Development and validation of a new kind of coupling element for wheel-hub motors

Science.gov (United States)

Perekopskiy, Sergey; Kasper, Roland

2018-05-01

For the automotive industry, electric powered vehicles are becoming an increasingly relevant factor in the competition against climate change. Application of one special example - a wheel-hub motor, for electric powered vehicle can support this challenge. Patented slotless air gap winding invented at the chair of mechatronics of the Otto von Guericke University Magdeburg has great application potential in constantly growing e-mobility field, especially for wheel-hub motors based on this technology due to its advantages, such as a high gravimetric power density and high efficiency. However, advantages of this technology are decreased by its sensibility to the loads out of driving maneuvers by dimensional variations of air gap consistency. This article describes the development and validation of a coupling element for the designed wheel-hub motor. To find a suitable coupling concept first the assembly structure of the motor was analyzed and developed design of the coupling element was checked. Based on the geometry of the motor and wheel a detailed design of the coupling element was generated. The analytical approach for coupling element describes a potential of the possible loads on the coupling element. The FEM simulation of critical load cases for the coupling element validated results of the analytical approach.

Joint Hub Network Development

OpenAIRE

Cruijssen, F.C.A.M.; Borm, P.E.M.; Dullaert, W.; Hamers, H.J.M.

2007-01-01

This paper introduces a framework for joint hub network development. Building a joint physical hub for transhipment of goods is expensive and therefore involves considerable risks for the cooperating companies. In a practical setting, it is unlikely that an entire network will be built at once. Rather, the partners will have a more cautious attitude and build the hub facilities one-by-one. In the proposed framework, every time a new hub is introduced, partners will have the opportunity to dec...

Hub and Axis

OpenAIRE

Hansen, Gary Alan

2010-01-01

The project is for the central building of a community center used by the communities of Blacksburg and Christiansburg. The building is a space configured as a hub that uses axes to determine entering, exiting and vertical movement. The hub configuration of the building is in concentric rings around the atrium in both space and materials. As materials were brought into the building, they enhanced the strong axial configuration and emphasized the layers surrounding the central hub space of ...

Portable Desktop Apps with GitHub Electron

CERN Multimedia

CERN. Geneva

2016-01-01

Wouldn't it be nice if you could develop applications that work everywhere, regardless of Operating System or Platform? Even better, what if you could employ the same front-end technologies you use for your web/mobile apps? Meet GitHub Electron.

Teaching through mobile technology : a reflection from high school studies in South Africa

OpenAIRE

Jantjies, Mmaki; Joy, Mike

2017-01-01

The use of mobile technology to support teaching and learning in schools, has extended technology learning tools in schools across different socio economic divides. There have been various studies throughout the world which reflect the improvement of such technology in schools. In this chapter we reflect on a series of studies conducted in developing countries with focus on Jantjies and Joy (2012,2013,2014,2015) studies. The studies were conducted in schools with the objective of providing te...

Learning Graphical Models With Hubs.

Science.gov (United States)

Tan, Kean Ming; London, Palma; Mohan, Karthik; Lee, Su-In; Fazel, Maryam; Witten, Daniela

2014-10-01

We consider the problem of learning a high-dimensional graphical model in which there are a few hub nodes that are densely-connected to many other nodes. Many authors have studied the use of an ℓ 1 penalty in order to learn a sparse graph in the high-dimensional setting. However, the ℓ 1 penalty implicitly assumes that each edge is equally likely and independent of all other edges. We propose a general framework to accommodate more realistic networks with hub nodes, using a convex formulation that involves a row-column overlap norm penalty. We apply this general framework to three widely-used probabilistic graphical models: the Gaussian graphical model, the covariance graph model, and the binary Ising model. An alternating direction method of multipliers algorithm is used to solve the corresponding convex optimization problems. On synthetic data, we demonstrate that our proposed framework outperforms competitors that do not explicitly model hub nodes. We illustrate our proposal on a webpage data set and a gene expression data set.

Gas and LNG trading hubs, hub indexation and destination flexibility in East Asia

International Nuclear Information System (INIS)

Shi, Xunpeng; Padinjare Variam, Hari Malamakkavu

2016-01-01

In the East Asian gas markets, issues like gas trading hubs, hub indexed pricing, and destination flexibility are being debated. This paper examines the impact of a change in East Asia's pricing benchmark and contract flexibility on the regional and global gas markets. The paper uses the Nexant World Gas Model, a linear program with global cost minimization as the objective. To our knowledge, this study on hub competition, price benchmark change and contract flexibility improvement in East Asia will be the first in the literature and have real policy relevance. The results show that both price benchmark change and contract flexibility improvements will create an overall benefit for the world and East Asia importers, but the impacts are different among exporters and importers. However, there is no evidence of competition among different benchmark hubs and no evidence that destination restrictions cause the “Asia Premium”. It implies that removal of destination clauses has higher priority than the change to hub indexation for Japan, Korea and Chinese Taipei, but both should be treated equally in China. The study also suggests that East Asian importers should cooperate among themselves and with exporters to facilitate the hub creation and contract changes in East Asia. - Highlights: •Gas trading hubs in Japan and China are not mutually exclusive. •Both price benchmark changes and contract flexibility improvements are beneficial. •The “Asian Premium” is not caused by destination restriction. •Destination flexibility is much more important than hub indexation in East Asia except China. •Hub indexation is as important as destination flexibility in China due to pipeline imports.

Hubs of Anticorrelation in High-Resolution Resting-State Functional Connectivity Network Architecture.

Science.gov (United States)

Gopinath, Kaundinya; Krishnamurthy, Venkatagiri; Cabanban, Romeo; Crosson, Bruce A

2015-06-01

A major focus of brain research recently has been to map the resting-state functional connectivity (rsFC) network architecture of the normal brain and pathology through functional magnetic resonance imaging. However, the phenomenon of anticorrelations in resting-state signals between different brain regions has not been adequately examined. The preponderance of studies on resting-state fMRI (rsFMRI) have either ignored anticorrelations in rsFC networks or adopted methods in data analysis, which have rendered anticorrelations in rsFC networks uninterpretable. The few studies that have examined anticorrelations in rsFC networks using conventional methods have found anticorrelations to be weak in strength and not very reproducible across subjects. Anticorrelations in rsFC network architecture could reflect mechanisms that subserve a number of important brain processes. In this preliminary study, we examined the properties of anticorrelated rsFC networks by systematically focusing on negative cross-correlation coefficients (CCs) among rsFMRI voxel time series across the brain with graph theory-based network analysis. A number of methods were implemented to enhance the neuronal specificity of resting-state functional connections that yield negative CCs, although at the cost of decreased sensitivity. Hubs of anticorrelation were seen in a number of cortical and subcortical brain regions. Examination of the anticorrelation maps of these hubs indicated that negative CCs in rsFC network architecture highlight a number of regulatory interactions between brain networks and regions, including reciprocal modulations, suppression, inhibition, and neurofeedback.

Research dedusting efficiency of the inertial hub with adjustable parameters

Directory of Open Access Journals (Sweden)

Sharapov Rashid

2016-01-01

Full Text Available Production of construction materials every year production increases, thus increasing emissions pollutants into the atmosphere subjected to cleaning. At the enterprises of building materials production equipment becoming outdated both morally and physically exhausted their useful life. Technological design standards in the operation of purification equipment has undergone a number of changes. There are a large number of works devoted to the theory of cyclone separation. They examined calculation method and to determine the minimum size of particles is separated completely from the air stream in a cyclone. In theory, the high efficiency cyclones are relatively small separation of particles from the air stream. The experiments show that certain fractions of full capture occurs from the cyclones and out relatively large particles. Designed dust device hubs. They capture dust particles with low specific density and smaller than 5–10 microns. Rational use of hubs is achieved in the aspiration systems high performance. They are placed in front of or between the filter and the cyclone filter. Hub much reduces the amount of dust-laden air directed onto a thin cleaning. This reduces energy consumption for manufacturing as a whole, as well as, due to a possible decrease in performance fine filters, reducing their initial cost, metal consumption, maintenance costs and reduce the area occupied by them.

Altered cortical hubs in functional brain networks in amyotrophic lateral sclerosis.

Science.gov (United States)

Ma, Xujing; Zhang, Jiuquan; Zhang, Youxue; Chen, Heng; Li, Rong; Wang, Jian; Chen, Huafu

2015-11-01

Cortical hubs are highly connected nodes in functional brain networks that play vital roles in the efficient transfer of information across brain regions. Although altered functional connectivity has been found in amyotrophic lateral sclerosis (ALS), the changing pattern in functional network hubs in ALS remains unknown. In this study, we applied a voxel-wise method to investigate the changing pattern of cortical hubs in ALS. Through resting-state fMRI, we constructed whole-brain voxel-wise functional networks by measuring the temporal correlations of each pair of brain voxels and identified hubs using the graph theory method. Specifically, a functional connectivity strength (FCS) map was derived from the data on 20 patients with ALS and 20 healthy controls. The brain regions with high FCS values were regarded as functional network hubs. Functional hubs were found mainly in the bilateral precuneus, parietal cortex, medial prefrontal cortex, and in several visual regions and temporal areas in both groups. Within the hub regions, the ALS patients exhibited higher FCS in the prefrontal cortex compared with the healthy controls. The FCS value in the significantly abnormal hub regions was correlated with clinical variables. Results indicated the presence of altered cortical hubs in the ALS patients and could therefore shed light on the pathophysiology mechanisms underlying ALS.

When Is Hub Gene Selection Better than Standard Meta-Analysis?

Science.gov (United States)

Langfelder, Peter; Mischel, Paul S.; Horvath, Steve

2013-01-01

Since hub nodes have been found to play important roles in many networks, highly connected hub genes are expected to play an important role in biology as well. However, the empirical evidence remains ambiguous. An open question is whether (or when) hub gene selection leads to more meaningful gene lists than a standard statistical analysis based on significance testing when analyzing genomic data sets (e.g., gene expression or DNA methylation data). Here we address this question for the special case when multiple genomic data sets are available. This is of great practical importance since for many research questions multiple data sets are publicly available. In this case, the data analyst can decide between a standard statistical approach (e.g., based on meta-analysis) and a co-expression network analysis approach that selects intramodular hubs in consensus modules. We assess the performance of these two types of approaches according to two criteria. The first criterion evaluates the biological insights gained and is relevant in basic research. The second criterion evaluates the validation success (reproducibility) in independent data sets and often applies in clinical diagnostic or prognostic applications. We compare meta-analysis with consensus network analysis based on weighted correlation network analysis (WGCNA) in three comprehensive and unbiased empirical studies: (1) Finding genes predictive of lung cancer survival, (2) finding methylation markers related to age, and (3) finding mouse genes related to total cholesterol. The results demonstrate that intramodular hub gene status with respect to consensus modules is more useful than a meta-analysis p-value when identifying biologically meaningful gene lists (reflecting criterion 1). However, standard meta-analysis methods perform as good as (if not better than) a consensus network approach in terms of validation success (criterion 2). The article also reports a comparison of meta-analysis techniques applied to

When is hub gene selection better than standard meta-analysis?

Directory of Open Access Journals (Sweden)

Peter Langfelder

Full Text Available Since hub nodes have been found to play important roles in many networks, highly connected hub genes are expected to play an important role in biology as well. However, the empirical evidence remains ambiguous. An open question is whether (or when hub gene selection leads to more meaningful gene lists than a standard statistical analysis based on significance testing when analyzing genomic data sets (e.g., gene expression or DNA methylation data. Here we address this question for the special case when multiple genomic data sets are available. This is of great practical importance since for many research questions multiple data sets are publicly available. In this case, the data analyst can decide between a standard statistical approach (e.g., based on meta-analysis and a co-expression network analysis approach that selects intramodular hubs in consensus modules. We assess the performance of these two types of approaches according to two criteria. The first criterion evaluates the biological insights gained and is relevant in basic research. The second criterion evaluates the validation success (reproducibility in independent data sets and often applies in clinical diagnostic or prognostic applications. We compare meta-analysis with consensus network analysis based on weighted correlation network analysis (WGCNA in three comprehensive and unbiased empirical studies: (1 Finding genes predictive of lung cancer survival, (2 finding methylation markers related to age, and (3 finding mouse genes related to total cholesterol. The results demonstrate that intramodular hub gene status with respect to consensus modules is more useful than a meta-analysis p-value when identifying biologically meaningful gene lists (reflecting criterion 1. However, standard meta-analysis methods perform as good as (if not better than a consensus network approach in terms of validation success (criterion 2. The article also reports a comparison of meta-analysis techniques

When is hub gene selection better than standard meta-analysis?

Science.gov (United States)

Langfelder, Peter; Mischel, Paul S; Horvath, Steve

2013-01-01

Since hub nodes have been found to play important roles in many networks, highly connected hub genes are expected to play an important role in biology as well. However, the empirical evidence remains ambiguous. An open question is whether (or when) hub gene selection leads to more meaningful gene lists than a standard statistical analysis based on significance testing when analyzing genomic data sets (e.g., gene expression or DNA methylation data). Here we address this question for the special case when multiple genomic data sets are available. This is of great practical importance since for many research questions multiple data sets are publicly available. In this case, the data analyst can decide between a standard statistical approach (e.g., based on meta-analysis) and a co-expression network analysis approach that selects intramodular hubs in consensus modules. We assess the performance of these two types of approaches according to two criteria. The first criterion evaluates the biological insights gained and is relevant in basic research. The second criterion evaluates the validation success (reproducibility) in independent data sets and often applies in clinical diagnostic or prognostic applications. We compare meta-analysis with consensus network analysis based on weighted correlation network analysis (WGCNA) in three comprehensive and unbiased empirical studies: (1) Finding genes predictive of lung cancer survival, (2) finding methylation markers related to age, and (3) finding mouse genes related to total cholesterol. The results demonstrate that intramodular hub gene status with respect to consensus modules is more useful than a meta-analysis p-value when identifying biologically meaningful gene lists (reflecting criterion 1). However, standard meta-analysis methods perform as good as (if not better than) a consensus network approach in terms of validation success (criterion 2). The article also reports a comparison of meta-analysis techniques applied to

Mechanical Design, Analysis, and Testing of a Two-Bladed Wind Turbine Hub

Energy Technology Data Exchange (ETDEWEB)

Cotrell, J.

2002-06-01

Researchers at the National Wind Technology Center (NWTC) in Golden, Colorado, began performing the Unsteady Aerodynamics Experiment in 1993 to better understand the unsteady aerodynamics and structural responses of horizontal-axis wind turbines. The experiment consists of an extensively instrumented, downwind, three-bladed, 20-kilowatt wind turbine. In May 1995, I received a request from the NWTC to design a two-bladed hub for the experiment. For my thesis, I present the results of the mechanical design, analysis, and testing of the hub. The hub I designed is unique because it runs in rigid, teetering, or independent blade-flapping modes. In addition, the design is unusual because it uses two servomotors to pitch the blades independently. These features are used to investigate new load reduction, noise reduction, blade pitch optimization, and yaw control techniques for two-bladed turbines. I used a methodology by G. Phal and W. Bietz to design the hub. The hub meets all the performance specifications except that it achieves only 90% of the specified teeter range. In my thesis, I focus on the analysis and testing of the hub body. I performed solid-mechanics calculations, ran a finite-element analysis simulation, and experimentally investigated the structural integrity of the hub body.

Application of reflective memory network in Tokamak fast controller

International Nuclear Information System (INIS)

Weng Chuqiao; Zhang Ming; Liu Rui; Zheng Wei; Zhuang Ge

2014-01-01

A specific application of reflective memory network in Tokamak fast controller was introduced in this paper. The PMC-5565 reflective memory card and ACC-5565 network hub were used to build a reflective memory real-time network to test its real- time function. The real-time, rapidity and determinacy of the time delay for fast controller controlling power device under the reflective memory network were tested in the LabVIEW RT real-time operation system. Depending on the reflective memory technology, the data in several fast controllers were synchronized, and multiple control tasks using a single control task were finished. The experiment results show that the reflective memory network can meet the real-time requirements for fast controller to perform the feedback control over devices. (authors)

Solving Hub Network Problem Using Genetic Algorithm

Directory of Open Access Journals (Sweden)

Mursyid Hasan Basri

2012-01-01

Full Text Available This paper addresses a network problem that described as follows. There are n ports that interact, and p of those will be designated as hubs. All hubs are fully interconnected. Each spoke will be allocated to only one of available hubs. Direct connection between two spokes is allowed only if they are allocated to the same hub. The latter is a distinct characteristic that differs it from pure hub-and-spoke system. In case of pure hub-and-spoke system, direct connection between two spokes is not allowed. The problem is where to locate hub ports and to which hub a spoke should be allocated so that total transportation cost is minimum. In the first model, there are some additional aspects are taken into consideration in order to achieve a better representation of the problem. The first, weekly service should be accomplished. Secondly, various vessel types should be considered. The last, a concept of inter-hub discount factor is introduced. Regarding the last aspect, it represents cost reduction factor at hub ports due to economies of scale. In practice, it is common that the cost rate for inter-hub movement is less than the cost rate for movement between hub and origin/destination. In this first model, inter-hub discount factor is assumed independent with amount of flows on inter-hub links (denoted as flow-independent discount policy. The results indicated that the patterns of enlargement of container ship size, to some degree, are similar with those in Kurokawa study. However, with regard to hub locations, the results have not represented the real practice. In the proposed model, unsatisfactory result on hub locations is addressed. One aspect that could possibly be improved to find better hub locations is inter-hub discount factor. Then inter-hub discount factor is assumed to depend on amount of inter-hub flows (denoted as flow-dependent discount policy. There are two discount functions examined in this paper. Both functions are characterized by

Natural Gas Market Hubs

Data.gov (United States)

Department of Homeland Security — A hub is a physical transfer point for natural gas where several pipelines are connected. A market center is a hub where the operator offers services that facilitate...

Permasalahan P-Hub Median Dengan Lintasan Terpendek

OpenAIRE

Pasaribu, Raja David

2013-01-01

Hub are facilities that serve as sorting, switching, and transhipment in a transportation network. P-hub median problem is a discrete case location allocation problem which all hub is fully connected. In this paper will be intoduced Mixed Integrer Linear Programming (MILP) formulation models of cost for p-hub median problem allocation for uncapacitaced single allocation p-hub median(USApHMP). In this paper also introduced Floyd-Warshall shortest path algorithm to solve p-hub median problems a...

Developmental Changes in Brain Network Hub Connectivity in Late Adolescence.

Science.gov (United States)

Baker, Simon T E; Lubman, Dan I; Yücel, Murat; Allen, Nicholas B; Whittle, Sarah; Fulcher, Ben D; Zalesky, Andrew; Fornito, Alex

2015-06-17

The human brain undergoes substantial development throughout adolescence and into early adulthood. This maturational process is thought to include the refinement of connectivity between putative connectivity hub regions of the brain, which collectively form a dense core that enhances the functional integration of anatomically distributed, and functionally specialized, neural systems. Here, we used longitudinal diffusion magnetic resonance imaging to characterize changes in connectivity between 80 cortical and subcortical anatomical regions over a 2 year period in 31 adolescents between the ages of 15 and 19 years. Connectome-wide analysis indicated that only a small subset of connections showed evidence of statistically significant developmental change over the study period, with 8% and 6% of connections demonstrating decreased and increased structural connectivity, respectively. Nonetheless, these connections linked 93% and 90% of the 80 regions, respectively, pointing to a selective, yet anatomically distributed pattern of developmental changes that involves most of the brain. Hub regions showed a distinct tendency to be highly connected to each other, indicating robust "rich-club" organization. Moreover, connectivity between hubs was disproportionately influenced by development, such that connectivity between subcortical hubs decreased over time, whereas frontal-subcortical and frontal-parietal hub-hub connectivity increased over time. These findings suggest that late adolescence is characterized by selective, yet significant remodeling of hub-hub connectivity, with the topological organization of hubs shifting emphasis from subcortical hubs in favor of an increasingly prominent role for frontal hub regions. Copyright © 2015 the authors 0270-6474/15/359078-10$15.00/0.

Channel Bonding in Linux Ethernet Environment using Regular Switching Hub

Directory of Open Access Journals (Sweden)

Chih-wen Hsueh

2004-06-01

Full Text Available Bandwidth plays an important role for quality of service in most network systems. There are many technologies developed to increase host bandwidth in a LAN environment. Most of them need special hardware support, such as switching hub that supports IEEE Link Aggregation standard. In this paper, we propose a Linux solution to increase the bandwidth between hosts with multiple network adapters connected to a regular switching hub. The approach is implemented as two Linux kernel modules in a LAN environment without modification to the hardware and operating systems on host machines. Packets are dispatched to bonding network adapters for transmission. The proposed approach is backward compatible, flexible and transparent to users and only one IP address is needed for multiple bonding network adapters. Evaluation experiments in TCP and UDP transmission are shown with bandwidth gain proportionally to the number of network adapters. It is suitable for large-scale LAN systems with high bandwidth requirement, such as clustering systems.

Numerical investigation of hub clearance flow in a Kaplan turbine

Science.gov (United States)

Wu, H.; Feng, J. J.; Wu, G. K.; Luo, X. Q.

2012-11-01

In this paper, the flow field considering the hub clearance flow in a Kaplan turbine has been investigated through using the commercial CFD code ANSYS CFX based on high-quality structured grids generated by ANSYS ICEM CFD. The turbulence is simulated by k-ω based shear stress transport (SST) turbulence model together with automatic near wall treatments. Four kinds of simulations have been conducted for the runner geometry without hub clearance, with only the hub front clearance, with only the rear hub clearance, and with both front and rear clearance. The analysis of the obtained results is focused on the flow structure of the hub clearance flow, the effect on the turbine performance including hydraulic efficiency and cavitation performance, which can improve the understanding on the flow field in a Kaplan turbine.

Numerical investigation of hub clearance flow in a Kaplan turbine

International Nuclear Information System (INIS)

Wu, H; Feng, J J; Wu, G K; Luo, X Q

2012-01-01

In this paper, the flow field considering the hub clearance flow in a Kaplan turbine has been investigated through using the commercial CFD code ANSYS CFX based on high-quality structured grids generated by ANSYS ICEM CFD. The turbulence is simulated by k-ω based shear stress transport (SST) turbulence model together with automatic near wall treatments. Four kinds of simulations have been conducted for the runner geometry without hub clearance, with only the hub front clearance, with only the rear hub clearance, and with both front and rear clearance. The analysis of the obtained results is focused on the flow structure of the hub clearance flow, the effect on the turbine performance including hydraulic efficiency and cavitation performance, which can improve the understanding on the flow field in a Kaplan turbine.

Optimal hub location in pipeline networks

Energy Technology Data Exchange (ETDEWEB)

Dott, D.R.; Wirasinghe, S.C.; Chakma, A. [Univ. of Calgary, Alberta (Canada)

1996-12-31

This paper discusses optimization strategies and techniques for the location of natural gas marketing hubs in the North American gas pipeline network. A hub is a facility at which inbound and outbound network links meet and freight is redirected towards their destinations. Common examples of hubs used in the gas pipeline industry include gas plants, interconnects and market centers. Characteristics of the gas pipeline industry which are relevant to the optimization of transportation costs using hubs are presented. Allocation techniques for solving location-allocation problems are discussed. An outline of the research in process by the authors in the field of optimal gas hub location concludes the paper.

LOCATING HUBS IN TRANSPORT NETWORKS: AN ARTIFICIAL INTELLIGENCE APPROACH

OpenAIRE

Dušan Teodorović; Milica Šelmić; Ivana Vukićević

2014-01-01

Hub facilities serve as switching and transshipment points in transportation and communication networks as well as in logistic systems. Hub networks have an influence on flows on the hub-to-hub links and ensure benefit from economies of scale in inter-hub transportation. The key factors for designing a successful hub-and-spoke network are to determine the optimal number of hubs, to properly locate hubs, and to allocate the non-hubs to the hubs. This paper presents the model to determine the l...

Joint Hub Network Development

NARCIS (Netherlands)

Cruijssen, F.C.A.M.; Borm, P.E.M.; Dullaert, W.; Hamers, H.J.M.

2007-01-01

This paper introduces a framework for joint hub network development. Building a joint physical hub for transhipment of goods is expensive and therefore involves considerable risks for the cooperating companies. In a practical setting, it is unlikely that an entire network will be built at once.

Hub Status and Indexation of Container Ports

Directory of Open Access Journals (Sweden)

Yong-An Park

2015-06-01

This study develops two sub-indexes of port classification and capacity, and combines cases of these two sub-indexes into various types in order to find a proper port hub index. The paper demonstrates how different types of port hub index are useful measurements for evaluating outputs and inputs of container ports. In a case analysis we show that the indexes of period variables and lagged variables have more explanatory power with regard to changes of port throughputs and high correlation with inputs.

Experimental Investigation of a Helicopter Rotor Hub Wake

Science.gov (United States)

Reich, David; Elbing, Brian; Schmitz, Sven

2013-11-01

A scaled model of a notional helicopter rotor hub was tested in the 48'' Garfield Thomas Water Tunnel at the Applied Research Laboratory Penn State. The main objectives of the experiment were to understand the spatial- and temporal content of the unsteady wake downstream of a rotor hub up to a distance corresponding to the empennage. Primary measurements were the total hub drag and velocity measurements at three nominal downstream locations. Various flow structures were identified and linked to geometric features of the hub model. The most prominent structures were two-per-revolution (hub component: scissors) and four-per-revolution (hub component: main hub arms) vortices shed by the hub. Both the two-per-revolution and four-per-revolution structures persisted far downstream of the hub, but the rate of dissipation was greater for the four-per-rev structures. This work provides a dataset for enhanced understanding of the fundamental physics underlying rotor hub flows and serves as validation data for future CFD analyses.

Hub exchange operations in intermodal hub-and spoke networks: A performance comparison of rail-rail exchange facilities

OpenAIRE

Bontekoning, Y.M.

2006-01-01

The implementation of hub-and-spoke networks in intermodal transport is suggested as one of the potential solutions for helping to increase the intermodal market share. Traditionally, trains are shunted at hubs; this is a time-consuming process. Since the early 1990s a new type of intermodal terminal, specifically designed for fast tran-shipment at nodes in hub-and-spoke networks, has been introduced in Europe. These hub terminals could replace this time-consuming shunting. Studies on the new...

Matrix logistics indicators assessment of distributed transport hub

Directory of Open Access Journals (Sweden)

Igor Arefyev

2014-06-01

Full Text Available Background: The paper is devoted to the distributed transport hub substantiation and assessment. The paper  was an example of the technique and form an array of logistical factors as variables that determine this condition. Experience in organizing multimodal transport showed that the "bottleneck" of transport logistics are items of cargo handling ports, terminals, freight stations and warehouses. At the core of the solution of these problems is the problem of estimating the variables determine the Multi-purpose Hubs. The aim is to develop a method of forming the system of logistical multiplying factors determine the role of each of the types in the technologiacal process of distributed Multi-purpose Hubs. Methods: The assessment model for the formation of Distributed Transport Units  can be based on formal methods to predict the behavior of complex systems engineering complexes. Then one of the approaches to the solution of the problem may be the matrix method of technological factors. Results and conclusions: The proposed methodology of the selection and validation of logistic coefficients has the practical importance in the models development for assessing the condition and behavior of Distributed Transport.

Composite hub/metal blade compressor rotor

Science.gov (United States)

Yao, S.

1978-01-01

A low cost compressor rotor was designed and fabricated for a small jet engine. The rotor hub and blade keepers were compression molded with graphite epoxy. Each pair of metallic blades was held in the hub by a keeper. All keepers were locked in the hub with circumferential windings. Feasibility of fabrication was demonstrated in this program.

The BioHub Knowledge Base: Ontology and Repository for Sustainable Biosourcing.

Science.gov (United States)

Read, Warren J; Demetriou, George; Nenadic, Goran; Ruddock, Noel; Stevens, Robert; Winter, Jerry

2016-06-01

The motivation for the BioHub project is to create an Integrated Knowledge Management System (IKMS) that will enable chemists to source ingredients from bio-renewables, rather than from non-sustainable sources such as fossil oil and its derivatives. The BioHubKB is the data repository of the IKMS; it employs Semantic Web technologies, especially OWL, to host data about chemical transformations, bio-renewable feedstocks, co-product streams and their chemical components. Access to this knowledge base is provided to other modules within the IKMS through a set of RESTful web services, driven by SPARQL queries to a Sesame back-end. The BioHubKB re-uses several bio-ontologies and bespoke extensions, primarily for chemical feedstocks and products, to form its knowledge organisation schema. Parts of plants form feedstocks, while various processes generate co-product streams that contain certain chemicals. Both chemicals and transformations are associated with certain qualities, which the BioHubKB also attempts to capture. Of immediate commercial and industrial importance is to estimate the cost of particular sets of chemical transformations (leading to candidate surfactants) performed in sequence, and these costs too are captured. Data are sourced from companies' internal knowledge and document stores, and from the publicly available literature. Both text analytics and manual curation play their part in populating the ontology. We describe the prototype IKMS, the BioHubKB and the services that it supports for the IKMS. The BioHubKB can be found via http://biohub.cs.manchester.ac.uk/ontology/biohub-kb.owl .

Maritime Domain Awareness Architecture Management Hub Strategy

National Research Council Canada - National Science Library

2008-01-01

This document provides an initial high level strategy for carrying out the responsibilities of the national Maritime Domain Awareness Architecture Management Hub to deliver a standards based service...

Data Collection and Management with ENSITE HUB: ENSITE HUB Version 1.0

Science.gov (United States)

2017-08-01

ER D C/ CE RL S R- 17 -1 4 Engineer Site Identification for the Tactical Environment (ENSITE) Data Collection and Management with ENSITE...and Management with ENSITE HUB ENSITE HUB Version 1.0 Juliana M. Wilhoit, Natalie R. Myers, and George W. Calfas Construction Engineering Research...and standardized manner. With such a tool, CB planners (as well as designers, operators, and manag - ers) can rapidly assess possible current and

Regional Hub port development : the case of Montevideo, Uruguay

OpenAIRE

Wilmsmeier, Gordon; Martínez Zarzoso, Inmaculada; Fiess, Norbert

2011-01-01

This paper reflects on port development in Uruguay in an environment of trilateral interport competition. The regional characteristics of port development in terms of their geographical, functional and operational characteristics are discussed by analysing the port system’s evolution. The case of Montevideo as the success or failure of a regional hub port development strategy is analysed in detail. Particular attention is given to the evolution and impact of the liner shipping service network...

Revisiting date and party hubs: novel approaches to role assignment in protein interaction networks.

Directory of Open Access Journals (Sweden)

Sumeet Agarwal

2010-06-01

Full Text Available The idea of "date" and "party" hubs has been influential in the study of protein-protein interaction networks. Date hubs display low co-expression with their partners, whilst party hubs have high co-expression. It was proposed that party hubs are local coordinators whereas date hubs are global connectors. Here, we show that the reported importance of date hubs to network connectivity can in fact be attributed to a tiny subset of them. Crucially, these few, extremely central, hubs do not display particularly low expression correlation, undermining the idea of a link between this quantity and hub function. The date/party distinction was originally motivated by an approximately bimodal distribution of hub co-expression; we show that this feature is not always robust to methodological changes. Additionally, topological properties of hubs do not in general correlate with co-expression. However, we find significant correlations between interaction centrality and the functional similarity of the interacting proteins. We suggest that thinking in terms of a date/party dichotomy for hubs in protein interaction networks is not meaningful, and it might be more useful to conceive of roles for protein-protein interactions rather than for individual proteins.

Saudi Arabia: A future regional hub for advanced education, research, science and technology.

Science.gov (United States)

Meo, Sultan Ayoub

2015-10-01

Saudi Arabia is the largest country of the Arabian Peninsula, blessed with significant natural resources, including oil, gas and minerals. Saudi Arabia has recognised the importance of education in social and economic transformation, and has established a large number of universities, research and advanced technical institutes which have broken the metropolitan boundaries and have been extended to the far-flung areas of the country. There are 68 universities and degree-awarding institutes. The educational budget reached its highest-ever level of $56.56 billion for the year 2014. About 124,000 Saudi students are pursuing higher education in about 500 universities around the world. Saudi Arabia produced 177826 research papers in Institute for Scientific Information (ISI) database and in the year 2014 alone, 26168 research papers were published in indexed science journals with a rising h-index of 144. The country is turning into a regional hub for advanced education, research, science and technology while swiftly shifting from an oil-based to a knowledge-based economy.

Modelagem para localização de hubs no transporte de encomendas expressas Modelling for location hubs in the express cargo transport

Directory of Open Access Journals (Sweden)

Javier Antonio Timaná Alamo

2006-12-01

Full Text Available Na presente pesquisa se propõe um modelo matemático de programação linear com variáveis binárias 0/1, para projetar a configuração de uma rede de distribuição de encomendas expressas, visando minimizar os custos e garantindo um bom nível de serviço. O modelo, que é uma modificação da formulação proposta por O’Kelly, define as posições dos hubs, a alocação deles às demais instalações físicas e a construção de roteiros com apenas uma parada intermediária, o que confere mais agilidade ao atendimento da demanda de transporte de carga. Considera-se a instalação de um único hub maior (Hub Principal, que serve como ponto de transbordo para os fluxos de carga entre as distintas regiões de um território, e um conjunto de terminais regionais (mini-hubs, servindo como ponto de conexão, unicamente, para os fluxos de carga existentes em um determinado raio de cobertura. Foram propostas extensões que incluem uma restrição da capacidade operacional do Hub Principal, para evitar seu congestionamento, e duas diferentes estratégias de induzir o aumento de fluxo de carga manipulado pelos mini-hubs. O modelo proposto e suas extensões foram aplicados ao estudo de um caso real, obtendo-se resultados consistentes e uma redução significativa no custo total da rede de distribuição da empresa analisada.This study proposes a mathematical model of linear programming with binary variables 0/1 to project the configuration of a distribution network for express cargo which aims to minimize costs and guarantee a high level of service. The model, which is a modification of the formulation proposed by O’Kelly, defines the position of the hubs, their allocation regarding the other physical installations, and the building of itineraries with only one intermediate stop, which increases agility in meeting the demand of cargo transport. It assumes the installation of a single, major hub (Main Hub, which serves as the transfer point for

Virtual Replication of IoT Hubs in the Cloud: A Flexible Approach to Smart Object Management

Directory of Open Access Journals (Sweden)

Simone Cirani

2018-03-01

Full Text Available In future years, the Internet of Things is expected to interconnect billions of highly heterogeneous devices, denoted as “smart objects”, enabling the development of innovative distributed applications. Smart objects are constrained sensor/actuator-equipped devices, in terms of computational power and available memory. In order to cope with the diverse physical connectivity technologies of smart objects, the Internet Protocol is foreseen as the common “language” for full interoperability and as a unifying factor for integration with the Internet. Large-scale platforms for interconnected devices are required to effectively manage resources provided by smart objects. In this work, we present a novel architecture for the management of large numbers of resources in a scalable, seamless, and secure way. The proposed architecture is based on a network element, denoted as IoT Hub, placed at the border of the constrained network, which implements the following functions: service discovery; border router; HTTP/Constrained Application Protocol (CoAP and CoAP/CoAP proxy; cache; and resource directory. In order to protect smart objects (which cannot, because of their constrained nature, serve a large number of concurrent requests and the IoT Hub (which serves as a gateway to the constrained network, we introduce the concept of virtual IoT Hub replica: a Cloud-based “entity” replicating all the functions of a physical IoT Hub, which external clients will query to access resources. IoT Hub replicas are constantly synchronized with the physical IoT Hub through a low-overhead protocol based on Message Queue Telemetry Transport (MQTT. An experimental evaluation, proving the feasibility and advantages of the proposed architecture, is presented.

Influence of Hub Parameters on Joining Forces and Torque Transmission Output of Plastically-Joined Shaft-Hub-Connections with a Knurled Contact Surface

Directory of Open Access Journals (Sweden)

Lukáš Suchý

2018-04-01

Full Text Available A knurled interference fit is a machine part connection made by a plastic joining, which includes the advantages of commonly-used shaft-hub-connections. The combination of the friction and form fit, which are responsible for torque transmission, results in a higher power density than conventional connections. In this paper, parameter gaps are bridged with the aim of enhance the design calculation of the knurled interference fit. Experimental investigations on the shaft chamfer angle (100Cr6 and hub-diameter-ratio (AlSi1MgMn were performed. The analytical approaches are developed for calculating the joining force and maximal torque capacity by accounting for experimentally investigated loss of load transmission at high hub-diameter-ratios and high shaft chamfer angles. The presented calculation approach is an accurate tool for the assessment of early machine designs of the knurled interference fit and helps to save from having to perform time-extensive tests.

Modeling and optimization of a network of energy hubs to improve economic and emission considerations

International Nuclear Information System (INIS)

Maroufmashat, Azadeh; Elkamel, Ali; Fowler, Michael; Sattari, Sourena; Roshandel, Ramin; Hajimiragha, Amir; Walker, Sean; Entchev, Evgueniy

2015-01-01

Energy hubs that incorporate a variety of energy generation and energy transformation technologies can be used to provide the energy storage needed to enable the efficient operation of a ‘smart energy network’. When these hubs are combined as a network and allowed to exchange energy, they create efficiency advantages in both financial and environmental performance. Further, the interconnectedness of the energy network design provides an added layer of reliability. In this paper, a complex network of energy hubs is modeled and optimized under different scenarios to examine both the financial viability and potential reduction of greenhouse gas emissions. Two case studies consisting of two and three energy hubs within a network are considered. The modeling Scenarios vary according to the consideration of distributed energy systems and energy interaction between energy hubs. In the case of a network of two energy hubs, there is no significant economic or emissions benefit with only a 0.5% reduction in total cost and 3% reduction in CO_2 emission. In the case of a network of three energy hubs, there is a significant economic benefit ranging from 11% to 29%, and 11% emission reduction benefit, as well as a 13% reduction in natural gas consumption. - Highlights: • The generic form of the modified energy hub concept with network model is presented. • Two case studies are presented to demonstrate the benefits of energy hub network. • Distributed energy is shown to provide economic and environmental advantages. • Multi criteria optimization of the economic and environmental performance is done.

Uses of Technology to Support Reflective Teaching Practices

Science.gov (United States)

Brent, Wayne

2010-01-01

This dissertation researched and reported on how technology was used to facilitate and inform reflective teaching practices. It also identified the characteristics of benefits and barriers in using technology for teaching and reflection. The study, descriptive in nature, was designed to determine the reflective practices of instructors and how…

Epidemics in Complex Networks: The Diversity of Hubs

Science.gov (United States)

Kitsak, Maksim; Gallos, Lazaros K.; Havlin, Shlomo; Stanley, H. Eugene; Makse, Hernan A.

2009-03-01

Many complex systems are believed to be vulnerable to spread of viruses and information owing to their high level of interconnectivity. Even viruses of low contagiousness easily proliferate the Internet. Rumors, fads, and innovation ideas are prone to efficient spreading in various social systems. Another commonly accepted standpoint is the importance of the most connected elements (hubs) in the spreading processes. We address following questions. Do all hubs conduct epidemics in the same manner? How does the epidemics spread depend on the structure of the network? What is the most efficient way to spread information over the system? We analyze several large-scale systems in the framework of of the susceptible/infective/removed (SIR) disease spread model which can also be mapped to the problem of rumor or fad spreading. We show that hubs are often ineffective in the transmission of virus or information owing to the highly heterogeneous topology of most networks. We also propose a new tool to evaluate the efficiency of nodes in spreading virus or information.

HIV protein sequence hotspots for crosstalk with host hub proteins.

Directory of Open Access Journals (Sweden)

Mahdi Sarmady

Full Text Available HIV proteins target host hub proteins for transient binding interactions. The presence of viral proteins in the infected cell results in out-competition of host proteins in their interaction with hub proteins, drastically affecting cell physiology. Functional genomics and interactome datasets can be used to quantify the sequence hotspots on the HIV proteome mediating interactions with host hub proteins. In this study, we used the HIV and human interactome databases to identify HIV targeted host hub proteins and their host binding partners (H2. We developed a high throughput computational procedure utilizing motif discovery algorithms on sets of protein sequences, including sequences of HIV and H2 proteins. We identified as HIV sequence hotspots those linear motifs that are highly conserved on HIV sequences and at the same time have a statistically enriched presence on the sequences of H2 proteins. The HIV protein motifs discovered in this study are expressed by subsets of H2 host proteins potentially outcompeted by HIV proteins. A large subset of these motifs is involved in cleavage, nuclear localization, phosphorylation, and transcription factor binding events. Many such motifs are clustered on an HIV sequence in the form of hotspots. The sequential positions of these hotspots are consistent with the curated literature on phenotype altering residue mutations, as well as with existing binding site data. The hotspot map produced in this study is the first global portrayal of HIV motifs involved in altering the host protein network at highly connected hub nodes.

Soft hub for bearingless rotors

Science.gov (United States)

Dixon, Peter G. C.

1991-01-01

Soft hub concepts which allow the direct replacement of articulated rotor systems by bearingless types without any change in controllability or need for reinforcement to the drive shaft and/or transmission/fuselage attachments of the helicopter were studied. Two concepts were analyzed and confirmed for functional and structural feasibility against a design criteria and specifications established for this effort. Both systems are gimballed about a thrust carrying universal elastomeric bearing. One concept includes a set of composite flexures for drive torque transmittal from the shaft to the rotor, and another set (which is changeable) to impart hub tilting stiffness to the rotor system as required to meet the helicopter application. The second concept uses a composite bellows flexure to drive the rotor and to augment the hub stiffness provided by the elastomeric bearing. Each concept was assessed for weight, drag, ROM cost, and number of parts and compared with the production BO-105 hub.

Innovative Technological Approach to Ebola Virus Disease Outbreak Response in Nigeria Using the Open Data Kit and Form Hub Technology.

Directory of Open Access Journals (Sweden)

Daniel Tom-Aba

Full Text Available The recent outbreak of Ebola Virus Disease (EVD in West Africa has ravaged many lives. Effective containment of this outbreak relies on prompt and effective coordination and communication across various interventions; early detection and response being critical to successful control. The use of information and communications technology (ICT in active surveillance has proved to be effective but its use in Ebola outbreak response has been limited. Due to the need for timeliness in reporting and communication for early discovery of new EVD cases and promptness in response; it became imperative to empower the response team members with technologies and solutions which would enable smooth and rapid data flow. The Open Data Kit and Form Hub technology were used in combination with the Dashboard technology and ArcGIS mapping for follow up of contacts, identification of cases, case investigation and management and also for strategic planning during the response. A remarkable improvement was recorded in the reporting of daily follow-up of contacts after the deployment of the integrated real time technology. The turnaround time between identification of symptomatic contacts and evacuation to the isolation facility and also for receipt of laboratory results was reduced and informed decisions could be taken by all concerned. Accountability in contact tracing was ensured by the use of a GPS enabled device. The use of innovative technologies in the response of the EVD outbreak in Nigeria contributed significantly to the prompt control of the outbreak and containment of the disease by providing a valuable platform for early warning and guiding early actions.

Characteristics of steady vibration in a rotating hub-beam system

Science.gov (United States)

Zhao, Zhen; Liu, Caishan; Ma, Wei

2016-02-01

A rotating beam features a puzzling character in which its frequencies and modal shapes may vary with the hub's inertia and its rotating speed. To highlight the essential nature behind the vibration phenomena, we analyze the steady vibration of a rotating Euler-Bernoulli beam with a quasi-steady-state stretch. Newton's law is used to derive the equations governing the beam's elastic motion and the hub's rotation. A combination of these equations results in a nonlinear partial differential equation (PDE) that fully reflects the mutual interaction between the two kinds of motion. Via the Fourier series expansion within a finite interval of time, we reduce the PDE into an infinite system of a nonlinear ordinary differential equation (ODE) in spatial domain. We further nondimensionalize the ODE and discretize it via a difference method. The frequencies and modal shapes of a general rotating beam are then determined numerically. For a low-speed beam where the ignorance of geometric stiffening is feasible, the beam's vibration characteristics are solved analytically. We validate our numerical method and the analytical solutions by comparing with either the past experiments or the past numerical findings reported in existing literature. Finally, systematic simulations are performed to demonstrate how the beam's eigenfrequencies vary with the hub's inertia and rotating speed.

TYPE PROJECTS HUB - AN INTERNATIONAL MODEL OF DEVELOPMENT OF THE ENTREPRENEURIAL ENVIRONMENT

Directory of Open Access Journals (Sweden)

Rozalia Nistor

2014-06-01

Full Text Available Impact Hub is a global network of local spaces and communities designed to facilitate sustainable impact through collaboration. Local Impact Hubs are autonomous companies that offer co-working spaces, programming, events platforms, and communities of individuals and organizations with ideas to build a better world. Hub was established in 2005 in London with the aim of creating a space dedicated to inspire, connect and enable people to achieve a sustainable entrepreneurial idea. The idea was simple: There are a lot of people with good ideas for a "better world". What seem to be missing are places to help these people to move from intent to action and to find like-minded for a greater impact. In Romania about four years ago, first opened in Bucharest office space hubs in Romania (for entrepreneurs in technology and business where teams from different companies could collaborate. The idea to open a hub in Bucharest focused on social innovation and entrepreneurship appeared some time ago in the context in which part of the team now has worked since 2010 at the initiation and growth of a community to support social entrepreneurship. In all this diversity, there is a common mission: “we can create if we put all our innovation capacity in the common goal to create a positive impact through our work?”

Sci-Hub: What Librarians Should Know and Do about Article Piracy.

Science.gov (United States)

Hoy, Matthew B

2017-01-01

The high cost of journal articles has driven many researchers to turn to a new way of getting access: "pirate" article sites. Sci-Hub, the largest and best known of these sites, currently offers instant access to more than 58 million journal articles. Users attracted by the ease of use and breadth of the collection may not realize that these articles are often obtained using stolen credentials and downloading them may be illegal. This article will briefly describe Sci-Hub and how it works, the legal and ethical issues it raises, and the problems it may cause for librarians. Librarians should be aware of Sci-Hub and the ways it may change their patrons' expectations. They should also understand the risks Sci-Hub can pose to their patrons and their institutions.

Supervised hub-detection for brain connectivity

DEFF Research Database (Denmark)

Kasenburg, Niklas; Liptrot, Matthew George; Reislev, Nina Linde

2016-01-01

, but can smooth discriminative signals in the population, degrading predictive performance. We present a novel hub-detection optimized for supervised learning that both clusters network nodes based on population level variation in connectivity and also takes the learning problem into account. The found......A structural brain network consists of physical connections between brain regions. Brain network analysis aims to find features associated with a parameter of interest through supervised prediction models such as regression. Unsupervised preprocessing steps like clustering are often applied...... hubs are a low-dimensional representation of the network and are chosen based on predictive performance as features for a linear regression. We apply our method to the problem of finding age-related changes in structural connectivity. We compare our supervised hub-detection (SHD) to an unsupervised hub...

Dry etching technologies for reflective multilayer

Science.gov (United States)

Iino, Yoshinori; Karyu, Makoto; Ita, Hirotsugu; Kase, Yoshihisa; Yoshimori, Tomoaki; Muto, Makoto; Nonaka, Mikio; Iwami, Munenori

2012-11-01

We have developed a highly integrated methodology for patterning Extreme Ultraviolet (EUV) mask, which has been highlighted for the lithography technique at the 14nm half-pitch generation and beyond. The EUV mask is characterized as a reflective-type mask which is completely different compared with conventional transparent-type of photo mask. And it requires not only patterning of absorber layer without damaging the underlying multi reflective layers (40 Si/Mo layers) but also etching multi reflective layers. In this case, the dry etch process has generally faced technical challenges such as the difficulties in CD control, etch damage to quartz substrate and low selectivity to the mask resist. Shibaura Mechatronics ARESTM mask etch system and its optimized etch process has already achieved the maximal etch performance at patterning two-layered absorber. And in this study, our process technologies of multi reflective layers will be evaluated by means of optimal combination of process gases and our optimized plasma produced by certain source power and bias power. When our ARES™ is used for multilayer etching, the user can choose to etch the absorber layer at the same time or etch only the multilayer.

Technologically Reflective Individuals as Enablers of Social Innovation*

Science.gov (United States)

Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

2015-01-01

This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco‐challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy‐to‐administer multi‐item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co‐creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process. PMID:27134342

Technologically Reflective Individuals as Enablers of Social Innovation.

Science.gov (United States)

Schweitzer, Fiona; Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

2015-11-01

This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco-challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy-to-administer multi-item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co-creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process.

Classification of gene expression data: A hubness-aware semi-supervised approach.

Science.gov (United States)

Buza, Krisztian

2016-04-01

Classification of gene expression data is the common denominator of various biomedical recognition tasks. However, obtaining class labels for large training samples may be difficult or even impossible in many cases. Therefore, semi-supervised classification techniques are required as semi-supervised classifiers take advantage of unlabeled data. Gene expression data is high-dimensional which gives rise to the phenomena known under the umbrella of the curse of dimensionality, one of its recently explored aspects being the presence of hubs or hubness for short. Therefore, hubness-aware classifiers have been developed recently, such as Naive Hubness-Bayesian k-Nearest Neighbor (NHBNN). In this paper, we propose a semi-supervised extension of NHBNN which follows the self-training schema. As one of the core components of self-training is the certainty score, we propose a new hubness-aware certainty score. We performed experiments on publicly available gene expression data. These experiments show that the proposed classifier outperforms its competitors. We investigated the impact of each of the components (classification algorithm, semi-supervised technique, hubness-aware certainty score) separately and showed that each of these components are relevant to the performance of the proposed approach. Our results imply that our approach may increase classification accuracy and reduce computational costs (i.e., runtime). Based on the promising results presented in the paper, we envision that hubness-aware techniques will be used in various other biomedical machine learning tasks. In order to accelerate this process, we made an implementation of hubness-aware machine learning techniques publicly available in the PyHubs software package (http://www.biointelligence.hu/pyhubs) implemented in Python, one of the most popular programming languages of data science. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Capacitated Bounded Cardinality Hub Routing Problem: Model and Solution Algorithm

OpenAIRE

Gelareha, Shahin; Monemic, Rahimeh Neamatian; Semetd, Frederic

2017-01-01

In this paper, we address the Bounded Cardinality Hub Location Routing with Route Capacity wherein each hub acts as a transshipment node for one directed route. The number of hubs lies between a minimum and a maximum and the hub-level network is a complete subgraph. The transshipment operations take place at the hub nodes and flow transfer time from a hub-level transporter to a spoke-level vehicle influences spoke- to-hub allocations. We propose a mathematical model and a branch-and-cut algor...

Hub network design for sparse travel demand within the African aviation industry

CSIR Research Space (South Africa)

Ssamula, B

2007-07-01

Full Text Available and analysed to reveal that the best option for a hub network is the so-called geo-political network. A geo-political network is where hubs are created in the North, South, East and West of Africa, at airports with strong political influence, high passenger...

THE ROLE OF AUTOMOBILE TRANSPORT IN HUBS SERVICE

Directory of Open Access Journals (Sweden)

Kirill Iurievich Bely

2015-09-01

Full Text Available Article contains approaches to development and functioning of transport-logistic nodes – hubs – in modern conditions. There is hub classification and examples of them on different transport modes. An important component in providing reliability of hub work is automobile transport.

From research to self-reflection: learning about ourselves as academics through a support group's resistance to our intervention.

Science.gov (United States)

Scherr, Courtney Lynam; Mattson, Marifran

2012-01-01

Purdue University's Center for Healthcare Engineering developed a computer-assisted technology hub (CATHUB) designed to aid individuals with disabilities. Upon realizing the lack of input from the very individuals they were trying to help, Marifran approached the developers of CATHUB and offered to engage a group of amputees to aid in the design and implementation of the hub. In this essay, Courtney and Marifran recount, each from their own perspective, their experiences working with Amputees in Action as participants in their research project. Ultimately the researchers discovered their research agenda was not compatible with the amputees' needs, resulting in enlightened self-reflection by the researchers and abandonment of the research project.

Development of Europe's gas hubs: Implications for East Asia

Directory of Open Access Journals (Sweden)

Xunpeng Shi

2016-10-01

Full Text Available Gas trading hubs have been initially developed in the US in 1980s, UK in 1990s, more recently in European in the 2000s and mulled in East Asia now. Due to its freshness and diversification in nationality, governance and culture, the European hub experience can offer valuable lessons for East Asia. This paper seeks to advance understanding of gas hub development in Europe and provide lessons for East Asia. The European experience highlights that market liberalization and transition of gas pricing mechanism are necessary in creating the competitive markets that are needed for functional gas hubs. Political will and regulations further safeguard the competition environment needed for hub development. Natural factors, such as significant domestic production and culture could have a significant impact on the hub development and transition of pricing mechanism. In East Asia, the path to gas trading hubs might be more difficult than in Europe but a growing market creates an opportunity to start new terms with new contracts. Nevertheless, East Asian needs to work hard to development its indigenous gas or LNG trading hubs.

Multiple Hub Network Choice in the Liberalized European Market

Science.gov (United States)

Berechman, Joseph; deWit, Jaap

1997-01-01

. In the meantime, open skies agreements have been concluded between the USA and most of the EU member states to facilitate strategic alliances between airlines of the states involved. As a result of this on-going liberalization the model of the single 'national' carrier using the national home base as its single hub for the designated third, fourth and sixth freedom operations will stepwise disappear. Within the EU the concept of the national carrier has already been replaced by that of the community carrier. State ownership in more and more European carriers is reduced. On the longer run mergers or even bankruptcy will further undermine the "single national carrier - single national hub" model in Europe. In the meantime, strategic alliances between national carriers in Europe will already reduce the airlines' loyalty to a single airport. Profit maximization and accountability to share holders will supersede the loyalty of these newly emerging alliances, probably looking for the opportunities of a multiple hub network to adequately cover the whole European market. As a consequence, some European airports might see a substantial decline in arriving, departing and transfer traffic, thus in revenues and financial solvency, as well as in their connection to other inter-continental and intra-European destinations. At the same time, other airports might realize a significant increase in traffic as they will be sought after by the profit maximizing airlines as their major gateway hubs. Which will be the losing airports and which will be the winning ones? Can airports anticipate the actions of airlines in deregulated markets and utilize policies which will improve their relative position? If so, what should be these anticipatory policies? These questions become the more urgent, since an increasing number of major European airports will be privatized in the near future. Although increasing airport congestion in Europe will also be reflected in a growing demand pressure for

Virtual Campus Hub technical evaluation report

DEFF Research Database (Denmark)

Vercoulen, Frank; Badger, Merete; Monaco, Lucio

This report describes and discusses the technical achievements of the Virtual Campus Hub project and formulates a brief agenda for the future.......This report describes and discusses the technical achievements of the Virtual Campus Hub project and formulates a brief agenda for the future....

Multiple-Localization and Hub Proteins

Science.gov (United States)

Ota, Motonori; Gonja, Hideki; Koike, Ryotaro; Fukuchi, Satoshi

2016-01-01

Protein-protein interactions are fundamental for all biological phenomena, and protein-protein interaction networks provide a global view of the interactions. The hub proteins, with many interaction partners, play vital roles in the networks. We investigated the subcellular localizations of proteins in the human network, and found that the ones localized in multiple subcellular compartments, especially the nucleus/cytoplasm proteins (NCP), the cytoplasm/cell membrane proteins (CMP), and the nucleus/cytoplasm/cell membrane proteins (NCMP), tend to be hubs. Examinations of keywords suggested that among NCP, those related to post-translational modifications and transcription functions are the major contributors to the large number of interactions. These types of proteins are characterized by a multi-domain architecture and intrinsic disorder. A survey of the typical hub proteins with prominent numbers of interaction partners in the type revealed that most are either transcription factors or co-regulators involved in signaling pathways. They translocate from the cytoplasm to the nucleus, triggered by the phosphorylation and/or ubiquitination of intrinsically disordered regions. Among CMP and NCMP, the contributors to the numerous interactions are related to either kinase or ubiquitin ligase activity. Many of them reside on the cytoplasmic side of the cell membrane, and act as the upstream regulators of signaling pathways. Overall, these hub proteins function to transfer external signals to the nucleus, through the cell membrane and the cytoplasm. Our analysis suggests that multiple-localization is a crucial concept to characterize groups of hub proteins and their biological functions in cellular information processing. PMID:27285823

Robust Energy Hub Management Using Information Gap Decision Theory

DEFF Research Database (Denmark)

Javadi, Mohammad Sadegh; Anvari-Moghaddam, Amjad; Guerrero, Josep M.

2017-01-01

This paper proposes a robust optimization framework for energy hub management. It is well known that the operation of energy systems can be negatively affected by uncertain parameters, such as stochastic load demand or generation. In this regard, it is of high significance to propose efficient...... tools in order to deal with uncertainties and to provide reliable operating conditions. On a broader scale, an energy hub includes diverse energy sources for supplying both electrical load and heating/cooling demands with stochastic behaviors. Therefore, this paper utilizes the Information Decision Gap...

Hub location proplems under polyhedral demand uncertainty

OpenAIRE

Meraklı, Merve

2015-01-01

Cataloged from PDF version of thesis. Includes bibliographical references (leaves 69-74). Thesis (M.S.): Bilkent University, Department of Industrial Engineering, İhsan Doğramacı Bilkent University, 2015. Hubs are points of consolidation and transshipment in many-to-many distribution systems that bene t from economies of scale. In hub location problems, the aim is to locate hub facilities such that each pairwise demand is satis ed and the total cost is minimized. The problem...

Competition and coordination in the U.S. airline hub-to-hub markets: An industry pre-merger case study

Directory of Open Access Journals (Sweden)

Prasun Bhattacharjee

2016-04-01

Full Text Available Purpose: This paper investigates the nature of conduct that existed in the U.S. airline hub-to-hub markets prior to the recent merger wave of the legacy carriers. We explore the strategic importance of network carrier hubs in form of “spheres of influence” on airline market conduct. We also simultaneously recognize the overgrowing role played by Low Cost Carriers (LCC over the years by estimating two conduct parameters - one in markets where LCCs directly compete head-to-head with legacy carriers and the other for markets which LCCs do not serve but has presence in the hub airports or adjacent airports comprising the market endpoints. Thus our supply side framework also sheds some light on the issue of perfect contestability in airline industry. Design/methodology/approach: We estimate a structural oligopoly model for differentiated products with competitive interactions using DB1B data for first quarter of 2004. Findings: Our results imply that the nature of competition is more aggressive relative to Bertrand behavior in hub-to-hub markets and that these markets are less than perfectly contestable. Originality/value: This paper adds to the empirical literature of airline competition by enabling estimation of the actual conduct parameter assuming firm price setting behavior in presence of product differentiation. Contrary to existing literature on airline competition, a structural model enables us to systematically separate out effects of demand, cost and strategic factors on observed airline prices.

Assessing inspection sensitivity as it relates to damage tolerance in composite rotor hubs

Science.gov (United States)

Roach, Dennis P.; Rackow, Kirk

2001-08-01

Increasing niche applications, growing international markets, and the emergence of advanced rotorcraft technology are expected to greatly increase the population of helicopters over the next decade. In terms of fuselage fatigue, helicopters show similar trends as fixed-wing aircraft. The highly unsteady loads experienced by rotating wings not only directly affect components in the dynamic systems but are also transferred to the fixed airframe structure. Expanded use of rotorcraft has focused attention on the use of new materials and the optimization of maintenance practices. The FAA's Airworthiness Assurance Center (AANC) at Sandia National Labs has joined with Bell Helicopter andother agencies in the rotorcraft industry to evaluate nondestructive inspection (NDI) capabilities in light of the damage tolerance of assorted rotorcraft structure components. Currently, the program's emphasis is on composite rotor hubs. The rotorcraft industry is constantly evaluating new types of lightweight composite materials that not only enhance the safety and reliability of rotor components but also improve performance and extended operating life as well. Composite rotor hubs have led to the use of bearingless rotor systems that are less complex and require less maintenance than their predecessors. The test facility described in this paper allows the structural stability and damage tolerance of composite hubs to be evaluated using realistic flight load spectrums of centrifugal force and bending loads. NDI was integrated into the life-cycle fatigue tests in order to evaluate flaw detection sensitivity simultaneously wiht residual strength and general rotor hub peformance. This paper will describe the evolving use of damage tolerance analysis (DTA) to direct and improve rotorcraft maintenance along with the related use of nondestructive inspections to manage helicopter safety. OVeralll, the data from this project will provide information to improve the producibility, inspectability

Why do European companies have Innovation Hubs in Silicon Valley

DEFF Research Database (Denmark)

Berger, Andreas; Brem, Alexander

2017-01-01

Innovation hubs are gaining high attention in recent years, especially from European companies. Silicon Valley has been deemed as one of the most attractive and successful environments for establishing innovation hubs. This article highlights examples of companies from Europe that made the step...... to California—namely, Volkswagen, Swisscom, BMW, Axel Springer, Munich Re, and Innogy SE (RWE Group). Based on these companies’ experiences, recommendations are given on how companies might approach a setup in Silicon Valley for long-term success....

Numerical study of hub taper angle on podded propeller performance

International Nuclear Information System (INIS)

Islam, M.F.; Veitch, B.; Bose, N.; Liu, P.

2005-01-01

Presently, the majority of podded propulsion systems are of the pulling type, because this type provides better hydrodynamic efficiency than the pushing type. There are several possible explanations for the better overall performance of a puller type podded propulsor. One is related to the difference in hub shape. Puller and pusher propellers have opposite hub taper angles, hence different hub and blade root shape. These differences cause changes in the flow condition and possibly influence the overall performance. The current study focuses on the variation in performance of pusher and puller propellers with the same blade sections, but different hub taper angles. A hyperboloidal low order source doublet steady/unsteady time domain panel method code was modified and used to evaluate effects of hub taper angle on the open water propulsive performance of some fixed pitch screw propellers used in podded propulsion systems. The modified code was first validated against measurements of two model propellers in terms of average propulsive performance and good agreement was found. Major findings include significant effects of hub taper angle on propulsive performance of tapered hub propellers and noticeable effects of hub taper angle on sectional pressure distributions of tapered hub propeller blades. (author)

Design and Development of an Integrated Workstation Automation Hub

Energy Technology Data Exchange (ETDEWEB)

Weber, Andrew; Ghatikar, Girish; Sartor, Dale; Lanzisera, Steven

2015-03-30

Miscellaneous Electronic Loads (MELs) account for one third of all electricity consumption in U.S. commercial buildings, and are drivers for a significant energy use in India. Many of the MEL-specific plug-load devices are concentrated at workstations in offices. The use of intelligence, and integrated controls and communications at the workstation for an Office Automation Hub – offers the opportunity to improve both energy efficiency and occupant comfort, along with services for Smart Grid operations. Software and hardware solutions are available from a wide array of vendors for the different components, but an integrated system with interoperable communications is yet to be developed and deployed. In this study, we propose system- and component-level specifications for the Office Automation Hub, their functions, and a prioritized list for the design of a proof-of-concept system. Leveraging the strength of both the U.S. and India technology sectors, this specification serves as a guide for researchers and industry in both countries to support the development, testing, and evaluation of a prototype product. Further evaluation of such integrated technologies for performance and cost is necessary to identify the potential to reduce energy consumptions in MELs and to improve occupant comfort.

Global Dynamics and International Cooperation Needs of RT Development and Utilization for the Establishment of the Northeast Asia RT Hub in Korea

Energy Technology Data Exchange (ETDEWEB)

Kim, Y. K.; Oh, G. B.; Yun, S. W.; Yang, M. H.; Ryu, J. S.; Choi, S. J.; Choi, S. G

2005-11-15

In an effort to achieve the objectives, the following scopes were categorized for in-depth study. First, analysis framework was developed for RT capacity development and international technology cooperation strategy. RT survey checklist and international technology cooperation was analyzed with interviewing and reports of domestic participants recently. Second, RT strategic environment was analyze for East-Asia hub competition/cooperation and developing nations using analysis framework. Korean RT was analyzed using SWOT analysis for establishment of RT hub in Korea. Third, East-Asian nations were classified analyzed by RT categories in standpoint of our country. Technology status and future cooperation plan were discussed about RT application for bio-medicine. Products/technology seminar related to an export was hold about support plan of admission/sales for functional food HemoHIM. This study can be utilized in the establishment of RT hub and development strategy. And it can be also utilized in promotion devising of domestic RT and planning setup for obtaing the international competitive power.

Global Dynamics and International Cooperation Needs of RT Development and Utilization for the Establishment of the Northeast Asia RT Hub in Korea

International Nuclear Information System (INIS)

Kim, Y. K.; Oh, G. B.; Yun, S. W.; Yang, M. H.; Ryu, J. S.; Choi, S. J.; Choi, S. G.

2005-11-01

In an effort to achieve the objectives, the following scopes were categorized for in-depth study. First, analysis framework was developed for RT capacity development and international technology cooperation strategy. RT survey checklist and international technology cooperation was analyzed with interviewing and reports of domestic participants recently. Second, RT strategic environment was analyze for East-Asia hub competition/cooperation and developing nations using analysis framework. Korean RT was analyzed using SWOT analysis for establishment of RT hub in Korea. Third, East-Asian nations were classified analyzed by RT categories in standpoint of our country. Technology status and future cooperation plan were discussed about RT application for bio-medicine. Products/technology seminar related to an export was hold about support plan of admission/sales for functional food HemoHIM. This study can be utilized in the establishment of RT hub and development strategy. And it can be also utilized in promotion devising of domestic RT and planning setup for obtaing the international competitive power

Flow Structures within a Helicopter Rotor Hub Wake

Science.gov (United States)

Elbing, Brian; Reich, David; Schmitz, Sven

2015-11-01

A scaled model of a notional helicopter rotor hub was tested in the 48'' Garfield Thomas Water Tunnel at the Applied Research Laboratory Penn State. The measurement suite included total hub drag and wake velocity measurements (LDV, PIV, stereo-PIV) at three downstream locations. The main objective was to understand the spatiotemporal evolution of the unsteady wake between the rotor hub and the nominal location of the empennage (tail). Initial analysis of the data revealed prominent two- and four-per-revolution fluid structures linked to geometric hub features persisting into the wake far-field. In addition, a six-per-revolution fluid structure was observed in the far-field, which is unexpected due to the lack of any hub feature with the corresponding symmetry. This suggests a nonlinear interaction is occurring within the wake to generate these structures. This presentation will provide an overview of the experimental data and analysis with particular emphasis on these six-per-revolution structures.

Preliminary design study of advanced composite blade and hub and nonmechanical control system for the tilt-rotor aircraft. Volume 1: Engineering studies

Science.gov (United States)

Alexander, H. R.; Smith, K. E.; Mcveigh, M. A.; Dixon, P. G.; Mcmanus, B. L.

1979-01-01

Composite structures technology is applied in a preliminary design study of advanced technology blades and hubs for the XV-15 tilt rotor research demonstrator aircraft. Significant improvements in XV-15 hover and cruise performance are available using blades designed for compatibility with the existing aircraft, i.e., blade installation would not require modification of the airframe, hub or upper controls. Provision of a low risk nonmechanical control system was also studied, and a development specification is given.

Logistics hubs: an integration of transport infrastructure

CSIR Research Space (South Africa)

Botha, M

2008-07-01

Full Text Available " that have jumped on the band wagon pushing for logistics hubs to be established in their regions or within their areas of jurisdiction. The feasibility of a logistics hub is dependent on a number of criteria with access to ideally more than two...

KNOWLEDGE HUB: SPIRAL MATRIX THINKING AS A COMMUNICATION TECHNOLOGY FOR INDIVIDUAL AND GROUP LEARNING IN ONE DRIVE AND WORD ONLINE

Directory of Open Access Journals (Sweden)

Наталья Валерьевна Комиссарова

2017-12-01

Full Text Available The article represents the modification of the Knowledge Hub communicative technique of teaching English and other disciplines based on the OneDrive\\Word-online cloud service. Specific options for the organization of group work and individual activities are considered. The article highlights the advantage and the efficiency of teaching and learning by the BYOD (Bring Your Own Device mode. The paper includes examples of organizing of mass support of the study of the course of English for Business and Entrepreneurship (MOOC-Coursera and of information technology of the Humanities program in the computer class and relying on BYOD mobile Internet access of students.

Transaction hubs: can tame energy market communications

Energy Technology Data Exchange (ETDEWEB)

Hamilos, C.

2002-07-01

The nature and function of transaction hubs is described in view of their growing usefulness as electric industry deregulation takes hold and with it the urgent requirement for trading partners to exchange information quickly and efficiently. The paper stresses the many difficulties involved in communications between trading partners since each partner operates under a different set of business rules, with the result that there are 'language differences' to overcome, not to mention the sheer volume of data that must be handled. To make it all work, companies turn increasingly to products like communication hubs. They are able to overcome the fact that different companies have different systems, different data formats and different business rules, and are able to help companies to package, transmit, receive and process information. The principal advantage of a hub is that no one has to learn anyone else's interface. Everyone can continue to use their own data format and transaction models. The hub supplies the protocols and processing rules needed to work with any of the partners connected to the hub. In order to achieve the level of efficiency and reliability required in a hub, certain design principles must be satisfied. These are : scalability, facilities for load balancing, availability of standard routine services, ability to recognize a process as consisting of various transactions, and a transaction as belonging to a specific process, ability to allow the user to configure expiration times around the business processes according to market rules, facility to easily configure validation rules, ability to handle exceptions, ability to interoperate with many middle-ware products, and to manage work flow in a manner that is transparent to operating personnel.

Features analysis for identification of date and party hubs in protein interaction network of Saccharomyces Cerevisiae

Directory of Open Access Journals (Sweden)

Araabi Babak N

2010-12-01

Full Text Available Abstract Background It has been understood that biological networks have modular organizations which are the sources of their observed complexity. Analysis of networks and motifs has shown that two types of hubs, party hubs and date hubs, are responsible for this complexity. Party hubs are local coordinators because of their high co-expressions with their partners, whereas date hubs display low co-expressions and are assumed as global connectors. However there is no mutual agreement on these concepts in related literature with different studies reporting their results on different data sets. We investigated whether there is a relation between the biological features of Saccharomyces Cerevisiae's proteins and their roles as non-hubs, intermediately connected, party hubs, and date hubs. We propose a classifier that separates these four classes. Results We extracted different biological characteristics including amino acid sequences, domain contents, repeated domains, functional categories, biological processes, cellular compartments, disordered regions, and position specific scoring matrix from various sources. Several classifiers are examined and the best feature-sets based on average correct classification rate and correlation coefficients of the results are selected. We show that fusion of five feature-sets including domains, Position Specific Scoring Matrix-400, cellular compartments level one, and composition pairs with two and one gaps provide the best discrimination with an average correct classification rate of 77%. Conclusions We study a variety of known biological feature-sets of the proteins and show that there is a relation between domains, Position Specific Scoring Matrix-400, cellular compartments level one, composition pairs with two and one gaps of Saccharomyces Cerevisiae's proteins, and their roles in the protein interaction network as non-hubs, intermediately connected, party hubs and date hubs. This study also confirms the

An Endosymbiotic Evolutionary Algorithm for the Hub Location-Routing Problem

Directory of Open Access Journals (Sweden)

Ji Ung Sun

2015-01-01

Full Text Available We consider a capacitated hub location-routing problem (HLRP which combines the hub location problem and multihub vehicle routing decisions. The HLRP not only determines the locations of the capacitated p-hubs within a set of potential hubs but also deals with the routes of the vehicles to meet the demands of customers. This problem is formulated as a 0-1 mixed integer programming model with the objective of the minimum total cost including routing cost, fixed hub cost, and fixed vehicle cost. As the HLRP has impractically demanding for the large sized problems, we develop a solution method based on the endosymbiotic evolutionary algorithm (EEA which solves hub location and vehicle routing problem simultaneously. The performance of the proposed algorithm is examined through a comparative study. The experimental results show that the proposed EEA can be a viable solution method for the supply chain network planning.

Lean GHTorrent : GitHub data on demand

NARCIS (Netherlands)

Gousios, G.; Vasilescu, B.N.; Serebrenik, A.; Zaidman, A.

2014-01-01

In recent years, GitHub has become the largest code host in the world, with more than 5M developers collaborating across 10M repositories. Numerous popular open source projects (such as Ruby on Rails, Homebrew, Bootstrap, Django or jQuery) have chosen GitHub as their host and have migrated their

Identification of promising Twin Hub networks : Report of Work Package 1 of the Intermodal rail freight Twin hub Network Northwest Europe - project (final report)

NARCIS (Netherlands)

Kreutzberger, E.D.; Konings, J.W.; Meijer, S.; Witteveen, C.; Meijers, B.M.; Pekin, E.; Macharis, C.; Kiel, J.; Kawabata, Y.; Vos, W.

2014-01-01

This report is the first deliverable of the project Intermodal Rail Freight Twin Hub Network Northwest Europe. We call its subject Twin hub network and the organisational entity to carry out the actions the Twin hub project. The project is funded by INTERREG NWE (programme IVb). Its work started in

Location of Urban Logistic Terminals as Hub Location Problem

Directory of Open Access Journals (Sweden)

Jasmina Pašagić Škrinjar

2012-09-01

Full Text Available In this paper the problems of locating urban logistic terminals are studied as hub location problems that due to a large number of potential nodes in big cities belong to hard non-polynomial problems, the so-called NP-problems. The hub location problems have found wide application in physical planning of transport and telecommunication systems, especially systems of fast delivery, networks of logistic and distribution centres and cargo traffic terminals of the big cities, etc. The paper defines single and multiple allocations and studies the numerical examples. The capacitated single allocation hub location problems have been studied, with the provision of a mathematical model of selecting the location for the hubs on the network. The paper also presents the differences in the possibilities of implementing the exact and heuristic methods to solve the actual location problems of big dimensions i.e. hub problems of the big cities.

Technology Integration and Innovation during Reflective Teaching

Science.gov (United States)

Baporikar, Neeta

2016-01-01

With emerging innovations, the use of technology tools to make learning process effective is foreseeable. Hence, appropriate incorporation of technology can make a valuable contribution to the learning and undoubtedly reflection is core to learning. With today's twenty-first century learners, it is important that educators advocate integrating…

Economic Impact of the Dutch Gas Hub Strategy on the Netherlands

International Nuclear Information System (INIS)

Harris, D.; Bazelon, C.; Humphreys, B.; Dickson, P.

2010-09-01

Since the discovery of the Groningen gas field in 1959, the Netherlands has been a key player in the European gas market. The Netherlands has built up a large onshore and offshore Exploration and Production sector, it has a highly developed gas transmission and distribution network, and is a major exporter of gas to other EU Member States. The Netherlands has considerable expertise in all parts of the gas supply chain, and is a world centre for Research and development in natural gas supply and use. More recently construction has begun on terminals to allow the import of Liquid Natural Gas to the Netherlands. However, Dutch gas reserves are now in decline, and the Netherlands will become a net importer of gas around 2025. The Dutch government wishes to capitalise on the existing industry and skills and sustain the Netherlands' place in the European gas industry beyond the life of the existing gas fields. In November 2009 the Minister of Economic Affairs published a paper describing the strategy of turning the Netherlands into a 'Gas Hub' or 'gas roundabout' for north-west Europe. The Dutch government intends that the gas hub would capitalise on the existing skills and industry, increase competition and security of supply in the Dutch gas market, create employment and make a significant contribution to the Dutch economy. The Dutch Ministry of Economic Affairs, Agriculture and Innovation has commissioned The Brattle Group to perform an analysis of the economic impact of the gas hub concept. The study has several aims including: To analyse the current contribution of the Dutch gas sector to the economy; To assess the Strengths, Weaknesses, Opportunities and Threats associated with the gas hub strategy; To quantify the benefits of the gas hub strategy to the Dutch economy. Note that the aim of the study is to define in more detail what a successful Dutch gas hub strategy would look like, to assess the strengths and weakness of the Dutch gas sector in achieving a

Virtual Hubs for facilitating access to Open Data

Science.gov (United States)

Mazzetti, Paolo; Latre, Miguel Á.; Ernst, Julia; Brumana, Raffaella; Brauman, Stefan; Nativi, Stefano

2015-04-01

In October 2014 the ENERGIC-OD (European NEtwork for Redistributing Geospatial Information to user Communities - Open Data) project, funded by the European Union under the Competitiveness and Innovation framework Programme (CIP), has started. In response to the EU call, the general objective of the project is to "facilitate the use of open (freely available) geographic data from different sources for the creation of innovative applications and services through the creation of Virtual Hubs". In ENERGIC-OD, Virtual Hubs are conceived as information systems supporting the full life cycle of Open Data: publishing, discovery and access. They facilitate the use of Open Data by lowering and possibly removing the main barriers which hampers geo-information (GI) usage by end-users and application developers. Data and data services heterogeneity is recognized as one of the major barriers to Open Data (re-)use. It imposes end-users and developers to spend a lot of effort in accessing different infrastructures and harmonizing datasets. Such heterogeneity cannot be completely removed through the adoption of standard specifications for service interfaces, metadata and data models, since different infrastructures adopt different standards to answer to specific challenges and to address specific use-cases. Thus, beyond a certain extent, heterogeneity is irreducible especially in interdisciplinary contexts. ENERGIC-OD Virtual Hubs address heterogeneity adopting a mediation and brokering approach: specific components (brokers) are dedicated to harmonize service interfaces, metadata and data models, enabling seamless discovery and access to heterogeneous infrastructures and datasets. As an innovation project, ENERGIC-OD will integrate several existing technologies to implement Virtual Hubs as single points of access to geospatial datasets provided by new or existing platforms and infrastructures, including INSPIRE-compliant systems and Copernicus services. ENERGIC OD will deploy a

Optimum hub height of a wind turbine for maximizing annual net profit

International Nuclear Information System (INIS)

Lee, Jaehwan; Kim, Dong Rip; Lee, Kwan-Soo

2015-01-01

Highlights: • Annual Net Profit was proposed to optimize the hub height of a wind turbine. • Procedures of the hub height optimization method were introduced. • Effect of local wind speed characteristics on optimum hub height was illustrated. • Effect of rated power on optimum hub height was negligible in the range 0.75–3 MW. • Rated speed and cut-out speed had great effects on optimum hub height. - Abstract: The optimization method of the hub height, which can ensure the economic feasibility of the wind turbine, is proposed in this study. Annual Net Profit is suggested as an objective function and the optimization procedure is developed. The effects of local wind speed and wind turbine power characteristics on the optimum hub height are investigated. The optimum hub height decreased as the mean wind speed and wind shear exponent increased. Rated power had little effect on optimum hub height; it follows that the economies of scale are negligible in the rated power range of 0.75–3 MW. Among the wind turbine power characteristics, rated speed and cut-out speed most strongly affected the optimum hub height

Dynamically Allocated Hub in Task-Evoked Network Predicts the Vulnerable Prefrontal Locus for Contextual Memory Retrieval in Macaques.

Directory of Open Access Journals (Sweden)

Takahiro Osada

2015-06-01

Full Text Available Neuroimaging and neurophysiology have revealed that multiple areas in the prefrontal cortex (PFC are activated in a specific memory task, but severity of impairment after PFC lesions is largely different depending on which activated area is damaged. The critical relationship between lesion sites and impairments has not yet been given a clear mechanistic explanation. Although recent works proposed that a whole-brain network contains hubs that play integrative roles in cortical information processing, this framework relying on an anatomy-based structural network cannot account for the vulnerable locus for a specific task, lesioning of which would bring impairment. Here, we hypothesized that (i activated PFC areas dynamically form an ordered network centered at a task-specific "functional hub" and (ii the lesion-effective site corresponds to the "functional hub," but not to a task-invariant "structural hub." To test these hypotheses, we conducted functional magnetic resonance imaging experiments in macaques performing a temporal contextual memory task. We found that the activated areas formed a hierarchical hub-centric network based on task-evoked directed connectivity, differently from the anatomical network reflecting axonal projection patterns. Using a novel simulated-lesion method based on support vector machine, we estimated severity of impairment after lesioning of each area, which accorded well with a known dissociation in contextual memory impairment in macaques (impairment after lesioning in area 9/46d, but not in area 8Ad. The predicted severity of impairment was proportional to the network "hubness" of the virtually lesioned area in the task-evoked directed connectivity network, rather than in the anatomical network known from tracer studies. Our results suggest that PFC areas dynamically and cooperatively shape a functional hub-centric network to reallocate the lesion-effective site depending on the cognitive processes, apart from

Strategic analysis on establishing a natural gas trading hub in China

Directory of Open Access Journals (Sweden)

Xiaoguang Tong

2014-12-01

Full Text Available Since 2010, the LNG importing price premium in the Asia–Pacific markets has become increasingly high, generating great effects on the economic development in China. In addition, the natural gas dependence degree is expanding continuously, making it extremely urgent to establish a natural gas trading hub in China, with the aim to ensure national energy security, to gain the pricing power, and to build the regional benchmark prices. Through a comparative analysis of internal strength/weakness and external competitiveness, we concluded that with intensively-issued supporting policies on the natural gas sector, the initiation of spot and futures markets, the rapid growth of gas production and highly-improved infrastructures, as well as Shanghai's advantageous location, China has more advantages in establishing an Asian Natural Gas Trading Hub than other counties like Singapore, Japan and Malaysia. Moreover, based on the SWOT (strength, weakness, opportunity and threat and the marketization process analysis, the following strategies were presented: to impel the establishment of a natural gas trading hub depending on the gas supply condition, to follow the policies to complete the gas storage system, to form regional communities by taking comparative advantages, and to reinforce the marketization reform and regulation system establishment with foreign experiences for reference. This study rationalized the necessity and practicality of establishing a natural gas trading hub in China and will help China make a proper decision and find a periodical strategic path in this sector.

WetDATA Hub: Democratizing Access to Water Data to Accelerate Innovation through Data Visualization, Predictive Analytics and Artificial Intelligence Applications

Science.gov (United States)

Sarni, W.

2017-12-01

Water scarcity and poor quality impacts economic development, business growth, and social well-being. Water has become, in our generation, the foremost critical local, regional, and global issue of our time. Despite these needs, there is no water hub or water technology accelerator solely dedicated to water data and tools. There is a need by the public and private sectors for vastly improved data management and visualization tools. This is the WetDATA opportunity - to develop a water data tech hub dedicated to water data acquisition, analytics, and visualization tools for informed policy and business decisions. WetDATA's tools will help incubate disruptive water data technologies and accelerate adoption of current water data solutions. WetDATA is a Colorado-based (501c3), global hub for water data analytics and technology innovation. WetDATA's vision is to be a global leader in water information, data technology innovation and collaborate with other US and global water technology hubs. ROADMAP * Portal (www.wetdata.org) to provide stakeholders with tools/resources to understand related water risks. * The initial activities will provide education, awareness and tools to stakeholders to support the implementation of the Colorado State Water Plan. * Leverage the Western States Water Council Water Data Exchange database. * Development of visualization, predictive analytics and AI tools to engage with stakeholders and provide actionable data and information. TOOLS Education: Provide information on water issues and risks at the local, state, national and global scale. Visualizations: Development of data analytics and visualization tools based upon the 2030 Water Resources Group methodology to support the implementation of the Colorado State Water Plan. Predictive Analytics: Accessing publically available water databases and using machine learning to develop water availability forecasting tools, and time lapse images to support city / urban planning.

Report on survey on international hub

International Nuclear Information System (INIS)

Ebisawa, Hirobumi; Hoshino, Junko; Hashimoto, Kazuichiro; Okada, Sohei

2011-06-01

Japan Atomic Energy Agency (JAEA) is promoting initiative to form an international hub in line with its aim to accept more researchers/engineers from all over the world. Establishment of 'the Committee for JAEA Internationalization Initiative' was planned in 2010 so as to intensify this initiative, and in February, 2010, we visited research institutions in Europe, which include European Organization for Nuclear Research (CERN), the construction site of ITER in Cadarache, and Rutherford Appleton Laboratory (RAL), with the intention to survey and learn their advanced activities and systems in regard to the International Hub, so that the committee will be able to make fruitful discussion. This report describes strategy taken in each institution for an International Hub, and the state of each institution regarding acceptance and management of overseas researchers and engineers, research environment, living environment/health and welfare, and PR activities/coexistence with the local community. (author)

Brokered virtual hubs for facilitating access and use of geospatial Open Data

Science.gov (United States)

Mazzetti, Paolo; Latre, Miguel; Kamali, Nargess; Brumana, Raffaella; Braumann, Stefan; Nativi, Stefano

2016-04-01

Open Data is a major trend in current information technology scenario and it is often publicised as one of the pillars of the information society in the near future. In particular, geospatial Open Data have a huge potential also for Earth Sciences, through the enablement of innovative applications and services integrating heterogeneous information. However, open does not mean usable. As it was recognized at the very beginning of the Web revolution, many different degrees of openness exist: from simple sharing in a proprietary format to advanced sharing in standard formats and including semantic information. Therefore, to fully unleash the potential of geospatial Open Data, advanced infrastructures are needed to increase the data openness degree, enhancing their usability. In October 2014, the ENERGIC OD (European NEtwork for Redistributing Geospatial Information to user Communities - Open Data) project, funded by the European Union under the Competitiveness and Innovation framework Programme (CIP), has started. In response to the EU call, the general objective of the project is to "facilitate the use of open (freely available) geographic data from different sources for the creation of innovative applications and services through the creation of Virtual Hubs". The ENERGIC OD Virtual Hubs aim to facilitate the use of geospatial Open Data by lowering and possibly removing the main barriers which hampers geo-information (GI) usage by end-users and application developers. Data and services heterogeneity is recognized as one of the major barriers to Open Data (re-)use. It imposes end-users and developers to spend a lot of effort in accessing different infrastructures and harmonizing datasets. Such heterogeneity cannot be completely removed through the adoption of standard specifications for service interfaces, metadata and data models, since different infrastructures adopt different standards to answer to specific challenges and to address specific use-cases. Thus

A Dynamic Calibration Method for Experimental and Analytical Hub Load Comparison

Science.gov (United States)

2017-03-01

computed at various pitch angles through changes in actuator length. The linear spring stiffness was estimated by using the internal volume of the...Vehicle Technology Directorate Mechanics Division (ATTN: RDRL-VTM) Aberdeen Proving Ground, MD 21005-5066 8. PERFORMING ORGANIZATION REPORT NUMBER...Finally, the balance loads are not only induced by the rotor hub loads, but also by loads transmitted via the pitch links to the swashplate. Thus

Review of research on AFPM hub motor

Directory of Open Access Journals (Sweden)

Jianguo DAI

2018-02-01

Full Text Available The industrialization of new energy vehicles is an important way to promote the sustainable development of automobile industry, and it is also the key measure to solve the problems of energy and environment. As an important type of new energy vehicles, electric vehicles will play an important role in the future competition in the automotive industry, especially in the field of electric vehicle driven by wheel. With the advantages of compact structure, high power density, low working noise and good heat dissipation performance, the AFPM motor has gradually become the preferred object of the hub driving device. Based on the statement of the technical development and research status about AFPM motor, this paper mainly analyzes the engineering application and technical problems of AFPM motor in hub drive, especially the matching of AFPM motor with other systems and the problem of heat dissipation at high load conditions, and looks forward to the key role in the future development of the automotive industry. This paper will play a certain reference and guiding role in the application of AFPM motor in the field of new energy vehicles.

A versatile framework for cooperative hub network development

NARCIS (Netherlands)

Cruijssen, F.C.A.M.; Borm, P.; Dullaert, W.; Hamers, H.

2010-01-01

This paper introduces a framework for cooperative hub network development. Building a joint physical hub for the transshipment of goods is expensive and, therefore, involves considerable risks for cooperating companies. In a practical setting, it is unlikely that an entire network will be built at

A versatile framework for cooperative hub network development

NARCIS (Netherlands)

Cruijssen, Frans; Borm, Peter; Dullaert, Wout; Hamers, Herbert

This paper introduces a framework for cooperative hub network development. Building a joint physical hub for the transshipment of goods is expensive and, therefore, involves considerable risks for cooperating companies. In a practical setting, it is unlikely that an entire network will be built at

Coffee Shops, Classrooms and Conversations: public engagement and outreach in a large interdisciplinary research Hub

Science.gov (United States)

Holden, Jennifer A.

2014-05-01

Public engagement and outreach activities are increasingly using specialist staff for co-ordination, training and support for researchers, they are also becoming expected for large investments. Here, the experience of public engagement and outreach a large, interdisciplinary Research Hub is described. dot.rural, based at the University of Aberdeen UK, is a £11.8 million Research Councils UK Rural Digital Economy Hub, funded as part of the RCUK Digital Economy Theme (2009-2015). Digital Economy research aims to realise the transformational impact of digital technologies on aspects of the environment, community life, cultural experiences, future society, and the economy. The dot.rural Hub involves 92 researchers from 12 different disciplines, including Geography, Hydrology and Ecology. Public Engagement and Outreach is embedded in the dot.rural Digital Economy Hub via an Outreach Officer. Alongside this position, public engagement and outreach activities are compulsory part of PhD student contracts. Public Engagement and Outreach activities at the dot.rural Hub involve individuals and groups in both formal and informal settings organised by dot.rural and other organisations. Activities in the realms of Education, Public Engagement, Traditional and Social Media are determined by a set of Underlying Principles designed for the Hub by the Outreach Officer. The underlying Engagement and Outreach principles match funding agency requirements and expectations alongside researcher demands and the user-led nature of Digital Economy Research. All activities include researchers alongside the Outreach Officer are research informed and embedded into specific projects that form the Hub. Successful public engagement activities have included participation in Café Scientifique series, workshops in primary and secondary schools, and online activities such as I'm a Scientist Get Me Out of Here. From how to engage 8 year olds with making hydrographs more understandable to members of

Virtual Campus Hub: A single sign-on system for cross-border collaboration

DEFF Research Database (Denmark)

Badger, Merete; Vercoulen, F.; Monaco, L.

2013-01-01

laboratory exercises, examination tools, courses, collaboration tools, and tools to support the incubation of new small or medium size enterprises (SMEs). All of the applications serve as use cases for the demonstration of how the technology behind Virtual Campus Hub works. They can be accessed via...... in connection with joint educational programs and courses. These experiences are gained through a series of virtual events where users from the partners are invited to test each other’s applications. So far, testing of remote laboratory exercises, examination tools and an online course in wind energy has shown......Four technical universities in Europe work together in the EU-funded project Virtual Campus Hub (FP7 RI-283746, www.virtualcampushub.eu) to lower the technical barriers for cross-border collaboration. Universities have many connections to the outside world (e.g. to other universities, to joint...

International Education Hubs: Collaboration for Competitiveness and Sustainability

Science.gov (United States)

Knight, Jane

2014-01-01

This chapter focuses on the development of education hubs, a recent phenomenon in international higher education. Three models of hubs are examined in relation to the forces, risks, and opportunities of globalization and how local and international collaborations are essential for both global competitiveness and sustainability.

Development of an improved low profile hub seal refurbishment tool

International Nuclear Information System (INIS)

Wagg, L.

1997-01-01

The hub seal area of a fuel channel feeder coupling can be exposed to oxygen in the atmosphere if protective measures are not taken during maintenance outages. Exposure to oxygen can lead to pitting of the hub seal area. Although this is a rare occurrence, the resulting possibility of the feeder coupling leakage led to the development of a feeder hub refurbishment tool. To reduce time and man-rem exposure during feeder hub seal refurbishment, an improved low profile hub seat refurbishing tool has been developed. The improved tool design will allow for quick and controlled removal of material, and the restoration of a roll-burnished finish equivalent to the original requirements. The new tool can be used in maintenance operations, with the end fitting present, as well as under retube-type circumstances, with the end fitting removed. (author)

Fostering reflective practice with mobile technologies

NARCIS (Netherlands)

Tabuenca, Bernardo; Verpoorten, Dominique; Ternier, Stefaan; Westera, Wim; Specht, Marcus

2012-01-01

Tabuenca, B., Verpoorten, D., Ternier, S., Westera, W., & Specht, M. (2012). Fostering reflective practice with mobile technologies. In A. Moore, V. Pammer, L. Pannese, M. Prilla, K. Rajagopal, W. Reinhardt, Th. D. Ullman, & Ch. Voigt (Eds.), Proceedings of the 2nd Workshop on Awareness and

The effect of spherical hub-nose position on pressure drop in an oscillating water column system for wave energy conversion

Energy Technology Data Exchange (ETDEWEB)

Taha, Z.; Ahmad, N.; Ghazilla, R.A.R.; Yap, H.J.; Ya, T.Y.T.; Passarella, R.; Hasanuddin, I.; Yunus, M. [Malaya Univ. (Malaysia). Centre for Product Design and Manufacturing; Sugiyono [Malaya Univ., (Malaysia). Centre for Product Design and Manufacturing; Gadjah Mada Univ. (Indonesia). Dept. of Mechanical and Industrial Engineering

2009-07-01

The use of renewable energy sources as an alternative to conventional fuels was discussed with particular reference to ocean wave energy and its potential to contribute to the energy requirements of coastal nations. Ocean wave energy has been harnessed and converted into electricity using processes and technologies that are environmentally sound. The oscillating water column (OWC) system is considered to be among the most promising technology for harnessing wave energy. This paper presented the results of a study that investigated the pressure drop in an OWC system and the effect of spherical hub-nose position in an annular duct. Computational fluid dynamics (CFD) analysis was used under steady flow conditions for several hub-nose positions to determine the characteristic of pressure drop. The study showed that the hub-nose position influenced the pressure drop in the OWC system. The highest value of the pressure drop in this study occurred when the hub-nose was at the position of 0.0 m relative to the end of the converging cone. The pressure drop decreased when the hub-nose position moved away from the end of converging cone. The lowest value occurred at the position of -0.5 m. It was concluded that despite the numerically small change in pressure drop, this phenomenon should be considered in the design process of the OWC system because of the operational condition of the system at low-pressure pneumatic power. The pressure drop actually reduces the amount of energy that will be converted by the air turbine. 9 refs., 2 tabs., 6 figs.

Electric wheel hub motor; Elektrischer Radnabenmotor

Energy Technology Data Exchange (ETDEWEB)

Groeninger, Michael; Kock, Alexander [IFAM Bremen (Germany); Horch, Felix [IFAM Bremen (Germany). Komponentenentwicklung; Pleteit, Hermann [IFAM Bremen (Germany). Abt. Giessereitechnologie und Komponentenentwicklung

2012-02-15

The bundled competences of the participating Fraunhofer Institutes have made it possible to develop a wheel hub motor that has essentially overcome currently existing technical hurdles, enabling its use in a vehicle. In addition to direct technical challenges such as sealing against external influences, high bearing stiffness requirements, necessary high torque densities and simple integration in the chassis, the safety aspects required by modern vehicles were also taken into account. A drive system that guarantees safe driving states, even in the case of malfunction, was developed through the combination of recuperative braking with a classic mechanical braking system and redundant motor design. (orig.)

E-hubs: the new B2B (business-to-business) marketplaces.

Science.gov (United States)

Kaplan, S; Sawhney, M

2000-01-01

Electronic hubs--Internet-based intermediaries that host electronic marketplaces and mediate transactions among businesses--are generating a lot of interest. Companies like Ariba, Chemdex, and Commerce One have already attained breathtaking stock market capitalizations. Venture capitalists are pouring money into more business-to-business start-ups. Even industrial stalwarts like GM and Ford are making plans to set up their own Web markets. As new entrants with new business models pour into the business-to-business space, it's increasingly difficult to make sense of the landscape. This article provides a blueprint of the e-hub arena. The authors start by looking at the two dimensions of purchasing: what businesses buy--manufacturing inputs or operating inputs--and how they buy--through systematic sourcing or spot sourcing. They classify B2B e-hubs into four categories: MRO hubs, yield managers, exchanges, and catalog hubs, and they discuss each type in detail. Drilling deeper into this B2B matrix, the authors look at how e-hubs create value--through aggregation and matching--and explain when each mechanism works best. They also examine the biases of e-hubs. Although many e-hubs are neutral--they're operated by independent third parties--some favor the buyers or sellers. The authors explain the differences and discuss the pros and cons of each position. The B2B marketplace is changing rapidly. This framework helps buyers, sellers, and market makers navigate the landscape by explaining what the different hubs do and how they add the most value.

Extraversion modulates functional connectivity hubs of resting-state brain networks.

Science.gov (United States)

Pang, Yajing; Cui, Qian; Duan, Xujun; Chen, Heng; Zeng, Ling; Zhang, Zhiqiang; Lu, Guangming; Chen, Huafu

2017-09-01

Personality dimension extraversion describes individual differences in social behaviour and socio-emotional functioning. The intrinsic functional connectivity patterns of the brain are reportedly associated with extraversion. However, whether or not extraversion is associated with functional hubs warrants clarification. Functional hubs are involved in the rapid integration of neural processing, and their dysfunction contributes to the development of neuropsychiatric disorders. In this study, we employed the functional connectivity density (FCD) method for the first time to distinguish the energy-efficient hubs associated with extraversion. The resting-state functional magnetic resonance imaging data of 71 healthy subjects were used in the analysis. Short-range FCD was positively correlated with extraversion in the left cuneus, revealing a link between the local functional activity of this region and extraversion in risk-taking. Long-range FCD was negatively correlated with extraversion in the right superior frontal gyrus and the inferior frontal gyrus. Seed-based resting-state functional connectivity (RSFC) analyses revealed that a decreased long-range FCD in individuals with high extraversion scores showed a low long-range functional connectivity pattern between the medial and dorsolateral prefrontal cortex, middle temporal gyrus, and anterior cingulate cortex. This result suggests that decreased RSFC patterns are responsible for self-esteem, self-evaluation, and inhibitory behaviour system that account for the modulation and shaping of extraversion. Overall, our results emphasize specific brain hubs, and reveal long-range functional connections in relation to extraversion, thereby providing a neurobiological basis of extraversion. © 2015 The British Psychological Society.

Sci-Hub provides access to nearly all scholarly literature.

Science.gov (United States)

Himmelstein, Daniel S; Romero, Ariel Rodriguez; Levernier, Jacob G; Munro, Thomas Anthony; McLaughlin, Stephen Reid; Greshake Tzovaras, Bastian; Greene, Casey S

2018-03-01

The website Sci-Hub enables users to download PDF versions of scholarly articles, including many articles that are paywalled at their journal's site. Sci-Hub has grown rapidly since its creation in 2011, but the extent of its coverage has been unclear. Here we report that, as of March 2017, Sci-Hub's database contains 68.9% of the 81.6 million scholarly articles registered with Crossref and 85.1% of articles published in toll access journals. We find that coverage varies by discipline and publisher, and that Sci-Hub preferentially covers popular, paywalled content. For toll access articles, we find that Sci-Hub provides greater coverage than the University of Pennsylvania, a major research university in the United States. Green open access to toll access articles via licit services, on the other hand, remains quite limited. Our interactive browser at https://greenelab.github.io/scihub allows users to explore these findings in more detail. For the first time, nearly all scholarly literature is available gratis to anyone with an Internet connection, suggesting the toll access business model may become unsustainable. © 2018, Himmelstein et al.

Liner Shipping Hub Network Design in a Competitive Environment

DEFF Research Database (Denmark)

Gelareh, Shahin; Nickel, Stefan; Pisinger, David

A new mixed integer programming formulation is proposed for hub-and-spoke network design in a competitive environment. It addresses competition between a newcomer liner service provider and an alliance, both operating on hub-and-spoke networks. The newcomer company maximizes its market share...... — proportional to service time and transportation cost —by locating a predefined number of hubs at candidate ports and designing its network. While general-purpose solvers do not solve instances of even small size, an accelerated lagrangian method coupled with a primal heuristic obtains very good bounds. Our...

Multi-Item Distribution Policies with Supply Hub and Lateral Transshipment

OpenAIRE

Zhong Jin-Hong; Jiang Rui-Xuan; Zheng Gui

2015-01-01

Supply Hub is defined as the horizontal coordination among the suppliers while lateral transshipment is a horizontal coordination policy among the retailers. By considering the Supply Hub and lateral transshipment simultaneously, ones can reduce the total cost of the supply chain system and improve the response to customer requirement and the customers’ satisfaction. We investigate the distribution policies for the supply chain which consists of multisuppliers, single Supply Hub, and multidis...

Physics and technology development of multilayer EUV reflective optics

NARCIS (Netherlands)

Louis, Eric

2012-01-01

This thesis describes the development of molybdenum/silicon based multilayer reflective elements for the Extreme UV wavelength range, as motivated by their application in photolithography for semiconductor manufacturing. The thesis reflects the basic thin film physics, technological developments,

Evaluating a European knowledge hub on climate change in agriculture: Are we building a better connected community?

Science.gov (United States)

Saetnan, Eli Rudinow; Kipling, Richard Philip

In order to maintain food security and sustainability of production under climate change, interdisciplinary and international collaboration in research is essential. In the EU, knowledge hubs are important funding instruments for the development of an interconnected European Research Area. Here, network analysis was used to assess whether the pilot knowledge hub MACSUR has affected interdisciplinary collaboration, using co-authorship of peer reviewed articles as a measure of collaboration. The broad community of all authors identified as active in the field of agriculture and climate change was increasingly well connected over the period studied. Between knowledge hub members, changes in network parameters suggest an increase in collaborative interaction beyond that expected due to network growth, and greater than that found in the broader community. Given that interdisciplinary networks often take several years to have an impact on research outputs, these changes within the relatively new MACSUR community provide evidence that the knowledge hub structure has been effective in stimulating collaboration. However, analysis showed that knowledge hub partners were initially well-connected, suggesting that the initiative may have gathered together researchers with particular resources or inclinations towards collaborative working. Long term, consistent funding and ongoing reflection to improve networking structures may be necessary to sustain the early positive signs from MACSUR, to extend its success to a wider community of researchers, or to repeat it in less connected fields of science. Tackling complex challenges such as climate change will require research structures that can effectively support and utilise the diversity of talents beyond the already well-connected core of scientists at major research institutes. But network research shows that this core, well-connected group are vital brokers in achieving wider integration.

FROM PRE-OIL SETTLEMENT TO POST-OIL HUB: The Urban Transformation of Doha

Directory of Open Access Journals (Sweden)

Florian Wiedmann

2013-07-01

Full Text Available Since oil production commenced in the middle of the 20th century Qatar's capital Doha witnessed a rapid urbanisation period. Today, new development strategies, which have been implemented to diversify Qatar's economy, have led to a new urban transformation process with the vision to establish Doha as hub within global networks. Economic transformation processes in Qatar have always caused new structures within its society, which in turn affected urban developments. After decades of urbanisation based on the export of oil, the introduction of a hub vision at the end of the 1990s marked a new process that has been rethinking urbanism in Qatar. Although current developments have attracted worldwide attention, there has been rather little scientific reflection as to how current urbanism in the Gulf should be understood in relation to its past and projected future. Therefore, this paper seeks to investigate the various factors impacting Doha's urban environment during economic transformation processes. Each economc transformation has had a large impact  on the structure of the city’s society as well as its built environment. The curren transformation process can still be considered at its beginning. In order to understand the impact of contemporary economic diversification strategies, the city’s past urbanisation stages and their spatial development factors had to be analysed. All in all four distinct phases of urbanism can be distinguished in the case of Doha: The pre-oil settlement, the modernisation period, the oil city and the globalised hub.

Liner shipping hub network design in a competitive environment

DEFF Research Database (Denmark)

Gelareh, Shahin; Nickel, Stefan; Pisinger, David

2010-01-01

A mixed integer programming formulation is proposed for hub-and-spoke network design in a competitive environment. It addresses the competition between a newcomer liner service provider and an existing dominating operator, both operating on hub-and-spoke networks. The newcomer company maximizes i...

Flow Merging and Hub Route Optimization in Collaborative Transportation

Directory of Open Access Journals (Sweden)

Kerui Weng

2014-01-01

Full Text Available This paper studies the optimal hub routing problem of merged tasks in collaborative transportation. This problem allows all carriers’ transportation tasks to reach the destinations optionally passing through 0, 1, or 2 hubs within limited distance, while a cost discount on arcs in the hub route could be acquired after paying fixed charges. The problem arises in the application of logistics, postal services, airline transportation, and so forth. We formulate the problem as a mixed-integer programming model, and provide two heuristic approaches, respectively, based on Lagrangian relaxation and Benders decomposition. Computational experiments show that the algorithms work well.

Predicting the binding patterns of hub proteins: a study using yeast protein interaction networks.

Directory of Open Access Journals (Sweden)

Carson M Andorf

Full Text Available Protein-protein interactions are critical to elucidating the role played by individual proteins in important biological pathways. Of particular interest are hub proteins that can interact with large numbers of partners and often play essential roles in cellular control. Depending on the number of binding sites, protein hubs can be classified at a structural level as singlish-interface hubs (SIH with one or two binding sites, or multiple-interface hubs (MIH with three or more binding sites. In terms of kinetics, hub proteins can be classified as date hubs (i.e., interact with different partners at different times or locations or party hubs (i.e., simultaneously interact with multiple partners.Our approach works in 3 phases: Phase I classifies if a protein is likely to bind with another protein. Phase II determines if a protein-binding (PB protein is a hub. Phase III classifies PB proteins as singlish-interface versus multiple-interface hubs and date versus party hubs. At each stage, we use sequence-based predictors trained using several standard machine learning techniques.Our method is able to predict whether a protein is a protein-binding protein with an accuracy of 94% and a correlation coefficient of 0.87; identify hubs from non-hubs with 100% accuracy for 30% of the data; distinguish date hubs/party hubs with 69% accuracy and area under ROC curve of 0.68; and SIH/MIH with 89% accuracy and area under ROC curve of 0.84. Because our method is based on sequence information alone, it can be used even in settings where reliable protein-protein interaction data or structures of protein-protein complexes are unavailable to obtain useful insights into the functional and evolutionary characteristics of proteins and their interactions.We provide a web server for our three-phase approach: http://hybsvm.gdcb.iastate.edu.

Establishment of a Hub for the Light Water Reactor Sustainability Online Monitoring Community

International Nuclear Information System (INIS)

Lybeck, Nancy J.; Tawfik, Magdy S.; Pham, Binh T.

2011-01-01

Implementation of online monitoring and prognostics in existing U.S. nuclear power plants will involve coordinating the efforts of national laboratories, utilities, universities, and private companies. Internet-based collaborative work environments provide necessary communication tools to facilitate interaction between geographically diverse participants. Available technologies were considered, and a collaborative workspace was established at INL as a hub for the light water reactor sustainability online monitoring community.

Gravity drives the evolution of infrared dark hubs: JVLA observations of SDC13

Science.gov (United States)

Williams, G. M.; Peretto, N.; Avison, A.; Duarte-Cabral, A.; Fuller, G. A.

2018-05-01

Context. Converging networks of interstellar filaments, that is hubs, have been recently linked to the formation of stellar clusters and massive stars. Understanding the relationship between the evolution of these systems and the formation of cores and stars inside them is at the heart of current star formation research. Aims: The goal is to study the kinematic and density structure of the SDC13 prototypical hub at high angular resolution to determine what drives its evolution and fragmentation. Methods: We have mapped SDC13, a 1000 M⊙ infrared dark hub, in NH3(1,1) and NH3(2,2) emission lines, with both the Jansky Very Large Array and Green Bank Telescope. The high angular resolution achieved in the combined dataset allowed us to probe scales down to 0.07 pc. After fitting the ammonia lines, we computed the integrated intensities, centroid velocities and line widths, along with gas temperatures and H2 column densities. Results: The mass-per-unit-lengths of all four hub filaments are thermally super-critical, consistent with the presence of tens of gravitationally bound cores identified along them. These cores exhibit a regular separation of 0.37 ± 0.16 pc suggesting gravitational instabilities running along these super-critical filaments are responsible for their fragmentation. The observed local increase of the dense gas velocity dispersion towards starless cores is believed to be a consequence of such fragmentation process. Using energy conservation arguments, we estimate that the gravitational to kinetic energy conversion efficiency in the SDC13 cores is 35%. We see velocity gradient peaks towards 63% of cores as expected during the early stages of filament fragmentation. Another clear observational signature is the presence of the most massive cores at the filaments' junction, where the velocity dispersion is largest. We interpret this as the result of the hub morphology generating the largest acceleration gradients near the hub centre. Conclusions: We

Climate programs update: USDA Southwest Regional Climate Hub update

Science.gov (United States)

PROGRAM OVERVIEW: The overarching goal of the USDA SW Climate Hub is to assist farmers, ranchers and foresters in addressing the effects of climate change including prolonged drought, increased insect outbreaks and severe wildfires. In the first year of operations, the SW Climate Hub (est. Februa...

Rigid-flexible coupling dynamics of three-dimensional hub-beams system

International Nuclear Information System (INIS)

Liu Jinyang; Lu Hao

2007-01-01

In the previous research of the coupling dynamics of a hub-beam system, coupling between the rotational motion of hub and the torsion deformation of beam is not taken into account since the system undergoes planar motion. Due to the small longitudinal deformation, coupling between the rotational motion of hub and the longitudinal deformation of beam is also neglected. In this paper, rigid-flexible coupling dynamics is extended to a hub-beams system with three-dimensional large overall motion. Not only coupling between the large overall motion and the bending deformation, but also coupling between the large overall motion and the torsional deformation are taken into account. In case of temperature increase, the longitudinal deformation caused by the thermal expansion is significant, such that coupling between the large overall motion and the longitudinal deformation is also investigated. Combining the characteristics of the hybrid coordinate formulation and the absolute nodal coordinate formulation, the system generalized coordinates include the relative nodal displacement and the slope of each beam element with respect to the body-fixed frame of the hub, and the variables related to the spatial large overall motion of the hub and beams. Based on precise strain-displacement relation, the geometric stiffening effect is taken into account, and the rigid-flexible coupling dynamic equations are derived using velocity variational principle. Finite element method is employed for discretization. Simulation of a hub-beams system is used to show the coupling effect between the large overall motion and the torsional deformation as well as the longitudinal deformation. Furthermore, conservation of energy in case of free motion is shown to verify the formulation

Fixed-axis electric sail deployment dynamics analysis using hub-mounted momentum control

Science.gov (United States)

Fulton, JoAnna; Schaub, Hanspeter

2018-03-01

The deployment dynamics of a spin stabilized electric sail (E-sail) with a hub-mounted control actuator are investigated. Both radial and tangential deployment mechanisms are considered to take the electric sail from a post-launch stowed configuration to a fully deployed configuration. The tangential configuration assumes the multi-kilometer tethers are wound up on the exterior of the spacecraft hub, similar to yo-yo despinner configurations. The deployment speed is controlled through the hub rate. The radial deployment configuration assumes each tether is on its own spool. Here both the hub and spool rate are control variables. The sensitivity of the deployment behavior to E-sail length, maximum rate and tension parameters is investigated. A constant hub rate deployment is compared to a time varying hub rate that maintains a constant tether tension condition. The deployment time can be reduced by a factor of 2 or more by using a tension controlled deployment configuration.

Nonlinear analysis of the GFRP material wheel hub

Directory of Open Access Journals (Sweden)

Dong Yun-Feng

2015-01-01

Full Text Available In this paper, the current bicycle wheel was replaced by the ones which composed by the wheel hub with Glassfiber Reinforced Plastic (alkali free thin-walled cylinder material, hereinafter referred to as GFRP material and the protective components made up of rubber outer pneumatic pad. With the help of the basic theory of elastic-plastic mechanics, the finite element “Nonlinear buckling” analysis of the wheel was carried out. The results show that the maximum elastic deformation of the wheel hub and the critical value of buckling failure load were restricted by the elasticity under the condition of external loads. Considering with the tensile strength and elastic modulus of the GFRP value of the material, it is demonstrated that the material is feasible to be used for wheel hub.

Analysis of 2D Torus and Hub Topologies of 100Mb/s Ethernet for the Whitney Commodity Computing Testbed

Science.gov (United States)

Pedretti, Kevin T.; Fineberg, Samuel A.; Kutler, Paul (Technical Monitor)

1997-01-01

A variety of different network technologies and topologies are currently being evaluated as part of the Whitney Project. This paper reports on the implementation and performance of a Fast Ethernet network configured in a 4x4 2D torus topology in a testbed cluster of 'commodity' Pentium Pro PCs. Several benchmarks were used for performance evaluation: an MPI point to point message passing benchmark, an MPI collective communication benchmark, and the NAS Parallel Benchmarks version 2.2 (NPB2). Our results show that for point to point communication on an unloaded network, the hub and 1 hop routes on the torus have about the same bandwidth and latency. However, the bandwidth decreases and the latency increases on the torus for each additional route hop. Collective communication benchmarks show that the torus provides roughly four times more aggregate bandwidth and eight times faster MPI barrier synchronizations than a hub based network for 16 processor systems. Finally, the SOAPBOX benchmarks, which simulate real-world CFD applications, generally demonstrated substantially better performance on the torus than on the hub. In the few cases the hub was faster, the difference was negligible. In total, our experimental results lead to the conclusion that for Fast Ethernet networks, the torus topology has better performance and scales better than a hub based network.

Managing effective and efficient hub operations : a study of ground time management

NARCIS (Netherlands)

Yunita, Theresia

2009-01-01

This Logistics Design Project was carried out at KLM Aircraft Services (AS), from February 2008 - April 2009. The project focuses on ideal description of KLM operational controls for daily executions at the hub and within the AS processes. The daily execution at the hub is managed by the Hub Control

SUN HUB – ENERGY HUB FOR OUTDOOR TABLES

DEFF Research Database (Denmark)

Poulsen, Peter Behrensdorff; Benatto, Gisele Alves dos Reis; Riedel, Nicholas

2017-01-01

connections, providing opportunity to stream music via Bluetooth and play it from a handheld device to the table and lastly to provide LED lighting on the table during the dark hours. 3 prototypes of the system was built and tested at the Roskilde Festival 2017. Electrical logger units were built into the 3...... on festivals where people camps for several days it can be hard to have your portable units charged. In this this work we report a solar powered hub, as an add-on to a table in the urban environment for charging mobile phones and tablets and other handheld devices through USBs, charging laptops through AC...

Development of a Long-Life-Cycle, Highly Water-Resistant Solar Reflective Retrofit Roof Coating

Energy Technology Data Exchange (ETDEWEB)

Polyzos, Georgios [ORNL; Hunter, Scott Robert [ORNL; Sharma, Jaswinder K [ORNL; Cheng, Mengdawn [ORNL; Chen, Sharon S [Lawrence Berkeley National Laboratory (LBNL); Demarest, Victoria [Dow Chemical Company; Fabiny, William [Dow Chemical Company; Destaillats, Hugo [Lawrence Berkeley National Laboratory (LBNL); Levinson, Ronnen [Lawrence Berkeley National Laboratory (LBNL)

2016-03-04

Highly water-resistant and solar-reflective coatings for low-slope roofs are potentially among the most economical retrofit approaches to thermal management of the building envelope. Therefore, they represent a key building technology research program within the Department of Energy. Research efforts in industry and the Department of Energy are currently under way to increase long-term solar reflectance on a number of fronts. These include new polymer coatings technologies to provide longer-lasting solar reflectivity and improved test methodologies to predict long-term soiling and microbial performance. The focus on long-term improvements in soiling and microbial resistance for maximum reflectance does not address the single most important factor impacting the long-term sustainability of low-slope roof coatings: excellent water resistance. The hydrophobic character of asphaltic roof products makes them uniquely suitable for water resistance, but their low albedo and poor exterior durability are disadvantages. A reflective coating that maintains very high water resistance with increased long-term resistance to soiling and microbial activity would provide additional energy savings and extend roof service life.

Microfluidic hubs, systems, and methods for interface fluidic modules

Science.gov (United States)

Bartsch, Michael S; Claudnic, Mark R; Kim, Hanyoup; Patel, Kamlesh D; Renzi, Ronald F; Van De Vreugde, James L

2015-01-27

Embodiments of microfluidic hubs and systems are described that may be used to connect fluidic modules. A space between surfaces may be set by fixtures described herein. In some examples a fixture may set substrate-to-substrate spacing based on a distance between registration surfaces on which the respective substrates rest. Fluidic interfaces are described, including examples where fluid conduits (e.g. capillaries) extend into the fixture to the space between surfaces. Droplets of fluid may be introduced to and/or removed from microfluidic hubs described herein, and fluid actuators may be used to move droplets within the space between surfaces. Continuous flow modules may be integrated with the hubs in some examples.

North West Surrey's locality hubs - delivering integrated care

OpenAIRE

Compton, Lisa; Wilkinson, Peter; Lawn, Liz

2017-01-01

Introduction: North West Surrey CCG (NWSCCG) is establishing Locality Hubs – physical buildings offering a fully integrated GP-led, multi-disciplinary ‘one-stop-shop’ services in the community for a defined cohort of frail elderly patients with multiple core morbidities. Hubs will ultimately deliver proactive and reactive care, available 24 hours a day, 365 days a year.The key drivers are;Ageing population, people living longer & more people living with chronic conditionsCost & demand...

Methods for measuring the spectral reflectivity of advanced materials at high temperature

International Nuclear Information System (INIS)

Salikhov, T.P.; Kan, V.V.

1993-01-01

For investigation in the domain of advanced materials as well as for new technologies there is an urgent need for knowledge of the spectral reflectivity of the materials specially at high temperatures. However the methods available are mostly intended for measuring the model materials with specular or diffuse reflection surface. This is not quite correct since advanced materials have mixed specular diffuse reflection surfaces. New methods for reflectivity measurements of materials in the visible, near and middle infrared range at high temperature, regardless of surface texture, have been developed. The advantages of the methods proposed are as flows: (a) the facility of performing the reflectivity measurements for materials with mixed specular diffuse reflectance; (b) wide spectral range 0,38-8 micro m; (c) wide temperature range 300-3000 K; (d) high accuracy and rapid measurements. The methods are based on the following principals (i) Diffuse irradiation of the sample surface and the use of Helkholtz reciprocity principle to determine the directional hemispherical reflectivity ii) Pulse polychromatic probing of the sample by additional light source. The first principle excludes the influence of the angular reflection distribution of sample surface on data obtained. The second principle gives the possibility of simultaneous measurements of the reflectivity. The second principle gives the possibility of simultaneous measurements of the reflectivity in wide spectral range. On the basis of these principles for high temperature reflectometers have been developed and discussed here. (author)

Electrical hubs: An effective way to integrate non-dispatchable renewable energy sources with minimum impact to the grid

International Nuclear Information System (INIS)

Perera, A.T.D.; Nik, Vahid M.; Mauree, Dasaraden; Scartezzini, Jean-Louis

2017-01-01

Highlights: • A novel method introduced to optimize Electrical Hubs. • Novel dispatch based on fuzzy control and finite state machines. • Evaluating sensitivity of three performance indices for system autonomy. • Multi objective optimization considering system autonomy-cost. • Electrical Hubs can cover above 60% of the demand using wind and Solar PV. - Abstract: A paradigm change in energy system design tools, energy market, and energy policy is required to attain the target levels in renewable energy integration and in minimizing pollutant emissions in power generation. Integrating non-dispatchable renewable energy sources such as solar and wind energy is vital in this context. Distributed generation has been identified as a promising method to integrate Solar PV (SPV) and wind energy into grid in recent literature. Distributed generation using grid-tied electrical hubs, which consist of Internal Combustion Generator (ICG), non-dispatchable energy sources (i.e., wind turbines and SPV panels) and energy storage for providing the electricity demand in Sri Lanka is considered in this study. A novel dispatch strategy is introduced to address the limitations in the existing methods in optimizing grid-integrated electrical hubs considering real time pricing of the electricity grid and curtailments in grid integration. Multi-objective optimization is conducted for the system design considering grid integration level and Levelized Energy Cost (LEC) as objective functions to evaluate the potential of electrical hubs to integrate SPV and wind energy. The sensitivity of grid curtailments, energy market, price of wind turbines and SPV panels on Pareto front is evaluated subsequently. Results from the Pareto analysis demonstrate the potential of electrical hubs to cover more than 60% of the annual electricity demand from SPV and wind energy considering stringent grid curtailments. Such a share from SPV and wind energy is quite significant when compared to direct grid

DigitalHub: A Repository Focused on the Future.

Science.gov (United States)

Ilik, Violeta; Hebal, Piotr; Olson, Anton; Wishnetsky, Susan; Pastva, Joelen; Kubilius, Ramune; Shank, Jonathan; Gutzman, Karen; Chung, Margarita; Holmes, Kristi

2018-01-01

The DigitalHub scholarly repository was developed and launched at the Galter Health Sciences Library for the Feinberg School of Medicine and the greater Northwestern Medicine community. The repository was designed to allow scholars the ability to create, share, and preserve a range of citable digital outputs. This article traces the evolution of DigitalHub's development and engagement activities, highlighting project challenges, innovations, success stories, and the team-based approach that was employed to successfully achieve project goals.

Incremental Optimization of Hub and Spoke Network for the Spokes’ Numbers and Flow

Directory of Open Access Journals (Sweden)

Yanfeng Wang

2015-01-01

Full Text Available Hub and spoke network problem is solved as part of a strategic decision making process which may have a profound effect on the future of enterprises. In view of the existing network structure, as time goes on, the number of spokes and the flow change because of different sources of uncertainty. Hence, the incremental optimization of hub and spoke network problem is considered in this paper, and the policy makers should adopt a series of strategies to cope with the change, such as setting up new hubs, adjusting the capacity level of original hubs, or closing some original hubs. The objective is to minimize the total cost, which includes the setup costs for the new hubs, the closure costs, and the adjustment costs for the original hubs as well as the flow routing costs. Two mixed-integer linear programming formulations are proposed and analyzed for this problem. China Deppon Logistics as an example is performed to present computational analysis, and we analyze the changes in the solutions driven by the number of spokes and the flow. The tests also allow an analysis to consider the effect of variation in parameters on network.

Dimensional consistency achieved in high-performance synchronizing hubs

International Nuclear Information System (INIS)

Garcia, P.; Campos, M.; Torralba, M.

2013-01-01

The tolerances of parts produced for the automotive industry are so tight that any small process variation may mean that the product does not fulfill them. As dimensional tolerances decrease, the material properties of parts are expected to be improved. Depending on the dimensional and material requirements of a part, different production routes are available to find robust processes, minimizing cost and maximizing process capability. Dimensional tolerances have been reduced in recent years, and as a result, the double pressing-double sintering production via ( 2 P2S ) has again become an accurate way to meet these increasingly narrow tolerances. In this paper, it is shown that the process parameters of the first sintering have great influence on the following production steps and the dimensions of the final parts. The roles of factors other than density and the second sintering process in defining the final dimensions of product are probed. All trials were done in a production line that produces synchronizer hubs for manual transmissions, allowing the maintenance of stable conditions and control of those parameters that are relevant for the product and process. (Author) 21 refs.

Zoning Districts - Volusia County HUB Zones

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Historically Underutilized Business (HUB) Zones in Volusia County. Go to http://www.sba.gov/hubzone or contact the Department of Economic Development (386) 248-8048...

City Hub : a cloud based IoT platform for Smart Cities

OpenAIRE

Lea, Rodger; Blackstock, Michael

2014-01-01

Cloud based Smart City hubs are an attractive approach to addressing some of the complex issues faced when deploying PaaS infrastructure for Smart Cities. In this paper we introduce the general notion of IoT hubs and then discusses our work to generalize our IoT hub as a Smart City PaaS. Two key issues are identified, support for hybrid public/private cloud and interoperability. We briefly describe our approach to these issues and discuss our experiences deploying two cloud-based Smart City h...

Idea Hubs as Nexus of Collective Creativity in Digital Innovation

DEFF Research Database (Denmark)

Ciriello, Raffaele; Richter, Alexander

2015-01-01

Digital innovation radically transforms the nature of corporate innovation practices, implying a growing need for deeper understanding its origins and outcomes. In this paper, we conceptualize the focal points of social networking in digital innovation as idea hubs. We focus our analysis...... on instances of idea hubs in two multinational European software companies, where we conducted a case study over a two-year period, and collected data in form of interviews, digital documents, and participant observations. In doing so, we identify a set of social networking practices in which idea hubs serve...... of digital artifacts individuals can choose from, offline interaction still plays a major role in facilitating digital innovation....

Why primary care practices should become digital health information hubs for their patients.

Science.gov (United States)

Baird, Aaron; Nowak, Samantha

2014-11-25

Two interesting health care trends are currently occurring: 1) patient-facing technologies, such as personal health records, patient portals, and mobile health apps, are being adopted at rapid rates, and 2) primary care, which includes family practice, is being promoted as essential to reducing health care costs and improving health care outcomes. While these trends are notable and commendable, both remain subject to significant fragmentation and incentive misalignments, which has resulted in significant data coordination and value generation challenges. In particular, patient-facing technologies designed to increase care coordination, often fall prey to the very digital fragmentation issues they are supposed to overcome. Additionally, primary care providers are treating patients that may have considerable health information histories, but generating a single view of such multi-source data is nearly impossible. We contribute to this debate by proposing that primary care practices become digital health information hubs for their patients. Such hubs would offer health data coordination in a medically professional setting with the benefits of expert, trustworthy advice coupled with active patient engagement. We acknowledge challenges including: costs, information quality and provenance, willingness-to-share information and records, willingness-to-use (by both providers and patients), primary care scope creep, and determinations of technical and process effectiveness. Even with such potential challenges, we strongly believe that more debate is needed on this topic prior to full implementation of various health information technology incentives and reform programs currently being designed and enacted throughout the world. Ultimately, if we do not provide a meaningful way for the full spectrum of health information to be used by both providers and patients, especially early in the health care continuum, effectively improving health outcomes may remain elusive. We view

Connectome hubs at resting state in children and adolescents: Reproducibility and psychopathological correlation

Directory of Open Access Journals (Sweden)

João Ricardo Sato

2016-08-01

Full Text Available Functional brain hubs are key integrative regions in brain networks. Recently, brain hubs identified through resting-state fMRI have emerged as interesting targets to increase understanding of the relationships between large-scale functional networks and psychopathology. However, few studies have directly addressed the replicability and consistency of the hub regions identified and their association with symptoms. Here, we used the eigenvector centrality (EVC measure obtained from graph analysis of two large, independent population-based samples of children and adolescents (7–15 years old; total N = 652; 341 subjects for site 1 and 311 for site 2 to evaluate the replicability of hub identification. Subsequently, we tested the association between replicable hub regions and psychiatric symptoms. We identified a set of hubs consisting of the anterior medial prefrontal cortex and inferior parietal lobule/intraparietal sulcus (IPL/IPS. Moreover, lower EVC values in the right IPS were associated with psychiatric symptoms in both samples. Thus, low centrality of the IPS was a replicable sign of potential vulnerability to mental disorders in children. The identification of critical and replicable hubs in functional cortical networks in children and adolescents can foster understanding of the mechanisms underlying mental disorders.

Perceptions of Quality Life in Hamilton's Neighbourhood Hubs: A Qualitative Analysis

Science.gov (United States)

Eby, Jeanette; Kitchen, Peter; Williams, Allison

2012-01-01

This paper examines perceptions of quality of life in Hamilton, Ontario, Canada from the perspective of residents and key community stakeholders. A series of eight focus groups were conducted. Six sessions were held with residents of neighbourhood "hubs", areas characterized by high levels of poverty. The following themes were…

Experimental Investigation of Diffuser Hub Injection to Improve Centrifugal Compressor Stability

Science.gov (United States)

Skoch, Gary J.

2004-01-01

Results from a series of experiments to investigate whether centrifugal compressor stability could be improved by injecting air through the diffuser hub surface are reported. The research was conducted in a 4:1 pressure ratio centrifugal compressor configured with a vane-island diffuser. Injector nozzles were located just upstream of the leading edge of the diffuser vanes. Nozzle orientations were set to produce injected streams angled at 8, 0 and +8 degrees relative to the vane mean camber line. Several injection flow rates were tested using both an external air supply and recirculation from the diffuser exit. Compressor flow range did not improve at any injection flow rate that was tested. Compressor flow range did improve slightly at zero injection due to the flow resistance created by injector openings on the hub surface. Leading edge loading and semi-vaneless space diffusion showed trends similar to those reported earlier from shroud surface experiments that did improve compressor flow range. Opposite trends are seen for hub injection cases where compressor flow range decreased. The hub injection data further explain the range improvement provided by shroud-side injection and suggest that different hub-side techniques may produce range improvement in centrifugal compressors.

A Hub Matrix Theory and Applications to Wireless Communications

Directory of Open Access Journals (Sweden)

Kung HT

2007-01-01

Full Text Available This paper considers communications and network systems whose properties are characterized by the gaps of the leading eigenvalues of for a matrix . It is shown that a sufficient and necessary condition for a large eigen-gap is that is a "hub" matrix in the sense that it has dominant columns. Some applications of this hub theory in multiple-input and multiple-output (MIMO wireless systems are presented.

MyGeoHub: A Collaborative Geospatial Research and Education Platform

Science.gov (United States)

Kalyanam, R.; Zhao, L.; Biehl, L. L.; Song, C. X.; Merwade, V.; Villoria, N.

2017-12-01

Scientific research is increasingly collaborative and globally distributed; research groups now rely on web-based scientific tools and data management systems to simplify their day-to-day collaborative workflows. However, such tools often lack seamless interfaces, requiring researchers to contend with manual data transfers, annotation and sharing. MyGeoHub is a web platform that supports out-of-the-box, seamless workflows involving data ingestion, metadata extraction, analysis, sharing and publication. MyGeoHub is built on the HUBzero cyberinfrastructure platform and adds general-purpose software building blocks (GABBs), for geospatial data management, visualization and analysis. A data management building block iData, processes geospatial files, extracting metadata for keyword and map-based search while enabling quick previews. iData is pervasive, allowing access through a web interface, scientific tools on MyGeoHub or even mobile field devices via a data service API. GABBs includes a Python map library as well as map widgets that in a few lines of code, generate complete geospatial visualization web interfaces for scientific tools. GABBs also includes powerful tools that can be used with no programming effort. The GeoBuilder tool provides an intuitive wizard for importing multi-variable, geo-located time series data (typical of sensor readings, GPS trackers) to build visualizations supporting data filtering and plotting. MyGeoHub has been used in tutorials at scientific conferences and educational activities for K-12 students. MyGeoHub is also constantly evolving; the recent addition of Jupyter and R Shiny notebook environments enable reproducible, richly interactive geospatial analyses and applications ranging from simple pre-processing to published tools. MyGeoHub is not a monolithic geospatial science gateway, instead it supports diverse needs ranging from just a feature-rich data management system, to complex scientific tools and workflows.

Soft Power and Cultural Diplomacy: Emerging Education Hubs in Asia

Science.gov (United States)

Lee, Jack T.

2015-01-01

Several education hubs have emerged in Asia and the Middle East in recent years with a specific focus on cross-border higher education. Through considerable efforts in policy planning and generous funding, these hubs aim to transform a country or city into an eminent destination for education, research, and training. The inherent design of these…

Analysis of Sci-Hub downloads of computer science papers

Directory of Open Access Journals (Sweden)

Andročec Darko

2017-07-01

Full Text Available The scientific knowledge is disseminated by research papers. Most of the research literature is copyrighted by publishers and avail- able only through paywalls. Recently, some websites offer most of the recent content for free. One of them is the controversial website Sci-Hub that enables access to more than 47 million pirated research papers. In April 2016, Science Magazine published an article on Sci-Hub activity over the period of six months and publicly released the Sci-Hub’s server log data. The mentioned paper aggregates the view that relies on all downloads and for all fields of study, but these findings might be hiding interesting patterns within computer science. The mentioned Sci-Hub log data was used in this paper to analyse downloads of computer science papers based on DBLP’s list of computer science publications. The top downloads of computer science papers were analysed, together with the geographical location of Sci-Hub users, the most downloaded publishers, types of papers downloaded, and downloads of computer science papers per publication year. The results of this research can be used to improve legal access to the most relevant scientific repositories or journals for the computer science field.

On the interconnection of stable protein complexes: inter-complex hubs and their conservation in Saccharomyces cerevisiae and Homo sapiens networks.

Science.gov (United States)

Guerra, Concettina

2015-01-01

Protein complexes are key molecular entities that perform a variety of essential cellular functions. The connectivity of proteins within a complex has been widely investigated with both experimental and computational techniques. We developed a computational approach to identify and characterise proteins that play a role in interconnecting complexes. We computed a measure of inter-complex centrality, the crossroad index, based on disjoint paths connecting proteins in distinct complexes and identified inter-complex hubs as proteins with a high value of the crossroad index. We applied the approach to a set of stable complexes in Saccharomyces cerevisiae and in Homo sapiens. Just as done for hubs, we evaluated the topological and biological properties of inter-complex hubs addressing the following questions. Do inter-complex hubs tend to be evolutionary conserved? What is the relation between crossroad index and essentiality? We found a good correlation between inter-complex hubs and both evolutionary conservation and essentiality.

Using the CER Hub to ensure data quality in a multi-institution smoking cessation study.

Science.gov (United States)

Walker, Kari L; Kirillova, Olga; Gillespie, Suzanne E; Hsiao, David; Pishchalenko, Valentyna; Pai, Akshatha Kalsanka; Puro, Jon E; Plumley, Robert; Kudyakov, Rustam; Hu, Weiming; Allisany, Art; McBurnie, MaryAnn; Kurtz, Stephen E; Hazlehurst, Brian L

2014-01-01

Comparative effectiveness research (CER) studies involving multiple institutions with diverse electronic health records (EHRs) depend on high quality data. To ensure uniformity of data derived from different EHR systems and implementations, the CER Hub informatics platform developed a quality assurance (QA) process using tools and data formats available through the CER Hub. The QA process, implemented here in a study of smoking cessation services in primary care, used the 'emrAdapter' tool programmed with a set of quality checks to query large samples of primary care encounter records extracted in accord with the CER Hub common data framework. The tool, deployed to each study site, generated error reports indicating data problems to be fixed locally and aggregate data sharable with the central site for quality review. Across the CER Hub network of six health systems, data completeness and correctness issues were prevalent in the first iteration and were considerably improved after three iterations of the QA process. A common issue encountered was incomplete mapping of local EHR data values to those defined by the common data framework. A highly automated and distributed QA process helped to ensure the correctness and completeness of patient care data extracted from EHRs for a multi-institution CER study in smoking cessation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Using hybrid latent class model for city-HUBs´users behaviour analysis

OpenAIRE

Di Ciommo, Floridea; Monzón de Cáceres, Andrés; Oña, Rocío de; Oña López, Juan de; Hernández del Olmo, Sara

2014-01-01

Data from an attitudinal survey and stated preference ranking experiment conducted in two urban European interchanges (i.e. City-HUBs) in Madrid (Spain) and Thessaloniki (Greece) show that the importance that City-HUBs users attach to the intermodal infrastructure varies strongly as a function of their perceptions of time spent in the interchange (i.e.intermodal transfer and waiting time). A principal components analysis allocates respondents (i.e. city-HUB users) to two classes with substant...

Functional Hubs in Mild Cognitive Impairment

Science.gov (United States)

Navas, Adrián; Papo, David; Boccaletti, Stefano; Del-Pozo, F.; Bajo, Ricardo; Maestú, Fernando; Martínez, J. H.; Gil, Pablo; Sendiña-Nadal, Irene; Buldú, Javier M.

We investigate how hubs of functional brain networks are modified as a result of mild cognitive impairment (MCI), a condition causing a slight but noticeable decline in cognitive abilities, which sometimes precedes the onset of Alzheimer's disease. We used magnetoencephalography (MEG) to investigate the functional brain networks of a group of patients suffering from MCI and a control group of healthy subjects, during the execution of a short-term memory task. Couplings between brain sites were evaluated using synchronization likelihood, from which a network of functional interdependencies was constructed and the centrality, i.e. importance, of their nodes was quantified. The results showed that, with respect to healthy controls, MCI patients were associated with decreases and increases in hub centrality respectively in occipital and central scalp regions, supporting the hypothesis that MCI modifies functional brain network topology, leading to more random structures.

MODELS AND METHODS FOR LOGISTICS HUB LOCATION: A REVIEW TOWARDS TRANSPORTATION NETWORKS DESIGN

Directory of Open Access Journals (Sweden)

Carolina Luisa dos Santos Vieira

Full Text Available ABSTRACT Logistics hubs affect the distribution patterns in transportation networks since they are flow-concentrating structures. Indeed, the efficient moving of goods throughout supply chains depends on the design of such networks. This paper presents a literature review on the logistics hub location problem, providing an outline of modeling approaches, solving techniques, and their applicability to such context. Two categories of models were identified. While multi-criteria models may seem best suited to find optimal locations, they do not allow an assessment of the impact of new hubs on goods flow and on the transportation network. On the other hand, single-criterion models, which provide location and flow allocation information, adopt network simplifications that hinder an accurate representation of the relationshipbetween origins, destinations, and hubs. In view of these limitations we propose future research directions for addressing real challenges of logistics hubs location regarding transportation networks design.

Looking Into Pandora's Box: The Content Of Sci-Hub And Its Usage

OpenAIRE

Greshake, Bastian

2017-01-01

Despite the growth of Open Access, potentially illegally circumventing paywalls to access scholarly publications is becoming a more mainstream phenomenon. The web service Sci-Hub is amongst the biggest facilitators of this, offering free access to around 62 million publications. So far it is not well studied how and why its users are accessing publications through Sci-Hub. By utilizing the recently released corpus of Sci-Hub and comparing it to the data of  ~28 million downloads done through ...

Optimal integrated sizing and planning of hubs with midsize/large CHP units considering reliability of supply

International Nuclear Information System (INIS)

Moradi, Saeed; Ghaffarpour, Reza; Ranjbar, Ali Mohammad; Mozaffari, Babak

2017-01-01

Highlights: • New hub planning formulation is proposed to exploit assets of midsize/large CHPs. • Linearization approaches are proposed for two-variable nonlinear CHP fuel function. • Efficient operation of addressed CHPs & hub devices at contingencies are considered. • Reliability-embedded integrated planning & sizing is formulated as one single MILP. • Noticeable results for costs & reliability-embedded planning due to mid/large CHPs. - Abstract: Use of multi-carrier energy systems and the energy hub concept has recently been a widespread trend worldwide. However, most of the related researches specialize in CHP systems with constant electricity/heat ratios and linear operating characteristics. In this paper, integrated energy hub planning and sizing is developed for the energy systems with mid-scale and large-scale CHP units, by taking their wide operating range into consideration. The proposed formulation is aimed at taking the best use of the beneficial degrees of freedom associated with these units for decreasing total costs and increasing reliability. High-accuracy piecewise linearization techniques with approximation errors of about 1% are introduced for the nonlinear two-dimensional CHP input-output function, making it possible to successfully integrate the CHP sizing. Efficient operation of CHP and the hub at contingencies is extracted via a new formulation, which is developed to be incorporated to the planning and sizing problem. Optimal operation, planning, sizing and contingency operation of hub components are integrated and formulated as a single comprehensive MILP problem. Results on a case study with midsize CHPs reveal a 33% reduction in total costs, and it is demonstrated that the proposed formulation ceases the need for additional components/capacities for increasing reliability of supply.

The Banana Genome Hub

Science.gov (United States)

Droc, Gaëtan; Larivière, Delphine; Guignon, Valentin; Yahiaoui, Nabila; This, Dominique; Garsmeur, Olivier; Dereeper, Alexis; Hamelin, Chantal; Argout, Xavier; Dufayard, Jean-François; Lengelle, Juliette; Baurens, Franc-Christophe; Cenci, Alberto; Pitollat, Bertrand; D’Hont, Angélique; Ruiz, Manuel; Rouard, Mathieu; Bocs, Stéphanie

2013-01-01

Banana is one of the world’s favorite fruits and one of the most important crops for developing countries. The banana reference genome sequence (Musa acuminata) was recently released. Given the taxonomic position of Musa, the completed genomic sequence has particular comparative value to provide fresh insights about the evolution of the monocotyledons. The study of the banana genome has been enhanced by a number of tools and resources that allows harnessing its sequence. First, we set up essential tools such as a Community Annotation System, phylogenomics resources and metabolic pathways. Then, to support post-genomic efforts, we improved banana existing systems (e.g. web front end, query builder), we integrated available Musa data into generic systems (e.g. markers and genetic maps, synteny blocks), we have made interoperable with the banana hub, other existing systems containing Musa data (e.g. transcriptomics, rice reference genome, workflow manager) and finally, we generated new results from sequence analyses (e.g. SNP and polymorphism analysis). Several uses cases illustrate how the Banana Genome Hub can be used to study gene families. Overall, with this collaborative effort, we discuss the importance of the interoperability toward data integration between existing information systems. Database URL: http://banana-genome.cirad.fr/ PMID:23707967

Location of an intermediate hub for port activities

Science.gov (United States)

Burciu, Ş.; Ştefănică, C.; Roşca, E.; Dragu, V.; Ruscă, F.

2015-11-01

An intermediate hub might increase the accessibility level of ports but also hinterland and so it can be considered more than a facility with a transhipment role. These hubs might lead to the development of other transport services and enhance their role in gathering and covering economic centres within hinterlands and also getting the part of logistic facility for the ports, with effects on port utilization and its connectivity to global economy. A new location for a hub terminal leads to reduced transport distances within hinterland, with decreased transport costs and external effects, so with gains in people's life quality. Because the production and distribution systems are relatively fixed on short and medium term and the location decisions are strategic and on long term, the logistic chains activities location models have to consider the uncertainties regarding the possible future situations. In most models, production costs are considered equal, the location problem reducing itself to a problem that aims to minimize the total transport costs, meaning the transport problem. The main objective of the paper is to locate a hub terminal that links the producers of cereals that are going to be exported by naval transportation with the Romanian fluvial-maritime ports (Galaţi, Brăila). GIS environment can be used to integrate and analyse a great amount of data and has the ability of using functions as location - allocation models necessary both to private and public sector, being able to determine the optimal location for services like factories, warehouses, logistic platforms and other public services.

Reflections of Preservice Information Technology Teachers Regarding Cyberbullying

Science.gov (United States)

Akbulut, Yavuz; Cuhadar, Cem

2011-01-01

The current phenomenological study addressed the reflections of preservice information technology (IT) teachers regarding their cyberbullying or victimization experiences. Fifty five preservice IT teachers at a Turkish teacher training institution were offered a lecture with the purpose of awareness-raising on cyberbullying, which was followed by…

Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices

Science.gov (United States)

Munday, Jeremy

2016-01-01

Solar sails offer an opportunity for a CubeSatscale, propellant-free spacecraft technology that enables long-term and long-distance missions not possible with traditional methods. Solar sails operate using the transfer of linear momentum from photons of sunlight reflected from the surface of the sail. To propel the spacecraft, no mechanically moving parts, thrusters, or propellant are needed. However, attitude control, or orientation, is still performed using traditional methods involving reaction wheels and propellant ejection, which severely limit mission lifetime. For example, the current state of the art solutions employed by upcoming missions couple solar sails with a state of the art propellant ejection gas system. Here, the use of the gas thruster has limited the lifetime of the mission. To solve the limited mission lifetime problem, the Propellantless Attitude Control of Solar Sail Technology Utilizing Reflective Control Devices project team is working on propellantless attitude control using thin layers of material, an optical film, electrically switchable from transparent to reflective. The technology is based on a polymer-dispersed liquid crystal (PDLC), which allows this switch upon application of a voltage. This technology removes the need for propellant, which reduces weight and cost while improving performance and lifetime.

Cortical hubs form a module for multisensory integration on top of the hierarchy of cortical networks

Directory of Open Access Journals (Sweden)

Gorka Zamora-López

2010-03-01

Full Text Available Sensory stimuli entering the nervous system follow particular paths of processing, typically separated (segregated from the paths of other modal information. However, sensory perception, awareness and cognition emerge from the combination of information (integration. The corticocortical networks of cats and macaque monkeys display three prominent characteristics: (i modular organisation (facilitating the segregation, (ii abundant alternative processing paths and (iii the presence of highly connected hubs. Here, we study in detail the organisation and potential function of the cortical hubs by graph analysis and information theoretical methods. We find that the cortical hubs form a spatially delocalised, but topologically central module with the capacity to integrate multisensory information in a collaborative manner. With this, we resolve the underlying anatomical substrate that supports the simultaneous capacity of the cortex to segregate and to integrate multisensory information.

High Performance Paper White- and Full-Color Reflective Displays

National Research Council Canada - National Science Library

Fiske, Thomas

2001-01-01

This report documents work performed by a team led by dpiX LLC to develop fabrication technology for a paper-white, video-rate, full-color reflective display technology based on holographically formed...

Energy flow modeling and optimal operation analysis of the micro energy grid based on energy hub

International Nuclear Information System (INIS)

Ma, Tengfei; Wu, Junyong; Hao, Liangliang

2017-01-01

Highlights: • Design a novel architecture for energy hub integrating power hub, cooling hub and heating hub. • The micro energy grid based on energy hub is introduced and its advantages are discussed. • Propose a generic modeling method for the energy flow of micro energy grid. • Propose an optimal operation model for micro energy grid with considering demand response. • The roles of renewable energy, energy storage devices and demand response are discussed separately. - Abstract: The energy security and environmental problems impel people to explore a more efficient, environment friendly and economical energy utilization pattern. In this paper, the coordinated operation and optimal dispatch strategies for multiple energy system are studied at the whole Micro Energy Grid level. To augment the operation flexibility of energy hub, the innovation sub-energy hub structure including power hub, heating hub and cooling hub is put forward. Basing on it, a generic energy hub architecture integrating renewable energy, combined cooling heating and power, and energy storage devices is developed. Moreover, a generic modeling method for the energy flow of micro energy grid is proposed. To minimize the daily operation cost, a day-ahead dynamic optimal operation model is formulated as a mixed integer linear programming optimization problem with considering the demand response. Case studies are undertaken on a community Micro Energy Grid in four different scenarios on a typical summer day and the roles of renewable energy, energy storage devices and demand response are discussed separately. Numerical simulation results indicate that the proposed energy flow modeling and optimal operation method are universal and effective over the entire energy dispatching horizon.

Report on survey on international Hub

International Nuclear Information System (INIS)

Ebisawa, Hirobumi; Hoshino, Junko; Hashimoto, Kazuichiro; Okada, Sohei

2011-03-01

Japan Atomic Energy Agency (JAEA) is promoting initiative to form an international Center of Excellence in line with its aim to accept more researchers/engineers from all over the world. Establishment of 'the Committee for JAEA Internationalization Initiative' was planned in 2010 so as to intensify this initiative, and in February, 2010, we visited research institutions in Europe, which include European Organization for Nuclear Research (CERN), the construction site of ITER in Cadarache, and Rutherford Appleton Laboratory (RAL), with the intention to survey and learn their advanced activities and systems in regard to the International Hub, so that the committee will be able to make fruitful discussion. This report describes strategy taken in each institution for an International Hub, and the state of each institution regarding acceptance and management of overseas researchers and engineers, research environment, living environment/health and welfare, and PR activities/coexistence with the local community. (author)

Design and Deployment of a General Purpose, Open Source LoRa to Wi-Fi Hub and Data Logger

Science.gov (United States)

DeBell, T. C.; Udell, C.; Kwon, M.; Selker, J. S.; Lopez Alcala, J. M.

2017-12-01

Methods and technologies facilitating internet connectivity and near-real-time status updates for in site environmental sensor data are of increasing interest in Earth Science. However, Open Source, Do-It-Yourself technologies that enable plug and play functionality for web-connected sensors and devices remain largely inaccessible for typical researchers in our community. The Openly Published Environmental Sensing Lab at Oregon State University (OPEnS Lab) constructed an Open Source 900 MHz Long Range Radio (LoRa) receiver hub with SD card data logger, Ethernet and Wi-Fi shield, and 3D printed enclosure that dynamically uploads transmissions from multiple wirelessly-connected environmental sensing devices. Data transmissions may be received from devices up to 20km away. The hub time-stamps, saves to SD card, and uploads all transmissions to a Google Drive spreadsheet to be accessed in near-real-time by researchers and GeoVisualization applications (such as Arc GIS) for access, visualization, and analysis. This research expands the possibilities of scientific observation of our Earth, transforming the technology, methods, and culture by combining open-source development and cutting edge technology. This poster details our methods and evaluates the application of using 3D printing, Arduino Integrated Development Environment (IDE), Adafruit's Open-Hardware Feather development boards, and the WIZNET5500 Ethernet shield for designing this open-source, general purpose LoRa to Wi-Fi data logger.

Disrupted Nodal and Hub Organization Account for Brain Network Abnormalities in Parkinson's Disease.

Science.gov (United States)

Koshimori, Yuko; Cho, Sang-Soo; Criaud, Marion; Christopher, Leigh; Jacobs, Mark; Ghadery, Christine; Coakeley, Sarah; Harris, Madeleine; Mizrahi, Romina; Hamani, Clement; Lang, Anthony E; Houle, Sylvain; Strafella, Antonio P

2016-01-01

The recent application of graph theory to brain networks promises to shed light on complex diseases such as Parkinson's disease (PD). This study aimed to investigate functional changes in sensorimotor and cognitive networks in Parkinsonian patients, with a focus on inter- and intra-connectivity organization in the disease-associated nodal and hub regions using the graph theoretical analyses. Resting-state functional MRI data of a total of 65 participants, including 23 healthy controls (HCs) and 42 patients, were investigated in 120 nodes for local efficiency, betweenness centrality, and degree. Hub regions were identified in the HC and patient groups. We found nodal and hub changes in patients compared with HCs, including the right pre-supplementary motor area (SMA), left anterior insula, bilateral mid-insula, bilateral dorsolateral prefrontal cortex (DLPFC), and right caudate nucleus. In general, nodal regions within the sensorimotor network (i.e., right pre-SMA and right mid-insula) displayed weakened connectivity, with the former node associated with more severe bradykinesia, and impaired integration with default mode network regions. The left mid-insula also lost its hub properties in patients. Within the executive networks, the left anterior insular cortex lost its hub properties in patients, while a new hub region was identified in the right caudate nucleus, paralleled by an increased level of inter- and intra-connectivity in the bilateral DLPFC possibly representing compensatory mechanisms. These findings highlight the diffuse changes in nodal organization and regional hub disruption accounting for the distributed abnormalities across brain networks and the clinical manifestations of PD.

A collaborative scheduling model for the supply-hub with multiple suppliers and multiple manufacturers.

Science.gov (United States)

Li, Guo; Lv, Fei; Guan, Xu

2014-01-01

This paper investigates a collaborative scheduling model in the assembly system, wherein multiple suppliers have to deliver their components to the multiple manufacturers under the operation of Supply-Hub. We first develop two different scenarios to examine the impact of Supply-Hub. One is that suppliers and manufacturers make their decisions separately, and the other is that the Supply-Hub makes joint decisions with collaborative scheduling. The results show that our scheduling model with the Supply-Hub is a NP-complete problem, therefore, we propose an auto-adapted differential evolution algorithm to solve this problem. Moreover, we illustrate that the performance of collaborative scheduling by the Supply-Hub is superior to separate decision made by each manufacturer and supplier. Furthermore, we also show that the algorithm proposed has good convergence and reliability, which can be applicable to more complicated supply chain environment.

Design and Analysis of a Novel Speed-Changing Wheel Hub with an Integrated Electric Motor for Electric Bicycles

Directory of Open Access Journals (Sweden)

Yi-Chang Wu

2013-01-01

Full Text Available The aim of this paper is to present an innovative electromechanical device which integrates a brushless DC (BLDC hub motor with a speed-changing wheel hub stored on the rear wheel of an electric bicycle. It combines a power source and a speed-changing mechanism to simultaneously provide functions of power generation and transmission for electric bicycles. As part of the proposed integrated device, the wheel hub consists of a basic planetary gear train providing three forward speeds including a low-speed gear, a direct drive, and a high-speed gear. Each gear is manually controlled by the shift control sleeve to selectively engage or disengage four pawl-and-ratchet clutches based on its clutching sequence table. The number of gear teeth of each gear element of the wheel hub is synthesized. The BLDC hub motor is an exterior-rotor-type permanent-magnet synchronous motor. Two-dimensional finite-element analysis (FEA software is employed to facilitate the motor design and performance analysis. An analysis of the power transmission path at each gear is provided to verify the validity of the proposed design. The results of this work are beneficial to the embodiment, design, and development of novel electromechanical devices for the power and transmission systems of electric bicycles.

Fatigue based design and analysis of wheel hub for Student formula car by Simulation Approach

Science.gov (United States)

Gowtham, V.; Ranganathan, A. S.; Satish, S.; Alexis, S. John; Siva kumar, S.

2016-09-01

In the existing design of Wheel hub used for Student formula cars, the brake discs cannot be removed easily since the disc is mounted in between the knuckle and hub. In case of bend or any other damage to the disc, the replacement of the disc becomes difficult. Further using OEM hub and knuckle that are used for commercial vehicles will result in increase of unsprung mass, which should be avoided in Student formula cars for improving the performance. In this design the above mentioned difficulties have been overcome by redesigning the hub in such a way that the brake disc could be removed easily by just removing the wheel and the caliper and also it will have reduced weight when compared to existing OEM hub. A CAD Model was developed based on the required fatigue life cycles. The forces acting on the hub were calculated and linear static structural analysis was performed on the wheel hub for three different materials using ANSYS Finite Element code V 16.2. The theoretical fatigue strength was compared with the stress obtained from the structural analysis for each material.

Strategies for contracting gas storage and hub services

International Nuclear Information System (INIS)

Auld, J.

1996-01-01

The many efficiencies that can be gained by the natural gas industry in effectively using storage, were demonstrated. The circumstances under which the natural gas industry uses storage and how Market Centres or Hub Services can be strategically used in offering companies the highest flexibility in a tough marketplace, were explained. For example, in North America, storage played an important role during the winter of 95/96, which will be remembered for its extreme cold. That year provided the first true opportunity to test the natural gas delivery system since deregulation in 1985. The fact that natural gas supplies continued to be delivered throughout the entire winter was attributed to the use of stored gas held in reserves to meet the severe demand. The companies that did well, relied on storage and also on the services offered by Hub Services which increased margins for all players in the natural gas industry. Using storage, companies can ensure that field deliveries of gas are kept constant by having storage facilities absorb the swings in market demand. The companies that learn to use storage effectively can create competitive edges over their competition and provide more value to their customers. The three main categories of hub services were also described. These are parking (interruptible storage), gas loans (stored gas can be offered to customers on a term basis for low daily rates), and title exchange (the transfer of gas between buyer and seller). The strategic use of parking, loaned gas, title exchange, direct connections, and InterHub Services can provide customers even greater benefits than are provided by storage-based services. 6 figs

SPARK: Sparsity-based analysis of reliable k-hubness and overlapping network structure in brain functional connectivity.

Science.gov (United States)

Lee, Kangjoo; Lina, Jean-Marc; Gotman, Jean; Grova, Christophe

2016-07-01

Functional hubs are defined as the specific brain regions with dense connections to other regions in a functional brain network. Among them, connector hubs are of great interests, as they are assumed to promote global and hierarchical communications between functionally specialized networks. Damage to connector hubs may have a more crucial effect on the system than does damage to other hubs. Hubs in graph theory are often identified from a correlation matrix, and classified as connector hubs when the hubs are more connected to regions in other networks than within the networks to which they belong. However, the identification of hubs from functional data is more complex than that from structural data, notably because of the inherent problem of multicollinearity between temporal dynamics within a functional network. In this context, we developed and validated a method to reliably identify connectors and corresponding overlapping network structure from resting-state fMRI. This new method is actually handling the multicollinearity issue, since it does not rely on counting the number of connections from a thresholded correlation matrix. The novelty of the proposed method is that besides counting the number of networks involved in each voxel, it allows us to identify which networks are actually involved in each voxel, using a data-driven sparse general linear model in order to identify brain regions involved in more than one network. Moreover, we added a bootstrap resampling strategy to assess statistically the reproducibility of our results at the single subject level. The unified framework is called SPARK, i.e. SParsity-based Analysis of Reliable k-hubness, where k-hubness denotes the number of networks overlapping in each voxel. The accuracy and robustness of SPARK were evaluated using two dimensional box simulations and realistic simulations that examined detection of artificial hubs generated on real data. Then, test/retest reliability of the method was assessed

A preliminary assessment of the potential for 'team science' in DOE Energy Innovation Hubs and Energy Frontier Research Centers

International Nuclear Information System (INIS)

Boardman, Craig; Ponomariov, Branco

2011-01-01

President Obama has called for the development of new energy technologies to address our national energy needs and restore US economic competitiveness. In response, the Department of Energy has established new R and D modalities for energy research and development designed to facilitate collaboration across disciplinary, institutional, and sectoral boundaries. In this research note, we provide a preliminary assessment of the potential for essential mechanisms for coordinated problem solving among diverse actors within two new modalities at the DOE: Energy Innovation Hubs and Energy Frontier Research Centers. - Highlights: → Energy Frontier Research Centers may lack the basic mechanisms for coordinating diverse actors. → Divergent goals across diverse actors may hinder coordination in Energy Innovation Hubs. → The implementation of these and similar energy policies require further investigation.

CVD molybdenum films of high infrared reflectance

Energy Technology Data Exchange (ETDEWEB)

Carver, G. E.

1979-01-01

Molybdenum thin films of high infrared reflectance have been deposited by pyrolytic decomposition of molybdenum carbonyl (Mo(CO)/sub 6/), and by hydrogen reduction of molybdenum pentachloride (MoCl/sub 5/). Reflectance values within 0.7% of the reflectance of supersmooth bulk molybdenum have been attained by annealing films of lower reflectance in both reducing and non-reducing atmospheres. All depositions and anneals proceed at atmospheric pressure, facilitating a continuous, flow-through fabrication. These reflectors combine the high temperature stability of molybdenum thin films with the infrared reflectance of a material such as aluminum. Deposition from Mo(CO)/sub 6/ under oxidizing conditions, and subsequent anneal in a reducing atmosphere, results in films that combine high solar absorptance with low thermal emittance. If anti-reflected, black molybdenum films can serve as highly selective single layer photothermal converters. Structural, compositional, and crystallographic properties have been measured after both deposition and anneal.

The hub-and-spoke organization design revisited: a lifeline for rural hospitals.

Science.gov (United States)

Elrod, James K; Fortenberry, John L

2017-12-13

Characterized by declining populations, high poverty, reduced employment opportunities, and high numbers of uninsured residents, rural communities pose significant challenges for healthcare providers desirous of addressing these medically underserved areas. Such difficult environments, in fact, have forced the closure of many rural hospitals across America, with scores facing the same threat, compelling intensive efforts to identify pathways which will yield an improved future. Collaborations with stronger urban or suburban healthcare institutions offer a prudent avenue for rural hospitals to continue serving their patients. Such relationships can be structured in many different ways, but Willis-Knighton Health System found that its use of the hub-and-spoke organization design set the stage for the institution to cast a vital lifeline to neighboring rural hospitals, affording the relatively seamless integration and assimilation of partner facilities into its network, ensuring continuity of services in remote regions. This article supplies an overview of the hub-and-spoke network and discusses Willis-Knighton Health System's use of it to facilitate the establishment of productive partnerships with rural hospitals. The delivery of healthcare services in rural environments is essential, but with small community hospitals increasingly being under threat, the outlook is not particularly attractive. Partnerships with better positioned healthcare entities offer significant hope, but care must be taken to structure these arrangements optimally. Willis-Knighton Health System found utility and value in its hub-and-spoke organization design, with the insights presented in this account potentially offering a pathway for others to follow as they go about addressing the healthcare needs of rural populations.

Surface-micromachined rotatable member having a low-contact-area hub

Science.gov (United States)

Rodgers, M. Steven; Sniegowski, Jeffry J.; Krygowski, Thomas W.

2003-11-18

A surface-micromachined rotatable member formed on a substrate and a method for manufacturing thereof are disclosed. The surface-micromachined rotatable member, which can be a gear or a rotary stage, has a central hub, and an annulus connected to the central hub by an overarching bridge. The hub includes a stationary axle support attached to the substrate and surrounding an axle. The axle is retained within the axle support with an air-gap spacing therebetween of generally 0.3 .mu.m or less. The rotatable member can be formed by alternately depositing and patterning layers of a semiconductor (e.g. polysilicon or a silicon-germanium alloy) and a sacrificial material and then removing the sacrificial material, at least in part. The present invention has applications for forming micromechanical or microelectromechanical devices requiring lower actuation forces, and providing improved reliability.

Surface--micromachined rotatable member having a low-contact-area hub

Science.gov (United States)

Rodgers, M. Steven; Sniegowski, Jeffry J.

2002-01-01

A surface-micromachined rotatable member formed on a substrate and a method for manufacturing thereof are disclosed. The surface-micromachined rotatable member, which can be a gear or a rotary stage, has a central hub, and an annulus connected to the central hub by an overarching bridge. The hub includes a stationary axle support attached to the substrate and surrounding an axle. The axle is retained within the axle support with an air-gap spacing therebetween of generally 0.3 .mu.m or less. The rotatable member can be formed by alternately depositing and patterning layers of a semiconductor (e.g. polysilicon or a silicon-germanium alloy) and a sacrificial material and then removing the sacrificial material, at least in part. The present invention has applications for forming micromechanical or microelectromechanical devices requiring lower actuation forces, and providing improved reliability.

A Collaborative Scheduling Model for the Supply-Hub with Multiple Suppliers and Multiple Manufacturers

Directory of Open Access Journals (Sweden)

Guo Li

2014-01-01

Full Text Available This paper investigates a collaborative scheduling model in the assembly system, wherein multiple suppliers have to deliver their components to the multiple manufacturers under the operation of Supply-Hub. We first develop two different scenarios to examine the impact of Supply-Hub. One is that suppliers and manufacturers make their decisions separately, and the other is that the Supply-Hub makes joint decisions with collaborative scheduling. The results show that our scheduling model with the Supply-Hub is a NP-complete problem, therefore, we propose an auto-adapted differential evolution algorithm to solve this problem. Moreover, we illustrate that the performance of collaborative scheduling by the Supply-Hub is superior to separate decision made by each manufacturer and supplier. Furthermore, we also show that the algorithm proposed has good convergence and reliability, which can be applicable to more complicated supply chain environment.

A Collaborative Scheduling Model for the Supply-Hub with Multiple Suppliers and Multiple Manufacturers

Science.gov (United States)

Lv, Fei; Guan, Xu

2014-01-01

This paper investigates a collaborative scheduling model in the assembly system, wherein multiple suppliers have to deliver their components to the multiple manufacturers under the operation of Supply-Hub. We first develop two different scenarios to examine the impact of Supply-Hub. One is that suppliers and manufacturers make their decisions separately, and the other is that the Supply-Hub makes joint decisions with collaborative scheduling. The results show that our scheduling model with the Supply-Hub is a NP-complete problem, therefore, we propose an auto-adapted differential evolution algorithm to solve this problem. Moreover, we illustrate that the performance of collaborative scheduling by the Supply-Hub is superior to separate decision made by each manufacturer and supplier. Furthermore, we also show that the algorithm proposed has good convergence and reliability, which can be applicable to more complicated supply chain environment. PMID:24892104

A note on hierarchical hubbing for a generalization of the VPN problem

NARCIS (Netherlands)

N.K. Olver (Neil)

2016-01-01

textabstractRobust network design refers to a class of optimization problems that occur when designing networks to efficiently handle variable demands. In this context, Fréchette et al. (2013) recently explored hierarchical hubbing: a routing strategy involving a multiplicity of "hubs" connected to

A note on hierarchical hubbing for a generalization of the VPN problem

NARCIS (Netherlands)

Olver, Neil

2016-01-01

Robust network design refers to a class of optimization problems that occur when designing networks to efficiently handle variable demands. In this context, Fréchette et al. (2013) recently explored hierarchical hubbing: a routing strategy involving a multiplicity of "hubs" connected to terminals

Innovation Hub How-To

DEFF Research Database (Denmark)

Berger, Andreas; Brem, Alexander

2016-01-01

in establishing an innovative environment: carefully considering the decision to set up such a center, hiring the right people, designing a framework for effective output, creating a buffer from bureaucratic distractions, securing a leader to champion the effort, focusing on business outcomes, fostering...... disruptive over incremental innovation, and being patient. Regardless of where an innovation hub is established, the key to success lies in hiring creative, intrinsically motivated staff and then giving them the freedom to do what they do best....

Republic of technology: reflections on our future community

Energy Technology Data Exchange (ETDEWEB)

Boorstin, D.J.

1978-01-01

In this book, Mr. Boorstin illuminates our everyday concerns with the author's reflections on the new meaning of technology for America and of America for technology. He gives us a bold new view of the two kinds of revolution - the political and technological - and shows us how and why they are different, and why technological revolutions are irreversible. We are a center from which radiate forces that converge human experience everywhere. Though people around the world may not love one another any more than they did, yet their ways of life tend to become more and more alike. These same overwhelming forces of technology that homogenize the culture of the human race have disrupted the international community of nations; large and small nations become equal, but each day the word nation grows more meaningless. Ideology, tribalism, nationalism, the crusading spirit in religion, bigotry, censorship, racism, persecution, immigration and emigration restriction, tariffs, and chauvinism do interpose barriers and these are explored in this controversial book. These barriers will only be temporary. The converging powers of technology will eventually triumph.

Exploring hubness in Regional Trade Agreements

NARCIS (Netherlands)

Vaal, A. de

2016-01-01

In the plethora of Regional Trade Agreements (RTAs) some countries take in a more central position than others in the sense that some countries are much more engaged with other countries through RTAs. Furthermore, the position of some countries is that of a hub: they have (many) trade

Gas and LNG pricing and trading hub in East Asia: An introduction

Directory of Open Access Journals (Sweden)

Xunpeng Shi

2016-10-01

Full Text Available This paper summarizes the four papers in the special issues on ‘Gas and LNG pricing and trading hub in East Asia’. The papers examine lessons and experience from European hub development, other commodity, the Japanese history on developing of futures markets and inter-fuel substitution in East Asia. The papers finds that liquid futures market is the key to formulate benchmark prices while a well-developed spot market is the foundation; political will and strong leadership are required to overcome the power of incumbents and to restructure the gas market that impede the the development of competitive markets; and East Asia needs to develop its indigenous gas or LNG trading hubs even in low oil prices period and its developing market allows easier changes in new contracts than in existing ones. This hub development requires governments to go through tough domestic market reforms, including liberalization and cooperation with each other and with gas exporters.

Medium-term energy hub management subject to electricity price and wind uncertainty

International Nuclear Information System (INIS)

Najafi, Arsalan; Falaghi, Hamid; Contreras, Javier; Ramezani, Maryam

2016-01-01

Highlights: • A new model for medium-term energy hub management is proposed. • Risk aversion is considered in medium-term energy hub management. • Stochastic programing is used to solve the medium-term energy hub management problem. • Electricity price and wind uncertainty are considered. - Abstract: Energy hubs play an important role in implementing multi-carrier energy systems. More studies are required in both their modeling and operating aspects. In this regard, this paper attempts to develop medium-term management of an energy hub in restructured power systems. A model is presented to manage an energy hub which has electrical energy and natural gas as inputs and electrical and heat energy as outputs. Electricity is procured in various ways, either purchasing it from a pool-based market and bilateral contracts, or producing it from a Combined Heat and Power (CHP) unit, a diesel generator unit and Wind Turbine Generators (WTGs). Pool prices and wind turbine production are subject to uncertainty, which makes energy management a complex puzzle. Heat demand is also procured by a furnace and a CHP unit. Energy hub managers should make decisions whether to purchase electricity from the electricity market and gas from the gas network or to produce electricity using a set of generators to meet the electrical and heat demands in the presence of uncertainties. The energy management objective is to minimize the total cost subject to several technical constraints using stochastic programming. Conditional Value at Risk (CVaR), a well-known risk measure, is used to reduce the unfavorable risk of costs. In doing so, the proposed model is illustrated using a sample test case with actual prices, load and wind speed data. The results show that the minimum cost is obtained by the best decisions involving the electricity market and purchasing natural gas for gas facilities. Considering risk also increases the total expected cost and decreases the CVaR.

Reflections of Preservice Information Technology Teachers Regarding Cyberbullying

Directory of Open Access Journals (Sweden)

Yavuz Akbulut

2011-03-01

Full Text Available The current phenomenological study addressed the reflections of preservice information technology (IT teachers regarding their cyberbullying or victimization experiences. Fifty five preservice IT teachers at a Turkish teacher training institution were offered a lecture with the purpose of awareness-raising on cyberbullying, which was followed by the assignment of take-home reflection papers. Document analysis on reflection papers led researchers to find out underlying themes regarding participants’ cyberbullying or victimization experiences. Findings revealed that females were more likely to be victims than males. Instant messaging programs, e-mail, cell phones and online social networks were used as means to cyberbully. Varying psychological consequences of victimization incidents were reported. Noted reactions to incidents were discontinuing interaction with bullies, and seeking family, peer and legal support. Findings further implied that awareness raising activities regarding cyberbullying were likely to reduce cyberbullying instances and increase preservice teachers’ action competence

Reflections of Preservice Information Technology Teachers Regarding Cyberbullying

Directory of Open Access Journals (Sweden)

Yavuz Akbulut

2011-07-01

Full Text Available The current phenomenological study addressed the reflections of preservice information technology (IT teachers regarding their cyberbullying or victimization experiences. Fifty five preservice IT teachers at a Turkish teacher training institution were offered a lecture with the purpose of awareness-raising on cyberbullying, which was followed by the assignment of take-home reflection papers. Document analysis on reflection papers led researchers to find out underlying themes regarding participants’ cyberbullying or victimization experiences. Findings revealed that females were more likely to be victims than males. Instant messaging programs, e-mail, cell phones and online social networks were used as means to cyberbully. Varying psychological consequences of victimization incidents were reported. Noted reactions to incidents were discontinuing interaction with bullies, and seeking family, peer and legal support. Findings further implied that awareness raising activities regarding cyberbullying were likely to reduce cyberbullying instances and increase preservice teachers’ action competence.

Omni directional mobile robot capable of variable foot printing based on hub type drive module

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyo Joong; Cho, Chang Nho; Kim, Hwi Su; Song, Jae Bok [Korea Univ., Seoul (Korea, Republic of)

2012-03-15

In recent years, an increased amount of research has been carried out on mobile robots to improve the performance of service robots. Mobile robots maximize the mobility of service robots, thus allowing them to work in different areas. However, conventional service robots have their center of mass placed high above the ground, which may cause them to fall when moving at high speed. Furthermore, hub type actuators, which are often used for mobile robots, are large and expensive. In this study, we propose a mobile robot with a hub type actuator unit and a variable footprint mechanism. The proposed variable footprint mechanism greatly improves the stability and mobility of the robot, allowing it to move freely in a narrow space and carry out various tasks. The performance of the proposed robot is verified experimentally.

Design and Analysis of Wind Turbine Blade Hub using Aluminium Alloy AA 6061-T6

Science.gov (United States)

Ravikumar, S.; Jaswanthvenkatram, V.; Sai kumar, Y. J. N. V.; Sohaib, S. Md.

2017-05-01

This work presents the design and analysis of horizontal axis wind turbine blade hub using different material. The hub is very crucial part of the wind turbine, which experience the loads from the blades and the loads were transmitted to the main shaft. At present wind turbine is more expensive and weights more than a million pounds, with the nacelle, rotor hub and blades accounting for most of the weight. In this work Spheroidal graphite cast iron GGG 40.3 is replaced by aluminium alloy 6061-T6 to enhance the casting properties and also to improve the strength-weight ratio. This transition of material leads to reduction in weight of the wind turbine. All the loads caused by wind and extreme loads on the blades are transferred to the hub. Considering the IEC 61400-1 standard for defining extreme loads on the hub the stress and deflection were calculated on the hub by using Finite element Analysis. Result obtained from ANSYS is compared and discussed with the existing design.

Highly reflective polymeric substrates functionalized utilizing atomic layer deposition

Science.gov (United States)

Zuzuarregui, Ana; Coto, Borja; Rodríguez, Jorge; Gregorczyk, Keith E.; Ruiz de Gopegui, Unai; Barriga, Javier; Knez, Mato

2015-08-01

Reflective surfaces are one of the key elements of solar plants to concentrate energy in the receivers of solar thermal electricity plants. Polymeric substrates are being considered as an alternative to the widely used glass mirrors due to their intrinsic and processing advantages, but optimizing both the reflectance and the physical stability of polymeric mirrors still poses technological difficulties. In this work, polymeric surfaces have been functionalized with ceramic thin-films by atomic layer deposition. The characterization and optimization of the parameters involved in the process resulted in surfaces with a reflection index of 97%, turning polymers into a real alternative to glass substrates. The solution we present here can be easily applied in further technological areas where seemingly incompatible combinations of polymeric substrates and ceramic coatings occur.

Highly reflective polymeric substrates functionalized utilizing atomic layer deposition

Energy Technology Data Exchange (ETDEWEB)

Zuzuarregui, Ana, E-mail: a.zuzuarregui@nanogune.eu; Gregorczyk, Keith E. [CIC Nanogune Consolider, de Tolosa Hiribidea 76, 20018 San Sebastián (Spain); Coto, Borja; Ruiz de Gopegui, Unai; Barriga, Javier [IK4-Tekniker, Iñaki Goenaga 5, 20600 Eibar (Spain); Rodríguez, Jorge [Torresol Energy (SENER Group), Avda. de Zugazarte 61, 48930 Las Arenas (Spain); Knez, Mato [CIC Nanogune Consolider, de Tolosa Hiribidea 76, 20018 San Sebastián (Spain); IKERBASQUE Basque Foundation for Science, Maria Diaz de Haro 3, 48013 Bilbao (Spain)

2015-08-10

Reflective surfaces are one of the key elements of solar plants to concentrate energy in the receivers of solar thermal electricity plants. Polymeric substrates are being considered as an alternative to the widely used glass mirrors due to their intrinsic and processing advantages, but optimizing both the reflectance and the physical stability of polymeric mirrors still poses technological difficulties. In this work, polymeric surfaces have been functionalized with ceramic thin-films by atomic layer deposition. The characterization and optimization of the parameters involved in the process resulted in surfaces with a reflection index of 97%, turning polymers into a real alternative to glass substrates. The solution we present here can be easily applied in further technological areas where seemingly incompatible combinations of polymeric substrates and ceramic coatings occur.

Highly reflective polymeric substrates functionalized utilizing atomic layer deposition

International Nuclear Information System (INIS)

Zuzuarregui, Ana; Gregorczyk, Keith E.; Coto, Borja; Ruiz de Gopegui, Unai; Barriga, Javier; Rodríguez, Jorge; Knez, Mato

2015-01-01

Reflective surfaces are one of the key elements of solar plants to concentrate energy in the receivers of solar thermal electricity plants. Polymeric substrates are being considered as an alternative to the widely used glass mirrors due to their intrinsic and processing advantages, but optimizing both the reflectance and the physical stability of polymeric mirrors still poses technological difficulties. In this work, polymeric surfaces have been functionalized with ceramic thin-films by atomic layer deposition. The characterization and optimization of the parameters involved in the process resulted in surfaces with a reflection index of 97%, turning polymers into a real alternative to glass substrates. The solution we present here can be easily applied in further technological areas where seemingly incompatible combinations of polymeric substrates and ceramic coatings occur

New models to support the professional education of health visitors: A qualitative study of the role of space and place in creating 'community of learning hubs'.

Science.gov (United States)

Donetto, Sara; Malone, Mary; Sayer, Lynn; Robert, Glenn

2017-07-01

In response to a policy-driven workforce expansion in England new models of preparing health visitors for practice have been implemented. 'Community of Learning hubs' (COLHs) are one such model, involving different possible approaches to student support in clinical practice placements (for example, 'long arm mentoring' or 'action learning set' sessions). Such models present opportunities for studying the possible effects of spatiality on the learning experiences of students and newly qualified health visitors, and on team relationships more broadly. To explore a 'community of learning hub' model in health visitor education and reflect on the role of space and place in the learning experience and professional identity development of student health visitors. Qualitative research conducted during first year of implementation. Three 'community of learning hub' projects based in two NHS community Trusts in London during the period 2013-2015. Managers and leads (n=7), practice teachers and mentors (n=6) and newly qualified and student health visitors (n=16). Semi-structured, audio-recorded interviews analysed thematically. Participants had differing views as to what constituted a 'hub' in their projects. Two themes emerged around the spaces that shape the learning experience of student and newly qualified health visitors. Firstly, a generalised need for a 'quiet place' which allows pause for reflection but also for sharing experiences and relieving common anxieties. Secondly, the role of physical arrangements in open-plan spaces to promote access to support from more experienced practitioners. Attention to spatiality can shed light on important aspects of teaching and learning practices, and on the professional identities these practices shape and support. New configurations of time and space as part of educational initiatives can surface new insights into existing practices and learning models. Copyright © 2017. Published by Elsevier Ltd.

KINEMATIC ANALYSES OF THE GOLF SWING HUB PATH AND ITS ROLE IN GOLFER/CLUB KINETIC TRANSFERS

Directory of Open Access Journals (Sweden)

Steven M. Nesbit

2009-06-01

Full Text Available This study analyzed the fundamental geometric and kinematic characteristics of the swing hub path of the golf shot for four diverse subjects. In addition, the role of the hub path geometry in transferring the kinetic quantities from the golfer to the club were investigated. The hub path was found to have a complex geometry with significantly changing radii, and a constantly moving center-of-curvature during the downswing for all subjects. While the size and shape of the hub path differed considerably among the subjects, a three phase radius-based pattern was revealed that aligned with distinct stages of the downswing. Artificially controlling and optimizing the hub path of the better golfer in the group indicated that a non-circular hub path was superior to a constant radius path in minimizing the kinetic loading while generating the highest possible club head velocity. The shape and purpose of the hub path geometry appears to result from a complex combination of achieving equilibrium between the golfer and the club, and a purposeful configuring of the path to control the outward movement of the club while minimizing the kinetic loading on the golfer yet transferring the maximum kinetic quantities to the club. Describing the downswing relative to the hub path phasing is presented and was found to be informative since the phases align with significant swing, kinetic and kinematic markers. These findings challenge golf swing modeling methodologies which fix the center-of-curvature of the hub path thus constraining it to constant radius motion

Abnormal hubs of white matter networks in the frontal-parieto circuit contribute to depression discrimination via pattern classification.

Science.gov (United States)

Qin, Jiaolong; Wei, Maobin; Liu, Haiyan; Chen, Jianhuai; Yan, Rui; Hua, Lingling; Zhao, Ke; Yao, Zhijian; Lu, Qing

2014-12-01

Previous studies had explored the diagnostic and prognostic value of the structural neuroimaging data of MDD and treated the whole brain voxels, the fractional anisotropy and the structural connectivity as classification features. To our best knowledge, no study examined the potential diagnostic value of the hubs of anatomical brain networks in MDD. The purpose of the current study was to provide an exploratory examination of the potential diagnostic and prognostic values of hubs of white matter brain networks in MDD discrimination and the corresponding impaired hub pattern via a multi-pattern analysis. We constructed white matter brain networks from 29 depressions and 30 healthy controls based on diffusion tensor imaging data, calculated nodal measures and identified hubs. Using these measures as features, two types of feature architectures were established, one only included hubs (HUB) and the other contained both hubs and non hubs. The support vector machine classifiers with Gaussian radial basis kernel were used after the feature selection. Moreover, the relative contribution of the features was estimated by means of the consensus features. Our results presented that the hubs (including the bilateral dorsolateral part of superior frontal gyrus, the left middle frontal gyrus, the bilateral middle temporal gyrus, and the bilateral inferior temporal gyrus) played an important role in distinguishing the depressions from healthy controls with the best accuracy of 83.05%. Moreover, most of the HUB consensus features located in the frontal-parieto circuit. These findings provided evidence that the hubs could be served as valuable potential diagnostic measure for MDD, and the hub-concentrated lesion distribution of MDD was primarily anchored within the frontal-parieto circuit. Copyright © 2014 Elsevier Inc. All rights reserved.

A framework for creating an ICT knowledge hub in Zimbabwe: A holistic approach in fostering economic growth

Directory of Open Access Journals (Sweden)

Gilbert Mahlangu

2018-01-01

Full Text Available ICT knowledge hubs are important resources for a country to grow towards an innovative economy. Their growth has been viewed as a node point for techno-prenuership development and economic sustainability by many countries. The purpose of this study was to establish how Zimbabwe as a developing country should move towards the creation of an ICT knowledge hub that will promote economic growth in line with the Zimbabwe Agenda for Sustainable Socio-Economic Transformation (ZimAsset economic blueprint crafted in 2013. A qualitative research design was used whereby literature was conducted to establish models for ICT Knowledge hub creation while two focus group discussions were held with academia, research agents and software developers to achieve face validity and in-depth interviews were held with officials from The Ministry of ICT Postal and Courier services. The consensus was reached on the need for creating a focal point which will act as a cyber-port where ICT driven solutions can be obtained based on the industry needs. The focus group discussions settled for four components in creating an ICT knowledge hub. These are planning function, development function, management function and co-ordinating function. The research also established that the Ministry of ICT and Courier services in Zimbabwe has set up an innovation fund to encourage and reward innovation and craftsmanship in Zimbabwe mainly targeted at the youths. The government acquired the high-performance computing facility which is stationed at the University of Zimbabwe. The ICT hub should be used to facilitate access and use of this resource. Every country should therefore strive to create its own centre of innovation which enables it to gain maximum utility from its indigenous people in order to fully utilise ICTs for industry development and spearhead economic growth. The study recommends that there is need for establishing an ICT Knowledge hub in the country.

Disrupted nodal and hub organization account for brain network abnormalities in Parkinson’s disease

Directory of Open Access Journals (Sweden)

Yuko Koshimori

2016-11-01

Full Text Available The recent application of graph theory to brain networks promises to shed light on complex diseases such as Parkinson’s disease. This study aimed to investigate functional changes in sensorimotor and cognitive networks in parkinsonian patients, with a focus on inter- and intra-connectivity organization in the disease-associated nodal and hub regions using the graph theoretical analyses. Resting-state functional MRI data of a total of 65 participants, including 23 healthy controls and 42 patients, were investigated in 120 nodes for local efficiency, betweenness centrality, and degree. Hub regions were identified in the healthy control and patient groups. We found nodal and hub changes in patients compared with healthy controls, including the right pre-supplementary motor area, left anterior insula, bilateral mid-insula, bilateral dorsolateral prefrontal cortex, and right caudate nucleus. In general, nodal regions within the sensorimotor network (i.e. right pre-supplementary motor area and right mid-insula displayed weakened connectivity, with the former node associated with more severe bradykinesia, and impaired integration with default mode network regions. The left mid-insula also lost its hub properties in patients. Within the executive networks, the left anterior insular cortex lost its hub properties in patients, while a new hub region was identified in the right caudate nucleus, paralleled by an increased level of inter- and intra-connectivity in the bilateral dorsolateral prefrontal cortex possibly representing compensatory mechanisms. These findings highlight the diffuse changes in nodal organization and regional hub disruption accounting for the distributed abnormalities across brain networks and the clinical manifestations of Parkinson’s disease.

Analysis and Modeling of Ground Operations at Hub Airports

Science.gov (United States)

Atkins, Stephen (Technical Monitor); Andersson, Kari; Carr, Francis; Feron, Eric; Hall, William D.

2000-01-01

Building simple and accurate models of hub airports can considerably help one understand airport dynamics, and may provide quantitative estimates of operational airport improvements. In this paper, three models are proposed to capture the dynamics of busy hub airport operations. Two simple queuing models are introduced to capture the taxi-out and taxi-in processes. An integer programming model aimed at representing airline decision-making attempts to capture the dynamics of the aircraft turnaround process. These models can be applied for predictive purposes. They may also be used to evaluate control strategies for improving overall airport efficiency.

Wiittgensteins's contributions to a Philosophical reflection on technology

Directory of Open Access Journals (Sweden)

Geraldo Dôres Armendane

2016-12-01

Full Text Available This article examines Wittgenstein’s cultural pessimism on the progress of Western techno-scientific civilization in the first half of the twentieth century, as well as the contributions of the Austrian thinker for a philosophical reflection on technology. We will also show that Wittgenstein’s philosophical position was based on a deep and intense activity of thought and language. The text is divided on in three parts: the first shows Wittgenstein’s cultural pessimism on the technological civilization progress; the second shows Wittgenstein's relationship with science and his strong opposition to the scientist ideology; the third presents Wittgenstein’s conception of philosophy therapy including for the uses of technological civilization. Finally, we conclude by showing that Wittgenstein's philosophy avoids the use of the "ladder" dealing with problems in the contemporary world.

Application of hydraulically assembled shaft coupling hubs to large agitators

International Nuclear Information System (INIS)

Murray, W.E.; Anderson, T.D.; Bethmann, H.K.

1991-01-01

This paper describes the basis for and implementation of hydraulically assembled shaft coupling hubs for large tank-mounted agitators. This modification to the original design was intended to minimize maintenance personnel exposure to ionizing radiation and also provide for disassembly capability without damage to shafts or hubs. In addition to realizing these objectives, test confirmed that the modified couplings reduced agitator shaft end runouts approximately 65%, thereby reducing bearing loads and increasing service life, a significant enhancement for a nuclear facility. 5 refs

Morality and ethics in high technology

International Nuclear Information System (INIS)

Schroeter, K.U.

2003-01-01

The ethical debate about what is feasible culminates, for one side, in the indignant moral question whether man is allowed to do all he is able to do and, for the other side, in the very obligation to keep redefining the limits of creation, and to act accordingly. Consequently, the Young Generation, at their meeting in Gronau, Westphalia (about which we reported), discussed about ''High Technology - Responsible on Ethical and Moral Grounds?'' The paper presented to the participants by pastor Kai Uwe Schroeter reflects this dichotomy, but also takes a clear position in favor of the expansion of nuclear power. This issue of atw contains a revised version of the paper. It is published in the hope that it will furnish arguments for the philosophical and ethical debates about high technology. (orig.) [de

Eliciting and Assessing Reflective Practice: A Case Study in Web 2.0 Technologies

Science.gov (United States)

Parkes, Kelly A.; Kajder, Sara

2010-01-01

This paper focuses on the role of multimodal technologies in facilitating reflective processes and the subsequent assessment of reflectivity for students in pre-professional programs. Reflective practice has been established as a critical tool for developing identity in and on practice. This paper will focus firstly on reviewing salient literature…

Biaxial wheel/hub test facility. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Fischer, G.; Grubisic, V. [eds.

2000-07-01

The 4{sup th} meeting aims to exchange the experience and knowledge of engineers during several presentations and discussions about new developments required for a reliable, time and cost reducing validation of the wheel/hub assembly. Tremendous development of the wheel performance, described by the ratio of the rated load (kg) versus the wheel weight (kg) had taken place during the last 5000 years. Starting from the ratio of 3 for wooden 2-piece-disc-wheels in Mesopotamia it needed nearly 1000 years to increase the ratio to approx 5 at light-weight spoke wheels for fighting carriages, found in the grave of king Tutenchamon in Egypt. Modern light alloy wheels of commercial vehicles reach values up to 160 kg/kg. Additionally the comlex design of the modern systems for cars and commercial vehicles comprising wheel, brake, hub, bearing, spindle and hub carrier, including different materials and their treatment, fasteners, press-fits, require an appropriate testing procedure. The variable loading conditions, caused by operational wheel forces, brake and torque moments including heating, may result in changing tolerances and press-fits during operation and consequently in different damage mechanisms. This can be simulated in the Biaxial Wheel Test Machine, whereby corresponding load programs are necessary. An overview about all biaxial test machines in usage at the end of 1999 is shown in the introduction. The total number is 17 for cars, 7 for commercial vehicles and 1 for trains. The six presentations of this meeting were consequently concentrated on: (a) recommendations for a standardization of load programs of the German Wheel Committee, (b) the simulation of brake and torque events and (c) the possibility for a numerical stress analyses and fatigue life assessment. (orig./AKF)

Comparative efficiency of wind turbines with different heights of rotor hubs: performance evaluation for Latvia

International Nuclear Information System (INIS)

Bezrukovs, V P; Zacepins, A J; Bezrukovs, V V

2014-01-01

Performance evaluation of wind turbines (WT) for different heights of the rotor hub is made based on the wind speed and direction data obtained in 2009–2013 on-shore in the north of Latvia using a LOGGER 9200 Symphonie measurement system mounted on a 60 m mast. Based on the measurement analysis results, wind speed distribution curves have been modelled for heights of up to 200 m using power and logarithmic (log) law approximation methods. The curves for the modelled Weibull's parameters are plotted in dependence on height. The efficiency comparison is made for different WT types taking into account the distribution of the wind energy potential in height in the Latvian territory. The annual electric energy production was calculated for the WTs with different heights of rotor hubs. In the calculations the technical data on the following WT types were used: E-3120 (50 kW, hub height 20.5/30.5/36.5/42.7 m), E-33 (330 kW, hub height 37/44/49/50 m), E-48 (800 kW, hub height 50/60/75 m) and E-82 (2.3 MW, hub height of 78/85/98/108/138 m)

Puertos, espacio y globalización: el desarrollo de hubs en México

Directory of Open Access Journals (Sweden)

Carlos Daniel Martner Peyrelongue

2010-01-01

Full Text Available Los puertos hubs se presentan como el nuevo paradigma de desarrollo del transporte y el comercio marítimo internacional en la globalización. Prácticamente todos los países latinoamericanos anuncian megaproyectos para el desarrollo de puertos hubs en sus litorales, generando grandes expectativas de desarrollo regional, con un débil sustento tanto teórico como empírico. En este sentido, el presente trabajo busca contribuir a la caracterización del modelo de puertos hubs en países periféricos dentro de la economíamundo capitalista, aludiendo, en especial, al caso mexicano. Se trata de aportar elementos de análisis para reconocer, a grandes rasgos, las posibilidades del desarrollo de hubs en los litorales mexicanos, desde la perspectiva de los estudios regionales y la geografía del transporte.

40 CFR 450.24 - New source performance standards reflecting the best available demonstrated control technology...

Science.gov (United States)

2010-07-01

... performance standards reflecting the best available demonstrated control technology (NSPS). Any new source... 40 Protection of Environment 29 2010-07-01 2010-07-01 false New source performance standards reflecting the best available demonstrated control technology (NSPS). 450.24 Section 450.24 Protection of...

A novel method to identify hub pathways of rheumatoid arthritis based on differential pathway networks.

Science.gov (United States)

Wei, Shi-Tong; Sun, Yong-Hua; Zong, Shi-Hua

2017-09-01

The aim of the current study was to identify hub pathways of rheumatoid arthritis (RA) using a novel method based on differential pathway network (DPN) analysis. The present study proposed a DPN where protein‑protein interaction (PPI) network was integrated with pathway‑pathway interactions. Pathway data was obtained from background PPI network and the Reactome pathway database. Subsequently, pathway interactions were extracted from the pathway data by building randomized gene‑gene interactions and a weight value was assigned to each pathway interaction using Spearman correlation coefficient (SCC) to identify differential pathway interactions. Differential pathway interactions were visualized using Cytoscape to construct a DPN. Topological analysis was conducted to identify hub pathways that possessed the top 5% degree distribution of DPN. Modules of DPN were mined according to ClusterONE. A total of 855 pathways were selected to build pathway interactions. By filtrating pathway interactions of weight values >0.7, a DPN with 312 nodes and 791 edges was obtained. Topological degree analysis revealed 15 hub pathways, such as heparan sulfate/heparin‑glycosaminoglycan (HS‑GAG) degradation, HS‑GAG metabolism and keratan sulfate degradation for RA based on DPN. Furthermore, hub pathways were also important in modules, which validated the significance of hub pathways. In conclusion, the proposed method is a computationally efficient way to identify hub pathways of RA, which identified 15 hub pathways that may be potential biomarkers and provide insight to future investigation and treatment of RA.

Hub location problems in transportation networks

DEFF Research Database (Denmark)

Gelareh, Shahin; Nickel, Stefan

2011-01-01

In this paper we propose a 4-index formulation for the uncapacitated multiple allocation hub location problem tailored for urban transport and liner shipping network design. This formulation is very tight and most of the tractable instances for MIP solvers are optimally solvable at the root node....... also introduce fixed cost values for Australian Post (AP) dataset....

Cavity ring-down technique for measurement of reflectivity of high ...

Indian Academy of Sciences (India)

Laser & Plasma Technology Division, Bhabha Atomic Research Centre, Mumbai 400 085,. India. *Corresponding author. E-mail: gsridhar@barc.gov.in. Abstract. A simple, accurate and reliable method for measuring the reflectivity of laser- ... Keywords. Cavity ring-down method; reflectivity measurement; optical resonator.

"I'm Just Not That Comfortable with Technology": Student Perceptions of and Preferences for Web 2.0 Technologies in Reflective Journals

Science.gov (United States)

O'Connell, Timothy S.; Dyment, Janet E.

2016-01-01

Encouraging reflective practice and developing reflective practitioners is a goal of many disciplines in higher education. A variety of pedagogical techniques have been used to promote critical reflection including portfolios, narratives and reflective journals. Over the past decade, the use of Web 2.0 technologies with students has been…

Role of governance in creating a commodity hub: A comparative analysis

Directory of Open Access Journals (Sweden)

M.P. Haris

2016-10-01

Full Text Available The body of work on natural gas hubs has been expanding rapidly in recent years, with most of the current work examining the creation of gas hubs focusing on either the European experience or the North American experience. In this paper, we adopt a different perspective and place the focus on experience of hub building from other international commodities. We analyse three commodities - crude oil, iron ore and coal, and draw experience on the role of governance in development of hub based prices. In particular, we propose that the role of governance is different at different stages of the pricing transition to market based pricing. Governance could play an important role at the initial stage, building the relevant soft and physical infrastructure which facilitates the reaping of first mover advantage. As the market develops, private sector players may prefer less involvement of governance, which may distort markets. With market stabilization, governance should be focused on maintaining stable rules and regulation for private sector development, as well as monitoring for further changes in global trends. To facilitate the building of a benchmark price, the public sector should adopt a long-term and overarching view on industry growth.

Excitatory Neuronal Hubs Configure Multisensory Integration of Slow Waves in Association Cortex

Directory of Open Access Journals (Sweden)

Satoshi Kuroki

2018-03-01

Full Text Available Summary: Multisensory integration (MSI is a fundamental emergent property of the mammalian brain. During MSI, perceptual information encoded in patterned activity is processed in multimodal association cortex. The systems-level neuronal dynamics that coordinate MSI, however, are unknown. Here, we demonstrate intrinsic hub-like network activity in the association cortex that regulates MSI. We engineered calcium reporter mouse lines based on the fluorescence resonance energy transfer sensor yellow cameleon (YC2.60 expressed in excitatory or inhibitory neurons. In medial and parietal association cortex, we observed spontaneous slow waves that self-organized into hubs defined by long-range excitatory and local inhibitory circuits. Unlike directional source/sink-like flows in sensory areas, medial/parietal excitatory and inhibitory hubs had net-zero balanced inputs. Remarkably, multisensory stimulation triggered rapid phase-locking mainly of excitatory hub activity persisting for seconds after the stimulus offset. Therefore, association cortex tends to form balanced excitatory networks that configure slow-wave phase-locking for MSI. Video Abstract: : Kuroki et al. performed cell-type-specific, wide-field FRET-based calcium imaging to visualize cortical network activity induced by multisensory inputs. They observed phase-locking of cortical slow waves in excitatory neuronal hubs in association cortical areas that may underlie multisensory integration. Keywords: wide-field calcium imaging, multisensory integration, cortical slow waves, association cortex, phase locking, fluorescence resonance energy transfer, spontaneous activity, excitatory neuron, inhibitory neuron, mouse

PERSEUS-HUB: Interactive and Collective Exploration of Large-Scale Graphs

Directory of Open Access Journals (Sweden)

Di Jin

2017-07-01

Full Text Available Graphs emerge naturally in many domains, such as social science, neuroscience, transportation engineering, and more. In many cases, such graphs have millions or billions of nodes and edges, and their sizes increase daily at a fast pace. How can researchers from various domains explore large graphs interactively and efficiently to find out what is ‘important’? How can multiple researchers explore a new graph dataset collectively and “help” each other with their findings? In this article, we present Perseus-Hub, a large-scale graph mining tool that computes a set of graph properties in a distributed manner, performs ensemble, multi-view anomaly detection to highlight regions that are worth investigating, and provides users with uncluttered visualization and easy interaction with complex graph statistics. Perseus-Hub uses a Spark cluster to calculate various statistics of large-scale graphs efficiently, and aggregates the results in a summary on the master node to support interactive user exploration. In Perseus-Hub, the visualized distributions of graph statistics provide preliminary analysis to understand a graph. To perform a deeper analysis, users with little prior knowledge can leverage patterns (e.g., spikes in the power-law degree distribution marked by other users or experts. Moreover, Perseus-Hub guides users to regions of interest by highlighting anomalous nodes and helps users establish a more comprehensive understanding about the graph at hand. We demonstrate our system through the case study on real, large-scale networks.

A preliminary assessment of the potential for 'team science' in DOE Energy Innovation Hubs and Energy Frontier Research Centers

Energy Technology Data Exchange (ETDEWEB)

Boardman, Craig, E-mail: boardman.10@osu.edu [John Glenn School of Public Affairs, Ohio State University (United States); Ponomariov, Branco, E-mail: branco.ponomariov@utsa.edu [Department of Public Administration, University of Texas at San Antonio (United States)

2011-06-15

President Obama has called for the development of new energy technologies to address our national energy needs and restore US economic competitiveness. In response, the Department of Energy has established new R and D modalities for energy research and development designed to facilitate collaboration across disciplinary, institutional, and sectoral boundaries. In this research note, we provide a preliminary assessment of the potential for essential mechanisms for coordinated problem solving among diverse actors within two new modalities at the DOE: Energy Innovation Hubs and Energy Frontier Research Centers. - Highlights: > Energy Frontier Research Centers may lack the basic mechanisms for coordinating diverse actors. > Divergent goals across diverse actors may hinder coordination in Energy Innovation Hubs. > The implementation of these and similar energy policies require further investigation.

The evolution of the MasAgro hubs

NARCIS (Netherlands)

Camacho-Villa, Tania Carolina; Almekinders, Conny; Hellin, Jon; Martinez-Cruz, Tania Eulalia; Rendon-Medel, Roberto; Guevara-Hernández, Francisco; Beuchelt, Tina D.; Govaerts, Bram

2016-01-01

Purpose: Little is known about effective ways to operationalize agricultural innovation processes. We use the MasAgro program in Mexico (which aims to increase maize and wheat productivity, profitability and sustainability), and the experiences of middle level ‘hub managers’, to understand how

76 FR 10328 - Grant of Authority for Subzone Status; Vestas Nacelles America, Inc. (Wind Turbine Nacelles, Hubs...

Science.gov (United States)

2011-02-24

... Status; Vestas Nacelles America, Inc. (Wind Turbine Nacelles, Hubs, Blades and Towers), Brighton, Denver...-purpose subzone at the wind turbine nacelle, hub, blade and tower manufacturing and warehousing facilities... status for activity related to the manufacturing and warehousing of wind turbine nacelles, hubs, blades...

High resolution shear wave reflection surveying for hydrogeological investigations

International Nuclear Information System (INIS)

Johnson, W.J.; Clark, J.C.

1992-08-01

The high resolution S-wave method has been developed to be a powerful tool in mapping subsurface lithology and in conducting groundwater investigations. The research has demonstrated that the resolution obtainable using S-waves in a Coastal Plain environment is more than double than that obtained using conventional reflection, which already offers a higher resolution than any other surface method. Where the mapping of thin clay layers functioning as aquitards or thin sand layers functioning as aquifers are critical to the understanding of groundwater flow, S-wave reflections offer unparalleled possibilities for nondestructive exploration. The field experiment at Cooke Crossroads, South Carolina enabled the detection and mapping of beds in the thickness range of one to three feet. The S-wave reflection technique, in combination with conventional P-wave reflection, has potential to directly detect confined and unconfined aquifers. This is a breakthrough technology that still requires additional research before it can be applied on a commercial basis. Aquifer systems were interpreted from the test data at Cooke Crossroads consistent with theoretical model. Additional research is need in assessing the theoretical response of P- and S-waves to subsurface interfaces within unconsolidated sediments of varying moisture content and lithology. More theoretical modeling and in situ testing are needed to bring our knowledge of these phenomena to the level that oil and gas researchers have done for fluids in sandstones

78 FR 20314 - Jefferson Island Storage & Hub, L.L.C.; Notice of Filing

Science.gov (United States)

2013-04-04

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR13-44-000] Jefferson Island Storage & Hub, L.L.C.; Notice of Filing Take notice that on March 28, 2013, Jefferson Island Storage & Hub, L.L.C. filed to revise its Statement of Operating Conditions to among others, update...

Wave Transformation for International Hub Port Planning (Transformasi Gelombang untuk Perencanaan Pelabuhan Hub Internasional

Directory of Open Access Journals (Sweden)

Denny Nugroho Sugianto

2015-02-01

Full Text Available Indonesia merupakan salah satu negara kepulauan terbesar di dunia sehingga peran pelabuhan sangat vital dalam pembangunan ekonomi. Pelabuhan bukan hanya sekedar sebagai pelengkap infrastruktur, melainkan harus direncanakan dan dikelola dengan baik serta memperhatikan fenomena dinamika perairan laut seperti pola gelombang laut. Data gelombang laut menjadi faktor penting dalam perencanaan tata letak dan tipe bangunan pantai karena dipengaruhi oleh tinggi gelombang signifikan, tunggang pasang surut dan transformasi gelombang. Penelitian ini mengalisis karaketristrik dan bentuk transformasi gelombang untuk perencanaan Pelabuhan Hub Internasional, sebagai studi kasus adalah pelabuhan di Kuala Tanjung, Kabupaten Batu Bara. Pelabuhan di Kuala Tanjung merupakan salah satu dari 2 pelabuhan hub internasional yang direncanakan akan dibangun oleh pemerintah Indonesia. Metode yang digunakan adalah metode kuantitatif yang dilakukan dengan perhitungan statistik dan pemodelan matematik dengan modul hydrodinamic dan spectral wave untuk mengetahui arah penjalaran dan transformasi gelombang. Hasil dari data ECMWF selama 1999–Juni 2014, diketahui tinggi gelombang signifikan (Hs maksimum mencapai 1,69 m dan periode maksimum 8 detik. Karakteristik gelombang termasuk klasifikasi gelombang laut transisi dengan nilai d.L-1 berkisar anrata 0,27–0,48 dan berdasarkan periodenya diklasifikasikan sebagai gelombang gravitasi.Transformasi gelombang terjadi akibat pendangkalan dengan koefesian pendangkalan Ks 0,93–0,98 dan proses refraksi gelombang dengan koefesien Kr 0,97–0,99. Tinggi gelombang pecah Hb sebesar 1,24 meter dengan kedalaman gelombang pecah db sebesar 1,82 meter. Efektifitas desain bangunan terminal di Pelabuhan Kuala Tanjung secara keseluruhan untuk sepanjang musim sebesar 79,8% atau dapat dikatakan cukup efektif dalam meredam gelombang. Kata kunci: transformasi gelombang, tinggi dan periode gelombang, pelabuhan Indonesia is one of the largest

The East African Resilience Innovation Hub | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

Project leadership The Resilience Innovation Hub will be housed within a ... Region at the Levy Mwanawasa Regional Centre, Lusaka -Conflict Early Warning and ... Authority on Development, Addis Ababa This initiative will support innovative ...

Emerging Education Hubs: The Case of Singapore

Science.gov (United States)

Sidhu, Ravinder; Ho, K.-C.; Yeoh, Brenda

2011-01-01

In anticipation of a globalising post-Fordist political economy, countries and universities are increasingly pursuing strategic transnational education and research alliances. This article analyses the Global Schoolhouse, a key education policy platform that aims to transform Singapore into a knowledge and innovation hub by establishing networks…

Waves, currents and sediment transport modelling at the Wave Hub site

OpenAIRE

Gonzalez-Santamaria, Raul

2013-01-01

Primary supervisory team: Qingping Zou and Shunqi Pan This research project uses an integrated modelling system to investigate the effects of a wave farm on nearshore sediment transport at the Wave Hub site. The Wave Hub project is a large scale demonstration site for the development of the operation of arrays of wave energy generation devices located at the southwest coast of the UK where multiple field measurements took place. Particular attention of this study was paid to th...

The OHS consultant as a 'political reflective navigator' in technological change processes

DEFF Research Database (Denmark)

Broberg, Ole

2004-01-01

between different roles and mobilize different types of knowledge depending on the context; the consultant is a navigator in the sense of knowing how to navigate in the complex organization surrounding the technological change process. The competencies of a political reflective navigator are outlined...... of OHS consultants is placed on the line between an expert and a process consultant. Based on evidence from the cases and on the concepts of actor-network theory on technological development, we suggest a supplementary third role, that of the 'political reflective navigator', where the OHS consultant...... is an 'actor' who pursues a work environment agenda in a complex network in which other actors pursue other agendas such as productivity, economics, quality, etc. The consultant is political in the sense of pursuing a work environment agenda; the consultant is reflective in the sense of being able to switch...

Left Frontal Hub Connectivity during Memory Performance Supports Reserve in Aging and Mild Cognitive Impairment.

Science.gov (United States)

Franzmeier, Nicolai; Hartmann, Julia C; Taylor, Alexander N W; Araque Caballero, Miguel Á; Simon-Vermot, Lee; Buerger, Katharina; Kambeitz-Ilankovic, Lana M; Ertl-Wagner, Birgit; Mueller, Claudia; Catak, Cihan; Janowitz, Daniel; Stahl, Robert; Dichgans, Martin; Duering, Marco; Ewers, Michael

2017-01-01

Reserve in aging and Alzheimer's disease (AD) is defined as maintaining cognition at a relatively high level in the presence of neurodegeneration, an ability often associated with higher education among other life factors. Recent evidence suggests that higher resting-state functional connectivity within the frontoparietal control network, specifically the left frontal cortex (LFC) hub, contributes to higher reserve. Following up these previous resting-state fMRI findings, we probed memory-task related functional connectivity of the LFC hub as a neural substrate of reserve. In elderly controls (CN, n = 37) and patients with mild cognitive impairment (MCI, n = 17), we assessed global connectivity of the LFC hub during successful face-name association learning, using generalized psychophysiological interaction analyses. Reserve was quantified as residualized memory performance, accounted for gender and proxies of neurodegeneration (age, hippocampus atrophy, and APOE genotype). We found that greater education was associated with higher LFC-connectivity in both CN and MCI during successful memory. Furthermore, higher LFC-connectivity predicted higher residualized memory (i.e., reserve). These results suggest that higher LFC-connectivity contributes to reserve in both healthy and pathological aging.

Hubs and spokes in Regional Trade Agreements

NARCIS (Netherlands)

Vaal, A. de

2017-01-01

In the plethora of Regional Trade Agreements (RTAs) some countries are involved in much more RTAs than others. Furthermore, some countries take in a position as a hub: they have trade agreements with many other countries, while their partner countries are much less involved in RTA relations. Even

Internal Reflection Sensor for the Cone Penetrometer. Innovative Technology Summary Report

International Nuclear Information System (INIS)

None

2001-01-01

The Internal Reflection Sensor, developed by EIC Laboratories, Inc. as a cone penetrometer based technology, provides real-time detection of subsurface non-aqueous phase liquids (NAPLs). The internal reflection element is positioned against the wall of the cone penetrometer probe such that its sensing face is in contact with the soil or groundwater as the cone is pushed into the subsurface. When NAPL is present and in contact with the sensing face, the internally reflected light is diminished. This results in a decrease in the signal output by the detector - a positive indicator of NAPL presence

Publishing and sharing of hydrologic models through WaterHUB

Science.gov (United States)

Merwade, V.; Ruddell, B. L.; Song, C.; Zhao, L.; Kim, J.; Assi, A.

2011-12-01

Most hydrologists use hydrologic models to simulate the hydrologic processes to understand hydrologic pathways and fluxes for research, decision making and engineering design. Once these tasks are complete including publication of results, the models generally are not published or made available to the public for further use and improvement. Although publication or sharing of models is not required for journal publications, sharing of models may open doors for new collaborations, and avoids duplication of efforts if other researchers are interested in simulating a particular watershed for which a model already exists. For researchers, who are interested in sharing models, there are limited avenues to publishing their models to the wider community. Towards filling this gap, a prototype cyberinfrastructure (CI), called WaterHUB, is developed for sharing hydrologic data and modeling tools in an interactive environment. To test the utility of WaterHUB for sharing hydrologic models, a system to publish and share SWAT (Soil Water Assessment Tool) is developed. Users can utilize WaterHUB to search and download existing SWAT models, and also upload new SWAT models. Metadata such as the name of the watershed, name of the person or agency who developed the model, simulation period, time step, and list of calibrated parameters also published with individual model.

Mapping the changed hubs and corresponding functional connectivity in idiopathic restless legs syndrome.

Science.gov (United States)

Liu, Chunyan; Wang, Jiaojian; Hou, Yue; Qi, Zhigang; Wang, Li; Zhan, Shuqin; Wang, Rong; Wang, Yuping

2018-05-01

The hubs of the brain network play a key role in integrating and transferring information between different functional modules. However, whether the changed pattern in functional network hubs contributes to the onset of leg discomfort symptoms in restless legs syndrome (RLS) patients remains unclear. Using resting-state functional magnetic resonance imaging (rs-fMRI) and graph theory methods, we investigated whether alterations of hubs can be detected in RLS. First, we constructed the whole-brain voxelwise functional connectivity and calculated a functional connectivity strength (FCS) map in each of 16 drug-naive idiopathic RLS patients and 26 gender- and age-matched healthy control (HC) subjects. Next, a two-sample t test was applied to compare the FCS maps between HC and RLS patients, and to identify significant changes in FCS in RLS patients. To further elucidate the corresponding changes in the functional connectivity patterns of the aberrant hubs in RLS patients, whole-brain resting-state functional connectivity analyses for the hub areas were performed. The hub analysis revealed decreased FCS in the cuneus, fusiform gyrus, paracentral lobe, and precuneus, and increased FCS in the superior frontal gyrus and thalamus in idiopathic drug-naive RLS patients. Subsequent functional connectivity analyses revealed decreased functional connectivity in sensorimotor and visual processing networks and increased functional connectivity in the affective cognitive network and cerebellar-thalamic circuit. Furthermore, the mean FCS value in the superior frontal gyrus was significantly correlated with Hamilton Anxiety Rating Scale scores in RLS patients, and the mean FCS value in the fusiform gyrus was significantly correlated with Hamilton Depression Rating Scale scores. These findings may provide novel insight into the pathophysiology of RLS. Copyright © 2018 Elsevier B.V. All rights reserved.

Altered network hub connectivity after acute LSD administration

Directory of Open Access Journals (Sweden)

Felix Müller

Full Text Available LSD is an ambiguous substance, said to mimic psychosis and to improve mental health in people suffering from anxiety and depression. Little is known about the neuronal correlates of altered states of consciousness induced by this substance. Limited previous studies indicated profound changes in functional connectivity of resting state networks after the administration of LSD. The current investigation attempts to replicate and extend those findings in an independent sample. In a double-blind, randomized, cross-over study, 100 μg LSD and placebo were orally administered to 20 healthy participants. Resting state brain activity was assessed by functional magnetic resonance imaging. Within-network and between-network connectivity measures of ten established resting state networks were compared between drug conditions. Complementary analysis were conducted using resting state networks as sources in seed-to-voxel analyses. Acute LSD administration significantly decreased functional connectivity within visual, sensorimotor and auditory networks and the default mode network. While between-network connectivity was widely increased and all investigated networks were affected to some extent, seed-to-voxel analyses consistently indicated increased connectivity between networks and subcortical (thalamus, striatum and cortical (precuneus, anterior cingulate cortex hub structures. These latter observations are consistent with findings on the importance of hubs in psychopathological states, especially in psychosis, and could underlay therapeutic effects of hallucinogens as proposed by a recent model. Keywords: LSD, fMRI, Functional connectivity, Networks, Hubs

Pinoy Nutrition Hub: The Philippine Experience in Addressing Moderate Malnutrition

International Nuclear Information System (INIS)

Ramos, Arlo; Fuentes, Eureka; Duque, Yvonette; Soriano, Nezer; Gomez, Marijo

2014-01-01

Full text: • Objective: Malnutrition is a persistent problem in the Philippines. The 2011 survey of the Food and Nutrition Research Institute reported that 3 out of 10 children are malnourished. Data shows 20.2% of children 0-47 months are underweight while 33.6% are stunted. This rate is higher in depressed areas in the country. PD Hearth is a time and tested effective program model to address malnutrition. But the PDH has minimum standards that need to be followed in the program implementation. However, a developing country like the Philippines has limitations in its resources and implementations. This paper aims to share the Philippine experience in addressing moderate malnutrition through a contextualized and modified PD Hearth approach. The specific objectives of this paper are: - to describe the challenges in implementing PD Hearth in the context of the Philippines; - to describe the innovations and modifications in the PD Hearth; - and, to illustrate the successful intervention of the PNH program against malnourished children in the community. • Methods: The Pinoy Nutrition Hub model is an innovation of PD Hearth approach. The first step was the participatory approach evaluation of existing programs on MNCHN in the communities. The next step was for the stakeholders to identify the gaps and address them. This was followed by gathering lessons learned and good practices that arose from implementing PD Hearth. Innovations were adopted to address restrictions and maximize learning in its implementation. The contextualized approach was called Pinoy Nutrition Hub (PNH). • Outcomes: - The PNH was piloted in three Area Development Programs (ADP) that represent the three island groups of the Philippines. All three ADPs reported improvement in the weight of the malnourished children enrolled in the program. Below is an illustration of the how the actual weight of children in the Visayas ADP increased. Figure 1 (Display Omitted). Average Weight of Malnourished

A State Cyber Hub Operations Framework

Science.gov (United States)

2016-06-01

current and future decision support. Finally, the Hub operations team must track and report key performance indictors ( KPIs ) (established by the state...Region); then mutually agreed-upon core KPIs should be identified and reported at this time. The goal of the Act Element is to implement the decision...Force Headquarters Page 58 JIE Joint Information Environment JMC JIE Management Construct KPI Key Performance Indicator LEA Law Enforcement

Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) concept definition study

Science.gov (United States)

Hughes, C. W.

1983-01-01

Studies were conducted by Hughes Helicopters, Inc. (HHI) for the Applied Technology Laboratory and Aeromechanics Laboratory, U.S. Army Research and Technology Laboratories (AVRADCOM) and the Ames Research Center, National Aeronautics and Space Administration (NASA). Results of predesign studies of advanced main rotor hubs, including bearingless designs, are presented in this report. In addition, the Government's rotor design goals and specifications were reviewed and evaluated. Hub concepts were designed and qualitatively evaluated in order to select the two most promising concepts for further development. Various flexure designs, control systems, and pitchcase designs were investigated during the initial phases of this study. The two designs selected for additional development were designated the V-strap and flat-strap cruciform hubs. These hubs were designed for a four bladed rotor and were sized for 18,400 pounds gross weight with the same diameter (62 feet) and solidity (23 inch chord) as the existing rotor on the Rotor Systems Research Aircraft (RSRA).

40 CFR 450.22 - Effluent limitations reflecting the best available technology economically achievable (BAT).

Science.gov (United States)

2010-07-01

... best available technology economically achievable (BAT). 450.22 Section 450.22 Protection of... limitations reflecting the best available technology economically achievable (BAT). Except as provided in 40... the best available technology economically achievable (BAT). (a) Beginning no later than August 1...

Interferometric Reflectance Imaging Sensor (IRIS—A Platform Technology for Multiplexed Diagnostics and Digital Detection

Directory of Open Access Journals (Sweden)

Oguzhan Avci

2015-07-01

Full Text Available Over the last decade, the growing need in disease diagnostics has stimulated rapid development of new technologies with unprecedented capabilities. Recent emerging infectious diseases and epidemics have revealed the shortcomings of existing diagnostics tools, and the necessity for further improvements. Optical biosensors can lay the foundations for future generation diagnostics by providing means to detect biomarkers in a highly sensitive, specific, quantitative and multiplexed fashion. Here, we review an optical sensing technology, Interferometric Reflectance Imaging Sensor (IRIS, and the relevant features of this multifunctional platform for quantitative, label-free and dynamic detection. We discuss two distinct modalities for IRIS: (i low-magnification (ensemble biomolecular mass measurements and (ii high-magnification (digital detection of individual nanoparticles along with their applications, including label-free detection of multiplexed protein chips, measurement of single nucleotide polymorphism, quantification of transcription factor DNA binding, and high sensitivity digital sensing and characterization of nanoparticles and viruses.

Guiding Principles for Data Architecture to Support the Pathways Community HUB Model.

Science.gov (United States)

Zeigler, Bernard P; Redding, Sarah; Leath, Brenda A; Carter, Ernest L; Russell, Cynthia

2016-01-01

The Pathways Community HUB Model provides a unique strategy to effectively supplement health care services with social services needed to overcome barriers for those most at risk of poor health outcomes. Pathways are standardized measurement tools used to define and track health and social issues from identification through to a measurable completion point. The HUB use Pathways to coordinate agencies and service providers in the community to eliminate the inefficiencies and duplication that exist among them. Experience with the Model has brought out the need for better information technology solutions to support implementation of the Pathways themselves through decision-support tools for care coordinators and other users to track activities and outcomes, and to facilitate reporting. Here we provide a basis for discussing recommendations for such a data infrastructure by developing a conceptual model that formalizes the Pathway concept underlying current implementations. The main contribution is a set of core recommendations as a framework for developing and implementing a data architecture to support implementation of the Pathways Community HUB Model. The objective is to present a tool for communities interested in adopting the Model to learn from and to adapt in their own development and implementation efforts. Experience with the Community Health Access Project (CHAP) data base system (the core implementation of the Model) has identified several issues and remedies that have been developed to address these issues. Based on analysis of issues and remedies, we present several key features for a data architecture meeting the just mentioned recommendations. Presentation of features is followed by a practical guide to their implementation allowing an organization to consider either tailoring off-the-shelf generic systems to meet the requirements or offerings that are specialized for community-based care coordination. Looking to future extensions, we discuss the

The deep-sea hub of the ANTARES neutrino telescope

Energy Technology Data Exchange (ETDEWEB)

Anghinolfi, M. [INFN Sezione di Genova, Via Dodecaneso 33, I-16146 Genova (Italy); Calzas, A. [Centre de Physique des Particules de Marseille (CNRS/IN2P3), Universite de la Mediterranee, 13288 Marseille (France); Dinkespiler, B. [Centre de Physique des Particules de Marseille (CNRS/IN2P3), Universite de la Mediterranee, 13288 Marseille (France); Cuneo, S. [INFN Laboratori Nazionali del Sud, Via S. Sofia 44, I-95123 Catania (Italy); Favard, S. [Centre de Physique des Particules de Marseille (CNRS/IN2P3), Universite de la Mediterranee, 13288 Marseille (France); Hallewell, G. [Centre de Physique des Particules de Marseille (CNRS/IN2P3), Universite de la Mediterranee, 13288 Marseille (France)]. E-mail: gregh@cppm.in2p3.fr; Jaquet, M. [Centre de Physique des Particules de Marseille (CNRS/IN2P3), Universite de la Mediterranee, 13288 Marseille (France); Musumeci, M. [INFN Laboratori Nazionali del Sud, Via S. Sofia 44, I-95123 Catania (Italy); Papaleo, R. [INFN Laboratori Nazionali del Sud, Via S. Sofia 44, I-95123 Catania (Italy); Raia, G. [INFN Laboratori Nazionali del Sud, Via S. Sofia 44, I-95123 Catania (Italy); Valdy, P. [IFREMER - Institut francais de recherche pour l' exploitation de la mer, Centre de La Seyne, 83500 La Seyne sur mer (France); Vernin, P. [DSM-DAPNIA, CEA SACLAY, 91191 Gif sur Yvette Cedex (France)

2006-11-15

The ANTARES neutrino telescope, currently under construction at 2500 m depth off the French Mediterranean coast, will contain 12 detection lines, powered and read out through a deep-sea junction box (JB) hub. Electrical energy from the shore station is distributed through a transformer with multiple secondary windings and a plugboard with 16 deep sea-mateable electro-optic connectors. Connections are made to the JB outputs using manned or remotely operated submersible vehicles. The triply redundant power management and slow control system is based on two identical AC-powered systems, communicating with the shore through 160 Mb/s fibre G-links and a third battery-powered system using a slower link. We describe the power and slow control systems of the underwater hub.

The deep-sea hub of the ANTARES neutrino telescope

International Nuclear Information System (INIS)

Anghinolfi, M.; Calzas, A.; Dinkespiler, B.; Cuneo, S.; Favard, S.; Hallewell, G.; Jaquet, M.; Musumeci, M.; Papaleo, R.; Raia, G.; Valdy, P.; Vernin, P.

2006-01-01

The ANTARES neutrino telescope, currently under construction at 2500 m depth off the French Mediterranean coast, will contain 12 detection lines, powered and read out through a deep-sea junction box (JB) hub. Electrical energy from the shore station is distributed through a transformer with multiple secondary windings and a plugboard with 16 deep sea-mateable electro-optic connectors. Connections are made to the JB outputs using manned or remotely operated submersible vehicles. The triply redundant power management and slow control system is based on two identical AC-powered systems, communicating with the shore through 160 Mb/s fibre G-links and a third battery-powered system using a slower link. We describe the power and slow control systems of the underwater hub

The application of design criteria for locating a hub configured supply chain for a restaurant cluster in the Stellenbosch area

Directory of Open Access Journals (Sweden)

Claudia B. Struwig

2013-06-01

Full Text Available Restaurants, in general, utilise numerous suppliers. Normally they deliver on different days in the week and at different times during the day, logistically not an optimum approach. Not only does the current practice cause frequent interruptions, but by segregating the food supply chain unnecessary traffic is generated. This article investigated the need for developing a third party supplier hub, the best positioning of that hub and the most economical routes to the customers. With the aim of providing non-franchised restaurants with the necessary leverage to become market leaders, the hub is planned to only service the restaurants within the vicinity of the Stellenbosch area. In such a hub-configured supply chain, the suppliers would be delivering to the proposed hub, from where once-off deliveries to all the restaurants may be made on days and/or times determined by them. In order to investigate the benefits of providing such a hub structure, a systematic implementation approach was used. The first step was to do market research in order to establish the need for such a hub. That is, the viability of the hub from a restaurant’s perspective was established. The next step entailed the investigation of the design criteria needed in determining a favourable hub location. Four possible hub locations were identified. The Clark and Wright’s savings algorithm was then used to determine the optimal hub location and the feasibility of the results was verified with the aid of a global positioning system (GPS device. The last steps followed involved the determination of an effective hub floor plan that may be utilised, possible products that can be supplied to the restaurants and the necessary assets needed to provide the hub’s service. Finally, by incorporating all these facets, a cost analysis was done to determine the hub’s profitability.

Analysis of Wheel Hub Motor Drive Application in Electric Vehicles

Directory of Open Access Journals (Sweden)

Sun Yuechao

2017-01-01

Full Text Available Based on the comparative analysis of the performance characteristics of centralized and distributed drive electric vehicles, we found that the wheel hub motor drive mode of the electric vehicles with distributed drive have compact structure, high utilization ratio of interior vehicle space, lower center of vehicle gravity, good driving stability, easy intelligent control and many other advantages, hence in line with the new requirements for the development of drive performance of electric vehicles, and distributed drive will be the ultimate mode of electric vehicles in the future.

Partner Country Series: Developing a Natural Gas Trading Hub in Asia

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-06-01

The trading of natural gas in the Asia-Pacific region is dominated by long-term contracts in which the price of gas is indexed to that of oil. As the price of gas between Asia and other parts of the world has widened in recent years, observers have raised serious doubts about the sustainability of this pricing model. In this report, the IEA shows what it would take to create a functional, regional natural-gas trading hub in which prices reflect the local supply and demand fundamentals. The report aims to provide stakeholders with insights on the changes that are required in the Asia-Pacific natural gas sector - both downstream and upstream - to allow a competitive natural gas price to emerge. Building on OECD Europe and OECD America experiences, this report sets out to assess perspectives for these changes in the Asia-Pacific natural gas markets. It identifies obstacles and opportunities for a competitive natural gas price in the Asian economies to emerge.

Cholesteric Liquid Crystal Based Reflex Color Reflective Displays

Science.gov (United States)

Khan, Asad

2012-02-01

Bistable color cholesteric liquid crystal displays are unique LCDs that exhibit high reflectivity, good contrast, extremely low power operation, and are amenable to versatile roll-to-roll manufacturing. The display technology, now branded as Reflex has been in commercialized products since 1996. It has been the subject of extensive research and development globally by a variety of parties in both academic and industrial settings. Today, the display technology is in volume production for applications such as dedicated eWriters (Boogie Board), full color electronic skins (eSkin), and displays for smart cards. The flexibility comes from polymerization induced phase separation using unique materials unparalleled in any other display technology. The blend of monomers, polymers, cross linkers, and other components along with nematic liquid crystals and chiral dopants is created and processed in such ways so as to enable highly efficient manufactrable displays using ultra thin plastic substrates -- often as thin as 50μm. Other significant aspects include full color by stacking or spatial separation, night vision capability, ultra high resolution, as well as active matrix capabilities. Of particular note is the stacking approach of Reflex based displays to show full color. This approach for reflective color displays is unique to this technology. Owing to high transparency in wavelength bands outside the selective reflection band, three primarily color layers can be stacked on top of each other and reflect without interfering with other layers. This highly surprising architecture enables the highest reflectivity of any other reflective electronic color display technology. The optics, architecture, electro-topics, and process techniques will be discussed. This presentation will focus on the physics of the core technology and color, it's evolution from rigid glass based displays to flexible displays, development of products from the paradigm shifting concepts to consumer

nanoHUB.org: Experiences and Challenges in Software Sustainability for a Large Scientific Community

Directory of Open Access Journals (Sweden)

Lynn Zentner

2014-07-01

Full Text Available The science gateway nanoHUB.org, funded by the National Science Foundation (NSF, serves a large scientific community dedicated to research and education in nanotechnology with community-contributed simulation codes as well as a vast repository of other materials such as recorded presentations, teaching materials, and workshops and courses. Nearly 330,000 users annually access over 4400 items of content on nanoHUB, including 343 simulation tools. Arguably the largest nanotechnology facility in the world, nanoHUB has led the way not only in providing open access to scientific code in the nanotechnology community, but also in lowering barriers to the use of that code, by providing a platform where developers are able to easily and quickly deploy code written in a variety of languages with user-friendly graphical user interfaces and where users can run the latest versions of codes transparently on the grid or other powerful resources without ever having to download or update code. Being a leader in open access code deployment provides nanoHUB with opportunities and challenges as it meets the current and future needs of its community. This paper discusses the experiences of nanoHUB in addressing and adapting to the changing landscape of scientific software in ways that best serve its community and meet the needs of the largest portion of its user base.

A protein interaction atlas for the nuclear receptors: properties and quality of a hub-based dimerisation network

Directory of Open Access Journals (Sweden)

De Graaf David

2007-07-01

Full Text Available Abstract Background The nuclear receptors are a large family of eukaryotic transcription factors that constitute major pharmacological targets. They exert their combinatorial control through homotypic heterodimerisation. Elucidation of this dimerisation network is vital in order to understand the complex dynamics and potential cross-talk involved. Results Phylogeny, protein-protein interactions, protein-DNA interactions and gene expression data have been integrated to provide a comprehensive and up-to-date description of the topology and properties of the nuclear receptor interaction network in humans. We discriminate between DNA-binding and non-DNA-binding dimers, and provide a comprehensive interaction map, that identifies potential cross-talk between the various pathways of nuclear receptors. Conclusion We infer that the topology of this network is hub-based, and much more connected than previously thought. The hub-based topology of the network and the wide tissue expression pattern of NRs create a highly competitive environment for the common heterodimerising partners. Furthermore, a significant number of negative feedback loops is present, with the hub protein SHP [NR0B2] playing a major role. We also compare the evolution, topology and properties of the nuclear receptor network with the hub-based dimerisation network of the bHLH transcription factors in order to identify both unique themes and ubiquitous properties in gene regulation. In terms of methodology, we conclude that such a comprehensive picture can only be assembled by semi-automated text-mining, manual curation and integration of data from various sources.

Assessing wave energy effects on biodiversity: the wave hub experience.

Science.gov (United States)

Witt, M J; Sheehan, E V; Bearhop, S; Broderick, A C; Conley, D C; Cotterell, S P; Crow, E; Grecian, W J; Halsband, C; Hodgson, D J; Hosegood, P; Inger, R; Miller, P I; Sims, D W; Thompson, R C; Vanstaen, K; Votier, S C; Attrill, M J; Godley, B J

2012-01-28

Marine renewable energy installations harnessing energy from wind, wave and tidal resources are likely to become a large part of the future energy mix worldwide. The potential to gather energy from waves has recently seen increasing interest, with pilot developments in several nations. Although technology to harness wave energy lags behind that of wind and tidal generation, it has the potential to contribute significantly to energy production. As wave energy technology matures and becomes more widespread, it is likely to result in further transformation of our coastal seas. Such changes are accompanied by uncertainty regarding their impacts on biodiversity. To date, impacts have not been assessed, as wave energy converters have yet to be fully developed. Therefore, there is a pressing need to build a framework of understanding regarding the potential impacts of these technologies, underpinned by methodologies that are transferable and scalable across sites to facilitate formal meta-analysis. We first review the potential positive and negative effects of wave energy generation, and then, with specific reference to our work at the Wave Hub (a wave energy test site in southwest England, UK), we set out the methodological approaches needed to assess possible effects of wave energy on biodiversity. We highlight the need for national and international research clusters to accelerate the implementation of wave energy, within a coherent understanding of potential effects-both positive and negative.

Googling Service Boundaries for Endovascular Clot Retrieval Hub Hospitals in a Metropolitan Setting: Proof-of-Concept Study.

Science.gov (United States)

Phan, Thanh G; Beare, Richard; Chen, Jian; Clissold, Benjamin; Ly, John; Singhal, Shaloo; Ma, Henry; Srikanth, Velandai

2017-05-01

There is great interest in how endovascular clot retrieval hubs provide services to a population. We applied a computational method to objectively generate service boundaries for such endovascular clot retrieval hubs, defined by traveling time to hub. Stroke incidence data merged with population census to estimate numbers of stroke in metropolitan Melbourne, Australia. Traveling time from randomly generated addresses to 4 endovascular clot retrieval-capable hubs (Royal Melbourne Hospital [RMH], Monash Medical Center [MMC], Alfred Hospital [ALF], and Austin Hospital [AUS]) estimated using Google Map application program interface. Boundary maps generated based on traveling time at various times of day for combinations of hubs. In a 2-hub model, catchment was best distributed when RMH was paired with MMC (model 1a, RMH 1765 km 2 and MMC 1164 km 2 ) or with AUS (model 1c, RMH 1244 km 2 and AUS 1685 km 2 ), with no statistical difference between models ( P =0.20). Catchment was poorly distributed when RMH was paired with ALF (model 1b, RMH 2252 km 2 and ALF 676 km 2 ), significantly different from both models 1a and 1c (both P AUS was superior to that of RMH, MMC, and ALF in catchment distribution and travel time. The method was also successfully applied to the city of Adelaide demonstrating wider applicability. We provide proof of concept for a novel computational method to objectively designate service boundaries for endovascular clot retrieval hubs. © 2017 American Heart Association, Inc.

Hub River: A private power prototype

International Nuclear Information System (INIS)

Sachs, J.L.

1992-01-01

This article examines the challenges of financing an independent power project in a developing country. The oil-fired plant is to be located on the Hub River in Baluchistan on the Arabian Sea coast. The topics of the article include a description of the team that put the project together, the financing plans, the risk in the face of political unrest and change of governments, and the beginning of construction of the project

"Blogging" about course concepts: using technology for reflective journaling in a communications class.

Science.gov (United States)

Bouldin, Alicia S; Holmes, Erin R; Fortenberry, Michael L

2006-08-15

Web log technology was applied to a reflective journaling exercise in a communication course during the second-professional year at the University of Mississippi School of Pharmacy, to encourage students to reflect on course concepts and apply them to the environment outside the classroom, and to assess their communication performance. Two Web log entries per week were required for full credit. Web logs were evaluated at three points during the term. At the end of the course, students evaluated the assignment using a 2-page survey instrument. The assignment contributed to student learning and increased awareness level for approximately 40% of the class. Students had few complaints about the logistics of the assignment. The Web log technology was a useful tool for reflective journaling in this communications course. Future versions of the assignment will benefit from student feedback from this initial experience.

Addressing congestion on single allocation hub-and-spoke networks

Directory of Open Access Journals (Sweden)

Ricardo Saraiva de Camargo

2012-12-01

Full Text Available When considering hub-and-spoke networks with single allocation, the absence of alternative routes makes this kind of systems specially vulnerable to congestion effects. In order to improve the design of such networks, congestion costs must be addressed. This article deploys two different techniques for addressing congestion on single allocation hub-and-spoke networks: the Generalized Benders Decomposition and the Outer Approximation method. Both methods are able to solve large scale instances. Computational experiments show how the adoption of advanced solution strategies, such as Pareto-optimal cut generation on the Master Problem branch-and-bound tree, may be decisive. They also demonstrate that the solution effort is not only associated with the size of the instances, but also with their combination of the installation and congestion costs.

Composing with New Technology: Teacher Reflections on Learning Digital Video

Science.gov (United States)

Bruce, David L.; Chiu, Ming Ming

2015-01-01

This study explores teachers' reflections on their learning to compose with new technologies in the context of teacher education and/or teacher professional development. English language arts (ELA) teachers (n = 240) in 15 courses learned to use digital video (DV), completed at least one DV group project, and responded to open-ended survey…

Development of passive-controlled HUB (teetered brake & damper mechanism) of horizontal axis wind turbine

Energy Technology Data Exchange (ETDEWEB)

Shimizu, Yukimaru; Kamada, Yasunari; Maeda, Takao [Mie Univ. (Japan)

1997-12-31

For the purpose of the improvement of reliability of the Mega-Watt wind turbine, this paper indicates the development of an original mechanism for the passive-controlled hub, which has the effects of braking and damping on aerodynamic forces. This mechanism is useful for variable speed control of the large wind turbine. The passive-controlled hub is the combination of two mechanisms. One is the passive-teetered and damping mechanism, and the other is the passive-variable-pitch mechanism. These mechanism are carried out by the combination of the teetering and feathering motions. When the wind speed exceeds the rated wind speed, the blade is passively teetered in a downwind direction and, simultaneously, a feathering mechanism, which is linked to the teetering mechanism through a connecting rods, is activated. Testing of the model horizontal axis wind turbine in a wind tunnel showed that the passive-controlled hub mechanism can suppress the over-rotational speed of the rotor. By the application of the passive-controlled hub mechanism, the maximum rotor speed is reduced to about 60%.

Reflection as a Deliberative and Distributed Practice: Assessing Neuro-Enhancement Technologies via Mutual Learning Exercises (MLEs).

Science.gov (United States)

Zwart, Hub; Brenninkmeijer, Jonna; Eduard, Peter; Krabbenborg, Lotte; Laursen, Sheena; Revuelta, Gema; Toonders, Winnie

2017-01-01

In 1968, Jürgen Habermas claimed that, in an advanced technological society, the emancipatory force of knowledge can only be regained by actively recovering the 'forgotten experience of reflection'. In this article, we argue that, in the contemporary situation, critical reflection requires a deliberative ambiance, a process of mutual learning, a consciously organised process of deliberative and distributed reflection. And this especially applies, we argue, to critical reflection concerning a specific subset of technologies which are actually oriented towards optimising human cognition (neuro-enhancement). In order to create a deliberative ambiance, fostering critical upstream reflection on emerging technologies, we developed (in the context of a European 7 th Framework Programme project on neuro-enhancement and responsible research and innovation, called NERRI) the concept of a mutual learning exercise (MLE). Building on a number of case studies, we analyse what an MLE involves, both practically and conceptually, focussing on key aspects such as ambiance and expertise, the role of 'genres of the imagination' and the profiles of various 'subcultures of debate'. Ideally, an MLE becomes a contemporary version of the Socratic agora, providing a stage where multiple and sometimes unexpected voices and perspectives mutually challenge each other, in order to strength-en the societal robustness and responsiveness of emerg-ing technologies.

Gas and LNG pricing and trading hub in East Asia: An introduction

OpenAIRE

Shi, Xunpeng

2017-01-01

This paper summarizes the four papers in the special issues on ‘Gas and LNG pricing and trading hub in East Asia’. The papers examine lessons and experience from European hub development, other commodity, the Japanese history on developing of futures markets and inter-fuel substitution in East Asia. The papers finds that liquid futures market is the key to formulate benchmark prices while a well-developed spot market is the foundation; political will and strong leadership are required to over...

Development of Information Technology and Communication in Mexico: Reflections on Technology, Social and Organizational Man

Directory of Open Access Journals (Sweden)

Anahí Gallardo Velázquez

2012-11-01

Full Text Available Technology is a tool for everyday application,  which  allows men to accomplish the tasks for which it was designed as an efficient being, but if someone decides to discard it, that would be impossible, since we live in a society that punishes the technological illiterate. Mexico and Latin America participate with people and its organizations in the network, in the liquid life of the knowledge and information society. Mexico in particular, advances to important steps in the development of digital infrastructure, but it is not as important as the developed countries in this subject, in spite of its intention to be part of this global world of information and communication technologies. This survey is a reflection on the importance of Information and Communication Technology (ICT, in our country, from an organizational perspective, understanding by this,  a deeper search of the impact of technological development, specifically ICT, in the human being.

FEM analysis of hollow hub forming in rolling extrusion process

Directory of Open Access Journals (Sweden)

J. Bartnicki

2014-10-01

Full Text Available In this paper are presented the results of numerical calculations of rolling extrusion process of a hollow hub. As the flanges manufacturing at both sides of the product is required, in the analyzed process of rolling extrusion, a rear bumper was implemented as additional tool limiting axial metal flow. Numerical calculations of the hub forming process were conducted basing on finite element method, applying software Deform3D and Simufact in conditions of three dimensional state of strain. The obtained satisfactory results show that it is possible to conduct the further research works of experimental character, with the application of a modernized aggregate for the rolling extrusion process PO-2.

Continuous Integration for Concurrent MOOSE Framework and Application Development on GitHub

Directory of Open Access Journals (Sweden)

Andrew E. Slaughter

2015-11-01

Full Text Available For the past several years, Idaho National Laboratory’s MOOSE framework team has employed modern software engineering techniques (continuous integration, joint application/framework source code repos- itories, automated regression testing, etc. in developing closed-source multiphysics simulation software (Gaston et al., 'Journal of Open Research Software' vol. 2, article e10, 2014. In March 2014, the MOOSE framework was released under an open source license on GitHub, significantly expanding and diversifying the pool of current active and potential future contributors on the project. Despite this recent growth, the same philosophy of concurrent framework and application development continues to guide the project’s development roadmap. Several specific practices, including techniques for managing multiple repositories, conducting automated regression testing, and implementing a cascading build process are discussed in this short paper. Special attention is given to describing the manner in which these practices naturally synergize with the GitHub API and GitHub-specific features such as issue tracking, Pull Requests, and project forks.

Reflections on the History of Science and Technology in Austria

International Nuclear Information System (INIS)

Broda, E.

1972-01-01

This text was written for a talk given by E. Broda in Vienna on the symposium “The future of Science a Technology” held within the framework of the Austrian National Day in Vienna in 1972 and it addresses amongst other Victor Weisskopf. The text is about reflections on the history of science and technology in Austria. (nowak)

Network performance, hub connectivity potential, and competitive position of primary airports in Asia/Pacific region

NARCIS (Netherlands)

Matsumoto, H.; Veldhuis, J.; de Wit, J.; Burghouwt, G.

2008-01-01

Recently, hub-and-spoke network configurations are more and more developed in the Asia/Pacific region. In this paper, it is argued that the measurement of network performance in hub-and-spoke systems should take into account the quantity and quality of both direct and indirect connections. The

Ultra-wideband high-efficiency reflective linear-to-circular polarization converter based on metasurface at terahertz frequencies.

Science.gov (United States)

Jiang, Yannan; Wang, Lei; Wang, Jiao; Akwuruoha, Charles Nwakanma; Cao, Weiping

2017-10-30

The polarization conversion of electromagnetic (EM) waves, especially linear-to-circular (LTC) polarization conversion, is of great significance in practical applications. In this study, we propose an ultra-wideband high-efficiency reflective LTC polarization converter based on a metasurface in the terahertz regime. It consists of periodic unit cells, each cell of which is formed by a double split resonant square ring, dielectric layer, and fully reflective gold mirror. In the frequency range of 0.60 - 1.41 THz, the magnitudes of the reflection coefficients reach approximately 0.7, and the phase difference between the two orthogonal electric field components of the reflected wave is close to 90° or -270°. The results indicate that the relative bandwidth reaches 80% and the efficiency is greater than 88%, thus, ultra-wideband high-efficiency LTC polarization conversion has been realized. Finally, the physical mechanism of the polarization conversion is revealed. This converter has potential applications in antenna design, EM measurement, and stealth technology.

Sharing environmental models: An Approach using GitHub repositories and Web Processing Services

Science.gov (United States)

Stasch, Christoph; Nuest, Daniel; Pross, Benjamin

2016-04-01

The GLUES (Global Assessment of Land Use Dynamics, Greenhouse Gas Emissions and Ecosystem Services) project established a spatial data infrastructure for scientific geospatial data and metadata (http://geoportal-glues.ufz.de), where different regional collaborative projects researching the impacts of climate and socio-economic changes on sustainable land management can share their underlying base scenarios and datasets. One goal of the project is to ease the sharing of computational models between institutions and to make them easily executable in Web-based infrastructures. In this work, we present such an approach for sharing computational models relying on GitHub repositories (http://github.com) and Web Processing Services. At first, model providers upload their model implementations to GitHub repositories in order to share them with others. The GitHub platform allows users to submit changes to the model code. The changes can be discussed and reviewed before merging them. However, while GitHub allows sharing and collaborating of model source code, it does not actually allow running these models, which requires efforts to transfer the implementation to a model execution framework. We thus have extended an existing implementation of the OGC Web Processing Service standard (http://www.opengeospatial.org/standards/wps), the 52°North Web Processing Service (http://52north.org/wps) platform to retrieve all model implementations from a git (http://git-scm.com) repository and add them to the collection of published geoprocesses. The current implementation is restricted to models implemented as R scripts using WPS4R annotations (Hinz et al.) and to Java algorithms using the 52°North WPS Java API. The models hence become executable through a standardized Web API by multiple clients such as desktop or browser GIS and modelling frameworks. If the model code is changed on the GitHub platform, the changes are retrieved by the service and the processes will be updated

GeoTrust Hub: A Platform For Sharing And Reproducing Geoscience Applications

Science.gov (United States)

Malik, T.; Tarboton, D. G.; Goodall, J. L.; Choi, E.; Bhatt, A.; Peckham, S. D.; Foster, I.; Ton That, D. H.; Essawy, B.; Yuan, Z.; Dash, P. K.; Fils, G.; Gan, T.; Fadugba, O. I.; Saxena, A.; Valentic, T. A.

2017-12-01

Recent requirements of scholarly communication emphasize the reproducibility of scientific claims. Text-based research papers are considered poor mediums to establish reproducibility. Papers must be accompanied by "research objects", aggregation of digital artifacts that together with the paper provide an authoritative record of a piece of research. We will present GeoTrust Hub (http://geotrusthub.org), a platform for creating, sharing, and reproducing reusable research objects. GeoTrust Hub provides tools for scientists to create `geounits'--reusable research objects. Geounits are self-contained, annotated, and versioned containers that describe and package computational experiments in an efficient and light-weight manner. Geounits can be shared on public repositories such as HydroShare and FigShare, and also using their respective APIs reproduced on provisioned clouds. The latter feature enables science applications to have a lifetime beyond sharing, wherein they can be independently verified and trust be established as they are repeatedly reused. Through research use cases from several geoscience laboratories across the United States, we will demonstrate how tools provided from GeoTrust Hub along with Hydroshare as its public repository for geounits is advancing the state of reproducible research in the geosciences. For each use case, we will address different computational reproducibility requirements. Our first use case will be an example of setup reproducibility which enables a scientist to set up and reproduce an output from a model with complex configuration and development environments. Our second use case will be an example of algorithm/data reproducibility, where in a shared data science model/dataset can be substituted with an alternate one to verify model output results, and finally an example of interactive reproducibility, in which an experiment is dependent on specific versions of data to produce the result. Toward this we will use software and data

Acute effects on pulmonary function in young healthy adults exposed to traffic-related air pollution in semi-closed transport hub in Beijing.

Science.gov (United States)

Huang, Jing; Deng, Furong; Wu, Shaowei; Zhao, Yan; Shima, Masayuki; Guo, Bin; Liu, Qichen; Guo, Xinbiao

2016-09-01

Transport hub is an important part of urban comprehensive transportation system. Traffic-related air pollution can reach high level because of difficulty of diffusion and increase of emission in transport hub. However, whether exposure in this semi-closed traffic micro-environment causes acute changes in pulmonary function of commuters still needs to be explored. Forty young healthy adults participated in this randomized, crossover study. Each participant underwent 2 h exposure in a designated transport hub and, on a separate occasion, in an appointed park. Personal exposures to fine particulate matter (PM 2.5 ), black carbon (BC) and carbon monoxide (CO) were measured. Forced expiratory volume in 1 s (FEV 1 ) and peak expiratory flow (PEF) were assessed pre-, during and post-exposure. Mixed linear models were used to analyze the pulmonary effects of traffic-related air pollutants. Participants had significantly higher exposures to PM 2.5 , BC and CO in the transport hub than in the park. Exposure in transport hub induced significant reductions in FEV 1 and PEF compared with the park during exposure 1 and 2 h. The reductions were significant associated with traffic-related air pollutants. For instance, per 10 μg/m 3 increment in PM 2.5 was associated with -0.15 % (95 % CI -0.28, -0.02 %) reduction in FEV 1 during exposure 2 h. However, effects became attenuate after 2 h exposure. Short-term exposure in transport hub had acute reduction effects on pulmonary function. More attention should be paid to the health effects of exposure in the semi-closed traffic micro-environment.

Stochastic optimization of energy hub operation with consideration of thermal energy market and demand response

International Nuclear Information System (INIS)

Vahid-Pakdel, M.J.; Nojavan, Sayyad; Mohammadi-ivatloo, B.; Zare, Kazem

2017-01-01

Highlights: • Studying heating market impact on energy hub operation considering price uncertainty. • Investigating impact of implementation of heat demand response on hub operation. • Presenting stochastic method to consider wind generation and prices uncertainties. - Abstract: Multi carrier energy systems or energy hubs has provided more flexibility for energy management systems. On the other hand, due to mutual impact of different energy carriers in energy hubs, energy management studies become more challengeable. The initial patterns of energy demands from grids point of view can be modified by optimal scheduling of energy hubs. In this work, optimal operation of multi carrier energy system has been studied in the presence of wind farm, electrical and thermal storage systems, electrical and thermal demand response programs, electricity market and thermal energy market. Stochastic programming is implemented for modeling the system uncertainties such as demands, market prices and wind speed. It is shown that adding new source of heat energy for providing demand of consumers with market mechanism changes the optimal operation point of multi carrier energy system. Presented mixed integer linear formulation for the problem has been solved by executing CPLEX solver of GAMS optimization software. Simulation results shows that hub’s operation cost reduces up to 4.8% by enabling the option of using thermal energy market for meeting heat demand.

Penentuan Pelabuhan Hub untuk Crude Palm Oil (CPO Ekspor di Indonesia

Directory of Open Access Journals (Sweden)

Eko Andi Haranto

2013-03-01

Full Text Available CPO (Crude Palm Oil merupakan salah satu komoditi ekspor terbesar di Indonesia. Moda angkut darat dan sungai menjadi pilihan untuk didistribusikan menuju calon pelabuhan hub. Tugas Akhir ini bertujuan untuk merencanakan pola operasi armada pengangkut CPO, dan penentuan pelabuhan hub untuk ekspor CPO. Metode Transportasi digunakan untuk memilih pabrik pengolahan CPO sebagai pemasok utama. Dari hasil analisis didapatkan bahwa penggunaan moda darat menggunakan truk lebih optimal dibandingkan menggunakan tongkang hal ini dikarenakan kondisi sungai di Kalimantan Tengah yang dangkal. Dengan menggunakan metode transportasi didapatkan empat lokasi pabrik pengolahan minyak kelapa sawit. Pelabuhan hub yang terpilih berlokasi di Bagendang dan Bumi Harjo. Kedua titik tersebut dipilih karena sudah memiliki tangki timbun dan dermaga untuk ekspor CPO, selain itu pemilihan berdasarkan hasil analisa didapatkan biaya dari Pabrik PT. ATLANTIS ke Pelabuhan Bagendang dengan truk berukuran 10 ton memerlukan biaya sebesar Rp. 333.016,25/TRIP/TRUK. Pabrik PT. ATLANTIS II ke Pelabuhan Bagendang Rp. 237.868,75/TRIP/TRUK. Pabrik PT. TIGER ke Pelabuhan Bumi Harjo Rp. 475.737,50/TRIP/TRUK. PT. TIGER II merupakan pabrik yang dapat melakukan pengiriman langsung menggunakan tongkang berukuran 1800 DWT melewati sungai Barito, dengan biaya Rp.123.007.828,27,- /voyage.

Positioning Mbeya University of Science and Technology in Tanzania in the Systems of Innovation Perspective

OpenAIRE

Katambara, Zacharia

2014-01-01

The chronological development of universities ranges from the state at which universities are considered to be knowledge accumulators followed by knowledge factories and finally the knowledge hubs. The various national systems of innovations are aligned with the knowledge hubs and it involves substantial amount of research activities. The newly established Mbeya University of Science and Technology is recog- nised as a knowledge hub in some particular niches. However, there are a limited numb...

Analysis of Food Hub Commerce and Participation Using Agent-Based Modeling: Integrating Financial and Social Drivers.

Science.gov (United States)

Krejci, Caroline C; Stone, Richard T; Dorneich, Michael C; Gilbert, Stephen B

2016-02-01

Factors influencing long-term viability of an intermediated regional food supply network (food hub) were modeled using agent-based modeling techniques informed by interview data gathered from food hub participants. Previous analyses of food hub dynamics focused primarily on financial drivers rather than social factors and have not used mathematical models. Based on qualitative and quantitative data gathered from 22 customers and 11 vendors at a midwestern food hub, an agent-based model (ABM) was created with distinct consumer personas characterizing the range of consumer priorities. A comparison study determined if the ABM behaved differently than a model based on traditional economic assumptions. Further simulation studies assessed the effect of changes in parameters, such as producer reliability and the consumer profiles, on long-term food hub sustainability. The persona-based ABM model produced different and more resilient results than the more traditional way of modeling consumers. Reduced producer reliability significantly reduced trade; in some instances, a modest reduction in reliability threatened the sustainability of the system. Finally, a modest increase in price-driven consumers at the outset of the simulation quickly resulted in those consumers becoming a majority of the overall customer base. Results suggest that social factors, such as desire to support the community, can be more important than financial factors. An ABM of food hub dynamics, based on human factors data gathered from the field, can be a useful tool for policy decisions. Similar approaches can be used for modeling customer dynamics with other sustainable organizations. © 2015, Human Factors and Ergonomics Society.

DAVINC3I: moving towards responsive hub network designs

NARCIS (Netherlands)

Ossevoort, R.; Keizer, de M.; Vorst, van der J.G.A.J.; Wenink, E.

2013-01-01

The Dutch floricultural sector is generally appreciated for its world leadership; the Netherlands is the flower trading hub for the European market. There are two trends affecting this position. First, virtualisation makes trade flows relatively footloose and flexible. Moreover, it enables the use

DisasterHub: A mobile application for enabling crowd generated data fusion in Earth Observation disaster management services

Science.gov (United States)

Tsironis, Vassilis; Herekakis, Themistocles; Tsouni, Alexia; Kontoes, Charalampos Haris

2016-04-01

The rapid changes in climate over the last decades, together with the explosion of human population, have shaped the context for a fragile biosphere, prone to natural and manmade disasters that result in massive flows of environmental immigrants and great disturbances of ecosystems. The magnitude of the latest great disasters have shown evidence for high quality Earth Observation (EO) services as it regards disaster risk reduction and emergency support (DRR & EMS). The EO community runs ambitious initiatives in order to generate services with direct impact in the biosphere, and intends to stimulate the wider participation of citizens, enabling the Openness effect through the Open Innovation paradigm. This by its turn results in the tremendous growth of open source software technologies associated with web, social media, mobile and Crowdsourcing. The Institute for Astronomy, Astrophysics, Space Applications and Remote Sensing of National Observatory of Athens has developed, in the framework of the BEYOND Centre of Excellence for EO-based monitoring of Natural Disasters (http://www.beyond-eocenter.eu), a rich ecosystem of Copernicus compliant services addressing diverse hazardous phenomena caused from climate and weather extremes (fires, floods, windstorms, heat waves), atmospheric disturbances (smoke, dust, ozone, UV), and geo-hazards (earthquakes, landslides, volcanoes). Several services are delivered in near-real time to the public and the institutional authorities at national and regional level in southeastern Europe. Specific ones have been recognized worldwide for their innovation and operational aspects (e.g. FIREHUB was awarded the first prize as Best Service Challenge in the Copernicus Masters Competition, 2014). However, a communication gap still exists between the BEYOND ecosystem and those directly concerned by the natural disasters, the citizens and emergency response managers. This disruption of information flow between interested parties is addressed

Real-Time Monitoring and Fault Diagnosis of a Low Power Hub Motor Using Feedforward Neural Network

Directory of Open Access Journals (Sweden)

Mehmet Şimşir

2016-01-01

Full Text Available Low power hub motors are widely used in electromechanical systems such as electrical bicycles and solar vehicles due to their robustness and compact structure. Such systems driven by hub motors (in wheel motors encounter previously defined and undefined faults under operation. It may inevitably lead to the interruption of the electromechanical system operation; hence, economic losses take place at certain times. Therefore, in order to maintain system operation sustainability, the motor should be precisely monitored and the faults are diagnosed considering various significant motor parameters. In this study, the artificial feedforward backpropagation neural network approach is proposed to real-time monitor and diagnose the faults of the hub motor by measuring seven main system parameters. So as to construct a necessary model, we trained the model, using a data set consisting of 4160 samples where each has 7 parameters, by the MATLAB environment until the best model is obtained. The results are encouraging and meaningful for the specific motor and the developed model may be applicable to other types of hub motors. The prosperous model of the whole system was embedded into Arduino Due microcontroller card and the mobile real-time monitoring and fault diagnosis system prototype for hub motor was designed and manufactured.

The influence of hubs in the structure of a neuronal network during an epileptic seizure

Science.gov (United States)

Rodrigues, Abner Cardoso; Cerdeira, Hilda A.; Machado, Birajara Soares

2016-02-01

In this work, we propose changes in the structure of a neuronal network with the intention to provoke strong synchronization to simulate episodes of epileptic seizure. Starting with a network of Izhikevich neurons we slowly increase the number of connections in selected nodes in a controlled way, to produce (or not) hubs. We study how these structures alter the synchronization on the spike firings interval, on individual neurons as well as on mean values, as a function of the concentration of connections for random and non-random (hubs) distribution. We also analyze how the post-ictal signal varies for the different distributions. We conclude that a network with hubs is more appropriate to represent an epileptic state.

A review of Kuala Lumpur International Airport (KLIA) as a competitive South-East Asia hub

Science.gov (United States)

Bardai, A. M.; Er, A. Z.; Johari, M. K.; Noor, A. A. Mohd

2017-12-01

This paper is aimed to determine the strengths and weaknesses of Kuala Lumpur International Airport (KUL) against its competitors in Southeast Asia countries. Due to the geographical and market relevance issues, several airport hubs around KUL are chosen for comparison: Changi International Airport (SIN), Suvarnabhumi International Airport (BKK) and Soekarno-Hatta International Airport (CGK). Strengths, weaknesses, opportunities and threats (SWOT) analysis is used to evaluate the comparative situation between the airports in relation to changing industry and market environment. The study discovers some competitive edges for KUL. Nonetheless, the airport still has to be improved to face future challenges and it is under imminent threat of new aircraft technology.

Burden of disease, research funding and innovation in the UK: Do new health technologies reflect research inputs and need?

Science.gov (United States)

Ward, Derek; Martino, Orsolina; Packer, Claire; Simpson, Sue; Stevens, Andrew

2013-04-01

New and emerging health technologies (innovation outputs) do not always reflect conditions representing the greatest disease burden. We examine the role of research and development (R&D) funding in this relationship, considering whether areas with fewer innovative outputs receive an appropriate share of funding relative to their disease burden. We report a retrospective observational study, comparing burden of disease with R&D funding and innovation output. UK disability-adjusted life years (DALYs) and deaths came from the World Health Organization (WHO) 2004 Global Burden of Disease estimates; funding estimates from the UK Clinical Research Collaboration's 2006 Health Research Analysis; and innovation output was estimated by the number of new and emerging technologies reported by the National Institute for Health Research (NIHR) Horizon Scanning Centre between 2000 and 2009. Disease areas representing the biggest burden were generally associated with the most funding and innovation output; cancer, neuropsychiatric conditions and cardiovascular disease together comprised approximately two-thirds of DALYs, funding and reported technologies. Compared with DALYs, funding and technologies were disproportionately high for cancer, and technologies alone were disproportionately high for musculoskeletal conditions and endocrine/metabolic diseases. Neuropsychiatric conditions had comparatively few technologies compared to both DALYs and funding. The relationship between DALYs and innovation output appeared to be mediated by R&D funding. The relationship between burden of disease and new and emerging health technologies for different disease areas is partly dependent on the associated level of R&D funding (input). Discrepancies among key groups may reflect differential focus of research funding across disease areas. © The Author(s) 2013 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

High {Tc} superconductivity: Symmetries and reflections

International Nuclear Information System (INIS)

Zhang, S.C.

1999-01-01

This is a talk given at the Symposium Symmetries and Reflections, dedicated to Prof. C.N. Yang's retirement. In this talk, the author reflects on his personal interaction with Prof. Yang since his graduate career at SUNY Stony Brook, and his profound impact on his understanding of theoretical physics. He also reviews the SO(5) theory of high T c superconductivity and shows how his collaboration with Prof. Yang in 1990 lead to the foundation of this idea

Proceedings of the 2nd Workshop on Awareness and Reflection in Technology-Enhanced Learning

NARCIS (Netherlands)

Moore, Adam; Pammer, Viktoria; Pannese, Lucia; Prilla, Michael; Rajagopal, Kamakshi; Reinhardt, Wolfgang; Ullman, Thomas; Voigt, Christian

2013-01-01

Moore, A., Pammer, V., Pannese, L., Prilla, M., Rajagopal, K., Reinhardt, W., Ullman, Th. D., & Voigt, Ch. (Eds.) (2012). Proceedings of the 2nd Workshop on Awareness and Reflection in Technology Enhanced Learning. In conjunction with the 7th European Conference on Technology Enhanced Learning: 21st

High School Mathematics Teachers' Levels of Achieving Technology Integration and In-Class Reflections: The Case of Mathematica

Science.gov (United States)

Ardiç, Mehmet Alper; Isleyen, Tevfik

2017-01-01

The purpose of this study is to determine the levels of high school mathematics teachers in achieving mathematics instruction via computer algebra systems and the reflections of these practices in the classroom. Three high school mathematics teachers employed at different types of school participated in the study. In the beginning of this…

The FUTUREVOLC Supersite's e-Infrastructure - A multidisciplinary data hub and data service for Icelandic Volcanoes

Science.gov (United States)

Vogfjörd, Kristín S.; Sigmundsson, Freysteinn; Sverrisson, Sverrir Th.; Sigurdsson, Sigurdur F.; Ófeigsson, Benedikt G.; Arnarsson, Ólafur S.; Kristinsson, Ingvar; Ilyinskaya, Evgenia; Oddsdóttir, Thorarna Ýr; Bergsveinsson, Sölvi Th.; Hjartansson, Kristján R.

2014-05-01

structure of SeisComp will be used to store other time series data or point observations and either ArcLink or GSAC may be used to service the access to these data. However, the software development required for the overall construction of the FUTUREVOLC data hub and web service will be performed by two Icelandic software companies participating in the project. Once established, the goal is for the FUTUREVOLC data service to become a volcanological data node in EPOS (the European Plate Observing System), providing access to data and services on Icelandic volcanoes. Collaboration between FUTUREVOLC and the e-Infrastructure working group of EPOS (WG7) has already been initiated and the supersite hub will implement a CERIF metadata base (Common European Research Information Format), which has been chosen by EPOS to facilitate discovery and joint analysis of different datasets. Future developments in Nordic collaboration in meteorology may also lead to possible association of High Performance Computing with the data node.

Teacher Reflective Practice in Jesuit High Schools

Science.gov (United States)

Klug, Joseph H.

2010-01-01

Teachers who engage in reflective practice are more effective and may encourage higher student achievement. The purpose of this study is to explore and describe the methods that teachers use in order to engage in reflective practice. Further, it is essential to gain an understanding of how schools, including Jesuit high schools, promote reflective…

USDA Climate Hubs - delivering usable information and tools to farmers, ranchers and forest land managers - Communication insights from the Regions

Science.gov (United States)

Johnson, R.; Steele, R.

2016-12-01

The USDA Climate Hubs were established in 2014 to develop and deliver science-based, region-specific information and technologies, with USDA agencies and partners, to agricultural and natural resource managers to enable climate-informed decision-making. In the two and half years of existence, our regional leads have gained insights into communicating with the agricultural and forestry communities throughout the different regions of the country. Perspectives differ somewhat among regions and sectors. This talk will share those various insights.

The development of gas hubs in Europe

International Nuclear Information System (INIS)

Miriello, Caterina; Polo, Michele

2015-01-01

This paper investigates the development of wholesale markets for natural gas at the different stages of market liberalization. We identify three steps in the process: wholesale trade initially develops to cope with balancing needs when the shippers and suppliers segments become more fragmented; once the market becomes more liquid, it turns out to be a second source of gas procurement in alternative to long term contracts; finally, to manage price risk financial instruments are traded. We review in detail the different regulatory measures that must be introduced to create an efficient and functioning wholesale gas market. Finally, we analyze the evolution of gas hubs in the UK, the Netherlands, Germany and Italy in terms of market rules and market liquidity. We argue that each of these country cases can be easily located into the evolutionary path we have highlighted at the beginning, with the UK and the Netherlands leading the process, Germany and Italy constrained by limited supply; Italy is also showing an interesting counterfactual. -- Highlights: •The paper illustrates development paths for natural gas hubs in Europe. •Wholesale trade increases with competition. •The regulatory settings of UK, Netherlands, Germany and Italy are reviewed. •Each country is located into the evolutionary path highlighted in the analytical framework

A small-displacement sensor using total internal reflection theory and surface plasmon resonance technology for heterodyne interferometry.

Science.gov (United States)

Wang, Shinn-Fwu

2009-01-01

A small-displacement sensor based on total-internal reflection theory and surface plasmon resonance technology is proposed for use in heterodyne interferometry. A small displacement can be obtained simply by measuring the variation in phase difference between s- and p-polarization states with the small-displacement sensor. The theoretical displacement resolution of the small-displacement sensor can reach 0.45 nm. The sensor has some additional advantages, e.g., a simple optical setup, high resolution, high sensitivity and rapid measurement. Its feasibility is also demonstrated.

Optimal Scheduling of a Multi-Carrier Energy Hub Supplemented By Battery Energy Storage Systems

DEFF Research Database (Denmark)

Javadi, Mohammad Sadegh; Anvari-Moghaddam, Amjad; Guerrero, Josep M.

2017-01-01

This paper introduces a management model for optimal scheduling of a multi-carrier energy hub. In the proposed hub, three types of assets are considered: dispersed generating systems (DGs) such as micro-combined heat and power (mCHP) units, storage devices such as battery-based electrical storage...... systems (ESSs), and heating/cooling devices such as electrical heater, heat-pumps and absorption chillers. The optimal scheduling and management of the examined energy hub assets in line with electrical transactions with distribution network is modeled as a mixed-integer non-linear optimization problem....... In this regard, optimal operating points of DG units as well as ESSs are calculated based on a cost-effective strategy. Degradation cost of ESSs is also taken into consideration for short-term scheduling. Simulation results demonstrate that including well-planned energy storage options together with optimal...

“Blogging” About Course Concepts: Using Technology for Reflective Journaling in a Communications Class

Science.gov (United States)

Bouldin, Alicia S.; Holmes, Erin R.; Fortenberry, Michael L.

2006-01-01

Objective Web log technology was applied to a reflective journaling exercise in a communication course during the second-professional year at the University of Mississippi School of Pharmacy, to encourage students to reflect on course concepts and apply them to the environment outside the classroom, and to assess their communication performance. Design Two Web log entries per week were required for full credit. Web logs were evaluated at three points during the term. At the end of the course, students evaluated the assignment using a 2-page survey instrument. Assessment The assignment contributed to student learning and increased awareness level for approximately 40% of the class. Students had few complaints about the logistics of the assignment. Conclusion The Web log technology was a useful tool for reflective journaling in this communications course. Future versions of the assignment will benefit from student feedback from this initial experience. PMID:17136203

Impact of Tidal Level Variations on Wave Energy Absorption at Wave Hub

Directory of Open Access Journals (Sweden)

Valeria Castellucci

2016-10-01

Full Text Available The energy absorption of the wave energy converters (WEC characterized by a limited stroke length —like the point absorbers developed at Uppsala University—depends on the sea level variation at the deployment site. In coastal areas characterized by high tidal ranges, the daily energy production of the generators is not optimal. The study presented in this paper quantifies the effects of the changing sea level at the Wave Hub test site, located at the south-west coast of England. This area is strongly affected by tides: the tidal height calculated as the difference between the Mean High Water Spring and the Mean Low Water Spring in 2014 was about 6.6 m. The results are obtained from a hydro-mechanic model that analyzes the behaviour of the point absorber at the Wave Hub, taking into account the sea state occurrence scatter diagram and the tidal time series at the site. It turns out that the impact of the tide decreases the energy absorption by 53%. For this reason, the need for a tidal compensation system to be included in the design of the WEC becomes compelling. The economic advantages are evaluated for different scenarios: the economic analysis proposed within the paper allows an educated guess to be made on the profits. The alternative of extending the stroke length of the WEC is investigated, and the gain in energy absorption is estimated.

WHAT IS CONTROLLING THE FRAGMENTATION IN THE INFRARED DARK CLOUD G14.225–0.506?: DIFFERENT LEVELS OF FRAGMENTATION IN TWIN HUBS

Energy Technology Data Exchange (ETDEWEB)

Busquet, Gemma; Girart, Josep Miquel [Institut de Ciències de l’Espai (CSIC-IEEC), Campus UAB, Carrer de Can Magrans, S/N, E-08193, Cerdanyola del Vallès, Catalunya (Spain); Estalella, Robert [Departament d’Astronomia i Meteorologia, Institut de Ciències del Cosmos (ICC), Universitat de Barcelona (IEEC-UB), Martí i Franquès, 1, E-08028 Barcelona, Catalunya (Spain); Palau, Aina [Instituto de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, P.O. Box 3-72, 58090 Morelia, Michoacán, México (Mexico); Liu, Hauyu Baobab; Ho, Paul T. P. [Academia Sinica Institute of Astronomy and Astrophysics, Taipei, Taiwan (China); Zhang, Qizhou [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); De Gregorio-Monsalvo, Itziar [European Southern Observatory (ESO), Karl-Schwarzschild-Str. 2, D-85748 Garching (Germany); Pillai, Thushara [Max Planck Institut für Radioastronomie, Auf dem Hügel 69, D-53121 Bonn (Germany); Anglada, Guillem, E-mail: busquet@ice.cat [Instituto de Astrofísica de Andalucía, CSIC, Glorieta de la Astronomía, s/n, E-18008, Granada (Spain)

2016-03-20

We present observations of the 1.3 mm continuum emission toward hub-N and hub-S of the infrared dark cloud G14.225–0.506 carried out with the Submillimeter Array, together with observations of the dust emission at 870 and 350 μm obtained with APEX and CSO telescopes. The large-scale dust emission of both hubs consists of a single peaked clump elongated in the direction of the associated filament. At small scales, the SMA images reveal that both hubs fragment into several dust condensations. The fragmentation level was assessed under the same conditions and we found that hub-N presents 4 fragments while hub-S is more fragmented, with 13 fragments identified. We studied the density structure by means of a simultaneous fit of the radial intensity profile at 870 and 350 μm and the spectral energy distribution adopting a Plummer-like function to describe the density structure. The parameters inferred from the model are remarkably similar in both hubs, suggesting that density structure could not be responsible for determining the fragmentation level. We estimated several physical parameters, such as the level of turbulence and the magnetic field strength, and we found no significant differences between these hubs. The Jeans analysis indicates that the observed fragmentation is more consistent with thermal Jeans fragmentation compared with a scenario in which turbulent support is included. The lower fragmentation level observed in hub-N could be explained in terms of stronger UV radiation effects from a nearby H ii region, evolutionary effects, and/or stronger magnetic fields at small scales, a scenario that should be further investigated.

WHAT IS CONTROLLING THE FRAGMENTATION IN THE INFRARED DARK CLOUD G14.225–0.506?: DIFFERENT LEVELS OF FRAGMENTATION IN TWIN HUBS

International Nuclear Information System (INIS)

Busquet, Gemma; Girart, Josep Miquel; Estalella, Robert; Palau, Aina; Liu, Hauyu Baobab; Ho, Paul T. P.; Zhang, Qizhou; De Gregorio-Monsalvo, Itziar; Pillai, Thushara; Anglada, Guillem

2016-01-01

We present observations of the 1.3 mm continuum emission toward hub-N and hub-S of the infrared dark cloud G14.225–0.506 carried out with the Submillimeter Array, together with observations of the dust emission at 870 and 350 μm obtained with APEX and CSO telescopes. The large-scale dust emission of both hubs consists of a single peaked clump elongated in the direction of the associated filament. At small scales, the SMA images reveal that both hubs fragment into several dust condensations. The fragmentation level was assessed under the same conditions and we found that hub-N presents 4 fragments while hub-S is more fragmented, with 13 fragments identified. We studied the density structure by means of a simultaneous fit of the radial intensity profile at 870 and 350 μm and the spectral energy distribution adopting a Plummer-like function to describe the density structure. The parameters inferred from the model are remarkably similar in both hubs, suggesting that density structure could not be responsible for determining the fragmentation level. We estimated several physical parameters, such as the level of turbulence and the magnetic field strength, and we found no significant differences between these hubs. The Jeans analysis indicates that the observed fragmentation is more consistent with thermal Jeans fragmentation compared with a scenario in which turbulent support is included. The lower fragmentation level observed in hub-N could be explained in terms of stronger UV radiation effects from a nearby H ii region, evolutionary effects, and/or stronger magnetic fields at small scales, a scenario that should be further investigated

Hexcrete Tower for Harvesting Wind Energy at Taller Hub Heights - Budget Period 2

Energy Technology Data Exchange (ETDEWEB)

Sritharan, Sri [Iowa State Univ., Ames, IA (United States)

2017-05-01

Interest in designing taller towers for wind energy production in the United States (U.S.) has been steadily growing. In May 2015, it was revealed that taller towers will make wind energy production a reality in all 50 states, including some states that have nearly zero renewables in their energy portfolio. Facilitating wind energy production feasibility in all 50 states will no doubt contribute to increasing the electricity produced by wind from 4.5% in 2013 to a targeted scenario of 35% by 2050 in the Wind Vision report. This project focuses on the Hexcrete tower concept developed for tall towers using High Strength Concrete (HSC) and/or Ultra-High Performance Concrete (UHPC). Among other benefits, the Hexcrete concept overcomes transportation and logistical challenges, thus facilitating construction of towers with hub heights of 100-m (328-ft) and higher. The goal of this project is to facilitate widespread deployment of Hexcrete towers for harvesting wind energy at 120 to 140-m (394 to 459-ft) hub heights and reduce the Levelized Cost of Energy (LCOE) of wind energy production in the U.S. The technical scope of the project includes detailed design and optimization of at least three wind turbine towers using the Hexcrete concept together with experimental validation and LCOE analyses and development of a commercialization plan.

The East African Resilience Innovation Hub | CRDI - Centre de ...

International Development Research Centre (IDRC) Digital Library (Canada)

The hub will explore several research streams to examine why interventions succeed or fail, and how individuals, communities, and states can cope with and overcome conflict and violence. Researchers will also look at how to support peacemaking processes and increase disaster prevention efforts. Their work will respond ...

High-accuracy measurements of the normal specular reflectance

International Nuclear Information System (INIS)

Voarino, Philippe; Piombini, Herve; Sabary, Frederic; Marteau, Daniel; Dubard, Jimmy; Hameury, Jacques; Filtz, Jean Remy

2008-01-01

The French Laser Megajoule (LMJ) is designed and constructed by the French Commissariata l'Energie Atomique (CEA). Its amplifying section needs highly reflective multilayer mirrors for the flash lamps. To monitor and improve the coating process, the reflectors have to be characterized to high accuracy. The described spectrophotometer is designed to measure normal specular reflectance with high repeatability by using a small spot size of 100 μm. Results are compared with ellipsometric measurements. The instrument can also perform spatial characterization to detect coating nonuniformity

A Genome-Wide Association Study and Complex Network Identify Four Core Hub Genes in Bipolar Disorder

Directory of Open Access Journals (Sweden)

Zengyan Xie

2017-12-01

Full Text Available Bipolar disorder is a common and severe mental illness with unsolved pathophysiology. A genome-wide association study (GWAS has been used to find a number of risk genes, but it is difficult for a GWAS to find genes indirectly associated with a disease. To find core hub genes, we introduce a network analysis after the GWAS was conducted. Six thousand four hundred fifty eight single nucleotide polymorphisms (SNPs with p < 0.01 were sifted out from Wellcome Trust Case Control Consortium (WTCCC dataset and mapped to 2045 genes, which are then compared with the protein–protein network. One hundred twelve genes with a degree >17 were chosen as hub genes from which five significant modules and four core hub genes (FBXL13, WDFY2, bFGF, and MTHFD1L were found. These core hub genes have not been reported to be directly associated with BD but may function by interacting with genes directly related to BD. Our method engenders new thoughts on finding genes indirectly associated with, but important for, complex diseases.

International environmental and occupational health: From individual scientists to networked science Hubs.

Science.gov (United States)

Rosenthal, Joshua; Jessup, Christine; Felknor, Sarah; Humble, Michael; Bader, Farah; Bridbord, Kenneth

2012-12-01

For the past 16 years, the International Training and Research in Environmental and Occupational Health program (ITREOH) has supported projects that link U.S. academic scientists with scientists from low- and middle-income countries in diverse research and research training activities. Twenty-two projects of varied duration have conducted training to enhance the research capabilities of scientists at 75 institutions in 43 countries in Asia, Africa, Eastern Europe, and Latin America, and have built productive research relationships between these scientists and their U.S. partners. ITREOH investigators and their trainees have produced publications that have advanced basic sciences, developed methods, informed policy outcomes, and built institutional capacity. Today, the changing nature of the health sciences calls for a more strategic approach. Data-rich team science requires greater capacity for information technology and knowledge synthesis at the local institution. More robust systems for ethical review and administrative support are necessary to advance population-based research. Sustainability of institutional research capability depends on linkages to multiple national and international partners. In this context, the Fogarty International Center, the National Institute of Environmental Sciences and the National Institute for Occupational Safety and Health, have reengineered the ITREOH program to support and catalyze a multi-national network of regional hubs for Global Environmental and Occupational Health Sciences (GEOHealth). We anticipate that these networked science hubs will build upon previous investments by the ITREOH program and will serve to advance locally and internationally important health science, train and attract first-class scientists, and provide critical evidence to guide policy discussions. Published in 2012. This article is a U.S. Government work and is in the public domain in the USA.

High gain durable anti-reflective coating

Energy Technology Data Exchange (ETDEWEB)

Maghsoodi, Sina; Brophy, Brenor L.; Colson, Thomas E.; Gonsalves, Peter R.; Abrams, Ze' ev R.

2017-06-27

Disclosed herein are polysilsesquioxane-based anti-reflective coating (ARC) compositions, methods of preparation, and methods of deposition on a substrate. In one embodiment, the polysilsesquioxane of this disclosure is prepared in a two-step process of acid catalyzed hydrolysis of organoalkoxysilane followed by addition of tetralkoxysilane that generates silicone polymers with >40 mol % silanol based on Si-NMR. These high silanol siloxane polymers are stable and have a long shelf-life in polar organic solvents at room temperature. Also disclosed are low refractive index ARC made from these compositions with and without additives such as porogens, templates, thermal radical initiator, photo radical initiators, crosslinkers, Si--OH condensation catalyst and nano-fillers. Also disclosed are methods and apparatus for applying coatings to flat substrates including substrate pre-treatment processes, coating processes and coating curing processes including skin-curing using hot-air knives. Also disclosed are coating compositions and formulations for highly tunable, durable, highly abrasion-resistant functionalized anti-reflective coatings.

Nonlinear model of a rotating hub-beams structure: Equations of motion

Science.gov (United States)

Warminski, Jerzy

2018-01-01

Dynamics of a rotating structure composed of a rigid hub and flexible beams is presented in the paper. A nonlinear model of a beam takes into account bending, extension and nonlinear curvature. The influence of geometric nonlinearity and nonconstant angular velocity on dynamics of the rotating structure is presented. The exact equations of motion and associated boundary conditions are derived on the basis of the Hamilton's principle. The simplification of the exact nonlinear mathematical model is proposed taking into account the second order approximation. The reduced partial differential equations of motion together with associated boundary conditions can be used to study natural or forced vibrations of a rotating structure considering constant or nonconstant angular speed of a rigid hub and an arbitrary number of flexible blades.

Occurrence and Magnitude of High Reflectance Materials on the Moon

Science.gov (United States)

Nuno, R. G.; Boyd, A. K.; Robinson, M. S.

2013-12-01

We utilize a Lunar Reconnaissance Orbiter (LRO) Wide Angle Camera (WAC) 643 nm photometrically normalized (30°, 0°, 30°; i, e, g) reflectance map to investigate the occurrence and origin of high reflectance materials on the Moon. Compositional differences (mainly iron and titanium content) and maturity state (e.g. Copernican crater rays and swirls) are the predominant factors affecting reflectance variations observed on the Moon. Therefore, comparing reflectance values of different regions yields insight into the composition and relative exposure age of lunar materials. But an accurate comparison requires precise reflectance values normalized across every region being investigated. The WAC [1] obtains monthly near-global ground coverage, each month's observations acquired with different lighting conditions. Boyd et al. [2] utilized a geologically homogeneous subset [0°N to 90°N, 146°E to 148°E] of the WAC observations to determine an equation that describes how viewing and lighting angles affect reflectance values. A normalized global reflectance map was generated by applying the local empirical solution globally, with photometric angles derived from the WAC Global Lunar Digital Terrain Model (DTM)(GLD100) [3]. The GLD100 enables accurate correction of reflectance differences caused by local topographic undulations at the scale of 300 meters. We compare reflectance values across the Moon within 80°S to 80°N latitude. The features with the highest reflectance are steep crater walls within Copernican aged craters, such as the walls of Giordano Bruno, which have normalized reflectance values up to 0.35. Near-impact ejecta of some craters have high reflectance values, such as Virtanen (0.22). There are also broad relatively flat features with high reflectance, such as the 900-km Thales-Compton region (0.24) and the 600-km extent of Anaxagoras (Copernican age) ejecta (0.20). Since the interior of Anaxagoras contains occurrences of pure anorthosite [4], the high

Rising to the challenges-Reflections on Future-oriented Technology Analysis

OpenAIRE

Georghiou, Luke; Cassingena Harper, Jennifer

2013-01-01

Drawing upon the presentations made at the fourth conference on Future-oriented Technology Analysis, this essay reflects on the implications of the current period of instability and discontinuity for the practice of FTA or foresight. In the past the demand environment for foresight on research and innovation policy favoured application to priority-setting and articulation of demand. New tendencies include a heightened search for breakthrough science and a focus on grand societal challenges. B...

Physics and high technology

International Nuclear Information System (INIS)

Shao Liqin; Ma Junru.

1992-01-01

At present, the development of high technology has opened a new chapter in world's history of science and technology. This review describes the great impact of physics on high technology in six different fields (energy technology, new materials, information technology, biotechnology, space technology, and Ocean technology). It is shown that the new concepts and new methods created in physics and the special conditions and measurements established for physics researches not only deepen human's knowledge about nature but also point out new directions for engineering and technology. The achievements in physics have been more and more applied to high technology, while the development of high technology has explored some new research areas and raised many novel, important projects for physics. Therefore, it is important for us to strengthen the research on these major problems in physics

Spectral Analysis of the Wake behind a Helicopter Rotor Hub

Science.gov (United States)

Petrin, Christopher; Reich, David; Schmitz, Sven; Elbing, Brian

2016-11-01

A scaled model of a notional helicopter rotor hub was tested in the 48" Garfield Thomas Water Tunnel at the Applied Research Laboratory Penn State. LDV and PIV measurements in the far-wake consistently showed a six-per-revolution flow structure, in addition to stronger two- and four-per-revolution structures. These six-per-revolution structures persisted into the far-field, and have no direct geometric counterpart on the hub model. The current study will examine the Reynolds number dependence of these structures and present higher-order statistics of the turbulence within the wake. In addition, current activity using the EFPL Large Water Tunnel at Oklahoma State University will be presented. This effort uses a more canonical configuration to identify the source for these six-per-revolution structures, which are assumed to be a non-linear interaction between the two- and four-per-revolution structures.

Beta cell 5'-shifted isomiRs are candidate regulatory hubs in type 2 diabetes.

Directory of Open Access Journals (Sweden)

Jeanette Baran-Gale

Full Text Available Next-generation deep sequencing of small RNAs has unveiled the complexity of the microRNA (miRNA transcriptome, which is in large part due to the diversity of miRNA sequence variants ("isomiRs". Changes to a miRNA's seed sequence (nucleotides 2-8, including shifted start positions, can redirect targeting to a dramatically different set of RNAs and alter biological function. We performed deep sequencing of small RNA from mouse insulinoma (MIN6 cells (widely used as a surrogate for the study of pancreatic beta cells and developed a bioinformatic analysis pipeline to profile isomiR diversity. Additionally, we applied the pipeline to recently published small RNA-seq data from primary human beta cells and whole islets and compared the miRNA profiles with that of MIN6. We found that: (1 the miRNA expression profile in MIN6 cells is highly correlated with those of primary human beta cells and whole islets; (2 miRNA loci can generate multiple highly expressed isomiRs with different 5'-start positions (5'-isomiRs; (3 isomiRs with shifted start positions (5'-shifted isomiRs are highly expressed, and can be as abundant as their unshifted counterparts (5'-reference miRNAs. Finally, we identified 10 beta cell miRNA families as candidate regulatory hubs in a type 2 diabetes (T2D gene network. The most significant candidate hub was miR-29, which we demonstrated regulates the mRNA levels of several genes critical to beta cell function and implicated in T2D. Three of the candidate miRNA hubs were novel 5'-shifted isomiRs: miR-375+1, miR-375-1 and miR-183-5p+1. We showed by in silico target prediction and in vitro transfection studies that both miR-375+1 and miR-375-1 are likely to target an overlapping, but distinct suite of beta cell genes compared to canonical miR-375. In summary, this study characterizes the isomiR profile in beta cells for the first time, and also highlights the potential functional relevance of 5'-shifted isomiRs to T2D.

Maglev vehicles and superconductor technology: Integration of high-speed ground transportation into the air travel system

Energy Technology Data Exchange (ETDEWEB)

Johnson, L.R.; Rote, D.M.; Hull, J.R.; Coffey, H.T.; Daley, J.G.; Giese, R.F.

1989-04-01

This study was undertaken to (1) evaluate the potential contribution of high-temperature superconductors (HTSCs) to the technical and economic feasibility of magnetically levitated (maglev) vehicles, (2) determine the status of maglev transportation research in the United States and abroad, (3) identify the likelihood of a significant transportation market for high-speed maglev vehicles, and (4) provide a preliminary assessment of the potential energy and economic benefits of maglev systems. HTSCs should be considered as an enhancing, rather than an enabling, development for maglev transportation because they should improve reliability and reduce energy and maintenance costs. Superconducting maglev transportation technologies were developed in the United States in the late 1960s and early 1970s. Federal support was withdrawn in 1975, but major maglev transportation programs were continued in Japan and West Germany, where full-scale prototypes now carry passengers at speeds of 250 mi/h in demonstration runs. Maglev systems are generally viewed as very-high-speed train systems, but this study shows that the potential market for maglev technology as a train system, e.g., from one downtown to another, is limited. Rather, aircraft and maglev vehicles should be seen as complementing rather than competing transportation systems. If maglev systems were integrated into major hub airport operations, they could become economical in many relatively high-density US corridors. Air traffic congestion and associated noise and pollutant emissions around airports would also be reduced. 68 refs., 26 figs., 16 tabs.

Integrated technology rotor/flight research rotor concept definition study

Science.gov (United States)

Carlson, R. G.; Beno, E. A.; Ulisnik, H. D.

1983-01-01

As part of the Integrated Technology Rotor/Flight Research Rotor (ITR/FRR) Program a number of advanced rotor system designs were conceived and investigated. From these, several were chosen that best meet the started ITR goals with emphasis on stability, reduced weight and hub drag, simplicity, low head moment stiffness, and adequate strength and fatigue life. It was concluded that obtaining low hub moment stiffness was difficult when only the blade flexibility of bearingless rotor blades is considered, unacceptably low fatigue life being the primary problem. Achieving a moderate hub moment stiffness somewhat higher than state of the art articulated rotors in production today is possible within the fatigue life constraint. Alternatively, low stiffness is possible when additional rotor elements, besides the blades themselves, provide part of the rotor flexibility. Two primary designs evolved as best meeting the general ITR requirements that presently exist. An I shaped flexbeam with an external torque tube can satisfy the general goals but would have either higher stiffness or reduced fatigue life. The elastic gimbal rotor can achieve a better combination of low stiffness and high fatigue life but would be a somewhat heavier design and possibly exhibit a higher risk of aeromechanical instability.

Green technology foresight of products and materials - some reflections and results from an ongoing Danish project

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Pedersen, Thomas Thoning; Falch, Morten

2005-01-01

The article presents some methodological and theoretical reflections and some preliminary results from a Danish Green Technology Foresight project about environmental friendly products and materials, where the environmental potentials and risks from three technology areas are analysed: nano- bio...

Modelling energy demand for a fleet of hydrogen-electric vehicles interacting with a clean energy hub

International Nuclear Information System (INIS)

Syed, F.; Fowler, M.; Wan, D.; Maniyali, Y.

2009-01-01

This paper details the development of an energy demand model for a hydrogen-electric vehicle fleet and the modelling of the fleet interactions with a clean energy hub. The approach taken is to model the architecture and daily operation of every individual vehicle in the fleet. A generic architecture was developed based on understanding gained from existing detailed models used in vehicle powertrain design, with daily operation divided into two periods: charging and travelling. During the charging period, the vehicle charges its Electricity Storage System (ESS) and refills its Hydrogen Storage System (HSS), and during the travelling period, the vehicle depletes the ESS and HSS based on distance travelled. Daily travel distance is generated by a stochastic model and is considered an input to the fleet model. The modelling of a clean energy hub is also presented. The clean energy hub functions as an interface between electricity supply and the energy demand (i.e. hydrogen and electricity) of the vehicle fleet. Finally, a sample case is presented to demonstrate the use of the fleet model and its implications on clean energy hub sizing. (author)

Mammalian transcriptional hotspots are enriched for tissue specific enhancers near cell type specific highly expressed genes and are predicted to act as transcriptional activator hubs.

Science.gov (United States)

Joshi, Anagha

2014-12-30

Transcriptional hotspots are defined as genomic regions bound by multiple factors. They have been identified recently as cell type specific enhancers regulating developmentally essential genes in many species such as worm, fly and humans. The in-depth analysis of hotspots across multiple cell types in same species still remains to be explored and can bring new biological insights. We therefore collected 108 transcription-related factor (TF) ChIP sequencing data sets in ten murine cell types and classified the peaks in each cell type in three groups according to binding occupancy as singletons (low-occupancy), combinatorials (mid-occupancy) and hotspots (high-occupancy). The peaks in the three groups clustered largely according to the occupancy, suggesting priming of genomic loci for mid occupancy irrespective of cell type. We then characterized hotspots for diverse structural functional properties. The genes neighbouring hotspots had a small overlap with hotspot genes in other cell types and were highly enriched for cell type specific function. Hotspots were enriched for sequence motifs of key TFs in that cell type and more than 90% of hotspots were occupied by pioneering factors. Though we did not find any sequence signature in the three groups, the H3K4me1 binding profile had bimodal peaks at hotspots, distinguishing hotspots from mono-modal H3K4me1 singletons. In ES cells, differentially expressed genes after perturbation of activators were enriched for hotspot genes suggesting hotspots primarily act as transcriptional activator hubs. Finally, we proposed that ES hotspots might be under control of SetDB1 and not DNMT for silencing. Transcriptional hotspots are enriched for tissue specific enhancers near cell type specific highly expressed genes. In ES cells, they are predicted to act as transcriptional activator hubs and might be under SetDB1 control for silencing.

Replacement of Chromium Electroplating on C-2, E-2, P-3 and C-130 Propeller Hub Components Using HVOF Thermal Spray Coatings

National Research Council Canada - National Science Library

Sartwell, Bruce

2004-01-01

.... This document constitutes the final report on a project to qualify high-velocity oxygen-fuel (HVOF) thermal spray coatings as a replacement for hard chrome plating on propeller hub components from various military aircraft...

The roles of transportation and transportation hubs in the propagation of influenza and coronaviruses: a systematic review.

Science.gov (United States)

Browne, Annie; Ahmad, Sacha St-Onge; Beck, Charles R; Nguyen-Van-Tam, Jonathan S

2016-01-01

Respiratory viruses spread in humans across wide geographical areas in short periods of time, resulting in high levels of morbidity and mortality. We undertook a systematic review to assess the evidence that air, ground and sea mass transportation systems or hubs are associated with propagating influenza and coronaviruses. Healthcare databases and sources of grey literature were searched using pre-defined criteria between April and June 2014. Two reviewers screened all identified records against the protocol, undertook risk of bias assessments and extracted data using a piloted form. Results were analysed using a narrative synthesis. Forty-one studies met the eligibility criteria. Risk of bias was high in the observational studies, moderate to high in the reviews and moderate to low in the modelling studies. In-flight influenza transmission was identified substantively on five flights with up to four confirmed and six suspected secondary cases per affected flight. Five studies highlighted the role of air travel in accelerating influenza spread to new areas. Influenza outbreaks aboard cruise ships affect 2-7% of passengers. Influenza transmission events have been observed aboard ground transport vehicles. High heterogeneity between studies and the inability to exclude other sources of infection means that the risk of influenza transmission from an index case to other passengers cannot be accurately quantified. A paucity of evidence was identified describing severe acute respiratory syndrome coronavirus and Middle East respiratory syndrome coronavirus transmission events associated with transportation systems or hubs. Air transportation appears important in accelerating and amplifying influenza propagation. Transmission occurs aboard aeroplanes, at the destination and possibly at airports. Control measures to prevent influenza transmission on cruise ships are needed to reduce morbidity and mortality. There is no recent evidence of sea transport accelerating influenza

Dimensional consistency achieved in high-performance synchronizing hubs

Directory of Open Access Journals (Sweden)

García, P.

2013-02-01

Full Text Available The tolerances of parts produced for the automotive industry are so tight that any small process variation may mean that the product does not fulfill them. As dimensional tolerances decrease, the material properties of parts are expected to be improved. Depending on the dimensional and material requirements of a part, different production routes are available to find robust processes, minimizing cost and maximizing process capability. Dimensional tolerances have been reduced in recent years, and as a result, the double pressing-double sintering production via (“2P2S” has again become an accurate way to meet these increasingly narrow tolerances. In this paper, it is shown that the process parameters of the first sintering have great influence on the following production steps and the dimensions of the final parts. The roles of factors other than density and the second sintering process in defining the final dimensions of product are probed. All trials were done in a production line that produces synchronizer hubs for manual transmissions, allowing the maintenance of stable conditions and control of those parameters that are relevant for the product and process.

Las tolerancias en componentes fabricados para la industria del automóvil son tan estrechas que cualquier modificación en las variables del proceso puede provocar que no se cumplan. Una disminución de las tolerancias dimensionales, puede significar una mejora en las propiedades de las piezas. Dependiendo de los requerimientos dimensionales y del material, distintas rutas de procesado pueden seguirse para encontrar un método de procesado robusto, que minimice costes y maximice la capacidad del proceso. En los últimos años, la tolerancia dimensional se ha ajustado gracias a métodos de procesado como el doble prensado/doble sinterizado (“2P2S”, método de gran precisión para conseguir estrechas tolerancias. En este trabajo, se muestra que los parámetros de procesado

Public Transportation Hub Location with Stochastic Demand: An Improved Approach Based on Multiple Attribute Group Decision-Making

Directory of Open Access Journals (Sweden)

Sen Liu

2015-01-01

Full Text Available Urban public transportation hubs are the key nodes of the public transportation system. The location of such hubs is a combinatorial problem. Many factors can affect the decision-making of location, including both quantitative and qualitative factors; however, most current research focuses solely on either the quantitative or the qualitative factors. Little has been done to combine these two approaches. To fulfill this gap in the research, this paper proposes a novel approach to the public transportation hub location problem, which takes both quantitative and qualitative factors into account. In this paper, an improved multiple attribute group decision-making (MAGDM method based on TOPSIS (Technique for Order Preference by Similarity to Ideal Solution and deviation is proposed to convert the qualitative factors of each hub into quantitative evaluation values. A location model with stochastic passenger flows is then established based on the above evaluation values. Finally, stochastic programming theory is applied to solve the model and to determine the location result. A numerical study shows that this approach is applicable and effective.

High-precision reflectivity measurements: improvements in the calibration procedure

Science.gov (United States)

Jupe, Marco; Grossmann, Florian; Starke, Kai; Ristau, Detlev

2003-05-01

The development of high quality optical components is heavily depending on precise characterization procedures. The reflectance and transmittance of laser components are the most important parameters for advanced laser applications. In the industrial fabrication of optical coatings, quality management is generally insured by spectral photometric methods according to ISO/DIS 15386 on a medium level of accuracy. Especially for high reflecting mirrors, a severe discrepancy in the determination of the absolute reflectivity can be found for spectral photometric procedures. In the first part of the CHOCLAB project, a method for measuring reflectance and transmittance with an enhanced precision was developed, which is described in ISO/WD 13697. In the second part of the CHOCLAB project, the evaluation and optimization for the presented method is scheduled. Within this framework international Round-Robin experiment is currently in progress. During this Round-Robin experiment, distinct deviations could be observed between the results of high precision measurement facilities of different partners. Based on the extended experiments, the inhomogeneity of the sample reflectivity was identified as one important origin for the deviation. Consequently, this inhomogeneity is also influencing the calibration procedure. Therefore, a method was developed that allows the calibration of the chopper blade using always the same position on the reference mirror. During the investigations, the homogeneity of several samples was characterized by a surface mapping procedure for 1064 nm. The measurement facility was extended to the additional wavelength 532 nm and a similar set-up was assembled at 10.6 μm. The high precision reflectivity procedure at the mentioned wavelengths is demonstrated for exemplary measurements.

An Airlift Hub-and-Spoke Location-Routing Model with Time Windows: Case Study of the CONUS-to-Korea Airlift Problem

National Research Council Canada - National Science Library

Cox, David

1998-01-01

.... This study develops an alternative hub-and-spoke combined location-routing integer linear programming prototype model, and uses this model to determine what advantages a hub-and-spoke system offers...

Use of high-dimensional spectral data to evaluate organic matter, reflectance relationships in soils

Science.gov (United States)

Henderson, T. L.; Baumgardner, M. F.; Coster, D. C.; Franzmeier, D. P.; Stott, D. E.

1990-01-01

Recent breakthroughs in remote sensing technology have led to the development of a spaceborne high spectral resolution imaging sensor, HIRIS, to be launched in the mid-1990s for observation of earth surface features. The effects of organic carbon content on soil reflectance over the spectral range of HIRIS, and to examine the contributions of humic and fulvic acid fractions to soil reflectance was evaluated. Organic matter from four Indiana agricultural soils was extracted, fractionated, and purified, and six individual components of each soil were isolated and prepared for spectral analysis. The four soils, ranging in organic carbon content from 0.99 percent, represented various combinations of genetic parameters such as parent material, age, drainage, and native vegetation. An experimental procedure was developed to measure reflectance of very small soil and organic component samples in the laboratory, simulating the spectral coverage and resolution of the HIRIS sensor. Reflectance in 210 narrow (10 nm) bands was measured using the CARY 17D spectrophotometer over the 400 to 2500 nm wavelength range. Reflectance data were analyzed statistically to determine the regions of the reflective spectrum which provided useful information about soil organic matter content and composition. Wavebands providing significant information about soil organic carbon content were located in all three major regions of the reflective spectrum: visible, near infrared, and middle infrared. The purified humic acid fractions of the four soils were separable in six bands in the 1600 to 2400 nm range, suggesting that longwave middle infrared reflectance may be useful as a non-destructive laboratory technique for humic acid characterization.

Managing the cellular redox hub in photosynthetic organisms.

Science.gov (United States)

Foyer, Christine H; Noctor, Graham

2012-02-01

Light-driven redox chemistry is a powerful source of redox signals that has a decisive input into transcriptional control within the cell nucleus. Like photosynthetic electron transport pathways, the respiratory electron transport chain exerts a profound control over gene function, in order to balance energy (reductant and ATP) supply with demand, while preventing excessive over-reduction or over-oxidation that would be adversely affect metabolism. Photosynthetic and respiratory redox chemistries are not merely housekeeping processes but they exert a controlling influence over every aspect of plant biology, participating in the control of gene transcription and translation, post-translational modifications and the regulation of assimilatory reactions, assimilate partitioning and export. The number of processes influenced by redox controls and signals continues to increase as do the components that are recognized participants in the associated signalling pathways. A step change in our understanding of the overall importance of the cellular redox hub to plant cells has occurred in recent years as the complexity of the management of the cellular redox hub in relation to metabolic triggers and environmental cues has been elucidated. This special issue describes aspects of redox regulation and signalling at the cutting edge of current research in this dynamic and rapidly expanding field. © 2011 Blackwell Publishing Ltd.

Abnormal Intrinsic Functional Hubs in Severe Male Obstructive Sleep Apnea: Evidence from a Voxel-Wise Degree Centrality Analysis.

Science.gov (United States)

Li, Haijun; Li, Lan; Shao, Yi; Gong, Honghan; Zhang, Wei; Zeng, Xianjun; Ye, Chenglong; Nie, Si; Chen, Liting; Peng, Dechang

2016-01-01

Obstructive sleep apnea (OSA) has been associated with changes in brain structure and regional function in certain brain areas. However, the functional features of network organization in the whole brain remain largely uncertain. The purpose of this study was to identify the OSA-related spatial centrality distribution of the whole brain functional network and to investigate the potential altered intrinsic functional hubs. Forty male patients with newly confirmed severe OSA on polysomnography, and well-matched good sleepers, participated in this study. All participants underwent a resting-state functional MRI scan and clinical and cognitive evaluation. Voxel-wise degree centrality (DC) was measured across the whole brain, and group difference in DC was compared. The relationship between the abnormal DC value and clinical variables was assessed using a linear correlation analysis. Remarkably similar spatial distributions of the functional hubs (high DC) were found in both groups. However, OSA patients exhibited a pattern of significantly reduced regional DC in the left middle occipital gyrus, posterior cingulate cortex, left superior frontal gyrus, and bilateral inferior parietal lobule, and DC was increased in the right orbital frontal cortex, bilateral cerebellum posterior lobes, and bilateral lentiform nucleus, including the putamen, extending to the hippocampus, and the inferior temporal gyrus, which overlapped with the functional hubs. Furthermore, a linear correlation analysis revealed that the DC value in the posterior cingulate cortex and left superior frontal gyrus were positively correlated with Montreal cognitive assessment scores, The DC value in the left middle occipital gyrus and bilateral inferior parietal lobule were negatively correlated with apnea-hypopnea index and arousal index in OSA patients. Our findings suggest that OSA patients exhibited specific abnormal intrinsic functional hubs including relatively reduced and increased DC. This expands

A new transport hub

CERN Multimedia

Corinne Pralavorio

2016-01-01

CERN’s new Mobility Centre, allowing you to switch easily from one mode of transport to another, has just been officially opened.   Inauguration of the CERN Mobility Centre by Martin Steinacher, Director for Finance and Human Resources, and Lluis Miralles, Head of the SMB department. CERN’s new Mobility Centre, on the car park next to the Globe of Science and Innovation was officially opened on Tuesday, 22 March. The centre brings together all of CERN’s transport options in a single location. "Our aim is to create an intermodal hub where CERN users and personnel can switch from one mode of transport to another, and from CERN transport to public transport," explains Lluis Miralles, head of the Site Management and Buildings (SMB) department. The Mobility Centre incorporates the CERN bike and car rental services, the self-service car- and bike-sharing schemes, and SIXT car rental facilities (for long-distance journeys). It is located right ne...

Deconstructing Hub Drag. Part 2. Computational Development and Anaysis

Science.gov (United States)

2013-09-30

leveraged a Vertical Lift Consortium ( VLC )-funded hub drag scaling research effort. To confirm this objective, correlations are performed with the...Technology™ Demonstrator aircraft using an unstructured computational solver. These simpler faired elliptical geome- tries can prove to be challenging ...possible. However, additional funding was obtained from the Vertical Lift Consortium ( VLC ) to perform this study. This analysis is documented in

Human factors related to time-dependent infection control measures: "Scrub the hub" for venous catheters and feeding tubes.

Science.gov (United States)

Caspari, Lindsay; Epstein, Elizabeth; Blackman, Amy; Jin, Li; Kaufman, David A

2017-06-01

The use of catheter hub decontamination protocols is a common practice to reduce central line-associated bloodstream infections. However, few data exist on the most effective disinfection procedure prior to hub access accounting for human factors and time-dependent practices in real time in the clinical setting. An observational design with a multimodal intervention was used in this study in a neonatal intensive care unit. Direct observations on nurse compliance of scrub times with decontamination when accessing of venous catheter and feeding tube hubs were conducted during 3 phases: (1) baseline period prior to any interventions; (2) during an educational intervention phase; and (3) during a timer intervention period when using a timing device, either an actual timer or music button. Overall, both education and the timing device interventions increased the mean scrub time ± SD of venous catheter hubs. Mean baseline scrub times of 10 ± 5 seconds were lower compared with 23 ± 12 seconds after educational intervention (P music button use (P observed with scrub times of feeding tubes. Time-based infection control measures, such as scrubbing the hub, must be implemented with aids that qualify specific times to account for human factors, to ensure adherence to time-dependent measures aimed at decreasing nosocomial infections. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Environment as a home to architecture. The Cremona City Hub project

Directory of Open Access Journals (Sweden)

Emilio Faroldi

2014-10-01

Full Text Available The urban regeneration pro- ject of the former Marketplace area promoted by the Local Administration in Cremona through a two-step international contest which ended in May 2012, relies on the willingness to guarantee new and high standards of welcoming and liveability within a logic of “smart city” to be meant as an healthy, dynamic and economically sustainable city. The promotion of energy policies, the close connection between the urban and the architectural project, a new dimension of welcoming and residentiality, the environmental quality, and the fruition of culture, represent questions to which new project development capabilities intend to ensure adequate answers. The experimental research of the Cremona City Hub project targets these very values.

SHMF: Interest Prediction Model with Social Hub Matrix Factorization

Directory of Open Access Journals (Sweden)

Chaoyuan Cui

2017-01-01

Full Text Available With the development of social networks, microblog has become the major social communication tool. There is a lot of valuable information such as personal preference, public opinion, and marketing in microblog. Consequently, research on user interest prediction in microblog has a positive practical significance. In fact, how to extract information associated with user interest orientation from the constantly updated blog posts is not so easy. Existing prediction approaches based on probabilistic factor analysis use blog posts published by user to predict user interest. However, these methods are not very effective for the users who post less but browse more. In this paper, we propose a new prediction model, which is called SHMF, using social hub matrix factorization. SHMF constructs the interest prediction model by combining the information of blogs posts published by both user and direct neighbors in user’s social hub. Our proposed model predicts user interest by integrating user’s historical behavior and temporal factor as well as user’s friendships, thus achieving accurate forecasts of user’s future interests. The experimental results on Sina Weibo show the efficiency and effectiveness of our proposed model.

Frontiers of particle beam and high energy density plasma science using pulse power technology

International Nuclear Information System (INIS)

Masugata, Katsumi

2011-04-01

The papers presented at the symposium on “Frontiers of Particle Beam and High Energy Density Plasma Science using Pulse Power Technology” held in November 20-21, 2009 at National Institute for Fusion Science are collected. The papers reflect the present status and resent progress in the experiment and theoretical works on high power particle beams and high energy density plasmas produced by pulsed power technology. (author)

Fiscal 1997 report on the development of an energy use rationalization ultra-high tech liquid crystal technology. Project of development/promotion of ultra-high tech electronic technology / technology of design/control/analysis of new functional electronic materials; 1997 nendo kenkyu seika hokokusho energy shiyo gorika chosentan ekisho gijutsu kaihatsu. Chosentan denshi gijutsu kaihatsu sokushin jigyo / shinkino denshi zairyo sekkei seigyo bunseki gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

A research was conducted with the aim of developing an ultra-low power consuming type information display which supports the next next generation informatizing society. As to the function combined type fine structure formation technology, a formation technology of fine structure supporting multi-layer pixel by organic polymer materials was established to confirm a possibility of adopting it to high functional liquid crystal display. Concerning the high functional fine structure formation technology, a study was proceeded with on holographic PDLC which is an interference reflection coloring method. In relation to the low temperature film formation technology of ferroelectric thin films, a film formation device was introduced to obtain basic data, and at the same time a possibility was studied of improving film characteristics by laser annealing conducted after the film formation. Moreover, concerning the new functional material technology, studies were made of optical interference/high light-scattering control materials, light alignment elements, ultra-high purity/ultra-reliable optical materials, ultra-anisotropy optical materials, etc. About the light reflection characteristics control technology, studied were new liquid crystal molucular orientaion control technology, multi-dimensional anisotropy structure formation technology, etc. 100 refs., 273 figs., 58 tabs.

The WaterHub at Emory University: Campus Resiliency through Decentralized Reuse.

Science.gov (United States)

Allison, Daniel; Lohan, Eric; Baldwin, Tim

2018-02-01

  In the spring of 2015, Emory University in Atlanta, GA, commissioned an innovative campuswide water reclamation and reuse system known as the WaterHub®. Treating up to 400,000 gallons each day, the system can recycle the equivalent of two-thirds of the University's wastewater production and reduce the campus water footprint by up to 40 percent.One of the first district-scale water reuse systems in North America, the WaterHub mines wastewater from the campus sewer system and repurposes it for beneficial reuse on campus. In its first year of operation, the facility has treated more than 80 million gallons of campus wastewater and is expected to save millions of dollars in utility costs for the University over the next 20 years. The system represents a new age in commercial-scale water management in which onsite, urban water reclamation facilities may be a new norm.

Giant hub Src and Syk tyrosine kinase thermodynamic profiles recapitulate evolution

Science.gov (United States)

Phillips, J. C.

2017-10-01

Thermodynamic scaling theory, previously applied mainly to small proteins, here analyzes quantitative evolution of the titled functional network giant hub enzymes. The broad domain structure identified homologically is confirmed hydropathically using amino acid sequences only. The most surprising results concern the evolution of the tyrosine kinase globular surface roughness from avians to mammals, which is first order, compared to the evolution within mammals from rodents to humans, which is second order. The mystery of the unique amide terminal region of proto oncogene tyrosine protein kinase is resolved by the discovery there of a rare hydroneutral septad targeting cluster, which is paralleled by an equally rare octad catalytic cluster in tyrosine kinase in humans and a few other species (cat and dog). These results, which go far towards explaining why these proteins are among the largest giant hubs in protein interaction networks, use no adjustable parameters.

CER Hub: An informatics platform for conducting comparative effectiveness research using multi-institutional, heterogeneous, electronic clinical data.

Science.gov (United States)

Hazlehurst, Brian L; Kurtz, Stephen E; Masica, Andrew; Stevens, Victor J; McBurnie, Mary Ann; Puro, Jon E; Vijayadeva, Vinutha; Au, David H; Brannon, Elissa D; Sittig, Dean F

2015-10-01

Comparative effectiveness research (CER) requires the capture and analysis of data from disparate sources, often from a variety of institutions with diverse electronic health record (EHR) implementations. In this paper we describe the CER Hub, a web-based informatics platform for developing and conducting research studies that combine comprehensive electronic clinical data from multiple health care organizations. The CER Hub platform implements a data processing pipeline that employs informatics standards for data representation and web-based tools for developing study-specific data processing applications, providing standardized access to the patient-centric electronic health record (EHR) across organizations. The CER Hub is being used to conduct two CER studies utilizing data from six geographically distributed and demographically diverse health systems. These foundational studies address the effectiveness of medications for controlling asthma and the effectiveness of smoking cessation services delivered in primary care. The CER Hub includes four key capabilities: the ability to process and analyze both free-text and coded clinical data in the EHR; a data processing environment supported by distributed data and study governance processes; a clinical data-interchange format for facilitating standardized extraction of clinical data from EHRs; and a library of shareable clinical data processing applications. CER requires coordinated and scalable methods for extracting, aggregating, and analyzing complex, multi-institutional clinical data. By offering a range of informatics tools integrated into a framework for conducting studies using EHR data, the CER Hub provides a solution to the challenges of multi-institutional research using electronic medical record data. Copyright © 2015. Published by Elsevier Ireland Ltd.

Systems biology approach to transplant tolerance: proof of concept experiments using RNA interference (RNAi) to knock down hub genes in Jurkat and HeLa cells in vitro.

Science.gov (United States)

Lwin, Wint Wah; Park, Ken; Wauson, Matthew; Gao, Qin; Finn, Patricia W; Perkins, David; Khanna, Ajai

2012-07-01

Systems biology is gaining importance in studying complex systems such as the functional interconnections of human genes [1]. To investigate the molecular interactions involved in T cell immune responses, we used databases of physical gene-gene interactions to constructed molecular interaction networks (interconnections) with R language algorithms. This helped to identify highly interconnected "hub" genes AT(1)P5C1, IL6ST, PRKCZ, MYC, FOS, JUN, and MAPK1. We hypothesized that suppression of these hub genes in the gene network would result in significant phenotypic effects on T cells and examined this in vitro. The molecular interaction networks were then analyzed and visualized with Cytoscape. Jurkat and HeLa cells were transfected with siRNA for the selected hub genes. Cell proliferation was measured using ATP luminescence and BrdU labeling, which were measured 36, 72, and 96 h after activation. Following T cell stimulation, we found a significant decrease in ATP production (P cells. However, HeLa cells showed a significant (P cell proliferation when the genes MAPK1, IL6ST, ATP5C1, JUN, and FOS were knocked down. In both Jurkat and HeLa cells, targeted gene knockdown using siRNA showed decreased cell proliferation and ATP production in both Jurkat and HeLa cells. However, Jurkat T cells and HELA cells use different hub genes to regulate activation responses. This experiment provides proof of principle of applying siRNA knockdown of T cell hub genes to evaluate their proliferative capacity and ATP production. This novel concept outlines a systems biology approach to identify hub genes for targeted therapeutics. Published by Elsevier Inc.

Changed hub and corresponding functional connectivity of subgenual anterior cingulate cortex in major depressive disorder

Directory of Open Access Journals (Sweden)

Huawang Wu

2016-12-01

Full Text Available Major depressive disorder (MDD is one of the most prevalent mental disorders. In the brain, the hubs of the brain network play a key role in integrating and transferring information between different functional modules. However, whether the changed pattern in functional network hubs contributes to the onset of MDD remains unclear. Using resting-state functional magnetic resonance imaging and graph theory methods, we investigated whether alterations of hubs can be detected in MDD. First, we constructed the whole-brain voxel-wise functional networks and calculated a functional connectivity strength (FCS map in each subject in 34 MDD patients and 34 gender-, age-, and education level-matched healthy controls (HC. Next, the two-sample t-test was applied to compare the FCS maps between HC and MDD patients and identified significant decreased FCS in subgenual anterior cingulate cortex (sgACC in MDD patients. Subsequent functional connectivity analyses of sgACC showed disruptions in functional connectivity with posterior insula, middle and inferior temporal gyrus, lingual gyrus, and cerebellum in MDD patients. Furthermore, the changed FCS of sgACC and functional connections to sgACC were significantly correlated with the Hamilton Depression Rating Scale (HDRS scores in MDD patients. The results of the present study revealed the abnormal hub of sgACC and its corresponding disrupted frontal-limbic-visual cognitive-cerebellum functional networks in MDD. These findings may provide a new insight for the diagnosis and treatment of MDD.

From hub proteins to hub modules: the relationship between essentiality and centrality in the yeast interactome at different scales of organization.

Directory of Open Access Journals (Sweden)

Jimin Song

Full Text Available Numerous studies have suggested that hub proteins in the S. cerevisiae physical interaction network are more likely to be essential than other proteins. The proposed reasons underlying this observed relationship between topology and functioning have been subject to some controversy, with recent work suggesting that it arises due to the participation of hub proteins in essential complexes and processes. However, do these essential modules themselves have distinct network characteristics, and how do their essential proteins differ in their topological properties from their non-essential proteins? We aimed to advance our understanding of protein essentiality by analyzing proteins, complexes and processes within their broader functional context and by considering physical interactions both within and across complexes and biological processes. In agreement with the view that essentiality is a modular property, we found that the number of intracomplex or intraprocess interactions that a protein has is a better indicator of its essentiality than its overall number of interactions. Moreover, we found that within an essential complex, its essential proteins have on average more interactions, especially intracomplex interactions, than its non-essential proteins. Finally, we built a module-level interaction network and found that essential complexes and processes tend to have higher interaction degrees in this network than non-essential complexes and processes; that is, they exhibit a larger amount of functional cross-talk than their non-essential counterparts.

National Geothermal Data System Hub Deployment Timeline (Appendix E-1-d)

Energy Technology Data Exchange (ETDEWEB)

Caudill, Christy [Executive Office of the State of Arizona (Arizona Geological Survey)

2015-12-20

Excel spreadsheet describing activity, spending, and development for the four data hubs (Arizona Geoloical Survey, Kentucky Geological Survey, Illinois Geological Survey, and Nevada Bureau of Mines and Geology) serving data for the National Geothermal Data System under the State Contributions to the National Geothermal Data System Project.

Fleet deployment, network design and hub location of liner shipping companies

DEFF Research Database (Denmark)

Gelareh, Shahin; Pisinger, David

2011-01-01

A mixed integer linear programming formulation is proposed for the simultaneous design of network and fleet deployment of a deep-sea liner service provider. The underlying network design problem is based on a 4-index (5-index by considering capacity type) formulation of the hub location problem...

The Role of Art in Emotional-Moral Reflection on Risky and Controversial Technologies : the Case of BNCI

NARCIS (Netherlands)

Roeser, S.; Alfano, V.R.; Nevejan, Caroline

2018-01-01

In this article, we explore the role that art can play in ethical reflection on risky and controversial technologies. New technologies often give rise to societal controversies about their potential risks and benefits. Over the last decades, social scientists, psychologists, and philosophers have

Control networks and hubs.

Science.gov (United States)

Gratton, Caterina; Sun, Haoxin; Petersen, Steven E

2018-03-01

Executive control functions are associated with frontal, parietal, cingulate, and insular brain regions that interact through distributed large-scale networks. Here, we discuss how fMRI functional connectivity can shed light on the organization of control networks and how they interact with other parts of the brain. In the first section of our review, we present convergent evidence from fMRI functional connectivity, activation, and lesion studies that there are multiple dissociable control networks in the brain with distinct functional properties. In the second section, we discuss how graph theoretical concepts can help illuminate the mechanisms by which control networks interact with other brain regions to carry out goal-directed functions, focusing on the role of specialized hub regions for mediating cross-network interactions. Again, we use a combination of functional connectivity, lesion, and task activation studies to bolster this claim. We conclude that a large-scale network perspective provides important neurobiological constraints on the neural underpinnings of executive control, which will guide future basic and translational research into executive function and its disruption in disease. © 2017 Society for Psychophysiological Research.

Schools as Community Hubs: Policy Contexts, Educational Rationales, and Design Challenges

Science.gov (United States)

McShane, Ian; Watkins, Jerry; Meredyth, Denise

2012-01-01

There is increasing interest in making more effective use of schools as community hubs, both in Australia and internationally. Investment in shared facilities aims to engage parents and local communities in schooling, encourage civic participation, co-ordinate educational and community services and overcome disadvantages of location or service…

Simple method for measuring reflectance of optical coatings

International Nuclear Information System (INIS)

Wen Gui Wang; Yi Sheng Chen

1995-01-01

The quality of optical coatings has an important effect on the performance of optical instrument. The last few years, the requirements for super low loss dielectric mirror coatings used in low gain laser systems such as free electron laser and the ring laser etc., have given an impetus to the development of the technology of precise reflectance measurement of optical coatings. A reliable and workable technique is to measure the light intensity decay time of optical resonant cavity. This paper describes a measuring method which is dependent on direct measurement of the light intensity decay time of a resonant cavity comprised of low loss optical components. According to the evolution of a luminous flux stored inside the cavity, this method guarantees not only a quick and precise reflectance measurements of low loss highly reflecting mirror coatings but also transmittance measurements of low loss antireflection coatings and is especially effective with super los loss highly reflecting mirror. From the round-trip path length of the cavity and the speed of light, the light intensity exponential decay time of an optical cavity is easy to obtain and the cavity losses can be deduced. An optical reflectance of low loss highly mirror coatings and antireflection coatings is precisely measured as well. This is highly significant for the discrimination of the coating surface characteristics, the improvement of the performance of optical instrument and the development of high technology

Environmental and self-sufficiency assessment of the energy metabolism of tourist hubs on Mediterranean Islands: The case of Menorca (Spain)

International Nuclear Information System (INIS)

Sanyé-Mengual, Esther; Romanos, Héctor; Molina, Catalina; Oliver, M. Antònia; Ruiz, Núria; Pérez, Marta; Carreras, David; Boada, Martí; Garcia-Orellana, Jordi; Duch, Jordi; Rieradevall, Joan

2014-01-01

Energy performance of island tourism has been analyzed in the literature. However, tourist services tend to concentrate in tourist hubs, especially where mass tourism predominates (e.g., Mediterranean), and the energy metabolism of these systems has not yet been assessed. The present paper models and estimates the energy metabolism of tourist hubs in the Menorca Island (Spain) by integrating social, geographical and environmental methods. Mobility (both external and internal) and consumption of lodging services were characterized through surveys to users (tourists) and business managers. An environmental assessment evaluated CO 2 emissions, and energy self-sufficiency potential was estimated via GIS data. The results indicate that, on average, a tourist consumes 4756 MJ with associated emissions of 277 kg of CO 2 per stay (20 days on average). Of all the energy flows, external mobility contributes the most to total emissions (77%). For every day spent in a tourist hub, a tourist consumes between 29 MJ and 93 MJ in lodging services, consumption that could be 100% satisfied by photovoltaic systems, and these systems would result in positive effects for the island. Sustainable tourism management might focus on promoting environmentally friendly transportation, energy efficient practices, and environmental communication through ecolabeling. - Highlights: • We modeled the entire energy metabolism of tourist hubs in islands. • Results showed that a tourist in Menorca consumes from 4000 to 6000 MJ per trip. • External mobility (trip to the island) accounts for 77% of the total CO 2 emissions. • Photovoltaic systems could provide enough power to achieve self-sufficiency. • Tourists at hotel hubs have higher energy consumption than other types of hubs

Reflection measurement of waveguide-injected high-power microwave antennas.

Science.gov (United States)

Yuan, Chengwei; Peng, Shengren; Shu, Ting; Zhang, Qiang; Zhao, Xuelong

2015-12-01

A method for reflection measurements of High-power Microwave (HPM) antennas excited with overmoded waveguides is proposed and studied systemically. In theory, principle of the method is proposed and the data processing formulas are developed. In simulations, a horn antenna excited by a TE11 mode exciter is examined and its reflection is calculated by CST Microwave Studio and by the method proposed in this article, respectively. In experiments, reflection measurements of two HPM antennas are conducted, and the measured results are well consistent with the theoretical expectations.

A note on hierarchical hubbing for a generalization of the VPN problem

NARCIS (Netherlands)

N.K. Olver (Neil)

2014-01-01

htmlabstractRobust network design refers to a class of optimization problems that occur when designing networks to efficiently handle variable demands. The notion of "hierarchical hubbing" was introduced (in the narrow context of a specific robust network design question), by Olver and Shepherd

A note on hierarchical hubbing for a generalization of the VPN problem

NARCIS (Netherlands)

Olver, N.K.

2014-01-01

Robust network design refers to a class of optimization problems that occur when designing networks to efficiently handle variable demands. The notion of "hierarchical hubbing" was introduced (in the narrow context of a specific robust network design question), by Olver and Shepherd [2010].

Discrimination techniques employing both reflective and thermal multispectral signals. [for remote sensor technology

Science.gov (United States)

Malila, W. A.; Crane, R. B.; Richardson, W.

1973-01-01

Recent improvements in remote sensor technology carry implications for data processing. Multispectral line scanners now exist that can collect data simultaneously and in registration in multiple channels at both reflective and thermal (emissive) wavelengths. Progress in dealing with two resultant recognition processing problems is discussed: (1) More channels mean higher processing costs; to combat these costs, a new and faster procedure for selecting subsets of channels has been developed. (2) Differences between thermal and reflective characteristics influence recognition processing; to illustrate the magnitude of these differences, some explanatory calculations are presented. Also introduced, is a different way to process multispectral scanner data, namely, radiation balance mapping and related procedures. Techniques and potentials are discussed and examples presented.

Seismic-Reflection Technology Defines Potential Vertical Bypass in Hydrogeologic Confinement within Tertiary Carbonates of the Southeastern Florida Platform

Science.gov (United States)

Cunningham, K. J.; Walker, C.; Westcott, R. L.

2011-12-01

Continuous improvements in shallow-focused, high-resolution, marine seismic-reflection technology has provided the opportunity to evaluate geologic structures that breach confining units of the Floridan aquifer system within the southeastern Florida Platform. The Floridan aquifer system is comprised mostly of Tertiary platform carbonates. In southeastern Florida, hydrogeologic confinement is important to sustainable use of the Floridan aquifer system, where the saline lower part is used for injection of wastewater and the brackish upper part is an alternative source of drinking water. Between 2007 and 2011, approximately 275 km of 24- and 48-channel seismic-reflection profiles were acquired in canals of peninsular southeastern Florida, Biscayne Bay, present-day Florida shelf margin, and the deeply submerged Miami Terrace. Vertical to steeply dipping offsets in seismic reflections indicate faults, which range from Eocene to possible early Pliocene age. Most faults are associated with karst collapse structures; however, a few tectonic faults of early Miocene to early Pliocene age are present. The faults may serve as a pathway for vertical groundwater flow across relatively low-permeability carbonate strata that separate zones of regionally extensive high-permeability in the Floridan aquifer system. The faults may collectively produce a regional confinement bypass system. In early 2011, twenty seismic-reflection profiles were acquired near the Key Biscayne submarine sinkhole located on the seafloor of the Miami Terrace. Here the water depth is about 365 m. A steeply dipping (eastward) zone of mostly deteriorated quality of seismic-reflection data underlies the sinkhole. Correlation of coherent seismic reflections within and adjacent to the disturbed zone indicates a series of faults occur within the zone. It is hypothesized that upward movement of groundwater within the zone contributed to development of a hypogenic karst system and the resultant overlying sinkhole

Advanced technologies for encryption of satellite links

Science.gov (United States)

McMahan, Sherry S.

The use of encryption on satellite links is discussed. Advanced technology exists to provide transmission security for large earth station with data rates up to 50 megabits per second. One of the major concerns in the use of encryption equipment with very small aperture terminals (VSAT) is the key management issue and the related operational costs. The low cost requirement and the lack of physical protection of remote VSATs place severe constraints on the design of encryption equipment. Encryption may be accomplished by embedding a tamper proof encryption module into the baseband unit of each VSAT. VSAT networks are usually star networks where there is a single large earth station that serves as a hub and all satellite communications takes place between each VSAT and the hub earth station. The hub earth station has the secret master key of each VSAT. These master keys are used to downline load encrypted session keys to each VSAT. A more secure alternative is to use public key techniques where each embedded VSAT encryption module internally generates its own secret and public numbers. The secret number never leaves the module while the public number is sent to the hub at the time of initialization of the encryption module into the VSAT. Physical access control to encryption modules of VSAT systems can be implemented using passwords, smart cards or biometrics.

Angle-resolved reflection spectroscopy of high-quality PMMA opal crystal

Science.gov (United States)

Nemtsev, Ivan V.; Tambasov, Igor A.; Ivanenko, Alexander A.; Zyryanov, Victor Ya.

2018-02-01

PMMA opal crystal was prepared by a simple hybrid method, which includes sedimentation, meniscus formation and evaporation. We investigated three surfaces of this crystal by angle-resolved reflective light spectroscopy and SEM study. The angle-resolved reflective measurements were carried out in the 400-1100 nm range. We have determined the high-quality ordered surface of the crystal region. Narrow particle size distribution of the surface has been revealed. The average particle diameter obtained with SEM was nearly 361 nm. The most interesting result was that reflectivity of the surface turned out up to 98% at normal light incidence. Using a fit of dependences of the maximum reflectivity wavelength from an angle based on the Bragg-Snell law, the wavelength of maximum 0° reflectivity, the particle diameter and the fill factor have been determined. For the best surface maximum reflectivity wavelength of a 0° angle was estimated to be 869 nm. The particle diameter and fill factor were calculated as 372 nm and 0.8715, respectively. The diameter obtained by fitting is in excellent agreement with the particle diameter obtained with SEM. The reflectivity maximum is assumed to increase significantly when increasing the fill factor. We believe that using our simple approach to manufacture PMMA opal crystals will significantly increase the fabrication of high-quality photonic crystal templates and thin films.

Beyond the Gatekeeper State : African Infrastructure Hubs as Sites of Experimentation

NARCIS (Netherlands)

Hönke, Jana

2018-01-01

While Africa has often been portrayed as peripheral to major global economic flows, the copper mines in the South of the DRC as much as the port of Dar es Salaam are hubs of extraction and trade at the heart of the global economy. This article departs from the notion of the gatekeeper state that

Improving Healthcare in Pediatric Oncology: Development and Testing of Multiple Indicators to Evaluate a Hub-And-Spoke Model.

Science.gov (United States)

Zucchetti, Giulia; Bertorello, Nicoletta; Angelastro, Angela; Gianino, Paola; Bona, Gianni; Barbara, Affif; Besenzon, Luigi; Brach Del Prever, Adalberto; Pesce, Fernando; Nangeroni, Marco; Fagioli, Franca

2017-06-01

Purpose The hub-and-spoke is a new innovation model in healthcare that has been adopted in some countries to manage rare pathologies. We developed a set of indicators to assess current quality practices of the hub-and-spoke model adopted in the Interregional Pediatric Oncology Network in Northwest Italy and to promote patient, family, and professional healthcare empowerment. Methods Literature and evidence-based clinical guidelines were reviewed and multiprofessional team workshops were carried out to highlight some important issues on healthcare in pediatric oncology and to translate them into a set of multiple indicators. For each indicator, specific questions were formulated and tested through a series of questionnaires completed by 80 healthcare professionals and 50 pediatric patients and their parents. Results The results highlighted a positive perception of healthcare delivered by the hub-and-spoke model (M HP = 156, M Pat = 93, M Par = 104). Based on the participants' suggestions, some quality improvements have been implemented. Conclusions This study represents the first attempt to examine this new model of pediatric oncology care through the active involvement of patients, families, and healthcare professionals. Suggestions for adopting a hub-and-spoke model in pediatric oncology in other regions and countries are also highlighted.

Semi-automated high-efficiency reflectivity chamber for vacuum UV measurements

Science.gov (United States)

Wiley, James; Fleming, Brian; Renninger, Nicholas; Egan, Arika

2017-08-01

This paper presents the design and theory of operation for a semi-automated reflectivity chamber for ultraviolet optimized optics. A graphical user interface designed in LabVIEW controls the stages, interfaces with the detector system, takes semi-autonomous measurements, and monitors the system in case of error. Samples and an optical photodiode sit on an optics plate mounted to a rotation stage in the middle of the vacuum chamber. The optics plate rotates the samples and diode between an incident and reflected position to measure the absolute reflectivity of the samples at wavelengths limited by the monochromator operational bandpass of 70 nm to 550 nm. A collimating parabolic mirror on a fine steering tip-tilt motor enables beam steering for detector peak-ups. This chamber is designed to take measurements rapidly and with minimal oversight, increasing lab efficiency for high cadence and high accuracy vacuum UV reflectivity measurements.

Harnessing Multiple Internal Reflections to Design Highly Absorptive Acoustic Metasurfaces

Science.gov (United States)

Shen, Chen; Cummer, Steven A.

2018-05-01

The rapid development of metasurfaces has enabled numerous intriguing applications with acoustically thin sheets. Here we report the theory and experimental realization of a nonresonant sound-absorbing strategy using metasurfaces by harnessing multiple internal reflections. We theoretically and numerically show that the higher-order diffraction of thin gradient-index metasurfaces is tied to multiple internal reflections inside the unit cells. Highly absorbing acoustic metasurfaces can be realized by enforcing multiple internal reflections together with a small amount of loss. A reflective gradient-index acoustic metasurface is designed based on the theory, and we further experimentally verify the performance using a three-dimensional printed prototype. Measurements show over 99% energy absorption at the peak frequency and a 95% energy absorption bandwidth of around 600 Hz. The proposed mechanism provides an alternative route for sound absorption without the necessity of high absorption of the individual unit cells.

Multiperiod Hierarchical Location Problem of Transit Hub in Urban Agglomeration Area

Directory of Open Access Journals (Sweden)

Ting-ting Li

2017-01-01

Full Text Available With the rapid urbanization in developing countries, urban agglomeration area (UAA forms. Also, transportation demand in UAA grows rapidly and presents hierarchical feature. Therefore, it is imperative to develop models for transit hubs to guide the development of UAA and better meet the time-varying and hierarchical transportation demand. In this paper, the multiperiod hierarchical location problem of transit hub in urban agglomeration area (THUAA is studied. A hierarchical service network of THUAA with a multiflow, nested, and noncoherent structure is described. Then a multiperiod hierarchical mathematical programming model is proposed, aiming at minimizing the total demand weighted travel time. Moreover, an improved adaptive clonal selection algorithm is presented to solve the model. Both the model and algorithm are verified by the application to a real-life problem of Beijing-Tianjin-Hebei Region in China. The results of different scenarios in the case show that urban population migration has a great impact on the THUAA location scheme. Sustained and appropriate urban population migration helps to reduce travel time for urban residents.

High technology and civil rights

International Nuclear Information System (INIS)

Lerche, P.

1982-01-01

Court decision reflect the widely felt lack of clarity about the present legal situation in the field of high technology. This confusion is also due to the fact that this legal situation is surrounded by civil rights constellations, which have more and more eroded the contours of our legal system in recent years: Today, civil rights are no longer specific, well-definable bulwarks for the citizen, but are more and more frequently interpreted by the supreme courts as sources of procedural requirements with more or less certain often vague consequences. This shifting of the accent in civil rights towards procedural matters is due to an innate logical necessity, however: The same civil right considered in the same situation, e.g., in planning for high technology, may give rise to very different, even contradictory individual claims. Therefore, one of the main modern objectives of civil rights becoming more and more apparent is the need to reconcile conflicting positions, which makes civil rights a driving force in balancing interests in the easiest possible way. Yet, one of the main deficiencies in this rapidly growing procedural approach is the one-sidedness often to be found as a result of isolated, punctual actions. This misses the objective of achieving adequate harmonization. As examples of such one-sided, isolated civil rights approaches, legal opinions are cited on the so-called public participation (possibility to object for those concerned) in the licensing procedures under the German Atomic Energy Act and for protection against environmental impacts. Quity rightly, this participation of the public is interpreted as an advance protection of civil rights. However, its consequences quite often are exaggerated. (orig.) [de

Joint Optimization of Star P-hub Median Problem and Seat Inventory Control Decisions Considering a Hybrid Routing Transportation System

Directory of Open Access Journals (Sweden)

Hamid Tikani

2016-11-01

Full Text Available In this paper, we study the problem of integrated capacitated hub location problem and seat inventory control considering concept and techniques of revenue management. We consider an airline company maximizes its revenue by utilizing the best network topology and providing proper booking limits for all itineraries and fare classes. The transportation system arises in the form of a star/star network and includes both hub-stop and non-stop flights. This problem is formulated as a two-stage stochastic integer program with mixed-integer recourse. We solve various instances carried out from the Turkish network data set. Due to the NP-hardness of the problem, we propose a hybrid optimization method, consisting of an evolutionary algorithm based on genetic algorithm and exact solution. The quality of the solutions found by the proposed meta-heuristic is compared with the original version of GA and the mathematical programming model. The results obtained by the proposed model imply that integrating hub location and seat inventory control problem would help to increase the total revenue of airline companies. Also, in the case of serving non-stop flights, the model can provide more profit by employing less number of hubs.

Technological Aspects: High Voltage

CERN Document Server

Faircloth, D.C.

2013-12-16

This paper covers the theory and technological aspects of high-voltage design for ion sources. Electric field strengths are critical to understanding high-voltage breakdown. The equations governing electric fields and the techniques to solve them are discussed. The fundamental physics of high-voltage breakdown and electrical discharges are outlined. Different types of electrical discharges are catalogued and their behaviour in environments ranging from air to vacuum are detailed. The importance of surfaces is discussed. The principles of designing electrodes and insulators are introduced. The use of high-voltage platforms and their relation to system design are discussed. The use of commercially available high-voltage technology such as connectors, feedthroughs and cables are considered. Different power supply technologies and their procurement are briefly outlined. High-voltage safety, electric shocks and system design rules are covered.

The high resolution shear wave seismic reflection technique

International Nuclear Information System (INIS)

Johnson, W.J.; Clark, J.C.

1991-04-01

This report presents the state-of-the-art of the high resolution S-wave reflection technique. Published and unpublished literature has been reviewed and discussions have been held with experts. Result is to confirm that the proposed theoretical and practical basis for identifying aquifer systems using both P- and S-wave reflections is sound. Knowledge of S-wave velocity and P-wave velocity is a powerful tool for assessing the fluid characteristics of subsurface layers. Material properties and lateral changes in material properties such as change from clay to sand, can be inferred from careful dual evaluation of P and S-wave records. The high resolution S-wave reflection technique has seen its greatest application to date as part of geotechnical studies for building foundations in the Far East. Information from this type of study has been evaluated and will be incorporated in field studies. In particular, useful information regarding S-wave sources, noise suppression and recording procedures will be incorporated within the field studies. Case histories indicate that the best type of site for demonstrating the power of the high resolution S-wave technique will be in unconsolidated soil without excessive structural complexities. More complex sites can form the basis for subsequent research after the basic principles of the technique can be established under relatively uncomplicated conditions

Tapping Technology in Creating Product Development Studies: Reflections on an ESP-Business Project

Science.gov (United States)

Yeh, Aiden

2015-01-01

This paper describes a teacher's reflections on a technology-enhanced project-based learning approach to teaching an ESP-business lesson on product development, which is part of the curriculum for Conference English and Meetings Practice (CEMP), a business-track course for the Adult Continuing Education program at a private university in southern…

Idea Exchange Music Hub Hits the Right Note in Community

Directory of Open Access Journals (Sweden)

Greg Bester

2014-06-01

Full Text Available The Cambridge Libraries and Galleries has made many changes over the last two years, rebranding as Idea Exchange and adding 3D printers, creative spaces and many on-site events. This article focuses on one of the organization’s newest innovations, the addition of a Music Hub, and the challenges of creating a space where members can learn and collaborate musically without disturbing those around them.

Technological Aspects: High Voltage

International Nuclear Information System (INIS)

Faircloth, D C

2013-01-01

This paper covers the theory and technological aspects of high-voltage design for ion sources. Electric field strengths are critical to understanding high-voltage breakdown. The equations governing electric fields and the techniques to solve them are discussed. The fundamental physics of high-voltage breakdown and electrical discharges are outlined. Different types of electrical discharges are catalogued and their behaviour in environments ranging from air to vacuum are detailed. The importance of surfaces is discussed. The principles of designing electrodes and insulators are introduced. The use of high-voltage platforms and their relation to system design are discussed. The use of commercially available high-voltage technology such as connectors, feedthroughs and cables are considered. Different power supply technologies and their procurement are briefly outlined. High-voltage safety, electric shocks and system design rules are covered. (author)

Continuous integration in a social-coding world : empirical evidence from GitHub

NARCIS (Netherlands)

Vasilescu, B.N.; van Schuylenburg, S.B.; Wulms, Jules; Serebrenik, A.; Brand, van den M.G.J.

2014-01-01

Continuous integration is a software engineering practice of frequently merging all developer working copies with a shared main branch, e.g., several times a day. With the advent of GitHub, a platform well known for its "social coding" features that aid collaboration and sharing, and currently the

The Advancing Potential of Tutor Technologies in the Senior Students Training in the High School

Directory of Open Access Journals (Sweden)

Y. A. Lyakh

2013-01-01

Full Text Available The paper is devoted to the tutoring system in the modern high school. The system in question is based on the complex developmental educational technology of personalized teaching, aimed at identifying students’ educational motives and interests, and creating individual training programs and educational reflection. The important role is given to the tutor’s competence both in profile teaching and creating the comfortable communicative and stimulating educational environment. The author reveals the structural and functional implementation model of tutoring technologies, and observes its performance in the course of education quality monitoring of senior students in the profile high schools. The effectiveness of the personalized tutor technology system is demonstrated in three different aspects: the students’ education quality and communicative educational activity; development of tutors’ competence in monitoring the profile education quality; and students’ self-assessment and professional self-determination. The experimental research demonstrates that the implementation model of tutor technologies facilitates education quality improvement in the high school. 

Scaling Up Improved Legume Technologies in Tanzania (CIFSRF ...

International Development Research Centre (IDRC) Digital Library (Canada)

The project team will train at least 30 hub agro dealers on the technologies so they can instruct a larger number of smaller-scale agro dealers operating across the target regions. Research partners ... Addressing Africa's unmet need for family planning by intensifying sexual and reproductive and adolescent health research.

Fabrication of high-resolution reflective scale grating for an optical encoder using a patterned self-assembly process

International Nuclear Information System (INIS)

Fan, Shanjin; Jiang, Weitao; Li, Xuan; Yu, Haoyu; Lei, Biao; Shi, Yongsheng; Yin, Lei; Chen, Bangdao; Liu, Hongzhong

2016-01-01

Steel tape scale grating of a reflective incremental linear encoder has a key impact on the measurement accuracy of the optical encoder. However, it is difficult for conventional manufacturing processes to fabricate scale grating with high-resolution grating strips, due to process and material problems. In this paper, self-assembly technology was employed to fabricate high-resolution steel tape scale grating for a reflective incremental linear encoder. Graphene oxide nanoparticles were adopted to form anti-reflective grating strips of steel tape scale grating. They were deposited in the tape, which had a hydrophobic and hydrophilic grating pattern when the dispersion of the nanoparticles evaporated. A standard lift-off process was employed to fabricate the hydrophobic grating strips on the steel tape. Simultaneously, the steel tape itself presents a hydrophilic property. The hydrophobic and hydrophilic grating pattern was thus obtained. In this study, octafluorocyclobutane was used to prepare the hydrophobic grating strips, due to its hydrophobic property. High-resolution graphene oxide steel tape scale grating with a pitch of 20 μ m was obtained through the self-assembly process. The photoelectric signals of the optical encoder containing the graphene oxide scale grating and conventional scale grating were tested under the same conditions. Comparison test results showed that the graphene oxide scale grating has a better performance in its amplitude and harmonic components than that of the conventional steel tape scale. A comparison experiment of position errors was also conducted, demonstrating an improvement in the positioning error of the graphene oxide scale grating. The comparison results demonstrated the applicability of the proposed self-assembly process to fabricate high-resolution graphene oxide scale grating for a reflective incremental linear encoder. (paper)

Health promoting interactive technology: Finnish, Norwegian, Russian and Swedish students' reflections.

Science.gov (United States)

Kostenius, Catrine; Hertting, Krister

2016-09-01

The aim of this study was to elucidate Finnish, Norwegian, Russian and Swedish students' reflections and ideas on how interactive technology can be used to promote health in school. The data were collected in the northern part of these four countries, and 630 students aged 13-15 filled out the World Health Organization's 'Health Behavior in School-Aged Children' self-completion questionnaire with one additional open question, which is analyzed in this article (n = 419). The phenomenological analysis resulted in four themes: A sense of control, Balancing enjoyable options, Sharing with others and Learning made easier. The students point out that interactive technology promotes empowerment and independence, reduces stress and makes learning easier. They argue for a healthy balance of Internet use for it to be health promoting. According to the students, good relationships increase well-being; and interactive technology can offer a way to socialize, provide a tool for meeting and making new friends, help when not feeling well and give support when encouraging classmates. We argue, based on the findings of the present study and previous research, that students need a combination of freedom and meaningful relationships with adults who have an empowered child perspective, to fully take advantage of the empowering effects of interactive technology. We suggest, as implications for practice, that teachers, school leaders and health care professionals find ways to act as partners using an appreciative process, asking questions on what works well, to make interactive technology an enabling technology to increase health literacy, thus improving health and well-being in students. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A Futile Search for Values and Pedagogy? A Discursive Analysis of the Marketing Messages of Branch-Campuses in Higher Education Hubs

Science.gov (United States)

Karram, Grace

2014-01-01

Higher education has become a key strategy for the economic development of certain city-states that are positioning themselves as higher education hubs, recruiting both students and foreign providers. This article presents the findings of a research study that examined the online messages of foreign branch-campuses in education hubs (Dubai, Hong…

Comparison of the effectiveness of analytical wake models for wind farm with constant and variable hub heights

International Nuclear Information System (INIS)

Wang, Longyan; Tan, Andy C.C.; Cholette, Michael; Gu, Yuantong

2016-01-01

Highlights: • The effectiveness of three analytical wake models is studied. • The results of the analytical wake models are compared with the CFD simulations. • The results of CFD simulation are verified by comparison to the offshore wind farm observation data. • The onshore wind farm with both constant and different hub height turbines are analyzed. • PARK model is able to predict the total wind farm power production well with tuned surface roughness value. - Abstract: Extensive power losses of wind farm have been witnessed due to the wake interactions between wind turbines. By applying analytical wake models which describe the wind speed deficits in the wake quantitatively, the power losses can be regained to a large extent through wind farm layout optimization, and this has been extensively reported in literature. Nevertheless, the effectiveness of the analytical wake models in predicting the wind farm power production have rarely been studied and compared for wind farm with both constant and variable wind turbine hub heights. In this study, the effectiveness of three different analytical wake models (PARK model, Larsen model and B-P model) is thoroughly compared over a wide range of wake properties. After the validation with the observation data from offshore wind farm, CFD simulations are used to verify the effectiveness of the analytical wake models for an onshore wind farm. The results show that when using the PARK model the surface roughness value (z 0 ) must be carefully tuned to achieve good performance in predicting the wind farm power production. For the other two analytical wake models, their effectiveness varies depending on the situation of wind farm (offshore or onshore) and the wind turbine hub heights (constant or variable). It was found that the results of B-P model agree well with the CFD simulations for offshore wind farm, but not for the onshore wind farm. The Larsen model is more accurate for the wind farm with variable wind turbine

Abnormal functional connectivity of brain network hubs associated with symptom severity in treatment-naive patients with obsessive-compulsive disorder: A resting-state functional MRI study.

Science.gov (United States)

Tian, Lin; Meng, Chun; Jiang, Ying; Tang, Qunfeng; Wang, Shuai; Xie, Xiyao; Fu, Xiangshuai; Jin, Chunhui; Zhang, Fuquan; Wang, Jidong

2016-04-03

Abnormal brain networks have been observed in patients with obsessive-compulsive disorder (OCD). However, detailed network hub and connectivity changes remained unclear in treatment-naive patients with OCD. Here, we sought to determine whether patients show hub-related connectivity changes in their whole-brain functional networks. We used resting-state functional magnetic resonance imaging data and voxel-based graph-theoretic analysis to investigate functional connectivity strength and hubs of whole-brain networks in 29 treatment-naive patients with OCD and 29 age- and gender-matched healthy controls. Correlation analysis was applied for potential associations with OCD symptom severity. OCD selectively targeted brain regions of higher functional connectivity strength than the average including brain network hubs, mainly distributed in the cortico-striato-thalamo-cortical (CSTC) circuits and additionally parietal, occipital, temporal and cerebellar regions. Moreover, affected functional connectivity strength in the cerebellum, the medial orbitofrontal cortex and superior occipital cortex was significantly associated with global OCD symptom severity. Our results provide the evidence about OCD-related brain network hub changes, not only in the CSTC circuits but more distributed in whole brain networks. Data suggest that whole brain network hub analysis is useful for understanding the pathophysiology of OCD. Copyright © 2015 Elsevier Inc. All rights reserved.

The Mediterranean as a Hub of Maritime Trade and the Role of the New Suez Canal

Directory of Open Access Journals (Sweden)

Vittorio Amato

2017-06-01

Full Text Available Freight is a key variable of the economy, has a crucial role in the spatial relationships between different and distant markets and, to that extent, represents the physical medium by which exchanges of goods are realized, constituting the backbone of world trade. Throughout history, man has always sought methods by which speed up and simplify the connections between the many points of the globe both through the use of increasingly efficient technologies, and through the construction of new ways of access frequently changing physical morphology of territories. This process is still evolving, and in fact in 2015 there has been a new change that has affected one of the major hubs of the world: the Suez Canal. The Canal doubling is a strong signal of change as not only induces to reflect on current developments within the mode of transport, in particular the increasing race to the naval gigantism, but it also implies a newfound centrality of the Mediterranean Sea which, thanks to the new infrastructure, will increase its transit flows. This involves, on the one hand, an increase in business opportunities, and on the other, the formation of new hierarchies between the port systems of the countries that surround it. The underlying theme of the essay revolves around the recent trend of the modern shipping, and on variables that influenced the decision to double the channel. It will analyze the “New Suez Canal“ and its real capacity to attract more transit flows both in quantitative terms and in relation to the types of ships that can cross it and in relation to the origin of these flows. Finally the focus will be on port and logistics systems of the Mediterranean countries in order to understand which of them is more ready to seize any new opportunities involved.

Network Competition - the Coexistence of Hub-and-Spoke and Point-to-Point Systems

NARCIS (Netherlands)

Alderighi, M.; Cento, A.; Nijkamp, P.; Rietveld, P.

2005-01-01

The paper identifies conditions under which asymmetric equilibria may exist when carriers compete in designing their network configurations in a game-theoretical framework. Two carriers are assumed here, which are allowed to play three different strategies: Point-to-point (PP), hub-and-spoke (HS) or

Regionalizing healthcare: a vision for transforming Lebanon into a regional academic hub

Directory of Open Access Journals (Sweden)

Akl Elie A

2010-06-01

Full Text Available Abstract Background Lebanon suffers from a large scale emigration of physicians coupled with an oversaturation of the physician job market. Lebanon is currently witnessing an expansion of its medical education capacity with the establishment of new private medical schools, raising the fears of a worsening market oversaturation. Discussion The neighboring Arabian Gulf countries are suffering from a serious shortage of clinicians and academicians. In spite of their enormous investments in educational, clinical and research collaborative initiatives with some of the most renowned North American medical schools and institutions, their ability to recruit and retain highly qualified clinicians and academicians remains a major challenge. Lebanese universities have the opportunity to establish triangular collaborations with the Gulf regional medical centers and their North American partners. They could achieve this goal by tapping into the globalized and high quality Lebanese physician workforce and consequently regionalize healthcare delivery in the Middle East. Summary By recruiting its globalized and high quality physician workforce to establish collaborations with the Gulf regional, Lebanon could become a regional "academic hub".

Regionalizing healthcare: a vision for transforming Lebanon into a regional academic hub.

Science.gov (United States)

Badr, Kamal F; Akl, Elie A

2010-06-16

Lebanon suffers from a large scale emigration of physicians coupled with an oversaturation of the physician job market. Lebanon is currently witnessing an expansion of its medical education capacity with the establishment of new private medical schools, raising the fears of a worsening market oversaturation. The neighboring Arabian Gulf countries are suffering from a serious shortage of clinicians and academicians. In spite of their enormous investments in educational, clinical and research collaborative initiatives with some of the most renowned North American medical schools and institutions, their ability to recruit and retain highly qualified clinicians and academicians remains a major challenge. Lebanese universities have the opportunity to establish triangular collaborations with the Gulf regional medical centers and their North American partners. They could achieve this goal by tapping into the globalized and high quality Lebanese physician workforce and consequently regionalize healthcare delivery in the Middle East. By recruiting its globalized and high quality physician workforce to establish collaborations with the Gulf regional, Lebanon could become a regional "academic hub".

Reflective Course Design: An Interplay between Pedagogy and Technology in a Language Teacher Education Course

Science.gov (United States)

Firdyiwek, Yitna; Scida, Emily E.

2014-01-01

This study reports on a sequence of iterative redesigns of a graduate-level foreign language teacher education course. The study describes the interplay between technology and pedagogy that resulted in important curricular changes, from a focus on individual to social and then holistic reflection. Using a team-based design model, instructional…

HuB (elavl2 mRNA is restricted to the germ cells by post-transcriptional mechanisms including stabilisation of the message by DAZL.

Directory of Open Access Journals (Sweden)

Sophie E Wiszniak

Full Text Available The ability of germ cells to carry out a gene regulatory program distinct from the surrounding somatic tissue, and their capacity to specify an entire new organism has made them a focus of many studies that seek to understand how specific regulatory mechanisms, particularly post-transcriptional mechanisms, contribute to cell fate. In zebrafish, germ cells are specified through the inheritance of cytoplasmic determinants, termed the germ plasm, which contains a number of maternal mRNAs and proteins. Investigation of several of these messages has revealed that the restricted localisation of these mRNAs to the germ plasm and subsequent germ cells is due to cis-acting sequence elements present in their 3'UTRs. Here we show that a member of the Hu family of RNA-binding proteins, HuB, is maternally provided in the zebrafish embryo and exhibits germ cell specific expression during embryogenesis. Restriction of HuB mRNA to the germ cells is dependent on a number of sequence elements in its 3'UTR, which act to degrade the mRNA in the soma and stabilise it in the germ cells. In addition, we show that the germ cell specific RNA-binding protein DAZL is able to promote HuB mRNA stability and translation in germ cells, and further demonstrate that these activities require a 30 nucleotide element in the 3'UTR. Our study suggests that DAZL specifically binds the HuB 3'UTR and protects the message from degradation and/or enhances HuB translation, leading to the germ cell specific expression of HuB protein.

FY 1998 research result report. Ultra-high liquid crystal technology development for energy use rationalization (Technology of design/control/analysis of new functional electronic materials of the ultra-high electronic technology development promotion project); 1998 nendo kenkyu seika hokokusho. Energy shiyo gorika chosentan ekisho gijutsu kaihatsu (chosentan denshi gijutsu kaihatsu sokushin jigyo shinkino denshi zairyo sekkei seigyo bunseki nado gijutsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Element technology is studied to realize a reflective-type, full-color, and high-resolution liquid crystal display for super-low power consumption data display. As to the functional compound microstructure formation technology, a 4-inch panel was trially fabricated using two-layer guest-host liquid crystal technology to achieve the desired display performance by control of molecular orientation. Further, holographic PDLC elements were favorably test-fabricated. A ferroelectric PZT thin layer was formed by forming layer at low temperature at which a glass substrate can be used. Optical interference/optical dispersion type optical control materials were studied by liquid crystal/polymer composition. Also studied were super-pure/super-reliable liquid crystal compound/liquid crystal composite systems and super-anisotropic liquid crystal compound by modeling ionic impurities and liquid crystal molecular interaction. In relation to the control technology of optical reflection characteristics, effects of liquid crystal molecular structures (derivative effect and copolymer composition) on orientation were elucidated. As to the technology to form multi-dimensional anisotropic structures, efforts were made for the heightening of formation technology of simple RGB (red, green, blue) directional reflection layers using acrylate materials. The paper also outlined the comprehensive survey. (NEDO)

Of Hubs and Hinterlands: Cyprus as an Insular Space of Overlapping Diasporas

Directory of Open Access Journals (Sweden)

Russell King

2012-05-01

Full Text Available This paper uses the metaphor of diasporic hubs and hinterlands to document and analyse the various diasporic formations that overlap and encounter each other on the divided island of Cyprus. After a review of the various ways that islands interface with migration processes and some essential historical and statistical background on Cyprus and its population, the paper considers a number of migrations/diasporas that are based on or affect the island. They include the emigration from the diasporic hub of Cyprus during the 1950s-1970s; return migration, both of the original emigrants and their descendants; the British military/colonial settlement of Cyprus; retirees and ‘lifestyle migrants’; and various categories of recent immigrants, for whom Cyprus is a diasporic hinterland. We draw both similarities and differences between migratory dynamics in the northern, Turkish Cypriot part of the island and the southern, Greek Cypriot part. In the final part of the paper we describe recent fieldwork on various spaces of inter-diasporic encounter in Cyprus.

Determining Domestic Container Shipping as an Enforcement of Indonesian International Hub Port

Science.gov (United States)

Nur, H. I.; Lazuardi, S. D.; Hadi, F.; Hapis, M.

2018-03-01

According to Presidential Regulation Number 26 year of 2012 about the National Logistics System Development Blueprint, the Indonesian government proposed to build two international hub ports, which were in Port of Kuala Tanjung for the western region and Port of Bitung for eastern region. Therefore, the optimum routes and fleet size are required to support the enforcement of Indonesian International Hub Port. The optimization model is used to obtain the optimum route and fleet by minimizing the total shipping costs, while considering the container demand. The result of analysis obtained that the optimum route and fleet size for the western region of Indonesia were: (1) Kuala Tanjung-Belawan required 15 ships of 1,000 TEU; (2) Kuala Tanjung-Tanjung Priok required 73 ships of 2,500 TEU; (3) Kuala Tanjung- Tanjung Perak required 44 ships of 2,500 TEU. Meanwhile, the optimum route and fleet size for the eastern region of Indonesia consisted of: (1) Bitung-Sorong required 1 ship of 500 TEU; (2) Bitung-Banjarmasin required 3 ships of 500 TEU; and (3) Bitung-Makassar required 1 ship of 1,500 TEU.

High-Reflectivity Multi-Layer Coatings for the CLASP Sounding Rocket Project

Science.gov (United States)

Narukage, Noriyuki; Kano, Ryohei; Bando, Takamasa; Ishikawa, Ryoko; Kubo, Masahito; Katsukawa, Yukio; Ishikawa, Shin-nosuke; Kobiki, Toshihiko; Giono, Gabriel; Auchere, Frederic;

Progress of High Efficiency Centrifugal Compressor Simulations Using TURBO

Science.gov (United States)

Kulkarni, Sameer; Beach, Timothy A.

2017-01-01

Three-dimensional, time-accurate, and phase-lagged computational fluid dynamics (CFD) simulations of the High Efficiency Centrifugal Compressor (HECC) stage were generated using the TURBO solver. Changes to the TURBO Parallel Version 4 source code were made in order to properly model the no-slip boundary condition along the spinning hub region for centrifugal impellers. A startup procedure was developed to generate a converged flow field in TURBO. This procedure initialized computations on a coarsened mesh generated by the Turbomachinery Gridding System (TGS) and relied on a method of systematically increasing wheel speed and backpressure. Baseline design-speed TURBO results generally overpredicted total pressure ratio, adiabatic efficiency, and the choking flow rate of the HECC stage as compared with the design-intent CFD results of Code Leo. Including diffuser fillet geometry in the TURBO computation resulted in a 0.6 percent reduction in the choking flow rate and led to a better match with design-intent CFD. Diffuser fillets reduced annulus cross-sectional area but also reduced corner separation, and thus blockage, in the diffuser passage. It was found that the TURBO computations are somewhat insensitive to inlet total pressure changing from the TURBO default inlet pressure of 14.7 pounds per square inch (101.35 kilopascals) down to 11.0 pounds per square inch (75.83 kilopascals), the inlet pressure of the component test. Off-design tip clearance was modeled in TURBO in two computations: one in which the blade tip geometry was trimmed by 12 mils (0.3048 millimeters), and another in which the hub flow path was moved to reflect a 12-mil axial shift in the impeller hub, creating a step at the hub. The one-dimensional results of these two computations indicate non-negligible differences between the two modeling approaches.

Finding p-Hub Median Locations: An Empirical Study on Problems and Solution Techniques

Directory of Open Access Journals (Sweden)

Xiaoqian Sun

2017-01-01

Full Text Available Hub location problems have been studied by many researchers for almost 30 years, and, accordingly, various solution methods have been proposed. In this paper, we implement and evaluate several widely used methods for solving five standard hub location problems. To assess the scalability and solution qualities of these methods, three well-known datasets are used as case studies: Turkish Postal System, Australia Post, and Civil Aeronautics Board. Classical problems in small networks can be solved efficiently using CPLEX because of their low complexity. Genetic algorithms perform well for solving three types of single allocation problems, since the problem formulations can be neatly encoded with chromosomes of reasonable size. Lagrangian relaxation is the only technique that solves reliable multiple allocation problems in large networks. We believe that our work helps other researchers to get an overview on the best solution techniques for the problems investigated in our study and also stipulates further interest on cross-comparing solution techniques for more expressive problem formulations.

Comparison of thermal solar collector technologies and their applications

OpenAIRE

Alarcón Villamil, Alexander; Hortúa, Jairo Eduardo; López, Andrea

2013-01-01

This paper presents the operation of different thermal solar collector technologies and their main characteristics. It starts by providing a brief description of the importance of using solar collectors as an alternative to reduce the environmental impact caused by the production of non-renewable sources like coal and oil. Subsequently, it focuses on each solar concentrator technology and finishes with a theoretical analysis hub application in different industrial processes. En este artícu...

Helminth-infected patients with malaria: a low profile transmission hub?

Science.gov (United States)

Nacher, Mathieu

2012-11-15

Eclipsed by the debates about malaria incidence and severity in individual patients, malaria transmission in helminth-infected persons has so far received very little attention. Studies in humans have shown increased malaria incidence and prevalence, and a trend for a reduction of symptoms in patients with malaria. This suggests that such patients could possibly be less likely to seek treatment thus carrying malaria parasites and their gametocytes for longer durations, therefore, being a greater potential source of transmission. In addition, in humans, a study showed increased gametocyte carriage, and in an animal model of helminth-malaria co-infection, there was increased malaria transmission. These elements converge towards the hypothesis that patients co-infected with worms and malaria may represent a hub of malaria transmission. The test of this hypothesis requires verifying, in different epidemiological settings, that helminth-infected patients have more gametocytes, that they have less symptomatic malaria and longer-lasting infections, and that they are more attractive for the vectors. The negative outcome in one setting of one of the above aspects does not necessarily mean that the other two aspects may suffice to increase transmission. If it is verified that patients co-infected by worms and malaria could be a transmission hub, this would be an interesting piece of strategic information in the context of the spread of anti-malarial resistance and the malaria eradication attempts.

A review study of the current research on energy hub for energy positive neighborhoods

NARCIS (Netherlands)

Walker, S.W.W.; Labeodan, T.; Maassen, W.H.; Zeiler, W.

2017-01-01

Energy positive neighborhoods and cities are emerging concepts aimed at addressing the current energy and environmental sustainability challenges. In this paper, the concept and current research on energy hubs relating to energy positive neighborhoods are presented. In addition to discussing

The home hemodialysis hub: physical infrastructure and integrated governance structure.

Science.gov (United States)

Marshall, Mark R; Young, Bessie A; Fox, Sally J; Cleland, Calli J; Walker, Robert J; Masakane, Ikuto; Herold, Aaron M

2015-04-01

An effective home hemodialysis program critically depends on adequate hub facilities and support functions and on transparent and accountable organizational processes. The likelihood of optimal service delivery and patient care will be enhanced by fit-for-purpose facilities and implementation of a well-considered governance structure. In this article, we describe the required accommodation and infrastructure for a home hemodialysis program and a generic organizational structure that will support both patient-facing clinical activities and business processes. © 2015 International Society for Hemodialysis.

An Airlift Hub-and-Spoke Location-Routing Model with Time Windows: Case Study of the CONUS-to-Korea Airlift Problem

Science.gov (United States)

1998-03-01

a point of embarkation to a point of debarkation. This study develops an alternative hub-and-spoke combined location-routing integer linear...programming prototype model, and uses this model to determine what advantages a hub-and-spoke system offers, and in which scenarios it is better-suited than the...extension on the following works: the hierarchical model of Perl and Daskin (1983), time windows features of Chan (1991), combining subtour-breaking and range

Preliminary design study of advanced composite blade and hub and nonmechanical control system for the tilt-rotor aircraft. Volume 2: Project planning data

Science.gov (United States)

1980-01-01

Project planning data for a rotor and control system procurement and testing program for modifications to the XV-15 tilt-rotor research demonstrator aircraft is presented. The design, fabrication, and installation of advanced composite blades compatible with the existing hub, an advanced composite hub, and a nonmechanical control system are required.

C-NET: the Centre for Nuclear Energy Technology

International Nuclear Information System (INIS)

Roberts, J.W.

2011-01-01

The Centre for Nuclear Energy Technology was established as part of the Dalton Nuclear Institute at The University of Manchester in 2009 to focus the UK research on front-end nuclear technologies. This includes plant-life extension, new build, naval propulsion and next generation reactors. Building on £4M of government funding through the North West Development Agency (NWDA), C-NET will act as a hub for nuclear research in the North West of England collaborating with both universities and industry. (author)

Lazy Updating of hubs can enable more realistic models by speeding up stochastic simulations

International Nuclear Information System (INIS)

Ehlert, Kurt; Loewe, Laurence

2014-01-01

To respect the nature of discrete parts in a system, stochastic simulation algorithms (SSAs) must update for each action (i) all part counts and (ii) each action's probability of occurring next and its timing. This makes it expensive to simulate biological networks with well-connected “hubs” such as ATP that affect many actions. Temperature and volume also affect many actions and may be changed significantly in small steps by the network itself during fever and cell growth, respectively. Such trends matter for evolutionary questions, as cell volume determines doubling times and fever may affect survival, both key traits for biological evolution. Yet simulations often ignore such trends and assume constant environments to avoid many costly probability updates. Such computational convenience precludes analyses of important aspects of evolution. Here we present “Lazy Updating,” an add-on for SSAs designed to reduce the cost of simulating hubs. When a hub changes, Lazy Updating postpones all probability updates for reactions depending on this hub, until a threshold is crossed. Speedup is substantial if most computing time is spent on such updates. We implemented Lazy Updating for the Sorting Direct Method and it is easily integrated into other SSAs such as Gillespie's Direct Method or the Next Reaction Method. Testing on several toy models and a cellular metabolism model showed >10× faster simulations for its use-cases—with a small loss of accuracy. Thus we see Lazy Updating as a valuable tool for some special but important simulation problems that are difficult to address efficiently otherwise

Computerised mirror therapy with Augmented Reflection Technology for early stroke rehabilitation: clinical feasibility and integration as an adjunct therapy.

Science.gov (United States)

Hoermann, Simon; Ferreira Dos Santos, Luara; Morkisch, Nadine; Jettkowski, Katrin; Sillis, Moran; Devan, Hemakumar; Kanagasabai, Parimala S; Schmidt, Henning; Krüger, Jörg; Dohle, Christian; Regenbrecht, Holger; Hale, Leigh; Cutfield, Nicholas J

2017-07-01

New rehabilitation strategies for post-stroke upper limb rehabilitation employing visual stimulation show promising results, however, cost-efficient and clinically feasible ways to provide these interventions are still lacking. An integral step is to translate recent technological advances, such as in virtual and augmented reality, into therapeutic practice to improve outcomes for patients. This requires research on the adaptation of the technology for clinical use as well as on the appropriate guidelines and protocols for sustainable integration into therapeutic routines. Here, we present and evaluate a novel and affordable augmented reality system (Augmented Reflection Technology, ART) in combination with a validated mirror therapy protocol for upper limb rehabilitation after stroke. We evaluated components of the therapeutic intervention, from the patients' and the therapists' points of view in a clinical feasibility study at a rehabilitation centre. We also assessed the integration of ART as an adjunct therapy for the clinical rehabilitation of subacute patients at two different hospitals. The results showed that the combination and application of the Berlin Protocol for Mirror Therapy together with ART was feasible for clinical use. This combination was integrated into the therapeutic plan of subacute stroke patients at the two clinical locations where the second part of this research was conducted. Our findings pave the way for using technology to provide mirror therapy in clinical settings and show potential for the more effective use of inpatient time and enhanced recoveries for patients. Implications for Rehabilitation Computerised Mirror Therapy is feasible for clinical use Augmented Reflection Technology can be integrated as an adjunctive therapeutic intervention for subacute stroke patients in an inpatient setting Virtual Rehabilitation devices such as Augmented Reflection Technology have considerable potential to enhance stroke rehabilitation.

Positioning Mauritius as a Knowledge Hub in the Context of Globalisation

OpenAIRE

Deepa Gokulsing

2014-01-01

Knowledge is the most valued commodity in the global economy. Since 2005, it has been proposed to develop Mauritius into a knowledge hub and a centre of higher learning, thus meeting the needs of an increasingly competitive, knowledge-based and globalised economy. Therefore, this paper provides an understanding of the higher education system in Mauritius. Secondly, it explores the interconnection between globalisation and higher education in Mauritius. Thirdly, it also focuses the challenges ...

Role of high technology in the nuclear industry

International Nuclear Information System (INIS)

Cain, D.G.

1986-01-01

A discussion of high technology identifies the characteristics which distinguish it from conventional technologies, and the impact high technology will have in the nuclear power industry in the near future. The basic theme is that high technology is an ensemble of competing technological developments that shifts with time and technological innovation. The attributes which current distinguish high technology are compactness, plasticity, convergence, and intelligence. These high technology attributes are presented as a prelude to some examples of high technology developments which are just beginning to penetrate the nuclear industry. Concluding remarks address some of the challenges which must be faced in order to assure that high technology is successfully adapted and used

Porous Nanomaterials for Ultrabroadband Omnidirectional Anti-Reflection Surfaces with Applications in High Concentration Photovoltaics

KAUST Repository

Yao, Yuan

2016-12-06

Materials for nanoporous coatings that exploit optimized chemistries and self-assembly processes offer capabilities to reach ≈98% transmission efficiency and negligible scattering losses over the broad wavelength range of the solar spectrum from 350 nm to 1.5 μm, on both flat and curved glass substrates. These nanomaterial anti-reflection coatings also offer wide acceptance angles, up to ±40°, for both s- and p-polarization states of incident light. Carefully controlled bilayer films have allowed for the fabrication of dual-sided, gradient index profiles on plano-convex lens elements. In concentration photovoltaics platforms, the resultant enhancements in the photovoltaics efficiencies are ≈8%, as defined by experimental measurements on systems that use microscale triple-junction solar cells. These materials and their applications in technologies that require control over interface reflections have the potential for broad utility in imaging systems, photolithography, light-emitting diodes, and display technologies.

Orbital Hub: a concept for human spaceflight beyond ISS operations

Science.gov (United States)

Jahnke, Stephan S.; Maiwald, Volker; Philpot, Claudia; Quantius, Dominik; Romberg, Oliver; Seboldt, Wolfgang; Vrakking, Vincent; Zeidler, Conrad

2018-04-01

The International Space Station (ISS) is the greatest endeavour in low-Earth orbit since the beginning of the space age and the culmination of human outposts like Skylab and Mir. While a clear schedule has yet to be drafted, it is expected that ISS will cease operation in the 2020s. What could be the layout for a human outpost in LEO with lessons learnt from ISS? What are the use cases and applications of such an outpost in the future? The System Analysis Space Segment group of the German Aerospace Center investigated these and other questions and developed the Orbital Hub concept. In this paper an overview is presented of how the overall concept has been derived and its properties and layouts are described. Starting with a workshop involving the science community, the scientific requirements have been derived and Strawman payloads have been defined for use in further design activities. These design activities focused on Concurrent Engineering studies, where besides DLR employees participants from the industry and astronauts were involved. The result is an expandable concept that is composed of two main parts, the Base Platform, home for a permanent crew of up to three astronauts, and the Free Flyer, an uncrewed autonomous research platform. This modular approach provides one major advantage: the decoupling of the habitat and payload leading to increased quality of the micro-gravity environment. The former provides an environment for human physiology experiments, while the latter allows science without the perturbations caused by a crew, e.g. material experiments or Earth observation. The Free Flyer is designed to operate for up to 3 months on its own, but can dock with the space station for maintenance and experiment servicing. It also has a hybrid propulsion system, chemical and electrical, for different applications. The hub's design allows launch with just three launches, as the total mass of all the hub parts is about 60,000 kg. The main focus of the design is

APPROACHES TO FORMING A TECHNOLOGICAL HUB IN LOMONOSOV MOSCOW STATE UNIVERSITY

Directory of Open Access Journals (Sweden)

V. KomarovM.

2016-01-01

Full Text Available LomonosovMoscowStateUniversityis a leading Russian institution of higher education, the only one included in the top 100 authoritative global ranking – ARWU (Shanghairanking. Since 2014 it is planned to implement a large-scale project of theTechnologyValleyinRussia, the research world-class center associated with the University. The paper analyzes the main approaches to the implementation of the project, based on the analysis of international experience. We formulated recommendations for its implementation. In the modern world, the competitiveness of the country is determined by its ability to create opportunities for human potential, to attract and retain the most talented people. TheTechnologyValleyproject inRussiashould be developed regarding to its local position advantages and theMoscowuniversity development goals should also be taken into account. The accelerated development of the project can become a successful anti-crisis strategy. 

Helminth-infected patients with malaria: a low profile transmission hub?

Directory of Open Access Journals (Sweden)

Nacher Mathieu

2012-11-01

Full Text Available Abstract Eclipsed by the debates about malaria incidence and severity in individual patients, malaria transmission in helminth-infected persons has so far received very little attention. Studies in humans have shown increased malaria incidence and prevalence, and a trend for a reduction of symptoms in patients with malaria. This suggests that such patients could possibly be less likely to seek treatment thus carrying malaria parasites and their gametocytes for longer durations, therefore, being a greater potential source of transmission. In addition, in humans, a study showed increased gametocyte carriage, and in an animal model of helminth-malaria co-infection, there was increased malaria transmission. These elements converge towards the hypothesis that patients co-infected with worms and malaria may represent a hub of malaria transmission. The test of this hypothesis requires verifying, in different epidemiological settings, that helminth-infected patients have more gametocytes, that they have less symptomatic malaria and longer-lasting infections, and that they are more attractive for the vectors. The negative outcome in one setting of one of the above aspects does not necessarily mean that the other two aspects may suffice to increase transmission. If it is verified that patients co-infected by worms and malaria could be a transmission hub, this would be an interesting piece of strategic information in the context of the spread of anti-malarial resistance and the malaria eradication attempts.

On the Predictability of Hub Height Winds

DEFF Research Database (Denmark)

Draxl, Caroline

Wind energy is a major source of power in over 70 countries across the world, and the worldwide share of wind energy in electricity consumption is growing. The introduction of signicant amounts of wind energy into power systems makes accurate wind forecasting a crucial element of modern electrical...... grids. These systems require forecasts with temporal scales of tens of minutes to a few days in advance at wind farm locations. Traditionally these forecasts predict the wind at turbine hub heights; this information is then converted by transmission system operators and energy companies into predictions...... of power output at wind farms. Since the power available in the wind is proportional to the wind speed cubed, even small wind forecast errors result in large power prediction errors. Accurate wind forecasts are worth billions of dollars annually; forecast improvements will result in reduced costs...

Numerical and Experimental Investigation of Heat Flow in Permanent Magnet Brushless DC Hub Motor

DEFF Research Database (Denmark)

Fasil, Muhammed; Plesner, Daniel; Walther, Jens Honore

2014-01-01

This paper investigates the heat dissipation in the hub motor of an electric two-wheeler using lumped parameter (LP), finite element (FE) and computational fluid dynamic (CFD) models. The motor uses external rotor permanent magnet brushless DC topology and nearly all of its losses are generated...

Identifying hubs and spokes in global supply chains using redirected trade in value added

NARCIS (Netherlands)

Lejour, Arjan; Rojas-Romagosa, Hugo; Veenendaal, Paul

2017-01-01

The increasing importance of global supply chains has prompted the use of analytical tools based on trade in value added - instead of traditional measures in gross value. We use this analytical framework to develop indicators that identify production hubs and supply spokes in global supply chains.

Partial synchronization in networks of non-linearly coupled oscillators: The Deserter Hubs Model

Energy Technology Data Exchange (ETDEWEB)

Freitas, Celso, E-mail: cbnfreitas@gmail.com; Macau, Elbert, E-mail: elbert.macau@inpe.br [Associate Laboratory for Computing and Applied Mathematics - LAC, Brazilian National Institute for Space Research - INPE (Brazil); Pikovsky, Arkady, E-mail: pikovsky@uni-potsdam.de [Department of Physics and Astronomy, University of Potsdam, Germany and Department of Control Theory, Nizhni Novgorod State University, Gagarin Av. 23, 606950, Nizhni Novgorod (Russian Federation)

2015-04-15

We study the Deserter Hubs Model: a Kuramoto-like model of coupled identical phase oscillators on a network, where attractive and repulsive couplings are balanced dynamically due to nonlinearity of interactions. Under weak force, an oscillator tends to follow the phase of its neighbors, but if an oscillator is compelled to follow its peers by a sufficient large number of cohesive neighbors, then it actually starts to act in the opposite manner, i.e., in anti-phase with the majority. Analytic results yield that if the repulsion parameter is small enough in comparison with the degree of the maximum hub, then the full synchronization state is locally stable. Numerical experiments are performed to explore the model beyond this threshold, where the overall cohesion is lost. We report in detail partially synchronous dynamical regimes, like stationary phase-locking, multistability, periodic and chaotic states. Via statistical analysis of different network organizations like tree, scale-free, and random ones, we found a measure allowing one to predict relative abundance of partially synchronous stationary states in comparison to time-dependent ones.

Quantifying Reflection

DEFF Research Database (Denmark)

Alcock, Gordon Lindsay

2013-01-01

´ These are all based on Blooms taxonomy and levels of competence and form a major part of individual student and group learning portfolios. Key Words :Project-Based learning, Reflective Portfolios, Self assessment, Defining learning gains, Developing learning strategies , Reflections on and for learning....... It contrasts the students’ self-assessment in a range of ‘product’ skills such as Revit, Structural Design, Mathematics of construction, Technical Installations; as well as ‘process’ competencies such as ‘Working in a team’, Sharing knowledge, Maintaining a portfolio and Reflecting ON learning and FOR learning......This paper documents 1st semester student reflections on “learning to learn” in a team-based PBL environment with quantitative and qualitative student reflective feedback on the learning gains of 60 Architectural Technology and Construction Management students at VIA University College, Denmark...

Gene Network Construction from Microarray Data Identifies a Key Network Module and Several Candidate Hub Genes in Age-Associated Spatial Learning Impairment.

Science.gov (United States)

Uddin, Raihan; Singh, Shiva M

2017-01-01

As humans age many suffer from a decrease in normal brain functions including spatial learning impairments. This study aimed to better understand the molecular mechanisms in age-associated spatial learning impairment (ASLI). We used a mathematical modeling approach implemented in Weighted Gene Co-expression Network Analysis (WGCNA) to create and compare gene network models of young (learning unimpaired) and aged (predominantly learning impaired) brains from a set of exploratory datasets in rats in the context of ASLI. The major goal was to overcome some of the limitations previously observed in the traditional meta- and pathway analysis using these data, and identify novel ASLI related genes and their networks based on co-expression relationship of genes. This analysis identified a set of network modules in the young, each of which is highly enriched with genes functioning in broad but distinct GO functional categories or biological pathways. Interestingly, the analysis pointed to a single module that was highly enriched with genes functioning in "learning and memory" related functions and pathways. Subsequent differential network analysis of this "learning and memory" module in the aged (predominantly learning impaired) rats compared to the young learning unimpaired rats allowed us to identify a set of novel ASLI candidate hub genes. Some of these genes show significant repeatability in networks generated from independent young and aged validation datasets. These hub genes are highly co-expressed with other genes in the network, which not only show differential expression but also differential co-expression and differential connectivity across age and learning impairment. The known function of these hub genes indicate that they play key roles in critical pathways, including kinase and phosphatase signaling, in functions related to various ion channels, and in maintaining neuronal integrity relating to synaptic plasticity and memory formation. Taken together, they

High-reflective colorful films fabricated by all-solid multi-layer cholesteric structures

Science.gov (United States)

Li, Y.; Luo, D.

2018-02-01

We demonstrate all-solid-state film with high-reflectivity based on cholesteric template. The adhesive (NOA81) is both filler and an adhesive, which can be avoids interfacial losses. The reflected right- and left-circularly polarized light has been developed by roll-to-roll method, and the reflectance of the films is more than 78%. Here, the all-solid film was used in distribute feedback laser with dye-doped. In addition, this films also used in include flexible reflective display, color pixels in digital photographs, printing and colored cladding of variety of objects.

Low reflectance high power RF load

Science.gov (United States)

Ives, R. Lawrence; Mizuhara, Yosuke M.

2016-02-02

A load for traveling microwave energy has an absorptive volume defined by cylindrical body enclosed by a first end cap and a second end cap. The first end cap has an aperture for the passage of an input waveguide with a rotating part that is coupled to a reflective mirror. The inner surfaces of the absorptive volume consist of a resistive material or are coated with a coating which absorbs a fraction of incident RF energy, and the remainder of the RF energy reflects. The angle of the reflector and end caps is selected such that reflected RF energy dissipates an increasing percentage of the remaining RF energy at each reflection, and the reflected RF energy which returns to the rotating mirror is directed to the back surface of the rotating reflector, and is not coupled to the input waveguide. Additionally, the reflector may have a surface which generates a more uniform power distribution function axially and laterally, to increase the power handling capability of the RF load. The input waveguide may be corrugated for HE11 mode input energy.

Price interactions and discovery among natural gas spot markets in North America

International Nuclear Information System (INIS)

Park, Haesun; Mjelde, James W.; Bessler, David A.

2008-01-01

Recent advances in modeling causal flows with time series analysis are used to study relationships among eight North American natural gas spot market prices. Results indicate that the Canadian and US natural gas market is a single highly integrated market. Further results indicate that price discovery tends to reflect both regions of excess demand and supply. Across North America, Malin Hub in Oregon, Chicago Hub, Illinois, Waha, Texas, and Henry Hub, Louisiana region, are the most important markets for price discovery. Opal Hub in Wyoming is an information sink in contemporaneous time, receiving price information but passing on no price information. AECO Hub in Alberta, Canada, receives price signals from several markets and passes on information to Opal and the Oklahoma region. (author)

High performance fuel technology development

Energy Technology Data Exchange (ETDEWEB)

Koon, Yang Hyun; Kim, Keon Sik; Park, Jeong Yong; Yang, Yong Sik; In, Wang Kee; Kim, Hyung Kyu [KAERI, Daejeon (Korea, Republic of)

2012-01-15

{omicron} Development of High Plasticity and Annular Pellet - Development of strong candidates of ultra high burn-up fuel pellets for a PCI remedy - Development of fabrication technology of annular fuel pellet {omicron} Development of High Performance Cladding Materials - Irradiation test of HANA claddings in Halden research reactor and the evaluation of the in-pile performance - Development of the final candidates for the next generation cladding materials. - Development of the manufacturing technology for the dual-cooled fuel cladding tubes. {omicron} Irradiated Fuel Performance Evaluation Technology Development - Development of performance analysis code system for the dual-cooled fuel - Development of fuel performance-proving technology {omicron} Feasibility Studies on Dual-Cooled Annular Fuel Core - Analysis on the property of a reactor core with dual-cooled fuel - Feasibility evaluation on the dual-cooled fuel core {omicron} Development of Design Technology for Dual-Cooled Fuel Structure - Definition of technical issues and invention of concept for dual-cooled fuel structure - Basic design and development of main structure components for dual- cooled fuel - Basic design of a dual-cooled fuel rod.

Transforming the New Brunswick Energy Hub: An Analysis on Renewable Energy

Science.gov (United States)

Gunter, Christopher

This research examines the benefits and disadvantages of instituting a shift from fossil fuel dependence to renewable sources of energy in New Brunswick. The New Brunswick Energy Hub is a complex system acting under the mandate of the White Paper New Brunswick Energy Policy. In my research, I consider information derived from statistical indicators developed by Patlitzianas, Doukas, Kagiannas and Psarras (2008) and compare these findings to the efficacy of energy policies in Germany, Denmark and Spain. These countries are similar to New Brunswick in climate and organizational complexity (US Department of Commerce, 2009). Weighing the outcomes of this comparative study, I discuss my recommendations highlighting the environmental and economic benefits. My research investigates subsidies in each country that allowed them early economic and environmental advantages. Specific regional considerations, such as Denmark's trend of selling energy technology for profit over domestic applications, inform my conclusions. The future New Brunswick Energy Policy should focus on creating favorable conditions for renewable energy development to occur. Some proven conditions include infrastructure development subsidies and the development and annual review of a competitive open access transmission tariff. With the expiry of the current White Paper comes the necessity of this investigation, and the opportunity to address the growing financial and environmental concerns that many politicians and policy planners have failed to deal with in past policies.

Progress in high-energy laser technology

International Nuclear Information System (INIS)

Miyanaga, Noriaki; Kitagawa, Yoneyoshi; Nakatsuka, Masahiro; Kanabe, Tadashi; Okuda, Isao

2005-01-01

The technological development of high-energy lasers is one of the key issues in laser fusion research. This paper reviews several technologies on the Nd:glass laser and KrF excimer laser that are being used in the current laser fusion experiments and related plasma experiments. Based on the GEKKO laser technology, a new high-energy Nd: glass laser system, which can deliver energy from 10 kJ (boad-band operation) to 20 kJ (narrow-band operation), is under construction. The key topics in KrF laser development are improved efficiency and repetitive operation, which aim at the development of a laser driven for fusion reactor. Ultra-intense-laser technology is also very important for fast ignition research. The key technology for obtaining the petawatt output with high beam quality is reviewed. Regarding the uniform laser irradiation required for high-density compression, the beam-smoothing methods on the GEKKO XII laser are reviewed. Finally, we discuss the present status of MJ-class lasers throughout the world, and summarize by presenting the feasibility of various applications of the high-energy lasers to a wide range of scientific and technological fields. (author)

Review of CMOS Integrated Circuit Technologies for High-Speed Photo-Detection.

Science.gov (United States)

Jeong, Gyu-Seob; Bae, Woorham; Jeong, Deog-Kyoon

2017-08-25

The bandwidth requirement of wireline communications has increased exponentially because of the ever-increasing demand for data centers and high-performance computing systems. However, it becomes difficult to satisfy the requirement with legacy electrical links which suffer from frequency-dependent losses due to skin effects, dielectric losses, channel reflections, and crosstalk, resulting in a severe bandwidth limitation. In order to overcome this challenge, it is necessary to introduce optical communication technology, which has been mainly used for long-reach communications, such as long-haul networks and metropolitan area networks, to the medium- and short-reach communication systems. However, there still remain important issues to be resolved to facilitate the adoption of the optical technologies. The most critical challenges are the energy efficiency and the cost competitiveness as compared to the legacy copper-based electrical communications. One possible solution is silicon photonics which has long been investigated by a number of research groups. Despite inherent incompatibility of silicon with the photonic world, silicon photonics is promising and is the only solution that can leverage the mature complementary metal-oxide-semiconductor (CMOS) technologies. Silicon photonics can be utilized in not only wireline communications but also countless sensor applications. This paper introduces a brief review of silicon photonics first and subsequently describes the history, overview, and categorization of the CMOS IC technology for high-speed photo-detection without enumerating the complex circuital expressions and terminologies.

Pore-level determination of spectral reflection behaviors of high-porosity metal foam sheets

Science.gov (United States)

Li, Yang; Xia, Xin-Lin; Ai, Qing; Sun, Chuang; Tan, He-Ping

2018-03-01

Open cell metal foams are currently attracting attention and their radiative behaviors are of primary importance in high temperature applications. The spectral reflection behaviors of high-porosity metal foam sheets, bidirectional reflectance distribution function (BRDF) and directional-hemispherical reflectivity were numerically investigated. A set of realistic nickel foams with porosity from 0.87 to 0.97 and pore density from 10 to 40 pores per inch were tomographied to obtain their 3-D digital cell network. A Monte Carlo ray-tracing method was employed in order to compute the pore-level radiative transfer inside the network within the limit of geometrical optics. The apparent reflection behaviors and their dependency on the textural parameters and strut optical properties were comprehensively computed and analysed. The results show a backward scattering of the reflected energy at the foam sheet surface. Except in the cases of large incident angles, an energy peak is located almost along the incident direction and increases with increasing incident angles. Through an analytical relation established, the directional-hemispherical reflectivity can be related directly to the porosity of the foam sheet and to the complex refractive index of the solid phase as well as the specularity parameter which characterizes the local reflection model. The computations show that a linear decrease in normal-hemispherical reflectivity occurs with increasing porosity. The rate of this decrease is directly proportional to the strut normal reflectivity. In addition, the hemispherical reflectivity increases as a power function of the incident angle cosine.

Climbing Up the Technology Ladder? High-Technology Exports in China and Latin America

OpenAIRE

Gallagher, Kevin P.; Porzecanski, Roberto

2008-01-01

In this paper we determine the “dynamic revealed competitiveness position” (DRCP) of nations for high technology exports between 1980 and 2005. We find that the developed world has lost significant market share in high technology and that China has climbed the high technology ladder during this period. In 1980 China was ranked 99th of all nations in terms of the percentage of global exports in high technology. By 2005 China climbed to second place in the world, first place if high technology ...

Abnormal intrinsic functional hubs in alcohol dependence: evidence from a voxelwise degree centrality analysis

Directory of Open Access Journals (Sweden)

Luo X

2017-07-01

Full Text Available Xiaoping Luo,1,2 Linghong Guo,1 Xi-Jian Dai,3 Qinglai Wang,2 Wenzhong Zhu,2 Xinjun Miao,2 Honghan Gong1 1Department of Radiology, The First Affiliated Hospital of Nanchang University, Nangchang, Jiangxi, People’s Republic of China; 2Department of Radiology, Wenzhou Chinese Medicine Hospital, Wenzhou, Zhejiang, People’s Republic of China; 3Department of Medical Imaging, Jinling Hospital, Medical School of Nanjing University, Nanjing, Jiangsu, People’s Republic of China Objective: To explore the abnormal intrinsic functional hubs in alcohol dependence using voxelwise degree centrality analysis approach, and their relationships with clinical features.Materials and methods: Twenty-four male alcohol dependence subjects free of medicine (mean age, 50.21±9.62 years and 24 age- and education-matched male healthy controls (mean age, 50.29±8.92 years were recruited. The alcohol use disorders identification test and the severity of alcohol dependence questionnaire (SADQ were administered to assess the severity of alcohol craving. Voxelwise degree centrality approach was used to assess the abnormal intrinsic functional hubs features in alcohol dependence. Simple linear regression analysis was performed to investigate the relationships between the clinical features and abnormal intrinsic functional hubs.Results: Compared with healthy controls, alcohol dependence subjects exhibited significantly different degree centrality values in widespread left lateralization brain areas, including higher degree centrality values in the left precentral gyrus (BA 6, right hippocampus (BA 35, 36, and left orbitofrontal cortex (BA 11 and lower degree centrality values in the left cerebellum posterior lobe, bilateral secondary visual network (BA 18, and left precuneus (BA 7, 19. SADQ revealed a negative linear correlation with the degree centrality value in the left precentral gyrus (R2=0.296, P=0.006.Conclusion: The specific abnormal intrinsic functional hubs appear

Continuous Integration for Concurrent MOOSE Framework and Application Development on GitHub

OpenAIRE

Slaughter, Andrew E.; Peterson, John W.; Gaston, Derek R.; Permann, Cody J.; Andrš, David; Miller, Jason M.

2015-01-01

For the past several years, Idaho National Laboratory’s MOOSE framework team has employed modern software engineering techniques (continuous integration, joint application/framework source code repos- itories, automated regression testing, etc.) in developing closed-source multiphysics simulation software (Gaston et al., 'Journal of Open Research Software' vol. 2, article e10, 2014). In March 2014, the MOOSE framework was released under an open source license on GitHub, significantly expandin...

State investments in high-technology job growth.

Science.gov (United States)

Leicht, Kevin T; Jenkins, J Craig

2017-07-01

Since the early 1970's state and local governments have launched an array of economic development programs designed to promote high-technology development. The question our analysis addresses is whether these programs promote long-term high-technology employment growth net of state location and agglomeration advantages. Proponents talk about an infrastructure strategy that promotes investment in public research and specialized infrastructure to attract and grow new high technology industries in specific locations, and a more decentralized entrepreneurial strategy that reinforces local agglomeration capacities by investing in new enterprises and products, promoting the development of local networks and partnerships. Our results support the entrepreneurial strategy, suggesting that state governments can accelerate high technology development by adopting market-supportive programs that complement private sector initiatives. In addition to positive direct benefits of technology deployment/transfer programs and SBIR programs, entrepreneurial programs affect change in high-technology employment in concert with existing locational and agglomeration advantages. Rural (i.e. low population density) states tend to benefit by technology development programs. Infrastructure strategy programs also facilitate high technology job growth in places where local advantages already exist. Our results suggest that critics of industrial policy are correct that high technology growth is organic and endogenous, yet state governments are able to "pick winners and losers" in ways that grow their local economy. Copyright © 2017 Elsevier Inc. All rights reserved.

Southern Africa Regional Office of Astronomy for Development: A New Hub for Astronomy for Development

Science.gov (United States)

Siseho Mutondo, Moola

2015-08-01

A new Astronomy for Development hub needs innovative tools and programs. SAROAD is developing exciting tools integrating Raspberry Pi® technology to bring cost-effective astronomy content to learning centres. SAROAD would also like to report achievements in realising the IAU's strategic plan. In order to manage, evaluate and coordinate regional IAU capacity building programmes, including the recruitment and mobilisation of volunteers, SAROAD has built an intranet that is accessible to regional members upon request. Using this resource, regional members can see and participate in regional activities. This resource also forms the foundation for closer collaboration between SAROAD member countries. SAROAD has commenced with projects in the three Task Force areas of Universities and Research, Children and Schools and Public Outreach. Under the three Task Force areas, a total of seven projects have commenced in Zambia. A further two projects involve the collaboration of Zambia and other regional member countries in order to foster engagement with important regional astronomy facilities (e.g. SKA). SAROAD has identified the IAU’s International Year of Light and a starting point for offering regional support for IAU-endorsed global activities. SAROAD has set up a hub dedicated to regional events and activities about the International Year of Light. SAROAD has a database of regional authorities to enable contact with the region's decision makers and experts. SAROAD will hold an annual event which brings forum for astronomy for development. The creation of the database and the SAROAD Road show is a first step towards this goal. The SAROAD website has helped to advertise upcoming events for astronomy development and education; it is used to provide advice, guidance and information for astronomers in all countries in the Southern Africa. Fundraising is the primary goal for SAROAD in 2015 towards financial self-sufficiency by 2020. We report on the methods that work best

A Hypercat-enabled Semantic Internet of Things Data Hub: Technical Report

OpenAIRE

Tachmazidis, Ilias; Batsakis, Sotiris; Davies, John; Duke, Alistair; Vallati, Mauro; Antoniou, Grigoris; Clarke, Sandra Stincic

2017-01-01

An increasing amount of information is generated from the rapidly increasing number of sensor networks and smart devices. A wide variety of sources generate and publish information in different formats, thus highlighting interoperability as one of the key prerequisites for the success of Internet of Things (IoT). The BT Hypercat Data Hub provides a focal point for the sharing and consumption of available datasets from a wide range of sources. In this work, we propose a semantic enrichment of ...

Communication technologies through an etymological lens: looking for a classification, reflections about health, medicine and care.

Science.gov (United States)

Colucci, Massimiliano

2015-11-01

Information and communication technologies are widely used in healthcare. However, there is not still a unified taxonomy for them. The lack of understanding of this phenomenon implies theoretical and ethical issues. This paper attempts to find out the basis for a classification, starting from a new perspective: the structural elements are obtained from the etymologies of the lexicon commonly used, that is words like telemedicine, telehealth, telecare and telecure. This will promote a better understanding of communication technologies; at the same time, it will allow to draw some reflection about health, medicine and care, and their semantic and relational nature.

Fiscal 1998 research achievement report. Project for developing key technologies for electronic devices (Projection X-ray exposure process technology and active reflective device structure technology); 1998 nendo denshi device kiban gijutsu kaihatsu jigyo seika hokokusho. Shukusho X sen roko process gijutsu to active hansha kozogata keisei gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

Studies were conducted for the development of technologies of the very advanced level relating to an ultrafine machining process and high-performance reflector type liquid crystal display structure formation. Studied in the research and development of projection X-ray exposure process technology were multi-layer film formation, absorbing body film formation, absorbing body machining, multi-layer film mask defect evaluation, and cleaning for defect reduction. As the result, multi-layer film formation by Helicon sputtering and formation and machining of film with Ta acting as absorbing body therein were carried out, and it was found by actual exposure experiments that there were excellent X-ray reflectivity and absorbing body contrast. Furthermore, a study was made of cleaning using dummy foreign matters, and 100% removal of dummy foreign matters was achieved across a range up to the 70nm level. Studied in the development of active reflective device structure technology were the addition of an electrical control function to the reflector, addition of an unreflected rays absorbing function, production of a bias stabilized device for the practical application of a memory function, and the development of materials for the fabrication of the said devices. (NEDO)

High-resolution reflection spectroscopy

International Nuclear Information System (INIS)

Ducloy, Martial

1997-01-01

In this article some recent developments in selective reflection spectroscopy is reviewed and the various ways to extend Doppler free techniques to this spectroscopic field is discussed. Its main feature is to probe atomic gas close to the cell boundaries

Preserving third year medical students' empathy and enhancing self-reflection using small group "virtual hangout" technology.

Science.gov (United States)

Duke, Pamela; Grosseman, Suely; Novack, Dennis H; Rosenzweig, Steven

2015-01-01

Medical student professionalism education is challenging in scope, purpose, and delivery, particularly in the clinical years when students in large universities are dispersed across multiple clinical sites. We initiated a faculty-facilitated, peer small group course for our third year students, creating virtual classrooms using social networking and online learning management system technologies. The course emphasized narrative self-reflection, group inquiry, and peer support. We conducted this study to analyze the effects of a professionalism course on third year medical students' empathy and self-reflection (two elements of professionalism) and their perceptions about the course. Students completed the Groningen Reflection Ability Scale (GRAS) and the Jefferson Scale of Empathy (JSE) before and after the course and provided anonymous online feedback. The results of the JSE before and after the course demonstrated preservation of empathy rather than its decline. In addition, there was a statistically significant increase in GRAS scores (p < 0.001), suggesting that the sharing of personal narratives may foster reflective ability and reflective practice among third year students. This study supports previous findings showing that students benefit from peer groups and discussion in a safe environment, which may include the use of a virtual group video platform.

Measurement of acoustic properties of the composite materials constituting the main rotor hub of the Agusta-Westland helicopter EH-101 (civil version)

Science.gov (United States)

Tenti, L.; Denis, R.; Lakestani, F.

1991-10-01

The acoustic properties of the EH-101 helicopter rotor hub are tested by characterizing the ultrasonic propagation phenomena in the main directions of the composite materials. The carbon fiber and epoxy resin that make up the rotor hub are measured to determine the attenuation coefficient, phase propagation at normal incidence, and phase propagation as a function of angle of incidence. The speeds are measured for external box and filler samples, and strap samples are discussed separately because of their anisotropic nature and structural importance. Deviations angles of 5 deg cause refraction angles of 10 deg in the deviation of the phase propagation; therefore planar defects with an angle of 10 deg relative to the fiber direction can be easily detected. The method presented is useful in characterizing and locating defects in the composite materials that make up the main rotor hub of helicopters.

PSQM--Reflections of a PSQM Hub Leader

Science.gov (United States)

Johnson, Sue

2011-01-01

Primary Science Quality Mark Scheme is a joint project led by the Association for Science Education, the national network of Science Learning Centres and Barnet Local Authority. The Primary Science Quality Mark is an award scheme to develop and celebrate the quality of science teaching and learning in primary schools. It encourages teachers to let…

Prize for Industrial Applications of Physics: Reflective Cholesteric Liquid Crystals - Innovations in Materials, Display Technology, and Commercialization

Science.gov (United States)

Khan, Asad

Reflective Cholesteric Liquid Crystals have been the subject of much research, development, and commercialization - in display technology as well as other embodiments, such as sensors, privacy films, etc. The liquid Crystal Institute (LCI) at Kent State University (KSU) served as a hot bed of much of the research and development in this field in the early 1990's. From here, the reflective technology was licensed to Kent Displays (KDI) to further develop and commercialize. The 90's saw some development in flexible technologies, drive scheme, display design, as well as materials. The early part of the century took a turn with a strong effort in encapsulation based flexible display development. In 2006, KDI engineers and technologists started firming up ambitious plans for the world's first roll-to-roll manufacturing line for bistable cholesteric displays. In 2009, this became a reality! In early 2010, the first eWriter product was launched into the consumer market under the brand Boogie Board®. Within months, this became a success forcing the rapid development of the manufacturing process for the flexible displays. Today, the company has two manufacturing lines, 24 hour roll-to-roll production of flexible displays, millions of Boogie Board products in the global market place, and a growing OEM business in the Boogie Board technology. KDI continues to do basic research, development, and exploration in the bistable display field. It also has had to become an expert in the supply chain management of the unique raw materials needed for flexible display manufacturing, while still managing global operations with sales offices in several continents and a growing and diversified group of individuals. In this presentation, we will present the story, research, development, technology, and latest trends in bistable cholesteric liquid crystal materials with a particular emphasis on the eWriter technology and market.

An improved method to estimate reflectance parameters for high dynamic range imaging

Science.gov (United States)

Li, Shiying; Deguchi, Koichiro; Li, Renfa; Manabe, Yoshitsugu; Chihara, Kunihiro

2008-01-01

Two methods are described to accurately estimate diffuse and specular reflectance parameters for colors, gloss intensity and surface roughness, over the dynamic range of the camera used to capture input images. Neither method needs to segment color areas on an image, or to reconstruct a high dynamic range (HDR) image. The second method improves on the first, bypassing the requirement for specific separation of diffuse and specular reflection components. For the latter method, diffuse and specular reflectance parameters are estimated separately, using the least squares method. Reflection values are initially assumed to be diffuse-only reflection components, and are subjected to the least squares method to estimate diffuse reflectance parameters. Specular reflection components, obtained by subtracting the computed diffuse reflection components from reflection values, are then subjected to a logarithmically transformed equation of the Torrance-Sparrow reflection model, and specular reflectance parameters for gloss intensity and surface roughness are finally estimated using the least squares method. Experiments were carried out using both methods, with simulation data at different saturation levels, generated according to the Lambert and Torrance-Sparrow reflection models, and the second method, with spectral images captured by an imaging spectrograph and a moving light source. Our results show that the second method can estimate the diffuse and specular reflectance parameters for colors, gloss intensity and surface roughness more accurately and faster than the first one, so that colors and gloss can be reproduced more efficiently for HDR imaging.

Tunable Reflective Spatial Heterodyne Spectrometer: A Technique for High Resolving Power, Wide Field Of View Observation Of Diffuse Emission Line Sources

Science.gov (United States)

Hosseini, Seyedeh Sona

The purpose of this dissertation is to discuss the need for new technology in broadband high-resolution spectroscopy based on the emerging technique of Spatial Heterodyne Spectroscopy (SHS) and to propose new solutions that should enhance and generalize this technology to other fields. Spectroscopy is a proven tool for determining compositional and other properties of remote objects. Narrow band imaging and low resolving spectroscopic measurements provide information about composition, photochemical evolution, energy distribution and density. The extension to high resolving power provides further access to temperature, velocity, isotopic ratios, separation of blended sources, and opacity effects. In current high resolving power devices, the drawback of high-resolution spectroscopy is bound to the instrumental limitations of lower throughput, the necessity of small entrance apertures, sensitivity, field of view, and large physical instrumental size. These limitations quickly become handicapping for observation of faint and/or extended targets and for spacecraft encounters. A technique with promise for the study of faint and extended sources at high resolving power is the reflective format of the Spatial Heterodyne Spectrometer (SHS). SHS instruments are compact and naturally tailored for both high etendue (defined in section 2.2.5) and high resolving power. In contrast, to achieve similar spectral grasp, grating spectrometers require large telescopes. For reference, SHS is a cyclical interferometer that produces Fizeau fringe pattern for all other wavelengths except the tuned wavelength. The large etendue obtained by SHS instruments makes them ideal for observations of extended, low surface brightness, isolated emission line sources, while their intrinsically high spectral resolution enables one to study the dynamical and physical properties described above. This document contains four chapters. Chapter 1, introduces a class of scientific targets that formerly have

Communication and logging hub for rapid prototyping of environmental sensors: presenting the Smartphone.

Science.gov (United States)

Hut, R.

2017-12-01

When desiging prototype sensors for environmental variables a critical step is a comparison campaign where the new sensor is compared to current state of the art sensors. In this step one of the headaches for researchers can be connecting their sensor to a logging or communication device. I present a simple solution: to use smartphone that scans for Bluetooth Low Energy transmissions and uploads any measurement to a data server. In this way the prototype sensor only has to transmit its measurement values over BLE, which can be done using off-the-shelf components. The sensors don't have to be physically connected to the phone, allowing for very rapid deployment of sensors in locations that have a communication hub (ie. phone) installed. The communication and logging hub consists of nothing more than a low cost Android smartphone running a dedicated app. The phone is encased in a waterproof box with a large powerbank and a solar panel. I will demonstrate this live at the Fall Meeting. By installing these phones along permanent WMO certified station locations, comparisons campaigns can use the "golden standard" from the WMO without much problems.

Transport of pollutants and sediment in the area of the Wave Hub (Celtic Sea)

Science.gov (United States)

Shapiro, Georgy; Huntley, David

2010-05-01

Ocean waves are a sustainable source of alternative energy that, if properly developed, will provide a quarter of current electricity demand and contribute to lowering the UK's reliance on fossil fuels. The UK government has given planning approval for a pilot power plant called the Wave Hub located in the eastern Celtic Sea off the Cornish north coast. The impact of a small number of devices on the physical environment is expected to be subtle outside the exclusion zone. However, such pilot projects are considered as the launching pad in the UK's ambitious programme to create a new wave energy industry. Large scale off-shore industrial activity can interact with the physical environment of the shelf sea in a two-fold manner: (i) the wave farm is affected by the waves, currents, variation in temperature and movements of sediment, and (ii) it can impact on the marine environment via a number of ways including release of dissolved and suspended matter during construction, operational and decommission stages of the project. These changes in the physical environment can then be translated into changes of the ecosystem and corresponding human activities. The Celtic Sea has a highly variable and complex thermal structure. In the spring and summer the water column becomes stratified due to solar heating of the surface layer, particularly in the areas of greater depth and/or low currents, where the turbulence is insufficient to mix the entire water column. Fronts form at the junctions of stratified and mixed water columns and these fronts generate currents which flow along the fronts. These frontal currents are subject to baroclinic instability and generate a whole set of mesoscale (i.e. comparable with the baroclinic Rossby radius) features such as eddies, filaments and mushroom currents, which are clearly seen on satellite images. Ecosystems are particularly concentrated in the vicinity of fronts so changes in frontal strength or location can have significant biological

A operação das companhias aéreas nos aeroportos hub & spoke e nas bases operacionais

Directory of Open Access Journals (Sweden)

Cláudia Ribeiro de Almeida

2014-01-01

Full Text Available The process of deregulation of air transportation and all changes that have arisen in the air transport market led to the emergence of new airport concepts, not always clear and easy to understand. Airports Hub & Spoke and operational bases, has specific characteristics to be exploited in this article through case studies that aim to highlight the differences and emphasize its importance for the airlines involved. In this article we are going to evaluate the operation of two airlines that are members of a Strategic Alliance, which operate under a Hub & Spoke network, as well as an example of a low cost airline operating to more than 50 operational bases all over Europe.

Improving the Performance of a Semitransparent BIPV by Using High-Reflectivity Heat Insulation Film

Directory of Open Access Journals (Sweden)

Huei-Mei Liu

2016-01-01

Full Text Available Currently, standard semitransparent photovoltaic (PV modules can largely replace architectural glass installed in the windows, skylights, and facade of a building. Their main features are power generation and transparency, as well as possessing a heat insulating effect. Through heat insulation solar glass (HISG encapsulation technology, this study improved the structure of a typical semitransparent PV module and explored the use of three types of high-reflectivity heat insulation films to form the HISG building-integrated photovoltaics (BIPV systems. Subsequently, the authors analyzed the influence of HISG structures on the optical, thermal, and power generation performance of the original semitransparent PV module and the degree to which enhanced performance is possible. The experimental results indicated that the heat insulation performance and power generation of HISGs were both improved. Selecting an appropriate heat insulation film so that a larger amount of reflective solar radiation is absorbed by the back side of the HISG can yield greater enhancement of power generation. The numerical results conducted in this study also indicated that HISG BIPV system not only provides the passive energy needed for power loading in a building, but also decreases the energy consumption of the HVAC system in subtropical and temperate regions.

TravisTorrent : Synthesizing Travis CI and GitHub for Full-Stack Research on Continuous Integration

NARCIS (Netherlands)

Beller, M.M.; Gousios, Giorgos; Zaidman, A.E.

2017-01-01

Continuous Integration (CI) has become a best practice of modern software development. Thanks in part to its tight integration with GitHub, Travis CI has emerged as arguably the most widely used CI platform for Open-Source Software (OSS) development. However, despite its prominent role in Software

Left frontal hub connectivity delays cognitive impairment in autosomal-dominant and sporadic Alzheimer’s disease

Science.gov (United States)

Franzmeier, Nicolai; Düzel, Emrah; Jessen, Frank; Buerger, Katharina; Levin, Johannes; Duering, Marco; Dichgans, Martin; Haass, Christian; Suárez-Calvet, Marc; Fagan, Anne M; Paumier, Katrina; Benzinger, Tammie; Masters, Colin L; Morris, John C; Perneczky, Robert; Janowitz, Daniel; Catak, Cihan; Wolfsgruber, Steffen; Wagner, Michael; Teipel, Stefan; Kilimann, Ingo; Ramirez, Alfredo; Rossor, Martin; Jucker, Mathias; Chhatwal, Jasmeer; Spottke, Annika; Boecker, Henning; Brosseron, Frederic; Falkai, Peter; Fliessbach, Klaus; Heneka, Michael T; Laske, Christoph; Nestor, Peter; Peters, Oliver; Fuentes, Manuel; Menne, Felix; Priller, Josef; Spruth, Eike J; Franke, Christiana; Schneider, Anja; Kofler, Barbara; Westerteicher, Christine; Speck, Oliver; Wiltfang, Jens; Bartels, Claudia; Araque Caballero, Miguel Ángel; Metzger, Coraline; Bittner, Daniel; Weiner, Michael; Lee, Jae-Hong; Salloway, Stephen; Danek, Adrian; Goate, Alison; Schofield, Peter R; Bateman, Randall J; Ewers, Michael

2018-01-01

Abstract Patients with Alzheimer’s disease vary in their ability to sustain cognitive abilities in the presence of brain pathology. A major open question is which brain mechanisms may support higher reserve capacity, i.e. relatively high cognitive performance at a given level of Alzheimer’s pathology. Higher functional MRI-assessed functional connectivity of a hub in the left frontal cortex is a core candidate brain mechanism underlying reserve as it is associated with education (i.e. a protective factor often associated with higher reserve) and attenuated cognitive impairment in prodromal Alzheimer’s disease. However, no study has yet assessed whether such hub connectivity of the left frontal cortex supports reserve throughout the evolution of pathological brain changes in Alzheimer’s disease, including the presymptomatic stage when cognitive decline is subtle. To address this research gap, we obtained cross-sectional resting state functional MRI in 74 participants with autosomal dominant Alzheimer’s disease, 55 controls from the Dominantly Inherited Alzheimer’s Network and 75 amyloid-positive elderly participants, as well as 41 amyloid-negative cognitively normal elderly subjects from the German Center of Neurodegenerative Diseases multicentre study on biomarkers in sporadic Alzheimer’s disease. For each participant, global left frontal cortex connectivity was computed as the average resting state functional connectivity between the left frontal cortex (seed) and each voxel in the grey matter. As a marker of disease stage, we applied estimated years from symptom onset in autosomal dominantly inherited Alzheimer’s disease and cerebrospinal fluid tau levels in sporadic Alzheimer’s disease cases. In both autosomal dominant and sporadic Alzheimer’s disease patients, higher levels of left frontal cortex connectivity were correlated with greater education. For autosomal dominant Alzheimer’s disease, a significant left frontal cortex connectivity �

Hierarchical feedback modules and reaction hubs in cell signaling networks.

Science.gov (United States)

Xu, Jianfeng; Lan, Yueheng

2015-01-01

Despite much effort, identification of modular structures and study of their organizing and functional roles remain a formidable challenge in molecular systems biology, which, however, is essential in reaching a systematic understanding of large-scale cell regulation networks and hence gaining capacity of exerting effective interference to cell activity. Combining graph theoretic methods with available dynamics information, we successfully retrieved multiple feedback modules of three important signaling networks. These feedbacks are structurally arranged in a hierarchical way and dynamically produce layered temporal profiles of output signals. We found that global and local feedbacks act in very different ways and on distinct features of the information flow conveyed by signal transduction but work highly coordinately to implement specific biological functions. The redundancy embodied with multiple signal-relaying channels and feedback controls bestow great robustness and the reaction hubs seated at junctions of different paths announce their paramount importance through exquisite parameter management. The current investigation reveals intriguing general features of the organization of cell signaling networks and their relevance to biological function, which may find interesting applications in analysis, design and control of bio-networks.

Hierarchical feedback modules and reaction hubs in cell signaling networks.

Directory of Open Access Journals (Sweden)

Jianfeng Xu

Full Text Available Despite much effort, identification of modular structures and study of their organizing and functional roles remain a formidable challenge in molecular systems biology, which, however, is essential in reaching a systematic understanding of large-scale cell regulation networks and hence gaining capacity of exerting effective interference to cell activity. Combining graph theoretic methods with available dynamics information, we successfully retrieved multiple feedback modules of three important signaling networks. These feedbacks are structurally arranged in a hierarchical way and dynamically produce layered temporal profiles of output signals. We found that global and local feedbacks act in very different ways and on distinct features of the information flow conveyed by signal transduction but work highly coordinately to implement specific biological functions. The redundancy embodied with multiple signal-relaying channels and feedback controls bestow great robustness and the reaction hubs seated at junctions of different paths announce their paramount importance through exquisite parameter management. The current investigation reveals intriguing general features of the organization of cell signaling networks and their relevance to biological function, which may find interesting applications in analysis, design and control of bio-networks.

Hierarchical Feedback Modules and Reaction Hubs in Cell Signaling Networks

Science.gov (United States)

Xu, Jianfeng; Lan, Yueheng

2015-01-01

Despite much effort, identification of modular structures and study of their organizing and functional roles remain a formidable challenge in molecular systems biology, which, however, is essential in reaching a systematic understanding of large-scale cell regulation networks and hence gaining capacity of exerting effective interference to cell activity. Combining graph theoretic methods with available dynamics information, we successfully retrieved multiple feedback modules of three important signaling networks. These feedbacks are structurally arranged in a hierarchical way and dynamically produce layered temporal profiles of output signals. We found that global and local feedbacks act in very different ways and on distinct features of the information flow conveyed by signal transduction but work highly coordinately to implement specific biological functions. The redundancy embodied with multiple signal-relaying channels and feedback controls bestow great robustness and the reaction hubs seated at junctions of different paths announce their paramount importance through exquisite parameter management. The current investigation reveals intriguing general features of the organization of cell signaling networks and their relevance to biological function, which may find interesting applications in analysis, design and control of bio-networks. PMID:25951347

Computational modeling and statistical analyses on individual contact rate and exposure to disease in complex and confined transportation hubs

Science.gov (United States)

Wang, W. L.; Tsui, K. L.; Lo, S. M.; Liu, S. B.

2018-01-01

Crowded transportation hubs such as metro stations are thought as ideal places for the development and spread of epidemics. However, for the special features of complex spatial layout, confined environment with a large number of highly mobile individuals, it is difficult to quantify human contacts in such environments, wherein disease spreading dynamics were less explored in the previous studies. Due to the heterogeneity and dynamic nature of human interactions, increasing studies proved the importance of contact distance and length of contact in transmission probabilities. In this study, we show how detailed information on contact and exposure patterns can be obtained by statistical analyses on microscopic crowd simulation data. To be specific, a pedestrian simulation model-CityFlow was employed to reproduce individuals' movements in a metro station based on site survey data, values and distributions of individual contact rate and exposure in different simulation cases were obtained and analyzed. It is interesting that Weibull distribution fitted the histogram values of individual-based exposure in each case very well. Moreover, we found both individual contact rate and exposure had linear relationship with the average crowd densities of the environments. The results obtained in this paper can provide reference to epidemic study in complex and confined transportation hubs and refine the existing disease spreading models.

Reviewing the Justice and Security Hub Modality as Piloted in Liberia

Directory of Open Access Journals (Sweden)

Rory Keane

2012-11-01

Full Text Available ‘The Republic of Bangui’ or ‘the Republic of Monrovia’ are phrases we sometimes hear from practitioners to describe post conflict countries where very few services exist outside the capital city. This is especially the case for security – the critical public good in post conflict countries. In response to the need to bring security services closer to the citizens who often need them most, the Government of Liberia and the United Nations are piloting a new approach financed by the UN Peacebuilding Fund (PBF – the so-called ‘Justice and Security Hubs’. The donor community and the United Nations are watching closely. If this works, there is indication from UN officials that the model could potentially be replicated in other settings such as the East of the Democratic Republic of the Congo (DRC, Haiti and the northern states of South Sudan. If the hub concept is capable of being adapted and successful elsewhere, the United Nations will not only have added a new instrument to its peacekeeping toolkit but will also firmly demonstrate how the UN Peacebuilding Fund can in essence be catalytic in fostering long-term and comprehensive approaches to peacebuilding. This practice note outlines the process of developing and constructing the first hub in Liberia, which is due to be partly operational by the end of 2012, and provides a prognosis on its chances for success.

Real-time defect detection on highly reflective curved surfaces

Science.gov (United States)

Rosati, G.; Boschetti, G.; Biondi, A.; Rossi, A.

2009-03-01

This paper presents an automated defect detection system for coated plastic components for the automotive industry. This research activity came up as an evolution of a previous study which employed a non-flat mirror to illuminate and inspect high reflective curved surfaces. According to this method, the rays emitted from a light source are conveyed on the surface under investigation by means of a suitably curved mirror. After the reflection on the surface, the light rays are collected by a CCD camera, in which the coating defects appear as shadows of various shapes and dimensions. In this paper we present an evolution of the above-mentioned method, introducing a simplified mirror set-up in order to reduce the costs and the complexity of the defect detection system. In fact, a set of plane mirrors is employed instead of the curved one. Moreover, the inspection of multiple bend radius parts is investigated. A prototype of the machine vision system has been developed in order to test this simplified method. This device is made up of a light projector, a set of plane mirrors for light rays reflection, a conveyor belt for handling components, a CCD camera and a desktop PC which performs image acquisition and processing. Like in the previous system, the defects are identified as shadows inside a high brightness image. At the end of the paper, first experimental results are presented.

Quiet High Speed Fan II (QHSF II): Final Report

Science.gov (United States)

Kontos, Karen; Weir, Don; Ross, Dave

2012-01-01

This report details the aerodynamic, mechanical, structural design and fabrication of a Honey Engines Quiet High Speed Fan II (lower hub/tip ratio and higher specific flow than the Baseline I fan). This fan/nacelle system incorporates features such as advanced forward sweep and an advanced integrated fan/fan exit guide vane design that provides for the following characteristics: (1) Reduced noise at supersonic tip speeds, in comparison to current state-of-the-art fan technology; (2) Improved aeroelastic stability within the anticipated operating envelope; and (3) Aerodynamic performance consistent with current state-of-the-art fan technology. This fan was fabricated by Honeywell and tested in the NASA Glenn 9- by 15-Ft Low Speed Wind Tunnel for aerodynamic, aeromechanical, and acoustic performance.

Interpatch foraging in honeybees-rational decision making at secondary hubs based upon time and motivation.

Science.gov (United States)

Najera, Daniel A; McCullough, Erin L; Jander, Rudolf

2012-11-01

For honeybees, Apis mellifera, the hive has been well known to function as a primary decision-making hub, a place from which foragers decide among various directions, distances, and times of day to forage efficiently. Whether foraging honeybees can make similarly complex navigational decisions from locations away from the hive is unknown. To examine whether or not such secondary decision-making hubs exist, we trained bees to forage at four different locations. Specifically, we trained honeybees to first forage to a distal site "CT" 100 m away from the hive; if food was present, they fed and then chose to go home. If food was not present, the honeybees were trained to forage to three auxiliary sites, each at a different time of the day: A in the morning, B at noon, and C in the afternoon. The foragers learned to check site CT for food first and then efficiently depart to the correct location based upon the time of day if there was no food at site CT. Thus, the honeybees were able to cognitively map motivation, time, and five different locations (Hive, CT, A, B, and C) in two spatial dimensions; these are the contents of the cognitive map used by the honeybees here. While at site CT, we verified that the honeybees could choose between 4 different directions (to A, B, C, and the Hive) and thus label it as a secondary decision-making hub. The observed decision making uncovered here is inferred to constitute genuine logical operations, involving a branched structure, based upon the premises of motivational state, and spatiotemporal knowledge.

Development of high burnup nuclear fuel technology

International Nuclear Information System (INIS)

Suk, Ho Chun; Kang, Young Hwan; Jung, Jin Gone; Hwang, Won; Park, Zoo Hwan; Ryu, Woo Seog; Kim, Bong Goo; Kim, Il Gone

1987-04-01

The objectives of the project are mainly to develope both design and manufacturing technologies for 600 MWe-CANDU-PHWR-type high burnup nuclear fuel, and secondly to build up the foundation of PWR high burnup nuclear fuel technology on the basis of KAERI technology localized upon the standard 600 MWe-CANDU- PHWR nuclear fuel. So, as in the first stage, the goal of the program in the last one year was set up mainly to establish the concept of the nuclear fuel pellet design and manufacturing. The economic incentives for high burnup nuclear fuel technology development are improvement of fuel utilization, backend costs plant operation, etc. Forming the most important incentives of fuel cycle costs reduction and improvement of power operation, etc., the development of high burnup nuclear fuel technology and also the research on the incore fuel management and safety and technologies are necessary in this country

Principles of neutron reflection

International Nuclear Information System (INIS)

Felcher, G.P.

1988-08-01

Neutron reflection is perhaps the most developed branch of slow neutrons optics, which in itself is a direct consequence of the undulatory nature of the neutron. After reviewing the basic types of interactions (nuclear and magnetic) between neutrons and matter, the formalism is introduced to calculate the reflectivity from a sample composed of stacked flat layers and, inversely, to calculate the stacking from reflectivity measurements. Finally, a brief survey of the applications of neutron reflection is given, both in technology and in fundamental research. 32 refs., 6 figs

Hubs and spokes of the lateral hypothalamus: cell types, circuits and behaviour

Science.gov (United States)

Bonnavion, Patricia; Mickelsen, Laura E.; Fujita, Akie; de Lecea, Luis

2016-01-01

Abstract The hypothalamus is among the most phylogenetically conserved regions in the vertebrate brain, reflecting its critical role in maintaining physiological and behavioural homeostasis. By integrating signals arising from both the brain and periphery, it governs a litany of behaviourally important functions essential for survival. In particular, the lateral hypothalamic area (LHA) is central to the orchestration of sleep–wake states, feeding, energy balance and motivated behaviour. Underlying these diverse functions is a heterogeneous assembly of cell populations typically defined by neurochemical markers, such as the well‐described neuropeptides hypocretin/orexin and melanin‐concentrating hormone. However, anatomical and functional evidence suggests a rich diversity of other cell populations with complex neurochemical profiles that include neuropeptides, receptors and components of fast neurotransmission. Collectively, the LHA acts as a hub for the integration of diverse central and peripheral signals and, through complex local and long‐range output circuits, coordinates adaptive behavioural responses to the environment. Despite tremendous progress in our understanding of the LHA, defining the identity of functionally discrete LHA cell types, and their roles in driving complex behaviour, remain significant challenges in the field. In this review, we discuss advances in our understanding of the neurochemical and cellular heterogeneity of LHA neurons and the recent application of powerful new techniques, such as opto‐ and chemogenetics, in defining the role of LHA circuits in feeding, reward, arousal and stress. From pioneering work to recent developments, we review how the interrogation of LHA cells and circuits is contributing to a mechanistic understanding of how the LHA coordinates complex behaviour. PMID:27302606

Unveiling Exception Handling Bug Hazards in Android Based on GitHub and Google Code Issues

NARCIS (Netherlands)

Coelho, R.; Almeida, L.; Gousios, G.; Van Deursen, A.

2015-01-01

This paper reports on a study mining the exception stack traces included in 159,048 issues reported on Android projects hosted in GitHub (482 projects) and Google Code (157 projects). The goal of this study is to investigate whether stack trace information can reveal bug hazards related to exception

Hypocretin as a Hub for Arousal and Motivation

Directory of Open Access Journals (Sweden)

Susan M. Tyree

2018-06-01

Full Text Available The lateral hypothalamus is comprised of a heterogeneous mix of neurons that serve to integrate and regulate sleep, feeding, stress, energy balance, reward, and motivated behavior. Within these populations, the hypocretin/orexin neurons are among the most well studied. Here, we provide an overview on how these neurons act as a central hub integrating sensory and physiological information to tune arousal and motivated behavior accordingly. We give special attention to their role in sleep-wake states and conditions of hyper-arousal, as is the case with stress-induced anxiety. We further discuss their roles in feeding, drug-seeking, and sexual behavior, which are all dependent on the motivational state of the animal. We further emphasize the application of powerful techniques, such as optogenetics, chemogenetics, and fiber photometry, to delineate the role these neurons play in lateral hypothalamic functions.

High-resolution seismic reflection study, Vacherie Dome

International Nuclear Information System (INIS)

1984-06-01

A high-resolution seismic reflection study, consisting of recording, processing, and interpreting four seismic reflection lines, was made at Vacherie Dome, Louisiana. The presumed shape of the dome, as pictured in the geologic area characterization report by Law Engineering Testing Company in 1982, was based largely on interpretation of gravity data, constrained by a few wells and exploration-type seismic profiles. The purpose of the study was to obtain refined profiles of the dome above -914 m (-3000 ft) elevation. Additional study had been recommended by Louisiana State University in 1967 and the Office of Nuclear Waste Isolation in 1981 because the interpreted size of Vacherie Dome was based on limited seismic and gravity data. Forty-eight traces of seismic data were recorded each time shots were made to generate energy. Twelve-fold, common-depth-point data were obtained using geophone stations spaced at 15-m (50-ft) intervals with shots at 30-m (100-ft) intervals. The time-sampling interval used was 1 ms. Processing intended to enhance resolution included iterative static corrections, deconvolution before stacking, and both time- and depth-migration. The locations of the steep dome sides were inferred primarily from terminations of strong reflections (migrated) from strata near the top of the upper and lower Cretaceous sections. This interpretation agrees closely with the presumed shape from the top of the dome to about -610 m (-2000 ft) elevation, but below this on three of the profiles, this interpretation indicates a steeper salt face than the presumed shape. The area reduction at -914 m (-3000 ft) elevation is estimated to be on the order of 20 percent. 10 references, 11 figures, 4 tables

High temperature vapors science and technology

CERN Document Server

Hastie, John

2012-01-01

High Temperature Vapors: Science and Technology focuses on the relationship of the basic science of high-temperature vapors to some areas of discernible practical importance in modern science and technology. The major high-temperature problem areas selected for discussion include chemical vapor transport and deposition; the vapor phase aspects of corrosion, combustion, and energy systems; and extraterrestrial high-temperature species. This book is comprised of seven chapters and begins with an introduction to the nature of the high-temperature vapor state, the scope and literature of high-temp

High technology revisited: definition and position

NARCIS (Netherlands)

Steenhuis, H.J.; de Bruijn, E.J.

2006-01-01

This paper proposes a new approach to defining high technology by distinguishing two different aspects. First, complexity, which is a more or less a `static' view on high technology and is applied to both the final product as well as the production process. Second, the newness, relates to a

Dynamic Migration Intentions and the Impact of Socio-Institutional Environments: A Transit Migration Hub in Turkey

NARCIS (Netherlands)

Wissink, M.J.; Düvell, F.; van Eerdewijk, A.

2013-01-01

Transit migration is generally defined by migrants having the intention to move onwards to a third country. Based on an empirical investigation in Izmir, a transit migration hub in Turkey, this paper critically discusses intentionality as a valid dimension in conceptualisations of transit migration.

Hewlett-Packard's Approaches to Full Color Reflective Displays

Science.gov (United States)

Gibson, Gary

2012-02-01

Reflective displays are desirable in applications requiring low power or daylight readability. However, commercial reflective displays are currently either monochrome or capable of only dim color gamuts. Low cost, high-quality color technology would be rapidly adopted in existing reflective display markets and would enable new solutions in areas such as retail pricing and outdoor digital signage. Technical breakthroughs are required to enable bright color gamuts at reasonable cost. Pixel architectures that rely on pure reflection from a single layer of side-by-side primary-color sub-pixels use only a fraction of the display area to reflect incident light of a given color and are, therefore, unacceptably dark. Reflective devices employing stacked color primaries offer the possibility of a somewhat brighter color gamut but can be more complex to manufacture. In this talk, we describe HP's successes in addressing these fundamental challenges and creating both high performance stacked-primary reflective color displays as well as inexpensive single layer prototypes that provide good color. Our stacked displays utilize a combination of careful light management techniques, proprietary high-contrast electro-optic shutters, and highly transparent active-matrix TFT arrays based on transparent metal oxides. They also offer the possibility of relatively low cost manufacturing through roll-to-roll processing on plastic webs. To create even lower cost color displays with acceptable brightness, we have developed means for utilizing photoluminescence to make more efficient use of ambient light in a single layer device. Existing reflective displays create a desired color by reflecting a portion of the incident spectrum while absorbing undesired wavelengths. We have developed methods for converting the otherwise-wasted absorbed light to desired wavelengths via tailored photoluminescent composites. Here we describe a single active layer prototype display that utilizes these materials

Client and event driven data hub system at CDF

International Nuclear Information System (INIS)

Kilminster, Ben; McFarland, Kevin; Vaiciulis, Tony; Matsunaga, Hiroyuki; Shimojima, Makoto

2001-01-01

The Consumer-Server Logger (CSL) system at the Collider Detector at Fermilab is a client and event driven data hub capable of receiving physics events from multiple connections, and logging them to multiple streams while distributing them to multiple online analysis programs (consumers). Its multiple-partitioned design allows data flowing through different paths of the detector sub-systems to be processed separately. The CSL system, using a set of internal memory buffers and message queues mapped to the location of events within its programs, and running on an SGI 2200 Server, is able to process at least the required 20 MB/s of constant event logging (75 Hz of 250 KB events) while also filtering up to 10 MB/s to consumers requesting specific types of events

Mega hub for intermodal transport - the planning of the most advanced container terminal in the world; Mega-Drehscheibe fuer den Kombinierten Verkehr - Planung des modernsten Containerbahnhofes der Welt

Energy Technology Data Exchange (ETDEWEB)

Franke, K.P. [Noell Stahl- und Maschinenbau GmbH, Wuerzburg (Germany). Abt. Hafentechnik

1998-12-31

The introduction of innovative mega hub systems for the operation of cargo trains is a promising starting point for increasing the efficiency of intermodal transport. A first mega hub as it is known has been planned for Northern Germany with its centre in Lehrte near Hannover. Instead of shunting the waggons, containers will be transferred from train to train at the mega hub. This is not only faster, but also more economical and thus more attractive to rail transport clients. No other known system can achieve such high transhipment/shunting capacities per surface unit. The design of the system guarantees the maximum degree of flexibility in transhipment operations. A high degree of automation will ensure the quality and speed of transhipment. The technical development of the fast transhipment system (FTS) by Noell has been completed. (orig.) [Deutsch] Ein vielversprechender Ansatz fuer die Steigerung der Leistungsfaehigkeit des Kombinierten Verkehrs (KV) ist die Einfuehrung von innovativen Drehscheibensystemen fuer den Betrieb der Cargo-Zuege. Eine erste sogenannte Mega-Drehscheibe wurde fuer den Norden Deutschlands mit Zentrum Lehrte bei Hannover geplant. Statt zu rangieren sollen in der Mega-Drehscheibe die Behaelter zwischen den Zuegen umsteigen. Das ist schneller, kostenguenstiger und damit attraktiver fuer den Bahnkunden. Darueber hinaus ist kein System bekannt, bei dem eine so hohe Umschlag-/Umstelleistung je Flaecheneinheit realisiert werden kann. Die Gestaltung der Anlage gewaehrt eine maximale Flexibilitaet im Umschlagbetrieb. Ein hoher Automatisierungsgrad wird Qualitaet und Schnelligkeit des Umschlages sichern. Die technische Entwicklung der Schnellumschlagtechnik seitens Noell ist abgeschlossen. (orig.)

Technologies for evaluating fish passage through turbines

Energy Technology Data Exchange (ETDEWEB)

Weiland, Mark A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, Thomas J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2003-10-01

This study evaluated the feasibility of two types of technologies to observe fish and near neutrally buoyant drogues as they move through hydropower turbines. Existing or reasonably modified light-emitting and ultrasonic technologies were used to observe flow patterns, the response of fish to flow, and interactions between fish and turbine structures with good spatial and temporal accuracy. This information can be used to assess the biological benefits of turbine design features such as reductions in gaps at the tips and hub of turbine runner blades, reshaping wicket gates and stay vanes, modifications to draft tube splitter piers, and design changes that enhance egress through the powerhouse and tailrace.

Education & Technology: Reflections on Computing in Classrooms.

Science.gov (United States)

Fisher, Charles, Ed.; Dwyer, David C., Ed.; Yocam, Keith, Ed.

This volume examines learning in the age of technology, describes changing practices in technology-rich classrooms, and proposes new ways to support teachers as they incorporate technology into their work. It commemorates the eleventh anniversary of the Apple Classrooms of Tomorrow (ACOT) Project, when Apple Computer, Inc., in partnership with a…

Fabrication of corner cube array retro-reflective structure with DLP-based 3D printing technology

Science.gov (United States)

Riahi, Mohammadreza

2016-06-01

In this article, the fabrication of a corner cube array retro-reflective structure is presented by using DLP-based 3D printing technology. In this additive manufacturing technology a pattern of a cube corner array is designed in a computer and sliced with specific software. The image of each slice is then projected from the bottom side of a reservoir, containing UV cure resin, utilizing a DLP video projector. The projected area is cured and attached to a base plate. This process is repeated until the entire part is made. The best orientation of the printing process and the effect of layer thicknesses on the surface finish of the cube has been investigated. The thermal reflow surface finishing and replication with soft molding has also been presented in this article.

Branding by Proxy? : How hubs market (or not) higher education systems globally: the example of Qatar

NARCIS (Netherlands)

Cremonini, Leon; Taylor, John; Papadimitriou, Antigoni

2017-01-01

This chapter proposes a framework to understand if and how hubs contribute to stronger positioning of higher education system in global competition, and uses the case of Qatar to draw conclusions. Increasingly, governments around the world invest in so-called “education hubs”, which host excellent

Structures and short linear motif of disordered transcription factor regions provide clues to the interactome of the cellular hub radical-induced cell death1

DEFF Research Database (Denmark)

O'Shea, Charlotte; Staby, Lasse; Bendsen, Sidsel Krogh

2017-01-01

Intrinsically disordered protein regions (IDRs) lack a well-defined three-dimensional structure, but often facilitate key protein functions. Some interactions between IDRs and folded protein domains rely on short linear motifs (SLiMs). These motifs are challenging to identify, but once found can...... point to larger networks of interactions, such as with proteins that serve as hubs for essential cellular functions. The stress-associated plant protein Radical-Induced Cell Death1 (RCD1) is one such hub, interacting with many transcription factors via their flexible IDRs. To identify the SLiM bound......046 formed different structures or were fuzzy in the complexes. These findings allow us to present a model of the stress-associated RCD1-transcription factor interactome and to contribute to the emerging understanding of the interactions between folded hubs and their intrinsically disordered partners....

X-ray reflectivity measurements of liquid/solid interfaces under high hydrostatic pressure conditions.

Science.gov (United States)

Wirkert, Florian J; Paulus, Michael; Nase, Julia; Möller, Johannes; Kujawski, Simon; Sternemann, Christian; Tolan, Metin

2014-01-01

A high-pressure cell for in situ X-ray reflectivity measurements of liquid/solid interfaces at hydrostatic pressures up to 500 MPa (5 kbar), a pressure regime that is particularly important for the study of protein unfolding, is presented. The original set-up of this hydrostatic high-pressure cell is discussed and its unique properties are demonstrated by the investigation of pressure-induced adsorption of the protein lysozyme onto hydrophobic silicon wafers. The presented results emphasize the enormous potential of X-ray reflectivity studies under high hydrostatic pressure conditions for the in situ investigation of adsorption phenomena in biological systems.

Researching Higher Education in "Asia's Global Education Hub": Trends and Issues in Singapore

Science.gov (United States)

Lee, Michael H.

2016-01-01

Higher education studies as a field of academic research has become more developed and important in Singapore since the 1980s when the city-state placed more emphasis on reforming and restructuring its higher education sector to achieve the status of "Asia's global education hub". The past few decades witnessed a more significant growth…

Basic Microvascular Anastomosis Simulation Hub Microsurgery Course: An Innovative Competency-Based Approach to Microsurgical Training for Early Year's Plastic Surgery Trainees.

Science.gov (United States)

Ali, Stephen

2018-04-01

Early year's plastic surgery trainees are faced with a large choice of microsurgery courses to select from. In the context of dwindling study budgets and busy on-call rotas, the pressure to select a high yield course that delivers value for money is of paramount importance.The Basic Microvascular Anastomosis Simulation Hub Microsurgery Course is a GBP £600 (US $790) 5-day 40-hour course based at Barts and The London School of Medicine and Dentistry increasing in popularity among junior trainees to fit this brief.

Wind turbines - facts from 20 years of technological progress

Energy Technology Data Exchange (ETDEWEB)

Hansen, L H; Dannemand Andersen, P [Risoe Ntaional Lab., Roskilde (Denmark)

1999-03-01

The first Danish commercial wind turbines were installed in the late 1970s. Over the last 20 years the Danish wind turbine market has been relatively stable concerning annual installations, and the wind turbine technology has been able to develop continuously. This gives a unique time track for technology analysts. The aim of this paper is to extract reliable information on this time track from existing archives and statistics. Seven generations of wind turbine technology have been identified mainly based on `characteristic` rotor diameters. The technological development of each generation is described using indicators such as: market share in Denmark, generator size, rotor diameter, hub height, electricity production and productivity. Economical indicators comprise: costs of turbine and standard foundation. (au)

Wind turbines - facts from 20 years of technological progress

International Nuclear Information System (INIS)

Hansen, L.H.; Dannemand Andersen, P.

1999-01-01

The first Danish commercial wind turbines were installed in the late 1970s. Over the last 20 years the Danish wind turbine market has been relatively stable concerning annual installations, and the wind turbine technology has been able to develop continuously. This gives a unique time track for technology analysts. The aim of this paper is to extract reliable information on this time track from existing archives and statistics. Seven generations of wind turbine technology have been identified mainly based on 'characteristic' rotor diameters. The technological development of each generation is described using indicators such as: market share in Denmark, generator size, rotor diameter, hub height, electricity production and productivity. Economical indicators comprise: costs of turbine and standard foundation. (au)

Modular, Reconfigurable, High-Energy Technology Development

Science.gov (United States)

Carrington, Connie; Howell, Joe

2006-01-01

The Modular, Reconfigurable High-Energy (MRHE) Technology Demonstrator project was to have been a series of ground-based demonstrations to mature critical technologies needed for in-space assembly of a highpower high-voltage modular spacecraft in low Earth orbit, enabling the development of future modular solar-powered exploration cargo-transport vehicles and infrastructure. MRHE was a project in the High Energy Space Systems (HESS) Program, within NASA's Exploration Systems Research and Technology (ESR&T) Program. NASA participants included Marshall Space Flight Center (MSFC), the Jet Propulsion Laboratory (JPL), and Glenn Research Center (GRC). Contractor participants were the Boeing Phantom Works in Huntsville, AL, Lockheed Martin Advanced Technology Center in Palo Alto, CA, ENTECH, Inc. in Keller, TX, and the University of AL Huntsville (UAH). MRHE's technical objectives were to mature: (a) lightweight, efficient, high-voltage, radiation-resistant solar power generation (SPG) technologies; (b) innovative, lightweight, efficient thermal management systems; (c) efficient, 100kW-class, high-voltage power delivery systems from an SPG to an electric thruster system; (d) autonomous rendezvous and docking technology for in-space assembly of modular, reconfigurable spacecraft; (e) robotic assembly of modular space systems; and (f) modular, reconfigurable distributed avionics technologies. Maturation of these technologies was to be implemented through a series of increasingly-inclusive laboratory demonstrations that would have integrated and demonstrated two systems-of-systems: (a) the autonomous rendezvous and docking of modular spacecraft with deployable structures, robotic assembly, reconfiguration both during assembly and (b) the development and integration of an advanced thermal heat pipe and a high-voltage power delivery system with a representative lightweight high-voltage SPG array. In addition, an integrated simulation testbed would have been developed

[Ethical reflection on multidisciplinarity and confidentiality of information in medical imaging through new information and communication technologies].

Science.gov (United States)

Béranger, J; Le Coz, P

2012-05-01

Technological advances in medical imaging has resulted in the exponential increase of the number of images per examination, caused the irreversible decline of the silver film and imposed digital imaging. This digitization is a concept whose levels of development are multiple, reflecting the complexity of this process of technological change. Under these conditions, the use of medical information via new information and communication technologies is at the crossroads of several scientific approaches and several disciplines (medicine, ethics, law, economics, psychology, etc.) surrounding the information systems in health, doctor-patient relationship and concepts that are associated. Each day, these new information and communication technologies open up new horizons and the space of possibilities, spectacularly developing access to information and knowledge. In this perspective of digital technology emergence impacting the multidisciplinary use of health information systems, the ethical questions are numerous, especially on the preservation of privacy, confidentiality and security of medical data, and their accessibility and integrity. Copyright © 2012 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

Development of high-level radioactive waste treatment and conversion technologies 'Dry decontamination technology development for highly radioactive contaminants'

International Nuclear Information System (INIS)

Oh, Won Zin; Lee, K. W.; Won, H. J.; Jung, C. J.; Choi, W. K.; Kim, G. N.; Moon, J. K.

2001-04-01

The followings were studied through the project entitled 'Dry Decontamination Technology Development for Highly Radioactive Contaminants'. 1.Contaminant Characteristics Analysis of Domestic Nuclear Fuel Cycle Projects(NFCP) and Applicability Study of the Unit Dry-Decontamination Techniques A. Classification of contaminated equipments and characteristics analysis of contaminants B. Applicability study of the unit dry-decontamination techniques 2.Performance Evaluation of Unit Dry Decontamination Technique A. PFC decontamination technique B. CO2 decontamination technique C. Plasma decontamination technique 3.Development of Residual Radiation Assessment Methodology for High Radioactive Facility Decontamination A. Development of radioactive nuclide diffusion model on highly radioactive facility structure B. Obtainment of the procedure for assessment of residual radiation dose 4.Establishment of the Design Concept of Dry Decontamination Process Equipment Applicable to Highly Radioactive Contaminants 5.TRIGA soil unit decontamination technology development A. Development of soil washing and flushing technologies B. Development of electrokinetic soil decontamination technology

Reflective Writing for a Better Understanding of Scientific Concepts in High School

Science.gov (United States)

El-Helou, Joseph; Kalman, Calvin S.

2018-02-01

Science teachers can always benefit from efficient tools that help students to engage with the subject and understand it better without significantly adding to the teacher's workload nor requiring too much of class time to manage. Reflective writing is such a low-impact, high-return tool. What follows is an introduction to reflective writing, and more on its usefulness for teachers is given in the last part of this article.

Benefits of Two Turbine Rotor Diameters and Hub Heights in the Same Wind Farm

Energy Technology Data Exchange (ETDEWEB)

Dykes, Katherine L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Stanley, Andrew P. J. [Brigham Young University; Ning, Andrew [Brigham Young University

2018-01-12

Significant turbine-wake interactions greatly reduce power output in a wind farm. If different turbine hub heights and rotor diameters are included in the same wind farm, the wake interference in the farm will be reduced, resulting in a lower cost of energy (COE) than a farm with identical turbines. In this paper, we present a method to model wind farm COE in farms with hub heights and rotor diameters that vary across the wind farm. We also demonstrate how to optimize these wind farms to minimize COE. The results show that COE can be greatly reduced in wind farms with non-homogeneous turbines, especially when the turbines are spaced close together. For a unidirectional wind rose, including different turbine design in the wind farm has a similar decrease in COE to spreading the wind turbines farther apart. When the rotor diameter and hub height of the wind turbines in a farm are optimized uniformly, a COE decrease of 4% to 13% (depending on the grid spacing and wind shear exponent) is achieved compared to the baseline. When the rotor diameter and turbine heights are optimized non-uniformly, with two different diameters and heights throughout the farm, there is a COE decrease of 22% to 41% compared to the baseline. For a more spread wind rose with a dominant probability from the west, there is a COE decrease between 3% and 10% for uniformly optimized rotor diameter and height compared to the baseline. With two optimized rotor diameters and heights through the farm, a COE decrease of 3% to 19% is achieved. For a similar wind rose shifted such that the dominant wind direction is from the northwest, a COE decrease between 3% and 10% results from uniformly optimized wind turbines compared to the baseline. A COE decrease of 3% to 17% compared to the baseline occurs with two different turbines are optimized throughout the wind farm.

A novel virtual hub approach for multisource downstream service integration

Science.gov (United States)

Previtali, Mattia; Cuca, Branka; Barazzetti, Luigi

2016-08-01

A large development of downstream services is expected to be stimulated starting from earth observations (EO) datasets acquired by Copernicus satellites. An important challenge connected with the availability of downstream services is the possibility for their integration in order to create innovative applications with added values for users of different categories level. At the moment, the world of geo-information (GI) is extremely heterogeneous in terms of standards and formats used, thus preventing a facilitated access and integration of downstream services. Indeed, different users and data providers have also different requirements in terms of communication protocols and technology advancement. In recent years, many important programs and initiatives have tried to address this issue even on trans-regional and international level (e.g. INSPIRE Directive, GEOSS, Eye on Earth and SEIS). However, a lack of interoperability between systems and services still exists. In order to facilitate the interaction between different downstream services, a new architectural approach (developed within the European project ENERGIC OD) is proposed in this paper. The brokering-oriented architecture introduces a new mediation layer (the Virtual Hub) which works as an intermediary to bridge the gaps linked to interoperability issues. This intermediation layer de-couples the server and the client allowing a facilitated access to multiple downstream services and also Open Data provided by national and local SDIs. In particular, in this paper an application is presented integrating four services on the topic of agriculture: (i) the service given by Space4Agri (providing services based on MODIS and Landsat data); (ii) Gicarus Lab (providing sample services based on Landsat datasets) and (iii) FRESHMON (providing sample services for water quality) and services from a several regional SDIs.

Ethical reflection on multi-disciplinarity and confidentiality of information in medical imaging through new information and communication technologies

International Nuclear Information System (INIS)

Beranger, J.; Le Coz, P.

2012-01-01

Technological advances in medical imaging has resulted in the exponential increase of the number of images per examination, caused the irreversible decline of the silver film and imposed digital imaging. This digitization is a concept whose levels of development are multiple, reflecting the complexity of this process of technological change. Under these conditions, the use of medical information via new information and communication technologies is at the crossroads of several scientific approaches and several disciplines (medicine, ethics, law, economics, psychology, etc.) surrounding the information systems in health, doctor-patient relationship and concepts that are associated. Each day, these new information and communication technologies open up new horizons and the space of possibilities, spectacularly developing access to information and knowledge. In this perspective of digital technology emergence impacting the multidisciplinary use of health information systems, the ethical questions are numerous, especially on the preservation of privacy, confidentiality and security of medical data, and their accessibility and integrity. (authors)

The effect of hubs and shortcuts on fixation time in evolutionary graphs

Science.gov (United States)

Askari, Marziyeh; Moradi Miraghaei, Zeinab; Aghababaei Samani, Keivan

2017-07-01

How can a new species (like a gene, an idea, or a strategy) take over the whole of a population? This process, which is called fixation, is considerably affected by the structure of the population. There are two key quantities to quantify the fixation process, namely fixation probability and fixation time. Fixation probability has been vastly studied in recent years, but fixation time has not been completely explored, yet. This is because the discovery of a relationship between fixation time and network structure is quite challenging. In this paper we investigate this relationship for a number of well-known complex networks. We show that the existence of a few high-degree nodes (hubs) in the network results in a longer fixation time, while the existence of a few short-cuts decreases the fixation time. Furthermore we investigate the effect of network parameters, such as connection probability, on fixation time. We show that by increasing the density of edges, fixation time decreases for all types of studied networks. Finally, we survey the effect of rewiring probability in a Watts-Strogatz network on fixation time.

HIV and AIDS Data Hub for Asia Pacific: a regional tool to support strategic information needs

Directory of Open Access Journals (Sweden)

Ye Yu Shwe

2012-09-01

Full Text Available The 2011 global commitments towards controlling HIV made by Asia-Pacific countries require considerable improvement in strategic information and response tracking. The HIV and AIDS Data Hub can serve as an important tool for stakeholders with its regional database of subnational indicators, web site and data synthesis capacity.

The diminishing role of hubs in dynamical processes on complex networks.

Science.gov (United States)