Historical texts from the Swahili coast (part 2)

OpenAIRE

Nurse, Derek

2012-01-01

Historical texts from the Swahili coast (Swahili-English): Upper Pokomo Elwana, Mwiini Bajuni Pate Amu, She la Matondoni, Mwani Asili ya Mphokomu Fumo Liongo A story. Proverbs and riddles Mashairi Saidi Haji talking about poetry. Kiteko, a story Verse by MA Abdulkadir, Women`s political songs. An old woman reminisces, Mbaraka Msuri, a hadithi. Ngano A story.

Optical Character Recognition Applied to Romanian Printed Texts of the 18th–20th Century

Directory of Open Access Journals (Sweden)

Svetlana Cojocaru

2016-04-01

Full Text Available The paper discusses Optical Character Recognition (OCR of historical texts of the 18th–20th century in the Romanian language using the Cyrillic script. We differ three epochs (approximately, the 18th, 19th, and 20th centuries, with different usage of the Cyrillic alphabet in Romanian and, correspondingly, different approach to OCR. We developed historical alphabets and sets of glyphs recognition templates specific for each epoch. The dictionaries in proper alphabets and orthographies were also created. In addition, virtual keyboards, fonts, transliteration utilities, etc. were developed. The resulting technology and toolset permit successful recognition of historical Romanian texts in the Cyrillic script. After transliteration to the modern Latin script we obtain no-barrier access to historical documents.

Visual Texts and Historical Thinking: Teachers' Conceptions, Uses, and Reflections

Science.gov (United States)

Nichols, Daniel Jude

2012-01-01

Visual texts, such as photographs, paintings, film, political cartoons, maps, charts, and graphs are important resources used for a variety of purposes in the history classroom. Aligning instructional use of visual texts to key developmental skills within the area of historical thinking should be a central concern to teachers of historical…

Comprehension of texts in Digital Format versus Printed Texts and Self-Regulated Learning in University Students

Directory of Open Access Journals (Sweden)

Paula Gabriela Flores-Carrasco

2016-12-01

Full Text Available This article aims (1 to describe the levels of self-regulation and reading comprehension of scientific expository texts; (2 to establish the relationship between self-regulation and reading comprehension; and (3 to compare the performance in comprehension when the printed media (paper or digital media (computer is used. A quasi-experimental, quantitative, descriptive and correlative design was implemented. The sample was composed of 55 university students from four careers of Education; they were in 1st and 3rd year of study at a regional university of the Council of Rectors of Chilean Universities. Three measuring instruments were used: a questionnaire of self-regulated learning and two comprehension tests based on the understanding of Parodi’s (2005 assessment model. The implementation was made in two consecutive moments; first, the self-questionnaire; then, the tests for reading comprehension in both media. With the data obtained, statistical tests of variance, one-way ANOVA, Pearson’s correlation, and means comparison with Bruner and Munzel and U-Mann Whitney’s tests were calculated. In conclusion, and different from the initial statement, it was obtained that university students have an adequate level of self-regulation and low reading comprehension in both data, even the scores are relatively lower in digital data. In both data the output is inverse to the complexity of the questions. Between 1st and 3rd year, there is no increase either in the self-regulation or in reading comprehension; but, exceptionally, the career of Primary General Education specialist on Language and History did. There is a strong relationship between reading comprehension in printed media and self-regulation (ARATEX. The support does not affect reading comprehension, but individual reading skills of the subjects do. A competent reader will have similar performance in both reading supports.

The Effects of Literacy Support Tools on the Comprehension of Informational e-Books and Print-Based Text

Science.gov (United States)

Herman, Heather A.

2017-01-01

This mixed methods research explores the effects of literacy support tools to support comprehension strategies when reading informational e-books and print-based text with 14 first-grade students. This study focused on the following comprehension strategies: annotating connections, annotating "I wonders," and looking back in the text.…

Learning attention for historical text normalization by learning to pronounce

DEFF Research Database (Denmark)

Bollmann, Marcel; Bingel, Joachim; Søgaard, Anders

2017-01-01

Automated processing of historical texts often relies on pre-normalization to modern word forms. Training encoder-decoder architectures to solve such problems typically requires a lot of training data, which is not available for the named task. We address this problem by using several novel encoder...

Efficiency in Reading Comprehension: A Comparison of Students' Competency in Reading Printed and Digital Texts

Science.gov (United States)

Duran, Erol

2013-01-01

In this study, survey model was used, for investigating the effect of printed and electronic texts on the reading comprehension levels of teacher candidates. While dependent variable of the research comprises the levels of understanding of the teacher candidates, independent variable comprises the departments of the teacher candidates, types of…

Print versus digital texts: understanding the experimental research and challenging the dichotomies

Directory of Open Access Journals (Sweden)

Bella Ross

2017-11-01

Full Text Available This article presents the results of a systematic critical review of interdisciplinary literature concerned with digital text (or e-text uses in education and proposes recommendations for how e-texts can be implemented for impactful learning. A variety of e-texts can be found in the repertoire of educational resources accessible to students, and in the constantly changing terrain of educational technologies, they are rapidly evolving, presenting new opportunities and affordances for student learning. We highlight some of the ways in which academic studies have examined e-texts as part of teaching and learning practices, placing a particular emphasis on aspects of learning such as recall, comprehension, retention of information and feedback. We also review diverse practices associated with uses of e-text tools such as note-taking, annotation, bookmarking, hypertexts and highlighting. We argue that evidence-based studies into e-texts are overwhelmingly structured around reinforcing the existing dichotomy pitting print-based (‘traditional’ texts against e-texts. In this article, we query this approach and instead propose to focus on factors such as students’ level of awareness of their options in accessing learning materials and whether they are instructed and trained in how to take full advantage of the capabilities of e-texts, both of which have been found to affect learning performance.

Print Quality of Ink Jet Printed PVC Foils

Directory of Open Access Journals (Sweden)

Nemanja Kašiković

2015-09-01

Full Text Available Digital printing technique is used for a wide variety of substrates, one of which are PVC foils. Samples used in this research were printed by digital ink jet printing technique using Mimaki JV22 printing machine and J-Eco Subly Nano inks. As printing substrates, two different types of materials were used (ORACAL 640 - Print Vinyl and LG Hausys LP2712. A test card consisting of fields of CMYK colours was created and printed, varying the number of ink layers applied. Samples were exposed to light after the printing process. Spectrophotometric measurements were conducted before and after the light treatment. Based on spectrophotometricaly obtained data, colour differences ΔE2000 were calculated. Results showed that increasing number of layers, as well as the right choice of substrates, can improve the behaviour of printed product during exploitation.

Newspaper archives + text mining = rich sources of historical geo-spatial data

Science.gov (United States)

Yzaguirre, A.; Smit, M.; Warren, R.

2016-04-01

Newspaper archives are rich sources of cultural, social, and historical information. These archives, even when digitized, are typically unstructured and organized by date rather than by subject or location, and require substantial manual effort to analyze. The effort of journalists to be accurate and precise means that there is often rich geo-spatial data embedded in the text, alongside text describing events that editors considered to be of sufficient importance to the region or the world to merit column inches. A regional newspaper can add over 100,000 articles to its database each year, and extracting information from this data for even a single country would pose a substantial Big Data challenge. In this paper, we describe a pilot study on the construction of a database of historical flood events (location(s), date, cause, magnitude) to be used in flood assessment projects, for example to calibrate models, estimate frequency, establish high water marks, or plan for future events in contexts ranging from urban planning to climate change adaptation. We then present a vision for extracting and using the rich geospatial data available in unstructured text archives, and suggest future avenues of research.

Packaging Printing Today

Directory of Open Access Journals (Sweden)

Stanislav Bolanča

2015-12-01

Full Text Available Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid printing process. The possibilities of particular printing techniques for optimal production of the determined packaging were studied in the paper. The problem was viewed from the technological and economical aspect. The possible printing quality and the time necessary for the printing realization were taken as key parameters. An important segment of the production and the way of life is alocation value and it had also found its place in this paper. The events in the field of packaging printing in the whole world were analyzed. The trends of technique developments and the printing technology for packaging printing in near future were also discussed.

Contemporary Multi-Modal Historical Representations and the Teaching of Disciplinary Understandings in History

Science.gov (United States)

Donnelly, Debra J.

2018-01-01

Traditional privileging of the printed text has been considerably eroded by rapid technological advancement and in Australia, as elsewhere, many History teaching programs feature an array of multi-modal historical representations. Research suggests that engagement with the visual and multi-modal constructs has the potential to enrich the pedagogy…

Studies in ephemera text and image in eighteenth-century print

CERN Document Server

Murphy, Kevin

2013-01-01

The book offers new perspectives on works that were central to the visual and literary culture of the Anglo-American world-ephemeral print-but which have received little scholarly attention in the past.

The Asymmetrical Influence of Identity: A Triadic Interaction among Israeli Jews, Israeli Arabs, and Historical Texts

Science.gov (United States)

Kolikant, Yifat Ben-David; Pollack, Sarah

2009-01-01

This study engaged Israeli-Jewish and Israeli-Arab students in a joint investigation of their common past by means of secondary historical sources. The hypothesis was that a triadic interaction among agents of groups with opposing views and historical texts can foster historical thinking. It was expected that while ethnic identity would drive both…

Pirates in Historical Fiction and Nonfiction: A Twin-Text Unit of Study

Science.gov (United States)

Frye, Elizabeth M.; Trathen, Woodrow; Wilson, Kelley

2009-01-01

In this article, the authors outline an interdisciplinary unit of study using quality children's literatures, and they describe several instructional strategies and activities for reading and responding to historical fiction and informational texts. This "piratical study" integrates social studies and the language arts. Several social…

Specification for the U.S. Geological Survey Historical Topographic Map Collection

Science.gov (United States)

Allord, Gregory J.; Walter, Jennifer L.; Fishburn, Kristin A.; Shea, Gale A.

2014-01-01

This document provides the detailed requirements for producing, archiving, and disseminating a comprehensive digital collection of topographic maps for the U.S. Geological Survey (USGS) Historical Topographic Map Collection (HTMC). The HTMC is a digital archive of about 190,000 printed topographic maps published by the USGS from the inception of the topographic mapping program in 1884 until the last paper topographic map using lithographic printing technology was published in 2006. The HTMC provides a comprehensive digital repository of all scales and all editions of USGS printed topographic maps that is easily discovered, browsed, and downloaded by the public at no cost. The HTMC provides ready access to maps that are no longer available for distribution in print. A digital file representing the original paper historical topographic map is produced for each historical map in the HTMC in georeferenced PDF (GeoPDF) format (a portable document format [PDF] with a geospatial extension).

Map Learning with a 3D Printed Interactive Small-Scale Model: Improvement of Space and Text Memorization in Visually Impaired Students

Directory of Open Access Journals (Sweden)

Stéphanie Giraud

2017-06-01

Full Text Available Special education teachers for visually impaired students rely on tools such as raised-line maps (RLMs to teach spatial knowledge. These tools do not fully and adequately meet the needs of the teachers because they are long to produce, expensive, and not versatile enough to provide rapid updating of the content. For instance, the same RLM can barely be used during different lessons. In addition, those maps do not provide any interactivity, which reduces students’ autonomy. With the emergence of 3D printing and low-cost microcontrollers, it is now easy to design affordable interactive small-scale models (SSMs which are adapted to the needs of special education teachers. However, no study has previously been conducted to evaluate non-visual learning using interactive SSMs. In collaboration with a specialized teacher, we designed a SSM and a RLM representing the evolution of the geography and history of a fictitious kingdom. The two conditions were compared in a study with 24 visually impaired students regarding the memorization of the spatial layout and historical contents. The study showed that the interactive SSM improved both space and text memorization as compared to the RLM with braille legend. In conclusion, we argue that affordable home-made interactive small scale models can improve learning for visually impaired students. Interestingly, they are adaptable to any teaching situation including students with specific needs.

Rediscovering Ducos du Hauron's Color Photography through a Review of His Three-Color Printing Processes and Synchrotron Microanalysis of His Prints.

Science.gov (United States)

Cotte, Marine; Fabris, Tiphaine; Langlois, Juliette; Bellot-Gurlet, Ludovic; Ploye, Françoise; Coural, Natalie; Boust, Clotilde; Gandolfo, Jean-Paul; Galifot, Thomas; Susini, Jean

2018-06-18

Louis Ducos du Huron (1837-1920) dedicated his entire life to the elaboration of physical-chemical processes for color photography. This study aimed at highlighting his unique contribution to three-color printing through 1) an in-depth review of the many protocols he published and 2) the synchrotron-based IR and X-ray microanalysis of fragments sampled in three artworks. Ducos du Hauron's method relied on the preparation and assembly of three monochromes (red, blue, yellow). This study brings to light complex multistep recipes based on photochemistry (carbon print), organic, and inorganic chemistry. The various ingredients involved (e.g., pigments, dichromate gelatin, collodion, resin) were identified and localized through their spectroscopic signature, confirming the relevance of synchrotron spectromicroscopy for the characterization of historical photographs. The impressive correlation between texts and chemical analyses calls for a wider application to the history of photography. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

The formative years of relativity the history and meaning of Einstein's Princeton lectures : featuring Einstein's classic text The meaning of relativity in its historical context

CERN Document Server

Gutfreund, Hanoch

2017-01-01

First published in 1922 and based on lectures delivered in May 1921, Albert Einstein's The Meaning of Relativity offered an overview and explanation of the then new and controversial theory of relativity. The work would go on to become a monumental classic, printed in numerous editions and translations worldwide. Now, The Formative Years of Relativity introduces Einstein's masterpiece to new audiences. This beautiful volume contains Einstein's insightful text, accompanied by important historical materials and commentary looking at the origins and development of general relativity. Hanoch Gutfreund and Jurgen Renn provide fresh, original perspectives, placing Einstein's achievements into a broader context for all readers. In this book, Gutfreund and Renn tell the rich story behind the early reception, spread, and consequences of Einstein's ideas during the formative years of general relativity in the late 1910s and 1920s. They show that relativity's meaning changed radically throughout the nascent years of it...

Using Testimonial Response to Frame the Challenges and Possibilities of Risky Historical Texts

Science.gov (United States)

Damico, James; Apol, Laura

2008-01-01

Literature that vividly and explicitly describes (often in the form of testimonies from one or more characters) traumatic and/or catastrophic events of human history poses particular challenges for readers. This article proposes testimonial response as one approach to responding to these "risky historical texts." By way of introducing "testimonial…

Digital printing

Science.gov (United States)

Sobotka, Werner K.

1997-02-01

Digital printing is described as a tool to replace conventional printing machines completely. Still this goal was not reached until now with any of the digital printing technologies to be described in the paper. Productivity and costs are still the main parameters and are not really solved until now. Quality in digital printing is no problem anymore. Definition of digital printing is to transfer digital datas directly on the paper surface. This step can be carried out directly or with the use of an intermediate image carrier. Keywords in digital printing are: computer- to-press; erasable image carrier; image carrier with memory. Digital printing is also the logical development of the new digital area as it is pointed out in Nicholas Negropotes book 'Being Digital' and also the answer to networking and Internet technologies. Creating images text and color in one country and publishing the datas in another country or continent is the main advantage. Printing on demand another big advantage and last but not least personalization the last big advantage. Costs and being able to coop with this new world of prepress technology is the biggest disadvantage. Therefore the very optimistic growth rates for the next few years are really nonexistent. The development of complete new markets is too slow and the replacing of old markets is too small.

Radiosterilization of historical documents: the potential effects of gamma irradiation on paper and printing inks

Energy Technology Data Exchange (ETDEWEB)

Jesus, Anderson G. de, E-mail: jesus.anderson@aman.eb.mil.br [Academia Militar das Agulhas Negras (AMAN/EB), Resende, RJ (Brazil); Brandã, Luis E.B.; Salgado, César M., E-mail: brandao@ien.gov.br, E-mail: otero@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

2017-07-01

The controlled exposition to gamma radiation is a physical process which can be used for the preservation and recovery of historical documents. Depending on the intrinsic characteristics of the material to be treated, it is necessary to research and establish, from time to time, the optimum dose rate and total dose, the conditions to eliminate or reduce the biological threat, the equipment and its logistics, the economic aspects and any other impact caused by radiation on the material to be treated. The references indicate that through research it is possible to consolidate the knowledge about gamma radiation emitted from {sup 60}Co in order to completely remove or at least greatly reduce infestation by insects or biodeterioration microorganisms. On this work we have used a MDS Nordion self-contained {sup 60}Co research irradiator, model Gamacell Excel 220, at Postgraduate Institute of Engineering and Research Alberto Luiz Coimbra, in Rio de Janeiro Federal University. The analysis of the samples submitted to controlled thermal dry aging and to gamma radiation made possible to verify the differences between treated and untreated samples. The results of the chromatic measures indicate that, with the optimum total dose, the gamma radiation treatment does not significantly alter the properties of paper or printing inks. This way, it is possible to conclude that even though the gamma irradiation of historical documents is a complex procedure which demands a detailed study in order to assure its safe application, it is environmentally safer than the use of chemical pesticides. (author)

Radiosterilization of historical documents: the potential effects of gamma irradiation on paper and printing inks

International Nuclear Information System (INIS)

Jesus, Anderson G. de; Brandã, Luis E.B.; Salgado, César M.

2017-01-01

The controlled exposition to gamma radiation is a physical process which can be used for the preservation and recovery of historical documents. Depending on the intrinsic characteristics of the material to be treated, it is necessary to research and establish, from time to time, the optimum dose rate and total dose, the conditions to eliminate or reduce the biological threat, the equipment and its logistics, the economic aspects and any other impact caused by radiation on the material to be treated. The references indicate that through research it is possible to consolidate the knowledge about gamma radiation emitted from 60 Co in order to completely remove or at least greatly reduce infestation by insects or biodeterioration microorganisms. On this work we have used a MDS Nordion self-contained 60 Co research irradiator, model Gamacell Excel 220, at Postgraduate Institute of Engineering and Research Alberto Luiz Coimbra, in Rio de Janeiro Federal University. The analysis of the samples submitted to controlled thermal dry aging and to gamma radiation made possible to verify the differences between treated and untreated samples. The results of the chromatic measures indicate that, with the optimum total dose, the gamma radiation treatment does not significantly alter the properties of paper or printing inks. This way, it is possible to conclude that even though the gamma irradiation of historical documents is a complex procedure which demands a detailed study in order to assure its safe application, it is environmentally safer than the use of chemical pesticides. (author)

Future enhancements to 3D printing and real time production

Science.gov (United States)

Landa, Joseph; Jenkins, Jeffery; Wu, Jerry; Szu, Harold

2014-05-01

The cost and scope of additive printing machines range from several hundred to hundreds of thousands of dollars. For the extra money, one can get improvements in build size, selection of material properties, resolution, and consistency. However, temperature control during build and fusing predicts outcome and protects the IP by large high cost machines. Support material options determine geometries that can be accomplished which drives cost and complexity of printing heads. Historically, 3D printers have been used for design and prototyping efforts. Recent advances and cost reduction sparked new interest in developing printed products and consumables such as NASA who is printing food, printing consumer parts (e.g. cell phone cases, novelty toys), making tools and fixtures in manufacturing, and recursively print a self-similar printer (c.f. makerbot). There is a near term promise of the capability to print on demand products at the home or office... directly from the printer to use.

Resins and Gums in Historical Iatrosophia Texts from Cyprus - A Botanical and Medico-pharmacological Approach.

Science.gov (United States)

Lardos, Andreas; Prieto-Garcia, José; Heinrich, Michael

2011-01-01

This study explores historical iatrosophia texts from Cyprus from a botanical and medico-pharmacological point of view focusing on remedies containing resins and gums. The iatrosophia are a genre of Greek medical literature of Byzantine origin and can be described as medicine handbooks which serve as therapeutic repositories containing recipes or advice. To extract and analyze information on plant usage in such sources - which are largely unedited texts and so far have not been translated - we investigate (i) the relationship of the iatrosophia to Dioscorides' De Materia Medica as well as historic pharmaceutical books or standard texts on modern phytotherapy and (ii) the validity of the remedies by comparing them to modern scientific data on reported biological activities. In the six texts investigated 27 substances incorporating plant exudates are mentioned. They are obtained from over 43 taxa of higher plants and in particular are used to treat dermatological, gastrointestinal, and respiratory tract conditions. The comparison to historic pharmaceutical books and phytotherapy texts reflects the gradual decline of the use of plant exudates in Western medicine. While remarkable parallels to Dioscorides' text exist, the non-Dioscoridean influence suggests a complex pattern of knowledge exchange. Overall, this resulted in an integration of knowledge from so far poorly understood sources. The comparison with bioscientific data reveals a fragmentary picture and highlights the potential of these unexplored substances and their uses. Where relevant bioscientific data are available, we generally found a confirmation. This points to a largely rational use of the associated remedies. Taken together, the iatrosophia are a valuable resource for ethnopharmacological and natural product research. Most importantly they contribute to the understanding of the development of herbal medicines in the (Eastern) Mediterranean and Europe.

Historical Topographic Map Collection bookmark

Science.gov (United States)

Fishburn, Kristin A.; Allord, Gregory J.

2017-06-29

The U.S. Geological Survey (USGS) National Geospatial Program is scanning published USGS 1:250,000-scale and larger topographic maps printed between 1884, the inception of the topographic mapping program, and 2006. The goal of this project, which began publishing the historical scanned maps in 2011, is to provide a digital repository of USGS topographic maps, available to the public at no cost. For more than 125 years, USGS topographic maps have accurately portrayed the complex geography of the Nation. The USGS is the Nation’s largest producer of printed topographic maps, and prior to 2006, USGS topographic maps were created using traditional cartographic methods and printed using a lithographic printing process. As the USGS continues the release of a new generation of topographic maps (US Topo) in electronic form, the topographic map remains an indispensable tool for government, science, industry, land management planning, and leisure.

Printing Has a Future

Directory of Open Access Journals (Sweden)

Hans Georg Wenke

2004-12-01

Full Text Available Printing will also be done in the future. Printed items meet basic needs and are deeply anchored in people’s habits. Being able to handle and collect printed matter is highly attractive. And paper is now more alive than ever. It is therefore too shortsighted to disclaim the importance of one of the still large economic sectors just because of a few looming-recession instigated market shifts.The exciting aspect of drupa 2004 is: printing will be reinvented, so to speak. Much more printing will be done in the future than at present. On the one hand, people are concentrating on process optimization and automation to ensure this. Measuring and testing, process control and optimization, and linking up "office software" with printing technology will be very central topics at drupa 2004. Electronics and print are not rivals; a symbiosis exists. And printing is high-tech: hardly any other multifaceted sector which has been so successful for centuries is as computerized as the printing industry.A series of "new chapters" in the variety of printing possibilities will be opened at drupa. Talk will be generated by further technical developments, often the connection between paper/cardboard and electronics, the link between the office world and graphics industry, text databases and their link-up to graphic page production tools, and "on the fly" dynamic printing over networks.All of this and more belongs to future potentialities, which are so substantial overall, the outlook is by no means black for the "black art". Like its predecessors, drupa 2004 is also a product trade fair. However, more than ever before in its history, it is also an "information village". The exhibits are useful, because they occasionally make what this means visible.

Internet printing

Science.gov (United States)

Rahgozar, M. Armon; Hastings, Tom; McCue, Daniel L.

1997-04-01

The Internet is rapidly changing the traditional means of creation, distribution and retrieval of information. Today, information publishers leverage the capabilities provided by Internet technologies to rapidly communicate information to a much wider audience in unique customized ways. As a result, the volume of published content has been astronomically increasing. This, in addition to the ease of distribution afforded by the Internet has resulted in more and more documents being printed. This paper introduces several axes along which Internet printing may be examined and addresses some of the technological challenges that lay ahead. Some of these axes include: (1) submission--the use of the Internet protocols for selecting printers and submitting documents for print, (2) administration--the management and monitoring of printing engines and other print resources via Web pages, and (3) formats--printing document formats whose spectrum now includes HTML documents with simple text, layout-enhanced documents with Style Sheets, documents that contain audio, graphics and other active objects as well as the existing desktop and PDL formats. The format axis of the Internet Printing becomes even more exciting when one considers that the Web documents are inherently compound and the traversal into the various pieces may uncover various formats. The paper also examines some imaging specific issues that are paramount to Internet Printing. These include formats and structures for representing raster documents and images, compression, fonts rendering and color spaces.

3D Printing A Survey

Directory of Open Access Journals (Sweden)

Muhammad Zulkifl Hasan

2017-08-01

Full Text Available Solid free fabrication SFF are produced to enhance the printing instrument utilizing distinctive strategies like Piezo spout control multi-spout injet printers or STL arrange utilizing cutting information. The procedure is utilized to diminish the cost and enhance the speed of printing. A few techniques take long at last because of extra process like dry the printing. This study will concentrate on SFFS utilizing UV gum for 3D printing.

The analysis of ink jet printed eco-font efficiency

Directory of Open Access Journals (Sweden)

Rastko Milošević

2016-07-01

Full Text Available Utilization of eco-font for office printing is one of sustainable, “green” printing concepts, which besides obvious economic benefits, as a result has a certain effect on environmental sustainability as well. The fundamental problem that this practice faces is decreased quality of text printed using eco-fonts comparing to those printed with regular fonts. The aim of this research is eco-font efficiency estimation, i.e. determination of toner usage reduction level of ink jet printed documents typed with this font type, as well as estimation of the extent humans perceive differences between text printed with eco-font and the one printed by its „non-eco“ equivalent. Combining instrumental measuring method and digital image analysis, it was found that this simple principle (eco-font utilization enables substantial toner usage reduction for an ink jet printing system, while visual test showed that visual experience of text printed using eco-font is sufficient. In addition, awareness of benefits that eco-font utilization brings, change users’ attitude towards eco-font quality.

Some Thoughts on Contemporary Graphic Print

Directory of Open Access Journals (Sweden)

Stefan Skiba

2016-09-01

Full Text Available The production requirements of original graphic works of art have changed since 1980. The development of digital printing using lightfast colors now rivals traditional techniques such as wood cut, screen print, lithography, etching etc. Today, with respect to artistic legitimacy, original graphics using traditional printing techniques compete with original graphics produced by digital printing techniques on the art market. What criteria distinguish traditional printing techniques from those of digital printing in the production and acquisition of original graphics? What consequences is the serious artist faced with when deciding to implement digital print production? How does digital print change original graphic acquisition decisions?

Map Learning with a 3D Printed Interactive Small-Scale Model: Improvement of Space and Text Memorization in Visually Impaired Students.

Science.gov (United States)

Giraud, Stéphanie; Brock, Anke M; Macé, Marc J-M; Jouffrais, Christophe

2017-01-01

Special education teachers for visually impaired students rely on tools such as raised-line maps (RLMs) to teach spatial knowledge. These tools do not fully and adequately meet the needs of the teachers because they are long to produce, expensive, and not versatile enough to provide rapid updating of the content. For instance, the same RLM can barely be used during different lessons. In addition, those maps do not provide any interactivity, which reduces students' autonomy. With the emergence of 3D printing and low-cost microcontrollers, it is now easy to design affordable interactive small-scale models (SSMs) which are adapted to the needs of special education teachers. However, no study has previously been conducted to evaluate non-visual learning using interactive SSMs. In collaboration with a specialized teacher, we designed a SSM and a RLM representing the evolution of the geography and history of a fictitious kingdom. The two conditions were compared in a study with 24 visually impaired students regarding the memorization of the spatial layout and historical contents. The study showed that the interactive SSM improved both space and text memorization as compared to the RLM with braille legend. In conclusion, we argue that affordable home-made interactive small scale models can improve learning for visually impaired students. Interestingly, they are adaptable to any teaching situation including students with specific needs.

Reproduction of Bela Krajina Ornaments on Linen Fabrics by Screen Printing

Directory of Open Access Journals (Sweden)

Tatjana Rijavec

2017-07-01

Full Text Available Decorated Bela Krajina (White Carniolan towels called “otirači” are historical textiles, which represent an important cultural heritage of the Slovenian nation. This article presents the research of the suitability of the screen printing technique for reproducing ornaments from Bela Krajina towels, originally made with a technique called “tkaničenje”. The basic characteristics of woven fabrics, the colours of ornaments from Bela Krajina towels and the linen fabric, suitable for kitchen textiles, were analysed. Two Bela Krajina motifs were chosen for the decoration, namely a diamond and an eight-arm star. A comparison of the the colour diff erences, DE*ab , of the replica ornaments and the ornaments on the original towels made in blue and red colours showed a good match even after washing. It was confi rmed that the screen printing technique is suitable for decorating linen textiles with the original Bela Krajina ornaments, wherein the ornaments retaining their aesthetic and message values.

Using Embedded Visual Coding to Support Contextualization of Historical Texts

Science.gov (United States)

Baron, Christine

2016-01-01

This mixed-method study examines the think-aloud protocols of 48 randomly assigned undergraduate students to understand what effect embedding a visual coding system, based on reliable visual cues for establishing historical time period, would have on novice history students' ability to contextualize historic documents. Results indicate that using…

Every Day a New 3D Printing Material

Science.gov (United States)

Hughes, Bill; Mona, Lynn; Wilson, Greg; Seamans, Jeff; McAninch, Steve; Stout, Heath

2017-01-01

A handful of technological episodes: fire, wheel and axle, Industrial Revolution, Faraday's discovery of electromagnetic induction, the transistor, and the digital age, have historically altered humanity. We are now witnessing/participating in the next transformational technology: 3D printing. Although dating back nearly 30 years, the technology…

Natural products for chronic cough: Text mining the East Asian historical literature for future therapeutics.

Science.gov (United States)

Shergis, Johannah Linda; Wu, Lei; May, Brian H; Zhang, Anthony Lin; Guo, Xinfeng; Lu, Chuanjian; Xue, Charlie Changli

2015-08-01

Chronic cough is a significant health burden. Patients experience variable benefits from over the counter and prescribed products, but there is an unmet need to provide more effective treatments. Natural products have been used to treat cough and some plant compounds such as pseudoephedrine from ephedra and codeine from opium poppy have been developed into drugs. Text mining historical literature may offer new insight for future therapeutic development. We identified natural products used in the East Asian historical literature to treat chronic cough. Evaluation of the historical literature revealed 331 natural products used to treat chronic cough. Products included plants, minerals and animal substances. These natural products were found in 75 different books published between AD 363 and 1911. Of the 331 products, the 10 most frequently and continually used products were examined, taking into consideration findings from contemporary experimental studies. The natural products identified are promising and offer new directions in therapeutic development for treating chronic cough. © The Author(s) 2015.

Scanning and georeferencing historical USGS quadrangles

Science.gov (United States)

Fishburn, Kristin A.; Davis, Larry R.; Allord, Gregory J.

2017-06-23

The U.S. Geological Survey (USGS) National Geospatial Program is scanning published USGS 1:250,000-scale and larger topographic maps printed between 1884, the inception of the topographic mapping program, and 2006. The goal of this project, which began publishing the Historical Topographic Map Collection in 2011, is to provide access to a digital repository of USGS topographic maps that is available to the public at no cost. For more than 125 years, USGS topographic maps have accurately portrayed the complex geography of the Nation. The USGS is the Nation’s largest producer of traditional topographic maps, and, prior to 2006, USGS topographic maps were created using traditional cartographic methods and printed using a lithographic process. The next generation of topographic maps, US Topo, is being released by the USGS in digital form, and newer technologies make it possible to also deliver historical maps in the same electronic format that is more publicly accessible.

Harnessing Biomedical Natural Language Processing Tools to Identify Medicinal Plant Knowledge from Historical Texts.

Science.gov (United States)

Sharma, Vivekanand; Law, Wayne; Balick, Michael J; Sarkar, Indra Neil

2017-01-01

The growing amount of data describing historical medicinal uses of plants from digitization efforts provides the opportunity to develop systematic approaches for identifying potential plant-based therapies. However, the task of cataloguing plant use information from natural language text is a challenging task for ethnobotanists. To date, there have been only limited adoption of informatics approaches used for supporting the identification of ethnobotanical information associated with medicinal uses. This study explored the feasibility of using biomedical terminologies and natural language processing approaches for extracting relevant plant-associated therapeutic use information from historical biodiversity literature collection available from the Biodiversity Heritage Library. The results from this preliminary study suggest that there is potential utility of informatics methods to identify medicinal plant knowledge from digitized resources as well as highlight opportunities for improvement.

Solvents interactions with thermochromic print

Directory of Open Access Journals (Sweden)

Mirela Rožić

2017-12-01

Full Text Available In this study, the interactions between different solvents (benzene, acetone, cyclohexanone, various alcohols and water and thermochromic printing ink were investigated. Thermochromic printing ink was printed on metal surface. Components of thermochromic printing inks are polymeric microcapsules and classic yellow offset printing ink. Below its activation temperature, dye and developer within the microcapsules form a blue coloured complex. Therefore, thermochromic print is green. By heating above the activation temperature, blue colour of the complex turns into the leuco dye colourless state and the green colour of the prints turns into the yellow colour of the classic offset pigment. The results of the interaction with various solvents show that the thermochromic print is stable in all tested solvents except in ethanol, acetone and cyclohexanone. In ethanol, the green colour of the print becomes yellow. SEM analysis shows that microcapsules are dissolved. In acetone and cyclohexanone, the green colour of the print turns into blue, and the microcapsules become significantly more visible. Thus, the yellow pigment interacts with examined ketones. Based on the obtained interactions it can be concluded that the microcapsules have more polar nature than the classical pigment particles. Solvent-thermocromic print interactions were analysed using Hansen solubility parameters that rank the solvents based on their estimated interaction capabilities.

Print Finishing: From Manual to Automated Print Finishing

Directory of Open Access Journals (Sweden)

Gareth Ward

2004-12-01

Full Text Available Meeting the demand for faster turnrounds and shorter print runs goes beyond making the printing press easier to set up and change. There is little point in producing plates and then sheets from a press if the post press area does not change to keep abreast of developments in prepress and the print room. The greatest impact is going to come from JDF, the end to end production data format which is finding wide spread acceptance in print areas. To date finishing equipment manufacturers are not as well represented within the CIP4 organisation as prepress and press vendors, but the major manufacturers are members. All are working to the goal of complete connectivity.The idea of JDF is that if the format of a print product like a magazine is known during the creation phases, the information can be used to preset machinery that is going to be used to produce it, so avoiding input errors and saving manufacturing time.A second aspect to JDF is that information about performance and progress is gathered and can be retrieved from a central point or made available to a customer. Production scheduling and costing becomes more accurate and customer relationships are deepened. However JDF to its fullest extent is not yet in use in connecting the finishing area to the rest of the printing plant. Around the world different companies are testing the idea of JDF to connect saddle stitchers, guillotines and binders with frantic work underway to be able to show results soon.

Print-Based Culture Meets An "Amazoogle" World: New Challenges To A Priesthood of Readers

OpenAIRE

Kellat, Stephen Michael

2007-01-01

Churches of Christ have historically existed deeply rooted in a print-based culture. With the push to a paperless society and the growing disregard among young persons toward print materials, Churches of Christ are faced with a problem. How can such a heritage survive in a digital world when print resources have no known generous benefactor to fund their digitization? How can such a heritage survive in a container that the “next generation” is less likely to approach today? Initial thoughts a...

Balkan Print Forum – Dynamic Balkan Print Media Community

Directory of Open Access Journals (Sweden)

Rossitza Velkova

2011-11-01

Full Text Available Founded in October 2006, the Balkan Print Forum is gradually becoming an important regional institution. Its main targets are to share experiences and know-how,to initiate and intensify contacts and to support joint projects in the Balkan region.Since drupa 2008 there are 11 member countries of the Balkan Print Forum:Albania, Bosnia and Herzegovina, Bulgaria, Croatia, Former Yugoslav Republic of Macedonia, Greece, Hungary, Romania, Serbia, Slovenia and Turkey. Partners of BPF are some companies and universities from Russia and Ukraine.

A Vector Printing Method for High-Speed Electrohydrodynamic (EHD Jet Printing Based on Encoder Position Sensors

Directory of Open Access Journals (Sweden)

Thanh Huy Phung

2018-02-01

Full Text Available Electrohyrodynamic (EHD jet printing has been widely used in the field of direct micro-nano patterning applications, due to its high resolution printing capability. So far, vector line printing using a single nozzle has been widely used for most EHD printing applications. However, the application has been limited to low-speed printing, to avoid non-uniform line width near the end points where line printing starts and ends. At end points of line vector printing, the deposited drop amount is likely to be significantly large compared to the rest of the printed lines, due to unavoidable acceleration and deceleration. In this study, we proposed a method to solve the printing quality problems by producing droplets at an equally spaced distance, irrespective of the printing speed. For this purpose, an encoder processing unit (EPU was developed, so that the jetting trigger could be generated according to user-defined spacing by using encoder position signals, which are used for the positioning control of the two linear stages.

New Technologies and New Paradigms in Historical Research

Directory of Open Access Journals (Sweden)

Antonio Cartelli

2001-01-01

Full Text Available After a short introduction on media evolution and its implication on human history, the paper presents an account of two experiences the authors had while using new technologies in disseminating bibliographical and historical information. The first experience concerns the Web publication of a bibliography on Beneventan manuscripts and arose from the need to overcome the long de-lays in publishing printed information. The Web publication also serves as an online resource for all researchers involved in studies on the South Italian book script in the Middle Ages. The second one relates to recent studies on women copyists in the Middle Ages and uses an online database to disseminate findings on this subject. The paper then analyzes similarities and differences between the two experiences and suggests they can be seen as a source of online information for scholars. Thus, they represent a first step towards the construction of new paradigms of knowledge and research in historical studies.

EARLY ENGLISH PRINTING AND THE HANDS OF COMPOSITORS

Directory of Open Access Journals (Sweden)

Satoko Tokunaga

2005-12-01

Full Text Available This paper examines soine distinctive uses of typefaces by Caxton's compositors in his early products at Westminster and illustrates how useful such examples are in revealing the chronology of actual book production, as well as in identifying the compositors at work on individual volumes. An exhaustive analysis of early printed books can provide us with information about compositors at work in England's earliest printing house. This paper therefore argues that it is inost definitely worth considering such 'inechaiiical' aspects of book design as typography when editing any printed text, and introduces most recent research results contributed by a project at Keio University, which airns to establish a semiautomatic system that can transcribe every feature of the printed text including even minute differences in types.

Digital Dentistry — 3D Printing Applications

Directory of Open Access Journals (Sweden)

Zaharia Cristian

2017-03-01

Full Text Available Three-dimensional (3D printing is an additive manufacturing method in which a 3D item is formed by laying down successive layers of material. 3D printers are machines that produce representations of objects either planned with a CAD program or scanned with a 3D scanner. Printing is a method for replicating text and pictures, typically with ink on paper. We can print different dental pieces using different methods such as selective laser sintering (SLS, stereolithography, fused deposition modeling, and laminated object manufacturing. The materials are certified for printing individual impression trays, orthodontic models, gingiva mask, and different prosthetic objects. The material can reach a flexural strength of more than 80 MPa. 3D printing takes the effectiveness of digital projects to the production phase. Dental laboratories are able to produce crowns, bridges, stone models, and various orthodontic appliances by methods that combine oral scanning, 3D printing, and CAD/CAM design. Modern 3D printing has been used for the development of prototypes for several years, and it has begun to find its use in the world of manufacturing. Digital technology and 3D printing have significantly elevated the rate of success in dental implantology using custom surgical guides and improving the quality and accuracy of dental work.

Historical Slovenian Language Resources

Directory of Open Access Journals (Sweden)

Tomaž Erjavec

2013-09-01

Full Text Available EXTENDED ABSTRACT:The paper presents three language resources enabling better full-text access to digitised printed historical Slovenian texts: a hand-annotated corpus, a hand-annotated lexicon of historical words and a collection of transcribed texts. The aim of the resources is twofold: on one hand they support empirical linguistic research (corpus, collection and represent a reference tool for the research of historical Slovenian (lexicon while on the other hand they may serve as training data for the development of Human Language Technologies enabling better full-text search in digital libraries containing Slovenian written cultural heritage, modernisation of historical texts, and the development of better technological solutions for text recognition and scanning. The hand annotated corpus of historical Slovenian contains the text from 1,000 pages sampled from the years 1750 to 1900, two texts date to the end of the 16th or 17th century. The corpus contains a little more than 250,000 word tokens; each of them being annotated with hand validated linguistic features: modernised form, lemma or base form, and morhpo-syntactic description. Thus the word token »ajfram« is annotated with the normalised form »ajfrom«, by the lemma »ajfer« and morphosyntactic description »Som« or »Samostalnik« (noun, »občni« (common, »moški« (masculine and a modernised form »gorečnost« (fervour. At first the corpus was annotated automatically and then manually verified and corrected. The lexicon was created automatically from the hand-annotated corpus. It contains only attested word-forms and examples of use. The word-forms are ordered under their modern equivalents. All the modern forms of a particular word constitute a dictionary entry, defined by its lemma with conjoint information i.e. the morpho-syntactic description and the closest contemporary synonyms. Thus the entry »ajfrer/Som/gorečnost« is annotated by two modernised words »ajfra �

A New Binarization Algorithm for Historical Documents

Directory of Open Access Journals (Sweden)

Marcos Almeida

2018-01-01

Full Text Available Monochromatic documents claim for much less computer bandwidth for network transmission and storage space than their color or even grayscale equivalent. The binarization of historical documents is far more complex than recent ones as paper aging, color, texture, translucidity, stains, back-to-front interference, kind and color of ink used in handwriting, printing process, digitalization process, etc. are some of the factors that affect binarization. This article presents a new binarization algorithm for historical documents. The new global filter proposed is performed in four steps: filtering the image using a bilateral filter, splitting image into the RGB components, decision-making for each RGB channel based on an adaptive binarization method inspired by Otsu’s method with a choice of the threshold level, and classification of the binarized images to decide which of the RGB components best preserved the document information in the foreground. The quantitative and qualitative assessment made with 23 binarization algorithms in three sets of “real world” documents showed very good results.

A Tale of Two Transcriptions. Machine-Assisted Transcription of Historical Sources

Directory of Open Access Journals (Sweden)

Gunnar Thorvaldsen

2015-01-01

Full Text Available This article explains how two projects implement semi-automated transcription routines: for census sheets in Norway and marriage protocols from Barcelona. The Spanish system was created to transcribe the marriage license books from 1451 to 1905 for the Barcelona area; one of the world’s longest series of preserved vital records. Thus, in the Project “Five Centuries of Marriages” (5CofM at the Autonomous University of Barcelona’s Center for Demographic Studies, the Barcelona Historical Marriage Database has been built. More than 600,000 records were transcribed by 150 transcribers working online. The Norwegian material is cross-sectional as it is the 1891 census, recorded on one sheet per person. This format and the underlining of keywords for several variables made it more feasible to semi-automate data entry than when many persons are listed on the same page. While Optical Character Recognition (OCR for printed text is scientifically mature, computer vision research is now focused on more difficult problems such as handwriting recognition. In the marriage project, document analysis methods have been proposed to automatically recognize the marriage licenses. Fully automatic recognition is still a challenge, but some promising results have been obtained. In Spain, Norway and elsewhere the source material is available as scanned pictures on the Internet, opening up the possibility for further international cooperation concerning automating the transcription of historic source materials. Like what is being done in projects to digitize printed materials, the optimal solution is likely to be a combination of manual transcription and machine-assisted recognition also for hand-written sources.

Variable-data Printing Serves - Niches Here, There & Everywhere

Directory of Open Access Journals (Sweden)

Roger Ynostroza

2004-12-01

Full Text Available A milestone focus on high-end digital color presses capable of variable-data imaging - a technology that was introduced ten years ago and is just now at the beginning of wider, more successful implementation in commercial printing-tends to overshadow some real achievements on other variable-data fronts. Those activities involve ink-jet and electrophotographic imaging for high-volume transactional printing, print-on-demand books and catalogs, wide-format proofing and imaging, label production, and printing of text and coding of printed packaging.The capabilities of digital production color presses intrigue commercial printers the most, especially new units referred to by manufacturers as "Series II" or "third-generation" systems. Besides having more press-like characteristics, from offset-caliber quality, image consistency, and high output rates to sturdy construction, reliability, and stock choice, the units seem to represent a way to produce printing that’s beyond the norm.Some users are producing hybrid printed products (offset printing a quantity of "shells" that are later personalized by digital presses, while others are utilizing clients’ "dynamic" databases to personalize marketing materials that drive response rates up to 15%, even 35%. Finally, digital color systems prompt the creation of high-margin Internet-based print providers offering easy-to-design and easy-toorder print materials. Printers may do well to adopt the high-value communications capability that digital imaging offers.

2nd Historic Mortars Conference

CERN Document Server

Hughes, John; Groot, Caspar; Historic Mortars : Characterisation, Assessment and Repair

2012-01-01

This volume focuses on research and practical issues connected with mortars on historic structures. The book is divided into four sections: Characterisation of Historic Mortars, Repair Mortars and Design Issues, Experimental Research into Properties of Repair Mortars, and Assessment and Testing. The papers present the latest work of researchers in their field. The individual contributions were selected from the contributions to the 2nd Historic Mortars Conference, which took place in Prague, September, 22-24, 2010. All papers were reviewed and improved as necessary before publication. This peer review process by the editors resulted in the 34 individual contributions included in here. One extra paper reviewing and summarising State-of-the-Art knowledge covered by this publication was added as a starting and navigational point for the reader. The editors believe that having these papers in print is important and they hope that it will stimulate further research into historic mortars and related subjects. 

Freeze-drying wet digital prints: An option for salvage?

International Nuclear Information System (INIS)

Juergens, M C; Schempp, N

2010-01-01

On the occasion of the collapse of the Historical Archive of the City of Cologne in March 2009 and the ensuing salvage effort, questions were raised about the use of freeze-drying for soaked digital prints, a technique that has not yet been evaluated for these materials. This study examines the effects of immersion, air-drying, drying in a blotter stack, freezing and freeze-drying on 35 samples of major digital printing processes. The samples were examined visually before, during and after testing; evaluation of the results was qualitative. Results show that some prints were already damaged by immersion alone (e.g. bleeding inks and soluble coatings) to the extent that the subsequent choice of drying method made no significant difference any more. For those samples that did survive immersion, air-drying proved to be crucial for water-sensitive prints, since any contact with the wet surface caused serious damage. Less water-sensitive prints showed no damage throughout the entire procedure, regardless of drying method. Some prints on coated media suffered from minor surface disruption up to total delamination of the surface coating due to the formation of ice crystals during shock-freezing. With few exceptions, freeze-drying did not cause additional damage to any of the prints that hadn't already been damaged by freezing. It became clear that an understanding of the process and materials is important for choosing an appropriate drying method.

The influence of printing substrate on macro non-uniformity and line reproduction quality of imprints printed with electrophotographic process

Directory of Open Access Journals (Sweden)

Đorđe Vujčić

2016-12-01

Full Text Available Print quality is very important for every printing technique. It depends on many different quality attributes. This research included analysis of macro non-uniformities and line reproduction. 16 different paper substrates printed by electrophotographic process were analyzed. They were separated in two groups: coated and uncoated papers. Analysis of macro non-uniformity showed that print mottle has lower values when printed on coated papers than on uncoated papers. Line reproduction analysis showed that the toner spreaded, during melting and fixation, on line edges for both types of paper. According to these results it can be concluded that paper substrate affects the macro non-uniformity and line reproduction, thus overall print quality.

Fabrication of Capacitive Acoustic Resonators Combining 3D Printing and 2D Inkjet Printing Techniques

Directory of Open Access Journals (Sweden)

Rubaiyet Iftekharul Haque

2015-10-01

Full Text Available A capacitive acoustic resonator developed by combining three-dimensional (3D printing and two-dimensional (2D printed electronics technique is described. During this work, a patterned bottom structure with rigid backplate and cavity is fabricated directly by a 3D printing method, and then a direct write inkjet printing technique has been employed to print a silver conductive layer. A novel approach has been used to fabricate a diaphragm for the acoustic sensor as well, where the conductive layer is inkjet-printed on a pre-stressed thin organic film. After assembly, the resulting structure contains an electrically conductive diaphragm positioned at a distance from a fixed bottom electrode separated by a spacer. Measurements confirm that the transducer acts as capacitor. The deflection of the diaphragm in response to the incident acoustic single was observed by a laser Doppler vibrometer and the corresponding change of capacitance has been calculated, which is then compared with the numerical result. Observation confirms that the device performs as a resonator and provides adequate sensitivity and selectivity at its resonance frequency.

Monitoring Biological Damage on Paper-based Documents in the Historical Archive of the Palermo Astronomical Observatory

Directory of Open Access Journals (Sweden)

Marco Di Bella

2017-06-01

Full Text Available Libraries and archives house a wide variety of documents made of materials of vegetal and animal origin: unbound papers and books, manuscripts and printed books, photographs (negative and positive, prints, maps, available to the public for reading needs, study and information. These materials are often subject to fluctuations in environmental and micro-environmental parameters. For this reason, it is essential to implement constant monitoring and control of environmental conditions and potential deteriogens in order to slow down deterioration processes.The monitoring of the microbial degradation of paper documents in the Historical Archives of Palermo Astronomical Observatory has revealed microorganisms (bacteria and fungi that may be considered responsible for damaging the items examined, thus enabling an evaluation of the real risks and the proper methodologies to use to avoid future recolonization.

E-text

DEFF Research Database (Denmark)

Finnemann, Niels Ole

2018-01-01

text can be defined by taking as point of departure the digital format in which everything is represented in the binary alphabet. While the notion of text, in most cases, lends itself to be independent of medium and embodiment, it is also often tacitly assumed that it is, in fact, modeled around...... the print medium, rather than written text or speech. In late 20th century, the notion of text was subject to increasing criticism as in the question raised within literary text theory: is there a text in this class? At the same time, the notion was expanded by including extra linguistic sign modalities...

Influence of printing speed on production of embossing tools using FDM 3D printing technology

Directory of Open Access Journals (Sweden)

Jelena Žarko

2017-06-01

Full Text Available Manufacturing of the embossing tools customary implies use of metals such as zinc, magnesium, copper, and brass. In the case of short run lengths, a conventional manufacturing process and the material itself represent a significant cost, not only in the terms of material costs and the need for using complex technological systems which are necessary for their production, but also in the terms of the production time. Alternatively, 3D printing can be used for manufacturing similar embossing tools with major savings in production time and costs. However, due to properties of materials used in the 3D printing technology, expected results of embossing by 3D printed tools cannot be identical to metal ones. This problem is emphasized in the case of long run lengths and high accuracy requirement for embossed elements. The objective of this paper is primarily focused on investigating the influence of the printing speed on reproduction quality of the embossing tools printed with FDM (Fused Deposition Modelling technology. The obtained results confirmed that printing speed as a process parameter affects the reproduction quality of the embossing tools printed with FDM technology: in the case of deposition rate of 90 mm/s was noted the poorest dimensional accuracy in relation to the 3D model, which is more emphasised in case of circular and square elements. Elements printed with the highest printing speed have a greater dimensional accuracy, but with evident cracks on the surface.

The linguistic construction of the giftedness discourse in the media texts of historical and digital times

Directory of Open Access Journals (Sweden)

Halliki Põlda

2015-04-01

Full Text Available The aim of the study is to describe and explicate, using critical text analysis, how the socially weighty discourse of giftedness has been constructed historically and how it manifests in the media texts of the digital era. The diachronic analysis is based on the media texts of the 1890s–1990s stored in the Corpus of Standard Estonian, while the synchronic analysis applies to texts found in Delfi.ee. The results highlight the main media discourses dealing with giftedness, the relevant terms and expressions, and the social relations and meanings brought up in the media in connection with the topic. The study reveals that through history, the giftedness discourse has been subject to changes and, constructed with specific linguistic means, it plays an important role in modern social arrangements.

ERP system for 3D printing industry

Directory of Open Access Journals (Sweden)

Deaky Bogdan

2017-01-01

Full Text Available GOCREATE is an original cloud-based production management and optimization service which helps 3D printing service providers to use their resources better. The proposed Enterprise Resource Planning system can significantly increase income through improved productivity. With GOCREATE, the 3D printing service providers get a much higher production efficiency at a much lower licensing cost, to increase their competitiveness in the fast growing 3D printing market.

Packaging Printing Today

OpenAIRE

Stanislav Bolanča; Igor Majnarić; Kristijan Golubović

2015-01-01

Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid printing process. T...

Irish Culinary Manuscripts and Printed Books:a Discussion

OpenAIRE

Mac Con Iomaire, Máirtín; Cashman, Dorothy

2011-01-01

This paper provides a discussion of Irish Culinary Manuscripts and Printed Cookbooks. It covers Gaelic hospitality and aristocratic hospitality, setting the background for the Anglo-Irish households from which many manuscripts emerge. It charts the growing sources of information on Irish culinary history. It outlines Barbara Wheaton's framework for reading historic cookbooks and discusses the growing manuscript cookbook collection in the National Library of Ireland.

Typology of historical sources and the reconstruction of long-term historical changes of riverine fish: a case study of the Austrian Danube and northern Russian rivers

Science.gov (United States)

Haidvogl, Gertrud; Lajus, Dmitry; Pont, Didier; Schmid, Martin; Jungwirth, Mathias; Lajus, Julia

2014-01-01

Historical data are widely used in river ecology to define reference conditions or to investigate the evolution of aquatic systems. Most studies rely on printed documents from the 19th century, thus missing pre-industrial states and human impacts. This article discusses historical sources that can be used to reconstruct the development of riverine fish communities from the Late Middle Ages until the mid-20th century. Based on the studies of the Austrian Danube and northern Russian rivers, we propose a classification scheme of printed and archival sources and describe their fish ecological contents. Five types of sources were identified using the origin of sources as the first criterion: (i) early scientific surveys, (ii) fishery sources, (iii) fish trading sources, (iv) fish consumption sources and (v) cultural representations of fish. Except for early scientific surveys, all these sources were produced within economic and administrative contexts. They did not aim to report about historical fish communities, but do contain information about commercial fish and their exploitation. All historical data need further analysis for a fish ecological interpretation. Three case studies from the investigated Austrian and Russian rivers demonstrate the use of different source types and underline the necessity for a combination of different sources and a methodology combining different disciplinary approaches. Using a large variety of historical sources to reconstruct the development of past fish ecological conditions can support future river management by going beyond the usual approach of static historical reference conditions. PMID:25284959

Review of Recent Inkjet-Printed Capacitive Tactile Sensors

Directory of Open Access Journals (Sweden)

Ahmed Salim

2017-11-01

Full Text Available Inkjet printing is an advanced printing technology that has been used to develop conducting layers, interconnects and other features on a variety of substrates. It is an additive manufacturing process that offers cost-effective, lightweight designs and simplifies the fabrication process with little effort. There is hardly sufficient research on tactile sensors and inkjet printing. Advancements in materials science and inkjet printing greatly facilitate the realization of sophisticated tactile sensors. Starting from the concept of capacitive sensing, a brief comparison of printing techniques, the essential requirements of inkjet-printing and the attractive features of state-of-the art inkjet-printed tactile sensors developed on diverse substrates (paper, polymer, glass and textile are presented in this comprehensive review. Recent trends in inkjet-printed wearable/flexible and foldable tactile sensors are evaluated, paving the way for future research.

The Impact of Multimodal Texts on Reading Achievement: A Study of Iranian Secondary School Learners

Directory of Open Access Journals (Sweden)

Bahareh Baharani

2015-07-01

Full Text Available This study was designed to investigate the impact of multimodal text on reading comprehension test performance of Iranian intermediate learners. A total of 80 students participated in this study. All of them were Iranian female EFL learners with the age ranging from 16 to 18. They were selected from a boarding high school in Nasr Abad, Torbat Jam in Khorasan e Razavi, Iran. The students were randomly settled in four groups, who received different instructional approaches through using linear texts, multimodal printed texts, non-printed multimodal texts, and both multimodal printed and non-printed texts.  A pre-test and post-test were used to find out the differences before and after the experimental treatment.  The results reflected that the printed and non-printed multimodal texts had significant impact on reading comprehension test performance. In contrast, applying linear texts or traditional texts did not exert significant influence on reading comprehension ability of the participants. The findings provide useful hints for language instructors to improve effectiveness of instructional reading curriculums and reading ability of language learners. The participants who learned reading comprehension through using multimodal printed and non-printed texts enjoy reading programs and develop their intrinsic and extrinsic motivation for improving reading ability.

Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials

Directory of Open Access Journals (Sweden)

Amelia Yilin Lee

2017-10-01

Full Text Available The rapid development of additive manufacturing and advances in shape memory materials have fueled the progress of four-dimensional (4D printing. With the right external stimulus, the need for human interaction, sensors, and batteries will be eliminated, and by using additive manufacturing, more complex devices and parts can be produced. With the current understanding of shape memory mechanisms and with improved design for additive manufacturing, reversibility in 4D printing has recently been proven to be feasible. Conventional one-way 4D printing requires human interaction in the programming (or shape-setting phase, but reversible 4D printing, or two-way 4D printing, will fully eliminate the need for human interference, as the programming stage is replaced with another stimulus. This allows reversible 4D printed parts to be fully dependent on external stimuli; parts can also be potentially reused after every recovery, or even used in continuous cycles—an aspect that carries industrial appeal. This paper presents a review on the mechanisms of shape memory materials that have led to 4D printing, current findings regarding 4D printing in alloys and polymers, and their respective limitations. The reversibility of shape memory materials and their feasibility to be fabricated using three-dimensional (3D printing are summarized and critically analyzed. For reversible 4D printing, the methods of 3D printing, mechanisms used for actuation, and strategies to achieve reversibility are also highlighted. Finally, prospective future research directions in reversible 4D printing are suggested.

Concept of heat-induced inkless eco-printing.

Science.gov (United States)

Chen, Jinxiang; Wang, Yong; Xie, Juan; Meng, Chuang; Wu, Gang; Zu, Qiao

2012-07-01

Existing laser and inkjet printers often produce adverse effects on human health, the recycling of printing paper and the environment. Therefore, this paper examines the thermogravimetry curves for printer paper, analyzes the discoloration of paper using heat-induction, and investigates the relationship between paper discoloration and the heat-inducing temperature. The mechanism of heat-induced printing is analyzed initially, and its feasibility is determined by a comparative analysis of heat-induced (laser ablation) printing and commercial printing. The innovative concept of heat-induced inkless eco-printing is proposed, in which the required text or graphics are formed on the printing paper via yellowing and blackening produced by thermal energy. This process does not require ink during the printing process; thus, it completely eliminates the aforementioned health and environmental issues. This research also contributes to related interdisciplinary research in biology, laser technology, photochemistry, nano-science, paper manufacturing and color science. Copyright © 2012 Elsevier Ltd. All rights reserved.

A research on comprehension differences between print and screen reading

Directory of Open Access Journals (Sweden)

Szu-Yuan Sun

2013-12-01

Full Text Available Since the 1980s, extensive research has been conducted comparing reading comprehension from printed text and computer screens. The conclusions, however, are not very consistent. As reading from computer screens requires a certain degree of individual technical skill, such variables should be objectively taken into consideration when conducting an experiment regarding the comparison between print and screen reading. This study analyses the difference in the level of understanding of the two presentational formats (text on printed pages and hypertext on computer screens for people between 45-54 years of age (i.e. “middleaged” adults. In our experimental findings there were no significant differences between the levels of comprehension for print and screen presentations. With regard to individual differences in gender, age group and educational level, the findings are as follows: gender and education effects on print reading comprehension performance were significant, while those on screen reading comprehension performance were not. For middle-aged computer learners, the main effect of age group on both print and screen reading comprehension performance was insignificant. In contrast, linear texts of traditional paper-based material are better for middle-aged readers’ literal text comprehension, while hypertext is beneficial to their inferential text comprehension. It is also suggested that hypermedia could be used as a cognitive tool for improving middle-aged adults’ inferential abilities on reading comprehension, provided that they were trained adequately to use available computers.

Written culture: reading pratices and printed book

Directory of Open Access Journals (Sweden)

Lidia Eugenia Cavalcante

2009-07-01

Full Text Available The history of the written culture and the reading practices is the subject argued in this article. It aims at to understand the trajectory of the printed book in its materiality, as well as the processes delineated from the undisputed cultural presence and politics of this support for the modern society. Search to evidence the reading practices, the phenomena and the mutations that fortify such support per centuries, approaching the “book crisis”, its causes and effects. Therefore, it deals with the particularitities of the written culture, that if they had accomplished in the Siècle des Lumières and if they had consecrated in “acting” of the spirit of the authors and the readers of that time, whose propagation influenced the western person. It analyzes the sociological and historical conditions of the place of the modern reader between Science, Philosophy and Romance, continuously transformed for the renewal of the thought and the culture.

Print quality challenges for the next decade

Science.gov (United States)

Meyer, John D.

1990-07-01

The decade of the eighties has seen a remarkable transformation in the performance and capabilities of shared and personal printers. Dramatic gains have been made in four key areas: cost, throughput, reliability and most significantly, print quality. The improvements in text print quality due to algorithmic fonts and increased resolution have been pivotal in the creation of the desktop publishing market. Electronic pre-press systems now include hardware to receive Postscript files accompanied by color originals for scanning and separation. These systems have application in the commercial printing of a wide variety of material e.g. books, magazines, brochures, newspapers. The vision of the future of hardcopy now embraces the full spectrum from typeset text to full color reproduction of natural images due to the advent of grayscale and color capability in printer technology. This will place increased demands for improvements in print quality, particularly in the use of grayscale and color. This paper gives an overview of the challenges which must be met and discusses data communication standards and print quality measurement techniques as a means of meeting these challenges for both color and black and white output.

Preservation of Chinese Print Astronomical Literature in the Digital and Network Age

Science.gov (United States)

Zhang, J.; Shi, W.

2015-04-01

Over the last few decades, more and more journals and books have been published in both electronic and print formats. Some journals have been digitized retrospectively going back to the first volume of more than a hundred years ago, which benefits researchers and librarians tremendously. As a result, many librarians subscribe to books and journals in both electronic and print versions when possible. In many cases, because of budget shortfalls and the low usage of print materials, many libraries have started to order electronic only. This trend heralds a potential demise of print literature as major library resources and has implications for the library services associated with them. This paper proposes some opinions on this issue. We believe that the librarians should pay attention to and conserve the published astronomical literature, a precious historical and cultural heritage, so that we could hand it down to future generations, just like our predecessors did for us.

Special Issue: 3D Printing for Biomedical Engineering

Directory of Open Access Journals (Sweden)

Chee Kai Chua

2017-02-01

Full Text Available Three-dimensional (3D printing has a long history of applications in biomedical engineering. The development and expansion of traditional biomedical applications are being advanced and enriched by new printing technologies. New biomedical applications such as bioprinting are highly attractive and trendy. This Special Issue aims to provide readers with a glimpse of the recent profile of 3D printing in biomedical research.

Influence of Parameters of a Printing Plate on Photoluminescence of Nanophotonic Printed Elements of Novel Packaging

Directory of Open Access Journals (Sweden)

Olha Sarapulova

2015-01-01

Full Text Available In order to produce nanophotonic elements for smart packaging, we investigated the influence of the parameters of screen and offset gravure printing plates on features of printed application of coatings with nanophotonic components and on parameters of their photoluminescence. To determine the dependence of luminescence intensity on the thickness of solid coating, we carried out the formation of nanophotonic solid surfaces by means of screen printing with different layer thickness on polypropylene film. The obtained analytical dependencies were used to confirm the explanation of the processes that occur during the fabrication of nanophotonic coverings with offset gravure printing plates. As a result of experimental studies, it was determined that the different character of the dependency of total luminescence intensity of nanophotonic elements from the percentage of a pad is explained by the use of different types of offset gravure printing plates, where the size of raster points remains constant in one case and changes in the other case, while the depth of the printing elements accordingly changes or remains constant. To obtain nanophotonic areas with predetermined photoluminescent properties, the influence of investigated factors on changes of photoluminescent properties of nanophotonic printed surfaces should be taken into consideration.

Low-cost near-infrared imaging device for inspection of historical manuscripts

International Nuclear Information System (INIS)

Mohd Ashhar Khalid

2004-01-01

Near-infrared (NIR) or sometimes called black light is a waveform beyond visible light and it is not detectable by human eyes. However electronic sensors such as the type used in digital cameras are able to detect signals in the infrared band. To avoid distortion in the pictures obtained near-infrared is blocked by optical filters inserted in digital cameras. By carrying out minor modification allowing near-infrared signal to be imaged while blocking the visible signal, the camera is turned into a low-cost NIR imaging instrument. NIR imaging can be a useful tool in historical manuscript study or restoration. A few applications have been successfully demonstrated in laboratory experiment using the instrument available in MINT. However, due to unavailability of historical items, easily available texts and paintings are used in the demonstrations. This paper reports achievements of early work on the application of digital camera in the detection of damaged prints or writings. (Author)

Digital Dentistry — 3D Printing Applications

OpenAIRE

Zaharia Cristian; Gabor Alin-Gabriel; Gavrilovici Andrei; Stan Adrian Tudor; Idorasi Laura; Sinescu Cosmin; Negruțiu Meda-Lavinia

2017-01-01

Three-dimensional (3D) printing is an additive manufacturing method in which a 3D item is formed by laying down successive layers of material. 3D printers are machines that produce representations of objects either planned with a CAD program or scanned with a 3D scanner. Printing is a method for replicating text and pictures, typically with ink on paper. We can print different dental pieces using different methods such as selective laser sintering (SLS), stereolithography, fused deposition mo...

Colored inks analysis and differentiation: A first step in artistic contemporary prints discrimination

International Nuclear Information System (INIS)

Vila, Anna; Ferrer, Nuria; Garcia, Jose F.

2007-01-01

Prints are the most popular artistic technique. Due to their manufacturing procedure, they are also one of the most frequently falsified types of artwork. In terms of their economic and historic value, the chemical analysis and characterisation of coloured inks and their principal constituent materials (pigments), together with the historical and aesthetic information available in the Catalogues Raisonees, are important tools in distinguishing originals from non-original prints. The chemical characterisation and discrimination of coloured inks has test in this study. Analysis using Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and X-ray diffraction (XRD) has been done on blue pigments and inks, due to this colour is one of the most representative for the presence of organic and inorganic materials in their composition. Conclusion obtained for this colour would demonstrate the capability of the approach when it is applied to any other coloured set of inks

Colored inks analysis and differentiation: A first step in artistic contemporary prints discrimination

Energy Technology Data Exchange (ETDEWEB)

Vila, Anna [Department de Pintura, Conservacio-Restauracio, Facultat de Belles Arts, Universitat de Barcelona, C/Pau Gargallo 4, 08028 Barcelona (Spain)]. E-mail: avila@sct.ub.es; Ferrer, Nuria [Serveis Cientificotecnics, Universitat de Barcelona, C/Lluis Sole i Sabaris 1, 08028 Barcelona (Spain)]. E-mail: nferrer@sctub.es; Garcia, Jose F. [Department de Pintura, Conservacio-Restauracio, Facultat de Belles Arts, Universitat de Barcelona, C/Pau Gargallo 4, 08028 Barcelona (Spain)]. E-mail: ifgarcia@ub.edu

2007-04-04

Prints are the most popular artistic technique. Due to their manufacturing procedure, they are also one of the most frequently falsified types of artwork. In terms of their economic and historic value, the chemical analysis and characterisation of coloured inks and their principal constituent materials (pigments), together with the historical and aesthetic information available in the Catalogues Raisonees, are important tools in distinguishing originals from non-original prints. The chemical characterisation and discrimination of coloured inks has test in this study. Analysis using Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and X-ray diffraction (XRD) has been done on blue pigments and inks, due to this colour is one of the most representative for the presence of organic and inorganic materials in their composition. Conclusion obtained for this colour would demonstrate the capability of the approach when it is applied to any other coloured set of inks.

Inkjet-printed silver tracks on different paper substrates

CSIR Research Space (South Africa)

Joubert, T-H

2015-08-01

Full Text Available Inkjet printing is a widely used patterning method in industrial and scientific applications, and has also drawn attention in the field of printed electronics in recent years [1]. In this work, conductive silver tracks were achieved by inkjet...

Numerical simulation of evaporation and absorption of inkjet printed droplets

NARCIS (Netherlands)

Siregar, D.P.

2012-01-01

Inkjet printing is an important field of research for many industrial applications. In particular, the inkjet-printing technology is widely used in the production of a text or graphics of documents stored in electronic form by printing ink on papers and the manufacturing of microarray slides by

A historical overview of advertising in Serbia

Directory of Open Access Journals (Sweden)

Ognjanov Galjina

2016-01-01

Full Text Available Growing number of advertising agencies, substantial increase of advertising budgets of both local and international companies in Serbia and proliferation of advertising messages targeting Serbian consumers in recent years have contributed to a belief that advertising in Serbia has been a brand new phenomenon brought in during its transition to a market economy. The truth however is quite different. Therefore, the paper aims to show and discuss historical evidence confirming that advertising practice in Serbia is more than two centuries old. In this paper, the history of advertising in Serbia is followed since 1791, when the first print advertisement offering calendar to families and farmers in Serbia appeared in a newspaper. Four periods of advertising development have been described: 1 early beginnings, 2 interwar period, 3 socialist advertising and 4 advertising in transition.

Text accessibility by people with reduced contrast sensitivity.

Science.gov (United States)

Crossland, Michael D; Rubin, Gary S

2012-09-01

Contrast sensitivity is reduced in people with eye disease, and also in older adults without eye disease. In this article, we compare contrast of text presented in print and digital formats with contrast sensitivity values for a large cohort of subjects in a population-based study of older adults (the Salisbury Eye Evaluation). Contrast sensitivity values were recorded for 2520 adults aged 65 to 84 years living in Salisbury, Maryland. The proportion of the sample likely to be unable to read text of different formats (electronic books, newsprint, paperback books, laser print, and LED computer monitors) was calculated using published contrast reserve levels required to perform spot reading, to read with fluency, high fluency, and under optimal conditions. One percent of this sample had contrast sensitivity less than that required to read newsprint fluently. Text presented on an LED computer monitor had the highest contrast. Ninety-eight percent of the sample had contrast sensitivity sufficient for high fluent reading of text (at least 160 words/min) on a monitor. However, 29.6% were still unlikely to be able to read this text with optimal fluency. Reduced contrast of print limits text accessibility for many people in the developed world. Presenting text in a high-contrast format, such as black laser print on a white page, would increase the number of people able to access such information. Additionally, making text available in a format that can be presented on an LED computer monitor will increase access to written documents.

Study of lip prints: A forensic study

Directory of Open Access Journals (Sweden)

Vikash Ranjan

2014-01-01

Full Text Available Background: Although several studies have been done on lip prints for human identification in forensic science, there is a doubt about their use in gender determination. Aims: The present study was designed to study the lip groove patterns in all the quadrants of both male and female subjects to identify the sex, based on the patterns of the grooves of the lip prints. Study Design: 300 lip prints were collected from volunteers of D. J. College of Dental Sciences and Research, Modinagar (UP. Materials and Methods: Lip prints were recorded with lip stick and transferred on to a glass slide. Statistical Analysis: Pearson chi-square test was adopted for statistical analysis and probability value (P value was calculated. Conclusion: In our study, none of the lip prints were identical, thus confirming the role of lip prints in individual identification. According to Suzuki′s classification, Type I, II, III and IV patterns were significant in gender determination.

Where are the Search Engines for Handwritten Documents?

NARCIS (Netherlands)

van der Zant, Tijn; Schomaker, Lambert; Zinger, Svitlana; van Schie, Henny

Although the problems of optical character recognition for contemporary printed text have been resolved, for historical printed and handwritten connected cursive text (i.e. western style writing), they have not. This does not mean that scanning historical documents is not useful. This article

Where are the search engines for handwritten documents?

NARCIS (Netherlands)

Zant, T.; Schomaker, L.; Zinger, S.; Schie, H.

2009-01-01

Although the problems of optical character recognition for contemporary printed text have been resolved, for historical printed and handwritten connected cursive text (i.e. western style writing), they have not. This does not mean that scanning historical documents is not useful. This article

Continuity and change in medicinal plant use: the example of monasteries on Cyprus and historical iatrosophia texts.

Science.gov (United States)

Lardos, Andreas; Heinrich, Michael

2013-10-28

How medicinal plant knowledge changes over time is a question of central importance in modern ethnopharmacological research. However, only few studies are available which undertook a comprehensive exploration of the evolution of plant use in human cultures. In order to understand this dynamic process, we conduct a systematic diachronic investigation to explore continuity and change in two knowledge systems which are closely related but separated in time-historical iatrosophia texts and today's Greek Orthodox monasteries on Cyprus. An ethnobotanical study was conducted in 21 of the island's monasteries involving various types of interview as well as a written questionnaire survey. Data about medicinal plant use collected in the monasteries was analysed and quantitatively compared to historical iatrosophia texts using data from our pre-existing dataset. We found a core group of plant taxa for which a high consensus exists among the monasteries regarding their medicinal usefulness. Various means and routes of knowledge transmission appear to be involved in the development of this knowledge. The systematic comparison between the monasteries and the iatrosophia shows similarities and differences on various levels. While the plants used by the nuns and monks have by the majority a relationship to the iatrosophia and show a remarkable historical consistency in terms of their use for defined groups of ailments, the importance of many of these plants and the use of herbal medicines in general have changed. This is one of the first studies from the Mediterranean region which is based on a systematic ethnopharmacological analysis involving comprehensive datasets of historical and modern ethnographic data. The example illustrates continuity and change in 'traditional' knowledge as well as the adoption of new knowledge and provides the opportunity to look beyond the dichotomy between traditional and modern concepts of plant usage. Overall, the study suggests that a systematic

How do typographical factors affect reading text and comprehension performance in Arabic?

Science.gov (United States)

Ganayim, Deia; Ibrahim, Raphiq

2013-04-01

The objective of this study was to establish basic reading performance that could lead to useful design recommendations for print display text formats and layouts for the improvement of reading and comprehension performance of print text, such as academic writings, books, and newspapers, of Arabic language. Readability of English print text has been shown to be influenced by a number of typographical variables, including interline spacing, column setting and line length, and so on.Therefore, it is very important to improve the reading efficiency and satisfaction of print text reading and comprehension by following simple design guidelines. Most existing research on readability of print text is oriented to build guidelines for designing English texts rather than Arabic. However, guidelines built for English script cannot be simply applied for Arabic script because of orthographic differences. In the current study, manipulating interline spacing and column setting and line length generated nine text layouts. The reading and comprehension performance of 210 native Arab students assigned randomly to the different text layouts was compared. Results showed that the use of multicolumn setting (with medium or short line length) affected comprehension achievement but not reading and comprehension speed. Participants' comprehension scores were better for the single-column (with long line length) than for the multicolumn setting. However, no effect was found for interline spacing. The recommendations for appropriate print text format and layout in Arabic language based on the results of objective measures facilitating reading and comprehension performance is a single-column (with long line length) layout with no relevance of the interline spacing.

Health Sciences Patrons Use Electronic Books More than Print Books

Directory of Open Access Journals (Sweden)

Robin Elizabeth Miller

2017-09-01

Full Text Available A Review of: Li, J. (2016. Is it cost-effective to purchase print books when the equivalent e-book is available? Journal of Hospital Librarianship, 16(1, 40-48. http://dx.doi.org/10.1080/15323269.2016.1118288 Abstract Objective – To compare use of books held simultaneously in print and electronic formats. Design – Case study. Setting – A health sciences library at a public comprehensive university with a medical college in the southern United States. Subjects – Usage data for 60 books held by the library simultaneously in print and electronically. The titles were on standing order in print and considered “core” texts for clinical, instructional, or reference for health sciences faculty, students, and medical residents. Methods – Researchers collected usage data for 60 print titles from the integrated library system and compared the data to COUNTER reports for electronic versions of the same titles, for the period spanning 2010-2014. Main Results – Overall, the 60 e-book titles were used more than the print versions, with the electronic versions used a total of 370,695 times while the print versions were used 93 times during the time period being examined. Conclusion – The use of electronic books outnumbers the use of print books of the same title.

3D-Printed Biopolymers for Tissue Engineering Application

Directory of Open Access Journals (Sweden)

Xiaoming Li

2014-01-01

Full Text Available 3D printing technology has recently gained substantial interest for potential applications in tissue engineering due to the ability of making a three-dimensional object of virtually any shape from a digital model. 3D-printed biopolymers, which combine the 3D printing technology and biopolymers, have shown great potential in tissue engineering applications and are receiving significant attention, which has resulted in the development of numerous research programs regarding the material systems which are available for 3D printing. This review focuses on recent advances in the development of biopolymer materials, including natural biopolymer-based materials and synthetic biopolymer-based materials prepared using 3D printing technology, and some future challenges and applications of this technology are discussed.

Photooxidation stability of microcapsules in thermochromic prints

Directory of Open Access Journals (Sweden)

Mirela Rozic

2018-03-01

Full Text Available In this paper, photochemical stability of two thermochromic prints was investigated: vegetable oil based offset and UV curing screen printing ink. The obtained preliminary results can be used for further detailed examination of prints stability. It is well known that thermochromic printing inks are very unstabile when exsposed to UV irradiance and this is why they are mainly used for applications that are not directly exposed to sunlight. The results of the study show the heterogeneous nature of photooxidative degradation of thermochromic prints, and the opposite behaviour of photooxidation can be noticed comparing examined prints. Microcapsules in the UV curable screen print by fixation with polar polymer binder can create a new products stable to photoxidation. For this reason, the areas where the microcapsules and binder are bonded together are stable. Degraded only areas where binder is not related to microcapsules. Microcapsules in offset print do not have the ability to create new stabile forms due to smaller polarity and different chemical composition of the offset oxidized binder. In the offset print, the microcapsules are the least photooxidative stable and also cause lower photooxidative stability of the binder in contact with them. Cavities are formed in the areas where microcapsules are in contact with the binder, while the areas in which the binder is not in contact with microcapsules are not degraded.

Vocational Literacy in Mozambique: Historical Development, Current Challenges and Contradictions

Directory of Open Access Journals (Sweden)

Oleg Popov

2016-03-01

Full Text Available The study analyses the historical development of vocational literacy in basic education and Non-Formal Vocational Education (NFVE in Mozambique, as well as current challenges and contradictions. The theoretical lens of Cultural-Historical Activity Theory (CHAT is employed in the study. Methodologically the study was executed through an analysis of oral, printed and e-resources produced by the main stakeholders and also the reflective experiences of the authors in their extensive educational work in the country. The findings reveal poorly developed vocational literacy education in schools and non-formal settings in spite of recurrent political declarations about its importance. There is a strong dependence by formal and particularly NFVE sectors on the technical and financial support provided by international organisations. Vocational literacy courses are characterized by a lack of adequate equipment and poor practice. As a consequence, theoretical or elementary forms of vocational knowledge are dominant in the courses, resulting in the dissatisfaction of both learners and educators. Vocational literacy development proved to be a complex field that faces many challenges and ischaracterised by diverse internal contradictions.

3D Printed Multimaterial Microfluidic Valve.

Directory of Open Access Journals (Sweden)

Steven J Keating

Full Text Available We present a novel 3D printed multimaterial microfluidic proportional valve. The microfluidic valve is a fundamental primitive that enables the development of programmable, automated devices for controlling fluids in a precise manner. We discuss valve characterization results, as well as exploratory design variations in channel width, membrane thickness, and membrane stiffness. Compared to previous single material 3D printed valves that are stiff, these printed valves constrain fluidic deformation spatially, through combinations of stiff and flexible materials, to enable intricate geometries in an actuated, functionally graded device. Research presented marks a shift towards 3D printing multi-property programmable fluidic devices in a single step, in which integrated multimaterial valves can be used to control complex fluidic reactions for a variety of applications, including DNA assembly and analysis, continuous sampling and sensing, and soft robotics.

Large-Print Computers: An Evaluation of Their Features.

Science.gov (United States)

Morrissette, Diane L.

1984-01-01

Three large-print computers for visually handicapped users are evaluated: the Apollo Computer Terminal System, Viewscan Text System, and Visualtek Large Print Display Processor. The Apollo Professional Typing System, an option with the Apollo Terminal System, is also reviewed. Advantages and disadvantages are explored. (Author/CL)

Digital Textile Printing

OpenAIRE

Moltchanova, Julia

2011-01-01

Rapidly evolving technology of digital printing opens new opportunities on many markets. One of them is the printed fabric market where printing companies as well as clients benefit from new printing methods. This thesis focuses on the digital textile printing technology and its implementation for fabric-on-demand printing service in Finland. The purpose of this project was to study the technology behind digital textile printing, areas of application of this technology, the requirements ...

The old printed books from the Jesuit College Libraries of Lutsk diocese inXVII-XVIII centuries in the fonds of V. Vernadsky National Library of Ukraine: the historical destiny, the ways of entrance and the cultural significance

Directory of Open Access Journals (Sweden)

Tsiborovska-Rymarovich I.

2014-01-01

Full Text Available The article covers the historical and bibliological aspects pertaining to the libraries of four Jesuit Colleges which existed on the territory of the Lutsk centuries - Lutsk Jesuit College (1608-1773, Ostroh Jesuit College (1624-1773, Berestia Jesuit College (1633-1773 and Kremenets Jesuit College (1702-1773. The Libraries’ stocks encompassed books on church history and law, collections of the sermons and panegyrics, Marian editions, books on the history, activities and rules of the Society of Jesus, literature on medicine, geography and astronomy, grammar books of Latin, Greek, French and Polish languages, works of ancient writers and philosophers. Editions from the printing houses of Austria, Belgium, France, Germany, Italy, Netherlands, Switzerland were represented in the Libraries’ stocks. A group of marginal notes from the libraries’ copies, which play a distinctive role for the research into the history of libraries, are elucidated in the publication.

The future of 3D printing technology in biomedicine

Directory of Open Access Journals (Sweden)

Iraj Nabipour

2015-07-01

Full Text Available 3D printing, one of the hottest cutting-edge interdisciplinary technologies, is projected to have revenue of $8.4 billion in 2020. #D printing technology will implement the concept of personalized medicine in medical healthcare industry and pharmaceutical fabrication. Organ printing, which it is defined as computer-aided, jet based 3D tissue-engineering of living human organs, is an interesting and challengeable field for 3D printing. Customized implants and prostheses can be produced in any imaginable geometry through the translation of radiological images of patients into digital.stl 3D print files. The creation of anatomical models based on the patient’s pathological conditions using 3D printing technologies would provide good models for training and to design surgical approaches. Hence, 3D printing not only will transform medical healthcare industry but also promises new converging technologies in the field of regenerative medicine.

Performance evaluation methodology for historical document image binarization.

Science.gov (United States)

Ntirogiannis, Konstantinos; Gatos, Basilis; Pratikakis, Ioannis

2013-02-01

Document image binarization is of great importance in the document image analysis and recognition pipeline since it affects further stages of the recognition process. The evaluation of a binarization method aids in studying its algorithmic behavior, as well as verifying its effectiveness, by providing qualitative and quantitative indication of its performance. This paper addresses a pixel-based binarization evaluation methodology for historical handwritten/machine-printed document images. In the proposed evaluation scheme, the recall and precision evaluation measures are properly modified using a weighting scheme that diminishes any potential evaluation bias. Additional performance metrics of the proposed evaluation scheme consist of the percentage rates of broken and missed text, false alarms, background noise, character enlargement, and merging. Several experiments conducted in comparison with other pixel-based evaluation measures demonstrate the validity of the proposed evaluation scheme.

A laser printing based approach for printed electronics

Energy Technology Data Exchange (ETDEWEB)

Zhang, T.; Hu, M.; Guo, Q.; Zhang, W.; Yang, J., E-mail: jyang@eng.uwo.ca [Department of Mechanical and Materials Engineering, Western University, London N6A 3K7 (Canada); Liu, Y.; Lau, W. [Chengdu Green Energy and Green Manufacturing Technology R& D Center, 355 Tengfei Road, 620107 Chengdu (China); Wang, X. [Department of Mechanical and Materials Engineering, Western University, London N6A 3K7 (Canada); Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

2016-03-07

Here we report a study of printing of electronics using an office use laser printer. The proposed method eliminates those critical disadvantages of solvent-based printing techniques by taking the advantages of electroless deposition and laser printing. The synthesized toner acts as a catalyst for the electroless copper deposition as well as an adhesion-promoting buffer layer between the substrate and deposited copper. The easy metallization of printed patterns and strong metal-substrate adhesion make it an especially effective method for massive production of flexible printed circuits. The proposed process is a high throughput, low cost, efficient, and environmentally benign method for flexible electronics manufacturing.

A laser printing based approach for printed electronics

International Nuclear Information System (INIS)

Zhang, T.; Hu, M.; Guo, Q.; Zhang, W.; Yang, J.; Liu, Y.; Lau, W.; Wang, X.

2016-01-01

Here we report a study of printing of electronics using an office use laser printer. The proposed method eliminates those critical disadvantages of solvent-based printing techniques by taking the advantages of electroless deposition and laser printing. The synthesized toner acts as a catalyst for the electroless copper deposition as well as an adhesion-promoting buffer layer between the substrate and deposited copper. The easy metallization of printed patterns and strong metal-substrate adhesion make it an especially effective method for massive production of flexible printed circuits. The proposed process is a high throughput, low cost, efficient, and environmentally benign method for flexible electronics manufacturing.

3D Printing and Bioprinting in MEMS Technology

Directory of Open Access Journals (Sweden)

Chee Kai Chua

2017-07-01

Full Text Available 3D printing and bioprinting have advanced significantly in printing resolution in recent years, which presents a great potential for fabricating small and complex features suitable for microelectromechanical systems (MEMS with new functionalities. This special issue aims to give a glimpse into the future of this research field.

Grey Balance Colorimetry of the Automatically Guided Printing

Directory of Open Access Journals (Sweden)

Igor Zjakic

2005-12-01

Full Text Available Apart from visual control, it is possible to controll the ink on a print by means of auxilliary instruments - densitometer, colorimeter and spectral photometer.One of the problems in offset printing reproduction is the inconstancy of theink flow and ink consumption during the run printing. This problem appears because of the change of ink viscosity, the change of ink temperature, the change of fountain solution quantity in ink, the change of printing speed etc.This article shows the measurements of the chromatic values performed by spectral photometer on the control - signal strip from the very beginning of the run printing till 20000th print. Gray balance (CMY by means of CIE L*a*b* system has been investigated. Densitometric values of the solid area, the growth of the screen values and doubling-shear have been determined. The results of the spectrophotometric measurements of gray balance and the densitometric measurements of the solid tint have been analyzed.

Psychological peculiarities of icon perception during prayer through the lens of theological and literary texts in cultural-historical and christian context.

Directory of Open Access Journals (Sweden)

Helena DANILOV

2016-11-01

Full Text Available Psychological peculiarities of icon perception during prayer through the lens of theological and literary texts in cultural-historical and christian context. This research is dedicated to the psychotherapeutic effect of prayer in front of a Christian icon and icon mediated perception, namely the perception through the spectrum period of theological and modern literature (in Christian space, a registered historical decline known as "separation from church" time. In was identified and defined the concepts, as well as the functional pictogram and Christian prayer. For this purpose, it was investigated the theological texts and artistic works of local authors. In these texts the human being according to Christian conception, represent the symbol of a "living icon". These identify the main aim of pictogram as a mediator between human being and Higher Spirituality. The icon perception are "speculation in paints", which helps the person in building a dialogue between him and God, as the higher absolute spiritual and moral value. This research generates a main conclusion, where icon social perception of is an indicator of spiritual potential of human light.

Paper-Based Textbooks with Audio Support for Print-Disabled Students.

Science.gov (United States)

Fujiyoshi, Akio; Ohsawa, Akiko; Takaira, Takuya; Tani, Yoshiaki; Fujiyoshi, Mamoru; Ota, Yuko

2015-01-01

Utilizing invisible 2-dimensional codes and digital audio players with a 2-dimensional code scanner, we developed paper-based textbooks with audio support for students with print disabilities, called "multimodal textbooks." Multimodal textbooks can be read with the combination of the two modes: "reading printed text" and "listening to the speech of the text from a digital audio player with a 2-dimensional code scanner." Since multimodal textbooks look the same as regular textbooks and the price of a digital audio player is reasonable (about 30 euro), we think multimodal textbooks are suitable for students with print disabilities in ordinary classrooms.

Printing of Wearable Antenna on Textile

Directory of Open Access Journals (Sweden)

Khirotdin Rd. Khairilhijra

2018-01-01

Full Text Available A wearable antenna which is meant to be a part of the clothing used for communication purposes includes tracking, navigation and mobile computing has been seen in demand due to the recent miniaturization of wireless devices. Printing of conductive ink provides flexibility properties on electronics thus allowing it to be used on conformal surfaces. However, the current printing techniques mostly suffer from ink incompatibility and limited of substrates to be printed with. Hence, this paper intend to discloses the printing of wearable antenna using alternative technique via syringe-based deposition system with conductive ink on textile. A validation between simulation and measurement of return loss, (S11 and radiation pattern of the antenna printed is also performed. It was found that a functional antenna is successfully printed on textile since the performances obtained are as expected. The antenna resonated at a minimum resonant frequency of 1.82 GHz which the S11 gathered at-18.90 dB. The radiation pattern for both simulation and measurement is as predicted since both have a larger magnitude of the main lobe than the side lobe. The magnitude of the main lobe from measurement was observed to be 8.83 dB higher than the magnitude of the main lobe of the simulation which is only 3.77 dB. It is proven that the syringe-based deposition system is capable of printing functional antenna on textile.

The best printing methods to print satellite images

Directory of Open Access Journals (Sweden)

G.A. Yousif

2011-12-01

In this paper different printing systems were used to print an image of SPOT-4 satellite, caver part of Sharm Elshekh area, Sinai, Egypt, on the same type of paper as much as possible, especially in the photography. This step is followed by measuring the experimental data, and analyzed colors to determine the best printing systems for satellite image printing data. The laser system is the more printing system where produce a wider range of color and highest densities of ink and access much color detail. Followed by the offset system which it recorded the best dot gain. Moreover, the study shows that it can use the advantages of each method according to the satellite image color and quantity to be produced.

Analysis of the Optical Properties of Screen-Printed and Aerosol-Printed and Plated Fingers of Silicon Solar Cells

Directory of Open Access Journals (Sweden)

R. Woehl

2008-01-01

Full Text Available One main efficiency loss in industrial solar cells is the shading of the cell caused by the metal front side contacts. With the aerosol-printing technique plus an additional light-induced plating (LIP step, not only is the geometrical contact width narrowed compared to screen-printed contacts but also the shape of the finger changes. In this work, the effective shading of different finger types is analysed with two different measurement methods. The essential parameter for characterising the finger is the effective width which can be reduced drastically compared to the geometrical width due to total internal reflection at the glass-air layer and the reflection from the roundish edges of the contact fingers into the cell. This parameter was determined with different methods. It could be shown that for aerosol-printed fingers the effective (optical width is only 38% of its geometrical width, while for standard screen-printed fingers it is 47%. The measured values are compared to a theoretical model for an aerosol-printed and plated finger and are in good agreement.

Steganography and Prospects of Its Application in Protection of Printing Documents

Directory of Open Access Journals (Sweden)

M. O. Zhmakin

2010-09-01

Full Text Available In the article the principle of steganography reveals. Three modern directions of concealment of the information are presented. Application classical steganography in printing prints is described.

Historical time in the age of big data: Cultural psychology, historical change, and the Google Books Ngram Viewer.

Science.gov (United States)

Pettit, Michael

2016-05-01

Launched in 2010, the Google Books Ngram Viewer offers a novel means of tracing cultural change over time. This digital tool offers exciting possibilities for cultural psychology by rendering questions about variation across historical time more quantitative. Psychologists have begun to use the viewer to bolster theories about a historical shift in the United States from a more collectivist to individualist form of selfhood and society. I raise 4 methodological cautions about the Ngram Viewer's use among psychologists: (a) the extent to which print culture can be taken to represent culture as a whole, (b) the difference between viewing the past in terms of trends versus events, (c) assumptions about the stability of a word's meaning over time, and (d) inconsistencies in the scales and ranges used to measure change over time. The aim is to foster discussion about the standards of evidence needed for incorporating historical big data into empirical research. (c) 2016 APA, all rights reserved).

An early modern mass medium : The adventures of Cartouche in Dutch penny prints (1700-1900)

NARCIS (Netherlands)

Salman, J.L.

2018-01-01

This article demonstrates the social and cultural significance of eighteenth and nineteenth century Dutch penny prints – one of the first mass media in European history. By using a combination of media and cultural historical approaches (Henry Jenkins, John Fiske) and an anthropological perspective

History, Historical and Historicity in Heidegger

Directory of Open Access Journals (Sweden)

José Manuel CHILLÓN

2017-12-01

Full Text Available In order to the “Historie” is possible as “Geschichte”, that is, so that the events are more than mere collections of past vestiges, it is necessary that the historical (geschichtlich of history is understood as enshrined in the historicity, in Geschichtlichkeit. In § 6 of the Introduction to ‘Being and Time’ Heidegger understands that the historicity refers to the temporality of Dasein, to its finitude. Thiking of the historicity requires, as its main task, overcoming history as history of entities, in terms of history of forgotten being. And, of course, to think the being, the happening of being and Dasein which, as such event, is being, is occurring , it is historicizing .

Development of a Hydrogen Peroxide Sensor Based on Screen-Printed Electrodes Modified with Inkjet-Printed Prussian Blue Nanoparticles

Directory of Open Access Journals (Sweden)

Stefano Cinti

2014-08-01

Full Text Available A sensor for the simple and sensitive measurement of hydrogen peroxide has been developed which is based on screen printed electrodes (SPEs modified with Prussian blue nanoparticles (PBNPs deposited using piezoelectric inkjet printing. PBNP-modified SPEs were characterized using physical and electrochemical techniques to optimize the PBNP layer thickness and electroanalytical conditions for optimum measurement of hydrogen peroxide. Sensor optimization resulted in a limit of detection of 2 × 10−7 M, a linear range from 0 to 4.5 mM and a sensitivity of 762 μA∙mM–1∙cm–2 which was achieved using 20 layers of printed PBNPs. Sensors also demonstrated excellent reproducibility (<5% rsd.

Printed Persian Subword Recognition Using Wavelet Packet Descriptors

Directory of Open Access Journals (Sweden)

Samira Nasrollahi

2013-01-01

Full Text Available In this paper, we present a new approach to offline OCR (optical character recognition for printed Persian subwords using wavelet packet transform. The proposed algorithm is used to extract font invariant and size invariant features from 87804 subwords of 4 fonts and 3 sizes. The feature vectors are compressed using PCA. The obtained feature vectors yield a pictorial dictionary for which an entry is the mean of each group that consists of the same subword with 4 fonts in 3 sizes. The sets of these features are congregated by combining them with the dot features for the recognition of printed Persian subwords. To evaluate the feature extraction results, this algorithm was tested on a set of 2000 subwords in printed Persian text documents. An encouraging recognition rate of 97.9% is got at subword level recognition.

Recent trends in print portals and Web2Print applications

Science.gov (United States)

Tuijn, Chris

2009-01-01

For quite some time now, the printing business has been under heavy pressure because of overcapacity, dropping prices and the delocalization of the production to low income countries. To survive in this competitive world, printers have to invest in tools that, on one hand, reduce the production costs and, on the other hand, create additional value for their customers (print buyers). The creation of customer portals on top of prepress production systems allowing print buyers to upload their content, approve the uploaded pages based on soft proofs (rendered by the underlying production system) and further follow-up the generation of the printed material, has been illustrative in this respect. These developments resulted in both automation for the printer and added value for the print buyer. Many traditional customer portals assume that the printed products have been identified before they are presented to the print buyer in the portal environment. The products are, in this case, typically entered by the printing organization in a so-called MISi system after the official purchase order has been received from the print buyer. Afterwards, the MIS system then submits the product to the customer portal. Some portals, however, also support the initiation of printed products by the print buyer directly. This workflow creates additional flexibility but also makes things much more complex. We here have to distinguish between special products that are defined ad-hoc by the print buyer and standardized products that are typically selected out of catalogs. Special products are most of the time defined once and the level of detail required in terms of production parameters is quite high. Systems that support such products typically have a built-in estimation module, or, at least, a direct connection to an MIS system that calculates the prices and adds a specific mark-up to calculate a quote. Often, the markup is added by an account manager on a customer by customer basis; in this

Novel Biomaterials Used in Medical 3D Printing Techniques

Directory of Open Access Journals (Sweden)

Karthik Tappa

2018-02-01

Full Text Available The success of an implant depends on the type of biomaterial used for its fabrication. An ideal implant material should be biocompatible, inert, mechanically durable, and easily moldable. The ability to build patient specific implants incorporated with bioactive drugs, cells, and proteins has made 3D printing technology revolutionary in medical and pharmaceutical fields. A vast variety of biomaterials are currently being used in medical 3D printing, including metals, ceramics, polymers, and composites. With continuous research and progress in biomaterials used in 3D printing, there has been a rapid growth in applications of 3D printing in manufacturing customized implants, prostheses, drug delivery devices, and 3D scaffolds for tissue engineering and regenerative medicine. The current review focuses on the novel biomaterials used in variety of 3D printing technologies for clinical applications. Most common types of medical 3D printing technologies, including fused deposition modeling, extrusion based bioprinting, inkjet, and polyjet printing techniques, their clinical applications, different types of biomaterials currently used by researchers, and key limitations are discussed in detail.

Goethe in the Hall and His Journeys in Printed Rome

Directory of Open Access Journals (Sweden)

Victor Plahte Tschudi

2015-12-01

Full Text Available The article focuses on graphic reproductions in Johann Wolfgang von Goethe’s 'Italian Journey'. This travel account gives a clear sense of how important prints were as part of Goethe’s education and preparation for the encounter with classical Roman monuments. As the text itself was edited and rewritten thirty to forty years after the journey itself, however, prints also became crucial in the attempt to remember that journey. In other words, the author of the 'Journey', in contrast to the youthful traveler, no longer sees engravings of Rome, but Rome through engravings. The discussion takes as a point of departure Goethe’s vast collection of prints, still kept in Weimar. Measured up against the references in the travel journal, prints not only reflected his impression of monuments, but also structured those impressions, as the elderly man looks back and reassembles his memories to make an official account of his life. However, it is too easy to ascribe this reliance on prints to a fading memory — on the contrary. As he grows into old age, Goethe’s idea of graphic reproduction evolves in parallel with his increasingly refined theories of nature. His growing preference for prints depicted as ruins reflects the aging author’s own sense of change and transformation.

Effects of ozone on the various digital print technologies: Photographs and documents

Energy Technology Data Exchange (ETDEWEB)

Burge, D; Gordeladze, N; Bigourdan, J-L; Nishimura, D, E-mail: dmbpph@rit.ed [Image Permanence Institute at Rochester Institute of Technology, 70 Lomb Memorial Drive, Rochester, NY 14623 (United States)

2010-06-01

The harmful effects of ozone on inkjet photographs have been well documented. This project expands on that research by performing ozone tests on a greater variety of digital prints including colour electrophotographic and dye sublimation. The sensitivities of these materials are compared to traditionally printed materials (black-and-white electrophotographic, colour photographic and offset lithographic) to determine if the digital prints require special care practices. In general, the digital prints were more sensitive to ozone than traditional prints. Dye inkjet prints were more sensitive to fade than pigment inkjet, though pigment was not immune. The dye sublimation, colour electrophotographic (dry and liquid toner), and traditional print systems were relatively resistant to ozone. Text-based documents were evaluated in addition to photographic images, since little work has been done to determine if the type of object (image or text) has an impact on its sensitivity to ozone. The results showed that documents can be more resistant to ozone than photographs even when created using the same printer and inks. It is recommended that cultural heritage institutions not expose their porous-coated, dye-based inkjet photos to open air for extended periods of time. Other inkjet prints should be monitored for early signs of change.

Effects of ozone on the various digital print technologies: Photographs and documents

International Nuclear Information System (INIS)

Burge, D; Gordeladze, N; Bigourdan, J-L; Nishimura, D

2010-01-01

The harmful effects of ozone on inkjet photographs have been well documented. This project expands on that research by performing ozone tests on a greater variety of digital prints including colour electrophotographic and dye sublimation. The sensitivities of these materials are compared to traditionally printed materials (black-and-white electrophotographic, colour photographic and offset lithographic) to determine if the digital prints require special care practices. In general, the digital prints were more sensitive to ozone than traditional prints. Dye inkjet prints were more sensitive to fade than pigment inkjet, though pigment was not immune. The dye sublimation, colour electrophotographic (dry and liquid toner), and traditional print systems were relatively resistant to ozone. Text-based documents were evaluated in addition to photographic images, since little work has been done to determine if the type of object (image or text) has an impact on its sensitivity to ozone. The results showed that documents can be more resistant to ozone than photographs even when created using the same printer and inks. It is recommended that cultural heritage institutions not expose their porous-coated, dye-based inkjet photos to open air for extended periods of time. Other inkjet prints should be monitored for early signs of change.

Effect of layer thickness and printing orientation on mechanical properties and dimensional accuracy of 3D printed porous samples for bone tissue engineering.

Directory of Open Access Journals (Sweden)

Arghavan Farzadi

Full Text Available Powder-based inkjet 3D printing method is one of the most attractive solid free form techniques. It involves a sequential layering process through which 3D porous scaffolds can be directly produced from computer-generated models. 3D printed products' quality are controlled by the optimal build parameters. In this study, Calcium Sulfate based powders were used for porous scaffolds fabrication. The printed scaffolds of 0.8 mm pore size, with different layer thickness and printing orientation, were subjected to the depowdering step. The effects of four layer thicknesses and printing orientations, (parallel to X, Y and Z, on the physical and mechanical properties of printed scaffolds were investigated. It was observed that the compressive strength, toughness and Young's modulus of samples with 0.1125 and 0.125 mm layer thickness were more than others. Furthermore, the results of SEM and μCT analyses showed that samples with 0.1125 mm layer thickness printed in X direction have more dimensional accuracy and significantly close to CAD software based designs with predefined pore size, porosity and pore interconnectivity.

Influence of Software on the Features of Laser-printed Characters

Directory of Open Access Journals (Sweden)

Yuanli Han

2017-01-01

Full Text Available Verifying the authenticity or otherwise of printed documents is one of the most important aspects of questioned document examination and plays a vital role in the field of forensic science. In recent years, continued developments in the quality of impression combined with ever-cheaper toner printers have allowed this technology to spread. It is now used in an increasing number of homes for all types of documents, including for criminal aims. Here, the factors that influence the printed features in text files are studied in relation to the operating system and the word processing software. The Net Application report in October 2014 showed that the market shares of Windows 7 and Windows XP were 53.05% and 17.18%, respectively. The Forrester report in October 2013 showed that the market share of Microsoft Office was more than 85%, the top three word processors being Microsoft Word 2003, 2007, and 2010. In this study, Windows XP (shortened to XP, Windows 7 (shortened to Win7, Microsoft Word 2003/2007/2010, WPS Office 2013, and the PDF format are chosen as the most common operating systems and word processing software. WPS Office was developed by the Chinese company Kingsoft Co., Ltd. and is widely used in China. A particular text file was designed and edited and was printed on a laser printer. The features of the printed characters were captured using an Anyty 3R digital microscope, Printer Expert, and X-printer devices. Coincidence comparison and outline feature extraction were used to evaluate the differences. It is shown that XP and Win7 have no effect on the printed features of text files. However, the printed features do depend to a certain extent on the word-processing software, with the PDF format having the greatest influence.

REAL TIME QUALITY CONTROL OF THE HEATSET OFFSET PRINTING PROCESS

Directory of Open Access Journals (Sweden)

Răzvan-George RĂCHERU

2016-05-01

Full Text Available Offset lithography is one of the most common ways of creating printed materials. Compared to other printing methods, offset printing is best suited for economically producing large volumes of high quality prints in a manner that requires little maintenance. Because of the high speed and the high volume of the printing press, we have to rely on automation for press control and not just to the printer’s eye. When printing an image that has more than one color, it is necessary to print each color separately and ensure each color overlaps the others precisely. If this is not done, the finished image will look fuzzy, blurred or "out of register". To help line the colors up correctly, a system of registration is necessary. Therefore, the use of an automated real time quality control system will result in a more consistent color for the customer and less waste for the printer.

Digital Inkjet Textile Printing

OpenAIRE

Wang, Meichun

2017-01-01

Digital inkjet textile printing is an emerging technology developed with the rise of the digital world. It offers a possibility to print high-resolution images with unlimited color selection on fabrics. Digital inkjet printing brings a revolutionary chance for the textile printing industry. The history of textile printing shows the law how new technology replaces the traditional way of printing. This indicates the future of digital inkjet textile printing is relatively positive. Differen...

Dramatic Advance in Quality in Flexographic Printing

Directory of Open Access Journals (Sweden)

Jochen Richter

2004-12-01

Full Text Available The enormous changes in flexography printing in recent years concerning the printing quality achievable cannot generally be ascribed to a single revolutionary invention, but are the result of continuous developments to the complete system. Thus the direct drive technology in all machine types and its associated advantages in terms of printing length corrections has become established since drupa 2000. The race for ever finer raster rolls has also been completed to the benefit of improvements in bowl geometry and in ceramic surfaces. Clearly improved colour transfer behaviour has become feasible as a result. In a closely intermeshed system such as flexography printing this naturally has to have an effect on the printing colours used. Further improvements in bonding agents and pigment concentrations now allow users to print ever thinner colour layers while maintaining all of the required authenticities.Furthermore, it has become possible to reduce additional disturbing characteristics in the UV colour area, such as the unpleasant odour. While the digital imaging of printing plates has primarily been improved in terms of economic efficiency by the use of up to eight parallel laser beams, extreme improvements in the system are noticeable especially in the area of directly engraved printing moulds. Whereas many still dismissed directly engraved polymer plates at the last drupa as a laboratory system, the first installation was recently placed on the market a mere three years later. A further noteworthy innovation of recent years that has reached market maturity is thin sleeve technology, which combines the advantages of a photopolymer plate with a round imaged printing mould. There are no high sleeve costs for each printing mould, except for one-off cost for an adapter sleeve. To conclude, it can be said that although flexography printing has experienced many new features in the time between drupa 2000 and today, it still has enormous potential for

Design and 3D Printing of Scaffolds and Tissues

Directory of Open Access Journals (Sweden)

Jia An

2015-06-01

Full Text Available A growing number of three-dimensional (3D-printing processes have been applied to tissue engineering. This paper presents a state-of-the-art study of 3D-printing technologies for tissue-engineering applications, with particular focus on the development of a computer-aided scaffold design system; the direct 3D printing of functionally graded scaffolds; the modeling of selective laser sintering (SLS and fused deposition modeling (FDM processes; the indirect additive manufacturing of scaffolds, with both micro and macro features; the development of a bioreactor; and 3D/4D bioprinting. Technological limitations will be discussed so as to highlight the possibility of future improvements for new 3D-printing methodologies for tissue engineering.

Printed photodetectors

International Nuclear Information System (INIS)

Pace, Giuseppina; Grimoldi, Andrea; Sampietro, Marco; Natali, Dario; Caironi, Mario

2015-01-01

Photodetectors convert light pulses into electrical signals and are fundamental building blocks for any opto-electronic system adopting light as a probe or information carrier. They have widespread technological applications, from telecommunications to sensors in industrial, medical and civil environments. Further opportunities are plastic short-range communications systems, interactive large-area surfaces and light-weight, flexible, digital imagers. These applications would greatly benefit from the cost-effective fabrication processes enabled by printing technology. While organic semiconductors are the most investigated materials for printed photodetectors, and are the main focus of the present review, there are notable examples of other inorganic or hybrid printable semiconductors for opto-electronic systems, such as quantum-dots and nanowires. Here we propose an overview on printed photodetectors, including three-terminal phototransistors. We first give a brief account of the working mechanism of these light sensitive devices, and then we review the recent progress achieved with scalable printing techniques such as screen-printing, inkjet and other non-contact technologies in the development of all-printed or hybrid systems. (paper)

Printed photodetectors

Science.gov (United States)

Pace, Giuseppina; Grimoldi, Andrea; Sampietro, Marco; Natali, Dario; Caironi, Mario

2015-10-01

Photodetectors convert light pulses into electrical signals and are fundamental building blocks for any opto-electronic system adopting light as a probe or information carrier. They have widespread technological applications, from telecommunications to sensors in industrial, medical and civil environments. Further opportunities are plastic short-range communications systems, interactive large-area surfaces and light-weight, flexible, digital imagers. These applications would greatly benefit from the cost-effective fabrication processes enabled by printing technology. While organic semiconductors are the most investigated materials for printed photodetectors, and are the main focus of the present review, there are notable examples of other inorganic or hybrid printable semiconductors for opto-electronic systems, such as quantum-dots and nanowires. Here we propose an overview on printed photodetectors, including three-terminal phototransistors. We first give a brief account of the working mechanism of these light sensitive devices, and then we review the recent progress achieved with scalable printing techniques such as screen-printing, inkjet and other non-contact technologies in the development of all-printed or hybrid systems.

3D printing PLGA: a quantitative examination of the effects of polymer composition and printing parameters on print resolution.

Science.gov (United States)

Guo, Ting; Holzberg, Timothy R; Lim, Casey G; Gao, Feng; Gargava, Ankit; Trachtenberg, Jordan E; Mikos, Antonios G; Fisher, John P

2017-04-12

In the past few decades, 3D printing has played a significant role in fabricating scaffolds with consistent, complex structure that meet patient-specific needs in future clinical applications. Although many studies have contributed to this emerging field of additive manufacturing, which includes material development and computer-aided scaffold design, current quantitative analyses do not correlate material properties, printing parameters, and printing outcomes to a great extent. A model that correlates these properties has tremendous potential to standardize 3D printing for tissue engineering and biomaterial science. In this study, we printed poly(lactic-co-glycolic acid) (PLGA) utilizing a direct melt extrusion technique without additional ingredients. We investigated PLGA with various lactic acid:glycolic acid (LA:GA) molecular weight ratios and end caps to demonstrate the dependence of the extrusion process on the polymer composition. Micro-computed tomography was then used to evaluate printed scaffolds containing different LA:GA ratios, composed of different fiber patterns, and processed under different printing conditions. We built a statistical model to reveal the correlation and predominant factors that determine printing precision. Our model showed a strong linear relationship between the actual and predicted precision under different combinations of printing conditions and material compositions. This quantitative examination establishes a significant foreground to 3D print biomaterials following a systematic fabrication procedure. Additionally, our proposed statistical models can be applied to couple specific biomaterials and 3D printing applications for patient implants with particular requirements.

3D printing PLGA: a quantitative examination of the effects of polymer composition and printing parameters on print resolution

Science.gov (United States)

Guo, Ting; Holzberg, Timothy R; Lim, Casey G; Gao, Feng; Gargava, Ankit; Trachtenberg, Jordan E; Mikos, Antonios G; Fisher, John P

2018-01-01

In the past few decades, 3D printing has played a significant role in fabricating scaffolds with consistent, complex structure that meet patient-specific needs in future clinical applications. Although many studies have contributed to this emerging field of additive manufacturing, which includes material development and computer-aided scaffold design, current quantitative analyses do not correlate material properties, printing parameters, and printing outcomes to a great extent. A model that correlates these properties has tremendous potential to standardize 3D printing for tissue engineering and biomaterial science. In this study, we printed poly(lactic-co-glycolic acid) (PLGA) utilizing a direct melt extrusion technique without additional ingredients. We investigated PLGA with various lactic acid: glycolic acid (LA:GA) molecular weight ratios and end caps to demonstrate the dependence of the extrusion process on the polymer composition. Micro-computed tomography was then used to evaluate printed scaffolds containing different LA:GA ratios, composed of different fiber patterns, and processed under different printing conditions. We built a statistical model to reveal the correlation and predominant factors that determine printing precision. Our model showed a strong linear relationship between the actual and predicted precision under different combinations of printing conditions and material compositions. This quantitative examination establishes a significant foreground to 3D print biomaterials following a systematic fabrication procedure. Additionally, our proposed statistical models can be applied to couple specific biomaterials and 3D printing applications for patient implants with particular requirements. PMID:28244880

48 CFR 952.208-70 - Printing.

Science.gov (United States)

2010-10-01

... SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.208-70 Printing. As prescribed... reproduction in excess of the limits set forth above, the Contractor shall notify the Contracting Officer in...

Definition of Quality Criteria of the Technological Process of Narrow Web UV-Printing

Directory of Open Access Journals (Sweden)

Volodymyr Shybanov

2013-11-01

Full Text Available The application of Narrow Web UV-flexographic printing has several advantages compared with offset printing. In particular, they are the lack of the operation of water-ink balance setting in the technological process, the ability to print on a wide range of materials and so on. Though the imprint quality is clearly based on standards in offset printing, there are no clearly indicated requirements for Narrow Web UV flexographic printing. The absence of such requirements on quality parameters of the technological process of Narrow Web UV-Printing predetermined conducting its analysis with the help of expert surveys.

THE DISTRIBUTION NETWORK DEVELOPEMENT IN PRINT MEDIA

Directory of Open Access Journals (Sweden)

Loredana Iordache

2012-09-01

Full Text Available In this article, we identify the characteristics of the distribution networks in print media and the features ofmarketing in mass media, emphasising the attempts initiated by the press in the context of the financial crisis. Theresearch was conducted through a case study on regional newspaper,, Gazeta de Sud'' The main problems analyzedwere decreasing newspaper circulation and advertising. The research taken into account trends and developmentsworldwide print media as well as print media particularities of Romania, with a focus on identifying factors thatcontributed to the closure of a significant number of newspapers, or their transition from printed version online format.The paper is mainly focused on some practical issues related to the way of organizing the print media sales networks,the authors elaborating proposals for the implementation of certain measures to increase the circulation, on the onehand, and on the hand, to increase the sale of ad space in the newspaper. Compared with other products, thenewspaper has unique characteristics caused by daily changing content, and therefore the product itself. Having ahighly perishable, the content of media products should always seen in relation to time, which requires more rapiddistribution and continuous production.

Algorithms of control parameters selection for automation of FDM 3D printing process

Directory of Open Access Journals (Sweden)

Kogut Paweł

2017-01-01

Full Text Available The paper presents algorithms of control parameters selection of the Fused Deposition Modelling (FDM technology in case of an open printing solutions environment and 3DGence ONE printer. The following parameters were distinguished: model mesh density, material flow speed, cooling performance, retraction and printing speeds. These parameters are independent in principle printing system, but in fact to a certain degree that results from the selected printing equipment features. This is the first step for automation of the 3D printing process in FDM technology.

A teaching proposal on electrostatics based on the history of science through the reading of historical texts and argumentative discussions

International Nuclear Information System (INIS)

Castells, Marina; Konstantinidou, Aikaterini; Cerveró, Josep M.

2015-01-01

Researches on electrostatics’ conceptions found that students have ideas and conceptions that disagree with the scientific models and that might explain students’ learning difficulties. To favour the change of student’s ideas and conceptions, a teaching sequence that relies on a historical study of electrostatics is proposed. It begins with an exploration of electrostatics phenomena that students would do with everyday materials. About these phenomena they must draw their own explanations that will be shared and discussed in the class. The teacher will collect and summarize the ideas and explanations which are nearer the history of science. A brief history of electrostatics is introduced then, and some texts from scientists are used in an activity role-play-debate type in which the 'supporters of a single fluid' and 'supporters of two fluids' have to present arguments for their model and/or against the other model to explain the phenomena observed in the exploration phase. In the following, students will read texts related to science applications, the main aim of this activity is to relate electrostatics phenomena with current electricity. The first text explains how Franklin understood the nature of the lightning and the lightning rod and the second is a chapter of a roman about one historical episode situated in the Barcelona of the XVIII Century. Students will use the historical models of one and of two fluids to explain these two phenomena, and will compare them with the scientific explanation of the 'accepted' science of nowadays introduced by the teacher. With this type of teaching proposal, conceptual aspect of electrostatics will be learnt, but also the students will learn about the nature and history of science and culture, as well as about the practice of argumentation.

A teaching proposal on electrostatics based on the history of science through the reading of historical texts and argumentative discussions

Science.gov (United States)

Castells, Marina; Konstantinidou, Aikaterini; Cerveró, Josep M.

2016-05-01

Researches on electrostatics' conceptions found that students have ideas and conceptions that disagree with the scientific models and that might explain students' learning difficulties. To favour the change of student's ideas and conceptions, a teaching sequence that relies on a historical study of electrostatics is proposed. It begins with an exploration of electrostatics phenomena that students would do with everyday materials. About these phenomena they must draw their own explanations that will be shared and discussed in the class. The teacher will collect and summarize the ideas and explanations which are nearer the history of science. A brief history of electrostatics is introduced then, and some texts from scientists are used in an activity role-play-debate type in which the "supporters of a single fluid" and "supporters of two fluids" have to present arguments for their model and/or against the other model to explain the phenomena observed in the exploration phase. In the following, students will read texts related to science applications, the main aim of this activity is to relate electrostatics phenomena with current electricity. The first text explains how Franklin understood the nature of the lightning and the lightning rod and the second is a chapter of a roman about one historical episode situated in the Barcelona of the XVIII Century. Students will use the historical models of one and of two fluids to explain these two phenomena, and will compare them with the scientific explanation of the "accepted" science of nowadays introduced by the teacher. With this type of teaching proposal, conceptual aspect of electrostatics will be learnt, but also the students will learn about the nature and history of science and culture, as well as about the practice of argumentation.

Clinical Application of Three-Dimensional Printing Technology in Craniofacial Plastic Surgery

Directory of Open Access Journals (Sweden)

Jong Woo Choi

2015-05-01

Full Text Available Three-dimensional (3D printing has been particularly widely adopted in medical fields. Application of the 3D printing technique has even been extended to bio-cell printing for 3D tissue/organ development, the creation of scaffolds for tissue engineering, and actual clinical application for various medical parts. Of various medical fields, craniofacial plastic surgery is one of areas that pioneered the use of the 3D printing concept. Rapid prototype technology was introduced in the 1990s to medicine via computer-aided design, computer-aided manufacturing. To investigate the current status of 3D printing technology and its clinical application, a systematic review of the literature was conducted. In addition, the benefits and possibilities of the clinical application of 3D printing in craniofacial surgery are reviewed, based on personal experiences with more than 500 craniofacial cases conducted using 3D printing tactile prototype models.

Advances in digital printing and quality considerations of digitally printed images

Science.gov (United States)

Waes, Walter C.

1997-02-01

The traditional 'graphic arts' market has changed very rapidly. It has been only ten years now since Aldus introduced its 'PageMaker' software for text and layout. The platform used was Apple-Mac, which became also the standard for many other graphic applications. The so-called high-end workstations disappeared. This was the start for what later was called: the desk top publishing revolution. At the same time, image scanning became also user-friendly and heavy duty scanners were reduced to desktop-size. Color- reproduction became a commodity product. Since then, the pre-press industry has been going through a technical nightmare, trying to keep up with the digital explosion. One after another, tasks and crafts of pre-press were being transformed by digital technologies. New technologies in this field came almost too fast for many people to adapt. The next digital revolution will be for the commercial printers. All the reasons are explained later in this document. There is now a definite need for a different business-strategy and a new positioning in the electronic media-world. Niches have to be located for new graphic arts- applications. Electronic services to-and-from originators' and executors environments became a requirement. Data can now flow on-line between the printer and the originator of the job. It is no longer the pre-press shop who is controlling this. In many cases, electronic data goes between the print-buyer or agency and the printer. High power communication-systems with accepted standard color- management are transforming the printer, and more particularly, the pre-press shop fatally. The new digital printing market, now in the beginning of its expected full expansion, has to do with growing requests coming from agencies and other print-buyers for: (1) short-run printing; (2) print-on-demand approximately in-time; (3) personalization or other forms of customization; (4) quick turnaround.

Printing Insecurity? The Security Implications of 3D-Printing of Weapons.

Science.gov (United States)

Walther, Gerald

2015-12-01

In 2013, the first gun printed out of plastic by a 3D-printer was successfully fired in the U.S. This event caused a major media hype about the dangers of being able to print a gun. Law enforcement agencies worldwide were concerned about this development and the potentially huge security implications of these functional plastic guns. As a result, politicians called for a ban of these weapons and a control of 3D-printing technology. This paper reviews the security implications of 3D-printing technology and 3D guns. It argues that current arms control and transfer policies are adequate to cover 3D-printed guns as well. However, while this analysis may hold up currently, progress in printing technology needs to be monitored to deal with future dangers pre-emptively.

EDMS based workflow for Printing Industry

Directory of Open Access Journals (Sweden)

Prathap Nayak

2013-04-01

Full Text Available Information is indispensable factor of any enterprise. It can be a record or a document generated for every transaction that is made, which is either a paper based or in electronic format for future reference. A Printing Industry is one such industry in which managing information of various formats, with latest workflows and technologies, could be a nightmare and a challenge for any operator or an user when each process from the least bit of information to a printed product are always dependendent on each other. Hence the information has to be harmonized artistically in order to avoid production downtime or employees pointing fingers at each other. This paper analyses how the implementation of Electronic Document Management System (EDMS could contribute to the Printing Industry for immediate access to stored documents within and across departments irrespective of geographical boundaries. The paper outlines initially with a brief history, contemporary EDMS system and some illustrated examples with a study done by choosing Library as a pilot area for evaluating EDMS. The paper ends with an imitative proposal that maps several document management based activities for implementation of EDMS for a Printing Industry.

3D printing of octacalcium phosphate bone substitutes

Directory of Open Access Journals (Sweden)

Vladimir S. Komlev

2015-06-01

Full Text Available Biocompatible calcium phosphate ceramic grafts are able of supporting new bone formation in appropriate environment. The major limitation of these materials usage for medical implants is the absence of accessible methods for their patient-specific fabrication. 3D printing methodology is an excellent approach to overcome the limitation supporting effective and fast fabrication of individual complex bone substitutes. Here we proposed a relatively simple route for 3D printing of octacalcium phosphates in complexly shaped structures by the combination of inkjet printing with post-treatment methodology. The printed octacalcium phosphate blocks were further implanted in the developed cranial bone defect followed by histological evaluation. The obtained result confirmed the potential of the developed octacalcium phosphates bone substitutes, which allowed 2.5-time reducing of defect’s diameter at 6.5 months in a region where native bone repair is extremely inefficient.

ACTIVATED ADSORPTION ON CLAY OF MICROPOLLUTANTS FROM PAPER PRINTING INDUSTRY

Directory of Open Access Journals (Sweden)

DIANA C. MIRILĂ

2018-03-01

Full Text Available The paper presents a preliminary study of chemisorption onto anionic and cationic clays, in order to reduce the content of pollutants from a paper printing effluent, collected after technological step named: printing of paper fabric manufacturing. The procedure of filtration fallowed by adsorption process is an effective, fast and low cost technique for treatment of black effluent resulting from paper printing industry. The key parameters tested to achieve a high efficiency for the movement of micropollutants from printing fluid were substrate dose and contact time. The highest treatment performance was obtained for cationic substrate at pH = 6.80, in contact and agitated magnetically for 30 respectively 90 minutes at room temperature.

Inkjet printing technology and conductive inks synthesis for microfabrication techniques

International Nuclear Information System (INIS)

Dang, Mau Chien; Dung Dang, Thi My; Fribourg-Blanc, Eric

2013-01-01

Inkjet printing is an advanced technique which reliably reproduces text, images and photos on paper and some other substrates by desktop printers and is now used in the field of materials deposition. This interest in maskless materials deposition is coupled with the development of microfabrication techniques for the realization of circuits or patterns on flexible substrates for which printing techniques are of primary interest. This paper is a review of some results obtained in inkjet printing technology to develop microfabrication techniques at Laboratory for Nanotechnology (LNT). Ink development, in particular conductive ink, study of printed patterns, as well as application of these to the realization of radio-frequency identification (RFID) tags on flexible substrates, are presented. (paper)

Effect of Cartoon Illustrations on the Comprehension and Evaluation of Information Presented in the Print and Audio Mode.

Science.gov (United States)

Sewell, Edward H., Jr.

This study investigates the effects of cartoon illustrations on female and male college student comprehension and evaluation of information presented in several combinations of print, audio, and visual formats. Subjects were assigned to one of five treatment groups: printed text, printed text with cartoons, audiovisual presentations, audio only…

Influences of three-dimensional printing to product innovation design thinking

Directory of Open Access Journals (Sweden)

Liu Ling

2017-01-01

Full Text Available The increasing demand of individuation brings new challenges to traditional product design. This paper studies and analyzes three-dimensional print technology promotes the future development of product innovation design. The advantages of 3D printing equipment can help creative products enterprises shorten product manufacturing period and make them powerful in competition.

DNA Assembly in 3D Printed Fluidics.

Directory of Open Access Journals (Sweden)

William G Patrick

Full Text Available The process of connecting genetic parts-DNA assembly-is a foundational technology for synthetic biology. Microfluidics present an attractive solution for minimizing use of costly reagents, enabling multiplexed reactions, and automating protocols by integrating multiple protocol steps. However, microfluidics fabrication and operation can be expensive and requires expertise, limiting access to the technology. With advances in commodity digital fabrication tools, it is now possible to directly print fluidic devices and supporting hardware. 3D printed micro- and millifluidic devices are inexpensive, easy to make and quick to produce. We demonstrate Golden Gate DNA assembly in 3D-printed fluidics with reaction volumes as small as 490 nL, channel widths as fine as 220 microns, and per unit part costs ranging from $0.61 to $5.71. A 3D-printed syringe pump with an accompanying programmable software interface was designed and fabricated to operate the devices. Quick turnaround and inexpensive materials allowed for rapid exploration of device parameters, demonstrating a manufacturing paradigm for designing and fabricating hardware for synthetic biology.

From the printer: Potential of three-dimensional printing for orthopaedic applications

Directory of Open Access Journals (Sweden)

Sze-Wing Mok

2016-07-01

Full Text Available Three-dimensional (3D printers can create complex structures based on digital models. The combination of medical diagnostic imaging with 3D printing has great potential in day-to-day clinics for patient-specific solutions and applications. In the musculoskeletal system, 3D printing is used to create custom-made implants, patient-specific instrumentation, and to regenerate tissues, in particular bone and cartilage. The major limiting factors for bioprinting include the lack of printing techniques with optimal printing resolution and materials with ideal mechanical strengths while maintaining cellular functionality. Before “tissues from the printer” can be widely applied, further research and development on improving and optimising printing techniques and biomaterials, and knowledge on the development of printed constructs into living tissues, is essential for future clinical application of this technology.

THE IDENTIFICATION OF EAR PRINTS USING COMPLEX GABOR FILTERS

Directory of Open Access Journals (Sweden)

Alexander A S Gunawan

2012-05-01

Full Text Available Biometrics is a method used to recognize humans based on one or a few characteristicsphysical or behavioral traits that are unique such as DNA, face, fingerprints, gait, iris, palm, retina,signature and sound. Although the facts that ear prints are found in 15% of crime scenes, ear printsresearch has been very limited since the success of fingerprints modality. The advantage of the useof ear prints, as forensic evidence, are it relatively unchanged due to increased age and have fewervariations than faces with expression variation and orientation. In this research, complex Gaborfilters is used to extract the ear prints feature based on texture segmentation. Principal componentanalysis (PCA is then used for dimensionality-reduction where variation in the dataset ispreserved. The classification is done in a lower dimension space defined by principal componentsbased on Euclidean distance. In experiments, it is used left and right ear prints of ten respondentsand in average, the successful recognition rate is 78%. Based on the experiment results, it isconcluded that ear prints is suitable as forensic evidence mainly when combined with otherbiometric modalities.Keywords: Biometrics; Ear prints; Complex Gabor filters; Principal component analysis;Euclidean distance

Development Directions of Innovative Processes in Publishing and Printing Industry

Directory of Open Access Journals (Sweden)

Kotlyarevsky, Ya.V.

2015-03-01

Full Text Available Provision of innovative development of publishing and printing industry in the context of global trends is investigated. Generalized characteristic of organizational and economic relations arising due to development of publishing and printing spheres on the basis of innovation is presented; an attempt to evaluate their impact and the prospects for the national economy is made.

A guide to printed circuit board design

CERN Document Server

Hamilton, Charles

1984-01-01

A Guide to Printed Circuit Board Design discusses the basic design principles of printed circuit board (PCB). The book consists of nine chapters; each chapter provides both text discussion and illustration relevant to the topic being discussed. Chapter 1 talks about understanding the circuit diagram, and Chapter 2 covers how to compile component information file. Chapter 3 deals with the design layout, while Chapter 4 talks about preparing the master artworks. The book also covers generating computer aided design (CAD) master patterns, and then discusses how to prepare the production drawing a

Printed Organic and Inorganic Electronics: Devices To Systems

KAUST Repository

Sevilla, Galo T.

2016-11-11

Affordable and versatile printed electronics can play a critical role for large area applications, such as for displays, sensors, energy harvesting, and storage. Significant advances including commercialization in the general area of printed electronics have been based on organic molecular electronics. Still some fundamental challenges remain: thermal instability, modest charge transport characteristics, and limited lithographic resolution. In the last decade, one-dimensional nanotubes and nanowires, like carbon nanotubes and silicon nanowires, followed by two-dimensional materials, like graphene and transitional dichalcogenide materials, have shown interesting promise as next-generation printed electronic materials. Challenges, such as non-uniformity in growth, limited scalability, and integration issues, need to be resolved for the viable application of these materials to technology. Recently, the concept of printed high-performance complementary metal\\\\text-oxide semiconductor electronics has also emerged and been proven successful for application to electronics. Here, we review progress in CMOS technology and applications, including challenges faced and opportunities revealed.

Printed Graphene Derivative Circuits as Passive Electrical Filters

Directory of Open Access Journals (Sweden)

Dogan Sinar

2018-02-01

Full Text Available The objective of this study is to inkjet print resistor-capacitor (RC low pass electrical filters, using a novel water-based cellulose graphene ink, and compare the voltage-frequency and transient behavior to equivalent circuits constructed from discrete passive components. The synthesized non-toxic graphene-carboxymethyl cellulose (G-CMC ink is deposited on mechanically flexible polyimide substrates using a customized printer that dispenses functionalized aqueous solutions. The design of the printed first-order and second-order low-pass RC filters incorporate resistive traces and interdigitated capacitors. Low pass filter characteristics, such as time constant, cut-off frequency and roll-off rate, are determined for comparative analysis. Experiments demonstrate that for low frequency applications (<100 kHz the printed graphene derivative circuits performed as well as the circuits constructed from discrete resistors and capacitors for both low pass filter and RC integrator applications. The impact of mechanical stress due to bending on the electrical performance of the flexible printed circuits is also investigated.

Selecting Full-Text Undergraduate Periodicals Databases.

Science.gov (United States)

Still, Julie M.; Kassabian, Vibiana

1999-01-01

Examines how libraries and librarians can compare full-text general periodical indices, using ProQuest Direct, Periodical Abstracts (via Ovid), and EBSCOhost as examples. Explores breadth and depth of coverage; manipulation of results (email/download/print); ease of use (searching); and indexing quirks. (AEF)

A high speed electrohydrodynamic (EHD) jet printing method for line printing

International Nuclear Information System (INIS)

Phung, Thanh Huy; Kim, Seora; Kwon, Kye-Si

2017-01-01

Electrohydrodynamic (EHD) jet printing has drawn attention due to its capability to produce smaller dots and patterns with finer lines when compared to those obtained from using conventional inkjet printing. Previous studies have suggested that drop-on-demand EHD-patterning applications should be limited to very slow printing cases with speeds far less than 10 mm s −1 due to the small dot size and limited jetting frequency. In this study, a new EHD printing method is proposed to significantly increase the line-patterning printing speed by modifying the ink and thereby changing the relic shape. The proposed method has the additional advantage of reducing the line-pattern width. The results of the experiment show that the pattern width could be reduced from 20 µ m to 4 µ m by increasing the printing speed from 10 mm s −1 to 50 mm s −1 , respectively. (paper)

The role and impact of 3D printing technologies in casting

Directory of Open Access Journals (Sweden)

Jin-wu Kang

2017-05-01

Full Text Available 3D printing is such a magical technology that it extends into almost every sector relating to manufacturing, not to mention casting production. In this paper, the past, present and future of 3D printing in the foundry sector are profoundly reviewed. 3D printing has the potential to supplement or partially replace the casting method. Today, some castings can be directly printed by metal powders, for example, titanium alloys, nickel alloys and steel parts. Meanwhile, 3D printing has found an unique position in other casting aspects as well, such as printing the wax pattern, ceramic shell, sand core, sand mould, etc. Most importantly, 3D printing is not just a manufacturing method, it will also revolutionize the design of products, assemblies and parts, such as castings, patterns, cores, moulds and shells in casting production. The solid structure of castings and moulds will be redesigned in future into truss or spatially open and skeleton structures. This kind of revolution is just sprouting, but it will bring unimaginable impact on manufacturing including casting production. Nobody doubts the potential of 3D printing technologies in manufacturing, but they do have limitations and drawbacks.

Recent Advances in Biomaterials for 3D Printing and Tissue Engineering

Directory of Open Access Journals (Sweden)

Udayabhanu Jammalamadaka

2018-03-01

Full Text Available Three-dimensional printing has significant potential as a fabrication method in creating scaffolds for tissue engineering. The applications of 3D printing in the field of regenerative medicine and tissue engineering are limited by the variety of biomaterials that can be used in this technology. Many researchers have developed novel biomaterials and compositions to enable their use in 3D printing methods. The advantages of fabricating scaffolds using 3D printing are numerous, including the ability to create complex geometries, porosities, co-culture of multiple cells, and incorporate growth factors. In this review, recently-developed biomaterials for different tissues are discussed. Biomaterials used in 3D printing are categorized into ceramics, polymers, and composites. Due to the nature of 3D printing methods, most of the ceramics are combined with polymers to enhance their printability. Polymer-based biomaterials are 3D printed mostly using extrusion-based printing and have a broader range of applications in regenerative medicine. The goal of tissue engineering is to fabricate functional and viable organs and, to achieve this, multiple biomaterials and fabrication methods need to be researched.

Special Issue: NextGen Materials for 3D Printing

Directory of Open Access Journals (Sweden)

Chee Kai Chua

2018-04-01

Full Text Available Only a handful of materials are well-established in three-dimensional (3D printing and well-accepted in industrial manufacturing applications. However, recent advances in 3D printable materials have shown potential for enabling numerous novel applications in the future. This special issue, consisting of 2 reviews and 10 research articles, intends to explore the possible materials that could define next-generation 3D printing.

Engraving Print Classification

International Nuclear Information System (INIS)

Hoelck, Daniel; Barbe, Joaquim

2008-01-01

A print is a mark, or drawing, made in or upon a plate, stone, woodblock or other material which is cover with ink and then is press usually into a paper reproducing the image on the paper. Engraving prints usually are image composed of a group of binary lines, specially those are made with relief and intaglio techniques. Varying the number and the orientation of lines, the drawing of the engraving print is conformed. For this reason we propose an application based on image processing methods to classify engraving prints

Mortars for 3D printing

Directory of Open Access Journals (Sweden)

Demyanenko Olga

2018-01-01

Full Text Available The paper is aimed at developing scientifically proven compositions of mortars for 3D printing modified by a peat-based admixture with improved operational characteristics. The paper outlines the results of experimental research on hardened cement paste and concrete mixture with the use of modifying admixture MT-600 (thermally modified peat. It is found that strength of hardened cement paste increases at early age when using finely dispersed admixtures, which is the key factor for formation of construction and technical specifications of concrete for 3D printing technologies. The composition of new formations of hardened cement paste modified by MT-600 admixture were obtained, which enabled to suggest the possibility of their physico-chemical interaction while hardening.

Late Print Culture’s Social Media Revolution: Authorship, Collaboration and Copy Machines

Directory of Open Access Journals (Sweden)

Kate Eichhorn

2013-05-01

Full Text Available This article examines the impact of copy machines on late twentieth-century print cultures. Specifically, this article makes a case for “dry copying,” the method of print reproduction perfected by Xerox in the late 1950s, as a unique medium rather than a weak imitation of other printing methods. Following the claim that the widespread availability of copy machines in the late twentieth century represented the arrival of a new medium, this article further examines how understandings of authorship, established with print culture, came undone in the era of the copy machine. Finally, this paper makes a case for understanding copy machines as a form of “social media” that opened up opportunities for writers, readers and publishers to create, share, exchange and comment on texts and images in communities and networks of their own making in the decades preceding the development of the web.

Support-free interior carving for 3D printing

Directory of Open Access Journals (Sweden)

Yue Xie

2017-03-01

Full Text Available Recent interior carving methods for functional design necessitate a cumbersome cut-and-glue process in fabrication. We propose a method to generate interior voids which not only satisfy the functional purposes but are also support-free during the 3D printing process. We introduce a support-free unit structure for voxelization and derive the wall thicknesses parametrization for continuous optimization. We also design a discrete dithering algorithm to ensure the printability of ghost voxels. The interior voids are iteratively carved by alternating the optimization and dithering. We apply our method to optimize the static and rotational stability, and print various results to evaluate the efficacy. Keywords: Interior carving, Support-free, Voxels dithering, Shape optimization, 3D printing

Printing Insecurity? The Security Implications of 3D-Printing of Weapons

OpenAIRE

Walther, Gerald

2014-01-01

In 2013, the first gun printed out of plastic by a 3D-printer was successfully fired in the US. This event caused a major media hype about the dangers of being able to print a gun. Law enforcement agencies worldwide were concerned about this development and the potentially huge security implications of these functional plastic guns. As a result, politicians called for a ban of these weapons and a control of 3D-printing technology. This paper reviews the security implications of 3D-printing te...

Weather resistance of inkjet prints on plastic substrates

Directory of Open Access Journals (Sweden)

Rozália Szentgyörgyvölgyi

2015-06-01

Full Text Available The development of wide format inkjet printers made the technology available for large area commercials. Outdoor advertising uses a wide range of substrate including paperboard, vinyl, canvas, mesh; the material of the substrate itself has to endure the physical and chemical effects of local weather. Weather elements (humidity, wind, solar irradiation degrade printed products inevitably; plastic products have better resistance against them, than paper based substrates. Service life of the printed product for outdoor application is a key parameter from the customer’s point of view. There are two ways to estimate expected lifetime: on site outdoor testing or laboratory testing. In both cases weathering parameters can be monitored, however laboratory testing devices may produce the desired environmental effects and thus accelerate the aging process. Our research objective was to evaluate the effects of artificial weathering on prints produced by inkjet technology on plastic substrates. We used a large format CMYK inkjet printer (Mutoh Rockhopper II, with Epson DX 4 print heads to print our test chart on two similar substrates (PVC coated tarpaulins with grammages 400 g/m2 and 440 g/m2. Specimen were aged in an Atlas Suntest XLS+ material tester device for equal time intervals. We measured and calculated the gradual changes of the optical properties (optical density, tone value, colour shifts of the test prints.

Design of Logistics Route Planning for Printing Enterprises Based on Baidu Map

Directory of Open Access Journals (Sweden)

Da Zhong-Yue

2017-01-01

Full Text Available As traditional printing industry is facing fierce competition in the market and logistics becomes a new sources of growth, the traditional printing enterprises want to build and improve their logistics system. So in this paper, the author has designed the logistics planning system based on the Baidu map development kit. It has the function of route planning and location tracking. This system meet the printing enterprise logistics route planning and tracking demand.

THE ANALYSIS OF PARTICULARITIES AND POSSIBILITIES FOR ENSURING QUALITY IN FLEXO PRINTING

Directory of Open Access Journals (Sweden)

Gabriela Valeria FOLEA

2017-11-01

Full Text Available Training printing workers in the use of flexography requires extensive time, as they are expected to gain knowledge on-site, through hands-on practice, resulting in high costs for the employer. This paper addresses the issue by providing practical information up front. Applying this information correctly during the printing process leads to a quality product. The study was created to analyse the following aspects: problems in printing - nonconformities and defects; quality of the print - seen as a habit of working neatly and correctly; quality when working with die cuts; quality in the prepress process.

3D-PRINTING OF BUILD OBJECTS

Directory of Open Access Journals (Sweden)

SAVYTSKYI M. V.

2016-03-01

Full Text Available Raising of problem. Today, in all spheres of our life we can constate the permanent search for new, modern methods and technologies that meet the principles of sustainable development. New approaches need to be, on the one hand more effective in terms of conservation of exhaustible resources of our planet, have minimal impact on the environment and on the other hand to ensure a higher quality of the final product. Construction is not exception. One of the new promising technology is the technology of 3D -printing of individual structures and buildings in general. 3Dprinting - is the process of real object recreating on the model of 3D. Unlike conventional printer which prints information on a sheet of paper, 3D-printer allows you to display three-dimensional information, i.e. creates certain physical objects. Currently, 3D-printer finds its application in many areas of production: machine building elements, a variety of layouts, interior elements, various items. But due to the fact that this technology is fairly new, it requires the creation of detailed and accurate technologies, efficient equipment and materials, and development of common vocabulary and regulatory framework in this field. Research Aim. The analysis of existing methods of creating physical objects using 3D-printing and the improvement of technology and equipment for the printing of buildings and structures. Conclusion. 3D-printers building is a new generation of equipment for the construction of buildings, structures, and structural elements. A variety of building printing technics opens up wide range of opportunities in the construction industry. At this stage, printers design allows to create low-rise buildings of different configurations with different mortars. The scientific novelty of this work is to develop proposals to improve the thermal insulation properties of constructed 3D-printing objects and technological equipment. The list of key terms and notions of construction

A 3D-Printed Oxygen Control Insert for a 24-Well Plate.

Directory of Open Access Journals (Sweden)

Martin D Brennan

Full Text Available 3D printing has emerged as a method for directly printing complete microfluidic devices, although printing materials have been limited to oxygen-impermeable materials. We demonstrate the addition of gas permeable PDMS (Polydimethylsiloxane membranes to 3D-printed microfluidic devices as a means to enable oxygen control cell culture studies. The incorporation of a 3D-printed device and gas-permeable membranes was demonstrated on a 24-well oxygen control device for standard multiwell plates. The direct printing allows integrated distribution channels and device geometries not possible with traditional planar lithography. With this device, four different oxygen conditions were able to be controlled, and six wells were maintained under each oxygen condition. We demonstrate enhanced transcription of the gene VEGFA (vascular endothelial growth factor A with decreasing oxygen levels in human lung adenocarcinoma cells. This is the first 3D-printed device incorporating gas permeable membranes to facilitate oxygen control in cell culture.

Influence of the surface roughness of coated and uncoated papers on the digital print mottle

Directory of Open Access Journals (Sweden)

Ivana Jurič

2014-07-01

Full Text Available Many factors influence the occurrence of print mottle in prints. In printing process three main components are involved: printing press, substrate and toner. They can be considered as separate components, but in most cases their interaction influences the quality of the print. The goal of this work was to examine the influence of surface roughness of different types of paper (coated and uncoated on print mottle of electrophotographic digital prints. We set up a hypothesis that print mottle will be more apparent on rougher surfaces. In the experimental part we printed four different substrates with different surface properties on electrophotographic printing press. Morphology of the papers surface was analysed using atomic force microscopy (AFM from which surface properties were calculated. For print mottle characterization Gray level co-occurrence matrix (GLCM method was used. Based on the measurements and results we can conclude, contrary to the initial hypothesis, that uncoated papers with rougher surfaces produce smaller print mottle values.

Spectrophotometric Examination of Rough Print Surfaces

Directory of Open Access Journals (Sweden)

Erzsébet Novotny

2011-05-01

Full Text Available The objective was to assess the impact of the surface texture of individual creative paper types (coated or patternedon the quality of printing and to identify to what extent the various creative paper types require specific types ofspectrophotometers. We used stereomicroscopic images to illustrate unprinted and printed surfaces of creative papertypes. Surface roughness was measured to obtain data on the unevenness of surfaces. Spectrophotometric tests wereused to select the most suitable spectrophotometer from meters with different illumination setup for testing anygiven print. For the purpose of testing, we used spectrophotometers which are commonly available generally used totest print products for colour accuracy. With the improvement of measuring geometries, illumination setup, colourmeasurement becomes more and more capable of producing reliable results unaffected by surface textures. Our testshave proved this fact by showing that the GretagMacbeth Spectrolino with annular illumination is less sensitive tosurface texture than the X-Rite Spetrodensitometer and the Techkon SpetroDens with directional illumination. Furthertests have brought us to the conclusion that there is a difference even between the two devices with directionalillumination. While the X-Rite 530 Spectrodensitometer is more suitable for testing coated surfaces, the TechkonSpectroDens can come close to ΔE*ab values produced by the annular illuminated device for textured surfaces.

Effects of the Particle Size and the Solvent in Printing Inks on the Capacitance of Printed Parallel-Plate Capacitors

Directory of Open Access Journals (Sweden)

Sungsik Park

2016-02-01

Full Text Available Parallel-plate capacitors were fabricated using a printed multi-layer structure in order to determine the effects of particle size and solvent on the capacitance. The conductive-dielectric-conductive layers were sequentially spun using commercial inks and by intermediate drying with the aid of a masking polymeric layer. Both optical and scanning electron microscopy were used to characterize the morphology of the printed layers. The measured capacitance was larger than the theoretically calculated value when ink with small-sized particles was used as the top plate. Furthermore, the use of a solvent whose polarity was similar to that of the underlying dielectric layer enhanced the penetration and resulted in an increase in capacitance. The functional resistance-capacitance low-pass filter was implemented using printed resistors and capacitors, a process that may be scalable in the future.

The Effects of Font Type and Spacing of Text for Online Readability and Performance

Science.gov (United States)

Hojjati, Nafiseh; Muniandy, Balakrishnan

2014-01-01

Texts are a group of letters which are printed or displayed in a particular style and size. In the course of the fast speed of technological development everywhere and expanding use of computer based instruction such as online courses, students spend more time on a computer screen than printed media. Texts have been the main element to convey…

Recent Advancements in Liquid Metal Flexible Printed Electronics: Properties, Technologies, and Applications

Directory of Open Access Journals (Sweden)

Xuelin Wang

2016-11-01

Full Text Available This article presents an overview on typical properties, technologies, and applications of liquid metal based flexible printed electronics. The core manufacturing material—room-temperature liquid metal, currently mainly represented by gallium and its alloys with the properties of excellent resistivity, enormous bendability, low adhesion, and large surface tension, was focused on in particular. In addition, a series of recently developed printing technologies spanning from personal electronic circuit printing (direct painting or writing, mechanical system printing, mask layer based printing, high-resolution nanoimprinting, etc. to 3D room temperature liquid metal printing is comprehensively reviewed. Applications of these planar or three-dimensional printing technologies and the related liquid metal alloy inks in making flexible electronics, such as electronical components, health care sensors, and other functional devices were discussed. The significantly different adhesions of liquid metal inks on various substrates under different oxidation degrees, weakness of circuits, difficulty of fabricating high-accuracy devices, and low rate of good product—all of which are challenges faced by current liquid metal flexible printed electronics—are discussed. Prospects for liquid metal flexible printed electronics to develop ending user electronics and more extensive applications in the future are given.

Print mass media: territory of survival

Directory of Open Access Journals (Sweden)

Evgeny V. Akhmadulin

2016-09-01

Full Text Available The article is devoted to the problem of the survival of the print media in the information market in the conditions of intense competition with online journalism and the whole information flow on the Internet. Despite the predictions of the impending death of print periodicals, more than half of the world adult population read a daily newspaper. At the same time, the trends taking place in the media market, confirm the reduction of print media segment in favor of the Internet. According to TNS-Russia data, only in 2013 the Internet audience has grown by 6 %. At the same time the circulation of print media in the US fell by 15 % in 2008- 2014, in Western Europe – by a quarter. In Russia, subscription circulation periodicals in the second half of 2014 fell by 20.2 %, and on the basis of subscription for the first half of 2015, the national average – 22 % (data of Federal State Unitary Enterprise “Russian Post”. Finding ways to stabilize the fall of the print media, many US publishing houses see the transition from advertcentric business model to consumcentric model. It is necessary to use the specifics and advantages of newspapers and magazines (comfort, media planning logic, analytic, continuity and consistency of the content of individual and hypertext editions, and others to maintain the intellectual elite. Print media targeting to an elite audience (willing to pay for exclusiveness allows publishers to offset the rising cost of issuing paperbased, and consumers (subscribers will give a sense of communion to a certain social community, receiving verified and thorough information. In this case, the subscription to a newspaper or magazine (no retail outlet and online will be fashionable factor of association of elite communities and acquire new qualitative features in the development of civil society.

FEM-based Printhead Intelligent Adjusting Method for Printing Conduct Material

Directory of Open Access Journals (Sweden)

Liang Xiaodan

2017-01-01

Full Text Available Ink-jet printing circuit board has some advantage, such as non-contact manufacture, high manufacture accuracy, and low pollution and so on. In order to improve the and printing precision, the finite element technology is adopted to model the piezoelectric print heads, and a new bacteria foraging algorithm with a lifecycle strategy is proposed to optimize the parameters of driving waveforms for getting the desired droplet characteristics. Results of numerical simulation show such algorithm has a good performance. Additionally, the droplet jetting simulation results and measured results confirmed such method precisely gets the desired droplet characteristics.

Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing

International Nuclear Information System (INIS)

Lorber, Barbara; Martin, Keith R; Hsiao, Wen-Kai; Hutchings, Ian M

2014-01-01

We have investigated whether inkjet printing technology can be extended to print cells of the adult rat central nervous system (CNS), retinal ganglion cells (RGC) and glia, and the effects on survival and growth of these cells in culture, which is an important step in the development of tissue grafts for regenerative medicine, and may aid in the cure of blindness. We observed that RGC and glia can be successfully printed using a piezoelectric printer. Whilst inkjet printing reduced the cell population due to sedimentation within the printing system, imaging of the printhead nozzle, which is the area where the cells experience the greatest shear stress and rate, confirmed that there was no evidence of destruction or even significant distortion of the cells during jet ejection and drop formation. Importantly, the viability of the cells was not affected by the printing process. When we cultured the same number of printed and non-printed RGC/glial cells, there was no significant difference in cell survival and RGC neurite outgrowth. In addition, use of a glial substrate significantly increased RGC neurite outgrowth, and this effect was retained when the cells had been printed. In conclusion, printing of RGC and glia using a piezoelectric printhead does not adversely affect viability and survival/growth of the cells in culture. Importantly, printed glial cells retain their growth-promoting properties when used as a substrate, opening new avenues for printed CNS grafts in regenerative medicine. (paper)

A comparison of lip prints between Aryans-Dravidians and Mongols

Directory of Open Access Journals (Sweden)

Prathibha Prasad

2011-01-01

Full Text Available Context: Lip prints are very useful in forensic investigation and personal identification. Like finger prints, even lip prints can be instrumental in identifying a person positively. Aims: Indians are closer to Mongoloids than to Caucasoids or Negroids as indicated by the phylogenetic tree. Most of the studies on lip prints are done in their own population. We have compared lip prints of Manipuris with other Indians (Aryans and Dravidians who are both close to Mongoloid race and are genetically similar. Materials and Methods: A total of 100 students 50 males and 50 females were selected of whom 30 males and 30 females were of Aryan and Dravidian features and 20 males and 20 females showed the Mongol features. Study materials used were Red colored lipstick, Lip brush, Cellophane tape, White chart paper and Magnifying lens. The lip prints were analyzed by dividing them into eight compartments. Results: Analysis of lip prints showed that the most common and the least common pattern in both males and females (Aryans-Dravidians and Mongols were the same, but the compartment wise distribution of the lip patterns was different. Conclusion: In the present study, it is established that there is no similarity of lip prints from one individual to another individual and between males and females. Regarding the comparison with Mongols, more studies with a larger sample size is necessary.

Collaboratively Teaching and Doing History: Promoting Historical Research in the 21st Century

Science.gov (United States)

Carey, Elaine; Pun, Raymond

2016-01-01

A collaborative course introduced history students to a variety of digital tools and printed materials for historical research. The authors explore the development of this program by a historian and a librarian as a case study to address the value of teaching history outside of the classroom and allowing students to conduct research on-site. This…

Review of 3D Printed Millimeter-Wave and Terahertz Passive Devices

Directory of Open Access Journals (Sweden)

Bing Zhang

2017-01-01

Full Text Available The 3D printing technology is catching attention nowadays. It has certain advantages over the traditional fabrication processes. We give a chronical review of the 3D printing technology from the time it was invented. This technology has also been used to fabricate millimeter-wave (mmWave and terahertz (THz passive devices. Though promising results have been demonstrated, the challenge lies in the fabrication tolerance improvement such as dimensional tolerance and surface roughness. We propose the design methodology of high order device to circumvent the dimensional tolerance and suggest specific modelling of the surface roughness of 3D printed devices. It is believed that, with the improvement of the 3D printing technology and related subjects in material science and mechanical engineering, the 3D printing technology will become mainstream for mmWave and THz passive device fabrication.

Script-independent text line segmentation in freestyle handwritten documents.

Science.gov (United States)

Li, Yi; Zheng, Yefeng; Doermann, David; Jaeger, Stefan; Li, Yi

2008-08-01

Text line segmentation in freestyle handwritten documents remains an open document analysis problem. Curvilinear text lines and small gaps between neighboring text lines present a challenge to algorithms developed for machine printed or hand-printed documents. In this paper, we propose a novel approach based on density estimation and a state-of-the-art image segmentation technique, the level set method. From an input document image, we estimate a probability map, where each element represents the probability that the underlying pixel belongs to a text line. The level set method is then exploited to determine the boundary of neighboring text lines by evolving an initial estimate. Unlike connected component based methods ( [1], [2] for example), the proposed algorithm does not use any script-specific knowledge. Extensive quantitative experiments on freestyle handwritten documents with diverse scripts, such as Arabic, Chinese, Korean, and Hindi, demonstrate that our algorithm consistently outperforms previous methods [1]-[3]. Further experiments show the proposed algorithm is robust to scale change, rotation, and noise.

Advances in Home Photo Printing

Institute of Scientific and Technical Information of China (English)

Qian Lin; Brian Atkins; Huitao Luo

2004-01-01

With digital camera adoptions going main stream, consumers capture a record number of photos.Currently, the majority of the digital photos are printed at home. One of the key enablers of this transformation is the advancement of home photo printing technologies. In the past few years, inkjet printing technologies have continued to deliver smaller drop size, larger number of inks, and longer-lasting prints. In the mean time, advanced image processing automatically enhances captured digital photos while being printed. The combination of the above two forces has closed the gap between the home photo prints and AgX prints. It will give an overview of the home photo printing market and technology trends, and discuss major advancements in automatic image processing.

Printed Electronics

Science.gov (United States)

Korkut, Sibel (Inventor); Chiang, Katherine S. (Inventor); Crain, John M. (Inventor); Aksay, Ilhan A. (Inventor); Lettow, John S. (Inventor); Chen, Chuan-Hua (Inventor); Prud'Homme, Robert K. (Inventor)

2018-01-01

Printed electronic device comprising a substrate onto at least one surface of which has been applied a layer of an electrically conductive ink comprising functionalized graphene sheets and at least one binder. A method of preparing printed electronic devices is further disclosed.

Printing activity of the Metropolitan Gavriil Banulescu Bodoni

Directory of Open Access Journals (Sweden)

Nicolae Fustei

2013-07-01

Full Text Available The present study is dedicated to the printing activity of the Metropolitan Gavriil Bănulescu-Bodoni’s activity. The religious and secular prints made from Chisinau’s Diocesan typography by Metropolitan Gavriil promote the idea of national unity of people from Moldavia, Wallachia and Transylvania. Due to the new documents from archives, more evidences and „more light” are being spread over the activity of famous hierarch, whose life is linked with the history of culture of three nations – Romanians, Ukrainians and Russians.

Printing quality control automation

Science.gov (United States)

Trapeznikova, O. V.

2018-04-01

One of the most important problems in the concept of standardizing the process of offset printing is the control the quality rating of printing and its automation. To solve the problem, a software has been developed taking into account the specifics of printing system components and the behavior in printing process. In order to characterize the distribution of ink layer on the printed substrate the so-called deviation of the ink layer thickness on the sheet from nominal surface is suggested. The geometric data construction the surface projections of the color gamut bodies allows to visualize the color reproduction gamut of printing systems in brightness ranges and specific color sectors, that provides a qualitative comparison of the system by the reproduction of individual colors in a varying ranges of brightness.

“Keeping Solid Memoirs About the Performed Exploits”: a Case for the Caucasus Military-Historical Department’s Role in the Establishment of the Regimental Historiography in the Late XIX c

Directory of Open Access Journals (Sweden)

Tatyana A. Kolosovskay

2015-03-01

Full Text Available The aim of this paper is to consider the experience of saving the military sector of the historical memory. It is particularly concern with the issue of the foundation of so-called ―regimental historiography‖ – a corpus of investigations, performed by the militaries about their regiment’s deeds. The article attempts to bring in a number of general questions, related to the history of the troops of the Caucasus Army of the XIX c. The investigation is devoted specifically to the role of the Military-Historical department of the Caucasus Military District General Stuff. The research is based on either newspapers (as the ―Caucasus Journal‖ or primary sources, collected in Federal and regional archives with a particular focus on published ―regimental histories‖ of certain troops. Based on the approach offered by research direction of the ―intellectual history‖, the author came to the conclusions, that all regiment histories were written by non-professional historians. Their historical plot was determined by the official ideological background and by the wish for keeping the memory about the war exploits and traditions of their regiment. The work existence depended not only on the author subjective will, but either on financial issues – money need for the papers printing. The Caucasus Military-Historical department’s participation in this process allowed achieving extremely high results. Many printed and edited papers contained much more than making the dry roll-call of battles and military events. They included either reviews of political, historical, cultural and ethnological context, making some shift to mastering the base for the further scientific Caucasus studies.

Francis Bacon's New Science: Rhetoric and the Transformative Power of Print.

Science.gov (United States)

Heckel, David

The process of projecting textual models onto the phenomenal world began with the invention of writing and accelerated through the manuscript culture of classical antiquity and the Middle Ages into the age of print. In Francis Bacon's work, the book (a metaphor for the phenomenal world) adapted to the demands of the printed text and reflects the…

DIALECTIC HISTORICAL MATERIALISM : CONTRIBUTIONS TO THE CULTURALHISTORICAL THEORY AND THE CRITICAL-HISTORICAL PEDAGOGY

Directory of Open Access Journals (Sweden)

João Junior Bonfim Joia Pereira

2011-12-01

Full Text Available This text presents a study of historical-critical pedagogy and cultural-historical psychology and its goal is to show the theoretical approach that exists between them and their contributions to the school education. This interest appeared as soon as we could see that these two concepts are present in academic publications and productions that discuss school and educational work, however some aspects are still not very clear for the educators who follow this line of thought. So, we organized the text in a way that clarifies that dialectical and historical materialism as a philosophical principle, covers these two theories allowing, in the educational field, they can be adopted as a benchmark for the development of educational work.

Three-dimensional bio-printing.

Science.gov (United States)

Gu, Qi; Hao, Jie; Lu, YangJie; Wang, Liu; Wallace, Gordon G; Zhou, Qi

2015-05-01

Three-dimensional (3D) printing technology has been widely used in various manufacturing operations including automotive, defence and space industries. 3D printing has the advantages of personalization, flexibility and high resolution, and is therefore becoming increasingly visible in the high-tech fields. Three-dimensional bio-printing technology also holds promise for future use in medical applications. At present 3D bio-printing is mainly used for simulating and reconstructing some hard tissues or for preparing drug-delivery systems in the medical area. The fabrication of 3D structures with living cells and bioactive moieties spatially distributed throughout will be realisable. Fabrication of complex tissues and organs is still at the exploratory stage. This review summarize the development of 3D bio-printing and its potential in medical applications, as well as discussing the current challenges faced by 3D bio-printing.

Printing at CERN

CERN Multimedia

Otto, R

2007-01-01

For many years CERN had a very sophisticated print server infrastructure which supported several different protocols (AppleTalk, IPX and TCP/IP) and many different printing standards. Today’s situation differs a lot: we have a much more homogenous network infrastructure, where TCP/IP is used everywhere and we have less printer models, which almost all work using current standards (i.e. they all provide PostScript drivers). This change gave us the possibility to review the printing architecture aiming at simplifying the infrastructure in order to achieve full automation of the service. The new infrastructure offers both: LPD service exposing print queues to Linux and Mac OS X computers and native printing for Windows based clients. The printer driver distribution is automatic and native on Windows and automated by custom mechanisms on Linux, where the appropriate Foomatic drivers are configured. Also the process of printer registration and queue creation is completely automated following the printer regis...

Banned prints in the National and University Library

Directory of Open Access Journals (Sweden)

Rozina Švent

1997-01-01

Full Text Available The article deals with the formation and operation of the D-collection (a special collection of banned prints in the National and University Library (NUL. The functioning of the collection was constantly faced with different complications caused either by legislation or by librarians themselves, due to a too strict adherence to some unwritten rules ("better one more then one less". In the 50-years period, a unique collection of at that tirne banned prints was formed,complemented by over 17000 articles indexed from different periodicals.

Software System for Vocal Rendering of Printed Documents

Directory of Open Access Journals (Sweden)

Marian DARDALA

2008-01-01

Full Text Available The objective of this paper is to present a software system architecture developed to render the printed documents in a vocal form. On the other hand, in the paper are described the software solutions that exist as software components and are necessary for documents processing as well as for multimedia device controlling used by the system. The usefulness of this system is for people with visual disabilities that can access the contents of documents without that they be printed in Braille system or to exist in an audio form.

Reading and Not-Printing: Obstruction at the Crater Press

Directory of Open Access Journals (Sweden)

Richard Parker

2014-11-01

Full Text Available I will begin this paper with a brief and partial history of American printing, detecting a shared predilection for a noticeably maverick relation to the printed page in the works (printed and otherwise of Samuel Keimer and Benjamin Franklin during the colonial period, and the works of Walt Whitman, Emily Dickinson and Mark Twain in the nineteenth-century. I term the interrupted, dialectical printing that connects all of these writer/printers ‘not-printing’, and offer some explanation of his term and a description of some of its manifestations. I will then move on to consider how the idea of ‘not-printing’ might be helpful for the consideration of some contemporary British and American poets and printers before concluding with a description of some of the ways that the productive constraints of such a practice have influenced my own work as editor and printer at the Crater Press.

Streamlined, Inexpensive 3D Printing of the Brain and Skull.

Directory of Open Access Journals (Sweden)

Jason S Naftulin

Full Text Available Neuroimaging technologies such as Magnetic Resonance Imaging (MRI and Computed Tomography (CT collect three-dimensional data (3D that is typically viewed on two-dimensional (2D screens. Actual 3D models, however, allow interaction with real objects such as implantable electrode grids, potentially improving patient specific neurosurgical planning and personalized clinical education. Desktop 3D printers can now produce relatively inexpensive, good quality prints. We describe our process for reliably generating life-sized 3D brain prints from MRIs and 3D skull prints from CTs. We have integrated a standardized, primarily open-source process for 3D printing brains and skulls. We describe how to convert clinical neuroimaging Digital Imaging and Communications in Medicine (DICOM images to stereolithography (STL files, a common 3D object file format that can be sent to 3D printing services. We additionally share how to convert these STL files to machine instruction gcode files, for reliable in-house printing on desktop, open-source 3D printers. We have successfully printed over 19 patient brain hemispheres from 7 patients on two different open-source desktop 3D printers. Each brain hemisphere costs approximately $3-4 in consumable plastic filament as described, and the total process takes 14-17 hours, almost all of which is unsupervised (preprocessing = 4-6 hr; printing = 9-11 hr, post-processing = <30 min. Printing a matching portion of a skull costs $1-5 in consumable plastic filament and takes less than 14 hr, in total. We have developed a streamlined, cost-effective process for 3D printing brain and skull models. We surveyed healthcare providers and patients who confirmed that rapid-prototype patient specific 3D models may help interdisciplinary surgical planning and patient education. The methods we describe can be applied for other clinical, research, and educational purposes.

Aplikasi Campuran Alginat Dari Sargassum Crassifolium Dan Gum Sebagai Pengental Textile Printing

Directory of Open Access Journals (Sweden)

Subaryono Subaryono

2015-12-01

Full Text Available Penelitian aplikasi campuran alginat dari Sargassum crassifolium dan gum untuk meningkatkan viskositas alginat sebagai pengental pada textile printing telah dilakukan. Viskositas campuran alginat dengan guar gum, gum arab, dan locust bean gum diamati pada penyimpanan selama 8 jam. Produk terbaik diujikan sebagai pengental pada textile printing. Campuran alginat dengan guar gum pada perbandingan 90:10 dan 80:20 meningkatkan viskositas dan stabilitas alginat selama penyimpanan. Campuran alginat dengan gum arab dan locust bean gum akan menurunkan viskositas alginat sehingga tidak sesuai untuk aplikasi textile printing. Aplikasi campuran alginat dengan guar gum 90:10 dan 80:20 sebagai pengental pada tekstil printing menghasilkan produk akhir yang setara dengan pengental komersial manutex.

Printing nanotube/nanowire for flexible microsystems

Science.gov (United States)

Tortorich, Ryan P.; Choi, Jin-Woo

2014-04-01

Printing has become an emerging manufacturing technology for mechanics, electronics, and consumer products. Additionally, both nanotubes and nanowires have recently been used as materials for sensors and electrodes due to their unique electrical and mechanical properties. Printed electrodes and conductive traces particularly offer versatility of fabricating low-cost, disposable, and flexible electrical devices and microsystems. While various printing methods such as screen printing have been conventional methods for printing conductive traces and electrodes, inkjet printing has recently attracted great attention due to its unique advantages including no template requirement, rapid printing at low cost, on-demand printing capability, and precise control of the printed material. Computer generated conductive traces or electrode patterns can simply be printed on a thin film substrate with proper conductive ink consisting of nanotubes or nanowires. However, in order to develop nanotube or nanowire ink, there are a few challenges that need to be addressed. The most difficult obstacle to overcome is that of nanotube/nanowire dispersion within a solution. Other challenges include adjusting surface tension and controlling viscosity of the ink as well as treating the surface of the printing substrate. In an attempt to pave the way for nanomaterial inkjet printing, we present a method for preparing carbon nanotube ink as well as its printing technique. A fully printed electrochemical sensor using inkjet-printed carbon nanotube electrodes is also demonstrated as an example of the possibilities for this technology.

Transfer Learning for OCRopus Model Training on Early Printed Books

Directory of Open Access Journals (Sweden)

Christian Reul

2017-12-01

Full Text Available A method is presented that significantly reduces the character error rates for OCR text obtained from OCRopus models trained on early printed books when only small amounts of diplomatic transcriptions are available. This is achieved by building from already existing models during training instead of starting from scratch. To overcome the discrepancies between the set of characters of the pretrained model and the additional ground truth the OCRopus code is adapted to allow for alphabet expansion or reduction. The character set is now capable of flexibly adding and deleting characters from the pretrained alphabet when an existing model is loaded. For our experiments we use a self-trained mixed model on early Latin prints and the two standard OCRopus models on modern English and German Fraktur texts. The evaluation on seven early printed books showed that training from the Latin mixed model reduces the average amount of errors by 43% and 26%, compared to training from scratch with 60 and 150 lines of ground truth, respectively. Furthermore, it is shown that even building from mixed models trained on standard data unrelated to the newly added training and test data can lead to significantly improved recognition results.

Colour changes in prints during long-term dark storage of prints

International Nuclear Information System (INIS)

Parraman, Carinna

2010-01-01

The most significant impact on colour fading in prints is exposure to light and air. However what happens to coloured prints during long-term storage in boxes, drawers and on shelves? Measurements of samples, printed in July 2005, stored in a range of light and darkened storage conditions have shown some interesting initial results. As more emphasis is placed on the effects of light, the dark stability of inkjet prints is relatively overlooked when considering how to preserve or store coloured prints. This study and presentation builds on previous research [1] and has concentrated on the changes to colour during storage. With reference to ASTM F2035 - 00(2006) Standard Practice for Measuring the Dark Stability of Ink Jet Prints, the Standards outline points out that whilst natural aging is the most reliable method of assessing image stability, materials and inks any data that is produced quickly becomes redundant; therefore accelerated aging is more preferred. However, the fine art materials in this study are still very much in circulation. The leading fine art papers, and pigmented ink-sets used in these trials are still being used by artists. We can therefore demonstrate the characteristics of colour changes and the impact of ink on paper that utilises natural aging methods.

Fully Printed Flexible Single-Chip RFID Tag with Light Detection Capabilities

Directory of Open Access Journals (Sweden)

Aniello Falco

2017-03-01

Full Text Available A printed passive radiofrequency identification (RFID tag in the ultra-high frequency band for light and temperature monitoring is presented. The whole tag has been manufactured by printing techniques on a flexible substrate. Antenna and interconnects are realized with silver nanoparticles via inkjet printing. A sprayed photodetector performs the light monitoring, whereas temperature measurement comes from an in-built sensor in the silicon RFID chip. One of the advantages of this system is the digital read-out and transmission of the sensors information on the RFID tag that ensures reliability. Furthermore, the use of printing techniques allows large-scale manufacturing and the direct fabrication of the tag on the desired surface. This work proves for the first time the feasibility of the embedment of large-scale organic photodetectors onto inkjet printed RFID tags. Here, we solve the problem of integration of different manufacturing techniques to develop an optimal final sensor system.

Modification of polymeric materials for 3D printing of external panels of nanosatellites

Directory of Open Access Journals (Sweden)

Isaeva Dariya

2017-01-01

Full Text Available The results of mechanical testing of plastic samples, produced by injection molding and 3D printing are shown. Strength properties of filled and non-filled polymers are compared. The applicability of 3D printing technology with filled polymer materials of external panels is evaluated.

Writing in History: Effects of writing instruction on historical reasoning and text quality

NARCIS (Netherlands)

van Drie, J.; Braaksma, M.; van Boxtel, C.

2015-01-01

This study aims at gaining more insight in effective writing instruction to promote historical reasoning. In an experimental study, two types of instructions were compared; a general writing instruction and a discipline-based writing instruction. In addition, the effects of these instructions for

The influence of surface topography of UV coated and printed cardboard on the print gloss

Directory of Open Access Journals (Sweden)

Igor Karlović

2010-09-01

Full Text Available The incident light on the printed surface undergoes through several processes of scattering, absorbtion and reflectiondepending on the surface topography and structure of the material. The specular part of the surface reflection is commonlyattributed as the geometric component of the reflection, and when measured is associated with specular gloss.The diffuse part of the surface reflection contains the chromatic part of the reflection and is commonly calculatedthrough colorimetric values. Using UV coatings as surface enhacement materials which affect the optical propertiesof coated surfaces and final appearance of the printed product forms new surface topography over the existingone. We have investigated the influence of three different amounts of UV glossy and matte oveprint coating on themeasured specular gloss of printed cardboard samples. The different amount of coatings on the printed samples wereachived using three different screen stencils of 180 threads/cm, 150 threads/cm and 120 threads/cm thread count.The cardboard samples were analysed with AFM and SEM microscopes to obtain surface topography and roughnessvalues which were evaluated with the measured geometric values speficied as instrumental gloss. The surfaceswith a specific amount of UV coatings showed a new formed topography which influences the reflection of light.The changes in topography were evaluated through surface roughness parameters which showed a decline of surfaceroughness with tht additional ammount of glossy and matte coatings. The obtained and calculated correlations showthere is a high correlation between coating ammount and surface roughness change and gloss for the glossy UVcoating. The results for the matte UV coatings showed lower correlation for the gloss and surface roughness.

Applications of Open Source GMAW-Based Metal 3-D Printing

Directory of Open Access Journals (Sweden)

Yuenyong Nilsiam

2018-03-01

Full Text Available The metal 3-D printing market is currently dominated by high-end applications, which make it inaccessible for small and medium enterprises, fab labs, and individual makers who are interested in the ability to prototype and additively manufacture final products in metal. Recent progress led to low-cost open-source metal 3-D printers using a gas metal arc welding (GMAW-based print head. This reduced the cost of metal 3-D printers into the range of desktop prosumer polymer 3-D printers. Consequent research established good material properties of metal 3-D printed parts with readily-available weld filler wire, reusable substrates, thermal and stress properties, toolpath planning, bead-width control, mechanical properties, and support for overhangs. These previous works showed that GMAW-based metal 3-D printing has a good adhesion between layers and is not porous inside the printed parts, but they did not proceed far enough to demonstrate applications. In this study, the utility of the GMAW approach to 3-D printing is investigated using a low-cost open-source metal 3-D printer and a converted Computer Numerical Control router machine to make useful parts over a range of applications including: fixing an existing part by adding a 3-D metal feature, creating a product using the substrate as part of the component, 3-D printing in high resolution of useful objects, near net objects, and making an integrated product using a combination of steel and polymer 3-D printing. The results show that GMAW-based 3-D printing is capable of distributed manufacturing of useful products for a wide variety of applications for sustainable development.

ANALYSIS OF PRINTING PARAMETERS FOR PRODUCTION OF COMPONENTS WITH ​EASY3DMAKER​ PRINTER

Directory of Open Access Journals (Sweden)

Alexander Rengevič

2016-12-01

Full Text Available The presented article deals with analyses and testing appropriate parameters for the production of components manufactured with rapid prototyping technology - Easy3DMaker printer. The quality of the printed component with a specific shape is analyzed. The analyzed materials are ABS Printplus and PLA Printplus. These materials are printed at different temperatures and speeds. combinations of different settings were tested in order to find the best conditions for printing with different nozzles. The quality of individual printed samples is assessed visually and by touch. The efficiency in terms of print time under various conditions was also analyzed. The main benefit of testing is the establishment of appropriate conditions for printing components on a Easy3DMaker printer. The article does not focus on mechanical properties of the examined samples.

3D Printing of Organs-On-Chips

Directory of Open Access Journals (Sweden)

Hee-Gyeong Yi

2017-01-01

Full Text Available Organ-on-a-chip engineering aims to create artificial living organs that mimic the complex and physiological responses of real organs, in order to test drugs by precisely manipulating the cells and their microenvironments. To achieve this, the artificial organs should to be microfabricated with an extracellular matrix (ECM and various types of cells, and should recapitulate morphogenesis, cell differentiation, and functions according to the native organ. A promising strategy is 3D printing, which precisely controls the spatial distribution and layer-by-layer assembly of cells, ECMs, and other biomaterials. Owing to this unique advantage, integration of 3D printing into organ-on-a-chip engineering can facilitate the creation of micro-organs with heterogeneity, a desired 3D cellular arrangement, tissue-specific functions, or even cyclic movement within a microfluidic device. Moreover, fully 3D-printed organs-on-chips more easily incorporate other mechanical and electrical components with the chips, and can be commercialized via automated massive production. Herein, we discuss the recent advances and the potential of 3D cell-printing technology in engineering organs-on-chips, and provides the future perspectives of this technology to establish the highly reliable and useful drug-screening platforms.

Text Mining the History of Medicine.

Science.gov (United States)

Thompson, Paul; Batista-Navarro, Riza Theresa; Kontonatsios, Georgios; Carter, Jacob; Toon, Elizabeth; McNaught, John; Timmermann, Carsten; Worboys, Michael; Ananiadou, Sophia

2016-01-01

Historical text archives constitute a rich and diverse source of information, which is becoming increasingly readily accessible, due to large-scale digitisation efforts. However, it can be difficult for researchers to explore and search such large volumes of data in an efficient manner. Text mining (TM) methods can help, through their ability to recognise various types of semantic information automatically, e.g., instances of concepts (places, medical conditions, drugs, etc.), synonyms/variant forms of concepts, and relationships holding between concepts (which drugs are used to treat which medical conditions, etc.). TM analysis allows search systems to incorporate functionality such as automatic suggestions of synonyms of user-entered query terms, exploration of different concepts mentioned within search results or isolation of documents in which concepts are related in specific ways. However, applying TM methods to historical text can be challenging, according to differences and evolutions in vocabulary, terminology, language structure and style, compared to more modern text. In this article, we present our efforts to overcome the various challenges faced in the semantic analysis of published historical medical text dating back to the mid 19th century. Firstly, we used evidence from diverse historical medical documents from different periods to develop new resources that provide accounts of the multiple, evolving ways in which concepts, their variants and relationships amongst them may be expressed. These resources were employed to support the development of a modular processing pipeline of TM tools for the robust detection of semantic information in historical medical documents with varying characteristics. We applied the pipeline to two large-scale medical document archives covering wide temporal ranges as the basis for the development of a publicly accessible semantically-oriented search system. The novel resources are available for research purposes, while

A 3D-Printed Sensor for Monitoring Biosignals in Small Animals

Directory of Open Access Journals (Sweden)

Sung-Joon Cho

2017-01-01

Full Text Available Although additive manufacturing technologies, also known as 3D printing, were first introduced in the 1980s, they have recently gained remarkable popularity owing to decreased costs. 3D printing has already emerged as a viable technology in many industries; in particular, it is a good replacement for microfabrication technology. Microfabrication technology usually requires expensive clean room equipment and skilled engineers; however, 3D printing can reduce both cost and time dramatically. Although 3D printing technology has started to emerge into microfabrication manufacturing and medical applications, it is typically limited to creating mechanical structures such as hip prosthesis or dental implants. There have been increased interests in wearable devices and the critical part of such wearable devices is the sensing part to detect biosignals noninvasively. In this paper, we have built a 3D-printed sensor that can measure electroencephalogram and electrocardiogram from zebrafish. Despite measuring biosignals noninvasively from zebrafish has been known to be difficult due to that it is an underwater creature, we were able to successfully obtain electrophysiological information using the 3D-printed sensor. This 3D printing technique can accelerate the development of simple noninvasive sensors using affordable equipment and provide an economical solution to physiologists who are unfamiliar with complicated microfabrication techniques.

Color differences and perceptive properties of prints made with microcapsules

Directory of Open Access Journals (Sweden)

Raša Urbas

2015-06-01

Full Text Available The aim of the research was to establish whether addition on fragranced microcapsules influences on color values and perceptive properties of prints. For this purpose, three types of printing inks were used on two sets of the paper substrate. Color properties were measured by standard methods while perceptive properties were determined by subjective method. Research has shown that microcapsules cause small color differences while perceptive analyses gave very interesting results.

The Influence of Print Exposure on the Body-Object Interaction Effect in Visual Word Recognition

Directory of Open Access Journals (Sweden)

Dana eHansen

2012-05-01

Full Text Available We examined the influence of print exposure on the body-object interaction (BOI effect in visual word recognition. High print exposure readers and low print exposure readers either made semantic categorizations (Is the word easily imageable?; Experiment 1 or phonological lexical decisions (Does the item sound like a real English word?; Experiment 2. The results from Experiment 1 showed that there was a larger facilitatory BOI effect for the low print exposure readers than for the high print exposure readers in semantic categorization, though an effect was observed for both print exposure groups. However, the results from Experiment 2 showed that a facilitatory BOI effect was observed only for the high print exposure readers in phonological lexical decision. The results of the present study suggest that print exposure does influence the BOI effect, and that this influence varies as a function of task demands.

Direct microcontact printing of oligonucleotides for biochip applications

Directory of Open Access Journals (Sweden)

Trévisiol E

2005-07-01

Full Text Available Abstract Background A critical step in the fabrication of biochips is the controlled placement of probes molecules on solid surfaces. This is currently performed by sequential deposition of probes on a target surface with split or solid pins. In this article, we present a cost-effective procedure namely microcontact printing using stamps, for a parallel deposition of probes applicable for manufacturing biochips. Results Contrary to a previous work, we showed that the stamps tailored with an elastomeric poly(dimethylsiloxane material did not require any surface modification to be able to adsorb oligonucleotides or PCR products. The adsorbed DNA molecules are subsequently printed efficiently on a target surface with high sub-micron resolution. Secondly, we showed that successive stamping is characterized by an exponential decay of the amount of transferred DNA molecules to the surface up the 4th print, then followed by a second regime of transfer that was dependent on the contact time and which resulted in reduced quality of the features. Thus, while consecutive stamping was possible, this procedure turned out to be less reproducible and more time consuming than simply re-inking the stamps between each print. Thirdly, we showed that the hybridization signals on arrays made by microcontact printing were 5 to 10-times higher than those made by conventional spotting methods. Finally, we demonstrated the validity of this microcontact printing method in manufacturing oligonucleotides arrays for mutations recognition in a yeast gene. Conclusion The microcontact printing can be considered as a new potential technology platform to pattern DNA microarrays that may have significant advantages over the conventional spotting technologies as it is easy to implement, it uses low cost material to make the stamp, and the arrays made by this technology are 10-times more sensitive in term of hybridization signals than those manufactured by conventional spotting

Surface functionalization of 3D-printed plastics via initiated chemical vapor deposition

Directory of Open Access Journals (Sweden)

Christine Cheng

2017-08-01

Full Text Available 3D printing is a useful fabrication technique because it offers design flexibility and rapid prototyping. The ability to functionalize the surfaces of 3D-printed objects allows the bulk properties, such as material strength or printability, to be chosen separately from surface properties, which is critical to expanding the breadth of 3D printing applications. In this work, we studied the ability of the initiated chemical vapor deposition (iCVD process to coat 3D-printed shapes composed of poly(lactic acid and acrylonitrile butadiene styrene. The thermally insulating properties of 3D-printed plastics pose a challenge to the iCVD process due to large thermal gradients along the structures during processing. In this study, processing parameters such as the substrate temperature and the filament temperature were systematically varied to understand how these parameters affect the uniformity of the coatings along the 3D-printed objects. The 3D-printed objects were coated with both hydrophobic and hydrophilic polymers. Contact angle goniometry and X-ray photoelectron spectroscopy were used to characterize the functionalized surfaces. Our results can enable the use of iCVD to functionalize 3D-printed materials for a range of applications such as tissue scaffolds and microfluidics.

Cleaning OCR'd text with Regular Expressions

Directory of Open Access Journals (Sweden)

Laura Turner O'Hara

2013-05-01

Full Text Available Optical Character Recognition (OCR—the conversion of scanned images to machine-encoded text—has proven a godsend for historical research. This process allows texts to be searchable on one hand and more easily parsed and mined on the other. But we’ve all noticed that the OCR for historic texts is far from perfect. Old type faces and formats make for unique OCR. How might we improve poor quality OCR? The answer is Regular Expressions or “regex.”

Gsm 1900Umts Printed Monopole Antenna For Mobile Base Station

Directory of Open Access Journals (Sweden)

Nyi Nyi Lwin

2015-08-01

Full Text Available In this paper printed rectangular monopole antenna which is basically printed microstrip patch antenna with partial ground plane is designed for mobile base station. The substrate FR4 with a relative permittivity of 4.4 and thickness 1.8 is used in design. In addition the printed monopole antenna is of low profile in appearance and suitable for most application. The proposed antenna can cover GSM1900 1850-1990 MHz and UMTS 1920-2170 MHz bands. Design and simulation processes are carried out with the aid of FEKO software which is used for the analysis of electromagnetic problems. Simulation results of the return loss gain and radiation patterns are presented.

Model-based Adjustment of Droplet Characteristic for 3D Electronic Printing

Directory of Open Access Journals (Sweden)

Lin Na

2017-01-01

Full Text Available The major challenge in 3D electronic printing is the print resolution and accuracy. In this paper, a typical mode - lumped element modeling method (LEM - is adopted to simulate the droplet jetting characteristic. This modeling method can quickly get the droplet velocity and volume with a high accuracy. Experimental results show that LEM has a simpler structure with the sufficient simulation and prediction accuracy.

Colour printing techniques

OpenAIRE

Parraman, C.

2017-01-01

Invited chapter in the book Colour Design: Theories and Applications. In PART 3 COLOUR, DESIGN AND COLORATION this chapter covers:\\ud - Hardcopy colour: analogue versus digital\\ud - Colour theory in relation to printing\\ud - Overview of halftoning and digital print technologies\\ud - Overview and development of inks\\ud - Inkjet papers and inks\\ud - Recent and future trends in colour, printing inks and hardware.\\ud \\ud This book differs from other existing books in the field, with the aim of an...

Print and Manuscript

OpenAIRE

Erne, Lukas Christian

2007-01-01

Positioning Shakespeare at the "crossroads of manuscript and print" and exploring what the choice of print or manuscript reveals about the poet's intended audience and the social persona the poet wanted to assume and fashion, argues that "Shakespeare's authorial self-presentation begins as a poet and, more specifically, as a print-published poet" with the publication of Venus and Adonis in 1593 and the allusion to the publication of Rape of Lucrece in the next year. Yet also considers the imp...

Informational Text and the CCSS

Science.gov (United States)

Aspen Institute, 2012

2012-01-01

What constitutes an informational text covers a broad swath of different types of texts. Biographies & memoirs, speeches, opinion pieces & argumentative essays, and historical, scientific or technical accounts of a non-narrative nature are all included in what the Common Core State Standards (CCSS) envisions as informational text. Also included…

Printed Electronics

Science.gov (United States)

Wade, Jessica; Hollis, Joseph Razzell; Wood, Sebastian

2018-04-01

The combination of printing technology with manufacturing electronic devices enables a new paradigm of printable electronics, where 'smart' functionality can be readily incorporated into almost any product at low cost. Over recent decades, rapid progress has been made in this field, which is now emerging into the industrial andcommercial realm. However, successful development and commercialisation on a large scale presents some significant technical challenges. For fully-printable electronic systems, all the component parts must be deposited from solutions (inks), requiring the development of new inorganic, organic and hybrid materials.A variety of traditional printing techniques are being explored and adapted forprinting these new materials in ways that result in the best performing electronicdevices. Whilst printed electronics research has initially focused on traditional typesof electronic device such as light-emitting diodes, transistors, and photovoltaics, it is increasingly apparent that a much wider range of applications can be realised. The soft and stretchable nature of printable materials makes them perfect candidates forbioelectronics, resulting in a wealth of research looking at biocompatible printable inks and biosensors. Regardless of application, the properties of printed electronicmaterials depend on the chemical structures, processing conditions, device architecture,and operational conditions, the complex inter-relationships of which aredriving ongoing research. We focus on three particular 'hot topics', where attention is currently focused: novel materials, characterisation techniques, and device stability. With progress advancing very rapidly, printed electronics is expected to grow over the next decade into a key technology with an enormous economic and social impact.

图示社会：中国大陆纸质媒介的新功能 : 以《新周刊》为例 [Mapping Society: The New Function of Print Media in Mainland China—the Case of New Weekly

Directory of Open Access Journals (Sweden)

Xiaolu Wang

2009-12-01

Full Text Available Based on New Weekly, one of the most influential illustrated Chinese magazines focusing on social issues and phenomena, this paper deals with the new characteristics and functions of the Chinese print media today. By describing its development and cover story themes, I argue that the Chinese print media represented by New Weekly doesn’t simply demonstrate how such media attempts to attract readers by taking advantage of its own changing appearance and format, including its design, printing quality, level of advertisements, classification of themes, and so on. Rather, this media is manifesting a changing concpetualization of intellectuals in China today. The Chinese print media, then, has new characteristics. It no longer serves simply as an ideological ‘microphone’ or ‘mouthpiece,’ but rather observes and comments on social issues and phenomena in mainland China. In this way it reflects the changing conception and perception of intellectuals in its own approaches and perspectives. By tracing this historical development, I attempt to indicate that new media like New Weekly actively promotes consciousness of social issues, while reflecting how such consciousness has an impact on everyday life. Such new cultural functions indicate that the print media is able to play a major role in influencing, if not determining, Chinese public opinion.

Interpolating Spline Curve-Based Perceptual Encryption for 3D Printing Models

Directory of Open Access Journals (Sweden)

Giao N. Pham

2018-02-01

Full Text Available With the development of 3D printing technology, 3D printing has recently been applied to many areas of life including healthcare and the automotive industry. Due to the benefit of 3D printing, 3D printing models are often attacked by hackers and distributed without agreement from the original providers. Furthermore, certain special models and anti-weapon models in 3D printing must be protected against unauthorized users. Therefore, in order to prevent attacks and illegal copying and to ensure that all access is authorized, 3D printing models should be encrypted before being transmitted and stored. A novel perceptual encryption algorithm for 3D printing models for secure storage and transmission is presented in this paper. A facet of 3D printing model is extracted to interpolate a spline curve of degree 2 in three-dimensional space that is determined by three control points, the curvature coefficients of degree 2, and an interpolating vector. Three control points, the curvature coefficients, and interpolating vector of the spline curve of degree 2 are encrypted by a secret key. The encrypted features of the spline curve are then used to obtain the encrypted 3D printing model by inverse interpolation and geometric distortion. The results of experiments and evaluations prove that the entire 3D triangle model is altered and deformed after the perceptual encryption process. The proposed algorithm is responsive to the various formats of 3D printing models. The results of the perceptual encryption process is superior to those of previous methods. The proposed algorithm also provides a better method and more security than previous methods.

Historicity and theology, and the quest for historical Jesus1

Directory of Open Access Journals (Sweden)

P. A. Geyser

1999-12-01

Full Text Available The issue of history and historicity is reviewed in this article. The efforts of New Historicism is brought to bear on this question in an effort to find a way out of the impasse created by the modernist demand for objectivity and the postmodern resignation to radical relativism. The possibility of historiography is explored in conjunction with the pragmatic approach and leads to the conclusion that a kind of historical knowledge is attainable which can be described as useful even if not perfect. The author concurs with Crossan and his working definition of history as the past reconstructed interactively by the present through argued evidence in public discourse. The intersubjective nature of any historical enterprise leads the author to the conclusion that the search for the historical Jesus can only be done in the dialectical approach of a both ... and: both the historical Jesus and the kerygmatic Christ

Thermal Analysis of Braille Formed by Using Screen Printing and Inks with Thermo Powder

Directory of Open Access Journals (Sweden)

Svіtlana HAVENKO

2015-03-01

Full Text Available In order to improve the integration of blind people into society, suitable conditions should be provided for them. The expansion of Braille (BR use could serve the purpose. Depending on the materials used for Braille, it can be formed or printed in different ways: embossing, screen printing, thermoforming, digital printing. The aim of this research is to determine the effect of thermal properties of screen printing inks and inks with thermo-powder on the qualitative parameters of Braille. Screen printing inks and inks with thermo-powder were chosen for the research. Carrying out the qualitative analysis of printouts with Braille, the thermal stability was evaluated by analyzing the thermograms obtained with derivatograph Q-1500. This paper presents the findings of the thermogravimetric (TG, differential thermogravimetric (DTG and differential thermal analysis (DTA of printouts printed on paperboard Plike and using traditional screen printing inks and screen printing inks with thermo-powder. Based on the testing findings it is determined that thermal stability of printouts printed with thermo-powder ink is higher than printed with screen printing inks. It is determined that the appropriate temperature range of screen printing inks with thermo-powder drying is 98 ºC – 198 ºC because in this case better relief of Braille dots is obtained.DOI: http://dx.doi.org/10.5755/j01.ms.21.1.5702

Wear Resistance of 3D Printing Resin Material Opposing Zirconia and Metal Antagonists

Directory of Open Access Journals (Sweden)

Ji-Man Park

2018-06-01

Full Text Available 3D printing offers many advantages in dental prosthesis manufacturing. This study evaluated the wear resistance of 3D printing resin material compared with milling and conventional resin materials. Sixty substrate specimens were prepared with three types of resin materials: 3D printed resin, milled resin, and self-cured resin. The 3D printed specimens were printed at a build angle of 0° and 100 μm layer thickness by digital light processing 3D printing. Two kinds of abraders were made of zirconia and CoCr alloy. The specimens were loaded at 5 kg for 30,000 chewing cycles with vertical and horizontal movements under thermocycling condition. The 3D printed resin did not show significant difference in the maximal depth loss or the volume loss of wear compared to the milled and the self-cured resins. No significant difference was revealed depending on the abraders in the maximal depth loss or the volume loss of wear. In SEM views, the 3D printed resin showed cracks and separation of inter-layer bonds when opposing the metal abrader. The results suggest that the 3D printing using resin materials provides adequate wear resistance for dental use.

Machine Directional Register System Modeling for Shaft-Less Drive Gravure Printing Machines

Directory of Open Access Journals (Sweden)

Shanhui Liu

2013-01-01

Full Text Available In the latest type of gravure printing machines referred to as the shaft-less drive system, each gravure printing roller is driven by an individual servo motor, and all motors are electrically synchronized. The register error is regulated by a speed difference between the adjacent printing rollers. In order to improve the control accuracy of register system, an accurate mathematical model of the register system should be investigated for the latest machines. Therefore, the mathematical model of the machine directional register (MDR system is studied for the multicolor gravure printing machines in this paper. According to the definition of the MDR error, the model is derived, and then it is validated by the numerical simulation and experiments carried out in the experimental setup of the four-color gravure printing machines. The results show that the established MDR system model is accurate and reliable.

Investigation into the Friction and Roughness Properties of Prints Using Conventional and UV Inks

Directory of Open Access Journals (Sweden)

Giedrė Giraitytė

2015-03-01

Full Text Available The article experimentally investigates the properties of offset print friction and determines static and kinetic coeffi­cients of friction. Conventional and UV inks have been found to increase the static friction coefficient and re­duce the kinetic friction coefficient between paper and print. The roughness pro­perties of two different types of paper and prints using conventional and UV inks have been examined and compared thus determining that conventional inks strongly increase the roughness of print surface and that the influence of UV inks depend on the type of paper.

Poetic prayer as a "text in text" in Ukrainian Cyrillic editions of the Baroque age

Directory of Open Access Journals (Sweden)

Kurhanova O.

2016-01-01

Full Text Available The article observes a prayer as a meta-genre of Baroque Ukrainian poetry, found at the pages of Ukrainian Cyrillic religious editions of the late 16th - early 18th centuries. Double nature of baroque poetic prayer is underlined. Poetic prayer originates from the tradition of liturgical prayer and contains it as a "text in text", at the same time poetical prayer is inserted as a "text in text" into the editions, in which it is printed. Two types of semantic connections between baroque poetic prayers and the text of their editions are described. The first type is presented by the poetry, which contains an image of a person, who took part in the text creation and in the process of its edition: the author/editor (in the role of the prayer addresser or the patron of art (in the role of a person, about whom the prayer request was made. The topics of prayer appellations in the poetry of this group are requests for earthly and heavenly boons for the author/editor/patron of the edition, for positive reception of the book; thanksgivings for the help in the book writing/publishing etc. The poetry of the second type contains images, which are central for the text of an edition. These are, as a rule, addressees of the prayer text - God, Saint Virgin, Angels and Saints. The content of a prayer appeal in the poetry of this type is a request for salvation and help in spiritual self-perfection of a lyric hero or a church community. It is defined that the content of poetic prayers, printed at pages of Cyrillic editions of the late 16th - early 18th centuries, was influenced both by text elements of the edition (topic, central images, and by non-textual factors (illustration plot, accompanied by a poem, prayer intention of an author/editor, existence of a patron of edition, different circumstances of editorial process etc.

Cost-estimating for commercial digital printing

Science.gov (United States)

Keif, Malcolm G.

2007-01-01

The purpose of this study is to document current cost-estimating practices used in commercial digital printing. A research study was conducted to determine the use of cost-estimating in commercial digital printing companies. This study answers the questions: 1) What methods are currently being used to estimate digital printing? 2) What is the relationship between estimating and pricing digital printing? 3) To what extent, if at all, do digital printers use full-absorption, all-inclusive hourly rates for estimating? Three different digital printing models were identified: 1) Traditional print providers, who supplement their offset presswork with digital printing for short-run color and versioned commercial print; 2) "Low-touch" print providers, who leverage the power of the Internet to streamline business transactions with digital storefronts; 3) Marketing solutions providers, who see printing less as a discrete manufacturing process and more as a component of a complete marketing campaign. Each model approaches estimating differently. Understanding and predicting costs can be extremely beneficial. Establishing a reliable system to estimate those costs can be somewhat challenging though. Unquestionably, cost-estimating digital printing will increase in relevance in the years ahead, as margins tighten and cost knowledge becomes increasingly more critical.

3D printing in orthognathic surgery − A literature review

Directory of Open Access Journals (Sweden)

Hsiu-Hsia Lin

2018-07-01

Full Text Available With the recent advances in three-dimensional (3D imaging, computer-assisted surgical planning and simulation are now regularly used for analysis of craniofacial structures and improved prediction of surgical outcomes in orthognathic surgery. A variety of patient-specific surgical guides and devices have been designed and manufactured using 3D printing technology, which rapidly gained widespread popularity to improve the outcomes. The article presents an overview of 3D printing technology for state-of-the-art application in orthognathic surgery and discusses the impacts on treatment feasibility and patient outcome. The current available literature regarding the use of 3D printing methods in orthognathic surgery including 3D computer-aided design/computer-aided manufacturing, rapid prototyping, additive manufacturing, 3D printing, 3D printed models, surgical occlusal splints, custom-made guides, templates and fixation plates is reviewed. A Medline, PubMed, ProQuest and ScienceDirect search was performed to find relevant articles over the past 10 years. A total of 318 articles were found, out of which 69 were publications addressing the topic of this study. An additional 9 hand-searched articles were added. From the review, we can conclude that the use of 3D printing methods in orthognathic surgery provide the benefit of optimal functional and aesthetic results, patient satisfaction, and precise translation of the treatment plan. Keywords: Orthognathic surgery, 3D printing, Computer-aided design, Computer-aided manufacturing, Rapid prototyping, Additive manufacturing

Three-Dimensional (3D Printing of Polymer-Metal Hybrid Materials by Fused Deposition Modeling

Directory of Open Access Journals (Sweden)

Susanna Fafenrot

2017-10-01

Full Text Available Fused deposition modeling (FDM is a three-dimensional (3D printing technology that is usually performed with polymers that are molten in a printer nozzle and placed line by line on the printing bed or the previous layer, respectively. Nowadays, hybrid materials combining polymers with functional materials are also commercially available. Especially combinations of polymers with metal particles result in printed objects with interesting optical and mechanical properties. The mechanical properties of objects printed with two of these metal-polymer blends were compared to common poly (lactide acid (PLA printed objects. Tensile tests and bending tests show that hybrid materials mostly containing bronze have significantly reduced mechanical properties. Tensile strengths of the 3D-printed objects were unexpectedly nearly identical with those of the original filaments, indicating sufficient quality of the printing process. Our investigations show that while FDM printing allows for producing objects with mechanical properties similar to the original materials, metal-polymer blends cannot be used for the rapid manufacturing of objects necessitating mechanical strength.

Embedded sensing: integrating sensors in 3-D printed structures

Directory of Open Access Journals (Sweden)

A. Dijkshoorn

2018-03-01

Full Text Available Current additive manufacturing allows for the implementation of electrically interrogated 3-D printed sensors. In this contribution various technologies, sensing principles and applications are discussed. We will give both an overview of some of the sensors presented in literature as well as some of our own recent work on 3-D printed sensors. The 3-D printing methods discussed include fused deposition modelling (FDM, using multi-material printing and poly-jetting. Materials discussed are mainly thermoplastics and include thermoplastic polyurethane (TPU, both un-doped as well as doped with carbon black, polylactic acid (PLA and conductive inks. The sensors discussed are based on biopotential sensing, capacitive sensing and resistive sensing with applications in surface electromyography (sEMG and mechanical and tactile sensing. As these sensors are based on plastics they are in general flexible and therefore open new possibilities for sensing in soft structures, e.g. as used in soft robotics. At the same time they show many of the characteristics of plastics like hysteresis, drift and non-linearity. We will argue that 3-D printing of embedded sensors opens up exciting new possibilities but also that these sensors require us to rethink how to exploit non-ideal sensors.

A Low-Power Integrated Humidity CMOS Sensor by Printing-on-Chip Technology

Directory of Open Access Journals (Sweden)

Chang-Hung Lee

2014-05-01

Full Text Available A low-power, wide-dynamic-range integrated humidity sensing chip is implemented using a printable polymer sensing material with an on-chip pulse-width-modulation interface circuit. By using the inkjet printing technique, poly(3,4-ethylene-dioxythiophene/polystyrene sulfonate that has humidity sensing features can be printed onto the top metal layer of a 0.35 μm CMOS IC. The developed printing-on-chip humidity sensor achieves a heterogeneous three dimensional sensor system-on-chip architecture. The humidity sensing of the implemented printing-on-chip sensor system is experimentally tested. The sensor shows a sensitivity of 0.98% to humidity in the atmosphere. The maximum dynamic range of the readout circuit is 9.8 MΩ, which can be further tuned by the frequency of input signal to fit the requirement of the resistance of printed sensor. The power consumption keeps only 154 μW. This printing-on-chip sensor provides a practical solution to fulfill an ultra-small integrated sensor for the applications in miniaturized sensing systems.

A STUDY OF RELATIVE CORRELATION BETWEEN THE PATTERN OF FINGER PRINTS AND LIP PRINTS

OpenAIRE

Murugan; Karikalan

2014-01-01

BACKGROUND AND OBJECTIVE: The use of conventional methods such as dactylography (study of finger prints) & cheiloscopy (study of lip prints) is of paramount importance, since personal identification by other means such as DNA analysis is sophisticated and not available in rural and developing countries. Fingerprint in its narrow sense is an impression left by the friction ridges of human fingers. The second prints of interest are lip prints. Studies of association between ...

3D-printed patient-specific applications in orthopedics

Directory of Open Access Journals (Sweden)

Wong KC

2016-10-01

Full Text Available Kwok Chuen Wong Department of Orthopedics and Traumatology, Prince of Wales Hospital, The Chinese University of Hong Kong, Shatin, Hong Kong Abstract: With advances in both medical imaging and computer programming, two-dimensional axial images can be processed into other reformatted views (sagittal and coronal and three-dimensional (3D virtual models that represent a patients’ own anatomy. This processed digital information can be analyzed in detail by orthopedic surgeons to perform patient-specific orthopedic procedures. The use of 3D printing is rising and has become more prevalent in medical applications over the last decade as surgeons and researchers are increasingly utilizing the technology’s flexibility in manufacturing objects. 3D printing is a type of manufacturing process in which materials such as plastic or metal are deposited in layers to create a 3D object from a digital model. This additive manufacturing method has the advantage of fabricating objects with complex freeform geometry, which is impossible using traditional subtractive manufacturing methods. Specifically in surgical applications, the 3D printing techniques can not only generate models that give a better understanding of the complex anatomy and pathology of the patients and aid in education and surgical training, but can also produce patient-specific surgical guides or even custom implants that are tailor-made to the surgical requirements. As the clinical workflow of the 3D printing technology continues to evolve, orthopedic surgeons should embrace the latest knowledge of the technology and incorporate it into their clinical practice for patient-specific orthopedic applications. This paper is written to help orthopedic surgeons stay up-to-date on the emerging 3D technology, starting from the acquisition of clinical imaging to 3D printing for patient-specific applications in orthopedics. It 1 presents the necessary steps to prepare the medical images that are

Recent Advances in 3D Printing of Aliphatic Polyesters

Directory of Open Access Journals (Sweden)

Ioana Chiulan

2017-12-01

Full Text Available 3D printing represents a valuable alternative to traditional processing methods, clearly demonstrated by the promising results obtained in the manufacture of various products, such as scaffolds for regenerative medicine, artificial tissues and organs, electronics, components for the automotive industry, art objects and so on. This revolutionary technique showed unique capabilities for fabricating complex structures, with precisely controlled physical characteristics, facile tunable mechanical properties, biological functionality and easily customizable architecture. In this paper, we provide an overview of the main 3D-printing technologies currently employed in the case of poly (lactic acid (PLA and polyhydroxyalkanoates (PHA, two of the most important classes of thermoplastic aliphatic polyesters. Moreover, a short presentation of the main 3D-printing methods is briefly discussed. Both PLA and PHA, in the form of filaments or powder, proved to be suitable for the fabrication of artificial tissue or scaffolds for bone regeneration. The processability of PLA and PHB blends and composites fabricated through different 3D-printing techniques, their final characteristics and targeted applications in bioengineering are thoroughly reviewed.

The power of print reading: comics in the classroom.

Science.gov (United States)

Gabaron, Sabine

2017-09-01

Evidence from neuroscience and psychological studies supporting benefits of print reading over digital reading has recently been discussed in these columns (Perbal 2017 J. Cell Commun. Signal. 11:1-4). In the present commentary, I would like to add my perspective as a Humanities educator, and build upon the idea that print reading results in better comprehension, learning and communication. The argumentation that is presented herein is based on a study performed in a French Comics language class aimed at broadening students' knowledge and experience of graphic novels, and providing them with a cultural representation in the foreign language. The results that are discussed in this commentary indicate that upon reading printed books students created connections for a more meaningful learning experience, leading to personal growth and linguistic development. The impact these graphic novels had on students' learning capacity and relationship to reading was tremendous. The kinesthetic relationship with printed text was deeply enriching and gratifying. The stimulatory effects on their imagination allowed for a more creative reading, and a deeper comprehension, resulting in meaningful communication.

CERN printing infrastructure

International Nuclear Information System (INIS)

Otto, R; Sucik, J

2008-01-01

For many years CERN had a very sophisticated print server infrastructure [13] which supported several different protocols (AppleTalk, IPX and TCP/IP) and many different printing standards. Today's situation differs a lot: we have a much more homogenous network infrastructure, where TCP/IP is used everywhere and we have less printer models, which almost all work using current standards (i.e. they all provide PostScript drivers). This change gave us the possibility to review the printing architecture aiming at simplifying the infrastructure in order to achieve full automation of the service. The new infrastructure offers both: LPD service exposing print queues to Linux and Mac OS X computers and native printing for Windows based clients. The printer driver distribution is automatic and native on Windows and automated by custom mechanisms on Linux, where the appropriate Foomatic drivers are configured. Also the process of printer registration and queue creation is completely automated following the printer registration in the network database. At the end of 2006 we have moved all (∼1200) CERN printers and all users' connections at CERN to the new service. This paper will describe the new architecture and summarize the process of migration

3D-Printing in Congenital Cardiology: From Flatland to Spaceland

Directory of Open Access Journals (Sweden)

Sébastien Deferm

2016-01-01

Full Text Available Medical imaging has changed to a great extent over the past few decades. It has been revolutionized by three-dimensional (3D imaging techniques. Despite much of modern medicine relying on 3D imaging, which can be obtained accurately, we keep on being limited by visualization of the 3D content on two-dimensional flat screens. 3D-printing of graspable models could become a feasible technique to overcome this gap. Therefore, we printed pre- and postoperative 3D-models of a complex congenital heart defect. With this example, we intend to illustrate that these models hold value in preoperative planning, postoperative evaluation of a complex procedure, communication with the patient, and education of trainees. At this moment, 3D printing only leaves a small footprint, but makes already a big impression in the domain of cardiology and cardiovascular surgery. Further studies including more patients and more validated applications are needed to streamline 3D printing in the clinical setting of daily practice.

From medical imaging data to 3D printed anatomical models.

Directory of Open Access Journals (Sweden)

Thore M Bücking

Full Text Available Anatomical models are important training and teaching tools in the clinical environment and are routinely used in medical imaging research. Advances in segmentation algorithms and increased availability of three-dimensional (3D printers have made it possible to create cost-efficient patient-specific models without expert knowledge. We introduce a general workflow that can be used to convert volumetric medical imaging data (as generated by Computer Tomography (CT to 3D printed physical models. This process is broken up into three steps: image segmentation, mesh refinement and 3D printing. To lower the barrier to entry and provide the best options when aiming to 3D print an anatomical model from medical images, we provide an overview of relevant free and open-source image segmentation tools as well as 3D printing technologies. We demonstrate the utility of this streamlined workflow by creating models of ribs, liver, and lung using a Fused Deposition Modelling 3D printer.

‘Une page est une image’: Text as Image in Arts et métiers graphiques

Directory of Open Access Journals (Sweden)

Kristof Van Gansen

2017-12-01

Full Text Available Arts et métiers graphiques (1927–39 was a French graphic arts periodical published by type founder Charles Peignot. It tried to address all aspects of graphic design and the art of the book in articles written by prominent art critics, graphic designers, book historians, and literary authors. These contents were presented curiously: on fine paper with an intricate page layout and multiple fonts, and with offset inserts serving as illustrations or samples of technical innovations such as colour printing, all of which would please the bibliophile readership. Apart from advocating the renaissance of the beau livre and bibliophilism, Arts et métiers graphiques tried to redefine or adjust the traditional view of the literary text. A literary text was not only a thing to be read, it was also a visual and material object, hence the editors’ virtually exclusive focus on material aspects of the books they discussed. In doing so, they wanted to broaden the scope of literary criticism to include such aspects. After a historical overview of the magazine and a discussion of the editors’ views on bibliophilism, this article aims to investigate the visual and material conception of the text in Arts et métiers graphiques.

A relevance theoretic approach to intertextuality in print advertising

African Journals Online (AJOL)

Anonymous vs. acknowledged intertexts: A relevance theoretic approach to intertextuality in print advertising. ... make intertextual references to texts from mass media genres other than advertising as part of an ... AJOL African Journals Online.

Simulation analysis of turbine blade in 3D printing aquarium

Directory of Open Access Journals (Sweden)

Chen Dyi-Cheng

2017-01-01

Full Text Available 3D printing of the flexibility is the most admirable place, no matter when or where, as long as the machine can make the abstract design of finished products or difficult to process the finished product printed out as a sample. And in the product design, through the 3D print out the entity, to more specific observation of the advantages and disadvantages of finished products, which shorten the time of many creative research and development, but also relatively reduce the defective factors. As in recent years, 3D printing technology is progressing, material adhesion, precision and parts of the degree of cooperation has increased, coupled with many parts taking into account the cost, production and other issues, and then let a lot of light load small parts or special parts choose to use 3D to print the finished product to replace. This study focuses on the plastic turbine blades that drive water in the aquarium, but the 3D printing is done by stacking. However, the general stress analysis software can set the material to analyze the deformation results of the force, nor the 3D to analyze the software. Therefore, this study first analyzes the deformation of turbine blade by software, and then verifies the situation of 3D printing turbine blade, and then compares the actual results of software analysis and 3D printing. The results can provide the future of 3D product consider the strength factor. The study found that the spiral blade design allows the force points to be dispersed to avoid hard focus.

Issues in Text Design and Layout for Computer Based Communications.

Science.gov (United States)

Andresen, Lee W.

1991-01-01

Discussion of computer-based communications (CBC) focuses on issues involved with screen design and layout for electronic text, based on experiences with electronic messaging, conferencing, and publishing within the Australian Open Learning Information Network (AOLIN). Recommendations for research on design and layout for printed text are also…

Making PMT halftone prints

Energy Technology Data Exchange (ETDEWEB)

Corey, J.D.

1977-05-01

In the printing process for technical reports presently used at Bendix Kansas City Division, photographs are reproduced by pasting up PMT halftone prints on the artwork originals. These originals are used to make positive-working plastic plates for offset lithography. Instructions for making good-quality halftone prints using Eastman Kodak's PMT materials and processes are given in this report. 14 figures.

Initial Work on the Characterization of Additive Manufacturing (3D Printing Using Software Image Analysis

Directory of Open Access Journals (Sweden)

Jeremy Straub

2015-04-01

Full Text Available A current challenge in additive manufacturing (commonly known as 3D printing is the detection of defects. Detection of defects (or the lack thereof in bespoke industrial manufacturing may be safety critical and reduce or eliminate the need for testing of printed objects. In consumer and prototype printing, early defect detection may facilitate the printer taking corrective measures (or pausing printing and alerting a user, preventing the need to re-print objects after the compounding of a small error occurs. This paper considers one approach to defect detection. It characterizes the efficacy of using a multi-camera system and image processing software to assess printing progress (thus detecting completion failure defects and quality. The potential applications and extrapolations of this type of a system are also discussed.

Use of Electronic Versus Print Textbooks by Chilean Dental Students: A National Survey.

Science.gov (United States)

Aravena, Pedro Christian; Schulz, Karen; Parra, Annemarie; Perez-Rojas, Francisco; Rosas, Cristian; Cartes-Velásquez, Ricardo

2017-03-01

Electronic textbooks have become available in recent decades as replacements or alternatives for print versions. The aim of this descriptive cross-sectional study was to evaluate the use of electronic versus print textbooks by Chilean dental students. The target population was students from 14 Chilean dental schools. The questionnaire was adapted and translated to Spanish from a previous survey used in a similar study. It consisted of the following variables: preferred type, type used, frequency of use, source, electronic devices used to read, and disposal after use. The use of textbooks was analyzed and compared by gender and course (p≤0.05). The final sample consisted of 3,256 students (21.38±2.5 years of age, 50.8% women). Most of the participants reported using both types of texts, with most (63.9%) preferring print over electronic texts, including significantly more women (pelectronic books on a daily basis (47.3%) or at least twice a week (30.7%). The main source of electronic textbooks was the Internet (43.8%). A personal computer was the most widely used device for reading electronic texts (95.0%), followed by a cell phone (46.4%) and a tablet (24.5%). Overall, these Chilean dental students preferred print over electronic textbooks, despite having available electronic devices.

Efficient Design of Flexible and Low Cost Paper-Based Inkjet-Printed Antenna

Directory of Open Access Journals (Sweden)

A. M. Mansour

2015-01-01

Full Text Available A new, efficient, flexible, and cheap antenna designed at 1.57 GHz microstrip patch antenna based on simple inkjet printer with improved performance using silver nanoparticles ink is developed. The antenna is printed on a kind of flexible substrate “glossy paper,” to offer the advantage of light and flexibility for different applications. The performance of silver nanoparticles ink has been studied through inkjet printing versus postsynthesis annealing and multilayer printing. The conductivity has been improved to have promising values up to 2 Ω/cm at temperatures up to 180°C. The surface morphology of the circuits has been analyzed using SEM with mean diameter of the nanoparticles around 100 nm, uniform surface distribution, and mean thickness of the printed layer around 230 microns. Also, a simple design of a coplanar waveguide (CPW monopole Z-shaped antenna has been considered as an application of fabricated printed antenna using the studied silver nanoparticles ink through a cheap printer.

Dynamic Colour Possibilities and Functional Properties of Thermochromic Printing Inks

Directory of Open Access Journals (Sweden)

Rahela Kulcar

2012-07-01

Full Text Available Thermochromic printing inks change their colour regarding the change in temperature and they are one of the major groups of colour-changing inks. One of the most frequently used thermochromic material in printing inks are leuco dyes. The colour of thermochromic prints is dynamic, it is not just temperature-dependent, but it also depends on thermal history. The effect is described by colour hysteresis. This paper aims at discussing general aspects of thermochromic inks, dynamic colorimetric properties of leuco dye-based thermochromic inks, their stability and principle of variable-temperature colour measurement. Thermochromic material is protected in round-shaped capsules. They are much larger than pigments in conventional inks. The polymer envelopes of pigment capsules are more stable against oxidation than the binder. If these envelopes are damaged, the dynamic colour is irreversibly lost. Our aim is to analyse the colorimetric properties of several reversible screen-printed UV-curing leuco dye thermochromic inks with different activation temperatures printed on paper. A small analysis of irreversible thermochromic inks will be presented for comparison with reversible thermochromic inks. Moreover, so as to show interesting possibilities, a combination of different inks was made, an irreversible thermochromic ink was printed on top of the red and blue reversible thermochromic inks. Special attention was given to the characterization of colour hysteresis and the meaning of activation temperature.

Texte, intertexte et iconotexte dans le message publicitaire

Directory of Open Access Journals (Sweden)

I. C. CORJAN

2007-12-01

Full Text Available The paper states the fact that although the roles of the text and of the image in an advertisement are dynamic and appear in variable proportions depending on numerous criteria, they are also beautifully balanced, especially if compared from a functional point of view, determining and depending upon each other in a coherent discursive unity. Between text and image there are usually the following relations of reciprocity: support (argumentation, redundancy, paraphrase; complementarity (in-formation that is autonomous in form, but convergent in content; rhetorical amplification (meaning transfer, metaphorisation, hyperbolisation etc.; opposition (antithesis, exaggeration, non-antagonistic contradiction etc.. In general, both the verbal and the iconic develop, much to their mutual advantage, an extra meaning which the former establishes linguistically, and the latter exaggerates visually. In this case, however, the image always goes beyond the verbal information, thanks to its deep-rooted polysemy. Thus, in the special case of printed advertising, there are a few prevalent icono-textual structures, with obvious intertextual and paratextual functions: intertextuality of the writ-ten text; figurative iconic intertextuality; icono-textual intertextuality; double intertextuality: verbal-written and icono-textual. The end of the study puts forward a new formulation of the icono-text and of the typology of printed advertising included in written media and indoor/ outdoor posting.

The NIH 3D Print Exchange: A Public Resource for Bioscientific and Biomedical 3D Prints.

Science.gov (United States)

Coakley, Meghan F; Hurt, Darrell E; Weber, Nick; Mtingwa, Makazi; Fincher, Erin C; Alekseyev, Vsevelod; Chen, David T; Yun, Alvin; Gizaw, Metasebia; Swan, Jeremy; Yoo, Terry S; Huyen, Yentram

2014-09-01

The National Institutes of Health (NIH) has launched the NIH 3D Print Exchange, an online portal for discovering and creating bioscientifically relevant 3D models suitable for 3D printing, to provide both researchers and educators with a trusted source to discover accurate and informative models. There are a number of online resources for 3D prints, but there is a paucity of scientific models, and the expertise required to generate and validate such models remains a barrier. The NIH 3D Print Exchange fills this gap by providing novel, web-based tools that empower users with the ability to create ready-to-print 3D files from molecular structure data, microscopy image stacks, and computed tomography scan data. The NIH 3D Print Exchange facilitates open data sharing in a community-driven environment, and also includes various interactive features, as well as information and tutorials on 3D modeling software. As the first government-sponsored website dedicated to 3D printing, the NIH 3D Print Exchange is an important step forward to bringing 3D printing to the mainstream for scientific research and education.

Nursing Research Using Historical Methods: Qualitative Designs and Methods in Nursing Mary de Chesnay Nursing Research Using Historical Methods: Qualitative Designs and Methods in Nursing 236pp £65.95 Springer 9780826126177 0826126170 [Formula: see text].

Science.gov (United States)

2016-11-18

Just as the present can be understood by examining the past, the use of historical research methods can help nurses to understand the present to influence the future. This text emphasises how this approach to nursing research can provide a contextual framework from which nurses can consider their own practice.

The Implications of the Appearance of the Printing Activity in the Romanian Space

Directory of Open Access Journals (Sweden)

Agnes Erich

2006-01-01

Full Text Available In the general context of the Cyrillic European print, the print from Wallachia is placed to leader place, reflecting a high cultural degree of development, a level and a tradition which is worth a special attention. A fact of culture, as the establishment of the typography, can't be studied apart from the society needs from that time. The appearance of Cyrillic print in Wallachia constituted a part of an European phenomenon, the reflect of it on the local plan and not at all an singular appearance, broken by the European culture.

3D Printing Technologies for Flexible Tactile Sensors toward Wearable Electronics and Electronic Skin

Directory of Open Access Journals (Sweden)

Changyong Liu

2018-06-01

Full Text Available 3D printing has attracted a lot of attention in recent years. Over the past three decades, various 3D printing technologies have been developed including photopolymerization-based, materials extrusion-based, sheet lamination-based, binder jetting-based, power bed fusion-based and direct energy deposition-based processes. 3D printing offers unparalleled flexibility and simplicity in the fabrication of highly complex 3D objects. Tactile sensors that emulate human tactile perceptions are used to translate mechanical signals such as force, pressure, strain, shear, torsion, bend, vibration, etc. into electrical signals and play a crucial role toward the realization of wearable electronics and electronic skin. To date, many types of 3D printing technologies have been applied in the manufacturing of various types of tactile sensors including piezoresistive, capacitive and piezoelectric sensors. This review attempts to summarize the current state-of-the-art 3D printing technologies and their applications in tactile sensors for wearable electronics and electronic skin. The applications are categorized into five aspects: 3D-printed molds for microstructuring substrate, electrodes and sensing element; 3D-printed flexible sensor substrate and sensor body for tactile sensors; 3D-printed sensing element; 3D-printed flexible and stretchable electrodes for tactile sensors; and fully 3D-printed tactile sensors. Latest advances in the fabrication of tactile sensors by 3D printing are reviewed and the advantages and limitations of various 3D printing technologies and printable materials are discussed. Finally, future development of 3D-printed tactile sensors is discussed.

Generative Learning Strategy Use and Self-Regulatory Prompting in Digital Text

Science.gov (United States)

Reid, Alan J.; Morrison, Gary M.

2014-01-01

The digital revolution is shifting print-based textbooks to digital text, and it has afforded the opportunity to incorporate meaningful learning strategies and otherwise separate metacognitive activities directly into these texts as embedded support. A sample of 89 undergraduates read a digital, expository text on the basics of photography. The…

CERN printing infrastructure

Energy Technology Data Exchange (ETDEWEB)

Otto, R; Sucik, J [CERN, Geneva (Switzerland)], E-mail: Rafal.Otto@cern.ch, E-mail: Juraj.Sucik@cern.ch

2008-07-15

For many years CERN had a very sophisticated print server infrastructure [13] which supported several different protocols (AppleTalk, IPX and TCP/IP) and many different printing standards. Today's situation differs a lot: we have a much more homogenous network infrastructure, where TCP/IP is used everywhere and we have less printer models, which almost all work using current standards (i.e. they all provide PostScript drivers). This change gave us the possibility to review the printing architecture aiming at simplifying the infrastructure in order to achieve full automation of the service. The new infrastructure offers both: LPD service exposing print queues to Linux and Mac OS X computers and native printing for Windows based clients. The printer driver distribution is automatic and native on Windows and automated by custom mechanisms on Linux, where the appropriate Foomatic drivers are configured. Also the process of printer registration and queue creation is completely automated following the printer registration in the network database. At the end of 2006 we have moved all ({approx}1200) CERN printers and all users' connections at CERN to the new service. This paper will describe the new architecture and summarize the process of migration.

Drug-printing by flexographic printing technology--a new manufacturing process for orodispersible films.

Science.gov (United States)

Janssen, Eva Maria; Schliephacke, Ralf; Breitenbach, Armin; Breitkreutz, Jörg

2013-01-30

Orodispersible films (ODFs) are intended to disintegrate within seconds when placed onto the tongue. The common way of manufacturing is the solvent casting method. Flexographic printing on drug-free ODFs is introduced as a highly flexible and cost-effective alternative manufacturing method in this study. Rasagiline mesylate and tadalafil were used as model drugs. Printing of rasagiline solutions and tadalafil suspensions was feasible. Up to four printing cycles were performed. The possibility to employ several printing cycles enables a continuous, highly flexible manufacturing process, for example for individualised medicine. The obtained ODFs were characterised regarding their mechanical properties, their disintegration time, API crystallinity and homogeneity. Rasagiline mesylate did not recrystallise after the printing process. Relevant film properties were not affected by printing. Results were comparable to the results of ODFs manufactured with the common solvent casting technique, but the APIs are less stressed through mixing, solvent evaporation and heat. Further, loss of material due to cutting jumbo and daughter rolls can be reduced. Therefore, a versatile new manufacturing technology particularly for processing high-potent low-dose or heat sensitive drugs is introduced in this study. Copyright © 2012 Elsevier B.V. All rights reserved.

The best printing methods to print satellite images

OpenAIRE

G.A. Yousif; R.Sh. Mohamed

2011-01-01

Printing systems operate in general as a system of color its color scale is limited as compared with the system color satellite images. Satellite image is building from very small cell named pixel, which represents the picture element and the unity of color when the image is displayed on the screen, this unit becomes lesser in size and called screen point. This unit posseses different size and shape from the method of printing to another, depending on the output resolution, tools and material...

Online press: The relations between the content in print and online editions of daily newspapers

Directory of Open Access Journals (Sweden)

Bajić Predrag

2017-01-01

Full Text Available The purpose of this article is to observe the connection between the same content in the print editions of daily newspapers in Serbia and on their web portals, i.e. the changes that occur in the digital world as compared to the 'static' content that can be seen on paper (text and photos. In the digital era, the newspapers is struggling to retain considerable influence and manages to do so through synchronization, promotion and transfer of media contents from one platform to another. At present, we see the attempts to maintain exclusivity of content in newspapers, as much as possible, just by promoting it on a web portal (through a single photograph or some previews of the whole text. They serve as 'bait' in an effort to increase interest for buying the newspapers. Also, unlike the situation with the print, the placement of the same contents on portals can be enriched by adding multimedia elements. There we encounter a 'paradox', i.e. the fact that on the internet, where space is practically unlimited, we have a shortening of the textual parts due to the explications that can be obtained through multimedia contents and links. On the other hand, that is impossible in the case of print, where a longer text is required, although there are clear spatial limitations. No matter the advantages of multimedia enrichments, there we also find a distinctive 'trap', in terms that there is a possibility that the content disappears. With print, where we do not have 'half-finished' product and the contents cannot change once printed, there is no such risk. Further, the digital age gave the print media a possibility to generate, transmit and distribute exclusive audio-visual content.

MolPrint3D: Enhanced 3D Printing of Ball-and-Stick Molecular Models

Science.gov (United States)

Paukstelis, Paul J.

2018-01-01

The increased availability of noncommercial 3D printers has provided instructors and students improved access to printing technology. However, printing complex ball-and-stick molecular structures faces distinct challenges, including the need for support structures that increase with molecular complexity. MolPrint3D is a software add-on for the…

Antiquarian books as source of environment historical water data.

Science.gov (United States)

Schram, Jürgen; Schneider, Mario; Horst, Rasmus; Thieme, Hagen

2009-05-01

Historical environment considerations are inevitable also for modern environmental analysis. They alone allow evaluation of anthropogenic impact into the environment. To receive information about the historical environment situation in inhabited regions, we approached this task by examining historical well dated and locatable products of the Homo faber. The work introduced here uses books as a source of environment historical data specially for the environmental compartment of water. The paper of historical books, dated by their printing and allocated by their watermark(1) (Wasserzeichensammlung Piccard, Piccard online, Hauptstaatsarchiv Stuttgart, ) is a trap for traces of heavy metals contaminating their production water in historical times. Great amounts of water were brought into contact with the paper pulp in the historical paper mill process. The cellulose of the pulp acts as an ion exchange material for heavy metals, forming a dynamic equilibrium. A well defined pulp production process, starting with used clothes, allows estimation of the concentration of historical heavy metals (Cu(2+), Pb(2+), Zn(2+), Cd(2+)) in the production water (river water). Ancient papers from well dated books are eluted without destruction of their paper and the resulting solution is analysed by ETAAS and inverse stripping voltammetry to determine the historical impact of metals. Afterwards in a flow system the eluted paper spot is equilibrated with different concentrations of heavy metals (Cu(2+), Pb(2+), Zn(2+), Cd(2+)) to plot the adsorption isotherm of that very spot. Both data together allows a calculation of the heavy metal content of the historical river. For different waters of Germany and the Netherlands of the 16th-18th Century the heavy metal load could be estimated. The resulting concentrations were mostly similar to the level of modern surface waters, but in the case of the Dutch waters of the 17th Century, they were e.g. for Pb(2+) significantly higher than modern

Patterned direct-write and screen-printing of NIR-to-visible upconverting inks for security applications.

Science.gov (United States)

Blumenthal, Tyler; Meruga, Jeevan; Stanley May, P; Kellar, Jon; Cross, William; Ankireddy, Krishnamraju; Vunnam, Swathi; Luu, Quocanh N

2012-05-11

Two methods of direct-write printing for producing highly resolved features of a polymer impregnated with luminescent upconversion phosphors for security applications are presented. The printed polymer structures range in shape from features to text. The thin polymer features were deposited by direct-write printing of atomized material as well as by screen-printing techniques. These films contain highly luminescent lanthanide-doped, rare-earth nanocrystals, β-NaYF₄:3%Er, 17%Yb, which are capped with oleic acid. This capping agent allows the nanocrystals to disperse throughout the films for full detailing of printed features. Upconversion of deposited features was obtained using a 980 nm wavelength laser with emission of upconverted light in the visible region at both 540 and 660 nm. Features were deposited onto high bond paper, Kapton®, and glass to demonstrate possible covert and forensic security printing applications, as they are printed in various features and invisible to 'naked-eye' viewing at low concentrations of nanocrystals.

Patterned direct-write and screen-printing of NIR-to-visible upconverting inks for security applications

International Nuclear Information System (INIS)

Blumenthal, Tyler; Meruga, Jeevan; Kellar, Jon; Cross, William; Ankireddy, Krishnamraju; Vunnam, Swathi; Stanley May, P; Luu, QuocAnh N

2012-01-01

Two methods of direct-write printing for producing highly resolved features of a polymer impregnated with luminescent upconversion phosphors for security applications are presented. The printed polymer structures range in shape from features to text. The thin polymer features were deposited by direct-write printing of atomized material as well as by screen-printing techniques. These films contain highly luminescent lanthanide-doped, rare-earth nanocrystals, β-NaYF 4 :3%Er, 17%Yb, which are capped with oleic acid. This capping agent allows the nanocrystals to disperse throughout the films for full detailing of printed features. Upconversion of deposited features was obtained using a 980 nm wavelength laser with emission of upconverted light in the visible region at both 540 and 660 nm. Features were deposited onto high bond paper, Kapton ® , and glass to demonstrate possible covert and forensic security printing applications, as they are printed in various features and invisible to ‘naked-eye’ viewing at low concentrations of nanocrystals. (paper)

Patterned direct-write and screen-printing of NIR-to-visible upconverting inks for security applications

Science.gov (United States)

Blumenthal, Tyler; Meruga, Jeevan; May, P. Stanley; Kellar, Jon; Cross, William; Ankireddy, Krishnamraju; Vunnam, Swathi; Luu, QuocAnh N.

2012-05-01

Two methods of direct-write printing for producing highly resolved features of a polymer impregnated with luminescent upconversion phosphors for security applications are presented. The printed polymer structures range in shape from features to text. The thin polymer features were deposited by direct-write printing of atomized material as well as by screen-printing techniques. These films contain highly luminescent lanthanide-doped, rare-earth nanocrystals, β-NaYF4:3%Er, 17%Yb, which are capped with oleic acid. This capping agent allows the nanocrystals to disperse throughout the films for full detailing of printed features. Upconversion of deposited features was obtained using a 980 nm wavelength laser with emission of upconverted light in the visible region at both 540 and 660 nm. Features were deposited onto high bond paper, Kapton®, and glass to demonstrate possible covert and forensic security printing applications, as they are printed in various features and invisible to ‘naked-eye’ viewing at low concentrations of nanocrystals.

Digital Colour Printing on the Way to Offset Quality

Directory of Open Access Journals (Sweden)

Andrew Tribute

2004-12-01

Full Text Available Digital production colour printing is now more than ten years old. The first implementations of this technology from Indigo and Xeikon started the market but they suffered problems with reliability,quality and overall running costs. They produced a very good-looking printed image but it was notcomparable to offset. Quality problems were that tints often were streaky or banded, flat tints did notreproduce well, and the overall image had a somewhat harsh reflective look.Ongoing developments of digital colour printing mainly from Xerox and Canon developed the marketand improved the economics of the process. Certain elements of the quality also improved. Indigoand Xeikon also showed significant quality improvements and better economics. The improvedquality came closer to the look of offset, but in most cases was still obviously printed digitally.New developments are happening in what is termed "Digital Colour Lite." This is a range of new slower presses coming from Japan which run at around 30 pages/minute and cost well under 50.000 Euro. A few of these are getting almost offset quality through the use of new chemical toners that significantly improve printing quality.At the same time as the quality of digital colour printing has improved, so have the cost economics of running the presses. Potential buyers of presses will have to understand the different business models for running these presses. These are the "click" models from most suppliers, or the pay by usage model as offered by Heidelberg with the NexPress.

Introduction to printed electronics

CERN Document Server

Suganuma, Katsuaki

2014-01-01

This book describes in detail modern technologies for printed electronics, explaining how nanotechnology and modern printing technology are merging to revolutionize electronics fabrication of thin, lightweight, large, and inexpensive products. Readers will benefit from the explanations of materials, devices and circuits used to design and implement the latest applications of printed electronics, such as thin flexible OLED displays, organic solar cells, OLED lighting, smart wallpaper, sensors, logic, memory and more.

Recent Progress in the Development of Printed Thin-Film Transistors and Circuits with High-Resolution Printing Technology.

Science.gov (United States)

Fukuda, Kenjiro; Someya, Takao

2017-07-01

Printed electronics enable the fabrication of large-scale, low-cost electronic devices and systems, and thus offer significant possibilities in terms of developing new electronics/optics applications in various fields. Almost all electronic applications require information processing using logic circuits. Hence, realizing the high-speed operation of logic circuits is also important for printed devices. This report summarizes recent progress in the development of printed thin-film transistors (TFTs) and integrated circuits in terms of materials, printing technologies, and applications. The first part of this report gives an overview of the development of functional inks such as semiconductors, electrodes, and dielectrics. The second part discusses high-resolution printing technologies and strategies to enable high-resolution patterning. The main focus of this report is on obtaining printed electrodes with high-resolution patterning and the electrical performance of printed TFTs using such printed electrodes. In the final part, some applications of printed electronics are introduced to exemplify their potential. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Prints Charles ja prints Michael külastasid Tallinna kirikuid / Allan Tammiku

Index Scriptorium Estoniae

Tammiku, Allan

2001-01-01

Prints Charles külastas 6. novembril Eesti-visiidi ajal Tallinna toomkirikut ja Pühavaimu kirikut, prints Michael viibis Tallinnas 11. novembril eravisiidil, ta külastas toomkirikut, Niguliste ja Pühavaimu kirikut

Semiotic Analysis Of Mcdonald's Printed Advertisement

OpenAIRE

URAIDA, SITI

2014-01-01

Keywords: Semiotic, printed advertisement, sign, icon, symbol, index, connotation, myth Printed advertisement has a promotional function as medium to advertise aproduct. It implicitly persuades people to create demand of product which is being advertised. In this study, the writer uses printed advertisement of McDonald's fast food company as the object. The printed advertisement was analyzed by usingSemiotics study. There are seven printed advertisements that were analyzes in this study. All ...

Vision based error detection for 3D printing processes

Directory of Open Access Journals (Sweden)

Baumann Felix

2016-01-01

Full Text Available 3D printers became more popular in the last decade, partly because of the expiration of key patents and the supply of affordable machines. The origin is located in rapid prototyping. With Additive Manufacturing (AM it is possible to create physical objects from 3D model data by layer wise addition of material. Besides professional use for prototyping and low volume manufacturing they are becoming widespread amongst end users starting with the so called Maker Movement. The most prevalent type of consumer grade 3D printers is Fused Deposition Modelling (FDM, also Fused Filament Fabrication FFF. This work focuses on FDM machinery because of their widespread occurrence and large number of open problems like precision and failure. These 3D printers can fail to print objects at a statistical rate depending on the manufacturer and model of the printer. Failures can occur due to misalignment of the print-bed, the print-head, slippage of the motors, warping of the printed material, lack of adhesion or other reasons. The goal of this research is to provide an environment in which these failures can be detected automatically. Direct supervision is inhibited by the recommended placement of FDM printers in separate rooms away from the user due to ventilation issues. The inability to oversee the printing process leads to late or omitted detection of failures. Rejects effect material waste and wasted time thus lowering the utilization of printing resources. Our approach consists of a camera based error detection mechanism that provides a web based interface for remote supervision and early failure detection. Early failure detection can lead to reduced time spent on broken prints, less material wasted and in some cases salvaged objects.

AirPrint Forensics: Recovering the Contents and Metadata of Printed Documents from iOS Devices

Directory of Open Access Journals (Sweden)

Luis Gómez-Miralles

2015-01-01

data they may store, opens new opportunities in the field of computer forensics. In 2010, version 4 of the iOS operating system introduced AirPrint, a simple and driverless wireless printing functionality supported by hundreds of printer models from all major vendors. This paper describes the traces left in the iOS device when AirPrint is used and presents a method for recovering content and metadata of documents that have been printed.

Durability of ink jet prints

International Nuclear Information System (INIS)

Dobric, E; Mirkovic, I Bolanca; Bolanca, Z

2010-01-01

The aim of this paper is the result presentation of some optical properties research for ink jet prints after: exposing the prints to the mixed daylight and artificial light, exposing of prints to the sun-light through the glass window, and exposing of prints to outdoor conditions during the summer months. The prints obtained by piezoelectric and thermal ink jet technologies were used in the researches. The dye-based inks and the pigmented inks based on water and the low solvent inks were used. The results of these researches, except the scientific contribution in the domain of understanding and explaining the environmental conditions on the gamut size, i.e. the range of color tonality, colorimetric stability and print quality, can be used by the ink and paper manufacturers in new formulations, offer data for the printer producers for further production and evaluation of the position of their products.

Luminous lip-prints as criminal evidence.

Science.gov (United States)

Castelló, Ana; Alvarez-Seguí, Mercedes; Verdú, Fernando

2005-12-20

Luminescence is specially a useful property for the search of invisible evidences at the scene of a crime. In the latent fingerprints particular case, there are at one's disposal fluorescent reagents for their localization. The study of latent lip prints (that is lip prints from protective lipstick, or permanent or long-lasting lipstick that do not leave any visible marks) is more recent than fingerprints study. Because of the different composition of both types of prints, different reagents have been tried out on their developing. Although, lysochromes are particularly useful reagents to obtain latent lip prints, it may occur on coloured or multicoloured surfaces, the developing is not perceived due to contrast problems between the reagent and the surface where the print is searched. Again, luminescence offers the possibility to solve this problem. Nile Red is being studied as a potential developer for latent lip prints. The results on very old prints (over 1year) indicate that this reagent is highly efficient to get latent lip prints.

Personalised 3D Printed Medicines: Which Techniques and Polymers Are More Successful?

Directory of Open Access Journals (Sweden)

Andrea Alice Konta

2017-09-01

Full Text Available The interindividual variability is an increasingly global problem when treating patients from different backgrounds with diverse customs, metabolism, and necessities. Dose adjustment is frequently based on empirical methods, and therefore, the chance of undesirable side effects to occur is high. Three-dimensional (3D Printed medicines are revolutionsing the pharmaceutical market as potential tools to achieve personalised treatments adapted to the specific requirements of each patient, taking into account their age, weight, comorbidities, pharmacogenetic, and pharmacokinetic characteristics. Additive manufacturing or 3D printing consists of a wide range of techniques classified in many categories but only three of them are mostly used in the 3D printing of medicines: printing-based inkjet systems, nozzle-based deposition systems, and laser-based writing systems. There are several drawbacks when using each technique and also the type of polymers readily available do not always possess the optimal properties for every drug. The aim of this review is to give an overview about the current techniques employed in 3D printing medicines, highlighting their advantages, disadvantages, along with the polymer and drug requirements for a successful printing. The major application of these techniques will be also discussed.

The presumed reader in car advertisements published in Teresina's printed newspapers, from 1950 to 2002

Directory of Open Access Journals (Sweden)

Francisco Alves Filho

2015-08-01

Full Text Available This article aims to present how the image of the presumed reader has been built in the printed newspapers of the city of Teresina (Piaui State, Brazil, with them being the following: O Piauí, Folha da Manhã, O Dia, and Diário do Povo. In order to do so, we have researched the bibliography referent to the studies of authors such as Charles Bazerman (2011, Carolyn Miller (2009 [1984], and Amy Devitt (2004, representatives of Gender Rhetorical Studies. Besides these, we have consulted Bakhtin's assumptions for studying genre, mainly extracted from Marxism and the Philosophy of Language, and Aesthetics of Verbal Creation, as well as Brazilian authors related to the study of discursive genres, such as Fiorin (2008, Marcuschi (2008, and Faraco (2009. With the research, we could confirm that the advertisements actually build social-historic blocks capable of mirroring the values of a society, but also capable of contributing directly for determined values to be restored or forgotten.

Manifestation of the Kabuki actors’ gender in woodblock prints of the Edo Period

Directory of Open Access Journals (Sweden)

Beata ROMANOWICZ

2015-06-01

Full Text Available The connection between Kabuki theatre and Japanese woodblock prints of the Edo period (1603–1868, especially in their portraits of actors called yakusha­‑e, offers an exceptional opportunity to analyse perceptions of the sex of the actor: as the hero of the drama, as well as the character performed on the stage. Both phenomena flourished in the Edo period and had a crucial impact on the visual art of the time, inspiring pictures of the Floating World (Jap. Ukiyo­‑e. The images on Ukiyo­‑e woodblock prints serve as a pretext for approaching the matter of whether to portray an actor as a performer (a man or as the character performed by him (which could also be a woman, as in the case of the onnagata actor. The author focuses on the actors’ identification with their own sex (only men appeared on the Kabuki stage and on cases of breaking the convention between the real actor and his stage emploi. In the first part, the paper discusses the historical background of Kabuki theatre, which was invented by a woman (Izumo‑no Okuni and then after a few government edicts, was allowed to be performed on the stage only by adult men. Since the Kabuki tradition has successfully continued until today, apart from surveys of theatrical archives, the author supports her arguments by also referring to contemporary phenomena, especially the Kabuki performances she has watched in Japan (in such theatres as: Kabuki‑za, Minami‑za, the National Theatre in Tokyo, and Zenshin‑za, and through interviews with actors and people of the theatre. In parallel, Ukiyo­‑e images of the Edo period are studied, with core research from the National Museum in Kraków, Poland, and its collection of Japanese woodblock prints (including over 4600 original works from the Edo Period, and with special attention paid to the yakusha­‑e portrait by Utagawa Kuniyoshi.

Graphic Arts. A Bilingual Text = Artes Graficas. Un Texto Bilingue.

Science.gov (United States)

Los Angeles Unified School District, CA. Div. of Career and Continuing Education.

This bilingual instructional text, one in a series of six texts covering various vocational and technical topics, provides secondary level English and Spanish instruction in graphic arts. Addressed in the individual sections are basic graphic arts (composition, stone and press work, offset printing, silk screen, and photography) and allied graphic…

Print-to-print: printer-enabled out-of-cleanroom multiobject microprinting method.

Science.gov (United States)

Xing, Siyuan; Zhao, Siwei; Pan, Tingrui

2014-01-01

Micropatterning techniques have gained growing interests from a broad range of engineering and biology researches as it realizes the high-throughput and highly quantitative investigations on miniature biological objects (e.g., cells and bacteria) by spatially defined micropatterns. However, most of the existing techniques rely on expensive instruments or intensive cleanroom access which may not be easy to be utilized in a regular biological laboratory. Here, we present the detailed procedures of a simple versatile microprinting process, referred to as Print-to-Print (P2P), to form multiobject micropatterns for potential biological applications. Only a solid-phase printer and custom-made superhydrophobic (SH) films are utilized for the printing and no thermal or chemical treatment is involved during the entire printing process. Moreover, the noncontact nature of droplet transferring and printing steps can be highly advantageous for sensitive biological uses. By the P2P process, a minimal feature resolution of 229 ± 17 μm has been successfully achieved. What's more, this approach has been applied to form micropatterning on various commonly used substrates in biology as well as multiobject co-patterns. In addition, the SH substrates have also been demonstrated to be reusable. Copyright © 2014 Elsevier Inc. All rights reserved.

Unleash the building bots: 3d printing structures with an autonomous robot swarm

Directory of Open Access Journals (Sweden)

Aant van der Zee

2017-12-01

Full Text Available 3D printing techniques for the building industry are developing fast. Concepts like Contour printing, concrete printing concepts of the TU/E and D Shape are examples. Despite the range of techniques is broad (and vary from a large gantry system, to a supersized Delta printer for example, many of the developed 3D printing machines are constraint in their movement. Mobile 3D printers however show advantages in flexibility, as they can move outside the constraint of a large 3D printer and they can move in the highly unstructured and hazardous environment of the building site, which can be dangerous for people to work in. The Institute for advanced architecture of Catalonia developed vehicles, which they call minibuilders, each designed for a special task in the building process, printing the foundation, printing a wall, smoothing the outer-wall etc. The minibuilders are used in succession according the building process. However they are still limited in their autonomy and capability. The minibuilders are tethered with a hose to a vehicle, which carries the concrete supply.

Making three-dimensional echocardiography more tangible: a workflow for three-dimensional printing with echocardiographic data

Directory of Open Access Journals (Sweden)

Azad Mashari MD

2016-12-01

Full Text Available Three-dimensional (3D printing is a rapidly evolving technology with several potential applications in the diagnosis and management of cardiac disease. Recently, 3D printing (i.e. rapid prototyping derived from 3D transesophageal echocardiography (TEE has become possible. Due to the multiple steps involved and the specific equipment required for each step, it might be difficult to start implementing echocardiography-derived 3D printing in a clinical setting. In this review, we provide an overview of this process, including its logistics and organization of tools and materials, 3D TEE image acquisition strategies, data export, format conversion, segmentation, and printing. Generation of patient-specific models of cardiac anatomy from echocardiographic data is a feasible, practical application of 3D printing technology.

3D-Printed Millimeter Wave Structures

Science.gov (United States)

2016-03-14

demonstrates the resolution of the printer with a 10 micron nozzle. Figure 2: Measured loss tangent of SEBS and SBS samples. 3D - Printed Millimeter... 3D printing of styrene-butadiene-styrene (SBS) and styrene ethylene/butylene-styrene (SEBS) is used to demonstrate the feasibility of 3D - printed ...Additionally, a dielectric lens is printed which improves the antenna gain of an open-ended WR-28 waveguide from 7 to 8.5 dBi. Keywords: 3D printing

Inkjet-Printed Lithium-Sulfur Microcathodes for All-Printed, Integrated Nanomanufacturing.

Science.gov (United States)

Milroy, Craig A; Jang, Seonpil; Fujimori, Toshihiko; Dodabalapur, Ananth; Manthiram, Arumugam

2017-03-01

Improved thin-film microbatteries are needed to provide appropriate energy-storage options to power the multitude of devices that will bring the proposed "Internet of Things" network to fruition (e.g., active radio-frequency identification tags and microcontrollers for wearable and implantable devices). Although impressive efforts have been made to improve the energy density of 3D microbatteries, they have all used low energy-density lithium-ion chemistries, which present a fundamental barrier to miniaturization. In addition, they require complicated microfabrication processes that hinder cost-competitiveness. Here, inkjet-printed lithium-sulfur (Li-S) cathodes for integrated nanomanufacturing are reported. Single-wall carbon nanotubes infused with electronically conductive straight-chain sulfur (S@SWNT) are adopted as an integrated current-collector/active-material composite, and inkjet printing as a top-down approach to achieve thin-film shape control over printed electrode dimensions is used. The novel Li-S cathodes may be directly printed on traditional microelectronic semicoductor substrates (e.g., SiO 2 ) or on flexible aluminum foil. Profilometry indicates that these microelectrodes are less than 10 µm thick, while cyclic voltammetry analyses show that the S@SWNT possesses pseudocapacitive characteristics and corroborates a previous study suggesting the S@SWNT discharge via a purely solid-state mechanism. The printed electrodes produce ≈800 mAh g -1 S initially and ≈700 mAh g -1 after 100 charge/discharge cycles at C/2 rate. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Remote Collaborative 3D Printing - Process Investigation

Science.gov (United States)

2016-04-01

COLLABORATIVE 3D PRINTING - PROCESS INVESTIGATION Cody M. Reese, PE CAD MODEL PRINT MODEL PRINT PREVIEW PRINTED PART AERIAL VIRTUAL This...REMOTE COLLABORATIVE 3D PRINTING - PROCESS INVESTIGATION 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Cody M. Reese...release; distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT The Remote Collaborative 3D Printing project is a collaboration between

Offset Printing Plate Quality Sensor on a Low-Cost Processor

Directory of Open Access Journals (Sweden)

Francisco Tirado

2013-10-01

Full Text Available The aim of this work is to develop a microprocessor-based sensor that measures the quality of the offset printing plate through the introduction of different image analysis applications. The main features of the presented system are the low cost, the low amount of power consumption, its modularity and easy integration with other industrial modules for printing plates, and its robustness against noise environments. For the sake of clarity, a viability analysis of previous software is presented through different strategies, based on dynamic histogram and Hough transform. This paper provides performance and scalability data compared with existing costly commercial devices. Furthermore, a general overview of quality control possibilities for printing plates is presented and could be useful to a system where such controls are regularly conducted.

3D-printed devices for continuous-flow organic chemistry

Directory of Open Access Journals (Sweden)

Vincenza Dragone

2013-05-01

Full Text Available We present a study in which the versatility of 3D-printing is combined with the processing advantages of flow chemistry for the synthesis of organic compounds. Robust and inexpensive 3D-printed reactionware devices are easily connected using standard fittings resulting in complex, custom-made flow systems, including multiple reactors in a series with in-line, real-time analysis using an ATR-IR flow cell. As a proof of concept, we utilized two types of organic reactions, imine syntheses and imine reductions, to show how different reactor configurations and substrates give different products.

Detection of Antibiotics and Evaluation of Antibacterial Activity with Screen-Printed Electrodes

Directory of Open Access Journals (Sweden)

Florentina-Daniela Munteanu

2018-03-01

Full Text Available This review provides a brief overview of the fabrication and properties of screen-printed electrodes and details the different opportunities to apply them for the detection of antibiotics, detection of bacteria and antibiotic susceptibility. Among the alternative approaches to costly chromatographic or ELISA methods for antibiotics detection and to lengthy culture methods for bacteria detection, electrochemical biosensors based on screen-printed electrodes present some distinctive advantages. Chemical and (biosensors for the detection of antibiotics and assays coupling detection with screen-printed electrodes with immunomagnetic separation are described. With regards to detection of bacteria, the emphasis is placed on applications targeting viable bacterial cells. While the electrochemical sensors and biosensors face many challenges before replacing standard analysis methods, the potential of screen-printed electrodes is increasingly exploited and more applications are anticipated to advance towards commercial analytical tools.

Characteristic Evaluation of Organic Light-Emitting Diodes Prepared with Stamp Printing Technique

Directory of Open Access Journals (Sweden)

Apisit Chittawanij

2017-01-01

Full Text Available We have reported on a stamp printing technique that uses PET release film as a printing stamp to deposit TPBi thin film served as the electron transport layer of the organic light-emitting diodes. TPBi thin film was printed with a good uniformity and resolution. Effect of deposition conditions on optical and electrical properties and surface roughness of TPBi thin film have been studied under spectroscopy and atomic force microscopy, respectively. It is found that characteristic of TPBi thin film is improved via controlled stamp temperature and time. Since TPBi thin film exhibits the surface morphology comparable to that of conventional spin-coating thin film, our findings suggest that PET release film-based stamp printing approach is possible to use as an alternative deposition of the organic thin film as compared with a traditional one.

Disposable screen-printed sensors for determination of duloxetine hydrochloride

Directory of Open Access Journals (Sweden)

Alarfaj Nawal A

2012-01-01

Full Text Available Abstract A screen-printed disposable electrode system for the determination of duloxetine hydrochloride (DL was developed using screen-printing technology. Homemade printing has been characterized and optimized on the basis of effects of the modifier and plasticizers. The fabricated bi-electrode potentiometric strip containing both working and reference electrodes was used as duloxetine hydrochloride sensor. The proposed sensors worked satisfactorily in the concentration range from 1.0 × 10-6-1.0 × 10-2 mol L-1 with detection limit reaching 5.0 × 10-7 mol L-1 and adequate shelf life of 6 months. The method is accurate, precise and economical. The proposed method has been applied successfully for the analysis of the drug in pure and in its dosage forms. In this method, there is no interference from any common pharmaceutical additives and diluents. Results of the analysis were validated statistically by recovery studies.

Methodical bases of perceptual mapping of printing industry companies

Directory of Open Access Journals (Sweden)

Kalinin Pavel

2017-01-01

Full Text Available This is to study the methodological foundations of perceptual mapping in printing industry enterprises. This research has a practice focus which affects the choice of its methodological framework. The authors use such scientific research as analysis of cause-effect relationships, synthesis, problem analysis, expert evaluation and image visualization methods. In this paper, the authors present their assessment of the competitive environment of major printing industry companies in Kirov oblast; their assessment employs perceptual mapping enables by Minitab 14. This technique can be used by experts in the field of marketing and branding to assess the competitive environment in any market. The object of research is printing industry in Kirov oblast. The most important conclusion of this study is that in perceptual mapping, all the parameters are integrated in a single system and provide a more objective view of the company’s market situation.

Emotiogenic Cognitive Function of Modern School Teaching Texts

Directory of Open Access Journals (Sweden)

Любовь Васильевна Ерохина

2015-12-01

Full Text Available The article is devoted to the analysis of emotional attractiveness of modern school educational texts and ecological/non-ecological influence upon pupils’ cognition in teaching communication. Reasoning is based on the thesis that - emotional attractiveness of modern school educational texts opposes their cognitive function. Emotional educational text profile and its components are under consideration. The article is concerned with ecological and cognitive and emotional asymmetry content. The material under focus is printed texts of some of modern school textbooks, teaching methodical aids, academic competitions, mass media information from the cognitive ecology point of view.

Printings, Political Parties and Public Opinion at the Province of Popayán, 1832-1853

Directory of Open Access Journals (Sweden)

Willian Alfredo Chapman Quevedo

2017-01-01

Full Text Available This article analyzes the incidences caused by printings and written texts during the public’s opinion creation between 1832 and 1853 at Popayan province. Thus, the public opinion was linked to the newspaper’s circulation, rags, scandal sheets and printed images. Likewise, it evidences that these printings and images were not exclusively design for a qualified audience but, the intention also was to reach the common people who were illiterate most of them. But, through orality and images, these people constructed an idea about the politic reality at that time. Hence, we conclude that writing and printed images, along with orality, were essential items to the intention of building a different reality. This last idea does not suggest that this experience was not mediated by comments but, it did influence the society of Popayan, and also interceding on the individual’s perception, a politic party and even the State.

3D Printed Paper-Based Microfluidic Analytical Devices

Directory of Open Access Journals (Sweden)

Yong He

2016-06-01

Full Text Available As a pump-free and lightweight analytical tool, paper-based microfluidic analytical devices (μPADs attract more and more interest. If the flow speed of μPAD can be programmed, the analytical sequences could be designed and they will be more popular. This reports presents a novel μPAD, driven by the capillary force of cellulose powder, printed by a desktop three-dimensional (3D printer, which has some promising features, such as easy fabrication and programmable flow speed. First, a suitable size-scale substrate with open microchannels on its surface is printed. Next, the surface of the substrate is covered with a thin layer of polydimethylsiloxane (PDMS to seal the micro gap caused by 3D printing. Then, the microchannels are filled with a mixture of cellulose powder and deionized water in an appropriate proportion. After drying in an oven at 60 °C for 30 min, it is ready for use. As the different channel depths can be easily printed, which can be used to achieve the programmable capillary flow speed of cellulose powder in the microchannels. A series of microfluidic analytical experiments, including quantitative analysis of nitrite ion and fabrication of T-sensor were used to demonstrate its capability. As the desktop 3D printer (D3DP is very cheap and accessible, this device can be rapidly printed at the test field with a low cost and has a promising potential in the point-of-care (POC system or as a lightweight platform for analytical chemistry.

3D Printing in Surgical Management of Double Outlet Right Ventricle

Directory of Open Access Journals (Sweden)

Shi-Joon Yoo

2018-01-01

Full Text Available Double outlet right ventricle (DORV is a heterogeneous group of congenital heart diseases that require individualized surgical approach based on precise understanding of the complex cardiovascular anatomy. Physical 3-dimensional (3D print models not only allow fast and unequivocal perception of the complex anatomy but also eliminate misunderstanding or miscommunication among imagers and surgeons. Except for those cases showing well-recognized classic surgical anatomy of DORV such as in cases with a typical subaortic or subpulmonary ventricular septal defect, 3D print models are of enormous value in surgical decision and planning. Furthermore, 3D print models can also be used for rehearsal of the intended procedure before the actual surgery on the patient so that the outcome of the procedure is precisely predicted and the procedure can be optimally tailored for the patient’s specific anatomy. 3D print models are invaluable resource for hands-on surgical training of congenital heart surgeons.

Initial investment to 3D printing technologies in a construction company

Directory of Open Access Journals (Sweden)

Cernohorsky, Zdenek

2017-06-01

Full Text Available This article deals with an initial investment to 3D printing technologies in a construction company. The investment refers to the use of building information models and their integration with 3D printing technology within a construction company. In the first part, there will be discussed an introduction of 3D printing scheme in a construction company from a lifecycle perspective in general. As a part of this scheme, the ideal variant of an initial investment will be considered a.k.a a pilot project. In the second part, there will be a more detailed discussion of the pilot project, more about each activities which should be its parts and which should analyze cost categories. These categories will be about particular lifecycle stages of the pilot project. In the third part, a summary is done. This article could be a handout for a construction company in a term of an initial investment to 3D printing.

Merging polygons on two-layer printed circuit board

Directory of Open Access Journals (Sweden)

Murov S. Yu.

2011-12-01

Full Text Available A method is proposed for solving the problem of connection of maximum number of isolated islands of metallized areas of the same chain, located on different layers of the printed circuit board. The method can be used in the automatic tracing of the boards.

Cleaning OCR'd text with Regular Expressions

OpenAIRE

Laura Turner O'Hara

2013-01-01

Optical Character Recognition (OCR)—the conversion of scanned images to machine-encoded text—has proven a godsend for historical research. This process allows texts to be searchable on one hand and more easily parsed and mined on the other. But we’ve all noticed that the OCR for historic texts is far from perfect. Old type faces and formats make for unique OCR. How might we improve poor quality OCR? The answer is Regular Expressions or “regex.”

Software for Quantitative Estimation of Coefficients of Ink Transfer on the Printed Substrate in Offset Printing

Science.gov (United States)

Varepo, L. G.; Trapeznikova, O. V.; Panichkin, A. V.; Roev, B. A.; Kulikov, G. B.

2018-04-01

In the framework of standardizing the process of offset printing, one of the most important tasks is the correct selection of the printing system components, taking into account the features of their interaction and behavior in the printing process. The program allows to calculate the transfer of ink on the printed material between the contacting cylindrical surfaces of the sheet-fed offset printing apparatus with the boundaries deformation. A distinctive feature of this software product is the modeling of the liquid flow having free boundaries and causing deformation of solid boundaries when flowing between the walls of two cylinders.

Application of Biomaterials and Inkjet Printing to Develop Bacterial Culture System

Directory of Open Access Journals (Sweden)

Tithimanan Srimongkon

2015-01-01

Full Text Available We created an automated bioassay system based on inkjet printing. Compared to conventional manual bacterial culture systems our printing approach improves the quality as well as the processing speed. A hydrophobic/hydrophilic pattern as a container supporting a culture medium was built on filter paper using a toluene solution of polystyrene for hydrophobization, followed by toluene printing to create several hydrophilic areas. As culture media we used a novel poly(vinyl alcohol based hydrogel and a standard calcium alginate hydrogel. The poly(vinyl alcohol hydrogel was formed by physical crosslinking poly(vinyl alcohol with adipic acid dihydrazide solutions. The conditions of poly(vinyl alcohol gelation were optimized for inkjet printability and the optimum mixture ratio was determined. The calcium alginate hydrogel was formed by chemical reaction between sodium alginate and CaCl2 solutions. Together with nutrients both hydrogel solutions were successfully printed on paper by means of the modified inkjet printer. The amount of each solution was demanded simply by outputting CMYK values. In the last step bacterial cells were printed on both hydrogel media. For both media we achieved a stable bacteria growth which was confirmed by microscopical imaging of the developed bacterial colonies.

Replicas in Cultural Heritage: 3d Printing and the Museum Experience

Science.gov (United States)

Ballarin, M.; Balletti, C.; Vernier, P.

2018-05-01

3D printing has seen a recent massive diffusion for several applications, not least the field of Cultural Heritage. Being used for different purposes, such as study, analysis, conservation or access in museum exhibitions, 3D printed replicas need to undergo a process of validation also in terms of metrical precision and accuracy. The Laboratory of Photogrammetry of Iuav University of Venice has started several collaborations with Italian museum institutions firstly for the digital acquisition and then for the physical reproduction of objects of historical and artistic interest. The aim of the research is to analyse the metric characteristics of the printed model in relation to the original data, and to optimize the process that from the survey leads to the physical representation of an object. In fact, this could be acquired through different methodologies that have different precisions (multi-image photogrammetry, TOF laser scanner, triangulation based laser scanner), and it always involves a long processing phase. It should not be forgotten that the digital data have to undergo a series of simplifications, which, on one hand, eliminate the noise introduced by the acquisition process, but on the other one, they can lead to discrepancies between the physical copy and the original geometry. In this paper we will show the results obtained on a small archaeological find that was acquired and reproduced for a museum exhibition intended for blind and partially sighted people.

Selecting suitable enclosures for digitally printed materials

International Nuclear Information System (INIS)

Burge, D; Rima, L

2010-01-01

It cannot be assumed that storage enclosures considered safe for traditionally printed images and documents are suitable for modern, digitally printed materials. In this project, a large variety of digital print types were tested using a modified version of the ISO 18916 Imaging materials-Processed imaging materials-Photographic activity test for enclosure materials standard to assess the risk to digital prints by paper enclosures known to be inert or reactive with traditional photographic prints. The types of enclosures tested included buffered and non-buffered cotton papers, and groundwood paper. In addition, qualitative filter paper that had been wetted and dried with either an acidic or basic solution was also tested to determine the effects of enclosure pH on digitally printed materials. It was determined that, in general, digital prints tended to be less reactive with various enclosure types than traditional prints. Digital prints were most sensitive to paper that contained groundwood. The enclosure reactivity test results were then integrated with previous published work on the tendencies of various enclosure types to abrade, ferrotype, or block to digital prints in order to create a comprehensive set of recommendations for digital print storage enclosures.

A database for reproducible manipulation research: CapriDB – Capture, Print, Innovate

Directory of Open Access Journals (Sweden)

Florian T. Pokorny

2017-04-01

Full Text Available We present a novel approach and database which combines the inexpensive generation of 3D object models via monocular or RGB-D camera images with 3D printing and a state of the art object tracking algorithm. Unlike recent efforts towards the creation of 3D object databases for robotics, our approach does not require expensive and controlled 3D scanning setups and aims to enable anyone with a camera to scan, print and track complex objects for manipulation research. The proposed approach results in detailed textured mesh models whose 3D printed replicas provide close approximations of the originals. A key motivation for utilizing 3D printed objects is the ability to precisely control and vary object properties such as the size, material properties and mass distribution in the 3D printing process to obtain reproducible conditions for robotic manipulation research. We present CapriDB – an extensible database resulting from this approach containing initially 40 textured and 3D printable mesh models together with tracking features to facilitate the adoption of the proposed approach.

Inkjet printed electronics using copper nanoparticle ink

OpenAIRE

Kang, Jin Sung; Kim, Hak Sung; Ryu, Jongeun; Thomas Hahn, H.; Jang, Seonhee; Joung, Jae Woo

2010-01-01

Inkjet printing of electrode using copper nanoparticle ink is presented. Electrode was printed on a flexible glass epoxy composite substrate using drop on demand piezoelectric dispenser and was sintered at 200 °C of low temperature in N2 gas condition. The printed electrodes were made with various widths and thickness. In order to control the thickness of the printed electrode, number of printing was varied. Resistivity of printed electrode was calculated from the cross-sectional area measure...

Checking a printed board

CERN Multimedia

1977-01-01

An 'Interactive Printed Circuit Board Design System' has been developed by a company in a Member-State. Printed circuits are now produced at the SB's surface treatment workshop using a digitized photo-plotter.

3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing.

Science.gov (United States)

Kuang, Xiao; Chen, Kaijuan; Dunn, Conner K; Wu, Jiangtao; Li, Vincent C F; Qi, H Jerry

2018-02-28

The three-dimensional (3D) printing of flexible and stretchable materials with smart functions such as shape memory (SM) and self-healing (SH) is highly desirable for the development of future 4D printing technology for myriad applications, such as soft actuators, deployable smart medical devices, and flexible electronics. Here, we report a novel ink that can be used for the 3D printing of highly stretchable, SM, and SH elastomer via UV-light-assisted direct-ink-write printing. An ink containing urethane diacrylate and a linear semicrystalline polymer is developed for the 3D printing of a semi-interpenetrating polymer network elastomer that can be stretched by up to 600%. The 3D-printed complex structures show interesting functional properties, such as high strain SM and SM -assisted SH capability. We demonstrate that such a 3D-printed SM elastomer has the potential application for biomedical devices, such as vascular repair devices. This research paves a new way for the further development of novel 4D printing, soft robotics, and biomedical devices.

The rheological behavior of disperse systems for 3D print-ing in constrcution: the problem of control and possibility of «nano» tools application

Directory of Open Access Journals (Sweden)

Slavcheva Galina Stanislavovna

2018-06-01

Full Text Available The paper considers the problem of creating a wider class of building materials used for 3D printing. From the point of view of classical rheology of disperse systems, the application of 3D printing technology in construction has been analyzed. Theoretical analysis of the models of rheological behavior is performed according to state of their structure and the dynamic of the 3D printing processes such as mixing, pumping, extrusion, multilayer casting and structural built-up in the printing layers. The main factors and criteria for the stability of heterogeneous disperse systems in dynamic and static 3D printing processes have been identified. The general scientific concept for optimization of admixtures for 3D printable materials has been developed in terms of viscosity, consistency, and parameters of flocculation and structural built-up. The technological tools to control rheological behavior of visco-plastic admixtures are identified in all stages of 3D printing. The relevant considerations include the concentration, size, morphology, chemical and mineralogical composition, the physical and chemical activity of the solid phase’s surface, and the ionic composition, viscosity, and density of the liquid phase. It is shown that the practical engineering solutions to control the rheology, structure formation, properties of 3D printing admixtures and materials must be based on traditional factors as well as with the use of «nano» tools. According to the nanotechnological principle «bottom-up», a set of «nano» tools is proposed to control such admixture properties as extrudability, formability, and buildability. In conclusion the scientific and technical tasks to be researched have been formulated.

Scholarly Electronic Full-Text Publications via the Internet: Issues and Impacts

Science.gov (United States)

Kosmin, Linda J.

1999-01-01

On-line access to complete texts of scholarly journal articles, conference papers, and books is facilitated by rapidly developing World-wide Web Internet access and capabilities. Meanwhile, print publications continue to be produced and read in spite of the proliferation of many networked electronic publications. The purpose of this presentation is to highlight fundamental issues impacting stakeholder groups, as the trend continues towards migration from paper to affordable ubiquitous networked full-text publications. Librarians, publishers, authors and end-users have various viewpoints, interests, and concerns. There are many issues challenging all stakeholder groups. For instance, all share concerns about administering copyright compliance and enforcing fair use. Uncontrollable electronic downstreaming could result in infringed copyright, while limiting a publisher's entitled revenue stream. Moreover, metered fee-based access may hamper scholarly information research. And, self-authoring on the Internet without peer filtering could lead to information clutter. Many related issues challenge librarians in particular. Among these are rising journal subscription prices, regardless if offered in print or electronic. Some electronic offerings are independent of print, others supplement or duplicate print; several publishers presently require subscribing to print in order to access electronic. Furthermore, numbers of publications are n'ow being marketed via the Internet directly to end-users, which can be viewed as encouraging users to bypass the traditional library. A key issue challenging publishers today is the rapidly expanding electronic user base that is demanding delivery of added-value full-text to desktop computers. Also of growing concern appears to be the decline in print sales to libraries, thereby reducing traditional revenue stream potential. Nowadays, publishers are more hesitant about investing in the production of publications geared toward small niche

Inkjet printing and inkjet infiltration of functional coatings for SOFCs fabrication

Directory of Open Access Journals (Sweden)

Tomov Rumen I.

2016-01-01

Full Text Available Inkjet printing fabrication and modification of electrodes and electrolytes of SOFCs were studied. Electromagnetic print-heads were utilized to reproducibly dispense droplets of inks at rates of several kHz on demand. Printing parameters including pressure, nozzle opening time and drop spreading were studied in order to optimize the inks jetting and delivery. Scanning electron microscopy revealed highly conformal ~ 6-10 μm thick dense electrolyte layers routinely produced on cermet and metal porous supports. Open circuit voltages ranging from 0.95 to 1.01 V, and a maximum power density of ~180 mW.cm−2 were measured at 750 °C on Ni-8YSZ/YSZ/LSM single cell 50×50 mm in size. The effect of anode and cathode microstructures on the electrochemical performance was investigated. Two - step fabrication of the electrodes using inkjet printing infiltration was implemented. In the first step the porous electrode scaffold was created printing suspension composite inks. During the second step inkjet printing infiltration was utilized for controllable loading of active elements and a formation of nano-grid decorations on the scaffolds radically reducing the activation polarization losses of both electrodes. Symmetrical cells of both types were characterized by impedance spectroscopy in order to reveal the relation between the microstructure and the electrochemical performance.

Influence of Gloss and Surface Roughness of Coated Ink Jet Papers on Print Uniformity

Directory of Open Access Journals (Sweden)

Ivana Jurič

2013-12-01

Full Text Available The final print quality depends on the quality of the digital image as well as the properties of the printing system, the inks and the paper used. One of the most widely used digital printing technologies is ink jet, where ink is ejected directly onto a substrate from a jet device driven by an electronic signal. Most ink jet inks have low viscosity and low surface tension, which pose high demands upon the surface properties of the paper. The aim of this study was to investigate the influence of paper properties of commercially available papers suitable for ink jet printing on print mottle, non-uniformity. We used two high glossy, one glossy, one semi-glossy and two matte papers. For the assessment of the surface properties, we measured surface roughness with the portable Roughness Tester TR 200. We also measured surface gloss with QIP Glossmaster. To characterise the print mottle we used the image analysis method – Gray level co-occurrence matrix (GLCM. Print mottle was estimated according to five GLCM parameters: Contrast, Correlation, Entropy, Energy and Homogeneity. Results obtained in this paper showed that the surface properties of paper are not in any direct relation with print uniformity.

Anomaly Detection with Text Mining

Data.gov (United States)

National Aeronautics and Space Administration — Many existing complex space systems have a significant amount of historical maintenance and problem data bases that are stored in unstructured text forms. The...

Transparent Electrodes with Nanotubes and Graphene for Printed Optoelectronic Applications

Directory of Open Access Journals (Sweden)

Marcin Słoma

2014-01-01

Full Text Available We report here on printed electroluminescent structures containing transparent electrodes made of carbon nanotubes and graphene nanoplatelets. Screen-printing and spray-coating techniques were employed. Electrodes and structures were examined towards optical parameters using spectrophotometer and irradiation meter. Electromechanical properties of transparent electrodes are exterminated with cyclical bending test. Accelerated aging process was conducted according to EN 62137 standard for reliability tests of electronics. We observed significant negative influence of mechanical bending on sheet resistivity of ITO, while resistivity of nanotube and graphene based electrodes remained stable. Aging process has also negative influence on ITO based structures resulting in delamination of printed layers, while those based on carbon nanomaterials remained intact. We observe negligible changes in irradiation for structures with carbon nanotube electrodes after accelerated aging process. Such materials demonstrate a high application potential in general purpose electroluminescent devices.

High-resolution direct 3D printed PLGA scaffolds: print and shrink

International Nuclear Information System (INIS)

Chia, Helena N; Wu, Benjamin M

2015-01-01

Direct three-dimensional printing (3DP) produces the final part composed of the powder and binder used in fabrication. An advantage of direct 3DP is control over both the microarchitecture and macroarchitecture. Prints which use porogen incorporated in the powder result in high pore interconnectivity, uniform porosity, and defined pore size after leaching. The main limitations of direct 3DP for synthetic polymers are the use of organic solvents which can dissolve polymers used in most printheads and limited resolution due to unavoidable spreading of the binder droplet after contact with the powder. This study describes a materials processing strategy to eliminate the use of organic solvent during the printing process and to improve 3DP resolution by shrinking with a non-solvent plasticizer. Briefly, poly(lactic-co-glycolic acid) (PLGA) powder was prepared by emulsion solvent evaporation to form polymer microparticles. The printing powder was composed of polymer microparticles dry mixed with sucrose particles. After printing with a water-based liquid binder, the polymer microparticles were fused together to form a network by solvent vapor in an enclosed vessel. The sucrose is removed by leaching and the resulting scaffold is placed in a solution of methanol. The methanol acts as a non-solvent plasticizer and allows for polymer chain rearrangement and efficient packing of polymer chains. The resulting volumetric shrinkage is ∼80% at 90% methanol. A complex shape (honey-comb) was designed, printed, and shrunken to demonstrate isotropic shrinking with the ability to reach a final resolution of ∼400 μm. The effect of type of alcohol (i.e. methanol or ethanol), concentration of alcohol, and temperature on volumetric shrinking was studied. This study presents a novel materials processing strategy to overcome the main limitations of direct 3DP to produce high resolution PLGA scaffolds. (paper)

High-resolution direct 3D printed PLGA scaffolds: print and shrink.

Science.gov (United States)

Chia, Helena N; Wu, Benjamin M

2014-12-17

Direct three-dimensional printing (3DP) produces the final part composed of the powder and binder used in fabrication. An advantage of direct 3DP is control over both the microarchitecture and macroarchitecture. Prints which use porogen incorporated in the powder result in high pore interconnectivity, uniform porosity, and defined pore size after leaching. The main limitations of direct 3DP for synthetic polymers are the use of organic solvents which can dissolve polymers used in most printheads and limited resolution due to unavoidable spreading of the binder droplet after contact with the powder. This study describes a materials processing strategy to eliminate the use of organic solvent during the printing process and to improve 3DP resolution by shrinking with a non-solvent plasticizer. Briefly, poly(lactic-co-glycolic acid) (PLGA) powder was prepared by emulsion solvent evaporation to form polymer microparticles. The printing powder was composed of polymer microparticles dry mixed with sucrose particles. After printing with a water-based liquid binder, the polymer microparticles were fused together to form a network by solvent vapor in an enclosed vessel. The sucrose is removed by leaching and the resulting scaffold is placed in a solution of methanol. The methanol acts as a non-solvent plasticizer and allows for polymer chain rearrangement and efficient packing of polymer chains. The resulting volumetric shrinkage is ∼80% at 90% methanol. A complex shape (honey-comb) was designed, printed, and shrunken to demonstrate isotropic shrinking with the ability to reach a final resolution of ∼400 μm. The effect of type of alcohol (i.e. methanol or ethanol), concentration of alcohol, and temperature on volumetric shrinking was studied. This study presents a novel materials processing strategy to overcome the main limitations of direct 3DP to produce high resolution PLGA scaffolds.

Coagulation and Adsorption Treatment of Printing Ink Wastewater

Directory of Open Access Journals (Sweden)

Maja Klančnik

2015-03-01

Full Text Available The intention of the study was to improve the efficiency of total organic carbon (TOC and colour removal from the wastewater samples polluted with flexographic printing ink following coagulation treatments with further adsorption onto activated carbons and ground orange peel. The treatment efficiencies were compared to those of further flocculation treatments and of coagulation and adsorption processes individually. Coagulation was a relatively effective single-treatment method, removing 99.7% of the colour and 86.9% of the organic substances (TOC from the printing ink wastewater samples. Further flocculation did not further eliminate organic pollutants, whereas subsequent adsorption with 7 g/l of granular activated carbon further reduced organic substances by 35.1%, and adsorption with 7 g/l of powdered activated carbon further reduced organic substances by 59.3%. Orange peel was an inappropriate adsorbent for wastewater samples with low amounts of pollution, such as water that had been treated by coagulation. However, in highly polluted printing ink wastewater samples, the adsorption treatment with ground orange peel achieved efficiencies comparable to those of the granular activated carbon treatments.

Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing

Directory of Open Access Journals (Sweden)

Ludovic Serex

2018-02-01

Full Text Available Advances in 3D printing have enabled the use of this technology in a growing number of fields, and have started to spark the interest of biologists. Having the particularity of being cell friendly and allowing multimaterial deposition, extrusion-based 3D printing has been shown to be the method of choice for bioprinting. However as biologically relevant constructs often need to be of high resolution and high complexity, new methods are needed, to provide an improved level of control on the deposited biomaterials. In this paper, we demonstrate how microfluidics can be used to add functions to extrusion 3D printers, which widens their field of application. Micromixers can be added to print heads to perform the last-second mixing of multiple components just before resin dispensing, which can be used for the deposition of new polymeric or composite materials, as well as for bioprinting new materials with tailored properties. The integration of micro-concentrators in the print heads allows a significant increase in cell concentration in bioprinting. The addition of rapid microfluidic switching as well as resolution increase through flow focusing are also demonstrated. Those elementary implementations of microfluidic functions for 3D printing pave the way for more complex applications enabling new prospects in 3D printing.

MONITORING DIAGNOSTIC INDICATORS DURING OPERATION OF A PRINT MACHIN

Directory of Open Access Journals (Sweden)

Jozef Dobránsky

2015-11-01

Full Text Available This article deals with monitoring diagnostic indicators during the operation of a machine used for production of packing materials with a print. It analyses low-frequency vibrations measured in individual spherical roller bearings in eight print positions. The rollers in these positions have a different pressure based on positioning these rollers in relation to the central roller. As a result, the article also deals with a correlation of pressure and level of measured low-frequency vibrations. The speed of the print machine (the speed of a line in meters per minute is a very important variable during its operation, this is why it is important to verify the values of vibrations in various speeds of the line, what can lead to revelation of one or more resonance areas. Moreover, it examines vibrations of the central roller drive and measurement of backlash of transmission cogs of this drive. Based on performed analyses recommendations for an operator of the machine have been conceived.

3D Printing of Biosamples: A Concise Review

Science.gov (United States)

Zhao, Victoria Xin Ting; Wong, Ten It; Zhou, Xiaodong

This paper reviews the recent development of 3D printing of biosamples, in terms of the 3D structure design, suitable printing technology, and available materials. Successfully printed 3D biosamples should possess the properties of high cell viability, vascularization and good biocompatibility. These goals are attained by printing the materials of hydrogels, polymers and cells, with a carefully selected 3D printer from the categories of inkjet printing, extrusion printing and laser printing, based on the uniqueness, advantages and disadvantages of these technologies. For recent developments, we introduce the 3D applications of creating scaffolds, printing cells for self-assembly and testing platforms. We foresee more bio-applications of 3D printing will be developed, with the advancements on materials and 3D printing machines.

Fear and Loathing in the News: A Qualitative Analysis of Canadian Print News Coverage of Youthful Offending in the Twentieth Century

Science.gov (United States)

Faucher, Chantal

2009-01-01

This article reports research findings on the representations of youth crime and of young lawbreakers in Canadian print media. The examination of a subset of the sample of news items shows that several themes emerge in the historical discussion of youthful offending in the news. Firstly, the prevailing portrayal of youth crime is that it is to be…

Study on the relationship of continuous laser printing and the distance of trace on the OPC

Directory of Open Access Journals (Sweden)

Xingzhou Han

2017-01-01

Full Text Available This thesis aims to seek the relationship between photosensitive drum cyclical trace distance of two pages (shorted for L' and continuity printing of laser printers. Characteristics quantification, statistics are chosen to evaluate the data and results. It is indicated that the regularity is existed between L' and continuity printing, and regular performance between different models of HP and Canon printers are consistent. According to the data, L' of continuous printing are summed up, the probability of replacing the front page and the middle page which can meet the continuity regularity are analyzed. The numerical interval is given of noncontinuous printing. The study can enhance the scientificity of printing document examination and have innovation and practical significance in civil disputes, criminal cases, and social community.

Formation and Characterization of Inkjet-Printed Nanosilver Lines on Plasma-Treated Glass Substrates

Directory of Open Access Journals (Sweden)

Jae-Sung Kwon

2018-02-01

Full Text Available In this study, we investigated geometrical characteristics of the inkjet-printed lines with non-zero receding contact angle (CA on plasma-treated substrates in terms of various printing variables and analyzed the fluidic behavior and hydrodynamic instability involved in the line formation process. The printing variables included surface energy, droplet overlap ratio, printing frequency, a number of ink droplets, substrate temperature and printing procedures. For the study, a colloidal suspension containing 56 wt % silver nanoparticles in tetradecane solvent was used as a printing ink. It has electrical resistivity of 4.7 μΩ·cm. The substrates were obtained by performing a plasma enhanced chemical vapor deposition (PECVD process with C4F8 and O2 under various treatment conditions. As results of the experiments, the surface shape and pattern of the inkjet-printed Ag lines were dominantly influenced by the surface energy of the substrates, among the printing variables. Accordingly even when the receding CA was non-zero, bulging instability of the lines occurred forming separate circular patterns or regular bulges connected by ridges. It is a new finding of this study, which is completely different with the bulging instability of inkjet lines with zero receding CA specified by previous researches. The bulging instability decreased by increasing surface temperature of the substrates or employing interlacing procedure instead of continuous procedure for printing. The interlacing procedure also was advantageous to fabricate thick and narrow Ag lines with well-defined shape through overprinting on a hydrophobic substrate. These results will contribute greatly to not only the production of various printed electronics containing high-aspect-ratio structures but also the improvement of working performance of the devices.

3D Bio-Printing Review

Science.gov (United States)

Du, Xianbin

2018-01-01

Ultimate goal of tissue engineering is to replace pathological or necrotic body tissue or organ by artificial tissue or organ and tissue engineering is a very promising research field. 3D bio-printing is a kind of emerging technologies and a branch of tissue engineering. It has made significant progress in the past decade. 3D bio-printing can realize tissue and organ construction in vitro and has wide application in basic research and pharmacy. This paper is to make an analysis and review on 3D bio-printing from the perspectives of bioink, printing technology and technology application.

3D printing for dummies

CERN Document Server

Hausman, Kalani Kirk

2014-01-01

Get started printing out 3D objects quickly and inexpensively! 3D printing is no longer just a figment of your imagination. This remarkable technology is coming to the masses with the growing availability of 3D printers. 3D printers create 3-dimensional layered models and they allow users to create prototypes that use multiple materials and colors.  This friendly-but-straightforward guide examines each type of 3D printing technology available today and gives artists, entrepreneurs, engineers, and hobbyists insight into the amazing things 3D printing has to offer. You'll discover methods for

3D Printing: Print the future of ophthalmology.

Science.gov (United States)

Huang, Wenbin; Zhang, Xiulan

2014-08-26

The three-dimensional (3D) printer is a new technology that creates physical objects from digital files. Recent technological advances in 3D printing have resulted in increased use of this technology in the medical field, where it is beginning to revolutionize medical and surgical possibilities. It is already providing medicine with powerful tools that facilitate education, surgical planning, and organ transplantation research. A good understanding of this technology will be beneficial to ophthalmologists. The potential applications of 3D printing in ophthalmology, both current and future, are explored in this article. Copyright 2014 The Association for Research in Vision and Ophthalmology, Inc.

Research on the Mass Digitization of the Print Collection

Directory of Open Access Journals (Sweden)

Li Yongmei

2017-10-01

Full Text Available [Purpose/significance] The mass digitization of the print collection is an inevitable action for digital libraries. It has enlarged the depth and breadth of library services, and has enormously promoted the development and progress of academic exchange and academic research. [Method/process] This paper analyzed the global mass digitization of the print collection in terms of the origin, environmental factors, development status and current problems. It took HathiTrust as a case study. [Result/conclusion] Building the principles, solving the copyright problems with fair use and establishing a multi-stage and multi-sided framework for cooperation are important measures to promote the full realization of the mass digitization.

Application to printed resistors

International Nuclear Information System (INIS)

Hachiyanagi, Yoshimi; Uraki, Hisatsugu; Sawamura, Masashi

1989-01-01

Most of printed circuit boards are made at present by etching copper foils which are laminated on insulating composite boards of paper/phenol resin or glass nonwoven fabric/epoxy rein. This is called subtractive process, and since this is a wet process, the problem of coping with the pollution due to etching solution, plating solution and others is involved. As the method of solving this problem, attention has been paid to the dry process which forms conductor patterns by screen printing using electro-conductive paste. For such resin substrates, generally polymer thick films (PTF) using thermosetting resin as the binder are used. Also the research on the formation of resistors, condensers and other parts by printing using the technology of cermet thick films (CTF) and PTF is active, and it is partially put in practical use. The problems are the deformation and deterioration of substrates, therefore, as the countermeasures, electron beam hardening type PTF has been studied, and various pastes have been developed. In this paper, electron beam hardening type printed resistors are reported. The features, resistance paste, and a number of the experiments on printed resistors are described. (K.I.)

Emerging Applications of Bedside 3D Printing in Plastic Surgery

Directory of Open Access Journals (Sweden)

Michael P Chae

2015-06-01

Full Text Available Modern imaging techniques are an essential component of preoperative planning in plastic and reconstructive surgery. However, conventional modalities, including three-dimensional (3D reconstructions, are limited by their representation on 2D workstations. 3D printing has been embraced by early adopters to produce medical imaging-guided 3D printed biomodels that facilitate various aspects of clinical practice. The cost and size of 3D printers have rapidly decreased over the past decade in parallel with the expiration of key 3D printing patents. With increasing accessibility, investigators are now able to convert standard imaging data into Computer Aided Design (CAD files using various 3D reconstruction softwares and ultimately fabricate 3D models using 3D printing techniques, such as stereolithography (SLA, multijet modeling (MJM, selective laser sintering (SLS, binder jet technique (BJT, and fused deposition modeling (FDM. Significant improvements in clinical imaging and user-friendly 3D software have permitted computer-aided 3D modeling of anatomical structures and implants without out-sourcing in many cases. These developments offer immense potential for the application of 3D printing at the bedside for a variety of clinical applications. However, many clinicians have questioned whether the cost-to-benefit ratio justifies its ongoing use. In this review the existing uses of 3D printing in plastic surgery practice, spanning the spectrum from templates for facial transplantation surgery through to the formation of bespoke craniofacial implants to optimize post-operative aesthetics, are described. Furthermore, we discuss the potential of 3D printing to become an essential office-based tool in plastic surgery to assist in preoperative planning, patient and surgical trainee education, and the development of intraoperative guidance tools and patient-specific prosthetics in everyday surgical practice.

Inkjet-Printed Small-Molecule Organic Light-Emitting Diodes: Halogen-Free Inks, Printing Optimization, and Large-Area Patterning.

Science.gov (United States)

Zhou, Lu; Yang, Lei; Yu, Mengjie; Jiang, Yi; Liu, Cheng-Fang; Lai, Wen-Yong; Huang, Wei

2017-11-22

Manufacturing small-molecule organic light-emitting diodes (OLEDs) via inkjet printing is rather attractive for realizing high-efficiency and long-life-span devices, yet it is challenging. In this paper, we present our efforts on systematical investigation and optimization of the ink properties and the printing process to enable facile inkjet printing of conjugated light-emitting small molecules. Various factors on influencing the inkjet-printed film quality during the droplet generation, the ink spreading on the substrates, and its solidification processes have been systematically investigated and optimized. Consequently, halogen-free inks have been developed and large-area patterning inkjet printing on flexible substrates with efficient blue emission has been successfully demonstrated. Moreover, OLEDs manufactured by inkjet printing the light-emitting small molecules manifested superior performance as compared with their corresponding spin-cast counterparts.

Banner Pages on the New Printing Infrastructure

CERN Multimedia

2006-01-01

Changes to the printing service were announced in CERN Bulletin No. 37-38/2006. In the new infrastructure, the printing of the banner page has been disabled in order to reduce paper consumption. Statistics show that the average print job size is small and the paper savings by not printing the banner page could be up to 20 %. When each printer is moved onto the new infrastructure banner page printing will be disabled. In the case of corridor printers which are shared by several users, the Helpdesk can re-enable banner page printing upon request. We hope ultimately to arrive at a situation where banner page printing is enabled on fewer than 10% of printers registered on the network. You can still print banner pages on printers where it has been centrally disabled by using Linux. Simply add it to your print job on the client side by adding the -o job-sheets option to your lpr command. Detailed documentation is available on each SLC3/4 under the following link: http://localhost:631/sum.html#4_2 Please bea...

İlköğretim Düzeyinde Okutulan Türkçe Tarih Metinlerinde Adlaştırma Temel Alınarak Sözbilimsel Kipin Saptanması (Defining Preferred Rhetorical Mode in Primary School Historical Texts via Nominalisation

Directory of Open Access Journals (Sweden)

Bilge TÜRKKAN

2009-10-01

Full Text Available The Technology of History, which is used in coding historical texts, aiming at distancing the recoverable past from story, evolves these texts from narrative to argumentation rhetorical mode, or from more concrete to more abstract. This study questions whether or not this evolution function and the rhetorical modes preferred in historical texts can be defined taking nominalisation, which is the most common means of coding abstraction and distancing, as a criterion. The results of the study show that, the frequency and the functions of the nominalisations which were analysed within the framework of Systemic Functional Linguistic and in the scope of a sampling comprising of texts obtained from the textbooks used in primary education in Turkey, can be used as a criterion in defining the preferred rhetorical mode in the historical texts.

Microintaglio Printing for Soft Lithography-Based in Situ Microarrays

Directory of Open Access Journals (Sweden)

Manish Biyani

2015-07-01

Full Text Available Advances in lithographic approaches to fabricating bio-microarrays have been extensively explored over the last two decades. However, the need for pattern flexibility, a high density, a high resolution, affordability and on-demand fabrication is promoting the development of unconventional routes for microarray fabrication. This review highlights the development and uses of a new molecular lithography approach, called “microintaglio printing technology”, for large-scale bio-microarray fabrication using a microreactor array (µRA-based chip consisting of uniformly-arranged, femtoliter-size µRA molds. In this method, a single-molecule-amplified DNA microarray pattern is self-assembled onto a µRA mold and subsequently converted into a messenger RNA or protein microarray pattern by simultaneously producing and transferring (immobilizing a messenger RNA or a protein from a µRA mold to a glass surface. Microintaglio printing allows the self-assembly and patterning of in situ-synthesized biomolecules into high-density (kilo-giga-density, ordered arrays on a chip surface with µm-order precision. This holistic aim, which is difficult to achieve using conventional printing and microarray approaches, is expected to revolutionize and reshape proteomics. This review is not written comprehensively, but rather substantively, highlighting the versatility of microintaglio printing for developing a prerequisite platform for microarray technology for the postgenomic era.

Active origami by 4D printing

International Nuclear Information System (INIS)

Ge, Qi; Qi, H Jerry; Dunn, Martin L; Dunn, Conner K

2014-01-01

Recent advances in three dimensional (3D) printing technology that allow multiple materials to be printed within each layer enable the creation of materials and components with precisely controlled heterogeneous microstructures. In addition, active materials, such as shape memory polymers, can be printed to create an active microstructure within a solid. These active materials can subsequently be activated in a controlled manner to change the shape or configuration of the solid in response to an environmental stimulus. This has been termed 4D printing, with the 4th dimension being the time-dependent shape change after the printing. In this paper, we advance the 4D printing concept to the design and fabrication of active origami, where a flat sheet automatically folds into a complicated 3D component. Here we print active composites with shape memory polymer fibers precisely printed in an elastomeric matrix and use them as intelligent active hinges to enable origami folding patterns. We develop a theoretical model to provide guidance in selecting design parameters such as fiber dimensions, hinge length, and programming strains and temperature. Using the model, we design and fabricate several active origami components that assemble from flat polymer sheets, including a box, a pyramid, and two origami airplanes. In addition, we directly print a 3D box with active composite hinges and program it to assume a temporary flat shape that subsequently recovers to the 3D box shape on demand. (paper)

Active origami by 4D printing

Science.gov (United States)

Ge, Qi; Dunn, Conner K.; Qi, H. Jerry; Dunn, Martin L.

2014-09-01

Recent advances in three dimensional (3D) printing technology that allow multiple materials to be printed within each layer enable the creation of materials and components with precisely controlled heterogeneous microstructures. In addition, active materials, such as shape memory polymers, can be printed to create an active microstructure within a solid. These active materials can subsequently be activated in a controlled manner to change the shape or configuration of the solid in response to an environmental stimulus. This has been termed 4D printing, with the 4th dimension being the time-dependent shape change after the printing. In this paper, we advance the 4D printing concept to the design and fabrication of active origami, where a flat sheet automatically folds into a complicated 3D component. Here we print active composites with shape memory polymer fibers precisely printed in an elastomeric matrix and use them as intelligent active hinges to enable origami folding patterns. We develop a theoretical model to provide guidance in selecting design parameters such as fiber dimensions, hinge length, and programming strains and temperature. Using the model, we design and fabricate several active origami components that assemble from flat polymer sheets, including a box, a pyramid, and two origami airplanes. In addition, we directly print a 3D box with active composite hinges and program it to assume a temporary flat shape that subsequently recovers to the 3D box shape on demand.

Inkjet and screen printing for electronic applications

OpenAIRE

Medina Rodríguez, Beatriz

2016-01-01

Printed electronics (PE) is a set of printing methods used to create electrical devices on various substrates. Printing typically uses common printing equipment suitable for defining patterns on material, such as screen printing, flexography, gravure, offset lithography, and inkjet. Electrically functional, electronic or optical inks are deposited on the substrate, creating active or passive devices. PE offers a great advantage when compared to traditional processes or microelectronics du...

Can lip prints provide biologic evidence?

Science.gov (United States)

Sharma, Preeti; Sharma, Neeraj; Wadhwan, Vijay; Aggarwal, Pooja

2016-01-01

Lip prints are unique and can be used in personal identification. Very few studies are available which establish them as biological evidence in the court of law. Thus, the objective of this study was to attempt to isolate DNA and obtain full short tandem repeat (STR) loci of the individual from the lip prints on different surfaces. Twelve lip prints were procured on different surfaces such as tissue paper, cotton cloth, ceramic tile, and glass surface. Latent lip prints were developed using fingerprint black powder. Lipstick-coated lip prints were also collected on the same supporting items. DNA was isolated, quantified, and amplified using Identifiler™ kit to type 15 STR loci. Ample quantity of DNA was extracted from all the lip print impressions and 15 loci were successfully located in seven samples. Fourteen loci were successfully typed in 3 lip impressions while 13 loci were typed in 2 samples. This study emphasizes the relevance of lip prints at the scene of crime. Extraction of DNA followed by typing of STR loci establishes the lip prints as biological evidence too. Tissue papers, napkins, cups, and glasses may have imprints of the suspect's lips. Thus, the full genetic profile is extremely useful for the forensic team.

3D printed e-tongue

Science.gov (United States)

Gaál, Gabriel; da Silva, Tatiana A.; Gaál, Vladimir; Hensel, Rafael C.; Amaral, Lucas R.; Rodrigues, Varlei; Riul, Antonio

2018-05-01

Nowadays, one of the biggest issues addressed to electronic sensor fabrication is the build-up of efficient electrodes as an alternative way to the expensive, complex and multistage processes required by traditional techniques. Printed electronics arises as an interesting alternative to fulfill this task due to the simplicity and speed to stamp electrodes on various surfaces. Within this context, the Fused Deposition Modeling 3D printing is an emerging, cost-effective and alternative technology to fabricate complex structures that potentiates several fields with more creative ideas and new materials for a rapid prototyping of devices. We show here the fabrication of interdigitated electrodes using a standard home-made CoreXY 3D printer using transparent and graphene-based PLA filaments. Macro 3D printed electrodes were easily assembled within 6 minutes with outstanding reproducibility. The electrodes were also functionalized with different nanostructured thin films via dip-coating Layer-by-Layer technique to develop a 3D printed e-tongue setup. As a proof of concept, the printed e-tongue was applied to soil analysis. A control soil sample was enriched with several macro-nutrients to the plants (N, P, K, S, Mg and Ca) and the discrimination was done by electrical impedance spectroscopy of water solution of the soil samples. The data was analyzed by Principal Component Analysis and the 3D printed sensor distinguished clearly all enriched samples despite the complexity of the soil chemical composition. The 3D printed e-tongue successfully used in soil analysis encourages further investments in developing new sensory tools for precision agriculture and other fields exploiting the simplicity and flexibility offered by the 3D printing techniques.

Plasma jet printing for flexible substrates

Energy Technology Data Exchange (ETDEWEB)

Gandhiraman, Ram P.; Singh, Eric; Diaz-Cartagena, Diana C.; Koehne, Jessica; Meyyappan, M. [Center for Nanotechnology, NASA Ames Research Center, Moffett Field, California 94035 (United States); Nordlund, Dennis [Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States)

2016-03-21

Recent interest in flexible electronics and wearable devices has created a demand for fast and highly repeatable printing processes suitable for device manufacturing. Robust printing technology is critical for the integration of sensors and other devices on flexible substrates such as paper and textile. An atmospheric pressure plasma-based printing process has been developed to deposit different types of nanomaterials on flexible substrates. Multiwalled carbon nanotubes were deposited on paper to demonstrate site-selective deposition as well as direct printing without any type of patterning. Plasma-printed nanotubes were compared with non-plasma-printed samples under similar gas flow and other experimental conditions and found to be denser with higher conductivity. The utility of the nanotubes on the paper substrate as a biosensor and chemical sensor was demonstrated by the detection of dopamine, a neurotransmitter, and ammonia, respectively.

Networked Print Production: Does JDF Provide a Perfect Workflow?

Directory of Open Access Journals (Sweden)

Bernd Zipper

2004-12-01

Full Text Available The "networked printing works" is a well-worn slogan used by many providers in the graphics industry and for the past number of years printing-works manufacturers have been working on the goal of achieving the "networked printing works". A turning point from the concept to real implementation can now be expected at drupa 2004: JDF (Job Definition Format and thus "networked production" will form the center of interest here. The first approaches towards a complete, networked workflow between prepress, print and postpress in production are already available - the products and solutions will now be presented publicly at drupa 2004. So, drupa 2004 will undoubtedly be the "JDF-drupa" - the drupa where machines learn to communicate with each other digitally - the drupa, where the dream of general system and job communication in the printing industry can be first realized. CIP3, which has since been renamed CIP4, is an international consortium of leading manufacturers from the printing and media industry who have taken on the task of integrating processes for prepress, print and postpress. The association, to which nearly all manufacturers in the graphics industry belong, has succeeded with CIP3 in developing a first international standard for the transmission of control data in the print workflow.Further development of the CIP4 standard now includes a more extensive "system language" called JDF, which will guarantee workflow communication beyond manufacturer boundaries. However, not only data for actual print production will be communicated with JDF (Job Definition Format: planning and calculation data for MIS (Management Information systems and calculation systems will also be prepared. The German printing specialist Hans-Georg Wenke defines JDF as follows: "JDF takes over data from MIS for machines, aggregates and their control desks, data exchange within office applications, and finally ensures that data can be incorporated in the technical workflow

A simple, low-cost conductive composite material for 3D printing of electronic sensors.

Directory of Open Access Journals (Sweden)

Simon J Leigh

Full Text Available 3D printing technology can produce complex objects directly from computer aided digital designs. The technology has traditionally been used by large companies to produce fit and form concept prototypes ('rapid prototyping' before production. In recent years however there has been a move to adopt the technology as full-scale manufacturing solution. The advent of low-cost, desktop 3D printers such as the RepRap and Fab@Home has meant a wider user base are now able to have access to desktop manufacturing platforms enabling them to produce highly customised products for personal use and sale. This uptake in usage has been coupled with a demand for printing technology and materials able to print functional elements such as electronic sensors. Here we present formulation of a simple conductive thermoplastic composite we term 'carbomorph' and demonstrate how it can be used in an unmodified low-cost 3D printer to print electronic sensors able to sense mechanical flexing and capacitance changes. We show how this capability can be used to produce custom sensing devices and user interface devices along with printed objects with embedded sensing capability. This advance in low-cost 3D printing with offer a new paradigm in the 3D printing field with printed sensors and electronics embedded inside 3D printed objects in a single build process without requiring complex or expensive materials incorporating additives such as carbon nanotubes.

What is happening with our printed newspapers?

Directory of Open Access Journals (Sweden)

Jevtović Zoran

2013-01-01

Full Text Available The changes that have occurred in the first decade of this century have dramatically shook the media, especially printed newspapers. Based on the comparative studies on media system in wealthy, developing countries and southern European countries, we came to conclusion that the internet is not the main cause of the newspaper industry collapse, at the time of the increased use of the internet and the decline of newspaper circulation. Internet is and will always be the important factor, but this is the crisis that has hit the media the most, especially the advertising the newspapers depended on. Although internet did not kill printed newspapers, some sites destroyed profitable category of advertising in newspapers, which evolved along with them. In such circumstances, printed newspapers, if tailored to measure the audience, can still play an important role in society. Journalism remains the basis of the media, as the largest source of information, and newspapers content, in new circumstances, is not used for news, but for reflection and background. All this indicates that we now have the domination of mixed media use, the coexistence of old and new, because wherever they are, new media always complement the old media, rather than change them. Most of the news that is shared on-line is manufactured in traditional media organizations, and newspapers and television produce more news and reach larger audience than any other media organization. That is how the new time has imposed the new modified business model that combines print and digital edition, sales and advertising and is based on loyal audience.

The Holy Text and Violence : Levinas and Fundamentalism

NARCIS (Netherlands)

Poorthuis, Marcel; Breitlin, Andris; Bremmers, Chris; Cools, Arthur

2015-01-01

Levinas'rejection of a historical ciritcal approach to sacred texts as well as his depreciation of Spinoza's view of the Bible might bring him close to fundamentalism. A thorough analysis is necessary to demonstrate essential differences. Levinas'rejection of a historical ciritcal approach to sacred

Historical tradition in Serbian genre literature

Directory of Open Access Journals (Sweden)

Đorđević Ivan

2008-01-01

Full Text Available This paper discusses two Serbian science-fiction stories with a special emphasis on the motives in their narrative structure; the motive analysis is focused on those motives that represent a transposition of 'historical tradition' elements. The key words connecting images appearing in this context are: fear of losing (national identity and a strategy of resistance towards those, who presumably, want to 'take over' the identity. In this sense, a return to 'the historical tradition', in the analyzed texts, aims to reassess certain past models indicating at the same time those that have successfully served and endured as historical models in this discourse.

The NIH 3D Print Exchange: A Public Resource for Bioscientific and Biomedical 3D Prints

OpenAIRE

Coakley, Meghan F.; Hurt, Darrell E.; Weber, Nick; Mtingwa, Makazi; Fincher, Erin C.; Alekseyev, Vsevelod; Chen, David T.; Yun, Alvin; Gizaw, Metasebia; Swan, Jeremy; Yoo, Terry S.; Huyen, Yentram

2014-01-01

The National Institutes of Health (NIH) has launched the NIH 3D Print Exchange, an online portal for discovering and creating bioscientifically relevant 3D models suitable for 3D printing, to provide both researchers and educators with a trusted source to discover accurate and informative models. There are a number of online resources for 3D prints, but there is a paucity of scientific models, and the expertise required to generate and validate such models remains a barrier. The NIH 3D Print ...

Production and 3D printing processing of bio-based thermoplastic filament

Directory of Open Access Journals (Sweden)

Gkartzou Eleni

2017-01-01

Full Text Available In this work, an extrusion-based 3D printing technique was employed for processing of biobased blends of Poly(Lactic Acid (PLA with low-cost kraft lignin. In Fused Filament Fabrication (FFF 3D printing process, objects are built in a layer-by-layer fashion by melting, extruding and selectively depositing thermoplastic fibers on a platform. These fibers are used as building blocks for more complex structures with defined microarchitecture, in an automated, cost-effective process, with minimum material waste. A sustainable material consisting of lignin biopolymer blended with poly(lactic acid was examined for its physical properties and for its melt processability during the FFF process. Samples with different PLA/lignin weight ratios were prepared and their mechanical (tensile testing, thermal (Differential Scanning Calorimetry analysis and morphological (optical and scanning electron microscopy, SEM properties were studied. The composition with optimum properties was selected for the production of 3D-printing filament. Three process parameters, which contribute to shear rate and stress imposed on the melt, were examined: extrusion temperature, printing speed and fiber’s width varied and their effect on extrudates’ morphology was evaluated. The mechanical properties of 3D printed specimens were assessed with tensile testing and SEM fractography.

Electron beam hardening type copper plate printing ink

International Nuclear Information System (INIS)

Kawamura, Eiji; Inoue, Mitsuo; Kusaki, Satoichiro

1989-01-01

Copper plate printing is the printing method of filling ink in the parts of concave printing elements on a type area, and transferring the ink to a base, and it is the feature that the ink in the printing element parts of a print rises. Copper plate prints show profound feeling, in addition, its effect of preventing forgery is high. This method is generally called engraving printing, and is used frequently for printing various bills and artistic prints. The electron beam irradiation apparatus installed in the laboratory of the Printing Bureau, Ministry of Finance, is an experimental machine of area beam type, and is so constructed as to do batch conveyance and web conveyance. As the ink in printing element parts rises, the offset at the delivery part of a printing machine becomes a problem. Electron beam is superior in its transparency, and can dry instantaneously to the inside of opaque ink. At 200 kV of acceleration voltage, the ink of copper plate prints can be hardened by electron beam irradiation. The dilution monomers as the vehicle for ink were tested for their dilution capability and the effect of electron beam hardening. The problem in the utilization of electron beam is the deterioration of papers, and the counter-measures were tested. (K.I.)

Open source 3D-printed 1000 μL micropump

Directory of Open Access Journals (Sweden)

Jorge Bravo-Martinez

2018-04-01

Full Text Available Scientific innovation goes hand in hand with technological innovation, so scientific work depends to a great extent on the hardware available in the laboratory. The investment in developing countries is still far below that of OECD countries, which was about 2.4% of the gross domestic product (GDP in 2015. In stark contrast, Brazil made the highest investment of Latin American countries at just 1.2%. Today, the “open-source revolution” appears more than ever to be a powerful ally for the promotion of development and the narrowing of the economic gap between developed and developing countries. In this context, this article presents the design of a 1000 μl 3D printed micropump. It is a practical and simple design inspired by pipette pumps. The present design was printed with a 3D printer and assembled very easily with common tools. Upon comparison of the micropump’s performance, it exhibits a systematic error between 1.4 and 3.8% of the volume and a random error between 0.38 and 9.5% of the volumen. Keywords: Open source, 3D printed micropump, 3D printing, DIY labware

Ankle-Foot Orthosis Made by 3D Printing Technique and Automated Design Software

Directory of Open Access Journals (Sweden)

Yong Ho Cha

2017-01-01

Full Text Available We described 3D printing technique and automated design software and clinical results after the application of this AFO to a patient with a foot drop. After acquiring a 3D modelling file of a patient’s lower leg with peroneal neuropathy by a 3D scanner, we loaded this file on the automated orthosis software and created the “STL” file. The designed AFO was printed using a fused filament fabrication type 3D printer, and a mechanical stress test was performed. The patient alternated between the 3D-printed and conventional AFOs for 2 months. There was no crack or damage, and the shape and stiffness of the AFO did not change after the durability test. The gait speed increased after wearing the conventional AFO (56.5 cm/sec and 3D-printed AFO (56.5 cm/sec compared to that without an AFO (42.2 cm/sec. The patient was more satisfied with the 3D-printed AFO than the conventional AFO in terms of the weight and ease of use. The 3D-printed AFO exhibited similar functionality as the conventional AFO and considerably satisfied the patient in terms of the weight and ease of use. We suggest the possibility of the individualized AFO with 3D printing techniques and automated design software.

The accuracy of a method for printing three-dimensional spinal models.

Directory of Open Access Journals (Sweden)

Ai-Min Wu

Full Text Available To study the morphology of the human spine and new spinal fixation methods, scientists require cadaveric specimens, which are dependent on donation. However, in most countries, the number of people willing to donate their body is low. A 3D printed model could be an alternative method for morphology research, but the accuracy of the morphology of a 3D printed model has not been determined.Forty-five computed tomography (CT scans of cervical, thoracic and lumbar spines were obtained, and 44 parameters of the cervical spine, 120 parameters of the thoracic spine, and 50 parameters of the lumbar spine were measured. The CT scan data in DICOM format were imported into Mimics software v10.01 for 3D reconstruction, and the data were saved in .STL format and imported to Cura software. After a 3D digital model was formed, it was saved in Gcode format and exported to a 3D printer for printing. After the 3D printed models were obtained, the above-referenced parameters were measured again.Paired t-tests were used to determine the significance, set to P0.800. The other ICC values were 0.600; none were <0.600.In this study, we provide a protocol for printing accurate 3D spinal models for surgeons and researchers. The resulting 3D printed model is inexpensive and easily obtained for spinal fixation research.

Comparison of inkjet-printed silver conductors on different microsystem substrates

CSIR Research Space (South Africa)

Kruger, Jene

2016-09-01

Full Text Available Applications for diagnostic and environmental point-of-need require processes and building blocks to add smart features to disposable biosensors on low-cost substrates. A novel method for producing such biosensors is printing electronics using...

Electrochemical characterisation of novel screen-printed carbon paste electrodes for voltammetric measurements

Directory of Open Access Journals (Sweden)

Sýs Milan

2017-01-01

Full Text Available This work is focused on the homemade screen-printed carbon paste electrode containing basically graphite powder (or glassy carbon powder, poly(vinylbchloride (PVC and paraffin oil. It compares the electrochemical properties of conventional carbon-based electrodes and prepared screen-printed carbon paste electrodes towards [Fe(CN6]3-/[Fe(CN6]4- and quinone/hydroquinone redox couples. Significant attention is paid to the development of the corresponding carbon inks, printing and the surface characterisation of the resulting electrodes by the scanning electron microscopy. An optimization consisted of the selection of the organic solvent, the optimal content of the used polymer with the chosen paste binder, appropriate isolation of electric contact, etc. Very similar properties of the prepared screen-printed electrodes, containing only corresponding carbon powder and 3 % PVC, with their conventional carbon paste electrode and glassy carbon-based electrodes, were observed during their characterisation. Screen-printed electrodes, with the pasting liquid usually provided satisfactory analytical data. Moreover, they can be used in the flow injection analysis and could undoubtedly replace the carbon paste grooved electrodes. It can be assumed that certain progress in the development of electrode materials was achieved by this research.

Customizing digital printing for fine art practice

Science.gov (United States)

Parraman, Carinna E.; Thirkell, Paul; Hoskins, Steve; Wang, Hong Qiang; Laidler, Paul

2005-01-01

The presentation will demonstrate how through alternative methods of digital print production the Centre for Fine Print Research (CFPR) is developing methodologies for digital printing that attempt to move beyond standard reproductive print methods. Profiling is used for input and output hardware, along with bespoke profiling for fine art printmaking papers. Examples of artist's work, and examples from the Perpetual Portfolio are included - an artist in residence scheme for selected artists wanting to work at the Centre and to make a large-format digital print. Colour is an important issue: colour fidelity, colour density on paper, colour that can be achieved through multiple-pass printing. Research is also underway to test colour shortfalls in the current inkjet ink range, and to extend colour through the use of traditional printing inks.

PRINTING TECHNIQUES: RECENT DEVELOPMENTS IN PHARMACEUTICAL TECHNOLOGY.

Science.gov (United States)

Jamroz, Witold; Kurek, Mateusz; Lyszczarz, Ewelina; Brniak, Witold; Jachowicz, Renata

2017-05-01

In the last few years there has been a huge progress in a development of printing techniques and their application in pharmaceutical sciences and particularly in the pharmaceutical technology. The variety of printing methods makes it necessary to systemize them, explain the principles of operation, and specify the possibilities of their use in pharmaceutical technology. This paper aims to review the printing techniques used in a drug development process. The growing interest in 2D and 3D printing methods results in continuously increasing number of scientific papers. Introduction of the first printed drug Spritam@ to the market seems to be a milestone of the 3D printing development. Thus, a particular aim of this review is to show the latest achievements of the researchers in the field of the printing medicines.

Teachers' Texts in Culturally Responsive Teaching

Science.gov (United States)

Kesler, Ted

2011-01-01

In this paper, the author shares three teaching stories that demonstrate the social, cultural, political, and historical factors of all texts in specific interpretive communities. The author shows how the texts that comprised his curriculum constructed particular subject positions that inevitably included some students but marginalized and…

PSYCHOLOGICAL FOUNDATIONS OF THE HISTORICAL CRITICAL PEDAGOGY AND THE FOUNDATIONS OF EDUCATIONAL OF PSYCHOLOGY HISTORICAL-CULTURAL

Directory of Open Access Journals (Sweden)

Ligia Marcia Martins

2013-12-01

Full Text Available This article presents the theoretical and methodological unity between the historical-critical pedagogy and cultural-historical psychology. It highlights, in addition to the membership of both theories to historical-dialectical materialism, the basic premises that point toward the affirmation of school education as a condition of humanization of individuals, as well as the transmission of historically systematized knowledge as one of the requirements for the achieving this purpose. In this direction, we aim to demonstrate that the historical-critical pedagogy contains, in its innerness, a solid psychological foundation, consistently built by a cultural-historical conception of man, society and educative nature that guides the relationship between them through the human vital activity, that is, through the work. It is in the core of those fundamentals that the alliance between this pedagogical theory and cultural-historical psychology is evident.

Dynamics of wetting explored with inkjet printing

Directory of Open Access Journals (Sweden)

Völkel Simeon

2017-01-01

Full Text Available An inkjet printer head, which is capable of depositing liquid droplets with a resolution of 22 picoliters and high repeatability, is employed to investigate the wetting dynamics of drops printed on a horizontal plane as well as on a granular monolayer. For a sessile drop on a horizontal plane, we characterize the contact angle hysteresis, drop volume and contact line dynamics from side view images. We show that the evaporation rate scales with the dimension of the contact line instead of the surface area of the drop. We demonstrate that the system evolves into a closed cycle upon repeating the depositing-evaporating process, owing to the high repeatability of the printing facility. Finally, we extend the investigation to a granular monolayer in order to explore the interplay between liquid deposition and granular particles.

06491 Summary -- Digital Historical Corpora- Architecture, Annotation, and Retrieval

OpenAIRE

Burnard, Lou; Dobreva, Milena; Fuhr, Norbert; Lüdeling, Anke

2007-01-01

The seminar "Digital Historical Corpora" brought together scholars from (historical) linguistics, (historical) philology, computational linguistics and computer science who work with collections of historical texts. The issues that were discussed include digitization, corpus design, corpus architecture, annotation, search, and retrieval.

The Return of Historical Fiction

Science.gov (United States)

Rycik, Mary Taylor; Rosler, Brenda

2009-01-01

Recently, historical fiction has begun to dominate major children's book awards. This article describes the values of using high-quality historical fiction in the classroom and presents different ways to respond to this genre including using modern technology. Two tables, one of picture books and one of novels, with paired nonfiction texts, are…

Two-Dimensional (2D Slices Encryption-Based Security Solution for Three-Dimensional (3D Printing Industry

Directory of Open Access Journals (Sweden)

Giao N. Pham

2018-05-01

Full Text Available Nowadays, three-dimensional (3D printing technology is applied to many areas of life and changes the world based on the creation of complex structures and shapes that were not feasible in the past. But, the data of 3D printing is often attacked in the storage and transmission processes. Therefore, 3D printing must be ensured security in the manufacturing process, especially the data of 3D printing to prevent attacks from hackers. This paper presents a security solution for 3D printing based on two-dimensional (2D slices encryption. The 2D slices of 3D printing data is encrypted in the frequency domain or in the spatial domain by the secret key to generate the encrypted data of 3D printing. We implemented the proposed solution in both the frequency domain based on the Discrete Cosine Transform and the spatial domain based on geometric transform. The entire 2D slices of 3D printing data is altered and secured after the encryption process. The proposed solution is responsive to the security requirements for the secured storage and transmission. Experimental results also verified that the proposed solution is effective to 3D printing data and is independent on the format of 3D printing models. When compared to the conventional works, the security and performance of the proposed solution is also better.

3D-printed Bioanalytical Devices

Science.gov (United States)

Bishop, Gregory W; Satterwhite-Warden, Jennifer E; Kadimisetty, Karteek; Rusling, James F

2016-01-01

While 3D printing technologies first appeared in the 1980s, prohibitive costs, limited materials, and the relatively small number of commercially available printers confined applications mainly to prototyping for manufacturing purposes. As technologies, printer cost, materials, and accessibility continue to improve, 3D printing has found widespread implementation in research and development in many disciplines due to ease-of-use and relatively fast design-to-object workflow. Several 3D printing techniques have been used to prepare devices such as milli- and microfluidic flow cells for analyses of cells and biomolecules as well as interfaces that enable bioanalytical measurements using cellphones. This review focuses on preparation and applications of 3D-printed bioanalytical devices. PMID:27250897

Printing and civilization; Insatsu to bunmei

Energy Technology Data Exchange (ETDEWEB)

Takahashi, T. [Dainippon Ink and Chemicals Inc., Tokyo (Japan)

1995-01-01

It can be said that the printing has not been only a barometer of culture, but also has formed a foundation of culture as the facilities of civilization, and has shouldered a role to drag the culture. In modern nation, that the freedom of speech and press has been clearly pointed out as the fundamental human right, shows straightforwardly an important significance of such a printing. Though it is also statistically clear that there is an exact relation between GNP and printed materials per capita, in this paper centering around the examples in Japan, a relation between the printing and civilization/culture is introduced like the episodes. It does not yet become definite that what kind of influence a proposition so called `printing is a barometer of culture` is affected by the information/communication revolution which is regarded to be advanced very rapidly. However, speaking conclusively it can not be thought that a demand for the printing which can produce the information in a great deal of quantity with a low cost, and for the printing which does not need special output terminal and is excellent in portability and glance ability, may largely be reduced. 1 fig.

Text and graphics: manipulating nutrition brochures to maximize recall.

Science.gov (United States)

Clark, K L; AbuSabha, R; von Eye, A; Achterberg, C

1999-08-01

This study examined how altering text and graphics of a nutrition brochure could affect the ability to remember the content of the message. Two theoretical models were used to guide alterations: dual-coding theory and the communications model. Three brochure formats were tested: the original brochure containing abstract text and abstract graphics, a modified brochure with relatively concrete text and abstract graphics, and a relatively concrete text brochure with concrete graphics. Participants (N = 239 women) were divided into four age groups: 20-30, 40-50, 60-70 and over 70 years. Women were randomly assigned into each of the three experimental brochure formats or a control group. Participants completed recalled materials from the assigned brochures (the no treatment control group did not include a brochure) at two different sessions, 30 days apart. Data were content analyzed and results were compared using analysis of covariance to test differences by age and brochure types. Younger women (20-30 and 40-50 years) recalled more information than women over 60 years. More concrete nutrition education print materials enhanced recall of information presented immediately after reading the material; however, this effect was transient and lasted less than 30 days after a one-time reading. The implications of these data for communicating nutrition messages with print materials are discussed.

Principles Of Researching In The Historical Places

Directory of Open Access Journals (Sweden)

Mamatmusaev Tokhir Shaydulovich

2015-08-01

Full Text Available This article is dedicated to researches of historical places also are seen the special phrases used in town planning and architecture component of historical cities historical framework linear system and the significance of centers in the development of cities also researches of dwellings which are the basic component of cities.

Natural fibre composites for 3D Printing

OpenAIRE

Pandey, Kapil

2015-01-01

3D printing has been common option for prototyping. Not all the materials are suitable for 3D printing. Various studies have been done and still many are ongoing regarding the suitability of the materials for 3D printing. This thesis work discloses the possibility of 3D printing of certain polymer composite materials. The main objective of this thesis work was to study the possibility for 3D printing the polymer composite material composed of natural fibre composite and various different ...

Active materials by four-dimension printing

Science.gov (United States)

Ge, Qi; Qi, H. Jerry; Dunn, Martin L.

2013-09-01

We advance a paradigm of printed active composite materials realized by directly printing glassy shape memory polymer fibers in an elastomeric matrix. We imbue the active composites with intelligence via a programmed lamina and laminate architecture and a subsequent thermomechanical training process. The initial configuration is created by three-dimension (3D) printing, and then the programmed action of the shape memory fibers creates time dependence of the configuration—the four-dimension (4D) aspect. We design and print laminates in thin plate form that can be thermomechanically programmed to assume complex three-dimensional configurations including bent, coiled, and twisted strips, folded shapes, and complex contoured shapes with nonuniform, spatially varying curvature. The original flat plate shape can be recovered by heating the material again. We also show how the printed active composites can be directly integrated with other printed functionalities to create devices; here we demonstrate this by creating a structure that can assemble itself.

Printing versus coating - What will be the future production technology for printed electronics?

Energy Technology Data Exchange (ETDEWEB)

Glawe, Andrea; Eggerath, Daniel; Schäfer, Frank [KROENERT GmbH and Co KG, Schuetzenstrasse 105, 22761 Hamburg (Germany)

2015-02-17

The market of Large Area Organic Printed Electronics is developing rapidly to increase efficiency and quality as well as to lower costs further. Applications for OPV, OLED, RFID and compact Printed Electronic systems are increasing. In order to make the final products more affordable, but at the same time highly accurate, Roll to Roll (R2R) production on flexible transparent polymer substrates is the way forward. There are numerous printing and coating technologies suitable depending on the design, the product application and the chemical process technology. Mainly the product design (size, pattern, repeatability) defines the application technology.

PEMBERDAYAAN MASYARAKAT KEPULAUAN TALANGO KABUPATEN SUMENEP MELALUI USAHA PERCETAKAN DAN SABLON DIGITAL PRINTING

Directory of Open Access Journals (Sweden)

Budi Dwi Satoto

2014-08-01

Full Text Available The role of youth in development is very important because it is considered to be in the productive age to support various development activities in various sectors. Most youth can be absorbed in the labor market, and partly eliminated from the competition and become a static group. Not a few who engage in the business world ranging from the small to large, one form of business that is highly demanded by the youth is the Small and Medium Enterprises and Silk Screen Printing. However, the form of efforts among youth most still use manual design and printing due to lack of capital and expertise. With this activity, try to solve them with IBM is working with partners Silk Screen Printing Industry centers in villages Talango, Talango islands, Sumenep, Disperindag and local cooperative activities such as application of digital printing techniques, the design theme oflocal wisdom Madura images with coloror multi color mono color and entrepreneurship training and business management. IBM activity was done in the form of training, coaching and mentoring the youth group field of screen printing and printing for souvenirs and handicrafts which aims to: 1 increase the motivation of entrepreneurial partners; 2 improve the understanding of partner business planning and business management; 3 improve human resource capabilities in the production and marketing techniques; 4 develop a network to support youth entrepreneurship development of the creative economy. Youth empowerment group is expected to produce a model that can be used as a model youth entrepreneurial development youth empowerment-based society.Keywords: training, coaching, mentoring, printingandscreen printing, digital printing

READ-EVAL-PRINT in Parallel and Asynchronous Proof-checking

Directory of Open Access Journals (Sweden)

Makarius Wenzel

2013-07-01

Full Text Available The LCF tradition of interactive theorem proving, which was started by Milner in the 1970-ies, appears to be tied to the classic READ-EVAL-PRINT-LOOP of sequential and synchronous evaluation of prover commands. We break up this loop and retrofit the read-eval-print phases into a model of parallel and asynchronous proof processing. Thus we explain some key concepts of the Isabelle/Scala approach to prover interaction and integration, and the Isabelle/jEdit Prover IDE as front-end technology. We hope to open up the scientific discussion about non-trivial interaction models for ITP systems again, and help getting other old-school proof assistants on a similar track.

Disposable Screen Printed Electrochemical Sensors: Tools for Environmental Monitoring

Directory of Open Access Journals (Sweden)

Akhtar Hayat

2014-06-01

Full Text Available Screen printing technology is a widely used technique for the fabrication of electrochemical sensors. This methodology is likely to underpin the progressive drive towards miniaturized, sensitive and portable devices, and has already established its route from “lab-to-market” for a plethora of sensors. The application of these sensors for analysis of environmental samples has been the major focus of research in this field. As a consequence, this work will focus on recent important advances in the design and fabrication of disposable screen printed sensors for the electrochemical detection of environmental contaminants. Special emphasis is given on sensor fabrication methodology, operating details and performance characteristics for environmental applications.

Detection of latent prints by Raman imaging

Science.gov (United States)

Lewis, Linda Anne [Andersonville, TN; Connatser, Raynella Magdalene [Knoxville, TN; Lewis, Sr., Samuel Arthur

2011-01-11

The present invention relates to a method for detecting a print on a surface, the method comprising: (a) contacting the print with a Raman surface-enhancing agent to produce a Raman-enhanced print; and (b) detecting the Raman-enhanced print using a Raman spectroscopic method. The invention is particularly directed to the imaging of latent fingerprints.

Colour print workflow and methods for multilayering of colour and decorative inks using UV inkjet for fine art printing

Science.gov (United States)

Parraman, Carinna

2012-01-01

In order to increase density of colour and improve ink coverage when printing onto a range of non standard substrates, this paper will present research into multi-layering of colour and the appearance of colour at 'n' levels of ink coverage. Returning to our original investigation of artist's requirements when making inkjet prints, these observations are based on empirical approaches that address the need to present physical data that is more useful and meaningful to the designer. The study has used multi-pass printed colour charts to measure colour and to provide users with an understanding at a soft-preview level to demonstrate the appearance of printed colour on different substrates. Test results relating to the appearance of print on different surfaces, and a series of case studies will be presented using recent research into the capabilities of UV printing technology, which has widened the opportunities for the designer to print onto non-standard materials. It will also present a study into layering of greys and gloss in order to improve the appearance of printed images onto metal.

Biosensing with Paper-Based Miniaturized Printed Electrodes–A Modern Trend

Directory of Open Access Journals (Sweden)

Célia M. Silveira

2016-09-01

Full Text Available From the bench-mark work on microfluidics from the Whitesides’s group in 2007, paper technology has experienced significant growth, particularly regarding applications in biomedical research and clinical diagnostics. Besides the structural properties supporting microfluidics, other advantageous features of paper materials, including their versatility, disposability and low cost, show off the great potential for the development of advanced and eco-friendly analytical tools. Consequently, paper was quickly employed in the field of electrochemical sensors, being an ideal material for producing custom, tailored and miniaturized devices. Stencil-, inkjet-, or screen-printing are the preferential techniques for electrode manufacturing. Not surprisingly, we witnessed a rapid increase in the number of publications on paper based screen-printed sensors at the turn of the past decade. Among the sensing strategies, various biosensors, coupling electrochemical detectors with biomolecules, have been proposed. This work provides a critical review and a discussion on the future progress of paper technology in the context of miniaturized printed electrochemical biosensors.

Three-dimensional printing in surgical planning: A case of aortopulmonary window with interrupted aortic arch

Directory of Open Access Journals (Sweden)

Ryan A Moore

2018-01-01

Full Text Available Better anatomical understanding and conceptualization of complex congenital heart defects using three-dimensional (3D printing may improve surgical planning, especially in rare defects. In this report, we utilized 3D printing to delineate the exact cardiac anatomy of a neonate with an aortopulmonary window associated with interrupted aortic arch to devise a novel approach to the repair.

Experimental Study on Inkjet-Printed Passive UHF RFID Tags on Versatile Paper-Based Substrates

Directory of Open Access Journals (Sweden)

Han He

2016-01-01

Full Text Available We present the possibilities and challenges of passive UHF RFID tag antennas manufactured by inkjet printing silver nanoparticle ink on versatile paper-based substrates. The most efficient manufacturing parameters, such as the pattern resolution, were determined and the optimal number of printed layers was evaluated for each substrate material. Next, inkjet-printed passive UHF RFID tags were fabricated on each substrate with the optimized parameters and number of layers. According to our measurements, the tags on different paper substrates showed peak read ranges of 4–6.5 meters and the tags on different cardboard substrates exhibited peak read ranges of 2–6 meters. Based on their wireless performance, these inkjet-printed paper-based passive UHF RFID tags are sufficient for many future wireless applications and comparable to tags fabricated on more traditional substrates, such as polyimide.

Ultra-Wideband Printed Slot Radiators with Controllable Frequency Characteristics

Directory of Open Access Journals (Sweden)

S. L. Chernyshev

2015-01-01

Full Text Available We have studied the possibility of creating ultra-wideband (UWB antennas with controlled frequency response of matching based on the printed slot antenna Vivaldi by introducing controlled resonators directly into the structure of the radiator. In the area of irregular slotline there are printed switched resonators with variable capacitance (varactor model, which allow tuning the frequency characteristics for each state of switching cavities, providing bandpass and band-barrage properties of the antenna. The investigation of reconfigurable printed resonators in the system of reconfigurable resonators of a bandpass filter is conducted. The paper considers filter to provide restructuring in the band (3-9 GHz. Electrodynamic simulation of the device was carried out in the time domain using a finite integration method. A bandstop reconfigurable filter is also investigated. The filter located on the substrate opposite the slit is based on tunable L-shaped resonator that has one end connected to the short-circuitor through the board metallization; the other end remains open and is brought into the region of interaction with the slotline. Such filter provides an effective narrow-band suppression and can be easily tuned to the desired frequency channel. The combination of these two types of filters allows you to create a controlled print Vivaldi slot antenna with combined properties. The paper investigates parameters of the scattering and radiation pattern of the antenna in different modes.

Electroanalytical Sensing of Flunitrazepam Based on Screen Printed Graphene Electrodes

Directory of Open Access Journals (Sweden)

Enriqueta Garcia-Gutierrez

2013-12-01

Full Text Available We present a new electrochemical sensor for Flunitrazepam using disposable and economic Screen Printed Graphene Electrodes. It was found that the electrochemical response of this sensor was improved compared to Screen Printed Graphite Electrodes and displayed an excellent analytical performance for the detection of Flunitrazepam. Those characteristics could be attributed to the high Flunitrazepam loading capacity on the electrode surface and the outstanding electric conductivity of graphene. The methodology is shown to be useful for quantifying low levels of Flunitrazepam in a buffer solution. The protocol is also shown to be applicable for the sensing of Flunitrazepam in an alcoholic beverage e.g., Gordon’s Gin & Tonic.

Reprocessable thermosets for sustainable three-dimensional printing.

Science.gov (United States)

Zhang, Biao; Kowsari, Kavin; Serjouei, Ahmad; Dunn, Martin L; Ge, Qi

2018-05-08

Among all three-dimensional (3D) printing materials, thermosetting photopolymers claim almost half of the market, and have been widely used in various fields owing to their superior mechanical stability at high temperatures, excellent chemical resistance as well as good compatibility with high-resolution 3D printing technologies. However, once these thermosetting photopolymers form 3D parts through photopolymerization, the covalent networks are permanent and cannot be reprocessed, i.e., reshaped, repaired, or recycled. Here, we report a two-step polymerization strategy to develop 3D printing reprocessable thermosets (3DPRTs) that allow users to reform a printed 3D structure into a new arbitrary shape, repair a broken part by simply 3D printing new material on the damaged site, and recycle unwanted printed parts so the material can be reused for other applications. These 3DPRTs provide a practical solution to address environmental challenges associated with the rapid increase in consumption of 3D printing materials.

Print like an Egyptian.

Science.gov (United States)

Weisensee, Marilyn

1990-01-01

Describes a relief printmaking unit for sixth graders with the objective of decorating the inside of a pyramid. Ancient Egyptian imagery was used to help students become familiar with the style. Students designed and printed linoleum prints in different colors. They then critiqued their work and made their selection for the pyramid. (KM)

Development of tactile floor plan for the blind and the visually impaired by 3D printing technique

Directory of Open Access Journals (Sweden)

Raša Urbas

2016-07-01

Full Text Available The aim of the research was to produce tactile floor plans for blind and visually impaired people for the use in the museum. For the production of tactile floor plans 3D printing technique was selected among three different techniques. 3D prints were made of white and colored ABS polymer materials. Development of different elements of tactile floor plans, as well as the problems and the solutions during 3D printing, are described in the paper.

Medical 3D Printing for the Radiologist

Science.gov (United States)

Mitsouras, Dimitris; Liacouras, Peter; Imanzadeh, Amir; Giannopoulos, Andreas A.; Cai, Tianrun; Kumamaru, Kanako K.; George, Elizabeth; Wake, Nicole; Caterson, Edward J.; Pomahac, Bohdan; Ho, Vincent B.; Grant, Gerald T.

2015-01-01

While use of advanced visualization in radiology is instrumental in diagnosis and communication with referring clinicians, there is an unmet need to render Digital Imaging and Communications in Medicine (DICOM) images as three-dimensional (3D) printed models capable of providing both tactile feedback and tangible depth information about anatomic and pathologic states. Three-dimensional printed models, already entrenched in the nonmedical sciences, are rapidly being embraced in medicine as well as in the lay community. Incorporating 3D printing from images generated and interpreted by radiologists presents particular challenges, including training, materials and equipment, and guidelines. The overall costs of a 3D printing laboratory must be balanced by the clinical benefits. It is expected that the number of 3D-printed models generated from DICOM images for planning interventions and fabricating implants will grow exponentially. Radiologists should at a minimum be familiar with 3D printing as it relates to their field, including types of 3D printing technologies and materials used to create 3D-printed anatomic models, published applications of models to date, and clinical benefits in radiology. Online supplemental material is available for this article. ©RSNA, 2015 PMID:26562233

Medical 3D Printing for the Radiologist.

Science.gov (United States)

Mitsouras, Dimitris; Liacouras, Peter; Imanzadeh, Amir; Giannopoulos, Andreas A; Cai, Tianrun; Kumamaru, Kanako K; George, Elizabeth; Wake, Nicole; Caterson, Edward J; Pomahac, Bohdan; Ho, Vincent B; Grant, Gerald T; Rybicki, Frank J

2015-01-01

While use of advanced visualization in radiology is instrumental in diagnosis and communication with referring clinicians, there is an unmet need to render Digital Imaging and Communications in Medicine (DICOM) images as three-dimensional (3D) printed models capable of providing both tactile feedback and tangible depth information about anatomic and pathologic states. Three-dimensional printed models, already entrenched in the nonmedical sciences, are rapidly being embraced in medicine as well as in the lay community. Incorporating 3D printing from images generated and interpreted by radiologists presents particular challenges, including training, materials and equipment, and guidelines. The overall costs of a 3D printing laboratory must be balanced by the clinical benefits. It is expected that the number of 3D-printed models generated from DICOM images for planning interventions and fabricating implants will grow exponentially. Radiologists should at a minimum be familiar with 3D printing as it relates to their field, including types of 3D printing technologies and materials used to create 3D-printed anatomic models, published applications of models to date, and clinical benefits in radiology. Online supplemental material is available for this article. (©)RSNA, 2015.

Application of 3D Printing in the Surgical Planning of Trimalleolar Fracture and Doctor-Patient Communication

Directory of Open Access Journals (Sweden)

Long Yang

2016-01-01

Full Text Available To evaluate the effect of 3D printing in treating trimalleolar fractures and its roles in physician-patient communication, thirty patients with trimalleolar fractures were randomly divided into the 3D printing assisted-design operation group (Group A and the no-3D printing assisted-design group (Group B. In Group A, 3D printing was used by the surgeons to produce a prototype of the actual fracture to guide the surgical treatment. All patients underwent open reduction and internal fixation. A questionnaire was designed for doctors and patients to verify the verisimilitude and effectiveness of the 3D-printed prototype. Meanwhile, the operation time and the intraoperative blood loss were compared between the two groups. The fracture prototypes were accurately printed, and the average overall score of the verisimilitude and effectiveness of the 3D-printed prototypes was relatively high. Both the operation time and the intraoperative blood loss in Group A were less than those in Group B (P<0.05. Patient satisfaction using the 3D-printed prototype and the communication score were 9.3±0.6 points. A 3D-printed prototype can faithfully reflect the anatomy of the fracture site; it can effectively help the doctors plan the operation and represent an effective tool for physician-patient communication.

All-printed capacitors with continuous solution dispensing technology

Science.gov (United States)

Ge, Yang; Plötner, Matthias; Berndt, Andreas; Kumar, Amit; Voit, Brigitte; Pospiech, Doris; Fischer, Wolf-Joachim

2017-09-01

Printed electronics have been introduced into the commercial markets in recent years. Various printing technologies have emerged aiming to process printed electronic devices with low cost, environmental friendliness, and compatibility with large areas and flexible substrates. The aim of this study is to propose a continuous solution dispensing technology for processing all-printed thin-film capacitors on glass substrates using a leading-edge printing instrument. Among all printing technologies, this study provides concrete proof of the following outstanding advantages of this technology: high tolerance to inks, high throughput, low cost, and precise pattern transfers. Ag nanoparticle ink based on glycol ethers was used to print the electrodes. To obtain dielectric ink, a copolymer powder of poly(methyl methacrylate-co-benzoylphenyl methacrylate) containing crosslinkable side groups was dissolved in anisole. Various layouts were designed to support multiple electronic applications. Scanning electron microscopy and atomic force microscopy were used to investigate the all-printed capacitor layers formed using the proposed process. Additionally, the printed capacitors were electrically characterized under direct current and alternating current. The measured electrical properties of the printed capacitors were consistent with the theoretical results.

Influence of Parameters of a Printing Plate on Photoluminescence of Nano photonic Printed Elements of Novel Packaging

International Nuclear Information System (INIS)

Sarapulova, O.; Sherstiuk, V.

2015-01-01

In order to produce nano photonic elements for smart packaging, we investigated the influence of the parameters of screen and offset gravure printing plates on features of printed application of coatings with nano photonic components and on parameters of their photoluminescence. To determine the dependence of luminescence intensity on the thickness of solid coating, we carried out the formation of nano photonic solid surfaces by means of screen printing with different layer thickness on polypropylene film. The obtained analytical dependencies were used to confirm the explanation of the processes that occur during the fabrication of nano photonic coverings with offset gravure printing plates. As a result of experimental studies, it was determined that the different character of the dependency of total luminescence intensity of nano photonic elements from the percentage of a pad is explained by the use of different types of offset gravure printing plates, where the size of raster points remains constant in one case and changes in the other case, while the depth of the printing elements accordingly changes or remains constant. To obtain nano photonic areas with predetermined photo luminescent properties, the influence of investigated factors on changes of photo luminescent properties of nano photonic printed surfaces should be taken into consideration

ACCOUNTING HARMONIZATION AND HISTORICAL COST ACCOUNTING

Directory of Open Access Journals (Sweden)

Valentin Gabriel CRISTEA

2017-05-01

Full Text Available There is a huge interest in accounting harmonization and historical costs accounting, in what they offer us. In this article, different valuation models are discussed. Although one notices the movement from historical cost accounting to fair value accounting, each one has its advantages.

Experiments on Printed Intelligence and Its Applications

OpenAIRE

Barbonelova, Angelina

2015-01-01

Printed intelligence technology refers to products and systems that are produced using traditional printing methods and that are able to communicate or react with the user, environment or other products and systems. The technology provides the foundations of innovative products such as printed OLEDs (organic light emitting device), electroluminescent displays, organic photovoltaics, thin film batteries and disposable sensors. This study presents research on different printing techniques i...

The early printed Books of Hours in the Grey Collection in Cape Town: evidence of an information revolution

Directory of Open Access Journals (Sweden)

F C Steyn

2014-11-01

Full Text Available Printed books of hours, the best-seller of the late medieval trade in books, provide evidence of an information revolution equal to that occasioned by the Internet today. The Grey Collection of the National Library in Cape Town possesses eight books of hours, printed between 1498 and 1530, and they are almost completely unknown. Yet these valuable incunabula, all of them printed on vellum with hand-painted initials, and some of them with hand-painted miniatures, are of importance to anybody interested in books, the history of the book, the dissemination of information, the art of the late 15th to the early 16th centuries and early printing. They are also religious books, and of value to people interested in that discipline. The books are therefore eminently suitable as subjects for transdisciplinary research through which the subjects of history, sociology, art and religion can be drawn together. Two of these books, printed by Thielman Kerver in Paris, are discussed in detail in this article. The books are especially remarkable for their many illustrations that include pictures around the borders of each page as well as full-page illustrations. The pictures are neither metal cuts nor woodcuts, as were usual in that period, but relief prints. The most important part of the texts is a sequence of prayers to the Virgin Mary. Soon after these books were printed , in 1571, Pope Pius V prohibited the use of all existing books of hours.

In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures

Directory of Open Access Journals (Sweden)

Erika Fantino

2016-07-01

Full Text Available Polymer nanocomposites have always attracted the interest of researchers and industry because of their potential combination of properties from both the nanofillers and the hosting matrix. Gathering nanomaterials and 3D printing could offer clear advantages and numerous new opportunities in several application fields. Embedding nanofillers in a polymeric matrix could improve the final material properties but usually the printing process gets more difficult. Considering this drawback, in this paper we propose a method to obtain polymer nanocomposites by in situ generation of nanoparticles after the printing process. 3D structures were fabricated through a Digital Light Processing (DLP system by disolving metal salts in the starting liquid formulation. The 3D fabrication is followed by a thermal treatment in order to induce in situ generation of metal nanoparticles (NPs in the polymer matrix. Comprehensive studies were systematically performed on the thermo-mechanical characteristics, morphology and electrical properties of the 3D printed nanocomposites.

Integrating integrated circuit chips on paper substrates using inkjet printed electronics

CSIR Research Space (South Africa)

Bezuidenhout, Petrone H

2016-11-01

Full Text Available This paper investigates the integration of silicon and paper substrates using rapid prototyping inkjet printed electronics. Various Dimatix DMP-2831 material printer settings and adhesives are investigated. The aim is to robustly and effectively...

3D Printing of Thermo-Responsive Methylcellulose Hydrogels for Cell-Sheet Engineering

Directory of Open Access Journals (Sweden)

Andrea Cochis

2018-04-01

Full Text Available A possible strategy in regenerative medicine is cell-sheet engineering (CSE, i.e., developing smart cell culture surfaces from which to obtain intact cell sheets (CS. The main goal of this study was to develop 3D printing via extrusion-based bioprinting of methylcellulose (MC-based hydrogels. Hydrogels were prepared by mixing MC powder in saline solutions (Na2SO4 and PBS. MC-based hydrogels were analyzed to investigate the rheological behavior and thus optimize the printing process parameters. Cells were tested in vitro on ring-shaped printed hydrogels; bulk MC hydrogels were used for comparison. In vitro tests used murine embryonic fibroblasts (NIH/3T3 and endothelial murine cells (MS1, and the resulting cell sheets were characterized analyzing cell viability and immunofluorescence. In terms of CS preparation, 3D printing proved to be an optimal approach to obtain ring-shaped CS. Cell orientation was observed for the ring-shaped CS and was confirmed by the degree of circularity of their nuclei: cell nuclei in ring-shaped CS were more elongated than those in sheets detached from bulk hydrogels. The 3D printing process appears adequate for the preparation of cell sheets of different shapes for the regeneration of complex tissues.

Future of printing: changes and challenges, technologies and markets

Science.gov (United States)

Kipphan, Helmut

1998-01-01

Digitalization within the graphic arts industry is described and it is explained how it is improving and changing the print production strategies and which new kinds of print production systems are developed or can be expected. The relationship of printed media and electronic media is analyzed and a positioning for the next century is given. The state of the art of conventional printing technologies, especially using direct imagine techniques, and their position within the digital workflow are shortly described. Non-impact printing multicolor printing systems are explained, based on general design criteria and linked to existing and newly announced equipment. The use of high-tech components for building up successful systems with high reliability, high quality and low production costs is included with some examples. Digital printing systems open many opportunities in print production: distributed printing, personalization, print and book on demand are explained as examples. The overview of the several printing technologies and their positioning regarding quality and productivity leads to the scenario about the important position of printed media, also in the distant future.

Functional electronic screen printing – electroluminescent smart fabric watch

OpenAIRE

de Vos, Marc; Torah, Russel; Beeby, Steve; Tudor, John

2013-01-01

Motivation for screen printed smart fabrics.Introduce functional electronic screen printing on fabrics.Printed smart fabric watch design.Printing process for electroluminescent watch.Demonstration video.Conclusions and further work.Examples of other screen printed smart fabrics.

Contextual advertisement placement in printed media

Science.gov (United States)

Liu, Sam; Joshi, Parag

2010-02-01

Advertisements today provide the necessary revenue model supporting the WWW ecosystem. Targeted or contextual ad insertion plays an important role in optimizing the financial return of this model. Nearly all the current ads that appear on web sites are geared for display purposes such as banner and "pay-per-click". Little attention, however, is focused on deriving additional ad revenues when the content is repurposed for alternative mean of presentation, e.g. being printed. Although more and more content is moving to the Web, there are still many occasions where printed output of web content is desirable, such as maps and articles; thus printed ad insertion can potentially be lucrative. In this paper, we describe a contextual ad insertion network aimed to realize new revenue for print service providers for web printing. We introduce a cloud print service that enables contextual ads insertion, with respect to the main web page content, when a printout of the page is requested. To encourage service utilization, it would provide higher quality printouts than what is possible from current browser print drivers, which generally produce poor outputs, e.g. ill formatted pages. At this juncture we will limit the scope to only article-related web pages although the concept can be extended to arbitrary web pages. The key components of this system include (1) the extraction of article from web pages, (2) the extraction of semantics from article, (3) querying the ad database for matching advertisement or coupon, and (4) joint content and ad layout for print outputs.

Avionics Systems Laboratory/Building 16. Historical Documentation

Science.gov (United States)

Slovinac, Patricia; Deming, Joan

2011-01-01

As part of this nation-wide study, in September 2006, historical survey and evaluation of NASA-owned and managed facilities that was conducted by NASA s Lyndon B. Johnson Space Center (JSC) in Houston, Texas. The results of this study are presented in a report entitled, "Survey and Evaluation of NASA-owned Historic Facilities and Properties in the Context of the U.S. Space Shuttle Program, Lyndon B. Johnson Space Center, Houston, Texas," prepared in November 2007 by NASA JSC s contractor, Archaeological Consultants, Inc. As a result of this survey, the Avionics Systems Laboratory (Building 16) was determined eligible for listing in the NRHP, with concurrence by the Texas State Historic Preservation Officer (SHPO). The survey concluded that Building 5 is eligible for the NRHP under Criteria A and C in the context of the U.S. Space Shuttle program (1969-2010). Because it has achieved significance within the past 50 years, Criteria Consideration G applies. At the time of this documentation, Building 16 was still used to support the SSP as an engineering research facility, which is also sometimes used for astronaut training. This documentation package precedes any undertaking as defined by Section 106 of the NHPA, as amended, and implemented in 36 CFR Part 800, as NASA JSC has decided to proactively pursue efforts to mitigate the potential adverse affects of any future modifications to the facility. It includes a historical summary of the Space Shuttle program; the history of JSC in relation to the SSP; a narrative of the history of Building 16 and how it supported the SSP; and a physical description of the structure. In addition, photographs documenting the construction and historical use of Building 16 in support of the SSP, as well as photographs of the facility documenting the existing conditions, special technological features, and engineering details, are included. A contact sheet printed on archival paper, and an electronic copy of the work product on CD, are

A 3D Printing Model Watermarking Algorithm Based on 3D Slicing and Feature Points

Directory of Open Access Journals (Sweden)

Giao N. Pham

2018-02-01

Full Text Available With the increase of three-dimensional (3D printing applications in many areas of life, a large amount of 3D printing data is copied, shared, and used several times without any permission from the original providers. Therefore, copyright protection and ownership identification for 3D printing data in communications or commercial transactions are practical issues. This paper presents a novel watermarking algorithm for 3D printing models based on embedding watermark data into the feature points of a 3D printing model. Feature points are determined and computed by the 3D slicing process along the Z axis of a 3D printing model. The watermark data is embedded into a feature point of a 3D printing model by changing the vector length of the feature point in OXY space based on the reference length. The x and y coordinates of the feature point will be then changed according to the changed vector length that has been embedded with a watermark. Experimental results verified that the proposed algorithm is invisible and robust to geometric attacks, such as rotation, scaling, and translation. The proposed algorithm provides a better method than the conventional works, and the accuracy of the proposed algorithm is much higher than previous methods.

Impact of the Fused Deposition (FDM Printing Process on Polylactic Acid (PLA Chemistry and Structure

Directory of Open Access Journals (Sweden)

Michael Arthur Cuiffo

2017-06-01

Full Text Available Polylactic acid (PLA is an organic polymer commonly used in fused deposition (FDM printing and biomedical scaffolding that is biocompatible and immunologically inert. However, variations in source material quality and chemistry make it necessary to characterize the filament and determine potential changes in chemistry occurring as a result of the FDM process. We used several spectroscopic techniques, including laser confocal microscopy, Fourier transform infrared (FTIR spectroscopy and photoacousitc FTIR spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS in order to characterize both the bulk and surface chemistry of the source material and printed samples. Scanning electron microscopy (SEM and differential scanning calorimetry (DSC were used to characterize morphology, cold crystallinity, and the glass transition and melting temperatures following printing. Analysis revealed calcium carbonate-based additives which were reacted with organic ligands and potentially trace metal impurities, both before and following printing. These additives became concentrated in voids in the printed structure. This finding is important for biomedical applications as carbonate will impact subsequent cell growth on printed tissue scaffolds. Results of chemical analysis also provided evidence of the hygroscopic nature of the source material and oxidation of the printed surface, and SEM imaging revealed micro- and submicron-scale roughness that will also impact potential applications.

Experimental studies on 3D printing of barium titanate ceramics for medical applications

Directory of Open Access Journals (Sweden)

Schult Mark

2016-09-01

Full Text Available The present work deals with the 3D printing of porous barium titanate ceramics. Barium titanate is a biocompatible material with piezoelectric properties. Due to insufficient flowability of the starting material for 3D printing, the barium titanate raw material has been modified in three different ways. Firstly, barium titanate powder has been calcined. Secondly, flow additives have been added to the powder. And thirdly, flow additives have been added to the calcined powder. Finally, a polymer has been added to the three materials and specimens have been printed from these three material mixtures. The 3D printed parts were then sintered at 1320°C. The sintering leads to shrinkage which differs between 29.51–71.53% for the tested material mixtures. The porosity of the parts is beneficial for cell growth which is relevant for future medical applications. The results reported in this study demonstrate the possibility to fabricate porous piezoelectric barium titanate parts with a 3D printer that can be used for medical applications. 3D printed porous barium titanate ceramics can especially be used as scaffold for bone tissue engineering, where the bone formation can be promoted by electrical stimulation.

All-printed paper memory

KAUST Repository

Lien, Derhsien

2014-08-26

We report the memory device on paper by means of an all-printing approach. Using a sequence of inkjet and screen-printing techniques, a simple metal-insulator-metal device structure is fabricated on paper as a resistive random access memory with a potential to reach gigabyte capacities on an A4 paper. The printed-paper-based memory devices (PPMDs) exhibit reproducible switching endurance, reliable retention, tunable memory window, and the capability to operate under extreme bending conditions. In addition, the PBMD can be labeled on electronics or living objects for multifunctional, wearable, on-skin, and biocompatible applications. The disposability and the high-security data storage of the paper-based memory are also demonstrated to show the ease of data handling, which are not achievable for regular silicon-based electronic devices. We envision that the PPMDs manufactured by this cost-effective and time-efficient all-printing approach would be a key electronic component to fully activate a paper-based circuit and can be directly implemented in medical biosensors, multifunctional devices, and self-powered systems. © 2014 American Chemical Society.

Clinical efficacy and effectiveness of 3D printing: a systematic review.

Science.gov (United States)

Diment, Laura E; Thompson, Mark S; Bergmann, Jeroen H M

2017-12-21

To evaluate the clinical efficacy and effectiveness of using 3D printing to develop medical devices across all medical fields. Systematic review compliant with Preferred Reporting Items for Systematic Reviews and Meta-Analyses. PubMed, Web of Science, OVID, IEEE Xplore and Google Scholar. A double-blinded review method was used to select all abstracts up to January 2017 that reported on clinical trials of a three-dimensional (3D)-printed medical device. The studies were ranked according to their level of evidence, divided into medical fields based on the International Classification of Diseases chapter divisions and categorised into whether they were used for preoperative planning, aiding surgery or therapy. The Downs and Black Quality Index critical appraisal tool was used to assess the quality of reporting, external validity, risk of bias, risk of confounding and power of each study. Of the 3084 abstracts screened, 350 studies met the inclusion criteria. Oral and maxillofacial surgery contained 58.3% of studies, and 23.7% covered the musculoskeletal system. Only 21 studies were randomised controlled trials (RCTs), and all fitted within these two fields. The majority of RCTs were 3D-printed anatomical models for preoperative planning and guides for aiding surgery. The main benefits of these devices were decreased surgical operation times and increased surgical accuracy. All medical fields that assessed 3D-printed devices concluded that they were clinically effective. The fields that most rigorously assessed 3D-printed devices were oral and maxillofacial surgery and the musculoskeletal system, both of which concluded that the 3D-printed devices outperformed their conventional comparators. However, the efficacy and effectiveness of 3D-printed devices remain undetermined for the majority of medical fields. 3D-printed devices can play an important role in healthcare, but more rigorous and long-term assessments are needed to determine if 3D-printed devices are

3D metal droplet printing development and advanced materials additive manufacturing

Directory of Open Access Journals (Sweden)

Lawrence E. Murr

2017-01-01

Full Text Available While commercial additive manufacturing processes involving direct metal wire or powder deposition along with powder bed fusion technologies using laser and electron beam melting have proliferated over the past decade, inkjet printing using molten metal droplets for direct, 3D printing has been elusive. In this paper we review the more than three decades of development of metal droplet generation for precision additive manufacturing applications utilizing advanced, high-temperature metals and alloys. Issues concerning process optimization, including product structure and properties affected by oxidation are discussed and some comparisons of related additive manufactured microstructures are presented.

Microstructural and Process Characterization of Conductive Traces Printed from Ag Particulate Inks

Directory of Open Access Journals (Sweden)

Eric MacDonald

2011-05-01

Full Text Available Conductive inks are key enablers for the use of printing techniques in the fabrication of electronic systems. Focus on the understanding of aspects controlling the electrical performance of conductive ink is paramount. A comparison was made between microparticle Ag inks and an Ag nanoparticle ink. The microstructures resulting from thermal cure processes were characterized morphologically and also in terms of their effect on the resistivity of printed traces. For microparticle inks, the variability of resistivity measurements between samples as defined by coefficient of variation (CV was greater than 0.1 when the resistivity was 10 to 50 times that of bulk Ag. When the resistivity was lower (~1.4 times that of bulk Ag the CV of sample sets was less than 0.1. In the case of the nanoparticle ink, resistivity was found to decrease by a factor ranging from 1.2 to 1.5 after doubling the amount of layers printed prior to curing though it was expected to remain the same. Increasing the amount of layers printed also enhanced the sintering process.

3D Printing of Flexible Electrodes Towards Wearable Lithium Ion Battery

Directory of Open Access Journals (Sweden)

WANG Yi-bo

2018-03-01

Full Text Available A novel method to fabricate flexible free-standing electrodes with textile structure for lithium-ion batteries was provided by applying extrusion-based three-dimensional (3D printing technology. Meanwhile, highly concentrated poly(vinylidene fluoride (PVDF is used as viscosity modifier, carbon nanotube (CNT as conducting additive, and lithium iron phosphate (LFP or lithium titanium oxide (LTO as cathode or anode active materials respectively to develop printable inks with obvious shear-thinning behavior, and with the apparent viscosity and storage modulus platform value of over 105Pa·s, which is beneficial to the printability and enable complex 3D structures solidification. The electrochemical test shows that both printed electrodes have similar charge and discharge specific capacities under current density of 50mA·g-1. To explore the feasibility of the printed electrodes, a pouch cell with as-printed LFP and LTO electrode as cathode and anode respectively is assembled. The pouch cell without deformation delivers discharge specific capacities of approximately 108mAh·g-1, and there is a tiny increase in discharge specific capacities of around 111mAh·g-1 for bended pouch cell.

40 CFR 63.824 - Standards: Publication rotogravure printing.

Science.gov (United States)

2010-07-01

... (CONTINUED) National Emission Standards for the Printing and Publishing Industry § 63.824 Standards: Publication rotogravure printing. (a) Each owner or operator of any publication rotogravure printing affected... printing. 63.824 Section 63.824 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR...

3D printing cement based ink, and it’s application within the construction industry

Directory of Open Access Journals (Sweden)

Jianchao Zhu

2017-01-01

Full Text Available The 3D printing technology is the engine key of the third industrial revolution, after introduction of the automation in the eighteenth century and the concept of mass production in early of twentieth century. 3D printing technology now offers the magic solution to balance both the benefits, and overcome the major associated problem with the previous concept which was the need of repetition. The 3D printing technology has two main critical success factors: the printing machine and the printing material (ink. This paper focusses on cementitious-based materials and the ability to utilize the technology in the construction industry. The research took a qualitative approach based on previous literature reviews as well as in-house research results carried out by the authors’ employer Research and Development Center. The paper summarizes the approach towards to an appropriate mix design which can achieve the requirement of the printing process, and overcome the current constraints which are hindering the wide application of 3D print in construction industry. The authors believe that the research topic and result will have great impact on pushing the construction industry forward towards achieving the UAE Government’s strategy and target to achieve twenty-five percent (25% of the buildings in Dubai by the year of 2030 relying on the 3D printing methodology. The research also concluded that even though the technology is adding a great value to the construction industry, it must be remembered that the technology is still in its infancy, and further research is required to achieve even higher strength printing materials that would be workable in multi-story buildings without the need of additional steel reinforcement.

Printing Ancient Terracotta Warriors

Science.gov (United States)

Gadecki, Victoria L.

2010-01-01

Standing in awe in Xian, China, at the Terra Cotta warrior archaeological site, the author thought of sharing this experience and excitement with her sixth-grade students. She decided to let her students carve patterns of the ancient soldiers to understand their place in Chinese history. They would make block prints and print multiple soldiers on…

FUTURE SCOPE OF WOMEN CARRIER IN THE PRINTING INDUSTRY: THE CHALLENGES OF WOMEN IN PRINTING OGANIZATIONS (A SURVEY OF TWENTY FIVE COMPANIES "SMALL, MEDIUM AND LARGE PRINTING ORGANIZATION" IN AREA "NCR DELHI AND HISAR, HR".)

OpenAIRE

Mr. Azad Singh*

2017-01-01

Women carrier in printing organization today, printing industry is growing with an expositional rate & required skills manpower. In this survey based paper to getting recruit of women 10%small, 30%medium and 60% large scale print industry. Objective of this paper is too filled out manpower skills printing industries are seaking in B.Tech women printing students to bridge the gap between skills and required in printing organization. A survey 25 companies was carried out. the result indicated t...

Three-Dimensionally Printed Micro-electromechanical Switches.

Science.gov (United States)

Lee, Yongwoo; Han, Jungmin; Choi, Bongsik; Yoon, Jinsu; Park, Jinhee; Kim, Yeamin; Lee, Jieun; Kim, Dae Hwan; Kim, Dong Myong; Lim, Meehyun; Kang, Min-Ho; Kim, Sungho; Choi, Sung-Jin

2018-05-09

Three-dimensional (3D) printers have attracted considerable attention from both industry and academia and especially in recent years because of their ability to overcome the limitations of two-dimensional (2D) processes and to enable large-scale facile integration techniques. With 3D printing technologies, complex structures can be created using only a computer-aided design file as a reference; consequently, complex shapes can be manufactured in a single step with little dependence on manufacturer technologies. In this work, we provide a first demonstration of the facile and time-saving 3D printing of two-terminal micro-electromechanical (MEM) switches. Two widely used thermoplastic materials were used to form 3D-printed MEM switches; freely suspended and fixed electrodes were printed from conductive polylactic acid, and a water-soluble sacrificial layer for air-gap formation was printed from poly(vinyl alcohol). Our 3D-printed MEM switches exhibit excellent electromechanical properties, with abrupt switching characteristics and an excellent on/off current ratio value exceeding 10 6 . Therefore, we believe that our study makes an innovative contribution with implications for the development of a broader range of 3D printer applications (e.g., the manufacturing of various MEM devices and sensors), and the work highlights a uniquely attractive path toward the realization of 3D-printed electronics.

REFLECTION OF SELF-IDENTIFICATION IN THE REGIONAL PRINTED MASS MEDIA

Directory of Open Access Journals (Sweden)

Larisa Stepanovna Shmul’skaya

2017-11-01

Full Text Available The ways of reflecting and linguistic expression of territorial identity in the printed regional mass media were the subject of the study. The printed publications of the Yenisei region: Zarya of the Yenisei (socio-political newspaper of the city of Lesosibirsk, Angarsky Rabochiy (socio-political newspaper of Motyginsky district, Yeniseiskaya Pravda (Yeniseisk and Yeniseisky district socio-political newspaper , Zarya (social and political newspaper of Pirovsky district, Severo-Yeniseisky Vestnik (municipal newspaper of North Yenisei district, Novaya zhizn (Kazachinskaya socio-political newspaper of Krasnoyarsk Territory were chosen as the material for the research. Goal. To consider the concept of “regional identity” and to identify markers of territorial identity in the regional printed media. Research methods: the descriptive method and the method of the contextual analysis. Results. The regional identity is defined as a form of collective identity at which its carrier is capable to spatiotemporal identification, valuable, emotional, regulatory correlation with the outside world. When analyzing the texts of the regional newspapers certain features of reflecting and shaping the territorial “self” are revealed, that is characteristic of provincial newspapers in general and distinguishes them from the federal media. It is established that the mass media can be considered as means of formation, expression and transfer of regional values and are effective means of reflection and modeling of territorial identity.

Scalable, full-colour and controllable chromotropic plasmonic printing

Science.gov (United States)

Xue, Jiancai; Zhou, Zhang-Kai; Wei, Zhiqiang; Su, Rongbin; Lai, Juan; Li, Juntao; Li, Chao; Zhang, Tengwei; Wang, Xue-Hua

2015-01-01

Plasmonic colour printing has drawn wide attention as a promising candidate for the next-generation colour-printing technology. However, an efficient approach to realize full colour and scalable fabrication is still lacking, which prevents plasmonic colour printing from practical applications. Here we present a scalable and full-colour plasmonic printing approach by combining conjugate twin-phase modulation with a plasmonic broadband absorber. More importantly, our approach also demonstrates controllable chromotropic capability, that is, the ability of reversible colour transformations. This chromotropic capability affords enormous potentials in building functionalized prints for anticounterfeiting, special label, and high-density data encryption storage. With such excellent performances in functional colour applications, this colour-printing approach could pave the way for plasmonic colour printing in real-world commercial utilization. PMID:26567803

Effect of print layer height and printer type on the accuracy of 3-dimensional printed orthodontic models.

Science.gov (United States)

Favero, Christian S; English, Jeryl D; Cozad, Benjamin E; Wirthlin, John O; Short, Megan M; Kasper, F Kurtis

2017-10-01

Three-dimensional (3D) printing technologies enable production of orthodontic models from digital files; yet a range of variables associated with the process could impact the accuracy and clinical utility of the models. The objective of this study was to investigate the effect of print layer height on the accuracy of orthodontic models printed 3 dimensionally using a stereolithography format printer and to compare the accuracy of orthodontic models fabricated with several commercially available 3D printers. Thirty-six identical models were produced with a stereolithography-based 3D printer using 3 layer heights (n = 12 per group): 25, 50, and 100 μm. Forty-eight additional models were printed using 4 commercially available 3D printers (n = 12 per group). Each printed model was digitally scanned and compared with the input file via superimposition analysis using a best-fit algorithm to assess accuracy. Statistically significant differences were found in the average overall deviations of models printed at each layer height, with the 25-μm and 100-μm layer height groups having the greatest and least deviations, respectively. Statistically significant differences were also found in the average overall deviations of models produced using the various 3D printer models, but all values fell within clinically acceptable limits. The print layer height and printer model can affect the accuracy of a 3D printed orthodontic model, but the impact should be considered with respect to the clinical tolerances associated with the envisioned application. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Intelligent Adjustment of Printhead Driving Waveform Parameters for 3D Electronic Printing

Directory of Open Access Journals (Sweden)

Lin Na

2017-01-01

Full Text Available In practical applications of 3D electronic printing, a major challenge is to adjust the printhead for a high print resolution and accuracy. However, an exhausting manual selective process inevitably wastes a lot of time. Therefore, in this paper, we proposed a new intelligent adjustment method, which adopts artificial bee colony algorithm to optimize the printhead driving waveform parameters for getting the desired printhead state. Experimental results show that this method can quickly and accuracy find out the suitable combination of driving waveform parameters to meet the needs of applications.

3D Printing and Its Disruptive Impacts on Supply Chains of the Future

Directory of Open Access Journals (Sweden)

Sebastian Mohr

2015-11-01

Full Text Available 3D printing technology has emerged as one of the most disruptive innovations to impact the global supply chain and logistics industry. The technology is impacting our personal and professional lives, with some claiming that the technology will revolutionize and replace existing manufacturing technologies, while others argue that the technology merely enhances some aspects of the production process. Whether evolutionary or revolutionary, 3D printing technology is recognized as a striking trend that will significantly impact supply chains. Although the expansion of 3D printing in the private consumer market is an interesting development in its own right, the biggest potential for disruption lies in industrial applications and how 3D printing will influence supply chains of the future. In this article, we examine the areas of the supply chain most likely to be disrupted by 3D printing technology and we identify the key questions that must be answered in a roadmap for future research and practice. While we seek answers to these questions, we suggest that managers should develop a flexible change management strategy to mitigate the effects of disruption to their future supply chains and take advantage of the resulting opportunities. Those that do nothing will be left wanting, because the influence of 3D printing technology on supply chains is expected to grow.

Templated Dry Printing of Conductive Metal Nanoparticles

Science.gov (United States)

Rolfe, David Alexander

Printed electronics can lower the cost and increase the ubiquity of electrical components such as batteries, sensors, and telemetry systems. Unfortunately, the advance of printed electronics has been held back by the limited minimum resolution, aspect ratio, and feature fidelity of present printing techniques such as gravure, screen printing and inkjet printing. Templated dry printing offers a solution to these problems by patterning nanoparticle inks into templates before drying. This dissertation shows advancements in two varieties of templated dry nanoprinting. The first, advective micromolding in vapor-permeable templates (AMPT) is a microfluidic approach that uses evaporation-driven mold filling to create submicron features with a 1:1 aspect ratio. We will discuss submicron surface acoustic wave (SAW) resonators made through this process, and the refinement process in the template manufacturing process necessary to make these devices. We also present modeling techniques that can be applied to future AMPT templates. We conclude with a modified templated dry printing that improves throughput and isolated feature patterning by transferring dry-templated features with laser ablation. This method utilizes surface energy-defined templates to pattern features via doctor blade coating. Patterned and dried features can be transferred to a polymer substrate with an Nd:YAG MOPA fiber laser, and printed features can be smaller than the laser beam width.

Advances and Future Challenges in Printed Batteries.

Science.gov (United States)

Sousa, Ricardo E; Costa, Carlos M; Lanceros-Méndez, Senentxu

2015-11-01

There is an increasing interest in thin and flexible energy storage devices to meet modern society's needs for applications such as radio frequency sensing, interactive packaging, and other consumer products. Printed batteries comply with these requirements and are an excellent alternative to conventional batteries for many applications. Flexible and microbatteries are also included in the area of printed batteries when fabricated using printing technologies. The main characteristics, advantages, disadvantages, developments, and printing techniques of printed batteries are presented and discussed in this Review. The state-of-the-art takes into account both the research and industrial levels. On the academic level, the research progress of printed batteries is divided into lithium-ion and Zn-manganese dioxide batteries and other battery types, with emphasis on the different materials for anode, cathode, and separator as well as in the battery design. With respect to the industrial state-of-the-art, materials, device formulations, and manufacturing techniques are presented. Finally, the prospects and challenges of printed batteries are discussed. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

3D Printed Bionic Nanodevices

Science.gov (United States)

Kong, Yong Lin; Gupta, Maneesh K.; Johnson, Blake N.; McAlpine, Michael C.

2016-01-01

Summary The ability to three-dimensionally interweave biological and functional materials could enable the creation of bionic devices possessing unique and compelling geometries, properties, and functionalities. Indeed, interfacing high performance active devices with biology could impact a variety of fields, including regenerative bioelectronic medicines, smart prosthetics, medical robotics, and human-machine interfaces. Biology, from the molecular scale of DNA and proteins, to the macroscopic scale of tissues and organs, is three-dimensional, often soft and stretchable, and temperature sensitive. This renders most biological platforms incompatible with the fabrication and materials processing methods that have been developed and optimized for functional electronics, which are typically planar, rigid and brittle. A number of strategies have been developed to overcome these dichotomies. One particularly novel approach is the use of extrusion-based multi-material 3D printing, which is an additive manufacturing technology that offers a freeform fabrication strategy. This approach addresses the dichotomies presented above by (1) using 3D printing and imaging for customized, hierarchical, and interwoven device architectures; (2) employing nanotechnology as an enabling route for introducing high performance materials, with the potential for exhibiting properties not found in the bulk; and (3) 3D printing a range of soft and nanoscale materials to enable the integration of a diverse palette of high quality functional nanomaterials with biology. Further, 3D printing is a multi-scale platform, allowing for the incorporation of functional nanoscale inks, the printing of microscale features, and ultimately the creation of macroscale devices. This blending of 3D printing, novel nanomaterial properties, and ‘living’ platforms may enable next-generation bionic systems. In this review, we highlight this synergistic integration of the unique properties of nanomaterials with

3D Printed Bionic Nanodevices.

Science.gov (United States)

Kong, Yong Lin; Gupta, Maneesh K; Johnson, Blake N; McAlpine, Michael C

2016-06-01

The ability to three-dimensionally interweave biological and functional materials could enable the creation of bionic devices possessing unique and compelling geometries, properties, and functionalities. Indeed, interfacing high performance active devices with biology could impact a variety of fields, including regenerative bioelectronic medicines, smart prosthetics, medical robotics, and human-machine interfaces. Biology, from the molecular scale of DNA and proteins, to the macroscopic scale of tissues and organs, is three-dimensional, often soft and stretchable, and temperature sensitive. This renders most biological platforms incompatible with the fabrication and materials processing methods that have been developed and optimized for functional electronics, which are typically planar, rigid and brittle. A number of strategies have been developed to overcome these dichotomies. One particularly novel approach is the use of extrusion-based multi-material 3D printing, which is an additive manufacturing technology that offers a freeform fabrication strategy. This approach addresses the dichotomies presented above by (1) using 3D printing and imaging for customized, hierarchical, and interwoven device architectures; (2) employing nanotechnology as an enabling route for introducing high performance materials, with the potential for exhibiting properties not found in the bulk; and (3) 3D printing a range of soft and nanoscale materials to enable the integration of a diverse palette of high quality functional nanomaterials with biology. Further, 3D printing is a multi-scale platform, allowing for the incorporation of functional nanoscale inks, the printing of microscale features, and ultimately the creation of macroscale devices. This blending of 3D printing, novel nanomaterial properties, and 'living' platforms may enable next-generation bionic systems. In this review, we highlight this synergistic integration of the unique properties of nanomaterials with the

3D printing technologies for electrochemical energy storage

Energy Technology Data Exchange (ETDEWEB)

Zhang, Feng; Wei, Min; Viswanathan, Vilayanur V.; Swart, Benjamin; Shao, Yuyan; Wu, Gang; Zhou, Chi

2017-10-01

Fabrication of electrodes and electrolytes play an important role in promoting the performance of electrochemical energy storage (EES) devices such as batteries and supercapacitors. Traditional fabrication techniques have limited capability in controlling the geometry and architecture of the electrode and solid-state electrolytes, which would otherwise compromise the performance. 3D printing, a disruptive manufacturing technology, has emerged as an innovative approach to fabricating EES devices from nanoscale to macroscale and from nanowatt to megawatt, providing great opportunities to accurately control device geometry (e.g., dimension, porosity, morphology) and structure with enhanced specific energy and power densities. Moreover, the additive manufacturing nature of 3D printing provides excellent controllability of the electrode thickness with much simplified process in a cost effective manner. With the unique spatial and temporal material manipulation capability, 3D printing can integrate multiple nanomaterials in the same print, and multi-functional EES devices (including functional gradient devices) can be fabricated. Herein, we review recent advances in 3D printing of EES devices. We focused on two major 3D printing technologies including direct writing and inkjet printing. The direct material deposition characteristics of these two processes enable them to print on a variety of flat substrates, even a conformal one, well suiting them to applications such as wearable devices and on-chip integrations. Other potential 3D printing techniques such as freeze nano-printing, stereolithography, fused deposition modeling, binder jetting, laminated object manufacturing, and metal 3D printing are also introduced. The advantages and limitations of each 3D printing technology are extensively discussed. More importantly, we provide a perspective on how to integrate the emerging 3D printing with existing technologies to create structures over multiple length scale from

The effects of printing orientation on the electrochemical behaviour of 3D printed acrylonitrile butadiene styrene (ABS)/carbon black electrodes.

Science.gov (United States)

Bin Hamzah, Hairul Hisham; Keattch, Oliver; Covill, Derek; Patel, Bhavik Anil

2018-06-14

Additive manufacturing also known as 3D printing is being utilised in electrochemistry to reproducibly develop complex geometries with conductive properties. In this study, we explored if the electrochemical behavior of 3D printed acrylonitrile butadiene styrene (ABS)/carbon black electrodes was influenced by printing direction. The electrodes were printed in both horizontal and vertical directions. The horizsontal direction resulted in a smooth surface (HPSS electrode) and a comparatively rougher surface (HPRS electrode) surface. Electrodes were characterized using cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry. For various redox couples, the vertical printed (VP) electrode showed enhanced current response when compared the two electrode surfaces generated by horizontal print direction. No differences in the capacitive response was observed, indicating that the conductive surface area of all types of electrodes were identical. The VP electrode had reduced charge transfer resistance and uncompensated solution resistance when compared to the HPSS and HPRS electrodes. Overall, electrodes printed in a vertical direction provide enhanced electrochemical performance and our study indicates that print orientation is a key factor that can be used to enhance sensor performance.

Three-Dimensional Printing Surgical Applications.

Science.gov (United States)

AlAli, Ahmad B; Griffin, Michelle F; Butler, Peter E

2015-01-01

Three-dimensional printing, a technology used for decades in the industrial field, gains a lot of attention in the medical field for its potential benefits. With advancement of desktop printers, this technology is accessible and a lot of research is going on in the medical field. To evaluate its application in surgical field, which may include but not limited to surgical planning, surgical education, implants, and prosthesis, which are the focus of this review. Research was conducted by searching PubMed, Web of science, and other reliable sources. We included original articles and excluded articles based on animals, those more than 10 years old, and those not in English. These articles were evaluated, and relevant studies were included in this review. Three-dimensional printing shows a potential benefit in surgical application. Printed implants were used in patient in a few cases and show successful results; however, longer follow-up and more trials are needed. Surgical and medical education is believed to be more efficient with this technology than the current practice. Printed surgical instrument and surgical planning are also believed to improve with three-dimensional printing. Three-dimensional printing can be a very powerful tool in the near future, which can aid the medical field that is facing a lot of challenges and obstacles. However, despite the reported results, further research on larger samples and analytical measurements should be conducted to ensure this technology's impact on the practice.

Four-dimensional Printing of Liquid Crystal Elastomers.

Science.gov (United States)

Ambulo, Cedric P; Burroughs, Julia J; Boothby, Jennifer M; Kim, Hyun; Shankar, M Ravi; Ware, Taylor H

2017-10-25

Three-dimensional structures capable of reversible changes in shape, i.e., four-dimensional-printed structures, may enable new generations of soft robotics, implantable medical devices, and consumer products. Here, thermally responsive liquid crystal elastomers (LCEs) are direct-write printed into 3D structures with a controlled molecular order. Molecular order is locally programmed by controlling the print path used to build the 3D object, and this order controls the stimulus response. Each aligned LCE filament undergoes 40% reversible contraction along the print direction on heating. By printing objects with controlled geometry and stimulus response, magnified shape transformations, for example, volumetric contractions or rapid, repetitive snap-through transitions, are realized.

Strategies in the digital printing value system

OpenAIRE

Mejtoft, Thomas

2006-01-01

The research objective of this thesis is to identify corporate strategies and strategic decisions in the digital printing business and to analyze how these have evolved due to the introduction of digital printing. This thesis comprises three separate studies, all based on qualitative case methodology. The first study is focused on digital printing houses and how their business strategies have changed due to their investment in digital printing production equipment. The second study concentrat...

Effect of Hyperbranched Polymers on Curing Behavior of UV Curable Inks in Inkjet Printing

Directory of Open Access Journals (Sweden)

Samane Jafarifard

2016-07-01

Full Text Available A high quality and high resolution printing can be rapidly created by inkjet printing technology. Inkjet printing is one of the most economic printing methods and ink waste in this technique is very low. Inkjet process provides printing on any type of substrates. The UV curable inks are special types of printing inks that have been widely used in the last decades. The use of UV curable inks is more attractive in inkjet printing technology in comparison to other methods of printing. The most important advantage of UV curable inks in this method is that they are VOC-free and compatible and have good adhesion on many types of substrates. In this research, the effect of hyperbranched polymers on the curing behavior of UV curable inks was investigated. Two types of hyperbranched polymers with hydroxyl and fatty acid chain terminal groups were used in ink formulations. The effect of hyperbranched polymers on the curing behavior of UV curable ink was investigated by real-time FTIR analysis. The results showed that the hyperbranched polymers could improve curing process by increasing the conversion rate of the third curing stage. All ink formulations containing hyperbranched polymers showed higher conversion than a neat sample. The highest conversion was 77 % for the blend containing a hyperbranched polymer with hydroxyl end groups while the neat sample showed a final conversion of 55%. UV curable inks in inkjet process containing hyperbranched polymers with hydroxyl end groups showed a higher final conversion than neat sample.

Visual Attention to Print-Salient and Picture-Salient Environmental Print in Young Children

Science.gov (United States)

Neumann, Michelle M.; Summerfield, Katelyn; Neumann, David L.

2015-01-01

Environmental print is composed of words and contextual cues such as logos and pictures. The salience of the contextual cues may influence attention to words and thus the potential of environmental print in promoting early reading development. The present study explored this by presenting pre-readers (n = 20) and beginning readers (n = 16) with…

A Miniaturized QEPAS Trace Gas Sensor with a 3D-Printed Acoustic Detection Module

Directory of Open Access Journals (Sweden)

Xiaotao Yang

2017-07-01

Full Text Available A 3D printing technique was introduced to a quartz-enhanced photoacoustic spectroscopy (QEPAS sensor and is reported for the first time. The acoustic detection module (ADM was designed and fabricated using the 3D printing technique and the ADM volume was compressed significantly. Furthermore, a small grin lens was used for laser focusing and facilitated the beam adjustment in the 3D-printed ADM. A quartz tuning fork (QTF with a low resonance frequency of 30.72 kHz was used as the acoustic wave transducer and acetylene (C2H2 was chosen as the analyte. The reported miniaturized QEPAS trace gas sensor is useful in actual sensor applications.

Image once, print thrice? Three-dimensional printing of replacement parts.

Science.gov (United States)

Rankin, Timothy M; Wormer, Blair A; Miller, John D; Giovinco, Nicholas A; Al Kassis, Salam; Armstrong, David G

2018-02-01

The last 20 years has seen an exponential increase in 3D printing as it pertains to the medical industry and more specifically surgery. Previous reviews in this domain have chosen to focus on applications within a specific field. To our knowledge, none have evaluated the broad applications of patient-specific or digital imaging and communications in medicine (DICOM) derived applications of this technology. We searched PUBMED and CINAHL from April 2012 to April 2017. 261 studies fulfilled the inclusion criteria. Proportions of articles reviewed: DICOM (5%), CT (38%), MRI (20%), Ultrasonography (28%), and Bio-printing (9%). There is level IV evidence to support the use of 3D printing for education, pre-operative planning, simulation and implantation. In order to make this technology widely applicable, it will require automation of DICOM to standard tessellation language to implant. Advances in knowledge: Recent lapses in intellectual property and greater familiarity with rapid prototyping in medicine has set the stage for the next generation of custom implants, simulators and autografts. Radiologists may be able to help establish reimbursable procedural terminology.

Designing Biomaterials for 3D Printing.

Science.gov (United States)

Guvendiren, Murat; Molde, Joseph; Soares, Rosane M D; Kohn, Joachim

2016-10-10

Three-dimensional (3D) printing is becoming an increasingly common technique to fabricate scaffolds and devices for tissue engineering applications. This is due to the potential of 3D printing to provide patient-specific designs, high structural complexity, rapid on-demand fabrication at a low-cost. One of the major bottlenecks that limits the widespread acceptance of 3D printing in biomanufacturing is the lack of diversity in "biomaterial inks". Printability of a biomaterial is determined by the printing technique. Although a wide range of biomaterial inks including polymers, ceramics, hydrogels and composites have been developed, the field is still struggling with processing of these materials into self-supporting devices with tunable mechanics, degradation, and bioactivity. This review aims to highlight the past and recent advances in biomaterial ink development and design considerations moving forward. A brief overview of 3D printing technologies focusing on ink design parameters is also included.

Research Update: Large-area deposition, coating, printing, and processing techniques for the upscaling of perovskite solar cell technology

Directory of Open Access Journals (Sweden)

Stefano Razza

2016-09-01

Full Text Available To bring perovskite solar cells to the industrial world, performance must be maintained at the photovoltaic module scale. Here we present large-area manufacturing and processing options applicable to large-area cells and modules. Printing and coating techniques, such as blade coating, slot-die coating, spray coating, screen printing, inkjet printing, and gravure printing (as alternatives to spin coating, as well as vacuum or vapor based deposition and laser patterning techniques are being developed for an effective scale-up of the technology. The latter also enables the manufacture of solar modules on flexible substrates, an option beneficial for many applications and for roll-to-roll production.

Batch fabrication of disposable screen printed SERS arrays.

Science.gov (United States)

Qu, Lu-Lu; Li, Da-Wei; Xue, Jin-Qun; Zhai, Wen-Lei; Fossey, John S; Long, Yi-Tao

2012-03-07

A novel facile method of fabricating disposable and highly reproducible surface-enhanced Raman spectroscopy (SERS) arrays using screen printing was explored. The screen printing ink containing silver nanoparticles was prepared and printed on supporting materials by a screen printing process to fabricate SERS arrays (6 × 10 printed spots) in large batches. The fabrication conditions, SERS performance and application of these arrays were systematically investigated, and a detection limit of 1.6 × 10(-13) M for rhodamine 6G could be achieved. Moreover, the screen printed SERS arrays exhibited high reproducibility and stability, the spot-to-spot SERS signals showed that the intensity variation was less than 10% and SERS performance could be maintained over 12 weeks. Portable high-throughput analysis of biological samples was accomplished using these disposable screen printed SERS arrays.

Influence of Printed Leaflets on Consumer Purchase Behavior

Directory of Open Access Journals (Sweden)

Jan Huml