WorldWideScience

Sample records for highly active liquid

  1. High-activity liquid packaging design criteria

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    In recent studies, it has been acknowledged that there is an emerging need for packaging to transport high-activity liquid off the Hanford Site to support characterization and process development activities of liquid waste stored in underground tanks. These studies have dealt with specimen testing needs primarily at the Hanford Site; however, similar needs appear to be developing at other US Department of Energy (DOE) sites. The need to ship single and multiple specimens to offsite laboratories is anticipated because it is predicted that onsite laboratories will be overwhelmed by an increasing number and size (volume) of samples. Potentially, the specimen size could range from 250 mL to greater than 50 L. Presently, no certified Type-B packagings are available for transport of high-activity liquid radioactive specimens in sizes to support Site missions.

  2. A high voltage supercapacitor based on ionic liquid with an activated carbon electrode

    Science.gov (United States)

    Pilathottathil, Shabeeba; Thasneema, K. K.; Shahin Thayyil, Mohamed; Pillai, M. P.; Niveditha, C. V.

    2017-07-01

    A symmetric supercapacitor with porous activated carbon as the active material and trihexyl (tetradecyl) phosphonium bis (trifluoromethanesulfonyl) imide [PC6C6C6C14][Tf2N] as the electrolyte was fabricated. Scanning electron microscopy, atomic force microscopy, x-ray diffraction, Fourier transform infrared spectroscopy and a zeta particle size analysis were conducted to examine the surface morphology and other physical properties. Differential scanning calorimetry and a thermal gravimetric analysis were performed to study the thermal stability of the ionic liquid based electrolyte. The binary mixture route was taken with acetonitrile and ionic liquid for reducing the viscosity to enhance the ionic mobility. Cyclic voltammetry, impedance spectroscopy and charge-discharge investigations were conducted to assess the performance of the supercapacitor. A very high specific capacitance of 300 F g-1, an ultra high energy density of 110 Wh kg-1, a high rate scalability (up to 1000 cycles) and an increased operation voltage of 3.5 V were achieved to propose this electrode electrolyte combination as a potential candidate for future ionic liquid based supercapacitor.

  3. High performance liquid chromatography method for the determination of cinnamyl alcohol dehydrogenase activity in soybean roots.

    Science.gov (United States)

    dos Santos, W D; Ferrarese, Maria de Lourdes Lucio; Ferrarese-Filho, O

    2006-01-01

    This study proposes a simple, quick and reliable method for determining the cinnamyl alcohol dehydrogenase (CAD; EC 1.1.1.195) activity in soybean (Glycine max L. Merr.) roots using reversed-phase high performance liquid chromatography (RP-HPLC). The method includes a single extraction of the tissue and conduction of the enzymatic reaction at 30 degrees C with cinnamaldehydes (coniferyl or sinapyl), substrates of CAD. Disappearance of the substrates in the reaction mixture is monitored at 340 nm (for coniferaldehyde) or 345 nm (for sinapaldehyde) by isocratic elution with methanol/acetic acid through a GLC-ODS (M) column. This HPLC technique furnishes a rapid and reliable measure of cinnamaldehyde substrates, and may be used as an alternative tool to analyze CAD activity in enzyme preparation without previous purification.

  4. Simultaneous quantification of five major biologically active ingredients of saffron by high-performance liquid chromatography.

    Science.gov (United States)

    Li, N; Lin, G; Kwan, Y W; Min, Z D

    1999-07-23

    A simple, sensitive and specific high-performance liquid chromatography-UV (HPLC-UV) method has been developed for the first time to simultaneously quantify the five major biologically active ingredients of saffron, namely crocin 1, crocin 2, crocin 3, crocin 4 and crocetin. Calibration curves were derived by spiking authentic compounds and internal standard, 13-cis-retinoic acid, into herbal samples prior to extraction. Extraction was conducted simply by stirring dried herb (20 mg) with 80% aqueous methanol (5 ml) at ambient temperature in the dark for 2 h. The HPLC assay was performed on a reversed-phase C18 column with linear gradient elution using methanol and 1% aqueous acetic acid. Calibrations were linear (r2 = 0.999) for all five analytes, with overall intra- and inter-day RSDs of less than 11%. The assay was successfully applied to the determination of four crocins and crocetin in three saffron samples and two Zhizi, another crocin-containing herb. Results indicate that the developed HPLC assay can be readily utilized as a quality control method for crocin-containing medicinal herbs.

  5. Performance Evaluation of a High Bandwidth Liquid Fuel Modulation Valve for Active Combustion Control

    Science.gov (United States)

    Saus, Joseph R.; DeLaat, John C.; Chang, Clarence T.; Vrnak, Daniel R.

    2012-01-01

    At the NASA Glenn Research Center, a characterization rig was designed and constructed for the purpose of evaluating high bandwidth liquid fuel modulation devices to determine their suitability for active combustion control research. Incorporated into the rig s design are features that approximate conditions similar to those that would be encountered by a candidate device if it were installed on an actual combustion research rig. The characterized dynamic performance measures obtained through testing in the rig are planned to be accurate indicators of expected performance in an actual combustion testing environment. To evaluate how well the characterization rig predicts fuel modulator dynamic performance, characterization rig data was compared with performance data for a fuel modulator candidate when the candidate was in operation during combustion testing. Specifically, the nominal and off-nominal performance data for a magnetostrictive-actuated proportional fuel modulation valve is described. Valve performance data were collected with the characterization rig configured to emulate two different combustion rig fuel feed systems. Fuel mass flows and pressures, fuel feed line lengths, and fuel injector orifice size was approximated in the characterization rig. Valve performance data were also collected with the valve modulating the fuel into the two combustor rigs. Comparison of the predicted and actual valve performance data show that when the valve is operated near its design condition the characterization rig can appropriately predict the installed performance of the valve. Improvements to the characterization rig and accompanying modeling activities are underway to more accurately predict performance, especially for the devices under development to modulate fuel into the much smaller fuel injectors anticipated in future lean-burning low-emissions aircraft engine combustors.

  6. High Performance Liquid Chromatography

    Science.gov (United States)

    Talcott, Stephen

    High performance liquid chromatography (HPLC) has many applications in food chemistry. Food components that have been analyzed with HPLC include organic acids, vitamins, amino acids, sugars, nitrosamines, certain pesticides, metabolites, fatty acids, aflatoxins, pigments, and certain food additives. Unlike gas chromatography, it is not necessary for the compound being analyzed to be volatile. It is necessary, however, for the compounds to have some solubility in the mobile phase. It is important that the solubilized samples for injection be free from all particulate matter, so centrifugation and filtration are common procedures. Also, solid-phase extraction is used commonly in sample preparation to remove interfering compounds from the sample matrix prior to HPLC analysis.

  7. Biocytin synthetase activity in human milk as assessed by high-performance liquid chromatography.

    Science.gov (United States)

    Oizumi, J; Hayakawa, K

    1993-01-29

    A reversed-phase liquid chromatographic assay for biocytin synthetase activity has been developed. By this method, biocytin synthetase, isolated to homogeneity from human milk, was found to synthetize biocytin from biotin and L-lysine in the presence of ATP and magnesium ion(s). Both ATP and magnesium ion(s) were required for the synthesis of biocytin. Equal molar amounts of ADP and ATP were produced and consumed, respectively, in the course of the production of the same molar amount of biocytin; however, production of AMP was not observed. Biocytin synthetase Michaelis constants were 2.5, 1.8, and 0.11 mM for biotin, L-lysine, and ATP, respectively. Biocytin synthetase from milk was shown to synthesize biocytin in a stoichiometric amount.

  8. Continuous liquid fermentation of pretreated waste activated sludge for high rate volatile fatty acids production and online nutrients recovery.

    Science.gov (United States)

    Zhang, Lihui; Liu, He; Zheng, Zhiyong; Ma, Huijun; Yang, Meng; Liu, Hongbo

    2017-11-04

    Raw sludge was pretreated, and the separated sludge liquid was used as substrate in a continuous operated up-flow anaerobic sludge blanket reactor to produce volatile fatty acids (VFAs). The highest VFA productivity of continuous fermentation with sludge liquid at an organic loading rate (OLR) of 10.0 kg COD/m3/d was about 5.0-fold and 4.0-fold higher than batch and semi-continuous fermentation with pretreated sludge slurry, respectively. Moreover, the liquid fermentation with an OLR of 10.0 kg COD/m3/d consumed the least energy, which was about 10.57% and 12.12% of batch and semi-continuous sludge fermentation, respectively. When combined with online nitrogen and phosphorus recovery, VFA production further increased by 20.67% and struvite recovery efficiency reached 1.98  ±  0.28 g/g PO43-. The process showed high VFA production, low energy consumption and good nutrients recovery by continuous liquid anaerobic fermentation, significantly increasing the economic potential of VFA production from waste activated sludge. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Highly Swellable, Dual-Responsive Hydrogels Based on PNIPAM and Redox Active Poly(ferrocenylsilane) Poly(ionic liquid)s: Synthesis, Structure, and Properties

    NARCIS (Netherlands)

    Feng, Xueling; Zhang, Kaihuan; Chen, Peng; Sui, Xiaofeng; Hempenius, Mark A.; Liedberg, Bo; Vancso, Gyula J.

    2016-01-01

    Highly swellable, dual-responsive hydrogels, consisting of thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) and redox-responsive poly(ferrocenylsilane) (PFS) based poly(ionic liquid)s (PILs) are formed by photo-polymerization. PFS chains bearing cross-linkable vinylimidazolium (VIm) side

  10. Highly Swellable, Dual-Responsive Hydrogels Based on PNIPAM and Redox Active Poly(ferrocenylsilane) Poly(ionic liquid)s : Synthesis, Structure, and Properties

    NARCIS (Netherlands)

    Feng, Xueling; Zhang, Kaihuan; Chen, Peng; Sui, Xiaofeng; Hempenius, Mark A.; Liedberg, Bo; Vancso, Gyula J.

    2016-01-01

    Highly swellable, dual-responsive hydrogels, consisting of thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) and redox-responsive poly(ferrocenylsilane) (PFS) based poly(ionic liquid)s (PILs) are formed by photo-polymerization. PFS chains bearing cross-linkable vinylimidazolium (VIm) side

  11. [Analysis of surface-active substances in Sapindus mukurossi by high performance liquid chromatography-mass spectrometry].

    Science.gov (United States)

    Wang, X C

    2001-11-01

    A high performance liquid chromatography-atmospheric pressure ionization mass spectrometry method has been developed for the analysis of surface-active substances (hederagenin saponins and sesquiterpene oligoglycosides) in the extracts of the pericarp of Sapindus mukurossi. The method consists of the separation of surface-active substances using C18 HPLC column, followed by detection using a diode-array detector at 210 nm and then on-line mass spectrometry. Hederagenin saponins and sesquiterpene oligoglycosides were characterized as [M - H]- or [M + Na]+. Based on the relative molecular mass, established by mass spectrometry and the structure induced by in-source CID technology, three components that had not been reported in Sapindus mukurossi before were identified. Several surface-active substances were obtained by means of semi-preparative HPLC. Their structures were further confirmed by NMR spectrometry as mukurozi-saponin Y2, mukurozi-saponin X, mukurozioside I a and mukurozioside II a.

  12. A Facile Ionic Liquid Promoted Synthesis, Cholinesterase Inhibitory Activity and Molecular Modeling Study of Novel Highly Functionalized Spiropyrrolidines

    Directory of Open Access Journals (Sweden)

    Abdulrahman I. Almansour

    2015-01-01

    Full Text Available A series of novel dimethoxyindanone embedded spiropyrrolidines were synthesized in ionic liquid, [bmim]Br and were evaluated for their inhibitory activities towards cholinesterases. Among the spiropyrrolidines, compound 4f exhibited the most potent activity with an IC50 value of 1.57 µM against acethylcholinesterase (AChE. Molecular docking simulation for the most active compound was employed with the aim of disclosing its binding mechanism to the active site of AChE receptor.

  13. A facile ionic liquid promoted synthesis, cholinesterase inhibitory activity and molecular modeling study of novel highly functionalized spiropyrrolidines.

    Science.gov (United States)

    Almansour, Abdulrahman I; Kumar, Raju Suresh; Arumugam, Natarajan; Basiri, Alireza; Kia, Yalda; Ali, Mohamed Ashraf; Farooq, Mehvish; Murugaiyah, Vikneswaran

    2015-01-29

    A series of novel dimethoxyindanone embedded spiropyrrolidines were synthesized in ionic liquid, [bmim]Br and were evaluated for their inhibitory activities towards cholinesterases. Among the spiropyrrolidines, compound 4f exhibited the most potent activity with an IC50 value of 1.57 µM against acethylcholinesterase (AChE). Molecular docking simulation for the most active compound was employed with the aim of disclosing its binding mechanism to the active site of AChE receptor.

  14. Highly Active Liquid Waste concentration using the formaldehyde de-nitration process in the French reprocessing plants

    Energy Technology Data Exchange (ETDEWEB)

    Bretault, P.; Schneider, J. [AREVA-SGN, 1 Rue des Herons, Montigny le Bretonneux Cedex, 78182 (France); Huel, C.; Bosse, E. [AREVA-NC (France); Juvenelle, A.; Masson, M. [Commissariat a l' Energie Atomique - CEA (France)

    2009-06-15

    The Highly Active Liquid Waste generated by a spent nuclear fuel reprocessing plant is mainly composed of the raffinate from the first stage of the uranium/plutonium extraction process. This stream contains the vast majority of the fission products and minor actinides which are finally vitrified. The HALW stream is concentrated in order to limit the volume of the interim storage between the extraction process and the vitrification and also to reduce the required evaporation duty of the vitrification process itself. The potential difficulties of this concentration step are the corrosion risk associated to the handling of acidic solution and the possible troubles linked to the formation and precipitation of solid particles. In addition, a highly robust design is a key demand for such high active processes since absolutely no direct maintenance operation will ever be possible after the active commissioning. In La Hague plant operated by AREVA NC the HALW are concentrated using the formaldehyde de-nitration process that was first used at the end of the 50's in the former Marcoule plant. The principle of the process is as follows: - The HALW are concentrated in a kettle type evaporator operated at constant level in a semi-continuous mode, - All along the evaporation sequence, the nitric acid contained in the waste is reduced into nitrous fumes by reaction with formaldehyde. This maintains the free acidity of the concentrate close to 2.5 N, a sufficiently low value to reduce the corrosion risk while minimizing the precipitation of solid compounds, - The nitrous fumes are recombined into nitric which is further purified, concentrated and eventually recycled into the highly active part of the main process. This paper describes with more details the chemical reactions involved, the equipment used and the operating mode of the de-nitration process. It also gives an overview of the 50-years-long operating experience in terms of equipment lifetime, process efficiency and

  15. Radiochemical assay for determination of dihydropyrimidinase activity using reversed-phase high-performance liquid chromatography

    NARCIS (Netherlands)

    van Kuilenburg, A. B.; van Lenthe, H.; van Gennip, A. H.

    1999-01-01

    A radiochemical assay was developed to measure the activity of dihydropyrimidinase (DHP) in human liver homogenates. The method is based on the separation of radiolabeled dihydrouracil from N-carbamyl-beta-alanine by HPLC with on-line detection of radioactivity combined with detection of 14CO2 by

  16. Antimicrobial activity of coconut shell liquid smoke

    Science.gov (United States)

    Kailaku, SI; Syakir, M.; Mulyawanti, I.; Syah, ANA

    2017-06-01

    Coconut shell liquid smoke is produced from the pyrolysis and condensation of smoke from the burning process of coconut shell. It is known to have considerably high content of polyphenol. Beside acting as antioxidant, polyphenol is also a good antimicrobial. This research was conducted in order to study the antimicrobial activity of coconut shell liquid smoke. Coconut shell liquid smoke used in this study was produced from three different processing stages, which obtained three different grades of liquid smoke (grade 1, 2 and 3). Each sample of coconut shell liquid smoke was extracted using ethyl alcohol and petroleum ether. The extract was then analyzed for its antimicrobial activity against S. aereus, E. coli and C. albicans using well diffusion method. Total phenol and microbial microscopic structure of the liquid smoke were also examined. The results showed that there was influence of coconut shell liquid smoke on the inhibition of S. aureus, E. coli and C. albican growth. This fact was marked by the forming of clear area surrounding the well on the dish agar media. The highest percentage of inhibition showed by the extract of grade 3 coconut shell liquid smoke. This may be explained by the highest total phenol content in grade 3 liquid smoke. Microscopic examination showed that there was a breakage of microbial cell walls caused by the antimicrobial property of the liquid smoke. It was concluded that coconut shell liquid smoke was beneficial as antimicrobial agent, and while all grades of liquid smoke contains polyphenol, the content was influenced by the processing stage and thus influenced its level of microbial growth inhibition.

  17. Hyperthermostable Thermotoga maritima xylanase XYN10B shows high activity at high temperatures in the presence of biomass-dissolving hydrophilic ionic liquids.

    Science.gov (United States)

    Yu, Tianyi; Anbarasan, Sasikala; Wang, Yawei; Telli, Kübra; Aslan, Aşkın Sevinç; Su, Zhengding; Zhou, Yin; Zhang, Li; Iivonen, Piia; Havukainen, Sami; Mentunen, Tero; Hummel, Michael; Sixta, Herbert; Binay, Baris; Turunen, Ossi; Xiong, Hairong

    2016-07-01

    The gene of Thermotoga maritima GH10 xylanase (TmXYN10B) was synthesised to study the extreme limits of this hyperthermostable enzyme at high temperatures in the presence of biomass-dissolving hydrophilic ionic liquids (ILs). TmXYN10B expressed from Pichia pastoris showed maximal activity at 100 °C and retained 92 % of maximal activity at 105 °C in a 30-min assay. Although the temperature optimum of activity was lowered by 1-ethyl-3-methylimidazolium acetate ([EMIM]OAc), TmXYN10B retained partial activity in 15-35 % hydrophilic ILs, even at 75-90 °C. TmXYN10B retained over 80 % of its activity at 90 °C in 15 % [EMIM]OAc and 15-25 % 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM]DMP) during 22-h reactions. [EMIM]OAc may rigidify the enzyme and lower V max. However, only minor changes in kinetic parameter K m showed that competitive inhibition by [EMIM]OAc of TmXYN10B is minimal. In conclusion, when extended enzymatic reactions under extreme conditions are required, TmXYN10B shows extraordinary potential.

  18. α-Fe2O3 cubes with high visible-light-activated photoelectrochemical activity towards glucose: hydrothermal synthesis assisted by a hydrophobic ionic liquid.

    Science.gov (United States)

    Xu, Li; Xia, Jiexiang; Wang, Leigang; Qian, Jing; Li, Huaming; Wang, Kun; Sun, Kaiyong; He, Minqiang

    2014-02-17

    A liquid/liquid interfacial reaction system was designed to fabricate α-Fe2O3 cubes. The reaction system uses a hydrophobic ionic liquid containing iron ions ([(C8H17)2(CH3)2N]FeCl4) for manufacturing α-Fe2O3 cubes by a novel and environmentally friendly hydrothermal method under low-temperature conditions (140 °C). The iron-containing ionic liquid is hydrophobic and can form a liquid/liquid interface with water, which is vital for fabrication of the α-Fe2O3 cubes. Nanomaterials synthesized from hydrophobic iron-containing ionic liquids show good crystallinity, well-developed morphology, and uniform size. The effect of different ionic liquids on the morphology of α-Fe2 O3 was investigated in detail. [(C8H17)2(CH3)2N]FeCl4 is assumed to perform the triple role of forming a liquid/liquid interface with water and acting as reactant and template at the same time. The effect of the reaction temperature on the formation of the α-Fe2O3 cubes was also studied. Temperatures lower or higher than 140 °C are not conducive to formation of the α-Fe2O3 cubes. Their photoelectrochemical properties were tested by means of the transient photocurrent response of electrodes modified with as-prepared α-Fe2O3 cubes. The photocurrent response of an α-Fe2O3 cubes/indium tin oxide electrode is high and stable, and it shows great promise as a photoelectrochemical glucose sensor with high sensitivity and fast response, which are beneficial to practical applications of nanosensors. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Depth Gauge for Liquids Under High Pressure

    Science.gov (United States)

    Zuckerwar, A. J.; Mazel, D. S.

    1987-01-01

    Piezoelectric element mounted in hole drilled in high-pressure plug. Transducer used to measure depth of liquid when pressure in vessel high. New configuration transmits ultrasonic vibration directly into liquid, enhancing signal strength, accuracy, and range, yet piezoelectric element protected from high-pressure liquid.

  20. Electrocatalytic CO2 Reduction with a Homogeneous Catalyst in Ionic Liquid: High Catalytic Activity at Low Overpotential.

    Science.gov (United States)

    Grills, David C; Matsubara, Yasuo; Kuwahara, Yutaka; Golisz, Suzanne R; Kurtz, Daniel A; Mello, Barbara A

    2014-06-05

    We describe a new strategy for enhancing the efficiency of electrocatalytic CO2 reduction with a homogeneous catalyst, using a room-temperature ionic liquid as both the solvent and electrolyte. The electrochemical behavior of fac-ReCl(2,2'-bipyridine)(CO)3 in neat 1-ethyl-3-methylimidazolium tetracyanoborate ([emim][TCB]) was compared with that in acetonitrile containing 0.1 M [Bu4N][PF6]. Two separate one-electron reductions occur in acetonitrile (-1.74 and -2.11 V vs Fc(+/0)), with a modest catalytic current appearing at the second reduction wave under CO2. However, in [emim][TCB], a two-electron reduction wave appears at -1.66 V, resulting in a ∼0.45 V lower overpotential for catalytic reduction of CO2 to CO. Furthermore, the apparent CO2 reduction rate constant, kapp, in [emim][TCB] exceeds that in acetonitrile by over one order of magnitude (kapp = 4000 vs 100 M(-1) s(-1)) at 25 ± 3 °C. Supported by time-resolved infrared measurements, a mechanism is proposed in which an interaction between [emim](+) and the two-electron reduced catalyst results in rapid dissociation of chloride and a decrease in the activation energy for CO2 reduction.

  1. Active chemisorption sites in functionalized ionic liquids for carbon capture.

    Science.gov (United States)

    Cui, Guokai; Wang, Jianji; Zhang, Suojiang

    2016-07-25

    Development of novel technologies for the efficient and reversible capture of CO2 is highly desired. In the last decade, CO2 capture using ionic liquids has attracted intensive attention from both academia and industry, and has been recognized as a very promising technology. Recently, a new approach has been developed for highly efficient capture of CO2 by site-containing ionic liquids through chemical interaction. This perspective review focuses on the recent advances in the chemical absorption of CO2 using site-containing ionic liquids, such as amino-based ionic liquids, azolate ionic liquids, phenolate ionic liquids, dual-functionalized ionic liquids, pyridine-containing ionic liquids and so on. Other site-containing liquid absorbents such as amine-based solutions, switchable solvents, and functionalized ionic liquid-amine blends are also investigated. Strategies have been discussed for how to activate the existent reactive sites and develop novel reactive sites by physical and chemical methods to enhance CO2 absorption capacity and reduce absorption enthalpy. The carbon capture mechanisms of these site-containing liquid absorbents are also presented. Particular attention has been paid to the latest progress in CO2 capture in multiple-site interactions by amino-free anion-functionalized ionic liquids. In the last section, future directions and prospects for carbon capture by site-containing ionic liquids are outlined.

  2. Characterization and use of high surface area activated carbons prepared from cane pith for liquid-phase adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Tseng, R.-L. [Graduate Institute of Environmental Engineering, National Taiwan University, Taiwan (China) and Department of Safety, Health and Environmental Engineering, National United University, Miao-Li 360, Taiwan (China)]. E-mail: trl@nuu.edu.tw; Tseng, S.-K. [Graduate Institute of Environmental Engineering, National Taiwan University, Taiwan (China)

    2006-08-25

    Carbonaceous adsorbents with controllable surface areas were chemically activated with KOH at 780 deg. C from char that had been carbonized from cane pith at 450 deg. C. The pore properties including the BET surface area, pore volume, pore size distribution, and mean pore diameter of these activated carbons were characterized and derived using the t-plot method based on N{sub 2} adsorption isotherms. The activated cane pith carbons, with KOH/char ratios of 2-6, exhibited BET surface areas ranging from 912 to 2299 m{sup 2} g{sup -1}. The scanning electron microscopic (SEM) observations revealed that the surface morphology of honeycombed holes on all activated cane pith carbons was significantly influenced by the KOH/char ratio. The adsorption kinetics and equilibrium isotherms of acid blue 74, methylene blue, basic brown 1, p-nitrophenol, p-chlorophenol, p-cresol, and phenol from water at 30 deg. C on the activated carbons were studied. The adsorption kinetics were suitably described by a simplified kinetic model, the Elovich equation. All adsorption equilibrium isotherms were in agreement with the Langmuir equation, and were used to compare the covered area (S {sub c}/S {sub p}) of the activated carbons at different KOH/char ratios. The high-surface-area activated carbons were proven to be promising adsorbents for pollution control and for other applications.

  3. Kinetic study of a highly active MgCl2-supported Ziegler-Natta catalyst in liquid pool propylene polymerization. II. The influence of alkyl aluminum and alkoxysilane on catalyst activation and deactivation

    NARCIS (Netherlands)

    Shimizu, Fumihiko; Pater, J.T.M.; van Swaaij, Willibrordus Petrus Maria; Weickert, G.

    2001-01-01

    The influence of alkyl aluminum and alkoxysilane on the kinetics in liquid pool propylene batch polymerization was investigated with a highly active Ziegler-Natta catalyst system that consisted of MgCl2/TiCl4/diester-alkoxysilane/AlR3. In this study, diethyl phthalate and t-BuEtSi(OMe)2 were used as

  4. Highly durable, biomimetic electro-active paper actuator based on cellulose polypyrrole-ionic liquid (CPIL) nanocomposite.

    Science.gov (United States)

    Mahadeva, Suresha K; Yun, Kiju; Kim, Jaehwan; Kim, Joo-Hyung

    2011-01-01

    Cellulose has received much attention as a emerging smart material, named as electro-active paper (EAPap), which can produce a large bending displacement with applied external electrical field. In spite of many advantages over other reported electro active polymers, there are some issues to be addressed: its actuator performance: (i) sensitive to environmental humidity, (ii) humidity dependent displacement output of the actuator and (iii) degradation of performance with time. In present paper, we have successfully developed the highly durable EAPap actuator working at ambient condition with large displacement output. To improve the performance and durability of EAPap, nanoscaled PPy layer into cellulose EAPap was formed by in-situ polymerization technique. Cellulose-PPy-IL nanocomposite based EAPap actuator showed nearly 100% improvement of the actuator performance compared that of pure cellulose based EAPap actuator systems.

  5. Determination of catechol-O-methyltransferase activity in brain tissue by high-performance liquid chromatography with on-line radiochemical detection

    Energy Technology Data Exchange (ETDEWEB)

    Nissinen, E.

    1985-01-01

    A sensitive assay for catechol-O-methyltransferase (COMT) activity by high-performance liquid chromatography with on-line radiochemical detection was described. The method was based on the measurement of /sup 3/H- labeled 3-O- and 4-O-methylated products of the substrate, 3,4- dihydroxybenzoic acid, using S-adenosyl-L-(methyl-/sup 3/H)methionine as the methyl donor, or the measurement of /sup 14/C-labeled 3-O- and 4-O-methylated products of the substrate, (7-/sup 14/C)dopamine. The reaction products were determined from the incubation mixture after removal of protein by injecting an aliquot into the liquid chromatograph. The detection limit with counting efficiency of 40% was 0.45 pmol /sup 3/H-labeled product, and 0. 04 pmol /sup 14/C-labeled product with 61% counting efficiency. The method is suitable for assaying membrane-bound and soluble COMT activities in the brain tissue and for calculation of meta/para product ratios.

  6. Surface nanodroplets for highly efficient liquid-liquid microextraction

    Science.gov (United States)

    Li, Miaosi; Lu, Ziyang; Yu, Haitao; Zhang, Xuehua

    2016-11-01

    Nanoscale droplets on a substrate are an essential element for a wide range of applications, such as laboratory-on-chip devices, simple and highly efficient miniaturized reactors for concentrating products, high-throughput single-bacteria or single-biomolecular analysis, encapsulation, and high-resolution imaging techniques. The solvent exchange process is a simple bottom-up approach for producing droplets at solid-liquid interfaces that are only several tens to hundreds of nanometers in height, or a few femtoliters in volume Oil nanodroplets can be produced on a substrate by solvent exchange in which a good solvent of oil is displaced by a poor solvent. Our previous work has significantly advanced understanding of the principle of solvent exchange, and the droplet size can be well-controlled by several parameters, including flow rates, flow geometry, gravitational effect and composition of solutions. In this work, we studied the microextraction effect of surface nanodroplets. Oil nanodroplets have been demonstrated to provide highly-efficient liquid-liquid microextraction of hydrophobic solute in a highly diluted solution. This effect proved the feasibility of nanodroplets as a platform for preconcentrating compounds for in situ highly sensitive microanalysis without further separation. Also the long lifetime and temporal stability of surface nanodroplets allow for some long-term extraction process and extraction without addition of stabilisers.

  7. High Performance Liquid Chromatography Method for the ...

    African Journals Online (AJOL)

    High Performance Liquid Chromatography Method for the Determination of Anethole in Rat Plasma. ... Journal Home > Vol 13, No 5 (2014) > ... Results: GC determination showed that anethole in the essential oil of star anise exhibited a ...

  8. The simultaneous determination of active ingredients in cough-cold mixtures by isocratic reversed-phase ion-pair high-performance liquid chromatography.

    Science.gov (United States)

    Lau, O W; Chan, K; Lau, Y K; Wong, W C

    1989-01-01

    A simple, rapid and accurate method for the simultaneous determination of active ingredients in cough-cold mixtures using isocratic reversed-phase ion-pair high-performance liquid chromatography has been developed. It involves the use of an octadecylsilane column as the stationary phase with methanol, water, tetrahydrofuran, phosphoric acid mixtures as mobile phase including sodium dioctylsulphosuccinate as the ion-pair agent. The pH of the mobile phase was adjusted to 4.6 by means of phosphoric acid and ammonium hydroxide solutions. The proposed method involves the simple dilution of the samples with the mobile phase and the addition of metoclopramide hydrochloride as the internal standard. The active ingredients under investigation were chlorpheniramine, codeine, diphenhydramine, ephedrine, ethylmorphine, phenylephrine, phenylpropanolamine and pholcodine, which exist as various combinations in cough-cold mixtures. The optimum composition of the mobile phase and the optimum flow rate were determined and are reported. The method was applied to the determination of active ingredients in seven commercially available cough-cold mixtures.

  9. High-performance liquid chromatography method with radiochemical detection for measurement of nitric oxide synthase, arginase, and arginine decarboxylase activities

    DEFF Research Database (Denmark)

    Volke, A; Wegener, Gregers; Vasar, E

    2006-01-01

    regulate NOS activity. We aimed to develop a HPLC-based method to measure simultaneously the products of these three enzymes. Traditionally, the separation of amino acids and related compounds with HPLC has been carried out with precolumn derivatization and reverse phase chromatography. We describe here...... a simple and fast HPLC method with radiochemical detection to separate radiolabeled L-arginine, L-citrulline, L-ornithine, and agmatine. 3H-labeled L-arginine, L-citrulline, agmatine, and 14C-labeled L-citrulline were used as standards. These compounds were separated in the normal phase column (Allure...... Acidix 250 x 4.6 mm i.d.) under isocratic conditions in less than 20 min with good sensitivity. Using the current method, we have shown the formation of L-citrulline and L-ornithine in vitro using brain tissue homogenate of rats and that of agmatine by Escherichia coli ADC. Udgivelsesdato: null-null...

  10. Determination of methylmalonyl coenzyme A by ultra high-performance liquid chromatography tandem mass spectrometry for measuring propionyl coenzyme A carboxylase activity in patients with propionic acidemia.

    Science.gov (United States)

    Gotoh, Kana; Nakajima, Yoko; Tajima, Go; Watanabe, Yoriko; Hotta, Yuji; Kataoka, Tomoya; Kawade, Yoshihiro; Sugiyama, Naruji; Ito, Tetsuya; Kimura, Kazunori; Maeda, Yasuhiro

    2017-03-01

    Propionic acidemia (PA) is an inherited metabolic disease caused by low activity of propionyl coenzyme A (CoA) carboxylase (PCC), which metabolizes propionyl-CoA into methylmalonyl-CoA. Although many patients with PA have been identified by tandem mass spectrometry since the test was first included in neonatal mass screening in the 1990s, the disease severity varies. Thus, determining the specific level of PCC activity is considered to be helpful to grasp the severity of PA. We developed a new PCC assay method by the determination of methylmalonyl-CoA, which is formed by an enzyme reaction using peripheral lymphocytes, based on ultra high-performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS). With methylmalonyl-CoA concentrations of 0.05, 0.5, and 5μmol/L, the intra-assay coefficients of variation (CVs) were 8.2%, 8.7%, and 5.1%, respectively, and the inter-assay CVs were 13.6%, 10.5%, and 5.9%, respectively. The PCC activities of 20 healthy individuals and 6 PA patients were investigated with this assay. Methylmalonyl-CoA was not detected in one PA patient with a severe form of the disease, but the remaining PA patients with mild disease showed residual activities (3.3-7.8%). These results demonstrate that determination of PCC activity with this assay would be useful to distinguish between mild and severe cases of PA to help choose an appropriate treatment plan. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Simultaneous quantification of 25 active constituents in the total flavonoids extract from Herba Desmodii Styracifolii by high-performance liquid chromatography with electrospray ionization tandem mass spectrometry.

    Science.gov (United States)

    Guo, Panpan; Yan, Wenying; Han, Qingjie; Wang, Chunying; Zhang, Zijian

    2015-04-01

    A sensitive and selective high-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry method has been developed and validated for the simultaneous determination of 25 active constituents, including 21 flavonoids and four phenolic acids in the total flavonoids extract from Herba Desmodii Styracifolii for the first time. Among the 25 compounds, seven compounds including caffeic acid, acacetin, genistein, genistin, diosmetin, diosmin and hesperidin were identified and quantified for the first time in Herba Desmodii Styracifolii. Chromatographic separation was accomplished on a ZORBAX SB-C18 (250 mm×4.6 mm, 5.0 μm) column using gradient elution of methanol and 0.1‰ acetic acid v/v at a flow rate of 1.0 mL/min. The identification and quantification of the analytes were achieved using negative electrospray ionization mass spectrometry in multiple-reaction monitoring mode. The method was fully validated in terms of limits of detection and quantification, linearity, precision and accuracy. The results indicated that the developed method is simple, rapid, specific and reliable. Furthermore, the developed method was successfully applied to quantify the 25 active components in six batches of total flavonoids extract from Herba Desmodii Styracifolii. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. High-throughput liquid-liquid extraction in 96-well format: Parallel artificial liquid membrane extraction

    DEFF Research Database (Denmark)

    Gjelstad, Astrid; Andresen, Alf Terje; Dahlgren, Anders

    2017-01-01

    Parallel artificial liquid membrane extraction (PALME) is a miniaturized version of liquid–liquid extraction (LLE) and is based on two 96-well plates in a sandwich-like configuration. With a very simple workflow, 96 samples can be processed simultaneously in PALME, providing analyte enrichment......, highly efficient sample cleanup, and direct compatibility with liquid chromatography–mass spectrometry (LC–MS). The consumption of hazardous organic solvents is also almost eliminated using PALME as the sample preparation technique. This article summarizes current experiences with PALME, based on work...

  13. Liquid chromatography - high resolution mass spectrometry-based metabolomic approach for the detection of Continuous Erythropoiesis Receptor Activator effects in horse doping control.

    Science.gov (United States)

    Joré, Céline; Loup, Benoît; Garcia, Patrice; Paris, Anne-Christelle; Popot, Marie-Agnès; Audran, Michel; Bonnaire, Yves; Varlet-Marie, Emmanuelle; Bailly-Chouriberry, Ludovic

    2017-10-27

    Erythropoiesis Stimulating Agents (ESAs) were developed for therapeutic purposes to stimulate red blood cell (RBC) production. Consequently, tissue oxygenation is enhanced as athlete's endurance and ESAs misuse now benefits doping. Our hypothesis is that most of ESAs should have similar mechanisms and thus have the same effects on metabolism. Studying the metabolome variations could allow suspecting the use of any ESAs with a single method by targeting their effects. In this objective, a metabolomic study was carried out on 3 thoroughbred horses with a single administration of 4.2μg/kg of Mircera(®), also called Continuous Erythropoiesis Receptor Activator (CERA). Blood and urine samples were collected from D-17 to D+74 and haematological parameters were followed throughout the study as plasmatic CERA concentration (ELISA). Urine and plasma metabolic fingerprints were recorded by Liquid Chromatography coupled to High Resolution Mass Spectrometry (LC-HRMS) in positive and negative mode. After preprocessing steps, normalized data were analyzed by multivariate statistics to build OPLS models. Hemoglobin concentration and hematocrit showed a significant increase after CERA administration unlike reticulocytes. CERA concentration showed a high intensity peak and then a slow decrease until becoming undetectable after D+31. Models built with multivariate statistics allow a discrimination between pre and post-administration plasma and urine samples until 74days after administration, i.e. 43days longer than ELISA method. By reducing and studying variables (ions), some potential candidate biomarkers were found. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Implementation of Isavuconazole in a Fluorescence-Based High-Performance Liquid Chromatography Kit Allowing Simultaneous Detection of All Four Currently Licensed Mold-Active Triazoles

    DEFF Research Database (Denmark)

    Jorgensen, Rene; Andersen, Siri Rytcher; Astvad, Karen Marie Thyssen

    2017-01-01

    . The method involves using a kit from ChromSystems intended for TDM of itraconazole (ITZ), posaconazole (PSZ), and voriconazole (VRZ) in serum/plasma for sample preparation and high-performance liquid chromatography, using fluorescence detection with emission and excitation wavelengths set to 261 and 366 nm...

  15. Combined fibroblast growth factor receptor 4 cell membrane chromatography online with high performance liquid chromatography/mass spectrometry to screen active compounds in Brassica albla.

    Science.gov (United States)

    Zhang, Tao; Han, Shengli; Huang, Jing; Wang, Sicen

    2013-01-01

    We investigated an analytical method for the recognition separation, and identification of active components from the traditional Chinese medicinal plant Brassica albla L. using fibroblast growth factor receptor 4 cell membrane chromatography (FGFR4/CMC) with high performance liquid chromatography/mass spectrometry (HPLC/MS). HEK293-FGFR4 cells were obtained by stable transfection of the HEK293 cell line with pcDNA3.1 vector containing the FGFR4 gene. Crude extracts of B. albla L. were firstly subjected to FGFR4/CMC column, and the retain contents on the FGFR4/CMC column were then transferred and enriched using a pre-column, and a ten port column switcher were used between FGFR4/CMC column and HPLC. The retained components on FGFR4/CMC column were then directly delivered to the HPLC/MS system for separation and identification. Gefitinib, nicotine, atenolol, and nimodipine were used in order to verify FGFR4/CMC-HPLC/MS system specificity. Subsequently, we investigated the reproducibility and reliability of the FGFR4/CMC-HPLC/MS system. Finally, sinapine was identified as an active component of B. albla L. The MTT colorimetric assay revealed sinapine could inhibit the proliferation of HEK293-FGFR4 cells with dose dependence. Competitive displacement assay approved getitinib could occupy binding site of sinapine with competition way. And FleX dock simulation further exhibited sinapine and gefitinib could bind with the FGFR4 tyrosine active domain. Thus, sinapine is a potential tumor antagonist that acts on the tyrosine kinase domain. Copyright © 2012 Elsevier B.V. All rights reserved.

  16. Optimization and validation of high performance liquid ...

    African Journals Online (AJOL)

    Optimization and validation of high performance liquid chromatography-ultra violet method for quantitation of metoprolol in rabbit plasma: application to ... Methods: Mobile phase of methanol and 50 mM ammonium dihydrogen phosphate solution (50:50) at pH 3.05 was used for separation of metoprolol on BDS hypersil ...

  17. determined by high perforiviance liquid chromatography

    African Journals Online (AJOL)

    ABSTRACT. The loss oi" L-ascorbic acid (L-AA) in 14 different cooketi local vegetables found in. Nairobi markets was determined by high performance liquid chromatography. The efifect of quantity of water on the loss of L-AA during cooking was studied with cowpea leaves. It, was found that more. L~AA was lost when ...

  18. Gradient High Performance Liquid Chromatography Method ...

    African Journals Online (AJOL)

    Purpose: To develop a gradient high performance liquid chromatography (HPLC) method for the simultaneous determination of phenylephrine (PHE) and ibuprofen (IBU) in solid dosage form. Methods: HPLC determination was carried out on an Agilent XDB C-18 column (4.6 x 150mm, 5 μ particle size) with a gradient ...

  19. High Performance Liquid Chromatographic Determination of ...

    African Journals Online (AJOL)

    Purpose: To develop a simple, precise and rapid high-performance liquid chromatographic technique coupled with photodiode array detection (DAD) method for the simultaneous determination of rutin, quercetin, luteolin, genistein, galangin and curcumin in propolis. Methods: Ultrasound-assisted extraction was applied to ...

  20. Rapid high performance liquid chromatographic determination of ...

    African Journals Online (AJOL)

    Rapid high performance liquid chromatographic determination of chlorpropamide in human plasma. MTB Odunola, IS Enemali, M Garba, OO Obodozie. Abstract. Samples were extracted with dichloromethane and the organic layer evaporated to dryness. The residue was dissolved in methanol, and 25 ìl aliquot injected ...

  1. High Voltage in Noble Liquids for High Energy Physics

    Energy Technology Data Exchange (ETDEWEB)

    Rebel, B. [Fermilab; Bernard, E. [Yale U.; Faham, C. H. [LBL, Berkeley; Ito, T. M. [Los Alamos; Lundberg, B. [Maryland U.; Messina, M. [Columbia U.; Monrabal, F. [Valencia U., IFIC; Pereverzev, S. P. [LLNL, Livermore; Resnati, F. [Zurich, ETH; Rowson, P. C. [SLAC; Soderberg, M. [Fermilab; Strauss, T. [Bern U.; Tomas, A. [Imperial Coll., London; Va' vra, J. [SLAC; Wang, H. [UCLA

    2014-08-22

    A workshop was held at Fermilab November 8-9, 2013 to discuss the challenges of using high voltage in noble liquids. The participants spanned the fields of neutrino, dark matter, and electric dipole moment physics. All presentations at the workshop were made in plenary sessions. This document summarizes the experiences and lessons learned from experiments in these fields at developing high voltage systems in noble liquids.

  2. Novel developments in hydrogen storage, hydrogen activation and ionic liquids

    Energy Technology Data Exchange (ETDEWEB)

    Doroodian, Amir

    2010-12-03

    This dissertation is divided into three chapters. Recently, metal-free hydrogen activation using phosphorous compounds has been reported in science magazine. We have investigated the interaction between hydrogen and phosphorous compounds in presence of strong Lewis acids (chapter one). A new generation of metal-free hydrogen activation, using amines and strong Lewis acids with sterically demanding nature, was already developed in our group. Shortage of high storage capacity using large substitution to improve sterical effect led us to explore the amine borane derivatives, which are explained in chapter two. Due to the high storage capacity of hydrogen in aminoborane derivatives, we have explored these materials to extend hydrogen release. These compounds store hydrogen as proton and hydride on adjacent atoms or ions. These investigations resulted in developing hydrogen storage based on ionic liquids containing methyl guanidinium cation. Then we have continued to develop ionic liquids based on methyl guanidinium cation with different anions, such as tetrafluoro borate (chapter three). We have replaced these anions with transition metal anions to investigate hydrogen bonding and catalytic activity of ionic liquids. This chapter illustrates the world of ionic liquid as a green solvent for organic, inorganic and catalytic reactions and combines the concept of catalysts and solvents based on ionic liquids. The catalytic activity is investigated particularly with respect to the interaction with CO{sub 2}. (orig.)

  3. The high performance liquid chromatography (HPLC) analysis of ...

    African Journals Online (AJOL)

    The high performance liquid chromatography (HPLC) analysis of ultraviolet (UV) irradiated chlorophyll a and secondary plant compounds. ... in all the samples leaving a bleached extract suitable for biological assays. Key words: Chlorophyll a, UV radiation, activated charcoal, HPLC, secondary compounds in plant extracts.

  4. Dark High Density Dipolar Liquid of Excitons.

    Science.gov (United States)

    Cohen, Kobi; Shilo, Yehiel; West, Ken; Pfeiffer, Loren; Rapaport, Ronen

    2016-06-08

    The possible phases and the nanoscale particle correlations of two-dimensional interacting dipolar particles is a long-sought problem in many-body physics. Here we observe a spontaneous condensation of trapped two-dimensional dipolar excitons with internal spin degrees of freedom from an interacting gas into a high density, closely packed liquid state made mostly of dark dipoles. Another phase transition, into a bright, highly repulsive plasma, is observed at even higher excitation powers. The dark liquid state is formed below a critical temperature Tc ≈ 4.8 K, and it is manifested by a clear spontaneous spatial condensation to a smaller and denser cloud, suggesting an attractive part to the interaction which goes beyond the purely repulsive dipole-dipole forces. Contributions from quantum mechanical fluctuations are expected to be significant in this strongly correlated, long living dark liquid. This is a new example of a two-dimensional atomic-like interacting dipolar liquid, but where the coupling of light to its internal spin degrees of freedom plays a crucial role in the dynamical formation and the nature of resulting condensed dark ground state.

  5. High Average Power Laser Gain Medium With Low Optical Distortion Using A Transverse Flowing Liquid Host

    Science.gov (United States)

    Comaskey, Brian J.; Ault, Earl R.; Kuklo, Thomas C.

    2005-07-05

    A high average power, low optical distortion laser gain media is based on a flowing liquid media. A diode laser pumping device with tailored irradiance excites the laser active atom, ion or molecule within the liquid media. A laser active component of the liquid media exhibits energy storage times longer than or comparable to the thermal optical response time of the liquid. A circulation system that provides a closed loop for mixing and circulating the lasing liquid into and out of the optical cavity includes a pump, a diffuser, and a heat exchanger. A liquid flow gain cell includes flow straighteners and flow channel compression.

  6. Redox-active Crosslinkable Poly(ionic liquid)s

    NARCIS (Netherlands)

    Sui, Xiaofeng; Hempenius, Mark A.; Vancso, Gyula J.

    2012-01-01

    The synthesis of a new class of cross-linkable redox-responsive poly(ferrocenylsilane)-based poly(ionic liquid)s (PFS-PILs) is reported. PFS-PILs self-cross-link at low concentrations into nanogels or form macroscopic hydrogel networks at higher concentrations. PFS-PILs proved to be efficient

  7. Dynamics of quantum liquids at high momentum

    Energy Technology Data Exchange (ETDEWEB)

    Tanatar, B.; Talbot, E.F.; Glyde, H.R.

    1987-12-01

    The dynamic form factor S(Q,..omega..) in liquid /sup 3/He and /sup 4/He is evaluated in the wave-vector transfer range 3less than or equal toQless than or equal to15 A/sup -1/. The input is the pair interatomic potential, developed by Aziz et al. The S(Q,..omega..) is calculated within the random-phase approximation (RPA) which becomes valid when h-dash-barQ is much larger than the average momentum in the liquid. A T-matrix approximation represents the interaction appearing in the RPA. The aim is to explore how well S(Q,..omega..) can be described for 3less than or equal toQless than or equal to15 A/sup -1/ from first principles. In /sup 3/He, we find S(Q,..omega..) is a broad, nearly Gaussian function, centered just below the recoil frequency having a width and shape that agrees well with experiment. It does, however, have tails at high frequency which make important contributions to its moments. In /sup 4/He, S(Q,..omega..) is a more sharply peaked function which also agrees quite well with experiment. We are able to reproduce the oscillations in the peak position and in the width of S(Q,..omega..) with Q in liquid /sup 4/He observed by Martel et al. In the present model, these oscillations originate from oscillations in the magnitude of the T-matrix interaction with Q. The corresponding oscillations are predicted to be very small and probably unobservable in liquid /sup 3/He.

  8. Influence of the nature of surface-active substances on rheology of high-filled pastelike compositions on a base on liquid diene rubber and disperse filler

    Directory of Open Access Journals (Sweden)

    Alexander B. Surovtcev

    2014-12-01

    Full Text Available Results of researches on reception of pastelike high-filled compositions and estimation of their rheological properties with use cone – plate rheometer are presented. Liquid diene rubber with end hydroxyl groups (as binding, surfaceactive substance (PEAHENS and disperse filler are entered into structure of compositions. The estimation of sedimentation firmness of compositions and their fluidity in the range of pressure of shift 1 – 30 кPа and temperatures from 30 to 50°С is executed. By results of an estimation of influence of concentration dependence of PEAHENS on a viscosity indicator it is shown that its introduction in a pastelike composition at level 0.5 mas. % is expedient. For considered in work low polar liquid diene rubber more effective decrease in viscosity of a pastelike composition provide polyoxypropylene, especially on the average an interval of pressure of shift which basically can be used in practice. Slightly concede them titanorganic derivatives of oligomer polyoxypropylene. The greatest effect of decrease in viscosity for compositions will reach at use oligomer polyoxypropylene with molecular weight 480, in this case viscosity of a composition is at level of 10 Pa ⋅ s for rather wide interval of pressure of shift.

  9. High-Power Liquid-Metal Heat-Transfer Loop

    Science.gov (United States)

    Bhandari, Pradeep; Fujita, Toshio

    1991-01-01

    Proposed closed-loop system for transfer of thermal power operates at relatively high differential pressure between vapor and liquid phases of liquid-metal working fluid. Resembles "capillary-pumped" liquid-metal heat-transfer loop except electric field across permselective barrier of beta alumina keeps liquid and vapor separate at heat-input end. Increases output thermal power, contains no moving parts, highly reliable and well suited to long-term unattended operation.

  10. Rapid microwave hydrothermal synthesis of ZnGa2O4 with high photocatalytic activity toward aromatic compounds in air and dyes in liquid water

    Science.gov (United States)

    Sun, Meng; Li, Danzhen; Zhang, Wenjuan; Chen, Zhixin; Huang, Hanjie; Li, Wenjuan; He, Yunhui; Fu, Xianzhi

    2012-06-01

    ZnGa2O4 was synthesized from Ga(NO3)3 and ZnCl2 via a rapid and facile microwave-assisted hydrothermal method. The photocatalytic properties of the as-prepared ZnGa2O4 were evaluated by the degradation of pollutants in air and aqueous solution under ultraviolet (UV) light illumination. The results demonstrated that ZnGa2O4 had exhibited efficient photocatalytic activities higher than that of commercial P25 (Degussa Co.) in the degradation of benzene, toluene, and ethylbenzene, respectively. In the liquid phase degradation of dyes (methyl orange, Rhodamine B, and methylene blue), ZnGa2O4 has also exhibited remarkable activities higher than that of P25. After 32 min of UV light irradiation, the decomposition ratio of methyl orange (10 ppm, 150 mL) over ZnGa2O4 (0.06 g) was up to 99%. The TOC tests revealed that the mineralization ratio of MO (10 ppm, 150 mL) was 88.1% after 90 min of reaction. A possible mechanism of the photocatalysis over ZnGa2O4 was also proposed.

  11. Highly anisotropic conductivity in organosiloxane liquid crystals

    Science.gov (United States)

    Gardiner, D. J.; Coles, H. J.

    2006-12-01

    In this paper, we present the conductivity and dielectric characterization of three homologous series of smectic A siloxane containing liquid crystals. The materials studied include one monomesogenic series, which consists of a 4-(ω-alkyloxy)-4'-cyanobiphenyl unit terminated by pentamethyldisiloxane, and two bimesogenic series, which consist of twin 4-(ω-alkyloxy)-4'-cyanobiphenyls joined via tetramethyldisiloxane or decamethylpentasiloxane. All of the compounds exhibit wide temperature range enantiotropic smectic A phases; the effect of the siloxane moiety is to suppress nematic morphology even in the short chain homologs. We find that these compounds exhibit a highly anisotropic conductivity: the value perpendicular to the director is to up to 200 times that parallel to the director. For the nonsiloxane analog 4-(ω-octyl)-4'-cyanobiphenyl (8CB), this value is approximately 2. It is also found that the dielectric anisotropy is reduced significantly; a typical value is ˜1 compared to 8.4 for 8CB. We propose that the origin of these unusual properties is in the smectic structure; the microphase separation of the bulky, globular siloxane moieties into liquidlike regions severely inhibits the mobility parallel to the director and across the smectic layers. Further, the inclusion of this unit acts to increase the antiparallel correlations of molecular dipoles in the aromatic and alkyloxy sublayers, reducing the dielectric anisotropy significantly compared to nonsiloxane analogs. The highly anisotropic conductivity suggests that these materials are particularly suitable for application in electro-optic effects which exploit this property, e.g., the bistable electro-optic effect in smectic A liquid crystals.

  12. Activity of strontium in Al-Sr liquid dilute solutions

    Energy Technology Data Exchange (ETDEWEB)

    Korc, B. (Warsaw Univ. of Technology, Dept. of Materials Science (Poland)); Panek, Z.; Fitzner, K. (Polish Academy of Sciences, Inst. of Metals Research, Cracow (Poland))

    1992-09-01

    The emf method employing concentration cells with liquid electrolyte and with liquid electrodes was used for the determination of strontium activity in liquid dilute Sr-Al solutions. Experiments were carried out on alloys of three different strontium mole fractions: X{sub Sr} = 0.01, 0.03 and 0.05, in the temperature range 973 to 1123 K. (orig.).

  13. IR Sensor Synchronizing Active Shutter Glasses for 3D HDTV with Flexible Liquid Crystal Lenses

    Directory of Open Access Journals (Sweden)

    Jeong In Han

    2013-12-01

    Full Text Available IR sensor synchronizing active shutter glasses for three-dimensional high definition television (3D HDTV were developed using a flexible liquid crystal (FLC lens. The FLC lens was made on a polycarbonate (PC substrate using conventional liquid crystal display (LCD processes. The flexible liquid crystal lens displayed a maximum transmission of 32% and total response time of 2.56 ms. The transmittance, the contrast ratio and the response time of the flexible liquid crystal lens were superior to those of glass liquid crystal lenses. Microcontroller unit and drivers were developed as part of a reception module with power supply for the IR sensor synchronizing active shutter glasses with the flexible liquid crystal lens prototypes. IR sensor synchronizing active shutter glasses for 3D HDTV with flexible liquid crystal lenses produced excellent 3D images viewing characteristics.

  14. Determination of sulfonamides in butter samples by ionic liquid magnetic bar liquid-phase microextraction high-performance liquid chromatography.

    Science.gov (United States)

    Wu, Lijie; Song, Ying; Hu, Mingzhu; Xu, Xu; Zhang, Hanqi; Yu, Aimin; Ma, Qiang; Wang, Ziming

    2015-01-01

    A novel, simple, and environmentally friendly pretreatment method, ionic liquid magnetic bar liquid-phase microextraction, was developed for the determination of sulfonamides in butter samples by high-performance liquid chromatography. The ionic liquid magnetic bar was prepared by inserting a stainless steel wire into the hollow of a hollow fiber and immobilizing ionic liquid in the micropores of the hollow fiber. In the extraction process, the ionic liquid magnetic bars were used to stir the mixture of sample and extraction solvent and enrich the sulfonamides in the mixture. After extraction, the analyte-adsorbed ionic liquid magnetic bars were readily isolated with a magnet from the extraction system. It is notable that the present method was environmentally friendly since water and only several microliters of ionic liquid were used in the whole extraction process. Several parameters affecting the extraction efficiency were investigated and optimized, including the type of ionic liquid, sample-to-extraction solvent ratio, the number of ionic liquid magnetic bars, extraction temperature, extraction time, salt concentration, stirring speed, pH of the extraction solvent, and desorption conditions. The recoveries were in the range of 73.25-103.85 % and the relative standard deviations were lower than 6.84 %. The experiment results indicated that the present method was effective for the extraction of sulfonamides in high-fat content samples.

  15. Salting-out assisted liquid-liquid extraction coupled to dispersive liquid-liquid microextraction for the determination of chlorophenols in wine by high-performance liquid chromatography.

    Science.gov (United States)

    Fan, Yingying; Hu, Shibin; Liu, Shuhui

    2014-12-01

    A novel procedure of sample preparation combined with high-performance liquid chromatography with diode array detection is introduced for the analysis of highly chlorinated phenols (trichlorophenols, tetrachlorophenols, and pentachlorophenol) in wine. The main features of the proposed method are (i) low-toxicity diethyl carbonate as extraction solvent to selectively extract the analytes without matrix effect, (ii) the combination of salting-out assisted liquid-liquid extraction and dispersive liquid-liquid microextraction to achieve an enrichment factor of 334-361, and (iii) the extract is analyzed by high-performance liquid chromatography to avoid derivatization. Under the optimum conditions, correlation coefficients (r) were >0.997 for calibration curves in the range 1-80 ng/mL, detection limits and quantification limits ranged from 0.19 to 0.67 and 0.63 to 2.23 ng/mL, respectively, and relative standard deviation was <8%. The method was applied for the determination of chlorophenols in real wines, with recovery rates in the range 82-104%. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Liquid Scintillation High Resolution Spectral Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Grau Carles, A.; Grau Malonda, A.

    2010-08-06

    The CIEMAT/NIST and the TDCR methods in liquid scintillation counting are based on the determination of the efficiency for total counting. This paper tries to expand these methods analysing the pulse-height spectrum of radionuclides. To reach this objective we have to generalize the equations used in the model and to analyse the influence of ionization and chemical quench in both spectra and counting efficiency. We present equations to study the influence of different photomultipliers response in systems with one, two or three photomultipliers. We study the effect of the electronic noise discriminator level in both spectra and counting efficiency. The described method permits one to study problems that up to now was not possible to approach, such as the high uncertainty in the standardization of pure beta-ray emitter with low energy when we apply the TDCR method, or the discrepancies in the standardization of some electron capture radionuclides, when the CIEMAT/NIST method is applied. (Author) 107 refs.

  17. Local elastic expansion model for viscous-flow activation energies of glass-forming molecular liquids

    DEFF Research Database (Denmark)

    Dyre, Jeppe; Olsen, Niels Boye; Christensen, Tage Emil

    1996-01-01

    A model for the viscosity of glass-forming molecular liquids is proposed in which a "flow event" requires a local volume increase. The activation energy for a flow event is identified with the work done in shoving aside the surrounding liquid; this work is proportional to the high-frequency shear...... modulus, which increases as the temperature decreases. The model is confirmed by experiments on a number of molecular liquids....

  18. Ultrasonic depth gauge for liquids under high pressure

    Science.gov (United States)

    Zuckerwar, Allan J. (Inventor); Mazel, David S. (Inventor)

    1988-01-01

    The invention relates to an ultrasonic depth gauge for liquids under high pressure and is particularly useful in the space industry where it is necessary to use a pressurized gas to transfer a liquid from one location to another. Conventional liquid depth gauges do not have the capability to operate under extreme high pressure (i.e., exceeding 300 psi). An ultrasonic depth gauge capable of withstanding high pressure according to the present invention is comprised of a transducer assembly and a supporting electronics unit. The former is mounted in to the bottom wall of a storage vessel with its resonating surface directly exposed to the highly pressurized liquid in the vessel. In operation, the ultrasonic pulse propagates upward through the liquid to the liquid-gas interface in the storage vessel. When the ultrasonic echo returns from the liquid-gas interface, it re-excites the composite resonator into vibration. The supporting electronics unit measures the round-trip transmit time for the ultrasonic pulse and its return echo to traverse the depth of the highly pressurized liquid. The novelty of the invention resides in the use of a conventional transducer rigidly bonded to the inside wall of a bored out conventional high-pressure plug to form a composite resonator capable of withstanding extremely high pressure.

  19. Treatment of ammonia in liquid hospital waste using activated carbon

    Science.gov (United States)

    Riyanto, Hayati, Lena

    2017-12-01

    In this research study of the treatment of ammonia in liquid hospitals waste using activated carbon. This study aims to the effect of activated carbon weight and precipitation time to the treatment of ammonia in liquid hospitals waste. Hospital liquid waste has been taken from Jogja International Hospital (JIH) Yogyakarta, Indonesia. Hospital liquid waste 100 mL is mixed with activated carbon with the varied weight that is 15, 30 and 60 g. After added with activated carbon then stirred with a magnetic stirrer for 15 minutes and a precipitation time of 0.5, 1.0 and 2.0 hours. The next step is the filtrate analyzed ammonia concentrations before and after treatment using UV-Vis Spectrophotometer. The results showed that activated carbon can reduce ammonia concentration in hospital liquid waste. The amount of the active carbon and the time of stirring, the greater the ammonia concentration decreases in hospital liquid waste. The best condition for the decrease of the ammonia concentration was obtained with active carbon and precipitation time is 60 g and 1.0 hours, respectively with ammonia decrease of 95.93%. The conclusion is that activated carbon can reduce ammonia concentration in hospital liquid waste.

  20. Porphyrins profile by high performance liquid chromatography ...

    African Journals Online (AJOL)

    Most porphyria symptoms are nonspecific and occur intermittently; resulting frequently in missed diagnosis since the disease itself is a rare one. The aim of the study is to establish a new reliable and accurate laboratory method for separation, identification and quantitation of urinary porphyrins by liquid chromatography ...

  1. Direct analysis of prostaglandin-E2 and -D2 produced in an inflammatory cell reaction and its application for activity screening and potency evaluation using turbulent flow chromatography liquid chromatography-high resolution mass spectrometry.

    Science.gov (United States)

    Shin, Jeong-Sook; Peng, Lei; Kang, Kyungsu; Choi, Yongsoo

    2016-09-09

    Direct analysis of prostaglandin-E2 (PGE2) and -D2 (PGD2) produced from a RAW264.7 cell-based reaction was performed by liquid chromatography high-resolution mass spectrometry (LC-HRMS), which was online coupled with turbulent flow chromatography (TFC). The capability of this method to accurately measure PG levels in cell reaction medium containing cytokines or proteins as a reaction byproduct was cross-validated by two conventional methods. Two methods, including an LC-HRMS method after liquid-liquid extraction (LLE) of the sample and a commercial PGE2 enzyme-linked immunosorbent assay (ELISA), showed PGE2 and/or PGD2 levels almost similar to those obtained by TFC LC-HRMS over the reaction time after LPS stimulation. After the cross-validation, significant analytical throughputs, allowing simultaneous screening and potency evaluation of 80 natural products including 60 phytochemicals and 20 natural product extracts for the inhibition of the PGD2 produced in the cell-based inflammatory reaction, were achieved using the TFC LC-HRMS method developed. Among the 60 phytochemicals screened, licochalcone A and formononetin inhibited PGD2 production the most with IC50 values of 126 and 151nM, respectively. For a reference activity, indomethacin and diclofenac were used, measuring IC50 values of 0.64 and 0.21nM, respectively. This method also found a butanol extract of Akebia quinata Decne (AQ) stem as a promising natural product for PGD2 inhibition. Direct and accurate analysis of PGs in the inflammatory cell reaction using the TFC LC-HRMS method developed enables the high-throughput screening and potency evaluation of as many as 320 samples in less than 48h without changing a TFC column. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Control of Liquid Sloshing Container using Active Force Control Method

    Science.gov (United States)

    Setyo Purnomo, Didik; Rachmad Anom Besari, Adnan; Darojah, Zaqiatud

    2017-04-01

    This paper presents a robust control method to relieve the sloshing of liquid container transport using Active Force Control (AFC) method. A model of two degree-of-freedom (2-DOF) liquid container transfer was implemented in this research as the main dynamical system to be controlled. The surface of liquid is maintained in a flat position, so that changes the slope of liquid surface countered by changing the acceleration of container. The focus of this research is how to use AFC method being applied to the system, so that it can suppress liquid sloshing. The control scheme were simulated, compare between PID-AFC and pure PID. Simulations has been conducted, the results show that the PID-AFC have superior performance to suppress the sloshing compared with pure PID, especially if disturbance occurred.

  3. ANALYSIS OF AMINO ACIDS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY

    Directory of Open Access Journals (Sweden)

    Qurat E Noor Baig

    2016-06-01

    Full Text Available Amino acids are the building blocks of proteins and are considered as the key precursors for the formation of hormones and low molecular weight nitrogenous substances with biological importance. Since the analysis of amino acids has been carried out for both qualitative and quantitative purposes with an aim to study their levels in the plasma concentration, the quantitative determination, in particular, also helps in the diagnosis of different diseases associated with their deficiency. This review article deals with the determination of amino acids by chromatographic methods which include ion-exchange chromatography (IEC, high performance liquid chromatography (HPLC, reverse phase-high performance liquid chromatography (RP-HPLC and ultra-performance liquid chromatography (UPLC. The review will also give an idea for the preparation of samples, derivatization methods for the analysis of amino acids (direct and indirect methods and separation of amino acids by high performance liquid chromatographic technique.

  4. Airway surface liquid contains endogenous DNase activity which can be activated by exogenous magnesium

    Directory of Open Access Journals (Sweden)

    Rosenecker J

    2009-07-01

    Full Text Available Abstract Introduction The removal of highly viscous mucus from the airways is an important task in the treatment of chronic lung disease like in cystic fibrosis. The inhalation of recombinant human DNase-I (rhDNase-I is used to facilitate the removal of tenacious airway secretions in different lung diseases and especially in CF. Little is known about endogenous DNase activity in the airway surface liquid. Therefore, we analysed bronchoalveolar lavage fluid (BAL and exhaled breath condensate (EBC for the presence of endogenous DNase activity. Methods The degradation of plasmid DNA by BAL from patients who had diagnostic bronchoscopy and bronchoalveolar lavage was analyzed. In a group of CF patients and healthy control volunteers the exhaled breath condensate was obtained and also analyzed for the ability to degrade plasmid DNA. In addition, the ability of magnesium to activate endogenous DNase activity in BAL and exhaled breath condensate was investigated. Results The analyzed BAL samples degraded plasmid DNA only after preincubation with magnesium. When analyzing the exhaled breath condensate the samples obtained from the healthy volunteers showed no DNase activity even after preincubation with magnesium, whereas in one of the two samples obtained from CF patients we found a DNase activity after preincubation with magnesium. Conclusion Increasing the magnesium concentration in the airway surface liquid by aerosolisation of magnesium solutions or oral magnesium supplements could improve the removal of highly viscous mucus in chronic lung disease by activating endogenous DNase activity.

  5. A High Temperature Liquid Plasma Model of the Sun

    Directory of Open Access Journals (Sweden)

    Robitaille P.-M.

    2007-01-01

    Full Text Available In this work, a liquid model of the Sun is presented wherein the entire solar mass is viewed as a high density/high energy plasma. This model challenges our current understanding of the densities associated with the internal layers of the Sun, advocating a relatively constant density, almost independent of radial position. The incompressible nature of liquids is advanced to prevent solar collapse from gravitational forces. The liquid plasma model of the Sun is a non-equilibrium approach, where nuclear reactions occur throughout the solar mass. The primary means of addressing internal heat transfer are convection and conduction. As a result of the convective processes on the solar surface, the liquid model brings into question the established temperature of the solar photosphere by highlighting a violation of Kirchhoff’s law of thermal emission. Along these lines, the model also emphasizes that radiative emission is a surface phenomenon. Evidence that the Sun is a high density/high energy plasma is based on our knowledge of Planckian thermal emission and condensed matter, including the existence of pressure ionization and liquid metallic hydrogen at high temperatures and pressures. Prior to introducing the liquid plasma model, the historic and scientific justifications for the gaseous model of the Sun are reviewed and the gaseous equations of state are also discussed.

  6. Determination of adenosine deaminase activity in dried blood spots by a nonradiochemical assay using reversed-phase high-performance liquid chromatography

    NARCIS (Netherlands)

    van Kuilenburg, A. B. P.; Zoetekouw, L.; Meijer, J.; Kuijpers, T. W.

    2010-01-01

    Adenosine deaminase (ADA) deficiency is a rare metabolic disease causing severe combined immunodeficiency (SCID). An assay to determine ADA activity in dried blood spots was developed using reversed-phase HPLC. The assay was linear with reaction times up to at least 4 hours, and protein

  7. Determination of catechol O-methyltransferase activity in relation to melanin metabolism using high-performance liquid chromatography with fluorimetric detection

    NARCIS (Netherlands)

    Smit, N. P.; Pavel, S.; Kammeyer, A.; Westerhof, W.

    1990-01-01

    A new sensitive method for the determination of catechol O-methyltransferase activity has been developed. The method is based on the O-methylation of the indolic intermediates of melanin metabolism. The substrate, 5,6-dihydroxyindole-2-carboxylic acid, is converted by the enzyme to two O-methylated

  8. Additives for high temperature liquid lubricants. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Yavrouian, A.H.; Repar, J.; Moran, C.M.; Lawton, E.A.; Anderson, M.S.

    1994-01-15

    The purpose of this task was to perform research for the Department of Energy (DOE) on the synthesis and characterization of additives for liquid lubricants which could lead to significant improvements in the major tribological task area of friction and wear reduction at high temperature. To this end JPL surveyed candidate precursor compounds which are soluble in liquid lubricants, synthesized the most promising of these materials, characterized them and submitted these additives to National Institute of Standards and Technology (NIST) for evaluation.

  9. High-performance liquid chromatography/high-resolution mass spectrometry for the characterization of transformation products of ionic liquids.

    Science.gov (United States)

    Fabbri, Debora; Calza, Paola; Noè, Giorgio; Santoro, Valentina; Medana, Claudio

    2017-12-15

    Ionic liquids (ILs) are a subject of active research in the field of alternative solvents. We studied the behaviour of a piperidine IL, 1-butyl-1-methylpiperidinium tetrafluoroborate (BMPA), through the elucidation of its transformation products (TPs) in water. The transformation pathways of BMPA were investigated using high-performance liquid chromatography (HPLC) combined with a hybrid LTQ-Orbitrap instrument on the basis of mass defect filtering. TPs of BMPA were identified by fragmentation patterns and accurate mass measurements. The separation and identification of 32 TPs was achieved. BMPA can be oxidized at different positions in the alkyl chains. The ultimate products corresponds to N-methyl-piperidinium and some byproducts involving ring-opening. Tests of acute toxicity, evaluated with Vibrio Fischeri bacteria, show that BMPA transformation proceeds through the formation of slightly harmful compounds. Results showed that the main transformation pathways of BMPA were alkyl chain hydroxylation/shortening and de-alkylation, and that HPLC/LTQ-Orbitrap can serve as an important analytical platform to gather the unknown TPs of ILs. Copyright © 2017 John Wiley & Sons, Ltd.

  10. Ultra-high performance liquid chromatographic and mass spectrometric analysis of active vitamin B12 in cells of Propionibacterium and fermented cereal matrices

    OpenAIRE

    Chamlagain, Bhawani; Edelmann, Minnamari; Kariluoto, Susanna; Ollilainen, Velimatti; Piironen, Vieno

    2015-01-01

    A sensitive and selective method is needed to analyse in situ produced vitamin B12 in plant-based materials, potential new dietary sources of vitamin B12. A UHPLC/UV method was developed and validated for the determination of human active vitamin B12 in cell extracts of Propionibacterium freudenreichii subsp. shermanii and after immunoaffinity purification in extracts of cereal matrices fermented by P. freudenreichii. An Acquity HSS T3 C18 column resulted in a baseline separation, a calibrati...

  11. Ultra-high performance liquid chromatographic and mass spectrometric analysis of active vitamin B12 in cells of Propionibacterium and fermented cereal matrices.

    Science.gov (United States)

    Chamlagain, Bhawani; Edelmann, Minnamari; Kariluoto, Susanna; Ollilainen, Velimatti; Piironen, Vieno

    2015-01-01

    A sensitive and selective method is needed to analyse in situ produced vitamin B12 in plant-based materials, potential new dietary sources of vitamin B12. A UHPLC/UV method was developed and validated for the determination of human active vitamin B12 in cell extracts of Propionibacterium freudenreichii subsp. shermanii and after immunoaffinity purification in extracts of cereal matrices fermented by P. freudenreichii. An Acquity HSS T3 C18 column resulted in a baseline separation, a calibration curve of excellent linearity and a low limit of detection (0.075 ng/5 μL injection). As confirmed by UHPLC-MS, the active vitamin B12 could be separated from pseudovitamin B12. The recovery of vitamin B12 from purified spiked cereal matrices was good (>90%; RSD<5%). A nutritionally relevant amount of active vitamin B12 was produced by P. freudenreichii in cereal malt matrices (up to 1.9 μg/100 g) in 24h at 28 °C. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Determination of fourteen polyphenols in pulses by high performance liquid chromatography-diode array detection (HPLC-DAD) and correlation study with antioxidant activity and colour.

    Science.gov (United States)

    Giusti, Federica; Caprioli, Giovanni; Ricciutelli, Massimo; Vittori, Sauro; Sagratini, Gianni

    2017-04-15

    Pulses, which include lentils, beans, chickpeas, peas, and soybeans, provide an important source of proteins, dietary fibers, minerals and vitamins, as well as such important bioactive molecules as polyphenols. The presence of polyphenols is often related to the colour of the pulse and to its antioxidant activity. The aim of this work was to set up a new HPLC-DAD method for simultaneously analysing 14 polyphenolic compounds, including two anthocyanins, in different varieties of pulses and to correlate the polyphenol content with the seed coat colour and the antioxidant activity. The total content of the analysed polyphenols ranged from 3mg/kg for dehulled red lentils to 1630.5mg/kg for ruviotto beans. Samples with dark testa (or seed coat), namely black lentils and diavoli beans, had higher antioxidant activity than those with pale testa, and a positive correlation was found between total phenolic content (TPC) and IC50 for dark coloured varieties. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Liquid crystallinity driven highly aligned large graphene oxide composites

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyung Eun; Oh, Jung Jae; Yun, Taeyeong [Center for Nanomaterials and Chemical Reactions, Institute for Basic Science (IBS), Daejeon 305-701 (Korea, Republic of); Department of Chemistry, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 305-701 (Korea, Republic of); Kim, Sang Ouk, E-mail: sangouk.kim@kaist.ac.kr [Center for Nanomaterials and Chemical Reactions, Institute for Basic Science (IBS), Daejeon 305-701 (Korea, Republic of); Department of Chemistry, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 305-701 (Korea, Republic of)

    2015-04-15

    Graphene is an emerging graphitic carbon materials, consisting of sp{sup 2} hybridized two dimensinal honeycomb structure. It has been widely studied to incorporate graphene with polymer to utilize unique property of graphene and reinforce electrical, mechanical and thermal property of polymer. In composite materials, orientation control of graphene significantly influences the property of composite. Until now, a few method has been developed for orientation control of graphene within polymer matrix. Here, we demonstrate facile fabrication of high aligned large graphene oxide (LGO) composites in polydimethylsiloxane (PDMS) matrix exploiting liquid crystallinity. Liquid crystalline aqueous dispersion of LGO is parallel oriented within flat confinement geometry. Freeze-drying of the aligned LGO dispersion and subsequent infiltration with PDMS produce highly aligned LGO/PDMS composites. Owing to the large shape anisotropy of LGO, liquid crystalline alignment occurred at low concentration of 2 mg/ml in aqueous dispersion, which leads to the 0.2 wt% LGO loaded composites. - Graphical abstract: Liquid crystalline LGO aqueous dispersions are spontaneous parallel aligned between geometric confinement for highly aligned LGO/polymer composite fabrication. - Highlights: • A simple fabrication method for highly aligned LGO/PDMS composites is proposed. • LGO aqueous dispersion shows nematic liquid crystalline phase at 0.8 mg/ml. • In nematic phase, LGO flakes are highly aligned by geometric confinement. • Infiltration of PDMS into freeze-dried LGO allows highly aligned LGO/PDMS composites.

  14. The Effectivity of Marine Bio-activator and Surimi Liquid Waste Addition of Characteristics Liquid Organic Fertilizer from Sargassum sp.

    Directory of Open Access Journals (Sweden)

    Putri Wening Ratrinia

    2017-02-01

    Full Text Available AbstractOrganic fertilizer is highly recommended for soil and plant because it can improve the productivity and repair physical, chemical, and biological of soil. Sargassum sp. and surimi liquid wastes contain organic matter and nutrient needed by plants and soils. The addition of marine bio-activator which contains bacterial isolates from litter mangrove serves to accelerate the composting time and increases the activity of microorganisms in the decomposition process. The purpose of this study was to determine optimum time and the best formulation of decomposition process organic fertilizer. Raw materials used a waste of seaweed Sargassum sp., marine bio-activator and surimi liquid waste from catfish (Clarias sp.. The research was conducted six treatments control, Sargassum sp. + marine bio-activator, surimi liquid waste , Sargassum sp. + marine bio-activator + surimi liquid waste 80%, 90%, 100%. All treatments were fermented for 9 days and analysed the C-organic, total N, C/N ratio, P2O5, K2O on days 0, 3, 6 and 9. The results showed the optimum fermentation period was on the 6th day. The most optimum concentration of surimi liquid waste added was at a concentration of 90%, with characteristics of the products was C-organic 0.803±0.0115%, total N 740.063±0.0862 ppm, C/N ratio 10.855±0.1562, P2O5 425.603±0.2329 ppm, K2O 2738.627±0.2836 ppm.

  15. The Effectivity of Marine Bio-activator and Surimi Liquid Waste Addition of Characteristics Liquid Organic Fertilizer from Sargassum sp.

    Directory of Open Access Journals (Sweden)

    Putri Wening Ratrinia

    2016-12-01

    Full Text Available Organic fertilizer is highly recommended for soil and plant because it can improve the productivity and repair physical, chemical, and biological of soil. Sargassum sp. and surimi liquid wastes contain organic matter and nutrient needed by plants and soils. The addition of marine bio-activator which contains bacterial isolates from litter mangrove serves to accelerate the composting time and increases the activity of microorganisms in the decomposition process. The purpose of this study was to determine optimum time and the best formulation of decomposition process organic fertilizer. Raw materials used a waste of seaweed Sargassum sp., marine bio-activator and surimi liquid waste from catfish (Clarias sp.. The research was conducted six treatments control, Sargassum sp. + marine bio-activator, surimi liquid waste , Sargassum sp. + marine bio-activator + surimi liquid waste 80%, 90%, 100%. All treatments were fermented for 9 days and analysed the C-organic, total N, C/N ratio, P2 O5 , K2 O on days 0, 3, 6 and 9. The results showed the optimum fermentation period was on the 6th day. The most optimum concentration of surimi liquid waste added was at a concentration of 90%, with characteristics of the products was C-organic 0.803 ± 0.0115 %, total N 740.063 ± 0.0862 ppm, C/N ratio 10.855 ± 0.1562, P2 O5 425.603 ± 0.2329 ppm, K2 O 2738.627 ± 0.2836 ppm.

  16. Determination for Synthesis and Content of Tetrahydropalmatine Based on High Performance Liquid Chromatography

    OpenAIRE

    Yuanming Zhang

    2014-01-01

    Tetrahydropalmatine is a kind of food additive with useful medicine value (dietary supplement), the tetrahydropalmatine synthetic process by using high performance liquid chromatography method was researched in the study, the experiments show that the dissolution rate of active ingredients in the tetrahydropalmatine water extract synthesized by this method has increased and the amount of active ingredient has greatly improved.

  17. Liquid Droplet Dynamics in Gravity Compensating High Magnetic Field

    Science.gov (United States)

    Bojarevics, V.; Easter, S.; Pericleous, K.

    2012-01-01

    Numerical models are used to investigate behavior of liquid droplets suspended in high DC magnetic fields of various configurations providing microgravity-like conditions. Using a DC field it is possible to create conditions with laminar viscosity and heat transfer to measure viscosity, surface tension, electrical and thermal conductivities, and heat capacity of a liquid sample. The oscillations in a high DC magnetic field are quite different for an electrically conducting droplet, like liquid silicon or metal. The droplet behavior in a high magnetic field is the subject of investigation in this paper. At the high values of magnetic field some oscillation modes are damped quickly, while others are modified with a considerable shift of the oscillating droplet frequencies and the damping constants from the non-magnetic case.

  18. Stand-off detection of liquid thin films using active mid-infrared hyperspectral imaging

    Science.gov (United States)

    Maidment, L.; Zhang, Z.; Howle, C. R.; Lee, S. T.; Christie, A.; Reid, D. T.

    2015-10-01

    A hyperspectral imaging system was implemented using active illumination in the 3-4-μm band from an MgO:PPLN ultrafast optical parametric oscillator. Using a staring configuration based on a high-resolution mid-IR camera it was possible to distinguish between liquid chemicals based on their absorption characteristics, demonstrating the potential for standoff detection of a wide range of liquids.

  19. Liquid Fermentation of Ganoderma applanatum and Antioxidant Activity of Exopolysaccharides.

    Science.gov (United States)

    Zhong-Hua, Liu; Xiao-Ge, Hou; Jin-Hui, Zhao; Le, H E

    2015-01-01

    The medium composition and fermentation conditions of Ganoderma applanatum(GA) strain were optimized by the liquid shake flask fermentation, and the antioxidant activity of exopolysaccharides was investigated. The results showed that the optimal conditions of the liquid fermentation of GA strain were as follows: Carbon source was corn powder, nitrogen source was soy powder, the initial pH was 6.0, the inoculum size was 8%, the fermentation temperature was 32(o)C, the fermentation time was 7 d. The exopolysaccharides of GA strain could scavenge hydroxyl radicals(HR) and superoxide anion radicals(SAR), and the concentration of exopolysaccharides was positively related to the antioxidant activity.

  20. Antibiofilm activity of cashew juice pulp against Staphylococcus aureus, high performance liquid chromatography/diode array detection and gas chromatography-mass spectrometry analyses, and interference on antimicrobial drugs

    Directory of Open Access Journals (Sweden)

    Marcus V. Dias-Souza

    2017-07-01

    Full Text Available The epidemiology of Staphylococcus aureus infections has evolved in recent years, as this species is a major Gram-positive pathogen associated with healthcare services. The antimicrobial resistance of this species raises an urgent need for new treatment strategies. Fruits play important nutritional and economic roles in society, but their biological and pharmacological features are poorly explored when compared to nonedible parts of plants such as barks and leaves. In this study, we show that the cashew apple juice [cashew juice pulp (CJP] extract is active against the planktonic cells of S. aureus strains, and for the first time, we show that CJP is also active against S. aureus biofilms. High performance liquid chromatography and gas chromatography-mass spectrometry analyses were conducted to prospect for polyphenols and free carbohydrates, respectively. Cashew apple juice, which is rich in nutrients, is widely consumed in Brazil; therefore, the quality attributes of CJPs were investigated. Samples were evaluated for pH, total titratable acidity, vitamin C levels, and total soluble solids. We also detected an antagonistic interference of CJP when it was combined with different antimicrobial drugs.

  1. High performance liquid chromatographic determination of ...

    African Journals Online (AJOL)

    ... calibration curve which indicated a strong relationship between the instrument response and the concentration of proguanil. The discussion also summarizes the derivatisation chemistry that have not being fully explored to date but may find utility in future development of highly sensitive analytical methods for biquanide ...

  2. High Performance Liquid Chromatography Method for the ...

    African Journals Online (AJOL)

    chromatography (HPLC) technique with UV-VIS detection method was developed for the determination of the compound in rat ... Keywords: Anethole, High performance liguid chromatography, Star anise, Essential oil, Rat plasma,. Illicium verum Hook. .... solution of anethole. Plasma proteins were precipitated by adding 0.3.

  3. Rendering high charge density of states in ionic liquid-gated MoS 2 transistors

    NARCIS (Netherlands)

    Lee, Y.; Lee, J.; Kim, S.; Park, H.S.

    2014-01-01

    We investigated high charge density of states (DOS) in the bandgap of MoS2 nanosheets with variable temperature measurements on ionic liquid-gated MoS2 transistors. The thermally activated charge transport indicates that the electrical current in the two-dimensional MoS 2 nanosheets under high

  4. Extraction and Purification of Glucoraphanin by Preparative High-Performance Liquid Chromatography (HPLC)

    Science.gov (United States)

    Lee, Iris; Boyce, Mary C.

    2011-01-01

    A student activity that focuses on the isolation of glucoraphanin from broccoli using preparative high-performance liquid chromatography (HPLC) is presented here. Glucoraphanin is a glucosinolate, whose byproducts are known to possess anticancer properties. It is present naturally at high levels in broccoli and other "Brassica" vegetables. This…

  5. Investigation of Active Control of Combustion Instabilities in Liquid Propellant Rocket Motors

    National Research Council Canada - National Science Library

    Zinn, B

    1999-01-01

    This study investigated the feasibility of active control of combustion instabilities in liquid fueled combustors using a liquid fuel injector actuator and adaptive control of combustion instabilities...

  6. Pulsed laser kinetic studies of liquids under high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Eyring, E.M.

    1991-11-25

    A high pressure apparatus constructed for measuring the rates of reactions in liquids under pressures ranging from 1 atm to 2000 atm has been used to measure the complexation kinetics of molybdenum hexacarbonyl reacting with 2,2-bipyridine, 4,4{prime}-dimethyl-2-2{prime}-bipyridine and 4,4{prime}-diphenyl-2-2{prime} bipyridine in toluene. Pentacarbonyl reaction intermediates are created by a 10 nsec flash of frequency tripled Nd:YAG laser light. Measured activation volumes for chelate ligand ring closure indicate a change in mechanism from associative interchange to dissociative interchange as steric hindrance increases. A similar high pressure kinetics study of molybdenum carbonyl complexation by several substituted phenanthrolines is now well advanced that indicates that with the more rigid phenanthroline ligands steric effects from bulky substituents have less effect on the ring closure mechanism than in the case of the bipyridine ligands. An experimental concentration dependence of the fluorescence quantum yield of cresyl violet has been harmonized with previously published contradictory reports. Fluorescence of cresyl violet in various solvents and in micellar systems has also been systematically explored.

  7. Ultrasonic level sensors for liquids under high pressure

    Science.gov (United States)

    Zuckerwar, A. J.; Mazel, D. S.; Hodges, D. Y.

    1986-01-01

    An ultrasonic level sensor of novel design continuously measures the level of a liquid subjected to a high pressure (up to about 40 MPa), as is sometimes required for the effective transfer of the liquid. The sensor operates as a composite resonator fabricated from a standard high-pressure plug. A flat-bottom hole is machined into the plug along its center line. An ultrasonic transducer is bonded rigidly to the interior surface of the bottom wall, while the exterior surface is in contact with the liquid. Although the bottom wall is designed to satisfy the pressure code, it is still sufficiently thin to permit ready excitation of the axisymmetric plate modes of vibration. The liquid level is measured by a conventional pulse-echo technique. A prototype sensor was tested successfully in a 2300-l water vessel at pressures up to about 37 MPa. A spectral analysis of the transmitted pulse reveals that the flexural, extensional, thickness-shear, and radial plate modes are excited into vibration, but none of these appears to be significantly affected by the pressurization of the liquid.

  8. Enzyme Activity and Biomolecule Templating at Liquid and Solid Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Harvey W. Blanch

    2004-12-01

    There are two main components of this research program. The first involves studies of the adsorption and catalytic activity of proteins at fluid-fluid and fluid-solid interfaces; the second employs biological macromolecules as templates at the solid-liquid interface for controlled crystallization of inorganic materials, to provide materials with specific functionality.

  9. Neurobiology of KB220Z-Glutaminergic-Dopaminergic Optimization Complex [GDOC] as a Liquid Nano: Clinical Activation of Brain in a Highly Functional Clinician Improving Focus, Motivation and Overall Sensory Input Following Chronic Intake.

    Science.gov (United States)

    Duquette, Lucien L; Mattiace, Frank; Blum, Kenneth; Waite, Roger L; Boland, Teresa; McLaughlin, Thomas; Dushaj, Kristina; Febo, Marcelo; Badgaiyan, Rajendra D

    2016-01-01

    With neurogenetic and epigenetic tools utilized in research and neuroimaging, we are unraveling the mysteries of brain function, especially as it relates to Reward Deficiency (RDS). We encourage the development of pharmaceuticals or nutraceuticals that promote a reduction in dopamine resistance and balance brain neurochemistry, leading to dopamine homeostasis. We disclose self-assessment of a highly functional professional under work-related stress following KB220Z use, a liquid (aqua) nano glutaminergic-dopaminergic optimization complex (GDOC). Subject took GDOC for one month. Subject self-administered GDOC using one-half-ounce twice a day. During first three days, unique brain activation occurred; resembling white noise after 30 minutes and sensation was strong for 45 minutes and then dissipated. He described effect as if his eyesight improved slightly and pointed out that his sense of smell and sleep greatly improved. Subject experienced a calming effect similar to meditation that could be linked to dopamine release. He also reported control of going over the edge after a hard day's work, which was coupled with a slight increase in energy, increased motivation to work, increased focus and multi-tasking, with clearer purpose of task at hand. Subject felt less inhibited in a social setting and suggested Syndrome that GDOC increased his Behavior Activating System (reward), while having a decrease in the Behavior Inhibition System (caution). These results and other related studies reveal an improved mood, work-related focus, and sleep. These effects as a subjective feeling of brain activation maybe due to direct or indirect dopaminergic interaction. While this case is encouraging, we must await more research in a larger randomized placebo-controlled study to map the role of GDOC, especially in a nano-sized product, to determine the possible effects on circuit inhibitory control and memory banks and the induction of dopamine homeostasis independent of either hypo- or

  10. Sensitive high performance liquid chromatographic method for the ...

    African Journals Online (AJOL)

    A new simple, sensitive, cost-effective and reproducible high performance liquid chromatographic (HPLC) method for the determination of proguanil (PG) and its metabolites, cycloguanil (CG) and 4-chlorophenylbiguanide (4-CPB) in urine and plasma is described. The extraction procedure is a simple three-step process ...

  11. Quantification of Tea Flavonoids by High Performance Liquid Chromatography

    Science.gov (United States)

    Freeman, Jessica D.; Niemeyer, Emily D.

    2008-01-01

    We have developed a laboratory experiment that uses high performance liquid chromatography (HPLC) to quantify flavonoid levels in a variety of commercial teas. Specifically, this experiment analyzes a group of flavonoids known as catechins, plant-derived polyphenolic compounds commonly found in many foods and beverages, including green and black…

  12. An optimized gossypol high-performance liquid chromatography ...

    Indian Academy of Sciences (India)

    A comparative study on gossypol content of various genetic types of pigment glands of cotton varieties was conducted through an optimized high-performance liquid chromatography (HPLC) on a C18 column (4.6 mm × 250 mm, 5 m particle) with methanol–0.5% acetic acid aqueous solution, 90 : 10 (v/v), as mobile phase, ...

  13. Buffer-Free High Performance Liquid Chromatography Method for ...

    African Journals Online (AJOL)

    Purpose: To develop and validate a simple, economical and reproducible high performance liquid chromatographic (HPLC) method for the determination of theophylline in pharmaceutical dosage forms. Method: Caffeine was used as the internal standard and reversed phase C-18 column was used to elute the drug and ...

  14. Spectrum-effect relationships between high performance liquid ...

    African Journals Online (AJOL)

    Purpose: To investigate the spectrum-effect relationships between high performance liquid chromatography (HPLC) fingerprints and duodenum contractility of charred areca nut (CAN) on rats. Methods: An HPLC method was used to establish the fingerprint of charred areca nut (CAN). The promoting effect on contractility of ...

  15. Liquid state DNP using a 260 GHz high power gyrotron.

    Science.gov (United States)

    Denysenkov, Vasyl; Prandolini, Mark J; Gafurov, Marat; Sezer, Deniz; Endeward, Burkhard; Prisner, Thomas F

    2010-06-14

    Dynamic nuclear polarization (DNP) at high magnetic fields (9.2 T, 400 MHz (1)H NMR frequency) requires high microwave power sources to achieve saturation of the EPR transitions. Here we describe the first high-field liquid-state DNP results using a high-power gyrotron microwave source (20 W at 260 GHz). A DNP enhancement of -29 on water protons was obtained for an aqueous solution of Fremy's Salt; in comparison the previous highest value was -10 using a solid-state microwave power source (maximum power 45 mW). The increased enhancements are partly due to larger microwave saturation and elevated sample temperature. These experimentally observed DNP enhancements, which by far exceed the predicted values extrapolated from low-field DNP experiments, demonstrate experimentally that DNP is possible in the liquid state also at high magnetic fields.

  16. High frequency, realtime measurements of stable isotopes in liquid water

    Science.gov (United States)

    Weiler, M.; Herbstritt, B.; Gralher, B.

    2012-04-01

    We developed a method to measure in-situ the isotopic composition of liquid water with minimal supervision and, most important, with a temporal resolution of less than a minute. For this purpose a off-the-shelf microporous hydrophobic membrane contactor for under 200€ was combined with an isotope laser spectrometer (Picarro). The contactor, originally designed for degassing liquids, was used with nitrogen as carrier gas in order to transform a small fraction of liquid water to water vapor. The generated water vapor was then analyzed continuously by the isotope laser spectrometer. To prove the membrane's applicability we determined the specific isotope fractionation factor for the phase change through the contactor's membrane for a common temperature range and with different waters of known isotopic compositions. This fractionation factor is then used to derive the liquid water isotope ratio from the measured water vapor isotope ratios and the measured temperature at the phase change. The system was compared for breakthrough curves of isotopically enriched water and the isotope values corresponded very well with those of liquid water samples taken simultaneously and analyzed with a conventional method (CRDS). The introduced method supersedes taking liquid samples and employs only relative cheap and readily available components. This makes it a relatively inexpensive, fast, user-friendly and easily reproducible method. It can be applied in both the field and laboratory wherever a water vapor isotope analyzer can be run and whenever real-time isotope data of liquid water are required at high temporal resolution with the same accuracy as collecting individual water samples.

  17. Trends in High Performance Liquid Chromatography for Cultural Heritage.

    Science.gov (United States)

    Degano, Ilaria; La Nasa, Jacopo

    2016-04-01

    The separation, detection and quantitation of specific species contained in a sample in the field of Cultural Heritage requires selective, sensitive and reliable methods. Procedures based on liquid chromatography fulfil these requirements and offer a wide range of applicability in terms of analyte types and concentration range. The main applications of High Performance Liquid Chromatography in this field are related to the separation and detection of dyestuffs in archaeological materials and paint samples by reversed-phase liquid chromatography with suitable detectors. The relevant literature will be revised, with particular attention to sample treatment strategies and future developments. Reversed phase chromatography has also recently gained increasing importance in the analysis of lipid binders and lipid materials in archaeological residues: the main advantages and disadvantages of the new approaches will be discussed. Finally, the main applications of ion chromatography and size exclusion chromatography in the field of Cultural Heritage will be revised in this chapter.

  18. Pulsed laser kinetic studies of liquids under high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Eyring, E.M.

    1993-06-21

    Experiments have been developed for measuring the rates of chemical reactions liquids and in supercritical Co[sub 2]. A pulsed (Q-switch) Nd:YAG laser at 355 nm was the pump beam for laser flash photolysis studies of molybdenum and tungsten hexacarbonyls undergoing ligand displacement reactions by bidentate chelating agents such as 2,2[prime]-bipyridine in toluene. Experiments were carried out at 0.1 to 150 MPa. In the case of molybdenum complexes, the reaction mechanism for thermal ring closure is found from activation volumes to change from associative interchange to dissociative interchange as substituents on the 2,2[prime]-bipyridine ligands become bulkier. In a similar study of more rigid, substituted phenanthroline bidentate ligands it was found that substituent bulkiness had little effect on the thermal ring closure mechanism. Similar high pressure flash photolysis experiments with tungsten hexacarbonyl have also been completed. The concentration dependence of the fluorescence and nonradiative decay quantum yields for cresyl violet in several solvent have been reported as well as stability constants for the complexation of lithium ion by four different crown ethers dissolved in a room temperature molten salt.

  19. Highly Selective Liquid-Phase Benzylation of Anisole with Solid-Acid Zeolite Catalysts

    DEFF Research Database (Denmark)

    Poreddy, Raju; Shunmugavel, Saravanamurugan; Riisager, Anders

    2015-01-01

    Zeolites were evaluated as solid acid catalysts for the liquid-phase benzylation of anisole with benzyl alcohol, benzyl bromide, and benzyl chloride at 80 °C. Among the examined zeolites, H-mordenite-10 (H-MOR-10) demonstrated particular high activity (>99 %) and excellent selectivity (>96...

  20. Determination of Niacinamide in Lotions and Creams Using Liquid-Liquid Extraction and High-Performance Liquid Chromatography

    Science.gov (United States)

    Usher, Karyn M.; Simmons, Carolyn R.; Keating, Daniel W.; Rossi, Henry F., III

    2015-01-01

    Chemical separations are an important part of an undergraduate chemistry curriculum. Sophomore students often get experience with liquid-liquid extraction in organic chemistry classes, but liquid-liquid extraction is not as often introduced as a quantitative sample preparation method in honors general chemistry or quantitative analysis classes.…

  1. Ionic liquid-based air-assisted liquid-liquid microextraction followed by high performance liquid chromatography for the determination of five fungicides in juice samples.

    Science.gov (United States)

    You, Xiangwei; Chen, Xiaochu; Liu, Fengmao; Hou, Fan; Li, Yiqiang

    2018-01-15

    A novel and simple ionic liquid-based air-assisted liquid-liquid microextraction technique combined with high performance liquid chromatography was developed to analyze five fungicides in juice samples. In this method, ionic liquid was used instead of a volatile organic solvent as the extraction solvent. The emulsion was formed by pulling in and pushing out the mixture of aqueous sample solution and extraction solvent repeatedly using a 10mL glass syringe. No organic dispersive solvent was required. Under the optimized conditions, the limits of detection (LODs) were 0.4-1.8μgL(-1) at a signal-to-noise ratio of 3. The limits of quantification (LOQs) set as the lowest spiking levels with acceptable recovery in juices were 10μgL(-1), except for fludioxonil whose LOQ was 20μgL(-1). The proposed method was applied to determine the target fungicides in juice samples, and acceptable recoveries ranging from 74.9% to 115.4% were achieved. Copyright © 2017. Published by Elsevier Ltd.

  2. Equation of state of liquid Indium under high pressure

    Directory of Open Access Journals (Sweden)

    Huaming Li

    2015-09-01

    Full Text Available We apply an equation of state of a power law form to liquid Indium to study its thermodynamic properties under high temperature and high pressure. Molar volume of molten indium is calculated along the isothermal line at 710K within good precision as compared with the experimental data in an externally heated diamond anvil cell. Bulk modulus, thermal expansion and internal pressure are obtained for isothermal compression. Other thermodynamic properties are also calculated along the fitted high pressure melting line. While our results suggest that the power law form may be a better choice for the equation of state of liquids, these detailed predictions are yet to be confirmed by further experiment.

  3. Structure of liquid oxides at very high temperatures

    CERN Document Server

    Landron, C; Thiaudiere, D; Price, D L; Greaves, G N

    2003-01-01

    The structural characterization of condensed matter by synchrotron radiation combined with neutron data constitutes a powerful structural tool in material science. In order to investigate refractory liquids at very high temperatures, we have developed a new analysis chamber for performing combined X-ray absorption and diffraction measurements by using laser heating and aerodynamic levitation. A similar system has been designed for neutron experiments. This high temperature equipment presents several advantages: the container does not physically or chemically perturb the sample, heterogeneous nucleation during cooling is suppressed and pollution by the container is removed. This cell can operate under various gas conditions from room temperature up to 3000 deg. C obtained by means of a sealed 125 W CO sub 2 laser. Experiments have been performed at LURE, ESRF and at ISIS. We have studied the local structure around the cations in several liquid and solid oxides. We have shown that high temperature synchrotron d...

  4. Antifungal activity of ionic liquids based on (-)-menthol: a mechanism study.

    Science.gov (United States)

    Suchodolski, Jakub; Feder-Kubis, Joanna; Krasowska, Anna

    2017-04-01

    The mechanism of toxicity of chiral ionic liquids with (1R,2S,5R)-(-)-menthol [Cn-Am-Men][Cl] (n=10, 11 or 12) in the fungus Candida albicans is reported here. Ionic liquids were more toxic towards Candida strain lacking all identified multidrug resistance efflux pumps. Moreover, the compounds tested inhibited C. albicans filamentation at the concentration at which detached fungal cells also adhered to the plastic surface. Our results showed the high activity of all the tested chiral ionic liquids in the permeabilization of C. albicans' membranes and in the digestion and interruption of the cell wall. The investigated ionic liquids thus have potential as disinfectants because besides their antifungal and antiadhesive action these compounds do not cause hemolysis. Copyright © 2017 Elsevier GmbH. All rights reserved.

  5. High frequency dynamics and structural relaxation process in liquid ammonia

    Science.gov (United States)

    Giura, P.; Angelini, R.; Datchi, F.; Ruocco, G.; Sette, F.

    2007-08-01

    The dynamic structure factor S(Q,ω) of liquid ammonia has been measured by inelastic x-ray scattering in the terahertz frequency region as a function of the temperature in the range of 220-298K at a pressure P =85bars. The data have been analyzed using the generalized hydrodynamic formalism with a three term memory function to take into account the thermal, the structural, (α) and the microscopic (μ) relaxation processes affecting the dynamics of the liquid. This allows to extract the temperature dependence of the structural relaxation time (τα) and strength (Δα). The former quantity follows an Arrhenius behavior with an activation energy Ea=2.6±0.2kcal/mol, while the latter is temperature independent suggesting that there are no changes in the interparticle potential and arrangement with T. The obtained results, compared with those already existing in liquid water and liquid hydrogen fluoride, suggest the strong influence of the connectivity of the molecular network on the structural relaxation.

  6. Electrografting of stimuli-responsive, redox active organometallic polymers to gold from ionic liquids.

    Science.gov (United States)

    Feng, Xueling; Sui, Xiaofeng; Hempenius, Mark A; Vancso, G Julius

    2014-06-04

    Robust, dense, redox active organometallic poly(ferrocenylsilane) (PFS) grafted films were formed within 5 min by cathodic reduction of Au substrates, immersed in a solution of imidazolium-functionalized PFS chains in the ionic liquid 1-ethyl-3-methylimidazolium ethyl sulfate. The electrografted polymer films were employed as an electrochemical sensor, exhibiting high sensitivity, stability, and reproducibility.

  7. Partitioning of siderophile elements between metallic liquids and silicate liquids under high-pressure and temperature

    Science.gov (United States)

    Nakatsuka, A.; Urakawa, S.

    2010-12-01

    High-pressure metal-silicate element partitioning studies have shown the possibility that the mantle abundance of siderophile elements is consistent with core-mantle equilibration at high pressures and high temperatures. Equilibrium conditions are, however, still under debates partly due to the uncertainty of partition coefficients, which vary not only with pressure, temperature and oxygen fugacity but also with composition. We have carried out partitioning experiments of siderophile elements between liquid metal and ultramafic silicate liquid at high pressure to evaluate the effects of composition on the partition coefficients. Partitioning experiments were conducted by KAWAI-type high pressure apparatus. We used natural peridotite and Fe alloy as starting materials and they were contained in graphite capsule. The quenched samples were examined by electron microprobe. Quenched textures indicate that metallic melts coexisted with silicate melts during experiment. The metallic melt contained 7-9 wt% of C. Oxygen fugacity varied from IW-3 to IW-1 in associated with the composition of the starting material. At the reduced condition, silicate melt was enriched in SiO2 compared to peridotite because of the oxidation of Si in metallic melts. When oxygen fugacity is close to IW buffur, silicate melt was enriched in FeO due to the oxidation of metallic Fe and it had high NBO/T = 3.5-4. The partition coefficients D for Co, Ni and Fe were dependent on oxygen fugacity as well as the chemical compositions.

  8. Efficiency of liquid-jet high-pressure booster compressors

    Science.gov (United States)

    Mikheev, N. I.; Davletshin, I. A.; Mikheev, A. N.; Kratirov, D. V.; Fafurin, V. A.

    2017-11-01

    There are almost no experimental data on the head-capacity curves for liquid-jet compressors with the inlet gas pressure of liquid-jet apparatus more than 1 MPa. Meanwhile, this range is important for many engineering applications in which relatively low compressor ratio is required for the pumping of gas under high pressure. This is mostly the case when gas circulation is to be provided in a closed or almost closed circuit. A head-capacity curve of a liquid-jet apparatus has been estimated experimentally for the air pumping at up to 2.5 MPa by a water jet. To obtain this curve, a new original technique has been submitted and verified which is based on an inverse unsteady problem of gas pumping and allows derivation of the whole curve instead of one operating point, which is the case for conventional methods. The experiments have demonstrated that the relative head of the liquid-jet compressor grows with the apparatus inlet air pressure in the middle part of the curve.

  9. High-speed imaging polarimetry using liquid crystal modulators

    Directory of Open Access Journals (Sweden)

    Ambs P.

    2010-06-01

    Full Text Available This paper deals with dynamic polarimetric imaging techniques. The basics of modern polarimetry have been known for one and a half century, but no practical high-speed implementation providing the full polarization information is currently available. Various methods are reviewed which prove to be a trade-off between the complexity of the optical set-up and the amount of polarimetric information they provide (ie the number of components of the Stokes vector. Techniques using liquid crystal devices, incepted in the late 1990's, are emphasized. Optical set-ups we implemented are presented. We particularly focus on high-speed techniques (i.e. faster than 200 Hz using ferroelectric liquid crystal devices.

  10. Analysis of Tocopherols by High Performance Liquid Chromatography

    Directory of Open Access Journals (Sweden)

    B. Edison

    2009-01-01

    Full Text Available : Gas chromatography is the key technique for organic components and also for tocopherols analysis. High performance liquid chromatography has an important role to take part in applications such as the handling of less usual samples, prevention of degradation of heat sensitive functional groups and for micro preparative purposes. Many approaches for development of improved methods are suggested, especially for reversed phase applications.

  11. Ionic liquid electrolyte for supercapacitor with high temperature compatibility

    Science.gov (United States)

    Haque, Mazharul; Li, Qi; Kuzmenko, Volodymyr; Smith, Anderson D.; Enoksson, Peter

    2017-11-01

    This work describes the electrochemical investigation of two ionic liquids (ILs), 1-ethyl-3-methylimidazolium acetate (EMIM Ac) and 1-butyl-3-methylimidazolium chloride (BMIM Cl), as electrolytes in supercapacitors (SC). A comprehensive study on high temperature (HT) endurance that is required for system integration in microelectronics has also been carried out. It has been found that EMIM Ac containing SC performs better than a BMIM Cl containing SC, and HT treatment improves the capacitive performance.

  12. Thermodynamic properties of liquid sodium under high pressure

    Science.gov (United States)

    Li, Huaming; Zhang, Xiaoxiao; Sun, Yongli; Li, Mo

    2017-04-01

    Acquiring reliable thermodynamic properties in liquid metals at high pressure and temperature is still a challenge in both experiment and theory. Equation of state (EoS) offers an alternative approach free of many of the difficulties. Here using the EoS of a power law form we obtained the thermodynamic properties of liquid sodium under pressure along the isothermal lines, including isothermal buck modulus, thermal expansion coefficient, Grüneisen parameter, and Anderson-Grüneisen parameter. The results are in excellent agreement with available experimental data measured by a piezometer at high temperature and high pressure and sound velocity measurement with pulse-echo technique. We found that the pressure derivative of the isothermal bulk modulus at zero pressure is a monotonic function of temperature and has a value around 4. In addition, unexpected crossing points were found in the isobaric thermal expansion coefficient and Grüneisen parameter; and a minimum in the isobaric heat under isothermal compression was also observed. While some of these detailed predictions are yet to be confirmed by further experiment, our results suggest that the power law form may be a more suitable choice for the EoS of liquids metals.

  13. Exceptionally High Electric Double Layer Capacitances of Oligomeric Ionic Liquids.

    Science.gov (United States)

    Matsumoto, Michio; Shimizu, Sunao; Sotoike, Rina; Watanabe, Masayoshi; Iwasa, Yoshihiro; Itoh, Yoshimitsu; Aida, Takuzo

    2017-11-15

    Electric double layer (EDL) capacitors are promising as next-generation energy accumulators if their capacitances and operation voltages are both high. However, only few electrolytes can simultaneously fulfill these two requisites. Here we report that an oligomeric ionic liquid such as IL4 TFSI with four imidazolium ion units in its structure provides a wide electrochemical window of ∼5.0 V, similar to monomeric ionic liquids. Furthermore, electrochemical impedance measurements using Au working electrodes demonstrated that IL4 TFSI exhibits an exceptionally high EDL capacitance of ∼66 μF/cm 2 , which is ∼6 times as high as those of monomeric ionic liquids so far reported. We also found that an EDL-based field effect transistor (FET) using IL4 TFSI as a gate dielectric material and SrTiO 3 as a channel material displays a very sharp transfer curve with an enhanced carrier accumulation capability of ∼64 μF/cm 2 , as determined by Hall-effect measurements.

  14. Design of a cholesteric liquid crystal cell for a high-transmittance light shutter

    Science.gov (United States)

    Yu, Byeong-Hun; Huh, Jae-Won; Yoon, Tae-Hoon

    2014-02-01

    Recently, active studies on a transparent organic light-emitting diode (OLED) are in progress as a next generation display. However, since it is not possible to obtain a dark state using a transparent OLED, it exhibits poor visibility. This inevitable problem can be solved by placing a light shutter behind a transparent OLED display. In this paper, we propose a light shutter using dye-doped liquid crystals (LCs) whose Bragg reflection wavelength is chosen to be infrared by controlling the pitch of cholesteric liquid crystals (ChLCs). The proposed light shutter is switchable between the dark planar state and the transparent homeotropic state. The proposed light shutter has the advantages of the high transmittance, low operation voltage, and easy fabrication process compared with previous light shutter devices using liquid crystals. It is expected that the proposed light shutter can be applied to realize high visibility transparent OLEDs and emerging smart windows.

  15. Analysis of drugs of abuse in human plasma by dispersive liquid-liquid microextraction and high-performance liquid chromatography.

    Science.gov (United States)

    Fernández, P; Regenjo, M; Bermejo, A M; Fernández, A M; Lorenzo, R A; Carro, A M

    2015-04-01

    Opioids and cocaine are widely used at present, both for recreational purposes and as drugs of abuse. This raises the need to develop new analytical methods specifically designed for the simultaneous detection of several drugs of abuse in biological samples. In this work, dispersive liquid-liquid microextraction (DLLME) was assessed as a new sample treatment for the simultaneous extraction of morphine (MOR), 6-acetylmorphine (6AM), cocaine (COC), benzoylecgonine (BZE) and methadone (MET) from human plasma. Preliminary assays were done before developing an experimental design based on a Uniform Network Doehlert which allowed the optimum extraction conditions to be identified, namely: a volume of extractant solvent (chloroform) and dispersant solvent (acetonitrile) of 220 µl and 3.2 ml, respectively; 0.2 g of NaCl as a salting-out additive; pH 10.6 and ultrasound stirring for 3.5 min. The resulting extracts were analyzed by high-performance liquid chromatography with photodiode array detection (HPLC-PDA), using an XBridge® RP18 column (250 × 4.6 mm i.d., 5 µm particle size). Calibration graphs were linear over the concentration range 0.1-10 µg ml⁻¹, and detection limits ranged from 13.9 to 28.5 ng ml⁻¹. Precision calculated at three different concentration levels in plasma was included in the range 0.1-6.8% RSD. Recoveries of the five drugs were all higher than 84% on average. Finally the proposed method was successfully applied to 22 plasma samples from heroin, cocaine and/or methadone users, and the most frequently detected drug was benzoylecgonine, followed by methadone, cocaine and morphine. Copyright © 2014 John Wiley & Sons, Ltd.

  16. Determination of insecticides in water using in situ halide exchange reaction-assisted ionic liquid dispersive liquid-liquid microextraction followed by high-performance liquid chromatography.

    Science.gov (United States)

    Li, Songqing; Gao, Haixiang; Zhang, Jiaheng; Li, Yubo; Peng, Bing; Zhou, Zhiqiang

    2011-11-01

    A dispersive liquid-liquid microextraction (DLLME) method using in situ halide exchange reaction to form ionic liquid (IL) extraction phase was developed to determine four insecticides (i.e. methoxyfenozide, tetrachlorvinphos, thiamethoxam, and diafenthiuron) in water samples. The preconcentration procedure, followed by high-performance liquid chromatography and variable wavelength detectors (VWD), enabled the formation of the immiscible IL extraction phase; the insecticides were transferred into the IL phase simultaneously, which enhanced the efficiency and sufficiency, greatly shortening the operation time. The experimental parameters affecting the extraction efficiency including volume of extraction IL, extraction and centrifugation times, volume of the sample solution and exchanging reagent, and addition of organic solvent and salt were investigated and optimized. Under optimized conditions, the extractions yielded recoveries of the target analytes from 82 to 102%. The calibration curves were linear, and the correlation coefficient ranged from 0.9990 to 0.9999 under the concentration levels of 5-200 μg/L. The relative standard deviation (n=6) was 2.9-4.6%. The limits of detection (LODs) for the four insecticides were between 0.98 and 2.54 μg/L. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Ionic-liquid-based dispersive liquid-liquid microextraction coupled with high-performance liquid chromatography for the forensic determination of methamphetamine in human urine.

    Science.gov (United States)

    Wang, Ruifeng; Qi, Xiujuan; Zhao, Lei; Liu, Shimin; Gao, Shuang; Ma, Xiangyuan; Deng, Youquan

    2016-07-01

    Determination of methamphetamine in forensic laboratories is a major issue due to its health and social harm. In this work, a simple, sensitive, and environmentally friendly method based on ionic liquid dispersive liquid-liquid microextraction combined with high-performance liquid chromatography was established for the analysis of methamphetamine in human urine. 1-Octyl-3-methylimidazolium hexafluorophosphate with the help of disperser solvent methanol was selected as the microextraction solvent in this process. Various parameters affecting the extraction efficiency of methamphetamine were investigated systemically, including extraction solvent and its volume, disperser solvent and its volume, sample pH, extraction temperature, and centrifugal time. Under the optimized conditions, a good linearity was obtained in the concentration range of 10-1000 ng/mL with determination coefficient >0.99. The limit of detection calculated at a signal-to-noise ratio of 3 was 1.7 ng/mL and the relative standard deviations for six replicate experiments at three different concentration levels of 100, 500, and 1000 ng/mL were 6.4, 4.5, and 4.7%, respectively. Meanwhile, up to 220-fold enrichment factor of methamphetamine and acceptable extraction recovery (>80.0%) could be achieved. Furthermore, this method has been successfully employed for the sensitive detection of a urine sample from a suspected drug abuser. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Determination of diflubenzuron and chlorbenzuron in fruits by combining acetonitrile-based extraction with dispersive liquid-liquid microextraction followed by high-performance liquid chromatography.

    Science.gov (United States)

    Ruan, Chunqiang; Zhao, Xiang; Liu, Chenglan

    2015-09-01

    In this study, a simple and low-organic-solvent-consuming method combining an acetonitrile-partitioning extraction procedure followed by "quick, easy, cheap, effective, rugged and safe" cleanup with ionic-liquid-based dispersive liquid-liquid microextraction and high-performance liquid chromatography with diode array detection was developed for the determination of diflubenzuron and chlorbenzuron in grapes and pears. Ionic-liquid-based dispersive liquid-liquid microextraction was performed using the ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate as the extractive solvent and acetonitrile extract as the dispersive solvent. The main factors influencing the efficiency of the dispersive liquid-liquid microextraction were evaluated, including the extractive solvent type and volume and the dispersive solvent volume. The validation parameters indicated the suitability of the method for routine analyses of benzoylurea insecticides in a large number of samples. The relative recoveries at three spiked levels ranged between 98.6 and 109.3% with relative standard deviations of less than 5.2%. The limit of detection was 0.005 mg/kg for the two insecticides. The proposed method was successfully used for the rapid determination of diflubenzuron and chlorbenzuron residues in real fruit samples. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Theory of Activated Relaxation in Nanoscale Confined Liquids

    Science.gov (United States)

    Mirigian, Stephen; Schweizer, Kenneth

    2014-03-01

    We extend the recently developed Elastically Cooperative Nonlinear Langevin Equation(ECNLE) theory of activated relaxation in supercooled liquids to treat the case of geometrically confined liquids. Generically, confinement of supercooled liquids leads to a speeding up of the dynamics(with a consequent depression of the glass transition temperature) extending on the order of tens of molecular diameters away from a free surface. At present, this behavior is not theoretically well understood. Our theory interprets the speed up in dynamics in terms of two coupled effects. First, a direct surface effect, extending two to three molecular diameters from a free surface, and related to a local rearrangement of molecules with a single cage. The second is a longer ranged ``confinement'' effect, extending tens of molecular diameters from a free surface and related to the long range elastic penalty necessary for a local rearrangement. The theory allows for the calculation of relaxation time and Tg profiles within a given geometry and first principles calculations of relevant length scales. Comparison to both dynamic and pseudo-thermodynamic measurements shows reasonable agreement to experiment with no adjustable parameters.

  20. 21 CFR 862.2260 - High pressure liquid chromatography system for clinical use.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false High pressure liquid chromatography system for... Clinical Laboratory Instruments § 862.2260 High pressure liquid chromatography system for clinical use. (a) Identification. A high pressure liquid chromatography system for clinical use is a device intended to separate...

  1. Universality of the high-temperature viscosity limit of silicate liquids

    DEFF Research Database (Denmark)

    Zheng, Qiuju; Mauro, John C.; Ellison, Adam J.

    2011-01-01

    We investigate the high-temperature limit of liquid viscosity by analyzing measured viscosity curves for 946 silicate liquids and 31 other liquids including metallic, molecular, and ionic systems. Our results show no systematic dependence of the high-temperature viscosity limit on chemical...... composition for the studied liquids. Based on theMauro-Yue-Ellison-Gupta-Allan (MYEGA) model of liquid viscosity, the high-temperature viscosity limit of silicate liquids is 10−2.93 Pa·s. Having established this value, there are only two independent parameters governing the viscosity-temperature relation...

  2. Rapid determination of phthalate esters in alcoholic beverages by conventional ionic liquid dispersive liquid-liquid microextraction coupled with high performance liquid chromatography.

    Science.gov (United States)

    Fan, Yingying; Liu, Shuhui; Xie, Qilong

    2014-02-01

    A very simple, fast and environmentally friendly sample extraction method was proposed for the analysis of phthalate esters (PAEs, di-isobutyl phthalate (DIBP), dibutylphthalate (DBP), butylbenzylphthalate (BBP) and bis(2-ethylhexyl)phthalate (DEHP)) in alcoholic beverages by using conventional ionic liquid dispersive liquid-liquid microextraction. The samples were extracted by 160 μL 1-octyl-3-methylimidazolium hexafluorophosphate in the presence of appropriate amount of ethanol and 10% (w/v) sodium chloride solution; the enriched analytes in sedimented phases were analyzed by high performance liquid chromatography-diode array detector (HPLC-DAD). Under the optimum conditions, a satisfactory linearity (in the range of 0.02-1 μg mL(-1) for white spirits and 0.01-0.5 μg mL(-1) for red wines with the correlation coefficients (r) varying from 0.9983 to 1), acceptable recovery rates (88.5-103.5% for white spirits and 91.6-104.6% for red wines), good repeatability (RSD ≤ 8.0%) and low detection limits (3.1-4.2 ng mL(-1) for white spirits and 1.5-2.2 ng mL(-1) for red wines) were obtained. The developed method was successfully applied for the determination of the four PAEs in 30 white spirits and 11 red wines collected locally, and the DBP content in 63% (19:30) white spirits exceeded the specific migration limit of 0.3 mg kg(-1) established by international regulation. © 2013 Elsevier B.V. All rights reserved.

  3. High performance electrochemical pseudocapacitors from ionic liquid assisted electrochemically synthesized p-type conductive polymer.

    Science.gov (United States)

    Ehsani, A; Mohammad Shiri, H; Kowsari, E; Safari, R; Torabian, J; Hajghani, S

    2017-03-15

    In this paper firstly, 1-methyl-3-methylimidazolium bromide (MB) as a new high efficient ionic liquid was synthesized using chemical approach and then fabricated POAP/MB films by electro-polymerization of POAP in the presence of MB to serve as the active electrode for electrochemical supercapacitor. Theoretical study (AIM) and electrochemical analysis have been used for characterization of ionic liquid and POAP/MB composite film. Different electrochemical methods including galvanostatic charge-discharge experiments, cyclic voltammetry and electrochemical impedance spectroscopy are carried out in order to investigate the performance of the system. This work introduces new most efficient materials for electrochemical redox capacitors with advantages including ease synthesis, high active surface area and stability in an aqueous electrolyte. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Active Janus Particles at Interfaces of Liquid Crystals.

    Science.gov (United States)

    Mangal, Rahul; Nayani, Karthik; Kim, Young-Ki; Bukusoglu, Emre; Córdova-Figueroa, Ubaldo M; Abbott, Nicholas L

    2017-10-17

    We report an investigation of the active motion of silica-palladium Janus particles (JPs) adsorbed at interfaces formed between nematic liquid crystals (LCs) and aqueous phases containing hydrogen peroxide (H2O2). In comparison to isotropic oil-aqueous interfaces, we observe the elasticity and anisotropic viscosity of the nematic phase to change qualitatively the active motion of the JPs at the LC interfaces. Although contact line pinning on the surface of the JPs is observed to restrict out-of-plane rotational diffusion of the JPs at LC interfaces, orientational anchoring of nematic LCs on the silica (planar) and palladium (homeotropic) hemispheres biases JP in-plane orientations to generate active motion almost exclusively along the director of the LC at low concentrations of H2O2 (0.5 wt %). In contrast, displacements perpendicular to the director exhibit the characteristics of Brownian diffusion. At higher concentrations of H2O2 (1-3 wt %), we observe an increasing population of JPs propelled parallel and perpendicular to the LC director in a manner consistent with active motion. In addition, under these conditions, we also observe a subpopulation of JPs (approximately 10%) that exhibit active motion exclusively perpendicular to the LC director. These results are discussed in light of independent measurements of the distribution of azimuthal orientations of the JPs at the LC interfaces and calculations of the elastic energies that bias JP orientations. We also contrast our observations at LC interfaces to past studies of self-propulsion of particles within and at the interfaces of isotropic liquids.

  5. High-performance liquid chromatography for assaying NAD glycohydrolase from Neurospora crassa conidia.

    Science.gov (United States)

    Pietta, P; Pace, M; Menegus, F

    1983-06-01

    A rapid and sensitive high-performance liquid chromatographic technique was developed to determinate NAD glycohydrolase (EC 3.2.2.5.) activity from Neurospora crassa conidia. The separation of the assay substrate and products was achieved by isocratic reverse-phase chromatography and the peaks were detected by the absorbance at 259 nm. Quantities of NAD+ and nicotinamide as small as 10 pmol could be measured.

  6. Biredox ionic liquids with solid-like redox density in the liquid state for high-energy supercapacitors.

    Science.gov (United States)

    Mourad, Eléonore; Coustan, Laura; Lannelongue, Pierre; Zigah, Dodzi; Mehdi, Ahmad; Vioux, André; Freunberger, Stefan A; Favier, Frédéric; Fontaine, Olivier

    2017-04-01

    Kinetics of electrochemical reactions are several orders of magnitude slower in solids than in liquids as a result of the much lower ion diffusivity. Yet, the solid state maximizes the density of redox species, which is at least two orders of magnitude lower in liquids because of solubility limitations. With regard to electrochemical energy storage devices, this leads to high-energy batteries with limited power and high-power supercapacitors with a well-known energy deficiency. For such devices the ideal system should endow the liquid state with a density of redox species close to the solid state. Here we report an approach based on biredox ionic liquids to achieve bulk-like redox density at liquid-like fast kinetics. The cation and anion of these biredox ionic liquids bear moieties that undergo very fast reversible redox reactions. As a first demonstration of their potential for high-capacity/high-rate charge storage, we used them in redox supercapacitors. These ionic liquids are able to decouple charge storage from an ion-accessible electrode surface, by storing significant charge in the pores of the electrodes, to minimize self-discharge and leakage current as a result of retaining the redox species in the pores, and to raise working voltage due to their wide electrochemical window.

  7. Antimicrobial activity and cytotoxicity of piperazinium- and guanidinium-based ionic liquids

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Jing; Zhang, Shanshan; Dai, Yitong; Lu, Xiaoxing; Lei, Qunfang; Fang, Wenjun, E-mail: qflei@zju.edu.cn

    2016-04-15

    Highlights: • Twelve piperazinium- and guanidinium-based ionic liquids were synthesized and characterized. • Antimicrobial activities of the ionic liquids against E. coli and S. aureus were investigated. • Cytotoxicity on the rat C6 glioma cells (C6) and human embryonic kidney cells (HEK-293) were evaluated. • The ionic liquids with the [BF{sub 4}]{sup −} anion and with benzene ring on cation exhibit relatively high toxicity. - Abstract: Twelve piperazinium- and guanidinium-based ionic liquids (ILs) were synthesized, and characterized by {sup 1}H nuclear magnetic resonance (NMR), thermal gravimetric analyzer (TGA) and differential scanning calorimetry (DSC). The antimicrobial activity and cytotoxicity have been investigated to provide the information whether the newly synthesized ILs are toxic or not. The antimicrobial effects of these ILs on gram negative and gram positive bacteria are evaluated on the basis of the minimum inhibitory concentration (MIC) measurements. The membrane damages of bacteria in the presence of ILs are observed by scanning electron microscopy (SEM). The cytotoxicity data of the ILs on HEK-293 and C6 cells are obtained by MTT cell viability assay. The disruption of cell cycle is analyzed by the flow cytometry. The results show that most of the ILs exhibit low toxicity, and the ILs with tetrafluoroborate anion and with benzene ring on cation are the species with relatively high toxicity among the studied ILs. The fundamental data and results can provide some useful information for the further studies and applications of the ILs.

  8. Small-Scale Coal-Biomass to Liquids Production Using Highly Selective Fischer-Tropsch Synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Gangwal, Santosh K. [Southern Research Institute, Durham, NC (United States); McCabe, Kevin [Southern Research Institute, Durham, NC (United States)

    2015-04-30

    The research project advanced coal-to-liquids (CTL) and coal-biomass to liquids (CBTL) processes by testing and validating Chevron’s highly selective and active cobalt-zeolite hybrid Fischer-Tropsch (FT) catalyst to convert gasifier syngas predominantly to gasoline, jet fuel and diesel range hydrocarbon liquids, thereby eliminating expensive wax upgrading operations The National Carbon Capture Center (NCCC) operated by Southern Company (SC) at Wilsonville, Alabama served as the host site for the gasifier slip-stream testing/demonstration. Southern Research designed, installed and commissioned a bench scale skid mounted FT reactor system (SR-CBTL test rig) that was fully integrated with a slip stream from SC/NCCC’s transport integrated gasifier (TRIGTM). The test-rig was designed to receive up to 5 lb/h raw syngas augmented with bottled syngas to adjust the H2/CO molar ratio to 2, clean it to cobalt FT catalyst specifications, and produce liquid FT products at the design capacity of 2 to 4 L/day. It employed a 2-inch diameter boiling water jacketed fixed-bed heat-exchange FT reactor incorporating Chevron’s catalyst in Intramicron’s high thermal conductivity micro-fibrous entrapped catalyst (MFEC) packing to efficiently remove heat produced by the highly exothermic FT reaction.

  9. Separation of human tear proteins by high performance liquid chromatography.

    Science.gov (United States)

    Boonstra, A; Kijlstra, A

    1984-12-01

    The optimal conditions for separating human tear proteins by high performance liquid chromatography (HPLC) using a Waters I-125 gel filtration column were investigated. Several elution buffers were tested including phosphate buffer alone and phosphate buffer to which varying amounts of NaCl or 0.1% Tween was added. The combination of phosphate buffer (pH 5.28), 0.5 M NaCl and 0.1% Tween gave the best resolution and a recovery of 90% of the proteins applied. Tear lactoferrin was shown to adhere to the column packing when the molarity of the elution buffer was not high enough. Using optimal conditions, the tear proteins IgA, lactoferrin and lysozyme were identified in distinct peaks after a preparative HPLC run. When used in combination with Schirmer strips as a tear sampling method, HPLC was shown to be a rapid, simple and reproducible way of investigating the composition of tear proteins.

  10. Lightweight Liquid Helium Dewar for High-Altitude Balloon Payloads

    Science.gov (United States)

    Kogut, Alan; James, Bryan; Fixsen, Dale

    2013-01-01

    Astrophysical observations at millimeter wavelengths require large (2-to-5- meter diameter) telescopes carried to altitudes above 35 km by scientific research balloons. The scientific performance is greatly enhanced if the telescope is cooled to temperatures below 10 K with no emissive windows between the telescope and the sky. Standard liquid helium bucket dewars can contain a suitable telescope for telescope diameter less than two meters. However, the mass of a dewar large enough to hold a 3-to-5-meter diameter telescope would exceed the balloon lift capacity. The solution is to separate the functions of cryogen storage and in-flight thermal isolation, utilizing the unique physical conditions at balloon altitudes. Conventional dewars are launched cold: the vacuum walls necessary for thermal isolation must also withstand the pressure gradient at sea level and are correspondingly thick and heavy. The pressure at 40 km is less than 0.3% of sea level: a dewar designed for use only at 40 km can use ultra thin walls to achieve significant reductions in mass. This innovation concerns new construction and operational techniques to produce a lightweight liquid helium bucket dewar. The dewar is intended for use on high-altitude balloon payloads. The mass is low enough to allow a large (3-to-5-meter) diameter dewar to fly at altitudes above 35 km on conventional scientific research balloons without exceeding the lift capability of the balloon. The lightweight dewar has thin (250- micron) stainless steel walls. The walls are too thin to support the pressure gradient at sea level: the dewar launches warm with the vacuum space vented continuously during ascent to eliminate any pressure gradient across the walls. A commercial 500-liter storage dewar maintains a reservoir of liquid helium within a minimal (hence low mass) volume. Once a 40-km altitude is reached, the valve venting the vacuum space of the bucket dewar is closed to seal the vacuum space. A vacuum pump then

  11. A high-temperature quantum spin liquid with polaron spins

    Science.gov (United States)

    Klanjšek, Martin; Zorko, Andrej; Žitko, Rok; Mravlje, Jernej; Jagličić, Zvonko; Biswas, Pabitra Kumar; Prelovšek, Peter; Mihailovic, Dragan; Arčon, Denis

    2017-11-01

    The existence of a quantum spin liquid (QSL) in which quantum fluctuations of spins are sufficiently strong to preclude spin ordering down to zero temperature was originally proposed theoretically more than 40 years ago, but its experimental realization turned out to be very elusive. Here we report on an almost ideal spin liquid state that appears to be realized by atomic-cluster spins on the triangular lattice of a charge-density wave state of 1T-TaS2. In this system, the charge excitations have a well-defined gap of ~0.3 eV, while nuclear quadrupole resonance and muon-spin-relaxation experiments reveal that the spins show gapless QSL dynamics and no long-range magnetic order at least down to 70 mK. Canonical T2 power-law temperature dependence of the spin relaxation dynamics characteristic of a QSL is observed from 200 K to Tf = 55 K. Below this temperature, we observe a new gapless state with reduced density of spin excitations and high degree of local disorder signifying new quantum spin order emerging from the QSL.

  12. Ultrapreconcentration and determination of organophosphorus pesticides in water by solid-phase extraction combined with dispersive liquid-liquid microextraction and high-performance liquid chromatography.

    Science.gov (United States)

    Chen, Junhua; Zhou, Guangming; Deng, Yongli; Cheng, Hongmei; Shen, Jie; Gao, Yi; Peng, Guilong

    2016-01-01

    Solid-phase extraction coupled with dispersive liquid-liquid microextraction was developed as an ultra-preconcentration method for the determination of four organophosphorus pesticides (isocarbophos, parathion-methyl, triazophos and fenitrothion) in water samples. The analytes considered in this study were rapidly extracted and concentrated from large volumes of aqueous solutions (100 mL) by solid-phase extraction coupled with dispersive liquid-liquid microextraction and then analyzed using high performance liquid chromatography. Experimental variables including type and volume of elution solvent, volume and flow rate of sample solution, salt concentration, type and volume of extraction solvent and sample solution pH were investigated for the solid-phase extraction coupled with dispersive liquid-liquid microextraction with these analytes, and the best results were obtained using methanol as eluent and ethylene chloride as extraction solvent. Under the optimal conditions, an exhaustive extraction for four analytes (recoveries >86.9%) and high enrichment factors were attained. The limits of detection were between 0.021 and 0.15 μg/L. The relative standard deviations for 0.5 μg/L of the pesticides in water were in the range of 1.9-6.8% (n = 5). The proposed strategy offered the advantages of simple operation, high enrichment factor and sensitivity and was successfully applied to the determination of four organophosphorus pesticides in water samples. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Real Time, Non-intrusive Detection of Liquid Nitrogen in Liquid Oxygen (LOX) at High Pressure and High Flow Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Technical Abstract The Stennis Space Center (SSC) needs the sensors that are capable and can be operated in liquid oxygen (LOX) and or liquid hydrogen (LH2)...

  14. Real time, Non-intrusive Detection of Liquid Nitrogen in Liquid Oxygen (LOX) at High Pressure and High Flow Project

    Data.gov (United States)

    National Aeronautics and Space Administration — SSC needs the sensors that are capable and can be operated in liquid oxygen (LOX) and or liquid hydrogen (LH2) cryogenic environment to improve SSC cryogenic...

  15. Method and apparatus using an active ionic liquid for algae biofuel harvest and extraction

    Science.gov (United States)

    Salvo, Roberto Di; Reich, Alton; Dykes, Jr., H. Waite H.; Teixeira, Rodrigo

    2012-11-06

    The invention relates to use of an active ionic liquid to dissolve algae cell walls. The ionic liquid is used to, in an energy efficient manner, dissolve and/or lyse an algae cell walls, which releases algae constituents used in the creation of energy, fuel, and/or cosmetic components. The ionic liquids include ionic salts having multiple charge centers, low, very low, and ultra low melting point ionic liquids, and combinations of ionic liquids. An algae treatment system is described, which processes wet algae in a lysing reactor, separates out algae constituent products, and optionally recovers the ionic liquid in an energy efficient manner.

  16. Antioxidant and Immunity Activities of Fufang Kushen Injection Liquid

    Directory of Open Access Journals (Sweden)

    Tie-Nan Bi

    2012-05-01

    Full Text Available We investigated the effects of Fufang Kushen Injection Liquid (FFKSIL on gastric immunity and oxidant-antioxidant status during N-methyl-N′-nitro-N-nitroso-guanidine (MNNG-induced gastric carcinogenesis. The extent of lipid peroxidation and the levels of reduced glutathione (GSH and activities of the GSH-dependent enzymes superoxide dismutase (SOD, catalase (CAT and glutathione peroxidase (GSH-Px were used to monitor the peroxidative balance. Enhanced lipid peroxidation in the gastric cancer animals was accompanied by significant decreases in the activities of GSH, GPx, GST and GR. Administration of FFKSIL significantly enhanced serum IgA, IgG, IgM, IL-2, IL-4 and IL-10 levels, decreased serum IL-6 and TNF-α levels, lowered the levels of lipid peroxides and enhanced GSH levels and activities of GSH-dependent enzymes. Our results suggest that FFKSIL blocks experimental gastric carcinogenesis by protecting against carcinogen-induced oxidative damage and improving immunity activity.

  17. Heterogeneous fragmentation of metallic liquid microsheet with high velocity gradient

    Science.gov (United States)

    An-Min, He; Pei, Wang; Jian-Li, Shao

    2016-01-01

    Large-scale molecular dynamics simulations are performed to study the fragmentation of metallic liquid sheets with high velocity gradient. Dynamic fragmentation of the system involves the formation of a network of fragments due to the growth and coalescence of holes, decomposition of the network into filaments, and further breakup of the filaments into spherical clusters. The final size distribution of the fragmented clusters in the large volume limit is found to obey a bilinear exponential form, which is resulted from the heterogeneous breakup of quasi-cylindrical filaments. The main factors contributing to fragmentation heterogeneity are introduced, including strain rate inhomogeneity and matter distribution nonuniformity of fragments produced during decomposition of the network structure. Project supported by the Science and Technology Development Foundation of China Academy of Engineering Physics (Grant Nos. 2013A0201010 and 2015B0201039) and the National Natural Science Foundation of China (Grant No. 11402032).

  18. [Determination of amygdalin in hawthorn by high performance liquid chromatography].

    Science.gov (United States)

    Lü, Weifeng; Ding, Mingyu

    2005-09-01

    A suitable method for extraction of amygdalin from hawthorn has been established. At first, the lipophilic components were removed with petroleum ether by ultrasonic extraction. The amygdalin was then extracted by methanol in a Soxhlet's apparatus. For quantitation, a high performance liquid chromatographic method was developed by using a reversed-phase C18 column, mobile phase of methanol-water (15:85, v/v) and a detection wavelengh of 215 nm. It can be concluded that the content of amygdalin is higher in the seeds than that in the hawthorn powder without the seeds and the yield of amygdalin is higher in the hawthorn pieces than that in the hawthorn powder.

  19. Alcoholic fermentation process control by high-performance liquid chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Morawski, J.; Dincer, A.K.; Ivie, K.

    1983-02-01

    In large-scale fermentation for energy production high-performance liquid chromatography (HPLC) provides an accurate method of monitoring the original oligosaccharides and polysaccharides, as well as their hydrolysis to fermentable monosaccharides. Also measuring the saccharide and alcohol content of the fermentation vat allows overseeing of the process, providing the capability of allowing the fermentation to proceed to the most economical level prior to distillation. Another application for HPLC in a large-scale fermentation for energy is to analyze the stillage for its ethanol content during distillation, in order to observe the efficiency of the still. HPLC can separate and detect very low levels, (i.e., 100 parts per million), of ethanol to yield information concerning the distillation process. These capabilities indicate that HPLC is an extremely useful efficient instrument to the fermentation industries. (Refs. 2).

  20. Development of a liquid Pb-Bi target for high-power ISOL facilities

    Energy Technology Data Exchange (ETDEWEB)

    Houngbo, D., E-mail: dhoungbo@sckcen.be [Belgian Nuclear Research Centre (SCK-CEN), Boeretang 200, B-2400 Mol (Belgium); Department of Flow, Heat and Combustion Mechanics, Ghent University (UGent), St.-Pietersnieuwstraat 41, B-9000 Gent (Belgium); Bernardes, A.P. [CERN, 1211 Geneva 23 (Switzerland); David, J.C. [CEA/Saclay, 91191 Gif-sur-Yvette cedex (France); Delonca, M. [CERN, 1211 Geneva 23 (Switzerland); IRTES-M3M & IRTES-LERMPS, Université de Technologie de Belfort-Montbeliard, 90010 Belfort Cedex (France); Kravalis, K. [Institute of Physics of University of Latvia (IPUL), 32 Miera iela, Salaspils LV-2169 (Latvia); Lahiri, S. [Saha Institute of Nuclear Physics 1/AF Bidhannagar, Kolkata 700064 (India); Losito, R.; Maglioni, C. [CERN, 1211 Geneva 23 (Switzerland); Marchix, A. [CEA/Saclay, 91191 Gif-sur-Yvette cedex (France); Mendonca, T.M. [CERN, 1211 Geneva 23 (Switzerland); Popescu, L. [Belgian Nuclear Research Centre (SCK-CEN), Boeretang 200, B-2400 Mol (Belgium); Schumann, D. [Paul Scherrer Institute (PSI), 5232 Villigen PSI (Switzerland); Schuurmans, P. [Belgian Nuclear Research Centre (SCK-CEN), Boeretang 200, B-2400 Mol (Belgium); Stora, T.; Vollaire, J. [CERN, 1211 Geneva 23 (Switzerland); Vierendeels, J. [Department of Flow, Heat and Combustion Mechanics, Ghent University (UGent), St.-Pietersnieuwstraat 41, B-9000 Gent (Belgium)

    2016-06-01

    This paper describes some R&D activities conducted in support of the design and safe operation of a high-power liquid Pb-Bi target within the LIEBE (Liquid Eutectic Lead Bismuth Loop Target for EURISOL) project. The target material is lead bismuth eutectic (LBE) which also acts as a primary coolant. As a consequence of interaction of the highly pulsed 1.4-GeV protons at ISOLDE with the target, heat powers of the order of 2 GW would be instantaneously deposited in the target during a bunch. Considerable R&D effort is thus required to demonstrate its continued coolability and structural integrity. This paper mainly reports on the conjugate flow (CFD) and heat deposition (Monte Carlo) calculations, not accounting for Fluid–Structure Interactions.

  1. Rapid determination of lipophilic vitamins in human serum by ultra-high performance liquid chromatography using a fluorinated column and high-throughput miniaturized liquid-liquid extraction.

    Science.gov (United States)

    Cervinkova, Barbora; Krcmova, Lenka Kujovska; Klabackova, Sava; Solichova, Dagmar; Solich, Petr

    2017-09-01

    A high-throughput miniaturized liquid-liquid extraction procedure followed by a simple ultra-high performance liquid chromatography method coupled with fluorescence detection for bioanalytical analysis of all tocopherol isomers and retinol in human serum has been developed and validated. In the extraction procedure, a synthetic internal standard tocol was used, which does not occur in the human body. The separation of structurally related vitamins was achieved using a new generation of pentafluorophenyl propyl core-shell stationary phase with elution using methanol and an aqueous solution of ammonium acetate. The fluorescence of retinol and tocopherol isomers was detected at λex  = 325, 295 nm and λem  = 480, 325 nm, respectively. The rapid baseline separation of all analytes was accomplished within 4.0 min. The sensitivity of method was demonstrated with lower limits of quantification: retinol 0.01 μM, α-tocopherol 0.38 μM, β-tocopherol 0.18 μM, γ-tocopherol 0.14 μM, and δ-tocopherol 0.01 μM. Possible application of this method in clinical practice was confirmed by the analysis of human serum samples from healthy volunteers. Finally, the simultaneous determination of retinol and all tocopherol isomers in human serum can enable the clarification of their role in metabolism and in diseases such as cancer. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Fluorine-functionalized ionic liquids with high oxygen solubility

    OpenAIRE

    Vanhoutte, Gijs; Hojniak, Sandra; Bardé, Fanny; Binnemans, Koen; Fransaer, Jan

    2018-01-01

    Eight fluorine-functionalized ionic liquids were synthesized and the oxygen solubility was compared to commercial ionic liquids without the extra fluorinated chain. The concentration of dissolved oxygen increased with the fluorine content of the alkyl chain, which can be attached either to the cation or the anion. This approach maintains the freedom to design an ionic liquid for a specific application, while at the same time the oxygen solubility is increased.

  3. Antioxidant activity assays on-line with liquid chromatography

    NARCIS (Netherlands)

    Niederlander, Harm A. G.; van Beek, Teris A.; Bartasiute, Aiste; Koieva, Irina I.

    2008-01-01

    Screening for antioxidants requires simple in vitro model systems to investigate antioxidant activity. High resolution screening (HRS), combining a separation technique like HPLC with fast post-column (bio)chemical detection can rapidly pinpoint active compounds in complex mixtures. In this paper

  4. Towards Chip Scale Liquid Chromatography and High Throughput Immunosensing

    Energy Technology Data Exchange (ETDEWEB)

    Ni, Jing [Iowa State Univ., Ames, IA (United States)

    2000-09-21

    This work describes several research projects aimed towards developing new instruments and novel methods for high throughput chemical and biological analysis. Approaches are taken in two directions. The first direction takes advantage of well-established semiconductor fabrication techniques and applies them to miniaturize instruments that are workhorses in analytical laboratories. Specifically, the first part of this work focused on the development of micropumps and microvalves for controlled fluid delivery. The mechanism of these micropumps and microvalves relies on the electrochemically-induced surface tension change at a mercury/electrolyte interface. A miniaturized flow injection analysis device was integrated and flow injection analyses were demonstrated. In the second part of this work, microfluidic chips were also designed, fabricated, and tested. Separations of two fluorescent dyes were demonstrated in microfabricated channels, based on an open-tubular liquid chromatography (OT LC) or an electrochemically-modulated liquid chromatography (EMLC) format. A reduction in instrument size can potentially increase analysis speed, and allow exceedingly small amounts of sample to be analyzed under diverse separation conditions. The second direction explores the surface enhanced Raman spectroscopy (SERS) as a signal transduction method for immunoassay analysis. It takes advantage of the improved detection sensitivity as a result of surface enhancement on colloidal gold, the narrow width of Raman band, and the stability of Raman scattering signals to distinguish several different species simultaneously without exploiting spatially-separated addresses on a biochip. By labeling gold nanoparticles with different Raman reporters in conjunction with different detection antibodies, a simultaneous detection of a dual-analyte immunoassay was demonstrated. Using this scheme for quantitative analysis was also studied and preliminary dose-response curves from an immunoassay of a

  5. Structure and Dynamics of Low-Density and High-Density Liquid Water at High Pressure.

    Science.gov (United States)

    Fanetti, Samuele; Lapini, Andrea; Pagliai, Marco; Citroni, Margherita; Di Donato, Mariangela; Scandolo, Sandro; Righini, Roberto; Bini, Roberto

    2014-01-02

    Liquid water has a primary role in ruling life on Earth in a wide temperature and pressure range as well as a plethora of chemical, physical, geological, and environmental processes. Nevertheless, a full understanding of its dynamical and structural properties is still lacking. Water molecules are associated through hydrogen bonds, with the resulting extended network characterized by a local tetrahedral arrangement. Two different local structures of the liquid, called low-density (LDW) and high-density (HDW) water, have been identified to potentially affect many different chemical, biological, and physical processes. By combining diamond anvil cell technology, ultrafast pump-probe infrared spectroscopy, and classical molecular dynamics simulations, we show that the liquid structure and orientational dynamics are intimately connected, identifying the P-T range of the LDW and HDW regimes. The latter are defined in terms of the speeding up of the orientational dynamics, caused by the increasing probability of breaking and reforming the hydrogen bonds.

  6. High-performance liquid chromatography with photodiode array detection and chemometrics method for the analysis of multiple components in the traditional Chinese medicine Shuanghuanglian oral liquid.

    Science.gov (United States)

    Li, Bao Qiong; Chen, Jing; Li, Jiao Jiao; Wang, Xue; Zhai, Hong Lin; Zhang, Xiao Yun

    2015-12-01

    Shuanghuanlian oral liquid, a traditional Chinese medicine preparation, is a mixture of three herbs (Flos Lonicerae, Radix Scutellariae and Fructus Forsythiae). In this study, the quantitative analysis of three main active compounds, chlorogenic acid, forsythin and baicalin in samples from different manufacturers was performed rapidly by high-performance liquid chromatography coupled with photodiode array detection followed by Contour Projection coupled to stepwise regression treatment of the obtained three-dimensional spectra in which the partial overlap between adjacent target components existed. The method was validated for linearity (R>0.9940), precision (RSDstepwise regression offered an accurate, simple, low-cost and eco-friendly way for the rapid quantitative analysis of Shuanghuanlian oral liquid samples. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Feeding of liquid silicon for high performance multicrystalline silicon with increased ingot height and homogenized resistivity

    Science.gov (United States)

    Krenckel, Patricia; Riepe, Stephan; Schindler, Florian; Strauch, Theresa

    2017-04-01

    Feeding of liquid silicon during the directional solidification process is a promising opportunity for cost reduction by increased throughput and improved material homogeneity due to constant resistivity over ingot height. In this work, a liquid feeding apparatus was developed for an industrial type directional solidification furnace. One n-type G2 sized High Performance multicrystalline ingot with liquid feeding of additional 14 kg of undoped silicon feedstock was crystallized. The resistivity was kept within a range of ±0.1 Ω cm of the target resistivity during the feeding sequence. A smaller mean grain area growth was observed during feeding, whereas the area fraction of recombination active dislocation structures was as low as in a reference ingot. Increased interstitial oxygen and substitutional carbon concentrations were measured for the ingot with liquid feeding. The measured mean bulk lifetime of 190 μs for passivated wafers in the feeding sequence can probably be increased by further pre-melting crucible improvements. For this laboratory experiment, energy reductions of 2% per wafer and time savings of 16% per wafer were realized.

  8. Effect of substrate interferences from high-density polyethylene on association of simulated ignitable liquid residues with the corresponding liquid.

    Science.gov (United States)

    Prather, Kaitlin R; Towner, Suzanne E; McGuffin, Victoria L; Smith, Ruth Waddell

    2014-01-01

    The effect of substrate interferences from high-density polyethylene (HDPE) on the ability to associate an ignitable liquid residue with the corresponding liquid standard, using statistical procedures, is demonstrated. Gasoline, kerosene, and lighter fluid, at three different evaporation levels, were spiked onto HDPE and subsequently burned to generate simulated ignitable liquid residues (ILRs). Samples were extracted using a passive headspace procedure and analyzed by gas chromatography-mass spectrometry. The total ion chromatograms were subjected to data pretreatment procedures prior to principal components analysis and Pearson product moment correlation. Using the combination of these statistical procedures, simulated ILRs were successfully associated with the corresponding liquid type, despite the presence of compounds inherent to the HDPE substrate, as well as those resulting from pyrolysis of the substrate. © 2013 American Academy of Forensic Sciences.

  9. Instrumental liquid chromatography: a practical manual on high-performance liquid chromatographic methods

    National Research Council Canada - National Science Library

    Parris, N. A

    1976-01-01

    Available texts on liquid chromatography have tended to emphasize the developments in the theoretical understanding of the technique and methodology or to list numerous applications, complete with experimental details...

  10. Liquid Marbles Stabilized by Fluorine-Bearing Cyclomatrix Polyphosphazene Particles and Their Application as High-Efficiency Miniature Reactors.

    Science.gov (United States)

    Wei, Wei; Lu, Rongjie; Ye, Weitao; Sun, Jianhua; Zhu, Ye; Luo, Jing; Liu, Xiaoya

    2016-02-23

    Increasing attention has been paid to fabricate multifunctional stabilizers of liquid marbles for expanding their application. Here, a kind of hydrophobic cyclomatrix polyphosphazene particles (PZAF) were facilely prepared using a one-step precipitation polycondensation of hexachlorocyclotriphosphazene and 4,4'-(hexafluoroisopropylidene)diphenol, and their ability to stabilize liquid marbles was first investigated. The Ag nanoparticle-decorated PZAF particles (Ag/PZAF) were then fabricated by an in situ reduction of silver nitrate onto PZAF particles and used to construct catalytic liquid marbles. The results revealed that the reduction of methylene blue (MB) in aqueous solution by sodium borohydride could be highly efficiently catalyzed in the catalytic liquid marbles, even with a large volume. An excellent cycle use performance of the catalytic liquid marbles without losing catalytic efficiency was also present. The high catalytic activity is mainly attributed to the uniform immobilization of Ag nanoparticles onto PZAF particles and the adsorption behavior of PZAF particles toward MB, which may play an effect on allowing high catalytic surface area and effective accelerating the mass transfer of MB to the Ag catalytic active sites, respectively. Therefore, the combination of Ag nanoparticles with PZAF particles has been demonstrated clearly to be a facile and effective strategy to obtain the functional stabilizer for preparing the catalytic liquid marbles as promising miniature reactors used in heterogeneous catalytic reactions.

  11. Antipolar ordering of topological defects in active liquid crystals

    Science.gov (United States)

    Oza, Anand U.; Dunkel, Jörn

    2016-09-01

    ATP-driven microtubule-kinesin bundles can self-assemble into two-dimensional active liquid crystals (ALCs) that exhibit a rich creation and annihilation dynamics of topological defects, reminiscent of particle-pair production processes in quantum systems. This recent discovery has sparked considerable interest but a quantitative theoretical description is still lacking. We present and validate a minimal continuum theory for this new class of active matter systems by generalizing the classical Landau-de Gennes free-energy to account for the experimentally observed spontaneous buckling of motor-driven extensile microtubule bundles. The resulting model agrees with recently published data and predicts a regime of antipolar order. Our analysis implies that ALCs are governed by the same generic ordering principles that determine the non-equilibrium dynamics of dense bacterial suspensions and elastic bilayer materials. Moreover, the theory manifests an energetic analogy with strongly interacting quantum gases. Generally, our results suggest that complex nonequilibrium pattern-formation phenomena might be predictable from a few fundamental symmetry-breaking and scale-selection principles.

  12. Sensitive and Selective Reversed-Phase High Performance Liquid ...

    African Journals Online (AJOL)

    Methods: Pre-column sample clean-up was carried out by liquid-liquid extraction of the analytes with chloroform: isopropanol (70:30) solution after alkalization of 1000 μL sample and spiking of internal standard, morphine. The samples were chromatographed in a reversed-phase (C-18) ultra sphere silica (5μm particle size ...

  13. High power laser having a trivalent liquid host

    Science.gov (United States)

    Ault, Earl R.

    2005-08-16

    A laser having a lasing chamber and a semiconductor pumping device with trivalent titanium ions dissolved in a liquid host within the lasing chamber. Since the host is a liquid, it can be removed from the optical cavity when it becomes heated avoiding the inevitable optical distortion and birefringence common to glass and crystal hosts.

  14. High average power laser using a transverse flowing liquid host

    Science.gov (United States)

    Ault, Earl R.; Comaskey, Brian J.; Kuklo, Thomas C.

    2003-07-29

    A laser includes an optical cavity. A diode laser pumping device is located within the optical cavity. An aprotic lasing liquid containing neodymium rare earth ions fills the optical cavity. A circulation system that provides a closed loop for circulating the aprotic lasing liquid into and out of the optical cavity includes a pump and a heat exchanger.

  15. Liquid Oxygen Liquid Acquisition Device Bubble Point Tests with High Pressure LOX at Elevated Temperatures

    Science.gov (United States)

    Jurns, John M.; Hartwig, Jason W.

    2011-01-01

    When transferring propellant in space, it is most efficient to transfer single phase liquid from a propellant tank to an engine. In earth s gravity field or under acceleration, propellant transfer is fairly simple. However, in low gravity, withdrawing single-phase fluid becomes a challenge. A variety of propellant management devices (PMD) are used to ensure single-phase flow. One type of PMD, a liquid acquisition device (LAD) takes advantage of capillary flow and surface tension to acquire liquid. The present work reports on testing with liquid oxygen (LOX) at elevated pressures (and thus temperatures) (maximum pressure 1724 kPa and maximum temperature 122K) as part of NASA s continuing cryogenic LAD development program. These tests evaluate LAD performance for LOX stored in higher pressure vessels that may be used in propellant systems using pressure fed engines. Test data shows a significant drop in LAD bubble point values at higher liquid temperatures, consistent with lower liquid surface tension at those temperatures. Test data also indicates that there are no first order effects of helium solubility in LOX on LAD bubble point prediction. Test results here extend the range of data for LOX fluid conditions, and provide insight into factors affecting predicting LAD bubble point pressures.

  16. Determination of Finasteride in Tablets by High Performance Liquid Chromatography

    Directory of Open Access Journals (Sweden)

    K. Basavaiah

    2007-01-01

    Full Text Available A rapid, highly sensitive high performance liquid chromatographic method has been developed for the determination of finasteride(FNS in bulk drug and in tablets. FNS was eluted from a ODS C18 reversed phase column at laboratory temperature (30 ± 2°C with a mobile phase consisting of methanol and water (80+20 at a flow rate of 1 mL min-1 with UV detection at 225 nm. The retention time was ∼ 6.1 min and each analysis took not more than 10 min. Quantitation was achieved by measurement of peak area without using any internal standard. Calibration graph was linear from 2.0 to 30 μg mL-1 with limits of detection (LOD and quantification (LOQ being 0.2 and 0.6 μg mL-1, respectively. The method was validated according to the current ICH guidelines. Within-day co efficients of variation (CV ranged from 0.31 to 0.69% and between-day CV were in the range 1.2-3.2%. Recovery of FNS from the pharmaceutical dosage forms ranged from 97.89 – 102.9 with CV of 1.41-4.13%. The developed method was compared with the official method for FNS determination in its tablet forms.

  17. Effect of high pressure treatment on liquid whole egg

    Science.gov (United States)

    Németh, Csaba; Dalmadi, István; Mráz, Balázs; Friedrich, László; Zeke, Ildikó; Juhász, Réka; Suhajda, Ágnes; Balla, Csaba

    2012-06-01

    In our tests, we artificially infected liquid whole egg samples with Salmonella enteritidis, Listeria monocytogenes, and Staphylococcus aureus bacteria, and then treated the samples in "Food Lab900" high hydrostatic pressure (HHP) instrument for 3-17 min at 200-400 MPa. Subsequently, the change of the viable cell count of the specific bacteria has been tested. In addition to the samples infected with various bacteria, non-infected samples were also treated in each test and the change in viable cell count, colour and viscosity of the samples upon the effect of the treatment. In summary, it can be concluded that in each test of our investigations, the viable cell count of S. enteritidis critical for egg products is reduced significantly, while the reduction of the total viable cell count was around two magnitudes. Additionally, based on our results, microbial destruction, reduction of enthalpy (denaturation of egg white) caused by the treatment at HPP, and colour change are primarily affected by the pressure level, while the changes in rheological properties are also significantly affected by the duration of high pressure treatment (p<0.05).

  18. Active liquid-crystal deflector and lens with Fresnel structure

    Science.gov (United States)

    Shibuya, Giichi; Yamano, Shohei; Yoshida, Hiroyuki; Ozaki, Masanori

    2017-02-01

    A new type of tunable Fresnel deflector and lens composed of liquid crystal was developed. Combined structure of multiple interdigitated electrodes and the high-resistivity (HR) layer implements the saw-tooth distribution of electrical potential with only the planar surfaces of the transparent substrates. According to the numerical calculation and design, experimental devices were manufactured with the liquid crystal (LC) material sealed into the sandwiched flat glass plates of 0.7 mm thickness with rubbed alignment layers set to an anti-parallel configuration. Fabricated beam deflector with no moving parts shows the maximum tilt angle of +/-1.3 deg which can apply for optical image stabilizer (OIS) of micro camera. We also discussed and verified their lens characteristics to be extended more advanced applications. Transparent interdigitated electrodes were concentrically aligned on the lens aperture with the insulator gaps under their boundary area. The diameter of the lens aperture was 30 mm and the total number of Fresnel zone was 100. Phase retardation of the beam wavefront irradiated from the LC lens device can be evaluated by polarizing microscope images with a monochromatic filter. Radial positions of each observed fringe are plotted and fitted with 2nd degree polynomial approximation. The number of appeared fringes is over 600 in whole lens aperture area and the correlation coefficients of all approximations are over 0.993 that seems enough ideal optical wavefront. The obtained maximum lens powers from the approximations are about +/-4 m-1 which was satisfied both convex and concave lens characteristics; and their practical use for the tunable lens grade eyeglasses became more prospective.

  19. Graphene/polydopamine-modified polytetrafluoroethylene microtube for the sensitive determination of three active components in Fructus Psoraleae by online solid-phase microextraction with high-performance liquid chromatography.

    Science.gov (United States)

    Zhang, Wenpeng; Zhou, Wei; Chen, Zilin

    2014-11-01

    Determination of bioactive compounds in traditional Chinese medicines and biological samples is usually interfered with by coexisting components in matrices. In this work, we prepared novel multilayer functional graphene/polydopamine-modified polytetrafluoroethylene microtube for selective solid-phase microextraction of three bioactive compounds in Fructus Psoraleae. Functional graphene/polydopamine-modified polytetrafluoroethylene microtube showed good extraction efficiency toward bavachin, isobavachalcone, and bavachinin; enrichment from 357- to 737-fold was obtained for these compounds. For qualitative analysis, an online solid-phase microextraction with high-performance liquid chromatography method was developed, which showed low limits of detection of 0.02 ng/mL by using UV detection, which is significantly more sensitive than previously reported methods. The proposed method has been used to determine bavachin, isobavachalcone, and bavachinin in Fructus Psoraleae, the contents of three compounds were quantified to be 64.0, 324.0, and 384.5 μg/g; recoveries were 93.4-101.1%. The proposed method has also been applied to determine bavachin, isobavachalcone, and bavachinin in rat plasma samples after oral administration of Fructus Psoraleae. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Sensitive determination of nitrophenol isomers by reverse-phase high-performance liquid chromatography in conjunction with liquid-liquid extraction

    Science.gov (United States)

    A method for the highly sensitive determination of 2-, 3- and 4- nitrophenols was developed using reverse-phase high-performance liquid chromatography (RP-HPLC) with a UV photodiode array detector. Using a reverse-phase column and 40% aqueous acetonitrile as an eluent (i.e. isocratic elution), the i...

  1. Photoinduced reactivity of liquid ethanol at high pressure.

    Science.gov (United States)

    Ceppatelli, Matteo; Fanetti, Samuele; Citroni, Margherita; Bini, Roberto

    2010-12-02

    The room temperature photoinduced reactivity of liquid ethanol has been studied as a function of pressure up to 1.5 GPa by means of a diamond anvil cell. Exploiting the dissociative character of the lowest electronic excited states, reached through two-photon absorption of near-UV photons (350 nm), irreversible reactive processes have been triggered in the pure system. The active species are radicals forming along two main dissociation channels involving the split of C-O and O-H bonds. The characterization of the reaction products has been performed by in situ FTIR and Raman spectroscopy. At pressures of a few megapascals, molecular hydrogen is the main reaction product, an important issue in the framework of environmentally friendly synthesis of this energetic vector. In the gigapascal range, the main products are ethane, 2-butanol, 2,3-butanediol, 1,1-diethoxyethane, and some carbonylic compounds. The relative amount of these species changes with pressure reflecting the nature of the radicals formed in the photodissociation process. As the pressure increases, the processes requiring a greater molecularity are favored, whereas those requiring internal rearrangements are inhibited. Disproportion products like CH(4), H(2)O, and CO(2) increase when the amount of ethanol decreases due to the reaction, becoming the main products only when ethanol is exhausted.

  2. Saffron authentication based on liquid chromatography high resolution tandem mass spectrometry and multivariate data analysis.

    Science.gov (United States)

    Rubert, Josep; Lacina, Ondrej; Zachariasova, Milena; Hajslova, Jana

    2016-08-01

    Saffron is one of the oldest and most expensive spices, which is often target of fraudulent activities. In this research, a new strategy of saffron authentication based on metabolic fingerprinting was developed. In the first phase, a solid liquid extraction procedure was optimized, the main aim was to isolate as maximal representation of small molecules contained in saffron as possible. In the second step, a detection method based on liquid chromatography coupled with high-resolution mass spectrometry was developed. Initially, principal component analysis (PCA) revealed clear differences between saffron cultivated and packaged in Spain, protected designation of origin (PDO), and saffron packaged in Spain of unknown origin, labeled Spanish saffron. Afterwards, orthogonal partial least square discriminant analysis (OPLS-DA) was favorably used to discriminate between Spanish saffron. The tentative identification of markers showed glycerophospholipids and their oxidized lipids were significant markers according to their origin. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. A prediction method for entrained liquid fraction in adiabatic gas-liquid flow at high reduced pressure

    Science.gov (United States)

    Minko, M. V.; Yagov, V. V.

    2017-10-01

    A goal of the study is development of an approximate but well-grounded model of entrainment/deposition processes in annular two-phase flow at high reduced pressures (p/pcr>0.45). Nakazatomi and Sekoguchi (1996) have presented the unique experimental data on liquid distribution between the core and the film in air/water two-phase flow at high pressures, up to 20 MPa; at pressures higher 10 MPa the data feature with abnormally high fraction of entrained liquid and manifest very strong deviation from any known empirical correlations, including the recent one by Cioncolini and Thome (2012). In deducing the approximate model of droplets entrainment, we used the experimental observations, according to which a liquid film becomes thin and smooth at high reduced pressures. A plenty of tiny droplets detach from the liquid film surface at the points, which spacing is determined as a length scale in Weber number for gas flow. This spacing and the liquid film thickness are assumed being the parameters controlling a droplet departure diameter. These assumptions allow developing an equation for calculating entrainment intensity at high reduced pressures. A balance between the flows of droplets entrainment and deposition due to turbulent diffusion corresponds to the dynamic equilibrium. The equation based on this balance contains one unknown numerical factor and allows one to calculate liquid distribution in a channel cross section. Comparing the calculation results with the experimental data for the water–air flows at high reduced pressures (more than 0.45) has shown their good agreement at the universal value of the numerical constant.

  4. Wearable Wide-Range Strain Sensors Based on Ionic Liquids and Monitoring of Human Activities

    Directory of Open Access Journals (Sweden)

    Shao-Hui Zhang

    2017-11-01

    Full Text Available Wearable sensors for detection of human activities have encouraged the development of highly elastic sensors. In particular, to capture subtle and large-scale body motion, stretchable and wide-range strain sensors are highly desired, but still a challenge. Herein, a highly stretchable and transparent stain sensor based on ionic liquids and elastic polymer has been developed. The as-obtained sensor exhibits impressive stretchability with wide-range strain (from 0.1% to 400%, good bending properties and high sensitivity, whose gauge factor can reach 7.9. Importantly, the sensors show excellent biological compatibility and succeed in monitoring the diverse human activities ranging from the complex large-scale multidimensional motions to subtle signals, including wrist, finger and elbow joint bending, finger touch, breath, speech, swallow behavior and pulse wave.

  5. Determination of saffron quality by high-performance liquid chromatography.

    Science.gov (United States)

    Valle García-Rodríguez, M; Serrano-Díaz, Jéssica; Tarantilis, Petros A; López-Córcoles, Horacio; Carmona, Manuel; Alonso, Gonzalo L

    2014-08-13

    The aim of this work was to propose a high-performance liquid chromatography with diode array detection (HPLC-DAD) method for determining the three main compounds responsible for determining the quality of saffron (crocetin esters, picrocrocin, and safranal) by preparing an aqueous extract according to the ISO 3632 standard to solve the difficulty that this standard has for aroma and taste determination by ultraviolet-visible spectroscopy. Toward this aim, laboratory-isolated picrocrocin, a safranal standard with a purity of ≥ 88%, trans-crocetin di(β-D-gentiobiosyl) ester (trans-4-GG) and trans-crocetin (β-D-glucosyl)-(β-D-gentiobiosyl) ester (trans-3-Gg) standards, both with a purity of ≥ 99%, and 50 different saffron spice samples from Italy, Iran, Greece, and Spain were used in the intralaboratory validation of the HPLC method. The analytical method proposed was adequate in terms of linearity, selectivity, sensitivity, and accuracy for determining the three foremost parameters that define the quality of saffron using only a saffron solution prepared according to the ISO 3632 standard.

  6. Transport properties of liquid metal hydrogen under high pressures

    Science.gov (United States)

    Brown, R. C.; March, N. H.

    1972-01-01

    A theory is developed for the compressibility and transport properties of liquid metallic hydrogen, near to its melting point and under high pressure. The interionic force law is assumed to be of the screened Coulomb type, because hydrogen has no core electrons. The random phase approximation is used to obtain the structure factor S(k) of the system in terms of the Fourier transform of this force law. The long wavelenth limit of the structure factor S(o) is related to the compressibility, which is much lower than that of alkali metals at their melting points. The diffusion constant at the melting point is obtained in terms of the Debye frequency, using a frequency spectrum analogous with the phonon spectrum of a solid. A similar argument is used to obtain the combined shear and bulk viscosities, but these depend also on S(o). The transport coefficients are found to be about the same size as those of alkali metals at their melting points.

  7. Unique self-assembly behavior of a triblock copolymer and fabrication of catalytically active gold nanoparticle/polymer thin films at the liquid/liquid interface

    Energy Technology Data Exchange (ETDEWEB)

    Shang, Ke; Geng, Yuanyuan; Xu, Xingtao [Key Laboratory for Colloid and Interface Chemistry of Education Ministry, Shandong University, Jinan 250100 (China); Wang, Changwei [Environmental Monitoring Center of Shandong Province, Jinan 250013 (China); Lee, Yong-Ill [Anastro Laboratory, Department of Chemistry, Changwon National University, Changwon 641-773 (Korea, Republic of); Hao, Jingcheng [Key Laboratory for Colloid and Interface Chemistry of Education Ministry, Shandong University, Jinan 250100 (China); Liu, Hong-Guo, E-mail: hgliu@sdu.edu.cn [Key Laboratory for Colloid and Interface Chemistry of Education Ministry, Shandong University, Jinan 250100 (China)

    2014-07-01

    Gold nanoparticle-doped poly(2-vinylpyridine)-block-polystyrene-block-poly(2-vinylpyridine) (P2VP-b-PS-b-P2VP) thin films were prepared at the planar liquid/liquid interface between the chloroform solution of the polymer and aqueous solution of HAuCl{sub 4}. Transmission electron microscopic (TEM) investigations revealed that foam films composed of microcapsules as well as one-dimensional belts were formed, and numerous Au nanoparticles were incorporated in the walls of the microcapsules and the nanobelts. The walls and the belts have layered structure. The formation mechanism of the foams and the belts was attributed to adsorption of the polymer molecules, combination of the polymer molecules with AuCl{sub 4}{sup −} ions, microphase separation and self-assembly of the composite molecules at the interface. This microstructure is different apparently from those formed in solutions, in casting or spin-coating thin films and at the air/water interface of this triblock copolymer, reflecting unique self-assembly behavior at the liquid/liquid interface. This microstructure is also different from those formed by homo-P2VP and P4VP-b-PS-b-P4VP at the liquid/liquid interface, indicating the effects of molecular structures on the self-assembly behaviors of the polymers. After further treatment by UV-light irradiation and KBH{sub 4} aqueous solution, the gold species were reduced completely, as indicated by UV–vis spectra and X-ray photoelectron spectra (XPS). Thermogravimetric analysis indicated that the composite films have high thermal stability, and the content of gold was estimated to be about 9.1%. These composite films exhibited high catalytic activity for the reduction of 4-nitrophenol by KBH{sub 4} in aqueous solutions. - Highlights: • P2VP-b-PS-b-P2VP formed microcapsules and nanobelts at the liquid/liquid interface. • Its self-assembly behavior differs from P4VP-b-PS-b-P4VP at the interface. • This behavior also differs from those in solution, in film and

  8. Catalytic polymer membranes for high temperature hydrogenation of viscous liquids

    Energy Technology Data Exchange (ETDEWEB)

    Fritsch, D.; Bengtson, G. [GKSS Research Centre Geesthacht GmbH, Institute of Polymer Research, Max-Planck-Str. 1, 21502 Geesthacht (Germany)

    2006-05-15

    Polymeric membranes with high oil fluxes were developed and catalytically activated by a new route of direct calcination of polymeric membranes charged by Pd or Pt catalyst precursors. High concentrations of citric acid mixed with the precursors afforded a decrease of the calcination temperature to 175 C. Membrane reactor tests in the flow through contactor mode displayed high reactivities for sunflower oil hydrogenation. Pt showed a similar activity to Pd catalysts as measured by iodine value and generated about 13% less trans-isomers but 5% more stearic acid at an iodine value of 90. By means of alumina supported catalysts tests of methyl oleate (cis-C18:1) and methyl elaidate (trans-C18:1) hydrogenation exhibited a different pathway of reaction by either isomerization followed by reduction (Pd) or primarily direct reduction to methyl stearate (Pt). (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  9. High breakdown-strength composites from liquid silicone rubbers

    DEFF Research Database (Denmark)

    Vudayagiri, Sindhu; Zakaria, Shamsul Bin; Yu, Liyun

    2014-01-01

    In this paper we investigate the performance of liquid silicone rubbers (LSRs) as dielectric elastomer transducers. Commonly used silicones in this application include room-temperature vulcanisable (RTV) silicone elastomers and composites thereof. Pure LSRs and their composites with commercially...

  10. High Resolution Tracking Devices Based on Capillaries Filled with Liquid Scintillator

    CERN Multimedia

    Bonekamper, D; Vassiltchenko, V; Wolff, T

    2002-01-01

    %RD46 %title\\\\ \\\\The aim of the project is to develop high resolution tracking devices based on thin glass capillary arrays filled with liquid scintillator. This technique provides high hit densities and a position resolution better than 20 $\\mu$m. Further, their radiation hardness makes them superior to other types of tracking devices with comparable performance. Therefore, the technique is attractive for inner tracking in collider experiments, microvertex devices, or active targets for short-lived particle detection. High integration levels in the read-out based on the use of multi-pixel photon detectors and the possibility of optical multiplexing allow to reduce considerably the number of output channels, and, thus, the cost for the detector.\\\\ \\\\New optoelectronic devices have been developed and tested: the megapixel Electron Bombarded CCD (EBCCD), a high resolution image-detector having an outstanding capability of single photo-electron detection; the Vacuum Image Pipeline (VIP), a high-speed gateable pi...

  11. European standardization activities on safety of liquid helium cryostats

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    This talk gives a general overview on the challenges of designing safety units for liquid helium cryostats with regard to existing industry standards. It reviews the work of a national working group that published the technical guideline DIN SPEC 4683 in April 2015, which is dedicated to the particular conditions in liquid helium cryostats. Based on both this guideline and equivalent documents from e.g. CEA, CERN, a working group is being formed at the European Committee for Standardization, associated to CEN/TC 268, which will work on a European standard on safety of liquid helium cryostats. The actual status and the schedule of this project are presented.

  12. Improved activity of a thermophilic cellulase, Cel5A, from Thermotoga maritima on ionic liquid pretreated switchgrass.

    Directory of Open Access Journals (Sweden)

    Zhiwei Chen

    Full Text Available Ionic liquid pretreatment of biomass has been shown to greatly reduce the recalcitrance of lignocellulosic biomass, resulting in improved sugar yields after enzymatic saccharification. However, even under these improved saccharification conditions the cost of enzymes still represents a significant proportion of the total cost of producing sugars and ultimately fuels from lignocellulosic biomass. Much of the high cost of enzymes is due to the low catalytic efficiency and stability of lignocellulolytic enzymes, especially cellulases, under conditions that include high temperatures and the presence of residual pretreatment chemicals, such as acids, organic solvents, bases, or ionic liquids. Improving the efficiency of the saccharification process on ionic liquid pretreated biomass will facilitate reduced enzyme loading and cost. Thermophilic cellulases have been shown to be stable and active in ionic liquids but their activity is typically at lower levels. Cel5A_Tma, a thermophilic endoglucanase from Thermotoga maritima, is highly active on cellulosic substrates and is stable in ionic liquid environments. Here, our motivation was to engineer mutants of Cel5A_Tma with higher activity on 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc] pretreated biomass. We developed a robotic platform to screen a random mutagenesis library of Cel5A_Tma. Twelve mutants with 25-42% improvement in specific activity on carboxymethyl cellulose and up to 30% improvement on ionic-liquid pretreated switchgrass were successfully isolated and characterized from a library of twenty thousand variants. Interestingly, most of the mutations in the improved variants are located distally to the active site on the protein surface and are not directly involved with substrate binding.

  13. High Energy Cutting and Stripping Utilizing Liquid Nitrogen

    Science.gov (United States)

    Hume, Howard; Noah, Donald E.; Hayes, Paul W.

    2005-01-01

    The Aerospace Industry has endeavored for decades to develop hybrid materials that withstand the rigors of mechanized flight both within our atmosphere and beyond. The development of these high performance materials has led to the need for environmentally friendly technologies for material re-work and removal. The NitroJet(TM) is a fluid jet technology that represents an evolution of the widely used, large-scale water jet fluid jet technology. It involves the amalgamation of fluid jet technology and cryogenics technology to create a new capability that is applicable where water jet or abrasive jet (water jet plus entrained abrasive) are not suitable or acceptable because of technical constraints such as process or materials compatibility, environmental concerns and aesthetic or legal requirements. The NitroJet(TM) uses ultra high-pressure nitrogen to cut materials, strip numerous types of coatings such as paint or powder coating, clean surfaces and profile metals. Liquid nitrogen (LN2) is used as the feed stream and is pressurized in two stages. The first stage pressurizes sub cooled LN2 to an intermediate pressure of between 15,000 and 20,000 psi at which point the temperature of the LN2 is about -250 F. The discharge from this stage is then introduced as feed to a dual intensifier system, which boosts the pressure from 15,000 - 20,000 psi up to the maximum operating pressure of 55,000 psi. A temperature of about -220 F is achieved at which point the nitrogen is supercritical. In this condition the nitrogen cuts, strips and abrades much like ultra high-pressure water would but without any residual liquid to collect, remove or be contaminated. Once the nitrogen has performed its function it harmlessly flashes back into the atmosphere as pure nitrogen gas. The system uses heat exchangers to control and modify the temperature of the various intake and discharge nitrogen streams. Since the system is hydraulically operated, discharge pressures can be easily varied over

  14. Simultaneous Determination of Caffeine and Vitamin B6 in Energy Drinks by High-Performance Liquid Chromatography (HPLC)

    Science.gov (United States)

    Leacock, Rachel E.; Stankus, John J.; Davis, Julian M.

    2011-01-01

    A high-performance liquid chromatography experiment to determine the concentration of caffeine and vitamin B6 in sports energy drinks has been developed. This laboratory activity, which is appropriate for an upper-level instrumental analysis course, illustrates the standard addition method and simultaneous determination of two species. (Contains 1…

  15. Improved method for the determination of the cortisol production rate using high-performance liquid chromatography and liquid scintillation counting

    NARCIS (Netherlands)

    van Ingen, H. E.; Endert, E.

    1988-01-01

    Two new methods for the determination of the cortisol production rate using reversed-phase high-performance liquid chromatography are described. One uses ultraviolet detection at 205 nm, the other on-line post-column derivatization with benzamidine, followed by fluorimetric detection. The specific

  16. Investigation of accessibility and reactivity of cellulose pretreated by ionic liquid at high loading.

    Science.gov (United States)

    Endo, Takatsugu; Aung, Ei Mon; Fujii, Shunsuke; Hosomi, Shota; Kimizu, Mitsugu; Ninomiya, Kazuaki; Takahashi, Kenji

    2017-11-15

    High loading of cellulose in ionic liquid (IL) pretreatment is potentially a key technique for cellulose conversion to glucose in biorefining. In this work, to expand the potential use of this high loading technique, the accessibility of microcrystalline cellulose pretreated with an IL across a wide cellulose loading range (5-50mol%) and its relationship with the hydrolytic reactivity were comprehensively investigated. The results show that the estimated cellulose accessibility based on the crystallinity and specific surface area was notably higher in 25mol% loading than that for a conventional loading of 5mol%. Consistently, acid-catalyzed glucose conversion was faster at this high loading, showing that a higher cellulose loading improves the pretreatment efficiency. In contrast, enzymatic hydrolysis was not enhanced by a high cellulose loading. A key difference between the activities in these two hydrolytic reactions is the catalyst size. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Development of a new sample preparation method based on liquid-liquid-liquid extraction combined with dispersive liquid-liquid microextraction and its application on unfiltered samples containing high content of solids.

    Science.gov (United States)

    Farajzadeh, Mir Ali; Abbaspour, Maryam

    2017-11-01

    A new sample preparation method based on liquid-liquid-liquid extraction combined with dispersive liquid-liquid microextraction followed by gas chromatography-flame ionization detection has been reported for the extraction/preconcentration and determination of trace levels of twelve pesticide residues from different samples with high content of solids without filtration. This method consists of a three-phase system including an aqueous phase (sample solution), acetonitrile, and hexane. The extraction mechanism is based on different affinities of the substances from the sample matrices towards each of the involved phase, which provides a high selectivity to the process. In other words, interfering hydrophobic compounds are transferred into hexane and will not be present in the final extract. Furthermore, ionic and polar compounds are retained in the aqueous phase. Therefore, only semi-polar compounds such as the studied pesticides are extracted into acetonitrile. In this method, a homogeneous solution of the aqueous phase and acetonitrile (a water-soluble extraction solvent) forms two clearly separated phases in the presence of sodium sulfate (as a phase separation agent) and simultaneously the analytes are extracted into the fine droplets of the acetonitrile collected on the surface of the aqueous phase. To achieve high enrichment factors, the acetonitrile phase is mixed with 1,2-dibromoethane (as a preconcentration solvent) at µL-level to perform the following dispersive liquid-liquid microextraction procedure. Several parameters that can affect extraction efficiency including kind and volume of extraction solvent, type and concentration of phase separation agent, hexane volume, kind of preconcentration solvent, and ionic strength were studied and optimized. Under the optimal conditions, extraction recoveries were obtained in the range of 53-93% and the calibration curves were linear in wide ranges with correlation coefficients ≥ 0.9983. Intra- (n = 6) and

  18. The active liquid Earth - importance of temporal and spatial variability

    Science.gov (United States)

    Arheimer, Berit

    2016-04-01

    The Planet Earth is indeed liquid and active - 71 percent of its surface is water-covered and this water never rests. Thanks to the water cycle, our planet's water supply is constantly moving from one place to another and from one form to another. Only 2.5% of the water is freshwater and it exists in the air as water vapor; it hits the ground as rain and snow; it flows on the surface from higher to lower altitudes in rivers, lakes, and glaciers; and it flows in the ground in soil, aquifers, and in all living organisms until it reaches the sea. On its way over the Earth's crust, some returns quickly to vapor again, while some is trapped and exposed to many "fill and spill" situations for a long journey. The variability in the water balance is crucial for hydrological understanding and modelling. The water cycle may appear simple, but magnitudes and rates in fluxes are very different from one place to another, resulting from variable drivers such as solar energy, precipitation and gravity in co-evolution with geology, soil, vegetation and fauna. The historical evolution, the temporal fluxes and diversity in space continue to fascinate hydrological scientists. Specific physical processes may be well known, but their boundary conditions, interactions and rate often remain unknown at a specific site and are difficult to monitor in nature. This results in mysterious features where trends in drivers do not match runoff, like the Sahelian Paradox or discharge to the Arctic Ocean. Humans have always interfered with the water cycle and engineering is fundamental for water regulation and re-allocation. Some 80% of the river flow from the northern part of the Earth is affected by fragmentation of the river channels by dams. In water management, there is always a tradeoff between upstream and downstream activities, not only regarding total water quantities but also for temporal patterns and water quality aspects. Sharing a water resource can generate conflicts but geopolitical

  19. Comparison of Liquid Limit of Highly Plastic Clay by Means of Casagrande and Fall Cone Apparatus

    DEFF Research Database (Denmark)

    Grønbech, Gitte Lyng; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

    2011-01-01

    plasticity of the Danish Eocene Clay two new classification categories are introduces to the Plasticity Chart in order to fully describe the clay; super high plasticity Clay (CS) and extremely high plasticity clay (CE), covering the range up to Liquid Limits up to 200% and 350% respectively. A correlation......The connection between the Liquid Limit found using the Casagrande and the Fall Cone Apparatus is tested for the Danish Eocene Clay that has Liquid Limits up to 350% and Plasticity Index up to 300%, which is well outside the normal range of Casagrande’s Plasticity Chart. Based on the high...... between the Liquid Limit from the Casagrande and the Fall Cone Apparatus is for super high plasticity clay. For extremely high plasticity clay it was found that the Fall Cone method underestimated the Liquid Limit with up to 43 percentage points, making the Fall Cone an unreliable method of finding...

  20. Carbon Nanotube Macroelectronics for Active Matrix Polymer-Dispersed Liquid Crystal Displays.

    Science.gov (United States)

    Cong, Sen; Cao, Yu; Fang, Xin; Wang, Yufeng; Liu, Qingzhou; Gui, Hui; Shen, Chenfei; Cao, Xuan; Kim, Eun Sok; Zhou, Chongwu

    2016-11-22

    Active matrix liquid crystal display (AMLCD) is the most widely used display technology nowadays. Transparent display is one of the emerging technologies to provide people with more features such as displaying images on transparent substrates and simultaneously enabling people to see the scenery behind the panel. Polymer-dispersed liquid crystal (PDLC) is a possible active matrix transparent display technology due to its high transparency, good visibility, and low power consumption. Carbon nanotubes (CNTs) with excellent mobility, high transparency, and room-temperature processing compatibility are ideal materials for the driver circuit of the PDLC display. Here, we report the monolithic integration of CNT thin-film transistor driver circuit with PDLC pixels. We studied the transmission properties of the PDLC pixels and characterized the performance of CNT thin-film transistors. Furthermore, we successfully demonstrated active matrix seven-segment PDLC displays using CNT driver transistors. Our achievements open up opportunities for future nanotube-based, flexible thin-film transparent display electronics.

  1. Low density solvent-based dispersive liquid-liquid microextraction for the determination of synthetic antioxidants in beverages by high-performance liquid chromatography.

    Science.gov (United States)

    Çabuk, Hasan; Köktürk, Mustafa

    2013-01-01

    A simple and efficient method was established for the determination of synthetic antioxidants in beverages by using dispersive liquid-liquid microextraction combined with high-performance liquid chromatography with ultraviolet detection. Butylated hydroxy toluene, butylated hydroxy anisole, and tert-butylhydroquinone were the antioxidants evaluated. Experimental parameters including extraction solvent, dispersive solvent, pH of sample solution, salt concentration, and extraction time were optimized. Under optimal conditions, the extraction recoveries ranged from 53 to 96%. Good linearity was observed by the square of correlation coefficients ranging from 0.9975 to 0.9997. The relative standard deviations ranged from 1.0 to 5.2% for all of the analytes. Limits of detection ranged from 0.85 to 2.73 ng mL(-1). The method was successfully applied for determination of synthetic antioxidants in undiluted beverage samples with satisfactory recoveries.

  2. Liquids and liquid mixtures

    CERN Document Server

    Rowlinson, J S; Baldwin, J E; Buckingham, A D; Danishefsky, S

    2013-01-01

    Liquids and Liquid Mixtures, Third Edition explores the equilibrium properties of liquids and liquid mixtures and relates them to the properties of the constituent molecules using the methods of statistical thermodynamics. Topics covered include the critical state, fluid mixtures at high pressures, and the statistical thermodynamics of fluids and mixtures. This book consists of eight chapters and begins with an overview of the liquid state and the thermodynamic properties of liquids and liquid mixtures, including vapor pressure and heat capacities. The discussion then turns to the thermodynami

  3. Ionic liquid for high temperature headspace liquid-phase microextraction of chlorinated anilines in environmental water samples.

    Science.gov (United States)

    Peng, Jin-feng; Liu, Jing-fu; Jiang, Gui-bin; Tai, Chao; Huang, Min-jia

    2005-04-22

    Based on the non-volatility of room temperature ionic liquids (IL), 1-butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]) IL was employed as an advantageous extraction solvent for high temperature headspace liquid-phase microextraction (LPME) of chloroanilines in environmental water samples. At high temperature of 90 degrees C, 4-chloroaniline, 2-chloroaniline, 3,4-dichloroaniline, and 2,4-dichloroaniline were extracted into a 10 microl drop of [C4MIM][PF6] suspended on the needle of a high-performance liquid chromatography (HPLC) microsyringe held at the headspace of the samples. Then, the IL was injected directly into the HPLC system for determination. Parameters related to LPME were optimized, and high selectivity and low detection limits of the four chlorinated anilines were obtained because the extraction was performed at high temperature in headspace mode and the very high affinity between IL and chlorinated anilines. The proposed procedure was applied for the analysis of the real samples including tap water, river water and wastewater samples from a petrochemical plant and a printworks, and only 3,4-dichloroaniline was detected in the printworks wastewater at 88.2 microg l(-1) level. The recoveries for the four chlorinated anilines in the four samples were all in the range of 81.9-99.6% at 25 microg l(-1) spiked level.

  4. New spray congealing atomizer for the microencapsulation of highly concentrated solid and liquid substances.

    Science.gov (United States)

    Albertini, Beatrice; Passerini, Nadia; Pattarino, Franco; Rodriguez, Lorenzo

    2008-05-01

    A new pneumatic atomizer for spray congealing, called wide pneumatic nozzle (WPN), was developed. To evaluate its performance, microparticles containing highly concentrated either solid drug (Propafenone hydrochloride, PRF) or liquid nutraceutical (Vitamin E, VE) have been prepared and characterized. The results showed that the spray congealing nozzle enabled the production of spherical and not aggregated microparticles with high yields (95% w/w) and relatively narrow size distributions; moreover, increasing the viscosity of the suspension from 50 to 500 mPa s, the particle size increased. The loading of the drug was high for microspheres (50% for PRF and 30% for VE) and the encapsulation efficiency was good for all formulations. The drug release was easily modified according to the nature of the used excipients, as both lipophilic (carnauba wax, cetearyl and stearyl alcohols) and hydrophilic (PEG 4000) carriers were employed. Moreover the results evidenced that it was possible to encapsulate actives (VE) that are in a liquid form and to enhance their availability. In conclusion the developed spray congealing nozzle was able to nebulize very viscous systems that are usually not processed by conventional apparatus and to produce microspheres with high and uniform drug content.

  5. High performance batteries with carbon nanomaterials and ionic liquids

    Science.gov (United States)

    Lu, Wen [Littleton, CO

    2012-08-07

    The present invention is directed to lithium-ion batteries in general and more particularly to lithium-ion batteries based on aligned graphene ribbon anodes, V.sub.2O.sub.5 graphene ribbon composite cathodes, and ionic liquid electrolytes. The lithium-ion batteries have excellent performance metrics of cell voltages, energy densities, and power densities.

  6. High performance ultracapacitors with carbon nanomaterials and ionic liquids

    Science.gov (United States)

    Lu, Wen; Henry, Kent Douglas

    2012-10-09

    The present invention is directed to the use of carbon nanotubes and/or electrolyte structures in various electrochemical devices, such as ultracapacitors having an ionic liquid electrolyte. The carbon nanotubes are preferably aligned carbon nanotubes. Compared to randomly entangled carbon nanotubes, aligned carbon nanotubes can have better defined pore structures and higher specific surface areas.

  7. High Reynolds number liquid layer flow with flexible walls

    Indian Academy of Sciences (India)

    Permanent link: http://www.ias.ac.in/article/fulltext/sadh/040/03/0961-0972. Keywords. Stability; triple-deck; separation; boundary-layer; compliant wall. Abstract. The stability of liquid layer flow over an inclined flexible wall is studied using asymptotic methods based on the assumption that the Reynolds number is large.

  8. New Highly-Sensitive Ultra-Performance Liquid Chromatography ...

    African Journals Online (AJOL)

    Purpose: To develop and validate a simple, rapid, sensitive and specific ultraperformance liquid chromatography mass spectrometry method for the quantification of the angiotensin II receptor antagonist, telmisartan (TEL), in human plasma. Methods: After simple protein precipitation using acetonitrile and methanol, TEL and ...

  9. Highly efficient Brønsted acidic ionic liquid-based catalysts for biodiesel synthesis from vegetable oils.

    Science.gov (United States)

    Ghiaci, M; Aghabarari, B; Habibollahi, S; Gil, A

    2011-01-01

    Biodiesel has been produced by transesterification of canola oil with methanol in the presence of highly Brønsted acidic ionic liquids based on 1-benzyl-1H-benzimidazole, and the effect of reaction temperature, type and amount of catalyst, molar ratio and reaction time investigated. The results show that the 4B ionic liquid has the highest catalytic activity and best recyclability under the optimised reaction conditions. Thus, this ionic liquid is able to catalyze the transesterification of canola oil to its methyl esters in 5 h with yields of more than 95%. Density functional calculations (B3LYP), using the 6-311G basis set, have been performed to have a better understanding on the reactivity of these catalysts. The catalytic activity of 4B for the transesterification of other vegetable oils and alcohols has also been studied. Copyright © 2010 Elsevier Ltd. All rights reserved.

  10. Long alkyl chain bis-quaternary ammonium-based ionic liquids as biologically active xanthene dyes

    Energy Technology Data Exchange (ETDEWEB)

    Pernak, Juliusz; Swierczynska, Anna; Walkiewicz, Filip [Poznan Univ. of Technology, Poznan (Poland). Faculty of Chemical Technology; Krystkowiak, Ewa [A. Mickiewicz University, Poznan, (Poland). Faculty of Chemistry; Maciejewski, Andrzej [A. Mickiewicz University, Poznan (Poland). Centre of Ultrafast Laser Spectroscopy

    2009-07-01

    New examples of air- and moisture-stable, hydrophobic and hydrophilic bis-quaternary ammonium derived ionic liquids have been prepared. These ionic liquids have been proposed to act as biological active dyes with characteristic unique physicochemical properties, providing alternatives to some conventional anionic xanthene dyes such as eosine Y, fluorescein and erythrosine. (author)

  11. Active role of the liquid phase of developer in revealing surface flaws by capillary methods

    Energy Technology Data Exchange (ETDEWEB)

    Prokhorenko, P.P.; Dezhkunov, N.V.; Stoicheva, I.V.

    1988-08-01

    The article investigates the interaction of two chemically nonreacting liquids after they have been brought into contact with each other in a capillary. It is established that the liquid phase of the developer is not only a passive carrier of the developing component but also exerts an active influence on the process of development, and consequently, on the detectability of flaws.

  12. High Fidelity Simulation of Liquid Jet in Cross-flow Using High Performance Computing

    Science.gov (United States)

    Soteriou, Marios; Li, Xiaoyi

    2011-11-01

    High fidelity, first principles simulation of atomization of a liquid jet by a fast cross-flowing gas can help reveal the controlling physics of this complicated two-phase flow of engineering interest. The turn-around execution time of such a simulation is prohibitively long using typically available computational resources today (i.e. parallel systems with ~O(100) CPUs). This is due to multiscale nature of the problem which requires the use of fine grids and time steps. In this work we present results from such a simulation performed on a state of the art massively parallel system available at Oakridge Leadership Computing Facility (OLCF). Scalability of the computational algorithm to ~2000 CPUs is demonstrated on grids of up to 200 million nodes. As a result, a simulation at intermediate Weber number becomes possible on this system. Results are in agreement with detailed experiment measurements of liquid column trajectory, breakup location, surface wavelength, onset of surface stripping as well as droplet size and velocity after primary breakup. Moreover, this uniform grid simulation is used as a base case for further code enhancement by evaluating the feasibility of employing Adaptive Mesh Refinement (AMR) near the liquid-gas interface as a means of mitigating computational cost.

  13. Salting-out assisted liquid/liquid extraction with acetonitrile: a new high throughput sample preparation technique for good laboratory practice bioanalysis using liquid chromatography-mass spectrometry.

    Science.gov (United States)

    Zhang, Jun; Wu, Huaiqin; Kim, Elaine; El-Shourbagy, Tawakol A

    2009-04-01

    Acetonitrile, an organic solvent miscible with aqueous phase, has seen thousands of publications in the literature as an efficient deproteinization reagent. The use of acetonitrile for liquid-liquid extraction (LLE), however, has seen very limited application due to its miscibility with aqueous phase. The interest in LLE with acetonitrile has been pursued and reported in the literature by significantly lowering the temperature of the mixture or increasing the salt concentration in the mixture of acetonitrile and aqueous phase, resulting in the separation of the acetonitrile phase from aqueous phase, as observed in conventional LLE. However, very limited application of these methods has been reported. The throughput was limited. In this report, we report a new sample preparation technique, salting-out assisted liquid-liquid extraction with acetonitrile, for high-throughput good laboratory practice sample analysis using LCMS, Two compounds from an approved drug, Kaletra, were used to demonstrate the extractability of drugs from human plasma matrix. Magnesium sulfate was used as the salting-out reagent. Extracts were diluted and then injected into a reversed phase LC-MS/MS system directly. One 96-well plate was extracted with this new approach to evaluate multiple parameters of a good laboratory practice analytical method. Results indicate that the method is rapid, reliable and suitable for regulated bioanalysis. With minimal modification, this approach has been used for high-throughput good laboratory practice analysis of a number of compounds under development at Abbott.

  14. Poly(ionic liquid)/Ionic Liquid Ion-Gels with High "Free" Ionic Liquid Content: Platform Membrane Materials for CO2/Light Gas Separations.

    Science.gov (United States)

    Cowan, Matthew G; Gin, Douglas L; Noble, Richard D

    2016-04-19

    -films (ca. 100-nm-thick active layer). Traditional polymeric membrane materials are limited by a trade-off between permeability and selectivity empirically described by the "Robeson upper bound"-placing the desired membrane properties beyond reach. Therefore, the investigation of advanced and composite materials that can overcome the limitations of traditional polymeric materials is the focus of significant academic and industrial research. In particular, there has been substantial work on ionic-liquid (IL)-based materials due to their gas transport properties. This review provides an overview of our collaborative work on developing poly(ionic liquid)/ionic liquid (PIL/IL) ion-gel membrane technology. We detail developmental work on the preparation of PIL/IL composites and describe how this chemical technology was adapted to allow the roll-to-roll processing and preparation of membranes with defect-free active layers ca. 100 nm thick, CO2 permeances of over 6000 GPU, and CO2/N2 selectivity of ≥20-properties with the potential to reduce the cost of CO2 removal from coal-fired power plant flue gas to ca. $15 per ton of CO2 captured. Additionally, we examine the materials developments that have produced advanced PIL/IL composite membranes. These advancements include cross-linked PIL/IL blends, step-growth PIL/IL networks with facilitated transport groups, and PIL/IL composites with microporous additives for CO2/CH4 separations.

  15. CFD-PBM Approach with Different Inlet Locations for the Gas-Liquid Flow in a Laboratory-Scale Bubble Column with Activated Sludge/Water

    Directory of Open Access Journals (Sweden)

    Le Wang

    2017-08-01

    Full Text Available A novel computational fluid dynamics-population balance model (CFD-PBM for the simulation of gas mixing in activated sludge (i.e., an opaque non-Newtonian liquid in a bubble column is developed and described to solve the problem of measuring the hydrodynamic behavior of opaque non-Newtonian liquid-gas two-phase flow. We study the effects of the inlet position and liquid-phase properties (water/activated sludge on various characteristics, such as liquid flow field, gas hold-up, liquid dynamic viscosity, and volume-averaged bubble diameter. As the inlet position changed, two symmetric vortices gradually became a single main vortex in the flow field in the bubble column. In the simulations, when water was in the liquid phase, the global gas hold-up was higher than when activated sludge was in the liquid phase in the bubble column, and a flow field that was dynamic with time was observed in the bubble column. Additionally, when activated sludge was used as the liquid phase, no periodic velocity changes were found. When the inlet position was varied, the non-Newtonian liquid phase had different peak values and distributions of (dynamic liquid viscosity in the bubble column, which were related to the gas hold-up. The high gas hold-up zone corresponded to the low dynamic viscosity zone. Finally, when activated sludge was in the liquid phase, the volume-averaged bubble diameter was much larger than when water was in the liquid phase.

  16. Highly pressurized partially miscible liquid-liquid flow in a micro-T-junction. I. Experimental observations

    Science.gov (United States)

    Qin, Ning; Wen, John Z.; Ren, Carolyn L.

    2017-04-01

    This is the first part of a two-part study on a partially miscible liquid-liquid flow (liquid carbon dioxide and deionized water) which is highly pressurized and confined in a microfluidic T-junction. Our main focuses are to understand the flow regimes as a result of varying flow conditions and investigate the characteristics of drop flow distinct from coflow, with a capillary number, C ac , that is calculated based on the continuous liquid, ranging from 10-3 to 10-2 (10-4 for coflow). Here in part I, we present our experimental observation of drop formation cycle by tracking drop length, spacing, frequency, and after-generation speed using high-speed video and image analysis. The drop flow is chronologically composed of a stagnating and filling stage, an elongating and squeezing stage, and a truncating stage. The common "necking" time during the elongating and squeezing stage (with C ac˜10-3 ) for the truncation of the dispersed liquid stream is extended, and the truncation point is subsequently shifted downstream from the T-junction corner. This temporal postponement effect modifies the scaling function reported in the literature for droplet formation with two immiscible fluids. Our experimental measurements also demonstrate the drop speed immediately following their generations can be approximated by the mean velocity from averaging the total flow rate over the channel cross section. Further justifications of the quantitative analysis by considering the mass transfer at the interface of the two partially miscible fluids are provided in part II.

  17. Fabrication of thin TEM sample of ionic liquid for high-resolution ELNES measurements

    Energy Technology Data Exchange (ETDEWEB)

    Miyata, Tomohiro, E-mail: tomo-m@iis.u-tokyo.ac.jp; Mizoguchi, Teruyasu, E-mail: teru@iis.u-tokyo.ac.jp

    2017-07-15

    Investigation of the local structure, ionic and molecular behavior, and chemical reactions at high spatial resolutions in liquids has become increasingly important. Improvements in these areas help to develop efficient batteries and improve organic syntheses. Transmission electron microscopy (TEM) and scanning-TEM (STEM) have excellent spatial resolution, and the electron energy-loss near edge structure (ELNES) measured by the accompanied electron energy-loss spectroscopy (EELS) is effective to analyze the liquid local structure owing to reflecting the electronic density of states. In this study, we fabricate a liquid-layer-only sample with thickness of single to tens nanometers using an ionic liquid. Because the liquid film has a thickness much less than the inelastic mean free path (IMFP) of the electron beam, the fine structure of the C-K edge electron energy loss near edge structure (ELNES) can be measured with sufficient resolution to allow meaningful analysis. The ELNES spectrum from the thin liquid film has been interpreted using first principles ELNES calculations. - Highlights: • A fabrication method of thin liquid film samples for STEM-EELS observations is proposed. • The thickness of the fabricated thin liquid film is about 10 nm. • An ELNES is measured from the thin liquid with a high energy resolution. • The peaks of the ELNES are interpreted using first principles calculations.

  18. High performance liquid-level sensor based on mPOFBG for aircraft applications

    DEFF Research Database (Denmark)

    Marques, C. A. F.; Pospori, A.; Saez-Rodriguez, D.

    2015-01-01

    A high performance liquid-level sensor based on microstructured polymer optical fiber Bragg grating (mPOFBG) array sensors is reported in detail. The sensor sensitivity is found to be 98pm/cm of liquid, enhanced by more than a factor of 9 compared to a reported silica fiber-based sensor....

  19. Highly Selective Continuous Gas-Phase Methoxycarbonylation of Ethylene with Supported Ionic Liquid Phase (SILP) Catalysts

    DEFF Research Database (Denmark)

    Khokarale, Santosh Govind; Garcia Suárez, Eduardo José; Fehrmann, Rasmus

    2017-01-01

    Supported ionic liquid phase (SILP) technology was applied for the first time to the Pd-catalyzed continuous, gas-phase methoxycarbonylation of ethylene to selectively produce methyl propanoate (MP) in high yields. The influence of catalyst and reaction parameters such as, for example, ionic liquid...

  20. Liquid Phase Sintering of Highly Alloyed Stainless Steel

    DEFF Research Database (Denmark)

    Mathiesen, Troels

    1996-01-01

    of boride to AISI 316L type steels have previously been studied, but were found to be sensitive to intergranular corrosion due to formation of intermetallic phases rich in chromium and molybdenum. In order to improve this system further, new investigations have focused on the use of higher alloyed stainless......Liquid phase sintering of stainless steel is usually applied to improve corrosion resistance by obtaining a material without an open pore system. The dense structure normally also give a higher strength when compared to conventional sintered steel. Liquid phase sintrering based on addition...... steel as base material. The stainless base powders were added different amounts and types of boride and sintered in hydrogen at different temperatures and times in a laboratory furnace. During sintering the outlet gas was analyzed and subsequently related to the obtained microstructure. Thermodynamic...

  1. High Performance Mars Liquid Cooling and Ventilation Garment Project

    Science.gov (United States)

    Terrier, Douglas; Clayton, Ronald; Whitlock, David; Conger, Bruce

    2015-01-01

    EVA space suit mobility in micro-gravity is enough of a challenge and in the gravity of Mars, improvements in mobility will enable the suited crew member to efficiently complete EVA objectives. The idea proposed is to improve thermal efficiencies of the liquid cooling and ventilation garment (LCVG) in the torso area in order to free up the arms and legs by removing the liquid tubes currently used in the ISS EVA suit in the limbs. By using shaped water tubes that greatly increase the contact area with the skin in the torso region of the body, the heat transfer efficiency can be increased to provide the entire liquid cooling requirement and increase mobility by freeing up the arms and legs. Additional potential benefits of this approach include reduced LCVG mass, enhanced evaporation cooling, increased comfort during Mars EVA tasks, and easing of the overly dry condition in the helmet associated with the Advanced Extravehicular Mobility Unit (EMU) ventilation loop currently under development.

  2. High pressure electrical conductivity in naturally occurring silicate liquids

    Science.gov (United States)

    Tyburczy, James A.; Waff, Harve S.

    Electrical conductivities of molten Hawaiian rhyodacite and Yellowstone rhyolite obsidian were measured between 1200° C and 1400° C and at pressures up to 25 kilobars. The two melts exhibit similar trends. Arrhenius behavior is observed at all pressures studied. Isobaric activation enthalpies increase from about 0.5 eV at atmospheric pressure to about 0.9 eV at 25 kbars, and the magnitude of the conductivity decreases by about a factor of 4 between 0 and 25 kbar. At pressures between about 10 and 15 kbar an abrupt decrease in the slopes of isothermal log a versus pressure plots is observed. In each pressure range an equation of the form σ = σ'0 exp [- (E'σ + PΔV'σ)/kT], where σ'0, E'σ, and ΔV'σ, are constants, describes the polybaric, polythermal data. Comparison of these data with high pressure electrical conductivities of molten basalt and andesite reveals that relatively silica-rich melts, from andesitic to rhyolitic in composition, display similar trends, while the basaltic melt has analogous, but quantitatively different trends. Comparison of zero-pressure electrical conductivity and sodium diffusivity by means of the Nernst-Einstein relation indicates that sodium ion transport is the dominant mechanism of charge transport in the obsidian melt at zero pressure. The tholeiitic melt, on the other hand, displays only order of magnitude agreement between the electrical conductivity and sodium diffusivity, indicating that either ions other than sodium play a significant role in electrical transport or that the motions of the sodium ions are strongly correlated, or both. Comparison of the isobaric and isochoric activation enthalpies indicates that electrical conduction is energy restrained, as opposed to volume restrained. Conductivities in the andesitic, rhyodacitic, and rhyolitic melts conform to a single compensation law line, with no indication of the change in activation volume. The tholeiitic melt has a slightly different compensation line. In light

  3. Viscosity of Liquid Fe-17wt% Si at High Pressure and Temperature

    Science.gov (United States)

    Yu, X.; Secco, R. A.; Wang, Y.; Ohtani, E.; Terasaki, H.; Suzuki, A.

    2008-12-01

    In situ X-ray radiography falling-sphere experiments on liquid Fe-17wt% Si viscosity were carried out from 2 GPa to 7 GPa at APS and Spring-8 in multi-anvil apparati. Video images were recorded at speeds of up to 62 frames/sec. Both Re spheres coated with alumina and composite spheres of Pt or Re core and a mechanically prepared ruby mantle were used in the high pressure melts to avoid chemical reaction between the sample and the probing metallic spheres. The viscosity at the melting temperature was calculated from activation energy, which was determined from a combination of theoretical and experimental values of viscosity at ambient pressure. At the early stages of the compression (up to ~ 5.4 GPa), the viscosity increases but later appears to approach a constant value of 69 mPa.s in the higher pressure range. The constant relating activation energy to melting temperature, g, is 6.8 from this study. Assuming that temperature varies adiabatically in the core and melting temperature Tm at the inner core boundary is 4766 K and dTm dP = 10 K/GPa, the viscosity at the core-mantle boundary, inferred from this study, decreases to a value very close to the ambient pressure viscosity of 6 mPa.s for liquid metal.

  4. High-performance liquid chromatographic screening of chlorophyll derivatives produced during fruit storage.

    Science.gov (United States)

    Almela, L; Fernández-López, J A; Roca, M J

    2000-02-18

    Reversed-phase high-performance liquid chromatography with photodiode array and fluorescence detection was applied to the systematic screening of chlorophylls and derivative pigments. The chromatographic procedure proposed made it possible to successfully separate and identify eight chlorophyll derivatives (the a and b forms of chlorophyll, chlorophyllide, pheophytin and pheophorbide) by using a linear gradient of methanol, acetone and ammonium acetate. The method has been routinely applied to study chlorophyll degradation during the postharvest storage of cherimoya (Annona cherimola, Mill.) fruits. The brilliant green colour even at maturity, and its high chlorophyllase and Mg-dechelating activities, indicate that this plant material might be suitable for investigating the as yet not well known chlorophyll breakdown processes.

  5. Advanced active health monitoring system of liquid rocket engines

    Science.gov (United States)

    Qing, Xinlin P.; Wu, Zhanjun; Beard, Shawn; Chang, Fu-Kuo

    2008-11-01

    An advanced SMART TAPE system has been developed for real-time in-situ monitoring and long term tracking of structural integrity of pressure vessels in liquid rocket engines. The practical implementation of the structural health monitoring (SHM) system including distributed sensor network, portable diagnostic hardware and dedicated data analysis software is addressed based on the harsh operating environment. Extensive tests were conducted on a simulated large booster LOX-H2 engine propellant duct to evaluate the survivability and functionality of the system under the operating conditions of typical liquid rocket engines such as cryogenic temperature, vibration loads. The test results demonstrated that the developed SHM system could survive the combined cryogenic temperature and vibration environments and effectively detect cracks as small as 2 mm.

  6. Liquid Propulsion at IAE: Vision of the activities and future perspectives

    Directory of Open Access Journals (Sweden)

    Marco F. Carvalho Torres

    2009-01-01

    Full Text Available This paper presents the activities in the area of liquid propulsion, which received an effective boost at the end of the 90s. There is a consensus among specialists on the use of liquid propulsion in the next generation of satellite launcher vehicles in order to increase significantly both the performance and the satellites insertion accuracy. Several activities in this area are in development, among which should mention, the L5, the L15 and the L75 LPRE, the specifications for engine testing facilities for components and rocket stages, and a human resources program for training in the areas of liquid rocket engine design, manufacture and testing.

  7. An on-line high-performance liquid chromatography-diode-array detector-multi-stage mass spectrometry-deoxyribonucleic acid-4',6-diamidino-2-phenylindole-fluorescence detector system for screening the DNA-binding active compounds in Fufang Banbianlian Injection.

    Science.gov (United States)

    Li, Sensen; Jiang, Haixiu; Lin, Zongtao; Deng, Shanshan; Guan, Yanqing; Wang, Hong; Chen, Shizhong

    2015-12-11

    Fufang Banbianlian Injection (FBI), a well-known traditional Chinese medicine formula, has been recently approved and extensively used as a newly anti-inflammatory and anti-tumor drug. This prescription comprises an equal ratio of three traditional Chinese herbs, Lobelia chinensis Lour, Scutellaria barbata D. Don and Hedyotis diffusa Willd. The relationships between its chemical compositions and activities have not been understood well yet. To investigate the ingredients and their DNA-binding activities in FBI, an on-line high-performance liquid chromatography-diode-array detector-multi-stage mass spectrometry-deoxyribonucleic acid-4',6-diamidino-2-phenylindole-fluorescence detector (HPLC-DAD-MS(n)-DNA-DAPI-FLD) system was developed using a combination of chromatographic, mass spectrometric and fluorescent detection techniques. 4',6-Diamidino-2-phenylindole (DAPI) specifically binds to three ATT base pairs on the DNA minor groove, and thus can be used as a fluorescent probe for screening active compounds that compete ATT sequences with DAPI. Using this system, 21 of 58 identified or tentatively characterized compounds in FBI showed DNA-binding activities, with most of the active compounds being flavone glycosides. In addition, the structure-activity relationships of these active compounds suggested that conjugated planar structures are favorable for DNA-binding activities, and adjacent hydroxyl groups in flavonoids can significantly improve their activities. This is, to the best of our knowledge, the first application of DAPI as a fluorescent probe for the screening of DNA-binding active compounds in complex samples. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. High energy-density liquid rocket fuel performance

    Science.gov (United States)

    Rapp, Douglas C.

    1990-01-01

    A fuel performance database of liquid hydrocarbons and aluminum-hydrocarbon fuels was compiled using engine parametrics from the Space Transportation Engine Program as a baseline. Propellant performance parameters are introduced. General hydrocarbon fuel performance trends are discussed with respect to hydrogen-to-carbon ratio and heat of formation. Aluminum-hydrocarbon fuel performance is discussed with respect to aluminum metal loading. Hydrocarbon and aluminum-hydrocarbon fuel performance is presented with respect to fuel density, specific impulse and propellant density specific impulse.

  9. Effect of oxidation on base liquids of oil and synthetic-based drilling fluids at high pressure and high temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Shahbazi, K.; Mehta, S.A.; Moore, R.G.; Ursenbach, M.G. [Calgary Univ., AB (Canada)

    2005-07-01

    Diesels and distillates are used as a base liquid for most oil-based drilling fluids in conventional drilling and as the liquid phase in gasified liquids in some underbalanced drilling operations. They are also used as friction reducing agents to free stuck pipes. It is important to understand the true downhole rheological properties because they affect equivalent circulating density, hole cleaning, barite sag, surge/swab pressures during tripping, pump pressure and bit hydraulics. Also, gelation and high viscosity are major concerns, particularly at high temperatures. An experimental study was conducted to evaluate the effect of oxidation on some base liquids for oil-based and synthetic-based drilling fluids at high pressures and high temperatures. Gas and liquid phases were characterized and the solid phase was measured along with viscosity measurements at temperatures and pressures ranging from 20 to 152 degrees C at atmospheric pressures to 103.4 MPa. The viscosity of the liquid samples after aging was compared with that of corresponding fresh samples. The results indicate that the degree of oxidation plays an important role in increasing the sample viscosity. The increase in viscosity depends on temperature, and is more significant at low temperatures. Agitation of samples during aging with air resulted in increased amounts of solid precipitation while lowering the viscosity of the liquid phase. This study demonstrated that oxidation has an important influence on rheological properties of the oil, because it affects the mobility of the oil and therefore the recovery factor. 11 refs., 7 tabs., 22 figs.

  10. Modeling vapor liquid equilibrium of ionic liquids + gas binary systems at high pressure with cubic equations of state

    Directory of Open Access Journals (Sweden)

    A. C. D. Freitas

    2013-03-01

    Full Text Available Ionic liquids (IL have been described as novel environmentally benign solvents because of their remarkable characteristics. Numerous applications of these solvents continue to grow at an exponential rate. In this work, high pressure vapor liquid equilibria for 17 different IL + gas binary systems were modeled at different temperatures with Peng-Robinson (PR and Soave-Redlich-Kwong (SRK equations of state, combined with the van der Waals mixing rule with two binary interaction parameters (vdW-2. The experimental data were taken from the literature. The optimum binary interaction parameters were estimated by minimization of an objective function based on the average absolute relative deviation of liquid and vapor phases, using the modified Simplex algorithm. The solubilities of all gases studied in this work decrease as the temperature increases and increase with increasing pressure. The correlated results were highly satisfactory, with average absolute relative deviations of 2.10% and 2.25% for PR-vdW-2 and SRK-vdW-2, respectively.

  11. MEASUREMENT AND CORRELATION OF THE MASS TRANSFER COEFFICIENT FOR A LIQUID-LIQUID SYSTEM WITH HIGH DENSITY DIFFERENCE

    Directory of Open Access Journals (Sweden)

    Zhixian Huang

    Full Text Available Abstract To investigate the mass transfer behavior of a liquid-liquid system with high density difference (∆ρ≈500 kg/m3, single drop experiments were performed by using the ternary chloroform-ethanol-water system. The mass transfer direction was from the dispersed phase to the continuous phase, while the aqueous phase was dispersed in chloroform to generate drops. The influences of drop diameter, initial solute concentration and temperature on the mass transfer were investigated. The effects of the drop diameter and initial solute concentration on interfacial instability of droplets hanging in the continuous phase were also observed. For the purpose of correlation, a mass transfer enhancement factor F was introduced and then correlated as a function of dimensionless variables. The modified correlation from the mass transfer coefficient model was found to fit well with the experimental values.

  12. High-performance liquid chromatography analysis methods developed for quantifying enzymatic esterification of flavonoids in ionic liquids

    DEFF Research Database (Denmark)

    Lue, Bena-Marie; Guo, Zheng; Xu, X.B.

    2008-01-01

    Methods using reversed-phase high-performance liquid chromatography (RP-HPLC) with ELSD were investigated to quantify enzymatic reactions of flavonoids with fatty acids in the presence of diverse room temperature ionic liquids (RTILs). A buffered salt (preferably triethylamine-acetate) was found...... essential for separation of flavonoids from strongly polar RTILs, whereby RTILs were generally visible as two major peaks identified based on an ion-pairing/exchanging hypothesis. C8 and C12 stationary phases were optimal while mobile phase pH (3-7) had only a minor influence on separation. The method...... developed was successfully applied for primary screening of RTILs (> 20), with in depth evaluation of substrates in 10 RTILs, for their evaluation as reaction media....

  13. Scale-up and evaluation of high solid ionic liquid pretreatment and enzymatic hydrolysis of switchgrass

    National Research Council Canada - National Science Library

    Li, Chenlin; Tanjore, Deepti; He, Wei; Wong, Jessica; Gardner, James L; Sale, Kenneth L; Simmons, Blake A; Singh, Seema

    2013-01-01

    Ionic liquid (IL) pretreatment is receiving significant attention as a potential process that enables fractionation of lignocellulosic biomass and produces high yields of fermentable sugars suitable for the production of renewable fuels...

  14. CTE-Matched, Liquid-Cooled, High Thermal Conductivity Heat Sink Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose the development of a CTE-matched, liquid-cooled, high thermal conductivity heat sink for use in spacecraft thermal management applications. The material...

  15. HIGH PERFORMANCE LIQUID CHROMATOGRAPHIC SEPARATION OF THE ENANTIOMERS OF ORGANOPHOSPHORUS PESTICIDES ON POLYSACCHARIDE CHIRAL STATIONARY PHASES

    Science.gov (United States)

    High-performance liquid chromatographic separation of the individual enantiomers of 12 organophosphorus pesticides (OPs) was obtained on polysaccharide enantioselective HPLC columns using alkane-alcohol mobile phase. The OP pesticides were crotoxyphos, dialifor, fonofos, fenamiph...

  16. Atomic force microscopic study of the structure of high-density polyethylene deformed in liquid medium by crazing mechanism.

    Science.gov (United States)

    Bagrov, D V; Yarysheva, A Y; Rukhlya, E G; Yarysheva, L M; Volynskii, A L; Bakeev, N F

    2014-02-01

    A procedure has been developed for the direct atomic force microscopic (AFM) examination of the native structure of high-density polyethylene (HDPE) deformed in an adsorption-active liquid medium (AALM) by the crazing mechanism. The AFM investigation has been carried out in the presence of a liquid medium under conditions preventing deformed films from shrinkage. Deformation of HDPE in AALM has been shown to proceed through the delocalized crazing mechanism and result in the development of a fibrillar-porous structure. The structural parameters of the crazed polymer have been determined. The obtained AFM images demonstrate a nanosized nonuniformity of the deformation and enable one to observe the structural rearrangements that take place in the deformed polymer after removal of the liquid medium and stress relaxation. A structural similarity has been revealed between HDPE deformed in the AALM and hard elastic polymers. © 2013 The Authors Journal of Microscopy © 2013 Royal Microscopical Society.

  17. Connection for transfer of Liquid Nitrogen from High Voltage to ground potential

    DEFF Research Database (Denmark)

    Rasmussen, Claus Nygaard; Hansen, Finn; Willén, Dag

    2001-01-01

    In order to operate a superconducting cable conductor it must be kept at a cryogenic temperature (e.g. using liquid nitrogen). The superconducting cable conductor is at high voltage and the cooling equipment is kept at ground potential. This requires a thermally insulating connection that is also...... properties and withstand towards high-pressure liquid nitrogen. The length per joint is approximately 900 mm, including a Johnstoncoupling. The joints are tested in a closed liquid nitrogen circuit, with a pressure of up to 10 bars. The rated voltage of the cable system is 36 kV (phase-phase)....

  18. Vortex-assisted low density solvent based demulsified dispersive liquid-liquid microextraction and high-performance liquid chromatography for the determination of organophosphorus pesticides in water samples.

    Science.gov (United States)

    Seebunrueng, Ketsarin; Santaladchaiyakit, Yanawath; Srijaranai, Supalax

    2014-05-01

    A simple, rapid, effective and eco-friendly preconcentration method, vortex-assisted low density solvent based solvent demulsified dispersive liquid-liquid microextraction (VLDS-SD-DLLME), followed by high performance liquid chromatography-diode array detector (HPLC-DAD) analysis, has been developed for the first time for the determination of four organophosphorus pesticides (OPPs) (e.g., azinphos-methyl, parathion-methyl, fenitrothion and diazinon) in environmental water samples. In this preconcentration procedure, an emulsion was obtained after the mixture of extraction solvent (1-dodecanol) and dispersive solvent (acetonitrile, ACN) was injected rapidly into 10 mL of the sample solution. The vortex agitator aided the dispersion of the extraction solvent into the sample solution. After the formation of an emulsion, the demulsifier (ACN) was added, resulting in the rapid separation of the mixture into two phases without centrifugation. Under optimal conditions, the proposed method provided high extraction efficiency (90-99%), good linearity range (0.5-500 ng mL(-1)), low limits of detection (0.25-1 ng mL(-1)) and good repeatability and recoveries were obtained. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Experiments on FTU with an actively water cooled liquid lithium limiter

    Energy Technology Data Exchange (ETDEWEB)

    Mazzitelli, G., E-mail: giuseppe.mazzitelli@enea.it [Associazione EURATOM-ENEA sulla Fusione, C.R. Frascati, C.P. 65-00044 Frascati, Rome (Italy); Apicella, M.L.; Apruzzese, G.; Crescenzi, F.; Iannone, F.; Maddaluno, G. [Associazione EURATOM-ENEA sulla Fusione, C.R. Frascati, C.P. 65-00044 Frascati, Rome (Italy); Pericoli-Ridolfini, V. [Associazione EURATOM-ENEA sulla Fusione, CREATE, Università di Napoli Federico II, 80125 Napoli (Italy); Roccella, S.; Reale, M.; Viola, B. [Associazione EURATOM-ENEA sulla Fusione, C.R. Frascati, C.P. 65-00044 Frascati, Rome (Italy); Lyublinski, I.; Vertkov, A. [JSC “RED STAR”, Moscow (Russian Federation)

    2015-08-15

    In order to prevent the overheating of the liquid Li surface and the consequent Li evaporation for T > 500 °C, an advanced version of the liquid lithium limiter has been realized and installed on FTU. This new system, named Cooled Lithium Limiter (CLL), has been optimized to demonstrate the lithium limiter capability to sustain thermal loads as high as 10 MW/m{sup 2} with up to 5 s of plasma pulse duration. The CLL operates with an actively cooled system with water circulation at the temperature of about 200 °C, for heating lithium up to the melting point and for the heat removal during the plasma discharges. To characterize CLL during discharges, a fast infrared camera and the spectroscopic signals from Li and D atom emission have been used. The experiments analyzed so far and simulated by ANSYS code, point out that heat loads as high as 2 MW/m{sup 2} for 1.5 s have been withstood without problems.

  20. [The bioelectric activity of the brain in dyscirculatory encephalopathy and arterial hypertension developed in the Chernobyl nuclear disaster liquidators].

    Science.gov (United States)

    Podsonnaia, I V; Efremushkin, G G; Zhelobetskaia, E D

    2012-01-01

    The long-term effects of the ionizing radiation on the bioelectric brain activity in the Chernobyl nuclear disaster liquidators with discirculatory encephalopathy and arterial hypertension were studied. We examined 195 male patients, aged from 30 to 65 years, with the clinical presentations of discirculatory encephalopathy, using electroencephalography: 105 patients were liquidators of the Chernobyl nuclear disaster (the main group) and 90 patients had no radiation anamnesis (the comparison group). It has been found that the development of discirculatory encephalopathy in liquidators of the Chernobyl nuclear disaster is mainly associated with the dysfunction of diencephalic and cortical structures. The specificity of the neurofunctional brain abnormalities in liquidators with discirculatory encephalopathy is characterized by the predominance of the low-amplitude and low-frequency alpha-activity or by the lack of alpha-rhythm and by its substitution for the high-frequency beta-rhythm with the presence of theta- and delta-activity and by the more significant flatness of the alpha-rhythm zonation. The presence of the radiation factor in the past history is correlated with the failure of the bioelectric brain activity in the alpha band (r=0.42) that increases risk of abnormal changes by a factor of 10 (pChernobyl nuclear disaster in the post-radiation period during the development of discirculatory encephalopathy and arterial hypertension.

  1. Activation volume of selected liquid crystals in the density scaling regime.

    Science.gov (United States)

    Grzybowski, A; Urban, S; Mroz, S; Paluch, M

    2017-02-09

    In this paper, we demonstrate and thoroughly analyze the activation volumetric properties of selected liquid crystals in the nematic and crystalline E phases in comparison with those reported for glass-forming liquids. In the analysis, we have employed and evaluated two entropic models (based on either total or configurational entropies) to describe the longitudinal relaxation times of the liquid crystals in the density scaling regime. In this study, we have also exploited two equations of state: volumetric and activation volumetric ones. As a result, we have established that the activation volumetric properties of the selected liquid crystals are quite opposite to such typical properties of glass-forming materials, i.e., the activation volume decreases and the isothermal bulk modulus increases when a liquid crystal is isothermally compressed. Using the model based on the configurational entropy, we suggest that the increasing pressure dependences of the activation volume in isothermal conditions and the negative curvature of the pressure dependences of isothermal longitudinal relaxation times can be related to the formation of antiparallel doublets in the examined liquid crystals. A similar pressure effect on relaxation dynamics may be also observed for other material groups in case of systems, the molecules of which form some supramolecular structures.

  2. High-Activity Dealloyed Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kongkanand, Anusorn [General Motors LLC, Pontiac, MI (United States)

    2014-09-30

    Reduction of costly Pt usage in proton exchange membrane fuel cell electrodes is one of the major challenges towards development and commercialization of fuel cell vehicles. Although few have met the initial-kinetic activity requirements in a realistic fuel cell device, no catalyst material has ever met the demanding fuel cell durability targets set by DOE. In this project, a team of 4 universities and 2 companies came together to investigate a concept that appeared promising in preliminary non-fuel cell tests then to further develop the catalyst to a mature level ready for vehicle implementation. The team consists of academia with technical leadership in their respective areas, a catalyst supplier, and a fuel cell system integrator.The tightly collaborative project enabled development of a highly active and durable catalyst with performance that significantly exceeds that of previous catalysts and meets the DOE targets for the first time (Figure 1A). The catalyst was then further evaluated in full-active-area stack in a realistic vehicle operating condition (Figure 1B). This is the first public demonstration that one can realize the performance benefit and Pt cost reduction over a conventional pure Pt catalyst in a long-term realistic PEMFC system. Furthermore, systematic analyses of a range of catalysts with different performance after fuel cell testing allowed for correlation between catalyst microstructure and its electrocatalytic activity and durability. This will in turn aid future catalyst development.

  3. Experimental and Theoretical Investigations on Viscosity of Fe-Ni-C Liquids at High Pressures

    Science.gov (United States)

    Chen, B.; Lai, X.; Wang, J.; Zhu, F.; Liu, J.; Kono, Y.

    2016-12-01

    Understanding and modeling of Earth's core processes such as geodynamo and heat flow via convection in liquid outer cores hinges on the viscosity of candidate liquid iron alloys under core conditions. Viscosity estimates from various methods of the metallic liquid of the outer core, however, span up to 12 orders of magnitude. Due to experimental challenges, viscosity measurements of iron liquids alloyed with lighter elements are scarce and conducted at conditions far below those expected for the outer core. In this study, we adopt a synergistic approach by integrating experiments at experimentally-achievable conditions with computations up to core conditions. We performed viscosity measurements based on the modified Stokes' floating sphere viscometry method for the Fe-Ni-C liquids at high pressures in a Paris-Edinburgh press at Sector 16 of the Advanced Photon Source, Argonne National Laboratory. Our results show that the addition of 3-5 wt.% carbon to iron-nickel liquids has negligible effect on its viscosity at pressures lower than 5 GPa. The viscosity of the Fe-Ni-C liquids, however, becomes notably higher and increases by a factor of 3 at 5-8 GPa. Similarly, our first-principles molecular dynamics calculations up to Earth's core pressures show a viscosity change in Fe-Ni-C liquids at 5 GPa. The significant change in the viscosity is likely due to a liquid structural transition of the Fe-Ni-C liquids as revealed by our X-ray diffraction measurements and first-principles molecular dynamics calculations. The observed correlation between structure and physical properties of liquids permit stringent benchmark test of the computational liquid models and contribute to a more comprehensive understanding of liquid properties under high pressures. The interplay between experiments and first-principles based modeling is shown to be a practical and effective methodology for studying liquid properties under outer core conditions that are difficult to reach with the current

  4. Hybrid Young interferometer for high resolution measurement of dynamic speckle using high birefringence liquid crystal

    Science.gov (United States)

    Bennis, N.; Holdynski, Z.; Merta, I.; Marc, P.; Kula, P.; Mazur, R.; Piecek, W.; Jaroszewicz, L. R.

    2015-08-01

    It is well known that the Young interference experiment is the fundamental setup to combine two beams and to construct the phase modulated light. Moreover, homodyne phase demodulator is based on signal decoding in back Fourier focal plane using bicell photodetector (B-PD). On the above base, we propose a novel experimental approach to the signals demodulation by using the optical interferometer which operates in homodyne mode, combined with liquid crystal spatial light modulators operating both phase as speckle modulator. Dynamic phase changes between the two beams can be controlled by monopixel liquid crystals cell placed in one branch of the interferometer. A phase modulation effect in a signal arm of interferometer is observed as a dynamic shift of the speckle pattern. Simple arithmetic combination of signals from B-PD placed in speckle pattern plane is only one necessary numerical manipulation to obtain exactly phase difference. Concept of signals demodulation in the Fourier focal plane can be only used for exactly defined geometrical (B-PD as well as Young interferometer) and physical parameters (polarization, wavelength). We optimize the setup geometry to obtain extremely high measurement resolution. In this paper we focus on the principles of operation of each part of the system as well as discussion their requirement in order to increase the signal to noise ratio.

  5. Recent Experimental Efforts on High-Pressure Supercritical Injection for Liquid Rockets and Their Implications

    Directory of Open Access Journals (Sweden)

    Bruce Chehroudi

    2012-01-01

    Full Text Available Pressure and temperature of the liquid rocket thrust chambers into which propellants are injected have been in an ascending trajectory to gain higher specific impulse. It is quite possible then that the thermodynamic condition into which liquid propellants are injected reaches or surpasses the critical point of one or more of the injected fluids. For example, in cryogenic hydrogen/oxygen liquid rocket engines, such as Space Shuttle Main Engine (SSME or Vulcain (Ariane 5, the injected liquid oxygen finds itself in a supercritical condition. Very little detailed information was available on the behavior of liquid jets under such a harsh environment nearly two decades ago. The author had the opportunity to be intimately involved in the evolutionary understanding of injection processes at the Air Force Research Laboratory (AFRL, spanning sub- to supercritical conditions during this period. The information included here attempts to present a coherent summary of experimental achievements pertinent to liquid rockets, focusing only on the injection of nonreacting cryogenic liquids into a high-pressure environment surpassing the critical point of at least one of the propellants. Moreover, some implications of the results acquired under such an environment are offered in the context of the liquid rocket combustion instability problem.

  6. highly selective amino acid salt solutions as absorption liquid for CO(2) capture in gas-liquid membrane contactors.

    Science.gov (United States)

    Simons, Katja; Nijmeijer, Kitty; Mengers, Harro; Brilman, Wim; Wessling, Matthias

    2010-08-23

    The strong anthropogenic increase in the emission of CO(2) and the related environmental impact force the developments towards sustainability and carbon capture and storage (CCS). In the present work, we combine the high product yields and selectivities of CO(2) absorption processes with the advantages of membrane technology in a membrane contactor for the separation of CO(2) from CH(4) using amino acid salt solutions as competitive absorption liquid to alkanol amine solutions. Amino acids, such as sarcosine, have the same functionality as alkanol amines (e.g., monoethanolamine=MEA), but in contrast, they exhibit a better oxidative stability and resistance to degradation. In addition, they can be made nonvolatile by adding a salt functionality, which significantly reduces the liquid loss due to evaporation at elevated temperatures in the desorber. Membrane contactor experiments using CO(2)/CH(4) feed mixtures to evaluate the overall process performance, including a full absorption/desorption cycle show that even without a temperature difference between absorber and desorber, a CO(2)/CH(4) selectivity of over 70 can be easily achieved with the sarcosine salt solution as absorption liquid. This selectivity reaches values of 120 at a temperature difference between absorber and desorber of 35 degrees C, compared to a value of only 60 for MEA under the same conditions. Although CO(2) permeance values are somewhat lower than the values obtained for MEA, the results clearly show the potential of amino acid salt solutions as competitive absorption liquids for the energy efficient removal of CO(2). In addition, due to the low absorption of CH(4) in sarcosine compared to MEA, the loss of CH(4) is reduced and significantly higher CH(4) product yields can be obtained.

  7. [Estimation of chloramphenicol in the working area air by high performance liquid chromatography].

    Science.gov (United States)

    Kristova-Bagdasarian, V L; Chokhadzhieva, D

    2008-01-01

    Chloramphenicol (levomycetin) is a broad-spectrum antibiotic that is active against gram-positive and gram-negative microorganisms. At present, it is manufactured via organic synthesis. Working place air becomes polluted during the manufacture and use of medicines containing chloramphenicol. In the working place air, chloramphenicol is present as a disintegration aerosol and may provoke occupational diseases of varying severity in the exposed persons. A procedure has been determined to measure air chloramphenicol, by using high performance liquid chromatography. Aspiration through an AFA FPP-15 aerosol filter is a suitable device for air chloramphenicol sampling. The selected chloramphenicol is removed from the filter via triple methanol extraction in an ultrasound bath. The pooled extract is evaporated to dryness in a current of nitrogen and the dry residue is dissolved in the mobile phase containing acetonitrile : buffer (pH 4.8) = 30:70. The chloramphenicol determination procedure using reverse-phase liquid chromatography with ultraviolet detection at a wavelength of 275 nm has been developed and completely validated. Chromatographic conditions are given. The retention time of chloramphenicol is 6.5 min. The detection limit is 0.1 microg/cm3. The method is noted for a linear relationship between the concentration of chloramphenicol (microg/cm3) and the peak area (mm2) in the range of 1 to 20 microg/cm3.

  8. Intravascular Residence Time Determination for the Cyanide Antidote Dimethyl Trisulfide in Rat by Using Liquid-Liquid Extraction Coupled with High Performance Liquid Chromatography

    Directory of Open Access Journals (Sweden)

    Deepthika De Silva

    2016-01-01

    Full Text Available These studies represent the first report on the intravascular residence time determinations for the cyanide antidote dimethyl trisulfide (DMTS in a rat model by using high performance liquid chromatography coupled with ultraviolet absorption spectroscopy (HPLC-UV. The newly developed sample preparation included liquid-liquid extraction by cyclohexanone. The calibration curves showed a linear response for DMTS concentrations between 0.010 and 0.30 mg/mL with R2 = 0.9994. The limit of detection for DMTS via this extraction method was 0.010 mg/mL, and the limit of quantitation was 0.034 mg/mL. Thus this calibration curve provided a tool for determining DMTS in the range between 0.04 and 0.30 mg/mL. Rats were given 20 mg/kg DMTS dose (in 15% Polysorbate 80 intravenously, and blood samples were taken 15, 60, 90, 120, and 240 min after DMTS injections. The data points were plotted as DMTS concentration in RBCs versus time, and the intravascular residence time was determined graphically. The results indicated a half-life of 36 min in a rat model, suggesting that the circulation time is long enough to provide a reasonable time interval for cyanide antagonism.

  9. Low-density solvent-based dispersive liquid-liquid microextraction followed by high performance liquid chromatography for determination of warfarin in human plasma.

    Science.gov (United States)

    Ghambari, Hoda; Hadjmohammadi, Mohammadreza

    2012-06-15

    Extraction and determination of warfarin, a widely used anticoagulant drug, in human plasma were performed using a new generation of dispersive liquid-liquid microextraction (DLLME) and high performance liquid chromatography (HPLC). The extraction procedure is based on extraction solvents lighter than water and performing of extraction in a specially designed extraction cell. Some important parameters, including kind and volume of extraction and disperser solvents, pH of the sample solution, salt concentration in the sample solution and extraction time were investigated and optimized. Under the optimized conditions (150 μL 1-octanol as extraction solvent, 150 μL methanol as disperser solvent, pH(sample)=2.3, extraction time of 2 min, without salt addition), limit of detection (LOD) of 5 ng mL⁻¹ and extraction recovery of 91.0% were obtained. The calibration curve was linear within the range of 15-3000 ng mL⁻¹ with the square of correlation coefficient (R²) of 0.998. Repeatability and reproducibility of method based on five replicate extraction and determination were 2.8% and 6.5%, respectively. The proposed method was applied successfully for the determination of warfarin in plasma sample from a patient under treatment with this drug, and was demonstrated to be sensitive, efficient, and convenient. Copyright © 2012 Elsevier B.V. All rights reserved.

  10. Automated dispersive liquid-liquid microextraction coupled to high performance liquid chromatography - cold vapour atomic fluorescence spectroscopy for the determination of mercury species in natural water samples.

    Science.gov (United States)

    Liu, Yao-Min; Zhang, Feng-Ping; Jiao, Bao-Yu; Rao, Jin-Yu; Leng, Geng

    2017-04-14

    An automated, home-constructed, and low cost dispersive liquid-liquid microextraction (DLLME) device that directly coupled to a high performance liquid chromatography (HPLC) - cold vapour atomic fluorescence spectroscopy (CVAFS) system was designed and developed for the determination of trace concentrations of methylmercury (MeHg(+)), ethylmercury (EtHg(+)) and inorganic mercury (Hg(2+)) in natural waters. With a simple, miniaturized and efficient automated DLLME system, nanogram amounts of these mercury species were extracted from natural water samples and injected into a hyphenated HPLC-CVAFS for quantification. The complete analytical procedure, including chelation, extraction, phase separation, collection and injection of the extracts, as well as HPLC-CVAFS quantification, was automated. Key parameters, such as the type and volume of the chelation, extraction and dispersive solvent, aspiration speed, sample pH, salt effect and matrix effect, were thoroughly investigated. Under the optimum conditions, linear range was 10-1200ngL(-1) for EtHg(+) and 5-450ngL(-1) for MeHg(+) and Hg(2+). Limits of detection were 3.0ngL(-1) for EtHg(+) and 1.5ngL(-1) for MeHg(+) and Hg(2+). Reproducibility and recoveries were assessed by spiking three natural water samples with different Hg concentrations, giving recoveries from 88.4-96.1%, and relative standard deviations <5.1%. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Vortex-assisted liquid-liquid micro-extraction and high-performance liquid chromatography for a higher sensitivity methyl methacrylate determination in biological matrices.

    Science.gov (United States)

    Sousa, Tiago F A; Aniceto, Marta C; Amorim, Célia G; Souto-Lopes, Mariana; Pérez-Mongiovi, Daniel; Montenegro, Maria C B S M; Araújo, Alberto N

    2014-05-01

    A vortex-assisted liquid-liquid micro-extraction coupled with high-performance liquid chromatography, with UV-vis, is proposed to pre-concentrate methyl methacrylate and to improve separation in biological matrices. The use of 1-octanol as extracting phase, its volume, the need for a dispersant agent, the agitation conditions and the cooling time before phase separation were evaluated. In optimum conditions, enrichment factors of 20 (±0.5) and enrichment recovery of 99% were obtained. The straightforward association of this extraction process with the HPLC method, previously regulated by the International Organization for Standardization, afforded a detection limit of 122 ng/mL and a quantification limit of 370 ng/mL. The within-batch precision, relative standard deviation, was 3% for a sample with 1.49 µg/mL and 4% for a sample with 13.4 µg/mL. The results showed a between batch-precision of 21% for experiments performed on five different days, for a sample with a concentration of 1.10 µg/mL in methyl methacrylate. Copyright © 2013 John Wiley & Sons, Ltd.

  12. Determination of Fusarium toxins in functional vegetable milks applying salting-out-assisted liquid-liquid extraction combined with ultra-high-performance liquid chromatography tandem mass spectrometry.

    Science.gov (United States)

    Hamed, Ahmed M; Arroyo-Manzanares, Natalia; García-Campaña, Ana M; Gámiz-Gracia, Laura

    2017-11-01

    Vegetable milks are considered as functional foods due to their physiological benefits. Although the consumption of these products has significantly increased, they have received little attention in legislation with regard to contaminants. However, they may contain mycotoxins resulting from the use of contaminated raw materials. In this work, ultra-high-performance liquid chromatography tandem mass spectrometry has been proposed for the determination of the most relevant Fusarium toxins (fumonisin B1 and B2, HT-2 and T-2 toxins, zearalenone, deoxynivalenol and fusarenon-X) in different functional beverages based on cereals, legumes and seeds. Sample treatment consisted of a simple salting-out-assisted liquid-liquid extraction with no further clean-up. The method provided limits of quantification between 3.2 and 57.7 µg L-1, recoveries above 80% and precision with RSD lower than 12%. The method was also applied for studying the occurrence of these mycotoxins in market samples of vegetable functional beverages and deoxynivalenol was found in three oat-based commercial drinks.

  13. Synthesis of benzoazole ionic liquids and evaluation of their antimicrobial activity

    Directory of Open Access Journals (Sweden)

    Łukasz Czekański

    2014-07-01

    Full Text Available A new class of chemicals composed not of molecules but ions, an organic cation and an organic or inorganic anion, has recently attracted attention. When these new kind of salts are in the liquid state below 100 oC, they are named ionic liquids (ILs. In this work, the synthesis of ionic liquids obtained from a 2-mercaptobenzimidazole, 2-mercaptobenzoxazole or 2-mercaptobenzothiazole anion and 1-alkyl-3-methylimidazolium or choline cation are described. The antimicrobial activity against several Gram-positive and Gram-negative bacteria and a yeast was also evaluated.

  14. Advanced Supported Liquid Membranes for CO2 Control in Extravehicular Activity Applications

    Science.gov (United States)

    Wickham, David T.; Gleason, Kevin J.; Engel, Jeffrey R.; Cowley, Scott W.; Chullen, Cinda

    2014-01-01

    Developing a new, robust, portable life support system (PLSS) is currently a high priority for NASA in order to support longer and safer extravehicular activity (EVA) missions. One of the critical PLSS functions is maintaining the carbon dioxide (CO2) concentration in the suit at acceptable levels. Although the Metal Oxide (MetOx) canister has worked well, it has a finite CO2 adsorption capacity. Consequently, the unit would have to be larger and heavier to extend EVA times. Therefore, new CO2 control technologies must be developed to meet mission objectives without increasing the size of the PLSS. Although recent work has centered on sorbents that can be regenerated during the EVA, this strategy increases the system complexity and power consumption. A simpler approach is to use a membrane that selectively vents CO2 to space. A membrane has many advantages over current technology: it is a continuous system with no theoretical capacity limit, it requires no consumables, and it requires no hardware for switching beds between absorption and regeneration. Unfortunately, conventional gas separation membranes do not have adequate selectivity for use in the PLSS. However, the required performance could be obtained with a supported liquid membrane (SLM), which consists of a micro porous material filled with a liquid that selectively reacts with CO2 over oxygen (O2). In a current Phase II SBIR project, Reaction Systems has developed a new reactive liquid, which has effectively zero vapor pressure making it an ideal candidate for use in an SLM. The SLM function has been demonstrated with representative pressures of CO2, O2, and water (H2O). In addition to being effective for CO2 control, the SLM also vents moisture to space. Therefore, this project has demonstrated the feasibility of using an SLM to control CO2 in an EVA application.

  15. Chromium liquid waste inertization in an inorganic alkali activated matrix: Leaching and NMR multinuclear approach

    Energy Technology Data Exchange (ETDEWEB)

    Ponzoni, Chiara, E-mail: chiara.ponzoni@unimore.it [University of Modena and Reggio Emilia, Department of Engineering “Enzo Ferrari”, Modena (Italy); Lancellotti, Isabella; Barbieri, Luisa [University of Modena and Reggio Emilia, Department of Engineering “Enzo Ferrari”, Modena (Italy); Spinella, Alberto; Saladino, Maria Luisa [University of Palermo CGA-UniNetLab, Palermo (Italy); Martino, Delia Chillura [University of Palermo, Department STEBICEF, Palermo (Italy); Caponetti, Eugenio [University of Palermo CGA-UniNetLab, Palermo (Italy); University of Palermo, Department STEBICEF, Palermo (Italy); Armetta, Francesco [University of Palermo, Department STEBICEF, Palermo (Italy); Leonelli, Cristina [University of Modena and Reggio Emilia, Department of Engineering “Enzo Ferrari”, Modena (Italy)

    2015-04-09

    Highlights: • Inertization of chromium liquid waste in aluminosilicate matrix. • Water less inertization technique exploiting the waste water content. • Liquid waste inertization without drying step. • Long term stabilization study through leaching test. • SEM analysis and {sup 29}Si and {sup 27}Al MAS NMR in relation with long curing time. - Abstract: A class of inorganic binders, also known as geopolymers, can be obtained by alkali activation of aluminosilicate powders at room temperature. The process is affected by many parameters (curing time, curing temperature, relative humidity etc.) and leads to a resistant matrix usable for inertization of hazardous waste. In this study an industrial liquid waste containing a high amount of chromium (≈2.3 wt%) in the form of metalorganic salts is inertized into a metakaolin based geopolymer matrix. One of the innovative aspects is the exploitation of the water contained in the waste for the geopolymerization process. This avoided any drying treatment, a common step in the management of liquid hazardous waste. The evolution of the process - from the precursor dissolution to the final geopolymer matrix hardening - of different geopolymers containing a waste amount ranging from 3 to 20% wt and their capability to inertize chromium cations were studied by: i) the leaching tests, according to the EN 12,457 regulation, at different curing times (15, 28, 90 and 540 days) monitoring releases of chromium ions (Cr(III) and Cr(VI)) and the cations constituting the aluminosilicate matrix (Na, Si, Al); ii) the humidity variation for different curing times (15 and 540 days); iii) SEM characterization at different curing times (28 and 540 days); iv) the trend of the solution conductivity and pH during the leaching test; v) the characterization of the short-range ordering in terms of T−O−T bonds (where T is Al or Si) by {sup 29}Si and {sup 27}Al solid state magic-angle spinning nuclear magnetic resonance (ss MAS NMR) for

  16. Enzyme-assisted extraction and ionic liquid-based dispersive liquid-liquid microextraction followed by high-performance liquid chromatography for determination of patulin in apple juice and method optimization using central composite design.

    Science.gov (United States)

    Mohammadi, Abdorreza; Tavakoli, Rouya; Kamankesh, Marzieh; Rashedi, Hamid; Attaran, Abdolmohammad; Delavar, Mostafa

    2013-12-04

    A simple and highly sensitive analytical methodology for isolation and determination of patulin in apple-juice samples, based on enzyme-assisted extraction (EAE) and ionic liquid-based dispersive liquid-liquid microextraction (IL-DLLME) was developed and optimized. Enzymes play essential roles in eliminating interference and increasing the extraction efficiency of patulin. Apple-juice samples were treated with pectinase and amylase. A mixture of 80 μL ionic liquid and 600 μL methanol (disperser solvent) was used for the IL-DLLME process. The sedimented phase was analyzed by high-performance liquid chromatography (HPLC). Experimental parameters controlling the performance of DLLME, were optimized using response surface methodology (RSM) based on central composite design (CCD). Under optimum conditions, the calibration curves showed high levels of linearity (R(2)>0.99) for patulin in the range of 1-200 ng g(-1). The relative standard deviation (RSD) for the seven analyses was 7.5%. The limits of detection (LOD) and limits of quantification (LOQ) were 0.15 ng g(-1) and 0.5 ng g(-1), respectively. The merit figures, compared with other methods, showed that new proposed method is an accurate, precise and reliable sample-pretreatment method that substantially reduces sample matrix interference and gives very good enrichment factors and detection limits for investigation trace amount of patulin in apple-juice samples. Copyright © 2013 Elsevier B.V. All rights reserved.

  17. Monitoring gross alpha and beta activity in liquids by using ZnS(Ag) scintillation detectors

    Energy Technology Data Exchange (ETDEWEB)

    Stevanato, L.; Cester, D.; Filippi, D.; Lunardon, M.; Mistura, G.; Moretto, S.; Viesti, G. [Department of Physics and Astronomy ' Galileo Galilei' , University of Padova, (Italy); Badocco, D.; Pastore, P.; Romanini, F. [Department of Chemical Sciences, University of Padova, (Italy)

    2015-07-01

    In this work the possibility of monitoring gross alpha and beta activity in liquids using EJ-444 was investigated. Specific tests were carried out to determine the change of the detector properties in water tests. Possible protecting coating is also proposed and tested. Alpha/beta real-time monitoring in liquids is a goal of the EU project TAWARA{sub R}TM. (authors)

  18. Highly conductive ionic liquids toward high-performance space-lubricating greases.

    Science.gov (United States)

    Fan, Xiaoqiang; Wang, Liping

    2014-08-27

    Although ionic liquids (ILs) as a class of promising materials have a wide range of applications due to the excellent properties, their potential as space lubricants has been not systematically explored. Here two kinds of conductive alkyl imidazolium ILs greases were prepared using 1-hexyl-3-methylimidazolium tetrafluoroborate (LB106) and 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl) amide (L-F106) as base oil and the polytetrafluoroethylene (PTFE) as thickener, with multiple-alkylated cyclopentane grease (MACs) as a comparison. Their chemical composition and tribological properties were investigated in detail under simulated space environment which is composed of high vacuum, high temperature and irradiation. Results show that the high conductive ILs greases not only possess good adaptive abilities to space environment and thermal stability but also provide excellent friction reducing and antiwear behaviors as well as high load carrying capacities. The unique physicochemical properties are attributed to a combination of special anions and cations, the excellent tribological properties are strongly dependent on a boundary protective film on the rubbing surfaces.

  19. LiXEdrom: High Energy Resolution RIXS Station dedicated to Liquid Investigation at BESSY II

    Directory of Open Access Journals (Sweden)

    Emad Flear Aziz

    2016-06-01

    Full Text Available LiXEdrom is an experimental station dedicated to high resolution RIXS measurements on liquid samples. It is equipped with two VLS gratings and advanced photon detector (MCP/phosphorous screen/CCD, covering soft X-ray range of 200 – 1200 eV. The efficient differential pumping and cooling systems ensure successful executions of X-ray spectroscopy on liquid samples in vacuum. Liquid samples are introduced into the vacuum chamber by micro-jet or flow-cell techniques.

  20. Immune cell activation from multivalent interactions with liquid-crystalline polycation-DNA complexes

    Science.gov (United States)

    Schmidt, Nathan; Jin, Fan; Lande, Roberto; Curk, Tine; Xian, Wujing; Frasca, Loredana; Dobnikar, Jure; Frenkel, Daan; Gilliet, Michel; Wong, Gerard

    2014-03-01

    Microbial DNA can trigger type I interferon (IFN) production in plasmacytoid cells (pDCs) by binding to endosomal toll-like receptor 9 (TLR9). TLR9 in pDCs do not normally respond to self-DNA, but in certain autoimmune diseases self-DNA can complex with the polycationic antimicrobial peptide LL37 into condensed structures which allow DNA to access endosomal compartments and stimulate TLR9 in pDCs. We use x-ray studies and cell measurements of IFN secretion by pDCs to show that a broad range of polycation-DNA complexes stimulate pDCs and elucidate the criterion for high IFN production. Furthermore, we show via experiments and computer simulations that the distinguishing factor for why certain complexes activate pDCs while others do not is the self-assembled structure of the liquid-crystalline polycation-DNA complex.

  1. Toluene biodegradation in a solid/liquid system involving immobilized activated sludge and silicone oil as pollutant reservoir.

    Science.gov (United States)

    Diz Castro, Manuel; Gómez-Díaz, Diego; Amrane, Abdeltif; Couvert, Annabelle

    2015-01-01

    A solid/liquid system involving activated sludge immobilized in an agar medium and a non-aqueous phase liquid containing the target pollutant has been considered to treat a model hydrophobic volatile organic compound, toluene. The positive impact of the use of a multiphase bioreactor is that the organic phase constitutes a pollutant reservoir and also helps to overcome possible pollutant toxicity. In addition and to overcome the drawbacks of the use of a solid organic phase (high pressure drop and low mass transfer) instead of a liquid organic phase, the considered solid phase was the aqueous. Consequently, silicone oil (polydimethylsiloxane) which showed its relevance for implementation in multiphase bioreactors was used. Promising results were observed from the analysis of toluene in the gaseous phase; for an initial amount of 2 g L(-1) related to the organic phase, a v/v ratio of 0.5 of the organic phase to the aqueous agar phase, total toluene consumption was observed in about 9 days, leading to a global biodegradation rate of approximately 3.1 mg L(-1) h(-1), namely in the range of values previously observed in liquid/liquid systems.

  2. High temperature ceramic membrane reactors for coal liquid upgrading

    Energy Technology Data Exchange (ETDEWEB)

    Tsotsis, T.T.

    1992-01-01

    In this project we will study a novel process concept, i.e., the use of ceramic membrane reactors in upgrading of coal model compounds and coal derived liquids. In general terms, the USC research team is responsible for constructing and operating the membrane reactor apparatus and for testing various inorganic membranes for the upgrading of coal derived asphaltenes and coal model compounds. The USC effort will involve the principal investigator of this project and two graduate research assistants. The ALCOA team is responsible for the preparation of the inorganic membranes, for construction and testing of the ceramic membrane modules, and for measurement of their transport properties. The ALCOA research effort will involve Dr. Paul K. T. Liu, who is the project manager of the ALCOA research team, an engineer and a technician. UNOCAL's contribution will be limited to overall technical assistance in catalyst preparation and the operation of the laboratory upgrading membrane reactor and for analytical back-up and expertise in oil analysis and materials characterization. UNOCAL is a no-cost contractor but will be involved in all aspects of the project, as deemed appropriate.

  3. Protein mapping by two-dimensional high performance liquid chromatography

    NARCIS (Netherlands)

    Wagner, K.; Racaityte, K.; Unger, K.K.; Miliotis, T.; Edholm, L.E.; Bischoff, Rainer; Marko-Varga, G

    2000-01-01

    Current developments in drug discovery in the pharmaceutical industry require highly efficient analytical systems for protein mapping providing high resolution, robustness, sensitivity, reproducibility and a high throughput of samples. The potential of two-dimensional (2D) HPLC as a complementary

  4. Bimolecular electron transfer in ionic liquids: are reaction rates anomalously high?

    Science.gov (United States)

    Liang, Min; Kaintz, Anne; Baker, Gary A; Maroncelli, Mark

    2012-02-02

    Steady-state and picosecond time-resolved emission spectroscopy are used to monitor the bimolecular electron transfer reaction between the electron acceptor 9,10-dicyanoanthracene in its S(1) state and the donor N,N-dimethylaniline in a variety of ionic liquids and several conventional solvents. Detailed study of this quenching reaction was undertaken in order to better understand why rates reported for similar diffusion-limited reactions in ionic liquids sometimes appear much higher than expected given the viscous nature of these liquids. Consistent with previous studies, Stern-Volmer analyses of steady-state and lifetime data provide effective quenching rate constants k(q), which are often 10-100-fold larger than simple predictions for diffusion-limited rate constants k(D) in ionic liquids. Similar departures from k(D) are also observed in conventional organic solvents having comparably high viscosities, indicating that this behavior is not unique to ionic liquids. A more complete analysis of the quenching data using a model combining approximate solution of the spherically symmetric diffusion equation with a Marcus-type description of electron transfer reveals the reasons for frequent observation of k(q) ≫ k(D). The primary cause is that the high viscosities typical of ionic liquids emphasize the transient component of diffusion-limited reactions, which renders the interpretation of rate constants derived from Stern-Volmer analyses ambiguous. Using a more appropriate description of the quenching process enables satisfactory fits of data in both ionic liquid and conventional solvents using a single set of physically reasonable electron transfer parameters. Doing so requires diffusion coefficients in ionic liquids to exceed hydrodynamic predictions by significant factors, typically in the range of 3-10. Direct, NMR measurements of solute diffusion confirm this enhanced diffusion in ionic liquids.

  5. Ionic liquids and ionic liquid acids with high temperature stability for fuel cell and other high temperature applications, method of making and cell employing same

    Science.gov (United States)

    Angell, C Austen [Mesa, AZ; Xu, Wu [Broadview Heights, OH; Belieres, Jean-Philippe [Chandler, AZ; Yoshizawa, Masahiro [Tokyo, JP

    2011-01-11

    Disclosed are developments in high temperature fuel cells including ionic liquids with high temperature stability and the storage of inorganic acids as di-anion salts of low volatility. The formation of ionically conducting liquids of this type having conductivities of unprecedented magnitude for non-aqueous systems is described. The stability of the di-anion configuration is shown to play a role in the high performance of the non-corrosive proton-transfer ionic liquids as high temperature fuel cell electrolytes. Performance of simple H.sub.2(g) electrolyte/O.sub.2(g) fuel cells with the new electrolytes is described. Superior performance both at ambient temperature and temperatures up to and above 200.degree. C. are achieved. Both neutral proton transfer salts and the acid salts with HSO.sup.-.sub.4 anions, give good results, the bisulphate case being particularly good at low temperatures and very high temperatures. The performance of all electrolytes is improved by the addition of a small amount of involatile base of pK.sub.a value intermediate between those of the acid and base that make the bulk electrolyte. The preferred case is the imidazole-doped ethylammonium hydrogensulfate which yields behavior superior in all respects to that of the industry standard phosphoric acid electrolyte.

  6. High Temperature Ultrasonic Transducers for In-Service Inspection of Liquid Metal Fast Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, Jeffrey W.; Posakony, Gerald J.; Harris, Robert V.; Baldwin, David L.; Jones, Anthony M.; Bond, Leonard J.

    2011-12-31

    In-service inspection of liquid metal (sodium) fast reactors requires the use of ultrasonic transducers capable of operating at high temperatures (>200°C), high gamma radiation fields, and the chemically reactive liquid sodium environment. In the early- to mid-1970s, the U.S. Atomic Energy Commission supported development of high-temperature, submersible single-element transducers, used for scanning and under-sodium imaging in the Fast Flux Test Facility and the Clinch River Breeder Reactor. Current work is building on this technology to develop the next generation of high-temperature linear ultrasonic transducer arrays for under-sodium viewing and in-service inspections.

  7. Microchip systems for imaging liquid and high temperature processes in TEM & SEM

    DEFF Research Database (Denmark)

    Jensen, Eric; Canepa, Silvia; Møller-Nilsen, Rolf Erling Robberstad

    2014-01-01

    measurementson high temperature fuel cell systems. For imaging processes in liquids, our SEM system enables imaging on-chip microelectrodes andusing standard built-in reference electrodes [2]. To get higher resolution in TEM, we have createda monolithic chip system with suspended microfabricated channels [3......]. Both systems will allowhigh resolution imaging of heterogeneous electrochemical processes such as those in batteries.Based on the suspended microfluidic channels, we are also developing microchips that enableultrafast freezing of processes in liquids....

  8. Nanoscale Carbon Greatly Enhances Mobility of a Highly Viscous Ionic Liquid

    DEFF Research Database (Denmark)

    Chaban, V. V.; Prezhdo, O. V.

    2014-01-01

    liquids (ILs) and apolar carbon nanotubes (CNTs) are disparate objects; nevertheless, their interaction leads to spontaneous CNT filling with ILs. Moreover, ionic diffusion of highly viscous ILs can increase 5-fold inside CNTs, approaching that of molecular liquids, even though the confined IL phase still...... phenomena. Governed by internal energy and entropy rather than external work, the kinetics of CNT filling is characterized in detail The significant growth of the IL mobility induced by nanoscale carbon promises important advances in electricity storage devices....

  9. Do shape invariant solitons in highly nonlocal nematic liquid crystals really exist?

    CERN Document Server

    Petrovic, Milan S; Aleksic, Najdan B; Belic, Milivoj R

    2011-01-01

    We question physical existence of shape invariant solitons in three dimensional nematic liquid crystals. Using modified Petviashvili's method for finding eigenvalues and eigenfunctions, we determine shape invariant solitons in a realistic physical model that includes the highly nonlocal nature of the liquid crystal system. We check the stability of such solutions by propagating them for long distances. We establish that any noise added to the medium or to the fundamental solitons induces them to breathe, rendering them practically unobservable.

  10. Visualizing the Mixed Bonding Properties of Liquid Boron with High-Resolution X-Ray Compton Scattering

    Science.gov (United States)

    Okada, J. T.; Sit, P. H.-L.; Watanabe, Y.; Barbiellini, B.; Ishikawa, T.; Wang, Y. J.; Itou, M.; Sakurai, Y.; Bansil, A.; Ishikawa, R.; Hamaishi, M.; Paradis, P.-F.; Kimura, K.; Ishikawa, T.; Nanao, S.

    2015-05-01

    Bonding characteristics of liquid boron at 2500 K are studied by using high-resolution Compton scattering. An excellent agreement is found between the measurements and the corresponding Car-Parrinello molecular dynamics simulations. Covalent bond pairs are clearly shown to dominate in liquid boron along with the coexistence of diffuse pairs. Our study reveals the complex bonding pattern of liquid boron and gives insight into the unusual properties of this high-temperature liquid.

  11. Comparison of antioxidant activities of different parts from snow chrysanthemum (Coreopsis tinctoria Nutt.) and identification of their natural antioxidants using high performance liquid chromatography coupled with diode array detection and mass spectrometry and 2,2'-azinobis(3-ethylbenzthiazoline-sulfonic acid)diammonium salt-based assay.

    Science.gov (United States)

    Chen, L X; Hu, D J; Lam, S C; Ge, L; Wu, D; Zhao, J; Long, Z R; Yang, W J; Fan, B; Li, S P

    2016-01-08

    Snow chrysanthemum (Coreopsis tinctoria Nutt.), a world-widely well-known flower tea material, has attracted more and more attention because of its beneficial health effects such as antioxidant activity and special flavor. In this study, a high performance liquid chromatography coupled with diode array detection and mass spectrometry (HPLC-DAD-MS) and 2,2'-azinobis(3-ethylbenzthiazoline-sulfonic acid)diammonium salt (ABTS) based assay was employed for comparison and identification of antioxidants in different samples of snow chrysanthemum. The results showed that snow chrysanthemum flowers possessed the highest while stems presented the lowest antioxidant capacities. Fourteen detected peaks with antioxidant activity were temporarily identified as 3,4',5,6,7-pentahydroxyflavanone-O-hexoside, chlorogenic acid, 2R-3',4',8-trihydroxyflavanone-7-O-glucoside, flavanomarein, flavanocorepsin, flavanokanin, quercetagitin-7-O-glucoside, 3',5,5',7-tetrahydroxyflavanone-O-hexoside, marein, maritimein, 1,3-dicaffeoylquinic acid, coreopsin, okanin and acetyl-marein by comparing their UV spectra, retention times and MS data with standards or literature data. Antioxidants existed in snow chrysanthemum are quite different from those reported in Chrysanthemum morifolium, a well-known traditional beverage in China, which indicated that snow chrysanthemum may be a promising herbal tea material with obvious antioxidant activity. Copyright © 2015 Elsevier B.V. All rights reserved.

  12. Analysis of biogenic amines in wines by salting-out assisted liquid-liquid extraction and high-performance liquid chromatography with fluorimetric detection.

    Science.gov (United States)

    Ramos, Rui Miguel; Valente, Inês Maria; Rodrigues, José António

    2014-06-01

    Biogenic amines are nitrogenous organic compounds of low molecular weight that are either formed or metabolized in cells of living organisms and can be found in several food products, being produced mainly by amino acid decarboxylation. When ingested in high concentrations they can induce several health problems in humans. In alcoholic beverages, and especially in wine, they are formed during the vinification process as a result of the action of microorganisms. In this work it is proposed a new methodology for the determination of biogenic amines in wines, which includes a sample preparation approach based on salting-out assisted liquid-liquid extraction, the use of dansyl chloride for the derivatization and chromatographic separation by high-performance liquid chromatography with fluorimetric detection. The salting-out effect is used to promote phase separation between water and a water-miscible organic solvent, while improving the extraction of organic or inorganic species. Several extraction parameters were optimized, such as the dansyl chloride concentration, pH and the effects caused by the order in which the extraction and derivatization were performed. Extraction of amines, and consequent detection, depends on the presence of dansyl chloride in solution prior to extraction. The results showed the possibility to simultaneously perform the extraction and the derivatization, making sample preparation easier and less time-consuming. The methodology was successfully applied to the determination of biogenic amines in five wines (white, red and rosé). This method has the potential to be a good alternative to existing methods since it is cheaper, easier and simplifies the sample preparation step. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Highly Sensitive Liquid Core Temperature Sensor Based on Multimode Interference Effects

    Directory of Open Access Journals (Sweden)

    Miguel A. Fuentes-Fuentes

    2015-10-01

    Full Text Available A novel fiber optic temperature sensor based on a liquid-core multimode interference device is demonstrated. The advantage of such structure is that the thermo-optic coefficient (TOC of the liquid is at least one order of magnitude larger than that of silica and this, combined with the fact that the TOC of silica and the liquid have opposite signs, provides a liquid-core multimode fiber (MMF highly sensitive to temperature. Since the refractive index of the liquid can be easily modified, this allows us to control the modal properties of the liquid-core MMF at will and the sensor sensitivity can be easily tuned by selecting the refractive index of the liquid in the core of the device. The maximum sensitivity measured in our experiments is 20 nm/°C in the low-temperature regime up to 60 °C. To the best of our knowledge, to date, this is the largest sensitivity reported for fiber-based MMI temperature sensors.

  14. Graphene-Analogues Boron Nitride Nanosheets Confining Ionic Liquids: A High-Performance Quasi-Liquid Solid Electrolyte.

    Science.gov (United States)

    Li, Mingtao; Zhu, Wenshuai; Zhang, Pengfei; Chao, Yanhong; He, Qian; Yang, Bolun; Li, Huaming; Borisevich, Albinab; Dai, Sheng

    2016-07-01

    Solid electrolytes are one of the most promising electrolyte systems for safe lithium batteries, but the low ionic conductivity of these electrolytes seriously hinders the development of efficient lithium batteries. Here, a novel class of graphene-analogues boron nitride (g-BN) nanosheets confining an ultrahigh concentration of ionic liquids (ILs) in an interlayer and out-of-layer chamber to give rise to a quasi-liquid solid electrolyte (QLSE) is reported. The electron-insulated g-BN nanosheet host with a large specific surface area can confine ILs as much as 10 times of the host's weight to afford high ionic conductivity (3.85 × 10(-3) S cm(-1) at 25 °C, even 2.32 × 10(-4) S cm(-1) at -20 °C), which is close to that of the corresponding bulk IL electrolytes. The high ionic conductivity of QLSE is attributed to the enormous absorption for ILs and the confining effect of g-BN to form the ordered lithium ion transport channels in an interlayer and out-of-layer of g-BN. Furthermore, the electrolyte displays outstanding electrochemical properties and battery performance. In principle, this work enables a wider tunability, further opening up a new field for the fabrication of the next-generation QLSE based on layered nanomaterials in energy conversion devices. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Highly efficient enantioselective liquid-liquid extraction of 1,2-amino-alcohols using SPINOL based phosphoric acid hosts.

    Science.gov (United States)

    Pinxterhuis, Erik B; Gualtierotti, Jean-Baptiste; Heeres, Hero J; de Vries, Johannes G; Feringa, Ben L

    2017-09-01

    Access to enantiopure compounds on large scale in an environmentally friendly and cost-efficient manner remains one of the greatest challenges in chemistry. Resolution of racemates using enantioselective liquid-liquid extraction has great potential to meet that challenge. However, a relatively feeble understanding of the chemical principles and physical properties behind this technique has hampered the development of hosts possessing sufficient resolving power for their application to large scale processes. Herein we present, employing the previously untested SPINOL based phosphoric acids host family, an in depths study of the parameters affecting the efficiency of the resolution of amino-alcohols in the optic of further understanding the core principles behind ELLE. We have systematically investigated the dependencies of the enantioselection by parameters such as the choice of solvent, the temperature, as well as the pH and bring to light many previously unsuspected and highly intriguing interactions. Furthermore, utilizing these new insights to our advantage, we developed novel, highly efficient, extraction and resolving protocols which provide remarkable levels of enantioselectivity. It was shown that the extraction is catalytic in host by demonstrating transport in a U-tube and finally it was demonstrated how the solvent dependency could be exploited in an unprecedented triphasic resolution system.

  16. Noble Liquid (Xenon or Krypton) Totally Active Calorimetry

    CERN Multimedia

    2002-01-01

    Main Goals\\\\ \\\\ Determine ionization and scintillation yields in liquid Xenon (LXe) or Krypton.\\\\ \\\\ Determine the electron lifetime and photon mean free path in LXe or LKr. \\\\ \\\\ Determine energy resolution of LXe or LKr via ionization or scintillation.\\\\ \\\\ Determine correlation of fluctuations between ionization and scintillation. Summary of Results \\\\ \\\\ -~measured the electron lifetime in LXe, ($\\tau$~$>$~400 $\\mu$s).\\\\ \\\\ -~measured the energy to create an ionization electron in LXe, W=9.8 eV.\\\\ \\\\ -~measured the energy to create a LXe scintillation photon, W$ _{s} $~=~14.2~eV. \\\\ \\\\ -~measured the anticorrelation of scintillation and ionization yields. \\\\ \\\\ -~measured the energy resolution in LXe via ionization, $ sigma _{E} / $E=0.07\\%/$\\sqrt$E(GeV). \\\\ \\\\ -~measured resolution in LXe via scintillation $ sigma _{E} / $E=0.24\\%/$\\sqrt$E(GeV)+0.26\\%. \\\\ \\\\ -~measured electron drift velocity in LXe:~neat (2.5 mm/$\\mu$s), doped (4.4~mm/$\\mu$s). \\\\ \\\\ -~measured the photon mean free path in LXe vs $ lambd...

  17. Three-dimensional graphitized carbon nanovesicles for high-performance supercapacitors based on ionic liquids.

    Science.gov (United States)

    Peng, Chengxin; Wen, Zubiao; Qin, Yao; Schmidt-Mende, Lukas; Li, Chongzhong; Yang, Shihe; Shi, Donglu; Yang, Jinhu

    2014-03-01

    Three-dimensional nanoporous carbon with interconnected vesicle-like pores (1.5-4.2 nm) has been prepared through a low-cost, template-free approach from petroleum coke precursor by KOH activation. It is found that the thin pore walls are highly graphitized and consist of only three to four layers of graphene, which endows the material with an unusually high specific surface area (2933 m(2)  g(-1) ) and good conductivity. With such unique structural characteristics, if used as supercapacitor electrodes in ionic liquid (IL) electrolytes, the graphitized carbon nanovesicle (GCNV) material displays superior performance, such as high energy densities up to 145.9 Wh kg(-1) and a high combined energy-power delivery, and an energy density of 97.6 Wh kg(-1) can be charged in 47 s at 60 °C. This demonstrates that the energy output of the GCNV-based supercapacitors is comparable to that of batteries, and the power output is one order of magnitude higher. Moreover, the synergistic effect of the GCNVs and the IL electrolyte on the extraordinary performance of the GCNV supercapacitors has been analyzed and discussed. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Controlling Solid–Liquid Conversion Reactions for a Highly Reversible Aqueous Zinc–Iodine Battery

    Energy Technology Data Exchange (ETDEWEB)

    Pan, Huilin; Li, Bin; Mei, Donghai; Nie, Zimin; Shao, Yuyan; Li, Guosheng; Li, Xiaohong S.; Han, Kee Sung; Muller, Karl T.; Sprenkle, Vincent L.; Liu, Jun

    2017-10-30

    Aqueous rechargeable batteries are desirable for many energy storage applications due to their low cost and high safety. However, low capacity and short cycle life are the significant obstacles to their practical applications. Here, we demonstrate a highly reversible aqueous zinc-iodine battery using encapsulated iodine in microporous active carbon fibers (ACFs) as cathode materials through the rational control of solid-liquid conversion reactions. The experiments and density function theory (DFT) calculations were employed to investigate the effects of solvents and properties of carbon hosts, e.g. pore size, surface chemistries, on the adsorption of iodine species. The rational manipulation of the competition between the adsorption in carbon and solvation in electrolytes for iodine species is responsible for the high reversibility and cycling stability. The zinc-iodine batteries deliver a high capacity of 180 mAh g-1 at 1C and a stable cycle life over 3000 cycles with ~90% capacity retention as well as negligible self-discharge. We believe the principles for stabilizing the zinc-iodine system could provide new insight into conversion systems such as Li-S systems.

  19. Development of a test system for high level liquid waste partitioning

    Directory of Open Access Journals (Sweden)

    Duan Wu H.

    2015-01-01

    Full Text Available The partitioning and transmutation strategy has increasingly attracted interest for the safe treatment and disposal of high level liquid waste, in which the partitioning of high level liquid waste is one of the critical technical issues. An improved total partitioning process, including a tri-alkylphosphine oxide process for the removal of actinides, a crown ether strontium extraction process for the removal of strontium, and a calixcrown ether cesium extraction process for the removal of cesium, has been developed to treat Chinese high level liquid waste. A test system containing 72-stage 10-mm-diam annular centrifugal contactors, a remote sampling system, a rotor speed acquisition-monitoring system, a feeding system, and a video camera-surveillance system was successfully developed to carry out the hot test for verifying the improved total partitioning process. The test system has been successfully used in a 160 hour hot test using genuine high level liquid waste. During the hot test, the test system was stable, which demonstrated it was reliable for the hot test of the high level liquid waste partitioning.

  20. Gas Holding mechanism and Impeller Structure Optimization of High Efficiency Gas-Liquid Mixer

    Directory of Open Access Journals (Sweden)

    Li Jing Rui

    2017-01-01

    Full Text Available This research aims at researching one high efficiency gas-liquid mixer which can be applied under high gas content condition and can overcome the limited application of sedimentation and rotary oil-gas separator for electric submersible pump. Standard k-ε model and population balance model of the Fluent are applied to simulate the gas-liquid two-phase flow in high efficiency gas-liquid mixer. The internal flow field of impeller opening with different radius and amounts are simulated. The gas holding mechanism of high efficiency gas-liquid mixer is also analyzed. Then according to the gas particle size at the output of impeller, the optimized structure parameter can be obtained. The simulation results show that part of the high pressure liquid at impeller outlet would form cross flow with fluid in normal flowing inside the impeller passage to produce strong shear friction inside the area and burst a large amount of bubbles accumulated in the area. Also, it is proved to be more beneficial for breaking bubble and dealing with gas under the circumstances that gas content at the input is higher than 35%, opening diameter of impeller is Φ4.8mm and opening amount of impeller is 2.

  1. Analyzing Activities of Lytic Polysaccharide Monooxygenases by Liquid Chromatography and Mass Spectrometry.

    Science.gov (United States)

    Westereng, Bjørge; Arntzen, Magnus Ø; Agger, Jane Wittrup; Vaaje-Kolstad, Gustav; Eijsink, Vincent G H

    2017-01-01

    Lytic polysaccharide monooxygenases perform oxidative cleavage of glycosidic bonds in various polysaccharides. The majority of LMPOs studied so far possess activity on either cellulose or chitin and analysis of these activities is therefore the main focus of this review. Notably, however, the number of LPMOs that are active on other polysaccharides is increasing. The products generated by LPMOs from cellulose are either oxidized in the downstream end (at C1) or upstream end (at C4), or at both ends. These modifications only result in small structural changes, which makes both chromatographic separation and product identification by mass spectrometry challenging. The changes in physicochemical properties that are associated with oxidation need to be considered when choosing analytical approaches. C1 oxidation leads to a sugar that is no longer reducing but instead has an acidic functionality, whereas C4 oxidation leads to products that are inherently labile at high and low pH and that exist in a keto-gemdiol equilibrium that is strongly shifted toward the gemdiol in aqueous solutions. Partial degradation of C4-oxidized products leads to the formation of native products, which could explain why some authors claim to have observed glycoside hydrolase activity for LPMOs. Notably, apparent glycoside hydrolase activity may also be due to small amounts of contaminating glycoside hydrolases since these normally have much higher catalytic rates than LPMOs. The low catalytic turnover rates of LPMOs necessitate the use of sensitive product detection methods, which limits the analytical possibilities considerably. Modern liquid chromatography and mass spectrometry have become essential tools for evaluating LPMO activity, and this chapter provides an overview of available methods together with a few novel tools. The methods described constitute a suite of techniques for analyzing oxidized carbohydrate products, which can be applied to LPMOs as well as other carbohydrate-active

  2. Nearly-analogue blazed phase grating using high birefringence liquid crystal

    Science.gov (United States)

    Bennis, N.; Geday, M. A.; Quintana, X.; Cerrolaza, B.; Medialdea, D. P.; Spadło, A.; Dąbrowski, R.; Otón, J. M.

    2009-06-01

    Diffraction of liquid crystal gratings has been thoroughly studied for many applications such as diffraction optics, optical processing, and spectral analysis. In pure optical processing one varies the direction of propagation of light beam without any mechanical adjustment. In this work we propose a beam steering device using highly birefringent liquid crystal material. Using a highly birefringent material one can reduce the LC layer thickness needed to achieve 2π of phase modulation and thus reduce the fringing effect caused by deformation of the electric field at the edge of the pixel. Here, we present 1.5-µm thick, high-resolution diffraction grating with non-detectable fringing.

  3. Formation and post-formation dynamics of bacterial biofilm streamers as highly viscous liquid jets

    CERN Document Server

    Das, Siddhartha

    2013-01-01

    It has been recently reported that in presence of low Reynolds number (Re<<1) transport, preformed bacterial biofilms, several hours after their formation, may degenerate in form of filamentous structures, known as streamers. In this letter, we explain that such streamers form as the highly viscous liquid states of the intrinsically viscoelastic biofilms. Such "viscous liquid" state can be hypothesized by noting that the time of appearance of the streamers is substantially larger than the viscoelastic relaxation time scale of the biofilms, and this appearance is explained by the inability of a viscous liquid to withstand an external shear. Further, by identifying the post formation dynamics of the streamers as that of a viscous liquid jet in a surrounding flow field, we can interpret several unexplained issues associated with the post-formation dynamics of streamers, such as the clogging of the flow passage or the exponential time growth of streamer dimensions.

  4. Fabrication and evaluation of magnetic activated carbon as adsorbent for ultrasonic assisted magnetic solid phase dispersive extraction of bisphenol A from milk prior to high performance liquid chromatographic analysis with ultraviolet detection.

    Science.gov (United States)

    Filippou, Olga; Deliyanni, Eleni A; Samanidou, Victoria F

    2017-01-06

    In the present study, the impregnation of a micro - meso porous activated carbon with magnetite (Fe3O4) was successfully achieved by sonication and the magnetic activated carbon prepared (Bmi) was evaluated as a new adsorbent for ultrasonic assisted magnetic solid phase dispersive extraction of Bisphenol A (BPA) from cow milk and human breast milk samples, prior to the determination by HPLC with UV detection. The prepared Bmi was characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). The effect of pH on adsorption, initial concentration, contact time and desorption were studied. The main experimental parameters influencing extraction efficiency of BPA, such as type and amount of the adsorbent, sample amount, type of desorption solvent, time of adsorption and desorption, type of precipitation solvent, were investigated and optimized. Under the optimal extraction conditions the absolute recovery of BPA was 81% and 95% in cow milk and human breast milk samples, respectively. Good linearity was observed in the investigated concentration range of 2.5μgkg(-1)-5000μgkg(-1) (R(2)=0.9997). Limit of detection (LOD) was 0.75μgL(-1), which is in accordance with the specific migration limit (SML) established by the European Union, and limit of quantification (LOQ) was 2.5μgL(-1). Within-day and between-day recoveries ranged from 91.4% to 98.6% and 89.1% to 99.4% respectively and the RSDs were less than 3.7%. Due to the excellent magnetic behavior of Bmi the proposed method was shown to be simple and rapid. Besides these, this method is sensitive, low cost, efficient and environmentally friendly. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Rapid extraction and determination of amphetamines in human urine samples using dispersive liquid-liquid microextraction and solidification of floating organic drop followed by high performance liquid chromatography.

    Science.gov (United States)

    Ahmadi-Jouibari, Toraj; Fattahi, Nazir; Shamsipur, Mojtaba

    2014-06-01

    A novel, rapid, simple and sensitive dispersive liquid-liquid microextraction method based on the solidification of floating organic drop (DLLME-SFO) combined with high-performance liquid chromatography-ultraviolet detection (HPLC-UV) was used to determine amphetamine and methamphetamine in urine samples. The factors affecting the extraction efficiency of DLLME-SFO such as the kind and volume of the extraction and the disperser solvents, effect of concentration of K2CO3 and extraction time were investigated and the optimal extraction conditions were established. Under the optimum conditions (extraction solvent: 30.0μl 1-undecanol; disperser solvent: 300μl acetonitrile; buffer concentration: 2% (w/v) K2CO3 and extraction time: 1min), calibration curves are linear in the range of 10-3000μgl(-1) and limit of detections (LODs) are in the range of 2-8μgl(-1). The relative standard deviations (RSDs) for 100μgl(-1) of amphetamine and methamphetamine in diluted urine are in the range of 6.2-7.8% (n=7). The method was successfully applied for the determination of amphetamine and methamphetamine in the actual urine samples. The relative recoveries of urine samples spiked with amphetamine and methamphetamine are 87.8-113.2%. The obtained results show that DLLME-SFO combined with HPLC-UV is a fast and simple method for the determination of amphetamine and methamphetamine in urine. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Ionic-liquid-based ultrasound-assisted extraction of isoflavones from Belamcanda chinensis and subsequent screening and isolation of potential α-glucosidase inhibitors by ultrafiltration and semipreparative high-performance liquid chromatography.

    Science.gov (United States)

    Li, Senlin; Li, Sainan; Huang, Yu; Liu, Chunming; Chen, Lina; Zhang, Yuchi

    2017-06-01

    The separation of a compound of interest from its structurally similar homologues to produce high-purity natural products is a challenging problem. This work proposes a novel method for the separation of iristectorigenin A from its structurally similar homologues by ionic-liquid-based ultrasound-assisted extraction and the subsequent screening and isolation of potential α-glucosidase inhibitors via ultrafiltration and semipreparative high-performance liquid chromatography. Ionic-liquid-based ultrasound-assisted extraction was successfully applied to the extraction of tectorigenin, iristectorigenin A, irigenin, and irisflorentin from Belamcanda chinensis. The optimum conditions for the efficient extraction of isoflavones were determined as 1.0 M 1-ethyl-3-methylimidazolium tetrafluoroborate with extraction time of 30 min and a solvent to solid ratio of 30 mL/g. Ultrafiltration with liquid chromatography and mass spectrometry was applied to screen and identify α-glucosidase inhibitors from B. chinensis, followed by the application of semipreparative high-performance liquid chromatography to separate and isolate the active constituents. Four major compounds including tectorigenin, iristectorigenin A, irigenin, and irisflorentin were screened and identified as α-glucosidase inhibitors, and then the four active compounds abovementioned were subsequently isolated by semipreparative high-performance liquid chromatography (99.89, 88.97, 99.79, and 99.97% purity, respectively). The results demonstrate that ionic liquid extraction can be successfully applied to the extraction of isoflavones from B. chinensis. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Liquid Fuel Production from Biomass via High Temperature Steam Electrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Grant L. Hawkes; Michael G. McKellar

    2009-11-01

    A process model of syngas production using high temperature electrolysis and biomass gasification is presented. Process heat from the biomass gasifier is used to heat steam for the hydrogen production via the high temperature steam electrolysis process. Hydrogen from electrolysis allows a high utilization of the biomass carbon for syngas production. Oxygen produced form the electrolysis process is used to control the oxidation rate in the oxygen-fed biomass gasifier. Based on the gasifier temperature, 94% to 95% of the carbon in the biomass becomes carbon monoxide in the syngas (carbon monoxide and hydrogen). Assuming the thermal efficiency of the power cycle for electricity generation is 50%, (as expected from GEN IV nuclear reactors), the syngas production efficiency ranges from 70% to 73% as the gasifier temperature decreases from 1900 K to 1500 K. Parametric studies of system pressure, biomass moisture content and low temperature alkaline electrolysis are also presented.

  8. Sintering activation of 316L powder using a liquid phase forming powder

    Directory of Open Access Journals (Sweden)

    Nattaya Tosangthum

    2010-03-01

    Full Text Available It was found that the addition of a liquid forming powder (up to 6 wt.% of a gas-atomized tin powder to 316L powdercould activate the sintering process. Sintering activation could be observed by an increase of the sintered density and selected mechanical properties. When optimized tin powder content was used, shorter sintering time and lower sintering temperaturecould produce sintered 316L+tin materials with excellent mechanical properties. Electron dispersive spectroscopy analyses across 316L-tin-316L grains indicated that Ni transportation during the sintering process was enhanced by the presence of liquid tin.

  9. Spatial ordering and abnormal optical activity of DNA liquid-crystalline dispersion particles

    Directory of Open Access Journals (Sweden)

    Semenov S.V.

    2017-01-01

    Full Text Available In our work, we investigate physicochemical and optical properties of double-strand DNA dispersions. The study of these properties is of biological interest, because it allows one to describe the characteristics of certain classes of chromosomes and DNA containing viruses. The package pattern of DNA molecules in the dispersions particles (DP is examined. The consideration of the DNA liquid-crystalline DP optical activity based on the theory of electromagnetic wave absorption by large molecular aggregates has been performed. The investigation is also focused on various effects induced by the interaction between biological active compounds and DNA in the content of liquid-crystalline DP.

  10. Highly pressurized partially miscible liquid-liquid flow in a micro-T-junction. II. Theoretical justifications and modeling

    Science.gov (United States)

    Qin, Ning; Wen, John Z.; Ren, Carolyn L.

    2017-04-01

    This is the second part of a two-part study on a partially miscible liquid-liquid flow (carbon dioxide and deionized water) that is highly pressurized and confined in a microfluidic T-junction. In the first part of this study, we reported experimental observations of the development of flow regimes under various flow conditions and the quantitative characteristics of the drop flow including the drop length, after-generation drop speed, and periodic spacing development between an emerging drop and the newly produced one. Here in part II we provide theoretical justifications to our quantitative studies on the drop flow by considering (1) C O2 hydration at the interface with water, (2) the diffusion-controlled dissolution of C O2 molecules in water, and (3) the diffusion distance of the dissolved C O2 molecules. Our analyses show that (1) the C O2 hydration at the interface is overall negligible, (2) a saturation scenario of the dissolved C O2 molecules in the vicinity of the interface will not be reached within the contact time between the two fluids, and (3) molecular diffusion does play a role in transferring the dissolved molecules, but the diffusion distance is very limited compared with the channel geometry. In addition, mathematical models for the drop length and the drop spacing are developed based on the observations in part I, and their predictions are compared to our experimental results.

  11. Oxidative desulfurization of model diesel via dual activation by a protic ionic liquid.

    Science.gov (United States)

    Lü, Hongying; Wang, Shunan; Deng, Changliang; Ren, Wanzhong; Guo, Baocun

    2014-08-30

    A novel and green carboxylate-anion-based protic ionic liquid (PIL), [Hnmp]HCOO, was prepared through a simple and atom economic neutralization reaction between N-methyl-2-pyrrolidonium (NMP) and formic acids. Both FT-IR spectra and (1)H NMR confirmed its simple salt structure. [Hnmp]HCOO exhibited so high catalytic activity that the dibenzothiophene (DBT) removal reached 99% at 50°C in 3h under conditions of VPIL/Vmodel oil=1:10 and H2O2/DBT (O/S, molar ratio)=5. The catalytic oxidation reactivity of S-compounds was found to be in the order of DBT>4,6-dimethyldibenzothiophene (4,6-DMDBT)>benzothiophene (BT). The investigation on mechanism showed that oxidative desulfurization was realized through dual activation of PIL. Moreover, [Hnmp]HCOO can be recycled for five times with an unnoticeable decrease in desulfurization activity. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. Development of a high performance liquid chromatography method ...

    African Journals Online (AJOL)

    Recovery accuracy was 99.77 - 101.10, 100.50 - 101.95 and 99.20 - 100.13 % for TH, GF and DH, respectively; precision (RSD) was < 2.0. Conclusion: The proposed method is highly selective, sensitive, precise, and accurate, and would suitable for the simultaneous analysis of TH, GF, and DH in elixir dosage form.

  13. Physical processes in high field insulating liquid conduction

    Science.gov (United States)

    Mazarakis, Michael; Kiefer, Mark; Leckbee, Joshua; Anderson, Delmar; Wilkins, Frank; Obregon, Robert

    2017-10-01

    In the power grid transmission where a large amount of energy is transmitted to long distances, High Voltage DC (HVDC) transmission of up to 1MV becomes more attractive since is more efficient than the counterpart AC. However, two of the most difficult problems to solve are the cable connections to the high voltage power sources and their insulation from the ground. The insulating systems are usually composed of transformer oil and solid insulators. The oil behavior under HVDC is similar to that of a weak electrolyte. Its behavior under HVDC is dominated more by conductivity than dielectric constant. Space charge effects in the oil bulk near high voltage electrodes and impeded plastic insulators affect the voltage oil hold-off. We have constructed an experimental facility where we study the oil and plastic insulator behavior in an actual HVDC System. Experimental results will be presented and compared with the present understanding of the physics governing the oil behavior under very high electrical stresses. Sandia National Laboratories managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International, Inc., for the U.S. D.O.E., NNSA under contract DE-NA-0003525.

  14. DEVELOPMENT OF A HIGH TEMPERATURE LIQUID METAL SOLUTION CALORIMETER.

    Science.gov (United States)

    alloys and many inorganic compounds, including such materials as steels, refractory metal alloys, carbides, borides , and silicides. Because of the high...alumina is used for other parts. Heat is supplied through molybdenum wire resistance windings and controlled by a proportioning controller. Temperatures

  15. Solid-Phase Extraction Combined with High Performance Liquid ...

    African Journals Online (AJOL)

    be helpful in analyzing estrogens in biological, environmental and food samples. Keywords: Solid-phase extraction, Milk, Estrogens, High ... systems are completely different from the traditional ones. Duo to the result of modern ... Therefore, to ensure the food safety and human health, it is essential to develop rapid, simple,.

  16. [Ultra-high performance liquid chromatography-mass spectrometry for analysis of newborn and fetal bovine serum components].

    Science.gov (United States)

    Li, Caixia; Wang, Fuke; Liu, Liu

    2014-05-01

    We used ultra-high performance liquid chromatography-mass spectrometry (UPLC/MS) for analyzing and identifying the active components of newborn calf serum (NCS) and fetal bovine serum (FBS). The results demonstrated significant differences in the components between NCS and FBS. FBS appeared to have more complex components than NCS, with mass to ratios (m/z) of the substances of 498, 273 and 448. These substances in FBS may be the main active components to support the proliferation and differentiation of cells.

  17. The use of pulsed high-speed liquid jet for putting out gas blow-out

    Directory of Open Access Journals (Sweden)

    A Semko

    2016-10-01

    Full Text Available The experimental analysis of putting out a gas blow-out with the help of pulse liquid flow with high velocity, which generates by powder pulse water-cannon are carried out. The flow velocity resides in range from 300 to 600 m/s in experiments depends on charge energy. Velocity of the flow head right near the gas flame determined with the help of laser contactless measuring instrument of velocity. Photography of flow was carried out. According to the preliminary test results the hydrodynamic parameters of powder pulse water-cannon for obtaining liquid flow with depend velocity are calculated. It is shown, that around the liquid flow of high velocity in air produced fine water spray with high velocity in large cross section area that effective knock down the gas blow-out at the distance 5-20 m from installation.

  18. A Straightforward Method for Glucosinolate Extraction and Analysis with High-pressure Liquid Chromatography (HPLC).

    Science.gov (United States)

    Grosser, Katharina; van Dam, Nicole M

    2017-03-15

    Glucosinolates are a well-studied and highly diverse class of natural plant compounds. They play important roles in plant resistance, rapeseed oil quality, food flavoring, and human health. The biological activity of glucosinolates is released upon tissue damage, when they are mixed with the enzyme myrosinase. This results in the formation of pungent and toxic breakdown products, such as isothiocyanates and nitriles. Currently, more than 130 structurally different glucosinolates have been identified. The chemical structure of the glucosinolate is an important determinant of the product that is formed, which in turn determines its biological activity. The latter may range from detrimental (e.g., progoitrin) to beneficial (e.g., glucoraphanin). Each glucosinolate-containing plant species has its own specific glucosinolate profile. For this reason, it is important to correctly identify and reliably quantify the different glucosinolates present in brassicaceous leaf, seed, and root crops or, for ecological studies, in their wild relatives. Here, we present a well-validated, targeted, and robust method to analyze glucosinolate profiles in a wide range of plant species and plant organs. Intact glucosinolates are extracted from ground plant materials with a methanol-water mixture at high temperatures to disable myrosinase activity. Thereafter, the resulting extract is brought onto an ion-exchange column for purification. After sulfatase treatment, the desulfoglucosinolates are eluted with water and the eluate is freeze-dried. The residue is taken up in an exact volume of water, which is analyzed by high-pressure liquid chromatography (HPLC) with a photodiode array (PDA) or ultraviolet (UV) detector. Detection and quantification are achieved by conducting comparisons of the retention times and UV spectra of commercial reference standards. The concentrations are calculated based on a sinigrin reference curve and well-established response factors. The advantages and

  19. High-performance liquid chromatography with photodiode array detection (HPLC-DAD)/HPLC-mass spectrometry (MS) profiling of anthocyanins from Andean Mashua Tubers (Tropaeolum tuberosum Ruíz and Pavón) and their contribution to the overall antioxidant activity.

    Science.gov (United States)

    Chirinos, Rosana; Campos, David; Betalleluz, Indira; Giusti, M Monica; Schwartz, Steven J; Tian, Qingguo; Pedreschi, Romina; Larondelle, Yvan

    2006-09-20

    Mashua (Tropaeolum tuberosum Ruíz and Pavón), an Andean tuber with high antioxidant activity, has sparked interest because of its traditional medicinal use. In this study, we evaluated the anthocyanin composition for three purple mashua genotypes and their contribution to the overall antioxidant activity of the tuber. Mashua anthocyanins, total phenolics, and 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) antioxidant activity ranged from 45.5 to 131.9 mg of cyanidin 3-glucoside equivalents/100 g fresh weight (FW), 174.9 to 275.5 mg of gallic acid equivalents/100 g of FW, and 16.2 to 45.7 micromol of Trolox equivalents/g of FW, respectively. The high-performance liquid chromatography with photodiode array detection (HPLC-DAD) and HPLC-electrospray ionization tandem mass spectrometry (ESI/MS-MS) profiles revealed the presence of 11 different anthocyanins. The two major pigments (56.4-73.0% total area range at 520 nm) were identified as delphinidin 3-glucoside-5-acetylrhamnoside and delphinidin 3-sophoroside-5-acetylrhamnoside. Other pigments were delphinidin 3-glucoside-5-rhamnoside, delphinidin 3-sophoroside-5-rhamnoside, delphinidin 3-glucoside, cyanidin 3-sophoroside, and cyanidin 3-sophoroside-5-rhamnoside. Cyanidin 3-glucoside and cyanidin 3-rutinoside were only found in two genotypes, while pelargonidin 3-sophoroside and pelargonidin 3-sophoroside-5-rhamnoside were only found in the third one. Anthocyanins from mashua were the major contributors to the total ABTS values for only one of the three genotypes, suggesting that other phenolics present are playing a major role in the antioxidant power of mashua tubers. Results from this study provide important information for the Nutraceutical and Functional Food Market for the use of mashua anthocyanins not only as a source of natural colorants but also as a source of phytonutrients.

  20. Fabrication of thin TEM sample of ionic liquid for high-resolution ELNES measurements.

    Science.gov (United States)

    Miyata, Tomohiro; Mizoguchi, Teruyasu

    2017-07-01

    Investigation of the local structure, ionic and molecular behavior, and chemical reactions at high spatial resolutions in liquids has become increasingly important. Improvements in these areas help to develop efficient batteries and improve organic syntheses. Transmission electron microscopy (TEM) and scanning-TEM (STEM) have excellent spatial resolution, and the electron energy-loss near edge structure (ELNES) measured by the accompanied electron energy-loss spectroscopy (EELS) is effective to analyze the liquid local structure owing to reflecting the electronic density of states. In this study, we fabricate a liquid-layer-only sample with thickness of single to tens nanometers using an ionic liquid. Because the liquid film has a thickness much less than the inelastic mean free path (IMFP) of the electron beam, the fine structure of the C-K edge electron energy loss near edge structure (ELNES) can be measured with sufficient resolution to allow meaningful analysis. The ELNES spectrum from the thin liquid film has been interpreted using first principles ELNES calculations. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Design and Comparative Analysis of a Retrofitted Liquid Cooling System for High-Power Actuators

    Directory of Open Access Journals (Sweden)

    Nicholas Paine

    2015-08-01

    Full Text Available This paper presents an in-depth system-level experimental analysis comparing air-cooled and liquid-cooled commercial off-the-shelf (COTS electric motors. Typically, liquid-cooled electric motors are reserved for large, expensive, high-end applications where the design of the motor’s electromagnetic components are closely coupled to its cooling system. By applying liquid cooling to a pre-existing motor design, this work helps bring the performance advantages of liquid cooling to smaller scale and lower cost applications. Prior work in this area gives little insight to designers of such systems. Conversely, this work aims to improve the understanding of liquid-cooled COTS motors by reporting empirically-observed factors of improvement for motor current, torque, output power and system efficiency. These measurements are obtained using a new liquid-cooled motor housing design that improves the ease of maintenance and component reuse compared to existing work. It is confirmed that datasheet motor thermal properties may serve as a reasonable guide for anticipating continuous torque performance, but may over-specify continuous power output. For the motor used in this test, continuous torque output is increased by a factor of 2.58, matching to within 9% of expected datasheet values. Continuous power output is increased by a factor of two with only 2.2% reduced efficiency compared to air-cooling.

  2. Pulsed laser kinetic studies of liquids under high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Eyring, E.M.

    1992-09-22

    A laser flash photolysis kinetic study of 2,2{prime}-bipyridine bidentate chelating ligands with one claw in the first coordination sphere of a molybdenum carbonyl complex has been completed at pressures up to 150 MPa. The reaction mechanism for thermal ring closure is found from activation volumes to change from associative interchange to dissociative interchange as substituents on the 2,2{prime}-bipyridine ligands become bulkier. In a similar study of more rigid, substituted phenanthroline bidentate ligands it was found that substituent bulkiness had little effect on the thermal ring closure mechanism. Stability constants for lithium ion complexes with crown ethers in a room temperature molten salt, fluorescence quantum yields for cresyl violet and several other dyes in solution, and the oxidation of alcohols by OsO{sub 4} have also been investigated.

  3. Shape-selective catalysis for synthesis of high-value chemicals from aromatics in coal liquids

    Energy Technology Data Exchange (ETDEWEB)

    Song, Chunshan; Schobert, H.H. [Pennsylvania State Univ., University Park, PA (United States)

    1996-12-31

    Liquids derived from coals contain numerous aromatic compounds. Many of the one- to four-ring aromatic and polar compounds can be converted into valuable chemicals. Economic analysis of the viability of liquefaction (and related conversion processes) may well produce a different result if some of the aromatics and phenolics are used for making high-value chemicals and some of the liquids for making high-quality fuels such as thermally stable aviation fuels. To make effective use of aromatics in coal liquids, we are studying shape-selective catalytic conversion of multi-ring compounds. The products of such reactions are intermediates for making value-added chemicals, monomers of advanced polymer materials, or components of advanced jet fuels. Two broad strategic approaches can be used for making chemicals and materials from coals. The first is the indirect approach: conversion of coals to liquids, followed by transformation of compounds in the liquids into value-added products. The second is direct conversion of coals to materials and chemicals. Both approaches are being explored in this laboratory. In this paper, we will give an account of our recent work on (1) shape-selective catalysis which demonstrates that high-value chemicals can be obtained from aromatic compounds by catalytic conversion over certain zeolites; and (2) catalytic graphitization of anthracites, which reveals that using some metal compounds promotes graphitization at lower temperatures and may lead to a more efficient process for making graphites from coals.

  4. Mutagenic activity of phthalate esters in bacterial liquid suspension assays.

    OpenAIRE

    Seed, J L

    1982-01-01

    The mutagenic activities of several phthalate esters have been evaluated in an 8-azaguanine resistance assay in Salmonella typhimurium. Three phthalate esters were found to be mutagenic: dimethyl phthalate, diethyl phthalate and di-n-butyl phthalate. A number of other phthalate esters were not found to be mutagenic, including di(2-ethylhexyl) phthalate, di-n-octyl phthalate, diallyl phthalate, diisobutyl phthalate and diisodecyl phthalate. A metabolite of di(2-ethylhexyl) phthalate, 2-ethylhe...

  5. A HIGH FIELD PULSED SOLENOID MAGNET FOR LIQUID METAL TARGET STUDIES.

    Energy Technology Data Exchange (ETDEWEB)

    KIRK,H.G.IAROCCI,M.SCADUTO,J.WEGGEL,R.J.MULHOLLAND,G.MCDONALD,K.T.

    2003-05-12

    The target system for a muon collider/neutrino factory requires the conjunction of an intense proton beam, a high-Z liquid target and a high-field solenoid magnet. We describe here the design parameters for a pulsed solenoid, including the magnet cryogenic system and power supply, that can generate transient fields of greater than 10T with a flat-tops on the order of 1 second. It is envisioned to locate this device at the Brookhaven AGS for proof-of-principle testing of a liquid-jet target system with pulses of le13 protons.

  6. High shear rate rheometry of low-viscosity liquids

    Science.gov (United States)

    Lodge, Arthur S.

    1987-11-01

    A new instrument called LODGE STRESSMETER was developed to measure the shear elasticity and viscosity of general and multigrade oils at high shear rates. This will make possible the measurements of normal stress difference N1 for values of shear rate up to 5 x 10 to the 5th power is temperature of 150 C. New surprising data show (as yet unexplained) the the N1 contribution to the minimum oil film thickness could be as much as 75 percent of the contribution from viscosity. This raises hope for the use of oils with lower viscosity, leading to improved fuel economy and an increase in the range of motorized vehicles.

  7. Determination of the Thermodegradation of deoxyArbutin in Aqueous Solution by High Performance Liquid Chromatography

    Directory of Open Access Journals (Sweden)

    Chih-Chien Lin

    2010-10-01

    Full Text Available Tyrosinase is the key and rate-limiting enzyme responsible for the conversion of tyrosine into melanin. Competitive inhibition of tyrosinase enzymatic activity results in decreased or absent melanin synthesis by melanocytes in human skin. DeoxyArbutin (4-[(tetrahydro-2H-pyran-2-yloxy]phenol, a novel skin whitening agent, was synthesized through the removal of hydroxyl groups from the glucose side-chain of arbutin. DeoxyArbutin not only shows greater inhibition of tyrosinase activity but is also safer than hydroquinone and arbutin. Hence, deoxyArbutin is a potential skin whitening agent for cosmetics and depigmenting drugs; however, stability of this compound under some conditions remains a problem. The lack of stability poses developmental and practical difficulties for the use of deoxyArbutin in cosmetics and medicines. Improving the thermostability of deoxyArbutin is an important issue for its development. In this research, we established an analytical procedure to verify the amount of deoxyArbutin in solutions using a high performance liquid chromatographic (HPLC method. The results indicate that this novel skin whitening agent is a thermolabile compound in aqueous solutions. Additionally, the rate constant for thermodegradation (k and the half-life (t1/2 of deoxyArbutin were determined and can be used to understand the thermodegradation kinetics of deoxyArbutin. This information can aid in the application of deoxyArbutin for many future uses.

  8. Determination of the Thermodegradation of deoxyArbutin in Aqueous Solution by High Performance Liquid Chromatography

    Science.gov (United States)

    Yang, Chao-Hsun; Chen, Yi-Shyan; Lai, Jeng-Shiow; Hong, Willy W. L.; Lin, Chih-Chien

    2010-01-01

    Tyrosinase is the key and rate-limiting enzyme responsible for the conversion of tyrosine into melanin. Competitive inhibition of tyrosinase enzymatic activity results in decreased or absent melanin synthesis by melanocytes in human skin. DeoxyArbutin (4-[(tetrahydro-2H-pyran-2-yl)oxy]phenol), a novel skin whitening agent, was synthesized through the removal of hydroxyl groups from the glucose side-chain of arbutin. DeoxyArbutin not only shows greater inhibition of tyrosinase activity but is also safer than hydroquinone and arbutin. Hence, deoxyArbutin is a potential skin whitening agent for cosmetics and depigmenting drugs; however, stability of this compound under some conditions remains a problem. The lack of stability poses developmental and practical difficulties for the use of deoxyArbutin in cosmetics and medicines. Improving the thermostability of deoxyArbutin is an important issue for its development. In this research, we established an analytical procedure to verify the amount of deoxyArbutin in solutions using a high performance liquid chromatographic (HPLC) method. The results indicate that this novel skin whitening agent is a thermolabile compound in aqueous solutions. Additionally, the rate constant for thermodegradation (k) and the half-life (t1/2) of deoxyArbutin were determined and can be used to understand the thermodegradation kinetics of deoxyArbutin. This information can aid in the application of deoxyArbutin for many future uses. PMID:21152314

  9. Determination of erythromycins in fermentation broth using liquid phase extraction with back extraction combined with high performance liquid chromatography

    Directory of Open Access Journals (Sweden)

    Fahimeh Kamarei

    2014-07-01

    Full Text Available Liquid phase extraction with back extraction (LPE-BE combined with high performance liquid chromatography-diode array detection (HPLC-DAD was applied for the extraction and determination of erythromycin A, B and C in fermentation broths. According to this procedure, the fermentation broth with the adjustment pH at a fixed value of 10 was first mixed with organic solvent (Vbroth/Vorg = 1.0. After shaking, the mixture was separated into two phases by microfuging at 13,000 rpm for 15 min. Then back extraction was performed into the acidic aqueous phase with pH 5.0 (Vorg/Vaq = 1.0. After centrifugation at 3000, the two phases were separated and 50 μL of the acidic aqueous phase was injected into the HPLC. The effects of different variables such as the nature of extraction solvent and the pH of samples and buffer were investigated. At the most appropriate conditions, dynamic linear ranges of 0.5–8, 0.1–0.9 and 0.1–0.9 mg mL−1 and limits of detection of 0.03, 0.003 and 0.002 mg mL−1 were obtained for erythromycin A, B and C, respectively. Relative standard deviations (RSDs of the proposed method were less than 9.5%. The mean recoveries were 99.5%. The proposed method is simple and sensitive with highly clean-up effect and it can be used for monitoring the progress of erythromycin fermentation.

  10. Determination of palbociclib by high performance liquid chromatography

    Directory of Open Access Journals (Sweden)

    Xiaodong SHI

    2017-08-01

    Full Text Available In order to establish an HPLC method for the content determination of palbociclib, HPLC is performed on the column of Agilent C18 (250 mm × 4.6 mm,5 μm)with the mobile phase of acetonitrile-water (300∶700,0.1% TFA included at the flow rate of 1.0 mL/min, with the sample size of 10 μL, the detection wavelength of 234 nm and the column temperature of 40 ℃. The result shows that the main drug and the related substances could be well separated; the calibration curve of palbociclib is in good linearity over the range of 50~150 μg/mL, and r=0.999 5; the RSD of instrument precision, intermediate precision and stability test of related substances and content are no more than 2.0%; the average recovery is 100.0% with RSD of 0.8% (n=9. The method can rapidly and accurately determine the PD content, effectively eliminate the effects of other external factors. It provides a new reference to the content determination of active pharmaceutical ingredients.

  11. High luminosity liquid-argon calorimeter test beam

    Energy Technology Data Exchange (ETDEWEB)

    Novgorodova, Olga; Straessner, Arno [TU Dresden, IKTP (Germany)

    2016-07-01

    In the future HL-LHC the luminosity will increase by factor of 5-7 with respect to the original LHC design. The HiLum collaboration studied the impact on small-sized modules of the ATLAS electromagnetic, hadronic, and forward calorimeters also instrumented by various intensity and position detectors. The intensity of beam varied over a wide range (10{sup 6} to 10{sup 12} p/s) and beyond the maximum expected at HL-LHC for these calorimeters. Results from the last test beam campaign in 2013 on the signal shape analysis from the calorimeter modules are compared with MC simulations. The correlation between high-voltage return currents of the electromagnetic calorimeter and beam intensity is used to estimate critical parameters and compared with predictions.

  12. Critical mingling and universal correlations in model binary active liquids

    Science.gov (United States)

    Bain, Nicolas; Bartolo, Denis

    2017-06-01

    Ensembles of driven or motile bodies moving along opposite directions are generically reported to self-organize into strongly anisotropic lanes. Here, building on a minimal model of self-propelled bodies targeting opposite directions, we first evidence a critical phase transition between a mingled state and a phase-separated lane state specific to active particles. We then demonstrate that the mingled state displays algebraic structural correlations also found in driven binary mixtures. Finally, constructing a hydrodynamic theory, we single out the physical mechanisms responsible for these universal long-range correlations typical of ensembles of oppositely moving bodies.

  13. Design and implementation of an automated liquid-phase microextraction-chip system coupled on-line with high performance liquid chromatography

    DEFF Research Database (Denmark)

    Li, Bin; Petersen, Nickolaj J.; Payán, María D Ramos

    2014-01-01

    An automated liquid-phase microextraction (LPME) device in a chip format has been developed and coupled directly to high performance liquid chromatography (HPLC). A 10-port 2-position switching valve was used to hyphenate the LPME-chip with the HPLC autosampler, and to collect the extracted....... The composition of the supported liquid membrane (SLM) and carrier was optimized in order to achieve reasonable extraction performance of all the five alkaloids. With 1-octanol as SLM solvent and with 25mM sodium octanoate as anionic carrier, extraction recoveries for the different opium alkaloids ranged between....... The repeatability was within 5.0-10.8% (RSD). The membrane liquid in the LPME-chip was regenerated automatically between every third injection. With this procedure the liquid membrane in the LPME-chip was stable in 3-7 days depending on the complexity of sample solutions with continuous operation. With this LPME...

  14. An evaporation-assisted dispersive liquid-liquid microextraction technique as a simple tool for high performance liquid chromatography tandem-mass spectrometry determination of insecticides in wine.

    Science.gov (United States)

    Timofeeva, Irina; Kanashina, Daria; Moskvin, Leonid; Bulatov, Andrey

    2017-08-25

    A sample pre-treatment technique based on evaporation-assisted dispersive liquid-liquid microextraction (EVA-DLLME), followed by HPLC-MS/MS has been developed for the determination of organophosphate insecticides (malathion, diazinon, phosalone) in wine samples. The procedure includes the addition of mixture of organic solvents (with density higher than water), consisting of the extraction (low density) and volatile (high density) solvents, to aqueous sample followed by heating of the mixture obtained, what promotes the volatile solvent evaporation and moving extraction solvent droplets from down to top of the aqueous sample and, as a consequence, microextraction of target analytes. To initiate the evaporation process an initiator is required. It was established that hexanol (extraction solvent) and dichloromethane (volatile solvent) mixture (1:1, v/v) provides effective microextraction of the insecticides from wine samples with recovery from 92 to 103%. The conditions of insecticides' microextraction such as selection of extraction solvent, ratio of hexanol/dichloromethane and hexanol/sample, type and concentration of initiator, and effect of ethanol as one of the main components of wine have been studied. Under optimal experimental conditions the linear detection ranges were found to be 10(-7)-10(-3)gL(-1) for malathion, 10(-9)-10(-4)gL(-1) for diazinon, and 10(-6)-10(-2)gL(-1) for phosalone. The LODs, calculated from a blank test, based on 3σ, found to be 3×10(-8)gL(-1) for malathion, 3×10(-10)gL(-1) for diazinon and 3×10(-7)gL(-1) for phosalone. The advantages of EVA-DLLME are the rapidity, simplicity, high sample throughput and low cost. As an outcome, the analytical results agreed fairly well with the results obtained by a reference GC-MS method. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. The A Priori Design and Selection of Ionic Liquids as Solvents for Active Pharmaceutical Ingredients

    DEFF Research Database (Denmark)

    Kunov-Kruse, Andreas Jonas; Weber, Cameron C.; Rogers, Robin D.

    2017-01-01

    In this paper we derive a straightforward computational approach to predict the optimal ionic liquid (IL) solvent for a given compound, based on COSMO-RS calculations. These calculations were performed on 18 different active pharmaceutical ingredients (APIs) using a matrix of 210 hypothetical ILs...

  16. Impact of sludge properties on solid-liquid separation of activated sludge

    DEFF Research Database (Denmark)

    Christensen, Morten Lykkegaard

    2016-01-01

    Solid-liquid separation of activated sludge is important both directly after the biological treatment of wastewater and for sludge dewatering. The separation of solid from the treated wastewater can be done by clarifiers (conventional plants) or membrane (MBR). Further, part of the sludge is taken...

  17. Pharmaceutically active ionic liquids with solids handling, enhanced thermal stability, and fast release

    DEFF Research Database (Denmark)

    Bica, Katharina; Rodríguez, Héctor; Gurau, Gabriela

    2012-01-01

    Pharmaceutically active compounds in ionic liquid form immobilized onto mesoporous silica are stable, easily handled solids, with fast and complete release from the carrier material when placed into an aqueous environment. Depending on specific ion-surface interactions, they may also exhibit...

  18. Electrografting of stimuli-responsive, redox active organometallic polymers to gold from ionic liquids

    NARCIS (Netherlands)

    Feng, Xueling; Sui, Xiaofeng; Hempenius, Mark A.; Vancso, Gyula J.

    2014-01-01

    Robust, dense, redox active organometallic poly(ferrocenylsilane) (PFS) grafted films were formed within 5 min by cathodic reduction of Au substrates, immersed in a solution of imidazolium–functionalized PFS chains in the ionic liquid 1-ethyl-3-methylimidazolium ethyl sulfate. The electrografted

  19. Quantitative analysis of mitragynine in human urine by high performance liquid chromatography-tandem mass spectrometry.

    Science.gov (United States)

    Lu, Shijun; Tran, Buu N; Nelsen, Jamie L; Aldous, Kenneth M

    2009-08-15

    Mitragynine is the primary active alkaloid extracted from the leaves of Mitragyna speciosa Korth, a plant that originates in South-East Asia and is commonly known as kratom in Thailand. Kratom has been used for many centuries for their medicinal and psychoactive qualities, which are comparable to that of opiate-based drugs. Kratom abuse can lead to a detectable content of mitragynine residue in urine. Ultra trace amount of mitragynine in human urine was determined by a high performance liquid chromatography coupled to an electrospray tandem mass spectrometry (HPLC-ESI/MS/MS). Mitragynine was extracted by methyl t-butyl ether (MTBE) and separated on a HILIC column. The ESI/MS/MS was accomplished using a triple quadrupole mass spectrometer in positive ion detection and multiple reactions monitoring (MRM) mode. Ajmalicine, a mitragynine's structure analog was selected as internal standard (IS) for method development. Quality control (QC) performed at three levels 0.1, 1 and 5 ng/ml of mitragynine in urine gave mean recoveries of 90, 109, and 98% with average relative standard deviation of 22, 12 and 16%, respectively. The regression linearity of mitragynine calibration ranged from 0.01 to 5.0 ng/ml was achieved with correlation coefficient greater than 0.995. A detection limit of 0.02 ng/ml and high precision data within-day and between days analysis were obtained.

  20. Ionic liquid-assisted photochemical synthesis of ZnO/Ag2O heterostructures with enhanced visible light photocatalytic activity

    Science.gov (United States)

    Zhao, Shuo; Zhang, Yiwei; Zhou, Yuming; Zhang, Chao; Fang, Jiasheng; Sheng, Xiaoli

    2017-07-01

    ZnO/Ag2O heterostructures have been successfully fabricated using ionic liquids (ILs) as templates by a simple photochemical route. The influence of the type of ionic liquid and synthetic method on the morphology of ZnO, as well as the photocatalytic activity for the degradation of Rhodamine B (RhB), tetracycline (TC) and ciprofloxacin (CIP) under ultraviolet and visible light irradiation was studied. The samples were characterized by XRD, SEM, TEM, PL and UV-vis DRS. The results established that the type of ionic liquid and synthetic method played an important role in the growth of ZnO nanoparticles. And as-fabricated ZnO/Ag2O materials exhibited self-assembled flower-like architecture whose size was about 3 μm. Moreover, as-prepared ZnO/Ag2O exhibited the enhanced photocatalytic activity than ZnO sample, which may be due to the special structure, heterojunction, enhanced adsorption capability of dye, the improved separation rate of photogenerated electron-hole pairs. According to the results of radical trapping experiments, it can be found that •OH and h+ were the main active species for the photocatalytic degradation of RhB. It is valuable to develop this facile route preparing the highly dispersive flower-like ZnO/Ag2O materials, which can be beneficial for environmental protection.

  1. Liquid scintillator composition optimization for use in ultra-high energy cosmic ray detector systems

    Directory of Open Access Journals (Sweden)

    Beznosko Dmitriy

    2017-01-01

    Full Text Available The Horizon-T (HT detector system and the currently under R&D HT-KZ detector system are designed for the detection of Extensive Air Showers (EAS with energies above ∼1016 eV (∼1017 eV for HT-KZ. The main challenges in both detector systems are the fast time resolutions needed for studying the temporary structure of EAS, and the extremely wide dynamic range needed to study the spatial distribution of charged particles in EAS disks. In order to detect the low-density of charged particles far from the EAS axis, a large-area detector is needed. Liquid scintillator with low cost would be a possible solution for such a detector, including the recently developed safe and low-cost water-based liquid scintillators. Liquid organic scintillators give a fast and high light yield (LY for charged particle detection. It is similar to plastic scintillator in properties but is cost effective for large volumes. With liquid scintillator, one can create detection volumes that are symmetric and yet retain high LY detection. Different wavelength shifters affect the scintillation light by changing the output spectrum into the best detection region. Results of the latest studies of the components optimization in the liquid scintillator formulae are presented.

  2. Pumping liquid metal at high temperatures up to 1,673 kelvin

    Science.gov (United States)

    Amy, C.; Budenstein, D.; Bagepalli, M.; England, D.; Deangelis, F.; Wilk, G.; Jarrett, C.; Kelsall, C.; Hirschey, J.; Wen, H.; Chavan, A.; Gilleland, B.; Yuan, C.; Chueh, W. C.; Sandhage, K. H.; Kawajiri, Y.; Henry, A.

    2017-10-01

    Heat is fundamental to power generation and many industrial processes, and is most useful at high temperatures because it can be converted more efficiently to other types of energy. However, efficient transportation, storage and conversion of heat at extreme temperatures (more than about 1,300 kelvin) is impractical for many applications. Liquid metals can be very effective media for transferring heat at high temperatures, but liquid-metal pumping has been limited by the corrosion of metal infrastructures. Here we demonstrate a ceramic, mechanical pump that can be used to continuously circulate liquid tin at temperatures of around 1,473-1,673 kelvin. Our approach to liquid-metal pumping is enabled by the use of ceramics for the mechanical and sealing components, but owing to the brittle nature of ceramics their use requires careful engineering. Our set-up enables effective heat transfer using a liquid at previously unattainable temperatures, and could be used for thermal storage and transport, electric power production, and chemical or materials processing.

  3. Liquid scintillator composition optimization for use in ultra-high energy cosmic ray detector systems

    Science.gov (United States)

    Beznosko, Dmitriy; Batyrkhanov, Ayan; Iakovlev, Alexander; Yelshibekov, Khalykbek

    2017-06-01

    The Horizon-T (HT) detector system and the currently under R&D HT-KZ detector system are designed for the detection of Extensive Air Showers (EAS) with energies above ˜1016 eV (˜1017 eV for HT-KZ). The main challenges in both detector systems are the fast time resolutions needed for studying the temporary structure of EAS, and the extremely wide dynamic range needed to study the spatial distribution of charged particles in EAS disks. In order to detect the low-density of charged particles far from the EAS axis, a large-area detector is needed. Liquid scintillator with low cost would be a possible solution for such a detector, including the recently developed safe and low-cost water-based liquid scintillators. Liquid organic scintillators give a fast and high light yield (LY) for charged particle detection. It is similar to plastic scintillator in properties but is cost effective for large volumes. With liquid scintillator, one can create detection volumes that are symmetric and yet retain high LY detection. Different wavelength shifters affect the scintillation light by changing the output spectrum into the best detection region. Results of the latest studies of the components optimization in the liquid scintillator formulae are presented.

  4. Liquid Crystalline Epoxies with Lateral Substituents Showing a Low Dielectric Constant and High Thermal Conductivity

    Science.gov (United States)

    Guo, Huilong; Lu, Mangeng; Liang, Liyan; Wu, Kun; Ma, Dong; Xue, Wei

    2017-02-01

    In this work, liquid crystalline epoxies with lateral substituents were synthesized and cured with aromatic amines or anhydride. The liquid crystalline phase structure of liquid crystalline epoxies with lateral substituents was determined by polarized optical microscopy. The relationship between thermal conductivity and dielectric properties and liquid crystalline domain structure was discussed in the paper. The samples show high thermal conductivity up to 0.29 W/(m × K), due to the orientation of mesogenic units in epoxies. The sample's low dielectric constant of 2.29 is associated with the oriented mesogenic units and long nonpolar lateral substituents. This indicates a new way to obtain materials with high thermal conductivity and a low dielectric constant by introducing oriented mesogenic units into cross-linked epoxy systems. The water repellency is reflected in the contact angles of 92-98°, which are apparently higher than that of conventional epoxy systems. It was also found that the better toughness of liquid crystalline epoxies with lateral substituents was attributed to the existence of long flexible alkyl lateral substituents.

  5. High Bulk Modulus of Ionic Liquid and Effects on Performance of Hydraulic System

    Directory of Open Access Journals (Sweden)

    Milan Kambic

    2014-01-01

    Full Text Available Over recent years ionic liquids have gained in importance, causing a growing number of scientists and engineers to investigate possible applications for these liquids because of their unique physical and chemical properties. Their outstanding advantages such as nonflammable liquid within a broad liquid range, high thermal, mechanical, and chemical stabilities, low solubility for gases, attractive tribological properties (lubrication, and very low compressibility, and so forth, make them more interesting for applications in mechanical engineering, offering great potential for new innovative processes, and also as a novel hydraulic fluid. This paper focuses on the outstanding compressibility properties of ionic liquid EMIM-EtSO4, a very important physical chemically property when IL is used as a hydraulic fluid. This very low compressibility (respectively, very high Bulk modulus, compared to the classical hydraulic mineral oils or the non-flammable HFDU type of hydraulic fluids, opens up new possibilities regarding its usage within hydraulic systems with increased dynamics, respectively, systems’ dynamic responses.

  6. Coupling nanoliter high-performance liquid chromatography to inductively coupled plasma mass spectrometry for arsenic speciation.

    Science.gov (United States)

    Cheng, Heyong; Shen, Lihuan; Liu, Jinhua; Xu, Zigang; Wang, Yuanchao

    2017-12-23

    Nanoliter high-performance liquid chromatography shows low consumption of solvents and samples, offering one of the best choices for arsenic speciation in precious samples in combination with inuctively coupled plasma mass spectrometry. A systematic investigation on coupling nanoliter high-performance liquid chromatography to inductively coupled plasma mass spectrometry from instrument design to injected sample volume and mobile phase was performed in this study. Nanoflow mobile phase was delivered by flow splitting using a conventional high-pressure pump with reuse of mobile phase waste. Dead volume was minimized to 60 nL for the sheathless interface based on the previously developed nanonebulizer. Capillary columns for nanoliter high-performance liquid chromatography were found to be sensitive to sample loading volume. An apparent difference was also found between the mobile phases for nanoliter and conventional high-performance liquid chromatography. Baseline separation of arsenite, arsenate, monomethylarsenic, and dimethylarsenic was achieved within 11 min on a 15 cm C18 capillary column and within 12 min on a 25 cm strong anion exchange column. Detection limits of 0.9-1.8 μg/L were obtained with precisions variable in the range of 1.6-4.2%. A good agreement between determined and certified values of a certified reference material of human urine (GBW 09115) validated its accuracy along with good recoveries (87-102%). © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Phosphonium alkyl PEG sulfate ionic liquids as coating materials for activation of Burkholderia cepacia lipase.

    Science.gov (United States)

    Matsubara, Yui; Kadotani, Shiho; Nishihara, Takashi; Hikino, Yoshichika; Fukaya, Yukinobu; Nokami, Toshiki; Itoh, Toshiyuki

    2015-12-01

    Lipases are among the most widely used enzymes applicable for various substrates; however, the slow reactions or poor enantioselective reactions are sometimes obtained. To develop ionic liquid type activating agents for lipase, four types of phosphonium cetyl(PEG)10 sulfate ionic liquids have been synthesized and used as coating materials of Burkholderia cepacia lipase (Lipase PS) through the lyophilization process. Tributyl ([2-methoxy]ethoxymethyl)phosphonium cetyl(PEG)10 sulfate ([P444MEM ][C16 (PEG)10 SO4 ]) (PL1) worked best among them, and PL1-coated lipase PS displayed high reactivity in transesterification of broad types of secondary alcohols using vinyl acetate as an acylating reagent with perfect enantioselectivity (E > 200). The substrate preference of PL1-PS differs from that of commercial lipase PS or [bdmim] [C16 (PEG)10 SO4 ]-coated lipase (IL1-PS); PL1-PS displayed excellent enantioselectivity in the reaction of 2-chloro-1-phenylethanol with E > 200, though insufficient E values were recorded for lipase PS (E = 12) and IL1-PS (E = 123) for this alcohol. PL1-PS also showed perfect enantioselectivity (E > 200) for the reaction of 1-(pyridin-2-yl)ethanol, while IL1-PS showed E = 130 for this compound. We further succeeded in demonstrating the recyclable use of PL1-PS five times in tributyl(3-methoxypropyl)phosphonium bis(trifluoromethylsulfonyl)amide ([P444PM ][Tf2 N]) as a solvent. Since PL1-PS is easily applicable to 10-20 gram-scaled reactions, it is expected that the IL-coated enzyme might be useful for practical preparation of a wide variety of chiral secondary alcohols. Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Synthesis of Silver Nanoparticles Using Hydroxyl Functionalized Ionic Liquids and Their Antimicrobial Activity

    Directory of Open Access Journals (Sweden)

    Young Key Shim

    2008-05-01

    Full Text Available We report a new one phase method for the synthesis of uniform monodisperse crystalline Ag nanoparticles in aqueous systems that has been developed by using newly synthesized mono and dihydroxylated ionic liquids and cationic surfactants based on 1,3-disubstituted imidazolium cations and halogens anions. The hydroxyl functionalized ionic liquids (HFILs and hydroxyl functionalized cationic surfactants (HFCSs also simultaneously acts both as the reductant and protective agent. By changing the carbon chain length, alcohol structure and anion of the 1,3-imidazolium based HFILs and HFCSs the particle size, uniform and dispersibility of nanoparticles in aqueous solvents could be controlled. Transmission electron microscopy (TEM, electron diffraction, UV-Vis and NMR, were used for characterization of HFILs, HFCSs and silver nanoparticles. TEM studies on the solution showed representative spherical silver nanoparticles with average sizes 2-8 nm, particularly 2.2 nm and 4.5 nm in size range and reasonable narrow particle size distributions (SD-standard distribution 0.2 nm and 0.5 nm respectively. The all metal nanoparticles are single crystals with face centered cubic (fcc structure. The silver nanoparticles surface of plasmon resonance band (λmax around 420 nm broadened and little moved to the long wavelength region that indicating the formation of silver nanoparticles dispersion with broad absorption around infrared (IR region. Silver complexes of these HFILs as well as different silver nanoparticles dispersions have been tested in vitro against several gram positive and gram negative bacteria and fungus. The silver nanoparticles providing environmentally friendly and high antimicrobial activity agents.

  9. A high expression EGFR/cell membrane chromatography and online high performance liquid chromatography/mass spectrometry method for screening EGFR antagonists from Rhizoma Polygoni Cuspidati

    Directory of Open Access Journals (Sweden)

    Meng Sun

    2011-08-01

    Full Text Available The epidermal growth factor receptors (EGFRs in some tumor cells are significant targets for drug discovery. In this work, we have developed an EGFR cell membrane chromatography and online high performance liquid chromatography/mass spectrometry system for screening active component from Rhizoma Polygoni Cuspidati. As a result, resveratrol from Rhizoma Polygoni Cuspidati was found to be the active component acting on EGFR like gefitinib. There was a good relationship between their inhibiting effects on EGFR secretion and HEK293 EGFR cell growth in vitro. The EGFR/CMC-online-HPLC/MS system demonstrated fast and effective characteristics for screening leading compounds from traditional Chinese medicine.

  10. Analysis of tilianin and acacetin inAgastache rugosaby high-performance liquid chromatography with ionic liquids-ultrasound based extraction.

    Science.gov (United States)

    Wei, Jinfeng; Cao, Pengran; Wang, Jinmei; Kang, Wenyi

    2016-01-01

    Ionic liquid 1-butyl-3-methylimidazolium bromide-methanol-based ultrasonic-assisted extraction (ILUAE) was used to extract tilianin and acacetin from the aerial parts of Agastache rugose ( A. rugose ), and simultaneously determined by reversed phase high performance liquid chromatographic (RP-HPLC) method with ultraviolet detection (RP-HPLC-UV). An InertSustain RP-C 18 column was used with the mobile phase consisting of methanol and 0.2% acetic acid as gradient elution at the detection wavelength of 332 nm. The flow rate was 0.8 mL/min, and the column temperature was 30 °C. Under the optimized conditions, tilianin and acacetin displayed good linearity in the ranges of 0.0595-4.76 and 0.0585-4.68 μg/mL, respectively, with the average recoveries being 96.93 and 97.88%, respectively. The method of ILUAE was compared with the traditional methods, it exhibited higher efficiency, higher reproducibility and environmental friendly in analyzing the active compounds in traditional Chinese medicines (TCMs).

  11. High CO{sub 2} solubility in ionic liquids and a tetraalkylammonium-based poly(ionic liquid)

    Energy Technology Data Exchange (ETDEWEB)

    Supasitmongkol, S.; Styring, P. [University of Sheffield, Sheffield (United Kingdom)

    2010-12-15

    Carbon dioxide (CO{sub 2}) absorption in several imidazolium-based ionic liquids (ILs), pyridinium-based ionic liquids and a tetraalkylammonium-based poly(ionic liquid) (PIL), poly((p-vinylbenzyl) trimethylammonium hexafluorophosphate) P((VBTMA)(PF6)), was studied. The trend of CO{sub 2} solubility in all of the ILs increases dramatically with decreasing absorption temperature. Based on the same bis(triflamide) (Tf2N) anion, imidazolium, pyridinium and trihexyltetradecylphosphonium-based ionic liquids all show relatively similar CO{sub 2} solubilities, which were higher than for the ES anion. The highest CO{sub 2} absorption was found in a poly(ionic liquid) P((VBTMA)(PF6)); however, the monomer also showed higher CO{sub 2} capacity than the other ionic liquids. The poly(ionic liquid) is remarkable in that it can adsorb 77% of its body weight of CO{sub 2} with a selectivity over nitrogen of 70:1. The absorbed CO{sub 2} gas can be readily desorbed from ionic liquids and poly(ionic liquid) and the selectivity for CO{sub 2} over N{sub 2} was consistent over repeated cycles. The materials can be reused several times for consecutive sorption/desorption cycles, without loss of performance in a large-scale reactor and therefore represent serious candidates for use in commercial adsorbers.

  12. Development of a method for measuring the density of liquid sulfur at high pressures using the falling-sphere technique.

    Science.gov (United States)

    Funakoshi, Ken-ichi; Nozawa, Akifumi

    2012-10-01

    We describe a new method for the in situ measurement of the density of a liquid at high pressure and high temperature using the falling-sphere technique. Combining synchrotron radiation X-ray radiography with a large-volume press, the newly developed falling-sphere method enables the determination of the density of a liquid at high pressure and high temperature based on Stokes' flow law. We applied this method to liquid sulfur and successfully obtained the density at pressures up to 9 GPa. Our method could be used for the determination of the densities of other liquid materials at higher static pressures than are currently possible.

  13. Continued Advancement of Supported Liquid Membranes for Carbon Dioxide Control in Extravehicular Activity Applications

    Science.gov (United States)

    Wickham, David T.; Gleason, Kevin J.; Engel, Jeffrey R.; Cowley, Scott W.; Chullen, Cinda

    2015-01-01

    The Development of a new, robust, portable life support system (PLSS) is currently a high NASA priority in order to support longer and safer extravehicular activity (EVA) missions that will be necessary as space travel extends to near-Earth asteroids and eventually Mars. One of the critical PLSS functions is maintaining the carbon dioxide (CO2) concentration in the suit at acceptable levels. The Metal Oxide (MetOx) canister has a finite CO2 adsorption capacity and therefore in order to extend mission times, the unit would have to be larger and heavier, which is undesirable; therefore new CO2 control technologies must be developed. While recent work has centered on the use of alternating sorbent beds that can be regenerated during the EVA, this strategy increases the system complexity and power consumption. A simpler approach is to use a membrane that vents CO2 to space but retains oxygen(O2). A membrane has many advantages over current technology: it is a continuous system with no theoretical capacity limit, it requires no consumables, and it requires no hardware for switching beds between absorption and regeneration. Conventional gas separation membranes do not have adequate selectivity for use in the PLSS, but the required performance could be obtained with a supported liquid membrane (SLM), which consists of a microporous film filled with a liquid that selectively reacts with CO2 over oxygen (O2). In a recently completed Phase II Small Business Innovative Research project, Reaction Systems developed a new reactive liquid that has effectively zero vapor pressure, making it an ideal candidate for use in an SLM. Results obtained with the SLM in a flat sheet configuration with representative pressures of CO2, O2, and water (H2O) have shown that the CO2 permeation rate and CO2/O2 selectivity requirements have been met. In addition, the SLM vents moisture to space very effectively. The SLM has also been prepared and tested in a hollow fiber form, which will be

  14. Highly stable noble-metal nanoparticles in tetraalkylphosphonium ionic liquids for in situ catalysis.

    Science.gov (United States)

    Banerjee, Abhinandan; Theron, Robin; Scott, Robert W J

    2012-01-09

    Gold and palladium nanoparticles were prepared by lithium borohydride reduction of the metal salt precursors in tetraalkylphosphonium halide ionic liquids in the absence of any organic solvents or external nanoparticle stabilizers. These colloidal suspensions remained stable and showed no nanoparticle agglomeration over many months. A combination of electrostatic interactions between the coordinatively unsaturated metal nanoparticle surface and the ionic-liquid anions, bolstered by steric protection offered by the bulky alkylated phosphonium cations, is likely to be the reason behind such stabilization. The halide anion strongly absorbs to the nanoparticle surface, leading to exceptional nanoparticle stability in halide ionic liquids; other tetraalkylphosphonium ionic liquids with non-coordinating anions, such as tosylate and hexafluorophosphate, show considerably lower affinities towards the stabilization of nanoparticles. Palladium nanoparticles stabilized in the tetraalkylphosphonium halide ionic liquid were stable, efficient, and recyclable catalysts for a variety of hydrogenation reactions at ambient pressures with sustained activity. Aerial oxidation of the metal nanoparticles occurred over time and was readily reversed by re-reduction of oxidized metal salts. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Speciation analysis of mercury in sediments using vortex-assisted liquid-liquid microextraction coupled to high-performance liquid chromatography-cold vapor atomic fluorescence spectrometry.

    Science.gov (United States)

    Leng, Geng; Yin, Hui; Li, Shaobo; Chen, Yong; Dan, Dezhong

    2012-09-15

    A simple and fast solvent microextraction method termed vortex-assisted liquid-liquid microextraction (VALLME) coupled with high-performance liquid chromatography-vapor generation atomic fluorescence spectrometry (HPLC-CVAFS) has been developed for the trace analysis of methylmercury (MeHg(+)), ethylmercury (EtHg(+)) and inorganic mercury (Hg(2+)) in sediment samples. Carbon tetrachloride was used as collecting solvent for the extraction of mercury species from sediment by a vortex-assisted extraction. In VALLME, 100 μL 1% (m/v) l-Cysteine were used as extraction solvent and were injected into 4 mL carbon tetrachloride. The extraction solvent dispersed into carbon tetrachloride under vigorously shaking by a vortex agitator. The fine droplets could extract mercury species within few minutes because of the shorter diffusion distance and larger specific surface area. After centrifugation, the floating extractant phase restored its initial single microdrop shape and was used for HPLC-CVAFS analysis. The parameters affecting the extraction efficiency of the proposed VALLME such as extraction solvent, vortex time, volumes of extraction solvent and salt addition etc. were investigated. Under the optimum conditions, linearity was found in the concentration range from 0.1 to 25 ng g(-1) for MeHg(+), 0.2 to 65 ng g(-1) for EtHg(+), and 0.1 to 30 ng g(-1) for Hg(2+). Coefficients of determination (R(2)) ranged from 0.9938 to 0.9972. The limits of detection (LODs, signal-to-noise ratio (S/N)=3) were 0.028 ng g(-1) for MeHg(+), 0.057 ng g(-1) for EtHg(+), and 0.029 ng g(-1) for Hg(2+). Reproducibility and recoveries were assessed by testing a series of 6 sediment samples, which were spiked with different concentration levels. Finally, the proposed method was successfully applied in analyses of real nature sediment samples. In this work, VALLME was applied to the extraction of mercury species in sediment samples for the first time. Using l-Cys as extraction solvent, the

  16. Esterification activity and conformation studies of Burkholderia cepacia lipase in conventional organic solvents, ionic liquids and their co-solvent mixture media.

    Science.gov (United States)

    Pan, Shaotao; Liu, Xue; Xie, Yadong; Yi, Yuyin; Li, Chong; Yan, Yunjun; Liu, Yun

    2010-12-01

    In this work, experiments were carried out to evaluate the esterification activity and conformation of lipase from Burkholderia cepacia in the selected conventional organic solvents, ionic liquids and their co-solvent mixture media. The results revealed that the activity of esterification of B. cepacia lipase was mostly highest in co-solvent mixture of ionic liquids-organic solvents, followed by conventional organic solvents and ionic liquids. Hence, co-solvent mixture was a high-effective strategy to enhance the activity of B. cepacia lipase for non-aqueous enzymology reaction. Conformational studies via circular dichroism spectroscopy indicated that the secondary structure of B. cepacia lipase was variant in the above-mentioned media, especially the content of alpha-helix, which was probably responsible for lipase activity difference. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  17. Sorption of catechins under conditions of reverse-phase high-efficiency liquid chromatography

    Science.gov (United States)

    Shafigulin, R. V.; Egorova, K. V.; Bulanova, A. V.

    2010-08-01

    The physico-chemical principles of catechin sorption from various polar solvents onto silica gel modified with octadecyl groups were studied. Thermodynamic characteristics of the sorption were calculated, and the applicability of different models of retention was demonstrated for catechins under the conditions of reverse-phase high-efficiency liquid chromatography.

  18. Impact of a high-speed train of microdrops on a liquid pool

    NARCIS (Netherlands)

    Bouwhuis, W.; Huang, X; Chan, C.U.; Frommhold, P.E.; Ohl, C.D.; Lohse, Detlef; Snoeijer, Jacobus Hendrikus; van der Meer, Roger M.

    2016-01-01

    A train of high-speed microdrops impacting on a liquid pool can create a very deep and narrow cavity, reaching depths more than 1000 times the size of the individual drops. The impact of such a droplet train is studied numerically using boundary integral simulations. In these simulations, we solve

  19. New methods and materials for solid phase extraction and high performance liquid chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Dumont, Philip John [Iowa State Univ., Ames, IA (United States)

    1996-04-23

    This paper describes methods for solid phase extraction and high performance liquid chromatography (HPLC). The following are described: Effects of Resin Sulfonation on the Retention of Polar Organic Compounds in Solid Phase Extraction; Ion-Chromatographic Separation of Alkali Metals In Non-Aqueous Solvents; Cation-Exchange Chromatography in Non-Aqueous Solvents; and Silicalite As a Stationary Phase For HPLC.

  20. Silica-supported ionic liquid as highly efficient catalyst for one-pot ...

    Indian Academy of Sciences (India)

    supported ionic liquid as highly efficient catalyst for one-pot synthesis of acenaphtho[1,2-b]furan compounds. REZA SANDAROOSa,∗, MOHAMMAD TAGHI GOLDANIb,∗ and SAMAN DAMAVANDIc. aDepartment of Chemistry, Faculty of Science, ...

  1. An Advanced, Interactive, High-Performance Liquid Chromatography Simulator and Instructor Resources

    Science.gov (United States)

    Boswell, Paul G.; Stoll, Dwight R.; Carr, Peter W.; Nagel, Megan L.; Vitha, Mark F.; Mabbott, Gary A.

    2013-01-01

    High-performance liquid chromatography (HPLC) simulation software has long been recognized as an effective educational tool, yet many of the existing HPLC simulators are either too expensive, outdated, or lack many important features necessary to make them widely useful for educational purposes. Here, a free, open-source HPLC simulator is…

  2. High-Performance Liquid Chromatography in the Undergraduate Chemical Engineering Laboratory

    Science.gov (United States)

    Frey, Douglas D.; Guo, Hui; Karnik, Nikhila

    2013-01-01

    This article describes the assembly of a simple, low-cost, high-performance liquid chromatography (HPLC) system and its use in the undergraduate chemical engineering laboratory course to perform simple experiments. By interpreting the results from these experiments students are able to gain significant experience in the general method of…

  3. International school on high field NMR spectroscopy for solids and liquids

    Energy Technology Data Exchange (ETDEWEB)

    Marion, D.; Meier, B.; Keeler, J.; Berthault, P.; Vedrine, P.; Grandinetti, P.; Delsuc, M.A.; Spiess, H

    2006-07-01

    The aim of the school is to offer high-level pedagogical courses on a wide range of liquid- and solid-state NMR concepts and techniques: theory, instrumentation (magnets and probes), data acquisition, processing and analysis, measurement of dipolar and quadrupolar couplings, spin relaxation and hyper-polarization. This document gathers only the slides of most presentations.

  4. Comparison of high performance liquid chromatography and enzymatic analysis of soluble carbohydrates in loblolly pine

    Science.gov (United States)

    Patricia L. Faulkner; Michele M. Schoeneberger; Kim H. Ludovici

    1993-01-01

    Foliar tissue was collected from a field study designed to test impacts of atmospheric pollutants on loblolIy pine (Pinus taeda L.) seedlings. Standard enzymatic (ENZ) and high performance liquid chromatography (HPLC) methods were used to analyze the tissue for soluble sugars. A comparison of the methods revealed no significant diffennces in accuracy...

  5. High Performance Liquid Chromatographic Analysis of Phytoplankton Pigments Using a C16-Amide Column

    Science.gov (United States)

    A reverse-phase high performance liquid chromatographic (RP-HPLC) method was developed to analyze in a single run, most polar and non-polar chlorophylls and carotenoids from marine phytoplankton. The method is based on a RP-C16-Amide column and a ternary gradient system consistin...

  6. DETERMINATION OF CHLOROPHENOLS, NITROPHENOLS, AND METHYLPHENOLS IN GROUND-WATER SAMPLES USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY

    Science.gov (United States)

    A high performance liquid chromatography (HPLC) method was developed to quantitatively determine phenolic compounds and their isomers in aqueous samples. The HPLC method can analyze a mixture of 15 contaminants in the same analytical run with an analysis time of 25 minutes. The...

  7. DETERMINATION OF CHLOROPHEONIS, NITROPHENOIS AND METHYLPHENOIS IN GROUND-WATER SAMPLES USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY

    Science.gov (United States)

    A high performance liquid chromatography (HPLC) method was developed to quantitatively determine phenolic compounds and their isomers in aqueous samples. The HPLC method can analyze a mixture of 15 contaminants in the same analytical run with an analysis time of 25 minutes. The...

  8. High-performance liquid chromatography determination of dapsone, monoacetyldapsone, and pyrimethamine in filter paper blood spots

    DEFF Research Database (Denmark)

    Rønn, A M; Lemnge, M M; Angelo, H R

    1995-01-01

    A high-performance liquid chromatography method for the simultaneous analysis of dapsone (DDS), the major metabolite of DDS, monoacetyldapsone (MADDS), and pyrimethamine (PYR) was modified for capillary blood samples obtained by finger prick and dried on filter paper. Limit of quantitation using...

  9. Deformation and degradation of polymers in ultra-high-pressure liquid chromatography

    NARCIS (Netherlands)

    Uliyanchenko, E.; van der Wal, S.; Schoenmakers, P.J.

    2011-01-01

    Ultra-high-pressure liquid chromatography (UHPLC) using columns packed with sub-2 μm particles has great potential for separations of many types of complex samples, including polymers. However, the application of UHPLC for the analysis of polymers meets some fundamental obstacles. Small particles

  10. Benzoin Condensation: Monitoring a Chemical Reaction by High-Pressure Liquid Chromatography

    Science.gov (United States)

    Bhattacharya, Apurba; Purohit, Vikram C.; Bellar, Nicholas R.

    2004-01-01

    High-pressure liquid chromatography (HPLC) is the preferred method of separating a variety of materials in complex mixtures such as pharmaceuticals, polymers, soils, food products and biological fluids and is also considered to be a powerful analytical tool in both academia and industry. The use of HPLC analysis as a means of monitoring and…

  11. Nitrate and nitrite content in bottled beverages by ion-pair high-performance liquid chromatography.

    Science.gov (United States)

    Song, Yang; Deng, Gui-Fang; Xu, Xiang-Rong; Chen, Yong-Hong; Chen, Feng; Li, Hua-Bin

    2013-01-01

    Nitrate and nitrite levels in six types of beverages--total of 292 individual samples from 73 brands (four bottles each)--from Guangzhou city in China were evaluated by ion-pair high-performance liquid chromatography. All samples contained nitrate. Nitrate and nitrite ranges were 0.43-46.08 and beverages.

  12. Analysis of carprofen dosage forms and drug substance by high-performance liquid chromatography.

    Science.gov (United States)

    Ross, A J; Del Mauro, M D; Sokoloff, H K; Casey, D L

    1984-09-01

    A high-performance liquid chromatographic method for the analysis of carprofen in solid dosage forms and as the bulk drug substance was developed. The simple, accurate, reproducible, and stability-indicating method was shown to be applicable to drug substance and dosage form stability studies, as well as the quality control of carprofen dosage forms.

  13. High-throughput salting-out assisted liquid/liquid extraction with acetonitrile for the simultaneous determination of simvastatin and simvastatin acid in human plasma with liquid chromatography.

    Science.gov (United States)

    Zhang, Jun; Rodila, Ramona; Gage, Eric; Hautman, Mathew; Fan, Leimin; King, Linda L; Wu, Huaiqin; El-Shourbagy, Tawakol A

    2010-02-28

    Simvastatin (SS) is an effective cholesterol-lowering medicine, and is hydrolyzed to simvastatin acid (SSA) after oral administration. Due to SS and SSA inter-conversion and its pH and temperature dependence, SS and SSA quantitation is analytically challenging. Here we report a high-throughput salting-out assisted liquid/liquid extraction (SALLE) method with acetonitrile and mass spectrometry compatible salts for simultaneous LC-MS/MS analysis of SS and SSA. The sample preparation of a 96-well plate using SALLE was completed within 20 min, and the SALLE extract was diluted and injected into an LC-MS/MS system with a cycle time of 2.0 min/sample. The seamless interface of SALLE and LC-MS eliminated drying down step and thus potential sample exposure to room or higher temperature. The stability of SS and SSA in various concentration ratios in plasma was evaluated at room and low (4 degrees C) temperature and the low temperature (4 degrees C) was found necessary to maintain sample integrity. The short sample preparation time along with controlled temperature (2-4 degrees C) and acidity (pH 4.5) throughout sample preparation minimized the conversion of SS-->SSA to SS to 0.00% The method was validated with a lower limit of quantitation (LLOQ) of 0.094 ng mL(-1) for both SS and SSA and a sample volume of 100 microL. The method was used for a bioequivalence study with 4048 samples. Incurred sample reproducibility (ISR) analysis of 362 samples from the study exceeded ISR requirement with 99% re-analysis results within 100+/-20% of the original analysis results. Copyright 2010 Elsevier B.V. All rights reserved.

  14. Ag-In transient liquid phase bonding for high temperature stainless steel micro actuators

    OpenAIRE

    Andersson, Martin

    2013-01-01

    A stainless steel, high temperature, phase change micro actuator has been demonstrated using the solid-liquid phase transition of mannitol at 168°C and In-Ag transient liquid phase diffusion bonding. Joints created with this bonding technique can sustain temperatures up to 695°C, while being bonded at only 180°C, and have thicknesses between 1.4 to 6.0 μm. Physical vapour deposition, inkjet printing and electroplating have been evaluated as deposition methods for bond layers. For actuation, c...

  15. Unexpectedly high pressure for molecular dissociation in liquid hydrogen by electronic simulation.

    Science.gov (United States)

    Mazzola, Guglielmo; Yunoki, Seiji; Sorella, Sandro

    2014-03-19

    The study of the high pressure phase diagram of hydrogen has continued with renewed effort for about one century as it remains a fundamental challenge for experimental and theoretical techniques. Here we employ an efficient molecular dynamics based on the quantum Monte Carlo method, which can describe accurately the electronic correlation and treat a large number of hydrogen atoms, allowing a realistic and reliable prediction of thermodynamic properties. We find that the molecular liquid phase is unexpectedly stable, and the transition towards a fully atomic liquid phase occurs at much higher pressure than previously believed. The old standing problem of low-temperature atomization is, therefore, still far from experimental reach.

  16. Prediction of high frequency combustion instability in liquid propellant rocket engines

    Science.gov (United States)

    Kim, Y. M.; Chen, C. P.; Ziebarth, J. P.; Chen, Y. S.

    1992-01-01

    The present use of a numerical model developed for the prediction of high-frequency combustion stabilities in liquid propellant rocket engines focuses on (1) the overall behavior of nonlinear combustion instabilities (2) the effects of acoustic oscillations on the fuel-droplet vaporization and combustion process in stable and unstable engine operating conditions, oscillating flowfields, and liquid-fuel trajectories during combustion instability, and (3) the effects of such design parameters as inlet boundary conditions, initial spray conditions, and baffle length. The numerical model has yielded predictions of the tangential-mode combustion instability; baffle length and droplet size variations are noted to have significant effects on engine stability.

  17. Liquid-propellant droplet vaporization and combustion in high pressure environments

    Science.gov (United States)

    Yang, Vigor

    1991-01-01

    In order to correct the deficiencies of existing models for high-pressure droplet vaporization and combustion, a fundamental investigation into this matter is essential. The objective of this research are: (1) to acquire basic understanding of physical and chemical mechanisms involved in the vaporization and combustion of isolated liquid-propellant droplets in both stagnant and forced-convective environments; (2) to establish droplet vaporization and combustion correlations for the study of liquid-propellant spray combustion and two-phase flowfields in rocket motors; and (3) to investigate the dynamic responses of multicomponent droplet vaporization and combustion to ambient flow oscillations.

  18. Ionic liquid-assisted synthesis of highly dispersive bowknot-like ZnO microrods for photocatalytic applications

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Shuo [School of Chemistry and Chemical Engineering, Southeast University, Jiangsu Optoelectronic Functional Materials and Engineering Laboratory, Nanjing 211189 (China); Zhang, Yiwei, E-mail: zhangchem@seu.edu.cn [School of Chemistry and Chemical Engineering, Southeast University, Jiangsu Optoelectronic Functional Materials and Engineering Laboratory, Nanjing 211189 (China); Zhou, Yuming, E-mail: ymzhou@seu.edu.cn [School of Chemistry and Chemical Engineering, Southeast University, Jiangsu Optoelectronic Functional Materials and Engineering Laboratory, Nanjing 211189 (China); Zhang, Chao; Sheng, Xiaoli; Fang, Jiasheng; Zhang, Mingyu [School of Chemistry and Chemical Engineering, Southeast University, Jiangsu Optoelectronic Functional Materials and Engineering Laboratory, Nanjing 211189 (China); Yang, Yong [School of Chemical Engineering, Nanjing University of Science and Technology, 200 Xiao Ling Wei St, Nanjing 210094, Jiangsu (China)

    2017-04-01

    Highlights: • Ionic liquid was used as template for dispersive bowknot-like ZnO microrods. • The bowknot-like ZnO consists of individual microrods whose size is about 1 μm. • The formation mechanism of the ZnO materials is tentatively elucidated. • The bowknot-like ZnO exhibited the high catalytic activity in the photodegradation. • Photocatalytic activity is a result of the combination of various factors. - Abstract: Here we present a facile method for the preparation of highly dispersive ZnO materials by using ionic liquid 1-methyl-3-[3′-(trimethoxysilyl) propyl] imidazolium chloride as the template. The influence of ionic liquid concentration and calcined atmosphere on the photoactivity is studied. The samples were characterized by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), scanning electron microscope (SEM), N{sub 2} gas sorption and ultraviolet-visible diffuse reflectance spectroscopy. The results showed that the as-fabricated ZnO materials consisted of individual microrods with self-assembled bowknot-like architecture whose size was about 1 μm. The formation mechanism of the bowknot-like ZnO materials which is based on the self-assembly of ionic liquid is tentatively elucidated. Moreover, the ZnO-2.6N sample exhibited the higher activity for the photodegradation of MB than the photodegradation of MO and RhB. Furthermore, it was found that the ZnO materials calcined under air atmosphere showed the better photocatalytic activities than that of samples calcined under nitrogen atmosphere in the degradation of methylene blue (MB) under UV irradiation. And the special structure, surface area, adsorption capability of dye, the separation rate of photogenerated electron–hole pairs and band gap had effects on the photocatalytic activity of ZnO photocatalysts. O{sub 2}·{sup −} was the main active species for the photocatalytic degradation of MB. It is valuable to develop this facile

  19. High temperatures and high pressures Brillouin scattering studies of liquid H(2)O+CO(2) mixtures.

    Science.gov (United States)

    Qin, Junfeng; Li, Min; Li, Jun; Chen, Rongyan; Duan, Zhenhao; Zhou, Qiang; Li, Fangfei; Cui, Qiliang

    2010-10-21

    The Brillouin scattering spectroscopy studies have been conducted in a diamond anvil cell for a liquid mixtures composed of 95 mol % H(2)O and 5 mol % CO(2) under high temperatures and pressures. The sound velocity, refractive index, density, and adiabatic bulk modulus of the H(2)O+CO(2) mixtures were determined under pressures up to the freezing point at 293, 453, and 575 K. It is found from the experiment that sound velocities of the liquid mixture are substantially lower than those of pure water at 575 K, but not at lower temperatures. We presented an empirical relation of the density in terms of pressure and temperature. Our results show that liquid H(2)O+CO(2) mixtures are more compressible than water obtained from an existing equation of state of at 453 and 575 K.

  20. Autochthonous fungal strains with high ligninolytic activities from ...

    African Journals Online (AJOL)

    These positive strains were further screened in liquid culture and laccase, and lignin and Mn2+-oxidizing peroxidases activities were assayed. Of the 67 strains grown on liquid medium, 28 produced at least one of these 3 enzymes. The 8 highest producers of ligninolytic activities were identified by molecular techniques and ...

  1. Different antibacterial activity of novel theophylline-based ionic liquids - Growth kinetic and cytotoxicity studies.

    Science.gov (United States)

    Borkowski, Andrzej; Ławniczak, Łukasz; Cłapa, Tomasz; Narożna, Dorota; Selwet, Marek; Pęziak, Daria; Markiewicz, Bartosz; Chrzanowski, Łukasz

    2016-08-01

    The aim of this study was to investigate novel theophylline-based ionic liquids and their cytotoxic effects towards model Gram-positive and Gram-negative bacteria (Bacillus cereus and Escherichia coli, respectively). Growth kinetics, respiratory rates and dehydrogenase activities were studied in the presence of ionic liquids at concentrations ranging from 10 to 1000mg/L. Additionally, the influence of ionic liquids on bacterial cells associated with specific interactions based on the structure of cell wall was evaluated. This effect was assessed by viability tests and scanning electron microscope observations. The obtained results confirmed that ionic liquids exhibit different levels of toxicity in relation to Gram-positive and Gram-negative bacteria. Those effects are associated with the chemical structure of the cationic species of the ionic liquids and their critical micelle concentration value. It was established that the presence of an alkyl or allyl group increased the toxicity, whereas the presence of an aryl group in the cation decreased the toxic effect of ILs. Results presented in this study also revealed unexpected effects of self-aggregation of E. coli cells. Overall, it was established that the studied ILs exhibited higher toxicity towards Gram-positive bacteria due to different interactions between the ILs and the cell membranes. These findings may be of importance for the design of ILs with targeted antimicrobial properties. Copyright © 2016 Elsevier Inc. All rights reserved.

  2. Determination of prostaglandin analogs in cosmetic products by high performance liquid chromatography with tandem mass spectrometry.

    Science.gov (United States)

    Wittenberg, James B; Zhou, Wanlong; Wang, Perry G; Krynitsky, Alexander J

    2014-09-12

    A method was developed and validated for the determination of 16 prostaglandin analogs in cosmetic products. The QuEChERS (Quick, Easy, Cheap, Efficient, Rugged, Safe) liquid-liquid extraction method, typically used for pesticide residue analysis, was utilized as the sample preparation technique. The prostaglandin analogs were chromatographically separated and quantified using high performance liquid chromatography with tandem mass spectrometry (HPLC-MS/MS). Thirty-one cosmetic products were surveyed, and 13 products were determined to contain a prostaglandin analog with amounts ranging from 27.4 to 297μg/g. The calculated concentrations for the cosmetic products were in a similar range when compared to the concentrations of three different prostaglandin analog-containing prescription products. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. An Unexpected Reaction between 5-Hydroxymethylfurfural and Imidazolium-Based Ionic Liquids at High Temperatures

    Directory of Open Access Journals (Sweden)

    Zongbao K. Zhao

    2011-10-01

    Full Text Available A new compound was detected during the production of 5-hydroxymethylfurfural (HMF from glucose and cellulose in the ionic liquid 1-butyl-3-methylimidazolium chloride ([Bmim]Cl at high temperatures. Further experiments found that it was derived from the reaction of HMF with [Bmim]Cl. The structure of new compound was established as 1-butyl-2-(5’-methyl-2’-furoylimidazole (BMI based on nuclear magnetic resonance and mass spectrometry analysis, and a possible mechanism for its formation was proposed. Reactions of HMF with other imidazolium-based ionic liquids were performed to check the formation of BMI. Our results provided new insights in terms of side reactions between HMF and imidazolium-based ionic liquids, which should be valuable for designing better processes for the production of furans using biomass and related materials.

  4. Changes in permittivity and density of molecular liquids under high pressure.

    Science.gov (United States)

    Kiselev, Vladimir D; Kornilov, Dmitry A; Konovalov, Alexander I

    2014-04-03

    We collected and analyzed the density and permittivity of 57 nonpolar and dipolar molecular liquids at different temperatures (143 sets) and pressures (555 sets). No equation was found that could accurately predict the change to polar liquid permittivity by the change of its density in the range of the pressures and temperatures tested. Consequently, the influence of high hydrostatic pressure and temperature on liquid permittivity may be a more complicated process compared to density changes. The pressure and temperature coefficients of permittivity can be drastically larger than the pressure and temperature coefficients of density, indicating that pressure and particularly temperature significantly affect the structure of molecular liquids. These changes have less influence on the density change but can strongly affect the permittivity change. The clear relationship between the tangent and secant moduli of the permittivity curvatures under pressure for various molecular liquids at different temperatures was obtained, from which one can calculate the Tait equation coefficients from the experimental values of the pressure influence on the permittivity at ambient pressure.

  5. Recovery of hydrocarbon liquid from waste high density polyethylene by thermal pyrolysis

    Directory of Open Access Journals (Sweden)

    Sachin Kumar

    2011-12-01

    Full Text Available Thermal degradation of waste plastics in an inert atmosphere has been regarded as a productive method, because this process can convert waste plastics into hydrocarbons that can be used either as fuels or as a source of chemicals. In this work, waste high-density polyethylene (HDPE plastic was chosen as the material for pyrolysis. A simple pyrolysis reactor system has been used to pyrolyse waste HDPE with the objective of optimizing the liquid product yield at a temperature range of 400ºC to 550ºC. Results of pyrolysis experiments showed that, at a temperature of 450ºC and below, the major product of the pyrolysis was oily liquid which became a viscous liquid or waxy solid at temperatures above 475ºC. The yield of the liquid fraction obtained increased with the residence time for waste HDPE. The liquid fractions obtained were analyzed for composition using FTIR and GC-MS. The physical properties of the pyrolytic oil show the presence of a mixture of different fuel fractions such as gasoline, kerosene and diesel in the oil.

  6. Conductor of high electrical current at high temperature in oxygen and liquid metal environment

    Science.gov (United States)

    Powell, IV, Adam Clayton; Pati, Soobhankar; Derezinski, Stephen Joseph; Lau, Garrett; Pal, Uday B.; Guan, Xiaofei; Gopalan, Srikanth

    2016-01-12

    In one aspect, the present invention is directed to apparatuses for and methods of conducting electrical current in an oxygen and liquid metal environment. In another aspect, the invention relates to methods for production of metals from their oxides comprising providing a cathode in electrical contact with a molten electrolyte, providing a liquid metal anode separated from the cathode and the molten electrolyte by a solid oxygen ion conducting membrane, providing a current collector at the anode, and establishing a potential between the cathode and the anode.

  7. Reducing Dilution and Analysis Time in Online Comprehensive Two-Dimensional Liquid Chromatography by Active Modulation

    NARCIS (Netherlands)

    Gargano, A.F.G.; Duffin, M.; Navarro, P.; Schoenmakers, P.J.

    2016-01-01

    Online comprehensive two-dimensional liquid chromatography (LC × LC) offers ways to achieve high-performance separations in terms of peak capacity (exceeding 1000) and additional selectivity to realize applications that cannot be addressed with one-dimensional chromatography (1D-LC). However, the

  8. Thermal Analysis of Direct Liquid-Immersed Solar Receiver for High Concentrating Photovoltaic System

    Directory of Open Access Journals (Sweden)

    Xinyue Han

    2015-01-01

    Full Text Available Concentrator solar cells that operate at high solar concentration level must be cooled. In this paper, direct liquid immersion cooling of triple-junction solar cells (InGaP/InGaAs/Ge is proposed as a heat dissipation solution for dense-array high concentrating photovoltaic (HCPV systems. The advantages of triple-junction CPV cells immersed in a circulating dielectric liquid and dish HCPV technology are integrated into a CPV system to improve the system electrical conversion efficiency. An analytical model for the direct liquid-immersed solar receiver with triple-junction CPV cells is presented. The main outputs of the model are the components temperatures of the receiver and the system electrical efficiency. The influence of concentration factor, mass flow rate, and inlet liquid temperature on the operating temperature of the triple-junction CPV cells and the system electrical conversion efficiency are discussed. It is shown that the system electrical conversion efficiency is very high for a wide range of operating conditions. The three operating parameters have a major effect on the operating temperature of the triple-junction CPV cells and, by extension, system output power. The flow rate selection should match concentration factor to keep the triple-junction CPV cells temperature lower and increase the electrical conversion efficiency of the dense-array HCPV system.

  9. Quantitative analysis of benzodiazepines in vitreous humor by high-performance liquid chromatography

    Directory of Open Access Journals (Sweden)

    Elham Bazmi

    2016-08-01

    Full Text Available Objective: Benzodiazepines are frequently screened drugs in emergency toxicology, drugs of abuse testing, and in forensic cases. As the variations of benzodiazepines concentrations in biological samples during bleeding, postmortem changes, and redistribution could be biasing forensic medicine examinations, hence selecting a suitable sample and a validated accurate method is essential for the quantitative analysis of these main drug categories. The aim of this study was to develop a valid method for the determination of four benzodiazepines (flurazepam, lorazepam, alprazolam, and diazepam in vitreous humor using liquid–liquid extraction and high-performance liquid chromatography. Methods: Sample preparation was carried out using liquid–liquid extraction with n-hexane: ethyl acetate and subsequent detection by high-performance liquid chromatography method coupled to diode array detector. This method was applied to quantify benzodiazepines in 21 authentic vitreous humor samples. Linear curve for each drug was obtained within the range of 30–3000 ng/mL with coefficient of correlation higher than 0.99. Results: The limit of detection and quantitation were 30 and 100 ng/mL respectively for four drugs. The method showed an appropriate intra- and inter-day precision (coefficient of variation < 10%. Benzodiazepines recoveries were estimated to be over 80%. The method showed high selectivity; no additional peak due to interfering substances in samples was observed. Conclusion: The present method was selective, sensitive, accurate, and precise for the quantitative analysis of benzodiazepines in vitreous humor samples in forensic toxicology laboratory.

  10. Ionic Liquids as a Basis Context for Developing High school Chemistry Teaching Materials

    Science.gov (United States)

    Hernani; Mudzakir, A.; Sumarna, O.

    2017-02-01

    This research aims to produce a map of connectedness highschool chemical content with the context of the modern chemical materials applications based on ionic liquids. The research method is content analysis of journal articles related to the ionic liquid materials and the textbooks of high school chemistry and textbooks of general chemistry at the university. The instrument used is the development format of basic text that connect and combine content and context. The results showed the connectedness between: (1) the context lubricants ionic liquid with the content of ionic bonding, covalent bonding, metal bonding, interaction between the particles of matter, the elements of main group, the elements of transition group, and the classification of macromolecules; (2) the context of fuel cell electrolite with the content of ionic bonding, covalent bonding, metal bonding, interaction between the particles of matter, Volta cell, and electrolysis cell; (3) the contect of nanocellulose with the content of ionic bonding, covalent bonding, metal bonding, interaction between the particles of matter, colloid, carbon compound, and the classification of macromolecules; and (4) the context of artificial muscle system with the content of ionic bond, covalent bond, metal bonding, interaction between the particles of matter, hydrocarbons, electrolytes and non-electrolytes, and the classification of macromolecules. Based on the result of this content analysis, the context of ionic liquid is predicted can be utilized for the enrichment of high school chemistry and has the potential to become teaching material’s context of high school chemistry in the future.

  11. Reduction of68Ge activity containing liquid waste from68Ga PET chemistry in nuclear medicine and radiopharmacy by solidification.

    Science.gov (United States)

    de Blois, Erik; Chan, Ho Sze; Roy, Kamalika; Krenning, Eric P; Breeman, Wouter A P

    PET with 68 Ga from the TiO 2 - or SnO 2 - based 68 Ge/ 68 Ga generators is of increasing interest for PET imaging in nuclear medicine. In general, radionuclidic purity ( 68 Ge vs. 68 Ga activity) of the eluate of these generators varies between 0.01 and 0.001%. Liquid waste containing low amounts of 68 Ge activity is produced by eluting the 68 Ge/ 68 Ga generators and residues from PET chemistry. Since clearance level of 68 Ge activity in waste may not exceed 10 Bq/g, as stated by European Directive 96/29/EURATOM, our purpose was to reduce 68 Ge activity in solution from >10 kBq/g to waste. Most efficient method to reduce the 68 Ge activity is by sorption of TiO 2 or Fe 2 O 3 and subsequent centrifugation. The required 10 Bq per mL level of 68 Ge activity in waste was reached by Fe 2 O 3 logarithmically, whereas with TiO 2 asymptotically. The procedure with Fe 2 O 3 eliminates ≥90% of the 68 Ge activity per treatment. Eventually, to simplify the processing a recirculation system was used to investigate 68 Ge activity sorption on TiO 2 , Fe 2 O 3 or Zeolite. Zeolite was introduced for its high sorption at low pH, therefore 68 Ge activity containing waste could directly be used without further interventions. 68 Ge activity containing liquid waste at different HCl concentrations (0.05-1.0 M HCl), was recirculated at 1 mL/min. With Zeolite in the recirculation system, 68 Ge activity showed highest sorption.

  12. Enantiomeric separation of nonproteinogenic amino acids by high-performance liquid chromatography.

    Science.gov (United States)

    Ilisz, István; Aranyi, Anita; Pataj, Zoltán; Péter, Antal

    2012-12-21

    Amino acids are essential for life, and have many functions in metabolism. One particularly important function is to serve as the building blocks of peptides and proteins, giving rise complex three dimensional structures through disulfide bonds or crosslinked amino acids. Peptides are frequently cyclic and contain proteinogenic as well as nonproteinogenic amino acids in many instances. Since most of the amino acids contain a chiral carbon atom, the stereoisomers of all these amino acids and the peptides in which they are to be found may possess differences in biological activity in living systems. The development of methods for the separation of enantiomers has attracted great interest, since it became evident that the potential biological or pharmacological applications are mostly restricted to one of the enantiomers. The important analytical task of the separation of isomers is achieved mainly by chromatographic and electrophoretic methods. This special review surveys indirect and direct high-performance liquid chromatographic (HPLC) methods of biologically and pharmaceutically important enantiomers of nonproteinogenic amino acids and related compounds, with emphasis on the literature published from the beginning. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. High performance liquid chromatographic determination of oxeladin citrate and oxybutynin hydrochloride and their degradation products.

    Science.gov (United States)

    El-Gindy, Alaa

    2005-08-01

    Two high performance liquid chromatographic (HPLC) methods are presented for the determination of oxeladin citrate (OL) and oxybutynin hydrochloride (OB) and their degradation products. The first method was based on HPLC separation of OL from its degradation product using a Nucleosil C(18) column with a mobile phase consisting of acetonitrile -0.1% phosphoric acid (60:40 v/v). The second method was based on HPLC separation of OB from its degradation product using a VP-ODS C(18) column with a mobile phase consisting of acetonitrile/0.01 M potassium dihydrogen phosphate/diethylamine (60:40:0.2). Quantitation was achieved with UV detection at 220 nm based on peak area. The two HPLC methods were applied for the determination of OL or OB, their degradation products, methylparaben and propylparaben in pharmaceutical preparations. The proposed methods were used to investigate the kinetics of acidic and alkaline degradation processes of OL and OB at different temperatures and the apparent pseudofirst-order rate constant, half-life and activation energy were calculated. The pH-rate profiles of degradation of OL and OB in Britton-Robinson buffer solutions within the pH range 2-12 were studied.

  14. Removal of Aerosol Particles Generated from Vitrification Process for High-Level Liquid Wastes

    OpenAIRE

    加藤 功

    1990-01-01

    The vitrification technology has been developed for the high-level liquid waste (HLLW) from reprocessing nuclear spent fuel in PNC. The removal performance of the aerosol particles generated from the melting process was studied in a nonradioactive full-scale mock-up test facility (MTF). The off-gas treatment system consists of submerged bed scrubber (SBS), venturi scrubber, NOx absorber, high efficiency mist eliminater (HEME). Deoomtamination factors (DFs) were derived from the mass ratio of ...

  15. Influence of heat transfer on high pressure flame structure and stabilization in liquid rocket engines

    OpenAIRE

    Mari, Raphaël

    2015-01-01

    This research work deals with the problem of the flame stabilization in the context of high pressure liquid rocket engines. Flame stabilization in a rocket engine is a critical feature. An instability can lead to important damages of the engine or the destruction of the launcher and the satellite. The engines (Vulcain 2 and Vinci) of the Ariane 5, and the future Ariane 6, use the hydrogen/oxygen propellants. One characteristic of this couple is its high specific impulse. The launcher performa...

  16. High catechin concentrations detected in Withania somnifera (ashwagandha by high performance liquid chromatography analysis

    Directory of Open Access Journals (Sweden)

    Sulaiman Siti

    2011-08-01

    Full Text Available Abstract Background Withania somnifera is an important medicinal plant traditionally used in the treatment of many diseases. The present study was carried out to characterize the phenolic acids, flavonoids and 1,1-diphenyl-2-picrylhydrazyl radical (DPPH scavenging activities in methanolic extracts of W. somnifera fruits, roots and leaves (WSFEt, WSREt and WSLEt. Methods WSFEt, WSREt and WSLEt was prepared by using 80% aqueous methanol and total polyphenols, flavonoids as well as DPPH radical scavenging activities were determined by spectrophotometric methods and phenolic acid profiles were determined by HPLC methods. Results High concentrations of both phenolics and flavonoids were detected in all parts of the plant with the former ranging between 17.80 ± 5.80 and 32.58 ± 3.16 mg/g (dry weight and the latter ranging between 15.49 ± 1.02 and 31.58 ± 5.07 mg/g. All of the three different plant parts showed strong DPPH radical scavenging activities (59.16 ± 1.20 to 91.84 ± 0.38%. Eight polyphenols (gallic, syringic, benzoic, p-coumaric and vanillic acids as well as catechin, kaempferol and naringenin have been identified by HPLC in parts of the plant as well. Among all the polyphenols, catechin was detected in the highest concentration (13.01 ± 8.93 to 30.61 ± 11.41 mg/g. Conclusion The results indicating that W. somnifera is a plant with strong therapeutic properties thus further supporting its traditional claims. All major parts of W. somnifera such as the roots, fruits and leaves provide potential benefits for human health because of its high content of polyphenols and antioxidant activities with the leaves containing the highest amounts of polyphenols specially catechin with strong antioxidant properties.

  17. High catechin concentrations detected in Withania somnifera (ashwagandha) by high performance liquid chromatography analysis.

    Science.gov (United States)

    Alam, Nadia; Hossain, Monzur; Khalil, Md Ibrahim; Moniruzzaman, Mohammed; Sulaiman, Siti Amrah; Gan, Siew Hua

    2011-08-19

    Withania somnifera is an important medicinal plant traditionally used in the treatment of many diseases. The present study was carried out to characterize the phenolic acids, flavonoids and 1,1-diphenyl-2-picrylhydrazyl radical (DPPH) scavenging activities in methanolic extracts of W. somnifera fruits, roots and leaves (WSFEt, WSREt and WSLEt). WSFEt, WSREt and WSLEt was prepared by using 80% aqueous methanol and total polyphenols, flavonoids as well as DPPH radical scavenging activities were determined by spectrophotometric methods and phenolic acid profiles were determined by HPLC methods. High concentrations of both phenolics and flavonoids were detected in all parts of the plant with the former ranging between 17.80 ± 5.80 and 32.58 ± 3.16 mg/g (dry weight) and the latter ranging between 15.49 ± 1.02 and 31.58 ± 5.07 mg/g. All of the three different plant parts showed strong DPPH radical scavenging activities (59.16 ± 1.20 to 91.84 ± 0.38%). Eight polyphenols (gallic, syringic, benzoic, p-coumaric and vanillic acids as well as catechin, kaempferol and naringenin) have been identified by HPLC in parts of the plant as well. Among all the polyphenols, catechin was detected in the highest concentration (13.01 ± 8.93 to 30.61 ± 11.41 mg/g). The results indicating that W. somnifera is a plant with strong therapeutic properties thus further supporting its traditional claims. All major parts of W. somnifera such as the roots, fruits and leaves provide potential benefits for human health because of its high content of polyphenols and antioxidant activities with the leaves containing the highest amounts of polyphenols specially catechin with strong antioxidant properties.

  18. Spectroscopic measurements of lithium influx from an actively water-cooled liquid lithium limiter on FTU

    Energy Technology Data Exchange (ETDEWEB)

    Apruzzese, G.M., E-mail: gerarda.apruzzese@enea.it; Apicella, M.L.; Maddaluno, G.; Mazzitelli, G.; Viola, B.

    2017-04-15

    Since 2006, experiments using a liquid lithium limiter (LLL) were successfully performed on FTU, pointing out the problem of the quantity of lithium in the plasma, especially in conditions of strong evaporation due to the high temperature of limiter surface. In order to avoid the strong evaporation it is necessary to control the temperature by removing the heat from the limiter during the plasma exposure. To explore this issue a new actively cooled lithium limiter (CLL) has been installed and tested in FTU. Suitable monitors to detect the presence of lithium in the plasma are the spectroscopic diagnostics in the visible range that permit to measure the flux of lithium, coming from the limiter surface, through the brightness of the LiI spectral lines. For this aim an Optical Multichannel Analyser (OMA) spectrometer and a single wavelength impurities monitor have been used. The analysis of the Li influx signals has permitted to monitor the effects of interaction between the plasma and the limiter connected to the thermal load. Particular attention has been paid on the possible occurrence of sudden rise of the signals, which is an index of a strong interaction that could lead to a disruption. On the other hand, the appearance of significant signals gives useful indication if the interaction with the plasma has taken place.

  19. Thermophysical Properties Measurement of High-Temperature Liquids Under Microgravity Conditions in Controlled Atmospheric Conditions

    Science.gov (United States)

    Watanabe, Masahito; Ozawa, Shumpei; Mizuno, Akotoshi; Hibiya, Taketoshi; Kawauchi, Hiroya; Murai, Kentaro; Takahashi, Suguru

    2012-01-01

    Microgravity conditions have advantages of measurement of surface tension and viscosity of metallic liquids by the oscillating drop method with an electromagnetic levitation (EML) device. Thus, we are preparing the experiments of thermophysical properties measurements using the Materials-Science Laboratories ElectroMagnetic-Levitator (MSL-EML) facilities in the international Space station (ISS). Recently, it has been identified that dependence of surface tension on oxygen partial pressure (Po2) must be considered for industrial application of surface tension values. Effect of Po2 on surface tension would apparently change viscosity from the damping oscillation model. Therefore, surface tension and viscosity must be measured simultaneously in the same atmospheric conditions. Moreover, effect of the electromagnetic force (EMF) on the surface oscillations must be clarified to obtain the ideal surface oscillation because the EMF works as the external force on the oscillating liquid droplets, so extensive EMF makes apparently the viscosity values large. In our group, using the parabolic flight levitation experimental facilities (PFLEX) the effect of Po2 and external EMF on surface oscillation of levitated liquid droplets was systematically investigated for the precise measurements of surface tension and viscosity of high temperature liquids for future ISS experiments. We performed the observation of surface oscillations of levitated liquid alloys using PFLEX on board flight experiments by Gulfstream II (G-II) airplane operated by DAS. These observations were performed under the controlled Po2 and also under the suitable EMF conditions. In these experiments, we obtained the density, the viscosity and the surface tension values of liquid Cu. From these results, we discuss about as same as reported data, and also obtained the difference of surface oscillations with the change of the EMF conditions.

  20. Optimization of oligomeric enzyme activity in ionic liquids using Rhodotorula glutinis yeast phenylalanine ammonia lyase.

    Science.gov (United States)

    Barron, Christiaan C; Sponagle, Brandon J D; Arivalagan, Pugazhendhi; D'Cunha, Godwin B

    2017-01-01

    Phenylalanine ammonia lyase (E.C.4.3.1.24, PAL) activity of Rhodotorula glutinis yeast has been demonstrated in four commonly used ionic liquids. PAL forward reaction was carried out in 1-butyl-3-methylimidazolium methyl sulfate ([BMIM][MeSO4]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]), 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) and 1-butyl-3-methylimidazolium lactate ([BMIM][lactate]). Our experiments have revealed that PAL is catalytically active in ionic liquids and the enzyme activity in ([BMIM][PF6]) is comparable to that obtained in aqueous buffer medium. Different conditions were optimized for maximal PAL forward activity including time of incubation (30.0min)L-phenylalanine substrate concentration (30.0mM), nature of buffer (50.0mM Tris-HCl), pH (9.0), temperature (37°C), and speed of agitation (100 rev min-1). Under these optimized conditions, about 83% conversion of substrate to product was obtained for the PAL forward reaction that was determined using UV spectroscopy at 290nm. PAL reverse reaction in ([BMIM][PF6]) was determined spectrophotometrically at 520nm; and about 59% substrate conversion was obtained. This data provides further knowledge in enzyme biocatalysis in non-aqueous media, and may be of importance when studying the function of other oligomeric/multimeric proteins and enzymes in ionic liquids. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. PCF Based Sensor with High Sensitivity, High Birefringence and Low Confinement Losses for Liquid Analyte Sensing Applications

    Directory of Open Access Journals (Sweden)

    Huseyin Ademgil

    2015-12-01

    Full Text Available In this paper, we report a design of high sensitivity Photonic Crystal Fiber (PCF sensor with high birefringence and low confinement losses for liquid analyte sensing applications. The proposed PCF structures are designed with supplementary elliptical air holes in the core region vertically-shaped V-PCF and horizontally-shaped H-PCF. The full vectorial Finite Element Method (FEM simulations performed to examine the sensitivity, the confinement losses, the effective refractive index and the modal birefringence features of the proposed elliptical air hole PCF structures. We show that the proposed PCF structures exhibit high relative sensitivity, high birefringence and low confinement losses simultaneously for various analytes.

  2. Chromium liquid waste inertization in an inorganic alkali activated matrix: leaching and NMR multinuclear approach.

    Science.gov (United States)

    Ponzoni, Chiara; Lancellotti, Isabella; Barbieri, Luisa; Spinella, Alberto; Saladino, Maria Luisa; Martino, Delia Chillura; Caponetti, Eugenio; Armetta, Francesco; Leonelli, Cristina

    2015-04-09

    A class of inorganic binders, also known as geopolymers, can be obtained by alkali activation of aluminosilicate powders at room temperature. The process is affected by many parameters (curing time, curing temperature, relative humidity etc.) and leads to a resistant matrix usable for inertization of hazardous waste. In this study an industrial liquid waste containing a high amount of chromium (≈ 2.3 wt%) in the form of metalorganic salts is inertized into a metakaolin based geopolymer matrix. One of the innovative aspects is the exploitation of the water contained in the waste for the geopolymerization process. This avoided any drying treatment, a common step in the management of liquid hazardous waste. The evolution of the process--from the precursor dissolution to the final geopolymer matrix hardening--of different geopolymers containing a waste amount ranging from 3 to 20%wt and their capability to inertize chromium cations were studied by: i) the leaching tests, according to the EN 12,457 regulation, at different curing times (15, 28, 90 and 540 days) monitoring releases of chromium ions (Cr(III) and Cr(VI)) and the cations constituting the aluminosilicate matrix (Na, Si, Al); ii) the humidity variation for different curing times (15 and 540 days); iii) SEM characterization at different curing times (28 and 540 days); iv) the trend of the solution conductivity and pH during the leaching test; v) the characterization of the short-range ordering in terms of TOT bonds (where T is Al or Si) by (29)Si and (27)Al solid state magic-angle spinning nuclear magnetic resonance (ss MAS NMR) for geopolymers containing high amounts of waste (10-20%wt). The results show the formation of a stable matrix after only 15 days independently on the waste amount introduced; the longer curing times increase the matrices stabilities and their ability to immobilize chromium cations. The maximum amount of waste that can be inertized is around 10 wt% after a curing time of 28 days

  3. A novel high-throughput method for supported liquid extraction of retinol and alpha-tocopherol from human serum and simultaneous quantitation by liquid chromatography tandem mass spectrometry.

    Science.gov (United States)

    Hinchliffe, Edward; Rudge, James; Reed, Paul

    2016-07-01

    Measurement of vitamin A (retinol) and E (alpha-tocopherol) in UK clinical laboratories is currently performed exclusively by high-performance liquid chromatography with ultraviolet detection. We investigated whether retinol and alpha-tocopherol could be measured simultaneously by liquid chromatography tandem mass spectrometry. Serum samples (100 μL) were extracted using Isolute + Supported Liquid Extraction plates. Chromatography was performed on a Phenomenex Kinetex Biphenyl 2.6 μm, 50 × 2.1 mm column, and liquid chromatography tandem mass spectrometry on a Waters Acquity TQD. Injection-to-injection time was 4.3 min. The assay was validated according to published guidelines. Patient samples were used to compare liquid chromatography tandem mass spectrometry and high-performance liquid chromatography with ultraviolet detection methods. For retinol and alpha-tocopherol, respectively, the assay was linear up to 6.0 and 80.0 μmol/L, and lower limit of quantification was 0.07 and 0.26 μmol/L. Intra and interassay imprecision were within desirable analytical specifications. Analysis of quality control material aligned to NIST SRM 968e, and relative spiked recovery from human serum, both yielded results within 15% of target values. Method comparison with high-performance liquid chromatography with ultraviolet detection methodology demonstrated a negative bias for retinol and alpha-tocopherol by the liquid chromatography tandem mass spectrometry method. Analysis of United Kingdom National External Quality Assurance Scheme samples yielded mean bias from the target value of +3.0% for retinol and -11.2% for alpha-tocopherol. We have developed a novel, high-throughput method for extraction of retinol and alpha-tocopherol from human serum followed by simultaneous quantitation by liquid chromatography tandem mass spectrometry. The method offers a rapid, sensitive, specific and cost-effective alternative to high-performance liquid chromatography with

  4. Activated aluminum oxide selectively retaining long chain n-alkanes: Part II. Integration into an on-line high performance liquid chromatography-liquid chromatography-gas chromatography-flame ionization detection method to remove plant paraffins for the determination of mineral paraffins in foods and environmental samples.

    Science.gov (United States)

    Fiselier, Katell; Fiorini, Dennis; Grob, Koni

    2009-02-16

    Aluminum oxide activated by heating to 300-400 degrees C retains n-alkanes with more than about 20 carbon atoms, whereas iso-alkanes largely pass non-retained (with characteristics described in more detail in Part I). This property is useful for the analysis of mineral oil contamination of foods and other matrices: it enables the removal of plant n-alkanes, typically ranging from C(23) to C(33), when they disturb the analysis of mineral paraffins (usually almost exclusively consisting of iso-alkanes). An on-line HPLC-LC-GC-FID method is proposed in which a first silica gel HPLC column isolates the paraffins from the bulk of edible oils or extracts and is backflushed with dichloromethane. In a second separation step, a 10 cm x 2 mm i.d. column packed with activated aluminum oxide separates the long chain n-alkanes from the fraction of the iso-alkanes which is transferred to GC-FID by the on-column interface and the retention gap technique. The retained n-alkanes are removed by flushing with iso-octane.

  5. Peculiar surface behavior of some ionic liquids based on active pharmaceutical ingredients.

    Science.gov (United States)

    Restolho, José; Mata, José Luis; Saramago, Benilde

    2011-02-21

    The ionic liquids based on biologically active cations and anions, commonly designated by ionic liquids based on active pharmaceutical ingredients (ILs-APIs), are interesting compounds for use in pharmaceutical applications. Lidocaine docusate, ranitidine docusate, and didecyldimethylammonium ibuprofen are examples of promising ILs-APIs that were recently synthesized. They were submitted to biological testing and calorimetric measurements, but nothing is known about their surface properties. In this work, we measured the surface tension and the contact angles on both hydrophilic and hydrophobic surfaces in a temperature range as wide as possible. Based on the wettability data, the polarity fractions were estimated using the Fowkes theory. The peculiar surface behavior observed was tentatively attributed to the presence of mesophases.

  6. Liquid-liquid extraction combined with high performance liquid chromatography-diode array-ultra-violet for simultaneous determination of antineoplastic drugs in plasma

    Directory of Open Access Journals (Sweden)

    Ananda Lima Sanson

    2011-06-01

    Full Text Available A liquid-liquid extraction (LLE combined with high-performance liquid chromatography-diode array detection method for simultaneous analysis of four chemically and structurally different antineoplastic drugs (cyclophosphamide, doxorubicin, 5-fluorouracil and ifosfamide was developed. The assay was performed by isocratic elution, with a C18 column (5 µm, 250 x 4.6 mm and mobile phase constituted by water pH 4.0- acetonitrile-methanol (68:19:13, v/v/v, which allowed satisfactory separation of the compounds of interest. LLE, with ethyl acetate, was used for sample clean-up with recoveries ranging from 60 to 98%. The linear ranges were from 0.5 to 100 µg mL-1, for doxorubicin and 1 to 100 µg mL-1, for the other compounds. The relative standard deviations ranged from 5.5 to 17.7%. This method is a fast and simple alternative that can be used, simultaneously, for the determination of the four drugs in plasma, with a range enabling quantification of the drugs in pharmacokinetics, bioequivalence and therapeutic drug-monitoring studies.Um método de extração líquido-líquido (ELL combinado com cromatografia líquida de alta eficiência-detector de arranjo de diodos foi desenvolvido para análise simultânea de quatro fármacos antineoplásicos quimicamente e estruturalmente diferentes (ciclofosfamida, doxorrubicina, fluoruracila e ifosfamida. O estudo foi realizado sob condições isocráticas, com coluna C18 (5µm, 250 x 4.6 mm e fase móvel constituída por água pH 4.0-acetonitrila-metanol (68:19:13, v/v/v, que permitiu separação satisfatória dos analitos de interesse. A ELL, com acetato de etila, foi utilizada para limpeza da amostra, com recuperação variando de 60 a 98%. As faixas foram lineares de 0,5 a 100 µg mL-1 para doxorrubicina e 1 a 100 µg mL-1 para os outros compostos. O desvio padrão relativo variou de 5,5 a 17,7%. Este método é uma alternativa rápida e simples que pode ser usado, simultaneamente, para a determinação dos

  7. Vortex-assisted magnetic β-cyclodextrin/attapulgite-linked ionic liquid dispersive liquid-liquid microextraction coupled with high-performance liquid chromatography for the fast determination of four fungicides in water samples.

    Science.gov (United States)

    Yang, Miyi; Xi, Xuefei; Wu, Xiaoling; Lu, Runhua; Zhou, Wenfeng; Zhang, Sanbing; Gao, Haixiang

    2015-02-13

    A novel microextraction technique combining magnetic solid-phase microextraction (MSPME) with ionic liquid dispersive liquid-liquid microextraction (IL-DLLME) to determine four fungicides is presented in this work for the first time. The main factors affecting the extraction efficiency were optimized by the one-factor-at-a-time approach and the impacts of these factors were studied by an orthogonal design. Without tedious clean-up procedure, analytes were extracted from the sample to the adsorbent and organic solvent and then desorbed in acetonitrile prior to chromatographic analysis. Under the optimum conditions, good linearity and high enrichment factors were obtained for all analytes, with correlation coefficients ranging from 0.9998 to 1.0000 and enrichment factors ranging 135 and 159 folds. The recoveries for proposed approach were between 98% and 115%, the limits of detection were between 0.02 and 0.04 μg L(-1) and the RSDs changed from 2.96 to 4.16. The method was successfully applied in the analysis of four fungicides (azoxystrobin, chlorothalonil, cyprodinil and trifloxystrobin) in environmental water samples. The recoveries for the real water samples ranged between 81% and 109%. The procedure proved to be a time-saving, environmentally friendly, and efficient analytical technique. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Pharmacokinetics and Tissue Distribution Study of Praeruptorin D from Radix Peucedani in Rats by High-Performance Liquid Chromatography (HPLC

    Directory of Open Access Journals (Sweden)

    Xue Du

    2012-07-01

    Full Text Available Praeruptorin D (PD, a major pyranocoumarin isolated from Radix Peucedani, exhibited antitumor and anti-inflammatory activities. The aim of this study was to investigate the pharmacokinetics and tissue distribution of PD in rats following intravenous (i.v. administration. The levels of PD in plasma and tissues were measured by a simple and sensitive reversed-phase high-performance liquid chromatography (HPLC method. The biosamples were treated by liquid-liquid extraction (LLE with methyl tert-butyl ether (MTBE and osthole was used as the internal standard (IS. The chromatographic separation was accomplished on a reversed-phase C18 column using methanol-water (75:25, v/v as mobile phase at a flow rate of 0.8 mL/min and ultraviolet detection wave length was set at 323 nm. The results demonstrate that this method has excellent specificity, linearity, precision, accuracy and recovery. The pharmacokinetic study found that PD fitted well into a two-compartment model with a fast distribution phase and a relative slow elimination phase. Tissue distribution showed that the highest concentration was observed in the lung, followed by heart, liver and kidney. Furthermore, PD can also be detected in the brain, which indicated that PD could cross the blood-brain barrier after i.v. administration.

  9. Conformational changes in human Hsp70 induced by high hydrostatic pressure produce oligomers with ATPase activity but without chaperone activity.

    Science.gov (United States)

    Araujo, Thaís L S; Borges, Julio Cesar; Ramos, Carlos H; Meyer-Fernandes, José Roberto; Oliveira Júnior, Reinaldo S; Pascutti, Pedro G; Foguel, Debora; Palhano, Fernando L

    2014-05-13

    We investigated the folding of the 70 kDa human cytosolic inducible protein (Hsp70) in vitro using high hydrostatic pressure as a denaturing agent. We followed the structural changes in Hsp70 induced by high hydrostatic pressure using tryptophan fluorescence, molecular dynamics, circular dichroism, high-performance liquid chromatography gel filtration, dynamic light scattering, ATPase activity, and chaperone activity. Although monomeric, Hsp70 is very sensitive to hydrostatic pressure; after pressure had been removed, the protein did not return to its native sate but instead formed oligomeric species that lost chaperone activity but retained ATPase activity.

  10. High energy gas fracture experiments in liquid-filled boreholes: potential geothermal application

    Energy Technology Data Exchange (ETDEWEB)

    Cuderman, J.F.; Chu, T.Y.; Jung, J.; Jacobson, R.D.

    1986-07-01

    High Energy Gas Fracturing is a tailored pulse fracturing technique which uses propellants to obtain controlled fracture initiation and extension. Borehole pressurization rates can be tailored, by suitable choice of propellants, to produce four or eight fractures radiating from the wellbore. High Energy Gas Fracture (HEGF) research is conducted at DOE's Nevada Test Site (NTS) in a tunnel complex where experiments can be done under realistic in situ stress conditions (1400 psi (9.7 MPa) overburden stress). Pressure measurements are made in the test borehole during all fracturing experiments. Experiments are mined back to provide direct observation of fracturing obtained. The initial objective of HEGF research was to develop multiple fracturing technology for application in gas well stimulation. HEGF research at NTS and in Devonian shale demonstration tests has resulted in a completed technology for multiple fracturing in uncased, liquid-free wellbores. Current resarch is directed toward extending the technique to liquid-filled boreholes for application in geothermal in addition to gas and oil wells. For liquid-free boreholes, multiple fracturing is specified in terms of pressure risetime required for a given borehole diameter. Propellants are mixed to achieve the desired risetime using a semiempirical mixing equation. The same techniques were successfully applied to fracturing in liquid-filled wellbores. However, the addition of liquid in the borehole results in a significantly more complicated fracturing behavior. Hydrodynamic effects are significant. Multiple fractures are initiated but only some propagated. Multiple- and hydraulic-type fracturing and wellbore crushing have been observed in the same experiment. The potential of using HEGB for geothermal well stimulation has been demonstrated through the present experiments. 18 refs., 40 figs., 4 tabs.

  11. Synthesis, characterization and antiproliferative activity on cancer cell lines of new ionic liquids from ampicillin

    OpenAIRE

    Ferraz, Ricardo; Costa-Rodrigues, João; Fernandes,Maria Helena; Branco, Luís; Marrucho, Isabel; Ponte, Manuel Nunes; Prudêncio, Cristina; Noronha, João Paulo; Petrovski, Zeljko

    2011-01-01

    Ionic Liquids (ILs) are ionic compounds that possess melting temperature below 100ºC and they have been a topic of great interest since the mid-1990s due to their unique properties. The range of IL uses has been broadened, due to a significant increase in the variety of physical, chemical and biological ILs properties. They are now used as Active Pharmaceutical Ingredients (APIs) and recent interests are focused on their application as innovative solutions in new medical treatment and deliver...

  12. Vortex-assisted liquid-liquid-liquid microextraction followed by high performance liquid chromatography for the simultaneous determination of fourteen phenolic acids in honey, iced tea and canned coffee drinks.

    Science.gov (United States)

    Shalash, Marwan; Makahleh, Ahmad; Salhimi, Salizawati Muhamad; Saad, Bahruddin

    2017-11-01

    A vortex-assisted liquid-liquid-liquid microextraction method followed by high performance liquid chromatography-diode array detection for the determination of fourteen phenolic acids (cinnamic, m-coumaric, chlorogenic, syringic, ferulic, o-coumaric, p-coumaric, vanillic, p-hydroxybenzoic, caffeic, 2, 4-dihydroxybenzoic, sinapic, gentisic and gallic acids) in honey, iced tea and canned coffee drink samples has been developed. The separation was achieved using a Poroshell 120-EC-C18 column under a gradient elution at a flow rate of 0.6mLmin-1 and mobile phase composed of methanol and acetic acid (1%, v/v). Under the optimum chromatographic conditions, the fourteen phenolic acids were separated in less than 32min. The extraction was performed using a small volume (400µL) of ternary organic solvents (1-pentanol, propyl acetate and 1-hexanol) dispersed into the aqueous sample (10mL) and assisted by vortex agitation (2500rpm for 45s), the analytes were next back-extracted from the organic solvent using 0.02M KOH (40µL) with vortex speed and time of 2500rpm and 60s, respectively. Under these conditions, enrichment factors of 30-193-fold were achieved. The limits of detection (LODs) were 0.05-0.68µgL-1. Recoveries in honey, iced tea and canned coffee drinks were in the range 72.2-112%. The method was successfully applied for the determination of the phenolic acids in honey, iced tea and canned coffee drinks. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. High-gravity spreading of liquid puddles on wetting flexible substrates

    Science.gov (United States)

    Yang, Chen; Burrous, Adam; Xie, Jingjin; Shaikh, Hassan; Elike-Avion, Akofa; Rojas Rodriguez, Luis; Ramachandran, Adithya; Choi, Wonjae; Mazzeo, Aaron D.

    2016-02-01

    This letter describes a mechanical approach of using high gravity to decrease the capillary length and increase the spreading rate of liquid puddles on wetting flexible substrates. By using centrifugation and a flexible substrate floating on a high-density liquid, uniform acceleration enhances the spreading of liquid puddles. Under high gravity of 600 g, the capillary length reduces by a factor of 24.5 to ˜60 μm. The reduction in capillary length results in gravity dominating the spreading of small puddles that would otherwise have slower spreading driven by both surface tension and gravity of 1 g. The resulting measurements suggest that derived expressions in the literature for gravity-driven spreading of puddles under earth's standard gravity extend to predicting the behavior of sufficiently large puddles spreading on flexible substrates exposed to more than 100 g of acceleration. This work explores the spreading of puddles/coatings under high gravity, and the techniques described in this work will allow further interrogation of the transition between surface tension- and gravity-driven spreading.

  14. High-power liquid-lithium target prototype for accelerator-based boron neutron capture therapy.

    Science.gov (United States)

    Halfon, S; Paul, M; Arenshtam, A; Berkovits, D; Bisyakoev, M; Eliyahu, I; Feinberg, G; Hazenshprung, N; Kijel, D; Nagler, A; Silverman, I

    2011-12-01

    A prototype of a compact Liquid-Lithium Target (LiLiT), which will possibly constitute an accelerator-based intense neutron source for Boron Neutron Capture Therapy (BNCT) in hospitals, was built. The LiLiT setup is presently being commissioned at Soreq Nuclear Research Center (SNRC). The liquid-lithium target will produce neutrons through the (7)Li(p,n)(7)Be reaction and it will overcome the major problem of removing the thermal power generated using a high-intensity proton beam (>10 kW), necessary for sufficient neutron flux. In off-line circulation tests, the liquid-lithium loop generated a stable lithium jet at high velocity, on a concave supporting wall; the concept will first be tested using a high-power electron beam impinging on the lithium jet. High intensity proton beam irradiation (1.91-2.5 MeV, 2-4 mA) will take place at Soreq Applied Research Accelerator Facility (SARAF) superconducting linear accelerator currently in construction at SNRC. Radiological risks due to the (7)Be produced in the reaction were studied and will be handled through a proper design, including a cold trap and appropriate shielding. A moderator/reflector assembly is planned according to a Monte Carlo simulation, to create a neutron spectrum and intensity maximally effective to the treatment and to reduce prompt gamma radiation dose risks. Copyright © 2011 Elsevier Ltd. All rights reserved.

  15. High-power liquid-lithium target prototype for accelerator-based boron neutron capture therapy

    Energy Technology Data Exchange (ETDEWEB)

    Halfon, S., E-mail: halfon@phys.huji.ac.il [Soreq NRC, Yavne, Israel 81800 (Israel)] [Racah Institute of Physics, Hebrew University, Jerusalem, 91904 (Israel); Paul, M. [Racah Institute of Physics, Hebrew University, Jerusalem, 91904 (Israel); Arenshtam, A.; Berkovits, D.; Bisyakoev, M.; Eliyahu, I. [Soreq NRC, Yavne, 81800 (Israel); Feinberg, G. [Soreq NRC, Yavne, Israel 81800 (Israel)] [Racah Institute of Physics, Hebrew University, Jerusalem, 91904 (Israel); Hazenshprung, N.; Kijel, D.; Nagler, A.; Silverman, I. [Soreq NRC, Yavne, 81800 (Israel)

    2011-12-15

    A prototype of a compact Liquid-Lithium Target (LiLiT), which will possibly constitute an accelerator-based intense neutron source for Boron Neutron Capture Therapy (BNCT) in hospitals, was built. The LiLiT setup is presently being commissioned at Soreq Nuclear Research Center (SNRC). The liquid-lithium target will produce neutrons through the {sup 7}Li(p,n){sup 7}Be reaction and it will overcome the major problem of removing the thermal power generated using a high-intensity proton beam (>10 kW), necessary for sufficient neutron flux. In off-line circulation tests, the liquid-lithium loop generated a stable lithium jet at high velocity, on a concave supporting wall; the concept will first be tested using a high-power electron beam impinging on the lithium jet. High intensity proton beam irradiation (1.91-2.5 MeV, 2-4 mA) will take place at Soreq Applied Research Accelerator Facility (SARAF) superconducting linear accelerator currently in construction at SNRC. Radiological risks due to the {sup 7}Be produced in the reaction were studied and will be handled through a proper design, including a cold trap and appropriate shielding. A moderator/reflector assembly is planned according to a Monte Carlo simulation, to create a neutron spectrum and intensity maximally effective to the treatment and to reduce prompt gamma radiation dose risks.

  16. High-flux neutron source based on a liquid-lithium target

    Energy Technology Data Exchange (ETDEWEB)

    Halfon, S. [Soreq NRC, Yavne, 81800 (Israel) and Racah Institute of Physics, Hebrew University, Jerusalem, 91904 (Israel); Feinberg, G. [Soreq NRC, Yavne, 81800 (Israel) and Racah Institute of Physics, Hebrew University, Jerusalem, 91904 (Israel); Paul, M. [Racah Institute of Physics, Hebrew University, Jerusalem, 91904 (Israel); Arenshtam, A.; Berkovits, D.; Kijel, D.; Nagler, A.; Eliyahu, I.; Silverman, I. [Soreq NRC, Yavne, 81800 (Israel)

    2013-04-19

    A prototype compact Liquid Lithium Target (LiLiT), able to constitute an accelerator-based intense neutron source, was built. The neutron source is intended for nuclear astrophysical research, boron neutron capture therapy (BNCT) in hospitals and material studies for fusion reactors. The LiLiT setup is presently being commissioned at Soreq Nuclear research Center (SNRC). The lithium target will produce neutrons through the {sup 7}Li(p,n){sup 7}Be reaction and it will overcome the major problem of removing the thermal power generated by a high-intensity proton beam, necessary for intense neutron flux for the above applications. The liquid-lithium loop of LiLiT is designed to generate a stable lithium jet at high velocity on a concave supporting wall with free surface toward the incident proton beam (up to 10 kW). During off-line tests, liquid lithium was flown through the loop and generated a stable jet at velocity higher than 5 m/s on the concave supporting wall. The target is now under extensive test program using a high-power electron-gun. Up to 2 kW electron beam was applied on the lithium flow at velocity of 4 m/s without any flow instabilities or excessive evaporation. High-intensity proton beam irradiation will take place at SARAF (Soreq Applied Research Accelerator Facility) superconducting linear accelerator currently in commissioning at SNRC.

  17. A Low-cost, High-yield Process for the Direct Productin of High Energy Density Liquid Fuel from Biomass

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, Rakesh

    2014-02-21

    The primary objective and outcome of this project was the development and validation of a novel, low-cost, high-pressure fast-hydropyrolysis/hydrodeoxygenation (HDO) process (H{sub 2}Bioil) using supplementary hydrogen (H{sub 2}) to produce liquid hydrocarbons from biomass. The research efforts under the various tasks of the project have culminated in the first experimental demonstration of the H2Bioil process, producing 100% deoxygenated >C4+ hydrocarbons containing 36-40% of the carbon in the feed of pyrolysis products from biomass. The demonstrated H{sub 2}Bioil process technology (i.e. reactor, catalyst, and downstream product recovery) is scalable to a commercial level and is estimated to be economically competitive for the cases when supplementary H{sub 2} is sourced from coal, natural gas, or nuclear. Additionally, energy systems modeling has revealed several process integration options based on the H{sub 2}Bioil process for energy and carbon efficient liquid fuel production. All project tasks and milestones were completed or exceeded. Novel, commercially-scalable, high-pressure reactors for both fast-hydropyrolysis and hydrodeoxygenation were constructed, completing Task A. These reactors were capable of operation under a wide-range of conditions; enabling process studies that lead to identification of optimum process conditions. Model compounds representing biomass pyrolysis products were studied, completing Task B. These studies were critical in identifying and developing HDO catalysts to target specific oxygen functional groups. These process and model compound catalyst studies enabled identification of catalysts that achieved 100% deoxygenation of the real biomass feedstock, sorghum, to form hydrocarbons in high yields as part of Task C. The work completed during this grant has identified and validated the novel and commercially scalable H2Bioil process for production of hydrocarbon fuels from biomass. Studies on model compounds as well as real biomass

  18. Electrochemical study on determination of diffusivity, activity and solubility of oxygen in liquid bismuth

    Energy Technology Data Exchange (ETDEWEB)

    Ganesan, Rajesh [Liquid Metals and Structural Chemistry Division, Chemistry Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India); Gnanasekaran, T. [Liquid Metals and Structural Chemistry Division, Chemistry Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India)]. E-mail: gnani@igcar.ernet.in; Srinivasa, Raman S. [Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai 400 076 (India)

    2006-06-15

    Diffusivity of oxygen in liquid bismuth was measured by potentiostatic method and is given bylg(D{sub O}{sup Bi}/cm{sup 2}.s{sup -1})(+/-0.042)=-3.706-1377/(TK{sup -1})(804Activity of oxygen in bismuth was determined by coulometric titrations and using the measured data standard free energy of dissolution of oxygen in liquid bismuth was derived for the reaction:1/2O{sub 2}(g)=[O]{sub Bi}(at.%)and is given by{delta}G{sub O(Bi)}{sup o}/(J.g-atomO{sup -1})(+/-720)=-108784+20.356TK{sup -1}(753liquid bismuth was derived as a function of temperature and is given by the following expressions:lg(S/at%O)(+/-0.05)=-4476/TK{sup -1}+4.05(753liquid bismuth is compared with the literature data.

  19. Assessment of an active liquid cooling garment intended for use in a hot environment.

    Science.gov (United States)

    Bartkowiak, Grazyna; Dabrowska, Anna; Marszalek, Anna

    2017-01-01

    This paper discusses the construction of a designed active liquid cooling garment (LCG) that has been developed in order to reduce thermal discomfort of persons working in hot environments. It consists of clothing with a tube system distributing a cooling liquid, a sensor measuring the microclimate under the clothing, and a portable cooling unit with a module controlling the temperature of the cooling liquid depending on the microclimate temperature under the clothing. The LCG was validated through tests on volunteers in a climatic chamber at 30 °C, a relative humidity of 40%, and an air movement rate of 0.4 m/s. The obtained test results confirmed the beneficial effects of the cooling system used on mean weighted skin temperature, the physical parameters of the microclimate under the clothing, and the participants' subjective assessments, as well as confirmed that the functioning of the control system regulating liquid temperature in the LCG was correct. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. A Raman Spectroscopy and High-Speed Video Experimental Study: The Effect of Pressure on the Solid-Liquid Transformation Kinetics of N-octane

    Science.gov (United States)

    Liu, C.; Wang, D.

    2015-12-01

    Phase transitions of minerals and rocks in the interior of the Earth, especially at elevated pressures and temperatures, can make the crystal structures and state parameters obviously changed, so it is very important for the physical and chemical properties of these materials. It is known that the transformation between solid and liquid is relatively common in nature, such as the melting of ice and the crystallization of mineral or water. The kinetics relevant to these transformations might provide valuable information on the reaction rate and the reaction mechanism involving nucleation and growth. An in-situ transformation kinetic study of n-octane, which served as an example for this type of phase transition, has been carried out using a hydrothermal diamond anvil cell (HDAC) and high-speed video technique, and that the overall purpose of this study is to develop a comprehensive understanding of the reaction mechanism and the influence of pressure on the different transformation rates. At ambient temperature, the liquid-solid transformation of n-octane first took place with increasing pressure, and then the solid phase gradually transformed into the liquid phase when the sample was heated to a certain temperature. Upon the cooling of the system, the liquid-solid transformation occurred again. According to the established quantitative assessments of the transformation rates, pressure and temperature, it showed that there was a negative pressure dependence of the solid-liquid transformation rate. However, the elevation of pressure can accelerate the liquid-solid transformation rate. Based on the calculated activation energy values, an interfacial reaction and diffusion dominated the solid-liquid transformation, but the liquid-solid transformation was mainly controlled by diffusion. This experimental technique is a powerful and effective tool for the transformation kinetics study of n-octane, and the obtained results are of great significance to the kinetics study

  1. Miniaturization of High-Throughput Epigenetic Methyltransferase Assays with Acoustic Liquid Handling.

    Science.gov (United States)

    Edwards, Bonnie; Lesnick, John; Wang, Jing; Tang, Nga; Peters, Carl

    2016-02-01

    Epigenetics continues to emerge as an important target class for drug discovery and cancer research. As programs scale to evaluate many new targets related to epigenetic expression, new tools and techniques are required to enable efficient and reproducible high-throughput epigenetic screening. Assay miniaturization increases screening throughput and reduces operating costs. Echo liquid handlers can transfer compounds, samples, reagents, and beads in submicroliter volumes to high-density assay formats using only acoustic energy-no contact or tips required. This eliminates tip costs and reduces the risk of reagent carryover. In this study, we demonstrate the miniaturization of a methyltransferase assay using Echo liquid handlers and two different assay technologies: AlphaLISA from PerkinElmer and EPIgeneous HTRF from Cisbio. © 2015 Society for Laboratory Automation and Screening.

  2. On-chip nanofluidic integration of acoustic sensors towards high Q in liquid

    Science.gov (United States)

    Liang, Ji; Liu, Zifeng; Zhang, Hongxiang; Liu, Bohua; Zhang, Menglun; Zhang, Hao; Pang, Wei

    2017-11-01

    This paper reports an on-chip acoustic sensor comprising a piston-mode film bulk acoustic resonator and a monolithically integrated nanochannel. The resonator with the channel exhibits a resonance frequency (f) of 2.5 GHz and a quality (Q) factor of 436 in deionized water. The f × Q product is as high as 1.1 × 1012, which is the highest among all the acoustic wave sensors in the liquid phase. The sensor consumes 2 pl liquid volume and thus greatly saves the precious assays in biomedical testing. The Q factor is investigated, and real-time viscosity tests of glucose solution are demonstrated. The highly miniaturized and integrated sensor is capable to be arrayed with readout-circuitry, which opens an avenue for portable applications and lab-on-chip systems.

  3. Simultaneous high-performance liquid chromatographic determination of suxibuzone and its metabolites in plasma and urine.

    Science.gov (United States)

    Marunaka, T; Shibata, T; Minami, Y; Umeno, Y; Shindo, T

    1980-11-01

    A high-performance liquid chromatographic method is described for the simultaneous determination of the anti-inflammatory agent suxibuzone and its metabolites, 4-hydroxymethylphenylbutazone, phenylbutazone, oxyphenbutazone, and gamma-hydroxyphenylbutazone, in plasma and urine. Acidified plasma or urine is extracted with benzenecyclohexane (1:1). The organic extract is reduced to dryness and the resulting residue is redissolved in methanol. Aliquots of this solution are chromatographed on a reversed-phase column using a mobile phase of methanol--0.5 M KH2PO4 (linear gradient from 0 to 100% methanol at 8% min with a flow rate of 2.0 ml/min) on a high-performance liquid chromatograph equipped with a UV absorbance detector (254 nm). Detection is limited to 0.10 microgram/ml for suxibuzone and 4-hydroxymethylphenylbutazone and to 0.05 microgram/ml for the other metabolites.

  4. High effectiveness liquid droplet/gas heat exchanger for space power applications

    Science.gov (United States)

    Bruckner, A. P.; Mattick, A. T.

    1983-01-01

    A high-effectiveness liquid droplet/gas heat exchanger (LDHX) concept for thermal management in space is described. Heat is transferred by direct contact between fine droplets (approximately 100-300 microns in diameter) of a suitable low vapor pressure liquid and an inert working gas. Complete separation of the droplet and gas media in the zero-g environment is accomplished by configuring the LDHX as a vortex chamber.The large heat transfer area presented by the small droplets permits heat exchanger effectiveness of 0.9-0.95 in a compact, lightweight geometry which avoids many of the limitations of conventional plate and fin or tube and shell heat exchangers, such as their tendency toward single point failure. The application of the LDHX in a high temperature Brayton cycle is discussed to illustrate the performance and operational characteristics of this new heat exchanger concept.

  5. High-pressure liquid chromatography with direct injection of gas sample.

    Science.gov (United States)

    Astanin, Anton I; Baram, Grigory I

    2017-06-09

    The conventional method of using liquid chromatography to determine the composition of a gaseous mixture entails dissolving vapors in a suitable solvent, then obtaining a chromatograph of the resulting solution. We studied the direct introduction of a gaseous sample into a C18 reversed-phase column, followed by separation of the components by HPLC with UV detection. Since the chromatography was performed at high pressure, vapors readily dissolved in the eluent and the substances separated in the column as effectively as in liquid samples. Samples were injected into the column in two ways: a) through the valve without a flow stop; b) after stopping the flow and relieving all pressure. We showed that an injectable gas volume could reach 70% of column dead volume. When an injected gaseous sample volume was less than 10% of the column dead volume, the resulting peaks were symmetrical and the column efficiency was high. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Characterization and BMP Tests of Liquid Substrates for High-rate Anaerobic Digestion

    Directory of Open Access Journals (Sweden)

    M. Mainardis

    2018-01-01

    Full Text Available This work was focused on the physicochemical characterization and biochemical methane potential (BMP tests of some liquid organic substrates, to verify if they were suitable for undergoing a process of high-velocity anaerobic digestion. The selected substrates were: first and second cheese whey, organic fraction of municipal solid waste (OFMSW leachate, condensate water and slaughterhouse liquid waste. Firstly, a physicochemical characterization was performed, using traditional and macromolecular parameters; then, batch anaerobic tests were carried out, and some continuous tests were planned. The results revealed that all the analyzed substrates have a potential to be anaerobically treated. Valuable information about treatment rate for a high-velocity anaerobic digestion process was obtained. Start-up of a lab-scale UASB reactor, treating diluted cheese whey, was successfully achieved with good COD removal efficiency. These preliminary results are expected to be further investigated in a successive phase, where continuous tests will be conducted on condensate water and OFMSW leachate.

  7. Levitation Methods for Structural and Dynamical Studies of Liquids at High Temperatures

    Directory of Open Access Journals (Sweden)

    Holland-Moritz D.

    2011-05-01

    Full Text Available In recent years, levitation methods have been increasingly used to study the atomic structure and dynamics of high-temperature liquids, in particular metallic melts. These methods provide a containerless and, consequently, high-purity sample environment. No corrections for signals due to a crucible need to be made, and deep undercoolings of the liquid become possible, reducing the effect of thermal fluctuations. On the other hand, the sample position and, hence, the scattering geometry is not fixed and the free sample surface exhibits capillary waves. Nevertheless, the combination of levitation techniques with x-ray or neutron sources has proven to be possible and successfull. This paper reviews the progress made in this field during the last 10 years or so. It discusses the different levitation techniques: aerodynamic, electromagnetic, electrostatic, as well as the applied spectroscopic techniques: x-ray and neutron diffraction, x-ray absorption and quasi-elastic neutron diffraction. Some recent results are also highlighted.

  8. Highly sensitive and selective liquid crystal optical sensor for detection of ammonia.

    Science.gov (United States)

    Niu, Xiaofang; Zhong, Yuanbo; Chen, Rui; Wang, Fei; Luo, Dan

    2017-06-12

    Ammonia detection technologies are very important in environment monitoring. However, most existing technologies are complex and expensive, which limit the useful range of real-time application. Here, we propose a highly sensitive and selective optical sensor for detection of ammonia (NH3) based on liquid crystals (LCs). This optical sensor is realized through the competitive binding between ammonia and liquid crystals on chitosan-Cu2+ that decorated on glass substrate. We achieve a broad detection range of ammonia from 50 ppm to 1250 ppm, with a low detection limit of 16.6 ppm. This sensor is low-cost, simple, fast, and highly sensitive and selective for detection of ammonia. The proposal LC sensing method can be a sensitive detection platform for other molecule monitors such as proteins, DNAs and other heavy metal ions by modifying sensing molecules.

  9. Evaluation of dry feeding and liquid feeding to lactating sows under high temperature environment

    Directory of Open Access Journals (Sweden)

    J. S. Hong

    2016-10-01

    Full Text Available Abstract Background Liquid feeding system has been introduced to domestic swine farms, but negative cognition about liquid feeding system has been remained for feed waste decay related with poor management and microbial contamination. For these reasons, this study was conducted to evaluate the effects of feeding method in lactating sows. Methods A total of 30 mixed-parity (average 4.13 lactating sows (Yorkshire × Landrace with an initial BW of 218.8 ± 19.5kg was used in a 3 week trial. Sows were allotted to 1 of 2 treatments in a completely randomized design by their body weight, backfat thickness, parity and alive litter weight. One of treatments was dry feeding and the other was liquid feeding (water to feed ratio, 1:1. Experimental diets contained 3265 kcal ME/kg, 12.6 % CP, 5.76 % EE, 1.09 % total lysine, 0.25 % total methionine, as fed basis. Results Dry feeding treatment had high body weight loss rather than liquid feeding treatment (P = 0.04. Dry feeding treatment had tendency to increase litter weight at 21d of lactation (P = 0.06 and litter weight gain (P = 0.04 during lactation period (0–3 week. Sows fed dry feeding method made milk containing high content of casein and total solid rather than sows fed liquid feeding method (P = 0.04. In addition, dry feeding treatment had tendency to higher content of milk fat, protein and solid not fat on 21d of lactation (P = 0.07. Sows fed dry feeding type also showed higher milk energy content in milk of 21d lactation (P = 0.05. Furthermore, liquid feeding treatment showed high occurrence in feed waste during lactation period (P < 0.01. Conclusion Dry feeding method was more suitable feeding method to lactating sows under high temperature environment like lactating barn.

  10. High Fidelity Tool for Turbulent Combustion in Liquid Launch Propulsion Systems Based on Spray-Flamelet Methodology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation proposed here is a high-performance, high-fidelity simulation capability for simulating liquid rocket spray combustion based on a novel spray-flamelet...

  11. Trends in emerging and high risk activities

    Science.gov (United States)

    Robert C. White; Richard Schreyer; Kent Downing

    1980-01-01

    Newly emerging and high risk activities have increased markedly in the last generation, yet little is known about trends in participation. Factors such as technological innovation and creative experimentation with traditional activities appear to play a major role in the development of new activities. Christy's criteria for mass demand in recreation are used to...

  12. 3D Printing of Highly Conductive Nanocomposites for the Functional Optimization of Liquid Sensors.

    Science.gov (United States)

    Chizari, Kambiz; Daoud, Mohamed Amine; Ravindran, Anil Raj; Therriault, Daniel

    2016-11-01

    The utilization of 3D printing of highly conductive (σ ≈ 2350 S m-1 ) polymer composite structures for the functional optimization of scaffold-shaped liquid sensors is demonstrated. This study can open the pathway of the application of 3D printing of conductive composites for optimization of structures useful for various applications such as smart sensors in textile or in the field of electronics. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Determination of food preservatives and saccharin by high-performance liquid chromatography.

    Science.gov (United States)

    Leuenberger, U; Gauch, R; Baumgartner, E

    1979-05-21

    The quantitative analysis of benzoic and sorbic acid, methyl, ethyl and propyl esters of p-hydroxybenzoic acid and saccharin in foodstuffs is described. These compounds are quantitatively extracted with disposable clean-up columns packed with Extrelut and simultaneously determined by high-performance liquid chromatography on reversed-phase columns. Complicated matrices such as cheese, cake, ketchup and chocolate were tested and recoveries were generally better than 95% in the concentration ranges normally used in the food industry.

  14. Simple high-performance liquid chromatographic method to analyse megazol in human and rat plasma

    OpenAIRE

    Enanga, Bertin; Labat, Christian; Boudra, Hamid; Chauvière, G; Keita, M; Bouteille, B.; Dumas, Michel; Houin, Georges

    1997-01-01

    A simple and sensitive high-performance liquid chromatographic method has been developed to measure megazol in human plasma. The method was optimized and validated according to the Washington Concensus Conference on the Validation of Analytical Methods (V.P. Shah et al., Eur. J. Drug Metab. Pharmacokinet., 15 (1991) 249). The criteria of complete validation were specificity, linearity, precision, analytical recovery, dilution and stability. It involved extraction of the plasma with dichlorome...

  15. Serum Protein Profile Study of Clinical Samples Using High Performance Liquid Chromatography-Laser Induced Fluorescence

    DEFF Research Database (Denmark)

    Karemore, Gopal Raghunath; Ukendt, Sujatha; Rai, Lavanya

    2009-01-01

    The serum protein profiles of normal subjects, patients diagnosed with cervical cancer, and oral cancer were recorded using High Performance Liquid Chromatography combined with Laser Induced Fluorescence detection (HPLC-LIF). Serum protein profiles of the above three classes were tested...... for establishing the ability of HPLC-LIF protein profiling technique for discrimination, using hard clustering and Fuzzy clustering methods. The clustering algorithms have quite successfully classified the profiles as belonging to normal, cancer of cervix, and oral cancer conditions....

  16. High resolution of racemic phenylalanine with dication imidazolium-based chiral ionic liquids in a solid-liquid two-phase system.

    Science.gov (United States)

    Huang, Xiaoxia; Wu, Haoran; Wang, Zhixia; Luo, Yingjie; Song, Hang

    2017-01-06

    A novel solid-liquid two-phase system was developed for the chiral separation of racemic phenylalanine with new dication imidazolium-based chiral ionic liquids. Preliminary experiments showed distinct enantioselectivity in amino acid extraction with the novel solid-liquid two-phase system, more L-enantiomer of amino acid cooperatively interacted with ionic liquids and copper ions to be the solid phase. Various factors, including the alkyl chain length of cations of ionic liquids, the amount of copper acetate, the ratio of n(ILs)/n(Cu2+), the amount of water and racemic phenylalanine, the resolution time together with the resolution temperature, were systematically investigated for their influence on resolution efficiency. The results showed that, under a certain condition, the enantiomeric excess value and the yield of phenylalanine in liquid phase (mainly containing D-enantiomer) were 67.8% and 96.5%, the enantiomeric excess value and the yield of phenylalanine in solid phase (mainly containing L-enantiomer) were 99.2% and 85.2%. Finally, 2D NMR technology, infrared spectroscopy and molecular simulation method were used to study the interaction mechanism. The results indicated that L-enantiomer of phenylalanine interacts more strongly with chiral ILs and Cu2+. The novel system has characteristics of free-organic solvent, simple operation, fast separation process and very high resolution efficiency for racemic phenylalanine. This work could provide a new and alternative resolution approach for other chiral separations. Copyright © 2016. Published by Elsevier B.V.

  17. X-ray reflectivity measurements of liquid/solid interfaces under high hydrostatic pressure conditions.

    Science.gov (United States)

    Wirkert, Florian J; Paulus, Michael; Nase, Julia; Möller, Johannes; Kujawski, Simon; Sternemann, Christian; Tolan, Metin

    2014-01-01

    A high-pressure cell for in situ X-ray reflectivity measurements of liquid/solid interfaces at hydrostatic pressures up to 500 MPa (5 kbar), a pressure regime that is particularly important for the study of protein unfolding, is presented. The original set-up of this hydrostatic high-pressure cell is discussed and its unique properties are demonstrated by the investigation of pressure-induced adsorption of the protein lysozyme onto hydrophobic silicon wafers. The presented results emphasize the enormous potential of X-ray reflectivity studies under high hydrostatic pressure conditions for the in situ investigation of adsorption phenomena in biological systems.

  18. High-resolution tracking using large capillary bundles filled with liquid scintillator

    CERN Document Server

    Annis, P; Benussi, L; Bruski, N; Buontempo, S; Currat, C; D'Ambrosio, N; Van Dantzig, R; Dupraz, J P; Ereditato, A; Fabre, Jean-Paul; Fanti, V; Feyt, J; Frekers, D; Frenkel, A; Galeazzi, F; Garufi, F; Goldberg, J; Golovkin, S V; Gorin, A M; Grégoire, G; Harrison, K; Höpfner, K; Holtz, K; Konijn, J; Kozarenko, E N; Kreslo, I E; Kushnirenko, A E; Liberti, B; Martellotti, G; Medvedkov, A M; Michel, L; Migliozzi, P; Mommaert, C; Mondardini, M R; Panman, J; Penso, G; Petukhov, Yu P; Rondeshagen, D; Siegmund, W P; Tyukov, V E; Van Beek, G; Vasilchenko, V G; Vilain, P; Visschers, J L; Wilquet, G; Winter, Klaus; Wolff, T; Wörtche, H J; Wong, H; Zimyn, K V

    2000-01-01

    We have developed large high-resolution tracking detectors based on glass capillaries filled with organic liquid scintillator of high refractive index. These liquid-core scintillating optical fibres act simultaneously as detectors of charged particles and as image guides. Track images projected onto the readout end of a capillary bundle are visualized by an optoelectronic chain consisting of a set of image-intensifier tubes followed by a photosensitive CCD or by an EBCCD camera. Two prototype detectors, each composed of \\hbox{$\\approx 10^6$} capillaries with \\hbox{20$-$25 $\\mu$m} diameter and \\hbox{0.9$-$1.8 m} length, have been tested, and a spatial resolution of the order of \\hbox{20$-$40 $\\mu$m} has been attained. A high scintillation efficiency and a large light-attenuation length, in excess of 3 m, was achieved through special purification of the liquid scintillator. Along the tracks of minimum-ionizing particles, the hit densities obtained were $\\sim$ 8 hits/mm at the readout window, and \\hbox{$\\sim$ 3 ...

  19. A reexamination of the relationship between volatility, liquidity and trading activity

    Directory of Open Access Journals (Sweden)

    Khine Kyaw

    2013-03-01

    Full Text Available Este trabajo investiga si la relación entre actividad negociadora en el mercado de acciones, la liquidez del mercado y la volatilidad a nivel de cartera, es similar a dicha relación a nivel deacciones individuales. Para las carteras de empresas de mayor tamaño, la mayor actividad negociadora está relacionada con mayor liquidez y más volatilidad. Sin embargo, a pesar de quela relación volatilidad-liquidez es la misma para las carteras de acciones pequeñas, encontramos que la mayor actividad negociadora está negativamente asociada con la liquidez para estaagrupación. Este contraste en las relaciones está causado por las interrelaciones dinámicas entre las tres variables y una vez que se controla por esas interrelaciones, dicho contraste en losresultados desparece. Estos hallazgos contribuyen al debate sobre el comportamiento del mercado, que ha adquirido un renovado interés en los últimos años.We investigate whether the relationship between equity trading activity, market liquidity and return volatility at the portfolio level is similar to the relationship at the individual security level. For the very largest firm-size portfolio, higher trading activity is positively associated with greater liquidity and more volatile returns. However, despite the volatility-liquidity relationship being the same for smaller equity portfolios, we find that higher trading activity is negatively associated with liquidity for this grouping. These contrasting relationships are shown to be caused by the interdynamics between all three variables and once we control for these interrelationships, the contrasting results disappear. The findings contribute to the debate on market behaviour that has taken on renewed vigour in recent years.

  20. Resonant x-ray emission spectroscopy of liquid water: novel instrumentation, high resolution, and the"map" approach

    Energy Technology Data Exchange (ETDEWEB)

    Weinhardt, L.; Fuchs, O.; Blum, M.; B& #228; r, M.; Weigand, M.; Denlinger, J.D.; Zubavichus, Y.; Zharnikov, M.; Grunze, M.; Heske, C.; Umbach, E.

    2008-06-17

    Techniques to study the electronic structure of liquids are rare. Most recently, resonant x-ray emission spectroscopy (XES) has been shown to be an extremely versatile spectroscopy to study both occupied and unoccupied electronic states for liquids in thermodynamic equilibrium. However, XES requires high-brilliance soft x-ray synchrotron radiation and poses significant technical challenges to maintain a liquid sample in an ultra-high vacuum environment. Our group has therefore developed and constructed a novel experimental setup for the study of liquids, with the long-term goal of investigating the electronic structure of biological systems in aqueous environments. We have developed a flow-through liquid cell in which the liquid is separated from vacuum by a thin Si3N4 or SiC window and which allows a precise control of temperature. This approach has significant advantages compared to static liquids cells used in the past. Furthermore, we have designed a dedicated high-transmission, high-resolution soft x-ray spectrometer. The high transmission makes it possible to measure complete resonant XES"maps" in less than an hour, giving unprecedented detailed insight into the electronic structure of the investigated sample. Using this new equipment we have investigated the electronic structure of liquid water. Furthermore, our XES spectra and maps give information about ultra-fast dissociation on the timescale of the O 1s core hole lifetime, which is strongly affected by the initial state hydrogen bonding configuration.

  1. Conversion of waste polypropylene to liquid fuel using acid-activated kaolin.

    Science.gov (United States)

    Panda, Achyut K; Singh, R K

    2014-10-01

    Waste polypropylene was subjected to thermal degradation in the presence of kaolin and acid-treated kaolin, with different catalyst-to-plastics ratios, in a semi-batch reactor at a temperature range of 400-550°C to obtain optimized process conditions for the production of liquid fuels. The effects of process temperature, catalyst and feed composition on yield and quality of the oil were determined. For a thermal decomposition reaction at up to 450°C, the major product is volatile oil; and the major products at a higher temperature (475-550°C) are either viscous liquid or wax. The highest yield of condensed fraction in the thermal reaction is 82.85% by weight at 500°C. Use of kaolin and acid-treated kaolin as a catalyst decreased the reaction time and increased the yield of liquid fraction. The major product of catalysed degradation at all temperatures is highly volatile liquid oil. The maximum oil yield using kaolin and acid-treated kaolin is 87.5% and 92%, respectively, at 500°C. The oil obtained was characterized using GC-MS for its composition and different fuel properties by IS methods. © The Author(s) 2014.

  2. Highly effective ionic liquids for biodiesel production from waste vegetable oils

    Directory of Open Access Journals (Sweden)

    Fathy A. Yassin

    2015-03-01

    Full Text Available As conventional energy sources deplete, the need for developing alternative energy resources which are environment friendly becomes more imperative. Vegetable oils are attracting increased interest in this purpose. The methanolysis of vegetable oil to produce a fatty acid methyl ester (FAME, i.e., biodiesel fuel was catalyzed by commercial ionic liquid and its chloride modification. The imidazolium chloride ionic liquid was frequently chosen for the synthesis of biodiesel. The dual-functionalized’ ionic liquid is prepared by a direct combination reaction between imidazolium cation and various metal chlorides such as CoCl2, CuCl2, NiCl2, FeCl3 and AlCl3. Imidazolium tetrachloroferrate was proved to be a selective catalyst for the methanolysis reaction at a yield of 97% when used at 1:10, catalyst: oil ratio for 8 h at 55 °C. Operational simplicity, reusability of the used catalyst for 8 times at least, high yields and no saponification are the key features of this methodology. The dynamic viscosity and density of the upgraded vegetable oil decreased from 32.1 cP and 0.9227 g/cm3 to 10.2 cP and 0.9044 g/cm3 respectively, compared to those of the base vegetable oil. The objective of this study was the synthesis and characterization of biodiesel using commercial ionic liquid and its chloride modification. The ionic liquid catalysts were characterized using FTIR, Raman spectroscopy, DSC, TG and UV.

  3. High-power liquid-lithium jet target for neutron production.

    Science.gov (United States)

    Halfon, S; Arenshtam, A; Kijel, D; Paul, M; Berkovits, D; Eliyahu, I; Feinberg, G; Friedman, M; Hazenshprung, N; Mardor, I; Nagler, A; Shimel, G; Tessler, M; Silverman, I

    2013-12-01

    A compact liquid-lithium target (LiLiT) was built and tested with a high-power electron gun at the Soreq Nuclear Research Center. The lithium target, to be bombarded by the high-intensity proton beam of the Soreq Applied Research Accelerator Facility (SARAF), will constitute an intense source of neutrons produced by the (7)Li(p,n)(7)Be reaction for nuclear astrophysics research and as a pilot setup for accelerator-based Boron Neutron Capture Therapy. The liquid-lithium jet target acts both as neutron-producing target and beam dump by removing the beam thermal power (>5 kW, >1 MW/cm(3)) with fast transport. The target was designed based on a thermal model, accompanied by a detailed calculation of the (7)Li(p,n) neutron yield, energy distribution, and angular distribution. Liquid lithium is circulated through the target loop at ~200 °C and generates a stable 1.5 mm-thick film flowing at a velocity up to 7 m/s onto a concave supporting wall. Electron beam irradiation demonstrated that the liquid-lithium target can dissipate electron power areal densities of >4 kW/cm(2) and volume power density of ~2 MW/cm(3) at a lithium flow of ~4 m/s while maintaining stable temperature and vacuum conditions. The LiLiT setup is presently in online commissioning stage for high-intensity proton beam irradiation (1.91-2.5 MeV, 1-2 mA) at SARAF.

  4. High-power liquid-lithium jet target for neutron production

    Energy Technology Data Exchange (ETDEWEB)

    Halfon, S.; Feinberg, G. [Soreq NRC, Yavne 81800 (Israel); Racah Institute of Physics, Hebrew University, Jerusalem 91904 (Israel); Arenshtam, A.; Kijel, D.; Berkovits, D.; Eliyahu, I.; Hazenshprung, N.; Mardor, I.; Nagler, A.; Shimel, G.; Silverman, I. [Soreq NRC, Yavne 81800 (Israel); Paul, M.; Friedman, M.; Tessler, M. [Racah Institute of Physics, Hebrew University, Jerusalem 91904 (Israel)

    2013-12-15

    A compact liquid-lithium target (LiLiT) was built and tested with a high-power electron gun at the Soreq Nuclear Research Center. The lithium target, to be bombarded by the high-intensity proton beam of the Soreq Applied Research Accelerator Facility (SARAF), will constitute an intense source of neutrons produced by the {sup 7}Li(p,n){sup 7}Be reaction for nuclear astrophysics research and as a pilot setup for accelerator-based Boron Neutron Capture Therapy. The liquid-lithium jet target acts both as neutron-producing target and beam dump by removing the beam thermal power (>5 kW, >1 MW/cm{sup 3}) with fast transport. The target was designed based on a thermal model, accompanied by a detailed calculation of the {sup 7}Li(p,n) neutron yield, energy distribution, and angular distribution. Liquid lithium is circulated through the target loop at ∼200 °C and generates a stable 1.5 mm-thick film flowing at a velocity up to 7 m/s onto a concave supporting wall. Electron beam irradiation demonstrated that the liquid-lithium target can dissipate electron power areal densities of >4 kW/cm{sup 2} and volume power density of ∼2 MW/cm{sup 3} at a lithium flow of ∼4 m/s while maintaining stable temperature and vacuum conditions. The LiLiT setup is presently in online commissioning stage for high-intensity proton beam irradiation (1.91–2.5 MeV, 1–2 mA) at SARAF.

  5. Ionic liquid salt bridge based on tributyl(2-methoxyethyl)phosphonium bis(pentafluoroethanesulfonyl)amide for stable liquid junction potentials in highly diluted aqueous electrolyte solutions.

    Science.gov (United States)

    Sakaida, Hideaki; Kitazumi, Yuki; Kakiuchi, Takashi

    2010-12-15

    A moderately hydrophobic ionic liquid, tributyl(2-methoxyethyl)phosphonium bis(pentafluoroethanesulfonyl)amide ([TBMOEP(+)][C(2)C(2)N(-)]), shows a very stable liquid junction potential upon contact with an aqueous solution whose ionic strength is as low as 1 μ mol dm(-3). The stability with the maximum excursion of the potential within ± 0.5 mV for 30 min is very promising for accurate determination of pH and other single ion activities potentiometrically. Copyright © 2010 Elsevier B.V. All rights reserved.

  6. Quantitative determination of triterpenoid glycosides in Fatsia japonica Decne. & Planch. using high performance liquid chromatography.

    Science.gov (United States)

    Ye, Xuewei; Yu, Siran; Lian, Xiao-Yuan; Zhang, Zhizhen

    2014-01-01

    Fatsia japonica Decne. & Planch. is a triterpenoid glycoside-rich herb with anti-inflammatory activity for the treatment of rheumatoid arthritis. A method for quantitative analysis of the complex triterpenoid glycosides in this medicinal plant has not been established so far. In this study, a high performance liquid chromatography (HPLC) method was developed for simultaneous qualification of 11 glycosides in F. japonica. The analysis was performed on an ODS-2 Hypersil column (250mm×4.6mm, 5μm) with a binary gradient mobile phase of water and acetonitrile. The established HPLC method was validated in terms of linearity, sensitivity, stability, precision, accuracy, and recovery. Results showed that this method had good linearity with R(2) at 0.99992-0.99999 in the test range of 0.04-9.00μg/μL. The limit of detection (LOD) and limit of quantification (LOQ) for the standard compounds were 0.013-0.020μg/μL and 0.040-0.060μg/μL. The relative standard deviations (RSDs%) of run variations were 0.83-1.40% for intra-day and 0.84-3.59% for inter-day. The analyzed compounds in the samples were stable for at least 36h, and the spike recoveries of the detected glycosides were 99.67-103.11%. The developed HPLC method was successfully applied for the measurements of the contents of 11 triterpenoid glycoside in different parts of F. japonica. Taken together, the HPLC method newly developed in this study could be used for qualitative and quantitative analysis of the bioactive triterpenoid glycosides in F. japonica and its products. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Synthesis of Mesoporous Carbons from Rice Husk for Supercapacitors with High Energy Density in Ionic Liquid Electrolytes.

    Science.gov (United States)

    He, Xiaojun; Zhang, Hebao; Xie, Kang; Xia, Youyi; Zhao, Zhigang; Wang, Xiaoting

    2016-03-01

    High-performance mesoporous carbons (MCs) for supercapacitors were made from rice husk by one-step microwave-assisted ZnCl2 activation. The microstructures of MCs as-made were characterized by field emission scanning electron microscopy and transmission electron microscopy. The pore structure parameters of MCs were obtained by N2 adsorption technique. The electrochemical properties of MC electrodes were studied by constant current charge-discharge, cyclic voltammetry and electrochemical impedance spectroscopy in different electrolytes. The results showed that the specific surface area of MC4 made at the ZnCl2/rice husk mass of 4:1 reached 1737 m2 g(-1). The specific capacitance and energy density of the electrodes fabricated from the mixture of MC4 and microporous carbon increased with the mass percentage of MC4, reaching 157 F g(-1) and 84 Wh kg(-1) at 0.05 A g(-1), and showed good cycle stability in 1-butyl-3-methylimidazolium hexafluorophosphate electrolyte. Compared to the often-used aqueous and organic electrolytes, MC4 capacitor exhibited extremely high energy density in ionic liquid electrolyte, remaining at 28 Wh kg(-1) at 1684 W kg(-1). This work paves a new way to produce cost-effective MCs from biomass for supercapacitors with extremely high energy density in ionic liquid electrolytes.

  8. A simple dual online ultra-high pressure liquid chromatography system (sDO-UHPLC) for high throughput proteome analysis.

    Science.gov (United States)

    Lee, Hangyeore; Mun, Dong-Gi; Bae, Jingi; Kim, Hokeun; Oh, Se Yeon; Park, Young Soo; Lee, Jae-Hyuk; Lee, Sang-Won

    2015-08-21

    We report a new and simple design of a fully automated dual-online ultra-high pressure liquid chromatography system. The system employs only two nano-volume switching valves (a two-position four port valve and a two-position ten port valve) that direct solvent flows from two binary nano-pumps for parallel operation of two analytical columns and two solid phase extraction (SPE) columns. Despite the simple design, the sDO-UHPLC offers many advantageous features that include high duty cycle, back flushing sample injection for fast and narrow zone sample injection, online desalting, high separation resolution and high intra/inter-column reproducibility. This system was applied to analyze proteome samples not only in high throughput deep proteome profiling experiments but also in high throughput MRM experiments.

  9. Janus Reactors with Highly Efficient Enzymatic CO2Nanocascade at Air-Liquid Interface.

    Science.gov (United States)

    Gao, Song; Mohammad, Munirah; Yang, Hao-Cheng; Xu, Jia; Liang, Kang; Hou, Jingwei; Chen, Vicki

    2017-12-13

    Though enzymatic cascade reactors have been the subject of intense research over the past few years, their application is still limited by the complicated fabrication protocols, unsatisfactory stability and lack of effective reactor designs. In addition, the spatial positioning of the cascade reactor has so far not been investigated, which is of significant importance for biphase catalytic reaction systems. Inspired by the Janus properties of the lipid cellular membrane, here we show a highly efficient Janus gas-liquid reactor for CO 2 hydration and conversion. Within the Janus reactor, nanocascades containing the nanoscale compartmentalized carbonic anhydrase and formic dehydrogenase were positioned at a well-defined gas-liquid interface, with a high substrate concentration gradient. The Janus reactor exhibited 2.5 times higher CO 2 hydration efficiency compared with the conventional gas-liquid contactor with pristine membranes, and the formic acid conversion rate can reach approximately 90%. Through this work, we provide evidence that the spatial arrangement of the nanocascade is also crucial to efficient reactions, and the Janus reactor can be a promising candidate for the biphase catalytic reactions in environmental, biological and energy aspects.

  10. Experimental technique for observing free oscillation of a spherical gas bubble in highly viscous liquids.

    Science.gov (United States)

    Nakajima, Takehiro; Ando, Keita

    2015-11-01

    An experimental technique is developed to observe free oscillations of a spherical gas bubble in highly viscous liquids. It is demonstrated that focusing a nanosecond laser pulse of wavelength 532 nm and energy up to 1.5 mJ leads to the formation of a spherical gaseous bubble, not a vaporous bubble (quickly condensed back to the liquid), whose equilibrium radius is up to 200 microns in glycerin saturated with gases at room temperature. The subsequent free oscillations of the spherical gas bubble is visualized using a high-speed camera. Since the oscillation periods are short enough to ignore bubble translation under gravity and mass transfer out of the bubble, the observed bubble dynamics can be compared to nonlinear and linearized Reyleigh-Plesset-type calculations that account for heat conduction and acoustic radiation as well as the liquid viscosity. In this presentation, we report on the measurements with varying the viscosity and comparisons to the theory to quantify damping mechanisms in the bubble dynamics.

  11. High-accuracy measurement of the emission spectrum of liquid xenon in the vacuum ultraviolet region

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, Keiko, E-mail: fujii-keiko-nv@ynu.jp [Faculty of Engineering, Yokohama National University, Yokohama, Kanagawa 240-8501 (Japan); Endo, Yuya; Torigoe, Yui; Nakamura, Shogo [Faculty of Engineering, Yokohama National University, Yokohama, Kanagawa 240-8501 (Japan); Haruyama, Tomiyoshi; Kasami, Katsuyu [High Energy Accelerator Research Organization (KEK), Tsukuba, Ibaraki 305-0801 (Japan); Mihara, Satoshi; Saito, Kiwamu; Sasaki, Shinichi [High Energy Accelerator Research Organization (KEK), Tsukuba, Ibaraki 305-0801 (Japan); The Graduate School of Advanced Studies, Hayama, Kanagawa 240-0193 (Japan); Tawara, Hiroko [High Energy Accelerator Research Organization (KEK), Tsukuba, Ibaraki 305-0801 (Japan)

    2015-09-21

    The emission spectrum of cryogenic liquid xenon in the vacuum ultraviolet region was measured by irradiating liquid xenon with gamma-rays from a radioactive source. To achieve a high signal-to-noise ratio, we employed coincident photon counting. Additionally, the charge of the photo-sensor signals was measured to estimate the number of detected photons accurately. In addition, proper corrections were incorporated for the wavelength; response functions of the apparatus obtained using a low-pressure mercury lamp, and photon detection efficiencies of the optical system were considered. The obtained emission spectrum is found to be in the shape of a Gaussian function, with the center at 57,199±34 (stat.)±33 (syst.) cm{sup −1} (174.8±0.1 (stat.)±0.1 (syst.) nm) and the full width at half maximum of 3328±72 (stat.)±65 (syst.) cm{sup −1} (10.2±0.2 (stat.)±0.2 (sys.) nm). These results are the most accurate values obtained in terms of the data acquisition method and the calibration for the experimental system and provide valuable information regarding the high-precision instruments that employ a liquid-xenon scintillator.

  12. Highly tilted liquid crystalline materials possessing a direct phase transition from antiferroelectric to isotropic phase

    Energy Technology Data Exchange (ETDEWEB)

    Milewska, K.; Drzewiński, W. [Institute of Chemistry, Military University of Technology, 00-908 Warsaw (Poland); Czerwiński, M., E-mail: mczerwinski@wat.edu.pl [Institute of Chemistry, Military University of Technology, 00-908 Warsaw (Poland); Dąbrowski, R. [Institute of Chemistry, Military University of Technology, 00-908 Warsaw (Poland); Piecek, W. [Institute of Applied Physics, Military University of Technology, 00-908 Warsaw (Poland)

    2016-03-01

    Pure compounds and multicomponent mixtures with a broad temperature range of high tilted liquid crystalline antiferroelectric phase and a direct phase transition from antiferroelectric to isotropic phase, were obtained. X-ray diffraction analysis confirms these kinds of materials form a high tilted anticlinic phase, with a fixed layer spacing and very weak dependency upon temperature, after the transition from the isotropic phase. Due to this, not only pure orthoconic antiferroelectric liquid crystals but also those with a moderate tilt should generate a good dark state. Furthermore, due to the increased potential for forming anticlinic forces, such materials could minimize a commonly observed asymmetry of a rise and fall switching times at a surface stabilized geometry. - Highlights: • The new class of liquid crystalline materials with the direct SmC{sub A}*. • Iso phase transition were obtained. • Materials possess the layer spacing fixed and very weak dependent upon temperature. • Smectic layers without shrinkage are observed. • A good dark state can be generate in SSAFLC.

  13. The EURISOL Multi Megawatt Target Station, a liquid metal target for a High Power spallation source.

    CERN Document Server

    Kharoua, C; Blumenfeld, L; Milenkovich, R; Wagner, W; Thomsen, K; Dementjevs, S; Platacis, E; Kravalis, K; Zik, A

    The European Isotope Separation On-Line Radioactive Ion Beam Facility (EURISOL) is set to be the ‘next-generation’ European Isotope Separation On-Line (ISOL) Radioactive Ion Beam (RIB) facility. It will extend and amplify current research in nuclear physics, nuclear astrophysics and fundamental interactions beyond the year 2013.In EURISOL, four target stations are foreseen, three direct targets of approximately 100 kW of beam power and one multi-MW liquid metal proton-to-neutron converter, all driven by a high-power particle accelerator. In the aforementioned multi-MW target assembly, high-intensity RIBs of neutron-rich isotopes will be obtained by inducing fission in several actinide targets surrounding a liquid metal spallation neutron source.This presentation summarises the work carried out for the Multi Megawatt target station of the EURISOL Design Study with particular attention to the coupled neutronic of the liquid converter and the overall performance of the facility, which will sustain fast neutr...

  14. Intact-protein trapping columns for proteomic analysis in capillary high-performance liquid chromatography.

    Science.gov (United States)

    Guan, Xia; Yan, Guoquan; Gao, Mingxia; Hong, Guangfeng; Deng, Chunhui; Zhang, Xiangmin

    2010-10-29

    A new type of monolithic trapping columns with high mechanical strength was prepared by thin-layer sol-gel coating method and applied to trapping intact proteins for on-line capillary liquid chromatography. Monolithic trapping columns were fabricated by entrapping C8 reversed-phase particles into the capillary columns through a sol-gel network, which was formed by hydrolysis and polycondensation of methyltriethoxysilane. Hundreds times of trapping/untrapping for intact proteins were carried out. The trapping columns showed long-term stability up to 300 bar. Recovery, loading capacity and reproducibility of trapping columns were evaluated using four proteins. The recovery of four protein mixtures for the C8 monolithic trapping columns was 99.3% on average. The loading capacity of 5 mm × 320 μm i.d. C8 trapping columns for the protein mixtures was 30 μg. Day-to-day relative standard deviation (RSD) values for recoveries of protein mixtures on the same C8 trapping column ranged from 2.34 to 5.87%, column-to-column RSD values were from 3.01 to 6.81%. The C8 trapping columns were used to trap normal mouse liver intact proteins in a capillary liquid chromatography system. Results demonstrated high efficiency of the monolithic trapping columns for trapping intact proteins for proteomic analysis in on-line capillary liquid chromatography system. Copyright © 2010 Elsevier B.V. All rights reserved.

  15. A novel concept for high conversion of coal to liquids. Final report, 1 September 1988--31 August 1992

    Energy Technology Data Exchange (ETDEWEB)

    Wiser, W.H.; Shabtai, J.

    1994-04-01

    A batch microreactor was designed and fabricated as a means of investigating maximum yields of liquids obtainable in very short reaction times of the order of a few seconds, and the maximum ratios of liquids/hydrocarbon (HC) gases obtainable under those conditions. A Wyodak sub-bituminous coal, crushed and sieved to {minus}200 mesh particle size, was used in the experiments, with a temperature of 500{degrees}C and a pressure of 1500 psi. The fine coal particles were fed dry to the reactor and heated to reaction temperature in times of one to two seconds. At a time of 3 seconds at reaction temperature, in a single pass a liquid yield of 60% by weight of the coal was obtained, accompanied by a ratio of liquids/(HC) gases of 30/1. When the unreacted solids were recycled to the reactor, and the results combined with those of the first pass, a liquid yield of 82% by weight of the coal was achieved, accompanied by a ratio of liquids/HC gases of 30/1. This ratio represents only about 3 wt percent HC gases, much lower that is produced in current advanced technologies, and represents a large saving in hydrogen consumption. A simulated distillation technique was applied to the liquids. The liquid product contained 86% by weight (of the liquids) total distillables (boiling point below 538{degrees}C), including 70% by weight of low-boiling fractions in the gasoline, kerosene and gas oil range (boiling point up to 325{degrees}C). The liquid product exhibited a H/C ratio of 1.5, which is considerably higher than observed in current advanced technologies for the primary liquids. Several catalysts were investigated. Iron catalysts, specifically ferric chloride hexahydrate and ferric sulfate pentahydrate, each produced these high conversions and high ratios of liquids/HC gases.

  16. [Isolation of toxic peptides from Amanita phalloides and their analysis using high-performance liquid chromatography].

    Science.gov (United States)

    Hampl, J

    1993-08-05

    The objective of the work is isolation of toxic peptides from Amanita phalloides--amatoxins (alfa-, beta-, gamma-amanitin) and phallotoxins (phalloidin, phallacidin, phallisin, phallisacin) by liquid chromatography on Sephadex LH-20 according to Yocum modification. Seven main toxins were isolated in centigram amounts. The purity of the toxins isolated was verified by the characteristics of their absorbance spectra, by thin layer chromatography (TLC) and high-performance liquid chromatography on reversed phase (RP-HPLC). The fraction of acid phallotoxins which appears homogenous in TLC and Sephadex LH-20 was separated into 5 substances (four of which are phallotoxins) by preparative RP-HPLC technique. The toxins isolated are sufficiently pure to be used as standards in HPLC.

  17. Determination of metal ions by high-performance liquid chromatographic separation of their hydroxamic acid chelates

    Energy Technology Data Exchange (ETDEWEB)

    Palmieri, M.D.; Fritz, J.S.

    1987-09-15

    Metal ions are determined by adding N-methylfurohydroxamic acid to an aqueous sample and then separating the metal chelates by direct injection onto a liquid chromatographic column. Separations on a C/sub 8/ silica column and a polystyrene-divinylbenzene column are compared, with better separations seen on the polymeric column. The complexes formed at low pH values are cationic and are separated by an ion pairing mechanism. Retention times and selectivity of the metal complexes can be varied by changing the pH. Several metal ions can be separated and quantified; separation conditions, linear calibration curve ranges, and detection limits are presented for Zr(IV), Hf(IV), Fe(III), Nb(V), Al(III), and Sb(III). Interferences due to the presence of other ions in solution are investigated. Finally, an antiperspirant sample is analyzed for zirconium by high-performance liquid chromatography.

  18. Separative determination of ascorbic acid and erythorbic acid by high-performance liquid chromatography.

    Science.gov (United States)

    Arakawa, N; Otsuka, M; Kurata, T; Inagaki, C

    1981-01-01

    High-performance liquid chromatography (HPLC) was applied to the determination of ascorbic acid (AsA) and erythorbic acid (ErA). The apparatus was a Shimadzu model LC-2P Liquid Chromatograph equipped with a UV detector set at 254 nm. The separation was achieved on a LiChrosorb-NH2 column which was pre-treated with 0.1 M ammonium monophosphate solution using a mixture of acetonitrile, acetic acid and water (87:2:11, v/v) as an eluant. The HPLC method has the following advantages: AsA and ErA are quantitated after being distinctly separated, analysis time per one sample is short, and AsA or ErA levels as low as 1.0 X 10(-2) microgram are detectable. Recovery experiments with dehydro-AsA and dehydro-ErA, involving reduction with H2S, give satisfactory results.

  19. Highly mobile gapless excitations in a two-dimensional candidate quantum spin liquid.

    Science.gov (United States)

    Yamashita, Minoru; Nakata, Norihito; Senshu, Yoshinori; Nagata, Masaki; Yamamoto, Hiroshi M; Kato, Reizo; Shibauchi, Takasada; Matsuda, Yuji

    2010-06-04

    The nature of quantum spin liquids, a novel state of matter where strong quantum fluctuations destroy the long-range magnetic order even at zero temperature, is a long-standing issue in physics. We measured the low-temperature thermal conductivity of the recently discovered quantum spin liquid candidate, the organic insulator EtMe3Sb[Pd(dmit)2]2. A sizable linear temperature dependence term is clearly resolved in the zero-temperature limit, indicating the presence of gapless excitations with an extremely long mean free path, analogous to excitations near the Fermi surface in pure metals. Its magnetic field dependence suggests a concomitant appearance of spin-gap-like excitations at low temperatures. These findings expose a highly unusual dichotomy that characterizes the low-energy physics of this quantum system.

  20. Super high precision 200 ppi liquid crystal display series; Chokoseido 200 ppi ekisho display series

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In mobile equipment, in demand is a high precision liquid crystal display (LCD) having the power of expression equivalent to printed materials like magazines because of the necessity of displaying a large amount of information on a easily potable small screen. In addition, with the spread and high-quality image of digital still cameras, it is strongly desired to display photographed digital image data in high quality. Toshiba Corp., by low temperature polysilicone (p-Si) technology, commercialized the liquid crystal display series of 200 ppi (pixels per inch) precision dealing with the rise of the high-precision high-image quality LCD market. The super high precision of 200 ppi enables the display of smooth beautiful animation comparable to printed sheets of magazines and photographs. The display series are suitable for the display of various information services such as electronic books and electronic photo-viewers including internet. The screen sizes lined up are No. 4 type VGA (640x480 pixels) of a small pocket notebook size and No. 6.3 type XGA (1,024x768 pixels) of a paperback size, with a larger screen to be furthered. (translated by NEDO)

  1. Towards High-Frequency Shape Memory Alloy Actuators Incorporating Liquid Metal Energy Circuits

    Science.gov (United States)

    Hartl, Darren; Mingear, Jacob; Bielefeldt, Brent; Rohmer, John; Zamarripa, Jessica; Elwany, Alaa

    2017-12-01

    Large shape memory alloy (SMA) actuators are currently limited to applications with low cyclic actuation frequency requirements due to their generally poor heat transfer rates. This limitation can be overcome through the use of distributed body heating methods such as induction heating or by accelerated cooling methods such as forced convection in internal cooling channels. In this work, a monolithic SMA beam actuator containing liquid gallium-indium alloy-filled channels is fabricated through additive manufacturing. These liquid metal channels enable a novel multi-physical thermal control system, allowing for increased heating and cooling rates to facilitate an increased cyclic actuation frequency. Liquid metal flowing in the channels performs the dual tasks of inductively heating the surrounding SMA material and then actively cooling the SMA via forced internal fluid convection. A coupled thermoelectric model, implemented in COMSOL, predicts a possible fivefold increase in the cyclic actuation frequency due to these increased thermal transfer rates when compared to conventional SMA forms having external heating coils and being externally cooled via forced convection. The first ever experimental prototype SMA actuator of this type is described and, even at much lower flow rates, is shown to exhibit a decrease in cooling time of 40.9%.

  2. Influence of fermentation liquid from waste activated sludge on anoxic/oxic- membrane bioreactor performance: Nitrogen removal, membrane fouling and microbial community.

    Science.gov (United States)

    Han, Xiaomeng; Zhou, Zhen; Mei, Xiaojie; Ma, Yan; Xie, Zhenfang

    2017-12-02

    In order to investigate effects of waste activated sludge (WAS) fermentation liquid on anoxic/oxic- membrane bioreactor (A/O-MBR), two A/O-MBRs with and without WAS fermentation liquid addition were operated in parallel. Results show that addition of WAS fermentation liquid clearly improved denitrification efficiency without deterioration of nitrification, while severe membrane fouling occurred. WAS fermentation liquid resulted in an elevated production of proteins and humic acids in bound extracellular polymeric substance (EPS) and release of organic matter with high MW fractions in soluble microbial product (SMP) and loosely bound EPS (LB-EPS). Measurement of deposition rate and fluid structure confirmed increased fouling potential of SMP and LB-EPS. γ-Proteobacteria and Ferruginibacter, which can secrete and export EPS, were also found to be abundant in the MBR with WAS fermentation liquid. It is implied that when WAS fermentation liquid was applied, some operational steps to control membrane fouling should be employed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Monitoring Ion Activities In and Around Cells Using Ion-Selective Liquid-Membrane Microelectrodes

    Directory of Open Access Journals (Sweden)

    Mark D. Parker

    2013-01-01

    Full Text Available Determining the effective concentration (i.e., activity of ions in and around living cells is important to our understanding of the contribution of those ions to cellular function. Moreover, monitoring changes in ion activities in and around cells is informative about the actions of the transporters and/or channels operating in the cell membrane. The activity of an ion can be measured using a glass microelectrode that includes in its tip a liquid-membrane doped with an ion-selective ionophore. Because these electrodes can be fabricated with tip diameters that are less than 1 μm, they can be used to impale single cells in order to monitor the activities of intracellular ions. This review summarizes the history, theory, and practice of ion-selective microelectrode use and brings together a number of classic and recent examples of their usefulness in the realm of physiological study.

  4. Measurement of Activity of Indium in Liquid Bi-In-Sn Alloys by EMF Method

    Science.gov (United States)

    Kumar, M. R.; Mohan, S.; Behera, C. K.

    2016-08-01

    The electrochemical technique based on a molten salt electrolyte galvanic cell has been used to measure the activity of indium in liquid Bi-In-Sn alloys in the temperature range of 723 K to 855 K along three ternary sections. The activity of tin in Bi-Sn binary alloys has also been measured by the same technique in the above temperature range. The activity of indium in Bi-In-Sn alloys shows negative deviation from Raoult's law for most of the compositions and slight positive deviations for a few indium-rich compositions. The ternary excess molar free energies have been calculated by Darken's treatment. Isoactivity curves at 813 K in the ternary Bi-In-Sn alloys were derived by combining the activity data of In-Sn and Bi-In alloys. The values of excess molar free energy obtained in this study are compared with those calculated from the Muggianu model at 813 K.

  5. Salting-out assisted liquid-liquid extraction with the aid of experimental design for determination of benzimidazole fungicides in high salinity samples by high-performance liquid chromatography.

    Science.gov (United States)

    Wen, Yingying; Li, Jinhua; Yang, Fangfang; Zhang, Weiwei; Li, Weiran; Liao, Chunyang; Chen, Lingxin

    2013-03-15

    A novel method for the simultaneous separation and determination of four benzimidazole fungicides (i.e., carbendazim, fuberidazole, thiophanate-methyl and thiophanate) in high salinity samples was developed by using salting-out assisted liquid-liquid extraction (SALLE) via water-miscible acetonitrile as the extractant coupled with high-performance liquid chromatography. Box-Behnken design and response surface were employed to assist the optimization of SALLE conditions, including volume of salting-out solvent, the pH of sample solution and salting-out solvent as variable factors. The optimal salting-out parameters were obtained as follows: 2 mL of acetonitrile was added to 2 mL of sample solution with pH=4 and then 2 mL salting-out solvent containing 5 mol L(-1) sodium chloride at a pH of 7 was added to the solution for extraction. This procedure afforded a convenient and cost-saving operation with good cleanup ability for the benzimidazole fungicides, such as good linear relationships (R>0.996) between peak area and concentration from 2.5 ng mL(-1) to 500 ng mL(-1), low limits of detection between 0.14 ng mL(-1) and 0.38 ng mL(-1) and the intra-day precisions of retention time below 1.0%. The method recoveries obtained at fortified three concentrations for three seawater samples ranged from 60.4% to 99.1%. The simple, rapid and eco-benign SALLE based method proved potentially applicable for trace benzimidazole fungicides analysis in high salinity samples. Copyright © 2012 Elsevier B.V. All rights reserved.

  6. Activity coefficients at infinite dilution for solutes in the trioctylmethylammonium bis(trifluoromethylsulfonyl)imide ionic liquid using gas-liquid chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Gwala, Nobuhle V. [Department of Chemistry, Durban University of Technology, P.O. Box 1334, Durban 4000 (South Africa); Deenadayalu, Nirmala, E-mail: NirmalaD@dut.ac.z [Department of Chemistry, Durban University of Technology, P.O. Box 1334, Durban 4000 (South Africa); Tumba, Kaniki; Ramjugernath, Deresh [Thermodynamics Research Unit, School of Chemical Engineering, University of KwaZulu-Natal, Howard College Campus, King George V Avenue, Durban 4001 (South Africa)

    2010-02-15

    The activity coefficient at infinite dilution (gamma{sub 13}{sup i}nfinity) for 30 solutes: alkanes, alkenes, cycloalkanes, alkynes, ketones, alcohols, and aromatic compounds was determined from gas-liquid chromatography (glc) measurements at three temperatures (303.15, 313.15, and 323.15) K. The ionic liquid: trioctylmethylammonium bis(trifluoromethylsulfonyl)imide, was used as the stationary phase. For each temperature, gamma{sub 13}{sup i}nfinity values were determined using two columns with different mass percent packing of the ionic liquid. The selectivity (S{sub 12}{sup i}nfinity) value was calculated from the gamma{sub 13}{sup i}nfinity to determine the suitability of the solvent as a potential entrainer for extractive distillation in the separation of an hexane/benzene mixture, indicative of a typical industrial separation problem for benchmarking purposes.

  7. Soy protein isolate inhibits hepatic tumor promotion in mice fed a high-fat liquid diet.

    Science.gov (United States)

    Mercer, Kelly E; Pulliam, Casey F; Pedersen, Kim B; Hennings, Leah; Ronis, Martin Jj

    2017-03-01

    Alcoholic and nonalcoholic fatty liver diseases are risk factors for development of hepatocellular carcinoma, but the underlying mechanisms are poorly understood. On the other hand, ingestion of soy-containing diets may oppose the development of certain cancers. We previously reported that replacing casein with a soy protein isolate reduced tumor promotion in the livers of mice with alcoholic liver disease after feeding a high fat ethanol liquid diet following initiation with diethylnitrosamine. Feeding soy protein isolate inhibited processes that may contribute to tumor promotion including inflammation, sphingolipid signaling, and Wnt/β-catenin signaling. We have extended these studies to characterize liver tumor promotion in a model of nonalcoholic fatty liver disease produced by chronic feeding of high-fat liquid diets in the absence of ethanol. Mice treated with diethylnitrosamine on postnatal day 14 were fed a high-fat liquid diet made with casein or SPI as the sole protein source for 16 weeks in adulthood. Relative to mice fed normal chow, a high fat/casein diet led to increased tumor promotion, hepatocyte proliferation, steatosis, and inflammation. Replacing casein with soy protein isolate counteracted these effects. The high fat diets also resulted in a general increase in transcripts for Wnt/β-catenin pathway components, which may be an important mechanism, whereby hepatic tumorigenesis is promoted. However, soy protein isolate did not block Wnt signaling in this nonalcoholic fatty liver disease model. We conclude that replacing casein with soy protein isolate blocks development of steatosis, inflammation, and tumor promotion in diethylnitrosamine-treated mice fed high fat diets. Impact statement The impact of dietary components on cancer is a topic of great interest for both the general public and the scientific community. Liver cancer is currently the second leading form of cancer deaths worldwide. Our study has addressed the effect of the protein

  8. Antifatigue Activity of Liquid Cultured Tricholoma matsutake Mycelium Partially via Regulation of Antioxidant Pathway in Mouse.

    Science.gov (United States)

    Li, Quan; Wang, Yanzhen; Cai, Guangsheng; Kong, Fange; Wang, Xiaohan; Liu, Yang; Yang, Chuanbin; Wang, Di; Teng, Lirong

    2015-01-01

    Tricholoma matsutake has been popular as food and biopharmaceutical materials in Asian countries for its various pharmacological activities. The present study aims to analyze the antifatigue effects on enhancing exercise performance of Tricholoma matsutake fruit body (ABM) and liquid cultured mycelia (TM) in mouse model. Two-week Tricholoma matsutake treatment significantly enhances the exercise performance in weight-loaded swimming, rotating rod, and forced running test. In TM- and ABM-treated mice, some factors were observed at 60 min after swimming compared with nontreated mice, such as the increased levels of adenosine triphosphate (ATP), antioxidative enzymes, and glycogen and the reduced levels of malondialdehyde and reactive oxygen species in muscle, liver, and/or serum. Further data obtained from western blot show that CM and ABM have strongly enhanced the activation of 5'-AMP-activated protein kinase (AMPK), and the expressions of peroxisome proliferator have activated receptor γ coactivator-1α (PGC-1α) and phosphofructokinase-1 (PFK-1) in liver. Our data suggest that both Tricholoma matsutake fruit body and liquid cultured mycelia possess antifatigue effects related to AMPK-linked antioxidative pathway. The information uncovered in our study may serve as a valuable resource for further identification and provide experimental evidence for clinical trials of Tricholoma matsutake as an effective agent against fatigue related diseases.

  9. Antifatigue Activity of Liquid Cultured Tricholoma matsutake Mycelium Partially via Regulation of Antioxidant Pathway in Mouse

    Directory of Open Access Journals (Sweden)

    Quan Li

    2015-01-01

    Full Text Available Tricholoma matsutake has been popular as food and biopharmaceutical materials in Asian countries for its various pharmacological activities. The present study aims to analyze the antifatigue effects on enhancing exercise performance of Tricholoma matsutake fruit body (ABM and liquid cultured mycelia (TM in mouse model. Two-week Tricholoma matsutake treatment significantly enhances the exercise performance in weight-loaded swimming, rotating rod, and forced running test. In TM- and ABM-treated mice, some factors were observed at 60 min after swimming compared with nontreated mice, such as the increased levels of adenosine triphosphate (ATP, antioxidative enzymes, and glycogen and the reduced levels of malondialdehyde and reactive oxygen species in muscle, liver, and/or serum. Further data obtained from western blot show that CM and ABM have strongly enhanced the activation of 5′-AMP-activated protein kinase (AMPK, and the expressions of peroxisome proliferator have activated receptor γ coactivator-1α (PGC-1α and phosphofructokinase-1 (PFK-1 in liver. Our data suggest that both Tricholoma matsutake fruit body and liquid cultured mycelia possess antifatigue effects related to AMPK-linked antioxidative pathway. The information uncovered in our study may serve as a valuable resource for further identification and provide experimental evidence for clinical trials of Tricholoma matsutake as an effective agent against fatigue related diseases.

  10. Experimental determination of oxygen diffusion in liquid iron at high pressure

    Science.gov (United States)

    Posner, Esther S.; Rubie, David C.; Frost, Daniel J.; Steinle-Neumann, Gerd

    2017-04-01

    Oxygen diffusion experiments in liquid iron have been performed at 3-18 GPa and 1975-2643 K using a multi-anvil apparatus. Diffusion couples consisted of a pure iron rod and a sintered disk of Fe0.85O0.15 placed end-to-end in a vertical orientation. Images and chemical spot analyses were acquired along the full length of the quenched sample on lines perpendicular to the diffusion interface. Exsolution features that formed during quenching consist mostly of spherical oxide blobs of at least two size populations, as well as feathery dendritic textures in more oxygen-rich regions near the top of the samples. Diffusion during heating (i.e. prior to reaching the peak annealing temperature, Tf) is treated numerically to refine Arrhenian parameters from simultaneous least-squares fits to several concentration profiles obtained from experiments at constant pressure and variable Tf. Diffusion coefficients range from ∼ 6 ×10-9 to ∼ 2 ×10-8 m2s-1 over the P-T range of the study, with activation enthalpies of less than 100 kJ mol-1. We find a very weak effect of pressure on oxygen diffusion with an activation volume of 0.1 ± 0.1 cm3mol-1, in agreement with computational studies performed above 100 GPa. Arrhenian extrapolation of diffusion coefficients for oxygen to P-T conditions of the Earth's outer core yields faster average diffusion rates (∼ 3 ×10-8 m2s-1) than for Si or Fe in silicon-rich liquid iron alloys or pure liquid iron (∼ 5 ×10-9 m2s-1) reported previously. Oxygen diffusion data are used to constrain the maximum size of descending liquid metal droplets in a magma ocean that is required for chemical equilibration to be achieved. Our results indicate that if the Earth's core composition is representative of equilibrium chemical exchange with a silicate magma ocean, then it could only have been accomplished by large-scale break-up of impactor cores to liquid iron droplet sizes no larger than a few tens of centimeters.

  11. High-performance liquid chromatography analysis of black currant (Ribes nigrum L.) fruit phenolics grown either conventionally or organically.

    Science.gov (United States)

    Anttonen, Mikko J; Karjalainen, Reijo O

    2006-10-04

    Black currants (Ribes nigrum L.) contain a diverse range of phenolics and possess a high antioxidant activity, which makes them an interesting target for the functional food industry. In this study, phenolic profiles of organically and conventionally grown black currant fruits, collected from commercial farms within a climatically similar area, were compared. Compounds were identified using UV/vis and mass spectroscopy techniques and quantified with high-performance liquid chromatography equipped with UV/vis detection. Several different conjugates of hydroxycinnamic acids, flavonols, and anthocyanins were quantified. Statistically significant differences between farms were found for almost all compounds. Differences between the highest and the lowest measured values of major phenolic compounds of different phenolic classes ranged from 24 to 77%. Principal component analysis quite effectively separated farms from each other but did not cluster them according to cultivation technique. Thus, it was concluded that the biochemical quality of organically grown black currant fruits does not differ from those grown conventionally.

  12. Sensitivity of Shallow Land Burial to neutron environment and activation cross sections in IFE thick-liquid concepts

    OpenAIRE

    Cabellos de Francisco, Oscar Luis; J. Sanz; Reyes, S; Latkowski, J.; García Herranz, Nuria

    2006-01-01

    A comprehensive assessment on the eligibility of reduced activation (RA) steels as structural chamber material in Inertial Fusion Energy (IFE) thick-liquid concepts is performed. As far as alloying elements, it is shown that the activation of tungsten is a question to debate. Regarding impurity elements, it is analyzed if they could question the possibility of obtaining real RA steels for shallow land burial (SLB). The effect of the thickness of the liquid wall on the SLB response of alloying...

  13. Liquid Phase Synthesis of CoP Nanoparticles with High Electrical Conductivity for Advanced Energy Storage

    Directory of Open Access Journals (Sweden)

    Guo-Qun Zhang

    2017-01-01

    Full Text Available Transition metal phosphide alloys possess the metalloid characteristics and superior electrical conductivity and are a kind of high electrical conductive pseudocapacitive materials. Herein, high electrical conductive cobalt phosphide alloys are fabricated through a liquid phase process and a nanoparticles structure with high surface area is obtained. The highest specific capacitance of 286 F g−1 is reached at a current density of 0.5 A g−1. 63.4% of the specific capacitance is retained when the current density increased 16 times and 98.5% of the specific capacitance is maintained after 5000 cycles. The AC//CoP asymmetric supercapacitor also shows a high energy density (21.3 Wh kg−1 and excellent stability (97.8% of the specific capacitance is retained after 5000 cycles. The study provides a new strategy for the construction of high-performance energy storage materials by enhancing their intrinsic electrical conductivity.

  14. Investigation of the impact of high liquid viscosity on jet atomization in crossflow via high-fidelity simulations

    Science.gov (United States)

    Li, Xiaoyi; Gao, Hui; Soteriou, Marios C.

    2017-08-01

    Atomization of extremely high viscosity liquid can be of interest for many applications in aerospace, automotive, pharmaceutical, and food industries. While detailed atomization measurements usually face grand challenges, high-fidelity numerical simulations offer the advantage to comprehensively explore the atomization details. In this work, a previously validated high-fidelity first-principle simulation code HiMIST is utilized to simulate high-viscosity liquid jet atomization in crossflow. The code is used to perform a parametric study of the atomization process in a wide range of Ohnesorge numbers (Oh = 0.004-2) and Weber numbers (We = 10-160). Direct comparisons between the present study and previously published low-viscosity jet in crossflow results are performed. The effects of viscous damping and slowing on jet penetration, liquid surface instabilities, ligament formation/breakup, and subsequent droplet formation are investigated. Complex variations in near-field and far-field jet penetrations with increasing Oh at different We are observed and linked with the underlying jet deformation and breakup physics. Transition in breakup regimes and increase in droplet size with increasing Oh are observed, mostly consistent with the literature reports. The detailed simulations elucidate a distinctive edge-ligament-breakup dominated process with long surviving ligaments for the higher Oh cases, as opposed to a two-stage edge-stripping/column-fracture process for the lower Oh counterparts. The trend of decreasing column deflection with increasing We is reversed as Oh increases. A predominantly unimodal droplet size distribution is predicted at higher Oh, in contrast to the bimodal distribution at lower Oh. It has been found that both Rayleigh-Taylor and Kelvin-Helmholtz linear stability theories cannot be easily applied to interpret the distinct edge breakup process and further study of the underlying physics is needed.

  15. Development of a functionalized polymeric ionic liquid monolith for solid-phase microextraction of polar endocrine disrupting chemicals in aqueous samples coupled to high-performance liquid chromatography.

    Science.gov (United States)

    Feng, Juanjuan; Sun, Min; Bu, Yanan; Luo, Chuannan

    2015-09-01

    Ionic liquids (ILs) have been efficiently used as a "designer sorbent" in sample preparation. A novel 1-(3-aminopropyl)-3-(4-vinylbenzyl)imidazolium 4-styrenesulfonate IL monomer was synthesized and copolymerized with 1,6-di(3-vinylimidazolium) hexane bishexafluorophosphate IL as cross-linking agent to prepare a cross-linked polymeric ionic liquids (PILs) monolith. Coupled to high-performance liquid chromatography (HPLC), the PILs monolith was used as a solid-phase microextraction (SPME) sorbent to extract some polar endocrine disrupting chemical (EDCs) such as estrogens, bisphenol A, and phthalate esters in aqueous samples. Preparation and extraction conditions were investigated and optimized to obtain satisfactory extraction efficiency. Limits of detection (LODs) of the proposed method for three steroid estrogens and bisphenol A were 0.25 and 0.2 μg L(-1), respectively, which were lower than or comparable to some other sample preparation methods. Intra- and inter-day repeatability for all the analytes was 2.2-12%. The monolith-to-monolith repeatability was 7.4-15%. The extraction performance of the method for analysis of target estrogens in treated domestic wastewater was investigated and compared with a dispersive liquid-liquid microextraction (DLLME) method. The proposed SPME method provided better sensitivity and higher resistance to matrix interferences.

  16. Matrix solid-phase dispersion coupled with homogeneous ionic liquid microextraction for the determination of sulfonamides in animal tissues using high-performance liquid chromatography.

    Science.gov (United States)

    Wang, Zhibing; He, Mengyu; Jiang, Chunzhu; Zhang, Fengqing; Du, Shanshan; Feng, Wennan; Zhang, Hanqi

    2015-12-01

    Matrix solid-phase dispersion coupled with homogeneous ionic liquid microextraction was developed and applied to the extraction of some sulfonamides, including sulfamerazine, sulfamethazine, sulfathiazole, sulfachloropyridazine, sulfadoxine, sulfisoxazole, and sulfaphenazole, in animal tissues. High-performance liquid chromatography was applied to the separation and determination of the target analytes. The solid sample was directly treated by matrix solid-phase dispersion and the eluate obtained was treated by homogeneous ionic liquid microextraction. The ionic liquid was used as the extraction solvent in this method, which may result in the improvement of the recoveries of the target analytes. To avoid using organic solvent and reduce environmental pollution, water was used as the elution solvent of matrix solid-phase dispersion. The effects of the experimental parameters on recoveries, including the type and volume of ionic liquid, type of dispersant, ratio of sample to dispersant, pH value of elution solvent, volume of elution solvent, amount of salt in eluate, amount of ion-pairing agent (NH4 PF6 ), and centrifuging time, were evaluated. When the present method was applied to the analysis of animal tissues, the recoveries of the analytes ranged from 85.4 to 118.0%, and the relative standard deviations were lower than 9.30%. The detection limits for the analytes were 4.3-13.4 μg/kg. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. [Separation and identification of bovine lactoferricin by high performance liquid chromatography-matrix-assisted laser desorption/ionization time of flight/ time of flight mass spectrometry].

    Science.gov (United States)

    An, Meichen; Liu, Ning

    2010-02-01

    A high performance liquid chromatography-matrix-assisted laser desorption/ionization time of flight/time of flight mass spectrometry (HPLC-MALDI-TOF/TOF MS) method was developed for the separation and identification of bovine lactoferricin (LfcinB). Bovine lactoferrin was hydrolyzed by pepsin and then separated by ion exchange chromatography and reversed-phase liquid chromatography (RP-LC). The antibacterial activities of the fractions from RP-LC separation were determined and the protein concentration of the fraction with the highest activity was measured, whose sequence was indentified by MALDI-TOF/TOF MS. The relative molecular mass of LfcinB was 3 124.89 and the protein concentration was 18.20 microg/mL. The method of producing LfcinB proposed in this study has fast speed, high accuracy and high resolution.

  18. Liquid-liquid phase separation causes high turbidity and pressure during low pH elution process in Protein A chromatography.

    Science.gov (United States)

    Luo, Haibin; Lee, Nacole; Wang, Xiangyang; Li, Yuling; Schmelzer, Albert; Hunter, Alan K; Pabst, Timothy; Wang, William K

    2017-03-10

    Turbid elution pools and high column back pressure are common during elution of monoclonal antibodies (mAbs) by acidic pH in Protein A chromatography. This phenomenon has been historically attributed to acid-induced precipitation of incorrectly folded or pH-sensitive mAbs and host cell proteins (HCPs). In this work, we propose a new mechanism that may account for some observations of elution turbidity in Protein A chromatography. We report several examples of turbidity and high column back pressure occurring transiently under a short course of neutral conditions during Protein A elution. A systematic study of three mAbs displaying this behavior revealed phase separation characterized by liquid drops under certain conditions including neutral pH, low ionic strength, and high protein concentration. These liquid droplets caused solution turbidity and exhibited extremely high viscosity, resulting in high column back pressure. We found out that the droplets were formed through liquid-liquid phase separation (LLPS) as a result of protein self-association. We also found multiple factors, including pH, temperature, ionic strength, and protein concentration can affect LLPS behaviors. Careful selection of process parameters during protein A elution, including temperature, flow rate, buffer, and salt can inhibit formation of a dense liquid phase, reducing both turbidity (by 90%) and column back pressure (below 20 pounds per square inch). These findings provide both mechanistic insight and practical mitigation strategies for Protein A chromatography induced LLPS. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

  19. Targeting high-performance liquid chromatography-high-resolution mass spectrometry-solid-phase extraction-nuclear magnetic resonance analysis with high-resolution radical scavenging profiles - bioactive secondary metabolites from the endophytic fungus Penicillium namyslowskii

    DEFF Research Database (Denmark)

    Wubshet, Sileshi Gizachew; Nyberg, Nils; Tejesvi, Mysore V.

    2013-01-01

    The high-resolution radical scavenging profile of an extract of the endophytic fungus Penicillium namyslowskii was used to target analysis by high-performance liquid chromatography-high-resolution mass spectrometry-solid-phase extraction-nuclear magnetic resonance spectroscopy, i.e., HPLC...... NMR probe designed for 1.7-mm NMR tubes. To further explore the potential of the above HPLC-HRMS-SPE-NMR platform for analysis of endophytic extracts, six peaks displaying no radical scavenging activity were also analyzed. This allowed unambiguous identification of six metabolites, i...

  20. Mixing Characteristics of Coaxial Injectors at High Gas to Liquid Momentum Ratios

    Science.gov (United States)

    Strakey, P. A.; Talley, D. G.; Hutt, J. J.

    1999-01-01

    A study of the spray of a swirl coaxial gas-liquid injector operating at high gas to liquid momentum ratios is reported. Mixing and droplet size characteristics of the swirl injector are also compared to a shear coaxial injector, currently being used in the Space Shuttle Main Engine fuel preburner. The injectors were tested at elevated chamber pressures using water as a LOX simulant and nitrogen and helium as gaseous hydrogen simulants. The elevated chamber pressure allowed for matching of several of the preburner injector conditions including; gas to liquid momentum ratio, density ratio and Mach number. Diagnostic techniques used to characterize the spray included; strobe back-light imaging, laser sheet spray imaging, mechanical patternation, and a phase Doppler interferometry. Results thus far indicate that the radial spreading of the swirl coaxial spray is much less than was reported in previous studies of swirl injectors operating at atmospheric back-pressure. The swirl coaxial spray does, however, exhibit a smaller overall droplet size which may be interpreted as an increase in local mixing.

  1. Determination of metformin in human plasma by high-performance liquid chromatography.

    Science.gov (United States)

    Amini, Hossein; Ahmadiani, Abolhassan; Gazerani, Parisa

    2005-09-25

    A simple, selective and sensitive high-performance liquid chromatographic method with spectrophotometric detection was developed for the determination of antihyperglycemic agent metformin in human plasma using a novel sample extraction procedure. Liquid-liquid extraction of metformin and ranitidine (as internal standard) from plasma samples was performed with 1-butanol/n-hexane (50:50, v/v) in alkaline condition followed by back-extraction into diluted acetic acid. Chromatography was carried out using a silica column (250 mmx4.6 mm, 5 microm) under isocratic elution with acetonitrile-40 mM aqueous sodium dihydrogen phosphate (25:75, v/v), pH 6. The limit of quantification (LOQ) was 15.6 ng/ml and the calibration curves were linear up to 2000 ng/ml. The mean absolute recoveries for metformin and internal standard using the present extraction procedure were 98 and 95%, respectively. The intra- and inter-day coefficient of variation and percent error values of the assay method were all less than 8.3%.

  2. Sensitive determination of clarithromycin in human plasma by high-performance liquid chromatography with spectrophotometric detection.

    Science.gov (United States)

    Amini, Hossein; Ahmadiani, Abolhassan

    2005-03-25

    A rapid, selective and sensitive high-performance liquid chromatographic method with spectrophotometric detection was developed for the determination of clarithromycin in human plasma. Liquid-liquid extraction of clarithromycin and norverapamil (as internal standard) from plasma samples was performed with n-hexane/1-butanol (98:2, v/v) in alkaline condition followed by back-extraction into diluted acetic acid. Chromatography was carried out using a CN column (250 mm x 4.6 mm, 5 microm) under isocratic elution with acetonitrile-50 mM aqueous sodium dihydrogen phosphate (32:68, v/v), pH 4.5. Detection was made at 205 nm and analyses were run at a flow-rate of 1.0 ml/min at 40 degrees C. The analysis time was less than 11 min. The method was specific and sensitive with a quantification limit of 31.25 ng/ml and a detection limit of 10 ng/ml in plasma. The mean absolute recovery of clarithromycin from plasma was 95.9%, while the intra- and inter-day coefficient of variation and percent error values of the assay method were all less than 9.5%. Linearity was assessed in the range of 31.25-2000 ng/ml in plasma with a correlation coefficient of greater than 0.999. The method was used to analyze several hundred human plasma samples for bioavailability studies.

  3. Ionic liquid-impregnated activated carbon for biohydrogen purification in an adsorption unit

    Science.gov (United States)

    Yusuf, N. Y.; Masdar, M. S.; Isahak, W. N. R. W.; Nordin, D.; Husaini, T.; Majlan, E. H.; Rejab, S. A. M.; Chew, C. L.

    2017-06-01

    Biological methods for hydrogen production (biohydrogen) are known as energy intensive and can be operated at ambient temperature and pressure; however, consecutive productions such as purification and separation processes still remain challenging in the industry. Various techniques are used to purify and separate hydrogen. These techniques include the use of sorbents/solvents, membranes and cryogenic distillation. In this study, carbon dioxide (CO2) was purified and separated from biohydrogen to produce high purity hydrogen gas. CO2 capture was studied using the activated carbon (AC) modified with the ionic liquid (IL) choline chloride as adsorbent. The physical and chemical properties of the adsorbents were characterized through XRD, FTIR, SEM-EDX, TGA, and BET analyses. The effects of IL loading, flow rate, temperature, and gas mixture were also investigated based on the absorption and desorption of CO2. The CO2 level in the biohydrogen composition was analyzed using a CO2 gas analyzer. The SEM image indicated that the IL homogeneously covered the AC surface. High IL dispersion inlet enhanced the capability of the adsorbent to capture CO2 gas. The thermal stability and presence of the functionalized group of ILs on AC were analyzed by TGA and FTIR techniques, respectively. CO2 adsorption experiments were conducted using a 1 L adsorber unit. Hence, adsorption technologies exhibit potential for biohydrogen purification and mainly affected by adsorbent ability and operating parameters. This research presents an improved biohydrogen technique based on adsorption technology with novel adsorbents. Two different types of commercial CO2 adsorbents were used in the experiment. Results show that the IL/AC exhibited properties suitable for CO2 adsorption. The IL/AC sample presented a high CO2 uptake of 30 wt. % IL when treated at 30 °C for 6 h under a flow rate of 1 L/min. The presence of IL increased the selectivity of CO2 removal during the adsorption process. This IL

  4. Aqueous two-phase based on ionic liquid liquid-liquid microextraction for simultaneous determination of five synthetic food colourants in different food samples by high-performance liquid chromatography.

    Science.gov (United States)

    Sha, Ou; Zhu, Xiashi; Feng, Yanli; Ma, Weixing

    2015-05-01

    A rapid and effective method of aqueous two-phase systems based on ionic liquid microextraction for the simultaneous determination of five synthetic food colourants (tartrazine, sunset yellow, amaranth, ponceau 4R and brilliant blue) in food samples was established. High-performance liquid chromatography coupled with an ultraviolet detector of variable wavelength was used for the determinations. 1-alkyl-3-methylimidazolium bromide was selected as the extraction reagent. The extraction efficiency of the five colourants in the proposed system is influenced by the types of salts, concentrations of salt and [CnMIM]Br, as well as the extracting time. Under the optimal conditions, the extraction efficiencies for these five colourants were above 95%. The phase behaviours of aqueous two-phase system and extraction mechanism were investigated by UV-vis spectroscopy. This method was applied to the analysis of the five colourants in real food samples with the detection limit of 0.051-0.074 ng/mL. Good spiked recoveries from 93.2% to 98.9% were obtained. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Analysis of Camellia sinensis green and black teas via ultra high performance liquid chromatography assisted by liquid-liquid partition and two-dimensional liquid chromatography (size exclusion × reversed phase).

    Science.gov (United States)

    Scoparo, Camila T; de Souza, Lauro M; Dartora, Nessana; Sassaki, Guilherme L; Gorin, Philip A J; Iacomini, Marcello

    2012-01-27

    Green and black teas (Camellia sinensis) contain compounds ranging from simple phenolics to complex glycosides, many of which have well-recognized health benefits. Here, we describe two methodologies aiming to achieve a comprehensive analysis of hydro-alcoholic extracts of C. sinensis. In the first step, the extracts were partitioned in water, n-butanol, ethyl acetate and chloroform to separate the compounds according to their polarity, yielding less complex samples to be analyzed by ultra high performance liquid chromatography coupled with mass spectrometry (UHPLC-MS). Additionally, a comprehensive two dimensional liquid chromatography (2D-LC) technique, employing size exclusion chromatography (SEC) × reversed phase (BEH-C18) was developed. The following compounds were identified on the basis of retention time, UV-spectra and MS fragmentation patterns: catechins, theaflavins and their gallate derivatives; kaempferol, quercetin and myricetin mono-, di-, tri- and tetraglycosides; esters of quinic acid and gallic or hydroxycinnamic acids; purine alkaloids, such as caffeine and theobromine and many lipids. Additionally, there were many novel compounds that were previously undescribed, such as saponin isomers and gallic acid esters of four glycosides of myricetin, quercetin and kaempferol. Copyright © 2011 Elsevier B.V. All rights reserved.

  6. Elastically cooperative activated barrier hopping theory of relaxation in viscous fluids. II. Thermal liquids.

    Science.gov (United States)

    Mirigian, Stephen; Schweizer, Kenneth S

    2014-05-21

    Building on the elastically collective nonlinear Langevin equation theory developed for hard spheres in Paper I, we propose and implement a quasi-universal theory for the alpha relaxation of thermal liquids based on mapping them to an effective hard sphere fluid via the dimensionless compressibility. The result is a zero adjustable parameter theory that can quantitatively address in a unified manner the alpha relaxation time over 14 or more decades. The theory has no singularities above zero Kelvin, and relaxation in the equilibrium low temperature limit is predicted to be of a roughly Arrhenius form. The two-barrier (local cage and long range collective elastic) description results in a rich dynamic behavior including apparent Arrhenius, narrow crossover, and deeply supercooled regimes, and multiple characteristic or crossover times and temperatures of clear physical meaning. Application of the theory to nonpolar molecules, alcohols, rare gases, and liquids metals is carried out. Overall, the agreement with experiment is quite good for the temperature dependence of the alpha time, plateau shear modulus, and Boson-like peak frequency for van der Waals liquids, though less so for hydrogen-bonding molecules. The theory predicts multiple growing length scales upon cooling, which reflect distinct aspects of the coupled local hopping and cooperative elastic physics. Calculations of the growth with cooling of an activation volume, which is strongly correlated with a measure of dynamic cooperativity, agree quantitatively with experiment. Comparisons with elastic, entropy crisis, dynamic facilitation, and other approaches are performed, and a fundamental basis for empirically extracted crossover temperatures is established. The present work sets the stage for addressing distinctive glassy phenomena in polymer melts, and diverse liquids under strong confinement.

  7. An investigation on a semi-active magnetorheological tuned liquid column damper (MR-TLCD)

    Science.gov (United States)

    Sun, H. X.; Wang, X. Y.

    2016-04-01

    this paper, a novel semi-active magnetorheological tuned liquid column damper (MR-TLCD) device combining tuned liquid column damper (TLCD) and magnetorheological damper (MRD) is devised for wind or earthquake vibration control of civil structures. In this device, a traditional moving head loss in the TLCD is replaced with a controlled MRD in the bottom or one side of the vertical column, which can easily and rapidly adjust the damping of the device. A semi-active experimental prototype MR-TLCD consisting of a shear rotary MRD and a TLCD is built. Based on the four basic presumptions, a dynamic model of the devised MR-TLCD is established using the Lagrange equation. In this equation, the formula of MRD employs the Bingham Boltzmann model. The natural frequency of the MR-TLCD is determined by the total central length and spring stiffness. It is worth noting that the natural frequency differs with the simple TLCD, because the device adds a joint spring. An equivalent linear damping expression is developed under harmonic excitation, and its mechanical model is developed using the equivalent period displacement and the coulomb friction force of MRD. At the same time, the equivalent damping can be adjusted by the real-time applied current, which can achieve the semi-active control performance. To validate the proposed frequency and damping model, Experimental test is conducted on a section area 150mm × 150mm and a total length 2.24m of the MR-TLCD dimensions. Comparisons are made between predicted and measured TLCD liquid surface displacement motion. The result shows the error of its nature frequency is only 2.29%.

  8. Soft Micro- to Nanolithography Using Highly Periodic Smectic Liquid Crystal Defects

    Science.gov (United States)

    Jung, Hee-Tae; Kim, Yun Ho; Yoon, Dong Ki; Jeong, Hyeon Su

    2009-03-01

    Achieving perfect long-range order with soft building blocks at high speed and high resolution is one of the most exciting interdisciplinary research areas in current materials science and nano-biotechnology. Here, we have developed highly periodic patterns with sub-micrometer features over large-areas using toric focal conic domains (TFCDs) originated from smectic liquid crystal (LC). TFCDs are accomplished by precisely controlling the surface and interfacial properties of smectic LC. In order to apply the smectic liquid crystal defect arrays in lithography, the hexagonal arrays of domain patterns are used as molds for ultraviolet (UV) curable polymers, thereby providing LC defect stamps with high spatial resolution over large areas. Our method was further utilized to transfer patterns with sub-micrometer features from the polymer stamp surface to a secondary surface by microcontact printing (μ-CP). The patterning method based on LC defects has significant advantages over existing lithographic approaches: 1) the masters and stamps are easy to fabricate, 2) the masters and stamps provide long-range surface ordering over large-areas, 3) the periodic arrays are formed quickly in several seconds, and 4) the stamps can generate feature sizes on the micrometer and submicrometer length scales, and 5) the methodology offers the possibility of controlling the array geometry by altering the geometry of the confining channels.

  9. Bimesogenic liquid crystals: new materials for high-performance photonics devices and displays

    Science.gov (United States)

    Coles, Harry J.

    2007-02-01

    We describe wide temperature range new bimesogenic nematic liquid crystals with high flexoelectro-optic coefficients (e/K),of the order of 1.5- 2.0 CN -1 m -1, high switching angles, > 100° and microsecond response times which may be used to give gray scale devices in both the ULH texture, with an optimum optical in plane switch of 45° at fields of 4Vμm -1 or less, and in the USH or Grandjean texture (with a unique optically isotropic "field off" black state and contrast ratios of > 1000:1), using "in plane" electric fields, with switching times of the order of 20μs. The new materials and devices give μs level to level switching and the real potential for colour filter free frame sequential colour switching. New highly reflective Blue Phase devices, stable over a 50°C temperature range, in which an electric field is used to switch the reflection from red to green, for example, will be described. Full RGB reflections may be obtained with switching times of a few milliseconds. Finally we will briefly mention potential applications including high efficiency RGB liquid crystal laser sources.

  10. Larvicidal Activity of The Mixture of Cashew Nut Shell Liquid (CNSL and Aqueous Extract of Sapindus rarak DC Against Larvae of Culex quinquefasciatus

    Directory of Open Access Journals (Sweden)

    Rahmi Safarina Fauziah

    2014-04-01

    Full Text Available The aim of this study was to evaluate the larvicidal activity of Cashew Nut Shell Liquid (CNSL against the Culex quinque fasciatus in larval stage. The CNSL was diluted in water by addition of aqueous extract of Sapindus rarak DC to increase its solubility. Larvae were exposed to varying concentrations of that mixture. The larvae mortality was observed after 24 h exposure. LC50 and LC90 value by extrapolation were 20,52 ppm and 55,41 ppm respectively. CNSL were specified by characterizing its physico-chemical properties and  anacardic acid as marker compound by High Performance Chromatography (HPLC. The results were the mixture of Cashew Nut Shell Liquid (CNSL and Aquous extract of Sapindus rarak DC had larvicidal activity against Cx. Quinque-fasciatus and further investigations were needed to identify the fatty acid derivative as active compound of CNSL which  responsible for larvicidal activity.

  11. [Formation of paroxysmal brain activity in the liquidators of the consequences of the Chernobyl nuclear disaster].

    Science.gov (United States)

    Podsonnaya, I V; Shumacher, G I; Efremushkin, G G; Gelobetskaya, E D

    2015-01-01

    To investigate the effect of ionizing radiation on the formation of paroxysmal brain activity (PBA) in the liquidators of the consequences of the Chernobyl nuclear disaster in view of their age on the date of exposure to radiation. EEG examinations were performed in 105 liquidators of the consequences of the nuclear disaster (LCND) and 90 people without radiation anamnesis (control group). It has been determined that the formation of paroxysmal brain activity in LCND occurs 3.5 times more frequent (p<0.001) and 15-17 years earlier (p<0.001) than in the control group and mainly during the first 10 years after the exposure to radiation. The history of the exposure to ionizing radiation is associated with the increased risk of the development of convulsive PBA as focal seizures by 5.5 times (p<0.001), interictal epileptiform discharges (IED) in EEG by 3.3 times (p<0.001). Radiation effect on LCND under 30 years old increases (as compared to the control group) the risk of the formation of elevated paroxysmal brain activity by 19 times (p<0.001), convulsive epileptic seizures by 33.3 times (p<0.001), interictal epileptiform discharges in EEG by 12 times (p<0.001), asymptomatic focal epileptoid nidus in EEG by 9.3 times (p<0.001). Stimulating effect of ionizing radiation on the development of PBA related to the age on the date of exposure to radiation was found.

  12. High strength alloys for high temperature service in liquid-salt cooled energy systems

    Science.gov (United States)

    Holcomb, David E.; Muralidharan, Govindarajan; Wilson, Dane F.

    2017-01-10

    An essentially cobalt-free alloy consists essentially of, in terms of weight percent: 6.3 to 7.2 Cr, 0.5 to 2 Al, 0 to 5 Fe, 0.7 to 0.8 Mn, 9 to 12.5 Mo, 0 to 6 Ta, 0.75 to 3.5 Ti, 0.01 to 0.25 Nb, 0.2 to 0.6 W, 0.02 to 0.04 C, 0 to 0.001 B, 0.0001 to 0.002 N, balance Ni. The alloy is characterized by a .gamma.' microstructural component in the range of 3 to 17.6 weight percent of the total composition. The alloy is further characterized by, at 850.degree. C., a yield strength of at least 60 Ksi, a tensile strength of at least 70 Ksi, a creep rupture life at 12 Ksi of at least 700 hours, and a corrosion rate, expressed in weight loss [g/(cm.sup.2sec)]10.sup.-11 during a 1000 hour immersion in liquid FLiNaK at 850.degree. C., in the range of 5.5 to 17.

  13. High strength alloys for high temperature service in liquid-salt cooled energy systems

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David E.; Muralidharan, Govindarajan; Wilson, Dane F.

    2017-01-10

    An essentially cobalt-free alloy consists essentially of, in terms of weight percent: 6.3 to 7.2 Cr, 0.5 to 2 Al, 0 to 5 Fe, 0.7 to 0.8 Mn, 9 to 12.5 Mo, 0 to 6 Ta, 0.75 to 3.5 Ti, 0.01 to 0.25 Nb, 0.2 to 0.6 W, 0.02 to 0.04 C, 0 to 0.001 B, 0.0001 to 0.002 N, balance Ni. The alloy is characterized by a .gamma.' microstructural component in the range of 3 to 17.6 weight percent of the total composition. The alloy is further characterized by, at 850.degree. C., a yield strength of at least 60 Ksi, a tensile strength of at least 70 Ksi, a creep rupture life at 12 Ksi of at least 700 hours, and a corrosion rate, expressed in weight loss [g/(cm.sup.2sec)]10.sup.-11 during a 1000 hour immersion in liquid FLiNaK at 850.degree. C., in the range of 5.5 to 17.

  14. High-Performance Liquid Chromatographic-Tandem Mass Spectrometric Determination of Itraconazole in Human Plasma for Bioavailability and Bioequivalence Studies

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Young Wook; Nam, Dae Young; Kang, Kyoung Hoon; Ha, Kyung Wook; Han, In Hee; Chang, Byung Kon; Yoon, Mi Kyeong; Lee, Jae Hwi [Chung-Ang University, Seoul (Korea, Republic of)

    2006-02-15

    A highly sensitive high-performance liquid chromatographic-tandem mass spectrometric method (HPLC-MSMS) has been developed to quantify itraconazole in human plasma for the purpose of pharmacokinetic studies. Sample preparation was carried out by liquid-liquid extraction using loratadine as an internal standard. Chromatographic separation used a YMC C{sub 18} column, giving an extremely fast total run time of 3 min. The method was validated and used for the bioequivalence study of itraconazole tablets in healthy male volunteers (n = 31). The lower limit of detection proved to be 0.2 ng /mL for itraconazole.

  15. Study on measurement accuracy of active optics null test systems based on liquid crystal spatial light modulator and laser interferometer

    Science.gov (United States)

    Liu, Shijie; Xu, Longbo; Ma, Xiao; Zhang, Zhigang; Zhou, You; Lu, Qi; Bai, Yunbo; Shao, Jianda

    2017-06-01

    A common way to test high-quality aspherical lenses is to use a measurement system based on a set of null corrector and a laser interferometer. The null corrector can either be a combination of spherical lenses or be a computer generated hologram (CGH), which compensates the aspheric wave-front being tested. However, the null optics can't be repeatedly used once the shape of tested optics changes. Alternative active null correctors have been proposed based on dynamic phase modulator devices. A typical dynamic phase modulator is liquid crystal spatial light modulator (LCSLM), which can spatially change the refractive index of the liquid crystal and thus modify the phase of the input wave-front. Even though the measurement method based on LCSLM and laser interferometer has been proposed and demonstrated for optical testing several years ago, it still can't be used in the high quality measurement process due to its limited accuracy. In this paper, we systematically study the factors such as LCSLM structure parameters, encoding error and laser interferometer performance, which significantly affect the measurement accuracy. Some solutions will be proposed in order to improve the measurement accuracy based on LCSLM and laser interferometer.

  16. Simultaneous Multiphase PIV of Capillary Waves on a High Velocity Liquid Jet

    Science.gov (United States)

    Andre, Matthieu; Bardet, Philippe

    2013-11-01

    Relaxation of a laminar boundary layer below the free surface of a jet is inviscidly unstable and can roll-up which generates millimeter size waves. The latter largely modify important characteristics of jets such as heat and mass transfers between phases and can lead to breakup, or air entrainment. Two dimensional linear stability analysis predicts the initial disturbance wavelength and growth rate for inviscid flows; it does not take into account the effects of viscosity, non-linearity, or actual boundary layer profile. Because of the small temporal and spatial scales associated with this flow, few experimental data are available. Data acquisition is further complicated by the presence of a free surface with steep waves. The current experiment consists in a 20.3 mm × 146.0 mm water slab laminar jet flowing onto a transparent open-channel at a Reynolds number of 2.9 × 104 to 1.4 × 105. Two high speed cameras are employed to obtain velocity fields simultaneously in the liquid and in the gas phase with Particle Image Velocimetry (PIV). Fluorescent dye is added in the liquid in order to improve interface detection. Each phase is recorded at 10 kHz, leading to a temporal resolution of 100 μs and high magnification lenses give a spatial resolution of 200 μm. The results confirm the mechanism of formation of the short surface waves. Generation of surface vorticity is identified in high curvature regions. Knowledge of the velocities in both phases allows studying vorticity flux through the free surface. The latter stage of wave growth can be accompanied by the formation of a vortex pair in the liquid and air entrapment.

  17. High temperature radiance spectroscopy measurements of solid and liquid uranium and plutonium carbides

    Energy Technology Data Exchange (ETDEWEB)

    Manara, D., E-mail: dario.manara@ec.europa.eu [European Commission, Joint Research Centre, Institute for Transuranium Elements, P.O. Box 2340, 76125 Karlsruhe (Germany); De Bruycker, F. [European Commission, Joint Research Centre, Institute for Transuranium Elements, P.O. Box 2340, 76125 Karlsruhe (Germany); CNRS - CEMHTI Site Haute Temperature, 1D Avenue de la Recherche Scientifique, 45071 Orleans cedex 2 (France); Boboridis, K. [European Commission, Joint Research Centre, Institute for Transuranium Elements, P.O. Box 2340, 76125 Karlsruhe (Germany); Tougait, O. [Universite de Rennes 1, Sciences Chimiques de Rennes, UMR CNRS 6226, 263, Av. du General Leclerc, F-35042 Rennes cedex (France); Eloirdi, R. [European Commission, Joint Research Centre, Institute for Transuranium Elements, P.O. Box 2340, 76125 Karlsruhe (Germany); Malki, M. [CNRS - CEMHTI Site Haute Temperature, 1D Avenue de la Recherche Scientifique, 45071 Orleans cedex 2 (France)

    2012-07-15

    In this work, an experimental study of the radiance of liquid and solid uranium and plutonium carbides at wavelengths 550 nm Less-Than-Or-Slanted-Equal-To {lambda} Less-Than-Or-Slanted-Equal-To 920 nm is reported. A fast multi-channel spectro-pyrometer has been employed for the radiance measurements of samples heated up to and beyond their melting point by laser irradiation. The melting temperature of uranium monocarbide, soundly established at 2780 K, has been taken as a radiance reference. Based on it, a wavelength-dependence has been obtained for the high-temperature spectral emissivity of some uranium carbides (1 Less-Than-Or-Slanted-Equal-To C/U Less-Than-Or-Slanted-Equal-To 2). Similarly, the peritectic temperature of plutonium monocarbide (1900 K) has been used as a reference for plutonium monocarbide and sesquicarbide. The present spectral emissivities of solid uranium and plutonium carbides are close to 0.5 at 650 nm, in agreement with previous literature values. However, their high temperature behaviour, values in the liquid, and carbon-content and wavelength dependencies in the visible-near infrared range have been determined here for the first time. Liquid uranium carbide seems to interact with electromagnetic radiation in a more metallic way than does the solid, whereas a similar effect has not been observed for plutonium carbides. The current emissivity values have also been used to convert the measured radiance spectra into real temperature, and thus perform a thermal analysis of the laser heated samples. Some high-temperature phase boundaries in the systems U-C and Pu-C are shortly discussed on the basis of the current results.

  18. Surface-active ionic liquids in micellar catalysis: impact of anion selection on reaction rates in nucleophilic substitutions.

    Science.gov (United States)

    Cognigni, Alice; Gaertner, Peter; Zirbs, Ronald; Peterlik, Herwig; Prochazka, Katharina; Schröder, Christian; Bica, Katharina

    2016-05-21

    A series of surface-active ionic liquids based on the 1-dodecyl-3-methylimidazolium cation and different anions such as halides and alkylsulfates was synthesized. The aggregation behavior of these ionic liquids in water was characterized by surface tension, conductivity measurements and UV-Vis spectroscopy in order to determine the critical micelle concentration (CMC) and to provide aggregation parameters. The determination of surface activity and aggregation properties of amphiphilic ionic liquids was accompanied by SAXS studies on selected surface-active ionic liquids. The application of these surface-active ionic liquids with different anions was tested in nucleophilic substitution reactions for the degradation of organophosphorus compounds. Kinetic studies via UV-Vis spectrophotometry showed a strong acceleration of the reaction in the micellar system compared to pure water. In addition, an influence of the anion was observed, resulting in a correlation between the anion binding to the micelle and the reaction rate constants, indicating that the careful choice of the surface-active ionic liquid can considerably affect the outcome of reactions.

  19. Rapid determination of amphotericin B levels in serum by high-performance liquid chromatography without interference by bilirubin.

    OpenAIRE

    Hosotsubo, H; Takezawa, J; Taenaka, N; Hosotsubo, K; Yoshiya, I

    1988-01-01

    A high-performance liquid chromatographic method for the determination of amphotericin B concentrations in human serum without bilirubin interference was developed and compared with a microbiological assay. The high-performance liquid chromatographic assay utilized a reversed-phase trimethyl silica column, simple sample preparation, and visible detection. Reproducibility studies yielded coefficient-of-variation ranges from 1.02 to 2.11% for within-day precision and 2.88 to 4.32% for between-d...

  20. High Density MgB2 Obtained by Reactive Liquid Mg Infiltration

    OpenAIRE

    Giunchi, Giovanni

    2002-01-01

    A new route to the sintering of MgB2 has been identified, based on a reactive infiltration of liquid Mg on a powdered B preform. The technique allows to obtain large bulk manufacts in an inexpensive way, without the need of high pressure apparatus. The best of the obtained samples shows a transport current density of 3 kA/cm2 at 4.2K and 9 T. The critical aspects of the technology are presented, together with the recent achievements and the perspective applications.

  1. Determination of Duloxetine and Its Major Metabolites in Rabbit Plasma by High-Performance Liquid Chromatography

    OpenAIRE

    T. K. Laha; S. Sen; G. Mishra

    2015-01-01

    A rapid and sensitive high performance liquid chromatographic method is described for simultaneous determination of duloxetine and its major metabolites, such as 4- hydroxy duloxetine (M7), Glucuronide conjugate of 5-hydroxy-6-methoxy duloxetine (M6) and Glucuronide conjugate of dihydrodiol duloxetine (M12) in rabbit plasma. HPLC analysis was carried out on a µ-Bondapak C18 column (250 mm × 4.6 mm, 5µm particle size) using methanol: phosphate buffer (pH 7.9, 50 mM) (7:3 v/v) as the mobile pha...

  2. Liquid crystal spherical microlens array with high fill factor and optical power.

    Science.gov (United States)

    Algorri, José Francisco; Urruchi, Virginia; Bennis, Noureddine; Morawiak, Przemek; Sánchez-Pena, José Manuel; Otón, José Manuel

    2017-01-23

    A novel liquid crystal spherical microlens array with high optical power and almost 100% of fill-factor is proposed and experimentally demonstrated. The combination of a specific structure and electrical waveforms applied to the electrodes generates an array of spherical microlenses with square aperture. The manufacturing process is simple (patterned electrodes) and the microlenses are reconfigurable by low voltage signals (the electrodes are in contact with the LC layer). This device could be a key for the next generation of autostereoscopic devices based on Integral Imaging technique.

  3. Shapes and Fissility of Highly Charged and Rapidly Rotating Levitated Liquid Drops

    Science.gov (United States)

    Liao, L.; Hill, R. J. A.

    2017-09-01

    We use diamagnetic levitation to investigate the shapes and the stability of free electrically charged and spinning liquid drops of volume ˜1 ml. In addition to binary fission and Taylor cone-jet fission modes observed at low and high charge density, respectively, we also observe an unusual mode which appears to be a hybrid of the two. Measurements of the angular momentum required to fission a charged drop show that nonrotating drops become unstable to fission at the amount of charge predicted by Lord Rayleigh. This result is in contrast to the observations of most previous experiments on fissioning charged drops, which typically exhibit fission well below Rayleigh's limit.

  4. High diffraction efficiency polarization gratings recorded by biphotonic holography in an azobenzene liquid crystalline polyester

    DEFF Research Database (Denmark)

    Sánchez, C; Alcalá, R; Hvilsted, Søren

    2001-01-01

    High diffraction efficiencies have been achieved with polarization gratings recorded in thin films of an azobenzene side-chain liquid crystalline polyester by means of biphotonic processes. Efficiency values up to 30% have been reached after an induction period of 300 s and subsequent evolution...... is kept in darkness. Red light illumination of the erased film increases the recovered efficiency value and the recovery rate....... with the sample in darkness. These values are at least two orders of magnitude higher than those previously reported for biphotonic recording. The gratings can be erased with unpolarized blue light and partial recovery of the diffraction efficiency has been observed after the erasure process when the sample...

  5. High temperature vapour-liquid equilibria of water-polyalcohol mixtures

    OpenAIRE

    Cristino,Ana Filipa Russo de Albuquerque

    2014-01-01

    Tese de doutoramento, Química (Química Tecnológica), Universidade de Lisboa, Faculdade de Ciências, 2014 It is known that the presence of strong hydrogen bonds in the liquid state creates azeotropes, which disappear with the increase of temperature. This behavior suggests that the distillation at high temperatures could provide a good strategy to separate components of binary mixtures such as alcohol-water systems, very relevant in the chemical industry. Biodegradable fuels start to play ...

  6. Detection of cheese whey and caseinomacropeptide in fermented milk beverages using high performance liquid chromatography

    OpenAIRE

    E.H.P. Andrade; M.R. Souza; L.M. Fonseca; C.F.A.M. Penna; M.M.O.P. Cerqueira; T. Roza; B. Seridan; M.F.S. Resende; F.A. Pinto; C.N.B.C. Villanoeva; M.O. Leite

    2014-01-01

    Cheese whey level and caseinomacropeptide (CMP) index of fermented milk beverages added with four levels of cheese whey (0, 10, 20, and 40%) and stored at 8-10oC for 0, 7, 14 and 21 days were determined by high performance liquid chromatography-gel filtration (HPLC-GF). Additionally, the interference of the starter culture and the storage time on the detection of cheese whey and CMP were investigated. Refrigerated storage up to 21 days did not affect (P>0.05) cheese whey and CMP amounts in mi...

  7. High transmittance optical films based on quantum dot doped nanoscale polymer dispersed liquid crystals

    Science.gov (United States)

    Gandhi, Sahil Sandesh; Chien, Liang-Chy

    2016-04-01

    We propose a simple way to fabricate highly transparent nanoscale polymer dispersed liquid crystal (nano-PDLC) films between glass substrates and investigate their incident angle dependent optical transmittance properties with both collimated and Lambertian intensity distribution light sources. We also demonstrate that doping nano-PDLC films with 0.1% InP/ZnS core/shell quantum dots (QD) results in a higher optical transmittance. This work lays the foundation for such nanostructured composites to potentially serve as roll-to-roll coatable light extraction or brightness enhancement films in emissive display applications, superior to complex nanocorrugation techniques proposed in the past.

  8. Highly tunable large core single-mode liquid crystal photonic bandgap fiber

    DEFF Research Database (Denmark)

    Alkeskjold, Thomas Tanggaard; Lægsgaard, Jesper; Bjarklev, Anders Overgaard

    2006-01-01

    We demonstrate a highly tunable photonic bandgap fiber, which has a large-core diameter of 25 mu m and an effective mode area of 440 mu m(2). The tunability is achieved by infiltrating the air holes of a photonic crystal fiber with an optimized liquid-crystal mixture having a large temperature...... gradient of the refractive indices at room temperature. A bandgap tuning sensitivity of 27 nm/degrees C is achieved at room temperature. The insertion loss is estimated to be less than 0.5 dB and caused mainly by coupling loss between the index-guided mode and the bandgap-guided mode. (c) 2006 Optical...

  9. High-performance liquid chromatographic determination of molluscicidal saponins from Phytolacca dodecandra (Phytolaccaceae).

    Science.gov (United States)

    Slacanin, I; Marston, A; Hostettmann, K

    1988-09-02

    A high-performance liquid chromatographic method is described for the determination of oleanane saponins in Phytolacca dodecandra (Phytolaccaceae), a plant with potent molluscicidal properties. The molluscicidal monodesmosidic saponins of the berries were determined at 254 nm as their 4-bromophenacyl derivatives, whereas the non-derivatized bidesmosidic saponins, lacking a free carboxyl group, were determined at 206 nm. A comparison of different extraction procedures showed that with cold water predominantly monodesmosidic saponins were obtained, whereas hot water gave mainly bidesmosidic (non-molluscicidal) saponins.

  10. Automated high-pressure liquid chromatographic analysis of aspirin, phenacetin, and caffeine.

    Science.gov (United States)

    Ascione, P P; Chrekian, G P

    1975-06-01

    An automated high-pressure liquid chromatographic (HPLC) method for the separation and determination of aspirin, phenacetin, and caffeine in pharmaceutical dosage forms is descreibed. Separation of these compounds for quantitation is achieved on a controlled pore glass support, utilizing a mixture of acetic acid and chloroform as the mobile phase. The method is specific, accurate, and simple and provides for the quantitation of each chromatogram in a continuous fashion every 7 min. HPLC separation of other analgesics was studied on a spherical siliceous support. The feasibility of determining free salicylic acid in analgesics also was established.

  11. Determination of drug stability in aspirin tablet formulations by high-pressure liquid chromatography.

    Science.gov (United States)

    Taguchi, V Y; Cotton, M L; Yates, C H; Millar, J F

    1981-01-01

    Salicylic acid and aspirin were resolved from the other salicylates in thermally degraded multicomponent tablets and determined quantitatively. The analytical method involved wetting the powdered tablet with acetic acid and diluting with chloroform to extract the drug components. Automated high-pressure liquid chromatographic analyses of filtered extracts were performed on a silica column with a mobile phase of acetic acid in heptane. The method was capable of resolving the major thermally induced transformation products in tablet formulations. It was sensitive to approximately 0.1 mg of salicylic acid/tablet. Good agreement with the compendial method for free salicylic acid was obtained.

  12. Study of Saiga Horn Using High-Performance Liquid Chromatography with Mass Spectrometry

    Directory of Open Access Journals (Sweden)

    Kateřina Mikulíková

    2012-01-01

    Full Text Available The saiga horns have been investigated the using of modern analytic methods. High-performance liquid chromatography (HPLC with mass-spectrometric (MS and MS/MS detection and polyacrylamide gel electrophoresis (PAGE were used. It could be concluded that basic proteins of the saiga horns are keratins and collagen. The basic representation protein in all samples is keratin type I microfibrillar (from sheep, keratin type II microfibrillar (from sheep, collagen type I (α1 (from bovine and collagen type I (α2 (from bovine. Free amino acids we determined in all samples are nontreated by enzyme.

  13. High-temperature compatibility between liquid metal as PWR fuel gap filler and stainless steel and high-density concrete

    Science.gov (United States)

    Wongsawaeng, Doonyapong; Jumpee, Chayanit; Jitpukdee, Manit

    2014-08-01

    In conventional nuclear fuel rods for light-water reactors, a helium-filled as-fabricated gap between the fuel and the cladding inner surface accommodates fuel swelling and cladding creep down. Because helium exhibits a very low thermal conductivity, it results in a large temperature rise in the gap. Liquid metal (LM; 1/3 weight portion each of lead, tin, and bismuth) has been proposed to be a gap filler because of its high thermal conductivity (∼100 times that of He), low melting point (∼100 °C), and lack of chemical reactivity with UO2 and water. With the presence of LM, the temperature drop across the gap is virtually eliminated and the fuel is operated at a lower temperature at the same power output, resulting in safer fuel, delayed fission gas release and prevention of massive secondary hydriding. During normal reactor operation, should an LM-bonded fuel rod failure occurs resulting in a discharge of liquid metal into the bottom of the reactor pressure vessel, it should not corrode stainless steel. An experiment was conducted to confirm that at 315 °C, LM in contact with 304 stainless steel in the PWR water chemistry environment for up to 30 days resulted in no observable corrosion. Moreover, during a hypothetical core-melt accident assuming that the liquid metal with elevated temperature between 1000 and 1600 °C is spread on a high-density concrete basement of the power plant, a small-scale experiment was performed to demonstrate that the LM-concrete interaction at 1000 °C for as long as 12 h resulted in no penetration. At 1200 °C for 5 h, the LM penetrated a distance of ∼1.3 cm, but the penetration appeared to stop. At 1400 °C the penetration rate was ∼0.7 cm/h. At 1600 °C, the penetration rate was ∼17 cm/h. No corrosion based on chemical reactions with high-density concrete occurred, and, hence, the only physical interaction between high-temperature LM and high-density concrete was from tiny cracks generated from thermal stress. Moreover

  14. Highly Efficient and Robust Enantioselective Liquid-Liquid Extraction of 1,2-Amino Alcohols utilizing VAPOL- and VANOL-based Phosphoric Acid Hosts.

    Science.gov (United States)

    Pinxterhuis, Erik B; Gualtierotti, Jean-Baptiste; Wezenberg, Sander J; de Vries, Johannes G; Feringa, Ben L

    2018-01-10

    The large-scale production of enantiopure compounds in a cost-effective and environmentally friendly manner remains one of the major challenges of modern-day chemistry. The resolution of racemates through enantioselective liquid-liquid extraction was developed as a suitable solution but has remained largely underused, owing to a lack of highly efficient and robust chiral hosts to mediate the process. This paucity of hosts can in part be attributed to a poor understanding of the underlying principles behind these processes hindering the design of more efficient selectors. A previously untested class of hosts, VAPOL and VANOL derived phosphoric acids, has been studied in depth for the efficient enantioselective liquid-liquid extraction of 1,2-amino alcohols. A systematic investigation of extraction parameters was conducted, revealing many key interactions and DFT calculations illustrate the binding modes for the 1:1 complexes that are involved in chiral recognition. The resulting, now-optimized, procedures are highly robust and easy to implement. They are also easily scalable, as demonstrated by U-tube experiments. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. High-throughput liquid-absorption air-sampling apparatus and methods

    Science.gov (United States)

    Zaromb, Solomon

    2000-01-01

    A portable high-throughput liquid-absorption air sampler [PHTLAAS] has an asymmetric air inlet through which air is drawn upward by a small and light-weight centrifugal fan driven by a direct current motor that can be powered by a battery. The air inlet is so configured as to impart both rotational and downward components of motion to the sampled air near said inlet. The PHTLAAS comprises a glass tube of relatively small size through which air passes at a high rate in a swirling, highly turbulent motion, which facilitates rapid transfer of vapors and particulates to a liquid film covering the inner walls of the tube. The pressure drop through the glass tube is water, usually water. The sampler's collection efficiency is usually >20% for vapors or airborne particulates in the 2-3.mu. range and >50% for particles larger than 4.mu.. In conjunction with various analyzers, the PHTLAAS can serve to monitor a variety of hazardous or illicit airborne substances, such as lead-containing particulates, tritiated water vapor, biological aerosols, or traces of concealed drugs or explosives.

  16. Upgrade of the ATLAS Liquid Argon Calorimeters for the High-Luminosity LHC

    CERN Document Server

    McCarthy, Tom; The ATLAS collaboration

    2016-01-01

    The increased particle flux at the high luminosity phase of the Large Hadron Collider (HL-LHC), with instantaneous luminosities of up to 7.5 times the original design value, will have an impact on many sub-systems of the ATLAS detector. This contribution highlights the particular impacts on the ATLAS liquid argon calorimeter system, together with an overview of the various upgrade plans leading up to the HL-LHC. The higher luminosities are of particular importance for the forward calorimeters (FCal), where the expected increase in the ionization load poses a number of problems that can degrade the FCal performance such as beam heating and space-charge effects in the liquid argon gaps and high-voltage drop due to increased current drawn over the current-limiting resistors. A proposed FCal replacement as a way to counter some of these problems is weighed against the risks associated with the replacement. To further mitigate the effects of increased pile-up, the installation of a high-granularity timing detector...

  17. Polyatomic ions from a high current ion implanter driven by a liquid metal ion source.

    Science.gov (United States)

    Pilz, W; Laufer, P; Tajmar, M; Böttger, R; Bischoff, L

    2017-12-01

    High current liquid metal ion sources are well known and found their first application as field emission electric propulsion thrusters in space technology. The aim of this work is the adaption of such kind of sources in broad ion beam technology. Surface patterning based on self-organized nano-structures on, e.g., semiconductor materials formed by heavy mono- or polyatomic ion irradiation from liquid metal (alloy) ion sources (LMAISs) is a very promising technique. LMAISs are nearly the only type of sources delivering polyatomic ions from about half of the periodic table elements. To overcome the lack of only very small treated areas by applying a focused ion beam equipped with such sources, the technology taken from space propulsion systems was transferred into a large single-end ion implanter. The main component is an ion beam injector based on high current LMAISs combined with suited ion optics allocating ion currents in the μA range in a nearly parallel beam of a few mm in diameter. Different types of LMAIS (needle, porous emitter, and capillary) are presented and characterized. The ion beam injector design is specified as well as the implementation of this module into a 200 kV high current ion implanter operating at the HZDR Ion Beam Center. Finally, the obtained results of large area surface modification of Ge using polyatomic Bi 2 + ions at room temperature from a GaBi capillary LMAIS will be presented and discussed.

  18. Experimental investigation of high-frequency combustion instabilities in liquid rocket engine

    Science.gov (United States)

    Richecoeur, F.; Ducruix, S.; Scouflaire, P.; Candel, S.

    2008-01-01

    High-frequency instabilities in liquid propellant rocket engines are experimentally investigated in a model scale research facility. Liquid oxygen and gaseous methane are injected in the combustion chamber at 0.9 MPa through three coaxial injectors vertically aligned. High-amplitude transverse pressure fluctuations are generated in the chamber at frequencies above 1 kHz by a rotating toothed wheel actuator which periodically blocks an auxiliary lateral nozzle. The chamber eigenmodes are identified in a first stage by examining the response of the system to a linear frequency sweep. In a second stage the chamber is excited at the frequency corresponding to the first transverse (1T) mode. The effect of the pressure mode on combustion is observed with intensified and high-speed cameras. Photo-multipliers and pressure sensors are also used to characterize the system behavior and examine phase relations between the corresponding signals. Flame structure modifications observed for specific injection conditions correspond to a strong coupling between acoustics and combustion which notably modifies the flow dynamics, augments the flame expansion rate and enhances heat transfer to the wall.

  19. Determination of tetracycline antibiotics in fatty food samples by selective pressurized liquid extraction coupled with high-performance liquid chromatography and tandem mass spectrometry.

    Science.gov (United States)

    Jiao, Zhe; Zhang, Suling; Chen, Hongwei

    2015-01-01

    For the determination of trace residues of tetracycline antibiotics in fatty food samples, selective pressurized liquid extraction coupled with high-performance liquid chromatography and tandem mass spectrometry was applied in this study. Copper(II) isonicotinate was first used as online cleanup adsorbent in the selective pressurized liquid extraction process. The adsorbent to sample ratio, extraction temperature, extraction time, and recycle times, etc. were optimized. The tetracyclines in food samples of pork, chicken meat, and clam meat were detected by liquid chromatography with tandem mass spectrometry. Tetracycline was found at levels of 0.32 and 0.53 μg/g and oxytetracycline was found at 0.14 and 0.21 μg/g in chicken meat and clam meat, respectively, while chlorotetracycline and deoxytetracycline were below the detection limit. The detection limit (S/N = 3) for these four tetracyclines were from 0.2 to 3.3 ng/g, the recoveries were from 75.8 to 110.5%, and relative standard deviations were from 5.5 to 13.6%. Copper(II) isonicotinate showed a higher purification capacity than other cleanup adsorbents for extraction of antibiotics in fatty food and the recovery showed predominance compared with a pressurized liquid extraction method without adsorbent. The study demonstrated that copper(II) isonicotinate would be a promising cleanup adsorbent in pressurized liquid extraction for the analysis of trace organic pollutants in complicated samples. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Analysis of major antioxidants from extracts of Myrmecodia pendans by UV/visible spectrophotometer, liquid chromatography/tandem mass spectrometry, and high-performance liquid chromatography/UV techniques.

    Science.gov (United States)

    Engida, Adam Mekonnen; Faika, Sitti; Nguyen-Thi, Bich Thuyen; Ju, Yi-Hsu

    2015-06-01

    In the present work, heat reflux extraction with ethanol/water (80:20; v/v) as the solvent was used to extract antioxidants from Myrmecodia pendans. The crude extract (CE) was fractionated using hexane and ethyl acetate. Ethyl acetate fraction (EAF) and aqueous fraction were collected. Antioxidant activity against 1,1-diphenyl-2-picrylhydrazyl-radical radical and ferric reducing power of the CE, EAF, and aqueous fraction were evaluated. EAF showed comparable antioxidant activity against 1,1-diphenyl-2-picrylhydrazyl-radical radical and ferric reducing power to those of the CE. UV/visible, liquid chromatography/electrospray ionization/tandem mass spectrometry, and high-performance liquid chromatography were employed for identifying the major antioxidant compounds in the EAF. Three major phenolic compounds (rosmarinic acid, procyanidin B1, and polymer of procyanidin B1) were identified. The first two compounds were confirmed and quantified by high-performance liquid chromatography using authentic standards, but confirmation of the third compound was hampered by a lack of commercial standard. Concentrations of rosmarinic acid and procyanidin B1 in the EAF were found to be 20.688 ± 1.573 mg/g dry sample and 3.236 ± 0.280 mg/g dry sample, respectively. All these three compounds are reported for the first time in sarang semut. Copyright © 2014. Published by Elsevier B.V.

  1. Analysis of major antioxidants from extracts of Myrmecodia pendans by UV/visible spectrophotometer, liquid chromatography/tandem mass spectrometry, and high-performance liquid chromatography/UV techniques

    Directory of Open Access Journals (Sweden)

    Adam Mekonnen Engida

    2015-06-01

    Full Text Available In the present work, heat reflux extraction with ethanol/water (80:20; v/v as the solvent was used to extract antioxidants from Myrmecodia pendans. The crude extract (CE was fractionated using hexane and ethyl acetate. Ethyl acetate fraction (EAF and aqueous fraction were collected. Antioxidant activity against 1,1-diphenyl-2-picrylhydrazyl-radical radical and ferric reducing power of the CE, EAF, and aqueous fraction were evaluated. EAF showed comparable antioxidant activity against 1,1-diphenyl-2-picrylhydrazyl-radical radical and ferric reducing power to those of the CE. UV/visible, liquid chromatography/electrospray ionization/tandem mass spectrometry, and high-performance liquid chromatography were employed for identifying the major antioxidant compounds in the EAF. Three major phenolic compounds (rosmarinic acid, procyanidin B1, and polymer of procyanidin B1 were identified. The first two compounds were confirmed and quantified by high-performance liquid chromatography using authentic standards, but confirmation of the third compound was hampered by a lack of commercial standard. Concentrations of rosmarinic acid and procyanidin B1 in the EAF were found to be 20.688 ± 1.573 mg/g dry sample and 3.236 ± 0.280 mg/g dry sample, respectively. All these three compounds are reported for the first time in sarang semut.

  2. Ionic-liquid-assisted synthesis of nanostructured and carbon-coated Li3V2(PO4)3 for high-power electrochemical storage devices.

    Science.gov (United States)

    Zhang, Xiaofei; Böckenfeld, Nils; Berkemeier, Frank; Balducci, Andrea

    2014-06-01

    Carbon-coated Li3V2(PO4)3 (LVP) displaying nanostructured morphology can be easily prepared by using ionic-liquid-assisted sol-gel synthesis. The selection of highly viscous and thermally stable ionic liquids might promote the formation of nanostructures during the sol-gel synthesis. The presence of these structures shortens the diffusion paths and enlarges the contact area between the active material and the electrolyte; this leads to a significant improvement in lithium-ion diffusion. At the same time, the use of ionic liquids has a positive influence on the coating of the LVP particles, which improves the electronic conductivity of this material; this leads to enhanced charge-transfer properties. At a high current density of 40 C, the LVP/N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide material delivered a reversible capacity of approximately 100 mA h g(-1), and approximately 99 % of the initial capacity value was retained even after 100 cycles at 50 C. The excellent high rate and cycling stability performance make Li3V2(PO4)3 prepared by ionic-liquid-assisted sol-gel synthesis a very promising cathode material for high-power electrochemical storage devices. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Gas-phase polymerization of propylene with a highly active catalyst.

    NARCIS (Netherlands)

    Samson, J.J.C.; Samson, Job Jan C.; van Middelkoop, Bart; van Middelkoop, B.; Weickert, G.; Westerterp, K.R.

    1999-01-01

    The polymerization of propylene in the gas phase has been studied with the same high-activity catalyst as was used for liquid-phase polymerizations in earlier work. Catalyst injection, the influence of the support bed, and precontacting of the catalyst with the cocatalyst and the electron donor have

  4. LIQUID BIO-FUEL PRODUCTION FROM NON-FOOD BIOMASS VIA HIGH TEMPERATURE STEAM ELECTROLYSIS

    Energy Technology Data Exchange (ETDEWEB)

    G. L. Hawkes; J. E. O' Brien; M. G. McKellar

    2011-11-01

    Bio-Syntrolysis is a hybrid energy process that enables production of synthetic liquid fuels that are compatible with the existing conventional liquid transportation fuels infrastructure. Using biomass as a renewable carbon source, and supplemental hydrogen from high-temperature steam electrolysis (HTSE), bio-syntrolysis has the potential to provide a significant alternative petroleum source that could reduce US dependence on imported oil. Combining hydrogen from HTSE with CO from an oxygen-blown biomass gasifier yields syngas to be used as a feedstock for synthesis of liquid transportation fuels via a Fischer-Tropsch process. Conversion of syngas to liquid hydrocarbon fuels, using a biomass-based carbon source, expands the application of renewable energy beyond the grid to include transportation fuels. It can also contribute to grid stability associated with non-dispatchable power generation. The use of supplemental hydrogen from HTSE enables greater than 90% utilization of the biomass carbon content which is about 2.5 times higher than carbon utilization associated with traditional cellulosic ethanol production. If the electrical power source needed for HTSE is based on nuclear or renewable energy, the process is carbon neutral. INL has demonstrated improved biomass processing prior to gasification. Recyclable biomass in the form of crop residue or energy crops would serve as the feedstock for this process. A process model of syngas production using high temperature electrolysis and biomass gasification is presented. Process heat from the biomass gasifier is used to heat steam for the hydrogen production via the high temperature steam electrolysis process. Oxygen produced form the electrolysis process is used to control the oxidation rate in the oxygen-blown biomass gasifier. Based on the gasifier temperature, 94% to 95% of the carbon in the biomass becomes carbon monoxide in the syngas (carbon monoxide and hydrogen). Assuming the thermal efficiency of the power

  5. Electricity generation and nutrients removal from high-strength liquid manure by air-cathode microbial fuel cells.

    Science.gov (United States)

    Lin, Hongjian; Wu, Xiao; Nelson, Chad; Miller, Curtis; Zhu, Jun

    2016-01-01

    Air-cathode microbial fuel cells (MFCs) are widely tested to recover electrical energy from waste streams containing organic matter. When high-strength wastewater, such as liquid animal manure, is used as a medium, inhibition on anode and cathode catalysts potentially impairs the effectiveness of MFC performance in power generation and pollutant removal. This study evaluated possible inhibitive effects of liquid swine manure components on MFC power generation, improved liquid manure-fed MFCs performance by pretreatment (dilution and selective adsorption), and modeled the kinetics of organic matter and nutrients removal kinetics. Parameters monitored included pH, conductivity, chemical oxygen demand (COD), volatile fatty acids (VFAs), total ammoniacal nitrogen (TAN), nitrite, nitrate, and phosphate concentrations. The removals of VFA and TAN were efficient, indicated by the short half-life times of 4.99 and 7.84 d, respectively. The mechanism for phosphate decrease was principally the salt precipitation on cathode, but the removal was incomplete after 42-d operation. MFC with an external resistor of 2.2 kΩ and fed with swine wastewater generated relatively small power (28.2 μW), energy efficiency (0.37%) and Coulombic efficiency (1.5%). Dilution of swine wastewater dramatically improved the power generation as the inhibitory effect was decreased. Zeolite and granular activated carbon were effective in the selective adsorption of ammonia or organic matter in swine wastewater, and so substantially improved the power generation, energy efficiency, and Coulombic efficiency. A smaller external resistor in the circuit was also observed to promote the organic matter degradation and thus to shorten the treatment time. Overall, air-cathode MFCs are promising for generating electrical power from livestock wastewater and meanwhile reducing the level of organic matter and nutrients.

  6. [Measurement of 11 benzophenone ultraviolet-filters in cosmetics by high performance liquid chromatography].

    Science.gov (United States)

    Qu, Baocheng; Bian, Haitao; Mao, Xiqin; Li, Jin

    2015-12-01

    A sample preparation and analytical method with liquid-liquid extraction (LLE) and high performance liquid chromatography (HPLC) was developed to detect 11 benzophenone ultraviolet-filters in cosmetics. The target compounds were extracted by the mixed solutions of tetrahydrofuran (TH)/methanol/water or dichloromethane/water at proper ratios. The extracts were centrifuged and filtered to remove matrix compounds, and then analyzed by HPLC. The separation of analytes was carried out on a Diamonsil-C18 column (150 mm x 4.6 mm, 5 μm) with 0.1% (v/v) formic acid aqueous solution (containing 10 mmol/L ammonium acetate) as mobile phase A and methanol containing 0.1% (v/v) formic acid as mobile phase B. The spiked recoveries of the method (n = 7) were 93.4%-103.8% with the relative standard deviations of 0.1%-4.2%. The limits of detection (LODs) were in the range of 4.0-30 μg/g and the limits of quantitation (LOQs) ranged from 15 to 100 μg/g. The method was applied to the determination of 42 cosmetic samples randomly purchased from the supermarket in Dalian. Five benzophenone series were always detected, in which the content of benzophenone-3 in sunscreen cream and the content of benzophenone-2 in perfume were very high and reached 2 785 μg/g and 2 106 μg/g, respectively. The results showed that the developed method is efficient, reliable and sensitive, which can be applied to the determination of benzophenones in cosmetics.

  7. Development of high performance liquid chromatography method for miconazole analysis in powder sample

    Science.gov (United States)

    Hermawan, D.; Suwandri; Sulaeman, U.; Istiqomah, A.; Aboul-Enein, H. Y.

    2017-02-01

    A simple high performance liquid chromatography (HPLC) method has been developed in this study for the analysis of miconazole, an antifungal drug, in powder sample. The optimized HPLC system using C8 column was achieved using mobile phase composition containing methanol:water (85:15, v/v), a flow rate of 0.8 mL/min, and UV detection at 220 nm. The calibration graph was linear in the range from 10 to 50 mg/L with r 2 of 0.9983. The limit of detection (LOD) and limit of quantitation (LOQ) obtained were 2.24 mg/L and 7.47 mg/L, respectively. The present HPLC method is applicable for the determination of miconazole in the powder sample with a recovery of 101.28 % (RSD = 0.96%, n = 3). The developed HPLC method provides short analysis time, high reproducibility and high sensitivity.

  8. A high-power ultrasonic microreactor and its application in gas-liquid mass transfer intensification.

    Science.gov (United States)

    Dong, Zhengya; Yao, Chaoqun; Zhang, Xiaoli; Xu, Jie; Chen, Guangwen; Zhao, Yuchao; Yuan, Quan

    2015-02-21

    The combination of ultrasound and microreactor is an emerging and promising area, but the report of designing high-power ultrasonic microreactor (USMR) is still limited. This work presents a robust, high-power and highly efficient USMR by directly coupling a microreactor plate with a Langevin-type transducer. The USMR is designed as a longitudinal half wavelength resonator, for which the antinode plane of the highest sound intensity is located at the microreactor. According to one dimension design theory, numerical simulation and impedance analysis, a USMR with a maximum power of 100 W and a resonance frequency of 20 kHz was built. The strong and uniform sound field in the USMR was then applied to intensify gas-liquid mass transfer of slug flow in a microfluidic channel. Non-inertial cavitation with multiple surface wave oscillation was excited on the slug bubbles, enhancing the overall mass transfer coefficient by 3.3-5.7 times.

  9. High Resolution Temperature Measurement of Liquid Stainless Steel Using Hyperspectral Imaging

    Directory of Open Access Journals (Sweden)

    Wim Devesse

    2017-01-01

    Full Text Available A contactless temperature measurement system is presented based on a hyperspectral line camera that captures the spectra in the visible and near infrared (VNIR region of a large set of closely spaced points. The measured spectra are used in a nonlinear least squares optimization routine to calculate a one-dimensional temperature profile with high spatial resolution. Measurements of a liquid melt pool of AISI 316L stainless steel show that the system is able to determine the absolute temperatures with an accuracy of 10%. The measurements are made with a spatial resolution of 12 µm/pixel, justifying its use in applications where high temperature measurements with high spatial detail are desired, such as in the laser material processing and additive manufacturing fields.

  10. High-Density Liquid-State Machine Circuitry for Time-Series Forecasting.

    Science.gov (United States)

    Rosselló, Josep L; Alomar, Miquel L; Morro, Antoni; Oliver, Antoni; Canals, Vincent

    2016-08-01

    Spiking neural networks (SNN) are the last neural network generation that try to mimic the real behavior of biological neurons. Although most research in this area is done through software applications, it is in hardware implementations in which the intrinsic parallelism of these computing systems are more efficiently exploited. Liquid state machines (LSM) have arisen as a strategic technique to implement recurrent designs of SNN with a simple learning methodology. In this work, we show a new low-cost methodology to implement high-density LSM by using Boolean gates. The proposed method is based on the use of probabilistic computing concepts to reduce hardware requirements, thus considerably increasing the neuron count per chip. The result is a highly functional system that is applied to high-speed time series forecasting.

  11. Denaturing high performance liquid chromatography (DHPLC in detection of microsatellite instability

    Directory of Open Access Journals (Sweden)

    Metka Ravnik-Glavač

    2007-12-01

    Full Text Available Background: Microsatellite instability (MSI is a phenomenon characterized by small deletions or insertions within short tandem repeats in tumour DNA compared to matching normal DNA. MSI analysis is becoming more and more important for detection of hereditary non-polyposis colorectal cancer as well as for sporadic primary colorectal tumours with MSI high phenotype. Use of five quasimonomorphic mononucleotide markers eliminates ultimate need for analysis of germline DNA corresponding to tumour DNA. Here we discuss our method for MSI analysis using denaturating high performance liquid chromatography (DHPLC in combination with quasimonomorphic mononucleotide microsatellite markers in comparison with previously used methods. The method is high-throughput, accurate, quick and cost-effective and suitable for large-scale studies as well as for daily use with smaller numbers of samples.

  12. Pilot-scale waste activated sludge alkaline fermentation, fermentation liquid separation, and application of fermentation liquid to improve biological nutrient removal.

    Science.gov (United States)

    Li, Xiang; Chen, Hong; Hu, Lanfang; Yu, Lei; Chen, Yinguang; Gu, Guowei

    2011-03-01

    The use of sludge fermentative short-chain fatty acids (SCFA) as an additional carbon source of biological nutrient removal (BNR) has drawn much attention recently as it can reuse sludge organics, reduce waste activated sludge production, and improve BNR performance. Our previous laboratory study had shown that the SCFA production was significantly enhanced by controlling sludge fermentation at pH 10 with NaOH. This paper focused on a pilot-scale study of alkaline fermentation of waste activated sludge, separation of the fermentation liquid from the alkaline fermentation system, and application of the fermentation liquid to improve municipal biological nitrogen and phosphorus removal. NaOH and Ca(OH)(2) were used respectively to adjust the alkaline fermentation pH, and their effects on sludge fermentation and fermentation liquid separation were compared. The results showed that the use of Ca(OH)(2) had almost the same effect on SCFA production improvement and sludge volatile suspended solids reduction as that of NaOH, but it exhibited better sludge dewatering, lower chemical costs, and higher fermentation liquid recovery efficiency. When the fermentation liquids, adjusted with Ca(OH)(2) and NaOH respectively, were added continuously to an anaerobic-anoxic-aerobic municipal wastewater BNR system, both the nitrogen and phosphorus removals, compared with the control, were improved to the same levels. This was attributed to the increase of not only influent COD but also denitrifying phosphorus removal capability. It seems that the use of Ca(OH)(2) to control sludge fermentation at pH 10 for efficiently producing a carbon source for BNR is feasible.

  13. Ionic liquid-assisted synthesis of Br-modified g-C3N4 semiconductors with high surface area and highly porous structure for photoredox water splitting

    Science.gov (United States)

    Zhao, Shuo; Zhang, Yiwei; Wang, Yanyun; Zhou, Yuming; Qiu, Kaibo; Zhang, Chao; Fang, Jiasheng; Sheng, Xiaoli

    2017-12-01

    Coping with the gradually increasing worldwide energy and environmental issues, it is urgent to develop efficient, cheap and visible-light-driven photocatalysts for hydrogen production. Here, we present a facile way to synthesize bromine doped graphitic carbon nitride (CN-BrX) with highly porous structure by using ionic liquid (1-butyl-3-vinylimidazolium bromide) as the Br source and soft-template for the first time, which applied in hydrogen evolution under visible light irradiation. A systematic study is conducted on the optimization in the doping amount. The results find that the as-fabricated CN-BrX photocatalysts possess a uniform porous network with thin walls due to the release of volatile domains and decomposition of ionic liquids. The highly porous structure with the large surface area (≤150 m2/g) benefits the exposure of active sites. Moreover, the bromine modification and porous structure can narrow the band gap, enhance the transportation capability of photogenerated electrons, improve the optical and conductive properties of CN, thus contribute to an outstanding H2 evolution rate under visible light irradiation (120 μmol h-1), which is about 3.6 times higher than pure CN. This work provides a new insight for designing the novel g-C3N4 based photocatalysts for hydrogen production, CO2 conversion and environmental remediation.

  14. Tuning the morphology and structure of nanocarbons with activating agents for ultrafast ionic liquid-based supercapacitors

    Science.gov (United States)

    Cui, Yongpeng; Wang, Huanlei; Mao, Nan; Yu, Wenhua; Shi, Jing; Huang, Minghua; Liu, Wei; Chen, Shougang; Wang, Xin

    2017-09-01

    The increasing demand for supercapacitors with high energy and power density has attracted extensive attention in designing advanced carbon materials with high accessible surface area, hierarchical porosity, and 2D/3D morphology. Here, we report a new approach to tune the morphology and structure of the nanocarbons by using methyl cellulose as the precursor. Due to the varying effect of different activating agents, the interconnected sheet-like carbon with a high surface area of up to 2285 m2 g-1 and a thickness down to ∼4 nm can be obtained. These important characteristics make the nanocarbons demonstrate a high capacitance of 144 F g-1 at 1 A g-1 and 20 °C, and an excellent capacitance retention ratio of 64% at 100 A g-1 in ionic liquid. Because of the high fraction of meso/macropores for nanocarbons, an outstanding capacitance of 116 F g-1 can be achieved at 0 °C, with a high capacitance retention ratio of 39% at 100 A g-1. A high energy of 16-17 and 9-10 W h kg-1 can be maintained at 20 and 0 °C when the supercapacitor is charged in less than 1s. The excellent electrochemical response of nanocarbons suggests that the proposed preparation process is promising for developing advanced carbon electrodes.

  15. Rapid determination of gross alpha/beta activity in milk using liquid scintilation counter technique

    Directory of Open Access Journals (Sweden)

    Sas Daniel

    2016-01-01

    Full Text Available Rapid determination of gross alpha and beta emitters in milk by liquid scintillation counter is discussed. This method is based on direct addition of different types of milk into scintillation cocktail and therefore it is very promising for fast determination of alpha/beta activity due to direct alpha and beta separation, measurement in close 4p geometry and without sample treatment. The selected group of radionuclides was chosen with the respect to military significance, radio-toxicity, and possibility of potential misuse. As model radionuclides 241Am, 239Pu, and 90Sr were selected. The Liquid Scintilation Counter Hidex 300 SL equipped with triple-double-coincidence-ratio technique was used for sample measurement. The aim of the work was focused on comparison of different cocktails produced by Hidex and Perkin Elmer, choosing the best cocktail based on our measurement results and adjustment of its appropriate volume. Furthermore, the optimization of ratio between the volume of scintillation cocktail and the volume of urine was investigated with the respect to the model radionuclides. According to the obtained results, the efficiency for alpha emitters was greater than 85% and for beta, greater than 95%. The obtained results allowed this method to be used for rapid determination of gross alpha/beta activity in cases where time is an essence, such as first responders or mass-scale samples, where ordinary means suffer from lack of capacity or simply collapse under the onslaught.

  16. Characterisation of tryptic peptides of phosphorylated tyrosine hydroxylase by high-pressure liquid chromatography electrospray ionisation mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Graham, Mark E. [Molecular Structure and Detection Group, School of Environmental and Life Sciences, University of Newcastle, Callaghan, NSW 2308 (Australia); Dickson, Phillip W. [School of Biomedical Science, University of Newcastle, Callaghan, NSW 2308 (Australia); Dunkley, Peter R. [School of Biomedical Science, University of Newcastle, Callaghan, NSW 2308 (Australia); Nagy-Felsobuki, Ellak I. von [Molecular Structure and Detection Group, School of Environmental and Life Sciences, University of Newcastle, Callaghan, NSW 2308 (Australia)]. E-mail: ellak@newcastle.edu.au

    2005-03-01

    Tyrosine hydroxylase (TH) is involved in the biosynthesis of catecholamines and is activated by phosphorylation. Phosphorylated TH was analysed using high-pressure liquid chromatography combined with electrospray mass spectrometry (HPLC ESI-MS). Two mass scanning methods were used to detect tryptic cleavage products of TH. In the positive electrospray ionisation mode (ESI+), the peptides that contain the phosphorylation sites of TH were identified. In the alternative method, a phosphopeptide was detected in the negative electrospray ionisation mode (ESI-) using single ion monitoring in combination with a sequential ESI+ switching experiment. A raised baseline interfered with detection of hydrophilic peptides in ESI-, with the signal-to-noise ratio indicating that the method was operating near the limit of detection for a conventional electrospray source. The switching method improved the certainty of identification of phosphopeptides.

  17. Three-phase, liquid-phase microextraction combined with high performance liquid chromatography-fluorescence detection for the simultaneous determination of fluoxetine and norfluoxetine in human plasma.

    Science.gov (United States)

    de Freitas, Daniela Fernanda; Porto, Carlos Eduardo Dobrovolskin; Vieira, Elisabeth Pizzamiglio; de Siqueira, Maria Elisa Pereira Bastos

    2010-01-05

    A three-phase, liquid-phase microextraction using a hollow fibre (HF-LPME) combined with high performance liquid chromatography-fluorescence detection (HPLC-FL) was developed for the analysis of fluoxetine (FLX) and its active metabolite, norfluoxetine (NFLX), in human plasma. An HF-LPME system using a disposable 7-cm polypropylene porous hollow fibre, 5 mL of alkaline plasma solution (donor phase), n-hexyl ether (extraction solvent) and 20 mM hydrochloric acid (acceptor phase) was used in the extraction. The method was validated after optimisation of several parameters that influence LPME efficiency. A reverse-phase LiChrospher 60 RP-Select B column (125 mm x 4 mm, 5 microm particle size) was used with 0.005 M sodium acetate buffer (pH 4.5) and acetonitrile at a 50:50 (v/v) as the mobile phase at a flow rate of 0.6 mL min(-1). In these conditions satisfactory chromatographic resolution and efficiency for the analytes were obtained. Fluorescence detection at 230 nm excitation wavelength and 290 nm emission wavelength was performed. Linearity over a range of 5-500 ng mL(-1), with determination coefficients (R(2)) of 0.9999 and 0.9962 for FLX and NFLX, respectively, was established. Venlafaxine was used as the internal standard for both analytes. Extraction recoveries from plasma samples were 70.9% for FLX and 59.7% for NFLX. The intra-day coefficients of variation (CVs) were below 5.4%, and inter-day CVs were below 13.0%, for both analytes at concentrations of 20, 80 and 160 ng mL(-1). HF-LPME extraction followed by HPLC-FL detection for FLX and NFLX analyses demonstrated excellent sample clean-up and selectivity. This method was simple, cheap, and easy to perform, yielding substantial analytes enrichment. The method was applied to the analysis of samples from 12 patients under fluoxetine treatment and proved suitable for routine therapeutic drug monitoring for this antidepressant.

  18. Enclosure for handling high activity materials

    Energy Technology Data Exchange (ETDEWEB)

    Jimeno de Osso, F.

    1977-07-01

    One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

  19. Activity coefficients at infinite dilution measurements for organic solutes and water in the ionic liquid 1-ethyl-3-methylimidazolium trifluoroacetate.

    Science.gov (United States)

    Domańska, Urszula; Marciniak, Andrzej

    2007-10-18

    The activity coefficients at infinite dilution, gamma13(infinity) for 29 solutes, alkanes, alkenes, alkynes, cycloalkanes, aromatic hydrocarbons, alcohols and water in the ionic liquid 1-ethyl-3-methylimidazolium trifluoroacetate ([EMIM][TFA]), were determined by gas-liquid chromatography at temperatures from 298.15-368.15 K. The partial molar excess enthalpies at infinite dilution DeltaH1(E,infinity) values were calculated from the experimental gamma13(infinity) values obtained over the temperature range. The selectivities for the hexane/benzene and cyclohexane/benzene separation were calculated from gamma13(infinity) and compared to the literature values for other ionic liquids, NMP and sulfolane.

  20. Formation of radical and active chemical species in electrical discharge plasma in the presence of liquid water

    Energy Technology Data Exchange (ETDEWEB)

    Locke, B.R.; Shih, K.Y.; Burlica, R. [Florida State Univ., Tallahassee, FL (United States). Dept. of Chemical and Biomedical Engineering

    2010-07-01

    This study investigated the interactions of plasma with liquid water using a combination of emission spectroscopy of radical and atomic species and direct measurements of more stable chemical compounds. The study focused on electrical discharge plasma formed directly in liquid water and on discharges formed in the gas phase above liquid water, in bubbles in liquid water, and in the gas phase with water droplet spray that result in a variety of active chemical species that can be used for pollution control as well as other applications in biomedical and materials engineering. The purpose was to improve the design and operation of plasma reactors for a variety of applications. This presentation also reviewed the mechanisms for the formation of active chemical species such as hydroxyl and other radicals, hydrogen peroxide and molecular hydrogen, in electrical discharge plasma formed in the presence of water.