WorldWideScience

Sample records for highly transient time

  1. The High Time Resolution Universe surveys for pulsars and fast transients

    CERN Document Server

    Keith, Michael J

    2012-01-01

    The High Time Resolution Universe survey for pulsars and transients is the first truly all-sky pulsar survey, taking place at the Parkes Radio Telescope in Australia and the Effelsberg Radio Telescope in Germany. Utilising multibeam receivers with custom built all-digital recorders the survey targets the fastest millisecond pulsars and radio transients on timescales of 64 us to a few seconds. The new multibeam digital filter-bank system at has a factor of eight improvement in frequency resolution over previous Parkes multibeam surveys, allowing us to probe further into the Galactic plane for short duration signals. The survey is split into low, mid and high Galactic latitude regions. The mid-latitude portion of the southern hemisphere survey is now completed, discovering 107 previously unknown pulsars, including 26 millisecond pulsars. To date, the total number of discoveries in the combined survey is 135 and 29 MSPs. These discoveries include the first magnetar to be discovered by it's radio emission, unusua...

  2. Modeling of time-resolved laser-induced incandescence transients for particle sizing in high-pressure spray combustion environments : a comparative study

    NARCIS (Netherlands)

    Dreier, T.; Bougie, B.; Dam, N.J.; Gerber, T.

    2006-01-01

    In this study experimental single-pulse, time-resolved laser-induced incandescence (TIRE-LII) signal intensity profiles acquired during transient Diesel combustion events at high pressure were processed. Experiments were performed between 0.6 and 7 MPa using a high-temperature high-pressure constant

  3. Real-Time Detection and Rapid Multiwavelength Follow-up Observations of a Highly Subluminous Type II-P Supernova from the Palomar Transient Factory Survey

    CERN Document Server

    Gal-Yam, Avishay; Arcavi, Iair; Green, Yoav; Yaron, Ofer; Ben-Ami, Sagi; Xu, Dong; Sternberg, Assaf; Quimby, Robert M; Kulkarni, Shrinivas R; Ofek, Eran O; Walters, Richard; Nugent, Peter E; Poznanski, Dovi; Bloom, Joshua S; Cenko, S Bradley; Filippenko, Alexei V; Li, Weidong; Silverman, J; Walker, Emma S; Sullivan, Mark; Maguire, K; Howell, D Andrew; Mazzali, Paolo A; Frail, Dale A; Bersier, David; James, Phil A; Akerlof, C W; Yuan, Fang; Fox, Derek B; Law, Nicholas; Gehrels, Neil

    2011-01-01

    The Palomar Transient Factory (PTF) is an optical wide-field variability survey carried out using a camera with a 7.8 square degree field of view mounted on the 48-in Oschin Schmidt telescope at Palomar Observatory. One of the key goals of this survey is to conduct high-cadence monitoring of the sky in order to detect optical transient sources shortly after they occur. Here, we describe the real-time capabilities of the PTF and our related rapid multiwavelength follow-up programs, extending from the radio to the gamma-ray bands. We present as a case study observations of the optical transient PTF10vdl (SN 2010id), revealed to be a very young core-collapse (Type II-P) supernova having a remarkably low luminosity. Our results demonstrate that the PTF now provides for optical transients the real-time discovery and rapid-response follow-up capabilities previously reserved only for high-energy transients like gamma-ray bursts.

  4. A Highly Stable Marching-on-in-Time Volume Integral Equation Solver for Analyzing Transient Wave Interactions on High-Contrast Scatterers

    KAUST Repository

    Bagci, Hakan

    2014-01-06

    Time domain integral equation (TDIE) solvers represent an attractive alternative to finite difference (FDTD) and finite element (FEM) schemes for analyzing transient electromagnetic interactions on composite scatterers. Current induced on a scatterer, in response to a transient incident field, generates a scattered field. First, the scattered field is expressed as a spatio-temporal convolution of the current and the Green function of the background medium. Then, a TDIE is obtained by enforcing boundary conditions and/or fundamental field relations. TDIEs are often solved for the unknown current using marching on-in-time (MOT) schemes. MOT-TDIE solvers expand the current using local spatio-temporal basis functions. Inserting this expansion into the TDIE and testing the resulting equation in space and time yields a lower triangular system of equations (termed MOT system), which can be solved by marching in time for the coefficients of the current expansion. Stability of the MOT scheme often depends on how accurately the spatio-temporal convolution of the current and the Green function is discretized. In this work, band-limited prolate-based interpolation functions are used as temporal bases in expanding the current and discretizing the spatio-temporal convolution. Unfortunately, these functions are two sided, i.e., they require ”future” current samples for interpolation, resulting in a non-causal MOT system. To alleviate the effect of non-causality and restore the ability to march in time, an extrapolation scheme can be used to estimate the future values of the currents from their past values. Here, an accurate, stable and band-limited extrapolation scheme is developed for this purpose. This extrapolation scheme uses complex exponents, rather than commonly used harmonics, so that propagating and decaying mode fields inside the dielectric scatterers are accurately modeled. The resulting MOT scheme is applied to solving the time domain volume integral equation (VIE

  5. Time Transient Effects in Superconducting Magnets

    CERN Document Server

    AUTHOR|(CDS)2051280; Russenschuck, Stephan; Palumbo, Luigi

    2004-01-01

    The subject of this thesis is the study of time transient effects in super- conducting cables, with applications to accelerator magnets, and the development of a simulation code. The superconducting cables are modeled at the strand level as a lumped resistor, inductor generator circuit. The analysis in time domain of the circuit currents discloses the transient effects. The code developed can solve Rutherford type cable of any size, shape geometry under any exciting external field. The code has been implemented in Roxie where it is used to compute ramp dependent field error and heat losses.

  6. The Commensal Real-time ASKAP Fast Transients (CRAFT) survey

    CERN Document Server

    Macquart, Jean-Pierre; Bower, G C; Bunton, J D; Chatterjee, S; Colegate, T; Cordes, J M; D'Addario, L; Deller, A; Dodson, R; Fender, R; Haines, K; Hall, P; Harris, C; Hotan, A; Johnston, S; Jones, D L; Keith, M; Koay, J Y; Lazio, T J W; Majid, W; Murphy, T; Navarro, R; Phillips, C; Quinn, P; Preston, R A; Stansby, B; Stairs, I; Stappers, B; Staveley-Smith, L; Tingay, S; Thompson, D; van Straten, W; Wagstaff, K; Warren, M; Wayth, R; Wen, L

    2010-01-01

    We are developing a purely commensal survey experiment for fast (<5s) transient radio sources. Short-timescale transients are associated with the most energetic and brightest single events in the Universe. Our objective is to cover the enormous volume of transients parameter space made available by ASKAP, with an unprecedented combination of sensitivity and field of view. Fast timescale transients open new vistas on the physics of high brightness temperature emission, extreme states of matter and the physics of strong gravitational fields. In addition, the detection of extragalactic objects affords us an entirely new and extremely sensitive probe on the huge reservoir of baryons present in the IGM. We outline here our approach to the considerable challenge involved in detecting fast transients, particularly the development of hardware fast enough to dedisperse and search the ASKAP data stream at or near real-time rates. Through CRAFT, ASKAP will provide the testbed of many of the key technologies and surve...

  7. A Q-switched Ho:YAG laser assisted nanosecond time-resolved T-jump transient mid-IR absorbance spectroscopy with high sensitivity

    Energy Technology Data Exchange (ETDEWEB)

    Li, Deyong; Li, Yunliang; Li, Hao; Weng, Yuxiang, E-mail: yxweng@iphy.ac.cn [Key Laboratory of Soft Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Wu, Xianyou [Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Hefei 230031 (China); Yu, Qingxu [School of Physics and Optoelectronic Technology, Dalian University of Technology, No. 2, Linggong Road, Dalian 116023 (China)

    2015-05-15

    Knowledge of dynamical structure of protein is an important clue to understand its biological function in vivo. Temperature-jump (T-jump) time-resolved transient mid-IR absorbance spectroscopy is a powerful tool in elucidating the protein dynamical structures and the folding/unfolding kinetics of proteins in solution. A home-built setup of T-jump time-resolved transient mid-IR absorbance spectroscopy with high sensitivity is developed, which is composed of a Q-switched Cr, Tm, Ho:YAG laser with an output wavelength at 2.09 μm as the T-jump heating source, and a continuous working CO laser tunable from 1580 to 1980 cm{sup −1} as the IR probe. The results demonstrate that this system has a sensitivity of 1 × 10{sup −4} ΔOD for a single wavelength detection, and 2 × 10{sup −4} ΔOD for spectral detection in amide I′ region, as well as a temporal resolution of 20 ns. Moreover, the data quality coming from the CO laser is comparable to the one using the commercial quantum cascade laser.

  8. A Q-switched Ho:YAG laser assisted nanosecond time-resolved T-jump transient mid-IR absorbance spectroscopy with high sensitivity.

    Science.gov (United States)

    Li, Deyong; Li, Yunliang; Li, Hao; Wu, Xianyou; Yu, Qingxu; Weng, Yuxiang

    2015-05-01

    Knowledge of dynamical structure of protein is an important clue to understand its biological function in vivo. Temperature-jump (T-jump) time-resolved transient mid-IR absorbance spectroscopy is a powerful tool in elucidating the protein dynamical structures and the folding/unfolding kinetics of proteins in solution. A home-built setup of T-jump time-resolved transient mid-IR absorbance spectroscopy with high sensitivity is developed, which is composed of a Q-switched Cr, Tm, Ho:YAG laser with an output wavelength at 2.09 μm as the T-jump heating source, and a continuous working CO laser tunable from 1580 to 1980 cm(-1) as the IR probe. The results demonstrate that this system has a sensitivity of 1 × 10(-4) ΔOD for a single wavelength detection, and 2 × 10(-4) ΔOD for spectral detection in amide I' region, as well as a temporal resolution of 20 ns. Moreover, the data quality coming from the CO laser is comparable to the one using the commercial quantum cascade laser.

  9. Towards a Real-time Transient Classification Engine

    Energy Technology Data Exchange (ETDEWEB)

    Nugent, Peter E; Bloom, Josh; Starr, Dan; Butler, Nat; Nugent, Peter; Rischard, M.; Eads, D.; Poznanski, Dovi

    2008-02-22

    Temporal sampling does more than add another axis to the vector of observables. Instead, under the recognition that how objects change (and move) in time speaks directly to the physics underlying astronomical phenomena, next-generation wide-field synoptic surveys are poised to revolutionize our understanding of just about anything that goes bump in the night (which is just about everything at some level). Still, even the most ambitious surveys will require targeted spectroscopic follow-up to fill in the physical details of newly discovered transients. We are now building a new system intended to ingest and classify transient phenomena in near real-time from high-throughput imaging data streams. Described herein, the Transient Classification Project at Berkeley will be making use of classification techniques operating on"features" extracted from time series and contextual (static) information. We also highlight the need for a community adoption of a standard representation of astronomical time series data (i.e.,"VOTimeseries").

  10. Towards a Real-time Transient Classification Engine

    CERN Document Server

    Bloom, J S; Butler, N R; Nugent, P; Rischard, M; Eads, D; Poznanski, D

    2008-01-01

    Temporal sampling does more than add another axis to the vector of observables. Instead, under the recognition that how objects change (and move) in time speaks directly to the physics underlying astronomical phenomena, next-generation wide-field synoptic surveys are poised to revolutionize our understanding of just about anything that goes bump in the night (which is just about everything at some level). Still, even the most ambitious surveys will require targeted spectroscopic follow-up to fill in the physical details of newly discovered transients. We are now building a new system intended to ingest and classify transient phenomena in near real-time from high-throughput imaging data streams. Described herein, the Transient Classification Project at Berkeley will be making use of classification techniques operating on ``features'' extracted from time series and contextual (static) information. We also highlight the need for a community adoption of a standard representation of astronomical time series data (...

  11. Extreme Transients in the High Energy Universe

    Science.gov (United States)

    Kouveliotou, Chryssa

    2013-01-01

    The High Energy Universe is rich in diverse populations of objects spanning the entire cosmological (time)scale, from our own present-day Milky Way to the re-ionization epoch. Several of these are associated with extreme conditions irreproducible in laboratories on Earth. Their study thus sheds light on the behavior of matter under extreme conditions, such as super-strong magnetic fields (in excess of 10^14 G), high gravitational potentials (e.g., Super Massive Black Holes), very energetic collimated explosions resulting in relativistic jet flows (e.g., Gamma Ray Bursts, exceeding 10^53 ergs). In the last thirty years, my work has been mostly focused on two apparently different but potentially linked populations of such transients: magnetars (highly magnetized neutron stars) and Gamma Ray Bursts (strongly beamed emission from relativistic jets), two populations that constitute unique astrophysical laboratories, while also giving us the tools to probe matter conditions in the Universe to redshifts beyond z=10, when the first stars and galaxies were assembled. I did not make this journey alone I have either led or participated in several international collaborations studying these phenomena in multi-wavelength observations; solitary perfection is not sufficient anymore in the world of High Energy Astrophysics. I will describe this journey, present crucial observational breakthroughs, discuss key results and muse on the future of this field.

  12. Transient nanobubbles in short-time electrolysis

    NARCIS (Netherlands)

    Svetovoy, Vitaly; Sanders, Remco G.P.; Elwenspoek, Michael Curt

    2013-01-01

    Water electrolysis in a microsystem is observed and analyzed on a short-time scale of ∼10 μs. The very unusual properties of the process are stressed. An extremely high current density is observed because the process is not limited by the diffusion of electroactive species. The high current is

  13. Thermal lens spectrometry: Optimizing amplitude and shortening the transient time

    Science.gov (United States)

    Silva, Rubens; de Araújo, Marcos A. C.; Jali, Pedro; Moreira, Sanclayton G. C.; Alcantara, Petrus; de Oliveira, Paulo C.

    2011-06-01

    Based on a model introduced by Shen et al. for cw laser induced mode-mismatched dual-beam thermal lens spectrometry (TLS), we explore the parameters related with the geometry of the laser beams and the experimental apparatus that influence the amplitude and time evolution of the transient thermal lens (TL) signal. By keeping the sample cell at the minimum waist of the excitation beam, our results show that high amplitude TL signals, very close to the optimized value, combined with short transient times may be obtained by reducing the curvature radius of the probe beam and the distance between the sample cell and the detector. We also derive an expression for the thermal diffusivity which is independent of the excitation laser beam waist, considerably improving the accuracy of the measurements. The sample used in the experiments was oleic acid, which is present in most of the vegetable oils and is very transparent in the visible spectral range.

  14. Thermal lens spectrometry: Optimizing amplitude and shortening the transient time

    Directory of Open Access Journals (Sweden)

    Rubens Silva

    2011-06-01

    Full Text Available Based on a model introduced by Shen et al. for cw laser induced mode-mismatched dual-beam thermal lens spectrometry (TLS, we explore the parameters related with the geometry of the laser beams and the experimental apparatus that influence the amplitude and time evolution of the transient thermal lens (TL signal. By keeping the sample cell at the minimum waist of the excitation beam, our results show that high amplitude TL signals, very close to the optimized value, combined with short transient times may be obtained by reducing the curvature radius of the probe beam and the distance between the sample cell and the detector. We also derive an expression for the thermal diffusivity which is independent of the excitation laser beam waist, considerably improving the accuracy of the measurements. The sample used in the experiments was oleic acid, which is present in most of the vegetable oils and is very transparent in the visible spectral range.

  15. Parallel time domain solvers for electrically large transient scattering problems

    KAUST Repository

    Liu, Yang

    2014-09-26

    Marching on in time (MOT)-based integral equation solvers represent an increasingly appealing avenue for analyzing transient electromagnetic interactions with large and complex structures. MOT integral equation solvers for analyzing electromagnetic scattering from perfect electrically conducting objects are obtained by enforcing electric field boundary conditions and implicitly time advance electric surface current densities by iteratively solving sparse systems of equations at all time steps. Contrary to finite difference and element competitors, these solvers apply to nonlinear and multi-scale structures comprising geometrically intricate and deep sub-wavelength features residing atop electrically large platforms. Moreover, they are high-order accurate, stable in the low- and high-frequency limits, and applicable to conducting and penetrable structures represented by highly irregular meshes. This presentation reviews some recent advances in the parallel implementations of time domain integral equation solvers, specifically those that leverage multilevel plane-wave time-domain algorithm (PWTD) on modern manycore computer architectures including graphics processing units (GPUs) and distributed memory supercomputers. The GPU-based implementation achieves at least one order of magnitude speedups compared to serial implementations while the distributed parallel implementation are highly scalable to thousands of compute-nodes. A distributed parallel PWTD kernel has been adopted to solve time domain surface/volume integral equations (TDSIE/TDVIE) for analyzing transient scattering from large and complex-shaped perfectly electrically conducting (PEC)/dielectric objects involving ten million/tens of millions of spatial unknowns.

  16. Discovery, classification, and scientific exploration of transient events from the Catalina Real-time Transient Survey

    CERN Document Server

    Mahabal, A A; Drake, A J; Donalek, C; Graham, M J; Williams, R D; Chen, Y; Moghaddam, B; Turmon, M; Beshore, E; Larson, S

    2011-01-01

    Exploration of the time domain - variable and transient objects and phenomena - is rapidly becoming a vibrant research frontier, touching on essentially every field of astronomy and astrophysics, from the Solar system to cosmology. Time domain astronomy is being enabled by the advent of the new generation of synoptic sky surveys that cover large areas on the sky repeatedly, and generating massive data streams. Their scientific exploration poses many challenges, driven mainly by the need for a real-time discovery, classification, and follow-up of the interesting events. Here we describe the Catalina Real-Time Transient Survey (CRTS), that discovers and publishes transient events at optical wavelengths in real time, thus benefiting the entire community. We describe some of the scientific results to date, and then focus on the challenges of the automated classification and prioritization of transient events. CRTS represents a scientific and a technological testbed and precursor for the larger surveys in the futu...

  17. Transient imaging for real-time tracking around a corner

    Science.gov (United States)

    Klein, Jonathan; Laurenzis, Martin; Hullin, Matthias

    2016-10-01

    Non-line-of-sight imaging is a fascinating emerging area of research and expected to have an impact in numerous application fields including civilian and military sensing. Performance of human perception and situational awareness can be extended by the sensing of shapes and movement around a corner in future scenarios. Rather than seeing through obstacles directly, non-line-of-sight imaging relies on analyzing indirect reflections of light that traveled around the obstacle. In previous work, transient imaging was established as the key mechanic to enable the extraction of useful information from such reflections. So far, a number of different approaches based on transient imaging have been proposed, with back projection being the most prominent one. Different hardware setups were used for the acquisition of the required data, however all of them have severe drawbacks such as limited image quality, long capture time or very high prices. In this paper we propose the analysis of synthetic transient renderings to gain more insights into the transient light transport. With this simulated data, we are no longer bound to the imperfect data of real systems and gain more flexibility and control over the analysis. In a second part, we use the insights of our analysis to formulate a novel reconstruction algorithm. It uses an adapted light simulation to formulate an inverse problem which is solved in an analysis-by-synthesis fashion. Through rigorous optimization of the reconstruction, it then becomes possible to track known objects outside the line of side in real time. Due to the forward formulation of the light transport, the algorithm is easily expandable to more general scenarios or different hardware setups. We therefore expect it to become a viable alternative to the classic back projection approach in the future.

  18. Real-Time Detection of Optical Transients with RAPTOR

    CERN Document Server

    Borozdin, K N; Galassi, M; McGowan, K; Starr, D; Vestrand, W T; White, R; Wozniak, P R; Wren, J; Borozdin, Konstantin; Brumby, Steven; Galassi, Mark; Gowan, Katherine Mc; Starr, Dan; White, Robert; Wozniak, Przemyslaw; Wren, James

    2002-01-01

    Fast variability of optical objects is an interesting though poorly explored subject in modern astronomy. Real-time data processing and identification of transient celestial events in the images is very important for such study as it allows rapid follow-up with more sensitive instruments. We discuss an approach which we have developed for the RAPTOR project, a pioneering closed-loop system combining real-time transient detection with rapid follow-up. RAPTOR's data processing pipeline is able to identify and localize an optical transient within seconds after the observation. The testing we performed so far have been confirming the effectiveness of our method for the optical transient detection. The software pipeline we have developed for RAPTOR can easily be applied to the data from other experiments.

  19. The Transient High Energy Sky and Early Universe Surveyor

    Science.gov (United States)

    O'Brien, P. T.

    2016-04-01

    The Transient High Energy Sky and Early Universe Surveyor is a mission which will be proposed for the ESA M5 call. THESEUS will address multiple components in the Early Universe ESA Cosmic Vision theme:4.1 Early Universe,4.2 The Universe taking shape, and4.3 The evolving violent Universe.THESEUS aims at vastly increasing the discovery space of the high energy transient phenomena over the entire cosmic history. This is achieved via a unique payload providing an unprecedented combination of: (i) wide and deep sky monitoring in a broad energy band(0.3 keV-20 MeV; (ii) focusing capabilities in the soft X-ray band granting large grasp and high angular resolution; and (iii) on board near-IR capabilities for immediate transient identification and first redshift estimate.The THESEUS payload consists of: (i) the Soft X--ray Imager (SXI), a set of Lobster Eye (0.3--6 keV) telescopes with CCD detectors covering a total FOV of 1 sr; (ii) the X--Gamma-rays spectrometer (XGS), a non-imaging spectrometer (XGS) based on SDD+CsI, covering the same FOV than the Lobster telescope extending the THESEUS energy band up to 20 MeV; and (iii) a 70cm class InfraRed Telescope (IRT) observing up to 2 microns with imaging and moderate spectral capabilities.The main scientific goals of THESEUS are to:(a) Explore the Early Universe (cosmic dawn and reionization era) by unveiling the Gamma--Ray Burst (GRBs) population in the first billion years}, determining when did the first stars form, and investigating the re-ionization epoch, the interstellar medium (ISM) and the intergalactic medium (IGM) at high redshifts.(b) Perform an unprecedented deep survey of the soft X-ray transient Universe in order to fill the present gap in the discovery space of new classes of transient; provide a fundamental step forward in the comprehension of the physics of various classes of Galactic and extra--Galactic transients, and provide real time trigger and accurate locations of transients for follow-up with next

  20. Plasma response to transient high voltage pulses

    Indian Academy of Sciences (India)

    S Kar; S Mukherjee

    2013-07-01

    This review reports on plasma response to transient high voltage pulses in a low pressure unmagnetized plasma. Mainly, the experiments are reviewed, when a disc electrode (metallic and dielectric) is biased pulsed negative or positive. The main aim is to review the electron loss in plasmas and particle balance during the negative pulse electrode biasing, when the applied pulse width is less than the ion plasma period. Though the applied pulse width is less than the ion plasma period, ion rarefaction waves are excited. The solitary electron holes are reviewed for positive pulsed bias to the electrode. Also the excitation of waves (solitary electron and ion holes) is reviewed for a metallic electrode covered by a dielectric material. The wave excitation during and after the pulse withdrawal, excitation and propagation characteristics of various electrostatic plasma waves are reviewed here.

  1. Average Transient Lifetime and Lyapunov Dimension for Transient Chaos in a High-Dimensional System

    Institute of Scientific and Technical Information of China (English)

    陈洪; 汤建新; 唐少炎; 向红; 陈新

    2001-01-01

    The average transient lifetime of a chaotic transient versus the Lyapunov dimension of a chaotic saddle is studied for high-dimensional nonlinear dynamical systems. Typically the average lifetime depends upon not only the system parameter but also the Lyapunov dimension of the chaotic saddle. The numerical example uses the delayed feedback differential equation.

  2. High-resolution distributed temperature sensing: a new tool to study the space-time dynamics of transient cold-air pools in the weak-wind stable boundary layer

    Science.gov (United States)

    Thomas, C. K.; Selker, J. S.; Zeeman, M. J.

    2011-12-01

    We present a novel approach to observing the two-dimensional thermal structure of atmospheric near-surface turbulent and non-turbulent flows by measuring air temperatures in a vertical plane at a high resolution (0.25 m, every approximately 2 s) using distributed temperature sensing (DTS). Air temperature observations obtained from a fiber optics array of approximate dimensions 8 by 8 m and sonic anemometer data from two levels were collected for a period of 23 days over a short grass field located in the flat bottom of a wide valley with moderate surface heterogeneity. In addition to evaluating the DTS technique to resolve the rapidly changing gradients and small-scale perturbations associated with turbulence in the atmosphere for convective and stable boundary layers, the objective was to analyze the space-time dynamics of transient cold-air pools in the stable boundary layer. The time response and precision of the fiber temperatures were adequate to resolve individual sub-meter sized turbulent and non-turbulent structures of time scales >= 3 s and enabled calculation of meaningful sensible heat fluxes when combined with vertical wind observations. The small turbulence scales associated with strong vertical shear and low measurement heights pose limitations to the technique. The top of the transient cold-air pool was highly non-stationary. The thermal structure of the near-surface air is generally a superposition of various perturbations of different time and length scales, whereas no preferred scales were identified. Vertical length scales for turbulence in the strongly stratified transient cold-air pool directly derived from the DTS data agreed well with buoyancy length scales parameterized using the vertical velocity variance and the Brunt-Vaisala frequency, while scales for weak stratification disagreed. The high-resolution DTS technique opens a new window into spatially sampling geophysical fluid flows including turbulent energy exchange with a broad

  3. First Results from the Catalina Real-time Transient Survey

    CERN Document Server

    Drake, A J; Mahabal, A; Beshore, E; Larson, S; Graham, M J; Williams, R; Christensen, E; Catelan, M; Boattini, A; Gibbs, A; Hill, R; Kowalski, R

    2008-01-01

    We report on the results from the first six months of the Catalina Real-time Transient Survey (CRTS). In order to search for optical transients with timescales of minutes to years, the CRTS analyses data from the Catalina Sky Survey which repeatedly covers twenty six thousand of square degrees on the sky. The CRTS provides a public stream of transients that are bright enough to be followed up using small telescopes. Since the beginning of the survey, all CRTS transients have been made available to astronomers around the world in real-time using HTML tables, RSS feeds and VOEvents. As part of our public outreach program the detections are now also available in KML through Google Sky. The initial discoveries include over 350 unique optical transients rising more than two magnitudes from past measurements. Sixty two of these are classified as supernovae, based on light curves, prior deep imaging and spectroscopic data. Seventy seven are due to cataclysmic variables (only 13 previously known), while an additional...

  4. Time of Flight Transients in the Dipolar Glass Model

    OpenAIRE

    2013-01-01

    Using Monte Carlo simulation we investigated time of flight current transients predicted by the dipolar glass model for a random spatial distribution of hopping centers. Behavior of the carrier drift mobility was studied at room temperature over a broad range of electric field and sample thickness. A flat plateau followed by $j\\propto t^{-2}$ current decay is the most common feature of the simulated transients. Poole-Frenkel mobility field dependence was confirmed over 5 to 200 V/$\\mu$m as we...

  5. Variable-time-delay optical coherent transient signal processing.

    Science.gov (United States)

    Merkel, K D; Babbitt, W R; Anderson, K E; Wagner, K H

    1999-10-15

    A technique is proposed and experimentally demonstrated that achieves simultaneous optical pattern waveform storage and programmable time delay for continuous real-time signal processing by use of optical coherent transient technology. We achieve variable-time-delay and broadband signal processing by frequency shifting of two chirped programming pulses, the chirp rate of one being twice that of the other, without using brief reference pulses and without changing the timing of the programming sequence. We demonstrate the technique experimentally in Tm(3+): YAG at 5 K for 40-MHz chirps by performing temporal signal convolution with true-time delays that vary over a 250-ns range.

  6. Combined system for high-time-resolution dual-excitation fluorescence photometry and fluorescence imaging of calcium transients in single normal and diseased skeletal muscle fibers

    Science.gov (United States)

    Uttenweiler, Dietmar; Wojciechowski, Reinhold; Makabe, Makoto; Veigel, Claudia; Fink, Rainer H.

    1994-12-01

    Fast photometric measurements and video-imaging of fluorescent indicators both are powerful tools in measuring the intracellular free calcium concentration of muscle and many other cells. as photometric systems yield a high temporal resolution, calcium imaging systems have high spatial but significantly reduced temporal resolution. Therefore we have developed an integrated system combining both methods and based mostly on standard components. As a common, sensitive Ca2+- indicator we used the fluorescent probe Fura-2, which is alternatingly excited for ratio measurements at 340/380 nm. We used a commercially available dual excitation photometric system (OSP-3; Olympus) for attaching a CCD-camera and a frame grabber board. To achieve the synchronization we had to design circuitries for external triggering, synchronization and accurate control of the filter changer, which we added to the system. Additionally, the software for a triggered image acquisition was developed. With this integrated setup one can easily switch between the fast photometric mode (ratio frequency 100 Hz) and the imaging mode (ratio frequency 4.17 Hz). The calcium images are correlated with the 25 times faster spot measurements and are analyzed by means of image processing. With this combined system we study release and uptake of calcium ions of normal and diseased skeletal muscle from mdx mice. Such a system will also be important for other cellular studies in which fluorescence indicators are used to monitor similar time dependent alterations as well as changes in cellular distributions of calcium.

  7. OGLE-IV Real-Time Transient Search

    CERN Document Server

    Wyrzykowski, L; Kozlowski, S; Udalski, A; Poleski, R; Skowron, J; Blagorodnova, N; Kubiak, M; Szymanski, M K; Pietrzynski, G; Soszynski, I; Ulaczyk, K; Pietrukowicz, P; Mroz, P

    2014-01-01

    We present the design and first results of a real-time search for transients within the 650 sq. deg. area around the Magellanic Clouds, conducted as part of the OGLE-IV project and aimed at detecting supernovae, novae and other events. The average sampling of about 4 days from September to May, yielded a detection of 238 transients in 2012/2013 and 2013/2014 seasons. The superb photometric and astrometric quality of the OGLE data allows for numerous applications of the discovered transients. We use this sample to prepare and train a Machine Learning-based automated classifier for early light curves, which distinguishes major classes of transients with more than 80% of correct answers. Spectroscopically classified 49 supernovae Type Ia are used to construct a Hubble Diagram with statistical scatter of about 0.3 mag and fill the least populated region of the redshifts range in the Union sample. We investigate the influence of host galaxy environments on supernovae statistics and find the mean host extinction of...

  8. Catalina Real-Time Transient Survey (CRTS): A Time Domain Resource for the Entire Community

    Science.gov (United States)

    Djorgovski, Stanislav G.; Drake, Andrew J.; Mahabal, Ashish A.; Graham, Matthew; Donalek, Ciro; Christensen, Eric J.; Larson, Stephen M.; CRTS Team

    2016-01-01

    Catalina Real-Time Transient Survey (CRTS; http://crts.caltech.edu) is systematically exploring and characterizing the faint, variable sky. It uses data streams generated by the Catalina Sky Survey, which searches for near-Earth asteroids, to search for variable objects and transient events. The CRTS survey has been in operation since 2008, with the archival data going back to 2005. The survey covers the total area of ~33,000 deg2, down to ~19-21 mag per exposure, with time baselines from 10 min to ~10 years, and growing; there are now typically ~ 200-400 exposures per pointing, and coadded images reach deeper than ~ 23 mag. The area coverage rate will increase substantially as new cameras are being deployed, and possible new data streams opened. The survey has so far detected nearly 11,000 unique, high-amplitude transients, including ~3,000 confirmed or likely supernovae (for the 5 years in a row we published more supernovae than any other survey), at least 1,500 CVs (the great majority of them previously uncatalogued), >3,000 of blazars and other AGN, and a broad variety of other types of objects.CRTS is intended to be a data resource for the entire astronomical community. We have a completely open data policy: all discovered transient events are published in real time with no proprietary delay period, and all data are made public, in order to better serve the entire community, and maximize the scientific returns. This includes an archive of ~500 million light curves, which are being updated continuously. This is an unprecedented data set for the exploration of the time domain, in terms of the area, depth, and temporal coverage.Numerous scientific projects have been enabled by this data stream, including: discoveries of ultraluminous and otherwise peculiar SNe; unusual CVs and dwarf novae; mapping of the structure in the Galactic halo using RR Lyrae; variability-based discovery of AGN and probes of their physics; etc. We also have a major effort on the automated

  9. Open Exploration of the Time Domain with the Catalina Real-Time Transient Survey (CRTS)

    Science.gov (United States)

    Djorgovski, Stanislav G.; Drake, Andrew J.; Mahabal, Ashish A.; Graham, Matthew; Donalek, Ciro; Kembhavi, Ajit; Meylan, Georges; Longo, Giuseppe; Christensen, Eric J.; Larson, Stephen M.; CRTS

    2015-01-01

    Catalina Real-Time Transient Survey (CRTS; http://crts.caltech.edu) is systematically exploring and characterizing the faint, variable sky. It uses data streams generated by the Catalina Sky Survey, which searches for near-Earth asteroids, to search for variable objects and transient events. The CRTS survey has been in operation since 2008, with the archival data going back to 2005. A continuation of the survey has been funded by the NSF, and we are forming an international consortium for an expanded and extended coverage and a broader scientific exploitation. We have a completely open data policy: all discovered transient events are published in real time with no proprietary delay period, and all data are made public, in order to better serve the entire community, and maximize the scientific returns. The survey covers the total area of ~33,000 deg2, down to ~19-21 mag per exposure, with time baselines from 10 min to ~9 years, and growing; there are now typically ~ 300-400 exposures per pointing, and coadded images reach deeper than ~ 23 mag. The area coverage rate will increase substantially as new cameras are being deployed, and possible new data streams opened. The survey has so far detected nearly 10,000 unique, high-amplitude transients, including ~2,500 supernovae (for the last 5 years we published more supernovae than any other survey), >1,200 CVs (the great majority of them previously uncatalogued), >3,000 of blazars and other AGN, and a broad variety of other types of objects. We have ~500 million light curves, which are have been made public and which are being updated continuously. This is an unprecedented data set for the exploration of the time domain, in terms of the area, depth, and temporal coverage. Numerous scientific projects have been enabled by this data stream, including: discoveries of ultraluminous and otherwise peculiar SNe; unusual CVs and dwarf novae; mapping of the structure in the Galactic halo using RR Lyrae; variability

  10. Preventing transient parametric instabilities in high power gravitational wave detectors using thermal transient compensation

    Science.gov (United States)

    Jaberian Hamedan, V.; Blair, C.; Liu, J.; Bossilkov, V.; Zhao, C.; Ju, L.; Blair, D. G.

    2017-07-01

    Laser interferometer gravitational wave detectors such as Advanced LIGO use large fused silica test masses in which temperature perturbations take many hours to reach dynamic equilibrium. When environmental disturbances cause the optical cavities to lose optical power there is a sudden thermal transient which causes the mirror profile to change significantly over time. This causes time dependent tuning of transverse optical mode frequencies, some of which cause parametric instability. These transient parametric instabilities greatly increase the complexity of active control of parametric instability. Here we report on modeling and testing of a system in which a low power CO2 laser is designed to maintain a constant heat flux when cavity power is lost, thereby enabling thermal transients to be minimized and cavity locking to be re-established. We demonstrate a reduction in the thermal transient in the optical mode spacing to  <3% of the transient without compensation. For advanced LIGO this would reduce the complexity of control systems for controlling parametric instabilities.

  11. Strongly Dispersive Transient Bragg Grating for High Harmonics

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, J.; Spector, L.S.; /SLAC, PULSE /Stanford U., Phys. Dept. /Stanford U., Appl. Phys. Dept.; Gaarde, M.B.; /SLAC, PULSE /Louisiana State U.; McFarland, B.K.; Bucksbaum, P.H.; Guhr, Markus; /SLAC, PULSE /Stanford U., Phys. Dept. /Stanford U., Appl. Phys. Dept.

    2010-06-04

    We create a transient Bragg grating in a high harmonic generation medium using two counterpropagating pulses. The Bragg grating disperses the harmonics in angle and can diffract a large bandwidth with temporal resolution limited only by the source size.

  12. Study on a transient optical fiber high temperature measurement system

    Science.gov (United States)

    Cai, Lulu; Liu, Yusha; Wang, Yutian

    2009-07-01

    High temperature is one of the most important parameters in the fields of scientific research and industrial production. At present, thermocouple, thermo resistive and radiance thermometer are already technologically mature which can be adopted to measure the general temperature, but when it comes to the transient high temperature that changes pretty quickly in wretched conditions, those traditional pyrometers can not meet the requirements any more. In this paper, we designed a transient optical high temperature measurement system. First, design of the temperature measurement probe. The system took blackbody cavity sensor together with optical fiber to receive the measured signal, here, the integrated emissivity model of the blackbody cavity was established and the optimum structure parameters were confirmed. Secondly, design of the entire temperature measurement system. A contact-noncontact measurement method was applied, which is to make the blackbody cavity and the measured high-temperature source contact, the fiber probe and the blackbody cavity noncontact, as a result, the error caused by contact measurement is overcame and the precision is guaranteed at the same time. In addition, a fiber grating was introduced as the wavelength filter device which can realize the dynamic filter of narrow-band signals and reduce the impact of background light. Thirdly, signal processing. In this part, we applied labVIEW software and wavelet analysis method. All of the signal acquisition and processing were realized in the labVIEW environment. Through calling matlab in labVIEW, the signals from optical fiber detector were wavelet denoised and decomposed, thus the temperature information was extracted, and the temperature value was obtained. On basis of wavelet transformation, the paper adopted the 4dB wavelet with horizontal scale of 5 to realize the feature extraction and noise removal, parts of the signals before and after the wavelet noise removal were given and analyzed

  13. Transient time-domain resonances and the time scale for tunneling

    CERN Document Server

    García-Calderón, G; Garc\\'{\\i}a-Calder\\'on, Gast\\'on; Villavicencio, Jorge

    2003-01-01

    Transient {\\it time-domain resonances} found recently in time-dependent solutions to Schr\\"{o}dinger's equation are used to investigate the issue of the tunneling time in rectangular potential barriers. In general, a time frequency analysis shows that these transients have frequencies above the cutoff frequency associated with the barrier height, and hence correspond to non-tunneling processes. We find, however, a regime characterized by the barrier opacity, where the peak maximum $t_{max}$ of the {\\it time-domain resonance} corresponds to under-the-barrier tunneling. We argue that $t_{max}$ represents the relevant tunneling time scale through the classically forbidden region.

  14. Real-time, fast radio transient searches with GPU de-dispersion

    Science.gov (United States)

    Magro, A.; Karastergiou, A.; Salvini, S.; Mort, B.; Dulwich, F.; Zarb Adami, K.

    2011-11-01

    The identification and subsequent discovery of fast radio transients using blind-search surveys require a large amount of processing power, in worst cases scaling as ?. For this reason, survey data are generally processed off-line, using high-performance computing architectures or hardware-based designs. In recent years, graphics processing units (GPUs) have been extensively used for numerical analysis and scientific simulations, especially after the introduction of new high-level application programming interfaces. Here, we show how GPUs can be used for fast transient discovery in real time. We present a solution to the problem of de-dispersion, providing performance comparisons with a typical computing machine and traditional pulsar processing software. We describe the architecture of a real-time, GPU-based transient search machine. In terms of performance, our GPU solution provides a speed-up factor of between 50 and 200, depending on the parameters of the search.

  15. Real-time, fast radio transient searches with GPU de-dispersion

    CERN Document Server

    Magro, Alessio; Salvini, Stefano; Mort, Benjamin; Dulwich, Fred; Adami, Kristian Zarb

    2011-01-01

    The identification, and subsequent discovery, of fast radio transients through blind-search surveys requires a large amount of processing power, in worst cases scaling as $\\mathcal{O}(N^3)$. For this reason, survey data are generally processed offline, using high-performance computing architectures or hardware-based designs. In recent years, graphics processing units have been extensively used for numerical analysis and scientific simulations, especially after the introduction of new high-level application programming interfaces. Here we show how GPUs can be used for fast transient discovery in real-time. We present a solution to the problem of de-dispersion, providing performance comparisons with a typical computing machine and traditional pulsar processing software. We describe the architecture of a real-time, GPU-based transient search machine. In terms of performance, our GPU solution provides a speed-up factor of between 50 and 200, depending on the parameters of the search.

  16. Retinal vessel diameter changes induced by transient high perfusion pressure

    Institute of Scientific and Technical Information of China (English)

    Yin-Ying; Zhao; Ping-Jun; Chang; Fang; Yu; Yun-E; Zhao

    2014-01-01

    ·AIM: To investigate the effects of transient high perfusion pressure on the retinal vessel diameter and retinal ganglion cells.·METHODS: The animals were divided into four groups according to different infusion pressure and infusion time(60 mm Hg-3min, 60 mm Hg-5min, 100 mm Hg-3min, 100 mm Hg-5min). Each group consisted of six rabbits. The left eye was used as the experimental eye and the right as a control. Retinal vascular diameters were evaluated before, during infusion, immediately after infusion, 5min, 10 min and 30 min after infusion based on the fundus photographs. Blood pressure was monitored during infusion. The eyes were removed after 24 h.Damage to retinal ganglion cell(RGC) was analyzed by histology.·RESULTS: Retina became whiten and papilla optic was pale during perfusion. Measurements showed significant decrease in retinal artery and vein diameter during perfusion in all of the four groups at the proximal of the edge of the optic disc. The changes were significant in the 100 mm Hg-3min group and 100 mm Hg-5min group compared with 60 mm Hg-3min group(P 1=0.025, P 2=0.000).The diameters in all the groups recovered completely after 30 min of reperfusion. The number of RGC)showed no significant changes at the IOP in 100 mm Hg with5 min compared with contralateral untreated eye(P >0.05).·CONCLUSION: Transient fluctuations during infusion lead to temporal changes of retinal vessels, which could affect the retinal blood circulation. The RGCs were not affected by this transient fluctuation. Further studies are necessary to evaluate the effect of pressure during realtime phacoemusification on retinal blood circulation.

  17. High power transient characteristics and capability of NSRR

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Takehiko; Kashima, Yoichi; Yachi, Shigeyasu; Yoshinaga, Makio; Terakado, Yoshibumi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Katanishi, Shoji [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

    2002-03-01

    In order to study fuel behavior under abnormal transients and accidents, the control system of the Nuclear Safety Research Reactor (NSRR) of the Japan Atomic Energy Research Institute (JAERI) was modified to achieve high power transients. With this new operational mode, called Shaped Pulse (SP), transients at the maximum power of 10 MW can be conducted for a few seconds. This new operational mode supplements the previous Natural Pulse (NP) operation at the maximum power of 23 GW for milliseconds. For high power transient operation, a simulator using a point kinetic model was developed, and characteristics of the NSRR in the new operational mode were examined through tests and calculations. With the new operational mode, new types of fuel irradiation tests simulating power oscillations of boiling water reactors (BWRs) can be conducted in the NSRR. Reactor characteristics and capability, such as control rod worth, feedback reactivity, and operational limits of the NSRR for SP operations are discussed. (author)

  18. Early-Time Observations of the GRB 050319 Optical Transient

    CERN Document Server

    Quimby, R M; Yost, S A; Aharonian, F; Akerlof, C W; Alatalo, K; Ashley, M C B; Goegues, E; Guever, T; Horns, D; Kehoe, R L; Kiziloglu, U; McKay, T A; Oezel, M; Phillips, A; Schaefer, B E; Smith, D A; Swan, H F; Vestrand, W T; Wheeler, J C; Wren, J; Kiziloglu, Ue.

    2006-01-01

    We present the unfiltered ROTSE-III light curve of the optical transient associated with GRB 050319 beginning 4 s after the cessation of gamma-ray activity. We fit a power-law function to the data using the revised trigger time given by Chincarini et al. (2005), and a smoothly broken power-law to the data using the original trigger disseminated through the GCN notices. Including the RAPTOR data from Wozniak et al. (2005), the best fit power-law indices are alpha=-0.854 (+/- 0.014) for the single power-law and alpha_1=-0.364 (+/- 0.020), alpha_2= -0.881 (+/- 0.030), with a break at t_b = 418 (+/- 30) s for the smoothly broken fit. We discuss the fit results with emphasis placed on the importance of knowing the true start time of the optical transient for this multi-peaked burst. As Swift continues to provide prompt GRB locations, it becomes more important to answer the question, "when does the afterglow begin" to correctly interpret the light curves.

  19. Need for space-time analyses of research reactor transients

    Energy Technology Data Exchange (ETDEWEB)

    Jatuff, F.E. [INVAP S.E., de Bariloche (Argentina)

    1997-12-01

    The success of the point-kinetics approximation to represent the time behavior of research reactors relies on the fact that research reactor cores are small enough to be neutronically tightly coupled; the core is small when measured in diffusion lengths. This fact implies that a certain change in a part of the core is immediately observed by the whole system. The propagation of changes is so fast that the core exhibits a shape function that is practically unchanged during the transient; the amplitude function, the only unknown of the problem, represents the full knowledge of the core response. One is immediately warned to look for the truth of this assumption. How small should a research reactor core be to be sure that point kinetics is a valid assumption? This question is becoming increasingly important because the tendency is to increase the size of research reactor cores to make them capable of various simultaneous uses (multipurpose characteristics), with powers in the range of tens of thermal megawatts. One of the lines of investigation at the Department of Reactor Physics is related to scenarios of Materials Test Reactor (MTR)-type research reactor transients for which space-time kinetics would bring a more profound insight than point kinetics.

  20. Can Transient Phenomena Help Improving Time Resolution in Scintillators?

    CERN Document Server

    Lecoq, P; Vasiliev, A

    2014-01-01

    The time resolution of a scintillator-based detector is directly driven by the density of photoelectrons generated in the photodetector at the detection threshold. At the scintillator level it is related to the intrinsic light yield, the pulse shape (rise time and decay time) and the light transport from the gamma-ray conversion point to the photodetector. When aiming at 10 ps time resolution, fluctuations in the thermalization and relaxation time of hot electrons and holes generated by the interaction of ionization radiation with the crystal become important. These processes last for up to a few tens of ps and are followed by a complex trapping-detrapping process, Poole-Frenkel effect, Auger ionization of traps and electron-hole recombination, which can last for a few ns with very large fluctuations. This paper will review the different processes at work and evaluate if some of the transient phenomena taking place during the fast thermalization phase can be exploited to extract a time tag with a precision in...

  1. Modular time division multiplexer: Efficient simultaneous characterization of fast and slow transients in multiple samples

    Science.gov (United States)

    Kim, Stephan D.; Luo, Jiajun; Buchholz, D. Bruce; Chang, R. P. H.; Grayson, M.

    2016-09-01

    A modular time division multiplexer (MTDM) device is introduced to enable parallel measurement of multiple samples with both fast and slow decay transients spanning from millisecond to month-long time scales. This is achieved by dedicating a single high-speed measurement instrument for rapid data collection at the start of a transient, and by multiplexing a second low-speed measurement instrument for slow data collection of several samples in parallel for the later transients. The MTDM is a high-level design concept that can in principle measure an arbitrary number of samples, and the low cost implementation here allows up to 16 samples to be measured in parallel over several months, reducing the total ensemble measurement duration and equipment usage by as much as an order of magnitude without sacrificing fidelity. The MTDM was successfully demonstrated by simultaneously measuring the photoconductivity of three amorphous indium-gallium-zinc-oxide thin films with 20 ms data resolution for fast transients and an uninterrupted parallel run time of over 20 days. The MTDM has potential applications in many areas of research that manifest response times spanning many orders of magnitude, such as photovoltaics, rechargeable batteries, amorphous semiconductors such as silicon and amorphous indium-gallium-zinc-oxide.

  2. Transient analysis and burnout of high temperature superconducting current leads

    Science.gov (United States)

    Seol, S. Y.; Hull, J. R.

    The transient behaviour of high-temperature superconductor (HTS) current leads operated between liquid helium and liquid nitrogen temperatures is analysed for burnout conditions upon transition of the HTS into the normal state. Leads composed of HTS only and of HTS sheathed by pure silver or silver alloy are investigated numerically for temperature-dependent properties and analytically for temperature-independent properties. For lower values of shape factor (current density times length), the lead can be operated indefinitely without burnout. At higher values of shape factor, the lead reaches burnout in a finite time. With high current densities, the leads heat adiabatically. For a fixed shape factor, low current densities are desired to achieve long burnout times. To achieve a low helium boil-off rate in the superconducting state without danger of burnout, there is a preferred temperature dependence for thermal conductivity, and silver alloy sheaths are preferred to pure silver sheaths. However, for a given current density, pure silver sheaths take longer to burn out.

  3. Transient flow characteristics of a high speed rotary valve

    Science.gov (United States)

    Browning, Patrick H.

    were experimentally mapped as a function of valve speed, inter-cylinder pressure ratios and volume ratios and the results were compared to compressible flow theoretical models. Specifically, the transient behavior suggested a short-lived loss-mode initiation closely resembled by shock tube theory followed by a quasi-steady flow regime resembling choked flow behavior. An empirical model was then employed to determine the useful range of the CCV design as applied to a four-stroke CIBAI engine cycle modeled using a 1-D quasi-steady numerical method, with particular emphasis on the cyclic timing of the CCV opening. Finally, a brief discussion of a high-temperature version of the CCV design is presented.

  4. Reduced-order description of transient instabilities and computation of finite-time Lyapunov exponents

    Science.gov (United States)

    Babaee, Hessam; Farazmand, Mohamad; Haller, George; Sapsis, Themistoklis P.

    2017-06-01

    High-dimensional chaotic dynamical systems can exhibit strongly transient features. These are often associated with instabilities that have a finite-time duration. Because of the finite-time character of these transient events, their detection through infinite-time methods, e.g., long term averages, Lyapunov exponents or information about the statistical steady-state, is not possible. Here, we utilize a recently developed framework, the Optimally Time-Dependent (OTD) modes, to extract a time-dependent subspace that spans the modes associated with transient features associated with finite-time instabilities. As the main result, we prove that the OTD modes, under appropriate conditions, converge exponentially fast to the eigendirections of the Cauchy-Green tensor associated with the most intense finite-time instabilities. Based on this observation, we develop a reduced-order method for the computation of finite-time Lyapunov exponents (FTLE) and vectors. In high-dimensional systems, the computational cost of the reduced-order method is orders of magnitude lower than the full FTLE computation. We demonstrate the validity of the theoretical findings on two numerical examples.

  5. Reduced-order description of transient instabilities and computation of finite-time Lyapunov exponents.

    Science.gov (United States)

    Babaee, Hessam; Farazmand, Mohamad; Haller, George; Sapsis, Themistoklis P

    2017-06-01

    High-dimensional chaotic dynamical systems can exhibit strongly transient features. These are often associated with instabilities that have a finite-time duration. Because of the finite-time character of these transient events, their detection through infinite-time methods, e.g., long term averages, Lyapunov exponents or information about the statistical steady-state, is not possible. Here, we utilize a recently developed framework, the Optimally Time-Dependent (OTD) modes, to extract a time-dependent subspace that spans the modes associated with transient features associated with finite-time instabilities. As the main result, we prove that the OTD modes, under appropriate conditions, converge exponentially fast to the eigendirections of the Cauchy-Green tensor associated with the most intense finite-time instabilities. Based on this observation, we develop a reduced-order method for the computation of finite-time Lyapunov exponents (FTLE) and vectors. In high-dimensional systems, the computational cost of the reduced-order method is orders of magnitude lower than the full FTLE computation. We demonstrate the validity of the theoretical findings on two numerical examples.

  6. Transient high-frequency ultrasonic water atomization

    Science.gov (United States)

    Barreras, F.; Amaveda, H.; Lozano, A.

    2002-06-01

    An experimental study was performed to improve the understanding of the characteristics of ultrasonic water atomization when excited with waves in the MHz range. In the present experiments, small volumes of water were atomized, observing the temporal evolution of the process. Typical diameters of the resulting droplets are of the order of a few microns. To visualize them, images were acquired with very high magnification. Appropriate lenses were used to enable high resolution at a distance from the flow. Droplet size distributions were also calculated with a Malvern diffractometer. Droplet exit velocity was measured using particle image velocimetry. It was noticeable that, as the remaining liquid mass deposited over the ultrasonic transducer decreased, the atomization characteristics changed, and a second peak of larger droplets appeared in the size distribution function. This phenomenon is related to the change in the curvature of the liquid surface. Although results are not conclusive, it appears that, under the conditions in this study, some observations about droplet formation are better described by cavitation phenomena rather than by the simplified surface wave theory usually invoked to explain these processes.

  7. Simulation of transients of high amplitude in pipe systems

    NARCIS (Netherlands)

    Boersma, J.M.; Looijmans, K.N.H.

    1999-01-01

    Fast high-amplitude transients ask for a non-linear modelling approach in which large density variations and heat exchange can be considered. Operation of safety-valves, relief valves, the occurrence of valve failure and the start-up or shutdown of rotating equipment in industrial pipe systems can l

  8. Parareal in time 3D numerical solver for the LWR Benchmark neutron diffusion transient model

    Energy Technology Data Exchange (ETDEWEB)

    Baudron, Anne-Marie, E-mail: anne-marie.baudron@cea.fr [Laboratoire de Recherche Conventionné MANON, CEA/DEN/DANS/DM2S and UPMC-CNRS/LJLL (France); CEA-DRN/DMT/SERMA, CEN-Saclay, 91191 Gif sur Yvette Cedex (France); Lautard, Jean-Jacques, E-mail: jean-jacques.lautard@cea.fr [Laboratoire de Recherche Conventionné MANON, CEA/DEN/DANS/DM2S and UPMC-CNRS/LJLL (France); CEA-DRN/DMT/SERMA, CEN-Saclay, 91191 Gif sur Yvette Cedex (France); Maday, Yvon, E-mail: maday@ann.jussieu.fr [Sorbonne Universités, UPMC Univ Paris 06, UMR 7598, Laboratoire Jacques-Louis Lions and Institut Universitaire de France, F-75005, Paris (France); Laboratoire de Recherche Conventionné MANON, CEA/DEN/DANS/DM2S and UPMC-CNRS/LJLL (France); Brown Univ, Division of Applied Maths, Providence, RI (United States); Riahi, Mohamed Kamel, E-mail: riahi@cmap.polytechnique.fr [Laboratoire de Recherche Conventionné MANON, CEA/DEN/DANS/DM2S and UPMC-CNRS/LJLL (France); CMAP, Inria-Saclay and X-Ecole Polytechnique, Route de Saclay, 91128 Palaiseau Cedex (France); Salomon, Julien, E-mail: salomon@ceremade.dauphine.fr [CEREMADE, Univ Paris-Dauphine, Pl. du Mal. de Lattre de Tassigny, F-75016, Paris (France)

    2014-12-15

    In this paper we present a time-parallel algorithm for the 3D neutrons calculation of a transient model in a nuclear reactor core. The neutrons calculation consists in numerically solving the time dependent diffusion approximation equation, which is a simplified transport equation. The numerical resolution is done with finite elements method based on a tetrahedral meshing of the computational domain, representing the reactor core, and time discretization is achieved using a θ-scheme. The transient model presents moving control rods during the time of the reaction. Therefore, cross-sections (piecewise constants) are taken into account by interpolations with respect to the velocity of the control rods. The parallelism across the time is achieved by an adequate use of the parareal in time algorithm to the handled problem. This parallel method is a predictor corrector scheme that iteratively combines the use of two kinds of numerical propagators, one coarse and one fine. Our method is made efficient by means of a coarse solver defined with large time step and fixed position control rods model, while the fine propagator is assumed to be a high order numerical approximation of the full model. The parallel implementation of our method provides a good scalability of the algorithm. Numerical results show the efficiency of the parareal method on large light water reactor transient model corresponding to the Langenbuch–Maurer–Werner benchmark.

  9. Implementation of SoC Based Real-Time Electromagnetic Transient Simulator

    Directory of Open Access Journals (Sweden)

    I. Herrera-Leandro

    2017-01-01

    Full Text Available Real-time electromagnetic transient simulators are important tools in the design stage of new control and protection systems for power systems. Real-time simulators are used to test and stress new devices under similar conditions that the device will deal with in a real network with the purpose of finding errors and bugs in the design. The computation of an electromagnetic transient is complex and computationally demanding, due to features such as the speed of the phenomenon, the size of the network, and the presence of time variant and nonlinear elements in the network. In this work, the development of a SoC based real-time and also offline electromagnetic transient simulator is presented. In the design, the required performance is met from two sides, (a using a technique to split the power system into smaller subsystems, which allows parallelizing the algorithm, and (b with specialized and parallel hardware designed to boost the solution flow. The results of this work have shown that for the proposed case studies, based on a balanced distribution of the node of subsystems, the proposed approach has decreased the total simulation time by up to 99 times compared with the classical approach running on a single high performance 32-bit embedded processor ARM-Cortex A9.

  10. High-speed simulation of transients in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Wulff, W.; Cheng, H.S.; Lekach, S.V.; Mallen, A.N.

    1984-01-01

    A combination of advanced modeling techniques and modern, special-purpose peripheral minicomputer technology is presented which affords realistic predictions of plant transient and severe off-normal events in LWR power plants through on-line simulations at a speed ten times greater than actual process speeds. Results are shown for a BWR plant simulation. Results are shown to demonstrate computing capacity, accuracy, and speed. Simulation speeds have been achieved which are 110 times larger than those of a CDC-7600 mainframe computer or ten times greater than real-time speed.

  11. Real-time simulation of thermal stresses and creep in plates subjected to transient heat input

    DEFF Research Database (Denmark)

    Hattel, Jesper Henri; Jacobsen, Torben Krogsdal; Hansen, P.N.

    1997-01-01

    This paper presents a novel numerical technique for solving the temperature and stress fields in a plate subjected to arbitrarily varying transient boundary conditions (transient temperature and heat-flux variations) on a surface. The numerical method is based on the control-volume finite......-difference approach. It applies a general formulation which takes into account nonconstant material properties (e.g. temperature, material, or time dependency), heat-transfer coefficients, and creep. The temperature calculation applies a one-dimensional numerical model, whereas the stress analysis is semi......-two-dimensional. Both plane stress and plane strain conditions are considered as extreme cases. It is shown that, by using the developed numerical technique, very fast real-time simulations can be performed. The method has proved its applicability in e.g. high-pressure die-casting, and applications to this industrial...

  12. Simulating transient dynamics of the time-dependent time fractional Fokker-Planck systems

    Science.gov (United States)

    Kang, Yan-Mei

    2016-09-01

    For a physically realistic type of time-dependent time fractional Fokker-Planck (FP) equation, derived as the continuous limit of the continuous time random walk with time-modulated Boltzmann jumping weight, a semi-analytic iteration scheme based on the truncated (generalized) Fourier series is presented to simulate the resultant transient dynamics when the external time modulation is a piece-wise constant signal. At first, the iteration scheme is demonstrated with a simple time-dependent time fractional FP equation on finite interval with two absorbing boundaries, and then it is generalized to the more general time-dependent Smoluchowski-type time fractional Fokker-Planck equation. The numerical examples verify the efficiency and accuracy of the iteration method, and some novel dynamical phenomena including polarized motion orientations and periodic response death are discussed.

  13. Combined Approach of PNN and Time-Frequency as the Classifier for Power System Transient Problems

    Directory of Open Access Journals (Sweden)

    Aslam Pervez Memon

    2013-04-01

    Full Text Available The transients in power system cause serious disturbances in the reliability, safety and economy of the system. The transient signals possess the nonstationary characteristics in which the frequency as well as varying time information is compulsory for the analysis. Hence, it is vital, first to detect and classify the type of transient fault and then to mitigate them. This article proposes time-frequency and FFNN (Feedforward Neural Network approach for the classification of power system transients problems. In this work it is suggested that all the major categories of transients are simulated, de-noised, and decomposed with DWT (Discrete Wavelet and MRA (Multiresolution Analysis algorithm and then distinctive features are extracted to get optimal vector as input for training of PNN (Probabilistic Neural Network classifier. The simulation results of proposed approach prove their simplicity, accurateness and effectiveness for the automatic detection and classification of PST (Power System Transient types

  14. A strategy to unveil transient sources of ultra-high-energy cosmic rays

    Directory of Open Access Journals (Sweden)

    Takami Hajime

    2013-06-01

    Full Text Available Transient generation of ultra-high-energy cosmic rays (UHECRs has been motivated from promising candidates of UHECR sources such as gamma-ray bursts, flares of active galactic nuclei, and newly born neutron stars and magnetars. Here we propose a strategy to unveil transient sources of UHECRs from UHECR experiments. We demonstrate that the rate of UHECR bursts and/or flares is related to the apparent number density of UHECR sources, which is the number density estimated on the assumption of steady sources, and the time-profile spread of the bursts produced by cosmic magnetic fields. The apparent number density strongly depends on UHECR energies under a given rate of the bursts, which becomes observational evidence of transient sources. It is saturated at the number density of host galaxies of UHECR sources. We also derive constraints on the UHECR burst rate and/or energy budget of UHECRs per source as a function of the apparent source number density by using models of cosmic magnetic fields. In order to obtain a precise constraint of the UHECR burst rate, high event statistics above ∼ 1020 eV for evaluating the apparent source number density at the highest energies and better knowledge on cosmic magnetic fields by future observations and/or simulations to better estimate the time-profile spread of UHECR bursts are required. The estimated rate allows us to constrain transient UHECR sources by being compared with the occurrence rates of known energetic transient phenomena.

  15. Method for detecting moment connection fracture using high-frequency transients in recorded accelerations

    Science.gov (United States)

    Rodgers, J.E.; Elebi, M.

    2011-01-01

    The 1994 Northridge earthquake caused brittle fractures in steel moment frame building connections, despite causing little visible building damage in most cases. Future strong earthquakes are likely to cause similar damage to the many un-retrofitted pre-Northridge buildings in the western US and elsewhere. Without obvious permanent building deformation, costly intrusive inspections are currently the only way to determine if major fracture damage that compromises building safety has occurred. Building instrumentation has the potential to provide engineers and owners with timely information on fracture occurrence. Structural dynamics theory predicts and scale model experiments have demonstrated that sudden, large changes in structure properties caused by moment connection fractures will cause transient dynamic response. A method is proposed for detecting the building-wide level of connection fracture damage, based on observing high-frequency, fracture-induced transient dynamic responses in strong motion accelerograms. High-frequency transients are short (Elsevier B.V. All rights reserved.

  16. A table-top femtosecond time-resolved soft x-ray transient absorption spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Leone, Stephen; Loh, Zhi-Heng; Khalil, Munira; Correa, Raoul E.; Leone, Stephen R.

    2008-05-21

    A laser-based, table-top instrument is constructed to perform femtosecond soft x-ray transient absorption spectroscopy. Ultrashort soft x-ray pulses produced via high-order harmonic generation of the amplified output of a femtosecond Ti:sapphire laser system are used to probe atomic core-level transient absorptions in atoms and molecules. The results provide chemically specific, time-resolved dynamics with sub-50-fs time resolution. In this setup, high-order harmonics generated in a Ne-filled capillary waveguide are refocused by a gold-coated toroidal mirror into the sample gas cell, where the soft x-ray light intersects with an optical pump pulse. The transmitted high-order harmonics are spectrally dispersed with a home-built soft x-ray spectrometer, which consists of a gold-coated toroidal mirror, a uniform-line spaced plane grating, and a soft x-ray CCD camera. The optical layout of the instrument, design of the soft x-ray spectrometer, and spatial and temporal characterization of the high-order harmonics are described. Examples of static and time-resolved photoabsorption spectra collected on this apparatus are presented.

  17. Broadband ultraviolet-visible transient absorption spectroscopy in the nanosecond to microsecond time domain with sub-nanosecond time resolution.

    Science.gov (United States)

    Lang, Bernhard; Mosquera-Vázquez, Sandra; Lovy, Dominique; Sherin, Peter; Markovic, Vesna; Vauthey, Eric

    2013-07-01

    A combination of sub-nanosecond photoexcitation and femtosecond supercontinuum probing is used to extend femtosecond transient absorption spectroscopy into the nanosecond to microsecond time domain. Employing a passively Q-switched frequency tripled Nd:YAG laser and determining the jitter of the time delay between excitation and probe pulses with a high resolution time delay counter on a single-shot basis leads to a time resolution of 350 ps in picosecond excitation mode. The time overlap of almost an order of magnitude between fs and sub-ns excitation mode permits to extend ultrafast transient absorption (TA) experiments seamlessly into time ranges traditionally covered by laser flash photolysis. The broadband detection scheme eases the identification of intermediate reaction products which may remain undetected in single-wavelength detection flash photolysis arrangements. Single-shot referencing of the supercontinuum probe with two identical spectrometer/CCD arrangements yields an excellent signal-to-noise ratio for the so far investigated chromophores in short to moderate accumulation times.

  18. Development of a semi-automated high throughput transient transfection system.

    Science.gov (United States)

    Bos, Aaron B; Duque, Joseph N; Bhakta, Sunil; Farahi, Farzam; Chirdon, Lindsay A; Junutula, Jagath R; Harms, Peter D; Wong, Athena W

    2014-06-20

    Transient transfection of mammalian cells provides a rapid method of producing protein for research purposes. Combining the transient transfection protein expression system with new automation technologies developed for the biotechnology industry would enable a high throughput protein production platform that could be utilized to generate a variety of different proteins in a short amount of time. These proteins could be used for an assortment of studies including proof of concept, antibody development, and biological structure and function. Here we describe such a platform: a semi-automated process for PEI-mediated transient protein production in tubespins at a throughput of 96 transfections at a time using a Biomek FX(P) liquid handling system. In one batch, 96 different proteins can be produced in milligram amounts by PEI transfection of HEK293 cells cultured in 50 mL tubespins. Methods were developed for the liquid handling system to automate the different processes associated with transient transfections such as initial cell seeding, DNA:PEI complex activation and DNA:PEI complex addition to the cells. Increasing DNA:PEI complex incubation time resulted in lower protein expression. To minimize protein production variability, the methods were further optimized to achieve consistent cell seeding, control the DNA:PEI incubation time and prevent cross-contamination among different tubespins. This semi-automated transfection process was applied to express 520 variants of a human IgG1 (hu IgG1) antibody.

  19. Super-transient scaling in time-delay autonomous Boolean network motifs

    Science.gov (United States)

    D'Huys, Otti; Lohmann, Johannes; Haynes, Nicholas D.; Gauthier, Daniel J.

    2016-09-01

    Autonomous Boolean networks are commonly used to model the dynamics of gene regulatory networks and allow for the prediction of stable dynamical attractors. However, most models do not account for time delays along the network links and noise, which are crucial features of real biological systems. Concentrating on two paradigmatic motifs, the toggle switch and the repressilator, we develop an experimental testbed that explicitly includes both inter-node time delays and noise using digital logic elements on field-programmable gate arrays. We observe transients that last millions to billions of characteristic time scales and scale exponentially with the amount of time delays between nodes, a phenomenon known as super-transient scaling. We develop a hybrid model that includes time delays along network links and allows for stochastic variation in the delays. Using this model, we explain the observed super-transient scaling of both motifs and recreate the experimentally measured transient distributions.

  20. Super-transient scaling in time-delay autonomous Boolean network motifs.

    Science.gov (United States)

    D'Huys, Otti; Lohmann, Johannes; Haynes, Nicholas D; Gauthier, Daniel J

    2016-09-01

    Autonomous Boolean networks are commonly used to model the dynamics of gene regulatory networks and allow for the prediction of stable dynamical attractors. However, most models do not account for time delays along the network links and noise, which are crucial features of real biological systems. Concentrating on two paradigmatic motifs, the toggle switch and the repressilator, we develop an experimental testbed that explicitly includes both inter-node time delays and noise using digital logic elements on field-programmable gate arrays. We observe transients that last millions to billions of characteristic time scales and scale exponentially with the amount of time delays between nodes, a phenomenon known as super-transient scaling. We develop a hybrid model that includes time delays along network links and allows for stochastic variation in the delays. Using this model, we explain the observed super-transient scaling of both motifs and recreate the experimentally measured transient distributions.

  1. Real-Time Time-Frequency Two-Dimensional Imaging of Ultrafast Transient Signals in Solid-State Organic Materials

    Directory of Open Access Journals (Sweden)

    Jun Takeda

    2010-04-01

    Full Text Available In this review, we demonstrate a real-time time-frequency two-dimensional (2D pump-probe imaging spectroscopy implemented on a single shot basis applicable to excited-state dynamics in solid-state organic and biological materials. Using this technique, we could successfully map ultrafast time-frequency 2D transient absorption signals of β-carotene in solid films with wide temporal and spectral ranges having very short accumulation time of 20 ms per unit frame. The results obtained indicate the high potential of this technique as a powerful and unique spectroscopic tool to observe ultrafast excited-state dynamics of organic and biological materials in solid-state, which undergo rapid photodegradation.

  2. Bipolar square-wave current source for transient electromagnetic systems based on constant shutdown time

    Science.gov (United States)

    Wang, Shilong; Yin, Changchun; Lin, Jun; Yang, Yu; Hu, Xueyan

    2016-03-01

    Cooperative work of multiple magnetic transmitting sources is a new trend in the development of transient electromagnetic system. The key is the bipolar current waves shutdown, concurrently in the inductive load. In the past, it was difficult to use the constant clamping voltage technique to realize the synchronized shutdown of currents with different peak values. Based on clamping voltage technique, we introduce a new controlling method with constant shutdown time. We use the rising time to control shutdown time and use low voltage power source to control peak current. From the viewpoint of the circuit energy loss, by taking the high-voltage capacitor bypass resistance and the capacitor of the passive snubber circuit into account, we establish the relationship between the rising time and the shutdown time. Since the switch is not ideal, we propose a new method to test the shutdown time by the low voltage, the high voltage and the peak current. Experimental results show that adjustment of the current rising time can precisely control the value of the clamp voltage. When the rising time is fixed, the shutdown time is unchanged. The error for shutdown time deduced from the energy consumption is less than 6%. The new controlling method on current shutdown proposed in this paper can be used in the cooperative work of borehole and ground transmitting system.

  3. Bipolar square-wave current source for transient electromagnetic systems based on constant shutdown time.

    Science.gov (United States)

    Wang, Shilong; Yin, Changchun; Lin, Jun; Yang, Yu; Hu, Xueyan

    2016-03-01

    Cooperative work of multiple magnetic transmitting sources is a new trend in the development of transient electromagnetic system. The key is the bipolar current waves shutdown, concurrently in the inductive load. In the past, it was difficult to use the constant clamping voltage technique to realize the synchronized shutdown of currents with different peak values. Based on clamping voltage technique, we introduce a new controlling method with constant shutdown time. We use the rising time to control shutdown time and use low voltage power source to control peak current. From the viewpoint of the circuit energy loss, by taking the high-voltage capacitor bypass resistance and the capacitor of the passive snubber circuit into account, we establish the relationship between the rising time and the shutdown time. Since the switch is not ideal, we propose a new method to test the shutdown time by the low voltage, the high voltage and the peak current. Experimental results show that adjustment of the current rising time can precisely control the value of the clamp voltage. When the rising time is fixed, the shutdown time is unchanged. The error for shutdown time deduced from the energy consumption is less than 6%. The new controlling method on current shutdown proposed in this paper can be used in the cooperative work of borehole and ground transmitting system.

  4. Searching for fast optical transients by means of a wide-field monitoring observations with high temporal resolution

    Science.gov (United States)

    Beskin, G.; Karpov, S.; Plokhotnichenko, V.; Bondar, S.; Ivanov, E.; Perkov, A.; Greco, G.; Guarnieri, A.; Bartolini, C.

    We discuss the strategy of search for fast optical transients accompanying gamma-ray bursts by means of continuous monitoring of wide sky fields with high temporal resolution. We describe the design, performance and results of our cameras, FAVOR and TORTORA. Also we discuss the perspectives of this strategy and possible design of next-generation equipment for wide-field monitoring which will be able to detect optical transients and to study their color and polarization properties with high time resolution.

  5. New Methods for Timing Analysis of Transient Events, Applied to Fermi/GBM Magnetar Bursts

    CERN Document Server

    Huppenkothen, Daniela; Uttley, Phil; van der Horst, Alexander J; van der Klis, Michiel; Kouveliotou, Chryssa; Gogus, Ersin; Granot, Jonathan; Vaughan, Simon; Finger, Mark H

    2013-01-01

    In order to discern the physical nature of many gamma-ray sources in the sky, we must look not only in spectral and spatial dimensions, but also understand their temporal variability. However, timing analysis of sources with a highly transient nature, such as magnetar bursts, is difficult: standard Fourier techniques developed for long-term variability generally observed, for example, from AGN often do not apply. Here, we present newly developed timing methods applicable to transient events of all kinds, and show their successful application to magnetar bursts observed with Fermi/GBM. Magnetars are a prime subject for timing studies, thanks to the detection of quasi-periodicities in magnetar Giant Flares and their potential to help shed light on the structure of neutron stars. Using state-of-the art statistical techniques, we search for quasi-periodicities (QPOs) in a sample of bursts from Soft Gamma Repeater SGR J0501+4516 observed with Fermi/GBM and provide upper limits for potential QPO detections. Additio...

  6. Parareal in time 3D numerical solver for the LWR Benchmark neutron diffusion transient model

    CERN Document Server

    Baudron, Anne-Marie A -M; Maday, Yvon; Riahi, Mohamed Kamel; Salomon, Julien

    2014-01-01

    We present a parareal in time algorithm for the simulation of neutron diffusion transient model. The method is made efficient by means of a coarse solver defined with large time steps and steady control rods model. Using finite element for the space discretization, our implementation provides a good scalability of the algorithm. Numerical results show the efficiency of the parareal method on large light water reactor transient model corresponding to the Langenbuch-Maurer-Werner (LMW) benchmark [1].

  7. Mixed time integration schemes for transient conduction forced-convection analysis

    Science.gov (United States)

    Liu, W. K.; Lin, J. I.

    1983-01-01

    A partition procedure for forced-convection conduction transient problems is presented. Mixed time partitions are defined wherein coupled conduction force-matrix equations are discretized using an implicit integration method, followed by derivation of a mixed time integration technique. Explicit-implicit and explicit-explicit partitions are performed for a stability analysis for transient conditions, e.g., those found in an actively air-cooled engine and airframe structure.

  8. Transient evolution and high stratification scaling in horizontal mixing layers

    Science.gov (United States)

    Arratia, C.; Ortiz, S.; Chomaz, J. M.

    Mixing layers (sheared flows in homogeneous or stratified fluid) are present in many geophysical contexts and may lead to turbulence and mixing. In several cases, mixing layers are known to exhibit the Kelvin-Helmholtz instability leading to the roll-up of spanwise vortices, the Kelvin-Helmholtz (KH) billows. This is an essentially two-dimensional (2D) process. In fact, in the homogeneous cases the Squire's theorem implies that the most unstable mode is 2D. However, Squire's theorem applies only for the exponentially growing perturbations that control the large time dynamics and is not valid for the transient dynamics at short time. Indeed, Iams et al.[1] have shown that, in the non-stratified case, the most amplified optimal perturbations for short times are three-dimensional (3D) and result from a cooperation between the lift-up and Orr mechanisms[2]. This provides a finite time mechanism for spanwise scale selection, scale that may persist at later times if nonlinearities are strong enough.

  9. Simulation of transient viscoelastic flow with second order time integration

    DEFF Research Database (Denmark)

    Rasmussen, Henrik Koblitz; Hassager, Ole

    1995-01-01

    The Lagrangian Integral Method (LIM) for the simulation of time-dependent flow of viscoelastic fluids is extended to second order accuracy in the time integration. The method is tested on the established sphere in a cylinder benchmark problem.......The Lagrangian Integral Method (LIM) for the simulation of time-dependent flow of viscoelastic fluids is extended to second order accuracy in the time integration. The method is tested on the established sphere in a cylinder benchmark problem....

  10. Enabling Near Real-Time Remote Search for Fast Transient Events with Lossy Data Compression

    Science.gov (United States)

    Vohl, Dany; Pritchard, Tyler; Andreoni, Igor; Cooke, Jeffrey; Meade, Bernard

    2017-09-01

    We present a systematic evaluation of JPEG2000 (ISO/IEC 15444) as a transport data format to enable rapid remote searches for fast transient events as part of the Deeper Wider Faster programme. Deeper Wider Faster programme uses 20 telescopes from radio to gamma rays to perform simultaneous and rapid-response follow-up searches for fast transient events on millisecond-to-hours timescales. Deeper Wider Faster programme search demands have a set of constraints that is becoming common amongst large collaborations. Here, we focus on the rapid optical data component of Deeper Wider Faster programme led by the Dark Energy Camera at Cerro Tololo Inter-American Observatory. Each Dark Energy Camera image has 70 total coupled-charged devices saved as a 1.2 gigabyte FITS file. Near real-time data processing and fast transient candidate identifications-in minutes for rapid follow-up triggers on other telescopes-requires computational power exceeding what is currently available on-site at Cerro Tololo Inter-American Observatory. In this context, data files need to be transmitted rapidly to a foreign location for supercomputing post-processing, source finding, visualisation and analysis. This step in the search process poses a major bottleneck, and reducing the data size helps accommodate faster data transmission. To maximise our gain in transfer time and still achieve our science goals, we opt for lossy data compression-keeping in mind that raw data is archived and can be evaluated at a later time. We evaluate how lossy JPEG2000 compression affects the process of finding transients, and find only a negligible effect for compression ratios up to 25:1. We also find a linear relation between compression ratio and the mean estimated data transmission speed-up factor. Adding highly customised compression and decompression steps to the science pipeline considerably reduces the transmission time-validating its introduction to the Deeper Wider Faster programme science pipeline and

  11. Transient voltage sharing in series-coupled high voltage switches

    Directory of Open Access Journals (Sweden)

    Editorial Office

    1992-07-01

    Full Text Available For switching voltages in excess of the maximum blocking voltage of a switching element (for example, thyristor, MOSFET or bipolar transistor such elements are often coupled in series - and additional circuitry has to be provided to ensure equal voltage sharing. Between each such series element and system ground there is a certain parasitic capacitance that may draw a significant current during high-speed voltage transients. The "open" switch is modelled as a ladder network. Analy­sis reveals an exponential progression in the distribution of the applied voltage across the elements. Overstressing thus oc­curs in some of the elements at levels of the total voltage that are significantly below the design value. This difficulty is overcome by grading the voltage sharing circuitry, coupled in parallel with each element, in a prescribed manner, as set out here.

  12. Transient Loschmidt Echo and Orthogonality Catastrophe in highly excited Quantum Ising Spin Chains

    Science.gov (United States)

    Schiro, Marco; Lupo, Carla

    We study the response to sudden local perturbations of highly excited Quantum Ising Spin Chains. The key quantity encoding this response is the overlap between time-dependent wave functions, which we write as a transient Loschmidt echo. We compute the Echo perturbatively in the case of a weak local quench and study its asymptotics at long times, which contains crucial information about the structure of the highly excited non-equilibrium environment induced by the quench. Our results reveal that the Echo decays exponentially, rather than power law as in the low-energy Orthogonality Catastrophe, a further example of quench-induced decoherence. The emerging decoherence scale is set by the strenght of the local potential and the bulk excitation energy. In addition, the transient evolution features aging behavior at the Ising quantum critical point.

  13. High-energy transients with Fermi/GBM

    Energy Technology Data Exchange (ETDEWEB)

    Gruber, David

    2012-10-09

    For most of mankind's history, astronomy was performed on-ground in the optical energy range. It was only when space-based missions, built more than 50 years ago, detected photons with mind-boggling energies that the exploration of the violent Universe really began. These {gamma}-ray photons still provide us with an unprecedented wealth of information for the most energetic processes taking place in the cosmos. Faithful to the olympic slogan ''higher, faster, further'', an increasing armada of {gamma}-ray satellites was built and launched over the last couple of decades with Fermi being the youngest of its kind. In this thesis, I use data from the Gamma-Ray Burst Monitor (GBM) onboard the Fermi satellite. The focus of this work lies on three very different classes of high-energy astrophysical transients: Gamma-Ray Bursts (GRBs), solar flares and Soft Gamma Repeaters (SGRs). In Chapter 2, I present GRB 091024A, a burst of very long duration in {gamma}-rays where optical data could be acquired well during its active phase. The optical light curve shows very intriguing features which I subsequently interpret as the so called ''optical flash'', a fundamental property of the ''fireball'' model. Although predicted by the latter model, only a handful of GRBs show such a behavior, making them interesting transients to study. Furthermore, I present the fundamental temporal and spectral properties of 47 GBM-detected GRBs with known redshifts. As GRBs explode at cosmological distances it is of uttermost importance to study them in their restframe to get a better understanding of their emission mechanisms. I confirm several correlations already found in the past together with an intriguing connection between redshift and the peak energy (E{sub peak}) of GRBs. Although this correlation is heavily influenced by instrumental effects, it is not unexpected from other experimental results, giving it more credibility

  14. A search for long-time-scale, low-frequency radio transients

    Science.gov (United States)

    Murphy, Tara; Kaplan, David L.; Croft, Steve; Lynch, Christene; Callingham, J. R.; Bannister, Keith; Bell, Martin E.; Hurley-Walker, Natasha; Hancock, Paul; Line, Jack; Rowlinson, Antonia; Lenc, Emil; Intema, H. T.; Jagannathan, P.; Ekers, Ronald D.; Tingay, Steven; Yuan, Fang; Wolf, Christian; Onken, Christopher A.; Dwarakanath, K. S.; For, B.-Q.; Gaensler, B. M.; Hindson, L.; Johnston-Hollitt, M.; Kapińska, A. D.; McKinley, B.; Morgan, J.; Offringa, A. R.; Procopio, P.; Staveley-Smith, L.; Wayth, R.; Wu, C.; Zheng, Q.

    2017-04-01

    We present a search for transient and highly variable sources at low radio frequencies (150-200 MHz) that explores long time-scales of 1-3 yr. We conducted this search by comparing the TIFR GMRT Sky Survey Alternative Data Release 1 (TGSS ADR1) and the GaLactic and Extragalactic All-sky Murchison Widefield Array (GLEAM) survey catalogues. To account for the different completeness thresholds in the individual surveys, we searched for compact GLEAM sources above a flux density limit of 100 mJy that were not present in the TGSS ADR1; and also for compact TGSS ADR1 sources above a flux density limit of 200 mJy that had no counterpart in GLEAM. From a total sample of 234 333 GLEAM sources and 275 612 TGSS ADR1 sources in the overlap region between the two surveys, there were 99 658 GLEAM sources and 38 978 TGSS ADR sources that passed our flux density cut-off and compactness criteria. Analysis of these sources resulted in three candidate transient sources. Further analysis ruled out two candidates as imaging artefacts. We analyse the third candidate and show it is likely to be real, with a flux density of 182 ± 26 mJy at 147.5 MHz. This gives a transient surface density of ρ = (6.2 ± 6) × 10-5 deg-2. We present initial follow-up observations and discuss possible causes for this candidate. The small number of spurious sources from this search demonstrates the high reliability of these two new low-frequency radio catalogues.

  15. Uniqueness of system response time for transient condensing flows

    Energy Technology Data Exchange (ETDEWEB)

    Wedekind, G.L.; Bhatt, B.L. (Oakland Univ., Rochester, MI (United States)); Beck, B.T. (Kansas State Univ., Manhattan (United States)); Roslund, G.L. (General Motors Corp., Detroit, MI (United States))

    1989-11-01

    The unique characteristics under consideration in this paper are encountered in condensing flows, and have to do with a system's response time for various degrees of outlet flow quality. Specifically, the system response time for condensing flows appears to increase monotonically with decreasing outlet flow quality, reaching a maximum for systems having an outlet flow quality of between 10 and 20%. The system response time then decreases for outlet flow qualities that are less than that value. These unique characteristics are predicted theoretically by system mean void fraction model. The purpose of this paper is to develop analytically the characteristics, explain the physics of the phenomena responsible, and discuss the experimental verification efforts that have thus far been carried out.

  16. Energy efficient approach for transient fault recovery in real time ...

    African Journals Online (AJOL)

    DR OKE

    Earliest Deadline First (EDF) and RM (Rate monotonic) scheduling approach are used for scheduling real .... Zhang, Y., Chakrabarty, K.,“Energy-aware adaptive checkpointing in embeddedreal-time systems”. ... In Euromicro Workshop on. Parallel and Distributed Processing, Mantova, Italy, February 2001. ... Architecture.

  17. Partial control of chaotic transients using escape times

    Energy Technology Data Exchange (ETDEWEB)

    Sabuco, Juan; Zambrano, Samuel; Sanjuan, Miguel A F, E-mail: juan.sabuco@urjc.e [Departamento de Fisica, Universidad Rey Juan Carlos, Tulipan s/n, 28933 Mostoles, Madrid (Spain)

    2010-11-15

    The partial control technique allows one to keep the trajectories of a dynamical system inside a region where there is a chaotic saddle and from which nearly all the trajectories diverge. Its main advantage is that this goal is achieved even if the corrections applied to the trajectories are smaller than the action of environmental noise on the dynamics, a counterintuitive result that is obtained by using certain safe sets. Using the Henon map as a paradigm, we show here the deep relationship between the safe sets and the sets of points with different escape times, the escape time sets. Furthermore, we show that it is possible to find certain extended safe sets that can be used instead of the safe sets in the partial control technique. Numerical simulations confirm our findings and show that in some situations, the use of extended safe sets can be more advantageous.

  18. Transient habitats limit development time for periodical cicadas.

    Science.gov (United States)

    Karban, Richard

    2014-01-01

    Periodical cicadas (Magicicada spp.) mature in 13 or 17 years, the longest development times for any non-diapausing insects. Selection may favor prolonged development since nymphs experience little mortality and individuals taking 17 years have been shown to have greater fecundity than those taking 13 years. Why don't periodical cicadas take even longer to develop? Nymphs feed on root xylem fluid and move little. Ovipositing females prefer fast-growing trees at forest edges. I hypothesized that (1) adults emerging at edges would be heavier than those from forest interiors and (2) habitat changes could limit development time. I collected newly eclosed females that had neither fed as adults nor moved from their site of development. For M. septendecim, females from edges were 4.9% heavier than those from the interior. I assumed that emergence density indicated habitat quality and measured density at eight sites in 1979, 1996, and 2013. Over three generations, variation in densities was great; densities at two sites crashed, and at one site they exploded to 579/m2 Habitat transience may limit development time because only adults can reassess habitats and reposition offspring. In conclusion, cicadas are affected by habitat characteristics, habitats change over 17 years, and cicadas may emerge, mate, and redistribute their offspring to track habitat dynamics.

  19. Random telegraph signal transients in active logarithmic continuous-time vision sensors

    Science.gov (United States)

    Pardo, Fernando; Boluda, Jose A.; Vegara, Francisco

    2015-12-01

    Random Telegraph Signal (RTS) is a well-known source of noise in current submicron circuits. Its static effects have been widely studied and its noise levels are in the order of other noise sources, especially for moderate submicron transistors. Nevertheless, RTS events may produce transients many times larger than the RTS itself, and this problem seems to have not yet been addressed. In this article we present results on the transients produced by RTS events in a smart vision sensor. RTS transients in closed-loop amplifiers can be many times greater than static RTS. The duration of the RTS transient may last for several milliseconds, and can be considered almost stationary for some conditions. The RTS transient effect has been modelled, and its impact on event-based vision sensors has been studied. This analysis may be also useful for many circuits based on closed-loop amplifiers. Some hints on how to reduce RTS transient effects on these sensors are also given, which may help with the design of current and future event-based vision sensors.

  20. The Transient High Energy Sky and Early Universe Surveyor (THESEUS)

    Science.gov (United States)

    Amati, Lorenzo; O'Brien, Paul T.; Götz, Diego

    2016-07-01

    The Transient High Energy Sky and Early Universe Surveyor (THESEUS) is a mission concept under development by a large international collaboration aimed at exploiting gamma-ray bursts for investigating the early Universe. The main scientific objectives of THESEUS include: investigating the star formation rate and metallicity evolution of the ISM and IGM up to redshift 9-10, detecting the first generation (pop III) of stars, studying the sources and physics of re-ionization, detecting the faint end of galaxies luminosity function. These goals will be achieved through a unique combination of instruments allowing GRB detection and arcmin localization over a broad FOV (more than 1sr) and an energy band extending from several MeVs down to 0.3 keV with unprecedented sensitivity, as well as on-board prompt (few minutes) follow-up with a 0.6m class IR telescope with both imaging and spectroscopic capabilities. Such instrumentation will also allow THESEUS to unveil and study the population of soft and sub-energetic GRBs, and, more in general, to perform monitoring and survey of the X-ray sky with unprecedented sensitivity.

  1. Arctic underwater noise transients from sea ice deformation: Characteristics, annual time series, and forcing in Beaufort Sea.

    Science.gov (United States)

    Kinda, G Bazile; Simard, Yvan; Gervaise, Cédric; Mars, Jérôme I; Fortier, Louis

    2015-10-01

    A 13-month time series of Arctic Ocean noise from the marginal ice zone of the Eastern Beaufort Sea is analyzed to detect under-ice acoustic transients isolated from ambient noise with a dedicated algorithm. Noise transients due to ice cracking, fracturing, shearing, and ridging are sorted out into three categories: broadband impulses, frequency modulated (FM) tones, and high-frequency broadband noise. Their temporal and acoustic characteristics over the 8-month ice covered period, from November 2005 to mid-June 2006, are presented and their generation mechanisms are discussed. Correlations analyses showed that the occurrence of these ice transients responded to large-scale ice motion and deformation rates forced by meteorological events, often leading to opening of large-scale leads at main discontinuities in the ice cover. Such a sequence, resulting in the opening of a large lead, hundreds by tens of kilometers in size, along the margin of landfast ice and multiyear ice plume in the Beaufort-Chukchi seas is detailed. These ice transients largely contribute to the soundscape properties of the Arctic Ocean, for both its ambient and total noise components. Some FM tonal transients can be confounded with marine mammal songs, especially when they are repeated, with periods similar to wind generated waves.

  2. Investigation of the Adaptability of Transient Stability Assessment Methods to Real-Time Operation

    DEFF Research Database (Denmark)

    Weckesser, Johannes Tilman Gabriel; Jóhannsson, Hjörtur; Sommer, Stefan

    2012-01-01

    In this paper, an investigation of the adaptability of available transient stability assessment methods to real-time operation and their real-time performance is carried out. Two approaches based on Lyapunov’s method and the equal area criterion are analyzed. The results allow to determine...

  3. Time-Frequency Analysis of Rocket Nozzle Wall Pressures During Start-up Transients

    Science.gov (United States)

    Baars, Woutijn J.; Tinney, Charles E.; Ruf, Joseph H.

    2011-01-01

    Surveys of the fluctuating wall pressure were conducted on a sub-scale, thrust- optimized parabolic nozzle in order to develop a physical intuition for its Fourier-azimuthal mode behavior during fixed and transient start-up conditions. These unsteady signatures are driven by shock wave turbulent boundary layer interactions which depend on the nozzle pressure ratio and nozzle geometry. The focus however, is on the degree of similarity between the spectral footprints of these modes obtained from transient start-ups as opposed to a sequence of fixed nozzle pressure ratio conditions. For the latter, statistically converged spectra are computed using conventional Fourier analyses techniques, whereas the former are investigated by way of time-frequency analysis. The findings suggest that at low nozzle pressure ratios -- where the flow resides in a Free Shock Separation state -- strong spectral similarities occur between fixed and transient conditions. Conversely, at higher nozzle pressure ratios -- where the flow resides in Restricted Shock Separation -- stark differences are observed between the fixed and transient conditions and depends greatly on the ramping rate of the transient period. And so, it appears that an understanding of the dynamics during transient start-up conditions cannot be furnished by a way of fixed flow analysis.

  4. Space-time analysis of Down syndrome: results consistent with transient pre-disposing contagious agent.

    Science.gov (United States)

    McNally, Richard J Q; Rankin, Judith; Shirley, Mark D F; Rushton, Stephen P; Pless-Mulloli, Tanja

    2008-10-01

    Whilst maternal age is an established risk factor for Patau syndrome (trisomy 13), Edwards syndrome (trisomy 18) and Down syndrome (trisomy 21), the aetiology and contribution of genetic and environmental factors remains unclear. We analysed for space-time clustering using high quality fully population-based data from a geographically defined region. The study included all cases of Patau, Edwards and Down syndrome, delivered during 1985-2003 and resident in the former Northern Region of England, including terminations of pregnancy for fetal anomaly. We applied the K-function test for space-time clustering with fixed thresholds of close in space and time using residential addresses at time of delivery. The Knox test was used to indicate the range over which the clustering effect occurred. Tests were repeated using nearest neighbour (NN) thresholds to adjust for variable population density. The study analysed 116 cases of Patau syndrome, 240 cases of Edwards syndrome and 1084 cases of Down syndrome. There was evidence of space-time clustering for Down syndrome (fixed threshold of close in space: P = 0.01, NN threshold: P = 0.02), but little or no clustering for Patau (P = 0.57, P = 0.19) or Edwards (P = 0.37, P = 0.06) syndromes. Clustering of Down syndrome was associated with cases from more densely populated areas and evidence of clustering persisted when cases were restricted to maternal age syndrome suggests an aetiological role for transient environmental factors, such as infections.

  5. Small quantum absorption refrigerator in the transient regime: Time scales, enhanced cooling, and entanglement.

    Science.gov (United States)

    Brask, Jonatan Bohr; Brunner, Nicolas

    2015-12-01

    A small quantum absorption refrigerator, consisting of three qubits, is discussed in the transient regime. We discuss time scales for coherent dynamics, damping, and approach to the steady state, and we study cooling and entanglement. We observe that cooling can be enhanced in the transient regime, in the sense that lower temperatures can be achieved compared to the steady-state regime. This is a consequence of coherent dynamics but can occur even when this dynamics is strongly damped by the dissipative thermal environment, and we note that precise control over couplings or timing is not needed to achieve enhanced cooling. We also show that the amount of entanglement present in the refrigerator can be much larger in the transient regime compared to the steady state. These results are of relevance to future implementations of quantum thermal machines.

  6. The High Cadence Transient Survey (HiTS) - I. Survey design and supernova shock breakout constraints

    CERN Document Server

    Förster, Francisco; Martín, Jaime San; Hamuy, Mario; Martínez, Jorge; Huijse, Pablo; Cabrera, Guillermo; Galbany, Lluís; de Jaeger, Thomas; González-Gaitán, Santiago; Anderson, Joseph P; Kuncarayakti, Hanindyo; Pignata, Giuliano; Bufano, Filomena; Littín, Jorge; Olivares, Felipe; Medina, Gustavo; Smith, R Chris; Vivas, A Katherina; Estévez, Pablo A; Muñoz, Ricardo; Vera, Eduardo

    2016-01-01

    We present the first results of the High cadence Transient Survey (HiTS), a survey whose objective is to detect and follow up optical transients with characteristic timescales from hours to days, especially the earliest hours of supernova (SN) explosions. HiTS uses the Dark Energy Camera (DECam) and a custom made pipeline for image subtraction, candidate filtering and candidate visualization, which runs in real-time to be able to react rapidly to the new transients. We discuss the survey design, the technical challenges associated with the real-time analysis of these large volumes of data and our first results. In our 2013, 2014 and 2015 campaigns we have detected more than 120 young SN candidates, but we did not find a clear signature from the short-lived SN shock breakouts (SBOs) originating after the core collapse of red supergiant stars, which was the initial science aim of this survey. Using the empirical distribution of limiting-magnitudes from our observational campaigns we measured the expected recove...

  7. A numerical algorithm to evaluate the transient response for a synchronous scanning streak camera using a time-domain Baum–Liu–Tesche equation

    Energy Technology Data Exchange (ETDEWEB)

    Pei, Chengquan [Key Laboratory for Physical Electronics and Devices of the Ministry of Education, Xi' an Jiaotong University, Xi’an 710049 (China); Tian, Jinshou [Xi' an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi' an 710119 (China); Wu, Shengli, E-mail: slwu@mail.xjtu.edu.cn [Key Laboratory for Physical Electronics and Devices of the Ministry of Education, Xi' an Jiaotong University, Xi’an 710049 (China); He, Jiai [School of Computer and Communication, Lanzhou University of Technology, Lanzhou, Gansu 730050 (China); Liu, Zhen [Key Laboratory for Physical Electronics and Devices of the Ministry of Education, Xi' an Jiaotong University, Xi’an 710049 (China)

    2016-10-01

    The transient response is of great influence on the electromagnetic compatibility of synchronous scanning streak cameras (SSSCs). In this paper we propose a numerical method to evaluate the transient response of the scanning deflection plate (SDP). First, we created a simplified circuit model for the SDP used in an SSSC, and then derived the Baum–Liu–Tesche (BLT) equation in the frequency domain. From the frequency-domain BLT equation, its transient counterpart was derived. These parameters, together with the transient-BLT equation, were used to compute the transient load voltage and load current, and then a novel numerical method to fulfill the continuity equation was used. Several numerical simulations were conducted to verify this proposed method. The computed results were then compared with transient responses obtained by a frequency-domain/fast Fourier transform (FFT) method, and the accordance was excellent for highly conducting cables. The benefit of deriving the BLT equation in the time domain is that it may be used with slight modifications to calculate the transient response and the error can be controlled by a computer program. The result showed that the transient voltage was up to 1000 V and the transient current was approximately 10 A, so some protective measures should be taken to improve the electromagnetic compatibility.

  8. A numerical algorithm to evaluate the transient response for a synchronous scanning streak camera using a time-domain Baum-Liu-Tesche equation

    Science.gov (United States)

    Pei, Chengquan; Tian, Jinshou; Wu, Shengli; He, Jiai; Liu, Zhen

    2016-10-01

    The transient response is of great influence on the electromagnetic compatibility of synchronous scanning streak cameras (SSSCs). In this paper we propose a numerical method to evaluate the transient response of the scanning deflection plate (SDP). First, we created a simplified circuit model for the SDP used in an SSSC, and then derived the Baum-Liu-Tesche (BLT) equation in the frequency domain. From the frequency-domain BLT equation, its transient counterpart was derived. These parameters, together with the transient-BLT equation, were used to compute the transient load voltage and load current, and then a novel numerical method to fulfill the continuity equation was used. Several numerical simulations were conducted to verify this proposed method. The computed results were then compared with transient responses obtained by a frequency-domain/fast Fourier transform (FFT) method, and the accordance was excellent for highly conducting cables. The benefit of deriving the BLT equation in the time domain is that it may be used with slight modifications to calculate the transient response and the error can be controlled by a computer program. The result showed that the transient voltage was up to 1000 V and the transient current was approximately 10 A, so some protective measures should be taken to improve the electromagnetic compatibility.

  9. Transient pool boiling heat transfer due to increasing heat inputs in subcooled water at high pressures

    Energy Technology Data Exchange (ETDEWEB)

    Fukuda, K. [Kobe Univ. of Mercantile Marine (Japan); Shiotsu, M.; Sakurai, A. [Kyoto Univ. (Japan)

    1995-09-01

    Understanding of transient boiling phenomenon caused by increasing heat inputs in subcooled water at high pressures is necessary to predict correctly a severe accident due to a power burst in a water-cooled nuclear reactor. Transient maximum heat fluxes, q{sub max}, on a 1.2 mm diameter horizontal cylinder in a pool of saturated and subcooled water for exponential heat inputs, q{sub o}e{sup t/T}, with periods, {tau}, ranging from about 2 ms to 20 s at pressures from atmospheric up to 2063 kPa for water subcoolings from 0 to about 80 K were measured to obtain the extended data base to investigate the effect of high subcoolings on steady-state and transient maximum heat fluxes, q{sub max}. Two main mechanisms of q{sub max} exist depending on the exponential periods at low subcoolings. One is due to the time lag of the hydrodynamic instability which starts at steady-state maximum heat flux on fully developed nucleate boiling (FDNB), and the other is due to the heterogenous spontaneous nucleations (HSN) in flooded cavities which coexist with vapor bubbles growing up from active cavities. The shortest period corresponding to the maximum q{sub max} for long period range belonging to the former mechanism becomes longer and the q{sub max}mechanism for long period range shifts to that due the HSN on FDNB with the increase of subcooling and pressure. The longest period corresponding to the minimum q{sub max} for the short period range belonging to the latter mechanism becomes shorter with the increase in saturated pressure. On the contrary, the longest period becomes longer with the increase in subcooling at high pressures. Correlations for steady-state and transient maximum heat fluxes were presented for a wide range of pressure and subcooling.

  10. High pressure air spray assistant power supply control strategies and their effects on diesel engine under transient operations

    Institute of Scientific and Technical Information of China (English)

    HAN Yongqiang; LIU Zhongchang; WANG Zhongshu; ZHU Ruoqun

    2007-01-01

    In order to reduce smoke from direct-injection (DI) turbo-charged and after-cooled (TCA) diesel engines under transient operations,the real-time controlling and measuring system of a high pressure air spray assistant power supply (HPAS) was developed.Effects of HPAS on a DI TCA diesel engine under constant engine speed and increased torque (CSIT) transient operations were studied by using different control strategies.Pre-spray (PS) strategy,which means supplying highly pressurized air into the exhaust manifold two seconds before the accelerating-graph begins to rise and stopping spraying air when the acceleratinggraph stops rising.Two other strategies-full-time-spray(FTS) and middle-time-spray (MTS)-were used to fully exploit HPAS potential.With the FTS and MTS strategies,the HPAS system can remarkably decrease smoke from DI TCA diesel engines under transient operations.

  11. Transient nearfield acoustic holography based on an interpolated time-domain equivalent source method.

    Science.gov (United States)

    Zhang, Xiao-Zheng; Bi, Chuan-Xing; Zhang, Yong-Bin; Xu, Liang

    2011-09-01

    Transient nearfield acoustic holography based on an interpolated time-domain equivalent source method (ESM) is proposed to reconstruct transient acoustic fields directly in the time domain. Since the equivalent source strengths solved by the traditional time-domain ESM formulation cannot be used to reconstruct the pressure on the source surface directly, an interpolation function is introduced to develop an interpolated time-domain ESM formulation which permits one to deduce an iterative reconstruction process. As the reconstruction process is ill-conditioned and especially there exists a cumulative effect of errors, the Tikhonov regularization is used to stabilize the process. Numerical examples of reconstructing transient acoustic fields from a baffled planar piston, an impulsively accelerating sphere and a cube box, respectively, demonstrate that the proposed method not only can effectively reconstruct transient acoustic fields in the time domain, but also can visualize acoustic fields in the space domain. And, in the first numerical example, the cumulative effect of errors and the validity of using the Tikhonov regularization to suppress the errors are described.

  12. Time Domain Simulation of Transient Responses of Very Large Floating Structures Under Unsteady External Loads

    Institute of Scientific and Technical Information of China (English)

    QIU Liu-chao; LIU Hua

    2005-01-01

    A time domain finite element method (FEM) for the analysis of transient elastic response of a very large floating structure (VLFS) subjected to arbitrary time-dependent external loads is presented. This method is developed directly in time domain and the hydrodynamic problem is formulated based on linear, inviscid and slightly compressible fluid theory and the structural response is analyzed on the thin plate assumption. The time domain finite element procedure herein is validated by comparing numerical results with available experimental data. Finally, the transient elastic response of a pontoon-type VLFS under the landing of an airplane is computed by the proposed time domain FEM. The time histories of the applied force and the position and velocity of an airplane during landing are modeled with data from a Boeing 747-400 jumbo jet.

  13. Adaptive Time Stepping for Transient Network Flow Simulation in Rocket Propulsion Systems

    Science.gov (United States)

    Majumdar, Alok K.; Ravindran, S. S.

    2017-01-01

    Fluid and thermal transients found in rocket propulsion systems such as propellant feedline system is a complex process involving fast phases followed by slow phases. Therefore their time accurate computation requires use of short time step initially followed by the use of much larger time step. Yet there are instances that involve fast-slow-fast phases. In this paper, we present a feedback control based adaptive time stepping algorithm, and discuss its use in network flow simulation of fluid and thermal transients. The time step is automatically controlled during the simulation by monitoring changes in certain key variables and by feedback. In order to demonstrate the viability of time adaptivity for engineering problems, we applied it to simulate water hammer and cryogenic chill down in pipelines. Our comparison and validation demonstrate the accuracy and efficiency of this adaptive strategy.

  14. A Precision and High-Speed Behavioral Simulation Method for Transient Response and Frequency Characteristics of Switching Converters

    Science.gov (United States)

    Sai, Toru; Sugimoto, Shoko; Sugimoto, Yasuhiro

    We propose a fast and precise transient response and frequency characteristics simulation method for switching converters. This method uses a behavioral simulation tool without using a SPICE-like analog simulator. The nonlinear operation of the circuit is considered, and the nonlinear function is realized by defining the nonlinear formula based on the circuit operation and by applying feedback. To assess the accuracy and simulation time of the proposed simulation method, we designed current-mode buck and boost converters and fabricated them using a 0.18-µm high-voltage CMOS process. The comparison in the transient response and frequency characteristics among SPICE, the proposed program on a behavioral simulation tool which we named NSTVR (New Simulation Tool for Voltage Regulators) and experiments of fabricated IC chips showed good agreement, while NSTVR was more than 22 times faster in transient response and 85 times faster in frequency characteristics than SPICE in CPU time in a boost converter simulation.

  15. Calibration of transient groundwater models using time series analysis and moment matching

    NARCIS (Netherlands)

    Bakker, M.; Maas, K.; Von Asmuth, J.R.

    2008-01-01

    A comprehensive and efficient approach is presented for the calibration of transient groundwater models. The approach starts with the time series analysis of the measured heads in observation wells using all active stresses as input series, which may include rainfall, evaporation, surface water leve

  16. Charting the Transient Radio Sky on Sub-Second Time-Scales with LOFAR

    NARCIS (Netherlands)

    Hessels, J.W.T.

    2012-01-01

    The LOw Frequency ARray (LOFAR) is a radio interferometric telescope that promises to open a largely unexplored window on transient sources in the "radio sky", from time-scales of nanoseconds to years. An important aspect of this will be the study of radio-emitting neutron stars in their various inc

  17. TIME-DOMAIN VOLUME INTEGRAL EQUATION FOR TRANSIENT SCATTERING FROM INHOMOGENEOUS OBJECTS-2D TM CASE

    Institute of Scientific and Technical Information of China (English)

    Wang Jianguo; Fan Ruyu

    2001-01-01

    This letter proposes a time-domain volume integral equation based method for analyzing the transient scattering from a 2D inhomogeneous cylinder by involking the volume equivalence principle for the transverse magnetic case. This integral equation is solved by using an MOT scheme. Numerical results obtained using this method agree very well with those obtained using the FDTD method.

  18. TIME-DOMAIN VOLUME INTEGRAL EQUATION FOR TRANSIENT SCATTERING FROM INHOMOGENEOUS OBJECTS-2D TE CASE

    Institute of Scientific and Technical Information of China (English)

    Wang Jianguo; Fan Ruyu

    2001-01-01

    This letter proposes a time-domain volume integral equation based method for analyzing the transient scattering from a 2D inhomogeneous cylinder by involking the volume equivalence principle for the transverse electric case. This integral equation is solved by using an MOT scheme. Numerical results obtained using this method agree very well with those obtained using the FDTD method.

  19. Real-time simulation of thermal stresses and creep in plates subjected to transient heat input

    DEFF Research Database (Denmark)

    Hattel, Jesper Henri; Jacobsen, Torben Krogsdal; Hansen, P.N.

    1997-01-01

    This paper presents a novel numerical technique for solving the temperature and stress fields in a plate subjected to arbitrarily varying transient boundary conditions (transient temperature and heat-flux variations) on a surface. The numerical method is based on the control-volume finite......-difference approach. It applies a general formulation which takes into account nonconstant material properties (e.g. temperature, material, or time dependency), heat-transfer coefficients, and creep. The temperature calculation applies a one-dimensional numerical model, whereas the stress analysis is semi...

  20. Deciding between compensated volume balance and real time transient models for pipeline leak detection system

    Energy Technology Data Exchange (ETDEWEB)

    Baptista, Renan Martins [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas. Div. de Explotacao]. E-mail: renan@cenpes.petrobras.com.br

    2000-07-01

    This paper describes a technical procedure to assess a software based leak detection system (LDS), by deciding between a simpler low cost, less effective product, having a fast installation and tuning, and a complex one with high cost and efficiency, which however takes a long time to be properly installed. This is a common decision among the pipeline operating companies, considering that the majority of the lines are short, with single phase liquid flow (which may include batches), basic communication system and instrumentation. Service companies offer realistic solutions for liquid flow, but usually designed to big pipeline networks, flowing multiple batches and allowing multiple fluid entrances and deliveries. Those solutions are sometimes impractical to short pipelines, due to its high cost, as well as long tuning procedures, complex instrumentation, communication and computer requirements. It is intended to approach here the best solution according to its cost. In a practical sense, it means to differentiate the various LDS techniques. Those techniques are available in a considerable number, and they are still spreading, according to the different scenarios. However, two most known and worldwide implemented techniques hold the majority of the market: the Compensated Volume Balance (CVB), which is less accurate, reliable and robust, but cheaper, simpler and faster to install, and the Real Time Transient Model (RTTM), which is very reliable, accurate and robust, but expensive and complex. This work will describe a way to define whether one can use or not a CVB in a pipeline. (author)

  1. Follow-Up Discovery Channel Telescope Observations of Transients and Variables from Optical Time Domain Surveys

    Science.gov (United States)

    Gezari, Suvi; Liu, Tingting; Hung, Tiara

    2017-01-01

    We highlight the capabilities of the Discovery Channel Telescope (DCT) for follow-up observations of transients and variables discovered by optical time-domain surveys. We present two DCT programs: 1) extended-baseline imaging with the Large Monolithic Imager of periodically variable quasars from the Pan-STARRS1 survey to identify binary supermassive black hole candidates, and 2) spectroscopic classification with the DeVeny spectrograph of nuclear transients from the iPTF survey to identify tidal disruption event candidates. We demonstrate that DCT is well-matched to the magnitude ranges of the transients and variables discovered by these surveys, and has played an important role in their classification and characterization.

  2. Coherent perfect absorbers for transient, periodic or chaotic optical fields: time-reversed lasers beyond threshold

    CERN Document Server

    Longhi, S

    2012-01-01

    Recent works [Y.D. Chong {\\it et al.}, Phys. Rev. Lett. {\\bf 105}, 053901 (2010); W. Wan {\\it et al.}, Science {\\bf 331}, 889 (2011)] have shown that the time-reversed process of lasing at threshold realizes a coherent perfect absorber (CPA). In a CPA, a lossy medium in an optical cavity with a specific degree of dissipation, equal in modulus to the gain of the lasing medium, can perfectly absorb coherent optical waves at discrete frequencies that are the time-reversed counterpart of the lasing modes. Here the concepts of time-reversal of lasing and CPA are extended for optical radiation emitted by a laser operated in an arbitrary (and generally highly-nonlinear) regime, i.e. for transient, chaotic or periodic coherent optical fields. We prove that any electromagnetic signal $E(t)$ generated by a laser system \\textbf{S} operated in an arbitrary regime can be perfectly absorbed by a CPA device $\\bf{S'}$ which is simply realized by placing inside \\textbf{S} a broadband linear absorber (attenuator) of appropriat...

  3. Time-variant power spectrum analysis for the detection of transient episodes in HRV signal.

    Science.gov (United States)

    Bianchi, A M; Mainardi, L; Petrucci, E; Signorini, M G; Mainardi, M; Cerutti, S

    1993-02-01

    A time-variant algorithm of autoregressive (AR) identification is introduced and applied to the heart rate variability (HRV) signal. The power spectrum is calculated from the AR coefficients derived from each single RR interval considered. Time-variant AR coefficients are determined through adaptive parametric identification with a forgetting factor which obtains weighed values on a running temporal window of 50 preceding measurements. Power spectrum density (PSD) is hence obtained at each cardiac cycle, making it possible to follow the dynamics of the spectral parameters on a beat-by-beat basis. These parameters are mainly the LF (low frequency) and the HF (high frequency) powers, and their ratio LF/HF. These together account for the balanced sympatho-vagal control mechanism affecting the heart rate. This method is applied to subjects suffering from transient ischemic attacks. The time variant spectral parameters suggest an early activation of LF component in the HRV power spectrum. It precedes by approximately 1.5-2 min the tachycardia and the ST displacement, generally indicative of the onset of an ischemic episode. The results suggest an arousal of sympathetic system before the acute attack.

  4. High-resolution spectroscopy of gamma-ray transients

    Energy Technology Data Exchange (ETDEWEB)

    Cline, T.L.

    1988-09-25

    The first high-resolution spectrometer flown to observe gamma-ray bursts was launched on the ISEE-3 spacecraft over nine years ago. It recorded two events before instrument failure, giving results that were suggestive but marginal. Other studies, with coarser energy resolution, also show evidence for spectral features as well as for spectral evolution on short time scales. Absolute source strength calibration will be possible only with source identification, but understanding of the burst emission processes will surely come only from the measurements having the best spectral and temporal precision. The only high- resolution gamma-ray spectrometer now planned, here or abroad, for space flight is an instrument sequel to the ISEE-3 spectrometer, to be flown on the interplanetary 'GGS Wind' mission. Much larger and higher-sensitivity, high-resolution instruments may have their optimum opportunities in conjunction with studies of solar flares in the time frame of the solar maximum of 2002.

  5. High Time Resolution Astrophysics

    CERN Document Server

    Phelan, Don; Shearer, Andrew

    2008-01-01

    High Time Resolution Astrophysics (HTRA) is an important new window to the universe and a vital tool in understanding a range of phenomena from diverse objects and radiative processes. This importance is demonstrated in this volume with the description of a number of topics in astrophysics, including quantum optics, cataclysmic variables, pulsars, X-ray binaries and stellar pulsations to name a few. Underlining this science foundation, technological developments in both instrumentation and detectors are described. These instruments and detectors combined cover a wide range of timescales and can measure fluxes, spectra and polarisation. These advances make it possible for HTRA to make a big contribution to our understanding of the Universe in the next decade.

  6. Impact of Model Detail of Synchronous Machines on Real-time Transient Stability Assessment

    DEFF Research Database (Denmark)

    Weckesser, Johannes Tilman Gabriel; Jóhannsson, Hjörtur; Østergaard, Jacob

    2013-01-01

    to identify the transient stability mechanism, a simulation with a high-order model was used as reference. The Western System Coordinating Council System (WSCC) and the New England & New York system are considered and simulations of an unstable and a stable scenario are carried out, where the detail......In this paper, it is investigated how detailed the model of a synchronous machine needs to be in order to assess transient stability using a Single Machine Equivalent (SIME). The results will show how the stability mechanism and the stability assessment are affected by the model detail. In order...... of the machine models is varied. Analyses of the results suggest that a 4th-order model may be sufficient to represent synchronous machines in transient stability studies....

  7. Determination of Defect Densities in High Electron Mobility Transistors Using Current Transient DLTS

    Science.gov (United States)

    Palma, John; Mil'shtein, Samson

    2011-12-01

    Since its introduction, Deep Level Transient Spectroscopy (DLTS) has become the preferred tool for investigating semiconductor defects. The limitations of measuring the small changes in gate capacitance in transistors led to the advent of current transient DLTS where the defects manifest themselves as a small change in drain current. However, this method was introduced at a time when heterostructure devices, such as High Electron Mobility Transistors (HEMTs), were non-existent and fails in determining defect concentrations in these modern devices. This study establishes a method by which defect concentrations can be determined in HEMT structures using current transient DLTS. First, the relationship between the change in the trap charge and the transistor drain current is established. Then, a computer aided technique is described which determines the volume within the device where the Fermi level crosses the trap energy. The result is that trap densities and their locations can be determined. DLTS measurements revealed two traps with ET = 0.43 and Nt = 1.1×1017cm-3, and ET = 0.19 and Nt = 3.1×1017 cm-3 for a tested HEMT.

  8. Real-time calibration of the AARTFAAC array for transient detection

    Science.gov (United States)

    Prasad, P.; Wijnholds, S. J.; Huizinga, F.; Wijers, R. A. M. J.

    2014-08-01

    The search for transient phenomena at low radio frequencies is now coming of age with the development of radio sky monitors with a large field of view, which are made feasible by new developments in calibration algorithms and computing. However, accurate calibration of such arrays is challenging, especially within the latency requirements of near real-time transient monitors, and is the main cause of limiting their sensitivities. This paper describes a strategy for real-time, wide-field direction-dependent calibration of the Amsterdam-ASTRON Radio Transients Facility and Analysis Center (AARTFAAC) array, which is a sensitive, continuously available all-sky monitor based on the LOw Frequency ARray (LOFAR). The monitor operates in a zenith pointing, snapshot imaging mode for image plane detection of bright radio transients. We show that a tracking calibration approach with solution propagation satisfies our latency, computing, and calibration accuracy constraints. We characterize the instrument and verify the calibration strategy under a variety of observing conditions. This brings out several phenomena, which can bias the calibration. The real-time nature of the application further imposes strict latency and computational constraints. We find that although ionosphere-induced phase errors present a major impediment to accurate calibration, these can be corrected in the direction of the brightest few sources to significantly improve image quality. Our real-time calibration pipeline implementation processes a single spectral channel of a snapshot observation in ~0.2 s on test hardware, which is well within its latency budget. Autonomously calibrating and imaging one second snapshots, our approach leads to a typical image noise of ~10 Jy for a ~90 kHz channel, reaching dynamic ranges of ~2000:1. We also show that difference imaging allows thermal-noise limited transient detection, despite the instrument being confusion-noise limited.

  9. Time-depth conversion of transient electromagnetic method used in coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Jing-cun Yu; Yang-zhou Wang; Jian Liu; Xiao-bo Zeng [China University of Mining and Technology, Xuzhou (China). School of Resources and Earth Science

    2008-12-15

    Accuracy of time-depth conversion in data processing of transient electromagnetic prospecting always affects the accurate positioning of water bodies in coal mines. In order to improve the accuracy of time-depth conversion, a mathematical model was established of time-depth conversion for a transient electromagnetic method based on the theory of 'double smoke ring effect' of full space transient electromagnetic field transmission. Using a 3-layer as well as a 4-layer geo-electric model for roadway floors, the time-depth conversion of theoretical curves of apparent resistance varying over time was performed. In these curves, the depth corresponding to extreme value points is nearly the same as the depth of a geo-electric model. The position of water body determined by the time-depth conversion method agrees well with the result of borehole drilling, indicating that the established time-depth conversion model can clearly improve the accuracy of spatial positioning of water bodies in coal mines. 14 refs., 3 figs.

  10. Time-depth conversion of transient electromagnetic method used in coal mines

    Institute of Scientific and Technical Information of China (English)

    YU Jing-cun; WANG Yang-zhou; LIU Jian; ZENG Xiao-bo

    2008-01-01

    Accuracy of time-depth conversion in data processing of transient electromagnetic prospecting always affects the accurate positioning of water bodies in coal mines. In order to improve the accuracy of time-depth conversion, we established a mathematical model of time-depth conversion for a transient electromagnetic method based on the theory of "double smoke ring effect"of full space transient electromagnetic field transmission. Using a 3-layer as well as a 4-layer geo-electric model for roadway floors,we performed the time-depth conversion of theoretical curves of apparent resistance varying over time. In these curves, the depth corresponding to extreme value points is nearly the same as the depth of a geo-electric model. The position of water body determined by our time-depth conversion method agrees well with the result of borehole drilling, indicating that the established time-depth conversion model can clearly improve the accuracy of spatial positioning of water bodies in coal mines.

  11. Production of high transient heat and particle fluxes in a linear plasma device

    NARCIS (Netherlands)

    De Temmerman, G.; Zielinski, J. J.; van der Meiden, H.; Melissen, W.; Rapp, J.

    2010-01-01

    We report on the generation of high transient heat and particle fluxes in a linear plasma device by pulsed operation of the plasma source. A capacitor bank is discharged into the source to transiently increase the discharge current up to 1.7 kA, allowing peak densities and temperature of 70x10(20) m

  12. A variational principle for the description of time-dependent modes associated with transient instabilities

    CERN Document Server

    Babaee, Hessam

    2015-01-01

    We introduce a variational formulation for the determination of a finite-dimensional, time-dependent, orthonormal basis that captures directions of the phase space associated with transient instabilities. While these instabilities have finite lifetime they can play a crucial role by either altering the system dynamics through the activation of other instabilities, or by creating sudden nonlinear energy transfers that lead to extreme responses. However, their essentially transient character makes their description a particularly challenging task. We develop a variational framework that focuses on the optimal approximation of the system dynamics over finite-time intervals. This variational formulation results in differential equations that evolve a time-dependent basis so that it optimally approximates the most unstable directions over finite times. We demonstrate the capability of the method for two families of problems: i) linear systems including the advection-diffusion operator in a strongly non-normal regi...

  13. Timing Solution and Single-pulse Properties for Eight Rotating Radio Transients

    Science.gov (United States)

    Cui, B.-Y.; Boyles, J.; McLaughlin, M. A.; Palliyaguru, N.

    2017-05-01

    Rotating radio transients (RRATs), loosely defined as objects that are discovered through only their single pulses, are sporadic pulsars that have a wide range of emission properties. For many of them, we must measure their periods and determine timing solutions relying on the timing of their individual pulses, while some of the less sporadic RRATs can be timed by using folding techniques as we do for other pulsars. Here, based on Parkes and Green Bank Telescope (GBT) observations, we introduce our results on eight RRATs including their timing-derived rotation parameters, positions, and dispersion measures (DMs), along with a comparison of the spin-down properties of RRATs and normal pulsars. Using data for 24 RRATs, we find that their period derivatives are generally larger than those of normal pulsars, independent of any intrinsic correlation with period, indicating that RRATs’ highly sporadic emission may be associated with intrinsically larger magnetic fields. We carry out Lomb-Scargle tests to search for periodicities in RRATs’ pulse detection times with long timescales. Periodicities are detected for all targets, with significant candidates of roughly 3.4 hr for PSR J1623-0841 and 0.7 hr for PSR J1839-0141. We also analyze their single-pulse amplitude distributions, finding that log-normal distributions provide the best fits, as is the case for most pulsars. However, several RRATs exhibit power-law tails, as seen for pulsars emitting giant pulses. This, along with consideration of the selection effects against the detection of weak pulses, imply that RRAT pulses generally represent the tail of a normal intensity distribution.

  14. Transient energy excitation in shortcuts to adiabaticity for the time dependent harmonic oscillator

    CERN Document Server

    Chen, Xi

    2010-01-01

    There is recently a surge of interest to cut down the time it takes to change the state of a quantum system adiabatically. We study for the time-dependent harmonic oscillator the transient energy excitation in speed-up processes designed to reproduce the initial populations at some predetermined final frequency and time, providing lower bounds and examples. Implications for the limits imposed to the process times and for the principle of unattainability of the absolute zero, in a single expansion or in quantum refrigerator cycles, are drawn.

  15. Neural mechanisms of time-based prospective memory: evidence for transient monitoring.

    Directory of Open Access Journals (Sweden)

    Kevin M Oksanen

    Full Text Available In daily life, we often need to remember to perform an action after, or at, a specific period of time (e.g., take pizza out of oven in 15 minutes. Surprisingly, little is known about the neural mechanisms that support this form of memory, termed time-based prospective memory (PM. Here we pioneer an fMRI paradigm that enables examination of both sustained and transient processes engaged during time-based PM. Participants were scanned while performing a demanding on-going task (n-back working memory, with and without an additional time-based PM demand. During the PM condition participants could access a hidden clock with a specific button-press response, while in the control condition, pseudo-clocks randomly appeared and were removed via the same response. Analyses tested for sustained activation associated with the PM condition, and also transient activation associated with clock-checks and the PM target response. Contrary to prior findings with event-based PM (i.e., remembering to perform a future action when a specific event occurs, no sustained PM-related activity was observed in anterior prefrontal cortex (aPFC or elsewhere in the brain; instead, transient clock-related activity was observed in this region. Critically, the activation was anticipatory, increasing before clock-check responses. Anticipatory activity prior to the PM target response was weaker in aPFC, but strong in pre-Supplementary Motor Area (pre-SMA; relative to clock-check responses, suggesting a functional double dissociation related to volitional decision-making. Together, the results suggest that aPFC-activity dynamics during time-based PM reflect a distinct transient monitoring process, enabling integration of the PM intention with current temporal information to facilitate scheduling of upcoming PM-related actions.

  16. Multi-Gigahertz True-Time-Delay with Optical Coherent Transients

    Science.gov (United States)

    Tian, Mingzhen; Reibel, Randy; Babbitt, Wm. Randall

    2001-03-01

    Operation of mutli-element phased array antenna systems with broadband (multi-gigahertz) signals without beam squint requires novel true time-delay devices. Optical coherent transient technology could provide thousands of delays in a compact volume by exploiting the space and frequency dimensions of inhomogeneously broadened absorbers. We have demonstrated broadband true-time-delay using optical coherent transient techniques in a Tm3+:YAG crystal at 4K, which offers delays up to a microsecond on signals having several tens of GHz bandwidth with sub-picosecond delay resolution. The desired delay was programmed in the crystal as a spatial-spectral grating by repeated application of two 30 picosecond pulses. The demonstrated bandwidth was over 3 GHz and the retrieved data showed good fidelity. Delay accuracy of 1 picosecond and delay resolution of 7 picoseconds (measurement limit) were achieved. The bandwidth achieved is 1000 times greater than previous demonstrations of optical coherent transient true-time-delay. We thank the Office of Naval Research and the University of Colorado for supporting this work.

  17. Level crossings, excess times and transient plasma-wall interactions in fusion plasmas

    CERN Document Server

    Theodorsen, Audun

    2016-01-01

    Based on a stochastic model for intermittent fluctuations in the boundary region of magnetically confined plasmas, an expression for the level crossing rate is derived from the joint distribution of the process and its derivative. From this the average time spent by the process above a certain threshold level is obtained. This provides novel predictions of plasma-wall interactions due to transient transport events associated with radial motion of blob-like structures in the scrape-off layer.

  18. Isolated Ti in Si: Deep level transient spectroscopy, minority carrier transient spectroscopy, and high-resolution Laplace deep level transient spectroscopy studies

    Science.gov (United States)

    Scheffler, L.; Kolkovsky, Vl.; Weber, J.

    2015-01-01

    Combining deep level transient spectroscopy (DLTS), high-resolution Laplace DLTS, and minority carrier transient spectroscopy studies, we question the identification of the dominant Ti-related defects introducing deep levels (E40, E150, and H180) in n- and p-type Si. The observed results cannot unambiguously support the models previously reported for these defects. The presence of the Poole-Frenkel effect describing the enhancement of the emission rates of E40 as a function of electric field is not consistent with the previous assignment of this defect to the single acceptor, whereas the absence of the enhancement of the emission rate of E150 under different reverse bias applied to the diode does not confirm the previous attribution of this defect to the single donor in n-type Si. The attribution of H180 to the double donor is in good agreement with our results. In contrast, the identical depth profiles obtained for E40 and E150 in bulk of as-grown, hydrogenated and annealed samples cannot be explained by the assignment of these levels to different defects.

  19. HIGH DYNAMIC RANGE OBSERVATIONS OF SOLAR CORONAL TRANSIENTS AT LOW RADIO FREQUENCIES WITH A SPECTRO-CORRELATOR

    Energy Technology Data Exchange (ETDEWEB)

    Hariharan, K.; Ramesh, R.; Kathiravan, C.; Rajalingam, M. [Indian Institute of Astrophysics, Bangalore-560034 (India); Abhilash, H. N., E-mail: khariharan@iiap.res.in [Poornaprajna College, Udupi-576101 (India)

    2016-02-15

    A new antenna system with a digital spectro-correlator that provides high temporal, spectral, and amplitude resolutions has been commissioned at the Gauribidanur Observatory near Bangalore in India. Presently, it is used for observations of the solar coronal transients in the scarcely explored frequency range ≈30–15 MHz. The details of the antenna system, the associated receiver setup, and the initial observational results are reported. Some of the observed transients exhibited quasi-periodicity in their time profiles at discrete frequencies. Estimates of the associated magnetic field strength (B) indicate that B ≈ 0.06–1 G at a typical frequency such as 19.5 MHz.

  20. Transient Taylor-Aris dispersion for time-dependent flows in straight channels

    DEFF Research Database (Denmark)

    Vedel, Søren; Bruus, Henrik

    2012-01-01

    –ket formalism, we derive an expression for the effective solute diffusivity valid for transient Taylor–Aris dispersion in any given time-dependent, multi-frequency solvent flow through straight channels. Our theory shows that the solute dispersion may be greatly enhanced by the time-dependent parts of the flow...... recover the known results for steady and single-frequency pulsating flows, and find new, richer structure of the dispersion as function of system parameters in multi-frequency systems. We show that the effective diffusivity is enhanced significantly by those parts of the time-dependent velocity field...

  1. A rapid, highly efficient and economical method of Agrobacterium-mediated in planta transient transformation in living onion epidermis.

    Directory of Open Access Journals (Sweden)

    Kedong Xu

    Full Text Available Transient transformation is simpler, more efficient and economical in analyzing protein subcellular localization than stable transformation. Fluorescent fusion proteins were often used in transient transformation to follow the in vivo behavior of proteins. Onion epidermis, which has large, living and transparent cells in a monolayer, is suitable to visualize fluorescent fusion proteins. The often used transient transformation methods included particle bombardment, protoplast transfection and Agrobacterium-mediated transformation. Particle bombardment in onion epidermis was successfully established, however, it was expensive, biolistic equipment dependent and with low transformation efficiency. We developed a highly efficient in planta transient transformation method in onion epidermis by using a special agroinfiltration method, which could be fulfilled within 5 days from the pretreatment of onion bulb to the best time-point for analyzing gene expression. The transformation conditions were optimized to achieve 43.87% transformation efficiency in living onion epidermis. The developed method has advantages in cost, time-consuming, equipment dependency and transformation efficiency in contrast with those methods of particle bombardment in onion epidermal cells, protoplast transfection and Agrobacterium-mediated transient transformation in leaf epidermal cells of other plants. It will facilitate the analysis of protein subcellular localization on a large scale.

  2. Time-Dependent Flow Properties of Transient Hydrogels with Temporal Network Junctions

    Science.gov (United States)

    Kaneda, Isamu; Koga, Tsuyoshi; Tanaka, Fumihiko

    The nonlinear rheological behavior under startup shear flows in aqueous solutions of telechelic hydrophobically ethoxylated urethane carrying branched alkyl end-chains, 2-decyl-tetradecyl, (referred to as C24-HEUR) was studied by strain-controlled rheomery. Unusual stress upturn (known as strain hardening), followed by the stress overshoot, was observed for 3 wt% aqueous solution above a critical shear rate. The phenomenon is explained by our recent transient network theory in terms of nonlinear chain stretching occurring during the stress build-up. Upon addition of glycerol, the relaxation time was shortened, while the equilibrium modulus increased with the concentration of glycerol. The stress upturn disappeared above a certain value of the glycerol concentration, strongly suggesting that glycerol affects the dynamics of the transient network through the interaction with the micellar junctions.

  3. ITER-W monoblocks under high pulse number transient heat loads at high temperature

    Energy Technology Data Exchange (ETDEWEB)

    Loewenhoff, Th., E-mail: T.Loewenhoff@fz-juelich.de [Forschungszentrum Jülich, 52428 Jülich (Germany); Linke, J., E-mail: J.Linke@fz-juelich.de [Forschungszentrum Jülich, 52428 Jülich (Germany); Pintsuk, G., E-mail: G.Pintsuk@fz-juelich.de [Forschungszentrum Jülich, 52428 Jülich (Germany); Pitts, R.A., E-mail: Richard.Pitts@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul-Lez-Durance (France); Riccardi, B., E-mail: Bruno.Riccardi@f4e.europa.eu [Fusion for Energy Joint Undertaking, Josep Pla No. 2 – T B3 7/01, Barcelona 08019 (Spain)

    2015-08-15

    In the context of using a full-tungsten (W) divertor for ITER, thermal shock resistance has become even more important as an issue that may potentially influence the long term performance. To address this issue a unique series of experiments has been performed on ITER-W monoblock mock ups in three EU high heat flux facilities: GLADIS (neutral beam), JUDITH 2 (electron beam) and Magnum-PSI (plasma beam). This paper discusses the JUDITH 2 experiments. Two different base temperatures, 1200 °C and 1500 °C, were chosen superimposed by ∼18,000/100,000 transient events (Δt = 0.48 ms) of 0.2 and 0.6 GW/m{sup 2}. Results showed a stronger surface deterioration at higher base temperature, quantified by an increase in roughening. This is intensified if the same test is done after preloading (exposure to high temperature without transients), especially at higher base temperature when the material recrystallizes.

  4. Real Time Quantification of Ultrafast Photoinduced Bimolecular Electron Transfer Rate: Direct Probing of the Transient Intermediate.

    Science.gov (United States)

    Mukherjee, Puspal; Biswas, Somnath; Sen, Pratik

    2015-08-27

    Fluorescence quenching studies through steady-state and time-resolved measurements are inadequate to quantify the bimolecular electron transfer rate in bulk homogeneous solution due to constraints from diffusion. To nullify the effect of diffusion, direct evaluation of the rate of formation of a transient intermediate produced upon the electron transfer is essential. Methyl viologen, a well-known electron acceptor, produces a radical cation after accepting an electron, which has a characteristic strong and broad absorption band centered at 600 nm. Hence it is a good choice to evaluate the rate of photoinduced electron transfer reaction employing femtosecond broadband transient absorption spectroscopy. The time constant of the aforementioned process between pyrene and methyl viologen in methanol has been estimated to be 2.5 ± 0.4 ps using the same technique. The time constant for the backward reaction was found to be 14 ± 1 ps. These values did not change with variation of concentration of quencher, i.e., methyl viologen. Hence, we can infer that diffusion has no contribution in the estimation of rate constants. However, on changing the solvent from methanol to ethanol, the time constant of the electron transfer reaction has been found to increase and has accounted for the change in solvent reorganization energy.

  5. New approach of a transient ICP-MS measurement method for samples with high salinity.

    Science.gov (United States)

    Hein, Christina; Sander, Jonas Michael; Kautenburger, Ralf

    2017-03-01

    In the near future it is necessary to establish a disposal for high level nuclear waste (HLW) in deep and stable geological formations. In Germany typical host rocks are salt or claystone. Suitable clay formations exist in the south and in the north of Germany. The geochemical conditions of these clay formations show a strong difference. In the northern ionic strengths of the pore water up to 5M are observed. The determination of parameters like Kd values during sorption experiments of metal ions like uranium or europium as homologues for trivalent actinides onto clay stones are very important for long term safety analysis. The measurement of the low concentrated, not sorbed analytes commonly takes place by inductively coupled plasma mass spectrometry (ICP-MS). A direct measurement of high saline samples like seawater with more than 1% total dissolved salt content is not possible. Alternatives like sample clean up, preconcentration or strong dilution have more disadvantages than advantages for example more preparation steps or additional and expensive components. With a small modification of the ICP-MS sample introduction system and a home-made reprogramming of the autosampler a transient analysing method was developed which is suitable for measuring metal ions like europium and uranium in high saline sample matrices up to 5M (NaCl). Comparisons at low ionic strength between the default and the transient measurement show the latter performs similarly well to the default measurement. Additionally no time consuming sample clean-up or expensive online dilution or matrix removal systems are necessary and the analysation shows a high sensitivity due to the data processing based on the peak area. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Sediment residence time and connectivity in non-equilibrium and transient geomorphic systems

    Science.gov (United States)

    Hoffmann, Thomas; Hillebrand, Gudrun

    2016-04-01

    Growing empirical evidence shows that sediment delivery in many geomorphic systems is in transient state or out of equilibrium with respect to the external driving forces. The transient state is often related to the (dis)connectivity of the many constituent parts of geomorphic systems as a result of sediment storage along the sediment flow path from its source to the final sink. The response time of geomorphic systems to external changes is thus dependent on the residence time of sediment in various storage compartments. Here, a mathematical concept based on reservoir theory to model residence time of sediment in various depositional environments is presented. The concept allows to reinterpret millennial scale sediment budges, but can be also applied to decal sediment storage in reservoirs and aids sediment management practices in river systems. The framework sheds light on the limitation of the sediment delivery ratio, which is often used as a measure of sediment connectivity in geomorphic systems, and provides analytical information on process type, pace of sediment flux and connectivity of storage compartments along the sediment cascade. Examples will be given using Postglacial sediment budgets from the Canadian Rocky mountains on the one hand and short-term (~15 yrs.) sediment dynamics in the Iffezheim barrage in the Upper Rhine (Germany).

  7. Time-varying singular value decomposition for periodic transient identification in bearing fault diagnosis

    Science.gov (United States)

    Zhang, Shangbin; Lu, Siliang; He, Qingbo; Kong, Fanrang

    2016-09-01

    For rotating machines, the defective faults of bearings generally are represented as periodic transient impulses in acquired signals. The extraction of transient features from signals has been a key issue for fault diagnosis. However, the background noise reduces identification performance of periodic faults in practice. This paper proposes a time-varying singular value decomposition (TSVD) method to enhance the identification of periodic faults. The proposed method is inspired by the sliding window method. By applying singular value decomposition (SVD) to the signal under a sliding window, we can obtain a time-varying singular value matrix (TSVM). Each column in the TSVM is occupied by the singular values of the corresponding sliding window, and each row represents the intrinsic structure of the raw signal, namely time-singular-value-sequence (TSVS). Theoretical and experimental analyses show that the frequency of TSVS is exactly twice that of the corresponding intrinsic structure. Moreover, the signal-to-noise ratio (SNR) of TSVS is improved significantly in comparison with the raw signal. The proposed method takes advantages of the TSVS in noise suppression and feature extraction to enhance fault frequency for diagnosis. The effectiveness of the TSVD is verified by means of simulation studies and applications to diagnosis of bearing faults. Results indicate that the proposed method is superior to traditional methods for bearing fault diagnosis.

  8. Small Near-Earth Asteroids in the Palomar Transient Factory Survey: A Real-Time Streak-detection System

    Science.gov (United States)

    Waszczak, Adam; Prince, Thomas A.; Laher, Russ; Masci, Frank; Bue, Brian; Rebbapragada, Umaa; Barlow, Tom; Surace, Jason; Helou, George; Kulkarni, Shrinivas

    2017-03-01

    Near-Earth asteroids (NEAs) in the 1–100 meter size range are estimated to be ∼1,000 times more numerous than the ∼15,000 currently cataloged NEAs, most of which are in the 0.5–10 kilometer size range. Impacts from 10–100 meter size NEAs are not statistically life-threatening, but may cause significant regional damage, while 1–10 meter size NEAs with low velocities relative to Earth are compelling targets for space missions. We describe the implementation and initial results of a real-time NEA-discovery system specialized for the detection of small, high angular rate (visually streaked) NEAs in Palomar Transient Factory (PTF) images. PTF is a 1.2-m aperture, 7.3 deg2 field of view (FOV) optical survey designed primarily for the discovery of extragalactic transients (e.g., supernovae) in 60-second exposures reaching ∼20.5 visual magnitude. Our real-time NEA discovery pipeline uses a machine-learned classifier to filter a large number of false-positive streak detections, permitting a human scanner to efficiently and remotely identify real asteroid streaks during the night. Upon recognition of a streaked NEA detection (typically within an hour of the discovery exposure), the scanner triggers follow-up with the same telescope and posts the observations to the Minor Planet Center for worldwide confirmation. We describe our 11 initial confirmed discoveries, all small NEAs that passed 0.3–15 lunar distances from Earth. Lastly, we derive useful scaling laws for comparing streaked-NEA-detection capabilities of different surveys as a function of their hardware and survey-pattern characteristics. This work most directly informs estimates of the streak-detection capabilities of the Zwicky Transient Facility (ZTF, planned to succeed PTF in 2017), which will apply PTF’s current resolution and sensitivity over a 47-deg2 FOV.

  9. Transient 5-oxoprolinuria: unusually high anion gap acidosis in an infant.

    Science.gov (United States)

    Hulley, Sarah L; Perring, Jeff; Manning, Nigel; Olpin, Simon; Yap, Sufin

    2015-12-01

    Transient 5-oxoprolinuria is a phenomenon that is well recognised in adults. We illustrate an unusual paediatric case of transient 5-oxoprolinuria presenting during an episode of severe sepsis with concomitant paracetamol use. The 15-month-old patient had an extremely high anion gap metabolic acidosis. Adequate resuscitation failed to correct the biochemical disturbance, and high levels of 5-oxoproline were identified. A combination of haemofiltration, replenishment of glutathione stores with N-acetylcysteine and cessation of paracetamol administration resulted in the resolution of the acidosis. Subsequent testing following treatment of the sepsis revealed no ongoing 5-oxoprolinuria. Transient 5-oxoprolinuria has been previously reported in the adult population during episodes of severe sepsis and various pharmaceutical interventions. This case illustrates that it is a phenomenon that should be considered in paediatric patients where a very high anion gap metabolic acidosis exists that cannot be explained by the biochemical indices. • 5-oxoprolinuria in the paediatric population is usually secondary to an inborn error of metabolism. • Transient 5-oxoprolinuria is well recognised in adults during episodes of severe glutathione depletion. • Transient 5-oxoprolinuria is a phenomenon rarely reported in the paediatric population. • It highlights the importance of investigating a high anion gap such that unusual diagnoses are not missed.

  10. Small near-Earth asteroids in the Palomar Transient Factory survey: A real-time streak-detection system

    CERN Document Server

    Waszczak, Adam; Laher, Russ; Masci, Frank; Bue, Brian; Rebbapragada, Umaa; Barlow, Tom; Surace, Jason; Helou, George; Kulkarni, Shrinivas

    2016-01-01

    Near-Earth asteroids (NEAs) in the 1-100 meter size range are estimated to be $\\sim$1,000 times more numerous than the $\\sim$15,000 currently-catalogued NEAs, most of which are in the 0.5-10 kilometer size range. Impacts from 10-100 meter size NEAs are not statistically life-threatening but may cause significant regional damage, while 1-10 meter size NEAs with low velocities relative to Earth are compelling targets for space missions. We describe the implementation and initial results of a real-time NEA-discovery system specialized for the detection of small, high angular rate (visually-streaked) NEAs in Palomar Transient Factory (PTF) images. PTF is a 1.2-m aperture, 7.3-deg$^2$ field-of-view optical survey designed primarily for the discovery of extragalactic transients (e.g., supernovae) in 60-second exposures reaching $\\sim$20.5 visual magnitude. Our real-time NEA discovery pipeline uses a machine-learned classifier to filter a large number of false-positive streak detections, permitting a human scanner t...

  11. Simulation of Transient Groundwater Age Distribution in Space and Time, Wairarapa Valley, New Zealand

    Science.gov (United States)

    Toews, M. W.; Daughney, C.; Morgenstern, U.; Petrus, K.; Evison, R.; Jackson, B. M.; Cornaton, F. J.

    2013-12-01

    The 3000 km2 Wairarapa Valley is an important agricultural region near Wellington, New Zealand. Improved management of land and water within the region requires understanding of the spatial and temporal variations of water age. This study combines the two main methods currently available for determination of water age: numerical groundwater models and hydrological tracers. A transient finite element groundwater flow and mass transport model was calibrated to match time series measurements of groundwater level and tritium concentration. The groundwater flow model incorporates spatio-temporal recharge, variable stream flow and levels, and variable pump rates. The time-marching Laplace transform Galerkin (TMLTG) technique was then used to evaluate the full spectrum of groundwater age (i.e. age distribution) at each model node and at each time step. To our knowledge this study is the first application of the TMLTG technique to a real-world example, made possible by the rich time-series dataset of tritium measurements that exists for the Wairarapa Valley. Results showed that travel time from the land surface through the aquifer system varies from a few years to several decades and is strongly dependent on location and time. Results also demonstrated important differences between the transient age distributions derived from the TMLTG technique compared to the much simpler steady-state lumped parameter models that are frequently applied to interpret age tracer data. Finally, results had direct application to land and water management, for example for identification of land areas where age distributions vary seasonally, affecting the security of groundwater supplies used for drinking water.

  12. Late time cooling of neutron star transients and the physics of the inner crust

    CERN Document Server

    Deibel, Alex; Brown, Edward F; Reddy, Sanjay

    2016-01-01

    An accretion outburst onto a neutron star transient heats the neutron star's crust out of thermal equilibrium with the core. After the outburst the crust thermally relaxes toward equilibrium with the neutron star core and the surface thermal emission powers the quiescent X-ray light curve. Crust cooling models predict that thermal equilibrium of the crust will be established $\\approx 1000 \\, \\mathrm{d}$ into quiescence. Recent observations of the cooling neutron star transient MXB 1659-29, however, suggest that the crust did not reach thermal equilibrium with the core on the predicted timescale and continued to cool after $\\approx 2500 \\, \\mathrm{d}$ into quiescence. Because the quiescent light curve reveals successively deeper layers of the crust, the observed late time cooling of MXB 1659-29 depends on the thermal transport in the inner crust. In particular, the observed late time cooling is consistent with a low thermal conductivity layer near the depth predicted for nuclear pasta that maintains a temperat...

  13. Modeling and Mitigation for High Frequency Switching Transients Due to Energization in Offshore Wind Farms

    Directory of Open Access Journals (Sweden)

    Yanli Xin

    2016-12-01

    Full Text Available This paper presents a comprehensive investigation on high frequency (HF switching transients due to energization of vacuum circuit breakers (VCBs in offshore wind farms (OWFs. This research not only concerns the modeling of main components in collector grids of an OWF for transient analysis (including VCBs, wind turbine transformers (WTTs, submarine cables, but also compares the effectiveness between several mainstream switching overvoltage (SOV protection methods and a new mitigation method called smart choke. In order to accurately reproduce such HF switching transients considering the current chopping, dielectric strength (DS recovery capability and HF quenching capability of VCBs, three models are developed, i.e., a user–defined VCB model, a HF transformer terminal model and a three-core (TC frequency dependent model of submarine cables, which are validated through simulations and compared with measurements. Based on the above models and a real OWF configuration, a simulation model is built and several typical switching transient cases are investigated to analyze the switching transient process and phenomena. Subsequently, according to the characteristics of overvoltages, appropriate parameters of SOV mitigation methods are determined to improve their effectiveness. Simulation results indicate that the user–defined VCB model can satisfactorily simulate prestrikes and the proposed component models display HF characteristics, which are consistent with onsite measurement behaviors. Moreover, the employed protection methods can suppress induced SOVs, which have a steep front, a high oscillation frequency and a high amplitude, among which the smart choke presents a preferable HF damping effect.

  14. Comparison of high pressure transient PVT measurements and model predictions. Part I.

    Energy Technology Data Exchange (ETDEWEB)

    Felver, Todd G.; Paradiso, Nicholas Joseph; Evans, Gregory Herbert; Rice, Steven F.; Winters, William Stanley, Jr.

    2010-07-01

    A series of experiments consisting of vessel-to-vessel transfers of pressurized gas using Transient PVT methodology have been conducted to provide a data set for optimizing heat transfer correlations in high pressure flow systems. In rapid expansions such as these, the heat transfer conditions are neither adiabatic nor isothermal. Compressible flow tools exist, such as NETFLOW that can accurately calculate the pressure and other dynamical mechanical properties of such a system as a function of time. However to properly evaluate the mass that has transferred as a function of time these computational tools rely on heat transfer correlations that must be confirmed experimentally. In this work new data sets using helium gas are used to evaluate the accuracy of these correlations for receiver vessel sizes ranging from 0.090 L to 13 L and initial supply pressures ranging from 2 MPa to 40 MPa. The comparisons show that the correlations developed in the 1980s from sparse data sets perform well for the supply vessels but are not accurate for the receivers, particularly at early time during the transfers. This report focuses on the experiments used to obtain high quality data sets that can be used to validate computational models. Part II of this report discusses how these data were used to gain insight into the physics of gas transfer and to improve vessel heat transfer correlations. Network flow modeling and CFD modeling is also discussed.

  15. Transient aggregation and long-time diffusion of bacterial suspensions in time periodic flows

    Science.gov (United States)

    Qin, Boyang; Winter, Rebecca; Gurjar, Madhura; Gagnon, David; Patteson, Alison; Arratia, Paulo

    2016-11-01

    In this talk, the transport dynamics of swimming bacteria in time-periodic flows is investigated in experiments and simulations. Experiments are performed by introducing swimming bacteria (Vibrio cholerae) in a low Reynolds number, two-dimensional flow driven electromagnetically. We observe two distinct transport regimes: (i) entrapment of bacteria inside vortex and near elliptic points and (ii) aggregation and subsequent transport along the flow manifolds. These time-dependent behaviors are set by the interaction between swimmer kinematics (e.g. speed, tumbling frequency, etc) and flow properties. Numerical simulation using a stochastic Langevin model are able to capture the main experimental results including the entrapment of bacteria near elliptic points and the rapid spreading along manifolds. Results show a significant reduction in long-time effective diffusion of the swimmer as vortex strength is increased. The conditions for bacterial entrapment in vortex flows are discussed.

  16. A high-velocity transient outflow in Eta Carinae

    CERN Document Server

    Behar, Ehud; Soker, Noam

    2007-01-01

    We analyze velocity profiles of the X-ray spectral lines emitted by the Eta Carinae stellar binary at four epochs, just before the X-ray minimum (associated with periastron) and more than two years before the minimum (~apastron). The profiles are nicely resolved by the HETGS spectrometer on board Chandra. Far from periastron, we find symmetrical lines that are more or less centered at zero velocity. Closer to periastron, the lines broaden, shift towards the blue, and become visibly asymmetric. While the quiescent X-ray emission and slight (<200 km/sec) centroid shifts can be ascribed to the ordinary continuous binary wind interaction and to the orbital velocity of the secondary star, the observed high-velocity emission up to ~2,000 km/sec and the abrupt flares during which it occurs can not. This leads us to interpret the high-velocity flaring emission as due to a fast collimated outflow of ionized gas.

  17. A High Temperature Experimental Characterization Procedure for Oxide-Based Thermoelectric Generator Modules under Transient Conditions

    Directory of Open Access Journals (Sweden)

    Elena Anamaria Man

    2015-11-01

    Full Text Available The purpose of this study is to analyze the steady-state and transient behavior of the electrical and thermal parameters of thermoelectric generators (TEGs. The focus is on the required wait-time between measurements in order to reduce measurement errors which may appear until the system reaches steady-state. By knowing this waiting time, the total characterization time can also be reduced. The experimental characterization process is performed on a test rig known as TEGeta, which can be used to assess the output characteristics of TEG modules under different load values and temperature conditions. The setup offers the possibility to control the hot side temperature up to 1000 °C with a load variation range value between 0.22–8.13 Ω. A total of ten thermocouples are placed in the setup with the purpose of measuring the temperature in specific points between the heater and the heat sink. Based on the readings, the temperature on the hot and cold side of the modules can be extrapolated. This study provides quantitative data on the minimum waiting time of the temperatures in the surrounding system to reach equilibrium. Laboratory tests are performed on a calcium-manganese oxide module at temperatures between 400 and 800 °C to explore the high temperatures features of the setup.

  18. High-harmonic transient grating spectroscopy of NO2 electronic relaxation

    CERN Document Server

    Ruf, H; Ferré, A; Thiré, N; Bertrand, J B; Bonnet, L; Cireasa, R; Constant, E; Corkum, P B; Descamps, D; Fabre, B; Larregaray, P; Mével, E; Petit, S; Pons, B; Staedter, D; Wörner, H J; Villeneuve, D M; Mairesse, Y; Halvick, P; Blanchet, V

    2012-01-01

    We study theoretically and experimentally the electronic relaxation of NO2 molecules excited by absorption of one ~400 nm pump photon. Semi-classical simulations based on trajectory surface hopping calculations are performed. They predict fast oscillations of the electronic character around the intersection of the ground and first excited diabatic states. An experiment based on high-order harmonic transient grating spectroscopy reveals dynamics occuring on the same timescale. A systematic study of the detected transient is conducted to investigate the possible influence of the pump intensity, pump wavelength, and rotational temperature of the molecules. The quantitative agreement between measured and predicted dynamics shows that, in NO2, high harmonic transient grating spectroscopy encodes vibrational dynamics underlying the electronic relaxation.

  19. Time-Dependent Electron Acceleration in Blazar Transients: X-Ray Time Lags and Spectral Formation

    CERN Document Server

    Lewis, Tiffany R; Finke, Justin D

    2016-01-01

    Electromagnetic radiation from blazar jets often displays strong variability, extending from radio to $\\gamma$-ray frequencies. In a few cases, this variability has been characterized using Fourier time lags, such as those detected in the X-rays from Mrk~421 using BeppoSAX. The lack of a theoretical framework to interpret the data has motivated us to develop a new model for the formation of the X-ray spectrum and the time lags in blazar jets based on a transport equation including terms describing stochastic Fermi acceleration, synchrotron losses, shock acceleration, adiabatic expansion, and spatial diffusion. We derive the exact solution for the Fourier transform of the electron distribution, and use it to compute the Fourier transform of the synchrotron radiation spectrum and the associated X-ray time lags. The same theoretical framework is also used to compute the peak flare X-ray spectrum, assuming that a steady-state electron distribution is achieved during the peak of the flare. The model parameters are...

  20. Assessment of reactivity transient experiments with high burnup fuel

    Energy Technology Data Exchange (ETDEWEB)

    Ozer, O.; Yang, R.L.; Rashid, Y.R.; Montgomery, R.O.

    1996-03-01

    A few recent experiments aimed at determining the response of high-burnup LWR fuel during a reactivity initiated accident (RIA) have raised concerns that existing failure criteria may be inappropriate for such fuel. In particular, three experiments (SPERT CDC-859, NSRR HBO-1 and CABRI REP Na-1) appear to have resulted in fuel failures at only a fraction of the anticipated enthalpy levels. In evaluating the results of such RIA simulation experiments, however, it is necessary that the following two key considerations be taken into account: (1) Are the experiments representative of conditions that LWR fuel would experience during an in-reactor RIA event? (2) Is the fuel that is being utilized in the tests representative of the present (or anticipated) population of LWR fuel? Conducting experiments under conditions that can not occur in-reactor can trigger response modes that could not take place during in-reactor operation. Similarly, using unrepresentative fuel samples for the tests will produce failure information that is of limited relevance to commercial LWR fuel. This is particularly important for high-burnup fuel since the manner under which the test samples are base-irradiated prior to the test will impact the mechanical properties of the cladding and will therefore affect the RIA response. A good example of this effect can be seen in the results of the SPERT CDC-859 test and in the NSRR JM-4 and JM-5 tests. The conditions under which the fuel used for these tests was fabricated and/or base-irradiated prior to the RIA pulse resulted in the formation of multiple cladding defects in the form of hydride blisters. When this fuel was subjected to the RIA power pulse, it failed by developing multiple cracks that were closely correlated with the locations of the pre-existing hydride blisters. In the case of the JM tests, many of the cracks formed within the blisters themselves and did not propagate beyond the heavily hydrided regions.

  1. Pressure Transient Behavior of Horizontal Well with Time-Dependent Fracture Conductivity in Tight Oil Reservoirs

    Directory of Open Access Journals (Sweden)

    Qihong Feng

    2017-01-01

    Full Text Available This work presents a discussion on the pressure transient response of multistage fractured horizontal well in tight oil reservoirs. Based on Green’s function, a semianalytical model is put forward to obtain the behavior. Our proposed model accounts for fluid flow in four contiguous regions of the tight formation by using pressure continuity and mass conservation. The time-dependent conductivity of hydraulic fractures, which is ignored in previous models but highlighted by recent experiments, is also taken into account in our proposed model. We also include the effect of pressure drop along a horizontal wellbore. We substantiate the validity of our model and analyze the different flow regimes, as well as the effects of initial conductivity, fracture distribution, and geometry on the pressure transient behavior. Our results suggest that the decrease of fracture conductivity has a tremendous effect on the well performance. Finally, we compare our model results with the field data from a multistage fractured horizontal well in Jimsar sag, Xinjiang oilfield, and a good agreement is obtained.

  2. The time of maximum post-ischemic hyperperfusion indicates infarct growth following transient experimental ischemia.

    Directory of Open Access Journals (Sweden)

    Susanne Wegener

    Full Text Available After recanalization, cerebral blood flow (CBF can increase above baseline in cerebral ischemia. However, the significance of post-ischemic hyperperfusion for tissue recovery remains unclear. To analyze the course of post-ischemic hyperperfusion and its impact on vascular function, we used magnetic resonance imaging (MRI with pulsed arterial spin labeling (pASL and measured CBF quantitatively during and after a 60 minute transient middle cerebral artery occlusion (MCAO in adult rats. We added a 5% CO2 - challenge to analyze vasoreactivity in the same animals. Results from MRI were compared to histological correlates of angiogenesis. We found that CBF in the ischemic area recovered within one day and reached values significantly above contralateral thereafter. The extent of hyperperfusion changed over time, which was related to final infarct size: early (day 1 maximal hyperperfusion was associated with smaller lesions, whereas a later (day 4 maximum indicated large lesions. Furthermore, after initial vasoparalysis within the ischemic area, vasoreactivity on day 14 was above baseline in a fraction of animals, along with a higher density of blood vessels in the ischemic border zone. These data provide further evidence that late post-ischemic hyperperfusion is a sequel of ischemic damage in regions that are likely to undergo infarction. However, it is transient and its resolution coincides with re-gaining of vascular structure and function.

  3. Time-resolved detection of stimulus/task-related networks, via clustering of transient intersubject synchronization.

    Science.gov (United States)

    Bordier, Cécile; Macaluso, Emiliano

    2015-09-01

    Several methods are available for the identification of functional networks of brain areas using functional magnetic resonance imaging (fMRI) time-series. These typically assume a fixed relationship between the signal of the areas belonging to the same network during the entire time-series (e.g., positive correlation between the areas belonging to the same network), or require a priori information about when this relationship may change (task-dependent changes of connectivity). We present a fully data-driven method that identifies transient network configurations that are triggered by the external input and that, therefore, include only regions involved in stimulus/task processing. Intersubject synchronization with short sliding time-windows was used to identify if/when any area showed stimulus/task-related responses. Next, a first clustering step grouped together areas that became engaged concurrently and repetitively during the time-series (stimulus/task-related networks). Finally, for each network, a second clustering step grouped together all the time-windows with the same BOLD signal. The final output consists of a set of network configurations that show stimulus/task-related activity at specific time-points during the fMRI time-series. We label these configurations: "brain modes" (bModes). The method was validated using simulated datasets and a real fMRI experiment with multiple tasks and conditions. Future applications include the investigation of brain functions using complex and naturalistic stimuli.

  4. Monitoring with high temporal resolution to search for optical transients in the wide field

    Science.gov (United States)

    Beskin, Grigory; Bondar, Sergey; Ivanov, Evgeny; Karpov, Sergey; Katkova, Elena; Pozanenko, Alexei; Guarnieri, Adriano; Bartolini, Corrado; Piccioni, Adalberto; Greco, Giuseppe; Molinari, Emilio; Covino, Stefano

    2008-02-01

    In order to detect and investigate short stochastic optical flares from a number of variable astrophysical objects (GRBs, SNs, flare stars, CVs, X-Ray binaries) of unknown localizations as well as near-earth objects (NEOs), both natural and artificial, it is necessary to perform the systematic monitoring of large regions of the sky with high temporal resolution. Here we describe the design of a system able to perform such a task, which consists of a wide-field camera with high time resolution able to detect and classify the transient events on a subsecond time scale, and a fast robotic telescope aimed to perform their detailed investigation. In a last few years we've created the prototype FAVOR wide-field camera, placed at North Caucasus near Russian 6-m telescope, and a complete two-telescope complex TORTOREM, combining TORTORA wide-field camera with REM robotic telescope and placed at La Silla ESO observatory. Its technical parameters and first results of operation are described.

  5. High-Frequency X-ray Variability Detection in A Black Hole Transient with USA.

    Energy Technology Data Exchange (ETDEWEB)

    Shabad, Gayane

    2000-10-16

    Studies of high-frequency variability (above {approx}100 Hz) in X-ray binaries provide a unique opportunity to explore the fundamental physics of spacetime and matter, since the orbital timescale on the order of several milliseconds is a timescale of the motion of matter through the region located in close proximity to a compact stellar object. The detection of weak high-frequency signals in X-ray binaries depends on how well we understand the level of Poisson noise due to the photon counting statistics, i.e. how well we can understand and model the detector deadtime and other instrumental systematic effects. We describe the preflight timing calibration work performed on the Unconventional Stellar Aspect (USA) X-ray detector to study deadtime and timing issues. We developed a Monte Carlo deadtime model and deadtime correction methods for the USA experiment. The instrumental noise power spectrum can be estimated within {approx}0.1% accuracy in the case when no energy-dependent instrumental effect is present. We also developed correction techniques to account for an energy-dependent instrumental effect. The developed methods were successfully tested on USA Cas A and Cygnus X-1 data. This work allowed us to make a detection of a weak signal in a black hole candidate (BHC) transient.

  6. Study of water flowrate using time transient and cross-correlation techniques with {sup 82}Br radiotracer; Estudo da vazao da agua utilizando as tecnicas de transiente de tempo e cross-correlacao com 82-Bromine como radiotracador

    Energy Technology Data Exchange (ETDEWEB)

    Salgado, William L., E-mail: william.otero@hotmail.com [Instituto Federal do Rio de Janeiro (IFRJ), Rio de Janeiro, RJ (Brazil); Brandao, Luiz E.B., E-mail: brandao@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2013-07-01

    This paper aims to determinate the water flowrate using Time Transient and Cross-Correlation techniques. The detection system uses two NaI (T1) detectors adequately positioned on the outside of pipe and a gamma-ray source ({sup 82}Br radiotracer). The water flowrate measurements using Time Transient and Cross-Correlation techniques were compared to invasive conventional measurements of the flowrate previously installed in pipeline. Discrepancies between Time Transient and Cross-Correlation techniques flowmeter previously installed in pipeline. Discrepancies between Time Transient and Cross-Correlation techniques flowrate values were found to be less than 3% in relation to conventional ones. (author)

  7. Timing Studies on X-Per and Discovery of its Transient QPO Feature

    CERN Document Server

    Acuner, Z; Sahiner, S; Serim, M M; Baykal, A; Swank, J

    2014-01-01

    We present timing analysis of RXTE-PCA and INTEGRAL-ISGRI observations of X Per between 1998 and 2010. All pulse arrival times obtained from the RXTE-PCA observations are phase connected and timing solution is obtained using these arrival times. We update long term pulse frequency history of the source by measuring pulse frequencies from RXTE-PCA and INTEGRAL-ISGRI data. From RXTE-PCA data, the relation between frequency derivative and X-ray flux suggests accretion via companion's stellar wind. On the other hand, detection of the transient QPO feature peaking at $\\sim 0.2$ Hz suggests the existence of an accretion disc. From the average intensity power spectra, we find that double break model fits the power spectra well which suggests that the source has at least two different accretion flow components dominating the overall flow. From the power spectra of frequency derivatives, we measure a power law index of $\\sim -1$ which implies that on short time scales disc accretion dominates over noise, while on time...

  8. Plant analyzer for high-speed interactive simulation of BWR power plant transients

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, H.S.; Lekach, S.V.; Mallen, A.N.; Wulff, W.; Cerbone, R.J.

    1984-04-01

    A combination of advanced modeling techniques and modern, special-purpose peripheral minicomputer technology is presented which affords realistic predictions of plant transient and severe off-normal events in LWR power plants through on-line simulations at a speed ten times faster than actual process speeds. Results are shown for a BWR plant simulation. The mathematical models account for nonequilibrium, nonhomogeneous two-phase flow effects in the coolant, for acoustical effects in the steam line and for the dynamics of the recirculation loop and feedwater train. Point kinetics incorporate reactivity feedback due to void fraction, fuel temperature, coolant temperature, and boron concentration. Control systems and trip logic are simulated for the nuclear steam supply system. The AD10 of Applied Dynamics International is the special-purpose peripheral processor. It is specifically designed for high-speed digital system simulation, accommodates hardware (instrumentation) in the input/output loop, and operates interactively on-line, like an analog computer. Results are shown to demonstrate computing capacity, accuracy, and speed. Simulation speeds have been achieved which are orders of magnitude faster than those of a CDC-7600 mainframe computer or ten times faster than real-time speed.

  9. Transient tracking of low and high-order eccentricity-related components in induction motors via TFD tools

    Science.gov (United States)

    Climente-Alarcon, V.; Antonino-Daviu, J.; Riera-Guasp, M.; Pons-Llinares, J.; Roger-Folch, J.; Jover-Rodriguez, P.; Arkkio, A.

    2011-02-01

    The present work is focused on the diagnosis of mixed eccentricity faults in induction motors via the study of currents demanded by the machine. Unlike traditional methods, based on the analysis of stationary currents (Motor Current Signature Analysis (MCSA)), this work provides new findings regarding the diagnosis approach proposed by the authors in recent years, which is mainly focused on the fault diagnosis based on the analysis of transient quantities, such as startup or plug stopping currents (Transient Motor Current Signature Analysis (TMCSA)), using suitable time-frequency decomposition (TFD) tools. The main novelty of this work is to prove the usefulness of tracking the transient evolution of high-order eccentricity-related harmonics in order to diagnose the condition of the machine, complementing the information obtained with the low-order components, whose transient evolution was well characterised in previous works. Tracking of high-order eccentricity-related harmonics during the transient, through their associated patterns in the time-frequency plane, may significantly increase the reliability of the diagnosis, since the set of fault-related patterns arising after application of the corresponding TFD tool is very unlikely to be caused by other faults or phenomena. Although there are different TFD tools which could be suitable for the transient extraction of these harmonics, this paper makes use of a Wigner-Ville distribution (WVD)-based algorithm in order to carry out the time-frequency decomposition of the startup current signal, since this is a tool showing an excellent trade-off between frequency resolution at both high and low frequencies. Several simulation results obtained with a finite element-based model and experimental results show the validity of this fault diagnosis approach under several faulty and operating conditions. Also, additional signals corresponding to the coexistence of the eccentricity and other non-fault related phenomena making

  10. RF control at transient beamloading for high-duty-factor linacs

    Energy Technology Data Exchange (ETDEWEB)

    Chernogubovsky, M.A.; Sugimoto, Masayoshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-08-01

    An effective RF control with the transient beamloading is the major issue in the operation of the high-duty-factor linacs to suppress the undesirable beam loss. The RF control method is considered to obtain the control principle and the state equation, under the analysis of electrodynamical properties of the excitation in the resonator of the linac due to the transient beamloading. The concept of the directional selective coupling is applied for the RF system to define the main characteristics and to optimize the RF control parameters. (author)

  11. Searches for radio transients

    CERN Document Server

    Bhat, N D R

    2011-01-01

    Exploration of the transient Universe is an exciting and fast-emerging area within radio astronomy. Known transient phenomena range in time scales from sub-nanoseconds to years or longer, thus spanning a huge range in time domain and hinting a rich diversity in their underlying physical processes. Transient phenomena are likely locations of explosive or dynamic events and they offer tremendous potential to uncover new physics and astrophysics. A number of upcoming next-generation radio facilities and recent advances in computing and instrumentation have provided a much needed impetus for this field which has remained a relatively uncharted territory for the past several decades. In this paper we focus mainly on the class of phenomena that occur on very short time scales (i.e. from $\\sim$ milliseconds to $\\sim$ nanoseconds), known as {\\it fast transients}, the detections of which involve considerable signal processing and data management challenges, given the high time and frequency resolutions required in the...

  12. Testing the necessity of transient spikes in the drivers for creating a storm-time ring current

    Science.gov (United States)

    Liemohn, M. W.; Ilie, R.; Ridley, A. J.; Kozyra, J. U.; Thomsen, M. F.; Borovsky, J. E.

    2007-12-01

    The role of transient spikes in upstream solar wind parameters and near-Earth plasma sheet parameters is investigated through a series of numerical simulations. During magnetic storms, the near-Earth plasma sheet density (as observed at geosynchronous altitude) is often enhanced relative to its normal, quiescent level. In addition to a baseline increase of the density of up to a few per cubic centimeter lasting several hours, there are usually short-lived (a few to tens of minutes) increases on top of this (up to double the baseline). In addition, the solar wind parameters also often have numerous short-lived spikes and fluctuations within it. The question then arises of the relative contribution of these transient spikes in the drivers to the storm-time ring current intensity. To address this issue, a series of simulations are conducted using the Hot Electron and Ion Drift Integrator (HEIDI) model (formerly the Michigan version of RAM). Various running averages of the upstream solar wind conditions and geosynchronous orbit nightside boundary conditions are used to drive HEIDI. It is found that the spikes are simply adding a linear contribution to the ring current intensity over the baseline (averaged) input levels, and that any nonlinear influences occur beyond the HEIDI simulation domain (i.e., at high latitudes or in the tail). That is, the spikes do not last long enough to develop nonlinear influences on the ring current's total energy content. The HEIDI results are compared against global magnetospheric modeling results using averaged input parameters into the Space Weather Modeling Framework (SWMF), which show a nonlinear response to transient spikes.

  13. Simplified method for ultra high-resolution photoacoustic microscopy via transient absorption.

    Science.gov (United States)

    Mattison, Scott P; Applegate, Brian E

    2014-08-01

    Photoacoustic microscopy (PAM) is a hybrid imaging modality that combines optical illumination with ultrasonic detection to achieve absorption contrast imaging of endogenous and exogenous chromophores. Optical resolution PAM achieves high lateral-resolution by tightly focusing the excitation light; however the axial resolution is still dependent upon the bandwidth of the ultrasonic transducer. As a result, PAM images have highly asymmetric voxels with submicron lateral resolution and axial resolution typically limited to tens of microns. We have previously reported on a resonant multiphoton approach to PAM called transient absorption ultrasonic microscopy (TAUM), which enables high axial resolution by frequency encoding the photoacoustic signal at the overlap of a pump and a probe beam. This approach enables photoacoustic imaging with subcellular resolution on par with other multiphoton microscopy techniques. Here, we report on an innovation that enables TAUM imaging with a much less sophisticated optical system than previously reported. If we allow the time delay between the pump and probe to collapse to zero, the pump and probe optical paths can be combined. An amplitude modulator in the single beam path is sufficient to encode the TAUM signal at the second harmonic of the modulation frequency. The resulting system is essentially a standard optical resolution PAM system that incorporates an amplitude modulator and utilizes a Fourier post processing algorithm to improve the axial resolution by approximately an order of magnitude. A prototype system based on this approach has been assembled and tested on fixed bovine erythrocytes.

  14. Investigation of transient temperature's influence on damage of high-speed sliding electrical contact rail surface

    Science.gov (United States)

    Zhang, Yuyan; Sun, Shasha; Guo, Quanli; Yang, Degong; Sun, Dongtao

    2016-11-01

    In the high speed sliding electrical contact with large current, the temperature of contact area rises quickly under the coupling action of the friction heating, the Joule heating and electric arc heating. The rising temperature seriously affects the conductivity of the components and the yield strength of materials, as well affects the contact state and lead to damage, so as to shorten the service life of the contact elements. Therefore, there is vital significance to measure the temperature accurately and investigate the temperature effect on damage of rail surface. Aiming at the problem of components damage in high speed sliding electrical contact, the transient heat effect on the contact surface was explored and its influence and regularity on the sliding components damage was obtained. A kind of real-time temperature measurement method on rail surface of high speed sliding electrical contact is proposed. Under the condition of 2.5 kA current load, based on the principle of infrared radiation non-contact temperature sensor was used to measure the rail temperature. The dynamic distribution of temperature field was obtained through the simulation analysis, further, the connection between temperature changes and the rail surface damage morphology, the damage volume was analyzed and established. Finally, the method to reduce rail damage and improve the life of components by changing the temperature field was discussed.

  15. Observing the chain stretch transition in a highly entangled polyisoprene melt using transient extensional rheometry

    DEFF Research Database (Denmark)

    Nielsen, Jens Kromann; Hassager, Ole; Rasmussen, Henrik K.

    2009-01-01

    We measure the viscoelastic properties of a highly entangled narrow molecular weight polyisoprene melt with approximately 280 entanglements per chain in steady and transient shear and in elongational flows. The storage and loss moduli of the melt are found to be well described by the Milner and M...

  16. High glucose-induced oxidative stress increases transient receptor potential channel expression in human monocytes

    DEFF Research Database (Denmark)

    Wuensch, Tilo; Thilo, Florian; Krueger, Katharina;

    2010-01-01

    Transient receptor potential (TRP) channel-induced cation influx activates human monocytes, which play an important role in the pathogenesis of atherosclerosis. In the present study, we investigated the effects of high glucose-induced oxidative stress on TRP channel expression in human monocytes....

  17. Transient Dynamics of Fluoride-Based High Concentration Erbium/Cerium Co-Doped Fiber Amplifier

    Institute of Scientific and Technical Information of China (English)

    S. S-H. Yam; Y. Akasaka; Y. Kubota; R. Huang; D. L. Harris; J. Pan

    2003-01-01

    We designed and evaluated a fluoride-based high concentration erbium/ cerium co-doped fiber amplifier. It is suitable for Metropolitan Area Networks due to faster transient, flatter (unfiltered) gain, smaller footprint and gain excursion than its silica-based counterpart.

  18. Adiabatic Green's function technique and transient behavior in time-dependent fermion-boson coupled models

    Science.gov (United States)

    Oh, Yun-Tak; Higashi, Yoichi; Chan, Ching-Kit; Han, Jung Hoon

    2016-08-01

    The Lang-Firsov Hamiltonian, a well-known solvable model of interacting fermion-boson system with sideband features in the fermion spectral weight, is generalized to have the time-dependent fermion-boson coupling constant. We show how to derive the two-time Green's function for the time-dependent problem in the adiabatic limit, defined as the slow temporal variation of the coupling over the characteristic oscillator period. The idea we use in deriving the Green's function is akin to the use of instantaneous basis states in solving the adiabatic evolution problem in quantum mechanics. With such "adiabatic Green's function" at hand we analyze the transient behavior of the spectral weight as the coupling is gradually tuned to zero. Time-dependent generalization of a related model, the spin-boson Hamiltonian, is analyzed in the same way. In both cases the sidebands arising from the fermion-boson coupling can be seen to gradually lose their spectral weights over time. Connections of our solution to the two-dimensional Dirac electrons coupled to quantized photons are discussed.

  19. Transient deformation from daily GPS displacement time series: postseismic deformation, ETS and evolving strain rates

    Science.gov (United States)

    Bock, Y.; Fang, P.; Moore, A. W.; Kedar, S.; Liu, Z.; Owen, S. E.; Glasscoe, M. T.

    2016-12-01

    Detection of time-dependent crustal deformation relies on the availability of accurate surface displacements, proper time series analysis to correct for secular motion, coseismic and non-tectonic instrument offsets, periodic signatures at different frequencies, and a realistic estimate of uncertainties for the parameters of interest. As part of the NASA Solid Earth Science ESDR System (SESES) project, daily displacement time series are estimated for about 2500 stations, focused on tectonic plate boundaries and having a global distribution for accessing the terrestrial reference frame. The "combined" time series are optimally estimated from independent JPL GIPSY and SIO GAMIT solutions, using a consistent set of input epoch-date coordinates and metadata. The longest time series began in 1992; more than 30% of the stations have experienced one or more of 35 major earthquakes with significant postseismic deformation. Here we present three examples of time-dependent deformation that have been detected in the SESES displacement time series. (1) Postseismic deformation is a fundamental time-dependent signal that indicates a viscoelastic response of the crust/mantle lithosphere, afterslip, or poroelastic effects at different spatial and temporal scales. It is critical to identify and estimate the extent of postseismic deformation in both space and time not only for insight into the crustal deformation and earthquake cycles and their underlying physical processes, but also to reveal other time-dependent signals. We report on our database of characterized postseismic motions using a principal component analysis to isolate different postseismic processes. (2) Starting with the SESES combined time series and applying a time-dependent Kalman filter, we examine episodic tremor and slow slip (ETS) in the Cascadia subduction zone. We report on subtle slip details, allowing investigation of the spatiotemporal relationship between slow slip transients and tremor and their

  20. Goal-oriented space-time adaptivity for transient dynamics using a modal description of the adjoint solution

    Science.gov (United States)

    Verdugo, Francesc; Parés, Núria; Díez, Pedro

    2014-08-01

    This article presents a space-time adaptive strategy for transient elastodynamics. The method aims at computing an optimal space-time discretization such that the computed solution has an error in the quantity of interest below a user-defined tolerance. The methodology is based on a goal-oriented error estimate that requires accounting for an auxiliary adjoint problem. The major novelty of this paper is using modal analysis to obtain a proper approximation of the adjoint solution. The idea of using a modal-based description was introduced in a previous work for error estimation purposes. Here this approach is used for the first time in the context of adaptivity. With respect to the standard direct time-integration methods, the modal solution of the adjoint problem is highly competitive in terms of computational effort and memory requirements. The performance of the proposed strategy is tested in two numerical examples. The two examples are selected to be representative of different wave propagation phenomena, one being a 2D bulky continuum and the second a 2D domain representing a structural frame.

  1. Transient modeling of the thermohydraulic behavior of high temperature heat pipes for space reactor applications

    Science.gov (United States)

    Hall, Michael L.; Doster, Joseph M.

    1986-01-01

    Many proposed space reactor designs employ heat pipes as a means of conveying heat. Previous researchers have been concerned with steady state operation, but the transient operation is of interest in space reactor applications due to the necessity of remote startup and shutdown. A model is being developed to study the dynamic behavior of high temperature heat pipes during startup, shutdown and normal operation under space environments. Model development and preliminary results for a hypothetical design of the system are presented.

  2. High-resolution photoinduced transient spectroscopy of neutron irradiated bulk silicon

    CERN Document Server

    Kozlowski, R; Nossarzhevska, E

    2002-01-01

    High-resolution photoinduced transient spectroscopy has been employed in a study on the formation of defects in bulk silicon due to 1 MeV neutron irradiation. Apart from divacancies in various charge states, complexes involving interstitial carbon and oxygen were revealed. The defect structure of float zone and Czochralski-grown material exposed to fluences of 2x10 sup 1 sup 4 and 6.75x10 sup 1 sup 4 cm sup - sup 2 is compared.

  3. Gas-Phase Molecular Dynamics: High Resolution Spectroscopy and Collision Dynamics of Transient Species

    Energy Technology Data Exchange (ETDEWEB)

    Hall, G.E.

    2011-05-31

    This research is carried out as part of the Gas-Phase Molecular Dynamics program in the Chemistry Department at Brookhaven National Laboratory. Chemical intermediates in the elementary gas-phase reactions involved in combustion chemistry are investigated by high resolution spectroscopic tools. Production, reaction, and energy transfer processes are investigated by transient, double resonance, polarization and saturation spectroscopies, with an emphasis on technique development and connection with theory, as well as specific molecular properties.

  4. DESAlert: Enabling Real-Time Transient Follow-Up with Dark Energy Survey Data

    Energy Technology Data Exchange (ETDEWEB)

    Poci, A.; Kuehn, K.; Abbott, T.; Abdalla, F. B.; Allam, S.; Bauer, A. H.; Benoit-Lévy, A.; Bertin, E.; Brooks, D.; Brown, P. J.; Buckley-Geer, E.; Burke, D. L.; Rosell, A. Carnero; Kind, M. Carrasco; Covarrubias, R.; da Costa, L. N.; D’Andrea, C. B.; DePoy, D. L.; Desai, S.; Dietrich, J. P.; Cunha, C. E.; Eifler, T. F.; Estrada, J.; Evrard, A. E.; Neto, A. Fausti; Finley, D. A.; Flaugher, B.; Fosalba, P.; Frieman, J.; Gerdes, D.; Gruen, D.; Gruendl, R. A.; Honscheid, K.; James, D.; Kuropatkin, N.; Lahav, O.; Li, T. S.; March, M.; Marshall, J.; Merritt, K. W.; Miller, C. J.; Nichol, R. C.; Nord, B.; Ogando, R.; Plazas, A. A.; Romer, A. K.; Roodman, A.; Rykoff, E. S.; Sako, M.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Sevilla, I.; Smith, C.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Tarle, G.; Thaler, J.; Thomas, R. C.; Tucker, D.; Walker, A. R.; Wester, W.

    2016-01-01

    The Dark Energy Survey is undertaking an observational programme imaging 1/4 of the southern hemisphere sky with unprecedented photometric accuracy. In the process of observing millions of faint stars and galaxies to constrain the parameters of the dark energy equation of state, the Dark Energy Survey will obtain pre-discovery images of the regions surrounding an estimated 100 gamma-ray bursts over 5 yr. Once gamma-ray bursts are detected by, e.g., theSwiftsatellite, the DES data will be extremely useful for follow-up observations by the transient astronomy community. We describe a recently-commissioned suite of software that listens continuously for automated notices of gamma-ray burst activity, collates information from archival DES data, and disseminates relevant data products back to the community in near-real-time. Of particular importance are the opportunities that non-public DES data provide for relative photometry of the optical counterparts of gamma-ray bursts, as well as for identifying key characteristics (e.g., photometric redshifts) of potential gamma-ray burst host galaxies. We provide the functional details of the DESAlert software, and its data products, and we show sample results from the application of DESAlert to numerous previously detected gamma-ray bursts, including the possible identification of several heretofore unknown gamma-ray burst hosts.

  5. Time-frequency analysis of transient-evoked otoacoustic emissions in children exposed to carboplatin chemotherapy.

    Science.gov (United States)

    Bhagat, Shaum; Bass, Johnnie; Qaddoumi, Ibrahim; Brennan, Rachel; Wilson, Matthew; Wu, Jianrong; Galindo, Carlos-Rodriguez; Paglialonga, Alessia; Tognola, Gabriella

    2013-01-01

    The aims of this study were to characterize and quantify time-frequency changes in transient-evoked otoacoustic emissions (TEOAEs) recorded in children diagnosed with retinoblastoma who were receiving carboplatin chemotherapy. A signal processing technique, the wavelet transform (WT), was used to analyze TEOAE waveforms in narrow-band frequency components. Ten children (aged 3-72 months) diagnosed with unilateral or bilateral retinoblastoma were enrolled in the study. TEOAEs were acquired from the children with linear sequences of 70 dB peak equivalent SPL clicks. After WT analysis, TEOAE energy, latency and normalized energy in the narrow-band frequency components were compared before and during carboplatin chemotherapy treatment (average dose 1693 mg/m2). On a group basis, no significant differences (p>0.05) in the TEOAE energy, latency or normalized energy before and after carboplatin treatment were observed. There were decreases in normalized energy on an individual basis in 10 out of 18 ears in the sample. Exposure to carboplatin chemotherapy did not cause significant changes in TEOAE energy, latency and normalized energy during treatment. However, long-term monitoring of hearing with measurements of TEOAEs is warranted, given the risks of delayed hearing loss in some children receiving carboplatin chemotherapy.

  6. DESAlert: Enabling Real-Time Transient Follow-Up with Dark Energy Survey Data

    Science.gov (United States)

    Poci, A.; Kuehn, K.; Abbott, T.; Abdalla, F. B.; Allam, S.; Bauer, A. H.; Benoit-Lévy, A.; Bertin, E.; Brooks, D.; Brown, P. J.; Buckley-Geer, E.; Burke, D. L.; Rosell, A. Carnero; Kind, M. Carrasco; Covarrubias, R.; da Costa, L. N.; D'Andrea, C. B.; DePoy, D. L.; Desai, S.; Dietrich, J. P.; Cunha, C. E.; Eifler, T. F.; Estrada, J.; Evrard, A. E.; Neto, A. Fausti; Finley, D. A.; Flaugher, B.; Fosalba, P.; Frieman, J.; Gerdes, D.; Gruen, D.; Gruendl, R. A.; Honscheid, K.; James, D.; Kuropatkin, N.; Lahav, O.; Li, T. S.; March, M.; Marshall, J.; Merritt, K. W.; Miller, C. J.; Nichol, R. C.; Nord, B.; Ogando, R.; Plazas, A. A.; Romer, A. K.; Roodman, A.; Rykoff, E. S.; Sako, M.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Sevilla, I.; Smith, C.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Tarle, G.; Thaler, J.; Thomas, R. C.; Tucker, D.; Walker, A. R.; Wester, W.; DES Collaboration

    2016-09-01

    The Dark Energy Survey is undertaking an observational programme imaging 1/4 of the southern hemisphere sky with unprecedented photometric accuracy. In the process of observing millions of faint stars and galaxies to constrain the parameters of the dark energy equation of state, the Dark Energy Survey will obtain pre-discovery images of the regions surrounding an estimated 100 gamma-ray bursts over 5 yr. Once gamma-ray bursts are detected by, e.g., the Swift satellite, the DES data will be extremely useful for follow-up observations by the transient astronomy community. We describe a recently-commissioned suite of software that listens continuously for automated notices of gamma-ray burst activity, collates information from archival DES data, and disseminates relevant data products back to the community in near-real-time. Of particular importance are the opportunities that non-public DES data provide for relative photometry of the optical counterparts of gamma-ray bursts, as well as for identifying key characteristics (e.g., photometric redshifts) of potential gamma-ray burst host galaxies. We provide the functional details of the DESAlert software, and its data products, and we show sample results from the application of DESAlert to numerous previously detected gamma-ray bursts, including the possible identification of several heretofore unknown gamma-ray burst hosts.

  7. DESAlert: Enabling Real-Time Transient Follow-Up with Dark Energy Survey Data

    CERN Document Server

    Poci, A; :,; Abbott, T; Abdalla, F B; Allam, S; Bauer, A H; Benoit-Lévy, A; Bertin, E; Brooks, D; Brown, P J; Buckley-Geer, E; Burke, D L; Rosell, A Carnero; Kind, M Carrasco; Covarrubias, R; da Costa, L N; D'Andrea, C B; DePoy, D L; Desai, S; Dietrich, J P; Cunha, C E; Eifler, T F; Estrada, J; Evrard, A E; Neto, A Fausti; Finley, D A; Flaugher, B; Fosalba, P; Frieman, J; Gerdes, D; Gruen, D; Gruendl, R A; Honscheid, K; James, D; Kuropatkin, N; Lahav, O; Li, T S; March, M; Marshall, J; Merritt, K W; Miller, C J; Nichol, R C; Nord, B; Ogando, R; Plazas, A A; Romer, A K; Roodman, A; Rykoff, E S; Sako, M; Sanchez, E; Scarpine, V; Schubnell, M; Sevilla, I; Smith, C; Soares-Santos, M; Sobreira, F; Suchyta, E; Swanson, M E C; Tarle, G; Thaler, J; Thomas, R C; Tucker, D; Walker, A R; Wester, W

    2015-01-01

    The Dark Energy Survey (DES) is currently undertaking an observational program imaging $1/4$ of the southern hemisphere sky with unprecedented photometric accuracy. In the process of observing millions of faint stars and galaxies to constrain the parameters of the dark energy equation of state, the DES will obtain pre-discovery images of the regions surrounding an estimated 100 gamma-ray bursts (GRBs) over five years. Once GRBs are detected by, e.g., the Swift satellite, the DES data will be extremely useful for follow-up observations by the transient astronomy community. We describe a recently-commissioned suite of software that listens continuously for automated notices of GRB activity, collates useful information from archival DES data, and promulgates relevant data products back to the community in near-real-time. Of particular importance are the opportunities that DES data provide for relative photometry of GRBs or their afterglows, as well as for identifying key characteristics (e.g., photometric redshi...

  8. Black Box Real-Time Transient Absorption Spectroscopy and Electron Correlation

    Science.gov (United States)

    Parkhill, John

    2017-06-01

    We introduce an atomistic, all-electron, black-box electronic structure code to simulate transient absorption (TA) spectra and apply it to simulate pyrazole and a GFP- chromophore derivative1. The method is an application of OSCF2, our dissipative exten- sion of time-dependent density-functional theory. We compare our simulated spectra directly with recent ultra-fast spectroscopic experiments. We identify features in the TA spectra to Pauli-blocking which may be missed without a first-principles model. An important ingredient in this method is the stationary-TDDFT correction scheme recently put forwards by Fischer, Govind, and Cramer which allows us to overcome a limitation of adiabatic TDDFT. We demonstrate that OSCF2 is able to reproduce the energies of bleaches and induced absorptions, as well as the decay of the transient spectrum, with only the molecular structure as input. We show that the treatment of electron correlation is the biggest hurdle for TA simulations, which motivates the second half of the talk a new method for realtime electron correlation. We continue to derive and propagate self-consistent electronic dynamics. Extending our derivation of OSCF2 to include electron correlation we obtain a non-linear correlated one-body equation of motion which corrects TDHF. Similar equations are known in quantum kinetic theory, but rare in electronic structure. We introduce approximations that stabilize the theory and reduce its computational cost. We compare the resulting dynamics with well-known exact and approximate theories showing improvements over TDHF. When propagated EE2 changes occupation numbers like exact theory, an important feature missing from TDHF or TDDFT. We introduce a rotating wave approximation to reduce the scaling of the model to O(N^4), and enable propagation on realistically large systems. The equation-of-motion does not rely on a pure-state model for the electronic state, and could be used to study the relationship between electron

  9. CFD simulations of transient load change on a high head Francis turbine

    Science.gov (United States)

    Jakobsen, Ken-Robert G.; Aasved Holst, Martin

    2017-01-01

    Motivated by the importance of better understanding the structural integrity of high-head hydraulic turbines operating at intermittent conditions, complete 360º steady-state and transient simulations of a Francis turbine are presented in this paper. The main target of the work has been to investigate different numerical approaches such as mesh deformation for different operating conditions. Steady-state simulations were performed at the best efficiency point (BEP) and used as initial conditions for the transient simulations considering load rejection from BEP to part load (BEP2PL) and during load acceptance from BEP to high load (BEP2HL). Simulation results were compared with experimental data available for the Francis-99 project where close agreement was found for the mesh independent solution. The transient load analyses showed general trends in accordance with the measurement reports, especially for the pressure in vaneless space that is of high importance regarding RSI effects. Some deviations were identified for the net head at load rejection for which further investigations will be conducted. All CFD simulations were performed at model scale with ANSYS CFX v. 17 at either 96 or 120 cores (2.60 GHz). The immersed boundary technique was tested during the initial stages of the project, but had to be abandoned due to severe memory requirements. Pressure amplitudes and other instantaneous results were not considered.

  10. Reduced-order modellin for high-pressure transient flow of hydrogen-natural gas mixture

    Science.gov (United States)

    Agaie, Baba G.; Khan, Ilyas; Alshomrani, Ali Saleh; Alqahtani, Aisha M.

    2017-05-01

    In this paper the transient flow of hydrogen compressed-natural gas (HCNG) mixture which is also referred to as hydrogen-natural gas mixture in a pipeline is numerically computed using the reduced-order modelling technique. The study on transient conditions is important because the pipeline flows are normally in the unsteady state due to the sudden opening and closure of control valves, but most of the existing studies only analyse the flow in the steady-state conditions. The mathematical model consists in a set of non-linear conservation forms of partial differential equations. The objective of this paper is to improve the accuracy in the prediction of the HCNG transient flow parameters using the Reduced-Order Modelling (ROM). The ROM technique has been successfully used in single-gas and aerodynamic flow problems, the gas mixture has not been done using the ROM. The study is based on the velocity change created by the operation of the valves upstream and downstream the pipeline. Results on the flow characteristics, namely the pressure, density, celerity and mass flux are based on variations of the mixing ratio and valve reaction and actuation time; the ROM computational time cost advantage are also presented.

  11. Time response of Cd0.9Zn0.1Te crystals under transient and pulsed irradiation

    Directory of Open Access Journals (Sweden)

    X. C. Zhao

    2012-03-01

    Full Text Available A CdZnTe detector based on high-quality Cd0.9Zn0.1Te crystals was developed and tested as a monitor in high-intensity radiation fields. The current–voltage measurements were performed using thermally evaporated Au contacts deposited on the crystals, which revealed resistivity of 1010 Ω·cm. Typical leakage current for the planar devices was ∼3 nA for a field strength of 1000 V·cm–1. The test results show that the CdZnTe detector has a fast time response, with a rise time of approximately 2 ns, when exposed to transient and pulsed irradiation of X-rays or electron beams. The decay of current curves is observed and discussed according to charge carrier trapping effects and space-charge accumulation mechanisms. It is suggested that the current decreases quickly with strengthening of the electric field, possibly because of charge de-trapping.

  12. Numerical study on transient flow in the deep naturally fractured reservoir with high pressure

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    According to the experimental results and the characteristics of the pressure-sensitive fractured formation, a transient flow model is developed for the deep naturally-fractured reservoirs with different outer boundary conditions. The finite element equations for the model are derived. After generating the unstructured grids in the solution regions, the finite element method is used to calculate the pressure type curves for the pressure-sensitive fractured reservoir with different outer boundaries, such as the infinite boundary, circle boundary and combined linear boundaries, and the characteristics of the type curves are comparatively analyzed. The effects on the pressure curves caused by pressure sensitivity module and the effective radius combined parameter are determined, and the method for calculating the pressure-sensitive reservoir parameters is introduced. By analyzing the real field case in the high temperature and pressure reservoir, the perfect results show that the transient flow model for the pressure-sensitive fractured reservoir in this paper is correct.

  13. Numerical study on transient flow in the deep naturally fractured reservoir with high pressure

    Institute of Scientific and Technical Information of China (English)

    LIU YueWu; CHEN WeiLiang; LIU QingQuan

    2009-01-01

    According to the experimental results and the characteristics of the pressure-sensitive fractured for-mation, a transient flow model is developed for the deep naturally-fractured reservoirs with different outer boundary conditions. The finite element equations for the model are derived. After generating the unstructured grids in the solution regions, the finite element method is used to calculate the pressure type curves for the pressure-eensitive fractured reservoir with different outer boundaries, such as the infinite boundary, circle boundary and combined linear boundaries, and the characteristics of the type curves are comparatively analyzed. The effects on the pressure curves caused by pressure sensitivity module and the effective radius combined parameter are determined, and the method for calculating the pressure-sensitive reservoir parameters is introduced. By analyzing the real field case in the high temperature end pressure reservoir, the perfect results show that the transient flow model for the pressure-sensitive fractured reservoir in this paper is correct.

  14. Understanding chemical-potential-related transient pore-pressure response to improve real-time borehole (in)stability predictions

    Energy Technology Data Exchange (ETDEWEB)

    Tare, U.A.; Mody, F.K.; Mese, A.I. [Halliburton Energy Services, Cairo (Egypt)

    2000-11-01

    Experimental studies were conducted to explain the concept of a real-time wellbore (in)stability logging methodology. The role of the chemical potential of drilling fluids on transient pore pressure and time-dependent rock property alterations of shale formations was examined by providing details about a pore pressure transmission (PPT) test. The PPT experiments exposed formation (shale) cores under simulated downhole conditions to various salt solutions and drilling fluids. The main objective was to translate the results of the PPT tests to actual drilling conditions. A 20 per cent w/w calcium chloride solution was exposed to a Pierre II shale under high pressure in the PPT apparatus. The PPT test was used to estimate the impact of a drilling fluid on shale pore pressure. The efficiency of the salt solution/shale system was also estimated. Estimates of the dynamic rock properties were made based on the obtained acoustic data. It was determined that in order to accurately model time-dependent wellbore (in)stability in the field, it is important to calibrate representative shale core response to drilling fluids under realistic in-situ conditions. The 20 per cent w/w calcium chloride solution showed very low membrane efficiency of 4.45 per cent. It was concluded that changes in the shale dynamic rock properties as a function of test fluid exposure can be obtained from the simultaneous acquisition of sonic compression and shear wave velocity data. 12 refs., 5 figs.

  15. A Multi-Beam Radio Transient Detector With Real-Time De-Dispersion Over a Wide DM Range

    CERN Document Server

    Clarke, Nathan; Navarro, Robert; Trinh, Joseph

    2014-01-01

    Isolated, short dispersed pulses of radio emission of unknown origin have been reported and there is strong interest in wide-field, sensitive searches for such events. To achieve high sensitivity, large collecting area is needed and dispersion due to the interstellar medium should be removed. To survey a large part of the sky in reasonable time, a telescope that forms multiple simultaneous beams is desirable. We have developed a novel FPGA-based transient search engine that is suitable for these circumstances. It accepts short-integration-time spectral power measurements from each beam of the telescope, performs incoherent de-dispersion simultaneously for each of a wide range of dispersion measure (DM) values, and automatically searches the de-dispersed time series for pulse-like events. If the telescope provides buffering of the raw voltage samples of each beam, then our system can provide trigger signals to allow data in those buffers to be saved when a tentative detection occurs; this can be done with a la...

  16. Transient time period analysis of smooth handoffs in mobile IP networks and its application to media streaming

    Science.gov (United States)

    Lee, Dongwook; Kim, JongWon

    2003-11-01

    Streaming media applications over mobile IP networks suffer from playback disruptions resulting from handoff blackout period as well as bandwidth fluctuation. To overcome buffer shortage, pre-buffering technique can be adopted where the client stores sufficient amount of stream in advance. However, under the mobile IP handoff that may take up to several seconds, it is extremely difficult to sustain seamless playback. Inaccurate and conservative choice on the required buffering size can waste limited latency budget, resulting in quality degradation. In this paper, we are extending--from smooth handoff to fast handoff of mobile IPv6--the transient time analysis recently proposed to approximate transient time durations, STP (silent time period) and UTP (unstable time period). The approximated time periods are utilized to estimate the required buffering buffer size accurately. Network simulation result evaluted under simplified buffering strategies shows that the proposed scheme can provide appropriate guideline on the buffer parameters and thus can improve seamless streaming.

  17. Real-Time Gas Identification by Analyzing the Transient Response of Capillary-Attached Conductive Gas Sensor

    Directory of Open Access Journals (Sweden)

    Behzad Bahraminejad

    2010-05-01

    Full Text Available In this study, the ability of the Capillary-attached conductive gas sensor (CGS in real-time gas identification was investigated. The structure of the prototype fabricated CGS is presented. Portions were selected from the beginning of the CGS transient response including the first 11 samples to the first 100 samples. Different feature extraction and classification methods were applied on the selected portions. Validation of methods was evaluated to study the ability of an early portion of the CGS transient response in target gas (TG identification. Experimental results proved that applying extracted features from an early part of the CGS transient response along with a classifier can distinguish short-chain alcohols from each other perfectly. Decreasing time of exposition in the interaction between target gas and sensing element improved the reliability of the sensor. Classification rate was also improved and time of identification was decreased. Moreover, the results indicated the optimum interval of the early transient response of the CGS for selecting portions to achieve the best classification rates.

  18. Characterization of transient groundwater flow through a high arch dam foundation during reservoir impounding

    Directory of Open Access Journals (Sweden)

    Yifeng Chen

    2016-08-01

    Full Text Available Even though a large number of large-scale arch dams with height larger than 200 m have been built in the world, the transient groundwater flow behaviors and the seepage control effects in the dam foundations under difficult geological conditions are rarely reported. This paper presents a case study on the transient groundwater flow behaviors in the rock foundation of Jinping I double-curvature arch dam, the world's highest dam of this type to date that has been completed. Taking into account the geological settings at the site, an inverse modeling technique utilizing the time series measurements of both hydraulic head and discharge was adopted to back-calculate the permeability of the foundation rocks, which effectively improves the uniqueness and reliability of the inverse modeling results. The transient seepage flow in the dam foundation during the reservoir impounding was then modeled with a parabolic variational inequality (PVI method. The distribution of pore water pressure, the amount of leakage, and the performance of the seepage control system in the dam foundation during the entire impounding process were finally illustrated with the numerical results.

  19. Optimization of High-Resolution Continuous Flow Analysis for Transient Climate Signals in Ice Cores

    DEFF Research Database (Denmark)

    Bigler, Matthias; Svensson, Anders; Kettner, Ernesto

    2011-01-01

    Over the past two decades, continuous flow analysis (CFA) systems have been refined and widely used to measure aerosol constituents in polar and alpine ice cores in very high-depth resolution. Here we present a newly designed system consisting of sodium, ammonium, dust particles, and electrolytic...... meltwater conductivity detection modules. The system is optimized for high- resolution determination of transient signals in thin layers of deep polar ice cores. Based on standard measurements and by comparing sections of early Holocene and glacial ice from Greenland, we find that the new system features...

  20. Understanding chemical-potential-related transient pore-pressure response to improve real-time borehole (in)stability predictions

    Energy Technology Data Exchange (ETDEWEB)

    Tare, U. A.; Mody, F. K.; Mese, A. I. [Haliburton Energy Services, TX (United States)

    2002-07-01

    In order to develop a real-time wellbore (in)stability modelling capability, experimental work was carried out to investigate the role of the chemical potential of drilling fluids on transient pore pressure and time-dependent rock property alterations of shale formations. Time-dependent alterations in the pore pressure, acoustic and rock properties of formations subjected to compressive tri-axial test were recorded during the experiments involving the Pore Pressure Transmission (PPT) test. Based on the transient pore pressure of shale exposed to the test fluid presented here, the 20 per cent calcium chloride showed a very low membrane efficiency of 4.45 per cent. The need for a thorough understanding of the drilling fluid/shale interaction prior to applying any chemical potential wellbore (in)stability model to real-time drilling operations was emphasized. 9 refs., 5 figs.

  1. Transient Response of Organo-Metal-Halide Solar Cells Analyzed by Time-Resolved Current-Voltage Measurements

    Directory of Open Access Journals (Sweden)

    M. Greyson Christoforo

    2015-11-01

    Full Text Available The determination of the power conversion efficiency of solar cells based on organo-metal-halides is subject to an ongoing debate. As solar cell devices may exhibit very slow transient response, current-voltage scans in different directions may not be congruent, which is an effect often referred to as hysteresis. We here discuss time-resolved current-voltage measurements as a means to evaluate appropriate delay times (voltage settling times to be used in current-voltage measurements of solar cells. Furthermore, this method allows the analysis of transient current response to extract time constants that can be used to compare characteristic differences between devices of varying architecture types, selective contacts and changes in devices due to storage or degradation conditions.

  2. The Palomar Transient Factory: High Quality Realtime Data Processing in a Cost-Constrained Environment

    CERN Document Server

    Surace, J; Masci, F; Grillmair, C; Helou, G

    2015-01-01

    The Palomar Transient Factory (PTF) is a synoptic sky survey in operation since 2009. PTF utilizes a 7.1 square degree camera on the Palomar 48-inch Schmidt telescope to survey the sky primarily at a single wavelength (R-band) at a rate of 1000-3000 square degrees a night. The data are used to detect and study transient and moving objects such as gamma ray bursts, supernovae and asteroids, as well as variable phenomena such as quasars and Galactic stars. The data processing system at IPAC handles realtime processing and detection of transients, solar system object processing, high photometric precision processing and light curve generation, and long-term archiving and curation. This was developed under an extremely limited budget profile in an unusually agile development environment. Here we discuss the mechanics of this system and our overall development approach. Although a significant scientific installation in of itself, PTF also serves as the prototype for our next generation project, the Zwicky Transien...

  3. LEONA: Transient Luminous Event and Thunderstorm High Energy Emission Collaborative Network in Latin America

    Science.gov (United States)

    Sao Sabbas, F. T.

    2012-12-01

    This project has the goal of establishing the Collaborative Network LEONA, to study the electrodynamical coupling of the atmospheric layers signaled by Transient Luminous Events - TLEs and high energy emissions from thunderstorms. We will develop and install a remotely controlled network of cameras to perform TLE observations in different locations in South America and one neutron detector in southern Brazil. The camera network will allow building a continuous data set of the phenomena studied in this continent. The first two trial units of the camera network are already installed, in Brazil and Peru, and two more will be installed until December 2012, in Argentina and Brazil. We expect to determine the TLE geographic distribution, occurrence rate, morphology, and possible coupling with other geophysical phenomena in South America, such as the South Atlantic Magnetic Anomaly - SAMA. We also expect to study thunderstorm neutron emissions in a region of intense electrical activity, measuring neutron fluxes with high time resolution simultaneously with TLEs and lightning for the first time in South America. Using an intensified high-speed camera for TLE observation during 2 campaigns we expect to be able to determine the duration and spatial- temporal development of the TLEs observed, to study the structure and initiation of sprites and to measure the velocity of development of sprite structures and the sprite delay. The camera was acquired via the FAPESP project DEELUMINOS (2005-2010), which also nucleated our research group Atmospheric Electrodynamical Coupling - ACATMOS. LEONA will nucleate this research in other institutions in Brazil and other countries in South America, providing continuity for this important research in our region. The camera network will be an unique tool to perform consistent long term TLE observation, and in fact is the only way to accumulate a data set for a climatological study of South America, since satellite instrumentation turns off in

  4. Evaluation of intrinsic chemical kinetics and transient product spectra from time-resolved spectroscopic data.

    Science.gov (United States)

    Dioumaev, A K

    1997-09-01

    This communication is devoted to the evaluation of true spectra and intrinsic (microscopic) rate constants from apparent kinetics measured in time-resolved spectroscopic experiments monitoring complex relaxation dynamics of multi-intermediate systems. Retinal proteins, cytochrom c oxidase, phytochrome, hemoglobin, and photoactive yellow protein are examples of natural systems in which several transient states (intermediates) overlap so strongly, both in time and spectral domains, that their isolation and full characterization by classical biochemical methods is impossible, and mathematical evaluation of their true spectra and microscopic kinetic constants is required. Most of the popular methods for analysis of kinetic data, global fitting (GF), singular value decomposition (SVD), principal component analysis (PCA) and factor analysis (FA), are applicable to two-dimensional (2D, in time and spectral domains) arrays of data. All these methods produce only a phenomenological description of data, that approximates the measured data only with apparent kinetics. A fundamental limitation, namely, insufficient information in 2D data, does not allow any of these methods to reach the final goal: to recalculate from apparent to intrinsic values in any but the most trivial cases. A strategy was proposed (J.F. Nagle, Biophys. J.. 59 (1991) 476-487) to include an additional (third) information-rich dimension, temperature, into the simultaneous computer analysis. A simultaneous direct fitting of 3D data arrays to systems of differential rate equations allows recalculation of apparent kinetics into true spectra and intrinsic rate constants. In spite of its evident theoretical advantages, this strategy has not been successful on real data. Here we describe another custom-built program, SCHEMEFIT, developed for the same purpose: to fit measured kinetics directly to the system of coupled differential rate equations describing the photochrome's relaxation dynamics. Though sharing the

  5. Transient downregulation of glomerular atrial natriuretic factor receptors in high output heart failure in the rat.

    Science.gov (United States)

    Gauquelin, G; Bonhomme, M C; Garcia, R

    1995-03-01

    The renal response to exogenous atrial natriuretic factor (ANF) is blunted in chronic heart failure. The aim of the present studies was to investigate whether renal ANF receptor regulation in chronic heart failure is a time related event. Glomerular ANF receptors were analysed in radioligand binding experiments at 0, 1, 2, 6, 12, 24, and 48 h, as well as at 1, 2, 4, and 8 weeks after the induction of an aortocaval shunt. Rats with aortocaval shunts had lower packed cell volume and body weight and higher relative heart weight than sham operated controls. Plasma ANF C and N terminal levels were increased in shunt rats as early as 5 min after establishment of the shunt. Right and left atrial ANF concentrations were decreased and ventricular ANF concentration was increased in shunt rats at 6 and 12 h respectively. Competitive inhibition of 125I-ANF binding showed that at 6 h the density (Bmax) of glomerular ANF receptors was significantly lower than in the controls [518(SEM 10) v 759(12) fmol.mg-1 protein] without differences in their affinity (Kd). The low Bmax in shunt animals persisted at 12, 24, and 48 h, even at 1 week [Bmax: 400(29) and 713(28) fmol.mg-1 protein; Kd: 80(2) and 70(4) pM, for AC rats and controls, respectively]. Bmax values were not significantly different at 2, 4, and 8 weeks. In 24 h animals, C-ANF displaced 65% of total binding, with both total and C ANF binding sites being 38% lower in shunt animals. Downregulation of glomerular ANF receptors is a transient event during the development of high output heart failure in the rat. Thus the blunted renal response to ANF during chronic heart failure is not likely to be due to a decrease in renal ANF receptor density or affinity.

  6. Wavelength-Dependent Transient Characteristics Caused by Gain Saturation in Highly Nonlinear Fiber-Based Raman Amplifiers

    Institute of Scientific and Technical Information of China (English)

    Shinobu; Tamaoki; Tetsufumi; Tsuzaki; Motoki; Kakui; Masayuki; Shigematsu

    2003-01-01

    We have investigated the transient characteristics of discrete Raman Amplifiers and found that the response time caused by gain saturation is dependent upon the wavelength, which corresponds to the effective length of the pump light.

  7. Multi-time scaling based modeling of transient electro-magnetic fields in vibrating media with antenna applications

    Science.gov (United States)

    Yaghmaie, Reza; Ghosh, Somnath

    2017-07-01

    This paper develops an accurate and efficient finite element model for simulating coupled transient electromagnetic and dynamic mechanical fields that differ widely in the frequency ranges. This coupled modeling framework is necessary for effective modeling and simulation of structures such as antennae that are governed by multi-physics problems operating in different frequency and temporal regimes. A key development is the wavelet transformation induced multi-time scaling or WATMUS method that is designed to overcome shortcomings of modeling coupled multi-physics problems that are governed by disparate frequencies. The WATMUS-based FE model is enhanced in this paper with a scaled and preconditioned Newton-GMRES solver for efficient solution. Results from the WATMUS-based FE model show the accuracy and highly improved computational efficiency in comparison with single time-scale methods. The coupled FE model is used to solve two different antenna problems with large electromagnetic to mechanical frequency ratios. The examples considered are a monopole antenna and a microstrip patch antenna. Comparing the electromagnetic fields with the progression of mechanical cycles demonstrate complex multi-physics relations in these applications.

  8. The High Time Resolution Radio Sky

    Science.gov (United States)

    Thornton, D.

    2013-11-01

    Pulsars are laboratories for extreme physics unachievable on Earth. As individual sources and possible orbital companions can be used to study magnetospheric, emission, and superfluid physics, general relativistic effects, and stellar and binary evolution. As populations they exhibit a wide range of sub-types, with parameters varying by many orders of magnitude signifying fundamental differences in their evolutionary history and potential uses. There are currently around 2200 known pulsars in the Milky Way, the Magellanic clouds, and globular clusters, most of which have been discovered with radio survey observations. These observations, as well as being suitable for detecting the repeating signals from pulsars, are well suited for identifying other transient astronomical radio bursts that last just a few milliseconds that either singular in nature, or rarely repeating. Prior to the work of this thesis non-repeating radio transients at extragalactic distances had possibly been discovered, however with just one example status a real astronomical sources was in doubt. Finding more of these sources was a vital to proving they were real and to open up the universe for millisecond-duration radio astronomy. The High Time Resolution Universe survey uses the multibeam receiver on the 64-m Parkes radio telescope to search the whole visible sky for pulsars and transients. The temporal and spectral resolution of the receiver and the digital back-end enable the detection of relatively faint, and distant radio sources. From the Parkes telescope a large portion of the Galactic plane can be seen, a rich hunting ground for radio pulsars of all types, while previously poorly surveyed regions away from the Galactic plane are also covered. I have made a number of pulsar discoveries in the survey, including some rare systems. These include PSR J1226-6208, a possible double neutron star system in a remarkably circular orbit, PSR J1431-471 which is being eclipsed by its companion with

  9. Phosphorylation of tau protein over time in rats subjected to transient brain ischemia

    Institute of Scientific and Technical Information of China (English)

    Bo Song; Qiang Ao; Zhen Wang; Weiqiang Liu; Ying Niu; Qin Shen; Huancong Zuo; Xiufang Zhang; Yandao Gong

    2013-01-01

    Transient brain ischemia has been shown to induce hyperphosphorylation of the microtu-bule-associated protein tau. To further determine the mechanisms underlying these processes, we investigated the interaction between tau, glycogen synthase kinase (GSK)-3β and protein phos-phatase 2A. The results confirmed that tau protein was dephosphorylated during brain ischemia;in addition, the activity of GSK-3βwas increased and the activity of protein phosphatase 2A was de-creased. After reperfusion, tau protein was hyperphosphorylated, the activity of GSK-3β was de-creased and the activity of protein phosphatase 2A remained low. Importantly, the interaction of tau with GSK-3β and protein phosphatase 2A was altered during ischemia and reperfusion. Lithium chloride could affect tau phosphorylation by regulating the interaction of tau with GSK-3βand pro-tein phosphatase 2A, and improve learning and memory ability of rats after transient brain ischemia. The present study demonstrated that it was the interaction of tau with GSK-3β and protein phos-phatase 2A, rather than their individual activities, that dominates the phosphorylation of tau in tran-sient brain ischemia. Hyperphosphorylated tau protein may play an important role in the evolution of brain injury in ischemic stroke. The neuroprotective effects of lithium chloride partly depend on the inhibition of tau phosphorylation during transient brain ischemia.

  10. Transient Stability Analysis of Grid-connected Wind Turbines with Time Domain Simulation

    Directory of Open Access Journals (Sweden)

    Shuaibing Li

    2013-07-01

    Full Text Available With an ever-increasing pentration of wind power into power system, the influence to overall system behavior and stability becomes obviously. Therefore, it is so necessary to require wind turbines have good grid adaptability. This paper investigates the effect of directly grid-connected front-end speed controlled wind turbines (FSCWT on transient stability of power system.For this purpose, a voltage based synchronous generator model is used and the drive train model with WinDriver is built. By using a fast excitation control of FSCWT exciter, the FSCWT wind turbines can successfully ride through grid fault and have no problem of angular stability when connected to grid. Simulation studies are carried out to demonstrate and compare the transient performance of the IEEE 5-machine 14-bus system with FSCWT replace by double fed induction generators (DFIG during a three phase fault. Results show that a better transient stability performance is achieved with an intergration of FSCWT in comparsion with DFIG, which can even bring some benefits on power system transient performance and stability.

  11. Real-time calibration of the AARTFAAC array for transient detection

    NARCIS (Netherlands)

    Prasad, P.; Wijnholds, S.J.; Huizinga, F.; Wijers, R.A.M.J.

    2014-01-01

    The search for transient phenomena at low radio frequencies is now coming of age with the development of radio sky monitors with a large field of view, which are made feasible by new developments in calibration algorithms and computing. However, accurate calibration of such arrays is challenging, es

  12. High-Frequency Properties of Ultracool Dwarf Star Radio Transients, or The Little Dwarfs that Could

    Science.gov (United States)

    Ravi, Vikram; Hobbs, George; Keith, Michael; Champion, David; Ferrario, Lilia; Wickramasinghe, Dayal

    2009-07-01

    Radio transients are among the most intriguing phenomena in astronomy. Numerous flaring events, some periodic, have lately surfaced, with only few identified with known objects such as magnetic stars. Periodic, non-thermal, highly circularly-polarised pulses and unusually strong quiescence have been recently detected from three late-type quickly-rotating (~2hr periods) ultracool dwarf stars (>M7) at centimetric wavelengths. This violates empirical relations and quantifiers of dwarf-star surface activity. Measurements of dwarf-star kiloGauss magnetic fields have led to emission models based on dipole fields and incoherent gyrosynchrotron or coherent electron-cyclotron maser mechanisms. We propose to observe two such similar objects at 1cm and 7mm (LP944-20 and DENIS1048-3956) that are known to flare but without detected periodicities. No observations of high-frequency emission from any magnetic star have been published. The broadband capabilities of CABB will provide extraordinary frequency-synthesised sensitivity in a search for periodicity. The obtained spectral indices, along with possible high-frequency spectral cut-offs, will greatly help constrain emission models of magnetic stars. This is the first attempt to characterise the high-frequency transient radio sky, a key science project for future telescopes such as ASKAP and the SKA.

  13. Rapid transient production in plants by replicating and non-replicating vectors yields high quality functional anti-HIV antibody

    National Research Council Canada - National Science Library

    Sainsbury, Frank; Sack, Markus; Stadlmann, Johannes; Quendler, Heribert; Fischer, Rainer; Lomonossoff, George P

    2010-01-01

    .... To assess the quality of antibodies transiently expressed to high levels in plants, we have expressed and characterised the human anti-HIV monoclonal antibody, 2G12, using both replicating and non...

  14. Determining the mobility of ions by transient current measurements at high voltages.

    Science.gov (United States)

    Kohn, Peter; Schröter, Klaus; Thurn-Albrecht, Thomas

    2007-08-24

    We present polarization and transient current experiments that allow an independent determination of the charge carrier density and the mobility of ions in polymer electrolytes at low charge carrier density. The method relies on a complete depletion of ions in the bulk electrolyte achieved by applying high voltages. Based on a qualitative model for the charge dynamics in this nonlinear regime, the method is exemplarily applied to a system of polymethylmethacrylate doped with small amounts of a lithium salt. The independently obtained values for the ionic mobility, the charge carrier density, and the conductivity are consistent for all salt concentrations studied. Criteria for the applicability of the method are discussed.

  15. Optimization of High-Resolution Continuous Flow Analysis for Transient Climate Signals in Ice Cores

    DEFF Research Database (Denmark)

    Bigler, Matthias; Svensson, Anders; Kettner, Ernesto

    2011-01-01

    meltwater conductivity detection modules. The system is optimized for high- resolution determination of transient signals in thin layers of deep polar ice cores. Based on standard measurements and by comparing sections of early Holocene and glacial ice from Greenland, we find that the new system features...... a depth resolution in the ice of a few millimeters which is considerably better than other CFA systems. Thus, the new system can resolve ice strata down to 10 mm thickness and has the potential of identifying annual layers in both Greenland and Antarctic ice cores throughout the last glacial cycle....

  16. Transient and sustained BOLD signal time courses affect the detection of emotion-related brain activation in fMRI.

    Science.gov (United States)

    Paret, Christian; Kluetsch, Rosemarie; Ruf, Matthias; Demirakca, Traute; Kalisch, Raffael; Schmahl, Christian; Ende, Gabriele

    2014-12-01

    A tremendous amount of effort has been dedicated to unravel the functional neuroanatomy of the processing and regulation of emotion, resulting in a well-described picture of limbic, para-limbic and prefrontal regions involved. Studies applying functional magnetic resonance imaging (fMRI) often use the block-wise presentation of stimuli with affective content, and conventionally model brain activation as a function of stimulus or task duration. However, there is increasing evidence that regional brain responses may not always translate to task duration and rather show stimulus onset-related transient time courses. We assume that brain regions showing transient responses cannot be detected in block designs using a conventional fMRI analysis approach. At the same time, the probability of detecting these regions with conventional analyses may be increased when shorter stimulus timing or a more intense stimulation during a block is used. In a within-subject fMRI study, we presented aversive pictures to 20 healthy subjects and investigated the effect of experimental design (i.e. event-related and block design) on the detection of brain activation in limbic and para-limbic regions of interest of emotion processing. In addition to conventional modeling of sustained activation during blocks of stimulus presentation, we included a second response function into the general linear model (GLM), suited to detect transient time courses at block onset. In the conventional analysis, several regions like the amygdala, thalamus and periaqueductal gray were activated irrespective of design. However, we found a positive BOLD response in the anterior insula (AI) in event-related but not in block-design analyses. GLM analyses suggest that this difference may result from a transient response pattern which cannot be captured by the conventional fMRI analysis approach. Our results indicate that regions with a transient response profile like the AI can be missed in block designs if analyses

  17. Time of flight MR angiography assessment casts doubt on the association between transient global amnesia and intracranial jugular venous reflux

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Yeonah; Kim, Eunhee; Kim, Jae Hyoung; Choi, Byung Se; Jung, Cheolkyu; Bae, Yun Jung; Lee, Kyung Mi [Seoul National University College of Medicine, Seoul National University Bundang Hospital, Department of Radiology, Seongnam-si, Gyeonggi-do (Korea, Republic of); Lee, Dong Hoon [Seoul Medical Center, Department of Radiology, Seoul (Korea, Republic of)

    2014-10-03

    Evidence of intracranial venous reflux flow due to jugular venous reflux (JVR) on time of flight (TOF) MR angiography (MRA) is thought to be highly associated with transient global amnesia (TGA) - evidence that supports the venous congestion theory of TGA pathophysiology. However, recent studies indicate that intracranial JVR on TOF MRA is occasionally observed in normal elderly. Therefore, the purpose of this study was to compare the prevalence of intracranial JVR on TOF MRA in patients with TGA and two control groups. Three age- and sex-matched groups of subjects that received MRI and MRA were enrolled. The groups comprised 167 patients with TGA, 167 visitors to the emergency room (ER) and 167 visitors to a health promotion centre (HPC). Intracranial JVR was defined as abnormal venous signals in the inferior petrosal, sigmoid and/or transverse sinuses on TOF MRA. The prevalence of intracranial JVR was assessed across the three groups. Intracranial JVR was seen in seven (4.2 %) TGA patients, eight (4.8 %) ER visitors and three (1.8 %) HPC visitors, respectively. No statistically significant differences were observed among the three groups. TGA patients showed a low prevalence of intracranial JVR on TOF MRA, and no statistical differences were found in comparison with control groups. (orig.)

  18. High photovoltage in perovskite solar cells: New physical insights from the ultrafast transient absorption spectroscopy

    Science.gov (United States)

    Dar, M. Ibrahim; Franckevičius, Marius; Arora, Neha; Redeckas, Kipras; Vengris, Mikas; Gulbinas, Vidmantas; Zakeeruddin, Shaik Mohammed; Grätzel, Michael

    2017-09-01

    To understand the cause of the high open circuit photovoltage (VOC) achieved by todays' state of the art perovskite solar cells (PSCs), we examine formamidinium lead bromide CH(NH2)2PbBr3 films by ultrafast transient absorption spectroscopy (TAS). By using TiO2 and spiro-OMeTAD as charge extraction layers, the devices based on the CH(NH2)2PbBr3 films yield VOC as high as 1.5 V ascertaining their high quality. TAS establish that the presence of charge extraction layers has very little influences on the nature of a negative band at 535 nm corresponding to the bleaching of the absorption band edge and two positive bands in the CH(NH2)2PbBr3 films. Therefore, we contend that the VOC in PSC is predominantly determined by the quasi Fermi level splitting within the perovskite layer.

  19. On high-continuity transfinite element formulations for linear-nonlinear transient thermal problems

    Science.gov (United States)

    Tamma, Kumar K.; Railkar, Sudhir B.

    1987-01-01

    This paper describes recent developments in the applicability of a hybrid transfinite element methodology with emphasis on high-continuity formulations for linear/nonlinear transient thermal problems. The proposed concepts furnish accurate temperature distributions and temperature gradients making use of a relatively smaller number of degrees of freedom; and the methodology is applicable to linear/nonlinear thermal problems. Characteristic features of the formulations are described in technical detail as the proposed hybrid approach combines the major advantages and modeling features of high-continuity thermal finite elements in conjunction with transform methods and classical Galerkin schemes. Several numerical test problems are evaluated and the results obtained validate the proposed concepts for linear/nonlinear thermal problems.

  20. A radiation belt monitor for the High Energy Transient Experiment Satellite

    Science.gov (United States)

    Lo, D. H.; Wenzel, K. W.; Petrasso, R. D.; Prigozhin, G. Y.; Doty, J.; Ricker, G.

    1993-01-01

    A Radiation Belt Monitor (RBM) sensitive to protons and electrons with energy approximately greater than 0.5 MeV has been designed for the High Energy Transient Experiment (HETE) satellite in order to: first, control the on-off configuration of the experiments (i.e. those susceptible to proton damage); and second, to indicate the presence of proton and/or electron events that could masquerade as legitimate high energy photon events. One of the two RBM channels has an enhanced sensitivity to electrons. Each channel of the RBM, based on a PIN silicon diode, requires a typical power of 6 milliwatts. Tests have been performed with protons with energies from approximately 0.1 to 2.5 MeV (generated by a Cockcroft-Walton linear accelerator via the d(d,p)t reaction), and with electrons with energies up to 1 MeV (from a 1.0 microcurie Bi-207 source).

  1. Research on High Frequency Amplitude Attenuation of Electric Fast Transient Generator

    Directory of Open Access Journals (Sweden)

    Huafu Zhang

    2013-01-01

    Full Text Available In order to solve the amplitude attenuation of electric fast transient (EFT generator operating in high frequency, the charging and discharging process of energy storage capacitor in EFT generator are analyzed, the main circuit voltage variation mathematical model is established, the parameters of main loop circuit and the parameters of switch driving waveform which affect burst amplitude are discussed. Through the simulation, this paper puts forward effective methods to overcome burst amplitude attenuation in high frequency. The simulation results show that when the frequency is low, the duty ratio of drive signal have little effect on energy storage capacitor voltage amplitude attenuation. when the charging resistance is less than 500 Ω, the duty ratio of drive signal is less than 0.125, the repetition frequency of burst reaches 1.2 MHz, the amplitude attenuation of energy storage capacitor voltage is less than 9%, the amplitude of burst satisfies IEC61000-4-4 standards.

  2. Optimization of high-resolution continuous flow analysis for transient climate signals in ice cores.

    Science.gov (United States)

    Bigler, Matthias; Svensson, Anders; Kettner, Ernesto; Vallelonga, Paul; Nielsen, Maibritt E; Steffensen, Jørgen Peder

    2011-05-15

    Over the past two decades, continuous flow analysis (CFA) systems have been refined and widely used to measure aerosol constituents in polar and alpine ice cores in very high-depth resolution. Here we present a newly designed system consisting of sodium, ammonium, dust particles, and electrolytic meltwater conductivity detection modules. The system is optimized for high-resolution determination of transient signals in thin layers of deep polar ice cores. Based on standard measurements and by comparing sections of early Holocene and glacial ice from Greenland, we find that the new system features a depth resolution in the ice of a few millimeters which is considerably better than other CFA systems. Thus, the new system can resolve ice strata down to 10 mm thickness and has the potential of identifying annual layers in both Greenland and Antarctic ice cores throughout the last glacial cycle.

  3. Highly Stable Operation of Lithium Metal Batteries Enabled by the Formation of a Transient High Concentration Electrolyte Layer

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Jianming; Yan, Pengfei; Mei, Donghai; Engelhard, Mark H.; Cartmell, Samuel S.; Polzin, Bryant; Wang, Chong M.; Zhang, Jiguang; Xu, Wu

    2016-02-08

    Lithium (Li) metal has been extensively investigated as an anode for rechargeable battery applications due to its ultrahigh specific capacity and the lowest redox potential. However, significant challenges including dendrite growth and low Coulombic efficiency are still hindering the practical applications of rechargeable Li metal batteries. Here, we demonstrate that long-term cycling of Li metal batteries can be realized by the formation of a transient high concentration electrolyte layer near the surface of Li metal anode during high rate discharge process. The highly concentrated Li+ ions in this transient layer will immediately solvate with the available solvent molecules and facilitate the formation of a stable and flexible SEI layer composed of a poly(ethylene carbonate) framework integrated with other organic/inorganic lithium salts. This SEI layer largely suppresses the corrosion of Li metal anode by free organic solvents and enables the long-term operation of Li metal batteries. The fundamental findings in this work provide a new direction for the development and operation of Li metal batteries that could be operated at high current densities for a wide range of applications.

  4. Anomalous transient uplift observed at the Lop Nor, China nuclear test site using satellite radar interferometry time-series analysis

    Science.gov (United States)

    Vincent, P.; Buckley, S. M.; Yang, D.; Carle, S. F.

    2011-12-01

    Anomalous uplift is observed at the Lop Nor, China nuclear test site using ERS satellite SAR data. Using an InSAR time-series analysis method, we show that an increase in absolute uplift with time is observed between 1997 and 1999. The signal is collocated with past underground nuclear tests. Due to the collocation in space with past underground tests we postulate a nuclear test-related hydrothermal source for the uplift signal. A possible mechanism is presented that can account for the observed transient uplift and is consistent with documented thermal regimes associated with underground nuclear tests conducted at the Nevada National Security Site (NNSS) (formerly the Nevada Test Site).

  5. Simulation of time-dependent pool shape during laser spot welding: Transient effects

    Science.gov (United States)

    Ehlen, Georg; Ludwig, Andreas; Sahm, Peter R.

    2003-12-01

    The shape and depth of the area molten during a welding process is of immense technical importance. This study investigates how the melt pool shape during laser welding is influenced by Marangoni convection and tries to establish general qualitative rules of melt pool dynamics. A parameter study shows how different welding powers lead to extremely different pool shapes. Special attention is paid to transient effects that occur during the melting process as well as after switching off the laser source. It is shown that the final pool shape can depend strongly on the welding duration. The authors use an axisymmetric two-dimensional (2-D) control-volume-method (CVM) code based on the volume-averaged two-phase model of alloy solidification by Ni and Beckermann[1] and the SIMPLER algorithm by Patankar.[2] They calculate the transient distribution of temperatures, phase fractions, flow velocities, pressures, and concentrations of alloying elements in the melt and two solid phases (peritectic solidification) for a stationary laser welding process. Marangoni flow is described using a semiempirical model for the temperature-dependent surface tension gradient. The software was parallelized using the shared memory standard OpenMP.

  6. RACLETTE: a model for evaluating the thermal response of plasma facing components to slow high power plasma transients. Part I: Theory and description of model capabilities

    Science.gov (United States)

    Raffray, A. René; Federici, Gianfranco

    1997-04-01

    RACLETTE (Rate Analysis Code for pLasma Energy Transfer Transient Evaluation), a comprehensive but relatively simple and versatile model, was developed to help in the design analysis of plasma facing components (PFCs) under 'slow' high power transients, such as those associated with plasma vertical displacement events. The model includes all the key surface heat transfer processes such as evaporation, melting, and radiation, and their interaction with the PFC block thermal response and the coolant behaviour. This paper represents part I of two sister and complementary papers. It covers the model description, calibration and validation, and presents a number of parametric analyses shedding light on and identifying trends in the PFC armour block response to high plasma energy deposition transients. Parameters investigated include the plasma energy density and deposition time, the armour thickness and the presence of vapour shielding effects. Part II of the paper focuses on specific design analyses of ITER plasma facing components (divertor, limiter, primary first wall and baffle), including improvements in the thermal-hydraulic modeling required for better understanding the consequences of high energy deposition transients in particular for the ITER limiter case.

  7. Transient Thermal Tensile Behaviour of Novel Pitch-Based Ultra-High Modulus CFRP Tendons

    Directory of Open Access Journals (Sweden)

    Giovanni Pietro Terrasi

    2016-12-01

    Full Text Available A novel ultra-high modulus carbon fibre reinforced polymer (CFRP prestressing tendon made from coal tar pitch-based carbon fibres was characterized in terms of high temperature tensile strength (up to 570 °C with a series of transient thermal and steady state temperature tensile tests. Digital image correlation was used to capture the high temperature strain development during thermal and mechanical loading. Complementary thermogravimetric (TGA and dynamic mechanical thermal (DMTA experiments were performed on the tendons to elucidate their high temperature thermal and mechanical behaviour. The novel CFRP tendons investigated in the present study showed an ambient temperature design tensile strength of 1400 MPa. Their failure temperature at a sustained prestress level of 50% of the design tensile strength was 409 °C, which is higher than the failure temperature of most fibre reinforced polymer rebars used in civil engineering applications at similar utilisation levels. This high-temperature tensile strength shows that there is potential to use the novel high modulus CFRP tendons in CFRP pretensioned concrete elements for building applications that fulfill the fire resistance criteria typically applied within the construction industry.

  8. [A hydroponic cultivation system for rapid high-yield transient protein expression in Nicotiana plants under laboratory conditions].

    Science.gov (United States)

    Mo, Qianzhen; Mai, Rongjia; Yang, Zhixiao; Chen, Minfang; Yang, Tiezhao; Lai, Huafang; Yang, Peiliang; Chen, Qiang; Zhou, Xiaohong

    2012-06-01

    To develop a hydroponic Nicotiana cultivation system for rapid and high-yield transient expression of recombinant proteins under laboratory conditions. To establish the hydroponic cultivation system, several parameters were examined to define the optimal conditions for the expression of recombinant proteins in plants. We used the green fluorescent protein (GFP) and the geminiviral plant transient expression vector as the model protein/expression vector. We examined the impact of Nicotiana species, the density and time of Agrobacterium infiltration, and the post-infiltration growth period on the accumulation of GFP. The expression levels of GFP in Nicotiana leaves were then examined by Western blotting and ELISA. Our data indicated that a hydroponic Nicotiana cultivation system with a light intensity of 9000 LX/layer, a light cycle of 16 h day/8 h night, a temperature regime of 28 degrees celsius; day/21 degrees celsius; night, and a relative humidity of 80% could support the optimal plant growth and protein expression. After agroinfiltration with pBYGFPDsRed.R/LBA4404, high levels of GFP expression were observed in both N. benthamiana and N. tobaccum (cv. Yuyan No.5) plants cultured with this hydroponic cultivation system. An optimal GFP expression was achieved in both Nicotiana species leaves 4 days after infiltration by Agrobacterium with an OD(600) of 0.8. At a given time point, the average biomass of N. tobaccum (cv. Yuyan No.5) was significantly higher than that of N. benthamiana. The leaves from 6-week-old N. benthamiana plants and 5-week-old N. tobaccum (cv. Yuyan No.5) plants could be the optimal material for agroinfiltration. We have established a hydroponic cultivation system that allows robust growth of N. benthamiana and N. tobaccum (cv. Yuyan No.5) plants and the optimal GFP expression in the artificial climate box.

  9. Comprehensive transient-state study for CARMENES-NIR high thermal stability

    CERN Document Server

    Becerril, S; Cárdenas, M C; Rabaza, O; Ramón, A; Abril, M; Costillo, L P; Morales, R; Rodríguez, A; Amado, P J

    2010-01-01

    CARMENES has been proposed as a next-generation instrument for the 3.5m Calar Alto Telescope. Its objective is finding habitable exoplanets around M dwarfs through radial velocity measurements (m/s level) in the near-infrared. Consequently, the NIR spectrograph is highly constraint regarding thermal/mechanical requirements. As a first approach, the thermal stability has been limited to \\pm 0.01K (within year period) over a working temperature of 243K. This can be achieved by means of several temperature-controlled rooms. The options considered to minimise the complexity of the thermal design are here presented, as well as the transient-state thermal analyses realised to make the best choice.

  10. Biofiltration of xylene using wood charcoal as the biofilter media under transient and high loading conditions.

    Science.gov (United States)

    Singh, Kiran; Giri, B S; Sahi, Amrita; Geed, S R; Kureel, M K; Singh, Sanjay; Dubey, S K; Rai, B N; Kumar, Surendra; Upadhyay, S N; Singh, R S

    2017-10-01

    The main objective of this study was to evaluate the performance of wood charcoal as biofilter media under transient and high loading condition. Biofiltration of xylene was investigated for 150days in a laboratory scale unit packed with wood charcoal and inoculated with mixed microbial culture at the xylene loading rates ranged from 12 to 553gm(-3)h(-1). The kinetic analysis of the xylene revealed absence of substrate inhibition and possibility of achieving higher elimination under optimum condition. The pH, temperature, pressure drop and CO2 production rate were regularly monitored during the experiments. Throughout experimental period, the removal efficiency (RE) was found to be in the range of 65-98.7% and the maximum elimination capacity (EC) was 405.7gm(-3)h(-1). Molecular characterization results show Bacillus sp. as dominating microbial group in the biofilm. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Immediate transient thrombocytopenia at the time of alemtuzumab infusion in multiple sclerosis.

    Science.gov (United States)

    Ranganathan, Usha; Kaunzner, Ulrike; Foster, Stacyann; Vartanian, Timothy; Perumal, Jai S

    2017-03-01

    Alemtuzumab is a monoclonal antibody approved for relapsing-remitting multiple sclerosis (RRMS). Although Immune thrombocytopenia (ITP) has been reported as a secondary autoimmune phenomenon following alemtuzumab infusion, immediate thrombocytopenia during the infusion has not been reported. We report transient, reversible, self-limiting acute-onset thrombocytopenia during the first course with alemtuzumab. In total, 3 of 22 paitents developed mild self-limited bruising associated with a drop in platelet count from their baseline during the intial 5-day course of alemtuzumab. Upon chart review, all 22 patients who received alemtuzumab developed an immediate mostly asymptomatic drop in platelet count which returned to normal within 2 months post-infusion.

  12. Plasma structure within poleward-moving cusp/cleft auroral transients: EISCAT Svalbard radar observations and an explanation in terms of large local time extent of events

    Directory of Open Access Journals (Sweden)

    M. Lockwood

    Full Text Available We report high-resolution observations of the southward-IMF cusp/cleft ionosphere made on December 16th 1998 by the EISCAT (European incoherent scatter Svalbard radar (ESR, and compare them with observations of dayside auroral luminosity, as seen at a wavelength of 630 nm by a meridian scanning photometer at Ny Ålesund, and of plasma flows, as seen by the CUTLASS (co-operative UK twin location auroral sounding system Finland HF radar. The optical data reveal a series of poleward-moving transient red-line (630 nm enhancements, events that have been associated with bursts in the rate of magnetopause reconnection generating new open flux. The combined observations at this time have strong similarities to predictions of the effects of soft electron precipitation modulated by pulsed reconnection, as made by Davis and Lockwood (1996; however, the effects of rapid zonal flow in the ionosphere, caused by the magnetic curvature force on the newly opened field lines, are found to be a significant additional factor. In particular, it is shown how enhanced plasma loss rates induced by the rapid convection can explain two outstanding anomalies of the 630 nm transients, namely how minima in luminosity form between the poleward-moving events and how events can re-brighten as they move poleward. The observations show how cusp/cleft aurora and transient poleward-moving auroral forms appear in the ESR data and the conditions which cause enhanced 630 nm emission in the transients: they are an important first step in enabling the ESR to identify these features away from the winter solstice when supporting auroral observations are not available.

    Key words: Ionosphere (polar ionosphere - Magnetospheric physics (magnetopause; cusp and boundary layers; solar wind-magnetosphere interactions

  13. Comparative Study of Time-Frequency Decomposition Techniques for Fault Detection in Induction Motors Using Vibration Analysis during Startup Transient

    Directory of Open Access Journals (Sweden)

    Paulo Antonio Delgado-Arredondo

    2015-01-01

    Full Text Available Induction motors are critical components for most industries and the condition monitoring has become necessary to detect faults. There are several techniques for fault diagnosis of induction motors and analyzing the startup transient vibration signals is not as widely used as other techniques like motor current signature analysis. Vibration analysis gives a fault diagnosis focused on the location of spectral components associated with faults. Therefore, this paper presents a comparative study of different time-frequency analysis methodologies that can be used for detecting faults in induction motors analyzing vibration signals during the startup transient. The studied methodologies are the time-frequency distribution of Gabor (TFDG, the time-frequency Morlet scalogram (TFMS, multiple signal classification (MUSIC, and fast Fourier transform (FFT. The analyzed vibration signals are one broken rotor bar, two broken bars, unbalance, and bearing defects. The obtained results have shown the feasibility of detecting faults in induction motors using the time-frequency spectral analysis applied to vibration signals, and the proposed methodology is applicable when it does not have current signals and only has vibration signals. Also, the methodology has applications in motors that are not fed directly to the supply line, in such cases the analysis of current signals is not recommended due to poor current signal quality.

  14. A real-time de-noising method applied for transient and weak biomolecular interaction analysis in surface plasmon resonance biosensing

    Science.gov (United States)

    Zhan, Shuyue; Shi, Chunfei; Ou, Huichao; Song, Hong; Wang, Xiaoping

    2016-03-01

    Surface plasmon resonance (SPR) biosensing technology will likely become a type of label-free technology for transient and weak biomolecular interaction analysis (BIA); however, it needs some improvement with regard to high-speed and high-resolution measurement. We studied a type of real-time de-noising (RD) data processing method for SPR sensorgrams based on moving average; it can immediately distinguish ultra-weak signals during the process of experiment, and can display a low-noise sensorgram in real time. A flow injection analysis experiment and a CM5 sensorchip affinity experiment are designed to evaluate the characteristics of the RD method. High noise suppression ability and low signal distortion risks of the RD method have been proved. The RD method does not significantly distort signals of the sensorgram in the molecular affinity experiment, and K D values of the RD method essentially coincide with those of the raw sensorgram with a higher signal-to-noise ratio (SNR). Meanwhile, by the RD method denoising the sensorgram with an ultralow SNR that is closer to the condition of the transient and weak molecular interactions, the kinetic constant can be more accurately analyzed, whereas it cannot be realized for the raw sensorgram. The crucial function and significance of the RD method are primarily embodied in the measurement limit of SPR sensing.

  15. Modeling the time-dependent transient radiation response of semiconductor junctions

    Science.gov (United States)

    Wunsch, T. F.; Axness, C. L.

    1992-12-01

    Analytical one-dimensional time-dependent photocurrent models are developed from new solutions to the ambipolar transport equation. The p-n junction model incorporates the effects of an electric field in the quasi-neutral region, finite diode length, and an arbitrary generation function g = f(x,t). It provides improved accuracy over the Wirth-Rogers and Enlow-Alexander models. An approximate photocurrent solution for p-n-n(+), n-p-p(+), and p-i-n diode junctions is developed considering high-injection effects. Comparison with experimental data shows that a single set of physical parameters is adequate to characterize the model with respect to dose rate, pulse width, and geometry.

  16. Analytical Determination of the Attack Transient in a Clarinet With Time-Varying Blowing Pressure

    CERN Document Server

    Almeida, A; Vergez, C; Gazengel, B

    2015-01-01

    This article uses a basic model of a reed instrument , known as the lossless Raman model, to determine analytically the envelope of the sound produced by the clarinet when the mouth pressure is increased gradually to start a note from silence. Using results from dynamic bifur-cation theory, a prediction of the amplitude of the sound as a function of time is given based on a few parameters quantifying the time evolution of mouth pressure. As in previous uses of this model, the predictions are expected to be qualitatively consistent with simulations using the Raman model, and observations of real instruments. Model simulations for slowly variable parameters require very high precisions of computation. Similarly, any real system, even if close to the model would be affected by noise. In order to describe the influence of noise, a modified model is developed that includes a stochastic variation of the parameters. Both ideal and stochastic models are shown to attain a minimal amplitude at the static oscillation th...

  17. Transient-Free Operations With Physics-Based Real-time Analysis and Control

    Science.gov (United States)

    Kolemen, Egemen; Burrell, Keith; Eggert, William; Eldon, David; Ferron, John; Glasser, Alex; Humphreys, David

    2016-10-01

    In order to understand and predict disruptions, the two most common methods currently employed in tokamak analysis are the time-consuming ``kinetic EFITs,'' which are done offline with significant human involvement, and the search for correlations with global precursors using various parameterization techniques. We are developing automated ``kinetic EFITs'' at DIII-D to enable calculation of the stability as the plasma evolves close to the disruption. This allows us to quantify the probabilistic nature of the stability calculations and provides a stability metric for all possible linear perturbations to the plasma. This study also provides insight into how the control system can avoid the unstable operating space, which is critical for high-performance operations close to stability thresholds at ITER. A novel, efficient ideal stability calculation method and new real-time CER acquisition system are being developed, and a new 77-core server has been installed on the DIII-D PCS to enable experimental use. Sponsored by US DOE under DE-SC0015878 and DE-FC02-04ER54698.

  18. Highly ionized disc and transient outflows in the Seyfert galaxy IRAS 18325-5926

    CERN Document Server

    Iwasawa, K; Kara, E; Reynolds, C S; Miniutti, G; Tombesi, F

    2016-01-01

    We report on strong X-ray variability and the Fe K band spectrum of the Seyfert galaxy IRAS 18325-5926 obtained from the 2001 XMM-Newton EPIC pn observation of a 120 ks duration. While the X-ray source is highly variable, the 8-10 keV band shows larger variability than that of the lower energies. Amplified 8-10 keV flux variations are associated with two prominent flares of the X-ray source during the observation. The Fe K emission is peaked at 6.6 keV with moderate broadening. It is likely to originate from a highly ionized disc with the ionization parameter of log xi ~3. The Fe K line flux responds to the major flare, supporting its disc origin. There is a short burst of the Fe line flux with no relation to the continuum brightness for which we have no clear explanation. We also find transient, blueshifted Fe K absorption features, which can be identified with high-velocity (~0.2 c) outflows of highly ionized gas, as found in other active galaxies. The deepest absorption feature appears only briefly (~1 hr)...

  19. An Improved High-Sensitivity Airborne Transient Electromagnetic Sensor for Deep Penetration.

    Science.gov (United States)

    Chen, Shudong; Guo, Shuxu; Wang, Haofeng; He, Miao; Liu, Xiaoyan; Qiu, Yu; Zhang, Shuang; Yuan, Zhiwen; Zhang, Haiyang; Fang, Dong; Zhu, Jun

    2017-01-17

    The investigation depth of transient electromagnetic sensors can be effectively increased by reducing the system noise, which is mainly composed of sensor internal noise, electromagnetic interference (EMI), and environmental noise, etc. A high-sensitivity airborne transient electromagnetic (AEM) sensor with low sensor internal noise and good shielding effectiveness is of great importance for deep penetration. In this article, the design and optimization of such an AEM sensor is described in detail. To reduce sensor internal noise, a noise model with both a damping resistor and a preamplifier is established and analyzed. The results indicate that a sensor with a large diameter, low resonant frequency, and low sampling rate will have lower sensor internal noise. To improve the electromagnetic compatibility of the sensor, an electromagnetic shielding model for a central-tapped coil is established and discussed in detail. Previous studies have shown that unclosed shields with multiple layers and center grounding can effectively suppress EMI and eddy currents. According to these studies, an improved differential AEM sensor is constructed with a diameter, resultant effective area, resonant frequency, and normalized equivalent input noise of 1.1 m, 114 m², 35.6 kHz, and 13.3 nV/m², respectively. The accuracy of the noise model and the shielding effectiveness of the sensor have been verified experimentally. The results show a good agreement between calculated and measured results for the sensor internal noise. Additionally, over 20 dB shielding effectiveness is achieved in a complex electromagnetic environment. All of these results show a great improvement in sensor internal noise and shielding effectiveness.

  20. An Improved High-Sensitivity Airborne Transient Electromagnetic Sensor for Deep Penetration

    Directory of Open Access Journals (Sweden)

    Shudong Chen

    2017-01-01

    Full Text Available The investigation depth of transient electromagnetic sensors can be effectively increased by reducing the system noise, which is mainly composed of sensor internal noise, electromagnetic interference (EMI, and environmental noise, etc. A high-sensitivity airborne transient electromagnetic (AEM sensor with low sensor internal noise and good shielding effectiveness is of great importance for deep penetration. In this article, the design and optimization of such an AEM sensor is described in detail. To reduce sensor internal noise, a noise model with both a damping resistor and a preamplifier is established and analyzed. The results indicate that a sensor with a large diameter, low resonant frequency, and low sampling rate will have lower sensor internal noise. To improve the electromagnetic compatibility of the sensor, an electromagnetic shielding model for a central-tapped coil is established and discussed in detail. Previous studies have shown that unclosed shields with multiple layers and center grounding can effectively suppress EMI and eddy currents. According to these studies, an improved differential AEM sensor is constructed with a diameter, resultant effective area, resonant frequency, and normalized equivalent input noise of 1.1 m, 114 m2, 35.6 kHz, and 13.3 nV/m2, respectively. The accuracy of the noise model and the shielding effectiveness of the sensor have been verified experimentally. The results show a good agreement between calculated and measured results for the sensor internal noise. Additionally, over 20 dB shielding effectiveness is achieved in a complex electromagnetic environment. All of these results show a great improvement in sensor internal noise and shielding effectiveness.

  1. Compressive Transient Imaging

    KAUST Repository

    Sun, Qilin

    2017-04-01

    High resolution transient/3D imaging technology is of high interest in both scientific research and commercial application. Nowadays, all of the transient imaging methods suffer from low resolution or time consuming mechanical scanning. We proposed a new method based on TCSPC and Compressive Sensing to achieve a high resolution transient imaging with a several seconds capturing process. Picosecond laser sends a serious of equal interval pulse while synchronized SPAD camera\\'s detecting gate window has a precise phase delay at each cycle. After capturing enough points, we are able to make up a whole signal. By inserting a DMD device into the system, we are able to modulate all the frames of data using binary random patterns to reconstruct a super resolution transient/3D image later. Because the low fill factor of SPAD sensor will make a compressive sensing scenario ill-conditioned, We designed and fabricated a diffractive microlens array. We proposed a new CS reconstruction algorithm which is able to denoise at the same time for the measurements suffering from Poisson noise. Instead of a single SPAD senor, we chose a SPAD array because it can drastically reduce the requirement for the number of measurements and its reconstruction time. Further more, it not easy to reconstruct a high resolution image with only one single sensor while for an array, it just needs to reconstruct small patches and a few measurements. In this thesis, we evaluated the reconstruction methods using both clean measurements and the version corrupted by Poisson noise. The results show how the integration over the layers influence the image quality and our algorithm works well while the measurements suffer from non-trival Poisson noise. It\\'s a breakthrough in the areas of both transient imaging and compressive sensing.

  2. Stimulation of primary osteoblasts with ATP induces transient vinculin clustering at sites of high intracellular traction force.

    Science.gov (United States)

    Tan, Toh Weng; Pfau, Bastian; Jones, David; Meyer, Thomas

    2014-02-01

    Adenosine 5'-triphosphate (ATP), released in response to mechanical and inflammatory stimuli, induces the dynamic and asynchronous protrusion and subsequent retraction of local membrane structures in osteoblasts. The molecular mechanisms involved in the ligand-stimulated herniation of the plasma membrane are largely unknown, which prompted us to investigate whether the focal-adhesion protein vinculin is engaged in the cytoskeletal alterations that underlie the ATP-induced membrane blebbing. Using time-lapse fluorescence microscopy of primary bovine osteoblast-like cells expressing green fluorescent protein-tagged vinculin, we found that stimulation of cells with 100 μM ATP resulted in the transient and rapid clustering of recombinant vinculin in the cell periphery, starting approximately 100 s after addition of the nucleotide. The ephemeral nature of the vinculin clusters was made evident by the brevity of their mean assembly and disassembly times (66.7 ± 13.3 s and 99.0 ± 6.6 s, respectively). Traction force vector maps demonstrated that the vinculin-rich clusters were localized predominantly at sites of high traction force. Intracellular calcium measurements showed that the ligand-induced increase in [Ca(2+)]i clearly preceded the clustering of vinculin, since [Ca(2+)]i levels returned to normal within 30 s of exposure to ATP, indicating that intracellular calcium transients trigger a cascade of signalling events that ultimately result in the incorporation of vinculin into membrane-associated focal aggregates.

  3. Francis-99: Transient CFD simulation of load changes and turbine shutdown in a model sized high-head Francis turbine

    Science.gov (United States)

    Mössinger, Peter; Jester-Zürker, Roland; Jung, Alexander

    2017-01-01

    With increasing requirements for hydropower plant operation due to intermittent renewable energy sources like wind and solar, numerical simulations of transient operations in hydraulic turbo machines become more important. As a continuation of the work performed for the first workshop which covered three steady operating conditions, in the present paper load changes and a shutdown procedure are investigated. The findings of previous studies are used to create a 360° model and compare measurements with simulation results for the operating points part load, high load and best efficiency. A mesh motion procedure is introduced, allowing to represent moving guide vanes for load changes from best efficiency to part load and high load. Additionally an automated re-mesh procedure is added for turbine shutdown to ensure reliable mesh quality during guide vane closing. All three transient operations are compared to PIV velocity measurements in the draft tube and pressure signals in the vaneless space. Simulation results of axial velocity distributions for all three steady operation points, during both load changes and for the shutdown correlated well with the measurement. An offset at vaneless space pressure is found to be a result of guide vane corrections for the simulation to ensure similar velocity fields. Short-time Fourier transformation indicating increasing amplitudes and frequencies at speed-no load conditions. Further studies will discuss the already measured start-up procedure and investigate the necessity to consider the hydraulic system dynamics upstream of the turbine by means of a 1D3D coupling between the 3D flow field and a 1D system model.

  4. High energy neutrino and gamma ray transients from relativistic supernova shock breakouts

    CERN Document Server

    Kashiyama, Kazumi; Horiuchi, Shunsaku; Gao, Shan; Mészáros, Peter

    2013-01-01

    Relativistic shocks that accompany supernovae (SNe) produce X-ray burst emissions as they break out in the dense circumstellar medium around the progenitors. This phenomenon is sometimes associated with peculiar low-luminosity gamma-ray bursts (LL GRBs). Here, we investigate the high energy neutrino and gamma-ray counterparts of such a class of SNe. Just beyond the shock breakout radius, particle acceleration in the collisionless shock starts to operate in the presence of breakout photons. We show that protons may be accelerated to sufficiently high energies and produce high energy neutrinos and gamma rays via the photomeson interaction. These neutrinos and gamma rays may be detectable from 10 Mpc away by IceCube/KM3Net as multi-TeV transients almost simultaneously with the X-ray burst emission, and even from 100 Mpc away with follow-up observations by CTA using a wide-field sky monitor like Swift as a trigger. A statistical technique using a stacking approach could also be possible for the detection, with th...

  5. Measurements of Bauschinger effect and transient behavior of a quenched and partitioned advanced high strength steel

    Energy Technology Data Exchange (ETDEWEB)

    Zang, Shun-lai, E-mail: shawn@mail.xjtu.edu.cn [School of Mechanical Engineering, Xi' an Jiaotong University, No. 28, Xianning Road, Xi' an, Shaanxi (China); Sun, Li [Manufacturing Process Research, General Motors China Science Lab, No. 56, Jinwan Road, Shanghai (China); Niu, Chao [School of Mechanical Engineering, Xi' an Jiaotong University, No. 28, Xianning Road, Xi' an, Shaanxi (China)

    2013-12-01

    In recent decades, the needs for new advanced high strength steels (AHSS) with high ductility and strength have rapidly increased to achieve the targets of more fuel-efficient and safer vehicles in automotive industry. However, several undesirable phenomena are experimentally observed during the forming of such materials, particularly with complex loading and large plastic deformation. Springback is one of the most important problems that should be compensated in sheet metal forming process. In this paper, we investigated the hardening behavior of a Q and P (quench and partitioning) steel designated by QP980CR, which is a new third generation advance high strength steel, from the Baosteel Group Corp. in Shanghai, China. The uni-axial tensile and cyclic simple shear tests were conducted. The uni-axial tensile tests were performed on the specimens at 0°, 45° and 90° to rolling direction (RD). The flow stress and transverse strain evolution were obtained in view of the digital image correlation (DIC) measurement. The plastic anisotropy was optimized from the uni-axial tensile tests and thereafter incorporated into the simulations of cyclic simple shear tests. The cyclic simple shear tests were conducted with three prestrains to measure the Bauschinger effect, transient behavior and permanent softening, and to determine the material parameters of the combined isotropic-kinematic hardening model.

  6. Analysis of Precooling Injection Transient of Steam Generator for High Temperature Gas Cooled Reactor

    Directory of Open Access Journals (Sweden)

    Yan Wang

    2017-01-01

    Full Text Available After a postulated design basis accident leads high temperature gas cooled reactor to emergency shutdown, steam generator still remains with high temperature level and needs to be cooled down by a precooling before reactor restarts with clearing of fault. For the large difference of coolant temperature between inlet and outlet of steam generator in normal operation, the temperature distribution on the components of steam generator is very complicated. Therefore, the temperature descending rate of the components in steam generator needs to be limited to avoid the potential damage during the precooling stage. In this paper, a pebble-bed high temperature gas cooled reactor is modeled by thermal-hydraulic system analysis code and several postulated precooling injection transients are simulated and compared to evaluate their effects, which will provide support for the precooling design. The analysis results show that enough precooling injection is necessary to satisfy the precooling requirements, and larger mass flow rate of precooling water injection will accelerate the precooling process. The temperature decrease of steam generator is related to the precooling injection scenarios, and the maximal mass flow rate of the precooling injection should be limited to avoid the excessively quick temperature change of the structures in steam generator.

  7. Pharmaceutical residues in rivers: Quantification of transient storage and travel times by tracer experiments as key parameters for the determination of mass balances

    Science.gov (United States)

    Kunkel, U.; Clemens, C.; Radke, M.

    2009-04-01

    Pharmaceutical residues are commonly detected micropollutants in the aquatic environment. To derive mass balances of these substances in river stretches and to quantify their elimination, besides highly sophisticated analytical methods precise discharge measurements are inevitable. Two additional key parameters are the travel time of water along a river stretch and the hyporheic exchange of water and solutes. Knowledge of travel times is essential to compare concentrations at the upstream and downstream end of an investigated site. As biodegradation in sediments is assumed to be a potentially significant removal process for organic micropollutants in rivers, flow of water and solutes across the sediment-water boundary and their transient storage in the hyporheic zone are also pivotal processes. To determine these river characteristics, tracer experiments using the fluorescent dye uranine were conducted at a 15 km stretch of a small river in Northern Bavaria (Roter Main) in summer 2008. Three sub-reaches were studied in separate tracer tests, and river discharge was simultaneously determined using the ultrasonic doppler technique. The travel time of uranine for the total stretch amounted to almost 1.5 days, corresponding to a mean flow velocity of about 0.4 km/h. Strong tailing of the breakthrough curves could indicate significant transient storage in the hyporheic zone. However, we tentatively attribute this tailing to the merging of two river channels having different flow characteristics and not to transient storage, and thus the hyporheic exchange is expected to be small along the river stretch. The results of the experiments are currently being analyzed by the OTIS model in order to report the exchange rates of surface and pore water on a quantitative basis.

  8. Transient doping in atomic chains - a case study in time-resolved STM

    Science.gov (United States)

    Snijders, Paul; Polei, Stefan; Erwin, Steve; Himpsel, Franz; Meiwes-Broer, Karl-Heinz; Barke, Ingo

    2014-03-01

    Doping one-dimensional (1D) systems is notoriously difficult due to the structural disorder created by the dopants. The Si(553)-Au surface features an array of step edges with 1D chains of dangling bonds. These chains have a 1x3 ordered ground state. Using a scanning tunneling microscope we inject electrons from the tip into these step-edge chains and we observe that the periodicity of the atomic chains changes from the 1x3 ordered ground state to a 1x2 ordered excited state with increasing tunneling current. The threshold current for this transition is reduced at lower temperatures. In conjunction with first principles density-functional calculations we conclude that the 1x2 phase is created by transient doping of the atom chains. Random telegraph fluctuations between two levels of the tunneling current provide direct access to the dynamics of the phase transition, revealing a monostable state, and lifetimes in the millisecond range. Our method provides a possible avenue to map out a doping-dependent phase diagram in cases where conventional impurity doping is problematic. Research sponsored in part (PCS) by the Division of Materials Sciences and Engineering, Office of Basic Energy Sciences, U.S. Department of Energy.

  9. SN 2009ip at late times - an interacting transient at +2 years

    CERN Document Server

    Fraser, Morgan; Pastorello, Andrea; Jerkstrand, Anders; Smartt, Stephen J; Chen, Ting-Wan; Childress, Michael; Gilmore, Gerard; Inserra, Cosimo; Kankare, Erkki; Margheim, Steve; Mattila, Seppo; Valenti, Stefano; Ashall, Christopher; Benetti, Stefano; Botticella, Maria Teresa; Bauer, Franz Erik; Campbell, Heather; Elias-Rosa, Nancy; Fleury, Mathilde; Gal-Yam, Avishay; Hachinger, Stephan; Howell, D Andrew; Guillou, Laurent Le; Léget, Pierre-François; Morales-Garoffolo, Antonia; Polshaw, Joe; Spiro, Susanna; Sullivan, Mark; Taubenberger, Stefan; Turatto, Massimo; Walker, Emma S; Young, David R; Zhang, Bonnie

    2015-01-01

    We present photometric and spectroscopic observations of the interacting transient SN 2009ip taken during the 2013 and 2014 observing seasons. We characterise the photometric evolution as a steady and smooth decline in all bands, with a decline rate that is slower than expected for a solely $^{56}$Co-powered supernova at late phases. No further outbursts or eruptions were seen over a two year period from 2012 December until 2014 December. SN 2009ip remains brighter than its historic minimum from pre-discovery images. Spectroscopically, SN 2009ip continues to be dominated by strong, narrow ($\\lesssim$2000 km~s$^{-1}$) emission lines of H, He, Ca, and Fe. While we make tenuous detections of [Fe~{\\sc ii}] $\\lambda$7155 and [O~{\\sc i}] $\\lambda\\lambda$6300,6364 lines at the end of 2013 June and the start of 2013 October respectively, we see no strong broad nebular emission lines that could point to a core-collapse origin. In general, the lines appear relatively symmetric, with the exception of our final spectrum ...

  10. Time-Domain Simulations of Transient Species in Experimentally Relevant Environments

    Energy Technology Data Exchange (ETDEWEB)

    Ueltschi, Tyler W.; Fischer, Sean A.; Apra, Edoardo; Tarnovsky, Alexander N.; Govind, Niranjan; El-Khoury, Patrick Z.; Hess, Wayne P.

    2016-02-04

    Simulating the spectroscopic properties of short-lived thermal and photochemical reaction intermediates and products is a challenging task, as these species often feature atypical molecular and electronic structures. The complex environments in which such species typically reside in practice add further complexity to the problem. Herein, we tackle this problem in silico using ab initio molecular dynamics (AIMD) simulations, employing iso-CHBr3, namely H(Br)C-Br-Br, as a prototypical system. This species was chosen because it features both a non-conventional C-Br-Br bonding pattern, as well as a strong dependence of its spectral features on the local environment in which it resides, as illustrated in recent experimental reports. The spectroscopic properties of iso-CHBr3 were measured by several groups that captured this transient intermediate in the photochemistry of CHBr3 in the gas phase, in rare gas matrices at 5K, and in solution under ambient laboratory conditions. We simulate the UV-Vis and IR spectra of iso-CHBr3 in all three media, including a Ne cluster (64 atoms) and a methylcyclohexane cage (14 solvent molecules) representative of the matrix isolated and solvated species. We exclusively perform fully quantum mechanical static and dynamic simulations. By comparing our condensed phase simulations to their experimental analogues, we stress the importance of (i) conformational sampling, even at cryogenic temperatures, and (ii) using a fully quantum mechanical description of both solute and bath to properly account for the experimental observables.

  11. Transient bond scission of polytetrafluoroethylene under laser-induced shock compression studied by nanosecond time-resolved Raman spectroscopy

    Science.gov (United States)

    Nakamura, Kazutaka; Wakabayashi, Kunihiko; Konodo, Ken-Ichi

    2001-06-01

    Nanosecond time-resolved Raman spectroscopy has been performed to study polymer films, polytetrafluoroethylene (PTFE), under laser driven shock compression at laser power density of 4.0 GW/cm^2. The overtone-mode line of PTFE showed red shift (18 cm-1) at delay time of 9.3 ns due to the shock compression and corresponding pressure was estimated to be approximately 2.7 GPa by analyzing static and shock compression data. The estimated pressure was in good agreement with that estimated by ablation pressure in glass-confined geometry. A new vibrational line at 1900 cm-1 appeared only under shock compression and was assigned to the C=C streching in transient species such as a monomer (C_2F_4) produced by the shock-induced bond scission. Intensity of the new line increased with increasing delay time along propagation of the shock compression with a shock velocity of 2.5 km/s.

  12. PHOTOCONDUCTIVE PROPERTIES OF PVK:Alq3 BLEND FILMS STUDIED BY STEADY-STATE AND TIME-RESOLVED TRANSIENT PHOTOCURRENT SPECTRA

    Institute of Scientific and Technical Information of China (English)

    Hui Jin; Yan-bing Hou; Xian-guo Meng; Ai-wei Tang; Feng Teng

    2008-01-01

    The carrier transport properties of the blends of the hole transport material poly(N-vinylcarbazole) (PVK) and the electron transport material tris (8-hydroxyquinolinotato) aluminum Ⅲ (Alq3) are investigated at room temperature using steady-state and time-resolved transient photocurrent measurements as a function of doping concentration of Alq3. Due to lower LUMO and higher HOMO energy level of Alq3 than those of PVK, Alq3 molecules may act as carrier trap states in PVK films at low concentration. However, at high concentration of Alq3, phase separation reduces trap states to some extent,which leads to the rise of photocurrent. It is concluded that strong excitation transfer from PVK to Alq3 does harm to photocurrent, because strong fluorescence effect of Alq3 inhibits photogeneration of charge carriers. In time-resolved transient photocurrent measurements, it is found that the decay time is obviously shortened because the recombination rate increases and the electron mobility of Alq3 is higher than the hole mobility of PVK.

  13. Highly ionized disc and transient outflows in the Seyfert galaxy IRAS 18325-5926

    Science.gov (United States)

    Iwasawa, K.; Fabian, A. C.; Kara, E.; Reynolds, C. S.; Miniutti, G.; Tombesi, F.

    2016-08-01

    We report on strong X-ray variability and the Fe K-band spectrum of the Seyfert galaxy IRAS 18325-5926 obtained from the 2001 XMM-Newton EPIC pn observation with a duration of ~120 ks. While the X-ray source is highly variable, the 8-10 keV band shows larger variability than that of the lower energies. Amplified 8-10 keV flux variations are associated with two prominent flares of the X-ray source during the observation. The Fe K emission is peaked at 6.6 keV with moderate broadening. It is likely to originate from a highly ionized disc with an ionization parameter of log ξ ≃ 3. The Fe K line flux responds to the main flare, which supports its disc origin. A short burst of the Fe line flux has no relation to the continuum brightness, for which we have no clear explanation. We also find transient, blueshifted Fe K absorption features that can be identified with high-velocity (~0.2c) outflows of highly ionized gas, as found in other active galaxies. The deepest absorption feature appears only briefly (~1 h) at the onset of the main flare and disappears when the flare declines. The rapid evolution of the absorption spectrum makes this source peculiar among the active galaxies with high-velocity outflows. Another detection of the absorption feature also precedes the other flare. The variability of the absorption feature partly accounts for the excess variability in the 8-10 keV band where the absorption feature appears. Although no reverberation measurement is available, the black hole mass of ~2 × 106M⊙ is inferred from the X-ray variability. When this mass is assumed, the black hole is accreting at around the Eddington limit, which may fit the highly ionized disc and strong outflows observed in this galaxy.

  14. [Transient high frequency nodal rhythm after a high voltage electric shock. Report of one case].

    Science.gov (United States)

    Supervía, August; Del Baño, Francisco; Aguirre, Alfons; Membrilla, Estela

    2013-09-01

    Electrical shock can cause a direct myocardial damage and different types of arrhythmias, which are uncommon and occur more often when there is a high voltage exposure. We report a 19-year-old male that received a high voltage shock, falling thereafter from an altitude of four meters. On admission to the emergency room, he had second and third degree burns in the right hand and the left thigh. The electrocardiogram showed a nodal rhythm of 72 beats per minute. After four hours of monitoring, sinus rhythm returned spontaneously.

  15. On Detecting Transients

    CERN Document Server

    Belanger, G

    2013-01-01

    Transient phenomena are interesting and potentially highly revealing of details about the processes under observation and study that could otherwise go unnoticed. It is therefore important to maximise the sensitivity of the method used to identify such events. In this article we present a general procedure based on the use of the likelihood function for identifying transients that is particularly suited for real-time applications because it requires no grouping or pre-processing of the data. The method is optimal in the sense that all the information that is available in the data is used in the statistical decision making process, and is suitable for a wide range of applications. We here consider those most common in astrophysics which involve searching for transient sources, events or features in images, time series, energy spectra and power spectra, and demonstrate the use of the method in the cases of a transient in a time series or in a power spectrum. We derive a fit statistic that is ideal for fitting a...

  16. The Transient 3-D Transport Coupled Code TORT-TD/ATTICA3D for High-Fidelity Pebble-Bed HTGR Analyses

    Science.gov (United States)

    Seubert, Armin; Sureda, Antonio; Lapins, Janis; Bader, Johannes; Laurien, Eckart

    2012-01-01

    This article describes the 3D discrete ordinates-based coupled code system TORT-TD/ATTICA3D that aims at steady state and transient analyses of pebble-bed high-temperature gas cooled reactors. In view of increasing computing power, the application of time-dependent neutron transport methods becomes feasible for best estimate evaluations of safety margins. The calculation capabilities of TORT-TD/ATTICA3D are presented along with the coupling approach, with focus on the time-dependent neutron transport features of TORT-TD. Results obtained for the OECD/NEA/NSC PBMR-400 benchmark demonstrate the transient capabilities of TORT-TD/ATTICA3D.

  17. A quantitative method for evaluating numerical simulation accuracy of time-transient Lamb wave propagation with its applications to selecting appropriate element size and time step.

    Science.gov (United States)

    Wan, Xiang; Xu, Guanghua; Zhang, Qing; Tse, Peter W; Tan, Haihui

    2016-01-01

    Lamb wave technique has been widely used in non-destructive evaluation (NDE) and structural health monitoring (SHM). However, due to the multi-mode characteristics and dispersive nature, Lamb wave propagation behavior is much more complex than that of bulk waves. Numerous numerical simulations on Lamb wave propagation have been conducted to study its physical principles. However, few quantitative studies on evaluating the accuracy of these numerical simulations were reported. In this paper, a method based on cross correlation analysis for quantitatively evaluating the simulation accuracy of time-transient Lamb waves propagation is proposed. Two kinds of error, affecting the position and shape accuracies are firstly identified. Consequently, two quantitative indices, i.e., the GVE (group velocity error) and MACCC (maximum absolute value of cross correlation coefficient) derived from cross correlation analysis between a simulated signal and a reference waveform, are proposed to assess the position and shape errors of the simulated signal. In this way, the simulation accuracy on the position and shape is quantitatively evaluated. In order to apply this proposed method to select appropriate element size and time step, a specialized 2D-FEM program combined with the proposed method is developed. Then, the proper element size considering different element types and time step considering different time integration schemes are selected. These results proved that the proposed method is feasible and effective, and can be used as an efficient tool for quantitatively evaluating and verifying the simulation accuracy of time-transient Lamb wave propagation.

  18. Validating Steady-State and Transient Modeling Tools for High-Power-Density Thermoelectric Generators

    Science.gov (United States)

    Crane, D. T.; Koripella, C. R.; Jovovic, V.

    2012-06-01

    Steady-state and transient models have been created in a MATLAB/Simulink environment for high-power-density thermoelectric generators (TEG). These numerical models, comprising simultaneously solved, nonlinear, energy balance equations, simulate novel TEG architectures, such as a cylindrical TEG with gas/liquid heat exchangers. Model validation studies, including component-level testing of thermoelectric (TE) subassemblies, interface thermal resistance tests, and full-scale TEG tests, were performed under different operating conditions and designs. Targeted finite-element analysis studies were also conducted. A full-scale cylindrical-shaped TE generator was built using high-power-density, segmented TE elements and tested on a test-bench with hot air and cold water with maximum power output of 608 W. Measured performance data from these tests were used in model validation. Process outlet temperatures, pressure drops, hot and cold shunt temperatures along the length of the TEG, TEG voltage, and TEG current are some of the performance variables included in the model validation. The validated model is now being used with more confidence to optimize new TEG designs for different applications.

  19. High Density Infrared (HDI) Transient Liquid Coatings for Improved Wear and Corrosion Resistance

    Energy Technology Data Exchange (ETDEWEB)

    Ronald W. Smith

    2007-07-05

    This report documents a collaborative effort between Oak Ridge National Laboratory (ORNL), Materials Resources International and an industry team of participants to develop, evaluate and understand how high density infrared heating technology could be used to improve infiltrated carbide wear coatings and/or to densify sprayed coatings. The research included HDI fusion evaluations of infiltrated carbide suspensions such (BrazeCoat® S), composite suspensions with tool steel powders, thermally sprayed Ni-Cr- B-Si (self fluxing alloy) and nickel powder layers. The applied work developed practical HDI / transient liquid coating (TLC) procedures on test plates that demonstrated the ability to fuse carbide coatings for industrial applications such as agricultural blades, construction and mining vehicles. Fundamental studies helped create process models that led to improved process understanding and control. The coating of agricultural blades was demonstrated and showed the HDI process to have the ability to fuse industrial scale components. Sliding and brasive wear tests showed that high degree of wear resistance could be achieved with the addition of tool steel powders to carbide particulate composites.

  20. High Density Infrared (HDI) Transient Liquid Coatings for Improved Wear and Corrosion Resistance

    Energy Technology Data Exchange (ETDEWEB)

    Ronald W. Smith

    2007-07-05

    This report documents a collaborative effort between Oak Ridge National Laboratory (ORNL), Materials Resources International and an industry team of participants to develop, evaluate and understand how high density infrared heating technology could be used to improve infiltrated carbide wear coatings and/or to densify sprayed coatings. The research included HDI fusion evaluations of infiltrated carbide suspensions such (BrazeCoat® S), composite suspensions with tool steel powders, thermally sprayed Ni-Cr- B-Si (self fluxing alloy) and nickel powder layers. The applied work developed practical HDI / transient liquid coating (TLC) procedures on test plates that demonstrated the ability to fuse carbide coatings for industrial applications such as agricultural blades, construction and mining vehicles. Fundamental studies helped create process models that led to improved process understanding and control. The coating of agricultural blades was demonstrated and showed the HDI process to have the ability to fuse industrial scale components. Sliding and brasive wear tests showed that high degree of wear resistance could be achieved with the addition of tool steel powders to carbide particulate composites.

  1. Investigation on transient flow of a centrifugal charging pump in the process of high pressure safety injection

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Fan, E-mail: zhangfan4060@gmail.com; Yuan, Shouqi; Fu, Qiang; Tao, Yi

    2015-11-15

    Highlights: • The transient flow characteristics of the charging pump with the first stage impeller in the HPSI process have been investigated numerically by CFD. • The hydraulic performance of the charging pump during the HPSI are discussed, andthe absolute errors between the simulated and measured results are analyzed in the paper. • Pressure fluctuation in the impeller and flow pattern in the impeller were studied in the HPSI process. It is influenced little at the beginning of the HPSI process while fluctuates strongly in the end of the HPSI process. - Abstract: In order to investigate the transient flow characteristics of the centrifugal charging pump during the transient transition process of high pressure safety injection (HPSI) from Q = 148 m{sup 3}/h to Q = 160 m{sup 3}/h, numerical simulation and experiment are implemented in this study. The transient flow rate, which is the most important factor, is obtained from the experiment and works as the boundary condition to accurately accomplish the numerical simulation in the transient process. Internal characteristics under the variable operating conditions are analyzed through the transient simulation. The results shows that the absolute error between the simulated and measured heads is less than 2.26% and the absolute error between the simulated and measured efficiency is less than 2.04%. Pressure fluctuation in the impeller is less influenced by variable flow rate in the HPSI process, while flow pattern in the impeller is getting better and better with the flow rate increasing. As flow rate increases, fluid blocks on the tongue of the volute and it strikes in this area at large flow rate. Correspondingly, the pressure fluctuation is intense and vortex occurs gradually during this period, which obviously lowers the efficiency of the pump. The contents of the current work can provide references for the design optimization and fluid control of the pump used in the transient process of variable operating

  2. RACLETTE: a model for evaluating the thermal response of plasma facing components to slow high power plasma transients. Part II: Analysis of ITER plasma facing components

    Science.gov (United States)

    Federici, Gianfranco; Raffray, A. René

    1997-04-01

    The transient thermal model RACLETTE (acronym of Rate Analysis Code for pLasma Energy Transfer Transient Evaluation) described in part I of this paper is applied here to analyse the heat transfer and erosion effects of various slow (100 ms-10 s) high power energy transients on the actively cooled plasma facing components (PFCs) of the International Thermonuclear Experimental Reactor (ITER). These have a strong bearing on the PFC design and need careful analysis. The relevant parameters affecting the heat transfer during the plasma excursions are established. The temperature variation with time and space is evaluated together with the extent of vaporisation and melting (the latter only for metals) for the different candidate armour materials considered for the design (i.e., Be for the primary first wall, Be and CFCs for the limiter, Be, W, and CFCs for the divertor plates) and including for certain cases low-density vapour shielding effects. The critical heat flux, the change of the coolant parameters and the possible severe degradation of the coolant heat removal capability that could result under certain conditions during these transients, for example for the limiter, are also evaluated. Based on the results, the design implications on the heat removal performance and erosion damage of the variuos ITER PFCs are critically discussed and some recommendations are made for the selection of the most adequate protection materials and optimum armour thickness.

  3. An Algorithm for Real-Time Optimal Photocurrent Estimation Including Transient Detection for Resource-Constrained Imaging Applications

    Science.gov (United States)

    Zemcov, Michael; Crill, Brendan; Ryan, Matthew; Staniszewski, Zak

    2016-06-01

    Mega-pixel charge-integrating detectors are common in near-IR imaging applications. Optimal signal-to-noise ratio estimates of the photocurrents, which are particularly important in the low-signal regime, are produced by fitting linear models to sequential reads of the charge on the detector. Algorithms that solve this problem have a long history, but can be computationally intensive. Furthermore, the cosmic ray background is appreciable for these detectors in Earth orbit, particularly above the Earth’s magnetic poles and the South Atlantic Anomaly, and on-board reduction routines must be capable of flagging affected pixels. In this paper, we present an algorithm that generates optimal photocurrent estimates and flags random transient charge generation from cosmic rays, and is specifically designed to fit on a computationally restricted platform. We take as a case study the Spectro-Photometer for the History of the Universe, Epoch of Reionization, and Ices Explorer (SPHEREx), a NASA Small Explorer astrophysics experiment concept, and show that the algorithm can easily fit in the resource-constrained environment of such a restricted platform. Detailed simulations of the input astrophysical signals and detector array performance are used to characterize the fitting routines in the presence of complex noise properties and charge transients. We use both Hubble Space Telescope Wide Field Camera-3 and Wide-field Infrared Survey Explorer to develop an empirical understanding of the susceptibility of near-IR detectors in low earth orbit and build a model for realistic cosmic ray energy spectra and rates. We show that our algorithm generates an unbiased estimate of the true photocurrent that is identical to that from a standard line fitting package, and characterize the rate, energy, and timing of both detected and undetected transient events. This algorithm has significant potential for imaging with charge-integrating detectors in astrophysics, earth science, and remote

  4. Modeling of transient ionizing radiation effects in bipolar devices at high dose-rates

    Energy Technology Data Exchange (ETDEWEB)

    FJELDLY,T.A.; DENG,Y.; SHUR,M.S.; HJALMARSON,HAROLD P.; MUYSHONDT,ARNOLDO

    2000-04-25

    To optimally design circuits for operation at high intensities of ionizing radiation, and to accurately predict their a behavior under radiation, precise device models are needed that include both stationary and dynamic effects of such radiation. Depending on the type and intensity of the ionizing radiation, different degradation mechanisms, such as photoelectric effect, total dose effect, or single even upset might be dominant. In this paper, the authors consider the photoelectric effect associated with the generation of electron-hole pairs in the semiconductor. The effects of low radiation intensity on p-II diodes and bipolar junction transistors (BJTs) were described by low-injection theory in the classical paper by Wirth and Rogers. However, in BJTs compatible with modem integrated circuit technology, high-resistivity regions are often used to enhance device performance, either as a substrate or as an epitaxial layer such as the low-doped n-type collector region of the device. Using low-injection theory, the transient response of epitaxial BJTs was discussed by Florian et al., who mainly concentrated on the effects of the Hi-Lo (high doping - low doping) epilayer/substrate junction of the collector, and on geometrical effects of realistic devices. For devices with highly resistive regions, the assumption of low-level injection is often inappropriate, even at moderate radiation intensities, and a more complete theory for high-injection levels was needed. In the dynamic photocurrent model by Enlow and Alexander. p-n junctions exposed to high-intensity radiation were considered. In their work, the variation of the minority carrier lifetime with excess carrier density, and the effects of the ohmic electric field in the quasi-neutral (q-n) regions were included in a simplified manner. Later, Wunsch and Axness presented a more comprehensive model for the transient radiation response of p-n and p-i-n diode geometries. A stationary model for high-level injection in p

  5. A transient conductance technique for characterisation of deep-level defects in highly irradiated detector-grade silicon

    CERN Document Server

    Alexiev, D; Mo, L; Rosenfeld, A H

    1999-01-01

    The use of conventional capacitance-based deep-level transient spectroscopy is not applicable when defect concentrations approach the background carrier concentration. Due to this limitation the technique cannot be used for examining heavily irradiated silicon, or semi-insulating semiconductor materials. Optical deep-level transient conductance spectroscopy can overcome the limitations of capacitance-based techniques through the measurement of a conductance transient measured with a marginal oscillator. This paper provides details of the application of this method to heavily damaged high-purity silicon. Silicon-based PIN detector structures irradiated with 1 MeV neutrons, to approximately 3x10 sup 1 sup 3 n/cm sup 2 and detectors irradiated with 24 GeV/c protons, to 3.8x10 sup 1 sup 3 p/cm sup 2 , were examined. (author)

  6. Worst-Case Finish Time Analysis for DAG-Based Applications in the Presence of Transient Faults

    Institute of Scientific and Technical Information of China (English)

    Xiao-Tong Cui; Kai-Jie Wu; Tong-Quan Wei; Hsing-Mean Sha

    2016-01-01

    Tasks in hard real-time systems are required to meet preset deadlines, even in the presence of transient faults, and hence the analysis of worst-case finish time (WCFT) must consider the extra time incurred by re-executing tasks that were faulty. Existing solutions can only estimate WCFT and usually result in significant under-or over-estimation. In this work, we conclude that a sufficient and necessary condition of a task set experiencing its WCFT is that its critical task incurs all expected transient faults. A method is presented to identify the critical task and WCFT in O(|V|+|E|) where|V|and |E|are the number of tasks and dependencies between tasks, respectively. This method finds its application in testing the feasibility of directed acyclic graph (DAG) based task sets scheduled in a wide variety of fault-prone multi-processor systems, where the processors could be either homogeneous or heterogeneous, DVS-capable or DVS-incapable, etc. The common practices, which require the same time complexity as the proposed critical-task method, could either underestimate the worst case by up to 25%, or overestimate by 13%. Based on the proposed critical-task method, a simulated-annealing scheduling algorithm is developed to find the energy efficient fault-tolerant schedule for a given DAG task set. Experimental results show that the proposed critical-task method wins over a common practice by up to 40% in terms of energy saving.

  7. High glucose modifies transient receptor potential canonical type 6 channels via increased oxidative stress and syndecan-4 in human podocytes

    DEFF Research Database (Denmark)

    Thilo, Florian; Lee, Marlene; Xia, Shengqiang

    2014-01-01

    Transient receptor potential canonical (TRPC) channels type 6 play an important role in the function of human podocytes. Diabetic nephropathy is characterized by altered TRPC6 expression and functions of podocytes. Thus, we hypothesized that high glucose modifies TRPC6 channels via increased oxid...

  8. Charge deep-level transient spectroscopy study of high-energy-electron-beam-irradiated hydrogenated amorphous silicon

    NARCIS (Netherlands)

    Klaver, A.; Nádaždy, V.; Zeman, M.; Swaaiij, R.A.C.M.M.

    2006-01-01

    We present a study of changes in the defect density of states in hydrogenated amorphous silicon (a-Si:H) due to high-energy electron irradiation using charged deep-level transient spectroscopy. It was found that defect states near the conduction band were removed, while in other band gap regions the

  9. On the Momentum Transported by the Radiation Field of a Long Transient Dipole and Time Energy Uncertainty Principle

    Directory of Open Access Journals (Sweden)

    Vernon Cooray

    2016-11-01

    Full Text Available The paper describes the net momentum transported by the transient electromagnetic radiation field of a long transient dipole in free space. In the dipole a current is initiated at one end and propagates towards the other end where it is absorbed. The results show that the net momentum transported by the radiation is directed along the axis of the dipole where the currents are propagating. In general, the net momentum P transported by the electromagnetic radiation of the dipole is less than the quantity U / c , where U is the total energy radiated by the dipole and c is the speed of light in free space. In the case of a Hertzian dipole, the net momentum transported by the radiation field is zero because of the spatial symmetry of the radiation field. As the effective wavelength of the current decreases with respect to the length of the dipole (or the duration of the current decreases with respect to the travel time of the current along the dipole, the net momentum transported by the radiation field becomes closer and closer to U / c , and for effective wavelengths which are much shorter than the length of the dipole, P ≈ U / c . The results show that when the condition P ≈ U / c is satisfied, the radiated fields satisfy the condition Δ t Δ U ≥ h / 4 π where Δ t is the duration of the radiation, Δ U is the uncertainty in the dissipated energy and h is the Plank constant.

  10. The circadian clock has transient plasticity of period and is required for timing of nocturnal processes in Arabidopsis.

    Science.gov (United States)

    Dodd, Antony N; Dalchau, Neil; Gardner, Michael J; Baek, Seong-Jin; Webb, Alex A R

    2014-01-01

    A circadian rhythm matched to the phase and period of the day-night cycle has measurable benefits for land plants. We assessed the contribution of circadian period to the phasing of cellular events with the light : dark cycle. We also investigated the plasticity of circadian period within the Arabidopsis circadian oscillator. We monitored the circadian oscillator in wild-type and circadian period mutants under light : dark cycles of varying total duration. We also investigated changes in oscillator dynamics during and after the transition from light : dark cycles to free running conditions. Under light : dark cycles, dawn and dusk were anticipated differently when the circadian period was not resonant with the environmental period ('T cycle'). Entrainment to T cycles differing from the free-running period caused a short-term alteration in oscillator period. The transient plasticity of period was described by existing mathematical models of the Arabidopsis circadian network. We conclude that a circadian period resonant with the period of the environment is particularly important for anticipation of dawn and the timing of nocturnal events; and there is short-term and transient plasticity of period of the Arabidopsis circadian network.

  11. Comprehensive transient-state study for CARMENES NIR high-thermal stability

    Science.gov (United States)

    Becerril, Santiago; Sánchez, Miguel A.; Cárdenas, M. C.; Rabaza, Ovidio; Ramón, Alejandro; Abril, Miguel; Costillo, Luis P.; Morales, Rafael; Rodríguez, Alicia; Amado, Pedro J.

    2010-07-01

    CARMENES has been proposed as a next-generation instrument for the 3.5m Calar Alto Telescope. Its objective is finding habitable exoplanets around M dwarfs through radial velocity measurements (m/s level) in the near-infrared. Consequently, the NIR spectrograph is highly constraint regarding thermal/mechanical requirements. Indeed, the requirements used for the present study limit the thermal stability to +/-0.01K (within year period) over a working temperature of 243K in order to minimise radial velocity drifts. This can be achieved by implementing a solution based on several temperature-controlled rooms (TCR), whose smallest room encloses the vacuum vessel which houses the spectrograph's optomechanics. Nevertheless, several options have been taken into account to minimise the complexity of the thermal design: 1) Large thermal inertia of the system, where, given a thermal instability of the environment (typically, +/-0.1K), the optomechanical system remains stable within +/-0.01K in the long run; 2) Environment thermal control, where thermal stability is ensured by controlling the temperature of the environment surrounding the vacuum vessel. The present article also includes the comprehensive transient-state thermal analyses which have been implemented in order to make the best choice, as well as to give important inputs for the thermal layout of the instrument.

  12. AE activity during transient beta drops in high poloidal beta discharges

    Science.gov (United States)

    Huang, J.; Gong, X. Z.; Ren, Q. L.; Ding, S. Y.; Qian, J. P.; Pan, C. K.; Li, G. Q.; Heidbrink, W. W.; Garofalo, A. M.; McClenaghan, J.

    2016-10-01

    Enhanced AE activity has been observed during transient beta drops in high poloidal beta DIII-D discharges with internal transport barriers (ITBs). These drops in beta are believed to be caused by n=1 external kink modes. In some discharges, beta recovers within 200 ms but, in others, beta stays suppressed. A typical discharge has βP 3, qmin 3, and q95 12. The drop in beta affects both fast ions and thermal particles, and a drop is also observed in the density and rotation. The enhanced AE activity follows the instability that causes the beta drop, is largest at the lowest beta, and subsides as beta recovers. MHD stability analysis is planned. A database study of the plasma conditions associated with the collapse will be also presented. Supported in part by the US Department of Energy under DE-FC02-04ER54698, DE-AC05-06OR23100, and by the National Natural Science Foundation of China 11575249, and the National Magnetic Confinement Fusion Program of China No. 2015GB110005.

  13. Transient analysis of counterflowing jet over highly blunt cone in hypersonic flow

    Science.gov (United States)

    Barzegar Gerdroodbary, M.; Bishehsari, Shervin; Hosseinalipour, S. M.; Sedighi, K.

    2012-04-01

    Understanding the characteristics of various Counterflowing jets exiting from a nose cone is crucial for determining heat load reduction and usage of this device in various conditions. Such jets can undergo several flow regimes during venting, from initial supersonic flow, to transonic, to subsonic flow regimes as the pressure of jet decreases. A bow shock wave is a characteristic flow structure during the initial stage of the jet development, and this paper focuses on the development of the bow shock wave and the jet structure behind it. The transient behavior of a sonic counterflow jet is investigated using unsteady, axisymmetric Navier-Stokes solved with SST turbulence model at free stream Mach number of 5.75. The coolant gas (Carbon Dioxide and Helium) is chosen to inject into the hypersonic air flow at the nose of the model. The gases are considered to be ideal, and the computational domain is axisymmetric. The jet structure, including the shock wave and flow separation due to an adverse pressure gradient at the nose is investigated with a focus on the differences between high diffusivity coolant jet (Helium) and low diffusivity coolant jet (CO2) flow scenarios.

  14. Timing and spectral studies of the transient X-ray pulsar EXO 053109-6609.2 with ASCA and Beppo-SAX

    CERN Document Server

    Paul, B; Naik, S; Agrawal, P C

    2004-01-01

    We report timing and spectral properties of the transient Be X-ray pulsar EXO 053109--6609.2 studied using observations made with the ASCA and BeppoSAX observatories. Though there must have been at least one spin-down episode of the pulsar since its discovery, the new pulse period measurements show a monotonic spin-up trend since 1996. The pulse profile is found to have marginal energy dependence. There is also evidence for strong luminosity dependence of the pulse profile, a single peaked profile at low luminosity that changes to a double peaked profile at high luminosity. This suggests a change in the accretion pattern at certain luminosity level. The X-ray spectrum is found to consist of a simple power-law with photon index in the range of 0.4--0.8. At high intensity level the spectrum also shows presence of weak iron emission line.

  15. Achieving subpixel resolution with time-correlated transient signals in pixelated CdZnTe gamma-ray sensors using a focused laser beam (Conference Presentation)

    Science.gov (United States)

    Ocampo Giraldo, Luis A.; Bolotnikov, Aleksey E.; Camarda, Giuseppe S.; Cui, Yonggang; De Geronimo, Gianluigi; Gul, Rubi; Fried, Jack; Hossain, Anwar; Unlu, Kenan; Vernon, Emerson; Yang, Ge; James, Ralph B.

    2017-05-01

    High-resolution position-sensitive detectors have been proposed to correct response non-uniformities in Cadmium Zinc Telluride (CZT) crystals by virtually subdividing the detectors area into small voxels and equalizing responses from each voxel. 3D pixelated detectors coupled with multichannel readout electronics are the most advanced type of CZT devices offering many options in signal processing and enhancing detector performance. One recent innovation proposed for pixelated detectors is to use the induced (transient) signals from neighboring pixels to achieve high sub-pixel position resolution while keeping large pixel sizes. The main hurdle in achieving this goal is the relatively low signal induced on the neighboring pixels because of the electrostatic shielding effect caused by the collecting pixel. In addition, to achieve high position sensitivity one should rely on time-correlated transient signals, which means that digitized output signals must be used. We present the results of our studies to measure the amplitude of the pixel signals so that these can be used to measure positions of the interaction points. This is done with the processing of digitized correlated time signals measured from several adjacent pixels taking into account rise-time and charge-sharing effects. In these measurements we used a focused pulsed laser to generate a 10-micron beam at one milliwatt (650-nm wavelength) over the detector surface while the collecting pixel was moved in cardinal directions. The results include measurements that present the benefits of combining conventional pixel geometry with digital pulse processing for the best approach in achieving sub-pixel position resolution with the pixel dimensions of approximately 2 mm. We also present the sub-pixel resolution measurements at comparable energies from various gamma emitting isotopes.

  16. Identification of Transient and Permanent Faults

    Institute of Scientific and Technical Information of China (English)

    李幼仪; 董新洲; 孙元章

    2003-01-01

    A new algorithm was developed for arcing fault detection based on high-frequency current transients analyzed with wavelet transforms to avoid automatic reclosing on permanent faults. The characteristics of arc currents during transient faults were investigated. The current curves of transient and permanent faults are quite similar since current variation from the fault arc is much less than the voltage variation. However, the fault current details are quite different because of the arc extinguishing and reigniting. Dyadic wavelet transforms were used to identify the current variation since wavelet transform has time-frequency localization ability. Many electric magnetic transient program (EMTP) simulations have verified the feasibility of the algorithm.

  17. High-Energy pulse profile of the Transient X-ray Pulsar SAX J2103.5+4545

    CERN Document Server

    Falanga, M; Burderi, L; Bonnet-Bidaud, J M; Goldoni, P; Goldwurm, A; Lavagetto, G; Iaria, R; Robba, N R

    2005-01-01

    In two recent INTEGRAL papers, Lutovinov et al. (2003) and Blay et al. (2004) report a timing and spectral analysis of the transient Be/X-ray pulsar SAX J2103.5+4545 at high energies (5--200 keV). In this work we present for the first time a study of the pulse profile at energies above 20 keV using INTEGRAL data. The spin-pulse profile shows a prominent (with a duty cycle of 14%) and broad (with a FWHM of ~ 51 s) peak and a secondary peak which becomes more evident above 20 keV. The pulsed fraction increases with energy from ~ 45% at 5--40 keV to ~ 80% at 40--80 keV. The morphology of the pulse profile also changes as a function of energy, consistent with variations in the spectral components that are visible in the pulse phase resolved spectra. A study of the double peaked profile shows that the difference in the two peaks can be modeled by a different scattering fraction between the radiation from the two magnetic poles.

  18. Switching Transient Generation in Surface Interrogation Scanning Electrochemical Microscopy and Time-of-Flight Techniques.

    Science.gov (United States)

    Ahn, Hyun S; Bard, Allen J

    2015-12-15

    In surface interrogation scanning electrochemical microscopy (SI-SECM), fine and accurate control of the delay time between substrate generation and tip interrogation (tdelay) is crucial because tdelay defines the decay time of the reactive intermediate. In previous applications of the SI-SECM, the resolution in the control of tdelay has been limited to several hundreds of milliseconds due to the slow switching of the bipotentiostat. In this work, we have improved the time resolution of tdelay control up to ca. 1 μs, enhancing the SI-SECM to be competitive in the time domain with the decay of many reactive intermediates. The rapid switching SI-SECM has been implemented in a substrate generation-tip collection time-of-flight (SG-TC TOF) experiment of a solution redox mediator, and the results obtained from the experiment exhibited good agreement with that obtained from digital simulation. The reaction rate constant of surface Co(IV) on oxygen-evolving catalyst film, which was inaccessible thus far due to the lack of tdelay control, has been measured by the rapid switching SI-SECM.

  19. Analytical study of the liquid phase transient behavior of a high temperature heat pipe

    Science.gov (United States)

    Roche, Gregory Lawrence

    1988-09-01

    The transient operation of the liquid phase of a high temperature heat pipe is studied. The study was conducted in support of advanced heat pipe applications that require reliable transport of high temperature drops and significant distances under a broad spectrum of operating conditions. The heat pipe configuration studied consists of a sealed cylindrical enclosure containing a capillary wick structure and sodium working fluid. The wick is an annular flow channel configuration formed between the enclosure interior wall and a concentric cylindrical tube of fine pore screen. The study approach is analytical through the solution of the governing equations. The energy equation is solved over the pipe wall and liquid region using the finite difference Peaceman-Rachford alternating direction implicit numerical method. The continuity and momentum equations are solved over the liquid region by the integral method. The energy equation and liquid dynamics equation are tightly coupled due to the phase change process at the liquid-vapor interface. A kinetic theory model is used to define the phase change process in terms of the temperature jump between the liquid-vapor surface and the bulk vapor. Extensive auxiliary relations, including sodium properties as functions of temperature, are used to close the analytical system. The solution procedure is implemented in a FORTRAN algorithm with some optimization features to take advantage of the IBM System/370 Model 3090 vectorization facility. The code was intended for coupling to a vapor phase algorithm so that the entire heat pipe problem could be solved. As a test of code capabilities, the vapor phase was approximated in a simple manner.

  20. Searching for High-energy, Horizon-scale Emissions from Galactic Black Hole Transients during Quiescence

    Science.gov (United States)

    Lin, L. C.-C.; Pu, Hung-Yi; Hirotani, Kouichi; Kong, Albert K. H.; Matsushita, Satoki; Chang, Hsiang-Kuang; Inoue, Makoto; Tam, Pak-Hin T.

    2017-08-01

    We search for the gamma-ray counterparts of stellar-mass black holes using the long-term Fermi archive to investigate the electrostatic acceleration of electrons and positrons in the vicinity of the event horizon. We achieve this by applying the pulsar outer-gap model to their magnetospheres. When a black hole transient (BHT) is in a low-hard or quiescent state, the radiatively inefficient accretion flow cannot emit enough MeV photons that are required to sustain the force-free magnetosphere in the polar funnel via two-photon collisions. In this charge-starved gap region, an electric field arises along the magnetic field lines to accelerate electrons and positrons into ultra-relativistic energies. These relativistic leptons emit copious Gamma-rays via the curvature and inverse-Compton (IC) processes. It is found that these gamma-ray emissions exhibit a flaring activity when the plasma accretion rate typically stays between 0.01% and 0.005% of the Eddington value for rapidly rotating, stellar-mass black holes. By analyzing the detection limit determined from archival Fermi/Large Area Telescope data, we find that the 7-year averaged duty cycle of such flaring activities should be less than 5% and 10% for XTE J1118+480 and 1A 0620-00, respectively, and that the detection limit is comparable to the theoretical prediction for V404 Cyg. It is predicted that the gap emission can be discriminated from the jet emission if we investigate the high-energy spectral behavior or observe nearby BHTs during deep quiescence simultaneously in infrared wavelength and very-high energies.

  1. Real-time monitoring and analyzing system for transient power quality%暂态电能质量实时监测和分析系统

    Institute of Scientific and Technical Information of China (English)

    冯浩; 谢盛平; 郑贺伟

    2011-01-01

    一套完整的电能质量监测装置要求能够同时对各种稳态和暂态电能质量信号进行实时监测和分析,而现有的监测装置仅有少数具有暂态监测和分析功能,且只涉及到电压暂降、电压暂升和短时电压中断这3种扰动信号.为了对目前各种常见暂态电能质量扰动信号进行实时监测和分析,提出了一种以移动离散小波变换算法为核心,虚拟仪器为平台的设计方案,所设计出的系统可以根据用户的需要实现在线和离线分析,能够实时地检测到常见暂态电能质量扰动信号的多个参数指标,同时能够对扰动信号进行准确而又快速的分类.最后,通过实验验证了该系统的实用性和可靠性.%A set of integrated power quality monitoring equipment needs real-time monitor and analyze both steady and transient power quality signals, however, only a little of existing monitoring equipment has the real-time transient monitoring and analyzing function,involving just three disturbance signals: voltage sag, voltage swell and momentary voltage interruption. In order to monitor and analyze all kinds of common transient power quality disturbance signals,a design proposal based on the running discrete wavelet transform and virtual instrument is proposed. The system can achieve on-line and off-line analysis depending on the user's requirement, with the function of detecting multiple index of the transient disturbance signals accurately,and classifying them automatically with high accuracy and speed. Finally,experiment results demonstrate the good practicability and reliability of the system.

  2. Real-time dedispersion for fast radio transient surveys, using auto tuning on many-core accelerators

    Science.gov (United States)

    Sclocco, A.; van Leeuwen, J.; Bal, H. E.; van Nieuwpoort, R. V.

    2016-01-01

    Dedispersion, the removal of deleterious smearing of impulsive signals by the interstellar matter, is one of the most intensive processing steps in any radio survey for pulsars and fast transients. We here present a study of the parallelization of this algorithm on many-core accelerators, including GPUs from AMD and NVIDIA, and the Intel Xeon Phi. We find that dedispersion is inherently memory-bound. Even in a perfect scenario, hardware limitations keep the arithmetic intensity low, thus limiting performance. We next exploit auto-tuning to adapt dedispersion to different accelerators, observations, and even telescopes. We demonstrate that the optimal settings differ between observational setups, and that auto-tuning significantly improves performance. This impacts time-domain surveys from Apertif to SKA.

  3. Combined dynamic stiffness matrix and precise time integration method for transient forced vibration response analysis of beams

    Science.gov (United States)

    Tang, Bin

    2008-01-01

    A method has been developed for determining the transient response of a beam. The beam is divided into several continuous Timoshenko beam elements. The overall dynamic stiffness matrix is assembled in turn. Using Leung's equation, we derive the overall mass and stiffness matrices which are more suitable for response analysis than the overall dynamic stiffness matrix. The forced vibration of the beam is computed by the precise time integration method. Three illustrative beams are discussed to evaluate the performance of the current method. Solutions calculated by the finite element method and theoretical analysis are also enumerated for comparison. In these examples, we have found that the current method can solve the forced vibration of structures with a higher precision.

  4. Solution and its application of transient stream/groundwater model subjected to time-dependent vertical seepage

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Based on the first linearized Boussinesq equation, the analytical solution of the transient groundwater model, which is used for describing phreatic flow in a semiinfinite aquifer bounded by a linear stream and subjected to time-dependent vertical seepage, is derived out by Laplace transform and the convolution integral.According to the mathematical characteristics of the solution, different methods for estimating aquifer parameters are constructed to satisfy different hydrological conditions.Then, the equation for estimating water exchange between stream and aquifer is proposed, and a recursion equation or estimating the intensity of phreatic evaporation is also proposed.A phreatic aquifer stream system located in Huaibei Plain, Anhui Province, China, is taken as an example to demonstrate the estimation process of the methods stated herein.

  5. Real-Time Dedispersion for Fast Radio Transient Surveys, using Auto Tuning on Many-Core Accelerators

    CERN Document Server

    Sclocco, Alessio; Bal, Henri E; van Nieuwpoort, Rob V

    2016-01-01

    Dedispersion, the removal of deleterious smearing of impulsive signals by the interstellar matter, is one of the most intensive processing steps in any radio survey for pulsars and fast transients. We here present a study of the parallelization of this algorithm on many-core accelerators, including GPUs from AMD and NVIDIA, and the Intel Xeon Phi. We find that dedispersion is inherently memory-bound. Even in a perfect scenario, hardware limitations keep the arithmetic intensity low, thus limiting performance. We next exploit auto-tuning to adapt dedispersion to different accelerators, observations, and even telescopes. We demonstrate that the optimal settings differ between observational setups, and that auto-tuning significantly improves performance. This impacts time-domain surveys from Apertif to SKA.

  6. A systematic search for close supermassive black hole binaries in the Catalina Real-Time Transient Survey

    CERN Document Server

    Graham, Matthew J; Stern, Daniel; Drake, Andrew J; Mahabal, Ashish A; Donalek, Ciro; Glikman, Eilat; Larsen, Steve; Christensen, Eric

    2015-01-01

    Hierarchical assembly models predict a population of supermassive black hole (SMBH) binaries. These are not resolvable by direct imaging but may be detectable via periodic variability (or nanohertz frequency gravitational waves). Following our detection of a 5.2 year periodic signal in the quasar PG 1302-102 (Graham et al. 2015), we present a novel analysis of the optical variability of 243,500 known spectroscopically confirmed quasars using data from the Catalina Real-time Transient Survey (CRTS) to look for close (< 0.1 pc) SMBH systems. Looking for a strong Keplerian periodic signal with at least 1.5 cycles over a baseline of nine years, we find a sample of 111 candidate objects. This is in conservative agreement with theoretical predictions from models of binary SMBH populations. Simulated data sets, assuming stochastic variability, also produce no equivalent candidates implying a low likelihood of spurious detections. The periodicity seen is likely attributable to either jet precession, warped accreti...

  7. Time-Resolved Soft X-ray Diffraction Reveals Transient Structural Distortions of Ternary Liquid Crystals

    Directory of Open Access Journals (Sweden)

    Klaus Mann

    2009-11-01

    Full Text Available Home-based soft X-ray time-resolved scattering experiments with nanosecond time resolution (10 ns and nanometer spatial resolution were carried out at a table top soft X-ray plasma source (2.2–5.2 nm. The investigated system was the lyotropic liquid crystal C16E7/paraffin/glycerol/formamide/IR 5. Usually, major changes in physical, chemical, and/or optical properties of the sample occur as a result of structural changes and shrinking morphology. Here, these effects occur as a consequence of the energy absorption in the sample upon optical laser excitation in the IR regime. The liquid crystal shows changes in the structural response within few hundred nanoseconds showing a time decay of 182 ns. A decrease of the Bragg peak diffracted intensity of 30% and a coherent macroscopic movement of the Bragg reflection are found as a response to the optical pump. The Bragg reflection movement is established to be isotropic and diffusion controlled (1 μs. Structural processes are analyzed in the Patterson analysis framework of the time-varying diffraction peaks revealing that the inter-lamellar distance increases by 2.7 Å resulting in an elongation of the coherently expanding lamella crystallite. The present studies emphasize the possibility of applying TR-SXRD techniques for studying the mechanical dynamics of nanosystems.

  8. Transient analysis of microwave Gunn oscillator using extended spectral element time domain method

    Science.gov (United States)

    Xu, Kan; Chen, Rushan; Sheng, Yijun; Fu, Ping; Chen, Chuan; Yan, Qingshang; Yu, Yanyan

    2011-10-01

    In this study, the microwave Gunn oscillator is analyzed by a hybrid electromagnetic circuit simulator, which is based on the spectral element time domain (SETD) method. The Gunn diode within the oscillator is treated as a lumped element, while the passive distributed part of the oscillator is modeled using the SETD method. In order to incorporate the contribution of the Gunn diode into the SETD context, the SETD method is extended by introducing a lumped current term into the second-order vector wave equation. When Galerkin's method is used for the space discretization and the central difference scheme is used for time stepping, a global SETD system involving the Gunn diode is assembled. Furthermore, the global system matrix is block-diagonal and the inversion of this matrix can be easily implemented, and thus the extended SETD method is a fully explicit solver and CPU time can be significantly reduced. By virtue of this method, the strong nonlinear feature of the Gunn oscillator is well characterized in the time domain, such as the phenomenon of injection locking. Numerical results demonstrate the ability and effectiveness of the extended SETD method for the fast analysis of microwave Gunn oscillator.

  9. Time transients in the quantum corrected Newtonian potential induced by a massless nonminimally coupled scalar field

    NARCIS (Netherlands)

    Marunovic, A.; Prokopec, T.

    2011-01-01

    We calculate the one-loop graviton vacuum polarization induced by a massless, nonminimally coupled scalar field on Minkowski background. We make use of the Schwinger-Keldysh formalism, which allows us to study time dependent phenomena. As an application we compute the leading quantum correction to

  10. Time-resolved soft X-ray diffraction reveals transient structural distortions of ternary liquid crystals.

    Science.gov (United States)

    Quevedo, Wilson; Peth, Christian; Busse, Gerhard; Scholz, Mirko; Mann, Klaus; Techert, Simone

    2009-11-04

    Home-based soft X-ray time-resolved scattering experiments with nanosecond time resolution (10 ns) and nanometer spatial resolution were carried out at a table top soft X-ray plasma source (2.2-5.2 nm). The investigated system was the lyotropic liquid crystal C(16)E(7)/paraffin/glycerol/formamide/IR 5. Usually, major changes in physical, chemical, and/or optical properties of the sample occur as a result of structural changes and shrinking morphology. Here, these effects occur as a consequence of the energy absorption in the sample upon optical laser excitation in the IR regime. The liquid crystal shows changes in the structural response within few hundred nanoseconds showing a time decay of 182 ns. A decrease of the Bragg peak diffracted intensity of 30% and a coherent macroscopic movement of the Bragg reflection are found as a response to the optical pump. The Bragg reflection movement is established to be isotropic and diffusion controlled (1 micros). Structural processes are analyzed in the Patterson analysis framework of the time-varying diffraction peaks revealing that the inter-lamellar distance increases by 2.7 A resulting in an elongation of the coherently expanding lamella crystallite. The present studies emphasize the possibility of applying TR-SXRD techniques for studying the mechanical dynamics of nanosystems.

  11. High Sensitivity, High Frequency and High Time Resolution Decimetric Spectroscope

    Science.gov (United States)

    Sawant, H. S.; Rosa, R. R.

    1990-11-01

    RESUMEN. Se ha desarrollado el primer espectroscopio decimetrico latino americano operando en una banda de 100 MHz con alta resoluci6n de fre- cuencia (100 KHz) y tiempo (10 ms), alrededor de cualquier centro de frecuencia en el intervalo de 2000-200 MHz. El prop6sito de esta nota es describir investigaciones solares y no solares que se planean, progra ma de investigaci6n y la situaci6n actual de desarrollo de este espectroscopio. ABSTRACT. First Latin American Decimetric Spectroscope operating over a band of 100 MHz with high resolution in frequency (100 KHz) and time (10 ms), around any center frequency in the range of 2000-200 MHz is being developed. The purpose of this note is to describe planned solar, and non-solar, research programmes and present status of development of this spectroscope. Keq wo : INSTRUMENTS - SPECTROSCOPY

  12. A discontinuous galerkin time domain-boundary integral method for analyzing transient electromagnetic scattering

    KAUST Repository

    Li, Ping

    2014-07-01

    This paper presents an algorithm hybridizing discontinuous Galerkin time domain (DGTD) method and time domain boundary integral (BI) algorithm for 3-D open region electromagnetic scattering analysis. The computational domain of DGTD is rigorously truncated by analytically evaluating the incoming numerical flux from the outside of the truncation boundary through BI method based on the Huygens\\' principle. The advantages of the proposed method are that it allows the truncation boundary to be conformal to arbitrary (convex/ concave) scattering objects, well-separated scatters can be truncated by their local meshes without losing the physics (such as coupling/multiple scattering) of the problem, thus reducing the total mesh elements. Furthermore, low frequency waves can be efficiently absorbed, and the field outside the truncation domain can be conveniently calculated using the same BI formulation. Numerical examples are benchmarked to demonstrate the accuracy and versatility of the proposed method.

  13. Highly efficient isolation of Populus mesophyll protoplasts and its application in transient expression assays.

    Directory of Open Access Journals (Sweden)

    Jianjun Guo

    Full Text Available BACKGROUND: Populus is a model woody plant and a promising feedstock for lignocellulosic biofuel production. However, its lengthy life cycle impedes rapid characterization of gene function. METHODOLOGY/PRINCIPAL FINDINGS: We optimized a Populus leaf mesophyll protoplast isolation protocol and established a Populus protoplast transient expression system. We demonstrated that Populus protoplasts are able to respond to hormonal stimuli and that a series of organelle markers are correctly localized in the Populus protoplasts. Furthermore, we showed that the Populus protoplast transient expression system is suitable for studying protein-protein interaction, gene activation, and cellular signaling events. CONCLUSIONS/SIGNIFICANCE: This study established a method for efficient isolation of protoplasts from Populus leaf and demonstrated the efficacy of using Populus protoplast transient expression assays as an in vivo system to characterize genes and pathways.

  14. Highly Efficient Isolation of Populus Mesophyll Protoplasts and Its Application in Transient Expression Assays

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Jianjun [ORNL; Morrell-Falvey, Jennifer L [ORNL; Labbe, Jessy L [ORNL; Muchero, Wellington [ORNL; Kalluri, Udaya C [ORNL; Tuskan, Gerald A [ORNL; Chen, Jay [ORNL

    2012-01-01

    Background: Populus is a model woody plant and a promising feedstock for lignocellulosic biofuel production. However, its lengthy life cycle impedes rapid characterization of gene function. Methodology/Principal Findings: We optimized a Populus leaf mesophyll protoplast isolation protocol and established a Populus protoplast transient expression system. We demonstrated that Populus protoplasts are able to respond to hormonal stimuli and that a series of organelle markers are correctly localized in the Populus protoplasts. Furthermore, we showed that the Populus protoplast transient expression system is suitable for studying protein-protein interaction, gene activation, and cellular signaling events. Conclusions/Significance: This study established a method for efficient isolation of protoplasts from Populus leaf and demonstrated the efficacy of using Populus protoplast transient expression assays as an in vivo system to characterize genes and pathways.

  15. Systematic Review of the Exposure Assessment and Epidemiology of High-Frequency Voltage Transients

    Directory of Open Access Journals (Sweden)

    Frank eDe Vocht

    2016-03-01

    Full Text Available Conclusions of epidemiological studies describing adverse health effects as a result of exposure to electromagnetic fields are not unanimous and often contradictory. It has been proposed that an explanation could be that high frequency voltage transients (dirty electricity [DE] which are superimposed on 50/60Hz fields, but are generally not measured, is the real causal agent. DE has been linked to many different health and wellbeing effects, and on the basis of this an industry selling measurement and filtering equipment is growing. We reviewed the available peer-reviewed evidence for DE as a causal agent for adverse human health effects.A literature search was performed in the Cochrane Library, PubMed, Web of Science, Google Scholar and additional publications were obtained from reference lists and from the grey literature. This search resulted in 25 publications; 16 included primary epidemiological and/or exposure data. All studies were reviewed by both authors independently, and including a re-review of studies included in a review of data available up to July 31 2009 by one of the authors. DE has been measured differently in different studies and comparison data are not available. There is no evidence for 50 Graham/Stetzer (G/S units as a safety threshold being anything more than arbitrary. The epidemiological evidence on human health effects of DE is primarily based on, often re-used, case descriptions. Quantitative evidence relies on self-reporting in non-blinded interventions, ecological associations, and one cross-sectional cohort study of cancer risk which does not point to DE as the causal agent. The available evidence for DE as an exposure affecting human health at present does not stand up to scientific scrutiny.

  16. Direct Time Domain Numerical Analysis of Transient Behavior of a VLFS during Unsteady External Loads in Wave Condition

    Directory of Open Access Journals (Sweden)

    Yong Cheng

    2014-01-01

    Full Text Available The transient response of the VLFS subjected to arbitrary external load is systematically investigated by a direct time domain modal expansion method, in which the BEM solutions based on time domain Kelvin sources are used for hydrodynamic forces. In the analysis, the time domain free-surface Green functions with sufficient accuracy are rapidly evaluated in finite water depth by the interpolation-tabulation method, and the boundary integral equation with a quarter VLFS model is established taking advantage of symmetry of flow field and structure. The validity of the present method is verified by comparing with the time histories of vertical displacements of the VLFS during a mass drop and airplane landing and takeoff in still water conditions, respectively. Then the developed numerical scheme is used in wave conditions to study the combined action taking into account the mass drop/airplane landing/takeoff loads as well as incident wave action. It is found that the elevation of structural waves due to mass drop load can be significantly changed near the impact region, while the vertical motion of runway in wave conditions is dominant as compared with that only generated by airplane.

  17. Time scales of relaxation dynamics during transient conditions in two-phase flow: RELAXATION DYNAMICS

    Energy Technology Data Exchange (ETDEWEB)

    Schlüter, Steffen [School of Chemical, Biological and Environmental Engineering, Oregon State University, Corvallis Oregon USA; Department Soil Physics, Helmholtz-Centre for Environmental Research-UFZ, Halle Germany; Berg, Steffen [Shell Global Solutions International B.V., Rijswijk Netherlands; Li, Tianyi [School of Chemical, Biological and Environmental Engineering, Oregon State University, Corvallis Oregon USA; Vogel, Hans-Jörg [Department Soil Physics, Helmholtz-Centre for Environmental Research-UFZ, Halle Germany; Institut für Agrar- und Ernährungswissenschaften, Martin-Luther-Universität Halle-Wittenberg, Halle Germany; Wildenschild, Dorthe [School of Chemical, Biological and Environmental Engineering, Oregon State University, Corvallis Oregon USA

    2017-06-01

    The relaxation dynamics toward a hydrostatic equilibrium after a change in phase saturation in porous media is governed by fluid reconfiguration at the pore scale. Little is known whether a hydrostatic equilibrium in which all interfaces come to rest is ever reached and which microscopic processes govern the time scales of relaxation. Here we apply fast synchrotron-based X-ray tomography (X-ray CT) to measure the slow relaxation dynamics of fluid interfaces in a glass bead pack after fast drainage of the sample. The relaxation of interfaces triggers internal redistribution of fluids, reduces the surface energy stored in the fluid interfaces, and relaxes the contact angle toward the equilibrium value while the fluid topology remains unchanged. The equilibration of capillary pressures occurs in two stages: (i) a quick relaxation within seconds in which most of the pressure drop that built up during drainage is dissipated, a process that is to fast to be captured with fast X-ray CT, and (ii) a slow relaxation with characteristic time scales of 1–4 h which manifests itself as a spontaneous imbibition process that is well described by the Washburn equation for capillary rise in porous media. The slow relaxation implies that a hydrostatic equilibrium is hardly ever attained in practice when conducting two-phase experiments in which a flux boundary condition is changed from flow to no-flow. Implications for experiments with pressure boundary conditions are discussed.

  18. Real time monitoring of water distribution in an operando fuel cell during transient states

    Science.gov (United States)

    Martinez, N.; Peng, Z.; Morin, A.; Porcar, L.; Gebel, G.; Lyonnard, S.

    2017-10-01

    The water distribution of an operating proton exchange membrane fuel cell (PEMFC) was monitored in real time by using Small Angle Neutron Scattering (SANS). The formation of liquid water was obtained simultaneously with the evolution of the water content inside the membrane. Measurements were performed when changing current with a time resolution of 10 s, providing insights on the kinetics of water management prior to the stationary phase. We confirmed that water distribution is strongly heterogeneous at the scale at of the whole Membrane Electrode Assembly. As already reported, at the local scale there is no straightforward link between the amounts of water present inside and outside the membrane. However, we show that the temporal evolutions of these two parameters are strongly correlated. In particular, the local membrane water content is nearly instantaneously correlated to the total liquid water content, whether it is located at the anode or cathode side. These results can help in optimizing 3D stationary diphasic models used to predict PEMFC water distribution.

  19. Time-frequency analysis of transient signals in power distribution systems

    Science.gov (United States)

    Danisor, Alin

    2016-12-01

    In this paper we propose an analysis of the possibilities of spikes detection which appears on the power lines of electrical distribution. The importance of this problem consists in the possibility of surveillance at distance the regimes of power electrical motors. This regime was studied in an industrial network which supplies the power pumps necessary to assures a city water consumption. We consider the industrial electrical networks as a linear, time invariant and causal system which has a certain response to the electrical spikes, assimilates with Dirac impulses. For that reason the output signal represents the impulse response of the system. The main problem is to detect this signal and to establish the moments of its presence. To detect and extract the useful signal linear methods like fourier transform or Short Time Fourier Analysis are not very relevant. A more efficient method to detect the spikes presence consists in using quadratic detectors in timefrequency domain, like detectors based on Wigner-Ville transform or detectors based on Ambiguity Function. In this paper we tried to present the advantages of these last detectors.

  20. Time course of transient cortical scintigraphic defects associated with acute pyelonephritis

    Energy Technology Data Exchange (ETDEWEB)

    Ditchfield, Michael R.; Summerville, Dianne; Cook, David J.; Campo, John F. de [Department of Radiology, Royal Children' s Hospital, Melbourne 3052 (Australia); Grimwood, Keith; Nolan, Terrance M. [Department of General Paediatrics, Royal Children' s Hospital, Melbourne (Australia); Department of Paediatrics, University of Melbourne, Melbourne (Australia); Powell, Harley R. [Department of Nephrology, Royal Children' s Hospital, Melbourne (Australia); Sloane, Robert [Department of General Paediatrics, Royal Children' s Hospital, Melbourne (Australia)

    2002-12-01

    Acute pyelonephritis is distinguished from renal scarring using repeat cortical scintigraphy. The defects of acute pyelonephritis resolve, while those of scars persist. To determine the duration of reversible cortical defects following acute pyelonephritis and the time interval required to differentiate infection from scars. Materials and methods. An observational prospective study of 193 children (386 kidneys) aged less than 5 years following their first proven urinary tract infection (UTI). Renal cortical scintigraphic defects were detected in 112 (29%) kidneys within 15 days of diagnosis. Of these, 95 underwent repeat renal cortical scans 2 years after the UTI, including 50 with additional scans performed within 2-6 months of infection. Of the 50 kidneys undergoing a second renal cortical scan within 2-6 months of the first UTI, 22 (44%) had persistent defects. A third scan was performed on 17 (77%) kidneys after 2 years, by which time defects had resolved in another 8 (47%) kidneys. The predictive value of defects detected within 2-6 months of UTI representing scars is 53% (95% CI 28, 77). Overall, nine (18%) kidneys with initial renal cortical abnormalities had permanent defects. In the 45 kidneys undergoing a second cortical scan more than 6 months after the UTI, 11 (24%) had persistent defects. None of the 95 kidneys undergoing serial scans developed new or larger defects. Renal scars may not be reliably diagnosed by cortical scintigraphy performed within 6 months of UTI because the inflammatory lesions may not have fully resolved. (orig.)

  1. Transient Astrophysics Probe

    Science.gov (United States)

    Camp, Jordan

    2017-08-01

    Transient Astrophysics Probe (TAP), selected by NASA for a funded Concept Study, is a wide-field high-energy transient mission proposed for flight starting in the late 2020s. TAP’s main science goals, called out as Frontier Discovery areas in the 2010 Decadal Survey, are time-domain astrophysics and counterparts of gravitational wave (GW) detections. The mission instruments include unique imaging soft X-ray optics that allow ~500 deg2 FoV in each of four separate modules; a high sensitivity, 1 deg2 FoV soft X-ray telescope based on single crystal silicon optics; a passively cooled, 1 deg2 FoV Infrared telescope with bandpass 0.6-3 micron; and a set of ~8 small NaI gamma-ray detectors. TAP will observe many events per year of X-ray transients related to compact objects, including tidal disruptions of stars, supernova shock breakouts, neutron star bursts and superbursts, and high redshift Gamma-Ray Bursts. Perhaps most exciting is TAP’s capability to observe X-ray and IR counterparts of GWs involving stellar mass black holes detected by LIGO/Virgo, and possibly X-ray counterparts of GWs from supermassive black holes, detected by LISA and Pulsar Timing Arrays.

  2. TIME DOMAIN ANALYSIS OF TRANSIENT PROPAGATION IN INHOMOGENEOUS MAGNETIZED PLASMA USING Z-TRANSFORMS

    Institute of Scientific and Technical Information of China (English)

    Huang Shoujiang; Li Fang

    2006-01-01

    The electromagnetic propagation through an inhomogeneous magnetized plasma slab is studied using the Z-transform formulation of the Finite-Difference Time-Domain(FDTD) method. The direction of electromagnetic propagation is parallel to the biasing magnetic filed. To validate the Z-transform algorithm, the reflection and transmission coefficients for the right-hand circularly polarized wave of the homogeneous magnetized plasma slab are computed by means of discrete Fourier transform. The comparison between the reflection and transmission coefficients of the homogeneous plasma slab and analytical values indicates that Z-transform algorithm is very accurate. When the plasma frequency varies according to the square root and parabolic relations, the reflection and transmission coefficients of the inhomogeneous magnetized plasma slab are computed.

  3. INFLUENCE OF THE TIME OF DISINHIBITION TO TRANSIENTS AND WEAR OF THE FRICTION LININGS IN AN ASYNCHRONOUS MOTOR

    Directory of Open Access Journals (Sweden)

    V. V. Solencov

    2016-01-01

    Full Text Available Time and the stopping distance of the electric drive with frequent starting-and-braking modes that contain embedded asynchronous motor with a recessed combined braking device depend on the moment of an electromagnet disinhibition. At the same time other important criteria are taken into the account, i.e. wear resistance of the brake device and the smoothness of the deceleration of the electric drive. In general such an asynchronous motor contains asynchronous engine with squirrel-cage rotor, electromechanical normally-closed brake, electromagnetical slip clutch and control circuit. The mechanical characteristics of the deceleration of asynchronous motor with recessed combined brake device at different moments of an electromagnet disinhibition are presented. The mathematical model is featured and the transients in such a motor are presented. Formation models for computer research were carried out in the Fortran 2008 programming language. Calculation of the system of differential equations was fulfilled by the Runge – Kutta method. The deceleration of the electromechanical brake at various speeds caused different time values and stopping distances. The plots of stopping distance and the braking time at various moments of an electromagnet disinhibition are demonstrated. The optimum moment of switching on an electromechanical brake, providing small stopping distance and the braking time is the time when the speed wвкл = 0,6–0,8 of the nominal. In this case the acceptable number of brake applications for friction linings (compared with mechanical braking will increase by 1.6–2.8 times. The pilot study confirmed the validity of the obtained mathematical models and discovered patterns.

  4. The starting transient of solid propellant rocket motors with high internal gas velocities. Ph.D. Thesis

    Science.gov (United States)

    Peretz, A.; Caveny, L. H.; Kuo, K. K.; Summerfield, M.

    1973-01-01

    A comprehensive analytical model which considers time and space development of the flow field in solid propellant rocket motors with high volumetric loading density is described. The gas dynamics in the motor chamber is governed by a set of hyperbolic partial differential equations, that are coupled with the ignition and flame spreading events, and with the axial variation of mass addition. The flame spreading rate is calculated by successive heating-to-ignition along the propellant surface. Experimental diagnostic studies have been performed with a rectangular window motor (50 cm grain length, 5 cm burning perimeter and 1 cm hydraulic port diameter), using a controllable head-end gaseous igniter. Tests were conducted with AP composite propellant at port-to-throat area ratios of 2.0, 1.5, 1.2, and 1.06, and head-end pressures from 35 to 70 atm. Calculated pressure transients and flame spreading rates are in very good agreement with those measured in the experimental system.

  5. Limits on the Transient Ultra-High Energy Neutrino Flux from Gamma-Ray Bursts (GRB) Derived from RICE Data

    CERN Document Server

    Hussain, S; al, et

    2006-01-01

    We present limits on ultra-high energy (UHE; E(nu)>1 PeV) neutrino fluxes from gamma-ray bursts (GRB), based on recently presented data, limits, and simulations from the RICE experiment. We use data from five recorded transients with sufficient photon spectral shape and redshift information to derive an expected neutrino flux, assuming that the observed photons are linked to neutrino production through pion decay via the well-known 'Waxman-Bahcall' prescription. Knowing the declination of the observed burst, as well as the RICE sensitivity as a function of polar angle and the previously published non-observation of any neutrino events allows an estimate of the sensitivity to a given neutrino flux. Although several orders of magnitude weaker than the expected fluxes, our GRB neutrino flux limits are nevertheless the first in the PeV--EeV energy regime. For completeness, we also provide a listing of other bursts, recorded at times when the RICE experiment was active, but requiring some assumptions regarding lum...

  6. Discovery of a Long-Lived, High Amplitude Dusty Infrared Transient

    CERN Document Server

    Britt, C T; Green, J D; Jonker, P G; Hynes, R I; Torres, M A P; Strader, J; Chomiuk, L; Salinas, R; Lucas, P; Pena, C Contreras; Kurtev, R; Heinke, C; Smith, L; Wright, N J; Johnson, C; Steeghs, D; Nelemans, G

    2016-01-01

    We report the detection of an infrared selected transient which has lasted at least 5 years, first identified by a large mid-infrared and optical outburst from a faint X-ray source detected with the Chandra X-ray Observatory. In this paper we rule out several scenarios for the cause of this outburst, including a classical nova, a luminous red nova, AGN flaring, a stellar merger, and intermediate luminosity optical transients, and interpret this transient as the result of a Young Stellar Object (YSO) of at least solar mass accreting material from the remains of the dusty envelope from which it formed, in isolation from either a dense complex of cold gas or massive star formation. This object does not fit neatly into other existing categories of large outbursts of YSOs (FU Orionis types) which may be a result of the object's mass, age, and environment. It is also possible that this object is a new type of transient unrelated to YSOs.

  7. Discovery of a long-lived, high-amplitude dusty infrared transient

    Science.gov (United States)

    Britt, C. T.; Maccarone, T. J.; Green, J. D.; Jonker, P. G.; Hynes, R. I.; Torres, M. A. P.; Strader, J.; Chomiuk, L.; Salinas, R.; Lucas, P.; Contreras Peña, C.; Kurtev, R.; Heinke, C.; Smith, L.; Wright, N. J.; Johnson, C.; Steeghs, D.; Nelemans, G.

    2016-08-01

    We report the detection of an infrared-selected transient which has lasted at least five years, first identified by a large mid-infrared and optical outburst from a faint X-ray source detected with the Chandra X-ray Observatory. In this paper we rule out several scenarios for the cause of this outburst, including a classical nova, a luminous red nova, AGN flaring, a stellar merger, and intermediate luminosity optical transients, and interpret this transient as the result of a young stellar object (YSO) of at least solar mass accreting material from the remains of the dusty envelope from which it formed, in isolation from either a dense complex of cold gas or massive star formation. This object does not fit neatly into other existing categories of large outbursts of YSOs (FU Orionis types) which may be a result of the object's mass, age, and environment. It is also possible that this object is a new type of transient unrelated to YSOs.

  8. Analysis Method of Transient Temperature Field for Fuel Tank of High-Altitude Large UAV

    Institute of Scientific and Technical Information of China (English)

    Qing Ai; Liang Chen; Xiaojing Xu; Shiyu Liu; Zhenwen Hu; Xinlin Xia

    2016-01-01

    Based on the analysis of factors affecting transient temperature field of aircraft fuel tank and coupled heat transfer mechanism, a mathematical model of transient coupled heat transfer, including the dynamic change of fuel quality, the internal heat transfer, the external aerodynamic convection and the radiation heat transfer, is established. Taking the aerodynamic convection and radiation heat transfer outside the tank as the third kinds of thermal boundary conditions for the thermal analysis of the fuel tank, calculation of internal and external coupling heat of fuel tank is decoupled. Thermal network method combined with hierarchical dynamic grid is used to deal with the fuel consumption, and carry on the heat transfer analysis of the fuel tank. The numerical method for the transient temperature field of aircraft fuel tank is established. Through the simulation calculation, the transient temperature distribution of the fuel tank under different flight conditions is obtained, and the influence of the fuel mass and the external thermal environment on the temperature field is analyzed.

  9. Transient Voltage Recorder

    Science.gov (United States)

    Medelius, Pedro J. (Inventor); Simpson, Howard J. (Inventor)

    2002-01-01

    A voltage transient recorder can detect lightning induced transient voltages. The recorder detects a lightning induced transient voltage and adjusts input amplifiers to accurately record transient voltage magnitudes. The recorder stores voltage data from numerous monitored channels, or devices. The data is time stamped and can be output in real time, or stored for later retrieval. The transient recorder, in one embodiment, includes an analog-to-digital converter and a voltage threshold detector. When an input voltage exceeds a pre-determined voltage threshold, the recorder stores the incoming voltage magnitude and time of arrival. The recorder also determines if its input amplifier circuits clip the incoming signal or if the incoming signal is too low. If the input data is clipped or too low, the recorder adjusts the gain of the amplifier circuits to accurately acquire subsequent components of the lightning induced transients.

  10. Low Power and Fast Transient High Swing CMOS Telescopic Operational Amplifier

    Directory of Open Access Journals (Sweden)

    Akshay Kumar Kansal

    2015-12-01

    Full Text Available CMOS telescopic operational amplifier with high-swing and high-performance is described in this paper. The swing is attained by using the tail and current source-transistors in deep-linear region. The resultant deprivation in parameters like differential gain, CMRR and added characteristics are recompensed by using regulatedcascode differential gain enhancement and a replica-tail feedback technique. Operating at power supply of 3.3V, the power consumption, slew rate and settling time are improved using transmission controlled pass circuitry and level amplifier. It is shown through simulations that the Op-Amp preserves its high CMRR and unity gain frequency.

  11. Stability, Transient Response, Control, and Safety of a High-Power Electric Grid for Turboelectric Propulsion of Aircraft

    Science.gov (United States)

    Armstrong, Michael; Ross, Christine; Phillips, Danny; Blackwelder, Mark

    2013-01-01

    This document contains the deliverables for the NASA Research and Technology for Aerospace Propulsion Systems (RTAPS) regarding the stability, transient response, control, and safety study for a high power cryogenic turboelectric distributed propulsion (TeDP) system. The objective of this research effort is to enumerate, characterize, and evaluate the critical issues facing the development of the N3-X concept aircraft. This includes the proposal of electrical grid architecture concepts and an evaluation of any needs for energy storage.

  12. The Effect of Transient Students' Scores on the Norm of One High School's Standardized Basic Skills Test Battery.

    Science.gov (United States)

    Hill, Carolyn Stevens

    The effect of the standardized test scores of transient students on the mean of the 9th, 10th, and 11th grade standardized test scores of a school was studied. The groups used in the study were grades 9, 10, and 11 at a new high school in Clarksburg (West Virginia). The study was conducted in the spring of 1998. Groups consisted of 204 9th…

  13. Computed tomography perfusion imaging may predict cognitive impairment in patients with first-time anterior circulation transient ischemic attack.

    Science.gov (United States)

    Wang, Jun; Li, Yunming; Zheng, Bo; Wang, Jian; Wang, Zhiqiang; Duan, Dan; Li, Yuxia; Wang, Qingsong

    2016-04-01

    To determine whether computed tomography perfusion imaging (CTPI)-derived parameters are associated with vascular cognitive impairment (VCI) in patients with transient ischemic attack (TIA). Patients with first-time anterior circulation TIA (diagnosed within 24 h of onset) and normal cognition, treated between August 2009 and August 2014 at the Department of Neurology of Chengdu Military General Hospital, China, were analyzed retrospectively. Patients underwent whole-brain CTPI within 1 week of TIA to detect cerebral blood volume (CBV), cerebral blood flow (CBF), mean transit time (MTT) and time to peak (TTP) in the ischemic region. Based on cognitive function assessment 4 weeks after TIA, using the Montreal cognitive assessment (MoCA) and mini mental state examination, the patients were divided into control and VCI groups. CTPI parameters and other clinical data were compared between groups, and Spearman's correlation analysis used to identify associations between cognitive scores and CTPI parameters in the VCI group. 50 patients (25 per group; aged 55-72 years) were included. Patient age, gender, smoking status, alcohol consumption, educational level, time from TIA onset to admission, time from TIA onset to CTPI, and prevalence of hypertension, diabetes mellitus, hyperlipidemia, atrial fibrillation and hyperhomocysteinemia did not differ between groups. Both groups showed TTP and MTT prolongation, CBF reduction, but no change in CBV in the ischemic region; these changes were significantly larger in the VCI group (P < 0.05). MTT correlated negatively with MoCA score (r = -0.51, P = 0.009). CTPI could facilitate early diagnosis of VCI in patients with anterior circulation TIA.

  14. Timing and spectral studies of the transient X-ray pulsar GX 304-1 during an outburst

    CERN Document Server

    Devasia, Jincy; Paul, Biswajit; Indulekha, Kavila

    2011-01-01

    We present the timing and spectral properties of the transient X-ray pulsar GX 304-1 during its recent outburst in 2010 August, using observations carried out with the Proportional Counter Array (PCA) instrument on-board the Rossi X-ray Timing Explorer (RXTE) satellite. We detected strong intensity and energy dependent variations in the pulse profiles during the outburst. The pulse profile showed significant evolution over the outburst. It showed complex structures consisting of a main peak with steps on both sides during the start of the outburst. On some days, a sharp dip like feature was seen which disappeared at the end of the outburst; when the profile evolved into a sinusoidal shape. At low energies, the pulse profiles appeared complex, consisting of multiple peaks and a narrow minimum. The amplitude of the second brightest peak in low energies decreased with energy, and above 12 keV, the shape of the pulse profile changed to a single broad peak with a dip like feature. The dip had energy dependence, bo...

  15. Transient anhedonia phenotype and altered circadian timing of behaviour during night-time dim light exposure in Per3−/− mice, but not wildtype mice

    Science.gov (United States)

    Martynhak, Bruno Jacson; Hogben, Alexandra L.; Zanos, Panos; Georgiou, Polymnia; Andreatini, Roberto; Kitchen, Ian; Archer, Simon N.; von Schantz, Malcolm; Bailey, Alexis; van der Veen, Daan R.

    2017-01-01

    Industrialisation greatly increased human night-time exposure to artificial light, which in animal models is a known cause of depressive phenotypes. Whilst many of these phenotypes are ‘direct’ effects of light on affect, an ‘indirect’ pathway via altered sleep-wake timing has been suggested. We have previously shown that the Period3 gene, which forms part of the biological clock, is associated with altered sleep-wake patterns in response to light. Here, we show that both wild-type and Per3−/− mice showed elevated levels of circulating corticosterone and increased hippocampal Bdnf expression after 3 weeks of exposure to dim light at night, but only mice deficient for the PERIOD3 protein (Per3−/−) exhibited a transient anhedonia-like phenotype, observed as reduced sucrose preference, in weeks 2–3 of dim light at night, whereas WT mice did not. Per3−/− mice also exhibited a significantly smaller delay in behavioural timing than WT mice during weeks 1, 2 and 4 of dim light at night exposure. When treated with imipramine, neither Per3−/− nor WT mice exhibited an anhedonia-like phenotype, and neither genotypes exhibited a delay in behavioural timing in responses to dLAN. While the association between both Per3−/− phenotypes remains unclear, both are alleviated by imipramine treatment during dim night-time light. PMID:28071711

  16. High-Accuracy Pneumatic Position Control by Applying Nonlinear Control and Arranging Transient Process

    Institute of Scientific and Technical Information of China (English)

    WANG Yan-bo; BAO Gang

    2008-01-01

    By applying a nonlinear control and arranging a transient process, the initiative error of the pneumatic servo positioning system is reduced largely, and a larger gain of the controller is used to improve the responding speed of the system at the same damping ratio. Therefore, a compromise is made among the responding speed, overshoot, robustness, adaptability and stability. In addition, a dynamic output feedback controller, including position velocity and acceleration (PVA) feedback, is designed to improve the performance of the system. And a nonlinear controller is reconstructed based on the linear output feedback controller to decrease noises and disturbances. The dynamic responses of the system are simulated and tested. Results show that the error is kept within 0.02 mm under different mass loads and the positioning transient process is smooth, without overshoot and speedy.

  17. A High Temperature Experimental Characterization Procedure for Oxide-Based Thermoelectric Generator Modules under Transient Conditions

    DEFF Research Database (Denmark)

    Man, Elena Anamaria; Schaltz, Erik; Rosendahl, Lasse

    2015-01-01

    to 1000 °C with a load variation range value between [0.22 – 8.13] Ω. A total of ten thermocouples are placed in the setup with the purpose of measuring the temperature in specific points between the heater and the heat sink. Based on the readings, the temperature on the hot and cold side of the modules...... will be shown during the transient and steady-state thermal conditions....

  18. Time of flight mass spectrometry for quantitative data analysis in fast transient studies using a Temporal Analysis of Products (TAP) reactor.

    Science.gov (United States)

    Goguet, Alexandre; Hardacre, Christopher; Maguire, Noleen; Morgan, Kevin; Shekhtman, Sergiy O; Thompson, Steve P

    2011-01-07

    A Time of flight (ToF) mass spectrometer suitable in terms of sensitivity, detector response and time resolution, for application in fast transient Temporal Analysis of Products (TAP) kinetic catalyst characterization is reported. Technical difficulties associated with such application as well as the solutions implemented in terms of adaptations of the ToF apparatus are discussed. The performance of the ToF was validated and the full linearity of the specific detector over the full dynamic range was explored in order to ensure its applicability for the TAP application. The reported TAP-ToF setup is the first system that achieves the high level of sensitivity allowing monitoring of the full 0-200 AMU range simultaneously with sub-millisecond time resolution. In this new setup, the high sensitivity allows the use of low intensity pulses ensuring that transport through the reactor occurs in the Knudsen diffusion regime and that the data can, therefore, be fully analysed using the reported theoretical TAP models and data processing.

  19. Analysis of transient deformation and pre-seismic strain anomalies in SW Taiwan by time series of continuous GPS and PS-InSAR

    Science.gov (United States)

    Min-Chien, Tsai

    2017-04-01

    The high precision Global Navigation Satellite System (GNSS) survey technique provides an efficient tool to study active tectonics and geodynamics. The data of more than 400 cGPS stations are processed with the GAMIT/GLOBK 10.6 software. After strictly data control, time series analysis, noise analysis, and common-mode error correction, we can drive a more realistic interseismic ITRF2008 velocity field Taiwan area. This result not only provides high precision GPS data for all of GPS or other users, also can be a basis for the crustal strain rate estimation and analysis of GPS baseline variation. The 2016 Meinong earthquake is the most deadly earthquake occurred in Taiwan after the 1999 Chichi earthquake. This project will focus on characterizing high strain anomalies and transient deformation from time series analysis of cGPS and PS-INSAR to assess the seismic hazards and potential active structures in the SW Taiwan area in terms of the temporal and spatial strain variations.

  20. The complex Young's modulus of skeletal muscle fibre segments in the high frequency range determined from tension transients.

    Science.gov (United States)

    De Winkel, M E; Blangé, T; Treijtel, B W

    1993-06-01

    Stiffness measurements of muscle fibres are often based on application of a length change at one end of the muscle fibre and recording of the following tension change at the other end. In this study a method is developed to determine in the high frequency range (up to 40 kHz) the complex Young's modulus of skeletal muscle fibre as a function of frequency from the tension transient, following a rapid stepwise length change completed within 40 microseconds. For this purpose both a new mechanical moving part of the displacement generating system and a force transducer with a high natural frequency (70 kHz) had to be developed. In addition to stiffness measurements of a silk fibre to test the displacement generating system and the method of analysis, stiffness of skeletal muscle fibres in relaxed and rigor state have been measured. The complex Young's moduli of relaxed muscle fibres as well as muscle fibres in rigor state are frequency dependent. In both cases the complex Young's modulus increases smoothly with increasing frequency over a range of 250 Hz up to 40 kHz. The phase angles of the responses remained almost constant at a value of 0.3 radians for a fibre in rigor and 0.6 radians for a relaxed fibre. This leads to the conclusion that for muscle fibres in rigor state the recovery in the tension response to a step length change shows a continuous distribution of relaxation times rather than a few discrete ones. Results of our stiffness measurements are compared with results obtained from current viscoelastic models used to describe stiffness of muscle fibre in this frequency range.(ABSTRACT TRUNCATED AT 250 WORDS)

  1. Self-rated social skills predict visual perception: impairments in object discrimination requiring transient attention associated with high autistic tendency.

    Science.gov (United States)

    Laycock, Robin; Cross, Alana Jade; Dalle Nogare, Felicity; Crewther, Sheila Gillard

    2014-02-01

    Autism is usually defined by impairments in the social domain but has also been linked to deficient dorsal visual stream processing. However, inconsistent findings make the nature of this relationship unclear and thus, we examined the role of stimulus-driven transient attention, presumably activated by the dorsal stream in autistic tendency. Contrast thresholds for object discrimination were compared between groups with high and low self-rated autistic tendency utilizing the socially based Autism Spectrum Quotient (AQ). Visual stimuli were presented with either abrupt or with ramped contrast onsets/offsets in order to manipulate the demands of transient attention. Larger impairments in performance of abrupt compared with ramped object presentation were established in the high AQ group. Furthermore, self-reported social skills predicted abrupt task performance, suggesting an important visual perception deficiency in autism-related traits. Autism spectrum disorder may be associated with reduced utilization of the dorsal stream to rapidly activate attention prior to ventral stream processing when stimuli are transient. © 2013 International Society for Autism Research, Wiley Periodicals, Inc.

  2. Transient age distributions in subsurface hydrologic systems

    Science.gov (United States)

    Engdahl, Nicholas B.; McCallum, James L.; Massoudieh, Arash

    2016-12-01

    Transient age distributions have received relatively little attention in the literature over the years compared to their steady-state counterparts. All natural systems are transient given enough time and it is becoming increasingly clear that understanding these effects and how they deviate from steady conditions will be important in the future. This article provides a high-level overview of the equations, techniques, and challenges encountered when considering transient age distributions. The age distribution represents the amount of water in a sample belonging to a particular age and the transient case implies that sampling the same location at two different times will result in different age distributions. These changes may be caused by transience in the boundary conditions, forcings (inputs), or physical changes in the geometry of the flow system. The governing equation for these problems contains separate dimensions for age and time and its solutions are more involved than the solute transport or steady-state age equations. Despite the complexity, many solutions have been derived for simplified, but transient, approximations and several numerical techniques exist for modeling more complex transient age distributions. This paper presents an overview of the existing solutions and contributes new examples of transient characteristic solutions and transient particle tracking simulations. The limitations for applying the techniques described herein are no longer theoretical or technological, but are now dominated by uncertainty in the physical properties of the flow systems and the lack of data for the historic inputs.

  3. Spectral and timing evolution of the bright failed outburst of the transient black hole Swift J174510.8-262411

    CERN Document Server

    Del Santo, M; Tomsick, J A; Sbarufatti, B; Bel, M Cadolle; Casella, P; Castro-Tirado, A; Corbel, S; Grinberg, V; Homan, J; Kalemci, E; Motta, S; Munoz-Darias, T; Pottschmidt, K; Rodriguez, J; Wilms, J

    2015-01-01

    We studied time variability and spectral evolution of the Galactic black hole transient Swift J174510.8-262411 during the first phase of its outburst. INTEGRAL and Swift observations collected from 2012 September 16 until October 30 have been used. The total squared fractional rms values did not drop below 5% and QPOs, when present, were type-C, indicating that the source never made the transition to the soft-intermediate state. Even though the source was very bright (up to 1 Crab in hard X-rays), it showed a so called failed outburst as it never reached the soft state. XRT and IBIS broad band spectra, well represented by a hybrid thermal/non-thermalComptonisationmodel, showed physical parameters characteristic of the hard and intermediate states. In particular, the derived temperature of the geometrically thin disc black body was about 0.6 keV at maximum.We found a clear decline of the optical depth of the corona electrons (close to values of 0.1), as well as of the total compactness ratio lh/ls. The hard-to...

  4. Neocortical prodynorphin expression is transiently increased with learning: Implications for time- and learning-dependent neocortical kappa opioid receptor activation.

    Science.gov (United States)

    Loh, Ryan; Collins, Sean; Galvez, Roberto

    2017-09-29

    There are several lines of evidence that indicate a prominent role for the opioid system in the acquisition and consolidation of learned associations. Specifically, kappa opioid receptor (KOR) modulation has been demonstrated to alter various behavioral tasks including whisker trace eyeblink conditioning (WTEB). WTEB is an associative conditioning paradigm in which a neutral conditioned stimulus (CS; Whisker stimulation) is paired following a short stimulus free trace interval with a salient unconditioned stimulus that elicits a blink response (US; Eye shock). Work from our laboratory has shown that WTEB conditioning is dependent upon and induces plasticity in primary somatosensory cortex (S1), a likely site for memory storage. Our subsequent studies have shown that WTEB acquisition or consolidation are impaired when the initial or later phase of KOR activation in S1 is respectively blocked. Interestingly, this mechanism by which KOR is activated in S1 during learning remains unexplored. Dynorphin (DYN), KOR's endogenous ligand, is synthesized from the precursor prodynorphin (PD) that is synthesized from preprodynorphin (PPD). In S1, most PPD is found in inhibitory GABAergic somatostatin interneurons (SOM), suggesting that these SOM interneurons are upstream regulators of learning induced KOR activation. Using immunofluorescence to investigate the expression of PD and SOM, the current study found that PD/SOM expression was transiently increased in S1 during learning. Interestingly, these findings have direct implications towards a time- and learning-dependent role for KOR activation in neocortical mechanisms mediating learning. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Laboratory Experiments of Roughness Effects on the Lateral Surface Transient Storage Mean Residence Time in Small Streams

    Science.gov (United States)

    Jackson, T. R.; Haggerty, R.; Apte, S. V.; Budwig, R.; Tonina, D.

    2012-12-01

    Lateral surface transient storage (LSTS) zones are common in riverine systems. The higher mean residence times (MRTs) associated with LSTS recirculation impact water quality and solute transport. We are working to develop a predictive model of LSTS MRT based on parameters easily measured in the field. We investigated the effect of streambed roughness and LSTS shape (a lateral roughness) on MRT. We performed 9 laboratory experiments spanning roughness conditions and LSTS shapes that are based on shapes observed in natural streams. The three streambed roughness conditions were: (1) a smooth flume with a 15-cm depth; (2) a uniformly rough flume with 5-cm gravels 1-particle thick in the main channel and finer sand in the LSTS at 15-cm depth; and (3) a uniformly rough flume at 30-cm depth. We collected data on: (1) entrainment velocities at the LSTS entrance using stereo particle image velocimetry; (2) velocity and turbulence quantities along a horizontal plane in the LSTS with an acoustic Doppler velocimeter; and (3) MRT with salt injection experiments and electrical conductivity probes. Preliminary results from the experiments will be presented, and resulting insights into the predictive relationship.

  6. Response of the hyporheic zone to transient groundwater fluctuations on the annual and storm event time scales

    Science.gov (United States)

    Malzone, Jonathan M.; Lowry, Christopher S.; Ward, Adam S.

    2016-07-01

    The volume of the water stored in and exchanged with the hyporheic zone is an important factor in stream metabolism and biogeochemical cycling. Previous studies have identified groundwater direction and magnitude as one key control on the volume of the hyporheic zone, suggesting that fluctuation in the riparian water table could induce large changes under certain seasonal conditions. In this study, we analyze the transient drivers that control the volume of the hyporheic zone by coupling the Brinkman-Darcy equation to the Navier-Stokes equations to simulate annual and storm induced groundwater fluctuations. The expansion and contraction of the hyporheic zone was quantified based on temporally dynamic scenarios simulating annual groundwater fluctuations in a humid temperate climate. The amplitude of the groundwater signal was varied between scenarios to represent a range of annual hydrologic forcing. Storm scenarios were then superimposed on the annual scenario to simulate the response to short-term storm signals. Simulations used two different groundwater storm responses; one in-phase with the surface water response and one 14 h out-of-phase with the surface water response to represent our observed site conditions. Results show that annual groundwater fluctuation is a dominant control on the volume of the hyporheic zone, where increasing groundwater fluctuation increases the amount of annual variation. Storm responses depended on the antecedent conditions determined by annual scenarios, where the time of year dictated the duration and magnitude of the storm induced response of the hyporheic zone.

  7. A High-Temperature Transient Hot-Wire Thermal Conductivity Apparatus for Fluids

    OpenAIRE

    Perkins, R. A.; Roder, H. M.; Nieto de Castro, C. A.

    1991-01-01

    A new apparatus for measuring both the thermal conductivity and thermal diffusivity of fluids at temperatures from 220 to 775 K at pressures to 70 MPa is described. The instrument is based on the step-power-forced transient hot-wire technique. Two hot wires are arranged in different arms of a Wheatstone bridge such that the response of the shorter compensating wire is subtracted from the response of the primary wire. Both hot wires are 12.7 µm diameter platinum wire and are simultaneously use...

  8. REAL-TIME EMISSION CHARACTERIZATION OF ORGANIC AIR TOXIC POLLUTANTS DURING STEADY STATE AND TRANSIENT OPERATION OF A MEDIUM DUTY DIESEL ENGINE

    Science.gov (United States)

    An on-line monitoring method, jet resonance-enhanced multi-photon ionization (REMPI) with time-of-flight mass spectrometry (TOFMS) was used to measure emissions of organic air toxics from a medium-duty (60 kW)diesel generator during transient and steady state operations. Emission...

  9. Electronic Excited State and Vibrational Dynamics of Water Solution of Cytosine Observed by Time-resolved Transient Absorption Spectroscopy with Sub-10fs Deep Ultraviolet Laser Pules

    Directory of Open Access Journals (Sweden)

    Kobayashi Takayoshi.

    2013-03-01

    Full Text Available Time-resolved transient absorption spectroscopy for water solution of cytosine with sub-10fs deep ultraviolet laser pulse is reported. Ultrafast electronic excited state dynamics and coherent molecular vibrational dynamics are simultaneously observed and their relaxation mechanisms are discussed.

  10. Therapeutic time window of flurbiprofen axetil's neuroprotective effect in a rat model of transient focal cerebral ischemia

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Background The neuroprotective effect of the cyclooxygenase (COX) inhibitor has been demonstrated in acute and chronic neurodegenerative processes. But its function under cerebral ischemic conditions is unclear. This study was designed to evaluate the neuroprotective efficacy of emulsified flurbiprofen axetil (FA, COX inhibitor) and its therapeutic time window in a model of transient middle cerebral artery occlusion (MCAO) in rats. Methods Forty-eight male SD rats were randomly assigned into six groups (n=8 in each group); three FA groups, vehicle, sham and ischemia/reperfusion (I/R) groups. Three doses of FA (5, 10 or 20 mg/kg, intravenous infusion) were administered just after cerebral ischemia/reperfusion (I/R). The degree of neurological outcome was measured by the neurologic deficit score (NDS) at 24, 48 and 72 hours after I/R. Mean brain infarct volume percentage (MBIVP) was determined with 2,3,5-triphenyltetrazolium chloride (TTC) staining at 72 hours after I/R. In three other groups (n=8 in each group), the selected dosage of 10 mg/kg was administrated intravenously at 6, 12 and 24 hours after I/R. Results The three different doses of FA improved NDS at 24, 48 and 72 hours after I/R and significantly reduced MBIVP. However, the degree of MBIVP in the FA 20 mg/kg group differed from that in FA 10 mg/kg group. Of interest is the finding that the neuroprotective effect conferred by 10 mg/kg of FA was also observed when treatment was delayed until 12-24 hours after ischemia reperfusion. Conclusion COX inhibitor FA is a promising therapeutic strategy for cerebral ischemia and its therapeutic time window could last for 12--24 hours after cerebral ischemia reperfusion, which would help in lessening the initial ischemic brain damage.

  11. Numerical modeling of the 2D time-domain transient electromagnetic secondary field of the line source of the current excitation

    Science.gov (United States)

    Liu, Yun; Wang, Xu-Ben; Wang, Yun

    2013-06-01

    To effectively minimize the electromagnetic field response in the total field solution, we propose a numerical modeling method for the two-dimensional (2D) timedomain transient electromagnetic secondary field of the line source based on the DuFort-Frankel finite-difference method. In the proposed method, we included the treatment of the earth-air boundary conductivity, calculated the normalized partial derivative of the induced electromotive force (Emf), and determined the forward time step. By extending upward the earth-air interface to the air grid nodes and the zero-value boundary conditions, not only we have a method that is more efficient but also simpler than the total field solution. We computed and analyzed the homogeneous half-space model and the flat layered model with high precision—the maximum relative error is less than 0.01% between our method and the analytical method—and the solution speed is roughly three times faster than the total-field solution. Lastly, we used the model of a thin body embedded in a homogeneous half-space at different delay times to depict the downward and upward spreading characteristics of the induced eddy current, and the physical interaction processes between the electromagnetic field and the underground low-resistivity body.

  12. Coulomb time delays in high harmonic generation

    CERN Document Server

    Smirnova, Olga

    2016-01-01

    Measuring the time it takes to remove an electron from an atom or molecule during photoionization using newly developed attosecond spectroscopies has been a focus of many recent experiments. However, the outcome of such measurement depends on measurement protocols and specific observables available in each particular experiment. One of such protocols relies on high harmonic generation. First, we derive rigorous and general expressions for ionization and recombination times in high harmonic generation experiments. We show that these times are different from, but related to ionization times measured in photo-electron spectroscopy, i.e. using attosecond streak camera, RABBITT and atto-clock methods. Second, we use the Analytical R-Matrix theory (ARM) to calculate these times and compare them with experimental values.

  13. Coulomb time delays in high harmonic generation

    Science.gov (United States)

    Torlina, Lisa; Smirnova, Olga

    2017-02-01

    Measuring the time it takes to remove an electron from an atom or molecule during photoionization has been the focus of a number of recent experiments using newly developed attosecond spectroscopies. The interpretation of such measurements, however, depends critically on the measurement protocol and the specific observables available in each experiment. One such protocol relies on high harmonic generation. In this paper, we derive rigorous and general expressions for ionisation and recombination times in high harmonic generation experiments. We show that these times are different from, but related to, ionisation times measured in photoelectron spectroscopy: that is, those obtained using the attosecond streak camera, RABBITT and attoclock methods. We then proceed to use the analytical R-matrix theory to calculate these times and compare them with experimental values.

  14. The Rapid Transient Surveyor

    Science.gov (United States)

    Baranec, Christoph; Tonry, John; Wright, Shelley; Tully, R. Brent; Lu, Jessica R.; Takamiya, Marianne Y.; Hunter, Lisa

    2016-01-01

    The next decade of astronomy will be dominated by large area surveys (see the detailed discussion in the Astro-2010 Decadal survey and NRC's recent OIR System Report). Ground-based optical transient surveys, e.g., LSST, ZTF and ATLAS and space-based exoplanet, supernova, and lensing surveys such as TESS and WFIRST will join the Gaia all-sky astrometric survey in producing a flood of data that will enable leaps in our understanding of the universe. There is a critical need for further characterization of these discoveries through high angular resolution images, deeper images, spectra, or observations at different cadences or periods than the main surveys. Such follow-up characterization must be well matched to the particular surveys, and requires sufficient additional observing resources and time to cover the extensive number of targets.We describe plans for the Rapid Transient Surveyor (RTS), a permanently mounted, rapid-response, high-cadence facility for follow-up characterization of transient objects on the U. of Hawai'i 2.2-m telescope on Maunakea. RTS will comprise an improved robotic laser adaptive optics system, based on the prototype Robo-AO system (formerly at the Palomar 1.5-m and now at the Kitt Peak 2.2-m telescope), with simultaneous visible and near-infrared imagers as well as a near-infrared integral field spectrograph (R~100, λ = 850 - 1830 nm, 0.15″ spaxels, 8.7″×6.0″ FoV). RTS will achieve an acuity of ~0.07″ in visible wavelengths and automated detection and characterization of astrophysical transients during a sustained observing campaign will yield the necessary statistics to precisely map dark matter in the local universe.

  15. Hydrochemical Denudation and Transient Carbon Dioxide Drawdown in the Highly Glacierized, Shrinking Koxkar Basin, China

    Directory of Open Access Journals (Sweden)

    Jian Wang

    2016-01-01

    covered by present-day ice. From 27 June to 30 September 2011, the total runoff depth was 671.70 mm, which yielded crustal solute fluxes of 213.65 ± 10.05 kg·(km2·d−1 that accounted for 53.59% of the total solute flux of the river water. The solute fluxes derived directly from ice meltwater and precipitation were 70.02 ± 4.68 and 16.57 ± 1.13 kg·(km2·d−1, respectively, which accounted for 17.57% and 4.16% of the total solute flux. The carbonation and hydrolysis of carbonate and feldspar minerals occurred because of the presence of H+, supplied by sulfide oxidation or CO2 drawdown. While the H+ yielded by sulfide oxidation was insufficient for hydrochemical reactions, atmospheric CO2 dissolved in the water generated H+ that drove follow-up reactions. The total transient drawdown of CO2 was 804.83 t C, which generated 39.61% of the total HCO3- and 24.68% of the river water solute. Transient drawdown of CO2 in the glacier region indicated that change of glacial area and volume could influence atmospheric CO2 concentration and be important in the long-term global CO2 cycle.

  16. A High-Temperature Transient Hot-Wire Thermal Conductivity Apparatus for Fluids.

    Science.gov (United States)

    Perkins, R A; Roder, H M; Nieto de Castro, C A

    1991-01-01

    A new apparatus for measuring both the thermal conductivity and thermal diffusivity of fluids at temperatures from 220 to 775 K at pressures to 70 MPa is described. The instrument is based on the step-power-forced transient hot-wire technique. Two hot wires are arranged in different arms of a Wheatstone bridge such that the response of the shorter compensating wire is subtracted from the response of the primary wire. Both hot wires are 12.7 µm diameter platinum wire and are simultaneously used as electrical heat sources and as resistance thermometers. A microcomputer controls bridge nulling, applies the power pulse, monitors the bridge response, and stores the results. Performance of the instrument was verified with measurements on liquid toluene as well as argon and nitrogen gas. In particular, new data for the thermal conductivity of liquid toluene near the saturation line, between 298 and 550 K, are presented. These new data can be used to illustrate the importance of radiative heat transfer in transient hot-wire measurements. Thermal conductivity data for liquid toluene, which are corrected for radiation, are reported. The precision of the thermal conductivity data is ± 0.3% and the accuracy is about ±1%. The accuracy of the thermal diffusivity data is about ± 5%. From the measured thermal conductivity and thermal diffusivity, we can calculate the specific heat, Cp , of the fluid, provided that the density is measured, or available through an equation of state.

  17. OLEDs under high current densities. Transient electroluminescence turn-on peaks and singlet-triplet quenching

    Energy Technology Data Exchange (ETDEWEB)

    Kasemann, Daniel

    2012-02-27

    This work focuses on a better understanding of the behavior of organic light emitting devices (OLEDs) under intense electrical excitation. Attaining high exciton densities in organic semiconductors by electrical excitation is of special interest for the field of organic semiconductor lasers (OSLs). In these devices, the high singlet exciton density needed in the active layer to obtain population inversion is easily created by pulsed optical pumping, but direct electrical pumping has not been achieved yet. First, the steps necessary to achieve stable high current densities in organic semiconductors are discussed. After determining the optimal excitation scheme using single p-doped transport layers, the device complexity is increased up to full p-i-n OLEDs with their power dependent emission spectra. For this purpose, two exemplary emitter systems are chosen: the fluorescent laser dye 4-dicyanomethylene-2-methyl-6-p-dimethylaminostyryl-4H-pyran (DCM) doped into Aluminum(III)bis (2-methyl-8-quinolinato)-4-phenylphenolate (Alq{sub 3}) and the efficient phosphorescent emitter system N,N'-di(naphthalen-1-yl)-N,N'-diphenyl-benzidine (alpha-NPD) doped by Iridium(III) bis(2-methyl-dibenzo[f,h]quinoxaline)(acetylacetonate) (Ir(MDQ){sub 2}(acac)). For pulsed excitation using 50 ns pulses and a repetition rate of 1 kHz, single 100 nm thin p- and n-doped transport layers sustain current densities of over 6 kA/cm{sup 2}. While the maximum current density decreases with increasing device thickness, the full OLEDs still sustain current densities beyond 800 A/cm{sup 2} and exhibit a continuously increasing emission intensity with increasing input power. Next, the time-resolved emission behavior of the singlet and triplet emitter device at high excitation densities is analyzed on the nanosecond scale. Here, the peak emission intensity of the phosphorescent emitter system is found to be more than eight times lower than for the singlet emitter system at comparable current

  18. Effects of aspirin on risk and severity of early recurrent stroke after transient ischaemic attack and ischaemic stroke : time-course analysis of randomised trials

    NARCIS (Netherlands)

    Rothwell, Peter M; Algra, Ale; Chen, Zhengming; Diener, Hans-Christoph; Norrving, Bo; Mehta, Ziyah

    2016-01-01

    BACKGROUND: Aspirin is recommended for secondary prevention after transient ischaemic attack (TIA) or ischaemic stroke on the basis of trials showing a 13% reduction in long-term risk of recurrent stroke. However, the risk of major stroke is very high for only the first few days after TIA and minor

  19. Effects of aspirin on risk and severity of early recurrent stroke after transient ischaemic attack and ischaemic stroke : time-course analysis of randomised trials

    NARCIS (Netherlands)

    Rothwell, Peter M; Algra, Ale; Chen, Zhengming; Diener, Hans-Christoph; Norrving, Bo; Mehta, Ziyah

    2016-01-01

    BACKGROUND: Aspirin is recommended for secondary prevention after transient ischaemic attack (TIA) or ischaemic stroke on the basis of trials showing a 13% reduction in long-term risk of recurrent stroke. However, the risk of major stroke is very high for only the first few days after TIA and minor

  20. Hot flush frequency and severity at baseline as predictors of time to transient and stable treatment success: pooled analysis of two CE/BZA studies.

    Science.gov (United States)

    Pinkerton, JoAnn V; Bushmakin, Andrew G; Bobula, Joel; Lavenberg, Joanne; Komm, Barry S; Abraham, Lucy

    2017-06-26

    To evaluate the impact of baseline hot flush frequency and severity on time to symptom improvement during treatment with conjugated estrogens/bazedoxifene (CE/BZA). Data were pooled through week 12 from two randomized placebo-controlled trials (SMART-1 and SMART-2) of nonhysterectomized postmenopausal women with hot flushes treated with CE 0.45 mg/BZA 20 mg or CE 0.625 mg/BZA 20 mg. Time to transient and stable improvement (≥ 50% reduction in hot flush frequency/severity) was estimated using nonparametric models. Transient improvement in hot flush frequency occurred earlier in women treated with CE 0.45 mg/BZA 20 mg with less frequent versus more frequent baseline hot flushes per day: median time to transient improvement was 2, 7, and 11 days for women with CE 0.625 mg/BZA 20 mg treatment, though improvement occurred a few days earlier than with CE 0.45 mg/BZA 20 mg. Women with more frequent/severe hot flushes take longer to achieve transient improvements with CE/BZA and should be encouraged to continue treatment, as it may take longer than a few weeks to achieve significant improvement.

  1. Precision timing measurements for high energy photons

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Dustin, E-mail: djanders@caltech.edu [California Institute of Technology, 1200 E California Blvd, Pasadena, CA 91125 (United States); Apreysan, Artur; Bornheim, Adi; Duarte, Javier; Newman, Harvey; Pena, Cristian [California Institute of Technology, 1200 E California Blvd, Pasadena, CA 91125 (United States); Ronzhin, Anatoly [Fermi National Accelerator Laboratory, P.O. Box 500, Batavia, IL 60510 (United States); Spiropulu, Maria; Trevor, Jason; Xie, Si; Zhu, Ren-Yuan [California Institute of Technology, 1200 E California Blvd, Pasadena, CA 91125 (United States)

    2015-07-01

    Particle colliders operating at high luminosities present challenging environments for high energy physics event reconstruction and analysis. We discuss how timing information, with a precision on the order of 10 ps, can aid in the reconstruction of physics events under such conditions. We present calorimeter based timing measurements from test beam experiments in which we explore the ultimate timing precision achievable for high energy photons or electrons of 10 GeV and above. Using a prototype calorimeter consisting of a 1.7×1.7×1.7 cm{sup 3} lutetium–yttrium oxyortho-silicate (LYSO) crystal cube, read out by micro-channel plate photomultipliers, we demonstrate a time resolution of 33.5±2.1 ps for an incoming beam energy of 32 GeV. In a second measurement, using a 2.5×2.5×20 cm{sup 3} LYSO crystal placed perpendicularly to the electron beam, we achieve a time resolution of 59±11 ps using a beam energy of 4 GeV. We also present timing measurements made using a shashlik-style calorimeter cell made of LYSO and tungsten plates, and demonstrate that the apparatus achieves a time resolution of 54±5 ps for an incoming beam energy of 32 GeV.

  2. Precision timing measurements for high energy photons

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Dustin [California Inst. of Technology (CalTech), Pasadena, CA (United States); Apreysan, Artur [California Inst. of Technology (CalTech), Pasadena, CA (United States); Bornheim, Adi [California Inst. of Technology (CalTech), Pasadena, CA (United States); Duarte, Javier [California Inst. of Technology (CalTech), Pasadena, CA (United States); Newman, Harvey [California Inst. of Technology (CalTech), Pasadena, CA (United States); Pena, Cristian [California Inst. of Technology (CalTech), Pasadena, CA (United States); Ronzhin, Anatoly [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Spiropulu, Maria [California Inst. of Technology (CalTech), Pasadena, CA (United States); Trevor, Jason [California Inst. of Technology (CalTech), Pasadena, CA (United States); Xie, Si [California Inst. of Technology (CalTech), Pasadena, CA (United States); Zhu, Ren-Yuan [California Inst. of Technology (CalTech), Pasadena, CA (United States)

    2014-11-21

    Particle colliders operating at high luminosities present challenging environments for high energy physics event reconstruction and analysis. We discuss how timing information, with a precision on the order of 10 ps, can aid in the reconstruction of physics events under such conditions. We present calorimeter based timing measurements from test beam experiments in which we explore the ultimate timing precision achievable for high energy photons or electrons of 10 GeV and above. Using a prototype calorimeter consisting of a 1.7×1.7×1.7 cm3 lutetium–yttrium oxyortho-silicate (LYSO) crystal cube, read out by micro-channel plate photomultipliers, we demonstrate a time resolution of 33.5±2.1 ps for an incoming beam energy of 32 GeV. In a second measurement, using a 2.5×2.5×20 cm3 LYSO crystal placed perpendicularly to the electron beam, we achieve a time resolution of 59±11 ps using a beam energy of 4 GeV. We also present timing measurements made using a shashlik-style calorimeter cell made of LYSO and tungsten plates, and demonstrate that the apparatus achieves a time resolution of 54±5 ps for an incoming beam energy of 32 GeV.

  3. The Zwicky Transient Facility

    CERN Document Server

    Bellm, Eric C

    2014-01-01

    The Zwicky Transient Facility (ZTF) is a next-generation optical synoptic survey that builds on the experience and infrastructure of the Palomar Transient Factory (PTF). Using a new 47 deg$^2$ survey camera, ZTF will survey more than an order of magnitude faster than PTF to discover rare transients and variables. I describe the survey and the camera design. Searches for young supernovae, fast transients, counterparts to gravitational-wave detections, and rare variables will benefit from ZTF's high cadence, wide area survey.

  4. Verification of high-order mixed FEM solution of transient Magnetic diffusion problems

    Energy Technology Data Exchange (ETDEWEB)

    Rieben, R; White, D A

    2005-05-12

    We develop and present high order mixed finite element discretizations of the time dependent electromagnetic diffusion equations for solving eddy current problems on 3D unstructured grids. The discretizations are based on high order H(grad), H(curl) and H(div) conforming finite element spaces combined with an implicit and unconditionally stable generalized Crank-Nicholson time differencing method. We develop three separate electromagnetic diffusion formulations, namely the E (electric field), H (magnetic field) and the A-{phi} (potential) formulations. For each formulation, we also provide a consistent procedure for computing the secondary variables F (current flux density) and B (magnetic flux density), as these fields are required for the computation of electromagnetic force and heating terms. We verify the error convergence properties of each formulation via a series of numerical experiments on canonical problems with known analytic solutions. The key result is that the different formulations are equally accurate, even for the secondary variables J and B, and hence the choice of which formulation to use depends mostly upon relevance of the Natural and Essential boundary conditions to the problem of interest. In addition, we highlight issues with numerical verification of finite element methods which can lead to false conclusions on the accuracy of the methods.

  5. A novel method for transient detection in high-cadence optical surveys. Its application for a systematic search for novae in M 31

    Science.gov (United States)

    Soraisam, Monika D.; Gilfanov, Marat; Kupfer, Thomas; Masci, Frank; Shafter, Allen W.; Prince, Thomas A.; Kulkarni, Shrinivas R.; Ofek, Eran O.; Bellm, Eric

    2017-02-01

    Context. In the present era of large-scale surveys in the time domain, the processing of data, from procurement up to the detection of sources, is generally automated. One of the main challenges in the astrophysical analysis of their output is contamination by artifacts, especially in the regions of high surface brightness of unresolved emission. Aims: We present a novel method for identifying candidates for variable and transient sources from the outputs of optical time-domain survey data pipelines. We use the method to conduct a systematic search for novae in the intermediate Palomar Transient Factory (iPTF) observations of the bulge part of M 31 during the second half of 2013. Methods: We demonstrate that a significant fraction of artifacts produced by the iPTF pipeline form a locally uniform background of false detections approximately obeying Poissonian statistics, whereas genuine variable and transient sources, as well as artifacts associated with bright stars, result in clusters of detections whose spread is determined by the source localization accuracy. This makes the problem analogous to source detection on images produced by grazing incidence X-ray telescopes, enabling one to utilize the arsenal of powerful tools developed in X-ray astronomy. In particular, we use a wavelet-based source detection algorithm from the Chandra data analysis package CIAO. Results: Starting from 2.5 × 105 raw detections made by the iPTF data pipeline, we obtain approximately 4000 unique source candidates. Cross-matching these candidates with the source-catalog of a deep reference image of the same field, we find counterparts for 90% of the candidates. These sources are either artifacts due to imperfect PSF matching or genuine variable sources. The remaining approximately 400 detections are transient sources. We identify novae among these candidates by applying selection cuts to their lightcurves based on the expected properties of novae. Thus, we recovered all 12 known novae

  6. Rapid transient production in plants by replicating and non-replicating vectors yields high quality functional anti-HIV antibody.

    Directory of Open Access Journals (Sweden)

    Frank Sainsbury

    Full Text Available The capacity of plants and plant cells to produce large amounts of recombinant protein has been well established. Due to advantages in terms of speed and yield, attention has recently turned towards the use of transient expression systems, including viral vectors, to produce proteins of pharmaceutical interest in plants. However, the effects of such high level expression from viral vectors and concomitant effects on host cells may affect the quality of the recombinant product.To assess the quality of antibodies transiently expressed to high levels in plants, we have expressed and characterised the human anti-HIV monoclonal antibody, 2G12, using both replicating and non-replicating systems based on deleted versions of Cowpea mosaic virus (CPMV RNA-2. The highest yield (approximately 100 mg/kg wet weight leaf tissue of affinity purified 2G12 was obtained when the non-replicating CPMV-HT system was used and the antibody was retained in the endoplasmic reticulum (ER. Glycan analysis by mass-spectrometry showed that the glycosylation pattern was determined exclusively by whether the antibody was retained in the ER and did not depend on whether a replicating or non-replicating system was used. Characterisation of the binding and neutralisation properties of all the purified 2G12 variants from plants showed that these were generally similar to those of the Chinese hamster ovary (CHO cell-produced 2G12.Overall, the results demonstrate that replicating and non-replicating CPMV-based vectors are able to direct the production of a recombinant IgG similar in activity to the CHO-produced control. Thus, a complex recombinant protein was produced with no apparent effect on its biochemical properties using either high-level expression or viral replication. The speed with which a recombinant pharmaceutical with excellent biochemical characteristics can be produced transiently in plants makes CPMV-based expression vectors an attractive option for

  7. Time-domain parameter identification of aeroelastic loads by forced-vibration method for response of flexible structures subject to transient wind

    Science.gov (United States)

    Cao, Bochao

    Slender structures representing civil, mechanical and aerospace systems such as long-span bridges, high-rise buildings, stay cables, power-line cables, high light mast poles, crane-booms and aircraft wings could experience vortex-induced and buffeting excitations below their design wind speeds and divergent self-excited oscillations (flutter) beyond a critical wind speed because these are flexible. Traditional linear aerodynamic theories that are routinely applied for their response prediction are not valid in the galloping, or near-flutter regime, where large-amplitude vibrations could occur and during non-stationary and transient wind excitations that occur, for example, during hurricanes, thunderstorms and gust fronts. The linear aerodynamic load formulation for lift, drag and moment are expressed in terms of aerodynamic functions in frequency domain that are valid for straight-line winds which are stationary or weakly-stationary. Application of the frequency domain formulation is restricted from use in the nonlinear and transient domain because these are valid for linear models and stationary wind. The time-domain aerodynamic force formulations are suitable for finite element modeling, feedback-dependent structural control mechanism, fatigue-life prediction, and above all modeling of transient structural behavior during non-stationary wind phenomena. This has motivated the developing of time-domain models of aerodynamic loads that are in parallel to the existing frequency-dependent models. Parameters defining these time-domain models can be now extracted from wind tunnel tests, for example, the Rational Function Coefficients defining the self-excited wind loads can be extracted using section model tests using the free vibration technique. However, the free vibration method has some limitations because it is difficult to apply at high wind speeds, in turbulent wind environment, or on unstable cross sections with negative aerodynamic damping. In the current

  8. Swift discoveries of new populations of extremely long duration high energy transient

    CERN Document Server

    Levan, A J

    2015-01-01

    Recent observations with Swift have begun to uncover $\\gamma$-ray transients whose total energies are comparable to those of gamma-ray bursts (GRB), but have a duration an order of magnitude or more longer than the bulk of the GRB population. Some are suggested to form a new population of ultra-long GRBs, with a mean duration around $10^4$s, while a further population with $\\gamma-$ray durations $>10^5$ s may represent manifestations of relativistic outflows from stars shredded around massive black holes in tidal disruption flares (TDFs). Here I review the observations of these new classes of events, discuss progress towards identifying their progenitors and suggest how new observations may both hone our understanding of the outbursts, and allow them to be used as probes, that offer both complementary and additional tools to GRBs.

  9. On the Use of Hot-Sphere Anemometers in a Highly Transient Flow in a Double-Skin Facade

    DEFF Research Database (Denmark)

    Jensen, Rasmus Lund; Kalyanova, Olena; Hyldgård, Carl-Erik

    2007-01-01

    is highly transient and therefore, the dynamic properties of the hot-sphere anemometer must be investigated. An experimental setup to measure the dynamic property using a jet-wind tunnel and a device for moving the anemometer is described. The experimental setup allows examination of the standard deviation...... measured by the anemometer. Temperature compensation is the working principle of anemometers. The ability to compensate for different temperatures when exposed to solar radiation is investigated in a controlled environment using a powerful lamp as a radiant heat source. In the double-skin façade, both...

  10. Optimization of Drive Pulse Configuration for a High-Gain Transient X-Ray Laser at 19.6 nm

    Institute of Scientific and Technical Information of China (English)

    LU Xin; LI Ying-Jun; ZHANG Jie

    2001-01-01

    An Ne-like transient collisional excitation x-ray laser at 19.6nm (J = 0 → 1, 3p - 3s) was investigated numerically using a sophisticated hydrodynamic code for a l00μm thick Ge planar target irradiated by a nanosecond pre pulse followed by a picosecond main optical laser pulse. The simulations indicate that for a given peak intensity, the main pulse has an optimal duration to generate the maximum effective gain. An effective gain as high as 200 cma-1 was obtained for the optimized drive pulse configuration.

  11. High-level diterpene production by transient expression in Nicotiana benthamiana

    Science.gov (United States)

    2013-01-01

    Background Characterization of plant terpene synthases is typically done by production of recombinant enzymes in Escherichia coli. This is often difficult due to solubility and codon usage issues. Furthermore, plant terpene synthases which are targeted to the plastids, such as diterpene synthases, have to be shortened in a more or less empirical approach to improve expression. We report here an optimized Agrobacterium-mediated transient expression assay in Nicotiana benthamiana for plant diterpene synthase expression and product analysis. Results Agrobacterium-mediated transient expression of plant diterpene synthases in N. benthamiana led to the accumulation of diterpenes within 3 days of infiltration and with a maximum at 5 days. Over 50% of the products were exported onto the leaf surface, thus considerably facilitating the analysis by reducing the complexity of the extracts. The robustness of the method was tested by expressing three different plant enzymes, cembratrien-ol synthase from Nicotiana sylvestris, casbene synthase from Ricinus communis and levopimaradiene synthase from Gingko biloba. Furthermore, co-expression of a 1-deoxy-D-xylulose-5-phosphate synthase from tomato and a geranylgeranyl diphosphate synthase from tobacco led to a 3.5-fold increase in the amount of cembratrien-ol produced, with maximum yields reaching 2500 ng/cm2. Conclusion With this optimized method for diterpene synthase expression and product analysis, a single infiltrated leaf of N. benthamiana would be sufficient to produce quantities required for the structure elucidation of unknown diterpenes. The method will also be of general use for gene function discovery, pathway reconstitution and metabolic engineering of diterpenoid biosynthesis in plants. PMID:24330621

  12. High-density transfection with HEK-293 cells allows doubling of transient titers and removes need for a priori DNA complex formation with PEI.

    Science.gov (United States)

    Backliwal, Gaurav; Hildinger, Markus; Hasija, Vivek; Wurm, Florian M

    2008-02-15

    Recombinant proteins are of great commercial and scientific interest. Yet, most production methods in mammalian cells involve the time- and labor-consuming step of creating stable cell lines. Production methods based on transient gene expression are advantageous in terms of speed and versatility; yet, depending on the transfection protocol, transient transfection faces some bottlenecks such as a priori complex formation, limitations in terms of transfection and production media used and the need for medium exchange prior to and/or after transfection. Published protocols for transfection of suspension-adapted HEK-293 cells with polyethyleneimine have shown great promise in overcoming some of these bottlenecks, but still require a priori complex formation for optimal yields and limit the choice of transfection and production media. Here, we report successful in situ transfection of suspension-adapted HEK-293 cells with 25-kDa linear polyethyleneimine at densities up to 20 x 10(6) cells/mL in complex media followed by production at lower cell densities (1 x 10(6) cells/mL). After concentrating cells to such high densities, transfection of HEK-293 cells becomes possible in most commonly used media and is not restricted to a specific medium. Furthermore, there is no need to make transfection complexes a priori, a step that prevents inline sterile filtration of the DNA bulk for transfection, an important consideration when scaling processes up to 100 or 1,000 L. Finally, transfecting HEK-293 cells at high density in complex media is superior to existing transfection protocols and doubles yields of recombinant protein obtainable by transient gene expression.

  13. Estimating High-Dimensional Time Series Models

    DEFF Research Database (Denmark)

    Medeiros, Marcelo C.; Mendes, Eduardo F.

    We study the asymptotic properties of the Adaptive LASSO (adaLASSO) in sparse, high-dimensional, linear time-series models. We assume both the number of covariates in the model and candidate variables can increase with the number of observations and the number of candidate variables is, possibly...

  14. Transient liquid-crystal technique used to produce high-resolution convective heat-transfer-coefficient maps

    Science.gov (United States)

    Hippensteele, Steven A.; Poinsatte, Philip E.

    1993-01-01

    In this transient technique the preheated isothermal model wall simulates the classic one-dimensional, semi-infinite wall heat transfer conduction problem. By knowing the temperature of the air flowing through the model, the initial temperature of the model wall, and the surface cooling rate measured at any location with time (using the fast-response liquid-crystal patterns recorded on video tape), the heat transfer coefficient can be calculated for the color isothermal pattern produced. Although the test was run transiently, the heat transfer coefficients are for the steady-state case. The upstream thermal boundary condition was considered to be isothermal. This transient liquid-crystal heat-transfer technique was used in a transient air tunnel in which a square-inlet, 3-to-1 exit transition duct was placed. The duct was preheated prior to allowing room temperature air to be suddenly drawn through it. The resulting isothermal contours on the duct surfaces were revealed using a surface coating of thermochromic liquid crystals that display distinctive colors at particular temperatures. A video record was made of the temperature and time data for all points on the duct surfaces during each test. The duct surfaces were uniformly heated using two heating systems: the first was an automatic temperature-controlled heater blanket completely surrounding the test duct like an oven, and the second was an internal hot-air loop through the inside of the test duct. The hot-air loop path was confined inside the test duct by insulated heat dams located at the inlet and exit ends of the test duct. A recirculating fan moved hot air into the duct inlet, through the duct, out of the duct exit, through the oven, and back to the duct inlet. The temperature nonuniformity of the test duct model wall was held very small. Test results are reported for two inlet Reynolds numbers of 200,000 and 1,150,000 (based on the square-inlet hydraulic diameter) and two free-stream turbulence

  15. Measurement of steady and transient liquid coiling with high-speed video and digital image processing

    Science.gov (United States)

    Mier, Frank Austin; Bhakta, Raj; Castano, Nicolas; Thackrah, Joshua; Marquis, Tyler; Garcia, John; Hargather, Michael

    2016-11-01

    Liquid coiling occurs as a gravitationally-accelerated viscous fluid flows into a stagnant reservoir causing a localized accumulation of settling material, commonly designated as stack. This flow is broadly characterized by a vertical rope of liquid, the tail, flowing into the stack in a coiled motion with frequency defined parametrically within four different flow regimes. These regimes are defined as viscous, gravitational, inertial-gravitational, and inertial. Relations include parameters such as flow rate, drop height, rope radius, gravitational acceleration, and kinematic viscosity. While previous work on the subject includes high speed imaging, only basic and often averaged measurements have been taken by visual inspection of images. Through the implementation of additional image processing routines in MATLAB, time resolved measurements are taken on coiling frequency, tail diameter, stack diameter and height. Synchronization between a high speed camera and stepper motor driven syringe pump provides accurate correlation with flow rate. Additionally, continuous measurement of unsteady transition between flow regimes is visualized and quantified. This capability allows a deeper experimental understanding of processes involved in the liquid coiling phenomenon.

  16. High-time Resolution Astrophysics and Pulsars

    CERN Document Server

    Shearer, Andy

    2008-01-01

    The discovery of pulsars in 1968 heralded an era where the temporal characteristics of detectors had to be reassessed. Up to this point detector integration times would normally be measured in minutes rather seconds and definitely not on sub-second time scales. At the start of the 21st century pulsar observations are still pushing the limits of detector telescope capabilities. Flux variations on times scales less than 1 nsec have been observed during giant radio pulses. Pulsar studies over the next 10 to 20 years will require instruments with time resolutions down to microseconds and below, high-quantum quantum efficiency, reasonable energy resolution and sensitive to circular and linear polarisation of stochastic signals. This chapter is review of temporally resolved optical observations of pulsars. It concludes with estimates of the observability of pulsars with both existing telescopes and into the ELT era.

  17. Local and transient structural changes in stratum corneum at high electric fields: contribution of Joule heating.

    Science.gov (United States)

    Pliquett, U; Gallo, S; Hui, S W; Gusbeth, Ch; Neumann, E

    2005-09-01

    Electroporation of skin is accompanied by local heating, such that thermally induced structural changes of the stratum corneum (SC) accompany the field effect. Comparing on the time scale, the local changes in structure, temperature and conductance of the SC, during and after the pulse, it is seen that Joule heating also facilitates the subsequent molecular transport. It is found that the transport of medium-sized, ionic molecules occurs through localized transport regions (LTR). The size of a LTR increases with the pulse length, whereas the density of the LTRs increases with increasing voltage, for instance at U(SC=)80 V, the LTR cover approximately 0.02--1% of the surface area. The state of low resistance within the LTR is long-lived. During high voltage application, the center of the LTR is heated above the phase transition temperature of the SC lipids (70 degrees C) and the heat front propagates outwards. Inside the SC, the pulse causes aggregates of small-sized vesicles. At a higher temperature, the aggregate formation and their disappearance are delayed. Multiple pulses with the applied voltage of U(appl)=80 V induce the formation of long-lasting vesicle aggregates with a diameter of slashed circle=1--30 microm, covering 0.05--0.5% of the total sample area. The electric energy dissipated within the LTR during high voltage application is apparently sufficient to raise the temperature well above the phase transition temperature of the lipids of the SC, accounting for the conformational changes from the multi-lamella to the vesicular structures.

  18. Dynamic Analysis of Cable Roofs Under Transient Wind:A Comparison Between Time Domain and Frequency Domain Approaches

    Institute of Scientific and Technical Information of China (English)

    S.Ali Ghafari Oskoei; Ghyslaine McClure

    2008-01-01

    At present,high.speed computing capabilities and advanced nonlinear dynamic finite element procedures enable detailed dynamic analysis of cable structures.Although deterministic approaches require considerable analysis time and effort in relation to modeling,running,and data processing,they seem to be the only alternative to obtain high accuracy.Detailed dynamic analysis of cable roof networks is sophisticated and requires advanced modeling expertise.This paper presents a comparison between detailed nonlinear dynamic analysis and a simplified frequency domain approach to estimate the maximum probable response of weakly nonlinear cable roofs.The approach can be considered as alternative to detailed time-domain analysis in the preliminary design phase,or can be used to validate results obtained from more elaborated numerical models.The proposed method is illustrated with two examples of cable net roofs that were also analysed in the time domain.

  19. Transient Ischemic Attack

    Medline Plus

    Full Text Available ... TIA , or transient ischemic attack, is a "mini stroke" that occurs when a blood clot blocks an ... a short time. The only difference between a stroke and TIA is that with TIA the blockage ...

  20. Transient Ischemic Attack

    Medline Plus

    Full Text Available ... TIA , or transient ischemic attack, is a "mini stroke" that occurs when a blood clot blocks an ... a short time. The only difference between a stroke and TIA is that with TIA the blockage ...

  1. Transient Ischemic Attack

    Medline Plus

    Full Text Available ... Ischemic Attack TIA , or transient ischemic attack, is a "mini stroke" that occurs when a blood clot blocks an artery for a short time. The only difference between a stroke ...

  2. A high cell density transient transfection system for therapeutic protein expression based on a CHO GS-knockout cell line: process development and product quality assessment.

    Science.gov (United States)

    Rajendra, Yashas; Hougland, Maria D; Alam, Riazul; Morehead, Teresa A; Barnard, Gavin C

    2015-05-01

    Transient gene expression (TGE) is a rapid method for the production of recombinant proteins in mammalian cells. While the volumetric productivity of TGE has improved significantly over the past decade, most methods involve extensive cell line engineering and plasmid vector optimization in addition to long fed batch cultures lasting up to 21 days. Our colleagues have recently reported the development of a CHO K1SV GS-KO host cell line. By creating a bi-allelic glutamine synthetase knock out of the original CHOK1SV host cell line, they were able to improve the efficiency of generating high producing stable CHO lines for drug product manufacturing. We developed a TGE method using the same CHO K1SV GS-KO host cell line without any further cell line engineering. We also refrained from performing plasmid vector engineering. Our objective was to setup a TGE process to mimic protein quality attributes obtained from stable CHO cell line. Polyethyleneimine (PEI)-mediated transfections were performed at high cell density (4 × 10(6) cells/mL) followed by immediate growth arrest at 32 °C for 7 days. Optimizing DNA and PEI concentrations proved to be important. Interestingly, found the direct transfection method (where DNA and PEI were added sequentially) to be superior to the more common indirect method (where DNA and PEI are first pre-complexed). Moreover, the addition of a single feed solution and a polar solvent (N,N dimethylacetamide) significantly increased product titers. The scalability of process from 2 mL to 2 L was demonstrated using multiple proteins and multiple expression volumes. Using this simple, short, 7-day TGE process, we were able to successfully produce 54 unique proteins in a fraction of the time that would have been required to produce the respective stable CHO cell lines. The list of 54 unique proteins includes mAbs, bispecific antibodies, and Fc-fusion proteins. Antibody titers of up to 350 mg/L were achieved with the simple 7-day process. Titers

  3. Transient fluvial incision as an indicator of active faulting and surface uplift in the Moroccan High Atlas.

    Science.gov (United States)

    Boulton, Sarah; Stokes, Martin; Mather, Anne

    2013-04-01

    Quantifying the extent to which geomorphic features can be used to extract tectonic signals is a key challenge for the Earth Sciences. Here, we analyse the long profiles of rivers that drain southwards across the Southern Atlas Fault (SAF), a segmented thrust fault that forms the southern margin of the High Atlas Mountains in Morocco, with the aim of deriving new data on the recent activity of this little known fault system. River long profiles were extracted for the 32 major rivers that drain southwards into the Ouarzazate foreland basin. Of these, twelve exhibit concave-up river profiles with a mean concavity (Θ) of 0.61 and normalized steepness indices (Ksn) in the range 42-219; these are interpreted as rivers at or near steady-state. By contrast, 20 rivers are characterised by the presence of at least one knickpoint upstream of the thrust front. Knickzone height (the vertical distance between the knickpoint and the fault) varies from 100 - 1300 m, with calculated amounts of uplift at the range bounding fault ranging from 1040 - 80 m. In map view, knickpoint locations generally plot along sub-parallel lines to the thrust front and there are no obvious relationships with specific lithological units or boundaries. Furthermore, drainage areas upstream of the knickpoints range over several orders of magnitude indicating that they are not pinned at threshold drainage areas. Therefore, these features are interpreted as a transient response to base-level change. However, three distinct populations of knickpoints can be recognised based upon knickpoint elevation, these are termed K1, K2 and K3 and channel reaches are universally steeper below knickpoints than above. K1 and K2 knickpoints share common characteristics in that the elevation of the knickpoints, calculated incision and ksn all increase from west to east. Whereas, K3 knickpoints show little systematic variation along the range front, are observed at the lowest altitudes with calculated incision of < 200 m

  4. Systematic analysis of protein subcellular localization and interaction using high-throughput transient transformation of Arabidopsis seedlings.

    Science.gov (United States)

    Marion, Jessica; Bach, Lien; Bellec, Yannick; Meyer, Christian; Gissot, Lionel; Faure, Jean-Denis

    2008-10-01

    The functional genomics approach requires systematic analysis of protein subcellular distribution and interaction networks, preferably by optimizing experimental simplicity and physiological significance. Here, we present an efficient in planta transient transformation system that allows single or multiple expression of constructs containing various fluorescent protein tags in Arabidopsis cotyledons. The optimized protocol is based on vacuum infiltration of agrobacteria directly into young Arabidopsis seedlings. We demonstrate that Arabidopsis epidermal cells show a subcellular distribution of reference markers similar to that in tobacco epidermal cells, and can be used for co-localization or bi-molecular fluorescent complementation studies. We then used this new system to investigate the subcellular distribution of enzymes involved in sphingolipid metabolism. In contrast to transformation systems using tobacco epidermal cells or cultured Arabidopsis cells, our system provides the opportunity to take advantage of the extensive collections of mutant and transgenic lines available in Arabidopsis. The fact that this assay uses conventional binary vectors and a conventional Agrobacterium strain, and is compatible with a large variety of fluorescent tags, makes it a versatile tool for construct screening and characterization before stable transformation. Transient expression in Arabidopsis seedlings is thus a fast and simple method that requires minimum handling and potentially allows medium- to high-throughput analyses of fusion proteins harboring fluorescent tags in a whole-plant cellular context.

  5. Photoinduced electron transfer between 2-methylanthraquinone and triethylamine in an ionic liquid: Time-resolved EPR and transient absorption spectroscopy study

    Science.gov (United States)

    Zhu, Guanglai; Wang, Yu; Fu, Haiying; Xu, Xinsheng; Cui, Zhifeng; Ji, Xuehan; Wu, Guozhong

    2015-02-01

    Photoinduced electron transfer between 2-methylanthraquinone (MeAQ) and triethylamine (TEA) in a room-temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]), was investigated by comparing the time-resolved electron paramagnetic resonance (TR-EPR) spectroscopy and the transient absorption spectroscopy. The results of TR-EPR spectroscopy, in which MeAQ was 8 mmol L-1 and TEA was 150 mmol L-1, indicated that the transient radical would exist longer time in [bmim][PF6] than in acetonitrile. At the delay time of 8 μs after laser excitation, the TR-EPR signal transformed from an emissive peak into an absorptive peak when the experiment was performed in [bmim][PF6]. The results of the transient absorption spectroscopy, in which MeAQ was 0.1 mmol L-1 and TEA was 2.2 mmol L-1, showed that the efficiency and the rate of the photoinduced electron transfer reaction in [bmim][PF6] were obviously lower than that in acetonitrile. It was concluded that various factors, such as concentration, viscosity and local structural transformation of the solution, have an influence on the process of photoinduced electron transfer in [bmim][PF6].

  6. Photoinduced electron transfer between 2-methylanthraquinone and triethylamine in an ionic liquid: time-resolved EPR and transient absorption spectroscopy study.

    Science.gov (United States)

    Zhu, Guanglai; Wang, Yu; Fu, Haiying; Xu, Xinsheng; Cui, Zhifeng; Ji, Xuehan; Wu, Guozhong

    2015-02-25

    Photoinduced electron transfer between 2-methylanthraquinone (MeAQ) and triethylamine (TEA) in a room-temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]), was investigated by comparing the time-resolved electron paramagnetic resonance (TR-EPR) spectroscopy and the transient absorption spectroscopy. The results of TR-EPR spectroscopy, in which MeAQ was 8 mmol L(-1) and TEA was 150 mmol L(-1), indicated that the transient radical would exist longer time in [bmim][PF6] than in acetonitrile. At the delay time of 8 μs after laser excitation, the TR-EPR signal transformed from an emissive peak into an absorptive peak when the experiment was performed in [bmim][PF6]. The results of the transient absorption spectroscopy, in which MeAQ was 0.1 mmol L(-1) and TEA was 2.2 mmol L(-1), showed that the efficiency and the rate of the photoinduced electron transfer reaction in [bmim][PF6] were obviously lower than that in acetonitrile. It was concluded that various factors, such as concentration, viscosity and local structural transformation of the solution, have an influence on the process of photoinduced electron transfer in [bmim][PF6].

  7. 一体化瞬态高温智能存储测试系统设计%Design of incorporate intelligent test system for transient high temperature

    Institute of Scientific and Technical Information of China (English)

    石正全; 李新娥; 郝晓剑

    2014-01-01

    为解决当前瞬态高温测试中存在的测试系统对瞬态高温参数信号响应速度慢、动态特性不足、设备布设及装置回收不便等问题,综合运用无线通信技术、数据采集与缓冲技术和存储测试技术,设计了一种通用一体化瞬态高温智能存储测试系统。该系统可用于特殊测试环境下瞬态高温参数的测试,并实时记录存储测试数据和处理结果。设计了基于蓝宝石黑体平面的瞬态高温敏感体、数据处理存储模块和无线模块,并将瞬态高温敏感体、数据处理存储模块和无线模块进行一体化设计。通过ZigBee模块对系统进行参数设置(上、下电、触发电平、测量范围等),使用AVR单片机和FP GA为主控芯片,解决了特殊测试环境下瞬态高温参数的测试采集问题。实际测试结果表明,该瞬态高温智能存储测试系统可准确获得被测温度场瞬态高温参数,具有无线遥控、微功耗、高精度、抗高冲击、抗干扰、微型化、工作稳定和可靠性高等特点,适于恶劣测试环境下瞬态高温参数的测试和记录。%Aimed at the problems of the slow response speed of the transient high temperature parameter signal, the inadequacy of the dynamic characteristics of the test system, the inconwenience of the equipment layout of the test system and the recycle of the test device in the current transient high temperature testing,the incorporate intelligent test system for transient high temperature,which is universal and multi-channel,was designed based on the wireless communication technology,the data acquisition and buffer technology and the storage test technology. The system can be used for transient temperature parameter test in special testing environment,and the real-time record storage of the test data and the processing results. The transient high temperature sensitive body was designed based on the sapphire plane blackbody,the data

  8. Transient analysis of a grid connected wind driven induction generator using a real-time simulation platform

    Energy Technology Data Exchange (ETDEWEB)

    Ouhrouche, Mohand [Department of Applied Sciences, University of Quebec at Chicoutimi, Quebec, G7H2B1 (Canada)

    2009-03-15

    Due to its simple construction, ruggedness and low cost, the induction generator driven by a wind turbine and feeding power to the grid appears to be an attractive solution to the problem of growing energy demand in the context of environmental issues. This paper investigates the integration of such a system into the main utility using RT-Lab trademark (Trademark of Opal-RT Technologies) software package running on a simple off-the-shelf PC. This real-time simulation platform is now adopted by many high-tech industries as a real-time laboratory package for rapid control prototyping and for Hardware-in-the-Loop applications. Real-time digital simulation results obtained during contingencies, such as islanding and unbalanced faults are presented and analysed. (author)

  9. High-level HIV-1 Nef transient expression in Nicotiana benthamiana using the P19 gene silencing suppressor protein of Artichoke Mottled Crinckle Virus

    Directory of Open Access Journals (Sweden)

    Bianco Linda

    2009-11-01

    Full Text Available Abstract Background In recent years, different HIV antigens have been successfully expressed in plants by either stable transformation or transient expression systems. Among HIV proteins, Nef is considered a promising target for the formulation of a multi-component vaccine due to its implication in the first steps of viral infection. Attempts to express Nef as a single protein product (not fused to a stabilizing protein in transgenic plants resulted in disappointingly low yields (about 0.5% of total soluble protein. In this work we describe a transient expression system based on co-agroinfiltration of plant virus gene silencing suppressor proteins in Nicotiana benthamiana, followed by a two-step affinity purification protocol of plant-derived Nef. Results The effect of three gene silencing viral suppressor proteins (P25 of Potato Virus X, P19 of either Artichoke Mottled Crinckle virus and Tomato Bushy Stunt virus on Nef transient expression yield was evaluated. The P19 protein of Artichoke Mottled Crinckle virus (AMCV-P19 gave the highest expression yield in vacuum co-agroinfiltration experiments reaching 1.3% of total soluble protein, a level almost three times higher than that previously reported in stable transgenic plants. The high yield observed in the co-agroinfiltrated plants was correlated to a remarkable decrease of Nef-specific small interfering RNAs (siRNAs indicating an effective modulation of RNA silencing mechanisms by AMCV-P19. Interestingly, we also showed that expression levels in top leaves of vacuum co-agroinfiltrated plants were noticeably reduced compared to bottom leaves. Moreover, purification of Nef from agroinfiltrated tissue was achieved by a two-step immobilized metal ion affinity chromatography protocol with yields of 250 ng/g of fresh tissue. Conclusion We demonstrated that expression level of HIV-1 Nef in plant can be improved using a transient expression system enhanced by the AMCV-P19 gene silencing suppressor

  10. Transient liquid phase bonding of magnesium alloys AZ31 using nickel coatings and high frequency induction heat sintering

    Directory of Open Access Journals (Sweden)

    A.N. AlHazaa

    2016-04-01

    Full Text Available Transient liquid phase (TLP bonding process was applied to join magnesium alloy AZ31 samples with minimum microstructural changes. The magnesium samples were coated by 5 μm nickel prior to the TLP bonding. Bonding conditions of 8 MPa uniaxial pressure and 520 °C bonding temperature were applied for all bonds at various bonding times. The microstructure across the joint regions was examined as a function of bonding time (5–60 min. Investigating the change in Ni contents was examined by EDS line scan. It was noticed that Ni coating could not be observed by SEM for bonds made at 30 and 60 min due to complete dissolution of the Ni coating. Second phase particles containing Mg2Ni intermetallics were observed by X-ray Photoelectron Spectroscopy (XPS near the joint region. The shear strength of the bonds initially increases with the increase in bonding time till 20 min. On the other hand, with bonding times over 20 min the shear strength decreases. Therefore the optimum bonding time at the conditions applied was concluded to be 20 min.

  11. High risk of misinterpreting liver and spleen stiffness using 2D shear-wave and transient elastography after a moderate or high calorie meal.

    Science.gov (United States)

    Kjærgaard, Maria; Thiele, Maja; Jansen, Christian; Stæhr Madsen, Bjørn; Görtzen, Jan; Strassburg, Christian; Trebicka, Jonel; Krag, Aleksander

    2017-01-01

    Food intake increases liver stiffness, but it is believed that liver stiffness returns to baseline two hours after a meal. The aim of this study was to investigate the impact of different sized meals on liver stiffness. Liver and spleen stiffness was measured with transient elastography (TE) and real-time 2-dimensional shear wave elastography (2D-SWE). Patients ingested a 625 kcal and a 1250 kcal liquid meal on two consecutive days. We measured liver and spleen elasticity, Controlled attenuation parameter (CAP) and portal flow at baseline and after 20, 40, 60, 120 and 180 minutes. Sixty patients participated, 83% with alcoholic liver disease. Twenty-eight patients had METAVIR fibrosis score F0-3 and 32 patients had cirrhosis. Liver stiffness, spleen stiffness and CAP increased after both meals for all stages of fibrosis. False positive 2D-SWE liver stiffness measurements caused 36% and 52% of patients with F0-3 fibrosis to be misclassified with higher stages of fibrosis after the moderate and high caloric meal. Likewise, 10% and 13% of compensated cirrhosis patients were misclassified with clinically significant portal hypertension after the two meals. We observed similar misclassification rates with TE. After three hours, liver stiffness remained elevated more than 20% from baseline in up to 50% of patients. Liver stiffness, spleen stiffness and CAP increase after a meal across all stages of fibrosis and across elastography techniques. Up to half of patients may be misclassified with higher stages of fibrosis, if they are assessed after less than three hours fasting period.

  12. Femtosecond time-resolved transient absorption spectroscopy of CH3NH3PbI3 perovskite films: evidence for passivation effect of PbI2.

    Science.gov (United States)

    Wang, Lili; McCleese, Christopher; Kovalsky, Anton; Zhao, Yixin; Burda, Clemens

    2014-09-01

    CH3NH3PbI3 perovskite layered films deposited on substrates with and without a titania support structure have been prepared and studied using time-resolved femtosecond transient absorption (fs-TA) spectroscopy in the visible light range (450-800 nm). The electron injection dynamics from the photoexcited perovskite layers to the neighboring film structures could be directly monitored via the transient bleaching dynamics of the perovskite at ∼750 nm and thus systematically studied as a function of the layer-by-layer architecture. In addition, for the first time we could spectrally distinguish transient bleaching at ∼750 nm from laser-induced fluorescence that occurs red-shifted at ∼780 nm. We show that an additional bleach feature at ∼510 nm appears when PbI2 is present in the perovskite film. The amplitudes of the PbI2 and perovskite TA peaks were compared to estimate relative amounts of PbI2 in the samples. Kinetic analysis reveals that perovskite films with less PbI2 show faster relaxation rates than those containing more PbI2. These fast dynamics are attributed to charge carrier trapping at perovskite grain boundaries, and the slower dynamics in samples containing PbI2 are due to a passivation effect, in line with other recently reported work.

  13. Monitoring groundwater-surface water interaction using time-series and time-frequency analysis of transient three-dimensional electrical resistivity changes

    Science.gov (United States)

    Johnson, Timothy C.; Slater, Lee D.; Ntarlagiannis, Dimitris; Day-Lewis, Frederick D.; Elwaseif, Mehrez

    2012-01-01

    Time-lapse resistivity imaging is increasingly used to monitor hydrologic processes. Compared to conventional hydrologic measurements, surface time-lapse resistivity provides superior spatial coverage in two or three dimensions, potentially high-resolution information in time, and information in the absence of wells. However, interpretation of time-lapse electrical tomograms is complicated by the ever-increasing size and complexity of long-term, three-dimensional (3-D) time series conductivity data sets. Here we use 3-D surface time-lapse electrical imaging to monitor subsurface electrical conductivity variations associated with stage-driven groundwater-surface water interactions along a stretch of the Columbia River adjacent to the Hanford 300 near Richland, Washington, USA. We reduce the resulting 3-D conductivity time series using both time-series and time-frequency analyses to isolate a paleochannel causing enhanced groundwater-surface water interactions. Correlation analysis on the time-lapse imaging results concisely represents enhanced groundwater-surface water interactions within the paleochannel, and provides information concerning groundwater flow velocities. Time-frequency analysis using the Stockwell (S) transform provides additional information by identifying the stage periodicities driving groundwater-surface water interactions due to upstream dam operations, and identifying segments in time-frequency space when these interactions are most active. These results provide new insight into the distribution and timing of river water intrusion into the Hanford 300 Area, which has a governing influence on the behavior of a uranium plume left over from historical nuclear fuel processing operations.

  14. High frequency quasi-periodic oscillations in the black hole X-ray transient XTE J1650-500

    CERN Document Server

    Homan, J; Rossi, S; Miller, J M; Wijnands, R; Belloni, T; Van der Klis, M; Lewin, W H G; Homan, Jeroen; Klein-Wolt, Marc; Rossi, Sabrina; Miller, Jon M.; Wijnands, Rudy; Belloni, Tomaso; Klis, Michiel van der; Lewin, Walter H. G.

    2003-01-01

    We report the detection of high frequency variability in the black hole X-ray transient XTE J1650-500. A quasi-periodic oscillation (QPO) was found at 250 Hz during a transition from the hard to the soft state. We also detected less coherent variability around 50 Hz, that disappeared when the 250 Hz QPO showed up. There are indications that when the energy spectrum hardened the QPO frequency increased from ~110 Hz to ~270 Hz, although the observed frequencies are also consistent with being 1:2:3 harmonics of each other. Interpreting the 250 Hz as the orbital frequency at the innermost stable orbit around a Schwarzschild black hole leads to a mass estimate of 8.2 Msun. The spectral results by Miller et al.(2002, ApJ, 570, L69), which suggest considerable black hole spin, would imply a higher mass.

  15. Highly CO2-supersaturated melts in the Pannonian lithospheric mantle - A transient carbon reservoir?

    Science.gov (United States)

    Créon, Laura; Rouchon, Virgile; Youssef, Souhail; Rosenberg, Elisabeth; Delpech, Guillaume; Szabó, Csaba; Remusat, Laurent; Mostefaoui, Smail; Asimow, Paul D.; Antoshechkina, Paula M.; Ghiorso, Mark S.; Boller, Elodie; Guyot, François

    2017-08-01

    determined by Raman spectroscopy and microthermometry (0.1-1.1 GPa). The CO2/silicate melt mass ratios in the metasomatic agent that percolated through the lithospheric mantle below the Pannonian Basin are estimated to be between 9.0 and 25.4 wt.%, values consistent with metasomatism either by (1) silicate melts already supersaturated in CO2 before reaching lithospheric depths or (2) carbonatite melts that interacted with mantle peridotite to generate carbonated silicic melts. Taking the geodynamical context of the Pannonian Basin and our calculations of the CO2/silicate melt mass ratios in the metasomatic agent into account, we suggest that slab-derived melts initially containing up to 25 wt.% of CO2 migrated into the lithospheric mantle and exsolved CO2-rich fluid that became trapped in secondary fluid inclusions upon fracturing of the peridotite mineral matrix. We propose a first-order estimate of 2000 ppm as the minimal bulk CO2 concentration in the lithospheric mantle below the Pannonian Basin. This transient carbon reservoir is believed to be degassed through the Pannonian Basin due to volcanism and tectonic events, mostly focused along the lithospheric-scale regional Mid-Hungarian shear Zone.

  16. Research on application of transient electromagnetic technology in coal mine

    Institute of Scientific and Technical Information of China (English)

    WANG Yu-he; LI Wei; CHENG Jiu-long

    2007-01-01

    Studied the principle of transient electromagnetic method in coalmine and solved the computation of the whole time apparent resistivity and the relation between apparent resistivity and exploration depth and so on. Studied the work method of transient electromagnetic method in coalmine and obtained reasonable arrangement way. Studied data processing and explanation method of transient electromagnetic method and obtained high quality electric section. Finally the purpose to detect water-bearing body and water-bearing structure in front of roadway in advance, and detect the water-bearing property of the roof and floor rock layer of coal face were realized by use of transient electromagnetic method.

  17. Precision timing calorimeter for high energy physics

    Science.gov (United States)

    Anderson, Dustin; Apresyan, Artur; Bornheim, Adolf; Duarte, Javier; Peña, Cristián; Spiropulu, Maria; Trevor, Jason; Xie, Si; Ronzhin, Anatoly

    2016-07-01

    Scintillator based calorimeter technology is studied with the aim to achieve particle detection with a time resolution on the order of a few 10 ps for photons and electrons at energies of a few GeV and above. We present results from a prototype of a 1.4×1.4×11.4 cm3 sampling calorimeter cell consisting of tungsten absorber plates and Cerium-doped Lutetium Yttrium Orthosilicate (LYSO) crystal scintillator plates. The LYSO plates are read out with wave lengths shifting fibers which are optically coupled to fast photo detectors on both ends of the fibers. The measurements with electrons were performed at the Fermilab Test Beam Facility (FTBF) and the CERN SPS H2 test beam. In addition to the baseline setup plastic scintillation counter and a MCP-PMT were used as trigger and as a reference for a time of flight measurement (TOF). We also present measurements with a fast laser to further characterize the response of the prototype and the photo sensors. All data were recorded using a DRS4 fast sampling digitizer. These measurements are part of an R&D program whose aim is to demonstrate the feasibility of building a large scale electromagnetic calorimeter with a time resolution on the order of 10 ps, to be used in high energy physics experiments.

  18. Precision timing calorimeter for high energy physics

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Dustin; Apresyan, Artur [California Institute of Technology, Pasadena, CA 91125 (United States); Bornheim, Adolf, E-mail: bornheim@hep.caltech.edu [California Institute of Technology, Pasadena, CA 91125 (United States); Duarte, Javier; Peña, Cristián; Spiropulu, Maria; Trevor, Jason; Xie, Si [California Institute of Technology, Pasadena, CA 91125 (United States); Ronzhin, Anatoly [Fermi National Accelerator Laboratory, PO Box 500, Batavia, IL 60510-5011 (United States)

    2016-07-11

    Scintillator based calorimeter technology is studied with the aim to achieve particle detection with a time resolution on the order of a few 10 ps for photons and electrons at energies of a few GeV and above. We present results from a prototype of a 1.4×1.4×11.4 cm{sup 3} sampling calorimeter cell consisting of tungsten absorber plates and Cerium-doped Lutetium Yttrium Orthosilicate (LYSO) crystal scintillator plates. The LYSO plates are read out with wave lengths shifting fibers which are optically coupled to fast photo detectors on both ends of the fibers. The measurements with electrons were performed at the Fermilab Test Beam Facility (FTBF) and the CERN SPS H2 test beam. In addition to the baseline setup plastic scintillation counter and a MCP-PMT were used as trigger and as a reference for a time of flight measurement (TOF). We also present measurements with a fast laser to further characterize the response of the prototype and the photo sensors. All data were recorded using a DRS4 fast sampling digitizer. These measurements are part of an R&D program whose aim is to demonstrate the feasibility of building a large scale electromagnetic calorimeter with a time resolution on the order of 10 ps, to be used in high energy physics experiments.

  19. Application of High-Speed Infrared Imaging to Study Transient Joule Heating in Station Class Zinc Oxide Surge Arresters

    Energy Technology Data Exchange (ETDEWEB)

    Dinwiddie, R. B.; Wang, H.; Johnnerfelt, B.

    2004-03-15

    Zinc Oxide based surge arresters are widely used to safeguard and improve reliability of the electrical power delivering and transmission systems. The primary application of surge arresters is to protect valuable components such as transformers from lightning strikes and switching transients in the transmission lines. Metal-oxide-varistor blocks (MOV, e.g. ZnO) are used in surge arrester assemblies. ORNL has developed an advanced infrared imaging technique to monitor the joule heating during transient heating of small varistors. In a recent short-term R&D effort, researchers from ABB and ORNL have expanded the use of IR imaging to larger station-class arrester blocks. An on-site visit to the ABB facility demonstrated that the use of IR imaging is not only feasible but also has the potential to improve arrester quality and reliability. The ASEA Brown Bower (ABB) Power and Technology & Development Company located at Greensburg PA having benefited from collaborative R&D cooperation with ORNL. ABB has decided a follow-on CRADA project is very important. While the previous efforts to study surge arresters included broader studies of IR imaging and computer modeling, ABB has recognized the potential of IR imaging, decided to focus on this particular area. ABB plans to use this technique to systematically study the possible defects in the arrester fabrication process. ORNL will improve the real-time monitoring capability and provide analysis of the infrared images. More importantly, the IR images will help us understand transient heating in a ceramic material from the scientific standpoint. With the improved IR imaging ABB and ORNL will employ the IR system to visualize manufacturing defects that could not be detected otherwise. The proposed on-site tests at ABB Power Technology & Development processing facility will identify the defects and also allow quick adjustments to be made since the resulting products can be inspected immediately. ABB matched the DOE $50K funding

  20. Physics of Transient Seismic Emission from Flares

    Science.gov (United States)

    Lindsey, Charles A.; Donea, A.; Malanushenko, A.

    2012-05-01

    We consider the physics of seismic activity in solar flares, i.e., the release of powerful seismic transients into the solar interior during the impulsive phases of some flares. Recent work by Hudson, Fisher, Welsch and Bercik has attracted a great deal of positive attention to the possible role of Lorentz-force transients in driving seismic transient emission in flares. The implications of direct involvement by magnetic forces in seismic transient emission, if this could be confirmed, would be major, since magnetic fields are thought to hold the energy source of the flares themselves. The energy invested into acoustic transients is a small fraction of the total released by the flare, but requires a massive impulse many times that required to accelerate high-energy electrons into which the energy is initially thought to be invested. What does this say about a flare mechanism that sometimes does both? We discuss some of the outstanding diagnostic questions that confront the recognition of magnetic-field transients associated with Lorentz force transients based on resources HMI, Hinode, AIA and other facilities offer us.

  1. Simplex-TSDC spectroscopy: An efficient tool to measure the relaxation time of the isothermal transient depolarization current in organic dielectrics

    Energy Technology Data Exchange (ETDEWEB)

    Benchenane-Mehor, Halima, E-mail: halima_mehor_2000@yahoo.fr [Laboratoire CaSiCCE, Département de Génie Electrique, ENSET-Oran, B.P. 1523, El M’Naouer, 31000 Oran (Algeria); Laboratoire de Microphysique et de Nanophysique (LaMiN), Département de Physique-Chimie, ENSET-Oran, B.P. 1523 EL M’Naouer, 31000 Oran (Algeria); Soufi, Manil M.; Saiter, Jean-Marc; Benzohra, Mohamed [Laboratoire LECAP-AMME, EA 4528, Université de Rouen, Faculté des Sciences, Avenue de l' Université BP 12, 76801 Saint Etienne du Rouvray (France)

    2013-03-01

    The temporal technique analysis by a simplex optimization method of isothermal transient depolarization current measurements (Simplex-TSDC) is presented for the study of the glass transition domain of different polymers. The advantage of the present method compared to the classical TSDC is that it gives direct results comparable to the experiment and allows a good estimate of the relaxation time close to the glass transition temperature in dielectric thin films. The present method also allows a direct determination of two relaxation times corresponding to a fast and a slow dynamics; and then confirms the heterogeneous character of the molecular relaxation dynamics.

  2. Transient High-Temperature Processing of Silicates in Fulgurites as Analogues for Meteorite and Impact Melts

    Science.gov (United States)

    Parnell, J.; Thackrey, S.; Muirhead, D. K.; Wright, A. J.

    2008-03-01

    A fulgurite from the Sahara yielded petrographic data valuable as an analogue for highly reduced meteorite and impact melts, including iron silicide formation, devolatilization features, zircon melting and extreme melt heterogeneity.

  3. Low Power and Fast Transient High Swing CMOS Telescopic Operational Amplifier

    OpenAIRE

    Akshay Kumar Kansal; Asst Prof. Gayatri Sakya

    2015-01-01

    CMOS telescopic operational amplifier with high-swing and high-performance is described in this paper. The swing is attained by using the tail and current source-transistors in deep-linear region. The resultant deprivation in parameters like differential gain, CMRR and added characteristics are recompensed by using regulatedcascode differential gain enhancement and a replica-tail feedback technique. Operating at power supply of 3.3V, the power consumption, slew rate and settling t...

  4. Transient simulation and analysis of current collapse due to trapping effects in AlGaN/GaN high-electron-mobility transistor

    Institute of Scientific and Technical Information of China (English)

    周幸叶; 冯志红; 王元刚; 顾国栋; 宋旭波; 蔡树军

    2015-01-01

    In this paper, two-dimensional (2D) transient simulations of an AlGaN/GaN high-electron-mobility transistor (HEMT) are carried out and analyzed to investigate the current collapse due to trapping effects. The coupling effect of the trapping and thermal effects are taken into account in our simulation. The turn-on pulse gate-lag transient responses with different quiescent biases are obtained, and the pulsed current–voltage (I–V ) curves are extracted from the transients. The experi-mental results of both gate-lag transient current and pulsed I–V curves are reproduced by the simulation, and the current collapse due to the trapping effect is explained from the view of physics based on the simulation results. In addition, the results show that bulk acceptor traps can influence the gate-lag transient characteristics of AlGaN/GaN HEMTs besides surface traps and that the thermal effect can accelerate the emission of captured electrons for traps. Pulse transient simu-lation is meaningful in analyzing the mechanism of dynamic current collapse, and the work in this paper will benefit the reliability study and model development of GaN-based devices.

  5. Multi-stage pulse tube cryocooler with acoustic impedance constructed to reduce transient cool down time and thermal loss

    Science.gov (United States)

    Gedeon, David R. (Inventor); Wilson, Kyle B. (Inventor)

    2008-01-01

    The cool down time for a multi-stage, pulse tube cryocooler is reduced by configuring at least a portion of the acoustic impedance of a selected stage, higher than the first stage, so that it surrounds the cold head of the selected stage. The surrounding acoustic impedance of the selected stage is mounted in thermally conductive connection to the warm region of the selected stage for cooling the acoustic impedance and is fabricated of a high thermal diffusivity, low thermal radiation emissivity material, preferably aluminum.

  6. System Re-set: High LET Radiation or Transient Musculoskeletal Disuse Cause Lasting Changes in Oxidative Defense Pathways Within Bone

    Science.gov (United States)

    Kumar, Akhilesh; Chatterjee, A.; Alwood, Joshua S.; Dvorochkin, Natalya; Almeida, Eduardo A. C.

    2011-01-01

    Six months post-IR, there were no notable changes in skeletal expression of 84 principal genes in the p53 signaling pathway due to low dose IR (0.5Gy), HU, or both. In contrast, numerous genes relevant to oxidative stress were regulated by the treatments, typically in a direction indicative of increased oxidative stress and impaired defense. IR and HU independently reduced (between 0.46 to 0.88 fold) expression levels of Noxa1, Gpx3, Prdx2, Prdx3, and Zmynd17. Surprisingly, transient HU alone (sham-irradiated) decreased expression of several redox-related genes (Gpx1,Gstk1, Prdx1, Txnrd2), which were not affected significantly by IR alone. Irradiation increased (1.13 fold) expression of a gene responsible for production of superoxides by neutrophils (NCF2). Of interest, only combined treatment with HU and IR led to increased expression levels of Ercc2, (1.19 fold), a DNA excision repair enzyme. Differences in gene expression levels may reflect a change in gene expression on a per cell basis, a shift in the repertoire of specific cell types within the tissue, or both. Serum nitrite/nitrate levels were elevated to comparable levels (1.6-fold) due to IR, HU or both, indicative of elevated systemic nitrosyl stress. CONCLUSIONS The magnitude of changes in skeletal expression of oxidative stress-related genes six months after irradiation and/or transient unloading tended to be relatively modest (0.46-1.15 fold), whereas the p53 pathway was not affected. The finding that many different oxidative stress-related genes differed from controls at this late time point implicates a generalized impairment of oxidative defense within skeletal tissue, which coincides with both profound radiation damage to osteoprogenitors/stem cells in bone marrow and impaired remodeling of mineralized tissue.

  7. Transient Diagnosis and Prognosis for Secondary System in Nuclear Power Plants

    Directory of Open Access Journals (Sweden)

    Sangjun Park

    2016-10-01

    Full Text Available This paper introduces the development of a transient monitoring system to detect the early stage of a transient, to identify the type of the transient scenario, and to inform an operator with the remaining time to turbine trip when there is no operator's relevant control. This study focused on the transients originating from a secondary system in nuclear power plants (NPPs, because the secondary system was recognized to be a more dominant factor to make unplanned turbine-generator trips which can ultimately result in reactor trips. In order to make the proposed methodology practical forward, all the transient scenarios registered in a simulator of a 1,000 MWe pressurized water reactor were archived in the transient pattern database. The transient patterns show plant behavior until turbine-generator trip when there is no operator's intervention. Meanwhile, the operating data periodically captured from a plant computer is compared with an individual transient pattern in the database and a highly matched section among the transient patterns enables isolation of the type of transient and prediction of the expected remaining time to trip. The transient pattern database consists of hundreds of variables, so it is difficult to speedily compare patterns and to draw a conclusion in a timely manner. The transient pattern database and the operating data are, therefore, converted into a smaller dimension using the principal component analysis (PCA. This paper describes the process of constructing the transient pattern database, dealing with principal components, and optimizing similarity measures.

  8. Transient diagnosis and prognosis for secondary system in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Jin; Park, Jin Kyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Heo, Gyun Young [Dept. of Nuclear Engineering, Kyung Hee University, Yongin (Korea, Republic of)

    2016-10-15

    This paper introduces the development of a transient monitoring system to detect the early stage of a transient, to identify the type of the transient scenario, and to inform an operator with the remaining time to turbine trip when there is no operator's relevant control. This study focused on the transients originating from a secondary system in nuclear power plants (NPPs), because the secondary system was recognized to be a more dominant factor to make unplanned turbine-generator trips which can ultimately result in reactor trips. In order to make the proposed methodology practical forward, all the transient scenarios registered in a simulator of a 1,000 MWe pressurized water reactor were archived in the transient pattern database. The transient patterns show plant behavior until turbine-generator trip when there is no operator's intervention. Meanwhile, the operating data periodically captured from a plant computer is compared with an individual transient pattern in the database and a highly matched section among the transient patterns enables isolation of the type of transient and prediction of the expected remaining time to trip. The transient pattern database consists of hundreds of variables, so it is difficult to speedily compare patterns and to draw a conclusion in a timely manner. The transient pattern database and the operating data are, therefore, converted into a smaller dimension using the principal component analysis (PCA). This paper describes the process of constructing the transient pattern database, dealing with principal components, and optimizing similarity measures.

  9. Transient deformational properties of high temperature alloys used in solid oxide fuel cell stacks

    DEFF Research Database (Denmark)

    Tadesse Molla, Tesfaye; Kwok, Kawai; Frandsen, Henrik Lund

    2017-01-01

    Stresses and probability of failure during operation of solid oxide fuel cells (SOFCs) is affected by the deformational properties of the different components of the SOFC stack. Though the overall stress relaxes with time during steady state operation, large stresses would normally appear through...

  10. Determination of Transient Skin Temperature of Conical Bodies During Short-Time, High-Speed Flight

    Science.gov (United States)

    1948-04-06

    technology . ATI documents that are partially legible have been included in the DTIC collection due to their historical value. If you are dissatisfied with...Atmoaphere — Tablea and Data. HACA Rep. Ho. 218, 1925. (Reprint 19*0.) 11. Talen , Haue-Shen: Superaarodynamloa, Mechanics of Rarefied Oases. Jour. Aero. Sei

  11. Transient Behaviour in Highly Dependable Markovian Systems: New Regimes, Multiple Paths

    NARCIS (Netherlands)

    Reijsbergen, Daniël; Boer, de Pieter-Tjerk; Scheinhardt, Werner

    2010-01-01

    In recent years, probabilistic analysis of highly dependable Markovian systems has received considerable attention. Such systems typically consist of several component types, subject to failures, with spare components for replacement while repair is taking place. System failure occurs when all (spar

  12. ELM simulation experiments on Pilot-PSI using simultaneous high flux plasma and transient heat/particle source

    NARCIS (Netherlands)

    De Temmerman, G.; Zielinski, J. J.; van Diepen, S.; Marot, L.; Price, M.

    2011-01-01

    A new experimental setup has been developed for edge localized mode (ELM) simulation experiments with relevant steady-state plasma conditions and transient heat/particle source. The setup is based on the Pilot-PSI linear plasma device and allows the superimposition of a transient heat/particle pulse

  13. The edge transient-current technique (E-TCT) with high energy hadron beam

    Science.gov (United States)

    Gorišek, Andrej; Cindro, Vladimir; Kramberger, Gregor; Mandić, Igor; Mikuž, Marko; Muškinja, Miha; Zavrtanik, Marko

    2016-09-01

    We propose a novel way to investigate the properties of silicon and CVD diamond detectors for High Energy Physics experiments complementary to the already well-established E-TCT technique using laser beam. In the proposed setup the beam of high energy hadrons (MIPs) is used instead of laser beam. MIPs incident on the detector in the direction parallel to the readout electrode plane and perpendicular to the edge of the detector. Such experiment could prove very useful to study CVD diamond detectors that are almost inaccessible for the E-TCT measurements with laser due to large band-gap as well as to verify and complement the E-TCT measurements of silicon. The method proposed is being tested at CERN in a beam of 120 GeV hadrons using a reference telescope with track resolution at the DUT of few μm. The preliminary results of the measurements are presented.

  14. The edge transient-current technique (E-TCT) with high energy hadron beam

    Energy Technology Data Exchange (ETDEWEB)

    Gorišek, Andrej; Cindro, Vladimir; Kramberger, Gregor; Mandić, Igor [J. Stefan Institute, Ljubljana (Slovenia); Mikuž, Marko [J. Stefan Institute, Ljubljana (Slovenia); University of Ljubljana (Slovenia); Muškinja, Miha; Zavrtanik, Marko [J. Stefan Institute, Ljubljana (Slovenia)

    2016-09-21

    We propose a novel way to investigate the properties of silicon and CVD diamond detectors for High Energy Physics experiments complementary to the already well-established E-TCT technique using laser beam. In the proposed setup the beam of high energy hadrons (MIPs) is used instead of laser beam. MIPs incident on the detector in the direction parallel to the readout electrode plane and perpendicular to the edge of the detector. Such experiment could prove very useful to study CVD diamond detectors that are almost inaccessible for the E-TCT measurements with laser due to large band-gap as well as to verify and complement the E-TCT measurements of silicon. The method proposed is being tested at CERN in a beam of 120 GeV hadrons using a reference telescope with track resolution at the DUT of few μm. The preliminary results of the measurements are presented.

  15. Enabling Decadal-level Surveys (High-z GRBs, AGN, Transients) to EXIST

    Science.gov (United States)

    Grindlay, Jonathan E.; Bloom, J.; Coppi, P.; Soderberg, A.; Hong, J.; Moseley, H.; Tagliaferr, G.

    2009-12-01

    The Energetic X-ray Imaging Survey Telescope (EXIST) has completed a Astrophysics Strategic Mission Concept Study (ASMCS) for consideration now by the Astro2010 Decadal Survey as a Medium class mission for the coming decade. EXIST would enable the most sensitive and immediate probes of the physical conditions during the epoch of reionization (EOR) at z 7-15 by its unparalled sensitivity to discover and immediately identify high-z Gamma-ray Bursts (GRBs). With a GRB sensitivity nearly 10X that of Swift, and a proposed onboard optical-IR telescope (IRT) as well as a contributed (Italy) Soft X-ray Imager (SXI), the High Energy Telescope (HET) on EXIST can detect and slew to a mision science and the HET, IRT and SXI are given along with descriptions of how the mission could serve a vast range of science investigations not yet possible.

  16. Transient Formation and Reactivity of a High-Valent Nickel(IV) Oxido Complex

    NARCIS (Netherlands)

    Padamati, Sandeep K.; Angelone, Davide; Draksharapu, Apparao; Primi, Gloria; Martin, David J.; Tromp, Moniek; Swart, Marcel; Browne, Wesley R.

    2017-01-01

    A reactive high-valent dinuclear nickel(IV) oxido bridged complex is reported that can be formed at room temperature by reaction of [(L)2Ni(II)2(μ-X)3]X (X = Cl or Br) with NaOCl in methanol or acetonitrile (where L = 1,4,7-trimethyl-1,4,7-triazacyclononane). The unusual Ni(IV) oxido species is

  17. Gas-Phase Molecular Dynamics: High Resolution Spectroscopy and Collision Dynamics of Transient Species

    Energy Technology Data Exchange (ETDEWEB)

    Hall,G.E.; Sears, T.J.

    2009-04-03

    This research is carried out as part of the Gas-Phase Molecular Dynamics program in the Chemistry Department at Brookhaven National Laboratory. High-resolution spectroscopy, augmented by theoretical and computational methods, is used to investigate the structure and collision dynamics of chemical intermediates in the elementary gas-phase reactions involved in combustion chemistry. Applications and methods development are equally important experimental components of this work.

  18. An Algorithm for Real-Time Optimal Photocurrent Estimation including Transient Detection for Resource-Constrained Imaging Applications

    CERN Document Server

    Zemcov, Michael; Ryan, Matthew; Staniszewski, Zak

    2016-01-01

    Mega-pixel charge-integrating detectors are common in near-IR imaging applications. Optimal signal-to-noise ratio estimates of the photocurrents, which are particularly important in the low-signal regime, are produced by fitting linear models to sequential reads of the charge on the detector. Algorithms that solve this problem have a long history, but can be computationally intensive. Furthermore, the cosmic ray background is appreciable for these detectors in Earth orbit, particularly above the Earth's magnetic poles and the South Atlantic Anomaly, and on-board reduction routines must be capable of flagging affected pixels. In this paper we present an algorithm that generates optimal photocurrent estimates and flags random transient charge generation from cosmic rays, and is specifically designed to fit on a computationally restricted platform. We take as a case study the Spectro-Photometer for the History of the Universe, Epoch of Reionization, and Ices Explorer (SPHEREx), a NASA Small Explorer astrophysics...

  19. Growth Twinning and Generation of High-Frequency Surface Nanostructures in Ultrafast Laser-Induced Transient Melting and Resolidification.

    Science.gov (United States)

    Sedao, Xxx; Shugaev, Maxim V; Wu, Chengping; Douillard, Thierry; Esnouf, Claude; Maurice, Claire; Reynaud, Stéphanie; Pigeon, Florent; Garrelie, Florence; Zhigilei, Leonid V; Colombier, Jean-Philippe

    2016-07-26

    The structural changes generated in surface regions of single crystal Ni targets by femtosecond laser irradiation are investigated experimentally and computationally for laser fluences that, in the multipulse irradiation regime, produce sub-100 nm high spatial frequency surface structures. Detailed experimental characterization of the irradiated targets combining electron back scattered diffraction analysis with high-resolution transmission electron microscopy reveals the presence of multiple nanoscale twinned domains in the irradiated surface regions of single crystal targets with (111) surface orientation. Atomistic- and continuum-level simulations performed for experimental irradiation conditions reproduce the generation of twinned domains and establish the conditions leading to the formation of growth twin boundaries in the course of the fast transient melting and epitaxial regrowth of the surface regions of the irradiated targets. The observation of growth twins in the irradiated Ni(111) targets provides strong evidence of the role of surface melting and resolidification in the formation of high spatial frequency surface structures. This also suggests that the formation of twinned domains can be used as a sensitive measure of the levels of liquid undercooling achieved in short pulse laser processing of metals.

  20. Effect of high-flux H/He plasma exposure on tungsten damage due to transient heat loads

    Energy Technology Data Exchange (ETDEWEB)

    De Temmerman, G., E-mail: gregory.detemmerman@iter.org [FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Trilateral Euregion Cluster, Postbus 1207, 3430BE Nieuwegein (Netherlands); ITER Organization, Route de Vinon sur Verdon, CS 90 096, 13067 Saint Paul-lez-Durance (France); Morgan, T.W.; Eden, G.G. van; Kruif, T. de [FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, Association EURATOM-FOM, Trilateral Euregion Cluster, Postbus 1207, 3430BE Nieuwegein (Netherlands); Wirtz, M. [Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research – Microstructure and Properties of Materials (IEK-2), EURATOM Association, 52425 Jülich (Germany); Matejicek, J.; Chraska, T. [Institute of Plasma Physics, Association EURATOM-IPP, CR Prague (Czech Republic); Pitts, R.A. [ITER Organization, Route de Vinon sur Verdon, CS 90 096, 13067 Saint Paul-lez-Durance (France); Wright, G.M. [MIT Plasma Science and Fusion Center, 77 Massachusetts Ave., Cambridge, MA 02139 (United States)

    2015-08-15

    The thermal shock behaviour of tungsten exposed to high-flux plasma is studied using a high-power laser. The cases of laser-only, sequential laser and hydrogen (H) plasma and simultaneous laser plus H plasma exposure are studied. H plasma exposure leads to an embrittlement of the material and the appearance of a crack network originating from the centre of the laser spot. Under simultaneous loading, significant surface melting is observed. In general, H plasma exposure lowers the heat flux parameter (F{sub HF}) for the onset of surface melting by ∼25%. In the case of He-modified (fuzzy) surfaces, strong surface deformations are observed already after 1000 laser pulses at moderate F{sub HF} = 19 MJ m{sup −2} s{sup −1/2}, and a dense network of fine cracks is observed. These results indicate that high-fluence ITER-like plasma exposure influences the thermal shock properties of tungsten, lowering the permissible transient energy density beyond which macroscopic surface modifications begin to occur.

  1. Transient osteoporosis.

    Science.gov (United States)

    Korompilias, Anastasios V; Karantanas, Apostolos H; Lykissas, Marios G; Beris, Alexandros E

    2008-08-01

    Transient osteoporosis is characterized primarily by bone marrow edema. The disease most commonly affects the hip, knee, and ankle in middle-aged men. Its cause remains unknown. The hallmark that separates transient osteoporosis from other conditions presenting with a bone marrow edema pattern is its self-limited nature. Laboratory tests usually do not contribute to the diagnosis. Plain radiographs may reveal regional osseous demineralization. Magnetic resonance imaging is used primarily for early diagnosis and monitoring disease progression. Early differentiation from more aggressive conditions with long-term sequelae is essential to avoid unnecessary treatment. Clinical entities such as transient osteoporosis of the hip and regional migratory osteoporosis are spontaneously resolving conditions. However, early differential diagnosis and surgical treatment are crucial for the patient with osteonecrosis of the hip or knee.

  2. Statistical Searches for Microlensing Events in Large, Non-Uniformly Sampled Time-Domain Surveys: A Test Using Palomar Transient Factory Data

    CERN Document Server

    Agüeros, Adrian M Price-Whelan Marcel A; Street, Rachel; Ofek, Eran O; Covey, Kevin R; Levitan, David; Laher, Russ R; Sesar, Branimir; Surace, Jason

    2013-01-01

    Many photometric time-domain surveys are driven by specific goals, such as searches for supernovae or transiting exoplanets, which set the cadence with which fields are re-imaged. In the case of the Palomar Transient Factory (PTF), several sub-surveys are conducted in parallel, leading to non-uniform sampling over its $\\sim$$20,000 \\mathrm{deg}^2$ footprint. While the median $7.26 \\mathrm{deg}^2$ PTF field has been imaged $\\sim$40 times in \\textit{R}-band, $\\sim$$2300 \\mathrm{deg}^2$ have been observed $>$100 times. We use PTF data to study the trade-off between searching for microlensing events in a survey whose footprint is much larger than that of typical microlensing searches, but with far-from-optimal time sampling. To examine the probability that microlensing events can be recovered in these data, we test statistics used on uniformly sampled data to identify variables and transients. We find that the von Neumann ratio performs best for identifying simulated microlensing events in our data. We develop a ...

  3. Summary of transient high-voltage calculations for the FRX-C experiment

    Energy Technology Data Exchange (ETDEWEB)

    Kewish, R.W. Jr.; Rej, D.J.

    1982-06-01

    Calculations of the electrical circuit equations are performed over a wide range of parameters corresponding to the FRX-C field-reversed THETA-pinch experiment at Los Alamos. Without any plasma or external damping, serious voltage doubling and quadrupling of the main capacitor bank charge voltage are observed. These oscillating high voltages are found to be adequately suppressed by the strategic placement of external snubber circuitry. On the other hand, no doubling of the THETA-pinch preionization bank charge voltage is found. Calculations of the equations for the z-pinch preionization circuit are also performed.

  4. RNAi-mediated suppression of isoprene emission in poplar transiently impacts phenolic metabolism under high temperature and high light intensities: a transcriptomic and metabolomic analysis.

    Science.gov (United States)

    Behnke, Katja; Kaiser, Andreas; Zimmer, Ina; Brüggemann, Nicolas; Janz, Dennis; Polle, Andrea; Hampp, Rüdiger; Hänsch, Robert; Popko, Jennifer; Schmitt-Kopplin, Philippe; Ehlting, Barbara; Rennenberg, Heinz; Barta, Csengele; Loreto, Francesco; Schnitzler, Jörg-Peter

    2010-09-01

    In plants, isoprene plays a dual role: (a) as thermo-protective agent proposed to prevent degradation of enzymes/membrane structures involved in photosynthesis, and (b) as reactive molecule reducing abiotic oxidative stress. The present work addresses the question whether suppression of isoprene emission interferes with genome wide transcription rates and metabolite fluxes in grey poplar (Populus x canescens) throughout the growing season. Gene expression and metabolite profiles of isoprene emitting wild type plants and RNAi-mediated non-isoprene emitting poplars were compared by using poplar Affymetrix microarrays and non-targeted FT-ICR-MS (Fourier transform ion cyclotron resonance mass spectrometry). We observed a transcriptional down-regulation of genes encoding enzymes of phenylpropanoid regulatory and biosynthetic pathways, as well as distinct metabolic down-regulation of condensed tannins and anthocyanins, in non-isoprene emitting genotypes during July, when high temperature and light intensities possibly caused transient drought stress, as indicated by stomatal closure. Under these conditions leaves of non-isoprene emitting plants accumulated hydrogen peroxide (H(2)O(2)), a signaling molecule in stress response and negative regulator of anthocyanin biosynthesis. The absence of isoprene emission under high temperature and light stress resulted transiently in a new chemo(pheno)type with suppressed production of phenolic compounds. This may compromise inducible defenses and may render non-isoprene emitting poplars more susceptible to environmental stress.

  5. Measurement of Fast Voltage Transients in High-Performance Nb3Sn Magnets

    Energy Technology Data Exchange (ETDEWEB)

    Lietzke, A. F.; Sabbi., G. L.; Ferracin, P.; Caspi, S.; Zimmerman, S.; Joseph, J.; Doering, D.; Lizarazo, J.

    2008-06-01

    The Superconducting Magnet group at Lawrence Berkeley National Laboratory has been developing Nb{sub 3}Sn high-field accelerator magnet technology for the last fifteen years. In order to support the magnet R&D effort, we are developing a diagnostic system that can help identify the causes of performance limiting quenches by recording small flux-changes within the magnet prior to quench-onset. These analysis techniques were applied to the test results from recent Nb{sub 3}Sn magnets. This paper will examine various types of events and their distinguishing characteristics. The present measurement techniques are discussed along with the design of a new data acquisition system that will substantially improve the quality of the recorded signals.

  6. Transient increase of intact visual field size by high-frequency narrow-band stimulation.

    Science.gov (United States)

    Elliott, Mark A; Seifert, Doerthe; Poggel, Dorothe A; Strasburger, Hans

    2015-03-01

    Three patients with visual field defects were stimulated with a square matrix pattern, either static, or flickering at frequencies that had been found to either promote or not promote blindsight performance. Comparison between pre- and post-stimulation perimetric maps revealed an increase in the size of the intact visual field but only for flicker frequencies previously found to promote blindsight. These changes were temporary but dramatic - in two instances the intact field was increased by an area of ∼30 deg(2) of visual angle. These results indicate that not only does specific high-frequency stimulus flicker promote blindsight, but that intact visual field size may be increased by stimulation at the same frequencies. Our findings inform speculation on both the brain mechanisms and the potency of temporal modulation for altering the functional visual field.

  7. Electromechanical systems with transient high power response operating from a resonant ac link

    Science.gov (United States)

    Burrows, Linda M.; Hansen, Irving G.

    1992-01-01

    The combination of an inherently robust asynchronous (induction) electrical machine with the rapid control of energy provided by a high frequency resonant ac link enables the efficient management of higher power levels with greater versatility. This could have a variety of applications from launch vehicles to all-electric automobiles. These types of systems utilize a machine which is operated by independent control of both the voltage and frequency. This is made possible by using an indirect field-oriented control method which allows instantaneous torque control all four operating quadrants. Incorporating the ac link allows the converter in these systems to switch at the zero crossing of every half cycle of the ac waveform. This zero loss switching of the link allows rapid energy variations to be achieved without the usual frequency proportional switching loss. Several field-oriented control systems were developed under contract to NASA.

  8. High intensity single bunch operation with heavy periodic transient beam loading in wide band rf cavities

    Science.gov (United States)

    Tamura, Fumihiko; Hotchi, Hideaki; Schnase, Alexander; Yoshii, Masahito; Yamamoto, Masanobu; Ohmori, Chihiro; Nomura, Masahiro; Toda, Makoto; Shimada, Taihei; Hasegawa, Katsushi; Hara, Keigo

    2015-09-01

    The rapid cycling synchrotron (RCS) in the Japan Proton Accelerator Research Complex (J-PARC) was originally designed to accelerate two high intensity bunches, while some of neutron experiments in the materials and life science experimental facility and a muon experiment using main ring beams require a single bunch operation mode, in which one of the two rf buckets is filled and the other is empty. The beam intensity in the single bunch operation has been limited by longitudinal beam losses due to the rf bucket distortions by the wake voltage of the odd harmonics (h =1 ,3 ,5 ) in the wide band magnetic alloy cavities. We installed an additional rf feedforward system to compensate the wake voltages of the odd harmonics (h =1 ,3 ,5 ). The additional system has a similar structure as the existing feedforward system for the even harmonics (h =2 ,4 ,6 ). We describe the function of the feedforward system for the odd harmonics, the commissioning methodology, and the commissioning results. The longitudinal beam losses during the single bunch acceleration disappeared with feedforward for the odd harmonics. We also confirmed that the beam quality in the single bunch acceleration are similar to that of the normal operation with two bunches. Thus, high intensity single bunch acceleration at the intensity of 2.3 ×1013 protons per bunch has been achieved in the J-PARC RCS. This article is a follow-up of our previous article, Phys. Rev. ST Accel. Beams 14, 051004 (2011). The feedforward system extension for single bunch operation was successful.

  9. Intermediate Palomar Transient Factory: Realtime Image Subtraction Pipeline

    CERN Document Server

    Cao, Yi; Kasliwal, Mansi M

    2016-01-01

    A fast-turnaround pipeline for realtime data reduction plays an essential role in discovering and permitting follow-up observations to young supernovae and fast-evolving transients in modern time-domain surveys. In this paper, we present the realtime image subtraction pipeline in the intermediate Palomar Transient Factory. By using high-performance computing, efficient database, and machine learning algorithms, this pipeline manages to reliably deliver transient candidates within ten minutes of images being taken. Our experience in using high performance computing resources to process big data in astronomy serves as a trailblazer to dealing with data from large-scale time-domain facilities in near future.

  10. Numerical simulation of transient, incongruent vaporization induced by high power laser

    Energy Technology Data Exchange (ETDEWEB)

    Tsai, C.H.

    1981-01-01

    A mathematical model and numerical calculations were developed to solve the heat and mass transfer problems specifically for uranum oxide subject to laser irradiation. It can easily be modified for other heat sources or/and other materials. In the uranium-oxygen system, oxygen is the preferentially vaporizing component, and as a result of the finite mobility of oxygen in the solid, an oxygen deficiency is set up near the surface. Because of the bivariant behavior of uranium oxide, the heat transfer problem and the oxygen diffusion problem are coupled and a numerical method of simultaneously solving the two boundary value problems is studied. The temperature dependence of the thermal properties and oxygen diffusivity, as well as the highly ablative effect on the surface, leads to considerable non-linearities in both the governing differential equations and the boundary conditions. Based on the earlier work done in this laboratory by Olstad and Olander on Iron and on Zirconium hydride, the generality of the problem is expanded and the efficiency of the numerical scheme is improved. The finite difference method, along with some advanced numerical techniques, is found to be an efficient way to solve this problem.

  11. Transient pressure measurements at part load operating condition of a high head model Francis turbine

    Indian Academy of Sciences (India)

    RAHUL GOYAL; CHIRAG TRIVEDI; B K GANDHI; MICHEL J CERVANTES; OLE G DAHLHAUG

    2016-11-01

    Hydraulic turbines are operating at part load conditions depending on availability of hydraulic energy or to meet the grid requirements. The turbine experiences more fatigue during the part load operating conditions due to flow phenomena such as vortex breakdown in the draft tube and flow instability in the runner.The present paper focuses on the investigation of a high head model Francis turbine operating at 50% load.Pressure measurements have been carried out experimentally on a model Francis turbine. Total six pressure sensors were mounted inside the turbine and other two pressure sensors were mounted at the turbine inlet pipe. It is observed that the turbine experiences significant pressure fluctuations at the vaneless space and the runner.Moreover, a standing wave is observed between the pressure tank outlet and the turbine inlet. Analysis of the data acquired by the pressure sensors mounted in the draft tube showed the presence of vortex breakdown corotating with the runner. The detailed analysis showed the rotating and plunging components of the vortex breakdown. The influence of the rotating component was observed in the entire hydraulic circuit includingdistributor and turbine inlet but not the plunging one.

  12. Transient virulence of emerging pathogens.

    Science.gov (United States)

    Bolker, Benjamin M; Nanda, Arjun; Shah, Dharmini

    2010-05-06

    Should emerging pathogens be unusually virulent? If so, why? Existing theories of virulence evolution based on a tradeoff between high transmission rates and long infectious periods imply that epidemic growth conditions will select for higher virulence, possibly leading to a transient peak in virulence near the beginning of an epidemic. This transient selection could lead to high virulence in emerging pathogens. Using a simple model of the epidemiological and evolutionary dynamics of emerging pathogens, along with rough estimates of parameters for pathogens such as severe acute respiratory syndrome, West Nile virus and myxomatosis, we estimated the potential magnitude and timing of such transient virulence peaks. Pathogens that are moderately evolvable, highly transmissible, and highly virulent at equilibrium could briefly double their virulence during an epidemic; thus, epidemic-phase selection could contribute significantly to the virulence of emerging pathogens. In order to further assess the potential significance of this mechanism, we bring together data from the literature for the shapes of tradeoff curves for several pathogens (myxomatosis, HIV, and a parasite of Daphnia) and the level of genetic variation for virulence for one (myxomatosis). We discuss the need for better data on tradeoff curves and genetic variance in order to evaluate the plausibility of various scenarios of virulence evolution.

  13. Calculations of near-field emissions in frequency-domain into time-dependent data with arbitrary wave form transient perturbations

    Directory of Open Access Journals (Sweden)

    Y. Liu

    2012-09-01

    Full Text Available This paper is devoted on the application of the computational method for calculating the transient electromagnetic (EM near-field (NF radiated by electronic structures from the frequency-dependent data for the arbitrary wave form perturbations i(t. The method proposed is based on the fast Fourier transform (FFT. The different steps illustrating the principle of the method is described. It is composed of three successive steps: the synchronization of the input excitation spectrum I(f and the given frequency data H0(f, the convolution of the two inputs data and then, the determination of the time-domain emissions H(t. The feasibility of the method is verified with standard EM 3D simulations. In addition to this method, an extraction technique of the time-dependent z-transversal EM NF component Xz(t from the frequency-dependent x- and y- longitudinal components Hx(f and Hy(f is also presented. This technique is based on the conjugation of the plane wave spectrum (PWS transform and FFT. The feasibility of the method is verified with a set of dipole radiations. The method introduced in this paper is particularly useful for the investigation of time-domain emissions for EMC applications by considering transient EM interferences (EMIs.

  14. Real-time 4D ERT monitoring of river water intrusion into a former nuclear disposal site using a transient warping-mesh water table boundary (Invited)

    Science.gov (United States)

    Johnson, T.; Hammond, G. E.; Versteeg, R. J.; Zachara, J. M.

    2013-12-01

    The Hanford 300 Area, located adjacent to the Columbia River in south-central Washington, USA, is the site of former research and uranium fuel rod fabrication facilities. Waste disposal practices at site included discharging between 33 and 59 metric tons of uranium over a 40 year period into shallow infiltration galleries, resulting in persistent uranium contamination within the vadose and saturated zones. Uranium transport from the vadose zone to the saturated zone is intimately linked with water table fluctuations and river water intrusion driven by upstream dam operations. As river stage increases, the water table rises into the vadose zone and mobilizes contaminated pore water. At the same time, river water moves inland into the aquifer, and river water chemistry facilitates further mobilization by enabling uranium desorption from contaminated sediments. As river stage decreases, flow moves toward the river, ultimately discharging contaminated water at the river bed. River water specific conductance at the 300 Area varies around 0.018 S/m whereas groundwater specific conductance varies around 0.043 S/m. This contrast provides the opportunity to monitor groundwater/river water interaction by imaging changes in bulk conductivity within the saturated zone using time-lapse electrical resistivity tomography. Previous efforts have demonstrated this capability, but have also shown that disconnecting regularization constraints at the water table is critical for obtaining meaningful time-lapse images. Because the water table moves with time, the regularization constraints must also be transient to accommodate the water table boundary. This was previously accomplished with 2D time-lapse ERT imaging by using a finely discretized computational mesh within the water table interval, enabling a relatively smooth water table to be defined without modifying the mesh. However, in 3D this approach requires a computational mesh with an untenable number of elements. In order to

  15. The High Time Resolution Universe Survey - III. Single-pulse searches and preliminary analysis

    CERN Document Server

    Burke-Spolaor, S; Johnston, S; Bates, S D; Bhat, N D R; Burgay, M; D'Amico, N; Jameson, A; Keith, M J; Kramer, M; Levin, L; Milia, S; Possenti, A; Stappers, B; van Straten, W

    2011-01-01

    We present the search methods and initial results for transient radio signals in the High Time Resolution Universe (HTRU) Survey. The HTRU survey's single-pulse search, the software designed to perform the search, and a determination of the HTRU survey's sensitivity to single pulses are described. Initial processing of a small fraction of the survey has produced 11 discoveries, all of which are sparsely-emitting neutron stars, as well as provided confirmation of two previously unconfirmed neutron stars. Most of the newly discovered objects lie in regions surveyed previously, indicating both the improved sensitivity of the HTRU survey observing system and the dynamic nature of the radio sky. The cycles of active and null states in nulling pulsars, rotating radio transients (RRATs), and long-term intermittent pulsars are explored in the context of determining the relationship between these populations, and of the sensitivity of a search to the various radio-intermittent neutron star populations. This analysis s...

  16. Observation of Transient Overcritical Currents in YBCO Thin Films using High-Speed Magneto-Optical Imaging and Dynamic Current Mapping

    Science.gov (United States)

    Wells, Frederick S.; Pan, Alexey V.; Golovchanskiy, Igor A.; Fedoseev, Sergey A.; Rozenfeld, Anatoly

    2017-01-01

    The dynamics of transient current distributions in superconducting YBa2Cu3O7−δ thin films were investigated during and immediately following an external field ramp, using high-speed (real-time) Magneto-Optical Imaging and calculation of dynamic current profiles. A number of qualitatively unique and previously unobserved features are seen in this novel analysis of the evolution of supercurrent during penetration. As magnetic field ramps up from zero, the dynamic current profile is characterized by strong peaks, the magnitude of which exceed the conventional critical current density (as determined from static current profiles). These peaks develop close to the sample edges, initially resembling screening currents but quickly growing in intensity as the external field increases. A discontinuity in field and current behaviour is newly observed, indicating a novel transition from increasing peak current toward relaxation behaviour. After this transition, the current peaks move toward the centre of the sample while reducing in intensity as magnetic vortices penetrate inward. This motion slows exponentially with time, with the current distribution in the long-time limit reducing to the expected Kim-model profile. PMID:28067331

  17. Observation of Transient Overcritical Currents in YBCO Thin Films using High-Speed Magneto-Optical Imaging and Dynamic Current Mapping.

    Science.gov (United States)

    Wells, Frederick S; Pan, Alexey V; Golovchanskiy, Igor A; Fedoseev, Sergey A; Rozenfeld, Anatoly

    2017-01-09

    The dynamics of transient current distributions in superconducting YBa2Cu3O7-δ thin films were investigated during and immediately following an external field ramp, using high-speed (real-time) Magneto-Optical Imaging and calculation of dynamic current profiles. A number of qualitatively unique and previously unobserved features are seen in this novel analysis of the evolution of supercurrent during penetration. As magnetic field ramps up from zero, the dynamic current profile is characterized by strong peaks, the magnitude of which exceed the conventional critical current density (as determined from static current profiles). These peaks develop close to the sample edges, initially resembling screening currents but quickly growing in intensity as the external field increases. A discontinuity in field and current behaviour is newly observed, indicating a novel transition from increasing peak current toward relaxation behaviour. After this transition, the current peaks move toward the centre of the sample while reducing in intensity as magnetic vortices penetrate inward. This motion slows exponentially with time, with the current distribution in the long-time limit reducing to the expected Kim-model profile.

  18. Observation of Transient Overcritical Currents in YBCO Thin Films using High-Speed Magneto-Optical Imaging and Dynamic Current Mapping

    Science.gov (United States)

    Wells, Frederick S.; Pan, Alexey V.; Golovchanskiy, Igor A.; Fedoseev, Sergey A.; Rozenfeld, Anatoly

    2017-01-01

    The dynamics of transient current distributions in superconducting YBa2Cu3O7‑δ thin films were investigated during and immediately following an external field ramp, using high-speed (real-time) Magneto-Optical Imaging and calculation of dynamic current profiles. A number of qualitatively unique and previously unobserved features are seen in this novel analysis of the evolution of supercurrent during penetration. As magnetic field ramps up from zero, the dynamic current profile is characterized by strong peaks, the magnitude of which exceed the conventional critical current density (as determined from static current profiles). These peaks develop close to the sample edges, initially resembling screening currents but quickly growing in intensity as the external field increases. A discontinuity in field and current behaviour is newly observed, indicating a novel transition from increasing peak current toward relaxation behaviour. After this transition, the current peaks move toward the centre of the sample while reducing in intensity as magnetic vortices penetrate inward. This motion slows exponentially with time, with the current distribution in the long-time limit reducing to the expected Kim-model profile.

  19. Real time measurement of transient event emissions of air toxics by tomographic remote sensing in tandem with mobile monitoring

    Science.gov (United States)

    Olaguer, Eduardo P.; Stutz, Jochen; Erickson, Matthew H.; Hurlock, Stephen C.; Cheung, Ross; Tsai, Catalina; Colosimo, Santo F.; Festa, James; Wijesinghe, Asanga; Neish, Bradley S.

    2017-02-01

    During the Benzene and other Toxics Exposure (BEE-TEX) study, a remote sensing network based on long path Differential Optical Absorption Spectroscopy (DOAS) was set up in the Manchester neighborhood beside the Ship Channel of Houston, Texas in order to perform Computer Aided Tomography (CAT) scans of hazardous air pollutants. On 18-19 February 2015, the CAT scan network detected large nocturnal plumes of toluene and xylenes most likely associated with railcar loading and unloading operations at Ship Channel petrochemical facilities. The presence of such plumes during railcar operations was confirmed by a mobile laboratory equipped with a Proton Transfer Reaction-Mass Spectrometer (PTR-MS), which measured transient peaks of toluene and C2-benzenes of 50 ppb and 57 ppb respectively around 4 a.m. LST on 19 February 2015. Plume reconstruction and source attribution were performed using the 4D variational data assimilation technique and a 3D micro-scale forward and adjoint air quality model based on both tomographic and PTR-MS data. Inverse model estimates of fugitive emissions associated with railcar transfer emissions ranged from 2.0 to 8.2 kg/hr for toluene and from 2.2 to 3.5 kg/hr for xylenes in the early morning of 19 February 2015.

  20. Highly sensitive transient isotachophoresis sample stacking coupling with capillary electrophoresis-amperometric detection for analysis of doping substances.

    Science.gov (United States)

    Zheng, Lihui; Zhang, Lan; Tong, Ping; Zheng, Xinyu; Chi, Yuwu; Chen, Guonan

    2010-06-15

    A simple and effective method of capillary electrophoresis-amperometric detection (CE-AD) coupled with transient isotachophoresis (tITP) was developed for the trace determination of doping substances. Compared with the conventional capillary electrophoresis method, the maximum enhancement factor in terms of peak heights was up to 5500-fold when the tITP technique was adopted. Under the optimum conditions, the detection limit (S/N=3) for methylephedrine (MDP), celiprolol (CEL), sotalol (SOT) and indapamide (IDP) were 4.2 x 10(-14), 6.3 x 10(-13), 5.8 x 10(-14) and 9.5 x 10(-13)molL(-1), respectively. The RSDs of four analytes were 1.0-2.3% for migration time and 2.6-3.8% for peak current, respectively. The proposed method was successfully applied to determine the contents of SOT and IDP in real urine sample, and the excretion curve of IDP within 48h was also investigated. The recoveries of the four doping in urine ranged from 90.0 to 102%.

  1. Rapid, transient, and highly localized induction of plastidial omega-3 fatty acid desaturase mRNA at fungal infection sites in Petroselinum crispum.

    Science.gov (United States)

    Kirsch, C; Takamiya-Wik, M; Reinold, S; Hahlbrock, K; Somssich, I E

    1997-03-04

    Parsley (Petroselinum crispum) plants and suspension-cultured cells have been used extensively for studies of non-host-resistance mechanisms in plant/pathogen interactions. We now show that treatment of cultured parsley cells with a defined peptide elicitor of fungal origin causes rapid and large changes in the levels of various unsaturated fatty acids. While linoleic acid decreased and linolenic acid increased steadily for several hours, comparatively sharp increases in oleic acid followed a biphasic time course. In contrast, the overall level of stearic acid remained unaffected. Using a PCR-based approach, a parsley cDNA was isolated sharing high sequence similarity with omega-3 fatty acid desaturases. Subsequent isolation and characterization of a full-length cDNA enabled its functional identification as a plastid-localized omega-3 fatty acid desaturase by complementation of the Arabidopsis thaliana fad7/8 double mutant which is low in trienoic fatty acids. omega-3 Fatty acid desaturase mRNA accumulated rapidly and transiently in elicitor-treated cultured parsley cells, protoplasts, and leaves, as well as highly localized around fungal infection sites in parsley leaf buds. These results indicate that unsaturated fatty acid metabolism is yet another component of the highly complex, transcriptionally regulated pathogen defense response in plants.

  2. An Introduction to System-Level, Steady-State and Transient Modeling and Optimization of High-Power-Density Thermoelectric Generator Devices Made of Segmented Thermoelectric Elements

    Science.gov (United States)

    Crane, D. T.

    2011-05-01

    High-power-density, segmented, thermoelectric (TE) elements have been intimately integrated into heat exchangers, eliminating many of the loss mechanisms of conventional TE assemblies, including the ceramic electrical isolation layer. Numerical models comprising simultaneously solved, nonlinear, energy balance equations have been created to simulate these novel architectures. Both steady-state and transient models have been created in a MATLAB/Simulink environment. The models predict data from experiments in various configurations and applications over a broad range of temperature, flow, and current conditions for power produced, efficiency, and a variety of other important outputs. Using the validated models, devices and systems are optimized using advanced multiparameter optimization techniques. Devices optimized for particular steady-state operating conditions can then be dynamically simulated in a transient operating model. The transient model can simulate a variety of operating conditions including automotive and truck drive cycles.

  3. Safety and efficacy of intensive vs. guideline antiplatelet therapy in high-risk patients with recent ischemic stroke or transient ischemic attack

    DEFF Research Database (Denmark)

    Christensen, Hanne Krarup

    2015-01-01

    RATIONALE: The risk of recurrence following a stroke or transient ischemic attack is high, especially immediately after the event. HYPOTHESIS: Because two antiplatelet agents are superior to one in patients with non-cardioembolic events, more intensive treatment might be even more effective. SAMP...

  4. The Zwicky Transient Facility

    Science.gov (United States)

    Kulkarni, Shrinivas R.

    2016-01-01

    The Zwicky Transient Facility (ZTF) has been designed with a singular focus: a systematic exploration of the night sky at a magnitude level well suited for spectral classification and follow up with the existing class of 4-m to 10-m class telescopes. ZTF is the successor to the Palomar Transient Factory (PTF). The discovery engine for ZTF is a 47 square degree camera (realized through 16 e2V monolithic CCDs) that fills the entire focal plane of the 48-inch Oschin telescope of the Palomar Observatory. Single 30-s epoch sensitivity is about 20.5 in g and R bands. The Infarared Processing & Analysis Center (IPAC) is the data center for ZTF. ZTF is a public-private partnership with equal contributions from a consortium of world-wide partners and an NSF MSIP grant. Forty percent of ZTF time is set aside for two major community surveys: a 3-day cadence survey of high latitudes (to mimic LSST) and a time domain survey of the entire Northern Galactic plane. We expect first light in February 2017 and begin a 3-year survey starting summer of 2017. The first year will be spent on building up deep reference images of the sky (a must for transient surveys). During the second year IPAC will deliver near archival quality photometric products within 12 hours of observations. By comparison to reference images photometric alerts will be sent out. Year 3 will see the near real-time release of image differencing products. A Community Science Advisory Committee (CSAC), chaired by S. Ridgway (NOAO), has been set up to both advise the PI and to ensure that the US community's interests are well served. Astronomers interested in getting a head start on ZTF may wish to peruse the data releases from PTF. Young people (or young at heart) may wish to attend the annual summer school on PTF/ZTF (August, Caltech campus). The Principal Investigator (PI) for the project is S. Kulkarni and the Project Scientist is Eric Bellm.For further details please consult http://www.ptf.caltech.edu/ztf

  5. The relationship between ultra-high frequency thresholds and transient evoked otoacoustic emissions in adults with tinnitus.

    Science.gov (United States)

    Omidvar, Shaghayegh; Jafari, Zahra; Mahmoudian, Saeid; Khabazkhoob, Mehdi; Ahadi, Mohsen; Yazdani, Nasrin

    2016-01-01

    Background: The possible role of cochlear function in tinnitus generation is still a matter of debate. To assess the role of outer hair cell dysfunction in tinnitus and its possible relationship with ultra-high frequency (UHF) hearing sensitivity, transient evoked otoacoustic emissions (TEOAE) and UHF hearing thresholds were investigated in normal hearing individuals with and without tinnitus. Methods: Eighteen individuals with tinnitus and 22 without tinnitus participated in this study. TEOAE was recorded with click stimulus at 80 dBpeSPL. UHF pure tone audiometry was performed at 10, 12.5, 16, and 18 kHz. Results: TEOAE was significantly abnormal in 72.2% of the tinnitus, and 18.2% of the control groups (p=0.001). The individuals with tinnitus had significantly poorer UHF hearing sensitivity compared to the control group at 12.5 and 18 kHz (p≤0.048). There was a stronger correlation between increasing UHFs hearing threshold and decreasing SNRs of TEOAEs in the tinnitus group compared to the controls. Conclusion: Our study revealed poorer UHF hearing thresholds and more TEOAE abnormalities in normal hearing individuals with tinnitus compared to the controls. Perhaps the alterations in the basal cochlea, following a decrease in UHF hearing sensitivity, affect OAEs that are originated from more apical cochlear parts in tinnitus ears more than non-tinnitus ears.

  6. Simultaneous transient operation of a high head hydro power plant and a storage pumping station in the same hydraulic scheme

    Science.gov (United States)

    Bucur, D. M.; Dunca, G.; Cervantes, M. J.; Cǎlinoiu, C.; Isbǎşoiu, E. C.

    2014-03-01

    This paper presents an on-site experimental analysis of a high head hydro power plant and a storage pumping station, in an interconnected complex hydraulic scheme during simultaneous transient operation. The investigated hydropower site has a unique structure as the pumping station discharges the water into the hydropower plant penstock. The operation regimes were chosen for critical scenarios such as sudden load rejections of the turbines as well as start-ups and stops with different combinations of the hydraulic turbines and pumps operation. Several parameters were simultaneously measured such as the pumped water discharge, the pressure at the inlet pump section, at the outlet of the pumps and at the vane house of the hydraulic power plant surge tank. The results showed the dependence of the turbines and the pumps operation. Simultaneous operation of the turbines and the pumps is possible in safe conditions, without endangering the machines or the structures. Furthermore, simultaneous operation of the pumping station together with the hydropower plant increases the overall hydraulic efficiency of the site since shortening the discharge circuit of the pumps.

  7. The relationship between ultra-high frequency thresholds and transient evoked otoacoustic emissions in adults with tinnitus

    Science.gov (United States)

    Omidvar, Shaghayegh; Jafari, Zahra; Mahmoudian, Saeid; Khabazkhoob, Mehdi; Ahadi, Mohsen; Yazdani, Nasrin

    2016-01-01

    Background: The possible role of cochlear function in tinnitus generation is still a matter of debate. To assess the role of outer hair cell dysfunction in tinnitus and its possible relationship with ultra-high frequency (UHF) hearing sensitivity, transient evoked otoacoustic emissions (TEOAE) and UHF hearing thresholds were investigated in normal hearing individuals with and without tinnitus. Methods: Eighteen individuals with tinnitus and 22 without tinnitus participated in this study. TEOAE was recorded with click stimulus at 80 dBpeSPL. UHF pure tone audiometry was performed at 10, 12.5, 16, and 18 kHz. Results: TEOAE was significantly abnormal in 72.2% of the tinnitus, and 18.2% of the control groups (p=0.001). The individuals with tinnitus had significantly poorer UHF hearing sensitivity compared to the control group at 12.5 and 18 kHz (p≤0.048). There was a stronger correlation between increasing UHFs hearing threshold and decreasing SNRs of TEOAEs in the tinnitus group compared to the controls. Conclusion: Our study revealed poorer UHF hearing thresholds and more TEOAE abnormalities in normal hearing individuals with tinnitus compared to the controls. Perhaps the alterations in the basal cochlea, following a decrease in UHF hearing sensitivity, affect OAEs that are originated from more apical cochlear parts in tinnitus ears more than non-tinnitus ears. PMID:28210614

  8. Periodic Limb Movements and White Matter Hyperintensities in First-Ever Minor Stroke or High-Risk Transient Ischemic Attack.

    Science.gov (United States)

    Boulos, Mark I; Murray, Brian J; Muir, Ryan T; Gao, Fuqiang; Szilagyi, Gregory M; Huroy, Menal; Kiss, Alexander; Walters, Arthur S; Black, Sandra E; Lim, Andrew S; Swartz, Richard H

    2017-03-01

    Emerging evidence suggests that periodic limb movements (PLMs) may contribute to the development of cerebrovascular disease. White matter hyperintensities (WMHs), a widely accepted biomarker for cerebral small vessel disease, are associated with incident stroke and death. We evaluated the association between increased PLM indices and WMH burden in patients presenting with stroke or transient ischemic attack (TIA), while controlling for vascular risk factors and stroke severity. Thirty patients presenting within 2 weeks of a first-ever minor stroke or high-risk TIA were prospectively recruited. PLM severity was measured with polysomnography. WMH burden was quantified using the Age Related White Matter Changes (ARWMC) scale based on neuroimaging. Partial Spearman's rank-order correlations and multiple linear regression models tested the association between WMH burden and PLM severity. Greater WMH burden was correlated with elevated PLM index and stroke volume. Partial Spearman's rank-order correlations demonstrated that the relationship between WMH burden and PLM index persisted despite controlling for vascular risk factors. Multivariate linear regression models revealed that PLM index was a significant predictor of an elevated ARWMC score while controlling for age, stroke volume, stroke severity, hypertension, and apnea-hypopnea index. The quantity of PLMs was associated with WMH burden in patients with first-ever minor stroke or TIA. PLMs may be a risk factor for or marker of WMH burden, even after considering vascular risk factors and stroke severity. These results invite further investigation of PLMs as a potentially useful target to reduce WMH and stroke burden.

  9. Tackling heterogeneity: a leaf disc-based assay for the high-throughput screening of transient gene expression in tobacco.

    Directory of Open Access Journals (Sweden)

    Natalia Piotrzkowski

    Full Text Available Transient Agrobacterium-mediated gene expression assays for Nicotiana tabacum (N. tabacum are frequently used because they facilitate the comparison of multiple expression constructs regarding their capacity for maximum recombinant protein production. However, for three model proteins, we found that recombinant protein accumulation (rpa was significantly influenced by leaf age and leaf position effects. The ratio between the highest and lowest amount of protein accumulation (max/min ratio was found to be as high as 11. Therefore, construct-based impacts on the rpa level that are less than 11-fold will be masked by background noise. To address this problem, we developed a leaf disc-based screening assay and infiltration device that allows the rpa level in a whole tobacco plant to be reliably and reproducibly determined. The prototype of the leaf disc infiltration device allows 14 Agrobacterium-mediated infiltration events to be conducted in parallel. As shown for three model proteins, the average max/min rpa ratio was reduced to 1.4 using this method, which allows for a sensitive comparison of different genetic elements affecting recombinant protein expression.

  10. Transient Ablation of Teflon Hemispheres

    Science.gov (United States)

    Arai, Norio; Karashima, Kei-ichi; Sato, Kiyoshi

    1997-01-01

    For high-speed entry of space vehicles into atmospheric environments, ablation is a practical method for alleviating severe aerodynamic heating. Several studies have been undertaken on steady or quasi-steady ablation. However, ablation is a very complicated phenomenon in which a nonequilibrium chemical process is associated with an aerodynamic process that involves changes in body shape with time. Therefore, it seems realistic to consider that ablation is an unsteady phenomenon. In the design of an ablative heat-shield system, since the ultimate purpose of the heat shield is to keep the internal temperature of the space vehicle at a safe level during entry, the transient heat conduction characteristics of the ablator may be critical in the selection of the material and its thickness. This note presents an experimental study of transient ablation of Teflon, with particular emphasis on the change in body shape, the instantaneous internal temperature distribution, and the effect of thermal expansion on ablation rate.

  11. Statistical searches for microlensing events in large, non-uniformly sampled time-domain surveys: A test using palomar transient factory data

    Energy Technology Data Exchange (ETDEWEB)

    Price-Whelan, Adrian M.; Agüeros, Marcel A. [Department of Astronomy, Columbia University, 550 W 120th Street, New York, NY 10027 (United States); Fournier, Amanda P. [Department of Physics, Broida Hall, University of California, Santa Barbara, CA 93106 (United States); Street, Rachel [Las Cumbres Observatory Global Telescope Network, Inc., 6740 Cortona Drive, Suite 102, Santa Barbara, CA 93117 (United States); Ofek, Eran O. [Benoziyo Center for Astrophysics, Weizmann Institute of Science, 76100 Rehovot (Israel); Covey, Kevin R. [Lowell Observatory, 1400 West Mars Hill Road, Flagstaff, AZ 86001 (United States); Levitan, David; Sesar, Branimir [Division of Physics, Mathematics, and Astronomy, California Institute of Technology, Pasadena, CA 91125 (United States); Laher, Russ R.; Surace, Jason, E-mail: adrn@astro.columbia.edu [Spitzer Science Center, California Institute of Technology, Mail Stop 314-6, Pasadena, CA 91125 (United States)

    2014-01-20

    Many photometric time-domain surveys are driven by specific goals, such as searches for supernovae or transiting exoplanets, which set the cadence with which fields are re-imaged. In the case of the Palomar Transient Factory (PTF), several sub-surveys are conducted in parallel, leading to non-uniform sampling over its ∼20,000 deg{sup 2} footprint. While the median 7.26 deg{sup 2} PTF field has been imaged ∼40 times in the R band, ∼2300 deg{sup 2} have been observed >100 times. We use PTF data to study the trade off between searching for microlensing events in a survey whose footprint is much larger than that of typical microlensing searches, but with far-from-optimal time sampling. To examine the probability that microlensing events can be recovered in these data, we test statistics used on uniformly sampled data to identify variables and transients. We find that the von Neumann ratio performs best for identifying simulated microlensing events in our data. We develop a selection method using this statistic and apply it to data from fields with >10 R-band observations, 1.1 × 10{sup 9} light curves, uncovering three candidate microlensing events. We lack simultaneous, multi-color photometry to confirm these as microlensing events. However, their number is consistent with predictions for the event rate in the PTF footprint over the survey's three years of operations, as estimated from near-field microlensing models. This work can help constrain all-sky event rate predictions and tests microlensing signal recovery in large data sets, which will be useful to future time-domain surveys, such as that planned with the Large Synoptic Survey Telescope.

  12. Time optimal paths for high speed maneuvering

    Energy Technology Data Exchange (ETDEWEB)

    Reister, D.B.; Lenhart, S.M.

    1993-01-01

    Recent theoretical results have completely solved the problem of determining the minimum length path for a vehicle with a minimum turning radius moving from an initial configuration to a final configuration. Time optimal paths for a constant speed vehicle are a subset of the minimum length paths. This paper uses the Pontryagin maximum principle to find time optimal paths for a constant speed vehicle. The time optimal paths consist of sequences of axes of circles and straight lines. The maximum principle introduces concepts (dual variables, bang-bang solutions, singular solutions, and transversality conditions) that provide important insight into the nature of the time optimal paths. We explore the properties of the optimal paths and present some experimental results for a mobile robot following an optimal path.

  13. Prospects for High-Precision Pulsar Timing

    CERN Document Server

    Liu, K; Kramer, M; Stappers, B W; van Straten, W; Cordes, J M

    2011-01-01

    Timing pulses of pulsars has proved to be a most powerful technique useful to a host of research areas in astronomy and physics. Importantly, the precision of this timing is not only affected by radiometer noise, but also by intrinsic pulse shape changes, interstellar medium (ISM) evolution, instrumental distortions, etc. In this paper we review the known causes of pulse shape variations and assess their effect on the precision and accuracy of a single measurement of pulse arrival time with current instrumentation. Throughout this analysis we use the brightest and most precisely timed millisecond pulsar (MSP), PSR J0437-4715, as a case study, and develop a set of diagnostic tools to evaluate profile stability in timing observations. We conclude that most causes of distortion can be either corrected by state-of-the-art techniques or taken into account in the estimation of time-of-arrival (TOA) uncertainties. The advent of a new generation of radio telescopes (e.g. the Square Kilometre Array, SKA), and their in...

  14. An in vitro-identified high-affinity nucleosome-positioning signal is capable of transiently positioning a nucleosome in vivo

    Directory of Open Access Journals (Sweden)

    Gracey Lia E

    2010-07-01

    Full Text Available Abstract Background The physiological function of eukaryotic DNA occurs in the context of nucleosomal arrays that can expose or obscure defined segments of the genome. Certain DNA sequences are capable of strongly positioning a nucleosome in vitro, suggesting the possibility that favorable intrinsic signals might reproducibly structure chromatin segments. As high-throughput sequencing analyses of nucleosome coverage in vitro and in vivo have become possible, a vigorous debate has arisen over the degree to which intrinsic DNA:nucleosome affinities orchestrate the in vivo positions of nucleosomes, thereby controlling physical accessibility of specific sequences in DNA. Results We describe here the in vivo consequences of placing a synthetic high-affinity nucleosome-positioning signal, the 601 sequence, into a DNA plasmid vector in mice. Strikingly, the 601 sequence was sufficient to position nucleosomes during an early phase after introduction of the DNA into the mice (when the plasmid vector transgene was active. This positioning capability was transient, with a loss of strong positioning at a later time point when the transgenes had become silent. Conclusions These results demonstrate an ability of DNA sequences selected solely for nucleosome affinity to organize chromatin in vivo, and the ability of other mechanisms to overcome these interactions in a dynamic nuclear environment.

  15. The Intermediate Luminosity Optical Transient SN 2010da: The Progenitor, Eruption, and Aftermath of a Peculiar Supergiant High-mass X-Ray Binary

    Science.gov (United States)

    Villar, V. A.; Berger, E.; Chornock, R.; Margutti, R.; Laskar, T.; Brown, P. J.; Blanchard, P. K.; Czekala, I.; Lunnan, R.; Reynolds, M. T.

    2016-10-01

    We present optical spectroscopy, ultraviolet-to-infrared imaging, and X-ray observations of the intermediate luminosity optical transient (ILOT) SN 2010da in NGC 300 (d = 1.86 Mpc) spanning from ‑6 to +6 years relative to the time of outburst in 2010. Based on the light-curve and multi-epoch spectral energy distributions of SN 2010da, we conclude that the progenitor of SN 2010da is a ≈10–12 M ⊙ yellow supergiant possibly transitioning into a blue-loop phase. During outburst, SN 2010da had a peak absolute magnitude of M bol ≲ ‑10.4 mag, dimmer than other ILOTs and supernova impostors. We detect multi-component hydrogen Balmer, Paschen, and Ca ii emission lines in our high-resolution spectra, which indicate a dusty and complex circumstellar environment. Since the 2010 eruption, the star has brightened by a factor of ≈5 and remains highly variable in the optical. Furthermore, we detect SN 2010da in archival Swift and Chandra observations as an ultraluminous X-ray source (L X ≈ 6 × 1039 erg s‑1). We additionally attribute He ii 4686 Å and coronal Fe emission lines in addition to a steady X-ray luminosity of ≈1037 erg s‑1 to the presence of a compact companion.

  16. The Intermediate Luminosity Optical Transient SN 2010da: The Progenitor, Eruption and Aftermath of a Peculiar Supergiant High-mass X-ray Binary

    CERN Document Server

    Villar, V Ashley; Chornock, Ryan; Margutti, Raffaella; Laskar, Tanmoy; Brown, Peter J; Blanchard, Peter K; Czekala, Ian; Lunnan, Ragnhild; Reynolds, Mark T

    2016-01-01

    We present optical spectroscopy, ultraviolet to infrared imaging and X-ray observations of the intermediate luminosity optical transient (ILOT) SN 2010da in NGC 300 (d=1.86 Mpc) spanning from -6 to +6 years relative to the time of outburst in 2010. Based on the light curve and multi-epoch SEDs of SN 2010da, we conclude that the progenitor of SN 2010da is a ~10-12 Msol yellow supergiant possibly transitioning into a blue loop phase. During outburst, SN 2010da had a peak absolute magnitude of M<-10.4 mag, dimmer than other ILOTs and supernova impostors. We detect multi-component hydrogen Balmer, Paschen, and Ca II emission lines in our high-resolution spectra, which indicate a dusty and complex circumstellar environment. Since the 2010 eruption, the star has brightened by a factor of ~5 and remains highly variable in the optical. Furthermore, we detect SN 2010da in archival Swift and Chandra observations as an ultraluminous X-ray source (L~6x10^{39} erg/s). We additionally attribute He II 4686 Angstrom and c...

  17. DSCOVR High Time Resolution Solar Wind Measurements

    Science.gov (United States)

    Szabo, Adam

    2012-01-01

    The Deep Space Climate Observatory (DSCOVR), previously known as Triana, spacecraft is expected to be launched in late 2014. It will carry a fluxgate magnetometer, Faraday Cup solar wind detector and a top-hat electron electrostatic analyzer. The Faraday Cup will provide an unprecedented 10 vectors/sec time resolution measurement of the solar wind proton and alpha reduced distribution functions. Coupled with the 40 vector/sec vector magnetometer measurements, the identification of specific wave modes in the solar wind will be possible for the first time. The science objectives and data products of the mission will be discussed.

  18. Highly segmented, high resolution time-of-flight system

    Energy Technology Data Exchange (ETDEWEB)

    Nayak, T.K.; Nagamiya, S.; Vossnack, O.; Wu, Y.D.; Zajc, W.A. [Columbia Univ., New York, NY (United States); Miake, Y.; Ueno, S.; Kitayama, H.; Nagasaka, Y.; Tomizawa, K.; Arai, I.; Yagi, K [Univ. of Tsukuba, (Japan)

    1991-12-31

    The light attenuation and timing characteristics of time-of-flight counters constructed of 3m long scintillating fiber bundles of different shapes and sizes are presented. Fiber bundles made of 5mm diameter fibers showed good timing characteristics and less light attenuation. The results for a 1.5m long scintillator rod are also presented.

  19. Highly segmented, high resolution time-of-flight system

    Energy Technology Data Exchange (ETDEWEB)

    Nayak, T.K.; Nagamiya, S.; Vossnack, O.; Wu, Y.D.; Zajc, W.A. [Columbia Univ., New York, NY (United States); Miake, Y.; Ueno, S.; Kitayama, H.; Nagasaka, Y.; Tomizawa, K.; Arai, I.; Yagi, K [Univ. of Tsukuba, (Japan)

    1991-12-31

    The light attenuation and timing characteristics of time-of-flight counters constructed of 3m long scintillating fiber bundles of different shapes and sizes are presented. Fiber bundles made of 5mm diameter fibers showed good timing characteristics and less light attenuation. The results for a 1.5m long scintillator rod are also presented.

  20. Rapid formation of Ni3Sn4 joints for die attachment of SiC-based high temperature power devices using ultrasound-induced transient liquid phase bonding process.

    Science.gov (United States)

    Li, Z L; Dong, H J; Song, X G; Zhao, H Y; Feng, J C; Liu, J H; Tian, H; Wang, S J

    2017-05-01

    High melting point Ni3Sn4 joints for the die attachment of SiC-based high temperature power devices was successfully achieved using an ultrasound-induced transient liquid phase (TLP) bonding process within a remarkably short bonding time of 8s. The formed intermetallic joints, which are completely composed of the refined equiaxial Ni3Sn4 grains with the average diameter of 2μm, perform the average shear strength of 26.7MPa. The sonochemical effects of ultrasonic waves dominate the mechanism and kinetics of the rapid formation of Ni3Sn4 joints.

  1. The Northern High Time Resolution Universe Pulsar Survey I: Setup and initial discoveries

    CERN Document Server

    Barr, Ewan D; Kramer, Michael; Eatough, Ralph P; Freire, Paulo C C; Karuppusamy, Ramesh; Lee, K J; Verbiest, Joris P W; Bassa, Cees G; Lyne, Andrew G; Stappers, Benjamin; Lorimer, Duncan R; Klein, Bernd

    2013-01-01

    We report on the setup and initial discoveries of the Northern High Time Resolution Universe survey for pulsars and fast transients, the first major pulsar survey conducted with the 100-m Effelsberg radio telescope and the first in 20 years to observe the whole northern sky at high radio frequencies. Using a newly developed 7-beam receiver system combined with a state-of-the-art polyphase filterbank, we record an effective bandwidth of 240 MHz in 410 channels centred on 1.36 GHz with a time resolution of 54 $\\mu$s. Such fine time and frequency resolution increases our sensitivity to millisecond pulsars and fast transients, especially deep inside the Galaxy, where previous surveys have been limited due to intra-channel dispersive smearing. To optimise observing time, the survey is split into three integration regimes dependent on Galactic latitude, with 1500-s, 180-s and 90-s integrations for latitude ranges $|b|15^{\\circ}$, respectively. The survey has so far resulted in the discovery of 15 radio pulsars, inc...

  2. Bases for time-resolved probing of transient carrier dynamics by optical pump-probe scanning tunneling microscopy.

    Science.gov (United States)

    Yokota, Munenori; Yoshida, Shoji; Mera, Yutaka; Takeuchi, Osamu; Oigawa, Haruhiro; Shigekawa, Hidemi

    2013-10-07

    The tangled mechanism that produces optical pump-probe scanning tunneling microscopy spectra from semiconductors was analyzed by comparing model simulation data with experimental data. The nonlinearities reflected in the spectra, namely, the excitations generated by paired laser pulses with a delay time, the logarithmic relationship between carrier density and surface photovoltage (SPV), and the effect of the change in tunneling barrier height depending on SPV, were examined along with the delay-time-dependent integration process used in measurement. The optimum conditions required to realize reliable measurement, as well as the validity of the microscopy technique, were demonstrated for the first time.

  3. Transient receptor potential is essential for high temperature tolerance in invasive Bemisia tabaci Middle East Asia minor 1 cryptic species.

    Directory of Open Access Journals (Sweden)

    Zhi-Chuang Lü

    Full Text Available Temperature is an important factor in affecting population dynamics and diffusion distribution of organisms. Alien species can successfully invade and colonize to various temperature environments, and one of important reasons is that alien species have a strong resistance to stress temperature. Recently, researchers have focused on the mechanisms of temperature sensing to determine the sensing and regulation mechanisms of temperature adaptation. The transient receptor potential (TRP is one of the key components of an organism's temperature perception system. TRP plays important roles in perceiving temperature, such as avoiding high temperature, low temperature and choosing the optimum temperature. To assess high temperature sensation and the heat resistance role of the TRP gene, we used 3' and 5' rapid-amplification of cDNA ends to isolate the full-length cDNA sequence of the TRP gene from Bemisia tabaci (Gennadius MEAM1 (Middle East Asia Minor 1, examined the mRNA expression profile under various temperature conditions, and identified the heat tolerance function. This is the first study to characterize the TRP gene of invasive B. tabaci MEAM1 (MEAM1 BtTRP. The full-length cDNA of MEAM1 BtTRP was 3871 bp, and the open reading frames of BtTRP was 3501 bp, encoding 1166 amino acids. Additionally, the BtTRP mRNA expression level was significantly increased at 35°C. Furthermore, compared with control treatments, the survival rate of B. tabaci MEAM1 adults was significantly decreased under high temperature stress conditions after feeding with dsRNA BtTRP. Collectively, these results showed that MEAM1 BtTRP is a key element in sensing high temperature and plays an essential role in B. tabaci MEAM1 heat tolerance ability. Our data improved our understanding of the mechanism of temperature sensation in B. tabaci MEAM1 at the molecular level and could contribute to the understanding of the thermal biology of B. tabaci MEAM1 within the context of global

  4. Comparison of transient arterial occlusion and muscle exercise provocation for assessment of perfusion reserve in skeletal muscle with real-time contrast-enhanced ultrasound

    Energy Technology Data Exchange (ETDEWEB)

    Krix, Martin, E-mail: martin.krix@kabelbw.de [German Cancer Research Center, Research Program Imaging and Radiooncology, Department of Radiology, INF 280, D-69120 Heidelberg (Germany); Bracco Imaging Germany, Max-Stromeyer-Str. 116, D-78467 Konstanz (Germany); Krakowski-Roosen, Holger [German Cancer Research Center, Department of Translational Oncology, INF 280, D-69120 Heidelberg (Germany); Armarteifio, Erick [University Hospital of Heidelberg, Department of Diagnostic and Interventional Radiology, INF 110, D-69120 Heidelberg (Germany); Fuerstenberger, Susanne [University Hospital of Heidelberg, Department of Vascular Surgery, INF 110, D-69120 Heidelberg (Germany); Delorme, Stefan [German Cancer Research Center, Research Program Imaging and Radiooncology, Department of Radiology, INF 280, D-69120 Heidelberg (Germany); Kauczor, Hans-Ulrich; Weber, Marc-Andre [University Hospital of Heidelberg, Department of Diagnostic and Interventional Radiology, INF 110, D-69120 Heidelberg (Germany)

    2011-06-15

    Objective: Contrast-enhanced ultrasound (CEUS) is able to quantify muscle perfusion and changes in perfusion due to muscle exercise in real-time. However, reliable measurement of standardized muscle exercise is difficult to perform in clinical examinations. We compared perfusion reserve assessed by CEUS after transient arterial occlusion and exercise to find the most suitable measurement for clinical application. Methods: Contrast pulse sequencing (7 MHz) during continuous IV infusion of SonoVue (4.8 mL/300 s) was used in 8 healthy volunteers to monitor muscle perfusion of the gastrocnemius muscle during transient (1 min) arterial occlusion produced by a thigh cuff of a venous occlusion plethysmograph. Isometric muscle exercise (50% of individual maximum strength for 20 s) was subsequently performed during the same examination, and several CEUS parameters obtained from ultrasound-signal-intensity-time curves and its calculation errors were compared. Results: The mean maximum local blood volume after occlusion was 13.9 [{approx}mL] (range, 4.5-28.8 [{approx}mL]), and similar values were measured after sub-maximum exercise 13.8 [{approx}mL], (range, 4.6-22.2 [{approx}mL]. The areas under the curve during reperfusion vs. recovery were also similar (515.2 {+-} 257.5 compared to 482.2 {+-} 187.5 [{approx}mL s]) with a strong correlation (r = 0.65), as were the times to maximum (15.3 s vs. 15.9 s), with a significantly smaller variation for the occlusion method ({+-}2.1 s vs. {+-}9.0 s, p = 0.03). The mean errors for all calculated CEUS parameters were lower for the occlusion method than for the exercise test. Conclusions: CEUS muscle perfusion measurements can be easily performed after transient arterial occlusion. It delivers data which are comparable to CEUS measurements after muscle exercise but with a higher robustness. This method can be easily applied in clinical examination of patients with e.g. PAOD or diabetic microvessel diseases to assess perfusion reserve.

  5. Enzyme transient state kinetics in crystal and solution from the perspective of a time-resolved crystallographer.

    Science.gov (United States)

    Schmidt, Marius; Saldin, Dilano K

    2014-03-01

    With recent technological advances at synchrotrons [Graber et al., J. Synchrotron Radiat. 18, 658-670 (2011)], it is feasible to rapidly collect time-resolved crystallographic data at multiple temperature settings [Schmidt et al., Acta Crystallogr. D 69, 2534-2542 (2013)], from which barriers of activation can be extracted. With the advent of fourth generation X-ray sources, new opportunities emerge to investigate structure and dynamics of biological macromolecules in real time [M. Schmidt, Adv. Condens. Matter Phys. 2013, 1-10] in crystals and potentially from single molecules in random orientation in solution [Poon et al., Adv. Condens. Matter Phys. 2013, 750371]. Kinetic data from time-resolved experiments on short time-scales must be interpreted in terms of chemical kinetics [Steinfeld et al., Chemical Kinetics and Dynamics, 2nd ed. (Prentience Hall, 1985)] and tied to existing time-resolved experiments on longer time-scales [Schmidt et al., Acta Crystallogr. D 69, 2534-2542 (2013); Jung et al., Nat. Chem. 5, 212-220 (2013)]. With this article, we will review and outline steps that are required to routinely determine the energetics of reactions in biomolecules in crystal and solution with newest X-ray sources. In eight sections, we aim to describe concepts and experimental details that may help to inspire new approaches to collect and interpret these data.

  6. Embedded Fiber Optic Sensors for Measuring Transient Detonation/Shock Behavior;Time-of-Arrival Detection and Waveform Determination.

    Energy Technology Data Exchange (ETDEWEB)

    Chavez, Marcus Alexander; Willis, Michael David; Covert, Timothy Todd

    2014-09-01

    The miniaturization of explosive components has driven the need for a corresponding miniaturization of the current diagnostic techniques available to measure the explosive phenomena. Laser interferometry and the use of spectrally coated optical windows have proven to be an essential interrogation technique to acquire particle velocity time history data in one- dimensional gas gun and relatively large-scale explosive experiments. A new diagnostic technique described herein allows for experimental measurement of apparent particle velocity time histories in microscale explosive configurations and can be applied to shocks/non-shocks in inert materials. The diagnostic, Embedded Fiber Optic Sensors (EFOS), has been tested in challenging microscopic experimental configurations that give confidence in the technique's ability to measure the apparent particle velocity time histories of an explosive with pressure outputs in the tenths of kilobars to several kilobars. Embedded Fiber Optic Sensors also allow for several measurements to be acquired in a single experiment because they are microscopic, thus reducing the number of experiments necessary. The future of EFOS technology will focus on further miniaturization, material selection appropriate for the operating pressure regime, and extensive hydrocode and optical analysis to transform apparent particle velocity time histories into true particle velocity time histories as well as the more meaningful pressure time histories.

  7. Enzyme transient state kinetics in crystal and solution from the perspective of a time-resolved crystallographer

    Directory of Open Access Journals (Sweden)

    Marius Schmidt

    2014-03-01

    Full Text Available With recent technological advances at synchrotrons [Graber et al., J. Synchrotron Radiat. 18, 658–670 (2011], it is feasible to rapidly collect time-resolved crystallographic data at multiple temperature settings [Schmidt et al., Acta Crystallogr. D 69, 2534–2542 (2013], from which barriers of activation can be extracted. With the advent of fourth generation X-ray sources, new opportunities emerge to investigate structure and dynamics of biological macromolecules in real time [M. Schmidt, Adv. Condens. Matter Phys. 2013, 1–10] in crystals and potentially from single molecules in random orientation in solution [Poon et al., Adv. Condens. Matter Phys. 2013, 750371]. Kinetic data from time-resolved experiments on short time-scales must be interpreted in terms of chemical kinetics [Steinfeld et al., Chemical Kinetics and Dynamics, 2nd ed. (Prentience Hall, 1985] and tied to existing time-resolved experiments on longer time-scales [Schmidt et al., Acta Crystallogr. D 69, 2534–2542 (2013; Jung et al., Nat. Chem. 5, 212–220 (2013]. With this article, we will review and outline steps that are required to routinely determine the energetics of reactions in biomolecules in crystal and solution with newest X-ray sources. In eight sections, we aim to describe concepts and experimental details that may help to inspire new approaches to collect and interpret these data.

  8. Early-time observations of gamma-ray burst error boxes with the Livermore optical transient imaging system

    Energy Technology Data Exchange (ETDEWEB)

    Williams, G G

    2000-08-01

    Despite the enormous wealth of gamma-ray burst (GRB) data collected over the past several years the physical mechanism which causes these extremely powerful phenomena is still unknown. Simultaneous and early time optical observations of GRBs will likely make an great contribution t o our understanding. LOTIS is a robotic wide field-of-view telescope dedicated to the search for prompt and early-time optical afterglows from gamma-ray bursts. LOTIS began routine operations in October 1996 and since that time has responded to over 145 gamma-ray burst triggers. Although LOTIS has not yet detected prompt optical emission from a GRB its upper limits have provided constraints on the theoretical emission mechanisms. Super-LOTIS, also a robotic wide field-of-view telescope, can detect emission 100 times fainter than LOTIS is capable of detecting. Routine observations from Steward Observatory's Kitt Peak Station will begin in the immediate future. During engineering test runs under bright skies from the grounds of Lawrence Livermore National Laboratory Super-LOTIS provided its first upper limits on the early-time optical afterglow of GRBs. This dissertation provides a summary of the results from LOTIS and Super-LOTIS through the time of writing. Plans for future studies with both systems are also presented.

  9. Transient exposure of pulmonary surfactant to hyaluronan promotes structural and compositional transformations into a highly active state.

    Science.gov (United States)

    Lopez-Rodriguez, Elena; Cruz, Antonio; Richter, Ralf P; Taeusch, H William; Pérez-Gil, Jesús

    2013-10-11

    Pulmonary surfactant is a lipid-protein complex that lowers surface tension at the respiratory air-liquid interface, stabilizing the lungs against physical forces tending to collapse alveoli. Dysfunction of surfactant is associated with respiratory pathologies such as acute respiratory distress syndrome or meconium aspiration syndrome where naturally occurring surfactant-inhibitory agents such as serum, meconium, or cholesterol reach the lung. We analyzed the effect of hyaluronan (HA) on the structure and surface behavior of pulmonary surfactant to understand the mechanism for HA-promoted surfactant protection in the presence of inhibitory agents. In particular, we found that HA affects structural properties such as the aggregation state of surfactant membranes and the size, distribution, and order/packing of phase-segregated lipid domains. These effects do not require a direct interaction between surfactant complexes and HA and are accompanied by a compositional reorganization of large surfactant complexes that become enriched with saturated phospholipid species. HA-exposed surfactant reaches very high efficiency in terms of rapid and spontaneous adsorption of surfactant phospholipids at the air-liquid interface and shows significantly improved resistance to inactivation by serum or cholesterol. We propose that physical effects pertaining to the formation of a meshwork of interpenetrating HA polymer chains are responsible for the changes in surfactant structure and composition that enhance surfactant function and, thus, resistance to inactivation. The higher resistance of HA-exposed surfactant to inactivation persists even after removal of the polymer, suggesting that transient exposure of surfactant to polymers like HA could be a promising strategy for the production of more efficient therapeutic surfactant preparations.

  10. Transient Heat Conduction

    DEFF Research Database (Denmark)

    Rode, Carsten

    1998-01-01

    Analytical theory of transient heat conduction.Fourier's law. General heat conducation equation. Thermal diffusivity. Biot and Fourier numbers. Lumped analysis and time constant. Semi-infinite body: fixed surface temperature, convective heat transfer at the surface, or constant surface heat flux...

  11. High Resolution Timing of MIPs with RPCs

    CERN Document Server

    Fonte, Paulo J R

    2002-01-01

    Proposal of abstract for RPC99, Bari, Italy, 28-29 October 1999. RPCs made with glass and metal electrodes, forming accurately spaced gaps of a few hundred micrometres, have reached timing accuracies below 70 ps with efficiencies above 95This type of detector, operating at atmospheric pressure with non-flammable gases, seems well suited for large area TOF sytems, providing performances comparable to the existing scintillator-based TOF technology but with significantly lower price per channel.In this work we describe the principles of operation and the performance of several chamber configurations.

  12. A Derivation of Source-based Kinetics Equation with Time Dependent Fission Kernel for Reactor Transient Analyses

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Song Hyun; Woo, Myeong Hyun; Shin, Chang Ho [Hanyang University, Seoul (Korea, Republic of); Pyeon, Cheol Ho [Kyoto University, Osaka (Japan)

    2015-10-15

    In this study, a new balance equation to overcome the problems generated by the previous methods is proposed using source-based balance equation. And then, a simple problem is analyzed with the proposed method. In this study, a source-based balance equation with the time dependent fission kernel was derived to simplify the kinetics equation. To analyze the partial variations of reactor characteristics, two representative methods were introduced in previous studies; (1) quasi-statics method and (2) multipoint technique. The main idea of quasistatics method is to use a low-order approximation for large integration times. To realize the quasi-statics method, first, time dependent flux is separated into the shape and amplitude functions, and shape function is calculated. It is noted that the method has a good accuracy; however, it can be expensive as a calculation cost aspect because the shape function should be fully recalculated to obtain accurate results. To improve the calculation efficiency, multipoint method was proposed. The multipoint method is based on the classic kinetics equation with using Green's function to analyze the flight probability from region r' to r. Those previous methods have been used to analyze the reactor kinetics analysis; however, the previous methods can have some limitations. First, three group variables (r{sub g}, E{sub g}, t{sub g}) should be considered to solve the time dependent balance equation. This leads a big limitation to apply large system problem with good accuracy. Second, the energy group neutrons should be used to analyze reactor kinetics problems. In time dependent problem, neutron energy distribution can be changed at different time. It can affect the change of the group cross section; therefore, it can lead the accuracy problem. Third, the neutrons in a space-time region continually affect the other space-time regions; however, it is not properly considered in the previous method. Using birth history of the

  13. Transient photoconductivity in InGaN/GaN multiple quantum wells, measured by time-resolved terahertz spectroscopy

    DEFF Research Database (Denmark)

    Porte, Henrik; Turchinovich, Dmitry; Cooke, David

    2009-01-01

    Terahertz conductivity of InGaN/GaN MQWs was studied by time-resolved terahertz spectroscopy. Restoration of the built-in piezoelectric field leads to a nonexponential carrier density decay. Terahertz conductivity spectrum is described by the Drude-Smith......Terahertz conductivity of InGaN/GaN MQWs was studied by time-resolved terahertz spectroscopy. Restoration of the built-in piezoelectric field leads to a nonexponential carrier density decay. Terahertz conductivity spectrum is described by the Drude-Smith...

  14. Transient photoconductivity in InGaN/GaN multiple quantum wells, measured by time-resolved terahertz spectroscopy

    OpenAIRE

    Porte, Henrik; Turchinovich, Dmitry; Cooke, David; Jepsen, Peter Uhd

    2009-01-01

    Terahertz conductivity of InGaN/GaN MQWs was studied by time-resolved terahertz spectroscopy. Restoration of the built-in piezoelectric field leads to a nonexponential carrier density decay. Terahertz conductivity spectrum is described by the Drude-Smith

  15. Optical and X-ray Behavior of the High Mass X-ray Transient A0535+26/HDE245770 in 2014

    Science.gov (United States)

    Giovannelli, F.; Bisnovatyi-Kogan, G. S.; Bruni, I.; Corfini, G.; Martinelli, F.; Rossi, C.

    2015-03-01

    The optical behavior of the Be star in the high-mass X-ray transient A0535+26/HDE245770 shows that at periastron the luminosity is typically enhanced by 0.02 mag to a few tenths mag, and the X-ray outburst occurs eight days after the periastron. Indeed, at the periastron an increase of the mass flux occurs. This sort of flush reaches the external part of the temporary accretion disk around the neutron star and moves to the hot central parts of the accretion disk and the neutron star's surface. The time necessary for this process is dependent on the turbulent viscosity in the accretion disk. In this paper we will show the behavior of this system in optical band around the predicted periastron passages in 2014, by using the ephemeris - JDopt-outb = JD0(2 444 944)±n(111.0±0.4) days - that we used to schedule our spectroscopic and photometric optical observations. Spectroscopic unusual activity detected in the Balmer lines and the enhancement in the emission in B, V, and R bands around the 106th periastron passage, and in V-band around the 108th periastron passage after the "zero event" 811205-E at JD 2 444 944, and the subsequent X-ray events definitively demonstrate the existence of a ≍8-day delay between optical and X-ray flares.

  16. Optical and X-ray behaviour of the high mass X-ray transient A0535+26/HDE245770 in February-March 2014

    CERN Document Server

    Giovannelli, F; Bruni, I; Corfini, G; Martinelli, F; Rossi, C

    2014-01-01

    The optical behaviour of the Be star in the high-mass X-ray transient A0535+26/HDE245770 shows that at periastron the luminosity is typically enhanced by 0.02 to a few tenths magnitude, and the X-ray outburst occurs eight days after the periastron. Indeed, at the periastron an increase of the mass flux occurs. This sort of flush reaches the external part of the temporary accretion disk around the neutron star and moves to the hot central parts of the accretion disk and the neutron star surface. The time necessary for this way is dependent on the turbulent viscosity in the accretion disk, as discussed by Giovannelli, Bisnovatyi-Kogan, and Klepnev (2013) (GBK13). In this paper we will show the behaviour of this system in optical band around the predicted periastron passage on 21st February 2014, by using the GBK13 ephemeris that we used to schedule our spectroscopic and photometric optical observations. Spectroscopic unusual activity detected in the Balmer lines and the enhancement in the emission in B, V, and ...

  17. Goddard Space Flight Center contributions to the University of California, Santa Cruz Summer Workshop on High Energy Transients

    Science.gov (United States)

    1983-01-01

    Topics addressing the characteristics and emission mechanisms of gamma ray bursts and neutron and gamma ray emission from solar flares are discussed. In addition, observational aspects of gamma ray astronomy are addressed with particular attention given to optical transients associated with gamma ray bursts.

  18. 瞬态热冲击环境下超硬铝合金7A04的力学性能%MECHANICAL PROPERTIES OF SUPER-HIGH STRENGTH Al ALLOY 7A04 AT TRANSIENT HEATING

    Institute of Scientific and Technical Information of China (English)

    吴大方; 潘兵; 王岳武; 赵寿根; 杨洪源; 黄良

    2011-01-01

    使用瞬态气动热实验模拟系统对超硬铝合金7A04在不同瞬态高温热冲击条件下的力学性能进行了气动热模拟和热载联合实验研究,得到7A04在热、力学环境共同作用下的高温强度极限和承载时间等重要表征参数.实验结果表明:超硬铝合金7A04在短时热冲击环境下的强度极限比航空材料手册中长时间恒温下测量的强度极限有明显提高,这为航空航天材料和结构在短时高速热冲击环境下承载能力的提升和结构优化设计提供了可靠依据.%Super-hard aluminum alloy 7A04 (Al-Zn-Mg-Cu), whose ultimate strength is higher than that of duralumin, belongs to a class of aluminum alloys with highest ultimate strength tested at room temperature. As it can be utilized as structural material of various heating components such as rocket liquid storage tank and missile wing, super-hard aluminum alloy 7A04 has been widely used in the field of aerospace engineering. However, the ultimate strength and other token mechanical parame ters of aluminum alloy 7A04 at transient high-temperature heating environment are still unclear to us, as these key mechanical parameters are lacking in existing strength design handbook. Experimental characterization of these critical parameters of aluminum alloy 7A04 is undoubtedly meaningful to the reliability estimation, life prediction and security design of the high-speed flight vehicle. In this paper, by combining transient aerodynamic heating simulation system and material testing machine, the high-temperature ultimate strength, loading time and other mechanical properties of super-hard aluminum alloy 7A04 under different transient heating temperature and loading conditions were inves tigated Experimental results revealed that the ultimate strength and loading capability of aluminum alloy 7A04 subjected to transient thermal heating were much higher than those tested in a long-time stable high-temperature environment. The

  19. The LOFAR Transients Pipeline

    NARCIS (Netherlands)

    Swinbank, J.; Staley, T.; Molenaar, G.; Rol, E.; Rowlinson, A.; Scheers, L.H.A.; Spreeuw, H.; Bell, M.E.; Broderick, J.; Carbone, D.; Garsden, H.; Horst, A. van der; Law, C.J.; Wise, M.W.; Breton, R.P.; Cendes, Y.; Corbel, S.; Eisloeffel, J.; Falcke, H.; Fender, R.P.; Griessmeier, J.-M.; Hessels, J.W.T.; Stappers, B.W.; Stewart, A.; Wijers, R.A.M.J.; Wijnands, R.; Zarka, P.

    2015-01-01

    Current and future astronomical survey facilities provide a remarkably rich opportunity for transient astronomy, combining unprecedented fields of view with high sensitivity and the ability to access previously unexplored wavelength regimes. This is particularly true of LOFAR, a recently-commissione

  20. Transient Go: A Mobile App for Transient Astronomy Outreach

    Science.gov (United States)

    Crichton, D.; Mahabal, A.; Djorgovski, S. G.; Drake, A.; Early, J.; Ivezic, Z.; Jacoby, S.; Kanbur, S.

    2016-12-01

    Augmented Reality (AR) is set to revolutionize human interaction with the real world as demonstrated by the phenomenal success of `Pokemon Go'. That very technology can be used to rekindle the interest in science at the school level. We are in the process of developing a prototype app based on sky maps that will use AR to introduce different classes of astronomical transients to students as they are discovered i.e. in real-time. This will involve transient streams from surveys such as the Catalina Real-time Transient Survey (CRTS) today and the Large Synoptic Survey Telescope (LSST) in the near future. The transient streams will be combined with archival and latest image cut-outs and other auxiliary data as well as historical and statistical perspectives on each of the transient types being served. Such an app could easily be adapted to work with various NASA missions and NSF projects to enrich the student experience.

  1. New tuning rules of PI-like controllers with transient performances for monotonic time-delay systems.

    Science.gov (United States)

    Mnif, Faïçal

    2008-10-01

    In this note, new tuning methods for Proportional-Integral (PI) are proposed for monotonic time delay systems. Like the Ziegler-Nichols method, the proposed technique requires only parameters obtained from the plant step response. Unlike conventional techniques, the resultant tuning parameters offer the advantage of obtaining stable response with prescribed dynamic behavior with relation to the maximum overshoot. The idea of the design is simple and relies on basics learned in an introductory control course.

  2. Timing and spectral analysis of the unusual X-ray transient XTE J0421+560/CI Camelopardalis

    NARCIS (Netherlands)

    Bartlett, E.S.; Clark, J.S.; Coe, M.J.; Garcia, M.G.; Uttley, P.

    2013-01-01

    We present a detailed X-ray study of the 2003 XMM-Newton observation of the high-mass X-ray binary XTE J0421+560/CI Camelopardalis. The continuum of the X-ray spectrum is well described by a flat power law (Γ = 1.0 ± 0.2) with a large intrinsic absorbing column (NH = (4.4 ± 0.5) × 1023 cm−2). We hav

  3. The influence of exercise duration at VO2 max on the off-transient pulmonary oxygen uptake phase during high intensity running activity.

    Science.gov (United States)

    Billat, V L; Hamard, L; Koralsztein, J P

    2002-12-01

    The purpose of this study was to examine the influence of time run at maximal oxygen uptake (VO2 max) on the off-transient pulmonary oxygen uptake phase after supra-lactate threshold runs. We hypothesised: 1) that among the velocities eliciting VO2 max there is a velocity threshold from which there is a slow component in the VO2-off transient, and 2) that at this velocity the longer the duration of this time at VO2 max (associated with an accumulated oxygen kinetics since VO2 can not overlap VO2 max), the longer is the off-transient phase of oxygen uptake kinetics. Nine long-distance runners performed five maximal tests on a synthetic track (400 m) while breathing through the COSMED K4b2 portable, telemetric metabolic analyser: i) an incremental test which determined VO2 max, the minimal velocity associated with VO2 max (vVO2 max) and the velocity at the lactate threshold (vLT), ii) and in a random order, four supra-lactate threshold runs performed until exhaustion at vLT + 25, 50, 75 and 100% of the difference between vLT and vVO2 max (vdelta25, vdelta50, vdelta75, vdelta100). At vdelta25, vdelta50 (= 91.0 +/- 0.9% vVO2 max) and vdelta75, an asymmetry was found between the VO2 on (double exponential) and off-transient (mono exponential) phases. Only at vdelta75 there was at positive relationship between the time run at VO2 max (%tlimtot) and the VO2 recovery time constant (Z = 1.8, P = 0.05). In conclusion, this study showed that among the velocities eliciting VO2 max, vdelta75 is the velocity at which the longer the duration of the time at VO2 max, the longer is the off-transient phase of oxygen uptake kinetics. It may be possible that at vdelta50 there is not an accumulated oxygen deficit during the plateau of VO2 at VO2 max and that the duration of the time at VO2 max during the exhaustive runs at vdelta100, could be too short to induce an accumulating oxygen deficit affecting the oxygen recovery.

  4. CHO-S Antibody Titers >1 Gram/Liter Using Flow Electroporation-Mediated Transient Gene Expression followed by Rapid Migration to High-Yield Stable Cell Lines

    OpenAIRE

    Steger, Krista; Brady, James; WANG, WEILI; Duskin, Meg; Donato, Karen; Peshwa, Madhusudan

    2015-01-01

    In recent years, researchers have turned to transient gene expression (TGE) as an alternative to CHO stable cell line generation for early-stage antibody development. Despite advances in transfection methods and culture optimization, the majority of CHO-based TGE systems produce insufficient antibody titers for extensive use within biotherapeutic development pipelines. Flow electroporation using the MaxCyte STX Scalable Transfection System is a highly efficient, scalable means of CHO-based TG...

  5. Transient analysis of electromagnetic wave interactions on high-contrast scatterers using volume electric field integral equation

    KAUST Repository

    Sayed, Sadeed Bin

    2014-07-01

    A marching on-in-time (MOT)-based time domain volume electric field integral equation (TD-VEFIE) solver is proposed for accurate and stable analysis of electromagnetic wave interactions on high-contrast scatterers. The stability is achieved using band-limited but two-sided (non-causal) temporal interpolation functions and an extrapolation scheme to cast the time marching into a causal form. The extrapolation scheme is designed to be highly accurate for oscillating and exponentially decaying fields, hence it accurately captures the physical behavior of the resonant modes that are excited inside the dielectric scatterer. Numerical results demonstrate that the resulting MOT scheme maintains its stability as the number of resonant modes increases with the contrast of the scatterer.

  6. Implications of Electron Momentum Relaxation Time Scales for Modeling of Transient Electric Fields in the Lower Ionosphere

    Science.gov (United States)

    Pasko, V. P.

    2009-12-01

    Thomas et al. [JGR, A12306, 2008] has reported lightning-driven electric (E) field pulses at 75-130 km altitude recorded during rocket experiment in 1995 from Wallops Island, Virginia. The measurements were compared to a 2D electromagnetic model of Cho and Rycroft [JASTP, 60,871,1998]. Thomas et al.[2008] indicated that the observed field magnitudes were an order of magnitude lower than predicted by the model and questioned validity of the electromagnetic pulse mechanism of elves. The goal of the present work, which utilizes Monte Carlo and FDTD electromagnetic modeling, is to emphasize range of validity of the local field approximation (LFA) employed in the Cho and Rycroft's [1998] model and other similar models for the cases when weak (~10 mV/m as reported in [Thomas et al., 2008]) E field pulses are considered. Glukhov et al. [GRL, 23, 2193, 1996] and Sukhorukov et al. [GRL, 23, 2911, 1996] performed Monte Carlo simulations for large E fields ~10V/m at typical altitudes of elves, which fully confirmed validity of models of elves based on LFA [Taranenko et al., GRL, 20, 2675, 1993; Inan et al., GRL, 23, 133, 1996]. We demonstrate that the time of relaxation of the momentum of the electron distributions subjected to the external E field scales approximately as 1/E and exceeds 10s of microseconds for E1 V/m when fast (10 kHz) processes are considered. The models of elves relying on LFA [e.g., Taranenko et al., 1993; Inan et al., 1996] generally require E>1 V/m for production of observable optical emissions at lower ionospheric altitudes and therefore remain valid, in agreement with original conclusions reached by Glukhov et al. [1996] and Sukhorukov et al. [1996]. Two additional factors may have contributed to the low field magnitudes reported in [Thomas et al., 2008]: 1) The measurements were conducted on September 2, 1995 around evening hours (9:22 PM local time) at which the lower ionosphere likely exhibited enhancement of electron density in comparison with

  7. Time- and cell-type speciifc changes in iron, ferritin, and transferrin in the gerbil hippocampal CA1 region after transient forebrain ischemia

    Institute of Scientific and Technical Information of China (English)

    Dae Young Yoo; Yeo Sung Yoon; Moo-Ho Won; In Koo Hwang; Ki-Yeon Yoo; Joon Ha Park; Hyun Jung Kwon; Hyo Young Jung; Jong Whi Kim; Goang-Min Choi; Seung Myung Moon; Dae Won Kim

    2016-01-01

    In the present study, we used immunohistochemistry and western blot analysis to examine changes in the levels and cellular localization of iron, heavy chain ferritin (ferritin-H), and transferrin in the gerbil hippocampal CA1 region from 30 minutes to 7 days following transient forebrain ischemia. Relative to sham controls, iron reactivity increased signiifcantly in the stratum pyramidale and stratum oriens at 12 hours following ischemic insult, transiently decreased at 1–2 days and then increased once again within the CA1 region at 4–7 days after ischemia. One day after ischemia, ferritin-H immunoreactivity increased significantly in the stratum pyramidale and decreased at 2 days. At 4–7 days after ischemia, ferritin-H immunoreactivity in the glial components in the CA1 region was signiifcantly increased. Transferrin im-munoreactivity was increased signiifcantly in the stratum pyramidale at 12 hours, peaked at 1 day, and then decreased signiifcantly at 2 days after ischemia. Seven days after ischemia, Transferrin immunoreactivity in the glial cells of the stratum oriens and radiatum was signiifcantly increased. Western blot analyses support-ed these results, demonstrating that compared to sham controls, ferritin H and transferrin protein levels in hippocampal homogenates significantly increased at 1 day after ischemia, peaked at 4 days and then decreased. These results suggest that iron overload-induced oxidative stress is most prominent at 12 hours after ischemia in the stratum pyramidale, suggesting that this time window may be the optimal period for therapeutic intervention to protect neurons from ischemia-induced death.

  8. Functional dissociation of transient and sustained fMRI BOLD components in human auditory cortex revealed with a streaming paradigm based on interaural time differences.

    Science.gov (United States)

    Schadwinkel, Stefan; Gutschalk, Alexander

    2010-12-01

    A number of physiological studies suggest that feature-selective adaptation is relevant to the pre-processing for auditory streaming, the perceptual separation of overlapping sound sources. Most of these studies are focused on spectral differences between streams, which are considered most important for streaming. However, spatial cues also support streaming, alone or in combination with spectral cues, but physiological studies of spatial cues for streaming remain scarce. Here, we investigate whether the tuning of selective adaptation for interaural time differences (ITD) coincides with the range where streaming perception is observed. FMRI activation that has been shown to adapt depending on the repetition rate was studied with a streaming paradigm where two tones were differently lateralized by ITD. Listeners were presented with five different ΔITD conditions (62.5, 125, 187.5, 343.75, or 687.5 μs) out of an active baseline with no ΔITD during fMRI. The results showed reduced adaptation for conditions with ΔITD ≥ 125 μs, reflected by enhanced sustained BOLD activity. The percentage of streaming perception for these stimuli increased from approximately 20% for ΔITD = 62.5 μs to > 60% for ΔITD = 125 μs. No further sustained BOLD enhancement was observed when the ΔITD was increased beyond ΔITD = 125 μs, whereas the streaming probability continued to increase up to 90% for ΔITD = 687.5 μs. Conversely, the transient BOLD response, at the transition from baseline to ΔITD blocks, increased most prominently as ΔITD was increased from 187.5 to 343.75 μs. These results demonstrate a clear dissociation of transient and sustained components of the BOLD activity in auditory cortex.

  9. High-resolution three-dimensional imaging of a depleted CMOS sensor using an edge Transient Current Technique based on the Two Photon Absorption process (TPA-eTCT)

    CERN Document Server

    García, Marcos Fernández; Echeverría, Richard Jaramillo; Moll, Michael; Santos, Raúl Montero; Moya, David; Pinto, Rogelio Palomo; Vila, Iván

    2016-01-01

    For the first time, the deep n-well (DNW) depletion space of a High Voltage CMOS sensor has been characterized using a Transient Current Technique based on the simultaneous absorption of two photons. This novel approach has allowed to resolve the DNW implant boundaries and therefore to accurately determine the real depleted volume and the effective doping concentration of the substrate. The unprecedented spatial resolution of this new method comes from the fact that measurable free carrier generation in two photon mode only occurs in a micrometric scale voxel around the focus of the beam. Real three-dimensional spatial resolution is achieved by scanning the beam focus within the sample.

  10. The Rapid Transient Surveyor

    CERN Document Server

    Baranec, Christoph; Wright, Shelley A; Tonry, John; Tully, R Brent; Szapudi, István; Takamiya, Marianne; Hunter, Lisa; Riddle, Reed; Chen, Shaojie; Chun, Mark

    2016-01-01

    The Rapid Transient Surveyor (RTS) is a proposed rapid-response, high-cadence adaptive optics (AO) facility for the UH 2.2-m telescope on Maunakea. RTS will uniquely address the need for high-acuity and sensitive near-infrared spectral follow-up observations of tens of thousands of objects in mere months by combining an excellent observing site, unmatched robotic observational efficiency, and an AO system that significantly increases both sensitivity and spatial resolving power. We will initially use RTS to obtain the infrared spectra of ~4,000 Type Ia supernovae identified by the Asteroid Terrestrial-Impact Last Alert System over a two year period that will be crucial to precisely measuring distances and mapping the distribution of dark matter in the z < 0.1 universe. RTS will comprise an upgraded version of the Robo-AO laser AO system and will respond quickly to target-of-opportunity events, minimizing the time between discovery and characterization. RTS will acquire simultaneous-multicolor images with a...

  11. Experimental investigation of transient temperature characteristic in high power fiber laser cutting of a thick steel plate

    Science.gov (United States)

    Phi Long, Nguyen; Matsunaga, Yukihiro; Hanari, Toshihide; Yamada, Tomonori; Muramatsu, Toshiharu

    2016-10-01

    Experiment of temperature measurement was performed to investigate the transient temperature characteristics of molten metal during laser cutting. The aim of this study was to establish a method for measuring the surface temperature variation near the molten pool correlated with changes in cutting parameters. The relationship between temperature inside the kerf cut and characteristic of the cut surface was investigated by using thermography and thermocouples. Results show strong correlations between the transient temperatures and the thermal image for different cutting conditions. In addition, two-color thermometer has been used to obtain radiation intensity emitted from the irradiating zone as a function of operating conditions. Experiments have shown that one can detect the cutting quality by characterization of the surface temperature during laser cutting process.

  12. Transient saturation absorption spectroscopy excited near the band gap at high excitation carrier density in GaAs

    Institute of Scientific and Technical Information of China (English)

    Wu Song-Jiang; Wang Dan-Ling; Jiang Hong-Bing; Yang Hong; Gong Qi-Huang; Ji Ya-Lin; Lu Wei

    2004-01-01

    @@ Transient saturation absorption spectroscopy in GaAs thin films was investigated using femtosecond pump and supercontinuum probe technique at excitation densities higher than 1× 1019 cm-3. The Coulomb enhancement factor of the electron-hole plasma results in a spectrum hole at the pump wavelength. Two distinct transmission peaks at two sides of the pump wavelength are observed, arising from the bleaching of transitions from the heavy- and light-hole bands to the conduction band. The dynamic process of the transient saturation absorption is fitted using a bi-exponential function. The fast decay process is dominated by the carrier-phonon scattering and the slow process may be attributed to the electron-hole recombination.

  13. Experimental Report for Thermal Hydraulic Behavior During Startup, Power Change and MCP Transient Operation by using the High Temperature/High Pressure Test Facility(VISTA)

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Ki Yong; Park, Hyun Sik; Cho, Seok; Lee, Sung Jae; Choi, Nam Hyun; Min, Kyong Ho; Song, Chul Hwa; Park, Chun Kyong; Chung, Moon Ki

    2005-07-15

    The VISTA (Experimental Verification by Integral Simulation of Transients and Accidents) is an experimental facility to verify the performance and safety issues of the SMART-P (Pilot plant of the System-integrated Modular Advanced Reactor). The basic design of the SMART-P has been completed by KAERI. The present report describes experimental test results for performance test items, including heatup, power change, MCP transient, and natural circulation operations by using the VISTA facility.

  14. Influence of Damping Coefficient on the Effective Sampling Time of Transient Electromagnetic Method%瞬变电磁法阻尼系数对有效采样时刻影响研究

    Institute of Scientific and Technical Information of China (English)

    马江峰; 付志红; 侯兴哲; 张淮清; 李春燕

    2012-01-01

    瞬变电磁法的探测深度主要由观测时间决定,早期观测信号包含浅层地电信息.接收线圈过渡过程对早期瞬变电磁信号影响严重,导致信号的有效采样时间起始点后延,丢失浅层探测信息.野外工作中,接收线圈两端通常外接阻尼电阻来调整线圈的工作状态.本文基于接收线圈等效电路模型,分析接收线圈阻尼系数对过渡过程的影响,比较了不同工作状态下的瞬变电磁响应特性,计算了不同阻尼系数时的视电阻率误差,并分析了有效采样时刻随阻尼系数的变化趋势.结果表明,浅层探测中过渡过程给早期视电阻率计算带来很大误差,数据处理时须舍弃早期信号或予以校正.在临界阻尼的情况下,过渡过程影响总体最小,为接收线圈最佳工作状态.%Detecting depth of transient electromagnetic method is mainly determined by observation time. The early time observation signal contains information on shallow ground. The transition process of receiver coil which is highly related to distortion of early time transient electromagnetic signals can lead to the time delay of starting point of the effective sampling signal and the loss of the shallow exploration information. During field experiment; the work state of receiver coil is usually adjusted by an external damping resistor. The equivalent circuit model of the receiver coil is established to analyze the influence of damping coefficient on the transition process and to investigate the transient electromagnetic response characteristics under different states. Based on the analysis above; the apparent resistivity error under different damping coefficients is calculated and the relationship between the effective sampling time and the damping coefficient is also given. The result shows that the transition process could cause huge calculation errors on early time apparent resistivity during shallow detection. Thus the early time transient electromagnetic

  15. Explosive and radio-selected Transients: Transient Astronomy with SKA and its Precursors

    CERN Document Server

    Chandra, Poonam; Arun, K G; Iyyani, Shabnam; Misra, Kuntal; Narasimha, D; Ray, Alak; Roy, Subhashis; Sutaria, Firoza

    2016-01-01

    With the high sensitivity and wide-field coverage of the Square Kilometre Array (SKA), large samples of explosive transients are expected to be discovered. Radio wavelengths, especially in commensal survey mode, are particularly well suited for uncovering the complex transient phenomena. This is because observations at radio wavelengths may suffer less obscuration than in other bands (e.g. optical/IR or X-rays) due to dust absorption. At the same time, multiwaveband information often provides critical source classification rapidly than possible with only radio band data. Therefore, multiwaveband observational efforts with wide fields of view will be the key to progress of transients astronomy from the middle 2020s offering unprecedented deep images and high spatial and spectral resolutions. Radio observations of gamma ray bursts (GRBs) with SKA will uncover not only much fainter bursts and verifying claims of sensitivity limited population versus intrinsically dim GRBs, they will also unravel the enigmatic po...

  16. Run-to-run variations, asymmetric pulses, and long time-scale transient phenomena in dielectric-barrier atmospheric pressure glow discharges

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jichul; Raja, Laxminarayan L [Department of Aerospace Engineering and Engineering Mechanics, University of Texas at Austin, Austin, TX 78712 (United States)

    2007-05-21

    The dielectric-barrier (DB) discharge is an important approach to generate uniform non-equilibrium atmospheric-pressure glow discharges. We report run-to-run variations, asymmetric pulse formation and long time-scale transient phenomena in these discharges. For similar DB discharge geometric and operating conditions, we observe significant run-to-run variations as manifested in the different voltage-current waveforms at the start of each new run. These run-to-run variations are also accompanied by asymmetric pulses at the start of each run. The variations are observed to drift to a repeatable true steady-state condition on time scales of order tens of minutes to hours. Asymmetric pulse waveforms drift to a symmetric pulse waveform at the true steady state. We explore reasons for these phenomena and rule out thermal drift during a discharge run and gas-phase impurity buildup as potential causes. The most plausible explanation appears to be variations in the surface characteristics of the DBs between two consecutive runs owing to varying inter-run environmental exposure and the conditioning of the dielectric surface during a run owing to plasma-surface interactions. We speculate that the dielectric surface state affects the secondary electron emission coefficient of the surface which in turn is manifested in the discharge properties. A zero-dimensional model of the discharge is used to explore the effect of secondary electron emission.

  17. Structure formation in perfluoropentacene:diindenoperylene blends and its impact on transient effects in the optical properties studied in real-time during growth

    Energy Technology Data Exchange (ETDEWEB)

    Broch, K.; Gerlach, A., E-mail: alexander.gerlach@uni-tuebingen.de; Lorch, C.; Dieterle, J.; Novák, J.; Schreiber, F. [Universität Tübingen, Institut für Angewandte Physik and LISA, Auf der Morgenstelle 10, 72076 Tübingen (Germany); Hinderhofer, A. [Universität Tübingen, Institut für Angewandte Physik and LISA, Auf der Morgenstelle 10, 72076 Tübingen (Germany); Graduate School of Advanced Integration Science, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba 263-8522 (Japan)

    2013-11-07

    We discuss the result of the competing effects of favourable intermolecular interactions and steric incompatibilities due to the size mismatch of perfluoropentacene (PFP) and diindenoperylene (DIP) on the structure formation and associated optical properties in mixed films. Using real-time grazing incidence X-ray diffraction we investigate the size of coherently scattering islands l{sub s} as a function of film thickness and mixing ratio. We find that for PFP:DIP 1:2 blends l{sub s} is by a factor of ∼4 smaller than in pure DIP films, while l{sub s} of the PFP:DIP 2:1 blends is not significantly reduced compared with pure PFP. Yet, we observe an increase in l{sub s} with film thickness for all of the samples, independent on the mixing ratio. In parallel with the structural characterization we investigate the evolution of the absorption spectra in the visible spectral range and its dependence on l{sub s} in situ during film growth using differential reflectance spectroscopy. We observe a surprisingly strong effect of changes in the structural order on the shape of ε{sub 2,} {sub xy}(E), evident by a pronounced evolution of characteristic peaks in the thickness range from 1.6 nm to 9.6 nm. The combined results of the real-time experiments allow to identify the thickness dependent crystal grain size as the origin of the observed transient effects in the absorption spectra.

  18. Motor current signature analysis for gearbox condition monitoring under transient speeds using wavelet analysis and dual-level time synchronous averaging

    Science.gov (United States)

    Bravo-Imaz, Inaki; Davari Ardakani, Hossein; Liu, Zongchang; García-Arribas, Alfredo; Arnaiz, Aitor; Lee, Jay

    2017-09-01

    This paper focuses on analyzing motor current signature for fault diagnosis of gearboxes operating under transient speed regimes. Two different strategies are evaluated, extensively tested and compared to analyze the motor current signature in order to implement a condition monitoring system for gearboxes in industrial machinery. A specially designed test bench is used, thoroughly monitored to fully characterize the experiments, in which gears in different health status are tested. The measured signals are analyzed using discrete wavelet decomposition, in different decomposition levels using a range of mother wavelets. Moreover, a dual-level time synchronous averaging analysis is performed on the same signal to compare the performance of the two methods. From both analyses, the relevant features of the signals are extracted and cataloged using a self-organizing map, which allows for an easy detection and classification of the diverse health states of the gears. The results demonstrate the effectiveness of both methods for diagnosing gearbox faults. A slightly better performance was observed for dual-level time synchronous averaging method. Based on the obtained results, the proposed methods can used as effective and reliable condition monitoring procedures for gearbox condition monitoring using only motor current signature.

  19. Ultrafast Time-Resolved Emission and Absorption Spectra of meso-Pyridyl Porphyrins upon Soret Band Excitation Studied by Fluorescence Up-Conversion and Transient Absorption Spectroscopy.

    Science.gov (United States)

    Venkatesh, Yeduru; Venkatesan, M; Ramakrishna, B; Bangal, Prakriti Ranjan

    2016-09-08

    A comprehensive study of ultrafast molecular relaxation processes of isomeric meso-(pyridyl) porphyrins (TpyPs) has been carried out by using femtosecond time-resolved emission and absorption spectroscopic techniques upon pumping at 400 nm, Soret band (B band or S2), in 4:1 dichloromethane (DCM) and tetrahydrofuran (THF) solvent mixture. By combined studies of fluorescence up-conversion, time-correlated single photon counting, and transient absorption spectroscopic techniques, a complete model with different microscopic rate constants associated with elementary processes involved in electronic manifolds has been reported. Besides, a distinct coherent nuclear wave packet motion in Qy state is observed at low-frequency mode, ca. 26 cm(-1) region. Fluorescence up-conversion studies constitute ultrafast time-resolved emission spectra (TRES) over the whole emission range (430-710 nm) starting from S2 state to Qx state via Qy state. Careful analysis of time profiles of up-converted signals at different emission wavelengths helps to reveal detail molecular dynamics. The observed lifetimes are as indicated: A very fast decay component with 80 ± 20 fs observed at ∼435 nm is assigned to the lifetime of S2 (B) state, whereas being a rise component in the region of between 550 and 710 nm emission wavelength pertaining to Qy and Qx states, it is attributed to very fast internal conversion (IC) occurring from B → Qy and B → Qx as well. Two distinct components of Qy emission decay with ∼200-300 fs and ∼1-1.5 ps time constants are due to intramolecular vibrational redistribution (IVR) induced by solute-solvent inelastic collisions and vibrational redistribution induced by solute-solvent elastic collision, respectively. The weighted average of these two decay components is assigned as the characteristic lifetime of Qy, and it ranges between 0.3 and 0.5 ps. An additional ∼20 ± 2 ps rise component is observed in Qx emission, and it is assigned to the formation time of

  20. 暂态能量在高压网络中的散播%Spread of transient energy in high voltage network

    Institute of Scientific and Technical Information of China (English)

    孟祥侠; 蔡国伟

    2011-01-01

    By analyzing the change feature of branch phase-angle difference and transient energy distribution in different locations of network in time of one machine-infinite system losing stability, it is pointed out that transient energy is most liable to accumulate in the middle part of lines between groups or within a certain range in the vicinity.For multi-machines system network, based on network parameter, by means of coupling thinking, vulnerability location in network is identified, the relation between network structure vulnerability and transient energy distribution is further revealed.The results show that during system disturbance, more and more transient energy would accumulate in the middle part of vulnerability location in network or vicinity.Simulation and analysis on 6 machines system testify the validation of the proposed method.%通过分析单机无穷大系统失稳时网络中不同部位支路相角差及暂态能量的分布变化特点,指出暂态能量最易在失稳的群间联络线中部或其附近的某一范围内聚积.对多机系统网络,基于网络参数、利用耦合的思想识别网络中的脆弱环节,并进一步揭示网络结构脆弱性与暂态能量分布的关系.研究结果表明:在系统受扰动后的变化过程中,暂态能量越来越多地聚积到网络中脆弱环节的中部或其附近的某一范围内.对6机系统进行仿真分析,验证了所提方法的有效性.

  1. Capture-recapture survival models taking account of transients

    Science.gov (United States)

    Pradel, R.; Hines, J.E.; Lebreton, J.D.; Nichols, J.D.

    1997-01-01

    The presence of transient animals, common enough in natural populations, invalidates the estimation of survival by traditional capture- recapture (CR) models designed for the study of residents only. Also, the study of transit is interesting in itself. We thus develop here a class of CR models to describe the presence of transients. In order to assess the merits of this approach we examme the bias of the traditional survival estimators in the presence of transients in relation to the power of different tests for detecting transients. We also compare the relative efficiency of an ad hoc approach to dealing with transients that leaves out the first observation of each animal. We then study a real example using lazuli bunting (Passerina amoena) and, in conclusion, discuss the design of an experiment aiming at the estimation of transience. In practice, the presence of transients is easily detected whenever the risk of bias is high. The ad hoc approach, which yields unbiased estimates for residents only, is satisfactory in a time-dependent context but poorly efficient when parameters are constant. The example shows that intermediate situations between strict 'residence' and strict 'transience' may exist in certain studies. Yet, most of the time, if the study design takes into account the expected length of stay of a transient, it should be possible to efficiently separate the two categories of animals.

  2. Element-specific characterization of transient electronic structure of solvated Fe(II) complexes with time-resolved soft X-ray absorption spectroscopy.

    Science.gov (United States)

    Hong, Kiryong; Cho, Hana; Schoenlein, Robert W; Kim, Tae Kyu; Huse, Nils

    2015-11-17

    Polypyridyl transition-metal complexes are an intriguing class of compounds due to the relatively facile chemical designs and variations in ligand-field strengths that allow for spin-state changes and hence electronic configurations in response to external perturbations such as pressure and light. Light-activated spin-conversion complexes have possible applications in a variety of molecular-based devices, and ultrafast excited-state evolution in these complexes is of fundamental interest for understanding of the origins of spin-state conversion in metal complexes. Knowledge of the interplay of structure and valence charge distributions is important to understand which degrees of freedom drive spin-conversion and which respond in a favorable (or unfavorable) manner. To track the response of the constituent components, various types of time-resolved X-ray probe methods have been utilized for a broad range of chemical and biological systems relevant to catalysis, solar energy conversions, and functional molecular devices. In particular, transient soft X-ray spectroscopy of solvated molecules can offer complementary information on the detailed electronic structures and valence charge distributions of photoinduced intermediate species: First-row transition-metal L-edges consist of 2p-3d transitions, which directly probe the unoccupied valence density of states and feature lifetime broadening in the range of 100 meV, making them sensitive spectral probes of metal-ligand interactions. In this Account, we present some of our recent progress in employing picosecond and femtosecond soft X-ray pulses from synchrotron sources to investigate element specific valence charge distributions and spin-state evolutions in Fe(II) polypyridyl complexes via core-level transitions. Our results on transient L-edge spectroscopy of Fe(II) complexes clearly show that the reduction in σ-donation is compensated by significant attenuation of π-backbonding upon spin-crossover. This underscores

  3. Transient Ischemic Attack

    Medline Plus

    Full Text Available Transient Ischemic Attack TIA , or transient ischemic attack, is a "mini stroke" that occurs when a blood ... The only difference between a stroke and TIA is that with TIA the blockage is transient (temporary). ...

  4. Anomalous waiting times in high-frequency financial data

    CERN Document Server

    Scalas, E; Luckock, H; Mainardi, F; Mantelli, M; Raberto, M; Scalas, Enrico; Gorenflo, Rudolf; Luckock, Hugh; Mainardi, Francesco; Mantelli, Maurizio; Raberto, Marco

    2004-01-01

    In high-frequency financial data not only returns, but also waiting times between consecutive trades are random variables. Therefore, it is possible to apply continuous-time random walks (CTRWs) as phenomenological models of the high-frequency price dynamics. An empirical analysis performed on the 30 DJIA stocks shows that the waiting-time survival probability for high-frequency data is non-exponential. This fact imposes constraints on agent-based models of financial markets.

  5. High-speed optical signal processing using time lenses

    DEFF Research Database (Denmark)

    Galili, Michael; Hu, Hao; Guan, Pengyu;

    2015-01-01

    This paper will discuss time lenses and their broad range of applications. A number of recent demonstrations of complex high-speed optical signal processing using time lenses will be outlined with focus on the operating principle.......This paper will discuss time lenses and their broad range of applications. A number of recent demonstrations of complex high-speed optical signal processing using time lenses will be outlined with focus on the operating principle....

  6. Voxelwise lp-ntPET for detecting localized, transient dopamine release of unknown timing: sensitivity analysis and application to cigarette smoking in the PET scanner.

    Science.gov (United States)

    Kim, Su Jin; Sullivan, Jenna M; Wang, Shuo; Cosgrove, Kelly P; Morris, Evan D

    2014-09-01

    The "linear parametric neurotransmitter PET" (lp-ntPET) model estimates time variation in endogenous neurotransmitter levels from dynamic PET data. The pattern of dopamine (DA) change over time may be an important element of the brain's response to addictive substances such as cigarettes or alcohol. We have extended the lp-ntPET model from the original region of interest (ROI) - based implementation to be able to apply the model at the voxel level. The resulting endpoint is a dynamic image, or movie, of transient neurotransmitter changes. Simulations were performed to select threshold values to reduce the false positive rate when applied to real (11)C-raclopride PET data. We tested the new voxelwise method on simulated data, and finally, we applied it to (11)C-raclopride PET data of subjects smoking cigarettes in the PET scanner. In simulation, the temporal precision of neurotransmitter response was shown to be similar to that of ROI-based lp-ntPET (standard deviation ∼ 3 min). False positive rates for the voxelwise method were well controlled by combining a statistical threshold (the F-test) with a new spatial (cluster-size) thresholding operation. Sensitivity of detection for the new algorithm was greater than 80% for the case of short-lived DA changes that occur in subregions of the striatum as might be the case with cigarette smoking. Finally, in (11)C-raclopride PET data, DA movies reveal for the first time that different temporal patterns of the DA response to smoking may exist in different subregions of the striatum. These spatiotemporal patterns of neurotransmitter change created by voxelwise lp-ntPET may serve as novel biomarkers for addiction and/or treatment efficacy.

  7. Transient stresses al Parkfield, California, produced by the M 7.4 Landers earthquake of June 28, 1992: implications for the time-dependence of fault friction

    Directory of Open Access Journals (Sweden)

    J. B. Fletcher

    1994-06-01

    Full Text Available he M 7.4 Landers earthquake triggered widespread seismicity in the Western U.S. Because the transient dynamic stresses induced at regional distances by the Landers surface waves are much larger than the expected static stresses, the magnitude and the characteristics of the dynamic stresses may bear upon the earthquake triggering mechanism. The Landers earthquake was recorded on the UPSAR array, a group of 14 triaxial accelerometers located within a 1-square-km region 10 km southwest of the town of Parkfield, California, 412 km northwest of the Landers epicenter. We used a standard geodetic inversion procedure to determine the surface strain and stress tensors as functions of time from the observed dynamic displacements. Peak dynamic strains and stresses at the Earth's surface are about 7 microstrain and 0.035 MPa, respectively, and they have a flat amplitude spectrum between 2 s and 15 s period. These stresses agree well with stresses predicted from a simple rule of thumb based upon the ground velocity spectrum observed at a single station. Peak stresses ranged from about 0.035 MPa at the surface to about 0.12 MPa between 2 and 14 km depth, with the sharp increase of stress away from the surface resulting from the rapid increase of rigidity with depth and from the influence of surface wave mode shapes. Comparison of Landers-induced static and dynamic stresses at the hypocenter of the Big Bear aftershock provides a clear example that faults are stronger on time scales of tens of seconds than on time scales of hours or longer.

  8. Pattern formation, long-term transients, and the Turing-Hopf bifurcation in a space- and time-discrete predator-prey system.

    Science.gov (United States)

    Rodrigues, Luiz Alberto Díaz; Mistro, Diomar Cristina; Petrovskii, Sergei

    2011-08-01

    Understanding of population dynamics in a fragmented habitat is an issue of considerable importance. A natural modelling framework for these systems is spatially discrete. In this paper, we consider a predator-prey system that is discrete both in space and time, and is described by a Coupled Map Lattice (CML). The prey growth is assumed to be affected by a weak Allee effect and the predator dynamics includes intra-specific competition. We first reveal the bifurcation structure of the corresponding non-spatial system. We then obtain the conditions of diffusive instability on the lattice. In order to reveal the properties of the emerging patterns, we perform extensive numerical simulations. We pay a special attention to the system properties in a vicinity of the Turing-Hopf bifurcation, which is widely regarded as a mechanism of pattern formation and spatiotemporal chaos in space-continuous systems. Counter-intuitively, we obtain that the spatial patterns arising in the CML are more typically stationary, even when the local dynamics is oscillatory. We also obtain that, for some parameter values, the system's dynamics is dominated by long-term transients, so that the asymptotical stationary pattern arises as a sudden transition between two different patterns. Finally, we argue that our findings may have important ecological implications.

  9. Numerical solution of one-dimensional transient, two-phase flows with temporal fully implicit high order schemes: Subcooled boiling in pipes

    Energy Technology Data Exchange (ETDEWEB)

    López, R., E-mail: ralope1@ing.uc3m.es; Lecuona, A., E-mail: lecuona@ing.uc3m.es; Nogueira, J., E-mail: goriba@ing.uc3m.es; Vereda, C., E-mail: cvereda@ing.uc3m.es

    2017-03-15

    Highlights: • A two-phase flows numerical algorithm with high order temporal schemes is proposed. • Transient solutions route depends on the temporal high order scheme employed. • ESDIRK scheme for two-phase flows events exhibits high computational performance. • Computational implementation of the ESDIRK scheme can be done in a very easy manner. - Abstract: An extension for 1-D transient two-phase flows of the SIMPLE-ESDIRK method, initially developed for incompressible viscous flows by Ijaz is presented. This extension is motivated by the high temporal order of accuracy demanded to cope with fast phase change events. This methodology is suitable for boiling heat exchangers, solar thermal receivers, etc. The methodology of the solution consist in a finite volume staggered grid discretization of the governing equations in which the transient terms are treated with the explicit first stage singly diagonally implicit Runge-Kutta (ESDIRK) method. It is suitable for stiff differential equations, present in instant boiling or condensation processes. It is combined with the semi-implicit pressure linked equations algorithm (SIMPLE) for the calculation of the pressure field. The case of study consists of the numerical reproduction of the Bartolomei upward boiling pipe flow experiment. The steady-state validation of the numerical algorithm is made against these experimental results and well known numerical results for that experiment. In addition, a detailed study reveals the benefits over the first order Euler Backward method when applying 3rd and 4th order schemes, making emphasis in the behaviour when the system is subjected to periodic square wave wall heat function disturbances, concluding that the use of the ESDIRK method in two-phase calculations presents remarkable accuracy and computational advantages.

  10. Characterization of high fluence neutron induced defect levels in high resistivity silicon detectors using a laser deep level transient spectroscopy (L-DLTS)

    Energy Technology Data Exchange (ETDEWEB)

    Li Chengji (Inst. of Semiconductors, Chinese Academy of Sciences, Beijing, BJ (China)); Li Zheng (Brookhaven National Lab., Upton, NY (United States))

    1994-03-15

    Neutron irradiated high resistivity (4-6 k[Omega]-cm) silicon detectors in the neutron fluence ([Phi][sub n]) range of 5x10[sup 11] n/cm[sup 2] to 1x10[sup 14] n/cm[sup 2] have been studied using a laser deep level transient spectroscopy (L-DLTS). It has been found that the A-center (oxygen-vacancy, E[sub c]=0.17 eV) concentration increases with neutron fluence, reaching a maximum at [Phi][sub n] [approx]5x10[sup 12] n/cm[sup 2] before decreasing with [Phi][sub n]. A broad peak has been found between 200 K and 300 K, which is the result of the overlap of three single levels: the V-V[sup -] (E[sub c]=0.38 eV), the E-center (P-V, E[sub c]=0.44 eV), and a level at E[sub c] = 0.56 eV that is probably V-V[sup 0]. At low neutron fluences ([Phi][sub n]<5x10[sup 12] n/cm[sup 2]), this broad peak is dominated by V-V[sup -] and the E-centers. However, as the fluence increases ([Phi][sub n][>=]5x10[sup 12] n/cm[sup 2]), the peak becomes dominated by the level of E[sub c]=0.56 eV. (orig.)

  11. Transient global amnesia mimics: Transient epileptic amnesia

    Directory of Open Access Journals (Sweden)

    Nicolas Nicastro

    2014-01-01

    Full Text Available We describe the case of a 79-year-old patient referred for suspected transient global amnesia, after an episode of anterograde amnesia which lasted 90 min. An EEG, performed after the episode, showed bilateral temporal electrographic seizures, orienting the diagnosis toward a transient epileptic amnesia. Transient epileptic amnesia is defined by temporal lobe epilepsy characterized by recurrent transient amnestic episodes of 30–90 min in duration, sometimes associated with olfactory hallucinations or oral automatisms. Response to antiepileptic drugs is excellent. We would like to raise awareness toward this epileptic amnesia when facing atypical or recurrent transient amnestic episodes.

  12. Special issue on transient plasmas

    Science.gov (United States)

    Bailey, James; Hoarty, David; Mancini, Roberto; Yoneda, Hitoki

    2015-11-01

    This special issue of Journal of Physics B: Atomic, Molecular and Optical Physics is dedicated to the "spectroscopy of transient plasmas" covering plasma conditions produced by a range of pulsed laboratory sources including short and long pulse lasers, pulsed power devices, and free electron lasers (FELs). The full range of plasma spectroscopy up to high energy bremsstrahlung radiation, including line broadening analysis for application to data recorded with the ChemCam instrument on the Mars Science Laboratory rover Curiosity, is covered. This issue is timely as advances in optical lasers and x-ray FELs (XFEL) are enabling transient plasma to be probed at higher energies and shorter durations than ever before. New XFEL facilities being commissioned in Europe and Asia are adding to those operating in the US and Japan and the ELI high power laser project in Europe, due to open this year, will provide short pulse lasers of unprecedented power. This special issue represents a snapshot of the theoretical and experimental research in dense plasmas, electron kinetics, laser-induced breakdown spectroscopy of low temperature plasmas, inertial confinement fusion and non-equilibrium atomic physics using spectroscopy to diagnose plasmas produced by optical lasers, XFELs and pulsed-power machines.

  13. Rossi X-Ray Timing Explorer and BeppoSAX Observations of the Transient X-Ray Pulsar XTE J1859+083

    Science.gov (United States)

    Corbet, R. H. D.; in't Zand, J. J. M.; Levine, A. M.; Marshall, F. E.

    2009-04-01

    We present observations of the 9.8 s X-ray pulsar XTE J1859+083 made with the All Sky Monitor (ASM) and Proportional Counter Array (PCA) on board the Rossi X-ray Timing Explorer, and the Wide Field Camera (WFC) on board BeppoSAX. The ASM data cover a 12 year time interval and show that an extended outburst occurred between approximately MJD 50,250 and 50,460 (1996 June 16 to 1997 January 12). The ASM data excluding this outburst interval suggest a possible modulation with a period of 60.65 ± 0.08 days. Eighteen sets of PCA observations were obtained over an approximately one month interval in 1999. The flux variability measured with the PCA appears consistent with the possible period found with the ASM. The PCA measurements of the pulse period showed it to decrease nonmonotonically and then to increase significantly. Doppler shifts due to orbital motion rather than accretion torques appear to be better able to explain the pulse period changes. Observations with the WFC during the extended outburst give a position that is consistent with a previously determined PCA error box, but which has a significantly smaller error. The transient nature of XTE J1859+083 and the length of its pulse period are consistent with it being a Be/neutron star binary. The possible 60.65 day orbital period would be of the expected length for a Be star system with a 9.8 s pulse period.

  14. A case of transient hypothermia after trans-lamina terminalis and third ventricle clipping of an extremely high-position basilar tip aneurysm

    Directory of Open Access Journals (Sweden)

    Toshikazu Hidaka

    2015-03-01

    Full Text Available Reports on the trans-lamina terminalis and trans-third ventricular approach are rare. The risk associated with this approach is unknown. After an unsuccessful endovascular surgery, we performed direct surgical clipping via the third ventricle on a 78-year-old woman presenting with an extremely high-positioned, ruptured basilar tip aneurysm. She experienced transient hypothermia for 5 days, and it was considered that this was due to hypothalamic dysfunction. It is necessary to recognize that there is the potential for hypothermia after surgery via the lamina terminalis and third ventricle, even though the mechanisms of hypothalamic thermoregulation are still unclear.

  15. Ionospheric plasma flow over large high-voltage space platforms. I - Ion-plasma-time scale interactions of a plate at zero angle of attack. II - The formation and structure of plasma wake

    Science.gov (United States)

    Wang, J.; Hastings, D. E.

    1992-01-01

    The paper presents the theory and particle simulation results for the ionospheric plasma flow over a large high-voltage space platform at a zero angle of attack and at a large angle of attack. Emphasis is placed on the structures in the large, high-voltage regime and the transient plasma response on the ion-plasma time scale. Special consideration is given to the transient formation of the space-charge wake and its steady-state structure.

  16. Transient osteoporosis: Not just the hip to worry about.

    Science.gov (United States)

    Berman, Nicola; Brent, Howard; Chang, Gregory; Honig, Stephen

    2016-12-01

    Transient osteoporosis (TO) is a clinical syndrome characterized by joint pain and the presence of bone marrow edema on magnetic resonance imaging (MRI), both of which spontaneously resolve over time. Transient osteoporosis most commonly affects the hip, but also may involve other lower extremity sites. TO likely represents a disorder that may be monoarticular or "migratory" with involvement of two or more lower extremity sites sequentially affected over a number of months. We report on two cases of transient osteoporosis, one involving the knee and one involving the hip, demonstrating the utility of serial bone mineral density measurements at both sites. Additionally, we are able to report on the microarchitectural changes seen at the distal femur on ultra-high resolution (7 T) MRI. Case #1 describes a recurrence of transient osteoporosis of the hip three years after a similar presentation at the contralateral hip and highlights the findings of rapidly changing bone mineral density in this clinical syndrome. In contrast to the spine, hip and forearm, peripheral bone density measurements at the knee are rarely reported and to our knowledge Case #2 represents the first report of transient osteoporosis of the knee demonstrating bone density findings similar to that seen in the hip. We postulate that transient osteoporosis of the knee is part of a clinical spectrum most commonly seen in the hip and one that is marked by lower extremity joint pain, bone marrow edema on MRI and transient decreases in bone mineral density all of which spontaneously resolve without sequelae.

  17. Electromagnetic transients in power cables

    CERN Document Server

    da Silva, Filipe Faria

    2013-01-01

    From the more basic concepts to the most advanced ones where long and laborious simulation models are required, Electromagnetic Transients in Power Cables provides a thorough insight into the study of electromagnetic transients and underground power cables. Explanations and demonstrations of different electromagnetic transient phenomena are provided, from simple lumped-parameter circuits to complex cable-based high voltage networks, as well as instructions on how to model the cables.Supported throughout by illustrations, circuit diagrams and simulation results, each chapter contains exercises,

  18. Systematic Observation of Time-Dependent Phenomena in the RF Output Spectrum of High Power Gyrotrons

    Directory of Open Access Journals (Sweden)

    Kern Stefan

    2012-09-01

    Full Text Available At IHM/KIT, high power gyrotrons with conventional cavity (e.g. 1 MW CW at 140 GHz for the stellarator Wendelstein 7-X and coaxial cavity (2 MW shortpulse at 170 GHz for ITER for fusion applications are being developed and verified experimentally. Especially with respect to the problem of parasitic RF oscillations in the beam tunnel of some W7-X tubes, investigations of the gyrotron RF output spectrum have proved to be a valuable source of diagnostic information. Signs of transient effects in millisecond pulses, like frequency switching or intermittent low-frequency modulation, have indicated that truly time-dependent measurements with high frequency resolution and dynamic range could give deeper insight into these phenomena. In this paper, an improved measurement system is presented, which employs a fast oscilloscope as receiver. Shorttime Fourier transform (STFT is applied to the time-domain signal, yielding time-variant spectra with frequency resolutions only limited by acquisition length and STFT segmentation choice. Typical reasonable resolutions are in the range of 100 kHz to 10 MHz with a currently memory-limited maximum acquisition length of 4 ms. A key feature of the system consists in the unambiguity of frequency measurement: The system receives through two parallel channels, each using a harmonic mixer (h = 9 – 12 to convert the signal from RF millimeter wave frequencies (full D-Band, 110 – 170 GHz to IF (0 – 3 GHz. For each IF output signal of each individual mixer, injection side and receiving harmonic are initially not known. Using accordingly determined LO frequencies, this information is retrieved from the redundancy of the channels, yielding unambiguously reconstructed RF spectra with a total span of twice the usable receiver IF bandwidth, up to ≈ 6 GHz in our case. Using the system, which is still being improved continuously, various transient effects like cavity mode switching, parasitic oscillation frequency variation

  19. Characterization of atmospheric nanosecond discharge under highly inhomogeneous and transient electric field in air/water mixture

    Science.gov (United States)

    Ouaras, Karim; Tardiveau, Pierre; Magne, Lionel; Jeanney, Pascal; Bournonville, Blandine

    2016-09-01

    We report the studies of a centimeter range pin-to-plane nanosecond repetitively discharge (high positive voltage pulses (20 to 100 kV). In these typical conditions, plasma exhibit unusual diffuse and large structure. This kind of discharge is not well understood and in first approach, it requires (i) a description of plasma dynamic and (ii) behavior under relevant context (environmental issues ...) using pertinent gas (humid air). Thus, we will first present sub-nanosecond imaging of the discharge obtained for typical conditions of stabilized plasma. Then we will focus on determination of rotational and vibrational temperature (OES) and preliminary results concerning the production and evolution of OH radical in temporal post-discharge in air/water mixture (PLIF). Theses spectroscopic measurements are undertaken as function of most influent parameters, i . e . voltage pulses features (amplitude, rise time and length) and water concentration.

  20. Thermal transient anemometer

    Science.gov (United States)

    Bailey, James L.; Vresk, Josip

    1989-01-01

    A thermal transient anemometer having a thermocouple probe which is utilized to measure the change in temperature over a period of time to provide a measure of fluid flow velocity. The thermocouple probe is located in the fluid flow path and pulsed to heat or cool the probe. The cooling of the heated probe or the heating of the cooled probe from the fluid flow over a period of time is measured to determine the fluid flow velocity. The probe is desired to be locally heated near the tip to increase the efficiency of devices incorporating the probe.

  1. Execution of a High Level Real-Time Language

    OpenAIRE

    Luqi; Berzins, Valdis

    1988-01-01

    Prototype System Description Language (PSDL) is a high level real-time language with special features for hard real-time system specification and design. It can be used to firm up requirements through execution of its software prototypes The language is designed based on a real-time model merging data and control flow and its implementation is beyond conventional compiler technology because of the need to meet real-time constraints. In this paper we describe and illustrate our research result...

  2. Transient high temperature sensor design based on black-body radiation thermal film%基于黑体辐射感温薄膜的瞬态高温传感器的设计

    Institute of Scientific and Technical Information of China (English)

    王俊峰; 李晋英

    2014-01-01

    针对瞬态高温的测量难题,采用辐射式测温技术和接触式测温技术有机结合的方法,设计了由黑体辐射温度敏感体、圆柱状高强度金属外壳以及壳内信号调理电路构成的瞬态高温测量装置。通过对感温薄膜特殊材料的恰当选取以及整体结构的合理设计,并利用ANSYS软件对其黑体感温薄膜进行了瞬态高温热传导分析。分析表明,施加的温度载荷为2000℃、2500℃、3000℃时,此温度传感器响应时间分别为487.001μs、545.001μs、590.001μs ,能够克服传统瞬态温度传感器体积大、响应慢、安装不方便以及易受恶劣环境因素影响等不足,在测温技术领域具有良好的应用价值。%Against the difficult problem of the transient temperature measurement ,by using the radiation thermometry technology and contact thermometry technology combined method ,w e designed a transient high temperature measuring device w hich consisted of the black‐body radi‐ation temperature sensitive body ,the cylindrical metal housing of high strength and the signal conditioning circuit in the housing .Though the proper selection of thermal sensing thin film special material and the rational design of the overall structure ,as well as using ANSYS software ,we analyzed the transient high temperature heat conduction of the black‐body temperature thin film . Analysis shows that when temperature load of 2 000 ℃ ,2 500 ℃ ,3 000 ℃ applied ,the tem‐perature sensor response time was 487 .001 μs ,545 .001 μs ,590 .001 μs ,respectively .This device can overcome the traditional transient temperature sensor shortcoming of bulky ,slow response ,inconvenience to install and susceptibility to harsh environment factors and so on .It has a good application value in the field of thermometry technology .

  3. Robust real-time change detection in high jitter.

    Energy Technology Data Exchange (ETDEWEB)

    Simonson, Katherine Mary; Ma, Tian J.

    2009-08-01

    A new method is introduced for real-time detection of transient change in scenes observed by staring sensors that are subject to platform jitter, pixel defects, variable focus, and other real-world challenges. The approach uses flexible statistical models for the scene background and its variability, which are continually updated to track gradual drift in the sensor's performance and the scene under observation. Two separate models represent temporal and spatial variations in pixel intensity. For the temporal model, each new frame is projected into a low-dimensional subspace designed to capture the behavior of the frame data over a recent observation window. Per-pixel temporal standard deviation estimates are based on projection residuals. The second approach employs a simple representation of jitter to generate pixelwise moment estimates from a single frame. These estimates rely on spatial characteristics of the scene, and are used gauge each pixel's susceptibility to jitter. The temporal model handles pixels that are naturally variable due to sensor noise or moving scene elements, along with jitter displacements comparable to those observed in the recent past. The spatial model captures jitter-induced changes that may not have been seen previously. Change is declared in pixels whose current values are inconsistent with both models.

  4. High-resolution seismic wave propagation using local time stepping

    KAUST Repository

    Peter, Daniel

    2017-03-13

    High-resolution seismic wave simulations often require local refinements in numerical meshes to accurately capture e.g. steep topography or complex fault geometry. Together with explicit time schemes, this dramatically reduces the global time step size for ground-motion simulations due to numerical stability conditions. To alleviate this problem, local time stepping (LTS) algorithms allow an explicit time stepping scheme to adapt the time step to the element size, allowing nearoptimal time steps everywhere in the mesh. This can potentially lead to significantly faster simulation runtimes.

  5. Measurement of real-time tissue elastography in a phantom model and comparison with transient elastography in pediatric patients with liver diseases

    Science.gov (United States)

    Schenk, Jens-Peter; Alzen, Gerhard; Klingmüller, Volker; Teufel, Ulrike; Sakka, Saroa El; Engelmann, Guido; Selmi, Buket

    2014-01-01

    PURPOSE We aimed to determine the comparability of real-time tissue elastography (RTE) and transient elastography (TE) in pediatric patients with liver diseases. MATERIALS AND METHODS RTE was performed on the Elasticity QA Phantom Model 049 (Computerized Imaging Reference Systems Company Inc., Norfolk, Virginia, USA), which has five areas with different levels of stiffness. RTE measurements of relative stiffness (MEAN [mean value of tissue elasticity], AREA [% of blue color-coded stiffer tissue]) in the phantom were compared with the phantom stiffness specified in kPa (measurement unit of TE). RTE and TE were performed on 147 pediatric patients with various liver diseases. A total of 109 measurements were valid. The participants had following diseases: metabolic liver disease (n=25), cystic fibrosis (n=20), hepatopathy of unknown origin (n=11), autoimmune hepatitis (n=12), Wilson’s disease (n=11), and various liver parenchyma alterations (n=30). Correlations between RTE and TE measurements in the patients were calculated. In addition, RTE was performed on a control group (n=30), and the RTE values between the patient and control groups were compared. RESULTS The RTE parameters showed good correlation in the phantom model with phantom stiffness (MEAN/kPa, r=−0.97; AREA/kPa, r=0.98). However, the correlation of RTE and TE was weak in the patient group (MEAN/kPa, r=−0.23; AREA/kPa, r=0.24). A significant difference was observed between the patient and control groups (MEAN, P = 5.32 e-7; AREA, P = 1.62 e-6). CONCLUSION In the phantom model, RTE was correlated with kPa, confirming the presumed comparability of the methods. However, there was no direct correlation between RTE and TE in patients with defined liver diseases under real clinical conditions. PMID:24317333

  6. Super-High Resolution Time Interval Measurement Method Based on Time-Space Relationships

    Institute of Scientific and Technical Information of China (English)

    DU Bao-Qiang; ZHOU Wei

    2009-01-01

    Based on the principle of quantized delay-time, a super-high resolution time interval measurement method is proposed based on time-space relationships.Using the delay-time stability that time and frequency signal travel in a specific medium, the measured time interval can be quantized.Combined with the phase coincidence detection technique, the measurement of time can be changed into the measurement of space length.The resolution and the stability of the measurement system are easily improved.Experimental results show that the measurement resolution of the measured time interval depends on the length difference of the double delay-time unit.When the length difference is set up on millimeter level or sub-millimeter level, super-high measurement resolution from hundreds of picosecond to tens of picosecond can be obtained.

  7. Time correlations of high energy muons in an underground detector

    CERN Document Server

    Becherini, Y; Chiarusi, T; Cozzi, M; Dekhissi, H; Derkaoui, J; Esposito, L S; Giacomelli, G; Giglietto, N; Giorgini, M; Maaroufi, F; Mandrioli, G; Manzoor, S; Margiotta, A; Moussa, A

    2005-01-01

    We present the result of a search for correlations in the arrival times of high energy muons collected from 1995 till 2000 with the streamer tube system of the complete MACRO detector at the underground Gran Sasso Lab. Large samples of single muons (8.6 million), double muons (0.46 million) and multiple muons with multiplicities from 3 to 6 (0.08 million) were selected. These samples were used to search for time correlations of cosmic ray particles coming from the whole upper hemisphere or from selected space cones. The results of our analyses confirm with high statistics a random arrival time distribution of high energy cosmic rays.

  8. Simple nanosecond to minutes transient absorption spectrophotometer.

    Science.gov (United States)

    Mikhonin, Aleksandr V; Maurer, Marta K; Reese, Chad E; Asher, Sanford A

    2005-12-01

    We built a transient absorption spectrophotometer that can determine transient absorption spectral changes that occur at times as fast as approximately 200 ns and as slow as a minute. The transient absorption can be induced by a temperature-jump (T-jump) or by optical pumping from the deep ultraviolet (UV) to the infrared (IR) by use of single ns Nd:YAG laser pulses. Our use of a fiber-optic spectrometer coupled to a XeF flashlamp makes the collection of transient spectra easy and convenient in the spectral range from the near IR (1700 nm) down to the deep UV (200 nm), with high signal-to-noise (S/N) ratios. The spectral resolution is determined by the specific configuration of the fiber-optic spectrometer (grating groove density, fiber diameter, slit width) and varies between 0.3 and 10 nm. The utility of this spectrometer was demonstrated by measuring the rate at which a polymerized crystalline colloidal array (PCCA) of poly(N-isopropylacrylamide) nanogel particles optically switch light due to a T-jump induced by nanosecond 1.9 microm laser pulses. In addition, we measured the rate of optical switching induced by a 3 ns 355 nm pump pulse in PCCA functionalized with azobenzene.

  9. Highly comparative, feature-based time-series classification

    CERN Document Server

    Fulcher, Ben D

    2014-01-01

    A highly comparative, feature-based approach to time series classification is introduced that uses an extensive database of algorithms to extract thousands of interpretable features from time series. These features are derived from across the scientific time-series analysis literature, and include summaries of time series in terms of their correlation structure, distribution, entropy, stationarity, scaling properties, and fits to a range of time-series models. After computing thousands of features for each time series in a training set, those that are most informative of the class structure are selected using greedy forward feature selection with a linear classifier. The resulting feature-based classifiers automatically learn the differences between classes using a reduced number of time-series properties, and circumvent the need to calculate distances between time series. Representing time series in this way results in orders of magnitude of dimensionality reduction, allowing the method to perform well on ve...

  10. Current interruption transients calculation

    CERN Document Server

    Peelo, David F

    2014-01-01

    Provides an original, detailed and practical description of current interruption transients, origins, and the circuits involved, and how they can be calculated Current Interruption Transients Calculationis a comprehensive resource for the understanding, calculation and analysis of the transient recovery voltages (TRVs) and related re-ignition or re-striking transients associated with fault current interruption and the switching of inductive and capacitive load currents in circuits. This book provides an original, detailed and practical description of current interruption transients, origins,

  11. The Zwicky Transient Facility Camera

    Science.gov (United States)

    Dekany, Richard; Smith, Roger M.; Belicki, Justin; Delacroix, Alexandre; Duggan, Gina; Feeney, Michael; Hale, David; Kaye, Stephen; Milburn, Jennifer; Murphy, Patrick; Porter, Michael; Reiley, Daniel J.; Riddle, Reed L.; Rodriguez, Hector; Bellm, Eric C.

    2016-08-01

    The Zwicky Transient Facility Camera (ZTFC) is a key element of the ZTF Observing System, the integrated system of optoelectromechanical instrumentation tasked to acquire the wide-field, high-cadence time-domain astronomical data at the heart of the Zwicky Transient Facility. The ZTFC consists of a compact cryostat with large vacuum window protecting a mosaic of 16 large, wafer-scale science CCDs and 4 smaller guide/focus CCDs, a sophisticated vacuum interface board which carries data as electrical signals out of the cryostat, an electromechanical window frame for securing externally inserted optical filter selections, and associated cryo-thermal/vacuum system support elements. The ZTFC provides an instantaneous 47 deg2 field of view, limited by primary mirror vignetting in its Schmidt telescope prime focus configuration. We report here on the design and performance of the ZTF CCD camera cryostat and report results from extensive Joule-Thompson cryocooler tests that may be of broad interest to the instrumentation community.

  12. Unsteady High Turbulence Effects on Turbine Blade Film Cooling Heat Transfer Performance Using a Transient Liquid Crystal Technique

    Science.gov (United States)

    Han, J. C.; Ekkad, S. V.; Du, H.; Teng, S.

    2000-01-01

    Unsteady wake effect, with and without trailing edge ejection, on detailed heat transfer coefficient and film cooling effectiveness distributions is presented for a downstream film-cooled gas turbine blade. Tests were performed on a five-blade linear cascade at an exit Reynolds number of 5.3 x 10(exp 5). Upstream unsteady wakes were simulated using a spoke-wheel type wake generator. Coolant blowing ratio was varied from 0.4 to 1.2; air and CO2 were used as coolants to simulate different density ratios. Surface heat transfer and film effectiveness distributions were obtained using a transient liquid crystal technique; coolant temperature profiles were determined with a cold wire technique. Results show that Nusselt numbers for a film cooled blade are much higher compared to a blade without film injection. Unsteady wake slightly enhances Nusselt numbers but significantly reduces film effectiveness versus no wake cases. Nusselt numbers increase only slic,htly but film cooling, effectiveness increases significantly with increasing, blowing ratio. Higher density coolant (CO2) provides higher effectiveness at higher blowing ratios (M = 1.2) whereas lower density coolant (Air) provides higher 0 effectiveness at lower blowing ratios (M = 0.8). Trailing edge ejection generally has more effect on film effectiveness than on the heat transfer, typically reducing film effectiveness and enhancing heat transfer. Similar data is also presented for a film cooled cylindrical leading edge model.

  13. Transient or permanent fisheye views

    DEFF Research Database (Denmark)

    Jakobsen, Mikkel Rønne; Hornbæk, Kasper

    2012-01-01

    , about the benefits and limitations of transient visualizations. We describe an experiment that compares the usability of a fisheye view that participants could call up temporarily, a permanent fisheye view, and a linear view: all interfaces gave access to source code in the editor of a widespread......Transient use of information visualization may support specific tasks without permanently changing the user interface. Transient visualizations provide immediate and transient use of information visualization close to and in the context of the user’s focus of attention. Little is known, however...... programming environment. Fourteen participants performed varied tasks involving navigation and understanding of source code. Participants used the three interfaces for between four and six hours in all. Time and accuracy measures were inconclusive, but subjective data showed a preference for the permanent...

  14. The High Time Resolution Universe Pulsar Survey IV: Discovery and polarimetry of millisecond pulsars

    CERN Document Server

    Keith, M J; Bailes, M; Bates, S D; Bhat, N D R; Burgay, M; Burke-Spolaor, S; D'Amico, N; Jameson, A; Kramer, M; Levin, L; Milia, S; Possenti, A; Stappers, B W; van Straten, W; Parent, D

    2011-01-01

    We present the discovery of six millisecond pulsars (MSPs) in the High Time Resolution Universe (HTRU) survey for pulsars and fast transients carried out with the Parkes radio telescope. All six are in binary systems with approximately circular orbits and are likely to have white dwarf companions. PSR J1017-7156 has a high flux density and a narrow pulse width, making it ideal for precision timing experiments. PSRs J1446-4701 and J1125-5825 are coincident with gamma-ray sources, and folding the high-energy photons with the radio timing ephemeris shows evidence of pulsed gamma-ray emission. PSR J1502-6752 has a spin period of 26.7 ms, and its low period derivative implies that it is a recycled pulsar. The orbital parameters indicate it has a very low mass function, and therefore a companion mass much lower than usually expected for such a mildly recycled pulsar. In addition we present polarisation profiles for all 12 MSPs discovered in the HTRU survey to date. Similar to previous observations of MSPs, we find ...

  15. SynUTC - high precision time synchronization over ethernet networks

    CERN Document Server

    Höller, R; Horauer, M; Kerö, N; Schmid, U; Schossmaier, K

    2002-01-01

    This article describes our SynUTC (Synchronized Universal Time Coordinated) technology, which enables high-accuracy distribution of GPS time and time synchronization of network nodes connected via standard Ethernet LANs. By means of exchanging data packets in conjunction with moderate hardware support at nodes and switches, an overall worst-case accuracy in the range of some 100 ns can be achieved, with negligible communication overhead. Our technology thus improves the 1 ms-range accuracy achievable by conventional, software-based approaches like NTP by 4 orders of magnitude. Applications can use the high-accuracy global time provided by SynUTC for event timestamping and event generation both at hardware and software level. SynUTC is based upon inserting highly accurate time information into dedicated data packets at the media-independent interface (MII) between the physical layer transceiver and the network controller upon packet transmission and reception, respectively. As a consequence, every node has acc...

  16. Experimental investigations of transient pressure variations in a high head model Francis turbine during start-up and shutdown

    Institute of Scientific and Technical Information of China (English)

    TRIVEDI Chirag; CERVANTES Michel J.; GANDHI B. K.; OLE DAHLHAUG G

    2014-01-01

    Penetration of the power generated using wind and solar energy to electrical grid network causing several incidents of the grid tripping, power outage, and frequency drooping. This has increased restart (star-stop) cycles of the hydroelectric turbines significantly since grid connected hydroelectric turbines are widely used to manage critical conditions of the grid. Each cycle induces significant stresses due to unsteady pressure loading on the runner blades. The presented work investigates the pressure loading to a high head ( HP=377m, DP=1.78m) Francis turbine during start-stop. The measurements were carried out on a scaled model turbine ( HM =12.5m, DM =0.349m). Total four operating points were considered. At each operating point, three schemes of guide vanes opening and three schemes of guide vanes closing were investigated. The results show that total head variation is up to 9%during start-stop of the turbine. On the runner blade, the maximum pressure amplitudes are about 14 kPa and 16 kPa from the instantaneous mean value of 121 kPa during rapid start-up and shutdown, respectively, which are about 1.5 times larger than that of the slow start-up and shutdown. Moreover, the maximum pressure fluctuations are given at the blade trailing edge.

  17. Wavelets-Computational Aspects of Sterian Realistic Approach to Uncertainty Principle in High Energy Physics: A Transient Approach

    Directory of Open Access Journals (Sweden)

    Cristian Toma

    2013-01-01

    Full Text Available This study presents wavelets-computational aspects of Sterian-realistic approach to uncertainty principle in high energy physics. According to this approach, one cannot make a device for the simultaneous measuring of the canonical conjugate variables in reciprocal Fourier spaces. However, such aspects regarding the use of conjugate Fourier spaces can be also noticed in quantum field theory, where the position representation of a quantum wave is replaced by momentum representation before computing the interaction in a certain point of space, at a certain moment of time. For this reason, certain properties regarding the switch from one representation to another in these conjugate Fourier spaces should be established. It is shown that the best results can be obtained using wavelets aspects and support macroscopic functions for computing (i wave-train nonlinear relativistic transformation, (ii reflection/refraction with a constant shift, (iii diffraction considered as interaction with a null phase shift without annihilation of associated wave, (iv deflection by external electromagnetic fields without phase loss, and (v annihilation of associated wave-train through fast and spatially extended phenomena according to uncertainty principle.

  18. Characterizing Nanoscale Transient Communication.

    Science.gov (United States)

    Chen, Yifan; Anwar, Putri Santi; Huang, Limin; Asvial, Muhamad

    2016-04-01

    We consider the novel paradigm of nanoscale transient communication (NTC), where certain components of the small-scale communication link are physically transient. As such, the transmitter and the receiver may change their properties over a prescribed lifespan due to their time-varying structures. The NTC systems may find important applications in the biomedical, environmental, and military fields, where system degradability allows for benign integration into life and environment. In this paper, we analyze the NTC systems from the channel-modeling and capacity-analysis perspectives and focus on the stochastically meaningful slow transience scenario, where the coherence time of degeneration Td is much longer than the coding delay Tc. We first develop novel and parsimonious models to characterize the NTC channels, where three types of physical layers are considered: electromagnetism-based terahertz (THz) communication, diffusion-based molecular communication (DMC), and nanobots-assisted touchable communication (TouchCom). We then revisit the classical performance measure of ϵ-outage channel capacity and take a fresh look at its formulations in the NTC context. Next, we present the notion of capacity degeneration profile (CDP), which describes the reduction of channel capacity with respect to the degeneration time. Finally, we provide numerical examples to demonstrate the features of CDP. To the best of our knowledge, the current work represents a first attempt to systematically evaluate the quality of nanoscale communication systems deteriorating with time.

  19. New research trends on high-precision time transfer technology

    Institute of Scientific and Technical Information of China (English)

    DONG; Ruifang; QUAN; Run’ai; HOU; Feiyan; WANG; Shaofeng; XIANG; Xiao; ZHOU; Conghua; WANG; Mengmeng; LIU; Tao; ZHANG; Shou’gang

    2015-01-01

    High-precision time transfer plays an important role in the areas of fundamental research and applications. Accompanying w ith the remarkable improvements in the ability of generating and measuring high-accuracy time-frequency signal,seeking for new time-transfer techniques betw een distant clocks w ith much further improved accuracy attracts attentions w orld-w idely. The time-transfer technique based on optical pulses has the highest precision presently,and the further improvement in the accuracy is heavily dependent on the time-domain properties of the pulse as w ell as the sensitivity of the applied measurement on the exchanged pulse. The application of optical frequency comb in time transfer for a precision up to femtosecond level are currently the focus of much interest,and has recently achieved many breakthroughs. Further investigations show that,utilizing quantum techniques,i.e. quantum measurement technique and quantum optical pulse source,can lead to a new limit on the measured timing information. Furthermore,it can be immune from atmospheric parameters,such as pressure,temperature,humidity and so on.Such quantum improvements on time-transfer have a bright prospect in the future applications requiring extremely high-accuracy timing and ranging. The potential achievements w ill form a technical basis for the future realization of sub-femtosecond time transfer system.

  20. A novel method for transient detection in high-cadence optical surveys: Its application for a systematic search for novae in M31

    CERN Document Server

    Soraisam, Monika D; Kupfer, Thomas; Masci, Frank; Shafter, Allen W; Prince, Thomas A; Kulkarni, Shrinivas R; Ofek, Eran O; Bellm, Eric

    2016-01-01

    [abridged] In large-scale time-domain surveys, the processing of data, from procurement up to the detection of sources, is generally automated. One of the main challenges is contamination by artifacts, especially in regions of strong unresolved emission. We present a novel method for identifying candidates for variables and transients from the outputs of such surveys' data pipelines. We use the method to systematically search for novae in iPTF observations of the bulge of M31. We demonstrate that most artifacts produced by the iPTF pipeline form a locally uniform background of false detections approximately obeying Poissonian statistics, whereas genuine variables and transients as well as artifacts associated with bright stars result in clusters of detections, whose spread is determined by the source localization accuracy. This makes the problem analogous to source detection on images produced by X-ray telescopes, enabling one to utilize tools developed in X-ray astronomy. In particular, we use a wavelet-base...