Market penetration of intersection AEB: Characterizing avoided and residual straight crossing path accidents.

Science.gov (United States)

Sander, Ulrich; Lubbe, Nils

2018-06-01

Car occupants account for one third of all junction fatalities in the European Union. Driver warning can reduce intersection accidents by up to 50 percent; adding Autonomous Emergency Braking (AEB) delivers a reduction of up to 70 percent. However, these findings are based on an assumed 100 percent equipment rate, which may take decades to achieve. Our study investigates the relationship between intersection AEB market penetration rates and avoidance of accidents and injuries in order to guide implementation strategies. Additionally, residual accident characteristics (impact configurations and severity) are analyzed to provide a basis for future in-crash protection requirements. We determined which accidents would have been avoided through the use of an Intersection AEB system with different sensor field-of-views (180° and 120°) by means of re-simulating the pre-crash phase of 792 straight crossing path (SCP) car-to-car accidents recorded in the German In-Depth Accident Study (GIDAS) and the associated Pre-Crash Matrix (PCM). Intersection AEB was activated when neither of the conflict opponents could avoid the crash through reasonable braking or steering reactions. For not-avoided accidents, we used the Kudlich-Slibar rigid body impulse model to calculate the change of velocity during the impact as a measure of impact severity and the principal direction of force. Accident avoidance over market penetration is not linear but exponential, with higher gains at low penetration rates and lower gains at higher rates. A wide field-of-view sensor (180°) substantially increased accident avoidance and injury mitigation rates compared to a 120° field-of-view sensor. For a 180° field-of-view sensor at 100 percent market penetration, about 80 percent of the accidents and 90 percent of the MAIS2 + F injuries could be avoided. For the remaining accidents, AEB intervention rarely affected side of impact. The median change of velocity (delta-V) of the remaining crashes

Analytical and experimental studies on the strain rate effects in penetration of 10wt % ballistic gelatin

International Nuclear Information System (INIS)

Liu, L; Jia, Z; Ma, X L; Fan, Y R

2013-01-01

This work concentrates on modeling the super-elastic behavior of 10wt% ballistic gelatin at 4°C and the mechanical responses at quasi-static and high-speed penetrations. Uniaxial compression and simple shearing experiments were carried out to determine the moduli in Mooney-Rivlin model describing the elastic behavior of gelatin at low strain rates. The failure mode is determined to be elastic fracture as the tensile stretch ratio exceeds a critical value. For high compression strain rates, the available results from the split Hopkinson pressure bar (SHPB) experiments for 10wt% gelatin were carefully examined and assessed. Linear relationship between the moduli and the strain rate is established. Based on these material parameters, an analytic solution of stress for the quasi-static and quasi-dynamic expansion of spherical cavity in gelatin is derived. As a consequence, the work needed to open unit volume of cavity, P s , which is the key parameter in studying penetration problems, is linearly increasing with the characteristic strain rate. The application of P s to our quasi-static and high-speed penetration experiments is discussed and assessed

Factors Affecting the Rate of Penetration of Large-Scale Electricity Technologies: The Case of Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

James R. McFarland; Howard J. Herzog

2007-05-14

This project falls under the Technology Innovation and Diffusion topic of the Integrated Assessment of Climate Change Research Program. The objective was to better understand the critical variables that affect the rate of penetration of large-scale electricity technologies in order to improve their representation in integrated assessment models. We conducted this research in six integrated tasks. In our first two tasks, we identified potential factors that affect penetration rates through discussions with modeling groups and through case studies of historical precedent. In the next three tasks, we investigated in detail three potential sets of critical factors: industrial conditions, resource conditions, and regulatory/environmental considerations. Research to assess the significance and relative importance of these factors involved the development of a microeconomic, system dynamics model of the US electric power sector. Finally, we implemented the penetration rate models in an integrated assessment model. While the focus of this effort is on carbon capture and sequestration technologies, much of the work will be applicable to other large-scale energy conversion technologies.

Penetrating performance and “self-sharpening” behavior of fine-grained tungsten heavy alloy rod penetrators

Energy Technology Data Exchange (ETDEWEB)

Luo, Rongmei, E-mail: luorm_1999@126.com [School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu (China); College of Equipment Engineering, Shenyang Ligong University, Shenyang 110159, Liaoning (China); Huang, Dewu; Yang, Mingchuan; Tang, Enling; Wang, Meng; He, Liping [College of Equipment Engineering, Shenyang Ligong University, Shenyang 110159, Liaoning (China)

2016-10-15

Rod penetrators with 95W–3.75Ni–1.25Fe fine-grained tungsten heavy alloy (fine-grained 95W) and conventional tungsten heavy alloy rod penetrators with the same chemical composition (conventional 95W) were subjected to ballistic impact to compare their penetration performance. “Self-sharpening” behavior and an average 10.5% increase in penetration depth compared to conventional 95W penetrators. An acute head remained on the fine-grained 95W rod with SEM results revealing many micro-cracks and small debris on surface layer of the rod head. The stress-strain curves collected in the Split Hopkinson Pressure Bar (SHPB) experiment showed that critical failure strain values of the fine-grained 95W were 0.12 and 0.39 at strain rate of 2×10{sup 3} s{sup −1} and 3.9×10{sup 3} s{sup −1}, respectively, approximately 40% and 10% lower than those of the conventional 95W. The dynamic strength values of fine-grained 95W were 2100 MPa and 2520 MPa, respectively, which were 500 MPa and 520 MPa higher than those of the conventional 95W. The relationship among microstructure, mechanical property and “self-sharpening” behavior of fine-grained 95W is discussed in this work.

Percutaneous penetration studies for risk assessment

DEFF Research Database (Denmark)

Sartorelli, Vittorio; Andersen, Helle Raun; Angerer, Jürgen

2000-01-01

. In order to predict the systemic risk of dermally absorbed chemicals and to enable agencies to set safety standards, data is needed on the rates of percutaneous penetration of important chemicals. Standardization of in vitro tests and comparison of their results with the in vivo data could produce...... internationally accepted penetration rates and/or absorption percentages very useful for regulatory toxicology. The work of the Percutaneous Penetration Subgroup of EC Dermal Exposure Network has been focussed on the standardization and validation of in vitro experiments, necessary to obtain internationally...... accepted penetration rates for regulatory purposes. The members of the Subgroup analyzed the guidelines on percutaneous penetration in vitro studies presented by various organizations and suggested a standardization of in vitro models for percutaneous penetration taking into account their individual...

Verification of Sulfate Attack Penetration Rates for Saltstone Disposal Unit Modeling

Energy Technology Data Exchange (ETDEWEB)

Flach, G. P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2015-05-12

Recent Special Analysis modeling of Saltstone Disposal Units consider sulfate attack on concrete and utilize degradation rates estimated from Cementitious Barriers Partnership software simulations. This study provides an independent verification of those simulation results using an alternative analysis method and an independent characterization data source. The sulfate penetration depths estimated herein are similar to the best-estimate values in SRNL-STI-2013-00118 Rev. 2 and well below the nominal values subsequently used to define Saltstone Special Analysis base cases.

Effect of compressibility on the hypervelocity penetration

Science.gov (United States)

Song, W. J.; Chen, X. W.; Chen, P.

2018-02-01

We further consider the effect of rod strength by employing the compressible penetration model to study the effect of compressibility on hypervelocity penetration. Meanwhile, we define different instances of penetration efficiency in various modified models and compare these penetration efficiencies to identify the effects of different factors in the compressible model. To systematically discuss the effect of compressibility in different metallic rod-target combinations, we construct three cases, i.e., the penetrations by the more compressible rod into the less compressible target, rod into the analogously compressible target, and the less compressible rod into the more compressible target. The effects of volumetric strain, internal energy, and strength on the penetration efficiency are analyzed simultaneously. It indicates that the compressibility of the rod and target increases the pressure at the rod/target interface. The more compressible rod/target has larger volumetric strain and higher internal energy. Both the larger volumetric strain and higher strength enhance the penetration or anti-penetration ability. On the other hand, the higher internal energy weakens the penetration or anti-penetration ability. The two trends conflict, but the volumetric strain dominates in the variation of the penetration efficiency, which would not approach the hydrodynamic limit if the rod and target are not analogously compressible. However, if the compressibility of the rod and target is analogous, it has little effect on the penetration efficiency.

Penetration, Post-penetration Development, and Reproduction of Meloidogyne incognita on Cucumis melo var. texanus.

Science.gov (United States)

Faske, T R

2013-03-01

Cucumis melo var. texanus, a wild melon commonly found in the southern United States and two accessions, Burleson Co. and MX 1230, expressed resistance to Meloidogyne incognita in preliminary experiments. To characterize the mechanism of resistance, we evaluated root penetration, post-penetration development, reproduction, and emigration of M. incognita on these two accessions of C. melo var. texanus. Additionally, we evaluated 22 accessions of C. melo var. texanus for their reaction against M. incognita in a greenhouse experiment. Fewer (P ≤ 0.05) J2 penetrated the root system of C. melo var. texanus accessions (Burleson Co. and MX 1230) and C. metuliferus (PI 482452) (resistant control), 7 days after inoculation (DAI) than in C. melo 'Hales Best Jumbo' (susceptible control). A delayed (P ≤ 0.05) rate of nematode development was observed at 7, 14, and 21 DAI that contributed to lower (P ≤ 0.05) egg production on both accessions and C. metuliferus compared with C. melo. Though J2 emigration was observed on all Cucumis genotypes a higher (P ≤ 0.05) rate of J2 emigration was observed from 3 to 6 DAI on accession Burleson Co. and C. metuliferus than on C. melo. The 22 accessions of C. melo var. texanus varied relative to their reaction to M. incognita with eight supporting similar levels of nematode reproduction to that of C. metuliferus. Cucumis melo var. texanus may be a useful source of resistance against root-knot nematode in melon.

Optimized support vector regression for drilling rate of penetration estimation

Science.gov (United States)

Bodaghi, Asadollah; Ansari, Hamid Reza; Gholami, Mahsa

2015-12-01

In the petroleum industry, drilling optimization involves the selection of operating conditions for achieving the desired depth with the minimum expenditure while requirements of personal safety, environment protection, adequate information of penetrated formations and productivity are fulfilled. Since drilling optimization is highly dependent on the rate of penetration (ROP), estimation of this parameter is of great importance during well planning. In this research, a novel approach called `optimized support vector regression' is employed for making a formulation between input variables and ROP. Algorithms used for optimizing the support vector regression are the genetic algorithm (GA) and the cuckoo search algorithm (CS). Optimization implementation improved the support vector regression performance by virtue of selecting proper values for its parameters. In order to evaluate the ability of optimization algorithms in enhancing SVR performance, their results were compared to the hybrid of pattern search and grid search (HPG) which is conventionally employed for optimizing SVR. The results demonstrated that the CS algorithm achieved further improvement on prediction accuracy of SVR compared to the GA and HPG as well. Moreover, the predictive model derived from back propagation neural network (BPNN), which is the traditional approach for estimating ROP, is selected for comparisons with CSSVR. The comparative results revealed the superiority of CSSVR. This study inferred that CSSVR is a viable option for precise estimation of ROP.

A Study on Factors Affecting Airborne LiDAR Penetration

Directory of Open Access Journals (Sweden)

Wei-Chen Hsu

2015-01-01

Full Text Available This study uses data from different periods, areas and parameters of airborne LiDAR (light detection and ranging surveys to understand the factors that influence airborne LiDAR penetration rate. A discussion is presented on the relationships between these factors and LiDAR penetration rate. The results show that the flight height above ground level (AGL does not have any relationship with the penetration rate. There are some factors that should have larger influence. For example, the laser is affected by a wet ground surface by reducing the number of return echoes. The field of view (FOV has a slightly negative correlation with the penetration rate, which indicates that the laser incidence angle close to zero should achieve the best penetration. The vegetation cover rate also shows a negative correlation with the penetration rate, thus bare ground and reduced vegetation in the aftermath of a typhoon also cause high penetration rate. More return echoes could be extracted from the full-waveform system, thereby effectively improving the penetration rate. This study shows that full-waveform LiDAR is an effective method for increasing the number of surface reflected echoes. This study suggests avoiding LiDAR survey employment directly following precipitation to prevent laser echo reduction.

Evaluating the effect of exchange rate and labor productivity on import penetration of Brazilian manufacturing sectors

Directory of Open Access Journals (Sweden)

João Paulo Martin Faleiros

2016-01-01

Full Text Available In recent years, several economists have argued that the sharp loss of competitiveness of the Brazilian industry was caused by a strong exchange rate appreciation. However, other economists have attributed this loss of competitiveness to the dismal growth of labor productivity in the Brazilian industrial sector. The present paper proposes to estimate the differential impacts of variations in exchange rate and labor productivity on the Brazilian market share of imports measured by the coefficient of import penetration of total demand for manufacturing goods. We start by developing a simple theoretical model to investigate under what conditions the impacts of an exchange rate depreciation and an increase in labor productivity would differ. We test the theoretical implications of the model by means of a GMM panel data analysis focusing on 17 manufacturing sectors in the period between 1996 and 2011. Our results suggest that both variables matter to explain the coefficient of import penetration. Nevertheless, labor productivity has the strongest negative impact on the market share of imported goods, even after controlling for sector fixed-effects.

A review of penetration mechanisms and dynamic properties of tungsten and depleted uranium penetrators

International Nuclear Information System (INIS)

Andrew, S.P.; Caligiuri, R.D.; Eiselstein, L.E.

1991-01-01

Over the last decade, depleted uranium (DU) and tungsten alloys have been the materials of choice for kinetic energy penetrators. However, despite improvements in mechanical properties in recent years, the penetration performance of tungsten still lags behind that of DU. One possible reason is the difference in deformation mechanisms- DU alloys tend to shear band as they penetrate the target material, whereas tungsten penetrators tend to mushroom. As a first step to determining whether shear banding is truly the reason for superior DU performance, a review and summary of the available information was performed. This paper presents a state-of-the-art review of the formulation, high strain- rate properties, and penetration phenomena of penetrators manufactured from both tungsten and DU alloys. Specifically, the effects of composition, processing, and heat treatment on mechanical properties and penetration mechanisms of these alloys are discussed. Penetration data and models for penetration mechanisms (in particular shear banding) are also presented, as well as the applicability of these models and their salient features

A review of penetration mechanisms and dynamic properties of tungsten and depleted uranium penetrators

International Nuclear Information System (INIS)

Andrew, S.P.; Caligiuri, R.D.; Eiselstein, L.E.

1991-01-01

Kinetic energy penetrators must posses the best possible combination of hardness, stiffness, strength, and fracture toughness characteristics to be effective against modern armor systems. Over the last decade, depleted uranium (DU) and tungsten alloys have been the materials of choice for kinetic energy penetrators. Du and tungsten perform abut the same against semi-infinite targets, and DU outperforms tungsten penetrators in oblique, spaced array targets, but because of environmental and subsequent cost concerns, effort has focused on improving the performance of tungsten penetrators over the last few years. However, despite recent improvements in material properties, the penetration performance of tungsten still lags behind that of DU. One possible reason is the difference in deformation mechanisms at the leading edge of the penetrator during the penetration process-DU alloys tend to shear band and sharpen as they penetrate the target material, whereas tungsten penetrators tend to mushroom and blunt. As a first step to determine whether shear banding is truly the reason for superior DU performance, a review of the fabrication, high strain-rate properties, and penetration phenomena of penetrators manufactured from both tungsten and DU alloys. Specifically, the effects of composition, processing, and heat treatment on material properties and penetration mechanisms of these alloys are discussed

[Our experience in the cases with penetrating colonic injuries].

Science.gov (United States)

Kahya, Mehmet Cemal; Derici, Hayrullah; Cin, Necat; Tatar, Fatma; Peker, Yasin; Genç, Hüdai; Deniz, Vedat; Reyhan, Enver

2006-07-01

In this study, the factors that effect the morbidity and mortality in patients with penetrating colonic injuries were evaluated. Fourty-two patients (37 males, 5 females; mean age 30,1; range 14 to 63 years) with penetrating colonic trauma were evaluated according to age, gender, type of penetrating trauma, location and severity of the colonic injury, associated injury, interval between the trauma and the definitive operation, hemodynamic status, blood transfusion requirement, fecal contamination, surgical procedure, postoperative complication and mortality. Type of the penetrating trauma was stab injury in twenty-eight (67%) patients, and gunshot injury in fourteen (33%) patients. The mean Colon Injury Severity Score was 2,1. The mean Abdominal Trauma Index (ATI) was 17,2 and it was over than 25 in eight (19%) patients. The symptoms of shock were present in eleven (26%) patients at admission. Blood transfusions were applied in sixteen (38%) patients. In twenty-one patients intraabdominal bleeding was observed and it was more than 500 mL in eleven (26%) patients. Primary repair was performed in 36 (86%) of the 42 patients and colostomy was performed in six (14%) patients. Morbidity and mortality rates were 41% and 10% respectively. It was found that morbidity rates were increased in patients with ATI score higher than 25, and mortality rates were increased in patients presenting shock at admission, with the amount of intraabdominal blood more than 500 mL, and who needed three or more units of blood transfusion. The primary repair of the penetrating colon trauma can be performed confidently in the hemodynamically stable patients with ATI score less than 25.

Assessing high wind energy penetration

DEFF Research Database (Denmark)

Tande, J.O.

1995-01-01

In order to convincingly promote installing wind power capacity as a substantial part of the energy supply system, a set of careful analyses must be undertaken. This paper applies a case study concentrated on assessing the cost/benefit of high wind energy penetration. The case study considers...... expanding the grid connected wind power capacity in Praia, the capital of Cape Verde. The currently installed 1 MW of wind power is estimated to supply close to 10% of the electric energy consumption in 1996. Increasing the wind energy penetration to a higher level is considered viable as the project...... with the existing wind power, supply over 30% of the electric consumption in 1996. Applying the recommended practices for estimating the cost of wind energy, the life-cycle cost of this 2.4 MW investment is estimated at a 7% discount rate and a 20 year lifetime to 0.26 DKK/kW h....

Melting Penetration Simulation of Fe-U System at High Temperature Using MPS-LER

International Nuclear Information System (INIS)

Mustari, A P A; Irwanto, Dwi; Yamaji, A

2016-01-01

Melting penetration information of Fe-U system is necessary for simulating the molten core behavior during severe accident in nuclear power plants. For Fe-U system, the information is mainly obtained from experiment, i.e. TREAT experiment. However, there is no reported data on SS304 at temperature above 1350°C. The MPS-LER has been developed and validated to simulate melting penetration on Fe-U system. The MPS-LER modelled the eutectic phenomenon by solving the diffusion process and by applying the binary phase diagram criteria. This study simulates the melting penetration of the system at higher temperature using MPS-LER. Simulations were conducted on SS304 at 1400, 1450 and 1500°C. The simulation results show rapid increase of melting penetration rate. (paper)

Pre-hospital transport times and survival for Hypotensive patients with penetrating thoracic trauma

Directory of Open Access Journals (Sweden)

Mamta Swaroop

2013-01-01

Full Text Available Background: Achieving definitive care within the "Golden Hour" by minimizing response times is a consistent goal of regional trauma systems . This study hypothesizes that in urban Level I Trauma Centers, shorter pre-hospital times would predict outcomes in penetrating thoracic injuries. Materials and Methods: A retrospective cohort study was performed using a statewide trauma registry for the years 1999-2003 . Total pre-hospital times were measured for urban victims of penetrating thoracic trauma. Crude and adjusted mortality rates were compared by pre-hospital time using STATA statistical software. Results: During the study period, 908 patients presented to the hospital after penetrating thoracic trauma, with 79% surviving . Patients with higher injury severity scores (ISS were transported more quickly. Injury severity scores (ISS ≥16 and emergency department (ED hypotension (systolic blood pressure, SBP <90 strongly predicted mortality (P < 0.05 for each . In a logistic regression model including age, race, and ISS, longer transport times for hypotensive patients were associated with higher mortality rates (all P values <0.05. This was seen most significantly when comparing patient transport times 0-15 min and 46-60 min (P < 0.001. Conclusion: In victims of penetrating thoracic trauma, more severely injured patients arrive at urban trauma centers sooner . Mortality is strongly predicted by injury severity, although shorter pre-hospital times are associated with improved survival . These results suggest that careful planning to optimize transport time-encompassing hospital capacity and existing resources, traffic patterns, and trauma incident densities may be beneficial in areas with a high burden of penetrating trauma.

Modelling of chloride penetration in concrete under wet/dry cycle

Directory of Open Access Journals (Sweden)

Hong Sung-In

2017-01-01

Full Text Available This present study concerns modelling of chloride penetration in partially saturated concrete. To mimic the intermittent exposure of sea water to concrete, varying environmental conditions for relative humidity and chloride concentration were considered. As for the moisture distribution in concrete, statistical permeability model based on pore size distribution was used to represent influence of material properties on moisture transport. Then, a combined chloride diffusion and convection was modelled in variation of moisture level in concrete. As a result, smaller relative wet duration induces higher rate of chloride penetration due to enhanced moisture permeability from the surface, and also higher concentration gradient near the surface of concrete due to repeated wet/dry cycle. This implies that only diffusion analysis on chloride induced corrosion in concrete structure may underestimate the serviceability in given material performance.

Estimation of the potential fertility based upon non-return rates of bulls: using polyacrylamide gel instead of cervical mucus in the sperm penetration test.

Science.gov (United States)

Taş, M; Bacinoglu, S; Cirit, U; Ozgümüş, S; Kaşgöz, H; Pabuccuoğlu, S

2007-10-15

In the present study, we aimed to develop a polyacrylamide gel that could be used instead of bovine cervical mucus in the cervical mucus penetration test (CMPT) to obtain coherent and replicable results in bulls. The frozen semen samples of six Holstein bulls, which were divided into two fertility groups as low and high according to their non-return rate (NRR), were used. In this study, the modified CMPT (mCMPT) was carried out within 0.25 mL transparent plastic straws with an inner diameter 1.7 mm. The penetration ability of spermatozoa to bovine cervical mucus and to polyacrylamide gels swollen with two different solutions [NaCl (G1) and PBS (G2)] was compared. For the penetration test, the straws filled with cervical mucus and both gels were dipped into thawed semen samples and incubated at 37 degrees C for 15 min. After the incubation, straws were frozen in liquid nitrogen vapour and stored at -20 degrees C. On the evaluation day, the frozen straws were cut at 1.5-1.75 cm (penetration distance range=PDR1), 3.25-3.5 cm (PDR2) and 5.0-5.25 cm (PDR3), beginning from open-end of the straws. The separated frozen parts were then immediately transferred onto special counting slides by pushing with a mandrel and left to thaw. Thawed samples were covered with cover glass and penetrated spermatozoa in these parts were counted. The relation between the results and fertility of bulls was determined. In the tests performed using mucus, the number of spermatozoa determined in the high fertility group was found to be higher at PDR3 (p<0.0001) compared to the low fertility group, while in G1 spermatozoa number was significantly higher at PDR1 and PDR3 (p<0.0001). However, in G2 medium, no significant difference was observed between either of the fertility groups with respect to spermatozoa number determined at all distance ranges. In the study, we have determined that the gel swollen with NaCl produces better results and this gel can be used instead of bovine cervical mucus

Systems and rates of aerial application of fungicides in irrigated rice

Directory of Open Access Journals (Sweden)

Tânia Bayer

Full Text Available ABSTRACT The present research studied the performance of flat-fan and hollow-cone nozzles, with application rates of 20 and 30 L ha-1, and rotary disc atomizer with application rates of 10 and 15 L ha-1. The test was conducted with a fungicide spray tank composed of Azoxystrobin + Difenoconazole, in which the density and penetration of droplets into the canopy were evaluated using a water-sensitive paper and the distribution of the active ingredients in the plant was evaluated through the chromatographic analysis. Higher application rates resulted in higher droplet density in the upper stratum of plants. In all treatments, the penetration of the droplets was 26% into the middle stratum and 23% into the lower stratum, in relation to the top of the crop, resulting in an average 25% penetration of droplets into the leaf canopy. The active ingredients were distributed in greater quantity in the upper stratum of the plant. For the same weight, the upper part of the ‘Puitá Inta CL’ rice cultivar has a leaf area 6.4 times larger than the lower part. It was concluded that higher application rate leads to higher droplet density in the upper stratum of the leaf canopy and that all systems and application rates promoted similar penetration of droplets into the canopy.

High-velocity Penetration of Concrete Targets with Three Types of Projectiles: Experiments and Analysis

Directory of Open Access Journals (Sweden)

Shuang Zhang

Full Text Available Abstract This study conducted high-velocity penetration experiments using conventional ogive-nose, double-ogive-nose, and grooved-tapered projectiles of approximately 2.5 kg and initial velocities between 1000 and 1360 m/s to penetrate or perforate concrete targets with unconfined compressive strengths of nominally 40MPa. The penetration performance data of these three types of projectiles with two different types of materials (i.e., AerMet100 and DT300 were obtained. The crater depth model considering both the projectile mass and the initial velocity was proposed based on the test results and a theoretical analysis. The penetration ability and the trajectory stability of these three projectile types were compared and analyzed accordingly. The results showed that, under these experimental conditions, the effects of these two different kinds of projectile materials on the penetration depth and mass erosion rate of projectile were not obvious. The existing models could not reflect the crater depths for projectiles of greater weights or higher velocities, whereas the new model established in this study was reliable. The double-ogive-nose has a certain effect of drag reduction. Thus, the double-ogive-nose projectile has a higher penetration ability than the conventional ogive-nose projectile. Meanwhile, the grooved-tapered projectile has a better trajectory stability, because the convex parts of tapered shank generated the restoring moment to stabilize the trajectory.

Deformation analysis of shallow penetration in clay

Science.gov (United States)

Sagaseta, C.; Whittle, A. J.; Santagata, M.

1997-10-01

A new method of analysis is described for estimating the deformations and strains caused by shallow undrained penetration of piles and caissons in clay. The formulation combines previous analyses for steady, deep penetration, with methods used to compute soil deformations due to near-surface ground loss, and is referred to as the Shallow Strain Path Method (SSPM). Complete analytical solutions for the velocity and strain rates are given for a planar wall, an axisymmetric, closed-ended pile and unplugged, open-ended pile geometries. In these examples, the analyses consider a single source penetrating through the soil at a constant rate, generating a family of penetrometers with rounded tips, referred to as simple wall, pile and tube geometries. Soil deformations and strains are obtained by integrating the velocity and strain rates along the particle paths.The transition from shallow to deep penetration is analysed in detail. Shallow penetration causes heave at the ground surface, while settlements occur only in a thin veneer of material adjacent to the shaft and in a bulb-shaped region around the tip. The size of this region increases with the embedment depth. Deformations inside an open-ended pile/caisson are affected significantly by details of the simple tube wall geometry.

Control of penetration zone GMAW

Directory of Open Access Journals (Sweden)

Віталій Петрович Iванов

2016-11-01

Full Text Available Thermal properties of the base metal, shielding medium and the nature of the electrode metal transfer to a great extent determine the penetration area formation in gas-arc welding. It is not always possible to take into account the influence of these factors on penetration front forming within the existing models. The aim of the work was to research the penetration area forming in gas-arc welding. The research of the penetration area forming in gas-arc welding of CrNi austenitic steels was made. The parameters of the regime as well as the kind of the gaseous medium influence on the formation of the penetration zone were studied. The article shows a linear proportional relationship between the electrode feed rate and the size of the base metal plate. The penetration area formation mode for welding in argon and carbon dioxide have been worked out. Diameter, feed rate and the speed of the electrode movement have been chosen as the main input parameters. Multiple regression analysis method was used to make up the modes. The relations of the third order that make it possible to take into account the electrode metal transfer and thermal properties change of the materials to be welded were used. These relationships show quite good agreement with the experimental measurements in the calculation of the fusion zone shape with consumable electrode in argon and carbon dioxide. It was determined that the shape of the melting front curve can be shown as a generalized function in which the front motion parameters depend on feed rate and the diameter of the electrode. Penetration zone growth time is determined by the welding speed and is calculated as a discrete function of the distance from the electrode with the spacing along the movement coordinate. The influence of the mode parameters on the formation of the fusion zone has been investigated and the ways to manage and stabilize the weld pool formation have been identified. The modes can be used to develop

Study on Penetration Characteristics of Tungsten Cylindrical Penetrator

Energy Technology Data Exchange (ETDEWEB)

Jo, Jong Hyun; Lee, Young Shin; Kim, Jae Hoon [Chungnam Nat' l Univ., Daejeon (Korea, Republic of); Bae, Yong Woon [Agency for Defense Development, Daejeon (Korea, Republic of)

2013-09-15

The design of missile require extremely small warheads that must be highly efficient and lethal. The penetration characteristics of each penetrator and the total number of penetrators on the warhead are obvious key factors that influence warhead lethality. The design of the penetrator shape and size are directly related to the space and weight of the warhead. The design of the penetrator L/D was directly related to the space and weight of the warhead. L and D are the length and the diameter of the projectile, respectively. The AUTODYN-3a code was used to study the effect of penetrator penetration. The objective of numerical analysis was to determine the penetration characteristics of penetrator produced by hypervelocity impacts under different initial conditions such as initial velocity, obliquity angle and L/D of penetrator. The residual velocity and residual mass were decreased with increasing initial impact velocity under L/D{<=}4.

The Effect and Mechanism of Transdermal Penetration Enhancement of Fu's Cupping Therapy: New Physical Penetration Technology for Transdermal Administration with Traditional Chinese Medicine (TCM) Characteristics.

Science.gov (United States)

Xie, Wei-Jie; Zhang, Yong-Ping; Xu, Jian; Sun, Xiao-Bo; Yang, Fang-Fang

2017-03-27

the control group, the indomethacin skin percutaneous rate of the FCT low-intensity group (FCTL) was 35.52%, and the enhancement ratio (ER) at 9 h was 1.76X, roughly equivalent to the penetration enhancing effect of the CPEs and iontophoresis. Secondly, the indomethacin percutaneous ratio of the FCT middle-intensity group (FCTM) and FCT high-intensity group (FCTH) were 47.36% and 54.58%, respectively, while the ERs at 9 h were 3.58X and 8.39X, respectively. Thirdly, pharmacokinetic data showed that in vivo indomethacin percutaneous absorption of the FCT was much higher than that of the control, that of the FCTM was slightly higher than that of the CPE, and that of the FCTM group was significantly higher than all others. Meanwhile, variance analysis indicated that the combination of the FCT penetration enhancement method and the CPE method had beneficial effects in enhancing skin penetration: the significance level of the CPE method was 0.0004, which was lower than 0.001, meaning the difference was markedly significant; the significance level of the FCT was also below 0.0001 and its difference markedly significant. The significance level of factor interaction A × B was lower than 0.0001, indicating that the difference in synergism was markedly significant. Moreover, SEM and TEM images showed that the SC surfaces of Sprague-Dawley rats treated with FCT were damaged, and it was difficult to observe the complete surface structure, with SC pores growing larger and its special "brick structure" becoming looser. This indicated that the barrier function of the skin was broken, thus revealing a potentially major route of skin penetration. FCT, as a new form of transdermal penetration technology, has significant penetration effects with TCM characteristics and is of high clinical value. It is worth promoting its development.

NRC Information No. 88-04, Supplement 1: Inadequate qualification and documentation of fire barrier penetration seals

International Nuclear Information System (INIS)

Rossi, C.E.

1992-01-01

Since August 9, 1979, Diablo Canyon has experienced four fires in which the penetration seal material ignited and burned. On March 25, 1986, Toledo Edison reported that the silicone foam sealant in a fire barrier penetration in the main steam line room of Davis-Besse appeared to have baked and pulled away from the pipe. This penetration was filled with low-density silicone foam, which is rated for a maximum temperature of 425 F. The main steam lines normally operate near 600 F. The licensee's corrective actions were to stuff ceramic fiber (Kaowool) into the seal for increased fire resistance and to expand the existing fire watch. The silicone foam seal material in the diesel generator exhaust pipe penetrations at Diablo Canyon was used as replacement material for the combustible foam plastic-type seals, which were involved in the 1975 fire at the Browns Ferry nuclear power plant. In addition to diesel generator exhaust pipe penetrations, some main steamline penetrations may be sealed with this material. The material is apparently designed to withstand maximum ambient temperatures of 400 F. and temporary exposure to 500 F., but not long-term exposure to higher temperatures. Although the measurement at Diablo Canyon in 1982 indicated a pipe temperature of about 600 F., average pipe temperatures are probably much higher. The licensee for Diablo Canyon determined that only six penetrations (all associated with diesel generator exhaust pipes) potentially exposed the silicone foam penetration seal material to high temperatures. For these penetration openings, the licensee plans to install a penetration seal material designed to withstand long-term exposure to high temperatures

The market penetration of energy-efficiency programs

Energy Technology Data Exchange (ETDEWEB)

Berry, L.

1990-04-01

The focus of this report is on one source of resource planning uncertainty: the expected market penetration of DSM (Demand Site Management) programs. Its purpose is to help refine planning assumptions and reduce uncertainty about the market penetration of utility DSM programs by: (1) investigating concepts and definitions of market penetration, (2) reviewing data that characterize patterns of variation (including ranges, averages and maximum levels) in program participation rates, (3) identifying the factors that affect participation, and (4) reviewing the structure and data requirements of models that forecast market penetration. 84 refs., 14 figs., 16 tabs.

Penetration analysis of projectile with inclined concrete target

Directory of Open Access Journals (Sweden)

Kim S.B.

2015-01-01

Full Text Available This paper presents numerical analysis result of projectile penetration with concrete target. We applied dynamic material properties of 4340 steels, aluminium and explosive for projectile body. Dynamic material properties were measured with static tensile testing machine and Hopkinson pressure bar tests. Moreover, we used three concrete damage models included in LS-DYNA 3D, such as SOIL_CONCRETE, CSCM (cap model with smooth interaction and CONCRETE_DAMAGE (K&C concrete models. Strain rate effect for concrete material is important to predict the fracture deformation and shape of concrete, and penetration depth for projectiles. CONCRETE_DAMAGE model with strain rate effect also applied to penetration analysis. Analysis result with CSCM model shows good agreement with penetration experimental data. The projectile trace and fracture shapes of concrete target were compared with experimental data.

Penetration analysis of projectile with inclined concrete target

Science.gov (United States)

Kim, S. B.; Kim, H. W.; Yoo, Y. H.

2015-09-01

This paper presents numerical analysis result of projectile penetration with concrete target. We applied dynamic material properties of 4340 steels, aluminium and explosive for projectile body. Dynamic material properties were measured with static tensile testing machine and Hopkinson pressure bar tests. Moreover, we used three concrete damage models included in LS-DYNA 3D, such as SOIL_CONCRETE, CSCM (cap model with smooth interaction) and CONCRETE_DAMAGE (K&C concrete) models. Strain rate effect for concrete material is important to predict the fracture deformation and shape of concrete, and penetration depth for projectiles. CONCRETE_DAMAGE model with strain rate effect also applied to penetration analysis. Analysis result with CSCM model shows good agreement with penetration experimental data. The projectile trace and fracture shapes of concrete target were compared with experimental data.

Adding Endoscopist-Directed Flexible Endoscopic Evaluation of Swallowing to the Videofluoroscopic Swallowing Study Increased the Detection Rates of Penetration, Aspiration, and Pharyngeal Residue.

Science.gov (United States)

Park, Won Young; Lee, Tae Hee; Ham, Nam Seok; Park, Ji Woong; Lee, Yang Gyun; Cho, Sang Jin; Lee, Joon Seong; Hong, Su Jin; Jeon, Seong Ran; Kim, Hyun Gun; Cho, Joo Young; Kim, Jin Oh; Cho, Jun Hyung; Lee, Ji Sung

2015-09-23

Currently, the videofluoroscopic swallowing study (VFSS) is the standard tool for evaluating dysphagia. We evaluated whether the addition of endoscopist-directed flexible endoscopic evaluation of swallowing (FEES) to VFSS could improve the detection rates of penetration, aspiration, and pharyngeal residue, compared the diagnostic efficacy between VFSS and endoscopist-directed FEES and assessed the adverse events of the FEES. In single tertiary referral center, a retrospective analysis of prospectively collected data was conducted. Fifty consecutive patients suspected of oropharyngeal dysphagia were enrolled in this study between January 2012 and July 2012. The agreement in the detection of penetration and aspiration between VFSS and FEES of viscous food (κ=0.34; 95% confidence interval [CI], 0.15 to 0.53) and liquid food (κ=0.22; 95% CI, 0.02 to 0.42) was "fair." The agreement in the detection of pharyngeal residue between the two tests was "substantial" with viscous food (κ=0.63; 95% CI, 0.41 to 0.94) and "fair" with liquid food (κ=0.37; 95% CI, 0.10 to 0.63). Adding FEES to VFSS significantly increased the detection rates of penetration, aspiration, and pharyngeal residue. No severe adverse events were noted during FEES, except for two cases of epistaxis, which stopped spontaneously without requiring any packing. This study demonstrated that the addition of endoscopist-directed FEES to VFSS increased the detection rates of penetration, aspiration, and pharyngeal residue.

Effects of soap-water wash on human epidermal penetration.

Science.gov (United States)

Zhu, Hanjiang; Jung, Eui-Chang; Phuong, Christina; Hui, Xiaoying; Maibach, Howard

2016-08-01

Skin decontamination is a primary interventional method used to decrease dermal absorption of hazardous contaminants, including chemical warfare agents, pesticides and industrial pollutants. Soap and water wash, the most common and readily available decontamination system, may enhance percutaneous absorption through the "wash-in effect." To understand better the effect of soap-water wash on percutaneous penetration, and provide insight to improving skin decontamination methods, in vitro human epidermal penetration rates of four C(14) -labeled model chemicals (hydroquinone, clonidine, benzoic acid and paraoxon) were assayed using flow-through diffusion cells. Stratum corneum (SC) absorption rates of these chemicals at various hydration levels (0-295% of the dry SC weights) were determined and compared with the results of the epidermal penetration study to clarify the effect of SC hydration on skin permeability. Results showed accelerated penetration curves of benzoic acid and paraoxon after surface wash at 30 min postdosing. Thirty minutes after washing (60 min postdosing), penetration rates of hydroquinone and benzoic acid decreased due to reduced amounts of chemical on the skin surface and in the SC. At the end of the experiment (90 min postdosing), a soap-water wash resulted in lower hydroquinone penetration, greater paraoxon penetration and similar levels of benzoic acid and clonidine penetration compared to penetration levels in the non-wash groups. The observed wash-in effect agrees with the enhancement effect of SC hydration on the SC chemical absorption rate. These results suggest SC hydration derived from surface wash to be one cause of the wash-in effect. Further, the occurrence of a wash-in effect is dependent on chemical identity and elapsed time between exposure and onset of decontamination. By reducing chemical residue quantity on skin surface and in the SC reservoir, the soap-water wash may decrease the total quantity of chemical absorbed in the

[Special penetration needling for refractory peripheral facial paralysis].

Science.gov (United States)

Cao, Rongjuan; Qiu, Xiaohu; Xie, Xiaokun

2018-03-12

To observe the clinical effect difference between special penetration needling and conventional penetration needling for the refractory peripheral facial paralysis. A total of 97 patients with intractable facial paralysis were randomized into an observation group (49 cases and 2 dropping) and a control group (48 cases and 4 dropping). In the observation group, special penetration needling at an angle about 45° between the penetration needle and paralysis muscle bundle was used, Yangbai (GB 14) through Touwei (ST 8), Yangbai (GB 14) through Shangxing (GV 23), Sizhukong (TE 23) through Yuyao (EX-HN 4), Qianzhen (Extra) through Yingxiang (LI 20), mutual penetration between Yingxiang (LI 20) and Jiache (ST 6). Conventional penetration needling was applied in the control group, Yangbai (GB 14) through Yuyao (EX-HN 4), Cuanzhu (BL 2) through Yuyao (EX-HN 4), mutual penetration between Dicang (ST 4) and Jiache (ST 6), Qianzheng (Extra) through Dicang (ST 4), Sibai (ST 2) through Yingxiang (LI 20). Three groups of electroacupuncture (discontinuous wave, 1 Hz) with tolerance were connected respectively in the two groups, Yangbai (GB 14) and Sizhukong (TE 23), Yangbai (GB 14) and Qianzheng (Extra), Yingxiang (LI 20) and Jiache (ST 6) in the observation group, Yangbai (GB 14) and Cuanzhu (BL 2), Dicang (ST 4) and Jiache (ST 6), Qianzheng (Extra) and Sibai (ST 2) in the control group. TDP was applied in the two groups at the affected Yifeng (TE 17), Jiache (ST 6) and Qianzheng (Extra), which were around the ear. Perpendicular insertion was used at Yifeng (TE 17) at the affected side and Hegu (LI 4) at the healthy side and bilateral Zusanli (ST 36). The needles were retained for 30 min. The treatment was given for 3 courses, once a day and 10 days as a course, 5 days at the interval. House-Brackmann (H-B) facial nerve grading score was recorded before and after treatment. The clinical effects were compared. The H-B scores after treatment in the two groups were higher than

Do HMO penetration and hospital competition impact quality of hospital care?

Science.gov (United States)

Rivers, P A; Fottler, M D

2004-11-01

This study examines the impact of HMO penetration and competition on hospital markets. A modified structure-conduct-performance paradigm was applied to the health care industry in order to investigate the impact of HMO penetration and competition on risk-adjusted hospital mortality rates (i.e. quality of hospital care). Secondary data for 1957 acute care hospitals in the USA from the 1991 American Hospital Association's Annual Survey of Hospitals were used. The outcome variables were risk-adjusted mortality rates in 1991. Predictor variables were market characteristics (i.e. managed care penetration and hospital competition). Control variables were environmental, patient, and institutional characteristics. Associations between predictor and outcome variables were investigated using statistical regression techniques. Hospital competition had a negative relationship with risk-adjusted mortality rates (a negative indicator of quality of care). HMO penetration, hospital competition, and an interaction effect of HMO penetration and competition were not found to have significant effects on risk-adjusted mortality rates. These findings suggest that when faced with intense competition, hospitals may respond in ways associated with reducing their mortality rates.

Varieties of cognitive penetration in visual perception.

Science.gov (United States)

Vetter, Petra; Newen, Albert

2014-07-01

Is our perceptual experience a veridical representation of the world or is it a product of our beliefs and past experiences? Cognitive penetration describes the influence of higher level cognitive factors on perceptual experience and has been a debated topic in philosophy of mind and cognitive science. Here, we focus on visual perception, particularly early vision, and how it is affected by contextual expectations and memorized cognitive contents. We argue for cognitive penetration based on recent empirical evidence demonstrating contextual and top-down influences on early visual processes. On the basis of a perceptual model, we propose different types of cognitive penetration depending on the processing level on which the penetration happens and depending on where the penetrating influence comes from. Our proposal has two consequences: (1) the traditional controversy on whether cognitive penetration occurs or not is ill posed, and (2) a clear-cut perception-cognition boundary cannot be maintained. Copyright © 2014 Elsevier Inc. All rights reserved.

Highly penetrative liposome nanomedicine generated by a biomimetic strategy for enhanced cancer chemotherapy.

Science.gov (United States)

Jia, Yali; Sheng, Zonghai; Hu, Dehong; Yan, Fei; Zhu, Mingting; Gao, Guanhui; Wang, Pan; Liu, Xin; Wang, Xiaobing; Zheng, Hairong

2018-04-25

Liposome nanomedicine has been successfully applied for cancer chemotherapy in patients. However, in general, the therapeutic efficacy is confined by its limited accumulation and penetration in solid tumors. Here, we established a biomimetic strategy for the preparation of highly penetrative liposome nanomedicine for enhanced chemotherapeutic efficacy. By applying this unique type of nanomedicine, membrane proteins on the cancer cells are used as highly penetrative targeting ligands. Biomimetic liposomes are highly stable, exhibiting a superior in vitro homologous targeting ability, and a 2.25-fold deeper penetration in 3D tumor spheroids when compared to conventional liposome nanomedicine. The fluorescence/photoacoustic dual-modal imaging approach demonstrated enhanced tumor accumulation and improved tumor penetration of the biomimetic liposome in C6 glioma tumor-bearing nude mice. Following the intravenous administration of biomimetic liposome nanomedicine, the tumor inhibition rate reached up to 93.3%, which was significantly higher when compared to that of conventional liposome nanomedicine (69.3%). Moreover, histopathological analyses demonstrated that biomimetic liposome nanomedicine has limited side effects. Therefore, these results suggested that a cancer cell membrane-based biomimetic strategy may provide a breakthrough approach for enhancing drug penetration and improving treatment efficacy, holding a great promise for further clinical studies.

Miniature Ground Penetrating Radar, CRUX GPR

Science.gov (United States)

Kim, Soon Sam; Carnes, Steven R.; Haldemann, Albert F.; Ulmer, Christopher T.; Ng, Eddie; Arcone, Steven A.

2006-01-01

Under NASA instrument development programs (PIDDP 2000-2002, MIPD 2003-2005, ESR and T, 2005) we have been developing miniature ground penetrating radars (GPR) for use in mapping subsurface stratigraphy from planetary rovers for Mars and lunar applications. The Mars GPR is for deeper penetration (up to 50 m depth) into the Martian subsurface at moderate resolution (0.5 m) for a geological characterization. As a part of the CRUX (Construction and Resource Utilization Explorer) instrument suite, the CRUX GPR is optimized for a lunar prospecting application. It will have shallower penetration (5 m depth) with higher resolution (10 cm) for construction operations including ISRU (in-situ resource utilization).

Prophylactic antibiotics for penetrating abdominal trauma.

Science.gov (United States)

Brand, Martin; Grieve, Andrew

2013-11-18

Penetrating abdominal trauma occurs when the peritoneal cavity is breached. Routine laparotomy for penetrating abdominal injuries began in the 1800s, with antibiotics first being used in World War II to combat septic complications associated with these injuries. This practice was marked with a reduction in sepsis-related mortality and morbidity. Whether prophylactic antibiotics are required in the prevention of infective complications following penetrating abdominal trauma is controversial, however, as no randomised placebo controlled trials have been published to date. There has also been debate about the timing of antibiotic prophylaxis. In 1972 Fullen noted a 7% to 11% post-surgical infection rate with pre-operative antibiotics, a 33% to 57% infection rate with intra-operative antibiotic administration and 30% to 70% infection rate with only post-operative antibiotic administration. Current guidelines state there is sufficient class I evidence to support the use of a single pre-operative broad spectrum antibiotic dose, with aerobic and anaerobic cover, and continuation (up to 24 hours) only in the event of a hollow viscus perforation found at exploratory laparotomy. To assess the benefits and harms of prophylactic antibiotics administered for penetrating abdominal injuries for the reduction of the incidence of septic complications, such as septicaemia, intra-abdominal abscesses and wound infections. Searches were not restricted by date, language or publication status. We searched the following electronic databases: the Cochrane Injuries Group Specialised Register, CENTRAL (The Cochrane Library 2013, issue 12 of 12), MEDLINE (OvidSP), Embase (OvidSP), ISI Web of Science: Science Citation Index Expanded (SCI-EXPANDED), ISI Web of Science: Conference Proceedings Citation Index- Science (CPCI-S) and PubMed. Searches were last conducted in January 2013. All randomised controlled trials of antibiotic prophylaxis in patients with penetrating abdominal trauma versus no

Influence of jet thrust on penetrator penetration when studying the structure of space object blanket

Directory of Open Access Journals (Sweden)

N. A. Fedorova

2014-01-01

Full Text Available The article presents the calculation-and-theory-based research results to examine the possibility for using the jet thrust impulse to increase a penetration depth of high-velocity penetrator modules. Such devices can be used for studies of Earth surface layer composition, and in the nearest future for other Solar system bodies too. Research equipment (sensors and different instruments is housed inside a metal body of the penetrator with a sharpened nose that decreases drag force in soil. It was assumed, that this penetrator is additionally equipped with the pulse jet engine, which is fired at a certain stage of penetrator motion into target.The penetrator is considered as a rigid body of variable mass, which is subjected to drag force and reactive force applied at the moment the engine fires. A drag force was represented with a binomial empirical law, and penetrator nose part was considered to be conical. The jet thrust force was supposed to be constant during its application time. It was in accordance with assumption that mass flow and flow rate of solid propellant combustion products were constant. The amount of propellant in the penetrator was characterized by Tsiolkovsky number Z, which specifies the ratio between the fuel mass and the penetrator structure mass with no fuel.The system of equations to describe the penetrator dynamics was given in dimensionless form using the values aligned with penetration of an equivalent inert penetrator as the time and penetration depth scales. Penetration dynamics of penetrator represented in this form allowed to eliminate the influence of penetrator initial mass and its cross-section diameter on the solution results. The lack of such dependency is convenient for comparing the calculation results since they hold for penetrators of various initial masses and cross-sections.To calculate the penetration a lunar regolith was taken as a soil material. Calculations were carried out for initial velocities of

Long-rod penetration: the transition zone between rigid and hydrodynamic penetration modes

Directory of Open Access Journals (Sweden)

Jian-feng Lou

2014-06-01

Full Text Available Long-rod penetration in a wide range of velocity means that the initial impact velocity varies in a range from tens of meters per second to several kilometers per second. The long rods maintain rigid state when the impact velocity is low, the nose of rod deforms and even is blunted when the velocity gets higher, and the nose erodes and fails to lead to the consumption of long projectile when the velocity is very high due to instantaneous high pressure. That is, from low velocity to high velocity, the projectile undergoes rigid rods, deforming non-erosive rods, and erosive rods. Because of the complicated changes of the projectile, no well-established theoretical model and numerical simulation have been used to study the transition zone. Based on the analysis of penetration behavior in the transition zone, a phenomenological model to describe target resistance and a formula to calculate penetration depth in transition zone are proposed, and a method to obtain the boundary velocity of transition zone is determined. A combined theoretical analysis model for three response regions is built by analyzing the characteristics in these regions. The penetration depth predicted by this combined model is in good agreement with experimental result.

Furnace testing of electrical and pipe-penetration seals based on foamed silicone elastomer: 60, 90, and 120-minute fire ratings

International Nuclear Information System (INIS)

Brown, A.

1979-03-01

Fire tests of foamed silicone seals for electrical and pipe penetrations have been performed using a furnace with temperature control as heat source. The tests were performed in principle in accordance with the requirements of NORDTEST 5A (ISO 834). The purpose of the tests was to obtain appropriate fire ratings for different seal thicknesses. The report covers. - Description of material used to prepare the seals and method of application - Description of furnace test assembly and method of performing test - Listing of penetrating elements and of the thermocouple array used to measure temperature - Curves of thermocouple readouts and photographs of seals during and after completion of the test. (author)

Assessing high wind energy penetration

International Nuclear Information System (INIS)

Tande, J.O.

1995-01-01

In order to convincingly promote installing wind power capacity as a substantial part of the energy supply system, a set of careful analyses must be undertaken. This paper applies a case study concentrated on assessing the cost/benefit of high wind energy penetration. The case study considers expanding the grid connected wind power capacity in Praia, the capital of Cape Verde. The currently installed 1 MW of wind power is estimated to supply close to 10% of the electric energy consumption in 1996. Increasing the wind energy penetration to a higher level is considered viable as the project settings are close to ideal, including a very capable national utility company, Electra, a conventional power supply system based on imported heavy fuel and gas oil, and favourable wind conditions with an estimated annual average of 9.3 m/s at the hub height of the wind turbines. With the applied case study assumptions, simulations with WINSYS over the lifetime of the assessed wind power investment show that investments up to 4.2 MW are economically viable. The economic optimum is found at 2.4 MW reaching an internal rate of return of almost 8% p.a. This 2.4 MW of wind power would, together with the existing wind power, supply over 30% of the electric consumption in 1996. Applying the recommended practices for estimating the cost of wind energy, the life-cycle cost of this 2.4 MW investment is estimated at a 7% discount rate and a 20 year lifetime to 0.26 DKK/kW h. (Author)

Penetrating Brain Injury after Suicide Attempt with Speargun

Directory of Open Access Journals (Sweden)

John Ross Williams

2014-07-01

Full Text Available Penetrating cranial injury by mechanisms other than are exceedingly rare, and so strategies and guidelines for the management of PBI are largely informed by data from higher-velocity penetrating injuries. Here we present a case of penetrating brain injury by the low velocity mechanism of a harpoon from an underwater fishing speargun in an attempted suicide by a 56-year-old Caucasian male. The case raised a number of interesting points in management of lower-velocity penetrating brain injury (LVPBI, including benefit in delaying foreign body removal to allow for tamponade; the importance of history taking in establishing the social/legal significance of the events surrounding the injury; the use of cerebral angiogram in all cases of PBI; advantages of using DECT to reduce artifact when available; and antibiotic prophylaxis in the context of idiosyncratic histories of usage of penetrating objects before coming in contact with the intracranial environment. We present here the management of the case in full along with an extended discussion and review of existing literature regarding key points in management of LVPBI vs. higher velocity forms of intracranial injury.

The influence of early radiolucent lines appearing on femoral head penetration into HXLPE cemented sockets.

Science.gov (United States)

Morita, Daigo; Seki, Taisuke; Higuchi, Yoshitoshi; Takegami, Yasuhiko; Amano, Takafumi; Ishiguro, Naoki

2018-04-01

This study investigates differences in femoral head penetration between highly cross-linked polyethylene (HXLPE) cemented sockets both with and without radiolucent lines (RLLs) in the early postoperative phase and at 5 years follow-up. There were 35 patients (37 hips), mean age of 66.8 years, who underwent total hip arthroplasty (THA) using highly HXLPE cemented sockets. They were divided into 2 groups based on postoperative the early appearance of RLLs. Femoral head penetrations on both anteroposterior- and Lauenstein-view radiographs were evaluated, and the mean polyethylene (PE) wear rate was calculated based on femoral head penetrations between 2 and 5 years. Femoral head penetrations in the proximal direction were 0.075 mm and 0.150 mm in the RLL and non-RLL groups at 1 year postoperatively ( p = 0.019). At 5 years measured penetration was 0.107 mm and 0.125 mm in the RLL and non-RLL groups, respectively ( p = 0.320). The mean PE wear rates in anteroposterior-view were 0.008 mm/year and 0.003 mm/year in the RLL and non-RLL groups ( p = 0.390) and those in Lauenstein-view were 0.010 mm/year and 0.005 mm/year, respectively ( p = 0.239). In the RLL group, the PE bedding-in was less compared with those in the non-RLL group. Additionally, the mean PE wear rate in the RLL group tended to be higher than that in the non-RLL group. The distribution of stress loading through the cement may differ according to whether early RLLs appear.

Effect of egg washing and correlation between cuticle and egg penetration by various Salmonella strains.

Science.gov (United States)

Gole, Vaibhav C; Roberts, Juliet R; Sexton, Margaret; May, Damian; Kiermeier, Andreas; Chousalkar, Kapil K

2014-07-16

In Australia, Europe and the United States, eggs and egg products are frequently associated with Salmonella food poisoning outbreaks. Many of the egg-associated Salmonella outbreaks have been due to the products such as mayonnaise, ice-cream and cold desserts which are eaten without cooking following the addition of raw egg. The ability of four Salmonella isolates (one each of S. Singapore, S. Adelaide, S. Worthington and S. Livingstone) to penetrate washed and unwashed eggs using whole egg and agar egg penetration methods was investigated in the current study. The results of the agar penetration experiment indicated that all the isolates used in the present study have the capacity to penetrate the eggshell. Eggshell penetration by the S. Worthington isolate was higher but not significant (p=0.06) in washed eggs compared to unwashed eggs. However, for all other isolates (S. Singapore, S. Adelaide and S. Livingstone), there was no significant difference in penetration of washed and unwashed eggs. Statistical analysis indicated that cuticle score was a significant linear predictor of Salmonella eggshell penetration. Whole egg penetration results showed that all of the Salmonella isolates used in the present study were capable of surviving on the eggshell surface after 21days of incubation (at 20°C) following a high dose of inoculation (10(5)CFU/mL). The combined data of all isolates demonstrated that, the survival rate of Salmonella on eggshells (inoculated with 10(5)CFU/mL) was significantly higher (p=0.002) at 20°C as compared to 37°C. S. Singapore, S. Worthington, and S. Livingstone were not detected in egg internal contents whereas S. Adelaide was detected in one egg's internal contents. Crown Copyright © 2014. Published by Elsevier B.V. All rights reserved.

Sphere impact and penetration into wet sand

KAUST Repository

Marston, J. O.

2012-08-07

We present experimental results for the penetration of a solid sphere when released onto wet sand. We show, by measuring the final penetration depth, that the cohesion induced by the water can result in either a deeper or shallower penetration for a given release height compared to dry granular material. Thus the presence of water can either lubricate or stiffen the granular material. By assuming the shear rate is proportional to the impact velocity and using the depth-averaged stopping force in calculating the shear stress, we derive effective viscosities for the wet granular materials.

Sphere impact and penetration into wet sand

KAUST Repository

Marston, J. O.; Vakarelski, Ivan Uriev; Thoroddsen, Sigurdur T

2012-01-01

We present experimental results for the penetration of a solid sphere when released onto wet sand. We show, by measuring the final penetration depth, that the cohesion induced by the water can result in either a deeper or shallower penetration for a given release height compared to dry granular material. Thus the presence of water can either lubricate or stiffen the granular material. By assuming the shear rate is proportional to the impact velocity and using the depth-averaged stopping force in calculating the shear stress, we derive effective viscosities for the wet granular materials.

Evaporation Limited Radial Capillary Penetration in Porous Media.

Science.gov (United States)

Liu, Mingchao; Wu, Jian; Gan, Yixiang; Hanaor, Dorian A H; Chen, C Q

2016-09-27

The capillary penetration of fluids in thin porous layers is of fundamental interest in nature and various industrial applications. When capillary flows occur in porous media, the extent of penetration is known to increase with the square root of time following the Lucas-Washburn law. In practice, volatile liquid evaporates at the surface of porous media, which restricts penetration to a limited region. In this work, on the basis of Darcy's law and mass conservation, a general theoretical model is developed for the evaporation-limited radial capillary penetration in porous media. The presented model predicts that evaporation decreases the rate of fluid penetration and limits it to a critical radius. Furthermore, we construct a unified phase diagram that describes the limited penetration in an annular porous medium, in which the boundaries of outward and inward liquid are predicted quantitatively. It is expected that the proposed theoretical model will advance the understanding of penetration dynamics in porous media and facilitate the design of engineered porous architectures.

Theoretical analysis and design of hydro-hammer with a jet actuator: An engineering application to improve the penetration rate of directional well drilling in hard rock formations.

Science.gov (United States)

He, Jiang-Fu; Liang, Yun-Pei; Li, Li-Jia; Luo, Yong-Jiang

2018-01-01

Rapid horizontal directional well drilling in hard or fractured formations requires efficient drilling technology. The penetration rate of conventional hard rock drilling technology in horizontal directional well excavations is relatively low, resulting in multiple overgrinding of drill cuttings in bottom boreholes. Conventional drilling techniques with reamer or diamond drill bit face difficulties due to the long construction periods, low penetration rates, and high engineering costs in the directional well drilling of hard rock. To improve the impact energy and penetration rate of directional well drilling in hard formations, a new drilling system with a percussive and rotary drilling technology has been proposed, and a hydro-hammer with a jet actuator has also been theoretically designed on the basis of the impulse hydro-turbine pressure model. In addition, the performance parameters of the hydro-hammer with a jet actuator have been numerically and experimentally analyzed, and the influence of impact stroke and pumped flow rate on the motion velocity and impact energy of the hydro-hammer has been obtained. Moreover, the designed hydro-hammer with a jet actuator has been applied to hard rock drilling in a trenchless drilling program. The motion velocity of the hydro-hammer ranges from 1.2 m/s to 3.19 m/s with diverse flow rates and impact strokes, and the motion frequency ranges from 10 Hz to 22 Hz. Moreover, the maximum impact energy of the hydro-hammer is 407 J, and the pumped flow rate is 2.3 m3/min. Thus, the average penetration rate of the optimized hydro-hammer improves by over 30% compared to conventional directional drilling in hard rock formations.

Investigation of environmental natural penetrating radiation level in Beijing

International Nuclear Information System (INIS)

Wu Zengxin; Zhang Wenying; Zheng Rukuan; Wei Shujun; Ding Huiqiu

1992-01-01

The authors report the methods and results of investigation of environmental natural penetrating radiation level in Beijing. There were 83 measurement points selected, which were located at the vertexes of 1 x 1 km square meshes and uniformly distributed over the urban district. 173 net grid measuring points selected with grid spacing of 10 x 10 km and uniformly distributed over the suburban district. Another 131 more densely distributed points were added over some special areas. The results show that: (1) The point-weighted, area-weighted and population-weighted average value of natural γ radiation dose rate over field is 56.2, 56.4 and 50.1 nGy · h -1 respectively. The γ radiation dose rate is higher in west and north area than in southeast area. (2) The point-weighted average value of natural γ radiation dose rate over roads was 49.3 nGy · h -1 . (3) The point weighted and population-weighted average value of natural γ radiation dose inside buildings was 83.5 and 77.1 nGy · h -1 respectively. (4) The weighted average of air absorbed dose rate from the ionizing components of cosmic rays (except for neutron) over point number and population was respectively 29.0 and 27.5 nGy · h -1 indoors, and 32.3 and 30.8 nGy · h -1 outdoors. (5) The point and population-weighted means of natural penetrating radiation dose rate (the contribution from neutron is not included) are 112.8 and 104.5 nGy · h -1 indoors, respectively; 88.7 and 81.3 nGy · h -1 outdoors, respectively. (6) The annual effective dose equivalent per capital people natural γ radiation, cosmic ray and natural penetrating radiation was 0.43, 0.25 and 0.68 mSv respectively, and the annual collective effective dose equivalent was 4.0, 2.3 and 6.3 x 10 3 man · Sv, respectively

Low Force Penetration of Icy Regolith

Science.gov (United States)

Mantovani, J. G.; Galloway, G. M.; Zacny, K.

2016-01-01

A percussive cone penetrometer measures the strength of granular material by using percussion to deliver mechanical energy into the material. A percussive cone penetrometer was used in this study to penetrate a regolith ice mixture by breaking up ice and decompacting the regolith. As compared to a static cone penetrometer, percussion allows low reaction forces to push a penetrometer probe tip more easily into dry regolith in a low gravity environment from a planetary surface rover or a landed spacecraft. A percussive cone penetrates icy regolith at ice concentrations that a static cone cannot penetrate. In this study, the percussive penetrator was able to penetrate material under 65 N of down-force which could not be penetrated using a static cone under full body weight. This paper discusses using a percussive cone penetrometer to discern changes in the concentration of water-ice in a mixture of lunar regolith simulant and ice to a depth of one meter. The rate of penetration was found to be a function of the ice content and was not significantly affected by the down-force. The test results demonstrate that this method may be ideal for a small platform in a reduced gravity environment. However, there are some cases where the system may not be able to penetrate the icy regolith, and there is some risk of the probe tip becoming stuck so that it cannot be retracted. It is also shown that a percussive cone penetrometer could be used to prospect for water ice in regolith at concentrations as high as 8 by weight.

Penetration level and impact of ITS applications: economic analysis of ITS deployment plans and the role of governments

NARCIS (Netherlands)

Bie, Jing; Vreeswijk, Jacob Dirk; van Berkum, Eric C.

2012-01-01

The impact of Intelligent Transportation System (ITS) applications, especially cooperative driver assistance systems, depends greatly on the percentage of users equipped (i.e. the penetration rate). The application may have little impact if only a few drivers are using the application. A higher

Influence of Formulation on the Cuticular Penetration and on Spray Deposit Properties of Manganese and Zinc Foliar Fertilizers

Directory of Open Access Journals (Sweden)

Alvin Alexander

2016-06-01

Full Text Available Foliar fertilization, or the application of nutrient solutions to the foliage of plants, has become a very important tool as a supplement to traditional soil fertilization. So far, knowledge about the real mechanisms of foliar nutrient uptake is still limited. In this study different manganese (Mn and zinc (Zn carriers differing in their solubility and chemical characteristics (chelated or non-chelated, with or without the presence of a surfactant-penetrant were compared with regard to their penetration characteristics through enzymatically-isolated cuticles. The experiments were explicitly conducted under high humidity conditions in order not to penalize compounds with a higher deliquescent point. The results show that Mn penetrates more rapidly through the cuticle than Zn ions for unknown reasons. The addition of a surfactant-penetrant enhances the penetration rate in the case of Mn ions. This trend is much less pronounced for zinc ions. Formulations based on insoluble carriers, such as carbonate or oxide, only poorly penetrate through the cuticle. In order to rapidly control micronutrient deficiency problems, only fully water soluble micronutrient carriers should be used.

Indoor particle dynamics in a school office: determination of particle concentrations, deposition rates and penetration factors under naturally ventilated conditions.

Science.gov (United States)

Cong, X C; Zhao, J J; Jing, Z; Wang, Q G; Ni, P F

2018-05-09

Recently, the problem of indoor particulate matter pollution has received much attention. An increasing number of epidemiological studies show that the concentration of atmospheric particulate matter has a significant effect on human health, even at very low concentrations. Most of these investigations have relied upon outdoor particle concentrations as surrogates of human exposures. However, considering that the concentration distribution of the indoor particulate matter is largely dependent on the extent to which these particles penetrate the building and on the degree of suspension in the indoor air, human exposures to particles of outdoor origin may not be equal to outdoor particle concentration levels. Therefore, it is critical to understand the relationship between the particle concentrations found outdoors and those found in indoor micro-environments. In this study, experiments were conducted using a naturally ventilated office located in Qingdao, China. The indoor and outdoor particle concentrations were measured at the same time using an optical counter with four size ranges. The particle size distribution ranged from 0.3 to 2.5 μm, and the experimental period was from April to September, 2016. Based on the experimental data, the dynamic and mass balance model based on time was used to estimate the penetration rate and deposition rate at air exchange rates of 0.03-0.25 h -1 . The values of the penetration rate and deposition velocity of indoor particles were determined to range from 0.45 to 0.82 h -1 and 1.71 to 2.82 m/h, respectively. In addition, the particulate pollution exposure in the indoor environment was analyzed to estimate the exposure hazard from indoor particulate matter pollution, which is important for human exposure to particles and associated health effects. The conclusions from this study can serve to provide a better understanding the dynamics and behaviors of airborne particle entering into buildings. And they will also highlight

Interpretation of Cone Penetration Testing in Silty Soils Conducted under Partially Drained Conditions

DEFF Research Database (Denmark)

Holmsgaard, Rikke; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo

2016-01-01

The standard penetration rate used in cone penetration tests (CPTs) is 20 mm=s, regardless of soil type, which yields fully drained penetration in sand and fully undrained penetration in clay. However, for silty soils that represent an intermediate grain size composition and unique characteristic...

Fire barrier penetration seals in nuclear power plants

International Nuclear Information System (INIS)

Bajwa, C.S.; West, K.S.

1996-07-01

NNPs are divided into separated fire areas by fire-rated structural barriers. Fire-rated penetration seals are installed to seal certain openings in these barriers, in order to provide reasonable assurance that a fire will be confined to the area where it started. The staff of the Fire Protection Engineering Section, Office of Nuclear Reactor Regulation, US NRC, conducted a comprehensive technical assessment of penetration seals to address reports of potential problems, to determine if there were any problems of safety significance, and to determine if NRC requirements, review guidance, and inspection procedures are adequate. It was concluded that the general condition of penetration seal programs in industry is satisfactory, and that the actions taken in 1988 and 1994 had increased industry awareness of potential problems and resulted in more thorough surveillances, maintenance, and corrective actions. These previous staff actions, together with continued licensee upkeep of existing penetration seal programs and continued NRC inspections, are adequate to maintain public health and safety. Several minor revisions to the NRC fire protection regulation and review guidance are recommended

Microscopic Driving Parameters-Based Energy-Saving Effect Analysis under Different Electric Vehicle Penetration

Directory of Open Access Journals (Sweden)

Enjian Yao

2013-01-01

Full Text Available Due to the rapid motorization over the recent years, China's transportation sector has been facing an increasing environmental pressure. Compared with gasoline vehicle (GV, electric vehicle (EV is expected to play an important role in the mitigation of CO2 and other pollution emissions, and urban air quality improvement, for its zero emission during use and higher energy efficiency. This paper aims to estimate the energy saving efficiency of EV, especially under different EV penetration and road traffic conditions. First, based on the emission and electricity consumption data collected by a light-duty EV and a light duty GV, a set of electricity consumption rate models and gasoline consumption rate models are established. Then, according to the conversion formula of coal equivalent, these models are transformed into coal equivalent consumption models, which make gasoline consumption and electricity consumption comparable. Finally, the relationship between the EV penetration and the reduction of energy consumption is explored based on the simulation undertaken on the North Second Ring Road in Beijing. The results show that the coal equivalent consumption will decrease by about 5% with the increases of EV penetration by 10% and the maximum energy-saving effect can be achieved when the traffic volume is about 4000 pcu/h.

Are high penetrations of commercial cogeneration good for society?

Science.gov (United States)

Keen, Jeremy F.; Apt, Jay

2016-12-01

Low natural gas prices, market reports and evidence from New York State suggest that the number of commercial combined heat and power (CHP) installations in the United States will increase by 2%-9% annually over the next decade. We investigate how increasing commercial CHP penetrations may affect net emissions, the distribution network, and total system energy costs. We constructed an integrated planning and operations model that maximizes owner profit through sizing and operation of CHP on a realistic distribution feeder in New York. We find that a greater penetration of CHP reduces both total system energy costs and network congestion. Commercial buildings often have low and inconsistent heat loads, which can cause low fuel utilization efficiencies, low CHP rates-of-return and diminishing avoided emissions as CHP penetration increases. In the northeast, without policy intervention, a 5% penetration of small commercially owned CHP would increase CO2 emissions by 2% relative to the bulk power grid. Low emission CHP installations can be encouraged with incentives that promote CHP operation only during times of high heat loads. Time-varying rates, such as time-of-day and seasonal rates, are one option and were shown to reduce customer emissions without reducing profits. In contrast, natural gas rate discounts, a common incentive for industrial CHP in some states, can encourage CHP operation during low heat loads and thus increase emissions.

Operation CeaseFire-New Orleans: an infectious disease model for addressing community recidivism from penetrating trauma.

Science.gov (United States)

McVey, Erin; Duchesne, Juan C; Sarlati, Siavash; O'Neal, Michael; Johnson, Kelly; Avegno, Jennifer

2014-07-01

CeaseFire, using an infectious disease approach, addresses violence by partnering hospital resources with the community by providing violence interruption and community-based services for an area roughly composed of a single city zip code (70113). Community-based violence interrupters start in the trauma center from the moment penetrating trauma occurs, through hospital stay, and in the community after release. This study interprets statistics from this pilot program, begun May 2012. We hypothesize a decrease in penetrating trauma rates in the target area compared with others after program implementation. This was a 3-year prospective data collection of trauma registry from May 2010 to May 2013. All intentional, target area, penetrating trauma treated at our Level I trauma center received immediate activation of CeaseFire personnel. Incidences of violent trauma and rates of change, by zip code, were compared with the same period for 2 years before implementation. During this period, the yearly incidence of penetrating trauma in Orleans Parish increased. Four of the highest rates were found in adjacent zip codes: 70112, 70113, 70119, and 70125. Average rates per 100,000 were 722.7, 523.6, 286.4, and 248, respectively. These areas represent four of the six zip codes citywide that saw year-to-year increases in violent trauma during this period. Zip 70113 saw a lower rate of rise in trauma compared with 70112 and a higher but comparable rise compared with that of 70119 and 70125. Hospital-based intervention programs that partner with culturally appropriate personnel and resources outside the institution walls have potential to have meaningful impact over the long term. While few conclusions of the effect of such a program can be drawn in a 12-month period, we anticipate long-term changes in the numbers of penetrating injuries in the target area and in the rest of the city as this program expands. Therapeutic study, level IV.

Penetrating eye injury in war.

Science.gov (United States)

Biehl, J W; Valdez, J; Hemady, R K; Steidl, S M; Bourke, D L

1999-11-01

The percentage of penetrating eye injuries in war has increased significantly in this century compared with the total number of combat injuries. With the increasing use of fragmentation weapons and possibly laser weapons on the battle-field in the future, the rate of eye injuries may exceed the 13% of the total military injuries found in Operations Desert Storm/Shield. During the Iran-Iraq War (1980-1988), eye injuries revealed that retained foreign bodies and posterior segment injuries have an improved prognosis in future military ophthalmic surgery as a result of modern diagnostic and treatment modalities. Compared with the increasing penetrating eye injuries on the battlefield, advances in ophthalmic surgery are insignificant. Eye armor, such as visors that flip up and down and protect the eyes from laser injury, needs to be developed. Similar eye protection is being developed in civilian sportswear. Penetrating eye injury in the civilian sector is becoming much closer to the military model and is now comparable for several reasons.

Relationship between bovine fertility and the number of spermatozoa penetrating the cervical mucus within straws.

Science.gov (United States)

Taş, Muzaffer; Bacinoglu, Suleyman; Cirit, Umüt; Ozdaş, Ozen Banu; Ak, Kemal

2007-09-01

In this study, by using a recently developed test technique, the relationship between the total spermatozoa number penetrating determined sites of bovine cervical mucus in straws and potential fertility of bulls, and other spermatological characteristics were investigated. Furthermore, we aimed to determine the effect on the test results, of two different incubation temperatures (37 and 41 degrees C) and two sperm penetration distance ranges (PDRs). Frozen semen samples of six Holstein bulls were used in the study. The bulls were divided into two fertility groups (high and low fertility) according to the "non-return rates" (NRR). For the penetration test, cervical mucus was drawn into transparent plastic straws and incubated with semen at 37 and 41 degrees C for 15 min. After the incubation, straws were frozen in liquid nitrogen vapour and stored at -20 degrees C. On the evaluation day, concentrations of spermatozoa penetrated to the PDRs, each of which was 2.5 mm, between 32.5 and 35 mm (first penetration distance range, PDR1), and 50 and 52.5 mm (second penetration distance range, PDR2) distance in the straws from the open end, were measured. When compared with the low fertility group, bulls from the high fertility group showed a higher number of spermatozoa at the determined PDRs, and a significant positive correlation was found between the total number of spermatozoa at the penetration distances and the NRR scores of the bulls.

[National and regional market penetration rates of generic's high dosage buprenorphine: its evolution from 2006 to 2008, using reimbursed drug database].

Science.gov (United States)

Boczek, Christelle; Frauger, Elisabeth; Micallef, Joëlle; Allaria-Lapierre, Véronique; Reggio, Patrick; Sciortino, Vincent

2012-01-01

To assess the national market penetration rate (PR) of generic high-dosage buprenorphine (HDB) in 2008 and its evolution since their marketing (2006), and making a point for each dosage and at regional level. Retrospective study over data using national and regional health reimbursement database over three years (2006-2008). In 2008, the generic HDB's national MPR was 31%. The PR for each dosage were 45% for 0.4 mg, 36% for 2 mg and 19% for 8 mg. The (PR) based on Defined Daily Dose (DDD) was 23% in 2008, 15% in 2007 and 4% in 2006. In 2008, at the regional level, disparities were observed in the adjusted penetration rate from 15% in Île de France to 39% in Champagne Ardennes Lorraine. The national PR of generic HDB has increased. There are differences in MPR in terms of dosage and area. However, this PR is still low (in 2008, 82% of the delivered drugs are generics). © 2012 Société Française de Pharmacologie et de Thérapeutique.

HMO penetration and the geographic mobility of practicing physicians.

Science.gov (United States)

Polsky, D; Kletke, P R; Wozniak, G D; Escarce, J J

2000-09-01

In this study, we assessed the influence of changes in health maintenance organization (HMO) penetration on the probability that established patient care physicians relocated their practices or left patient care altogether. For physicians who relocated their practices, we also assessed the impact of HMO penetration on their destination choices. We found that larger increases in HMO penetration decreased the probability that medical/surgical specialists in early career stayed in patient care in the same market, but had no impact on generalists, hospital-based specialists, or mid career medical/surgical specialists. We also found that physicians who relocated their practices were much more likely to choose destination markets with the same level of HMO penetration or lower HMO penetration compared with their origin markets than they were to choose destination markets with higher HMO penetration. The largely negligible impact of changes in HMO penetration on established physicians' decisions to relocate their practices or leave patient care is consistent with high relocation and switching costs. Relocating physicians' attraction to destination markets with the same level of HMO penetration as their origin markets suggests that, while physicians' styles of medical practice may adapt to changes in market conditions, learning new practice styles is costly.

Exploring past energy changes and their implications for the pace of penetration of new energy technologies

International Nuclear Information System (INIS)

Lund, P.D.

2010-01-01

Possible growth paths for new electricity generation technologies are investigated on the basis of an empirical analysis of past penetration rates. Finding and understanding high market penetration scenarios is relevant to formulating climate change mitigation strategies. The analysis shows that under favorable growth conditions, photovoltaics and wind could produce 15% and 25%, respectively, of world electricity by 2050. Under the same assumptions nuclear power could increase to 41% of world electricity. But it is unlikely that all three technology paths could be realized up to these values simultaneously and therefore the penetration rates presented here should be considered as indicative only. The results show that under positive conditions, an embryonic technology could move as a preferred option into a mainstream energy source within half a century. The introduction of growth constraints reflecting, e.g., severe economic, technical, or political limitations could reduce the above numbers by a factor of up to 2-3. The results indicate a decline in the relative year-to-year growth of new technologies when they have higher market shares. A comparison of the results with other short-term and long-term technology scenarios shows satisfactory agreement.

Modelling the existing Irish energy-system to identify future energy costs and the maximum wind penetration feasible

DEFF Research Database (Denmark)

Connolly, D.; Lund, Henrik; Mathiesen, Brian Vad

2010-01-01

energy- system to future energy costs by considering future fuel prices, CO2 prices, and different interest rates. The final investigation identifies the maximum wind penetration feasible on the 2007 Irish energy- system from a technical and economic perspective, as wind is the most promising fluctuating...... for the existing Irish energy-system is approximately 30% from both a technical and economic perspective based on 2020 energy prices. Future studies will use the model developed in this study to show that higher wind penetrations can be achieved if the existing energy-system is modified correctly. Finally...... renewable resource available in Ireland. It is concluded that the reference model simulates the Irish energy-system accurately, the annual fuel costs for Ireland’s energy could increase by approximately 58% from 2007 to 2020 if a business-as-usual scenario is followed, and the optimum wind penetration...

THE INFLUENCE OF BUILDING FEATURES ON AIR EXCHANGE RATE AND PARTICLE PENETRATION

Science.gov (United States)

The paper discusses some measured values of particle penetration into an unoccupied research house under a variety of conditions. (NOTE: Exposure to fine particles of outdoor origin continues to receive increased attention. Since people spend up to 90% of their time indoors, the ...

Double ionization chamber survey meter for the separate measurement of penetrating and non-penetrating dose

International Nuclear Information System (INIS)

Lucas, A.C.

1987-01-01

The full capabilities of an advanced 8-bit microprocessor have been utilized in construction of a wide range, multiplexing survey meter based on dual electrometers and ionization chambers. The ionization chambers are constructed of modular conducting and non-conducting parts in such a way that the angular dependence for measurement of beta radiation is controlled by design. Display functions for the high range instrument include logarithmic or linear analog display, digital display of rate or dose, SI or English units, optionally for either total, penetrating, or non-penetrating dose. The instrument is presently configured to operate in the range 0.1 R/hr to 50,000 R/hr in support of the requirements of Regulatory Guide 19.7

Effect of chevron nozzle penetration on aero-acoustic characteristics of jet at M = 0.8

Science.gov (United States)

Nikam, S. R.; Sharma, S. D.

2017-12-01

Aero-acoustic characteristics of a high-speed jet with chevron nozzles are experimentally investigated at a Mach number of 0.8. The main focus is to examine the effects of the extent of chevron penetration and its position in the mixing layer. Chevron nozzles with three different levels of penetration employed at three different longitudinal locations from the nozzle lip are tested, and the results are compared with those of a plain baseline nozzle. The chevrons are found to produce a lobed shear layer through the notched region, thereby increasing the surface area of the jet, particularly in the close vicinity of the nozzle, which increases the mixing and reduces the potential core length. This effect becomes more prominent with increasing penetration closer to the nozzle lip in the thinner mixing layer. Near field and far field noise measurements show distinctly different acoustic features due to chevrons. The chevrons are found to effectively shift the dominant noise source upstream closer to the nozzle. Present investigation proposes a simpler method for locating the dominant noise source from the peak of the centerline velocity decay rate. The overall noise levels registered along the jet edge immediately downstream of the chevrons are higher, but further downstream they are reduced in comparison with the plain baseline nozzle. Also, the chevrons beam the noise towards higher polar angles at higher frequencies. At shallow polar angles with respect to the jet axis in the far field, chevrons suppress the noise at low frequencies with increasing penetration, but for higher polar angles, while they continue to suppress the low frequency noise, at higher frequencies the trend is found to reverse. The noise measured in the near field close to the jet edge is composed of two components: acoustic and hydrodynamic. Of these two components, the chevrons are found to reduce the hydrodynamic component in comparison with the acoustic one.

Penetration of amalgam constituents into dentine

NARCIS (Netherlands)

Scholtanus, Johannes D.; Ozcan, Mutlu; Huysmans, Marie-Charlotte D. N. J. M.

Objectives: Amalgam restorations are replaced by adhesively placed composite resin restorations at an increasing rate. After the removal of amalgam dentine often shows marked dark discoloration that is attributed to the penetration of corrosion products from overlying amalgams. it is questioned

Penetration of amalgam constituents into dentine.

NARCIS (Netherlands)

Scholtanus, J.D.; Ozcan, M.; Huysmans, M.C.D.N.J.M.

2009-01-01

OBJECTIVES: Amalgam restorations are replaced by adhesively placed composite resin restorations at an increasing rate. After the removal of amalgam dentine often shows marked dark discoloration that is attributed to the penetration of corrosion products from overlying amalgams. It is questioned

HMO penetration: has it hurt public hospitals?

Science.gov (United States)

Clement, J P; Grazier, K L

2001-01-01

The purpose of this study is to determine the extent to which health maintenance organization (HMO) penetration within the public hospitals' market area affects the financial performance and viability of these institutions, relative to private hospitals. Hospital- and market-specific measures are examined in a fully interacted model of over 2,300 hospitals in 321 metropolitan statistical areas (MSAs) in 1995. Although hospitals located in markets with higher HMO penetration have lower financial performance as reflected in revenues, expenses and operating margin, public hospitals are not more disadvantaged than other hospitals by managed care.

Assessment of high penetration of solar photovoltaics in Wisconsin

International Nuclear Information System (INIS)

Myers, Kevin S.; Klein, Sanford A.; Reindl, Douglas T.

2010-01-01

This paper provides an assessment of the large-scale implementation of distributed solar photovoltaics in Wisconsin with regard to its interaction with the utility grid, economics of varying levels of high penetration, and displaced emissions. These assessment factors are quantified using simulations with measured hourly solar radiation and weather data from the National Solar Radiation Database as primary inputs. Hourly utility load data for each electric utility in Wisconsin for a complete year were used in combination with the simulated PV output to quantify the impacts of high penetration of distributed PV on the aggregate Wisconsin electric utility load. As the penetration rate of distributed PV systems increases, both economic and environmental benefits experience diminishing returns. At penetration rates exceeding 15-20% of the aggregate utility load peak, less of the PV-energy is utilized and the contribution of the aggregate electricity generated from PV approaches a practical limit. The limit is not affected by costs, but rather by the time-distribution of available solar radiation and mismatch with the coincidence of aggregate utility electrical loads. The unsubsidized levelized cost of electricity from PV is more than four times greater than the current market price for electricity, based on time-of-use rates, in Wisconsin. At the present time, the investment in solar PV as a cost-effective means to reduce emissions from traditional electricity generation sources is not justified. (author)

Hard rock tunnel boring machine penetration test as an indicator of chipping process efficiency

Directory of Open Access Journals (Sweden)

M.C. Villeneuve

2017-08-01

Full Text Available The transition from grinding to chipping can be observed in tunnel boring machine (TBM penetration test data by plotting the penetration rate (distance/revolution against the net cutter thrust (force per cutter over the full range of penetration rates in the test. Correlating penetration test data to the geological and geomechanical characteristics of rock masses through which a penetration test is conducted provides the ability to reveal the efficiency of the chipping process in response to changing geological conditions. Penetration test data can also be used to identify stress-induced tunnel face instability. This research shows that the strength of the rock is an important parameter for controlling how much net cutter thrust is required to transition from grinding to chipping. It also shows that the geological characteristics of a rock will determine how efficient chipping occurs once it has begun. In particular, geological characteristics that lead to efficient fracture propagation, such as fabric and mica contents, will lead to efficient chipping. These findings will enable a better correlation between TBM performance and geological conditions for use in TBM design, as a basis for contractual payments where penetration rate dominates the excavation cycle and in further academic investigations into the TBM excavation process.

A statistical experimental design approach to evaluate the influence of various penetration enhancers on transdermal drug delivery of buprenorphine

Directory of Open Access Journals (Sweden)

S.Mojtaba Taghizadeh

2015-03-01

Full Text Available A series of drug-in-adhesive transdermal drug delivery systems (patch with different chemical penetration enhancers were designed to deliver drug through the skin as a site of application. The objective of our effort was to study the influence of various chemical penetration enhancers on skin permeation rate and adhesion properties of a transdermal drug delivery system using Box–Behnken experimental design. The response surface methodology based on a three-level, three-variable Box–Behnken design was used to evaluate the interactive effects on dependent variables including, the rate of skin permeation and adhesion properties, namely peel strength and tack value. Levulinic acid, lauryl alcohol, and Tween 80 were used as penetration enhancers (patch formulations, containing 0–8% of each chemical penetration enhancer. Buprenorphine was used as a model penetrant drug. The results showed that incorporation of 20% chemical penetration enhancer into the mixture led to maximum skin permeation flux of buprenorphine from abdominal rat skin while the adhesion properties decreased. Also that skin flux in presence of levulinic acid (1.594 μg/cm2 h was higher than Tween 80 (1.473 μg/cm2 h and lauryl alcohol (0.843 μg/cm2 h, and in mixing these enhancers together, an additional effect was observed. Moreover, it was found that each enhancer increased the tack value, while levulinic acid and lauryl alcohol improved the peel strength but Tween 80 reduced it. These findings indicated that the best chemical skin penetration enhancer for buprenorphine patch was levulinic acid. Among the designed formulations, the one which contained 12% (wt/wt enhancers exhibited the highest efficiency.

A statistical experimental design approach to evaluate the influence of various penetration enhancers on transdermal drug delivery of buprenorphine.

Science.gov (United States)

Taghizadeh, S Mojtaba; Moghimi-Ardakani, Ali; Mohamadnia, Fatemeh

2015-03-01

A series of drug-in-adhesive transdermal drug delivery systems (patch) with different chemical penetration enhancers were designed to deliver drug through the skin as a site of application. The objective of our effort was to study the influence of various chemical penetration enhancers on skin permeation rate and adhesion properties of a transdermal drug delivery system using Box-Behnken experimental design. The response surface methodology based on a three-level, three-variable Box-Behnken design was used to evaluate the interactive effects on dependent variables including, the rate of skin permeation and adhesion properties, namely peel strength and tack value. Levulinic acid, lauryl alcohol, and Tween 80 were used as penetration enhancers (patch formulations, containing 0-8% of each chemical penetration enhancer). Buprenorphine was used as a model penetrant drug. The results showed that incorporation of 20% chemical penetration enhancer into the mixture led to maximum skin permeation flux of buprenorphine from abdominal rat skin while the adhesion properties decreased. Also that skin flux in presence of levulinic acid (1.594 μg/cm(2) h) was higher than Tween 80 (1.473 μg/cm(2) h) and lauryl alcohol (0.843 μg/cm(2) h), and in mixing these enhancers together, an additional effect was observed. Moreover, it was found that each enhancer increased the tack value, while levulinic acid and lauryl alcohol improved the peel strength but Tween 80 reduced it. These findings indicated that the best chemical skin penetration enhancer for buprenorphine patch was levulinic acid. Among the designed formulations, the one which contained 12% (wt/wt) enhancers exhibited the highest efficiency.

UO2/magnetite concrete interaction and penetration study

International Nuclear Information System (INIS)

Farhadieh, R.; Purviance, R.; Carlson, N.

1983-01-01

The concrete structure represents a line of defense in safety assessment of containment integrity and possible minimization of radiological releases following a reactor accident. The penetration study of hot UO 2 particles into limestone concrete and basalt concrete highlighted some major differences between the two concretes. These included penetration rate, melting and dissolution phenomena, released gases, pressurization of the UO 2 chamber, and characteristics of post-test concrete. The present study focuses on the phenomena associated with core debris interaction with and penetration into magnetite type concrete. The real material experiment was carried out with UO 2 particles and magnetite concrete in a test apparatus similar to the one utilized in the UO 2 /limestone experiment

Application of Uintah-MPM to shaped charge jet penetration of aluminum

International Nuclear Information System (INIS)

Burghardt, J; Leavy, B; Brannon, R; Guilkey, J; Xue, Z

2010-01-01

The capability of the generalized interpolation material point (GIMP) method in simulation of penetration events is investigated. A series of experiments was performed wherein a shaped charge jet penetrates into a stack of aluminum plates. Electronic switches were used to measure the penetration time history. Flash x-ray techniques were used to measure the density, length, radius and velocity of the shaped charge jet. Simulations of the penetration event were performed using the Uintah MPM/GIMP code with several different models of the shaped charge jet being used. The predicted penetration time history for each jet model is compared with the experimentally observed penetration history. It was found that the characteristics of the predicted penetration were dependent on the way that the jet data are translated to a discrete description. The discrete jet descriptions were modified such that the predicted penetration histories fell very close to the range of the experimental data. In comparing the various discrete jet descriptions it was found that the cumulative kinetic energy flux curve represents an important way of characterizing the penetration characteristics of the jet. The GIMP method was found to be well suited for simulation of high rate penetration events.

Penetrator strength effect in long-rod critical ricochet angle

International Nuclear Information System (INIS)

Daneshjou, K.; Shahravi, M.

2008-01-01

3D numerical simulations were performed in order to further investigate the role of penetrator strength in the interaction of long-rods and oblique targets. Three distinctive regimes resulting from oblique impact depending on the obliquity, namely simple ricochet, critical ricochet and target perforation, were investigated in detail. Critical ricochet angles were calculated with a full 3D explicit finite element method for various impact velocities and strength of target plates and projectiles. Numerical predictions were compared with existing two-dimensional analytical models and test results. It was predicted that critical ricochet angle increases with decreasing impact velocity and that higher ricochet angles were expected if higher strength target materials are employed. But there are differences between analytical models and 3D numerical simulation results or test results. The causes for these discrepancies are established by numerical simulations which explore the validity of the penetrator strength parameter in the analytical model as a physical entity. As a matter of fact, in this paper we first investigate the role of penetrator dynamic strength using two-dimensional simulation which resulted in different penetrator strengths out of different impact velocities. Next, by applying these amounts for penetrator strength in Rosenberg analytical model the critical ricochet angle is calculated. Finally, a comparison between the present analytical method with the 3D simulation and test results shows that the new analytical approach leads to modified results with respect to Rosenberg ones

Evaporation and skin penetration characteristics of mosquito repellent formulations

International Nuclear Information System (INIS)

Reifenrath, W.G.; Hawkins, G.S.; Kurtz, M.S.

1989-01-01

Formulations of the mosquito repellent N,N-diethyl-3-methylbenzamide (deet) in combination with a variety of additives were developed to control repellent evaporation and percutaneous penetration. Deet was also formulated with the repellent dimethyl phthalate to study the interaction of the two compounds on the skin. The evaporation and penetration processes were evaluated on whole and split-thickness pig skin using radiolabeled repellents with an in vitro apparatus. Under essentially still air and air flow conditions, one of the deet formulations resulted in significantly reduced total evaporation and percutaneous penetration of deet as compared to unformulated repellent. When deet and dimethyl phthalate were combined, neither repellent affected the total amount of evaporation and penetration of the other compound. However, initial percutaneous penetration and evaporation rates were slightly less and decayed less rapidly than when both chemicals were tested separately at the same dose. These results indicated a degree of competition of the two compounds for the same avenues of loss

Bending spring rate investigation of nanopipette for cell injection

Science.gov (United States)

Shen, Yajing; Zhang, Zhenhai; Fukuda, Toshio

2015-04-01

Bending of nanopipette tips during cell penetration is a major cause of cell injection failure. However, the flexural rigidity of nanopipettes is little known due to their irregular structure. In this paper, we report a quantitative method to estimate the flexural rigidity of a nanopipette by investigating its bending spring rate. First nanopipettes with a tip size of 300 nm are fabricated from various glass tubes by laser pulling followed by focused ion beam (FIB) milling. Then the bending spring rate of the nanopipettes is investigated inside a scanning electron microscope (SEM). Finally, a yeast cell penetration test is performed on these nanopipettes, which have different bending spring rates. The results show that nanopipettes with a higher bending spring rate have better cell penetration capability, which confirms that the bending spring rate may well reflect the flexural rigidity of a nanopipette. This method provides a quantitative parameter for characterizing the mechanical property of a nanopipette that can be potentially taken as a standard specification in the future. This general method can also be used to estimate other one-dimensional structures for cell injection, which will greatly benefit basic cell biology research and clinical applications.

Bending spring rate investigation of nanopipette for cell injection

International Nuclear Information System (INIS)

Shen, Yajing; Zhang, Zhenhai; Fukuda, Toshio

2015-01-01

Bending of nanopipette tips during cell penetration is a major cause of cell injection failure. However, the flexural rigidity of nanopipettes is little known due to their irregular structure. In this paper, we report a quantitative method to estimate the flexural rigidity of a nanopipette by investigating its bending spring rate. First nanopipettes with a tip size of 300 nm are fabricated from various glass tubes by laser pulling followed by focused ion beam (FIB) milling. Then the bending spring rate of the nanopipettes is investigated inside a scanning electron microscope (SEM). Finally, a yeast cell penetration test is performed on these nanopipettes, which have different bending spring rates. The results show that nanopipettes with a higher bending spring rate have better cell penetration capability, which confirms that the bending spring rate may well reflect the flexural rigidity of a nanopipette. This method provides a quantitative parameter for characterizing the mechanical property of a nanopipette that can be potentially taken as a standard specification in the future. This general method can also be used to estimate other one-dimensional structures for cell injection, which will greatly benefit basic cell biology research and clinical applications. (paper)

Social motivation in prospective memory: higher importance ratings and reported performance rates for social tasks.

Science.gov (United States)

Penningroth, Suzanna L; Scott, Walter D; Freuen, Margaret

2011-03-01

Few studies have addressed social motivation in prospective memory (PM). In a pilot study and two main studies, we examined whether social PM tasks possess a motivational advantage over nonsocial PM tasks. In the pilot study and Study 1, participants listed their real-life important and less important PM tasks. Independent raters categorized the PM tasks as social or nonsocial. Results from both studies showed a higher proportion of tasks rated as social when important tasks were requested than when less important tasks were requested. In Study 1, participants also reported whether they had remembered to perform each PM task. Reported performance rates were higher for tasks rated as social than for those rated as nonsocial. Finally, in Study 2, participants rated the importance of two hypothetical PM tasks, one social and one nonsocial. The social PM task was rated higher in importance. Overall, these findings suggest that social PM tasks are viewed as more important than nonsocial PM tasks and they are more likely to be performed. We propose that consideration of the social relevance of PM will lead to a more complete and ecologically valid theoretical description of PM performance. (PsycINFO Database Record (c) 2011 APA, all rights reserved).

A study on the particle penetration in RMS Right Single Quotation Marks particle transport system

International Nuclear Information System (INIS)

Son, S. M.; Oh, S. H.; Choi, C. R.

2014-01-01

In nuclear facilities, a radiation monitoring system (RMS) monitors the exhaust gas containing the radioactive material. Samples of exhaust gas are collected in the downstream region of air cleaning units (ACUs) in order to examine radioactive materials. It is possible to predict an amount of radioactive material by analyzing the corrected samples. Representation of the collected samples should be assured in order to accurately sense and measure of radioactive materials. The radius of curvature is mainly 5 times of tube diameter. Sometimes, a booster fan is additionally added to enhance particle penetration rate... In this study, particle penetrations are calculated to evaluate particle penetration rate with various design parameters (tube lengths, tube declined angles, radius of curvatures, etc). The particle penetration rates have been calculated for several elements in the particle transport system. In general, the horizontal length of tube and the number of bending tube have a big impact on the penetration rate in the particle transport system. If the sampling location is far from the radiation monitoring system, additional installation of booster fans could be considered in case of large diameter tubes, but is not recommended in case of small diameter tube. In order to enhance particle penetration rate, the following works are recommended by priority. 1) to reduce the interval between sampling location and radiation monitoring system 2) to reduce the number of the bending tube

Effect of chevron nozzle penetration on aero-acoustic characteristics of jet at M = 0.8

Energy Technology Data Exchange (ETDEWEB)

Nikam, S R [K. J. Somaiya college of Engineering, Mumbai (India); Sharma, S D, E-mail: srnikam12@gmail.com [I.I.T. Bombay, Mumbai (India)

2017-12-15

Aero-acoustic characteristics of a high-speed jet with chevron nozzles are experimentally investigated at a Mach number of 0.8. The main focus is to examine the effects of the extent of chevron penetration and its position in the mixing layer. Chevron nozzles with three different levels of penetration employed at three different longitudinal locations from the nozzle lip are tested, and the results are compared with those of a plain baseline nozzle. The chevrons are found to produce a lobed shear layer through the notched region, thereby increasing the surface area of the jet, particularly in the close vicinity of the nozzle, which increases the mixing and reduces the potential core length. This effect becomes more prominent with increasing penetration closer to the nozzle lip in the thinner mixing layer. Near field and far field noise measurements show distinctly different acoustic features due to chevrons. The chevrons are found to effectively shift the dominant noise source upstream closer to the nozzle. Present investigation proposes a simpler method for locating the dominant noise source from the peak of the centerline velocity decay rate. The overall noise levels registered along the jet edge immediately downstream of the chevrons are higher, but further downstream they are reduced in comparison with the plain baseline nozzle. Also, the chevrons beam the noise towards higher polar angles at higher frequencies. At shallow polar angles with respect to the jet axis in the far field, chevrons suppress the noise at low frequencies with increasing penetration, but for higher polar angles, while they continue to suppress the low frequency noise, at higher frequencies the trend is found to reverse. The noise measured in the near field close to the jet edge is composed of two components: acoustic and hydrodynamic. Of these two components, the chevrons are found to reduce the hydrodynamic component in comparison with the acoustic one. (paper)

STYLET PENETRATION BEHAVIOURS OF FOUR Cicadulina ...

African Journals Online (AJOL)

ACSS

Feeding from phloem cells, overall probing and probe mean (the average time per probe) were higher ... Key Words: Cicadulina spp., electrical penetration graph, MSV, Zea mays .... wire and alligator clip clamped to the stem of the .... á All measures are in minutes except for frequency of probing; - Main effect not significant.

Rich or poor: Who should pay higher tax rates?

Science.gov (United States)

Murilo Castro de Oliveira, Paulo

2017-08-01

A dynamic agent model is introduced with an annual random wealth multiplicative process followed by taxes paid according to a linear wealth-dependent tax rate. If poor agents pay higher tax rates than rich agents, eventually all wealth becomes concentrated in the hands of a single agent. By contrast, if poor agents are subject to lower tax rates, the economic collective process continues forever.

Penetrating ureteral trauma

Directory of Open Access Journals (Sweden)

Gustavo P. Fraga

2007-04-01

Full Text Available OBJECTIVE: The purpose of this series is to report our experience in managing ureteral trauma, focusing on the importance of early diagnosis, correct treatment, and the impact of associated injuries on the management and morbid-mortality. MATERIALS AND METHODS: From January 1994 to December 2002, 1487 laparotomies for abdominal trauma were performed and 20 patients with ureteral lesions were identified, all of them secondary to penetrating injury. Medical charts were analyzed as well as information about trauma mechanisms, diagnostic routine, treatment and outcome. RESULTS: All patients were men. Mean age was 27 years. The mechanisms of injury were gunshot wounds in 18 cases (90% and stab wounds in two (10%. All penetrating abdominal injuries had primary indication of laparotomy, and neither excretory urography nor computed tomography were used in any case before surgery. The diagnosis of ureteric injury was made intra-operatively in 17 cases (85%. Two ureteral injuries (10% were initially missed. All patients had associated injuries. The treatment was dictated by the location, extension and time necessary to identify the injury. The overall incidence of complications was 55%. The presence of shock on admission, delayed diagnosis, Abdominal Trauma Index > 25, Injury Severity Score > 25 and colon injuries were associated to a high complication rate, however, there was no statistically significant difference. There were no mortalities in this group. CONCLUSIONS: A high index of suspicion is required for diagnosis of ureteral injuries. A thorough exploration of all retroperitoneal hematoma after penetrating trauma should be an accurate method of diagnosis; even though it failed in 10% of our cases.

Percutaneous penetration of 3H-Huangbai extracts and H3-berberine

International Nuclear Information System (INIS)

Jin Xipeng; Yu Xiaozhong; Zhang Nianbao; Kuang Jianwen

1992-01-01

The percutaneous penetration of 3 H-huangbai extracts and 3 H-berberine through excised guinea pig and human shins was studied using the static diffusion cell technique. The data were treated with mathematical model of skin absorption. The results showed that huangbai extracts and berberine could penetrate the guinea pig and human skins at (above) dose of 8.38 μg/cm 2 and 14.32 μg/cm 2 , respectively. The amount and rate of penetration increased linearly with the time of exposure and dose. The permeability of berberine through guinea pig and human skins in two vehicles (water and glycol) was lower than that of huangbai extracts. When Huangbai extracts and berberine were applied in glycol solution, the vehicle greatly enhanced the penetration of the two penetrant. The lag time of two penetrant through human skin was longer than that through guinea pig skin

Methane penetration in DIII-D ELMing H-mode plasmas

International Nuclear Information System (INIS)

West, W.P.; Lasnier, C.J.; Whyte, D.G.; Isler, R.C.; Evans, T.E.; Jackson, G.L.; Rudakov, D.; Wade, M.R.; Strachan, J.

2003-01-01

Carbon penetration into the core plasma during midplane and divertor methane puffing has been measured for DIII-D ELMing H-mode plasmas. The methane puffs are adjusted to a measurable signal, but global plasma parameters are only weakly affected (line average density, e > increases by E , drops by 6+ density profiles in the core measured as a function of time using charge exchange recombination spectroscopy. The methane penetration factor is defined as the difference in the core content with the puff on and puff off, divided by the carbon confinement time and the methane puffing rate. In ELMing H-mode discharges with ion ∇B drift direction into the X-point, increasing the line averaged density from 5 to 8x10 19 m -3 dropped the penetration factor from 6.6% to 4.6% for main chamber puffing. The penetration factor for divertor puffing was below the detection limit (<1%). Changing the ion ∇B drift to away from the X-point decreased the penetration factor by more than a factor of five for main chamber puffing

LAPAROSCOPIC MANAGEMENT OF RETROPERITONEAL INJURIES IN PENETRATING ABDOMINAL INJURIES.

Science.gov (United States)

Mosai, F

2017-09-01

Laparoscopy in penetrating abdominal injuries is now accepted and practiced in many modern trauma centres. However its role in evaluating and managing retroperitoneal injuries is not yet well established. The aim of this study was to document our experience in using laparoscopy in a setting of penetrating abdominal injuries with suspected retroperitoneal injury in haemodynamically stable patients. A retrospective descriptive study of prospectively collected data from a trauma unit at Dr George Mukhari Academic Hospital (DGMAH) was done. All haemodynamically stable patients with penetrating abdominal injury who were offered laparoscopy from January 2012 to December 2015 were reviewed and those who met the inclusion criteria were analysed. A total of 284 patients with penetrating abdominal injuries were reviewed and 56 met the inclusion criteria and were analysed. The median age was 30.8 years (15-60 years) and males constituted 87.5% of the study population. The most common mechanism of injury was penetrating stab wounds (62.5%). Forty-five patients (80.3%) were managed laparoscopically, of these n=16 (28.5%) had retroperitoneal injuries that required surgical intervention. The most commonly injured organ was the colon (19.6%). The conversion rate was 19.6% with most common indication for conversion been active bleeding (14%). The complication rate was 7.14% (N=4) and were all Clavien-Dindo grade 3. There were no recorded missed injuries and no mortality. The positive outcomes documented in this study with no missed injuries and absence of mortality suggests that laparoscopy is a feasible option in managing stable patients with suspected retroperitoneal injuries.

HMO penetration and physicians' earnings.

Science.gov (United States)

Hadley, J; Mitchell, J M

1999-11-01

The goal of this study is to estimate whether cross-sectional variations in enrollment in health maintenance organizations (HMOs) affected physicians' earnings and hourly income in 1990. Using data from a nationally representative sample of 4,577 younger physicians (penetration is endogenous and used the instrumental variables approach to obtain unbiased estimates. HMO penetration had a negative and statistically significant impact on physicians earnings in 1990. A doubling of the average level of HMO penetration in the market is estimated to reduce annual earnings by 7% to 10.7%, and hourly earnings by approximately 6% to 9%. It appears that HMOs were successful in reducing physicians' annual and per hour earnings in 1990, presumably through a combination of fewer visits and lower payment rates for people covered by HMOs. Although these results cannot be generalized to all physicians, the experience of a younger cohort of physicians may still be a good indicator of the future effects of HMOs because younger physicians may be more susceptible to market forces than older and more established physicians. Moreover, these results may be somewhat conservative because they reflect market behavior in 1990, several years before the rapid growth and more aggressive market behavior of HMOs in recent years.

The Influence of Salt Water on Chloride Penetration in Geopolymer Concrete

Directory of Open Access Journals (Sweden)

Halim Like Novia

2017-01-01

Full Text Available This paper presents the influence of chloride ion penetration in geopolymer concrete. Fly ash as based material for geopolymer concrete was used in this mixture. Fly ash was mixed with sodium hydroxide (NaOH 8 M and sodium silicate (Na2SiO3 as the alkali solution. The sizes of cylindrical specimens were prepared with a diameter of 100 mm and 200 mm high. Some specimens were immersed in salt water at a concentration of 3.5%, and other control specimens were cured in tap water for 30, 60, 90, and 120 days. The mechanical properties were determined with compressive test which was conducted at 28, 30, 60, 90 and 120 days. Some durability tests were performed for porosity, chloride penetration, and pH measurement. It was found that geopolymer concrete has higher compressive strength than concrete made with Ordinary Portland cement (OPC. However, chloride penetration in geopolymer concrete is higher than OPC. The pH measurement showed that geopolymer concrete has less pH than OPC concrete. The porosity of concrete has been found to influence chloride penetration and pH of concrete.

Interactions of calcium ions with weakly acidic active ingredients slow cuticular penetration: a case study with glyphosate.

Science.gov (United States)

Schönherr, Jörg; Schreiber, Lukas

2004-10-20

Potassium and calcium salts of glyphosate were obtained by titrating glyphosate acid with the respective bases to pH 4.0, and rates of penetration of these salts across isolated astomatous cuticular membranes (CMs) were measured at 20 degrees C and 70, 80, 90, and 100% humidity. K-glyphosate exhibited first-order penetration kinetics, and rate constants (k) increased with increasing humidity. Ca-glyphosate penetrated only when the humidity above the salt residue was 100%. At 90% humidity and below, Ca-glyphosate formed a solid residue on the CMs and penetration was not measurable. With Ca-glyphosate, the k value at 100% humidity decreased with time and the initial rates were lower than for K-glyphosate by a factor of 3.68. After equimolar concentrations of ammonium oxalate were added to Ca-glyphosate, high penetration rates close to those measured with K-glyphosate were measured at all humidities. Adding ammonium sulfate or potassium carbonate also increased rates between 70 and 100% humidity, but they were not as high as with ammonium oxalate. The data indicate that at pH 4.0 one Ca2+ ion is bound to two glyphosate anions. This salt has its deliquescence point near 100% humidity. Therefore, it is a solid at lower humidity and does not penetrate. Its molecular weight is 1.82 times larger than that of K-glyphosate, and this greatly slows down rates of penetration, even at 100% humidity. The additives tested have low solubility products and form insoluble precipitates with Ca2+ ions, but only ammonium oxalate binds Ca2+ quantitatively. The resulting ammonium salt of glyphosate penetrates at 70-100% humidity and at rates comparable to K-glyphosate. The results contribute to a better understanding of the hard water antagonism observed with glyphosate. It is argued that other pesticides and hormones with carboxyl functions are likely to respond to Ca2+ ions in a similar fashion. In all of these cases, ammonium oxalate is expected to overcome hard water antagonism

Nonoperative management of penetrating kidney injuries: a prospective audit.

Science.gov (United States)

Moolman, C; Navsaria, P H; Lazarus, J; Pontin, A; Nicol, A J

2012-07-01

The role of nonoperative management for penetrating kidney injuries is unknown. Therefore, we review the management and outcome of penetrating kidney injuries at a center with a high incidence of penetrating trauma. Data from all patients presenting with hematuria and/or kidney injury discovered on imaging or at surgery admitted to the trauma center at Groote Schuur Hospital in Cape Town, South Africa during a 19-month period (January 2007 to July 2008) were prospectively collected and reviewed. These data were analyzed for demographics, injury mechanism, perioperative management, nephrectomy rate and nonoperative success. Patients presenting with hematuria and with an acute abdomen underwent a single shot excretory urogram. Those presenting with hematuria without an indication for laparotomy underwent computerized tomography with contrast material. A total of 92 patients presented with hematuria following penetrating abdominal trauma. There were 75 (80.4%) proven renal injuries. Of the patients 84 were men and the median age was 26 years (range 14 to 51). There were 50 stab wounds and 42 gunshot renal injuries. Imaging modalities included computerized tomography in 60 cases and single shot excretory urography in 18. There were 9 patients brought directly to the operating room without further imaging. A total of 47 patients with 49 proven renal injuries were treated nonoperatively. In this group 4 patients presented with delayed hematuria, of whom 1 had a normal angiogram and 3 underwent successful angioembolization of arteriovenous fistula (2) and false aneurysm (1). All nonoperatively managed renal injuries were successfully treated without surgery. There were 18 nephrectomies performed for uncontrollable bleeding (11), hilar injuries (2) and shattered kidney (3). Post-nephrectomy complications included 1 infected renal bed hematoma requiring percutaneous drainage. Of the injuries found at laparotomy 12 were not explored, 2 were drained and 5 were treated with

Variation in penetration of submicrometric particles through electrostatic filtering facepieces during exposure to paraffin oil aerosol.

Science.gov (United States)

Plebani, Carmela; Listrani, Stefano; Tranfo, Giovanna; Tombolini, Francesca

2012-01-01

Several studies show the increase of penetration through electrostatic filters during exposure to an aerosol flow, because of particle deposition on filter fibers. We studied the effect of increasing loads of paraffin oil aerosol on the penetration of selected particle sizes through an electrostatic filtering facepiece. FFP2 facepieces were exposed for 8 hr to a flow rate of 95.0 ± 0.5 L/min of polydisperse paraffin aerosol at 20.0 ± 0.5 mg/m(3). The penetration of bis(2-ethylhexyl)sebacate (DEHS) monodisperse neutralized aerosols, with selected particle size in the 0.03-0.40 μm range, was measured immediately prior to the start of the paraffin aerosol loading and at 1, 4, and 8 hr after the start of paraffin aerosol loading. Penetration through isopropanol-treated facepieces not oil paraffin loaded was also measured to evaluate facepiece behavior when electrostatic capture mechanisms are practically absent. During exposure to paraffin aerosol, DEHS penetration gradually increased for all aerosol sizes, and the most penetrating particle size (0.05 μm at the beginning of exposure) shifted slightly to larger diameters. After the isopropanol treatment, the higher penetration value was 0.30 μm. In addition to an increased penetration during paraffin loading at a given particle size, the relative degree of increase was greater as the particle size increased. Penetration value measured after 8 hr for 0.03-μm particles was on average 1.6 times the initial value, whereas it was about 8 times for 0.40-μm particles. This behavior, as well evidenced in the measurements of isopropanol-treated facepieces, can be attributed to the increasing action in particle capture of the electrostatic forces (Coulomb and polarization), which depend strictly on the diameter and electrical charge of neutralized aerosol particles. With reference to electrostatic filtering facepieces as personal protective equipment, results suggest the importance of complying with the manufacturer

Correlation between classification and secondary screw penetration in proximal humeral fractures.

Directory of Open Access Journals (Sweden)

Qiuke Wang

Full Text Available In this study, we investigated the correlation between fracture classification and secondary screw penetration.We retrospectively identified 189 patients with displaced proximal humeral fractures treated by ORIF at our hospital between June 2006 and June 2013. All fractures were classified radiographically before surgery and follow-up for least 2 years after surgery was recommended. At each follow-up, radiographs were taken in three orthogonal views to evaluate secondary screw penetration.The study population consisted of 189 patients. Of these, 70 were male and 119 female, with a mean age of 59.1 years; the mean follow-up time was 28.5 months. Secondary screw penetration occurred in 26 patients. The risk of developing secondary screw penetration was 11.3-fold higher in four-part fractures than two-part fractures (P 0.05.Patients with four-part fractures, type C fractures and medial hinges disruption are vulnerable to secondary screw penetration. This allows additional precautions to be instituted and measures to be taken as needed.

Penetration of albendazole sulphoxide into hydatid cysts.

OpenAIRE

Morris, D L; Chinnery, J B; Georgiou, G; Stamatakis, G; Golematis, B

1987-01-01

The penetration of albendazole sulphoxide, the principal metabolite of albendazole into hydatid cysts (E granulosus) was measured by means of in vitro animal and clinical studies. The drug freely diffuses across the parasitic membranes. Cyst/serum concentrations of 22% were achieved in patients, longer pre-operative therapy produced higher concentrations.

Physical Penetration Testing: A Whole New Story in Penetration Testing

NARCIS (Netherlands)

Dimkov, T.; Pieters, Wolter

2011-01-01

Physical penetration testing plays an important role in assuring a company that the security policies are properly enforced and that the security awareness of the employees is on the appropriate level. In physical penetration tests the tester physically enters restricted locations and directly

Natural penetrating radiation inside silicate dwellings in Chengdu and recommendation on permissible limits for radioactivity of building material made of silicate cinders

International Nuclear Information System (INIS)

Li Guangzao

1984-01-01

This paper reports the results of external exposure rate of penetrating radiation inside silicate dwellings in Chengdu. The average exposure rate was 24.3+-3.5 R/h. It was evidently higher than of red brick dwellings. The average effective equivalent of the population in silicate dwellings was 123.4+-10.4 mrem/y and the average additional dose was 29.5+-12.5 mrem/y. The permissible limits recommended for silicate building material would be 6 pCi/g, 7 pCi/g and 102 pCi/g for 226 Ra, 232 Th and 40 K, respectively. The total activity must fulfill the formula of Csub(Ra)/6 + Csub(Th)/7 + Csub(k)/102 1. Under ordinary condition the exposure rate (10+background) R/h of penetrating radiation from the surface of dry building material might be taken as the permissible limit for dwellings and other public buildings

Elastic behavior of MFI-type zeolites: Compressibility of H-ZSM-5 in penetrating and non-penetrating media

International Nuclear Information System (INIS)

Quartieri, Simona; Montagna, Gabriele; Arletti, Rossella; Vezzalini, Giovanna

2011-01-01

The elastic behavior of H-ZSM-5 was investigated by in-situ synchrotron X-ray powder diffraction, using both silicone oil (s.o.) and (16:3:1) methanol:ethanol:water (m.e.w.) as 'non-penetrating' and 'penetrating' pressure transmitting media, respectively. From P amb to 6.2 GPa the volume reduction observed in s.o. is 16.6%. This testifies that H-ZSM-5 is one of the most flexible microporous materials up to now compressed in s.o. Volume reduction observed in m.e.w. up to 7.6 GPa is 14.6%. A strong increase in the total electron number of the extraframework system, due to the penetration of water/alcohol molecules in the pores, is observed in m.e.w. This effect is the largest up to now observed in zeolites undergoing this phenomenon without cell volume expansion. The higher compressibility in s.o. than in m.e.w. can be ascribed to the penetration of the extra-water/alcohol molecules, which stiffen the structure and contrast the channel deformations. - Graphical abstract: High-pressure behavior of H-ZSM-5 compressed in (16:3:1) methanol:ethanol:water: (a) projection of the structure along the [0 1 0] direction at P amb , 2 GPa and after pressure release to original ambient conditions (P amb (rev)), and (b) P-dependence of the extraframework content expressed as total number of electrons (gray square represents the number of the extraframework electrons at P amb after decompression). Highlights: → X-ray powder diffraction study of H-ZSM-5 compressibility. → H-ZSM-5 is one of the softest porous material compressed in silicon oil. → Penetration of additional water/alcohol molecules upon compression in m.e.w. → Extra molecules contribute to stiffen the structure and to contrast HP effects.

Correlation for downward melt penetration into a miscible low-density substrate

International Nuclear Information System (INIS)

Fang, L.J.; Cheung, F.B.; Pedersen, D.R.; Linehan, J.H.

1984-01-01

Downward penetration of a sacrificial bed material or a concrete basemat structure by an overlying layer of core melt resulting from a hypothetical core disruptive accident has been a major issue in post accident heat removal studies. One characteristic feature of this problem is that the solid substrate, when molten, is miscible with and lighter than the core melt so that the rate of penetration is strongly dependent upon the motion of natural convection in the melt layer driven by the density difference between the core melt and the molten substrate. This fundamentally interesting and technologically important problem has been investigated by a number of researchers. Significantly different melting rates, however, were observed in these studies. Questions concerning the occurrence of flow transition and its effect on melt penetration remain to be answered. To promote the understanding of the phenomena and to strengthen the data base of melt penetration, simulation experiments were conducted using various kinds of salt solutions (KI, NaCl, CaCl 2 , and MgCl 2 solutions) as the working fluid and an air-bubble-free ice slab as the solid substrate

Management of penetrating colon and rectal injuries in the pediatric patient.

Science.gov (United States)

Haut, Elliott R; Nance, Michael L; Keller, Martin S; Groner, Jonathan I; Ford, Henri R; Kuhn, Ann; Tuchfarber, Barbara; Garcia, Victor; Schwab, C William; Stafford, Perry W

2004-09-01

Management of civilian penetrating colon injuries in the adult has evolved from the universal use of fecal diversion to the highly selective use of colostomy. We hypothesized that a similar management approach was appropriate for the pediatric population. A retrospective review of pediatric patients (age trauma centers for the period January 1990 through June 2001. For the period of review, 53 children with a penetrating colorectal injury were identified. Firearms caused 89 percent of the injuries. The colon was injured in 83 percent (n = 44) of patients and the rectum in 17 percent (n = 9) of patients. The colorectal injury was managed without colostomy in 62 percent (n = 33) and with colostomy in 38 percent (colon = 11, rectum = 9). All rectal injuries were treated with colostomy. The hospital length of stay was longer in the colostomy group (17.6 days vs. 11.4 days). The complication rate was higher in the colostomy group (55 percent vs. 27 percent), which included two patients with stoma-related complications. There was no mortality in this series. Primary repair was used safely in most cases of civilian penetrating colon injuries in the pediatric population. All rectal injuries were treated with colostomy in this series. Fecal diversion was used selectively. Colostomy was performed for selected cases of colon wounds associated with shock, multiple blood transfusions, multiple other injuries, extensive contamination, and high-velocity weapons. In the absence of these associated factors, primary repair appears justified.

Rapid penetration into granular media visualizing the fundamental physics of rapid earth penetration

CERN Document Server

Iskander, Magued

2015-01-01

Rapid Penetration into Granular Media: Visualizing the Fundamental Physics of Rapid Earth Penetration introduces readers to the variety of methods and techniques used to visualize, observe, and model the rapid penetration of natural and man-made projectiles into earth materials. It provides seasoned practitioners with a standard reference that showcases the topic's most recent developments in research and application. The text compiles the findings of new research developments on the subject, outlines the fundamental physics of rapid penetration into granular media, and assembles a com

Air pollutant penetration through airflow leaks into buildings

Energy Technology Data Exchange (ETDEWEB)

Liu, De-Ling [Univ. of California, Berkeley, CA (United States)

2002-01-01

The penetration of ambient air pollutants into the indoor environment is of concern owing to several factors: (1) epidemiological studies have shown a strong association between ambient fine particulate pollution and elevated risk of human mortality; (2) people spend most of their time in indoor environments; and (3) most information about air pollutant concentration is only available from ambient routine monitoring networks. A good understanding of ambient air pollutant transport from source to receptor requires knowledge about pollutant penetration across building envelopes. Therefore, it is essential to gain insight into particle penetration in infiltrating air and the factors that affect it in order to assess human exposure more accurately, and to further prevent adverse human health effects from ambient particulate pollution. In this dissertation, the understanding of air pollutant infiltration across leaks in the building envelope was advanced by performing modeling predictions as well as experimental investigations. The modeling analyses quantified the extent of airborne particle and reactive gas (e.g., ozone) penetration through building cracks and wall cavities using engineering analysis that incorporates existing information on building leakage characteristics, knowledge of pollutant transport processes, as well as pollutant-surface interactions. Particle penetration is primarily governed by particle diameter and by the smallest dimension of the building cracks. Particles of 0.1-1 μm are predicted to have the highest penetration efficiency, nearly unity for crack heights of 0.25 mm or higher, assuming a pressure differential of 4 Pa or greater and a flow path length of 3 cm or less. Supermicron and ultrafine particles (less than 0.1 μm) are readily deposited on crack surfaces by means of gravitational settling and Brownian diffusion, respectively. The fraction of ozone penetration through building leaks could vary widely, depending significantly on its

Investigation of environmental natural penetrating radiation in Hunan province

International Nuclear Information System (INIS)

1991-01-01

The methods and results of the investigation of natural penetrating radiation level in Hunan Province are presented. 309 25 x 25 km-netted measuring points were set up uniformly all over the province, with 1007 densely measuring points of different type added. The results showed that: (1) the point-weighted, area-weighted and population-weighted average value of natural γ radiation dose rate over field was 7.11, 6.90 and 7.07 x 10 -8 Gy · h -1 , respectively; (2) The point-weighted and population-weighted average value of natural γ radiation dose rate over road was 7.05 x 10 -8 Gy · h -1 ; (3) The point-weighted and population-weighted average value of natural γ radiation dose rate inside buildings was 10.43 and 10.56 x 10 -8 Gy · h -1 ; (4) The point-weighted and population-weighted average value of the dose rate inside buildings from cosmic ray was 2.67 and 2.66 x 10 -8 Gy · h -1 , respectively; (5) The point-weighted and population-weighted average value of natural penetrating radiation dose rate inside buildings was 13.1 and 13.2 x 10 -8 Gy · h -1 , and outside buildings was 10.1 and 9.88 x 10 -8 Gy · h -1 , respectively; (6) The annual effective dose equivalent from natural γ radiation, cosmic ray and natural penetrating radiation was 0.58, 0.24 and 0.82 mSv, respectively, and correspondingly, the annual collective effective dose equivalent was 3.1, 1.3 and 4.4 x 10 4 man · Sv, respectively

A Comparison of Different Corneal Iontophoresis Protocols for Promoting Transepithelial Riboflavin Penetration.

Science.gov (United States)

Gore, Daniel M; O'Brart, David P; French, Paul; Dunsby, Chris; Allan, Bruce D

2015-12-01

To measure corneal riboflavin penetration using different transepithelial iontophoresis protocols. Freshly enucleated rabbit eyes were divided into nine treatment groups of 4 eyes. One group, in which 0.1% wt/vol riboflavin was applied for 30 minutes without iontophoresis after corneal epithelial debridement, acted as a control. The remaining groups were treated with an intact epithelium using different riboflavin formulations and varying iontophoresis current, soak, and rinse times. After riboflavin application, eyes were snap frozen in liquid nitrogen. Corneal cross sections 35 μm thick were then imaged immediately by two-photon fluorescence microscopy, using image processing software to quantify stromal riboflavin concentration at different corneal depths. In the epithelium-on iontophoresis treatment groups, greater stromal riboflavin penetration was achieved with higher-concentration riboflavin solutions, greater iontophoresis dosage, and longer solution contact times. A protocol utilizing 0.25% wt/vol riboflavin with benzalkonium chloride (BAC) 0.01% and two cycles of applied current and subsequent soaking (1 mA 5 minutes, soak 5 minutes; 0.5 mA 5 minutes, soak 5 minutes) achieved similar stromal riboflavin penetration to epithelium-off controls. The best-performing non-BAC-containing protocol produced stromal riboflavin penetration approximately 60% that of epithelium-off controls. Riboflavin solutions containing saline resulted in minimal stromal penetration. Riboflavin loading within the epithelium was equivalent to or higher than that in the subjacent stroma, despite rinsing the ocular surface with balanced salt solution. Modified iontophoresis protocols can significantly improve transepithelial riboflavin penetration in experimental corneal collagen cross-linking.

On the penetration of etchant into tracks in polycarbonate

International Nuclear Information System (INIS)

Fink, D.; Dwivedi, K.K.; Mueller, M.; Ghosh, S.; Hnatowicz, V.; Vacik, J.; Cervena, J.

2000-01-01

The time dependence of the uptake of NaOH/LiOH etchant in pristine polycarbonate (PC) and in PC irradiated with 3 GeV Pb ions has been examined. Different stages of etchant penetration can be distinguished. The overall surface-near etchant uptake along tracks is always higher than the the one of the nonirradiated pristine material. Furthermore, the directional dependence of the etchant penetration during the incubation time is studied. Though the shapes of the etchant distributions along the tracks are practically the same in all directions, they differ in their absolute magnitudes. This can be explained by the different cross-sectional track areas exposed at the surface, which enable different etchant penetration efficiencies. Therefore, tracks which run more or less parallel to the surface normal show less etchant uptake than those being strongly tilted

Non-operative management of right side thoracoabdominal penetrating injuries--the value of testing chest tube effluent for bile.

Science.gov (United States)

De Rezende Neto, João Baptista; Guimarães, Tiago Nunes; Madureira, João Lopo; Drumond, Domingos André Fernandes; Leal, Juliana Campos; Rocha, Aroldo; Oliveira, Rodrigo Guimarães; Rizoli, Sandro B

2009-05-01

While mandatory surgery for all thoracoabdominal penetrating injuries is advocated by some, the high rate of unnecessary operations challenges this approach. However, the consequences of intrathoracic bile remains poorly investigated. We sought to evaluate the outcome of patients who underwent non-operative management of right side thoracoabdominal (RST) penetrating trauma, and the levels of bilirubin obtained from those patients' chest tube effluent. We managed non-operatively all stable patients with a single RST penetrating injury. Chest tube effluent samples were obtained six times within (4-8 h; 12-16 h; 20-24 h; 28-32 h; 36-40 h; 48 h and 72 h) of admission for bilirubin measurement and blood for complete blood count, bilirubin, alanine (ALT) and aspartate aminotransferases (AST) assays. For comparison we studied patients with single left thoracic penetrating injury. Forty-two patients with RST injuries were included. All had liver and lung injuries confirmed by CT scans. Only one patient failed non-operative management. Chest tube bilirubin peaked at 48 h post-trauma (mean 3.3+/-4.1 mg/dL) and was always higher than both serum bilirubin (pchest tube effluent from control group (27 patients with left side thoracic trauma). Serum ALT and AST were higher in RST injury patients (ptrauma appears to be safe. Bile originating from the liver injury reaches the right thoracic cavity but does not reflect the severity of that injury. The highest concentration was found in the patient failing non-operative management. The presence of intrathoracic bile in selected patients who sustain RST penetrating trauma, with liver injury, does not preclude non-operative management. Our study suggests that monitoring chest tube effluent bilirubin may provide helpful information when managing a patient non-operatively.

Long-term behavior of aortic intramural hematomas and penetrating ulcers.

Science.gov (United States)

Chou, Alan S; Ziganshin, Bulat A; Charilaou, Paris; Tranquilli, Maryann; Rizzo, John A; Elefteriades, John A

2016-02-01

For intramural hematoma and penetrating atherosclerotic ulcer, long-term behavior and treatment are controversial. This study evaluates the long-term behavior of intramural hematoma and penetrating atherosclerotic ulcer, including radiologic follow-up and survival analysis. Between 1995 and 2014, 108 patients (mean age, 70.8 ± 10 years; 56% female) presented with intramural hematoma or penetrating atherosclerotic ulcer to Yale-New Haven Hospital (New Haven, Conn). We reviewed the medical records, radiology, and online mortality databases. Ten of 55 patients (18%) with intramural hematoma and 17 of 53 patients (32%) with penetrating atherosclerotic ulcer had rupture state symptoms on admission, both greater than type A (8%) or type B dissection (4%) (P hematoma with follow-up imaging, 8 of 14 (57%) worsened (mean follow-up, 9.4 months) and 6 (43%) underwent late surgery. For patients with penetrating atherosclerotic ulcer with follow-up imaging, 6 of 20 (30%) worsened and underwent late surgery, and 11 (55%) showed no change (mean follow-up, 34.3 months). Overall survivals were 77%, 70%, 58%, and 33% at 1, 3, 5, and 10 years, respectively. No operative deaths occurred for patients with nonrupture state. Patients with penetrating atherosclerotic ulcer with initial surgical treatment had better long-term survival than patients treated medically (P = .037). In the intramural hematoma group, no such difference was observed (P = .10). At presentation, the incidence of early rupture of intramural hematoma and penetrating atherosclerotic ulcer was higher than for typical dissection. For branch vessels, intramural hematoma never occludes branch arteries. On imaging follow-up, patients with intramural hematoma and penetrating atherosclerotic ulcer rarely improved, with late surgery commonly needed. Better survival was observed for the initial surgical management of patients with penetrating atherosclerotic ulcer compared with initial medical management. Copyright © 2016

Percutaneous penetration of [sup 3]H-Huangbai extracts and H[sup 3]-berberine

Energy Technology Data Exchange (ETDEWEB)

Xipeng, Jin; Xiaozhong, Yu [School of Public Health, Shanghai Medical Univ. (China); Nianbao, Zhang; Jianwen, Kuang [Shanghai Inst. of Nuclear Research Acdemic Sinica (China)

1992-02-01

The percutaneous penetration of [sup 3]H-huangbai extracts and [sup 3]H-berberine through excised guinea pig and human shins was studied using the static diffusion cell technique. The data were treated with mathematical model of skin absorption. The results showed that huangbai extracts and berberine could penetrate the guinea pig and human skins at (above) dose of 8.38 [mu]g/cm[sup 2] and 14.32 [mu]g/cm[sup 2], respectively. The amount and rate of penetration increased linearly with the time of exposure and dose. The permeability of berberine through guinea pig and human skins in two vehicles (water and glycol) was lower than that of huangbai extracts. When Huangbai extracts and berberine were applied in glycol solution, the vehicle greatly enhanced the penetration of the two penetrant. The lag time of two penetrant through human skin was longer than that through guinea pig skin.

Penetration of a magnetic field into superconducting lead and lead-indium alloys

International Nuclear Information System (INIS)

Egloff, C.; Raychaudhuri, A.K.; Rinderer, L.

1983-01-01

The temperature dependence of the magnetic field penetration depth of superconducting lead and lead-indium alloys has been studied over the temperature range between about 2 K and T/sub c/. Data are analyzed in terms of the microscopic theory. The difficulties of a unique analysis of the penetration data are pointed out and a strategy for the analysis is discussed. The penetration depth at T = 0K for pure lead is determined as 522 A. This value, though higher than the previously accepted value for lead, is nevertheless consistent with the strong coupling character of lead

Penetration of sub-micron aerosol droplets in composite cylindrical filtration elements

International Nuclear Information System (INIS)

Geurts, Bernard J.; Pratte, Pascal; Stolz, Steffen; Stabbert, Regina; Poux, Valerie; Nordlund, Markus; Winkelmann, Christoph

2011-01-01

Advection-diffusion transport of aerosol droplets in composite cylindrical filtration elements is analyzed and compared to experimental data. The penetration, characterizing the fraction of droplets that passes through the pores of a filtration element, is quantified for a range of flow rates. The advection-diffusion transport in a laminar Poiseuille flow is treated numerically for slender pores using a finite difference approach in cylindrical coordinates. The algebraic dependence of the penetration on the Peclet number as predicted theoretically, is confirmed by experimental findings at a variety of aspect ratios of the cylindrical pores. The effective penetration associated with a composite filtration element consisting of a set of parallel cylindrical pores is derived. The overall penetration of heterogeneous composite filtration elements shows an algebraic dependence to the fourth power on the radii of the individual pores that are contained. This gives rise to strong variations in the overall penetration in cases with uneven distributions of pore sizes, highly favoring filtration by the larger pores. The overall penetration is computed for a number of basic geometries, providing a point of reference for filtration design and experimental verification.

Computational fluid dynamic analysis of a closure head penetration in a pressurized water reactor

Energy Technology Data Exchange (ETDEWEB)

Forsyth, D.R.; Schwirian, R.E. [Westinghouse Electric Corp., Pittsburgh, PA (United States)

1995-09-01

ALLOY 600 has been used typically for penetrations through the closure head in pressurized water reactors because of its thermal compatibility with carbon steel, superior resistance to chloride attack and higher strength than the austenitic stainless steels. Recent plant operating experience with this alloy has indicated that this material may be susceptible to degradation. One of the major parameters relating to degradation of the head penetrations are the operational temperatures and stress levels in the penetration.

Characteristics of rain penetration through a gravity ventilator used for natural ventilation.

Science.gov (United States)

Kim, Taehyeung; Lee, Dong Ho; Ahn, Kwangseog; Ha, Hyunchul; Park, Heechang; Piao, Cheng Xu; Li, Xiaoyu; Seo, Jeoungyoon

2008-01-01

Gravity ventilators rely simply on air buoyancy to extract air and are widely used to exhaust air contaminants and heat from workplaces using minimal energy. They are designed to maximize the exhaust flow rate, but the rain penetration sometimes causes malfunctioning. In this study, the characteristics of rain penetration through a ventilator were examined as a preliminary study to develop a ventilator with the maximum exhaust capacity while minimizing rain penetration. A model ventilator was built and exposed to artificial rain and wind. The paths, intensities and amounts of penetration through the ventilator were observed and measured in qualitative and quantitative fashions. In the first phase, the pathways and intensities of rain penetration were visually observed. In the second phase, the amounts of rain penetration were quantitatively measured under the different configurations of ventilator components that were installed based on the information obtained in the first-phase experiment. The effects of wind speed, grill direction, rain drainage width, outer wall height, neck height and leaning angle of the outer wall from the vertical position were analyzed. Wind speed significantly affected rain penetration. Under the low crosswind conditions, the rain penetration intensities were under the limit of detection. Under the high crosswind conditions, grill direction and neck height were the most significant factors in reducing rain penetration. The installation of rain drainage was also important in reducing rain penetration. The experimental results suggest that, with proper configurations of its components, a gravity ventilator can be used for natural ventilation without significant rain penetration problems.

Penetration of molten core materials into basaltic and limestone concrete

International Nuclear Information System (INIS)

Sutherland, H.J.

1978-01-01

In conjunction with the small-scale, melt-concrete interaction tests being conducted at Sandia Laboratories, an acoustic technique has been used to monitor the penetration of molten core materials into basaltic and limestone concrete. Real time plots of the position of the melt/concrete interface have been obtained, and they illustrate that the initial penetration rate of the melt may be of the order of 80 mm/min. Phenomena deduced by the technique include a non-wetted melt/concrete interface

Investigation of environmental natural penetrating radiation level in Anhui province

International Nuclear Information System (INIS)

Zhu Jingqiu; Chen Shuping; Jiang Shan; Zhu Xingsheng; Huang Jiangbin; Wu Chuanyong; Wang Weining

1992-01-01

The methods and results of the investigation on natural penetrating radiation level in Anhui Province in 1987 are presented. The results show that: (1) The point-weighted, area-weighted and population-weighted average value of natural γ radiation dose rate for field is 5.67, 5.62 and 5.55 x 10 -8 Gy· -1 , respectively; (2) The point-weighted average value of natural γ radiation dose rate for road is 5.38 x 10 -8 Gy·h -1 ; (3) The point-weighted and population-weighted average value of natural γ radiation dose rate inside buildings is 9.59 and 9.36 x 10 -8 Gy·h -1 , respectively; (4) The point-weighted and population-weighted average value of the dose rate inside buildings from cosmic ray is 2.64 and 2.62 x 10 -8 ·h -1 , and outside buildings is 2.95 and 2.94 x 10 -8 ·h -1 , respectively; (5) The point-weighted and population-weighted average value of natural penetrating radiation dose rate inside buildings is 12.23 and 11.99 x 10 -8 Gy·h -1 , outside buildings is 8.62 and 8.49 x 10 -8 ·h -1 , respectively; (6) The annual effective dose equivalent from natural γ radiation, cosmic ray and natural penetrating radiation is 0.51, 0.24, and 0.75 mSv, respectively; and correspondingly, the annual collective effective dose equivalent is 2.5, 1.2 and 3.7 x 10 4 man·Sv, respectively

Vena Cava Filter Retrieval with Aorto-Iliac Arterial Strut Penetration.

Science.gov (United States)

Holly, Brian P; Gaba, Ron C; Lessne, Mark L; Lewandowski, Robert J; Ryu, Robert K; Desai, Kush R; Sing, Ronald F

2018-05-03

To evaluate the safety and technical success of inferior vena cava (IVC) filter retrieval in the setting of aorto-iliac arterial strut penetration. IVC filter registries from six large United States IVC filter retrieval practices were retrospectively reviewed to identify patients who underwent IVC filter retrieval in the setting of filter strut penetration into the adjacent aorta or iliac artery. Patient demographics, implant duration, indication for placement, IVC filter type, retrieval technique and technical success, adverse events, and post procedural clinical outcomes were identified. Arterial penetration was determined based on pre-procedure CT imaging in all cases. The IVC filter retrieval technique used was at the discretion of the operating physician. Seventeen patients from six US centers who underwent retrieval of an IVC filter with at least one strut penetrating either the aorta or iliac artery were identified. Retrieval technical success rate was 100% (17/17), without any major adverse events. Post-retrieval follow-up ranging from 10 days to 2 years (mean 4.6 months) was available in 12/17 (71%) patients; no delayed adverse events were encountered. Findings from this series suggest that chronically indwelling IVC filters with aorto-iliac arterial strut penetration may be safely retrieved.

Tumor penetrating peptides

Directory of Open Access Journals (Sweden)

Tambet eTeesalu

2013-08-01

Full Text Available Tumor-homing peptides can be used to deliver drugs into tumors. Phage library screening in live mice has recently identified homing peptides that specifically recognize the endothelium of tumor vessels, extravasate, and penetrate deep into the extravascular tumor tissue. The prototypic peptide of this class, iRGD (CRGDKGPDC, contains the integrin-binding RGD motif. RGD mediates tumor homing through binding to αv integrins, which are selectively expressed on various cells in tumors, including tumor endothelial cells. The tumor-penetrating properties of iRGD are mediated by a second sequence motif, R/KXXR/K. This C-end Rule (or CendR motif is active only when the second basic residue is exposed at the C-terminus of the peptide. Proteolytic processing of iRGD in tumors activates the cryptic CendR motif, which then binds to neuropilin-1 activating an endocytic bulk transport pathway through tumor tissue. Phage screening has also yielded tumor-penetrating peptides that function like iRGD in activating the CendR pathway, but bind to a different primary receptor. Moreover, novel tumor-homing peptides can be constructed from tumor-homing motifs, CendR elements and protease cleavage sites. Pathologies other than tumors can be targeted with tissue-penetrating peptides, and the primary receptor can also be a vascular zip code of a normal tissue. The CendR technology provides a solution to a major problem in tumor therapy, poor penetration of drugs into tumors. The tumor-penetrating peptides are capable of taking a payload deep into tumor tissue in mice, and they also penetrate into human tumors ex vivo. Targeting with these peptides specifically increases the accumulation in tumors of a variety of drugs and contrast agents, such as doxorubicin, antibodies and nanoparticle-based compounds. Remarkably the drug to be targeted does not have to be coupled to the peptide; the bulk transport system activated by the peptide sweeps along any compound that is

Investigation of environmental natural penetrating radiation level in inner mongolia

International Nuclear Information System (INIS)

Li Wenyuan; Du Xuelin; Zhang Baozhong; Fu Su; Chen Jun; Zhang Wenhai

1990-01-01

The scheme, quality assurance measure, and results for environmental natural penetrating radiation level investigation in Inner Mongolia Autonomous Region was reported. Over the whole Region area of more than 1.18 million km 2 , 1018 net grid measuring points were selected with grid spacing of 25 x 25 km. The range of natural environmental terrestrial γ-radiation air absorbed dose rate over fields was (0.96-18.62) x 10 -8 Gy·h -1 , the range of γ-radiatoin dose rate over road was (1.07-26.08) x 10 -8 Gy·h -1 , the mean was 5.92 x 10 -8 Gy·h -1 ; the range of γ-radiation dose rate in buildings was (3.82-18.94) x 10 -8 Gy·h -1 ; the range of outdoor air absorbed dose rate caused by ionization compnents of cosmic rays was (3.12-5.55) x 10 -8 Gy·h -1 , while indoor range was (2.60-4.66) x 10 -8 Gy·h -1 ; the range of outdoor natural penetrating radiation dose rate was (8.31-11.26) x 10 -8 Gy·h -1 , indoor range was (11.20-14.67) x 10 -8 Gy·h -1 ; annual average individual effective dose equivalent and annual collective effective dose equivalent caused by natural penetrating radiatoin were 0.84 mSv and 1.61 x 10 4 man·Sv respectively. The georgaphical distribution of terrestrial γ-radiation dose rate within all region was reprted, the increase of environmental terrestial γ-radiation caused by human activity was also pointed. This ought to be paid enough attention to

Evaluation of nicotinamide microemulsion on the skin penetration enhancement.

Science.gov (United States)

Boonme, Prapaporn; Boonthongchuay, Chalida; Wongpoowarak, Wibul; Amnuaikit, Thanaporn

2016-01-01

This study purposed to evaluate a microemulsion containing nicotinamide for its characteristics, stability, and skin penetration and retention comparing with a solution of nicotinamide in 2:1 mixture of water and isopropyl alcohol (IPA). The microemulsion system was composed of 1:1 mixture of Span80 and Tween80 as a surfactant mixture, isopropyl palmitate (IPP) as an oil phase, and 2:1 mixture of water and IPA as an aqueous phase. Nicotinamide microemulsion was prepared by dissolving the active in the aqueous phase before simply mixing with the other components. It was determined for its characteristics and stability under various conditions. The skin penetration and retention studies of nicotinamide microemulsion and solution were performed by modified Franz diffusion cells, using newborn pig skin as the membrane. The results showed that nicotinamide microemulsion could be obtained as clear yellowish liquid, was water-in-oil (w/o) type, possessed Newtonian flow, and exhibited physicochemical stability when kept at 4 °C and room temperature (≈30 ± 2 °C) during 3 months. From the skin penetration data, the microemulsion could enhance the skin penetration of nicotinamide comparing with the solution. Additionally, nicotinamide microemulsion could provide much higher amount of skin retention than that of skin penetration, resulting in suitability for a cosmeceutical product.

Deep penetration of light into biotissue

Science.gov (United States)

Bearden, Edward D.; Wilson, James D.; Zharov, Vladimir P.; Lowery, Curtis L.

2001-07-01

The results of a study of deep (several centimeters) light penetration into biological tissue are presented in order to estimate its significance to potentially photosensitive structures and processes including the fetal eyes. In order to accomplish this goal, samples of various tissues (fat, muscle, and uterus) from surgical patients and autopsies were examined with a double integrating sphere arrangement to determine their optical properties. The results were implemented in a Monte Carlo modeling program. Next, optical fiber probes were inserted into the uterus and abdominal wall of patients undergoing laparoscopic procedures. The fibers were couples to a photomultiplier tube with intervening filters allowing measurements of light penetration at various wavelengths. To determine the feasibility of stimulation in utero, a xenon lamp and waveguide were used to transilluminate the abdomen of several labor patients. Light in the range of 630 to 670 nm where the eye sensitivity and penetration depth are well matched, will likely provide the best chance of visual stimulation. Fetal heart rate, fetal movement, and fetal magnetoencephalography (SQUID) and electroencephalography (EEG) were observed in different studies to determine if stimulation has occurred. Since internal organs and the fetus are completely dark adapted, the amount of light required to simulate in our opinion could be on the order of 10(superscript -8 Watts.

Impurity penetration and transport during VH-mode on DIII-D

International Nuclear Information System (INIS)

Lippmann, S.I.; Evans, T.E.; Jackson, G.L.; West, W.P.

1992-05-01

A new modeling effort is made in order to understand the observed relatively low levels of impurity contamination during the VH-mode phase on DIII-D, as compared to those observed during the H-mode phase of selected discharges. The key element is the inclusion of the real 2-D flux surface geometry in the prediction of impurity penetration of sputtered atoms through the scrape-off layer into the core plasma. Of the elements which determine the impurity content in the plasma: sputtering yield, penetration, and core transport, the penetration through the scrape-off layer is found to be the most determinative factor. The low impurity content in VH-mode is attributed to the development of a scrape-off layer with higher density and temperature properties than those normally obtained in H-mode

Deep ocean model penetrator experiments

International Nuclear Information System (INIS)

Freeman, T.J.; Burdett, J.R.F.

1986-01-01

Preliminary trials of experimental model penetrators in the deep ocean have been conducted as an international collaborative exercise by participating members (national bodies and the CEC) of the Engineering Studies Task Group of the Nuclear Energy Agency's Seabed Working Group. This report describes and gives the results of these experiments, which were conducted at two deep ocean study areas in the Atlantic: Great Meteor East and the Nares Abyssal Plain. Velocity profiles of penetrators of differing dimensions and weights have been determined as they free-fell through the water column and impacted the sediment. These velocity profiles are used to determine the final embedment depth of the penetrators and the resistance to penetration offered by the sediment. The results are compared with predictions of embedment depth derived from elementary models of a penetrator impacting with a sediment. It is tentatively concluded that once the resistance to penetration offered by a sediment at a particular site has been determined, this quantity can be used to sucessfully predict the embedment that penetrators of differing sizes and weights would achieve at the same site

HMO market penetration and hospital cost inflation in California.

Science.gov (United States)

Robinson, J C

1991-11-20

OBJECTIVE--Health maintenance organizations (HMOs) have stimulated price competition in California hospital markets since 1983, when the state legislature eliminated barriers to selective contracting by conventional health insurance plans. This study measures the impact of HMO-induced price competition on the rate of inflation in average cost per admission for 298 private, non-HMO hospitals between 1982 and 1988. DATA--HMO market penetration was calculated using discharge abstract data on insurance coverage, ZIP code of residence, and hospital of choice for 3.35 million patients in 1983 and 3.41 million patients in 1988. Data on hospital characteristics were obtained from the American Hospital Association and other sources. -HMO coverage grew from an average of 8.3% of all admissions in local hospital markets in 1983 to 17.0% of all admissions in 1988. The average rate of growth in costs per admission between 1982 and 1988 was 9.4% lower in markets with relatively high HMO penetration compared with markets with relatively low HMO penetration (95% confidence interval, 5.2 to 13.8). Cost savings for these 298 hospitals are estimated at $1.04 billion for 1988. CONCLUSION--Price competition between HMOs and conventional health insurers can significantly reduce hospital cost inflation if legislative barriers to selective contracting are removed. The impact of competition in California was modest, however, when evaluated in terms of the 74.5% average rate of California hospital cost inflation during these years.

A New Nano-Chitosan Irrigant with Superior Smear Layer Removal and Penetration

Directory of Open Access Journals (Sweden)

Mohammad Kassaee

2016-07-01

Full Text Available Our primary objective was to measure root canal penetrations of aqueous antibacterial nano-chitosan (Nano-CS, for the first time. The second objective was to compare and contrast such penetrations to those of chitosan (CS itself, as well as sodium hypochlorite (NaOCl, chlorhexidine (CHX and ethylenediamintetraacetic acid (EDTA, at the routinely used concentrations. Molar roots were split longitudinally by a rotary diamond saw. Nano-CS was made by dissolving CS in acetic acid and adding tripolyphosphate (TPP, followed by a freeze-drying process. Dentin penetrations are estimated through measurements of sessile contact angles. Penetrations of the probed irrigants were assessed as inverse functions of their sessile contact angles. Accordingly, all Nano-CS solutions showed smaller sessile angles compared to those of NaOCl, CS, and EDTA samples. Hence, Nano-CS appeared to be a superior irrigant for demonstrating a higher penetration than the latter three. It fell only behind CHX, yet, the superb chelating ability of Nano-CS enabled it to remove smear layer to a larger extend than all of our other irrigants including CHX. Nano-CS could be considered as a new irrigant. Higher penetration was its main advantage over CS, and commercial NaOCl, and EDTA. This was verified by  the smaller sessile contact angle of Nano-CS. Anticipated chelating effect of Nano-CS could anchor more efficient removal of smear layer. This was another advantage of Nano-CS over other irrigants including CHX. Other advantages of Nano-CS included its reported biocompatibility, biodegradability and antibacterial effects. Commercialization of Nano-CS was deemed in the near horizon.

A 10-year Ground-Based Radar Climatology of Convective Penetration of Stratospheric Intrusions and Associated Large-Scale Transport over the CONUS

Science.gov (United States)

Homeyer, C. R.

2017-12-01

Deep convection reaching the upper troposphere and lower stratosphere (UTLS) and its impact on atmospheric composition through rapid vertical transport of lower troposphere air and stratosphere-troposphere exchange has received increasing attention in the past 5-10 years. Most efforts focused on convection have been directed toward storms that reach and/or penetrate the coincident environmental lapse-rate tropopause. However, convection has also been shown to reach into large-scale stratospheric intrusions (depressions of stratospheric air lying well below the lapse-rate tropopause on the cyclonic side of upper troposphere jet streams). Such convective penetration of stratospheric intrusions is not captured by studies of lapse-rate tropopause-penetrating convection. In this presentation, it will be shown using hourly, high-quality mergers of ground-based radar observations from 2004 to 2013 in the contiguous United States (CONUS) and forward large-scale trajectory analysis that convective penetration of stratospheric intrusions: 1) is more frequent than lapse-rate tropopause-penetrating convection, 2) occurs over a broader area of the CONUS than lapse-rate tropopause-penetrating convection, and 3) can influence the composition of the lower stratosphere through large-scale advection of convectively influenced air to altitudes above the lapse-rate tropopause, which we find to occur for about 8.5% of the intrusion volumes reached by convection.

Investigation of environmental natural penetrating radiation in Shanxi Province

International Nuclear Information System (INIS)

Li Junshan; Chen Baotian; Zhang Runrun; He Zeyong; Li Jinfu

1990-01-01

The methods and results of the investigation on natural penetrating radiation level in Shanxi Province are presented. 262 25 x 25 km-netted measuring points were set unformly up all over the province, with 255 densely measuring points of different types added. The results showed that: (1) The point-weighted, area-weighted and population-weighted average value of natural γ radiation dose rate over field was 5.39, 5.41 and 5.43 x 10 -8 Gy·h -1 , respectively; (2) The point-weighted average value of natural γ radiation dose rate over road was 4.84 x 10 -8 Gy·h -1 ; (3) The point-weighted and population-weighted average value of natural γ radiation dose rate inside buildings was 8.09 and 8.24 x 10 -8 Gy·h -1 ; (4) The point-weighted and population-weighted average value of the dose rate inside buildings from cosmic ray was 3.46 and 3.36 x 10 -8 Gy·h -1 , and outside buildings was 3.85 and 3.73 x 10 -8 Gy·h -1 , respectively; (5) The point-weighted and population-weighted average value of natural penetrating radiation dose rate inside buildings was 11.55 and 11.60 x 10 -8 Gy·h -1 and outside buildidngs was 8.97 and 8.42 x 10 -8 Gy·h -1 , respectively; (6) The annual effective dose equivalent from natural γ radiation, cosmic ray and natural penetrating radiation was 0.46, 0.30 and 0.76 mSv, respectively, and correspondingly, the annual collective effective dose equivalent was 1.2, 0.77 and 2.0 x 10 4 man·Sv, respectively

Penetrative and dislodgeable residue characteristics of 14C-insecticides in apple fruit.

Science.gov (United States)

Mota-Sanchez, David; Cregg, Bert; Hoffmann, Eric; Flore, James; Wise, John C

2012-03-28

Infinite- and finite-dose laboratory experiments were used to study the penetrative and dislodgeable residue characteristics of (14)C-insecticides in apple fruit. The differences in dislodgeable and penetrated residues of three radiolabeled insecticides ((14)C-thiamethoxam, (14)C-thiacloprid, and (14)C-indoxacarb), applied in aqueous solution with commercial formulations, were determined after water and methanol wash extractions. The rate of sorption and extent of penetration into the fruit cuticles and hypanthium of two apple cultivars were measured after 1, 6, and 24 h of treatment exposure, using radioactivity quantification methods. For all three compounds, 97% or more of the treatment solutions were found on the fruit surface as some form of non-sorbed residues. For indoxacarb, sorption into the epicuticle was rapid but desorption into the fruit hypanthium was delayed, indicative of a lipophilic penetration pathway. For the neonicotinoids, initial cuticular penetration was slower but with no such delay in desorption into the hypanthium.

Effect of microneedle geometry and supporting substrate on microneedle array penetration into skin.

Science.gov (United States)

Kochhar, Jaspreet Singh; Quek, Ten Cheer; Soon, Wei Jun; Choi, Jaewoong; Zou, Shui; Kang, Lifeng

2013-11-01

Microneedles are being fast recognized as a useful alternative to injections in delivering drugs, vaccines, and cosmetics transdermally. Owing to skin's inherent elastic properties, microneedles require an optimal geometry for skin penetration. In vitro studies, using rat skin to characterize microneedle penetration in vivo, require substrates with suitable mechanical properties to mimic human skin's subcutaneous tissues. We tested the effect of these two parameters on microneedle penetration. Geometry in terms of center-to-center spacing of needles was investigated for its effect on skin penetration, when placed on substrates of different hardness. Both hard (clay) and soft (polydimethylsiloxane, PDMS) substrates underneath rat skin and full-thickness pig skin were used as animal models and human skins were used as references. It was observed that there was an increase in percentage penetration with an increase in needle spacing. Microneedle penetration with PDMS as a support under stretched rat skin correlated better with that on full-thickness human skin, while penetration observed was higher when clay was used as a substrate. We showed optimal geometries for efficient penetration together with recommendation for a substrate that could better mimic the mechanical properties of human subcutaneous tissues, when using microneedles fabricated from poly(ethylene glycol)-based materials. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

The penetrating depth analysis of Lunar Penetrating Radar onboard Chang’e-3 rover

Science.gov (United States)

Xing, Shu-Guo; Su, Yan; Feng, Jian-Qing; Dai, Shun; Xiao, Yuan; Ding, Chun-Yu; Li, Chun-Lai

2017-04-01

Lunar Penetrating Radar (LPR) has successfully been used to acquire a large amount of scientific data during its in-situ detection. The analysis of penetrating depth can help to determine whether the target is within the effective detection range and contribute to distinguishing useful echoes from noise. First, this study introduces two traditional methods, both based on a radar transmission equation, to calculate the penetrating depth. The only difference between the two methods is that the first method adopts system calibration parameters given in the calibration report and the second one uses high-voltage-off radar data. However, some prior knowledge and assumptions are needed in the radar equation and the accuracy of assumptions will directly influence the final results. Therefore, a new method termed the Correlation Coefficient Method (CCM) is provided in this study, which is only based on radar data without any a priori assumptions. The CCM can obtain the penetrating depth according to the different correlation between reflected echoes and noise. To be exact, there is a strong correlation in the useful reflected echoes and a random correlation in the noise between adjacent data traces. In addition, this method can acquire a variable penetrating depth along the profile of the rover, but only one single depth value can be obtained from traditional methods. Through a simulation, the CCM has been verified as an effective method to obtain penetration depth. The comparisons and analysis of the calculation results of these three methods are also implemented in this study. Finally, results show that the ultimate penetrating depth of Channel 1 and the estimated penetrating depth of Channel 2 range from 136.9 m to 165.5 m ({\\varepsilon }r=6.6) and from 13.0 m to 17.5 m ({\\varepsilon }r=2.3), respectively.

Penetration of gold nanoparticles across the stratum corneum layer of thick-Skin.

Science.gov (United States)

Raju, Gayathri; Katiyar, Neeraj; Vadukumpully, Sajini; Shankarappa, Sahadev A

2018-02-01

Transdermal particulate penetration across thick-skin, such as that of palms and sole, is particularly important for drug delivery for disorders such as small fiber neuropathies. Nanoparticle-based drug delivery across skin is believed to have much translational applications, but their penetration especially through thick-skin, is not clear. This study specifically investigates the effectiveness of gold nanoparticles (AuNPs) for thick-skin penetration, especially across the stratum corneum (SC) as a function of particle size. The thick-skinned hind-paw of rat was used to characterize depth and distribution of AuNPs of varying sizes, namely, 22±3, 105±11, and 186±20nm. Epidermal penetration of AuNPs was characterized both, in harvested skin from the hind-paw using a diffusion chamber, as well as in vivo. Harvested skin segments exposed to 22nm AuNPs for only 3h demonstrated higher penetration (pthick-skin allows nanoparticle penetration and acts as a depot for release of AuNPs into circulation long after the initial exposure has ceased. Copyright © 2017 Japanese Society for Investigative Dermatology. Published by Elsevier B.V. All rights reserved.

In-place HEPA filter penetration test

International Nuclear Information System (INIS)

Bergman, W.; Wilson, K.; Elliott, J.; Bettencourt, B.; Slawski, J.W.

1997-01-01

We have demonstrated the feasibility of conducting penetration tests on high efficiency particulate air (HEPA) filters as installed in nuclear ventilation systems. The in-place penetration test, which is designed to yield equivalent penetration measurements as the standard DOP efficiency test, is based on measuring the aerosol penetration of the filter installation as a function of particle size using a portable laser particle counter. This in-place penetration test is compared to the current in-place leak test using light scattering photometers for single HEPA filter installations and for HEPA filter plenums using the shroud method. Test results show the in-place penetration test is more sensitive than the in-place leak test, has a similar operating procedure, but takes longer to conduct. Additional tests are required to confirm that the in-place penetration test yields identical results as the standard dioctyl phthalate (DOP) penetration test for HEPA filters with controlled leaks in the filter and gasket and duct by-pass leaks. Further development of the procedure is also required to reduce the test time before the in- place penetration test is practical

Effect of neoclassical toroidal viscosity on error-field penetration thresholds in tokamak plasmas.

Science.gov (United States)

Cole, A J; Hegna, C C; Callen, J D

2007-08-10

A model for field-error penetration is developed that includes nonresonant as well as the usual resonant field-error effects. The nonresonant components cause a neoclassical toroidal viscous torque that keeps the plasma rotating at a rate comparable to the ion diamagnetic frequency. The new theory is used to examine resonant error-field penetration threshold scaling in Ohmic tokamak plasmas. Compared to previous theoretical results, we find the plasma is less susceptible to error-field penetration and locking, by a factor that depends on the nonresonant error-field amplitude.

A Statistical Analysis of Industrial Penetration and Internet Intensity in Taiwan

Directory of Open Access Journals (Sweden)

Chia-Lin Chang

2018-03-01

Full Text Available This paper is the first to investigate the effect of industrial penetration (geographic concentration of industries and internet intensity (the proportion of enterprises that uses the internet for Taiwan manufacturing firms, and analyses whether the relationships are substitutes or complements. The sample observations are based on a unique set of data, namely 153,081 manufacturing plants, and covers 26 two-digit industry categories and 358 geographical townships in Taiwan. The Heckman sample selection model is used to accommodate sample selectivity for unobservable data for firms that use the internet. The empirical results from Heckman’s two-stage estimation show that: (1 a higher degree of industrial penetration will not affect the probability that firms will use the internet, but it will affect the total expenditure on internet intensity; (2 for two-digit SIC (Standard Industrial Classification industries, industrial penetration generally decreases the total expenditure on internet intensity; and, (3 industrial penetration and internet intensity are substitutes.

On the Inertia Term of Projectile's Penetration Resistance

Directory of Open Access Journals (Sweden)

Yu Shan

2013-01-01

Full Text Available The effect of the target inertia term of rigid kinetic energy projectiles (KEP’s penetration resistance is investigated using nonlinear dynamic code LS-DYNA and four constitutive models. It is found that the damage number of target can be used to measure the influence of the inertia term. The smaller the damage number is, the less influence the inertia term has. The less dependent the resistance has on projectile velocity, the more accurate it is to treat the resistance as a constant. For the ogive-nose projectile with CRH of 3, when the target is aluminum, steel, or other metals, the threshold velocity for the constant resistance is at least 1258 m/s; when the target is concrete, rock, or other brittle materials, if the velocity of the projectile is greater than 400 m/s or so, the damage number would be very large, and the penetration resistance would clearly depend on the projectile’s velocity. The higher the elastic wave velocity is, the more penetration process is affected by the impact face.

Investigation of environmental natural penetrating radiation level in Hebei province

International Nuclear Information System (INIS)

Zheng Deliang; Wang Shuming; Yang Huanfeng

1990-01-01

The methods and results of the investigation on natural penetrating radiation level in Hebei Province from 1985 to 1987 are presented. 285 25 x 25 km-netted measuring points were set unformly up all over the porvince, with 204 densely measuring points of different types added. The results show that: (1) The point-weighted, area-weighted and population-weighted average value of natural γ radiation dose rate for field is 5.59, 5.51 and 5.31 x 10 -8 Gy·h -1 , respectively; (2) The point-weighted and population-weighted average value of the dose rate inside buildings from cosmic ray is 3.05 and 2.80 x 10 -8 Gy·h -1 , and outside buildings is 3.38 and 3.11 x 10 -8 Gy·h -1 , respectively; (3) The point-weighted and population-weighted average value of natural penetrating radiation dose rate inside buildings is 12.44 and 11.97 x 10 -8 Gy·h -1 , outside buildings is 8.97 and 8.42 x 10 -8 Gy·h -1 , respectively; (4) The annual effective dose equivalent from natural γ radiation, cosmic ray and natural penetrating radiation is 0.50, 0.25, and 0.75 mSv, respectively; and correspondingly, the annual collective effectiv dose equivalent is 2.7, 1.3 and 4.0 x 10 4 man·Sv, respectively

Kinetic instability of electrostatic ion cyclotron waves in inter-penetrating plasmas

Science.gov (United States)

Bashir, M. F.; Ilie, R.; Murtaza, G.

2018-05-01

The Electrostatic Ion Cyclotron (EIC) instability that includes the effect of wave-particle interaction is studied owing to the free energy source through the flowing velocity of the inter-penetrating plasmas. It is shown that the origin of this current-less instability is different from the classical current driven EIC instability. The threshold conditions applicable to a wide range of plasma parameters and the estimate of the growth rate are determined as a function of the normalized flowing velocity ( u0/vt f e ), the temperature ( Tf/Ts ) and the density ratios ( nf 0/ns 0 ) of flowing component to static one. The EIC instability is driven by either flowing electrons or flowing ions, depending upon the different Doppler shifted frequency domains. It is found that the growth rate for electron-driven instability is higher than the ion-driven one. However, in both cases, the denser (hotter) is the flowing plasma, the lesser (greater) is the growth rate. The possible applications related to the terrestrial solar plasma environment are also discussed.

Penetration portion shielding structure

International Nuclear Information System (INIS)

Hayashi, Katsumi; Narita, Hitoshi; Handa, Hiroyuki; Takeuchi, Jun; Tozuka, Fumio.

1994-01-01

Openings of a plurality of shieldings for penetration members are aligned to each other, and penetration members are inserted from the openings. Then, the openings of the plurality of shielding members are slightly displaced with each other to make the penetration portions into a helical configuration, so that leakage of radiation is reduced. Upon removal of the members, reverse operation is conducted. When a flowable shielding material is used, the penetration portions are constituted with two plates having previously formed openings and pipes for connecting the openings with each other and a vessel covering the entire of them. After passing the penetration members such as a cable, the relative position of the two plates is changed by twisting, to form a helical configuration which reduces radiation leakage. Since they are bent into the helical configuration, shielding performance is extremely improved compared with a case that radiation leakage is caused from an opening of a straight pipe. In addition, since they can be returned to straight pipes, attachment, detachment and maintenance can be conducted easily. (N.H.)

Investigation of environmental natural penetrating radiation level in Hubei Province

International Nuclear Information System (INIS)

Zhang Sihui; Zhang Jiaxian

1992-01-01

The methods and results of the investigation on natural penetrating radiation level in Hubei Province are presented, 290 measuring points of 25 x 25 km-grid were set uniformly up all over the province, with 385 densely measuring points of different types added. The results show that: (1) The area-weighted, population-weighted and point-weighted average value of natural γ radiation dose rate for field is 60.8, 58.5 and 60.9 nGy ·h -1 , respectively; (2) The point-weighted average value of natural γ radiation dose rate for road is 55.3 nGy·h -1 ; (3) The population-weighted and point-weighed average value of natural γ radiation dose rate inside buildings is 94.5 and 93.2 x 10 nGy·h -1 , respectively; (4) The point-weighted and population-weighted average value of the dose rate inside buildings from cosmic ray is 27.8 and 26.3 nGy·h -1 , and outside buildings is 31.8 and 30.4 nGy·h -1 , respectively; (5) The point-weighted and population-weighted average value of natural penetrating radiation dose rate inside building is 121.0 and 120.7 nGy·h -1 , outside buildings is 92.8 and 88.9 nGy·h -1 , respectively; (6) The annual effective dose equivalent from cosmic ray, natural γ radiation and natural penetrating radiation is 0.24, 0.52 and 0.76 mSv, respectively; and correspondingly, the annual collective effective dose equivalent is 1.2, 2.5 and 3.7 x 10 4 man·Sv, respectively

Investigation of environmental natural penetrating radiation level in Heilongjiang Province

International Nuclear Information System (INIS)

Liu Yuncheng; Wu Chengxiang; Zhang Juling; Zhao Defeng

1994-01-01

The methods and results of the investigation on natural penetrating radiation level in Heilongjiang Province are presented. 221 25 km x 25 km-grid measuring points were set uniformly up all over the province, with 555 densely measuring points of different types added. The results show that: (1)The area-weighted, population-weighted and point-weighted average value of natural γ radiation dose rate for field is 53.5, 58.5 and 54.2 nGy·h -1 , respectively; (2) The point-weighted average value of natural γ radiation dose rate for road is 58.4 nGy·h -1 ; (3) The population-weighted and point-weighted average value of natural γ radiation dose rate inside buildings is 85.2 and 78.9 nGy·h -1 , respectively; (4) The point-weighted and population-weighted average value of the dose rate inside buildings from cosmic ray is 28.6 and 28.1 nGy·h -1 , and outside buildings is 32.4 and 32.2 nGy·h -1 , respectively; (5) The point-weighted and population-weighted average value of natural penetrating radiation dose rate inside buildings is 109.7 and 112.8 nGy·h -1 , outside buildings is 84.8 and 91.0 nGy·h -1 , respectively; (6) The annual effective dose equivalent from cosmic ray, natural γ radiation and natural penetrating radiation is 0.26, 0.48 and 0.73 mSv, respectively; and correspondingly, the annual collective effective dose equivalent is 0.8 x 10 4 , 1.6 x 10 4 and 2.4 x 10 4 man·Sv, respectively

Investigation of environmental natural penetrating radiation level in Jiangsu province

International Nuclear Information System (INIS)

Liu Ming; Wang Chengbao.

1993-01-01

The methods and results of in investigation on natural penetrating radiation level in Jiangsu Province are presented. 182 25 km x 25 km-grid measuring points were set up uniformly all over the province, with 236 densely measuring points of different types added. The results show that: (1) The area-weighted, population-weighted and point-weighted average value of natural γ radiation dose rate for field is 50.3, 50.6 and 50.4 nGy · h -1 , respectively; (2) The point-weighted average value of natural γ radiation dose rate for road is 47.1 nGy · h -1 ; (3) The population-weighted and point-weighted average value of natural γ radiation dose rate inside buildings is 89.7 and 89.2 nGy · h -1 , respectively; (4) The point-weighted and population-weighted average value of the dose rate inside buildings from cosmic ray is 26.0 and 25.8 nGy · h -1 , and outside buildings is 29.2 and 29.1 nGy · h -1 , respectively; (5) The point-weighted and population-weighted average value of natural penetrating radiation dose rate inside buildings is 115.1 and 115.5 nGy · h -1 , outside buildings is 79.5 and 79.7 nGy · h -1 , respectively; (6) The annual effective dose equivalent from cosmic ray, natural γ radiation and natural penetrating radiation is 0.23, 0.48 and 0.71 mSv, respectively; and correspondingly, the annual collective effective dose equivalent is 3.0, 1.5 and 4.5 x 10 4 man · Sv, respectively

Investigation of environmental natural penetrating radiation level in Shaanxi Province

International Nuclear Information System (INIS)

Zhang Chunfang; Li Jiyin

1994-01-01

The methods and results of the investigation on natural penetrating radiation level in Shaanxi Province are presented. 359 25 km x 25 km-grid measuring points were set uniformly up all over the province, with 433 densely measuring points of different types added. The results show that: (1) The area-weighted, population-weighted and point-weighted average value of natural γ radiation dose rate for field is 62.0, 63.0 and 61.0 nGy·h -1 , respectively; (2) The point-weighted average value of natural γ radiation dose rate for road is 63.0 nGy · h -1 ; (3)The population-weighted and point-weighted average value of natural γ radiation dose rate inside buildings is 100.0 and 98.0 nGy·h -1 , respectively; (4)The point-weighted and population-weighted average value of the dose rate inside buildings from cosmic ray is 32.0 and 31.0 nGy·h -1 , and outside buildings is 37.0 and 36.0 nGy·h -1 , respectively; (5)The point-weighted and population-weighted average value of natural penetrating radiation dose rate inside buildings is 130.0 and 131.0 nGy·h -1 , outside buildings is 130.0 and 130.0 nGy·h -1 , respectively; (6)The annual effective dose equivalent from cosmic ray, natural γ radiation and natural penetrating radiation is 0.55, 0.28 and 0.83 mSv, respectively; and correspondingly, the annual collective effective dose equivalent is 1.63, 0.83 and 2.46 x 10 4 man·Sv, respectively

In-place HEPA filter penetration test

Energy Technology Data Exchange (ETDEWEB)

Bergman, W.; Wilson, K.; Elliott, J. [Lawrence Livermore National Lab., CA (United States)] [and others

1997-08-01

We have demonstrated the feasibility of conducting penetration tests on high efficiency particulate air (HEPA) filters as installed in nuclear ventilation systems. The in-place penetration test, which is designed to yield equivalent penetration measurements as the standard DOP efficiency test, is based on measuring the aerosol penetration of the filter installation as a function of particle size using a portable laser particle counter. This in-place penetration test is compared to the current in-place leak test using light scattering photometers for single HEPA filter installations and for HEPA filter plenums using the shroud method. Test results show the in-place penetration test is more sensitive than the in-place leak test, has a similar operating procedure, but takes longer to conduct. Additional tests are required to confirm that the in-place penetration test yields identical results as the standard dioctyl phthalate (DOP) penetration test for HEPA filters with controlled leaks in the filter and gasket and duct by-pass leaks. Further development of the procedure is also required to reduce the test time before the in-place penetration test is practical. 14 refs., 14 figs., 3 tabs.

Market penetration of ethanol

International Nuclear Information System (INIS)

Szulczyk, Kenneth R.; McCarl, Bruce A.; Cornforth, Gerald

2010-01-01

This research examines in detail the technology and economics of substituting ethanol for gasoline. This endeavor examines three issues. First, the benefits of ethanol/gasoline blends are examined, and then the technical problems of large-scale implementation of ethanol. Second, ethanol production possibilities are examined in detail from a variety of feedstocks and technologies. The feedstocks are the starch/sugar crops and crop residues, while the technologies are corn wet mill, dry grind, and lignocellulosic fermentation. Examining in detail the production possibilities allows the researchers to identity the extent of technological change, production costs, byproducts, and GHG emissions. Finally, a U.S. agricultural model, FASOMGHG, is updated which predicts the market penetration of ethanol given technological progress, variety of technologies and feedstocks, market interactions, energy prices, and GHG prices. FASOMGHG has several interesting results. First, gasoline prices have a small expansionary impact on the U.S. ethanol industry. Both agricultural producers' income and cost both increase with higher energy prices. If wholesale gasoline is $4 per gallon, the predicted ethanol market penetration attains 53% of U.S. gasoline consumption in 2030. Second, the corn wet mill remains an important industry for ethanol production, because this industry also produces corn oil, which could be converted to biodiesel. Third, GHG prices expand the ethanol industry. However, the GHG price expands the corn wet mill, but has an ambiguous impact on lignocellulosic ethanol. Feedstocks for lignocellulosic fermentation can also be burned with coal to generate electricity. Both industries are quite GHG efficient. Finally, U.S. government subsidies on biofuels have an expansionary impact on ethanol production, but may only increase market penetration by an additional 1% in 2030, which is approximately 6 billion gallons. (author)

[Professor WU Zhongchao's experience of penetration needling].

Science.gov (United States)

Zhang, Ning; Wang, Bing; Zhou, Yu

2016-08-12

Professor WU Zhongchao has unique application of penetration needling in clinical treatment. Professor WU applies penetration needling along meridians, and the methods of penetration needling include self-meridian penetration, exterior-interior meridian penetration, identical-name meridian penetration, different meridian penetration. The meridian differentiation is performed according to different TCM syndromes, locations and natures of diseases and acupoint nature, so as to make a comprehensive assessment. The qi movement during acupuncture is focused. In addition, attention is paid on anatomy and long-needle penetration; the sequence and direction of acupuncture is essential, and the reinforcing and reducing methods have great originality, presented with holding, waiting, pressing and vibrating. Based on classical acupoint, the acupoint of penetration needling is flexible, forming unique combination of acupoints.

Factors affecting flood insurance penetration in residential properties in Johor Malaysia

Science.gov (United States)

Godwin Aliagha, U.; Ewe Jin, T.; Weng Choong, W.; Nadzri Jaafar, M.

2014-04-01

High impact flood has virtually become an annual experience in Malaysia, yet flood insurance has remained a grossly neglected part of comprehensive integrated flood risk management. Using discriminant analysis, this study seeks to indentify the demand-side variables that best predict flood insurance penetration and risk aversion between two groups of residential homeowners in three districts of Johor State, Malaysia: those who purchased flood insurance and the group that did not. Our result revealed 34% penetration rate with Kota Tinggi district having the highest penetration (44%) and thus, the highest degree of flood risk aversion. The Wilks' Lambda F test for equality of group means, SCDFC, structure correlation and canonical correlation have clearly shown that there are strong significant attribute differences between the two groups of homeowners based on measures of objective flood risk exposure, subjective risk perception, and socio-economic cum demographic variables. However, measures of subjective risk perception were found more predictive of flood insurance penetration and flood risk aversion.

Combined use of nanocarriers and physical methods for percutaneous penetration enhancement.

Science.gov (United States)

Dragicevic, Nina; Maibach, Howard

2018-02-06

Dermal and transdermal drug delivery (due to its non-invasiveness, avoidance of the first-pass metabolism, controlling the rate of drug input over a prolonged time, etc.) have gained significant acceptance. Several methods are employed to overcome the permeability barrier of the skin, improving drug penetration into/through skin. Among chemical penetration enhancement methods, nanocarriers have been extensively studied. When applied alone, nanocarriers mostly deliver drugs to skin and can be used to treat skin diseases. To achieve effective transdermal drug delivery, nanocarriers should be applied with physical methods, as they act synergistically in enhancing drug penetration. This review describes combined use of frequently used nanocarriers (liposomes, novel elastic vesicles, lipid-based and polymer-based nanoparticles and dendrimers) with the most efficient physical methods (microneedles, iontophoresis, ultrasound and electroporation) and demonstrates superiority of the combined use of nanocarriers and physical methods in drug penetration enhancement compared to their single use. Copyright © 2018. Published by Elsevier B.V.

Ocular penetration and pharmacokinetics of topical gatifloxacin 0.3% and moxifloxacin 0.5% ophthalmic solutions after keratoplasty.

Science.gov (United States)

Holland, Edward J; Lane, Stephen S; Kim, Terry; Raizman, Michael; Dunn, Steven

2008-04-01

To compare the corneal and aqueous penetration and pharmacokinetics of gatifloxacin 0.3% and moxifloxacin 0.5% ophthalmic solutions and their effect on corneal reepithelialization after penetrating keratoplasty. In this randomized, open-label, parallel-controlled study, corneal and aqueous penetration and the pharmacokinetic parameters of topically applied gatifloxacin 0.3% and moxifloxacin 0.5% (2 preoperative doses of 1 drop given 5 minutes apart) were estimated by using a sparse sampling method. Corneal and aqueous samples were collected 0.25, 0.5, 1, or 2 hours after the final dose. The concentration was determined by a high-performance liquid chromatography method. Stromal Cmax:MBC50 (maximum drug concentration in serum to 50% minimum bactericidal concentration) ratios for selected ocular pathogens were also assessed. Postoperative corneal reepithelialization at days 1, 3, and 7 was evaluated and compared between groups. The calculated pharmacokinetic parameters were higher with moxifloxacin 0.5% than with gatifloxacin 0.3%. The stromal Cmax was 48.5 versus 15.7 microg/g (P = 0.04), and the stromal AUC0-2 (area under the concentration-time curve from 0 to 2 hours) was 30.9 versus 13.6 mug.h/g (P 0.05), and the endothelial AUC0-2 was 43.9 versus 9.8 microg.h/g (P 0.05), and the aqueous AUC0-2 was 1.2 versus 0.4 microg.h/mL (P < 0.05). Stromal Cmax:MBC50 ratios were higher in the moxifloxacin 0.5% group for each pathogen tested. The corneal reepithelialization rates were comparable between groups. Topical preoperative moxifloxacin 0.5% achieved greater corneal and aqueous penetration than did gatifloxacin 0.3%. The clinical significance of this difference is not known. Postoperative use of these agents had similar effects on corneal reepithelialization.

[Filtering facepieces: effect of oily aerosol load on penetration through the filtering material].

Science.gov (United States)

Plebani, Carmela; Listrani, S; Di Luigi, M

2010-01-01

Electrostatic filters are widely used in applications requiring high filtration efficiency and low pressure drop. However various studies showed that the penetration through electrostatic filters increases during exposure to an aerosol flow. This study investigates the effects of prolonged exposure to an oily aerosol on the penetration through filtering facepieces available on the market. Some samples of FFP1, FFP2 and FFP3 filtering facepieces were exposed for 8 hours consecutively to a paraffin oil polydisperse aerosol. At the end of the exposure about 830 mg of paraffin oil were deposited in the facepiece. All the examined facepieces showed penetration values that increased with paraffin oil load while pressure drop values were substantially the same before and after exposure. The measured maximum penetration values did not exceed the maximum penetration values allowed by the European technical standards, except in one case. According to the literature, 830 mg of oil load in a facepiece is not feasible in workplaces over an eight- hour shift. However, the trend of the penetration versus exposure mass suggests that if the load increases, the penetration may exceed the maximum allowed values. For comparison a mechanical filter was also studied. This showed an initial pressure drop higher than FFP2 filtering facepieces characterized by comparable penetration values. During exposure the pressure drop virtually doubled while penetration did not change. The increase in penetration with no increase in pressure drop in the analyzed facepieces indicates that it is necessary to comply with the information supplied by the manufacturer that restricts their use to a single shift.

Metasploit penetration testing cookbook

CERN Document Server

Agarwal, Monika

2013-01-01

This book follows a Cookbook style with recipes explaining the steps for penetration testing with WLAN, VOIP, and even cloud computing. There is plenty of code and commands used to make your learning curve easy and quick.This book targets both professional penetration testers as well as new users of Metasploit, who wish to gain expertise over the framework and learn an additional skill of penetration testing, not limited to a particular OS. The book requires basic knowledge of scanning, exploitation, and the Ruby language.

Penetrating chest wound of the foetus

Directory of Open Access Journals (Sweden)

Albert Wandaogo

2016-01-01

Full Text Available Traumas of the foetus caused by stabbings are rare but actually life-threatening for both the foetus and the mother. We report a case of penetrating chest wound on a baby taken from the obstetrics unit to the paediatric surgical department. His mother was assaulted by his father, a mentally sick person with no appropriate follow-up. The foetus did not show any sign of vital distress. Surgical exploration of the wound has revealed a section of the 10 th rib, a laceration of the pleura and a tearing of the diaphragm. A phrenorraphy and a pleural drainage were performed. The new-born and its mother were released from hospital after 5 days and the clinical control and X-ray checks 6 months later showed nothing abnormal. We insisted a medical, psychiatric follow-up be initiated for the father. As regards pregnant women with penetrating wounds, the mortality rate of the foetus is 80%. The odds are good for our newborn due to the mild injuries and good professional collaboration of the medical staff. Penetrating transuterine wounds of the foetus can be very serious. The health care needed should include many fields due to the mother and the foetus′ lesions extreme polymorphism. In our case, it could have prevented by a good psychiatric followed up of the offender.

Modeling of Oblique Penetration into Geologic Targets Using Cavity Expansion Penetrator Loading with Target free-Surface Effects

Energy Technology Data Exchange (ETDEWEB)

Jung, Joe; Longcope, Donald B.; Tabbara, Mazen R.

1999-05-03

A procedure has been developed to represent the loading on a penetrator and its motion during oblique penetration into geologic media. The penetrator is modeled with the explicit dynamics, finite element computer program PRONTO 3D and the coupled pressure on the penetrator is given in a new loading option based on a separate cavity expansion (CE) solution that accounts for the pressure-reduction from a nearby target free surface. The free-surface influ- ence distance is selected in a predictive manner by considering the pressure to expand a spherical cavity in a finite radius sphere of the target material. The CE/PRONTO 3D procedure allows a detailed description of the penetrator for predicting shock environments or structural failure dur- ing the entire penetration event and is sufficiently rapid to be used in design optimization. It has been evaluated by comparing its results with data from two field tests of a full-scale penetrator into frozen soil at an impact angles of 49.6 and 52.5 degrees from the horizontal. The measured penetrator rotations were 24 and 22 degrees, respectively. In the simulation, the rotation was21 degrees and predominately resulted from the pressure reduction of the free surface. Good agree- ment was also found for the penetration depth and axial and lateral acceleration at two locations in the penetrator.

A Mass Loss Penetration Model to Investigate the Dynamic Response of a Projectile Penetrating Concrete considering Mass Abrasion

Directory of Open Access Journals (Sweden)

NianSong Zhang

2015-01-01

Full Text Available A study on the dynamic response of a projectile penetrating concrete is conducted. The evolutional process of projectile mass loss and the effect of mass loss on penetration resistance are investigated using theoretical methods. A projectile penetration model considering projectile mass loss is established in three stages, namely, cratering phase, mass loss penetration phase, and remainder rigid projectile penetration phase.

Effect of lavage and brush preparation on cement penetration and primary stability in tibial unicompartmental total knee arthroplasty: An experimental cadaver study.

Science.gov (United States)

Scheele, Christian; Pietschmann, Matthias F; Schröder, Christian; Grupp, Thomas; Holderied, Melanie; Jansson, Volmar; Müller, Peter E

2017-03-01

Unicompartmental total knee arthroplasty (UKA) is a well-established treatment option for unicondylar osteoarthritis, and generally leads to better functional results than tricompartimental total knee arthroplasty (TKA). However, revision rates of UKAs are reported as being higher; a major reason for this is aseptic loosening of the tibial component due to implant-cement-bone interface fatigue. The objective of this study was to determine the effects of trabecular bone preparation, prior to implantation of tibial UKAs, on morphological and biomechanical outcomes in a cadaver study. Cemented UKAs were performed in 18 human cadaver knees after the bone bed was cleaned using pulsed lavage (Group A), conventional brush (Group B) or no cleaning at all (Group C, control). Morphologic cement penetration and primary stability were measured. The area proportion under the tibial component without visible cement penetration was significantly higher in Group C (21.9%, SD 11.9) than in both Group A (7.1%, SD 5.8), and Group B (6.5%, SD 4.2) (P=0.007). The overall cement penetration depth did not differ between groups. However, in the posterior part, cement penetration depth was significantly higher in Group B (1.9mm, SD 0.3) than in both Group A (1.3mm, SD 0.3) and Group C (1.4mm, SD 0.3) (P=0.015). The mode of preparation did not show a substantial effect on primary stability tested under dynamic compression-shear test conditions (P=0.910). Bone preparation significantly enhances cement interdigitation. The application of a brush shows similar results compared with the application of pulsed lavage. Copyright © 2016 Elsevier B.V. All rights reserved.

Projectile Nose Mass Abrasion of High-Speed Penetration into Concrete

Directory of Open Access Journals (Sweden)

Haijun Wu

2012-01-01

Full Text Available Based on the dynamic spherical cavity expansion theory of concrete and the analysis of experimental data, a mass abrasion model of projectile considering the hardness of aggregates, the relative strength of target and projectile, and the initial impact velocity is constructed in this paper. Furthermore, the effect of mass abrasion on the penetration depth of projectile and the influence of hardness of aggregates and strength of projectile on penetration depth and mass loss are also analyzed. The results show that, for the ogive-nose projectile with the CRH of 3 and aspect ratio of 7 penetrating the concrete of 35 MPa, the “rigid-body penetration” model is available when the initial impact velocity is lower than 800 m/s. However, when the initial impact velocity is higher than 800 m/s, the “deforming/eroding body penetration” model should be adopted. Through theoretical analysis and numerical calculation, the results indicate that the initial impact velocity is the most important factor of mass abrasion. The hardness of aggregates and the strength of projectile are also significant factors. But relatively speaking, the sensitivity of strength of projectile to mass abrasion is higher, which indicates that the effect of projectile material on mass abrasion is more dramatic than the hardness of aggregates.

Improving Outcomes Following Penetrating Colon Wounds

Science.gov (United States)

Miller, Preston R.; Fabian, Timothy C.; Croce, Martin A.; Magnotti, Louis J.; Elizabeth Pritchard, F.; Minard, Gayle; Stewart, Ronald M.

2002-01-01

Introduction During World War II, failure to treat penetrating colon injuries with diversion could result in court martial. Based on this wartime experience, colostomy for civilian colon wounds became the standard of care for the next 4 decades. Previous work from our institution demonstrated that primary repair was the optimal management for nondestructive colon wounds. Optimal management of destructive wounds requiring resection remains controversial. To address this issue, we performed a study that demonstrated risk factors (pre or intraoperative transfusion requirement of more than 6 units of packed red blood cells, significant comorbid diseases) that were associated with a suture line failure rate of 14%, and of whom 33% died. Based on these outcomes, a clinical pathway for management of destructive colon wounds was developed. The results of the implementation of this pathway are the focus of this report. Methods Patients with penetrating colon injury were identified from the registry of a level I trauma center over a 5-year period. Records were reviewed for demographics, injury characteristics, and outcome. Patients with nondestructive injuries underwent primary repair. Patients with destructive wounds but no comorbidities or large transfusion requirement underwent resection and anastomosis, while patients with destructive wounds and significant medical illness or transfusion requirements of more than 6 units/blood received end colostomy. The current patients (CP) were compared to the previous study (PS) to determine the impact of the clinical pathway. Outcomes examined included colon related mortality and morbidity (suture line leak and abscess). Results Over a 5.5-year period, 231 patients had penetrating colon wounds. 209 survived more 24 hours and comprise the study population. Primary repair was performed on 153 (73%) patients, and 56 patients had destructive injuries (27%). Of these, 40 (71%) had resection and anastomosis and 16 (29%) had diversion

Rheological, mechanical and membrane penetration properties of novel dual drug systems for percutaneous delivery.

Science.gov (United States)

Woolfson, A D; Malcolm, R K; Campbell, K; Jones, D S; Russell, J A

2000-07-03

In this study it has been demonstrated that mixtures of two solid drugs, ibuprofen and methyl nicotinate, with different but complementary pharmacological activities and which exist as a single liquid phase over a wide composition range at skin temperature, can be formulated as o/w emulsions without the use of an additional hydrophobic carrier. These novel dual drug systems provided significantly enhanced in vitro penetration rates through a model lipophilic barrier membrane compared to conventional individual formulations of each active. Thus, for ibuprofen, drug penetration flux enhancements of three- and 10-fold were observed when compared to an aqueous ibuprofen suspension and a commercial alcohol-based ibuprofen formulation, respectively. Methyl nicotinate penetration rates were shown to be similar for aqueous gels and emulsified systems. Mechanisms explaining these observations are proposed. Novel dual drug formulations of ibuprofen and methyl nicotinate, formulated within the liquid range at skin temperature, were investigated by oscillatory rheology and texture profile analysis, demonstrating the effects of drug and viscosity enhancer concentrations, and disperse phase type upon the rheological, mechanical and drug penetration properties of these systems.

FAA Fluorescent Penetrant Activities - An Update

Energy Technology Data Exchange (ETDEWEB)

Moore, D.G.

1998-10-20

The Federal Aviation Administration's Airworthiness Assurance NDI Validation Center (AANC) is currently characterizing low cycle fatigue specimens that will support the needs of penetrant manufacturers, commercial airline industry and the Federal Aviation Administration. The main focus of this characterization is to maintain and enhance the evaluation of penetrant inspection materials and apply resources to support the aircraft community needs. This paper discusses efforts to-date to document the Wright Laboratory penetrant evaluation process and characterize penetrant brightness readings in the initial set of sample calibration panels using Type 1 penetrant.

Partial liquid-penetration inside a deep trench by film flowing over it

Science.gov (United States)

Nguyen, Phuc-Khanh; Dimakopoulos, Yiannis; Tsamopoulos, John

2014-11-01

Liquid film flow along substrates featuring a deep trench may not wet the trench floor, but create a second gas-liquid interface inside the trench. The liquid penetration inside the trench depends on the location and shape of this inner interface. The penetration increases by decreasing the two three-phase contact lines between the inner interface and the two side-walls or the flow rate and depends on the liquid properties. This partial-penetration is studied by employing the Galerkin / finite element method to solve the two-dimensional steady-state Navier-Stokes equations in a physical domain that is adaptively remeshed. Multiple branches of steady solutions connected via turning points are revealed by pseudo arc-length continuation. Flow hysteresis may occur in a certain range of liquid penetration depth, when the interaction of the two interfaces changes qualitatively. This induces an abrupt jump of penetration distance and deformation amplitude of the outer interface. Work supported by the General Secretariat of Research & Technology of Greece through the program ``Excellence'' (Grant No. 1918) in the framework ``Education and Lifelong Learning'' co-funded by the ESF.

Penetration Tester's Open Source Toolkit

CERN Document Server

Faircloth, Jeremy

2011-01-01

Great commercial penetration testing tools can be very expensive and sometimes hard to use or of questionable accuracy. This book helps solve both of these problems. The open source, no-cost penetration testing tools presented do a great job and can be modified by the user for each situation. Many tools, even ones that cost thousands of dollars, do not come with any type of instruction on how and in which situations the penetration tester can best use them. Penetration Tester's Open Source Toolkit, Third Edition, expands upon existing instructions so that a professional can get the most accura

Penetration through the Skin Barrier

DEFF Research Database (Denmark)

Nielsen, Jesper Bo; Benfeldt, Eva; Holmgaard, Rikke

2016-01-01

The skin is a strong and flexible organ with barrier properties essential for maintaining homeostasis and thereby human life. Characterizing this barrier is the ability to prevent some chemicals from crossing the barrier while allowing others, including medicinal products, to pass at varying rates......-through diffusion cells) as well as in vivo methods (microdialysis and microperfusion). Then follows a discussion with examples of how different characteristics of the skin (age, site and integrity) and of the penetrants (size, solubility, ionization, logPow and vehicles) affect the kinetics of percutaneous...

Rates of in vivo (arterial) and in vitro biocorrosion for pure magnesium.

Science.gov (United States)

Bowen, Patrick K; Drelich, Adam; Drelich, Jaroslaw; Goldman, Jeremy

2015-01-01

The development of magnesium-based materials for bioabsorbable stents relies heavily on corrosion testing by immersion in pseudophysiological solutions, where magnesium degrades faster than it does in vivo. The quantitative difference in corrosion kinetics in vitro and in vivo is largely unknown, but, if determined, would help reduce dependence on animal models. In order to create a quantitative in vitro-in vivo correlation based on an accepted measure of corrosion (penetration rate), commercially pure magnesium wires were corroded in vivo in the abdominal aortas of rats for 5-32 days, and in vitro for up to 14 days using Dulbecco's modified eagle medium. Cross-sectioning, scanning electron microscopy, image analysis, a modified penetration rate tailored to degraded wires, and empirical modeling were used to analyze the corroded specimens. In vitro penetration rates were consistently higher than comparable in vivo rates by a factor of 1.2-1.9× (±0.2×). For a sample <20% corroded, an approximate in vitro-in vivo multiplier of 1.3 ± 0.2× was applied, whereas a multiplier of 1.8 ± 0.2× became appropriate when the magnesium specimen was 25-35% degraded. © 2014 Wiley Periodicals, Inc.

In vivo and in vitro dermal penetration of 2,4,5,2',4', 5'-hexachlorobiphenyl in young and adult rats

International Nuclear Information System (INIS)

Shah, P.V.; Sumler, M.R.; Fisher, H.L.; Hall, L.L.

1989-01-01

Penetration of 2,4,5,2',4',5'-[ 14 C]hexachlorobiphenyl (HCB) through skin of young (33 days) and adult (82 days) female Fischer 344 rats was determined in vivo and by two in vitro methods. In vivo dermal penetration at 120 hr was 45% in young and 43% in adults. At 72 hr in vivo dermal penetration was 35% in young and 26% in adults compared to 1.5% for young and 1.0% for adult as measured with a continuous flow in vitro system and 2.9% for young and 1.9% for adults as measured with a static in vitro system. Most of the dermally absorbed HCB remained in the body as only 4.9 and 2.6% of that absorbed was excreted by young and adult rats, respectively, at the end of 120 hr. Significant differences in dermal penetration and kinetics of HCB between young and adult female rats were observed. The elimination of ECB-derived material was approximately six times higher in feces than in urine. A physiological pharmacokinetic model was fitted to the organ and tissue radioactivity distribution data. Parameters in the model determined from dermal dosing of female Fischer 344 rats were in reasonable agreement with those reported in the literature for adult male Sprague-Dawley rats (iv dose). The rate constant for dermal penetration was 0.83 x 10 -4 min -1 for adults and 0.96 x 10 -4 min -1 for young. The delay or lag time parameter for dermal penetration was 4.4 hr in adults and 1.1 hr in young

Achieving penetration and participation in Diabetes After Pregnancy prevention interventions following gestational diabetes

DEFF Research Database (Denmark)

Dasgupta, Kaberi; Terkildsen Maindal, Helle; Kragelund Nielsen, Karoline

2018-01-01

and/or telephone contact CONCLUSIONS: Although penetration and participation reporting is sub-optimal, penetration generally is high while participation is variable. Leveraging and structuring recruitment within standard GDM care and settings appears to be important to engage women in DAP prevention...... (enrolled/invited) rates were calculated after data extraction. RESULTS: Among 2,859 records, 33 intervention studies were identified, among which 16 had sufficient information to calculate penetration or participation. Penetration proportion (n=9 studies) was between 85-100% for two-thirds of studies...... included. Participation proportion (n=16 studies) varied substantially; when recruitment occurred during pregnancy or early postpartum participation was 40% or more, especially if face-to-face contact was used within the GDM care setting, compared to under 15% in mid/late postpartum with mailed invitation...

Web penetration testing with Kali Linux

CERN Document Server

Muniz, Joseph

2013-01-01

Web Penetration Testing with Kali Linux contains various penetration testing methods using BackTrack that will be used by the reader. It contains clear step-by-step instructions with lot of screenshots. It is written in an easy to understand language which will further simplify the understanding for the user.""Web Penetration Testing with Kali Linux"" is ideal for anyone who is interested in learning how to become a penetration tester. It will also help the users who are new to Kali Linux and want to learn the features and differences in Kali versus Backtrack, and seasoned penetration testers

Selective Nonoperative Management of Penetrating Abdominal Solid Organ Injuries

Science.gov (United States)

Demetriades, Demetrios; Hadjizacharia, Pantelis; Constantinou, Costas; Brown, Carlos; Inaba, Kenji; Rhee, Peter; Salim, Ali

2006-01-01

.0%), including 18 cases with grade III to V injuries, were successfully managed without a laparotomy and without any abdominal complication. Overall, 28.4% of all liver, 14.9% of kidney, and 3.5% of splenic injuries were successfully managed nonoperatively. Patients with isolated solid organ injuries treated nonoperatively had a significantly shorter hospital stay than patients treated operatively, even though the former group had more severe injuries. In 3 patients with failed nonoperative management and delayed laparotomy, there were no complications. Conclusions: In the appropriate environment, selective nonoperative management of penetrating abdominal solid organ injuries has a high success rate and a low complication rate. PMID:16998371

Associations Between Penetration Cognitions, Genital Pain, and Sexual Well-being in Women with Provoked Vestibulodynia.

Science.gov (United States)

Anderson, Alexandra B; Rosen, Natalie O; Price, Lisa; Bergeron, Sophie

2016-03-01

Provoked vestibulodynia (PVD) is a common vulvovaginal pain condition that negatively impacts women's psychological and sexual well-being. Controlled studies have found that women with PVD report greater negative and less positive cognitions about penetration; however, associations between these types of cognitions and women's pain and sexual well-being remain unknown. Further, researchers have yet to examine how interpersonal variables such as sexual communication may impact the association between women's penetration cognitions and PVD outcomes. We examined associations between vaginal penetration cognitions and sexual satisfaction, sexual function, and pain in women with PVD, as well as the moderating role of sexual communication. Seventy-seven women (M age = 28.32, SD = 6.19) diagnosed with PVD completed the catastrophic and pain cognitions and positive cognitions subscales of the Vaginal Penetration Cognition Questionnaire, as well as the Dyadic Sexual Communication Scale. Participants also completed measures of sexual satisfaction, sexual function, and pain. Dependent measures were the (i) Global Measure of Sexual Satisfaction Scale; (ii) Female Sexual Function Index; and (iii) Present Pain Intensity scale of the McGill Pain Questionnaire, with reference to pain during vaginal intercourse. Women's lower catastrophic and pain cognitions, higher positive cognitions, and higher sexual communication were each uniquely associated with higher sexual satisfaction and sexual function. Lower catastrophic and pain cognitions also were associated with women's lower pain. For women who reported higher sexual communication, as positive cognitions increased, there was a significantly greater decrease in pain intensity during intercourse compared to women who reported lower levels of sexual communication. Findings may inform cognitive-behavioral interventions aimed at improving the pain and sexual well-being of women with PVD. Targeting the couple's sexual communication

Effect of snow cover on soil frost penetration

Science.gov (United States)

Rožnovský, Jaroslav; Brzezina, Jáchym

2017-12-01

Snow cover occurrence affects wintering and lives of organisms because it has a significant effect on soil frost penetration. An analysis of the dependence of soil frost penetration and snow depth between November and March was performed using data from 12 automated climatological stations located in Southern Moravia, with a minimum period of measurement of 5 years since 2001, which belong to the Czech Hydrometeorological institute. The soil temperatures at 5 cm depth fluctuate much less in the presence of snow cover. In contrast, the effect of snow cover on the air temperature at 2 m height is only very small. During clear sky conditions and no snow cover, soil can warm up substantially and the soil temperature range can be even higher than the range of air temperature at 2 m height. The actual height of snow is also important - increased snow depth means lower soil temperature range. However, even just 1 cm snow depth substantially lowers the soil temperature range and it can therefore be clearly seen that snow acts as an insulator and has a major effect on soil frost penetration and soil temperature range.

Penetration of Photovoltaics in Greece

Directory of Open Access Journals (Sweden)

Eugenia Giannini

2015-06-01

Full Text Available Recently, an interesting experiment was completed in Greece concerning photovoltaic penetration into the electricity production sector. Based on the relevant laws and in accordance to the related European directives, an explosive penetration process was completed in less than three years, resulting in a 7% share of photovoltaics in electricity production instead of the previous negligible share. The legislation was based on licensing simplification and generous feed-in-tariffs. This approach transformed photovoltaic technology from a prohibitively expensive to a competitive one. This work aims to summarize the relevant legislation and illustrate its effect on the resulting penetration. A sigmoid-shape penetration was observed which was explained by a pulse-type driving force. The return on investment indicator was proposed as an appropriate driving force, which incorporates feed-in-tariffs and turnkey-cost. Furthermore, the resulting surcharge on the electricity price due to photovoltaic penetration was also analyzed.

Development of a crack growth analysis is program for reactor head penetration

Energy Technology Data Exchange (ETDEWEB)

Hong, Sung Yull; Choi, Kwang Hee; Park, Jeong Il [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Kang, Young Hwan; Park, Sung Ho; Kim, Il; Kim, Young Jong; Yoo, Young Joon; Yoo, Wan; Maeng, Wan Young; Choi, Suk Nam; Kim, Kee Suk; Yoon, Sung Won; Kim, Jee Ho; Park, Myung Kyu [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-12-31

Crack growth analysis program for Reactor Head Penetration is being developed for applying to plants such as, Kori 1, Kori 2, Kori 3,4 YoungKwang 1,2 and Uljin 1,2 (1) Stress Evaluation - The stress analysis is required to evaluate the structure integrity for the RVH penetration tubes. The RVH penetration tubes are geometrically non-symmetry except center one. Thus, 3D finite element analysis should be employed for the stress analysis. The magnitude and distribution of residual stress resulted from welding can be determined analytically by simulation welding procedure. (2) Flaw Evaluation - There are two objectives of the penetration tube flaw evaluation to predict the time required for a crack to propagate to the acceptance criteria. The first objective is to perform the parametric evaluation for a postulated crack. The second objective is to develop the flaw evaluation program for the crack detected during the inspection. (3) Characterization of Material Properties of Alloy 600 - These study is to provide data which similarly represent the properties of PWR power plants in Korea. The data is used for analyzing of the stress distribution around penetration tubes. And the PWSCC data will be used for the crack growth rate of the penetration tubes. (author). 92 refs., 121 figs.

Follicular and percutaneous penetration pathways of topically applied minoxidil foam.

Science.gov (United States)

Blume-Peytavi, Ulrike; Massoudy, Lida; Patzelt, Alexa; Lademann, Jürgen; Dietz, Ekkehart; Rasulev, Utkur; Garcia Bartels, Natalie

2010-11-01

In the past, it was assumed that the intercellular route was the only relevant penetration pathway for topically applied substances. Recent results on follicular penetration emphasize that the hair follicles represent a highly relevant and efficient penetration pathway and reservoir for topically applied substances. This study investigates a selective closure technique of hair follicle orifices in vivo assessing interfollicular and follicular absorption rates of topical minoxidil foam in humans. In delimited skin area, single hair orifices or interfollicular skin were blocked with a microdrop of special varnish-wax-mixture in vivo. Minoxidil foam (5%) was topically applied, and transcutaneous absorption was measured by a new surface ionization mass spectrometry technique in serum. Different settings (open, closed or none of both) enabled to clearly distinguish between interfollicular and follicular penetration of the topically applied minoxidil foam. Five minutes after topical application, minoxidil was detected in blood samples when follicles remained open, whereas with closed follicles 30 min were needed. Highest levels were found first when both pathways were open, followed by open follicles and subsequently by closed follicles. These results demonstrate the high importance of the follicular penetration pathway. Hair follicles are surrounded by a dense network of blood capillaries and dendritic cells and have stem cells in their immediate vicinity, making them ideal targets for drug delivery. Copyright © 2010 Elsevier B.V. All rights reserved.

Modeling of Oblique Penetration into Geologic Targets Using Cavity Expansion Penetrator Loading with Target free-Surface Effects

Energy Technology Data Exchange (ETDEWEB)

Jung, Joe; Longcope, Donald B.; Tabbara, Mazen R.

1999-06-01

A procedure has been developed to represent the loading on a penetrator and its motion during oblique penetration into geologic media. The penetrator is modeled with the explicit dynamics, finite element computer program PRONTO 3D and the coupled pressure on the penetrator is given in a new loading option based on a separate cavity expansion (CE) solution that accounts for the pressure reduction from a nearby target free surface. The free-surface influence distance is selected in a predictive manner by considering the pressure to expand a spherical cavity in a finite radius sphere of the target material. The CE/PRONTO 3D procedure allows a detailed description of the penetrator for predicting shock environments or structural failure during the entire penetra- tion event and is sufficiently rapid to be used in design optimization. It has been evaluated by comparing its results with data from two field tests of a full-scale penetrator into frozen soil at an impact angles of 49.6 and 52.5 degrees from the horizontal. The measured penetrator rotations were 24 and 22 degrees, respectively. In the simulation, the rotation was 21 degrees and predom- inately resulted from the pressure reduction of the free surface. Good agreement was also found for the penetration depth and axial and lateral acceleration at two locations in the penetrator.

NRC Information No. 88-04: Inadequate qualification and documentation of fire barrier penetration seals

International Nuclear Information System (INIS)

Rossi, C.E.

1992-01-01

The current NRC review was prompted by reports, inspection findings, allegations, and other information that indicated the possibility that NRC requirements for fire barrier penetration seals were not being met in all aspects. The review included: evaluations of fire barrier penetration seal specifications and procedures developed by licensees, licensee agents, and licensee contractors; evaluations of various fire barrier penetration seal tests and test data; and inspections of various fire barrier penetrations seal designs and installations. The types of concerns identified to date and mentioned below are related to weaknesses in the implementation of NRC requirements and guidelines as related to fire barrier penetration seal design qualification. The NRC review also has identified a current practice that can affect the qualification status of installed seals. Plant modifications are being made that require running new cable and conduits through existing penetration seals. These modifications are generally being made without an associated technical review to ensure that the resulting penetration seal design configuration or design parameters are consistent with those validated by initial qualification tests. Over a period of time, numerous minor modifications to the same area could cumulatively result in a degraded fire barrier rating

Application of a Microstructure-Based ISV Plasticity Damage Model to Study Penetration Mechanics of Metals and Validation through Penetration Study of Aluminum

Directory of Open Access Journals (Sweden)

Yangqing Dou

2017-01-01

Full Text Available A developed microstructure-based internal state variable (ISV plasticity damage model is for the first time used for simulating penetration mechanics of aluminum to find out its penetration properties. The ISV damage model tries to explain the interplay between physics at different length scales that governs the failure and damage mechanisms of materials by linking the macroscopic failure and damage behavior of the materials with their micromechanical performance, such as void nucleation, growth, and coalescence. Within the continuum modeling framework, microstructural features of materials are represented using a set of ISVs, and rate equations are employed to depict damage history and evolution of the materials. For experimental calibration of this damage model, compression, tension, and torsion straining conditions are considered to distinguish damage evolutions under different stress states. To demonstrate the reliability of the presented ISV model, that model is applied for studying penetration mechanics of aluminum and the numerical results are validated by comparing with simulation results yielded from the Johnson-Cook model as well as analytical results calculated from an existing theoretical model.

Barrier penetration database

International Nuclear Information System (INIS)

Fainberg, A.; Bieber, A.M. Jr.

1978-11-01

This document is intended to supply the NRC and nuclear power plant licensees with basic data on the times required to penetrate forcibly the types of barriers commonly found in nuclear plants. These times are necessary for design and evaluation of the physical protection system required under 10CFR73.55. Each barrier listed is described in detail. Minor variations in basic barrier construction that result in the same penetration time, are also described

Higher rates of sex evolve in spatially heterogeneous environments.

Science.gov (United States)

Becks, Lutz; Agrawal, Aneil F

2010-11-04

The evolution and maintenance of sexual reproduction has puzzled biologists for decades. Although this field is rich in hypotheses, experimental evidence is scarce. Some important experiments have demonstrated differences in evolutionary rates between sexual and asexual populations; other experiments have documented evolutionary changes in phenomena related to genetic mixing, such as recombination and selfing. However, direct experiments of the evolution of sex within populations are extremely rare (but see ref. 12). Here we use the rotifer, Brachionus calyciflorus, which is capable of both sexual and asexual reproduction, to test recent theory predicting that there is more opportunity for sex to evolve in spatially heterogeneous environments. Replicated experimental populations of rotifers were maintained in homogeneous environments, composed of either high- or low-quality food habitats, or in heterogeneous environments that consisted of a mix of the two habitats. For populations maintained in either type of homogeneous environment, the rate of sex evolves rapidly towards zero. In contrast, higher rates of sex evolve in populations experiencing spatially heterogeneous environments. The data indicate that the higher level of sex observed under heterogeneity is not due to sex being less costly or selection against sex being less efficient; rather sex is sufficiently advantageous in heterogeneous environments to overwhelm its inherent costs. Counter to some alternative theories for the evolution of sex, there is no evidence that genetic drift plays any part in the evolution of sex in these populations.

Penetration enhancer-containing vesicles (PEVs) as carriers for cutaneous delivery of minoxidil.

Science.gov (United States)

Mura, Simona; Manconi, Maria; Sinico, Chiara; Valenti, Donatella; Fadda, Anna Maria

2009-10-01

The aim of this work was to evaluate the ability of a few different penetration enhancers to produce elastic vesicles with soy lecithin and the influence of the obtained vesicles on in vitro (trans)dermal delivery of minoxidil. To this purpose, so-called Penetration Enhancer-containing Vesicles (PEVs) were prepared as dehydrated-rehydrated vesicles by using soy lecithin and different amounts of three penetration enhancers, 2-(2-ethoxyethoxy)ethanol (Transcutol), capryl-caproyl macrogol 8-glyceride (Labrasol), and cineole. Soy lecithin liposomes, without penetration enhancers, were used as control. Prepared formulations were characterized in terms of size distribution, morphology, zeta potential, and vesicle deformability. The influence of PEVs on (trans)dermal delivery of minoxidil was studied by in vitro diffusion experiments through newborn pig skin in comparison with traditional liposomes and ethanolic solutions of the drug also containing each penetration enhancer. A skin pre-treatment study using empty PEVs and conventional liposomes was also carried out. Results showed that all the used penetration enhancers were able to give more deformable vesicles than conventional liposomes with a good drug entrapment efficiency and stability. In vitro skin penetration data showed that PEVs were able to give a statistically significant improvement of minoxidil deposition in the skin in comparison with classic liposomes and penetration enhancer-containing drug ethanolic solutions without any transdermal delivery. Moreover, the most deformable PEVs, prepared with Labrasol and cineole, were also able to deliver to the skin a higher total amount of minoxidil than the PE alcoholic solutions thus suggesting that minoxidil delivery to the skin was strictly correlated to vesicle deformability, and therefore to vesicle composition.

The Effect of Human-Immunodeficiency Virus Status on Outcomes in Penetrating Abdominal Trauma: An Interim Analysis.

Science.gov (United States)

McPherson, Deidre; Neuhaus, Valentin; Dhar, Rohin; Edu, Sorin; Nicol, Andrew J; Navsaria, Pradeep H

2018-01-31

The purpose of this study was to determine whether the outcomes of hemodynamically stable patients undergoing exploratory laparotomy for penetrating abdominal trauma differed as a result of their HIV status. This was an observational, prospective study from February 2016 to May 2017. All hemodynamically stable patients with penetrating abdominal trauma requiring a laparotomy were included. The mechanism of injury, the HIV status, age, the penetrating abdominal trauma index (PATI), and the revised trauma score (RTS) were entered into a binary logistic regression model. Outcome parameters were in-hospital death, morbidity, admission to intensive care unit (ICU), relaparotomy within 30 days, and length of stay longer than 30 days. A total of 209 patients, 94% male, with a mean age of 29 ± 10 years were analysed. Twenty-eight patients (13%) were HIV positive. The two groups were comparable. Ten (4.8%) laparotomies were negative. There were two (0.96%) deaths, both in the HIV negative group. The complication rate was 34% (n = 72). Twenty-nine patients (14%) were admitted to the ICU. A higher PATI, older age, and a lower RTS were significant risk factors for ICU admission. After 30 days, 12 patients (5.7%) were still in hospital. Twenty-four patients (11%) underwent a second laparotomy. The PATI score was the single independent predictor for complications, relaparotomy, and hospital stay longer than 30 days. Preliminary results reveal that HIV status does not influence outcomes in patients with penetrating abdominal trauma.

Carbon mineralization and oxygen dynamics in sediments with deep oxygen penetration, Lake Superior

DEFF Research Database (Denmark)

Li, Jiying; Crowe, Sean Andrew; Miklesh, David

2012-01-01

To understand carbon and oxygen dynamics in sediments with deep oxygen penetration, we investigated eight locations (160–318-m depth) throughout Lake Superior. Despite the 2–4 weight percent organic carbon content, oxygen penetrated into the sediment by 3.5 to > 12 cm at all locations. Such deep ...... volume-specific carbon degradation rates were 0.3–1.5 µmol cm−3 d−1; bioturbation coefficient near the sediment surface was 3–8 cm2 yr−1. These results indicate that carbon cycling in large freshwater systems conforms to many of the same trends as in marine systems.......To understand carbon and oxygen dynamics in sediments with deep oxygen penetration, we investigated eight locations (160–318-m depth) throughout Lake Superior. Despite the 2–4 weight percent organic carbon content, oxygen penetrated into the sediment by 3.5 to > 12 cm at all locations. Such deep......, suggesting that temporal variability in deeply oxygenated sediments may be greater than previously acknowledged. The oxygen uptake rates (4.4–7.7 mmol m−2 d−1, average 6.1 mmol m−2 d−1) and carbon mineralization efficiency (∼ 90% of deposited carbon) were similar to those in marine hemipelagic and pelagic...

Diffusion of radioactively tagged penetrants through rubbery polymers. II. Dependence on molecular length of penetrant

International Nuclear Information System (INIS)

Rhee, C.K.; Ferry, J.D.; Fetters, L.J.

1977-01-01

The diffusion of radioactively tagged n-hexadecane, n-dotriacontane, and a polybutadiene oligomer with molecular weight 1600 has been studied in 12 rubbery polymers. Diffusion coefficients were obtained from the theory for the thin smear method: for n-hexadecane and for n-dotriacontane (with one exception), in the form appropriate for a completely miscible polymer-penetrant pair, and for the oligomer in the form appropriate for slow entry of the pentrant across the penetrant-polymer interface. For the four flexible linear penetrants, n-dodecane, n-hexadecane, n-dotriacontane, and oligomer, the ratios of diffusion coefficients (or translational friction coefficients) are nearly the same in every polymer. It is concluded that these penetrants travel with similar segmentwise motions, although that is not the case with bulkier, more rigid penetrants. For the three normal paraffins, the friction coefficient is approximately proportional to molecular weight, but that for the oligomer is smaller than would be predicted on this basis

Thermal-Hydraulic Integral Effect Test with the ATLS for Investigation on CEDM Penetration Nozzle Integrity

Energy Technology Data Exchange (ETDEWEB)

Kang, Kyoungho; Seokcho; Park, Hyunsik; Choi, Namhyun; Park, Yusun; Kim, Jongrok; Bae, Byounguhn; Kim, Yeonsik; Choi, Kiyong; Song, Chulhwa [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-05-15

In this study, thermal-hydraulic integral effect test with the ATLAS (Advanced Thermal-Hydraulic Test Loop for Accident Simulation) was performed for simulating a failure of CEDM penetration nozzle. The main objectives of the present test were not only to provide physical insight into the system response during a failure of CEDM penetration nozzle but also to establish an integral effect test database for the validation of the safety analysis codes. Furthermore, present experimental data were utilized to resolve the safety issue raised by the PWSCC at the CEDM penetration nozzle of the YGN-3. Thermal-hydraulic integral effect test with the ATLAS was performed for simulating a failure of CEDM penetration nozzle. Failure of two penetration nozzles of the CEDM in the APR1400 was simulated. Initial and boundary conditions were determined with respect to the reference conditions of the APR1400. However, with an aim of corresponding to the YGN-3 situation, the safety injection water was supplied via CLI mode. Compared to the cold leg break SBLOCA, the consequences of the event were milder in terms of a loop seal clearance, break flow rate, collapsed water level, and PCT. This could be mainly attributed to the small break flow rate in case of the failure in the RPV upper head. Present experimental data were utilized to resolve the safety issue raised by the PWSCC at the CEDM penetration nozzle of the YGN-3.

Kinetics of penetration of methyl parthion in desert locust, Schistocerca gregaria Forskal

International Nuclear Information System (INIS)

Sethi, G.R.; Garg, A.K.; Bhatia, P.; Mehrotra, K.N.; Bigley, W.S.

1985-01-01

Studies on the rate of disappearance of 14 C-methyl parathion, applied topically on the mesonotum of desert locust, Schistocerca gregaria Forskal revealed that the penetration of this insecticide did not follow the first order kinetics and showed a biphasic pattern. The faster phase of penetration lasted upto 120 min from the time of application (half-life 74+-18 min) whereas, the slower phase which was observed from 120 min to 24 hr had a half-life of 338+-130 min. (author)

Kali Linux wireless penetration testing essentials

CERN Document Server

Alamanni, Marco

2015-01-01

This book is targeted at information security professionals, penetration testers and network/system administrators who want to get started with wireless penetration testing. No prior experience with Kali Linux and wireless penetration testing is required, but familiarity with Linux and basic networking concepts is recommended.

Penetration of sulfur hexafluoride into cellular polypropylene films and its effect on the electric charging and electromechanical response of ferroelectrets

International Nuclear Information System (INIS)

Qiu Xunlin; Wegener, Michael; Wirges, Werner; Zhang Xiaoqing; Hillenbrand, Joachim; Xia Zhongfu; Gerhard-Multhaupt, Reimund; Sessler, Gerhard M

2005-01-01

Cellular polypropylene (PP) films were treated with sulfur hexafluoride (SF 6 ) gas in order to study the SF 6 penetration behaviour and optimize the electric charging conditions. There were differences in the penetration of SF 6 for different cellular PP materials, depending on the microscopic properties, which manifest themselves in the voided structure as well as in the mechanical stiffnesses of the cellular films. The penetration of SF 6 after long-term pressure treatment is confirmed in strongly inflated cellular PP films with a low mechanical stiffness of about 1 MPa. No SF 6 penetration occurs for slightly inflated cellular PP films with smaller void sizes and higher mechanical stiffnesses of around 5.8 MPa. The observed thickness variations, the higher charging fields during corona charging because of SF 6 penetration and the SF 6 environment, as well as the resulting electromechanical properties are discussed

Modelling the existing Irish energy-system to identify future energy costs and the maximum wind penetration feasible

International Nuclear Information System (INIS)

Connolly, D.; Leahy, M.; Lund, H.; Mathiesen, B.V.

2010-01-01

In this study a model of the Irish energy-system was developed using EnergyPLAN based on the year 2007, which was then used for three investigations. The first compares the model results with actual values from 2007 to validate its accuracy. The second illustrates the exposure of the existing Irish energy-system to future energy costs by considering future fuel prices, CO 2 prices, and different interest rates. The final investigation identifies the maximum wind penetration feasible on the 2007 Irish energy-system from a technical and economic perspective, as wind is the most promising fluctuating renewable resource available in Ireland. It is concluded that the reference model simulates the Irish energy-system accurately, the annual fuel costs for Ireland's energy could increase by approximately 58% from 2007 to 2020 if a business-as-usual scenario is followed, and the optimum wind penetration for the existing Irish energy-system is approximately 30% from both a technical and economic perspective based on 2020 energy prices. Future studies will use the model developed in this study to show that higher wind penetrations can be achieved if the existing energy-system is modified correctly. Finally, these results are not only applicable to Ireland, but also represent the issues facing many other countries. (author)

Differences in Femoral Head Penetration Between Highly Cross-Linked Polyethylene Cemented Sockets and Uncemented Liners.

Science.gov (United States)

Morita, Daigo; Seki, Taisuke; Higuchi, Yoshitoshi; Takegami, Yasuhiko; Ishiguro, Naoki

2017-12-01

This study aimed at investigating differences in femoral head penetration between highly cross-linked polyethylene (HXLPE) cemented sockets and uncemented liners during 5 years postoperatively. Ninety-six patients (106 hips) with a mean age of 64.4 (range, 35-83) years underwent total hip arthroplasty using a HXLPE cemented socket or liner and were respectively divided into cemented (35 patients [37 hips]) and uncemented (61 patients [69 hips]) groups. Femoral head penetrations were evaluated on both anteroposterior (AP)-view and Lauenstein-view radiographs, and mean polyethylene (PE) wear rates were calculated based on femoral head penetration from 2 to 5 years. Multivariate analyses were performed to assess risk factors for PE wear. At 5 years postoperatively, the cemented and uncemented groups exhibited proximal direction femoral head penetrations of 0.103 mm and 0.124 mm (P = .226) and anterior direction penetrations of 0.090 mm and 0.151 mm (P = .002), respectively. The corresponding mean PE wear rates were 0.004 mm/y and 0.009 mm/y in the AP-view (P = .286) and 0.005 mm/y and 0.012 mm/y in the Lauenstein-view (P = .168), respectively. Left-side operation and high activity were independent risk factors for PE wear on AP-view. When HXLPE was used, all mean PE wear rates were very low and those of cemented sockets and uncemented liners were very similar. PE particle theory suggests that the occurrence of osteolysis and related aseptic loosening might consequently decrease. Copyright © 2017 Elsevier Inc. All rights reserved.

Skin penetration behaviour of sesquiterpene lactones from different Arnica preparations using a validated GC-MSD method.

Science.gov (United States)

Wagner, Steffen; Merfort, Irmgard

2007-01-04

Preparations of Arnica montana L. are widely used for the topical treatment of inflammatory diseases. The anti-inflammatory activity is mainly attributed to their sesquiterpene lactones (SLs) from the helenalin and 11alpha,13-dihydrohelenalin type. To study the penetration kinetics of SLs in Arnica preparations, a stripping method with adhesive tape and pig skin as a model was used. For the determination of SLs in the stripped layers of the stratum corneum (SC), a gas chromatography/mass spectrometry method was developed and validated. Thereby the amount of helenalin derivatives was calculated as helenalin isobutyrate, and 11alpha,13-dihydrohelenalin derivatives as 11alpha,13-dihydrohelenalin methacrylate. This GC-MSD method is suitable also to determine low amounts of SLs in Arnica preparations. The penetration behaviour of one gel preparation and two ointment preparations was investigated. The SLs of all preparations show a comparable penetration in and a permeation through the stratum corneum, the uppermost part of the skin. Interestingly, the gel preparation showed a decrease of the penetration rate over 4h, whereas the penetration rate of ointments kept constant over time. Moreover, we could demonstrate that the totally penetrated amount of SLs only depends on the kind of the formulation and of the SLs-content in the formulation but not on the SLs composition or on the used extraction agent.

Ethical hacking and penetration testing guide

CERN Document Server

Baloch, Rafay

2014-01-01

Requiring no prior hacking experience, Ethical Hacking and Penetration Testing Guide supplies a complete introduction to the steps required to complete a penetration test, or ethical hack, from beginning to end. You will learn how to properly utilize and interpret the results of modern-day hacking tools, which are required to complete a penetration test. The book covers a wide range of tools, including Backtrack Linux, Google reconnaissance, MetaGooFil, dig, Nmap, Nessus, Metasploit, Fast Track Autopwn, Netcat, and Hacker Defender rootkit. Supplying a simple and clean explanation of how to effectively utilize these tools, it details a four-step methodology for conducting an effective penetration test or hack.Providing an accessible introduction to penetration testing and hacking, the book supplies you with a fundamental understanding of offensive security. After completing the book you will be prepared to take on in-depth and advanced topics in hacking and penetration testing. The book walks you through each ...

Brain responses to vestibular pain and its anticipation in women with Genito-Pelvic Pain/Penetration Disorder.

Science.gov (United States)

Pazmany, Els; Ly, Huynh Giao; Aerts, Leen; Kano, Michiko; Bergeron, Sophie; Verhaeghe, Johan; Peeters, Ronald; Tack, Jan; Dupont, Patrick; Enzlin, Paul; Van Oudenhove, Lukas

2017-01-01

In DSM-5, pain-related fear during anticipation of vaginal penetration is a diagnostic criterion of Genito-Pelvic Pain/Penetration Disorder (GPPPD). We aimed to investigate subjective and brain responses during anticipatory fear and subsequent induction of vestibular pain in women with GPPPD. Women with GPPPD (n = 18) and age-matched healthy controls (HC) (n = 15) underwent fMRI scanning during vestibular pain induction at individually titrated pain threshold after a cued anticipation period. (Pain-related) fear and anxiety traits were measured with questionnaires prior to scanning, and anticipatory fear and pain intensity were rated during scanning using visual analog scales. Women with GPPPD reported significantly higher levels of anticipatory fear and pain intensity. During anticipation and pain induction they had stronger and more extensive brain responses in regions involved in cognitive and affective aspects of pain perception, but the group difference did not reach significance for the anticipation condition. Pain-related fear and anxiety traits as well as anticipatory fear ratings were positively associated with pain ratings in GPPPD, but not in HC. Further, in HC, a negative association was found between anticipatory fear ratings and brain responses in regions involved in cognitive and affective aspects of pain perception, but not in women with GPPPD. Women with GPPPD are characterized by increased subjective and brain responses to vestibular pain and, to a lesser extent, its anticipation, with fear and anxiety associated with responses to pain, supporting the introduction of anticipatory fear as a criterion of GPPPD in DSM-5.

Projectile penetration into ballistic gelatin.

Science.gov (United States)

Swain, M V; Kieser, D C; Shah, S; Kieser, J A

2014-01-01

Ballistic gelatin is frequently used as a model for soft biological tissues that experience projectile impact. In this paper we investigate the response of a number of gelatin materials to the penetration of spherical steel projectiles (7 to 11mm diameter) with a range of lower impacting velocities (projectile velocity are found to be linear for all systems above a certain threshold velocity required for initiating penetration. The data for a specific material impacted with different diameter spheres were able to be condensed to a single curve when the penetration depth was normalised by the projectile diameter. When the results are compared with a number of predictive relationships available in the literature, it is found that over the range of projectiles and compositions used, the results fit a simple relationship that takes into account the projectile diameter, the threshold velocity for penetration into the gelatin and a value of the shear modulus of the gelatin estimated from the threshold velocity for penetration. The normalised depth is found to fit the elastic Froude number when this is modified to allow for a threshold impact velocity. The normalised penetration data are found to best fit this modified elastic Froude number with a slope of 1/2 instead of 1/3 as suggested by Akers and Belmonte (2006). Possible explanations for this difference are discussed. © 2013 Published by Elsevier Ltd.

Sub-hourly impacts of high solar penetrations in the Western United States

Energy Technology Data Exchange (ETDEWEB)

Lew, Debra; Brinkman, Greg; Florita, Anthony; Heaney, Michael; Hodge, Bri-Mathias; Hummon, Marissa; Ibanez, Eduardo [National Renewable Energy Lab. (NREL), Golden, CO (United States); King, Jack [RePPAE, Wexford, PA (United States)

2012-07-01

Until recently, it has been difficult to study the impacts of significant penetrations of hypothetical, utility-scale solar photovoltaic (PV) plants over large geographic regions. This was because of the lack of credible data to simulate the output of these plants with appropriate spatial and temporal correlation, especially on a sub-hourly basis. In the Western Wind and Solar Integration Study Phase 2 (WWSIS2), we used new technigues to synthesize sub-hourly high-resolution solar output for PV rooftops, utility-scale PV, and concentrating solar power (CSP). This allowed us to examine implications of 25 % solar (60/40 split of PV and CSP) and 8 % wind. In this paper, we present results of analysis on the sub-hourly impacts of high solar penetrations. Extreme event analysis showed that most of the large ramps were because of sunrise and sunset events, which have a significant predictability component. Variability in general was much higher with high penetrations of solar than with high penetrations of wind. Reserve methodologies that had already been developed for wind were therefore modified to take into account the predictability component of solar variability. Significantly less transmission was required for high solar penetrations than wind and significantly less curtailment occurred in the high solar cases. (orig.)

Enabling Higher Data Rates for Planetary Science Missions

Science.gov (United States)

Deutsch, L. J.; Townes, S. A.; Lazio, J.; Bell, D. J.; Chahat, N. E.; Kovalik, J. M.; Kuperman, I.; Sauder, J.; Liebrecht, P. E.

2017-12-01

The data rate from deep space spacecraft has increased by more than 10 orders of magnitude since the first lunar missions in the 1960s. The demand for increased data rates has stemmed from the increasing sophistication of the science questions being addressed and the concomitant increase in the complexity of the missions themselves (from fly-by to orbit to land and rove). Projections for the next few decades suggest the demand for data rates for deep space missions will continue to increase by approximately one order of magnitude every decade, driven by these same factors. Achieving higher data rates requires a partnership between the spacecraft and the ground system. We describe a series of technology developments for flight telecommunications systems, both at radio frequency (RF) and optical, to enable spacecraft to transmit and receive larger data volumes. These technology developments include deployable high gain antennas for small spacecraft, re-programmable software-defined radios, and optical communication packages designed for CubeSat form factors. The intent is that these developments would provide enhancements in capability for both spacecraft-Earth and spacecraft-spacecraft telecommunications. We also describe the future planning for NASA's Deep Space Network (DSN), which remains the prime conduit for data from all planetary science missions. Through a combination of new antennas and backends being installed over the next five years and incorporation of optical communications, the DSN aims to ensure that the historical improvements in data rates and volumes will continue for many decades. Part of this research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.

High-strength uranium-0.8 weight percent titanium alloy penetrators

International Nuclear Information System (INIS)

Northcutt, W.G.

1978-09-01

Long-rod kinetic-energy penetrators, produced from a uranium-0.8 titanium (U-0.8 Ti) alloy, are normally water quenched from the gamma phase (approximately 800 0 C) and aged to the desired hardness and strength levels. High cooling rates from 800 0 C in U-0.8 Ti alloy cylindrical bodies larger than about 13 mm in diameter cause internal voids, while slower rates of cooling can produce material that is unresponsive to aging. For the present study, elimination of quenching voids was of paramount importance; therefore, a process including the quenching of plate was explored. Vacuum-induction-cast ingots were forged and rolled into plate and cut into blanks from which the penetrators were obtained. Quenched U-0.8 Ti alloy blanks were aged at 350 to 500 0 C to determine the treatment that would provide maximum tensile and impact strengths. Both tensile and impact strengths were maximized by aging in vacuum for six hours at 450 0 C

The Basics of Hacking and Penetration Testing Ethical Hacking and Penetration Testing Made Easy

CERN Document Server

Engebretson, Patrick

2011-01-01

The Basics of Hacking and Penetration Testing serves as an introduction to the steps required to complete a penetration test or perform an ethical hack. You learn how to properly utilize and interpret the results of modern day hacking tools; which are required to complete a penetration test. Tool coverage will include, Backtrack Linux, Google, Whois, Nmap, Nessus, Metasploit, Netcat, Netbus, and more. A simple and clean explanation of how to utilize these tools will allow you  to gain a solid understanding of each of the four phases and prepare them to take on more in-depth texts and topi

Onychopharmacokinetics of terbinafine hydrochloride penetration from a novel topical formulation into the human nail in vitro.

Science.gov (United States)

Hui, Xiaoying; Lindahl, Åke; Lamel, Sonia; Maibach, Howard I

2013-09-01

This study determined the onychopharmacokinetics, nail absorption, distribution, and penetration of [¹⁴C]-terbinafine HCl in a new topical formulation into/through the human finger nail using the in vitro finite dose model. This study determined the penetration rate of terbinafine HCl from multiple doses of topical formulation applied daily for 14 days. Results showed that the total dose recovery (mass balance) was almost 100%. The concentration of terbinafine HCl in the deeper nail plate (ventral/intermediate layers) and the cotton-pad nail bed samples after the 14-day treatment were 613 ± 145 and (±S.D.) and 27 ± 1.2 µg/cm³ (or 1.9 ± 0.6 µg/cm³ daily) on average, respectively. In comparison with nail concentration data from the literature for other topical terbinatine formulations, our results show that higher amounts of terbinafine HCl reached the deep nail plate and/or the nail bed after a 14-day topical treatment with this topical formulation in vitro.

Respiratory-Induced Haemodynamic Changes: A Contributing Factor to IVC Filter Penetration

International Nuclear Information System (INIS)

Laborda, Alicia; Kuo, William T.; Ioakeim, Ignatios; De Blas, Ignacio; Malvè, Mauro; Lahuerta, Celia; De Gregorio, Miguel A.

2015-01-01

PurposeThe purpose of the study is to evaluate the influence of respiratory-induced vena caval hemodynamic changes on filter migration/penetration.Materials and MethodsAfter placement of either a Gunther Tulip or Celect IVC filter, 101 consecutive patients scheduled for filter retrieval were prospectively enrolled in this study. Pre-retrieval CT scans were used to assess filter complications and to calculate cross-sectional area in three locations: at level of filter strut fixation, 3 cm above and 3 cm below. A 3D finite element simulation was constructed on these data and direct IVC pressure was recorded during filter retrieval. Cross-sectional areas and pressures of the vena cava were measured during neutral breathing and in Valsalva maneuver and identified filter complications were recorded. A statistical analysis of these variables was then performed.ResultsDuring Valsalva maneuvers, a 60 % decrease of the IVC cross-sectional area and a fivefold increase in the IVC pressure were identified (p < 0.001). There was a statistically significant difference in the reduction of the cross-sectional area at the filter strut level (p < 0.001) in patient with filter penetration. Difficulty in filter retrieval was higher in penetrated or tilted filters (p < 0.001; p = 0.005). 3D computational models showed significant IVC deformation around the filter during Valsalva maneuver.ConclusionCaval morphology and hemodynamics are clearly affected by Valsalva maneuvers. A physiological reduction of IVC cross-sectional area is associated with higher risk of filter penetration, despite short dwell times. Physiologic data should be used to improve future filter designs to remain safely implanted over longer dwell times

Respiratory-Induced Haemodynamic Changes: A Contributing Factor to IVC Filter Penetration

Energy Technology Data Exchange (ETDEWEB)

Laborda, Alicia, E-mail: alaborda@unizar.es [Universidad de Zaragoza, Minimally Invasive Techniques Research Group (GITMI) (Spain); Kuo, William T., E-mail: wkuo@stanford.edu [Stanford University Medical Center, Division of Vascular and Interventional Radiology (United States); Ioakeim, Ignatios, E-mail: ignacio.ioakim@hotmail.es [Universidad de Zaragoza, Minimally Invasive Techniques Research Group (GITMI) (Spain); De Blas, Ignacio, E-mail: deblas@unizar.es [Universidad de Zaragoza, Unit of Infectious Diseases and Epidemiology, Department of Animal Pathology (Spain); Malvè, Mauro, E-mail: mauro.malve@unavarra.es [Universidad Pública de Navarra, Department of Mechanical, Energy and Materials Engineering (Spain); Lahuerta, Celia, E-mail: celialahuerta@gmail.com; De Gregorio, Miguel A., E-mail: mgregori@unizar.es [Universidad de Zaragoza, Minimally Invasive Techniques Research Group (GITMI) (Spain)

2015-10-15

PurposeThe purpose of the study is to evaluate the influence of respiratory-induced vena caval hemodynamic changes on filter migration/penetration.Materials and MethodsAfter placement of either a Gunther Tulip or Celect IVC filter, 101 consecutive patients scheduled for filter retrieval were prospectively enrolled in this study. Pre-retrieval CT scans were used to assess filter complications and to calculate cross-sectional area in three locations: at level of filter strut fixation, 3 cm above and 3 cm below. A 3D finite element simulation was constructed on these data and direct IVC pressure was recorded during filter retrieval. Cross-sectional areas and pressures of the vena cava were measured during neutral breathing and in Valsalva maneuver and identified filter complications were recorded. A statistical analysis of these variables was then performed.ResultsDuring Valsalva maneuvers, a 60 % decrease of the IVC cross-sectional area and a fivefold increase in the IVC pressure were identified (p < 0.001). There was a statistically significant difference in the reduction of the cross-sectional area at the filter strut level (p < 0.001) in patient with filter penetration. Difficulty in filter retrieval was higher in penetrated or tilted filters (p < 0.001; p = 0.005). 3D computational models showed significant IVC deformation around the filter during Valsalva maneuver.ConclusionCaval morphology and hemodynamics are clearly affected by Valsalva maneuvers. A physiological reduction of IVC cross-sectional area is associated with higher risk of filter penetration, despite short dwell times. Physiologic data should be used to improve future filter designs to remain safely implanted over longer dwell times.

Ground penetrating radar

CERN Document Server

Daniels, David J

2004-01-01

Ground-penetrating radar has come to public attention in recent criminal investigations, but has actually been a developing and maturing remote sensing field for some time. In the light of recent expansion of the technique to a wide range of applications, the need for an up-to-date reference has become pressing. This fully revised and expanded edition of the best-selling Surface-Penetrating Radar (IEE, 1996) presents, for the non-specialist user or engineer, all the key elements of this technique, which span several disciplines including electromagnetics, geophysics and signal processing. The

Plutonium in depleted uranium penetrators

International Nuclear Information System (INIS)

McLaughlin, J.P.; Leon-Vintro, L.; Smith, K.; Mitchell, P.I.; Zunic, Z.S.

2002-01-01

Depleted Uranium (DU) penetrators used in the recent Balkan conflicts have been found to be contaminated with trace amounts of transuranic materials such as plutonium. This contamination is usually a consequence of DU fabrication being carried out in facilities also using uranium recycled from spent military and civilian nuclear reactor fuel. Specific activities of 239+240 Plutonium generally in the range 1 to 12 Bq/kg have been found to be present in DU penetrators recovered from the attack sites of the 1999 NATO bombardment of Kosovo. A DU penetrator recovered from a May 1999 attack site at Bratoselce in southern Serbia and analysed by University College Dublin was found to contain 43.7 +/- 1.9 Bq/kg of 239+240 Plutonium. This analysis is described. An account is also given of the general population radiation dose implications arising from both the DU itself and from the presence of plutonium in the penetrators. According to current dosimetric models, in all scenarios considered likely ,the dose from the plutonium is estimated to be much smaller than that due to the uranium isotopes present in the penetrators. (author)

Managed Care Penetration and the Use of Screening Mammography by Uninsured Women

National Research Council Canada - National Science Library

Garg, Pushkal

2003-01-01

..., and increased waiting times for mammography. In this study, we examined whether there was an association between managed care penetration and rates of mammography among uninsured women between 50 and 64 years of age...

Numerical simulation of water and sand blowouts when penetrating through shallow water flow formations in deep water drilling

Science.gov (United States)

Ren, Shaoran; Liu, Yanmin; Gong, Zhiwu; Yuan, Yujie; Yu, Lu; Wang, Yanyong; Xu, Yan; Deng, Junyu

2018-02-01

In this study, we applied a two-phase flow model to simulate water and sand blowout processes when penetrating shallow water flow (SWF) formations during deepwater drilling. We define `sand' as a pseudo-component with high density and viscosity, which can begin to flow with water when a critical pressure difference is attained. We calculated the water and sand blowout rates and analyzed the influencing factors from them, including overpressure of the SWF formation, as well as its zone size, porosity and permeability, and drilling speed (penetration rate). The obtained data can be used for the quantitative assessment of the potential severity of SWF hazards. The results indicate that overpressure of the SWF formation and its zone size have significant effects on SWF blowout. A 10% increase in the SWF formation overpressure can result in a more than 90% increase in the cumulative water blowout and a 150% increase in the sand blowout when a typical SWF sediment is drilled. Along with the conventional methods of well flow and pressure control, chemical plugging, and the application of multi-layer casing, water and sand blowouts can be effectively reduced by increasing the penetration rate. As such, increasing the penetration rate can be a useful measure for controlling SWF hazards during deepwater drilling.

Capacity Payments in Restructured Markets under Low and High Penetration Levels of Renewable Energy

Energy Technology Data Exchange (ETDEWEB)

Thomas Jenkin, Philipp Beiter, and Robert Margolis

2016-02-01

Growing levels of variable renewable energy resources arguably create new challenges for capacity market designs, because variable renewable energy suppresses wholesale energy prices while providing relatively little capacity. This effect becomes more pronounced the higher the variable renewable energy penetration in a market. The purpose of this report is threefold. First, we provide a brief outline of the purpose and design of various capacity markets using administratively determined capacity demand curves. Second, we discuss some of the main challenges raised in existing literature and a set of interviews that we conducted with market participants, regulators, and observers. Third, we consider some of the challenges to capacity markets that arise with higher variable renewable energy penetration.

Concentrated solar power plants impact on PV penetration level and grid flexibility under Egyptian climate

Science.gov (United States)

Moukhtar, Ibrahim; Elbaset, Adel A.; El Dein, Adel Z.; Qudaih, Yaser; Mitani, Yasunori

2018-05-01

Photovoltaic (PV) system integration in the electric grid has been increasing over the past decades. However, the impact of PV penetration on the electric grid, especially during the periods of higher and lower generation for the solar system at the middle of the day and during cloudy weather or at night respectively, limit the high penetration of solar PV system. In this research, a Concentrated Solar Power (CSP) with Thermal Energy Storage (TES) has been aggregated with PV system in order to accommodate the required electrical power during the higher and lower solar energy at all timescales. This paper analyzes the impacts of CSP on the grid-connected PV considering high penetration of PV system, particularly when no energy storages in the form of batteries are used. Two cases have been studied, the first when only PV system is integrated into the electric grid and the second when two types of solar energy (PV and CSP) are integrated. The System Advisor Model (SAM) software is used to simulate the output power of renewable energy. Simulation results show that the performance of CSP has a great impact on the penetration level of PV system and on the flexibility of the electric grid. The overall grid flexibility increases due to the ability of CSP to store and dispatch the generated power. In addition, CSP/TES itself has inherent flexibility. Therefore, CSP reduces the minimum generation constraint of the conventional generators that allows more penetration of the PV system.

United States private schools have higher rates of exemptions to school immunization requirements than public schools.

Science.gov (United States)

Shaw, Jana; Tserenpuntsag, Boldtsetseg; McNutt, Louise-Anne; Halsey, Neal

2014-07-01

To compare medical, religious, and personal belief immunization exemption rates between private and public schools in US. Exemption rates were calculated using the Centers for Disease Control and Prevention School Immunization Assessment Surveys for the 2009-2010 school year excluding states with incomplete survey data. Standardized exemption rates weighted on enrollments in public and private schools were calculated. Differences in exemption rates between public and private schools were tested using Wilcoxon signed rank test. The overall state exemption rate was higher in US private than public schools, 4.25% (SD 4.27) vs 1.91% (1.67), P = .0001 and private schools had higher exemption rates for all types of exemptions; medical 0.58% (0.71) vs 0.34% (0.34) respectively (P = .0004), religious 2.09% (3.14) vs 0.83% (1.05) respectively (P = .0001), and personal belief 6.10% (4.12) vs 2.79% (1.57), respectively (P = .006). Overall exemption rates were significantly higher in states that allowed personal belief exemptions. Exemption rates were significantly higher in US private than in public schools. Children attending private schools may be at higher risk of vaccine-preventable diseases than public school children. Copyright © 2014 Elsevier Inc. All rights reserved.

Effect of Projectile Rotation Rate on Lateral Effect of PELE Penetrating Reinforced Concrete Target%弹丸转速对PELE侵彻钢筋混凝土靶横向效应的影响

Institute of Scientific and Technical Information of China (English)

何俊; 徐立志; 程春; 郑绍君; 杜忠华; 蒋洪章

2017-01-01

为了研究弹丸转速对横向效应增强型侵彻体(PELE)侵彻钢筋混凝土靶横向效应的影响,运用ANSYS/LS-DYNA软件在着靶速度600、700和800m/s条件下,对具有不同转速的PELE侵彻钢筋混凝土靶进行数值模拟,并通过试验方法对不同着靶条件下的仿真模型进行验证.结果表明,开孔尺寸的数值模拟结果与实验结果之间的误差小于5%,仿真模型能够准确模拟PELE侵彻钢筋混凝土靶的过程;随着转速的不断提高,损失更多的转速动能转化为钢筋混凝土靶开孔破坏所需的能量,使钢筋混凝土靶的开孔尺寸增大;在同一着靶速度下,转速从10000r/min提高至25000r/min,开孔尺寸提高了约(8±2)%.因此,在同一着靶速度下,增加弹丸转速有利于提高PELE对钢筋混凝土靶的开孔尺寸.%To study the effect of projectile rotation rate on the lateral effect of penetrator with enhanced lateral effects (PELE)penetrating reinforced concrete target, the numerical simulation of PELE penetrating reinforced concrete target with different rotation rates was performed under the condition of three impact target velocities of 600,700 and 800m/s,and the simulation model under the conditions of different impact target was verified by testing method.The results show that the error of opening size between the simulation results and the experimental ones is less than 5%, showing that the simulation model can accurately simulate the process of PELE penetrating reinforced concrete target.With increasing the rotation rate, more rotation rate kinetic energy lost translates into the energy that used to break the reinforced concrete target and make the opening size of reinforced concrete target increase.Under the same impact target velocity, opening size is improved by (8±2)% when the rotation rate increases from 10000r/min to 25000r/min.Therefore, increasing projectile rotation rate is beneficial to improve the opening size of the PELE penetrating

Ethical Dilemmas and Dimensions in Penetration Testing

OpenAIRE

Faily, Shamal; McAlaney, John; Iacob, C.

2015-01-01

Penetration testers are required to attack systems to evaluate their security, but without engaging in unethical behaviour while doing so. Despite work on hacker values and studies into security practice, there is little literature devoted to the ethical pressures associated with penetration testing. This paper presents several ethical dilemmas and dimensions associated with penetration testing;\\ud these shed light on the ethical positions taken by Penetration testers, and help identify poten...

An Experimental Investigation on APR1400 Penetration Weld Failure by Metallic Melt

International Nuclear Information System (INIS)

An, Sang Mo; Ha, Kwang Soon; Kim, Hwan Yeol

2014-01-01

The penetrations are considered as the most vulnerable parts with respect to the reactor vessel failure when a core melt severe accident occurs and the corium reaches the lower head. Penetration tube failure modes can be divided into two categories; tube ejection out of the vessel lower head and rupture of the penetration tube outside the vessel. Tube ejection begins with degrading the penetration tube weld strength to zero as the weld is exposed to temperatures as high as the weld melting temperature, which is called weld failure, and then overcoming any binding force in the hole in the vessel wall that results from differential thermal expansion of the tube and vessel wall. Tube rupture assumes that the debris bed has melted the instrument tube inside the reactor and melt migrates down into the tube to a location outside the vessel wall where a pressure rupture can occur, thus breaching the pressure boundary. In the present paper, we have a focus on the tube ejection failure mode, specifically on the APR1400 weld failure by direct contact with a metallic melt. The objective is to investigate experimentally the ablation kinetics of an APR1400 penetration weld during the interactions with a metallic melt and to suggest the modification of the existing weld failure model. This paper involves the interaction experiments of two different metallic melts (metallic corium and stainless steel melts) with a weld specimen, and rough estimation of weld failure time. The interaction experiments between the metallic melts and an APR1400 penetration weld were performed to investigate the ablation kinetics of the penetration weld. Metallic corium and stainless steel melts were generated using an induction heating technique and interacted with a penetration weld specimen. The ablation rate of the weld specimen showed a range from 0.109 to 0..244 mm/s and thus the APR1400 penetration weld was estimated to be failed at hundreds of times after the interaction with the melt

Vastus Lateralis Motor Unit Firing Rate Is Higher in Women With Patellofemoral Pain.

Science.gov (United States)

Gallina, Alessio; Hunt, Michael A; Hodges, Paul W; Garland, S Jayne

2018-05-01

To compare neural drive, determined from motor unit firing rate, in the vastus medialis and lateralis in women with and without patellofemoral pain. Cross-sectional study. University research laboratory. Women (N=56) 19 to 35 years of age, including 36 with patellofemoral pain and 20 controls. Not applicable. Participants sustained an isometric knee extension contraction at 10% of their maximal voluntary effort for 70 seconds. Motor units (N=414) were identified using high-density surface electromyography. Average firing rate was calculated between 5 and 35 seconds after recruitment for each motor unit. Initial firing rate was the inverse of the first 3 motor unit interspike intervals. In control participants, vastus medialis motor units discharged at higher rates than vastus lateralis motor units (P=.001). This was not observed in women with patellofemoral pain (P=.78) because of a higher discharge rate of vastus lateralis compared with control participants (P=.002). No between-group differences were observed for vastus medialis (P=.93). Similar results were obtained for the initial motor unit firing rate. These findings suggest that women with patellofemoral pain have a higher neural drive to vastus lateralis but not vastus medialis, which may be a contributor of the altered patellar kinematics observed in some studies. The different neural drive may be an adaptation to patellofemoral pain, possibly to compensate for decreased quadriceps force production, or a precursor of patellofemoral pain. Copyright © 2018 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

In vitro investigation of the follicular penetration of porcine ear skin using a nanoparticle-emulsion containing the antiseptic polihexanide In vitro investigation of the follicular penetration of porcine ear skin

Science.gov (United States)

Ulmer, M.; Patzelt, A.; Vergou, T.; Lademann, J.; Richter, H.; Kramer, A.; Müller, G.; Sterry, W.; Lange-Asschenfeldt, B.

2012-05-01

Earlier investigations regarding the distribution of the bacterial flora on the human skin demonstrate that the hair follicle acts as a bacterial reservoir, providing a quick source for secondary recontamination. These findings highlight the importance of the hair follicle as a target for modern antiseptics. In the present study, we have assessed the follicular penetration of a curcumin-labeled particle-associated antiseptic into porcine skin by laser scanning microscopy. Therefore, the follicular penetration depth of the curcumin-labeled particle-associated antiseptic was compared to the follicular penetration depth of curcumin-labeled particles without antiseptic. The investigation was performed in vitro using porcine skin biopsies. By superposition of the images acquired in the transmission and the fluorescent modus, it was possible to visualize the distribution of the fluorescent dye inside the hair follicles. Quantitative and qualitative results showed that both dispersions penetrated efficiently into the hair follicles. The average penetration depth of the particles with attached antiseptic polihexanide was significantly higher than that of particles without the attached antiseptic. Also, whilst very little sample preparation was needed, laser scanning microscopy was found to be an efficient tool to visualize the skin relief and in particular the hair follicle shaft and localize fluorescent markers within the skin tissue and hair follicles.

Managed Care Penetration and the Use of Screening Mammography by Uninsured Women

National Research Council Canada - National Science Library

Garg, Pushkal

2002-01-01

..., and increased waiting times for mammography. In this study we propose to examine whether there is an association between managed care penetration and rates of mammography among uninsured women between 50 and 64 years of age...

An experimental study of aerosol penetration through horizontal tubes and strom-type loops

International Nuclear Information System (INIS)

Wong, F.S.; McFarland, A.R.; Anand, N.K.

1996-01-01

Because some designers of aerosol transport systems use the assumption that aerosol penetration through a system is maximized of the flow Reynolds number is 2,800, we have conducted tests to determine if such an assumption is appropriate. Although we do not believe that optimal performance of an aerosol sample transport system can be presented solely in terms of the Reynolds number, we have presented our results in terms of that parameter to compare our work with the results of an earlier study. Two types of experiments were performed. First, the penetration of liquid aerosol particles through horizontal tubes was experimentally investigated for a range of design and operational conditions. For a particle size of 10 μm aerodynamic diameter, the maximum penetration through a 6.7 mm diameter tube was associated with a Reynolds number of approximately 2,000; the maximum penetration through a tube of 15.9 mm occurred at a Reynolds number of about 3,000; and the maximum penetration through a 26.7 mm diameter tube occurred at about 4,000. It was also experimentally demonstrated that for a fixed flow rate through a horizontal tube, there is an optimum tube diameter for which the aerosol penetration is a maximum. An early study dealing with aerosol particle penetration through a 16.8 mm inside diameter loop of tubing (two vertical tubes, two horizontal tubes and three 90 degrees bends) suggested there was a fixed Reynolds number for optimal aerosol penetration independent of particle size. Those experiments were repeated here and the agreement with those tests is excellent. 16 refs., 8 figs., 3 tabs

Aerosol penetration through capillaries and leaks: experimental studies on the influence of pressure

International Nuclear Information System (INIS)

Morton, D.A.V.; Mitchell, J.P.

1995-01-01

It is important to understand the movement of aerosols through ultrafine leak-paths with dimensions of similar order to the gas-borne particles when assessing the validity of leak-testing procedures for transport containers for radioactive materials. Experiments have been undertaken to investigate the penetration of micron-sized airborne particles using glass micro-capillaries as model leak-paths. Previous studies demonstrated a simple relationship between air leakage and total particle penetration rates at a constant driving pressure (100 kPa). The present work has demonstrated the importance of pressure in regulating the rate at which the leak-path is plugged by deposited particles. Much of this deposition appears to take place at the entrances of the capillaries where the air-flow converges. (author)

Skull penetrating wound

International Nuclear Information System (INIS)

Gonzalez Orlandi, Yvei; Junco Martin, Reinel; Rojas Manresa, Jorge; Duboy Limonta, Victor; Matos Herrera, Omar; Saez Corvo, Yunet

2011-01-01

The cranioencephalic trauma is common in the emergence centers to care for patients with multiple traumata and it becames in a health problem in many countries. Skull penetrating trauma is located in a special place due to its low frequency. In present paper a case of male patient aged 52 severely skull-injured with penetrating wound caused by a cold steel that remained introduced into the left frontotemporal region. After an imaging study the emergence surgical treatment was applied and patient evolves adequately after 25 days of hospitalization. Nowadays, she is under rehabilitation treatment due to a residual right hemiparesis.(author)

Intrauterine Devices Penetrated and Migrated: CT Findings

International Nuclear Information System (INIS)

Mejia Restrepo, Jorge; Lopez, Juan Esteban; Aldana Sepulveda, Natalia; Ruiz Zabaleta, Tania; Mazzaro Mauricio

2011-01-01

Intrauterine devices have been used for over 40 years, and they constitute the most widely accepted method of contraception among women because of the low rates of complications and low cost. Although uncommon, with the growing use of multidetector CT penetrated and migrated intrauterine devices have become a more common incidental finding. In some cases, intrauterine devices migrate to adjacent viscera, in particular the bladder and bowel and may give rise to symptoms. Consequently tomographic localization and characterization are essential for treatment planning.

MDCT diagnosis of penetrating diaphragm injury

Energy Technology Data Exchange (ETDEWEB)

Bodanapally, Uttam K.; Shanmuganathan, Kathirkamanathan; Mirvis, Stuart E.; Sliker, Clint W.; Fleiter, Thorsten R.; Sarada, Kamal; Miller, Lisa A. [University of Maryland School of Medicine, Department of Diagnostic Radiology, Baltimore, MD (United States); Stein, Deborah M. [University of Maryland, Department of Surgery, Shock Trauma Center, Baltimore, MD (United States); Alexander, Melvin [National Study Center for Trauma and Emergency Medical Systems, Baltimore, MD (United States)

2009-08-15

The purpose of the study was to determine the diagnostic sensitivity and specificity of multidetector CT (MDCT) in detection of diaphragmatic injury following penetrating trauma. Chest and abdominal CT examinations performed preoperatively in 136 patients after penetrating trauma to the torso with injury trajectory in close proximity to the diaphragm were reviewed by radiologists unaware of surgical findings. Signs associated with diaphragmatic injuries in penetrating trauma were noted. These signs were correlated with surgical diagnoses, and their sensitivity and specificity in assisting the diagnosis were calculated. CT confirmed diaphragmatic injury in 41 of 47 injuries (sensitivity, 87.2%), and an intact diaphragm in 71 of 98 patients (specificity, 72.4%). The overall accuracy of MDCT was 77%. The most accurate sign helping the diagnosis was contiguous injury on either side of the diaphragm in single-entry penetrating trauma (sensitivity, 88%; specificity, 82%). Thus MDCT has high sensitivity and good specificity in detecting penetrating diaphragmatic injuries. (orig.)

MDCT diagnosis of penetrating diaphragm injury

International Nuclear Information System (INIS)

Bodanapally, Uttam K.; Shanmuganathan, Kathirkamanathan; Mirvis, Stuart E.; Sliker, Clint W.; Fleiter, Thorsten R.; Sarada, Kamal; Miller, Lisa A.; Stein, Deborah M.; Alexander, Melvin

2009-01-01

The purpose of the study was to determine the diagnostic sensitivity and specificity of multidetector CT (MDCT) in detection of diaphragmatic injury following penetrating trauma. Chest and abdominal CT examinations performed preoperatively in 136 patients after penetrating trauma to the torso with injury trajectory in close proximity to the diaphragm were reviewed by radiologists unaware of surgical findings. Signs associated with diaphragmatic injuries in penetrating trauma were noted. These signs were correlated with surgical diagnoses, and their sensitivity and specificity in assisting the diagnosis were calculated. CT confirmed diaphragmatic injury in 41 of 47 injuries (sensitivity, 87.2%), and an intact diaphragm in 71 of 98 patients (specificity, 72.4%). The overall accuracy of MDCT was 77%. The most accurate sign helping the diagnosis was contiguous injury on either side of the diaphragm in single-entry penetrating trauma (sensitivity, 88%; specificity, 82%). Thus MDCT has high sensitivity and good specificity in detecting penetrating diaphragmatic injuries. (orig.)

FAA Fluorescent Penetrant Laboratory Inspections

Energy Technology Data Exchange (ETDEWEB)

WINDES,CONNOR L.; MOORE,DAVID G.

2000-08-02

The Federal Aviation Administration Airworthiness Assurance NDI Validation Center currently assesses the capability of various non-destructive inspection (NDI) methods used for analyzing aircraft components. The focus of one such exercise is to evaluate the sensitivity of fluorescent liquid penetrant inspection. A baseline procedure using the water-washable fluorescent penetrant method defines a foundation for comparing the brightness of low cycle fatigue cracks in titanium test panels. The analysis of deviations in the baseline procedure will determine an acceptable range of operation for the steps in the inspection process. The data also gives insight into the depth of each crack and which step(s) of the inspection process most affect penetrant sensitivities. A set of six low cycle fatigue cracks produced in 6.35-mm thick Ti-6Al-4V specimens was used to conduct the experiments to produce sensitivity data. The results will document the consistency of the crack readings and compare previous experiments to find the best parameters for water-washable penetrant.

Treatment of penetrating hepatic injuries: a retrospective analysis of 50 patients.

Science.gov (United States)

Gonullu, D; Koksoy, F N; Ilgun, S; Demiray, O; Yucel, O; Yucel, T

2009-01-01

The aim of this study was to determine the possibility of non-operative treatment via retrospective analysis of our patients. Fifty patients with penetrating hepatic injuries were examined retrospectively with respect to trauma scores, associated injuries, complications, and mortality parameters. Thirteen injuries were caused by firearms, whereas 37 injuries were caused by stab wounds. Forty-three patients (86%) underwent laparotomy and 7 patients (14%) were monitored by CT and clinical findings (nonoperative group, NO group). The laparotomies were evaluated as non-therapeutic in 11 patients (22%) (NTL group) and therapeutic in 32 patients (64%) (TL group). The morbidity and mortality rates were 40 and 10%, respectively. RTS and ISS scores of the nonsurviving and the surviving patients were significantly different. The rates of major venous, grade IV-V hepatic injuries, and gunshot wounds were significantly higher in the nonsurviving patients when compared to the surviving patients. Major venous and grade IV-V hepatic injuries were the primary factors determining mortality and these injuries generally occurred as a result of firearm injuries. NTL occurring at a rate of 22% would decrease to 2% if 'RTS <7' criteria was added to the hemodynamic instability and/or peritoneal irritation findings determining surgical candidacy. Copyright 2009 S. Karger AG, Basel.

Organic Pollutant Penetration through Fruit Polyester Skin: A Modified Three-compartment Diffusion Model.

Science.gov (United States)

Li, Yungui; Li, Qingqing; Chen, Baoliang

2016-03-24

The surface of plants is covered by a continuous but heterogeneous cuticular membrane (CM). Serving as the first protective barrier, the uptake and transport behavior of organic pollutants at this interface continue to engage the research efforts of environmental chemist. To date, the contributions of cuticular components as a defense against the organic pollutants penetration remain unresolved. In this study, the unsteady-state penetration characteristics of phenanthrene (PHE) through isolated fruit CM was investigated. PHE penetration was differentiated by three cuticular compartments: epicuticular waxes (EW), cuticle proper (CP) and cuticular layer (CL). The driving force for PHE penetration was ascribed to the sharp concentration gradient built up endogenously by cuticular compartments with different lipophilic affinities. A modified penetration model was established and verified in terms of its general suitability for the hydrophobic chemicals and CMs of various plant species (apple, tomato and potato). The new three-compartment model demonstrates much higher accuracy in characterizing the uptake and transport behavior of semivolatile chemicals with fewer limitations in terms of environmental conditions and complexity (e.g., coexisting contaminants and temperature). This model could contribute to a more comprehensive understanding on the role of polymeric lipids in the organic pollutant sorption and transport into plants.

Operating methods to remove the excess of penetrant in surface. Preponderant and characteristic part of water for water washable penetrants

International Nuclear Information System (INIS)

Dubosc, P.

1985-01-01

Penetrant use for quality control, although very well known (nuclear, space industries, offshore platforms) is often poorly practiced. This is largely due to a lack of understanding by the users the way that the different components of the system (penetrants, solvents, emulsifiers, and developers) function. In this talk, we shall explain a particular characteristic that the manufacturers of reputable penetrant seek to build into their water washable penetrants. It is a viscosity curve which has the function of keeping water in a well defined form. We show why the form of the curve is crucial, which reaction between water and penetrant it corresponds to, and we deduce the practical consequences of bringing into play procedures for removing excess penetrant with or without water [fr

Effects of egg shell quality and washing on Salmonella Infantis penetration.

Science.gov (United States)

Samiullah; Chousalkar, K K; Roberts, J R; Sexton, M; May, D; Kiermeier, A

2013-07-15

The vast majority of eggs in Australia are washed prior to packing to remove dirt and fecal material and to reduce the microbial contamination of the egg shell. The egg contents can be an ideal growth medium for microorganisms which can result in human illness if eggs are stored improperly and eaten raw or undercooked, and it is estimated that egg-related salmonellosis is costing Australia $44 million per year. Egg shell characteristics such as shell thickness, amount of cuticle present, and thickness of individual egg shell layers can affect the ease with which bacteria can penetrate the egg shell and washing could partially or completely remove the cuticle layer. The current study was conducted to investigate the effects of egg washing on cuticle cover and effects of egg shell quality and cuticle cover on Salmonella Infantis penetration of the egg shell. A higher incidence of unfavorable ultrastructural variables of the mammillary layer such as late fusion, type B bodies, type A bodies, poor cap quality, alignment, depression, erosion and cubics were recorded in Salmonella penetrated areas of egg shells. The influence of egg washing on the ability of Salmonella Infantis on the egg shell surface to enter the egg internal contents was also investigated using culture-based agar egg penetration and real-time qPCR based experiments. The results from the current study indicate that washing affected cuticle cover. There were no significant differences in Salmonella Infantis penetration of washed or unwashed eggs. Egg shell translucency may have effects on Salmonella Infantis penetration of the egg shell. The qPCR assay was more sensitive for detection of Salmonella Infantis from egg shell wash and internal contents than traditional microbiological methods. The agar egg and whole egg inoculation experiments indicated that Salmonella Infantis penetrated the egg shells. Egg washing not only can be highly effective at removing Salmonella Infantis from the egg shell surface

Terminal ballistics of a reduced-mass penetrator. Final report, January 1990--December 1995

Energy Technology Data Exchange (ETDEWEB)

Silsby, G.F.

1996-07-01

This report presents the results of an experimental program to examine the performance of a reduced-mass concept penetrator impacting semi-infinite rolled homogeneous armor (RHA) at normal incidence. The reduced-mass penetrator used in this program is a solid tungsten alloy rod with eight holes drilled parallel to its axis, equally spaced on a circle, with axes parallel to the rod axis. Its performance was contrasted with baseline data for length-to- diameter ratios (L/D) 4 and 5 solid tungsten alloy penetrators. Striking velocity was nominally 1.6 km/s. A determined effort to reduce the scatter in the data by analysis of collateral data from the US Army Research Laboratory (ARL) and literature sources suggested only a rather weak influence of L/D on penetration even at L/Ds approaching 1 and provided a tentative relationship to remove the influence of target lateral edge effects. It tightened up the holed-out rod data enough to be able to conclude with a moderate degree of certainty that there was no improvement in penetration as suggested by a simplistic density law model. A companion work by Kimsey of ARL examines the performance of this novel penetrator concept computationally, using the Eulerian code CTH. His work explains the possible causes of reduced performance suggested by analysis by Zook and Frank of ARL, though with some relative improvement in performance at higher velocities.

Fleet-Car Market PENetration Simulator: CPEN user's guide

Energy Technology Data Exchange (ETDEWEB)

Weil, R.

1980-08-01

The purpose of this manual is to assist prospective users in the understanding and execution of Fleet-Car Market PENetration Simulator (CPEN). CPEN is an interactive FORTRAN program whose purpose is to produce estimates of fleet-market-penetration rates of alternative passenger cars that can be described in terms of specific physical and economic attributes. The data were derived from questionnaires distributed to fleet operators affiliated with National Association of Fleet Administrators (NAFA). Besides the NAFA data, CPEN uses 48 variables that are interactively inserted. Complete data-input descriptions are included in the manual along with algorithm and application flowcharts. Examples of complete successful simulator runs are included for alternative program paths. A listing of the computer program and a glossary for CPEN are included.

Percutaneous penetration enhancement effect of essential oil of mint (Mentha haplocalyx Briq. on Chinese herbal components with different lipophilicity

Directory of Open Access Journals (Sweden)

Jingyan Wang

2014-10-01

Conclusions: Mint oil at proper concentration could effectively facilitate percutaneous penetration of both lipophilic and hydrophilic drugs, and exhibit higher efficiency for moderate hydrophilic drugs. Mechanisms of penetration enhancement by mint oil could be explained with saturation solubility, SC/vehicle partition coefficient and the secondary structure change of SC.

Affinity Labeling of Membrane Receptors Using Tissue-Penetrating Radiations

Directory of Open Access Journals (Sweden)

Franklin C. Wong

2013-01-01

Full Text Available Photoaffinity labeling, a useful in vivo biochemical tool, is limited when applied in vivo because of the poor tissue penetration by ultraviolet (UV photons. This study investigates affinity labeling using tissue-penetrating radiation to overcome the tissue attenuation and irreversibly label membrane receptor proteins. Using X-ray (115 kVp at low doses (<50 cGy or Rad, specific and irreversible binding was found on striatal dopamine transporters with 3 photoaffinity ligands for dopamine transporters, to different extents. Upon X-ray exposure (115 kVp, RTI-38 and RTI-78 ligands showed irreversible and specific binding to the dopamine transporter similar to those seen with UV exposure under other conditions. Similarly, gamma rays at higher energy (662 keV also affect irreversible binding of photoreactive ligands to peripheral benzodiazepine receptors (by PK14105 and to the dopamine (D2 membrane receptors (by azidoclebopride, respectively. This study reports that X-ray and gamma rays induced affinity labeling of membrane receptors in a manner similar to UV with photoreactive ligands of the dopamine transporter, D2 dopamine receptor (D2R, and peripheral benzodiazepine receptor (PBDZR. It may provide specific noninvasive irreversible block or stimulation of a receptor using tissue-penetrating radiation targeting selected anatomic sites.

Spherical and cylindrical cavity expansion models based prediction of penetration depths of concrete targets.

Directory of Open Access Journals (Sweden)

Xiaochao Jin

Full Text Available The cavity expansion theory is most widely used to predict the depth of penetration of concrete targets. The main purpose of this work is to clarify the differences between the spherical and cylindrical cavity expansion models and their scope of application in predicting the penetration depths of concrete targets. The factors that influence the dynamic cavity expansion process of concrete materials were first examined. Based on numerical results, the relationship between expansion pressure and velocity was established. Then the parameters in the Forrestal's formula were fitted to have a convenient and effective prediction of the penetration depth. Results showed that both the spherical and cylindrical cavity expansion models can accurately predict the depth of penetration when the initial velocity is lower than 800 m/s. However, the prediction accuracy decreases with the increasing of the initial velocity and diameters of the projectiles. Based on our results, it can be concluded that when the initial velocity is higher than the critical velocity, the cylindrical cavity expansion model performs better than the spherical cavity expansion model in predicting the penetration depth, while when the initial velocity is lower than the critical velocity the conclusion is quite the contrary. This work provides a basic principle for selecting the spherical or cylindrical cavity expansion model to predict the penetration depth of concrete targets.

A higher chest compression rate may be necessary for metronome-guided cardiopulmonary resuscitation.

Science.gov (United States)

Chung, Tae Nyoung; Kim, Sun Wook; You, Je Sung; Cho, Young Soon; Chung, Sung Phil; Park, Incheol

2012-01-01

Metronome guidance is a simple and economical feedback system for guiding cardiopulmonary resuscitation (CPR). However, a recent study showed that metronome guidance reduced the depth of chest compression. The results of previous studies suggest that a higher chest compression rate is associated with a better CPR outcome as compared with a lower chest compression rate, irrespective of metronome use. Based on this finding, we hypothesized that a lower chest compression rate promotes a reduction in chest compression depth in the recent study rather than metronome use itself. One minute of chest compression-only CPR was performed following the metronome sound played at 1 of 4 different rates: 80, 100, 120, and 140 ticks/min. Average compression depths (ACDs) and duty cycles were compared using repeated measures analysis of variance, and the values in the absence and presence of metronome guidance were compared. Both the ACD and duty cycle increased when the metronome rate increased (P = .017, metronome rates of 80 and 100 ticks/min were significantly lower than those for the procedures without metronome guidance. The ACD and duty cyle for chest compression increase as the metronome rate increases during metronome-guided CPR. A higher rate of chest compression is necessary for metronome-guided CPR to prevent suboptimal quality of chest compression. Copyright © 2012 Elsevier Inc. All rights reserved.

Costs and clinical quality among Medicare beneficiaries: associations with health center penetration of low-income residents.

Science.gov (United States)

Sharma, Ravi; Lebrun-Harris, Lydie A; Ngo-Metzger, Quyen

2014-01-01

Determine the association between access to primary care by the underserved and Medicare spending and clinical quality across hospital referral regions (HRRs). Data on elderly fee-for-service beneficiaries across 306 HRRs came from CMS' Geographic Variation in Medicare Spending and Utilization database (2010). We merged data on number of health center patients (HRSA's Uniform Data System) and number of low-income residents (American Community Survey). We estimated access to primary care in each HRR by "health center penetration" (health center patients as a proportion of low-income residents). We calculated total Medicare spending (adjusted for population size, local input prices, and health risk). We assessed clinical quality by preventable hospital admissions, hospital readmissions, and emergency department visits. We sorted HRRs by health center penetration rate and compared spending and quality measures between the high- and low-penetration deciles. We also employed linear regressions to estimate spending and quality measures as a function of health center penetration. The high-penetration decile had 9.7% lower Medicare spending ($926 per capita, p=0.01) than the low-penetration decile, and no different clinical quality outcomes. Compared with elderly fee-for-service beneficiaries residing in areas with low-penetration of health center patients among low-income residents, those residing in high-penetration areas may accrue Medicare cost savings. Limited evidence suggests that these savings do not compromise clinical quality.

Study liquid length penetration results obtained with a direct acting piezo electric injector

International Nuclear Information System (INIS)

Payri, Raul; Gimeno, Jaime; Bardi, Michele; Plazas, Alejandro H.

2013-01-01

Highlights: ► A direct acting injector capable of controlling needle lift has been used to determine liquid phase penetration. ► The influence of injection pressure, chamber density and chamber temperature have been measured. ► When needle lift is reduced the stabilized liquid length is shortened. ► The relationship between needle lift and liquid length makes needle lift as a new way to control the injection event. - Abstract: A state of the art prototype common rail injector featuring direct control of the needle by means of a piezo stack (direct acting) has been tested. Liquid phase penetration of the sprays in diesel engine-like conditions has been studied via imaging technique in a novel continuous flow test chamber that allows an accurate control on a wide range of thermodynamic conditions (up to 1000 K and 15 MPa). This state of the art injector fitted with a 7-hole nozzle, allows a fully flexible control on the nozzle needle movement, enabling various fuel injection rate typologies. The temporal evolution of the seven sprays has been studied recording movies of the injection event in evaporative conditions via Mie scattering imaging technique and using a high speed camera. The results showed a strong influence of needle position on the stabilized liquid length while the effect of the injection pressure is negligible: the decrease of the needle lift causes a pressure drop in the needle seat and thus a reduction in the effective pressure upstream of the orifices (in the nozzle sac). According to known literature the stabilized liquid-length depends mainly on effective diameter, spray cone-angle and fuel/air properties and does not depend on fuel velocity at the orifice outlet. Therefore, due to small change in the spray cone-angle, higher injection pressures give slightly lower liquid length. However, partial needle lifts has an opposite effect: when needle is partially lifted a dramatic increase of the spray cone-angle and a consequent reduction of

Initial response of a rock penetrator

International Nuclear Information System (INIS)

Longcope, D.B.; Grady, D.E.

1977-12-01

An analysis based on elastic rod theory is given for the early-time axisymmetric response of pointed penetrators. Results of measurements by laser interferometry of the back surface particle velocity of laboratory scale penetrators impacted by sandstone targets are presented. Values of the initial pressure on the penetrator tip are determined which give good agreement between the analytical and experimental results. These initial tip pressures are found to be approximated by the stress-particle velocity Hugoniot for the target material

Design and intestinal mucus penetration mechanism of core-shell nanocomplex.

Science.gov (United States)

Zhang, Xin; Cheng, Hongbo; Dong, Wei; Zhang, Meixia; Liu, Qiaoyu; Wang, Xiuhua; Guan, Jian; Wu, Haiyang; Mao, Shirui

2018-02-28

The objective of this study was to design intestinal mucus-penetrating core-shell nanocomplex by functionally mimicking the surface of virus, which can be used as the carrier for peroral delivery of macromolecules, and further understand the influence of nanocomplex surface properties on the mucosal permeation capacity. Taking insulin as a model drug, the core was formed by the self-assembly among positively charged chitosan, insulin and negatively charged sodium tripolyphosphate, different types of alginates were used as the shell forming material. The nanocomplex was characterized by dynamic light scattering (DLS), atomic force microscopy (AFM) and FTIR. Nanocomplex movement in mucus was recorded using multiple particle tracking (MPT) method. Permeation and uptake of different nanocomplex were studied in rat intestine. It was demonstrated that alginate coating layer was successfully formed on the core and the core-shell nanocomplex showed a good physical stability and improved enzymatic degradation protection. The mucus penetration and MPT study showed that the mucus penetration capacity of the nanocomplex was surface charge and coating polymer structure dependent, nanocomplex with negative alginate coating had 1.6-2.5 times higher mucus penetration ability than that of positively charged chitosan-insulin nanocomplex. Moreover, the mucus penetration ability of the core-shell nanocomplex was alginate structure dependent, whereas alginate with lower G content and lower molecular weight showed the best permeation enhancing ability. The improvement of intestine permeation and intestinal villi uptake of the core-shell nanocomplex were further confirmed in rat intestine and multiple uptake mechanisms were involved in the transport process. In conclusion, core-shell nanocomplex composed of oppositely charged materials could provide a strategy to overcome the mucus barrier and enhance the mucosal permeability. Copyright © 2018 Elsevier B.V. All rights reserved.

High-resolution mapping, modeling, and evolution of subsurface geomorphology using ground-penetrating radar techniques

Digital Repository Service at National Institute of Oceanography (India)

Loveson, V.J.; Gujar, A.R.

subsurface. It has been useful to decipher shallow geomorphic structures having various options to use different antennas for different depth penetration (0-30 m) with higher resolution.   7.2 Principles of GPR  Ground Penetrating Radar (GPR) was invented... about 90m. Flat and plain land is being used, at present, for agriculture (paddy cultivation) practice. Sand dunes are low lying and highly reworked due to social forestry plantation (acacia) activities. 13    7.8.6 Paleo­Lagoon  GPR data shows two...

Effect of cowpea aphid-borne mosaic virus on penetration and reproduction of meloidogyne incognita in cowpea

OpenAIRE

Adekunle O.K.; Owa T.E.

2008-01-01

greenhouse studies were conducted to investigate the effects of cowpea aphid-borne mosaic virus on penetration and reproduction of Meloidogyne incognita in cowpea and the influence of these pathogens on the yield of cowpea. The interaction of both pathogens resulted in higher population density of the nematode at harvest and correspondingly reduced grain yield in comparison to inoculation of either pathogen alone or un-inoculated control. An almost equal number of nematode juveniles penetrate...

Correlation of the sperm penetration assay (SPA and miscarriage after assisted reproduction: The potential use of spa as a new criterion for preimplantation genetic diagnosis

Directory of Open Access Journals (Sweden)

Gradistanac Jelena

2011-01-01

Full Text Available We analyzed 93 couples undergoing male screening with the Sperm Penetration Assay (SPA before in vitro fertilization and intracytoplasmic sperm injection (ICSI, to determine the accuracy of SPA for subsequent embryonic development, incidence of pregnancy and miscarriage rates (SAB. ICSI patients with the lowest SPA scores had significantly higher incidences of Sthan did patients in the other SPA groups. Sperm quality is higher with better SPA scores. Poor sperm quality has increased incidence of chromosomal abnormalities and is associated with early fetal loss. Couples with negative SPA are candidates for preimplantation genetic diagnosis, to reduce the incidence of SAB.

Real-Time Penetrating Particle Analyzer (PAN)

Science.gov (United States)

Wu, X.; Ambrosi, G.; Bertucci, B.

2018-02-01

The PAN can measure penetrating particles with great precision to study energetic particles, solar activities, and the origin and propagation of cosmic rays. The real-time monitoring of penetrating particles is crucial for deep space human travel.

Descemet Stripping Automated Endothelial Keratoplasty for Failed Penetrating Keratoplasty: Influence of the Graft-Host Junction on the Graft Survival Rate.

Science.gov (United States)

Omoto, Takashi; Sakisaka, Toshihiro; Toyono, Tetsuya; Yoshida, Junko; Shirakawa, Rika; Miyai, Takashi; Yamagami, Satoru; Usui, Tomohiko

2018-04-01

To investigate the clinical results of Descemet stripping automated endothelial keratoplasty (DSAEK) for failed penetrating keratoplasty (PK) and the influence of the graft-host junction (GHJ) on the graft survival rate. Data were retrospectively collected on patient demographics, visual outcomes, complications, and graft survival rate for 17 eyes of 16 patients who underwent DSAEK for failed PK. The graft survival rate was compared between the eyes when divided into a bump group and a well-aligned group according to the shape of the GHJ detected on anterior segment optical coherence tomography. The most common indication for initial PK was bullous keratopathy after glaucoma surgery (35.3%). Seven eyes (41.2%) were classified into the bump group and 10 eyes (58.8%) into the well-aligned group. The mean best-ever documented visual acuity (BDVA) after DSAEK was 0.33 logMAR. Postoperatively, almost 70% of eyes achieved a BDVA that was within 0.2 logMAR of their preoperative BDVA. Graft detachment occurred in 29.4% of eyes and primary graft failure in 17.6%. All primary failures occurred in the bump group. The cumulative graft survival rate was 82.3% at 1 year, 73.2% at 2 years, and 58.6% at 3 years. Graft failure was more likely in eyes in the bump group than in those in the well-aligned group (P = 0.037, Wilcoxon test). DSAEK for failed PK had a favorable outcome in this study. However, the GHJ should be assessed carefully before performing the procedure.

Market penetration analysis of fuel cell vehicles in Japan by using the energy system model MARKAL

International Nuclear Information System (INIS)

Endo, Eiichi

2007-01-01

The objective of the present work is to validate the hydrogen energy roadmap of Japan by analyzing the market penetration of fuel cell vehicles (FCVs) and the effects of a carbon tax using an energy system model of Japan based on MARKAL. The results of the analysis show that a hydrogen FCV would not be cost competitive until 2050 without a more severe carbon tax than the government's planned 2400 JPY/t-C carbon tax. However, as the carbon tax rate increases, instead of conventional vehicles including the gasoline hybrid electric vehicle, hydrogen FCVs gain market penetration earlier and more. By assuming a more severe carbon tax rate, such as 10 000 JPY/t-C, the market share of hydrogen FCVs approaches the governmental goal. This suggests that cheaper vehicle cost and hydrogen cost than those targeted in the roadmap should be attained or subsidies to hydrogen FCV and hydrogen refueling station will be necessary for achieving the goal of earlier market penetration. (author)

Novel surgical procedures in glaucoma: advances in penetrating glaucoma surgery.

Science.gov (United States)

Filippopoulos, Theodoros; Rhee, Douglas J

2008-03-01

Despite late modifications and enhancements, traditional penetrating glaucoma surgery is not without complications and is reserved for patients in whom pharmacologic treatment and/or laser trabeculoplasty do not suffice to control the intraocular pressure. This article critically reviews recent advances in penetrating glaucoma surgery with particular attention paid to two novel surgical approaches: ab interno trabeculectomy with the Trabectome and implantation of the Ex-PRESS shunt. Ab interno trabeculectomy (Trabectome) achieves a sustained 30% reduction in intraocular pressure by focally ablating and cauterizing the trabecular meshwork/inner wall of Schlemm's canal. It has a remarkable safety profile with respect to early hypotonous or infectious complications as it does not generate a bleb, but it can be associated with early postoperative intraocular pressure spikes that may necessitate additional glaucoma surgery. The Ex-PRESS shunt is more commonly implanted under a partial thickness scleral flap, and appears to have similar efficacy to standard trabeculectomy offering some advantages with respect to the rate of early complications related to hypotony. Penetrating glaucoma surgery will continue to evolve. As prospective randomized clinical trials become available, we will determine the exact role of these surgical techniques in the glaucoma surgical armamentarium.

Leak preventing method and device for penetration portion in reactor container

International Nuclear Information System (INIS)

Sato, Mitsuyoshi.

1995-01-01

A pressurized air is sent to a leak path caused in an electric wire penetration portion on the side of a reactor container to keep the pressure thereof higher than that at the inside of the reactor container, or aerosol is injected to close the leak path. Alternatively, a cooling tube is disposed for cooling a sleeve, or a resin charging device is disposed for injecting a thermosetting resin to close the leak path, and an external power operated compressor is disposed for sending a pressurized air to the resin charging device. Then, pressure is applied in the opposite direction from a pressurizing port so as to provide a higher pressure than the inside of the reactor container by the compressor upon occurrence of an accident. In addition, the sleeve is cooled so as to suppress the less leak path in the wire penetration portion. Further, the leak path is closed by the aerosol or the thermosetting resin, which is quite effective also in view of improvement of the reliability of the reactor container. (N.H.)

Development of penetrant materials from used oil

International Nuclear Information System (INIS)

Mohamad Pauzi Ismail; Azhar Azmi

2014-01-01

This paper described the results of experiment to produce penetrant for nondestructive testing using used engine oil. The used engine oil was obtained from motor vehicle. It was mixed with kerosene at several mix proportion. The penetrability of these mixing were measured and compared with the penetrant available on the market. The results of measurement were explained and discussed. (author)

MARS14 deep-penetration calculation for the ISIS target station shielding

International Nuclear Information System (INIS)

Nakao, Noriaki; Nunomiya, Tomoya; Iwase, Hiroshi; Nakamura, Takashi

2004-01-01

The calculation of neutron penetration through a thick shield was performed with a three-dimensional multi-layer technique using the MARS14(02) Monte Carlo code to compare with the experimental shielding data in 1998 at the ISIS spallation neutron source facility of Rutherford Appleton Laboratory. In this calculation, secondary particles from a tantalum target bombarded by 800-MeV protons were transmitted through a bulk shield of approximately 3-m-thick iron and 1-m-thick concrete. To accomplish this deep-penetration calculation, a three-dimensional multi-layer technique and energy cut-off method were used considering a spatial statistical balance. Finally, the energy spectra of neutrons behind the very thick shield could be calculated down to the thermal energy with good statistics, and the calculated results typically agree well within a factor of two with the experimental data over a broad energy range. The 12 C(n,2n) 11 C reaction rates behind the bulk shield were also calculated, which agree with the experimental data typically within 60%. These results are quite impressive in calculation accuracy for deep-penetration problem

The value-based medicine comparative effectiveness and cost-effectiveness of penetrating keratoplasty for keratoconus.

Science.gov (United States)

Roe, Richard H; Lass, Jonathan H; Brown, Gary C; Brown, Melissa M

2008-10-01

To perform a base case, comparative effectiveness, and cost-effectiveness (cost-utility) analysis of penetrating keratoplasty for patients with severe keratoconus. Visual acuity data were obtained from a large, retrospective multicenter study in which patients with keratoconus with less than 20/40 best corrected visual acuity and/or the inability to wear contact lenses underwent penetrating keratoplasty, with an average follow-up of 2.1 years. The results were combined with other retrospective studies investigating complication rates of penetrating keratoplasty. The data were then incorporated into a cost-utility model using patient preference-based, time trade-off utilities, computer-based decision analysis, and a net present value model to account for the time value of outcomes and money. The comparative effectiveness of the intervention is expressed in quality-of-life gain and QALYs (quality-adjusted life-years), and the cost-effectiveness results are expressed in the outcome of $/QALY (dollars spent per QALY). Penetrating keratoplasty in 1 eye for patients with severe keratoconus results in a comparative effectiveness (value gain) of 16.5% improvement in quality of life every day over the 44-year life expectancy of the average patient with severe keratoconus. Discounting the total value gain of 5.36 QALYs at a 3% annual discount rate yields 3.05 QALYs gained. The incremental cost for penetrating keratoplasty, including all complications, is $5934 ($5913 discounted at 3% per year). Thus, the incremental cost-utility (discounted at 3% annually) for this intervention is $5913/3.05 QALYs = $1942/QALY. If both eyes undergo corneal transplant, the total discounted value gain is 30% and the overall cost-utility is $2003. Surgery on the second eye confers a total discounted value gain of 2.5 QALYs, yielding a quality-of-life gain of 11.6% and a discounted cost-utility of $2238/QALY. Penetrating keratoplasty for patients with severe keratoconus seems to be a

Development of coring, consolidating, subterrene penetrators

International Nuclear Information System (INIS)

Murphy, H.D.; Neudecker, J.W.; Cort, G.E.; Turner, W.C.; McFarland, R.D.; Griggs, J.E.

1976-02-01

Coring penetrators offer two advantages over full face-melting penetrators, i.e., formation of larger boreholes with no increase in power and the production of glass-lined, structurally undisturbed cores which can be recovered with conventional core-retrieval systems. These cores are of significant value in geological exploratory drilling programs. The initial design details and fabrication features of a 114-mm-diam coring penetrator are discussed; significant factors for design optimization are also presented. Results of laboratory testing are reported and compared with performance predictions, and an initial field trial is described

Two methodologies for physical penetration testing using social engineering

NARCIS (Netherlands)

Dimkov, T.; van Cleeff, A.; Pieters, Wolter; Hartel, Pieter H.

2010-01-01

Penetration tests on IT systems are sometimes coupled with physical penetration tests and social engineering. In physical penetration tests where social engineering is allowed, the penetration tester directly interacts with the employees. These interactions are usually based on deception and if not

Managed care market share and cesarean section rates in the United States: is there a link?

Science.gov (United States)

Hueston, W J; Sutton, A

2000-11-01

After peaking during the early 1980s, cesarean section rates in the United States have been falling for the last decade. At the same time, managed care enrollment has increased dramatically. This study examines whether managed care penetration in local markets is associated with lower cesarean section rates in those geographic area. A cross-sectional comparison of cesarean section rates and health maintenance organization (HMO) market penetration in 61 selected metropolitan areas in the United States was conducted. National birth certificate data for 1996 were used to calculate crude and race-adjusted cesarean section rates for residents in each area. No relationship between overall cesarean section rates in the metropolitan areas and managed care penetration was observed. Subanalyses of racial groups demonstrated the existence of a weak association between managed care penetration and cesarean section rates for white women (21.2% for the highest quartile of HMO penetration, compared with 19.1% for the lowest quartile; P = .03), but not for African-Americans or other minorities. Managed care penetration in a market may have an association with cesarean section rates for white women, but the strength of this relationship is small. Even if managed care delivery systems reduce cesarean section rates in their own populations, this change is likely to have only a small impact on overall cesarean rates. HMO penetration is unlikely to influence national cesarean section rates, nor does it appear to explain state variations in these rates.

Assessing the credibility of diverting through containment penetrations

International Nuclear Information System (INIS)

Cooley, J.N.; Swindle, D.W. Jr.

1980-01-01

A viable approach has been developed for identifying those containment penetrations in a nuclear fuel reprocessing plant which are credible diversion routes. The approach is based upon systematic engineering and design analyses and is applied to each type of penetration to determine which penetrations could be utilized to divert nuclear material from a reprocessing facility. The approach is described and the results of an application are discussed. In addition, the concept of credibility is developed and discussed. For a typical reprocessing plant design, the number of penetrations determined to be credible without process or piping modifications was approx. 16% of the penetrations originally identified

Quasi-relativistic effects in barrier-penetration processes

International Nuclear Information System (INIS)

Anchishkin, D.V.

1991-01-01

The problem of a particle tunneling through the potential barrier is solved within quasi-relativistic Schroedinger equation. It is shown that the subbarrier relativistic effects give a significant addition to penetration coefficient when some relations between parameters of the barrier and mass of a tunneling particle are satisfied. For instance an account of these effects for penetration of low energy π + -mesons through Coulomb barrier of the 298 U nuclei would give the increasing of penetration coefficient to 30 percent as compared to the nonrelativistic one. Also we give the criteria under which the contribution of the ''under barrier relativism'' to penetration coefficient becomes essential. 3 refs.; 6 figs. (author)

Variable penetration of primary angioplasty in Europe--what determines the implementation rate?

Science.gov (United States)

Kristensen, Steen D; Laut, Kristina G; Kaifoszova, Zuzana; Widimsky, Petr

2012-08-01

Primary percutaneous coronary intervention (PPCI) is the recommended treatment for patients with acute ST-segment elevation myocardial infarction (STEMI). A survey conducted in 2008 in the European Society of Cardiology (ESC) countries reported that the annual incidence of hospital admissions for acute STEMI is around 800 patients per million inhabitants. The survey also showed that STEMI patients' access to reperfusion therapy and the use of PPCI or thrombolytic therapy (TT) vary considerably among countries. Northern, Western and Central Europe already had well-developed PPCI services, offering PPCI to 60-90% of all STEMI patients. Southern Europe and the Balkans were still predominantly using TT and had a higher proportion of patients who were left without any reperfusion treatment. The survey concluded that a nationwide PPCI strategy results in more patients being offered reperfusion therapy. To address the inequalities in STEMI patients' access to life-saving PPCI and to support the implementation of the ESC STEMI treatment guidelines in Europe, the Stent for Life (SFL) Initiative was launched jointly by the European Association of Percutaneous Cardiovascular Interventions (EAPCI) and EuroPCR in 2008. The aim of the SFL Initiative is to improve the delivery of life-saving PPCI for STEMI patients. Currently, 10 national cardiac societies support the SFL Initiative in their respective countries. SFL national action programmes have been developed and are being implemented in several countries. The formation of regional PPCI networks involving emergency medical services, non-PPCI hospitals and PPCI centres is considered to be a critical factor in implementing PPCI services effectively. Better monitoring of STEMI incidence and prospective registration of PPCI in all countries is required to document improvements in health care and to identify areas where further effort is required. Furthermore, studies on potential factors or characteristics that explain the

Thyroid Emphysema Following Penetrating Neck Trauma

Directory of Open Access Journals (Sweden)

Demet Karadağ

2011-03-01

Full Text Available Although traumatic thyroid gland rupture or hemorrhage is usually seen in goitrous glands, injuries of the normal thyroid gland after neck trauma have rarely been described in the literature. We describe a 44-year-old man who presented with thyroid emphysema and subcutaneous emphysema (SCE that occurred after penetrating neck trauma. CT images showed complete resolution of thyroid emphysema and subcutaneous emphysema at follow-up examination. Neck injuries can be life threatening. After penetrating neck traumas, physicians should consider subtle esophageal or tracheal laceration. Thyroid emphysema can occur as the result of penetrating neck trauma. The mechanism of emphysema of the thyroid parenchyma can be explained by the thyroid gland’s presence in a single visceral compartment that encompasses the larynx, trachea and thyroid gland. We describe an unusual case of thyroid emphysema of a normal thyroid gland following a penetrating neck injury.

In-vivo dynamic characterization of microneedle skin penetration using optical coherence tomography

Science.gov (United States)

Enfield, Joey; O'Connell, Marie-Louise; Lawlor, Kate; Jonathan, Enock; O'Mahony, Conor; Leahy, Martin

2010-07-01

The use of microneedles as a method of circumventing the barrier properties of the stratum corneum is receiving much attention. Although skin disruption technologies and subsequent transdermal diffusion rates are being extensively studied, no accurate data on depth and closure kinetics of microneedle-induced skin pores are available, primarily due to the cumbersome techniques currently required for skin analysis. We report on the first use of optical coherence tomography technology to image microneedle penetration in real time and in vivo. We show that optical coherence tomography (OCT) can be used to painlessly measure stratum corneum and epidermis thickness, as well as microneedle penetration depth after microneedle insertion. Since OCT is a real-time, in-vivo, nondestructive technique, we also analyze skin healing characteristics and present quantitative data on micropore closure rate. Two locations (the volar forearm and dorsal aspect of the fingertip) have been assessed as suitable candidates for microneedle administration. The results illustrate the applicability of OCT analysis as a tool for microneedle-related skin characterization.

Penetration of Photovoltaics in Greece

OpenAIRE

Eugenia Giannini; Antonia Moropoulou; Zacharias Maroulis; Glykeria Siouti

2015-01-01

Recently, an interesting experiment was completed in Greece concerning photovoltaic penetration into the electricity production sector. Based on the relevant laws and in accordance to the related European directives, an explosive penetration process was completed in less than three years, resulting in a 7% share of photovoltaics in electricity production instead of the previous negligible share. The legislation was based on licensing simplification and generous feed-in-tariffs. This approach ...

Recursive Monte Carlo method for deep-penetration problems

International Nuclear Information System (INIS)

Goldstein, M.; Greenspan, E.

1980-01-01

The Recursive Monte Carlo (RMC) method developed for estimating importance function distributions in deep-penetration problems is described. Unique features of the method, including the ability to infer the importance function distribution pertaining to many detectors from, essentially, a single M.C. run and the ability to use the history tape created for a representative region to calculate the importance function in identical regions, are illustrated. The RMC method is applied to the solution of two realistic deep-penetration problems - a concrete shield problem and a Tokamak major penetration problem. It is found that the RMC method can provide the importance function distributions, required for importance sampling, with accuracy that is suitable for an efficient solution of the deep-penetration problems considered. The use of the RMC method improved, by one to three orders of magnitude, the solution efficiency of the two deep-penetration problems considered: a concrete shield problem and a Tokamak major penetration problem. 8 figures, 4 tables

penetrating abdominal trauma

African Journals Online (AJOL)

gender, mechanism of injury, injury severity scores (ISS), penetrating ... ileus, reduced pulmonary function and loss of muscle mass and function, all of .... pathophysiology and rehabilitation. ... quality of life after surgery for colorectal cancer.

Radio frequency absorption and penetration depth limits in whole body MR imaging

International Nuclear Information System (INIS)

Roschmann, P.

1986-01-01

There is a continual debate over the ultimate limits to MR imaging at higher field strengths owing to the problems of increasing radio frequency (RF) power deposition and decreasing depth of B/sub 1/ field penetration in the patient. The authors present experimental results of RF absorption and penetration studies in humans for frequencies (f) of 30 to 220 MHz. Results were mostly derived from RF measurements of the effects of loading different types of head, body, and surface coils during imaging of volunteers and metal phantoms. Imaging at 2 T (85 MHz) does not exhibit significant RF problems; the local SAR amounts to 0.06 W/kg for a π-pulse of 1 msec and a TR of 1 sec. RF measurements of coil loading yield SAR -- f/sup 2.2/. The derived effective penetration depth drops from 17 cm at 85 MHz to 7 cm at 220 MHz. Head imaging appears possible up to 220 MHz (5 T). Body and surface coil imaging is subjected to increasing limitations in size or depth above 100 MHz

Study for the water penetration chemistry of bentonite under temperature gradation environment

International Nuclear Information System (INIS)

Hara, Naohiro; Imakita, Tsuyoshi

2003-02-01

This work have been studied for the water fluctuation in time and space in case of the ground water penetration into the unsaturated bentonite with development of the necessary test equipment. The test equipment necessary for this test, was designed on consideration of the adiabatic condition, sensors for pH, salt and water measurement. The thickness of the bentonite specimen was set to 10 cm and the temperature slope was enable to set between 80degC and 100degC at the both end of the specimen. The water for penetration was pushed by gas constant pressure up to 1 MPa. The glass electrode for pH, electric conductivity for salinity and moisture sensor for lower water content and water sensor for higher were used as the sensors. The fluctuation of salt and water in the ground water penetration test to bentonite was estimated. The sensor data were treated as parametric data, because those data could not calibrated in those high temperature and under those high bentonite swollen pressure. For another development should be needed for water sensor. (author)

Hard rock star : Weatherford's multiphase performance drilling system increases penetration rates in hard, abrasive formations

Energy Technology Data Exchange (ETDEWEB)

Smith, M.

2010-12-15

This article described Weatherford's Multiphase Performance Drilling (MPPD) system that enhances drilling rate penetration. The technology was awarded the 2010 winner for best drilling technology for a company with 100 employees or more. Weatherford Canada and Suncor Energy developed the patent-pending MPPD system in the Panther field, and have expanded its use to Suncor's Kelly Lake and Gwillim plays in British Columbia. The new technology is ready to be launched worldwide. This article discussed the MPPD system, with particular reference to its benefits; process; cost savings; and technology utilization. The technique is ideal for drilling in harsh, abrasive formations such as the Nikanassin or Cadomin. It has allowed Suncor to save as much as $1.5 million per well. The article also noted that the key to the process is the controlled use of nitrogen to lighten mud weight. Weatherford used its model 7000 rotating control device to provide precise control of the wellbore pressure profile. It was concluded that Weatherford had significant praise for its partner in developing the MPPD system since its inception with Suncor in 2004, particularly since few client companies have the patience and the willingness to make expensive long-term investment necessary to perfect such systems. 2 figs.

Characterization of nuclear reactor containment penetrations. Preliminary report

International Nuclear Information System (INIS)

Bump, T.R.; Seidensticker, R.W.; Shackelford, M.A.; Gambhir, V.K.; McLennan, G.L.

1984-06-01

This report summarizes the survey work conducted by Argonne National Laboratory on the design and details of major penetrations in 22 nuclear power plants. The survey includes all containment types and materials in current use. It also includes details of all types of penetrations (except for electrical penetration assemblies and valves) and the seals and gaskets used in them. The report provides a test matrix for testing major penetrations and for testing seals and gaskets in order to evaluate their leakage potential under severe accident conditions

Mobile Phone Penetration, Mobile Banking and Inclusive Development in Africa

OpenAIRE

Asongu, Simplice; Nwachukwu, Jacinta C.

2016-01-01

The study assesses the role of mobile phones and mobile banking in decreasing inequality in 52 African countries. The empirical procedure involves first, examining the income-redistributive effect of mobile phone penetration and then investigating the contribution of mobile banking services in this relationship. The findings suggest an equalizing income-redistributive effect of ‘mobile phone penetration’ and ‘mobile banking’, with a higher income-equalizing effect from mobile banking compared...

Study on mixed convective flow penetration into subassembly from reactor hot plenum in FBRs

Energy Technology Data Exchange (ETDEWEB)

Kobayashi, J.; Ohshima, H.; Kamide, H.; Ieda, Y. [Power Reactor and Nuclear Fuel Development Corporation, Ibaraki (Japan)

1995-09-01

Fundamental experiments using water were carried out in order to reveal the phenomenon of mixed convective flow penetration into subassemblies from a reactor`s upper plenum of fast breeder reactors. This phenomenon appears under a certain natural circulation conditions during the operation of the direct reactor auxiliary cooling system for decay heat removal and might influence the natural circulation head which determines the core flow rate and therefore affects the core coolability. In the experiment, a simplified model which simulates an upper plenum and a subassembly was used and the ultrasonic velocity profile monitor as well as thermocouples were applied for the simultaneous measurement of velocity and temperature distributions in the subassembly. From the measured data, empirical equations related to the penetration flow onset condition and the penetration depth were obtained using relevant parameters which were derived from dimensional analysis.

A medium energy neutron deep penetration experiment

International Nuclear Information System (INIS)

Amian, W.; Cloth, P.; Druecke, V.; Filges, D.; Paul, N.; Schaal, H.

1986-11-01

A deep penetration experiment conducted at the Los Alamos WNR facility's Spallation Neutron Target is compared with calculations using intra-nuclear-cascade and S N -transport codes installed at KFA-IRE. In the experiment medium energy reactions induced by neutrons between 15 MeV and about 150 MeV inside a quasi infinite slab of iron have been measured using copper foil monitors. Details of the experimental procedure and the theoretical methods are described. A comparison of absolute reaction rates for both experimentally and theoretically derived reactions is given. The present knowledge of the corresponding monitor reaction cross sections is discussed. (orig.)

40 CFR 1065.365 - Nonmethane cutter penetration fractions.

Science.gov (United States)

2010-07-01

... fractions. 1065.365 Section 1065.365 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... Measurements § 1065.365 Nonmethane cutter penetration fractions. (a) Scope and frequency. If you use a FID... penetration fractions of methane, PFCH4, and ethane, PF C2H6. As detailed in this section, these penetration...

The penetration of aerosols through fine orifices

International Nuclear Information System (INIS)

Marshall, I.A.; Latham, L.J.; Ball, M.H.E.; Mitchell, J.P.

1991-07-01

A novel experimental technique has been extended to study the migration of gas-borne glass microspheres in the size range from about 1 to 15 μm volume equivalent diameter through orifices with bores and thicknesses in the range from 2 to 100 μm and 12.7 to 509 μm respectively. The penetration of these particles was significant with all orifices greater than 10 μm bore at a constant driving pressure of 100 kPa. However, few particles penetrated the 5 μm bore orifice, while virtually no particles penetrated the 2 μm bore orifice. Particle size distributions determined after penetration through the orifices were very similar to that of the upstream aerosol except when significant attenuation occurred. (author)

Temporary fire sealing of penetrations on TFTR

International Nuclear Information System (INIS)

Hondorp, H.L.

1981-02-01

The radiation shielding provided for TFTR for D-D and D-T operation will be penetrated by numerous electrical and mechanical services. Eventually, these penetrations will have to be sealed to provide the required fire resistance, tritium sealability, pressure integrity and radiation attenuation. For the initial hydrogen operation, however, fire sealing of the penetrations in the walls and floor is the primary concern. This report provides a discussion of the required and desirable properties of a temporary seal which can be used to seal these penetrations for the hydrogen operation and then subsequently be removed and replaced as required for the D-D and D-T operations. Several candidate designs are discussed and evaluated and recommendations are made for specific applications

Building virtual pentesting labs for advanced penetration testing

CERN Document Server

Cardwell, Kevin

2014-01-01

Written in an easy-to-follow approach using hands-on examples, this book helps you create virtual environments for advanced penetration testing, enabling you to build a multi-layered architecture to include firewalls, IDS/IPS, web application firewalls, and endpoint protection, which is essential in the penetration testing world. If you are a penetration tester, security consultant, security test engineer, or analyst who wants to practice and perfect penetration testing skills by building virtual pen testing labs in varying industry scenarios, this is the book for you. This book is ideal if yo

Penetration of lycopsamine from a comfrey ointment through human epidermis.

Science.gov (United States)

Jedlinszki, Nikoletta; Balázs, Boglárka; Csányi, Erzsébet; Csupor, Dezső

2017-02-01

Mutagenic and teratogenic pyrrolizidine alkaloids (PAs) have been identified in several plant species. The industrially most important PA-containing plant is Symphytum officinale (common comfrey). The application of its root is restricted in several countries due to its PA content. In medicines, the daily alkaloid quantity and duration of treatment may be limited even in case of topical application. Due to the confirmed good absorption of PAs from the gastrointestinal tract, the prohibition of oral use is justified, however the limitation of external application is not supported by relevant data. Penetration experiments on human skin are not available to be a rational basis for limitation. The aim of our work was to carry out pharmacokinetic studies on the diffusion and penetration of lycopsamine (a main PA of comfrey) from a Symphytum product through a synthetic membrane and human skin. Investigations were carried out on vertical Franz diffusion cell and lycopsamine was quantified by a validated LC-MS method. The amount of lycopsamine diffused through a synthetic membrane varied between 0.11% and 0.72% (within 24 h). On human epidermis, the rate of penetration was lower (0.04-0.22%). Our results may contribute to the more realistic toxicological assessment of externally applied PA-containing products. Copyright © 2016 Elsevier Inc. All rights reserved.

Effects of Sizes and Conformations of Fish-Scale Collagen Peptides on Facial Skin Qualities and Transdermal Penetration Efficiency

OpenAIRE

Chai, Huey-Jine; Li, Jing-Hua; Huang, Han-Ning; Li, Tsung-Lin; Chan, Yi-Lin; Shiau, Chyuan-Yuan; Wu, Chang-Jer

2010-01-01

Fish-scale collagen peptides (FSCPs) were prepared using a given combination of proteases to hydrolyze tilapia (Oreochromis sp.) scales. FSCPs were determined to stimulate fibroblast cells proliferation and procollagen synthesis in a time- and dose-dependent manner. The transdermal penetration capabilities of the fractionationed FSCPs were evaluated using the Franz-type diffusion cell model. The heavier FSCPs, 3500 and 4500?Da, showed higher cumulative penetration capability as opposed to the...

Impact of location on outcome after penetrating colon injuries.

Science.gov (United States)

Sharpe, John P; Magnotti, Louis J; Weinberg, Jordan A; Zarzaur, Ben L; Shahan, Charles P; Parks, Nancy A; Fabian, Timothy C; Croce, Martin A

2012-12-01

Most studies examining suture line failure after penetrating colon injuries have focused on right- versus left-sided injuries. In our institution, operative decisions (resection plus anastomosis vs. diversion) are based on a defined management algorithm regardless of injury location. The purpose of this study was to evaluate the effect of injury location on outcomes after penetrating colon injuries. Consecutive patients with full thickness penetrating colon injuries for 13 years were stratified by age, injury location and mechanism, and severity of shock. According to the algorithm, patients with nondestructive injuries underwent primary repair. Destructive wounds underwent resection plus anastomosis in the absence of comorbidities or large preoperative or intraoperative transfusion requirements (>6 U of packed red blood cells); otherwise, they were diverted. Injury location was defined as ascending, transverse, descending (including splenic flexure), and sigmoid. Multivariable logistic regression was performed to determine whether injury location was an independent predictor of either morbidity or mortality. Four hundred sixty-nine patients were identified: 314 (67%) underwent primary repair and 155 (33%) underwent resection. Most injuries involved the transverse colon (39%), followed by the ascending colon (26%), the descending colon (21%), and the sigmoid colon (14%). Overall, there were 13 suture line failures (3%) and 72 abscesses (15%). Most suture line failures involved injuries to the descending colon (p = 0.06), whereas most abscesses followed injuries to the ascending colon (p = 0.37). Multivariable logistic regression failed to identify injury location as an independent predictor of either morbidity or mortality after adjusting for 24-hour transfusions, base excess, shock index, injury mechanism, and operative management. Injury location did not affect morbidity or mortality after penetrating colon injuries. Nondestructive injuries should be primarily

Penetrating injuries to the duodenum: An analysis of 879 patients from the National Trauma Data Bank, 2010 to 2014.

Science.gov (United States)

Phillips, Bradley; Turco, Lauren; McDonald, Dan; Mause, Alison; Walters, Ryan W

2017-11-01

Despite wide belief that the duodenal Organ Injury Scale has been validated, this has not been reported in the published literature. Based on clinical experience, we hypothesize that the American Association for Surgery of Trauma Organ Injury Scale (AAST-OIS) for duodenal injuries can independently predict mortality. Our objectives were threefold: (1) describe the national profile of penetrating duodenal injuries, (2) identify predictors of morbidity and mortality, and (3) validate the duodenum AAST-OIS as a statistically significant predictor of mortality. Using the Abbreviated Injury Scale 2005 and International Classification of Diseases-9th Rev.-Clinical Modification (ICD-9-CM) E-codes, we identified 879 penetrating duodenal trauma patients from the National Trauma Data Bank between 2010 and 2014. We controlled patient-level covariates of age, biological sex, systolic blood pressure (SBP), Glasgow Coma Scale (GCS) score, pulse, Injury Severity Score (ISS), and Organ Injury Scale (OIS) grade. We estimated multivariable generalized linear mixed models to account for the nesting of patients within trauma centers. Our results indicated an overall mortality rate of 14.4%. Approximately 10% of patients died within 24 hours of admission, of whom 76% died in the first 6 hours. Patients averaged approximately five associated injuries, 45% of which involved the liver and colon. Statistically significant independent predictors of mortality were firearm mechanism, SBP, GCS, pulse, ISS, and AAST-OIS grade. Specifically, odds of death were decreased with 10 mm Hg higher admission SBP (13% decreased odds), one point higher GCS (14.4%), 10-beat lower pulse (8.2%), and 10-point lower ISS (51.0%). This study is the first to report the national profile of penetrating duodenal injuries. Using the National Trauma Data Bank, we identified patterns of injury, predictors of outcome, and validated the AAST-OIS for duodenal injuries as a statistically significant predictor of morbidity

Strain rate effects in nuclear steels at room and higher temperatures

Energy Technology Data Exchange (ETDEWEB)

Solomos, G. E-mail: george.solomos@jrc.it; Albertini, C.; Labibes, K.; Pizzinato, V.; Viaccoz, B

2004-04-01

An investigation of strain rate, temperature and size effects in three nuclear steels has been conducted. The materials are: ferritic steel 20MnMoNi55 (vessel head), austenitic steel X6CrNiNb1810 (upper internal structure), and ferritic steel 26NiCrMo146 (bolting). Smooth cylindrical tensile specimens of three sizes have been tested at strain rates from 0.001 to 300 s{sup -1}, at room and elevated temperatures (400-600 deg. C). Full stress-strain diagrams have been obtained, and additional parameters have been calculated based on them. The results demonstrate a clear influence of temperature, which amounts into reducing substantially mechanical strengths with respect to RT conditions. The effect of strain rate is also shown. It is observed that at RT the strain rate effect causes up shifting of the flow stress curves, whereas at the higher temperatures a mild downshifting of the flow curves is manifested. Size effect tendencies have also been observed. Some implications when assessing the pressure vessel structural integrity under severe accident conditions are considered.

Assessment and outcome of 496 penetrating gastrointestinal warfare injuries.

Science.gov (United States)

Saghafinia, M; Nafissi, N; Motamedi, M R K; Motamedi, M H K; Hashemzade, M; Hayati, Z; Panahi, F

2010-03-01

The abdominal viscera are among the most vulnerable organs of the body to penetrating trauma. Proper management of such trauma in war victims at the first-line hospital where these victims are first seen is of paramount importance. We reviewed medical records of war victims suffering small bowel and colorectal injuries treated at first, second and third-line hospitals during the Iraq-Iran War (1980-88) to assess surgical outcomes. The medical records of 496 Iranian war victims suffering penetrating gastrointestinal (GI) injuries treated at first, second and third-line (tertiary) hospitals, a total of 19 centres, were reviewed. Laparotomy had been performed at the 1st line hospitals for all patients who had an acute abdomen, whose wounds violated the peritoneum or whose abdominal radiographs showed air or shrapnel in the abdominal cavity. Stable patients were transferred from first-line to second-line or from second line to tertiary hospitals postoperatively. The treatments, complications and patient outcomes were documented and analyzed. There were 496 patients; 145, 220 and 131 victims underwent laparotomy for GI injuries at first, second and third-line hospitals respectively. The small intestine and colon respectively were the most prevalent abdominal organs damaged. Those first treated for GI injuries at front-line hospitals (145 victims) had more serious conditions and could not be transferred prior to surgery and presented a higher prevalence of complications and mortality. Overall mortality from GI surgery was 3.6% (18 patients). Eleven patients (7.5%) whose first GI operation was performed at frontline hospitals and 7 patients (3.2%) who underwent their first surgical operation at second-line hospitals died. The most common reason for these deaths was complications relating to the gastrointestinal operation such as anastomotic leak. Six missed injuries were seen at the frontline and one at second line hospitals. There were no deaths at the 3rd line hospitals

A cancer specific cell-penetrating peptide, BR2, for the efficient delivery of an scFv into cancer cells.

Directory of Open Access Journals (Sweden)

Ki Jung Lim

Full Text Available Cell-penetrating peptides (CPPs have proven very effective as intracellular delivery vehicles for various therapeutics. However, there are some concerns about non-specific penetration and cytotoxicity of CPPs for effective cancer treatments. Herein, based on the cell-penetrating motif of an anticancer peptide, buforin IIb, we designed several CPP derivatives with cancer cell specificity. Among the derivatives, a 17-amino acid peptide (BR2 was found to have cancer-specificity without toxicity to normal cells. After specifically targeting cancer cells through interaction with gangliosides, BR2 entered cells via lipid-mediated macropinocytosis. Moreover, BR2 showed higher membrane translocation efficiency than the well-known CPP Tat (49-57. The capability of BR2 as a cancer-specific drug carrier was demonstrated by fusion of BR2 to a single-chain variable fragment (scFv directed toward a mutated K-ras (G12V. BR2-fused scFv induced a higher degree of apoptosis than Tat-fused scFv in K-ras mutated HCT116 cells. These results suggest that the novel cell-penetrating peptide BR2 has great potential as a useful drug delivery carrier with cancer cell specificity.

A cancer specific cell-penetrating peptide, BR2, for the efficient delivery of an scFv into cancer cells.

Science.gov (United States)

Lim, Ki Jung; Sung, Bong Hyun; Shin, Ju Ri; Lee, Young Woong; Kim, Da Jung; Yang, Kyung Seok; Kim, Sun Chang

2013-01-01

Cell-penetrating peptides (CPPs) have proven very effective as intracellular delivery vehicles for various therapeutics. However, there are some concerns about non-specific penetration and cytotoxicity of CPPs for effective cancer treatments. Herein, based on the cell-penetrating motif of an anticancer peptide, buforin IIb, we designed several CPP derivatives with cancer cell specificity. Among the derivatives, a 17-amino acid peptide (BR2) was found to have cancer-specificity without toxicity to normal cells. After specifically targeting cancer cells through interaction with gangliosides, BR2 entered cells via lipid-mediated macropinocytosis. Moreover, BR2 showed higher membrane translocation efficiency than the well-known CPP Tat (49-57). The capability of BR2 as a cancer-specific drug carrier was demonstrated by fusion of BR2 to a single-chain variable fragment (scFv) directed toward a mutated K-ras (G12V). BR2-fused scFv induced a higher degree of apoptosis than Tat-fused scFv in K-ras mutated HCT116 cells. These results suggest that the novel cell-penetrating peptide BR2 has great potential as a useful drug delivery carrier with cancer cell specificity.

Chronic Disease Prevalence and Medicare Advantage Market Penetration

Science.gov (United States)

Bernell, Stephanie Lazarus; Casim, Faizan M.; Wilmott, Jennifer; Pearson, Lindsey; Byler, Caitlin M.; Zhang, Zidong

2015-01-01

By March 2015, 30% of all Medicare beneficiaries were enrolled in Medicare Advantage (MA) plans. Research to date has not explored the impacts of MA market penetration on individual or population health outcomes. The primary objective of this study is to examine the relationships between MA market penetration and the beneficiary’s portfolio of cardiometabolic diagnoses. This study uses 2004 to 2008 Medical Expenditure Panel Survey (MEPS) Household Component data to construct an aggregate index that captures multiple diagnoses in one outcome measure (Chronic Disease Severity Index [CDSI]). The MEPS data for 8089 Medicare beneficiaries are merged with MA market penetration data from Centers for Medicare and Medicaid Services (CMS). Ordinary least squares regressions are run with SAS 9.3 to model the effects of MA market penetration on CDSI. The results suggest that each percentage increase in MA market penetration is associated with a greater than 2-point decline in CDSI (lower burden of cardiometabolic chronic disease). Spill-over effects may be driving improvements in the cardiometabolic health of beneficiary populations in counties with elevated levels of MA market penetration. PMID:28462266

Multi-Period Optimization Model for Electricity Generation Planning Considering Plug-in Hybrid Electric Vehicle Penetration

Directory of Open Access Journals (Sweden)

Lena Ahmadi

2015-05-01

Full Text Available One of the main challenges for widespread penetration of plug-in hybrid electric vehicles (PHEVs is their impact on the electricity grid. The energy sector must anticipate and prepare for this extra demand and implement long-term planning for electricity production. In this paper, the additional electricity demand on the Ontario electricity grid from charging PHEVs is incorporated into an electricity production planning model. A case study pertaining to Ontario energy planning is considered to optimize the value of the cost of the electricity over sixteen years (2014–2030. The objective function consists of the fuel costs, fixed and variable operating and maintenance costs, capital costs for new power plants, and the retrofit costs of existing power plants. Five different case studies are performed with different PHEVs penetration rates, types of new power plants, and CO2 emission constraints. Among all the cases studied, the one requiring the most new capacity, (~8748 MW, is assuming the base case with 6% reduction in CO2 in year 2018 and high PHEV penetration. The next highest one is the base case, plus considering doubled NG prices, PHEV medium penetration rate and no CO2 emissions reduction target with an increase of 34.78% in the total installed capacity in 2030. Furthermore, optimization results indicate that by not utilizing coal power stations the CO2 emissions are the lowest: ~500 tonnes compared to ~900 tonnes when coal is permitted.

Cutaneous Permeation and Penetration of Sunscreens: Formulation Strategies and In Vitro Methods

Directory of Open Access Journals (Sweden)

Silvia Tampucci

2017-12-01

Full Text Available Sunscreens are the most common products used for skin protection against the harmful effects of ultraviolet radiation. However, as frequent application is recommended, the use of large amount of sunscreens could reflect in possible systemic absorption and since these preparations are often applied on large skin areas, even low penetration rates can cause a significant amount of sunscreen to enter the body. An ideal sunscreen should have a high substantivity and should neither penetrate the viable epidermis, the dermis and the systemic circulation, nor in hair follicle. The research of methods to assess the degree of penetration of solar filters into the skin is nowadays even more important than in the past, due to the widespread use of nanomaterials and the new discoveries in cosmetic formulation technology. In the present paper, different in vitro studies, published in the last five years, have been reviewed, in order to focus the attention on the different methodological approaches employed to effectively assess the skin permeation and retention of sunscreens.

Thermo-chemical Ice Penetrator for Icy Moons

Science.gov (United States)

Arenberg, J. W.; Lee, G.; Harpole, G.; Zamel, J.; Sen, B.; Ross, F.; Retherford, K. D.

2016-12-01

The ability to place sensors or to take samples below the ice surface enables a wide variety of potential scientific investigations. Penetrating an ice cap can be accomplished via a mechanical drill, laser drill, kinetic impactor, or heated penetrator. This poster reports on the development of technology for the latter most option, namely a self-heated probe driven by an exothermic chemical reaction: a Thermo-chemical ice penetrator (TChIP). Our penetrator design employs a eutectic mix of alkali metals that produce an exothermic reaction upon contact with an icy surface. This reaction increases once the ice starts melting, so no external power is required. This technology is inspired by a classified Cold-War era program developed at Northrop Grumman for the US Navy. Terrestrial demonstration of this technology took place in the Arctic; however, this device cannot be considered high TRL for application at the icy moons of the solar system due to the environmental differences between Earth's Arctic and the icy moons. These differences demand a TChIP design specific to these cold, low mass, airless worlds. It is expected that this model of TChIP performance will be complex, incorporating all of the forces on the penetrator, gravity, the thermo-chemistry at the interface between penetrator and ice, and multi-phase heat and mass transport, and hydrodynamics. Our initial efforts are aimed at the development of a validated set of tools and simulations to predict the performance of the penetrator for both the environment found on these icy moons and for a terrestrial environment. The purpose of the inclusion of the terrestrial environment is to aid in model validation. Once developed and validated, our models will allow us to design penetrators for a specific scientific application on a specific body. This poster discusses the range of scientific investigations that are enabled by TChIP. We also introduce the development plan to advance TChIP to the point where it can be

Why do younger women have higher breast cancer recurrence rates after breast-conserving surgery?

International Nuclear Information System (INIS)

Nishimura, Reiki; Matsuda, Masakazu; Miyayama, Haruhiko; Okazaki, Shinji; Kai, Chiharu; Ozaki, N.

2003-01-01

Preventing breast cancer recurrence after breast-conserving surgery is an important issue. The main factors contributing to such recurrence are positive margins, absence of radiotherapy and young age. To investigate the clinical significance of age in breast-conserving surgery, we examined the relationship between clinicopathological findings or outcome and age, especially young age. The cases were divided into three groups by age; 35 years old or less, 36-50y.o. and 51y.o. or higher. Between April 1989 and March 2003, 743 patients were treated with breast-conserving surgery. There were 49 patients aged 35 years old or less (6.6%). Younger age significantly correlated with positive surgical margin, lymph node metastases, higher proliferative activity, negative estrogen receptor (ER) or progesterone receptor (PgR), larger tumor size, and shorter nipple-tumor distances. Although younger patients had a higher recurrence rate irrespective of radiotherapy, margin status had an impact on recurrence rate. Thus, the reason young age was a significant factor for breast recurrence after breast-conserving surgery was that young patients frequently had numerous risk factors such as positive margin, higher proliferative activity, positive nodes, negative ER/PgR and larger tumor. However, negative surgical margins could reduce recurrence rates even in young women. These results suggest that more suitable criteria and strategies may be needed for young patients with breast cancer. (author)

Effect of Impact Angle on the Erosion Rate of Coherent Granular Soil, with a Chernozemic Soil as an Example

Science.gov (United States)

Larionov, G. A.; Bushueva, O. G.; Gorobets, A. V.; Dobrovol'skaya, N. G.; Kiryukhina, Z. P.; Krasnov, S. F.; Kobylchenko Kuksina, L. V.; Litvin, L. F.; Sudnitsyn, I. I.

2018-02-01

It has been shown in experiments in a hydraulic flume with a knee-shaped bend that the rate of soil erosion more than doubles at the flow impact angles to the channel side from 0° to 50°. At higher channel bends, the experiment could not be performed because of backwater. Results of erosion by water stream approaching the sample surface at angles between 2° and 90° are reported. It has been found that the maximum erosion rate is observed at flow impact angles of about 45°, and the minimum rate at 90°. The minimum soil erosion rate is five times lower than the maximum erosion rate. This is due to the difference in the rate of free water penetration into the upper soil layer, and the impact of the hydrodynamic pressure, which is maximum at the impact angle of 90°. The penetration of water into the interaggregate space results in the breaking of bonds between aggregates, which is the main condition for the capture of particles by the flow.

Penetration shielding applications of CYLSEC

International Nuclear Information System (INIS)

Dexheimer, D.T.; Hathaway, J.M.

1985-01-01

Evaluation of penetration and discontinuity shielding is necessary to meet 10CFR20 regulations for ensuring personnel exposures are as low as reasonably achievable (ALARA). Historically, those shielding evaluations have been done to some degree on all projects. However, many early plants used conservative methods due to lack of an economical computer code, resulting in costly penetration shielding programs. With the increased industry interest in cost effectively reducing personnel exposures to meet ALARA regulations and with the development of the CYLSEC gamma transport computer code at Bechtel, a comprehensive effort was initiated to reduce penetration and discontinuity shielding but still provide a prudent degree of protection for plant personnel from radiation streaming. This effort was more comprehensive than previous programs due to advances in shielding analysis technology and increased interest in controlling project costs while maintaining personnel exposures ALARA. Methodology and resulting cost savings are discussed

Will ageing lead to a higher real exchange rate for the Netherlands?

NARCIS (Netherlands)

van Ewijk, C.; Volkerink, M.

2012-01-01

Long term projections for the Netherlands indicate that demand for nontradables—e.g. health care services—will increase relative to supply due to population ageing. If this leads to higher future real exchanges rates this will erode the return of the savings currently made to prepare for ageing.

Will ageing lead to a higher real exchange rate for the Netherlands?

NARCIS (Netherlands)

van Ewijk, C.; Volkerink, M.

2011-01-01

Long-term projections for the Netherlands indicate that demand for nontradables - e.g. health care services - will increase relative to supply due to population ageing. If this leads to higher future real exchanges rates this will erode the return of the savings currently made to prepare for ageing.

Calcium Lactate addition in Bioconcrete: Effect on Compressive strength and Water penetration

Directory of Open Access Journals (Sweden)

Irwan J.M

2016-01-01

Full Text Available This paper presents compressive strength and water penetration of bioconcrete with addition of calcium lactate. Bioconcrete has higher engineering concrete properties and durability compared to normal concrete but the natural production of calcium carbonate is limited to the calcium content in cement. Therefore, additional calcium is added as an additional calcium source to study the influence towards compressive strength and water penetration. The bacteria used in this research are Enterococcus faecalis and Bacillus sp. Calcium lactate was added into concrete mix in concentrations of 0.001mol/l, 0.005mol/l and 0.01mol/l of liquid used. The concentration of bacteria added into the mix is by partial replacement of water used in casting, which are 3% for Enterococcus faecalis and 5% for Bacillus sp. Both compressive strength and water penetration test used cubes of 150mm × 150mm × 150mm. The cubes were tested after 28 days. The result of compressive strength for control is 36 MPa while partial replacement of bacteria yields 38.2 MPa for 3% Enterococcus faecalis and 37.0 MPa for 5% Bacillus sp. Calcium lactate with 0.005 mol/L has the best performance with 42.8 MPa for Enterococcus faecalis and 39.6 MPa for Bacillus sp. Whereas for water penetration, the best concentration of calcium lactate which yielded the lowest water penetration is 0.01 mol/l for both Enterococcus faecalis and Bacillus sp which are 8.7 cm and 8 cm respectively. The addition of calcium lactate into bioconcrete is quite promising for improvement of concrete properties and durability.

Finite element modeling of penetration of rigid cylindrical bar impacting on a clamped circular plate, employing a strain rate dependent flow rate and a Gruneisen equation of state

International Nuclear Information System (INIS)

Tariq, M.; Khan, I.A.

2003-01-01

A time dependent Finite Element simulation of penetration of a rigid cylindrical bar impacting on a copper plate is conducted, to demonstrate how material behavior appears to change when Johnson-Cook plasticity rule is employed along with a Gruneisen, equation of state with cubic shock velocity-particle relationship, and defining pressure both for compressed and expanded materials, as compared to the behavior when only isotropic strain-hardening model is employed. The bar impacts the plate with a velocity of 1000 m/s, and penetrates the plate, a portion of it coming out of the other side. Results are obtained and compared taking both an isotropic strain-hardening model, and a model incorporating Johnson-Cook flow rule along with Gruneisen equation of state. (author)

Development Of The Nuclear Optical Penetration

Science.gov (United States)

Inoue, K.; Koike, K.; Imada, Y.

1984-10-01

We have developed the nuclear optical penetration to be incorporated in the wall penetration of the shell to introduce a data transmission system using optical fibers into a nuclear power plant with a pressurized water reactor. Radiation-induced coloration in optical glass seriously affects transmission characteristics of optical fibers, whereas it has been revealed that the pure-silica core optical fiber without any dopant in the core has wide applicability in radiation fields thanks to its very low radiation-induced attenuation. The wall penetration of the shell should have airtightness and resistivity to heat, vibration, and pressure, let alone radiation, excellent enough to be invariable in data transmission efficiency even when subjected to severe environmental tests. The sealing modules of this newly developed nuclear optical penetration are hermetically sealed. The gap between the optical fiber rod (100 pm in core diameter and 5 mm in rod diameter) and stainless steel tube is sealed with lamingted glass layer. As the result of He gas leakage test, high airtightness of less than 10 cc/sec was achieved. No thermal deformation of the core was caused by sealing with laminated glass layer, nor was observed transmission loss. Then the sealiing modules were subjected to the irradiation test using 60 Co gamma ray exposure of 2 x 10 rads. Though silica glass layer supporting the fiber rod and sealing glass portion turned blackish purple, transparency of the fiber was not affected. Only less than 0.5 dB of connecting loss was observed at the connecting point with the optical fiber cable. The sealing modules were also found to have resistivity to vibration and pressure as excellent as that of existing nuclear electric penetrations. We expect the nuclear optical fiber penetration will be much effective in improving reliability of data transmission systems using optical fibers in radiation fields.

Theory of activated penetrant diffusion in viscous fluids and colloidal suspensions

International Nuclear Information System (INIS)

Zhang, Rui; Schweizer, Kenneth S.

2015-01-01

We heuristically formulate a microscopic, force level, self-consistent nonlinear Langevin equation theory for activated barrier hopping and non-hydrodynamic diffusion of a hard sphere penetrant in very dense hard sphere fluid matrices. Penetrant dynamics is controlled by a rich competition between force relaxation due to penetrant self-motion and collective matrix structural (alpha) relaxation. In the absence of penetrant-matrix attraction, three activated dynamical regimes are predicted as a function of penetrant-matrix size ratio which are physically distinguished by penetrant jump distance and the nature of matrix motion required to facilitate its hopping. The penetrant diffusion constant decreases the fastest with size ratio for relatively small penetrants where the matrix effectively acts as a vibrating amorphous solid. Increasing penetrant-matrix attraction strength reduces penetrant diffusivity due to physical bonding. For size ratios approaching unity, a distinct dynamical regime emerges associated with strong slaving of penetrant hopping to matrix structural relaxation. A crossover regime at intermediate penetrant-matrix size ratio connects the two limiting behaviors for hard penetrants, but essentially disappears if there are strong attractions with the matrix. Activated penetrant diffusivity decreases strongly with matrix volume fraction in a manner that intensifies as the size ratio increases. We propose and implement a quasi-universal approach for activated diffusion of a rigid atomic/molecular penetrant in a supercooled liquid based on a mapping between the hard sphere system and thermal liquids. Calculations for specific systems agree reasonably well with experiments over a wide range of temperature, covering more than 10 orders of magnitude of variation of the penetrant diffusion constant

Hacking and penetration testing with low power devices

CERN Document Server

Polstra, Philip

2014-01-01

Hacking and Penetration Testing with Low Power Devices shows you how to perform penetration tests using small, low-powered devices that are easily hidden and may be battery-powered. It shows how to use an army of devices, costing less than you might spend on a laptop, from distances of a mile or more. Hacking and Penetration Testing with Low Power Devices shows how to use devices running a version of The Deck, a full-featured penetration testing and forensics Linux distribution, and can run for days or weeks on batteries due to their low power consumption. Author Philip Polstra shows how to

A ten-year study of penetrating injuries of the colon.

Science.gov (United States)

Adesanya, Adedoyin A; Ekanem, Ekanem E

2004-12-01

Colon injury has been associated with a high risk of septic complications and mortality. We prospectively studied the pattern, management, outcome, and prognostic factors in patients who sustained penetrating colon injuries. Sixty patients who presented to our hospital with penetrating colon injuries over a ten-year period (1992 to 2001) were studied. Colon wounds were caused by gunshots in 55 (91.7 percent) patients and knife stabs in 5 (8.3 percent). There was a delay of more than 12 hours before laparotomy in 30 (50 percent) patients. Moderate or major fecal contamination of the peritoneal cavity occurred in 58 (96.7 percent) patients. The average penetrating abdominal trauma index score was 25.9 and 20 (33.3 percent) patients sustained Flint Grade 3 colon injury. Associated intra-abdominal injuries occurred in the small bowel (73.3 percent), liver (25 percent), stomach (23.3 percent), and mesentery (16.7 percent). Right colon wounds (35) were managed by primary repair in 24 (68.6 percent) patients and proximal diverting colostomy in 11 (31.4 percent), whereas left colon wounds (25) were managed by diverting colostomy in 22 (88.0 percent) patients and primary repair in 3 (12.0 percent) patients. Common complications included wound infection (56.7 percent), septicemia (31.7 percent), and enterocutaneous fistula (16.7 percent). The overall mortality rate was 33.3 percent and colon injury-related mortality was 21.7 percent. Presence of destructive colon injury was associated with a greater than fourfold increased incidence of death. Other significant risk factors included shock on admission, major fecal contamination, duration of operation more than four hours, penetrating abdominal trauma index score >25, and more than two postoperative complications. There was no difference in outcome between patients who had primary repair and those undergoing diverting colostomy. Colostomy closure-related morbidity was 21 percent and mortality was 5.3 percent. A more liberal

A theoretical study of cold nuclear fusion using barrier penetration approach

International Nuclear Information System (INIS)

Gupta, S.K.; Gupta, R.K.

1989-06-01

The cold nuclear fusion process is investigated in terms of barrier penetration calculations by considering both the deuteron-molecule and colliding deuteron-deuteron atoms. Atomic collisions with strongly screened interatomic potential and the resonant state formation can bring agreement with present experimental results. Analysis of the data in terms of the reaction rates is also discussed. (author). 13 refs, 1 tab

Skin Penetration Enhancement by Natural Oils for Dihydroquercetin Delivery.

Science.gov (United States)

Čižinauskas, Vytis; Elie, Nicolas; Brunelle, Alain; Briedis, Vitalis

2017-09-12

Natural oils are commonly used in topical pharmaceutical formulations as emulsifiers, stabilizers or solubility enhancers. They are presented as safe and inert components, mainly used for formulation purposes. It is confirmed that natural oils can affect the skin penetration of various substances. Fatty acids are mainly responsible for this effect. Current understanding lacks reliable scientific data on penetration of natural oils into the skin and their skin penetration enhancement potential. In the current study, fatty acid content analysis was used to determine the principal fatty acids in soybean, olive, avocado, sea-buckthorn pulp, raspberry seed and coconut oils. Time of flight secondary ion mass spectrometry bioimaging was used to determine the distribution of these fatty acids in human skin ex vivo after application of the oils. Skin penetration enhancement ratios were determined for a perspective antioxidant compound dihydroquercetin. The results demonstrated skin penetration of fatty acids from all oils tested. Only soybean and olive oils significantly increased the skin distribution of dihydroquercetin and can be used as skin penetration enhancers. However, no correlation can be determined between the fatty acids' composition and skin penetration enhancement using currently available methodological approaches. This indicates that potential chemical penetration enhancement should be evaluated during formulation of topically applied products containing natural oils.

Extreme value statistics for two-dimensional convective penetration in a pre-main sequence star

Science.gov (United States)

Pratt, J.; Baraffe, I.; Goffrey, T.; Constantino, T.; Viallet, M.; Popov, M. V.; Walder, R.; Folini, D.

2017-08-01

Context. In the interior of stars, a convectively unstable zone typically borders a zone that is stable to convection. Convective motions can penetrate the boundary between these zones, creating a layer characterized by intermittent convective mixing, and gradual erosion of the density and temperature stratification. Aims: We examine a penetration layer formed between a central radiative zone and a large convection zone in the deep interior of a young low-mass star. Using the Multidimensional Stellar Implicit Code (MUSIC) to simulate two-dimensional compressible stellar convection in a spherical geometry over long times, we produce statistics that characterize the extent and impact of convective penetration in this layer. Methods: We apply extreme value theory to the maximal extent of convective penetration at any time. We compare statistical results from simulations which treat non-local convection, throughout a large portion of the stellar radius, with simulations designed to treat local convection in a small region surrounding the penetration layer. For each of these situations, we compare simulations of different resolution, which have different velocity magnitudes. We also compare statistical results between simulations that radiate energy at a constant rate to those that allow energy to radiate from the stellar surface according to the local surface temperature. Results: Based on the frequency and depth of penetrating convective structures, we observe two distinct layers that form between the convection zone and the stable radiative zone. We show that the probability density function of the maximal depth of convective penetration at any time corresponds closely in space with the radial position where internal waves are excited. We find that the maximal penetration depth can be modeled by a Weibull distribution with a small shape parameter. Using these results, and building on established scalings for diffusion enhanced by large-scale convective motions, we

Penetration Testing Professional Ethics: a conceptual model and taxonomy

Directory of Open Access Journals (Sweden)

Justin Pierce

2006-05-01

Full Text Available In an environment where commercial software is continually patched to correct security flaws, penetration testing can provide organisations with a realistic assessment of their security posture. Penetration testing uses the same principles as criminal hackers to penetrate corporate networks and thereby verify the presence of software vulnerabilities. Network administrators can use the results of a penetration test to correct flaws and improve overall security. The use of hacking techniques, however, raises several ethical questions that centre on the integrity of the tester to maintain professional distance and uphold the profession. This paper discusses the ethics of penetration testing and presents our conceptual model and revised taxonomy.

Corium Configuration and Penetration Tube Failure for Fukushima Daiichi Nuclear Power Plant

International Nuclear Information System (INIS)

An, Sang Mo; Lee, Jae Bong; Kim, Hwan Yeol; Song, Jin Ho

2016-01-01

For the LWRs (light water reactors), the penetration tubes at the reactor vessel lower head are regarded as the most vulnerable structures along with a global vessel failure during a severe accident because they can be seriously damaged by a corium melt or debris relocated into the lower plenum of the vessel. The research on the penetration tube failure is of higher importance in the BWRs, as it could lead to melt discharge into the containment and subsequent release of radioactive materials to the environment due to the containment failure. There are more than one hundred of penetration tubes in the Fukushima Daiichi NPPs (nuclear power plants), such as ICM-GTs (in-core monitoring guide tubes), CRGTs (control rod guide tubes) and drain tubes. The ICM-GTs include SRMs (source range monitors), IRMs (intermediate range monitors), LPRMs (local power range monitors) and TIPs (traversing in-core probes), which are much thinner than other tubes. The experimental researches to investigate the corium configuration and the penetration tube failure for the Fukushima Daiichi NPPs were introduced and some meaningful results were summarized. It was shown that the corium ingot was separated into two layers, of which the upper layer was metal-rich while the lower one was oxide-rich. It seemed that B 4 C would contribute to reducing the density of the metallic melt. The two-layered configuration will provide useful information to understand the core melt progression and post-recovery actions for the Fukushima Daiichi NPPs. In addition, we performed a large scale penetration tube failure experiment for the SRM/IRM guide tube, and showed high possibilities of large amount of corium discharge out of the reactor vessel lower head, which followed by the tube melting in a very short time. We are planning to perform the penetration tube failure experiments for another dry tube of ICM-GT (LPRM guide tube), and later for the wet tube (CRGT)

Corium Configuration and Penetration Tube Failure for Fukushima Daiichi Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

An, Sang Mo; Lee, Jae Bong; Kim, Hwan Yeol; Song, Jin Ho [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

For the LWRs (light water reactors), the penetration tubes at the reactor vessel lower head are regarded as the most vulnerable structures along with a global vessel failure during a severe accident because they can be seriously damaged by a corium melt or debris relocated into the lower plenum of the vessel. The research on the penetration tube failure is of higher importance in the BWRs, as it could lead to melt discharge into the containment and subsequent release of radioactive materials to the environment due to the containment failure. There are more than one hundred of penetration tubes in the Fukushima Daiichi NPPs (nuclear power plants), such as ICM-GTs (in-core monitoring guide tubes), CRGTs (control rod guide tubes) and drain tubes. The ICM-GTs include SRMs (source range monitors), IRMs (intermediate range monitors), LPRMs (local power range monitors) and TIPs (traversing in-core probes), which are much thinner than other tubes. The experimental researches to investigate the corium configuration and the penetration tube failure for the Fukushima Daiichi NPPs were introduced and some meaningful results were summarized. It was shown that the corium ingot was separated into two layers, of which the upper layer was metal-rich while the lower one was oxide-rich. It seemed that B{sub 4}C would contribute to reducing the density of the metallic melt. The two-layered configuration will provide useful information to understand the core melt progression and post-recovery actions for the Fukushima Daiichi NPPs. In addition, we performed a large scale penetration tube failure experiment for the SRM/IRM guide tube, and showed high possibilities of large amount of corium discharge out of the reactor vessel lower head, which followed by the tube melting in a very short time. We are planning to perform the penetration tube failure experiments for another dry tube of ICM-GT (LPRM guide tube), and later for the wet tube (CRGT)

Chronic Disease Prevalence and Medicare Advantage Market Penetration

Directory of Open Access Journals (Sweden)

Steven W. Howard

2015-10-01

Full Text Available By March 2015, 30% of all Medicare beneficiaries were enrolled in Medicare Advantage (MA plans. Research to date has not explored the impacts of MA market penetration on individual or population health outcomes. The primary objective of this study is to examine the relationships between MA market penetration and the beneficiary’s portfolio of cardiometabolic diagnoses. This study uses 2004 to 2008 Medical Expenditure Panel Survey (MEPS Household Component data to construct an aggregate index that captures multiple diagnoses in one outcome measure (Chronic Disease Severity Index [CDSI]. The MEPS data for 8089 Medicare beneficiaries are merged with MA market penetration data from Centers for Medicare and Medicaid Services (CMS. Ordinary least squares regressions are run with SAS 9.3 to model the effects of MA market penetration on CDSI. The results suggest that each percentage increase in MA market penetration is associated with a greater than 2-point decline in CDSI (lower burden of cardiometabolic chronic disease. Spill-over effects may be driving improvements in the cardiometabolic health of beneficiary populations in counties with elevated levels of MA market penetration.

Radon penetration of concrete slab cracks, joints, pipe penetrations, and sealants

NARCIS (Netherlands)

Nielson, KK; Rogers, VC; Holt, RB; Pugh, TD; Grondzik, WA; deMeijer, RJ

1997-01-01

Radon movement through 12 test slabs with different cracks, pipe penetrations, cold joints, masonry blocks, sealants, and tensile stresses characterized the importance of these anomalous structural domains, Diffusive and advective radon transport were measured with steady-state air pressure

Cracks on instrumentation penetrations in reactor vessel: a new challenge; Fissuration des penetrations de cuve: un nouveau defi

Energy Technology Data Exchange (ETDEWEB)

Anon

2004-02-01

In august 2003 NRC (nuclear regulatory commission) issued a warning concerning the deposits of boron acid that might accumulate on instrumental penetrations in the bottom of PWR vessels. These deposits were first detected on the David-Besse power plant and more recently on the unit 1 of South Texas Project (STP) during a refueling shutdown. STP contracted with the Areva company in order to perform inspections on all the 58 vessel penetrations of the unit 1 and to propose solutions. For that purpose the Areva company had to design a specific visual inspection tool that combined both ultra-sound method and Foucault current probing. The results of the inspection campaign on the unit 1 showed that only 2 penetration tubes were concerned with axial defects in their walls, that no circumferential defects were detected and that butt welds presented no cracks. The 2 incriminated penetration tubes were repaired: a section of both was replaced by an alloy-690 tube. (A.C.)

Penetration Testing dan Analisis Kemanan Web Paud Dikmas

OpenAIRE

Giffari, Abizar

2018-01-01

Sebuah instansi atau perusahaan tentunya mempunyai data penting yang tersimpan dalam sebuah sistem database yang kuat dan aman untuk menghindari ancaman pencurian data dari pihak luar. Untuk mengukur sejauh mana tingkat keamanan yang dibuat, diperlukan sebuah metode pengetesan yang disebut Penetration Testing. Penetration Testing memungkinkan kita untuk dapat menentukan sejauh mana tingkat keamanan sistem yang di test. Penetration Testing juga memungkinkan kita menyerang sistem layaknya attac...

Quantitative penetration testing with item response theory

NARCIS (Netherlands)

Pieters, W.; Arnold, F.; Stoelinga, M.I.A.

2013-01-01

Existing penetration testing approaches assess the vulnerability of a system by determining whether certain attack paths are possible in practice. Therefore, penetration testing has thus far been used as a qualitative research method. To enable quantitative approaches to security risk management,

Potential for containment leak paths through electrical penetration assemblies under severe accident conditions

International Nuclear Information System (INIS)

Sebrell, W.

1983-07-01

The leakage behavior of containments beyond design conditions and knowledge of failure modes is required for evaluation of mitigation strategies for severe accidents, risk studies, emergency preparedness planning, and siting. These studies are directed towards assessing the risk and consequences of severe accidents. An accident sequence analysis conducted on a Boiling Water Reactor (BWR), Mark I (MK I), indicated very high temperatures in the dry-well region, which is the location of the majority of electrical penetration assemblies. Because of the high temperatures, it was postulated in the ORNL study that the sealants would fail and all the electrical penetration assemblies would leak before structural failure would occur. Since other containments had similar electrical penetration assemblies, it was concluded that all containments would experience the same type of failure. The results of this study, however, show that this conclusion does not hold for PWRs because in the worst accident sequence, the long time containment gases stabilize to 350 0 F. BWRs, on the other hand, do experience high dry-well temperatures and have a higher potential for leakage

Effects of Sizes and Conformations of Fish-Scale Collagen Peptides on Facial Skin Qualities and Transdermal Penetration Efficiency

Directory of Open Access Journals (Sweden)

Huey-Jine Chai

2010-01-01

Full Text Available Fish-scale collagen peptides (FSCPs were prepared using a given combination of proteases to hydrolyze tilapia (Oreochromis sp. scales. FSCPs were determined to stimulate fibroblast cells proliferation and procollagen synthesis in a time- and dose-dependent manner. The transdermal penetration capabilities of the fractionationed FSCPs were evaluated using the Franz-type diffusion cell model. The heavier FSCPs, 3500 and 4500 Da, showed higher cumulative penetration capability as opposed to the lighter FSCPs, 2000 and 1300 Da. In addition, the heavier seemed to preserve favorable coiled structures comparing to the lighter that presents mainly as linear under confocal scanning laser microscopy. FSCPs, particularly the heavier, were concluded to efficiently penetrate stratum corneum to epidermis and dermis, activate fibroblasts, and accelerate collagen synthesis. The heavier outweighs the lighter in transdermal penetration likely as a result of preserving the given desired structure feature.

A novel drug delivery gel of terbinafine hydrochloride with high penetration for external use.

Science.gov (United States)

Yang, Yan; Ou, Rujing; Guan, Shixia; Ye, Xiaoling; Hu, Bo; Zhang, Yi; Lu, Shufan; Zhou, Yubin; Yuan, Zhongwen; Zhang, Jun; Li, Qing-Guo

2015-12-01

Terbinafine hydrochloride is an antifungal drug for onychomycosis. Poor permeability of its external preparation leads to poor curative effect. Transfersomes, also known as flexible liposome, could improve transmission of drug for local external use. Terbinafine hydrochloride-loaded liposome is expected to become a breakthrough on the treatment of onychomycosis. This study is aimed to prepare high skin penetration terbinafine hydrochloride transfersomes with high encapsulation efficiency, appropriate drug loading and good stability. Taking entrapment efficiency as the main indicator, the formulations and the processes of preparation were investigated. Transfersomes with different surfactants were prepared in the optimization processes, and the formulations were optimized through the transdermal test in vitro. As a result, a gel contained transfersomes was obtained with a brief evaluation. Its pharmacokinetic properties of going through the skin were studied by using the micro dialysis technology and liquid chromatography-mass spectrometry to assay the penetration behavior of terbinafine. Mean particle size of the terbinafine hydrochloride transfersomes was 69.6 ± 1.23 nm, and the entrapment efficiency was 95.4% ± 0.51. The content of the gel was 4.45 ± 0.15 mg/g. The accumulated permeation of the transfersomes gel in 12 h was 88.52 ± 4.06 µg cm -2 and the intracutaneous drug detention was 94.38 ± 5.26 µg cm -2 . The results of pharmacokinetic studies showed the C max and area under the curve (AUC) were apparently higher than the commercial cream. The terbinafine hydrochloride transfersomes was highly absorbed by the skin. The absorption rate was significantly higher than that of the commercial cream either in the transdermal test in vitro or in the pharmacokinetic studies in vivo.

Penetration of Combustion Aerosol Particles Through Filters of NIOSH-Certified Filtering Facepiece Respirators (FFRs).

Science.gov (United States)

Gao, Shuang; Kim, Jinyong; Yermakov, Michael; Elmashae, Yousef; He, Xinjian; Reponen, Tiina; Grinshpun, Sergey A

2015-01-01

Filtering facepiece respirators (FFRs) are commonly worn by first responders, first receivers, and other exposed groups to protect against exposure to airborne particles, including those originated by combustion. Most of these FFRs are NIOSH-certified (e.g., N95-type) based on the performance testing of their filters against charge-equilibrated aerosol challenges, e.g., NaCl. However, it has not been examined if the filtration data obtained with the NaCl-challenged FFR filters adequately represent the protection against real aerosol hazards such as combustion particles. A filter sample of N95 FFR mounted on a specially designed holder was challenged with NaCl particles and three combustion aerosols generated in a test chamber by burning wood, paper, and plastic. The concentrations upstream (Cup) and downstream (Cdown) of the filter were measured with a TSI P-Trak condensation particle counter and a Grimm Nanocheck particle spectrometer. Penetration was determined as (Cdown/Cup) ×100%. Four test conditions were chosen to represent inhalation flows of 15, 30, 55, and 85 L/min. Results showed that the penetration values of combustion particles were significantly higher than those of the "model" NaCl particles (p combustion particles. Aerosol type, inhalation flow rate and particle size were significant (p combustion particles through R95 and P95 FFR filters (were tested in addition to N95) were not significantly higher than that obtained with NaCl particles. The findings were attributed to several effects, including the degradation of an N95 filter due to hydrophobic organic components generated into the air by combustion. Their interaction with fibers is anticipated to be similar to those involving "oily" particles. The findings of this study suggest that the efficiency of N95 respirator filters obtained with the NaCl aerosol challenge may not accurately predict (and rather overestimate) the filter efficiency against combustion particles.

Evaluating Penetration Ability of Plodia interpunctella (Hübner) (Lepidoptera: Pyralidae) Larvae into Multilayer Polypropylene Packages.

Science.gov (United States)

Scheff, Deanna S; Sehgal, Blossom; Subramanyam, Bhadriraju

2018-04-18

The larvae of the Indian meal moth, Plodia interpunctella (Hübner), can invade or penetrate packaging materials and infest food products. Energy bars with three polypropylene packaging types were challenged with eggs (first instars), third instars, and fifth instars of P. interpunctella to determine package resistance at 28 °C and 65% r.h. The packing types were also challenged with two male and two female pupae of P. interpunctella under similar conditions in order to determine which package provided the greatest protection against larval penetration. Samples infested with eggs, third instars, and pupae were evaluated after 21 days and 42 days to count the number of larvae, pupae, and adults found inside the packages. Packages challenged with fifth instars were observed after 21 days to count the number of larvae, pupae, and adults inside each package. The number and diameter of the holes were determined in each package, followed by the amount of damage sustained to the energy bar. Third and fifth instars showed a higher tendency to penetrate all of the packaging types. First instars showed a reduction in package penetration ability compared with third and fifth instars. The increase in exposure time resulted in an increase in the damage sustained to the energy bars. Among packaging types, the thickest package (Test A) was most resilient to penetration by all of the larval stages. In conclusion, energy bar manufacturers need to invest more effort into improving packaging designs, creating thicker gauge films, or advancing odor barrier technology, in order to prevent penetration and infestation by P. interpunctella larvae.

Evaluating Penetration Ability of Plodia interpunctella (Hübner (Lepidoptera: Pyralidae Larvae into Multilayer Polypropylene Packages

Directory of Open Access Journals (Sweden)

Deanna S. Scheff

2018-04-01

Full Text Available The larvae of the Indian meal moth, Plodia interpunctella (Hübner, can invade or penetrate packaging materials and infest food products. Energy bars with three polypropylene packaging types were challenged with eggs (first instars, third instars, and fifth instars of P. interpunctella to determine package resistance at 28 °C and 65% r.h. The packing types were also challenged with two male and two female pupae of P. interpunctella under similar conditions in order to determine which package provided the greatest protection against larval penetration. Samples infested with eggs, third instars, and pupae were evaluated after 21 days and 42 days to count the number of larvae, pupae, and adults found inside the packages. Packages challenged with fifth instars were observed after 21 days to count the number of larvae, pupae, and adults inside each package. The number and diameter of the holes were determined in each package, followed by the amount of damage sustained to the energy bar. Third and fifth instars showed a higher tendency to penetrate all of the packaging types. First instars showed a reduction in package penetration ability compared with third and fifth instars. The increase in exposure time resulted in an increase in the damage sustained to the energy bars. Among packaging types, the thickest package (Test A was most resilient to penetration by all of the larval stages. In conclusion, energy bar manufacturers need to invest more effort into improving packaging designs, creating thicker gauge films, or advancing odor barrier technology, in order to prevent penetration and infestation by P. interpunctella larvae.

Quantitative Penetration Testing with Item Response Theory

NARCIS (Netherlands)

Arnold, Florian; Pieters, Wolter; Stoelinga, Mariëlle Ida Antoinette

2014-01-01

Existing penetration testing approaches assess the vulnerability of a system by determining whether certain attack paths are possible in practice. Thus, penetration testing has so far been used as a qualitative research method. To enable quantitative approaches to security risk management, including

Quantitative penetration testing with item response theory

NARCIS (Netherlands)

Arnold, Florian; Pieters, Wolter; Stoelinga, Mariëlle

2013-01-01

Existing penetration testing approaches assess the vulnerability of a system by determining whether certain attack paths are possible in practice. Thus, penetration testing has so far been used as a qualitative research method. To enable quantitative approaches to security risk management, including

Chemical Penetration Enhancers for Transdermal Drug Delivery ...

African Journals Online (AJOL)

for transdermal administration. The permeation of drug through skin can be enhanced by both chemical penetration enhancement and physical methods. In this review, we have discussed the chemical penetration enhancement technology for transdermal drug delivery as well as the probable mechanisms of action.

Contribution to the penetration of radionuclides across the skin

International Nuclear Information System (INIS)

Koprda, V.; Harangozo, M.; Kassai, Z.

2000-01-01

hours. The permeation resistance of the skin is proportional to the thickness of the horny layer, the principal barrier mostly restricting the flux of ions. The results showed that the more is the skin stripped, the more enhanced is the penetration of ions. This certifies the fact that stratum corneum represents the most important barrier function of the whole skin (at least in the case of young rats). The results of Co 2+ -ion penetration at different concentrations across the animal models of human skin showed that the permeated amounts of Co 2+ -ions are proportional to its concentration in donor solutions, whereby permeated fractions are higher at lower concentrations. Comparing amounts of penetrated ions through the skin without hairs (5DR) and through the skin with hairs, it was found that the additional (shunt) diffusion through the channels along hair's follicles can be important also in case of human skin where hair density is many times lower than in case of the used animal model. (author)

Containment penetration design and analysis by finite element methods

International Nuclear Information System (INIS)

Perry, R.F.; Rigamonti, G.; Dainora, J.

1975-01-01

Containment penetration designs which provide complete support to process piping containing high pressure and high temperature fluids and which do not employ cooling coils, require special provisions to sustain loadings associated with normal/abnormal conditions and to limit maximum temperature transmitted to the containment concrete wall. In order to accomodate piping loads and fluid temperatures within code and regulatory limitations, the containment penetration designs require careful analysis of two critical regions: 1) the portion of the penetration sleeve which is exposed to containment ambient conditions and 2) the portion of the penetration which connects the sleeve to process piping (flued head). Analytical models using finite element representation of process piping, penetration flued head, and exposed sleeve were employed to investigate the penetration assembly design. By application of flexible multi-step analyses, different penetration configurations were evaluated to determine the effects of key design parameters. Among the parameters studied were flued head angles with the process piping, sleeve length and wall thickness. Special designs employing fins welded to the sleeve to further lower the temperature at the concrete wall interface were also investigated and fin geometry effects reported. (Auth.)

Compound antimalarial ethosomal cataplasm: preparation, evaluation, and mechanism of penetration enhancement.

Science.gov (United States)

Shen, Shuo; Liu, Shu-Zhi; Zhang, Yu-Shi; Du, Mao-Bo; Liang, Ai-Hua; Song, Li-Hua; Ye, Zu-Guang

2015-01-01

Malaria is still a serious public health problem in some parts of the world. The problems of recurrence and drug resistance are increasingly more serious. Thus, it is necessary to develop a novel antimalarial agent. The objectives of this study were to construct a novel compound antimalarial transdermal nanosystem-ethosomal cataplasm, to investigate its characteristics and efficiency, and to systematically explore the penetration-enhancing mechanisms of ethosomal cataplasm. Artesunate-loaded ethosomes and febrifugine-loaded ethosomes were prepared, and their characteristics were evaluated. Drug-loaded ethosomes were incorporated in the matrix of cataplasm to form the compound antimalarial ethosomal cataplasm. With the help of ethosomal technology, the accumulated permeation quantity of artesunate significantly increased at 8 hours after administration, which was 1.57 times as much as that of conventional cataplasm. Soon after administration, the ethosomal cataplasm could make a large quantity of antimalarial drug quickly penetrate through skin, then the remaining drug in the ethosomal cataplasm could be steadily released. These characteristics of ethosomal cataplasm are favorable for antimalarial drugs to kill Plasmodium spp. quickly and prevent the resurgence of Plasmodium spp. As expected, the ethosomal cataplasm showed good antimalarial efficiency in this experiment. The negative conversion rates were 100% and the recurrence rates were 0% at all dosages. The mechanism of penetration enhancement of the ethosomal cataplasm was systematically explored using an optics microscope, polarization microscope, and transmission electron microscopy. The microstructure, ultrastructure, and birefringent structure in skin were observed. Data obtained in this study showed that the application of ethosomal technology to antimalarial cataplasm could improve the transdermal delivery of drug, enhance the efficacy, and facilitate practical application in clinic.

Akon - A Penetrator for Europa

Science.gov (United States)

Jones, Geraint

2016-04-01

Jupiter's moon Europa is one of the most intriguing objects in our Solar System. This 2000km-wide body has a geologically young solid water ice crust that is believed to cover a global ocean of liquid water. The presence of this ocean, together with a source of heating through tidal forces, make Europa a conceivable location for extraterrestrial life. The science case for exploring all aspects of this icy world is compelling. NASA has selected the Europa Mission (formerly Europa Clipper) to study Europa in detail in the 2020s through multiple flybys, and ESA's JUICE mission will perform two flybys of the body in the 2030s. The US agency has extended to the European Space Agency an invitation to provide a contribution to their mission. European scientists interested in Europa science and exploration are currently organizing themselves, in the framework of a coordinated Europa M5 Inititative to study concurrently the main options for this ESA contribution, from a simple addition of individual instruments to the NASA spacecraft, to a lander to investigate Europa's surface in situ. A high speed lander - a penetrator - is by far the most promising technology to achieve this latter option within the anticipated mass constraints, and studies of such a hard lander, many funded by ESA, are now at an advanced level. An international team to formally propose an Europa penetrator to ESA in response to the anticipated ESA M5 call is growing. The working title of this proposal is Akon (Άκων), named after the highly accurate javelin gifted to Europa by Zeus in ancient Greek mythology. We present plans for the Akon penetrator, which would impact Europa's surface at several hundred metres per second, and travel up to several metres into the moon's subsurface. To achieve this, the penetrator would be delivered to the surface by a dedicated descent module, to be destroyed on impact following release of the penetrator above the surface. It is planned that the instruments to be

Vehicle effects on human stratum corneum absorption and skin penetration.

Science.gov (United States)

Zhang, Alissa; Jung, Eui-Chang; Zhu, Hanjiang; Zou, Ying; Hui, Xiaoying; Maibach, Howard

2017-05-01

This study evaluated the effects of three vehicles-ethanol (EtOH), isopropyl alcohol (IPA), and isopropyl myristate (IPM)-on stratum corneum (SC) absorption and diffusion of the [ 14 C]-model compounds benzoic acid and butenafine hydrochloride to better understand the transport pathways of chemicals passing through and resident in SC. Following application of topical formulations to human dermatomed skin for 30 min, penetration flux was observed for 24 h post dosing, using an in vitro flow-through skin diffusion system. Skin absorption and penetration was compared to the chemical-SC (intact, delipidized, or SC lipid film) binding levels. A significant vehicle effect was observed for chemical skin penetration and SC absorption. IPA resulted in the greatest levels of intact SC/SC lipid absorption, skin penetration, and total skin absorption/penetration of benzoic acid, followed by IPM and EtOH, respectively. For intact SC absorption and total skin absorption/penetration of butenafine, the vehicle that demonstrated the highest level of sorption/penetration was EtOH, followed by IPA and IPM, respectively. The percent doses of butenafine that were absorbed in SC lipid film and penetrated through skin in 24 h were greatest for IPA, followed by EtOH and IPM, respectively. The vehicle effect was consistent between intact SC absorption and total chemical skin absorption and penetration, as well as SC lipid absorption and chemical penetration through skin, suggesting intercellular transport as a main pathway of skin penetration for model chemicals. These results suggest the potential to predict vehicle effects on skin permeability with simple SC absorption assays. As decontamination was applied 30 min after chemical exposure, significant vehicle effects on chemical SC partitioning and percutaneous penetration also suggest that skin decontamination efficiency is vehicle dependent, and an effective decontamination method should act on chemical solutes in the lipid domain.

Stylet penetration of Cacopsylla pyri; an electrical penetration graph (EPG) study

NARCIS (Netherlands)

Civolani, S.; Leis, M.; Grandi, G.; Garzo, E.; Pasqualini, E.; Musacchi, S.; Chicca, M.; Castaldelli, G.; Rossie, M.; Tjallingii, W.F.

2011-01-01

Detailed information on plant penetration activities by pear psylla Cacopsylla pyri L. (Hemiptera Psyllidae) is essential to study phytoplasma transmission of “Candidatus Phytoplasma pyri” responsible of pear decline disease (PD) and to trace and evaluate resistant traits in new pear tree selections

Estimation of the upper limit of aerosol nanoparticles penetration through inhomogeneous fibrous filters

International Nuclear Information System (INIS)

Podgorski, Albert

2009-01-01

The fully segregated flow model (FSFM) was formulated to describe filtration of aerosol nanoparticles in polydisperse fibrous filters made of fibers with different diameters. The model is capable of predicting significantly higher penetration of nanoparticles through polydisperse filters than it may be expected from the classical theory applied to a mean fiber diameter. The model was solved numerically in the case of the log-normal fiber size distribution, and a simple correlation between the actual penetration through a polydisperse filter and the one calculated for the geometric mean fiber diameter was proposed. Equivalent fiber diameter for deposition due to Brownian diffusion was determined and it was found to be dependent on particle size and filter's polydispersity degree, being significantly greater than any mean fiber diameter. It was noted that it is impossible to select any one universal mean fiber diameter to describe penetration of nanoparticles with different sizes. It was also shown that in the case of a polydisperse fibrous filter the apparent exponent of the Peclet number based on the mean fiber diameter is greater than the expected value of -2/3 for diffusional deposition in a monodisperse filter. This prediction is in agreement with the available experimental data. The FSFM is expected to give the estimation of the upper limit of nanoparticles penetration in polydisperse fibrous filters.

Status of surfactants as penetration enhancers in transdermal drug delivery

Directory of Open Access Journals (Sweden)

Iti Som

2012-01-01

Full Text Available Surfactants are found in many existing therapeutic, cosmetic, and agro-chemical preparations. In recent years, surfactants have been employed to enhance the permeation rates of several drugs via transdermal route. The application of transdermal route to a wider range of drugs is limited due to significant barrier to penetration across the skin which is associated with the outermost stratum corneum layer. Surfactants have effects on the permeability characteristics of several biological membranes including skin. They have the potential to solubilize lipids within the stratum corneum. The penetration of the surfactant molecule into the lipid lamellae of the stratum corneum is strongly dependent on the partitioning behavior and solubility of surfactant. Surfactants ranging from hydrophobic agents such as oleic acid to hydrophilic sodium lauryl sulfate have been tested as permeation enhancer to improve drug delivery. This article reviews the status of surfactants as permeation enhancer in transdermal drug delivery of various drugs.

Behaviour at thermal ageing of power cable components through penetrations

International Nuclear Information System (INIS)

Puiu, D.; Gyongyosi, T.; Dinu, E.

2009-01-01

The materials for electric insulation and exterior jackets of the power cables are formulated organic compounds. The environmental service conditions will induce chemical and/or physical processes at molecular level of the material; these processes are the ageing mechanisms. The power cables passing through penetrations lead to an increase of the rate of thermal ageing mechanisms, resulting in irreversible degradation of mechanical and electric properties of the organic compounds and of the functional properties of the cable. The paper presents the results of the laboratory tests when the real environmental service conditions for penetration are simulated, the comparison with the results of the thermal computation of the power cables heating and the evaluation of the influence of temperature increase of the power cable components on the cable lifetime. For the particular case of a power cable with PVC insulation, we estimated a lifetime decrease about seven years as referred to lifetime of about 30 years for operation in air. (authors)

Penetration, distribution and kinetics of 2,3,7,8-tetrachlorodibenzo-p-dioxin in human skin in vitro

International Nuclear Information System (INIS)

Weber, L.W.D.; Rozman, K.

1991-01-01

The in vitro penetration of 3 H-labeled 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) into human cadaver skin was studied at concentrations of 65 and 6.5 ng TCDD per cm 2 of skin surface. Vehicles used were acetone to simulate exposure to TCDD as a dry material, and mineral oil to simulate exposure to TCDD in an oily medium. Penetration was performed for 30, 100, 300, and 1000 min in improved Franz cells. Skin was used either intact, or with stripped horny layer. Skin was sectioned along its natural layers and radioactivity determined in epidermis and dermis. TCDD did not readily penetrate into human skin in vitro. The vehicle of exposure to TCDD played an important role in dermal penetration. The rapidly evaporating acetone allowed TCDD to penetrate deeply into the loose surface lamellae of the horny layer, but then appeared to be poorly available for further penetration. Mineral oil as the vehicle showed its penetration even more. The stratum corneum acted as a protective barrier, as its removal increased the amount of TCDD absorbed into layers of the skin. Hourly rates of adsorption of TCDD per unit area of skin were calculated in two ways: a worst case scenario where TCDD absorbed into any layer of skin including the stratum corneum and a physiological approach where only that amount of TCDD was considered absorbed which had penetrated beyond the epidermis. Under worst case scenario conditions the stratum corneum appeared to mediate dermal absorption of TCDD. This was, however, not the case with the physiological approach. There was a consistent relationship between concentration of TCDD applied and concentration of TCDD found in skin. Also, a clear-cut correlation was found between the amount of TCDD that penetrated and the time of exposure. (orig./MG)

Opportunities for high wind energy penetration

DEFF Research Database (Denmark)

Tande, J.O.; Hansen, J.C.

1997-01-01

Wind power is today a mature technology, which at windy locations, is economically competitive to conventional power generation technologies. This and growing global environmental concerns have led governments to encourage and plan for wind energy development, a typical aim being 10% of electricity...... consumption. The successful operation of the three major power systems of Cape Verde, with a total wind energy penetration of about 15% since December 1994, demonstrates that power systems can be operated with high penetration of wind energy by adding simple control and monitoring systems only. Thorough...... analyses conclude that expanding to even above 15% wind energy penetration in the Cape Verde power systems is economical. Worldwide, numerous locations with favorable wind conditions and power systems similar to the Capeverdean provide good opportunities for installing wind farms and achieving high wind...

Current Understanding of Physicochemical Mechanisms for Cell Membrane Penetration of Arginine-rich Cell Penetrating Peptides: Role of Glycosaminoglycan Interactions.

Science.gov (United States)

Takechi-Haraya, Yuki; Saito, Hiroyuki

2018-01-01

Arginine-rich cell penetrating peptides (CPPs) are very promising drug carriers to deliver membrane-impermeable pharmaceuticals, such as siRNA, bioactive peptides and proteins. CPPs directly penetrate into cells across cell membranes via a spontaneous energy-independent process, in which CPPs appear to interact with acidic lipids in the outer leaflet of the cell membrane. However, acidic lipids represent only 10 to 20% of the total membrane lipid content and in mammalian cell membranes they are predominantly located in the inner leaflet. Alternatively, CPPs favorably bind in a charge density- dependent manner to negatively charged, sulfated glycosaminoglycans (GAGs), such as heparan sulfate and chondroitin sulfate, which are abundant on the cell surface and are involved in many biological functions. We have recently demonstrated that the interaction of CPPs with sulfated GAGs plays a critical role in their direct cell membrane penetration: the favorable enthalpy contribution drives the high-affinity binding of arginine-rich CPPs to sulfated GAGs, initiating an efficient cell membrane penetration. The favorable enthalpy gain is presumably mainly derived from a unique property of the guanidino group of arginine residues forming multidentate hydrogen bonding with sulfate and carboxylate groups in GAGs. Such interactions can be accompanied with charge neutralization of arginine-rich CPPs, promoting their partition into cell membranes. This review summarizes the current understanding of the physicochemical mechanism for lipid membrane penetration of CPPs, and discusses the role of the GAG interactions on the cell membrane penetration of CPPs. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Thermal Behavior of the Reactor Vessel Penetration Under External Vessel Cooling During a Severe Accident

International Nuclear Information System (INIS)

Kang, Kyoung-Ho; Park, Rae-Joon; Kim, Jong-Tae; Min, Byung-Tae; Lee, Ki-Young; Kim, Sang-Baik

2004-01-01

Experimental and analytical studies on the thermal behavior of reactor vessel penetration have been performed under external vessel cooling during a severe accident in the Korean next-generation reactor APR1400. Two types of tests, SUS-EXT and SUS-DRY with and without external vessel cooling, respectively, have been performed using sustained heating by an induction heater. Three tests have been carried out varying the cooling conditions at the vessel outer surface in the SUS-EXT tests. The experimental results have been thermally estimated using the LILAC computer code. The experimental results indicate that the inner surface of the vessel was ablated by the 45-mm thickness in the SUS-DRY test. Despite the total ablation of the welding material, the penetration was not ejected outside the vessel, which could be attributed to the thermal expansion of the penetration. Unlike the SUS-DRY test, the thickness of the ablation was ∼15 to 20 mm at most, so the welding was preserved in the SUS-EXT tests. It is concluded from the experimental results that the external vessel cooling highly affected the ablation configuration and the thermal behaviors of the vessel and the penetration. An increase in coolant mass flow rate from 0.047 to 0.152 kg/s had effects on the thermal behavior of the lower head vessel and penetration in the SUS-EXT tests. The LILAC analytical results on temperature distribution and ablation depth in the lower head vessel and penetration were very similar to the experimental results

The penetration of aerosols through fine capillaries

International Nuclear Information System (INIS)

Mitchell, J.P.; Edwards, R.T.; Ball, M.H.E.

1989-10-01

A novel experimental technique has been developed to study the penetration of aerosol particles ranging from about 1 to 15 μm aerodynamic diameter through capillaries varying from 20 to 80 μm bore and from 10 to 50 mm in length. When the driving pressure was 100 kPa, the penetration of the airborne particles was considerably smaller than expected from a simple comparison of particle diameter with the bore of the capillary. Particle size distributions determined after penetration through the capillaries were in almost all cases similar to the particle size distribution of the aerosol at the capillary entrance. This lack of size-selectivity can be explained in terms of the capillary behaving as a conventional suction-based sampler from a near still (calm) air environment. The resulting particle penetration data are important in assessing the potential for the leakage of aerosols through seals in containers used to transport radioactive materials. (author)

THERAPEUTIC EFFECTS OF ELECTROACUPUNCTURE PLUS POINT-PENETRATION FOR CHRONIC ANKLE JOINT SPRAIN

Institute of Scientific and Technical Information of China (English)

ZHAO Yi-zao

2005-01-01

Objective: To observe clinical therapeutic effects of electroacupuncture plus point-penetration for chronic ankle joint sprain. Methods: 76 patients were randomly divided into treatment group (n=43) and control group (n=33).In teatment group, penetration needling from Qiuxu (丘墟 GB 40) to Zhaohai (照海 KI 6) was performed, combined with electrical stimulation for 30 min. Patients of control group were ordered to take Antinfan (50 mg,b.I.d.),supplemented with local external application of Votalin cream (b.I.d.).After 14 treatments (two courses), the therapeutic effect was assessed. Results: Following two courses of treatment, of the 43 cases and 33 cases in treatment and control groups,33 (76.7%) and 15 (45.5%) were cured, 4 (9.3%) and 7 (21.2%) had marked improvement in their symptoms, 3 (7.0%) and 2 (6.1%) had improvement, and 3 (7.0%) and 9(27.3%) failed, with the effective rates being 93.0% and 72.7% respectively. The therapeutic effect of treatment group was significantly superior to that of control group (P<0.05). Conclusion: Penetrative needling plus EA is significantly superior to medication in relieving chronic ankle spain patient's clinical symptoms and signs.

Hydrogen isotope in erbium oxide: Adsorption, penetration, diffusion, and vacancy trapping

International Nuclear Information System (INIS)

Mao, Wei; Chikada, Takumi; Suzuki, Akihiro; Terai, Takayuki; Matsuzaki, Hiroyuki

2015-01-01

Highlights: • H adsorption on cubic Er 2 O 3 surface results in electron transfer from H to the surface. • The H penetration energy of at least 1.6 eV is required for cubic Er 2 O 3 surface. • The dominated mechanisms of H diffusion in bulk Er 2 O 3 are elucidated. • H diffusion near or at vacancies in Er 2 O 3 is an exothermic reaction. - Abstract: In this study, we report results using first-principles density functional theory calculations for four critical aspects of the interaction: H adsorption on Er 2 O 3 surface, surface-to-subsurface penetration of H into Er 2 O 3 , bulk diffusion of H in Er 2 O 3 , and trapping of H at vacancies. We identify surface stable adsorption positions and find that H prefers to transfer electrons to the surfaces and form covalent bonds with the nearest neighboring four oxygen atoms. For low surface coverage of H as in our case (0.89 × 10 14 H/cm 2 ), a penetration energy of at least 1.60 eV is required for cubic Er 2 O 3 surfaces. Further, the H diffusion barrier between the planes defined by Er 2 O 3 units along the favorable <1 1 1> direction is found to be very small – 0.16 eV – whereas higher barriers of 0.41 eV and 1.64 eV are required for diffusion across the planes, somewhat higher than the diffusion energy barrier of 0.20 eV observed experimentally at 873 K. In addition, we predict that interstitial H is exothermically trapped when it approaches a vacancy with the vacancy defect behaving as an electron trap since the H-vacancy defect is found to be more stable than the intrinsic defect

The relative effectiveness of managed care penetration and the healthcare safety net in reducing avoidable hospitalizations.

Science.gov (United States)

Pracht, Etienne E; Orban, Barbara L; Comins, Meg M; Large, John T; Asin-Oostburg, Virginia

2011-01-01

Avoidable hospitalizations represent a key indicator for access to, and the quality of, primary care. Therefore, understanding their behavior is essential in terms of management of healthcare resources and costs. This analysis examines the affect of 2 healthcare strategies on the rate of avoidable hospitalization, managed care and the healthcare safety net. The avoidable hospitalizations definition developed by Weissman et al. (1992) was used to identify relevant inpatient episodes. A 2-stage simultaneous equations multivariate regression model with instrumental variables was used to estimate the relative influence of HMO penetration and the composition of local hospital markets on the rate of avoidable hospitalizations. Control variables in the model include healthcare supply and demand, demographic, socioeconomic, and health status characteristics. Increased market presence of public hospitals significantly reduced avoidable hospitalizations. HMO penetration did not influence the rate of avoidable hospitalizations. The results suggest that public investments in healthcare facilities and infrastructure are more effective in reducing avoidable hospitalizations. © 2011 National Association for Healthcare Quality.

Comparative analysis of the effects of CO2 fractional laser and sonophoresis on human skin penetration with 5-aminolevulinic acid.

Science.gov (United States)

Choi, J H; Shin, E J; Jeong, K H; Shin, M K

2017-11-01

Successful delivery of a photosensitizer into the skin is an important factor for effective photodynamic therapy (PDT). The effective method to increase drug penetration within short incubation time overcoming skin barrier have been investigated. This study was performed to analyze and compare the effectiveness of ablative fractional laser (FXL) pretreatment and/or sonophoresis for enhancing the penetration of 5-aminolevulinic acid (ALA) into human skin in vivo. Twenty-four identical 1 × 1 cm 2 treatment areas were mapped on the backs of ten healthy male subjects. Each area received FXL pretreatment and/or sonophoresis with different energy settings and ALA incubation times. After treatments, porphyrin fluorescence reflecting the ALA penetration were measured. Application of ablative CO 2 FXL pretreatment resulted to higher fluorescence intensities than the non-treatment group. Incubation times were positively correlated with the increments of ALA penetration. However, increasing pulse energy or combining with sonophoresis did not show additional positive effects on ALA penetration. Ablative CO 2 FXL pretreatment effectively facilitated ALA penetration in human skin in vivo. Ablative CO 2 FXL alone without sonophoresis setting pulse energy of 10 and 20 mJ with more than 60 min of ALA incubation time could be an ideal setting for ALA penetration.

Medicaid HMO penetration and its mix: did increased penetration affect physician participation in urban markets?

Science.gov (United States)

Adams, E Kathleen; Herring, Bradley

2008-02-01

To use changes in Medicaid health maintenance organization (HMO) penetration across markets over time to test for effects on the extent of Medicaid participation among physicians and to test for differences in the effects of increased use of commercial versus Medicaid-dominant plans within the market. The nationally representative Community Tracking Study's Physician Survey for three periods (1996-1997, 1998-1999, and 2000-2001) on 29,866 physicians combined with Centers for Medicare and Medicaid Services (CMS) and InterStudy data. Market-level estimates of Medicaid HMO penetration are used to test for (1) any participation in Medicaid and (2) the degree to which physicians have an "open" (i.e., nonlimited) practice accepting new Medicaid patients. Models account for physician, firm, and local characteristics, Medicaid relative payment levels adjusted for geographic variation in practice costs, and market-level fixed effects. There is a positive effect of increases in commercial Medicaid HMO penetration on the odds of accepting new Medicaid patients among all physicians, and in particular, among office-based physicians. In contrast, there is no effect, positive or negative, from expanding the penetration of Medicaid-dominant HMO plans within the market. Increases in cost-adjusted Medicaid fees, relative to Medicare levels, were associated with increases in the odds of participation and of physicians having an "open" Medicaid practice. Provider characteristics that consistently lower participation among all physicians include being older, board certified, a U.S. graduate and a solo practitioner. The effects of Medicaid HMO penetration on physician participation vary by the type of plan. If states are able to attract and retain commercial plans, participation by office-based physicians is likely to increase in a way that opens existing practices to more new Medicaid patients. Other policy variables that affect participation include the presence of a federally

The environment and its impact on gas penetration in the energy market east

International Nuclear Information System (INIS)

Mabro, R.E.; Stoppard, M.

1995-01-01

The thesis of this paper is that gas, although free from pollution problems is nevertheless more benign generally appreciated. The obstacles to gas penetration are flawed environmental legislation, political factors and,in some areas, a cost disadvantage relative to other fuels which turn out to be higher than the environmental premium which society is prepared to pay. (Author)

Evaluation of the effect of media velocity on filter efficiency and most penetrating particle size of nuclear grade high-efficiency particulate air filters.

Science.gov (United States)

Alderman, Steven L; Parsons, Michael S; Hogancamp, Kristina U; Waggoner, Charles A

2008-11-01

High-efficiency particulate air (HEPA) filters are widely used to control particulate matter emissions from processes that involve management or treatment of radioactive materials. Section FC of the American Society of Mechanical Engineers AG-1 Code on Nuclear Air and Gas Treatment currently restricts media velocity to a maximum of 2.5 cm/sec in any application where this standard is invoked. There is some desire to eliminate or increase this media velocity limit. A concern is that increasing media velocity will result in higher emissions of ultrafine particles; thus, it is unlikely that higher media velocities will be allowed without data to demonstrate the effect of media velocity on removal of ultrafine particles. In this study, the performance of nuclear grade HEPA filters, with respect to filter efficiency and most penetrating particle size, was evaluated as a function of media velocity. Deep-pleat nuclear grade HEPA filters (31 cm x 31 cm x 29 cm) were evaluated at media velocities ranging from 2.0 to 4.5 cm/sec using a potassium chloride aerosol challenge having a particle size distribution centered near the HEPA filter most penetrating particle size. Filters were challenged under two distinct mass loading rate regimes through the use of or exclusion of a 3 microm aerodynamic diameter cut point cyclone. Filter efficiency and most penetrating particle size measurements were made throughout the duration of filter testing. Filter efficiency measured at the onset of aerosol challenge was noted to decrease with increasing media velocity, with values ranging from 99.999 to 99.977%. The filter most penetrating particle size recorded at the onset of testing was noted to decrease slightly as media velocity was increased and was typically in the range of 110-130 nm. Although additional testing is needed, these findings indicate that filters operating at media velocities up to 4.5 cm/sec will meet or exceed current filter efficiency requirements. Additionally

Evaluation of Skin Penetration of Diclofenac from a Novel Topical Non Aqueous Solution: A Comparative Bioavailability Study.

Science.gov (United States)

Nivsarkar, Manish; Maroo, Sanjaykumar H; Patel, Ketan R; Patel, Dixit D

2015-12-01

Different topical formulations of diclofenac have varying skin penetration profile. Recent advances in science and technology has led to the development of many new formulations of drugs for topical drug delivery. One such technological development has led to the innovation of Dynapar QPS, a novel, non-aqueous, quick penetrating solution (QPS) of diclofenac diethylamine. This study was aimed to measure the total exposure from the drug penetrating the skin in healthy human subjects and comparing the relative systemic bioavailability of Dynapar QPS(®) with diclofenac emulgel. A 200 mg of diclofenac from either Dynapar QPS(®) (5 ml) or emulgel (20 g) was applied on back of subject as per the randomisation schedule. Blood samples were collected up to 16 hours post drug application. Plasma concentration of diclofenac was measured by pre-validated HPLC method. Pharmacokinetic (PK) parameters like Cmax, Tmax, t1/2, AUC0-t, AUC0-∞, and Kel, of diclofenac were determined for both the formulations. Mean Cmax after administration of Dynapar QPS(®) and diclofenac emulgel were 175.93 and 40.04 ng/ml, respectively. Tmax of diclofenac was almost half with QPS compared to emulgel (5.24 hrs versus 9.53 hrs respectively). The mean AUC0-t and AUC0-∞ after administration of Dynapar QPS(®) was higher as compared to diclofenac emulgel (AUC0-t: 1224.19 versus 289.78 ng.h/ml, respectively; AUC0-∞: 1718.21 versus 513.83 ng.h/ml, respectively). None of the subject experienced any adverse event during the study. The results indicate an enhanced penetration and subsequent absorption of diclofenac from Dynapar QPS(®) as compared to diclofenac emulgel. Higher penetration is likely to translate into better pain relief in patients.

Quantification of water penetration into concrete through cracks by neutron radiography

International Nuclear Information System (INIS)

Kanematsu, M.; Maruyama, I.; Noguchi, T.; Iikura, H.; Tsuchiya, N.

2009-01-01

Improving the durability of concrete structures is one of the ways to contribute to the sustainable development of society, and it has also become a crucial issue from an environmental viewpoint. It is well known that moisture behavior in reinforced concrete is linked to phenomena such as cement hydration, volume change and cracking caused by drying shrinkage, rebar corrosion and water leakage that affect the durability of concrete. In this research, neutron radiography was applied for visualization and quantification of water penetration into concrete through cracks. It is clearly confirmed that TNR can make visible the water behavior in/near horizontal/vertical cracks and can quantify the rate of diffusion and concentration distribution of moisture with high spatial and time resolution. On detailed analysis, it is observed that water penetrates through the crack immediately after pouring and its migration speed and distribution depend on the moisture condition in the concrete.

Characterization of radon penetration of different structural domains of concrete. Final project report

International Nuclear Information System (INIS)

Nielson, K.K.; Rogers, V.C.

1996-05-01

This report documents the research activities by Rogers and Associates Engineering Corporation on grant DE-FG03-93ER61600 during the funded project period from August 1993 to April 1996. The objective of this research was to characterize the mechanisms and rates of radon gas penetration of the different structural domains of the concrete components of residential floor slabs, walls, and associated joints and penetrations. The research was also to characterize the physical properties of the concretes in these domains to relate their radon resistance to their physical properties. These objectives support the broader goal of characterizing which, if any, concrete domains and associated properties constitute robust barriers to radon and which permit radon entry, either inherently or in ways that could be remediated or avoided

Prevention of serious impurity penetration into water-steam circuits

International Nuclear Information System (INIS)

Burgmann, F.; Bursik, A.; Flunkert, F.; Nieder, R.

1977-01-01

In consequence of reports from several power Plants concerning heavy damages due to penetrations of impurities into the water-steam circuit, the VGB Sub-Committee 'Water Chemistry in Thermal Power Plants' has established a working group to check-up how serious impurity penetration can be avoided. The lecture describes possible danger points. Suitable technical arrangements for the avoidance of penetrations, and possibilities for monitoring will be discussed. Penetration of impurities cannot be avoided with absolute reliability, even when the recommended arrangements and usual monitoring are realized. Additional measures for the protection of water steam circuits will be suggested. (orig.) [de

Consistent constitutive modeling of metallic target penetration using empirical, analytical, and numerical penetration models

Directory of Open Access Journals (Sweden)

John (Jack P. Riegel III

2016-04-01

Full Text Available Historically, there has been little correlation between the material properties used in (1 empirical formulae, (2 analytical formulations, and (3 numerical models. The various regressions and models may each provide excellent agreement for the depth of penetration into semi-infinite targets. But the input parameters for the empirically based procedures may have little in common with either the analytical model or the numerical model. This paper builds on previous work by Riegel and Anderson (2014 to show how the Effective Flow Stress (EFS strength model, based on empirical data, can be used as the average flow stress in the analytical Walker–Anderson Penetration model (WAPEN (Anderson and Walker, 1991 and how the same value may be utilized as an effective von Mises yield strength in numerical hydrocode simulations to predict the depth of penetration for eroding projectiles at impact velocities in the mechanical response regime of the materials. The method has the benefit of allowing the three techniques (empirical, analytical, and numerical to work in tandem. The empirical method can be used for many shot line calculations, but more advanced analytical or numerical models can be employed when necessary to address specific geometries such as edge effects or layering that are not treated by the simpler methods. Developing complete constitutive relationships for a material can be costly. If the only concern is depth of penetration, such a level of detail may not be required. The effective flow stress can be determined from a small set of depth of penetration experiments in many cases, especially for long penetrators such as the L/D = 10 ones considered here, making it a very practical approach. In the process of performing this effort, the authors considered numerical simulations by other researchers based on the same set of experimental data that the authors used for their empirical and analytical assessment. The goals were to establish a

Age-related percutaneous penetration part 1: skin factors.

Science.gov (United States)

Konda, S; Meier-Davis, S R; Cayme, B; Shudo, J; Maibach, H I

2012-05-01

Changes in the skin that occur in the elderly may put them at increased risk for altered percutaneous penetration from pharmacotherapy along with potential adverse effects. Skin factors that may have a role in age-related percutaneous penetration include blood flow, pH, skin thickness, hair and pore density, and the content and structure of proteins, glycosaminoglycans (GAGs), water, and lipids. Each factor is examined as a function of increasing age along with its potential impact on percutaneous penetration. Additionally, topical drugs that successfully overcome the barrier function of the skin can still fall victim to cutaneous metabolism, thereby producing metabolites that may have increased or decreased activity. This overview discusses the current data and highlights the importance of further studies to evaluate the impact of skin factors in age-related percutaneous penetration.

Evaluation of penetration and scattering components in conventional pinhole SPECT: phantom studies using Monte Carlo simulation

International Nuclear Information System (INIS)

Deloar, Hossain M; Watabe, Hiroshi; Aoi, Toshiyuki; Iida, Hidehiro

2003-01-01

In quantitative pinhole SPECT, photon penetration through the collimator edges (penetration), and photon scattering by the object (object scatter) and collimator (collimator scatter) have not been investigated rigorously. Monte Carlo simulation was used to evaluate these three physical processes for different tungsten knife-edge pinhole collimators using uniform, hotspot and donut phantoms filled with 201 Tl, 99m Tc, 123 I and 131 I solutions. For the hotspot phantom, the penetration levels with respect to total counts for a 1 mm pinhole aperture were 78%, 28% and 23% for 131 I, 123 I and 99m Tc, respectively. For a 2 mm aperture, these values were 65% for 131 I, 16% for 123 I and 12% for 99m Tc. For all pinholes, 201 Tl penetration was less than 4%. The evaluated scatter (from object and collimator) with a hotspot phantom for the 1 mm pinhole was 24%, 16%, 18% and 13% for 201 Tl, 99m Tc, 123 I and 131 I, respectively. Summation of the object and collimator scatter for the uniform phantom was approximately 20% higher than that for the hotspot phantom. Significant counts due to penetration and object and collimator scatter in the reconstructed image were observed inside the core of the donut phantom. The collimator scatter can be neglected for all isotopes used in this study except for 131 I. Object scatter correction for all radionuclides used in this study is necessary and correction for the penetration contribution is necessary for all radionuclides but 201 Tl

Numerical analysis of impact-penetration problems for nuclear reactor safety

International Nuclear Information System (INIS)

Dubois, J.J.; Chedmail, J.F.; Bianchini, J.C.

1977-01-01

This paper discusses the finite element and finite difference analysis of two impact penetration problems, namely a fuel cask drop on a foundation slab and a missile penetration into a reinforced concrete structure. For a realistic detailed analysis, advanced techniques were required in the following areas: reinforced concrete simulation; remeshing algorithms for penetration induced distortions; boundary condition. The fuel cask drop on a concrete slab generates complex elasto plastic waves which propagate towards the pool where tensile cracks might appear. The problem is analysed in two steps: calculation of the energy absorbed locally around the impacted area; calculation of the three dimensional wave propagation towards the pool. For the analysis of missile penetration problems, two examples are shown: a 3000 kg missile with a velocity of 132 m/s penetrates a 1.2 m thick concrete wall (PAM-GDYNS) and a 3600 kg missile with a velocity of 90 m/s (F.D. Program HEMP-ESI) penetrates a wall at a floor level. For the second case, the computed impact-penetration mechanism is

Water Penetration through a Superhydrophobic Mesh During a Drop Impact

Science.gov (United States)

Ryu, Seunggeol; Sen, Prosenjit; Nam, Youngsuk; Lee, Choongyeop

2017-01-01

When a water drop impacts a mesh having submillimeter pores, a part of the drop penetrates through the mesh if the impact velocity is sufficiently large. Here we show that different surface wettability, i.e., hydrophobicity and superhydrophobicity, leads to different water penetration dynamics on a mesh during drop impact. We show, despite the water repellence of a superhydrophobic surface, that water can penetrate a superhydrophobic mesh more easily (i.e., at a lower impact velocity) over a hydrophobic mesh via a penetration mechanism unique to a superhydrophobic mesh. On a superhydrophobic mesh, the water penetration can occur during the drop recoil stage, which appears at a lower impact velocity than the critical impact velocity for water penetration right upon impact. We propose that this unique water penetration on a superhydrophobic mesh can be attributed to the combination of the hydrodynamic focusing and the momentum transfer from the water drop when it is about to bounce off the surface, at which point the water drop retrieves most of its kinetic energy due to the negligible friction on superhydrophobic surfaces.

Topological properties of the limited penetrable horizontal visibility graph family

Science.gov (United States)

Wang, Minggang; Vilela, André L. M.; Du, Ruijin; Zhao, Longfeng; Dong, Gaogao; Tian, Lixin; Stanley, H. Eugene

2018-05-01

The limited penetrable horizontal visibility graph algorithm was recently introduced to map time series in complex networks. In this work, we extend this algorithm to create a directed-limited penetrable horizontal visibility graph and an image-limited penetrable horizontal visibility graph. We define two algorithms and provide theoretical results on the topological properties of these graphs associated with different types of real-value series. We perform several numerical simulations to check the accuracy of our theoretical results. Finally, we present an application of the directed-limited penetrable horizontal visibility graph to measure real-value time series irreversibility and an application of the image-limited penetrable horizontal visibility graph that discriminates noise from chaos. We also propose a method to measure the systematic risk using the image-limited penetrable horizontal visibility graph, and the empirical results show the effectiveness of our proposed algorithms.

DEVELOPMENT OF NON-DESTRUCTIVE MONITORING SYSTEM FOR CHLORIDE PENETRATION INTO REINFORCED CONCRETE STRUCTURES

Directory of Open Access Journals (Sweden)

Antoni Antoni

2006-01-01

Full Text Available Reinforced concrete structures in marine environment are subjected to chloride penetration, which significantly degrades the structural performance due to the occurrence of corrosion in the steel reinforcement. The performance degradation of the structures would reduce the intended service life and caused higher maintenance and repair cost. Therefore, system to monitor chloride penetration into reinforced concrete before the starting corrosion of reinforcement is indispensable. An embedded probe system to detect chloride penetration into concrete was developed in Japan. This probe consists of a cementitious material body and some number of wires as sensors, which are set in the shallow ditches around the probe body. The system detect the chloride penetration by monitoring the initiation time of wire corrosion, it also has the advantages of continuous monitoring and early warning on the onset of corrosion in the reinforcement. However, the probe had not yet had high sensitivity for detecting critical chloride content in concrete. Therefore to increase its sensitivity, four types of improvements, namely partial coating of the wires, waterproofing on the probe body, filling the ditches with porous material and supplying small current on the wires were evaluated in this study. From the experimental result, it was observed that supplying small current and partial coating of the wires could improve the sensitivity of the probe significantly, while waterproofing treatment on the probe body and filling the ditches did not have significant contribution.

Liposomes equipped with cell penetrating peptide BR2 enhances chemotherapeutic effects of cantharidin against hepatocellular carcinoma.

Science.gov (United States)

Zhang, Xue; Lin, Congcong; Lu, Aiping; Lin, Ge; Chen, Huoji; Liu, Qiang; Yang, Zhijun; Zhang, Hongqi

2017-11-01

A main hurdle for the success of tumor-specific liposomes is their inability to penetrate tumors efficiently. In this study, we incorporated a cell-penetrating peptide BR2 onto the surface of a liposome loaded with the anticancer drug cantharidin (CTD) to create a system targeting hepatocellular carcinoma (HCC) cells more efficiently and effectively. The in vitro cytotoxicity assay comparing the loaded liposomes' effects on hepatocellular cancer HepG2 and the control Miha cells showed that CTD-loaded liposomes had a stronger anticancer effect after BR2 modification. The cellular uptake results of HepG2 and Miha cells further confirmed the superior ability of BR2-modified liposomes to penetrate cancer cells. The colocalization study revealed that BR2-modified liposomes could enter tumor cells and subsequently release drugs. A higher efficiency of delivery by BR2 liposomes as compared to unmodified liposomes was evident by evaluation of the HepG2 tumor spheroids penetration and inhibition. The biodistribution studies and anticancer efficacy results in vivo showed the significant accumulation of BR2-modified liposomes into tumor sites and an enhanced tumor inhibition. In conclusion, BR2-modified liposomes improve the anticancer potency of drugs for HCC.

A comparison of sulfur mustard and heptane penetrating a dipalmitoylphosphatidylcholine bilayer membrane

Energy Technology Data Exchange (ETDEWEB)

Mueller, Thomas J., E-mail: t.mueller@theo.chemie.tu-darmstadt.de [Theoretische Physikalische Chemie, Eduard-Zintl-Institut fuer Anorganische und Physikalische Chemie, Technische Universitaet Darmstadt, Petersenstrasse 20, 64287 Darmstadt (Germany); Mueller-Plathe, Florian [Theoretische Physikalische Chemie, Eduard-Zintl-Institut fuer Anorganische und Physikalische Chemie, Technische Universitaet Darmstadt, Petersenstrasse 20, 64287 Darmstadt (Germany)

2009-08-30

In the present molecular dynamics simulations we study the chemical warfare agent sulfur mustard (bis(2-chloroethyl) sulfide) and the alkane heptane inserted into a dipalmitoylphosphatidylcholine (DPPC) bilayer, a generic model for a biological membrane. We investigate the diffusion, the orientation, the preferred positioning, and the end-to-end distance of the solutes within the membrane as well as the corresponding coupling times. We compare results of equilibrium simulations and simulation at different external forces, which drag the solutes through the membrane. These properties lead to a general comparison of the rotational and translational behaviors of the two solutes during the penetration of the membrane. We show that sulfur mustard, due to its atomic charge polarization, its bigger flexibility and its smaller molecular volume, is the faster moving molecule within the membrane. In last consequence, we show that this leads to different limits for the transport mechanism as observed in these simulations. For heptane the hindrance to penetrate into the membrane is significantly higher than for sulfur mustard. In contrast to heptane molecules, which spend the most of the time penetrating the tail groups, sulfur mustard needs more time to escape the tail group-head group interface of the membrane.

Potential of ultrafine grained materials as high performance penetrator materials

Directory of Open Access Journals (Sweden)

Lee C.S.

2012-08-01

Full Text Available The shear formability and the metal jet formability are important for the kinetic energy penetrator and the chemical energy penetrator, respectively. The shear formability of ultrafine grained (UFG steel was examined, mainly focusing on the effects of the grain shape on the shear characteristics. For this purpose, UFG 4130 steel having the different UFG structures, the lamellar UFG and the equiaxed UFG, was prepared by equal channel angular pressing (ECAP. The lamellar UFG steel exhibited more sharper and localized shear band formation than the equiaxed UFG steel. This is because a lamellar UFG structure was unfavourable against grain rotation which is a main mechanism of the band propagation in UFG materials. Meanwhile, the metal jet formability of UFG OFHC Cu also processed by ECAP was compared to that of coarse grained (CG one by means of dynamic tensile extrusion (DTE tests. CG OFHC Cu exhibited the higher DTE ductility, i.e. better metal jet stability, than UFG OFHC Cu. The initial high strength and the lack of strain hardenability of UFG OFHC Cu were harmful to the metal jet formability.

Containment penetration design and analysis by finite element methods

International Nuclear Information System (INIS)

Perry, R.F.; Rigamonti, G.; Dainora, J.

1975-01-01

Containment penetration designs which provide complete support to process piping containing high pressure and high temperature fluids and which do not employ cooling coils, require special provisions to sustain loadings associated with normal/abnormal conditions and to limit maximum temperature transmitted to the containment concrete wall. In order to accommodate piping imposed loads and fluid temperatures within code and regulatory limitations, the containment penetration designs require careful analysis of two critical regions: the portion of the penetration sleeve which is exposed to containment ambient conditions and the portion of the penetration which connects the sleeve to process piping (flued head). The length and thickness of the sleeve must be designed to provide maximum heat dissipation to the atmosphere and minimum heat conduction through the sleeve to meet concrete temperature limitations. The sleeve must have the capability to transmit the postulated piping loads to concrete embedments in the containment shell. The penetration flued head design must be strong enough to transfer high mechanical loads and be flexible enough to accommodate the thermal stresses generated by the high temperature fluid. Analytical models using finite element representations of process piping, penetration flued head, and exposed sleeve were employed to investigate the penetration assembly design. By application of flexible multi-step analyses, different penetration configurations were evaluated to determine the effects of key design parameters. Among the parameters studied were flued head profiles, flued head angles with the process piping, sleeve length and wall thickness. Special designs employing fins welded to the sleeve to lower the temperature at the concrete wall interface were investigated and fin geometry effects reported

Soil Penetration by Earthworms and Plant Roots--Mechanical Energetics of Bioturbation of Compacted Soils.

Directory of Open Access Journals (Sweden)

Siul Ruiz

Full Text Available We quantify mechanical processes common to soil penetration by earthworms and growing plant roots, including the energetic requirements for soil plastic displacement. The basic mechanical model considers cavity expansion into a plastic wet soil involving wedging by root tips or earthworms via cone-like penetration followed by cavity expansion due to pressurized earthworm hydroskeleton or root radial growth. The mechanical stresses and resulting soil strains determine the mechanical energy required for bioturbation under different soil hydro-mechanical conditions for a realistic range of root/earthworm geometries. Modeling results suggest that higher soil water content and reduced clay content reduce the strain energy required for soil penetration. The critical earthworm or root pressure increases with increased diameter of root or earthworm, however, results are insensitive to the cone apex (shape of the tip. The invested mechanical energy per unit length increase with increasing earthworm and plant root diameters, whereas mechanical energy per unit of displaced soil volume decreases with larger diameters. The study provides a quantitative framework for estimating energy requirements for soil penetration work done by earthworms and plant roots, and delineates intrinsic and external mechanical limits for bioturbation processes. Estimated energy requirements for earthworm biopore networks are linked to consumption of soil organic matter and suggest that earthworm populations are likely to consume a significant fraction of ecosystem net primary production to sustain their subterranean activities.

Penetrating cardiac injury by wire thrown from a lawn mower.

Science.gov (United States)

Rubio, P A; Reul, G J

1979-01-01

The first successful surgically treated case of penetrating heart injury, specifically the right ventricle, caused by a fragment of coat hanger wire thrown by a lawn mower, is reported. Though traumatic heart injuries are rare, this case represents accurate surgical management and judgment, especially in the preoperative phase which resulted in early operating and excellent postoperative results. It is our feeling that if the patient can be transferred safely to the operating room the mortality rate is considerably lowered; however, emergency room thoracotomy, which will undoubtedly result in a greater survival rate from these spectacular injuries, should be performed in the emergency center if cardiac activity ceases or the patient's condition deteriorates considerably.

Evaluation of a passive method for determining particle penetration through protective clothing materials.

Science.gov (United States)

Jaques, Peter A; Portnoff, Lee

2017-12-01

because the active method draws air at a constant flow rate regardless of the resistance of the test fabric. The passive method indicated greater sensitivity since penetration decreased in response to the increase in permeability.

Does the Economic Crisis Have an Influence on the Higher Education Dropout Rate?

Science.gov (United States)

Leão Fernandes, Graça; Chagas Lopes, Margarida

2016-01-01

This research aims to identify the effects of the economic crisis on higher education (HE) dropout rates at Lisbon School of Economics and Management (ISEG)--Universidade de Lisboa, after having controlled for individual characteristics, family background, High School and HE trajectories. Our main hypothesis is that the economic crisis induces…

Calm Merino ewes have a higher ovulation rate and more multiple pregnancies than nervous ewes.

Science.gov (United States)

van Lier, E; Hart, K W; Viñoles, C; Paganoni, B; Blache, D

2017-07-01

In 1990, two selection lines of Merino sheep were established for low and high behavioural reactivity (calm and nervous temperament) at the University of Western Australia. Breeding records consistently showed that calm ewes weaned 10% to 19% more lambs than the nervous ewes. We hypothesise that calm ewes could have a higher ovulation rate than nervous ewes and/or calm ewes could have a lower rate of embryo mortality than nervous ewes. We tested these hypotheses by comparing the ovulation rate and the rate of embryo mortality between the calm and nervous lines before and after synchronisation and artificial insemination. Merino ewes from the temperament selection lines (calm, n=100; nervous, n=100) were synchronised (early breeding season) for artificial insemination (day 0) (intravaginal sponges containing fluogestone acetate and eCG immediately after sponge withdrawal). On day-17 and 11 ovarian cyclicity and corpora lutea, and on days 30 and 74 pregnancies and embryos/foetuses were determined by ultrasound. Progesterone, insulin and leptin concentrations were determined in blood plasma samples from days 5, 12 and 17. Ovarian cyclicity before and after oestrus synchronisation did not differ between the lines, but ovulation rate did (day-17: calm 1.63; nervous 1.26; Pewes was higher than on day-17. Loss of embryos by day 30 was high (calm: 71/150; nervous: 68/130); but nervous ewes had a lower proportion (15/47) of multiple pregnancies compared with calm ewes (30/46; Pewes had higher insulin (32.0 pmol/l±1.17 SEM; P=0.013) and lower leptin (1.18 μg/l±0.04 SEM; P=0.002) concentrations than calm ewes (insulin: 27.8 pmol/l±1.17 SEM; leptin: 1.35 μg/l±0.04 SEM). The differences in reproductive outcomes between the calm and nervous ewes were mainly due to a higher ovulation rate in calm ewes. We suggest that reproduction in nervous ewes is compromised by factors leading up to ovulation and conception, or the uterine environment during early pregnancy, that reflect

Network Penetration Testing and Research

Science.gov (United States)

Murphy, Brandon F.

2013-01-01

This paper will focus the on research and testing done on penetrating a network for security purposes. This research will provide the IT security office new methods of attacks across and against a company's network as well as introduce them to new platforms and software that can be used to better assist with protecting against such attacks. Throughout this paper testing and research has been done on two different Linux based operating systems, for attacking and compromising a Windows based host computer. Backtrack 5 and BlackBuntu (Linux based penetration testing operating systems) are two different "attacker'' computers that will attempt to plant viruses and or NASA USRP - Internship Final Report exploits on a host Windows 7 operating system, as well as try to retrieve information from the host. On each Linux OS (Backtrack 5 and BlackBuntu) there is penetration testing software which provides the necessary tools to create exploits that can compromise a windows system as well as other operating systems. This paper will focus on two main methods of deploying exploits 1 onto a host computer in order to retrieve information from a compromised system. One method of deployment for an exploit that was tested is known as a "social engineering" exploit. This type of method requires interaction from unsuspecting user. With this user interaction, a deployed exploit may allow a malicious user to gain access to the unsuspecting user's computer as well as the network that such computer is connected to. Due to more advance security setting and antivirus protection and detection, this method is easily identified and defended against. The second method of exploit deployment is the method mainly focused upon within this paper. This method required extensive research on the best way to compromise a security enabled protected network. Once a network has been compromised, then any and all devices connected to such network has the potential to be compromised as well. With a compromised

Endovascular treatment of penetrating arterial trauma with stent grafts.

Science.gov (United States)

Biagioni, Rodrigo Bruno; Burihan, Marcelo Calil; Nasser, Felipe; Biagioni, Luisa Ciucci; Ingrund, José Carlos

2018-02-01

The endovascular management of arterial injuries has resulted in reduced operating time, blood loss, hospital mortality, lower incidence of sepsis, and decrease in mortality rates. For penetrating trauma, however, the benefits of endovascular therapy are questionable. Data were obtained by retrospective analysis of electronic medical records. All patients with vascular trauma seeking care at our institution from January 2010 to December 2015 were reviewed. A total of 223 vascular trauma patients were enrolled. Of these, 18 patients (8 %) were treated with endovascular techniques. The data related to clinical presentation, patient characteristics, technical aspects of the treatment, and follow-up were analysed. The mean patient age was 35.4 ± 17.8 years, 94 % were male. The mean injury severity score was 10.4 ± 2.5. The most commonly observed trauma mechanism was a gunshot in 10 cases (55 %), followed by lesions provoked by arterial catheter misplacement in five cases (27 %), and stab wounds in three cases (16.6 %). The main injury site was the subclavian artery, accounting for eight cases (44 %), followed by the superficial femoral artery and the tibiofibular trunk in two cases, respectively (18 %). The anterior tibial, fibular artery, axillary, common carotid, superior mesenteric, and profunda femoris were each affected once. Arteriovenous fistula was detected in nine cases (50 %), pseudoaneurysms in nine cases (50 %), and short occlusion in two cases (11 %). The mean follow-up duration was 753 days. The primary patency rate was 92.3 and 61.5 % after one and two years, respectively. The survival rate was 94.4 % after one and two years. Infection of the stents or limb amputations were not identified at follow-up. The endovascular treatment of penetrating arterial injuries with covered stents is feasible. However, the criteria used to choose the best method must be individualized.

Defect creation rates in CdTe irradiated by electrons

International Nuclear Information System (INIS)

Caillot, M.

1978-01-01

Up to now, the defect creation rates in CdTe irradiated by electrons were unknown. They have been calculated for different electron kinetic energies. As the samples studied are thick, the energy loss when the electrons penetrate the material has been taken into account. The cross-sections of Cd and Te displacements vs the depth of electron penetration were determined for different electron kinetic energies, and the defect creation rates obtained for each sublattice. These creation rates have been compared with those deduced from experiments and it was found that the experimental creation rates were lower than the calculated ones. This discrepancy can be explained in terms of creation of neutral Frenkel pairs. (Auth.)

CNS penetration of ART in HIV-infected children

NARCIS (Netherlands)

van den Hof, Malon; Blokhuis, Charlotte; Cohen, Sophie; Scherpbier, Henriette J.; Wit, Ferdinand W. N. M.; Pistorius, M. C. M.; Kootstra, Neeltje A.; Teunissen, Charlotte E.; Mathot, Ron A. A.; Pajkrt, Dasja

2018-01-01

Background: Paediatric data on CNS penetration of antiretroviral drugs are scarce. Objectives: To evaluate CNS penetration of antiretroviral drugs in HIV-infected children and explore associations with neurocognitive function. Patients and methods: Antiretroviral drug levels were measured in paired

Role of ATP-binding cassette and solute carrier transporters in erlotinib CNS penetration and intracellular accumulation.

Science.gov (United States)

Elmeliegy, Mohamed A; Carcaboso, Angel M; Tagen, Michael; Bai, Feng; Stewart, Clinton F

2011-01-01

To study the role of drug transporters in central nervous system (CNS) penetration and cellular accumulation of erlotinib and its metabolite, OSI-420. After oral erlotinib administration to wild-type and ATP-binding cassette (ABC) transporter-knockout mice (Mdr1a/b(-/-), Abcg2(-/-), Mdr1a/b(-/-)Abcg2(-/-), and Abcc4(-/-)), plasma was collected and brain extracellular fluid (ECF) was sampled using intracerebral microdialysis. A pharmacokinetic model was fit to erlotinib and OSI-420 concentration-time data, and brain penetration (P(Brain)) was estimated by the ratio of ECF-to-unbound plasma area under concentration-time curves. Intracellular accumulation of erlotinib was assessed in cells overexpressing human ABC transporters or SLC22A solute carriers. P(Brain) in wild-type mice was 0.27 ± 0.11 and 0.07 ± 0.02 (mean ± SD) for erlotinib and OSI-420, respectively. Erlotinib and OSI-420 P(Brain) in Abcg2(-/-) and Mdr1a/b(-/-)Abcg2(-/-) mice were significantly higher than in wild-type mice. Mdr1a/b(-/-) mice showed similar brain ECF penetration as wild-type mice (0.49 ± 0.37 and 0.04 ± 0.02 for erlotinib and OSI-420, respectively). In vitro, erlotinib and OSI-420 accumulation was significantly lower in cells overexpressing breast cancer resistance protein (BCRP) than in control cells. Only OSI-420, not erlotinib, showed lower accumulation in cells overexpressing P-glycoprotein (P-gp) than in control cells. The P-gp/BCRP inhibitor elacridar increased erlotinib and OSI-420 accumulation in BCRP-overexpressing cells. Erlotinib uptake was higher in OAT3- and OCT2-transfected cells than in empty vector control cells. Abcg2 is the main efflux transporter preventing erlotinib and OSI-420 penetration in mouse brain. Erlotinib and OSI-420 are substrates for SLC22A family members OAT3 and OCT2. Our findings provide a mechanistic basis for erlotinib CNS penetration, cellular uptake, and efflux mechanisms. ©2010 AACR.

Analysis of 178 penetrating stomach and small bowel injuries.

Science.gov (United States)

Salim, Ali; Teixeira, Pedro G R; Inaba, Kenji; Brown, Carlos; Browder, Timothy; Demetriades, Demetrios

2008-03-01

Surgical site infections (SSIs), such as wound infection, fascial dehiscence, and intraabdominal abscess, commonly occur following penetrating abdominal trauma. However, most of the literature involves penetrating colon injuries. There are few reports describing complications following penetrating stomach and small bowel injuries. Based on the hypothesis that SSIs are commonly found following penetrating stomach and small bowel trauma, a prospective observational study was performed at an academic Level I trauma center from March 1, 2004 until August 31, 2006. The subjects were patients who had sustained a penetrating injury to the stomach or small bowel. Patients were followed for the development of an SSI, defined as wound infection, fascial dehiscence, or intraabdominal abscess. A total of 178 patients were admitted with penetrating stomach or small bowel injuries over the 29-month period. There were 121 (68%) gunshot injuries and 57 (32%) stab wounds. Associated intraabdominal injuries occurred in 74% of patients. Overall, SSIs occurred in 20% of cases. Risk factors for SSI included associated duodenal or colon injury, whereas time to operating room, blood loss, and type and duration of antibiotic use were not. When associated colon injuries were excluded, SSIs occurred in 16% of patients with gastric injuries and 13% of those with small bowel injuries. SSIs commonly follow penetrating stomach and small bowel trauma. Risk factors for SSI include associated duodenal or colon injury. Delay to operating room, blood loss, and type and length of antibiotic prophylaxis were not associated with an increased risk of SSI.

NRC Information Notice No. 93-25: Electrical penetration assembly degradation

International Nuclear Information System (INIS)

Grimes, B.K.

1993-01-01

In July 1987 and in October 1989, the licensee for the Trojan Nuclear Plant, the Portland and General Electric Company, reported problems with containment air leakage through its Bunker-Ramo electrical penetration assembly seals. In July and August 1991, the NRC inspected the use of containment electrical penetration assembly seals at Trojan and concluded that the licensee had not established an effective program for trending and evaluating electrical penetration assembly seal leakage. On October 28, 1991, while the plant was in a refueling outage, the licensee reported to the NRC that in the originally installed electrical penetration assemblies, the seal (polyurethane) and lubricant (Celvacen or Glycerin) materials were inappropriate for the application. The licensee concluded that these materials may cause seal degradation and that the seals may become degraded if subjected to design basis accident conditions for moisture or temperature. The licensee replaced the electrical penetration assembly seal with an environmentally qualified ethylene propylene rubber seal and added a silicone rubber backup O-ring to the outer face of each electrical penetration assembly module. The licensee subsequently replaced all the Bunker-Ramo electrical penetration assemblies with Conax assemblies

Mechanistic studies of ocular peptide absorption and its enhancement by various penetration enhancers

International Nuclear Information System (INIS)

Rojanasakul, Y.

1989-01-01

Two major aspects of corneal peptide absorption, namely the transport mechanisms and the promoting effect of some penetration enhancers, were investigated. Studies on transport mechanisms involve (a) identification of transport pathways of peptides across the cornea, (b) determination of rate-limiting barrier(s) for peptide absorption, and (c) permselective properties of the cornea. To study the transport pathways of peptides, four model peptides differing in molecular size and charge were either fluorescently or radioactively labeled and their movement across the cornea was detected by laser scanning confocal microscopy and autoradiography. Results from these studies indicate that peptides can penetrate the cornea via different pathways, depending on the physicochemical properties and membrane specificity of the peptides. In all cases, the outermost layer of the corneal epithelium presents the rate-limiting barrier for peptide absorption. The results also indicate a charge discrimination effect to transport of negatively charged peptides. In permselectivity studies, it has been shown that the cornea, due to the presence of ionizable charged groups, is amphoteric and exhibits dual selective characteristics to transport of charged molecules. At pH's above the isoelectric point, 3.2, the cornea carries a net negative charge and is selective to positively-charged molecules. Below the isoelectric pH, the reverse is valid. The promoting mechanisms of penetration enhancers were studied microscopically using confocal fluorescence microscopy with the aid of a specific fluorescent membrane probe (3,3'-dioctadecyloxacarbocyanine) and a non-permeating polar tracer. All enhancers, including chelators, non-ionic surfactants, bile salts, and cytoskeleton-active agents, significantly increase membrane permeability depending on concentration and exposure time

Spatio-temporal dynamics of the penetration resistance of recultivated soils formed after open cast mining

Directory of Open Access Journals (Sweden)

A. V. Zhukov

2016-01-01

Full Text Available On the basis of studying the spatio-temporal dynamics of soil penetration resistance we proved the existence of the technozem ecomorphs as above horizon soil formations. Research was carried out at a research center for study of recultivation processes in Ordzhonikidze city. Measurement of soils penetration was made in field conditions using an Eijkelkamp penetrometer on a regular grid at depths of up to50 cmwith intervals of5 cm. Calculation of average values and degrees of variation was performed by means of descriptive statistical tools. The extent of soil penetration spatial dependence was assessed and the existence of ecomorphs was proved by means of geostatistical analysis. The degree of associativity of spatial distribution of indicators of a soil body in different years of research was established by means of correlation analysis. The level of variation in space and in time of  technozem penetration generated on loess-like loams, grey-green, red-brown clays, and also pedozems was revealed. The degree of spatial dependence of  technozem penetration within soil layers and also the linear sizes of ecomorphs as above horizon soil structures was established. The time dynamics of  penetration of various recultozems were described. As a result of research into the spatio-temporal dynamics of penetration of technozems, data confirming the hypothesis of the existence of ecomorphs as above horizon morphological soil formations were obtained. An ecomorphic approach to the study of the morphological structure of technozems is proposed. The comparative characteristics of ecomorphs from various types of technozem are presented. The results obtained solve the problem of combining the higher and lowest levels in the hierarchical system of soil organisation as a natural body, which should raise the efficiency of the analysis of relations of morphological elements as a basis for detailed reconstruction of recultivation processes, soil formation, and

Penetration testing with Perl

CERN Document Server

Berdeaux, Douglas

2014-01-01

If you are an expert Perl programmer interested in penetration testing or information security, this guide is designed for you. However, it will also be helpful for you even if you have little or no Linux shell experience.

Standard practice for liquid penetrant examination for general industry

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This practice covers procedures for penetrant examination of materials. Penetrant testing is a nondestructive testing method for detecting discontinuities that are open to the surface such as cracks, seams, laps, cold shuts, shrinkage, laminations, through leaks, or lack of fusion and is applicable to in-process, final, and maintenance testing. It can be effectively used in the examination of nonporous, metallic materials, ferrous and nonferrous metals, and of nonmetallic materials such as nonporous glazed or fully densified ceramics, as well as certain nonporous plastics, and glass. 1.2 This practice also provides a reference: 1.2.1 By which a liquid penetrant examination process recommended or required by individual organizations can be reviewed to ascertain its applicability and completeness. 1.2.2 For use in the preparation of process specifications and procedures dealing with the liquid penetrant testing of parts and materials. Agreement by the customer requesting penetrant inspection is strongly rec...

Integrated computation model of lithium-ion battery subject to nail penetration

International Nuclear Information System (INIS)

Liu, Binghe; Yin, Sha; Xu, Jun

2016-01-01

Highlights: • A coupling model to predict battery penetration process is established. • Penetration test is designed and validates the computational model. • Governing factors of the penetration induced short-circuit is discussed. • Critical safety battery design guidance is suggested. - Abstract: The nail penetration of lithium-ion batteries (LIBs) has become a standard battery safety evaluation method to mimic the potential penetration of a foreign object into LIB, which can lead to internal short circuit with catastrophic consequences, such as thermal runaway, fire, and explosion. To provide a safe, time-efficient, and cost-effective method for studying the nail penetration problem, an integrated computational method that considers the mechanical, electrochemical, and thermal behaviors of the jellyroll was developed using a coupled 3D mechanical model, a 1D battery model, and a short circuit model. The integrated model, along with the sub-models, was validated to agree reasonably well with experimental test data. In addition, a comprehensive quantitative analysis of governing factors, e.g., shapes, sizes, and displacements of nails, states of charge, and penetration speeds, was conducted. The proposed computational framework for LIB nail penetration was first introduced. This framework can provide an accurate prediction of the time history profile of battery voltage, temperature, and mechanical behavior. The factors that affected the behavior of the jellyroll under nail penetration were discussed systematically. Results provide a solid foundation for future in-depth studies on LIB nail penetration mechanisms and safety design.

Generic penetration in the retail antidepressant market.

Science.gov (United States)

Ventimiglia, Jeffrey; Kalali, Amir H

2010-06-01

In this article, we explore the accelerated penetration of generic antidepressants in the United States market following the availability of generic citalopram and sertraline. Analysis suggests that overall, generic penetration into the antidepressant market has grown from approximately 41 percent in January 2004 to over 73 percent in January 2010. Similar trends are uncovered when branded and generic prescriptions are analyzed by specialty.

Quantitative wood–adhesive penetration with X-ray computed tomography

Energy Technology Data Exchange (ETDEWEB)

Paris, Jesse L.; Kamke, Frederick A. (Oregon State U.); (Willamette Valley)

2015-09-01

Micro X-ray computed tomography (XCT) was used to analyze the 3D adhesive penetration behavior of different wood–adhesive bondlines. Three adhesives, a phenol formaldehyde (PF), a polymeric diphenylmethane diisocyanate (pMDI), and a hybrid polyvinyl acetate (PVA), all tagged with iodine for enhanced X-ray attenuation, were used to prepare single-bondline laminates in two softwoods, Douglas-fir and loblolly pine, and one hardwood, a hybrid polar. Adhesive penetration depth was measured with two separate calculations, and results were compared with 2D fluorescent micrographs. A total of 54 XCT scans were collected, representing six replicates of each treatment type; each replicate, however, consisted of approximately 1500 individual, cross-section slices stacked along the specimen length. As these adhesives were highly modified, the presented results do not indicate typical behavior for their broader adhesive classes. Still, clear penetration differences were observed between each adhesive type, and between wood species bonded with both the PF and pMDI adhesives. Furthermore, penetration results depended on the calculation method used. Two adhesive types with noticeably different resin distributions in the cured bondline, showed relatively similar penetration depths when calculated with a traditional effective penetration equation. However, when the same data was calculated with a weighted penetration calculation, which accounts for both adhesive area and depth, the results appeared to better represent the different distributions depicted in the photomicrographs and tomograms. Additionally, individual replicate comparisons showed variation due to specimen anatomy, not easily observed or interpreted from 2D images. Finally, 3D views of segmented 3D adhesive phases offered unique, in-situ views of the cured adhesive structures. In particular, voids formed by CO₂ bubbles generated during pMDI cure were clearly visible in penetrated columns of the solidified

Improving outcomes following penetrating colon wounds: application of a clinical pathway.

Science.gov (United States)

Miller, Preston R; Fabian, Timothy C; Croce, Martin A; Magnotti, Louis J; Elizabeth Pritchard, F; Minard, Gayle; Stewart, Ronald M

2002-06-01

During World War II, failure to treat penetrating colon injuries with diversion could result in court martial. Based on this wartime experience, colostomy for civilian colon wounds became the standard of care for the next 4 decades. Previous work from our institution demonstrated that primary repair was the optimal management for nondestructive colon wounds. Optimal management of destructive wounds requiring resection remains controversial. To address this issue, we performed a study that demonstrated risk factors (pre or intraoperative transfusion requirement of more than 6 units of packed red blood cells, significant comorbid diseases) that were associated with a suture line failure rate of 14%, and of whom 33% died. Based on these outcomes, a clinical pathway for management of destructive colon wounds was developed. The results of the implementation of this pathway are the focus of this report. Patients with penetrating colon injury were identified from the registry of a level I trauma center over a 5-year period. Records were reviewed for demographics, injury characteristics, and outcome. Patients with nondestructive injuries underwent primary repair. Patients with destructive wounds but no comorbidities or large transfusion requirement underwent resection and anastomosis, while patients with destructive wounds and significant medical illness or transfusion requirements of more than 6 units/blood received end colostomy. The current patients (CP) were compared to the previous study (PS) to determine the impact of the clinical pathway. Outcomes examined included colon related mortality and morbidity (suture line leak and abscess). Over a 5.5-year period, 231 patients had penetrating colon wounds. 209 survived more 24 hours and comprise the study population. Primary repair was performed on 153 (73%) patients, and 56 patients had destructive injuries (27%). Of these, 40 (71%) had resection and anastomosis and 16 (29%) had diversion. More destructive injuries were

WAPTT - Web Application Penetration Testing Tool

Directory of Open Access Journals (Sweden)

DURIC, Z.

2014-02-01

Full Text Available Web applications vulnerabilities allow attackers to perform malicious actions that range from gaining unauthorized account access to obtaining sensitive data. The number of reported web application vulnerabilities in last decade is increasing dramatically. The most of vulnerabilities result from improper input validation and sanitization. The most important of these vulnerabilities based on improper input validation and sanitization are: SQL injection (SQLI, Cross-Site Scripting (XSS and Buffer Overflow (BOF. In order to address these vulnerabilities we designed and developed the WAPTT (Web Application Penetration Testing Tool tool - web application penetration testing tool. Unlike other web application penetration testing tools, this tool is modular, and can be easily extended by end-user. In order to improve efficiency of SQLI vulnerability detection, WAPTT uses an efficient algorithm for page similarity detection. The proposed tool showed promising results as compared to six well-known web application scanners in detecting various web application vulnerabilities.

Penetrating power of resonant electromagnetic induction imaging

Directory of Open Access Journals (Sweden)

Roberta Guilizzoni

2016-09-01

Full Text Available The possibility of revealing the presence and identifying the nature of conductive targets is of central interest in many fields, including security, medicine, industry, archaeology and geophysics. In many applications, these targets are shielded by external materials and thus cannot be directly accessed. Hence, interrogation techniques are required that allow penetration through the shielding materials, in order for the target to be identified. Electromagnetic interrogation techniques represent a powerful solution to this challenge, as they enable penetration through conductive shields. In this work, we demonstrate the power of resonant electromagnetic induction imaging to penetrate through metallic shields (1.5-mm-thick and image targets (having conductivities σ ranging from 0.54 to 59.77 MSm−1 concealed behind them.

Neuroimaging in adult penetrating brain injury: a guide for radiographers

International Nuclear Information System (INIS)

Temple, Nikki; Donald, Cortny; Skora, Amanda; Reed, Warren

2015-01-01

Penetrating brain injuries (PBI) are a medical emergency, often resulting in complex damage and high mortality rates. Neuroimaging is essential to evaluate the location and extent of injuries, and to manage them accordingly. Currently, a myriad of imaging modalities are included in the diagnostic workup for adult PBI, including skull radiography, computed tomography (CT), magnetic resonance imaging (MRI) and angiography, with each modality providing their own particular benefits. This literature review explores the current modalities available for investigating PBI and aims to assist in decision making for the appropriate use of diagnostic imaging when presented with an adult PBI. Based on the current literature, the authors have developed an imaging pathway for adult penetrating brain injury that functions as both a learning tool and reference guide for radiographers and other health professionals. Currently, CT is recommended as the imaging modality of choice for the initial assessment of PBI patients, while MRI is important in the sub-acute setting where it aids prognosis prediction and rehabilitation planning, Additional follow-up imaging, such as angiography, should be dependent upon clinical findings

Neuroimaging in adult penetrating brain injury: a guide for radiographers

Energy Technology Data Exchange (ETDEWEB)

Temple, Nikki; Donald, Cortny; Skora, Amanda [Discipline of Medical Radiation Sciences, The University of Sydney, Lidcombe, New South Wales (Australia); Reed, Warren, E-mail: warren.reed@sydney.edu.au [Medical Image Optimisation and Perception Group, Discipline of Medical Radiation Sciences, The University of Sydney, Lidcombe, New South Wales (Australia)

2015-06-15

Penetrating brain injuries (PBI) are a medical emergency, often resulting in complex damage and high mortality rates. Neuroimaging is essential to evaluate the location and extent of injuries, and to manage them accordingly. Currently, a myriad of imaging modalities are included in the diagnostic workup for adult PBI, including skull radiography, computed tomography (CT), magnetic resonance imaging (MRI) and angiography, with each modality providing their own particular benefits. This literature review explores the current modalities available for investigating PBI and aims to assist in decision making for the appropriate use of diagnostic imaging when presented with an adult PBI. Based on the current literature, the authors have developed an imaging pathway for adult penetrating brain injury that functions as both a learning tool and reference guide for radiographers and other health professionals. Currently, CT is recommended as the imaging modality of choice for the initial assessment of PBI patients, while MRI is important in the sub-acute setting where it aids prognosis prediction and rehabilitation planning, Additional follow-up imaging, such as angiography, should be dependent upon clinical findings.

Continuous fermentation and in-situ reed separation of butyric acid for higher sugar consumption rate and productivity

DEFF Research Database (Denmark)

Baroi, George Nabin; Skiadas, Ioannis; Westermann, Peter

that disconnection of the REED system resulted to much lower (48 and 83% for glucose and xylose, respectively) sugars consumption rates and consequently lower butyric acid production rates. It was also noticeable that continuous operation, even without the REED system, resulted to higher glucose consumption rates...

Estimating diversification rates for higher taxa: BAMM can give problematic estimates of rates and rate shifts.

Science.gov (United States)

Meyer, Andreas L S; Wiens, John J

2018-01-01

Estimates of diversification rates are invaluable for many macroevolutionary studies. Recently, an approach called BAMM (Bayesian Analysis of Macro-evolutionary Mixtures) has become widely used for estimating diversification rates and rate shifts. At the same time, several articles have concluded that estimates of net diversification rates from the method-of-moments (MS) estimators are inaccurate. Yet, no studies have compared the ability of these two methods to accurately estimate clade diversification rates. Here, we use simulations to compare their performance. We found that BAMM yielded relatively weak relationships between true and estimated diversification rates. This occurred because BAMM underestimated the number of rates shifts across each tree, and assigned high rates to small clades with low rates. Errors in both speciation and extinction rates contributed to these errors, showing that using BAMM to estimate only speciation rates is also problematic. In contrast, the MS estimators (particularly using stem group ages), yielded stronger relationships between true and estimated diversification rates, by roughly twofold. Furthermore, the MS approach remained relatively accurate when diversification rates were heterogeneous within clades, despite the widespread assumption that it requires constant rates within clades. Overall, we caution that BAMM may be problematic for estimating diversification rates and rate shifts. © 2017 The Author(s). Evolution © 2017 The Society for the Study of Evolution.

Simple Amides of Oleanolic Acid as Effective Penetration Enhancers

Science.gov (United States)

Bednarczyk-Cwynar, Barbara; Partyka, Danuta; Zaprutko, Lucjusz

2015-01-01

Transdermal transport is now becoming one of the most convenient and safe pathways for drug delivery. In some cases it is necessary to use skin penetration enhancers in order to allow for the transdermal transport of drugs that are otherwise insufficiently skin-permeable. A series of oleanolic acid amides as potential transdermal penetration enhancers was formed by multistep synthesis and the synthesis of all newly prepared compounds is presented. The synthetized amides of oleanolic acid were tested for their in vitro penetration promoter activity. The above activity was evaluated by means of using the Fürst method. The relationships between the chemical structure of the studied compounds and penetration activity are presented. PMID:26010090

Simple amides of oleanolic acid as effective penetration enhancers.

Science.gov (United States)

Bednarczyk-Cwynar, Barbara; Partyka, Danuta; Zaprutko, Lucjusz

2015-01-01

Transdermal transport is now becoming one of the most convenient and safe pathways for drug delivery. In some cases it is necessary to use skin penetration enhancers in order to allow for the transdermal transport of drugs that are otherwise insufficiently skin-permeable. A series of oleanolic acid amides as potential transdermal penetration enhancers was formed by multistep synthesis and the synthesis of all newly prepared compounds is presented. The synthetized amides of oleanolic acid were tested for their in vitro penetration promoter activity. The above activity was evaluated by means of using the Fürst method. The relationships between the chemical structure of the studied compounds and penetration activity are presented.

Splenectomy is associated with higher infection and pneumonia rates among trauma laparotomy patients.

Science.gov (United States)

Fair, Kelly A; Connelly, Christopher R; Hart, Kyle D; Schreiber, Martin A; Watters, Jennifer M

2017-05-01

Splenectomy increases lifetime risk of thromboembolism (VTE) and is associated with long-term infectious complications, primarily, overwhelming post-splenectomy infection (OPSI). Our objective was to evaluate risk of VTE and infection at index hospitalization post-splenectomy. Retrospective review of all patients who received a laparotomy in the NTDB. Propensity score matching for splenectomy was performed, based on ISS, abdominal abbreviated injury score >3, GCS, sex and mechanism. Major complications, VTE, and infection rates were compared. Multiple logistic regression models were utilized to evaluate splenectomy-associated complications. 93,221 laparotomies were performed and 17% underwent splenectomy. Multiple logistic regression models did not demonstrate an association between splenectomy and major complications (OR 0.96, 95% CI 0.91-1.03, p = 0.25) or VTE (OR 1.05, 95% CI 0.96-1.14, p = 0.33). Splenectomy was independently associated with infection (OR 1.07, 95% CI 1.00-1.14, p = 0.045). Subgroup analysis of patients with infection demonstrated that splenectomy was most strongly associated with pneumonia (OR 1.41, 95% CI 1.26-1.57, p Splenectomy is not associated with higher overall complication or VTE rates during index hospitalization. However, splenectomy is associated with a higher rate of pneumonia. Copyright © 2017 Elsevier Inc. All rights reserved.

Evaluation of the learning curve of non-penetrating glaucoma surgery.

Science.gov (United States)

Aslan, Fatih; Yuce, Berna; Oztas, Zafer; Ates, Halil

2017-08-11

To evaluate the learning curve of non-penetrating glaucoma surgery (NPGS). The study included 32 eyes of 27 patients' (20 male and 7 female) with medically uncontrolled glaucoma. Non-penetrating glaucoma surgeries performed by trainees under control of an experienced surgeon between 2005 and 2007 at our tertiary referral hospital were evaluated. Residents were separated into two groups. Humanistic training model applied to the one in the first group, he studied with experimental models before performing NPGS. Two residents in the second group performed NPGS after a conventional training model. Surgeries of the residents were recorded on video and intraoperative parameters were scored by the experienced surgeon at the end of the study. Postoperative intraocular pressure, absolute and total success rates were analyzed. In the first group 19 eyes of 16 patients and in the second group 13 eyes of 11 patients had been operated by residents. Intraoperative parameters and complication rates were not statistically significant between groups (p > 0.05, Chi-square). The duration of surgery was 32.7 ± 5.6 min in the first group and 45 ± 3.8 min in the second group. The difference was statistically significant (p < 0.001, Student's t test). Absolute and total success was 68.8 and 93.8% in the first group and 62.5 and 87.5% in the second group, respectively. The difference was not statistically significant. Humanistic and conventional training models under control of an experienced surgeon are safe and effective for senior residents who manage phacoemulsification surgery in routine cataract cases. Senior residents can practice these surgical techniques with reasonable complication rates.

Safety considerations of laser related penetration in LCTR central power stations

International Nuclear Information System (INIS)

Botts, T.E.; Chan, C.K.; Ullman, A.Z.

1976-01-01

The following topics are briefly described: (1) requirements for optical penetration performance, (2) failure sequences in LCTR optical penetrations, (3) thermal stress in optical penetrations, and (4) nonlinear optical effects

Importance Of Penetration Testing For Legacy Operating System

Directory of Open Access Journals (Sweden)

Poorvi Bhatt

2017-12-01

Full Text Available Penetration testing is very important technique to find vulnerabilities in commercial networks. There are various techniques for ethical hacking via penetration testing. This report explains a white hat hacker approach of penetration testing. I have performed this test on private network where three PCs are connected through LAN via switch and without firewall. This network is not connected with Internet. All the PCs have windows operating system. The attacker host has windows server 2003 with Service Pack1 second host has windows XP with Service Pack 2 and third host has windows 2000 with service pack 4.

Magnetic field penetration into superconductors with sharp edges

International Nuclear Information System (INIS)

Zhilichev, Yuriy N.

2003-01-01

The magnetic field and surface currents induced within a superconductor are calculated assuming the field penetrates in it near sharp corners. Rounding the corners is used to keep the field less than a critical value. Analytical formulas for a corner radius are given for a wire of the rectangular cross-section and a cylinder in the external magnetic field. A boundary integral method is used to calculate the boundary of the Meissner domain when the external field penetrates deep into the superconductor. The effect of degree of penetration on the magnetic moment of superconducting cylinders and wires is discussed

Estimating residual life of alloy 600 RPV penetrations

International Nuclear Information System (INIS)

Hunt, E.S.; White, G.A.; Pathania, R.; Arey, M.L.; Whitaker, D.E.

1996-01-01

Primary water stress corrosion cracking (PWSCC) of Alloy 600 penetrations PWR in reactor pressure vessel (RPV) heads has become a significant economic concern worldwide. PWSCC of these penetrations has led to extended maintenance outages, expensive inspections and repairs, and in some cases, replacement of the entire vessel head. This paper describes methodology developed to predict the remaining life of Alloy 600 penetrations in reactor vessel heads. Predictions of remaining life are an important input to planning models used by utilities to select a strategy for responding to the PWSCC issue at the lowest life cycle cost with an acceptably low risk of leakage. The remaining life of RPV penetrations is determined using the results of inspections of penetrations and statistical methods to predict future degradation. The analysis takes into account the effects of material properties, welding residual stresses, and operating temperature on PWSCC initiation and growth. The probability of developing cracks of various depths is assessed using Monte Carlo methods which provide for uncertainties in the input assumptions. For plants which have not yet performed inspections, remaining life predictions are based on inspection results from similar plants which have performed inspections with corrections made for known differences in design details, material properties and operating conditions

Dynamic hole closure behind a deep ocean sediment penetrator

International Nuclear Information System (INIS)

Dzwilewski, P.T.; Karnes, C.H.

1982-01-01

A freefall or boosted penetrator is one concept being considered to dispose of nuclear waste in the deep ocean seabed. For this technique to be acceptable, the sediment must be an effective barrier to the migration of radioactive nuclides, which means that the hole behind the advancing penetrator must close. One mechanism which can cause the hole to close immediately behind the penetrator is the reduction in water pressure in the wake as water tries to follow the penetrator into the sediment. An approximate solution to this complex problem is presented which analyzes the deformation of the sediment with a nonlinear, large displacement and strain, Lagrangian finite-difference computer code (STEALTH). The water was treated by Bernoulli's Principle for flow in a pipe resulting in a pressure boundary condition applied to the sediment surface along the path after passage of the penetrator. Two one-dimensional and eight two-dimensional calculations were performed with various penetrator velocities (15, 30, and 60 m/s) and sediment shear strengths. In two of the calculations, the dynamic pressure reduction was neglected to see if geostatic stresses alone would close the hole. The results of this study showed that geostatic stresses alone would not close the hole but the dynamic pressure reduction would. The largest uncertainty in the analysis was the pressure conditions in the water behind the penetrator in which frictionless, steady-state flow, in a uniform diameter pipe was assumed. A more sophisticated and realistic pressure condition has been formulated and will be implemented in the computer code in the near future

Non-operative management for penetrating splenic trauma : how far can we go to save splenic function?

NARCIS (Netherlands)

Spijkerman, Roy; Teuben, Michel Paul Johan; Hoosain, Fatima; Taylor, Liezel Phyllis; Hardcastle, Timothy Craig; Blokhuis, Taco Johan; Warren, Brian Leigh; Leenen, Luke Petrus Hendrikus

2017-01-01

BACKGROUND: Selective non-operative management (NOM) for the treatment of blunt splenic trauma is safe. Currently, the feasibility of selective NOM for penetrating splenic injury (PSI) is unclear. Unfortunately, little is known about the success rate of spleen-preserving surgical procedures. The aim

Storability evaluation of Golab apple with acoustic and penetration methods

Directory of Open Access Journals (Sweden)

M. R Bayati

2016-04-01

.26%, 4.11%, 14% and 40% respectively higher compared to other apples. Due to the more tangible acoustic parameters changes, especially acoustic index and modulus of elasticity (having the more slope than the penetration firmness. One could use acoustic tests for more accurate evaluation of apples firmness and quality changes. Finding correlation between acoustic parameters and penetration parameter showed that, correlation between acoustic parameters in each case is greater than correlation between these parameters with penetration parameter.

Effect of fluid penetration on tensile failure during fracturing of an open-hole wellbore

Science.gov (United States)

Zeng, Fanhui; Cheng, Xiaozhao; Guo, Jianchun; Chen, Zhangxin; Tao, Liang; Liu, Xiaohua; Jiang, Qifeng; Xiang, Jianhua

2018-06-01

It is widely accepted that a fracture can be induced at a wellbore surface when the fluid pressure overcomes the rock tensile strength. However, few models of this phenomenon account for the fluid penetration effect. A rock is a typical permeable, porous medium, and the transmission of pressure from a wellbore to the surrounding rock temporally and spatially perturbs the effective stresses. In addition, these induced stresses influence the fracture initiation pressure. To gain a better understanding of the penetration effect on the initiation pressure of a permeable formation, a comprehensive formula is presented to study the effects of the in situ stresses, rock mechanical properties, injection rate, rock permeability, fluid viscosity, fluid compressibility and wellbore size on the magnitude of the initiation pressure during fracturing of an open-hole wellbore. In this context, the penetration effect is treated as a consequence of the interaction among these parameters by using Darcy’s law of radial flow. A fully coupled analytical procedure is developed to show how the fracturing fluid infiltrates the rock around the wellbore and considerably reduces the magnitude of the initiation pressure. Moreover, the calculation results are validated by hydraulic fracturing experiments in hydrostone. An exhaustive sensitivity study is performed, indicating that the local fluid pressure induced from a seepage effect strongly influences the fracture evolution. For permeable reservoirs, a low injection rate and a low viscosity of the injected fluid have a significant impact on the fracture initiation pressure. In this case, the Hubbert and Haimson equations to predict the fracture initiation pressure are not valid. The open-hole fracture initiation pressure increases with the fracturing fluid viscosity and fluid compressibility, while it decreases as the rock permeability, injection rate and wellbore size increase.

Replica scale modelling of long rod tank penetrators

NARCIS (Netherlands)

Diederen, A.M.; Hoeneveld, J.C.

2001-01-01

Experiments and simulations have been conducted using scale size tungsten alloy penetrators at ordnance velocity against an oblique plate array consisting of an inert sandwich and a base armour. The penetrators are made from 2 types of tungsten alloy with different tensile strength. Two scale sizes

The Impact of IPv6 on Penetration Testing

NARCIS (Netherlands)

Ottow, Christiaan; van Vliet, Frank; de Boer, Pieter-Tjerk; Pras, Aiko

In this paper we discuss the impact the use of IPv6 has on remote penetration testing of servers and web applications. Several modifications to the penetration testing process are proposed to accommodate IPv6. Among these modifications are ways of performing fragmentation attacks, host discovery and

Brain processing of visual stimuli representing sexual penetration versus core and animal-reminder disgust in women with lifelong vaginismus.

Science.gov (United States)

Borg, Charmaine; Georgiadis, Janniko R; Renken, Remco J; Spoelstra, Symen K; Weijmar Schultz, Willibrord; de Jong, Peter J

2014-01-01

It has been proposed that disgust evolved to protect humans from contamination. Through eliciting the overwhelming urge to withdraw from the disgusting stimuli, it would facilitate avoidance of contact with pathogens. The physical proximity implied in sexual intercourse provides ample opportunity for contamination and may thus set the stage for eliciting pathogen disgust. Building on this, it has been argued that the involuntary muscle contraction characteristic of vaginismus (i.e., inability to have vaginal penetration) may be elicited by the prospect of penetration by potential contaminants. To further investigate this disgust-based interpretation of vaginismus (in DSM-5 classified as a Genito-Pelvic Pain/Penetration Disorder, GPPPD) we used functional magnetic resonance imaging (fMRI) to examine if women with vaginismus (n = 21) show relatively strong convergence in their brain responses towards sexual penetration- and disgust-related pictures compared to sexually asymptomatic women (n = 21) and women suffering from vulvar pain (dyspareunia/also classified as GPPPD in the DSM-5, n = 21). At the subjective level, both clinical groups rated penetration stimuli as more disgusting than asymptomatic women. However, the brain responses to penetration stimuli did not differ between groups. In addition, there was considerable conjoint brain activity in response to penetration and disgust pictures, which yield for both animal-reminder (e.g., mutilation) and core (e.g., rotten food) disgust domains. However, this overlap in brain activation was similar for all groups. A possible explanation for the lack of vaginismus-specific brain responses lies in the alleged female ambiguity (procreation/pleasure vs. contamination/disgust) toward penetration: generally in women a (default) disgust response tendency may prevail in the absence of sexual readiness. Accordingly, a critical next step would be to examine the processing of penetration stimuli following the

Brain processing of visual stimuli representing sexual penetration versus core and animal-reminder disgust in women with lifelong vaginismus.

Directory of Open Access Journals (Sweden)

Charmaine Borg

Full Text Available It has been proposed that disgust evolved to protect humans from contamination. Through eliciting the overwhelming urge to withdraw from the disgusting stimuli, it would facilitate avoidance of contact with pathogens. The physical proximity implied in sexual intercourse provides ample opportunity for contamination and may thus set the stage for eliciting pathogen disgust. Building on this, it has been argued that the involuntary muscle contraction characteristic of vaginismus (i.e., inability to have vaginal penetration may be elicited by the prospect of penetration by potential contaminants. To further investigate this disgust-based interpretation of vaginismus (in DSM-5 classified as a Genito-Pelvic Pain/Penetration Disorder, GPPPD we used functional magnetic resonance imaging (fMRI to examine if women with vaginismus (n = 21 show relatively strong convergence in their brain responses towards sexual penetration- and disgust-related pictures compared to sexually asymptomatic women (n = 21 and women suffering from vulvar pain (dyspareunia/also classified as GPPPD in the DSM-5, n = 21. At the subjective level, both clinical groups rated penetration stimuli as more disgusting than asymptomatic women. However, the brain responses to penetration stimuli did not differ between groups. In addition, there was considerable conjoint brain activity in response to penetration and disgust pictures, which yield for both animal-reminder (e.g., mutilation and core (e.g., rotten food disgust domains. However, this overlap in brain activation was similar for all groups. A possible explanation for the lack of vaginismus-specific brain responses lies in the alleged female ambiguity (procreation/pleasure vs. contamination/disgust toward penetration: generally in women a (default disgust response tendency may prevail in the absence of sexual readiness. Accordingly, a critical next step would be to examine the processing of penetration stimuli following

Brain Processing of Visual Stimuli Representing Sexual Penetration versus Core and Animal-Reminder Disgust in Women with Lifelong Vaginismus

Science.gov (United States)

Borg, Charmaine; Georgiadis, Janniko R.; Renken, Remco J.; Spoelstra, Symen K.; Weijmar Schultz, Willibrord; de Jong, Peter J.

2014-01-01

It has been proposed that disgust evolved to protect humans from contamination. Through eliciting the overwhelming urge to withdraw from the disgusting stimuli, it would facilitate avoidance of contact with pathogens. The physical proximity implied in sexual intercourse provides ample opportunity for contamination and may thus set the stage for eliciting pathogen disgust. Building on this, it has been argued that the involuntary muscle contraction characteristic of vaginismus (i.e., inability to have vaginal penetration) may be elicited by the prospect of penetration by potential contaminants. To further investigate this disgust-based interpretation of vaginismus (in DSM-5 classified as a Genito-Pelvic Pain/Penetration Disorder, GPPPD) we used functional magnetic resonance imaging (fMRI) to examine if women with vaginismus (n = 21) show relatively strong convergence in their brain responses towards sexual penetration- and disgust-related pictures compared to sexually asymptomatic women (n = 21) and women suffering from vulvar pain (dyspareunia/also classified as GPPPD in the DSM-5, n = 21). At the subjective level, both clinical groups rated penetration stimuli as more disgusting than asymptomatic women. However, the brain responses to penetration stimuli did not differ between groups. In addition, there was considerable conjoint brain activity in response to penetration and disgust pictures, which yield for both animal-reminder (e.g., mutilation) and core (e.g., rotten food) disgust domains. However, this overlap in brain activation was similar for all groups. A possible explanation for the lack of vaginismus-specific brain responses lies in the alleged female ambiguity (procreation/pleasure vs. contamination/disgust) toward penetration: generally in women a (default) disgust response tendency may prevail in the absence of sexual readiness. Accordingly, a critical next step would be to examine the processing of penetration stimuli following the

Conditions for plasmoid penetration across abrupt magnetic barriers

International Nuclear Information System (INIS)

Brenning, Nils; Hurtig, Tomas; Raadu, Michael A.

2005-01-01

The penetration of plasma clouds, or plasmoids, across abrupt magnetic barriers (of the scale less than a few ion gyro radii, using the plasmoid directed velocity) is studied. The insight gained earlier, from detailed experimental and computer simulation investigations of a case study, is generalized into other parameter regimes. It is concluded for what parameters a plasmoid should be expected to penetrate the magnetic barrier through self-polarization, penetrate through magnetic expulsion, or be rejected from the barrier. The scaling parameters are n e , v 0 , B perpendicular , m i , T i , and the width w of the plasmoid. The scaling is based on a model for strongly driven, nonlinear magnetic field diffusion into a plasma which is a generalization of the earlier laboratory findings. The results are applied to experiments earlier reported in the literature, and also to the proposed application of impulsive penetration of plasmoids from the solar wind into the Earth's magnetosphere

Potential for containment leak paths through electrical penetration assemblies under severe accident conditions. [PWR; BWR

Energy Technology Data Exchange (ETDEWEB)

Sebrell, W.

1983-07-01

The leakage behavior of containments beyond design conditions and knowledge of failure modes is required for evaluation of mitigation strategies for severe accidents, risk studies, emergency preparedness planning, and siting. These studies are directed towards assessing the risk and consequences of severe accidents. An accident sequence analysis conducted on a Boiling Water Reactor (BWR), Mark I (MK I), indicated very high temperatures in the dry-well region, which is the location of the majority of electrical penetration assemblies. Because of the high temperatures, it was postulated in the ORNL study that the sealants would fail and all the electrical penetration assemblies would leak before structural failure would occur. Since other containments had similar electrical penetration assemblies, it was concluded that all containments would experience the same type of failure. The results of this study, however, show that this conclusion does not hold for PWRs because in the worst accident sequence, the long time containment gases stabilize to 350/sup 0/F. BWRs, on the other hand, do experience high dry-well temperatures and have a higher potential for leakage.

Hybrid treatment of penetrating aortic ulcer

International Nuclear Information System (INIS)

Lara, Juan Antonio Herrero; Martins-Romeo, Daniela de Araujo; Escudero, Carlos Caparros; Falcon, Maria del Carmen Prieto; Batista, Vinicius Bianchi; Vazquez, Rosa Maria Lepe

2015-01-01

Penetrating atherosclerotic aortic ulcer is a rare entity with poor prognosis in the setting of acute aortic syndrome. In the literature, cases like the present one, located in the aortic arch, starting with chest pain and evolving with dysphonia, are even rarer. The present report emphasizes the role played by computed tomography in the diagnosis of penetrating atherosclerotic ulcer as well as in the differentiation of this condition from other acute aortic syndromes. Additionally, the authors describe a new therapeutic approach represented by a hybrid endovascular surgical procedure for treatment of the disease. (author)

Hybrid treatment of penetrating aortic ulcer

Energy Technology Data Exchange (ETDEWEB)

Lara, Juan Antonio Herrero; Martins-Romeo, Daniela de Araujo; Escudero, Carlos Caparros; Falcon, Maria del Carmen Prieto; Batista, Vinicius Bianchi, E-mail: jaherrero5@hotmail.com [Unidade de Gestao Clinica (UGC) de Diagnostico por Imagem - Hosppital Universitario Virgen Macarena, Sevilha (Spain); Vazquez, Rosa Maria Lepe [Unit of Radiodiagnosis - Hospital Nuestra Senora de la Merced, Osuna, Sevilha (Spain)

2015-05-15

Penetrating atherosclerotic aortic ulcer is a rare entity with poor prognosis in the setting of acute aortic syndrome. In the literature, cases like the present one, located in the aortic arch, starting with chest pain and evolving with dysphonia, are even rarer. The present report emphasizes the role played by computed tomography in the diagnosis of penetrating atherosclerotic ulcer as well as in the differentiation of this condition from other acute aortic syndromes. Additionally, the authors describe a new therapeutic approach represented by a hybrid endovascular surgical procedure for treatment of the disease. (author)

The effect of steam curing on chloride penetration in geopolymer concrete

Directory of Open Access Journals (Sweden)

Jaya Ekaputri Januarti

2017-01-01

Full Text Available In this paper, we present the result of our study on the effect of steam curing to chloride ion penetration in geopolymer concrete. Class F fly ash was activated using sodium hydroxide (NaOH and sodium silicate (Na2SiO3. The concrete specimens were then steam-cured at 40°C, 60°C, 80°C and room temperature at 24 hours. The treatment was followed by wet curing for 28 days, and then followed by immersion of all specimens in salt water for the durations of 30, 60, and 90 days. Cylindrical specimens were then prepared for compressive strength, chloride ion penetration, pH, and porosity tests. A 16 mm-steel bar was fixed at the center of the specimen concrete blocks (specimen size: 10cm × 10cm × 15cm. Corrosion probability was determined by conducting Half Cell Potential test. Our result showed that increasing the curing temperature to 80°C induced chloride ion penetration into the concrete’s effective pores, despite improvements in compressive strength. We also found that chloride ingress on the geopolymer concrete increases commensurately with the increase of the curing temperature. The corrosion potential measurement of geopolymer concrete was higher than OPC concrete even if corrosion was not observed in reinforcing. Based on our result, we suggest that the corrosion categorization for geopolymer concretes needs to be adjusted.

Outcome of penetrating chest injuries in an urban level I trauma center in the Netherlands.

Science.gov (United States)

Heus, C; Mellema, J J; Giannakopoulos, G F; Zuidema, W P

2015-04-25

Most patients with penetrating chest injuries benefit from early treatment with chest tube drainage or surgery. Although penetrating chest injury is not uncommon, few descriptive studies are published, especially in Europe. The aim of this study was to review our experience and further improve our management of penetrating chest injuries in a level I trauma center in the Netherlands. All patients with penetrating chest injury between August 2004 and December 2012 were included. Demographics, mechanism of injury, physiological parameters, Injury Severity Scores (ISS), surgical and non-surgical treatment, length of intensive care unit (ICU) stay, length of hospital stay (LOS), complications and rate of mortality were collected. A total of 159 patients were analyzed. Patients included 116 (73 %) stab wounds and 34 (21 %) gunshot wounds. In 27 patients (17 %), cardiac injury was seen. The mean ISS was 12. Almost half of all patients (49 %) were treated with only chest tube drainage. Alternatively, surgical treatment was performed in 24 % of all cases. Anterolateral incision was most frequently used to gain access to the thoracic cavity. The mean LOS was 9 days. Among all patients, 17 % were admitted to the ICU with a mean stay of 3 days. In 18 (11 %) patients, one or more complications occurred. The 30-day mortality was 7.5 %. Patients presenting with penetrating chest injury are not uncommon in the Netherlands and can mostly be treated conservatively. In one-fourth of the patients, surgical treatment is performed. A structural and vigorous approach is needed for good clinical outcome.

Prospective Life Cycle Assessment of the Increased Electricity Demand Associated with the Penetration of Electric Vehicles in Spain

Directory of Open Access Journals (Sweden)

Zaira Navas-Anguita

2018-05-01

Full Text Available The penetration of electric vehicles (EV seems to be a forthcoming reality in the transport sector worldwide, involving significant increases in electricity demand. However, many countries such as Spain have not yet set binding policy targets in this regard. When compared to a business-as-usual situation, this work evaluates the life-cycle consequences of the increased electricity demand of the Spanish road transport technology mix until 2050. This is done by combining Life Cycle Assessment and Energy Systems Modelling under three alternative scenarios based on the low, medium, or high penetration rate of EV. In all cases, EV deployment is found to involve a relatively small percentage (<4% of the final electricity demand. Wind power and waste-to-energy plants arise as the main technologies responsible for meeting the increased electricity demand associated with EV penetration. When considering a high market penetration (20 million EV by 2050, the highest annual impacts potentially caused by the additional electricity demand are 0.93 Mt CO2 eq, 0.25 kDALY, and 30.34 PJ in terms of climate change, human health, and resources, respectively. Overall, EV penetration is concluded to slightly affect the national power generation sector, whereas it could dramatically reduce the life-cycle impacts associated with conventional transport.

Use of Sengstaken-Blakemore intrahepatic balloon: an alternative for liver-penetrating injuries.

Science.gov (United States)

Fraga, Gustavo Pereira; Zago, Thiago Messias; Pereira, Bruno Monteiro; Calderan, Thiago Rodrigues Araujo; Silveira, Henrique Jose Virgili

2012-09-01

Severe lesions in the liver are associated with a high mortality rate. Alternative surgical techniques such as the use of an intrahepatic balloon may be effective and reduce mortality in severe hepatic lesions. This study aimed to demonstrate the experience of a university hospital in the use of the Sengstaken-Blakemore balloon in patients with transfixing penetrating hepatic injury as an alternative way to treat these challenging injuries. A retrospective study based on the trauma registry of a university hospital was performed. All patients admitted with hepatic penetrating injuries and treated with the Sengstaken-Blakemore balloon within the period 1990-2010 were reviewed. Forty-six patients with transfixing hepatic injuries were treated with the Sengstaken-Blakemore balloon in the study period. The most frequent cause of injury was gunshot wound (87 % of the patients). The mean trauma scores on admission were Revised Trauma Score (RTS) = 7.12 ± 1.46, Injury Severity Score (ISS) = 22.4 ± 9.7, and Abdominal Trauma Index (ATI) = 19.5 ± 11. According to the severity of the hepatic trauma, 71.8 % of patients had grade III, 23.9 % grade IV, and 4.3 % grade V injuries. Associated abdominal injuries were found in 89.1 % of the patients. The most frequent liver-related complications were hepatic abscess postoperative bleeding (8.6 %), biliary fistula (8.6 %), (4.3 %), and biliary peritonitis (2.1 %). Surgical reintervention was necessary in 14 patients (31.1 %). From those 14, only 3 had the balloon removed. The overall morbidity and mortality rates were 56.5 % and 23.9 % (11 patients), respectively. The knowledge of alternative surgical techniques is essential in improving survival in patients with severe penetrating hepatic injuries. The use of intrahepatic balloon is a viable surgical strategy.

Videofluoroscopic Predictors of Penetration-Aspiration in Parkinson's Disease Patients.

Science.gov (United States)

Argolo, Natalie; Sampaio, Marília; Pinho, Patrícia; Melo, Ailton; Nóbrega, Ana Caline

2015-12-01

Parkinson's disease (PD) patients show a high prevalence of swallowing disorders and tracheal aspiration of food. The videofluoroscopic study of swallowing (VFSS) allows clinicians to visualize the visuoperceptual and temporal parameters associated with swallowing disorders in an attempt to predict aspiration risk. However, this subject remains understudied in PD populations. Our aim was to identify the predictors of penetration-aspiration in PD patients using the VFSS. Consecutive patients were evaluated using VFSS with different consistencies and volumes of food. A speech-language pathologist measured the type of intra-oral bolus organization, loss of bolus control, bolus location at the initiation of the pharyngeal swallow, the presence of multiple swallows, piecemeal deglutition, bolus residue in the pharyngeal recesses and temporal measures. Scores ≥3 on the penetration-aspiration scale (PAS) indicated the occurrence of penetration-aspiration. Using logistic marginal regression, we found that residue in the vallecula, residue in the upper esophageal sphincter and piecemeal deglutition were associated with penetration-aspiration (odds ratio (OR) = 4.09, 2.87 and 3.83; P = 0.0040, 0.0071 and 0.0009, respectively). Penetration/aspiration occurred only with fluids (both of thin and thick consistency), and no significant differences were observed between fluid types or food volumes. The mechanisms underlying dysphagia and penetration/aspiration in PD patients and indications for further studies are discussed.

Hydrogen isotope in erbium oxide: Adsorption, penetration, diffusion, and vacancy trapping

Energy Technology Data Exchange (ETDEWEB)

Mao, Wei, E-mail: mao@nuclear.jp [Department of Nuclear Engineering and Management, School of Engineering, The University of Tokyo, 2-11-16 Yayoi, Bunkyo-ku, Tokyo 113-8656 (Japan); The University Museum, The University of Tokyo, 2-11-16 Yayoi, Bunkyo-ku, Tokyo 113-0032 (Japan); Chikada, Takumi [Department of Chemistry, Graduate School of Science, Shizuoka University, 836 Ohya, Suruga-ku, Shizuoka 422-8529 (Japan); Suzuki, Akihiro [Nuclear Professional School, School of Engineering, The University of Tokyo, 2-22, Shirakata-shirane, Tokai, Naka 319-1188, Ibaraki (Japan); Terai, Takayuki [Department of Nuclear Engineering and Management, School of Engineering, The University of Tokyo, 2-11-16 Yayoi, Bunkyo-ku, Tokyo 113-8656 (Japan); Matsuzaki, Hiroyuki [The University Museum, The University of Tokyo, 2-11-16 Yayoi, Bunkyo-ku, Tokyo 113-0032 (Japan)

2015-03-15

Highlights: • H adsorption on cubic Er{sub 2}O{sub 3} surface results in electron transfer from H to the surface. • The H penetration energy of at least 1.6 eV is required for cubic Er{sub 2}O{sub 3} surface. • The dominated mechanisms of H diffusion in bulk Er{sub 2}O{sub 3} are elucidated. • H diffusion near or at vacancies in Er{sub 2}O{sub 3} is an exothermic reaction. - Abstract: In this study, we report results using first-principles density functional theory calculations for four critical aspects of the interaction: H adsorption on Er{sub 2}O{sub 3} surface, surface-to-subsurface penetration of H into Er{sub 2}O{sub 3}, bulk diffusion of H in Er{sub 2}O{sub 3}, and trapping of H at vacancies. We identify surface stable adsorption positions and find that H prefers to transfer electrons to the surfaces and form covalent bonds with the nearest neighboring four oxygen atoms. For low surface coverage of H as in our case (0.89 × 10{sup 14} H/cm{sup 2}), a penetration energy of at least 1.60 eV is required for cubic Er{sub 2}O{sub 3} surfaces. Further, the H diffusion barrier between the planes defined by Er{sub 2}O{sub 3} units along the favorable <1 1 1> direction is found to be very small – 0.16 eV – whereas higher barriers of 0.41 eV and 1.64 eV are required for diffusion across the planes, somewhat higher than the diffusion energy barrier of 0.20 eV observed experimentally at 873 K. In addition, we predict that interstitial H is exothermically trapped when it approaches a vacancy with the vacancy defect behaving as an electron trap since the H-vacancy defect is found to be more stable than the intrinsic defect.

Higher Magnitude Cash Payments Improve Research Follow-up Rates Without Increasing Drug Use or Perceived Coercion

Science.gov (United States)

Festinger, David S.; Marlowe, Douglas B.; Dugosh, Karen L.; Croft, Jason R.; Arabia, Patricia L.

2008-01-01

In a prior study (Festinger et al., 2005) we found that neither the mode (cash vs. gift card) nor magnitude ($10, $40, or $70) of research follow-up payments increased rates of new drug use or perceptions of coercion. However, higher payments and payments in cash were associated with better follow-up attendance, reduced tracking efforts, and improved participant satisfaction with the study. The present study extended those findings to higher payment magnitudes. Participants from an urban outpatient substance abuse treatment program were randomly assigned to receive $70, $100, $130, or $160 in either cash or a gift card for completing a follow-up assessment at 6 months post-admission (n ≅ 50 per cell). Apart from the payment incentives, all participants received a standardized, minimal platform of follow-up efforts. Findings revealed that neither the magnitude nor mode of payment had a significant effect on new drug use or perceived coercion. Consistent with our previous findings, higher payments and cash payments resulted in significantly higher follow-up rates and fewer tracking calls. In addition participants receiving cash vs. gift cards were more likely to use their payments for essential, non-luxury purchases. Follow-up rates for participants receiving cash payments of $100, $130, and $160 approached or exceeded the FDA required minimum of 70% for studies to be considered in evaluations of new medications. This suggests that the use of higher magnitude payments and cash payments may be effective strategies for obtaining more representative follow-up samples without increasing new drug use or perceptions of coercion. PMID:18395365

Penetrating Cardiac and Hepatic Injury; Polytrauma of a Child After Bombing

Directory of Open Access Journals (Sweden)

Baris Akca

2013-10-01

Full Text Available After a bombing attack, patients were brought into hospital suffering from a combination of injuries caused by the blast, penetrating injuries and burns which as a case of polytrauma. In penetrating thoracoabdominal injuries due to bombing possibility of cardiac injury should be kept in mind. Penetrating cardiac injuries in children are rare but has a high mortality and morbidity. In some cases there may be difficulty in diagnosis of penetrating cardiac injury. In this case we want to share the diagnosis, treatment and follow-up processes of penetrating cardiac and hepatic injury with burns of a politrauma child due to bombing.

Cutaneous mucormycosis secondary to penetrative trauma.

Science.gov (United States)

Zahoor, Bilal; Kent, Stephen; Wall, Daryl

2016-07-01

Mucormycosis is a rare but serious sequelae of penetrating trauma [1-5]. In spite of aggressive management, mortality remains high due to dissemination of infection. We completed a review of literature to determine the most optimal treatment of cutaneous mucormycosis which occurs secondary to penetrating trauma. We completed a review regarding the management of mucormycosis in trauma patients. We selected a total of 36 reports, of which 18 were case-based, for review. Surgical debridement is a primary predictor of improved outcomes in the treatment of mucormycosis [3,6,7]. Anti-fungal therapy, especially lipid soluble formulation of Amphotericin B, is helpful as an adjunct or when surgical debridement has been maximally achieved. Further research is needed to fully evaluate the impact of topical dressings; negative pressure wound therapy is helpful. An aggressive and early surgical approach, even at the expense of disfigurement, is necessary to reduce mortality in the setting of cutaneous mucormycosis that results from penetrating trauma [4,8,9]. Anti-fungal therapy and negative pressure wound therapy are formidable adjuncts. Copyright © 2016 Elsevier Ltd. All rights reserved.

Penetration of 38% hydrogen peroxide into the pulp chamber in bovine and human teeth submitted to office bleach technique.

Science.gov (United States)

Camargo, Samira Esteves Afonso; Valera, Marcia Carneiro; Camargo, Carlos Henrique Ribeiro; Gasparoto Mancini, Maria Nadir; Menezes, Marcia Maciel

2007-09-01

This study evaluated the pulp chamber penetration of peroxide bleaching agent in human and bovine teeth after office bleach technique. All the teeth were sectioned 3 mm apical of the cement-enamel junction and were divided into 2 groups, A (70 third human molars) and B (70 bovine lateral incisors), that were subdivided into A1 and B1 restored by using composite resin, A2 and B2 by using glass ionomer cement, and A3 and B3 by using resin-modified glass ionomer cement; A4, A5, B4, and B5 were not restored. Acetate buffer was placed in the pulp chamber, and the bleaching agent was applied for 40 minutes as follows: A1-A4 and B1-B4, 38% hydrogen peroxide exposure and A5 and B5, immersion into distilled water. The buffer solution was transferred to a glass tube in which leuco crystal violet and horseradish peroxidase were added, producing a blue solution. The optical density of the blue solution was determined by spectrophotometer and converted into microgram equivalents of hydrogen peroxide. Data were submitted to analysis of variance and Dunnett, Kruskal-Wallis, and Tukey tests (5%). A higher level of hydrogen peroxide penetrated into the pulp chamber in resin-modified glass ionomer cements in bovine (0.79 +/- 0.61 microg) and human (2.27 +/- 0.41 microg) groups. The bleaching agent penetration into the pulp chamber was higher in human teeth for any experimental situation. The penetration of the hydrogen peroxide depends on restorative materials, and under the conditions of this study human teeth are more susceptible to penetration of bleaching agent into the pulp chamber than bovine teeth.

Instabilities of higher dimensional compactifications

International Nuclear Information System (INIS)

Accetta, F.S.

1987-02-01

Various schemes for cosmological compactification of higher dimensional theories are considered. Possible instabilities which drive the ground state with static internal space to de Sitter-like expansion of all dimensions are discussed. These instabilities are due to semiclassical barrier penetration and classical thermal fluctuations. For the case of the ten dimensional Chapline-Manton action, it is possible to avoid such difficulties by balancing one-loop Casimir corrections against monopole contributions from the field strength H/sub MNP/ and fermionic condensates. 10 refs

Wireless Network Penetration Testing and Security Auditing

Directory of Open Access Journals (Sweden)

Wang Shao-Long

2016-01-01

Full Text Available IEEE802.11 wireless wireless networks have security issues that are vulnerable to a variety of attacks. Due to using radio to transport data, attackers can bypass firewalls, sniff sensitive information, intercept packets and send malicious packets. Security auditing and penetration testing is expected to ensure wireless networks security. The contributions of this work are analyzed the vulnerability and types of attacks pertaining to IEEE 802.11 WLAN, performed well known attacks in a laboratory environment to conduct penetration tests to confirm whether our wireless network is hackable or not. WAIDPS is configured as auditing tool to view wireless attacks, such as WEP/WPA/WPA2 cracking, rouge access points, denial of service attack. WAIDPS is designed to detect wireless intrusion with additional features. Penetration testing and auditing will mitigate the risk and threatening to protect WALN.

Penetrating chest injury: A miraculous life salvage

Directory of Open Access Journals (Sweden)

Santosh B Dalavi

2013-01-01

Full Text Available An unusual penetrating chest injury was caused by high velocity road traffic accident. An 18-year-old had a four wheeler accident and was brought in emergency department with a ′bamboo′ stick on the left side chest exiting through back. After the stabilization of vital parameters, an inter-costal tube drainage was done on the left side. Except the minor brochopleural fistula which healed by 10 th day, his recovery was uneventful. The outcome was consistent with current aggressive management of penetrating chest injuries. Management of penetrating chest injury involving pulmonary trauma is based on three principles. One is stabilization of hemodynamics of patient with proper clinical evaluation. Second, a mere intercostal tube drainage sufficient for majority of the cases. Third, post-operative active as well as passive physiotherapy is necessary for speedy recovery.

Parametric wave penetration through an overdense plasma layer

International Nuclear Information System (INIS)

Gradov, O.M.; Suender, D.

1981-01-01

The nonlinear penetration of an electromagnetic wave through an overdense plasma layer due to the excitation of parametric instabilities is studied. The quasistatic h.f. surface wave and the ion-acoustic wave, both parametrically growing, generate a nonlinear current which also exist beyound the linear skin length of the incident electromagnetic wave. This current leads to an exponential amplification of the electromagnetic wave amplitude in the layer. The growth rate of this process depends on the overthreshold value of the external wave intensity and the thickness of the layer. The saturation level of the transmitted wave amplitude is estimated for the case, when the instabilities are stabilized by generation of ion-acoustic harmonics. (author)

Higher resting heart rate variability predicts skill in expressing some emotions.

Science.gov (United States)

Tuck, Natalie L; Grant, Rosemary C I; Sollers, John J; Booth, Roger J; Consedine, Nathan S

2016-12-01

Vagally mediated heart rate variability (vmHRV) is a measure of cardiac vagal tone, and is widely viewed as a physiological index of the capacity to regulate emotions. However, studies have not directly tested whether vmHRV is associated with the ability to facially express emotions. In extending prior work, the current report tested links between resting vmHRV and the objectively assessed ability to facially express emotions, hypothesizing that higher vmHRV would predict greater expressive skill. Eighty healthy women completed self-reported measures, before attending a laboratory session in which vmHRV and the ability to express six emotions in the face were assessed. A repeated measures analysis of variance revealed a marginal main effect for vmHRV on skill overall; individuals with higher resting vmHRV were only better able to deliberately facially express anger and interest. Findings suggest that differences in resting vmHRV are associated with the objectively assessed ability to facially express some, but not all, emotions, with potential implications for health and well-being. © 2016 Society for Psychophysiological Research.

Barbs facilitate the helical penetration of honeybee (Apis mellifera ligustica) stingers.

Science.gov (United States)

Wu, Jianing; Yan, Shaoze; Zhao, Jieliang; Ye, Yuying

2014-01-01

The stinger is a very small and efficient device that allows honeybees to perform two main physiological activities: repelling enemies and laying eggs for reproduction. In this study, we explored the specific characteristics of stinger penetration, where we focused on its movements and the effects of it microstructure. The stingers of Italian honeybees (Apis mellifera ligustica) were grouped and fixed onto four types of cubic substrates, before pressing into different substrates. The morphological characteristics of the stinger cross-sections were analyzed before and after penetration by microscopy. Our findings suggest that the honeybee stinger undergoes helical and clockwise rotation during penetration. We also found that the helical penetration of the stinger is associated directly with the spiral distribution of the barbs, thereby confirming that stinger penetration involves an advanced microstructure rather than a simple needle-like apparatus. These results provide new insights into the mechanism of honeybee stinger penetration.

In vitro investigation of the follicular penetration of porcine ear skin using a nanoparticle-emulsion containing the antiseptic polihexanide

International Nuclear Information System (INIS)

Ulmer, M; Patzelt, A; Lademann, J; Richter, H; Sterry, W; Lange-Asschenfeldt, B; Vergou, T; Kramer, A; Mueller, G

2012-01-01

Earlier investigations regarding the distribution of the bacterial flora on the human skin demonstrate that the hair follicle acts as a bacterial reservoir, providing a quick source for secondary recontamination. These findings highlight the importance of the hair follicle as a target for modern antiseptics. In the present study, we have assessed the follicular penetration of a curcumin-labeled particle-associated antiseptic into porcine skin by laser scanning microscopy. Therefore, the follicular penetration depth of the curcumin-labeled particle-associated antiseptic was compared to the follicular penetration depth of curcumin-labeled particles without antiseptic. The investigation was performed in vitro using porcine skin biopsies. By superposition of the images acquired in the transmission and the fluorescent modus, it was possible to visualize the distribution of the fluorescent dye inside the hair follicles. Quantitative and qualitative results showed that both dispersions penetrated efficiently into the hair follicles. The average penetration depth of the particles with attached antiseptic polihexanide was significantly higher than that of particles without the attached antiseptic. Also, whilst very little sample preparation was needed, laser scanning microscopy was found to be an efficient tool to visualize the skin relief and in particular the hair follicle shaft and localize fluorescent markers within the skin tissue and hair follicles

Conducting network penetration and espionage in a global environment

CERN Document Server

Middleton, Bruce

2014-01-01

When it's all said and done, penetration testing remains the most effective way to identify security vulnerabilities in computer networks. Conducting Network Penetration and Espionage in a Global Environment provides detailed guidance on how to perform effective penetration testing of computer networks-using free, open source, and commercially available tools, including Backtrack, Metasploit, Wireshark, Nmap, Netcat, and Nessus. It also considers exploits and other programs using Python, PERL, BASH, PHP, Ruby, and Windows PowerShell.The book taps into Bruce Middleton's decades of experience wi

Experience With The Management Of unusual Penetrating Chest ...

African Journals Online (AJOL)

The presentation shows how a victim of fall from height in the bush can sustain a penetrating chest injury on a dry stick of a shrub. Applications on the principles of management of penetrating chest injury is needed despite the grotesque clinical appearance. [Jnl College of Medicine Vol.7(1) 2002: 40-42] ...

An explosive acoustic telemetry system for seabed penetrators

Energy Technology Data Exchange (ETDEWEB)

Hauser, G.C.; Hickerson, J.

1988-04-01

This report discusses the design and past applications of an explosive acoustic telemetry system (EATS) for gathering and transmitting data from seabed penetrators. The system was first fielded in 1982 and has since been used to measure penetrator performance on three other occasions. Descriptions are given of the mechanical hardware, system electronics, and software.

Operational experience of extreme wind penetrations

Energy Technology Data Exchange (ETDEWEB)

Estanqueiro, Ana [INETI/LNEG - National Laboratory for Energy and Geology, Lisbon (Portugal); Mateus, Carlos B. [Instituto de Meteorologia, Lisboa (Portugal); Pestana, Rui [Redes Energeticas Nacionais (REN), Lisboa (Portugal)

2010-07-01

This paper reports the operational experience from the Portuguese Power System during the 2009/2010 winter months when record wind penerations were observed: the instantaneous wind power penetration peaked at 70% of consumption during no-load periods and the wind energy accounted for more than 50% of the energy consumed for a large period. The regulation measures taken by the TSO are presented in the paper, together with the additional reserves operated for added system security. Information on the overall power system behavior under such extreme long-term wind power penetrations will also be addressed. (org.)

Generic Penetration of the SSRI Market.

Science.gov (United States)

Cascade, Elisa F; Kalali, Amir H

2008-04-01

In this article, we investigate the penetration of generic selective serotonin reuptake inhibitors (SSRIs) in the US market and the implications for patient out-of-pocket expense. The data suggest that generic penetration into the SSRI market has grown from approximately nine percent in 2000, the year that the patent for Prozac((R)) expired, to 72 percent in 2007. For December, 2007, the difference in patient out-of-pocket expense for branded vs. generic agents was, on average, $55.42 for patients paying by cash (i.e., they had no prescription drug insurance) and $22.39 for patients with insurance coverage.

Penetrating ocular trauma from trampoline spring.

Science.gov (United States)

Spokes, David; Siddiqui, Salina; Vize, Colin

2010-02-01

The case is presented of a 12-year old boy who sustained severe penetrating ocular trauma while playing on a domestic trampoline. A main spring broke under tension and the hook had struck the eye at high velocity and penetrated the sclera. Primary repair was undertaken but on review it became apparent the eye could not be salvaged. Evisceration was carried out and an orbital implant was placed. Post-operative cosmesis is acceptable. This type of injury has not been reported before. Adult supervision of children on trampolines is recommended to minimise the chance of serious injury.

Determining Hermeticity of Electron Devices by Dye Penetration

CERN Document Server

American Society for Testing and Materials. Philadelphia

1972-01-01

1.1 These practices cover procedures that will normally detect and locate the sites of gross leaks in electron devices. 1.2 These procedures are suitable for use on selected parts during receiving inspection or to verify and locate leakage sites for production control. They are not quantitative; no indication of leak size can be inferred from the test. 1.3 These procedures are most suitable for use on transparent glass-encased devices; all methods are applicable to transparent parts with an internal cavity. Method A, Penetrant-Capillary, is also applicable to parts, such as terminals, end seals or base assemblies, without an internal cavity, and Method C, Penetrant-Pressure Followed by Vacuum, can be used on opaque parts with an internal cavity. Method B, Penetrant-Pressure, can also be used on opaque parts with an internal cavity if the part is opened after dye penetration and before inspection. Parts that have an internal cavity may either contain gas (such as air, nitrogen, nitrogen-helium mixture, etc.) o...

Primary repair of penetrating colon injuries: a systematic review.

Science.gov (United States)

Singer, Marc A; Nelson, Richard L

2002-12-01

Primary repair of penetrating colon injuries is an appealing management option; however, uncertainty about its safety persists. This study was conducted to compare the morbidity and mortality of primary repair with fecal diversion in the management of penetrating colon injuries by use of a meta-analysis of randomized, prospective trials. We searched for prospective, randomized trials in MEDLINE (1966 to November 2001), the Cochrane Library, and EMBase using the terms colon, penetrating, injury, colostomy, prospective, and randomized. Studies were included if they were randomized, controlled trials that compared the outcomes of primary repair with fecal diversion in the management of penetrating colon injuries. Five studies were included. Reviewers performed data extraction independently. Outcomes evaluated from each trial included mortality, total complications, infectious complications, intra-abdominal infections, wound complications, penetrating abdominal trauma index, and length of stay. Peto odds ratios for combined effect were calculated with a 95 percent confidence interval for each outcome. Heterogeneity was also assessed for each outcome. The penetrating abdominal trauma index of included subjects did not differ significantly between studies. Mortality was not significantly different between groups (odds ratio, 1.70; 95 percent confidence interval, 0.51-5.66). However, total complications (odds ratio, 0.28; 95 percent confidence interval, 0.18-0.42), total infectious complications (odds ratio, 0.41; 95 percent confidence interval, 0.27-0.63), abdominal infections including dehiscence (odds ratio, 0.59; 95 percent confidence interval, 0.38-0.94), abdominal infections excluding dehiscence (odds ratio, 0.52; 95 percent confidence interval, 0.31-0.86), wound complications including dehiscence (odds ratio, 0.55; 95 percent confidence interval, 0.34-0.89), and wound complications excluding dehiscence (odds ratio, 0.43; 95 percent confidence interval, 0

The study of heat penetration of kimchi soup on stationary and rotary retorts.

Science.gov (United States)

Cho, Won-Il; Park, Eun-Ji; Cheon, Hee Soon; Chung, Myong-Soo

2015-03-01

The aim of this study was to determine the heat-penetration characteristics using stationary and rotary retorts to manufacture Kimchi soup. Both heat-penetration tests and computer simulation based on mathematical modeling were performed. The sterility was measured at five different positions in the pouch. The results revealed only a small deviation of F 0 among the different positions, and the rate of heat transfer was increased by rotation of the retort. The thermal processing of retort-pouched Kimchi soup was analyzed mathematically using a finite-element model, and optimum models for predicting the time course of the temperature and F 0 were developed. The mathematical models could accurately predict the actual heat penetration of retort-pouched Kimchi soup. The average deviation of the temperature between the experimental and mathematical predicted model was 2.46% (R(2)=0.975). The changes in nodal temperature and F 0 caused by microbial inactivation in the finite-element model predicted using the NISA program were very similar to that of the experimental data of for the retorted Kimchi soup during sterilization with rotary retorts. The correlation coefficient between the simulation using the NISA program and the experimental data was very high, at 99%.

Penetrating Atherosclerotic Ulcer of the Descending Thoracic Aorta: Treatment by Endovascular Stent-Graft

International Nuclear Information System (INIS)

Murgo, Salvatore; Dussaussois, Luc; Golzarian, Jafar; Cavenaile, Jean Christophe; Abada, Hicham Tarik; Ferreira, Jose; Struyven, Julien

1998-01-01

Purpose: To present four cases of penetrating ulcer of the descending thoracic aorta treated by transfemoral insertion of an endoluminal stent-graft. Methods: Four patients with penetrating aortic ulcers were reviewed. Three cases were complicated by rupture, false aneurysm, or retrograde dissection. All patients were treated by endovascular stent-graft and were followed by helical computed tomography (CT). Results: Endovascular stent-graft deployment was successful in all patients. However, in one case we observed a perigraft leak that spontaneously disappeared within the first month, and two interventions were needed for another patient. Following treatment, one episode of transient spinal ischemia was observed. The 30-day survival rate was 100%, but one patient died from pneumonia with cardiac failure 34 days after the procedure. In one patient, helical CT performed at 3 months showed a false aneurysm independent of the first ulcer. This patient refused any further treatment and suddenly died at home (unknown cause) after a 6-month follow-up period. Conclusion: Transluminal placement of endovascular stent-grafts for treatment of penetrating ulcers of the descending thoracic aorta appears to be a possible alternative to classical surgery. After treatment, follow-up by CT is essential to detect possible complications of the disease

Efficiency and Import Penetration on the Productivity of Textile Industry and Textile Products

Directory of Open Access Journals (Sweden)

Catur Basuki Rakhmawan

2012-12-01

Full Text Available Although textile industry and textile products belong to the strategic sub-sector of manufacturing industry in Indonesia, they are facing problems on the availability of energy, old production machines, and the flooding of imported products into the domestic market. This study is aimed to analyze the efficiency and productivity as performance indicators and how the efficiency and import penetration affect the productivity of textile industry and textile products. The methods of data analysis used in this research are divided in two phases. The first phase, the non-metric approach of Data Envelopment Analysis (DEA is applied to measure the efficiency and productivity. Secondly, the fixed effect model of econometric regression approach is used to find out the effects of efficiency and import penetration on the productivity of textile industry and textile products. The result shows that the average level of efficiency of textile industry and textile products during the period of 2004 – 2008 is about 40 percent with a growth rate of average productivity increases 2.4 percent. Whereas, the econometric estimation results indicate that the increase of efficiency will positively and significantly affect the productivity of textile industry and textile products. On the other hand, the increase of import penetration will negatively affect the productivity of this industry.

Orientation dependence of deformation and penetration behavior of tungsten single-crystal rods

International Nuclear Information System (INIS)

Bruchey, W.J.; Horwath, E.J.; Kingman, P.W.

1991-01-01

This paper reports on the performance of tungsten single crystals as kinetic energy penetrator materials that was investigated in a high length-to-diameter (L/D) rod geometry at sub-scale (1/4 geometric scale). The [111]. [110], and [100] crystal orientations were tested in this 74-g LD = 15 geometry penetrator (6.90-mm diameter x 102.5-mm length). Several 93% tungsten alloy and uranium 3/4 titanium rod geometries were also tested to baseline expected performance of typical penetrator material/geometry combinations. Performance was determined for semi-infinite penetration into RHA steel and finite penetration into 76.20-mm RHA steel. Of the orientation tested, the [100] orientation provided the best ballistic results, with superior performance to mass and geometric equivalent 93% tungsten alloy rods. The [100] orientation also provided similar performance to geometric equivalent uranium 3/4 titanium rods. Favorable slip/cleavage during the compressive loading of the penetration process to allow penetrator material flow without large scale plastic deformation, and final shear localization at a favorable angle for easy material flow away from the penetration interface, contribute to the [100] orientation crystals' excellent performance. The net result was less energy expenditure during penetrator flow and, therefore, more energy for deformation of RHA

Urgent thoracotomy for penetrating chest trauma: analysis of 158 patients of a single center.

Science.gov (United States)

Onat, Serdar; Ulku, Refik; Avci, Alper; Ates, Gungor; Ozcelik, Cemal

2011-09-01

Penetrating injuries to the chest present a frequent and challenging problem, but the majority of these injuries can be managed non-\\operatively. The aim of this study was to describe the incidence of penetrating chest trauma and the ultimate techniques used for operative management, as well as the diagnosis, complications, morbidity and mortality. A retrospective 9-year review of patients who underwent an operative procedure following penetrating chest trauma was performed. The mechanism of injury, gender, age, physiological and outcome parameters, including injury severity score (ISS), chest abbreviated injury scale (AIS) score, lung injury scale score, concomitant injuries, time from admission to operating room, transfusion requirement, indications for thoracotomy, intra-operative findings, operative procedures, length of hospital stay (LOS) and rate of mortality were recorded. A total of 1123 patients who were admitted with penetrating thoracic trauma were investigated. Of these, 158 patients (93 stabbings, 65 gunshots) underwent a thoracotomy within 24 h after the penetrating trauma. There were 146 (92.4%) male and 12 (7.6%) female patients, and their mean age was 25.72 9.33 (range, 15–54) years. The mean LOS was 10.65 8.30 (range, 5–65) days. Patients admitted after a gunshot had a significantly longer LOS than those admitted with a stab wound (gunshot, 13.53 9.92 days; stab wound, 8.76 6.42 days, p chest AIS score (p chest requiring a thoracotomy are uncommon, and lung-sparing techniques have become the most frequently used procedures for lung injuries. The presence of associated abdominal injuries increased the mortality five-fold. Factors that affected mortality were ISS, chest AIS score, SBP, ongoing chest output, blood transfusion volume, diaphragmatic injury and associated abdominal injury.

Variance reduction methods applied to deep-penetration problems

International Nuclear Information System (INIS)

Cramer, S.N.

1984-01-01

All deep-penetration Monte Carlo calculations require variance reduction methods. Before beginning with a detailed approach to these methods, several general comments concerning deep-penetration calculations by Monte Carlo, the associated variance reduction, and the similarities and differences of these with regard to non-deep-penetration problems will be addressed. The experienced practitioner of Monte Carlo methods will easily find exceptions to any of these generalities, but it is felt that these comments will aid the novice in understanding some of the basic ideas and nomenclature. Also, from a practical point of view, the discussions and developments presented are oriented toward use of the computer codes which are presented in segments of this Monte Carlo course

Compound antimalarial ethosomal cataplasm: preparation, evaluation, and mechanism of penetration enhancement

Directory of Open Access Journals (Sweden)

Shen S

2015-06-01

Full Text Available Shuo Shen, Shu-Zhi Liu, Yu-Shi Zhang, Mao-Bo Du, Ai-Hua Liang, Li-Hua Song, Zu-Guang Ye Institute of Chinese Materia Medica, China Academy of Chinese Medical Sciences, Beijing, People’s Republic of China Abstract: Malaria is still a serious public health problem in some parts of the world. The problems of recurrence and drug resistance are increasingly more serious. Thus, it is necessary to develop a novel antimalarial agent. The objectives of this study were to construct a novel compound antimalarial transdermal nanosystem–ethosomal cataplasm, to investigate its characteristics and efficiency, and to systematically explore the penetration-enhancing mechanisms of ethosomal cataplasm. Artesunate-loaded ethosomes and febrifugine-loaded ethosomes were prepared, and their characteristics were evaluated. Drug-loaded ethosomes were incorporated in the matrix of cataplasm to form the compound antimalarial ethosomal cataplasm. With the help of ethosomal technology, the accumulated permeation quantity of artesunate significantly increased at 8 hours after administration, which was 1.57 times as much as that of conventional cataplasm. Soon after administration, the ethosomal cataplasm could make a large quantity of antimalarial drug quickly penetrate through skin, then the remaining drug in the ethosomal cataplasm could be steadily released. These characteristics of ethosomal cataplasm are favorable for antimalarial drugs to kill Plasmodium spp. quickly and prevent the resurgence of Plasmodium spp. As expected, the ethosomal cataplasm showed good antimalarial efficiency in this experiment. The negative conversion rates were 100% and the recurrence rates were 0% at all dosages. The mechanism of penetration enhancement of the ethosomal cataplasm was systematically explored using an optics microscope, polarization microscope, and transmission electron microscopy. The microstructure, ultrastructure, and birefringent structure in skin were observed. Data

A Study of Crystalline Mechanism of Penetration Sealer Materials.

Science.gov (United States)

Teng, Li-Wei; Huang, Ran; Chen, Jie; Cheng, An; Hsu, Hui-Mi

2014-01-14

It is quite common to dispense a topping material like crystalline penetration sealer materials (CPSM) onto the surface of a plastic substance such as concrete to extend its service life span by surface protections from outside breakthrough. The CPSM can penetrate into the existing pores or possible cracks in such a way that it may form crystals to block the potential paths which provide breakthrough for any unknown materials. This study investigated the crystalline mechanism formed in the part of concrete penetrated by the CPSM. We analyzed the chemical composites, in order to identify the mechanism of CPSM and to evaluate the penetrated depth. As shown in the results, SEM observes the acicular-structured crystals filling capillary pores for mortar substrate of the internal microstructure beneath the concrete surface; meanwhile, XRD and FT-IR showed the main hydration products of CPSM to be C-S-H gel and CaCO₃. Besides, MIP also shows CPSM with the ability to clog capillary pores of mortar substrate; thus, it reduces porosity, and appears to benefit in sealing pores or cracks. The depth of CPSM penetration capability indicated by TGA shows 0-10 mm of sealer layer beneath the concrete surface.