals with a method and a system for connecting a submerged loading/unloading buoy to a submerged receiving space in a floating vessel, for transfer of a medium, especially oil, to or from the vessel, wherein the buoy is anchored to the sea bed and is connected to a transfer line for medium. According to one variant of the method, a sink line is lowered from the vessel through the receiving space, an auxiliary buoy being attached to the sink line end, possible via an additional line, and the auxiliary buoy being caused to come to the water surface. A suitably marked pick-up line, which is connected to the buoy, is taken up and connected to the sink line, whereafter the vessel by a positioning means is moved into position above the submerged buoy and said lines are pulled up through the receiving space, so that the buoy is hoisted up and moved to a locking position therein, whereafter the buoy is locked in place in the receiving space. The vessel is provided with a hoisting means to hoist up said lines and the buoy, and also with a service shaft connecting the receiving space to the deck of the vessel. 9 figs.

Guidelines and Metrics for Assessing Space System Cost Estimates

Science.gov (United States)

2008-01-01

dump momentum from mechanical reaction control systems, and de-orbit at the end of the mission. Various approaches are used to accelerate the...launch vehicle and cargo power system-the necessary generation, storage, and distribution of electrical power and signals, hydraulic power, and any other...service, transport, hoist , repair, overhaul, assemble, disassemble, test, inspect, or otherwise maintain mission equipment any production of

Remote mobile communication in safety support system

International Nuclear Information System (INIS)

Inagaki, Kanji; Kobayashi, Hiroyuki; Hatanaka, Takahiro; Sakuma, Akira; Fukumoto, Akira; Ikeda, Jun

1999-01-01

Safety Support System (SSS) is a computerized operator support system for nuclear power plants, which is now under development. The concept of SSS covers 1) earlier detection of failure symptom and prediction of its influence to the plant operation, 2) improved transparency and robustness of plant control systems, 3) advanced human-machine interface and communication. The authors have been working on the third concept and proposed a remote mobile communication system called Plant Communication System (PCS). PCS aims to realize convenient communication between main control room and other areas such as plant local areas and site offices, using Personal Handyphone System (PHS) and wireless LAN (Local Area Network). PCS can transmit not only data but also graphic displays and dynamic video displays between the main control room and plant local areas. MPEG4 (Moving Picture Experts Group 4) technology is utilized in video data compression and decompression. The authors have developed the special multiplexing unit that connects PHS Cell Stations (CSs) and exiting coaxial cables. Voice recognition and announcement capability is also realized in the system, which enables verbal retrieval of information in the computer systems in the main control room from local areas. (author)

A planning support system to optimize approval of private housing development projects

Science.gov (United States)

Hussnain, M. Q.; Wakil, K.; Waheed, A.; Tahir, A.

2016-06-01

Out of 182 million population of Pakistan, 38% reside in urban areas having an average growth rate of 1.6%, raising the urban housing demand significantly. Poor state response to fulfil the housing needs has resulted in a mushroom growth of private housing schemes (PHS) over the years. Consequently, only in five major cities of Punjab, there are 383 legal and 150 illegal private housing development projects against 120 public sector housing schemes. A major factor behind the cancerous growth of unapproved PHS is the prolonged and delayed approval process in concerned approval authorities requiring 13 months on average. Currently, manual and paper-based approaches are used for vetting and for granting the permission which is highly subjective and non-transparent. This study aims to design a flexible planning support system (PSS) to optimize the vetting process of PHS projects under any development authority in Pakistan by reducing time and cost required for site and documents investigations. Relying on the review of regulatory documents and interviews with professional planners and land developers, this study describes the structure of a PSS developed using open- source geo-spatial tools such as OpenGeo Suite, PHP, and PostgreSQL. It highlights the development of a Knowledge Module (based on regulatory documents) containing equations related to scheme type, size (area), location, access road, components of layout plan, planning standards and other related approval checks. Furthermore, it presents the architecture of the database module and system data requirements categorized as base datasets (built-in part of PSS) and input datasets (related to the housing project under approval). It is practically demonstrated that developing a customized PSS to optimize PHS approval process in Pakistan is achievable with geospatial technology. With the provision of such a system, the approval process for private housing schemes not only becomes quicker and user-friendly but also

Strategic Intelligence Monitor on Personal Health Systems (SIMPHS): Structure of Available Data and New Measurement Framework with Selected Indicators

OpenAIRE

CODAGNONE CRISTIANO; ABADIE Fabienne

2010-01-01

This policy brief provides findings from empirical research on market and innovation dynamics regarding Personal Health Systems (PHS) in Europe. Even the already most consolidated of all PHS segments (i.e. RMT) is found to be radically different than the initial assumptions. The research has revealed that the market is in a state far from being mature and as a result there is little standardised data available. RMT contributes only a tiny fraction of the eHealth market revenues. Pilots are st...

Application of probabilistic methods to accident analysis at waste management facilities

International Nuclear Information System (INIS)

Banz, I.

1986-01-01

Probabilistic risk assessment is a technique used to systematically analyze complex technical systems, such as nuclear waste management facilities, in order to identify and measure their public health, environmental, and economic risks. Probabilistic techniques have been utilized at the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico, to evaluate the probability of a catastrophic waste hoist accident. A probability model was developed to represent the hoisting system, and fault trees were constructed to identify potential sequences of events that could result in a hoist accident. Quantification of the fault trees using statistics compiled by the Mine Safety and Health Administration (MSHA) indicated that the annual probability of a catastrophic hoist accident at WIPP is less than one in 60 million. This result allowed classification of a catastrophic hoist accident as ''not credible'' at WIPP per DOE definition. Potential uses of probabilistic techniques at other waste management facilities are discussed

Advisibility of excavating an additional central shaft to reduce duration of mine construction. [USSR

Energy Technology Data Exchange (ETDEWEB)

Durov, E.M.

1981-09-01

This paper evaluates methods of reducing duration and cost of underground black coal mine construction. A proposed scheme of coal deposit opening by a system of three mine shafts is critically analyzed. In comparison to the conventional scheme, the proposed one has one additional mine shaft in the central mine zone. The shaft, equipped with a cage hoisting system, permits the rate of mine drivage in the center of the mine to be increased. The cage hoisting system in the additional shaft is activated before the main skip shaft has been equipped and is in operation. Duration of mine construction is reduced by 6 to 10 months. Exacavation of the additional shaft costs from 2.5 to 3.5 million rubles. A further system of mine construction is also analyzed. The main shaft in the mine center is temporarily equipped with a cage hoisting system. The cage system is used for hoisting rocks removed from mine headings and main workings constructed at the bottom of the main shaft. The main shaft is equipped with skips and hoisting tower at a later stage when construction of main roadways and structures at its bottom has been completed. The proposed system permits mine construction to be reduced by 4 to 5 months without a major increase in investment.

Rigid hoist articulated grapple system development for enhanced remote maintenance

International Nuclear Information System (INIS)

Witham, C.; White, P.; Garin, J.

1979-01-01

Remote maintenance and repair within nuclear environments have become more demanding of remote manipulation equipment in the last few years. A deficiency exists in the array of tools available for dexterous operations of loads in the 180-kg range. The development of a manipulation system with enhanced operator controls is discussed. This system is a six-degree-of-freedom manipulator with bilateral servo control. It is to be attached to a mobile support boom in order to operate throughout the nuclear cell. The manipulator is intended to work in conjunction with light duty servomanipulators, overhead crane systems, and through-the-wall mechanical master slaves

Thermodynamic and economic assessment of off-grid portable cooling systems with energy storage for emergency areas

International Nuclear Information System (INIS)

Ozcan, Hasan; Akyavuz, Umit Deniz

2017-01-01

Highlights: • Solar based refrigeration systems with energy storage are proposed. • Thermodynamic and economic assessments are applied. • Cost of the pumped-hydro storage quadruples the hydrogen storage option. • A case study is made for the city of Aleppo in Syria as an emergency region. - Abstract: This study aims to investigate performance and cost aspects of a solar powered portable cooling system to conserve first aid supplies for off-grid areas with energy storage. Due to the intermittent nature of solar energy availability, two energy storage options are considered for a stationary system. Additional to the standalone system without energy storage, hydrogen is selected to be the storage medium by considering electrolysis at day time, and use of a hydrogen fuel cell unit at night time. This system consists of solar photovoltaic cells, a Polymer Exchange Membrane (PEM) electrolysis unit (PEME), hydrogen tank, a PEM fuel cell unit (PEMFC), and a vapor compression refrigeration (VCR) system to condition a container rated with ∼11 kW cooling load. The second system utilizes pumped – hydro storage (PHS) technology using a simple pump – turbine couple by storing water at a higher reservoir during day time and utilizing it to produce hydro power at night. Existence of higher reservoir brings a significant additional cost for the PHS system, making this configuration almost four times more costly than that of the hydrogen storage option, even though the storage efficiency of the PHS system is significantly higher than the hydrogen storage.

Mine-shaft conveyance monitoring

Energy Technology Data Exchange (ETDEWEB)

Beus, M.J.; Ruff, T.M.; Iverson, S.; McCoy, W.G. [National Institute for Occupational Safety and Health, Spokane, WA (USA). Spokane Research Laboratory

2000-10-01

Monitoring conveyance position and wire rope load directly from the skip or cage top offers several significant safety and production advantages. The Spokane Research Laboratory (SRL) of the National Institute for Occupational Safety and Health (NIOSH) developed a shaft conveyance monitoring system (SCMS). This system consists of position and guide-displacement sensors, a maintenance-free battery power supply and a new sensor, which is mounted on the wire rope with a Crosby Clip, to measure hoist-rope tension. A radio data link transmits sensor output to the hoist room. A state-of-the-art automated hoisting test facility was also constructed to test the concept in a controlled laboratory setting. Field tests are now underway at the SRL hoisting research facility and in deep mine shafts in northern Idaho. 4 refs., 5 figs.

29 CFR 1926.550 - Cranes and derricks.

Science.gov (United States)

2010-07-01

... design or worksite conditions. (3) Cranes and derricks—(i) Operational criteria. (A) Hoisting of the... platform; and (D) The hoisting system shall be inspected if the load rope is slack to ensure all ropes are...

Resource Conservation and Recovery Act Part B permit application

International Nuclear Information System (INIS)

1991-01-01

The US Department of Energy is currently constructing the Waste Isolation Pilot near Carlsbad, New Mexico. The full-scale pilot plant will demonstrate the feasibility of the safe disposal of defense-related nuclear waste in a bedded salt formation at a depth of 2160 feet below the surface. WIPP will provide for the permanent storage of 25,000 cu ft of remote-handled (RH) transuranic waste and 6,000,000 cu ft of contact-handled (CH) transuranic waste. This paper covers the major mechanical/structural design considerations for the waste hoist and its hoist tower structure. The design of the hoist system and safety features incorporates state-of-the-art technology developed in the hoist and mining industry to ensure safe operation for transporting nuclear waste underground. Also included are design specifications for VOC-10 monitoring system

Resource Conservation and Recovery Act, Part B permit application [for the Waste Isolation Pilot Plant (WIPP)]. Volume 4, Revision 1.0

Energy Technology Data Exchange (ETDEWEB)

1991-12-31

The US Department of Energy is currently constructing the Waste Isolation Pilot near Carlsbad, New Mexico. The full-scale pilot plant will demonstrate the feasibility of the safe disposal of defense-related nuclear waste in a bedded salt formation at a depth of 2160 feet below the surface. WIPP will provide for the permanent storage of 25,000 cu ft of remote-handled (RH) transuranic waste and 6,000,000 cu ft of contact-handled (CH) transuranic waste. This paper covers the major mechanical/structural design considerations for the waste hoist and its hoist tower structure. The design of the hoist system and safety features incorporates state-of-the-art technology developed in the hoist and mining industry to ensure safe operation for transporting nuclear waste underground. Also included are design specifications for VOC-10 monitoring system.

United States Army Weapon Systems 2010

Science.gov (United States)

2009-09-18

equipment, tractor, van, wrecker, 8.8-ton Load Handling System (LHS), 8.8-ton LHS trailer, and 10-ton dump truck models). Three truck variants and...NJ) hydraulic pump and motor: Vickers (Jackson, MS) 131 UnIteD StAteS Army ACqUISItIon phASe InveStment Component High Mobility Engineer Excavator...MEDEVAC and hoist configuration, the UH-72A is also being fielded in a VIP, National Guard Homeland Security (HLS) and a Combined Training Center

Pumped hydroelectric storage utilization assessment: Forerunner of renewable energy integration or Trojan horse?

OpenAIRE

KOUGIAS IOANNIS; SZABO SANDOR

2017-01-01

Pumped hydroelectric storage (PHS) is the main utility-scale storage technology. Although PHS systems generally constitute a fraction of generation, they receive increasing attention due to their potential balancing role towards higher penetration of variable renewable energy sources (RES). In the European context it is widely believed that PHS are key elements of the ongoing energy transition. The present analysis examines if this assumption is valid and PHS utilization grows parallel to RES...

A daily living activity remote monitoring system for solitary elderly people.

Science.gov (United States)

Maki, Hiromichi; Ogawa, Hidekuni; Matsuoka, Shingo; Yonezawa, Yoshiharu; Caldwell, W Morton

2011-01-01

A daily living activity remote monitoring system has been developed for supporting solitary elderly people. The monitoring system consists of a tri-axis accelerometer, six low-power active filters, a low-power 8-bit microcontroller (MC), a 1GB SD memory card (SDMC) and a 2.4 GHz low transmitting power mobile phone (PHS). The tri-axis accelerometer attached to the subject's chest can simultaneously measure dynamic and static acceleration forces produced by heart sound, respiration, posture and behavior. The heart rate, respiration rate, activity, posture and behavior are detected from the dynamic and static acceleration forces. These data are stored in the SD. The MC sends the data to the server computer every hour. The server computer stores the data and makes a graphic chart from the data. When the caregiver calls from his/her mobile phone to the server computer, the server computer sends the graphical chart via the PHS. The caregiver's mobile phone displays the chart to the monitor graphically.

46th Annual Gun and Missile Systems Conference and Exhibition

Science.gov (United States)

2011-09-01

is concerned (no negative results for environment when dumping of substances is prevented) General Dynamics Ordnance and Tactical Systems...displacement capability of electro dynamic shaker, hydraulic shaker has displacement capability but not force capability  Requested waiver for...support equipment were developed. J75189 Ground Handling Adapter J75192 Hoisting Beam J75199 Gun Transfer Adapter J75196 Mount Rail J75197 Gun Mounting

Increasing RES Penetration and Security of Energy Supply by Use of Energy Storages and Heat Pumps in Croatian Energy System

DEFF Research Database (Denmark)

Krajačić, Goran; Mathiesen, Brian Vad; Duić, Neven

2010-01-01

electricity, heat and transport demands, and including renewable energy, power plants, and combined heat and power production (CHP) for district heating. Using the 2007 energy system the wind power share is increased by two energy storage options: Pumped hydro and heat pumps in combination with heat storages....... The results show that such options can enable an increased penetration of wind power. Using pumped hydro storage (PHS) may increase wind power penetration from 0.5 TWh, for existing PHS installations and up to 6 TWh for very large installations. Using large heat pumps and heat storages in combination...... with specific regulation of power system could additionally increase wind penetration for 0.37 TWh. Hence, with the current technologies installed in the Croatian energy system the installed pumped hydro-plant may facilitate more than 10% wind power in the electricity system. Large-scale integration of wind...

Retrieval system for emplaced spent unreprocessed fuel (SURF) in salt bed depository: accident event analysis and mechanical failure probabilities. Final report

International Nuclear Information System (INIS)

Bhaskaran, G.; McCleery, J.E.

1979-10-01

This report provides support in developing an accident prediction event tree diagram, with an analysis of the baseline design concept for the retrieval of emplaced spent unreprocessed fuel (SURF) contained in a degraded Canister. The report contains an evaluation check list, accident logic diagrams, accident event tables, fault trees/event trees and discussions of failure probabilities for the following subsystems as potential contributors to a failure: (a) Canister extraction, including the core and ram units; (b) Canister transfer at the hoist area; and (c) Canister hoisting. This report is the second volume of a series. It continues and expands upon the report Retrieval System for Emplaced Spent Unreprocessed Fuel (SURF) in Salt Bed Depository: Baseline Concept Criteria Specifications and Mechanical Failure Probabilities. This report draws upon the baseline conceptual specifications contained in the first report

A unified pathogenesis for kidney diseases, including genetic diseases and cancers, by the protein-homeostasis-system hypothesis.

Science.gov (United States)

Lee, Kyung-Yil

2017-06-01

Every cell of an organism is separated and protected by a cell membrane. It is proposed that harmony between intercellular communication and the health of an organism is controlled by a system, designated the protein-homeostasis-system (PHS). Kidneys consist of a variety of types of renal cells, each with its own characteristic cell-receptor interactions and producing characteristic proteins. A functional union of these renal cells can be determined by various renal function tests, and harmonious intercellular communication is essential for the healthy state of the host. Injury to a kind of renal cells can impair renal function and induce an imbalance in total body health. Every acute or chronic renal disease has unknown etiologic substances that are responsible for renal cell injury at the molecular level. The immune/repair system of the host should control the etiologic substances acting against renal cells; if this system fails, the disease progresses to end stage renal disease. Each renal disease has its characteristic pathologic lesions where immune cells and immune proteins, such as immunoglobulins and complements, are infiltrated. These immune cells and immune proteins may control the etiologic substances involved in renal pathologic lesions. Also, genetic renal diseases and cancers may originate from a protein deficiency or malfunctioning protein under the PHS. A unified pathogenesis for renal diseases, including acute glomerulonephritis, idiopathic nephrotic syndrome, immunoglobulin A nephropathy, genetic renal diseases such as Alport syndrome, and malignancies such as Wilms tumor and renal cell carcinoma, is proposed using the PHS hypothesis.

Embedded Control System for Smart Walking Assistance Device.

Science.gov (United States)

Bosnak, Matevz; Skrjanc, Igor

2017-03-01

This paper presents the design and implementation of a unique control system for a smart hoist, a therapeutic device that is used in rehabilitation of walking. The control system features a unique human-machine interface that allows the human to intuitively control the system just by moving or rotating its body. The paper contains an overview of the complete system, including the design and implementation of custom sensors, dc servo motor controllers, communication interfaces and embedded-system based central control system. The prototype of the complete system was tested by conducting a 6-runs experiment on 11 subjects and results are showing that the proposed control system interface is indeed intuitive and simple to adopt by the user.

[Health services research for the public health service (PHS) and the public health system].

Science.gov (United States)

Hollederer, A; Wildner, M

2015-03-01

There is a great need for health services research in the public health system and in the German public health service. However, the public health service is underrepresented in health services research in Germany. This has several structural, historical and disciplinary-related reasons. The public health service is characterised by a broad range of activities, high qualification requirements and changing framework conditions. The concept of health services research is similar to that of the public health service and public health system, because it includes the principles of multidisciplinarity, multiprofessionalism and daily routine orientation. This article focuses on a specified system theory based model of health services research for the public health system and public health service. The model is based on established models of the health services research and health system research, which are further developed according to specific requirements of the public health service. It provides a theoretical foundation for health services research on the macro-, meso- and microlevels in public health service and the public health system. Prospects for public health service are seen in the development from "old public health" to "new public health" as well as in the integration of health services research and health system research. There is a significant potential for development in a better linkage between university research and public health service as is the case for the "Pettenkofer School of Public Health Munich". © Georg Thieme Verlag KG Stuttgart · New York.

75 FR 15441 - Privacy Act of 1974; Report of an Altered System of Records

Science.gov (United States)

2010-03-29

... notification and records access procedures, the words ``for proof of identity'' have been added to clarify the... with Part 6, ADP Systems Security, of the Department's Information Resources Management Manual, with... Administration Manual, and with supplementary Chapter PHS. 45-13.) 4. Retention and Disposal: The contractor...

Radial Internal Material Handling System (RIMS) for Circular Habitat Volumes

Science.gov (United States)

Howe, Alan S.; Haselschwardt, Sally; Bogatko, Alex; Humphrey, Brian; Patel, Amit

2013-01-01

On planetary surfaces, pressurized human habitable volumes will require a means to carry equipment around within the volume of the habitat, regardless of the partial gravity (Earth, Moon, Mars, etc.). On the NASA Habitat Demonstration Unit (HDU), a vertical cylindrical volume, it was determined that a variety of heavy items would need to be carried back and forth from deployed locations to the General Maintenance Work Station (GMWS) when in need of repair, and other equipment may need to be carried inside for repairs, such as rover parts and other external equipment. The vertical cylindrical volume of the HDU lent itself to a circular overhead track and hoist system that allows lifting of heavy objects from anywhere in the habitat to any other point in the habitat interior. In addition, the system is able to hand-off lifted items to other material handling systems through the side hatches, such as through an airlock. The overhead system consists of two concentric circle tracks that have a movable beam between them. The beam has a hoist carriage that can move back and forth on the beam. Therefore, the entire system acts like a bridge crane curved around to meet itself in a circle. The novelty of the system is in its configuration, and how it interfaces with the volume of the HDU habitat. Similar to how a bridge crane allows coverage for an entire rectangular volume, the RIMS system covers a circular volume. The RIMS system is the first generation of what may be applied to future planetary surface vertical cylinder habitats on the Moon or on Mars.

Discontinuation of approval of modifications in notes, guaranteed under Title VI or VII of the Public Health Service Act, proposed to permit use of the notes as collateral for tax-exempt financings--PHS. Final rule.

Science.gov (United States)

1983-09-21

The Department of Health and Human Services (HHS) adds a new section to regulations for making and guaranteeing loans for construction and modernization of hospitals and medical facilities and to regulations for guaranteeing loans for the construction of teaching facilities for health professions personnel. Under these regulations HHS will not approve the modification of the terms of an existing loan guaranteed under Title VI or Title VII of the Public Health Service (PHS) Act if the modification would permit use of the guarantee (or guaranteed loan) as collateral for tax-exempt financing.

Comparison of control systems applied to the handling of radioactive reactor components

International Nuclear Information System (INIS)

Robinson, C.; Harris, E.G.; Dyer, P.C.; Williams, J.G.B.

1985-01-01

The first generation of nuclear power stations have individual reactors each incorporating complete facilities for servicing components and refuelling. In the later designs, each power station has two reactors which are connected by a central block. This central block contains one set of facilities to service both reactors, but to improve the station capability, some of these are to be replicated. The central block incorporates a hoist well which was used during construction for the accessing of complete components. On completion of this work, the physical size of the hoist well is such as to permit the incorporation of additional facilities if these are shown to be operationally and economically desirable. Since a number of years of power operation has elapsed, the advantages of back-fitting to existing fuel-handling facilities has been illustrated. Since the mechanical arrangements and operating procedures are substantially similar for both the original and new handling facilities, the paper will illustrate the control systems provided for each. The configuration of the system is arranged to have two channels of control which complies with the current standard requirements in the United Kingdom. These requirements are more stringent than when the existing facility was designed and constructed, as described in the relevant sections of the paper. The new system has been designed and is being manufactured to comply with the Central Electricity Generating Board standard for nuclear fuel route interlock and control systems. (author)

How do general practitioners, pharmacists and patients evaluate the substitution system for prescription in Denmark?

DEFF Research Database (Denmark)

Rubak, Sune; Andersen, Marie-Louise Elkjær; Mainz, Jan

2002-01-01

Aim/Objectives: Evaluation of how the substitution system has been implemented, how it was assessed by the general practitioners (GPs), pharmacists (PHs) and patients, and clarification of benefits and problems related to the system. Methods: The study was based on specific question-naires to GPs....... How do general practitioners, pharmacists and patients evaluate the substitution system for prescription in Denmark?. Available from: http://www.researchgate.net/publication/243131968_How_do_general_practitioners_pharmacists...

Ageing Management of the Kinshasa Trico II Research Reactor Components and Structures. A Case Study of the 5 Tonne Overhead Travelling Crane and the Ventilation System Inlet and Outlet

Energy Technology Data Exchange (ETDEWEB)

Kombele, D. G.; Kankunku-K, P.; Mwamba, V. L.; Kobakozete, J. I.; Kiamana, M. M.; Lukibanza, J. W.; Kalala, A. T.; Mfinda, D. M.; Bilulu, T. L.; Ilunga, S. T. [Reactor Service Technical Department, Regional Nuclear Research Centre of Kinshasa (CREN-K), Atomic Energy General Commission (CGEA), Kinshasa (Congo, The Democratic Republic of the)

2014-08-15

The cable isolation sheath of the overhead traveling crane became fragile and brittle on a length of more than two meters. This degradation of the sheath has been caused by the ageing of the cable and the effects of heat, with changeable ambient temperatures in the reactor hall combined with the Joule effect, in relation to the cyclic use of the crane. This ageing effect was discovered when a failure occurred at the end of a nearly completed routine operation of displacing slightly radioactive spent ion exchange resins into waste storage. During the return of the hoist to its rest position, a severe short circuit happened between the cable and the mass of the hoist motor support, followed by a strong detonation that produced sparks and immobilized the overall system. A visual examination of the cable showed a change of its physical properties as mentioned above. A further investigation showed that two master contacts of the hoist were also burned. The bridge crane was inspected and certified in January 2010 by a competent authority eleven months before the event. On the other hand, the reactor ventilation system started presenting its limits in the late 1990s after more than 17 years of operation. Many failures occurred in the extraction motors and the air conditioning system, causing both a temperature increase and a lack of negative pressure in the reactor hall. The crane problem was solved after replacing the damaged cable and the two burned contacts. A review of the overall status of the bridge crane by the licensing authority is scheduled before the end of 2011. The paper also describes steps related to the renewal of the air inlet system and the restoration of negative pressure in the reactor hall. (author)

Pneumatic automation systems in coal mines

Energy Technology Data Exchange (ETDEWEB)

Shmatkov, N.A.; Kiklevich, Yu.N.

1981-04-01

Giprougleavtomatizatsiya, Avtomatgormash, Dongiprouglemash, VNIIGD and other plants develop 30 new pneumatic systems for mine machines and equipment control each year. The plants produce about 200 types of pneumatic systems. Major pneumatic systems for face systems, machines and equipment are reviewed: Sirena system for remote control of ANShch and AShchM face systems for steep coal seams, UPS control systems for pump stations, PAUZA control system for stowing machines, remote control system of B100-200 drilling machines, PUSK control system for coal cutter loaders with pneumatic drive (A-70, Temp), PUVSh control system for ventilation barriers activated from moving electric locomotives, PAZ control system for skip hoist loading. Specifications of the systems are given. Economic benefit produced by the pneumatic control systems are evaluated (from 1,500 to 40,000 rubles/year). Using the systems increases productivity of face machines and other machines used in black coal mines by 5 to 30%.

[Reduction of pressure sores during prone positioning of ventilated intensive care patients by the prone-head support system: a pilot study].

Science.gov (United States)

Prebio, Michael; Katz-Papatheophilou, Elfriede; Heindl, Werner; Gelbmann, Herbert; Burghuber, Otto C

2005-02-01

Prone positioning in patients with adult respiratory distress syndrome is a well-known method to improve oxygenation. The aim of our study was to evaluate a new device for prone positioning, the prone-head support system (PHS system), with regard to reduction of cutaneous pressure sores. In a pilot study we randomized 8 patients with ARDS in two groups: 180 degrees standard prone positioning (group without mask) and prone positioning with the PHS system (group with mask). The PHS system consists of a facemask support, which is connected to an adapted air suspension bed. The patients of both groups were intermittently proned for several days. We evaluated the pressure sores on head and neck before turning the patients prone for the first time and after each period of prone positioning. We documented the quantity, the size, the type and the localization of the pressure sores. There was no significant difference in the mean duration of prone positioning (27.1+/-14.7 hours in the group with mask versus 24.5+/-18.7 h in the group without mask). In the group with mask there were 1.5+/-0.8 new pressure sores by each proning, whereas in the group without mask there were 2.37+/-1.6 new pressure sores, which was lower, but not significantly. The overall area of pressure sores (798 mm2 versus 3184 mm2, p=0.004), the area of pressure sores per patient (199.5+/-104.7 mm2 versus 796+/-478 mm2, p=0.03) and the increase of the area of pressure sores per proning (79.8+/-52.0 mm2 versus 398.0+/-214.3 mm2, p=0.004) were significantly lower in the group with mask in comparison to the group without mask. The lips were the most effected localization in both groups. The pressure sores in the group with mask were less severe and showed a homogenous distribution in comparison to the group without mask. Blisters dominated in the group with mask in comparison to erosions, necrosis and ulcers in the group without mask. The PHS system with its face mask is able to reduce the extent and the

The wireless diagnostic system for motor operated valves

International Nuclear Information System (INIS)

Ito, Haruo; Akiyama, Michiaki; Suzuki, Syunichi

2010-01-01

To aim at maintenance optimization, a motor operated valve (MOV) diagnostic system called 'MOVDAS' has been developed by using new sensor technologies incorporating torque sensor into the MOV. It has been introduced into nuclear power plants operated by Japan Atomic Power Company (JAPC) for the support of Condition Based Maintenance (CBM). This system, directly checking the torque behavior of the MOV, accurately diagnoses the condition of the MOV during plant operation. Further for the ease of data collection and manpower saving, the wireless diagnostic system based on MOVDAS utilizing Personal Handyphone System (PHS) has been recently introduced into nuclear power plants in JAPC. (author)

Pendulation control system and method for rotary boom cranes

Science.gov (United States)

Robinett, III, Rush D.; Groom, Kenneth N.; Feddema, John T.; Parker, Gordon G.

2002-01-01

A command shaping control system and method for rotary boom cranes provides a way to reduce payload pendulation caused by real-time input signals, from either operator command or automated crane maneuvers. The method can take input commands and can apply a command shaping filter to reduce contributors to payload pendulation due to rotation, elevation, and hoisting movements in order to control crane response and reduce tangential and radial payload pendulation. A filter can be applied to a pendulation excitation frequency to reduce residual radial pendulation and tangential pendulation amplitudes.

Designing optimum diameter of skip shafts in mines with inclined or steep coal seams

Energy Technology Data Exchange (ETDEWEB)

Durov, E.M.

1981-07-01

This paper discusses methods of increasing depth of operating shaft mines considering optimization of hoisting systems. The following solutions are analyzed: removing mined rock material to the surface, to operating horizon, to the deepest horizon, removing rock to the deepest horizon by enlarging a large diameter borehole. It is suggested that removing rock material to the surface is most economical. This solution is sometimes difficult to implement due to design of mine shafts. If a shaft is equipped with two pairs of skips, or with a pair of skips and two independent skips, one skip or a pair of skips can be removed to form free space for buckets used to hoist mined rock and coal. The bucket moves along rope shaft guides. Analysis of the optimum hoisting systems in shaft mines for coal mines with the following design capacity is carried out: 0.9, 1.2, 1.5 and 1.8 Mmt a year. The following depth of working horizons is evaluated: 600, 800, 1000, 1200, 1400 and 1600 m. It is assumed that coal and rock are hoisted separately. Advance rate ranges from 10 to 50 m/month. The results of analysis are shown in two tables. It is suggested that from the point of view of increasing depth of active mine shafts the following solutions are optimum: 7 m shaft with a system of three independently moving skips (two for coal, one for rock material), and 8 m shaft equipped with a pair of skips and two independent skips (one of the independently moving skips is used for rock hoisting). 4 refs.

The Personal Hearing System—A Software Hearing Aid for a Personal Communication System

Directory of Open Access Journals (Sweden)

Giso Grimm

2009-01-01

Full Text Available A concept and architecture of a personal communication system (PCS is introduced that integrates audio communication and hearing support for the elderly and hearing-impaired through a personal hearing system (PHS. The concept envisions a central processor connected to audio headsets via a wireless body area network (WBAN. To demonstrate the concept, a prototype PCS is presented that is implemented on a netbook computer with a dedicated audio interface in combination with a mobile phone. The prototype can be used for field-testing possible applications and to reveal possibilities and limitations of the concept of integrating hearing support in consumer audio communication devices. It is shown that the prototype PCS can integrate hearing aid functionality, telephony, public announcement systems, and home entertainment. An exemplary binaural speech enhancement scheme that represents a large class of possible PHS processing schemes is shown to be compatible with the general concept. However, an analysis of hardware and software architectures shows that the implementation of a PCS on future advanced cell phone-like devices is challenging. Because of limitations in processing power, recoding of prototype implementations into fixed point arithmetic will be required and WBAN performance is still a limiting factor in terms of data rate and delay.

The Personal Hearing System—A Software Hearing Aid for a Personal Communication System

Science.gov (United States)

Grimm, Giso; Guilmin, Gwénaël; Poppen, Frank; Vlaming, Marcel S. M. G.; Hohmann, Volker

2009-12-01

A concept and architecture of a personal communication system (PCS) is introduced that integrates audio communication and hearing support for the elderly and hearing-impaired through a personal hearing system (PHS). The concept envisions a central processor connected to audio headsets via a wireless body area network (WBAN). To demonstrate the concept, a prototype PCS is presented that is implemented on a netbook computer with a dedicated audio interface in combination with a mobile phone. The prototype can be used for field-testing possible applications and to reveal possibilities and limitations of the concept of integrating hearing support in consumer audio communication devices. It is shown that the prototype PCS can integrate hearing aid functionality, telephony, public announcement systems, and home entertainment. An exemplary binaural speech enhancement scheme that represents a large class of possible PHS processing schemes is shown to be compatible with the general concept. However, an analysis of hardware and software architectures shows that the implementation of a PCS on future advanced cell phone-like devices is challenging. Because of limitations in processing power, recoding of prototype implementations into fixed point arithmetic will be required and WBAN performance is still a limiting factor in terms of data rate and delay.

Gravity brake

Science.gov (United States)

Lujan, Richard E.

2001-01-01

A mechanical gravity brake that prevents hoisted loads within a shaft from free-falling when a loss of hoisting force occurs. A loss of hoist lifting force may occur in a number of situations, for example if a hoist cable were to break, the brakes were to fail on a winch, or the hoist mechanism itself were to fail. Under normal hoisting conditions, the gravity brake of the invention is subject to an upward lifting force from the hoist and a downward pulling force from a suspended load. If the lifting force should suddenly cease, the loss of differential forces on the gravity brake in free-fall is translated to extend a set of brakes against the walls of the shaft to stop the free fall descent of the gravity brake and attached load.

Overhead remote handling systems for the process facility modifications project

International Nuclear Information System (INIS)

Wiesener, R.W.; Grover, D.L.

1987-01-01

Each of the cells in the process facility modifications (PFM) project complex is provided with a variety of general purpose remote handling equipment including bridge cranes, monorail hoist, bridge-mounted electromechanical manipulator (EMM) and an overhead robot used for high efficiency particulate air (HEPA) filter changeout. This equipment supplements master-slave manipulators (MSMs) located throughout the complex to provide an overall remote handling system capability. The overhead handling equipment is used for fuel and waste material handling operations throughout the process cells. The system also provides the capability for remote replacement of all in-cell process equipment which may fail or be replaced for upgrading during the lifetime of the facility

Loads Acting on the Mine Conveyance Attachments and Tail Ropes during the Emergency Braking in the Event of an Overtravel

Science.gov (United States)

Wolny, Stanisław

2016-09-01

It has now become the common practice among the design engineers that in dimensioning of structural components of conveyances, particularly the load bearing elements, they mostly use methods that do not enable the predictions of their service life, instead they rely on determining the safety factor related to the static loads exclusively. In order to solve the problem, i.e. to derive and verify the key relationships needed to determine the fatigue endurance of structural elements of conveyances expressed in the function of time and taking into account the type of hoisting gear, it is required that the values of all loads acting upon the conveyance should be determined, including those experienced under the emergency conditions, for instance during the braking phase in the event of overtravel. This study relies on the results of dynamic analysis of a hoisting installation during the braking phase when the conveyance approaches the topmost or lowermost levels. For the assumed model of the system, the equations of motion are derived for the hoisting and tail rope elements and for the elastic strings. The section of the hoisting rope between the full conveyance approaching the top station and the Keope pulley is substituted by a spring with the constant elasticity coefficient, equal to that of the rope section at the instant the conveyance begins the underwind travel. Recalling the solution to the wave equation, analytical formulas are provided expressing the displacements of any cross-profiles of hoisting and tail ropes, including the conveyance attachments and tail ropes, in the function of braking forces applied to conveyances in the overtravel path and operational parameters of the hoisting gear. Besides, approximate formulas are provided yielding: loading of the hoisting rope segment between the conveyance braking in the headgear tower and the Keope pulley deceleration of the conveyance during the braking phase. The results will be utilised to derive the function

Mechanical Rope and Cable

Science.gov (United States)

1975-04-01

well known and preventable. 2. Present testing and inspection procedures are inadequate as monitors of the production and acceptance of rope. 3...attracted serious scientific and engineering attention to the product , the system involved, or their misuse--a lack often manifested by in-service rope...state regulations. In critical app] frations involving hoisting people, such as ropes for hoisting shaft cars and aerial t’• amways , federal and state

Precipitation characteristics of uranyl ions at different pHs depending on the presence of carbonate ions and hydrogen peroxide.

Science.gov (United States)

Kim, Kwang-Wook; Kim, Yeon-Hwa; Lee, Se-yoon; Lee, Jae-Won; Joe, Kih-Soo; Lee, Eil-Hee; Kim, Jong-Seung; Song, Kyuseok; Song, Kee-Chan

2009-04-01

This work studied the dissolution of uranium dioxide and precipitation characteristics of uranyl ions in alkaline and acidic solutions depending on the presence of carbonate ions and H2O2 in the solutions at different pHs controlled by adding HNO3 or NaOH in the solution. The chemical structures of the precipitates generated in different conditions were evaluated and compared by using XRD, SEM, TG-DT, and IR analyses together. The sizes and forms of the precipitates in the solutions were evaluated, as well. The uranyl ions were precipitated in the various forms, depending on the solution pH and the presences of hydrogen peroxide and carbonate ions in the solution. In a 0.5 M Na2CO3 solution with H2O2, where the uranyl ions formed mixed uranyl peroxy-carbonato complexes, the uranyl ions were precipitated as a uranium peroxide of UO4(H20)4 at pH 3-4, and precipitated as a clarkeite of Na2U2Ox(OH)y(H2O)z above pH 13. In the same carbonate solution without H2O2, where the uranyl ions formed uranyl tris-carbonato complex, the uranyl ions were observed to be precipitated as a different form of clarkeite above pH 13. The precipitate of uranyl ions in a nitrate solution without carbonate ions and H2O2 at a high pH were studied together to compare the precipitate forms in the carbonate solutions.

Application of a generic superstructure-based formulation to the design of wind-pumped-storage hybrid systems on remote islands

International Nuclear Information System (INIS)

Chen, Cheng-Liang; Chen, Hui-Chu; Lee, Jui-Yuan

2016-01-01

Highlights: • A rigorous model for hybrid power system (HPS) design to support a remote island. • Use pumped hydro storage to store tentative surplus electricity. • Formulate the HPS design problem as a mixed-integer linear program (MILP). - Abstract: This paper aims to present a mathematical model for the design of a hybrid power system (HPS) to support a remote island with 100 thousand citizens. The goal is to reduce diesel fuel consumption by adequate expansion of wind power supply. Pumped hydroelectric storage (PHS) is used in the HPS to buffer the impact of intermittent behavior of wind energy. A superstructure is proposed for HPS design, considering all possible capital decisions (e.g. the number of wind turbines) and hourly-basis operational variables (such as the amount of surplus electricity in storage and its discharge). The HPS design problem can then be formulated as a mixed-integer linear program (MILP) based on the proposed superstructure. For a given total share of wind power, the optimal mix of diesel-based and wind power supplies as well as the required capacity of PHS are determined using a four-step optimization approach, involving minimizing (i) the consumption of diesel fuel, (ii) the number of wind turbines, (iii) the size of the upper water reservoir, and (iv) the charge/discharge rates of the PHS system. In this sequential optimization, the objective value obtained in a previous step is added as an additional constraint to the next step. The proposed HPS design model is applied to a real case study of the remote K Island on the other side of Taiwan Strait using hourly-basis, year-round historical data. Inclusion of other renewable energy sources, such as photovoltaic cells and biomass-fired power plants, as well as economic perspectives will be considered in future work.

Informal Trade of Psychoactive Herbal Products in the City of Diadema, SP, Brazil: Quality and Potential Risks

Directory of Open Access Journals (Sweden)

Julino Assunção Rodrigues Soares Neto

2013-01-01

Full Text Available The present study aimed to assess the quality and risks involved in the consumption of psychoactive herbal products (PHs that are available through informal commerce in the city of Diadema, SP, Brazil. Methods of ethnography were used to conduct the fieldwork during which four dealers were selected to record the collection, handling, packaging, types of PHs marketed, and their therapeutic purposes. In addition, lots of the PHs selected were purchased from the dealers and analyzed using microbiology and pharmacognosy techniques. 217 PHs were recorded and categorized into two main groups: stimulants (67% and depressants (27% of the central nervous system; sixteen of them were selected, and their 52 lots were acquired. The deficiencies observed in handling and packaging these lots by dealers were confirmed by microbiological analysis; 80.8% of them presented risk according to the indicators defined by the Brazilian Pharmacopoeia. The pharmacognostic analysis confirmed the authenticity of only 9 to 16 PHs analyzed. In addition, descriptions of contraindications, adverse reactions, and drug interactions were found in the literature for the PHs. The results of this study allow the observation of the priorities for the sanitary adequacy of the popular trade of herbs.

Design and Construction of Operation Bridge for Research Reactor

International Nuclear Information System (INIS)

Jung, Kwangsub; Choi, Jinbok; Lee, Jongmin; Oh, Jinho

2015-01-01

The operation bridge contains a lower working deck mounted on a saddle that travels on rails. Upright members are mounted on the saddle to support the upper structure and two hoist monorails. The saddle contains an anti-derail system that is composed of seismic lugs and guide rollers. The operation bridge travels along the rails to transport the fuel assembly, irradiated object, and reactor components in the pools by using tools. Hoists are installed at the top girder. The hoist is suspended from the monorail by means of a motor driven trolley that runs along the monorail. Movements of hoist and trolley are controlled by using the control pendant switch. Processes of design and construction of the operation bridge for the research reactor are introduced. The operation bridge is designed under consideration of functions of handling equipment in the pool and operational limits for safety. Structural analysis is carried out to evaluate the structural integrity in the seismic events. Tests and inspections are also performed during fabrication and installation to confirm the function and safety of the operation bridge

Prevention of Preharvest Sprouting through Hormone Engineering and Germination Recovery by Chemical Biology.

Science.gov (United States)

Nonogaki, Mariko; Nonogaki, Hiroyuki

2017-01-01

Vivipary, germination of seeds on the maternal plant, is observed in nature and provides ecological advantages in certain wild species, such as mangroves. However, precocious seed germination in agricultural species, such as preharvest sprouting (PHS) in cereals, is a serious issue for food security. PHS reduces grain quality and causes economical losses to farmers. PHS can be prevented by translating the basic knowledge of hormone biology in seeds into technologies. Biosynthesis of abscisic acid (ABA), which is an essential hormone for seed dormancy, can be engineered to enhance dormancy and prevent PHS. Enhancing nine- cis -epoxycarotenoid dioxygenase (NCED), a rate-limiting enzyme of ABA biosynthesis, through a chemically induced gene expression system, has successfully been used to suppress germination of Arabidopsis seeds. The more advanced system NCED positive-feedback system, which amplifies ABA biosynthesis in a seed-specific manner without chemical induction, has also been developed. The proofs of concept established in the model species are now ready to be applied to crops. A potential problem is recovery of germination from hyperdormant crop grains. Hyperdormancy induced by the NCED systems can be reversed by inducing counteracting genes, such as NCED RNA interference or gibberellin (GA) biosynthesis genes. Alternatively, seed sensitivity to ABA can be modified to rescue germination using the knowledge of chemical biology. ABA antagonists, which were developed recently, have great potential to recover germination from the hyperdormant seeds. Combination of the dormancy-imposing and -releasing approaches will establish a comprehensive technology for PHS prevention and germination recovery.

Chitosan and its derivatives for application in mucoadhesive drug delivery systems

OpenAIRE

Ways, Twana Mohammed M.; Lau, Wing Man; Khutoryanskiy, Vitaliy V.

2018-01-01

Mucoadhesive drug delivery systems are desirable as they can increase the residence time of drugs at the site of absorption/action, provide sustained drug release and minimize the degradation of drugs in various body sites. Chitosan is a cationic polysaccharide that exhibits mucoadhesive properties and it has been widely used in the design of mucoadhesive dosage forms. However, its limited mucoadhesive strength and limited water-solubility at neutral and basic pHs are considered as two major ...

Chitosan and Its Derivatives for Application in Mucoadhesive Drug Delivery Systems

OpenAIRE

Twana Mohammed M. Ways; Wing Man Lau; Vitaliy V. Khutoryanskiy

2018-01-01

Mucoadhesive drug delivery systems are desirable as they can increase the residence time of drugs at the site of absorption/action, provide sustained drug release and minimize the degradation of drugs in various body sites. Chitosan is a cationic polysaccharide that exhibits mucoadhesive properties and it has been widely used in the design of mucoadhesive dosage forms. However, its limited mucoadhesive strength and limited water-solubility at neutral and basic pHs are considered as two major ...

A new venous infusion path monitoring system utilizing electrostatic induced potential.

Science.gov (United States)

Ogawa, Hidekuni; Yonezawa, Yoshiharu; Maki, Hiromichi; Caldwell, W Morton

2008-01-01

A new venous infusion pathway monitoring system has been developed for hospital and home use. The system consists of linear and digital integrated circuits and a low-power 8-bit single chip microcomputer which constantly monitors the infusion pathway intactness. A 330 kHz AC voltage, which is induced on the patient's body by electrostatic coupling from a 330 kHz pulse oscillator, can be recorded by main and reference electrodes wrapped around the infusion polyvinyl chloride tube. If the injection needle or infusion tube becomes detached, then the system detects changes in the induced AC voltages and alerts the nursing station, via the nurse call system or PHS (personal handy phone system).

A new infusion pathway monitoring system utilizing electrostatic induced potential.

Science.gov (United States)

Maki, Hiromichi; Yonezawa, Yoshiharu; Ogawa, Hidekuni; Ninomiya, Ishio; Sada, Kouji; Hamada, Shingo; Hahn, Alien W; Caldwell, W Morton

2006-01-01

We have developed a new infusion pathway monitoring system employing linear integrated circuits and a low-power 8-bit single chip microcomputer. The system is available for hospital and home use and it constantly monitors the intactness of the pathway. The sensor is an electro-conductive polymer electrode wrapped around the infusion polyvinyl chloride infusion tube. This records an AC (alternating current) voltage induced on the patient's body by electrostatic coupling from the normal 100 volt, 60 Hz AC power line wiring field in the patient's room. If the injection needle or infusion tube becomes detached, then the system detects changes in the induced AC voltage and alerts the nursing station, via the nurse call system or PHS (personal handy phone System).

Sizing of a wind-hydro system using a reversible hydraulic facility with seawater. A case study in the Canary Islands

International Nuclear Information System (INIS)

Portero, Ulises; Velázquez, Sergio; Carta, José A.

2015-01-01

Highlights: • A model of a wind-hydro system is developed associated to a specific demand. • A particular case on islands with a weak electrical system is simulated. • A reversible seawater-based pumped-hydro system associated to a wind farm is sized. • The economic benefit of the resulting wind-hydro system is calculated. - Abstract: While the climatic conditions of the Canary Islands (Spain) are highly favourable for wind and solar energy exploitation, the low freshwater reserves are a problem when considering the implementation of hydro-based systems. For this reason, the pumped hydro storage (PHS) systems that have been proposed on the islands and which aim to exploit the available freshwater include an additional seawater desalination process. Given this drawback, this paper proposes an original alternative: a reversible PHS facility which directly uses seawater with the system in this case located on the coast of Gran Canaria island. This facility would be used to manage and better integrate the energy generated by a wind farm into a weak insular electrical system. An analysis is also undertaken of the economic benefits the proposed wind-hydro system would entail for the island’s electrical system. As a result of the incorporation of the hydraulic unit, the contribution of the wind-hydro system in satisfying electricity demand is 29% higher than if a wind-only system is used. The electrical energy generation cost of the wind-hydro system amounts to 95.34 €/MW h, entailing an annual saving for the electrical system of 7.68 M€/year.

A new infusion pathway intactness monitoring system.

Science.gov (United States)

Ogawa, Hidekuni; Yonezawa, Yoshiharu; Maki, Hiromichi; Ninomiya, Ishio; Sata, Koji; Hamada, Shingo; Caldwell, W Morton

2006-01-01

A new infusion pathway monitoring system has been developed for hospital and home use. The system consists of linear integrated circuits and a low-power 8-bit single chip microcomputer which constantly monitors the infusion pathway intactness. An AC (alternating current) voltage is induced on the patient's body by electrostatic coupling from the normal 100 volt, 60 Hz AC power line wiring field in the patient's room. The induced AC voltage can be recorded by a main electrode wrapped around the infusion polyvinyl chloride tube. A reference electrode is wrapped on the electrode to monitor the AC voltage around the main electrode. If the injection needle or infusion tube becomes detached, then the system detects changes in the induced AC voltages and alerts the nursing station, via the nurse call system or PHS (personal handy phone system).

Assessment of four different cathode materials at different initial pHs using unbuffered catholytes in microbial electrolysis cells

KAUST Repository

Ribot-Llobet, Edgar; Nam, Joo-Youn; Tokash, Justin C.; Guisasola, Albert; Logan, Bruce E.

2013-01-01

Nickel foam (NF), stainless steel wool (SSW), platinum coated stainless steel mesh (Pt), and molybdenum disulfide coated stainless steel mesh (MoS 2) electrodes have been proposed as catalysts for hydrogen gas production, but previous tests have primarily examined their performance in well buffered solutions. These materials were compared using two-chamber microbial electrolysis cells (MECs), and linear sweep voltammetry (LSV) in unbuffered saline solutions at two different initial pHs (7 and 12). There was generally no appreciable effect of initial pH on production rates or total gas production. NF produced hydrogen gas at a rate of 1.1 m3 H2/m 3·d, which was only slightly less than that using Pt (1.4 m3 H2/m3·d), but larger than that obtained with SSW (0.52 m3 H2/m3·d) or MoS2 (0.67 m3 H2/m3·d). Overall hydrogen gas recoveries with SSW (29.7 ± 0.5 mL), MoS2 (28.6 ± 1.3 mL) and NF (32.4 ± 2 mL) were only slightly less than that of Pt (37.9 ± 0.5 mL). Total energy recoveries, based on the gas produced versus electrical energy input, ranged from 0.75 ± 0.02 for Pt, to 0.55 ± 0.02 for SSW. An LSV analysis showed no effect of pH for NF and Pt, but overpotentials were reduced for MoS2 and SSW by using an initial lower pH. At cathode potentials more negative than -0.85 V (vs Ag/AgCl), NF had lower overpotentials than the MoS2. These results provide the first assessment of these materials under practical conditions of high pH in unbuffered saline catholytes, and position NF as the most promising inexpensive alternative to Pt.

Assessment of four different cathode materials at different initial pHs using unbuffered catholytes in microbial electrolysis cells

KAUST Repository

Ribot-Llobet, Edgar

2013-03-01

Nickel foam (NF), stainless steel wool (SSW), platinum coated stainless steel mesh (Pt), and molybdenum disulfide coated stainless steel mesh (MoS 2) electrodes have been proposed as catalysts for hydrogen gas production, but previous tests have primarily examined their performance in well buffered solutions. These materials were compared using two-chamber microbial electrolysis cells (MECs), and linear sweep voltammetry (LSV) in unbuffered saline solutions at two different initial pHs (7 and 12). There was generally no appreciable effect of initial pH on production rates or total gas production. NF produced hydrogen gas at a rate of 1.1 m3 H2/m 3·d, which was only slightly less than that using Pt (1.4 m3 H2/m3·d), but larger than that obtained with SSW (0.52 m3 H2/m3·d) or MoS2 (0.67 m3 H2/m3·d). Overall hydrogen gas recoveries with SSW (29.7 ± 0.5 mL), MoS2 (28.6 ± 1.3 mL) and NF (32.4 ± 2 mL) were only slightly less than that of Pt (37.9 ± 0.5 mL). Total energy recoveries, based on the gas produced versus electrical energy input, ranged from 0.75 ± 0.02 for Pt, to 0.55 ± 0.02 for SSW. An LSV analysis showed no effect of pH for NF and Pt, but overpotentials were reduced for MoS2 and SSW by using an initial lower pH. At cathode potentials more negative than -0.85 V (vs Ag/AgCl), NF had lower overpotentials than the MoS2. These results provide the first assessment of these materials under practical conditions of high pH in unbuffered saline catholytes, and position NF as the most promising inexpensive alternative to Pt.

Engineering assessment of 105 K basin monorails

International Nuclear Information System (INIS)

Frier, W.A.

1995-01-01

The engineering assessment of the 105 K Basins monorails was performed to provide the engineering analysis to justify the existing basin north-south monorail capacity. The existing monorails have a capacity of 2400 lbs posted on the north-south monorails. The engineering assessment concluded that the monorail, hanger system, and trolleys all rate for a 2000 lb capacity. Based upon a 2,500 lb trolley load, the monorails, the hanger system, and the double trolley hoist system will rate for 2,500 lbs. The single trolley hoist system for handling the fuel canisters and the trolley systems used in the various transfer areas are limited by manufacturers to 2,000 lbs. Therefore, it is concluded from this engineering assessment that the 2,400 lb capacity posting for the north-south basin monorails is appropriate

System and Method for Automated Rendezvous, Docking and Capture of Autonomous Underwater Vehicles

Science.gov (United States)

Stone, William C. (Inventor); Clark, Evan (Inventor); Richmond, Kristof (Inventor); Paulus, Jeremy (Inventor); Kapit, Jason (Inventor); Scully, Mark (Inventor); Kimball, Peter (Inventor)

2018-01-01

A system for automated rendezvous, docking, and capture of autonomous underwater vehicles at the conclusion of a mission comprising of comprised of a docking rod having lighted, pulsating (in both frequency and light intensity) series of LED light strips thereon, with the LEDs at a known spacing, and the autonomous underwater vehicle specially designed to detect and capture the docking rod and then be lifted structurally by a spherical end strop about which the vehicle can be pivoted and hoisted up (e.g., onto a ship). The method of recovery allows for very routine and reliable automated recovery of an unmanned underwater asset.

A mobile network-based multimedia teleconference system for homecare services.

Science.gov (United States)

Zhang, Zhaomin; He, Aiguo; Wei, Daming

2008-03-01

Because most research and development for homecare services have focused on providing connections between home and service centers, the goal of the present work is to develop techniques and create realtime communications to connect service centers and homecare workers in mobile environments. A key technical issue for this research is how to overcome the limitation of bandwidth in mobile media and networks. An effort has been made to balance performance of communication and basic demands in telehealth through optimized system design and technical implementation. Implementations using third generation (3G) Freedom Of Mobile multimedia Access (FOMA) and Personal Handyphone System (PHS) were developed and evaluated. We conclude that the system we developed based on 3G FOMA provides sufficient and satisfactory functions for use in homecare services.

Mountainous Region Wind Power Project Features and Turbine Hoisting Technology%山区风电工程特点与风机吊装技术

Institute of Scientific and Technical Information of China (English)

张栋

2014-01-01

In recent years,domestic mountainous region wind power location is allocated in higher and higher altitude, thereby leading to more and more difficult turbine installation.How to safely and efficiently complete turbine installation is an important issue faced by all wind power construction enterprises.Hebei Bashang Luotuogou Stage II wind power field is adopted as an example in the paper.Mountainous region wind power project features and turbine hoisting technologies are summarized and analyzed,thereby providing some guidance experience for installing more mountainous region turbines.%近年来国内山区风电场所处海拔越来越高，风机安装难度越来越大，如何保证在紧张的工期内安全高效地完成风机安装，是每个风电施工企业面临的重要课题。本文以河北坝上骆驼沟二期风电场为例，对山区风电工程特点和风机吊装技术进行总结分析，以期对更多山区风机安装作一些指导。

78 FR 52777 - Implementation of the Revised International Guiding Principles for Biomedical Research Involving...

Science.gov (United States)

2013-08-26

... for Medical Science (CIOMS) and the International Council for Laboratory Animal Science (ICLAS). PHS.../references/hrea1985.htm ) and the PHS Policy on Humane Care and Use of Laboratory Animals (PHS Policy; http://grants.nih.gov/grants/olaw/references/phspol.htm ). The PHS Policy requires that institutions have an...

Single step, pH induced gold nanoparticle chain formation in lecithin/water system.

Science.gov (United States)

Sharma, Damyanti

2013-07-01

Gold nanoparticle (AuNP) chains have been formed by a single step method in a lecithin/water system where lecithin itself plays the role of a reductant and a template for AuNP chain formation. Two preparative strategies were explored: (1) evaporating lecithin solution with aqueous gold chloride (HAuCl4) at different pHs and (2) dispersing lecithin vesicles in aqueous HAuCl4 solutions of various pHs in the range of 2.5-11.3. In method 1, at initial pH 2.5, 20-50 nm AuNPs are found attached to lecithin vesicles. When pH is raised to 5.5 there are no vesicles present and 20 nm monodisperse particles are found aggregating. Chain formation of fine nanoparticles (3-5 nm) is observed from neutral to basic pH, between 6.5-10.3 The chains formed are hundreds of nanometers to micrometer long and are usually 2-3 nanoparticles wide. On further increasing pH to 11.3, particles form disk-like or raft-like structures. When method (ii) was used a little chain formation was observed. Most of the nanoparticles formed were found either sitting together as raft like structures or scattered on lecithin structures. Copyright © 2013 Elsevier B.V. All rights reserved.

Progress and monitoring system on compression and transmission technologies of dynamic image

International Nuclear Information System (INIS)

Kobayashi, Hiroyuki; Saijo, Nobuyuki; Nakajo, Ken

2001-01-01

The Toshiba Corporation developed a real-time dynamic image transmission matched with quality of transmission circuit by using MPEG-4 which was recent international standard system for the dynamic image coding system. Concretely, this system made possible on real-time dynamic image transmission even at transmission on wireless circuit such as portable telephone, PHS, wireless LAN, and so on, at viewpoint of the mobile communication. And, by using the wireless circuit, it could be built without any limit of transmission cable, to realize its layout-free establishment. In addition, this system uses only image for communication without using voice, and some devices were carried out to upgrade image and frame speed as possible. Here were described on outlines of transmission system and principle of detection MPEG-4, and function and application of monitoring system using this system. (G.K.)

Direct ultimate disposal of spent fuel elements. Mechanical equipment tests

International Nuclear Information System (INIS)

Filbert, W.; Schrimpf, C.

1990-02-01

Simulation of the shaft transport of waste forms is described. Proceeding from a concept of a shaft hoist with a payload of 85 t, the applicability of the state of the art of essential components, such as hoisting machine, cage and hoisting cables, to such payloads is described. For these components a test stand has been planned which meets safety-related regulations. (DG) [de

K Basins floor sludge retrieval system knockout pot basket fuel burn accident

International Nuclear Information System (INIS)

HUNT, J.W.

1998-01-01

The K Basins Sludge Retrieval System Preliminary Hazard Analysis Report (HNF-2676) identified and categorized a series of potential accidents associated with K Basins Sludge Retrieval System design and operation. The fuel burn accident was of concern with respect to the potential release of contamination resulting from a runaway chemical reaction of the uranium fuel in a knockout pot basket suspended in the air. The unmitigated radiological dose to an offsite receptor from this fuel burn accident is calculated to be much less than the offsite risk evaluation guidelines for anticipated events. However, because of potential radiation exposure to the facility worker, this accident is precluded with a safety significant lifting device that will prevent the monorail hoist from lifting the knockout pot basket out of the K Basin water pool

Further Research on an Anti-Swing Control System for Overhead Cranes

Directory of Open Access Journals (Sweden)

B. Spruogis

2018-02-01

Full Text Available A method of reducing load oscillations that occur when overhead crane reaches destination position is presented in the article. The use of control drive scheme of crane bridge and trolley that ensures a smooth phase trajectory transition of the load to the optimum trajectory in accordance with Pontryagin's maximum principle is proposed. Mentioned control system changes the magnitude or direction of the traction force at the moment when the load is located above the destination. It is found that the degree of change of the traction force depends on the hoisting rope deviation angle from vertical. This study was conducted in order to provide more accurate and fast handling of loads by overhead crane.

Potential Coastal Pumped Hydroelectric Energy Storage Locations Identified using GIS-based Topographic Analysis

Science.gov (United States)

Parsons, R.; Barnhart, C. J.; Benson, S. M.

2013-12-01

Large-scale electrical energy storage could accommodate variable, weather dependent energy resources such as wind and solar. Pumped hydroelectric energy storage (PHS) and compressed energy storage area (CAES) have life cycle energy and financial costs that are an order of magnitude lower than conventional electrochemical storage technologies. However PHS and CAES storage technologies require specific geologic conditions. Conventional PHS requires an upper and lower reservoir separated by at least 100 m of head, but no more than 10 km in horizontal distance. Conventional PHS also impacts fresh water supplies, riparian ecosystems, and hydrologic environments. A PHS facility that uses the ocean as the lower reservoir benefits from a smaller footprint, minimal freshwater impact, and the potential to be located near off shore wind resources and population centers. Although technologically nascent, today one coastal PHS facility exists. The storage potential for coastal PHS is unknown. Can coastal PHS play a significant role in augmenting future power grids with a high faction of renewable energy supply? In this study we employ GIS-based topographic analysis to quantify the coastal PHS potential of several geographic locations, including California, Chile and Peru. We developed automated techniques that seek local topographic minima in 90 m spatial resolution shuttle radar topography mission (SRTM) digital elevation models (DEM) that satisfy the following criteria conducive to PHS: within 10 km from the sea; minimum elevation 150 m; maximum elevation 1000 m. Preliminary results suggest the global potential for coastal PHS could be very significant. For example, in northern Chile we have identified over 60 locations that satisfy the above criteria. Two of these locations could store over 10 million cubic meters of water or several GWh of energy. We plan to report a global database of candidate coastal PHS locations and to estimate their energy storage capacity.

Bula Hemoragik dengan Komplikasi Perforasi Gaster Sebagai Manifestasi Klinis Purpura Henoch-Schonlein yang Tidak Biasa pada Anak

Directory of Open Access Journals (Sweden)

Budi Setiabudiawan

2016-11-01

Full Text Available Purpura Henoch-Schonlein (PHS merupakan vaskulitis pada pembuluh darah kecil tersering terjadi pada anak. Penyakit ini ditandai dengan purpura palpablenontrombositopenia disertai salah satu gejala nyeri perut, artritis atau atralgia, glomerulonefritis, dan hasil biopsi jaringan berupa gambaran vaskulitis leukositoklastik. Bula hemoragik disertai edema jaringan subkutan merupakan gambaran yang tidak umum pada PHS dan sering terlewatkan. Manifestasi klinis vesikobulosa PHS sering ditemukan pada pasien dewasa, 16%–60% kasus, sedangkan pada anak kurang dari 2% kasus. Walaupun PHS secara tipikal merupakan penyakit selflimiting, tetapi komplikasi serius dapat terjadi. Perforasi gaster sangat jarang dilaporkan sebagai komplikasi PHS. Kami melaporkan 2 kasus PHS dengan manifestasi kulit yang berat, yaitu timbulnya bula hemoragik disertai dengan perforasi gaster. Pada kedua kasus dilakukan tindakan operatif dengan keluaran yang berbeda, pada kasus pertama pasien dipulangkan dalam kondisi baik pascaoperasi setelah dilakukan laparatomi eksplorasi, walaupun masih menderita nefritis. Sedangkan pasien kedua meninggal setelah tindakan diagnostic peritoneal lavagedisebabkan sepsis berat. Simpulan, bula hemoragik dapat dipertimbangkan sebagai prediktor komplikasi perforasi gaster pada PHS yang akan meningkatkan kewaspadaan dalam tata laksana PHS

Nuclear reactor vessel decontamination systems

International Nuclear Information System (INIS)

McGuire, P. J.

1985-01-01

There is disclosed in the present application, a decontamination system for reactor vessels. The system is operatable without entry by personnel into the contaminated vessel before the decontamination operation is carried out and comprises an assembly which is introduced into the vertical cylindrical vessel of the typical boiling water reactor through the open top. The assembly includes a circular track which is centered by guideways permanently installed in the reactor vessel and the track guides opposed pairs of nozzles through which water under very high pressure is directed at the wall for progressively cutting and sweeping a tenacious radioactive coating as the nozzles are driven around the track in close proximity to the vessel wall. The whole assembly is hoisted to a level above the top of the vessel by a crane, outboard slides on the assembly brought into engagement with the permanent guideways and the assembly progressively lowered in the vessel as the decontamination operation progresses. The assembly also includes a low pressure nozzle which forms a spray umbrella above the high pressure nozzles to contain radioactive particles dislodged during the decontamination

Follow-up study on management of chronic obstructive pulmonary disease in Hunan Province, the People's Republic of China

Directory of Open Access Journals (Sweden)

Zeng YQ

2016-05-01

Full Text Available Yuqin Zeng,1,* Jianxian Xu,1,* Shan Cai,1 Fen Jiang,1 Anmei Hu,2 Huayun Liu,3 Chengli Bei,4 Ping Chen11Department of Respiratory Medicine, The Second Xiangya Hospital, Central South University, Changsha, Hunan, 2Department of Respiratory Medicine, Shenzhen City Baoan District Central Hospital, Shenzhen, Guangdong, 3Department of Respiratory Medicine, The Yueyang First People’s Hospital, Yueyang, Hunan, 4Department of Respiratory Medicine, Changsha Central Hospital, Changsha, People’s Republic of China*These authors contributed equally to this workBackground: In 2009, our study showed an extreme imbalance and disparity in COPD-related health resources allocation at three levels of public hospitals (PHs in Hunan Province of the People’s Republic of China, especially in second-level PHs. Moreover, most Chinese citizens accept their health care services in first- and second-level PHs for economic and geographical reasons, as well as because of the incomplete transfer system in the health care services. To improve diagnosis and treatment ability of pulmonologists in second-level PHs, an intervention that provided training combined with spirometry equipment was carried out in three PHs from six second-level PHs. The aim of this follow-up study was to evaluate the changes associated with COPD-related health resources allocation and the effect of the intervention 4 years later.Methods: The data regarding the availability of spirometers, inhalation agents for COPD, and COPD-related health care education for local residents were collected from 57 PHs in 2009 and 48 PHs in 2013. Pulmonologists working in these PHs were asked to complete a questionnaire individually. Six second-level PHs (three in the intervention group and the other three in the control group [without training and spirometry equipment] that further took part in the survey in 2009 were reevaluated to determine the doubtful diagnostic ratio and the confirmation ratio of COPD. The

Thermal Equilibrium Dynamic Control Based on DPWM Dual-Mode Modulation of High Power NPC Three-Level Inverter

OpenAIRE

Xu, Shi-Zhou; He, Feng-You

2016-01-01

In some special applications of NPC three-level inverters, such as mine hoist, there exist special conditions of overloading during the whole hoisting process and large overload in starting stage, during which the power-loss calculation of power devices and thermal control are important factors affecting the thermal stability of inverters. The principles of SVPWM and DPWM were described in this paper firstly, based on which the dynamic power losses of the two modulations of hoist in single pe...

Sealing method and sealing device for radioactive waste containing vessel

International Nuclear Information System (INIS)

Ishiwatari, Koji; Otsuki, Akira

1998-01-01

A radioactive waste-containing body is hoisted down into a strong-material vessel opened upwardly, and a strong-material lid is hoisted down to the opening of the strong-material-vessel and welded. The strong material vessel is hoisted up and loaded on a corrosion resistant-material bottom plate placed horizontally. A corrosion resistant-material vessel having one opening end and having a corrosion resistant-material flange on the other end and previously agreed with the strong material-vessel main body is hoisted up by a hoisting device having an inserting device so that the opening of the corrosion resistant vessel is directed downwardly. The corrosion resistant vessel is press-fitted to the outside of the strong material-vessel by the inserting device while being heated by a preheater to shrink. Subsequently, the lower end of the corrosion resistant-material vessel and the corrosion resistant-material bottom plate are welded to constitute a corrosion resistant-material vessel. Then, the radioactive waste containing body can be sealed in a sealing vessel comprising the strong-material vessel and the corrosion resistant-material vessel. (N.H.)

Metabolic response to feeding in Tupinambis merianae: circadian rhythm and a possible respiratory constraint.

Science.gov (United States)

Klein, Wilfried; Perry, Steven F; Abe, Augusto S; Andrade, Denis V

2006-01-01

The diurnal tegu lizard Tupinambis merianae exhibits a marked circadian variation in metabolism that is characterized by the significant increase in metabolism during part of the day. These increases in metabolic rate, found in the fasting animal, are absent during the first 2 d after meal ingestion but reappear subsequently, and the daily increase in metabolic rate is added to the increase in metabolic rate caused by digestion. During the first 2 d after feeding, priority is given to digestion, while on the third and following days, the metabolic demands are clearly added to each other. This response seems to be a regulated response of the animal, which becomes less active after food ingestion, rather than an inability of the respiratory system to support simultaneous demands at the beginning of digestion. The body cavity of Tupinambis is divided into two compartments by a posthepatic septum (PHS). Animals that had their PHS surgically removed showed no significant alteration in the postprandial metabolic response compared to tegus with intact PHS. The maximal metabolic increment during digestion, the relative cost of meal digestion, and the duration of the process were virtually unaffected by the removal of the PHS.

Fixed position holding control for self-propulsion barges under disturbance condition; Gairanka ni okeru jiko baji no teiten hoji seigyo ni tsuite

Energy Technology Data Exchange (ETDEWEB)

Kijima, K; Murata, W; Furukawa, Y [Kyushu University, Fukuoka (Japan). Faculty of Engineering

1996-04-10

In direct hoisting work in suspension bridge construction, since a cable crane directly hoists a bridge beam block put on a barge on the sea, precise fixed position holding function is required for a barge. The control system was then designed on the basis of an ILQ control theory, and the effect of change in time constant as design parameter on fixed position holding performance was studied. In addition, the critical disturbance for fixed position holding control was studied through numerical simulation under various disturbance conditions using the above designed control system. As a result, in the design of control systems on the basis of an ILQ control theory, the precise control system could be designed by diminishing, in particular, the time constant for state variable around a z axis among time constants according to the extent of disturbance. The control performance was largely affected by response delay period from sensing of disturbance to beginning of control. 3 refs., 7 figs., 2 tabs.

Atendimento em reumatologia no município de São Paulo: análise na gestão plena do Sistema Único de Saúde (SUS - ano 2004 Rheumatology consultations in São Paulo city: analyses of the Public Health Services (PHS - year 2004

Directory of Open Access Journals (Sweden)

Deborah Colucci Cavalcante de Souza

2006-04-01

Full Text Available OBJETIVO: avaliar quantitativamente os atendimentos ambulatoriais em reumatologia, no município de São Paulo, para a população usuária do SUS (Sistema Único de Saúde. MÉTODOS: cálculo da porcentagem de execução da meta programada de consultas em reumatologia, conforme a Portaria 1101/GM, no município de São Paulo, para a população usuária do SUS. RESULTADOS: a execução da meta programada em reumatologia mostrou-se satisfatória, considerando o município como um todo, porém, as porcentagens de execução da meta programada variaram extremamente em cada região da cidade. Das cinco regiões, apenas duas apresentaram cobertura satisfatória, com um número maior de consultas do que as programadas para a região. Nas outras três regiões, as porcentagens de execução de meta programada mostraram-se muito baixas CONCLUSÕES: embora a oferta de consultas em reumatologia, no geral, tenha sido satisfatória, a distribuição deste recurso se mostrou extremamente heterogênea, sendo as regiões mais periféricas da cidade as menos favorecidas, por apresentarem um número menor de unidades de saúde que realizam tal atendimento. O excesso de consultas realizadas em relação às programadas pode ter como principais causas: o atendimento de uma demanda vinda de outros municípios, um número crescente de cidadãos tornando-se usuários do SUS e prováveis encaminhamentos inadequados para a especialidade.OBJECTIVE: To evaluate the rheumatology outpatients, clinic consultations in the Public Health Services (PHS in the city of São Paulo. METHODS: Calculation of rate of the programmed rheumatologic consultations, according to 1101 G/M decree, in São Paulo, to the users of PHS. RESULTS: The rate of the programmed rheumatologic consultations was satisfactory, taking into consideration the whole city, but it had an extreme range of variatins on each of the city regions. From the five regions, only two had a satisfactory cover, with a

Analytical Chemistry Laboratory (ACL) procedure compendium

International Nuclear Information System (INIS)

1993-01-01

This volume contains the interim change notice for the safety operation procedure for hot cell. It covers the master-slave manipulators, dry waste removal, cell transfers, hoists, cask handling, liquid waste system, and physical characterization of fluids

Stable isotopes suggest differences in diet between historic and reintroduced Przewalskís horses in the Gobi desert

Science.gov (United States)

Burnik Šturm, Martina; Spasskaya, Natalia N.; Sablin, Mikhail V.; Voigt, Christian C.; Kaczensky, Petra

2016-04-01

In historic times, two wild equid species, the Przewalski᾽s horse (PH; Equus ferus przewalskii) and the Asiatic wild ass (khulan, KH; Equus hemionus), roamed the Eurasian steppes. By the end of the 1960s, PHs had been driven to extinction in the wild and the range of KHs became severely restricted to the least productive habitats. However, PHs survived in captivity and reintroductions since the 1990s have brought the species back to parts of its native range in Mongolia and northern China where they again overlap with KHs. Ecological research on PHs and KHs has increased in recent years, but very little information is available on the ecology of the original PHs prior to extinction in the wild. We applied stable isotope analysis (13C, 15N, and 2H) of segmentally cut tail hair of PHs and KHs, collected during expeditions in NW China and SW Mongolia in 1889-1899, to draw inferences about the species feeding ecology. We compared tail hair isotope patterns of historic individuals to those of their extant counterparts from the Mongolian Gobi. A previous study of isotopic tail hair signatures of extant PHs (N=6) and KHs (N=6) suggested species specific differences in diet, with PHs being year-round grazers, but KHs switching between being grazers in summer and mixed feeders in winter (Burnik Šturm et al., in prep.). The comparison of isotope patterns of extant with historic samples confirms diet seasonality in historic KHs (N=3), but detects the same seasonality in five out of six PHs, suggesting that historic PHs had a different isotopic dietary niche than extant PHs. While we are still unable to fully understand the underlying reasons for this change in PHs, our results clearly suggest that the isotopic dietary niche of PHs was wider in the past, suggesting a higher diet flexibility, and overlapped with that of KHs, suggesting a high competition potential over Gobi pastures between the two equid species in historic times. Reference: Burnik Šturm, M., Ganbaatar, O

Presence and fate of priority substances in domestic greywater treatment and reuse systems

DEFF Research Database (Denmark)

Donner, E.; Eriksson, Eva; Revitt, M.

2010-01-01

) or "Priority Hazardous Substances" (PHS). Significant knowledge gaps are identified. A wide range of potential treatment trains are available for greywater treatment and reuse but treatment efficiency data for priority substances and other micropollutants is very limited. Geochemical modelling indicates......A wide range of household sources may potentially contribute to contaminant loads in domestic greywater. The ability of greywater treatment systems to act as emission control barriers for household micropollutants, thereby providing environmental benefits in addition to potable water savings, have...... not been fully explored. This paper investigates the sources, presence and potential fate of a selection of xenobiotic micropollutants in on-site greywater treatment systems. All of the investigated compounds are listed under the European Water Framework Directive as either "Priority Substances" (PS...

Biostimulant Action of Protein Hydrolysates: Unraveling Their Effects on Plant Physiology and Microbiome.

Science.gov (United States)

Colla, Giuseppe; Hoagland, Lori; Ruzzi, Maurizio; Cardarelli, Mariateresa; Bonini, Paolo; Canaguier, Renaud; Rouphael, Youssef

2017-01-01

Plant-derived protein hydrolysates (PHs) have gained prominence as plant biostimulants because of their potential to increase the germination, productivity and quality of a wide range of horticultural and agronomic crops. Application of PHs can also alleviate the negative effects of abiotic plant stress due to salinity, drought and heavy metals. Recent studies aimed at uncovering the mechanisms regulating these beneficial effects indicate that PHs could be directly affecting plants by stimulating carbon and nitrogen metabolism, and interfering with hormonal activity. Indirect effects could also play a role as PHs could enhance nutrient availability in plant growth substrates, and increase nutrient uptake and nutrient-use efficiency in plants. Moreover, the beneficial effects of PHs also could be due to the stimulation of plant microbiomes. Plants are colonized by an abundant and diverse assortment of microbial taxa that can help plants acquire nutrients and water and withstand biotic and abiotic stress. The substrates provided by PHs, such as amino acids, could provide an ideal food source for these plant-associated microbes. Indeed, recent studies have provided evidence that plant microbiomes are modified by the application of PHs, supporting the hypothesis that PHs might be acting, at least in part, via changes in the composition and activity of these microbial communities. Application of PHs has great potential to meet the twin challenges of a feeding a growing population while minimizing agriculture's impact on human health and the environment. However, to fully realize the potential of PHs, further studies are required to shed light on the mechanisms conferring the beneficial effects of these products, as well as identify product formulations and application methods that optimize benefits under a range of agro-ecological conditions.

Optimal Scheduling of Material Handling Devices in a PCB Production Line: Problem Formulation and a Polynomial Algorithm

Directory of Open Access Journals (Sweden)

Ada Che

2008-01-01

Full Text Available Modern automated production lines usually use one or multiple computer-controlled robots or hoists for material handling between workstations. A typical application of such lines is an automated electroplating line for processing printed circuit boards (PCBs. In these systems, cyclic production policy is widely used due to large lot size and simplicity of implementation. This paper addresses cyclic scheduling of a multihoist electroplating line with constant processing times. The objective is to minimize the cycle time, or equivalently to maximize the production throughput, for a given number of hoists. We propose a mathematical model and a polynomial algorithm for this scheduling problem. Computational results on randomly generated instances are reported.

A new bed-exiting alarm system for welfare facility residents.

Science.gov (United States)

Ogawa, Hidekuni; Yonezawa, Yoshiharu; Maki, Hiromichi; Caldwell, W

2009-01-01

A newly developed alarm system detects welfare facility residents leaving their beds, and does not respond to the care staff, who wear shoes or slippers. It employs a stainless steel tape electrode, several linear integrated circuits and a low-power 8-bit single chip microcomputer. The electrode, which is used as a bed-exiting detection sensor, is attached to the floor mat to record changes in the always-present AC (alternating current) voltage induced on the patient's body by electrostatic coupling from the standard 100 volt, 60 Hz AC utility power wiring in the room walls and ceiling. The resident's body movements, before trying to get out of bed and after leaving the bed, are detected by the microcomputer from changes in the induced AC voltage. The microcomputer alerts the care staff station, via a power line communication system or PHS (personal handy phone System).

Detection of QTLs for traits associated with pre-harvest sprouting resistance in bread wheat (Triticum aestivum L.).

Science.gov (United States)

Cao, Liangzi; Hayashi, Kazuki; Tokui, Mayumi; Mori, Masahiko; Miura, Hideho; Onishi, Kazumitsu

2016-03-01

Pre-harvest sprouting (PHS) is one of the serious problems for wheat production, especially in rainy regions. Although seed dormancy is the most critical trait for PHS resistance, the control of heading time should also be considered to prevent seed maturation during unfavorable conditions. In addition, awning is known to enhance water absorption by the spike, causing PHS. In this study, we conducted QTL analysis for three PHS resistant related traits, seed dormancy, heading time and awn length, by using recombinant inbred lines from 'Zenkouji-komugi' (high PHS resistance) × 'Chinese Spring' (weak PHS resistance). QTLs for seed dormancy were detected on chromosomes 1B (QDor-1B) and 4A (QDor-4A), in addition to a QTL on chromosome 3A, which was recently cloned as TaMFT-3A. In addition, the accumulation of the QTLs and their epistatic interactions contributed significantly to a higher level of dormancy. QDor-4A is co-located with the Hooded locus for awn development. Furthermore, an effective QTL, which confers early heading by the Zenkouji-komugi allele, was detected on the short arm of chromosome 7B, where the Vrn-B3 locus is located. Understanding the genetic architecture of traits associated with PHS resistance will facilitate the marker assisted selection to breed new varieties with higher PHS resistance.

Microbolometer spectrometer opens hoist of new applications

NARCIS (Netherlands)

Leijtens, J.A.P.; Smorenburg, C.; Escudero, I.; Boslooper, E.C.; Visser, H.; Helden, W.A. van; Breussin, F.N.

2004-01-01

Current Thermal infra red ( 7..14μm) multispectral imager instruments use cryogenically cooled Mercury Cadmium Telluride (MCT or HgCdTe) detectors. This causes the instruments to be bulky, power hungry and expensive. For systems that have medium NETD (Noise Equivalent Temperature Difference)

Exploring interactions between payment for hydrologic service policies, landowner decisions, and ecohydrology in a Mexican cloud forest watershed: Is there a disconnect between the policy and the resource?

Science.gov (United States)

Asbjornsen, H.; Geissert, D.; Gomez-Tagle, A.; Holwerda, F.; Manson, R.; Perez-Maqueo, O.; Munoz-Villers, L.; Scullion, J.

2013-05-01

pasture evapotranspiration. Nevertheless, the pasture showed higher surface runoff for the most intense storms, indicating a diminished infiltration capacity. Young pine plantations and regenerating cloud forest had higher evapotranspiration and therefore higher water yield relative to mature cloud forest. Our analysis suggests a disconnect between PHS policies and the hydrological services provided through forest conservation and tree planting. The implications of this apparent disconnect are discussed within the context of designing effective policies for enhancing hydrologic services, and the importance of site-based research and monitoring to improve understanding of coupled social-ecohydrological systems.

Reliability of telecommunications systems following a major disaster: survey of secondary and tertiary emergency institutions in Miyagi Prefecture during the acute phase of the 2011 Great East Japan Earthquake.

Science.gov (United States)

Kudo, Daisuke; Furukawa, Hajime; Nakagawa, Atsuhiro; Abe, Yoshiko; Washio, Toshikatsu; Arafune, Tatsuhiko; Sato, Dai; Yamanouchi, Satoshi; Ochi, Sae; Tominaga, Teiji; Kushimoto, Shigeki

2014-04-01

Telecommunication systems are important for sharing information among health institutions to successfully provide medical response following disasters. The aim of this study was to clarify the problems associated with telecommunication systems in the acute phase of the Great East Japan Earthquake (March 11, 2011). All 72 of the secondary and tertiary emergency hospitals in Miyagi Prefecture were surveyed to evaluate the telecommunication systems in use during the 2011 Great Japan Earthquake, including satellite mobile phones, multi-channel access (MCA) wireless systems, mobile phones, Personal Handy-phone Systems (PHS), fixed-line phones, and the Internet. Hospitals were asked whether the telecommunication systems functioned correctly during the first four days after the earthquake, and, if not, to identify the cause of the malfunction. Each telecommunication system was considered to function correctly if the hospital staff could communicate at least once in every three calls. Valid responses were received from 53 hospitals (73.6%). Satellite mobile phones functioned correctly at the highest proportion of the equipped hospitals, 71.4%, even on Day 0. The MCA wireless system functioned correctly at the second highest proportion of the equipped hospitals. The systems functioned correctly at 72.0% on Day 0 and at 64.0% during Day 1 through Day 3. The main cause of malfunction of the MCA wireless systems was damage to the base station or communication lines (66.7%). Ordinary (personal or general communication systems) mobile phones did not function correctly at any hospital until Day 2, and PHS, fixed-line phones, and the Internet did not function correctly at any area hospitals that were severely damaged by the tsunami. Even in mildly damaged areas, these systems functioned correctly at telecommunications systems do not function.

Crane. Incidental Classroom Instruction 20295

Energy Technology Data Exchange (ETDEWEB)

Reynolds, Richard Jennings [Los Alamos National Laboratory

2016-04-01

The purpose of this course is to introduce safe hoisting and rigging practices to personnel who are attempting to become LANL incidental crane operators and to review and refresh safe hoisting and rigging practices with existing incidental crane operators.

Development of a Control System for PRIDE Remote Servo-manipulator

International Nuclear Information System (INIS)

Lee, Jong Kwang; Park, Byung Suk; Lee, Hyo Jik; Kim, Kyung Tae; Kim, Sung Hyun; Park, Hee Sung; Kim, Young Hwan; Jung, Jae Hoo; Kim, Ki Ho; Kim, Ho Dong

2009-12-01

KAERI is developing the PRIDE(PyRoprocess Integrated inactive DEmonstration) facility to verify the integrated performance of full Pyroprocess flow. A main process cell in the PRIDE facility will be filled with argon gas which prohibits direct access by human operators. Therefore, all the operation and maintenance of the process equipment is performed remotely through a master-slave manipulation. This research focuses on the design, fabrication, and interface of a control system which integrates several hardware systems such as a dual arm master-slave servo-manipulator, a horizontally moving transporter for a master manipulator, a bridge transporter for a slave manipulator, a chain hoist, camera systems and their display system, a manual console, and a pendant, etc. Also, a bilateral force-reflection controller considering an elasticity and vibration modes of wire cable has been developed for master-slave remote manipulation. The results obtained in this study will be applied for the force-reflection control of the bridge-transported master-slave servo-manipulator system for use in the PRIDE facility. Since this research is an essential work in robotics related fields, the results would be widely used for developing power manipulators and process automation equipment

Development of a Control System for PRIDE Remote Servo-manipulator

Energy Technology Data Exchange (ETDEWEB)

Lee, Jong Kwang; Park, Byung Suk; Lee, Hyo Jik; Kim, Kyung Tae; Kim, Sung Hyun; Park, Hee Sung; Kim, Young Hwan; Jung, Jae Hoo; Kim, Ki Ho; Kim, Ho Dong

2009-12-15

KAERI is developing the PRIDE(PyRoprocess Integrated inactive DEmonstration) facility to verify the integrated performance of full Pyroprocess flow. A main process cell in the PRIDE facility will be filled with argon gas which prohibits direct access by human operators. Therefore, all the operation and maintenance of the process equipment is performed remotely through a master-slave manipulation. This research focuses on the design, fabrication, and interface of a control system which integrates several hardware systems such as a dual arm master-slave servo-manipulator, a horizontally moving transporter for a master manipulator, a bridge transporter for a slave manipulator, a chain hoist, camera systems and their display system, a manual console, and a pendant, etc. Also, a bilateral force-reflection controller considering an elasticity and vibration modes of wire cable has been developed for master-slave remote manipulation. The results obtained in this study will be applied for the force-reflection control of the bridge-transported master-slave servo-manipulator system for use in the PRIDE facility. Since this research is an essential work in robotics related fields, the results would be widely used for developing power manipulators and process automation equipment.

Report from the workshop on Pallister-Hall syndrome and related phenotypes

Energy Technology Data Exchange (ETDEWEB)

Biesecker, L.G.; Kang, Seongman; Peters, K. [Johns Hopkins Univ., Baltimore, MD (United States)] [and others

1996-10-02

A one day workshop was convened on the NIH campus on March 1, 1996, in Bethesda, Maryland to discuss emerging clinical and molecular information on Pallister-Hall syndrome (PHS) and related disorders. PHS is a pleiotropic autosomal dominant disorder comprising hypothalamic hamartoma, pituitary dysfunction, central polydactyly, and visceral malformations. The goals of the meeting were to update participants in the latest clinical and research findings in the disorder, review the history and evolution of the understanding of the phenotype, determine diagnostic criteria for PHS, and make recommendations for clinical evaluation of individuals affected by PHS. These topics were addressed by several speakers and data were displayed from several of the large pedigrees of autosomal dominant PHS. 37 refs., 4 tabs.

Industry-relevant magnetron sputtering and cathodic arc ultra-high vacuum deposition system for in situ x-ray diffraction studies of thin film growth using high energy synchrotron radiation

OpenAIRE

Schroeder, Jeremy; Thomson, W.; Howard, B.; Schell, N.; Näslund, Lars-Åke; Rogström, Lina; Johansson-Jöesaar, Mats P.; Ghafoor, Naureen; Odén, Magnus; Nothnagel, E.; Shepard, A.; Greer, J.; Birch, Jens

2015-01-01

We present an industry-relevant, large-scale, ultra-high vacuum (UHV) magnetron sputtering and cathodic arc deposition system purposefully designed for time-resolved in situ thin film deposition/annealing studies using high-energy (greater than50 keV), high photon flux (greater than10(12) ph/s) synchrotron radiation. The high photon flux, combined with a fast-acquisition-time (less than1 s) two-dimensional (2D) detector, permits time-resolved in situ structural analysis of thin film formation...

76 FR 9376 - Proposed Extension of Existing Information Collection on Qualification/Certification Program and...

Science.gov (United States)

2011-02-17

... Extension of Existing Information Collection on Qualification/Certification Program and Man Hoist Operators... 77.107-1 on Qualification/Certification Program and Man Hoist Operators Physical Fitness. DATES: All... Labor or Secretary of Health and Human Services must make frequent inspections and investigations in...

Preliminary design for spent fuel canister handling systems in a canister transfer and installation vehicle

International Nuclear Information System (INIS)

Wendelin, T.; Suikki, M.

2008-12-01

The report presents a spent fuel canister transfer and installation vehicle. The vehicle is used for carrying the fuel canister into a disposal tunnel and installing it into a deposition hole. The report outlines basic requirements and a design for canister handling equipment used in a canister transfer and installation vehicle, a description regarding the operation and maintenance of the equipment, as well as a cost estimate. Specific vehicles will be manufactured for all canister types in order to minimize the height of the disposal tunnels. This report is only focused on a transfer and installation vehicle for OL1-2 fuel canisters. Detailed designing and selection of final components have not yet been carried out. The report also describes the vehicle's requirements for the structures of a repository system, as well as actions in possible malfunction or fault situations. The spent fuel canister is brought from an encapsulation plant by a canister lift down to the repository level. The fuel canister is driven from the canister lift by an automated guided vehicle onto a canister hoist at a canister loading station. The canister transfer and installation vehicle is waiting for the canister with its radiation shield in an upright position above the canister hoist. The hoist carries the canister upward until the vehicle's own lifting means grab hold of the canister and raise it up into the vehicle's radiation shield. This is followed by turning the radiation shield to a transport position and by closing it in a radiation-proof manner against a rear radiation shield. The vehicle is driven along the central tunnel into the disposal tunnel and parked on top of the deposition hole. The vehicle's radiation shield is turned to the upright position and the canister is lowered with the vehicle's hydraulic winches into a bentonite-lined deposition hole. The radiation shield is turned back to the transport position and the vehicle can be driven out of the disposal tunnel

The use of two-axis high precision inclination sensors in determining headframe deflection

Directory of Open Access Journals (Sweden)

Jaśkowski Wojciech

2018-01-01

Full Text Available Reliability of transport equipment in the shaft depends, among other things, on the accuracy of the vertical foundation of the headframe together with elements of the hoisting equipment over the shaft. Any deviations beyond the installation and movement tolerances may cause incorrect or even dangerous operation of the hoisting equipment in the shaft. Therefore the headframe is subjected to periodic inventory measurements, which prevent the movement in the shaft and the smooth operation of the whole underground mine. The Wieliczka Salt Mine developed a project for the installation of precision Nivel 220 two-axis inclinometers on Kinga and Daniłowicz headframes. The paper summarizes the initial conclusions resulting from the first year of the system operation and indicates the directions of its development.

Metabolic engineering of monoterpene biosynthesis in tomato fruits via introduction of the non-canonical substrate neryl diphosphate.

Science.gov (United States)

Gutensohn, Michael; Nguyen, Thuong T H; McMahon, Richard D; Kaplan, Ian; Pichersky, Eran; Dudareva, Natalia

2014-07-01

Recently it was shown that monoterpenes in tomato trichomes (Solanum lycopersicum) are synthesized by phellandrene synthase 1 (PHS1) from the non-canonical substrate neryl diphosphate (NPP), the cis-isomer of geranyl diphosphate (GPP). As PHS1 accepts both NPP and GPP substrates forming different monoterpenes, it was overexpressed in tomato fruits to test if NPP is also available in a tissue highly active in carotenoid production. However, transgenic fruits overexpressing PHS1 produced only small amounts of GPP-derived PHS1 monoterpene products, indicating the absence of endogenous NPP. Therefore, NPP formation was achieved by diverting the metabolic flux from carotenoids via expression of tomato neryl diphosphate synthase 1 (NDPS1). NDPS1 transgenic fruits produced NPP-derived monoterpenes, including nerol, neral and geranial, while displaying reduced lycopene content. NDPS1 co-expression with PHS1 resulted in a monoterpene blend, including β-phellandrene, similar to that produced from NPP by PHS1 in vitro and in trichomes. Unexpectedly, PHS1×NDPS1 fruits showed recovery of lycopene levels compared to NDPS1 fruits, suggesting that redirection of metabolic flux is only partially responsible for the reduction in carotenoids. In vitro assays demonstrated that NPP serves as an inhibitor of geranylgeranyl diphosphate synthase, thus its consumption by PHS1 leads to recovery of lycopene levels. Monoterpenes produced in PHS1×NDPS1 fruits contributed to direct plant defense negatively affecting feeding behavior of the herbivore Helicoverpa zea and displaying antifungal activity against Botrytis cinerea. These results show that NPP-derived terpenoids can be produced in plant tissues; however, NPP has to be consumed to avoid negative impacts on plant metabolism. Copyright © 2014 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

Design and fabrication of a glovebox for the Plasma Hearth Process radioactive bench-scale system

International Nuclear Information System (INIS)

Wahlquist, D.R.

1996-01-01

This paper presents some of the design considerations and fabrication techniques for building a glovebox for the Plasma Hearth Process (PHP) radioactive bench-scale system. The PHP radioactive bench-scale system uses a plasma torch to process a variety of radioactive materials into a final vitrified waste form. The processed waste will contain plutonium and trace amounts of other radioactive materials. The glovebox used in this system is located directly below the plasma chamber and is called the Hearth Handling Enclosure (HHE). The HHE is designed to maintain a confinement boundary between the processed waste and the operator. Operations that take place inside the HHE include raising and lowering the hearth using a hydraulic lift table, transporting the hearth within the HHE using an overhead monorail and hoist system, sampling and disassembly of the processed waste and hearth, weighing the hearth, rebuilding a hearth, and sampling HEPA filters. The PHP radioactive bench-scale system is located at the TREAT facility at Argonne National Laboratory-West in Idaho Falls, Idaho

29 CFR 1918.85 - Containerized cargo operations.

Science.gov (United States)

2010-07-01

...” (activated) container gantry crane lifting beams or attached devices are used as anchorage points, the... maximum cargo weight, in pounds. (b) Container weight. No container shall be hoisted by any lifting... of loading or discharging, or every crane or other hoisting equipment operator and signalman, that...

The physicochemical properties and solubility of pharmaceuticals – Methyl xanthines

International Nuclear Information System (INIS)

Pobudkowska, Aneta; Domańska, Urszula; Kryska, Justyna A.

2014-01-01

Highlights: • Solubility of methyl xanthines in water and alcohols was measured. • Solubility in water, or alcohols was of the order of 10 −4 in mole fraction. • Experimental aqueous pK a ’s values are reported for the selected drugs. • The basic thermodynamic functions were determined. - Abstract: The aim of this study was to evaluate the physio-chemical properties and solubility of three pharmaceuticals (Phs): theophylline, 7-(β-hydroxyethyl) theophylline, and theobromine in binary systems in different solvents. The solvents used were water, ethanol, and 1-octanol. Score of the solubility of these substances is being important for their dissolution effect inside the cell, the transportation by body fluids and the penetration possibility of lipid membranes. The Phs were classified to the group of methyl xanthines, which contain purine in their structure. Although they are mainly obtained via chemical synthesis, they can be also found in natural ingredients such as cocoa beans and tea leaves. These drugs are mainly acting on the central nervous system but are also used in the treatment of asthma or blood vessels. Solubility of 7 (β-hydroxyethyl) theophylline and theophylline were tested using synthetic method. In case of theobromine, which solubility is very small in the solvents noted, the spectrophotometric method has been used to measure its solubility. After designating phase diagrams of each of the solubility in the bipolar system, the experimental points have been correlated with the equations: Wilson, NRTL, UNIQUAC. Results show that theophylline and its derivatives show the best solubility from all tested Phs. Another method also used during this study was the differential scanning calorimetry (DSC), which allowed designation of the thermal properties of Phs. The fusion temperature and the enthalpy of melting were measured. Unfortunately, it was not possible to determine the fusion temperature and enthalpy of melting of theobromine, because of

Interaction between two subducting plates under Tokyo and its possible effects on seismic hazards

Science.gov (United States)

Wu, Francis; Okaya, David; Sato, Hiroshi; Hirata, Naoshi

2007-09-01

Underneath metropolitan Tokyo the Philippine Sea plate (PHS) subducts to the north on top of the westward subducting Pacific plate (PAC). New, relatively high-resolution tomography images the PHS as a well-defined subduction zone under western Kanto Plain. As PAC shoals under eastern Kanto, the PHS lithosphere is being thrusted into an increasingly tighter space of the PAC-Eurasian mantle wedge. As a result, zones of enhanced seismicity appear under eastern Kanto at the top of PHS, internal to PHS and also at its contact with PAC. These zones are located at depths greater than the causative fault of the disastrous 1923 Great Tokyo ``megathrust'' earthquake, in the vicinity of several well-located historical, damaging (M6 and M7) earthquakes. Thus a rather unique interaction between subducting plates under Tokyo may account for additional seismic hazards in metropolitan Tokyo.

Food grade microemulsion systems: canola oil/lecithin:n-propanol/water.

Science.gov (United States)

Abbasi, Soleiman; Radi, Mohsen

2016-03-01

In this study, the capability of a natural surfactant, lecithin, and the influence of ionic strength, pH, and temperature on some properties of a food grade microemulsion system were evaluated. For this purpose, the pseudoternary phase diagrams of canola oil/lecithin:n-propanol/water microemulsions in the presence of different salts (NaCl and CaCl2), ionic strengths, pHs, and temperatures were constructed. Our findings showed that the presence of salts slightly increased the W/O areas on the phase diagrams, whereas pH variation was not effective on the microemulsion formation. The expansion of microemulsion areas with temperature indicated the greater triglycerides solubilization capacity of lecithin based microemulsions at higher temperatures. These findings revealed the efficiency of lecithin-based microemulsion system for solubilization of triglycerides which can potentially be used for extraction of edible vegetable oils particularly canola oil. Copyright © 2015 Elsevier Ltd. All rights reserved.

Grave fraudulence in medical device research: a narrative review of the PIN seeding study for the Pinnacle hip system.

Science.gov (United States)

Steffen, Joan E; Fassler, Ella A; Reardon, Kevin J; Egilman, David S

2018-01-01

In 2001, DePuy, a wholly-owned subsidiary of Johnson & Johnson (J&J/DePuy), initiated a seeding study called the "Multi-center, Prospective, Clinical Evaluation of Pinnacle Acetabular Implants in Total Hip Arthroplasty" (PIN Study). J&J/DePuy designed this study to develop new business opportunities during the launch of their Pinnacle Hip System (PHS) and generate survivorship data for marketing. This article, the first review of a seeding trial for a medical device, examines internal company documents relating to the PIN Study; the analysis herein focuses on the integrity of J&J/DePuy's research practices in conception, implementation, and analysis. J&J/DePuy violated the study protocol and manipulated data; consented participants in violation of standards protecting human subjects; and did not secure Institutional Review Board approval for all study sites. J&J/DePuy used PIN Study results as the "fundamental selling point" for the PHS. Medical device seeding trials are distinct from previously-documented pharmaceutical seeding trials because companies can profit directly from device sales and because these studies may be the first clinical evaluation of the device (as was the case for the PIN Study). Seeding trials are malleable marketing projects, not rigorous scientific studies. Regulatory bodies, physicians, and others should be vigilant for persuasive marketing accounts disguised as science.

30 CFR 77.1401 - Automatic controls and brakes.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic controls and brakes. 77.1401 Section... MINES Personnel Hoisting § 77.1401 Automatic controls and brakes. Hoists and elevators shall be equipped with overspeed, overwind, and automatic stop controls and with brakes capable of stopping the elevator...

X-ray imaging with amorphous selenium: Pulse height measurements of avalanche gain fluctuations

International Nuclear Information System (INIS)

Lui, Brian J. M.; Hunt, D. C.; Reznik, A.; Tanioka, K.; Rowlands, J. A.

2006-01-01

Avalanche multiplication in amorphous selenium (a-Se) can provide a large, adjustable gain for active matrix flat panel imagers (AMFPI), enabling quantum noise limited x-ray imaging during both radiography and fluoroscopy. In the case of direct conversion AMFPI, the multiplication factor for each x ray is a function of its depth of interaction, and the resulting variations in gain can reduce the detective quantum efficiency (DQE) of the system. An experimental method was developed to measure gain fluctuations by analyzing images of individual x rays that were obtained using a video camera with an a-Se target operated in avalanche mode. Pulse height spectra (PHS) of the charge produced per x ray were recorded for monoenergetic 30.9, 49.4, and 73.8 keV x-ray sources. The rapid initial decay and long tail of each PHS can be explained by a model in which positive charge dominates the initiation of avalanche. The Swank information factor quantifies the effect of gain fluctuation on DQE and was calculated from the PHS. The information factor was found to be 0.5 for a 25 μm a-Se layer with a maximum gain of ∼300. Changing the energy of the incident x ray influenced the range of the primary photoelectron and noticeably affected the tail of the experimental PHS, but did not significantly change the avalanche Swank factor

30 CFR 57.19079 - Blocking mine cars.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Blocking mine cars. 57.19079 Section 57.19079... Hoisting Procedures § 57.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

30 CFR 56.19079 - Blocking mine cars.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Blocking mine cars. 56.19079 Section 56.19079... Hoisting Procedures § 56.19079 Blocking mine cars. Where mine cars are hoisted by cage or skip, means for blocking cars shall be provided at all landings and also on the cage. ...

46 CFR 163.002-15 - Performance.

Science.gov (United States)

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Performance. 163.002-15 Section 163.002-15 Shipping...: SPECIFICATIONS AND APPROVAL CONSTRUCTION Pilot Hoist § 163.002-15 Performance. (a) Each pilot hoist must have sufficient performance capability to pass the approval tests in § 163.002-21. (b) [Reserved] ...

Structure of the posthepatic septum and its influence on visceral topology in the tegu lizard, Tupinambis merianae (Teiidae: Reptilia).

Science.gov (United States)

Klein, Wilfried; Abe, Augusto S; Andrade, Denis V; Perry, Steven F

2003-11-01

The posthepatic septum (PHS) divides the body cavity of Tupinambis merianae into two parts: the cranial one containing the lungs and liver and the caudal one containing the remaining viscera. The PHS is composed of layers of collagenous fibers and bundles of smooth muscle, neither of which show systematic orientation, as well as isolated blood vessels, lymphatic vessels, and nerves. Striated muscle of the abdominal wall does not invade the PHS. The contractions of the smooth muscles may stabilize the pleurohepatic cavity under conditions of elevated aerobic needs rather than supporting breathing on a breath-by-breath basis. Surgical removal of the PHS changes the anatomical arrangement of the viscera significantly, with stomach and intestine invading the former pleurohepatic cavity and reducing the space for the lungs. Thus, the PHS is essential to maintain the visceral topography in Tupinambis. Copyright 2003 Wiley-Liss, Inc.

Static lung compliance and body pressures in Tupinambis merianae with and without post-hepatic septum.

Science.gov (United States)

Klein, Wilfried; Abe, Augusto S; Perry, Steven F

2003-04-15

The surgical removal of the post-hepatic septum (PHS) in the tegu lizard, Tupinambis merianae, significantly reduces resting lung volume (V(Lr)) and maximal lung volume (V(Lm)) when compared with tegus with intact PHS. Standardised for body mass (M(B)), static lung compliance was significantly less in tegus without PHS. Pleural and abdominal pressures followed, like ventilation, a biphasic pattern. In general, pressures increased during expiration and decreased during inspiration. However, during expiration pressure changes showed a marked intra- and interindividual variation. The removal of the PHS resulted in a lower cranio-caudal intracoelomic pressure differential, but had no effect on the general pattern of pressure changes accompanying ventilation. These results show that a perforated PHS that lacks striated muscle has significant influence on static breathing mechanics in Tupinambis and by analogy provides valuable insight into similar processes that led to the evolution of the mammalian diaphragm.

The Role of Energy Storages in Energy Independent Croatia

DEFF Research Database (Denmark)

Krajačić, Goran; Mathiesen, Brian Vad; Duić, Neven

2009-01-01

electricity, heat and transport demands, and including renewable energy, power plants, and combined heat and power production (CHP) for district heating. Using the 2007 energy system the wind power share is increased by two energy storage options: Pumped Hydro and Heat Pumps in combination with Heat Storages....... The results show that such options can enable an increased penetration of wind power. Using pumped hydro storage (PHS) may increase wind power penetration from 0.5 TWh, for existing PHS installations and up to 6 TWh for very large installations. Using large heat pumps and heat storages in combination...... with specific regulation of power system could additionally increase wind penetration for 0.37 TWh. Hence, with the current technologies installed in the Croatian energy system the installed pumped hydro- plant may facilitate more than 10% wind power in the electricity system. In future research more precise...

Using combined system of shaft guides for buckets during shaft deepening

Energy Technology Data Exchange (ETDEWEB)

Durov, E.M.; Ivenskii, N.S.; Alekhin, P.I.

1981-06-01

This paper discusses a system of shaft guides used in the Krasnopol'evsk underground coal mine. The existing skip shaft 514 m deep is deepened to a depth of 700 m. Shaft design is adapted to a system of two pairs of skips, however, only one pair of skips is in operation and the other has been removed. The free space can be used to remove rock material from shaft bottom. It is noted that a system of buckets moving along elastic shaft guides made of rope or along rigid shaft guides can be used. Both solutions have numerous advantages. If rope guides are used time consuming installation of shaft guides is unnecessary in the zone close to the bottom. If rigid guides are used capacity of the bucket can be significantly increased. A system which combines advantages of both solutions is used: in the lower part of the shaft being deepened, buckets are guided by rope, and in the upper zone in which rigid shaft guides have been installed the bucket moves along rigid guides and rope guides simultaneously. Design of the element guiding the bucket is shown in two diagrams. It is noted that using the combined system of shaft guides increases capacity of the hoisting system by 1.5 times.

Asset Management and Facility Equipment Maintenance Nexus: Maintenance Effectiveness

Science.gov (United States)

2013-09-01

MOTOR 60 CHECK ADJUSTMENT OF TEMPERATURE S\\MTCHES 70 CHECK TO\\NER MONORAIL HOIST MOTOR AND CONTROLS 71 CHECK TO\\NER HEATERS AND FAN MOTORS 80 INSPECT...SEALS 70 SERVICE TOWER MONORAILS & GATE WHEEL HOISTS 80 CHECK OIL LEVEL IN GEAR REDUCERS ( EP 140) 90 INSPECT & DRESS CABLE AT DRUM ENDS IN BOTH

Interactions between payments for hydrologic services, landowner decisions, and ecohydrological consequences: synergies and disconnection in the cloud forest zone of central Veracruz, Mexico

Directory of Open Access Journals (Sweden)

Heidi Asbjornsen

2017-06-01

hydrologic services and people's decisions, behavior, and knowledge regarding forest conservation and water. Using central Veracruz as our case study, we identify areas of both synchrony and disconnection between PHS goals and outcomes. Mature and regenerating cloud forests (targeted by PHS were found to produce enhanced hydrologic services relative to areas converted to pasture, including reduced peak flows during large rain events and maintenance of dry-season base flows. However, unexpectedly, these hydrologic benefits from cloud forests were not necessarily greater than those from other vegetation types. Consequently, the location of forests in strategic watershed positions (e.g., where deforestation risk or hydrologic recharge are high may be more critical than forest type in promoting hydrologic functions within watersheds and should be considered when targeting PHS payments. While our results suggest that participation in PHS improved the level of knowledge among watershed inhabitants about forest-water relationships, a mismatch existed between payment amounts and landowner opportunity costs, which may contribute to the modest success in targeting priority areas within watersheds. Combined, these findings underscore the complexity of factors that influence motivations for PHS participation and land use decisions and behavior, and the importance of integrating understanding of both ecohydrological and socioeconomic dynamics into PHS design and implementation. We conclude by identifying opportunities for improving the design of PHS programs and recommending priority areas for future research and monitoring, both in Mexico and globally.

Clinical Manifestations, Outcomes, and Etiologies of Perinatal Stroke in Taiwan: Comparisons between Ischemic, and Hemorrhagic Stroke Based on 10-year Experience in A Single Institute.

Science.gov (United States)

Lee, Chien-Chung; Lin, Jainn-Jim; Lin, Kuang-Lin; Lim, Wai-Ho; Hsu, Kai-Hsiang; Hsu, Jen-Fu; Fu, Ren-Huei; Chiang, Ming-Chou; Chu, Shih-Ming; Lien, Reyin

2017-06-01

Perinatal stroke is a common cause of established neurological sequelae. Although several risk factors have been identified, many questions regarding causes and clinical outcomes remain unanswered. This study investigated the clinical manifestations and outcomes of perinatal stroke and identified its etiologies in Taiwan. We searched the reports of head magnetic resonance imaging and computed tomography performed between January 2003 and December 2012. The medical records of enrolled infants with perinatal stroke were also reviewed. Thirty infants with perinatal stroke were identified; 10 infants had perinatal arterial ischemic stroke (PAIS) and 20 had perinatal hemorrhagic stroke (PHS). Neonatal seizure was the most common manifestation and presented in 40% of infants with PAIS and 50% of infants with PHS. All survivors with PAIS and 77% of the surviving infants with PHS developed neurological sequelae. Acute seizure manifestation was associated with poststroke epilepsy in infants with PHS but not in infants with PAIS (86% vs. 0%, p=0.005). PAIS was mostly caused by dysfunctional hemostasis (20%) and embolism (20%), whereas PHS was mostly attributable to birth asphyxia (30%). Perinatal stroke is associated with high mortality and morbidity rates in infants. Clinically, it can be difficult to distinguish PAIS and PHS. One should keep a high level of suspicion, especially for PHS, if infants develop unexplained seizure, cyanosis, conscious change, anemia, and/or thrombocytopenia. A systematic diagnostic approach is helpful in identifying the etiologies of perinatal stroke. Copyright © 2016. Published by Elsevier B.V.

Waste isolation facility description for the spent fuel cycle, bedded salt

International Nuclear Information System (INIS)

1977-05-01

Details are given on surface facilities, shafts and hoists, mine facilities, ventilation systems, land improvements, and utilities. Accidents, confinement, and safety criteria are covered. Appendices are provided on mine layout and development, mine operations, shaft construction information, and analysis concerning canister rupture inside the proposed waste isolation facility

Distribution of tetracycline resistance genes in anaerobic treatment of waste sludge: The role of pH in regulating tetracycline resistant bacteria and horizontal gene transfer.

Science.gov (United States)

Huang, Haining; Chen, Yinguang; Zheng, Xiong; Su, Yinglong; Wan, Rui; Yang, Shouye

2016-10-01

Although pH value has been widely regarded as an important factor that affects resource recovery of waste sludge, the potential influence of diverse pHs on the distribution of tetracycline resistance genes (TRGs) during sludge anaerobic treatment is largely unknown. Here we reported that in the range of pH 4-10, 0.58-1.18 log unit increase of target TRGs was observed at pH 4, compared with that at pH 7, while 0.70-1.31 log unit further removal were obtained at pH 10. Mechanism study revealed that varied pHs not only altered the community structures of tetracycline resistant bacteria (TRB), but also changed their relative abundances, benefitting the propagation (acidic pHs) or attenuation (alkaline pHs) of TRB. Further investigation indicated that the amount and gene-possessing abilities of key genetic vectors for horizontal TRGs transfer were greatly promoted at acidic pHs but restricted under alkaline conditions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Creating a network of high-quality skilled nursing facilities: preliminary data on the postacute care quality improvement experiences of an accountable care organization.

Science.gov (United States)

Lage, Daniel E; Rusinak, Donna; Carr, Darcy; Grabowski, David C; Ackerly, D Clay

2015-04-01

Postacute care (PAC) is an important source of cost growth and variation in the Medicare program and is critical to accountable care organization (ACO) and bundled payment efforts to improve quality and value in the Medicare program, but ACOs must often look outside their walls to identify high-value external PAC partners, including skilled nursing facilities (SNFs). As a solution to this problem, the integrated health system, Partners HealthCare System (PHS) and its Pioneer ACO launched the PHS SNF Collaborative Network in October 2013 to identify and partner with high-quality SNFs. This study details the method by which PHS selected SNFs using minimum criteria based on public scores and secondary criteria based on self-reported measures, describes the characteristics of selected and nonselected SNFs, and reports SNF satisfaction with the collaborative. The selected SNFs (n = 47) had significantly higher CMS Five-Star scores than the nonselected SNFs (n = 93) (4.6 vs 3.2, P improving care in SNFs remain daunting, this approach can serve as a first step toward greater clinical collaboration between acute and postacute settings that will lead to better outcomes for frail older adults. © 2015, Copyright the Authors Journal compilation © 2015, The American Geriatrics Society.

Evaluation of Polymer Hermetically Sealed Tantalum Capacitors

Science.gov (United States)

Teverovsky, Alexander A.

2014-01-01

Polymer cathode tantalum capacitors have lower ESR (equivalent series resistance) compared to other types of tantalum capacitors and for this reason have gained popularity in the electronics design community. Their use allows improved performance of power supply systems along with substantial reduction of size and weight of the components used. However, these parts have poor thermal stability and can degrade in humid environments. Polymer hermetically sealed (PHS) capacitors avoid problems related to environmental degradation of molded case parts and can potentially replace current wet and solid hermetically sealed capacitors. In this work, PHS capacitors manufactured per DLA LAM DWG#13030 are evaluated for space applications. Several lots of capacitors manufactured over period from 2010 to 2014 were tested for the consistency of performance, electrical and thermal characteristics, highly accelerated life testing, and robustness under reverse bias and random vibration conditions. Special attention was given to analysis of leakage currents and the effect of long-term high temperature storage on capacitors in as is condition and after hermeticity loss. The results show that PHS capacitors might be especially effective for low-temperature applications or for system requiring a cold start-up. Additional screening and qualification testing have been recommended to assure the necessary quality of capacitors for space projects.

Industry-relevant magnetron sputtering and cathodic arc ultra-high vacuum deposition system for in situ x-ray diffraction studies of thin film growth using high energy synchrotron radiation.

Science.gov (United States)

Schroeder, J L; Thomson, W; Howard, B; Schell, N; Näslund, L-Å; Rogström, L; Johansson-Jõesaar, M P; Ghafoor, N; Odén, M; Nothnagel, E; Shepard, A; Greer, J; Birch, J

2015-09-01

We present an industry-relevant, large-scale, ultra-high vacuum (UHV) magnetron sputtering and cathodic arc deposition system purposefully designed for time-resolved in situ thin film deposition/annealing studies using high-energy (>50 keV), high photon flux (>10(12) ph/s) synchrotron radiation. The high photon flux, combined with a fast-acquisition-time (film formation processes. The high-energy synchrotron-radiation based x-rays result in small scattering angles (industry-relevant processes. We openly encourage the materials research community to contact us for collaborative opportunities using this unique and versatile scientific instrument.

46 CFR 163.002-27 - Production tests and examination.

Science.gov (United States)

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false Production tests and examination. 163.002-27 Section 163... examination. Each pilot hoist manufactured under Coast Guard approval must be tested as prescribed in § 163... laboratory must also conduct the visual examination described in § 163.002-21(b). The hoist may not be sold...

Key performance indicators for electric mining shovels and oil sands diggability

Science.gov (United States)

Patnayak, Sibabrata

A shovel performance monitoring study was undertaken in two oil sands mines operated by Syncrude Canada Ltd. using performance data obtained from P&H 4100 TS and BOSS electric mining shovels. One year of shovel performance data along with geological, geotechnical, and climatic data were analyzed. The approach adopted was to use current and voltage data collected from hoist and crowd motors and to calculate the energy and/or power associated with digging. Analysis of performance data along with digital video records of operating shovels indicated that hoist and crowd motor voltages and currents can be used to identify the beginning and the end of individual dig cycles. A dig cycle identification algorithm was developed. Performance indicators such as dig cycle time, hoist motor energy and power, and crowd motor energy and power were determined. The shovel performance indicators provide important insight into how geology, equipment and operators affect the digging efficiency. The hoist motor power is a useful key performance indicator for assessing diggability. Hoist motor energy consumption per tonne of material excavated and the number of dig cycles required for loading a truck can be useful key performance indicators for assessing operator performance and productivity. Analysis of performance data along with operators team schedules showed that the performance of a shovel can be significantly influenced by the operator's digging technique while digging uniform material. Up to 25% variability in hoist motor power consumption and 50% variability in productivity was noted between different operators. Shovel type and dipper teeth configuration can also influence the power draw on electrical motors during digging. There is no common agreement existing on the influence of bitumen content on oil sands diggability. By comparing the hoist motor power consumption, it was found that the rich ore was more difficult to dig than the lean ore. Similarly, estuarine ore was more

El sistema mediático mexicano desde una perspectiva criminológica: Retos y conflictos/The mexican media system from a criminological perspective: Challenges and conflicts

Directory of Open Access Journals (Sweden)

Roberto Alonso Ramos Erosa

2015-01-01

Full Text Available Speaking of media systems is not complex, but rather extensive. The media refers to anything; that has to do with mass media like newspapers, radio stations, internet and of course television. The Mexican media system has peculiarities, especially in its content, but virtually all media systems of the world are almost identical. The rise of media systems had to start from the middle of the last century but this does not refer to its existence has begun there; with the emergence of globalization media systems hoisted a network of relationships with communication structures in other countries, this allowed the arrival of information faster and supposedly more accurate. Mankind was no longer the need to wait weeks or months to find out what was happening across the world, enough to read a newspaper turn on the radio or watch television for "supposedly" informed about international developments and national. The Fact? Was in the palm of their hands.

Interaction of hyperalgesia and sensory loss in complex regional pain syndrome type I (CRPS I).

Science.gov (United States)

Huge, Volker; Lauchart, Meike; Förderreuther, Stefanie; Kaufhold, Wibke; Valet, Michael; Azad, Shahnaz Christina; Beyer, Antje; Magerl, Walter

2008-07-23

Sensory abnormalities are a key feature of Complex Regional Pain Syndrome (CRPS). In order to characterise these changes in patients suffering from acute or chronic CRPS I, we used Quantitative Sensory Testing (QST) in comparison to an age and gender matched control group. 61 patients presenting with CRPS I of the upper extremity and 56 healthy subjects were prospectively assessed using QST. The patients' warm and cold detection thresholds (WDT; CDT), the heat and cold pain thresholds (HPT; CPT) and the occurrence of paradoxical heat sensation (PHS) were observed. In acute CRPS I, patients showed warm and cold hyperalgesia, indicated by significant changes in HPT and CPT. WDT and CDT were significantly increased as well, indicating warm and cold hypoaesthesia. In chronic CRPS, thermal hyperalgesia declined, but CDT as well as WDT further deteriorated. Solely patients with acute CRPS displayed PHS. To a minor degree, all QST changes were also present on the contralateral limb. We propose three pathomechanisms of CRPS I, which follow a distinct time course: Thermal hyperalgesia, observed in acute CRPS, indicates an ongoing aseptic peripheral inflammation. Thermal hypoaesthesia, as detected in acute and chronic CRPS, signals a degeneration of A-delta and C-fibres, which further deteriorates in chronic CRPS. PHS in acute CRPS I indicates that both inflammation and degeneration are present, whilst in chronic CRPS I, the pathomechanism of degeneration dominates, signalled by the absence of PHS. The contralateral changes observed strongly suggest the involvement of the central nervous system.

Heart Rate Variability Frequency Domain Alterations among Healthy Nurses Exposed to Prolonged Work Stress

Directory of Open Access Journals (Sweden)

Rossana Borchini

2018-01-01

Full Text Available The deregulation of the autonomic nervous system assessed through the heart rate variability (HRV analysis is a promising pathway linking work stress and cardiovascular diseases. We aim to investigate the associations between HRV High Frequency (HF and Low Frequency (LF powers and work stress in a sample of 36 healthy nurses. Perceived work stress was assessed twice one year apart, using the Job Content and Effort Reward Imbalance questionnaires. This allows to classify nurses in three exposure groups: “prolonged high stress” (PHS, “recent high stress” (RHS and “stable low stress” (SLS. A 24-h ECG monitoring was later performed during a working day (WD and a subsequent resting day (RD. Statistically significantly lower (p < 0.02 HF and LF means were found in PHS and RHS nurses during the working periods. In the subsequent resting periods, HF means showed increases over time in the RHS (beta = +0.41, p < 0.05, but not in PHS nurses. LF means did not show any substantial increases in the resting periods, in the PHS group with geometric means lower when compared to SLS, in the non-working and resting periods. Our study evidences that both prolonged and recent perceived high work stress were associated with a reduction of HF and LF powers during work. In addition, prolonged stress was associated with a lack of recovery during not-working and resting periods.

Active Deformation in the Overriding Plate Associated with Temporal Changes of the Philippine Sea Plate Motion

Science.gov (United States)

Ishiyama, T.; Sato, H.; Van Horne, A.

2015-12-01

We present detailed geologic evidence linking changes over time in Philippine Sea plate (PHS) motion and intracontinental deformation in central and southwest (SW) Japan during the Pliocene and after. In the early Pliocene, subduction of the PHS plate under SW Japan restarted in a northerly direction after period of deceleration or cessation. Later, motion changed to a more westerly direction. Corresponding geological changes found in the overriding plate include unconformities in the forearc basins, changes in slip sense on faults, depocenter migration, re-organization of drainage systems and volcanism. Quaternary intraplate deformation is prominent north of the Median Tectonic Line (MTL) inactive segment, above a shallow flat slab. In contrast, less Quaternary tectonic activity is found north of the MTL active segment which lies over a steadily-slipping portion of the subducting slab that behaves as a less-deformed rigid block. Depocenters and active thrusting have migrated north/northwestward over the past 5 My above the shallow flat slab segment of the PHS. We reconstructed the Plio-Pleistocene migration history using Neogene stratigraphy and shallow seismic reflection profiles. We see shallow PHS slab contact with the lower continental crust in our deep seismic reflection profiles, which may explain its enhanced downward drag of the overriding plate and synchronous strong compression in the crust. We find evidence of more westerly PHS plate subduction since the middle Pleistocene in (1) unconformities in the Kumano forearc basin deposits in SW Japan, (2) drastic stream captures in Shikoku, and (3) concordant changes in fault slip sense from thrust to dextral slip along the MTL. Oblique subduction could have induced stronger horizontal stress in the overriding plate above the shallow flat slab which could account for the increasing geologic slip rate observed on active structures. During four repetitions of megathrust earthquake sequences since the 17th century

Early response of plant cell to carbon deprivation: in vivo 31P-NMR spectroscopy shows a quasi-instantaneous disruption on cytosolic sugars, phosphorylated intermediates of energy metabolism, phosphate partitioning, and intracellular pHs.

Science.gov (United States)

Gout, Elisabeth; Bligny, Richard; Douce, Roland; Boisson, Anne-Marie; Rivasseau, Corinne

2011-01-01

• In plant cells, sugar starvation triggers a cascade of effects at the scale of 1-2 days. However, very early metabolic response has not yet been investigated. • Soluble phosphorus (P) compounds and intracellular pHs were analysed each 2.5 min intervals in heterotrophic sycamore (Acer pseudoplatanus) cells using in vivo phosphorus nuclear magnetic resonance ((31)P-NMR). • Upon external-sugar withdrawal, the glucose 6-P concentration dropped in the cytosol, but not in plastids. The released inorganic phosphate (Pi) accumulated transiently in the cytosol before influx into the vacuole; nucleotide triphosphate concentration doubled, intracellular pH increased and cell respiration decreased. It was deduced that the cytosolic free-sugar concentration was low, corresponding to only 0.5 mM sucrose in sugar-supplied cells. • The release of sugar from the vacuole and from plastids is insufficient to fully sustain the cell metabolism during starvation, particularly in the very short term. Similarly to Pi-starvation, the cell's first response to sugar starvation occurs in the cytosol and is of a metabolic nature. Unlike the cytoplasm, cytosolic homeostasis is not maintained during starvation. The important metabolic changes following cytosolic sugar exhaustion deliver early endogenous signals that may contribute to trigger rescue metabolism. © The Authors (2010). Journal compilation © New Phytologist Trust (2010).

Vibration of a string against multiple spring-mass-damper stoppers

Science.gov (United States)

Shin, Ji-Hwan; Talib, Ezdiani; Kwak, Moon K.

2018-02-01

When a building sways due to strong wind or an earthquake, the elevator rope can undergo resonance, resulting in collision with the hoist-way wall. In this study, a hard stopper and a soft stopper comprised of a spring-mass-damper system installed along the hoist-way wall were considered to prevent the string from undergoing excessive vibrations. The collision of the string with multiple hard stoppers and multiple spring-mass-damper stoppers was investigated using an analytical method. The result revealed new formulas and computational algorithms that are suitable for simulating the vibration of the string against multiple stoppers. The numerical results show that the spring-mass-damper stopper is more effective in suppressing the vibrations of the string and reducing structural failure. The proposed algorithms were shown to be efficient to simulate the motion of the string against a vibration stopper.

Electromechanical three-axis development for remote handling in the Hot Experimental Facility

International Nuclear Information System (INIS)

Garin, J.; Bolfing, B.J.; Satterlee, P.E.; Babcock, S.M.

1981-01-01

A three-axis closed-loop position control system has been designed and installed on an overhead bridge, carriage, tube hoist for automotive positioning of manipulation at a remotely maintained work site. The system provides accurate (within 3 min) and repeatable three-axis positioning of the manipulator. The position control system has been interfaced to a supervisory minicomputer system that provides teach-playback capability of manipulator positioning and color graphic display of the three-axis system position

Development of plasma-treated polypropylene nonwoven-based composites for high-performance lithium-ion battery separators

International Nuclear Information System (INIS)

Li, Xiaofei; He, Jinlin; Wu, Dazhao; Zhang, Mingzu; Meng, Juwen; Ni, Peihong

2015-01-01

Graphical abstract: A composite separator based on plasma-treated fluorinated polypropylene (PP) nonwoven, poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) and SiO 2 nanoparticles exhibiting enhanced thermal stability, ionic conductivity and electrochemical properties. Display Omitted -- Highlights: •Fluorinated segments are introduced on the surface of PP nonwoven through plasma treatment. •The obtained composite separators exhibit better physical and electrochemical properties. •The capacity of half-cell with composite separator keeps above 150 mA h g −1 after 100 charge–discharge cycles. -- Abstract: Separators have drawn substantial attention because of their important role in achieving the safety and good electrochemical performance of lithium-ion batteries. In this study, we report a new type of composite membrane prepared by a combination of fluorinated polypropylene (PP) nonwoven fabric, poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) and SiO 2 nanoparticles. 2, 2, 3, 3, 4, 4, 5, 5-Octafluoropentyl methacrylate (OFPMA) is first grafted on the surface of PP nonwoven by plasma treatment to improve the nonwoven’s adhesion with PVdF-HFP. Two kinds of composite separators have been prepared by using the different PP nonwovens together with PVdF-HFP and SiO 2 nanoparticles. They were separately designated as PHS for commercially raw PP nonwoven system and PHS-n for OFPMA-modified PP nonwoven systems (n means plasma treatment time). The morphology, electrolyte uptake, ionic conductivity and electrochemical properties of the composite separators have been analyzed by scanning electron microscope (SEM) analysis, impedance measurement, charge-discharge cycle and C-rate tests, respectively. The results indicate that PHS-10 composite separator using the modified PP nonwoven treated by plasma for 10 min exhibits much better properties than PHS separator, including an improved mechanical property, thermal stability, electrolyte uptake

Studies of an application of mobile communication system to the private telecommunication network. Part 2. Trend of mobile communication systems and application to power utility; Idotai tsushin system no denryoku tsushinmo eno tekiyo. 2. Idotai tsushin system no genjo to denki jigyo eno tekiyo

Energy Technology Data Exchange (ETDEWEB)

Iwasaki, H. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1997-06-01

This paper presents future prospects on development of different mobile communication systems operated by public communications operators, and discusses their application to power utilities. For automobile and cellular telephones, discussions are being made on the code division multiple access (CDMA) system which multiplexes and transmits information by using tally codes. Influence of noise decreases, and so does the need of retransmission due to code errors. Higher speed transmission than conventional systems may be expected. The system can be utilized for transmitting still images, such as for status of construction being carried out by power utility companies. For PHS, a discussion will start on 32 to 64-kbps transmission in fiscal 1997. By using the system together with an image compression technology, the system may be expected of utilization as a moving image transmission method for supporting site works by utility companies. The low and medium orbit satellite communications whose use is scheduled to start shortly can be utilized as construction and emergency disaster communication networks for mountainous areas and islands. Movements around the frequency band utilization and communication systems of IMT-2000 are becoming more complex. The Japanese proposal plans transmission of moving images, whereas more diverse utilization can be expected, such as for voice, data and images, in areas where no ground communication facilities are available for electric power operations. 16 refs., 4 figs., 3 tabs.

Optimization of mining design of Hongwei uranium mine

International Nuclear Information System (INIS)

Wu Sanmao; Yuan Baixiang

2012-01-01

Combined with the mining conditions of Hongwei uranium mine, optimization schemes for hoisting cage, mine drainge,ore transport, mine wastewater treatment, power-supply system,etc are put forward in the mining design of the mine. Optimized effects are analyzed from the aspects of technique, economy, and energy saving and reducing emissions. (authors)

Disruptive Innovation Can Prevent the Next Pandemic.

Science.gov (United States)

Shaikh, Affan T; Ferland, Lisa; Hood-Cree, Robert; Shaffer, Loren; McNabb, Scott J N

2015-01-01

Public health surveillance (PHS) is at a tipping point, where the application of novel processes, technologies, and tools promise to vastly improve efficiency and effectiveness. Yet twentieth century, entrenched ideology and lack of training results in slow uptake and resistance to change. The term disruptive innovation - used to describe advances in technology and processes that change existing markets - is useful to describe the transformation of PHS. Past disruptive innovations used in PHS, such as distance learning, the smart phone, and field-based laboratory testing have outpaced older services, practices, and technologies used in the traditional classroom, governmental offices, and personal communication, respectively. Arguably, the greatest of these is the Internet - an infrastructural innovation that continues to enable exponential benefits in seemingly limitless ways. Considering the Global Health Security Agenda and facing emerging and reemerging infectious disease threats, evolving environmental and behavioral risks, and ever changing epidemiologic trends, PHS must transform. Embracing disruptive innovation in the structures and processes of PHS can be unpredictable. However, it is necessary to strengthen and unlock the potential to prevent, detect, and respond.

Status of disposal techniques for spent fuel in Germany: Results of demonstration tests for direct disposal

International Nuclear Information System (INIS)

Engelmann, H.J.; Filbert, W.

1993-01-01

According to the Atomic Energy Act (1985) the Federal Government is responsible for establishing facilities to indemnify and dispose radioactive waste. According to Art. 9b of the Atomic Energy Act (1986) the construction and operation of such a repository requires approval of a plan. According to safety criteria applicable for disposing radioactive waste in mines, construction and operation of repository mines require application of acknowledged rules of technology, laws, ordinances and other regulations to protect operating staff and population from radiation damages. Shaft hoisting equipment for the transportation of radioactive waste in a repository mine must satisfy normal operational tasks and meet special safety-requirements. Its failure may result in danger for persons, release of radioactive substances into the plant and environment. That means, shaft hoisting equipment must be designed to satisfy the necessary safety requirements and be state of the art of science and technology. The aim of these demonstration tests is verification of technical feasibility of a shaft hoisting equipment with a payload of 85 t, underground for drift disposal of POLLUX-casks, and essential machine and mine-technical systems and components. The demonstration also includes safe radiation protection during transport and disposal operations. Investigations assume that radioactive waste is transported in containers that satisfy transport requirements for dangerous goods and have a type-B-certificate

Development of polymeric nanoparticles showing tuneable pH-responsive precipitation

Energy Technology Data Exchange (ETDEWEB)

Vakurov, Alexander, E-mail: a.v.vakourov@bmb.leeds.ac.uk; Pchelintsev, Nikolay A., E-mail: n.a.pchelintsev@googlemail.com; Gibson, Tim, E-mail: timdgibson@merchab.fsnet.co.uk; Millner, Paul, E-mail: p.a.millner@leeds.ac.uk [Research Institute of Membrane and Systems Biology, University of Leeds (United Kingdom)

2012-12-15

A reverse micellar system comprising dioctyl-sulfosuccinate (AOT)/toluene was used as a template for polymerization of acrylamide/bisacrylamide-based functionalized polymeric nanoparticles. Such nanoparticles were typically sized between 20 and 90 nm and could be synthesized with a wide range of functional groups according to the monomers added to the polymerization mixture. Carboxy nanoparticles with acrylic acid as the functional monomer were synthesized in the reported work. The carboxy nanoparticles were pH sensitive and precipitated at pHs below 4. Modification of carboxy-functionalized polymeric nanoparticles with polyetheleneimine (PEI) resulted in the fabrication of a series of pH-responsive nanoparticles which could precipitate at different pHs and ionic strengths according to the PEI/carboxy ratio in the system. Both non-covalent PEI-nanoparticles conjugates and nanoparticles with covalently linked PEI behaved in this way.

Development of polymeric nanoparticles showing tuneable pH-responsive precipitation

International Nuclear Information System (INIS)

Vakurov, Alexander; Pchelintsev, Nikolay A.; Gibson, Tim; Millner, Paul

2012-01-01

A reverse micellar system comprising dioctyl-sulfosuccinate (AOT)/toluene was used as a template for polymerization of acrylamide/bisacrylamide-based functionalized polymeric nanoparticles. Such nanoparticles were typically sized between 20 and 90 nm and could be synthesized with a wide range of functional groups according to the monomers added to the polymerization mixture. Carboxy nanoparticles with acrylic acid as the functional monomer were synthesized in the reported work. The carboxy nanoparticles were pH sensitive and precipitated at pHs below 4. Modification of carboxy-functionalized polymeric nanoparticles with polyetheleneimine (PEI) resulted in the fabrication of a series of pH-responsive nanoparticles which could precipitate at different pHs and ionic strengths according to the PEI/carboxy ratio in the system. Both non-covalent PEI-nanoparticles conjugates and nanoparticles with covalently linked PEI behaved in this way.

TH-CD-207B-06: Swank Factor of Segmented Scintillators in Multi-Slice CT Detectors: Pulse Height Spectra and Light Escape

Energy Technology Data Exchange (ETDEWEB)

Howansky, A; Peng, B; Lubinsky, A; Zhao, W [Stony Brook University, Stony Brook, NY (United States)

2016-06-15

Purpose: Pulse height spectra (PHS) have been used to determine the Swank factor of a scintillator by measuring fluctuations in its light output per x-ray interaction. The Swank factor and x-ray quantum efficiency of a scintillator define the upper limit to its imaging performance, i.e. DQE(0). The Swank factor below the K-edge is dominated by optical properties, i.e. variations in light escape efficiency from different depths of interaction, denoted e(z). These variations can be optimized to improve tradeoffs in x-ray absorption, light yield, and spatial resolution. This work develops a quantitative model for interpreting measured PHS, and estimating e(z) on an absolute scale. The method is used to investigate segmented ceramic GOS scintillators used in multi-slice CT detectors. Methods: PHS of a ceramic GOS plate (1 mm thickness) and segmented GOS array (1.4 mm thick) were measured at 46 keV. Signal and noise propagation through x-ray conversion gain, light escape, detection by a photomultiplier tube and dynode amplification were modeled using a cascade of stochastic gain stages. PHS were calculated with these expressions and compared to measurements. Light escape parameters were varied until modeled PHS agreed with measurements. The resulting estimates of e(z) were used to calculate PHS without measurement noise to determine the inherent Swank factor. Results: The variation in e(z) was 67.2–89.7% in the plate and 40.2–70.8% in the segmented sample, corresponding to conversion gains of 28.6–38.1 keV{sup −1} and 17.1–30.1 keV{sup −1}, respectively. The inherent Swank factors of the plate and segmented sample were 0.99 and 0.95, respectively. Conclusion: The high light escape efficiency in the ceramic GOS samples yields high Swank factors and DQE(0) in CT applications. The PHS model allows the intrinsic optical properties of scintillators to be deduced from PHS measurements, thus it provides new insights for evaluating the imaging performance of

Partial HELLP Syndrome: maternal and perinatal outcome

Directory of Open Access Journals (Sweden)

Joelcio Francisco Abbade

Full Text Available CONTEXT: HELLP syndrome is a severe complication of pregnancy characterized by hemolysis, elevated liver enzymes and low platelet count. Some pregnant women develop just one or two of the characteristics of this syndrome, which is termed Partial HELLP Syndrome (PHS. OBJECTIVE: The objective of this study was to evaluate the repercussions on maternal and perinatal outcomes among women that developed PHS and to compare these women with those whose gestational hypertension or preeclampsia did not show alterations for HELLP syndrome in laboratory tests. DESIGN: Observational, retrospective and analytical study. SETTING: Maternity Department of Hospital das Clínicas, Faculdade de Medicina de Botucatu, Universidade Estadual Paulista, Botucatu, São Paulo, Brazil. SAMPLE: Pregnant or post-delivery women who had a blood pressure elevation that was first detected after mid-pregnancy, with or without proteinuria, between January 1990 and December 1995. MAIN MEASUREMENTS: Analysis was made of maternal age, race, parity, hypertension classification, gestational age at the PHS diagnosis, alterations in laboratory tests for HELLP syndrome, time elapsed to discharge from hospital, maternal complications, mode of delivery, incidence of preterm birth, intrauterine growth restriction, stillborn and neonatal death. RESULTS: Three hundred and eighteen women were selected; forty-one women (12.9% had PHS and 277 of them (87.1% did not develop any of the alterations of the HELLP syndrome diagnosis. Preeclampsia was a more frequent type of hypertension in the PHS group than in the hypertension group. None of the women with isolated chronic hypertension developed PHS. The rate of cesarean delivery, eclampsia, and preterm delivery was significantly greater in the PHS group than in the hypertension group. CONCLUSION: We observed that aggressive procedures had been adopted for patients with PHS. These resulted in immediate interruption of pregnancy, with elevated cesarean

Practical application of a field work information support system for one-stop service; One stoop service wo mezashita genchi sagyo joho shien system no jitsuyoka kenkyu

Energy Technology Data Exchange (ETDEWEB)

Ishikawa, M. [Kansai Electric Power Co. Inc., Osaka (Japan)

1998-04-10

This paper reports the current research result of the field work information support system in a one-stop service system. The work arrangement in the branch office of an electric company is how to assign the service operator efficiently and accurately for the transfer to the customer. This problem is grasped as a traveling salesman problem (TSP) of `make the round of `n` works by `m` persons for processing and return to the branch office with the branch office as a start point`. The system in which the day`s schedule of each operator can be automatically created by entering only the work schedule (including limitation conditions (difficulty degree of work contents or time appointment) and skill management information of each work) was investigated. The compatibility and evaluation of each traveling route search method were carried out. As a result, the genetic algorithm is judged to be fully practical. The communication information for field work could be retrieved in real time using PHS. This system can also be applied to the maintenance or consulting including a disaster or accident as well as general work. 4 figs., 1 tab.

Fuel transfer manipulator for liquid metal nuclear reactors

International Nuclear Information System (INIS)

Sturges, R.H.

1983-01-01

A manipulator for transferring fuel assemblies between inclined fuel chutes of a liquid metal nuclear reactor installation. Hoisting means are mounted on a mount supported by beams pivotably attached by pins to the mount and to the floor in such a manner that pivoting of the beams causes movement and tilting of a hoist tube between positions of alignment with the inclined chutes. (author)

75 FR 77641 - Findings of Research Misconduct

Science.gov (United States)

2010-12-13

... significance, used to calculate repression ratios and RNA decay rates. Dr. Mungekar also claimed to have... proposed or that uses him in any capacity on PHS-supported research, or that submits a report of PHS-funded...

Thermal Equilibrium Dynamic Control Based on DPWM Dual-Mode Modulation of High Power NPC Three-Level Inverter

Directory of Open Access Journals (Sweden)

Shi-Zhou Xu

2016-01-01

Full Text Available In some special applications of NPC three-level inverters, such as mine hoist, there exist special conditions of overloading during the whole hoisting process and large overload in starting stage, during which the power-loss calculation of power devices and thermal control are important factors affecting the thermal stability of inverters. The principles of SVPWM and DPWM were described in this paper firstly, based on which the dynamic power losses of the two modulations of hoist in single period were calculated. Secondly, a thermal equilibrium dynamic control based on DPMW dual-mode modulation was proposed, which can switch the modulation dynamically according to the change of dynamic power loss to realize dynamic control of power loss and thermal equilibrium of inverter. Finally, simulation and experiment prove the effectiveness of the proposed strategy.

2007 Joint Service Power Expo: Power and Energy Independence for Warfighters

Science.gov (United States)

2007-04-26

longitudinal, and lateral directions: - 55-ton overhead chain hoist - Remotely controlled 60-ton hydraulic load application system - Airbag inflation system...Step Apply & Load Dump Inductive Load Start Short Circuit Thermal Limits Step Load Steady State Thermal Loading 0 20 40 60 80 100 120 140 0 1.000...15 ton payload primary and secondary roads • MTVR Based Variants – Cargo, Dump Truck, Wrecker, HIMARS Re-Supply Vehicle, Tractor, LHS (load

The pedagogical value of a student-run community-based experiential learning project: The Yong Loo Lin School of Medicine Public Health Screening.

Science.gov (United States)

Wee, Liang En; Yeo, Wei Xin; Tay, Clifton M; Lee, Jeannette J M; Koh, Gerald C H

2010-09-01

We assessed the pedagogical value of a student-led community-based experiential learning project called the Public Health Screening (PHS) run by medical and nursing students of the National University of Singapore's Yong Loo Lin School of Medicine (NUS YLLSoM). We conducted a cross-sectional study using a self-administered anonymised questionnaire on medical and nursing students who participated in PHS using the Fund for the Improvement of Postsecondary Education (FIPSE) Survey Instrument. Participants also gave an overall score for their learning experience at the PHS. The participation rate was 93.1% (576/619) for medical students and 100% (37/37) for nursing students. All participants gave the PHS learning experience a high rating (median = 8 out of maximum of 10, inter-quartile range, 7 to 9). A majority of participants felt that PHS had helped them to improve across all domains surveyed. For medical students, those in preclinical years and females were independently more likely to feel that PHS had helped them to improve in communication skills, teamwork, ability to identify social issues, taking action, and gaining and applying their knowledge than those in clinical years and males. Improved ability to interact with patients (β=1.64, 95%CI, 1.01-2.27), appreciation of challenges to healthcare faced by Singaporeans from lower income groups (β=0.93, 95%CI, 0.49-1.37), thinking of others (β=0.70, 95%CI, 0.04-1.37) and tolerance of different people (β =0.63, 95%CI, 0.17-1.10) were strongly associated with the overall rating score. PHS was a positive learning experience in a wide range of domains for all students involved. This suggests that student-organised community-based experiential learning projects have potential educational value for both medical and nursing students.

Interaction of hyperalgesia and sensory loss in complex regional pain syndrome type I (CRPS I.

Directory of Open Access Journals (Sweden)

Volker Huge

Full Text Available BACKGROUND: Sensory abnormalities are a key feature of Complex Regional Pain Syndrome (CRPS. In order to characterise these changes in patients suffering from acute or chronic CRPS I, we used Quantitative Sensory Testing (QST in comparison to an age and gender matched control group. METHODS: 61 patients presenting with CRPS I of the upper extremity and 56 healthy subjects were prospectively assessed using QST. The patients' warm and cold detection thresholds (WDT; CDT, the heat and cold pain thresholds (HPT; CPT and the occurrence of paradoxical heat sensation (PHS were observed. RESULTS: In acute CRPS I, patients showed warm and cold hyperalgesia, indicated by significant changes in HPT and CPT. WDT and CDT were significantly increased as well, indicating warm and cold hypoaesthesia. In chronic CRPS, thermal hyperalgesia declined, but CDT as well as WDT further deteriorated. Solely patients with acute CRPS displayed PHS. To a minor degree, all QST changes were also present on the contralateral limb. CONCLUSIONS: We propose three pathomechanisms of CRPS I, which follow a distinct time course: Thermal hyperalgesia, observed in acute CRPS, indicates an ongoing aseptic peripheral inflammation. Thermal hypoaesthesia, as detected in acute and chronic CRPS, signals a degeneration of A-delta and C-fibres, which further deteriorates in chronic CRPS. PHS in acute CRPS I indicates that both inflammation and degeneration are present, whilst in chronic CRPS I, the pathomechanism of degeneration dominates, signalled by the absence of PHS. The contralateral changes observed strongly suggest the involvement of the central nervous system.

WIPP conceptual design report. Addendum A. Design calculations for Waste Isolation Pilot Plant (WIPP)

International Nuclear Information System (INIS)

1977-04-01

The design calculations for the Waste Isolation Pilot Plant (WIPP) are presented. The following categories are discussed: general nuclear calculations; radwaste calculations; structural calculations; mechanical calculations; civil calculations; electrical calculations; TRU waste surface facility time and motion analysis; shaft sinking procedures; hoist time and motion studies; mining system analysis; mine ventilation calculations; mine structural analysis; and miscellaneous underground calculations

The Work of US Public Health Service Officers in Puerto Rico, 1898-1919.

Science.gov (United States)

Rigau-Pérez, Jose G

2017-09-01

The history of the US Public Health Service (PHS) is usually presented in terms of diseases or discoveries; this article examines twenty years' activity in one location. When the United States invaded Puerto Rico in 1898, the Marine Hospital Service (now PHS) took responsibility for foreign quarantine, inspection of immigrants, and medical care for merchant seamen. Its officers evaluated the sanitary conditions of port cities, helped reorganize local disease surveillance and control, and investigated endemic diseases (e.g., hookworm-related anemia) and epidemics (e.g., bubonic plague). After World War I and pandemic influenza, and the greater self-government allowed Puerto Rico by Congress in 1917, PHS officers withdrew from routine local sanitary actions. A narrow geographic focus (Puerto Rico), to examine PHS activity over time (1898 to 1919) provides a richer picture of the agency's impact, and reveals how the sum of disease control activities affected the development of an area's health status and institutions. The duties and, importantly, the personal initiatives of PHS officers in Puerto Rico, such as WW King, produced lasting impact on scientific institutions and administrative, professional, and health care practices.

Disruptive Innovation Can Prevent the Next Pandemic

Directory of Open Access Journals (Sweden)

Affan eShaikh

2015-09-01

Full Text Available Public health surveillance (PHS is at a tipping point, where the application of novel processes, technologies, and tools promise to vastly improve efficiency and effectiveness. Yet 20th-century, entrenched ideology and lack of training results in slow uptake and resistance to change. The term disruptive innovation – used to describe advances in technology and processes that change existing markets, is useful to describe the transformation of PHS. Past disruptive innovations used in PHS, such as distance learning, the smart phone, and field-based laboratory testing have outpaced older services, practices, and technologies used in the traditional classroom, governmental offices, and personal communication, respectively. Arguably, the greatest of these is the Internet – an infrastructural innovation that continues to enable exponential benefits in seemingly limitless ways. Considering the Global Health Security Agenda and facing emerging and reemerging infectious disease threats, evolving environmental and behavioral risks, and ever changing epidemiologic trends, PHS must transform. Embracing disruptive innovation in the structures and processes of PHS can be unpredictable. However it is necessary to strengthen and unlock the potential to prevent, detect, and respond.

[A rare cause of oral pain: The pterygoid hamulus syndrome].

Science.gov (United States)

Bandini, M; Corre, P; Huet, P; Khonsari, R H

2015-12-01

Pterygoid hamulus syndrome (PHS) is a rare cause of orofacial and oropharyngeal pain. PHS can be associated with a hamulus hypertrophy or with a bursitis of the palatosalpingeus but it has not always an anatomic cause. A 36-year-old woman was seen for a constant posterior palatal pain spreading towards oropharynx, increasing during swallowing and lasting for more than 6 months. Physical examination showed an erythema of the soft palate, medially to the hamulus. Hamulus palpation was painful and revealed hamulus hypertrophia on both sides. A bilateral PHS was evocated. This observation is typical of a PHS. We propose a review of the literature of this little-known syndrome. Treatment is initially conservative (corticosteroids) but surgery can be proposed in case of morphological anomalies of the hamulus. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Application of Long Distance Conveyance (LDC) of Dredged Sediments to Louisiana Coastal Restoration

Science.gov (United States)

2011-01-01

generally use some type of bucket for digging the sediment, then hoist or boom the load to the surface. Most common hydraulic methods use a centrifugal...sediment. The loaded bucket is hoisted to the surface and side dumped into a transportation unit, or into the disposal site. Transportation units are...Conveyance (LDC) of Dredged Sediments to Louisiana Coastal Restoration Timothy Welp Coastal and Hydraulics Laboratory U.S. Army Engineer Research

Molecular and clinical analyses of Greig cephalopolysyndactyly and Pallister-Hall syndromes: Robust phenotype prediction from the type and position of GLI3 mutations

NARCIS (Netherlands)

Johnston, Jennifer J.; Olivos-Glander, Isabelle; Killoran, Christina; Elson, Emma; Turner, Joyce T.; Peters, Kathryn F.; Abbott, Margaret H.; Aughton, David J.; Aylsworth, Arthur S.; Bamshad, Michael J.; Booth, Carol; Curry, Cynthia J.; David, Albert; Dinulos, Mary Beth; Flannery, David B.; Fox, Michelle A.; Graham, John M.; Grange, Dorothy K.; Guttmacher, Alan E.; Hannibal, Mark C.; Henn, Wolfram; Hennekam, Raoul C. M.; Holmes, Lewis B.; Hoyme, H. Eugene; Leppig, Kathleen A.; Lin, Angela E.; Macleod, Patrick; Manchester, David K.; Marcelis, Carlo; Mazzanti, Laura; McCann, Emma; McDonald, Marie T.; Mendelsohn, Nancy J.; Moeschler, John B.; Moghaddam, Billur; Neri, Giovanni; Newbury-Ecob, Ruth; Pagon, Roberta A.; Phillips, John A.; Sadler, Laurie S.; Stoler, Joan M.; Tilstra, David; Walsh Vockley, Catherine M.; Zackai, Elaine H.; Zadeh, Touran M.; Brueton, Louise; Black, Graeme Charles M.; Biesecker, Leslie G.

2005-01-01

Mutations in the GLI3 zinc-finger transcription factor gene cause Greig cephalopolysyndactyly syndrome (GCPS) and Pallister-Hall syndrome (PHS), which are variable but distinct clinical entities. We hypothesized that GLI3 mutations that predict a truncated functional repressor protein cause PHS and

Experimental and numerical study on coupled motion responses of a floating crane vessel and a lifted subsea manifold in deep water

Directory of Open Access Journals (Sweden)

B.W. Nam

2017-09-01

Full Text Available The floating crane vessel in waves gives rise to the motion of the lifted object which is connected to the hoisting wire. The dynamic tension induced by the lifted object also affects the motion responses of the floating crane vessel in return. In this study, coupled motion responses of a floating crane vessel and a lifted subsea manifold during deep-water installation operations were investigated by both experiments and numerical calculations. A series of model tests for the deep-water lifting operation were performed at Ocean Engineering Basin of KRISO. For the model test, the vessel with a crane control system and a typical subsea manifold were examined. To validate the experimental results, a frequency-domain motion analysis method is applied. The coupled motion equations of the crane vessel and the lifted object are solved in the frequency domain with an additional linear stiffness matrix due to the hoisting wire. The hydrodynamic coefficients of the lifted object, which is a significant factor to affect the coupled dynamics, are estimated based on the perforation value of the structure and the CFD results. The discussions were made on three main points. First, the motion characteristics of the lifted object as well as the crane vessel were studied by comparing the calculation results. Second, the dynamic tension of the hoisting wire were evaluated under the various wave conditions. Final discussion was made on the effect of passive heave compensator on the motion and tension responses.

NASA safety standard for lifting devices and equipment

Science.gov (United States)

1990-09-01

NASA's minimum safety requirements are established for the design, testing, inspection, maintenance, certification, and use of overhead and gantry cranes (including top running monorail, underhung, and jib cranes), mobile cranes, derrick hoists, and special hoist supported personnel lifting devices (these do not include elevators, ground supported personnel lifts, or powered platforms). Minimum requirements are also addressed for the testing, inspection, and use of Hydra-sets, hooks, and slings. Safety standards are thoroughly detailed.

A wearable, mobile phone-based respiration monitoring system for sleep apnea syndrome detection.

Science.gov (United States)

Ishida, Ryoichi; Yonezawa, Yoshiharu; Maki, Hiromichi; Ogawa, Hidekuni; Ninomiya, Ishio; Sada, Kouji; Hamada, Shingo; Hahn, Allen W; Caldwell, W Morton

2005-01-01

A new wearable respiration monitoring system has been developed for non-invasive detection of sleep apnea syndrome. The system, which is attached to a shirt, consists of a piezoelectric sensor, a low-power 8-bit single chip microcontroller, EEPROM and a 2.4 GHz low-power transmitting mobile phone (PHS). The piezoelectric sensor, whose electrical polarization voltage is produced by body movements, is installed inside the shirt and closely contacts the patient's chest. The low frequency components of body movements recorded by the sensor are mainly generated by respiration. The microcontroller sequentially stores the movement signal to the EEPROM for 5 minutes and detects, by time-frequency analysis, whether the patient has breathed during that time. When the patient is apneic for 10 sseconds, the microcontroller sends the recorded respiration waveform during and one minute before and after the apnea directly to the hospital server computer via the mobile phone. The server computer then creates apnea "filings" automatically for every patient. The system can be used at home and be self-applied by patients. Moreover, the system does not require any extra equipment such as a personal computer, PDA, or Internet connection.

Pulmonary Hypertension Syndrome in Chicken: Peeking Under QTL Peaks

NARCIS (Netherlands)

Rabie, T.

2004-01-01

Pulmonary hypertension syndrome (PHS) is characterized a cascade of events resulting in cardiac anomalies including an enlarged heart, right ventricular hypertrophy, variable liver changes, and accumulation of fluid in the abdominal cavity (ascites). PHS is not a disease; it is a condition in which

United States Coast Guard 2010 Posture Statement: With 2011 Budget in Brief

Science.gov (United States)

2010-02-01

ENVIRONMENTAL PROTECTION Stop unauthorized ocean dumping and regulate the discharge of oil, hazardous substances, and other shipboard wastes...Sheriff’s Department during a joint agency hoist training exercise Oct. 14, 2009, on Lake Pontchartrain near New Orleans. During the exercise, the...of the go-to people for all engineering issues she is extremely knowledgeable about the mechanical, electrical, and hydraulic systems aboard

14 CFR 1232.103 - Definitions.

Science.gov (United States)

2010-01-01

... school accredited by the American Veterinary Medical Association's Council on Education or has a... NASA ACTIVITIES § 1232.103 Definitions. The following definitions of terms comply with the PHS Policy... this rule and PHS Policy. (d) Authorized NASA Official is the Director, Life Sciences Division, NASA...

High-speed elevator ELEXCIA{sub TM}; Kosoku elevator EXEXCIA{sub TM}

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

New series high-speed elevator ELEXCIA{sub TM} was put on sale in November 1999. In ELEXCIA{sub TM}, the car and door as well as the newly developed hoist and control device were improved in compactness, lightweight, silence, and riding quality. The major features of the high-speed elevator are as follows: (1) The use of an outer rotor-type permanent magnetic synchronous motor (PMSM) in a hoist reduced the mass of the hoist (by about 40% as compared with the conventional one). (2) The use of a double-structured car side plate and floor enabled a silent car. (3) Improved door performance. The introduction of a PMSM motor and latest inverter control processor door into a door gave smoother movement than the previous one. (4) Brightly easy-to-view and white LED-type operation buttons are used in the hoistway door and car. (translated by NEDO)

Unraveling Key Metabolomic Alterations in Wheat Embryos Derived from Freshly Harvested and Water-Imbibed Seeds of Two Wheat Cultivars with Contrasting Dormancy Status

Directory of Open Access Journals (Sweden)

Aayudh Das

2017-07-01

Full Text Available Untimely rains in wheat fields during harvest season can cause pre-harvest sprouting (PHS, which deteriorates the yield and quality of wheat crop. Metabolic homeostasis of the embryo plays a role in seed dormancy, determining the status of the maturing grains either as dormant (PHS-tolerant or non-dormant (PHS-susceptible. Very little is known for direct measurements of global metabolites in embryonic tissues of dormant and non-dormant wheat seeds. In this study, physiologically matured and freshly harvested wheat seeds of PHS-tolerant (cv. Sukang, dormant and PHS-susceptible (cv. Baegjoong, non-dormant cultivars were water-imbibed, and the isolated embryos were subjected to high-throughput, global non-targeted metabolomic profiling. A careful comparison of identified metabolites between Sukang and Baegjoong embryos at 0 and 48 h after imbibition revealed that several key metabolic pathways [such as: lipids, fatty acids, oxalate, hormones, the raffinose family of oligosaccharides (RFOs, and amino acids] and phytochemicals were differentially regulated between dormant and non-dormant varieties. Most of the membrane lipids were highly reduced in Baegjoong compared to Sukang, which indicates that the cell membrane instability in response to imbibition could also be a key factor in non-dormant wheat varieties for their untimely germination. This study revealed that several key marker metabolites (e.g., RFOs: glucose, fructose, maltose, and verbascose, were highly expressed in Baegjoong after imbibition. Furthermore, the data showed that the key secondary metabolites and phytochemicals (vitexin, chrysoeriol, ferulate, salidroside and gentisic acid, with known antioxidant properties, were comparatively low at basal levels in PHS-susceptible, non-dormant cultivar, Baegjoong. In conclusion, the results of this investigation revealed that after imbibition the metabolic homeostasis of dormant wheat is significantly less affected compared to non

2007 Army Modernization Plan

Science.gov (United States)

2007-03-01

Additional confi gurations include two NATO li ers with patients and one medical a endant. The aircra has a hoist for use in emergency...including airframes, wiring bundles and hydraulic systems on the remanufactured CH-47Fs are new. Program Status. The Army received its fi rst fully...Expansible Van and the 10T Dump Truck. Another new variant, the FMTV-Load Handling System, is expected to be fi elded in late-2007, initially to medical

Presence of selected priority and personal care substances in an onsite bathroom greywater treatment facility

DEFF Research Database (Denmark)

Eriksson, Eva; Donner, E.; Ledin, Anna

2010-01-01

-out Priority/Priority Hazardous Substances (PS/PHS) is growing, and it is vital to know their sources and flows in order to generate sustainable emission control strategies. The main objective of this study was to quantify the concentrations and loads of PS/PHS and personal care substances in bathroom...

Operator control systems and methods for swing-free gantry-style cranes

Science.gov (United States)

Feddema, John T.; Petterson, Ben J.; Robinett, III, Rush D.

1998-01-01

A system and method for eliminating swing motions in gantry-style cranes while subject to operator control is presented. The present invention comprises an infinite impulse response ("IIR") filter and a proportional-integral ("PI") feedback controller (50). The IIR filter receives input signals (46) (commanded velocity or acceleration) from an operator input device (45) and transforms them into output signals (47) in such a fashion that the resulting motion is swing free (i.e., end-point swinging prevented). The parameters of the IIR filter are updated in real time using measurements from a hoist cable length encoder (25). The PI feedback controller compensates for modeling errors and external disturbances, such as wind or perturbations caused by collision with objects. The PI feedback controller operates on cable swing angle measurements provided by a cable angle sensor (27). The present invention adjusts acceleration and deceleration to eliminate oscillations. An especially important feature of the present invention is that it compensates for variable-length cable motions from multiple cables attached to a suspended payload.

Antioxidant and Sensorial Properties of Polyfloral Honey with Dried Apricots after One Year of Storage

Directory of Open Access Journals (Sweden)

Jelena Vulić

2015-01-01

Full Text Available Total phenol (TPh and flavonoid (TFd contents, antioxidant and sensorial properties of polyfloral (PH, and polyfloral honey after one year of storage (PHs with dried apricots (20, 30, and 40% were evaluated. In comparison to honey, TPh increased 1.86 times for PH40. After storage time, TPh of PH40s increased slightly lower (1.77 times, compared to PHs. TFd slightly increased, approximately 3.23-fold, from PH to PH40, while PHs showed increase of 5.15-fold for PH40s. Antioxidant activity increased with increasing concentration of apricots in honey. EC50OH varied from 3.36 for PH to 2.29 mg/mL for PH40 and from 3.48 for PHs to 2.68 mg/mL for PH40s; EC50DPPH ranged from 30.60 for PH to 14.95 mg/mL for PH40 and from 31.22 for PHs to 17.43 mg/mL for PH40s; RP0.5 ranged from 66.37 for PH to 31.83 mg/mL for PH40 and from 67.99 for PHs to 35.03 mg/mL for PH40s. Statistical analysis suggested that TPh and TFd were associated with antioxidant activity and colour. Sensory parameters, before and after storage, indicated very good sensory qualities. Phenolic composition, antioxidant capacity, and sensory properties were promoted after addition of dried apricots and these parameters stayed improved, since antioxidant compounds present in dried apricots aided in maintenance of honey properties along one year of storage.

MRI findings in the painful hemiplegic shoulder

International Nuclear Information System (INIS)

Tavora, D.G.F.; Gama, R.L.; Bomfim, R.C.; Nakayama, M.; Silva, C.E.P.

2010-01-01

Aim: To evaluate the magnetic resonance imaging (MRI) findings in painful hemiplegic shoulder (PHS) in hemiplegic post-stroke patients. Materials and methods: Patients with hemiplegia following their first cerebrovascular accident who were admitted to the Sarah Network of Hospitals for Rehabilitation were studied. Forty-five patients with pain in the hemiplegic shoulder and 23 post-stroke patients without shoulder pain were investigated. MRI and radiographic findings of the hemiplegic and contralateral asymptomatic shoulders were evaluated. Results: Some MRI findings were more frequent in PHS group, including synovial capsule thickening, synovial capsule enhancement, and enhancement in the rotator cuff interval. Conclusions: Adhesive capsulitis was found to be a possible cause of PHS.

MRI findings in the painful hemiplegic shoulder

Energy Technology Data Exchange (ETDEWEB)

Tavora, D.G.F., E-mail: danielgurgel@sarah.b [Department of Radiology, Sarah Network of Hospitals for Rehabilitation, Fortaleza (Brazil); Gama, R.L.; Bomfim, R.C. [Department of Radiology, Sarah Network of Hospitals for Rehabilitation, Fortaleza (Brazil); Nakayama, M. [Department of Radiology, Federal University of Grande Dourados, Dourados (Brazil); Silva, C.E.P. [Department of Statistics, Sarah Network of Hospitals for Rehabilitation, Fortaleza (Brazil)

2010-10-15

Aim: To evaluate the magnetic resonance imaging (MRI) findings in painful hemiplegic shoulder (PHS) in hemiplegic post-stroke patients. Materials and methods: Patients with hemiplegia following their first cerebrovascular accident who were admitted to the Sarah Network of Hospitals for Rehabilitation were studied. Forty-five patients with pain in the hemiplegic shoulder and 23 post-stroke patients without shoulder pain were investigated. MRI and radiographic findings of the hemiplegic and contralateral asymptomatic shoulders were evaluated. Results: Some MRI findings were more frequent in PHS group, including synovial capsule thickening, synovial capsule enhancement, and enhancement in the rotator cuff interval. Conclusions: Adhesive capsulitis was found to be a possible cause of PHS.

75 FR 19335 - Premium Review Process; Request for Comments Regarding Section 2794 of the Public Health Service Act

Science.gov (United States)

2010-04-14

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Office of the Secretary 45 CFR Parts 146 and 148 Premium Review Process; Request for Comments Regarding Section 2794 of the Public Health Service Act AGENCY..., which added Section 2794 to the Public Health Service Act (the PHS Act). Section 2794 of the PHS Act...

Evolutionary Genomics and Conservation of the Endangered Przewalski’s Horse

DEFF Research Database (Denmark)

Der Sarkissian, Clio; Ermini, Luca; Schubert, Mikkel

2015-01-01

Przewalski’s horses (PHs, Equus ferus ssp. przewalskii) were discovered in the Asian steppes in the 1870s and represent the last remaining true wild horses. PHs became extinct in the wild in the 1960s but survived in captivity, thanks to major conservation efforts. The current population is still...

Making ropes work

Energy Technology Data Exchange (ETDEWEB)

Gower, E. [WRCA (United States)

2006-11-15

The article looks at types of rope for different applications of surface mining ropes. The Wire Rope Corp. of America (WRCA), a leading producer, has over the last three years introduced shovel hoist rope, a new line of dragline ropes and a new drag rope designed for reverse bend fairlead systems. Each of these is discussed in the short article, with results from actual field use.

Electronic Warfare Test and Evaluation (Essai et evaluation en matiere de guerre electronique)

Science.gov (United States)

2012-12-01

temperature measurements in a beam dump , converting it into a calorimeter. T&E OF EA SYSTEMS 3 - 40 RTO-AG-300-V28 Common laboratory and...simulation. Aircraft and other services • Cooling, hydraulics , pressurised air, ground power for aircraft; • Fire suppression, control room, CCTV...instrumentation, two man-rated hoists , a turntable, interconnecting networks, a test control room, presentation rooms, and office space, and a small

Advanced Integrated Multi-sensor Surveillance (AIMS). Mission, Function, Task Analysis

Science.gov (United States)

2007-06-01

flaps, elevators and rudder control surfaces are based on conventional mechanical systems, using dual hydraulic boosters. Trim tabs are provided for... dumping the solid waste overboard it is difficult to determine its source. When an oil slick has been detected, the crew attempts to discover the...NAVCOM advises helicopter of on-scene weather, elevation, flight conditions and salient terrain features which may impact hoisting requirements

Congenital Hypothalamic "Hamartoblastoma" Versus "Hamartoma": Suggestions for Neuropathologic Terminology Emanating From a Mid-gestational Autopsy Case of Pallister-Hall Syndrome.

Science.gov (United States)

Dunham, C; McFadden, D; Dahlgren, L; Butler, B; Hamilton, S; McKinnon, M

2018-01-01

Pallister-Hall syndrome (PHS) is a rare malformative disorder that is due to truncating functional repressor mutations in GLI3. Since the seminal publication in 1980, hypothalamic tumors have been recognized to be a cardinal feature of PHS. In their original description of the neuropathologic features of PHS, Clarren et al. coined the term "hamartoblastoma" to characterize what they deemed to be a dual malformative and neoplastic mass of the hypothalamus. In subsequent published cases/series of PHS, the term "hamartoma" was often substituted for hamartoblastoma given what appeared to be a benign natural history of this lesion. Additional confusion in the literature has ensued since most hypothalamic hamartomas (HH) encountered on the clinical neuropathology service are "isolated" in nature (ie, no other congenital malformations) and present in a very different and stereotypical fashion with gelastic seizures and/or precocious puberty. While genomic investigations of isolated HH have begun to uncover a mutational profile of these cases, GLI3 mutations have only been recognized in a small subset of isolated HH. Herein, we describe the autopsy findings from a 21-week gestational age fetus with features of PHS. Moreover, we provide a detailed description of the hypothalamic tumor affecting this fetus and propose a novel subclassification of HH, distinguishing syndromic from isolated forms based upon the presence or absence of neocortical-like areas.

Phase Behavior of Binary Blends of AB+AC Block Copolymers with compatible B and C blocks

Science.gov (United States)

Pryamitsyn, Victor; Ganesan, Venkat

2012-02-01

Recently the experimental studies of phase behavior of binary blends of PS-b-P2VP and PS-b-PHS demonstrated an interesting effect: blends of symmetric PS-b-P2VP and shorter symmetric (PS-b-PHS) formed cylindrical HEX and spherical BCC phases, while each pure component formed lamellas. The miscibility of P2VP and PHS is caused by the hydrogen bonding between P2VP and PHS,which can be described as a negative Flory ?-parameter between P2VP and PHS. We developed a theory of the microphase segregation of AB+AC blends of diblock copolymers based on strong stretching theory. The main result of our theory is that in the copolymer brush-like layer formed by longer B chain and shorter C chains, the attraction between B and shorter C chains causes relative stretching of short C chains and compression of longer B chains. The latter manifests in an excessive bending force towards the grafting surface (BC|AA interface). Such bending force causes a transition from a symmetric lamella phase to a HEX cylinder or BCC spherical phases with the BC phase being a ``matrix'' component. In a blend of asymmetric BCC sphere forming copolymers (where B and C segments are the minor components), such bending force may unfold BCC spherical phase to a HEX cylinder phase, or even highly uneven lamella phases.

Overlap of PIV syndrome, VACTERL and Pallister-Hall syndrome: clinical and molecular analysis.

Science.gov (United States)

Killoran, C E; Abbott, M; McKusick, V A; Biesecker, L G

2000-07-01

The polydactyly, imperforate anus, vertebral anomalies syndrome (PIV, OMIM 174100) was determined as a distinct syndrome by Say and Gerald in 1968 (Say B, Gerald PS. Lancet 1968: 2: 688). We noted that the features of PIV overlap with the VATER association and Pallister-Hall syndrome (PHS, OMIM 146510), which includes polydactyly, (central or postaxial), shortened fingers, hypoplastic nails, renal anomalies, imperforate anus, and hypothalamic hamartoma. Truncation mutations in GL13, a zinc finger transcription factor gene, have been shown to cause PHS. We performed a molecular evaluation on a patient diagnosed with PIV, whose mother, grandfather, and maternal aunt had similar malformations. We sequenced the GLI3 gene in the patient to determine if she had a mutation. The patient was found to have a deletion in nucleotides 2188-2207 causing a frameshift mutation that predicts a truncated protein product of the gene. Later clinical studies demonstrated that the patient also has a hypothalamic hamartoma, a finding in PHS. We concluded that this family had atypical PHS and not PIV. This result has prompted us to re-evaluate the PIV literature to see if PIV is a valid entity. Based on these data and our examination of the literature, we conclude that PIV is not a valid diagnostic entity. We conclude that patients diagnosed with PIV should be reclassified as having VACTERL, or PHS, or another syndrome with overlapping malformations.

48 CFR 352.270-5 - Care of laboratory animals.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Care of laboratory animals... of laboratory animals. (a) As prescribed in 370.403(a), the Contracting Officer shall insert the... on Humane Care and Use of Laboratory Animals (January 2006) The Public Health Service (PHS) Policy on...

Databases in Healthcare.

Science.gov (United States)

1980-03-01

the Harvard School of Public Health.) The Division of Biostatistics and Epidemiology in the Sidney Farber Cancer Institute of the Harvard School of...34; NCHSR Research Digest Series, DHEW, Pub. no. (PHS) 78-3219, 1978. Duncan78 Duncan, K.A.: "A Total System for Dentistry " in Information Technology in

77 FR 32116 - Findings of Research Misconduct

Science.gov (United States)

2012-05-31

..., R. Thomas, D. Neil Hayes, M. Meyerson, D.J. Kwiatkowski, and K.-K. Wong, submitted to the Journal of... supervisory plan must be designed to ensure the scientific integrity of his research contribution; Respondent... application for PHS funds or any report, manuscript, or abstract of PHS-funded research in which he is...

A system for offshore loading/unloading of a flowable medium, especially oil. System for offshore lasting/lossing av et strmbart medium, srlig olje

Energy Technology Data Exchange (ETDEWEB)

Breivik, K.; Smedal, A.; Syvertsen, K.

1994-07-04

The invention deals with a system for transferring a flowable medium, especially oil, to or from a floating vessel. The system comprises a buoyancy unit in the form of a submerged buoy which is anchored to the sea bed and which is connected to at least one transfer line for medium, a downwardly open receiving means arranged on the vessel below the water surface and arranged for receipt and connection of the buoy, a hoisting means for raising the buoy for introduction thereof into the receiving means, and a means for allowing the vessel to turn about a vertical axis through the buoy when this is connected in the receiving means. The receiving means is a module arranged at a submerged location at the outer side of the hull of the vessel, and preferably is built into the low portion of the vessel, and the buoy comprises an outer buoyancy member and centrally therein a rotatably mounted member for the passage of medium. Further, in the inner space of the module there is provided a locking mechanism for releasable locking of the outer buoyancy member to the module, so that the outer member will turn about the central member with turing of the vessel, a coupling unit, which is associated with a tube system provided on the vessel for the transfer of medium, being connected to the central member through a swivel means. 6 figs.

Effective bioremediation strategy for rapid in situ cleanup of anoxic marine sediments in mesocosm oil spill simulation.

Directory of Open Access Journals (Sweden)

Maria eGenovese

2014-04-01

Full Text Available The purpose of present study was the simulation of an oil spill accompanied by burial of significant amount of petroleum hydrocarbons (PHs in coastal sediments. Approximately 1,000 kg of sediments collected in Messina harbor were spiked with Bunker C furnace fuel oil (6,500 ppm. The rapid consumption of oxygen by aerobic heterotrophs created highly reduced conditions in the sediments with subsequent recession of biodegradation rates. As follows, after three months of ageing, the anaerobic sediments did not exhibit any significant levels of biodegradation and more than 80% of added Bunker C fuel oil remained buried. Anaerobic microbial community exhibited a strong enrichment in sulfate-reducing PHs-degrading and PHs-associated Deltaproteobacteria. As an effective bioremediation strategy to clean up these contaminated sediments, we applied a Modular Slurry System (MSS allowing the containment of sediments and their physical-chemical treatment, e.g. aeration. Aeration for three months has increased the removal of main PHs contaminants up to 98%. As revealed by CARD-FISH, qPCR and 16S rRNA gene clone library analyses, addition of Bunker C fuel oil initially affected the activity of autochthonous aerobic obligate marine hydrocarbonoclastic bacteria (OMHCB, and after one month more than the third of microbial population was represented by Alcanivorax-, Cycloclasticus- and Marinobacter-related organisms. In the end of the experiment, the microbial community composition has returned to a status typically observed in pristine marine ecosystems with no detectable OMHCB present. Eco-toxicological bioassay revealed that the toxicity of sediments after treatment was substantially decreased. Thus, our studies demonstrated that petroleum-contaminated anaerobic marine sediments could efficiently be cleaned through an in situ oxygenation which stimulates their self-cleaning potential due to reawakening of allochtonous aerobic OMHCB.

Beneficial effects of protein hydrolysates in exercise and sports nutrition.

Science.gov (United States)

Yuan, J; Jiang, B; Li, K; Shen, W; Tang, J L

2017-01-01

Protein hydrolysates (PH) are rich sources of proteins that supply the need of exercising muscles. PHs are enriched in di- and tripeptides and are better than free amino acids or intact proteins when muscle anabolic effect is considered. Digestion, absorption and muscle uptake of amino acids are faster and more efficient when PH is ingested in comparison to the respective intact protein. PHs not only enhance endurance in high intensity exercise regimen, but also help in faster post-exercise recovery of muscle by promoting glycogen synthesis, although the latter effect requires more convincing evidence. PHs have been shown to exhibit insulinotrophic effect as it enhances the secretion of insulin and the hormone, in turn, exerts muscle anabolic effect.

SOLID PHASE EXTRACTION OF TRACE AMOUNTS OF ZINC AND ...

African Journals Online (AJOL)

The presence of trace heavy metals lower than the detection limits of ... utilized for the preconcentration and separation of trace metal ions from different matrices [17- .... At high pHs, the OH−on the sorbent can adsorbed cations, ... but, in the low pHs, the surface charge is neutralized and OH−is removed from the surface,.

Psychological distress and intelligence in young men

DEFF Research Database (Denmark)

Teasdale, T. W.; Antal, K.

2016-01-01

of distress-related items, the Personal Health Schema (PHS), having yes/no responses, together with a general IQ test, the Børge Prien's Prøve (BPP). The rate of endorsement of the PHS items was low, ranging between 3% and 29% with a median of two/three items. The Pearson correlation between the two variables...

Clinical Manifestations, Outcomes, and Etiologies of Perinatal Stroke in Taiwan: Comparisons between Ischemic, and Hemorrhagic Stroke Based on 10-year Experience in A Single Institute

Directory of Open Access Journals (Sweden)

Chien-Chung Lee

2017-06-01

Conclusion: Perinatal stroke is associated with high mortality and morbidity rates in infants. Clinically, it can be difficult to distinguish PAIS and PHS. One should keep a high level of suspicion, especially for PHS, if infants develop unexplained seizure, cyanosis, conscious change, anemia, and/or thrombocytopenia. A systematic diagnostic approach is helpful in identifying the etiologies of perinatal stroke.

ESF [Exploratory Shaft Facility] flexibility analysis

International Nuclear Information System (INIS)

Brusenback, R.W.

1987-03-01

This report directs that uncertainty allowances be included within the ESF facilities. The recommendations herein developed are intended as input to Title II Design criteria. Flexibility is measured first by lineal ft of drift, and then by hoisting rate and capacity of supporting utilities and services. A defined probability of need shows an extra 10,000 ft of drift for the first level of flexibility responding to testing and operations, and over 60,000 ft of drift for the second level of flexibility which recognizes possible need for perimeter drifting to investigate geologic stratigraphy. Observing there will be time constraints, a single shaft muck hoisting rate up to 170 to 250 tons per hour is recommended. The potential hoisting rate recommended for flexibility should be satisfied by a hoist approximately equivalent to, or conveniently upgraded from those being considered for sinking and construction, or 1000 horsepower. The cost of flexibility is limited to engineering planning and design (mostly conceptual) which makes later expansion achievable, and to selected items for initial construction where later upgrading would be impractical, impossible, or very costly. The cost is fixed to the level of flexibility and does not vary with excavated footage. The incremental margin is only a small fraction of the additional footage made available. Flexibility presents a strategy and not a position of design or technology. Examples used in this report are intended to be illustrative only, and not to lead design or cost estimates. 7 tabs

Spatiotemporal Monte Carlo transport methods in x-ray semiconductor detectors: application to pulse-height spectroscopy in a-Se.

Science.gov (United States)

Fang, Yuan; Badal, Andreu; Allec, Nicholas; Karim, Karim S; Badano, Aldo

2012-01-01

The authors describe a detailed Monte Carlo (MC) method for the coupled transport of ionizing particles and charge carriers in amorphous selenium (a-Se) semiconductor x-ray detectors, and model the effect of statistical variations on the detected signal. A detailed transport code was developed for modeling the signal formation process in semiconductor x-ray detectors. The charge transport routines include three-dimensional spatial and temporal models of electron-hole pair transport taking into account recombination and trapping. Many electron-hole pairs are created simultaneously in bursts from energy deposition events. Carrier transport processes include drift due to external field and Coulombic interactions, and diffusion due to Brownian motion. Pulse-height spectra (PHS) have been simulated with different transport conditions for a range of monoenergetic incident x-ray energies and mammography radiation beam qualities. Two methods for calculating Swank factors from simulated PHS are shown, one using the entire PHS distribution, and the other using the photopeak. The latter ignores contributions from Compton scattering and K-fluorescence. Comparisons differ by approximately 2% between experimental measurements and simulations. The a-Se x-ray detector PHS responses simulated in this work include three-dimensional spatial and temporal transport of electron-hole pairs. These PHS were used to calculate the Swank factor and compare it with experimental measurements. The Swank factor was shown to be a function of x-ray energy and applied electric field. Trapping and recombination models are all shown to affect the Swank factor.

Comparing solar photovoltaic energy versus stretch of the lines on transmission: real case of lacking rural community without electric energy; Comparativo entre energia solar fotovoltaica versus extensao de rede, aplicado em caso concreto de uma comunidade carente e remota

Energy Technology Data Exchange (ETDEWEB)

Mesquita, Rafael Pimenta; Souza, Teofilo Miguel de; Gastaldi, Andre Fava [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Guaratingueta, SP (Brazil). Centro de Energias Renovaveis], e-mail: teofilo@feg.unesp.br

2004-07-01

In the work observed a lacking rural community and without electric energy. They were analyzed and compared two approaches of lead energy to this population: Photovoltaic energy and stretch of the lines of transmission from the concessionaire. It carried out himself a study about the photovoltaic system as well as electric kinds of batteries, controllers, panels photovoltaic and invertors. Had also a hoist about the costs of acquisition, installation and maintenance of the photovoltaic system and of the conventional system (stretch from the net from the concessionaire of energy). Finally compared the two systems regarding the costs. (author)

Factors That Affect Quality of Life among People Living with HIV Attending an Urban Clinic in Uganda: A Cohort Study.

Directory of Open Access Journals (Sweden)

Doris Mutabazi-Mwesigire

Full Text Available With the availability of antiretroviral therapy (ART and primary general care for people living with HIV (PLHIV in resource limited settings, PLHIV are living longer, and HIV has been transformed into a chronic illness. People are diagnosed and started on treatment when they are relatively well. Although ART results in clinical improvement, the ultimate goal of treatment is full physical functioning and general well-being, with a focus on quality of life rather than clinical outcomes. However, there has been little research on the relationship of specific factors to quality of life in PLHIV. The objective of this study was to investigate factors associated with quality of life among PLHIV in Uganda receiving basic care and those on ART.We enrolled 1274 patients attending an HIV outpatient clinic into a prospective cohort study. Of these, 640 received ART. All were followed up at 3 and 6 months. Health related quality of life was assessed with the MOS-HIV Health Survey and the Global Person Generated Index (GPGI. Multivariate linear regression and logistic regression with generalized estimating equations were used to examine the relationship of social behavioral and disease factors with Physical Health Summary (PHS score, Mental Health Summary (MHS score, and GPGI.Among PLHIV receiving basic care, PHS was associated with: sex (p=0.045 - females had lower PHS; age in years at enrollment (p=0.0001 - older patients had lower PHS; and depression (p<0.001 - depressed patients had lower PHS. MHS was only associated with opportunistic infection (p=0.01 - presence of an opportunistic infection was associated with lower MHS. For the GPG the associated variables were age (p=0.03 - older patients had lower GPGI; education (p=0.01 - higher education associated with higher GPGI; and depression - patients with depression had a lower GPGI (p<0.001. Among patients on ART, PHS was associated with: study visit (p=0.01, with increase in time there was better PHS

Regulation of the wind power production. Contribution of the electric vehicles and other energy storage systems

Energy Technology Data Exchange (ETDEWEB)

Mateus, Carlos B. [Instituto de Meteorologia, Lisboa (Portugal); Estanqueiro, Ana [INETI/LNEG - National Laboratory for Energy and Geology, Lisbon (Portugal)

2012-07-01

The increase in penetration of variable renewable energy sources (RES) introduced additional difficulties regarding the management of the Portuguese Power System. This is mainly due to the high temporal variability and low controllability, characteristics of these kinds of sources. There is a real need to reduce the impact of non-dispatchable RES sources; maximizing their penetration and minimizing curtailment. This is especially true for wind power and run-of-the-river hydro (ROR); as it appears beneficial to combine their variable production with added capacity of energy storage and demand side management; thereby increasing the flexibility of the power system as a whole. This paper aims to assess the excess wind generation (and other non-dispatchable sources); this for periods of production's excess in a 2020 timeframe, and assuming different weather scenarios. The adjustment of wind power generation (WPG) profile to the load profile is also addressed; the result is computed in the form of the value of the energy temporally deferred, using Pumped Hydro Storage (PHS) power plants as well as electric Vehicles (EVs). (orig.)

Informatics enables public health surveillance

Directory of Open Access Journals (Sweden)

Scott J. N McNabb

2017-01-01

Full Text Available Over the past decade, the world has radically changed. New advances in information and communication technologies (ICT connect the world in ways never imagined. Public health informatics (PHI leveraged for public health surveillance (PHS, can enable, enhance, and empower essential PHS functions (i.e., detection, reporting, confirmation, analyses, feedback, response. However, the tail doesn't wag the dog; as such, ICT cannot (should not drive public health surveillance strengthening. Rather, ICT can serve PHS to more effectively empower core functions. In this review, we explore promising ICT trends for prevention, detection, and response, laboratory reporting, push notification, analytics, predictive surveillance, and using new data sources, while recognizing that it is the people, politics, and policies that most challenge progress for implementation of solutions.

CANISTER TRANSFER SYSTEM DESCRIPTION DOCUMENT

International Nuclear Information System (INIS)

B. Gorpani

2000-01-01

The Canister Transfer System receives transportation casks containing large and small disposable canisters, unloads the canisters from the casks, stores the canisters as required, loads them into disposal containers (DCs), and prepares the empty casks for re-shipment. Cask unloading begins with cask inspection, sampling, and lid bolt removal operations. The cask lids are removed and the canisters are unloaded. Small canisters are loaded directly into a DC, or are stored until enough canisters are available to fill a DC. Large canisters are loaded directly into a DC. Transportation casks and related components are decontaminated as required, and empty casks are prepared for re-shipment. One independent, remotely operated canister transfer line is provided in the Waste Handling Building System. The canister transfer line consists of a Cask Transport System, Cask Preparation System, Canister Handling System, Disposal Container Transport System, an off-normal canister handling cell with a transfer tunnel connecting the two cells, and Control and Tracking System. The Canister Transfer System operating sequence begins with moving transportation casks to the cask preparation area with the Cask Transport System. The Cask Preparation System prepares the cask for unloading and consists of cask preparation manipulator, cask inspection and sampling equipment, and decontamination equipment. The Canister Handling System unloads the canister(s) and places them into a DC. Handling equipment consists of a bridge crane hoist,; DC--loading manipulator, lifting fixtures, and small canister staging racks. Once the cask has been unloaded, the Cask Preparation System decontaminates the cask exterior and returns it to the Carrier/Cask Handling System via the Cask Transport System. After the; DC--is fully loaded, the Disposal Container Transport System moves the; DC--to the Disposal Container Handling System for welding. To handle off-normal canisters, a separate off-normal canister

Canister Transfer System Description Document

International Nuclear Information System (INIS)

2000-01-01

The Canister Transfer System receives transportation casks containing large and small disposable canisters, unloads the canisters from the casks, stores the canisters as required, loads them into disposal containers (DCs), and prepares the empty casks for re-shipment. Cask unloading begins with cask inspection, sampling, and lid bolt removal operations. The cask lids are removed and the canisters are unloaded. Small canisters are loaded directly into a DC, or are stored until enough canisters are available to fill a DC. Large canisters are loaded directly into a DC. Transportation casks and related components are decontaminated as required, and empty casks are prepared for re-shipment. One independent, remotely operated canister transfer line is provided in the Waste Handling Building System. The canister transfer line consists of a Cask Transport System, Cask Preparation System, Canister Handling System, Disposal Container Transport System, an off-normal canister handling cell with a transfer tunnel connecting the two cells, and Control and Tracking System. The Canister Transfer System operating sequence begins with moving transportation casks to the cask preparation area with the Cask Transport System. The Cask Preparation System prepares the cask for unloading and consists of cask preparation manipulator, cask inspection and sampling equipment, and decontamination equipment. The Canister Handling System unloads the canister(s) and places them into a DC. Handling equipment consists of a bridge crane/hoist, DC loading manipulator, lifting fixtures, and small canister staging racks. Once the cask has been unloaded, the Cask Preparation System decontaminates the cask exterior and returns it to the Carrier/Cask Handling System via the Cask Transport System. After the DC is fully loaded, the Disposal Container Transport System moves the DC to the Disposal Container Handling System for welding. To handle off-normal canisters, a separate off-normal canister handling

Association of remote dexterity and remote lifting for maintenance in fuel reprocessing industry

International Nuclear Information System (INIS)

Streiff, G.; Auchapt, P.; Vertut, J.

1984-01-01

The MA23M is an articulated bilateral servomanipulator with theoretically unlimited distance between master and slave stations. The last developments being carried on enable its good utilization in the large cells that will exist in the next reprocessing plants. Recent developments concerning computer aided operations like automatic TV tracking of the effector and manipulative assistance of MA23 and transporter enable realistic application in the large cells of the future reprocessing plants. In another hand manipulator containment, transfer and maintenance, in a glove box have been demonstrated. Concerning the in-cell process equipment to be maintained, extensive testing has shown that the association with a hoist is an excellent trade off in power and dexterity enabling solution of practically all expected or unexpected operations. According to the in-cell machinery and to the difficulty of the operation, one or two dextrous arms can be associated with one hoist. Dismantling of machines or dismantling of the whole facility will be possible by developing special tooling handled by the dextrous manipulator or, if too heavy, oriented by the manipulator but suspended to the hoist

New insights into genotype-phenotype correlation for GLI3 mutations.

Science.gov (United States)

Démurger, Florence; Ichkou, Amale; Mougou-Zerelli, Soumaya; Le Merrer, Martine; Goudefroye, Géraldine; Delezoide, Anne-Lise; Quélin, Chloé; Manouvrier, Sylvie; Baujat, Geneviève; Fradin, Mélanie; Pasquier, Laurent; Megarbané, André; Faivre, Laurence; Baumann, Clarisse; Nampoothiri, Sheela; Roume, Joëlle; Isidor, Bertrand; Lacombe, Didier; Delrue, Marie-Ange; Mercier, Sandra; Philip, Nicole; Schaefer, Elise; Holder, Muriel; Krause, Amanda; Laffargue, Fanny; Sinico, Martine; Amram, Daniel; André, Gwenaelle; Liquier, Alain; Rossi, Massimiliano; Amiel, Jeanne; Giuliano, Fabienne; Boute, Odile; Dieux-Coeslier, Anne; Jacquemont, Marie-Line; Afenjar, Alexandra; Van Maldergem, Lionel; Lackmy-Port-Lis, Marylin; Vincent-Delorme, Catherine; Chauvet, Marie-Liesse; Cormier-Daire, Valérie; Devisme, Louise; Geneviève, David; Munnich, Arnold; Viot, Géraldine; Raoul, Odile; Romana, Serge; Gonzales, Marie; Encha-Razavi, Ferechte; Odent, Sylvie; Vekemans, Michel; Attie-Bitach, Tania

2015-01-01

The phenotypic spectrum of GLI3 mutations includes autosomal dominant Greig cephalopolysyndactyly syndrome (GCPS) and Pallister-Hall syndrome (PHS). PHS was first described as a lethal condition associating hypothalamic hamartoma, postaxial or central polydactyly, anal atresia and bifid epiglottis. Typical GCPS combines polysyndactyly of hands and feet and craniofacial features. Genotype-phenotype correlations have been found both for the location and the nature of GLI3 mutations, highlighting the bifunctional nature of GLI3 during development. Here we report on the molecular and clinical study of 76 cases from 55 families with either a GLI3 mutation (49 GCPS and 21 PHS), or a large deletion encompassing the GLI3 gene (6 GCPS cases). Most of mutations are novel and consistent with the previously reported genotype-phenotype correlation. Our results also show a correlation between the location of the mutation and abnormal corpus callosum observed in some patients with GCPS. Fetal PHS observations emphasize on the possible lethality of GLI3 mutations and extend the phenotypic spectrum of malformations such as agnathia and reductional limbs defects. GLI3 expression studied by in situ hybridization during human development confirms its early expression in target tissues.

New insights into genotype–phenotype correlation for GLI3 mutations

Science.gov (United States)

Démurger, Florence; Ichkou, Amale; Mougou-Zerelli, Soumaya; Le Merrer, Martine; Goudefroye, Géraldine; Delezoide, Anne-Lise; Quélin, Chloé; Manouvrier, Sylvie; Baujat, Geneviève; Fradin, Mélanie; Pasquier, Laurent; Megarbané, André; Faivre, Laurence; Baumann, Clarisse; Nampoothiri, Sheela; Roume, Joëlle; Isidor, Bertrand; Lacombe, Didier; Delrue, Marie-Ange; Mercier, Sandra; Philip, Nicole; Schaefer, Elise; Holder, Muriel; Krause, Amanda; Laffargue, Fanny; Sinico, Martine; Amram, Daniel; André, Gwenaelle; Liquier, Alain; Rossi, Massimiliano; Amiel, Jeanne; Giuliano, Fabienne; Boute, Odile; Dieux-Coeslier, Anne; Jacquemont, Marie-Line; Afenjar, Alexandra; Van Maldergem, Lionel; Lackmy-Port-Lis, Marylin; Vincent- Delorme, Catherine; Chauvet, Marie-Liesse; Cormier-Daire, Valérie; Devisme, Louise; Geneviève, David; Munnich, Arnold; Viot, Géraldine; Raoul, Odile; Romana, Serge; Gonzales, Marie; Encha-Razavi, Ferechte; Odent, Sylvie; Vekemans, Michel; Attie-Bitach, Tania

2015-01-01

The phenotypic spectrum of GLI3 mutations includes autosomal dominant Greig cephalopolysyndactyly syndrome (GCPS) and Pallister–Hall syndrome (PHS). PHS was first described as a lethal condition associating hypothalamic hamartoma, postaxial or central polydactyly, anal atresia and bifid epiglottis. Typical GCPS combines polysyndactyly of hands and feet and craniofacial features. Genotype–phenotype correlations have been found both for the location and the nature of GLI3 mutations, highlighting the bifunctional nature of GLI3 during development. Here we report on the molecular and clinical study of 76 cases from 55 families with either a GLI3 mutation (49 GCPS and 21 PHS), or a large deletion encompassing the GLI3 gene (6 GCPS cases). Most of mutations are novel and consistent with the previously reported genotype–phenotype correlation. Our results also show a correlation between the location of the mutation and abnormal corpus callosum observed in some patients with GCPS. Fetal PHS observations emphasize on the possible lethality of GLI3 mutations and extend the phenotypic spectrum of malformations such as agnathia and reductional limbs defects. GLI3 expression studied by in situ hybridization during human development confirms its early expression in target tissues. PMID:24736735

Prostaglandin H synthase-mediated bioactivation of the amino acid pyrolysate product Trp P-2

Energy Technology Data Exchange (ETDEWEB)

Petry, T.W.; Krauss, R.S.; Eling, T.E.

1986-08-01

We report evidence that the mutagen and carcinogen 3-amino-1-methyl-5H pyrido(4,3b)indole (Trp P-2) is a substrate for co-oxidation by prostaglandin H synthase (PHS) in ram seminal vesicle (RSV) microsomes. Trp P-2 serves as a reducing cofactor for the hydroperoxidase activity of PHS as shown by the concentration-dependent inhibition of the hydroperoxidase catalyzed incorporation of molecular oxygen into phenylbutazone. Spectral data suggest that this metabolism results in disruption of the double bond conjugation within the nucleus of the molecule. A single metabolite peak which was dependent upon arachidonic acid and substrate concentration was separated from the parent compound by h.p.l.c. following incubation with RSV microsomes. Co-oxidation of Trp P-2 produced reactive intermediates which bound covalently to microsomal protein (9 nmol/mg) and to calf thymus DNA (475 pmol/mg). Binding was inhibited by indomethacin, and supported by substitution of hydrogen peroxide for arachidonic acid. These data suggest a possible role for PHS in the in situ activation of Trp P-2 to its ultimate carcinogenic form in tissues which contain PHS.

U.S. Public Health Service Commissioned Corps pharmacists: making a difference in advancing the nation's health.

Science.gov (United States)

Flowers, Louis; Wick, Jeannette; Figg, William Douglas; McClelland, Robert H; Shiber, Michael; Britton, James E; Ngo, Diem-Kieu H; Borders-Hemphill, Vicky; Mead, Christina; Zee, Jerry; Huntzinger, Paul

2009-01-01

To describe how U.S. Public Health Service (PHS) pharmacists serving in jobs that are normal for them, but considerably different than those found in the private sector, are making a difference in advancing the nation's health. Pharmacists who serve in the Commissioned Corps of PHS fill roles that are considerably different than their counterparts in the private sector. Their work takes them out from behind the counter and into the world. Pharmacy officers advance the health and safety of the nation by their involvement in the delivery of direct patient care to medically underserved people, national security, drug vigilance, research, and policy-making endeavors. PHS pharmacists fill essential public health leadership and service roles throughout the U.S. Department of Health and Human Services (HHS) and certain non-HHS federal agencies and programs. The Health Resources and Services Administration, National Institutes of Health, Federal Bureau of Prisons, Indian Health Service, Food and Drug Administration, and U.S. Coast Guard are among the many federal agencies in which pharmacy officers are assigned. In each setting, PHS pharmacists find traditional roles augmented with assignments and challenges that broaden the scope of their practice.

Development and use of a remote waste handling system for disposal of greater confinement wastes

International Nuclear Information System (INIS)

Williams, R.E.

1985-01-01

This paper discusses the design and development of a remotely controlled waste handling system (RWHS) for use in radioactive waste disposal operations. A RWHS was developed at the US Department of Energy's (DOE) Nevada Test Site for use in the Greater Confinement Disposal Test (GCDT). The RWHS consists of a remote control console and the following remotely operated features: a crane, a grapple/manipulator module which is suspended by the crane hoist hook, and closed-circuit television cameras. The RWHS was used to safely place high-specific-activity radioactive waste in greater confinement disposal. Between December 15, 1983, and February 23, 1984, five encapsulated sources were open-air transferred from shielded shipping casks and placed 30 m down a 3-m-dia augered shaft using the RWHS. These sources contained approximately 460 kCi of 90 Sr, 21 kCi of 137 Cs, and 390 Ci of 60 Co. Each source was transferred safely and efficiently and operational personnel did not receive any recordable doses. 3 references, 5 figures

Resource Conservation and Recovery Act Part B permit application [for the Waste Isolation Pilot Plant (WIPP)

International Nuclear Information System (INIS)

1993-01-01

This volume contains Appendix D2, engineering design basis reports. Contents include: Design considerations for the waste hoist of the Waste Isolation Pilot Plant (WIPP); A site-specific study of wind and tornado probabilities at the WIPP Site in southeast New Mexico; Seismic evaluation report of underground facilities; and calculations for analysis of wind loads and tornado loads for WHB, seismic calculations, calculations for VOC-10 monitoring system, and for shaft at station A

Army Modernization Strategy 2008

Science.gov (United States)

2008-01-01

aircraft has a hoist for use in emergency evacuations. The ARNG will be the primary user of the LUH, conducting missions in support of homeland...including airframes, wiring bundles and hydraulic systems on the remanufactured CH-47Fs are new. FUE was completed on 20 July 2007. Subsequent CH-47F...provides a self-loading, hauling and dumping capability to perform efficient earth- moving tasks in support of earthmoving projects. It can excavate

Comparison of the Canadian and US Laws, Regulations, Policies, and Systems of Oversight for Animals in Research.

Science.gov (United States)

Griffin, Gilly; Locke, Paul

2016-05-01

The Canadian and United States' approaches to oversight of animals in research are both based on the "3Rs" principles outlined in Russell and Burch's classic text, The Principles of Humane Experimental Technique. Each country seeks to protect the welfare of animals, while permitting the legitimate goals of scientific research to be attained according to the legal principles, cultures, and strengths and constraints of their jurisprudential and societal traditions. Canada is one of the most decentralized federations in the world, and regulation of activities is based to a great extent on custom and practice. The United States is more hierarchical and, at least with respect to laws governing animal research, more centralized. Accordingly, the Canadian approach is rooted in the concepts of social contracts, with a greater emphasis on guidance and policy and less reliance on legislation. No federal (national) direct legislation of laboratory animal welfare exists, although the federal government uses its criminal and spending authorities to shape behavior. The central feature of the Canadian system is the Canadian Council on Animal Care, which was formed to support universities and government departments involved in animal-based science. Animal care committees play a central role in implementing the guidelines and policies in facilities that carry out animal research. The United States has enacted two federal (national) laws applicable to animals in research. The Animal Welfare Act is a more traditional, command-and-control law that gives authority to the US Department of Agriculture to promulgate regulations, inspect facilities, and enforce violations. The Health Research Extension Act, which amended the US Public Health Services (PHS) Act, applies to any activity conducted or supported by the PHS, including research efforts supported by the US National Institutes of Health. It is largely nonregulatory and establishes a system of assurances and policies that covered

Electricity storage by gas pumping. An introduction to thermodynamic storage processes

International Nuclear Information System (INIS)

Ruer, Jacques

2013-01-01

To date, Pumped Hydro Storage (PHS) is practically the only technology used to store large quantities of electricity. There are however other ways to achieve the same goal. There are not yet well known, because the interest for large scale storage is quite new A complete family of storage technologies can be defined as 'Thermodynamic Storage Systems'. Their only common factor is that a gas is pumped and expanded in the process. If the gas is air taken from the atmosphere and discharged to it, the system is said 'an open system'. This is already developed in the form of Compressed Air Energy Storage (CAES). Different embodiments are possible, following the way the heat gene - rated during the compression stage is conserved. The compressed air is generally stored in underground caverns created in deep salt formations. 2 installations are presently operating and many projects are envisaged. if the gas circulates in closed loop within the plant, the system is said 'a closed system' In this case, the energy is stored as heat and/or cold at different temperature levels. A great variety of technologies can be imagined and are under development, using different gases (e.g. argon, CO 2 ) and different temperature ranges. PHS and CAES require specific sites for water reservoirs or underground caverns. The dosed systems can be installed basically anywhere. (author)

New insights into genotype–phenotype correlation for GLI3 mutations

OpenAIRE

Démurger, Florence; Ichkou, Amale; Mougou-Zerelli, Soumaya; Le Merrer, Martine; Goudefroye, Géraldine; Delezoide, Anne-Lise; Quélin, Chloé; Manouvrier, Sylvie; Baujat, Geneviève; Fradin, Mélanie; Pasquier, Laurent; Megarbané, André; Faivre, Laurence; Baumann, Clarisse; Nampoothiri, Sheela

2014-01-01

The phenotypic spectrum of GLI3 mutations includes autosomal dominant Greig cephalopolysyndactyly syndrome (GCPS) and Pallister–Hall syndrome (PHS). PHS was first described as a lethal condition associating hypothalamic hamartoma, postaxial or central polydactyly, anal atresia and bifid epiglottis. Typical GCPS combines polysyndactyly of hands and feet and craniofacial features. Genotype–phenotype correlations have been found both for the location and the nature of GLI3 mutations, highlightin...

PÚRPURA DE HENOCH-SCHONLEIN – O ENVOLVIMENTO RENAL PRECOCE

Directory of Open Access Journals (Sweden)

Inês Medeiros

2016-07-01

Comentários: O caso descrito ilustra um acometimento renal precoce e pouco frequente na PHS, de acordo com o descrito na literatura. A presença de proteinúria nefrótica e de síndrome nefrótica, secundárias à PHS, está associada a um prognóstico menos favorável, pelo que se ressalva a importância do seguimento a longo prazo.

Civil Engineering & Design Standards Manual

OpenAIRE

Vänttinen, Eetu

2014-01-01

Civil Discipline Engineering department in Foster Wheeler Energia Oy takes care of the construction of foundation, steel frame, platforms, cladding/roofing, HVAC, elevator, hoist and central vacuum system of the boiler building. The goal of the thesis was to compile a design manual for the department to ease up the startup of the design of a new project and standardize the design. Main objective was to gather together all the existing guidelines, standards and directives regarding the des...

Transportability

Science.gov (United States)

2013-04-25

and dump trucks are exceptions and may be tested at a curb weight or weight less than the gross weight. Consult with SDDCTEA for these types of...will be provided by a hydraulic actuator system. Accomplish the provision loading for the durations specified in MIL-STD-209K. Measure the loads...to flight testing. (b) Once rigged, attach the sling set apex to the cargo hook of a mobile or overhead crane and hoist the item from the ground

[Accident with biological material at the prehospital mobile care: reality for health and non-healthcare workers].

Science.gov (United States)

Tipple, Anaclara Ferreira Veiga; Silva, Elisangelo Aparecido Costa; Teles, Sheila Araújo; Mendonça, Katiane Martins; Souza, Adenícia Custódia Silva E; Melo, Dulcelene Sousa

2013-01-01

Analytical transversal study that was conducted with the objectives of identifying the prevalence and characterizing the accidents with biological material among professionals in pre-hospital service (PHS) and comparing the risk behaviors adopted by healthcare and non-healthcare groups that can affect the occurrence and seriousness of such accidents. Data were obtained by questionnaire applied to all PHS workers in Goiânia-GO. The study revealed a high prevalence of accidents involving biological material which, although higher for the healthcare group, also affected the non-healthcare group. There were significant (p accidents in both groups: not using gloves, masks or eye protectors; inappropriate disposal of sharps; inadequate dress; re-capping of needles; and a lack of immunization against hepatitis B. The results underscore the importance of both groups in adhering to preventive measures, and further point to the need to structure and implement vigilance and control system for this type of accident.

Sphingosine-1-phosphate stimulates rat primary chondrocyte proliferation

International Nuclear Information System (INIS)

Kim, Mi-Kyoung; Lee, Ha Young; Kwak, Jong-Young; Park, Joo-In; Yun, Jeanho; Bae, Yoe-Sik

2006-01-01

Rat primary chondrocytes express the sphingosine-1-phosphate (S1P) receptor, S1P 2 , S1P 3 , S1P 4 , but not S1P 1 . When chondrocytes were stimulated with S1P or phytosphingosine-1-phosphate (PhS1P, an S1P 1 - and S1P 4 -selective agonist), phospholipase C-mediated cytosolic calcium increase was dramatically induced. S1P and PhS1P also stimulated two kinds of mitogen-activated protein kinases, extracellular signal-regulated kinase (ERK) and p38 kinase in chondrocytes. In terms of the two phospholipids-mediated functional modulation of chondrocytes, S1P and PhS1P stimulated cellular proliferation. The two phospholipids-induced chondrocyte proliferations were almost completely blocked by PD98059 but not by SB203580, suggesting that ERK but not p38 kinase is essentially required for the proliferation. Pertussis toxin almost completely inhibited the two phospholipids-induced cellular proliferation and ERK activation, indicating the crucial role of G i protein. This study demonstrates the physiological role of two important phospholipids (S1P and PhS1P) on the modulation of rat primary chondrocyte proliferation, and the crucial role played by ERK in the process

Perceived health status and cardiometabolic risk among a sample of youth in Mexico

Science.gov (United States)

Flores, Yvonne N.; Shaibi, Gabriel Q.; Morales, Leo S.; Salmerón, Jorge; Skalicky, Anne M.; Edwards, Todd C.; Gallegos-Carrillo, Katia; Patrick, Donald L.

2015-01-01

Purpose To examine differences in self-reported perceived mental and physical health status (PHS), as well as known cardiometabolic risk factors in a sample of normal weight, overweight, and obese Mexican youths. Methods Cross-sectional analysis of 164 youths aged 11-18 years recruited in Cuernavaca, Mexico. Participants completed a self-administered questionnaire that included measures of generic and weight-specific quality of life (QoL), perceived health, physical function, depressive symptoms, and body shape satisfaction. Height, weight and waist circumference were measured and body mass index (BMI) was determined. Fasting blood samples from participants yielded levels of glucose, triglycerides, and cholesterol (total, HDL and LDL). Results Nearly 50% of participants were female, 21% had a normal BMI, 39% were overweight, and 40% were obese. Obese youths reported significantly lower measures of PHS and showed an increase in cardiometabolic risk, compared to normal weight youths. Physical functioning, generic and weight-specific QoL were inversely associated with BMI, waist circumference and glucose. Depressive symptoms were positively correlated with BMI, waist circumference, glucose levels and HDL cholesterol. No correlation was found between PHS and cardiometabolic risk measures after controlling for BMI. Conclusions In this sample of Mexican youths, obesity was associated with a significantly lower PHS and increased cardiometabolic risk. PMID:25648756

Performance monitoring of electric shovels digging oil sands

Energy Technology Data Exchange (ETDEWEB)

Patnayak, S. [Alberta Univ., Edmonton, AB (Canada). Natural Resources Engineering Facility; Tannant, D.D. [Alberta Univ., Edmonton, AB (Canada). School of Mining and Petroleum Engineering; Parsons, I. [Syncrude Canada Ltd., Edmonton, AB (Canada). Edmonton Research Centre; Del Valle, V. [Syncrude Canada Ltd., Fort McMurray, AB (Canada)

2005-07-01

Some of the largest available mining equipment is used for oil sand mining operations. However, the performance of electric cable shovels varies with the diggability characteristics of the ground. In particular, oil sands diggability with cable shovels depends on structural geology, the depositional environment and geotechnical parameters. This paper described some of the key shovel performance indicators such as dig cycle time, digging energy and digging power. In winter, frost penetration can also affect oil sands diggability. The challenge of hard digging in oil sands is often addressed by blasting or ripping, which increases the cost of production and impedes productivity. The shovel performance is also influenced by other parameters such as operator skills, bucket and tooth design and shovel dipper trajectory. This paper demonstrated that hoist and crowd motor voltages and currents are useful in identifying the beginning and end of dig cycles. Performance indicators such as dig cycle time, hoist motor energy and power, and crowd motor energy and power were considered to assess material diggability. It was suggested that hoist power represents the ground diggability better than other performance indicators. 5 refs., 1 tab., 10 figs.

Decontamination and decommissioning of the Chemical Process Cell (CPC): Topical report for the period January 1985-March 1987

International Nuclear Information System (INIS)

Meigs, R.A.

1987-07-01

To support interim storage of vitrified High-Level Waste (HLW) at the West Valley Demonstration Project, the shielded, remotely operated Chemical Process Cell (CPC) was decommissioned and decontaminated. All equipment was removed, packaged and stored for future size reduction and decontamination. Floor debris was sampled, characterized, and vacuumed into remotely handled containers. The cell walls, ceiling, and floor were decontaminated. Three 20 Mg (22.5 ton) concrete neutron absorber cores were cut with a high-pressure water/abrasive jet cutting system and packaged for disposal. All operations were performed remotely using two overhead bridge cranes which included two 1.8 Mg (2 ton) hoists, one 14.5 Mg (16 ton) hoist, and an electromechanical manipulator or an industrial robot mounted on a mobile platform. Initial general area dose rates in the cell ranged from 1 to 50 R/h. Target levels of less than 10 mR/h general area readings were established before decontamination and decommissioning was initiated; general area dose rates between 200 mR/h and 1200 mR/h were obtained at the completion of the decontamination work. 4 refs., 11 figs., 8 tabs

Large hoisting machinery local damage acoustic emission monitoring of optical information acquisition research

Directory of Open Access Journals (Sweden)

Wan Shuai

2016-01-01

Full Text Available AE technology, an advanced fault diagnosis technique,is impacted by environmental noise during monitoring equipment. The occurrence of interfere noise,the fashion of interfere and the effect to the system in the AE automatic online monitoring system is analyzed. At present, most of the acoustic emission signal transmission by cable, this way of transmission has a limited transmission distance, shortcomings and so on signal easily disturbed. Is proposed in this paper based on the optical fiber transmission technology, designed and developed a information collection system based on optical fiber acoustic emission monitoring.This way has the advantages of long distance transmission, strong anti-jamming capability.

Development and fabrication of a dragline training system. Technical progress report, No. 1 (phase 1 final report)

Energy Technology Data Exchange (ETDEWEB)

Voss, William J.

1979-09-17

As a result of the task analysis and revision to the plan of instruction, certain desirable characteristics were recommended to be added to the dragline trainer. These essentially would provide for a high quality feedback and hard copy record of the trainee's performance. It was recommended that the trainer be able to produce and/or sense and record: drag and hoist over-spooling, dragchain/cone contact, bucket shock, bucket stall, lateral boom stress, tight lining, excessive rapid braking and reaction times to internal/external alarms. In addition, data such as cycle time, bucket position, yardage moved and cycles completed should be recorded and records printed. With the exception of drag chain and cone contact indications, these characteristics can be implemented in the computer program. In some cases, such as bucket stall and external alarms it will require instructor initiative to activate specific trainer scenario and reaction time measurements. It should be noted that these additional features, however desirable, add significantly to the required computer capability. Both processor cycle time and memory availability could be restraints. A faster, and larger system could accommodate these added features but at an increase in cost for the computer system. A study is in process and specific recommendations will result.

Role of environmental cleanliness and decontamination in care homes.

Science.gov (United States)

Cousins, Gary

2016-01-06

While it is widely accepted that the environment has an important role in transmission of healthcare-associated infections, there has been a paucity of empirical investigation in this area to date, and the majority of published literature relates to acute settings. People living in care homes come into contact with a communally used environment and communally used equipment daily. Equipment may include hoists, hoist slings, clinical monitoring equipment, commodes and shower chairs. In care homes, primary responsibility for decontamination lies with the healthcare team, most of whom are not nurses. The challenge for nurses working in care homes is their accountability for the provision of safe and effective care.

COMPASS: an Interoperable Personal Health System to Monitor and Compress Signals in Chronic Obstructive Pulmonary Disease

Directory of Open Access Journals (Sweden)

Thomas Hofer

2015-11-01

Full Text Available In the past years the progress on the mobile market has made possible an advancement in terms of telemedicine systems and definition of systems for monitoring chronic illnesses. The distribution of mobile devices in developed countries is increasing. Many of these devices are equipped with wireless standards including Bluetooth and the amount of sold Smartphones is constantly increasing. Our approach is oriented towards this market, using existing devices to enable in-home patient monitoring and even further to ubiquitious monitoring. The idea is to increase the quality of care, reduce costs and gather medical grade data, especially vital signs, with a resolution of minutes or even less, which is nowadays only possible in an ICU (Intensive Care Units. In this paper we will present the COMPASS personal health system (PHS platform, and how this platform enables Android devices to collect, analyze and send sensor data to an observation storage by means of interoperability standards. Furthermore, we will also present how this data can be compressed using advanced compressed sensing techniques and how to optimize these techniques with genetic algorithms to improve the RMSE of the reconstructed signal after compression. We also produce a preliminary evaluation of the algorithm against the state of the art algorithms for compressed sensing.

Design of respiration averaged CT for attenuation correction of the PET data from PET/CT

International Nuclear Information System (INIS)

Chi, Pai-Chun Melinda; Mawlawi, Osama; Nehmeh, Sadek A.; Erdi, Yusuf E.; Balter, Peter A.; Luo, Dershan; Mohan, Radhe; Pan Tinsu

2007-01-01

Our previous patient studies have shown that the use of respiration averaged computed tomography (ACT) for attenuation correction of the positron emission tomography (PET) data from PET/CT reduces the potential misalignment in the thorax region by matching the temporal resolution of the CT to that of the PET. In the present work, we investigated other approaches of acquiring ACT in order to reduce the CT dose and to improve the ease of clinical implementation. Four-dimensional CT (4DCT) data sets for ten patients (17 lung/esophageal tumors) were acquired in the thoracic region immediately after the routine PET/CT scan. For each patient, multiple sets of ACTs were generated based on both phase image averaging (phase approach) and fixed cine duration image averaging (cine approach). In the phase approach, the ACTs were calculated from CT images corresponding to the significant phases of the respiratory cycle: ACT 050phs from end-inspiration (0%) and end-expiration (50%), ACT 2070phs from mid-inspiration (20%) and mid-expiration (70%), ACT 4phs from 0%, 20%, 50% and 70%, and ACT 10phs from all ten phases, which was the original approach. In the cine approach, which does not require 4DCT, the ACTs were calculated based on the cine images from cine durations of 1 to 6 s at 1 s increments. PET emission data for each patient were attenuation corrected with each of the above mentioned ACTs and the tumor maximum standard uptake value (SUV max ), average SUV (SUV avg ), and tumor volume measurements were compared. Percent differences were calculated between PET data corrected with various ACTs and that corrected with ACT 10phs . In the phase approach, the ACT 10phs can be approximated by the ACT 4phs to within a mean percent difference of 2% in SUV and tumor volume measurements. In cine approach, ACT 10phs can be approximated to within a mean percent difference of 3% by ACTs computed from cine durations ≥3 s. Acquiring CT images only at the four significant phases for the

Variation of structures of ingredients of desiccated coconut during hydrolysis by hydrochloric acid at low temperature

Directory of Open Access Journals (Sweden)

Jian XIONG

2017-10-01

Full Text Available Abstract Owing to the high content of lignocellulose, desiccated coconut become a healthy material for dietary fiber supplementation. In this study, the changes in solubility of the fibers of desiccated coconut were evaluated. The changes of the pHs and weight losses were studied. Furthermore, variations of the ingredient structures of desiccated coconut by hydrolysis by hydrochloric acid were characterized by Fourier transform infrared spectroscopy (FTIR, X-ray diffraction (XRD and scanning electron microscopy (SEM. After hydrolysis 30 s, the pHs of all systems increased, while six hours later, the pH of only system with initial pH = 1.00 decreased. The decline of pH only existed in hydrolysis systems with initial pH = 1.00, there is no relevant with the quantities of desiccated coconut. The lower initial pH of hydrolysis system was, the less the intrinsic viscosity of the desiccated coconut after hydrolysis was, the small the crystallinity was. After hydrolysis, the microstructure of the desiccated coconut become looser, and the secondary structure of the coconut protein became more stable and ordered. The results suggest that the hydrolysis of desiccated coconut mainly occurred in the branched chain and the non-crystalline region of lignocellulose, which transforms some insoluble dietary fiber into soluble dietary fiber. This improves the nutritional value of desiccated coconut.

JOM BACA@PHS: Building Foundation for Lifelong Learning

Directory of Open Access Journals (Sweden)

Mohd Napiah Mohd Kamal

2016-01-01

Full Text Available Universiti Sains Malaysia (USM is a pioneering university that strives to empower future talent and next generation towards a sustainable knowledge transformation. Hamzah Sendut Library in supporting this effort has formed the Reading Campaign Committee with the tagline ‘Jombaca@PHS’. This committee is established to promote love for books and reading culture to Universiti Sains Malaysia (USM community in particular and society in general. The Library realizes that the expertise to manage reading materials shouldn’t be keep by its own, but rather to be shared to others in need. Since its inception in 2009, various programs have been carried out to meet the objective. Numerous programs were conducted under three main programs, namely Community Network, Exhibition and Sharing is Caring. Starting as small-scale projects, now these initiatives have shown its positive impacts especially in building foundation for lifelong learning among USM community.

Distribution of short block copolymer chains in Binary Blends of Block Copolymers Having Hydrogen Bonding

Science.gov (United States)

Kwak, Jongheon; Han, Sunghyun; Kim, Jin Kon

2014-03-01

A binary mixture of two block copolymers whose blocks are capable of forming the hydrogen bonding allows one to obtain various microdomains that could not be expected for neat block copolymer. For instance, the binary blend of symmetric polystyrene-block-poly(2-vinylpyridine) copolymer (PS-b-P2VP) and polystyrene-block-polyhydroxystyrene copolymer (PS-b-PHS) blends where the hydrogen bonding occurred between P2VP and PHS showed hexagonally packed (HEX) cylindrical and body centered cubic (BCC) spherical microdomains. To know the exact location of short block copolymer chains at the interface, we synthesized deuterated polystyrene-block-polyhydroxystyrene copolymer (dPS-b-PHS) and prepared a binary mixture with PS-b-P2VP. We investigate, via small angle X-ray scattering (SAXS) and neutron reflectivity (NR), the exact location of shorter dPS block chain near the interface of the microdomains.

77 FR 58354 - Foreign-Trade Zone 265-Conroe, TX; Notification of Proposed Production Activity, Bauer...

Science.gov (United States)

2012-09-20

..., diesel engines and related parts, hydraulic engines/motors, pumps, compressors, turbochargers, air-conditioner components, heat exchangers, filters, fire extinguishers, hydraulic jacks/hoists, parts of boring...

[Intervention of psychological and ethical professionals of human science in obstetrical morbidity and mortality conferences].

Science.gov (United States)

Clavel, B; Dupont, C; Perrotin, C; Barbier, A; Blaise Kopp, F; Gaucher, J; Branger, B; Winer, N; Lansac, J; Morin, X; Dubois, C; Deiber, M; Saliba, E; Rudigoz, R-C; Colin, C

2013-06-01

To identify the defence mechanisms manifested by medical staff which could disturb the decision making, revealed by professionals of human science (PHS) in morbidity and mortality conferences (MMC). Application of two methods of psychological intervention in MMC, conducted between March 1st, 2009 and November 30, 2010, in 20 randomized maternity among five perinatal networks: the method of inter-active problem solving targeted at the functioning of the teams and the method for developing professional practice centred on individual. The data collection was realized during analyse of case in MMC, with note-taking by two pair PHS. The oral expressions of RMM' participant were secondarily re-written, analyzed and classed by theme. Fifty-four MMC were performed. The mechanisms of defence have been identified by PHS intervention in MMC: denial of situation, pact of denegation, rift and overprotection. They were be identified by two PHS intervention methods, this consolidates these results. This intervention began staff medical to transformation at different level, in particular to improve the capacity of cooperation. The identification of the mechanisms of defence in MMC enables staff medical to improve communication and quality relationship between healthcare professionals. This could constitute an actual factor of practices improvement. However, complementary studies must be performed to confirm this hypothesis. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Cloning and expression of a sorghum gene with homology to maize vp1. Its potential involvement in pre-harvest sprouting resistance.

Science.gov (United States)

Carrari, F; Perez-Flore, L; Lijavetzky, D; Enciso, S; Sanchez, R; Benech-Arnold, R; Iusem, N

2001-04-01

Pre-harvest sprouting (PHS) in sorghum is related to the lack of a normal dormancy level during seed development and maturation. Based on previous evidence that seed dormancy in maize is controlled by the vp1 gene, we used a PCR-based approach to isolate two Sorghum bicolor genomic and cDNA clones from two genotypes exhibiting different PHS behaviour and sensitivity to abscisic acid (ABA). The two 699 amino acid predicted protein sequences differ in two residues at positions 341 (Gly or Cys within the repression domain) and 448 (Pro or Ser) and show over 80, 70 and 60% homology to maize, rice and oat VP1 proteins respectively. Expression analysis of the sorghum vp1 gene in the two lines shows a slightly higher level of vp1 mRNA in the embryos susceptible to PHS than in those resistant to PHS during embryogenesis. However, timing of expression was different between these genotypes during this developmental process. Whereas for the former the main peak of expression was observed at 20 days after pollination (DAP), the peak in the latter was found at later developmental stages when seed maturation was almost complete. Under favourable germination conditions and in the presence of fluridone (an inhibitor of ABA biosynthesis), sorghum vp1 mRNA showed to be consistently correlated with sensitivity to ABA but not with ABA content and dormancy.

Reprogramming of Seed Metabolism Facilitates Pre-harvest Sprouting Resistance of Wheat

Science.gov (United States)

Liu, Caixiang; Ding, Feng; Hao, Fuhua; Yu, Men; Lei, Hehua; Wu, Xiangyu; Zhao, Zhengxi; Guo, Hongxiang; Yin, Jun; Wang, Yulan; Tang, Huiru

2016-02-01

Pre-harvest sprouting (PHS) is a worldwide problem for wheat production and transgene antisense-thioredoxin-s (anti-trx-s) facilitates outstanding resistance. To understand the molecular details of PHS resistance, we analyzed the metabonomes of the transgenic and wild-type (control) wheat seeds at various stages using NMR and GC-FID/MS. 60 metabolites were dominant in these seeds including sugars, organic acids, amino acids, choline metabolites and fatty acids. At day-20 post-anthesis, only malate level in transgenic wheat differed significantly from that in controls whereas at day-30 post-anthesis, levels of amino acids and sucrose were significantly different between these two groups. For mature seeds, most metabolites in glycolysis, TCA cycle, choline metabolism, biosynthesis of proteins, nucleotides and fatty acids had significantly lower levels in transgenic seeds than in controls. After 30-days post-harvest ripening, most metabolites in transgenic seeds had higher levels than in controls including amino acids, sugars, organic acids, fatty acids, choline metabolites and NAD+. These indicated that anti-trx-s lowered overall metabolic activities of mature seeds eliminating pre-harvest sprouting potential. Post-harvest ripening reactivated the metabolic activities of transgenic seeds to restore their germination vigor. These findings provided essential molecular phenomic information for PHS resistance of anti-trx-s and a credible strategy for future developing PHS resistant crops.

Chitosan and Its Derivatives for Application in Mucoadhesive Drug Delivery Systems

Directory of Open Access Journals (Sweden)

Twana Mohammed M. Ways

2018-03-01

Full Text Available Mucoadhesive drug delivery systems are desirable as they can increase the residence time of drugs at the site of absorption/action, provide sustained drug release and minimize the degradation of drugs in various body sites. Chitosan is a cationic polysaccharide that exhibits mucoadhesive properties and it has been widely used in the design of mucoadhesive dosage forms. However, its limited mucoadhesive strength and limited water-solubility at neutral and basic pHs are considered as two major drawbacks of its use. Chemical modification of chitosan has been exploited to tackle these two issues. In this review, we highlight the up-to-date studies involving the synthetic approaches and description of mucoadhesive properties of chitosan and chitosan derivatives. These derivatives include trimethyl chitosan, carboxymethyl chitosan, thiolated chitosan, chitosan-enzyme inhibitors, chitosan-ethylenediaminetetraacetic acid (chitosan-EDTA, half-acetylated chitosan, acrylated chitosan, glycol chitosan, chitosan-catechol, methyl pyrrolidinone-chitosan, cyclodextrin-chitosan and oleoyl-quaternised chitosan. We have particularly focused on the effect of chemical derivatization on the mucoadhesive properties of chitosan. Additionally, other important properties including water-solubility, stability, controlled release, permeation enhancing effect, and in vivo performance are also described.

Application of PLC to mine hoist

International Nuclear Information System (INIS)

Zheng Liquan

2003-01-01

This paper describes the reform of the hoister JMK 1.85 x 4 (B) with programmable logic controller (PLC), introduces hardware architecture, software architecture and interference protection measures, and presents the existential problems and suggestions for improvement

Creating training opportunities for public health practitioners.

Science.gov (United States)

Greene, D; Healton, C; Hamburg, M; Rosenfield, A; Cagan, E; Van Wie, W; Haviland, M L

1999-04-01

In response to several reports issued by the federal government and private foundations on the under-training of public health practitioners, Joseph L. Mailman School of Public Health of Columbia University (SPH) and the New York City Department of Health (NYC DOH) initiated the Public Health Scholars program (SPH-PHS) to make degree-level public health training available to NYC DOH employees. Public Health Scholars receive a 50% tuition scholarship and enroll part-time while working full-time at NYC DOH. Sixteen scholars have enrolled during the past three years. The SPH-PHS program is considered a success by both SPH and NYC DOH. This article details the history of the collaboration between the two agencies and the structure of the program and provides a critical analysis of the SPH-PHS program based on interviews with 16 scholars. It also examines the cost and benefit to other schools of public health of implementing such a program.

The Influence of Overhead Cranes in the Seismic Performance of Industrial Buildings

Directory of Open Access Journals (Sweden)

Andrea Belleri

2017-11-01

Full Text Available This paper investigates the influence of overhead cranes with a hanging mass under earthquake type loading, considering the Emilia 2012 seismic sequence. The structural layout of precast concrete industrial buildings typical of the Italian territory is considered. The equations of motion describing the behavior of the hoist load are derived, and a sensitivity analysis is carried out on simplified 3 degrees of freedom systems by solving the governing differential equations. The influence of various parameters on the roof displacement and on the horizontal load transferred by the hanging mass is addressed. The considered parameters are the relative damping of the hanging mass, the length of the hoist ropes, the earthquake record, the hysteretic type of the plastic hinges at the column base, and the behavior factor of the structural system. The results show that for a horizontal component of the considered seismic sequence the structural displacements are amplified in the case of a behavior factor greater than 2.5. A simplified modeling strategy considering small displacements is also investigated. Such model is suitable for response-spectrum analyses. Finally, a three-dimensional case study is analyzed by means of non-linear time history analyses. The results show the influence of the overhead crane on the local performance of some structural and non-structural elements, such as columns and cladding panels, especially when the assumption of rigid roof diaphragm does not apply.

Comparative Study of Electric Energy Storages and Thermal Energy Auxiliaries for Improving Wind Power Integration in the Cogeneration System

Directory of Open Access Journals (Sweden)

Yanjuan Yu

2018-01-01

Full Text Available In regards to the cogeneration system in Northern China, mainly supported by combined heat and power (CHP plants, it usually offers limited operation flexibility due to the joint production of electric and thermal power. For that large-scale wind farms included in the cogeneration system, a large amount of wind energy may have to be wasted. To solve this issue, the utilization of the electric energy storages and the thermal energy auxiliaries are recommended, including pumped hydro storage (PHS, compressed air energy storage (CAES, hydrogen-based energy storage (HES, heat storage (HS, electric boilers (EB, and heat pumps (HP. This paper proposes a general evaluation method to compare the performance of these six different approaches for promoting wind power integration. In consideration of saving coal consumption, reducing CO2 emissions, and increasing investment cost, the comprehensive benefit is defined as the evaluation index. Specifically, a wind-thermal conflicting expression (WTCE is put forward to simplify the formulation of the comprehensive benefit. Further, according to the cogeneration system of the West Inner Mongolia (WIM power grid, a test system is modelled to perform the comparison of the six different approaches. The results show that introducing the electric energy storages and the thermal energy auxiliaries can both contribute to facilitating wind power integration, and the HP can provide the best comprehensive benefit.

QTL analysis of falling number and seed longevity in wheat (Triticum aestivum L.).

Science.gov (United States)

Börner, Andreas; Nagel, Manuela; Agacka-Mołdoch, Monika; Gierke, Peter Ulrich; Oberforster, Michael; Albrecht, Theresa; Mohler, Volker

2018-02-01

Pre-harvest sprouting (PHS) and seed longevity (SL) are complex biological processes of major importance for agricultural production. In the present study, a recombinant inbred line (RIL) population derived from a cross between the German winter wheat (Triticum aestivum L.) cultivars History and Rubens was used to identify genetic factors controlling these two physiological seed traits. A falling number (FN) test was employed to evaluate PHS, while SL was measured using a germination test (and the speed of germination) after controlled deterioration. FN of the population was assessed in four environments; SL traits were measured in one environment. Four major quantitative trait loci (QTL) for FN were detected on chromosomes 4D, 5A, 5D, and 7B, whereas for SL traits, a major QTL was found on chromosome 1A. The FN QTL on chromosome 4D that coincided with the position of the dwarfing gene Rht-D1b only had effects in environments that were free of PHS. The remaining three QTL for FN were mostly pronounced under conditions conducive to PHS. The QTL on the long arm of chromosome 7B corresponded to the major gene locus controlling late maturity α-amylase (LMA) in wheat. The severity of the LMA phenotype became truly apparent under sprouting conditions. The position on the long arm of chromosome 1A of the QTL for SL points to a new QTL for this important regenerative seed trait.

Rates of proton transfer to Fe-S-based clusters: comparison of clusters containing {MFe(mu(2)-S)(2)}n+ and {MFe(3)(mu(3)-S)(4)}n+ (M = Fe, Mo, or W) cores.

Science.gov (United States)

Bates, Katie; Garrett, Brendan; Henderson, Richard A

2007-12-24

The rates of proton transfer from [pyrH]+ (pyr = pyrrolidine) to the binuclear complexes [Fe2S2Cl4]2- and [S2MS2FeCl2]2- (M = Mo or W) are reported. The reactions were studied using stopped-flow spectrophotometry, and the rate constants for proton transfer were determined from analysis of the kinetics of the substitution reactions of these clusters with the nucleophiles Br- or PhS- in the presence of [pyrH]+. In general, Br- is a poor nucleophile for these clusters, and proton transfer occurs before Br- binds, allowing direct measure of the rate of proton transfer from [pyrH]+ to the cluster. In contrast, PhS- is a better nucleophile, and a pathway in which PhS- binds preferentially to the cluster prior to proton transfer from [pyrH]+ usually operates. For the reaction of [Fe2S2Cl4]2- with PhS- in the presence of [pyrH]+ both pathways are observed. Comparison of the results presented in this paper with analogous studies reported earlier on cuboidal Fe-S-based clusters allows discussion of the factors which affect the rates of proton transfer in synthetic clusters including the nuclearity of the cluster core, the metal composition, and the nature of the terminal ligands. The possible relevance of these findings to the protonation sites of natural Fe-S-based clusters, including FeMo-cofactor from nitrogenase, are presented.

Lifting system and apparatus for constructing wind turbine towers

Science.gov (United States)

Livingston, Tracy; Schrader, Terry; Goldhardt, James; Lott, James

2011-02-01

The disclosed invention is utilized for mounting a wind turbine and blade assembly on the upper end of a wind turbine tower. The invention generally includes a frame or truss that is pivotally secured to the top bay assembly of the tower. A transverse beam is connected to the frame or truss and extends fore of the tower when the frame or truss is in a first position and generally above the tower when in a second position. When in the first position, a wind turbine or blade assembly can be hoisted to the top of the tower. The wind turbine or blade assembly is then moved into position for mounting to the tower as the frame or truss is pivoted to a second position. When the turbine and blade assembly are secured to the tower, the frame or truss is disconnected from the tower and lowered to the ground.

76 FR 46300 - Food and Drug Administration Modernization Act of 1997: Modifications to the List of Recognized...

Science.gov (United States)

2011-08-02

... 62366:2007. engineering to medical devices. D. General Hospital/General Plastic Surgery: 6-253 Hoists... CLSI H59-A. Thromboembolic Disease; Approved Guideline. F. Nanotechnology: 18-2 Standard Guide for...

Carbonate mineral solubility at low temperatures in the Na-K-Mg-Ca-H-Cl-SO 4-OH-HCO 3-CO 3-CO 2-H 2O system

Science.gov (United States)

Marion, Giles M.

2001-06-01

Carbonate minerals have played an important role in the geochemical evolution of Earth, and may have also played an important role in the geochemical evolution of Mars and Europa. Several models have been published in recent years that describe chloride and sulfate mineral solubilities in concentrated brines using the Pitzer equations. Few of these models are parameterized for subzero temperatures, and those that are do not include carbonate chemistry. The objectives of this work are to estimate Pitzer-equation bicarbonate-carbonate parameters and carbonate mineral solubility products and to incorporate them into the FREZCHEM model to predict carbonate mineral solubilities in the Na-K-Mg-Ca-H-Cl-SO 4-OH-HCO 3-CO 3-CO 2-H 2O system at low temperatures (≤25°C) with a special focus on subzero temperatures. Most of the Pitzer-equation parameters and equilibrium constants are taken from the literature and extrapolated into the subzero temperature range. Solubility products for 14 sodium, potassium, magnesium, and calcium bicarbonate and carbonate minerals are included in the model. Most of the experimental data are at temperatures ≥ -8°C; only for the NaHCO 3-NaCl-H 2O and Na 2CO 3-NaCl-H 2O systems are there bicarbonate and carbonate data to temperatures as low as -21.6°C. In general, the fit of the model to the experimental data is good. For example, calculated eutectic temperatures and compositions for NaHCO 3, Na 2CO 3, and their mixtures with NaCl and Na 2SO 4 salts are in good agreement with experimental data to temperatures as low as -21.6°C. Application of the model to eight saline, alkaline carbonate waters give predicted pHs ranging from 9.2 to 10.2, in comparison with measured pHs that range from 8.7 to 10.2. The model suggests that the CaCO 3 mineral that precipitates during seawater freezing is probably calcite and not ikaite. The model demonstrates that a proposed salt assemblage for the icy surface of Europa consisting of highly hydrated MgSO 4

Investigation and mapping of the requirements for lifting devices in a nuclear facility; Utredning och kartlaeggning av krav foer lyftanordningar inom kaernteknisk anlaeggning

Energy Technology Data Exchange (ETDEWEB)

Andersson, Kjell (Inspecta Sweden AB, Vaexjoe (Sweden))

2010-03-15

This technical report covers the investigation and identification of requirements for lifting devices in nuclear facilities. The report is divided into the following Section: 1. A mapping of the regulatory framework for nuclear hoists in Finland, Germany and USA. 2. A description of how the international legal framework is applied in for replacement or modernization of lifts in the Swedish nuclear power plants. 3. In Europe, the new harmonized standard has been developed for conventional hoists. The rules appear in the 'EN-13 001'. The study will illustrate these rules, and how they currently apply in the nuclear industry in Sweden. 4. A comparison between the IKH's lifting standards and EN13001 which differences are highlighted and explained

Direct ultimate disposal of spent fuel. Simulation of shaft transport. Study of rope slippage (TA 10)

International Nuclear Information System (INIS)

Filbert, W.; Weber, H.; Gerlach, A.; Sindern, W.

1994-03-01

The test results show that rope slippage does occur occasionally in Koepe hoists, mainly with hinged loads. The countermeasures chosen in most cases include modification of the rope lubrication (coefficient of friction), of load ratios S 1 /S 2 , (ballast, reduction of payload), or organisational measures (maintenance). Results and data are reported giving evidence that with the proposed, additional measures for preventing or managing rope slippage, the designed Koepe hoist for hinged payloads up to 85 t can be operated safely without risk of damage caused by rope slippage. It is also proven that there is no need to change ballast in case of transport of varying payloads, as this will not create the risk of undue rope slippage. (orig./HP) [de

Engineering high α-amylase levels in wheat grain lowers Falling Number but improves baking properties.

Science.gov (United States)

Ral, Jean-Philippe; Whan, Alex; Larroque, Oscar; Leyne, Emmett; Pritchard, Jeni; Dielen, Anne-Sophie; Howitt, Crispin A; Morell, Matthew K; Newberry, Marcus

2016-01-01

Late maturity α-amylase (LMA) and preharvest sprouting (PHS) are genetic defects in wheat. They are both characterized by the expression of specific isoforms of α-amylase in particular genotypes in the grain prior to harvest. The enhanced expression of α-amylase in both LMA and PHS results in a reduction in Falling Number (FN), a test of gel viscosity, and subsequent downgrading of the grain, along with a reduced price for growers. The FN test is unable to distinguish between LMA and PHS; thus, both defects are treated similarly when grain is traded. However, in PHS-affected grains, proteases and other degradative process are activated, and this has been shown to have a negative impact on end product quality. No studies have been conducted to determine whether LMA is detrimental to end product quality. This work demonstrated that wheat in which an isoform α-amylase (TaAmy3) was overexpressed in the endosperm of developing grain to levels of up to 100-fold higher than the wild-type resulted in low FN similar to those seen in LMA- or PHS-affected grains. This increase had no detrimental effect on starch structure, flour composition and enhanced baking quality, in small-scale 10-g baking tests. In these small-scale tests, overexpression of TaAmy3 led to increased loaf volume and Maillard-related browning to levels higher than those in control flours when baking improver was added. These findings raise questions as to the validity of the assumption that (i) LMA is detrimental to end product quality and (ii) a low FN is always indicative of a reduction in quality. This work suggests the need for a better understanding of the impact of elevated expression of specific α-amylase on end product quality. © 2015 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

Right at the top; Hoch hinaus

Energy Technology Data Exchange (ETDEWEB)

Kohl, Stefan

2010-10-15

Cranes and hoists for construction and maintenance of offshore wind turbines are a booming market. Demand is still growing, and the machinery is getting bigger and more efficient all the time. (orig.)

Close-fitting shield doors with sculptured edges

International Nuclear Information System (INIS)

Goodman, L.

1986-01-01

The US Department of Energy has contracted with Fluor Technology, Inc. for design and engineering of a facility to begin reprocessing fuel from the reactors at Hanford, Washington. Within the facility, a 15-cm (6-in.)-thick, steel shield door is needed to close an opening 4.3 m (14 ft) high x 8.2 m (27 ft) wide. Two cranes and a centrally located monorail hoist must pass through the opening. The door weighs about 41,000 kg (45 ton), and passage of the hoist will be the most frequent cause for opening the door. These two factors essentially mandated a three-piece door, which allows for using commercially available chain hoists to raise and lower the individual door sections. Normally, there is a 187-Pa (0.75-in. water gauge) pressure differential across the door, and minimal air leakage is essential. Stepped, mating edges between sections and along the adjacent concrete structures are typical with such doors, but so are significant gaps (and air leaks) around the edges. Gaps are needed to preclude frictional jamming between edges as a section is lowered. The challenge was to conceive a method to produce near-zero gaps and preclude jamming without involving impractically tight tolerances. The chosen method was to place trapezoidally shaped, steel gaskets on the door-section edges and on the mating concrete surfaces. The concept is described

Acceptance test report, 241-SY-101 Flexible Receiver System, Phase 2 testing

International Nuclear Information System (INIS)

Ritter, G.A.

1995-01-01

This document summarizes the results of the Phase 2 acceptance test of the 241-SY-101 Flexible Receiver System (FRS). The FRS is one of six major components of the Equipment Removal System, which has been designed to retrieve, transport, and store the test mixer pump currently installed in Tank 241-SY-101. The purpose of this acceptance test is to verify the strength of the containment bag and bag bottom cinching mechanism. It is postulated that 68 gallons of waste could be trapped inside the pump internals. The bag must be capable of supporting this waste if it shakes loose and drains to the bottom of the bag after the bag bottom has been cinched closed. This acceptance test was performed at the Maintenance and Storage Facility (MASF) Facility in the 400 area on January 23, 1995. The bag assembly supported the weight of 920 kg (2,020 lbs) of water with no leakage or damage to the bag. This value meets the acceptance criteria of 910 kg of water and therefore the results were found to be acceptable. The maximum volume of liquid expected to be held up in the pump internals is 258 L (68 gallons), which corresponds to 410 kg. This test weight gives just over a safety factor of 2. The bag also supported a small shock load while it was filled with water when the crane hoisted the bag assembly up and down. Based on the strength rating of the bag components, the bag assembly should support 2--3 times the test weight of 910 kg

Monoterpenes in the glandular trichomes of tomato are synthesized from a neryl diphosphate precursor rather than geranyl diphosphate.

Science.gov (United States)

Schilmiller, Anthony L; Schauvinhold, Ines; Larson, Matthew; Xu, Richard; Charbonneau, Amanda L; Schmidt, Adam; Wilkerson, Curtis; Last, Robert L; Pichersky, Eran

2009-06-30

We identified a cis-prenyltransferase gene, neryl diphosphate synthase 1 (NDPS1), that is expressed in cultivated tomato (Solanum lycopersicum) cultivar M82 type VI glandular trichomes and encodes an enzyme that catalyzes the formation of neryl diphosphate from isopentenyl diphosphate and dimethylallyl diphosphate. mRNA for a terpene synthase gene, phellandrene synthase 1 (PHS1), was also identified in these glands. It encodes an enzyme that uses neryl diphosphate to produce beta-phellandrene as the major product as well as a variety of other monoterpenes. The profile of monoterpenes produced by PHS1 is identical with the monoterpenes found in type VI glands. PHS1 and NDPS1 map to chromosome 8, and the presence of a segment of chromosome 8 derived from Solanum pennellii LA0716 causes conversion from the M82 gland monoterpene pattern to that characteristic of LA0716 plants. The data indicate that, contrary to the textbook view of geranyl diphosphate as the "universal" substrate of monoterpene synthases, in tomato glands neryl diphosphate serves as a precursor for the synthesis of monoterpenes.

Generation and Characterization of Environmentally Sensitive Variants of the β-Galactosidase from Lactobacillus delbrueckii subsp. bulgaricus

Science.gov (United States)

Yoast, Sienna; Adams, Robin M.; Mainzer, Stanley E.; Moon, Keith; Palombella, Anthony L.; Schmidt, Brian F.

1994-01-01

A method is described for generating and screening variants of the β-galactosidase from Lactobacillus delbrueckii subsp. bulgaricus sensitive to several environmental stresses, with potential application in the food industry. Chemical mutagenesis with hydroxylamine or methoxylamine was performed on the β-galactosidase gene carried on an Escherichia coli expression vector. Mutants sensitive to cold, heat, low pH, low magnesium concentration, and the presence of urea were isolated by screening for reduced color development on β-galactosidase indicator plates. The mutations responsible for three variant β-galactosidases were localized, and the base substitutions were determined by DNA sequencing. The amino acid alterations associated with one low-pH-sensitive (pHs) and two urea-sensitive (Us) variants correspond to P584L (pHs1), G400S/R479Q (Us26), and G167E/E168K/E363K/V492M (Us17), respectively. Mutant pHs1 is also heat, cold, low magnesium, and urea sensitive; Us26 is also cold sensitive; and Us17 is also low-pH sensitive. PMID:16349230

Program grants for black lung clinics--PHS. Final rule.

Science.gov (United States)

1985-02-27

The Public Health Service hereby revises the regulations governing the grants program for black lung clinics established under section 427(a) of the Federal Mine Safety and Health Act of 1977. The revision is in keeping with the Department of Health and Human Services' desire to remove as many programmatic burdens and restrictions from grantees as possible, while maintaining program integrity.

42 CFR 93.220 - Public Health Service or PHS.

Science.gov (United States)

2010-10-01

... for Toxic Substances and Disease Registry, Centers for Disease Control and Prevention, Food and Drug... Health, and the Substance Abuse and Mental Health Services Administration, and the offices of the...

Genetic architecture of a hormonal response to gene knockdown in honey bees.

Science.gov (United States)

Ihle, Kate E; Rueppell, Olav; Huang, Zachary Y; Wang, Ying; Fondrk, M Kim; Page, Robert E; Amdam, Gro V

2015-01-01

Variation in endocrine signaling is proposed to underlie the evolution and regulation of social life histories, but the genetic architecture of endocrine signaling is still poorly understood. An excellent example of a hormonally influenced set of social traits is found in the honey bee (Apis mellifera): a dynamic and mutually suppressive relationship between juvenile hormone (JH) and the yolk precursor protein vitellogenin (Vg) regulates behavioral maturation and foraging of workers. Several other traits cosegregate with these behavioral phenotypes, comprising the pollen hoarding syndrome (PHS) one of the best-described animal behavioral syndromes. Genotype differences in responsiveness of JH to Vg are a potential mechanistic basis for the PHS. Here, we reduced Vg expression via RNA interference in progeny from a backcross between 2 selected lines of honey bees that differ in JH responsiveness to Vg reduction and measured JH response and ovary size, which represents another key aspect of the PHS. Genetic mapping based on restriction site-associated DNA tag sequencing identified suggestive quantitative trait loci (QTL) for ovary size and JH responsiveness. We confirmed genetic effects on both traits near many QTL that had been identified previously for their effect on various PHS traits. Thus, our results support a role for endocrine control of complex traits at a genetic level. Furthermore, this first example of a genetic map of a hormonal response to gene knockdown in a social insect helps to refine the genetic understanding of complex behaviors and the physiology that may underlie behavioral control in general. © The American Genetic Association. 2015.

JWST Lifting System

Science.gov (United States)

Tolleson, William

2012-01-01

A document describes designing, building, testing, and certifying a customized crane (Lifting Device LD) with a strong back (cradle) to facilitate the installation of long wall panels and short door panels for the GHe phase of the James Webb Space Telescope (JWST). The LD controls are variable-frequency drive controls designed to be adjustable for very slow and very-short-distance movements throughout the installation. The LD has a lift beam with an electric actuator attached at the end. The actuator attaches to a rectangular strong back (cradle) for lifting the long wall panels and short door panels from a lower angle into the vertical position inside the chamber, and then rotating around the chamber for installation onto the existing ceiling and floor. The LD rotates 360 (in very small increments) in both clockwise and counterclockwise directions. Eight lifting pads are on the top ring with 2-in. (.5-cm) eye holes spaced evenly around the ring to allow for the device to be suspended by three crane hoists from the top of the chamber. The LD is operated by remote controls that allow for a single, slow mode for booming the load in and out, with slow and very slow modes for rotating the load.

46 CFR 163.002-13 - Construction.

Science.gov (United States)

2010-10-01

... a spreader is provided, it must be at least 1800 millimeters (5 feet, 10 inches) long. (c) Rollers... sharp edges and projections of excessive length. A pilot hoist must not have nonfunctional sharp edges...

Knowledge-Based Personal Health System to empower outpatients of diabetes mellitus by means of P4 Medicine.

Science.gov (United States)

Bresó, Adrián; Sáez, Carlos; Vicente, Javier; Larrinaga, Félix; Robles, Montserrat; García-Gómez, Juan Miguel

2015-01-01

Diabetes Mellitus (DM) affects hundreds of millions of people worldwide and it imposes a large economic burden on healthcare systems. We present a web patient empowering system (PHSP4) that ensures continuous monitoring and assessment of the health state of patients with DM (type I and II). PHSP4 is a Knowledge-Based Personal Health System (PHS) which follows the trend of P4 Medicine (Personalized, Predictive, Preventive, and Participative). It provides messages to outpatients and clinicians about the achievement of objectives, follow-up, and treatments adjusted to the patient condition. Additionally, it calculates a four-component risk vector of the associated pathologies with DM: Nephropathy, Diabetic retinopathy, Diabetic foot, and Cardiovascular event. The core of the system is a Rule-Based System which Knowledge Base is composed by a set of rules implementing the recommendations of the American Diabetes Association (ADA) (American Diabetes Association: http://www.diabetes.org/ ) clinical guideline. The PHSP4 is designed to be standardized and to facilitate its interoperability by means of terminologies (SNOMED-CT [The International Health Terminology Standards Development Organization: http://www.ihtsdo.org/snomed-ct/ ] and UCUM [The Unified Code for Units of Measure: http://unitsofmeasure.org/ ]), standardized clinical documents (HL7 CDA R2 [Health Level Seven International: http://www.hl7.org/index.cfm ]) for managing Electronic Health Record (EHR). We have evaluated the functionality of the system and its users' acceptance of the system using simulated and real data, and a questionnaire based in the Technology Acceptance Model methodology (TAM). Finally results show the reliability of the system and the high acceptance of clinicians.

Lactitol, a second-generation disaccharide for treatment of chronic portal-systemic encephalopathy. A double-blind, crossover, randomized clinical trial.

Science.gov (United States)

Uribe, M; Toledo, H; Perez, F; Vargas, F; Gil, S; Garcia-Ramos, G; Ravelli, G P; Guevara, L

1987-12-01

A double-blind crossover trial was performed to test the therapeutic usefulness and safety of lactitol, a beta-galactoside sorbitol, against lactose in 18 patients with chronic portal-systemic encephalopathy (PSE). The study included four periods: two for washout and two for lactitol and lactose administration. During washout periods, which lasted two weeks each, patients were stabilized with neomycin plus milk of magnesia. Lactitol and lactose were administered during four weeks each. Ten patients were randomly assigned to receive lactose (group A) and eight patients to receive lactitol (group B) first. PSE parameters, ie, mental state, number connection test performance, asterixis and blood ammonia levels were assessed fortnightly. Electroencephalographic tracings and stool pHs were evaluated at the end of each study period. After the first administration of lactose and lactitol, no statistically significant differences in PSE parameters were found. At the same stage, a significant stool acidification (P less than 0.05) was detected. It is concluded that lactitol seems to be safe and efficacious in treating patients with chronic PSE.

Asbestos fiber release from the brake pads of overhead industrial cranes.

Science.gov (United States)

Spencer, J W; Plisko, M J; Balzer, J L

1999-06-01

The purpose of this evaluation was to determine the actual contribution of airborne asbestos fibers to the work environment from the operation of overhead cranes and hoists that use asbestos composition brake pads. The evaluation was conducted in a working manufacturing facility. Other potential sources of asbestos were accounted for by visual inspection and background air monitoring. An overhead crane assembly comprised of a trolley and two hoists was employed for this study. The crane was operated for two consecutive eight-hour shifts representative of a heavy-duty cycle. Forty-four personal and area air samples were collected during the assessment. Asbestos fibers were analyzed for by phase contrast (NIOSH 7400), and transmission electron (NIOSH 7402) microscopy methods. Eight-hour time-weighted average (TWA) asbestos fiber concentrations ranged from cranes.

Direct disposal of spent fuel. Simulation of shaft transport. Phase III. Final report

International Nuclear Information System (INIS)

Filbert, W.; Heda, M.; Khamis, M.; Neydek, J.; Niehues, N.; Rissel, J.; Schrimpf, C.; Weber, W.; Fuchs, D.; Gerlach, A.; Langebrake, F.; Sindern, W.; Gasch, A.; Leicht, R.; Schwab, B.; Hecke, R. van; Kipka, P.; Simmich, K.; Weber, H.

1994-01-01

The aim of these demonstration tests was to verify the technical feasibility of a shaft hoisting equipment with a payload of 85 t as well as the safe transport of POLLUX-casks. In phase III of the project the components and the test stand were built, their proper functioning and reliability were tested to demonstrate that they are state-of-the-art. The following additional investigations were carried out: - Tests to fix operational disturbances and simulation tests for the new components to demonstrate their licensibility -Selection and lifetime tests of ropes and investigation of the present state-of-the-art of rope slighting under the conditions of the conceptual design of the shaft hoisting facility - Execution of a probabilistic safety analysis e.g. the determination of the release of radioactive material (result: probability [de

Airborne electromagnetic detection of shallow seafloor topographic features, including resolution of multiple sub-parallel seafloor ridges

Science.gov (United States)

Vrbancich, Julian; Boyd, Graham

2014-05-01

The HoistEM helicopter time-domain electromagnetic (TEM) system was flown over waters in Backstairs Passage, South Australia, in 2003 to test the bathymetric accuracy and hence the ability to resolve seafloor structure in shallow and deeper waters (extending to ~40 m depth) that contain interesting seafloor topography. The topography that forms a rock peak (South Page) in the form of a mini-seamount that barely rises above the water surface was accurately delineated along its ridge from the start of its base (where the seafloor is relatively flat) in ~30 m water depth to its peak at the water surface, after an empirical correction was applied to the data to account for imperfect system calibration, consistent with earlier studies using the same HoistEM system. A much smaller submerged feature (Threshold Bank) of ~9 m peak height located in waters of 35 to 40 m depth was also accurately delineated. These observations when checked against known water depths in these two regions showed that the airborne TEM system, following empirical data correction, was effectively operating correctly. The third and most important component of the survey was flown over the Yatala Shoals region that includes a series of sub-parallel seafloor ridges (resembling large sandwaves rising up to ~20 m from the seafloor) that branch out and gradually decrease in height as the ridges spread out across the seafloor. These sub-parallel ridges provide an interesting topography because the interpreted water depths obtained from 1D inversion of TEM data highlight the limitations of the EM footprint size in resolving both the separation between the ridges (which vary up to ~300 m) and the height of individual ridges (which vary up to ~20 m), and possibly also the limitations of assuming a 1D model in areas where the topography is quasi-2D/3D.

Modeling and advanced sliding mode controls of crawler cranes considering wire rope elasticity and complicated operations

Science.gov (United States)

Tuan, Le Anh; Lee, Soon-Geul

2018-03-01

In this study, a new mathematical model of crawler cranes is developed for heavy working conditions, with payload-lifting and boom-hoisting motions simultaneously activated. The system model is built with full consideration of wind disturbances, geometrical nonlinearities, and cable elasticities of cargo lifting and boom luffing. On the basis of this dynamic model, three versions of sliding mode control are analyzed and designed to control five system outputs with only two inputs. When used in complicated operations, the effectiveness of the controllers is analyzed using analytical investigation and numerical simulation. Results indicate the effectiveness of the control algorithms and the proposed dynamic model. The control algorithms asymptotically stabilize the system with finite-time convergences, remaining robust amid disturbances and parametric uncertainties.

Genetic assessment of age-associated Alzheimer disease risk: Development and validation of a polygenic hazard score.

Directory of Open Access Journals (Sweden)

Rahul S Desikan

2017-03-01

Full Text Available Identifying individuals at risk for developing Alzheimer disease (AD is of utmost importance. Although genetic studies have identified AD-associated SNPs in APOE and other genes, genetic information has not been integrated into an epidemiological framework for risk prediction.Using genotype data from 17,008 AD cases and 37,154 controls from the International Genomics of Alzheimer's Project (IGAP Stage 1, we identified AD-associated SNPs (at p < 10-5. We then integrated these AD-associated SNPs into a Cox proportional hazard model using genotype data from a subset of 6,409 AD patients and 9,386 older controls from Phase 1 of the Alzheimer's Disease Genetics Consortium (ADGC, providing a polygenic hazard score (PHS for each participant. By combining population-based incidence rates and the genotype-derived PHS for each individual, we derived estimates of instantaneous risk for developing AD, based on genotype and age, and tested replication in multiple independent cohorts (ADGC Phase 2, National Institute on Aging Alzheimer's Disease Center [NIA ADC], and Alzheimer's Disease Neuroimaging Initiative [ADNI], total n = 20,680. Within the ADGC Phase 1 cohort, individuals in the highest PHS quartile developed AD at a considerably lower age and had the highest yearly AD incidence rate. Among APOE ε3/3 individuals, the PHS modified expected age of AD onset by more than 10 y between the lowest and highest deciles (hazard ratio 3.34, 95% CI 2.62-4.24, p = 1.0 × 10-22. In independent cohorts, the PHS strongly predicted empirical age of AD onset (ADGC Phase 2, r = 0.90, p = 1.1 × 10-26 and longitudinal progression from normal aging to AD (NIA ADC, Cochran-Armitage trend test, p = 1.5 × 10-10, and was associated with neuropathology (NIA ADC, Braak stage of neurofibrillary tangles, p = 3.9 × 10-6, and Consortium to Establish a Registry for Alzheimer's Disease score for neuritic plaques, p = 6.8 × 10-6 and in vivo markers of AD neurodegeneration (ADNI

78 FR 60900 - Kiewit Power Constructors Co. et al. (Avalotis Corp., Bowen Engineering Corporation, Commonwealth...

Science.gov (United States)

2013-10-02

... from falling. Kiewit would use a headache ball, located on the hoist rope directly above the load, to... prevent a slack-rope condition. The condition will limit stress on the rope caused by snaps, thereby...

78 FR 17432 - Kiewit Power Constructors Co. et al.; Application for a Permanent Variance and Request for Comments

Science.gov (United States)

2013-03-21

... prevent the load from falling. Kiewit would use a headache ball, located on the hoist rope directly above... prevent a slack rope condition. The proposed condition will limit stress on the rope caused by snaps...

Modeling surface area to volume effects on borosilicate glass dissolution

International Nuclear Information System (INIS)

Bourcier, W.L.; Ebert, W.L.; Feng, X.

1992-11-01

We simulated the reaction of SRL-131 glass with equilibrated J-13 water in order to investigate the effects of surface area to volume ratio (SA/V) on glass dissolution. We show that glass-fluid ion exchange causes solution pH to rise to progressively higher values as SA/V increases. Because the ion exchange is rapid relative to the duration of the glass dissolution experiment, the pH effect does not scale with (SA/V)*time. Experiments compared at the same (SA/V)*time value therefore have different pHs, with higher pHs at higher SA/V ratios. Both experimental data and our simulation results show similar trends of increasing reaction rate as a function of SA/V ratio when scaled to (SA/V)*time. Glasses which react in systems of differing SA/V ratio therefore follow different reaction paths and high SA/V ratios cannot be used to generate data which accurately scales to long time periods unless the ion exchange effect is taken into account. We suggest some simple test designs which enable more reliable high. SA/V accelerated tests

Analysis of queuing mine-cars affecting shaft station radon concentrations in Quzhou uranium mine, eastern China

Directory of Open Access Journals (Sweden)

Changshou Hong

2018-04-01

Full Text Available Shaft stations of underground uranium mines in China are not only utilized as waiting space for loaded mine-cars queuing to be hoisted but also as the principal channel for fresh air taken to working places. Therefore, assessment of how mine-car queuing processes affect shaft station radon concentration was carried out. Queuing network of mine-cars has been analyzed in an underground uranium mine, located in Quzhou, Zhejiang province of Eastern China. On the basis of mathematical analysis of the queue network, a MATLAB-based quasi-random number generating program utilizing Monte-Carlo methods was worked out. Extensive simulations were then implemented via MATALB operating on a DELL PC. Thereafter, theoretical calculations and field measurements of shaft station radon concentrations for several working conditions were performed. The queuing performance measures of interest, like average queuing length and waiting time, were found to be significantly affected by the utilization rate (positively correlated. However, even with respect to the “worst case”, the shaft station radon concentration was always lower than 200 Bq/m3. The model predictions were compared with the measuring results, and a satisfactory agreement was noted. Under current working conditions, queuing-induced variations of shaft station radon concentration of the study mine are not remarkable. Keywords: Hoist and Transport Systems, Mine-cars, Queuing Simulation, Radon Concentration, Underground Uranium Mine

Conceptual metaphors in South African political speeches (1994 ...

African Journals Online (AJOL)

KATEVG

The widely discussed conceptual metaphor POLITICS IS WAR, for example, surfaces ..... By conceptualising democracy as a child or person people perceive it as something which .... hoist the racist and sexist standards of the pasttm01b ...

Compressed Gas Safety for Experimental Fusion Facilities

Energy Technology Data Exchange (ETDEWEB)

Lee C. Cadwallader

2004-09-01

Experimental fusion facilities present a variety of hazards to the operators and staff. There are unique or specialized hazards, including magnetic fields, cryogens, radio frequency emissions, and vacuum reservoirs. There are also more general industrial hazards, such as a wide variety of electrical power, pressurized air, and cooling water systems in use, there are crane and hoist loads, working at height, and handling compressed gas cylinders. This paper outlines the projectile hazard assoicated with compressed gas cylinders and mthods of treatment to provide for compressed gas safety. This information should be of interest to personnel at both magnetic and inertial fusion experiments.

Department of the Air Force Justification of Estimates for Fiscal Year 1981, Submitted to Congress January 1980, Aircraft Procurement, Air Force, Missile Procurement, Air Force, Other Procurement, Air Force.

Science.gov (United States)

1980-01-01

10-0 6 EL4 -022 8L LLý 0 0 a 0 CLcc - 3 E CL 0 ;i *1 XO go10 ,* . , -8 rt -C CL.* L. OLc L ’i go 0 0 0 L +1%- 00 00I :) I.- I - - 51 .0 Cc a,,0 c0...of Test Cells M34 and M35. The bldg will be a prefabri- cated steel structure with several work stations. The work stations will have hoist systems...mate/demate the engine to its mount. The work stations will incorporate cell type interfaces for a limited checkout of engine in- strumentation. These

29 CFR 1926.753 - Hoisting and rigging.

Science.gov (United States)

2010-07-01

... inspection shall include the following: (A) All control mechanisms for maladjustments; (B) Control and drive mechanism for excessive wear of components and contamination by lubricants, water or other foreign matter... pressurized lines for deterioration or leakage, particularly those which flex in normal operation; (E) Hooks...

Procedure for determining the optimum rate of increasing shaft depth

Energy Technology Data Exchange (ETDEWEB)

Durov, E.M.

1983-03-01

Presented is an economic analysis of increasing shaft depth during mine modernization. Investigations carried out by the Yuzhgiproshakht Institute are analyzed. The investigations are aimed at determining the optimum shaft sinking rate (the rate which reduces investment to the minimum). The following factors are considered: coal output of a mine (0.9, 1.2, 1.5 and 1.8 Mt/year), depth at which the new mining level is situated (600, 800, 1200, 1400 and 1600 m), four schemes of increasing depth of 2 central shafts (rock hoisting to ground surface, rock hoisting to the existing level, rock haulage to the developed level, rock haulage to the level being developed using a large diameter borehole drilled from the new level to the shaft bottom and enlarged from shaft bottom to the new level), shaft sinking rate (10, 20, 30, 40, 50 and 60 m/month), range of increasing shaft depth (the difference between depth of the shaft before and after increasing its depth by 100, 200, 300 and 400 m). Comparative evaluations show that the optimum shaft sinking rate depends on the scheme for rock hoisting (one of 4 analyzed), range of increasing shaft depth and gas content in coal seams. The optimum shaft sinking rate ranges from 20 to 40 m/month in coal mines with low methane content and from 20 to 30 m/month in gassy coal mines. The planned coal output of a mine does not influence the optimum shaft sinking rate.

Reactor refueling machine simulator

International Nuclear Information System (INIS)

Rohosky, T.L.; Swidwa, K.J.

1987-01-01

This patent describes in combination: a nuclear reactor; a refueling machine having a bridge, trolley and hoist each driven by a separate motor having feedback means for generating a feedback signal indicative of movement thereof. The motors are operable to position the refueling machine over the nuclear reactor for refueling the same. The refueling machine also has a removable control console including means for selectively generating separate motor signals for operating the bridge, trolley and hoist motors and for processing the feedback signals to generate an indication of the positions thereof, separate output leads connecting each of the motor signals to the respective refueling machine motor, and separate input leads for connecting each of the feedback means to the console; and a portable simulator unit comprising: a single simulator motor; a single simulator feedback signal generator connected to the simulator motor for generating a simulator feedback signal in response to operation of the simulator motor; means for selectively connecting the output leads of the console to the simulator unit in place of the refueling machine motors, and for connecting the console input leads to the simulator unit in place of the refueling machine motor feedback means; and means for driving the single simulator motor in response to any of the bridge, trolley or hoist motor signals generated by the console and means for applying the simulator feedback signal to the console input lead associated with the motor signal being generated by the control console

Reliability and validity of internalized stigmatization scale in psoriasis

Directory of Open Access Journals (Sweden)

Erkan Alpsoy

2015-03-01

Full Text Available Backround and design. Internalized stigma involves endorsing negative feelings and beliefs such as insignificance, shame and withdrawal triggered by applying these negative stereotypes to one self. Internalized Stigma Scale has not been applied to psoriasis patients. We aimed to evaluate the reliability and validity of Internalized Stigma Scale in psoriasis patients. Materials and Methods. 100 consecutive, volunteer psoriasis patients (48 female, 52 male; aged, 40.59±15.44 years were enrolled in the study. PASI and BSA were evaluated by physician (A.B.. Patients responded contemporaneously to Psoriasis Internalized Stigma Scale (PISS, DQoL, and Perceived Health Status (PHS, single-item self-rated general health question, of which Likert scores 1, 2, and 3 were classified as “from fair to very poor”, and 4, 5 as “good”. Results. Cronbach's alpha coefficient of PISS subscales was 0.83 for alienation, 0.70 for stereotype endorsement, 0.70 for perceived discrimination, 0.84 for social withdrawal and 0.68 for stigma resistance. The same value was 0.89 for the total scale. PISS and DQoL scores mean values were 58.8±12.6 and 10.0±9.4, respectively. PISS was significantly correlated with the patients' DQoL scores (r=,726, p=0,001. PISS was also significantly correlated with disease duration (r=,209, p=0,047. There was no any significant relationship between PASI or BSA and PISS. Mean DQoL scores in patients reporting their PHS as “from fair to very poor” and “good” were 12.1±7.3 and 5.0±4.3, respectively. Mean values of PISS in patients reporting their PHS as “from fair to very poor” was significantly increased compared with patients reporting their PHS as “good” (p=0.001. Conclusion. PISS can be used as a reliable and valid tool in assesing internalized stigmatization in psoriasis patients. Our results indicate a high level of stigmatization in psoriasis patients. Low DQoL scores show a correlation with increased levels of

29 CFR 1915.116 - Use of gear.

Science.gov (United States)

2010-07-01

... manually or by a crane, winch, hoist, or derrick, shall be completely opened. The beam or pontoon left in... employees are in the square of the hatch below. (p) Before loads or empty lifting gear are raised, lowered...

Concentrating solar power research at CSIR

CSIR Research Space (South Africa)

Roos, T

2012-10-01

Full Text Available floor: desalination, abs chiller, hoisting area Tower and storage Tower requirements review, due to Visit to PSA No personnel in tower while the heliostat field is operational All research experiments are controlled from the ground...

THE NAVAL CAMPAIGN IN THE WAR OF THE PACIFIC 1879-1884

African Journals Online (AJOL)

tionships between Chile, Peru, Argentina, Para- guay and ... On 1 March 1879 Bolivia declared war on Chile, knowing that she .... tion and then hoisted the flag signal "Enemy to. North". ... soared and Prat and Condell became national heroes.

33 CFR 5.47 - Auxiliary ensign.

Science.gov (United States)

2010-07-01

... matching blue Coast Guard Auxiliary emblem is centered. The white slash shall be at a 70 degree angle, rising away from the hoist. (c) The Auxiliary emblem consists of a disk with the shield of the Coat of...

Improvement of stability of oil-in-water emulsions containing caseinate-coated droplets by addition of sodium alginate.

Science.gov (United States)

Pallandre, S; Decker, E A; McClements, D J

2007-11-01

The potential of sodium alginate for improving the stability of emulsions containing caseinate-coated droplets was investigated. One wt% corn oil-in-water emulsions containing anionic caseinate-coated droplets (0.15 wt% sodium caseinate) and anionic sodium alginate (0 to 1 wt%) were prepared at pH 7. The pH of these emulsions was then adjusted to 3.5, so that the anionic alginate molecules adsorbed to the cationic caseinate-coated droplets. Extensive droplet aggregation occurred when there was insufficient alginate to completely saturate the droplet surfaces due to bridging flocculation, and when the nonadsorbed alginate concentration was high enough to induce depletion flocculation. Emulsions with relatively small particle sizes could be formed over a range of alginate concentrations (0.1 to 0.4 wt%). The influence of pHs (3 to 7) and sodium chloride (0 to 500 mM) on the properties of primary (0 wt% alginate) and secondary (0.15 wt% alginate) emulsions was studied. Alginate adsorbed to the droplet surfaces at pHs 3, 4, and 5, but not at pHs 6 and 7, due to electrostatic attraction between anionic groups on the alginate and cationic groups on the adsorbed caseinate. Secondary emulsions had better stability than primary emulsions at pH values near caseinate's isoelectric point (pHs 4 and 5). In addition, secondary emulsions were stable up to higher ionic strengths (< 300 mM) than primary emulsions (<50 mM). The controlled electrostatic deposition method utilized in this study could be used to extend the range of application of dairy protein emulsifiers in the food industry.

Abscisic acid content and the expression of genes related to its metabolism during maturation of triticale grains of cultivars differing in pre-harvest sprouting susceptibility.

Science.gov (United States)

Fidler, Justyna; Zdunek-Zastocka, Edyta; Prabucka, Beata; Bielawski, Wiesław

2016-12-01

Abscisic acid (ABA) is a plant hormone that plays a predominant role in the onset and maintenance of primary dormancy. Peak ABA accumulation in embryos of triticale grains was observed before any significant loss of water and was higher in Fredro, a cultivar less susceptible to pre-harvest sprouting (PHS), than in Leontino, a cultivar more sensitive to PHS. At full maturity, embryonic ABA content in Fredro was twice as high as in Leontino. Two full-length cDNAs of 9-cis-epoxycarotenoid dioxygenase (TsNCED1, TsNCED2), an enzyme involved in ABA biosynthesis, and two full-length cDNAs of ABA 8'-hydroxylase (TsABA8'OH1 and TsABA8'OH2), an enzyme involved in ABA catabolism, were identified in triticale grains and characterized. The maximum transcript level of both TsNCED1 and TsNCED2 preceded the peak of ABA accumulation, suggesting that both TsNCEDs contribute to reach this peak, although the expression of TsNCED1 was significantly higher in Fredro than in Leontino. High expression of TsABA8'OH2 and TsABA8'OH1 was observed long before and at the end of the ABA accumulation peak, respectively, but no differences were observed between cultivars. The obtained results suggest that mainly TsNCED1 might be related to the higher ABA content and higher resistance of Fredro to PHS. However, Fredro embryos not only have higher ABA content, but also exhibit greater sensitivity to ABA, which may also have a significant effect on grain dormancy and lower susceptibility to PHS for grains of this cultivar. Copyright © 2016 Elsevier GmbH. All rights reserved.

Adsorption characteristics of a cationic porphyrin on nanoclay at various pH.

Science.gov (United States)

Rice, Zachary; Bergkvist, Magnus

2009-07-15

Natural and synthetic porphyrin derivatives offer a range of applications including enzymatic catalysis, photosensitizers for light harvesting and chemical reactions, and molecular electronics. They exhibit unique optical spectra dominated by the presence of Soret and Q-band structures whose position and shape offer a straightforward method to characterize porphyrins in various surroundings. In many applications it is often beneficial to have porphyrins adsorbed onto a solid matrix. Applications of porphyrin-clay complexes extend to numerous biological applications including pharmaceutical drug delivery, cosmetics, and agricultural applications and thus a full understanding of porphyrin-clay surface interactions are essential. Here we investigated the adsorption behavior of meso-tetra(4-N,N,N-trimethylanilinium) porphine (TMAP) onto sodium containing, natural montmorillonite clay (Cloisite Na(+)) in characteristic biological buffers over a range of pHs (approximately 2-9). Spectroscopic analyses show a linear absorption response at acidic and basic pHs but a slight deviation at intermediate pHs. Absorption spectra for TMAP on clay showed distinct red shifts of the Soret and Q-bands compared to free TMAP for all buffer conditions indicating core pi-electron delocalization into the substituent rings. At intermediate pHs, a gradual transition between protonated/deprotonated states were seen, presumably due to higher H(+) concentration at the surface than in bulk. Results indicate TMAP adsorption to clay occurs in a monolayer fashion at low/high pH while slightly acidic/neutral pH possibly rearrange on the surface and/or form aggregates. AFM images of clay saturated with TMAP are reported and show single isolated clay sheets without aggregation, similar to clay without TMAP.

Response of microbial community and catabolic genes to simulated petroleum hydrocarbon spills in soils/sediments from different geographic locations.

Science.gov (United States)

Liu, Q; Tang, J; Liu, X; Song, B; Zhen, M; Ashbolt, N J

2017-10-01

Study the response of microbial communities and selected petroleum hydrocarbon (PH)-degrading genes on simulated PH spills in soils/sediments from different geographic locations. A microcosm experiment was conducted by spiking mixtures of petroleum hydrocarbons (PHs) to soils/sediments collected from four different regions of China, including the Dagang Oilfield (DG), Sand of Bohai Sea (SS), Northeast China (NE) and Xiamen (XM). Changes in bacterial community and the abundance of PH-degrading genes (alkB, nah and phe) were analysed by denaturing gradient electrophoresis (DGGE) and qPCR, respectively. Degradation of alkanes and PAHs in SS and NE materials were greater (P < 0·05) than those in DG and XM. Clay content was negatively correlated with the degradation of total alkanes by 112 days and PAHs by 56 days, while total organic carbon content was negatively correlated with initial degradation of total alkanes as well as PAHs. Abundances of alkB, nah and phe genes increased 10- to 100-fold and varied by soil type over the incubation period. DGGE fingerprints identified the dominance of α-, β- and γ-Proteobacteria (Gram -ve) and Actinobacteria (Gram +ve) bacteria associated with degradation of PHs in the materials studied. The geographic divergence resulting from the heterogeneity of physicochemical properties of soils/sediments appeared to influence the abundance of metabolic genes and community structure of microbes capable of degrading PHs. When developing practical in-situ bioremediation approaches for PHs contamination of soils/sediment, appropriate microbial community structures and the abundance of PH-degrading genes appear to be influenced by geographic location. © 2017 The Society for Applied Microbiology.

Sorption of Eu(III) on Pseudomonas fluorescens in the presence of citric acid

International Nuclear Information System (INIS)

Suzuki, Yoshinori; Tsushima, Satoru; Yamamoto, Ichiro; Nankawa, Takuya; Yoshida, Takahiro; Ozaki, Takuo; Ohnuki, Toshihiko; Francis, Arokiasamy J.; Enokida, Youichi

2005-01-01

We studied the sorption of Eu(III) on Pseudomonas fluorescens in the absence and presence of citric acid by a batch method. The cells were placed in a solution containing 2 μM of Eu(III) and 0, 100, or 1000 μM of citric acid at pH 3 9 for 5 hours. In the absence of citric acid, almost 100% of Eu(III) was sorbed on P. fluorescens at pHs below 7; above 7, sorption decreased with an increase in pH. The time course of Eu(III) sorption on P. fluorescens showed that a fraction of it was desorbed into the solution at alkaline pHs, suggesting that the bacterium may release some exudates. With citric acid present, we found that at higher concentrations there was lower sorption of Eu(III), reflecting the formation of Eu(III)-citrate complexes with the Eu(III)-cell-surface complexes. This decrease in Eu(III) sorption was significant in alkaline pHs. These findings suggest that citric acid which is ubiquitously found in the environment enhances migration of trivalent actinides in the alkaline environment. (author)

Fungal growth inhibitory properties of new phytosphingolipid analogues.

Science.gov (United States)

Mormeneo, D; Manresa, A; Casas, J; Llebaria, A; Delgado, A

2008-04-01

To study the growth inhibitory properties of a series of phytosphingosine (PHS) and phytoceramide (PHC) analogues. A panel of two yeast (Candida albicans and Saccharomyces cerevisiae) and six moulds (Aspergillus repens, Aspergillus niger, Penicillium chrysogenum, Cladosporium cladosporioides, Arthroderma uncinatum and Penicillium funiculosum) has been used in this study. A series of new PHS and PHC analogues differing at the sphingoid backbone and the functional group at C1 position were synthesized. Among PHS analogues, 1-azido derivative 1c, bearing the natural D-ribo stereochemistry, showed a promising growth inhibitory profile. Among PHC analogues, compound 12, with a bulky N-pivaloyl group and a Z double bond at C3 position of the sphingoid chain, was the most active growth inhibitor. Minimal inhibitory concentration values were in the range of 23-48 micromol l(-1) for 1c and 44-87 micromol l(-1) for 12. Only scattered data on the antifungal activity of phytosphingolipids have been reported in the literature. This is the first time that a series of analogues of this kind are tested and compared to discern their structural requirements for antifungal activity.

Scientific misconduct and research integrity for the bench scientist.

Science.gov (United States)

Pascal, C B

2000-09-01

This paper describes the role of the Office of Research Integrity (ORI), a component of the Public Health Service (PHS), in defining scientific misconduct in research supported with PHS funds and in establishing standards for responding to allegations of misconduct. The principal methods by which ORI exercises its responsibilities in this area are defining what types of behaviors undertaken by research investigators constitute misconduct, overseeing institutional efforts to investigate and report misconduct, and recommending to the Assistant Secretary for Health (ASH) PHS administrative actions when misconduct is identified. ORI also takes affirmative steps to promote research integrity through education, training, and other initiatives. The role of the research institution in responding to misconduct and promoting research integrity is complementary and overlapping with ORI's efforts but, as the employer of research investigators and front-line manager of the research, the institution has a greater opportunity to promote the highest standards of integrity in the day-to-day conduct of research. Finally, legal precedent established through civil litigation has played an important role in defining the standards that apply in determining when a breach of research integrity has occurred.

The relationship of work stress and family stress to the self-rated health of women employed in the industrial sector in Korea.

Science.gov (United States)

Kim, Gwang Suk; Cho, Won Jung; Lee, Chung Yul; Marion, Lucy N; Kim, Mi Ja

2005-01-01

To identify the relationship of work stress and family stress to the health of women in Korea. Cross-sectional study. Three hundred and thirty-one married women working in 14 manufacturing companies in Korea. Subjects responded to a questionnaire that included items on work stress, family stress, social support, and general characteristics. Perceived health status (PHS) was assessed with the Short Form-36. There was a significant positive relationship between social support and PHS, but significant negative relationships were found between PHS and work stress as well as family stress. Hierarchical multiple regression analysis explained the health status of married working women by four categories: personal, work related, family related, and social support, and accounted for 45.4% of the variance. When family-related factors were added to the model, the power of explanation was increased by 17.9% compared with the explained variance. Family stress was a major variable not only for explaining the variance but also for correlating with health status. Both work stress and family stress should be considered together when addressing the health of working women in the industrial sector in Korea.

Management of transport and handling contracts

CERN Document Server

Rühl, I

2004-01-01

This paper shall outline the content, application and management strategies for the various contracts related to transport and handling activities. In total, the two sections Logistics and Handling Maintenance are in charge of 27 (!) contracts ranging from small supply contracts to big industrial support contracts. The activities as well as the contracts can generally be divided into four main topics "Vehicle Fleet Management"; "Supply, Installation and Commissioning of Lifting and Hoisting Equipment"; "Equipment Maintenance" and "Industrial Support for Transport and Handling". Each activity and contract requires different approaches and permanent adaptation to the often changing CERN's requirements. In particular, the management and the difficulties experienced with the contracts E072 "Maintenance of lifting and hoisting equipment", F420 "Supply of seven overhead traveling cranes for LHC" and S090/S103 "Industrial support for transport and handling" will be explained in detail.

Radioactive substance solidifying device

International Nuclear Information System (INIS)

Sakoda, Kotaro.

1979-01-01

Purpose: To easily solidify radioactive substances adhering to the surfaces of solid wastes without scattering in the circumference by paints, and further to reduce surface contamination concentrations. Constitution: Solid wastes are placed on a hanging plate, and dipped in paints within a paint dipping treatment tank installed at the lower part of a treatment tank by means of a monorail hoist, and the surfaces of said solid wastes are coated with paints, thereby to solidify the radioactivity on the surfaces of the solid wastes. After dipping, the solid wastes are suspended up to a paint spraying tank to dry the paints. After drying, non-contaminated paints are atomized to apply through an atomizing tube onto the solid wastes. After drying the atomized paints, the solid wastes are carried outside the treatment tank by means of the monorail hoist. (Yoshino, Y.)

Henoch-Schönlein purpura in adults: a case series from a multidisciplinary study group Púrpura de Henoch-Schönlein em adultos: uma série de casos de um grupo de estudo multidisciplinar

Directory of Open Access Journals (Sweden)

Boris A. Cruz

2006-12-01

Full Text Available BACKGROUND: Henoch-Schönlein purpura (HSP is a systemic vasculitis involving small vessels with the deposition of immune complexes containing IgA. It has been extensively studied in children, but in adults, its natural history is much less known. OBJECTIVES: to report a series of patients with HSP presenting in their adulthood. PATIENTS AND METHODS: the Minas Gerais Vasculitis Study Group´s Members (MGVSG were invited to report patients with HSP who appeared in their adulthood. A standardized retrospective chart review was done. RESULTS: eleven patients, two male and nine female, age 39.4 +/- 20.1 yearsold were studied. Nine patients presented purpura, seven presented arthritis, four patients had gastrointestinal involvement and ten patients (91% presented glomerulonephritis (GN. Eight patients were subjected to renal biopsies. Six of them presented endocapillary proliferative GN and only two of them had minimal mesangial proliferation. In the other three patients, HSP was confirmed by skin biopsies. All patients received steroids, in five of them steroids were combined with other immunosuppressive agents. After a follow-up of 39.0 +/- 64.6 months, four patients (36% presented impairment of renal function, but only one (9% developed end stage renal disease and was successfully appeared to renal transplantation. At the end of follow-up, seven patients (64% are in complete remission and four in partial remission. CONCLUSION: in adulthood, HSP represents a distinct clinical syndrome with a higher frequency of renal involvement and more severe systemic vasculitis. Nevertheless, the final outcome in this series was as good as reported in children, maybe due to aggressive immunosuppressive therapy.INTRODUÇÃO: púrpura de Henoch-Schönlein (PHS é uma vasculite sistêmica que acomete vasos de pequeno calibre com depósitos de imunocomplexos contendo IgA. Esta vasculite já foi extensamente estudada em crianças, mas sua história natural em adultos

Electrochemical oxidation of 4-morpholinoaniline in aqueous solutions: Synthesis of a new trimer of 4-morpholinoaniline

International Nuclear Information System (INIS)

Esmaili, Roya; Nematollahi, Davood

2011-01-01

Research highlights: → Electrochemical study of 4-morpholinoaniline in various pHs. → Electrochemical trimerization of 4-morpholinoaniline in aqueous solution. → Green method for the synthesis of '4-morpholinoaniline-trimer'. → Potential-pH diagram for 4-morpholinoaniline. - Abstract: Electrochemical oxidation of 4-morpholinoaniline has been studied in various pHs using cyclic voltammetry and controlled-potential coulometry. The electrochemical trimerization of 4-morpholinoaniline is described and its mechanism has been studied in aqueous solution. This method provides a green, reagent-less, and environmentally friendly procedure with high atom economy, for the synthesis of '4-morpholinoaniline-trimer' using a carbon electrode in an undivided cell in good yield and purity.

Project Clinker, Hydraulic Carriage for Airship Installation of Optical Equipment

National Research Council Canada - National Science Library

Daly, P; Rosenberg, T

1954-01-01

.... One answer to this problem was a carriage having a top deck pivoted at one end. The movable deck was raised to the required angle by a motor driven hydraulic hoist of the type used commercially for dump trucks...

Cooperative control system of the floating cranes for the dual lifting

Directory of Open Access Journals (Sweden)

Mihee Nam

2018-01-01

Full Text Available This paper proposes a dual lifting and its cooperative control system with two different kinds of floating cranes. The Mega-erection and Giga-erection in the ship building are used to handle heavier and wider blocks and modules as ships and off-shore platforms are enlarged. However, there is no equipment to handle such Tera-blocks. In order to overcome the limit on performance of existing floating cranes, the dual lifting is proposed in this research. In the dual lifting, two floating cranes are well-coordinated to add up the lift capabilities of both cranes without any loss such that virtually a single crane is lifting, maneuvering and unloading. Two main constraints for the dual lifting are as follows: First, two barges of floating cranes should be constrained as a rigid body not to cause a relative motion between two barges and main hooks of the two cranes should be controlled as main hooks of a single crane. In order words, it is necessary to develop the cooperative control of two floating cranes in order to sustain a center of gravity of the module and minimize the tilting angle during the lifting and unloading by the two floating cranes. Two floating cranes are handled as a master-slave system. The master crane is able to gather information about all working conditions and make a decision to control the individual hook speed, which communicates the slave crane by TCP/IP. The developed control system has been embedded in the real floating crane systems and the dual lifting has been demonstrated five times at SHI shipyard in 2015. The moving angles of the lifting module are analyzed and verified to be suitable for hoisting control. It is verified that the dual lifting can be applied for many heavier and wider blocks and modules to shorten the construction time of ships and off-shore platforms.

Carboxymethyl cellulose (CMC)-loaded Co-Cu doped manganese ferrite nanorods as a new dual-modal simultaneous contrast agent for magnetic resonance imaging and nanocarrier for drug delivery system

Science.gov (United States)

Abbasi Pour, Sajjad; Shaterian, Hamid Reza; Afradi, Mojgan; Yazdani-Elah-Abadi, Afshin

2017-09-01

We synthesized Co0.25Cu0.25Mn0.5Fe2O4@CMC (CCMFe2O4@CMC) nanorods as a new dual-modal simultaneous for magnetic resonance imaging contrast agent and nanocarrier for drug delivery system. Impact of CCMFe2O4@CMC nanorods were investigated on the longitudinal (T1), transverse (T2) and transverse (T2∗) relaxation times for in vitro MRI contrast agent in water and also for drug delivery system, L-dopa was coated on CCMFe2O4@CMC nanorods and then in vitro drug release test was carried out at three PHs values and different temperatures. In vitro MR imaging demonstrated that r2 value of CCMFe2O4@CMC nanorods is 138.33 mM-1 s-1, CCMFe2O4@CMC is useful as T2 contrast agent relative to other T2 contrast agants. In vitro drug release test shows the amount of released L-dopa from CCMFe2O4@CMC nanorods at medium with pH = 1.2 is more than pH = 5.3 and 7.4.

Analysis of field-oriented controlled induction motor drives under sensor faults and an overview of sensorless schemes.

Science.gov (United States)

Arun Dominic, D; Chelliah, Thanga Raj

2014-09-01

To obtain high dynamic performance on induction motor drives (IMD), variable voltage and variable frequency operation has to be performed by measuring speed of rotation and stator currents through sensors and fed back them to the controllers. When the sensors are undergone a fault, the stability of control system, may be designed for an industrial process, is disturbed. This paper studies the negative effects on a 12.5 hp induction motor drives when the field oriented control system is subjected to sensor faults. To illustrate the importance of this study mine hoist load diagram is considered as shaft load of the tested machine. The methods to recover the system from sensor faults are discussed. In addition, the various speed sensorless schemes are reviewed comprehensively. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Calculation methods' comparative analysis of monorail hoist crane local bending effects

Directory of Open Access Journals (Sweden)

Cvijović Goran M.

2016-01-01

Full Text Available The results of numerical and experimental researches of local bending problems, carried on classic and medium-wide I profiles, were a basis for the adoption of the current standards (EN 15011: 2014 which regulates the action of the local stress caused by the effect of cart wheels. Regarding the fact that IPB (HE-B wide flange profiles are largely used for production of the main carriers of monorail transport systems, this paper presents the results of the action of the local stress caused by the effect of cart wheels on the HE-A flange profile, using the methods and procedures of relevant researchers, the procedures prescribed by the standard EN 15011 as well as the results of calculations using finite element method. It has been revealed, based on comparative analysis of the results, that in the transition zone low flange / rib longitudinal local stress on the lower contour flange, determined using the above mentioned standards have tightening characteristic, while all other methods, including finite element method, give the pressing nature of the considered voltage. In addition, all of these procedures, except for the finite element method, adopt the assumption that absolute value of voltage, caused by local bending on upper and lower contour of the loaded flange, are the same, and there is no physical justification. Bearing in mind the fact that stress identification, caused by the flange local bending, is an extremely important phase proving the strength of monorail beams, we may conclude that the application of standard EN 15011 does not provide reliable results when it comes to wide flange profiles.

A Historical Analysis of Crane Mishaps at Kennedy Space Center

Science.gov (United States)

Wolfe, Crystal

2014-01-01

Cranes and hoists are widely used in many areas. Crane accidents and handling mishaps are responsible for injuries, costly equipment damage, and program delays. Most crane accidents are caused by preventable factors. Understanding these factors is critical when designing cranes and preparing lift plans. Analysis of previous accidents provides insight into current recommendations for crane safety. Cranes and hoists are used throughout Kennedy Space Center to lift everything from machine components to critical flight hardware. Unless they are trained crane operators, most NASA employees and contractors do not need to undergo specialized crane training and may not understand the safety issues surrounding the use of cranes and hoists. A single accident with a crane or hoist can injure or kill people, cause severe equipment damage, and delay or terminate a program. Handling mishaps can also have a significant impact on the program. Simple mistakes like bouncing or jarring a load, or moving the crane down when it should go up, can damage fragile flight hardware and cause major delays in processing. Hazardous commodities (high pressure gas, hypergolic propellants, and solid rocket motors) can cause life safety concerns for the workers performing the lifting operations. Most crane accidents are preventable with the correct training and understanding of potential hazards. Designing the crane with human factors taken into account can prevent many accidents. Engineers are also responsible for preparing lift plans where understanding the safety issues can prevent or mitigate potential accidents. Cranes are widely used across many areas of KSC. Failure of these cranes often leads to injury, high damage costs, and significant delays in program objectives. Following a basic set of principles and procedures during design, fabrication, testing, regular use, and maintenance can significantly minimize many of these failures. As the accident analysis shows, load drops are often caused

Active Response Gravity Offload and Method

Science.gov (United States)

Dungan, Larry K. (Inventor); Valle, Paul S. (Inventor); Bankieris, Derek R. (Inventor); Lieberman, Asher P. (Inventor); Redden, Lee (Inventor); Shy, Cecil (Inventor)

2015-01-01

A variable gravity field simulator can be utilized to provide three dimensional simulations for simulated gravity fields selectively ranging from Moon, Mars, and micro-gravity environments and/or other selectable gravity fields. The gravity field simulator utilizes a horizontally moveable carriage with a cable extending from a hoist. The cable can be attached to a load which experiences the effects of the simulated gravity environment. The load can be a human being or robot that makes movements that induce swinging of the cable whereby a horizontal control system reduces swinging energy. A vertical control system uses a non-linear feedback filter to remove noise from a load sensor that is in the same frequency range as signals from the load sensor.

30 CFR 57.19019 - Guide ropes.

Science.gov (United States)

2010-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Personnel Hoisting Wire Ropes... than shaft development, the nominal strength (manufacturer's published catalog strength) of the guide...

78 FR 23837 - Cranes and Derricks in Construction: Underground Construction and Demolition

Science.gov (United States)

2013-04-23

... Health Act of 1970 (29 U.S.C. 651 et seq.) is ``to assure so far as possible every working man and woman... rope and the cage or skip shall be compatible with the type of wire rope used for hoisting. (vi) Spin...

46 CFR 163.002-9 - Approval procedure.

Science.gov (United States)

2010-10-01

... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS... designs. A pilot hoist that does not meet the materials, construction, or performance requirements of this... or in addition to the approval tests required by this subpart, show that the alternative materials...

STUDI BIODEGRADASI POLI HIDROKSI BUTIRAT DALAM MEDIA CAIR (Biodegradation of Poly Hydroxy Butyrate in Liquid Medium

Directory of Open Access Journals (Sweden)

Eka Sari

2007-11-01

Full Text Available ABSTRAK  Poli hidroksi butirat (PHS termasuk dalam golongan bioplastik. Plastik jenis ini diharapkan dapat menjadi plastik altematif yang ramah lingkungan sebagai pengganti plastik sintetis yang bersifat sangat suI it terdegradasi. Penelitian ini bertujuan menguji potensi biodegradabilitas PHS komersial dalam media cair dengan menggunakan lumpur aktif dan unit pengolahan limbah pabrik plastik sintetik. Identifikasi proses degradasi dilakukan dengan cara mengamati perubahan karakteristik PHS yang meliputi perubahan visual, perubahan morfologi permukaan, penurunan berat, perubahan kristalinitas, dan perubahan berat molekul selama 15 pekan inkubasi. Hasil penelitian menunjukkan bahwa kerusakan PHS se1ama proses degradasi dapat dilihat secara visual. Disamping itu, morfologi permukaan mengalami perubahan signifikan. Adapun penurunan berat, kristalinitas, dan berat molekul berturut-turut mencapai 22,91 %,57.44 %, dan 29,52 %.   ABSTRACT  Poly hidroxy butyrate (PHB is a member of bioplastic group. This type of plastic is expected to be alternative plastic which is environmently friendly to replace synthetic plastic that is known to be very difficult to degrade. This research aims to test the biodegradability of commercial PHB in liquid mediums used activated sludge from waste water treatment plant in plastic synthetic factory. Identification of biodegradation process  was done by monitoring the changes of PHB characteristics including visual change, surface morphology change, reduction of weight, reduction of crystallinity, and reduction of molecular weight during 15 weeks incubation. The result shows that  the damage of PHB sample during biodegradation could be seen visually and liquid medium show the existence of change which can be seen visually and the surface morphology of PHB changed significantly. Weight reduction, crystallinity  reduction, and molecular  weight reduction  revealed of 22.91%, 57.44%, and 29.52% respectively.

Simulation of tectonic evolution of the Kanto basin of Japan since 1 Ma due to subduction of the Pacific and Philippine sea plates and collision of the Izu-Bonin arc

Science.gov (United States)

Hashima, Akinori; Sato, Toshinori; Sato, Hiroshi; Asao, Kazumi; Furuya, Hiroshi; Yamamoto, Shuji; Kameo, Koji; Miyauchi, Takahiro; Ito, Tanio; Tsumura, Noriko; Kaneda, Heitaro

2015-04-01

The Kanto basin, the largest lowland in Japan, developed by flexure as a result of (1) the subduction of the Philippine Sea (PHS) and the Pacific (PAC) plates and (2) the collision of the Izu-Bonin arc with the Japanese island arc. Geomorphological, geological, and thermochronological data on long-term vertical movements over the last 1 My suggest that subsidence initially affected the entire Kanto basin after which the area of subsidence gradually narrowed until, finally, the basin began to experience uplift. In this study, we modelled the tectonic evolution of the Kanto basin following the method of Matsu'ura and Sato (1989) for a kinematic subduction model with dislocations, in order to quantitatively assess the effects of PHS and PAC subduction. We include the steady slip-rate deficit (permanent locking rate at the plate interface) in our model to account for collision process. We explore how the arc-arc collision process has been affected by a westerly shift in the PHS plate motion vector with respect to the Eurasian plate, thought to have occurred between 1.0-0.5 Ma, using long-term vertical deformation data to constrain extent of the locked zone on the plate interface. We evaluated the change in vertical deformation rate for two scenarios: (1) a synchronous shift in the orientation of the locked zone as PHS plate motion shifts and (2) a delayed shift in the orientation of the locked zone following a change in plate motion. Observed changes in the subsidence/uplift pattern are better explained by scenario (2), suggesting that recent (<1 My) deformation in the Kanto basin shows a lag in crustal response to the shift in plate motion. We also calculated recent stress accumulation rates and found a good match with observed earthquake mechanisms, which shows that intraplate earthquakes serve to release stress accumulated through long-term plate interactions.

Simulation of tectonic evolution of the Kanto Basin of Japan since 1 Ma due to subduction of the Pacific and Philippine Sea plates and the collision of the Izu-Bonin arc

Science.gov (United States)

Hashima, Akinori; Sato, Toshinori; Sato, Hiroshi; Asao, Kazumi; Furuya, Hiroshi; Yamamoto, Shuji; Kameo, Koji; Miyauchi, Takahiro; Ito, Tanio; Tsumura, Noriko; Kaneda, Heitaro

2016-06-01

The Kanto Basin, the largest lowland in Japan, developed by flexure as a result of (1) the subduction of the Philippine Sea (PHS) and the Pacific (PAC) plates and (2) the repeated collision of the Izu-Bonin arc fragments with the Japanese island arc. Geomorphological, geological, and thermochronological data on vertical movements over the last 1 My suggest that subsidence initially affected the entire basin after which the area of subsidence gradually narrowed until, finally, the basin began to experience uplift. In this study, we modeled the tectonic evolution of the Kanto Basin following the method of Matsu'ura and Sato (1989) for a kinematic subduction model with dislocations, in order to quantitatively assess the effects of PHS and PAC subduction. We include the steady slip-rate deficit (permanent locking rate at the plate interface) in our model to account for collision process. We explore how the latest collision of the Izu Peninsula block has been affected by a westerly shift in the PHS plate motion vector with respect to the Eurasian plate, thought to have occurred between 1.0-0.5 Ma, using long-term vertical deformation data to constrain extent of the locked zone on the plate interface. We evaluated the change in vertical deformation rate for two scenarios: (1) a synchronous shift in the orientation of the locked zone as PHS plate motion shifts and (2) a delayed shift in the orientation of the locked zone following the shift in plate motion. Observed changes in the uplift/subsidence pattern are better explained by scenario (2), suggesting that recent (< 1 My) deformation in the Kanto Basin shows a lag in crustal response to the plate motion shift. We also calculated stress accumulation rates and found a good match with observed earthquake mechanisms, which shows that intraplate earthquakes serve to release stress accumulated through long-term plate interactions.

New petroleum lifting concept - tubular asynchronous motor application for onshore petroleum exploitation - (MATAEOS); Nova concepcao para bombeamento de petroleo - motor assincrono tubular para aplicacao na extracao de oleo (petroleo) subterraneo - MATAEOS

Energy Technology Data Exchange (ETDEWEB)

Rossini, Wagner Marques; Cruz, Jose Jaime da; Sales, Roberto Moura [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica. Lab. de Automacao e Controle (LAC)], e-mail: freddie@lac.usp.br, e-mail: jaime@lac.usp.br, e-mail: roberto@lac.usp.br; Alvarenga, Bernardo Pinheiro de; Chabu, Ivan Eduardo; Cardoso, Jose Roberto [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica. Lab.de Eletromagnetismo Aplicado (LMAG)], e-mail: bernardo@eee.ufg.br, e-mail: ichabu@pea.usp.br, e-mail: cardoso@pea.usp.br

2008-06-15

This study presents the development of a prototype Tubular Asynchronous Motor Application for Onshore Petroleum Exploitation - (MATAEOS). The principal function of the motor is to directly drive a suction pump installed in the down hole of an onshore well. Considering the installation and operational difficulties and costs of a traditional production system, known as a ''the walking beam and rod string system'', the developed prototype is intended to be a technical and economically viable alternative. The results obtained show that the motor develops a constant lift force throughout the movement (or pumping) cycle, according to the dynamometric charts. The motor also presented an electro-mechanical performance higher than the traditional systems. Furthermore, the motor completely eliminates the need for the actual system's set of hoists. Generally, the results indicate that the motor can advantageously substitute surface mechanical systems. (author)

Overhead Crane Computer Model

Science.gov (United States)

Enin, S. S.; Omelchenko, E. Y.; Fomin, N. V.; Beliy, A. V.

2018-03-01

The paper has a description of a computer model of an overhead crane system. The designed overhead crane system consists of hoisting, trolley and crane mechanisms as well as a payload two-axis system. With the help of the differential equation of specified mechanisms movement derived through Lagrange equation of the II kind, it is possible to build an overhead crane computer model. The computer model was obtained using Matlab software. Transients of coordinate, linear speed and motor torque of trolley and crane mechanism systems were simulated. In addition, transients of payload swaying were obtained with respect to the vertical axis. A trajectory of the trolley mechanism with simultaneous operation with the crane mechanism is represented in the paper as well as a two-axis trajectory of payload. The designed computer model of an overhead crane is a great means for studying positioning control and anti-sway control systems.

Research and service programs in the PHS: challenges in organization

National Research Council Canada - National Science Library

Institute of Medicine Staff; Institute of Medicine

1991-01-01

... Committee on Co-Administration of Service and Research Programs of the National Institutes of Health, the Alcohol, Drug Abuse, and Mental Health Administration, and Related Agencies INSTITUTE OF MEDICINE NATIONAL ACADEMY PRESS Washington, D.C. 1991 Copyrightoriginal retained, the be not from cannot book, paper original however, for version formatting, author...

Prevention of disabling back injuries in nurses by the use of mechanical patient lift systems.

Science.gov (United States)

Edlich, Richard F; Winters, Kathryne L; Hudson, Mary Anne; Britt, L D; Long, William B

2004-01-01

immediately has resulted in numerous denials of claims for rehabilitation and compensation that nurses deserve. Experts believe that training in proper body mechanics does not prevent back injury. Consequently, focus has been placed on other innovative injury prevention programs, including the use of engineering controls as well as the "lift team" method. Ergonomics involves the use of mechanical devices (e.g., walking belt and mechanical hoist) to aid in patient lifting and transferring tasks. Guldmann Inc. has devised ceiling lift systems and slings during the past 20 years. They have successfully completed thousands of installations worldwide, covering a wide range of challenging conditions and complex environments. The Guldmann ceiling-mounted hoist system consists of a wide range of lifting units, rail components, and a complete assortment of lifting slings and accessories. Its sling is made of polyester, which is characterized by its strength and elasticity. It retains its shape and is dirt repellent and easy to maintain. The Guldmann network has one of the largest and indisputably most experienced group of certified installers in the United States. The "lift team" method was devised to remove nursing personnel from the everyday task of moving patients. This type of intervention assumes that lifting is a specialized skill to be performed only by expert professional patient movers who have been thoroughly trained in the latest lifting device techniques.

Optimizing Intratheater Military Airlift in Iraq and Afghanistan

Science.gov (United States)

2013-01-01

bring aircraft home from war. That I have hoisted sail to all the winds, which should transport me farthest from your sight. Shakespeare , Sonnet... INTRODUCTION The logistics of transporting, arming, feeding, clothing, sheltering, and fueling hun- dreds of thousands of personnel involved with our

Lifting gear crucial in Big Bang experiment

CERN Multimedia

2007-01-01

"On November 26 2007, the most complex scientific instrument ever built will be turned on in an attempt to rerun the Big Bang - but i would never have got off the ground - litteraly - without the hundreds of hoists and cranes on site." (1/2 page)

Role of steel wire ropes in mine safety

CSIR Research Space (South Africa)

Peake, A

2008-11-01

Full Text Available Today there are an estimated 2 300 steel wire ropes installed in roughly 200 underground mines in South Africa. These mines employ more than 280 000 workers underground and hoist several millions of tonnes of rock to the surface every month...

Characterization of Tamyb10 allelic variants and development of STS marker for pre-harvest sprouting resistance in Chinese bread wheat.

Science.gov (United States)

Wang, Y; Wang, X L; Meng, J Y; Zhang, Y J; He, Z H; Yang, Y

2016-01-01

Wheat grain color does not only affect the brightness of flour but also seed dormancy and pre-harvest sprouting (PHS) tolerance. The transcription factor Tamyb10 is an important candidate for R-1 gene, and the expression of its homologs determines wheat seed coat color. In the present study, the allelic variations of Tamyb10 were explored in a set of Chinese bread wheat varieties and advanced lines with different PHS tolerance, and a sequenced-tagged site (STS) marker for Tamyb10-D1 gene was developed, designated as Tamyb10D , which could be used as an efficient and reliable marker to evaluate the depth dormancy of wheat seeds. Using the marker Tamyb10D , 1629- and 1178-bp PCR fragments were amplified from the tolerant varieties, whereas a 1178-bp fragment was from the susceptible ones. Of the Chinese bread wheat varieties and advanced lines, 103 were used to validate the relationship between the polymorphic fragments of Tamyb10D and PHS tolerance. Statistical analysis indicated that Tamyb10D was significantly ( P  varieties, 8 Tamyb10 genotypes ( Tamybl0-A1 , Tamybl0-B1 , and Tamyb10-D1 loci) were detected, namely, aaa, aab, aba, abb, baa, bab, bba, and bbb, and these were significantly associated with GI value.

Erosive effects of common beverages on extracted premolar teeth.

Science.gov (United States)

Seow, W K; Thong, K M

2005-09-01

Dental erosion is highly prevalent today, and acidic drinks are thought to be an important cause. The aim of the present investigation was to determine the erosive potential of a range of common beverages on extracted human teeth. The beverages were tested for their individual pHs using a pH meter. The clinical effects of the most erosive beverages were determined by the degree of etching and Vickers microhardness of enamel. The results showed that many common beverages have pHs sufficiently low to cause enamel erosion. Lime juice concentrate (pH 2.1) had the lowest pH, followed by Coca-cola and Pepsi (both with pH 2.3) and Lucozade (pH 2.5). The erosive potential of these beverages was demonstrated by the deep etching of the enamel after five minutes. The Vickers Hardness of enamel was reduced by about 50 per cent in the case of lime juice (p case of Coca-cola (p Coca-cola completely reversed the erosive effects on the enamel. Although only a few of the beverages with the lowest pHs were tested, the present study showed that the most acidic drinks had the greatest erosive effects on enamel. While saliva was protective against erosion, relatively large volumes were required to neutralize the acidity.

Distribution of petroleum degrading genes and factor analysis of petroleum contaminated soil from the Dagang Oilfield, China

Science.gov (United States)

Liu, Qinglong; Tang, Jingchun; Bai, Zhihui; Hecker, Markus; Giesy, John P.

2015-01-01

Genes that encode for enzymes that can degrade petroleum hydrocarbons (PHs) are critical for the ability of microorganisms to bioremediate soils contaminated with PHs. Distributions of two petroleum-degrading genes AlkB and Nah in soils collected from three zones of the Dagang Oilfield, Tianjin, China were investigated. Numbers of copies of AlkB ranged between 9.1 × 105 and 1.9 × 107 copies/g dry mass (dm) soil, and were positively correlated with total concentrations of PHs (TPH) (R2 = 0.573, p = 0.032) and alkanes (C33 ~ C40) (R2 = 0.914, p < 0.01). The Nah gene was distributed relatively evenly among sampling zones, ranging between 1.9 × 107 and 1.1 × 108 copies/g dm soil, and was negatively correlated with concentrations of total aromatic hydrocarbons (TAH) (R2 = −0.567, p = 0.035) and ∑16 PAHs (R2 = −0.599, p = 0.023). Results of a factor analysis showed that individual samples of soils were not ordinated as a function of the zones. PMID:26086670

Transient Torsional Analysis of a Belt Conveyor Drive with Pneumatic Flexible Shaft Coupling

Directory of Open Access Journals (Sweden)

Kaššay Peter

2017-03-01

Full Text Available Development and application of pneumatic flexible shaft couplings have been in the center of our department research activities for a long time. These couplings are able to change torsional stiffness by changing pressure in their flexible elements – air bellows. Until now we have dealt with the use of pneumatic flexible shaft couplings for tuning mechanical systems working with periodically alternating load torque at steady state. Some mechanical systems, however, operate with a static load torque at constant speed (e.g. hoists, elevators, etc., where it is necessary to consider the suitability of shaft coupling in terms of load torque at transient conditions (run-up and braking. Therefore we decided to analyze the use of pneumatic flexible shaft couplings also in this type of mechanical systems on an example of conveyor belt drive.

Single-failure-proof cranes for nuclear power plants

International Nuclear Information System (INIS)

Porse, L.

1979-05-01

NRC has licensed reactors on the basis that the safe handling of critical loads can be accomplished by adding safety features to the handling equipment, by adding special features to the structures and areas over which the critical load is carried, or by a combination of the two. When reliance for the safe handling of critical loads is placed on the crane system itself, the system should be designed so that a single failure will not result in the loss of the capability of the system to safely retain the load. Features of the design, fabrication, installation, inspection, testing, and operation of single-failure-proof overhead crane handling systems that are used for handling critical loads are identified. These features are limited to the hoisting system and to braking systems for trolley and bridge. Other load-bearing items such as girders should be conservatively designed but need not be considered single failure proof

30 CFR 75.1429 - Guide ropes.

Science.gov (United States)

2010-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Hoisting and Mantrips Wire Ropes § 75.1429 Guide ropes. If guide... strength (manufacturer's published catalog strength) of the guide rope at installation shall meet the...

29 CFR 1910.306 - Specific purpose equipment and installations.

Science.gov (United States)

2010-07-01

...) Cranes and hoists. This paragraph applies to the installation of electric equipment and wiring used in..., and similar events. This paragraph covers the installation of portable wiring and equipment, including... 29 Labor 5 2010-07-01 2010-07-01 false Specific purpose equipment and installations. 1910.306...

Loop quasi-invariant chunk detection

DEFF Research Database (Denmark)

Moyen, Jean-Yves; Rubiano, Thomas; Seiller, Thomas

2017-01-01

Several techniques for analysis and transformations are used in compilers. Among them, the peeling of loops for hoisting quasi-invariants can be used to optimize generated code, or simply ease developers’ lives. In this paper, we introduce a new concept of dependency analysis borrowed from the fi...

75 FR 22424 - Avalotis Corp.; Grant of a Permanent Variance

Science.gov (United States)

2010-04-28

... employer must ensure that the frame of the hoist machine is a self-supporting, rigid, welded-steel...-machine structure. 10. Personnel Cage (a) Construction. A personnel cage must be of steel-frame..., inspects, and demolishes tall chimneys made of reinforced concrete, brick, and steel. This work, which...

Culturally and Linguistically Appropriate Services Cnty Data

Data.gov (United States)

U.S. Department of Health & Human Services — PHS Act section 2719 requires non-grandfathered group health plans and health insurance issuers offering non-grandfathered health insurance coverage to provide...

SCFSLF-mediated cytosolic degradation of S-RNase is required for cross-pollen compatibility in S-RNase-based self-incompatibility in Petunia hybrida

Directory of Open Access Journals (Sweden)

Yongbiao eXue

2014-07-01

Full Text Available Many flowering plants adopt self-incompatibility (SI to maintain their genetic diversity. In species of Solanaceae, Plantaginaceae and Rosaceae, SI is genetically controlled by a single S-locus with multiple haplotypes. The S-locus has been shown to encode S-RNases expressed in pistil and multiple SLF (S-locus F-box proteins in pollen controlling the female and male specificity of SI, respectively. S-RNases appear to function as a cytotoxin to reject self-pollen. In addition, SLFs have been shown to form SCF (SKP1/Cullin1/F-box complexes to serve as putative E3 ubiquitin ligase to interact with S-RNases. Previously, two different mechanisms, the S-RNase degradation and the S-RNase compartmentalization, have been proposed as the restriction mechanisms of S-RNase cytotoxicity allowing compatible pollination. In this study, we have provided several lines of evidence in support of the S-RNase degradation mechanism by a combination of cellular, biochemical and molecular biology approaches. First, both immunogold labeling and subcellular fractionation assays showed that two key pollen SI factors, PhSLF-S3L and PhSSK1 (SLF-interacting SKP1-like1 from Petunia hybrida, a Solanaceous species, are co-localized in cytosols of both pollen grains and tubes. Second, PhS3L-RNases are mainly detected in the cytosols of both self and non-self pollen tubes after pollination. Third, we found that both PhS3-RNases and PhS3L-RNases directly interact with PhSLF-S3L by yeast two-hybrid and co-immunoprecipitation assays. Fourth, S-RNases are specifically degraded in compatible pollen tubes by non-self SLF action. Taken together, our results demonstrate that SCFSLF-mediated non-self S-RNase degradation occurs in the cytosol of pollen tube through the ubiquitin/26S proteasome system serving as the major mechanism to neutralize S-RNase cytotoxicity during compatible pollination in P. hybrida.

Portable bioimpedance monitor evaluation for continuous impedance measurements. Towards wearable plethysmography applications.

Science.gov (United States)

Ferreira, J; Seoane, F; Lindecrantz, K

2013-01-01

Personalised Health Systems (PHS) that could benefit the life quality of the patients as well as decreasing the health care costs for society among other factors are arisen. The purpose of this paper is to study the capabilities of the System-on-Chip Impedance Network Analyser AD5933 performing high speed single frequency continuous bioimpedance measurements. From a theoretical analysis, the minimum continuous impedance estimation time was determined, and the AD5933 with a custom 4-Electrode Analog Front-End (AFE) was used to experimentally determine the maximum continuous impedance estimation frequency as well as the system impedance estimation error when measuring a 2R1C electrical circuit model. Transthoracic Electrical Bioimpedance (TEB) measurements in a healthy subject were obtained using 3M gel electrodes in a tetrapolar lateral spot electrode configuration. The obtained TEB raw signal was filtered in MATLAB to obtain the respiration and cardiogenic signals, and from the cardiogenic signal the impedance derivative signal (dZ/dt) was also calculated. The results have shown that the maximum continuous impedance estimation rate was approximately 550 measurements per second with a magnitude estimation error below 1% on 2R1C-parallel bridge measurements. The displayed respiration and cardiac signals exhibited good performance, and they could be used to obtain valuable information in some plethysmography monitoring applications. The obtained results suggest that the AD5933-based monitor could be used for the implementation of a portable and wearable Bioimpedance plethysmograph that could be used in applications such as Impedance Cardiography. These results combined with the research done in functional garments and textile electrodes might enable the implementation of PHS applications in a relatively short time from now.

29 CFR Appendix A to Part 1926 - Designations for General Industry Standards Incorporated Into Body of Construction Standards

Science.gov (United States)

2010-07-01

... equipment and wiring, installation of .406(a) Personnel platforms, suspended, by cranes and derricks .550(g..., Hoisting: Base-Mounted Drum .553 Electric Equipment and Wiring, Installation of .406(a) Materials .552(b... Compressed Air Chambers .803(j) Cranes and Derricks .550(a)(15) Equipment Installation and Maintenance .402...

30 CFR 57.19028 - End attachment replacement.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false End attachment replacement. 57.19028 Section 57.19028 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL... Hoisting Wire Ropes § 57.19028 End attachment replacement. Wire rope attachments shall be replaced when...

30 CFR 57.19122 - Replacement parts.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Replacement parts. 57.19122 Section 57.19122 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Inspection and Maintenance § 57.19122 Replacement parts. Parts used to repair hoists shall have properties...

30 CFR 77.1438 - End attachment replacement.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false End attachment replacement. 77.1438 Section 77.1438 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND... Personnel Hoisting Wire Ropes § 77.1438 End attachment replacement. Wire rope attachments shall be replaced...

30 CFR 56.19122 - Replacement parts.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Replacement parts. 56.19122 Section 56.19122 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Inspection and Maintenance § 56.19122 Replacement parts. Parts used to repair hoists shall have properties...

Laboratory study on the adsorption of Mn(2+) on suspended and deposited amorphous Al(OH)(3) in drinking water distribution systems.

Science.gov (United States)

Wang, Wendong; Zhang, Xiaoni; Wang, Hongping; Wang, Xiaochang; Zhou, Lichuan; Liu, Rui; Liang, Yuting

2012-09-01

Manganese (II) is commonly present in drinking water. This paper mainly focuses on the adsorption of manganese on suspended and deposited amorphous Al(OH)(3) solids. The effects of water flow rate and water quality parameters, including solution pH and the concentrations of Mn(2+), humic acid, and co-existing cations on adsorption were investigated. It was found that chemical adsorption mainly took place in drinking water with pHs above 7.5; suspended Al(OH)(3) showed strong adsorption capacity for Mn(2+). When the total Mn(2+) input was 3 mg/L, 1.0 g solid could accumulate approximately 24.0 mg of Mn(2+) at 15 °C. In drinking water with pHs below 7.5, because of H(+) inhibition, active reaction sites on amorphous Al(OH)(3) surface were much less. The adsorption of Mn(2+) on Al(OH)(3) changed gradually from chemical coordination to physical adsorption. In drinking water with high concentrations of Ca(2+), Mg(2+), Fe(3+), and HA, the removal of Mn(2+) was enhanced due to the effects of co-precipitation and adsorption. In solution with 1.0 mg/L HA, the residual concentration of Mn(2+) was below 0.005 mg/L, much lower than the limit value required by the Chinese Standard for Drinking Water Quality. Unlike suspended Al(OH)(3), deposited Al(OH)(3) had a much lower adsorption capacity of 0.85 mg/g, and the variation in flow rate and major water quality parameters had little effect on it. Improved managements of water age, pipe flushing and mechanical cleaning were suggested to control residual Mn(2+). Copyright © 2012 Elsevier Ltd. All rights reserved.

IJAJ 3(4), S/No 12, September, 2014

African Journals Online (AJOL)

matthew

2014-09-12

Sep 12, 2014 ... This study focuses on ritual symbols and behaviours among the ... Our findings reveal that symbol in Isiokpo-Ikwerre religious thought is a ... hoisting of omunku could have for the affected family. ... On the other hand a ritual is often viewed as a non rational means (however .... environment. ..... messages.

30 CFR 77.1402-1 - Maximum load; posting.

Science.gov (United States)

2010-07-01

....1402-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL... number of men permitted to ride on each hoist or elevator at one time; this limit shall be posted on each...

Technical conservatisms in NWTS repository conceptual designs. National Waste Terminal Storage Repository No. 1: special study No. 4

International Nuclear Information System (INIS)

1980-09-01

Prior studies have developed conceptual designs for National Waste Terminal Storage Repositories 1 and 2. Due to the considerable detail and volume of the documents describing these designs, it is often difficult to identify and comprehend the substantial conservatisms contained within them. This study identifies and explains the major technical conservatisms in these two conceptual designs in a concise and readily understandable format. The areas discussed include thermal loading of the geologic structure, rock mechanics and underground design, waste throughput capacity, hoisting systems, nuclear criticality safety, confinement of radioactive materials, occupational exposure and health physics, environmental effects, and cost estimates. Conservatisms are described in detail, quantified where possible, and compared to appropriate criteria

A Colon Targeted Delivery System for Resveratrol Enriching in pH Responsive-Model

Directory of Open Access Journals (Sweden)

Hashem Andishmand, Hamed Hamishehkar, Afshin Babazadeh, Arezou Taghvimi, Mohammad Amin Mohammadifar, Mahnaz Tabibiazar

2017-03-01

Full Text Available Background: Resveratrol effects on the prevention and treatment of colon cancer have been well documented recently, but low solubility, rapid absorption and metabolism of resveratrol limit its beneficial effects on colon cancer. Designing a formulation that enhances the solubility of resveratrol, protects resveratrol from oxidation and isomerization, and delivers it to the colon is a priority of food and drug industry. In this study, resveratrol-polyethylene glycol (PEG-loaded pectin-chitosan polyelectrolyte complex was designed as a colon targeted delivery system. Methods: The effects of adding PEG, ultra-sonication time, pH, and pectin to chitosan ratio were investigated on particle size, polydispersity index (PDI, zeta potential by particle size analyzer, and scanning electron microscopy (SEM. Encapsulation efficiency (EE, release of resveratrol in simulated gastrointestinal fluid, and different pHs were analyzed via High Performance Liquid Chromatography (HPLC. Antioxidant activity was measured by (2, 2-diphenyl-1-picryl-hydrazyl-hydrate DPPH free-radical method. Results: Results showed that colloidal stable micro-particles (725 ± 20 nm with PDI < 0.3 and zeta potential +27 ± 2 mV was formed in the ratio of 5:1 of pectin to chitosan w/v % after a 10-min sonication. Encapsulation efficiency was 81 ± 7 %. The reduction of antioxidant activity of resveratrol loaded micro-particles after one month was less than 13%. Micro-particles released about 33% of resveratrol in the simulated gastric and intestinal fluids. Conclusion: Two-thirds of the loaded resveratrol in Pectin-Chitosan complex reached colon. The developed system had enough specification for enriching fruit based drinks due to remarkable colloidal stability in the pH range of 3.5 to 4.5.

Seismic velocity structure and spatial distribution of reflection intensity off the Boso Peninsula, Central Japan, revealed by an ocean bottom seismographic experiment

Science.gov (United States)

Kono, Akihiro; Sato, Toshinori; Shinohara, Masanao; Mochizuki, Kimihiro; Yamada, Tomoaki; Uehira, Kenji; Shinbo, Takashi; Machida, Yuuya; Hino, Ryota; Azuma, Ryosuke

2016-04-01

Off the Boso Peninsula, central Japan, where the Sagami Trough is in the south and the Japan Trench is in the east, there is a triple junction where the Pacific plate (PAC), the Philippine Sea plate (PHS) and the Honshu island arc (HIA) meet each other. In this region, the PAC subducts beneath the PHS and the HIA, and the PHS subducts beneath the HIA. Due to the subduction of 2 oceanic plates, numerous seismic events took place in the past. In order to understand these events, it is important to image structure of these plates. Hence, many researchers attempted to reveal the substructure from natural earthquakes and seismic experiments. Because most of the seismometers are placed inland area and the regular seismicity off Boso is inactive, it is difficult to reveal the precise substructure off Boso area using only natural earthquakes. Although several marine seismic experiments using active sources were conducted, vast area remains unclear off Boso Peninsula. In order to improve the situation, a marine seismic experiment, using airgun as an active source, was conducted from 30th July to 4th of August, 2009. The survey line has 216 km length and 20 Ocean Bottom Seismometers (OBSs) were placed on it. We estimated 2-D P-wave velocity structure from the airgun data using the PMDM (Progressive Model Development Method; Sato and Kenett, 2000) and the FAST (First Arrival Seismic Tomography ; Zelt and Barton, 1998). Furthermore, we identified the probable reflection phases from the data and estimated the location of reflectors using Travel time mapping method (Fujie et al. 2006). We found some reflection phases from the data, and the reflectors are located near the region where P-wave velocity is 5.0 km/s. We interpret that the reflectors indicate the plate boundary between the PHS and the HIA. The variation of the intensity of reflection along the upper surface of PHS seems to be consistent with the result from previous reflection seismic experiment conducted by Kimura et

KE Basin monorail modification for the sludge removal and packaging project

International Nuclear Information System (INIS)

Orbeta, C.B.

1995-01-01

The 105KE Basin currently stores over 1,100 metric tons of various N Reactor spent fuel in several canister forms, as well as several metric tons of sludge which must be removed. Modifications will consist of anchoring a permanent steel frame directly into the pit walls between existing columns and adding two travelling hoist rails, each capable of two directional motions. Each pit will have its own capability for targeting loads to any point inside the working areas of these pits. The structural frame designed for the monorail system at the Weasel and Tech-View pits was qualified as adequate for normal/operating loads, and dead plus live loads combined with seismic loads. The hoist operating live load is limited to 2,000 lb. The physical strength of the existing pit walls where the base plates are to be structurally anchored is unknown. The original structural drawings specified a minimum concrete strength of 3,000 lb/in 2 . A pullout test should be performed to verify the strength of this concrete base. To reduce radiation exposure to levels as low as reasonably achievable (ALARA), installation and erection work inside the basin controlled area must be minimized; therefore, the pieces required for the modifications should be numbered in the fabrication shop, and erection should follow a procedure that corresponds to the assembly sequence indicated by the numbers. In conjunction with final erection, a mock-up activity should be conducted and base-plate locations verified to be within dimensional tolerances

KE Basin monorail modification for the sludge removal and packaging project

Energy Technology Data Exchange (ETDEWEB)

Orbeta, C.B.

1995-02-06

The 105KE Basin currently stores over 1,100 metric tons of various N Reactor spent fuel in several canister forms, as well as several metric tons of sludge which must be removed. Modifications will consist of anchoring a permanent steel frame directly into the pit walls between existing columns and adding two travelling hoist rails, each capable of two directional motions. Each pit will have its own capability for targeting loads to any point inside the working areas of these pits. The structural frame designed for the monorail system at the Weasel and Tech-View pits was qualified as adequate for normal/operating loads, and dead plus live loads combined with seismic loads. The hoist operating live load is limited to 2,000 lb. The physical strength of the existing pit walls where the base plates are to be structurally anchored is unknown. The original structural drawings specified a minimum concrete strength of 3,000 lb/in{sup 2}. A pullout test should be performed to verify the strength of this concrete base. To reduce radiation exposure to levels as low as reasonably achievable (ALARA), installation and erection work inside the basin controlled area must be minimized; therefore, the pieces required for the modifications should be numbered in the fabrication shop, and erection should follow a procedure that corresponds to the assembly sequence indicated by the numbers. In conjunction with final erection, a mock-up activity should be conducted and base-plate locations verified to be within dimensional tolerances.

Uranium(VI) Reduction by Nanoscale Zerovalent Iron in Anoxic Batch Systems

International Nuclear Information System (INIS)

Yan, Sen; Hua, Bin; Bao, Zhengyu; Yang, John; Liu, Chongxuan; Deng, Baolin

2010-01-01

This study investigated the influences of pH, bicarbonate, and calcium on U(VI) adsorption and reduction by synthetic nanosize zero valent iron (nano Fe 0 ) particles under an anoxic condition. The results showed that about 87.1%, 82.7% and 78.3% of U(VI) could be reduced within 96 hours in the presence of 10 mM bicarbonate at pHs 6.92, 8.03 and 9.03, respectively. The rates of U(VI) reduction and adsorption by nano Fe 0 , however, varied significantly with increasing pH and concentrations of bicarbonate and/or calcium. Solid phase analysis by X-ray photoelectron spectroscopy confirmed the formation of UO 2 and iron (hydr)oxides as a result of the redox interactions between adsorbed U(VI) and nano Fe 0 . This study highlights the potential important role of groundwater chemical composition in controlling the rates of U(VI) reductive immobilization using nano Fe 0 in subsurface environments.

Metals recovery of spent household batteries using a hydrometallurgical process

International Nuclear Information System (INIS)

Souza, K.P.; Tenorio, J.A.S.

2010-01-01

The objective of the work is to study a method for metals recovery from a sample composed by a mixture of the main types of spent household batteries. Segregation of the main metals is investigated using a treatment route consisting of the following steps: manual identified and dismantling, grinding, electric furnace reduction, acid leaching and selective precipitation with sodium hydroxide with and without hydrogen peroxide. Before and after precipitations the solutions had been analyzed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP/OES) and the precipitated analyzed by Scanning Electron Microscopy (SEM) with Spectrometry of Energy Dispersion Spectroscopy (EDS). The results had indicated that the great majority of metals had been precipitated in pHs studied, also had co-precipitation or simultaneous precipitation of metals in some pHs. (author)

Metals recovery of spent household batteries using a hydrometallurgical process; Recuperacao de metais de sucatas de pilhas e baterias pos-consumo utilizando processamento hidrometalurgico

Energy Technology Data Exchange (ETDEWEB)

Souza, K.P.; Tenorio, J.A.S., E-mail: kprovazi@gmail.co [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Engenharia Metalurgica e de Materiais

2010-07-01

The objective of the work is to study a method for metals recovery from a sample composed by a mixture of the main types of spent household batteries. Segregation of the main metals is investigated using a treatment route consisting of the following steps: manual identified and dismantling, grinding, electric furnace reduction, acid leaching and selective precipitation with sodium hydroxide with and without hydrogen peroxide. Before and after precipitations the solutions had been analyzed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP/OES) and the precipitated analyzed by Scanning Electron Microscopy (SEM) with Spectrometry of Energy Dispersion Spectroscopy (EDS). The results had indicated that the great majority of metals had been precipitated in pHs studied, also had co-precipitation or simultaneous precipitation of metals in some pHs. (author)

Canada’s highest court unchains injection drug users; implications for harm reduction as standard of healthcare

Directory of Open Access Journals (Sweden)

Small Dan

2012-07-01

Full Text Available Abstract North America’s only supervised injection facility, Insite, opened its doors in September of 2003 with a federal exemption as a three-year scientific study. The results of the study, evaluated by an independent research team, showed it to be successful in engaging the target group in healthcare, preventing overdose death and HIV infections while increasing uptake and retention in detox and treatment. The research, published in peer-reviewed medical and scientific journals, also showed that the program did not increase public disorder, crime or drug use. Despite the substantial evidence showing the effectiveness of the program, the future of Insite came under threat with the election of a conservative federal government in 2006. As a result, the PHS Community Services Society (PHS, the non-profit organization that operates Insite, launched a legal case to protect the program. On 30 September 2011, Supreme Court of Canada ruled in favour of Insite and underscored the rights of people with addictions to the security of their person under section 7 of the Charter of Rights and Freedoms (Charter of Rights. The decision clears the ground for other jurisdictions in Canada, and perhaps North America, to implement supervised injection and harm reduction where it is epidemiologically indicated. The legal case validates the personhood of people with addictions while metaphorically unchaining them from the criminal justice system.

Manganese Coated Sand for Copper (II Removal from Water in Batch Mode

Directory of Open Access Journals (Sweden)

Nidal Hilal

2013-09-01

Full Text Available Removal of heavy metals, such as copper ions, from water is important to protect human health and the environment. In this study, manganese coated sand (MCS was used as an adsorbent to remove copper ions in a batch system. Equilibrium data were determined at a temperature of 25.6 °C and the Langmuir model was used to describe the experimental data. Mn-coating improved the removal of copper ions by 70% as compared to uncoated sand. Based on a kinetics study, the adsorption of copper ions on MCS was found to occur through a chemisorption process and the pseudo-second-order model was found to fit the kinetics experimental data well. Due to particle interactions, the equilibrium uptake was reduced as the ratio of sand to volume of solution increased. pH affected the removal of copper ions with lowest uptakes found at pH 3 and pHs >7, whilst at pHs in the range of 4 to 7, the uptake was highest and almost constant at the value of 0.0179 mg/g ± 4%. This study has also revealed that copper ions removal was dissolved oxygen (DO dependent with the highest removal occurring at ambient DO concentration, which suggests that DO should be carefully studied when dealing with copper ions adsorption.

29 CFR 1919.28 - Unit proof tests-cranes and gear accessory thereto.

Science.gov (United States)

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Unit proof tests-cranes and gear accessory thereto. 1919.28... Loads; Heat Treatment; Competent Persons § 1919.28 Unit proof tests—cranes and gear accessory thereto. (a) Except as noted in paragraph (e) of this section, cranes and other hoisting machines, together...

Physician/patient relationship: any limit to confidentiality? | Eresia ...

African Journals Online (AJOL)

It is within this framework that the study is hoisted to explore if there exists any value-ladden gauge which regulates or guides the choice medical practitioners make when faced with such challenge. Within this purview, the study advances the position that health practioners, especially, doctors should align themselves to the ...

29 CFR 1917.116 - Elevators and escalators.

Science.gov (United States)

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Elevators and escalators. 1917.116 Section 1917.116 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) MARINE TERMINALS Terminal Facilities § 1917.116 Elevators and escalators. (a) “Elevator” means a permanent hoisting and lowering...

29 CFR 1917.42 - Miscellaneous auxiliary gear.

Science.gov (United States)

2010-07-01

... wire rope used in hoisting or lowering, or in bulling cargo, shall consist of one continuous piece... splices shall consist of at least three full tucks. Short splices shall consist of at least six full tucks... slings. (1) Slings and nets or other combinations of more than one piece of synthetic webbing assembled...

Container crane for sea freight containers

NARCIS (Netherlands)

Luttekes, E.; Rijsenbrij, J.C.

2001-01-01

The invention relates to a container crane for loading and unloading seaborne containers. The container crane comprises a bridge girder (7), a jib (8), at least two crabs (11, 12) which can travel along the said bridge girder and/or jib and are provided with hoist means for lifting and lowering the

O pH da calda de aplicação e a absorção de ácido giberélico por frutas de laranja cv. ‘Valência’ The solution pH on gibberellic acid uptake by cv. ‘Valência’ orange fruits

Directory of Open Access Journals (Sweden)

João Guilherme Casagrande Jr.

1999-10-01

Full Text Available Com o objetivo de estudar os efeitos que o ácido giberélico causa em frutas de laranja ‘Valência’, quando aplicado em diferentes concentrações, e também sob diferentes pH na calda de aplicação, foi realizado experimento onde os tratamentos consistiram de 5 concentrações (0, 5, 10, 15 e 20 ppm e 3 pHs (3, 4,5 e 6. A aplicação foi feita em maio, quando as frutas estavam com coloração verde-amarelada, e as coletas para avaliação feitas a cada 30 dias, até o mês de novembro. Foram feitas 7 coletas no total. As variáveis estudadas foram coloração da epiderme, espessura da casca, pH do suco, acidez total titulável (ATT, teor de sólidos solúveis totais (SST, relação SST/ATT, índice tecnológico e rendimento de suco. Os resultados obtidos não permitiram concluir que o ácido giberélico tenha influência sobre as características fisico-químicas do suco, tais como pH, rendimento, SST, AT, Ratio e índice tecnológico. A espessura da casca também não foi influenciada pelo AG3. No entanto, o ácido giberélico reteve a coloração verde da casca, segundo um gradiente no que diz respeito à concentração, no sentido de que ao aumentá-la, manteve por mais tempo a coloração verde das frutas. Este comportamento foi observado em maior ou menor escala, em todos os pHs da solução. O pH=3 da calda de aplicação foi o que reteve por mais tempo a coloração verde nas frutas, indicando assim que o ácido giberélico foi mais absorvido neste pH, do que nos demais. O pH normal (4,5 reteve a coloração verde das frutas por mais tempo que o pH=6, indicando assim que pHs mais ácidos favorecem a absorção do ácido giberélico pelas plantas. Foi observado também que o ácido giberélico atrasou o fenômeno do reverdecimento, o qual ocorre quando as temperaturas se tornam mais altas.The objective of this work was to study the effect of gibberellic acid on "Valência" orange fruits, when applied at various concentrations, under

77 FR 65560 - Agency Information Collection Activities; Submission for Office of Management and Budget Review...

Science.gov (United States)

2012-10-29

... Prevention. 3.2.2 Document collaboration with accredited 312.52 microbiology labs.. 3.2.3 Procedures to... documented procedures; record standard veterinary care. 3.2.6 Animal facility SOPs PHS Policy \\1\\ 3.3.3...

Development of Y-shaped peptide for constructing nanoparticle systems targeting tumor-associated macrophages in vitro and in vivo

International Nuclear Information System (INIS)

Yan, Lu; Gao, Yunxiang; Pierce, Ryan; Dai, Liming; Kim, Julian; Zhang, Mei

2014-01-01

Tumor-associated macrophage (TAM) is increasingly being viewed as a target of great interest in tumor microenvironment due to its important role in the progression and metastasis of cancers. It has been shown that TAM indeed overexpresses unique surface marker legumain. In this study, we designed and synthesized a Y-shaped legumain-targeting peptide (Y-Leg) with functional groups allowing for further conjugation with imaging and therapeutic moieties (vide infra). The in vitro cell experiments using FITC-conjugated Y-Leg revealed its specific and selective interaction with M2-polarized macrophages (i.e., TAMs) with preference to M1 macrophages, and that the interaction was not interfered with by conjugating FITC to its functional group. Further, we constructed a nanotube system by grafting Y-Leg onto oxidized carbon nanotubes (OCNTs) loaded with paramagnetic Fe 3 O 4 nanoparticles. The intravenous injection of the resultant Y-Leg-OCNT/Fe 3 O 4 nanotubes to 4T1 mammary tumor-bearing mouse led to the magnetic resonance imaging (MRI) of TAM-infiltrated tumor microenvironment, revealing the targeting specificity of Y-Leg-conjugated nanotubes in vivo. The Y shape of peptide and its functional groups containing amines and imidazole can protonate at different pHs, contributing to the in vitro and in vivo targeting specificity. This study represents the first development of novel peptide and peptide-grafted nanotube system targeting M2-polarized TAMs in vivo. The methodology developed in this study is applicable to the construction of various multifunctional nanoparticle systems for selectively targeting, imaging and manipulating of TAMs for the diagnosis and treatment of cancers and inflammatory diseases identified with macrophage-infiltrated disease tissue. (papers)

Program grants for black lung clinics--PHS. Notice of proposed rulemaking.

Science.gov (United States)

1983-11-01

The Public Health Service proposed to revise the regulations governing the grants program for black lung clinics established under section 427(a) of the Federal Mine Safety and Health Act of 1977. The revision is in keeping with the Department of Health and Human Services' desire to remove as many programmatic burdens and restrictions from grantees as possible, while maintaining program integrity.

Kids' Quest: ADHD

Science.gov (United States)

... you can watch this video from YouTube. The Blueprint Matt Morgan On ADHD Return to Steps Movies ... of CDC, the Department of Health and Human Services (HHS), or the U.S. Public Health Service (PHS). ...

Transfer station and method for loading and/or unloading containers from a ship

NARCIS (Netherlands)

Evers, J.J.M.

2003-01-01

Containers are transported with at least one quay crane (10) from and/or to a ship (14) along a quay (19). The quay crane (10) has a hoisting range comprising a first vehicle-positioning strip (26) on a quay surface. Depending on whether other vehicles (16, 17) are present or not on the positioning

29 CFR 1918.81 - Slinging.

Science.gov (United States)

2010-07-01

... unitized loads during hoisting shall be employed to ensure safe lifting of such loads having damaged... the winch or crane operator(s) can clearly see the draft itself or see the signals of a signalman who... or descending lifting gear. (l) The employer shall not permit employees to ride the hook or the load...

29 CFR 1917.46 - Load indicating devices.

Science.gov (United States)

2010-07-01

... hoisting other lifts by means of a lifting beam supplied by the crane manufacturer for the purpose, and in...) Except as provided in paragraph (a)(1)(viii) of this section, every crane after October 3, 1984 shall be... this by referencing a weight indication to crane ratings posted and visible to the operator, except...

Engineering considerations for the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Scully, L.W.

1978-01-01

The WIPP, located at Los Medanos in New Mexico, is to be used for DOE transuranic and high-level defense wastes. On the surface, there are contact-handled and remote-handled waste facilities. Package size, delivery rates, shipping, shielding and thermal considerations, underground transport and emplacement, retrievability, ventilation, and hoist conveyence safety are discussed

Thermal properties of Fiber ropes

DEFF Research Database (Denmark)

Bossolini, Elena; Nielsen, Ole Wennerberg; Oland, Espen

There is a trend within the oil and gas market to shift from steel wire ropes to fiber ropes for lifting, hoisting and mooring applications. The cost of fiber ropes is about 2-3 times that of steel wire ropes, but the natural buoyancy of fiber ropes reduces the overall weight resulting in smaller...

Improvement of the M/S manipulator maintenance at OSL

International Nuclear Information System (INIS)

Kuwana, Koichi; Ouchi, Hiroshi; Ito, Yutaka; Sato, Yoshihiro; Midorikawa, Mituhiro; Hayakawa, Tuyoshi

2010-01-01

The safeguards inspection samples from the JNFL Rokkasho Reprocessing Plant (RRP) are received and analyzed at the On Site Laboratory (OSL). Since the samples from the input accountancy tank of the RRP contain a lot of fission products, they are treated in a hot-cell line with a M/S (Master /Slave) manipulator. Special equipment and tools were used for the maintenance of the M/S manipulator, especially for the exchange of the M/S manipulator. However, the manipulator exchange work was not easy due to the limitation of the space in the OSL. For solution to this problem, a monorail and monorail hoist equipment was installed onto wall surface of analytical room close to each M/S manipulator, and then it made the exchange of M/S manipulator easy without special equipment and tools. Additionally, operator was freed from the burden of working space arranging for the exchange of M/S manipulator such as removing of analytical equipments. This report represents the improvement of operation for the exchange of M/S manipulator with installation of monorail and hoist equipment. (author)

33 CFR 143.405 - Equipment.

Science.gov (United States)

2010-07-01

... “The Ship's Medicine Chest and Medical Aid at Sea”, DHHS Publication No. (PHS) 84-2024, available from... industrial first aid kit sized for 50 percent of the number of persons on the most populated facility that...

Essential roles of insulin, AMPK signaling and lysyl and prolyl hydroxylases in the biosynthesis and multimerization of adiponectin.

Science.gov (United States)

Zhang, Lin; Li, Ming-Ming; Corcoran, Marie; Zhang, Shaoping; Cooper, Garth J S

2015-01-05

Post-translational modifications (PTMs) of the adiponectin molecule are essential for its full bioactivity, and defects in PTMs leading to its defective production and multimerization have been linked to the mechanisms of insulin resistance, obesity, and type-2 diabetes. Here we observed that, in differentiated 3T3-L1 adipocytes, decreased insulin signaling caused by blocking of insulin receptors (InsR) with an anti-InsR blocking antibody, increased rates of adiponectin secretion, whereas concomitant elevations in insulin levels counteracted this effect. Adenosine monophosphate-activated protein kinase (AMPK) signaling regulated adiponectin production by modulating the expression of adiponectin receptors, the secretion of adiponectin, and eventually the expression of adiponectin itself. We found that lysyl hydroxylases (LHs) and prolyl hydroxylases (PHs) were expressed in white-adipose tissue of ob/ob mice, wherein LH3 levels were increased compared with controls. In differentiated 3T3-L1 adipocytes, both non-specific inhibition of LHs and PHs by dipyridyl, and specific inhibition of LHs by minoxidil and of P4H with ethyl-3,4-dihydroxybenzoate, caused significant suppression of adiponectin production, more particularly of the higher-order isoforms. Transient gene knock-down of LH3 (Plod3) caused a suppressive effect, especially on the high molecular-weight (HMW) isoforms. These data indicate that PHs and LHs are both required for physiological adiponectin production and in particular are essential for the formation/secretion of the HMW isoforms. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Aluminum elution and precipitation in glass vials: effect of pH and buffer species.

Science.gov (United States)

Ogawa, Toru; Miyajima, Makoto; Wakiyama, Naoki; Terada, Katsuhide

2015-02-01

Inorganic extractables from glass vials may cause particle formation in the drug solution. In this study, the ability of eluting Al ion from borosilicate glass vials, and tendencies of precipitation containing Al were investigated using various pHs of phosphate, citrate, acetate and histidine buffer. Through heating, all of the buffers showed that Si and Al were eluted from glass vials in ratios almost the same as the composition of borosilicate glass, and the amounts of Al and Si from various buffer solutions at pH 7 were in the following order: citrate > phosphate > acetate > histidine. In addition, during storage after heating, the Al concentration at certain pHs of phosphate and acetate buffer solution decreased, suggesting the formation of particles containing Al. In citrate buffer, Al did not decrease in spite of the high elution amount. Considering that the solubility profile of aluminum oxide and the Al eluting profile of borosilicate glass were different, it is speculated that Al ion may be forced to leach into the buffer solution according to Si elution on the surface of glass vials. When Al ions were added to the buffer solutions, phosphate, acetate and histidine buffer showed a decrease of Al concentration during storage at a neutral range of pHs, indicating the formation of particles containing Al. In conclusion, it is suggested that phosphate buffer solution has higher possibility of forming particles containing Al than other buffer solutions.

Perceptions of health status, medication side effects and depression after successful renal transplantation

International Nuclear Information System (INIS)

Kamran, F.; Masood, A.

2017-01-01

Objective: To investigate the perceptions of health status and depression among Renal Transplant Recipients (RTRs). Stydy Design: A longitudinal research design was used. Methods: Recipients’ perceived health status (PHS) was measured by a self-developed questionnaire that reflected the symptom severity and frequency of common immunosuppressant side effects. Depression levels were assessed using Beck Depression Inventory B.D.I II) .The sample population comprised of RTRs with a successful and healthy renal transplant recruited from private and government sector renal units in Lahore, Pakistan. Results: Recipients with poorer perceptions of health status tend to be more depressed as indicated by significant negative correlations between PHS and depression. However, further regression analysis found both constructs as significant predictors of each other, raising a question of causal direction. A cross lagged correlation analysis indicated that PHS appears to be a stronger predictor of depression comparatively. Most recipients tend to have positive perceptions of their health status (M = 30.84, S.D = 3.64) with minimum to moderate level of depression (M = 9.50, S.D = 4.00), It is found that a positive perception of health status is associated with lowered depression. Conclusion: Most recipients’ with a healthy kidney transplant tend to report a positive perception of their health status despite adverse medication side effects. However, the perceived health status is significantly associated with consequent feeling of depression. The study confirms the efficacy and positive health outcomes of renal transplantation in Pakistan. (author)

Spatial and temporal structure of typhoid outbreaks in Washington, D.C., 1906–1909: evaluating local clustering with the Gi* statistic

Directory of Open Access Journals (Sweden)

Curtis Andrew

2006-03-01

Full Text Available Abstract Background To better understand the distribution of typhoid outbreaks in Washington, D.C., the U.S. Public Health Service (PHS conducted four investigations of typhoid fever. These studies included maps of cases reported between 1 May – 31 October 1906 – 1909. These data were entered into a GIS database and analyzed using Ripley's K-function followed by the Gi* statistic in yearly intervals to evaluate spatial clustering, the scale of clustering, and the temporal stability of these clusters. Results The Ripley's K-function indicated no global spatial autocorrelation. The Gi* statistic indicated clustering of typhoid at multiple scales across the four year time period, refuting the conclusions drawn in all four PHS reports concerning the distribution of cases. While the PHS reports suggested an even distribution of the disease, this study quantified both areas of localized disease clustering, as well as mobile larger regions of clustering. Thus, indicating both highly localized and periodic generalized sources of infection within the city. Conclusion The methodology applied in this study was useful for evaluating the spatial distribution and annual-level temporal patterns of typhoid outbreaks in Washington, D.C. from 1906 to 1909. While advanced spatial analyses of historical data sets must be interpreted with caution, this study does suggest that there is utility in these types of analyses and that they provide new insights into the urban patterns of typhoid outbreaks during the early part of the twentieth century.

Analysis of image factors of x-ray films : study for the intelligent replenishment system of automatic film processor

Energy Technology Data Exchange (ETDEWEB)

Park, Sung Tae; Yoon, Chong Hyun; Park, Kwang BO; Auh, Yong Ho; Lee, Hyoung Jin; In, Kyung Hwan; Kim, Keon Chung [Asan Medical Center, Ulsan Univ. College of Medicine, Ulsan (Korea, Republic of)

1998-06-01

We analyzed image factors to determine the characteristic factors that need for intelligent replenishment system of the auto film processor. We processed the serial 300 sheets of radiographic films of chest phantom without replenishment of developing and fixation replenisher. We took the digital data by using film digitizer which scanned the films and automatically summed up the pixel values of the films. We analyzed characteristic curves, average gradients and relative speeds of individual film using densitometer and step densitometry. We also evaluated the pH of developer, fixer, and washer fluid with digital pH meter. Fixer residual rate and washing effect were measured by densitometer using the reagent methods. There was no significant reduction of the digital density numbers of the serial films without replenishment of developer and fixer. The average gradients were gradually decreased by 0.02 and relative speeds were also gradually decreased by 6.96% relative to initial standard step-densitometric measurement. The pHs of developer and fixer were reflected the inactivation of each fluid. The fixer residual rates and washing effects after processing each 25 sheets of films were in the normal range. We suggest that the digital data are not reliable due to limitation of the hardware and software of the film digitizer. We conclude that average gradient and relative speed which mean the film's contrast and sensitivity respectively are reliable factors for determining the need for the replenishment of the auto film processor. We need more study of simpler equations and programming for more intelligent replenishment system of the auto film processor.

Zethrenes, Extended p -Quinodimethanes, and Periacenes with a Singlet Biradical Ground State

KAUST Repository

Sun, Zhe; Zeng, Zebing; Wu, Jishan

2014-01-01

are also challenging to physically characterize and require the use of various experimental techniques and theoretic methods to comprehensively describe their unique properties.In this Account, we will discuss the chemistry and physics of three types of PHs

The importance of OH − transport through anion exchange membrane in microbial electrolysis cells

KAUST Repository

Ye, Yaoli; Logan, Bruce

2018-01-01

In two-chamber microbial electrolysis cells (MECs) with anion exchange membranes (AEMs), a phosphate buffer solution (PBS) is typically used to avoid increases in catholyte pH as Nernst equation calculations indicate that high pHs adversely impact

Improvement of sweating model in 2-Node Model and its application to thermal safety for hot environments

Energy Technology Data Exchange (ETDEWEB)

Ooka, Ryozo [Institute of Industrial Science, The University of Tokyo, 4-6-1 Komaba Meguro-ku, Tokyo 153 8505 (Japan); Minami, Yuriko [Tokyo Electric Power Company, Tokyo (Japan); Sakoi, Tomonori [International Young Researchers Empowerment Center, Shinshu University, Nagano (Japan); Tsuzuki, Kazuyo [National Institute of Advanced Industrial Science and Technology, Tsukuba (Japan); Rijal, H.B. [Integrated Research System for Sustainability Science, The University of Tokyo, Tokyo (Japan)

2010-07-15

Recently, due to global warming and the heat-island effect, more and more people are exposed to the dangers of heat disorders. A hot thermal environment can be evaluated using various indices, such as new Standard Effective Temperature (SET{sup *}) using the 2-Node Model (2 NM), Wet Bulb Globe Temperature (WBGT), Predicted Heat Strain (PHS) model, and so on. The authors aim to develop a safety evaluation approach for hot environments. Subject experiments are performed in a laboratory to comprehend the physiological response of the human body. The results are compared with the computed values from the 2 NM and PHS models, and improved the sweating model in 2 NM in order to take into account the relationship with metabolic rate. A demonstration is provided of using the new sweating model for evaluating thermal safety in a hot environment. (author)

29 CFR 1910.261 - Pulp, paper, and paperboard mills.

Science.gov (United States)

2010-07-01

... tender shall be required to signal the hoisting engineer to move the load only after the men working in.... Hydraulic barkers shall be enclosed with strong baffles at the inlet and the outlet. The operator shall be... out with water, and fresh air shall be blown into them before allowing men to enter. Men entering the...

Fiscal 2000 achievement report. Welfare technosystem research and development (Kamogawa); 2000 nendo welfare technosystem kenkyu kaihatsu (Kamogawa) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of assisting in-home medical care, a system to enable in-home acquisition, compression, accumulation, distribution, and regeneration of auscultatory sounds (cardiac sound, respiratory sound) is added to telemedicine assisting system technologies for remotely located doctors' decisions and instructions for in-home medical care. In fiscal 2000, for improvement on the already-developed system, operationality was improved, uptake was realized of still images (digital camera pictures) mainly for diseases in dematology where such is strongly demanded, and a transmitter function was augmented. The system enables the PHS (personal handyphone system) aided exchange of medical data between portable terminals on patrol and (doctors') personal computers through the personal computer server in the hospital. Doctors are able to administer remote telemedicine now that biomimetic information on remotely located patients such as still medical images and auscultatory sounds necessary for diagnosing is available in the hospital. (NEDO)

ST-HM not only cranes

CERN Document Server

Bertone, C

2002-01-01

This period of LEP dismantling and LHC installation is a real challenge for the ST-HM group. The group is now following several projects to cope with the diversity of requests. Although crane design and procurement still constitutes the majority of the workload, more and more of our time is nowadays dedicated to providing alternative handling solutions. In 2001/2002, our main studies concern cranes for LHC, industrial and shielded motorised doors, the upgrade/replacement of 32 lifts and mobile cranes. The years 2002/2003 will concern mainly the study of LHC handling systems such as trailers and heavy-duty tractors, specifically tailored containers and tools. In parallel, the monorail will be extended in the injection tunnel and CNGS tunnels and a new monorail system for TOF will be installed. Since the tunnel monorail infrastructure will be used for power feed and guidance purposes only, this requires that other transport systems be studied, such as forklift trucks, industrial and telescopic hoists.

Operating manual for the Tower Shielding Facility

International Nuclear Information System (INIS)

1985-12-01

This manual provides information necessary to operate and perform maintenance on the reactor systems and all equipment or systems which can affect their operation or the safety of personnel at the Tower Shielding Facility. The first four chapters consist of introductory and descriptive material of benefit to personnel in training, the qualifications required for training, the responsibilities of the personnel in the organization, and the procedures for reviewing proposed experiments. Chapter 8, Emergency Procedures, is also a necessary part of the indoctrination of personnel. The procedures for operation of the Tower Shielding Reactor (TSR-II), its water cooling system, and the main tower hoists are outlined in Chapters 5, 6, and 7. The Technical Specification surveillance requirements for the TSR-II are summarized in Chapter 9. The maintenance and calibration schedule is spelled out in Chapter 10. The procedures for assembly and disassembly of the TSR-II are outlined in Chapter 11

76 FR 17423 - Laboratory Animal Welfare: Proposed Adoption and Implementation of the Eighth Edition of the...

Science.gov (United States)

2011-03-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Laboratory Animal Welfare... available. FOR FURTHER INFORMATION CONTACT: Office of Laboratory Animal Welfare, Office of Extramural... Animal Welfare Act and other Federal statutes and regulations relating to animal activities. The PHS...

42 CFR 417.165 - Reapplication for qualification.

Science.gov (United States)

2010-10-01

... SERVICES (CONTINUED) MEDICARE PROGRAM HEALTH MAINTENANCE ORGANIZATIONS, COMPETITIVE MEDICAL PLANS, AND HEALTH CARE PREPAYMENT PLANS Continued Regulation of Federally Qualified Health Maintenance Organizations... CMS for purposes of section 1310 of the PHS Act may, after completing the corrective action required...

45 CFR 94.3 - Definitions.

Science.gov (United States)

2010-10-01

... Technology Transfer (STTR) Program, which was established by Public Law 102-564. ... requirements of this part relating to financial interests, “Investigator” includes the Investigator's spouse... the PHS Act or other statutory authority. Significant Financial Interest means anything of monetary...

Analytical modeling of thin film neutron converters and its application to thermal neutron gas detectors

Energy Technology Data Exchange (ETDEWEB)

Piscitelli, F; Esch, P Van, E-mail: piscitelli@ill.fr [Institut Laue-Langevin (ILL), 6, Jules Horowitz, 38042 Grenoble (France)

2013-04-15

A simple model is explored mainly analytically to calculate and understand the PHS of single and multi-layer thermal neutron detectors and to help optimize the design in different circumstances. Several theorems are deduced that can help guide the design.

Remote Operation and Maintenance Demonstration Facility at the Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Burgess, T.W.

1986-01-01

The Remote Operation and Maintenance Demonstration (ROMD) Facility at the Oak Ridge National Laboratory has been developed by the Consolidated Fuel Reprocessing Program to demonstrate remote handling concepts on advanced nuclear fuel reprocessing equipment and for other programs of national interest. The ROMD facility is a large-volume high-bay area that encloses a complete, technologically advanced remote maintenance system and full-scale development reprocessing equipment. The maintenance system consists of a full complement of teleoperated manipulators, manipulator transport systems, and overhead hoists that provide the capability of performing a large variety of remote handling tasks. This system has been used to demonstrate remote manipulation techniques for the US Department of Energy (DOE), the Power Reactor and Nuclear Fuels Development Corporation of Japan, the US Navy, and the National Aeronautics and Space Administration. Extensive tests of manipulative systems and remote maintainability of process equipment have been performed. This paper describes the ROMD facility and key remote maintenance equipment and presents a summary of major experimental activities. 7 refs., 6 figs

Different host complement systems and their interactions with saliva from Lutzomyia longipalpis (Diptera, Psychodidae) and Leishmania infantum promastigotes.

Science.gov (United States)

Mendes-Sousa, Antonio Ferreira; Nascimento, Alexandre Alves Sousa; Queiroz, Daniel Costa; Vale, Vladimir Fazito; Fujiwara, Ricardo Toshio; Araújo, Ricardo Nascimento; Pereira, Marcos Horácio; Gontijo, Nelder Figueiredo

2013-01-01

Lutzomyia longipalpis is the vector of Leishmania infantum in the New World, and its saliva inhibits classical and alternative human complement system pathways. This inhibition is important in protecting the insect´s midgut from damage by the complement. L. longipalpis is a promiscuous blood feeder and must be protected against its host's complement. The objective of this study was to investigate the action of salivary complement inhibitors on the sera of different host species, such as dogs, guinea pigs, rats and chickens, at a pH of 7.4 (normal blood pH) and 8.15 (the midgut pH immediately after a blood meal). We also investigated the role of the chicken complement system in Leishmania clearance in the presence and absence of vector saliva. The saliva was capable of inhibiting classical pathways in dogs, guinea pigs and rats at both pHs. The alternative pathway was not inhibited except in dogs at a pH of 8.15. The chicken classical pathway was inhibited only by high concentrations of saliva and it was better inhibited by the midgut contents of sand flies. Neither the saliva nor the midgut contents had any effect on the avian alternative pathway. Fowl sera killed L. infantum promastigotes, even at a low concentration (2%), and the addition of L. longipalpis saliva did not protect the parasites. The high body temperature of chickens (40°C) had no effect on Leishmania viability during our assays. Salivary inhibitors act in a species-specific manner. It is important to determine their effects in the natural hosts of Leishmania infantum because they act on canid and rodent complements but not on chickens (which do not harbour the parasite). Moreover, we concluded that the avian complement system is the probable mechanism through which chickens eliminate Leishmania and that their high body temperature does not influence this parasite.

Conversion to use of digital chest images for surveillance of coal workers' pneumoconiosis (black lung).

Science.gov (United States)

Levine, Betty A; Ingeholm, Mary Lou; Prior, Fred; Mun, Seong K; Freedman, Matthew; Weissman, David; Attfield, Michael; Wolfe, Anita; Petsonk, Edward

2009-01-01

To protect the health of active U.S. underground coal miners, the National Institute for Occupational Safety and Health (NIOSH) has a mandate to carry out surveillance for coal workers' pneumoconiosis, commonly known as Black Lung (PHS 2001). This is accomplished by reviewing chest x-ray films obtained from miners at approximately 5-year intervals in approved x-ray acquisition facilities around the country. Currently, digital chest images are not accepted. Because most chest x-rays are now obtained in digital format, NIOSH is redesigning the surveillance program to accept and manage digital x-rays. This paper highlights the functional and security requirements for a digital image management system for a surveillance program. It also identifies the operational differences between a digital imaging surveillance network and a clinical Picture Archiving Communication Systems (PACS) or teleradiology system.

Efeitos da massa molar e do pH sobre o equilíbrio termodinâmico do sistema bifásico aquoso PEG/fosfatos

Directory of Open Access Journals (Sweden)

Juliana Ferrari Ferreira

2009-01-01

Full Text Available Aqueous two-phase systems have been largely used in research for separation and purification of biomolecules. These systems are obtained through the mixture of two polymers or one polymer and a salt solution. The main subject of this work was the characterization of aqueous two-phase systems from different poly (ethylene glycol with molecular weights of 1500, 4000 and 6000 and potassium phosphate salts at pH varying from 6 to 8 at standard conditions. It was observed a displacement of the binodal towards lower polymer concentrations when PEG molecular weights increased. On the other hand, the variation of pH did not promote significant alterations on the binodal. In the tie lines, it was not possible to stabilize the values of compositions influence, even when the polymers had been compared with themselves and different pHs.

Social and Emotional Wellbeing Screening for Aboriginal and Torres Strait Islanders within Primary Health Care: A Series of Missed Opportunities?

Directory of Open Access Journals (Sweden)

Erika Langham

2017-07-01

Full Text Available BackgroundSocial and emotional wellbeing (SEWB is a critical determinant of health outcomes for Indigenous Australians. This study examined the extent to which primary healthcare services (PHSs undertake SEWB screening and management of Aboriginal and Torres Strait Islander clients, and the variation in SEWB screening and management across Indigenous PHS.MethodsCross-sectional analysis between 2012 and 2014 of 3,407 Indigenous client records from a non-representative sample of 100 PHSs in 4 Australian states/territory was undertaken to examine variation in the documentation of: (1 SEWB screening using identified measurement instruments, (2 concern regarding SEWB, (3 actions in response to concern, and (4 follow up actions. Binary logistic regression was used to determine the factors associated with screening.ResultsThe largest variation in SEWB screening occurred at the state/territory level. The mean rate of screening across the sample was 26.6%, ranging from 13.7 to 37.1%. Variation was also related to PHS characteristics. A mean prevalence of identified SEWB concern was 13% across the sample, ranging from 9 to 45.1%. For the clients where SEWB concern was noted, 25.4% had no referral or PHS action recorded. Subsequent internal PHS follow up after 1 month occurred in 54.7% of cases; and six-monthly follow up of referrals to external services occurred in 50.9% of cases.ConclusionOur findings suggest that the lack of a clear model or set of guidelines on best practice for screening for SEWB in Indigenous health may contribute to the wide variation in SEWB service provision. The results tell a story of missed opportunities: 73.4% of clients were not screened and no further action was taken for 25.4% for whom an SEWB concern was identified. There was no follow up for just under half of those for whom action was taken. There is a need for the development of national best practice guidelines for SEWB screening and management, accompanied by

Social and Emotional Wellbeing Screening for Aboriginal and Torres Strait Islanders within Primary Health Care: A Series of Missed Opportunities?

Science.gov (United States)

Langham, Erika; McCalman, Janya; Matthews, Veronica; Bainbridge, Roxanne Gwendalyn; Nattabi, Barbara; Kinchin, Irina; Bailie, Ross

2017-01-01

Social and emotional wellbeing (SEWB) is a critical determinant of health outcomes for Indigenous Australians. This study examined the extent to which primary healthcare services (PHSs) undertake SEWB screening and management of Aboriginal and Torres Strait Islander clients, and the variation in SEWB screening and management across Indigenous PHS. Cross-sectional analysis between 2012 and 2014 of 3,407 Indigenous client records from a non-representative sample of 100 PHSs in 4 Australian states/territory was undertaken to examine variation in the documentation of: (1) SEWB screening using identified measurement instruments, (2) concern regarding SEWB, (3) actions in response to concern, and (4) follow up actions. Binary logistic regression was used to determine the factors associated with screening. The largest variation in SEWB screening occurred at the state/territory level. The mean rate of screening across the sample was 26.6%, ranging from 13.7 to 37.1%. Variation was also related to PHS characteristics. A mean prevalence of identified SEWB concern was 13% across the sample, ranging from 9 to 45.1%. For the clients where SEWB concern was noted, 25.4% had no referral or PHS action recorded. Subsequent internal PHS follow up after 1 month occurred in 54.7% of cases; and six-monthly follow up of referrals to external services occurred in 50.9% of cases. Our findings suggest that the lack of a clear model or set of guidelines on best practice for screening for SEWB in Indigenous health may contribute to the wide variation in SEWB service provision. The results tell a story of missed opportunities: 73.4% of clients were not screened and no further action was taken for 25.4% for whom an SEWB concern was identified. There was no follow up for just under half of those for whom action was taken. There is a need for the development of national best practice guidelines for SEWB screening and management, accompanied by dedicated SEWB funding, and training for health

Relação entre nível geral de saúde, dor musculoesquelética e síndrome de burnout em professores universitários Relationship between general level of health, musculoeskeletal pain and occurrence of burnout syndrome in college teachers

Directory of Open Access Journals (Sweden)

Eneida Yuri Suda

2011-09-01

Full Text Available O objetivo desse estudo foi verificar a relação entre nível de saúde geral, dor musculoesquelética, frequência de sintomas musculoesqueléticos e a síndrome de burnout em professores universitários. Foram avaliados 50 professores de uma universidade privada. O nível de saúde geral foi verificado pela versão em português da Personal Health Scale (PHS-Pt, a dor musculoesquelética pelo Questionário Nórdico de Sintomas Osteomusculares (QNSO e a presença da síndrome de burnout pelo questionário Maslach Burnout Inventory - Human Services Survey (MBI-HSS. A maioria dos professores apresentou comprometimento do nível de saúde (escore total PHS-Pt=6,7±3,8, sendo que 70% apresentaram dor no pescoço e 64% na região lombar nos últimos 12 meses. Houve correlação positiva entre nível geral de saúde e a dimensão exaustão emocional do inventário de burnout. Porém, não houve correlação entre as dimensões do MBI-HSS e dor musculoesquelética.The aim of this study was to verify the relationship between general level of health, muskuloeskeletal pain and occurrence of burnout syndrome in college teachers. Fifty teachers from a private university were evaluated. The level of general health was evaluated by the Portuguese version of the Personal Health Scale (PHS-Pt, muskuloeskeletal pain was verified by Nordic Muskuloeskeletal Questionnaire (NMQ and the occurrence of burnout syndrome was evaluated by the Portuguese version of the Maslach Burnout Inventory - Human Services Survey (MBI-HSS. The majority of the sample presented some compromising of general health level (total score PHS-Pt=6.7±3.8 with 70% presenting neck pain and 64% presenting lower back pain in the last year. Positive correlation occurred between burnout exhaustion dimension and level of general health. There were no correlation between MBI-HSS dimensions and muskuloeskeletal pain occurrence in the last year.

Historical Origins of the Tuskegee Experiment: The Dilemma of Public Health in the United States

Directory of Open Access Journals (Sweden)

Jinbin PARK

2017-12-01

Full Text Available The Tuskegee Study of Untreated Syphilis in the Negro Male was an observational study on African-American males in Tuskegee, Alabama between 1932 and 1972. The U. S. Public Health Service ran this study on more than 300 people without notifying the participants about their disease nor treating them even after the introduction of penicillin. The study included recording the progress of disease and performing an autopsy on the deaths. This paper explores historical backgrounds enabled this infamous study, and discusses three driving forces behind the Tuskegee Study. First, it is important to understand that the Public Health Service was established in the U. S. Surgeon General’s office and was operated as a military organization. Amidst the development of an imperial agenda of the U.S. in the late 19th and early 20th centuries, the PHS was responsible for protecting hygiene and the superiority of “the American race” against infectious foreign elements from the borders. The U.S. Army’s experience of medical experiments in colonies and abroad was imported back to the country and formed a crucial part of the attitude and philosophy on public health. Secondly, the growing influence of eugenics and racial pathology at the time reinforced discriminative views on minorities. Progressivism was realized in the form of domestic reform and imperial pursuit at the same time. Major medical journals argued that blacks were inclined to have certain defects, especially sexually transmitted diseases like syphilis, because of their prodigal behavior and lack of hygiene. This kind of racial ideas were shared by the PHS officials who were in charge of the Tuskegee Study. Lastly, the PHS officials believed in continuing the experiment regardless of various social changes. They considered that black participants were not only poor but also ignorant of and even unwilling to undergo the treatment. When the exposure of the experiment led to the Senate

Effects of ionic strength on the coordination of Eu(III) and Cm(III) to a Gram-negative bacterium, Paracoccus denitrificans

International Nuclear Information System (INIS)

Ozaki, T.; Ohnuki, T.; Kimura, T.; Francis, A.J.

2006-01-01

We studied the effect of ionic strength on the interactions of Europium(III) and Curium(III) with a Gram-negative bacterium Paracoccus denitrificans. Bacterial cells grown in 0.5-, 3.5-, and 5.0% NaCl were used in adsorption experiments and laser experiments that were performed at the same ionic strengths as those in the original growth media. The distribution ratio (log K d ) for Eu(III) and Cm(III) was determined at pHs 3-5. To elucidate the coordination environment of Eu(III) adsorbed on P. denitrificans, we estimated the number of water molecules in the inner sphere and strength of the ligand field by time-resolved laser-induced fluorescence spectroscopy (TRLFS) at pHs 4-6. The log K d of Eu(III) and Cm(III) increased with an increase of pH at all ionic strengths because there was less competition for ligands in cells with H + at higher pHs, wherein less H + was present in solution: cation adsorption generally occurs through an exchange with H + on the functional groups of coordination sites. No significant differences were observed in the log K d of Eu(III) and Cm(III) at each pH in 0.5-, 3.5-, and 5.0% NaCl solutions, though competition for ligands with Na + would be expected to increase at higher NaCl concentrations. The log K d of Eu(III) was almost equivalent to that of Cm(III) under all the experimental conditions. TRLFS showed that the coordination environments of Eu(III) did not differ from each other at 0.5-, 3.5-, and 5.0% NaCl at pHs 4-6. TRLFS also showed that the characteristic of the coordination environment of Eu(III) on P. denitrificans was similar to that on a halophile, Nesterenkonia halobia, while it significantly differed from that on a non-halophile, Pseudomonas putida. These findings indicate that the number of coordination sites for Eu(III) on P. denitrificans, whose cell surface may have similar structures to that of halophiles, increased with increasing ionic strength, though their structure remained unchanged. (orig.)

Estimated work ability in warm outdoor environments depends on the chosen heat stress assessment metric

Science.gov (United States)

Bröde, Peter; Fiala, Dusan; Lemke, Bruno; Kjellstrom, Tord

2018-03-01

With a view to occupational effects of climate change, we performed a simulation study on the influence of different heat stress assessment metrics on estimated workability (WA) of labour in warm outdoor environments. Whole-day shifts with varying workloads were simulated using as input meteorological records for the hottest month from four cities with prevailing hot (Dallas, New Delhi) or warm-humid conditions (Managua, Osaka), respectively. In addition, we considered the effects of adaptive strategies like shielding against solar radiation and different work-rest schedules assuming an acclimated person wearing light work clothes (0.6 clo). We assessed WA according to Wet Bulb Globe Temperature (WBGT) by means of an empirical relation of worker performance from field studies (Hothaps), and as allowed work hours using safety threshold limits proposed by the corresponding standards. Using the physiological models Predicted Heat Strain (PHS) and Universal Thermal Climate Index (UTCI)-Fiala, we calculated WA as the percentage of working hours with body core temperature and cumulated sweat loss below standard limits (38 °C and 7.5% of body weight, respectively) recommended by ISO 7933 and below conservative (38 °C; 3%) and liberal (38.2 °C; 7.5%) limits in comparison. ANOVA results showed that the different metrics, workload, time of day and climate type determined the largest part of WA variance. WBGT-based metrics were highly correlated and indicated slightly more constrained WA for moderate workload, but were less restrictive with high workload and for afternoon work hours compared to PHS and UTCI-Fiala. Though PHS showed unrealistic dynamic responses to rest from work compared to UTCI-Fiala, differences in WA assessed by the physiological models largely depended on the applied limit criteria. In conclusion, our study showed that the choice of the heat stress assessment metric impacts notably on the estimated WA. Whereas PHS and UTCI-Fiala can account for

Intermediate-level disinfection with accelerated hydrogen peroxide prevents accumulation of bacteria in Versajet™ tubing during repeated daily debridement using simulated-use testing with an inoculated pork hock.

Science.gov (United States)

Gawaziuk, J P; Alfa, M J; Olson, N; Logsetty, S

2014-05-01

This study assesses the feasibility of using the Versajet™ system (VJS) on an inoculated pork hock (PH) skin surface sequentially for 8 days with daily cleaning and intermediate-level disinfection (ILD). Daily, PHs were inoculated with bacteria suspended in artificial test soil (ATS). An ILD protocol with accelerated hydrogen peroxide (AHP, OxivirTB(®)) was employed to clean and disinfect the VJS between debridements. PH skin contains 6.1-6.8×10(6)cfu/cm(2) bacteria. Bacterial counts in the handpiece and discharge hoses immediately after debridement of the PHs, and before cleaning, increased throughout the study period (5.19-6.43log10cfu/mL). Cleaning with the ILD protocol was reduced bacterial counts on the VJS by 6-log. Protein, a surrogate marker of organic contamination, was also reduced post-cleaning and ILD. Compared to a maximum post-debridement level of protein (57.9 μg/mL) obtained before ILD, VJS protein levels dropped to 9.8 (handpiece) and 13.8 μg/mL (discharge hose). Disinfection of the handpiece and discharge hose after debridement with AHP resulted in a 6-log reduction in bacterial count and 4.2 fold reduction in protein. An ILD protocol with an AHP may be a feasible method for serial skin surface debridements with the VJS for up to eight days. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Solubility behavior and biopharmaceutical classification of novel high-solubility ciprofloxacin and norfloxacin pharmaceutical derivatives.

Science.gov (United States)

Breda, Susana A; Jimenez-Kairuz, Alvaro F; Manzo, Ruben H; Olivera, María E

2009-04-17

The hydrochlorides of the 1:3 aluminum:norfloxacin and aluminum:ciprofloxacin complexes were characterized according to the Biopharmaceutics Classification System (BCS) premises in comparison with their parent compounds. The pH-solubility profiles of the complexes were experimentally determined at 25 and 37 degrees C in the range of pH 1-8 and compared to that of uncomplexed norfloxacin and ciprofloxacin. Both complexes are clearly more soluble than the antibiotics themselves, even at the lowest solubility pHs. The increase in solubility was ascribed to the species controlling solubility, which were analyzed in the solid phases at equilibrium at selected pHs. Additionally, permeability was set as low, based on data reported in the scientific literature regarding oral bioavailability, intestinal and cell cultures permeabilities and also considering the influence of stoichiometric amounts of aluminum. The complexes fulfill the BCS criterion to be classified as class 3 compounds (high solubility/low permeability). Instead, the active pharmaceutical ingredients (APIs) currently used in solid dosage forms, norfloxacin and ciprofloxacin hydrochloride, proved to be BCS class 4 (low solubility/low permeability). The solubility improvement turns the complexes as potential biowaiver candidates from the scientific point of view and may be a good way for developing more dose-efficient formulations. An immediate release tablet showing very rapid dissolution was obtained. Its dissolution profile was compared to that of the commercial ciprofloxacin hydrochloride tablets allowing to dissolution of the complete dose at a critical pH such as 6.8.

Drench application of fish-derived protein hydrolysates affects lettuce growth, chlorophyll content, and gas exchange

Science.gov (United States)

The use of biostimulants to enhance crop production has gained considerable momentum because of its contribution to agroecological sustainability. Protein hydrolysates (PHs) are an important group of plant biostimulants that have received increasing attention in recent years due to their positive ef...

76 FR 27335 - Laboratory Animal Welfare: Proposed Adoption and Implementation of the Eighth Edition of the...

Science.gov (United States)

2011-05-11

... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Institutes of Health Laboratory Animal Welfare...: Office of Laboratory Animal Welfare, Office of Extramural Research, National Institutes of Health, RKL1... Animal Welfare Act and other Federal statutes and regulations relating to animal activities. The PHS...

AFSC/RACE/SAP/Long: Effects of ocean acidification on blue king crab

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This is data from a laboratory experiment in which blue king crab juveniles were held at three different pHs (ambient, pH 7.8, and pH 7.5) for a year. Growth,...

Do dialysis- and transplantation-related medical factors affect perceived health status?

NARCIS (Netherlands)

Rosenberger, J.; van Dijk, J.P.; Nagyova, I.; Roland, R.; Geckova, A.M.; van den Heuvel, W.J.; Groothoff, J.W.

2005-01-01

Background. Quality of life and perceived health status (PHS) are important indicators of patient care together with morbidity, mortality and health-care resource utilization. The aim of this study is to explore how various medical conditions might influence perceived health status. Methods. The

Glyoxylate as a reducing agent for manganese(III) in salen scaffold ...

Indian Academy of Sciences (India)

being the monohydrate gem-diol forms) followed by the slow electron transfer ... stress and implicated as possible therapeutic agents .... excess HGl at different pHs (1.8–2.5) were set aside ...... sion (UGC), New Delhi in terms of a Teacher Fel-.

THE STATE PRESIDENT'S FLAG SINCE 4 SEPTEMBER 1984

African Journals Online (AJOL)

The heraldic description of the flag reads as follows: a rectangular tricolour, ratio three by two, with three triangular fields (top to bottom) in orange, white and blue. The white charged in the hoist with the coat of arms of the Republic of. South Africa. Above the coat of arms the letter. 'SP' are ensigned in gold with black ...

Vehicle Test Facilities at Aberdeen Proving Ground

Science.gov (United States)

1981-07-06

warehouse and rough terrain forklifts. Two 5-ton-capacity manual chain hoists at the rear of the table regulate its slope from 0 to 40 percent. The overall...Capacity at 24-Inch Load Center. 5. TOP/ HTP 2-2-608, Braking, Wheeled Vehicles, 15 Jav.&ry 1971. 6. TOP 2-2-603, Vehicle Fuel Consumption, 1 November 1977. A-1 r -. ’,’

Distribution of petroleum hydrocarbons and organochlorinated contaminants in marine biota and coastal sediments from the ROPME Sea Area during 2005.

Science.gov (United States)

de Mora, Stephen; Tolosa, Imma; Fowler, Scott W; Villeneuve, Jean-Pierre; Cassi, Roberto; Cattini, Chantal

2010-12-01

The composition and spatial distribution of various petroleum hydrocarbons (PHs), comprising both aliphatic and polycyclic aromatic hydrocarbons (PAHs), and selected chlorinated pesticides and PCBs were measured in biota and coastal sediments from seven countries in the Persian Gulf and the Gulf of Oman (Bahrain, Iran, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates). Evidence of extensive marine contamination with respect to organochlorinated compounds and PHs was not observed. Only one site, namely the BAPCO oil refinery in Bahrain, was considered to be chronically contaminated. Comparison of the results from this survey for Σ DDTs and Σ PCBs in rock oysters from the Gulf of Oman with similar measurements made at the same locations over the past two decades indicates a temporal trend of overall decreasing Σ PCB concentrations in oysters, whereas Σ DDTs levels have little changed during that period. Copyright © 2010 Elsevier Ltd. All rights reserved.

Application of the predicted heat strain model in development of localized, threshold-based heat stress management guidelines for the construction industry.

Science.gov (United States)

Rowlinson, Steve; Jia, Yunyan Andrea

2014-04-01

Existing heat stress risk management guidelines recommended by international standards are not practical for the construction industry which needs site supervision staff to make instant managerial decisions to mitigate heat risks. The ability of the predicted heat strain (PHS) model [ISO 7933 (2004). Ergonomics of the thermal environment analytical determination and interpretation of heat stress using calculation of the predicted heat strain. Geneva: International Standard Organisation] to predict maximum allowable exposure time (D lim) has now enabled development of localized, action-triggering and threshold-based guidelines for implementation by lay frontline staff on construction sites. This article presents a protocol for development of two heat stress management tools by applying the PHS model to its full potential. One of the tools is developed to facilitate managerial decisions on an optimized work-rest regimen for paced work. The other tool is developed to enable workers' self-regulation during self-paced work.

Heterodefloculação no sistema Al2O3 - SiC Heterodeflocculation in the Al2O3 - SiC system

Directory of Open Access Journals (Sweden)

I. R. de Oliveira

1998-12-01

Full Text Available Um estudo do comportamento reológico de suspensões aquosas de alumina e carbeto de silício foi desenvolvido, afim de se encontrar condições de processamento que otimizem a dispersão simultânea dessas matérias-primas. Os agentes dispersantes utilizados foram os polieletrólitos: sal de ácido polimetacrílico e polietilenoimina. Os pontos isoelétricos (pie dos pós em suspensão aquosa e seus deslocamentos na presença dos defloculantes utilizados foram determinados. Obteve-se através de medidas de viscosidade e potencial zeta a concentração de defloculante que proporciona melhor dispersão de ambas as suspensões, bem como a influência do pH e da fração volumétrica de sólidos na estabilização. Neste trabalho, verificou-se que a defloculação simultânea de alumina e carbeto de silício pode ser conseguida em pHs nos quais os pós apresentem maior densidade de carga de mesmo sinal na superfície das partículas, preferencialmente utilizando-se o mesmo tipo de dispersante.A study of the rheological behaviour of alumina and of silicon carbide in aqueous suspensions was carried out with the purpose of evaluating processing conditions that enable simultaneous dispersion of both raw materials. The dispersing agents used in this work were polyelectrolytes, including a salt of polymethacrylic acid and polyethyleneimine. The isoelectric points (iep of powders were determined in aqueous suspensions either in the presence or not of deflocculants. The deflocculant concentration that promotes best dispersion, as well as the influence of pH and of solids content on the stabilisation were evaluated through viscosity and zeta potential measurements. It was verified that alumina and silicon carbide can be simultaneously dispersed at pHs where high surface charge of same sign is obtained for both powders, preferably using the same type of dispersant.

Feasibility study and economic analysis of pumped hydro storage and battery storage for a renewable energy powered island

International Nuclear Information System (INIS)

Ma, Tao; Yang, Hongxing; Lu, Lin

2014-01-01

Highlights: • Batteries and pumped hydro storage schemes are examined. • Sizing procedure for each option is investigated in detail. • The two schemes are compared in terms of life cycle cost and technical viability. • Sensitivity analyses are conducted on five key input parameters. - Abstract: This study examined and compared two energy storage technologies, i.e. batteries and pumped hydro storage (PHS), for the renewable energy powered microgrid power supply system on a remote island in Hong Kong. The problems of energy storage for off-grid renewable energy were analyzed. The sizing methods and economic models were developed, and finally applied in the real project (case study). The results provide the most suitable energy storage scheme for local decision-makers. The two storage schemes were further divided into 4 options. Accordingly, the life-cycle costs (LCC), levelized costs for the renewable energy storage system (LCRES) and the LCC ratios between all options were calculated and compared. It was found that the employment of conventional battery (Option 2) had a higher LCC value than the advanced deep cycle battery (Option 1), indicating that using deep cycle batteries is more suitable for a standalone renewable power supply system. The pumped storage combined with battery bank option (Option 3) had only 55% LCC of that of Option 1, making this combined option more cost-competitive than the sole battery option. The economic benefit of pumped storage is even more significant in the case of purely pumped storage with a hydraulic controller (Option 4), with the lowest LCC among all options at 29–48% of Option 1. Sensitivity analysis demonstrates that PHS is even more cost competitive by controlling some adjustments such as increasing energy storage capacity and days of autonomy. Therefore, the renewable energy system coupled with pumped storage presents technically feasible opportunities and practical potential for continuous power supply in remote

pH effect on the enthalpy of dilution and volumetric properties of protocatechuic acid at T = 298.15 K

International Nuclear Information System (INIS)

Zheng, Yan; Liu, Min; Wang, Yong; Wang, Chunmei; Sun, Dezhi; Wang, Bingquan

2014-01-01

Graphical abstract: The dilution thermal power of PCA in potassium phosphate buffer solutions at different pHs and apparent molar volumes were determined in order to investigate the interactions of PCA with the coexistent spicies. - Highlights: • Enthalpies of dilution and apparent molar volumes of PCA in PBS at different pHs were measured. • Enthalpic interaction coefficients, limiting partial molar volumes and experimental slopes of PCA were determined. • The pH dependence of the weak interactions in the investigated system was obtained. • (Solute + solvent) interactions and structure making/breaking ability of solutes in the given system were discussed. - Abstract: The enthalpies of dilution of protocatechuic acid, a natural anti-cancer substance, in sodium phosphate and potassium phosphate buffer solutions with different pH values were measured by using a mixing-flow microcalorimeter at T = 298.15 K. Densities of the pseudo binary system (phosphate buffer + protocatechuic acid) were also measured with a quartz vibrating-tube densimeter. The enthalpic interaction coefficients (h 2 , h 3 and h 4 ) were computed according to the McMillan–Mayer model. Apparent molar volumes of the system were calculated from the data of densities, which have been used to deduce limiting partial molar volumes (V ϕ 0 ) of protocatechuic acid at different pH values. The aim of the experiments and data process is to investigate the interaction between the molecules of the important drug and that of the drug molecule with coexistent species in aqueous solutions as well as the influences on these interactions of such factors as pH and ion strength. Change trends of the enthalpic pair wise interaction coefficient h 2 and V ϕ 0 of protocatechuic acid with pH increasing in the both phosphate buffer solutions were obtained. The thermodynamic properties, h 2 and V ϕ 0 in potassium phosphate buffer solutions were compared with those in sodium phosphate buffer solutions at

Investigating determinants of yawning in the domestic ( Equus caballus) and Przewalski ( Equus ferus przewalskii) horses

Science.gov (United States)

Górecka-Bruzda, Aleksandra; Fureix, Carole; Ouvrard, Anne; Bourjade, Marie; Hausberger, Martine

2016-10-01

Yawning is rare in herbivores which therefore may be an interesting group to disentangle the potential function(s) of yawning behaviour. Horses provide the opportunity to compare not only animals living in different conditions but also wild versus domestic species. Here, we tested three hypotheses by observing both domestic and Przewalski horses living in semi-natural conditions: (i) that domestic horses may show an elevated rate of yawning as a result of the domestication process (or as a result of life conditions), (ii) that individuals experiencing a higher level of social stress would yawn more than individuals with lower social stress and (iii) that males would yawn more often than females. The study involved 19 Przewalski horses (PHs) and 16 domestic horses (DHs) of different breeds living in large outdoor enclosures. The results showed that there was no difference between the PH and DH in yawning frequency (YF). PHs exhibited much higher levels of social interactions than DHs. There was a positive correlation between yawning frequency and aggressive behaviours in PHs, especially males, supporting the idea that yawning may be associated with more excitatory/stressful social situations. A correlation was found between yawning frequency and affiliative behaviours in DHs, which supports the potential relationship between yawning and social context. Finally, the entire males, but not castrated males, showed much higher levels of yawning than females in both species. The intensity (rather than the valence) of the interaction may be important in triggering yawning, which could therefore be a displacement activity that helps reduce tension.

Receiver function images of the central Chugoku region in the Japanese islands using Hi-net data

Science.gov (United States)

Ramesh, D. S.; Wakatsu, H. K.; Watada, S.; Yuan, X.

2005-04-01

Crustal configuration of the central Chugoku region with disposition of the Philippine Sea Plate (PHS) in this area are investigated through the receiver function approach using short-period Hi-net data. Images of the upper mantle discontinuities are also obtained. Restituted short-period receiver functions bring out discernible variations in average composition of the crust and its thickness in the study region. The Vp/ Vs values in the study area are generally high, reaching values in excess of 1.85 at a few places. The central part of the study region showing the highest Vp/ Vs values is coincidentally a subregion of least seismicity, possibly bestowed with special subsurface structure. Migrated receiver function images, both Ps and Pps images, unambiguously trace the NW subducting PHS taking a steeper plunge in the northwest part of the Chugoku region reaching depths of 70 km from its low dip disposition in the southeast. An excellent correlation of the subducting PHS with the hypocenters is also seen. We demonstrate that short-period data after restitution and application of appropriate low pass filters can indeed detect presence of the global 410-km and 660-km discontinuities and map their disposition reasonably well. Our migrated receiver functions image the deflections in the 410-km and 660-km discontinuities in an anti-correlated fashion on expected lines of Clapeyron slope predictions induced by subduction of the Pacific plate (PAC) beneath Japanese islands, though PAC itself is feebly traced but shows good correlation with slab seismicity.

Unique features in the ARIES glovebox line

International Nuclear Information System (INIS)

Martinez, H.E.; Brown, W.G.; Flamm, B.; James, C.A.; Laskie, R.; Nelson, T.O.; Wedman, D.E.

1998-01-01

A series of unique features have been incorporated into the Advanced Recovery and Integrated Extraction System (ARIES) at the Los Alamos National Laboratory, TA-55 Plutonium Facility. The features enhance the material handling in the process of the dismantlement of nuclear weapon primaries in the glovebox line. Incorporated into these features are the various plutonium process module's different ventilation zone requirements that the material handling systems must meet. These features include a conveyor system that consists of a remotely controlled cart that transverses the length of the conveyor glovebox, can be operated from a remote location and can deliver process components to the entrance of any selected module glovebox. Within the modules there exists linear motion material handling systems with lifting hoist, which are controlled via an Allen Bradley control panel or local control panels. To remove the packaged products from the hot process line, the package is processed through an air lock/electrolytic decontamination process that removes the radioactive contamination from the outside of the package container and allows the package to be removed from the process line

Design of YCF-1 mobile γ irradiator

International Nuclear Information System (INIS)

Zhang Hehu; Wang Chuanzhen

1993-01-01

YCF-1 mobile irradiator has been designed by Beijing Institute of Nuclear Engineering of China and has been put into use in Jilin province. It can play an important role in extending irradiation technology in food irradiation, disinfestation, sterilization and quarantine. This paper describes the features and design considerations of a mobile irradiator. The irradiator uses a Cesium-137 source, the design loading capacity of the source is 9.25 PBq (250 kCi). The half-life of Cs-137 is 30.2 years and the source does not need replacing. The dose rate on the surface is 0.0025 mSv/h in accordance with national standards. The shielding of the irradiation room is a steel shell filled with lead. The thickness of lead is 18 cm. The irradiator is installed on a special flat truck. The weight of the irradiator is more than 80 tons. The main components and parts of the irradiator are: source, source racks and hoist, irradiation chamber, storage source chamber, the product's transport system, dose monitoring system, ventilation system and safety interlock system. (author)

A pH dependence study of CdTe quantum dots fluorescence quantum yields using eclipsing thermal lens spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Estupiñán-López, C. [Laboratory of Biomedical Optics and Imaging, Federal University of Pernambuco, Recife, PE (Brazil); Dominguez, C. Tolentino [Laboratory of Biomedical Optics and Imaging, Federal University of Pernambuco, Recife, PE (Brazil); Centre for Telecommunication Studies, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, RJ (Brazil); Filho, P.E. Cabral [Laboratory of Biomedical Optics and Imaging, Federal University of Pernambuco, Recife, PE (Brazil); Biophysics and Radiobiology Department, Federal University of Pernambuco, Recife, PE (Brazil); Santos, B.S. [Laboratory of Biomedical Optics and Imaging, Federal University of Pernambuco, Recife, PE (Brazil); Pharmaceutical Sciences Department, Federal University of Pernambuco, Recife, PE (Brazil); Fontes, A., E-mail: adriana.fontes.biofisica@gmail.com [Laboratory of Biomedical Optics and Imaging, Federal University of Pernambuco, Recife, PE (Brazil); Biophysics and Radiobiology Department, Federal University of Pernambuco, Recife, PE (Brazil); Araujo, R.E. de, E-mail: renato.earaujo@ufpe.br [Laboratory of Biomedical Optics and Imaging, Federal University of Pernambuco, Recife, PE (Brazil)

2016-06-15

In this study we evaluated the absolute fluorescence quantum yield (Φ) of hydrophilic CdTe QDs in function of different pHs, modified from the alkaline to acid, by using two different chemicals compounds, the mercaptosuccinic acid (MSA-the stabilizing agent of the QDs synthesis) or hydrochloric acid (HCl). The pH control of QDs suspensions is essential for the use of fluorescent nanoparticles in biological systems. We used the eclipsing thermal lens spectroscopy technique to determine the absolute fluorescence quantum yield values. The results showed variations on the Φ values as a function of the pH, which allowed a better understanding of QDs emission characteristics, establishing parameters for their use in biomedical applications such as optical images of biological systems, immunoassays, flow cytometry, biosensors and others.

Study on mutagenic and toxic compounds in lake water used as drinking water supply

International Nuclear Information System (INIS)

Monarca, S.; Zanardini, A.

1996-01-01

Trace amounts of mutagenic and toxic substances are frequently found in drinking water, causing a great concern for their potential health effects. Aim of this work is to develop a reliable and efficient screening method for detecting aquatic mutagens and toxins in surface water used for human consumption. For this purpose different methods of concentration of lake water have been experimented by using three different solid phase extraction systems at different pHs and studying the adsorbates by means of a mutagenicity test (Ames test), a toxicity test (LUMIStox) and chemical analysis (GC,MS). This integrated chemical/biological approach showed to be a suitable system for the preliminary choice of an efficient screening method for aquatic mutagens and toxins and to give useful data for the evaluation of potential health hazards

48 CFR 370.400 - Scope of subpart.

Science.gov (United States)

2010-10-01

... SPECIAL PROGRAMS AFFECTING ACQUISITION Acquisitions Involving the Use of Laboratory Animals 370.400 Scope... maintenance, and other activities involving live vertebrate animals conducted under contract (see Public Health Service Policy on Humane Care and Use of Laboratory Animals (PHS Policy), Rev. 1986, Repr. 1996...