WorldWideScience

Sample records for highly relevant document

  1. Establishment of ITER: Relevant documents

    International Nuclear Information System (INIS)

    1988-01-01

    At the Geneva Summit Meeting in November, 1985, a proposal was made by the Soviet Union to build a next-generation tokamak experiment on a collaborative basis involving the world's four major fusion blocks. In October, 1986, after consulting with Japan and the European Community, the United States responded with a proposal on how to implement such an activity. Ensuing diplomatic and technical discussions resulted in the establishment, under the auspices of the IAEA, of the International Thermonuclear Experimental Reactor Conceptual Design Activities. This tome represents a collection of all documents relating to the establishment of ITER, beginning with the initial meeting of the ITER Quadripartite Initiative Committee in Vienna on 15-16 March, 1987, through the meeting of the Provisional ITER Council, also in Vienna, on 8-9 February, 1988

  2. Relevant documents initiating the EDA

    International Nuclear Information System (INIS)

    1993-01-01

    In December 1990, the four ITER Parties successfully concluded the Conceptual Design Activities for ITER. In January, 1991, each of the Parties had decided to enter negotiations on co-operation in the ITER EDA, which are to be conducted under the auspices of the IAEA; and each Party was prepared to receive a letter of invitation from the Director General of the IAEA to participate in those negotiations. Four negotiating meetings were held in 1991, the first being in Vienna, the second in Tokyo, the third in Reston near Washington, and the fourth in Moscow. After completion of the negotiations, each of the Parties proceeded domestically to reach its decision to sign the ITER EDA Agreement and its Protocol 1. All formalities were concluded during the first half of 1992, and the EDA documents were signed in Washington on July 21, 1992. Following the signing, each of the Parties provided the Director General with the names of its two ITER Council members. With the formation of the Council, the EDA had begun. This volume contains the papers developed before the start of the EDA. It begins with the Director General's invitation to participate in the negotiations and ends with the Parties' designations of the ITER Council members. While the evolving text of the Agreement and its Protocol 1 is referred to in some of these papers as an attachment, it is only the final, signed text that is reproduced in this volume

  3. Using the Characteristics of Documents, Users and Tasks to Predict the Situational Relevance of Health Web Documents

    Directory of Open Access Journals (Sweden)

    Melinda Oroszlányová

    2017-09-01

    Full Text Available Relevance is usually estimated by search engines using document content, disregarding the user behind the search and the characteristics of the task. In this work, we look at relevance as framed in a situational context, calling it situational relevance, and analyze whether it is possible to predict it using documents, users and tasks characteristics. Using an existing dataset composed of health web documents, relevance judgments for information needs, user and task characteristics, we build a multivariate prediction model for situational relevance. Our model has an accuracy of 77.17%. Our findings provide insights into features that could improve the estimation of relevance by search engines, helping to conciliate the systemic and situational views of relevance. In a near future we will work on the automatic assessment of document, user and task characteristics.

  4. ITER interim design report package and relevant documents

    International Nuclear Information System (INIS)

    1996-01-01

    This publication documents the technical basis which underlay the Interim Design Report, Cost Review and Safety Analysis submitted to the ITER Councils (IC-8 and IC-9) Records of decisions and the ''ITER Interim Design Report Package''. This publication contains ITER Site Requirements and ITER Site Design Assumptions, TAC-8 Report, SRG Report, CP's Report on Tentative Sequence of Events and Parties' Views on the IDR Package and Parties' Technical Comments on the IDR Package. Figs, tabs

  5. Automated systems to identify relevant documents in product risk management

    Science.gov (United States)

    2012-01-01

    Background Product risk management involves critical assessment of the risks and benefits of health products circulating in the market. One of the important sources of safety information is the primary literature, especially for newer products which regulatory authorities have relatively little experience with. Although the primary literature provides vast and diverse information, only a small proportion of which is useful for product risk assessment work. Hence, the aim of this study is to explore the possibility of using text mining to automate the identification of useful articles, which will reduce the time taken for literature search and hence improving work efficiency. In this study, term-frequency inverse document-frequency values were computed for predictors extracted from the titles and abstracts of articles related to three tumour necrosis factors-alpha blockers. A general automated system was developed using only general predictors and was tested for its generalizability using articles related to four other drug classes. Several specific automated systems were developed using both general and specific predictors and training sets of different sizes in order to determine the minimum number of articles required for developing such systems. Results The general automated system had an area under the curve value of 0.731 and was able to rank 34.6% and 46.2% of the total number of 'useful' articles among the first 10% and 20% of the articles presented to the evaluators when tested on the generalizability set. However, its use may be limited by the subjective definition of useful articles. For the specific automated system, it was found that only 20 articles were required to develop a specific automated system with a prediction performance (AUC 0.748) that was better than that of general automated system. Conclusions Specific automated systems can be developed rapidly and avoid problems caused by subjective definition of useful articles. Thus the efficiency of

  6. "What is relevant in a text document?": An interpretable machine learning approach.

    Directory of Open Access Journals (Sweden)

    Leila Arras

    Full Text Available Text documents can be described by a number of abstract concepts such as semantic category, writing style, or sentiment. Machine learning (ML models have been trained to automatically map documents to these abstract concepts, allowing to annotate very large text collections, more than could be processed by a human in a lifetime. Besides predicting the text's category very accurately, it is also highly desirable to understand how and why the categorization process takes place. In this paper, we demonstrate that such understanding can be achieved by tracing the classification decision back to individual words using layer-wise relevance propagation (LRP, a recently developed technique for explaining predictions of complex non-linear classifiers. We train two word-based ML models, a convolutional neural network (CNN and a bag-of-words SVM classifier, on a topic categorization task and adapt the LRP method to decompose the predictions of these models onto words. Resulting scores indicate how much individual words contribute to the overall classification decision. This enables one to distill relevant information from text documents without an explicit semantic information extraction step. We further use the word-wise relevance scores for generating novel vector-based document representations which capture semantic information. Based on these document vectors, we introduce a measure of model explanatory power and show that, although the SVM and CNN models perform similarly in terms of classification accuracy, the latter exhibits a higher level of explainability which makes it more comprehensible for humans and potentially more useful for other applications.

  7. The Healing Power of Poison: Helpful Non-relevant Documents in Feedback

    NARCIS (Netherlands)

    Dehghani, M.; Abnar, S.; Kamps, J.

    2016-01-01

    The use of feedback information is an effective approach to address the vocabulary gap between a user's query and the relevant documents. It has been shown that some relevant documents act like "poison pills," i.e. they hurt the performance of feedback systems despite the fact that they are

  8. The Implementation of Cosine Similarity to Calculate Text Relevance between Two Documents

    Science.gov (United States)

    Gunawan, D.; Sembiring, C. A.; Budiman, M. A.

    2018-03-01

    Rapidly increasing number of web pages or documents leads to topic specific filtering in order to find web pages or documents efficiently. This is a preliminary research that uses cosine similarity to implement text relevance in order to find topic specific document. This research is divided into three parts. The first part is text-preprocessing. In this part, the punctuation in a document will be removed, then convert the document to lower case, implement stop word removal and then extracting the root word by using Porter Stemming algorithm. The second part is keywords weighting. Keyword weighting will be used by the next part, the text relevance calculation. Text relevance calculation will result the value between 0 and 1. The closer value to 1, then both documents are more related, vice versa.

  9. Relevant documents to IAEA regulations for the safe transport of radioactive materials

    International Nuclear Information System (INIS)

    El-Shinawy, R.M.K.; Sabek, M.G.; Gomma, M.

    1998-01-01

    IAEA regulations for the safe transport of radioactive materials provide standards for insuring a high level of safety of people, property, and environment against radiation, contamination, and criticality hazards as well as thermal effects associated with the transport of radioactive materials. IAEA routinely publishes technical reports which are relevant to radioactive material transportation such as INTERTRAN, directory of transport packaging test facilities, and others. A case study was performed to assess the impact of transporting radioactive materials through the suez canal using the two computer codes namely INTERTRAN and RADTRAN-4 which are part of IAEA technical documents. A comparison of the results of these two codes is given

  10. A DYNAMIC FEATURE SELECTION METHOD FOR DOCUMENT RANKING WITH RELEVANCE FEEDBACK APPROACH

    Directory of Open Access Journals (Sweden)

    K. Latha

    2010-07-01

    Full Text Available Ranking search results is essential for information retrieval and Web search. Search engines need to not only return highly relevant results, but also be fast to satisfy users. As a result, not all available features can be used for ranking, and in fact only a small percentage of these features can be used. Thus, it is crucial to have a feature selection mechanism that can find a subset of features that both meets latency requirements and achieves high relevance. In this paper we describe a 0/1 knapsack procedure for automatically selecting features to use within Generalization model for Document Ranking. We propose an approach for Relevance Feedback using Expectation Maximization method and evaluate the algorithm on the TREC Collection for describing classes of feedback textual information retrieval features. Experimental results, evaluated on standard TREC-9 part of the OHSUMED collections, show that our feature selection algorithm produces models that are either significantly more effective than, or equally effective as, models such as Markov Random Field model, Correlation Co-efficient and Count Difference method

  11. Standards, documents of relevance and directives in individual monitoring: is European individual monitoring in compliance with standards?

    International Nuclear Information System (INIS)

    Fantuzzi, E.

    2005-01-01

    have the same point of view of an IMS. A document of relevance is the result of the discussion and experience of a group of experts or a commission, who due to the high competence and experience of the members, can make of the document a very high level of reference in the field of interest. ICRP recommendations and ICRU publications belong to this category, together with publications (i.e. reports, guides) by more or less global level represented governmental international organization as EC and IAEA. None of the two categories are mandatory therefore legislation is needed to express legal requirements, often based on more than a standard or documents of relevance. As regards legislation, the Council Directive 96/29/EURATOM and its implementation in each EU Member States has fostered harmonization of the approach (i.e. approval of dosimetric services), the requirements and, last but not least, of the reference quantities for individual monitoring within EU. (author)

  12. Effect of Mental State on the Rate of Identifying the Relevancy of Documents Retrieved in a Search

    Directory of Open Access Journals (Sweden)

    Faezeh Farhoudi

    2009-07-01

    Full Text Available The present study investigates the link between various users’ mental state while searching information systems with the outcome of the resulting documents retrieved. Various factors such as user knowledge, search skills, motivation and aims influence the decisions and evaluation of users regarding documents retrieved. MMPI instrument was used to identify users’ mental states. The sample was drawn from female senior students of librarianship, using systematic random sampling. The findings indicated that anxiety and depression have significant inverse relationship to the rate of relevancy identification of the documents retrieved by the users.

  13. A Relevance-Extended Multi-dimensional Model for a Data Warehouse Contextualized with Documents

    DEFF Research Database (Denmark)

    Perez, Juan Manuel; Pedersen, Torben Bach; Berlanga, Rafael

    2005-01-01

    Current data warehouse and OLAP technologies can be applied to analyze the structured data that companies store in their databases. The circumstances that describe the context associated with these data can be found in other internal and external sources of documents. In this paper we propose...... to combine the traditional corporate data warehouse with a document warehouse, resulting in a contextualized warehouse. Thus, contextualized warehouses keep a historical record of the facts and their contexts as described by the documents. In this framework, the user selects an analysis context which...

  14. The Effects of Topic Familiarity, Author Expertise, and Content Relevance on Norwegian Students' Document Selection: A Mixed Methods Study

    Science.gov (United States)

    McCrudden, Matthew T.; Stenseth, Tonje; Bråten, Ivar; Strømsø, Helge I.

    2016-01-01

    This mixed methods study investigated the extent to which author expertise and content relevance were salient to secondary Norwegian students (N = 153) when they selected documents that pertained to more familiar and less familiar topics. Quantitative results indicated that author expertise was more salient for the less familiar topic (nuclear…

  15. Commercial agreements and documentation relevant for project financing renewable energy schemes

    International Nuclear Information System (INIS)

    1997-01-01

    Renewable energy projects covered by the NFFO Orders are distinguished by the fact that the key contract in any project is in effect a standard form contract in the form of the Power Purchase Agreement with the Non-Fossil Purchasing Agency Limited (''NFPA''). However our research has indicated that general contract standardization is unlikely to be practicable in the short term, although it is thought that the production of a range of specimen documents in the context of this study with input from various representative industry associations could lead to a more consistent approach to the negotiation and structuring of projects and facilitate the presentation of projects at the funding stage. We have produced a suite of documents which are specimens of the sorts of agreements that lenders are likely to find acceptable. The range of documents which we have produced covers the principal contractual arrangements for a typical renewable energy project (including full text or abridged agreements), for a land lease and for agreements for design and build, operation and maintenance, waste supply, wind lease, landfill gas, and forestry residue supply. We have produced an insurance scope of cover and financing documentation including a due diligence check list, term sheet, and a facility agreement with related security documentation. (author)

  16. ITER final design report, cost review and safety analysis (FDR) and relevant documents

    International Nuclear Information System (INIS)

    1999-01-01

    This volume contains the fourth major milestone report and documents associated with its acceptance, review and approval. This ITER Final Design Report, Cost Review and Safety Analysis was presented to the ITER Council at its 13th meeting in February 1998 and was approved at its extraordinary meeting on 25 June 1998. The contents include an outline of the ITER objectives, the ITER parameters and design overview as well as operating scenarios and plasma performance. Furthermore, design features, safety and environmental characteristics and schedule and cost estimates are given

  17. Compendium of ORD and OSWER documents relevant to RCRA corrective action

    International Nuclear Information System (INIS)

    1992-04-01

    Throughout the past decade, several offices within the US Environmental Protection Agency (EPA) have been involved in hazardous waste management technologies research, remedial action at chemically contaminated sites, and regulatory development for permitting hazardous waste management facilities. The primary offices involved in these activities include the Office of Research and Development (ORD) and the Office of Solid Waste and Emergency Response (OSWER). During this period, substantial knowledge and experience have been gained relevant to the a placability of remedial action technologies in various environmental setting

  18. High-level waste tank farm set point document

    International Nuclear Information System (INIS)

    Anthony, J.A. III.

    1995-01-01

    Setpoints for nuclear safety-related instrumentation are required for actions determined by the design authorization basis. Minimum requirements need to be established for assuring that setpoints are established and held within specified limits. This document establishes the controlling methodology for changing setpoints of all classifications. The instrumentation under consideration involve the transfer, storage, and volume reduction of radioactive liquid waste in the F- and H-Area High-Level Radioactive Waste Tank Farms. The setpoint document will encompass the PROCESS AREA listed in the Safety Analysis Report (SAR) (DPSTSA-200-10 Sup 18) which includes the diversion box HDB-8 facility. In addition to the PROCESS AREAS listed in the SAR, Building 299-H and the Effluent Transfer Facility (ETF) are also included in the scope

  19. High-level waste tank farm set point document

    Energy Technology Data Exchange (ETDEWEB)

    Anthony, J.A. III

    1995-01-15

    Setpoints for nuclear safety-related instrumentation are required for actions determined by the design authorization basis. Minimum requirements need to be established for assuring that setpoints are established and held within specified limits. This document establishes the controlling methodology for changing setpoints of all classifications. The instrumentation under consideration involve the transfer, storage, and volume reduction of radioactive liquid waste in the F- and H-Area High-Level Radioactive Waste Tank Farms. The setpoint document will encompass the PROCESS AREA listed in the Safety Analysis Report (SAR) (DPSTSA-200-10 Sup 18) which includes the diversion box HDB-8 facility. In addition to the PROCESS AREAS listed in the SAR, Building 299-H and the Effluent Transfer Facility (ETF) are also included in the scope.

  20. High-level waste issues and resolutions document

    International Nuclear Information System (INIS)

    1994-05-01

    The High-Level Waste (HLW) Issues and Resolutions Document recognizes US Department of Energy (DOE) complex-wide HLW issues and offers potential corrective actions for resolving these issues. Westinghouse Management and Operations (M ampersand O) Contractors are effectively managing HLW for the Department of Energy at four sites: Idaho National Engineering Laboratory (INEL), Savannah River Site (SRS), West Valley Demonstration Project (WVDP), and Hanford Reservation. Each site is at varying stages of processing HLW into a more manageable form. This HLW Issues and Resolutions Document identifies five primary issues that must be resolved in order to reach the long-term objective of HLW repository disposal. As the current M ampersand O contractor at DOE's most difficult waste problem sites, Westinghouse recognizes that they have the responsibility to help solve some of the complexes' HLW problems in a cost effective manner by encouraging the M ampersand Os to work together by sharing expertise, eliminating duplicate efforts, and sharing best practices. Pending an action plan, Westinghouse M ampersand Os will take the initiative on those corrective actions identified as the responsibility of an M ampersand O. This document captures issues important to the management of HLW. The proposed resolutions contained within this document set the framework for the M ampersand Os and DOE work cooperatively to develop an action plan to solve some of the major complex-wide problems. Dialogue will continue between the M ampersand Os, DOE, and other regulatory agencies to work jointly toward the goal of storing, treating, and immobilizing HLW for disposal in an environmentally sound, safe, and cost effective manner

  1. Strategy Guideline: Advanced Construction Documentation Recommendations for High Performance Homes

    Energy Technology Data Exchange (ETDEWEB)

    Lukachko, A.; Gates, C.; Straube, J.

    2011-12-01

    As whole house energy efficiency increases, new houses become less like conventional houses that were built in the past. New materials and new systems require greater coordination and communication between industry stakeholders. The Guideline for Construction Documents for High Performance Housing provides advice to address this need. The reader will be presented with four changes that are recommended to achieve improvements in energy efficiency, durability and health in Building America houses: create coordination drawings, improve specifications, improve detail drawings, and review drawings and prepare a Quality Control Plan.

  2. Relevance of health level 7 clinical document architecture and integrating the healthcare enterprise cross-enterprise document sharing profile for managing chronic wounds in a telemedicine context.

    Science.gov (United States)

    Finet, Philippe; Gibaud, Bernard; Dameron, Olivier; Le Bouquin Jeannès, Régine

    2016-03-01

    The number of patients with complications associated with chronic diseases increases with the ageing population. In particular, complex chronic wounds raise the re-admission rate in hospitals. In this context, the implementation of a telemedicine application in Basse-Normandie, France, contributes to reduce hospital stays and transport. This application requires a new collaboration among general practitioners, private duty nurses and the hospital staff. However, the main constraint mentioned by the users of this system is the lack of interoperability between the information system of this application and various partners' information systems. To improve medical data exchanges, the authors propose a new implementation based on the introduction of interoperable clinical documents and a digital document repository for managing the sharing of the documents between the telemedicine application users. They then show that this technical solution is suitable for any telemedicine application and any document sharing system in a healthcare facility or network.

  3. Epistolary Documents in High-Medieval History-Writing

    DEFF Research Database (Denmark)

    Bainton, Henry

    2018-01-01

    This article focuses on the way history-writers in the reign of King Henry II (King of England, Duke of Normandy and of Aquitaine, and Count of Anjou, d. 1189) quoted documents in their histories. Although scholars have often identified documentary quotation as the most distinctive feature...

  4. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 7

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    This Requirements Identification Document (RID) describes an Occupational Health and Safety Program as defined through the Relevant DOE Orders, regulations, industry codes/standards, industry guidance documents and, as appropriate, good industry practice. The definition of an Occupational Health and Safety Program as specified by this document is intended to address Defense Nuclear Facilities Safety Board Recommendations 90-2 and 91-1, which call for the strengthening of DOE complex activities through the identification and application of relevant standards which supplement or exceed requirements mandated by DOE Orders. This RID applies to the activities, personnel, structures, systems, components, and programs involved in maintaining the facility and executing the mission of the High-Level Waste Storage Tank Farms.

  5. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 7

    International Nuclear Information System (INIS)

    1994-04-01

    This Requirements Identification Document (RID) describes an Occupational Health and Safety Program as defined through the Relevant DOE Orders, regulations, industry codes/standards, industry guidance documents and, as appropriate, good industry practice. The definition of an Occupational Health and Safety Program as specified by this document is intended to address Defense Nuclear Facilities Safety Board Recommendations 90-2 and 91-1, which call for the strengthening of DOE complex activities through the identification and application of relevant standards which supplement or exceed requirements mandated by DOE Orders. This RID applies to the activities, personnel, structures, systems, components, and programs involved in maintaining the facility and executing the mission of the High-Level Waste Storage Tank Farms

  6. The Measurement of Relevance Amount of Documents That By Using of Google cross-language retrieval About Agriculture Subject Area are Retrieved

    Directory of Open Access Journals (Sweden)

    Fatemeh Jamshidi Ghahfarokhi

    2014-02-01

    Full Text Available In this study, the relevance amount of documents has been investigated by using google cross-language retrieval tools about a agriculture subject area in cross-language retrieval form, are retrieved. For this purpose, by using Persian journals articles that have had English abstracts, Persian phrases and subject terms with their English equivalent were extracted. In three class us, thirty number of phrases and subject terms of agriculture area were extracted: First class, subject phrases that only in agriculture are used; Secondary, agriculture subject terms that in other fields are used too; Third class, agriculture subject terms that out of this field are considered as public term. Then by these phrases and terms, documents were searched, and relevance amount of search results are investigated. Results of study showed that google cross-language retrieval tools for two classes of phrases and terms, in cross-language retrieval of relevance document about agriculture subject area, aren`t succeed: one class, agriculture subject terms that in other fields are used too. other class, agriculture subject terms that out of agriculture field are considered as public term. Google cross-language retrieval tools about subject phrase and terms that only in agriculture field are used, are performance rather desirable than other two class of phrase and terms

  7. Highly Reducing Partitioning Experiments Relevant to the Planet Mercury

    Science.gov (United States)

    Rowland, Rick, II; Vander Kaaden, Kathleen E.; McCubbin, Francis M.; Danielson, Lisa R.

    2017-01-01

    With the data returned from the MErcury Surface Space ENvironment GEochemistry and Ranging (MESSENGER) mission, there are now numerous constraints on the physical and chemical properties of Mercury, including its surface composition. The high S and low FeO contents observed from MESSENGER on the planet's surface suggests a low oxygen fugacity of the present planetary materials. Estimates of the oxygen fugacity for Mercurian magmas are approximately 3-7 log units below the Iron-Wüstite (Fe-FeO) oxygen buffer, several orders of magnitude more reducing than other terrestrial bodies we have data from such as the Earth, Moon, or Mars. Most of our understanding of elemental partitioning behavior comes from observations made on terrestrial rocks, but Mercury's oxygen fugacity is far outside the conditions of those samples. With limited oxygen available, lithophile elements may instead exhibit chalcophile, halophile, or siderophile behaviors. Furthermore, very few natural samples of rocks that formed under reducing conditions are available in our collections (e.g., enstatite chondrites, achondrites, aubrites). With this limited amount of material, we must perform experiments to determine the elemental partitioning behavior of typically lithophile elements as a function of decreasing oxygen fugacity. Experiments are being conducted at 4 GPa in an 880-ton multi-anvil press, at temperatures up to 1850degC. The composition of starting materials for the experiments were selected for the final run products to contain metal, silicate melt, and sulfide melt phases. Oxygen fugacity is controlled in the experiments by adding silicon metal to the samples, using the Si-SiO2 oxygen buffer, which is approximately 5 log units more reducing than the Fe-FeO oxygen buffer at our temperatures of interest. The target silicate melt compositional is diopside (CaMgSi2O6) because measured surface compositions indicate partial melting of a pyroxene-rich mantle. Elements detected on Mercury

  8. High resolution electron attachment to molecules of atmospheric relevance

    International Nuclear Information System (INIS)

    Senn, G.

    2000-10-01

    This Ph.D. thesis is divided into three parts. The first is an introduction into the field of electron attachment. In the second part the experimental apparatus is described, and in the third part the results are presented. In the present thesis molecules were chosen for our investigations that are not only of academic interest but that also play an important role for applications or even the life on this planet. All the molecules studied in this work are of atmospheric relevance. NO, and OClO, are involved in the ozone depletion of the stratosphere. The D-layer of the ionosphere is an upper boundary of the ozone layer, therefore the interaction of the electrons from the D-layer with O 3 might play an important role for the chemistry in that part of the atmosphere. Especially the interaction of slow electrons (that will be present in the D-layer in large numbers) with ozone was emphasized in the present study. The production of O - and O 2 - by dissociative electron attachment to ozone was measured for incident electron energies between 0 and 10eV. A previously unobserved sharp structure was discovered in the formation of O - ions for electrons with zero kinetic energy. This additional cross section peak has important consequences for the role of ozone in the anion formation process in the ionosphere. Since OClO is a night time reservoir for chlorine atoms (Cl) and chlorine monoxide (ClO) both of which play a critical role in the depletion of the stratospheric ozone, we have studied negative ion formation following electron impact (0-10eV) to OClO. Despite its atmospheric relevance the mechanism of dissociative electron attachment (DEA) to NO is still a matter of controversy. DEA was studied at high energy resolution and with a kinetic-energy analysis of the O - fragment in two independent crossed electron-molecular-beam experiments. The DEA cross section exhibits a vertical onset near 7.45eV that corresponds to the energy threshold of the DEA channel O - ( 2 P

  9. Deep learning relevance

    DEFF Research Database (Denmark)

    Lioma, Christina; Larsen, Birger; Petersen, Casper

    2016-01-01

    train a Recurrent Neural Network (RNN) on existing relevant information to that query. We then use the RNN to "deep learn" a single, synthetic, and we assume, relevant document for that query. We design a crowdsourcing experiment to assess how relevant the "deep learned" document is, compared...... to existing relevant documents. Users are shown a query and four wordclouds (of three existing relevant documents and our deep learned synthetic document). The synthetic document is ranked on average most relevant of all....

  10. Defense High Level Waste Disposal Container System Description Document

    International Nuclear Information System (INIS)

    Pettit, N. E.

    2001-01-01

    The Defense High Level Waste Disposal Container System supports the confinement and isolation of waste within the Engineered Barrier System of the Monitored Geologic Repository (MGR). Disposal containers are loaded and sealed in the surface waste handling facilities, transferred to the underground through the accesses using a rail mounted transporter, and emplaced in emplacement drifts. The defense high level waste (HLW) disposal container provides long-term confinement of the commercial HLW and defense HLW (including immobilized plutonium waste forms [IPWF]) placed within disposable canisters, and withstands the loading, transfer, emplacement, and retrieval loads and environments. US Department of Energy (DOE)-owned spent nuclear fuel (SNF) in disposable canisters may also be placed in a defense HLW disposal container along with commercial HLW waste forms, which is known as co-disposal. The Defense High Level Waste Disposal Container System provides containment of waste for a designated period of time, and limits radionuclide release. The disposal container/waste package maintains the waste in a designated configuration, withstands maximum handling and rockfall loads, limits the individual canister temperatures after emplacement, resists corrosion in the expected handling and repository environments, and provides containment of waste in the event of an accident. Defense HLW disposal containers for HLW disposal will hold up to five HLW canisters. Defense HLW disposal containers for co-disposal will hold up to five HLW canisters arranged in a ring and one DOE SNF canister inserted in the center and/or one or more DOE SNF canisters displacing a HLW canister in the ring. Defense HLW disposal containers also will hold two Multi-Canister Overpacks (MCOs) and two HLW canisters in one disposal container. The disposal container will include outer and inner cylinders, outer and inner cylinder lids, and may include a canister guide. An exterior label will provide a means by

  11. Defense High Level Waste Disposal Container System Description Document

    International Nuclear Information System (INIS)

    2000-01-01

    The Defense High Level Waste Disposal Container System supports the confinement and isolation of waste within the Engineered Barrier System of the Monitored Geologic Repository (MGR). Disposal containers are loaded and sealed in the surface waste handling facilities, transferred to the underground through the accesses using a rail mounted transporter, and emplaced in emplacement drifts. The defense high level waste (HLW) disposal container provides long-term confinement of the commercial HLW and defense HLW (including immobilized plutonium waste forms (IPWF)) placed within disposable canisters, and withstands the loading, transfer, emplacement, and retrieval loads and environments. U.S. Department of Energy (DOE)-owned spent nuclear fuel (SNF) in disposable canisters may also be placed in a defense HLW disposal container along with commercial HLW waste forms, which is known as 'co-disposal'. The Defense High Level Waste Disposal Container System provides containment of waste for a designated period of time, and limits radionuclide release. The disposal container/waste package maintains the waste in a designated configuration, withstands maximum handling and rockfall loads, limits the individual canister temperatures after emplacement, resists corrosion in the expected handling and repository environments, and provides containment of waste in the event of an accident. Defense HLW disposal containers for HLW disposal will hold up to five HLW canisters. Defense HLW disposal containers for co-disposal will hold up to five HLW canisters arranged in a ring and one DOE SNF canister in the ring. Defense HLW disposal containers also will hold two Multi-Canister Overpacks (MCOs) and two HLW canisters in one disposal container. The disposal container will include outer and inner cylinders, outer and inner cylinder lids, and may include a canister guide. An exterior label will provide a means by which to identify the disposal container and its contents. Different materials

  12. Relevance of high-dose chemotherapy in solid tumours

    NARCIS (Netherlands)

    Nieboer, P; de Vries, EGE; Mulder, NH; van der Graaf, WTA

    Drug resistance is a major problem in the treatment of solid tumours. Based on a steep dose-response relationship for especially alkylating agents on tumour cell survival, high-dose chemotherapy was considered of interest for the treatment of solid tumours. Results of phase 1 and 2 studies with

  13. Healthcare market research examined. Relevant, rigorous and highly regulated

    Directory of Open Access Journals (Sweden)

    Bob Douglas

    2011-10-01

    Full Text Available [The abstract of this article is not available. Here are the first sentences of the article. The full text is freely available upon registration]Market research is invariably confused with marketing – but, in fact, the two disciplines are very different. Put in its simplest terms, marketing is about promotion whilst market research is about understanding. Accordingly, data collected for market research purposes are used in a completely different way to that gathered for marketing, with research practices heavily regulated to ensure high ethical standards.Let’s begin with a definition of what, exactly, market research is. According to the ICC/ESOMAR International Code 2007 (a definition also adopted by the European Pharmaceutical Market Research Association, it is: «the systematic gathering and interpretation of information about individuals or organisations using the statistical and analytical methods and techniques of the applied social sciences to gain insight or support decision-making. The identity of respondents will not be revealed to the user of the information without explicit consent and no sales approach will be made to them as a direct result of their having provided information».

  14. Relevance of axionlike particles for very-high-energy astrophysics

    International Nuclear Information System (INIS)

    De Angelis, Alessandro; Galanti, Giorgio; Roncadelli, Marco

    2011-01-01

    Several extensions of the standard model and, in particular, superstring theories suggest the existence of axionlike particles (ALPs), which are very light spin-zero bosons with a two-photon coupling. As a consequence, photon-ALP oscillations occur in the presence of an external magnetic field, and ALPs can lead to observable effects on the measured photon spectrum of astrophysical sources. An intriguing situation arises when blazars are observed in the very-high-energy (VHE) band--namely, above 100 GeV--as it is the case with the presently operating Imaging Atmospheric Cherenkov Telescopes H.E.S.S, Major Atmospheric Gamma Imaging Cherenkov telescope, Collaboration of Australia and Nippon for a Gamma Ray Observatory in the Outback III, and VERITAS. The extragalactic background light produced by galaxies during cosmic evolution gives rise to a source dimming which becomes important in the VHE band and increases with energy, since hard photons from a blazar scatter off soft extragalactic background light photons thereby disappearing into e + e - pairs. This dimming can be considerably reduced by photon-ALP oscillations, and since they are energy independent the resulting blazar spectra become harder than expected. We consider throughout a scenario first proposed by De Angelis, Roncadelli, and Mansutti in which the above strategy is implemented with photon-ALP oscillations triggered by large-scale magnetic fields, and we systematically investigate its implications for VHE blazars. We find that for ALPs lighter than 5·10 -10 eV the photon survival probability is larger than predicted by conventional physics above a few hundred GeV. Specifically, a boost factor of 10 can easily occur for sources at large distance and large energy, e.g. at 8 TeV for the blazar 1ES 0347-121 at redshift z=0.188. This is a clear-cut prediction which can be tested with the planned Cherenkov Telescope Array and the High Altitude Water Cherenkov Experiment (HAWC) water Cherenkov

  15. Final technical position on documentation of computer codes for high-level waste management

    International Nuclear Information System (INIS)

    Silling, S.A.

    1983-06-01

    Guidance is given for the content of documentation of computer codes which are used in support of a license application for high-level waste disposal. The guidelines cover theoretical basis, programming, and instructions for use of the code

  16. Decision Document for Heat Removal from High-Level Waste Tanks

    International Nuclear Information System (INIS)

    WILLIS, W.L.

    2000-01-01

    This document establishes the combination of design and operational configurations that will be used to provide heat removal from high-level waste tanks during Phase 1 waste feed delivery to prevent the waste temperature from exceeding tank safety requirement limits. The chosen method--to use the primary and annulus ventilation systems to remove heat from the high-level waste tanks--is documented herein

  17. Consideration of a new definition of clinically relevant myocardial infarction after coronary revascularization: an expert consensus document from the Society for Cardiovascular Angiography and Interventions (SCAI).

    Science.gov (United States)

    Moussa, Issam D; Klein, Lloyd W; Shah, Binita; Mehran, Roxana; Mack, Michael J; Brilakis, Emmanouil S; Reilly, John P; Zoghbi, Gilbert; Holper, Elizabeth; Stone, Gregg W

    2014-01-01

    Numerous definitions have been proposed for the diagnosis of myocardial infarction (MI) after coronary revascularization. The universal definition for MI designates post procedural biomarker thresholds for defining percutaneous coronary intervention (PCI)-related MI (type 4a) and coronary artery bypass grafting (CABG)-related MI (type 5) which are of uncertain prognostic importance. In addition, for both MI types cTn is recommended as the biomarker of choice, the prognostic significance of which is less well validated than CK-MB. Widespread adoption of a MI definition not clearly linked to subsequent adverse events such as mortality or heart failure may have serious consequences for the appropriate assessment of devices and therapies, may affect clinical care pathways, and may result in misinterpretation of physician competence. Rather than employing an MI definition sensitive for small degrees of myonecrosis (the occurrence of which, based on contemporary large-scale studies, are unlikely to have important clinical consequences), it is instead recommended that a threshold level of biomarker elevation which has been strongly linked to subsequent adverse events in clinical studies be used to define a "clinically relevant MI." The present document introduces a new definition for "clinically relevant MI" after coronary revascularization (PCI or CABG) which is applicable for use in clinical trials, patient care, and quality outcomes assessment. Copyright © 2013 Wiley Periodicals, Inc.

  18. The more it changes; the more it remains the same: a Foucauldian analysis of Canadian policy documents relevant to student selection for medical school.

    Science.gov (United States)

    Razack, Saleem; Lessard, David; Hodges, Brian D; Maguire, Mary H; Steinert, Yvonne

    2014-05-01

    Calls to increase the demographic representativeness of medical classes to better reflect the diversity of society are part of a growing international trend. Despite this, entry into medical school remains highly competitive and exclusive of marginalized groups. To address these questions, we conducted a Foucauldian discourse analysis of 15 publically available policy documents from the websites of Canadian medical education regulatory bodies, using the concepts of "excellence" (institutional or in an applicant), "diversity," and "equity" to frame the analysis. In most documents, there were appeals to broaden definitions of institutional excellence to include concerns for greater social accountability. Equity concerns tended to be represented as needing to be dealt with by people in positions of authority in order to counter a "hidden curriculum." Diversity was represented as an object of value, situated within a discontinuous history. As a rhetorical strategy, documents invoked complex societal shifts to promote change toward a more humanistic medical education system and profession. "Social accountability" was reified as an all-encompassing solution to most issues of representation. Although the policy documents proclaimed rootedness in an ethos of improving the societal responsiveness of the medical profession, our analysis takes a more critical stance towards the discourses identified. On the basis of our research findings, we question whether these calls may contribute to the maintenance of the specific power relations they seek to address. These conclusions lead us to consider the possibility that the discourses represented in the documents might be reframed to take into account issues of power distribution and its productive and reproductive features. A reframing of discourses could potentially generate greater inclusiveness in policy development processes, and afford disadvantaged and marginalized groups more participatory roles in the discussion.

  19. 77 FR 11785 - Energy Conservation Program: Public Meeting and Availability of the Framework Document for High...

    Science.gov (United States)

    2012-02-28

    ... standards for high-intensity discharge (HID) lamps. Accordingly, DOE will hold a public meeting to discuss..._standards/commercial/high_intensity_discharge_lamps.html . DATES: The Department will hold a public meeting... Technologies Program, Mailstop EE-2J, Framework Document for High-Intensity Discharge Lamps, EERE-2010-BT-STD...

  20. Learning High-Order Filters for Efficient Blind Deconvolution of Document Photographs

    KAUST Repository

    Xiao, Lei

    2016-09-16

    Photographs of text documents taken by hand-held cameras can be easily degraded by camera motion during exposure. In this paper, we propose a new method for blind deconvolution of document images. Observing that document images are usually dominated by small-scale high-order structures, we propose to learn a multi-scale, interleaved cascade of shrinkage fields model, which contains a series of high-order filters to facilitate joint recovery of blur kernel and latent image. With extensive experiments, we show that our method produces high quality results and is highly efficient at the same time, making it a practical choice for deblurring high resolution text images captured by modern mobile devices. © Springer International Publishing AG 2016.

  1. Brief report: Inhibitory control of socially relevant stimuli in children with high functioning autism

    NARCIS (Netherlands)

    Geurts, H.M.; Begeer, S.; Stockman, L.

    2009-01-01

    The current study explored whether inhibitory control deficits in high functioning autism (HFA) emerged when socially relevant stimuli were used and whether arousal level affected the performance. A Go/NoGo paradigm, with socially relevant stimuli and varying presentation rates, was applied in 18

  2. Lower hybrid current drive at ITER-relevant high plasma densities

    International Nuclear Information System (INIS)

    Cesario, R.; Amicucci, L.; Cardinali, A.; Castaldo, C.; Marinucci, M.; Panaccione, L.; Pericoli-Ridolfini, V.; Tuccillo, A. A.; Tudisco, O.; Calabro, G.

    2009-01-01

    Recent experiments indicated that a further non-inductive current, besides bootstrap, should be necessary for developing advanced scenario for ITER. The lower hybrid current drive (LHCD) should provide such tool, but its effectiveness was still not proved in operations with ITER-relevant density of the plasma column periphery. Progress of the LH deposition modelling is presented, performed considering the wave physics of the edge, and different ITER-relevant edge parameters. Operations with relatively high edge electron temperatures are expected to reduce the LH || spectral broadening and, consequently, enabling the LH power to propagate also in high density plasmas ( || is the wavenumber component aligned to the confinement magnetic field). New results of FTU experiments are presented, performed by following the aforementioned modeling: they indicate that, for the first time, the LHCD conditions are established by operating at ITER-relevant high edge densities.

  3. Content analysis to detect high stress in oral interviews and text documents

    Science.gov (United States)

    Thirumalainambi, Rajkumar (Inventor); Jorgensen, Charles C. (Inventor)

    2012-01-01

    A system of interrogation to estimate whether a subject of interrogation is likely experiencing high stress, emotional volatility and/or internal conflict in the subject's responses to an interviewer's questions. The system applies one or more of four procedures, a first statistical analysis, a second statistical analysis, a third analysis and a heat map analysis, to identify one or more documents containing the subject's responses for which further examination is recommended. Words in the documents are characterized in terms of dimensions representing different classes of emotions and states of mind, in which the subject's responses that manifest high stress, emotional volatility and/or internal conflict are identified. A heat map visually displays the dimensions manifested by the subject's responses in different colors, textures, geometric shapes or other visually distinguishable indicia.

  4. Highly Relevant Mentoring (HRM) as a Faculty Development Model for Web-Based Instruction

    Science.gov (United States)

    Carter, Lorraine; Salyers, Vincent; Page, Aroha; Williams, Lynda; Albl, Liz; Hofsink, Clarence

    2012-01-01

    This paper describes a faculty development model called the highly relevant mentoring (HRM) model; the model includes a framework as well as some practical strategies for meeting the professional development needs of faculty who teach web-based courses. The paper further emphasizes the need for faculty and administrative buy-in for HRM and…

  5. British Literature: Increasing Relevancy for High School Seniors through Multicultural Augmentation.

    Science.gov (United States)

    Kirkland, Nancy C.

    A practicum aimed to increase the relevancy (to the ethnically diverse students of contemporary classrooms) of the regular high school senior English course in British literature and composition by expanding the curriculum to include selections from countries (other than the United States) influenced by the British Colonial Empire. Using a…

  6. Status of High Flux Isotope Reactor (HFIR) post-restart safety analysis and documentation upgrades

    International Nuclear Information System (INIS)

    Cook, D.H.; Radcliff, T.D.; Rothrock, R.B.; Schreiber, R.E.

    1990-01-01

    The High Flux Isotope Reactor (HFIR), an experimental reactor located at the Oak Ridge National Laboratory (ORNL) and operated for the US Department of Energy by Martin Marietta Energy Systems, was shut down in November, 1986 after the discovery of unexpected neutron embrittlement of the reactor vessel. The reactor was restarted in April, 1989, following an extensive review by DOE and ORNL of the HFIR design, safety, operation, maintenance and management, and the implementation of several upgrades to HFIR safety-related hardware, analyses, documents and procedures. This included establishing new operating conditions to provide added margin against pressure vessel failure, as well as the addition, or upgrading, of specific safety-related hardware. This paper summarizes the status of some of the follow-on (post-restart) activities which are currently in progress, and which will result in a comprehensive set of safety analyses and documentation for the HFIR, comparable with current practice in commercial nuclear power plants. 8 refs

  7. High level waste storage tanks 242-A evaporator standards/requirement identification document

    International Nuclear Information System (INIS)

    Biebesheimer, E.

    1996-01-01

    This document, the Standards/Requirements Identification Document (S/RIDS) for the subject facility, represents the necessary and sufficient requirements to provide an adequate level of protection of the worker, public health and safety, and the environment. It lists those source documents from which requirements were extracted, and those requirements documents considered, but from which no requirements where taken. Documents considered as source documents included State and Federal Regulations, DOE Orders, and DOE Standards

  8. Repository environmental parameters and models/methodologies relevant to assessing the performance of high-level waste packages in basalt, tuff, and salt

    Energy Technology Data Exchange (ETDEWEB)

    Claiborne, H.C.; Croff, A.G.; Griess, J.C.; Smith, F.J.

    1987-09-01

    This document provides specifications for models/methodologies that could be employed in determining postclosure repository environmental parameters relevant to the performance of high-level waste packages for the Basalt Waste Isolation Project (BWIP) at Richland, Washington, the tuff at Yucca Mountain by the Nevada Test Site, and the bedded salt in Deaf Smith County, Texas. Guidance is provided on the identify of the relevant repository environmental parameters; the models/methodologies employed to determine the parameters, and the input data base for the models/methodologies. Supporting studies included are an analysis of potential waste package failure modes leading to identification of the relevant repository environmental parameters, an evaluation of the credible range of the repository environmental parameters, and a summary of the review of existing models/methodologies currently employed in determining repository environmental parameters relevant to waste package performance. 327 refs., 26 figs., 19 tabs.

  9. Repository environmental parameters and models/methodologies relevant to assessing the performance of high-level waste packages in basalt, tuff, and salt

    International Nuclear Information System (INIS)

    Claiborne, H.C.; Croff, A.G.; Griess, J.C.; Smith, F.J.

    1987-09-01

    This document provides specifications for models/methodologies that could be employed in determining postclosure repository environmental parameters relevant to the performance of high-level waste packages for the Basalt Waste Isolation Project (BWIP) at Richland, Washington, the tuff at Yucca Mountain by the Nevada Test Site, and the bedded salt in Deaf Smith County, Texas. Guidance is provided on the identify of the relevant repository environmental parameters; the models/methodologies employed to determine the parameters, and the input data base for the models/methodologies. Supporting studies included are an analysis of potential waste package failure modes leading to identification of the relevant repository environmental parameters, an evaluation of the credible range of the repository environmental parameters, and a summary of the review of existing models/methodologies currently employed in determining repository environmental parameters relevant to waste package performance. 327 refs., 26 figs., 19 tabs

  10. Nursing documentation in inpatient psychiatry: The relevance of nurse-patient interactions in progress notes-A focus group study with mental health staff.

    Science.gov (United States)

    Myklebust, Kjellaug K; Bjørkly, Stål; Råheim, Målfrid

    2018-02-01

    To gain insight into mental health staff's perception of writing progress notes in an acute and subacute psychiatric ward context. The nursing process structures nursing documentation. Progress notes are intended to be an evaluation of a patient's nursing diagnoses, interventions and outcomes. Within this template, a patient's status and the care provided are to be recorded. The therapeutic nurse-patient relationship is recognised as a key component of psychiatric care today. At the same time, the biomedical model remains strong. Research literature exploring nursing staff's experiences with writing progress notes in psychiatric contexts, and especially the space given to staff-patient relations, is sparse. Qualitative design. Focus group interviews with mental health staff working in one acute and one subacute psychiatric ward were conducted. Systematic text condensation, a method for transverse thematic analysis, was used. Two main categories emerged from the analysis: the position of the professional as an expert and distant observer in the progress notes, and the weak position of professional-patient interactions in progress notes. The participants did not perceive that the current recording model, which is based on the nursing process, supported a focus on patients' resources or reporting professional-patient interactions. This model appeared to put ward staff in an expert position in relation to patients, which made it challenging to involve patients in the recording process. Essential aspects of nursing care related to recovery and person-centred care were not prioritised for documentation. This study contributes to the critical examination of the documentation praxis, as well as to the critical examination of the documentation tool as to what is considered important to document. © 2017 John Wiley & Sons Ltd.

  11. Washington State's Lystedt law in concussion documentation in Seattle public high schools.

    Science.gov (United States)

    Bompadre, Viviana; Jinguji, Thomas M; Yanez, N David; Satchell, Emma K; Gilbert, Kaiulani; Burton, Monique; Conrad, Ernest U; Herring, Stanley A

    2014-01-01

    The Lystedt law requires high school athletes who have sustained a concussion to be removed from practice and play and not to be allowed to return until cleared by a medical professional. To determine the effect of the Lystedt law on injury and concussion documentation in the Seattle public high schools. Cross-sectional study. Seattle public high schools. The numbers of students, aged 13 to 19 years in the 2008-2009, 2009-2010, and 2010-2011 school years, were 4348, 4925, and 4806, respectively. All injuries documented in SportsWare by athletic trainers in Seattle public high schools. We evaluated all injuries, including concussions recorded during the 2008-2009 school year, before the Lystedt law, and during the 2 school years after the law took effect (2009-2010 and 2010-2011). Incidence rates before and after the law were estimated and compared. The concussion rate was -1.09% in 2008-2009, 2.26% in 2009-2010, and 2.26% in 2010-2011. A comparison of relative risks showed that the incidence rates of concussions were different before and 1 year after the Lystedt law (relative risk = 2.10; 95% confidence interval [CI] = 1.50, 2.93) and 2 years after the law (relative risk = 2.10; 95% CI = 1.49, 2.93). Overall, the mean number of days out of play after 2008-2009 was almost 7 days greater after the law took effect (difference = 6.9 days; 95% CI = 0.70, 13.1). For females, the mean number of days out of play after 2008-2009 was more than 17 days in 2009-2010 (difference = 17.2 days; 95% CI = 4.81, 29.5) and was more than 6 days in 2010-2011 (difference = 6.3 days; 95% CI = 1.62, 11.0). The number of documented concussions more than doubled after the institution of the Lystedt law, which may be attributed to heightened awareness and closer monitoring.

  12. Overview of JT-60U results toward high integrated performance in reactor-relevant regime

    International Nuclear Information System (INIS)

    Fujita, T.

    2003-01-01

    Recent JT-60U results toward high integrated performance are reported with emphasis on the projection to the reactor-relevant regime. N-NB and EC power increased up to 6.2 MW and 3 MW, respectively. A high β p H-mode plasma with full non-inductive current drive has been obtained at 1.8 MA and the fusion triple product reached 3.1x10 20 m -3 keVs. High beta with β N =2.7 was maintained for 7.4 s. NTM suppression with EC was accomplished using a real-time feedback control system and improvement in β N was obtained. A stable existence of current hole was observed. High DT-equivalent fusion gain of 0.8 was maintained for 0.55 s in a plasma with a current hole. The current profile control in high bootstrap current reversed shear plasmas was demonstrated using N-NB and LH. A new operation scenario has been established in which a plasma with high bootstrap current fraction and ITBs is produced without the use of OH coil. ECCD study was undertaken in a reactor-relevant high T e regime. A new type of AE mode has been proposed and found to explain the observed frequency chirp quite well. High confinement reversed shear plasmas with T e >T i were obtained. Ar exhaust with EC heating was obtained in a high β p mode plasma. Impurity accumulation related to strong ITBs in a reversed shear plasma and degradation of ITB by ECH in a weak positive shear plasma have been found. Dedicated measurement of ELM dynamics and SOL plasma flow advanced the physics understanding. N-NB heating in an Ar-seed plasma extended the density region to 95% of Greenwald density with HH y2 =0.9. The enhancement of pedestal pressure was obtained with an increase of β p in a high triangularity configuration. (author)

  13. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 5

    International Nuclear Information System (INIS)

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 5) outlines the standards and requirements for the Fire Protection and Packaging and Transportation sections

  14. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 4

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 4) presents the standards and requirements for the following sections: Radiation Protection and Operations.

  15. High level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 6

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 6) outlines the standards and requirements for the sections on: Environmental Restoration and Waste Management, Research and Development and Experimental Activities, and Nuclear Safety.

  16. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Document (S/RID) is contained in multiple volumes. This document (Volume 2) presents the standards and requirements for the following sections: Quality Assurance, Training and Qualification, Emergency Planning and Preparedness, and Construction.

  17. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 2

    International Nuclear Information System (INIS)

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Document (S/RID) is contained in multiple volumes. This document (Volume 2) presents the standards and requirements for the following sections: Quality Assurance, Training and Qualification, Emergency Planning and Preparedness, and Construction

  18. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID)

    International Nuclear Information System (INIS)

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 3) presents the standards and requirements for the following sections: Safeguards and Security, Engineering Design, and Maintenance

  19. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID)

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 3) presents the standards and requirements for the following sections: Safeguards and Security, Engineering Design, and Maintenance.

  20. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 4

    International Nuclear Information System (INIS)

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 4) presents the standards and requirements for the following sections: Radiation Protection and Operations

  1. High level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 6

    International Nuclear Information System (INIS)

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 6) outlines the standards and requirements for the sections on: Environmental Restoration and Waste Management, Research and Development and Experimental Activities, and Nuclear Safety

  2. A two-sided academic landscape: snapshot of highly-cited documents in Google Scholar (1950-2013

    Directory of Open Access Journals (Sweden)

    Alberto Martín-Martín

    2016-12-01

    Full Text Available The main objective of this paper is to identify and define the core characteristics of the set of highly-cited documents in Google Scholar (document types, language, free availability, sources, and number of versions, on the hypothesis that the wide coverage of this search engine may provide a different portrait of these documents with respect to that offered by traditional bibliographic databases. To do this, a query per year was carried out from 1950 to 2013 identifying the top 1,000 documents retrieved from Google Scholar and obtaining a final sample of 64,000 documents, of which 40% provided a free link to full-text. The results obtained show that the average highly-cited document is a journal or book article (62% of the top 1% most cited documents of the sample, written in English (92.5% of all documents and available online in PDF format (86.0% of all documents. Yet, the existence of errors should be noted, especially when detecting duplicates and linking citations properly. Nonetheless, the fact that the study focused on highly cited papers minimizes the effects of these limitations. Given the high presence of books and, to a lesser extent, of other document types (such as proceedings or reports, the present research concludes that the Google Scholar data offer an original and different vision of the most influential academic documents (measured from the perspective of their citation count, a set composed not only of strictly scientific material (journal articles but also of academic material in its broadest sense.

  3. Documenting the use of expert scientific reasoning processes by high school physics students

    Directory of Open Access Journals (Sweden)

    A. Lynn Stephens

    2010-11-01

    Full Text Available We describe a methodology for identifying evidence for the use of three types of scientific reasoning. In two case studies of high school physics classes, we used this methodology to identify multiple instances of students using analogies, extreme cases, and Gedanken experiments. Previous case studies of expert scientists have indicated that these processes can be central during scientific model construction; here we code for their spontaneous use by students. We document evidence for numerous instances of these forms of reasoning in these classes. Most of these instances were associated with motion- and force-indicating depictive gestures, which we take as one kind of evidence for the use of animated mental imagery. Altogether, this methodology shows promise for use in highlighting the role of nonformal reasoning in student learning and for investigating the possible association of animated mental imagery with scientific reasoning processes.

  4. Feedback controlled, reactor relevant, high-density, high-confinement scenarios at ASDEX Upgrade

    Science.gov (United States)

    Lang, P. T.; Blanken, T. C.; Dunne, M.; McDermott, R. M.; Wolfrum, E.; Bobkov, V.; Felici, F.; Fischer, R.; Janky, F.; Kallenbach, A.; Kardaun, O.; Kudlacek, O.; Mertens, V.; Mlynek, A.; Ploeckl, B.; Stober, J. K.; Treutterer, W.; Zohm, H.; ASDEX Upgrade Team

    2018-03-01

    One main programme topic at the ASDEX Upgrade all-metal-wall tokamak is development of a high-density regime with central densities at reactor grade level while retaining high-confinement properties. This required development of appropriate control techniques capable of coping with the pellet tool, a powerful means of fuelling but one which presented challenges to the control system for handling of related perturbations. Real-time density profile control was demonstrated, raising the core density well above the Greenwald density while retaining the edge density in order to avoid confinement losses. Recently, a new model-based approach was implemented that allows direct control of the central density. Investigations focussed first on the N-seeding scenario owing to its proven potential to yield confinement enhancements. Combining pellets and N seeding was found to improve the divertor buffering further and enhance the operational range accessible. For core densities up to about the Greenwald density, a clear improvement with respect to the non-seeding reference was achieved; however, at higher densities this benefit is reduced. This behaviour is attributed to recurrence of an outward shift of the edge density profile, resulting in a reduced peeling-ballooning stability. This is similar to the shift seen during strong gas puffing, which is required to prevent impurity influx in ASDEX Upgrade. First tests indicate that highly-shaped plasma configurations like the ITER base-line scenario, respond very well to pellet injection, showing efficient fuelling with no measurable impact on the edge density profile.

  5. High heat flux tests at divertor relevant conditions on water-cooled swirl tube targets

    International Nuclear Information System (INIS)

    Schlosser, J.; Boscary, J.

    1994-01-01

    High heat flux experiments were performed to provide a technology for heat flux removal under NET/ITER relevant conditions. The water-cooled rectangular test sections were made of hardened copper with a stainless steel twisted tape installed inside a circular channel and one-side heated. The tests aimed to investigate the heat transfer and the critical heat flux in the subcooled boiling regime. A CHF data base of 63 values was established. Test results have shown the thermalhydraulic ability of swirl tubes to sustain an incident heat flux up to a 30 MW.m -2 range. (author) 10 refs.; 7 figs

  6. Documenting PyroCb Development on High-Intensity Boreal Fires: Implications for the Arctic Atmosphere

    Science.gov (United States)

    Stocks, B. J.; Fromm, M. D.; Servranckx, R.; Lindsey, D.

    2007-12-01

    The recent confirmation that smoke from high-intensity boreal forest fires can reach the Upper Troposphere/Lower Stratosphere (UTLS) through pyroconvection and be transported long distances has raised concern over the wider-scale environmental impact of boreal fire smoke. This concern is further elevated as climate change projections indicate a significant increase in the frequency and severity of boreal forest fires over the next century. Smoke in the UTLS is frequently transported to the Arctic and may have important implications for the radiative energy budget in the polar region. Soot deposition from fires may lead to enhanced melting of sea ice and glaciers, and the chemical impact of fire emissions at high altitudes is largely unknown. This knowledge gap will be addressed during the International Polar Year (IPY), as boreal fire emissions will be tracked and documented in detail through aerial, satellite and ground-based measurements, as a key component of the POLARCAT (Polar Study using Aircraft, Remote Sensing, Surface Measurements and Models, of Climate, Chemistry, Aerosols, and Transport) and ARCTAS (Arctic Research of the Composition of the Troposphere from Aircraft and Satellites) projects to be conducted in 2008. A large fire in the Canadian Northwest Territories burned throughout the month of June 2007, in a remote region where forest fires are not actively suppressed, eventually reaching 90,000 hectares in size. This fire was monitored for blowup one week in advance; it erupted into pyroconvection on June 25, 2007. We present an analysis of this event combining satellite data with ground-based measurements to document the development and impact of this classic pyroCb event. Under extreme fire danger conditions, the fire burned close to 20,000 hectares on that day. Fire behavior was consistent with predictions using the Canadian Fire Behavior Prediction System, with the fire spreading at 2.7 km/hr, consuming 33,000 kg of fuel hourly, generating an

  7. Overview of JT-60U results toward high integrated performance in reactor-relevant regime

    International Nuclear Information System (INIS)

    Fujita, T.

    2002-01-01

    Toward steady sustainment of high integrated performance, we have developed weak magnetic shear (high β p mode) and reversed magnetic shear plasmas. As a large-sized tokamak equipped with a variety of devices for heating, current drive and profile/shape control, JT-60U has high ability to approach the conditions required in reactors: low values of normalized Larmor radius and collisionality, high temperatures with T e > or approx. T i , etc. This paper reviews recent JT-60U results with the emphasis on the projection to the reactor-relevant regime. Full non-inductive current drive has been achieved in a 1.8 MA high β p H-mode plasma with β N 2:4, HH y2 =1.2 and high fusion triple product (3 x 10 20 m -3 keVs) owing to increased N-NB power. In a reversed shear plasma, HH y2 =1.4 at n e /n GW 0.8 under the full non-inductive current drive has been achieved with injection of LHRF and N-NB. In box-type ITBs with reversed shear, barriers for ions and electrons were sustained in a regime with T e > or approx. T i . The pedestal pressure was doubled with increased total poloidal beta in pellet-injected high triangularity plasmas with type I and II ELMs. Stable existence of current hole was demonstrated. (author)

  8. IRPhE-DRAGON-DPR, OECD High Temperature Reactor Dragon Project, Primary Documents

    International Nuclear Information System (INIS)

    2004-01-01

    Description: The DRAGON Reactor Experiment (DRE): The first demonstration High temperature gas reactor (HTGR) was built in the 1960's. Thirteen OECD countries began a project in 1959 to build an experimental reactor known as Dragon at Winfrith in the UK. The reactor - which operated successfully between 1966 and 1975 - had a thermal output of 20 MW and achieved a gas outlet temperature of 750 deg. C. The High Temperature Reactor concept, if it justified its expectations, was seen as having its place as an advanced thermal reactor between the current thermal reactor types such as the PWR, BWR, and AGR and the sodium cooled fast breeder reactor. It was expected that the HTR would offer better thermal efficiency, better uranium utilisation, either with low enriched uranium fuel or high enriched uranium thorium fuel, better inherent safety and lower unit power costs. In the event all these potential advantages were demonstrated to be in principle achievable. This view is still shared today. In fact Very High Temperature Reactors is one of the concepts retained for Generation IV. Projects on constructing Modular Pebble Bed Reactors are under way. Here all available Dragon Project Reports (DPR) - approximately 1000 - are collected in electronic form. An index points to the reports (PDF format); each table in the report is accessible in EXCEL format with the aim of facilitating access to the data. These reports describe the design, experiments and modelling carried out over a period of 17 years. 2 - Related or auxiliary information: IRPHE-HTR-ARCH-01, Archive of HTR Primary Documents NEA-1728/01. 3 - Software requirements: Acrobat Reader, Microsoft Word, HTML Browser required

  9. Impact relevance and usability of high resolution climate modeling and data

    Energy Technology Data Exchange (ETDEWEB)

    Arnott, James C. [Aspen Global Change Inst., Basalt, CO (United States)

    2016-10-30

    The Aspen Global Change Institute hosted a technical science workshop entitled, “Impact Relevance and Usability of High-Resolution Climate Modeling and Datasets,” on August 2-7, 2015 in Aspen, CO. Kate Calvin (Pacific Northwest National Laboratory), Andrew Jones (Lawrence Berkeley National Laboratory) and Jean-François Lamarque (NCAR) served as co-chairs for the workshop. The meeting included the participation of 29 scientists for a total of 145 participant days. Following the workshop, workshop co-chairs authored a meeting report published in Eos on April 27, 2016. Insights from the workshop directly contributed to the formation of a new DOE-supported project co-led by workshop co-chair Andy Jones. A subset of meeting participants continue to work on a publication on institutional innovations that can support the usability of high resolution modeling, among other sources of climate information.

  10. Functions and requirements document for interim store solidified high-level and transuranic waste

    Energy Technology Data Exchange (ETDEWEB)

    Smith-Fewell, M.A., Westinghouse Hanford

    1996-05-17

    The functions, requirements, interfaces, and architectures contained within the Functions and Requirements (F{ampersand}R) Document are based on the information currently contained within the TWRS Functions and Requirements database. The database also documents the set of technically defensible functions and requirements associated with the solidified waste interim storage mission.The F{ampersand}R Document provides a snapshot in time of the technical baseline for the project. The F{ampersand}R document is the product of functional analysis, requirements allocation and architectural structure definition. The technical baseline described in this document is traceable to the TWRS function 4.2.4.1, Interim Store Solidified Waste, and its related requirements, architecture, and interfaces.

  11. Creating a placental inflammatory composite index that has a high prognostic relevance to child morbidity.

    Science.gov (United States)

    Chen, Yan; Zou, Lile; Zhao, Yanjun; Wu, Ting; Ye, Jiangfeng; Zhang, Huijuan; Zhang, Jun

    2017-07-01

    Selecting pathologic measures of placental inflammation that affect pregnancy and childhood health is largely empirical. We aimed to systematically select several core inflammation-related placental measures to construct a novel placental inflammatory evaluation criterion with a high prognostic relevance to child morbidity. We used data from the US Collaborative Perinatal Project (1959-1976), a longitudinal birth cohort study that recruited women during pregnancy and followed the children until 7 years of age. Bootstrap resampling, least absolute shrinkage and selection operator, and receiver-operator curve were used to select placental pathologic measures that were closely related to child morbidity to form a placental inflammatory composite index. Twenty-six candidate placental inflammation-related measures were ranked based on their close association with adverse neonatal outcomes. The top five placental measures were: (i) neutrophilic infiltration in umbilical artery; (ii) placental weight-birthweight ratio; (iii) necrosis in decidua capsularis; (iv) bacterial colony in epithelium of amnion; and (v) opacity of membranes and fetal surface. Several composite indexes were constructed. A five-measure composite index that had the highest prognostic relevance was chosen. Compared with subjects without any of the five abnormal measures, those with any lesion ranging from 1 to 5 had a 1.2- to 4.6-fold risk of adverse child outcomes, respectively. Our composite index is simple, evidence-based, and has predictive value for child morbidity. It may be used as a novel placental inflammatory evaluation criterion. © 2017 Japan Society of Obstetrics and Gynecology.

  12. The Relevance of Vocational High School Curriculum with the Requirement of the Heavy Equipment Industries

    Science.gov (United States)

    Asfiyanur, E. P.; Sumardi, K.; Rahayu, Y.; Putra, R. C.

    2018-02-01

    This study aims to determine the relevance of competencies developed by vocational high schools with the needs of workers in the industrial world. This is to answer the statement from the world of industry that the competencies possessed by vocational secondary education graduates are not in accordance with industry standards. This research is a qualitative research conducted by collecting data, presenting accurate and objective information. Respondents of this research are industrial institutions in the field of heavy equipment, vocational education institutions and government agencies in charge of manpower. Selection of informants / sources of information used is purposive sample technique, which aims to give consideration to select informants who meet the criteria in providing accurate information. The results of this study provide insight and input to vocational secondary education managers about various information in developing vocational secondary education curriculum, major issues include curriculum content relevance, technological advances in the heavy equipment industry, updating of school facilities and collaboration between educational institutions and labor institutions and the industrial world in the development of vocational secondary education.

  13. Gas reactor and associated nuclear experience in the UK relevant to high temperature reactor engineering

    International Nuclear Information System (INIS)

    Beech, D.J.; May, R.

    2000-01-01

    In the UK, the NNC played a leading role in the design and build of all of the UK's commercial magnox reactors and advanced gas-cooled reactors (AGRs). It was also involved in the DRAGON project and was responsible for producing designs for large scale HTRs and other gas reactor designs employing helium and carbon dioxide coolants. This paper addresses the gas reactor experience and its relevance to the current HTR designs under development which use helium as the coolant, through the consideration of a representative sample of the issues addressed in the UK by the NNC in support of the AGR and other reactor programmes. Modern HTR designs provide unique engineering challenges. The success of the AGR design, reflected in the extended lifetimes agreed upon by the licensing authorities at many stations, indicates that these challenges can be successfully overcome. The UK experience is unique and provides substantial support to future gas reactor and high temperature engineering studies. (authors)

  14. High throughtput comparisons and profiling of metagenomes for industrially relevant enzymes

    KAUST Repository

    Alam, Intikhab

    2016-01-26

    More and more genomes and metagenomes are being sequenced since the advent of Next Generation Sequencing Technologies (NGS). Many metagenomic samples are collected from a variety of environments, each exhibiting a different environmental profile, e.g. temperature, environmental chemistry, etc… These metagenomes can be profiled to unearth enzymes relevant to several industries based on specific enzyme properties such as ability to work on extreme conditions, such as extreme temperatures, salinity, anaerobically, etc.. In this work, we present the DMAP platform comprising of a high-throughput metagenomic annotation pipeline and a data-warehouse for comparisons and profiling across large number of metagenomes. We developed two reference databases for profiling of important genes, one containing enzymes related to different industries and the other containing genes with potential bioactivity roles. In this presentation we describe an example analysis of a large number of publicly available metagenomic sample from TARA oceans study (Science 2015) that covers significant part of world oceans.

  15. The identification and inclusion of students with characteristics of high abilities/giftedness: relevant discussions

    Directory of Open Access Journals (Sweden)

    Tatiane Negrini

    2008-12-01

    Full Text Available Thinking about education in general and about the advances that have been coming up, brings us to reflect on the proposal of the inclusive school. The Brazilian educational policies point in this direction and new propositions appear to the school in order to understand how to make significant changes in the daily education. Accordingly, this article is to hold a discussion regarding the identification of students with high abilities/giftedness, articulating with some ideas proposed by the inclusive education. It is with that highlight the importance of identifying these students for a more genuine inclusion of these students in the educational context. In this sense, is used as input theoretical Gardner (1995, Renzulli (2004, Perez (2004, Virgolim (2007, Vieira (2005, among other authors who assist in the discussion of this issue. The considerations made about the high abilities and their process of identification highlight the importance of a great attention facing the process of identification and relevance of this to the actual inclusion of students with high skills in the educational context. Since they are not identified, these students may not be receiving the necessary guidance to learn and develop their potential, often distancing themselves from colleagues and friends. Thus, it is a debate about the appropriate identification of these students and how it can contribute to the inclusion of them.

  16. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 5

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Fire Protection functional area for the Hanford Site Tank Farm facilities and support structures is based on the application of relevant DOE orders, regulations, and industry codes and standards. The fire protection program defined in this document may be divided into three areas: (1) organizational, (2) administrative programmatic features, and (3) technical features. The information presented in each section is in the form of program elements and orders, regulations, industry codes, and standards that serve as the attributes of a fire protection program for the Tank Farm facilities. Upon completion this document will be utilized as the basis to evaluate compliance of the fire protection program being implemented for the Tank Farm facilities with the requirements of DOE orders and industry codes and standards.

  17. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 5

    International Nuclear Information System (INIS)

    1994-04-01

    The Fire Protection functional area for the Hanford Site Tank Farm facilities and support structures is based on the application of relevant DOE orders, regulations, and industry codes and standards. The fire protection program defined in this document may be divided into three areas: (1) organizational, (2) administrative programmatic features, and (3) technical features. The information presented in each section is in the form of program elements and orders, regulations, industry codes, and standards that serve as the attributes of a fire protection program for the Tank Farm facilities. Upon completion this document will be utilized as the basis to evaluate compliance of the fire protection program being implemented for the Tank Farm facilities with the requirements of DOE orders and industry codes and standards

  18. International safeguards relevant to geologic disposal of high-level wastes and spent fuels

    International Nuclear Information System (INIS)

    Pillay, K.K.S.; Picard, R.R.

    1989-01-01

    Spent fuels from once-through fuel cycles placed in underground repositories have the potential to become attractive targets for diversion and/or theft because of their valuable material content and decreasing radioactivity. The first geologic repository in the US, as currently designed, will contain approximately 500 Mt of plutonium, 60,000 Mt of uranium and a host of other fissile and strategically important elements. This paper identifies some of the international safeguards issues relevant to the various proposed scenarios for disposing of the spent fuel. In the context of the US program for geologic disposal of spent fuels, this paper highlights several issues that should be addressed in the near term by US industries, the Department of Energy, and the Nuclear Regulatory Commission before the geologic repositories for spent fuels become a reality. Based on US spent fuel discharges, an example is presented to illustrate the enormity of the problem of verifying spent fuel inventories. The geologic disposal scenario for high-level wastes originating from defense facilities produced a ''practicably irrecoverable'' waste form. Therefore, safeguards issues for geologic disposal of high-level waste now in the US are less pressing. 56 refs. , 2 figs

  19. Mining Very High Resolution INSAR Data Based On Complex-GMRF Cues And Relevance Feedback

    Science.gov (United States)

    Singh, Jagmal; Popescu, Anca; Soccorsi, Matteo; Datcu, Mihai

    2012-01-01

    With the increase in number of remote sensing satellites, the number of image-data scenes in our repositories is also increasing and a large quantity of these scenes are never received and used. Thus automatic retrieval of de- sired image-data using query by image content to fully utilize the huge repository volume is becoming of great interest. Generally different users are interested in scenes containing different kind of objects and structures. So its important to analyze all the image information mining (IIM) methods so that its easier for user to select a method depending upon his/her requirement. We concentrate our study only on high-resolution SAR images and we propose to use InSAR observations instead of only one single look complex (SLC) images for mining scenes containing coherent objects such as high-rise buildings. However in case of objects with less coherence like areas with vegetation cover, SLC images exhibits better performance. We demonstrate IIM performance comparison using complex-Gauss Markov Random Fields as texture descriptor for image patches and SVM relevance- feedback.

  20. EBIT spectroscopy of highly charged heavy ions relevant to hot plasmas

    Science.gov (United States)

    Nakamura, Nobuyuki

    2013-05-01

    An electron beam ion trap (EBIT) is a versatile device for studying highly charged ions. We have been using two types of EBITs for the spectroscopic studies of highly charged ions. One is a high-energy device called the Tokyo-EBIT, and another is a compact low-energy device called CoBIT. Complementary use of them enables us to obtain spectroscopic data for ions over a wide charge-state range interacting with electrons over a wide energy range. In this talk, we present EBIT spectra of highly charged ions for tungsten, iron, bismuth, etc., which are relevant to hot plasmas. Tungsten is considered to be the main impurity in the ITER (the next generation nuclear fusion reactor) plasma, and thus its emission lines are important for diagnosing and controlling the ITER plasma. We have observed many previously unreported lines to supply the lack of spectroscopic data of tungsten ions. Iron is one of the main components of the solar corona, and its spectra are used to diagnose temperature, density, etc. The diagnostics is usually done by comparing observed spectra with model calculations. An EBIT can provide spectra under a well-defined condition; they are thus useful to test the model calculations. Laser-produced bismuth plasma is one of the candidates for a soft x-ray source in the water window region. An EBIT has a narrow charge state distribution; it is thus useful to disentangle the spectra of laser-produced plasma containing ions with a wide charge-state range. Performed with the support and under the auspices of the NIFS Collaboration Research program (NIFS09KOAJ003) and JSPS KAKENHI Number 23246165, and partly supported by the JSPS-NRF-NSFC A3 Foresight Program in the field of Plasma Physics.

  1. Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 8. High Tech High School

    Science.gov (United States)

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  2. Delivery of completed irradiation vehicles and the quality assurance document to the High Flux Isotope Reactor for irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Petrie, Christian M. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); McDuffee, Joel Lee [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Katoh, Yutai [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Terrani, Kurt A. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

    2015-10-01

    This report details the initial fabrication and delivery of two Fuel Cycle Research and Development (FCRD) irradiation capsules (ATFSC01 and ATFSC02), with associated quality assurance documentation, to the High Flux Isotope Reactor (HFIR). The capsules and documentation were delivered by September 30, 2015, thus meeting the deadline for milestone M3FT-15OR0202268. These irradiation experiments are testing silicon carbide composite tubes in order to obtain experimental validation of thermo-mechanical models of stress states in SiC cladding irradiated under a prototypic high heat flux. This document contains a copy of the completed capsule fabrication request sheets, which detail all constituent components, pertinent drawings, etc., along with a detailed summary of the capsule assembly process performed by the Thermal Hydraulics and Irradiation Engineering Group (THIEG) in the Reactor and Nuclear Systems Division (RNSD). A complete fabrication package record is maintained by the THIEG and is available upon request.

  3. High throughtput comparisons and profiling of metagenomes for industrially relevant enzymes

    KAUST Repository

    Alam, Intikhab

    2016-01-01

    .g. temperature, environmental chemistry, etc… These metagenomes can be profiled to unearth enzymes relevant to several industries based on specific enzyme properties such as ability to work on extreme conditions, such as extreme temperatures, salinity

  4. A Full-Text-Based Search Engine for Finding Highly Matched Documents Across Multiple Categories

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.

    2016-01-01

    This report demonstrates the full-text-based search engine that works on any Web-based mobile application. The engine has the capability to search databases across multiple categories based on a user's queries and identify the most relevant or similar. The search results presented here were found using an Android (Google Co.) mobile device; however, it is also compatible with other mobile phones.

  5. Application of 3D documentation and geometric reconstruction methods in traffic accident analysis: with high resolution surface scanning, radiological MSCT/MRI scanning and real data based animation.

    Science.gov (United States)

    Buck, Ursula; Naether, Silvio; Braun, Marcel; Bolliger, Stephan; Friederich, Hans; Jackowski, Christian; Aghayev, Emin; Christe, Andreas; Vock, Peter; Dirnhofer, Richard; Thali, Michael J

    2007-07-20

    The examination of traffic accidents is daily routine in forensic medicine. An important question in the analysis of the victims of traffic accidents, for example in collisions between motor vehicles and pedestrians or cyclists, is the situation of the impact. Apart from forensic medical examinations (external examination and autopsy), three-dimensional technologies and methods are gaining importance in forensic investigations. Besides the post-mortem multi-slice computed tomography (MSCT) and magnetic resonance imaging (MRI) for the documentation and analysis of internal findings, highly precise 3D surface scanning is employed for the documentation of the external body findings and of injury-inflicting instruments. The correlation of injuries of the body to the injury-inflicting object and the accident mechanism are of great importance. The applied methods include documentation of the external and internal body and the involved vehicles and inflicting tools as well as the analysis of the acquired data. The body surface and the accident vehicles with their damages were digitized by 3D surface scanning. For the internal findings of the body, post-mortem MSCT and MRI were used. The analysis included the processing of the obtained data to 3D models, determination of the driving direction of the vehicle, correlation of injuries to the vehicle damages, geometric determination of the impact situation and evaluation of further findings of the accident. In the following article, the benefits of the 3D documentation and computer-assisted, drawn-to-scale 3D comparisons of the relevant injuries with the damages to the vehicle in the analysis of the course of accidents, especially with regard to the impact situation, are shown on two examined cases.

  6. Learning High-Order Filters for Efficient Blind Deconvolution of Document Photographs

    KAUST Repository

    Xiao, Lei; Wang, Jue; Heidrich, Wolfgang; Hirsch, Michael

    2016-01-01

    by small-scale high-order structures, we propose to learn a multi-scale, interleaved cascade of shrinkage fields model, which contains a series of high-order filters to facilitate joint recovery of blur kernel and latent image. With extensive experiments

  7. Electron attachment to oxygen, ozone and other compounds of atmospheric relevance as studied with ultra-high energy resolution

    International Nuclear Information System (INIS)

    Maerk, T.D.; Matejcik, S.; Kiendler, A.; Cicman, P.; Senn, G.; Skalny, J.; Stampfli, P.; Illenberger, E.; Chu, Y.; Stamatovic, A.

    1996-01-01

    The processes of electron attachment to oxygen, ozone, ozone/oxygen cluster and oxygen cluster as well as other compounds of atmospheric relevance (CF 2 Cl 2 , CHCl 3 and CCl 3 Br) were studied with ultra-high energy resolution crossed beam technique

  8. Experiencing Socially Relevant Applications in the High School Mathematics Curriculum: Students' Perspectives on Mathematics as a Tool for Social Inquiry

    Science.gov (United States)

    Brelias, Anastasia

    2009-01-01

    The purpose of this study was to examine the use of socially relevant mathematics applications in high school mathematics classrooms and students' views of mathematics in light of their experiences with these applications. Also, the study sought to determine whether inquiries afforded by these applications incorporated features that promoted…

  9. User perspectives on relevance criteria

    DEFF Research Database (Denmark)

    Maglaughlin, Kelly L.; Sonnenwald, Diane H.

    2002-01-01

    , partially relevant, or not relevant to their information need; and explained their decisions in an interview. Analysis revealed 29 criteria, discussed positively and negatively, that were used by the participants when selecting passages that contributed or detracted from a document's relevance......This study investigates the use of criteria to assess relevant, partially relevant, and not-relevant documents. Study participants identified passages within 20 document representations that they used to make relevance judgments; judged each document representation as a whole to be relevant...... matter, thought catalyst), full text (e.g., audience, novelty, type, possible content, utility), journal/publisher (e.g., novelty, main focus, perceived quality), and personal (e.g., competition, time requirements). Results further indicate that multiple criteria are used when making relevant, partially...

  10. High Energy LHC Document prepared for the European HEP strategy update

    CERN Document Server

    Brüning, O; Mangano, M; Myers, S; Rossi, L; Todesco, E; Zimmerman, F

    2012-01-01

    The LHC will run to produce physics at the energy frontier of 13-14 TeV c.o.m. for protons for the next 20-25 years. The possibility of increasing the proton beam energy well beyond its nominal value of 7 TeV has been addressed in a study group in 2010 and then discussed in a workshop in October 2010. The reuse of the CERN infrastructure, the “ease” in producing luminosity with proton circular collider and the practical and technical experience gained with LHC, all are concurring reasons to explore this route. The High Energy LHC relies on the “natural” evolution of the LHC technologies. The High Luminosity LHC (HL-LHC) demands going 50% beyond the limit of magnetic field of LHC: therefore HL-LHC can be considered as the first milestone in the path toward the highest energy. The beam energy is set by the strength of superconducting magnets: assuming a dipole field in the range 16-20 T, the maximum attainable collision energy falls in the range of 26 to 33 TeV in the centre of mass. The driving techno...

  11. Document retrieval on repetitive string collections.

    Science.gov (United States)

    Gagie, Travis; Hartikainen, Aleksi; Karhu, Kalle; Kärkkäinen, Juha; Navarro, Gonzalo; Puglisi, Simon J; Sirén, Jouni

    2017-01-01

    Most of the fastest-growing string collections today are repetitive, that is, most of the constituent documents are similar to many others. As these collections keep growing, a key approach to handling them is to exploit their repetitiveness, which can reduce their space usage by orders of magnitude. We study the problem of indexing repetitive string collections in order to perform efficient document retrieval operations on them. Document retrieval problems are routinely solved by search engines on large natural language collections, but the techniques are less developed on generic string collections. The case of repetitive string collections is even less understood, and there are very few existing solutions. We develop two novel ideas, interleaved LCPs and precomputed document lists , that yield highly compressed indexes solving the problem of document listing (find all the documents where a string appears), top- k document retrieval (find the k documents where a string appears most often), and document counting (count the number of documents where a string appears). We also show that a classical data structure supporting the latter query becomes highly compressible on repetitive data. Finally, we show how the tools we developed can be combined to solve ranked conjunctive and disjunctive multi-term queries under the simple [Formula: see text] model of relevance. We thoroughly evaluate the resulting techniques in various real-life repetitiveness scenarios, and recommend the best choices for each case.

  12. Recency or Relevance: A Quest for Pedagogical Framework in Teaching Philippine and World Literature in Senior High School

    Directory of Open Access Journals (Sweden)

    Richard M. Bañez

    2016-11-01

    Full Text Available Pedagogical questions on whether recency or relevance of literary texts, and the importance of generic academic over discipline-based learning objectives as the core of literature instruction are increasingly becoming the interest of debates in senior high school education. Hence, this study determined the degree of importance of literary instruction in preparation for college education and workplace challenges as assessed by 38 Grade 11 students at Malvar Senior High School, Philippines during the school year 2016-2017. By employing the survey type of descriptive research with a self-made questionnaire, it was found out that the respondents assessed both recency and relevance as important consideration in selecting literary texts. They also perceived that discipline-based/work-oriented learning objectives, especially those that focus on honing their human relation skills, were relevant in preparing themselves for college education and workplace responsibilities. Moreover, the respondents preferred language-based activities that tend to provide the former opportunities and develop other complex skills which are important in tertiary education and workplace challenges. With these, revitalizing the literature instruction in the senior high school is highly recommended in this study.

  13. Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 4. Boston Arts Academy

    Science.gov (United States)

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  14. Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 6. Perspectives Charter School

    Science.gov (United States)

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  15. High-flux He+ irradiation effects on surface damages of tungsten under ITER relevant conditions

    International Nuclear Information System (INIS)

    Liu, Lu; Liu, Dongping; Hong, Yi; Fan, Hongyu; Ni, Weiyuan; Yang, Qi; Bi, Zhenhua; Benstetter, Günther; Li, Shouzhe

    2016-01-01

    A large-power inductively coupled plasma source was designed to perform the continuous helium ions (He + ) irradiations of polycrystalline tungsten (W) under International Thermonuclear Experimental Reactor (ITER) relevant conditions. He + irradiations were performed at He + fluxes of 2.3 × 10 21 –1.6 × 10 22 /m 2  s and He + energies of 12–220 eV. Surface damages and microstructures of irradiated W were observed by scanning electron microscopy. This study showed the growth of nano-fuzzes with their lengths of 1.3–2.0 μm at He + energies of >70 eV or He + fluxes of >1.3 × 10 22 /m 2  s. Nanometer-sized defects or columnar microstructures were formed in W surface layer due to low-energy He + irradiations at an elevated temperature (>1300 K). The diffusion and coalescence of He atoms in W surface layers led to the growth and structures of nano-fuzzes. This study indicated that a reduction of He + energy below 12–30 eV may greatly decrease the surface damage of tungsten diverter in the fusion reactor.

  16. High-temperature Ionization-induced Synthesis of Biologically Relevant Molecules in the Protosolar Nebula

    Science.gov (United States)

    Bekaert, David V.; Derenne, Sylvie; Tissandier, Laurent; Marrocchi, Yves; Charnoz, Sebastien; Anquetil, Christelle; Marty, Bernard

    2018-06-01

    Biologically relevant molecules (hereafter biomolecules) have been commonly observed in extraterrestrial samples, but the mechanisms accounting for their synthesis in space are not well understood. While electron-driven production of organic solids from gas mixtures reminiscent of the photosphere of the protosolar nebula (PSN; i.e., dominated by CO–N2–H2) successfully reproduced key specific features of the chondritic insoluble organic matter (e.g., elementary and isotopic signatures of chondritic noble gases), the molecular diversity of organic materials has never been investigated. Here, we report that a large range of biomolecules detected in meteorites and comets can be synthesized under conditions typical of the irradiated gas phase of the PSN at temperatures = 800 K. Our results suggest that organic materials—including biomolecules—produced within the photosphere would have been widely dispersed in the protoplanetary disk through turbulent diffusion, providing a mechanism for the distribution of organic meteoritic precursors prior to any thermal/photoprocessing and subsequent modification by secondary parent body processes. Using a numerical model of dust transport in a turbulent disk, we propose that organic materials produced in the photosphere of the disk would likely be associated with small dust particles, which are coupled to the motion of gas within the disk and therefore preferentially lofted into the upper layers of the disk where organosynthesis occurs.

  17. Test of piezo-ceramic motor technology in ITER relevant high magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    Monti, Chiara, E-mail: chiara.monti@enea.it [Associazione EURATOM-ENEA sulla Fusione, via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Besi Vetrella, Ugo; Mugnaini, Giampiero; Neri, Carlo; Rossi, Paolo; Viola, Rosario [Associazione EURATOM-ENEA sulla Fusione, via Enrico Fermi 45, 00044 Frascati, Rome (Italy); Dubus, Gregory; Damiani, Carlo [Fusion for Energy, c/ Josep Pla, 2 Torres Diagonal Litoral, 08019 Barcelona (Spain)

    2014-10-15

    In the framework of a Fusion for Energy (F4E) grant, a test campaign started in 2012 in order to assess the performance of the in-vessel viewing system (IVVS) probe concept and to verify its compatibility when exposed to ITER typical working conditions. ENEA laboratories went through with several tests simulating high magnetic fields, high temperature, high vacuum, gamma radiation and neutron radiation. A customized motor has been adopted to study the performances of ultrasonic piezo motors technology in high magnetic field conditions. This paper reports on the testing activity performed on the motor in a multi Tesla magnetic field. The job was carried out in a test facility of ENEA laboratories able to achieve 14 T. A maximum field of 10 T, fully compliant with ITER requirements (8 T), was applied. A specific mechanical assembly has been designed and manufactured to hold the motor in the region with high homogeneity of the field. Results obtained so far indicate that the motor is compatible with high magnetic fields, and are presented in the paper.

  18. The GEKKO XII-HIPER (High Intensity Plasma Experimental Research) system relevant to ignition targets

    International Nuclear Information System (INIS)

    Miyanaga, N.; Nakatsuka, M.; Azechi, H.

    2001-01-01

    To test high gain targets surrogated in the planar geometry, we have constructed a new experimental system (HIPER) which provides the high ablation pressure with a uniform irradiance profile. These performances were achieved by bundling twelve beams of the existing GEKKO XII into a F/3 focus cone. The partially coherent light is introduced for the beam smoothing of a green foot pulse consisting of three beams, and the three-directional smoothing by spectral dispersion is utilized for residual nine beams delivering a blue main drive pulse. The detail of design concept and results of initial activation of this system are reported. (author)

  19. Finding and Visualizing Relevant Subspaces for Clustering High-Dimensional Astronomical Data Using Connected Morphological Operators

    NARCIS (Netherlands)

    Ferdosi, Bilkis J.; Buddelmeijer, Hugo; Trager, Scott; Wilkinson, Michael H.F.; Roerdink, Jos B.T.M.

    2010-01-01

    Data sets in astronomy are growing to enormous sizes. Modern astronomical surveys provide not only image data but also catalogues of millions of objects (stars, galaxies), each object with hundreds of associated parameters. Exploration of this very high-dimensional data space poses a huge challenge.

  20. Development of internal transport barrier scenarios at ITER-relevant high triangularity in JET

    International Nuclear Information System (INIS)

    Rimini, F.G.; Becoulet, M.; Giovannozzi, E.; Lomas, P.J.; Tudisco, O.; Alper, B.; Crisanti, F.; Baar, M. de; Luna, E. de La; Vries, P. de; Ekedahl, A.; Hawkes, N.; Huysmans, G.; Litaudon, X.; Parail, V.; Saibene, G.; Tuccillo, A.A.; Zastrow, K.D.

    2005-01-01

    The development of scenarios characterized by H-mode confinement and internal transport barriers (ITBs) in high triangularity, δ ∼ 0.4-0.5, discharges is of particular interest for ITER advanced tokamak operation. Previous JET experiments have shown that high triangularity favours H-modes which are ELM-free or develop type I edge localized mode (ELM) activity, which inhibits long lasting ITBs. The recent experiments reported here concentrate on integrated optimization of edge and core conditions. The stability of the edge pedestal was controlled using gas injection, deuterium or light impurities, and plasma current ramps. Both methods yield more ITB-friendly edge pedestal conditions, varying from small type I to type III ELMs and, in extreme cases, resulting in L-mode. In parallel, the conditions for triggering and sustaining ITBs encompassing a large proportion of the plasma volume (outer ITBs) were optimized, as opposed to less performing ITBs located closer to the plasma centre (inner ITB). These plasmas have deeply reversed target current profiles with q min ∼ 3 and a narrow inner ITB, located typically at a small normalized radius ρ E , at q 95 = 7.5, H 89 β N ∼ 3.5-4 and ∼60% of the Greenwald density limit. In summary, a high triangularity scenario has been developed, which combines the desirable characteristics of controlled edge, long lasting wide ITBs and high performance at density higher than the low triangularity JET scenarios

  1. Development of internal transport barrier scenarios at ITER-relevant high triangularity in Jet

    Energy Technology Data Exchange (ETDEWEB)

    Rimini, F.G.; Becoulet, M.; Ekedahl, A.; Huysmans, G.; Joffrin, E.; Litaudon, X. [Association Euratom-CEA, Centre d' Etudes de Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee; Giovannozzi, E.; Tudisco, O.; Crisanti, F. [Association Euratol/ENEA/CNR sulla Fusione, Frascali, Rome (Italy); Lomas, P.J.; Alper, B.; Hawkes, N.; Parail, V.; Zastrow, K.D. [Euratom/UKAEA Fusion Association, Culham Science Centre, Abingdon (United Kingdom); Baar, M. de; Vries, P. de [Association Euratom-Fom, TEC Cluster, Nieuwegein (Netherlands); La Luna, E. de [Association Euratom-Ciemat, Madrid (Spain); Saibene, G. [EFDA CSU, Garching (Germany)

    2004-07-01

    The development of ITB s(Internal Transport Barrier) scenarios in high triangularity discharges is of particular interest for ITER advanced tokamak operation. Previous JET experiments have shown that high triangularity favours ELM (Edge Localized Mode)-Free or type I ELMs, which inhibit long lasting ITBs. The recent experiments reported here concentrate on integrated optimisation of edge and core conditions. Edge pedestal was controlled using gas injection, Deuterium or light impurities, and plasma current ramps. Both methods yield more ITB-friendly edge pedestal conditions, varying from small type I to type III ELMs and, in extreme cases, to L-mode edge. In parallel, the conditions for triggering and sustaining a wide ITB were optimised. This plasmas have deeply reversed target current profiles with g{sub min} 3. A narrow inner ITB, located in the reversed shear region, is routinely observed. Large radius ITBs are only triggered when the input power exceeds 20-22 MW, but they do not usually survive the transition into H-mode. The best results, in terms of sustained high performance, have been obtained with Neon injection: a wide ITB is triggered during the phase with L-mode edge and survives into H-mode for about 2 s at H{sub 89}{beta}{sub N} {approx} 3.5 and {approx} 60% of the Greenwald density limit. In summary, a high triangularity scenario has been developed, which combines the desirable I characteristics of controlled edge, long lasting wide ITBs and high performance at density higher than the low triangularity JET scenarios. (authors)

  2. X ray and EUV spectroscopic measurements of highly charged tungsten ions relevant to fusion plasmas

    International Nuclear Information System (INIS)

    Radtke, R; Biedermann, C; Mandelbaum, P; Schwob, J L

    2007-01-01

    Using high-resolution x ray and extreme ultraviolet (EUV) spectrometry, the line emission of W 28+ - W 50+ ions was measured at the Berlin Electron Beam Ion Trap (EBIT). Our study encompasses a wide range of wavelengths (5-800 A) and includes the observation of electric and magnetic dipole lines. The results of our measurements are compared with predicted transition wavelengths from ab initioatomic structure calculations

  3. Heat transfer for falling film evaporation of industrially relevant fluids up to very high Prandtl numbers

    Science.gov (United States)

    Gourdon, Mathias; Karlsson, Erik; Innings, Fredrik; Jongsma, Alfred; Vamling, Lennart

    2016-02-01

    In many industrial applications, falling film evaporation is an attractive technique for solvent removal due to high heat transfer and low residence times. Examples are the powder production in the dairy industry and in kraft pulp production process to remove water from so called black liquor. Common for both applications is that the fluids exhibit high viscosities in industrial practice. In this paper, results from experimental studies on both black liquor and a dairy product are reported for Prandtl numbers up to 800. The results are compared with several existing correlation in literature, and the need for a modified correlation is recognized especially to cover higher Prandtl-numbers. The following correlation for the turbulent flow region with 3 < Pr < 800 was derived from the data: {Nu}t = 0.0085 \\cdot Re^{0.2} \\cdot {Pr^{0.65}} The correlation has been compared to literature data from one additional study on two other fluids (propylene glycol and cyclohexanol) with fairly high Prandtl-numbers, from 40 to 58 and from 45 to 155 respectively and the agreement was within ±40 %.

  4. Planned upgrade to the coaxial plasma source facility for high heat flux plasma flows relevant to tokamak disruption simulations

    International Nuclear Information System (INIS)

    Caress, R.W.; Mayo, R.M.; Carter, T.A.

    1995-01-01

    Plasma disruptions in tokamaks remain serious obstacles to the demonstration of economical fusion power. In disruption simulation experiments, some important effects have not been taken into account. Present disruption simulation experimental data do not include effects of the high magnetic fields expected near the PFCs in a tokamak major disruption. In addition, temporal and spatial scales are much too short in present simulation devices to be of direct relevance to tokamak disruptions. To address some of these inadequacies, an experimental program is planned at North Carolina State University employing an upgrade to the Coaxial Plasma Source (CPS-1) magnetized coaxial plasma gun facility. The advantages of the CPS-1 plasma source over present disruption simulation devices include the ability to irradiate large material samples at extremely high areal energy densities, and the ability to perform these material studies in the presence of a high magnetic field. Other tokamak disruption relevant features of CPS-1U include a high ion temperature, high electron temperature, and long pulse length

  5. Standardization Documents

    Science.gov (United States)

    2011-08-01

    Specifications and Standards; Guide Specifications; CIDs; and NGSs . Learn. Perform. Succeed. STANDARDIZATION DOCUMENTS Federal Specifications Commercial...national or international standardization document developed by a private sector association, organization, or technical society that plans ...Maintain lessons learned • Examples: Guidance for application of a technology; Lists of options Learn. Perform. Succeed. DEFENSE HANDBOOK

  6. Highly selective deuteration of pharmaceutically relevant nitrogen-containing heterocycles: a flow chemistry approach.

    Science.gov (United States)

    Ötvös, Sándor B; Mándity, István M; Fülöp, Ferenc

    2011-08-01

    A simple and efficient flow-based technique is reported for the catalytic deuteration of several model nitrogen-containing heterocyclic compounds which are important building blocks of pharmacologically active materials. A continuous flow reactor was used in combination with on-demand pressure-controlled electrolytic D(2) production. The D(2) source was D(2)O, the consumption of which was very low. The experimental set-up allows the fine-tuning of pressure, temperature, and flow rate so as to determine the optimal conditions for the deuteration reactions. The described procedure lacks most of the drawbacks of the conventional batch deuteration techniques, and additionally is highly selective and reproducible.

  7. Enhanced Field Emission Studies on Niobium Surfaces Relevant to High Field Superconducting Radio-Frequency Devices

    International Nuclear Information System (INIS)

    Tong Wang

    2002-01-01

    Enhanced field emission (EFE) presents the main impediment to higher acceleration gradients in superconducting niobium (Nb) radio frequency cavities for particle accelerators. The strength, number and sources of EFE sites strongly depend on surface preparation and handling. The main objective of this thesis project is to systematically investigate the sources of EFE from Nb, to evaluate the best available surface preparation techniques with respect to resulting field emission, and to establish an optimized process to minimize or eliminate EFE. To achieve these goals, a scanning field emission microscope (SFEM) was designed and built as an extension to an existing commercial scanning electron microscope (SEM). In the SFEM chamber of ultra high vacuum, a sample is moved laterally in a raster pattern under a high voltage anode tip for EFE detection and localization. The sample is then transferred under vacuum to the SEM chamber equipped with an energy-dispersive x-ray spectrometer for individual emitting site characterization. Compared to other systems built for similar purposes, this apparatus has low cost and maintenance, high operational flexibility, considerably bigger scan area, as well as reliable performance. EFE sources from planar Nb have been studied after various surface preparation, including chemical etching and electropolishing, combined with ultrasonic or high-pressure water rinse. Emitters have been identified, analyzed and the preparation process has been examined and improved based on EFE results. As a result, field-emission-free or near field-emission-free surfaces at ∼140 MV/m have been consistently achieved with the above techniques. Characterization on the remaining emitters leads to the conclusion that no evidence of intrinsic emitters, i.e., no fundamental electric field limit induced by EFE, has been observed up to ∼140 MV/m. Chemically etched and electropolished Nb are compared and no significant difference is observed up to ∼140 MV

  8. Enhanced Field Emission Studies on Niobium Surfaces Relevant to High Field Superconducting Radio-Frequency Devices

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Tong [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2002-09-18

    Enhanced field emission (EFE) presents the main impediment to higher acceleration gradients in superconducting niobium (Nb) radiofrequency cavities for particle accelerators. The strength, number and sources of EFE sites strongly depend on surface preparation and handling. The main objective of this thesis project is to systematically investigate the sources of EFE from Nb, to evaluate the best available surface preparation techniques with respect to resulting field emission, and to establish an optimized process to minimize or eliminate EFE. To achieve these goals, a scanning field emission microscope (SFEM) was designed and built as an extension to an existing commercial scanning electron microscope (SEM). In the SFEM chamber of ultra high vacuum, a sample is moved laterally in a raster pattern under a high voltage anode tip for EFE detection and localization. The sample is then transferred under vacuum to the SEM chamber equipped with an energy-dispersive x-ray spectrometer for individual emitting site characterization. Compared to other systems built for similar purposes, this apparatus has low cost and maintenance, high operational flexibility, considerably bigger scan area, as well as reliable performance. EFE sources from planar Nb have been studied after various surface preparation, including chemical etching and electropolishing, combined with ultrasonic or high-pressure water rinse. Emitters have been identified, analyzed and the preparation process has been examined and improved based on EFE results. As a result, field-emission-free or near field-emission-free surfaces at ~140 MV/m have been consistently achieved with the above techniques. Characterization on the remaining emitters leads to the conclusion that no evidence of intrinsic emitters, i.e., no fundamental electric field limit induced by EFE, has been observed up to ~140 MV/m. Chemically etched and electropolished Nb are compared and no significant difference is observed up to ~140 MV/m. To

  9. Generation of high pressure shocks relevant to the shock-ignition intensity regime

    Czech Academy of Sciences Publication Activity Database

    Batani, D.; Antonelli, L.; Atzeni, S.; Badziak, J.; Baffigi, F.; Chodukowski, T.; Consoli, F.; Cristoforetti, G.; De Angelis, R.; Dudžák, Roman; Folpini, G.; Giuffrida, L.; Gizzi, L.A.; Kalinowska, Z.; Koester, P.; Krouský, Eduard; Krůs, Miroslav; Labate, L.; Levato, Tadzio; Maheut, Y.; Malka, G.; Margarone, Daniele; Marocchino, A.; Nejdl, Jaroslav; Nicolai, Ph.; O’Dell, T.; Pisarczyk, T.; Renner, Oldřich; Rhee, Y.-J.; Ribeyre, X.; Richetta, M.; Rosinski, M.; Sawicka, Magdalena; Schiavi, A.; Skála, Jiří; Šmíd, Michal; Spindloe, Ch.; Ullschmied, Jiří; Velyhan, Andriy; Vinci, T.

    2014-01-01

    Roč. 21, č. 3 (2014), 032710-032710 ISSN 1070-664X R&D Projects: GA MŠk(CZ) LC528; GA MŠk LM2010014 Institutional support: RVO:61389021 ; RVO:68378271 Keywords : High-pressure shocks * shock ignition * inertial confinement fusion * PALS laser Subject RIV: BL - Plasma and Gas Discharge Physics; BL - Plasma and Gas Discharge Physics (FZU-D) Impact factor: 2.142, year: 2014 http://dx.doi.org/10.1063/1.4869715

  10. Forensic Analysis of Blue Ball point Pen Inks on Questioned Documents by High Performance Thin Layer Chromatography Technique (HPTLC)

    International Nuclear Information System (INIS)

    Lee, L.C.; Siti Mariam Nunurung; Abdul Aziz Ishak

    2014-01-01

    Nowadays, crimes related to forged documents are increasing. Any erasure, addition or modification in the document content always involves the use of writing instrument such as ball point pens. Hence, there is an evident need to develop a fast and accurate ink analysis protocol to solve this problem. This study is aimed to determine the discrimination power of high performance thin layer chromatography (HPTLC) technique for analyzing a set of blue ball point pen inks. Ink samples deposited on paper were extracted using methanol and separated via a solvent mixture of ethyl acetate, methanol and distilled water (70: 35: 30, v/ v/ v). In this method, the discrimination power of 89.40 % was achieved, which confirm that the proposed method was able to differentiate a significant number of pen-pair samples. In addition, composition of blue pen inks was found to be homogeneous (RSD < 2.5 %) and the proposed method showed good repeatability and reproducibility (RSD < 3. 0%). As a conclusion, HPTLC is an effective tool to separate blue ball point pen inks. (author)

  11. Assessing the Behavior of Typically Lithophile Elements Under Highly Reducing Conditions Relevant to the Planet Mercury

    Science.gov (United States)

    Rowland, Rick, II; Vander Kaaden, Kathleen E.; McCubbin, Francis M.; Danielson, Lisa R.

    2017-01-01

    With the data returned from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission, there are now numerous constraints on the physical and chemical properties of Mercury, including its surface composition. The high Sand low FeO contents observed from MESSENGER suggest a low oxygen fugacity of the present materials on the planet's surface. Most of our understanding of elemental partitioning behavior comes from observations made on terrestrial rocks, but Mercury's oxygen fugacity is far outside the conditions of those samples, estimated at approximately 3-7 log units below the Iron-Wtistite (lW) oxygen buffer, several orders of magnitude more reducing than other terrestrial bodies we have data from. With limited oxygen available, lithophile elements may instead exhibit chalcophile, halophile, or siderophile behaviors. Furthermore, very few natural samples of rocks that formed under reducing conditions (e.g., enstatite chondrites, achondrites, aubrites) are available in our collections for examination of this change in geochemical affinity. Our goal is to determine the elemental partitioning behavior of typically lithophile elements at lower oxygen fugacity as a function of temperature and pressure. Experiments were conducted at I GPa in a 13 mm QUICKpress piston cylinder and at 4 GPa in an 880-ton multianvil press, at temperatures up to 1850degC. The composition of starting materials for the experiments were designed so the final run products contained metal, silicate melt, and sulfide melt phases. Oxygen fugacity was controlled in the experiments by adding silicon metal to the samples, in order to utilize the Si-Si02 buffer, which is approximately 5 log units more reducing than the IW buffer at our temperatures of interest. The target silicate melt composition was diopside (CaMgSi206) because measured surface compositions indicate partial melting of a pyroxene-rich mantle. The results of our experiments will aid in our understanding of

  12. The relevance of goal-orientation for motivation in high versus low proneness to negative symptoms.

    Science.gov (United States)

    Schlier, Björn; Engel, Maike; Fladung, Anne-Katharina; Fritzsche, Anja; Lincoln, Tania M

    2017-06-01

    The psychological mechanisms of why individuals with negative symptoms fail to initiate and perform goal-directed behavior are not well understood. Drawing on the reward-sensitivity and expectancy-value theories, we investigate whether negative symptom-like experiences (NSLE) are associated with generating less approach goals (aimed at reaching a positive outcome) and more avoidance goals (aimed at avoiding a negative outcome) and whether this type of goal-orientation explains motivational deficits (i.e., perceiving goals as less feasible and important and being less committed to them). Based on the continuum model of negative symptoms, we identified two parallelized extreme groups with high and low levels of NSLE (n = 37, respectively) in an ad-hoc online-sample of healthy individuals (N = 262) using the Community Assessment of Psychic Experiences. In an online study, these participants were instructed to generate approach and avoidance goals and to rate each goal in terms of feasibility, importance and goal-commitment. Participants with low levels of NSLE generated more approach than avoidance goals. Participants with high levels of NSLE showed no such difference due to increased numbers of avoidance goals. Furthermore, avoidance goal-orientation predicted reduced subjective feasibility and importance of goals and less goal-commitment. Results are based on a healthy sample rather than people with psychosis. No longitudinal or behavioral data for goal-striving was collected. People with NSLE generate more avoidance goals than controls. This is dysfunctional because it correlates with feeling less committed to reach one's goals. Optimizing goal-setting could be a promising starting-point for psychological interventions aimed at reducing negative symptoms. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 7. Revision 1

    International Nuclear Information System (INIS)

    Burt, D.L.

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 7) presents the standards and requirements for the following sections: Occupational Safety and Health, and Environmental Protection

  14. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 7. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Burt, D.L.

    1994-04-01

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 7) presents the standards and requirements for the following sections: Occupational Safety and Health, and Environmental Protection.

  15. Demonstration of high current carbon nanotube enabled vertical organic field effect transistors at industrially relevant voltages

    Science.gov (United States)

    McCarthy, Mitchell

    The display market is presently dominated by the active matrix liquid crystal display (LCD). However, the active matrix organic light emitting diode (AMOLED) display is argued to become the successor to the LCD, and is already beginning its way into the market, mainly in small size displays. But, for AMOLED technology to become comparable in market share to LCD, larger size displays must become available at a competitive price with their LCD counterparts. A major issue preventing low-cost large AMOLED displays is the thin-film transistor (TFT) technology. Unlike the voltage driven LCD, the OLEDs in the AMOLED display are current driven. Because of this, the mature amorphous silicon TFT backplane technology used in the LCD must be upgraded to a material possessing a higher mobility. Polycrystalline silicon and transparent oxide TFT technologies are being considered to fill this need. But these technologies bring with them significant manufacturing complexity and cost concerns. Carbon nanotube enabled vertical organic field effect transistors (CN-VFETs) offer a unique solution to this problem (now known as the AMOLED backplane problem). The CN-VFET allows the use of organic semiconductors to be used for the semiconductor layer. Organics are known for their low-cost large area processing compatibility. Although the mobility of the best organics is only comparable to that of amorphous silicon, the CN-VFET makes up for this by orienting the channel vertically, as opposed to horizontally (like in conventional TFTs). This allows the CN-VFET to achieve sub-micron channel lengths without expensive high resolution patterning. Additionally, because the CN-VFET can be easily converted into a light emitting transistor (called the carbon nanotube enabled vertical organic light emitting transistor---CN-VOLET) by essentially stacking an OLED on top of the CN-VFET, more potential benefits can be realized. These potential benefits include, increased aperture ratio, increased OLED

  16. Assessing the Behavior of Typically Lithophile Elements Under Highly Reducing Conditions Relevant to the Planet Mercury

    Science.gov (United States)

    Rowland, R. L., II; Vander Kaaden, K. E.; McCubbin, F. M.; Danielson, L. R.

    2017-12-01

    With the data returned from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission, there are now numerous constraints on the physical and chemical properties of Mercury, including its surface composition. The high S and low FeO contents observed from MESSENGER suggest a low oxygen fugacity of the present materials on the planet's surface. Most of our understanding of elemental partitioning behavior comes from observations made on terrestrial rocks, but Mercury's oxygen fugacity is far outside the conditions of those samples, estimated at approximately 3-7 log units below the Iron-Wüstite (IW) oxygen buffer, several orders of magnitude more reducing than other terrestrial bodies we have data from. With limited oxygen available, lithophile elements may instead exhibit chalcophile, halophile, or siderophile behaviors. Furthermore, very few natural samples of rocks that formed under reducing conditions (e.g., enstatite chondrites, achondrites, aubrites) are available in our collections for examination of this change in geochemical affinity. Our goal is to determine the elemental partitioning behavior of typically lithophile elements at lower oxygen fugacity as a function of temperature and pressure. Experiments were conducted at 1 GPa in a 13 mm QUICKpress piston cylinder and at 4 GPa in an 880-ton multi-anvil press, at temperatures up to 1850°C. The composition of starting materials for the experiments were designed so the final run products contained metal, silicate melt, and sulfide melt phases. Oxygen fugacity was controlled in the experiments by adding silicon metal to the samples, in order to utilize the Si-SiO2 buffer, which is 5 log units more reducing than the IW buffer at our temperatures of interest. The target silicate melt composition was diopside (CaMgSi2O6) because measured surface compositions indicate partial melting of a pyroxene-rich mantle. The results of our experiments will aid in our understanding of the fate of

  17. Proposed high voltage power supply for the ITER relevant lower hybrid current drive system

    International Nuclear Information System (INIS)

    Sharma, P.K.; Kazarian, F.; Garibaldi, P.; Gassman, T.; Artaud, J.F.; Bae, Y.S.; Belo, J.; Berger-By, G.; Bernard, J.M.; Cara, Ph.; Cardinali, A.; Castaldo, C.; Ceccuzzi, S.; Cesario, R.; Decker, J.; Delpech, L.; Ekedahl, A.; Garcia, J.; Goniche, M.; Guilhem, D.

    2011-01-01

    In the framework of the EFDA task HCD-08-03-01, the ITER lower hybrid current drive (LHCD) system design has been reviewed. The system aims to generate 24 MW of RF power at 5 GHz, of which 20 MW would be coupled to the plasmas. The present state of the art does not allow envisaging a unitary output of the klystrons exceeding 500 kW, so the project is based on 48 klystron units, leaving some margin when the transmission lines losses are taken into account. A high voltage power supply (HVPS), required to operate the klystrons, is proposed. A single HVPS would be used to feed and operate four klystrons in parallel configuration. Based on the above considerations, it is proposed to design and develop twelve HVPS, based on pulse step modulator (PSM) technology, each rated for 90 kV/90 A. This paper describes in details, the typical electrical requirements and the conceptual design of the proposed HVPS for the ITER LHCD system.

  18. Old but Still Relevant: High Resolution Electrophoresis and Immunofixation in Multiple Myeloma.

    Science.gov (United States)

    Misra, Aroonima; Mishra, Jyoti; Chandramohan, Jagan; Sharma, Atul; Raina, Vinod; Kumar, Rajive; Soni, Sushant; Chopra, Anita

    2016-03-01

    High resolution electrophoresis (HRE) and immunofixation (IFX) of serum and urine are integral to the diagnostic work-up of multiple myeloma. Unusual electrophoresis patterns are common and may be misinterpreted. Though primarily the responsibility of the hematopathologist, clinicians who are responsible for managing myelomas may benefit from knowledge of these. In this review article we intend to discuss the patterns and importance of electrophoresis in present day scenario. Patterns of HRE and IFX seen in our laboratory over the past 15 years were studied. Monoclonal proteins are seen on HRE as sharply defined bands, sometimes two, lying from γ- to α-globulin regions on a background of normal, increased or decreased polyclonal γ-globulins, showing HRE to be a rapid and dependable method of detecting M-protein in serum or urine. Immunofixation complements HRE and due to its greater sensitivity, is able to pick up small or light chain bands, not apparent on electrophoresis, including biclonal disease even when electrophoresis shows only one M-band. Special features liable to misinterpretation are discussed. Familiarity with the interpretation of the varied patterns seen in health and disease is essential for providing dependable laboratory support in the management of multiple myeloma.

  19. Potential of garlic (Allium sativum in lowering high blood pressure: mechanisms of action and clinical relevance

    Directory of Open Access Journals (Sweden)

    Ried K

    2014-12-01

    Full Text Available Karin Ried, Peter Fakler National Institute of Integrative Medicine, Melbourne, VIC, Australia Abstract: Garlic supplements have shown promise in the treatment of uncontrolled hypertension, lowering blood pressure (BP by about 10 mmHg systolic and 8 mmHg diastolic, similar to standard BP medication. Aged garlic extract, which contains S-allylcysteine as the bioactive sulfur compound, in particular is standardizable and highly tolerable, with little or no known harmful interaction when taken with other BP-reducing or blood-thinning medication. Here we describe biologically plausible mechanisms of garlic's BP-lowering effect. Garlic-derived polysulfides stimulate the production of the vascular gasotransmitter hydrogen sulfide (H2S and enhance the regulation of endothelial nitric oxide (NO, which induce smooth muscle cell relaxation, vasodilation, and BP reduction. Several dietary and genetic factors influence the efficiency of the H2S and NO signaling pathways and may contribute to the development of hypertension. Sulfur deficiency might play a part in the etiology of hypertension, and could be alleviated with supplementation of organosulfur compounds derived from garlic. Keywords: garlic, S-allylcysteine, hydrogen sulfide (H2S, nitric oxide (NO, redox signaling, hypertension

  20. Reduced nighttime transpiration is a relevant breeding target for high water-use efficiency in grapevine.

    Science.gov (United States)

    Coupel-Ledru, Aude; Lebon, Eric; Christophe, Angélique; Gallo, Agustina; Gago, Pilar; Pantin, Florent; Doligez, Agnès; Simonneau, Thierry

    2016-08-09

    Increasing water scarcity challenges crop sustainability in many regions. As a consequence, the enhancement of transpiration efficiency (TE)-that is, the biomass produced per unit of water transpired-has become crucial in breeding programs. This could be achieved by reducing plant transpiration through a better closure of the stomatal pores at the leaf surface. However, this strategy generally also lowers growth, as stomatal opening is necessary for the capture of atmospheric CO2 that feeds daytime photosynthesis. Here, we considered the reduction in transpiration rate at night (En) as a possible strategy to limit water use without altering growth. For this purpose, we carried out a genetic analysis for En and TE in grapevine, a major crop in drought-prone areas. Using recently developed phenotyping facilities, potted plants of a cross between Syrah and Grenache cultivars were screened for 2 y under well-watered and moderate soil water deficit scenarios. High genetic variability was found for En under both scenarios and was primarily associated with residual diffusion through the stomata. Five quantitative trait loci (QTLs) were detected that underlay genetic variability in En Interestingly, four of them colocalized with QTLs for TE. Moreover, genotypes with favorable alleles on these common QTLs exhibited reduced En without altered growth. These results demonstrate the interest of breeding grapevine for lower water loss at night and pave the way to breeding other crops with this underexploited trait for higher TE.

  1. Slide-away distributions and relevant collective modes in high-temperature plasmas

    International Nuclear Information System (INIS)

    Coppi, B.; Pegoraro, F.; Pozzoli, R.; Rewoldt, G.

    1976-01-01

    The evolution of the electron distribution function, when an electric field that is not too small in comparison with the critical electron runaway field is applied along the confining magnetic field of a high temperature plasma, is analysed. In the regimes considered, a finite fraction of the electron population has magnetically trapped orbits, and is not appreciably affected by the applied electric field, while the distribution of circulating electrons tends to ''slide away'' as a whole. Then the Spitzer-Haerm model for the current-carrying electron distribution is inadequate, and the role that collective modes, in particular current-driven microinstabilities, and collisions can play in producing a stationary electron distribution is analysed. Modes at the ion plasma frequency, ωsub(pi), that are driven by the positive slope of the current-carrying electron distribution, can be excited, when the average electron drift velocity is a finite fraction of the electron thermal velocity, and transfer transverse energy to the main body of the electron distribution. These features are consistent with the experimental observations performed on the Alcator device. Modes at the ''reduced'' electron plasma frequency (ksub(parallel)/k)ωsub(pe) can also be excited both in connection with the modes at wsub(pi) and independently. Modes at the electron gyrofrequency Ωsub(e) associated with the loss-cone feature that the electron distribution tends to develop are considered, among others, as a factor for the strongly enhanced electron cyclotron emission experimentally observed in regimes where non-thermal electron distributions have been realized. (author)

  2. Diagnostic relevance of high field MRI in clinical neuroradiology: the advantages and challenges of driving a sports car

    International Nuclear Information System (INIS)

    Wattjes, Mike P.; Barkhof, Frederik

    2012-01-01

    High field MRI operating at 3 T is increasingly being used in the field of neuroradiology on the grounds that higher magnetic field strength should theoretically lead to a higher diagnostic accuracy in the diagnosis of several disease entities. This Editorial discusses the exhaustive review by Wardlaw and colleagues of research comparing 3 T MRI with 1.5 T MRI in the field of neuroradiology. Interestingly, the authors found no convincing evidence of improved image quality, diagnostic accuracy, or reduced total examination times using 3 T MRI instead of 1.5 T MRI. These findings are highly relevant since a new generation of high field MRI systems operating at 7 T has recently been introduced. (orig.)

  3. Maury Documentation

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Supporting documentation for the Maury Collection of marine observations. Includes explanations from Maury himself, as well as guides and descriptions by the U.S....

  4. Documentation Service

    International Nuclear Information System (INIS)

    Charnay, J.; Chosson, L.; Croize, M.; Ducloux, A.; Flores, S.; Jarroux, D.; Melka, J.; Morgue, D.; Mottin, C.

    1998-01-01

    This service assures the treatment and diffusion of the scientific information and the management of the scientific production of the institute as well as the secretariat operation for the groups and services of the institute. The report on documentation-library section mentions: the management of the documentation funds, search in international databases (INIS, Current Contents, Inspects), Pret-Inter service which allows accessing documents through DEMOCRITE network of IN2P3. As realizations also mentioned are: the setup of a video, photo database, the Web home page of the institute's library, follow-up of digitizing the document funds by integrating the CD-ROMs and diskettes, electronic archiving of the scientific production, etc

  5. Computerising documentation

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The nuclear power generation industry is faced with public concern and government pressures over safety, efficiency and risk. Operators throughout the industry are addressing these issues with the aid of a new technology - technical document management systems (TDMS). Used for strategic and tactical advantage, the systems enable users to scan, archive, retrieve, store, edit, distribute worldwide and manage the huge volume of documentation (paper drawings, CAD data and film-based information) generated in building, maintaining and ensuring safety in the UK's power plants. The power generation industry has recognized that the management and modification of operation critical information is vital to the safety and efficiency of its power plants. Regulatory pressure from the Nuclear Installations Inspectorate (NII) to operate within strict safety margins or lose Site Licences has prompted the need for accurate, up-to-data documentation. A document capture and management retrieval system provides a powerful cost-effective solution, giving rapid access to documentation in a tightly controlled environment. The computerisation of documents and plans is discussed in this article. (Author)

  6. Forensic document analysis using scanning microscopy

    Science.gov (United States)

    Shaffer, Douglas K.

    2009-05-01

    The authentication and identification of the source of a printed document(s) can be important in forensic investigations involving a wide range of fraudulent materials, including counterfeit currency, travel and identity documents, business and personal checks, money orders, prescription labels, travelers checks, medical records, financial documents and threatening correspondence. The physical and chemical characterization of document materials - including paper, writing inks and printed media - is becoming increasingly relevant for law enforcement agencies, with the availability of a wide variety of sophisticated commercial printers and copiers which are capable of producing fraudulent documents of extremely high print quality, rendering these difficult to distinguish from genuine documents. This paper describes various applications and analytical methodologies using scanning electron miscoscopy/energy dispersive (x-ray) spectroscopy (SEM/EDS) and related technologies for the characterization of fraudulent documents, and illustrates how their morphological and chemical profiles can be compared to (1) authenticate and (2) link forensic documents with a common source(s) in their production history.

  7. Remote Methodology used at B Plant Hanford to Map High Radiation and Contamination Fields and Document Remaining Hazards

    Energy Technology Data Exchange (ETDEWEB)

    SIMMONS, F.M.

    2000-01-01

    A remote radiation mapping system using the Gammacam{trademark} (AIL Systems Inc. Trademark) with real-time response was used in deactivating the B Plant at Hanford to produce digitized images showing actual radiation fields and dose rates. Deployment of this technology has significantly reduced labor requirements, decreased personnel exposure, and increased the accuracy of the measurements. Personnel entries into the high radiation/contamination areas was minimized for a dose savings of 30 Rem (.3 Seivert) and a cost savings of $640K. In addition, the data gathered was utilized along with historical information to estimate the amount of remaining hazardous waste in the process cells. The B Plant facility is a canyon facility containing 40 process cells which were used to separate cesium and strontium from high level waste. The cells and vessels are contaminated with chemicals used in the separation and purification processes. Most of the contaminants have been removed but the residual contamination from spills in the cells and heels in the tanks contribute to the localized high radioactivity. The Gammacam{trademark} system consists of a high density terbium-activated scintillating glass detector coupled with a digitized video camera. Composite images generated by the system are presented in pseudo color over a black and white image. Exposure times can be set from 10 milliseconds to 1 hour depending on the field intensity. This information coupled with process knowledge is then used to document the hazardous waste remaining in each cell. Additional uses for this radiation mapping system would be in support of facilities stabilization and deactivation activities at Hanford or other DOE sites. The system is currently scheduled for installation and mapping of the U Plant in 1999. This system is unique due to its portability and its suitability for use in high dose rate areas.

  8. Remote Methodology used at B Plant Hanford to Map High Radiation and Contamination Fields and Document Remaining Hazards

    International Nuclear Information System (INIS)

    SIMMONS, F.M.

    2000-01-01

    A remote radiation mapping system using the Gammacam(trademark) (AIL Systems Inc. Trademark) with real-time response was used in deactivating the B Plant at Hanford to produce digitized images showing actual radiation fields and dose rates. Deployment of this technology has significantly reduced labor requirements, decreased personnel exposure, and increased the accuracy of the measurements. Personnel entries into the high radiation/contamination areas was minimized for a dose savings of 30 Rem (.3 Seivert) and a cost savings of $640K. In addition, the data gathered was utilized along with historical information to estimate the amount of remaining hazardous waste in the process cells. The B Plant facility is a canyon facility containing 40 process cells which were used to separate cesium and strontium from high level waste. The cells and vessels are contaminated with chemicals used in the separation and purification processes. Most of the contaminants have been removed but the residual contamination from spills in the cells and heels in the tanks contribute to the localized high radioactivity. The Gammacam(trademark) system consists of a high density terbium-activated scintillating glass detector coupled with a digitized video camera. Composite images generated by the system are presented in pseudo color over a black and white image. Exposure times can be set from 10 milliseconds to 1 hour depending on the field intensity. This information coupled with process knowledge is then used to document the hazardous waste remaining in each cell. Additional uses for this radiation mapping system would be in support of facilities stabilization and deactivation activities at Hanford or other DOE sites. The system is currently scheduled for installation and mapping of the U Plant in 1999. This system is unique due to its portability and its suitability for use in high dose rate areas

  9. Decree of the State Office for Nuclear Safety no. 146/1997 specifying nuclear safety-related activities and activities of special radiation protection relevance, requirements for qualification and professional education and training, procedures to examine special professional competence and to grant licences to selected personnel, and the format of documentation to be submitted when applying for selected personnel training licence

    International Nuclear Information System (INIS)

    Egermaier, J.

    2001-01-01

    The Decree is reproduced in the form of facsimile of the relevant pages of the official Collection of Laws of the Czech Republic, and accompanied by a commentary highlighting the past legislative developments and some aspects of this new document. (P.A.)

  10. Research on the nutrition and cognition of high-risk stroke groups in community and the relevant factors.

    Science.gov (United States)

    Zhao, N-N; Zeng, K-X; Wang, Y-L; Sheng, P-J; Tang, C-Z; Xiao, P; Liu, X-W

    2017-12-01

    To investigate the prevalence rate of nutritional risk in high-risk stroke groups in community, analyze its influencing factors, and analyze and compare the relationship between nutritional risk or malnutrition assessed by different nutritional evaluation methods and cognitive function, so as to provide the basis and guidance for clinical nutritional assessment and support. A cross-sectional survey was performed for 1196 cases in high-risk stroke groups in community from December 2015 to January 2017. At the same time, the nutritional status of patients was evaluated using the mini nutritional assessment (MNA) and MNA-short form (MNA-SF), and the cognitive status of patients was evaluated using the mini-mental state examination (MMSE). Moreover, the relevant influencing factors of nutritional risk and MMSE score were analyzed and compared. High-risk stroke groups in community suffered from a high risk of malnutrition. MNA-SF had a higher specificity and lower false positive rate than MNA. Nutritional risk occurred more easily in high-risk stroke groups in community with a history of diabetes mellitus, less physical exercise or light manual labor, daily use of multiple drugs, and higher age. Those with a higher nutritional risk were more prone to cognitive impairment. High-risk stroke groups in community, complicated with hyperhomocysteinemia, daily use of three or more kinds of prescription drugs, and a previous history of stroke, were accompanied by cognitive impairment easily. MNA-SF can be used for the nutritional screening of high-risk stroke groups in community. For the high-risk stroke groups in community, the rational nutritional diet should be publicized, blood sugar should be controlled in a scientific manner and physical exercise should be moderately increased.

  11. Current use of high-resolution mass spectrometry in drug screening relevant to clinical and forensic toxicology and doping control.

    Science.gov (United States)

    Ojanperä, Ilkka; Kolmonen, Marjo; Pelander, Anna

    2012-05-01

    Clinical and forensic toxicology and doping control deal with hundreds or thousands of drugs that may cause poisoning or are abused, are illicit, or are prohibited in sports. Rapid and reliable screening for all these compounds of different chemical and pharmaceutical nature, preferably in a single analytical method, is a substantial effort for analytical toxicologists. Combined chromatography-mass spectrometry techniques with standardised reference libraries have been most commonly used for the purpose. In the last ten years, the focus has shifted from gas chromatography-mass spectrometry to liquid chromatography-mass spectrometry, because of progress in instrument technology and partly because of the polarity and low volatility of many new relevant substances. High-resolution mass spectrometry (HRMS), which enables accurate mass measurement at high resolving power, has recently evolved to the stage that is rapidly causing a shift from unit-resolution, quadrupole-dominated instrumentation. The main HRMS techniques today are time-of-flight mass spectrometry and Orbitrap Fourier-transform mass spectrometry. Both techniques enable a range of different drug-screening strategies that essentially rely on measuring a compound's or a fragment's mass with sufficiently high accuracy that its elemental composition can be determined directly. Accurate mass and isotopic pattern acts as a filter for confirming the identity of a compound or even identification of an unknown. High mass resolution is essential for improving confidence in accurate mass results in the analysis of complex biological samples. This review discusses recent applications of HRMS in analytical toxicology.

  12. A methodology for developing high-integrity knowledge base using document analysis and ECPN matrix analysis with backward simulation

    International Nuclear Information System (INIS)

    Park, Joo Hyun

    1999-02-01

    When transitions occur in large systems such as nuclear power plants (NPPs) or industrial process plants, it is often difficult to diagnose them. Various computer-based operator-aiding systems have been developed in order to help operators diagnose the transitions of the plants. In procedures for developing knowledge base system like operator-aiding systems, the knowledge acquisition and the knowledge base verification are core activities. This dissertation describes a knowledge acquisition method and a knowledge base verification method for developing high-integrity knowledge base system of NPP expert systems. The knowledge acquisition is one of the most difficult and time-consuming activities in developing knowledge base systems. There are two kinds of knowledge acquisition methods in view of knowledge sources. One is an acquisition method from human expert. This method, however, is not adequate to acquire the knowledge of NPP expert systems because the number of experts is not sufficient. In this work, we propose a novel knowledge acquisition method through documents analysis. The knowledge base can be built correctly, rapidly, and partially automatically through this method. This method is especially useful when it is difficult to find domain experts. Reliability of knowledge base systems depends on the quality of their knowledge base. Petri Net has been used to verify knowledge bases due to their formal outputs. The methods using Petri Net however are difficult to apply to large and complex knowledge bases because the Net becomes very large and complex. Also, with Petri Net, it is difficult to find proper input patterns that make anomalies occur. In order to overcome this difficulty, in this work, the anomaly candidates detection methods are developed based on Extended CPN (ECPN) matrix analysis. This work also defines the backward simulation of CPN to find compact input patterns for anomaly detection, which starts simulation from the anomaly candidates

  13. High-angle scattering events strongly affect light collection in clinically relevant measurement geometries for light transport through tissue

    International Nuclear Information System (INIS)

    Canpolat, M.; Mourant, J.R.

    2000-01-01

    Measurement of light transport in tissue has the potential to be an inexpensive and practical tool for non-invasive tissue diagnosis in medical applications because it can provide information on both morphological and biochemical properties. To capitalize on the potential of light transport as a diagnostic tool, an understanding of what information can be gleaned from light transport measurements is needed. We present data concerning the sensitivity of light transport measurements, made in clinically relevant geometries, to scattering properties. The intensity of the backscattered light at small source-detector separations is shown to be sensitive to the phase function, and furthermore the collected light intensity is found to be correlated with the amount of high-angle scattering in the medium. (author)

  14. Reliable planning and monitoring tools by dismantling 3D photographic image of high resolution and document management systems. Application MEDS system

    International Nuclear Information System (INIS)

    Vela Morales, F.

    2010-01-01

    MEDS system (Metric Environment Documentation System) is a method developed by CT3 based engineering documentation generation metric of a physical environment using measurement tools latest technology and high precision, such as the Laser Scanner. With this equipment it is possible to obtain three-dimensional information of a physical environment through the 3D coordinates of millions of points. This information is processed by software that is very useful tool for modeling operations and 3D simulations.

  15. Relevance of P-glycoprotein on CXCR4+ B cells to organ manifestation in highly active rheumatoid arthritis.

    Science.gov (United States)

    Tsujimura, Shizuyo; Adachi, Tomoko; Saito, Kazuyoshi; Kawabe, Akio; Tanaka, Yoshiya

    2018-03-01

    In rheumatoid arthritis (RA), P-glycoprotein (P-gp) expression on activated B cells is associated with active efflux of intracellular drugs, resulting in drug resistance. CXCR4 is associated with migration of B cells. This study was designed to elucidate the relevance of P-gp expression on CXCR4 + B cells to clinical manifestations in refractory RA. CD19 + B cells were analyzed using flow cytometry and immunohistochemistry. P-gp was highly expressed especially on CXCR4 + CD19 + B cells in RA. The proportion of P-gp-expressing CXCR4 + B cells correlated with disease activity, estimated by Simplified Disease Activity Index (SDAI), and showed marked expansion in RA patients with high SDAI and extra-articular involvement. In highly active RA, massive infiltration of P-gp + CXCR4 + CD19 + B cells was noted in CXCL12-expressing inflammatory lesions of RA synovitis and RA-associated interstitial pneumonitis. In RA patient with active extra-articular involvement, intracellular dexamethasone level (IDL) in lymphocytes diminished with expansion of P-gp + CXCR4 + CD19 + B cells. Adalimumab reduced P-gp + CXCR4 + CD19 + B cells, increased IDL in lymphocytes, and improved the clinical manifestation and allowed tapering of concomitant medications. Expansion of P-gp + CXCR4 + B cells seems to be associated with drug resistance, disease activity and progressive destructive arthritis with extra-articular involvement in RA.

  16. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted.   CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat a...

  17. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the natu...

  18. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the natur...

  19. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ Management- CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management - CB - MB - FB Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2007 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of employment and ...

  20. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ Management- CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management - CB - MB - FB Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2007 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of em¬pl...

  1. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the iCMS Web site. The following items can be found on: http://cms.cern.ch/iCMS/ General - CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. LHC Symposiums Management - CB - MB - FB - FMC Agendas and minutes are accessible to CMS members through their AFS account (ZH). However some linked documents are restricted to the Board Members. FB documents are only accessible to FB members. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2006 Annual reviews are posted. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral students upon completion of their theses. Therefore it is requested that Ph.D students inform the CMS Secretariat about the na...

  2. Document Models

    Directory of Open Access Journals (Sweden)

    A.A. Malykh

    2017-08-01

    Full Text Available In this paper, the concept of locally simple models is considered. Locally simple models are arbitrarily complex models built from relatively simple components. A lot of practically important domains of discourse can be described as locally simple models, for example, business models of enterprises and companies. Up to now, research in human reasoning automation has been mainly concentrated around the most intellectually intensive activities, such as automated theorem proving. On the other hand, the retailer business model is formed from ”jobs”, and each ”job” can be modelled and automated more or less easily. At the same time, the whole retailer model as an integrated system is extremely complex. In this paper, we offer a variant of the mathematical definition of a locally simple model. This definition is intended for modelling a wide range of domains. Therefore, we also must take into account the perceptual and psychological issues. Logic is elitist, and if we want to attract to our models as many people as possible, we need to hide this elitism behind some metaphor, to which ’ordinary’ people are accustomed. As such a metaphor, we use the concept of a document, so our locally simple models are called document models. Document models are built in the paradigm of semantic programming. This allows us to achieve another important goal - to make the documentary models executable. Executable models are models that can act as practical information systems in the described domain of discourse. Thus, if our model is executable, then programming becomes redundant. The direct use of a model, instead of its programming coding, brings important advantages, for example, a drastic cost reduction for development and maintenance. Moreover, since the model is well and sound, and not dissolved within programming modules, we can directly apply AI tools, in particular, machine learning. This significantly expands the possibilities for automation and

  3. The dynamic development of the muzzle imprint by contact gunshot: high-speed documentation utilizing the "skin-skull-brain model".

    Science.gov (United States)

    Thali, M J; Kneubuehl, B P; Dirnhofer, R; Zollinger, U

    2002-07-17

    Many contact gunshots produce a muzzle imprint in the skin of the victim. Different mechanisms have been discussed in literature as being responsible for the creation of the muzzle imprint. Experimenting upon the synthetic non biological skin-skull-brain model, our goal was to document and study the creation of the muzzle imprint with the aid of high-speed photography. In our experiments, we could document with our high-speed photography (at exposure rates in the range of nanoseconds) the bulging, the pressing against the muzzle, and the splitting of the artificial skin. Furthermore, it was possible to photographically record the back pattern of synthetic tissue particles. And, the soot and gunpowder cavity could be reproduced experimentally. In conclusion the experiments completed with the skin-skull-brain model, using high-speed photography for documentation, show the promising possibilities of experimental ballistics with body models.

  4. How Is Buddhism Relevant to Career Counseling in an International High School in Hong Kong? A Counsellor's Reflection

    Science.gov (United States)

    Ng, Vinci; Yuen, Mantak

    2015-01-01

    This paper reflects upon the relevance of Buddhism to counselling in general and to career counseling in particular by discussing a program implemented at an international school in Hong Kong. The authors provide an analysis of the pertinent literature related to relevant concepts within Buddhism. This topic has not yet been adequately researched…

  5. Employing high resolution satellite imagery to document a rapid glacier surge in the Karakoram - risks and opportunities for hazard assessment

    Science.gov (United States)

    Steiner, J. F.; Kraaijenbrink, P. D. A.; Jiduc, S. G.; Immerzeel, W. W.

    2017-12-01

    Glacier surges occur regularly in the Karakoram but their driving mechanisms, recurrence and its relation to climatic change remain unclear. Since many glacier tongues in the region reach to very low elevations, local populations are often exposed to glacial hazards. While the scientific interpretation of hazard is one challenge, adequately communicating results to possibly affected stakeholders poses a different set of hurdles. Using DEMs as well as Landsat imagery in combination with high-resolution Planet imagery we quantify surface elevation changes and flow velocities to document a glacier surge of the Khurdopin glacier, located in a remote valley in Pakistan, in the first half of 2017. Results reveal that an accumulation of ice mass leads to a rapid surge in peaking with velocities above 5000 m a-1 or 0.5 m h-1 during a few days. Velocities increase steadily during a four-year build-up phase prior to the actual surge, while the remaining 15 years of the recurring cycle the glacier is quiescent. It is hypothesized that the surge is mainly initiated as a result of increased pressure melting caused by ice accumulation. However, surface observations show increased crevassing and disappearance of supra glacial ponds, which could have led to increased lubrication of the glacier bed. As a consequence of the surging tongue blocking the main valley a lake has formed and grown continuously in size over two months at a rate of up to 3000 m2 per day. Using satellite imagery with a frequent overpass rate we are able to (a) characterize the nature of glacier surges in the region with greater detail and (b) monitor the surge as well as the formation of the lake as it develops. Having developed a connection to local stakeholders we were able to provide rapid hazard assessments to affected communities, which can be employed to define possible actions. We show the potential of satellite imagery - freely available Landsat in combination with commercial Planet imagery -, which

  6. Integration of Geomatics Techniques for Digitizing Highly Relevant Geological and Cultural Heritage Sites: the Case of San Leo (italy)

    Science.gov (United States)

    Girelli, V. A.; Borgatti, L.; Dellapasqua, M.; Mandanici, E.; Spreafico, M. C.; Tini, M. A.; Bitelli, G.

    2017-08-01

    The research activities described in this contribution were carried out at San Leo (Italy). The town is located on the top of a quadrangular rock slab affected by a complex system of fractures and has a wealth of cultural heritage, as evidenced by the UNESCO's nomination. The management of this fragile set requires a comprehensive system of geometrical information to analyse and preserve all the geological and cultural features. In this perspective, the latest Geomatics techniques were used to perform some detailed surveys and to manage the great amount of acquired geometrical knowledge of both natural (the cliff) and historical heritage. All the data were also georeferenced in a unique reference system. In particular, high accurate terrestrial laser scanner surveys were performed for the whole cliff, in order to obtain a dense point cloud useful for a large number of geological studies, among others the analyses of the last rockslide by comparing pre- and post-event data. Moreover, the geometrical representation of the historical centre was performed using different approaches, in order to generate an accurate DTM and DSM of the site. For these purposes, a large scale numerical map was used, integrating the data with GNSS and laser surveys of the area. Finally, many surveys were performed with different approaches on some of the most relevant monuments of the town. In fact, these surveys were performed by terrestrial laser scanner, light structured scanner and photogrammetry, the last mainly applied with the Structure from Motion approach.

  7. Orbitmpi Documentation

    International Nuclear Information System (INIS)

    Lowe, Lisa L.

    2000-01-01

    Orbitmpi is a parallelized version of Roscoe White's Orbit code. The code has been parallelized using MPI, which makes it portable to many types of machines. The guidelines used for the parallelization were to increase code performance with minimal changes to the code's original structure. This document gives a general description of how the parallel sections of the code run. It discusses the changes made to the original code and comments on the general procedure for future additions to Orbitmpi, as well as describing the effects of a parallelized random number generator on the code's output. Finally, the scaling results from Hecate and from Puffin are presented. Hecate is a 64-processor Origin 2000 machine, with MIPS R12000 processors and 16GB of memory, and Puffin is a PC cluster with 9 dual-processor 450 MHz Pentium III (18 processors max.), with 100Mbits ethernet communication

  8. The flip-over effect in pulsed laser deposition: Is it relevant at high background gas pressures?

    International Nuclear Information System (INIS)

    Ojeda-G-P, Alejandro; Schneider, Christof W.; Döbeli, Max; Lippert, Thomas; Wokaun, Alexander

    2015-01-01

    Highlights: • The flip-over effect in PLD is observed up to high deposition pressures. • Consistent congruent transfer of the target composition is generally not correct. • The choice of deposition pressure can change the film composition strongly. • Large compositional changes appear at high off-axis angles and large spot sizes. - Abstract: In pulsed laser deposition the use of a rectangular or elliptical beam spot with a non 1:1 aspect ratio leads to the so called flip-over effect. Here, the longest dimension of the laser spot results in the shortest direction of plasma plume expansion. This effect has been mainly reported for vacuum depositions of single element targets and is particularly noticeable when the aspect ratio of the beam spot is large. We investigate the flip-over effect in vacuum and at three relevant background-gas pressures for pulsed laser deposition using a La 0.4 Ca 0.6 MnO 3 target by measuring the thickness dependence of the deposited material as a function of angle. The film thicknesses and compositions are determined by Rutherford backscattering and argon is used to reduce the influence of additional chemical reactions in the plasma. The results show the prevalence of the flip-over effect for all pressures except for the highest, i.e. 1 × 10 −1 mbar, where the film thickness is constant for all angles. The composition profiles show noticeable compositional variations of up to 30% with respect to the target material depending on the background gas pressure, the angular location, and the laser spot dimensions.

  9. The flip-over effect in pulsed laser deposition: Is it relevant at high background gas pressures?

    Energy Technology Data Exchange (ETDEWEB)

    Ojeda-G-P, Alejandro [Paul Scherrer Institut, General Energy Research Department, 5232 Villigen-PSI (Switzerland); Schneider, Christof W., E-mail: christof.schneider@psi.ch [Paul Scherrer Institut, General Energy Research Department, 5232 Villigen-PSI (Switzerland); Döbeli, Max [Ion Beam Physics, ETH Zurich, CH-8093 Zurich (Switzerland); Lippert, Thomas; Wokaun, Alexander [Paul Scherrer Institut, General Energy Research Department, 5232 Villigen-PSI (Switzerland)

    2015-12-01

    Highlights: • The flip-over effect in PLD is observed up to high deposition pressures. • Consistent congruent transfer of the target composition is generally not correct. • The choice of deposition pressure can change the film composition strongly. • Large compositional changes appear at high off-axis angles and large spot sizes. - Abstract: In pulsed laser deposition the use of a rectangular or elliptical beam spot with a non 1:1 aspect ratio leads to the so called flip-over effect. Here, the longest dimension of the laser spot results in the shortest direction of plasma plume expansion. This effect has been mainly reported for vacuum depositions of single element targets and is particularly noticeable when the aspect ratio of the beam spot is large. We investigate the flip-over effect in vacuum and at three relevant background-gas pressures for pulsed laser deposition using a La{sub 0.4}Ca{sub 0.6}MnO{sub 3} target by measuring the thickness dependence of the deposited material as a function of angle. The film thicknesses and compositions are determined by Rutherford backscattering and argon is used to reduce the influence of additional chemical reactions in the plasma. The results show the prevalence of the flip-over effect for all pressures except for the highest, i.e. 1 × 10{sup −1} mbar, where the film thickness is constant for all angles. The composition profiles show noticeable compositional variations of up to 30% with respect to the target material depending on the background gas pressure, the angular location, and the laser spot dimensions.

  10. Q&A. Does Machiavelli’s The Prince Have Relevant Lessons for Modern High-Tech Managers and Leaders?

    OpenAIRE

    Clovia Hamilton

    2017-01-01

    Can a 16th-century political treatise provide any guidance on today’s competitive environment? There are two camps among scholars regarding the relevancy of Niccolò Machiavelli’s book The Prince (Machiavelli,1992) to modern day management and leadership. Some scholars argue that the book has never been or is no longer relevant to business management and leadership (Agbude, 2014; Fournel, 2014; Jackson, 2013; Tillyris, 2015). Some contend that it is indeed relevant (Konno, 2014; O’Sullivan, 20...

  11. High School Longitudinal Study of 2009 (HSLS:09) Base Year to First Follow-Up Data File Documentation. NCES 2014-361

    Science.gov (United States)

    Ingels, Steven J.; Pratt, Daniel J.; Herget, Deborah R.; Dever, Jill A.; Fritch, Laura Burns; Ottem, Randolph; Rogers, James E.; Kitmitto, Sami; Leinwand, Steve

    2013-01-01

    This manual has been produced to familiarize data users with the design, and the procedures followed for data collection and processing, in the base year and first follow-up of the High School Longitudinal Study of 2009 (HSLS:09), with emphasis on the first follow-up. It also provides the necessary documentation for use of the public-use data…

  12. High School Longitudinal Study of 2009 (HSLS:09) Base Year to First Follow-Up Data File Documentation. Appendixes. NCES 2014-361

    Science.gov (United States)

    Ingels, Steven J.; Pratt, Daniel J.; Herget, Deborah R.; Dever, Jill A.; Fritch, Laura Burns; Ottem, Randolph; Rogers, James E.; Kitmitto, Sami; Leinwand, Steve

    2013-01-01

    The manual that accompanies these appendices was produced to familiarize data users with the design, and the procedures followed for data collection and processing, in the base year and first follow-up of the High School Longitudinal Study of 2009 (HSLS:09), with emphasis on the first follow-up. It also provides the necessary documentation for use…

  13. CMS DOCUMENTATION

    CERN Multimedia

    CMS TALKS AT MAJOR MEETINGS The agenda and talks from major CMS meetings can now be electronically accessed from the ICMS Web site. The following items can be found on: http://cms.cern.ch/iCMS Management – CMS Weeks (Collaboration Meetings), CMS Weeks Agendas The talks presented at the Plenary Sessions. Management – CB – MB – FB Agendas and minutes are accessible to CMS members through Indico. LHCC The talks presented at the ‘CMS Meetings with LHCC Referees’ are available on request from the PM or MB Country Representative. Annual Reviews The talks presented at the 2008 Annual Reviews are posted in Indico. CMS DOCUMENTS It is considered useful to establish information on the first employment of CMS doctoral student upon completion of their theses.  Therefore it is requested that Ph.D students inform the CMS Secretariat about the nature of employment and name of their first employer. The Notes, Conference Reports and Theses published si...

  14. CNEA's quality system documentation

    International Nuclear Information System (INIS)

    Mazzini, M.M.; Garonis, O.H.

    1998-01-01

    Full text: To obtain an effective and coherent documentation system suitable for CNEA's Quality Management Program, we decided to organize the CNEA's quality documentation with : a- Level 1. Quality manual. b- Level 2. Procedures. c-Level 3. Qualities plans. d- Level 4: Instructions. e- Level 5. Records and other documents. The objective of this work is to present a standardization of the documentation of the CNEA's quality system of facilities, laboratories, services, and R and D activities. Considering the diversity of criteria and formats for elaboration the documentation by different departments, and since ultimately each of them generally includes the same quality management policy, we proposed the elaboration of a system in order to improve the documentation, avoiding unnecessary time wasting and costs. This will aloud each sector to focus on their specific documentation. The quality manuals of the atomic centers fulfill the rule 3.6.1 of the Nuclear Regulatory Authority, and the Safety Series 50-C/SG-Q of the International Atomic Energy Agency. They are designed by groups of competent and highly trained people of different departments. The normative procedures are elaborated with the same methodology as the quality manuals. The quality plans which describe the organizational structure of working group and the appropriate documentation, will asses the quality manuals of facilities, laboratories, services, and research and development activities of atomic centers. The responsibilities for approval of the normative documentation are assigned to the management in charge of the administration of economic and human resources in order to fulfill the institutional objectives. Another improvement aimed to eliminate unnecessary invaluable processes is the inclusion of all quality system's normative documentation in the CNEA intranet. (author) [es

  15. High pressure inactivation of relevant target microorganisms in poultry meat products and the evaluation of pressure-induced protein denaturation of marinated poultry under different high pressure treatments

    Science.gov (United States)

    Schmidgall, Johanna; Hertel, Christian; Bindrich, Ute; Heinz, Volker; Toepfl, Stefan

    2011-03-01

    In this study, the possibility of extending shelf life of marinated poultry meat products by high pressure processing was evaluated. Relevant spoilage and pathogenic strains were selected and used as target microorganisms (MOs) for challenge experiments. Meat and brine were inoculated with MOs and treated at 450 MPa, 4 °C for 3 min. The results of inactivation show a decreasing pressure tolerance in the series Lactobacillus > Arcobacter > Carnobacterium > Bacillus cereus > Brochothrix thermosphacta > Listeria monocytogenes. Leuconostoc gelidum exhibited the highest pressure tolerance in meat. A protective effect of poultry meat was found for L. sakei and L. gelidum. In parallel, the influence of different marinade formulations (pH, carbonates, citrates) on protein structure changes during a pressure treatment was investigated. Addition of sodium carbonate shows a protection against denaturation of myofibrillar proteins and provides a maximum water-holding capacity. Caustic marinades allowed a higher retention of product characteristics than low-pH marinades.

  16. Characterization of Metagenomes in Urban Aquatic Compartments Reveals High Prevalence of Clinically Relevant Antibiotic Resistance Genes in Wastewaters

    Directory of Open Access Journals (Sweden)

    Charmaine Ng

    2017-11-01

    Full Text Available The dissemination of antimicrobial resistance (AMR is an escalating problem and a threat to public health. Comparative metagenomics was used to investigate the occurrence of antibiotic resistant genes (ARGs in wastewater and urban surface water environments in Singapore. Hospital and municipal wastewater (n = 6 were found to have higher diversity and average abundance of ARGs (303 ARG subtypes, 197,816 x/Gb compared to treated wastewater effluent (n = 2, 58 ARG subtypes, 2,692 x/Gb and surface water (n = 5, 35 subtypes, 7,985 x/Gb. A cluster analysis showed that the taxonomic composition of wastewaters was highly similar and had a bacterial community composition enriched in gut bacteria (Bacteroides, Faecalibacterium, Bifidobacterium, Blautia, Roseburia, Ruminococcus, the Enterobacteriaceae group (Klebsiella, Aeromonas, Enterobacter and opportunistic pathogens (Prevotella, Comamonas, Neisseria. Wastewater, treated effluents and surface waters had a shared resistome of 21 ARGs encoding multidrug resistant efflux pumps or resistance to aminoglycoside, macrolide-lincosamide-streptogramins (MLS, quinolones, sulfonamide, and tetracycline resistance which suggests that these genes are wide spread across different environments. Wastewater had a distinctively higher average abundance of clinically relevant, class A beta-lactamase resistant genes (i.e., blaKPC, blaCTX-M, blaSHV, blaTEM. The wastewaters from clinical isolation wards, in particular, had a exceedingly high levels of blaKPC-2 genes (142,200 x/Gb, encoding for carbapenem resistance. Assembled scaffolds (16 and 30 kbp from isolation ward wastewater samples indicated this gene was located on a Tn3-based transposon (Tn4401, a mobilization element found in Klebsiella pneumonia plasmids. In the longer scaffold, transposable elements were flanked by a toxin–antitoxin (TA system and other metal resistant genes that likely increase the persistence, fitness and propagation of the plasmid in the

  17. Omega documentation

    Energy Technology Data Exchange (ETDEWEB)

    Howerton, R.J.; Dye, R.E.; Giles, P.C.; Kimlinger, J.R.; Perkins, S.T.; Plechaty, E.F.

    1983-08-01

    OMEGA is a CRAY I computer program that controls nine codes used by LLNL Physical Data Group for: 1) updating the libraries of evaluated data maintained by the group (UPDATE); 2) calculating average values of energy deposited in secondary particles and residual nuclei (ENDEP); 3) checking the libraries for internal consistency, especially for energy conservation (GAMCHK); 4) producing listings, indexes and plots of the library data (UTILITY); 5) producing calculational constants such as group averaged cross sections and transfer matrices for diffusion and Sn transport codes (CLYDE); 6) producing and updating standard files of the calculational constants used by LLNL Sn and diffusion transport codes (NDFL); 7) producing calculational constants for Monte Carlo transport codes that use group-averaged cross sections and continuous energy for particles (CTART); 8) producing and updating standard files used by the LLNL Monte Carlo transport codes (TRTL); and 9) producing standard files used by the LANL pointwise Monte Carlo transport code MCNP (MCPOINT). The first four of these functions and codes deal with the libraries of evaluated data and the last five with various aspects of producing calculational constants for use by transport codes. In 1970 a series, called PD memos, of internal and informal memoranda was begun. These were intended to be circulated among the group for comment and then to provide documentation for later reference whenever questions arose about the subject matter of the memos. They have served this purpose and now will be drawn upon as source material for this more comprehensive report that deals with most of the matters covered in those memos.

  18. Omega documentation

    International Nuclear Information System (INIS)

    Howerton, R.J.; Dye, R.E.; Giles, P.C.; Kimlinger, J.R.; Perkins, S.T.; Plechaty, E.F.

    1983-08-01

    OMEGA is a CRAY I computer program that controls nine codes used by LLNL Physical Data Group for: 1) updating the libraries of evaluated data maintained by the group (UPDATE); 2) calculating average values of energy deposited in secondary particles and residual nuclei (ENDEP); 3) checking the libraries for internal consistency, especially for energy conservation (GAMCHK); 4) producing listings, indexes and plots of the library data (UTILITY); 5) producing calculational constants such as group averaged cross sections and transfer matrices for diffusion and Sn transport codes (CLYDE); 6) producing and updating standard files of the calculational constants used by LLNL Sn and diffusion transport codes (NDFL); 7) producing calculational constants for Monte Carlo transport codes that use group-averaged cross sections and continuous energy for particles (CTART); 8) producing and updating standard files used by the LLNL Monte Carlo transport codes (TRTL); and 9) producing standard files used by the LANL pointwise Monte Carlo transport code MCNP (MCPOINT). The first four of these functions and codes deal with the libraries of evaluated data and the last five with various aspects of producing calculational constants for use by transport codes. In 1970 a series, called PD memos, of internal and informal memoranda was begun. These were intended to be circulated among the group for comment and then to provide documentation for later reference whenever questions arose about the subject matter of the memos. They have served this purpose and now will be drawn upon as source material for this more comprehensive report that deals with most of the matters covered in those memos

  19. Inverted topographic features, now submerged beneath the water of Lake Nasser, document a morphostratigraphic sequence of high-amplitude late-Pleistocene climate oscillation in Egyptian Nubia

    Science.gov (United States)

    Giegengack, Robert; Zaki, Abdallah S.

    2017-12-01

    The Nile Valley between the Second Cataract at Wadi Halfa and the First Cataract at Aswan has been inundated behind two dams - the Aswan Dam, first built in 1902, and the High Dam (Sa'ad el A'ali), that blocked the flow of the Nile in 1964. The anticipated loss of archeological monuments in Lake Nasser, the reservoir behind the High Dam, initiated an international campaign to protect, move, or at least document as many of those monuments as possible.

  20. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 1

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The purpose of this Requirements Identification Document (RID) section is to identify, in one location, all of the facility specific requirements and good industry practices which are necessary or important to establish an effective Issues Management Program for the Tank Farm Facility. The Management Systems Functional Area includes the site management commitment to environmental safety and health (ES&H) policies and controls, to compliance management, to development and management of policy and procedures, to occurrence reporting and corrective actions, resource and issue management, and to the self-assessment process.

  1. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 1

    International Nuclear Information System (INIS)

    1994-04-01

    The purpose of this Requirements Identification Document (RID) section is to identify, in one location, all of the facility specific requirements and good industry practices which are necessary or important to establish an effective Issues Management Program for the Tank Farm Facility. The Management Systems Functional Area includes the site management commitment to environmental safety and health (ES ampersand H) policies and controls, to compliance management, to development and management of policy and procedures, to occurrence reporting and corrective actions, resource and issue management, and to the self-assessment process

  2. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 4

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    Radiation protection of personnel and the public is accomplished by establishing a well defined Radiation Protection Organization to ensure that appropriate controls on radioactive materials and radiation sources are implemented and documented. This Requirements Identification Document (RID) applies to the activities, personnel, structures, systems, components, and programs involved in executing the mission of the Tank Farms. The physical boundaries within which the requirements of this RID apply are the Single Shell Tank Farms, Double Shell Tank Farms, 242-A Evaporator-Crystallizer, 242-S, T Evaporators, Liquid Effluent Retention Facility (LERF), Purgewater Storage Facility (PWSF), and all interconnecting piping, valves, instrumentation, and controls. Also included is all piping, valves, instrumentation, and controls up to and including the most remote valve under Tank Farms control at any other Hanford Facility having an interconnection with Tank Farms. The boundary of the structures, systems, components, and programs to which this RID applies, is defined by those that are dedicated to and/or under the control of the Tank Farms Operations Department and are specifically implemented at the Tank Farms.

  3. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 2

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Quality Assurance Functional Area Requirements Identification Document (RID), addresses the programmatic requirements that ensure risks and environmental impacts are minimized, ensure safety, reliability, and performance are maximized through the application of effective management systems commensurate with the risks posed by the Tank Farm Facility and its operation. This RID incorporates guidance intended to provide Tank Farms management with the necessary requirements information to develop, upgrade, or assess the effectiveness of a Quality Assurance Program in the performance of organizational and functional activities. Quality Assurance is defined as all those planned and systematic actions necessary to provide adequate confidence that a facility, structure, system, or component will perform satisfactorily and safely in service. This document will provide the specific requirements to meet DNFSB recommendations and the guidance provided in DOE Order 5700.6C, utilizing industry codes, standards, regulatory guidelines, and industry good practices that have proven to be essential elements for an effective and efficient Quality Assurance Program as the nuclear industry has matured over the last thirty years.

  4. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 2

    International Nuclear Information System (INIS)

    1994-04-01

    The Quality Assurance Functional Area Requirements Identification Document (RID), addresses the programmatic requirements that ensure risks and environmental impacts are minimized, ensure safety, reliability, and performance are maximized through the application of effective management systems commensurate with the risks posed by the Tank Farm Facility and its operation. This RID incorporates guidance intended to provide Tank Farms management with the necessary requirements information to develop, upgrade, or assess the effectiveness of a Quality Assurance Program in the performance of organizational and functional activities. Quality Assurance is defined as all those planned and systematic actions necessary to provide adequate confidence that a facility, structure, system, or component will perform satisfactorily and safely in service. This document will provide the specific requirements to meet DNFSB recommendations and the guidance provided in DOE Order 5700.6C, utilizing industry codes, standards, regulatory guidelines, and industry good practices that have proven to be essential elements for an effective and efficient Quality Assurance Program as the nuclear industry has matured over the last thirty years

  5. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 4

    International Nuclear Information System (INIS)

    1994-04-01

    Radiation protection of personnel and the public is accomplished by establishing a well defined Radiation Protection Organization to ensure that appropriate controls on radioactive materials and radiation sources are implemented and documented. This Requirements Identification Document (RID) applies to the activities, personnel, structures, systems, components, and programs involved in executing the mission of the Tank Farms. The physical boundaries within which the requirements of this RID apply are the Single Shell Tank Farms, Double Shell Tank Farms, 242-A Evaporator-Crystallizer, 242-S, T Evaporators, Liquid Effluent Retention Facility (LERF), Purgewater Storage Facility (PWSF), and all interconnecting piping, valves, instrumentation, and controls. Also included is all piping, valves, instrumentation, and controls up to and including the most remote valve under Tank Farms control at any other Hanford Facility having an interconnection with Tank Farms. The boundary of the structures, systems, components, and programs to which this RID applies, is defined by those that are dedicated to and/or under the control of the Tank Farms Operations Department and are specifically implemented at the Tank Farms

  6. Transportation System Requirements Document

    International Nuclear Information System (INIS)

    1993-09-01

    This Transportation System Requirements Document (Trans-SRD) describes the functions to be performed by and the technical requirements for the Transportation System to transport spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from Purchaser and Producer sites to a Civilian Radioactive Waste Management System (CRWMS) site, and between CRWMS sites. The purpose of this document is to define the system-level requirements for Transportation consistent with the CRWMS Requirement Document (CRD). These requirements include design and operations requirements to the extent they impact on the development of the physical segments of Transportation. The document also presents an overall description of Transportation, its functions, its segments, and the requirements allocated to the segments and the system-level interfaces with Transportation. The interface identification and description are published in the CRWMS Interface Specification

  7. Motivation in Second Language Learning: A Historical Overview and Its Relevance in a Public High School in Pasto, Colombia

    Science.gov (United States)

    Guerrero, Mario

    2015-01-01

    Motivation has a significant role in the process of language learning. It is important to understand its theoretical evolution in this field to be able to consider its relevance in the learning and teaching of a foreign language. Motivation is a term that is commonly used among language teachers and language learners but perhaps many are not aware…

  8. Comprehensive Non-Destructive Conservation Documentation of Lunar Samples Using High-Resolution Image-Based 3D Reconstructions and X-Ray CT Data

    Science.gov (United States)

    Blumenfeld, E. H.; Evans, C. A.; Oshel, E. R.; Liddle, D. A.; Beaulieu, K.; Zeigler, R. A.; Hanna, R. D.; Ketcham, R. A.

    2015-01-01

    Established contemporary conservation methods within the fields of Natural and Cultural Heritage encourage an interdisciplinary approach to preservation of heritage material (both tangible and intangible) that holds "Outstanding Universal Value" for our global community. NASA's lunar samples were acquired from the moon for the primary purpose of intensive scientific investigation. These samples, however, also invoke cultural significance, as evidenced by the millions of people per year that visit lunar displays in museums and heritage centers around the world. Being both scientifically and culturally significant, the lunar samples require a unique conservation approach. Government mandate dictates that NASA's Astromaterials Acquisition and Curation Office develop and maintain protocols for "documentation, preservation, preparation and distribution of samples for research, education and public outreach" for both current and future collections of astromaterials. Documentation, considered the first stage within the conservation methodology, has evolved many new techniques since curation protocols for the lunar samples were first implemented, and the development of new documentation strategies for current and future astromaterials is beneficial to keeping curation protocols up to date. We have developed and tested a comprehensive non-destructive documentation technique using high-resolution image-based 3D reconstruction and X-ray CT (XCT) data in order to create interactive 3D models of lunar samples that would ultimately be served to both researchers and the public. These data enhance preliminary scientific investigations including targeted sample requests, and also provide a new visual platform for the public to experience and interact with the lunar samples. We intend to serve these data as they are acquired on NASA's Astromaterials Acquisistion and Curation website at http://curator.jsc.nasa.gov/. Providing 3D interior and exterior documentation of astromaterial

  9. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 3

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Safeguards and Security (S&S) Functional Area address the programmatic and technical requirements, controls, and standards which assure compliance with applicable S&S laws and regulations. Numerous S&S responsibilities are performed on behalf of the Tank Farm Facility by site level organizations. Certain other responsibilities are shared, and the remainder are the sole responsibility of the Tank Farm Facility. This Requirements Identification Document describes a complete functional Safeguards and Security Program that is presumed to be the responsibility of the Tank Farm Facility. The following list identifies the programmatic elements in the S&S Functional Area: Program Management, Protection Program Scope and Evaluation, Personnel Security, Physical Security Systems, Protection Program Operations, Material Control and Accountability, Information Security, and Key Program Interfaces.

  10. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 3

    International Nuclear Information System (INIS)

    1994-04-01

    The Safeguards and Security (S ampersand S) Functional Area address the programmatic and technical requirements, controls, and standards which assure compliance with applicable S ampersand S laws and regulations. Numerous S ampersand S responsibilities are performed on behalf of the Tank Farm Facility by site level organizations. Certain other responsibilities are shared, and the remainder are the sole responsibility of the Tank Farm Facility. This Requirements Identification Document describes a complete functional Safeguards and Security Program that is presumed to be the responsibility of the Tank Farm Facility. The following list identifies the programmatic elements in the S ampersand S Functional Area: Program Management, Protection Program Scope and Evaluation, Personnel Security, Physical Security Systems, Protection Program Operations, Material Control and Accountability, Information Security, and Key Program Interfaces

  11. Summary of the OECD Halden Reactor Project Programme on high burn-up fuel performance relevant for BWRs

    International Nuclear Information System (INIS)

    McGrath, M.A.

    1998-01-01

    The basis for the Halden Reactor Project Programme is presented together with an overview of the content of the programme for the time period 1997-1999. The concept of using both separate effects studies, to determine particular fuel properties, and integral rod behaviour studies of commercial fuel is explained. Each of the items in the programme relevant for BWRs are introduced, with most being discussed in further detail. (author)

  12. Documentation of spectrom-32

    International Nuclear Information System (INIS)

    Callahan, G.D.; Fossum, A.F.; Svalstad, D.K.

    1989-01-01

    SPECTROM-32 is a finite element program for analyzing two-dimensional and axisymmetric inelastic thermomechanical problems related to the geological disposal of nuclear waste. The code is part of the SPECTROM series of special-purpose computer programs that are being developed by RE/SPEC Inc. to address many unique rock mechanics problems encountered in analyzing radioactive wastes stored in geologic formations. This document presents the theoretical basis for the mathematical models, the finite element formulation and solution procedure of the program, a description of the input data for the program, verification problems, and details about program support and continuing documentation. The computer code documentation is intended to satisfy the requirements and guidelines outlined in the document entitled Final Technical Position on Documentation of Computer Codes for High-Level Waste Management. The principal component models used in the program involve thermoelastic, thermoviscoelastic, thermoelastic-plastic, and thermoviscoplastic types of material behavior. Special material considerations provide for the incorporation of limited-tension material behavior and consideration of jointed material behavior. Numerous program options provide the capabilities for various boundary conditions, sliding interfaces, excavation, backfill, arbitrary initial stresses, multiple material domains, load incrementation, plotting database storage and access of results, and other features unique to the geologic disposal of radioactive wastes. Numerous verification problems that exercise many of the program options and illustrate the required data input and printed results are included in the documentation

  13. Culturally Relevant Cyberbullying Prevention

    OpenAIRE

    Phillips, Gregory John

    2017-01-01

    In this action research study, I, along with a student intervention committee of 14 members, developed a cyberbullying intervention for a large urban high school on the west coast. This high school contained a predominantly African American student population. I aimed to discover culturally relevant cyberbullying prevention strategies for African American students. The intervention committee selected video safety messages featuring African American actors as the most culturally relevant cyber...

  14. Documentation for The Group for High Resolution Sea Surface Temperature (GHRSST) data archived at NCEI (NCEI Accession 0123222)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Group for High Resolution Sea Surface Temperature (GHRSST) is an international open group for SST data producers, users, and scientists. It brings together...

  15. The Study of Factors Relevant to Skin Cancer Preventive Behavior in Female High School Students in Yazd Based on Protection Motivation Theory

    OpenAIRE

    mohammad hosein baghiyanimoghadam; soheila mohammadi; mohammad taghi norbala; seed saeed mazlomi

    2010-01-01

    Introduction: Skin cancer is the most prevalent type of cancer in Yazd, and childhood and adolescence are particularly important time for preventing later skin cancer risk. The goal of this study is to assess the factors relevant to skin cancer preventive behavior in female high school students in Yazd based on protection motivation theory. Methods: Participants in this cross- sectional study were 360 female students from 4 high schools in Yazd. Data were gathered through a self- report quest...

  16. Interfaces between transport and geologic disposal systems for high-level radioactive wastes and spent nuclear fuel: A new international guidance document

    International Nuclear Information System (INIS)

    Pope, R.B.; Baekelandt, L.; Hoorelbeke, J.M.; Han, K.W.; Pollog, T.; Blackman, D.; Villagran, J.E.

    1994-01-01

    An International Atomic Energy Agency (IAEA) Technical Document (TECDOC) has been developed and will be published by the IAEA. The TECDOC addresses the interfaces between the transport and geologic disposal systems for, high-level waste (HLW) and spent nuclear fuel (SNF). The document is intended to define and assist in discussing, at both the domestic and the international level, regulatory, technical, administrative, and institutional interfaces associated with HLW and SNF transport and disposal systems; it identifies and discusses the interfaces and interface requirements between the HLW and SNF, the waste transport system used for carriage of the waste to the disposal facility, and the HLW/SNF disposal facility. It provides definitions and explanations of terms; discusses systems, interfaces and interface requirements; addresses alternative strategies (single-purpose packages and multipurpose packages) and how interfaces are affected by the strategies; and provides a tabular summary of the requirements

  17. Does Guiding Toward Task-Relevant Information Help Improve Graph Processing and Graph Comprehension of Individuals with Low or High Numeracy? An Eye-Tracker Experiment.

    Science.gov (United States)

    Keller, Carmen; Junghans, Alex

    2017-11-01

    Individuals with low numeracy have difficulties with understanding complex graphs. Combining the information-processing approach to numeracy with graph comprehension and information-reduction theories, we examined whether high numerates' better comprehension might be explained by their closer attention to task-relevant graphical elements, from which they would expect numerical information to understand the graph. Furthermore, we investigated whether participants could be trained in improving their attention to task-relevant information and graph comprehension. In an eye-tracker experiment ( N = 110) involving a sample from the general population, we presented participants with 2 hypothetical scenarios (stomach cancer, leukemia) showing survival curves for 2 treatments. In the training condition, participants received written instructions on how to read the graph. In the control condition, participants received another text. We tracked participants' eye movements while they answered 9 knowledge questions. The sum constituted graph comprehension. We analyzed visual attention to task-relevant graphical elements by using relative fixation durations and relative fixation counts. The mediation analysis revealed a significant ( P attention to task-relevant information, which did not differ between the 2 conditions. Training had a significant main effect on visual attention ( P attention to task-relevant graphical elements than individuals with low numeracy. With appropriate instructions, both groups can be trained to improve their graph-processing efficiency. Future research should examine (e.g., motivational) mediators between visual attention and graph comprehension to develop appropriate instructions that also result in higher graph comprehension.

  18. High School Longitudinal Study of 2009 (HSLS:09): Base-Year Data File Documentation. NCES 2011-328

    Science.gov (United States)

    Ingels, Steven J.; Pratt, Daniel J.; Herget, Deborah R.; Burns, Laura J.; Dever, Jill A.; Ottem, Randolph; Rogers, James E.; Jin, Ying; Leinwand, Steve

    2011-01-01

    The High School Longitudinal Study of 2009 (HSLS:09) is the fifth in a series of National Center for Education Statistics (NCES) secondary longitudinal studies. The core research questions for HSLS:09 explore secondary to postsecondary transition plans and the evolution of those plans; the paths into and out of science, technology, engineering,…

  19. Securing XML Documents

    Directory of Open Access Journals (Sweden)

    Charles Shoniregun

    2004-11-01

    Full Text Available XML (extensible markup language is becoming the current standard for establishing interoperability on the Web. XML data are self-descriptive and syntax-extensible; this makes it very suitable for representation and exchange of semi-structured data, and allows users to define new elements for their specific applications. As a result, the number of documents incorporating this standard is continuously increasing over the Web. The processing of XML documents may require a traversal of all document structure and therefore, the cost could be very high. A strong demand for a means of efficient and effective XML processing has posed a new challenge for the database world. This paper discusses a fast and efficient indexing technique for XML documents, and introduces the XML graph numbering scheme. It can be used for indexing and securing graph structure of XML documents. This technique provides an efficient method to speed up XML data processing. Furthermore, the paper explores the classification of existing methods impact of query processing, and indexing.

  20. Industry-relevant magnetron sputtering and cathodic arc ultra-high vacuum deposition system for in situ x-ray diffraction studies of thin film growth using high energy synchrotron radiation.

    Science.gov (United States)

    Schroeder, J L; Thomson, W; Howard, B; Schell, N; Näslund, L-Å; Rogström, L; Johansson-Jõesaar, M P; Ghafoor, N; Odén, M; Nothnagel, E; Shepard, A; Greer, J; Birch, J

    2015-09-01

    We present an industry-relevant, large-scale, ultra-high vacuum (UHV) magnetron sputtering and cathodic arc deposition system purposefully designed for time-resolved in situ thin film deposition/annealing studies using high-energy (>50 keV), high photon flux (>10(12) ph/s) synchrotron radiation. The high photon flux, combined with a fast-acquisition-time (film formation processes. The high-energy synchrotron-radiation based x-rays result in small scattering angles (industry-relevant processes. We openly encourage the materials research community to contact us for collaborative opportunities using this unique and versatile scientific instrument.

  1. Approaches in highly parameterized inversion: bgaPEST, a Bayesian geostatistical approach implementation with PEST: documentation and instructions

    Science.gov (United States)

    Fienen, Michael N.; D'Oria, Marco; Doherty, John E.; Hunt, Randall J.

    2013-01-01

    The application bgaPEST is a highly parameterized inversion software package implementing the Bayesian Geostatistical Approach in a framework compatible with the parameter estimation suite PEST. Highly parameterized inversion refers to cases in which parameters are distributed in space or time and are correlated with one another. The Bayesian aspect of bgaPEST is related to Bayesian probability theory in which prior information about parameters is formally revised on the basis of the calibration dataset used for the inversion. Conceptually, this approach formalizes the conditionality of estimated parameters on the specific data and model available. The geostatistical component of the method refers to the way in which prior information about the parameters is used. A geostatistical autocorrelation function is used to enforce structure on the parameters to avoid overfitting and unrealistic results. Bayesian Geostatistical Approach is designed to provide the smoothest solution that is consistent with the data. Optionally, users can specify a level of fit or estimate a balance between fit and model complexity informed by the data. Groundwater and surface-water applications are used as examples in this text, but the possible uses of bgaPEST extend to any distributed parameter applications.

  2. Estimating chlorophyll with thermal and broadband multispectral high resolution imagery from an unmanned aerial system using relevance vector machines for precision agriculture

    Science.gov (United States)

    Elarab, Manal; Ticlavilca, Andres M.; Torres-Rua, Alfonso F.; Maslova, Inga; McKee, Mac

    2015-12-01

    Precision agriculture requires high-resolution information to enable greater precision in the management of inputs to production. Actionable information about crop and field status must be acquired at high spatial resolution and at a temporal frequency appropriate for timely responses. In this study, high spatial resolution imagery was obtained through the use of a small, unmanned aerial system called AggieAirTM. Simultaneously with the AggieAir flights, intensive ground sampling for plant chlorophyll was conducted at precisely determined locations. This study reports the application of a relevance vector machine coupled with cross validation and backward elimination to a dataset composed of reflectance from high-resolution multi-spectral imagery (VIS-NIR), thermal infrared imagery, and vegetative indices, in conjunction with in situ SPAD measurements from which chlorophyll concentrations were derived, to estimate chlorophyll concentration from remotely sensed data at 15-cm resolution. The results indicate that a relevance vector machine with a thin plate spline kernel type and kernel width of 5.4, having LAI, NDVI, thermal and red bands as the selected set of inputs, can be used to spatially estimate chlorophyll concentration with a root-mean-squared-error of 5.31 μg cm-2, efficiency of 0.76, and 9 relevance vectors.

  3. Extremely secure identification documents

    International Nuclear Information System (INIS)

    Tolk, K.M.; Bell, M.

    1997-09-01

    The technology developed in this project uses biometric information printed on the document and public key cryptography to ensure that an adversary cannot issue identification documents to unauthorized individuals or alter existing documents to allow their use by unauthorized individuals. This process can be used to produce many types of identification documents with much higher security than any currently in use. The system is demonstrated using a security badge as an example. This project focused on the technologies requiring development in order to make the approach viable with existing badge printing and laminating technologies. By far the most difficult was the image processing required to verify that the picture on the badge had not been altered. Another area that required considerable work was the high density printed data storage required to get sufficient data on the badge for verification of the picture. The image processing process was successfully tested, and recommendations are included to refine the badge system to ensure high reliability. A two dimensional data array suitable for printing the required data on the badge was proposed, but testing of the readability of the array had to be abandoned due to reallocation of the budgeted funds by the LDRD office

  4. Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 5. Life Academy of Health and Bioscience

    Science.gov (United States)

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  5. Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 7. TechBoston Academy

    Science.gov (United States)

    Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

    2008-01-01

    This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…

  6. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 6

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The scope of the Environmental Restoration and Waste Management (EM) Functional Area includes the programmatic controls associated with the management and operation of the Hanford Tank Farm Facility. The driving management organization implementing the programmatic controls is the Tank Farms Waste Management (WM)organization whose responsibilities are to ensure that performance objectives are established; and that measurable criteria for attaining objectives are defined and reflected in programs, policies and procedures. Objectives for the WM Program include waste minimization, establishment of effective waste segregation methods, waste treatment technology development, radioactive (low-level, high-level) hazardous and mixed waste transfer, treatment, and storage, applicability of a corrective action program, and management and applicability of a decontamination and decommissioning (D&D) program in future years.

  7. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 6

    International Nuclear Information System (INIS)

    1994-04-01

    The scope of the Environmental Restoration and Waste Management (EM) Functional Area includes the programmatic controls associated with the management and operation of the Hanford Tank Farm Facility. The driving management organization implementing the programmatic controls is the Tank Farms Waste Management (WM)organization whose responsibilities are to ensure that performance objectives are established; and that measurable criteria for attaining objectives are defined and reflected in programs, policies and procedures. Objectives for the WM Program include waste minimization, establishment of effective waste segregation methods, waste treatment technology development, radioactive (low-level, high-level) hazardous and mixed waste transfer, treatment, and storage, applicability of a corrective action program, and management and applicability of a decontamination and decommissioning (D ampersand D) program in future years

  8. Documentation of normal and leukemic myelopoietic progenitor cells with high-resolution phase-contrast time-lapse cinematography.

    Science.gov (United States)

    Boll, I T

    2001-08-01

    The high-resolution phase-contrast, time-lapse cinematography using oil immersion lenses and 16-mm film demonstrates the kinetic cell events as maturation, locomotion, mitosis, and apoptosis of cells cultivated at 37 degrees C for up to 10 days. 0.5 v/v frozen-thawed sera with presumably high cytokine concentrations were added to the plasma or agar clot. Vital progenitor cells from human bone marrow and blood have a large, bright, unstructured nucleus with a large nucleolus and a narrow rim of cytoplasm (nuclear/cytoplasmic volume ratio = 0.7). Their nuclei are 6-14 micrometer in diameter and double their volume within 8 h. Many (70%) move at a mean speed of 2 micrometer/min, and many (30%) multiply with alpha-2alpha mitoses, generating progenitor cell families. Various disturbances during the course of mitosis lead to the formation of polyploid cells, thereby yielding the megakaryocytic cell line. Some of the progenitor cells undergo asymmetric alpha-alphan mitoses: One of the two initially identical daughter cells remains a progenitor cell in the morphological sense, whereas the other daughter cell - depending on the size of its mother cell - matures in the same culture medium to form a granulocytopoietic, monocytopoietic or erythrocytopoietic cell line. - In acute myeloid leukemias (AML), the blasts and their nuclei are slightly larger than the corresponding progenitor cells and move faster (5 micrometer/min). Symmetric alpha-2alpha mitoses permit unlimited multiplication of the leukemic blasts if contact with cytotoxic lymphocytes does not render them apoptotic. This results in more stromal cells than normal. Granulocytopenia, monocytopenia, and anemia occur due to the genetic impairment of signaling control for asymmetric alpha-alphan mitoses, and thrombocytopenia occurs due to the reduction in polyploidization. Copyright 2001 S. Karger GmbH, Freiburg

  9. The flip-over effect in pulsed laser deposition: Is it relevant at high background gas pressures?

    Science.gov (United States)

    Ojeda-G-P, Alejandro; Schneider, Christof W.; Döbeli, Max; Lippert, Thomas; Wokaun, Alexander

    2015-12-01

    In pulsed laser deposition the use of a rectangular or elliptical beam spot with a non 1:1 aspect ratio leads to the so called flip-over effect. Here, the longest dimension of the laser spot results in the shortest direction of plasma plume expansion. This effect has been mainly reported for vacuum depositions of single element targets and is particularly noticeable when the aspect ratio of the beam spot is large. We investigate the flip-over effect in vacuum and at three relevant background-gas pressures for pulsed laser deposition using a La0.4Ca0.6MnO3 target by measuring the thickness dependence of the deposited material as a function of angle. The film thicknesses and compositions are determined by Rutherford backscattering and argon is used to reduce the influence of additional chemical reactions in the plasma. The results show the prevalence of the flip-over effect for all pressures except for the highest, i.e. 1 × 10-1 mbar, where the film thickness is constant for all angles. The composition profiles show noticeable compositional variations of up to 30% with respect to the target material depending on the background gas pressure, the angular location, and the laser spot dimensions.

  10. Surface water processes in the Indonesian throughflow as documented by a high-resolution coral Δ14C record

    Science.gov (United States)

    Fallon, Stewart J.; Guilderson, Thomas P.

    2008-09-01

    To explore the seasonal to decadal variability in surface water masses that contribute to the Indonesian throughflow, we have generated a 115-year bimonthly coral-based radiocarbon time series from a coral in the Makassar Straits. In the pre-bomb (pre-1955) era from 1890 to 1954, the radiocarbon time series occasionally displays a small seasonal signal (10-15‰). After 1954 the radiocarbon record increases rapidly, in response to the increased atmospheric 14C content caused by nuclear weapons testing. From 1957 to 1986 the record displays clear seasonal variability from 15 to 60‰ and the post-bomb peak (163 per mil) occurred in 1974. The seasonal cycle of radiocarbon can be attributed to variations of surface waters passing through the South Makassar Strait. Southern Makassar is under the influence of the Northwest Monsoon, which is responsible for the high austral summer radiocarbon (North Pacific waters) and the Southeast Monsoon that flushes back a mixture of low (South Pacific and upwelling altered) radiocarbon water from the Banda Sea. The coral record also shows a significant 14C peak in 1955 due to the bomb-14C water advected into this region from nuclear weapons tests in the Marshall Islands in 1954.

  11. The impact of positive, negative and topical relevance feedback

    NARCIS (Netherlands)

    Kaptein, Rianne; Kamps, Jaap; Hiemstra, Djoerd

    2008-01-01

    This document contains a description of experiments for the 2008 Relevance Feedback track. We experiment with different amounts of feedback, including negative relevance feedback. Feedback is implemented using massive weighted query expansion. Parsimonious query expansion using only relevant

  12. Working document dispersion models

    International Nuclear Information System (INIS)

    Dop, H. van

    1988-01-01

    This report is a summary of the most important results from June 1985 of the collaboration of the RIVM (Dutch National Institute for Public Health and Environment Hygiene) and KNMI (Royal Dutch Meteorologic Institute) on the domain of dispersion models. It contains a short description of the actual SO x /NO x -model. Furthermore it contains recommendations for modifications of some numerical-mathematical aspects and an impulse to a more complete description of chemical processes in the atmosphere and the (wet) deposition process. A separate chapter is devoted to the preparation of meteorologic data which are relevant for dispersion as well as atmospheric chemistry and deposition. This report serves as working document for the final formulation of a acidifying- and oxidant-model. (H.W.). 69 refs.; 51 figs.; 13 tabs.; 3 schemes

  13. Integrated criteria document mercury

    International Nuclear Information System (INIS)

    Sloof, W.; Beelan, P. van; Annema, J.A.; Janus, J.A.

    1995-01-01

    The document contains a systematic review and a critical evaluation of the most relevant data on the priority substance mercury for the purpose of effect-oriented environmental policy. Chapter headings are: properties and existing standards; production, application, sources and emissions (natural sources, industry, energy, households, agriculture, dental use, waste); distribution and transformation (cinnabar; Hg 2+ , Hg 2 2+ , elemental mercury, methylmercury, behavior in soil, water, air, biota); concentrations and fluxes in the environment and exposure levels (sampling and measuring methods, occurrence in soil, water, air etc.); effects (toxicity to humans and aquatic and terrestrial systems); emissions reduction (from industrial sources, energy, waste processing etc.); and evaluation (risks, standards, emission reduction objectives, measuring strategies). 395 refs

  14. A novel, ecologically relevant, highly preferred, and non-invasive means of oral substance administration for rodents.

    Science.gov (United States)

    Sobolewski, Marissa; Allen, Joshua L; Morris-Schaffer, Keith; Klocke, Carolyn; Conrad, Katherine; Cory-Slechta, Deborah A

    2016-01-01

    Prenatal stress and nutrition are well-known to alter a broad range of physiological systems, notably metabolic, endocrine and neurobehavioral function. Commonly used methods for oral administration of xenobiotics can, by acting as a stressor or altering normal nutrition intake, alter these physiological systems as well. Taken together, oral administration methods may unintentionally introduce confounding physiological effects that can mask or enhance toxicity of xenobiotics, particularly if they share biological targets. Consequently, it should be preferable to develop alternative methods without these potential confounds. The aim of this study was to determine the suitability of mealworms as an alternative treat-based method to deliver xenobiotics via the orogastric route. Accurate oral administration is contingent on motivation and preference; mice reliably preferred mealworms over wafer cookie treats. Further, ingestion of wafer cookies significantly increased mouse blood glucose levels, whereas unaltered mealworms produced no such change. Mealworms functioned effectively to orally administer glucose, as glucose-spiked mealworms produced a rise in blood glucose equivalent to the ingestion of the wafer cookie. Mealworms did not interfere with the physiological function of orally administered d-amphetamine, as both mealworm and oral gavage administered d-amphetamine showed similar alterations in locomotor behavior (mice did not fully consume d-amphetamine-dosed cookies and thus could not be compared). Collectively, the findings indicate that mealworms are a preferred and readily consumed treat, which importantly mimics environmental-relevant nutritional intake, and mealworms per se do not alter glucose metabolic pathways. Additionally, mealworms accurately delivered xenobiotics into blood circulation and did not interfere with the physiological function of administered xenobiotics. Thus mealworm-based oral administration may be a preferable and accurate route of

  15. Studies of Corrosion Resistant Materials Being Considered for High-Level Nuclear Waste Containment in Yucca Mountain Relevant Environments

    International Nuclear Information System (INIS)

    McCright, R.D.; Ilevbare, G.; Estill, J.; Rebak, R.

    2001-01-01

    Containment of spent nuclear fuel and vitrified forms of high level nuclear waste require use of materials that are highly corrosion resistant to all of the anticipated environmental scenarios that can occur in a geological repository. Ni-Cr-Mo Alloy 22 (UNS N60622) is proposed for the corrosion resistant outer barrier of a two-layer waste package container at the potential repository site at Yucca Mountain. A range of water compositions that may contact the outer barrier is under consideration, and a testing program is underway to characterize the forms of corrosion and to quantify the corrosion rates. Results from the testing support models for long term prediction of the performance of the container. Results obtained to date indicate a very low general corrosion rate for Alloy 22 and very high resistance to all forms of localized and environmentally assisted cracking in environments tested to date

  16. Relevant Subspace Clustering

    DEFF Research Database (Denmark)

    Müller, Emmanuel; Assent, Ira; Günnemann, Stephan

    2009-01-01

    Subspace clustering aims at detecting clusters in any subspace projection of a high dimensional space. As the number of possible subspace projections is exponential in the number of dimensions, the result is often tremendously large. Recent approaches fail to reduce results to relevant subspace...... clusters. Their results are typically highly redundant, i.e. many clusters are detected multiple times in several projections. In this work, we propose a novel model for relevant subspace clustering (RESCU). We present a global optimization which detects the most interesting non-redundant subspace clusters...... achieves top clustering quality while competing approaches show greatly varying performance....

  17. ExactPack Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Singleton, Robert Jr. [Los Alamos National Laboratory; Israel, Daniel M. [Los Alamos National Laboratory; Doebling, Scott William [Los Alamos National Laboratory; Woods, Charles Nathan [Los Alamos National Laboratory; Kaul, Ann [Los Alamos National Laboratory; Walter, John William Jr [Los Alamos National Laboratory; Rogers, Michael Lloyd [Los Alamos National Laboratory

    2016-05-09

    For code verification, one compares the code output against known exact solutions. There are many standard test problems used in this capacity, such as the Noh and Sedov problems. ExactPack is a utility that integrates many of these exact solution codes into a common API (application program interface), and can be used as a stand-alone code or as a python package. ExactPack consists of python driver scripts that access a library of exact solutions written in Fortran or Python. The spatial profiles of the relevant physical quantities, such as the density, fluid velocity, sound speed, or internal energy, are returned at a time specified by the user. The solution profiles can be viewed and examined by a command line interface or a graphical user interface, and a number of analysis tools and unit tests are also provided. We have documented the physics of each problem in the solution library, and provided complete documentation on how to extend the library to include additional exact solutions. ExactPack’s code architecture makes it easy to extend the solution-code library to include additional exact solutions in a robust, reliable, and maintainable manner.

  18. Critical current densities amd pinning mechanisms of high-Tc films on single crystalline and technologically relevant substrates. Final report

    International Nuclear Information System (INIS)

    Adrian, H.

    1995-12-01

    The report deals with six project tasks: (1) Effects of impurity additions at atomic level on the pinning behaviour and the critical current densities, examined in epitactic YBA 2 (Cu 1-x Ni x ) 3 O 7 films. It could be proven that the Ni atoms increase the activation energy for flux movement and the critical current density in a concentration range of 0 2 Sr 2 Ca n-1 Cu n O 2n+4+δ films (n = 2 and 3) with good crystalline properties, high critical currents, and high current densities were prepared. Thin YBa 2 Cu 3 O 7 films of high quality could be grown on saphire substrates, both by the MO-CVD process and by MBE. The aim of depositing biaxially textured YBa 2 Cu 3 O 7 films with high critical current densities on polycrystalline, metallic substrates was achieved by the IBAD process combined with MBE. The buffer layer was YSZ. Heterostructures of the layer sequence YBa 2 Cu 3 O 7 /CeO 2 /Y 0.3 Pr 0.7 Ba 2 Cu 3 O 7 /YBa 2 Cu 3 O 7 and YBa 2 Cu 3 O 7 /CeO 2 /Au were prepared by laser ablation and sputtering processes, in order to examine Josephson ramp contacts and superconducting field-effect transistors. (orig./MM) [de

  19. A physical detail relevant to the Savic-Kasanin theory of behaviour of materials under high pressure

    International Nuclear Information System (INIS)

    Celebonovic, V.

    1982-01-01

    P. Savic and R. Kasanin have proposed a theory of behaviour of materials under high pressure (Savic, 1981). Their theory can be applied to the explanation of the internal structures of planets and stars. The author proposes, a simple method for the calculation of the internal temperatures of the terrestrial planets. All the parameters needed for the application of the method can be obtained from the SK theory. (Auth.)

  20. Genomic analysis of the aconidial and high-performance protein producer, industrially relevant Aspergillus niger SH2 strain.

    Science.gov (United States)

    Yin, Chao; Wang, Bin; He, Pan; Lin, Ying; Pan, Li

    2014-05-15

    Aspergillus niger is usually regarded as a beneficial species widely used in biotechnological industry. Obtaining the genome sequence of the widely used aconidial A. niger SH2 strain is of great importance to understand its unusual production capability. In this study we assembled a high-quality genome sequence of A. niger SH2 with approximately 11,517 ORFs. Relatively high proportion of genes enriched for protein expression related FunCat items verify its efficient capacity in protein production. Furthermore, genome-wide comparative analysis between A. niger SH2 and CBS513.88 reveals insights into unique properties of A. niger SH2. A. niger SH2 lacks the gene related with the initiation of asexual sporulation (PrpA), leading to its distinct aconidial phenotype. Frame shift mutations and non-synonymous SNPs in genes of cell wall integrity signaling, β-1,3-glucan synthesis and chitin synthesis influence its cell wall development which is important for its hyphal fragmentation during industrial high-efficiency protein production. Copyright © 2014 Elsevier B.V. All rights reserved.

  1. Influence of heat treatment and indenter tip material on depth sensing hardness tests at high temperatures of fusion relevant materials

    International Nuclear Information System (INIS)

    Bredl, Julian; Dany, Manuel; Albinski, Bartlomiej; Schneider, Hans-Christian; Kraft, Oliver

    2015-01-01

    Highlights: • Operation of a custom-made indentation device designed for test temperatures up to 650 °C and a remote handled operation in a Hot Cell. • Instrumented indentation and conventional hardness testing of unirradiated MANET II and EUROFER. • Comparison of diamond and sapphire as indenter tip materials. - Abstract: The instrumented indentation is a suitable method for testing of even small neutron-irradiated specimens. From the continuously recorded indentation depth and the indentation force, it is possible to deduce mechanical parameters of the tested material. In this paper, a brief description of the high temperature device is given and representative results are presented. In the study, unirradiated steels are investigated by instrumented indentation at temperatures up to 500 °C. It is shown that the hardness is highly depending on the testing-temperature and can be correlated to the results of conventional tensile testing experiments. A not negligible influence of the indenter tip material is observed. The results show the functionality of the high-temperature indentation device.

  2. Influence of heat treatment and indenter tip material on depth sensing hardness tests at high temperatures of fusion relevant materials

    Energy Technology Data Exchange (ETDEWEB)

    Bredl, Julian, E-mail: julian.bredl@kit.edu; Dany, Manuel; Albinski, Bartlomiej; Schneider, Hans-Christian; Kraft, Oliver

    2015-10-15

    Highlights: • Operation of a custom-made indentation device designed for test temperatures up to 650 °C and a remote handled operation in a Hot Cell. • Instrumented indentation and conventional hardness testing of unirradiated MANET II and EUROFER. • Comparison of diamond and sapphire as indenter tip materials. - Abstract: The instrumented indentation is a suitable method for testing of even small neutron-irradiated specimens. From the continuously recorded indentation depth and the indentation force, it is possible to deduce mechanical parameters of the tested material. In this paper, a brief description of the high temperature device is given and representative results are presented. In the study, unirradiated steels are investigated by instrumented indentation at temperatures up to 500 °C. It is shown that the hardness is highly depending on the testing-temperature and can be correlated to the results of conventional tensile testing experiments. A not negligible influence of the indenter tip material is observed. The results show the functionality of the high-temperature indentation device.

  3. The HAW project. Test storage of high-level radiation sources in the Asse salt mine. Documentation and assessment of the storage system

    International Nuclear Information System (INIS)

    Mueller, K.; Rothfuchs, T.

    1994-01-01

    The HAW project aimed primarily at studying the interaction between high-level radioactive waste moulds and rock salt as the respository medium. Another priority was the prototype development and testing of a technical system for the emplacement of high-level radioactive moulds in deep storage boreholes. To simulate real high-level radioactive wastes, special high-level radiation sources (Cs-137, Sr-90) were produced in the United States of America under a German-American cooperation contract, for carrying out the tests at the Asse salt mine. The components of the storage system are described, their position and task within the entire handling procedure explained. Questions of radiation protection and accident protection, of functioning and operating reliability, of quality assurance and examination of documents, materials, of manufacture and functioning, and of documentation are dealt with in detail. With a view to the planning of storage techniques for a mine respository, the experience of development and operation is recorded, and recommendation of further developments are given. Problems which arose during work on the HAW project were partly due to test-specific reasons and will not or not in this form occur in a mine respository. It was planned to start the test emplacement in 1987, and it could have been executed in 1993 after appropriate preparation and approval of the storage system by the mining authority and the Hanover TUEV in 1991. In December 1992, however, the Federal Government decided to give up to the project due to the uncertain licensing situation, and to immediately stop all preparatory work. (orig./HP) [de

  4. Prospective early detection of avascular necrosis of the femoral head with MR imaging in high-risk patients: Is it clinically relevant

    International Nuclear Information System (INIS)

    Von Schulthess, G.K.; Binswanger, U.

    1987-01-01

    To evaluate the clinical relevance of early detection of avascular necrosis (AVN) of the femoral head in a high-risk group, the authors performed MR imaging in 16 renal transplant patients receiving prednisone. Imaging was done at 3-month intervals over 8-24 months. Of the 15 patients remaining in the study (one underwent nephrectomy), two have shown clear MR imaging signs of early AVN persisting for 12 months without clinical symptoms. One patient had an abrupt onset of clinically relevant AVN before the second control MR imaging study was done. These results suggest that MR imaging may detect clinically irrelevant AVN, and that even short intervals between examinations may be too long to provide a warning of impending AVN

  5. Two approaches to the reactor-relevant high-beta plasmas with profile control in the Large Helical Device

    International Nuclear Information System (INIS)

    Ohdachi, S.; Watanabe, K.Y.; Sakakibara, S.

    2008-10-01

    From detailed optimization of configuration, volume averaged beta ∼ 5% has been achieved in the Large Helical Device(LHD). While the heating efficiency was the main point to be optimized in this approach, to form a more peaked pressure profile is another promising approach towards the high beta regime. A higher electron density profile with a steeper pressure gradient has been formed by pellet injection. From the MHD stability analysis, this peaked pressure profile is stable against the ideal MHD modes. By both approaches, the central plasma β 0 reaches about 10%. (author)

  6. Microbial impacts on 99mTc migration through sandstone under highly alkaline conditions relevant to radioactive waste disposal.

    Science.gov (United States)

    Smith, Sarah L; Boothman, Christopher; Williams, Heather A; Ellis, Beverly L; Wragg, Joanna; West, Julia M; Lloyd, Jonathan R

    2017-01-01

    Geological disposal of intermediate level radioactive waste in the UK is planned to involve the use of cementitious materials, facilitating the formation of an alkali-disturbed zone within the host rock. The biogeochemical processes that will occur in this environment, and the extent to which they will impact on radionuclide migration, are currently poorly understood. This study investigates the impact of biogeochemical processes on the mobility of the radionuclide technetium, in column experiments designed to be representative of aspects of the alkali-disturbed zone. Results indicate that microbial processes were capable of inhibiting 99m Tc migration through columns, and X-ray radiography demonstrated that extensive physical changes had occurred to the material within columns where microbiological activity had been stimulated. The utilisation of organic acids under highly alkaline conditions, generating H 2 and CO 2 , may represent a mechanism by which microbial processes may alter the hydraulic conductivity of a geological environment. Column sediments were dominated by obligately alkaliphilic H 2 -oxidising bacteria, suggesting that the enrichment of these bacteria may have occurred as a result of H 2 generation during organic acid metabolism. The results from these experiments show that microorganisms are able to carry out a number of processes under highly alkaline conditions that could potentially impact on the properties of the host rock surrounding a geological disposal facility for intermediate level radioactive waste. Copyright © 2016. Published by Elsevier B.V.

  7. Rationale set of indicators and prioritize relevant to assess competitive activity of hockey players of high qualification of different roles

    Directory of Open Access Journals (Sweden)

    A.P. Mikhnov

    2015-02-01

    Full Text Available Purpose: organize technical and tactical actions and determine their priority importance for high-end players of different roles. Establish their priority importance for the success of competitive activity hockey with the game roles. Material : the study involved 54 experts on hockey coaches and players of high class. The significance of technical and tactical actions evaluated for players of different roles. Results : systematic account of technical and tactical actions of athletes and prioritize them to assess the significance of competitive activity. Three groups of technical and tactical actions: 1 active attacks; 2 - active safety; 3 - organizational and maneuvering. Set priorities for technical and tactical actions for players of different roles. Conclusions : the proposed technical and tactical actions can be recommended for the evaluation of the effectiveness of competitive activity players. In the process of estimating the action game players need to consider their role playing. Identification of priority in the implementation of technical and tactical actions in the game can be used in integrated assessment of actions players different roles.

  8. Recycling cellulases for cellulosic ethanol production at industrial relevant conditions: potential and temperature dependency at high solid processes.

    Science.gov (United States)

    Lindedam, Jane; Haven, Mai Østergaard; Chylenski, Piotr; Jørgensen, Henning; Felby, Claus

    2013-11-01

    Different versions of two commercial cellulases were tested for their recyclability of enzymatic activity at high dry matter processes (12% or 25% DM). Recyclability was assessed by measuring remaining enzyme activity in fermentation broth and the ability of enzymes to hydrolyse fresh, pretreated wheat straw. Industrial conditions were used to study the impact of hydrolysis temperature (40 or 50°C) and residence time on recyclability. Enzyme recycling at 12% DM indicated that hydrolysis at 50°C, though ideal for ethanol yield, should be kept short or carried out at lower temperature to preserve enzymatic activity. Best results for enzyme recycling at 25% DM was 59% and 41% of original enzyme load for a Celluclast:Novozyme188 mixture and a modern cellulase preparation, respectively. However, issues with stability of enzymes and their strong adsorption to residual solids still pose a challenge for applicable methods in enzyme recycling. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. A set of high quality colour images with Spanish norms for seven relevant psycholinguistic variables: the Nombela naming test.

    Science.gov (United States)

    Moreno-Martinez, Francisco Javier; Montoro, Pedro R; Laws, Keith R

    2011-05-01

    This paper presents a new corpus of 140 high quality colour images belonging to 14 subcategories and covering a range of naming difficulty. One hundred and six Spanish speakers named the items and provided data for several psycholinguistic variables: age of acquisition, familiarity, manipulability, name agreement, typicality and visual complexity. Furthermore, we also present lexical frequency data derived internet search hits. Apart from the large number of variables evaluated, these stimuli present an important advantage with respect to other comparable image corpora in so far as naming performance in healthy individuals is less prone to ceiling effect problems. Reliability and validity indexes showed that our items display similar psycholinguistic characteristics to those of other corpora. In sum, this set of ecologically valid stimuli provides a useful tool for scientists engaged in cognitive and neuroscience-based research.

  10. Fish movement ecology in high gradient headwater streams: Its relevance to fish passage restoration through stream culvert barriers

    Science.gov (United States)

    Hoffman, Robert L.; Dunham, Jason B.

    2007-01-01

    Restoration of fish passage through culvert barriers has emerged as a major issue in the Pacific Northwest and nationwide, in part, because of their potential influence on fish movement. Movement is an essential mechanism by which mobile animals acquire the resources necessary for the successful completion of their life-cycles. In this report, we provide a brief review of some essential characteristics of animal movement and examples from a focal group of fishes in Washington State: salmon, trout, and char. We begin by outlining some basic characteristics of animal movement and then apply that foundation to the case of salmonid fishes. Next we consider the consequences of disrupting fish movement with human-constructed barriers, such as culverts. Finally, this body of evidence is summarized, and we propose a short list of what we view as high priority information needs to support more effective restoration of fish passage through culverts.

  11. Development of two highly sensitive immunoassays for detection of copper ions and a suite of relevant immunochemicals

    International Nuclear Information System (INIS)

    Zhao Hongwei; Nan Tiegui; Tan Guiyu; Gao Wei; Cao Zhen; Sun Shuo; Li Zhaohu; Li, Qing X.; Wang Baomin

    2011-01-01

    Highlights: · Two highly sensitive immunoassays for determination of Cu(II) at sub ppb levels. · The heterologous competitive enzyme linked immunosorbent assay for heavy metals. · Haptenated protein directly conjugated with HRP can reduce the loss of HRP activity. - Abstract: Availability of highly sensitive assays for metal ions can help monitor and manage the environmental and food contamination. In the present study, a monoclonal antibody against Copper(II)-ethylenediaminetetraacetic acid was used to develop two sensitive ELISAs for Cu(II) analysis. Cobalt(II)-EDTA-BSA was the coating antigen in a heterologous indirect competitive ELISA (hicELISA), whereas Co(II)-EDTA-BSA-horseradish peroxidase (HRP) was the enzyme tracer in a heterologous direct competitive ELISA (hdcELISA). Both ELISAs were validated for detecting the content of Cu(II) in environmental waters. The ELISA data agreed well with those from graphite furnace atomic absorption spectroscopy. The methods of developing the Cu(II) hicELISA and hdcELISA are potentially applicable for developing ELISAs for other metals. The chelator-protein complexes such as EDTA-BSA and EDTA-BSA-HRP can form a suite of metal complexes having the consistent hapten density, location and orientation on the conjugates except the difference of the metal core, which can be used as ideal reagents to investigate the relationship between assay sensitivity and antibody affinities for the haptens and the analytes. The strategy of conjugating a haptenated protein directly with HRP can reduce the loss of HRP activity during the conjugation reaction and thus can be applicable for the development of ELISAs for small molecules.

  12. Development of two highly sensitive immunoassays for detection of copper ions and a suite of relevant immunochemicals

    Energy Technology Data Exchange (ETDEWEB)

    Zhao Hongwei [College of Agronomy and Biotechnology, China Agricultural University, Beijing 100193 (China); Department of Molecular Biosciences and Bioengineering, University of Hawaii at Manoa, Honolulu, HI 96822 (United States); Nan Tiegui; Tan Guiyu; Gao Wei; Cao Zhen; Sun Shuo; Li Zhaohu [College of Agronomy and Biotechnology, China Agricultural University, Beijing 100193 (China); Li, Qing X., E-mail: qingl@hawaii.edu [Department of Molecular Biosciences and Bioengineering, University of Hawaii at Manoa, Honolulu, HI 96822 (United States); Wang Baomin, E-mail: wbaomin@263.com [College of Agronomy and Biotechnology, China Agricultural University, Beijing 100193 (China)

    2011-09-19

    Highlights: {center_dot} Two highly sensitive immunoassays for determination of Cu(II) at sub ppb levels. {center_dot} The heterologous competitive enzyme linked immunosorbent assay for heavy metals. {center_dot} Haptenated protein directly conjugated with HRP can reduce the loss of HRP activity. - Abstract: Availability of highly sensitive assays for metal ions can help monitor and manage the environmental and food contamination. In the present study, a monoclonal antibody against Copper(II)-ethylenediaminetetraacetic acid was used to develop two sensitive ELISAs for Cu(II) analysis. Cobalt(II)-EDTA-BSA was the coating antigen in a heterologous indirect competitive ELISA (hicELISA), whereas Co(II)-EDTA-BSA-horseradish peroxidase (HRP) was the enzyme tracer in a heterologous direct competitive ELISA (hdcELISA). Both ELISAs were validated for detecting the content of Cu(II) in environmental waters. The ELISA data agreed well with those from graphite furnace atomic absorption spectroscopy. The methods of developing the Cu(II) hicELISA and hdcELISA are potentially applicable for developing ELISAs for other metals. The chelator-protein complexes such as EDTA-BSA and EDTA-BSA-HRP can form a suite of metal complexes having the consistent hapten density, location and orientation on the conjugates except the difference of the metal core, which can be used as ideal reagents to investigate the relationship between assay sensitivity and antibody affinities for the haptens and the analytes. The strategy of conjugating a haptenated protein directly with HRP can reduce the loss of HRP activity during the conjugation reaction and thus can be applicable for the development of ELISAs for small molecules.

  13. Pharmacologically relevant intake during chronic, free-choice drinking rhythms in selectively bred high alcohol-preferring mice.

    Science.gov (United States)

    Matson, Liana M; Grahame, Nicholas J

    2013-11-01

    Multiple lines of high alcohol-preferring (HAP) mice were selectively bred for their intake of 10% ethanol (v/v) during 24-hour daily access over a 4-week period, with the highest drinking lines exhibiting intakes in excess of 20 g/kg/day. We observed circadian drinking patterns and resulting blood ethanol concentrations (BECs) in the HAP lines. We also compared the drinking rhythms and corresponding BECs of the highest drinking HAP lines to those of the C57BL/6J (B6) inbred strain. Adult male and female crossed HAP (cHAP), HAP replicate lines 1, 2, 3 and B6 mice had free-choice access to 10% ethanol and water for 3 weeks prior to bi-hourly assessments of intake throughout the dark portion of the light-dark cycle. All HAP lines reached and maintained a rate of alcohol intake above the rate at which HAP1 mice metabolize alcohol, and BECs were consistent with this finding. Further, cHAP and HAP1 mice maintained an excessive level of intake throughout the dark portion of the cycle, accumulating mean BEC levels of 261.5 ± 18.09 and 217.9 ± 25.02 mg/dl, respectively. B6 mice drank comparatively modestly, and did not accumulate high BEC levels (53.63 + 8.15 mg/dl). Free-choice drinking demonstrated by the HAP1 and cHAP lines may provide a unique opportunity for modeling the excessive intake that often occurs in alcohol-dependent individuals, and allow for exploration of predisposing factors for excessive consumption, as well as the development of physiological, behavioral and toxicological outcomes following alcohol exposure. © 2011 The Authors, Addiction Biology © 2011 Society for the Study of Addiction.

  14. Effect of dietary krill oil supplementation on the endocannabinoidome of metabolically relevant tissues from high-fat-fed mice

    Directory of Open Access Journals (Sweden)

    Cohn Jeffrey S

    2011-07-01

    Full Text Available Abstract Background Omega-3 polyunsaturated fatty acids (ω-3-PUFA are known to ameliorate several metabolic risk factors for cardiovascular disease, and an association between elevated peripheral levels of endogenous ligands of cannabinoid receptors (endocannabinoids and the metabolic syndrome has been reported. We investigated the dose-dependent effects of dietary ω-3-PUFA supplementation, given as krill oil (KO, on metabolic parameters in high fat diet (HFD-fed mice and, in parallel, on the levels, in inguinal and epididymal adipose tissue (AT, liver, gastrocnemius muscle, kidneys and heart, of: 1 the endocannabinoids, anandamide and 2-arachidonoylglycerol (2-AG, 2 two anandamide congeners which activate PPARα but not cannabinoid receptors, N-oleoylethanolamine and N-palmitoylethanolamine, and 3 the direct biosynthetic precursors of these compounds. Methods Lipids were identified and quantified using liquid chromatography coupled to atmospheric pressure chemical ionization single quadrupole mass spectrometry (LC-APCI-MS or high resolution ion trap-time of flight mass spectrometry (LC-IT-ToF-MS. Results Eight-week HFD increased endocannabinoid levels in all tissues except the liver and epididymal AT, and KO reduced anandamide and/or 2-AG levels in all tissues but not in the liver, usually in a dose-dependent manner. Levels of endocannabinoid precursors were also generally down-regulated, indicating that KO affects levels of endocannabinoids in part by reducing the availability of their biosynthetic precursors. Usually smaller effects were found of KO on OEA and PEA levels. Conclusions Our data suggest that KO may promote therapeutic benefit by reducing endocannabinoid precursor availability and hence endocannabinoid biosynthesis.

  15. Scope and limitations of high energy electron scattering in obtaining relevant structural information about atoms and molecules

    International Nuclear Information System (INIS)

    Ketkar, S.N.

    1984-01-01

    During the course of this work experiments were undertaken to measure the scattering cross-sections for high energy electrons scattering from various target systems. The experiments can be broadly classified into two categories, one dealing with rather small systems and the other dealing with large systems (at least in the view of physicists). Although the experimental aspects, in so much as the experimental measurement of the intensities of the scattered electron is concerned, is the same for both the cases the motivation for performing the experiment is totally different. In the first case, simple atomic and molecular target systems, namely He, H 2 and D 2 , are used. For such systems, good theoretical framework is available and critical comparisons of experimental cross sections are made with theoretical predictions. Attention is focussed mainly at small momentum transfer (up to 10A -1 ), and correlation and binding effects are studied. In the second case, somewhat larger molecular systems, namely naphthalene, anthraquinone, anthracene and dichromium tetraacetate are used. For such systems attention is focused at large momentum transfer (from 10 to 25 A -1 ) to obtain structural information about the molecules

  16. Human processing of behaviorally relevant and irrelevant absence of expected rewards: a high-resolution ERP study.

    Directory of Open Access Journals (Sweden)

    Louis Nahum

    Full Text Available Acute lesions of the posterior medial orbitofrontal cortex (OFC in humans may induce a state of reality confusion marked by confabulation, disorientation, and currently inappropriate actions. This clinical state is strongly associated with an inability to abandon previously valid anticipations, that is, extinction capacity. In healthy subjects, the filtering of memories according to their relation with ongoing reality is associated with activity in posterior medial OFC (area 13 and electrophysiologically expressed at 220-300 ms. These observations indicate that the human OFC also functions as a generic reality monitoring system. For this function, it is presumably more important for the OFC to evaluate the current behavioral appropriateness of anticipations rather than their hedonic value. In the present study, we put this hypothesis to the test. Participants performed a reversal learning task with intermittent absence of reward delivery. High-density evoked potential analysis showed that the omission of expected reward induced a specific electrocortical response in trials signaling the necessity to abandon the hitherto reward predicting choice, but not when omission of reward had no such connotation. This processing difference occurred at 200-300 ms. Source estimation using inverse solution analysis indicated that it emanated from the posterior medial OFC. We suggest that the human brain uses this signal from the OFC to keep thought and behavior in phase with reality.

  17. Developing and evaluating a relevant and feasible instrument for measuring health literacy of Canadian high school students.

    Science.gov (United States)

    Wu, Amery D; Begoray, Deborah L; Macdonald, Marjorie; Wharf Higgins, Joan; Frankish, Jim; Kwan, Brenda; Fung, Winny; Rootman, Irving

    2010-12-01

    Health literacy has come to play a critical role in health education and promotion, yet it is poorly understood in adolescents and few measurement tools exist. Standardized instruments to measure health literacy in adults assume it to be a derivative of general literacy. This paper reports on the development and the early-stage validation of a health literacy tool for high school students that measured skills to understand and evaluate health information. A systematic process was used to develop, score and validate items. Questionnaire data were collected from 275, primarily 10th grade students in three secondary schools in Vancouver, Canada that reflected variation in demographic profile. Forty-eight percent were male, and 69.1% spoke a language other than English. Bivariate correlations between background variables and the domain and overall health literacy scores were calculated. A regression model was developed using 15 explanatory variables. The R(2) value was 0.567. Key findings were that lower scores were achieved by males, students speaking a second language other than English, those who immigrated to Canada at a later age and those who skipped school more often. Unlike in general literacy where the family factors of mother's education and family affluence both played significant roles, these two factors failed to predict the health literacy of our school-aged sample. The most significant contributions of this work include the creation of an instrument for measuring adolescent health literacy and further emphasizing the distinction between health literacy and general literacy.

  18. Generic safety documentation model

    International Nuclear Information System (INIS)

    Mahn, J.A.

    1994-04-01

    This document is intended to be a resource for preparers of safety documentation for Sandia National Laboratories, New Mexico facilities. It provides standardized discussions of some topics that are generic to most, if not all, Sandia/NM facilities safety documents. The material provides a ''core'' upon which to develop facility-specific safety documentation. The use of the information in this document will reduce the cost of safety document preparation and improve consistency of information

  19. Properties of recent IBAD-MOCVD coated conductors relevant to their high field, low temperature magnet use

    International Nuclear Information System (INIS)

    Braccini, V; Xu, A; Jaroszynski, J; Xin, Y; Larbalestier, D C; Chen, Y; Carota, G; Dackow, J; Kesgin, I; Yao, Y; Guevara, A; Shi, T; Selvamanickam, V

    2011-01-01

    BaZrO 3 (BZO) nanorods are now incorporated into production IBAD-MOCVD coated conductors. Here we compare several examples of both BZO-free and BZO-containing coated conductors using critical current (I c ) characterizations at 4.2 K over their full angular range up to fields of 31 T. We find that BZO nanorods do not produce any c-axis distortion of the critical current density J c (θ) curve at 4.2 K at any field, but also that pinning is nevertheless strongly enhanced compared to the non-BZO conductors. We also find that the tendency of the ab-plane J c (θ) peak to become cusp-like is moderated by BZO and we define a new figure of merit that may be helpful for magnet design-the OADI (off-axis double I c ), which clearly shows that BZO broadens the ab-plane peak and thus raises J c 5 0 -30 0 away from the tape plane, where the most critical approach to I c occurs in many coil designs. We describe some experimental procedures that may make critical current I c tests of these very high current tapes more tractable at 4.2 K, where I c exceeds 1000 A even for 4 mm wide tape with only 1 μm thickness of superconductor. A positive conclusion is that BZO is very beneficial for the J c characteristics at 4.2 K, just as it is at higher temperatures, where the correlated c-axis pinning effects of the nanorods are much more obvious.

  20. Properties of recent IBAD-MOCVD coated conductors relevant to their high field, low temperature magnet use

    Energy Technology Data Exchange (ETDEWEB)

    Braccini, V; Xu, A; Jaroszynski, J; Xin, Y; Larbalestier, D C [Applied Superconductivity Center, National High Magnetic Field Laboratory, 2031 E Paul Dirac Drive, Tallahassee, FL 32310 (United States); Chen, Y; Carota, G; Dackow, J [SuperPower Inc., 450 Duane Avenue, Schenectady, NY 12304 (United States); Kesgin, I; Yao, Y; Guevara, A; Shi, T; Selvamanickam, V, E-mail: braccini@asc.magnet.fsu.edu [Department of Mechanical Engineering and the Texas Center for Superconductivity at the University of Houston, 4800 Calhoun Road, Houston, TX 77204 (United States)

    2011-03-15

    BaZrO{sub 3} (BZO) nanorods are now incorporated into production IBAD-MOCVD coated conductors. Here we compare several examples of both BZO-free and BZO-containing coated conductors using critical current (I{sub c}) characterizations at 4.2 K over their full angular range up to fields of 31 T. We find that BZO nanorods do not produce any c-axis distortion of the critical current density J{sub c}({theta}) curve at 4.2 K at any field, but also that pinning is nevertheless strongly enhanced compared to the non-BZO conductors. We also find that the tendency of the ab-plane J{sub c}({theta}) peak to become cusp-like is moderated by BZO and we define a new figure of merit that may be helpful for magnet design-the OADI (off-axis double I{sub c}), which clearly shows that BZO broadens the ab-plane peak and thus raises J{sub c} 5{sup 0}-30{sup 0} away from the tape plane, where the most critical approach to I{sub c} occurs in many coil designs. We describe some experimental procedures that may make critical current I{sub c} tests of these very high current tapes more tractable at 4.2 K, where I{sub c} exceeds 1000 A even for 4 mm wide tape with only 1 {mu}m thickness of superconductor. A positive conclusion is that BZO is very beneficial for the J{sub c} characteristics at 4.2 K, just as it is at higher temperatures, where the correlated c-axis pinning effects of the nanorods are much more obvious.

  1. Multimodal document management in radiotherapy

    International Nuclear Information System (INIS)

    Fahrner, H.; Kirrmann, S.; Roehner, F.; Schmucker, M.; Hall, M.; Heinemann, F.

    2013-01-01

    Background and purpose: After incorporating treatment planning and the organisational model of treatment planning in the operating schedule system (BAS, 'Betriebsablaufsystem'), complete document qualities were embedded in the digital environment. The aim of this project was to integrate all documents independent of their source (paper-bound or digital) and to make content from the BAS available in a structured manner. As many workflow steps as possible should be automated, e.g. assigning a document to a patient in the BAS. Additionally it must be guaranteed that at all times it could be traced who, when, how and from which source documents were imported into the departmental system. Furthermore work procedures should be changed that the documentation conducted either directly in the departmental system or from external systems can be incorporated digitally and paper document can be completely avoided (e.g. documents such as treatment certificate, treatment plans or documentation). It was a further aim, if possible, to automate the removal of paper documents from the departmental work flow, or even to make such paper documents superfluous. In this way patient letters for follow-up appointments should automatically generated from the BAS. Similarly patient record extracts in the form of PDF files should be enabled, e.g. for controlling purposes. Method: The available document qualities were analysed in detail by a multidisciplinary working group (BAS-AG) and after this examination and assessment of the possibility of modelling in our departmental workflow (BAS) they were transcribed into a flow diagram. The gathered specifications were implemented in a test environment by the clinical and administrative IT group of the department of radiation oncology and subsequent to a detailed analysis introduced into clinical routine. Results: The department has succeeded under the conditions of the aforementioned criteria to embed all relevant documents in the departmental

  2. Consultation document Energy Market Concentrations

    International Nuclear Information System (INIS)

    De Maa, J.; Van Gemert, M.; Karel, A.; La Bastide, G.; Giesbertz, P.; Buijs, F.; Vermeulen, M.; Beusmans, P.

    2006-06-01

    This the second consultation document of the Netherlands Competition Authority (NMa) on the title subject (the first was in 2002). The purpose of the consultation is to involve all the relevant and interested parties in the development of the energy market in the Netherlands and to consult those parties on studies that have been carried out by the NMa so far: (1) defining (possible) relevant markets in the electricity sector, and (2) the vision and opinion of the NMa with respect to mergers and take-overs. Also, the consultation document is a contribution to the response of the letter from the Dutch Minister of Economic Affairs of May 2005 in which the NMa was requested to give an overview of the preconditions with regard to competition and it's legal aspects [nl

  3. IR and OLAP in XML document warehouses

    DEFF Research Database (Denmark)

    Perez, Juan Manuel; Pedersen, Torben Bach; Berlanga, Rafael

    2005-01-01

    In this paper we propose to combine IR and OLAP (On-Line Analytical Processing) technologies to exploit a warehouse of text-rich XML documents. In the system we plan to develop, a multidimensional implementation of a relevance modeling document model will be used for interactively querying...

  4. Combining novel monitoring tools and precision application technologies for integrated high-tech crop protection in the future (a discussion document).

    Science.gov (United States)

    Zijlstra, Carolien; Lund, Ivar; Justesen, Annemarie F; Nicolaisen, Mogens; Jensen, Peter Kryger; Bianciotto, Valeria; Posta, Katalin; Balestrini, Raffaella; Przetakiewicz, Anna; Czembor, Elzbieta; van de Zande, Jan

    2011-06-01

    The possibility of combining novel monitoring techniques and precision spraying for crop protection in the future is discussed. A generic model for an innovative crop protection system has been used as a framework. This system will be able to monitor the entire cropping system and identify the presence of relevant pests, diseases and weeds online, and will be location specific. The system will offer prevention, monitoring, interpretation and action which will be performed in a continuous way. The monitoring is divided into several parts. Planting material, seeds and soil should be monitored for prevention purposes before the growing period to avoid, for example, the introduction of disease into the field and to ensure optimal growth conditions. Data from previous growing seasons, such as the location of weeds and previous diseases, should also be included. During the growing season, the crop will be monitored at a macroscale level until a location that needs special attention is identified. If relevant, this area will be monitored more intensively at a microscale level. A decision engine will analyse the data and offer advice on how to control the detected diseases, pests and weeds, using precision spray techniques or alternative measures. The goal is to provide tools that are able to produce high-quality products with the minimal use of conventional plant protection products. This review describes the technologies that can be used or that need further development in order to achieve this goal. Copyright © 2011 Society of Chemical Industry.

  5. Extractive Summarisation of Medical Documents

    OpenAIRE

    Abeed Sarker; Diego Molla; Cecile Paris

    2012-01-01

    Background Evidence Based Medicine (EBM) practice requires practitioners to extract evidence from published medical research when answering clinical queries. Due to the time-consuming nature of this practice, there is a strong motivation for systems that can automatically summarise medical documents and help practitioners find relevant information. Aim The aim of this work is to propose an automatic query-focused, extractive summarisation approach that selects informative sentences from medic...

  6. The utility of ultra-high performance supercritical fluid chromatography-tandem mass spectrometry (UHPSFC-MS/MS) for clinically relevant steroid analysis.

    Science.gov (United States)

    Storbeck, Karl-Heinz; Gilligan, Lorna; Jenkinson, Carl; Baranowski, Elizabeth S; Quanson, Jonathan L; Arlt, Wiebke; Taylor, Angela E

    2018-05-15

    Liquid chromatography tandem mass spectrometry (LC-MS/MS) assays are considered the reference standard for serum steroid hormone analyses, while full urinary steroid profiles are only achievable by gas chromatography (GC-MS). Both LC-MS/MS and GC-MS have well documented strengths and limitations. Recently, commercial ultra-high performance supercritical fluid chromatography-tandem mass spectrometry (UHPSFC-MS/MS) systems have been developed. These systems combine the resolution of GC with the high-throughput capabilities of UHPLC. Uptake of this new technology into research and clinical labs has been slow, possibly due to the perceived increase in complexity. Here we therefore present fundamental principles of UHPSFC-MS/MS and the likely applications for this technology in the clinical research setting, while commenting on potential hurdles based on our experience to date. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

  7. Documentation of Cultural Heritage Objects

    Directory of Open Access Journals (Sweden)

    Jon Grobovšek

    2013-09-01

    the needs of potential users. Inadequate archiving may cause irreversible damage to documents. It is unreasonable to store data in a format which could not be read by future generations. In spite of high capacity of data bases the aspect of long term archiving of analogue documents should not be neglected. The past is being stored for the future, including different methods of storing various types of historical archives.

  8. Reliable planning and monitoring tools by dismantling 3D photographic image of high resolution and document management systems. Application MEDS system; Planificacion fiable y seguimiento del desmantelamiento mediante herramientas 3D, imagen fotografica de alta resolucion y sistemas de gestion documental. Aplicacion del sistema MEDS

    Energy Technology Data Exchange (ETDEWEB)

    Vela Morales, F.

    2010-07-01

    MEDS system (Metric Environment Documentation System) is a method developed by CT3 based engineering documentation generation metric of a physical environment using measurement tools latest technology and high precision, such as the Laser Scanner. With this equipment it is possible to obtain three-dimensional information of a physical environment through the 3D coordinates of millions of points. This information is processed by software that is very useful tool for modeling operations and 3D simulations.

  9. Vision document Energy Market Concentrations

    International Nuclear Information System (INIS)

    De Maa, J.; Van Gemert, M.; Giesbertz, P.; Vermeulen, M.; Beusmans, P.; Te Velthuis, M.; Drahos, M.

    2006-11-01

    June 2006 the second consultation document of the Netherlands Competition Authority (NMa) on the title subject (the first was in 2002) was published. The purpose of the consultation is to involve all the relevant and interested parties in the development of the energy market in the Netherlands and to consult those parties on studies that have been carried out by the NMa so far: (1) defining (possible) relevant markets in the electricity sector, and (2) the vision and opinion of the NMa with respect to mergers and take-overs. Also, the consultation document is a contribution to the response of the letter from the Dutch Minister of Economic Affairs of May 2005 in which the NMa was requested to give an overview of the preconditions with regard to competition and it's legal aspects. In this vision document all the relevant parties and stakeholders are informed about the development of energy markets in the Netherlands and abroad. Also an overview is given of the reactions from many stakeholders, involved and interested parties. [nl

  10. Support Vector Machines: Relevance Feedback and Information Retrieval.

    Science.gov (United States)

    Drucker, Harris; Shahrary, Behzad; Gibbon, David C.

    2002-01-01

    Compares support vector machines (SVMs) to Rocchio, Ide regular and Ide dec-hi algorithms in information retrieval (IR) of text documents using relevancy feedback. If the preliminary search is so poor that one has to search through many documents to find at least one relevant document, then SVM is preferred. Includes nine tables. (Contains 24…

  11. DOCUMENTATION OF NATIONAL WEATHER CONDITIONS AFFECTING LONG-TERM DEGRADATION OF COMMERCIAL SPENT NUCLEAR FUEL AND DOE SPENT NUCLEAR FUEL AND HIGH-LEVEL WASTE

    International Nuclear Information System (INIS)

    W. L. Poe, Jr.; P.F. Wise

    1998-01-01

    The U.S. Department of Energy (DOE) is preparing a proposal to construct, operate 2nd monitor, and eventually close a repository at Yucca Mountain in Nye County, Nevada, for the geologic disposal of spent nuclear fuel (SNF) and high-level radioactive waste (HLW). As part of this effort, DOE has prepared a viability assessment and an assessment of potential consequences that may exist if the repository is not constructed. The assessment of potential consequences if the repository is not constructed assumes that all SNF and HLW would be left at the generator sites. These include 72 commercial generator sites (three commercial facility pairs--Salem and Hope Creek, Fitzpatrick and Nine Mile Point, and Dresden and Morris--would share common storage due to their close proximity to each other) and five DOE sites across the country. DOE analyzed the environmental consequences of the effects of the continued storage of these materials at these sites in a report titled Continued Storage Analysis Report (CSAR; Reference 1 ) . The CSAR analysis includes a discussion of the degradation of these materials when exposed to the environment. This document describes the environmental parameters that influence the degradation analyzed in the CSAR. These include temperature, relative humidity, precipitation chemistry (pH and chemical composition), annual precipitation rates, annual number of rain-days, and annual freeze/thaw cycles. The document also tabulates weather conditions for each storage site, evaluates the degradation of concrete storage modules and vaults in different regions of the country, and provides a thermal analysis of commercial SNF in storage

  12. PORFLOW TESTING AND VERIFICATION DOCUMENT

    International Nuclear Information System (INIS)

    Aleman, S

    2007-01-01

    The PORFLOW software package is a comprehensive mathematical model for simulation of multi-phase fluid flow, heat transfer and mass transport in variably saturated porous and fractured media. PORFLOW can simulate transient or steady-state problems in Cartesian or cylindrical geometry. The porous medium may be anisotropic and heterogeneous and may contain discrete fractures or boreholes with the porous matrix. The theoretical models within the code provide a unified treatment of concepts relevant to fluid flow and transport. The main features of PORFLOW that are relevant to Performance Assessment modeling at the Savannah River National Laboratory (SRNL) include variably saturated flow and transport of parent and progeny radionuclides. This document involves testing a relevant sample of problems in PORFLOW and comparing the outcome of the simulations to analytical solutions or other commercial codes. The testing consists of the following four groups. Group 1: Groundwater Flow; Group 2: Contaminant Transport; Group 3: Numerical Dispersion; and Group 4: Keyword Commands

  13. Presence of high-grade intraepithelial lesions among women deprived of their liberty: a documental study Presencia de lesiones intraepiteliales de alto grado a las mujeres privadas de libertad: estudio documental Presença de lesões intraepiteliais de alto grau entre mulheres privadas de liberdade: estudo documental

    Directory of Open Access Journals (Sweden)

    Paula Renata Amorim Lessa

    2012-04-01

    Full Text Available The aim of this study was to analyze the results of the Pap smears of women deprived of their liberty. It is a retrospective, documental study, with a quantitative approach, performed in a female prison of Ceará, Brazil, with a sample of 672 patient records. Regarding the microbiological findings, it was verified that the main cervical-vaginal colonization was by bacilli suggestive of Gardnerella/Mobiluncus (21.8%, followed by Trichomonas vaginalis (12%, and Candida sp (5.8%. The frequencies of samples with atypical cells presented rates of 4.1% for Atypical Cells of Undetermined Significance; 3.2% for Low-grade Intraepithelial Lesions; and 2.5% for High-grade Intraepithelial Lesions. The importance of screening for cervical cancer in female prisons was highlighted, as well as the inclusion of the nurse in this environment, ensuring individualized, quality care for women deprived of their liberty.El objetivo fue analizar los resultados de la prueba de Papanicolaou de mujeres privadas de libertad. Tipo de estudio documental, con un enfoque cuantitativo, desarrollado en una cárcel de mujeres en Ceará-Brasil, con muestra de 672 archivos. En cuanto a los resultados microbiológicos se comprobó que el principal colonización de cáncer cervical-vaginal fueron los Bacilos sugestivos de Gardnerella/Mobiluncus con 21,8%, seguido de Trichomonas vaginalis 12% y Cándida sp 5,8%. Las frecuencias de las muestras con atipia celular se registraron tasas de 4,1% para Atipias de significado indeterminado; Lesiones Intraepiteliales de bajo grado 3,2% y Lesiones Intraepiteliales de alto grado 2,5%. La conclusión es la importancia de la detección del cáncer cervical en las cárceles de mujeres, así como la inclusión de los enfermeros en este entorno al tiempo que garantiza una calidad y una atención individualizada a las mujeres presas.Objetivou-se analisar os resultados dos exames citopatológicos de mulheres privadas de liberdade. Estudo documental

  14. Triangular clustering in document networks

    Energy Technology Data Exchange (ETDEWEB)

    Cheng Xueqi; Ren Fuxin [Institute of Computing Technology, Chinese Academy of Sciences, Beijing 100190 (China); Zhou Shi [Department of Computer Science, University College London, Malet Place, London WC1E 6BT (United Kingdom); Hu Maobin [School of Engineering Science, University of Science and Technology of China, Hefei 230026 (China)], E-mail: cxq@ict.ac.cn, E-mail: renfuxin@software.ict.ac.cn, E-mail: s.zhou@adastral.ucl.ac.uk, E-mail: humaobin@ustc.edu.cn

    2009-03-15

    Document networks have the characteristic that a document node, e.g. a webpage or an article, carries meaningful content. Properties of document networks are not only affected by topological connectivity between nodes, but are also strongly influenced by the semantic relation between the content of the nodes. We observed that document networks have a large number of triangles and a high value clustering coefficient. Also there is a strong correlation between the probability of formation of a triangle and the content similarity among the three nodes involved. We propose the degree-similarity product (DSP) model, which well reproduces these properties. The model achieves this by using a preferential attachment mechanism that favours the linkage between nodes that are both popular and similar. This work is a step forward towards a better understanding of the structure and evolution of document networks.

  15. Autism-relevant traits interact with temporoparietal junction stimulation effects on social cognition: a high-definition transcranial direct current stimulation and electroencephalography study.

    Science.gov (United States)

    Donaldson, Peter H; Kirkovski, Melissa; Rinehart, Nicole J; Enticott, Peter G

    2018-03-01

    The temporoparietal junction (TPJ) is implicated in mental and emotional state attribution, processes associated with autism-relevant traits. Transcranial direct current stimulation (tDCS) to the TPJ can influence social-cognitive performance. However, associations with electrophysiology and autism-relevant traits remain relatively unexamined. This study had two aims: first, exploring links between Autism-Spectrum Quotient (AQ) scores and social-cognitive performance; second, examining interactions between AQ scores and high-definition-tDCS (HD-tDCS) applied to the right TPJ in terms of mental/emotional state attribution and neurophysiological outcomes. Fifty-three participants completed mental/emotional state attribution tasks before and after HD-tDCS. Pre-stimulation mental state attribution accuracy was reduced in participants with higher AQ Switching scores. Cathodal stimulation was associated with reduced emotion attribution performance in participants with higher AQ Switching and AQ Social scores (the latter at trend-level). Anodal stimulation more frequently interacted with AQ Social scores in terms of neurophysiology, in particular regarding reduced delta power in the left compared to right TPJ, and trend-level positive interactions with P100 and P300 latencies during the emotion recognition task. Elements of attention/switching (AQ Switching) may subserve or underpin elements of social cognition (AQ Social), and cathodal and anodal stimulation may have differing effects depending on trait levels in these domains. This study makes an important and original contribution in terms of increasing understanding of how such trait-level variation might interact with the effects of tDCS and also extending previous studies with regard to understanding potential roles of the rTPJ in both attention and social cognition and how autism-relevant traits might influence TPJ function. © 2017 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

  16. Registration document 2005; Document de reference 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This reference document of Gaz de France provides information and data on the Group activities in 2005: financial informations, business, activities, equipments factories and real estate, trade, capital, organization charts, employment, contracts and research programs. (A.L.B.)

  17. Industry-relevant magnetron sputtering and cathodic arc ultra-high vacuum deposition system for in situ x-ray diffraction studies of thin film growth using high energy synchrotron radiation

    OpenAIRE

    Schroeder, Jeremy; Thomson, W.; Howard, B.; Schell, N.; Näslund, Lars-Åke; Rogström, Lina; Johansson-Jöesaar, Mats P.; Ghafoor, Naureen; Odén, Magnus; Nothnagel, E.; Shepard, A.; Greer, J.; Birch, Jens

    2015-01-01

    We present an industry-relevant, large-scale, ultra-high vacuum (UHV) magnetron sputtering and cathodic arc deposition system purposefully designed for time-resolved in situ thin film deposition/annealing studies using high-energy (greater than50 keV), high photon flux (greater than10(12) ph/s) synchrotron radiation. The high photon flux, combined with a fast-acquisition-time (less than1 s) two-dimensional (2D) detector, permits time-resolved in situ structural analysis of thin film formation...

  18. 2002 reference document; Document de reference 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

  19. Why relevance theory is relevant for lexicography

    DEFF Research Database (Denmark)

    Bothma, Theo; Tarp, Sven

    2014-01-01

    This article starts by providing a brief summary of relevance theory in information science in relation to the function theory of lexicography, explaining the different types of relevance, viz. objective system relevance and the subjective types of relevance, i.e. topical, cognitive, situational...... that is very important for lexicography as well as for information science, viz. functional relevance. Since all lexicographic work is ultimately aimed at satisfying users’ information needs, the article then discusses why the lexicographer should take note of all these types of relevance when planning a new...... dictionary project, identifying new tasks and responsibilities of the modern lexicographer. The article furthermore discusses how relevance theory impacts on teaching dictionary culture and reference skills. By integrating insights from lexicography and information science, the article contributes to new...

  20. IMP-8 observations of the spectra, composition, and variability of solar heavy ions at high energies relevant to manned space missions

    International Nuclear Information System (INIS)

    Tylka, Allan J.; Dietrich, William F.

    1999-01-01

    In more than 25 years of almost continuous observations, the University of Chicago's Cosmic Ray Telescope (CRT) on IMP-8 has amassed a unique database on high-energy solar heavy ions of potential relevance to manned spaceflight. In the very largest particle events, IMP-8/CRT has even observed solar Fe ions above the Galactic cosmic ray background up to ∼800 MeV/nucleon, an energy sufficiently high to penetrate nearly 25 g/cm 2 of shielding. IMP-8/CRT observations show that high-energy heavy-ion spectra are often surprisingly hard power laws, without the exponential roll-offs suggested by stochastic acceleration fits to lower energy measurements alone. Also, in many solar particle events the Fe/O ratio grows with increasing energy, contrary to the notion that ions with higher mass-to-charge ratios should be less abundant at higher energies. Previous studies of radiation hazards for manned spaceflight have often assumed heavy-ion composition and steeply-falling energy spectra inconsistent with these observations. Conclusions based on such studies should therefore be re-assessed. The significant event-to-event variability observed in the high-energy solar heavy ions also has important implications for strategies in building probabilistic models of solar particle radiation hazards

  1. Inoculating Relevance Feedback Against Poison Pills

    NARCIS (Netherlands)

    Dehghani, Mostafa; Azarbonyad, Hosein; Kamps, Jaap; Hiemstra, Djoerd; Marx, Maarten

    2016-01-01

    Relevance Feedback is a common approach for enriching queries, given a set of explicitly or implicitly judged documents to improve the performance of the retrieval. Although it has been shown that on average, the overall performance of retrieval will be improved after relevance feedback, for some

  2. System design document for the INFLO prototype.

    Science.gov (United States)

    2014-03-01

    This report documents the high level System Design Document (SDD) for the prototype development and : demonstration of the Intelligent Network Flow Optimization (INFLO) application bundle, with a focus on the Speed : Harmonization (SPD-HARM) and Queu...

  3. Web document engineering

    International Nuclear Information System (INIS)

    White, B.

    1996-05-01

    This tutorial provides an overview of several document engineering techniques which are applicable to the authoring of World Wide Web documents. It illustrates how pre-WWW hypertext research is applicable to the development of WWW information resources

  4. Enterprise Document Management

    Data.gov (United States)

    US Agency for International Development — The function of the operation is to provide e-Signature and document management support for Acquisition and Assisitance (A&A) documents including vouchers in...

  5. WIPP documentation plan

    International Nuclear Information System (INIS)

    Plung, D.L.; Montgomery, T.T.; Glasstetter, S.R.

    1986-01-01

    In support of the programs at the Waste Isolation Pilot Plant (WIPP), the Publications and Procedures Section developed a documentation plan that provides an integrated document hierarchy; further, this plan affords several unique features: 1) the format for procedures minimizes the writing responsibilities of the technical staff and maximizes use of the writing and editing staff; 2) review cycles have been structured to expedite the processing of documents; and 3) the numbers of documents needed to support the program have been appreciably reduced

  6. Documenting Employee Conduct

    Science.gov (United States)

    Dalton, Jason

    2009-01-01

    One of the best ways for a child care program to lose an employment-related lawsuit is failure to document the performance of its employees. Documentation of an employee's performance can provide evidence of an employment-related decision such as discipline, promotion, or discharge. When properly implemented, documentation of employee performance…

  7. Documents preparation and review

    International Nuclear Information System (INIS)

    1999-01-01

    Ignalina Safety Analysis Group takes active role in assisting regulatory body VATESI to prepare various regulatory documents and reviewing safety reports and other documentation presented by Ignalina NPP in the process of licensing of unit 1. The list of main documents prepared and reviewed is presented

  8. Development Of Phisyics Learning Documents Based Student's Learning Style In The Matter Of Temperature And Heat Subjects Of Class X High School

    OpenAIRE

    Resty Noriwita, Indah Resty Noriwita Indah; Nasir, Muhammad Nasir Muhammad; Ma’aruf, Zuhdi Ma’aruf Zuhdi

    2015-01-01

    This study aims to produce a learning documents physicsbased learning styles of students in the matter of temperature and heat of class subjectS X SMA valid. The subjects were learning documents that consists of a lesson plan (RPP), worksheets (LKS), medium of learning and achievement test of cognitive, affective, process, and psychomotor. Data collection instrument in this study is an instrument validity device physics-based learning students' learning styles in the matter of temperature and...

  9. Starlink Document Styles

    Science.gov (United States)

    Lawden, M. D.

    This document describes the various styles which are recommended for Starlink documents. It also explains how to use the templates which are provided by Starlink to help authors create documents in a standard style. This paper is concerned mainly with conveying the ``look and feel" of the various styles of Starlink document rather than describing the technical details of how to produce them. Other Starlink papers give recommendations for the detailed aspects of document production, design, layout, and typography. The only style that is likely to be used by most Starlink authors is the Standard style.

  10. Subject (of documents)

    DEFF Research Database (Denmark)

    Hjørland, Birger

    2017-01-01

    This article presents and discuss the concept “subject” or subject matter (of documents) as it has been examined in library and information science (LIS) for more than 100 years. Different theoretical positions are outlined and it is found that the most important distinction is between document......-oriented views versus request-oriented views. The document-oriented view conceive subject as something inherent in documents, whereas the request-oriented view (or the policy based view) understand subject as an attribution made to documents in order to facilitate certain uses of them. Related concepts...

  11. Experiments with positive, negative and topical relevance feedback

    NARCIS (Netherlands)

    Kaptein, R.; Kamps, J.; Li, R.; Hiemstra, D.

    2008-01-01

    This document contains a description of experiments for the 2008 Relevance Feedback track. We experiment with different amounts of feedback, including negative relevance feedback. Feedback is implemented using massive weighted query expansion. Parsimonious query expansion using Dirichlet smoothing

  12. Areva - 2016 Reference document

    International Nuclear Information System (INIS)

    2017-01-01

    Areva supplies high added-value products and services to support the operation of the global nuclear fleet. The company is present throughout the entire nuclear cycle, from uranium mining to used fuel recycling, including nuclear reactor design and operating services. Areva is recognized by utilities around the world for its expertise, its skills in cutting-edge technologies and its dedication to the highest level of safety. Areva's 36,000 employees are helping build tomorrow's energy model: supplying ever safer, cleaner and more economical energy to the greatest number of people. This Reference Document contains information on Areva's objectives, prospects and development strategies. It contains estimates of the markets, market shares and competitive position of Areva

  13. A Cognitive Model of Document Use during a Research Project. Study I. Document Selection.

    Science.gov (United States)

    Wang, Peiling; Soergel, Dagobert

    1998-01-01

    Proposes a model of document selection by real users of a bibliographic retrieval system. Reports on Part I of a longitudinal study of decision making on document use by academics (25 faculty and graduate students in Agricultural Economics). Examines what components are relevant to the users' decisions and what cognitive process may have occurred…

  14. Reverse spin-crossover and high-pressure kinetics of the heme iron center relevant for the operation of heme proteins under deep-sea conditions.

    Science.gov (United States)

    Troeppner, Oliver; Lippert, Rainer; Shubina, Tatyana E; Zahl, Achim; Jux, Norbert; Ivanović-Burmazović, Ivana

    2014-10-20

    By design of a heme model complex with a binding pocket of appropriate size and flexibility, and by elucidating its kinetics and thermodynamics under elevated pressures, some of the pressure effects are demonstrated relevant for operation of heme-proteins under deep-sea conditions. Opposite from classical paradigms of the spin-crossover and reaction kinetics, a pressure increase can cause deceleration of the small-molecule binding to the vacant coordination site of the heme-center in a confined space and stabilize a high-spin state of its Fe center. This reverse high-pressure behavior can be achieved only if the volume changes related to the conformational transformation of the cavity can offset the volume changes caused by the substrate binding. It is speculated that based on these criteria nature could make a selection of structures of heme pockets that assist in reducing metabolic activity and enzymatic side reactions under extreme pressure conditions. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Speciation, Dissolution, and Redox Reactions of Chromium Relevant to Pretreatment and Separation of High-Level Tank Wastes (First Year of Funding: FY 1998)

    International Nuclear Information System (INIS)

    Rai, Dhanpat; Rao, Linfeng; Clark, Sue B.; Hess, Nancy J.

    2000-01-01

    Chromium, one of the problematic elements in tank sludges, is presently considered to be the most important constituent in defining the total volume of HLW glass to be produced from the Hanford tank wastes. This is because (1) it greatly complicates the vitrification process by forming separate phases in the molten glass and, (2) more importantly, current sludge washing processes are not effective in removing Cr. Inadequate removal of chromium from sludges could result in production of an unacceptably large volume of HLW glass. The removal of Cr from tank sludges is complicated by factors including the complex chemistry of Cr, lack of fundamental data applicable to the HLW chemical systems (high heterogeneity, high ionic strength, high alkalinity and the presence of inorganic and organic ligands, etc.), and the need to avoid processes that may adversely enhance the solubility of Pu and other actinides. Significant gaps exist in the fundamental understanding of Cr chemistry in tank-like environments. Without such data/understanding, these strategies cannot be appropriately evaluated or optimized. The primary objective of the research being carried out under this project is to develop such data/understanding for HLW tank processing. Pacific Northwest and Lawrence Berkeley National Laboratories in collaboration with Washington State University are developing fundamental data on the precipitation/dissolution reactions of Cr(III) compounds and the kinetics of oxidation of Cr(III) to Cr(VI) at room and elevated temperatures and under conditions relevant to high-level waste processing. This integrated approach involving measurement of solubility and oxidation rate constants and spectroscopic characterization of aqueous and solid species as a function of ionic strength, alkalinity, redox conditions and temperature will provide thermodynamic and kinetic data. These data are necessary to predict changes in Cr solubility and speciation in response to changes in pretreatment

  16. Heterogeneous reaction mechanisms and kinetics relevant to the CVD of semiconductor materials

    Energy Technology Data Exchange (ETDEWEB)

    Creighton, J.R.; Coltrin, M.E.

    1994-03-01

    This report documents the state of the art in experimental and theoretical techniques for determining reaction mechanisms and chemical kinetics of heterogeneous reactions relevant to the chemical vapor deposition of semiconductor materials. It summarizes the most common ultra-high vacuum experimental techniques that are used and the types of rate information available from each. Several case studies of specific chemical systems relevant to the microelectronics industry are described. Theoretical methods for calculating heterogeneous reaction rate constants are also summarized.

  17. Exploring nuclear reactions relevant to Stellar and Big-Bang Nucleosynthesis using High-Energy-Density plasmas at OMEGA and the NIF

    Science.gov (United States)

    Gatu Johnson, M.

    2017-10-01

    Thermonuclear reaction rates and nuclear processes have been explored traditionally by means of accelerator experiments, which are difficult to execute at conditions relevant to Stellar Nucleosynthesis (SN) and Big Bang Nucleosynthesis (BBN). High-Energy-Density (HED) plasmas closely mimic astrophysical environments and are an excellent complement to accelerator experiments in exploring SN and BBN-relevant nuclear reactions. To date, our work using HED plasmas at OMEGA and NIF has focused on the complementary 3He+3He, T+3He and T +T reactions. First studies of the T +T reaction indicated the significance of the 5He ground-state resonance in the T +T neutron spectrum. Subsequent T +T experiments showed that the strength of this resonance varies with center-of-mass (c-m) energy in the range of 16-50 keV, a variation that is not fundamentally understood. Studies of the 3He+3He and T+3He reactions have also been conducted at OMEGA at c-m energies of 165 keV and 80 keV, respectively, and the results revealed three things. First, a large cross section for the T+3He- γ branch can be ruled out as an explanation for the anomalously high abundance of 6Li in primordial material. Second, the results contrasted to theoretical modeling indicate that the mirror-symmetry assumption is not enough to capture the differences between T +T and 3He+3He reactions. Third, the elliptical spectrum assumed in the analysis of 3He+3He data obtained in accelerator experiments is incorrect. Preliminary data from recent experiments at the NIF exploring the 3He+3He reaction at c-m energies of 60 keV and 100 keV also indicate that the underlying physics changes with c-m energy. In this talk, we describe these findings and future directions for exploring light-ion reactions at OMEGA and the NIF. The work was supported in part by the US DOE, LLE, and LLNL.

  18. Areva - 2014 Reference document

    International Nuclear Information System (INIS)

    2015-01-01

    Areva supplies high added-value products and services to support the operation of the global nuclear fleet. The company is present throughout the entire nuclear cycle, from uranium mining to used fuel recycling, including nuclear reactor design and operating services. Areva is recognized by utilities around the world for its expertise, its skills in cutting-edge technologies and its dedication to the highest level of safety. Areva's 44,000 employees are helping build tomorrow's energy model: supplying ever safer, cleaner and more economical energy to the greatest number of people. This Reference Document contains information on Areva's objectives, prospects and development strategies. It contains estimates of the markets, market shares and competitive position of Areva. Contents: 1 - Person responsible; 2 - Statutory auditors; 3 - Selected financial information; 4 - Risk factors; 5 - Information about the issuer; 6 - Business overview; 7 - Organizational structure; 8 - Property, plant and equipment; 9 - Analysis of and comments on the group's financial position and performance; 10 - Capital resources; 11 - Research and development programs, patents and licenses; 12 - Trend information; 13 - Profit forecasts; 14 - Administrative, management and supervisory bodies and senior management; 15 - Compensation and benefits; 16 - Functioning of administrative, management and supervisory bodies and senior management; 17 - Employees; 18 - Principal shareholders; 19 - Transactions with related parties; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information; 22 - Major contracts; 23 - Third party information, statements by experts and declarations of interest; 24 - Documents on display; 25 - information on holdings; appendix: Report of the Chairman of the Board of Directors on governance, internal control procedures and risk management, Statutory Auditors' report, Corporate social

  19. Clinical Relevance of 18F-Sodium Fluoride Positron-Emission Tomography in Noninvasive Identification of High-Risk Plaque in Patients With Coronary Artery Disease.

    Science.gov (United States)

    Lee, Joo Myung; Bang, Ji-In; Koo, Bon-Kwon; Hwang, Doyeon; Park, Jonghanne; Zhang, Jinlong; Yaliang, Tong; Suh, Minseok; Paeng, Jin Chul; Shiono, Yasutsugu; Kubo, Takashi; Akasaka, Takashi

    2017-11-01

    18 F-sodium fluoride ( 18 F-NaF) positron-emission tomography has been introduced as a potential noninvasive imaging tool to identify plaques with high-risk characteristics in patients with coronary artery disease. We sought to evaluate the clinical relevance of 18 F-NaF uptake using optical coherence tomography (OCT), intravascular ultrasound (IVUS), and coronary computed tomography angiography in patients with coronary artery disease. The target population consisted of 51 prospectively enrolled patients (93 stenoses) who underwent 18 F-NaF positron-emission tomography before invasive coronary angiography. 18 F-NaF uptake was compared with IVUS- and OCT-derived plaque characteristics. In the coronary computed tomography angiography subgroup (46 lesions), qualitative lesion characteristics were compared between 18 F-NaF-positive and 18 F-NaF-negative plaques using adverse plaque characteristics. The plaques with 18 F-NaF uptake showed significantly higher plaque burden, more frequent posterior attenuation and positive remodeling in IVUS, and significantly higher maximum lipid arc and more frequent microvessels in OCT (all P characteristics. The 18 F-NaF tissue-to-background ratio in plaques with high-risk characteristics was significantly higher than in those without (1.09 [95% confidence interval, 0.85-1.34] versus 0.62 [95% confidence interval, 0.42-0.82], P characteristics between 18 F-NaF-positive and 18 F-NaF-negative plaques in the coronary computed tomography angiography subgroup (85.2% versus 78.9%; P =0.583). This study's results suggest that 18 F-NaF positron-emission tomography can be a useful noninvasive diagnostic tool to identify and localize plaque with high-risk characteristics. URL: http://www.clinicaltrials.gov. Unique identifier: NCT02388412. © 2017 American Heart Association, Inc.

  20. Scheme Program Documentation Tools

    DEFF Research Database (Denmark)

    Nørmark, Kurt

    2004-01-01

    are separate and intended for different documentation purposes they are related to each other in several ways. Both tools are based on XML languages for tool setup and for documentation authoring. In addition, both tools rely on the LAML framework which---in a systematic way---makes an XML language available...... as named functions in Scheme. Finally, the Scheme Elucidator is able to integrate SchemeDoc resources as part of an internal documentation resource....

  1. Health physics documentation

    International Nuclear Information System (INIS)

    Stablein, G.

    1980-01-01

    When dealing with radioactive material the health physicist receives innumerable papers and documents within the fields of researching, prosecuting, organizing and justifying radiation protection. Some of these papers are requested by the health physicist and some are required by law. The scope, quantity and deposit periods of the health physics documentation at the Karlsruhe Nuclear Research Center are presented and rationalizing methods discussed. The aim of this documentation should be the application of physics to accident prevention, i.e. documentation should protect those concerned and not the health physicist. (H.K.)

  2. CAED Document Repository

    Data.gov (United States)

    U.S. Environmental Protection Agency — Compliance Assurance and Enforcement Division Document Repository (CAEDDOCRESP) provides internal and external access of Inspection Records, Enforcement Actions, and...

  3. CFO Payment Document Management

    Data.gov (United States)

    US Agency for International Development — Paperless management will enable the CFO to create, store, and access various financial documents electronically. This capability will reduce time looking for...

  4. Ensuring safety of people in case of severe floods: feasibility and relevance of vertical evacuation strategies in high population density areas

    Directory of Open Access Journals (Sweden)

    Pannier Rodolphe

    2016-01-01

    Full Text Available When a major flooding event is expected the authorities in charge of the crisis management often consider bringing people to safety by making them leaving temporarily the threatened area before the onset of the flood. This strategy is called “horizontal evacuation”. It has to be distinguished from “vertical evacuation”, which means that people reach a shelter above the wtaer level within the flood area. Vertical evacuation is often the spontaneousbehaviourof people who are surprised by the flood and are trying to reach a tree, a floor upstairs, a roof of a building etc. in order to get away from the rising water. But vertical evacuation could also be consideredas an alternative strategy to horizontal evacuation when moving outside the flood area is neither a faisible nor a relevant option, for example in high-population density areas. In order to be a credible alternative to horizontal evacuation, vertical evacuation has to be carefully planned. This paper aims to explain why horizontal evacuation is not always a suitable option in case of major flood and to explore under what conditions vertical evacuation can be a relevantalternative solution to horizontal evacuation. It also adresses some general recommendations about how to prepare a vertical evacuation strategy..

  5. Ablation of clinically relevant kidney tissue volumes by high-intensity focused ultrasound: Preliminary results of standardized ex-vivo investigations.

    Science.gov (United States)

    Häcker, Axel; Peters, Kristina; Knoll, Thomas; Marlinghaus, Ernst; Alken, Peter; Jenne, Jürgen W; Michel, Maurice Stephan

    2006-11-01

    To investigate strategies to achieve confluent kidney-tissue ablation by high-intensity focused ultrasound (HIFU). Our model of the perfused ex-vivo porcine kidney was used. Tissue ablation was performed with an experimental HIFU device (Storz Medical, Kreuzlingen, Switzerland). Lesion-to-lesion interaction was investigated by varying the lesion distance (5 to 2.5 mm), generator power (300, 280, and 260 W), cooling time (10, 20, and 30 seconds), and exposure time (4, 3, and 2 seconds). The lesion rows were analyzed grossly and by histologic examination (hematoxylin-eosin and nicotinamide adenine dinucleotide staining). It was possible to achieve complete homogeneous ablation of a clinically relevant tissue volume but only by meticulous adjustment of the exposure parameters. Minimal changes in these parameters caused changes in lesion formation with holes within the lesions and lesion-to-lesion interaction. Our preliminary results show that when using this new device, HIFU can ablate a large tissue volume homogeneously in perfused ex-vivo porcine tissue under standardized conditions with meticulous adjustment of exposure parameters. Further investigations in vivo are necessary to test whether large tissue volumes can be ablated completely and reliably despite the influence of physiologic tissue and organ movement.

  6. High-resolution inversion of OMI formaldehyde columns to quantify isoprene emission on ecosystem-relevant scales: application to the southeast US

    Science.gov (United States)

    Kaiser, Jennifer; Jacob, Daniel J.; Zhu, Lei; Travis, Katherine R.; Fisher, Jenny A.; González Abad, Gonzalo; Zhang, Lin; Zhang, Xuesong; Fried, Alan; Crounse, John D.; St. Clair, Jason M.; Wisthaler, Armin

    2018-04-01

    Isoprene emissions from vegetation have a large effect on atmospheric chemistry and air quality. Bottom-up isoprene emission inventories used in atmospheric models are based on limited vegetation information and uncertain land cover data, leading to potentially large errors. Satellite observations of atmospheric formaldehyde (HCHO), a high-yield isoprene oxidation product, provide top-down information to evaluate isoprene emission inventories through inverse analyses. Past inverse analyses have however been hampered by uncertainty in the HCHO satellite data, uncertainty in the time- and NOx-dependent yield of HCHO from isoprene oxidation, and coarse resolution of the atmospheric models used for the inversion. Here we demonstrate the ability to use HCHO satellite data from OMI in a high-resolution inversion to constrain isoprene emissions on ecosystem-relevant scales. The inversion uses the adjoint of the GEOS-Chem chemical transport model at 0.25° × 0.3125° horizontal resolution to interpret observations over the southeast US in August-September 2013. It takes advantage of concurrent NASA SEAC4RS aircraft observations of isoprene and its oxidation products including HCHO to validate the OMI HCHO data over the region, test the GEOS-Chem isoprene oxidation mechanism and NOx environment, and independently evaluate the inversion. This evaluation shows in particular that local model errors in NOx concentrations propagate to biases in inferring isoprene emissions from HCHO data. It is thus essential to correct model NOx biases, which was done here using SEAC4RS observations but can be done more generally using satellite NO2 data concurrently with HCHO. We find in our inversion that isoprene emissions from the widely used MEGAN v2.1 inventory are biased high over the southeast US by 40 % on average, although the broad-scale distributions are correct including maximum emissions in Arkansas/Louisiana and high base emission factors in the oak-covered Ozarks of southeast

  7. Gaia DR1 documentation

    Science.gov (United States)

    van Leeuwen, F.; de Bruijne, J. H. J.; Arenou, F.; Comoretto, G.; Eyer, L.; Farras Casas, M.; Hambly, N.; Hobbs, D.; Salgado, J.; Utrilla Molina, E.; Vogt, S.; van Leeuwen, M.; Abreu, A.; Altmann, M.; Andrei, A.; Babusiaux, C.; Bastian, U.; Biermann, M.; Blanco-Cuaresma, S.; Bombrun, A.; Borrachero, R.; Brown, A. G. A.; Busonero, D.; Busso, G.; Butkevich, A.; Cantat-Gaudin, T.; Carrasco, J. M.; Castañeda, J.; Charnas, J.; Cheek, N.; Clementini, G.; Crowley, C.; Cuypers, J.; Davidson, M.; De Angeli, F.; De Ridder, J.; Evans, D.; Fabricius, C.; Findeisen, K.; Fleitas, J. M.; Gracia, G.; Guerra, R.; Guy, L.; Helmi, A.; Hernandez, J.; Holl, B.; Hutton, A.; Klioner, S.; Lammers, U.; Lecoeur-Taïbi, I.; Lindegren, L.; Luri, X.; Marinoni, S.; Marrese, P.; Messineo, R.; Michalik, D.; Mignard, F.; Montegriffo, P.; Mora, A.; Mowlavi, N.; Nienartowicz, K.; Pancino, E.; Panem, C.; Portell, J.; Rimoldini, L.; Riva, A.; Robin, A.; Siddiqui, H.; Smart, R.; Sordo, R.; Soria, S.; Turon, C.; Vallenari, A.; Voss, H.

    2017-12-01

    We present the first Gaia data release, Gaia DR1, consisting of astrometry and photometry for over 1 billion sources brighter than magnitude 20.7 in the white-light photometric band G of Gaia. The Gaia Data Processing and Analysis Consortium (DPAC) processed the raw measurements collected with the Gaia instruments during the first 14 months of the mission, and turned these into an astrometric and photometric catalogue. Gaia DR1 consists of three parts: an astrometric data set which contains the positions, parallaxes, and mean proper motions for about 2 million of the brightest stars in common with the Hipparcos and Tycho-2 catalogues (the primary astrometric data set) and the positions for an additional 1.1 billion sources (the secondary astrometric data set). The primary set forms the realisation of the Tycho-Gaia Astrometric Solution (TGAS). The second part of Gaia DR1 is the photometric data set, which contains the mean G-band magnitudes for all sources. The third part consists of the G-band light curves and the characteristics of 3000 Cepheid and RR Lyrae stars observed at high cadence around the south ecliptic pole. The positions and proper motions in the astrometric data set are given in a reference frame that is aligned with the International Celestial Reference Frame (ICRF) to better than 0.1 mas at epoch J2015.0, and non-rotating with respect to the ICRF to within 0.03 mas yr^-1. For the primary astrometric data set, the typical standard error for the positions and parallaxes is about 0.3 mas, while for the proper motions the typical standard error is about 1 mas yr^-1. Whereas it has been suggested in Gaia Collaboration et al. (2016a) that a systematic component of ∼0.3 mas should be 'added' (in quadrature) to the parallax uncertainties, Brown (2017) clarifies that reported parallax standard errors already include local systematics as a result of the calibration of the TGAS parallax uncertainties by comparison to Hipparcos parallaxes. For the subset of

  8. Document climatic change no. 02: transport and climatic warming, a high risk symposium; Fiche changement climatique no. 02: transport et rechauffement climatique, un carrefour a haut risque

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-02-01

    This document presents data on the greenhouse effect gases emission for various transport (vehicles, train, plane, boat), the measures adopted by the governments and an analysis of the today situation. It proposes also some solutions and attitudes to decrease the emission of these greenhouse effect gases. (A.L.B.)

  9. The Horizontal Ice Nucleation Chamber (HINC): INP measurements at conditions relevant for mixed-phase clouds at the High Altitude Research Station Jungfraujoch

    Science.gov (United States)

    Lacher, Larissa; Lohmann, Ulrike; Boose, Yvonne; Zipori, Assaf; Herrmann, Erik; Bukowiecki, Nicolas; Steinbacher, Martin; Kanji, Zamin A.

    2017-12-01

    In this work we describe the Horizontal Ice Nucleation Chamber (HINC) as a new instrument to measure ambient ice-nucleating particle (INP) concentrations for conditions relevant to mixed-phase clouds. Laboratory verification and validation experiments confirm the accuracy of the thermodynamic conditions of temperature (T) and relative humidity (RH) in HINC with uncertainties in T of ±0.4 K and in RH with respect to water (RHw) of ±1.5 %, which translates into an uncertainty in RH with respect to ice (RHi) of ±3.0 % at T > 235 K. For further validation of HINC as a field instrument, two measurement campaigns were conducted in winters 2015 and 2016 at the High Altitude Research Station Jungfraujoch (JFJ; Switzerland, 3580 m a. s. l. ) to sample ambient INPs. During winters 2015 and 2016 the site encountered free-tropospheric conditions 92 and 79 % of the time, respectively. We measured INP concentrations at 242 K at water-subsaturated conditions (RHw = 94 %), relevant for the formation of ice clouds, and in the water-supersaturated regime (RHw = 104 %) to represent ice formation occurring under mixed-phase cloud conditions. In winters 2015 and 2016 the median INP concentrations at RHw = 94 % was below the minimum detectable concentration. At RHw = 104 %, INP concentrations were an order of magnitude higher, with median concentrations in winter 2015 of 2.8 per standard liter (std L-1; normalized to standard T of 273 K and pressure, p, of 1013 hPa) and 4.7 std L-1 in winter 2016. The measurements are in agreement with previous winter measurements obtained with the Portable Ice Nucleation Chamber (PINC) of 2.2 std L-1 at the same location. During winter 2015, two events caused the INP concentrations at RHw = 104 % to significantly increase above the campaign average. First, an increase to 72.1 std L-1 was measured during an event influenced by marine air, arriving at the JFJ from the North Sea and the Norwegian Sea. The contribution from anthropogenic or other

  10. ELECTRON-CAPTURE AND β-DECAY RATES FOR sd-SHELL NUCLEI IN STELLAR ENVIRONMENTS RELEVANT TO HIGH-DENSITY O–NE–MG CORES

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Toshio [Department of Physics and Graduate School of Integrated Basic Sciences, College of Humanities and Sciences, Nihon University Sakurajosui 3-25-40, Setagaya-ku, Tokyo 156-8550 (Japan); Toki, Hiroshi [Research Center for Nuclear Physics (RCNP), Osaka University, Ibaraki, Osaka 567-0047 (Japan); Nomoto, Ken’ichi, E-mail: suzuki@phys.chs.nihon-u.ac.jp [Kavli Institute for the Physics and Mathematics of the Universe (WPI), The University of Tokyo, Kashiwa, Chiba 277-8583 (Japan)

    2016-02-01

    Electron-capture and β-decay rates for nuclear pairs in the sd-shell are evaluated at high densities and high temperatures relevant to the final evolution of electron-degenerate O–Ne–Mg cores of stars with initial masses of 8–10 M{sub ⊙}. Electron capture induces a rapid contraction of the electron-degenerate O–Ne–Mg core. The outcome of rapid contraction depends on the evolutionary changes in the central density and temperature, which are determined by the competing processes of contraction, cooling, and heating. The fate of the stars is determined by these competitions, whether they end up with electron-capture supernovae or Fe core-collapse supernovae. Since the competing processes are induced by electron capture and β-decay, the accurate weak rates are crucially important. The rates are obtained for pairs with A = 20, 23, 24, 25, and 27 by shell-model calculations in the sd-shell with the USDB Hamiltonian. Effects of Coulomb corrections on the rates are evaluated. The rates for pairs with A = 23 and 25 are important for nuclear Urca processes that determine the cooling rate of the O–Ne–Mg core, while those for pairs with A = 20 and 24 are important for the core contraction and heat generation rates in the core. We provide these nuclear rates at stellar environments in tables with fine enough meshes at various densities and temperatures for studies of astrophysical processes sensitive to the rates. In particular, the accurate rate tables are crucially important for the final fates of not only O–Ne–Mg cores but also a wider range of stars, such as C–O cores of lower-mass stars.

  11. Comprehensive genomic profiling of 295 cases of clinically advanced urothelial carcinoma of the urinary bladder reveals a high frequency of clinically relevant genomic alterations.

    Science.gov (United States)

    Ross, Jeffrey S; Wang, Kai; Khaira, Depinder; Ali, Siraj M; Fisher, Huge A G; Mian, Badar; Nazeer, Tipu; Elvin, Julia A; Palma, Norma; Yelensky, Roman; Lipson, Doron; Miller, Vincent A; Stephens, Philip J; Subbiah, Vivek; Pal, Sumanta K

    2016-03-01

    In the current study, the authors present a comprehensive genomic profile (CGP)-based study of advanced urothelial carcinoma (UC) designed to detect clinically relevant genomic alterations (CRGAs). DNA was extracted from 40 µm of formalin-fixed, paraffin-embedded sections from 295 consecutive cases of recurrent/metastatic UC. CGP was performed on hybridization-captured, adaptor ligation-based libraries to a mean coverage depth of 688X for all coding exons of 236 cancer-related genes plus 47 introns from 19 genes frequently rearranged in cancer, using process-matched normal control samples as a reference. CRGAs were defined as GAs linked to drugs on the market or currently under evaluation in mechanism-driven clinical trials. All 295 patients assessed were classified with high-grade (International Society of Urological Pathology classification) and advanced stage (stage III/IV American Joint Committee on Cancer) disease, and 294 of 295 patients (99.7%) had at least 1 GA on CGP with a mean of 6.4 GAs per UC (61% substitutions/insertions/deletions, 37% copy number alterations, and 2% fusions). Furthermore, 275 patients (93%) had at least 1 CRGA involving 75 individual genes with a mean of 2.6 CRGAs per UC. The most common CRGAs involved cyclin-dependent kinase inhibitor 2A (CDKN2A) (34%), fibroblast growth factor receptor 3 (FGFR3) (21%), phosphatidylinositol 3-kinase catalytic subunit alpha (PIK3CA) (20%), and ERBB2 (17%). FGFR3 GAs were diverse types and included 10% fusions. ERBB2 GAs were equally divided between amplifications and substitutions. ERBB2 substitutions were predominantly within the extracellular domain and were highly enriched in patients with micropapillary UC (38% of 32 cases vs 5% of 263 nonmicropapillary UC cases; PCancer 2016;122:702-711. © 2015 American Cancer Society. © 2015 American Cancer Society.

  12. ELECTRON-CAPTURE AND β-DECAY RATES FOR sd-SHELL NUCLEI IN STELLAR ENVIRONMENTS RELEVANT TO HIGH-DENSITY O–NE–MG CORES

    International Nuclear Information System (INIS)

    Suzuki, Toshio; Toki, Hiroshi; Nomoto, Ken’ichi

    2016-01-01

    Electron-capture and β-decay rates for nuclear pairs in the sd-shell are evaluated at high densities and high temperatures relevant to the final evolution of electron-degenerate O–Ne–Mg cores of stars with initial masses of 8–10 M ⊙ . Electron capture induces a rapid contraction of the electron-degenerate O–Ne–Mg core. The outcome of rapid contraction depends on the evolutionary changes in the central density and temperature, which are determined by the competing processes of contraction, cooling, and heating. The fate of the stars is determined by these competitions, whether they end up with electron-capture supernovae or Fe core-collapse supernovae. Since the competing processes are induced by electron capture and β-decay, the accurate weak rates are crucially important. The rates are obtained for pairs with A = 20, 23, 24, 25, and 27 by shell-model calculations in the sd-shell with the USDB Hamiltonian. Effects of Coulomb corrections on the rates are evaluated. The rates for pairs with A = 23 and 25 are important for nuclear Urca processes that determine the cooling rate of the O–Ne–Mg core, while those for pairs with A = 20 and 24 are important for the core contraction and heat generation rates in the core. We provide these nuclear rates at stellar environments in tables with fine enough meshes at various densities and temperatures for studies of astrophysical processes sensitive to the rates. In particular, the accurate rate tables are crucially important for the final fates of not only O–Ne–Mg cores but also a wider range of stars, such as C–O cores of lower-mass stars

  13. Safety relevant aspects of the long-term intermediate storage of spent fuel elements and vitrified high-level radioactive wastes; Sicherheitstechnische Aspekte der langfristigen Zwischenlagerung von bestrahlten Brennelementen und verglastem HAW

    Energy Technology Data Exchange (ETDEWEB)

    Ellinger, A.; Geupel, S.; Gewehr, K.; Gmal, B.; Hannstein, V.; Hummelsheim, K.; Kilger, R.; Wagner, M. [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS), Koeln (Germany); Schmidt, G.; Spieth-Achtnich, A. [Oeko-Institut e.V. - Institut fuer angewandte Oekolgie (Germany)

    2010-04-15

    The currently in Germany pursued concept for management of spent fuel from nuclear power plants provides intermediate dry cask storage at the NPP sites until direct disposal in a deep geologic repository. In addition the earlier commissioned centralized dry storage facilities are being used for storage of high level radioactive waste returned from foreign reprocessing of German spent fuel performed so far. The dry interim storage facilities are licensed for 40 years of operation time. According to the German regulations a full scope periodic safety review is not required so far, neither practical experience on dry storage for this period of time is available. With regard to this background the report at hand is dealing with long term effects, which may affect safety of the interim storage during the 40 years period or beyond if appropriate, and with the question, whether additional analyses or monitoring measures may be required. Therefore relevant publications have been evaluated, calculations have been performed as well as a systematic screening with regard to loads and possible ageing effects has been applied to structures and components important for safety of the storage, in order to identify relevant long term effects, which may not have been considered sufficiently so far and to provide proposals for an improved ageing management. The report firstly provides an overview on the current state of technology describing shortly the national and international practice and experience. In the following chapters safety aspects of interim storage with regard to time dependent effects and variations are being analyzed and discussed. Among this not only technical aspects like the long term behavior of fuel elements, canisters and storage systems are addressed, but also operational long term aspects regarding personnel planning, know how conservation, documentation and quality management are taken into account. A separate chapter is dedicated to developing and describing

  14. IDC System Specification Document.

    Energy Technology Data Exchange (ETDEWEB)

    Clifford, David J.

    2014-12-01

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris

  15. INFCE plenary conference documents

    International Nuclear Information System (INIS)

    This document consists of the reports to the First INFCE Plenary Conference (November 1978) by the Working Groups a Plenary Conference of its actions and decisions, the Communique of the Final INFCE Plenary Conference (February 1980), and a list of all documents in the IAEA depository for INFCE

  16. Human Document Project

    NARCIS (Netherlands)

    de Vries, Jeroen; Abelmann, Leon; Manz, A; Elwenspoek, Michael Curt

    2012-01-01

    “The Human Document Project‿ is a project which tries to answer all of the questions related to preserving information about the human race for tens of generations of humans to come or maybe even for a future intelligence which can emerge in the coming thousands of years. This document mainly

  17. Reactive documentation system

    Science.gov (United States)

    Boehnlein, Thomas R.; Kramb, Victoria

    2018-04-01

    Proper formal documentation of computer acquired NDE experimental data generated during research is critical to the longevity and usefulness of the data. Without documentation describing how and why the data was acquired, NDE research teams lose capability such as their ability to generate new information from previously collected data or provide adequate information so that their work can be replicated by others seeking to validate their research. Despite the critical nature of this issue, NDE data is still being generated in research labs without appropriate documentation. By generating documentation in series with data, equal priority is given to both activities during the research process. One way to achieve this is to use a reactive documentation system (RDS). RDS prompts an operator to document the data as it is generated rather than relying on the operator to decide when and what to document. This paper discusses how such a system can be implemented in a dynamic environment made up of in-house and third party NDE data acquisition systems without creating additional burden on the operator. The reactive documentation approach presented here is agnostic enough that the principles can be applied to any operator controlled, computer based, data acquisition system.

  18. Documentation: Records and Reports.

    Science.gov (United States)

    Akers, Michael J

    2017-01-01

    This article deals with documentation to include the beginning of documentation, the requirements of Good Manufacturing Practice reports and records, and the steps that can be taken to minimize Good Manufacturing Practice documentation problems. It is important to remember that documentation for 503a compounding involves the Formulation Record, Compounding Record, Standard Operating Procedures, Safety Data Sheets, etc. For 503b outsourcing facilities, compliance with Current Good Manufacturing Practices is required, so this article is applicable to them. For 503a pharmacies, one can see the development and modification of Good Manufacturing Practice and even observe changes as they are occurring in 503a documentation requirements and anticipate that changes will probably continue to occur. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

  19. Strategy and programs of the research on high-level and long-living radioactive wastes (by right of article L542 of the environment code from December 30, 1991 law). Conjuncture document

    International Nuclear Information System (INIS)

    2003-01-01

    This document gives, in a first part, a brief insight on the main results of the researches carried out in 2002 on the management of high-level and long-living radioactive wastes according to the three research ways defined by the December 30, 1991 law: separation-transmutation, disposal in deep geologic underground, wastes conditioning and storage. The second part of the document is an executive summary of the 2003 edition of the document 'strategy and programs of the researches on the management of high-level and long-living radioactive wastes - SPR 2003'. It presents the content of the different chapters: 1 - researches methodology and implementation of coordinated studies; 2 - researches status 10 years after the enforcement of the law; 3 - the main goals and steps to reach before the 2006 date-line; 4 - the description and analysis of the programs under consideration; 5 - the coordination between French programs; 6 - the international cooperation. (J.S.)

  20. Clinical relevance of consolidation radiotherapy and other main therapeutic issues in primary central nervous system lymphomas treated with upfront high-dose methotrexate

    International Nuclear Information System (INIS)

    Reni, Michele; Ferreri, Andres J.M.; Guha-Thakurta, Nandita; Blay, Jean-Yves; Dell'Oro, Stefania; Biron, Pierre; Hochberg, Fred H.

    2001-01-01

    Purpose: To evaluate the optimal dose of methotrexate (MTX) and the efficacy of other drugs, intrathecal chemotherapy (CHT), and radiotherapy (RT) in primary brain lymphomas. Methods and Materials: Two hundred eighty-eight immunocompetent patients with histologically documented, previously untreated primary brain lymphomas, receiving CHT containing high-dose MTX (≥1 g/m 2 ) with or without RT were selected from 19 prospective series. The impact on survival of the MTX dose ( 2 vs.≥3 g/m 2 ), the main drugs, intrathecal CHT, and combination CHT (mono-CHT vs. poly-CHT) was assessed, according to the intention-to-treat principle. The role of post-CHT irradiation (immediate vs. delayed RT) was evaluated in 119 patients with a complete response to CHT. The whole brain and tumor bed dose ( 2 (p=0.04), thiotepa (p=0.03), and intrathecal CHT (p=0.03) improved the OS, and nitrosoureas (p 0.01) correlated with a worse survival. In multivariate analysis, limited to patients receiving MTX ≥3 g/m 2 , only the addition of cytarabine improved the OS; nitrosoureas reduced MTX efficacy. Of the 119 complete responders, 70 received immediate RT. A RT dose of ≥40 Gy to the whole brain or tumor bed did not improve OS. The 3-year OS was similar between the immediate and delayed RT groups. In multivariate analysis, RT delay had no negative impact on survival. Conclusions: MTX ≥3 g/m 2 seems to improve survival in primary brain lymphoma patients. The efficacy of additional drugs, except for cytarabine, remains unproved. Randomized trials are needed to confirm that RT withdrawal yields no detrimental effect in complete responders

  1. Comparison of historical documents for writership

    Science.gov (United States)

    Ball, Gregory R.; Pu, Danjun; Stritmatter, Roger; Srihari, Sargur N.

    2010-01-01

    Over the last century forensic document science has developed progressively more sophisticated pattern recognition methodologies for ascertaining the authorship of disputed documents. These include advances not only in computer assisted stylometrics, but forensic handwriting analysis. We present a writer verification method and an evaluation of an actual historical document written by an unknown writer. The questioned document is compared against two known handwriting samples of Herman Melville, a 19th century American author who has been hypothesized to be the writer of this document. The comparison led to a high confidence result that the questioned document was written by the same writer as the known documents. Such methodology can be applied to many such questioned documents in historical writing, both in literary and legal fields.

  2. Highly Relevant Mentoring (HRM as a Faculty Development Model for Web-Based Instruction / Highly Relevant Mentoring (HRM (mentorat haute efficacité, un modèle de formation du corps professoral à l’enseignement en réseau

    Directory of Open Access Journals (Sweden)

    Lorraine Carter

    2012-02-01

    Full Text Available This paper describes a faculty development model called the highly relevant mentoring (HRM model; the model includes a framework as well as some practical strategies for meeting the professional development needs of faculty who teach web-based courses. The paper further emphasizes the need for faculty and administrative buy-in for HRM and examines relevant theories that may be used to guide HRM in web-based teaching environments. Of note is that HRM was conceived by the instructional design staff who contributed to this paper before the concept of high impact mentoring appeared in the recent literature (2009. While the model is appropriate in various disciplines and professions, the examples and scenarios provided are drawn from a Canadian university’s experience of using HRM, in conjunction with a pedagogical approach called ICARE, in a variety of nursing courses and programs. Cet article décrit un modèle de formation du personnel enseignant intitulé « highly relevant mentoring (HRM » (mentorat haute efficacité; ce modèle comprend une structure et des stratégies pratiques visant à combler les besoins en formation du corps professoral d’une faculté offrant des cours en réseau. L’article souligne la nécessité d’un appui facultaire et administratif au HRM et étudie les théories pertinentes pouvant servir à guider le HRM dans des milieux d’enseignement en réseau. On notera que le HRM a été conçu par l’équipe de conception de matériel pédagogique qui a contribué à cet article avant l’apparition, dans les publications récentes (2009, du concept de « high impact mentoring » (mentorat à haut rendement. Bien que ce dernier modèle convienne à diverses disciplines et professions, les exemples et les scénarios fournis ici sont tirés de l’expérience d’utilisation du HRM dans une université canadienne, conjointement à une approche pédagogique appelée ICARE, dans une variété de cours et de programmes

  3. TRANSPORTATION SYSTEM REQUIREMENTS DOCUMENT

    International Nuclear Information System (INIS)

    2004-01-01

    This document establishes the Transportation system requirements for the U.S. Department of Energy's (DOE's) Civilian Radioactive Waste Management System (CRWMS). These requirements are derived from the Civilian Radioactive Waste Management System Requirements Document (CRD). The Transportation System Requirements Document (TSRD) was developed in accordance with LP-3.1Q-OCRWM, Preparation, Review, and Approval of Office of National Transportation Level-2 Baseline Requirements. As illustrated in Figure 1, the TSRD forms a part of the DOE Office of Civilian Radioactive Waste Management (OCRWM) Technical Baseline

  4. Project W-320, 241-C-106 sluicing supporting documentation bibliography

    International Nuclear Information System (INIS)

    Bailey, J.W.

    1998-01-01

    This supporting document has been prepared to make the listing of documentation used to develop, or in support of Project W-320, readily retrievable. All documents are sorted by document number and list the document type. Tank 241-C-106 has been included on the High Heat Load Watch List

  5. Applications for electronic documents

    International Nuclear Information System (INIS)

    Beitel, G.A.

    1995-01-01

    This paper discusses the application of electronic media to documents, specifically Safety Analysis Reports (SARs), prepared for Environmental Restoration and Waste Management (ER ampersand WM) programs being conducted for the Department of Energy (DOE) at the Idaho National Engineering Laboratory (INEL). Efforts are underway to upgrade our document system using electronic format. To satisfy external requirements (DOE, State, and Federal), ER ampersand WM programs generate a complement of internal requirements documents including a SAR and Technical Safety Requirements along with procedures and training materials. Of interest, is the volume of information and the difficulty in handling it. A recently prepared ER ampersand WM SAR consists of 1,000 pages of text and graphics; supporting references add 10,000 pages. Other programmatic requirements documents consist of an estimated 5,000 pages plus references

  6. Informational system. Documents management

    Directory of Open Access Journals (Sweden)

    Vladut Iacob

    2009-12-01

    Full Text Available Productivity growing, as well as reducing of operational costs in a company can be achieved by adopting a document management solutions. Such application will allow management and structured and efficient transmission of information within the organization.

  7. Integrated Criteria Document Chromium

    NARCIS (Netherlands)

    Slooff W; Cleven RFMJ; Janus JA; van der Poel P; van Beelen P; Boumans LJM; Canton JH; Eerens HC; Krajnc EI; de Leeuw FAAM; Matthijsen AJCM; van de Meent D; van der Meulen A; Mohn GR; Wijland GC; de Bruijn PJ; van Keulen A; Verburgh JJ; van der Woerd KF

    1990-01-01

    Betreft de engelse versie van rapport 758701001
    Bij dit rapport behoort een appendix onder hetzelfde nummer getiteld: "Integrated Criteria Document Chromium: Effects" Auteurs: Janus JA; Krajnc EI
    (appendix: see 710401002A)

  8. NCDC Archive Documentation Manuals

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Climatic Data Center Tape Deck Documentation library is a collection of over 400 manuals describing NCDC's digital holdings (both historic and current)....

  9. Registration document 2005

    International Nuclear Information System (INIS)

    2005-01-01

    This reference document of Gaz de France provides information and data on the Group activities in 2005: financial informations, business, activities, equipments factories and real estate, trade, capital, organization charts, employment, contracts and research programs. (A.L.B.)

  10. The Horizontal Ice Nucleation Chamber (HINC: INP measurements at conditions relevant for mixed-phase clouds at the High Altitude Research Station Jungfraujoch

    Directory of Open Access Journals (Sweden)

    L. Lacher

    2017-12-01

    Full Text Available In this work we describe the Horizontal Ice Nucleation Chamber (HINC as a new instrument to measure ambient ice-nucleating particle (INP concentrations for conditions relevant to mixed-phase clouds. Laboratory verification and validation experiments confirm the accuracy of the thermodynamic conditions of temperature (T and relative humidity (RH in HINC with uncertainties in T of ±0.4 K and in RH with respect to water (RHw of ±1.5 %, which translates into an uncertainty in RH with respect to ice (RHi of ±3.0 % at T > 235 K. For further validation of HINC as a field instrument, two measurement campaigns were conducted in winters 2015 and 2016 at the High Altitude Research Station Jungfraujoch (JFJ; Switzerland, 3580 m a. s. l.  to sample ambient INPs. During winters 2015 and 2016 the site encountered free-tropospheric conditions 92 and 79 % of the time, respectively. We measured INP concentrations at 242 K at water-subsaturated conditions (RHw = 94 %, relevant for the formation of ice clouds, and in the water-supersaturated regime (RHw = 104 % to represent ice formation occurring under mixed-phase cloud conditions. In winters 2015 and 2016 the median INP concentrations at RHw = 94 % was below the minimum detectable concentration. At RHw = 104 %, INP concentrations were an order of magnitude higher, with median concentrations in winter 2015 of 2.8 per standard liter (std L−1; normalized to standard T of 273 K and pressure, p, of 1013 hPa and 4.7 std L−1 in winter 2016. The measurements are in agreement with previous winter measurements obtained with the Portable Ice Nucleation Chamber (PINC of 2.2 std L−1 at the same location. During winter 2015, two events caused the INP concentrations at RHw = 104 % to significantly increase above the campaign average. First, an increase to 72.1 std L−1 was measured during an event influenced by marine air, arriving at the JFJ

  11. Are PDF Documents Accessible?

    Directory of Open Access Journals (Sweden)

    Mireia Ribera Turró

    2008-09-01

    Full Text Available Adobe PDF is one of the most widely used formats in scientific communications and in administrative documents. In its latest versions it has incorporated structural tags and improvements that increase its level of accessibility. This article reviews the concept of accessibility in the reading of digital documents and evaluates the accessibility of PDF according to the most widely established standards.

  12. 2002 reference document

    International Nuclear Information System (INIS)

    2002-01-01

    This 2002 reference document of the group Areva, provides information on the society. Organized in seven chapters, it presents the persons responsible for the reference document and for auditing the financial statements, information pertaining to the transaction, general information on the company and share capital, information on company operation, changes and future prospects, assets, financial position, financial performance, information on company management and executive board and supervisory board, recent developments and future prospects. (A.L.B.)

  13. LCS Content Document Application

    Science.gov (United States)

    Hochstadt, Jake

    2011-01-01

    My project at KSC during my spring 2011 internship was to develop a Ruby on Rails application to manage Content Documents..A Content Document is a collection of documents and information that describes what software is installed on a Launch Control System Computer. It's important for us to make sure the tools we use everyday are secure, up-to-date, and properly licensed. Previously, keeping track of the information was done by Excel and Word files between different personnel. The goal of the new application is to be able to manage and access the Content Documents through a single database backed web application. Our LCS team will benefit greatly with this app. Admin's will be able to login securely to keep track and update the software installed on each computer in a timely manner. We also included exportability such as attaching additional documents that can be downloaded from the web application. The finished application will ease the process of managing Content Documents while streamlining the procedure. Ruby on Rails is a very powerful programming language and I am grateful to have the opportunity to build this application.

  14. Technical approach document

    International Nuclear Information System (INIS)

    1988-04-01

    This document describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement Remedial Action Plans (RAPs) and final designs that comply with EPS standards. This document is a revision to the original document. Major revisions were made to the sections in riprap selection and sizing, and ground-water; only minor revisions were made to the remainder of the document. The US Nuclear Regulatory Commission (NRC) has prepared a Standard Review Plan (NRC-SRP) which describes factors to be considered by the NRC in approving the RAP. Sections 3.0, 4.0, 5.0, and 7.0 of this document are arranged under the same headings as those used in the NRC-SRP. This approach is adopted in order to facilitate joint use of the documents. Section 2.0 (not included in the NRC-SRP) discusses design considerations; Section 3.0 describes surface-water hydrology and erosion control; Section 4.0 describes geotechnical aspects of pile design; Section 5.0 discusses the Alternate Site Selection Process; Section 6.0 deals with radiological issues (in particular, the design of the radon barrier); Section 7.0 discusses protection of groundwater resources; and Section 8.0 discusses site design criteria for the RAC

  15. The relevance of "non-relevant metabolites" from plant protection products (PPPs) for drinking water: the German view.

    Science.gov (United States)

    Dieter, Hermann H

    2010-03-01

    evaluation of a "non-relevant metabolite", its HRIV is either set as 1.0 microg/l (HRIV(a)) or as 3.0 microg/l (HRIV(b)) for lifelong exposure. In case a HRIV would be exceeded, UBA recommends to keep on a precautionary action value (PAV) of 10 microg/l for each "non-relevant metabolite". The HRIV(b) is similar to the maximal value derived by application of the TTC-concept for Cramer Class III (4.5 microg/l). The HRIV(a) and the PAV are similar to values in the EU-guidance document for assessing "non-relevant metabolites" in ground water, with the important difference that the drinking water PAV is not intended to be tolerated for permanent exposure. Drinking water containing "non-relevant metabolites" below the respective HRIVs can also be considered as being sufficiently protective against toxicologically relevant oxidative transformation products which may be formed from "non-relevant metabolites" during drinking water treatment with ozone. However, even drinking water where one or several "non-relevant metabolites" are detected above substance-specific HRIVs is suited for human consumption without health risks. Only in special cases (relatively high "non-relevant metabolite" - concentrations), it could be indicated to examine the finished water for transformation products after treatment with ozone if there are no further treatment steps to eliminate or degrade polar compounds. UBA's "non-relevant metabolite-Recommendation" from April 2008 was positively picked up in 2009 by four important stakeholders in the domain of drinking water management as part of a voluntary cooperation agreement. The aim of such cooperation is to limit the transport of "non-relevant metabolites" into the drinking water to the functionally (and agriculturally) unavoidable extent and insofar to meet special precautionary demands. (c) 2009 Elsevier Inc. All rights reserved.

  16. Securing Document Warehouses against Brute Force Query Attacks

    Directory of Open Access Journals (Sweden)

    Sergey Vladimirovich Zapechnikov

    2017-04-01

    Full Text Available The paper presents the scheme of data management and protocols for securing document collection against adversary users who try to abuse their access rights to find out the full content of confidential documents. The configuration of secure document retrieval system is described and a suite of protocols among the clients, warehouse server, audit server and database management server is specified. The scheme makes it infeasible for clients to establish correspondence between the documents relevant to different search queries until a moderator won’t give access to these documents. The proposed solution allows ensuring higher security level for document warehouses.

  17. Clustering document fragments using background color and texture information

    Science.gov (United States)

    Chanda, Sukalpa; Franke, Katrin; Pal, Umapada

    2012-01-01

    Forensic analysis of questioned documents sometimes can be extensively data intensive. A forensic expert might need to analyze a heap of document fragments and in such cases to ensure reliability he/she should focus only on relevant evidences hidden in those document fragments. Relevant document retrieval needs finding of similar document fragments. One notion of obtaining such similar documents could be by using document fragment's physical characteristics like color, texture, etc. In this article we propose an automatic scheme to retrieve similar document fragments based on visual appearance of document paper and texture. Multispectral color characteristics using biologically inspired color differentiation techniques are implemented here. This is done by projecting document color characteristics to Lab color space. Gabor filter-based texture analysis is used to identify document texture. It is desired that document fragments from same source will have similar color and texture. For clustering similar document fragments of our test dataset we use a Self Organizing Map (SOM) of dimension 5×5, where the document color and texture information are used as features. We obtained an encouraging accuracy of 97.17% from 1063 test images.

  18. Diagnosing congenital malaria in a high-transmission setting: clinical relevance and usefulness of P.falciparum HRP2-based testing

    NARCIS (Netherlands)

    Natama, Hamtandi Magloire; Ouedraogo, Delwendé Florence; Sorgho, Hermann; Rovira-Vallbona, Eduard; Serra-Casas, Elisa; Somé, M. Athanase; Coulibaly-Traoré, Maminata; Mens, Petra F.; Kestens, Luc; Tinto, Halidou; Rosanas-Urgell, Anna

    2017-01-01

    Congenital malaria diagnosis is challenging due to frequently observed low parasite density infections, while their clinical relevance during early infancy is not well characterized. In Nanoro health district (Burkina Faso), we determined the prevalence of congenital malaria by real-time

  19. High rates of clinically relevant incidental findings by total-body CT scanning in trauma patients; results of the REACT-2 trial

    Energy Technology Data Exchange (ETDEWEB)

    Treskes, K.; Bos, S.A.; Sierink, J.C.; Luitse, J.S.K.; Goslings, J.C. [Academic Medical Center, Trauma Unit, Department of Surgery, Amsterdam (Netherlands); Beenen, L.F.M. [Academic Medical Center, Department of Radiology, Amsterdam (Netherlands); Edwards, M.J.R. [Radboud University Medical Center, Department of Trauma and emergency surgery, Nijmegen (Netherlands); Beuker, B.J.A. [University Medical Center Groningen, Trauma Unit, Department of Surgery, Groningen (Netherlands); Muradin, G.S.R. [University Medical Center Rotterdam, Department of Radiology, Erasmus MC, Rotterdam (Netherlands); Hohmann, J. [University of Basel Hospital, Department of Radiology and Nuclear Medicine, Basel (Switzerland); Hollmann, M.W. [Academic Medical Center, Department of Anaesthesiology, Amsterdam (Netherlands); Dijkgraaf, M.G.W. [Academic Medical Center, Clinical Research Unit, Amsterdam (Netherlands); Collaboration: REACT-2 study group

    2017-06-15

    To determine whether there is a difference in frequency and clinical relevance of incidental findings detected by total-body computed tomography scanning (TBCT) compared to those by the standard work-up (STWU) with selective computed tomography (CT) scanning. Trauma patients from five trauma centres were randomized between April 2011 and January 2014 to TBCT imaging or STWU consisting of conventional imaging with selective CT scanning. Incidental findings were divided into three categories: 1) major finding, may cause mortality; 2) moderate finding, may cause morbidity; and 3) minor finding, hardly relevant. Generalized estimating equations were applied to assess differences in incidental findings. In total, 1083 patients were enrolled, of which 541 patients (49.9 %) were randomized for TBCT and 542 patients (50.1 %) for STWU. Major findings were detected in 23 patients (4.3 %) in the TBCT group compared to 9 patients (1.7 %) in the STWU group (adjusted rate ratio 2.851; 95%CI 1.337-6.077; p < 0.007). Findings of moderate relevance were detected in 120 patients (22.2 %) in the TBCT group compared to 86 patients (15.9 %) in the STWU group (adjusted rate ratio 1.421; 95%CI 1.088-1.854; p < 0.010). Compared to selective CT scanning, more patients with clinically relevant incidental findings can be expected by TBCT scanning. (orig.)

  20. Back to the basics: Identifying and addressing underlying challenges in achieving high quality and relevant health statistics for indigenous populations in Canada.

    Science.gov (United States)

    Smylie, Janet; Firestone, Michelle

    Canada is known internationally for excellence in both the quality and public policy relevance of its health and social statistics. There is a double standard however with respect to the relevance and quality of statistics for Indigenous populations in Canada. Indigenous specific health and social statistics gathering is informed by unique ethical, rights-based, policy and practice imperatives regarding the need for Indigenous participation and leadership in Indigenous data processes throughout the spectrum of indicator development, data collection, management, analysis and use. We demonstrate how current Indigenous data quality challenges including misclassification errors and non-response bias systematically contribute to a significant underestimate of inequities in health determinants, health status, and health care access between Indigenous and non-Indigenous people in Canada. The major quality challenge underlying these errors and biases is the lack of Indigenous specific identifiers that are consistent and relevant in major health and social data sources. The recent removal of an Indigenous identity question from the Canadian census has resulted in further deterioration of an already suboptimal system. A revision of core health data sources to include relevant, consistent, and inclusive Indigenous self-identification is urgently required. These changes need to be carried out in partnership with Indigenous peoples and their representative and governing organizations.

  1. Segmentation of complex document

    Directory of Open Access Journals (Sweden)

    Souad Oudjemia

    2014-06-01

    Full Text Available In this paper we present a method for segmentation of documents image with complex structure. This technique based on GLCM (Grey Level Co-occurrence Matrix used to segment this type of document in three regions namely, 'graphics', 'background' and 'text'. Very briefly, this method is to divide the document image, in block size chosen after a series of tests and then applying the co-occurrence matrix to each block in order to extract five textural parameters which are energy, entropy, the sum entropy, difference entropy and standard deviation. These parameters are then used to classify the image into three regions using the k-means algorithm; the last step of segmentation is obtained by grouping connected pixels. Two performance measurements are performed for both graphics and text zones; we have obtained a classification rate of 98.3% and a Misclassification rate of 1.79%.

  2. SCP Tools user's guide: A knowledge base toolbox for documenting relationships among high-level issues and site studies planned for characterization of a repository site

    International Nuclear Information System (INIS)

    Korns, D.E.; Troy, K.S.

    1988-03-01

    This document describes a personal computer knowledge base system that ranges from issue identification to performance allocation of mined geologic disposal system site characteristics. With SCP Tools, a user can describe a system configuration, identify information needs and parameters and allocate performance of selected system characteristics. SCP Tools allows the user to define information needs for resolution of an issue; parameters required for an information need; measures of performance for parameters, and then link supporting parameters to performance parameters and performance parameters to performance measures. All this is done with computer tools that create non-redundant facts stored in a knowledge base. Unlike most information systems, the SCP Tools remember which facts were already collected, thus allowing greater flexibility and speed in appending facts and reducing the amount of hard disk storage

  3. La Documentation photographique

    Directory of Open Access Journals (Sweden)

    Magali Hamm

    2009-03-01

    Full Text Available La Documentation photographique, revue destinée aux enseignants et étudiants en histoire-géographie, place l’image au cœur de sa ligne éditoriale. Afin de suivre les évolutions actuelles de la géographie, la collection propose une iconographie de plus en plus diversifiée : cartes, photographies, mais aussi caricatures, une de journal ou publicité, toutes étant considérées comme un document géographique à part entière. Car l’image peut se faire synthèse ; elle peut au contraire montrer les différentes facettes d’un objet ; souvent elle permet d’incarner des phénomènes géographiques. Associées à d’autres documents, les images aident les enseignants à initier leurs élèves à des raisonnements géographiques complexes. Mais pour apprendre à les lire, il est fondamental de les contextualiser, de les commenter et d’interroger leur rapport au réel.The Documentation photographique, magazine dedicated to teachers and students in History - Geography, places the image at the heart of its editorial line. In order to follow the evolutions of Geography, the collection presents a more and more diversified iconography: maps, photographs, but also drawings or advertisements, all this documents being considered as geographical ones. Because image can be a synthesis; on the contrary it can present the different facets of a same object; often it enables to portray geographical phenomena. Related to other documents, images assist the teachers in the students’ initiation to complex geographical reasoning. But in order to learn how to read them, it is fundamental to contextualize them, comment them and question their relations with reality.

  4. Customer Communication Document

    Science.gov (United States)

    2009-01-01

    This procedure communicates to the Customers of the Automation, Robotics and Simulation Division (AR&SD) Dynamics Systems Test Branch (DSTB) how to obtain services of the Six-Degrees-Of-Freedom Dynamic Test System (SDTS). The scope includes the major communication documents between the SDTS and its Customer. It established the initial communication and contact points as well as provides the initial documentation in electronic media for the customer. Contact the SDTS Manager (SM) for the names of numbers of the current contact points.

  5. Extractive Summarisation of Medical Documents

    Directory of Open Access Journals (Sweden)

    Abeed Sarker

    2012-09-01

    Full Text Available Background Evidence Based Medicine (EBM practice requires practitioners to extract evidence from published medical research when answering clinical queries. Due to the time-consuming nature of this practice, there is a strong motivation for systems that can automatically summarise medical documents and help practitioners find relevant information. Aim The aim of this work is to propose an automatic query-focused, extractive summarisation approach that selects informative sentences from medical documents. MethodWe use a corpus that is specifically designed for summarisation in the EBM domain. We use approximately half the corpus for deriving important statistics associated with the best possible extractive summaries. We take into account factors such as sentence position, length, sentence content, and the type of the query posed. Using the statistics from the first set, we evaluate our approach on a separate set. Evaluation of the qualities of the generated summaries is performed automatically using ROUGE, which is a popular tool for evaluating automatic summaries. Results Our summarisation approach outperforms all baselines (best baseline score: 0.1594; our score 0.1653. Further improvements are achieved when query types are taken into account. Conclusion The quality of extractive summarisation in the medical domain can be significantly improved by incorporating domain knowledge and statistics derived from a specialised corpus. Such techniques can therefore be applied for content selection in end-to-end summarisation systems.

  6. Documents on Disarmament.

    Science.gov (United States)

    Arms Control and Disarmament Agency, Washington, DC.

    This publication, latest in a series of volumes issued annually since 1960, contains primary source documents on arms control and disarmament developments during 1969. The main chronological arrangement is supplemented by both chronological and topical lists of contents. Other reference aids include a subject/author index, and lists of…

  7. ROOT Reference Documentation

    CERN Document Server

    Fuakye, Eric Gyabeng

    2017-01-01

    A ROOT Reference Documentation has been implemented to generate all the lists of libraries needed for each ROOT class. Doxygen has no option to generate or add the lists of libraries for each ROOT class. Therefore shell scripting and a basic C++ program was employed to import the lists of libraries needed by each ROOT class.

  8. Client Oriented Management Documents.

    Science.gov (United States)

    Limaye, Mohan R.; Hightower, Rick

    Noting that accounting reports, including management advisory service (MAS) studies, reports on internal control, and tax memoranda, often appear rather dense and heavy in style--partly because of the legal environment's demand for careful expression and partly because such documents convey very complex information--this paper presents four…

  9. Using Primary Source Documents.

    Science.gov (United States)

    Mintz, Steven

    2003-01-01

    Explores the use of primary sources when teaching about U.S. slavery. Includes primary sources from the Gilder Lehrman Documents Collection (New York Historical Society) to teach about the role of slaves in the Revolutionary War, such as a proclamation from Lord Dunmore offering freedom to slaves who joined his army. (CMK)

  10. QA programme documentation

    International Nuclear Information System (INIS)

    Scheibelt, L.

    1980-01-01

    The present paper deals with the following topics: The need for a documented Q.A. program; Establishing a Q.A. program; Q.A. activities; Fundamental policies; Q.A. policies; Quality objectives Q.A. manual. (orig./RW)

  11. Student Problems with Documentation.

    Science.gov (United States)

    Freimer, Gloria R.; Perry, Margaret M.

    1986-01-01

    Interviews with faculty, a survey of 20 students, and examination of style manuals revealed that students are confused by inconsistencies in and multiplicity of styles when confronted with writing and documenting a research paper. Librarians are urged to teach various citation formats and work for adoption of standardization. (17 references) (EJS)

  12. Documentation of spectrom-41

    International Nuclear Information System (INIS)

    Svalstad, D.K.

    1989-01-01

    SPECTROM-41 is a finite element heat transfer computer program developed to analyze thermal problems related to nuclear waste disposal. The code is part of the SPECTROM (Special Purpose Engineering Codes for Thermal/ROck Mechanics) series of special purpose finite element programs that are continually being developed by RE/SPEC Inc. (RSI) to address the many unique formations. This document presents the theoretical basis for the mathematical model, the finite element formulation of the program, and a description of the input data for the program, along with details about program support and continuing documentation. The documentation is intended to satisfy the requirements and guidelines outlined in NUREG-0856. The principal component model used in the programs based on Fourier's law of conductance. Numerous program options provide the capability of considering various boundary conditions, material stratification and anisotropy, and time-dependent heat generation that are characteristic of problems involving the disposal of nuclear waste in geologic formation. Numerous verification problems are included in the documentation in addition to highlights of past and ongoing verification and validation efforts. A typical repository problem is solving using SPECTROM-41 to demonstrate the use of the program in addressing problems related to the disposal of nuclear waste

  13. Text document classification

    Czech Academy of Sciences Publication Activity Database

    Novovičová, Jana

    č. 62 (2005), s. 53-54 ISSN 0926-4981 R&D Projects: GA AV ČR IAA2075302; GA AV ČR KSK1019101; GA MŠk 1M0572 Institutional research plan: CEZ:AV0Z10750506 Keywords : document representation * categorization * classification Subject RIV: BD - Theory of Information

  14. Course documentation report

    DEFF Research Database (Denmark)

    Buus, Lillian; Bygholm, Ann; Walther, Tina Dyngby Lyng

    A documentation report on the three pedagogical courses developed during the MVU project period. The report describes the three processes taking departure in the structure and material avaiable at the virtual learning environment. Also the report describes the way the two of the courses developed...

  15. Documents and legal texts

    International Nuclear Information System (INIS)

    2017-01-01

    This section treats of the following documents and legal texts: 1 - Belgium 29 June 2014 - Act amending the Act of 22 July 1985 on Third-Party Liability in the Field of Nuclear Energy; 2 - Belgium, 7 December 2016. - Act amending the Act of 22 July 1985 on Third-Party Liability in the Field of Nuclear Energy

  16. Making Deferred Taxes Relevant

    NARCIS (Netherlands)

    Brouwer, Arjan; Naarding, Ewout

    2018-01-01

    We analyse the conceptual problems in current accounting for deferred taxes and provide solutions derived from the literature in order to make International Financial Reporting Standards (IFRS) deferred tax numbers value-relevant. In our view, the empirical results concerning the value relevance of

  17. Parsimonious relevance models

    NARCIS (Netherlands)

    Meij, E.; Weerkamp, W.; Balog, K.; de Rijke, M.; Myang, S.-H.; Oard, D.W.; Sebastiani, F.; Chua, T.-S.; Leong, M.-K.

    2008-01-01

    We describe a method for applying parsimonious language models to re-estimate the term probabilities assigned by relevance models. We apply our method to six topic sets from test collections in five different genres. Our parsimonious relevance models (i) improve retrieval effectiveness in terms of

  18. Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture

    Science.gov (United States)

    Sanfilippo, Antonio [Richland, WA; Calapristi, Augustin J [West Richland, WA; Crow, Vernon L [Richland, WA; Hetzler, Elizabeth G [Kennewick, WA; Turner, Alan E [Kennewick, WA

    2009-12-22

    Document clustering methods, document cluster label disambiguation methods, document clustering apparatuses, and articles of manufacture are described. In one aspect, a document clustering method includes providing a document set comprising a plurality of documents, providing a cluster comprising a subset of the documents of the document set, using a plurality of terms of the documents, providing a cluster label indicative of subject matter content of the documents of the cluster, wherein the cluster label comprises a plurality of word senses, and selecting one of the word senses of the cluster label.

  19. A Compositional Relevance Model for Adaptive Information Retrieval

    Science.gov (United States)

    Mathe, Nathalie; Chen, James; Lu, Henry, Jr. (Technical Monitor)

    1994-01-01

    There is a growing need for rapid and effective access to information in large electronic documentation systems. Access can be facilitated if information relevant in the current problem solving context can be automatically supplied to the user. This includes information relevant to particular user profiles, tasks being performed, and problems being solved. However most of this knowledge on contextual relevance is not found within the contents of documents, and current hypermedia tools do not provide any easy mechanism to let users add this knowledge to their documents. We propose a compositional relevance network to automatically acquire the context in which previous information was found relevant. The model records information on the relevance of references based on user feedback for specific queries and contexts. It also generalizes such information to derive relevant references for similar queries and contexts. This model lets users filter information by context of relevance, build personalized views of documents over time, and share their views with other users. It also applies to any type of multimedia information. Compared to other approaches, it is less costly and doesn't require any a priori statistical computation, nor an extended training period. It is currently being implemented into the Computer Integrated Documentation system which enables integration of various technical documents in a hypertext framework.

  20. Technical approach document

    International Nuclear Information System (INIS)

    1989-12-01

    The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs

  1. Areva - 2011 Reference document

    International Nuclear Information System (INIS)

    2011-01-01

    After having indicated the person responsible of this document and the legal account auditors, and provided some financial information, this document gives an overview of the different risk factors existing in the company: law risks, industrial and environmental risks, operational risks, risks related to large projects, market and liquidity risks. Then, after having recalled the history and evolution of the company and the evolution of its investments over the last five years, it proposes an overview of Areva's activities on the markets of nuclear energy and renewable energies, of its clients and suppliers, of its strategy, of the activities of its different departments. Other information are provided: company's flow chart, estate properties (plants, equipment), an analysis of its financial situation, its research and development policy, the present context, profit previsions or estimations, management organization and operation

  2. Documentation of Concurrent programs.

    Science.gov (United States)

    1983-07-01

    preparing the documentation formats, and Tom McDonald for preparing the supplemental materials and statistical analyses. 16 [ 1 -16- I j REFERENCES I Boehm...34*h (eeeeeotop to enter h, to IAmlOCSot land ,uoMXM to R&’T- kfC ’Cod At 1*1 ,lgo: 0) 4 O ~ en ttR .I SA’ tgOhegl that ’t to 40n. .hi &ren a ~ O toll s

  3. SANSMIC design document.

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Paula D. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Rudeen, David Keith [GRAM, Inc., Albuquerque, NM (United States)

    2015-07-01

    The United States Strategic Petroleum Reserve (SPR) maintains an underground storage system consisting of caverns that were leached or solution mined in four salt domes located near the Gulf of Mexico in Texas and Louisiana. The SPR comprises more than 60 active caverns containing approximately 700 million barrels of crude oil. Sandia National Labo- ratories (SNL) is the geotechnical advisor to the SPR. As the most pressing need at the inception of the SPR was to create and fill storage volume with oil, the decision was made to leach the caverns and fill them simultaneously (leach-fill). Therefore, A.J. Russo developed SANSMIC in the early 1980s which allows for a transient oil-brine interface (OBI) making it possible to model leach-fill and withdrawal operations. As the majority of caverns are currently filled to storage capacity, the primary uses of SANSMIC at this time are related to the effects of small and large withdrawals, expansion of existing caverns, and projecting future pillar to diameter ratios. SANSMIC was identified by SNL as a priority candidate for qualification. This report continues the quality assurance (QA) process by documenting the "as built" mathematical and numerical models that comprise this document. The pro- gram flow is outlined and the models are discussed in detail. Code features that were added later or were not documented previously have been expounded. No changes in the code's physics have occurred since the original documentation (Russo, 1981, 1983) although recent experiments may yield improvements to the temperature and plume methods in the future.

  4. Electronic Braille Document Reader

    OpenAIRE

    Arif, Shahab; Holmes, Violeta

    2013-01-01

    This paper presents an investigation into developing a portable Braille device which would allow visually impaired individuals to read electronic documents by actuating Braille text on a finger. Braille books tend to be bulky in size due to the minimum size requirements for each Braille cell. E-books can be read in Braille using refreshable Braille displays connected to a computer. However, the refreshable Braille displays are expensive, bulky and are not portable. These factors restrict blin...

  5. Electronic Braille Document Reader

    OpenAIRE

    Arif, S.

    2012-01-01

    An investigation was conducted into developing a portable Braille device which would allow visually impaired individuals to read electronic documents by actuating Braille text on a finger. Braille books tend to be bulky in size due to the minimum size requirements for each Braille cell. E-books can be read in Braille using refreshable Braille displays connected to a computer. However, the refreshable Braille displays are expensive, bulky and are not portable. These factors restrict blind and ...

  6. SGHWR - quality assurance documentation

    International Nuclear Information System (INIS)

    Garrard, R.S.; Caulfield, J.

    1976-01-01

    The quality assurance program for a modern power station such as an SGHWR type reactor plant must include a record of quality achievement. The case history record which is evidence of the actual quality of the plant and is a data bank of design, manufacture, and results of inspections and tests, is described. Documentation distribution, which keeps all key areas informed of plant item quality status, and the retrieval and storage of information, are briefly discussed. (U.K.)

  7. AUDIT plan documenting method

    International Nuclear Information System (INIS)

    Cornecsu, M.

    1995-01-01

    The work describes a method of documenting the AUDIT plan upon the basis of two quantitative elements resulting from quality assurance program appraisal system function implementation degree as established from the latest AUDIT performed an system function weight in QAP, respectively, appraised by taking into account their significance for the activities that are to be performed in the period for which the AUDITs are planned. (Author) 3 Figs., 2 Refs

  8. AREVA - 2013 Reference document

    International Nuclear Information System (INIS)

    2014-01-01

    This Reference Document contains information on the AREVA group's objectives, prospects and development strategies, as well as estimates of the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the Reference Document; 2 - Statutory auditors; 3 - Selected financial information; 4 - Description of major risks confronting the company; 5 - Information about the issuer; 6 - Business overview; 7 - Organizational structure; 8 - Property, plant and equipment; 9 - Situation and activities of the company and its subsidiaries; 10 - Capital resources; 11 - Research and development programs, patents and licenses; 12 - Trend information; 13 - Profit forecasts or estimates; 14 - Management and supervisory bodies; 15 - Compensation and benefits; 16 - Functioning of the management and supervisory bodies; 17 - Human resources information; 18 - Principal shareholders; 19 - Transactions with related parties; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information; 22 - Major contracts; 23 - Third party information, statements by experts and declarations of interest; 24 - Documents on display; 25 - Information on holdings; Appendix 1: report of the supervisory board chairman on the preparation and organization of the board's activities and internal control procedures; Appendix 2: statutory auditors' reports; Appendix 3: environmental report; Appendix 4: non-financial reporting methodology and independent third-party report on social, environmental and societal data; Appendix 5: ordinary and extraordinary general shareholders' meeting; Appendix 6: values charter; Appendix 7: table of concordance of the management report; glossaries

  9. Content Documents Management

    Science.gov (United States)

    Muniz, R.; Hochstadt, J.; Boelke J.; Dalton, A.

    2011-01-01

    The Content Documents are created and managed under the System Software group with. Launch Control System (LCS) project. The System Software product group is lead by NASA Engineering Control and Data Systems branch (NEC3) at Kennedy Space Center. The team is working on creating Operating System Images (OSI) for different platforms (i.e. AIX, Linux, Solaris and Windows). Before the OSI can be created, the team must create a Content Document which provides the information of a workstation or server, with the list of all the software that is to be installed on it and also the set where the hardware belongs. This can be for example in the LDS, the ADS or the FR-l. The objective of this project is to create a User Interface Web application that can manage the information of the Content Documents, with all the correct validations and filters for administrator purposes. For this project we used one of the most excellent tools in agile development applications called Ruby on Rails. This tool helps pragmatic programmers develop Web applications with Rails framework and Ruby programming language. It is very amazing to see how a student can learn about OOP features with the Ruby language, manage the user interface with HTML and CSS, create associations and queries with gems, manage databases and run a server with MYSQL, run shell commands with command prompt and create Web frameworks with Rails. All of this in a real world project and in just fifteen weeks!

  10. Toward Documentation of Program Evolution

    DEFF Research Database (Denmark)

    Vestdam, Thomas; Nørmark, Kurt

    2005-01-01

    The documentation of a program often falls behind the evolution of the program source files. When this happens it may be attractive to shift the documentation mode from updating the documentation to documenting the evolution of the program. This paper describes tools that support the documentatio....... It is concluded that our approach can help revitalize older documentation, and that discovery of the fine grained program evolution steps help the programmer in documenting the evolution of the program....

  11. Predicting Document Retrieval System Performance: An Expected Precision Measure.

    Science.gov (United States)

    Losee, Robert M., Jr.

    1987-01-01

    Describes an expected precision (EP) measure designed to predict document retrieval performance. Highlights include decision theoretic models; precision and recall as measures of system performance; EP graphs; relevance feedback; and computing the retrieval status value of a document for two models, the Binary Independent Model and the Two Poisson…

  12. Semantic Similarity between Web Documents Using Ontology

    Science.gov (United States)

    Chahal, Poonam; Singh Tomer, Manjeet; Kumar, Suresh

    2018-06-01

    The World Wide Web is the source of information available in the structure of interlinked web pages. However, the procedure of extracting significant information with the assistance of search engine is incredibly critical. This is for the reason that web information is written mainly by using natural language, and further available to individual human. Several efforts have been made in semantic similarity computation between documents using words, concepts and concepts relationship but still the outcome available are not as per the user requirements. This paper proposes a novel technique for computation of semantic similarity between documents that not only takes concepts available in documents but also relationships that are available between the concepts. In our approach documents are being processed by making ontology of the documents using base ontology and a dictionary containing concepts records. Each such record is made up of the probable words which represents a given concept. Finally, document ontology's are compared to find their semantic similarity by taking the relationships among concepts. Relevant concepts and relations between the concepts have been explored by capturing author and user intention. The proposed semantic analysis technique provides improved results as compared to the existing techniques.

  13. Semantic Similarity between Web Documents Using Ontology

    Science.gov (United States)

    Chahal, Poonam; Singh Tomer, Manjeet; Kumar, Suresh

    2018-03-01

    The World Wide Web is the source of information available in the structure of interlinked web pages. However, the procedure of extracting significant information with the assistance of search engine is incredibly critical. This is for the reason that web information is written mainly by using natural language, and further available to individual human. Several efforts have been made in semantic similarity computation between documents using words, concepts and concepts relationship but still the outcome available are not as per the user requirements. This paper proposes a novel technique for computation of semantic similarity between documents that not only takes concepts available in documents but also relationships that are available between the concepts. In our approach documents are being processed by making ontology of the documents using base ontology and a dictionary containing concepts records. Each such record is made up of the probable words which represents a given concept. Finally, document ontology's are compared to find their semantic similarity by taking the relationships among concepts. Relevant concepts and relations between the concepts have been explored by capturing author and user intention. The proposed semantic analysis technique provides improved results as compared to the existing techniques.

  14. Waste Management System Requirement document

    International Nuclear Information System (INIS)

    1990-04-01

    This volume defines the top level technical requirements for the Monitored Retrievable Storage (MRS) facility. It is designed to be used in conjunction with Volume 1, General System Requirements. Volume 3 provides a functional description expanding the requirements allocated to the MRS facility in Volume 1 and, when appropriate, elaborates on requirements by providing associated performance criteria. Volumes 1 and 3 together convey a minimum set of requirements that must be satisfied by the final MRS facility design without unduly constraining individual design efforts. The requirements are derived from the Nuclear Waste Policy Act of 1982 (NWPA), the Nuclear Waste Policy Amendments Act of 1987 (NWPAA), the Environmental Protection Agency's (EPA) Environmental Standards for the Management and Disposal of Spent Nuclear Fuel (40 CFR 191), NRC Licensing Requirements for the Independent Storage of Spent Nuclear and High-Level Radioactive Waste (10 CFR 72), and other federal statutory and regulatory requirements, and major program policy decisions. This document sets forth specific requirements that will be fulfilled. Each subsequent level of the technical document hierarchy will be significantly more detailed and provide further guidance and definition as to how each of these requirements will be implemented in the design. Requirements appearing in Volume 3 are traceable into the MRS Design Requirements Document. Section 2 of this volume provides a functional breakdown for the MRS facility. 1 tab

  15. AREVA 2009 reference document

    International Nuclear Information System (INIS)

    2009-01-01

    This Reference Document contains information on the AREVA group's objectives, prospects and development strategies. It contains information on the markets, market shares and competitive position of the AREVA group. This information provides an adequate picture of the size of these markets and of the AREVA group's competitive position. Content: 1 - Person responsible for the Reference Document and Attestation by the person responsible for the Reference Document; 2 - Statutory and Deputy Auditors; 3 - Selected financial information; 4 - Risks: Risk management and coverage, Legal risk, Industrial and environmental risk, Operating risk, Risk related to major projects, Liquidity and market risk, Other risk; 5 - Information about the issuer: History and development, Investments; 6 - Business overview: Markets for nuclear power and renewable energies, AREVA customers and suppliers, Overview and strategy of the group, Business divisions, Discontinued operations: AREVA Transmission and Distribution; 7 - Organizational structure; 8 - Property, plant and equipment: Principal sites of the AREVA group, Environmental issues that may affect the issuer's; 9 - Analysis of and comments on the group's financial position and performance: Overview, Financial position, Cash flow, Statement of financial position, Events subsequent to year-end closing for 2009; 10 - Capital Resources; 11 - Research and development programs, patents and licenses; 12 -trend information: Current situation, Financial objectives; 13 - Profit forecasts or estimates; 14 - Administrative, management and supervisory bodies and senior management; 15 - Compensation and benefits; 16 - Functioning of corporate bodies; 17 - Employees; 18 - Principal shareholders; 19 - Transactions with related parties: French state, CEA, EDF group; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information: Share capital, Certificate of incorporation and by-laws; 22 - Major

  16. Viviendo el documental

    OpenAIRE

    Álvarez Moreno, Víctor

    2017-01-01

    En el siguiente trabajo se recoge el proceso de realización y elaboración de un documental en 360 grados sobre la catedral de Valladolid bajo el título Reconstruyendo la catedral. El trabajo une realidad virtual con narrativa periodística. La realidad virtual es una herramienta que permite transformar al espectador en un testigo de la historia. En este caso, se muestra lo que pudo ser la catedral de Valladolid, cuyo objetivo era convertirse en la catedral más grande del territorio europeo. ...

  17. Documents and legal texts

    International Nuclear Information System (INIS)

    2016-01-01

    This section treats of the following documents and legal texts: 1 - Brazil: Law No. 13,260 of 16 March 2016 (To regulate the provisions of item XLIII of Article 5 of the Federal Constitution on terrorism, dealing with investigative and procedural provisions and redefining the concept of a terrorist organisation; and amends Laws No. 7,960 of 21 December 1989 and No. 12,850 of 2 August 2013); 2 - India: The Atomic Energy (Amendment) Act, 2015; Department Of Atomic Energy Notification (Civil Liability for Nuclear Damage); 3 - Japan: Act on Subsidisation, etc. for Nuclear Damage Compensation Funds following the implementation of the Convention on Supplementary Compensation for Nuclear Damage

  18. AREVA - 2012 Reference document

    International Nuclear Information System (INIS)

    2013-03-01

    After a presentation of the person responsible for this Reference Document, of statutory auditors, and of a summary of financial information, this report address the different risk factors: risk management and coverage, legal risk, industrial and environmental risk, operational risk, risk related to major projects, liquidity and market risk, and other risks (related to political and economic conditions, to Group's structure, and to human resources). The next parts propose information about the issuer, a business overview (markets for nuclear power and renewable energies, customers and suppliers, group's strategy, operations), a brief presentation of the organizational structure, a presentation of properties, plants and equipment (principal sites, environmental issues which may affect these items), analysis and comments on the group's financial position and performance, a presentation of capital resources, a presentation of research and development activities (programs, patents and licenses), a brief description of financial objectives and profit forecasts or estimates, a presentation of administration, management and supervision bodies, a description of the operation of corporate bodies, an overview of personnel, of principal shareholders, and of transactions with related parties, a more detailed presentation of financial information concerning assets, financial positions and financial performance. Addition information regarding share capital is given, as well as an indication of major contracts, third party information, available documents, and information on holdings

  19. AREVA 2010 Reference document

    International Nuclear Information System (INIS)

    2010-01-01

    After a presentation of the person responsible for this document, and of statutory auditors, this report proposes some selected financial information. Then, it addresses, presents and comments the different risk factors: risk management and coverage, legal risk, industrial and environmental risk, operational risk, risks related to major projects, liquidity and market risk, and other risk. Then, after a presentation of the issuer, it proposes a business overview (markets for nuclear and renewable energies, AREVA customers and suppliers, strategy, activities), a presentation of the organizational structure, a presentation of AREVA properties, plants and equipment (sites, environmental issues), an analysis and comment of the group's financial position and performance, a presentation of its capital resources, an overview of its research and development activities, programs, patents and licenses. It indicates profit forecast and estimates, presents the administrative, management and supervisory bodies, and compensation and benefits amounts, reports of the functioning of corporate bodies. It describes the human resource company policy, indicates the main shareholders and transactions with related parties. It proposes financial information concerning assets, financial positions and financial performance. This document contains its French and its English versions

  20. Regulatory guidance document

    International Nuclear Information System (INIS)

    1994-05-01

    The Office of Civilian Radioactive Waste Management (OCRWM) Program Management System Manual requires preparation of the OCRWM Regulatory Guidance Document (RGD) that addresses licensing, environmental compliance, and safety and health compliance. The document provides: regulatory compliance policy; guidance to OCRWM organizational elements to ensure a consistent approach when complying with regulatory requirements; strategies to achieve policy objectives; organizational responsibilities for regulatory compliance; guidance with regard to Program compliance oversight; and guidance on the contents of a project-level Regulatory Compliance Plan. The scope of the RGD includes site suitability evaluation, licensing, environmental compliance, and safety and health compliance, in accordance with the direction provided by Section 4.6.3 of the PMS Manual. Site suitability evaluation and regulatory compliance during site characterization are significant activities, particularly with regard to the YW MSA. OCRWM's evaluation of whether the Yucca Mountain site is suitable for repository development must precede its submittal of a license application to the Nuclear Regulatory Commission (NRC). Accordingly, site suitability evaluation is discussed in Chapter 4, and the general statements of policy regarding site suitability evaluation are discussed in Section 2.1. Although much of the data and analyses may initially be similar, the licensing process is discussed separately in Chapter 5. Environmental compliance is discussed in Chapter 6. Safety and Health compliance is discussed in Chapter 7

  1. The Experience of a Highly Skilled Student during Handball Lessons in Physical Education: A Relevant Pointer to the Gap between School and Sports Contexts of Practice

    Science.gov (United States)

    Crance, Marie-Cecile; Trohel, Jean; Saury, Jacques

    2013-01-01

    Introduction: This study investigated the experience of a highly skilled student during a handball physical education unit in a French high school. More specifically, the analysis describes the nature of his involvement during two lessons that follow a pedagogical model close to the principles of Sport Education. The present case study of a…

  2. Work-Related Eye Injuries: A Relevant Health Problem. Main Epidemiological Data from a Highly-Industrialized Area of Northern Italy.

    Science.gov (United States)

    Gobba, Fabriziomaria; Dall'Olio, Enrico; Modenese, Alberto; De Maria, Michele; Campi, Luca; Cavallini, Gian Maria

    2017-06-06

    The province of Modena is one of the most industrialized areas of Northern Italy. The medical records of the Ophthalmological Emergency Department (OED) of Modena University Hospital were studied: there were 13,470 OED accesses in 2014 and in 754 cases that an occupational eye injury occurred. The frequency of work-related eye injuries (3‰) was lower compared to other published studies, but the absolute number is still relevant, showing the need for more adequate prevention, especially in metal work, construction work, and agriculture, where the worst prognoses were observed. Intervention programs must be implemented as early as possible in the working life, considering that the frequency in younger workers is about double that of the oldest age class (3.5‰ vs. 1.8‰), and special attention should also be given to foreigners, who have a 50% higher injury risk. Furthermore, the planning of specific interventions for eye-injured workers may be useful, considering that a previous injury does not appear to encourage the adoption of preventive interventions, and a subgroup of eye-injured workers have a potential risk for new injuries. Finally, the data presented here indicates how OED records, integrated with specific occupational information, can be applied for studies on work-related eye injuries.

  3. Work-Related Eye Injuries: A Relevant Health Problem. Main Epidemiological Data from a Highly-Industrialized Area of Northern Italy

    Directory of Open Access Journals (Sweden)

    Fabriziomaria Gobba

    2017-06-01

    Full Text Available The province of Modena is one of the most industrialized areas of Northern Italy. The medical records of the Ophthalmological Emergency Department (OED of Modena University Hospital were studied: there were 13,470 OED accesses in 2014 and in 754 cases that an occupational eye injury occurred. The frequency of work-related eye injuries (3‰ was lower compared to other published studies, but the absolute number is still relevant, showing the need for more adequate prevention, especially in metal work, construction work, and agriculture, where the worst prognoses were observed. Intervention programs must be implemented as early as possible in the working life, considering that the frequency in younger workers is about double that of the oldest age class (3.5‰ vs. 1.8‰, and special attention should also be given to foreigners, who have a 50% higher injury risk. Furthermore, the planning of specific interventions for eye-injured workers may be useful, considering that a previous injury does not appear to encourage the adoption of preventive interventions, and a subgroup of eye-injured workers have a potential risk for new injuries. Finally, the data presented here indicates how OED records, integrated with specific occupational information, can be applied for studies on work-related eye injuries.

  4. The Limits to Relevance

    Science.gov (United States)

    Averill, M.; Briggle, A.

    2006-12-01

    Science policy and knowledge production lately have taken a pragmatic turn. Funding agencies increasingly are requiring scientists to explain the relevance of their work to society. This stems in part from mounting critiques of the "linear model" of knowledge production in which scientists operating according to their own interests or disciplinary standards are presumed to automatically produce knowledge that is of relevance outside of their narrow communities. Many contend that funded scientific research should be linked more directly to societal goals, which implies a shift in the kind of research that will be funded. While both authors support the concept of useful science, we question the exact meaning of "relevance" and the wisdom of allowing it to control research agendas. We hope to contribute to the conversation by thinking more critically about the meaning and limits of the term "relevance" and the trade-offs implicit in a narrow utilitarian approach. The paper will consider which interests tend to be privileged by an emphasis on relevance and address issues such as whose goals ought to be pursued and why, and who gets to decide. We will consider how relevance, narrowly construed, may actually limit the ultimate utility of scientific research. The paper also will reflect on the worthiness of research goals themselves and their relationship to a broader view of what it means to be human and to live in society. Just as there is more to being human than the pragmatic demands of daily life, there is more at issue with knowledge production than finding the most efficient ways to satisfy consumer preferences or fix near-term policy problems. We will conclude by calling for a balanced approach to funding research that addresses society's most pressing needs but also supports innovative research with less immediately apparent application.

  5. Gully monitoring at two locations in the Grand Canyon National Park, Arizona, 1996-2010, with emphasis on documenting effects of the March 2008 high-flow experiment

    Science.gov (United States)

    Schott, Nathan D.; Hazel, Joseph E.; Fairley, Helen C.; Kaplinski, Matt; Parnell, Roderic A.

    2014-01-01

    Many archeological sites in the Grand Canyon are being impacted by gully incision. In March 2008, a high-flow experiment (2008 HFE) was conducted with the intention of redistributing fine sediment (sand, silt, and clay) from the bed of the Colorado River to higher elevations along the channel margin. Deposition of fine sediment in gully mouths has been hypothesized to slow gully erosion rates and lessen impacts to archeological sites. The effects of the 2008 HFE on gullies were evaluated by comparing the topographic changes of three gullies at two study sites before and after the 2008 HFE. Comparison results indicated that sediment was deposited in gully mouths during the 2008 HFE, and that the inundated areas nearest to the river can be extensively altered by mainstream flow during high-flow events. Additionally, the history of gully evolution at the two study sites was examined between 1996 and 2010 and indicated that gullies have been subjected to thalweg incision and gully widening processes over a decadal timescale. Although the small sample size precludes extrapolating the results to other gullies, the findings contribute to the understanding of gully erosion in archeologically significant areas and have implications for future monitoring of gully erosion and evaluating the effectiveness of check dams intended to mitigate that erosion at archaeological sites in the Grand Canyon National Park.

  6. Investigations of natural groundwater hazards at the proposed Yucca Mountain high level nuclear waste repository. Part A: Geology at Yucca Mountain. Part B: Modeling of hydro-tectonic phenomena relevant to Yucca Mountain. Annual report - Nevada

    International Nuclear Information System (INIS)

    Szymanski, J.S.; Schluter, C.M.; Livingston, D.E.

    1993-05-01

    This document is an annual report describing investigations of natural groundwater hazards at the proposed Yucca Mountain, Nevada High-Level Nuclear Waste Repository.This document describes research studies of the origin of near surface calcite/silica deposits at Yucca Mountain. The origin of these deposits is controversial and the authors have extended and strengthened the basis of their arguments for epigenetic, metasomatic alteration of the tuffs at Yucca Mountain. This report includes stratigraphic, mineralogical, and geochronological information along with geochemical data to support the conclusions described by Livingston and Szymanski, and others. As part of their first annual report, they take this opportunity to clarify the technical basis of their concerns and summarize the critical geological field evidence and related information. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database

  7. Changes in CR-39 proton sensitivity due to prolonged exposure to high vacuums relevant to the National Ignition Facility and OMEGA.

    Science.gov (United States)

    Manuel, M J-E; Rosenberg, M J; Sinenian, N; Rinderknecht, H; Zylstra, A B; Séguin, F H; Frenje, J; Li, C K; Petrasso, R D

    2011-09-01

    When used at facilities like OMEGA and the NIF, CR-39 is exposed to high vacuum environments before and after irradiation by charged particles and neutrons. Using an electrostatic linear accelerator at MIT, studies have been conducted to investigate the effects of high vacuum exposure on the sensitivity of CR-39 to fusion protons in the ~1-9 MeV energy range. High vacuum conditions, of order 10(-5) Torr, experienced by CR-39 samples at these facilities were emulated. It is shown that vacuum exposure times longer than ~16 h before proton irradiation result in a decrease in proton sensitivity, whereas no effect was observed for up to 67 h of vacuum exposure after proton irradiation. CR-39 sensitivity curves are presented for samples with prolonged exposure to high vacuum before and after proton irradiation. © 2011 American Institute of Physics

  8. Documents and legal texts

    International Nuclear Information System (INIS)

    2013-01-01

    This section reprints a selection of recently published legislative texts and documents: - Russian Federation: Federal Law No.170 of 21 November 1995 on the use of atomic energy, Adopted by the State Duma on 20 October 1995; - Uruguay: Law No.19.056 On the Radiological Protection and Safety of Persons, Property and the Environment (4 January 2013); - Japan: Third Supplement to Interim Guidelines on Determination of the Scope of Nuclear Damage resulting from the Accident at the Tokyo Electric Power Company Fukushima Daiichi and Daini Nuclear Power Plants (concerning Damages related to Rumour-Related Damage in the Agriculture, Forestry, Fishery and Food Industries), 30 January 2013; - France and the United States: Joint Statement on Liability for Nuclear Damage (Aug 2013); - Franco-Russian Nuclear Power Declaration (1 November 2013)

  9. Wind system documentation

    Energy Technology Data Exchange (ETDEWEB)

    Froggatt, J.R.; Tatum, C.P.

    1993-01-15

    Atmospheric transport and diffusion models have been developed by the Environmental Technology Section (ETS) of the Savannah River Technology Center to calculate the location and concentration of toxic or radioactive materials during an accidental release at the Savannah River Site (SRS). The output from these models has been used to support initial on-site and off-site emergency response activities such as protective action decision making and field monitoring coordination. These atmospheric transport and diffusion models have been incorporated into an automated computer-based system called the (Weather Information and Display) System and linked to real-time meteorological and radiological monitoring instruments to provide timely information for these emergency response activities (Hunter, 1990). This report documents various aspects of the WIND system.

  10. ICRS Recommendation Document

    DEFF Research Database (Denmark)

    Roos, Ewa M.; Engelhart, Luella; Ranstam, Jonas

    2011-01-01

    and function evaluated for validity and psychometric properties in patients with articular cartilage lesions. Results: The knee-specific instruments, titled the International Knee Documentation Committee Subjective Knee Form and the Knee injury and Osteoarthritis and Outcome Score, both fulfill the basic......Abstract Objective: The purpose of this article is to describe and recommend patient-reported outcome instruments for use in patients with articular cartilage lesions undergoing cartilage repair interventions. Methods: Nonsystematic literature search identifying measures addressing pain...... constructs at all levels according to the International Classification of Functioning. Conclusions: Because there is no obvious superiority of either instrument at this time, both outcome measures are recommended for use in cartilage repair. Rescaling of the Lysholm Scoring Scale has been suggested...

  11. Regulatory systems-based licensing guidance documentation

    International Nuclear Information System (INIS)

    Delligatti, M.S.

    1991-01-01

    The US Nuclear Regulatory Commission (NRC) has developed a series of licensing guidance documents based on the regulatory requirements in Part 60 of Title 10 of the Code of Federal Regulations (10 CFR Part 60). This regulatory systems-based approach to licensing guidance documentation relies on the definition of the high-level waste repository in 10 CFR Part 60. A document which is important for the frame-work it gives to other programmatic licensing guidance is the Draft Regulatory Guide open-quotes Format and Content for the License Application for the High-Level Waste Repositoryclose quotes (FCRG). The FCRG describes a format and content acceptable to NRC for a high-level waste repository license application pursuant to the requirements of 10 CFR Part 60. Other licensing guidance documents will be compatible with the FCRG

  12. Mined Geologic Disposal System Requirements Document

    International Nuclear Information System (INIS)

    1993-01-01

    This Mined Geologic Disposal System Requirements document (MGDS-RD) describes the functions to be performed by, and the requirements for, a Mined Geologic Disposal System (MGDS) for the permanent disposal of spent nuclear fuel (SNF) and commercial and defense high level radioactive waste (HLW) in support of the Civilian Radioactive Waste Management System (CRWMS). The development and control of the MGDS-RD is quality-affecting work and is subject to the Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM) Quality Assurance Requirements Document (QARD). As part of the technical requirements baseline, it is also subject to Baseline Management Plan controls. The MGDS-RD and the other program-level requirements documents have been prepared and managed in accordance with the Technical Document Preparation Plan (TDPP) for the Preparation of System Requirements Documents

  13. Is Information Still Relevant?

    Science.gov (United States)

    Ma, Lia

    2013-01-01

    Introduction: The term "information" in information science does not share the characteristics of those of a nomenclature: it does not bear a generally accepted definition and it does not serve as the bases and assumptions for research studies. As the data deluge has arrived, is the concept of information still relevant for information…

  14. Areva, reference document 2006

    International Nuclear Information System (INIS)

    2006-01-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains information on the markets, market shares and competitive position of the AREVA group. Content: - 1 Person responsible for the reference document and persons responsible for auditing the financial statements; - 2 Information pertaining to the transaction (Not applicable); - 3 General information on the company and its share capital: Information on AREVA, on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; - 4 Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts, The principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and development programs, intellectual property and trademarks, Risk and insurance; - 5 Assets - Financial position - Financial performance: Analysis of and comments on the group's financial position and performance, 2006 Human Resources Report, Environmental Report, Consolidated financial statements, Notes to the consolidated financial statements, AREVA SA financial statements, Notes to the corporate financial statements; 6 - Corporate Governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Combined General Meeting of Shareholders of May 3, 2007; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2006, Outlook; 8 - Glossary; 9 - Table of concordance

  15. Areva reference document 2007

    International Nuclear Information System (INIS)

    2008-01-01

    This reference document contains information on the AREVA group's objectives, prospects and development strategies, particularly in Chapters 4 and 7. It contains also information on the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the reference document and persons responsible for auditing the financial statements; 2 - Information pertaining to the transaction (not applicable); 3 - General information on the company and its share capital: Information on Areva, Information on share capital and voting rights, Investment certificate trading, Dividends, Organization chart of AREVA group companies, Equity interests, Shareholders' agreements; 4 - Information on company operations, new developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, The energy businesses of the AREVA group, Front End division, Reactors and Services division, Back End division, Transmission and Distribution division, Major contracts 140 Principal sites of the AREVA group, AREVA's customers and suppliers, Sustainable Development and Continuous Improvement, Capital spending programs, Research and Development programs, Intellectual Property and Trademarks, Risk and insurance; 5 - Assets financial position financial performance: Analysis of and comments on the group's financial position and performance, Human Resources report, Environmental report, Consolidated financial statements 2007, Notes to the consolidated financial statements, Annual financial statements 2007, Notes to the corporate financial statements; 6 - Corporate governance: Composition and functioning of corporate bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual Ordinary General Meeting of Shareholders of April 17, 2008; 7 - Recent developments and future prospects: Events subsequent to year-end closing for 2007, Outlook; Glossary; table of concordance

  16. The Effect of Silicon on Photosynthesis and Expression of Its Relevant Genes in Rice (Oryza sativa L.) under High-Zinc Stress

    Science.gov (United States)

    Song, Alin; Li, Ping; Fan, Fenliang; Li, Zhaojun; Liang, Yongchao

    2014-01-01

    The main objectives of this study were to elucidate the roles of silicon (Si) in alleviating the effects of 2 mM zinc (high Zn) stress on photosynthesis and its related gene expression levels in leaves of rice (Oryza sativa L.) grown hydroponically with high-Zn stress. The results showed that photosynthetic parameters, including net photosynthetic rate, transpiration rate, stomatal conductance, intercellular CO2 concentration, chlorophyll concentration and the chlorophyll fluorescence, were decreased in rice exposed to high-Zn treatment. The leaf chloroplast structure was disordered under high-Zn stress, including uneven swelling, disintegrated and missing thylakoid membranes, and decreased starch granule size and number, which, however, were all counteracted by the addition of 1.5 mM Si. Furthermore, the expression levels of Os08g02630 (PsbY), Os05g48630 (PsaH), Os07g37030 (PetC), Os03g57120 (PetH), Os09g26810 and Os04g38410 decreased in Si-deprived plants under high-Zn stress. Nevertheless, the addition of 1.5 mM Si increased the expression levels of these genes in plants under high-Zn stress at 72 h, and the expression levels were higher in Si-treated plants than in Si-deprived plants. Therefore, we conclude that Si alleviates the Zn-induced damage to photosynthesis in rice. The decline of photosynthesis in Zn-stressed rice was attributed to stomatal limitation, and Si activated and regulated some photosynthesis-related genes in response to high-Zn stress, consequently increasing photosynthesis. PMID:25426937

  17. Final Report for Project "A high-throughput pipeline for mapping inter-species interactions and metabolic synergy relevant to next-generation biofuel production"

    Energy Technology Data Exchange (ETDEWEB)

    Segre, Daniel [Boston Univ., MA (United States); Marx, Christopher J. [Univ. of Idaho, Moscow, ID (United States); Northen, Trent [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2018-01-03

    . Throughout the project, we have used mass spectrometry to characterize and measure the metabolic inputs and outputs of each of these consortium members, providing valuable information for model refinement, and enabling the establishment of metabolism-mediated interactions. In addition to lignocellulose degradation, we have started addressing the challenge of removing metabolites (e.g. formaldehyde) produced by the demethoxylation of lignin monomers, which can otherwise inhibit microbial growth due to their toxicity. On the computational side, we have implemented genome-scale models for all consortium members, based on KBase reconstructions and literature curation, and we studied small consortia and their properties. Overall, our project has identified a complex landscape of interactions types and metabolic processes relevant to community-level functions, illustrating the challenges and opportunities of microbial community engineering for the transformation of biomass into bioproducts.

  18. Investigation of drugs of abuse and relevant metabolites in Dutch sewage water by liquid chromatography coupled to high resolution mass spectrometry

    NARCIS (Netherlands)

    Bijlsma, L.; Emke, E.; Hernández, F.; de Voogt, P.

    2012-01-01

    An extensive study on the presence of illicit drugs and pharmaceuticals with potential for abuse in sewage waters was made for the first time in the Netherlands. A total number of 24 target drugs were investigated in influent and effluent wastewater using liquid chromatography coupled to a high

  19. PSP Program close out documentation

    Energy Technology Data Exchange (ETDEWEB)

    Andringa, K.; Hootman, H.E.; Ferrara, A.S.; Smith, P.K.; Congdon, J.W.; Randolph, H.W.; Young, R.H.; Driggers, F.E.; Topp, S.V.

    1985-12-31

    In December 1982 DOE-SR directed SRL to study the feasibility and impact of a program to lower the U-236 content of the Highly Enriched Uranium (HEU) stockpile used as fuel for the SRP reactors. In response to this request SRL assessed four technologies, Atomic Vapor Laser Isotope Separation (AVLIS), Molecular Laser Isotope Separation (MLIS), Gas Centrifuge, and the Plasma Separation Process (PSP) for this purpose with the assistance of the Engineering Department. In April 1983 cost/benefit analyses for these processes, high spot cost estimates for production facilities, and process uncertainties were submitted to DOE-SR with a recommendation to proceed with the conceptual design and supporting development programs for a facility based on the use of the PSP process. The current program status for the PSP development program at SRL and the design and documentation of a production facility at SRP, referred to as the Fuel Improvement Demonstration Facility (FIDF), is described in this report.

  20. PERMCAT experiments with tritium at high helium flow rates relevant for the tritium extraction systems using the CAPER facility at TLK

    Energy Technology Data Exchange (ETDEWEB)

    Bükki-Deme, András, E-mail: andras.buekki-deme@kit.edu; Demange, David; Le, Thanh-Long; Fanghänel, Eleonore; Simon, Karl-Heinz

    2016-11-01

    Highlights: • We examined PERMCAT reactor efficiency processing tritiated water at high Helium carrier flow rates. • We have found that – as expected from previous studies – that the swamping ratio (ratio between the impurity and purge side flow rates) has a key effect on the decontamination factors. • On the other hand, some rather unexpected effects tend to show that the limiting phenomena of such specific operation of PERMCAT reactors (at high impurity flow rates, thus short residence time) lies on the kinetics of the isotope exchange reactions. - Abstract: Experiments are still necessary to consolidate the processes retained for the Tritium Extraction Systems of the European ITER Test Blanket Modules (TBM). A PERMCAT reactor combines a catalyst promoting isotope exchange reactions and a Pd/Ag membrane allowing tritium recovery from complex gaseous mixtures containing tritium in different chemical forms. Originally developed for the Tokamak Exhaust Processing, the PERMCAT process is also candidate to detritiate the water arising from an adsorption column installed in the TBM ancillary systems. We discuss the results of an extensive experimental campaign using a PERMCAT reactor to process Q{sub 2}O containing impurity gas mixtures at high flow rates. Two different experimental configurations were studied, namely PERMCAT stand-alone, and PERMCAT in combination with a zeolite molecular sieve bed (MSB, previously loaded with Q{sub 2}O) under regeneration. On the one hand, many expected behaviors were observed, such as the key influence of the swamping ratio (ratio between the impurity and purge side flow rates) on the decontamination factors. On the other hand, some rather unexpected effects tend to show that the limiting phenomena of such specific operation of PERMCAT reactors (at high flow rates, thus short residence time) lies on the kinetics of the isotope exchange reactions.

  1. Clinical Relevance of Adipokines

    Directory of Open Access Journals (Sweden)

    Matthias Blüher

    2012-10-01

    Full Text Available The incidence of obesity has increased dramatically during recent decades. Obesity increases the risk for metabolic and cardiovascular diseases and may therefore contribute to premature death. With increasing fat mass, secretion of adipose tissue derived bioactive molecules (adipokines changes towards a pro-inflammatory, diabetogenic and atherogenic pattern. Adipokines are involved in the regulation of appetite and satiety, energy expenditure, activity, endothelial function, hemostasis, blood pressure, insulin sensitivity, energy metabolism in insulin sensitive tissues, adipogenesis, fat distribution and insulin secretion in pancreatic β-cells. Therefore, adipokines are clinically relevant as biomarkers for fat distribution, adipose tissue function, liver fat content, insulin sensitivity, chronic inflammation and have the potential for future pharmacological treatment strategies for obesity and its related diseases. This review focuses on the clinical relevance of selected adipokines as markers or predictors of obesity related diseases and as potential therapeutic tools or targets in metabolic and cardiovascular diseases.

  2. Monitoring minimal residual disease in children with high-risk relapses of acute lymphoblastic leukemia: prognostic relevance of early and late assessment.

    Science.gov (United States)

    Eckert, C; Hagedorn, N; Sramkova, L; Mann, G; Panzer-Grümayer, R; Peters, C; Bourquin, J-P; Klingebiel, T; Borkhardt, A; Cario, G; Alten, J; Escherich, G; Astrahantseff, K; Seeger, K; Henze, G; von Stackelberg, A

    2015-08-01

    The prognosis for children with high-risk relapsed acute lymphoblastic leukemia (ALL) is poor. Here, we assessed the prognostic importance of response during induction and consolidation treatment prior to hematopoietic stem cell transplantation (HSCT) aiming to evaluate the best time to assess minimal residual disease (MRD) for intervention strategies and in future trials in high-risk ALL relapse patients. Included patients (n=125) were treated uniformly according to the ALL-REZ BFM (Berlin-Frankfurt-Münster) 2002 relapse trial (median follow-up time=4.8 years). Patients with MRD ⩾10(-3) after induction treatment (76/119, 64%) or immediately preceding HSCT (19/71, 27%) had a significantly worse probability of disease-free survival 10 years after relapse treatment begin, with 26% (±6%) or 23% (±7%), respectively, compared with 58% (±8%) or 48% (±7%) for patients with MRD treatment reduced MRD to treatment can be used to quantify the activity of different induction treatment strategies in phase II trials. MRD persistence at ⩾10(-3) before HSCT reflects a disease highly resistant to conventional intensive chemotherapy and requiring prospective controlled investigation of new treatment strategies and drugs.

  3. Electronic document management at Sizewell B

    International Nuclear Information System (INIS)

    Rippon, Simon.

    1996-01-01

    Sizewell ''B'', Britain's first PWR, officially opened on March 25 1996, will now rely for its document management on a sophisticated computer-based system. One of the largest single engineering projects ever to be commissioned on one site in Britain, Sizewell ''B'' accommodates more than 300,000 documents, including over 200,000 drawings. The electronic document management system will provide a number of important benefits, including a more direct method of maintaining the station's Configuration Management and hence maintaining high safety standards; improved turnaround in plant modification proposals (PMP); significant time and cost savings in managing vital records; and increased productivity. (Author)

  4. Information Needs/Relevance

    OpenAIRE

    Wildemuth, Barbara M.

    2009-01-01

    A user's interaction with a DL is often initiated as the result of the user experiencing an information need of some kind. Aspects of that experience and how it might affect the user's interactions with the DL are discussed in this module. In addition, users continuously make decisions about and evaluations of the materials retrieved from a DL, relative to their information needs. Relevance judgments, and their relationship to the user's information needs, are discussed in this module. Draft

  5. Documents and legal texts

    International Nuclear Information System (INIS)

    2015-01-01

    This section treats of the following Documents and legal texts: 1 - Canada: Nuclear Liability and Compensation Act (An Act respecting civil liability and compensation for damage in case of a nuclear incident, repealing the Nuclear Liability Act and making consequential amendments to other acts); 2 - Japan: Act on Compensation for Nuclear Damage (The purpose of this act is to protect persons suffering from nuclear damage and to contribute to the sound development of the nuclear industry by establishing a basic system regarding compensation in case of nuclear damage caused by reactor operation etc.); Act on Indemnity Agreements for Compensation of Nuclear Damage; 3 - Slovak Republic: Act on Civil Liability for Nuclear Damage and on its Financial Coverage and on Changes and Amendments to Certain Laws (This Act regulates: a) The civil liability for nuclear damage incurred in the causation of a nuclear incident, b) The scope of powers of the Nuclear Regulatory Authority (hereinafter only as the 'Authority') in relation to the application of this Act, c) The competence of the National Bank of Slovakia in relation to the supervised financial market entities in the financial coverage of liability for nuclear damage; and d) The penalties for violation of this Act)

  6. Documents and legal texts

    International Nuclear Information System (INIS)

    2014-01-01

    This section of the Bulletin presents the recently published documents and legal texts sorted by country: - Brazil: Resolution No. 169 of 30 April 2014. - Japan: Act Concerning Exceptions to Interruption of Prescription Pertaining to Use of Settlement Mediation Procedures by the Dispute Reconciliation Committee for Nuclear Damage Compensation in relation to Nuclear Damage Compensation Disputes Pertaining to the Great East Japan Earthquake (Act No. 32 of 5 June 2013); Act Concerning Measures to Achieve Prompt and Assured Compensation for Nuclear Damage Arising from the Nuclear Plant Accident following the Great East Japan Earthquake and Exceptions to the Extinctive Prescription, etc. of the Right to Claim Compensation for Nuclear Damage (Act No. 97 of 11 December 2013); Fourth Supplement to Interim Guidelines on Determination of the Scope of Nuclear Damage Resulting from the Accident at the Tokyo Electric Power Company Fukushima Daiichi and Daini Nuclear Power Plants (Concerning Damages Associated with the Prolongation of Evacuation Orders, etc.); Outline of 'Fourth Supplement to Interim Guidelines (Concerning Damages Associated with the Prolongation of Evacuation Orders, etc.)'. - OECD Nuclear Energy Agency: Decision and Recommendation of the Steering Committee Concerning the Application of the Paris Convention to Nuclear Installations in the Process of Being Decommissioned; Joint Declaration on the Security of Supply of Medical Radioisotopes. - United Arab Emirates: Federal Decree No. (51) of 2014 Ratifying the Convention on Supplementary Compensation for Nuclear Damage; Ratification of the Federal Supreme Council of Federal Decree No. (51) of 2014 Ratifying the Convention on Supplementary Compensation for Nuclear Damage

  7. Sharing and Adaptation of Educational Documents in E-Learning

    Directory of Open Access Journals (Sweden)

    Chekry Abderrahman

    2012-03-01

    Full Text Available Few documents can be reused among the huge number of the educational documents on the web. The exponential increase of these documents makes it almost impossible to search for relevant documents. In addition to this, e-learning is designed for public users who have different levels of knowledge and varied skills so they should be given a content that sees to their needs. This work is about adapting the content of learning with learners preferences, and give the teachers the ability to reuse a given content.

  8. High-speed data search

    Science.gov (United States)

    Driscoll, James N.

    1994-01-01

    The high-speed data search system developed for KSC incorporates existing and emerging information retrieval technology to help a user intelligently and rapidly locate information found in large textual databases. This technology includes: natural language input; statistical ranking of retrieved information; an artificial intelligence concept called semantics, where 'surface level' knowledge found in text is used to improve the ranking of retrieved information; and relevance feedback, where user judgements about viewed information are used to automatically modify the search for further information. Semantics and relevance feedback are features of the system which are not available commercially. The system further demonstrates focus on paragraphs of information to decide relevance; and it can be used (without modification) to intelligently search all kinds of document collections, such as collections of legal documents medical documents, news stories, patents, and so forth. The purpose of this paper is to demonstrate the usefulness of statistical ranking, our semantic improvement, and relevance feedback.

  9. Does pedagogical documentation support maternal reminiscing conversations?

    Directory of Open Access Journals (Sweden)

    Bethany Fleck

    2015-12-01

    Full Text Available When parents talk with their children about lessons learned in school, they are participating in reminiscing of an unshared event. This study sought to understand if pedagogical documentation, from the Reggio Approach to early childhood education, would support and enhance the conversation. Mother–child dyads reminisced two separate times about preschool lessons, one time with documentation available to them and one time without. Transcripts were coded extracting variables indicative of high and low maternal reminiscing styles. Results indicate that mother and child conversation characteristics were more highly elaborative when documentation was present than when it was not. In addition, children added more information to the conversation supporting the notion that such conversations enhanced memory for lessons. Documentation could be used as a support tool for conversations and children’s memory about lessons learned in school.

  10. Document image analysis: A primer

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    (1) Typical documents in today's office are computer-generated, but even so, inevitably by different computers and ... different sizes, from a business card to a large engineering drawing. Document analysis ... Whether global or adaptive ...

  11. Document management in engineering construction

    International Nuclear Information System (INIS)

    Liao Bing

    2008-01-01

    Document management is one important part of systematic quality management, which is one of the key factors to ensure the construction quality. In the engineering construction, quality management and document management shall interwork all the time, to ensure the construction quality. Quality management ensures that the document is correctly generated and adopted, and thus the completeness, accuracy and systematicness of the document satisfy the filing requirements. Document management ensures that the document is correctly transferred during the construction, and various testimonies such as files and records are kept for the engineering construction and its quality management. This paper addresses the document management in the engineering construction based on the interwork of the quality management and document management. (author)

  12. Sampling in the Snow: High School Winter Field Experiences Provide Relevant, Real World Connections Between Scientific Practices and Disciplinary Core Ideas

    Science.gov (United States)

    Hanson, E. W.; Burakowski, E. A.

    2014-12-01

    For much of the northern United States, the months surrounding the winter solstice are times of increased darkness, low temperatures, and frozen landscapes. It's a time when many high school science educators, who otherwise would venture outside with their classes, hunker down and are wary of the outdoors. However, a plethora of learning opportunities lies just beyond the classroom. Working collaboratively, a high school science teacher and a snow scientist have developed multiple activities to engage students in the scientific process of collecting, analyzing and interpreting the winter world using snow data to (1) learn about the insulative properties of snow, and (2) to learn about the role of snow cover on winter climate through its reflective properties while participating in a volunteer network that collects snow depth, albedo (reflectivity), and density data. These outdoor field-based snow investigations incorporate Next Generation Science Standards (NGSS) and disciplinary core ideas, including ESS2.C: The roles of water in Earth's surface processes and ESS2.D: Weather and Climate. Additionally, the lesson plans presented address Common Core State Standards (CCSS) in Mathematics, including the creation and analysis of bar graphs and time series plots (CCSS.Math.HSS-ID.A.1) and xy scatter plots (CCSS.Math.HSS-ID.B.6). High school students participating in the 2013/2014 snow sampling season described their outdoor learning experience as "authentic" and "hands-on" as compared to traditional class indoors. They emphasized that learning outdoors was essential to their understanding of underlying content and concepts because they "learn through actual experience."

  13. Relevance of LiPF6 as Etching Agent of LiMnPO4 Colloidal Nanocrystals for High Rate Performing Li-ion Battery Cathodes.

    Science.gov (United States)

    Chen, Lin; Dilena, Enrico; Paolella, Andrea; Bertoni, Giovanni; Ansaldo, Alberto; Colombo, Massimo; Marras, Sergio; Scrosati, Bruno; Manna, Liberato; Monaco, Simone

    2016-02-17

    LiMnPO4 is an attractive cathode material for the next-generation high power Li-ion batteries, due to its high theoretical specific capacity (170 mA h g(-1)) and working voltage (4.1 V vs Li(+)/Li). However, two main drawbacks prevent the practical use of LiMnPO4: its low electronic conductivity and the limited lithium diffusion rate, which are responsible for the poor rate capability of the cathode. The electronic resistance is usually lowered by coating the particles with carbon, while the use of nanosize particles can alleviate the issues associated with poor ionic conductivity. It is therefore of primary importance to develop a synthetic route to LiMnPO4 nanocrystals (NCs) with controlled size and coated with a highly conductive carbon layer. We report here an effective surface etching process (using LiPF6) on colloidally synthesized LiMnPO4 NCs that makes the NCs dispersible in the aqueous glucose solution used as carbon source for the carbon coating step. Also, it is likely that the improved exposure of the NC surface to glucose facilitates the formation of a conductive carbon layer that is in intimate contact with the inorganic core, resulting in a high electronic conductivity of the electrode, as observed by us. The carbon coated etched LiMnPO4-based electrode exhibited a specific capacity of 118 mA h g(-1) at 1C, with a stable cycling performance and a capacity retention of 92% after 120 cycles at different C-rates. The delivered capacities were higher than those of electrodes based on not etched carbon coated NCs, which never exceeded 30 mA h g(-1). The rate capability here reported for the carbon coated etched LiMnPO4 nanocrystals represents an important result, taking into account that in the electrode formulation 80% wt is made of the active material and the adopted charge protocol is based on reasonable fast charge times.

  14. Chemistry and radiochemistry of As, Re and Rh isotopes relevant to radiopharmaceutical applications: high specific activity radionuclides for imaging and treatment.

    Science.gov (United States)

    Feng, Yutian; Phelps, Tim E; Carroll, Valerie; Gallazzi, Fabio; Sieckman, Gary; Hoffman, Timothy J; Barnes, Charles L; Ketring, Alan R; Hennkens, Heather M; Jurisson, Silvia S

    2017-10-31

    The chemistry and radiochemistry of high specific activity radioisotopes of arsenic, rhenium and rhodium are reviewed with emphasis on University of Missouri activities over the past several decades, and includes recent results. The nuclear facilities at the University of Missouri (10 MW research reactor and 16.5 MeV GE PETtrace cyclotron) allow research and development into novel theranostic radionuclides. The production, separation, enriched target recovery, radiochemistry, and chelation chemistry of 72,77 As, 186,188 Re and 105 Rh are discussed.

  15. Recommended HSE-7 documents hierarchy

    International Nuclear Information System (INIS)

    Klein, R.B.; Jennrich, E.A.; Lund, D.M.; Danna, J.G.; Davis, K.D.; Rutz, A.C.

    1990-01-01

    This report recommends a hierarchy of waste management documents at Los Alamos National Laboratory (LANL or ''Laboratory''). The hierarchy addresses documents that are required to plan, implement, and document waste management programs at Los Alamos. These documents will enable the waste management group and the six sections contained within that group to satisfy requirements that are imposed upon them by the US Department of Energy (DOE), DOE Albuquerque Operations, US Environmental Protection Agency, various State of New Mexico agencies, and Laboratory management

  16. Structures of Highly Twisted Amides Relevant to Amide N-C Cross-Coupling: Evidence for Ground-State Amide Destabilization.

    Science.gov (United States)

    Pace, Vittorio; Holzer, Wolfgang; Meng, Guangrong; Shi, Shicheng; Lalancette, Roger; Szostak, Roman; Szostak, Michal

    2016-10-04

    Herein, we show that acyclic amides that have recently enabled a series of elusive transition-metal-catalyzed N-C activation/cross-coupling reactions are highly twisted around the N-C(O) axis by a new destabilization mechanism of the amide bond. A unique effect of the N-glutarimide substituent, leading to uniformly high twist (ca. 90°) irrespective of the steric effect at the carbon side of the amide bond has been found. This represents the first example of a twisted amide that does not bear significant steric hindrance at the α-carbon atom. The (15) N NMR data show linear correlations between electron density at nitrogen and amide bond twist. This study strongly supports the concept of amide bond ground-state twist as a blueprint for activation of amides toward N-C bond cleavage. The new mechanism offers considerable opportunities for organic synthesis and biological processes involving non-planar amide bonds. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Anomalous origin of the coronary artery from the wrong coronary sinus evaluated with computed tomography: ''High-risk'' anatomy and its clinical relevance

    International Nuclear Information System (INIS)

    Krupinski, Maciej; Urbanczyk-Zawadzka, Malgorzata; Laskowicz, Bartosz; Irzyk, Malgorzata; Banys, Robert; Klimeczek, Piotr; Gruszczynska, Katarzyna; Baron, Jan

    2014-01-01

    The aim of the study was to assess coronary arteries arising from the wrong coronary sinus, including CT-evaluated high-risk anatomic features, clinical symptoms and cardiac events during follow-up. A total of 7,115 patients scheduled for 64-slice or dual-source cardiac CT were screened for the presence of isolated anomalous origin of the coronary artery from the wrong coronary sinus. Anomalous origin of the coronary artery was found in 54 (0.76 %) patients (29 men, 25 women, mean age 60.9 ± 11.6 years). Sixteen (30 %) patients with abnormal right coronary origin (ARCA) more commonly had a slit-like orifice (15 vs. 3; p < 0.001), intramural course (15 vs. 3; p < 0.001) and interarterial course (11 vs. 0; p < 0.001) than 22 (41 %) and 13 (24 %) individuals with abnormal circumflex artery (ALCx) and left coronary artery (ALCA) origin, respectively. Patients with ALCA presented less frequently with chest pain than subjects with ARCA and ALCx (25 vs. 3; p = 0.03). Patients with ARCA tended to show higher occurrence of cardiac events in the follow-up than individuals with ALCA and ALCx (5 vs. 4; p = NS). High-risk anatomy features are most common in patients with ARCA and these patients also have higher prevalence of chest pain and cardiac events in the follow-up than individuals with ALCA and ALCx. (orig.)

  18. Optimization of high grade glioma cell culture from surgical specimens for use in clinically relevant animal models and 3D immunochemistry.

    Science.gov (United States)

    Hasselbach, Laura A; Irtenkauf, Susan M; Lemke, Nancy W; Nelson, Kevin K; Berezovsky, Artem D; Carlton, Enoch T; Transou, Andrea D; Mikkelsen, Tom; deCarvalho, Ana C

    2014-01-07

    Glioblastomas, the most common and aggressive form of astrocytoma, are refractory to therapy, and molecularly heterogeneous. The ability to establish cell cultures that preserve the genomic profile of the parental tumors, for use in patient specific in vitro and in vivo models, has the potential to revolutionize the preclinical development of new treatments for glioblastoma tailored to the molecular characteristics of each tumor. Starting with fresh high grade astrocytoma tumors dissociated into single cells, we use the neurosphere assay as an enrichment method for cells presenting cancer stem cell phenotype, including expression of neural stem cell markers, long term self-renewal in vitro, and the ability to form orthotopic xenograft tumors. This method has been previously proposed, and is now in use by several investigators. Based on our experience of dissociating and culturing 125 glioblastoma specimens, we arrived at the detailed protocol we present here, suitable for routine neurosphere culturing of high grade astrocytomas and large scale expansion of tumorigenic cells for preclinical studies. We report on the efficiency of successful long term cultures using this protocol and suggest affordable alternatives for culturing dissociated glioblastoma cells that fail to grow as neurospheres. We also describe in detail a protocol for preserving the neurospheres 3D architecture for immunohistochemistry. Cell cultures enriched in CSCs, capable of generating orthotopic xenograft models that preserve the molecular signatures and heterogeneity of GBMs, are becoming increasingly popular for the study of the biology of GBMs and for the improved design of preclinical testing of potential therapies.

  19. Evolutionary relevance facilitates visual information processing.

    Science.gov (United States)

    Jackson, Russell E; Calvillo, Dusti P

    2013-11-03

    Visual search of the environment is a fundamental human behavior that perceptual load affects powerfully. Previously investigated means for overcoming the inhibitions of high perceptual load, however, generalize poorly to real-world human behavior. We hypothesized that humans would process evolutionarily relevant stimuli more efficiently than evolutionarily novel stimuli, and evolutionary relevance would mitigate the repercussions of high perceptual load during visual search. Animacy is a significant component to evolutionary relevance of visual stimuli because perceiving animate entities is time-sensitive in ways that pose significant evolutionary consequences. Participants completing a visual search task located evolutionarily relevant and animate objects fastest and with the least impact of high perceptual load. Evolutionarily novel and inanimate objects were located slowest and with the highest impact of perceptual load. Evolutionary relevance may importantly affect everyday visual information processing.

  20. Evolutionary Relevance Facilitates Visual Information Processing

    Directory of Open Access Journals (Sweden)

    Russell E. Jackson

    2013-07-01

    Full Text Available Visual search of the environment is a fundamental human behavior that perceptual load affects powerfully. Previously investigated means for overcoming the inhibitions of high perceptual load, however, generalize poorly to real-world human behavior. We hypothesized that humans would process evolutionarily relevant stimuli more efficiently than evolutionarily novel stimuli, and evolutionary relevance would mitigate the repercussions of high perceptual load during visual search. Animacy is a significant component to evolutionary relevance of visual stimuli because perceiving animate entities is time-sensitive in ways that pose significant evolutionary consequences. Participants completing a visual search task located evolutionarily relevant and animate objects fastest and with the least impact of high perceptual load. Evolutionarily novel and inanimate objects were located slowest and with the highest impact of perceptual load. Evolutionary relevance may importantly affect everyday visual information processing.

  1. INTRODUCTION Previous reports have documented a high ...

    African Journals Online (AJOL)

    Conclusion: The positive effect of education on oral hygiene practices is highlighted in this study. However there is still need for proper health enlightenment in this population with regards to use of the available oral health care facilities. Keywords: Oral hygiene, Pregnancy, Nigeria. Annals of Ibadan Postgraduate Medicine.

  2. Tissue responses to low protracted doses of high LET radiations or photons: Early and late damage relevant to radio-protective countermeasures

    Science.gov (United States)

    Ainsworth, E. J.; Afzal, S. M. J.; Crouse, D. A.; Hanson, W. R.; Fry, R. J. M.

    Early and late murine tissue responses to single or fractionated low doses of heavy charged particles, fission-spectrum neutrons or gamma rays are considered. Damage to the hematopoietic system is emphasized, but results on acute lethality, host response to challenge with transplanted leukemia cells and life-shortening are presented. Low dose rates per fraction were used in some neutron experiments. Split-dose lethality studies (LD 50/30) with fission neutrons indicated greater accumulation of injury during a 9 fraction course (over 17 days) than was the case for γ-radiation. When total doses of 96 or 247 cGy of neutrons or γ rays were given as a single dose or in 9 fractions, a significant sparing effect on femur CFU-S depression was observed for both radiation qualities during the first 11 days, but there was not an earlier return to normal with dose fractionation. During the 9 fraction sequence, a significant sparing effect of low dose rate on CFU-S depression was observed in both neutron and γ-irradiated mice. CFU-S content at the end of the fractionation sequence did not correlate with measured LD 50/30. Sustained depression of femur and spleen CFU-S and a significant thrombocytopenia were observed when a total neutron dose of 240 cGy was given in 72 fractions over 24 weeks at low dose rates. The temporal aspects of CFU-S repopulation were different after a single versus fractionated neutron doses. The sustained reduction in the size of the CFU-S population was accompanied by an increase in the fraction in DNA synthesis. The proliferation characteristics and effects of age were different for radial CFU-S population closely associated with bone, compared with the axial population that can be readily aspirated from the femur. In aged irradiated animals, the CFU-S proliferation/redistribution response to typhoid vaccine showed both an age and radiation effect. After high single doses of neutrons or γ rays, a significant age- and radiation-related deficiency

  3. Statistical mechanics of light elements at high pressure. V Three-dimensional Thomas-Fermi-Dirac theory. [relevant to Jovian planetary interiors

    Science.gov (United States)

    Macfarlane, J. J.; Hubbard, W. B.

    1983-01-01

    A numerical technique for solving the Thomas-Fermi-Dirac (TED) equation in three dimensions, for an array of ions obeying periodic boundary conditions, is presented. The technique is then used to calculate deviations from ideal mixing for an alloy of hydrogen and helium at zero temperature and high presures. Results are compared with alternative models which apply perturbation theory to calculation of the electron distribution, based upon the assumption of weak response of the electron gas to the ions. The TFD theory, which permits strong electron response, always predicts smaller deviations from ideal mixing than would be predicted by perturbation theory. The results indicate that predicted phase separation curves for hydrogen-helium alloys under conditions prevailing in the metallic zones of Jupiter and Saturn are very model dependent.

  4. LAD Early Career Prize Talk:Laboratory astrophysics experiments investigating the effects of high energy fluxes on Rayleigh-Taylor instability growth relevant to young supernova remnants

    Science.gov (United States)

    Kuranz, Carolyn C.; Drake, R. Paul; Park, Hye Sook; Huntington, Channing; Miles, Aaron R.; Remington, Bruce A.; Plewa, Tomek; Trantham, Matt; Shvarts, Dov; Raman, Kumar; MacLaren, Steven; Wan, Wesley; Doss, Forrest; Kline, John; Flippos, Kirk; Malamud, Guy; Handy, Timothy; Prisbey, Shon; Grosskopf, Michael; Krauland, Christine; Klein, Sallee; Harding, Eric; Wallace, Russell; Marion, Donna; Kalantar, Dan

    2017-06-01

    Energy-transport effects can alter the structure that develops as a supernova evolves into a supernova remnant. The Rayleigh Taylor (RT) instability is thought to produce structure at the interface between the stellar ejecta and the circumstellar matter (CSM), based on simple models and hydrodynamic simulations. When a blast wave emerges from an exploding star, it drives a forward shock into the CSM and a reverse shock forms in the expanding stellar ejecta, creating a young supernova remnant (SNR). As mass accumulates in the shocked layers, the interface between these two shocks decelerates, becoming unstable to the RT instability. Simulations predict that RT produces structures at this interface, having a range of spatial scales. When the CSM is dense enough, as in the case of SN 1993J, the hot shocked matter can produce significant radiative fluxes that affect the emission from the SNR. Here we report experimental results from the National Ignition Facility (NIF) to explore how large energy fluxes, which are present in supernovae such as SN 1993J, might affect this structure. The experiment used NIF to create a RT unstable interface subject to a high energy flux by the emergence of a blast wave into lower-density matter, in analogy to the SNR. We also preformed and with a low energy flux to compare the affect of the energy flux on the instability growth. We found that the RT growth was reduced in the experiments with a high energy flux. In analyzing the comparison with SN 1993J, we discovered that the energy fluxes produced by heat conduction appear to be larger than the radiative energy fluxes, and large enough to have dramatic consequences. No reported astrophysical simulations have included radiation and heat conduction self-consistently in modeling SNRs.

  5. Indolyl aryl sulfones (IASs): development of highly potent NNRTIs active against wt-HIV-1 and clinically relevant drug resistant mutants.

    Science.gov (United States)

    Silvestri, Romano; Artico, Marino

    2005-01-01

    Indolyl aryl sulfones (IASs) are a potent class of NNRTIs developed from L-737,126, a lead agent discovered by Merck AG. IAS derivatives are endowed with inhibitory activities against wt HIV-1 in the low nanomolar concentration range. Introduction of two methyl groups at positions 3 and 5 of the phenyl ring of the aryl sulfonyl moiety furnished IAS derivatives such as 5-chloro- or 5-bromo-3-[(3,5-dimethylphenyl)sulfonyl]indole-2-carboxyamide, which showed very potent and selective anti-HIV-1 activity against some mutants carrying NNRTI resistant mutations at positions 103 and 181 of the reverse transcriptase. IAS derivatives bearing 2-hydroxyethylcarboxyamide or 2-hydroxyethylcarboxyhydrazide groups at position 2 of the indole nucleus were more active than L-737,126 against the K103N-Y181C double mutant. A great improvement of antiviral activity against wt HIV-1 and resistant mutants was obtained by coupling 1-3 simple amino acids, such as glycine and alanine, in sequence, with the 3-[(3,5-dimethylphenyl)sulfonyl]-1H-indole-2-carbonyl moiety. The transformation of the chain terminus into amide or hydrazide, produced short peptides with high selectivity and potent activity against wt HIV-1, and the viral mutants Y181C, K103N-Y181C and EFV(R). IAS having two halogen atoms at the indole showed potent inhibitory activity against the Y181C and the EFV(R) resistant mutant strains. In particular, the introduction of a fluorine atom at position 4 of the indole ring notably contributed to improve the antiviral activities against both wt and the related resistant mutants. 5-Nitro-IASs were highly active against wt HIV-1 and exhibited low cytotoxicity. Experimental data highlighted the class IAS derivatives as promising candidates for clinical trials.

  6. High-resolution sub-Doppler infrared spectroscopy of atmospherically relevant Criegee precursor CH2I radicals: CH2 stretch vibrations and "charge-sloshing" dynamics

    Science.gov (United States)

    Kortyna, A.; Lesko, D. M. B.; Nesbitt, D. J.

    2018-05-01

    The combination of a pulsed supersonic slit-discharge source and single-mode difference frequency direct absorption infrared spectroscopy permit first high resolution infrared study of the iodomethyl (CH2I) radical, with the CH2I radical species generated in a slit jet Ne/He discharge and cooled to 16 K in the supersonic expansion. Dual laser beam detection and collisional collimation in the slit expansion yield sub-Doppler linewidths (60 MHz), an absolute frequency calibration of 13 MHz, and absorbance sensitivities within a factor of two of the shot-noise limit. Fully rovibrationally resolved direct absorption spectra of the CH2 symmetric stretch mode (ν2) are obtained and fitted to a Watson asymmetric top Hamiltonian with electron spin-rotation coupling, providing precision rotational constants and spin-rotation tensor elements for the vibrationally excited state. Analysis of the asymmetric top rotational constants confirms a vibrationally averaged planar geometry in both the ground- and first-excited vibrational levels. Sub-Doppler resolution permits additional nuclear spin hyperfine structures to be observed, with splittings in excellent agreement with microwave measurements on the ground state. Spectroscopic data on CH2I facilitate systematic comparison with previous studies of halogen-substituted methyl radicals, with the periodic trends strongly correlated with the electronegativity of the halogen atom. Interestingly, we do not observe any asymmetric CH2 stretch transitions, despite S/N ≈ 25:1 on strongest lines in the corresponding symmetric CH2 stretch manifold. This dramatic reversal of the more typical 3:1 antisymmetric/symmetric CH2 stretch intensity ratio signals a vibrational transition moment poorly described by simple "bond-dipole" models. Instead, the data suggest that this anomalous intensity ratio arises from "charge sloshing" dynamics in the highly polar carbon-iodine bond, as supported by ab initio electron differential density plots and

  7. Asymmetric Hollow Fiber Membranes for Separation of CO 2 from Hydrocarbons and Fluorocarbons at High-Pressure Conditions Relevant to C 2 F 4 Polymerization

    KAUST Repository

    Kosuri, Madhava R.

    2009-12-02

    Separation of high-pressure carbon dioxide from fluorocarbons is important for the production of fluoropolymers such as poly(tetrafluoroethylene). Typical polymeric membranes plasticize under high CO2 partial pressure conditions and fail to provide adequate selective separations. Torlon, a polyamide-imide polymer, with the ability to form interchain hydrogen bonding, is shown to provide stability against aggressive CO2 plasticization. Torlon membranes in the form of asymmetric hollow fibers (the most productive form of membranes) are considered for an intended separation of CO 2/C2F4. To avoid safety issues with tetrafluoroethylene (C2F4), which could detonate under testing conditions, safer surrogate mixtures (C2H2F 2 and C2H4) are considered in this paper. Permeation measurements (at 35 °C) indicate that the Torlon membranes are not plasticized even up to 1250 psi of CO2. The membranes provide mixed gas CO2/C2H2F2 and CO 2/C2H4 selectivities of 100 and 30, respectively, at 1250 psi partial pressures of CO2. On the basis of the measured separation performances of CO2/C2H 2F2 and CO2/C2H4 mixtures, the selectivity of the CO2/C2F4 mixture is expected to be greater than 100. Long-term stability studies indicate that the membranes provide stable separations over a period of 5 days at 1250 psi partial pressures of CO2, thereby making the membrane approach attractive. © 2009 American Chemical Society.

  8. Optimized mtDNA Control Region Primer Extension Capture Analysis for Forensically Relevant Samples and Highly Compromised mtDNA of Different Age and Origin

    Directory of Open Access Journals (Sweden)

    Mayra Eduardoff

    2017-09-01

    Full Text Available The analysis of mitochondrial DNA (mtDNA has proven useful in forensic genetics and ancient DNA (aDNA studies, where specimens are often highly compromised and DNA quality and quantity are low. In forensic genetics, the mtDNA control region (CR is commonly sequenced using established Sanger-type Sequencing (STS protocols involving fragment sizes down to approximately 150 base pairs (bp. Recent developments include Massively Parallel Sequencing (MPS of (multiplex PCR-generated libraries using the same amplicon sizes. Molecular genetic studies on archaeological remains that harbor more degraded aDNA have pioneered alternative approaches to target mtDNA, such as capture hybridization and primer extension capture (PEC methods followed by MPS. These assays target smaller mtDNA fragment sizes (down to 50 bp or less, and have proven to be substantially more successful in obtaining useful mtDNA sequences from these samples compared to electrophoretic methods. Here, we present the modification and optimization of a PEC method, earlier developed for sequencing the Neanderthal mitochondrial genome, with forensic applications in mind. Our approach was designed for a more sensitive enrichment of the mtDNA CR in a single tube assay and short laboratory turnaround times, thus complying with forensic practices. We characterized the method using sheared, high quantity mtDNA (six samples, and tested challenging forensic samples (n = 2 as well as compromised solid tissue samples (n = 15 up to 8 kyrs of age. The PEC MPS method produced reliable and plausible mtDNA haplotypes that were useful in the forensic context. It yielded plausible data in samples that did not provide results with STS and other MPS techniques. We addressed the issue of contamination by including four generations of negative controls, and discuss the results in the forensic context. We finally offer perspectives for future research to enable the validation and accreditation of the PEC MPS

  9. Asymmetric Hollow Fiber Membranes for Separation of CO 2 from Hydrocarbons and Fluorocarbons at High-Pressure Conditions Relevant to C 2 F 4 Polymerization

    KAUST Repository

    Kosuri, Madhava R.; Koros, William J.

    2009-01-01

    Separation of high-pressure carbon dioxide from fluorocarbons is important for the production of fluoropolymers such as poly(tetrafluoroethylene). Typical polymeric membranes plasticize under high CO2 partial pressure conditions and fail to provide adequate selective separations. Torlon, a polyamide-imide polymer, with the ability to form interchain hydrogen bonding, is shown to provide stability against aggressive CO2 plasticization. Torlon membranes in the form of asymmetric hollow fibers (the most productive form of membranes) are considered for an intended separation of CO 2/C2F4. To avoid safety issues with tetrafluoroethylene (C2F4), which could detonate under testing conditions, safer surrogate mixtures (C2H2F 2 and C2H4) are considered in this paper. Permeation measurements (at 35 °C) indicate that the Torlon membranes are not plasticized even up to 1250 psi of CO2. The membranes provide mixed gas CO2/C2H2F2 and CO 2/C2H4 selectivities of 100 and 30, respectively, at 1250 psi partial pressures of CO2. On the basis of the measured separation performances of CO2/C2H 2F2 and CO2/C2H4 mixtures, the selectivity of the CO2/C2F4 mixture is expected to be greater than 100. Long-term stability studies indicate that the membranes provide stable separations over a period of 5 days at 1250 psi partial pressures of CO2, thereby making the membrane approach attractive. © 2009 American Chemical Society.

  10. Passage relevance models for genomics search

    Directory of Open Access Journals (Sweden)

    Frieder Ophir

    2009-03-01

    Full Text Available Abstract We present a passage relevance model for integrating syntactic and semantic evidence of biomedical concepts and topics using a probabilistic graphical model. Component models of topics, concepts, terms, and document are represented as potential functions within a Markov Random Field. The probability of a passage being relevant to a biologist's information need is represented as the joint distribution across all potential functions. Relevance model feedback of top ranked passages is used to improve distributional estimates of query concepts and topics in context, and a dimensional indexing strategy is used for efficient aggregation of concept and term statistics. By integrating multiple sources of evidence including dependencies between topics, concepts, and terms, we seek to improve genomics literature passage retrieval precision. Using this model, we are able to demonstrate statistically significant improvements in retrieval precision using a large genomics literature corpus.

  11. Characterization of aromatic organosulfur model compounds relevant to fossil fuels by using atmospheric pressure chemical ionization with CS2 and high-resolution tandem mass spectrometry.

    Science.gov (United States)

    Tang, Weijuan; Sheng, Huaming; Jin, Chunfen; Riedeman, James S; Kenttämaa, Hilkka I

    2016-04-15

    The chemistry of desulfurization involved in processing crude oil is greatly dependent on the forms of sulfur in the oil. Sulfur exists in different chemical bonding environments in fossil fuels, including those in thiophenes and benzothiophenes, thiols, sulfides, and disulfides. In this study, the fragmentation behavior of the molecular ions of 17 aromatic organosulfur compounds with various functionalities was systematically investigated by using high-resolution tandem mass spectrometry. Multiple-stage tandem mass spectrometric experiments were carried out using a linear quadrupole ion trap (LQIT) equipped with an atmospheric pressure chemical ionization (APCI) source. (+)APCI/CS2 was used to generate stable dominant molecular ions for all the compounds studied except for three sulfides that also showed abundant fragment ions. The LQIT coupled with an orbitrap mass spectrometer was used for elemental composition analysis, which facilitated the identification of the neutral molecules lost during fragmentation. The characteristic fragment ions generated in MS(2) and MS(3) experiments provide clues for the chemical bonding environment of sulfur atoms in the examined compounds. Upon collision-induced dissociation (CID), the molecular ions can lose the sulfur atom in a variety of ways, including as S (32 Da), HS(•) (33 Da), H2 S (34 Da), CS (44 Da), (•) CHS (45 Da) and CH2 S (46 Da). These neutral fragments are not only indicative of the presence of sulfur, but also of the type of sulfur present in the compound. Generally, losses of HS(•) and H2 S were found to be associated with compounds containing saturated sulfur functionalities, while losses of S, CS and (•) CHS were more common for heteroaromatic sulfur compounds. High-resolution tandem mass spectrometry with APCI/CS2 ionization is a viable approach to determining the types of organosulfur compounds. It can potentially be applied to analysis of complex mixtures, which is beneficial to improving the

  12. Enabling multi-level relevance feedback on PubMed by integrating rank learning into DBMS.

    Science.gov (United States)

    Yu, Hwanjo; Kim, Taehoon; Oh, Jinoh; Ko, Ilhwan; Kim, Sungchul; Han, Wook-Shin

    2010-04-16

    Finding relevant articles from PubMed is challenging because it is hard to express the user's specific intention in the given query interface, and a keyword query typically retrieves a large number of results. Researchers have applied machine learning techniques to find relevant articles by ranking the articles according to the learned relevance function. However, the process of learning and ranking is usually done offline without integrated with the keyword queries, and the users have to provide a large amount of training documents to get a reasonable learning accuracy. This paper proposes a novel multi-level relevance feedback system for PubMed, called RefMed, which supports both ad-hoc keyword queries and a multi-level relevance feedback in real time on PubMed. RefMed supports a multi-level relevance feedback by using the RankSVM as the learning method, and thus it achieves higher accuracy with less feedback. RefMed "tightly" integrates the RankSVM into RDBMS to support both keyword queries and the multi-level relevance feedback in real time; the tight coupling of the RankSVM and DBMS substantially improves the processing time. An efficient parameter selection method for the RankSVM is also proposed, which tunes the RankSVM parameter without performing validation. Thereby, RefMed achieves a high learning accuracy in real time without performing a validation process. RefMed is accessible at http://dm.postech.ac.kr/refmed. RefMed is the first multi-level relevance feedback system for PubMed, which achieves a high accuracy with less feedback. It effectively learns an accurate relevance function from the user's feedback and efficiently processes the function to return relevant articles in real time.

  13. Document flow segmentation for business applications

    Science.gov (United States)

    Daher, Hani; Belaïd, Abdel

    2013-12-01

    The aim of this paper is to propose a document flow supervised segmentation approach applied to real world heterogeneous documents. Our algorithm treats the flow of documents as couples of consecutive pages and studies the relationship that exists between them. At first, sets of features are extracted from the pages where we propose an approach to model the couple of pages into a single feature vector representation. This representation will be provided to a binary classifier which classifies the relationship as either segmentation or continuity. In case of segmentation, we consider that we have a complete document and the analysis of the flow continues by starting a new document. In case of continuity, the couple of pages are assimilated to the same document and the analysis continues on the flow. If there is an uncertainty on whether the relationship between the couple of pages should be classified as a continuity or segmentation, a rejection is decided and the pages analyzed until this point are considered as a "fragment". The first classification already provides good results approaching 90% on certain documents, which is high at this level of the system.

  14. Improving collaborative documentation in CMS

    International Nuclear Information System (INIS)

    Lassila-Perini, Kati; Salmi, Leena

    2010-01-01

    Complete and up-to-date documentation is essential for efficient data analysis in a large and complex collaboration like CMS. Good documentation reduces the time spent in problem solving for users and software developers. The scientists in our research environment do not necessarily have the interests or skills of professional technical writers. This results in inconsistencies in the documentation. To improve the quality, we have started a multidisciplinary project involving CMS user support and expertise in technical communication from the University of Turku, Finland. In this paper, we present possible approaches to study the usability of the documentation, for instance, usability tests conducted recently for the CMS software and computing user documentation.

  15. Gaia DR2 documentation

    Science.gov (United States)

    van Leeuwen, F.; de Bruijne, J. H. J.; Arenou, F.; Bakker, J.; Blomme, R.; Busso, G.; Cacciari, C.; Castañeda, J.; Cellino, A.; Clotet, M.; Comoretto, G.; Eyer, L.; González-Núñez, J.; Guy, L.; Hambly, N.; Hobbs, D.; van Leeuwen, M.; Luri, X.; Manteiga, M.; Pourbaix, D.; Roegiers, T.; Salgado, J.; Sartoretti, P.; Tanga, P.; Ulla, A.; Utrilla Molina, E.; Abreu, A.; Altmann, M.; Andrae, R.; Antoja, T.; Audard, M.; Babusiaux, C.; Bailer-Jones, C. A. L.; Barache, C.; Bastian, U.; Beck, M.; Berthier, J.; Bianchi, L.; Biermann, M.; Bombrun, A.; Bossini, D.; Breddels, M.; Brown, A. G. A.; Busonero, D.; Butkevich, A.; Cantat-Gaudin, T.; Carrasco, J. M.; Cheek, N.; Clementini, G.; Creevey, O.; Crowley, C.; David, M.; Davidson, M.; De Angeli, F.; De Ridder, J.; Delbò, M.; Dell'Oro, A.; Diakité, S.; Distefano, E.; Drimmel, R.; Durán, J.; Evans, D. W.; Fabricius, C.; Fabrizio, M.; Fernández-Hernández, J.; Findeisen, K.; Fleitas, J.; Fouesneau, M.; Galluccio, L.; Gracia-Abril, G.; Guerra, R.; Gutiérrez-Sánchez, R.; Helmi, A.; Hernandez, J.; Holl, B.; Hutton, A.; Jean-Antoine-Piccolo, A.; Jevardat de Fombelle, G.; Joliet, E.; Jordi, C.; Juhász, Á.; Klioner, S.; Löffler, W.; Lammers, U.; Lanzafame, A.; Lebzelter, T.; Leclerc, N.; Lecoeur-Taïbi, I.; Lindegren, L.; Marinoni, S.; Marrese, P. M.; Mary, N.; Massari, D.; Messineo, R.; Michalik, D.; Mignard, F.; Molinaro, R.; Molnár, L.; Montegriffo, P.; Mora, A.; Mowlavi, N.; Muinonen, K.; Muraveva, T.; Nienartowicz, K.; Ordenovic, C.; Pancino, E.; Panem, C.; Pauwels, T.; Petit, J.; Plachy, E.; Portell, J.; Racero, E.; Regibo, S.; Reylé, C.; Rimoldini, L.; Ripepi, V.; Riva, A.; Robichon, N.; Robin, A.; Roelens, M.; Romero-Gómez, M.; Sarro, L.; Seabroke, G.; Segovia, J. C.; Siddiqui, H.; Smart, R.; Smith, K.; Sordo, R.; Soria, S.; Spoto, F.; Stephenson, C.; Turon, C.; Vallenari, A.; Veljanoski, J.; Voutsinas, S.

    2018-04-01

    The second Gaia data release, Gaia DR2, encompasses astrometry, photometry, radial velocities, astrophysical parameters (stellar effective temperature, extinction, reddening, radius, and luminosity), and variability information plus astrometry and photometry for a sample of pre-selected bodies in the solar system. The data collected during the first 22 months of the nominal, five-year mission have been processed by the Gaia Data Processing and Analysis Consortium (DPAC), resulting into this second data release. A summary of the release properties is provided in Gaia Collaboration et al. (2018b). The overall scientific validation of the data is described in Arenou et al. (2018). Background information on the mission and the spacecraft can be found in Gaia Collaboration et al. (2016), with a more detailed presentation of the Radial Velocity Spectrometer (RVS) in Cropper et al. (2018). In addition, Gaia DR2 is accompanied by various, dedicated papers that describe the processing and validation of the various data products. Four more Gaia Collaboration papers present a glimpse of the scientific richness of the data. In addition to this set of refereed publications, this documentation provides a detailed, complete overview of the processing and validation of the Gaia DR2 data. Gaia data, from both Gaia DR1 and Gaia DR2, can be retrieved from the Gaia archive, which is accessible from https://archives.esac.esa.int/gaia. The archive also provides various tutorials on data access and data queries plus an integrated data model (i.e., description of the various fields in the data tables). In addition, Luri et al. (2018) provide concrete advice on how to deal with Gaia astrometry, with recommendations on how best to estimate distances from parallaxes. The Gaia archive features an enhanced visualisation service which can be used for quick initial explorations of the entire Gaia DR2 data set. Pre-computed cross matches between Gaia DR2 and a selected set of large surveys are

  16. Analysis of the effects of five factors relevant to in vitro chondrogenesis of human mesenchymal stem cells using factorial design and high throughput mRNA-profiling.

    Science.gov (United States)

    Jakobsen, Rune B; Østrup, Esben; Zhang, Xiaolan; Mikkelsen, Tarjei S; Brinchmann, Jan E

    2014-01-01

    The in vitro process of chondrogenic differentiation of mesenchymal stem cells for tissue engineering has been shown to require three-dimensional culture along with the addition of differentiation factors to the culture medium. In general, this leads to a phenotype lacking some of the cardinal features of native articular chondrocytes and their extracellular matrix. The factors used vary, but regularly include members of the transforming growth factor β superfamily and dexamethasone, sometimes in conjunction with fibroblast growth factor 2 and insulin-like growth factor 1, however the use of soluble factors to induce chondrogenesis has largely been studied on a single factor basis. In the present study we combined a factorial quality-by-design experiment with high-throughput mRNA profiling of a customized chondrogenesis related gene set as a tool to study in vitro chondrogenesis of human bone marrow derived mesenchymal stem cells in alginate. 48 different conditions of transforming growth factor β 1, 2 and 3, bone morphogenetic protein 2, 4 and 6, dexamethasone, insulin-like growth factor 1, fibroblast growth factor 2 and cell seeding density were included in the experiment. The analysis revealed that the best of the tested differentiation cocktails included transforming growth factor β 1 and dexamethasone. Dexamethasone acted in synergy with transforming growth factor β 1 by increasing many chondrogenic markers while directly downregulating expression of the pro-osteogenic gene osteocalcin. However, all factors beneficial to the expression of desirable hyaline cartilage markers also induced undesirable molecules, indicating that perfect chondrogenic differentiation is not achievable with the current differentiation protocols.

  17. Analysis of the Effects of Five Factors Relevant to In Vitro Chondrogenesis of Human Mesenchymal Stem Cells Using Factorial Design and High Throughput mRNA-Profiling

    Science.gov (United States)

    Jakobsen, Rune B.; Østrup, Esben; Zhang, Xiaolan; Mikkelsen, Tarjei S.; Brinchmann, Jan E.

    2014-01-01

    The in vitro process of chondrogenic differentiation of mesenchymal stem cells for tissue engineering has been shown to require three-dimensional culture along with the addition of differentiation factors to the culture medium. In general, this leads to a phenotype lacking some of the cardinal features of native articular chondrocytes and their extracellular matrix. The factors used vary, but regularly include members of the transforming growth factor β superfamily and dexamethasone, sometimes in conjunction with fibroblast growth factor 2 and insulin-like growth factor 1, however the use of soluble factors to induce chondrogenesis has largely been studied on a single factor basis. In the present study we combined a factorial quality-by-design experiment with high-throughput mRNA profiling of a customized chondrogenesis related gene set as a tool to study in vitro chondrogenesis of human bone marrow derived mesenchymal stem cells in alginate. 48 different conditions of transforming growth factor β 1, 2 and 3, bone morphogenetic protein 2, 4 and 6, dexamethasone, insulin-like growth factor 1, fibroblast growth factor 2 and cell seeding density were included in the experiment. The analysis revealed that the best of the tested differentiation cocktails included transforming growth factor β 1 and dexamethasone. Dexamethasone acted in synergy with transforming growth factor β 1 by increasing many chondrogenic markers while directly downregulating expression of the pro-osteogenic gene osteocalcin. However, all factors beneficial to the expression of desirable hyaline cartilage markers also induced undesirable molecules, indicating that perfect chondrogenic differentiation is not achievable with the current differentiation protocols. PMID:24816923

  18. Analysis of the effects of five factors relevant to in vitro chondrogenesis of human mesenchymal stem cells using factorial design and high throughput mRNA-profiling.

    Directory of Open Access Journals (Sweden)

    Rune B Jakobsen

    Full Text Available The in vitro process of chondrogenic differentiation of mesenchymal stem cells for tissue engineering has been shown to require three-dimensional culture along with the addition of differentiation factors to the culture medium. In general, this leads to a phenotype lacking some of the cardinal features of native articular chondrocytes and their extracellular matrix. The factors used vary, but regularly include members of the transforming growth factor β superfamily and dexamethasone, sometimes in conjunction with fibroblast growth factor 2 and insulin-like growth factor 1, however the use of soluble factors to induce chondrogenesis has largely been studied on a single factor basis. In the present study we combined a factorial quality-by-design experiment with high-throughput mRNA profiling of a customized chondrogenesis related gene set as a tool to study in vitro chondrogenesis of human bone marrow derived mesenchymal stem cells in alginate. 48 different conditions of transforming growth factor β 1, 2 and 3, bone morphogenetic protein 2, 4 and 6, dexamethasone, insulin-like growth factor 1, fibroblast growth factor 2 and cell seeding density were included in the experiment. The analysis revealed that the best of the tested differentiation cocktails included transforming growth factor β 1 and dexamethasone. Dexamethasone acted in synergy with transforming growth factor β 1 by increasing many chondrogenic markers while directly downregulating expression of the pro-osteogenic gene osteocalcin. However, all factors beneficial to the expression of desirable hyaline cartilage markers also induced undesirable molecules, indicating that perfect chondrogenic differentiation is not achievable with the current differentiation protocols.

  19. [Relevant public health enteropathogens].

    Science.gov (United States)

    Riveros, Maribel; Ochoa, Theresa J

    2015-01-01

    Diarrhea remains the third leading cause of death in children under five years, despite recent advances in the management and prevention of this disease. It is caused by multiple pathogens, however, the prevalence of each varies by age group, geographical area and the scenario where cases (community vs hospital) are recorded. The most relevant pathogens in public health are those associated with the highest burden of disease, severity, complications and mortality. In our country, norovirus, Campylobacter and diarrheagenic E. coli are the most prevalent pathogens at the community level in children. In this paper we review the local epidemiology and potential areas of development in five selected pathogens: rotavirus, norovirus, Shiga toxin-producing E. coli (STEC), Shigella and Salmonella. Of these, rotavirus is the most important in the pediatric population and the main agent responsible for child mortality from diarrhea. The introduction of rotavirus vaccination in Peru will have a significant impact on disease burden and mortality from diarrhea. However, surveillance studies are needed to determine the impact of vaccination and changes in the epidemiology of diarrhea in Peru following the introduction of new vaccines, as well as antibiotic resistance surveillance of clinical relevant bacteria.

  20. Salton and Buckley’s Landmark Research in Experimental Text Information Retrieval. A Review of: Salton, G., & Buckley, C. (1990. Improving retrieval performance by relevance feedback. Journal of the American Society for Information Science, 41(4, 288–297.

    Directory of Open Access Journals (Sweden)

    Christine F. Marton

    2011-01-01

    feedback models, (Tables 4, 5, and 6, pp. 294-296. In other words, all 3 relevance feedback algorithms based on the vector space retrieval model outperformed the 3 relevance feedback algorithms based on the probabilistic retrieval model, with the best relevance feedback results obtained for the “Ide dec hi” model. This finding suggests that improvements in relevance from term reweighting are attributable primarily to reweighting relevant terms. However, the probabilistic method with adjusted derivation, specifically considering the extra weight assignments for query terms, was almost as effective as the vector space model relevance feedback algorithms.Paired comparisons between full query expansion (all terms from the initial search are utilized in the feedback query and partial query expansion by the most common terms from the relevant items, demonstrate that full expansion is better, however, the difference between expansion methods is small.Conclusions – Relevance feedback methods that reformulate the initial query by reweighting existing query terms and adding new terms (query expansion can greatly improve the relevance of search results after only one feedback iteration. The amount of improvement achieved was highly variable across the 6 test collections, from 50% to 150% in the 3-point precision. Other variables thought to influence relevance feedback performance were initial query length, characteristics of the collection, including the specificity of the terms in the collection, the size of the collection (number of documents, and average term frequency in documents. The authors recommend that the relevance feedback process be incorporated into operational text retrieval systems.

  1. Integrated system for automated financial document processing

    Science.gov (United States)

    Hassanein, Khaled S.; Wesolkowski, Slawo; Higgins, Ray; Crabtree, Ralph; Peng, Antai

    1997-02-01

    A system was developed that integrates intelligent document analysis with multiple character/numeral recognition engines in order to achieve high accuracy automated financial document processing. In this system, images are accepted in both their grayscale and binary formats. A document analysis module starts by extracting essential features from the document to help identify its type (e.g. personal check, business check, etc.). These features are also utilized to conduct a full analysis of the image to determine the location of interesting zones such as the courtesy amount and the legal amount. These fields are then made available to several recognition knowledge sources such as courtesy amount recognition engines and legal amount recognition engines through a blackboard architecture. This architecture allows all the available knowledge sources to contribute incrementally and opportunistically to the solution of the given recognition query. Performance results on a test set of machine printed business checks using the integrated system are also reported.

  2. Local public document room directory. Revision 7

    International Nuclear Information System (INIS)

    1998-04-01

    This directory (NUREG/BR-0088, Revision 7) lists local public document rooms (LPDRs) for commercial nuclear power plants with operating or possession-only licenses or under construction, plus the LPDRs for potential high-level radioactive waste repository sites, gaseous diffusion plants, certain fuel cycle facilities, certain low-level waste disposal facilities, and any temporary LPDRs established for the duration of licensing proceedings. In some instances, the LPDR libraries maintain document collections for more than one licensed facility. The library staff members listed are the persons most familiar with the LPDR collections. Reference librarians in the NRC Headquarters Public Document Room (PDR) are also available to assist the public in locating NRC documents

  3. Gaz de France. 2006 reference document

    International Nuclear Information System (INIS)

    2006-01-01

    This document was issued by Gaz de France, the French gas utility, at the occasion of the opening of the capital of the company. It is intended to shareholders and presents the relevant informations relative to the annual consolidated financial statements of the group according to IFRS and French standards for the year 2005 (selected financial information, business overview, liquidity and capital resources, profit forecasts or estimates, compensation and benefits, issuer assets etc..). It includes also some complementary information about the activities of the group, its estate property, plants and equipments, its R and D and patenting activities, its management and administration, its 2005 and 2006 contracts etc.. (J.S.)

  4. Other relevant biological papers

    International Nuclear Information System (INIS)

    Shimizu, M.

    1989-01-01

    A considerable number of CRESP-relevant papers concerning deep-sea biology and radioecology have been published. It is the purpose of this study to call attention to them. They fall into three general categories. The first is papers of general interest. They are mentioned only briefly, and include text references to the global bibliography at the end of the volume. The second are papers that are not only mentioned and referenced, but for various reasons are described in abstract form. The last is a list of papers compiled by H.S.J. Roe specifically for this volume. They are listed in bibliographic form, and are also included in the global bibliography at the end of the volume

  5. EDF Group - 2010 Reference Document

    International Nuclear Information System (INIS)

    2011-04-01

    Beside the accounts of EDF for 2008 and 2009, this voluminous document presents persons in charge, legal account auditors, and how risks are managed within the company. It gives an overview of EDF activities, of its organization, of its assets. It presents and discusses its financial situation and results, indicates the main contracts, and proposes other documents concerning the company. Many documents and reports are provided in appendix

  6. Optical security features for plastic card documents

    Science.gov (United States)

    Hossick Schott, Joachim

    1998-04-01

    Print-on-demand is currently a major trend in the production of paper based documents. This fully digital production philosophy will likely have ramifications also for the secure identification document market. Here, plastic cards increasingly replace traditionally paper based security sensitive documents such as drivers licenses and passports. The information content of plastic cards can be made highly secure by using chip cards. However, printed and other optical security features will continue to play an important role, both for machine readable and visual inspection. Therefore, on-demand high resolution print technologies, laser engraving, luminescent pigments and laminated features such as holograms, kinegrams or phase gratings will have to be considered for the production of secure identification documents. Very important are also basic optical, surface and material durability properties of the laminates as well as the strength and nature of the adhesion between the layers. This presentation will address some of the specific problems encountered when optical security features such as high resolution printing and laser engraving are to be integrated in the on-demand production of secure plastic card identification documents.

  7. Document understanding for a broad class of documents

    NARCIS (Netherlands)

    Aiello, Marco; Monz, Christof; Todoran, Leon; Worring, Marcel

    2002-01-01

    We present a document analysis system able to assign logical labels and extract the reading order in a broad set of documents. All information sources, from geometric features and spatial relations to the textual features and content are employed in the analysis. To deal effectively with these

  8. Nuclear power plants documentation system

    International Nuclear Information System (INIS)

    Schwartz, E.L.

    1991-01-01

    Since the amount of documents (type and quantity) necessary for the entire design of a NPP is very large, this implies that an overall and detailed identification, filling and retrieval system shall be implemented. This is even more applicable to the FINAL QUALITY DOCUMENTATION of the plant, as stipulated by IAEA Safety Codes and related guides. For such a purpose it was developed a DOCUMENTATION MANUAL, which describes in detail the before mentioned documentation system. Here we present the expected goals and results which we have to reach for Angra 2 and 3 Project. (author)

  9. Cat swarm optimization based evolutionary framework for multi document summarization

    Science.gov (United States)

    Rautray, Rasmita; Balabantaray, Rakesh Chandra

    2017-07-01

    Today, World Wide Web has brought us enormous quantity of on-line information. As a result, extracting relevant information from massive data has become a challenging issue. In recent past text summarization is recognized as one of the solution to extract useful information from vast amount documents. Based on number of documents considered for summarization, it is categorized as single document or multi document summarization. Rather than single document, multi document summarization is more challenging for the researchers to find accurate summary from multiple documents. Hence in this study, a novel Cat Swarm Optimization (CSO) based multi document summarizer is proposed to address the problem of multi document summarization. The proposed CSO based model is also compared with two other nature inspired based summarizer such as Harmony Search (HS) based summarizer and Particle Swarm Optimization (PSO) based summarizer. With respect to the benchmark Document Understanding Conference (DUC) datasets, the performance of all algorithms are compared in terms of different evaluation metrics such as ROUGE score, F score, sensitivity, positive predicate value, summary accuracy, inter sentence similarity and readability metric to validate non-redundancy, cohesiveness and readability of the summary respectively. The experimental analysis clearly reveals that the proposed approach outperforms the other summarizers included in the study.

  10. Designing Documents for People to Use

    Directory of Open Access Journals (Sweden)

    David Sless

    Full Text Available This article reports on the work of Communication Research Institute (CRI, an international research center specializing in communication and information design. With the support of government, regulators, industry bodies, and business—and with the participation of people and their advocates—CRI has worked on over 200 public document design projects since it began as a small unit in 1985. CRI investigates practical methods and achievable standards for designing digital and paper public documents, including forms; workplace procedural notices; bills, letters, and emails sent by organizations; labels and instructions that accompany products and services; and legal and financial documents and contracts. CRI has written model grammars for the document types it designs, and the cumulative data from CRI projects has led to a set of systematic methods for designing public-use documents to a high standard. Through research, design, publishing, and advocacy, CRI works to measurably improve the ordinary documents we all have to use. Keywords: Information design, Design methods, Design standards, Communication design, Design diagnostic testing, Design research

  11. Operating correspondent documentation in power plants. Influence of modern control engineering and planning means. Proceedings. Betriebsgerechte Dokumentation in Kraftwerken. Einfluss der modernen Leittechnik und der Planungsmittel. Vortraege

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    The proceedings contain 3 papers covering the aspect of documentation in power plants: Relevant documentation from the operator's view and the manufacturer's view, auxiliary means for documentation and its futural aspects.

  12. Documenting Penicillin Allergy: The Impact of Inconsistency

    Science.gov (United States)

    Shah, Nirav S.; Ridgway, Jessica P.; Pettit, Natasha; Fahrenbach, John; Robicsek, Ari

    2016-01-01

    Background Allergy documentation is frequently inconsistent and incomplete. The impact of this variability on subsequent treatment is not well described. Objective To determine how allergy documentation affects subsequent antibiotic choice. Design Retrospective, cohort study. Participants 232,616 adult patients seen by 199 primary care providers (PCPs) between January 1, 2009 and January 1, 2014 at an academic medical system. Main Measures Inter-physician variation in beta-lactam allergy documentation; antibiotic treatment following beta-lactam allergy documentation. Key Results 15.6% of patients had a reported beta-lactam allergy. Of those patients, 39.8% had a specific allergen identified and 22.7% had allergic reaction characteristics documented. Variation between PCPs was greater than would be expected by chance (all ppenicillins”) (24.0% to 58.2%) and documentation of the reaction characteristics (5.4% to 51.9%). After beta-lactam allergy documentation, patients were less likely to receive penicillins (Relative Risk [RR] 0.16 [95% Confidence Interval: 0.15–0.17]) and cephalosporins (RR 0.28 [95% CI 0.27–0.30]) and more likely to receive fluoroquinolones (RR 1.5 [95% CI 1.5–1.6]), clindamycin (RR 3.8 [95% CI 3.6–4.0]) and vancomycin (RR 5.0 [95% CI 4.3–5.8]). Among patients with beta-lactam allergy, rechallenge was more likely when a specific allergen was identified (RR 1.6 [95% CI 1.5–1.8]) and when reaction characteristics were documented (RR 2.0 [95% CI 1.8–2.2]). Conclusions Provider documentation of beta-lactam allergy is highly variable, and details of the allergy are infrequently documented. Classification of a patient as beta-lactam allergic and incomplete documentation regarding the details of the allergy lead to beta-lactam avoidance and use of other antimicrobial agents, behaviors that may adversely impact care quality and cost. PMID:26981866

  13. Ciência, Tecnologia e Sociedade: a relevância do enfoque CTS para o contexto do Ensino Médio Science, Technology and Society: the importance of the STS view to high school context

    Directory of Open Access Journals (Sweden)

    Nilcéia Aparecida Maciel Pinheiro

    2007-04-01

    Full Text Available Ressalta-se a importância do enfoque Ciência, Tecnologia e Sociedade (CTS perante os questionamentos críticos e reflexivos acerca do contexto científico-tecnológico e social e, em especial, sua relevância para o Ensino Médio. Os pressupostos do movimento CTS têm se ampliado em toda sociedade brasileira, principalmente na área educacional. Dentro da proposta da Lei de Diretrizes e Bases da Educação Nacional (LDB, configurada nos Parâmetros Curriculares Nacionais do Ensino Médio (PCNEMs, percebe-se a relevância de aproximar o aluno da interação com a ciência e a tecnologia em todas as dimensões da sociedade, oportunizando a ele uma concepção ampla e social do contexto científico-tecnológico.We aim to highlight the importance of the STS view as a driving force of critical and reflexive questions about scientific, technological and social contexts, and also, to emphasize its relevance to High School. The STS movement has spread throughout our society and, specially, has gained more and more followers in the educational area. Inside the Guidelines Law of the National Education (LDB proposal, designed in the National Curriculum Parameters for Secondary Education (PCNEMS, we noticed the importance of bringing the student closer to the interaction between science and technology in societal dimensions, considering their reciprocal relation, giving the students a wide and social conception of the scientific and technological context.

  14. Automatic document retrieval by the FAIRS

    International Nuclear Information System (INIS)

    Sasaki, Yoshio

    1983-01-01

    The algorithm proposed by C. Vernimb is constructed by means of two commands of ''CALL'' and ''INCLUDE'' for the FACOM Advanced Information Retrieval System (FAIRS). And its functions are demonstrated by the use of an experimental datafile containing 76,000 items in the International Nuclear Information System cumulated for a year in 1980. The experiment is conducted for a search topic ''possible migration of radionuclides leached from radioactive waste stored in underground'' for which the datafile contains many relevant documents. Four sets of relevant documents (hits) are prepared to input as original samples at the beginning of on-line search. The sets consist of three hits respectively and are different from each other in indexing pattern. By the experiment, the recall ratio of 80% is obtained with the precision ratio of more than 50%, but these is difference in both seach time spent and the number of operational steps among the sets. Following detailed analysis of the results, discussions are made on the subjects to require further studies. (author)

  15. Storing XML Documents in Databases

    NARCIS (Netherlands)

    A.R. Schmidt; S. Manegold (Stefan); M.L. Kersten (Martin); L.C. Rivero; J.H. Doorn; V.E. Ferraggine

    2005-01-01

    textabstractThe authors introduce concepts for loading large amounts of XML documents into databases where the documents are stored and maintained. The goal is to make XML databases as unobtrusive in multi-tier systems as possible and at the same time provide as many services defined by the XML

  16. Document Organization Using Kohonen's Algorithm.

    Science.gov (United States)

    Guerrero Bote, Vicente P.; Moya Anegon, Felix de; Herrero Solana, Victor

    2002-01-01

    Discussion of the classification of documents from bibliographic databases focuses on a method of vectorizing reference documents from LISA (Library and Information Science Abstracts) which permits their topological organization using Kohonen's algorithm. Analyzes possibilities of this type of neural network with respect to the development of…

  17. SRS ecology: Environmental information document

    International Nuclear Information System (INIS)

    Wike, L.D.; Shipley, R.W.; Bowers, J.A.

    1993-09-01

    The purpose of this Document is to provide a source of ecological information based on the exiting knowledge gained from research conducted at the Savannah River Site. This document provides a summary and synthesis of ecological research in the three main ecosystem types found at SRS and information on the threatened and endangered species residing there

  18. Magnetic fusion program summary document

    International Nuclear Information System (INIS)

    1979-04-01

    This document outlines the current and planned research, development, and commercialization (RD and C) activities of the Offic of Fusion Energy under the Assistant Secretary for Energy Technology, US Department of Energy (DOE). The purpose of this document is to explain the Office of Fusion Energy's activities to Congress and its committees and to interested members of the public

  19. Documenting the Engineering Design Process

    Science.gov (United States)

    Hollers, Brent

    2017-01-01

    Documentation of ideas and the engineering design process is a critical, daily component of a professional engineer's job. While patent protection is often cited as the primary rationale for documentation, it can also benefit the engineer, the team, company, and stakeholders through creating a more rigorously designed and purposeful solution.…

  20. SRS ecology: Environmental information document

    Energy Technology Data Exchange (ETDEWEB)

    Wike, L.D.; Shipley, R.W.; Bowers, J.A. [and others

    1993-09-01

    The purpose of this Document is to provide a source of ecological information based on the exiting knowledge gained from research conducted at the Savannah River Site. This document provides a summary and synthesis of ecological research in the three main ecosystem types found at SRS and information on the threatened and endangered species residing there.

  1. ITK optical links backup document

    CERN Document Server

    Huffman, B T; The ATLAS collaboration; Flick, T; Ye, J

    2013-01-01

    This document describes the proposed optical links to be used for the ITK in the phase II upgrade. The current R&D for optical links pursued in the Versatile Link group is reviewed. In particular the results demonstrating the radiation tolerance of all the on-detector components are documented. The bandwidth requirements and the resulting numerology are given.

  2. Contextualizing Data Warehouses with Documents

    DEFF Research Database (Denmark)

    Perez, Juan Manuel; Berlanga, Rafael; Aramburu, Maria Jose

    2008-01-01

    warehouse with a document warehouse, resulting in a contextualized warehouse. Thus, the user first selects an analysis context by supplying some keywords. Then, the analysis is performed on a novel type of OLAP cube, called an R-cube, which is materialized by retrieving and ranking the documents...

  3. Patent Documents as a Resource for Studies and Education in Geophysics - An Approach.

    Science.gov (United States)

    Wollny, K. G.

    2016-12-01

    Patents are a highly neglected source of information in geophysics, although they supply a wealth of technical and historically relevant data and might be an important asset for researchers and students. The technical drawings and descriptions in patent documents provide insight into the personal work of a researcher or a scientific group and give detailed technical background information, show interdisciplinary solutions for similar problems, help to learn about inventions too advanced for their time but maybe useful now, and to explore the historical background and timelines of inventions and their inventors. It will be shown how to get access to patent documents and how to use them for research and education purposes. Exemplary inventions by well-known geoscientists or scientists in related fields will be presented to illustrate the usefulness of patent documents. The data pool used is the International Patent Classification (IPC) class G01V that the United Nations' World Intellectual Property Organisation (WIPO) has set up mainly for inventions with key aspects in geophysics. This class contains approximately 235,000 patent documents (July 2016) for methods, apparatuses or scientific instruments developed during scientific projects or by geophysical companies. The patent documents can be accessed via patent databases. The most important patent databases are for free, search functionality is self-explanatory and the amount of information to be extracted is enormous. For example, more than 90 million multilingual patent documents are currently available online (July 2016) in DEPATIS database of the German Patent and Trade Mark Office or ESPACENET of the European Patent Office. To summarize, patent documents are a highly useful tool for educational and research purposes to strengthen students' and scientists' knowledge in a practically orientated geophysical field and to widen the horizon to adjacent technical areas. Last but not least, they also provide insight

  4. Engineering Documentation and Data Control

    Science.gov (United States)

    Matteson, Michael J.; Bramley, Craig; Ciaruffoli, Veronica

    2001-01-01

    Mississippi Space Services (MSS) the facility services contractor for NASA's John C. Stennis Space Center (SSC), is utilizing technology to improve engineering documentation and data control. Two identified improvement areas, labor intensive documentation research and outdated drafting standards, were targeted as top priority. MSS selected AutoManager(R) WorkFlow from Cyco software to manage engineering documentation. The software is currently installed on over 150 desctops. The outdated SSC drafting standard was written for pre-CADD drafting methods, in other words, board drafting. Implementation of COTS software solutions to manage engineering documentation and update the drafting standard resulted in significant increases in productivity by reducing the time spent searching for documents.

  5. Short Communication First documented southern transatlantic ...

    African Journals Online (AJOL)

    The first documented recapture of a South African-tagged juvenile blue shark Prionace glauca off Uruguay lends weight to the hypothesis of a single blue shark population in the South Atlantic. The presence of neonate blue sharks with umbilical scars and females with post-parturition scars, as well as the high frequency of ...

  6. Word Spotting for Indic Documents to Facilitate Retrieval

    Science.gov (United States)

    Bhardwaj, Anurag; Setlur, Srirangaraj; Govindaraju, Venu

    With advances in the field of digitization of printed documents and several mass digitization projects underway, information retrieval and document search have emerged as key research areas. However, most of the current work in these areas is limited to English and a few oriental languages. The lack of efficient solutions for Indic scripts has hampered information extraction from a large body of documents of cultural and historical importance. This chapter presents two relevant topics in this area. First, we describe the use of a script-specific keyword spotting for Devanagari documents that makes use of domain knowledge of the script. Second, we address the needs of a digital library to provide access to a collection of documents from multiple scripts. This requires intelligent solutions which scale across different scripts. We present a script-independent keyword spotting approach for this purpose. Experimental results illustrate the efficacy of our methods.

  7. Guidance documents relating to landfills and contaminants

    Energy Technology Data Exchange (ETDEWEB)

    Schomaker, N.B.; Zunt, D.A.

    1990-01-01

    The Environmental Protection Agency is developing and updating a series of Technical Guidance Documents to provide best engineering control technology to meet the needs of the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response Compensation and Liability Act (CERCLA), respectively. These documents are the compilation of the research efforts to date relating to containment of pollutants from waste disposal to the land as relates to residuals management. The specific areas of research being conducted under the RCRA land disposal program relates to laboratory, pilot and field validation studies in cover systems, waste leaching and solidification, liner systems and disposal facility evaluation. The specific areas of research being conducted under the CERCLA uncontrolled waste sites (Superfund) program relate to in situ treatment, solidification/stabilization for treating hazardous waste, combustion technologies, best demonstrated available technology (BDAT), on-site treatment technologies, emerging biosystems, expert systems, personnel health protection equipment, and site and situation assessment. The Guidance Documents are intended to assist both the regulated community and the permitting authorities, as well as the Program Offices, and Regions, as well as the states and other interested parties, with the latest information relevant to waste management.

  8. The IAEA library and documentation services

    International Nuclear Information System (INIS)

    1963-01-01

    The library was established in 1958 and has since acquired a large and steadily increasing collection of nuclear science literature. The collection can be divided into three broad categories: (a) books, (b) periodicals, and (c) technical reports and official documents. There are at present approximately 19000 books in the library. The books cover all aspects of nuclear science and technology as well as some relevant branches of economics, law and other subjects. In addition, there are numerous reference books, both on science and on other subjects related to the work of the Agency. The library receives 7 00 periodicals, mostly of a scientific or technical nature. Sixty-three per cent of the periodicals are obtained by subscription and some 30 per cent as presentation copies. The rest of the periodicals are received under an exchange of publications. Of particular interest to research workers is a comprehensive collection of abstracting journals. The technical reports and documents are usually obtained from Member Governments and other international organizations, including the United Nations and the specialized agencies. There are nearly 50 000 reports, some 30 000 of which are on microcards. As international organizations and Member States supply the library with their documents and other publications on atomic energy on a routine basis, the collection in the library now represents much of the world's unclassified material on different branches of nuclear science and technology. The library also possesses about 5000 reprints and translations of technical reports

  9. Shoulder dystocia documentation: an evaluation of a documentation training intervention.

    Science.gov (United States)

    LeRiche, Tammy; Oppenheimer, Lawrence; Caughey, Sharon; Fell, Deshayne; Walker, Mark

    2015-03-01

    To evaluate the quality and content of nurse and physician shoulder dystocia delivery documentation before and after MORE training in shoulder dystocia management skills and documentation. Approximately 384 charts at the Ottawa Hospital General Campus involving a diagnosis of shoulder dystocia between the years of 2000 and 2006 excluding the training year of 2003 were identified. The charts were evaluated for 14 key components derived from a validated instrument. The delivery notes were then scored based on these components by 2 separate investigators who were blinded to delivery note author, date, and patient identification to further quantify delivery record quality. Approximately 346 charts were reviewed for physician and nurse delivery documentation. The average score for physician notes was 6 (maximum possible score of 14) both before and after the training intervention. The nurses' average score was 5 before and after the training intervention. Negligible improvement was observed in the content and quality of shoulder dystocia documentation before and after nurse and physician training.

  10. Surface Geophysical Exploration - Compendium Document

    International Nuclear Information System (INIS)

    Rucker, D.F.; Myers, D.A.

    2011-01-01

    This report documents the evolution of the surface geophysical exploration (SGE) program and highlights some of the most recent successes in imaging conductive targets related to past leaks within and around Hanford's tank farms. While it is noted that the SGE program consists of multiple geophysical techniques designed to (1) locate near surface infrastructure that may interfere with (2) subsurface plume mapping, the report will focus primarily on electrical resistivity acquisition and processing for plume mapping. Due to the interferences from the near surface piping network, tanks, fences, wells, etc., the results of the three-dimensional (3D) reconstruction of electrical resistivity was more representative of metal than the high ionic strength plumes. Since the first deployment, the focus of the SGE program has been to acquire and model the best electrical resistivity data that minimizes the influence of buried metal objects. Toward that goal, two significant advances have occurred: (1) using the infrastructure directly in the acquisition campaign and (2) placement of electrodes beneath the infrastructure. The direct use of infrastructure was successfully demonstrated at T farm by using wells as long electrodes (Rucker et al., 2010, 'Electrical-Resistivity Characterization of an Industrial Site Using Long Electrodes'). While the method was capable of finding targets related to past releases, a loss of vertical resolution was the trade-off. The burying of electrodes below the infrastructure helped to increase the vertical resolution, as long as a sufficient number of electrodes are available for the acquisition campaign.

  11. SURFACE GEOPHYSICAL EXPLORATION - COMPENDIUM DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    RUCKER DF; MYERS DA

    2011-10-04

    This report documents the evolution of the surface geophysical exploration (SGE) program and highlights some of the most recent successes in imaging conductive targets related to past leaks within and around Hanford's tank farms. While it is noted that the SGE program consists of multiple geophysical techniques designed to (1) locate near surface infrastructure that may interfere with (2) subsurface plume mapping, the report will focus primarily on electrical resistivity acquisition and processing for plume mapping. Due to the interferences from the near surface piping network, tanks, fences, wells, etc., the results of the three-dimensional (3D) reconstruction of electrical resistivity was more representative of metal than the high ionic strength plumes. Since the first deployment, the focus of the SGE program has been to acquire and model the best electrical resistivity data that minimizes the influence of buried metal objects. Toward that goal, two significant advances have occurred: (1) using the infrastructure directly in the acquisition campaign and (2) placement of electrodes beneath the infrastructure. The direct use of infrastructure was successfully demonstrated at T farm by using wells as long electrodes (Rucker et al., 2010, 'Electrical-Resistivity Characterization of an Industrial Site Using Long Electrodes'). While the method was capable of finding targets related to past releases, a loss of vertical resolution was the trade-off. The burying of electrodes below the infrastructure helped to increase the vertical resolution, as long as a sufficient number of electrodes are available for the acquisition campaign.

  12. [Familial combined hyperlipidemia: consensus document].

    Science.gov (United States)

    Mata, Pedro; Alonso, Rodrigo; Ruíz-Garcia, Antonio; Díaz-Díaz, Jose L; González, Noemí; Gijón-Conde, Teresa; Martínez-Faedo, Ceferino; Morón, Ignacio; Arranz, Ezequiel; Aguado, Rocío; Argueso, Rosa; Perez de Isla, Leopoldo

    2014-10-01

    Familial combined hyperlipidemia (FCH) is a frequent disorder associated with premature coronary artery disease. It is transmitted in an autosomal dominant manner, although there is not a unique gene involved. The diagnosis is performed using clinical criteria, and variability in lipid phenotype and family history of hyperlipidemia are necessaries. Frequently, the disorder is associated with type2 diabetes mellitus, arterial hypertension and central obesity. Patients with FCH are considered as high cardiovascular risk and the lipid target is an LDL-cholesterol <100mg/dL, and <70mg/dL if cardiovascular disease or type 2 diabetes are present. Patients with FCH require lipid lowering treatment using potent statins and sometimes, combined lipid-lowering treatment. Identification and management of other cardiovascular risk factors as type 2 diabetes and hypertension are fundamental to reduce cardiovascular disease burden. This document gives recommendations for the diagnosis and global treatment of patients with FCH directed to specialists and general practitioners. Copyright © 2014 Sociedad Española de Médicos de Atención Primaria (SEMERGEN). Publicado por Elsevier España. All rights reserved.

  13. Audit of Orthopaedic Surgical Documentation

    Directory of Open Access Journals (Sweden)

    Fionn Coughlan

    2015-01-01

    Full Text Available Introduction. The Royal College of Surgeons in England published guidelines in 2008 outlining the information that should be documented at each surgery. St. James’s Hospital uses a standard operation sheet for all surgical procedures and these were examined to assess documentation standards. Objectives. To retrospectively audit the hand written orthopaedic operative notes according to established guidelines. Methods. A total of 63 operation notes over seven months were audited in terms of date and time of surgery, surgeon, procedure, elective or emergency indication, operative diagnosis, incision details, signature, closure details, tourniquet time, postop instructions, complications, prosthesis, and serial numbers. Results. A consultant performed 71.4% of procedures; however, 85.7% of the operative notes were written by the registrar. The date and time of surgery, name of surgeon, procedure name, and signature were documented in all cases. The operative diagnosis and postoperative instructions were frequently not documented in the designated location. Incision details were included in 81.7% and prosthesis details in only 30% while the tourniquet time was not documented in any. Conclusion. Completion and documentation of operative procedures were excellent in some areas; improvement is needed in documenting tourniquet time, prosthesis and incision details, and the location of operative diagnosis and postoperative instructions.

  14. Documents

    International Development Research Centre (IDRC) Digital Library (Canada)

    livelihoods in spite of chronic water shortages. Farmers' Association: By the People for the People. Supported by WaDImena, a team from the Desert. Development Centre (DDC) at the American University in. Cairo helped farmers to found their first association to improve agricultural water management in Abu Minqar.

  15. Documentation of best interest by intensivists: a retrospective study in an Ontario critical care unit

    Directory of Open Access Journals (Sweden)

    Scales Damon C

    2010-02-01

    Full Text Available Abstract Background Intensive care physicians often must rely on substitute decision makers to address all dimensions of the construct of "best interest" for incapable, critically ill patients. This task involves identifying prior wishes and to facilitate the substitute decision maker's understanding of the incapable patient's condition and their likely response to treatment. We sought to determine how well such discussions are documented in a typical intensive care unit. Methods Using a quality of communication instrument developed from a literature search and expert opinion, 2 investigators transcribed and analyzed 260 handwritten communications for 105 critically ill patients who died in the intensive care unit between January and June 2006. Cohen's kappa was calculated before analysis and then disagreements were resolved by consensus. We report results on a per-patient basis to represent documented communication as a process leading up to the time of death in the ICU. We report frequencies and percentages for discrete data, median (m and interquartile range (IQR for continuous data. Results Our cohort was elderly (m 72, IQR 58-81 years and had high APACHE II scores predictive of a high probability of death (m 28, IQR 23-36. Length of stay in the intensive care unit prior to death was short (m 2, IQR 1-5 days, and withdrawal of life support preceded death for more than half (n 57, 54%. Brain death criteria were present for 18 patients (17%. Although intensivists' communications were timely (median 17 h from admission to critical care, the person consenting on behalf of the incapable patient was explicitly documented for only 10% of patients. Life support strategies at the time of communication were noted in 45% of charts, and options for their future use were presented in 88%. Considerations relevant to determining the patient's best interest in relation to the treatment plan were not well documented. While explicit survival estimates were

  16. Waste Acceptance System Requirements document (WASRD)

    International Nuclear Information System (INIS)

    1993-01-01

    This Waste Acceptance System Requirements document (WA-SRD) describes the functions to be performed and the technical requirements for a Waste Acceptance System for accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) into the Civilian Radioactive Waste Management System (CRWMS). This revision of the WA-SRD addresses the requirements for the acceptance of HLW. This revision has been developed as a top priority document to permit DOE's Office of Environmental Restoration and Waste Management (EM) to commence waste qualification runs at the Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) in a timely manner. Additionally, this revision of the WA-SRD includes the requirements from the Physical System Requirements -- Accept Waste document for the acceptance of SNF. A subsequent revision will fully address requirements relative to the acceptance of SNF

  17. Document Management in Local Government.

    Science.gov (United States)

    Williams, Bernard J. S.

    1998-01-01

    The latest in electronic document management in British local government is discussed. Finance, revenues, and benefits systems of leading vendors to local authorities are highlighted. A planning decisions archive management system and other information services are discussed. (AEF)

  18. Vietnamese Document Representation and Classification

    Science.gov (United States)

    Nguyen, Giang-Son; Gao, Xiaoying; Andreae, Peter

    Vietnamese is very different from English and little research has been done on Vietnamese document classification, or indeed, on any kind of Vietnamese language processing, and only a few small corpora are available for research. We created a large Vietnamese text corpus with about 18000 documents, and manually classified them based on different criteria such as topics and styles, giving several classification tasks of different difficulty levels. This paper introduces a new syllable-based document representation at the morphological level of the language for efficient classification. We tested the representation on our corpus with different classification tasks using six classification algorithms and two feature selection techniques. Our experiments show that the new representation is effective for Vietnamese categorization, and suggest that best performance can be achieved using syllable-pair document representation, an SVM with a polynomial kernel as the learning algorithm, and using Information gain and an external dictionary for feature selection.

  19. Virtual Library Design Document; TOPICAL

    International Nuclear Information System (INIS)

    M. A. deLamare

    2001-01-01

    The objective of this document is to establish a design for the virtual library user and administrative layers that complies with the requirements of the virtual library software specification and subordinate module specification

  20. Reactor operation environmental information document

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, L.R.; Hayes, D.W.; Hunter, C.H.; Marter, W.L.; Moyer, R.A.

    1989-12-01

    This volume is a reactor operation environmental information document for the Savannah River Plant. Topics include meteorology, surface hydrology, transport, environmental impacts, and radiation effects. 48 figs., 56 tabs. (KD)

  1. ENDF/B summary documentation

    International Nuclear Information System (INIS)

    Kinsey, R.

    1979-07-01

    This publication provides a localized source of descriptions for the evaluations contained in the ENDF/B Library. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The summary documentations were written by the CSEWB (Cross Section Evaluation Working Group) evaluators and compiled by NNDC (National Nuclear Data Center). This edition includes documentation for materials found on ENDF/B Version V tapes 501 to 516 (General Purpose File) excluding tape 504. ENDF/B-V also includes tapes containing partial evaluations for the Special Purpose Actinide (521, 522), Dosimetry (531), Activation (532), Gas Production (533), and Fission Product (541-546) files. The materials found on these tapes are documented elsewhere. Some of the evaluation descriptions in this report contain cross sections or energy level information

  2. CERN Document Server (CDS): Introduction

    CERN Multimedia

    CERN. Geneva; Costa, Flavio

    2017-01-01

    A short online tutorial introducing the CERN Document Server (CDS). Basic functionality description, the notion of Revisions and the CDS test environment. Links: CDS Production environment CDS Test environment  

  3. ENDF/B summary documentation

    Energy Technology Data Exchange (ETDEWEB)

    Kinsey, R. (comp.)

    1979-07-01

    This publication provides a localized source of descriptions for the evaluations contained in the ENDF/B Library. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The summary documentations were written by the CSEWB (Cross Section Evaluation Working Group) evaluators and compiled by NNDC (National Nuclear Data Center). This edition includes documentation for materials found on ENDF/B Version V tapes 501 to 516 (General Purpose File) excluding tape 504. ENDF/B-V also includes tapes containing partial evaluations for the Special Purpose Actinide (521, 522), Dosimetry (531), Activation (532), Gas Production (533), and Fission Product (541-546) files. The materials found on these tapes are documented elsewhere. Some of the evaluation descriptions in this report contain cross sections or energy level information. (RWR)

  4. Documentation: an effective tool in Farmer Field Schools

    NARCIS (Netherlands)

    Belder, den E.; Garcia, M.; Jansen, D.M.

    2006-01-01

    In the “Sustainable Coffee Project Peru”, relevant and well documented data has played an important role in supporting the learning processes of the Farmer Field Schools. This is illustrated here with three examples: a survey of the coffee farmers’ situation as a basis for developing the content of

  5. Distance matters! Cumulative proximity expansions for ranking documents

    NARCIS (Netherlands)

    J.B.P. Vuurens (Jeroen); A.P. de Vries (Arjen)

    2014-01-01

    htmlabstractIn the information retrieval process, functions that rank documents according to their estimated relevance to a query typically regard query terms as being independent. However, it is often the joint presence of query terms that is of interest to the user, which is overlooked when

  6. Document development, management and transmission

    International Nuclear Information System (INIS)

    Meister, K.

    1998-01-01

    Environmental monitoring can only be carried out by means of cartographic outputs allowing the representation of information in a compressed way and with a local reference. On account of this requirement and the continuously growing importance of international data exchange the development of a universal tool for the combination of data to so-called documents has been started for the management and for the exchange of these documents with other systems. (R.P.)

  7. ENDF/B summary documentation

    International Nuclear Information System (INIS)

    Garber, D.

    1975-10-01

    Descriptions of the evaluations contained in the ENDF/B library are given. The summary documentation presented is intended to be a more detailed description than the (File 1) comments contained in the computer-readable data files, but not so detailed as the formal reports describing each ENDF/B evaluation. The documentations were written by the CSEWG evaluators and compiled by NNCSC. Selected materials which comprise this volume include from 1 H to 244 Cm

  8. Storing XML Documents in Databases

    OpenAIRE

    Schmidt, A.R.; Manegold, Stefan; Kersten, Martin; Rivero, L.C.; Doorn, J.H.; Ferraggine, V.E.

    2005-01-01

    textabstractThe authors introduce concepts for loading large amounts of XML documents into databases where the documents are stored and maintained. The goal is to make XML databases as unobtrusive in multi-tier systems as possible and at the same time provide as many services defined by the XML standards as possible. The ubiquity of XML has sparked great interest in deploying concepts known from Relational Database Management Systems such as declarative query languages, transactions, indexes ...

  9. Patterns for Effectively Documenting Frameworks

    Science.gov (United States)

    Aguiar, Ademar; David, Gabriel

    Good design and implementation are necessary but not sufficient pre-requisites for successfully reusing object-oriented frameworks. Although not always recognized, good documentation is crucial for effective framework reuse, and often hard, costly, and tiresome, coming with many issues, especially when we are not aware of the key problems and respective ways of addressing them. Based on existing literature, case studies and lessons learned, the authors have been mining proven solutions to recurrent problems of documenting object-oriented frameworks, and writing them in pattern form, as patterns are a very effective way of communicating expertise and best practices. This paper presents a small set of patterns addressing problems related to the framework documentation itself, here seen as an autonomous and tangible product independent of the process used to create it. The patterns aim at helping non-experts on cost-effectively documenting object-oriented frameworks. In concrete, these patterns provide guidance on choosing the kinds of documents to produce, how to relate them, and which contents to include. Although the focus is more on the documents themselves, rather than on the process and tools to produce them, some guidelines are also presented in the paper to help on applying the patterns to a specific framework.

  10. Qualitative analysis of national documents on health care services and pharmaceuticals` purchasing challenges: evidence from Iran.

    Science.gov (United States)

    Bastani, Peivand; Samadbeik, Mahnaz; Dinarvand, Rassoul; Kashefian-Naeeini, Sara; Vatankhah, Soudabeh

    2018-06-05

    Iranian health sector encountered many challenges in resource allocation and health service purchasing during the past decades, the aim of this study was to determine the main challenges of the present process of health service purchasing for national policymakers and other developing countries with the same setting. It was a qualitative study carried out via the complete content analysis of all relevant national documents from 2007 to 2014. In order to retrieve the related documents, we searched the official websites related to the Ministry of Health and Medical Education, four main Iranian insurance organizations, the Health Committee of the Parliament Profile, strategic vice president's site and Supreme Insurance Council. After recognition of documents, their credibility and authenticity were evaluated in terms of their publication or adjustment. For the analysis of documents, the four step-Scott method was used applying MAXQDA version 10. Findings illustrated that health service purchase challenges in the country can be classified in 6 main themes of policy-making, executive, intersectional, natural, legal and informational challenges with 26 subthemes. Furthermore, 5 themes of Basic Benefit Package, Reimbursement,Decision making, Technology and Contract are considered as the main Challenges in pharmaceutical purchasing area containing 13 relevant subthemes. It seems that according to documents, Iran has faced many structural and procedural problems with the purchase of the best health interventions. So it is highly recommended to consider consequences derived from the present challenges and try to use these evidences in their policy making process to decrease the existed problems and move to better procurement of health interventions.

  11. Multiple sclerosis documentation system (MSDS): moving from documentation to management of MS patients.

    Science.gov (United States)

    Ziemssen, Tjalf; Kempcke, Raimar; Eulitz, Marco; Großmann, Lars; Suhrbier, Alexander; Thomas, Katja; Schultheiss, Thorsten

    2013-09-01

    The long disease duration of multiple sclerosis and the increasing therapeutic options require a individualized therapeutic approach which should be carefully documented over years of observation. To switch from MS documentation to an innovative MS management, new computer- and internet-based tools could be implemented as we could demonstrate with the novel computer-based patient management system "multiple sclerosis management system 3D" (MSDS 3D). MSDS 3D allows documentation and management of visit schedules and mandatory examinations via defined study modules by integration of data input from various sources (patients, attending physicians and MS nurses). It provides forms for the documentation of patient visits as well as clinical and diagnostic findings. Information can be collected via interactive touch screens. Specific modules allow the management of highly efficacious treatments as natalizumab or fingolimod. MSDS can be used to transfer the documented data to databases as, e.g. the registry of the German MS society or REGIMS. MSDS has already been implemented successfully in clinical practice and is currently being evaluated in a multicenter setting. High-quality management and documentation are crucial for improvements in clinical practice and research work.

  12. Classification of high-resolution multi-swath hyperspectral data using Landsat 8 surface reflectance data as a calibration target and a novel histogram based unsupervised classification technique to determine natural classes from biophysically relevant fit parameters

    Science.gov (United States)

    McCann, C.; Repasky, K. S.; Morin, M.; Lawrence, R. L.; Powell, S. L.

    2016-12-01

    Compact, cost-effective, flight-based hyperspectral imaging systems can provide scientifically relevant data over large areas for a variety of applications such as ecosystem studies, precision agriculture, and land management. To fully realize this capability, unsupervised classification techniques based on radiometrically-calibrated data that cluster based on biophysical similarity rather than simply spectral similarity are needed. An automated technique to produce high-resolution, large-area, radiometrically-calibrated hyperspectral data sets based on the Landsat surface reflectance data product as a calibration target was developed and applied to three subsequent years of data covering approximately 1850 hectares. The radiometrically-calibrated data allows inter-comparison of the temporal series. Advantages of the radiometric calibration technique include the need for minimal site access, no ancillary instrumentation, and automated processing. Fitting the reflectance spectra of each pixel using a set of biophysically relevant basis functions reduces the data from 80 spectral bands to 9 parameters providing noise reduction and data compression. Examination of histograms of these parameters allows for determination of natural splitting into biophysical similar clusters. This method creates clusters that are similar in terms of biophysical parameters, not simply spectral proximity. Furthermore, this method can be applied to other data sets, such as urban scenes, by developing other physically meaningful basis functions. The ability to use hyperspectral imaging for a variety of important applications requires the development of data processing techniques that can be automated. The radiometric-calibration combined with the histogram based unsupervised classification technique presented here provide one potential avenue for managing big-data associated with hyperspectral imaging.

  13. A document processing pipeline for annotating chemical entities in scientific documents.

    Science.gov (United States)

    Campos, David; Matos, Sérgio; Oliveira, José L

    2015-01-01

    The recognition of drugs and chemical entities in text is a very important task within the field of biomedical information extraction, given the rapid growth in the amount of published texts (scientific papers, patents, patient records) and the relevance of these and other related concepts. If done effectively, this could allow exploiting such textual resources to automatically extract or infer relevant information, such as drug profiles, relations and similarities between drugs, or associations between drugs and potential drug targets. The objective of this work was to develop and validate a document processing and information extraction pipeline for the identification of chemical entity mentions in text. We used the BioCreative IV CHEMDNER task data to train and evaluate a machine-learning based entity recognition system. Using a combination of two conditional random field models, a selected set of features, and a post-processing stage, we achieved F-measure results of 87.48% in the chemical entity mention recognition task and 87.75% in the chemical document indexing task. We present a machine learning-based solution for automatic recognition of chemical and drug names in scientific documents. The proposed approach applies a rich feature set, including linguistic, orthographic, morphological, dictionary matching and local context features. Post-processing modules are also integrated, performing parentheses correction, abbreviation resolution and filtering erroneous mentions using an exclusion list derived from the training data. The developed methods were implemented as a document annotation tool and web service, freely available at http://bioinformatics.ua.pt/becas-chemicals/.

  14. Improving a gold standard: treating human relevance judgments of MEDLINE document pairs

    Directory of Open Access Journals (Sweden)

    Kim Won

    2011-06-01

    Full Text Available Abstract Given prior human judgments of the condition of an object it is possible to use these judgments to make a maximal likelihood estimate of what future human judgments of the condition of that object will be. However, if one has a reasonably large collection of similar objects and the prior human judgments of a number of judges regarding the condition of each object in the collection, then it is possible to make predictions of future human judgments for the whole collection that are superior to the simple maximal likelihood estimate for each object in isolation. This is possible because the multiple judgments over the collection allow an analysis to determine the relative value of a judge as compared with the other judges in the group and this value can be used to augment or diminish a particular judge’s influence in predicting future judgments. Here we study and compare five different methods for making such improved predictions and show that each is superior to simple maximal likelihood estimates.

  15. Gaz de France. 2006 reference document; Gaz de France. Document de reference 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This document was issued by Gaz de France, the French gas utility, at the occasion of the opening of the capital of the company. It is intended to shareholders and presents the relevant informations relative to the annual consolidated financial statements of the group according to IFRS and French standards for the year 2005 (selected financial information, business overview, liquidity and capital resources, profit forecasts or estimates, compensation and benefits, issuer assets etc..). It includes also some complementary information about the activities of the group, its estate property, plants and equipments, its R and D and patenting activities, its management and administration, its 2005 and 2006 contracts etc.. (J.S.)

  16. Modeling Documents with Event Model

    Directory of Open Access Journals (Sweden)

    Longhui Wang

    2015-08-01

    Full Text Available Currently deep learning has made great breakthroughs in visual and speech processing, mainly because it draws lessons from the hierarchical mode that brain deals with images and speech. In the field of NLP, a topic model is one of the important ways for modeling documents. Topic models are built on a generative model that clearly does not match the way humans write. In this paper, we propose Event Model, which is unsupervised and based on the language processing mechanism of neurolinguistics, to model documents. In Event Model, documents are descriptions of concrete or abstract events seen, heard, or sensed by people and words are objects in the events. Event Model has two stages: word learning and dimensionality reduction. Word learning is to learn semantics of words based on deep learning. Dimensionality reduction is the process that representing a document as a low dimensional vector by a linear mode that is completely different from topic models. Event Model achieves state-of-the-art results on document retrieval tasks.

  17. Guidance for preparing user requirements documents for small and medium reactors and their application

    International Nuclear Information System (INIS)

    2000-08-01

    During the past decade, several countries with highly developed nuclear power programs established user required documents (URDs) to guide the development and implementation of advanced light water reactors. These efforts built upon the extensive experience with operating reactors and included new insights from ongoing research and development to enhance the economic performance and safety of future nuclear power plants. Subsequently, a number of developing countries with plans for introducing nuclear energy into their national programs expressed strong interest in establishing analogous requirements. The IAEA has therefore taken the initiative to assist in the elaboration of such requirements. Building upon relevant documents this report recommends a URD structure and content outline to support developing countries in preparing their URDs for various applications of small and medium reactors (e.g. electricity generation and/or desalination). This report was prepared by representatives from both developing and developed Member States

  18. Terminologie de Base de la Documentation. (Basic Terminology of Documentation).

    Science.gov (United States)

    Commission des Communautes Europeennes (Luxembourg). Bureau de Terminologie.

    This glossary is designed to aid non-specialists whose activities require that they have some familiarity with the terminology of the modern methods of documentation. Definitions have been assembled from various dictionaries, manuals, etc., with particular attention being given to the publications of UNESCO and the International Standards…

  19. Reactor operation environmental information document

    Energy Technology Data Exchange (ETDEWEB)

    Haselow, J.S.; Price, V.; Stephenson, D.E.; Bledsoe, H.W.; Looney, B.B.

    1989-12-01

    The Savannah River Site (SRS) produces nuclear materials, primarily plutonium and tritium, to meet the requirements of the Department of Defense. These products have been formed in nuclear reactors that were built during 1950--1955 at the SRS. K, L, and P reactors are three of five reactors that have been used in the past to produce the nuclear materials. All three of these reactors discontinued operation in 1988. Currently, intense efforts are being extended to prepare these three reactors for restart in a manner that protects human health and the environment. To document that restarting the reactors will have minimal impacts to human health and the environment, a three-volume Reactor Operations Environmental Impact Document has been prepared. The document focuses on the impacts of restarting the K, L, and P reactors on both the SRS and surrounding areas. This volume discusses the geology, seismology, and subsurface hydrology. 195 refs., 101 figs., 16 tabs.

  20. Magnetic fusion: Environmental Readiness Document

    International Nuclear Information System (INIS)

    1981-03-01

    Environmental Readiness Documents are prepared periodically to review and evaluate the environmental status of an energy technology during the several phases of development of that technology. Through these documents, the Office of Environment within the Department of Energy provides an independent and objective assessment of the environmental risks and potential impacts associated with the progression of the technology to the next stage of development and with future extensive use of the technology. This Environmental Readiness Document was prepared to assist the Department of Energy in evaluating the readiness of magnetic fusion technology with respect to environmental issues. An effort has been made to identify potential environmental problems that may be encountered based upon current knowledge, proposed and possible new environmental regulations, and the uncertainties inherent in planned environmental research

  1. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    KRIPPS, L.J.

    2005-02-18

    This document describes the qualitative evaluation of frequency and consequences for double shell tank (DST) and single shell tank (SST) representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant SSCs and/or TSRS were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support of the Tank Farms Documented Safety Analysis (DSA) and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  2. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    KRIPPS, L.J.

    2005-03-03

    This document describes the qualitative evaluation of frequency and consequences for DST and SST representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant structures, systems and components (SSCs) and/or technical safety requirements (TSRs) were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support WP-13033, Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  3. ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M. Maniyar

    2004-06-22

    The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

  4. Waste management system requirements document

    International Nuclear Information System (INIS)

    1991-02-01

    This volume defines the top level requirements for the Mined Geologic Disposal System (MGDS). It is designed to be used in conjunction with Volume 1 of the WMSR, General System Requirements. It provides a functional description expanding the requirements allocated to the MGDS in Volume 1 and elaborates on each requirement by providing associated performance criteria as appropriate. Volumes 1 and 4 of the WMSR provide a minimum set of requirements that must be satisfied by the final MGDS design. This document sets forth specific requirements that must be fulfilled. It is not the intent or purpose of this top level document to describe how each requirement is to be satisfied in the final MGDS design. Each subsequent level of the technical document hierarchy must provide further guidance and definition as to how each of these requirements is to be implemented in the design. It is expected that each subsequent level of requirements will be significantly more detailed. Section 2 of this volume provides a functional description of the MGDS. Each function is addressed in terms of requirements, and performance criteria. Section 3 provides a list of controlling documents. Each document cited in a requirement of Chapter 2 is included in this list and is incorporated into this document as a requirement on the final system. The WMSR addresses only federal requirements (i.e., laws, regulations and DOE orders). State and local requirements are not addressed. However, it will be specifically noted at the potentially affected WMSR requirements that there could be additional or more stringent regulations imposed by a state or local requirements or administering agency over the cited federal requirements

  5. Relevance of Donation to Special Federal Tertiary Institution ...

    African Journals Online (AJOL)

    While structured and open-ended interview and relevant documents, including gift and donation files, acquisition records and library accession registers were used to collect data for the study. The population of the study consisted of the Special Federal Tertiary Institution Libraries under study while the subjects of the study ...

  6. JournalMap: Geo-semantic searching for relevant knowledge

    Science.gov (United States)

    Ecologists struggling to understand rapidly changing environments and evolving ecosystem threats need quick access to relevant research and documentation of natural systems. The advent of semantic and aggregation searching (e.g., Google Scholar, Web of Science) has made it easier to find useful lite...

  7. Balancing relevance criteria through multi-objective optimization

    NARCIS (Netherlands)

    van Doorn, J.; Odijk, D.; Roijers, D.M.; de Rijke, M.

    2016-01-01

    Offline evaluation of information retrieval systems typically focuses on a single effectiveness measure that models the utility for a typical user. Such a measure usually combines a behavior-based rank discount with a notion of document utility that captures the single relevance criterion of

  8. Reflections on rural people's knowledge and skill and relevance in ...

    African Journals Online (AJOL)

    UNLICENSED

    objective is to assess the relevance of indigenous knowledge in agriculture. ... transmit the knowledge to the youths and researchers to document it and government to protect it. ... mechanisms to protect the earth's biological diversity. ... and other development agencies to embrace Agenda 21 as .... ecological characteristics.

  9. Semantic Annotation of Unstructured Documents Using Concepts Similarity

    Directory of Open Access Journals (Sweden)

    Fernando Pech

    2017-01-01

    Full Text Available There is a large amount of information in the form of unstructured documents which pose challenges in the information storage, search, and retrieval. This situation has given rise to several information search approaches. Some proposals take into account the contextual meaning of the terms specified in the query. Semantic annotation technique can help to retrieve and extract information in unstructured documents. We propose a semantic annotation strategy for unstructured documents as part of a semantic search engine. In this proposal, ontologies are used to determine the context of the entities specified in the query. Our strategy for extracting the context is focused on concepts similarity. Each relevant term of the document is associated with an instance in the ontology. The similarity between each of the explicit relationships is measured through the combination of two types of associations: the association between each pair of concepts and the calculation of the weight of the relationships.

  10. Document segmentation via oblique cuts

    Science.gov (United States)

    Svendsen, Jeremy; Branzan-Albu, Alexandra

    2013-01-01

    This paper presents a novel solution for the layout segmentation of graphical elements in Business Intelligence documents. We propose a generalization of the recursive X-Y cut algorithm, which allows for cutting along arbitrary oblique directions. An intermediate processing step consisting of line and solid region removal is also necessary due to presence of decorative elements. The output of the proposed segmentation is a hierarchical structure which allows for the identification of primitives in pie and bar charts. The algorithm was tested on a database composed of charts from business documents. Results are very promising.

  11. Environmental information document defense waste processing facility

    International Nuclear Information System (INIS)

    1981-07-01

    This report documents the impact analysis of a proposed Defense Waste Processing Facility (DWPF) for immobilizing high-level waste currently being stored on an interim basis at the Savannah River Plant (SRP). The DWPF will process the waste into a form suitable for shipment to and disposal in a federal repository. The DWPF will convert the high-level waste into: a leach-resistant form containing above 99.9% of all the radioactivity, and a residue of slightly contaminated salt. The document describes the SRP site and environs, including population, land and water uses; surface and subsurface soils and waters; meteorology; and ecology. A conceptual integrated facility for concurrently producing glass waste and saltcrete is described, and the environmental effects of constructing and operating the facility are presented. Alternative sites and waste disposal options are addressed. Also environmental consultations and permits are discussed

  12. Assessment of LANL beryllium waste management documentation

    International Nuclear Information System (INIS)

    Danna, J.G.; Jennrich, E.A.; Lund, D.M.; Davis, K.D.; Hoevemeyer, S.S.

    1991-04-01

    The objective of this report is to determine present status of the preparation and implementation of the various high priority documents required to properly manage the beryllium waste generated at the Laboratory. The documents being assessed are: Waste Acceptance Criteria, Waste Characterization Plan, Waste Certification Plan, Waste Acceptance Procedures, Waste Characterization Procedures, Waste Certification Procedures, Waste Training Procedures and Waste Recordkeeping Procedures. Beryllium is regulated (as a dust) under 40 CFR 261.33 as ''Discarded commercial chemical products, off specification species, container residues and spill residues thereof.'' Beryllium is also identified in the 3rd thirds ruling of June 1, 1990 as being restricted from land disposal (as a dust). The beryllium waste generated at the Laboratory is handled separately because beryllium has been identified as a highly toxic carcinogenic material

  13. Documentation for the viscoplastic and creep program

    DEFF Research Database (Denmark)

    Bellini, Anna

    2004-01-01

    of this workpackage is to simulate creep behavior of aluminum cast samples subjected to high temperature. In this document a two-state variables unified model is applied in order to simulate creep behavior and time-dependent metallurgical changes. The fundamental assumption of the unified theory is that creep...... is run using the material data obtained through the mentioned experimental study. The results obtained for the simulation of tensile tests and of creep tests are compared with experimental curves, showing a good agreement. Moreover, the document describes the results obtained during the first...... is quite stable and convergence can be reached also with big time steps. Keywords: Viscoplasticity, creep, unified constitutive model, aluminum, high temperature....

  14. Mined Geologic Disposal System Requirements Document

    International Nuclear Information System (INIS)

    1994-03-01

    This Mined Geologic Disposal System Requirements Document (MGDS-RD) describes the functions to be performed by, and the requirements for, a Mined Geologic Disposal System (MGDS) for the permanent disposal of spent nuclear fuel (SNF) (including SNF loaded in multi-purpose canisters (MPCs)) and commercial and defense high-level radioactive waste (HLW) in support of the Civilian Radioactive Waste Management System (CRWMS). The purpose of the MGDS-RD is to define the program-level requirements for the design of the Repository, the Exploratory Studies Facility (ESF), and Surface Based Testing Facilities (SBTF). These requirements include design, operation, and decommissioning requirements to the extent they impact on the physical development of the MGDS. The document also presents an overall description of the MGDS, its functions (derived using the functional analysis documented by the Physical System Requirements (PSR) documents as a starting point), its segments as described in Section 3.1.3, and the requirements allocated to the segments. In addition, the program-level interfaces of the MGDS are identified. As such, the MGDS-RD provides the technical baseline for the design of the MGDS

  15. High-risk clinical target volume delineation in CT-guided cervical cancer brachytherapy - Impact of information from FIGO stage with or without systematic inclusion of 3D documentation of clinical gynecological examination

    Energy Technology Data Exchange (ETDEWEB)

    Hegazy, Neamat [Dept. of Radiotherapy, Comprehensive Cancer Centre Vienna, Medical Univ. of Vienna, Vienna (Austria); Dept. of Clinical Oncology, Medical Univ. of Alexandria, Alexandria (Egypt); Poetter Rickard; Kirisits, Christian [Dept. of Radiotherapy, Comprehensive Cancer Centre Vienna, Medical Univ. of Vienna, Vienna (Austria); Christian Doppler Lab. for Medical Radiation Research for Radiation Oncology, Medical Univ. Vienna (Austria); Berger, Daniel; Federico, Mario; Sturdza, Alina; Nesvacil, Nicole [Dept. of Radiotherapy, Comprehensive Cancer Centre Vienna, Medical Univ. of Vienna, Vienna (Austria)], e-mail: nicole.nesvacil@meduniwien.ac.at

    2013-10-15

    Purpose: The aim of the study was to improve computed tomography (CT)-based high-risk clinical target volume (HR CTV) delineation protocols for cervix cancer patients, in settings without any access to magnetic resonance imaging (MRI) at the time of brachytherapy. Therefore the value of a systematic integration of comprehensive three-dimensional (3D) documentation of repetitive gynecological examination for CT-based HR CTV delineation protocols, in addition to information from FIGO staging, was investigated. In addition to a comparison between reference MRI contours and two different CT-based contouring methods (using complementary information from FIGO staging with or without additional 3D clinical drawings), the use of standardized uterine heights was also investigated. Material and methods: Thirty-five cervix cancer patients with CT- and MR-images and 3D clinical drawings at time of diagnosis and brachytherapy were included. HR CTV{sub stage} was based on CT information and FIGO stage. HR CTV{sub stage} {sub +3Dclin} was contoured on CT using FIGO stage and 3D clinical drawing. Standardized HR CTV heights were: 1/1, 2/3 and 1/2 of uterine height. MRI-based HR CTV was delineated independently. Resulting widths, thicknesses, heights, and volumes of HR CTV{sub stage}, HR CTV{sub stage+3Dclin} and MRI-based HR CTV contours were compared. Results: The overall normalized volume ratios (mean{+-}SD of CT/MRI{sub ref} volume) of HR CTV{sub stage} and HR{sub stage+3Dclin} were 2.6 ({+-}0.6) and 2.1 ({+-}0.4) for 1/1 and 2.3 ({+-}0.5) and 1.8 ({+-}0.4), for 2/3, and 1.9 ({+-}0.5) and 1.5 ({+-}0.3), for 1/2 of uterine height. The mean normalized widths were 1.5{+-}0.2 and 1.2{+-}0.2 for HR CTV{sub stage} and HR CTV{sub stage+3Dclin}, respectively (p < 0.05). The mean normalized heights for HR CTV{sub stage} and HR CTV{sub stage+3Dclin} were both 1.7{+-}0.4 for 1/1 (p < 0.05.), 1.3{+-}0.3 for 2/3 (p < 0.05) and 1.1{+-}0.3 for 1/2 of uterine height. Conclusion: CT-based HR

  16. Jamaica: report documents homophobia and violence.

    Science.gov (United States)

    Schleifer, Rebecca

    2005-04-01

    In November 2004, Human Rights Watch (HRW) released a report documenting widespread violence and discrimination against people living with, and at high risk of, HIV/AIDS in Jamaica. The report alleges police use Jamaica's Victorian-era sodomy laws, which criminalize consensual sex between adult men, as a basis to harass and persecute people suspected of homosexual conduct and peer educators who provide HIV/AIDS information and condoms to them.

  17. Performance assurance of the re-applying project documentation

    Science.gov (United States)

    Kozlova, Olga

    2017-10-01

    Usage of the re-applying project documentation is cost effective measure. Saving of budgetary funds for purchases for development of new project documentation occurs by means of it. It also becomes possible to consider better decisions and prevent the repetition of mistakes. Nowadays, state authorities in construction management are forming separate institute for re-applying project documentation. The article shows the main tasks of such events and the issues to be solved for achievement of a high positive result.

  18. Mexico City normal weight children exposed to high concentrations of ambient PM2.5 show high blood leptin and endothelin-1, vitamin D deficiency, and food reward hormone dysregulation versus low pollution controls. Relevance for obesity and Alzheimer disease.

    Science.gov (United States)

    Calderón-Garcidueñas, Lilian; Franco-Lira, Maricela; D'Angiulli, Amedeo; Rodríguez-Díaz, Joel; Blaurock-Busch, Eleonore; Busch, Yvette; Chao, Chih-kai; Thompson, Charles; Mukherjee, Partha S; Torres-Jardón, Ricardo; Perry, George

    2015-07-01

    Millions of Mexico, US and across the world children are overweight and obese. Exposure to fossil-fuel combustion sources increases the risk for obesity and diabetes, while long-term exposure to fine particulate matter (PM2.5) and ozone (O3) above US EPA standards is associated with increased risk of Alzheimer's disease (AD). Mexico City Metropolitan Area children are chronically exposed to PM2.5 and O3 concentrations above the standards and exhibit systemic, brain and intrathecal inflammation, cognitive deficits, and Alzheimer disease neuropathology. We investigated adipokines, food reward hormones, endothelial dysfunction, vitamin D and apolipoprotein E (APOE) relationships in 80 healthy, normal weight 11.1±3.2 year olds matched by age, gender, BMI and SES, low (n: 26) versus high (n:54) PM2.5 exposures. Mexico City children had higher leptin and endothelin-1 (pMexico City APOE 4 versus 3 children had higher glucose (p=0.009). Serum 25-hydroxyvitamin DMexico City children. Leptin is strongly positively associated to PM 2.5 cumulative exposures. Residing in a high PM2.5 and O3 environment is associated with 12h fasting hyperleptinemia, altered appetite-regulating peptides, vitamin D deficiency, and increases in ET-1 in clinically healthy children. These changes could signal the future trajectory of urban children towards the development of insulin resistance, obesity, type II diabetes, premature cardiovascular disease, addiction-like behavior, cognitive impairment and Alzheimer's disease. Increased efforts should be made to decrease pediatric PM2.5 exposures, to deliver health interventions prior to the development of obesity and to identify and mitigate environmental factors influencing obesity and Alzheimer disease. Copyright © 2015 Elsevier Inc. All rights reserved.

  19. Rapid Exploitation and Analysis of Documents

    Energy Technology Data Exchange (ETDEWEB)

    Buttler, D J; Andrzejewski, D; Stevens, K D; Anastasiu, D; Gao, B

    2011-11-28

    Analysts are overwhelmed with information. They have large archives of historical data, both structured and unstructured, and continuous streams of relevant messages and documents that they need to match to current tasks, digest, and incorporate into their analysis. The purpose of the READ project is to develop technologies to make it easier to catalog, classify, and locate relevant information. We approached this task from multiple angles. First, we tackle the issue of processing large quantities of information in reasonable time. Second, we provide mechanisms that allow users to customize their queries based on latent topics exposed from corpus statistics. Third, we assist users in organizing query results, adding localized expert structure over results. Forth, we use word sense disambiguation techniques to increase the precision of matching user generated keyword lists with terms and concepts in the corpus. Fifth, we enhance co-occurrence statistics with latent topic attribution, to aid entity relationship discovery. Finally we quantitatively analyze the quality of three popular latent modeling techniques to examine under which circumstances each is useful.

  20. Melter Disposal Strategic Planning Document

    Energy Technology Data Exchange (ETDEWEB)

    BURBANK, D.A.

    2000-09-25

    This document describes the proposed strategy for disposal of spent and failed melters from the tank waste treatment plant to be built by the Office of River Protection at the Hanford site in Washington. It describes program management activities, disposal and transportation systems, leachate management, permitting, and safety authorization basis approvals needed to execute the strategy.

  1. Compression of Probabilistic XML Documents

    Science.gov (United States)

    Veldman, Irma; de Keijzer, Ander; van Keulen, Maurice

    Database techniques to store, query and manipulate data that contains uncertainty receives increasing research interest. Such UDBMSs can be classified according to their underlying data model: relational, XML, or RDF. We focus on uncertain XML DBMS with as representative example the Probabilistic XML model (PXML) of [10,9]. The size of a PXML document is obviously a factor in performance. There are PXML-specific techniques to reduce the size, such as a push down mechanism, that produces equivalent but more compact PXML documents. It can only be applied, however, where possibilities are dependent. For normal XML documents there also exist several techniques for compressing a document. Since Probabilistic XML is (a special form of) normal XML, it might benefit from these methods even more. In this paper, we show that existing compression mechanisms can be combined with PXML-specific compression techniques. We also show that best compression rates are obtained with a combination of PXML-specific technique with a rather simple generic DAG-compression technique.

  2. BASIC Instructional Program: System Documentation.

    Science.gov (United States)

    Dageforde, Mary L.

    This report documents the BASIC Instructional Program (BIP), a "hands-on laboratory" that teaches elementary programming in the BASIC language, as implemented in the MAINSAIL language, a machine-independent revision of SAIL which should facilitate implementation of BIP on other computing systems. Eight instructional modules which make up…

  3. The Darfur Atrocities Documentation Project

    Science.gov (United States)

    Totten, Samuel

    2004-01-01

    One of the many important aspects of the Darfur Atrocities Documentation Project was that it set a precedent for what the U.S. and/or other nations can, and should do, when future cases of potential genocide arise. Far too often in the recent past, the international community (the United Nations, individual governments, many nongovernmental…

  4. Variable & Recode Definitions - SEER Documentation

    Science.gov (United States)

    Resources that define variables and provide documentation for reporting using SEER and related datasets. Choose from SEER coding and staging manuals plus instructions for recoding behavior, site, stage, cause of death, insurance, and several additional topics. Also guidance on months survived, calculating Hispanic mortality, and site-specific surgery.

  5. Document Delivery: Evaluating the Options.

    Science.gov (United States)

    Ward, Suzanne M.

    1997-01-01

    Discusses options available to libraries for document delivery. Topics include users' needs; cost; copyright compliance; traditional interlibrary loan; types of suppliers; selection criteria, including customer service; new developments in interlibrary loan, including outsourcing arrangements; and the need to evaluate suppliers. (LRW)

  6. The Digital technical documentation handbook

    CERN Document Server

    Schultz, Susan I; Kavanagh, Frank X; Morse, Marjorie J

    1993-01-01

    The Digital Technical Documentation Handbook describes the process of developing and producing technical user information at Digital Equipment Corporation. * Discusses techniques for making user information _more effective * Covers the draft and reviewprocess, the production and distribution of printed and electronic media, archiving, indexing, testing for usability, and many other topics * Provides quality assurance checklists, contains a glossary and a bibliography of resources for technicalcommunicators

  7. Topology of Document Retrieval Systems.

    Science.gov (United States)

    Everett, Daniel M.; Cater, Steven C.

    1992-01-01

    Explains the use of a topological structure to examine the closeness between documents in retrieval systems and analyzes the topological structure of a vector-space model, a fuzzy-set model, an extended Boolean model, a probabilistic model, and a TIRS (Topological Information Retrieval System) model. Proofs for the results are appended. (17…

  8. Methodological Aspects of Architectural Documentation

    Directory of Open Access Journals (Sweden)

    Arivaldo Amorim

    2011-12-01

    Full Text Available This paper discusses the methodological approach that is being developed in the state of Bahia in Brazil since 2003, in architectural and urban sites documentation, using extensive digital technologies. Bahia has a vast territory with important architectural ensembles ranging from the sixteenth century to present day. As part of this heritage is constructed of raw earth and wood, it is very sensitive to various deleterious agents. It is therefore critical document this collection that is under threats. To conduct those activities diverse digital technologies that could be used in documentation process are being experimented. The task is being developed as an academic research, with few financial resources, by scholarship students and some volunteers. Several technologies are tested ranging from the simplest to the more sophisticated ones, used in the main stages of the documentation project, as follows: work overall planning, data acquisition, processing and management and ultimately, to control and evaluate the work. The activities that motivated this paper are being conducted in the cities of Rio de Contas and Lençóis in the Chapada Diamantina, located at 420 km and 750 km from Salvador respectively, in Cachoeira city at Recôncavo Baiano area, 120 km from Salvador, the capital of Bahia state, and at Pelourinho neighbourhood, located in the historic capital. Part of the material produced can be consulted in the website: < www.lcad.ufba.br>.

  9. Waste Management System Requirements Document

    International Nuclear Information System (INIS)

    1992-02-01

    This DCP establishes an interim plan for the Office of Civilian Radioactive Waste Management (OCRWM) technical baseline until the results of the OCRWM Document Hierarchy Task Force can be implemented. This plan is needed to maintain continuity in the Program for ongoing work in the areas of Waste Acceptance, Transportation, Monitored Retrievable Storage (MRS) and Yucca Mountain Site Characterization

  10. Compression of Probabilistic XML documents

    NARCIS (Netherlands)

    Veldman, Irma

    2009-01-01

    Probabilistic XML (PXML) files resulting from data integration can become extremely large, which is undesired. For XML there are several techniques available to compress the document and since probabilistic XML is in fact (a special form of) XML, it might benefit from these methods even more. In

  11. A methodology for software documentation

    OpenAIRE

    Torres Júnior, Roberto Dias; Ahlert, Hubert

    2000-01-01

    With the growing complexity of window based software and the use of object-oriented, the development of software is getting more complex than ever. Based on that, this article intends to present a methodology for software documentation and to analyze our experience and how this methodology can aid the software maintenance

  12. Is [Rural] Property Tax Relevant?

    OpenAIRE

    Villaveces-Niño, Marta-Juanita

    2015-01-01

    The present document presents the general notions and the definition of property taxation and, as part of it, the working definition of rural property taxation emphasizing that property taxation is a matter of “property” and rural property taxation is linked with rural property, specifically with land ownership. In addition, the document presents some facts about the performance of property taxation based on a secondary source of cross-country analysis. In order to giv...

  13. Automatic classification of journalistic documents on the Internet1

    Directory of Open Access Journals (Sweden)

    Elias OLIVEIRA

    Full Text Available Abstract Online journalism is increasing every day. There are many news agencies, newspapers, and magazines using digital publication in the global network. Documents published online are available to users, who use search engines to find them. In order to deliver documents that are relevant to the search, they must be indexed and classified. Due to the vast number of documents published online every day, a lot of research has been carried out to find ways to facilitate automatic document classification. The objective of the present study is to describe an experimental approach for the automatic classification of journalistic documents published on the Internet using the Vector Space Model for document representation. The model was tested based on a real journalism database, using algorithms that have been widely reported in the literature. This article also describes the metrics used to assess the performance of these algorithms and their required configurations. The results obtained show the efficiency of the method used and justify further research to find ways to facilitate the automatic classification of documents.

  14. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  15. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    L.L. Swanson

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F andOR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of

  16. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Roy, S.

    2004-01-01

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F andOR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures

  17. Areva - 2011 Reference document; Areva - Document de reference 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    After having indicated the person responsible of this document and the legal account auditors, and provided some financial information, this document gives an overview of the different risk factors existing in the company: law risks, industrial and environmental risks, operational risks, risks related to large projects, market and liquidity risks. Then, after having recalled the history and evolution of the company and the evolution of its investments over the last five years, it proposes an overview of Areva's activities on the markets of nuclear energy and renewable energies, of its clients and suppliers, of its strategy, of the activities of its different departments. Other information are provided: company's flow chart, estate properties (plants, equipment), an analysis of its financial situation, its research and development policy, the present context, profit previsions or estimations, management organization and operation

  18. Seeking Relevance: American Political Science and America

    Science.gov (United States)

    Maranto, Robert; Woessner, Matthew C.

    2012-01-01

    In this article, the authors talk about the relevance of American political science and America. Political science has enormous strengths in its highly talented practitioners and sophisticated methods. However, its disconnection from its host society, while not so severe as for fields like English and sociology, nonetheless poses an existential…

  19. Contingent Attentional Capture by Conceptually Relevant Images

    Science.gov (United States)

    Wyble, Brad; Folk, Charles; Potter, Mary C.

    2013-01-01

    Attentional capture is an unintentional shift of visuospatial attention to the location of a distractor that is either highly salient, or relevant to the current task set. The latter situation is referred to as contingent capture, in that the effect is contingent on a match between characteristics of the stimuli and the task-defined…

  20. Exemplary assessment of an entire and high value recovery in a MSWI with special regard on climate relevance; Beispielhafte Darstellung einer vollstaendigen, hochwertigen Verwertung in einer MVA unter besonderer Beruecksichtigung der Klimarelevanz

    Energy Technology Data Exchange (ETDEWEB)

    Fehrenbach, Horst; Giegrich, Juergen; Mahmood, Sameh [ifeu-Institut fuer Energie- und Umweltforschung GmbH, Heidelberg (Germany)

    2007-10-15

    The 'Goal 2020' of German waste management policy defines the entire recycling/recovery of municipal waste and the abandonment of disposal above ground to a great extend. Thus an entire material recycling and re-use also of the MSWI (Municipal Solid Waste Incineration) residuals is required, especially the mass-relevant slag. Apart from the material aspect the energy efficiency issue (actual substitution of primary energy carriers) is another decisive criterion as well as assurance of low pollutant discharge. Screening of all MSWI in Germany in terms of these criteria ends up with rather positive results. A large mass percentage of the mineral residues are yet conveyed to material recycling. According to energy use there is a wide bandwidth from rather high to rather low efficiency. The assessed emission levels again show an overall high standard performance. Four exemplary plants - each representing one of the three criteria in special way plus one low standard reference plant - were assessed by mass flow calculation and evaluating by the indicators CO{sub 2}, NOX, Hg and Cd emissions - caused by the plants and replaced by material and energy substitution. The energy efficiency turns out to the most decisive factor. A rough cost analysis looking at measures for entire recovery shows that cost increase as well as decrease can be figured out depending on basic presumptions. Scenarios for status quo and optimization at national scope were calculated to combine CO{sub 2} balance and costs. It concludes in a potential saving of about 3 million t CO{sub 2}/a, whereas cost won't increase in higher magnitude than preventing landfill costs for slag disposal have saved. (orig.)