WorldWideScience

Sample records for high-quality manual labor

  1. Quality management manual for production of high quality cassava flour

    Dziedzoave, Nanam Tay; Abass, Adebayo Busura; Amoa-Awua, Wisdom K.

    The high quality cassava flour (HQCF) industry has just started to evolve in Africa and elsewhere. The sustainability of the growing industry, the profitability of small- and medium-scale enterprises (SMEs) that are active in the industry and good-health of consumers can best be guaranteed through...... the adoption of proper quality and food safety procedures. Cassava processing enterprises involved in the productionof HQCF must therefore be commited to the quality and food safety of the HQCF. They must have the right technology, appropriate processing machhinery, standard testing instruments...... and the necessary technical expertise. This quality manual was therefore developed to guide small- to medium-scale cassava in the design and implematation of Hazard Analysis Critical Control Point (HACCP) system and Good manufacturing Practices (GMP) plans for HQCF production. It describes the HQCF production...

  2. No-cost manual method for preparation of tissue microarrays having high quality comparable to semiautomated methods.

    Foda, Abd Al-Rahman Mohammad

    2013-05-01

    Manual tissue microarray (TMA) construction had been introduced to avoid the high cost of automated and semiautomated techniques. The cheapest and simplest technique for constructing manual TMA was that of using mechanical pencil tips. This study was carried out to modify this method, aiming to raise its quality to reach that of expensive ones. Some modifications were introduced to Shebl's technique. Two conventional mechanical pencil tips of different diameters were used to construct the recipient blocks. A source of mild heat was used, and blocks were incubated at 38°C overnight. With our modifications, 3 high-density TMA blocks were constructed. We successfully performed immunostaining without substantial tissue loss. Our modifications increased the number of cores per block and improved the stability of the cores within the paraffin block. This new, modified technique is a good alternative for expensive machines in many laboratories.

  3. Influence of Manual Labor at Work on Muscular Fitness and Its Relationship With Work Performance.

    Ryan, Eric D; Thompson, Brennan J; Sobolewski, Eric J

    2016-10-01

    The present study examined the influence of workplace manual labor on measures of muscular fitness, with a secondary aim to investigate the relationship between muscular fitness and work performance in blue-collar (BC) workers. Leg extension isokinetic strength at slow and fast velocities, hamstring and hip-flexor flexibility, and low back muscular endurance were examined in young and older BC workers and white-collar (WC) controls, while work performance was examined in the BC cohort. There were no differences in muscular fitness variables between BC and WC groups; however, the older men had lower low back muscular endurance (-43.0%) and strength at slow (-9.4%) and fast (-12.7%) velocities. Work performance was associated with strength at fast velocities (r = 0.633) in the older BC workers. Leg strength may influence work performance, with higher velocities becoming more important in older workers.

  4. Labor.

    Martz, Carlton

    2001-01-01

    This theme issue of the "Bill of Rights in Action" looks at labor issues. The first article examines the unionization efforts of the Wobblies in the United States at the beginning of the 20th century. The second article explores the protests of the Luddites during Britain's Industrial Revolution. The final article looks at whether…

  5. Effect of increased regulation on capital costs and manual labor requirements of nuclear power plants

    Paik, S.; Schriver, W.R.

    1981-01-01

    An attempt is made to explain the impact of increasing governmental regulation on capital costs and labor requirements for constructing light water reactor (LWR) electric power plants. The principal factors contributing to these increases are: (1) market conditions and (2) increased regulation. General market conditions include additional costs attributable to price inflation of equipment, material, labor, and the increased cost of money. The central objective of this work is to estimate the impact of increasing regulation on plant costs and, conversely, on output. To do this it is necessary to isolate two opposing sets of forces which have been in operation during the period of major regulatory expansion: learning based upon plant design experience and economies of scale with increasing size (generating capacity) of newer plants. Conceptual models are specified to capture the independent effects of increasing regulation, learning, and economies of scale. Empirical results were obtained by estimating the models on data collected from industry experience during the 1967-1980 period. 23 refs

  6. Functional Outcome With Percutaneous Ilio-sacral Screw Fixation For Posterior Pelvic Ring Injuries In Patients Involved In Heavy Manual Laboring

    Abhishek SM

    2015-11-01

    Full Text Available Introduction: Unstable posterior pelvic ring injuries are best treated with operative methods due to better post-op functional score. Our patient cohort was involved in heavy manual laboring frequently required ground level work in their activities of daily living. There are very few outcome studies dealing exclusively with such patients. Materials & Methods: Forty one patients who were treated with percutaneous sacroiliac screw fixation under fluoroscopic guidance and were followed-up for at least one year were analyzed retrospectively for functional outcome using the Majeed score. Results: Twenty one (51.22% and thirteen (31.70% patients were found to be in excellent and good categories respectively and majority of the patients (thirty/73.17% were able to return to their original occupation with or without minor adjustments. Conclusion: Percutaneous ilio-sacral screw fixation for posterior pelvic unstable injuries is an acceptable mode of treatment in patients involved in heavy manual laboring.

  7. Projections of cost and on-site manual-labor requirements for constructing electric-generating plants, 1980-1990

    1982-02-01

    This report represents part of a continuing effort by the Federal Government to forecast the capital and labor required for constructing electric generating capacity additions necessary to accommodate projected economic and population growth in the US and its regions. Information is included on anticipated additions to electric generating capacity, labor requirements for these additions, capital cost requirements, and forecasting models. Coal-fired, nuclear, hydro, and pumped storage power plants are considered in these forecasts

  8. Elaboración y aplicación de un manual para estudiantes de la UPS Sede Cuenca, con aspectos relacionados a un correcto desenvolvimiento dentro del proceso de una entrevista laboral, jul/2011-dic/2011

    Delgado Quispe, Ximena Alexandra

    2011-01-01

    El producto intitulado "Elaboración y aplicación de un manual para estudiantes de la UPS - Sede Cuenca, con aspectos relacionados a un correcto desenvolvimiento dentro del proceso de una Entrevista Laboral", contiene temas exclusivamente relacionados con información muy útil y actualizada, para los estudiantes y futuros profesionales, acerca de todos los requerimientos que dentro del ámbito laboral se exige, dada la tecnología y el entorno altamente competitivo en el que nos desenvolvemos, se...

  9. Migrant labor and wear-out in manual sugarcane harvesting in São Paulo, Brazil Trabalho e desgaste de migrantes no corte manual de cana de açúcar no Estado de São Paulo, Brasil

    Verônica Gronau Luz

    2012-10-01

    Full Text Available The scope of this paper is to describe the work of manual sugarcane harvesters, assessing the nutritional behavior and body composition between the beginning and the end of the harvest. A descriptive longitudinal study was made of harvesters in Piracicaba, São Paulo, Brazil, who answered a socio-demographic questionnaire and authorized measurement of Body Mass Index, Body Fat Percentage and Arm Muscle Circumference at three stages. Creatine kinase on the skeletal isoform, C-reactive protein and plasma urea were measured at the end of the harvest. Thirty male migrant harvesters with ages ranging from 18 to 44 from the Northeast (Ceará were assessed over a nine-month period. The workers suffered significant body fat and weight loss in the first half of the harvest. Eighteen workers had abnormal levels of creatine kinase and four - out of 24 who had donated blood - had altered urea levels. Sugarcane harvesting work causes weight and body fat loss and gains in the lean body mass index, which suffers wear-out when working on consecutive harvests. It can also cause changes in biochemical markers of chronic systemic inflammation. Further studies will make it possible to comprehend the relationships between stress, wear-out, labor longevity and health in sugarcane harvesting.Descrever o trabalho de cortadores manuais de cana de açúcar avaliando o comportamento nutricional e a composição corporal do início ao final da safra. Estudo descritivo longitudinal de cortadores na região de Piracicaba, São Paulo, Brasil, por meio de um questionário sociodemográfico e antropométrico que permitiu medir Índice de Massa Corporal, Percentual de Gordura Corporal e Circunferência Muscular do Braço em três momentos. Ao final da safra foi dosada a Creatina Quinase na isoforma esquelética, proteína C reativa e ureia plasmática. Durante nove meses, 30 homens safristas migrantes nordestinos (Ceará, com idade de 18 a 44 anos foram estudados. Os

  10. Labor Induction

    f AQ FREQUENTLY ASKED QUESTIONS FAQ154 LABOR, DELIVERY, AND POSTPARTUM CARE Labor Induction • What is labor induction? • Why is labor induced? • What is the Bishop score? • What is “ripening ...

  11. Preterm Labor

    Preterm labor is labor that starts before 37 completed weeks of pregnancy. It can lead to premature birth. Premature babies may face serious health risks. Symptoms of preterm labor include Contractions every 10 minutes or more often ...

  12. Labor Force

    Occupational Outlook Quarterly, 2010

    2010-01-01

    The labor force is the number of people aged 16 or older who are either working or looking for work. It does not include active-duty military personnel or institutionalized people, such as prison inmates. Quantifying this total supply of labor is a way of determining how big the economy can get. Labor force participation rates vary significantly…

  13. Labor Force

    Occupational Outlook Quarterly, 2012

    2012-01-01

    The labor force is the number of people ages 16 or older who are either working or looking for work. It does not include active-duty military personnel or the institutionalized population, such as prison inmates. Determining the size of the labor force is a way of determining how big the economy can get. The size of the labor force depends on two…

  14. Fast High-Quality Noise

    Frisvad, Jeppe Revall; Wyvill, Geoff

    2007-01-01

    At the moment the noise functions available in a graphics programmer's toolbox are either slow to compute or they involve grid-line artifacts making them of lower quality. In this paper we present a real-time noise computation with no grid-line artifacts or other regularity problems. In other words......, we put a new tool in the box that computes fast high-quality noise. In addition to being free of artifacts, the noise we present does not rely on tabulated data (everything is computed on the fly) and it is easy to adjust quality vs. quantity for the noise. The noise is based on point rendering (like...... spot noise), but it extends to more than two dimensions. The fact that it is based on point rendering makes art direction of the noise much easier....

  15. Camp Health Aide Manual = Manual para trabajadores de salud.

    Robinson, June Grube; And Others

    This bilingual manual serves as a textbook for migrant Camp Health Aides. Camp Health Aides are members of migrant labor camps enlisted to provide information about health and social services to migrant workers and their families. The manual is divided into 12 tabbed sections representing lessons. Teaching notes printed on contrasting paper…

  16. Availability of high quality weather data measurements

    Andersen, Elsa; Johansen, Jakob Berg; Furbo, Simon

    In the period 2016-2017 the project “Availability of high quality weather data measurements” is carried out at Department of Civil Engineering at the Technical University of Denmark. The aim of the project is to establish measured high quality weather data which will be easily available...... for the building energy branch and the solar energy branch in their efforts to achieve energy savings and for researchers and students carrying out projects where measured high quality weather data are needed....

  17. Preterm labor

    Jørgensen, Jan Stener; Weile, Louise Katrine Kjær; Lamont, Ronald Francis

    2014-01-01

    While tocolytic therapy may not be indicated in all cases of spontaneous preterm labor (SPTL), the evidence that they are superior to placebo is robust. The perfect tocolytic that is 100% efficacious and 100% safe does not exist and efforts should continue to develop and introduce safer and more...... and arrange in utero transfer to a center with neonatal intensive care facilities, both of which reduce neonatal mortality and morbidity. Few tocolytics (β₂-agonists and atosiban) are licensed for use as tocolytics and only one was developed specifically to treat preterm labor (atosiban). Accordingly, most...

  18. Fabrication of high-quality brazed joints

    Orlov, A.V.

    1980-01-01

    Problem of ensuring of joint high-quality when brazing different parts in power engineering is considered. To obtain high-quality joints it is necessary to correctly design brazed joint and to choose a gap width, overlap length and fillet radius; to clean up carefully the surfaces to be brazed and fix them properly one relative to another; to apply a solder so as to provide its flowing into the gap and sticking in it; to exactly regulate thermal conditions of brazing. High quality and reliability of brazed joints are ensured by the application of solders based on noble metals, and cheap solders based on nickel, manganese and copper. Joints brazed with nickel base solders may operate at temperatures as high as 888 deg C

  19. A comparison of breast stimulation and intravenous oxytocin for the augmentation of labor.

    Curtis, P; Resnick, J C; Evens, S; Thompson, C J

    1999-06-01

    Breast stimulation to augment labor has been used for centuries in tribal societies and by midwives. In recent years it has been shown to be effective in ripening the cervix, inducing labor, and as an alternative to oxytocin for the contraction stress test. This study compared the effectiveness of breast stimulation with oxytocin infusion in augmenting labor. Women admitted to the labor ward were eligible for the study if they had inadequate labor with premature rupture of the membranes and met inclusion criteria. They were assigned to oxytocin augmentation or breast stimulation (manual or pump), and were switched to oxytocin in the event of method failure. Outcomes included time to delivery, intervention to delivery, proportion of spontaneous deliveries, and Apgar scores. One hundred participants were needed in each arm of the study to demonstrate a 2- to 3-hour difference in delivery time, with a power of 80 percent. Analysis was performed on 79 women, of whom 49 were in the breast stimulation group and 30 in the oxytocin group. Sixty-five percent of the participants failed breast stimulation and were switched to oxytocin infusion. Although augmentation start to delivery was shorter for the oxytocin group (p < 0.001), no differences in total labor time occurred between the groups. Nulliparas receiving breast stimulation had more spontaneous (relative risk 1.7, p = 0.04), and fewer instrumental deliveries than those receiving oxytocin (relative risk 0.2, p = 0.02). No significant differences in adverse fetal outcomes occurred between the study groups. The small number of participants and a variety of problems with the conduct of the study prevented the formulation of reliable conclusions from the results. However, the study provided important insights into the feasibility and problems of developing a high-quality randomized trial of augmentation by breast stimulation.

  20. Child Labor

    Udry, Christopher

    2003-01-01

    In recent years, there has been an astonishing proliferation of empirical work on child labor. An Econlit search of keywords "child lab*r" reveals a total of 6 peer reviewed journal articles between 1980 and 1990, 65 between 1990 and 2000, and 143 in the first five years of the present decade. The purpose of this essay is to provide a detailed overview of the state of the recent empirical literature on why and how children work as well as the consequences of that work. Section 1 defines terms...

  1. Producing high-quality slash pine seeds

    James Barnett; Sue Varela

    2003-01-01

    Slash pine is a desirable species. It serves many purposes and is well adapted to poorly drained flatwoods and seasonally flooded areas along the lower Coastal Plain of the Southeastern US. The use of high-quality seeds has been shown to produce uniform seedlings for outplanting, which is key to silvicultural success along the Coastal Plain and elsewhere. We present...

  2. Fatiga laboral

    Useche Mora Luz Graciela

    1992-06-01

    Full Text Available

    La fatiga laboral es un fenómeno complejo y muy común en los ambientes de trabajo especialmente en aquellos que requieren de una alta carga física y en los que son utilizadas complicadas tecnologías que presentan al hombre máximas exigencias, obligándolo a trabajar más allá de sus posibilidades psicofisiológicas y en condiciones muchas veces nocivas. En este sentido, el presente artículo se propone presentar el análisis de aspectos fundamentales de la fatiga que requieren ser conocidos por todo trabajador, con el fin de evitar situaciones de morbilidad y, por qué no decirlo, hasta de muerte.

     

  3. High-quality compressive ghost imaging

    Huang, Heyan; Zhou, Cheng; Tian, Tian; Liu, Dongqi; Song, Lijun

    2018-04-01

    We propose a high-quality compressive ghost imaging method based on projected Landweber regularization and guided filter, which effectively reduce the undersampling noise and improve the resolution. In our scheme, the original object is reconstructed by decomposing of regularization and denoising steps instead of solving a minimization problem in compressive reconstruction process. The simulation and experimental results show that our method can obtain high ghost imaging quality in terms of PSNR and visual observation.

  4. Manual Therapy

    Hakgüder, Aral; Kokino, Siranuş

    2002-01-01

    Manual therapy has been used in the treatment of pain and dysfunction of spinal and peripheral joints for more than a hundred years. Manual medicine includes manipulation, mobilization, and postisometric relaxation techniques. The aim of manual therapy is to enhance restricted movement caused by blockage of joints keeping postural balance, restore function and maintain optimal body mechanics. Anatomic, biomechanical, and neurophysiological evaluations of the leucomotor system is essential for...

  5. OSH technical reference manual

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  6. Preterm Labor and Birth

    ... Facebook Twitter Pinterest Email Print Preterm Labor and Birth In general, a normal human pregnancy lasts about ... is called preterm labor (or premature labor). A birth that occurs before 37 weeks is considered a ...

  7. High quality transportation fuels from renewable feedstock

    Lindfors, Lars Peter

    2010-09-15

    Hydrotreating of vegetable oils is novel process for producing high quality renewable diesel. Hydrotreated vegetable oils (HVO) are paraffinic hydrocarbons. They are free of aromatics, have high cetane numbers and reduce emissions. HVO can be used as component or as such. HVO processes can also be modified to produce jet fuel. GHG savings by HVO use are significant compared to fossil fuels. HVO is already in commercial production. Neste Oil is producing its NExBTL diesel in two plants. Production of renewable fuels will be limited by availability of sustainable feedstock. Therefore R and D efforts are made to expand feedstock base further.

  8. Boiling curve in high quality flow boiling

    Shiralkar, B.S.; Hein, R.A.; Yadigaroglu, G.

    1980-01-01

    The post dry-out heat transfer regime of the flow boiling curve was investigated experimentally for high pressure water at high qualities. The test section was a short round tube located downstream of a hot patch created by a temperature controlled segment of tubing. Results from the experiment showed that the distance from the dryout point has a significant effect on the downstream temperatures and there was no unique boiling curve. The heat transfer coefficients measured sufficiently downstream of the dryout point could be correlated using the Heineman correlation for superheated steam, indicating that the droplet deposition effects could be neglected in this region

  9. Regulations and Procedures Manual

    Young, Lydia J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-07-25

    The purpose of the Regulations and Procedures Manual (RPM) is to provide LBNL personnel with a reference to University and Lawrence Berkeley National Laboratory (LBNL or Laboratory) policies and regulations by outlining normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory organizations. Much of the information in this manual has been condensed from detail provided in LBNL procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. RPM sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the LBNL organization responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which organization is responsible for a policy, please contact Requirements Manager Lydia Young or the RPM Editor.

  10. Regulations and Procedures Manual

    Young, Lydia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2010-09-30

    The purpose of the Regulations and Procedures Manual (RPM) is to provide Laboratory personnel with a reference to University and Lawrence Berkeley National Laboratory policies and regulations by outlining the normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory departments. Much of the information in this manual has been condensed from detail provided in Laboratory procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. The sections on personnel apply only to employees who are not represented by unions. Personnel policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the department responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which department should be called, please contact the Associate Laboratory Director of Operations.

  11. Structures manual

    2001-01-01

    This manual was written as a guide for use by design personnel in the Vermont Agency of Transportation Structures Section. This manual covers the design responsibilities of the Section. It does not cover other functions that are a part of the Structu...

  12. Quality Manual

    Koch, Michael

    The quality manual is the “heart” of every management system related to quality. Quality assurance in analytical laboratories is most frequently linked with ISO/IEC 17025, which lists the standard requirements for a quality manual. In this chapter examples are used to demonstrate, how these requirements can be met. But, certainly, there are many other ways to do this.

  13. Method for synthesis of high quality graphene

    Lanzara, Alessandra [Piedmont, CA; Schmid, Andreas K [Berkeley, CA; Yu, Xiaozhu [Berkeley, CA; Hwang, Choonkyu [Albany, CA; Kohl, Annemarie [Beneditkbeuern, DE; Jozwiak, Chris M [Oakland, CA

    2012-03-27

    A method is described herein for the providing of high quality graphene layers on silicon carbide wafers in a thermal process. With two wafers facing each other in close proximity, in a first vacuum heating stage, while maintained at a vacuum of around 10.sup.-6 Torr, the wafer temperature is raised to about 1500.degree. C., whereby silicon evaporates from the wafer leaving a carbon rich surface, the evaporated silicon trapped in the gap between the wafers, such that the higher vapor pressure of silicon above each of the wafers suppresses further silicon evaporation. As the temperature of the wafers is raised to about 1530.degree. C. or more, the carbon atoms self assemble themselves into graphene.

  14. Breeding and maintaining high-quality insects

    Jensen, Kim; Kristensen, Torsten Nygård; Heckmann, Lars-Henrik

    2017-01-01

    Insects have a large potential for sustainably enhancing global food and feed production, and commercial insect production is a rising industry of high economic value. Insects suitable for production typically have fast growth, short generation time, efficient nutrient utilization, high...... reproductive potential, and thrive at high density. Insects may cost-efficiently convert agricultural and industrial food by-products into valuable protein once the technology is finetuned. However, since insect mass production is a new industry, the technology needed to efficiently farm these animals is still...... in a starting phase. Here, we discuss the challenges and precautions that need to be considered when breeding and maintaining high-quality insect populations for food and feed. This involves techniques typically used in domestic animal breeding programs including maintaining genetically healthy populations...

  15. High Quality Virtual Reality for Architectural Exhibitions

    Kreutzberg, Anette

    2016-01-01

    This paper will summarise the findings from creating and implementing a visually high quality Virtual Reality (VR) experiment as part of an international architecture exhibition. It was the aim to represent the architectural spatial qualities as well as the atmosphere created from combining natural...... and artificial lighting in a prominent not yet built project. The outcome is twofold: Findings concerning the integration of VR in an exhibition space and findings concerning the experience of the virtual space itself. In the exhibition, an important aspect was the unmanned exhibition space, requiring the VR...... experience to be self-explanatory. Observations of different visitor reactions to the unmanned VR experience compared with visitor reactions at guided tours with personal instructions are evaluated. Data on perception of realism, spatial quality and light in the VR model were collected with qualitative...

  16. Biosafety Manual

    King, Bruce W.

    2010-05-18

    Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may cause disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.

  17. Develpment of quality assurance manual for fabrication of DUPIC fuel

    Lee, Young Gun; Lee, J. W.; Kim, S. S. and others

    2001-09-01

    The Quality Assurance Manual for the fabrication of DUPIC fuel with high quality was developed. The Quality Assurance Policy established by this manual is to assure that the DUPIC fuel element supplied to customer conform to the specified requirements of customer, applicable codes and standards. The management of KAERI is committed to implementation and maintenance of the program described by this manual. This manual describes the quality assurance program for DUPIC fuel fabrication to comply with CAN3-Z299.2-85 to the extent as needed and appropriate. This manual describes the methods which DUPIC Fuel Development Team(DFDT) personnel must follow to achieve and assure high quality of our product. This manual also describes the quality management system applicable to the activities performed at DFDT.

  18. Develpment of quality assurance manual for fabrication of DUPIC fuel

    Lee, Young Gun; Lee, J. W.; Kim, S. S. and others

    2001-09-01

    The Quality Assurance Manual for the fabrication of DUPIC fuel with high quality was developed. The Quality Assurance Policy established by this manual is to assure that the DUPIC fuel element supplied to customer conform to the specified requirements of customer, applicable codes and standards. The management of KAERI is committed to implementation and maintenance of the program described by this manual. This manual describes the quality assurance program for DUPIC fuel fabrication to comply with CAN3-Z299.2-85 to the extent as needed and appropriate. This manual describes the methods which DUPIC Fuel Development Team(DFDT) personnel must follow to achieve and assure high quality of our product. This manual also describes the quality management system applicable to the activities performed at DFDT

  19. Recruiting and retaining high-quality teachers in rural areas.

    Monk, David H

    2007-01-01

    In examining recruitment and retention of teachers in rural areas, David Monk begins by noting the numerous possible characteristics of rural communities--small size, sparse settlement, distance from population concentrations, and an economic reliance on agricultural industries that are increasingly using seasonal and immigrant workers to minimize labor costs. Many, though not all, rural areas, he says, are seriously impoverished. Classes in rural schools are relatively small, and teachers tend to report satisfaction with their work environments and relatively few problems with discipline. But teacher turnover is often high, and hiring can be difficult. Monk observes that rural schools have a below-average share of highly trained teachers. Compensation in rural schools tends to be low, perhaps because of a lower fiscal capacity in rural areas, thus complicating efforts to attract and retain teachers. Several student characteristics, including relatively large shares of students with special needs and with limited English skills and lower shares of students attending college, can also make it difficult to recruit and retain high-quality teachers. Other challenges include meeting the needs of highly mobile children of low-income migrant farm workers. With respect to public policy, Monk asserts a need to focus on a subcategory of what might be called hard-to-staff rural schools rather than to develop a blanket set of policies for all rural schools. In particular, he recommends a focus on such indicators as low teacher qualifications, teaching in fields far removed from the area of training, difficulty in hiring, high turnover, a lack of diversity among teachers in the school, and the presence of migrant farm workers' children. Successful efforts to stimulate economic growth in these areas would be highly beneficial. He also calls attention to the potential for modern telecommunication and computing technologies to offset some of the drawbacks associated with teaching

  20. GRACE manual

    Ishikawa, T.; Kawabata, S.; Shimizu, Y.; Kaneko, T.; Kato, K.; Tanaka, H.

    1993-02-01

    This manual is composed of three kinds of objects, theoretical background for calculating the cross section of elementary process, usage and technical details of the GRACE system. Throughout this manual we take the tree level process e + e - → W + W - γ as an example, including the e ± -scalar boson interactions. The real FORTRAN source code for this process is attached in the relevant sections as well as the results of calculation, which might be a great help for understanding the practical use of the system. (J.P.N.)

  1. Optical studies of high quality synthetic diamond

    Sharp, S.J.

    1999-01-01

    This thesis is concerned with the study of fundamental and defect induced optical properties of synthetic diamond grown using high pressure, high temperature (HPHT) synthesis or chemical vapour deposition (CVD). The primary technique used for investigation is cathodoluminescence (including imaging and decay-time measurements) in addition to other forms of optical spectroscopy. This thesis is timely in that the crystallinity and purity of synthetic diamond has increased ten fold over the last few years. The diamond exciton emission, which is easily quenched by the presence of defects, is studied in high quality samples in detail. In addition the ability now exists to engineer the isotopic content of synthetic diamond to a high degree of accuracy. The experimental chapters are divided as follows: Chapter 2: High resolution, low temperature spectra reveal a splitting of the free-exciton phonon recombination emission peaks and the bound-exciton zero phonon line. Included are measurements of the variation in intensity and decay-time as a function of temperature. Chapter 3: The shift in energy of the phonon-assisted free-exciton phonon replicas with isotopic content has been measured. The shift is in agreement with the results of interatomic force model for phonon scattering due to isotope disorder. Chapter 4: A study of the shift in energy with isotopic content of the diamond of the GR1 band due to the neutral vacancy has allowed a verification of the theoretical predictions due to the Jahn Teller effect. Chapter 5: The spatial distribution of the free-exciton luminescence is studied in HPHT synthetic and CVD diamond. A variation in intensity with distance from the surface is interpreted as a significant non-radiative loss of excitons to the surface. Chapter 6: The decay-times of all known self-interstitial related centres have been measured in order to calculate the concentration of these centres present in electron irradiated diamond. (author)

  2. High Quality Data for Grid Integration Studies

    Clifton, Andrew; Draxl, Caroline; Sengupta, Manajit; Hodge, Bri-Mathias

    2017-01-22

    As variable renewable power penetration levels increase in power systems worldwide, renewable integration studies are crucial to ensure continued economic and reliable operation of the power grid. The existing electric grid infrastructure in the US in particular poses significant limitations on wind power expansion. In this presentation we will shed light on requirements for grid integration studies as far as wind and solar energy are concerned. Because wind and solar plants are strongly impacted by weather, high-resolution and high-quality weather data are required to drive power system simulations. Future data sets will have to push limits of numerical weather prediction to yield these high-resolution data sets, and wind data will have to be time-synchronized with solar data. Current wind and solar integration data sets are presented. The Wind Integration National Dataset (WIND) Toolkit is the largest and most complete grid integration data set publicly available to date. A meteorological data set, wind power production time series, and simulated forecasts created using the Weather Research and Forecasting Model run on a 2-km grid over the continental United States at a 5-min resolution is now publicly available for more than 126,000 land-based and offshore wind power production sites. The National Solar Radiation Database (NSRDB) is a similar high temporal- and spatial resolution database of 18 years of solar resource data for North America and India. The need for high-resolution weather data pushes modeling towards finer scales and closer synchronization. We also present how we anticipate such datasets developing in the future, their benefits, and the challenges with using and disseminating such large amounts of data.

  3. Labor Education in America

    Carlson, Kenneth D.

    1971-01-01

    Labor education reflects the pragmaticism of American culture and supports the system. It emphasizes leadership training, loyalty building, and political education. The control of labor education is centralized in union headquarters. (VW)

  4. Labor Force Participation Rate

    City and County of Durham, North Carolina — This thematic map presents the labor force participation rate of working-age people in the United States in 2010. The 2010 Labor Force Participation Rate shows the...

  5. Signs of Labor

    ... Careers Archives Health Topics Pregnancy Before or between pregnancies Nutrition, weight & fitness Prenatal care Is it safe? Labor & ... Report Cards Careers Archives Pregnancy Before or between pregnancies Nutrition, weight & fitness Prenatal care Is it safe? Labor & ...

  6. Treatments for Preterm Labor

    ... Careers Archives Health Topics Pregnancy Before or between pregnancies Nutrition, weight & fitness Prenatal care Is it safe? Labor & ... Report Cards Careers Archives Pregnancy Before or between pregnancies Nutrition, weight & fitness Prenatal care Is it safe? Labor & ...

  7. Stages of Labor

    ... Careers Archives Health Topics Pregnancy Before or between pregnancies Nutrition, weight & fitness Prenatal care Is it safe? Labor & ... Report Cards Careers Archives Pregnancy Before or between pregnancies Nutrition, weight & fitness Prenatal care Is it safe? Labor & ...

  8. Trade, Labor, Legitimacy

    Guzman, Andrew

    2003-01-01

    The relationship between international trade and labor standards is one of several controversial issues facing the WTO. Proponents of a trade-labor link argue that labor is a human rights issue and that trade sanctions represent a critical tool in the effort to improve international working conditions. Opponents argue that a link between trade and labor would open the door to protectionist measures that would target low wage countries and harm the very workers the policy is intended to help. ...

  9. Emancipating Labor Internationalism

    Waterman, Peter

    2004-01-01

    The secular trinity of c19th socialism was Labor-Internationalism-Emancipation. As early-industrial capitalism developed into a national-industrial-colonial capitalism, the internationalism of labor became literally international, and simultaneously lost its emancipatory aspiration and capacity (or vice versa). The dramatic – and labor-devastating – development of a globalised-networked-informatised capitalism is raising the necessity and possibility of a new kind of labor internationalis...

  10. High quality junctions by interpenetration of vapor liquid solid grown nanostructures for microchip integration

    Jebril, Seid; Kuhlmann, Hanna; Adelung, Rainer [Funktionale Nanomaterialien, CAU Kiel (Germany); Mueller, Sven [Nanowires and Thin Films, II. Physikalisches Institut, Goettingen (Germany); Ronning, Carsten [Institute for Solid State Physics, Universitaet Jena (Germany); Kienle, Lorenz [Synthese und Realstruktur, CAU Kiel (Germany); Duppel, Viola [MPI fuer Festkoerperforschung, Stuttgart (Germany)

    2009-07-01

    The usability of nanostructures in electrical devices like gas sensors depends critically on the ability to form high quality contacts and junctions. For the fabrication of various nanostructures, vapor-liquid-solid (VLS) growth is a wide spread and very efficient technique. However, forming contacts with the VLS grown structures to utilize them in a device is still tedious, because either the substrate has to be epitaxial to the VLS material or a manual alignment is necessary. Here we demonstrate the contact formation by simply using the ability of individual crystals to interpenetrate each other during the straight forward VLS growth. This allows growing VLS structures directly on two neighboring gold circuit paths of a microchip; bridges over predefined gaps will be formed. Moreover, TEM investigations confirm the high quality of the crystalline junctions that allow demonstrations as UV and hydrogen-sensor. The VLS devices are compared with conventional produced.

  11. ARIZONA FARM LABOR REPORT.

    SALTER, RICHARD H.

    THE ORGANIZATION OF THE FARM PLACEMENT PROGRAM IS DESCRIBED. INCLUDED ARE THE ADMINISTRATIVE ORGANIZATIONS, THE LOCAL LEVELS, THE STATE FARM LABOR ADVISORY COMMITTEE, AND THE PLANNING AND OPERATING METHODS USED BY FARM PLACEMENT PERSONNEL IN MEETING FARM LABOR NEEDS. MAJOR CROP ACTIVITIES ARE RELATED TO COTTON AND VEGETABLES. THE LABOR FORCE IS…

  12. Labor migration in Asia.

    Martin, P L

    1991-01-01

    "A recent conference sponsored by the United Nations Center for Regional Development (UNCRD) in Nagoya, Japan examined the growing importance of labor migration for four major Asian labor importers (Japan, Hong Kong, Malaysia, and Singapore) and five major labor exporters (Bangladesh, Korea, Pakistan, Philippines, and Thailand).... The conference concluded that international labor migration would increase within Asia because the tight labor markets and rising wages which have stimulated Japanese investment in other Asian nations, for example, have not been sufficient to eliminate migration push and pull forces...." excerpt

  13. Metrication manual

    Harper, A.F.A.; Digby, R.B.; Thong, S.P.; Lacey, F.

    1978-04-01

    In April 1978 a meeting of senior metrication officers convened by the Commonwealth Science Council of the Commonwealth Secretariat, was held in London. The participants were drawn from Australia, Bangladesh, Britain, Canada, Ghana, Guyana, India, Jamaica, Papua New Guinea, Solomon Islands and Trinidad and Tobago. Among other things, the meeting resolved to develop a set of guidelines to assist countries to change to SI and to compile such guidelines in the form of a working manual

  14. La Justicia Laboral

    Montoya Melgar, Alfredo

    2003-07-01

    Full Text Available Iniciada en el último cuarto del siglo XIX nuestra legislación laboral, pronto se plantea la exigencia de que las reglas sustantivas del nuevo Derecho vayan acompañadas de normas jurisdiccionales y procesales específicas, atentas a las exigencias de la justicia laboral. Tras una etapa de justicia social paritaria, obrero-patronal, la jurisdicción laboral pasa a ser desempeñada por jueces profesionales centrándose en la Magistratura de Trabajo y consolidándose el diseño procesal en sucesivas Leyes de Procedimiento Laboral.
    En la actualidad, y aunque la nueva Ley de Enjuiciamiento Civil ha incidido de modo relevante sobre el proceso laboral, es obvia la influencia que el modelo del proceso laboral ha ejercido con carácter previo sobre el nuevo proceso civil.

  15. Labor Laws and Innovation

    Viral V. Acharya; Ramin P. Baghai; Krishnamurthy V. Subramanian

    2013-01-01

    Can stringent labor laws be efficient? Possibly, if they provide firms with a commitment device to not punish short-run failures and thereby incentivize the pursuit of value-maximizing innovative activities. In this paper, we provide empirical evidence that strong labor laws indeed appear to have an ex ante positive incentive effect by encouraging the innovative pursuits of firms and their employees. Using patents and citations as proxies for innovation and a time-varying index of labor laws,...

  16. Dysfunctional Workers, Functional Texts: The Transformation of Work in Institutional Procedure Manuals.

    Sullivan, Francis J.

    1997-01-01

    Examines how conflicts between management and workers over division of labor are enacted in two manuals--the official manual operationalizing Internal Revenue Service (IRS) regulations and a "translation" of the official manual--governing tax examiners' work in an IRS Service Center. Finds that systemic differences between the manuals…

  17. Transit labor relations guide

    2001-09-01

    This report is designed as a guide for those involved in labor relations in the transit industry. It begins with a history of transit labor relations. The economic, political, and legal environment of transit relations is then discussed. A section fo...

  18. Female Labor Supply

    Maassen-van den Brink, te Henriet

    1994-01-01

    To gain insight on factors that impede economic independence of women, this book concentrates on female labor supply in relation to child care, male-female wage differentials, the division of unpaid labor, and marital conflicts between women and men. It may very well be that restrictions on the

  19. Pdap Manual

    Pedersen, Mads Mølgaard; Larsen, Torben J.

    Pdap, Python Data Analysis Program, is a program for post processing, analysis, visualization and presentation of data e.g. simulation results and measurements. It is intended but not limited to the domain of wind turbines. It combines an intuitive graphical user interface with python scripting...... that allows automation and implementation of custom functions. This manual gives a short introduction to the graphical user interface, describes the mathematical background for some of the functions, describes the scripting API and finally a few examples on how automate analysis via scripting is presented....... The newest version, and more documentation and help on how to used, extend and automate Pdap can be found at the webpage www.hawc2.dk...

  20. Update of the Dutch manual for costing studies in health care

    T.A. Kanters (Tim A.); C.A.M. Bouwmans-Frijters (Clazien); N. van der Linden (Naomi); S.S. Tan (Siok Swan); L. van Hakkaart-van Roijen (Leona)

    2017-01-01

    markdownabstract__Objectives__ Dutch health economic guidelines include a costing manual, which describes preferred research methodology for costing studies and reference prices to ensure high quality studies and comparability between study outcomes. This paper describes the most

  1. Analysis of high-quality modes in open chaotic microcavities

    Fang, W.; Yamilov, A.; Cao, H.

    2005-01-01

    We present a numerical study of the high-quality modes in two-dimensional dielectric stadium microcavities. Although the classical ray mechanics is fully chaotic in a stadium billiard, all of the high-quality modes show a 'strong scar' around unstable periodic orbits. When the deformation (ratio of the length of the straight segments over the diameter of the half circles) is small, the high-quality modes correspond to whispering-gallery-type trajectories and their quality factors decrease monotonically with increasing deformation. At large deformation, each high-quality mode is associated with multiple unstable periodic orbits. Its quality factor changes nonmonotonically with the deformation, and there exists an optimal deformation for each mode at which its quality factor reaches a local maximum. This unusual behavior is attributed to the interference of waves propagating along different constituent orbits that could minimize light leakage out of the cavity

  2. Innovative and high quality education through Open Education and OER

    Stracke, Christian M.

    2017-01-01

    Online presentation and webinar by Stracke, C. M. (2017, 18 December) on "Innovative and high quality education through Open Education and OER" for the Belt and Road Open Education Learning Week by the Beijing Normal University, China.

  3. Improving high quality, equitable maternal health services in Malawi ...

    Improving high quality, equitable maternal health services in Malawi (IMCHA) ... In response, the Ministry of Health implemented a Standards-Based Management and Recognition for Reproductive Health initiative to improve ... Total funding.

  4. High Quality Education and Learning for All through Open Education

    Stracke, Christian M.

    2016-01-01

    Keynote at the International Lensky Education Forum 2016, Yakutsk, Republic of Sakha, Russian Federation, by Stracke, C. M. (2016, 16 August): "High Quality Education and Learning for All through Open Education"

  5. Uranium tailings sampling manual

    Feenstra, S.; Reades, D.W.; Cherry, J.A.; Chambers, D.B.; Case, G.G.; Ibbotson, B.G.

    1985-01-01

    The purpose of this manual is to describe the requisite sampling procedures for the application of uniform high-quality standards to detailed geotechnical, hydrogeological, geochemical and air quality measurements at Canadian uranium tailings disposal sites. The selection and implementation of applicable sampling procedures for such measurements at uranium tailings disposal sites are complicated by two primary factors. Firstly, the physical and chemical nature of uranium mine tailings and effluent is considerably different from natural soil materials and natural waters. Consequently, many conventional methods for the collection and analysis of natural soils and waters are not directly applicable to tailings. Secondly, there is a wide range in the physical and chemical nature of uranium tailings. The composition of the ore, the milling process, the nature of tailings depositon, and effluent treatment vary considerably and are highly site-specific. Therefore, the definition and implementation of sampling programs for uranium tailings disposal sites require considerable evaluation, and often innovation, to ensure that appropriate sampling and analysis methods are used which provide the flexibility to take into account site-specific considerations. The following chapters describe the objective and scope of a sampling program, preliminary data collection, and the procedures for sampling of tailings solids, surface water and seepage, tailings pore-water, and wind-blown dust and radon

  6. 78 FR 72714 - Child Labor, Forced Labor, and Forced or Indentured Child Labor in the Production of Goods in...

    2013-12-03

    ... DEPARTMENT OF LABOR Child Labor, Forced Labor, and Forced or Indentured Child Labor in the... Child Labor AGENCY: The Bureau of International Labor Affairs, United States Department of Labor. ACTION..., 2013, regarding child labor and forced labor in foreign countries. Relevant information will be used by...

  7. Caltrans : construction manual

    2009-08-01

    Caltrans intends this manual as a resource for all personnel engaged in contract administration. The manual establishes policies and procedures for the construction phase of Caltrans projects. However, this manual is not a contract document. It impos...

  8. CHILD LABOR IN PALEMBANG

    Indri Ariyanti

    2016-07-01

    Full Text Available This research explains the effects of gender, parents’ education, parent’s income, the number of siblings, childbirth order, the presence of parents and patriarchal kinship system on the probability of child labor in Palembang. This study, especially, investigates the probability of children age 7-15 years old to be a worker. It is found that factors that significantly affect child labor are gender, the number of siblings, childbirth order, the presence of parents and patriarchal system. However, parents’ education and income are found to be insignificant in affecting the probability of child labor in Palembang.

  9. Relationship Banking in Labor Bank

    三村, 聡

    2012-01-01

    As Labor bank is seemed as business partner of labor union, it contributes each community activities. For example, Labor bank helps retired employee, laborer and inhabitants. In addition, after the amendment of Money Lending Business Act of 2010, labor bank became clearly community based bank by consulting for heavily-indebted people and their education. This paper analyzes the new role of labor bank such as community contribution and enhancing financing service by collecting of the opinion o...

  10. Labor Agreement Information System (LAIRS)

    Office of Personnel Management — The Labor Agreement Information Retrieval System (LAIRS) is a database containing historical information on labor-management relations in the Federal Government. It...

  11. Child Labor: Global Offensive.

    Sutcliffe, Peter; And Others

    1993-01-01

    Includes "An Evil Unbearable to the Human Heart" (Sutcliffe); "Fighting Indifference and Inaction" (Fromont); "Concerted International Action for Children"; "New Shelter for Street Kids of Ankara" (Fromont); "IPEC's International Program for Elimination of Child Labor Challenge to Brazilian…

  12. Child labor : a review

    Grootaert, Christiaan; Kanbur, Ravi

    1995-01-01

    On September 30, 1990, the first World Summit for Children promised to reduce child mortality and malnutrition. It set targets to be reached by the year 2000. Although it established no explicit goals on child labor, the targets included basic education for all children and the completion of primary education by at least 80 percent of children. Meeting these goals will reduce child labor, say the authors. The evidence they review shows that education intervention play a key role in reducing c...

  13. [Active management of labor].

    Ruiz Ortiz, E; Villalobos Román, M; Flores Murrieta, G; Sotomayor Alvarado, L

    1991-01-01

    Eighty three primigravidae patients at the end of latency labor, erased cervix, 3 cm dilation, vertex presentation and adequate pelvis, were studied. Two groups were formed: 53 patients in the study group, who received active management of labor, and 30 patients in the control group, treated in the traditional way. In all the patients a graphic recording of labor, was carried out; it included all the events, and as labor advanced, a signoidal curve of cervical dilatation, was registered, as well as the hyperbolic one for presentation descent. The study group received the method in a systematized manner, as follows: 1. Peridular block. 2. Amniotomy. 3. IV oxytocin one hour after amniotomy. 4. FCR monitoring. 5. Detection of dystocia origin. Materno-fetal morbidity was registered in both groups, as well as cesarean section rate, instrumental delivery and its indications, labor duration, and time of stay in labor room. Diminution of above intems and opportune detection of dystocia, were determined. It was concluded that a constructive action plan, starting at hospital admission in most healthy women, allows a normal delivery of brief duration.

  14. [Labor market and health. SESPAS Report 2010].

    García, Ana M

    2010-12-01

    The labor market, where the supply of labor meets demand, determines employment and working conditions, with positive and negative effects on the active population's health and that of their families. Labor markets are also affected by national and international social and economic policies. Unemployment, precarious contracts and new types of employment have been shown to be related to exposure to living and working conditions that cause physical and mental health problems. Some collectives, such as manual, young or immigrant workers, are more vulnerable to labor market fluctuations and more frequently experience adverse employment and working conditions. The current situation in Spain is now highly worrysome. In Spain, in 2009, more than 1.2 million workers lost their jobs. The unemployment rate has doubled in 5 years, from 9% in 2005 to 18% in 2009. Temporary contracts account for 24% of all job contracts. Economic and employment policies are urgently needed to reverse this situation, which unquestionably has a negative effect on people's health and wellbeing. Copyright © 2010 SESPAS. Published by Elsevier Espana. All rights reserved.

  15. A protocol for generating a high-quality genome-scale metabolic reconstruction.

    Thiele, Ines; Palsson, Bernhard Ø

    2010-01-01

    Network reconstructions are a common denominator in systems biology. Bottom-up metabolic network reconstructions have been developed over the last 10 years. These reconstructions represent structured knowledge bases that abstract pertinent information on the biochemical transformations taking place within specific target organisms. The conversion of a reconstruction into a mathematical format facilitates a myriad of computational biological studies, including evaluation of network content, hypothesis testing and generation, analysis of phenotypic characteristics and metabolic engineering. To date, genome-scale metabolic reconstructions for more than 30 organisms have been published and this number is expected to increase rapidly. However, these reconstructions differ in quality and coverage that may minimize their predictive potential and use as knowledge bases. Here we present a comprehensive protocol describing each step necessary to build a high-quality genome-scale metabolic reconstruction, as well as the common trials and tribulations. Therefore, this protocol provides a helpful manual for all stages of the reconstruction process.

  16. Labor progress indices and dynamics of the individual uterine contraction during the active stage of labor.

    Ophir, Ella; Bornstein, Jacob; Odeh, Marwan; Kaminsky, Svetlana; Shnaider, Oleg; Megel, Yuri; Barnea, Ofer

    2014-03-01

    To obtain and study new data on the dynamics of the labor process and to develop a contraction-based index of labor progress. This study was carried out at the Delivery Room, Department of Obstetrics and Gynecology, Western Galilee Hospital, Nahariya, Israel, using a new device (Birth Track). We continuously monitored cervical dilatation (CD) and head descent (HD) in 30 nulliparaous women during active labor with (augmented group) and without (study group) oxytocin augmentation. This led to the development and validation of progress indices based on features extracted from continuous monitoring. There were no significant differences between the average of each parameter in the study and augmented groups, except for HD velocity. Average HD velocity was faster in the study group. Linear regression analyses demonstrated that head station (HS) amplitude and Toco amplitude were the best parameters for predicting HD velocity in both groups. In the study group, average HD velocity was also significantly related to Toco rate and contraction efficiency. In the augmented group, only a weak correlation with Toco rate was seen, and no correlation with contraction efficiency. With the assistance of the Birth Track device, we can obtain continuous data on the labor process and indices to estimate the labor progress process without the use of vaginal (manual) examination. © 2013 The Authors. Journal of Obstetrics and Gynaecology Research © 2013 Japan Society of Obstetrics and Gynecology.

  17. Concrete Waste Recycling Process for High Quality Aggregate

    Ishikura, Takeshi; Fujii, Shin-ichi

    2008-01-01

    Large amount of concrete waste generates during nuclear power plant (NPP) dismantling. Non-contaminated concrete waste is assumed to be disposed in a landfill site, but that will not be the solution especially in the future, because of decreasing tendency of the site availability and natural resources. Concerning concrete recycling, demand for roadbeds and backfill tends to be less than the amount of dismantled concrete generated in a single rural site, and conventional recycled aggregate is limited of its use to non-structural concrete, because of its inferior quality to ordinary natural aggregate. Therefore, it is vital to develop high quality recycled aggregate for general uses of dismantled concrete. If recycled aggregate is available for high structural concrete, the dismantling concrete is recyclable as aggregate for industry including nuclear field. Authors developed techniques on high quality aggregate reclamation for large amount of concrete generated during NPP decommissioning. Concrete of NPP buildings has good features for recycling aggregate; large quantity of high quality aggregate from same origin, record keeping of the aggregate origin, and little impurities in dismantled concrete such as wood and plastics. The target of recycled aggregate in this development is to meet the quality criteria for NPP concrete as prescribed in JASS 5N 'Specification for Nuclear Power Facility Reinforced Concrete' and JASS 5 'Specification for Reinforced Concrete Work'. The target of recycled aggregate concrete is to be comparable performance with ordinary aggregate concrete. The high quality recycled aggregate production techniques are assumed to apply for recycling for large amount of non-contaminated concrete. These techniques can also be applied for slightly contaminated concrete dismantled from radiological control area (RCA), together with free release survey. In conclusion: a technology on dismantled concrete recycling for high quality aggregate was developed

  18. TODAY THE GLOBAL LABOR MARKET

    D. G. Shchipanova

    2013-01-01

    Full Text Available The international movement of labor, including temporary impacts on the socio-economic development of the donor and recipient countries the labor force. In this regard, it is relevant and legitimate problems of the evolution of the global labor market, the need to examine the issues of labor mobility, the problems of international labor migration and its impact on the national markets of skilled labor in the context of globalization. Distribution and use of human resources becomes cross-border nature, and so an international study of the labor market.

  19. Learning Disabilities and Achieving High-Quality Education Standards

    Gartland, Debi; Strosnider, Roberta

    2017-01-01

    This is an official document of the National Joint Committee on Learning Disabilities (NJCLD), of which Council for Learning Disabilities is a long-standing, active member. With this position paper, NJCLD advocates for the implementation of high-quality education standards (HQES) for students with learning disabilities (LD) and outlines the…

  20. extraction of high quality dna from polysaccharides-secreting ...

    cistvr

    A DNA extraction method using CTAB was used for the isolation of genomic DNA from ten. Xanthomonas campestris pathovars, ten isolates of Xanthomonas albilineans and one isolate of. Pseudomonas rubrisubalbicans. High quality DNA was obtained that was ideal for molecular analy- ses. Extracellular polysaccharides ...

  1. Negative Binomial charts for monitoring high-quality processes

    Albers, Willem/Wim

    Good control charts for high quality processes are often based on the number of successes between failures. Geometric charts are simplest in this respect, but slow in recognizing moderately increased failure rates p. Improvement can be achieved by waiting until r > 1 failures have occurred, i.e. by

  2. Adoption and impact of high quality bambara flour (HQBF ...

    Adoption and impact of high quality bambara flour (HQBF) technology in the ... consumer acceptability/quality of products, credit, availability of raw materials, and ... as a result of 12.5 per cent increase in demand for bambara-based products.

  3. Synthesis and spectroscopic study of high quality alloy Cdx S ...

    Wintec

    In the present study, we report the synthesis of high quality CdxZn1–xS nanocrystals alloy at. 150°C with .... (XRD) using a Siemens model D 500, powder X-ray ... decays were analysed using IBH DAS6 software. 3. ... This alloying process is.

  4. Labor Market Progeria.

    Rodeheaver, Dean

    1990-01-01

    Social ambivalence toward women's roles, sexuality, appearance, and aging combine with social standards of attractiveness to create both age and sex discrimination in the workplace. The life expectancy of presentability is shorter among women than men, thus creating an accelerated aging process termed labor market progeria. (SK)

  5. The comparison of automated urine analyzers with manual microscopic examination for urinalysis automated urine analyzers and manual urinalysis

    ?nce, Fatma Demet; Ellida?, Hamit Ya?ar; Koseo?lu, Mehmet; ?im?ek, Ne?e; Yal??n, H?lya; Zengin, Mustafa Osman

    2016-01-01

    Objectives: Urinalysis is one of the most commonly performed tests in the clinical laboratory. However, manual microscopic sediment examination is labor-intensive, time-consuming, and lacks standardization in high-volume laboratories. In this study, the concordance of analyses between manual microscopic examination and two different automatic urine sediment analyzers has been evaluated. Design and methods: 209 urine samples were analyzed by the Iris iQ200 ELITE (Ä°ris Diagnostics, USA), Dirui...

  6. Next Generation High Quality Videoconferencing Service for the LHC

    CERN. Geneva

    2012-01-01

    In recent times, we have witnessed an explosion of video initiatives in the industry worldwide. Several advancements in video technology are currently improving the way we interact and collaborate. These advancements are forcing tendencies and overall experiences: any device in any network can be used to collaborate, in most cases with an overall high quality. To cope with this technology progresses, CERN IT Department has taken the leading role to establish strategies and directions to improve the user experience in remote dispersed meetings and remote collaboration at large in the worldwide LHC communities. Due to the high rate of dispersion in the LHC user communities, these are critically dependent of videoconferencing technology, with a need of robustness and high quality for the best possible user experience. We will present an analysis of the factors that influenced the technical and strategic choices to improve the reliability, efficiency and overall quality of the LHC remote sessions. In particular, ...

  7. Wellbeing Understanding in High Quality Healthcare Informatics and Telepractice.

    Fiorini, Rodolfo A; De Giacomo, Piero; L'Abate, Luciano

    2016-01-01

    The proper use of healthcare informatics technology and multidimensional conceptual clarity are fundamental to create and boost outstanding clinical and telepractice results. Avoiding even terminology ambiguities is mandatory for high quality of care service. For instance, well-being or wellbeing is a different way to write the same concept only, or there is a good deal of ambiguity around the meanings of these terms the way they are written. In personal health, healthcare and healthcare informatics, this kind of ambiguity and lack of conceptual clarity has been called out repeatedly over the past 50 years. It is time to get the right, terse scenario. We present a brief review to develop and achieve ultimate wellbeing understanding for practical high quality healthcare informatics and telepractice application. This article presents an innovative point of view on deeper wellbeing understanding towards its increased clinical effective application.

  8. Methods and systems for fabricating high quality superconducting tapes

    Majkic, Goran; Selvamanickam, Venkat

    2018-02-13

    An MOCVD system fabricates high quality superconductor tapes with variable thicknesses. The MOCVD system can include a gas flow chamber between two parallel channels in a housing. A substrate tape is heated and then passed through the MOCVD housing such that the gas flow is perpendicular to the tape's surface. Precursors are injected into the gas flow for deposition on the substrate tape. In this way, superconductor tapes can be fabricated with variable thicknesses, uniform precursor deposition, and high critical current densities.

  9. Process to Continuously Melt, Refine and Cast High Quality Steel

    None

    2005-09-01

    The purpose of this project is to conduct research and development targeted at designing a revolutionary steelmaking process. This process will deliver high quality steel from scrap to the casting mold in one continuous process and will be safer, more productive, and less capital intensive to build and operate than conventional steelmaking. The new process will produce higher quality steel faster than traditional batch processes while consuming less energy and other resources.

  10. High-quality uniform dry transfer of graphene to polymers.

    Lock, Evgeniya H; Baraket, Mira; Laskoski, Matthew; Mulvaney, Shawn P; Lee, Woo K; Sheehan, Paul E; Hines, Daniel R; Robinson, Jeremy T; Tosado, Jacob; Fuhrer, Michael S; Hernández, Sandra C; Walton, Scott G

    2012-01-11

    In this paper we demonstrate high-quality, uniform dry transfer of graphene grown by chemical vapor deposition on copper foil to polystyrene. The dry transfer exploits an azide linker molecule to establish a covalent bond to graphene and to generate greater graphene-polymer adhesion compared to that of the graphene-metal foil. Thus, this transfer approach provides a novel alternative route for graphene transfer, which allows for the metal foils to be reused. © 2011 American Chemical Society

  11. Parturients' need of continuous labor support in labor wards

    Administrator

    Continuous labor support is practiced in different parts of the world. In Ethiopia ... Objective: The purpose of the study was to assess the attitude of women in response to labor support based at institutional ... The reasons given for wanting companion were emotional ..... mothers play vital role in labor and delivery while men.

  12. Child labor, agricultural shocks and labor sharing in rural Ethiopia

    Z.Y. Debebe (Zelalem)

    2010-01-01

    textabstractThe author studies the effect of an agricultural shock and a labor sharing arrangement (informal social network) on child labor. Albeit bad parental preference to child labor (as the strand of literature claims), poor households face compelling situations to send their child to work.

  13. High quality digital holographic reconstruction on analog film

    Nelsen, B.; Hartmann, P.

    2017-05-01

    High quality real-time digital holographic reconstruction, i.e. at 30 Hz frame rates, has been at the forefront of research and has been hailed as the holy grail of display systems. While these efforts have produced a fascinating array of computer algorithms and technology, many applications of reconstructing high quality digital holograms do not require such high frame rates. In fact, applications such as 3D holographic lithography even require a stationary mask. Typical devices used for digital hologram reconstruction are based on spatial-light-modulator technology and this technology is great for reconstructing arbitrary holograms on the fly; however, it lacks the high spatial resolution achievable by its analog counterpart, holographic film. Analog holographic film is therefore the method of choice for reconstructing highquality static holograms. The challenge lies in taking a static, high-quality digitally calculated hologram and effectively writing it to holographic film. We have developed a theoretical system based on a tunable phase plate, an intensity adjustable high-coherence laser and a slip-stick based piezo rotation stage to effectively produce a digitally calculated hologram on analog film. The configuration reproduces the individual components, both the amplitude and phase, of the hologram in the Fourier domain. These Fourier components are then individually written on the holographic film after interfering with a reference beam. The system is analogous to writing angularly multiplexed plane waves with individual component phase control.

  14. Long quantum channels for high-quality entanglement transfer

    Banchi, L; Apollaro, T J G; Cuccoli, A; Verrucchi, P; Vaia, R

    2011-01-01

    High-quality quantum-state and entanglement transfer can be achieved in an unmodulated spin bus operating in the ballistic regime, which occurs when the endpoint qubits A and B are nonperturbatively coupled to the chain by a suitable exchange interaction j 0 . Indeed, the transition amplitude characterizing the transfer quality exhibits a maximum for a finite optimal value j opt 0 (N), where N is the channel length. We show that j opt 0 (N) scales as N -1/6 for large N and that it ensures a high-quality entanglement transfer even in the limit of arbitrarily long channels, almost independently of the channel initialization. For instance, for any chain length the average quantum-state transmission fidelity exceeds 90% and decreases very little in a broad neighbourhood of j opt 0 (N). We emphasize that, taking the reverse point of view, should j 0 be experimentally constrained, high-quality transfer can still be obtained by adjusting the channel length to its optimal value. (paper)

  15. High-quality cardiopulmonary resuscitation: current and future directions.

    Abella, Benjamin S

    2016-06-01

    Cardiopulmonary resuscitation (CPR) represents the cornerstone of cardiac arrest resuscitation care. Prompt delivery of high-quality CPR can dramatically improve survival outcomes; however, the definitions of optimal CPR have evolved over several decades. The present review will discuss the metrics of CPR delivery, and the evidence supporting the importance of CPR quality to improve clinical outcomes. The introduction of new technologies to quantify metrics of CPR delivery has yielded important insights into CPR quality. Investigations using CPR recording devices have allowed the assessment of specific CPR performance parameters and their relative importance regarding return of spontaneous circulation and survival to hospital discharge. Additional work has suggested new opportunities to measure physiologic markers during CPR and potentially tailor CPR delivery to patient requirements. Through recent laboratory and clinical investigations, a more evidence-based definition of high-quality CPR continues to emerge. Exciting opportunities now exist to study quantitative metrics of CPR and potentially guide resuscitation care in a goal-directed fashion. Concepts of high-quality CPR have also informed new approaches to training and quality improvement efforts for cardiac arrest care.

  16. Integration study of high quality teaching resources in universities

    Honglu Liu

    2012-12-01

    Full Text Available Purpose: The development level and quality of education depend on the merits and efficiency in the use of teaching resources, especially in the case of obvious contradiction between the demand and supply of teaching resources. So to integrate teaching resources, improve the efficiency in the use of high quality teaching resources, and take the road of content development to enhance the competitiveness of education has become very important and urgent.Design/methodology/approach: On the basis of analysis on the teaching resources of universities and the problems they faced, this paper introduced the basic concepts of cloud storage, and built the integration architecture of high quality teaching resources in universities based on the cloud storage.Findings and Originality/value: The HDFS-based cloud storage proposed in this paper is a dynamically adjustable and Internet-based storage solution, and the users can access storage targets using the network through a common and easy-to-use protocol and application programming interfaces. This new technology is useful for end users benefits. With the continuous development and improvement of cloud storage, it will necessarily result in more and more applications in the institutions of higher learning and education network.Originality/value: This paper introduced the cloud storage into the integration of high quality teaching resources in universities first and as a new form of service, it can be a good solution.

  17. Child Labor in America's History

    Goldstein, Harold

    1976-01-01

    A brief history of child labor and the fight for legislation to control it at both the state and federal level. The current legal status and the continued existence of child labor in modern times are also discussed. (MS)

  18. A Manual of Style.

    Nebraska State Dept. of Education, Lincoln.

    This "Manual of Style" is offered as a guide to assist Nebraska State employees in producing quality written communications and in presenting a consistently professional image of government documents. The manual is not designed to be all-inclusive. Sections of the manual discuss formatting documents, memorandums, letters, mailing…

  19. LABOR DISCRIMINATION IN BULGARIA

    Vyara Slavyanska

    2017-03-01

    Full Text Available Labor discrimination is a phenomenon with very serious social and economic consequences, which has increased actuality and importance in Bulgaria nowadays. Because of the high price of discrimination, building effective anti-discrimination legislation occupies a special place in the policy of the European Union. Despite the European directives, the presence of anti-discrimination legislation and the broadly declared anti-discrimination inclinations in our country, these are absolutely not enough for providing environment of equality, with a climate of respect and tolerance to the differences. It turns out that certain groups are definitely victims of labor discrimination. In this connection the present article consecutively identifies these groups, as well as the reasons for their discrimination, underlining the necessity and benefits of the integration of the different.

  20. Labor construction trends

    McCall, H.W.

    1976-01-01

    The increasing costs and schedule delays being experienced in construction projects have led companies to look for alternatives to their present methods of expansion. One of the facets being evaluated is the construction labor posture. As a result, more companies are employing open shop contractors. Certain benefits can be realized by open shop construction. Productivity, in terms of the time required and overall costs, is definitely improved at no sacrifice in quality. Before an owner decides to build a project open shop, however, he must be fully aware of the pro's and con's of both types of labor posture. He must know to select a capable open shop contractor and he must realize his obligations for a successful open shop program

  1. Division of Labor

    Oke, Muse; Zaher, Manal S.; Hamdan, Samir

    2014-01-01

    The first assignment of DNA polymerases at the eukaryotic replication fork was possible after the in vitro reconstitution of the simian virus 40 (SV40) replication system. In this system, DNA polymerase α (Pol α) provides both leading and lagging strands with RNA-DNA primers that are extended by DNA polymerase δ (Pol δ). Extrapolating the architecture of the replication fork from the SV40 model system to an actual eukaryotic cell has been challenged by the discovery of a third DNA polymerase in Saccharomyces cerevisiae, DNA polymerase ε (Pol ε). A division of labor has been proposed for the eukaryotic replication fork whereby Pol ε replicates the leading strand and Pol δ replicates the lagging strand. However, an alternative model of unequal division of labor in which Pol δ can still participate in leading-strand synthesis is plausible.

  2. Division of Labor

    Oke, Muse

    2014-09-12

    The first assignment of DNA polymerases at the eukaryotic replication fork was possible after the in vitro reconstitution of the simian virus 40 (SV40) replication system. In this system, DNA polymerase α (Pol α) provides both leading and lagging strands with RNA-DNA primers that are extended by DNA polymerase δ (Pol δ). Extrapolating the architecture of the replication fork from the SV40 model system to an actual eukaryotic cell has been challenged by the discovery of a third DNA polymerase in Saccharomyces cerevisiae, DNA polymerase ε (Pol ε). A division of labor has been proposed for the eukaryotic replication fork whereby Pol ε replicates the leading strand and Pol δ replicates the lagging strand. However, an alternative model of unequal division of labor in which Pol δ can still participate in leading-strand synthesis is plausible.

  3. Labor Informality: General Causes

    Gustavo Sandoval Betancour

    2016-04-01

    Full Text Available The article examines the main causes of labor informality in order to verify the validity of classical theories that explain unemployment in market economies and its relationship to informality. Methodologically, the project was based, in the empirical part, on international statistics, comparing the evolution of labor market structure in a combined sample of highly industrialized countries and other less industrialized ones. Empirical evidence supports the conclusion that the classical economic theory of Marxist origin is inefficient to explain the causes of unemployment in contemporary market economies, as well as it fails to satisfactorily explain informality. On the contrary, we conclude that the theory in question is more relevant to explain informality in centrally planned economies where this phenomenon has been present even more significantly than in free market economies.

  4. Youth Labor Migration in Nepal

    Bossavie, Laurent; Denisova, Anastasiya

    2018-01-01

    This descriptive study investigates internal and external labor migration by Nepalese youth. External labor migration is separated into the flow to India, which is unregulated, and the flow to other countries, which typically takes the form of temporary contract migration to countries with bilateral labor agreements with Nepal (referred to in Nepal as foreign employment). The study finds t...

  5. The Northern States Power Company welding manual advisor

    Lu, Yi; Wood, R.M.

    1993-01-01

    The Welding Manual Advisor (WMA) is an object oriented expert system designed to assist Northern States Power (NSP) personnel in implementing the company's Welding Manual. The expert system captures the knowledge of welding experts, addresses important issues in welding activities and automates the use of the Welding Manual. It is estimated that use of the WMA will save $81,000 over the next six years at NSP, because of the reduction of labor and errors in the use of the Welding Manual, and facilitation of training of NSP personnel. The important features of the WMA include the accuracy and consistency in determining welding procedure and requirements, update capability, user friendly interface, on-line help function, back-up capability, and well-documented manuals

  6. iPod The Missing Manual

    Biersdorfer, J D

    2011-01-01

    Apple's iPod still has the world hooked on portable music, pictures, videos, movies, and more, but one thing it doesn't have is a manual that helps you can get the most out this amazing device. That's where this book comes in. Get the complete scoop on the latest line of iPods and the latest version of iTunes with the guide that outshines them all-iPod: The Missing Manual. The 10th edition is as useful, satisfying, and reliable as its subject. Teeming with high-quality color graphics, each page helps you accomplish a specific task-everything from managing your media and installing and browsi

  7. Key factors for a high-quality VR experience

    Champel, Mary-Luc; Doré, Renaud; Mollet, Nicolas

    2017-09-01

    For many years, Virtual Reality has been presented as a promising technology that could deliver a truly new experience to users. The media and entertainment industry is now investigating the possibility to offer a video-based VR 360 experience. Nevertheless, there is a substantial risk that VR 360 could have the same fate as 3DTV if it cannot offer more than just being the next fad. The present paper aims at presenting the various quality factors required for a high-quality VR experience. More specifically, this paper will focus on the main three VR quality pillars: visual, audio and immersion.

  8. Anti-Stokes Luminescence in High Quality Quantum Wells

    Vinattieri, A.; Bogani, F.; Miotto, A.; Ceccherini, S.

    1997-11-01

    We present a detailed investigation of the anti-Stokes (AS) luminescence which originates from exciton recombination when below gap excitation is used, in a set of high quality quantum well structures. We observe strong excitonic resonances in the AS signal as measured from photoluminescence and photoluminescence excitation spectra. We demonstrate that neither the electromagnetic coupling between the wells nor the morphological disorder can explain this up-conversion effect. Time-resolved luminescence data after ps excitation and fs correlation spectroscopy results provide clear evidence of the occurrence of a two-step absorption which is assisted by the exciton population resonantly excited by the first photon.

  9. Methods and systems for fabricating high quality superconducting tapes

    Majkic, Goran; Selvamanickam, Venkat

    2018-02-13

    An MOCVD system fabricates high quality superconductor tapes with variable thicknesses. The MOCVD system can include a gas flow chamber between two parallel channels in a housing. A substrate tape is heated and then passed through the MOCVD housing such that the gas flow is perpendicular to the tape's surface. Precursors are injected into the gas flow for deposition on the substrate tape. In this way, superconductor tapes can be fabricated with variable thicknesses, uniform precursor deposition, and high critical current densities.

  10. Electrohysterographic Characterization of Labor Contractions

    Mikkelsen, Eva; Fuglsang-Frederiksen, Anders; Petersen, Olav Bjørn

    2012-01-01

    Background: Better methods are needed for preterm labor diagnostication. We hypothesize 1) that depolarization of the myometrium propagates from fundus to isthmus, 2) that the propagation velocity (PV) is faster in labor than in non-labor, and 3) that PV can be determined by electromyography (EMG......). PV may be the best EMG-predictor of preterm labor. Knowledge on how to determine PV is insufficient though. Objective: To investigate EMG-signals from laboring myometrium and to develop a method for determining PV. Method: We included 10 women in active labor. EMG-signals were obtained via three...... of the vertical electrode order. Conclusion: Depolarization of the laboring myometrium may therefore not occur in the direction from fundus to isthmus. Further investigation is needed for PV determination....

  11. 78 FR 13897 - Bureau of International Labor Affairs; Office of Trade and Labor Affairs; Labor Affairs Council...

    2013-03-01

    ... Public Session Meeting AGENCY: International Labor Affairs Bureau (ILAB), U.S. Department of Labor.... Department of Labor gives notice of the public session of the meeting of the Labor Affairs Council (``Council... DEPARTMENT OF LABOR Office of the Secretary Bureau of International Labor Affairs; Office of Trade...

  12. Incapacidad laboral total

    Orlando Díaz Tabares

    1997-04-01

    Full Text Available Se realizó un estudio longitudinal, descriptivo y retrospectivo con el objetivo de conocer el comportamiento de la incapacidad permanente para el trabajo en el municipio "San Cristóbal" durante el decenio 1982-1991, y se aplicó el método de encuesta por el que se recogieron datos que fueron extraídos del modelo oficial de peritaje médico laboral y de la entrevista con el peritado. Los resultados fueron plasmados en tablas de contingencias donde se relacionan las variables por cada año estudiado, y se aplicó la prueba estadística de chi cuadrado. El número de individuos dictaminados con incapacidad laboral total fue de 693; predominó en reportes el año 1988 con 114 casos y muy discretamente el sexo femenino sobre el masculino, el grupo etáreo de 45 a 54 años con 360 casos y la artrosis como entidad valorada por ortopedia, con análisis estadísticos significativos. No resultó estadísticamente significativo, el predominio de la hipertensión arterial sistémica entre las entidades valoradas por la especialidad de medicina interna como causas de incapacidad laboral. Fue muy significativa la variación del número de dictaminados por la comisión en cada uno de los años estudiados y que el porcentaje de ellos que se encontraban realizando trabajos que demandan esfuerzo físico de moderado a intenso al momento de aplicar la encuesta, ascendió al 64,9.A longitudinal, descriptive and retrospective study was conducted in order to know the behavior of permanent labor disability at the municipality of San Cristóbal during 1982-1991. A survey was done to collect data taken from the official model of medical inspections and from the interview with the disabled worker. The results were shown in contingency tables where the variables are related by every year studied. The chi square statistical test was applied. The number of individuals with labor disability was 693. As for reports, the year 1988 predominated with 114. There was a discreet

  13. Description and search labor for information retrieval

    Warner, Julian

    2007-01-01

    Selection power is taken as the fundamental value for information retrieval systems. Selection power is regarded as produced by selection labor, which itself separates historically into description and search labor. As forms of mental labor, description and search labor participate in the conditions for labor and for mental labor. Concepts and distinctions applicable to physical and mental labor are indicated, introducing the necessity of labor for survival, the idea of technology as a human ...

  14. Inestabilidad laboral y competitividad

    García, Norberto

    2010-01-01

    En las dos últimas décadas pasadas - 1980's y 1990's -, en buena parte de los países de América Latina y el Caribe se introdujeron reformas laborales para flexibilizar el mercado laboral - Argentina, Brasil, Chile, Ecuador, Perú, Colombia, Panamá, entre otros - . En particular, siguiendo la experiencia de España de 1983-97, la mayoría de esas reformas promovieron la introducción de múltiples contratos laborales y redujeron los costos de indemnización por despido. La introducción de los múltip...

  15. Percutaneous vertebroplasty with a high-quality rotational angiographic unit

    Pedicelli, Alessandro [Department of Bioimaging and Radiological Sciences, Catholic University of Sacred Heart, Policl. A.Gemelli, l.go Gemelli 1, 00168 Rome (Italy)], E-mail: apedicelli@rm.unicatt.it; Rollo, Massimo [Department of Bioimaging and Radiological Sciences, Catholic University of Sacred Heart, Policl. A.Gemelli, l.go Gemelli 1, 00168 Rome (Italy)], E-mail: mrollo@rm.unicatt.it; Piano, Mariangela [Department of Bioimaging and Radiological Sciences, Catholic University of Sacred Heart, Policl. A.Gemelli, l.go Gemelli 1, 00168 Rome (Italy)], E-mail: mariangela.piano@gmail.com; Re, Thomas J. [Department of Bioimaging and Radiological Sciences, Catholic University of Sacred Heart, Policl. A.Gemelli, l.go Gemelli 1, 00168 Rome (Italy)], E-mail: tomjre@gmail.com; Cipriani, Maria C. [Department of Gerontology, Catholic University of Sacred Heart, Policl. A.Gemelli, l.go Gemelli 1, 00168 Rome (Italy)], E-mail: alexped@yahoo.com; Colosimo, Cesare [Department of Bioimaging and Radiological Sciences, Catholic University of Sacred Heart, Policl. A.Gemelli, l.go Gemelli 1, 00168 Rome (Italy)], E-mail: colosimo@rm.unicatt.it; Bonomo, Lorenzo [Department of Bioimaging and Radiological Sciences, Catholic University of Sacred Heart, Policl. A.Gemelli, l.go Gemelli 1, 00168 Rome (Italy)], E-mail: lbonomo@rm.unicatt.it

    2009-02-15

    We evaluated the reliability of a rotational angiographic unit (RA) with flat-panel detector as a single technique to guide percutaneous vertebroplasty (PVP) and for post-procedure assessment by 2D and 3D reformatted images. Fifty-five consecutive patients (104 vertebral bodies) were treated under RA fluoroscopy. Rotational acquisitions with 2D and 3D reconstruction were obtained in all patients for immediate post-procedure assessment. In complex cases, this technique was also used to evaluate the needle position during the procedure. All patients underwent CT scan after the procedure. RA and CT findings were compared. In all cases, a safe trans-pedicular access and an accurate control of the bone-cement injection were successfully performed with high-quality fluoroscopy, even at the thoracic levels and in case of vertebra plana. 2D and 3D rotational reconstructions permitted CT-like images that clearly showed needle position and were similar to CT findings in depicting intrasomatic implant-distribution. RA detected 40 cement leakages compared to 42 demonstrated by CT and showed overall 95% sensitivity and 100% specificity compared to CT for final post-procedure assessment. Our preliminary results suggest that high-quality RA is reliable and safe as a single technique for PVP guidance, control and post-procedure assessment. It permits fast and cost-effective procedures avoiding multi-modality imaging.

  16. Computer-aided control of high-quality cast iron

    S. Pietrowski

    2008-04-01

    Full Text Available The study discusses the possibility of control of the high-quality grey cast iron and ductile iron using the author’s genuine computer programs. The programs have been developed with the help of algorithms based on statistical relationships that are said to exist between the characteristic parameters of DTA curves and properties, like Rp0,2, Rm, A5 and HB. It has been proved that the spheroidisation and inoculation treatment of cast iron changes in an important way the characteristic parameters of DTA curves, thus enabling a control of these operations as regards their correctness and effectiveness, along with the related changes in microstructure and mechanical properties of cast iron. Moreover, some examples of statistical relationships existing between the typical properties of ductile iron and its control process were given for cases of the melts consistent and inconsistent with the adopted technology.A test stand for control of the high-quality cast iron and respective melts has been schematically depicted.

  17. High quality electron beams from a laser wakefield accelerator

    Wiggins, S M; Issac, R C; Welsh, G H; Brunetti, E; Shanks, R P; Anania, M P; Cipiccia, S; Manahan, G G; Aniculaesei, C; Ersfeld, B; Islam, M R; Burgess, R T L; Vieux, G; Jaroszynski, D A [SUPA, Department of Physics, University of Strathclyde, Glasgow (United Kingdom); Gillespie, W A [SUPA, Division of Electronic Engineering and Physics, University of Dundee, Dundee (United Kingdom); MacLeod, A M [School of Computing and Creative Technologies, University of Abertay Dundee, Dundee (United Kingdom); Van der Geer, S B; De Loos, M J, E-mail: m.wiggins@phys.strath.ac.u [Pulsar Physics, Burghstraat 47, 5614 BC Eindhoven (Netherlands)

    2010-12-15

    High quality electron beams have been produced in a laser-plasma accelerator driven by femtosecond laser pulses with a peak power of 26 TW. Electrons are produced with an energy up to 150 MeV from the 2 mm gas jet accelerator and the measured rms relative energy spread is less than 1%. Shot-to-shot stability in the central energy is 3%. Pepper-pot measurements have shown that the normalized transverse emittance is {approx}1{pi} mm mrad while the beam charge is in the range 2-10 pC. The generation of high quality electron beams is understood from simulations accounting for beam loading of the wakefield accelerating structure. Experiments and self-consistent simulations indicate that the beam peak current is several kiloamperes. Efficient transportation of the beam through an undulator is simulated and progress is being made towards the realization of a compact, high peak brilliance free-electron laser operating in the vacuum ultraviolet and soft x-ray wavelength ranges.

  18. Tank waste remediation system process engineering instruction manual

    ADAMS, M.R.

    1998-01-01

    The purpose of the Tank Waste Remediation System (TWRS) Process Engineering Instruction Manual is to provide guidance and direction to TWRS Process Engineering staff regarding conduct of business. The objective is to establish a disciplined and consistent approach to business such that the work processes within TWRS Process Engineering are safe, high quality, disciplined, efficient, and consistent with Lockheed Martin Hanford Corporation Policies and Procedures. The sections within this manual are of two types: for compliance and for guidance. For compliance sections are intended to be followed per-the-letter until such time as they are formally changed per Section 2.0 of this manual. For guidance sections are intended to be used by the staff for guidance in the conduct of work where technical judgment and discernment are required. The guidance sections shall also be changed per Section 2.0 of this manual. The required header for each manual section is illustrated in Section 2.0, Manual Change Control procedure. It is intended that this manual be used as a training and indoctrination resource for employees of the TWRS Process Engineering organization. The manual shall be required reading for all TWRS Process Engineering staff, matrixed, and subcontracted employees

  19. 29 CFR 401.9 - Labor organization.

    2010-07-01

    ... 29 Labor 2 2010-07-01 2010-07-01 false Labor organization. 401.9 Section 401.9 Labor Regulations... MEANING OF TERMS USED IN THIS SUBCHAPTER § 401.9 Labor organization. Labor organization means a labor organization engaged in an industry affecting commerce and includes any organization of any kind, any agency...

  20. CSTEM User Manual

    Hartle, M.; McKnight, R. L.

    2000-01-01

    This manual is a combination of a user manual, theory manual, and programmer manual. The reader is assumed to have some previous exposure to the finite element method. This manual is written with the idea that the CSTEM (Coupled Structural Thermal Electromagnetic-Computer Code) user needs to have a basic understanding of what the code is actually doing in order to properly use the code. For that reason, the underlying theory and methods used in the code are described to a basic level of detail. The manual gives an overview of the CSTEM code: how the code came into existence, a basic description of what the code does, and the order in which it happens (a flowchart). Appendices provide a listing and very brief description of every file used by the CSTEM code, including the type of file it is, what routine regularly accesses the file, and what routine opens the file, as well as special features included in CSTEM.

  1. Negotiation within labor relations

    Iulia BĂDOI

    2014-06-01

    Full Text Available Negotiation is the process we use in order to obtain things that we want and are controlled by others. Any desire we intend to fulfill, any need that we are obliged to meet is a potential bargaining situations. Between groups and individuals, negotiation occurs naturally, as some have one thing that the other wants and is willing to bargain to get it. More or less we are all involved in negotiations: closing a contract, buying a thing, obtaining sponsorships, collective decision making, conflict resolution, agreement on work plans. Within the field of labor relations, negotiation can occur on the occasion of closing / amending employment contracts or in order to regulate employment or work relations. Moreover, used properly, the negotiation can be an effective tool for solving labor disputes, with benefits for both involved parties. This paper aims to present negotiating principles and steps to follow in planning and preparing negotiations and the negotiating techniques that can lead to a successful negotiation based on a well-developed plan.

  2. Radiological Control Manual

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  3. EMSL Operations Manual

    Foster, Nancy S.

    2009-06-18

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  4. EMSL Operations Manual

    Foster, Nancy S.

    2009-03-25

    This manual is a general resource tool to assist EMSL users and Laboratory staff within EMSL locate official policy, practice and subject matter experts. It is not intended to replace or amend any formal Battelle policy or practice. Users of this manual should rely only on Battelle’s Standard Based Management System (SBMS) for official policy. No contractual commitment or right of any kind is created by this manual. Battelle management reserves the right to alter, change, or delete any information contained within this manual without prior notice.

  5. Radiological Control Manual

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records

  6. HASL procedures manual

    Harley, J.H.

    1977-08-01

    Additions and corrections to the following sections of the HASL Procedures Manual are provided: General, Sampling, Field Measurements; General Analytical Chemistry, Chemical Procedures, Data Section, and Specifications

  7. PCs The Missing Manual

    Karp, David

    2005-01-01

    Your vacuum comes with one. Even your blender comes with one. But your PC--something that costs a whole lot more and is likely to be used daily and for tasks of far greater importance and complexity--doesn't come with a printed manual. Thankfully, that's not a problem any longer: PCs: The Missing Manual explains everything you need to know about PCs, both inside and out, and how to keep them running smoothly and working the way you want them to work. A complete PC manual for both beginners and power users, PCs: The Missing Manual has something for everyone. PC novices will appreciate the una

  8. Does labor market history matter?

    Lesner, Rune Vammen

    2014-01-01

    This paper finds that labor market history plays an important role in the Danish labor market both by directly affecting the transitions between labor market states and indirectly through the wage. When comparing the relative importance of different types of state dependence, it is found that occ......This paper finds that labor market history plays an important role in the Danish labor market both by directly affecting the transitions between labor market states and indirectly through the wage. When comparing the relative importance of different types of state dependence, it is found...... that occurrence dependence from non-employment states seems to have the strongest effect on the employment rate, while employment history is the main driver of state dependence in the wage. Predictions based on the estimated model reveal potential negative long-term effects from external employment shocks...

  9. High quality diesel fuels by VO-LSGO hydrotreatment

    Stanica-Ezeanu, Dorin; Juganaru, Traian [Petroleum and Gas Univ. of Ploiesti (Romania)

    2013-06-01

    The aim of the paper is to obtain a high quality Diesel fuel by hydro-deoxigenation of vegetable oils (VO) mixed with a low sulfur gasoil (LSGO). The process is possible by using a bi-functional catalyst Ni-Mo supported by an activated Al{sub 2}O{sub 3} containing 2% Ultrastable Y-zeolite. The experimental conditions were: T =340 - 380 C, Pressure = 50 bar, LHSV = 1,5 h{sup -1}, H{sub 2}/Feed ratio = 15 mole H{sub 2} /mole liquid feed. The liquid product was separated in two fractions: a light distillate (similar to gasoline) and a heavy distillate (boiling point > 200 C) with very good characteristics for Diesel engines. The reaction chemistry is very complex, but the de-oxygenation process is decisive for the chemical structure of hydrocarbons from final product. Finally, a schema for the reaction mechanism is proposed. (orig.)

  10. Supercapacitors based on high-quality graphene scrolls

    Zeng, Fanyan; Kuang, Yafei; Liu, Gaoqin; Liu, Rui; Huang, Zhongyuan; Fu, Chaopeng; Zhou, Haihui

    2012-06-01

    High-quality graphene scrolls (GSS) with a unique scrolled topography are designed using a microexplosion method. Their capacitance properties are investigated by cyclic voltammetry, galvanostatic charge-discharge and electrical impedance spectroscopy. Compared with the specific capacity of 110 F g-1 for graphene sheets, a remarkable capacity of 162.2 F g-1 is obtained at the current density of 1.0 A g-1 in 6 M KOH aqueous solution owing to the unique scrolled structure of GSS. The capacity value is increased by about 50% only because of the topological change of graphene sheets. Meanwhile, GSS exhibit excellent long-term cycling stability along with 96.8% retained after 1000 cycles at 1.0 A g-1. These encouraging results indicate that GSS based on the topological structure of graphene sheets are a kind of promising material for supercapacitors.

  11. High quality flux control system for electron gun evaporation

    Appelbloom, A.M.; Hadley, P.; van der Marel, D.; Mooij, J.E.

    1991-01-01

    This paper reports on a high quality flux control system for electron gun evaporation developed and tested for the MBE growth of high temperature superconductors. The system can be applied to any electron gun without altering the electron gun itself. Essential elements of the system are a high bandwidth mass spectrometer, control electronics and a high voltage modulator to sweep the electron beam over the melt at high frequencies. the sweep amplitude of the electron beam is used to control the evaporation flux at high frequencies. The feedback loop of the system has a bandwidth of over 100 Hz, which makes it possible to grow superlattices and layered structures in a fast and precisely controlled manner

  12. A roadmap to high quality chemically prepared graphene

    Gengler, Regis Y N; Spyrou, Konstantinos; Rudolf, Petra, E-mail: r.gengler@rug.n, E-mail: p.rudolf@rug.n [Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, 9747AG Groningen (Netherlands)

    2010-09-22

    Graphene was discovered half a decade ago and proved the existence of a two-dimensional system which becomes stable as a result of 3D corrugation. It appeared very quickly that this exceptional material had truly outstanding electronic, mechanical, thermal and optical properties. Consequently a broad range of applications appeared, as the graphene science speedily moved forward. Since then, a lot of effort has been devoted not only to the study of graphene but also to its fabrication. Here we review the chemical approaches to graphene production, their advantages as well as their downsides. Our aim is to draw a roadmap of today's most reliable path to high quality graphene via chemical preparation.

  13. A roadmap to high quality chemically prepared graphene

    Gengler, Regis Y N; Spyrou, Konstantinos; Rudolf, Petra

    2010-01-01

    Graphene was discovered half a decade ago and proved the existence of a two-dimensional system which becomes stable as a result of 3D corrugation. It appeared very quickly that this exceptional material had truly outstanding electronic, mechanical, thermal and optical properties. Consequently a broad range of applications appeared, as the graphene science speedily moved forward. Since then, a lot of effort has been devoted not only to the study of graphene but also to its fabrication. Here we review the chemical approaches to graphene production, their advantages as well as their downsides. Our aim is to draw a roadmap of today's most reliable path to high quality graphene via chemical preparation.

  14. CHOREOGRAPHIC METHODS FOR CREATING NOVEL, HIGH QUALITY DANCE

    David Kirsh

    2016-02-01

    Full Text Available We undertook a detailed ethnographic study of the dance creation process of a noted choreographer and his distinguished troupe. All choreographer dancer interactions were videoed, the choreographer and dancers were interviewed extensively each day, as well as other observations and tests performed. The choreographer used three main methods to produce high quality and novel content: showing, making-on, and tasking. We present, analyze and evaluate these methods, and show how these approaches allow the choreographer to increase the creative output of the dancers and him. His methods, although designed for dance, apply more generally to other creative endeavors, especially where brainstorming is involved, and where the creative process is distributed over many individuals. His approach is also a case study in multi-modal direction, owing to the range of mechanisms he uses to communicate and direct.

  15. Biotransformation of Organic Waste into High Quality Fertilizer

    Bryndum, Sofie

    Agriculture faces several challenges of future provision of nutrients such as limited P reserves and increasing prices of synthetic fertilizers and recycling of nutrients from organic waste can be an important strategy for the long-term sustainability of the agricultural systems. Organically...... and S, is often low; and (3) the unbalanced composition of nutrients rarely matches crop demands. Therefore the objective of this project was to investigate the potential for (1) recycling nutrients from agro-industrial wastes and (2) compost biotransformation into high-quality organic fertilizers...... other uses into fertilizer use would be unlikely. An estimated ~50 % of the total organic waste pool, primarily consisting of animal manure and waste from the processing of sugar cane, coffee, oil palm and oranges, is currently being re-used as “fertilizers”, meaning it is eventually returned...

  16. High-quality Thermodynamic Data on the Stability Changes of Proteins Upon Single-site Mutations

    Pucci, Fabrizio, E-mail: fapucci@ulb.ac.be; Bourgeas, Raphaël, E-mail: rbourgeas@ulb.ac.be; Rooman, Marianne, E-mail: mrooman@ulb.ac.be [Department of BioModeling, BioInformatics and BioProcesses, Université Libre de Bruxelles, CP 165/61, Roosevelt Avenue 50, 1050 Brussels, Belgium and Interuniversity Institute of Bioinformatics in Brussels, CP 263, Triumph Bld, 1050 Brussels (Belgium)

    2016-06-15

    We have set up and manually curated a dataset containing experimental information on the impact of amino acid substitutions in a protein on its thermal stability. It consists of a repository of experimentally measured melting temperatures (T{sub m}) and their changes upon point mutations (ΔT{sub m}) for proteins having a well-resolved x-ray structure. This high-quality dataset is designed for being used for the training or benchmarking of in silico thermal stability prediction methods. It also reports other experimentally measured thermodynamic quantities when available, i.e., the folding enthalpy (ΔH) and heat capacity (ΔC{sub P}) of the wild type proteins and their changes upon mutations (ΔΔH and ΔΔC{sub P}), as well as the change in folding free energy (ΔΔG) at a reference temperature. These data are analyzed in view of improving our insights into the correlation between thermal and thermodynamic stabilities, the asymmetry between the number of stabilizing and destabilizing mutations, and the difference in stabilization potential of thermostable versus mesostable proteins.

  17. Automated Theorem Proving in High-Quality Software Design

    Schumann, Johann; Swanson, Keith (Technical Monitor)

    2001-01-01

    The amount and complexity of software developed during the last few years has increased tremendously. In particular, programs are being used more and more in embedded systems (from car-brakes to plant-control). Many of these applications are safety-relevant, i.e. a malfunction of hardware or software can cause severe damage or loss. Tremendous risks are typically present in the area of aviation, (nuclear) power plants or (chemical) plant control. Here, even small problems can lead to thousands of casualties and huge financial losses. Large financial risks also exist when computer systems are used in the area of telecommunication (telephone, electronic commerce) or space exploration. Computer applications in this area are not only subject to safety considerations, but also security issues are important. All these systems must be designed and developed to guarantee high quality with respect to safety and security. Even in an industrial setting which is (or at least should be) aware of the high requirements in Software Engineering, many incidents occur. For example, the Warshaw Airbus crash, was caused by an incomplete requirements specification. Uncontrolled reuse of an Ariane 4 software module was the reason for the Ariane 5 disaster. Some recent incidents in the telecommunication area, like illegal "cloning" of smart-cards of D2GSM handies, or the extraction of (secret) passwords from German T-online users show that also in this area serious flaws can happen. Due to the inherent complexity of computer systems, most authors claim that only a rigorous application of formal methods in all stages of the software life cycle can ensure high quality of the software and lead to real safe and secure systems. In this paper, we will have a look, in how far automated theorem proving can contribute to a more widespread application of formal methods and their tools, and what automated theorem provers (ATPs) must provide in order to be useful.

  18. Oil Spill Response Manual

    Marieke Zeinstra; Sandra Heins; Wierd Koops

    2014-01-01

    A two year programme has been carried out by the NHL University of Applied Sciences together with private companies in the field of oil and chemical spill response to finalize these manuals on oil and chemical spill response. These manuals give a good overview of all aspects of oil and chemical

  19. Technical Manual. The ACT®

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  20. Eco-Innovation Manual

    O'Hare, Jamie Alexander; McAloone, Tim C.; Pigosso, Daniela Cristina Antelmi

    Aim of this manual is to introduce a methodology for the implementation of eco‐innovation within small and medium sized companies in developing and emerging economies. The intended audience of this manual is organizations that provide professional services to guide and support manufacturing compa...... companies to improve their sustainability performance....

  1. Marketing Research. Instructor's Manual.

    Small Business Administration, Washington, DC.

    Prepared for the Administrative Management Course Program, this instructor's manual was developed to serve small-business management needs. The sections of the manual are as follows: (1) Lesson Plan--an outline of material covered, which may be used as a teaching guide, presented in two columns: the presentation, and a step-by-step indication of…

  2. Indoor Air Quality Manual.

    Baldwin Union Free School District, NY.

    This manual identifies ways to improve a school's indoor air quality (IAQ) and discusses practical actions that can be carried out by school staff in managing air quality. The manual includes discussions of the many sources contributing to school indoor air pollution and the preventive planning for each including renovation and repair work,…

  3. GERTS GQ User's Manual.

    Akiba, Y.; And Others

    This user's manual for the simulation program Graphical Evaluation and Review Technique (GERT) GQ contains sections on nodes, branches, program input description and format, and program output, as well as examples. Also included is a programmer's manual which contains information on scheduling, subroutine descriptions, COMMON Variables, and…

  4. CRISP instrument manual

    Bucknall, D.G.; Langridge, Sean

    1997-05-01

    This document is a user manual for CRISP, one of the two neutron reflectomers at ISIS. CRISP is highly automated allowing precision reproducible measurements. The manual provides detailed instructions for the setting-up and running of the instrument and advice on data analysis. (UK)

  5. LABOR MARKET POLICIES AND EFFECTIVENESS

    DRITAN SHORAJ

    2012-05-01

    Full Text Available In this paper will be examined some important issues of the labor market policies in Albania. As well, the analysis of labor market institutions such as the Social Insurances or the Syndicates on the efficiency of employing active labor forces. Which are the policies on the protection of the labor forces and the criteria of definition of the minimum salary? Furthermore, it continues with the importance of reforms in the labor market policies, to be examined in the labor market aspect as a production factor and as a regulator of the internal market. Fast globalization is causing continuous risk and movement for the active labor forces. The increase and development of technology puts out of the market many employees, decreasing the number of unqualified employees and increases the demand for the qualified ones. Does the globalization really affect the labor market, efficiency and as a consequence increase production, or the latter are benefits only for the developed economic countries? At the same time, we shall examine the movement of the labor forces from one country to another and the fluctuation of the relevant salaries. In general, the analysis of this paper faces two key issues: the first being raised on discussion of the kinds of programs on the active labor forces, such as programs of direct employment or consideration of employment in public sector, and the second regarding the methodology of evaluating these programs. How effective are them on the domestic market? The paper ends with conclusions and recommendations on the efficiency of policies for the labor market forces.

  6. MARS CODE MANUAL VOLUME III - Programmer's Manual

    Chung, Bub Dong; Hwang, Moon Kyu; Jeong, Jae Jun; Kim, Kyung Doo; Bae, Sung Won; Lee, Young Jin; Lee, Won Jae

    2010-02-01

    Korea Advanced Energy Research Institute (KAERI) conceived and started the development of MARS code with the main objective of producing a state-of-the-art realistic thermal hydraulic systems analysis code with multi-dimensional analysis capability. MARS achieves this objective by very tightly integrating the one dimensional RELAP5/MOD3 with the multi-dimensional COBRA-TF codes. The method of integration of the two codes is based on the dynamic link library techniques, and the system pressure equation matrices of both codes are implicitly integrated and solved simultaneously. In addition, the Equation-Of-State (EOS) for the light water was unified by replacing the EOS of COBRA-TF by that of the RELAP5. This programmer's manual provides a complete list of overall information of code structure and input/output function of MARS. In addition, brief descriptions for each subroutine and major variables used in MARS are also included in this report, so that this report would be very useful for the code maintenance. The overall structure of the manual is modeled on the structure of the RELAP5 and as such the layout of the manual is very similar to that of the RELAP. This similitude to RELAP5 input is intentional as this input scheme will allow minimum modification between the inputs of RELAP5 and MARS3.1. MARS3.1 development team would like to express its appreciation to the RELAP5 Development Team and the USNRC for making this manual possible

  7. Egyptian Mythological Manuals

    Jørgensen, Jens Kristoffer Blach

    From the hands of Greek mythographers a great number of myths have survived along with philosophical discussions of their meaning and relevance for the Greeks. It is little known that something similar existed in ancient Egypt where temple libraries and archives held scholarly literature used...... by the native priesthood, much of which has only been published in recent years. As part of this corpus of texts, the ancient Egyptian mythological manuals offer a unique perspective on how the Egyptian priesthood structured and interpreted Egyptian myths. The thesis looks at the different interpretative...... techniques used in the Tebtunis Mythological Manual (Second century CE) and the Mythological Manual of the Delta (Sixth century BCE) and the place of these manuals within the larger corpus of priestly scholarly literature from ancient Egypt. To organize the wealth of local myths the manuals use model...

  8. Fuel Element Technical Manual

    Burley, H.H. [ed.

    1956-08-01

    It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

  9. Manual for the sampling of uranium mine tailings

    Feenstra, S.; Reades, D.W.; Cherry, J.A.; Chambers, D.B.; Case, G.G.; Ibbotson, B.G.

    1983-04-01

    The purpose of this manual is to describe the requisite sampling procedures to provide a basis for the application of uniform high-quality standards to detailed geotechnical, hydrogeological, geochemical and air quality measurements at Canadian uranium tailings disposal sites. The report describes the objective and scope of a sampling program, the preliminary data collection, and the procedures for sampling of tailings solids, surface water and seepage, tailings porewater, and wind-blown dust and radon

  10. Labor Comes into Its Own.

    Wehrle, Edmund F.

    1996-01-01

    Presents a concise and interesting overview of the rise and extension of labor activity during the New Deal. Labor took advantage of Roosevelt's pro-union policies to consolidate their power and forever transform the lives of working men and women. Discusses improvements in working conditions, wages, and benefits. (MJP)

  11. Economic implications of labor induction.

    Garcia-Simon, Raquel; Montañes, Antonio; Clemente, Jesús; Del Pino, María D; Romero, Manuel A; Fabre, Ernesto; Oros, Daniel

    2016-04-01

    To assess health service costs associated with labor induction according to different clinical situations in a tertiary-level hospital. In a prospective study, individual patient cost data were assessed for women admitted for induction of labor at a tertiary hospital in Spain between November 1, 2012, and August 31, 2013. The costs of labor induction were estimated according to maternal and neonatal outcomes, method of delivery, cervical condition at admission, and obstetric indication. Direct costs including professional fees, epidural, maternal stay, consumables, and drugs were calculated. Overall, 412 women were included in the final cost analysis. The mean total cost of labor induction was €3589.87 (95% confidence interval [CI] 3475.13-3704.61). Cesarean delivery after labor induction (€4830.45, 95% CI 4623.13-5037.58) was significantly more expensive than spontaneous delivery (€3037.45, 95% CI 2966.91-3179.99) and instrumental vaginal delivery (€3344.31, 95%CI 3151.69-3536.93). The total cost for patients with a very unfavorable cervix (Bishop score Labor induction for hypertensive disorders of pregnancy was the most expensive obstetric indication for induction of labor (€4347.32, 95% CI 3890.45-4804.18). Following the induction of labor, a number of patient- and treatment-related factors influence costs associated with delivery. Copyright © 2015 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

  12. PSYCHOLOGICAL FACTORS OF LABOR ACTIVITY OF ELDERLY MAN

    Lyusova O.V.

    2016-04-01

    Full Text Available In modern Russian society occurred deformation traditions of respect and maintain the credibility of the elderly, and the socio-economic situation has deteriorated. An important condition to characterize the elderly is related to labor activity. expressed doubts surrounding their professionalism and high-quality and modern education. In society there are negative stereotypes about the elderly: Edil accusations of conservatism, the inability to take risks, tolerance for young. Old age pensioners perceived themselves as age losses, shrinking circle of social contacts, there is social exclusion, significant interpersonal contacts become strained. The psychological diagnosis of labor socialization of older employees 40 people participated. Conducted an empirical study it possible to identify the factors of labor activity in old age: the age and state of health; desire to raise the level of material well-being, the need to work, enthusiasm labor process, achievement motivation, the need for communication with the team; desire for samooaktualizatsii, positive self-esteem, internal locus of control. Working pensioners have high situational anxiety, adequate to the achievement of the objectives, an adequate assessment of its internal and external quality, high life satisfaction, motivation tends to focus on the process and result, reflexivity, subjectivity, have no fear of being rejected, is well adapted to society. Workers older people have average values of introversion, neuroticism, psychoticism.

  13. 76 FR 45397 - Export Inspection and Weighing Waiver for High Quality Specialty Grain Transported in Containers

    2011-07-29

    ...-AB18 Export Inspection and Weighing Waiver for High Quality Specialty Grain Transported in Containers... permanent a waiver due to expire on July 31, 2012, for high quality specialty grain exported in containers... of high quality specialty grain exported in containers are small entities that up until recently...

  14. Automatic ultrasound technique to measure angle of progression during labor.

    Conversano, F; Peccarisi, M; Pisani, P; Di Paola, M; De Marco, T; Franchini, R; Greco, A; D'Ambrogio, G; Casciaro, S

    2017-12-01

    To evaluate the accuracy and reliability of an automatic ultrasound technique for assessment of the angle of progression (AoP) during labor. Thirty-nine pregnant women in the second stage of labor, with fetus in cephalic presentation, underwent conventional labor management with additional translabial sonographic examination. AoP was measured in a total of 95 acquisition sessions, both automatically by an innovative algorithm and manually by an experienced sonographer, who was blinded to the algorithm outcome. The results obtained from the manual measurement were used as the reference against which the performance of the algorithm was assessed. In order to overcome the common difficulties encountered when visualizing by sonography the pubic symphysis, the AoP was measured by considering as the symphysis landmark its centroid rather than its distal point, thereby assuring high measurement reliability and reproducibility, while maintaining objectivity and accuracy in the evaluation of progression of labor. There was a strong and statistically significant correlation between AoP values measured by the algorithm and the reference values (r = 0.99, P < 0.001). The high accuracy provided by the automatic method was also highlighted by the corresponding high values of the coefficient of determination (r 2  = 0.98) and the low residual errors (root mean square error = 2°27' (2.1%)). The global agreement between the two methods, assessed through Bland-Altman analysis, resulted in a negligible mean difference of 1°1' (limits of agreement, 4°29'). The proposed automatic algorithm is a reliable technique for measurement of the AoP. Its (relative) operator-independence has the potential to reduce human errors and speed up ultrasound acquisition time, which should facilitate management of women during labor. Copyright © 2017 ISUOG. Published by John Wiley & Sons Ltd. Copyright © 2017 ISUOG. Published by John Wiley & Sons Ltd.

  15. Bridging the Service Divide: Dual Labor Niches and Embedded Opportunities in Restaurant Work

    Eli R. Wilson

    2018-01-01

    Full Text Available Restaurants and other interactive service workplaces in the United States serve as labor niches for two very different kinds of workers doing different tasks. Immigrant Latinos primarily work “back-of-the-house” jobs doing manual tasks, while class-privileged whites work “front-of-the-house” jobs performing customer-facing tasks. How do these social and structural cleavages between dual labor niches affect the workplace dynamic? Drawing on ethnographic research in upscale Los Angeles restaurants, I describe the closed boundaries between these distinct labor niches and the valuable bridging between them performed by certain workers who are able to ease social tensions and buffer the service labor process. I discuss the implications of these findings for the study of contemporary immigrant labor niches and the nature of the opportunities within them and between them.

  16. [Demography and labor shortage. Future challenges of labor market policy].

    Fuchs, J

    2013-03-01

    For demographic reasons, the German labor force will decrease dramatically and it will be much older on average. However, labor demand, especially for qualified workers, is expected to remain high. This paper focuses on the possibilities of expanding the labor force by increasing the participation rates of women and older persons. Herein, the change in the labor force is decomposed with respect to population and labor participation and, moreover, the effects of higher participation rates are simulated. The decomposition and simulation scenarios are based on data published by the Institute for Employment Research. The analysis clearly reveals that the effect of a considerably higher labor participation of women and older workers will disappear over time when the working-age population shrinks more and more. In addition, individuals who are currently unemployed or out of the labor force are not skilled enough. Since it seems difficult to get more qualified workers in the short and even in the medium term, improving the conditions for women and older people to take up jobs should be tackled soon. This includes investments in education and health care.

  17. High-Quality Seismic Observations of Sonic Booms

    Wurman, Gilead; Haering, Edward A., Jr.; Price, Michael J.

    2011-01-01

    The SonicBREWS project (Sonic Boom Resistant Earthquake Warning Systems) is a collaborative effort between Seismic Warning Systems, Inc. and NASA Dryden Flight Research Center. This project aims to evaluate the effects of sonic booms on Earthquake Warning Systems in order to prevent such systems from experiencing false alarms due to sonic booms. The airspace above the Antelope Valley, California includes the High Altitude Supersonic Corridor and the Black Mountain Supersonic Corridor. These corridors are among the few places in the US where supersonic flight is permitted, and sonic booms are commonplace in the Antelope Valley. One result of this project is a rich dataset of high-quality accelerometer records of sonic booms which can shed light on the interaction between these atmospheric phenomena and the solid earth. Nearly 100 sonic booms were recorded with low-noise triaxial MEMS accelerometers recording 1000 samples per second. The sonic booms had peak overpressures ranging up to approximately 10 psf and were recorded in three flight series in 2010 and 2011. Each boom was recorded with up to four accelerometers in various array configurations up to 100 meter baseline lengths, both in the built environment and the free field. All sonic booms were also recorded by nearby microphones. We present the results of the project in terms of the potential for sonic-boom-induced false alarms in Earthquake Warning Systems, and highlight some of the interesting features of the dataset.

  18. Construction of High-Quality Camel Immune Antibody Libraries.

    Romão, Ema; Poignavent, Vianney; Vincke, Cécile; Ritzenthaler, Christophe; Muyldermans, Serge; Monsion, Baptiste

    2018-01-01

    Single-domain antibodies libraries of heavy-chain only immunoglobulins from camelids or shark are enriched for high-affinity antigen-specific binders by a short in vivo immunization. Thus, potent binders are readily retrieved from relatively small-sized libraries of 10 7 -10 8 individual transformants, mostly after phage display and panning on a purified target. However, the remaining drawback of this strategy arises from the need to generate a dedicated library, for nearly every envisaged target. Therefore, all the procedures that shorten and facilitate the construction of an immune library of best possible quality are definitely a step forward. In this chapter, we provide the protocol to generate a high-quality immune VHH library using the Golden Gate Cloning strategy employing an adapted phage display vector where a lethal ccdB gene has to be substituted by the VHH gene. With this procedure, the construction of the library can be shortened to less than a week starting from bleeding the animal. Our libraries exceed 10 8 individual transformants and close to 100% of the clones harbor a phage display vector having an insert with the length of a VHH gene. These libraries are also more economic to make than previous standard approaches using classical restriction enzymes and ligations. The quality of the Nanobodies that are retrieved from immune libraries obtained by Golden Gate Cloning is identical to those from immune libraries made according to the classical procedure.

  19. High-quality remote interactive imaging in the operating theatre

    Grimstead, Ian J.; Avis, Nick J.; Evans, Peter L.; Bocca, Alan

    2009-02-01

    We present a high-quality display system that enables the remote access within an operating theatre of high-end medical imaging and surgical planning software. Currently, surgeons often use printouts from such software for reference during surgery; our system enables surgeons to access and review patient data in a sterile environment, viewing real-time renderings of MRI & CT data as required. Once calibrated, our system displays shades of grey in Operating Room lighting conditions (removing any gamma correction artefacts). Our system does not require any expensive display hardware, is unobtrusive to the remote workstation and works with any application without requiring additional software licenses. To extend the native 256 levels of grey supported by a standard LCD monitor, we have used the concept of "PseudoGrey" where slightly off-white shades of grey are used to extend the intensity range from 256 to 1,785 shades of grey. Remote access is facilitated by a customized version of UltraVNC, which corrects remote shades of grey for display in the Operating Room. The system is successfully deployed at Morriston Hospital, Swansea, UK, and is in daily use during Maxillofacial surgery. More formal user trials and quantitative assessments are being planned for the future.

  20. Production of high quality water for oil sands application

    Beaudette-Hodsman, C.; Macleod, B. [Pall Corp., Mississauga, ON (Canada); Venkatadri, R. [Pall Corp., East Hills, NY (United States)

    2008-10-15

    This paper described a pressurized microfiltration membrane system installed at an oil sands extraction site in Alberta. The system was designed to complement a reverse osmosis (RO) system installed at the site to produce the high quality feed water required by the system's boilers. Groundwater in the region exhibited moderate total suspended solids and high alkalinity and hardness levels, and the RO system required feed water with a silt density index of 3 or less. The conventional pretreatment system used at the site was slowing down production due to the severe fouling of the RO membranes. The new microfiltration system contained an automated PVDF hollow fiber microfiltration membrane system contained in a trailer. Suspended particles and bacteria were captured within the filter, and permeate was sent to the RO unit. Within 6 hours of being installed, the unit was producing water with SDI values in the range of 1.0 to 2.5. It was concluded that the microfiltration system performed reliably regardless of wide variations in feed water quality and flow rates. 3 refs., 1 tab., 8 figs.

  1. CCD Astrophotography High-Quality Imaging from the Suburbs

    Stuart, Adam

    2006-01-01

    This is a reference book for amateur astronomers who have become interested in CCD imaging. Those glorious astronomical images found in astronomy magazines might seem out of reach to newcomers to CCD imaging, but this is not the case. Great pictures are attainable with modest equipment. Adam Stuart’s many beautiful images, reproduced in this book, attest to the quality of – initially – a beginner’s efforts. Chilled-chip astronomical CCD-cameras and software are also wonderful tools for cutting through seemingly impenetrable light-pollution. CCD Astrophotography from the Suburbs describes one man’s successful approach to the problem of getting high-quality astronomical images under some of the most light-polluted conditions. Here is a complete and thoroughly tested program that will help every CCD-beginner to work towards digital imaging of the highest quality. It is equally useful to astronomers who have perfect observing conditions, as to those who have to observe from light-polluted city skies.

  2. Child labor in Bombay.

    Mehta, M N; Prabhu, S V; Mistry, H N

    1985-01-01

    Of the world's largest child labor force in India, Bombay has over 30,000 working children, most of them migrants. In a prospective study of 73 working children from a part of Dharavi, the biggest slum in Asia, 68% were working as hotel boys; 22% had started working before their 10th birthday, a large number doing so to increase the family income, but earning less than Rs. 100 ($11) per month. Forty percent worked more than 12 hours a day and only 16% continued schooling. Two-thirds depended entirely on their employers for food which was adequate and no child in the study was malnourished. Overall incidence of anemia and vitamin deficiency was 10% each. Only 7% had ailments related to their occupation. Because this was a cross-sectional study no conclusions can be drawn regarding long term and residual effects. Preventing children from working is likely to make worse their own as well as their families' problems unless substitute sources of income or welfare are available. Legal protection and other services near their working places are essential for those who have to work.

  3. Salinas : theory manual.

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2004-08-01

    This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas , we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programer-notes manual, the user's notes and of course the material in the open literature.

  4. Fire Protection Program Manual

    Sharry, J A

    2012-05-18

    This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

  5. LABOR SUBSTITUTABILITY IN LABOR INTENSIVE AGRICULTURE AND TECHNOLOGICAL CHANGE IN THE PRESENCE OF FOREIGN LABOR

    Napasintuwong, Orachos; Emerson, Robert D.

    2004-01-01

    The Morishima elasticity of substitution (MES) is estimated to address factor substitutability in Florida agriculture during 1960-1999. By adopting a profit maximization model of induced innovation theory, the MES's between hired and self-employed labor and the MES's between labor and capital provide implications for future immigration policies.

  6. Manual therapy for plantar heel pain.

    Pollack, Yosefa; Shashua, Anat; Kalichman, Leonid

    2018-03-01

    Manual therapy employed in the treatment of plantar heel pain includes joint or soft tissue mobilizations. Efficacy of these methods is still under debate. To determine whether manual therapy, consisting of deep massage, myofascial release or joint mobilization is effective in treating plantar heel pain. A critical review of all available studies with an emphasis on randomized controlled trials (RCTs) was performed. PubMed, PEDro, and Google Scholar databases were searched for keywords relating to plantar heel pain, joint, and soft tissue mobilizations. There were no search limitations or language restrictions. The reference lists of all retrieved articles were searched. The PEDro score was used to assess the quality of the reviewed papers. A total of six relevant RCTs were found: two examined the effectiveness of joint mobilization on plantar heel pain and four the effectiveness of soft tissue techniques. Five studies showed a positive short-term effect after manual therapy treatment, mostly soft tissue mobilizations, with or without stretching exercises for patients with plantar heel pain, compared to other treatments. One study observed that adding joint mobilization to the treatment of plantar heel pain was not effective. The quality of all studies was moderate to high. According to reviewed moderate and high-quality RCTs, soft tissue mobilization is an effective modality for treating plantar heel pain. Outcomes of joint mobilizations are controversial. Further studies are needed to evaluate the short and long-term effect of different soft tissue mobilization techniques. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. A Select Bibliography of Books on Labor Issues.

    American Federation of Labor and Congress of Industrial Organizations, Washington, DC.

    This annotated bibliography of 90 books on labor issues presents selections in the following areas: labor history, biographies, contemporary issues, labor economics and labor relations, labor law, labor unions, women and work, and reference books. (DB)

  8. HASL procedures manual

    1980-08-01

    Addition and corrections to the following sections of the HASL Procedures Manual are provided: Table of Contents; Bibliography; Fallout Collection Methods; Wet/Dry Fallout Collection; Fluoride in Soil and Sediment; Strontium-90; Natural Series; Alpha Emitters; and Gamma Emitters

  9. SEVERO code - user's manual

    Sacramento, A.M. do.

    1989-01-01

    This user's manual contains all the necessary information concerning the use of SEVERO code. This computer code is related to the statistics of extremes = extreme winds, extreme precipitation and flooding hazard risk analysis. (A.C.A.S.)

  10. The organizational measurement manual

    Wealleans, David

    2001-01-01

    ... Relationship of process to strategic measurements Summary 37 36Contents 19/10/2000 1:23 pm Page vi vi THE ORGANIZATIONAL MEASUREMENT MANUAL 4 PART 2 ESTABLISHING A PROCESS MEASUREMENT PROGRAMME...

  11. Geochemical engineering reference manual

    Owen, L.B.; Michels, D.E.

    1984-01-01

    The following topics are included in this manual: physical and chemical properties of geothermal brine and steam, scale and solids control, processing spent brine for reinjection, control of noncondensable gas emissions, and goethermal mineral recovery. (MHR)

  12. NCDC Archive Documentation Manuals

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Climatic Data Center Tape Deck Documentation library is a collection of over 400 manuals describing NCDC's digital holdings (both historic and current)....

  13. EMAP Users Manual.

    Kotz, Arnold; Redondo, Rory

    Presented is the user's manual for the Educational Manpower Information Sources Project (EMAP), an information file containing approximately 325 document abstracts related to the field of educational planning. (The EMAP file is described in document SP 006 747.) (JB)

  14. FINAS. Example manual. 2

    Iwata, Koji; Tsukimori, Kazuyuki; Ueno, Mutsuo

    2003-12-01

    FINAS is a general purpose structural analysis computer program which was developed by Japan Nuclear Cycle Development Institute for the analysis of static, dynamic and thermal responses of elastic and inelastic structures by the finite element method. This manual contains typical analysis examples that illustrate applications of FINAS to a variety of structural engineering problems. The first part of this manual presents fundamental examples in which numerical solutions by FINAS are compared with some analytical reference solutions, and the second part of this manual presents more complex examples intended for practical application. All the input data images and principal results for each problem are included in this manual for beginners' convenience. All the analyses are performed by using the FINAS Version 13.0. (author)

  15. Convergent Polishing: A Simple, Rapid, Full Aperture Polishing Process of High Quality Optical Flats & Spheres

    Suratwala, Tayyab; Steele, Rusty; Feit, Michael; Dylla-Spears, Rebecca; Desjardin, Richard; Mason, Dan; Wong, Lana; Geraghty, Paul; Miller, Phil; Shen, Nan

    2014-01-01

    Convergent Polishing is a novel polishing system and method for finishing flat and spherical glass optics in which a workpiece, independent of its initial shape (i.e., surface figure), will converge to final surface figure with excellent surface quality under a fixed, unchanging set of polishing parameters in a single polishing iteration. In contrast, conventional full aperture polishing methods require multiple, often long, iterative cycles involving polishing, metrology and process changes to achieve the desired surface figure. The Convergent Polishing process is based on the concept of workpiece-lap height mismatch resulting in pressure differential that decreases with removal and results in the workpiece converging to the shape of the lap. The successful implementation of the Convergent Polishing process is a result of the combination of a number of technologies to remove all sources of non-uniform spatial material removal (except for workpiece-lap mismatch) for surface figure convergence and to reduce the number of rogue particles in the system for low scratch densities and low roughness. The Convergent Polishing process has been demonstrated for the fabrication of both flats and spheres of various shapes, sizes, and aspect ratios on various glass materials. The practical impact is that high quality optical components can be fabricated more rapidly, more repeatedly, with less metrology, and with less labor, resulting in lower unit costs. In this study, the Convergent Polishing protocol is specifically described for fabricating 26.5 cm square fused silica flats from a fine ground surface to a polished ~λ/2 surface figure after polishing 4 hr per surface on a 81 cm diameter polisher. PMID:25489745

  16. High-quality endoscope reprocessing decreases endoscope contamination.

    Decristoforo, P; Kaltseis, J; Fritz, A; Edlinger, M; Posch, W; Wilflingseder, D; Lass-Flörl, C; Orth-Höller, D

    2018-02-24

    Several outbreaks of severe infections due to contamination of gastrointestinal (GI) endoscopes, mainly duodenoscopes, have been described. The rate of microbial endoscope contamination varies dramatically in literature. The aim of this multicentre prospective study was to evaluate the hygiene quality of endoscopes and automated endoscope reprocessors (AERs) in Tyrol/Austria. In 2015 and 2016, a total of 463 GI endoscopes and 105 AERs from 29 endoscopy centres were analysed by a routine (R) and a combined routine and advanced (CRA) sampling procedure and investigated for microbial contamination by culture-based and molecular-based analyses. The contamination rate of GI endoscopes was 1.3%-4.6% according to the national guideline, suggesting that 1.3-4.6 patients out of 100 could have had contacts with hygiene-relevant microorganisms through an endoscopic intervention. Comparison of R and CRA sampling showed 1.8% of R versus 4.6% of CRA failing the acceptance criteria in phase I and 1.3% of R versus 3.0% of CRA samples failing in phase II. The most commonly identified indicator organism was Pseudomonas spp., mainly Pseudomonas oleovorans. None of the tested viruses were detected in 40 samples. While AERs in phase I failed (n = 9, 17.6%) mainly due to technical faults, phase II revealed lapses (n = 6, 11.5%) only on account of microbial contamination of the last rinsing water, mainly with Pseudomonas spp. In the present study the contamination rate of endoscopes was low compared with results from other European countries, possibly due to the high quality of endoscope reprocessing, drying and storage. Copyright © 2018 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

  17. Labor force activity after 60

    Pedersen, Peder J.; Larsen, Mona

    2015-01-01

    of reference. Main emphasis is given to the development in two distint age groups, i.e. people in the first half of the 60s of which many are eligible for early retirement programs and people older than 65 mostly eligible for social security retirement programs. For these two age groups the actual development...... in labor force participation is described based on register data and on labor force surveys along with indicators of cohort relevant changes in education and health. Focus in the paper includes also the gender aspect to accommodate stronger cohort effects for women than for men. The impact on labor force...

  18. Structural Change Out of Agriculture: Labor Push versus Labor Pull

    Francisco Alvarez-Cuadrado; Markus Poschke

    2011-01-01

    The process of economic development is characterized by substantial rural-urban migrations and a decreasing share of agriculture in output and employment. The literature highlights two main engines behind this process of structural change: (i) improvements in agricultural technology combined with the effect of Engel's law of demand push resources out of the agricultural sector (the "labor push" hypothesis), and (ii) improvements in industrial technology attract labor into this sector (the "la...

  19. Peace Corps Aquaculture Training Manual. Training Manual T0057.

    Peace Corps, Washington, DC. Information Collection and Exchange Div.

    This Peace Corps training manual was developed from two existing manuals to provide a comprehensive training program in fish production for Peace Corps volunteers. The manual encompasses the essential elements of the University of Oklahoma program that has been training volunteers in aquaculture for 25 years. The 22 chapters of the manual are…

  20. Child Labor in the Global Economy

    Eric V. Edmonds; Nina Pavcnik

    2005-01-01

    Few issues in developing countries draw as much popular attention as child labor. This paper begins by quantifying the extent and main characteristics of child labor. It then considers the evidence on a range of issues about child labor. Fundamentally, child labor is a symptom of poverty. Low income and poor institutions are driving forces behind the prevalence of child labor worldwide. This study concludes by assessing the policy options to reduce worldwide child labor.

  1. Survey of Labor Economics Textbooks.

    Maxwell, Nan L.

    1985-01-01

    Labor economics textbooks for use with college students were surveyed. Information concerning intended audience, content, and teaching aids is provided for each text. Criteria used in evaluating the texts is provided. (RM)

  2. Smoking, Labor, & Delivery: It's Complicated

    You probably have mixed feelings about going into labor. On one hand, bringing a new life into the world is really exciting. On the other, it can be really scary to have a baby, especially if this is your first child. Unfortunately, it can be even scarier if you smoke. Research shows that smoking during pregnancy can lead to serious complications for you and your baby during labor and delivery.

  3. A Labor Supply Elasticity Accord?

    Lars Ljungqvist; Thomas J. Sargent

    2011-01-01

    A dispute about the size of the aggregate labor supply elasticity has been fortified by a contentious aggregation theory used by real business cycle theorists. The replacement of that aggregation theory with one more congenial to microeconomic observations opens possibilities for an accord about the aggregate labor supply elasticity. The new aggregation theory drops features to which empirical microeconomists objected and replaces them with life-cycle choices. Whether the new aggregation theo...

  4. Labor Supply and Optimization Frictions

    Søgaard, Jakob Egholt

    In this paper I investigate the nature of optimization frictions by studying the labor market of Danish students. This particular labor market is an interesting case study as it features a range of special institutional settings that affect students’ incentive to earn income and comparing outcomes...... theory. More concretely I find the dominate optimization friction to be individuals’ inattention about their earnings during the year, while real adjustment cost and gradual learning appears to be of less importance....

  5. New developments in high quality grey cast irons

    Iulian Riposan

    2014-07-01

    Full Text Available The paper reviews original data obtained by the present authors, revealed in recent separate publications, describing specific procedures for high quality grey irons, and reflecting the forecast needs of the worldwide iron foundry industry. High power, medium frequency coreless induction furnaces are commonly used in electric melting grey iron foundries. This has resulted in low sulphur (1,500 °C, contributing to unfavourable conditions for graphite nucleation. Thin wall castings are increasingly produced by these electric melt shops with a risk of greater eutectic undercooling during solidification. The paper focused on two groups of grey cast irons and their specific problems: carbides and graphite morphology control in lower carbon equivalent high strength irons (CE=3.4%-3.8%, and austenite dendrite promotion in eutectic and slightly hypereutectic irons (CE=4.1%-4.5%, in order to increase their strength characteristics. There are 3 stages and 3 steps involving graphite formation, iron chemistry and iron processing that appear to be important. The concept in the present paper sustains a threestage model for nucleating flake graphite [(Mn,XS type nuclei]. There are three important groups of elements (deoxidizer, Mn/S, and inoculant and three technological stages in electric melting of iron (superheat, pre-conditioning of base iron, final inoculation. Attention is drawn to a control factor (%Mn x (%S ensuring it equals to 0.03 – 0.06, accompanied by 0.005wt.%–0.010wt.% Al and/or Zr content in inoculated irons. It was found that iron powder addition promotes austenite dendrite formation in eutectic and slightly eutectic, acting as reinforcement for the eutectic cells. But, there is an accompanying possible negative influence on the characteristics of the (Mn,XS type graphite nuclei (change the morphology of nuclei from polygonal compact to irregular polygonal, and therefore promote chill tendency in treated irons. A double addition (iron

  6. High quality protein microarray using in situ protein purification

    Fleischmann Robert D

    2009-08-01

    Full Text Available Abstract Background In the postgenomic era, high throughput protein expression and protein microarray technologies have progressed markedly permitting screening of therapeutic reagents and discovery of novel protein functions. Hexa-histidine is one of the most commonly used fusion tags for protein expression due to its small size and convenient purification via immobilized metal ion affinity chromatography (IMAC. This purification process has been adapted to the protein microarray format, but the quality of in situ His-tagged protein purification on slides has not been systematically evaluated. We established methods to determine the level of purification of such proteins on metal chelate-modified slide surfaces. Optimized in situ purification of His-tagged recombinant proteins has the potential to become the new gold standard for cost-effective generation of high-quality and high-density protein microarrays. Results Two slide surfaces were examined, chelated Cu2+ slides suspended on a polyethylene glycol (PEG coating and chelated Ni2+ slides immobilized on a support without PEG coating. Using PEG-coated chelated Cu2+ slides, consistently higher purities of recombinant proteins were measured. An optimized wash buffer (PBST composed of 10 mM phosphate buffer, 2.7 mM KCl, 140 mM NaCl and 0.05% Tween 20, pH 7.4, further improved protein purity levels. Using Escherichia coli cell lysates expressing 90 recombinant Streptococcus pneumoniae proteins, 73 proteins were successfully immobilized, and 66 proteins were in situ purified with greater than 90% purity. We identified several antigens among the in situ-purified proteins via assays with anti-S. pneumoniae rabbit antibodies and a human patient antiserum, as a demonstration project of large scale microarray-based immunoproteomics profiling. The methodology is compatible with higher throughput formats of in vivo protein expression, eliminates the need for resin-based purification and circumvents

  7. High quality mask storage in an advanced Logic-Fab

    Jähnert, Carmen; Fritsche, Silvio

    2012-02-01

    High efficient mask logistics as well as safe and high quality mask storage are essential requirements within an advanced lithography area of a modern logic waferfab. Fast operational availability of the required masks at the exposure tool with excellent mask condition requires a safe mask handling, safeguarding of high mask quality over the whole mask usage time without any quality degradation and an intelligent mask logistics. One big challenge is the prevention of haze on high advanced phase shift masks used in a high volume production line for some thousands of 248nm or 193nm exposures. In 2008 Infineon Dresden qualified a customer specific developed semi-bare mask storage system from DMSDynamic Micro Systems in combination with a high advanced mask handling and an interconnected complex logistic system. This high-capacity mask storage system DMS M1900.22 for more than 3000 masks with fully automated mask and box handling as well as full-blown XCDA purge has been developed and adapted to the Infineon Lithotoollandscape using Nikon and SMIF reticle cases. Advanced features for ESD safety and mask security, mask tracking via RFID and interactions with the exposure tools were developed and implemented. The stocker is remote controlled by the iCADA-RSM system, ordering of the requested mask directly from the affected exposure tool allows fast access. This paper discusses the advantages and challenges for this approach as well as the practical experience gained during the implementation of the new system which improves the fab performance with respect to mask quality, security and throughput. Especially the realization of an extremely low and stable humidity level in addition with a well controlled air flow at each mask surface, preventing masks from haze degradation and particle contamination, turns out to be a notable technical achievement. The longterm stability of haze critical masks has been improved significantly. Relevant environmental parameters like

  8. SHARP User Manual

    Yu, Y. Q. [Argonne National Lab. (ANL), Argonne, IL (United States); Shemon, E. R. [Argonne National Lab. (ANL), Argonne, IL (United States); Thomas, J. W. [Argonne National Lab. (ANL), Argonne, IL (United States); Mahadevan, Vijay S. [Argonne National Lab. (ANL), Argonne, IL (United States); Rahaman, Ronald O. [Argonne National Lab. (ANL), Argonne, IL (United States); Solberg, Jerome [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-31

    SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculation with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.

  9. SHARP User Manual

    Yu, Y. Q.; Shemon, E. R.; Thomas, J. W.; Mahadevan, Vijay S.; Rahaman, Ronald O.; Solberg, Jerome

    2016-01-01

    SHARP is an advanced modeling and simulation toolkit for the analysis of nuclear reactors. It is comprised of several components including physical modeling tools, tools to integrate the physics codes for multi-physics analyses, and a set of tools to couple the codes within the MOAB framework. Physics modules currently include the neutronics code PROTEUS, the thermal-hydraulics code Nek5000, and the structural mechanics code Diablo. This manual focuses on performing multi-physics calculations with the SHARP ToolKit. Manuals for the three individual physics modules are available with the SHARP distribution to help the user to either carry out the primary multi-physics calculation with basic knowledge or perform further advanced development with in-depth knowledge of these codes. This manual provides step-by-step instructions on employing SHARP, including how to download and install the code, how to build the drivers for a test case, how to perform a calculation and how to visualize the results. Since SHARP has some specific library and environment dependencies, it is highly recommended that the user read this manual prior to installing SHARP. Verification tests cases are included to check proper installation of each module. It is suggested that the new user should first follow the step-by-step instructions provided for a test problem in this manual to understand the basic procedure of using SHARP before using SHARP for his/her own analysis. Both reference output and scripts are provided along with the test cases in order to verify correct installation and execution of the SHARP package. At the end of this manual, detailed instructions are provided on how to create a new test case so that user can perform novel multi-physics calculations with SHARP. Frequently asked questions are listed at the end of this manual to help the user to troubleshoot issues.

  10. 77 FR 9267 - Child Labor, Forced Labor, and Forced or Indentured Child Labor in the Production of Goods in...

    2012-02-16

    ...), established a new eligibility criterion for receipt of trade benefits under the Generalized System of... Child Labor AGENCY: The Bureau of International Labor Affairs, United States Department of Labor. ACTION... information and/or comment on reports issued by the Bureau of International Labor Affairs (ILAB) October 3...

  11. 76 FR 22921 - Child Labor, Forced Labor, and Forced or Indentured Child Labor in the Production of Goods in...

    2011-04-25

    ... trade benefits under the Generalized System of Preferences (GSP), Caribbean Basin Trade and Partnership... Child Labor AGENCY: The Bureau of International Labor Affairs, United States Department of Labor. ACTION... information and/or comment on reports issued by the Bureau of International Labor Affairs (ILAB) on December...

  12. Why Should We Care about Child Labor? The Education, Labor Market, and Health Consequences of Child Labor

    Beegle, Kathleen; Dehejia, Rajeev; Gatti, Roberta

    2009-01-01

    Despite the extensive literature on the determinants of child labor, the evidence on the consequences of child labor on outcomes such as education, labor, and health is limited. We evaluate the causal effect of child labor participation among children in school on these outcomes using panel data from Vietnam and an instrumental variables strategy.…

  13. Update of the Dutch manual for costing studies in health care

    T.A. Kanters (Tim A.); C.A.M. Bouwmans-Frijters (Clazien); N. van der Linden (Naomi); S.S. Tan (Siok Swan); L. van Hakkaart-van Roijen (Leona)

    2017-01-01

    textabstractObjectives: Dutch health economic guidelines include a costing manual, which describes preferred research methodology for costing studies and reference prices to ensure high quality studies and comparability between study outcomes. This paper describes the most important revisions of the

  14. Manufacturing High-Quality Carbon Nanotubes at Lower Cost

    Benavides, Jeanette M.; Lidecker, Henning

    2004-01-01

    A modified electric-arc welding process has been developed for manufacturing high-quality batches of carbon nanotubes at relatively low cost. Unlike in some other processes for making carbon nanotubes, metal catalysts are not used and, consequently, it is not necessary to perform extensive cleaning and purification. Also, unlike some other processes, this process is carried out at atmospheric pressure under a hood instead of in a closed, pressurized chamber; as a result, the present process can be implemented more easily. Although the present welding-based process includes an electric arc, it differs from a prior electric-arc nanotube-production process. The welding equipment used in this process includes an AC/DC welding power source with an integral helium-gas delivery system and circulating water for cooling an assembly that holds one of the welding electrodes (in this case, the anode). The cathode is a hollow carbon (optionally, graphite) rod having an outside diameter of 2 in. (approximately equal to 5.1 cm) and an inside diameter of 5/8 in. (approximately equal to 1.6 cm). The cathode is partly immersed in a water bath, such that it protrudes about 2 in. (about 5.1 cm) above the surface of the water. The bottom end of the cathode is held underwater by a clamp, to which is connected the grounding cable of the welding power source. The anode is a carbon rod 1/8 in. (approximately equal to 0.3 cm) in diameter. The assembly that holds the anode includes a thumbknob- driven mechanism for controlling the height of the anode. A small hood is placed over the anode to direct a flow of helium downward from the anode to the cathode during the welding process. A bell-shaped exhaust hood collects the helium and other gases from the process. During the process, as the anode is consumed, the height of the anode is adjusted to maintain an anode-to-cathode gap of 1 mm. The arc-welding process is continued until the upper end of the anode has been lowered to a specified height

  15. Aircraft operations management manual

    1992-01-01

    The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.

  16. EML procedures manual

    Volchok, H.L.; de Planque, G.

    1982-01-01

    This manual contains the procedures that are used currently by the Environmental Measurements Laboratory of the US Department of Energy. In addition a number of analytical methods from other laboratories have been included. These were tested for reliability at the Battelle, Pacific Northwest Laboratory under contract with the Division of Biomedical and Environmental Research of the AEC. These methods are clearly distinguished. The manual is prepared in loose leaf form to facilitate revision of the procedures and inclusion of additional procedures or data sheets. Anyone receiving the manual through EML should receive this additional material automatically. The contents are as follows: (1) general; (2) sampling; (3) field measurements; (4) general analytical chemistry; (5) chemical procedures; (6) data section; (7) specifications

  17. Nuclear material operations manual

    Tyler, R.P.

    1981-02-01

    This manual provides a concise and comprehensive documentation of the operating procedures currently practiced at Sandia National Laboratories with regard to the management, control, and accountability of nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  18. Salinas : theory manual.

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2011-11-01

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas, we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

  19. Nuclear material operations manuals

    Tyler, R.P.

    1979-06-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations-management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of playscripts in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  20. Nuclear material operations manual

    Tyler, R.P.; Gassman, L.D.

    1978-04-01

    This manual is intended to provide a concise and comprehensive documentation of the operating procedures currently practiced at Sandia Laboratories with regard to the management, control, and accountability of radioactive and nuclear materials. The manual is divided into chapters which are devoted to the separate functions performed in nuclear material operations--management, control, accountability, and safeguards, and the final two chapters comprise a document which is also issued separately to provide a summary of the information and operating procedures relevant to custodians and users of radioactive and nuclear materials. The manual also contains samples of the forms utilized in carrying out nuclear material activities. To enhance the clarity of presentation, operating procedures are presented in the form of ''play-scripts'' in which the responsible organizations and necessary actions are clearly delineated in a chronological fashion from the initiation of a transaction to its completion

  1. Child Labor, Learning Problems, and Poverty

    Taylor, Mark

    2017-01-01

    In Africa, approximately 80 million children are working. Africa's 41% child labor rate is nearly twice as high as that in Asia. This study examined whether child labor is a direct result of poverty or of reading and math problems in school. The study analyzed reading and math scores of 62 child laborers and 62 non-child laborers from a farming…

  2. Tax Policy and Labor Market Performance

    Bovenberg, A.L.

    2003-01-01

    In exploring the impact of tax policy on labor-market performance, the paper first investigates how tax reform impacts labor supply and equilibrium unemployment in representative agent models.The impact of tax policy on labor market performance depends importantly on various other labor-market

  3. MANUAL LOGIC CONTROLLER (MLC)

    Claude Ziad Bayeh

    2015-01-01

    The “Manual Logic Controller” also called MLC, is an electronic circuit invented and designed by the author in 2008, in order to replace the well known PLC (Programmable Logic Controller) in many applications for its advantages and its low cost of fabrication. The function of the MLC is somewhat similar to the well known PLC, but instead of doing it by inserting a written program into the PLC using a computer or specific software inside the PLC, it will be manually programmed in a manner to h...

  4. Beyond the Manual Channel

    , the main focus there is on spoken languages in their written and spoken forms. This series of workshops, however, offers a forum for researchers focussing on sign languages. For the fourth time, the workshop had sign language corpora as its main topic. This time, the focus was on any aspect beyond...... the manual channel. Not surprisingly, most papers deal with non-manuals on the face. Once again, the papers at this workshop clearly identify the potentials of even closer cooperation between sign linguists and sign language engineers, and we think it is events like this that contribute a lot to a better...

  5. Radar and ARPA manual

    Bole, A G

    2013-01-01

    Radar and ARPA Manual focuses on the theoretical and practical aspects of electronic navigation. The manual first discusses basic radar principles, including principles of range and bearing measurements and picture orientation and presentation. The text then looks at the operational principles of radar systems. Function of units; aerial, receiver, and display principles; transmitter principles; and sitting of units on board ships are discussed. The book also describes target detection, Automatic Radar Plotting Aids (ARPA), and operational controls of radar systems, and then discusses radar plo

  6. TRUBA User Manual

    Tereshchenko, M. A.; Castejon, F.; Cappa, A.

    2008-04-25

    The TRUBA (pipeline in Russian) code is a computational tool for studying the propagation of Gaussian-shaped microwave beams in a prescribed equilibrium plasma. This manual covers the basic material handed to use the implementation of TRUBA (version 3,4) interfaced with the numerical library of the TJ-II stellarator. The manual provides a concise theoretical background of the problem, specifications for setting up the input files and interpreting the output of the code, and some information useful in modifying TRUBA. (Author) 13 refs.

  7. TRUBA User Manual

    Tereshchenko, M. A.; Castejon, F.; Cappa, A.

    2008-01-01

    The TRUBA (pipeline in Russian) code is a computational tool for studying the propagation of Gaussian-shaped microwave beams in a prescribed equilibrium plasma. This manual covers the basic material handed to use the implementation of TRUBA (version 3,4) interfaced with the numerical library of the TJ-II stellarator. The manual provides a concise theoretical background of the problem, specifications for setting up the input files and interpreting the output of the code, and some information useful in modifying TRUBA. (Author) 13 refs

  8. Netbooks The Missing Manual

    Biersdorfer, J

    2009-01-01

    Netbooks are the hot new thing in PCs -- small, inexpensive laptops designed for web browsing, email, and working with web-based programs. But chances are you don't know how to choose a netbook, let alone use one. Not to worry: with this Missing Manual, you'll learn which netbook is right for you and how to set it up and use it for everything from spreadsheets for work to hobbies like gaming and photo sharing. Netbooks: The Missing Manual provides easy-to-follow instructions and lots of advice to help you: Learn the basics for using a Windows- or Linux-based netbookConnect speakers, printe

  9. Security electronics circuits manual

    MARSTON, R M

    1998-01-01

    Security Electronics Circuits Manual is an invaluable guide for engineers and technicians in the security industry. It will also prove to be a useful guide for students and experimenters, as well as providing experienced amateurs and DIY enthusiasts with numerous ideas to protect their homes, businesses and properties.As with all Ray Marston's Circuits Manuals, the style is easy-to-read and non-mathematical, with the emphasis firmly on practical applications, circuits and design ideas. The ICs and other devices used in the practical circuits are modestly priced and readily available ty

  10. RELAP-7 Theory Manual

    Berry, Ray Alden [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zou, Ling [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhao, Haihua [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Hongbin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Peterson, John William [Idaho National Lab. (INL), Idaho Falls, ID (United States); Martineau, Richard Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States); Kadioglu, Samet Yucel [Idaho National Lab. (INL), Idaho Falls, ID (United States); Andrs, David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    This document summarizes the physical models and mathematical formulations used in the RELAP-7 code. In summary, the MOOSE based RELAP-7 code development is an ongoing effort. The MOOSE framework enables rapid development of the RELAP-7 code. The developmental efforts and results demonstrate that the RELAP-7 project is on a path to success. This theory manual documents the main features implemented into the RELAP-7 code. Because the code is an ongoing development effort, this RELAP-7 Theory Manual will evolve with periodic updates to keep it current with the state of the development, implementation, and model additions/revisions.

  11. CHILD LABOR ABUSE: LEGAL ASPECTS

    Darko Majhoshev

    2016-01-01

    Full Text Available The paper addresses the problem of child labor and ways of protection from child labor abuse. Child labor is a negative social phenomenon that is widespread throughout the world, and also in Republic of Macedonia. International and national institutions and organizations are making serious efforts to eradicate this negative phenomenon, through the adoption of numerous international legal instruments (conventions, recommendations, declarations, etc.. Child labor as a phenomenon refers to the employment of children in any work that deprives children of their childhood, interferes with their ability of education, and that is socially, mentally, physically, or morally dangerous and harmful. All international organizations define this practice as exploitative and destructive to the development of the whole society. With international legal instruments of the UN, ILO, Council of Europe and the EU child labor is strictly prohibited. There are some important differences which exist between the many kinds of work that is done by children. Some of them are demanding and difficult, others are hazardous and morally reprehensible. Children are doing a very wide range of activities and tasks when they work.

  12. A Theory of Exploitative Child Labor

    Carol Ann Rogers; Kenneth A. Swinnerton

    2003-01-01

    Child labor laws should aim to protect children who work, instead of trying to remove children from work. In this paper, we identify an instance when the risk of exploitation lowers the expected bene…t of child labor to the child,and therefore suppresses child labor force participation. Targeted legal intervention that lowers or removes the risk of exploitation raises child participation in the labor market, child welfare, and overall societal welfare. Targeting on child labor more broadly ma...

  13. Publishing high-quality climate data on the semantic web

    Woolf, Andrew; Haller, Armin; Lefort, Laurent; Taylor, Kerry

    2013-04-01

    The effort over more than a decade to establish the semantic web [Berners-Lee et. al., 2001] has received a major boost in recent years through the Open Government movement. Governments around the world are seeking technical solutions to enable more open and transparent access to Public Sector Information (PSI) they hold. Existing technical protocols and data standards tend to be domain specific, and so limit the ability to publish and integrate data across domains (health, environment, statistics, education, etc.). The web provides a domain-neutral platform for information publishing, and has proven itself beyond expectations for publishing and linking human-readable electronic documents. Extending the web pattern to data (often called Web 3.0) offers enormous potential. The semantic web applies the basic web principles to data [Berners-Lee, 2006]: using URIs as identifiers (for data objects and real-world 'things', instead of documents) making the URIs actionable by providing useful information via HTTP using a common exchange standard (serialised RDF for data instead of HTML for documents) establishing typed links between information objects to enable linking and integration Leading examples of 'linked data' for publishing PSI may be found in both the UK (http://data.gov.uk/linked-data) and US (http://www.data.gov/page/semantic-web). The Bureau of Meteorology (BoM) is Australia's national meteorological agency, and has a new mandate to establish a national environmental information infrastructure (under the National Plan for Environmental Information, NPEI [BoM, 2012a]). While the initial approach is based on the existing best practice Spatial Data Infrastructure (SDI) architecture, linked-data is being explored as a technological alternative that shows great promise for the future. We report here the first trial of government linked-data in Australia under data.gov.au. In this initial pilot study, we have taken BoM's new high-quality reference surface

  14. Emotional labor in nursing praxis

    José Manuel da Silva Vilelas

    Full Text Available Healthcare work is, by nature, an activity full of intense emotions and therefore, is opportune ground for exploring emotions in the workplace in different contexts of nursing care. It is a very fertile terrain if care is focused on the emotions of the client, nurses, healthcare teams, and on the interaction of all actors involved. This article presents a theoretical reflection exploring the concept of emotional labor in the context of nursing care. Theoretical references from several fields of knowledge, namely sociology and nursing, have been adopted to conceptualize the theme. Studies on emotional labor have contributed toward the understanding of the key issue of emotional management in healthcare institutions and both its positive and negative impact on clients and professionals. The development of the theme of emotional labor in nursing has given rise to numerous theoretical approaches and perspectives explaining this concept.

  15. 76 FR 67104 - Child Labor Regulations, Orders and Statements of Interpretation; Child Labor Violations-Civil...

    2011-10-31

    ... DEPARTMENT OF LABOR Wage and Hour Division 29 CFR Parts 570 and 579 RIN 1235-AA06 Child Labor Regulations, Orders and Statements of Interpretation; Child Labor Violations--Civil Money Penalties AGENCY... child labor regulations published on September 2, 2011. The Department of Labor (Department or DOL) is...

  16. Nuclear electronics laboratory manual

    1984-05-01

    The Nuclear Electronics Laboratory Manual is a joint product of several electronics experts who have been associated with IAEA activity in this field for many years. The manual does not include experiments of a basic nature, such as characteristics of different active electronics components. It starts by introducing small electronics blocks, employing one or more active components. The most demanding exercises instruct a student in the design and construction of complete circuits, as used in commercial nuclear instruments. It is expected that a student who completes all the experiments in the manual should be in a position to design nuclear electronics units and also to understand the functions of advanced commercial instruments which need to be repaired or maintained. The future tasks of nuclear electronics engineers will be increasingly oriented towards designing and building the interfaces between a nuclear experiment and a computer. The manual pays tribute to this development by introducing a number of experiments which illustrate the principles and the technology of interfacing

  17. General Drafting. Technical Manual.

    Department of the Army, Washington, DC.

    The manual provides instructional guidance and reference material in the principles and procedures of general drafting and constitutes the primary study text for personnel in drafting as a military occupational specialty. Included is information on drafting equipment and its use; line weights, conventions and formats; lettering; engineering charts…

  18. Manual for subject analysis

    2002-01-01

    This document is one in a series of publications known as the ETDE/INIS Joint Reference Series and also constitutes a part of the ETDE Procedures Manual. It presents the rules, guidelines and procedures to be adopted by centers submitting input to the International Nuclear Information System (INIS) or the Energy Technology Data Exchange (ETDE). It is a manual for the subject analysis part of input preparation, meaning the selection, subject classification, abstracting and subject indexing of relevant publications, and is to be used in conjunction with the Thesauruses, Subject Categories documents and the documents providing guidelines for the preparation of abstracts. The concept and structure of the new manual are intended to describe in a logical and efficient sequence all the steps comprising the subject analysis of documents to be reported to INIS or ETDE. The manual includes new chapters on preparatory analysis, subject classification, abstracting and subject indexing, as well as rules, guidelines, procedures, examples and a special chapter on guidelines and examples for subject analysis in particular subject fields. (g.t.; a.n.)

  19. Aquatic Microbiology Laboratory Manual.

    Cooper, Robert C.; And Others

    This laboratory manual presents information and techniques dealing with aquatic microbiology as it relates to environmental health science, sanitary engineering, and environmental microbiology. The contents are divided into three categories: (1) ecological and physiological considerations; (2) public health aspects; and (3)microbiology of water…

  20. IAEA safeguards technical manual

    1980-02-01

    The necessity for statistical inference procedures arises because of time and cost limitations imposed on inspection activities, and also because of inherent limitations of inspection measurement instruments and techniques. This manual produces statistical concepts and techniques in the field of nuclear material control

  1. Tokai densitometer manual

    Sprinkle, J.K. Jr.; Hsue, S.T.; Junck, K.

    1987-01-01

    In 1979, the Tokai densitometer was installed at the Tokai Reprocessing Plant in Tokai, Japan. It uses a nondestructive active technique (K-edge absorption densitometry) to assay solutions for plutonium content. The original hardware was upgraded in 1984 and 1985. This manual describes the instrument's operation after the upgrade. 2 refs

  2. Political Education Manual.

    League of United Latin American Citizens, Washington, DC.

    Written to help Hispanics understand the electoral process more thoroughly and to encourage them to participate more actively in the political arena, this manual begins by describing the present status of the Hispanic electorate and then explains how laws are made, how Hispanics can influence legislation, and how to organize a voter registration…

  3. Coulometer operator's manual

    Criscuolo, A.L.

    1977-07-01

    The coulometer control system automates the titration of uranium and plutonium as performed by the CMB-1 group. The system consists of a printer, microcontroller, and coulometer, all of which are controlled by an algorithm stored in the microcontroller read-only memory. This manual describes the titration procedure using the coulometer control system, its theory and maintenance

  4. ABCC publication manual

    1959-01-01

    The reporting policy of the Atomic Bomb Casualty Commission is described in detail in this manual. Specific topics covered are: research project register; research publication policy; USA publication procedures; Japan publication procedures, report preparation instructions; and a glossary of institutions terms, phrases, and symbols. 15 figures. (DMC)

  5. Matematica 3. Manual.

    D'Alu, Maria Jose Miranda de Sousa

    This teachers manual accompanies a mathematics textbook, written in Portuguese, for third graders. It closely follows the objectives and methodology of the major curricula used throughout the schools in the United States. The 11 chapters deal with: numeration (0-999,999); addition with and without regrouping; subtraction with and without…

  6. Manual on industrial radiography

    1981-08-01

    This manual is intended as a source of educational material to personnel seeking certification as industrial radiographers, and as a guide and reference text for educational organizations that are providng courses in industrial radiography. It covers the basic principles of x-ray and gamma radiation, radiation safety, films and film processing, welding, casting and forging, aircraft structures and components, radiographic techniques, and records

  7. Idaho Safety Manual.

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This manual is intended to help teachers, administrators, and local school boards develop and institute effective safety education as a part of all vocational instruction in the public schools of Idaho. This guide is organized in 13 sections that cover the following topics: introduction to safety education, legislation, levels of responsibility,…

  8. Functional Assessment Inventory Manual.

    Crewe, Nancy M.; Athelstan, Gary T.

    This manual, which provides extensive new instructions for administering the Functional Assessment Inventory (FAI), is intended to enable counselors to begin using the inventory without undergoing any special training. The first two sections deal with the need for functional assessment and issues in the development and use of the inventory. The…

  9. Manual Hydraulic Structures

    Molenaar, W.F.; Voorendt, M.Z.

    This manual is the result of group work and origins in Dutch lecture notes that have been used since long time. Amongst the employees of the Hydraulic Engineering Department that contributed to this work are dr.ir. S. van Baars, ir.K.G.Bezuijen, ir.G.P.Bourguignon, prof.ir.A.Glerum,

  10. SNL Abuse Testing Manual.

    Orendorff, Christopher [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lamb, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Steele, Leigh Anna Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-07-01

    This report describes recommended abuse testing procedures for rechargeable energy storage systems (RESSs) for electric vehicles. This report serves as a revision to the FreedomCAR Electrical Energy Storage System Abuse Test Manual for Electric and Hybrid Electric Vehicle Applications (SAND2005-3123).

  11. Sexism in Parenting Manuals

    DeFrain, John D.

    1977-01-01

    Parental roles, as delineated in many of the popular parenting manuals on the market, are reviewed and assessed. It is concluded that the vast majority of authors of child-rearing guides implicity or explicitly endorse the traditional roles of father as the dominant breadwinner and mother as the nurturant caretaker. (Author)

  12. Rescue Manual. Module 6.

    Ohio State Univ., Columbus. Instructional Materials Lab.

    This learner manual for rescuers covers the current techniques or practices required in the rescue service. The sixth of 10 modules contains 4 chapters: (1) industrial rescue; (2) rescue from a confined space; (3) extrication from heavy equipment; and (4) rescue operations involving elevators. Key points, an introduction, and conclusion accompany…

  13. Manually operated coded switch

    Barnette, J.H.

    1978-01-01

    The disclosure related to a manually operated recodable coded switch in which a code may be inserted, tried and used to actuate a lever controlling an external device. After attempting a code, the switch's code wheels must be returned to their zero positions before another try is made

  14. Waste Management Technical Manual

    Buckingham, J.S. [ed.

    1967-08-31

    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  15. Southern Ductile Training Manual.

    Alabama State Dept. of Education, Montgomery.

    This instructor's manual contains the materials required to conduct the competency-based workplace literacy program that was developed to help employees at a foundry that has evolved from a small, family-owned business into a major foundry group with several automated production systems. The workplace literacy program consists of 24 lessons in…

  16. NDS EXFOR Manual

    Lemmel, H.D.

    1979-06-01

    This manual contains the coding rules and formats and NDS internal compilation rules for the exchange format (EXFOR) for the transmission of nuclear reaction data between national and international nuclear data centres, and for the data storage and retrieval system of the IAEA Nuclear Data Section

  17. Consumer Decisions. Student Manual.

    Florida State Dept. of Education, Tallahassee. Div. of Vocational Education.

    This student manual covers five areas relating to consumer decisions. Titles of the five sections are Consumer Law, Consumer Decision Making, Buying a Car, Convenience Foods, and Books for Preschool Children. Each section may contain some or all of these materials: list of objectives, informative sections, questions on the information and answers,…

  18. NACS Store Planning Manual.

    College Store Journal, 1979

    1979-01-01

    Topics discussed by the NACS Store Planning/Renovation Committees in this updated version of the college store renovation manual include: short- and long-range planning, financial considerations, professional planning assistance, the store's image and business character, location considerations, building requirements, space requirements, fixtures,…

  19. Default Management Manual.

    Dent, Richard A.

    This manual is designed to instruct administrators of the Guaranteed Student Loan (GSL) Program in how to take every step possible to administer the program effectively and to minimize the program costs of serving the high risk student. It shows schools how to work with students throughout their time in school, create ownership of the loan(s) by…

  20. RRFC hardware operation manual

    Abhold, M.E.; Hsue, S.T.; Menlove, H.O.; Walton, G.

    1996-05-01

    The Research Reactor Fuel Counter (RRFC) system was developed to assay the 235 U content in spent Material Test Reactor (MTR) type fuel elements underwater in a spent fuel pool. RRFC assays the 235 U content using active neutron coincidence counting and also incorporates an ion chamber for gross gamma-ray measurements. This manual describes RRFC hardware, including detectors, electronics, and performance characteristics

  1. CANAL user's manual

    Faya, A.; Wolf, L.; Todreas, N.

    1979-11-01

    CANAL is a subchannel computer program for the steady-state and transient thermal hydraulic analysis of BWR fuel rod bundles. The purpose of this manual is to introduce the user into the mechanism of running the code by providing information about the input data and options

  2. AELIB user's manual

    Evans, L.E.; Klawitter, G.L.

    1981-05-01

    This report is an updatable manual for users of AELIB, the AECL Library of FORTRAN-callable routines for the CRNL CDC 6600/CYBER 170 system. It provides general advice on the use of this library and detailed information on the selection and usage of particular library routines

  3. Water Quality Monitoring Manual.

    Mason, Fred J.; Houdart, Joseph F.

    This manual is designed for students involved in environmental education programs dealing with water pollution problems. By establishing a network of Environmental Monitoring Stations within the educational system, four steps toward the prevention, control, and abatement of water pollution are proposed. (1) Train students to recognize, monitor,…

  4. Labor Economics and Sociology of Labor: Demarkation Problem

    S N Lebedev

    2011-06-01

    Full Text Available The article deals with important economic and sociological problems taking into account their relevance to economics and sociology of labor as two independent sciences. The author suggests some demarcation boundaries of the concepts relevant to contemporary life within these two disciplines.

  5. Clandestine labor migration to Taiwan.

    Tsay, C

    1992-01-01

    "Illegal migration to Taiwan is a recent phenomenon but with a rapid rate of increase. Most illegal foreign workers enter on visitor's visas and overstay. This paper's detailed analysis of official data reveals that Malaysia, Philippines, Indonesia and Thailand are the major sources, providing a stock of mostly male workers numbering around 40,000. Sociodemographic and attitudinal changes among Taiwanese workers coupled with labor shortages in low-skilled jobs are pressuring the Taiwanese government to formulate plans for a systematic importation of foreign labor." excerpt

  6. Class, Race and American Labor

    Catherine Collomp

    2006-03-01

    Full Text Available Labor history in the United States is well‑chartered territory. It is the object of countless scholarly books, appears in many college and university curricula and it is the subject of on‑going revisions and debates. Although labor history has always implied a form of at least implicit social commitment, it has been commented upon and written about as abundantly as other aspects of social history and often with more stamina or vindication. Nineteenth and early twentieth‑century working class ...

  7. Labor Market Discrimination: Vietnamese Immigrants

    Linus Yamane

    2012-01-01

    Full Text Available Vietnamese and East European immigrants face similar obstacles in the U.S. labor market. This provides for an interesting test of racial discrimination in the labor market. Does it make any difference if an immigrant is Asian or White? When Vietnamese immigrants are compared to East European immigrants, Vietnamese men earn 7-9% less than comparable East European men, with more discrimination among the less educated, and in the larger Vietnamese population centers like California. Vietnamese women earn as much as comparable East European women. Vietnamese immigrants, male and female, are much less likely to hold managerial and supervisory positions than comparable East European immigrants.

  8. Labor Market Discrimination: Vietnamese Immigrants

    Linus Yamane

    2012-01-01

    Full Text Available Vietnamese and East European immigrants face similar obstacles in the US labor market. This provides for an interesting test of racial discrimination in the labor market. Does it make any difference if an immigrant is Asian or White? When Vietnamese immigrants are compared to East European immigrants, Vietnamese men earn 7-9% less than comparable East European men, with more discrimination among the less educated, and in the larger Vietnamese population centers like California. Vietnamese women earn as much as comparable East European women. Vietnamese immigrants, male and female, are much less likely to hold managerial and supervisory positions than comparable East European immigrants.

  9. Hypnotherapy for labor and birth.

    Beebe, Kathleen R

    2014-01-01

    Hypnotherapy is an integrative mind-body technique with therapeutic potential in various health care applications, including labor and birth. Evaluating the efficacy of this modality in controlled studies can be difficult, because of methodologic challenges, such as obtaining adequate sample sizes and standardizing experimental conditions. Women using hypnosis techniques for childbirth in hospital settings may face barriers related to caregiver resistance or institutional policies. The potential anxiolytic and analgesic effects of clinical hypnosis for childbirth merit further study. Nurses caring for women during labor and birth can increase their knowledge and skills with strategies for supporting hypnotherapeutic techniques. © 2014 AWHONN.

  10. Inequality in Preschool Quality? Community-Level Disparities in Access to High-Quality Learning Environments

    Bassok, Daphna; Galdo, Eva

    2016-01-01

    In recent years, unequal access to high-quality preschool has emerged as a growing public policy concern. Because of data limitations, it is notoriously difficult to measure disparities in access to early learning opportunities across communities and particularly challenging to quantify gaps in access to "high-quality" programs. Research…

  11. Missouri Highway Safety Manual Recalibration

    2018-05-01

    The Highway Safety Manual (HSM) is a national manual for analyzing the highway safety of various facilities, including rural roads, urban arterials, freeways, and intersections. The HSM was first published in 2010, and a 2014 supplement addressed fre...

  12. Developing a Pupil Transportation Manual.

    Douglas, Dave

    1987-01-01

    District-level pupil transportation manuals that contain clear, concise information about objectives, policies, and regulations are a must. These manuals should also specify procedures concerning evaluation processes, personnel recruitment and selection, and the driver training program. (MLH)

  13. 77 FR 31549 - Child Labor Regulations, Orders and Statements of Interpretation; Child Labor Violations-Civil...

    2012-05-29

    ... DEPARTMENT OF LABOR Wage and Hour Division 29 CFR Parts 570 and 579 RIN 1235-AA06 Child Labor Regulations, Orders and Statements of Interpretation; Child Labor Violations--Civil Money Penalties AGENCY... its [[Page 31550

  14. A global strategy for labor.

    Faux, Jeff

    2002-01-01

    The rules of the global market were established to protect the interests of investors at the expense of workers and they shift benefits to investors, costs to workers. Globalization is measured by the interests of investors. But 20 years of investor protectionism show that growth has slowed and equality has gotten worse. The purpose of neo-liberal policies has been to discipline labor to free capital from having to bargain with workers over gains from rising productivity. But such bargaining is the essence of a democratic market. Uncontrolled globalization puts government's domestic policies on the side of capital. In an economy whose growth depends on foreign markets, rising domestic wages make it harder to compete internationally. There has been a general deterioration of labor's position relative to capital's. A global marketplace implies a global politics, and the real work happens when representatives of multi-national business privately negotiate the rules. Labor must change the framework in which the investor class pursues its interest across borders, while workers are constricted by borders. Labor unions are critical; they can deny the human resource necessary for profits. The strike is the ultimate threat to investors. One solution: a "grand bargain" linking development with broadly increased living standards connected to planning for sustainable development to create a global social contract. Workers have advantages: they are the majority and they are indispensable.

  15. Seven Important Labor Force Trends.

    Bailey, John A.

    1982-01-01

    Presents statistics on the changing human resources mix in the labor force, which vocational counselors should be aware of. Trends include higher percentages of women working, and older men and married men leaving the work force. One result is an increasing number of persons are able to retire earlier. (JAC)

  16. Misguided guidelines for managing labor.

    Cohen, Wayne R; Friedman, Emanuel A

    2015-06-01

    In a recent review we expressed concerns about new guidelines for the assessment and management of labor recommended jointly by the American Congress of Obstetricians and Gynecologists (ACOG) and the Society for Maternal-Fetal Medicine (SMFM). These guidelines are based heavily on a new concept of how cervical dilatation and fetal descent progress, derived from the work of Zhang et al. In their Viewpoint article they have addressed, but not allayed, the concerns we described in our review. We assert that the dilatation curve promulgated by Zhang et al cannot be reconciled with direct clinical observation. Even if they were correct, however, it still does not follow that the ACOG/SMFM guidelines should recommend replacing the coherent system of identifying and managing labor aberrations described by Friedman. That system is grounded in well-established clinical principles based on decades of use and the objectively documented association of some labor abnormalities with poor fetal and maternal outcomes. Recommendations for new clinical management protocols should require the demonstration of superior outcomes through extensive, preferably prospective, assessment. Using untested guidelines for the management of labor may adversely affect women and children. Even if those guidelines were to reduce the currently excessive cesarean delivery rate, the price of that benefit is likely to be a trade-off in harm to parturients and their offspring. The nature and degree of that harm needs to be documented before considering adoption of the guidelines. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Analysis of High Quality Agar wood Oil Chemical Compounds By Means Of SPME/ GC-MS and Z-Score Technique

    Nurlaila Ismail; Mohd Ali Nor Azah; Mailina Jamil; Saiful Nizam Tajuddin; Mohd Nasir Taib

    2013-01-01

    Currently, the grading of the agar wood oil to the high and low quality is done using manually such as human trained grader. It was performed based on the agar wood oil physical properties such as human experience and perception and the oil colour, odor and long lasting aroma. Several researchers found that chemical profiles of the oil should be utilized to overcome the problem facing by manual techniques for example human nose cannot tolerate with the many oils at the same time, so that accurate result can be obtained in grading the agar wood oil. The analysis involved of SPME/ GC-MS and Z-score techniques have been proposed in this study to analyze the chemical compounds especially from the high quality samples of agar wood oil (Aquilariamalaccensis) from Malaysia. Two SPME fibers were used such as divinylbenzene-carbogen-polydimethylsiloxane (DVB-CAR-PDMS) and polydimethylsiloxane (PDMS) in extracting the oils compound under three different sampling temperature conditions such as 40, 60 and 80 degree Celsius. The chemical compounds extracted by SPME/ GC-MS were analyzed. The chemical compounds as identified by Z-score as significant compounds were discussed before the conclusion is made. It was found that 10-epi-γ-eudesmol, aromadendrene, β-agar ofuran, α-agar ofuran and γ-eudesmol were highlighted as significant for high quality agar wood oil and can be used as a marker compounds in classifying the agar wood oil. (author)

  18. Update of the Dutch manual for costing studies in health care.

    Tim A Kanters

    Full Text Available Dutch health economic guidelines include a costing manual, which describes preferred research methodology for costing studies and reference prices to ensure high quality studies and comparability between study outcomes. This paper describes the most important revisions of the costing manual compared to the previous version.An online survey was sent out to potential users of the costing manual to identify topics for improvement. The costing manual was aligned with contemporary health economic guidelines. All methodology sections and parameter values needed for costing studies, particularly reference prices, were updated. An expert panel of health economists was consulted several times during the review process. The revised manual was reviewed by two members of the expert panel and by reviewers of the Dutch Health Care Institute.The majority of survey respondents was satisfied with content and usability of the existing costing manual. Respondents recommended updating reference prices and adding some particular commonly needed reference prices. Costs categories were adjusted to the international standard: 1 costs within the health care sector; 2 patient and family costs; and 3 costs in other sectors. Reference prices were updated to reflect 2014 values. The methodology chapter was rewritten to match the requirements of the costing manual and preferences of the users. Reference prices for nursing days of specific wards, for diagnostic procedures and nurse practitioners were added.The usability of the costing manual was increased and parameter values were updated. The costing manual became integrated in the new health economic guidelines.

  19. The political economy of child labor

    Maffei, Alessandro

    2005-01-01

    The phenomenon of child labor is widespread in developing countries and emotionally discussed in the media and public. At present there is a well-developed and fast growing economic literature on child labor which covers the various aspects of child labor. In the first part of the thesis we give a survey about the facts, the institutions and the economic literature dealing with child labor. The economic theory of child labor can be roughly subdivided into the economic theory of child labor i...

  20. Large Hadron Collider manual

    Lavender, Gemma

    2018-01-01

    What is the universe made of? How did it start? This Manual tells the story of how physicists are seeking answers to these questions using the world’s largest particle smasher – the Large Hadron Collider – at the CERN laboratory on the Franco-Swiss border. Beginning with the first tentative steps taken to build the machine, the digestible text, supported by color photographs of the hardware involved, along with annotated schematic diagrams of the physics experiments, covers the particle accelerator’s greatest discoveries – from both the perspective of the writer and the scientists who work there. The Large Hadron Collider Manual is a full, comprehensive guide to the most famous, record-breaking physics experiment in the world, which continues to capture the public imagination as it provides new insight into the fundamental laws of nature.

  1. NDS EXFOR manual

    Lemmel, H.D.

    1996-01-01

    EXFOR is the agreed exchange format for the transmission of nuclear reaction data between national and international nuclear data centers for the benefit of nuclear data users in all countries. The IAEA Nuclear Data Section uses the EXFOR system not only for the center-to-center data exchange but also as its data storage and retrieval system. This NDS EXFOR MANUAL therefore contains the agreed EXFOR coding rules and format, supplemented by NDS internal compilation rules. The EXFOR system and the EXFOR nuclear data library with several million data records originate from the cooperation of an increasing number of data centers whose names and addresses can be found inside the Manual. Their contributions and cooperative efforts are gratefully acknowledged. (author)

  2. Radiation protection manual

    Spang, A.

    1983-01-01

    According to the Radiation Protection Ordinance, radiation protection experts directing or supervising the handling of radioactive materials must have expert knowledge. The concept of expert knowledge has been clearly defined by the Fachverband e.V. in a catalogue of instruction goals. The manual follows the principles of this catalogue; it presents the expert knowledge required in a total of 15 subject groups. There is an index which helps the reader to find his specific subject group and the knowledge required of him in this subject group. However, the manual gives only an outline of the subject matter in many instances and should therefore not be regarded as a textbook in the proper sense. (orig./HP) [de

  3. REBA experimenters' manual

    Schuch, R.L.

    1977-04-01

    The REBA is a high-energy, pulsed electron beam or bremsstrahlung x-ray generator whose operational purpose is to provide an energy source of short duration for conducting experiments, primarily to determine material responses to rapid surface and in-depth deposition of energy. The purpose of this manual is to serve as a basic source of information for prospective users of REBA. Included is a brief discussion of the design and operation of the facility as well as a summary of output characteristics for electron beam modes and environmental data for x-ray operation. The manual also contains a description of the REBA experimental facilities, including geometry of the test cell, instrumentation and data collection capabilities, and services and support available to experimenters

  4. The environmental survey manual

    1987-08-01

    The purpose of this manual is to provide guidance to the Survey and Sampling and Analysis teams that conduct the one-time Environmental Survey of the major US Department of Energy (DOE) operating facilities. This manual includes a discussion of DOE's policy on environmental issues, a review of statutory guidance as it applies to the Survey, the procedures and protocols to be used by the Survey teams, criteria for the use of the Survey teams in evaluating existing environmental data for the Survey effort, generic technical checklists used in every Survey, health and safety guidelines for the personnel conducting the Survey, including the identification of potential hazards, prescribed protective equipment, and emergency procedures, the required formats for the Survey reports, guidance on identifying environmental problems that need immediate attention by the Operations Office responsible for the particular facility, and procedures and protocols for the conduct of sampling and analysis

  5. NDS EXFOR manual

    Lemmel, H.D.

    1985-08-01

    EXFOR is the agreed exchange format for the transmission of nuclear reaction data between national and international nuclear data centers for the benefit of nuclear data users in all countries. The IAEA Nuclear Data Section uses the EXFOR system not only for the center-to-center data exchange but also as its data storage and retrieval system. This NDS EXFOR MANUAL therefore contains the agreed EXFOR coding rules and format, supplemented by NDS internal compilation rules. The EXFOR system and the EXFOR nuclear data library with several million data records originate from the cooperation of an increasing number of data centers whose names and addresses can be found inside the Manual. Their contributions and cooperative efforts are gratefully acknowledged. (author)

  6. MINTEQ user's manual

    Peterson, S.R.; Hostetler, C.J.; Deutsch, W.J.; Cowan, C.E.

    1987-02-01

    This manual will aid the user in applying the MINTEQ geochemical computer code to model aqueous solutions and the interactions of aqueous solutions with hypothesized assemblages of solid phases. The manual will provide a basic understanding of how the MINTEQ computer code operates and the important principles that are incorporated into the code and instruct a user of the MINTEQ code on how to create input files to simulate a variety of geochemical problems. Chapters 2 through 8 are for the user who has some experience with or wishes to review the principles important to geochemical computer codes. These chapters include information on the methodology MINTEQ uses to incorporate these principles into the code. Chapters 9 through 11 are for the user who wants to know how to create input data files to model various types of problems. 35 refs., 2 figs., 5 tabs

  7. Auxiliary mine ventilation manual

    Workplace Safety North

    2010-01-01

    An adequate ventilation system is needed for air quality and handling in a mine and is comprised of many different pieces of equipment for removing contaminated air and supplying fresh air and thereby provide a satisfactory working environment. This manual highlights auxiliary ventilation systems made up of small fans, ducts, tubes, air movers, deflectors and additional air flow controls which distribute fresh air delivered by the primary system to all areas. A review of auxiliary ventilation is provided. Design, operation and management issues are discussed and guidelines are furnished. This manual is limited to underground hard rock operations and does not address directly other, specific auxiliary systems, either in underground coal mines or uranium mines.

  8. Auxiliary mine ventilation manual

    Workplace Safety North

    2010-07-01

    An adequate ventilation system is needed for air quality and handling in a mine and is comprised of many different pieces of equipment for removing contaminated air and supplying fresh air and thereby provide a satisfactory working environment. This manual highlights auxiliary ventilation systems made up of small fans, ducts, tubes, air movers, deflectors and additional air flow controls which distribute fresh air delivered by the primary system to all areas. A review of auxiliary ventilation is provided. Design, operation and management issues are discussed and guidelines are furnished. This manual is limited to underground hard rock operations and does not address directly other, specific auxiliary systems, either in underground coal mines or uranium mines.

  9. Laboratory biosafety manual

    1983-01-01

    This book is in three sections; basic standards of laboratory design and equipment; procedures for safe laboratory practice; and the selection and use of essential biosafety equipment. The intention is that the guidance given in the book should have a broad basis and international application, and that it should be a source from which manuals applicable to local and special conditions can be usefully derived.

  10. Oil trading manual

    Long, D.

    1995-01-01

    This manual provides basic information on all aspects of oil trading. Topics reviewed in Part 1 include physical characteristics and refining and oil pricing arrangements. Part 2 on instruments and markets contains chapters on crude oil markets, product markets, forward and futures contracts, forward paper markets, oil future exchanges, options, swaps and long term oil markets. Part 3 deals with administration and has chapters on operations and logistics, credit control, accounting, taxation of oil trading, contracts and legal and regulatory issues. (UK)

  11. Manual of Radiation Protection

    Gambini, D.J.; Granier, R.; Boisserie, G.

    1992-01-01

    This manual explains the principles and practice of radiation protection for those whose work in research, in the field of medicine or in the industry requires the use of radiation sources. It provides the information radiation users need to protect themselves and others and to understand and comply with international recommendations, regulations and legislation regarding the use of radionuclides and radiation machines. It is designed to teach a wide audience of doctors, biologists, research scientists, technicians, engineers, students and others

  12. IAC user manual

    Vos, R. G.; Beste, D. L.; Gregg, J.

    1984-01-01

    The User Manual for the Integrated Analysis Capability (IAC) Level 1 system is presented. The IAC system currently supports the thermal, structures, controls and system dynamics technologies, and its development is influenced by the requirements for design/analysis of large space systems. The system has many features which make it applicable to general problems in engineering, and to management of data and software. Information includes basic IAC operation, executive commands, modules, solution paths, data organization and storage, IAC utilities, and module implementation.

  13. Program Management System manual

    1986-01-01

    The Program Management System (PMS), as detailed in this manual, consists of all the plans, policies, procedure, systems, and processes that, taken together, serve as a mechanism for managing the various subprograms and program elements in a cohesive, cost-effective manner. The PMS is consistent with the requirements of the Nuclear Waste Policy Act of 1982 and the ''Mission Plan for the Civilian Radioactive Waste Management Program'' (DOE/RW-0005). It is based on, but goes beyond, the Department of Energy (DOE) management policies and procedures applicable to all DOE programs by adapting these directives to the specific needs of the Civilian Radioactive Waste Management program. This PMS Manual describes the hierarchy of plans required to develop and maintain the cost, schedule, and technical baselines at the various organizational levels of the Civilian Radioactive Waste Management Program. It also establishes the management policies and procedures used in the implementation of the Program. These include requirements for internal reports, data, and other information; systems engineering management; regulatory compliance; safety; quality assurance; and institutional affairs. Although expanded versions of many of these plans, policies, and procedures are found in separate documents, they are an integral part of this manual. The PMS provides the basis for the effective management that is needed to ensure that the Civilian Radioactive Waste Management Program fulfills the mandate of the Nuclear Waste Policy Act of 1982. 5 figs., 2 tabs

  14. ETAP user's manual

    Watanabe, Norio; Higuchi, Suminori.

    1990-11-01

    The event tree analysis technique has been used in Probabilistic Safety Assessment for LWRs to delineate various accident scenarios leading to core melt or containment failure and to evaluate their frequencies. This technique often requires manual preparation of event trees with iterative process and time-consuming work in data handling. For the purpose of reducing manual efforts in event tree analysis, we developed a new software package named ETAP (Event Tree Analysis Supporting Program) for event tree analysis. ETAP is an interactive PC-based program which has the ability to construct, update, document, and quantify event trees. Because of its fast running capability to quantify event trees, use of the EATP program can make it easy to perform the sensitivity studies on a variety of system/containment performance issues. This report provides a user's manual for ETAP, which describes the structure, installation, and use of EATP. This software runs on NEC/PC-9800 or compatible PCs that have a 640 KB memory and MS-DOS 2.11 or higher. (author)

  15. Sodium safety manual

    Hayes, D.J.; Gardiner, R.L.

    1980-09-01

    The sodium safety manual is based upon more than a decade of experience with liquid sodium at Berkeley Nuclear Laboratories (BNL). It draws particularly from the expertise and experience developed in the course of research work into sodium fires and sodium water reactions. It draws also on information obtained from the UKAEA and other sodium users. Many of the broad principles will apply to other Establishments but much of the detail is specific to BNL and as a consequence its application at other sites may well be limited. Accidents with sodium are at best unpleasant and at worst lethal in an extremely painful way. The object of this manual is to help prevent sodium accidents. It is not intended to give detailed advice on specific precautions for particular situations, but rather to set out the overall strategy which will ensure that sodium activities will be pursued safely. More detail is generally conveyed to staff by the use of local instructions known as Sodium Working Procedures (SWP's) which are not reproduced in this manual although a list of current SWP's is included. Much attention is properly given to the safe design and operation of larger facilities; nevertheless evidence suggests that sodium accidents most frequently occur in small-scale work particularly in operations associated with sodium cleaning and special care is needed in all such cases. (U.K.)

  16. OASIS User Manual

    Bojtar, L

    2009-01-01

    The OASIS system has been operational for years now. After a long development the project has reached a state where the number of features it provides exceeds largely what most of its users knows about. The author felt it was time to write a user manual explaining all the functionality of the viewer application. This document is a user manual, concentrating on the functionality of the viewer from the user’s point of view. There are already documents available on the project’s web site about the technical aspects at http://project-oasis.web.cern.ch/project-oasis/presentations.htm . There was an attempt to produce a tutorial on the viewer, but it didn’t get much further than the table of contents, that however is well thought. The structure of this user manual follows the same principle, the basic and most often used features are grouped together. Advanced or less often used features are described in a separate chapter. There is a second organizational principle, features belong to different levels: chann...

  17. Increasing labor productivity - an important target for miners. [USSR

    1984-09-01

    The development of coal mining in the USSR from 1980 to 1983 is discussed. Factors which influence labor productivity increase are analyzed: use of equipment with increased productivity and reliability (e.g. the KM-103 and KD-80 face systems for thin coal seams, the ANShch integrated face systems for steep coal mines, the KMT and 2UKP systems for mining seams with roofs difficult to break down, the 4PP-2 and 4PP-2Shch heading machines), use of equipment replacing manual operations during underground mining, increasing role of surface coal mining which is characterized by labor productivity higher than in underground mining, use of more reliable mining systems in surface mining less influenced by low temperatures in winter (in Siberia), use of mining schemes optimized by means of computerized simulation and mathematical models both in underground and surface coal mining, reducing idletime of mining equipment, social and economic policy aimed at labor productivity increase and reducing absenteeism, improved training and refreshment courses for miners, use of automatic control systems in coal preparation plants, use of more productive equipment for coal preparation.

  18. Labor Dystocia: A Common Approach to Diagnosis.

    Neal, Jeremy L; Lowe, Nancy K; Schorn, Mavis N; Holley, Sharon L; Ryan, Sharon L; Buxton, Margaret; Wilson-Liverman, Angela M

    2015-01-01

    Contemporary labor and birth population norms should be the basis for evaluating labor progression and determining slow progress that may benefit from intervention. The aim of this article is to present guidelines for a common, evidence-based approach for determination of active labor onset and diagnosis of labor dystocia based on a synthesis of existing professional guidelines and relevant contemporary publications. A 3-point approach for diagnosing active labor onset and classifying labor dystocia-related labor aberrations into well-defined, mutually exclusive categories that can be used clinically and validated by researchers is proposed. The approach comprises identification of 1) an objective point that strictly defines active labor onset (point of active labor determination); 2) an objective point that identifies when labor progress becomes atypical, beyond which interventions aimed at correcting labor dystocia may be justified (point of protraction diagnosis); and 3) an objective point that identifies when interventions aimed at correcting labor dystocia, if used, can first be determined to be unsuccessful, beyond which assisted vaginal or cesarean birth may be justified (earliest point of arrest diagnosis). Widespread adoption of a common approach for diagnosing labor dystocia will facilitate consistent evaluation of labor progress, improve communications between clinicians and laboring women, indicate when intervention aimed at speeding labor progress or facilitating birth may be appropriate, and allow for more efficient translation of safe and effective management strategies into clinical practice. Correct application of the diagnosis of labor dystocia may lead to a decrease in the rate of cesarean birth, decreased health care costs, and improved health of childbearing women and neonates. © 2015 by the American College of Nurse-Midwives.

  19. Labor Market Characteristics and the Labor Force Participation of Individuals,

    1981-11-01

    dependent variable are well-known and range from frequent uninterpretability of results to bias in statistical tests (see, e.g., Hanushek and Jackson...shown that logit and probit analysis yield almost identical results near the means of relevant variables ( Hanushek and Jackson, 1977: 188- 189). We choose...general and lucid treatment of these and related points, see Hanushek and Jackson (1977:Ch. 7). Step 2: Analysis of labor market impact on individual

  20. 29 CFR 215.8 - Department of Labor contact.

    2010-07-01

    ... 29 Labor 2 2010-07-01 2010-07-01 false Department of Labor contact. 215.8 Section 215.8 Labor Regulations Relating to Labor OFFICE OF LABOR-MANAGEMENT STANDARDS, DEPARTMENT OF LABOR GUIDELINES, SECTION 5333(b), FEDERAL TRANSIT LAW § 215.8 Department of Labor contact. Questions concerning the subject...

  1. 77 FR 70473 - Child Labor, Forced Labor, and Forced or Indentured Child Labor in the Production of Goods in...

    2012-11-26

    ... 106- 200 (2002), established a new eligibility criterion for receipt of trade benefits under the... of benefits under CBTPA and AGOA, respectively. In addition, the Andean Trade Preference Act, as... Child Labor AGENCY: The Bureau of International Labor Affairs, United States Department of Labor. ACTION...

  2. Real-World Solutions for Developing High-Quality PHP Frameworks and Applications

    Bergmann, Sebastian

    2011-01-01

    Learn to develop high-quality applications and frameworks in PHP Packed with in-depth information and step-by-step guidance, this book escorts you through the process of creating, maintaining and extending sustainable software of high quality with PHP. World-renowned PHP experts present real-world case studies for developing high-quality applications and frameworks in PHP that can easily be adapted to changing business requirements. . They offer different approaches to solving  typical development and quality assurance problems that every developer needs to know and master.Details the process

  3. Failed labor induction: toward an objective diagnosis.

    Rouse, Dwight J

    2011-02-01

    To evaluate maternal and perinatal outcomes in women undergoing labor induction with an unfavorable cervix according to duration of oxytocin administration in the latent phase of labor after ruptured membranes.

  4. International Labor Organization's 75th Anniversary.

    Hansenne, Michel; And Others

    1994-01-01

    This special issue contains eight articles that examine the following: social justice, global employment issues, International Labor Organization (ILO) standards, social security, training, tripartism, the 1994 ILO conference, and labor standards--all from a global perspective. (JOW)

  5. Performance Related Pay and Labor Productivity

    Gielen, A. C.; Kerkhofs, M.J.M.; van Ours, J.C.

    2006-01-01

    This paper uses information from a panel of Dutch firms to investigate the labor productivity effects of performance related pay (PRP).We find that PRP increases labor productivity at the firm level with about 9%.

  6. Maritime Policy and the Seafaring Labor Market

    Lobrigo, Enrico; Pawlik, Thomas

    2015-01-01

    The reports highlighting the foreseen lack of merchant marine officers for the expanding world’s fleet calls for a review in evaluating the impact of maritime policy in the seafaring labor market. This paper aims to clarify the particular characteristics of the seafaring labor market and how it can...... be shaped by specific maritime labor policies. The seafaring labor market in the Philippines, Poland, Germany, and Brazil as well as the general maritime labor policies in these countries is discussed. The focus on these countries leads to a comparative observation of maritime labor as a factor...... of production in an exporting market, in an importing market, and in a closed market, respectively, as shaped by various relevant maritime policies. Since a global policy that can regulate the maritime labor market does not exist, the trend on maritime labor supply is dynamic on a per country basis wherein crew...

  7. "A Welcome Debate" over Labor Reform

    Warren, Cat

    2010-01-01

    This article presents an interview with Wilma B. Liebman, the new chair of the National Labor Relations Board (NLRB). In this interview, Liebman talks about labor law, academics, and reversing ossification.

  8. Water Breaking: Understand This Sign of Labor

    Healthy Lifestyle Labor and delivery, postpartum care Water breaking worries? Prepare yourself for childbirth by getting the facts about this important sign of labor. By Mayo Clinic Staff If you're ...

  9. Epidural Analgesia and Fever at Labor

    Ye. M. Shifman

    2008-01-01

    Full Text Available Objective: to study the incidence of labor fever under epidural analgesia (EA and to evaluate its impact on the courses of puerperium and early neonatality. Subjects and methods. The paper presents the data of a prospective study of the course of labor, puerperium, and early neonatality in 397 women in whom labors occurred at the Republican Peritoneal Center in 2006. A study group included 324 parturients in whom labor pain was relieved by EA. A comparison group comprised 55 parturients in whom no analgesics were used at labor. Results. There were no significant statistical differences between the groups in the incidence of labor fever and complicated puerperium and in that of neonatal pyoseptic diseases. Key words: labor hyperthermia, epidural analgesia, labor pain relief.

  10. The size of the labor wards

    Milland, Maria; Christoffersen, Jens; Hedegaard, Morten

    2013-01-01

    To assess possible associations between the size of labor units and the frequency of approved obstetric claims.......To assess possible associations between the size of labor units and the frequency of approved obstetric claims....

  11. Observations on International Labor Standards and Trade

    Alan B. Krueger

    1996-01-01

    This paper reviews the theoretical arguments for and against linking international labor standards to trade. Based on theory alone it is difficult to generalize about the effect of labor standards on efficiency and equity. Some economists have argued that international labor standards are merely disguised protectionism. An evaluation of determinants of support for legislation that would ban imports to the United States of goods made with child labor provides little support for the prevailing ...

  12. Solar Installation Labor Market Analysis

    Friedman, B.; Jordan, P.; Carrese, J.

    2011-12-01

    The potential economic benefits of the growing renewable energy sector have led to increased federal, state, and local investments in solar industries, including federal grants for expanded workforce training for U.S. solar installers. However, there remain gaps in the data required to understand the size and composition of the workforce needed to meet the demand for solar power. Through primary research on the U.S. solar installation employer base, this report seeks to address that gap, improving policymakers and other solar stakeholders understanding of both the evolving needs of these employers and the economic opportunity associated with solar market development. Included are labor market data covering current U.S. employment, expected industry growth, and employer skill preferences for solar installation-related occupations. This study offers an in-depth look at the solar installation sectors. A study published by the Solar Foundation in October 2011 provides a census of labor data across the entire solar value chain.

  13. Labor Unions and Asset Prices

    Busato, Francesco; Addessi, William

    The paper investigates the nexus between labor and financial markets, focusing on the interaction between labor union behavior in setting wages, firms' investment strategy and asset prices. The way unions set wage claims after observing firm's financial performance increases the volatility of firms......' returns and the riskiness of corporate ownership. To remunerate this higher volatility and stronger risk, firms' equities have to grant high return. This mechanism is able to offer an explanation of for the "equity puzzle", that is it can explain the difference between equity returns and the risk free...... rate. It is a welcome result that the simulated excess return is about the empirical estimate and this result is obtained with a logarithmic specification of the shareholders preferences....

  14. The comparison of automated urine analyzers with manual microscopic examination for urinalysis automated urine analyzers and manual urinalysis

    Fatma Demet Ä°nce

    2016-08-01

    Full Text Available Objectives: Urinalysis is one of the most commonly performed tests in the clinical laboratory. However, manual microscopic sediment examination is labor-intensive, time-consuming, and lacks standardization in high-volume laboratories. In this study, the concordance of analyses between manual microscopic examination and two different automatic urine sediment analyzers has been evaluated. Design and methods: 209 urine samples were analyzed by the Iris iQ200 ELITE (Ä°ris Diagnostics, USA, Dirui FUS-200 (DIRUI Industrial Co., China automatic urine sediment analyzers and by manual microscopic examination. The degree of concordance (Kappa coefficient and the rates within the same grading were evaluated. Results: For erythrocytes, leukocytes, epithelial cells, bacteria, crystals and yeasts, the degree of concordance between the two instruments was better than the degree of concordance between the manual microscopic method and the individual devices. There was no concordance between all methods for casts. Conclusion: The results from the automated analyzers for erythrocytes, leukocytes and epithelial cells were similar to the result of microscopic examination. However, in order to avoid any error or uncertainty, some images (particularly: dysmorphic cells, bacteria, yeasts, casts and crystals have to be analyzed by manual microscopic examination by trained staff. Therefore, the software programs which are used in automatic urine sediment analysers need further development to recognize urinary shaped elements more accurately. Automated systems are important in terms of time saving and standardization. Keywords: Urinalysis, Autoanalysis, Microscopy

  15. The comparison of automated urine analyzers with manual microscopic examination for urinalysis automated urine analyzers and manual urinalysis.

    İnce, Fatma Demet; Ellidağ, Hamit Yaşar; Koseoğlu, Mehmet; Şimşek, Neşe; Yalçın, Hülya; Zengin, Mustafa Osman

    2016-08-01

    Urinalysis is one of the most commonly performed tests in the clinical laboratory. However, manual microscopic sediment examination is labor-intensive, time-consuming, and lacks standardization in high-volume laboratories. In this study, the concordance of analyses between manual microscopic examination and two different automatic urine sediment analyzers has been evaluated. 209 urine samples were analyzed by the Iris iQ200 ELITE (İris Diagnostics, USA), Dirui FUS-200 (DIRUI Industrial Co., China) automatic urine sediment analyzers and by manual microscopic examination. The degree of concordance (Kappa coefficient) and the rates within the same grading were evaluated. For erythrocytes, leukocytes, epithelial cells, bacteria, crystals and yeasts, the degree of concordance between the two instruments was better than the degree of concordance between the manual microscopic method and the individual devices. There was no concordance between all methods for casts. The results from the automated analyzers for erythrocytes, leukocytes and epithelial cells were similar to the result of microscopic examination. However, in order to avoid any error or uncertainty, some images (particularly: dysmorphic cells, bacteria, yeasts, casts and crystals) have to be analyzed by manual microscopic examination by trained staff. Therefore, the software programs which are used in automatic urine sediment analysers need further development to recognize urinary shaped elements more accurately. Automated systems are important in terms of time saving and standardization.

  16. Indonesian Labor Reform Since 1998

    Uwiyono, Aloysius

    2008-01-01

    The development of labor law in the world essentially influenced by the newest models in industrial relations in each county. In general, there are two models, Corporatist Model/Regulatory Model and Contractual Model. The first model frequently meets in the countries whose use the civil law like France, Netherlands, Germany, and Indonesia, while the second model frequently meet in common law countries like the United States of America's, England, Australia, and Malaysia. Based on the two theo...

  17. 10 CFR 440.19 - Labor.

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Labor. 440.19 Section 440.19 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.19 Labor. Payments for labor... supplement wages paid to training participants, public service employment workers, or other Federal or State...

  18. 22 CFR 901.19 - Labor organization.

    2010-04-01

    ... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Labor organization. 901.19 Section 901.19 Foreign Relations FOREIGN SERVICE GRIEVANCE BOARD GENERAL Meanings of Terms As Used in This Chapter § 901.19 Labor organization. Labor organization means any employee organization accorded recognition as the...

  19. Department of Labor Semiannual Regulatory Agenda

    2010-12-20

    ... reduce or eliminate the amount of diacetyl in some kinds of flavorings, foods, and beverages. They have.... Hilda L. Solis, Secretary of Labor. Office of Labor-Management Standards--Proposed Rule Stage Regulation... in part II of this issue of the Federal Register. Office of Labor-Management Standards--Completed...

  20. John R. Commons: Pioneer in Labor Economics.

    Barbash, Jack

    1989-01-01

    John R. Commons has contributed in one way or another to pratically every piece of social and labor legislation that has been enacted in the twentieth century. He has made his mark on such diverse aspects of American labor as apprenticeship, vocational education, workers' compensation, and the administration of labor law. (Author/JOW)

  1. Conceptual problems of the intellectual labor economics

    S N Lebedev

    2014-12-01

    Full Text Available The article is based on the detailed analysis of the intellectual labor and takes into account theoretical and practical aspects of the intellectual labor economics in the transition to the information society. The author describes the nature, specific features, content, structure and the bases for classification of the intellectual labor.

  2. Tax policy and labor market performance

    A.L. Bovenberg (Lans)

    2003-01-01

    textabstractIn exploring the impact of tax policy on labor-market performance, the paper first investigates how tax reform impacts labor supply and equilibrium unemployment in representative agent models. The impact of tax policy on labor market performance depends importantly on various other

  3. Child Labor and School Attendance in Kenya

    Moyi, Peter

    2011-01-01

    Sub-Saharan Africa has the highest incidence of child labor in the world and estimates show that it continues to grow. This paper examines the causes and magnitude of child labor in Kenya. Unlike previous studies that examined child labor as only an economic activity, this paper includes household chores. Including household chores is important…

  4. Intersectoral labor mobility and deforestation in Ghana

    Owusu, V.; Yerfi Fosu, K.; Burger, C.P.J.

    2012-01-01

    This paper quantifies the effects of the determinants of intersectoral labor mobility and the effect of intersectoral labor mobility on deforestation in Ghana over the period 1970–2008. A cointegration and error correction modeling approach is employed. The empirical results show that labor mobility

  5. 23 CFR 140.906 - Labor costs.

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Labor costs. 140.906 Section 140.906 Highways FEDERAL... Railroad Work § 140.906 Labor costs. (a) General. (1) Salaries and wages, at actual or average rates, and... reimbursable when supported by adequate records. This shall include labor costs associated with preliminary...

  6. Early Smoking, Education, and Labor Market Performance

    Palali, Ali

    2015-01-01

    This study investigates the effects of early smoking on educational attainment and labor market performance. The results show that early smoking adversely affects educational attainment and initial labor market performance, but only for males. The effect of early smoking on initial labor market

  7. Age-specific labor market dynamics

    Gielen, A. C.

    2008-01-01

    One important finding concerns the fact that job separations for older workers constitute mostly a one-way exit out of the labor force, despite the fact that an ageing society calls for an active labor market participation from us all. Also, the allocation of labor for younger workers has shown to

  8. 24 CFR 92.354 - Labor.

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Labor. 92.354 Section 92.354... INVESTMENT PARTNERSHIPS PROGRAM Other Federal Requirements § 92.354 Labor. (a) General. (1) Every contract... prevailing in the locality, as predetermined by the Secretary of Labor pursuant to the Davis-Bacon Act (40 U...

  9. Identifying suitable substrates for high-quality graphene-based heterostructures

    Banszerus, L.; Janssen, H.; Otto, M.; Epping, A.; Taniguchi, T.; Watanabe, K.; Beschoten, B.; Neumaier, D.; Stampfer, C.

    2017-06-01

    We report on a scanning confocal Raman spectroscopy study investigating the strain-uniformity and the overall strain and doping of high-quality chemical vapour deposited (CVD) graphene-based heterostuctures on a large number of different substrate materials, including hexagonal boron nitride (hBN), transition metal dichalcogenides, silicon, different oxides and nitrides, as well as polymers. By applying a hBN-assisted, contamination free, dry transfer process for CVD graphene, high-quality heterostructures with low doping densities and low strain variations are assembled. The Raman spectra of these pristine heterostructures are sensitive to substrate-induced doping and strain variations and are thus used to probe the suitability of the substrate material for potential high-quality graphene devices. We find that the flatness of the substrate material is a key figure for gaining, or preserving high-quality graphene.

  10. Production of high quality sodium iodide preparations labelled with carrier free iodine-125

    Abdukayumov, M.N.; Chistyakov, P.G.; Shilin, E.A.

    2001-01-01

    Work is related to the problem of high-quality Sodium Iodide preparation production and to the choice of the peptids iodination methods with the purpose of control test developing to determine the Biological activity of the above mentioned preparation

  11. The Role of Dosimetry in High-Quality EMI Risk Assessment

    2006-01-01

    The Final Proceedings for The role of EMF dosimetry in high quality risk assessment 13 September 2006 - 15 September 2006 In the last three decades the use of devices that emit electromagnetic fields (EMF...

  12. INIS: Database manual

    2003-01-01

    This document is one in a series of publications known as the INIS Reference Series. It is intended for users of INIS (International Nuclear Information System) output data on various media (FTP file, CD-ROM, e-mail file, earlier magnetic tape, cartridge, etc.). This manual provides a description of each data element including information on contents, structure and usage as well as historical overview of additions, deletions and changes of data elements and their contents that have taken place over the years. Each record contains certain control data fields (001-009), one, two or three bibliographic levels, a set of descriptors, and zero, one or more abstracts, one in English and optionally one or more in another language. In order to facilitate the description of the system, the sequence of data elements is based on the input or, as it is internally called, worksheet format which differs from the exchange format described in the manual IAEA-INIS-7. A separate section is devoted to each data element and deviations from the exchange format are indicated whenever present. As the Record Leader and the Directory are sufficiently explained in Chapter 3.1 of IAEA-INIS-7, the contents of this manual are limited to control fields and data fields; the detailed explanations are intended to supplement the basic information given in Chapter 3.2 of IAEA-INIS-7. Bibliographic levels are used to identify component parts of a publication, i.e. chapters in a book, articles in a journal issue, conference papers in a proceedings volume. All bibliographic levels contained in a record are given in a control data field. Each bibliographic level identifier appears in the subdirectory with a pointer to its position in the record

  13. MAP user's manual copyright

    Pillsbury, R.D. Jr.

    1991-12-01

    The program MITMAP represents a set of general purpose, two- dimensional, finite element programs for the calculation of magnetic fields. It consists of the program MAP and MAP2DJ. The two programs are used to solve different electromagnetic problems, but they have a common set of subrountines for pre- and postprocessing. Originally separate programs, they have been combined to make modification easier. The manuals, however, will remain separate. The program MAP is described in this manual. MAP is applicable to the class of problems with two-dimensional-planar or axisymmetric - geometries, in which the current density and the magnetic vector potential have only a single nonvanishing component. The single component is associated with the direction that is perpendicular to the plane of the problem and is invariant with respect to that direction. Maxwell's equations can be reduced to a solver diffusion equation in terms of the single, nonvanishing component of the magnetic vector potential for planar problems and to a single component of a vector potential for planar problems and to a single component of a vector diffusion equation for axisymmetric problems. The magnetic permeability appears in the governing equation. The permeability may be a function of the magnetic flux density. In addition, any electrically conducting material present will have eddy currents induced by a time varying magnetic field. These eddy currents must be included in the solution process. This manual provides a description of the structure of the input data and output for the program. There are several example problems presented that illustrate the major program features. Appendices are included that contain a derivation of the governing equations and the application of the finite element method to the solution of the equations

  14. 77 FR 20054 - Bureau of International Labor Affairs; Labor Advisory Committee for Trade Negotiations and Trade...

    2012-04-03

    ... DEPARTMENT OF LABOR Office of the Secretary Bureau of International Labor Affairs; Labor Advisory Committee for Trade Negotiations and Trade Policy ACTION: Meeting Notice. SUMMARY: Pursuant to the... meeting of the Labor Advisory Committee for Trade Negotiation and Trade Policy. Date, Time, Place: May 14...

  15. 76 FR 31641 - Bureau of International Labor Affairs; Labor Advisory Committee for Trade Negotiations and Trade...

    2011-06-01

    ... DEPARTMENT OF LABOR Office of the Secretary Bureau of International Labor Affairs; Labor Advisory Committee for Trade Negotiations and Trade Policy ACTION: Meeting notice. SUMMARY: Pursuant to the... meeting of the Labor Advisory Committee for Trade Negotiation and Trade Policy. Date, Time, Place: June 28...

  16. 75 FR 78758 - Bureau of International Labor Affairs; Labor Advisory Committee for Trade Negotiations and Trade...

    2010-12-16

    ... DEPARTMENT OF LABOR Office of the Secretary Bureau of International Labor Affairs; Labor Advisory Committee for Trade Negotiations and Trade Policy ACTION: Meeting notice. SUMMARY: Pursuant to the... meeting of the Labor Advisory Committee for Trade Negotiation and Trade Policy. Date, Time, Place: January...

  17. Not by Labor Alone: Considerations for Value Influence Use of the Labor Rule in Ownership Transfers

    Kanngiesser, Patricia; Hood, Bruce

    2014-01-01

    People often assign ownership to the person who has invested labor into making an object (labor rule). However, labor usually improves objects and increases their value, and it has not been investigated whether these considerations underlie people's use of the labor rule. We presented participants with third-party ownership conflicts between…

  18. Universal and rapid salt-extraction of high quality genomic DNA for PCR-based techniques.

    Aljanabi, S M; Martinez, I

    1997-01-01

    A very simple, fast, universally applicable and reproducible method to extract high quality megabase genomic DNA from different organisms is described. We applied the same method to extract high quality complex genomic DNA from different tissues (wheat, barley, potato, beans, pear and almond leaves as well as fungi, insects and shrimps' fresh tissue) without any modification. The method does not require expensive and environmentally hazardous reagents and equipment. It can be performed even i...

  19. [Quality management is associated with high quality services in health care].

    Nielsen, Tenna Hassert; Riis, Allan; Mainz, Jan; Jensen, Anne-Louise Degn

    2013-12-09

    In these years, quality management has been the focus in order to meet high quality services for the patients in Danish health care. This article provides information on quality management and quality improvement and it evaluates its effectiveness in achieving better organizational structures, processes and results in Danish health-care organizations. Our findings generally support that quality management is associated with high quality services in health care.

  20. Modern TTL circuits manual

    Marston, R M

    2013-01-01

    Modern TTL Circuits Manual provides an introduction to the basic principles of Transistor-Transistor Logic (TTL). This book outlines the major features of the 74 series of integrated circuits (ICs) and introduces the various sub-groups of the TTL family.Organized into seven chapters, this book begins with an overview of the basics of digital ICs. This text then examines the symbology and mathematics of digital logic. Other chapters consider a variety of topics, including waveform generator circuitry, clocked flip-flop and counter circuits, special counter/dividers, registers, data latches, com

  1. Manual of Decolonization

    Gigone, Fabio

    2010-01-01

    During a residency in Bethlehem, Venice-based design and research studio Salottobuono formulated a 'strategy of subversion' for Israeli settlements in the West Bank. From this comes the elegant Manual of Decolonization; a generic but detailed resource for all post-occupation scenarios. Assessing...... how evacuated and imposed structures can be transformed in collaboration with local stakeholders, the book's plans, models and projections are divided into themes like 'De-parcelling', 'Re-combining' and 'Un-roofing'; landscape, nature and materials are considered at length. The outcome is an open...

  2. CMOS circuits manual

    Marston, R M

    1995-01-01

    CMOS Circuits Manual is a user's guide for CMOS. The book emphasizes the practical aspects of CMOS and provides circuits, tables, and graphs to further relate the fundamentals with the applications. The text first discusses the basic principles and characteristics of the CMOS devices. The succeeding chapters detail the types of CMOS IC, including simple inverter, gate and logic ICs and circuits, and complex counters and decoders. The last chapter presents a miscellaneous collection of two dozen useful CMOS circuits. The book will be useful to researchers and professionals who employ CMOS circu

  3. Coal marketing manual 1987

    1987-01-01

    This manual provides information on the international coal market in tabulated format. Statistics are presented for the Australian coal industry, exports, currency movements, world coal production, coal and coke imports and exports. Detailed information is provided on the Australian coal industry including mine specific summaries. Pricing summaries for thermal and coking coal in 1987, coal quality standards and specifications, trends in coal prices and stocks. Imports and exports for World coal and coke, details of shipping, international ports and iron and steel production. An exporters index of Australian and overseas companies with industry and government contacts is included. 15 figs., 67 tabs.

  4. Optoelectronics circuits manual

    Marston, R M

    2013-01-01

    Optoelectronics Circuits Manual covers the basic principles and characteristics of the best known types of optoelectronic devices, as well as the practical applications of many of these optoelectronic devices. The book describes LED display circuits and LED dot- and bar-graph circuits and discusses the applications of seven-segment displays, light-sensitive devices, optocouplers, and a variety of brightness control techniques. The text also tackles infrared light-beam alarms and multichannel remote control systems. The book provides practical user information and circuitry and illustrations.

  5. Timergenerator circuits manual

    Marston, R M

    2013-01-01

    Timer/Generator Circuits Manual is an 11-chapter text that deals mainly with waveform generator techniques and circuits. Each chapter starts with an explanation of the basic principles of its subject followed by a wide range of practical circuit designs. This work presents a total of over 300 practical circuits, diagrams, and tables.Chapter 1 outlines the basic principles and the different types of generator. Chapters 2 to 9 deal with a specific type of waveform generator, including sine, square, triangular, sawtooth, and special waveform generators pulse. These chapters also include pulse gen

  6. Health physics instrument manual

    Gupton, E.D.

    1978-08-01

    The purpose of this manual is to provide apprentice health physics surveyors and other operating groups not directly concerned with radiation detection instruments a working knowledge of the radiation detection and measuring instruments in use at the Laboratory. The characteristics and applications of the instruments are given. Portable instruments, stationary instruments, personnel monitoring instruments, sample counters, and miscellaneous instruments are described. Also, information sheets on calibration sources, procedures, and devices are included. Gamma sources, beta sources, alpha sources, neutron sources, special sources, a gamma calibration device for badge dosimeters, and a calibration device for ionization chambers are described

  7. IMAGE User Manual

    Stehfest, E; De Waal, L; Oostenrijk, R.

    2010-09-15

    This user manual contains the basic information for running the simulation model IMAGE ('Integrated Model to Assess the Global Environment') of PBL. The motivation for this report was a substantial restructuring of the source code for IMAGE version 2.5. The document gives concise content information about the submodels, tells the user how to install the program, describes the directory structure of the run environment, shows how scenarios have to be prepared and run, and gives insight in the restart functionality.

  8. Radioanalytical methods manual

    Chiu, N.W.; Dean, J.R.

    1986-01-01

    This Radioanalytical Methods manual is comprised of 12 chapters. It includes a review of the pertinent literature up to the end of 1982 pertaining to the measurement of the radioactive species listed under the terms of the contract. Included is methodology recommended for the decompositions of soils, tailings, ores, biological samples and air filters. Detailed analytical methodology for the measurement of gross alpha, gross beta, gross gamma, uranium, radium-226, radium-228, lead-210, thorium-232, thorium-230, thorium-228, total thorium, radon-222, radon-220 and radon-219 is presented

  9. ASSERT-4 user's manual

    Judd, R.A.; Tahir, A.; Carver, M.B.; Stewart, D.G.; Thibeault, P.R.; Rowe, D.S.

    1984-09-01

    ASSERT-4 is an advanced subchannel code being developed primarily to model single- and two-phase flow and heat transfer in horizontal rod bundles. This manual is intended to facilitate the application of this code to the analysis of flow in reactor fuel channels. It contains a brief description of the thermalhydraulic model and ASSERT-4 solution scheme, and other information required by users. This other information includes a detailed discussion of input data requirements, a sample problem and solution, and information describing how to access and run ASSERT-4 on the Chalk River computers

  10. Rural Gas Program manual

    1987-11-01

    The intent and purpose of this manual is to describe the various guideliness and administrative procedures associated with the Alberta Rural Gas Program and to consolidate and expand upon the legislation under which the Program has been developed. It is intended primarily for the use and information of rural gas distributors, their agents, and other private or government parties having an interest in the Rural Gas Program. Information is presented on: rural gas franchises, technical applications, contracts and tenders, determination of system capital costs for grant support, grants, Gas Alberta brokerage arrangements, insurance coverage, utility rights-of-way, and lien notes.

  11. Health and safety manual

    1980-02-01

    The manual consists of the following chapters: general policies and administration; the Environmental Health and Safety Department; the Medical Services Department: biological hazards; chemical safety; confined space entry; cryogenic safety; electrical safety; emergency plans; engineering and construction; evacuations, trenching, and shoring; fire safety; gases, flammable and compressed; guarding, mechanical; ladders and scaffolds, work surfaces; laser safety; materials handling and storage; noise; personal protective equipment; pressure safety; radiation safety, ionizing and non-ionizing; sanitation; seismic safety; training, environmental health and safety; tools, power and hand-operated; traffic and transportation; and warning signs and devices

  12. Astronaut training manual

    Coleman, E. A.

    1980-01-01

    Scientific information from previous space flights, space medicine, exercise physiology, and sports medicine was used to prepare a physical fitness manual suitable for use by members of the NASA astronaut population. A variety of scientifically valid exercise programs and activities suitable for the development of physical fitness are provided. Programs, activities, and supportive scientific data are presented in a concise, easy to read format so as to permit the user to select his or her mode of training with confidence and devote time previously spent experimenting with training routines to preparation for space flight. The programs and activities included were tested and shown to be effective and enjoyable.

  13. RADTRAN 6 Technical Manual

    Weiner, Ruth F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neuhauser, Karen Sieglinde [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Heames, Terence John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); O' Donnell, Brandon M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dennis, Matthew L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  14. RADTRAN 6 technical manual.

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O' Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  15. FISPACT 97: user manual

    Forrest, R.A.; Sublet, J.-Ch.

    1997-05-01

    FISPACT is the inventory code included in the European Activation System (EASY). A new version of FISPACT: FISPACT-97 has been developed and this report is the User manual for the code. It explains the use of all the code words used in the input file to specify a FISPACT run and describes how all the data files are connected. A series of appendices cover the working of the code and the physical and mathematical details. Background information on the data files and extensive examples of input files suitable for various applications are included. (Author)

  16. Timber designers' manual

    Ozelton, E C

    2008-01-01

    This major reference manual covers both overall and detail design of structural timber, including aspects such as shear deflection, creep, dynamic and lateral stability considerations for flexural members.Available for the first time in paperback, the Third Edition was substantially revised to take account of the many changes since the previous edition was published in 1984. It is based on British Standard BS 5268-2: 2002, which brought design concepts closer to European practice and Eurocode 5.Features of the Third Edition include:* information on bolt values including

  17. NASCAP programmer's reference manual

    Mandell, M. J.; Stannard, P. R.; Katz, I.

    1993-05-01

    The NASA Charging Analyzer Program (NASCAP) is a computer program designed to model the electrostatic charging of complicated three-dimensional objects, both in a test tank and at geosynchronous altitudes. This document is a programmer's reference manual and user's guide. It is designed as a reference to experienced users of the code, as well as an introduction to its use for beginners. All of the many capabilities of NASCAP are covered in detail, together with examples of their use. These include the definition of objects, plasma environments, potential calculations, particle emission and detection simulations, and charging analysis.

  18. Percept User Manual.

    Carnes, Brian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kennon, Stephen Ray [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-05-01

    This document is the main user guide for the Sierra/Percept capabilities including the mesh_adapt and mesh_transfer tools. Basic capabilities for uniform mesh refinement (UMR) and mesh transfers are discussed. Examples are used to provide illustration. Future versions of this manual will include more advanced features such as geometry and mesh smoothing. Additionally, all the options for the mesh_adapt code will be described in detail. Capabilities for local adaptivity in the context of offline adaptivity will also be included. This page intentionally left blank.

  19. Optoelectronics circuits manual

    Marston, R M

    1999-01-01

    This manual is a useful single-volume guide specifically aimed at the practical design engineer, technician, and experimenter, as well as the electronics student and amateur. It deals with the subject in an easy to read, down to earth, and non-mathematical yet comprehensive manner, explaining the basic principles and characteristics of the best known devices, and presenting the reader with many practical applications and over 200 circuits. Most of the ICs and other devices used are inexpensive and readily available types, with universally recognised type numbers.The second edition

  20. Validity and efficacy of the labor contract

    Jorge Toyama

    2012-12-01

    Full Text Available The validity and efficacy of the labor contract as well as cases of nullity and defeasibility import an analysis of scopes of the supplementary application of Civil Code taking into account the peculiarities of Labor Law. Labor contract, while legal business has as regulatory framework to the regulations of Civil Code but it is necessary to determine, in each case, whether to apply fully this normative body, or modulate its supplemental application, or simply conclude that it doesn’t result compatible its regulation due to the special nature of labor relations. Specifically, this issue will be analyzed from cases of nullity and defeasibility of the labor contract.

  1. Gender analysis of the Russian labor market

    Aleksandr Mikhailovich Panov

    2014-01-01

    The issue of gender inequality in the labor market affects all world countries to some extent. As salary is the basis of population’s sources of income in Russia, unequal pay to men and women for equal work can trigger gender discrimination in the labor market and beyond. The article focusses on the gender analysis of the Russian labor market. It focuses on conjunctural conditions of the labor market in a gender aspect, socio-economic characteristics of men and women as subjects of the labor ...

  2. Modern Neuraxial Anesthesia for Labor and Delivery.

    Meng, Marie-Louise; Smiley, Richard

    2017-01-01

    The availability of safe, effective analgesia during labor has become an expectation for women in most of the developed world over the past two or three decades. More than 60% of women in the United States now receive some kind of neuraxial procedure during labor. This article is a brief review of the advantages and techniques of neuraxial labor analgesia along with the recent advances and controversies in the field of labor analgesia. For the most part, we have aimed the discussion at the non-anesthesiologist to give other practitioners a sense of the state of the art and science of labor analgesia in the second decade of the 21st century.

  3. The use of EORTC measures in daily clinical practice—A synopsis of a newly developed manual

    Wintner, Lisa M; Sztankay, Monika; Aaronson, Neil

    2016-01-01

    possible and to encourage readers and end-users of EORTC measures to contribute to further needed high-quality research. The manual will be accessible on the EORTC Quality of Life Group website's homepage and will be periodically updated to take into account any new knowledge due to medical, technical...

  4. Radiological control manual. Revision 1

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

  5. Radiological control manual. Revision 1

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP

  6. BBC users manual

    Ltterst, R.F.; Sutcliffe, W.G.; Warshaw, S.I.

    1977-11-01

    BBC is a two-dimensional, multifluid Eulerian hydro-radiation code based on KRAKEN and some subsequent ideas. It was developed in the explosion group in T-Division as a basic two-dimensional code to which various types of physics can be added. For this reason BBC is a FORTRAN (LRLTRAN) code. In order to gain the 2-to-1 to 4-to-1 speed advantage of the STACKLIB software on the 7600's and to be able to execute at high speed on the STAR, the vector extensions of LRLTRAN (STARTRAN) are used throughout the code. Either cylindrical- or slab-type problems can be run on BBC. The grid is bounded by a rectangular band of boundary zones. The interfaces between the regular and boundary zones can be selected to be either rigid or nonrigid. The setup for BBC problems is described in the KEG Manual and LEG Manual. The difference equations are described in BBC Hydrodynamics. Basic input and output for BBC are described

  7. SYVAC3 manual

    Andres, T.H.

    2000-01-01

    SYVAC3 (Systems Variability Analysis Code, generation 3) is a computer program that implements a method called systems variability analysis to analyze the behaviour of a system in the presence of uncertainty. This method is based on simulating the system many times to determine the variation in behaviour it can exhibit. SYVAC3 specializes in systems representing the transport of contaminants, and has several features to simplify the modelling of such systems. It provides a general tool for estimating environmental impacts from the dispersal of contaminants. This report describes the use and structure of SYVAC3. It is intended for modellers, programmers, operators and reviewers who deal with simulation codes based on SYVAC3. From this manual they can learn how to link a model with SYVAC3, how to set up an input file, and how to extract results from output files. The manual lists the subroutines of SYVAC3 that are available for use by models, and describes their argument lists. It also gives an overview of how routines in the File Reading Package, the Parameter Sampling Package and the Time Series Package can be used by programs outside of SYVAC3. (author)

  8. Energy statistics manual

    NONE

    2004-07-01

    The Manual is written in a question-and-answer format. The points developed are introduced with a basic question, such as: What do people mean by 'fuels' and 'energy'? What units are used to express oil? How are energy data presented? Answers are given in simple terms and illustrated by graphs, charts and tables. More technical explanations are found in the annexes. The Manual contains seven chapters. The first one presents the fundamentals of energy statistics, five chapters deal with the five different fuels (electricity and heat; natural gas; oil; solid fuels and manufactured gases; renewables and waste) and the last chapter explains the energy balance. Three technical annexes and a glossary are also included. For the five chapters dedicated to the fuels, there are three levels of reading: the first one contains general information on the subject, the second one reviews issues which are specific to the joint IEA/OECD-Eurostat-UNECE questionnaires and the third one focuses on the essential elements of the subject. 43 figs., 22 tabs., 3 annexes.

  9. MELCOR computer code manuals

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A.; Hyman, C.R.; Sanders, R.L. [Oak Ridge National Lab., TN (United States)

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR`s phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package.

  10. CTF Theory Manual

    Avramova, Maria N. [Pennsylvania State Univ., University Park, PA (United States); Salko, Robert K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-05-25

    Coolant-Boiling in Rod Arrays|Two Fluids (COBRA-TF) is a thermal/ hydraulic (T/H) simulation code designed for light water reactor (LWR) vessel analysis. It uses a two-fluid, three-field (i.e. fluid film, fluid drops, and vapor) modeling approach. Both sub-channel and 3D Cartesian forms of 9 conservation equations are available for LWR modeling. The code was originally developed by Pacific Northwest Laboratory in 1980 and had been used and modified by several institutions over the last few decades. COBRA-TF also found use at the Pennsylvania State University (PSU) by the Reactor Dynamics and Fuel Management Group (RDFMG) and has been improved, updated, and subsequently re-branded as CTF. As part of the improvement process, it was necessary to generate sufficient documentation for the open-source code which had lacked such material upon being adopted by RDFMG. This document serves mainly as a theory manual for CTF, detailing the many two-phase heat transfer, drag, and important accident scenario models contained in the code as well as the numerical solution process utilized. Coding of the models is also discussed, all with consideration for updates that have been made when transitioning from COBRA-TF to CTF. Further documentation outside of this manual is also available at RDFMG which focus on code input deck generation and source code global variable and module listings.

  11. LCS Users Manual

    Redd, A.J.; Ignat, D.W.

    1998-01-01

    The Lower Hybrid Simulation Code (LSC) is a computational model of lower hybrid current drive in the presence of an electric field. Details of geometry, plasma profiles, and circuit equations are treated. Two-dimensional velocity space effects are approximated in a one-dimensional Fokker-Planck treatment. The LSC was originally written to be a module for lower hybrid current drive called by the Tokamak Simulation Code (TSC), which is a numerical model of an axisymmetric tokamak plasma and the associated control systems. The TSC simulates the time evolution of a free boundary plasma by solving the MHD equations on a rectangular computational grid. The MHD equations are coupled to the external circuits (representing poloidal field coils) through the boundary conditions. The code includes provisions for modeling the control system, external heating, and fusion heating. The LSC module can also be called by the TRANSP code. TRANSP represents the plasma with an axisymmetric, fixed-boundary model and focuses on calculation of plasma transport to determine transport coefficients from data on power inputs and parameters reached. This manual covers the basic material needed to use the LSC. If run in conjunction with TSC, the ''TSC Users Manual'' should be consulted. If run in conjunction with TRANSP, on-line documentation will be helpful. A theoretical background of the governing equations and numerical methods is given. Information on obtaining, compiling, and running the code is also provided

  12. MELCOR computer code manuals

    Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L.; Hodge, S.A.; Hyman, C.R.; Sanders, R.L.

    1995-03-01

    MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR's phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package

  13. ARDS User Manual

    Fleming, David P.

    2001-01-01

    Personal computers (PCs) are now used extensively for engineering analysis. their capability exceeds that of mainframe computers of only a few years ago. Programs originally written for mainframes have been ported to PCs to make their use easier. One of these programs is ARDS (Analysis of Rotor Dynamic Systems) which was developed at Arizona State University (ASU) by Nelson et al. to quickly and accurately analyze rotor steady state and transient response using the method of component mode synthesis. The original ARDS program was ported to the PC in 1995. Several extensions were made at ASU to increase the capability of mainframe ARDS. These extensions have also been incorporated into the PC version of ARDS. Each mainframe extension had its own user manual generally covering only that extension. Thus to exploit the full capability of ARDS required a large set of user manuals. Moreover, necessary changes and enhancements for PC ARDS were undocumented. The present document is intended to remedy those problems by combining all pertinent information needed for the use of PC ARDS into one volume.

  14. Electronic Commerce user manual

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD`s Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases & Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  15. Electronic Commerce user manual

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD's Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  16. SYVAC3 manual

    Andres, T.H

    2000-07-01

    SYVAC3 (Systems Variability Analysis Code, generation 3) is a computer program that implements a method called systems variability analysis to analyze the behaviour of a system in the presence of uncertainty. This method is based on simulating the system many times to determine the variation in behaviour it can exhibit. SYVAC3 specializes in systems representing the transport of contaminants, and has several features to simplify the modelling of such systems. It provides a general tool for estimating environmental impacts from the dispersal of contaminants. This report describes the use and structure of SYVAC3. It is intended for modellers, programmers, operators and reviewers who deal with simulation codes based on SYVAC3. From this manual they can learn how to link a model with SYVAC3, how to set up an input file, and how to extract results from output files. The manual lists the subroutines of SYVAC3 that are available for use by models, and describes their argument lists. It also gives an overview of how routines in the File Reading Package, the Parameter Sampling Package and the Time Series Package can be used by programs outside of SYVAC3. (author)

  17. The efficacy of hypnosis as an intervention for labor and delivery pain: a comprehensive methodological review.

    Landolt, Alison S; Milling, Leonard S

    2011-08-01

    This paper presents a comprehensive methodological review of research on the efficacy of hypnosis for reducing labor and delivery pain. To be included, studies were required to use a between-subjects or mixed model design in which hypnosis was compared with a control condition or alternative intervention in reducing labor pain. An exhaustive search of the PsycINFO and PubMed databases produced 13 studies satisfying these criteria. Hetero-hypnosis and self-hypnosis were consistently shown to be more effective than standard medical care, supportive counseling, and childbirth education classes in reducing pain. Other benefits included better infant Apgar scores and shorter Stage 1 labor. Common methodological limitations of the literature include a failure to use random assignment, to specify the demographic characteristics of samples, and to use a treatment manual. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. Indeterminacy and labor augmenting externalities

    Poulsen, Odile; Goenka, Aditya

    2002-01-01

    In this two-sector discrete time model of endogenous economic growth intersectoral effects are assumed to be "labor augmenting" We derive necessary and sufficient conditions for local indeterminacy and multiplicity of the balanced growth path in terms of factor intensities in both sectors....... The balanced growth path is unique if the consumption good sector is more capital intensive. However, it can be indeterminate. When the investment good sector is more capital intensive a sufficient condition for indeterminacy is that there exists at least three balanced growth paths....

  19. Timing of induction of labor.

    Bacak, Stephen J; Olson-Chen, Courtney; Pressman, Eva

    2015-10-01

    Determining the optimal timing for induction of labor is critical in minimizing the risks to maternal and fetal health. While data are available to guide us in some clinical situations, such as hypertension and diabetes, many gaps in knowledge still exist in others, including cholestasis of pregnancy, fetal anomalies, and placental abruption. This review of the currently available literature assesses the risks and benefits of preterm and early term induction in a wide variety of maternal and fetal conditions. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Labor report 1997-1998

    Instituto Nacional de Investigaciones Nucleares

    1998-01-01

    In agreement with the disposition in the 93 rd Article of the Mexican United States Constitution Policy, the National Institute for Nuclear Research, which is directed as decentralized public organization of the Federal Government presents its labor report corresponding to the period 1997-1998. The Institution purpose is to perform research and development in the nuclear sciences and technology fields, as well as to promote the peaceful uses of the nuclear energy and divulging the advances reached for entailing them to the economic, social, scientific and technological development of the country. (Author)

  1. Ciencias 2. Manual do Professor (Science Teacher's Manual).

    Raposo, Lucilia

    This is the teacher's manual for Ciencias 2, the second in a series of elementary science textbooks for Portuguese-speaking students. The student textbook contains 10 chapters and 57 activities. The teacher's manual presents an explanation of the educational goals and the organization of the content, Topics included are environment, the human,…

  2. 29 CFR 552.108 - Child labor provisions.

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Child labor provisions. 552.108 Section 552.108 Labor... OF THE FAIR LABOR STANDARDS ACT TO DOMESTIC SERVICE Interpretations § 552.108 Child labor provisions. Congress made no change in section 12 as regards domestic service employees. Accordingly, the child labor...

  3. 29 CFR 42.9 - Farm Labor Specialist (ESA).

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Farm Labor Specialist (ESA). 42.9 Section 42.9 Labor Office of the Secretary of Labor COORDINATED ENFORCEMENT § 42.9 Farm Labor Specialist (ESA). (a) The Assistant Secretary for ESA shall designate ESA Compliance Officers as Farm Labor Specialists (Specialists...

  4. GANDALF: users' manual

    Strout, R.E. II; Beach, J.L.

    1977-01-01

    The GANDALF computer code was written to calculate neutron dose equivalent given the pulse-height data obtained by using a Linear Energy Transfer (LET) proportional counter. The code also uses pre- and/or post-calibration spectra, from an alpha source, to determine a calibration factor in keV/μ/channel. Output from the code consists of the effective radius of the detection chamber in microns, a calibration factor in keV/μ/channel, and the total dose and dose equivalent in rad or rem between any two LET energies by using the equations by Attix and Roesch [Radiation Dosimetry, 1, 71 (1968)]. This report is a user's manual and is not intended as anything else, and assumes that the user has a basic knowledge of the LLL Octopus timesharing system. However, a very brief description of how the code operates is included

  5. Coal marketing manual 1986

    1986-01-01

    This manual presents information for the use of marketers, consumers, analysts and investors. The information is presented in a series of tables and figures. Statistics are given for: Australian export tonnages and average export values for 1978-1985; international pig iron production 1976 to 1985; and international crude steel production 1979 to 1985. Trends in Australian export tonnages and prices of coal are reviewed. Details of international loading and discharge ports are given, together with a historical summary of shipping freight-rates since 1982. Long term contract prices for thermal and coking coal to Japan are tabulated. A review of coal and standards is given, together with Australian standards for coal and coke. A section on coal quality is included containing information on consumer coal quality preferences and Australian and Overseas coal brands and qualities. Finally an index is given of contact details of Australian and Overseas exporting companies, government departments, and the Australian Coal Association.

  6. FRMAC Operations Manual

    Frandsen, K.

    2010-05-01

    In the event of a major radiological incident, the Federal Radiological Monitoring and Assessment Center (FRMAC) will coordinate the federal agencies that have various statutory responsibilities. The FRMAC is responsible for coordinating all environmental radiological monitoring, sampling, and assessment activities for the response. This manual describes the FRMAC’s response activities in a radiological incident. It also outlines how FRMAC fits in the National Incident Management System (NIMS) under the National Response Framework (NRF) and describes the federal assets and subsequent operational activities which provide federal radiological monitoring and assessment of the affected areas. In the event of a potential or existing major radiological incident, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is responsible for establishing and managing the FRMAC during the initial phases.

  7. New Oxford style manual

    2012-01-01

    The New Oxford Style Manual brings together two essential reference works in a single volume: New Hart's Rules and the New Oxford Dictionary for Writers and Editors. New Hart's Rules, Oxford's definitive guide to style, consists of 20 chapters that provide authoritative and expert advice on how to prepare copy for publication. Topics covered include how to use italic, roman, and other type treatments, numbers and dates, law and legal references, illustrations, notes and references, and bibliographies. The guidelines are complemented by the New Oxford Dictionary for Writers and Editors, which features 25,000 alphabetically arranged entries giving authoritative advice on those words and names which raise questions time and time again because of spelling, capitalization, hyphenation, or cultural and historical context. Entries give full coverage of recommended spellings, variant forms, confusable words, hyphenation, capitalization, foreign and specialist terms, proper names, and abbreviations. The dictionary a...

  8. CALENDF-2010: user manual

    Sublet, Jean-Christophe; Ribon, Pierre; Coste-Delclaux, Mireille

    2011-09-01

    CALENDF-2010 represents a Fortran-95 update of the 1994, 2001 then 2005 code distribution with emphasise on programming quality and standards, physics and usage improvements. Devised to process multigroup cross-sections it relies on Gauss quadrature mathematical principle and strength. The followings processes can be handled by the code: moment probability table and effective cross-section calculation; pointwise cross section, probability table and effective cross-section regrouping; probability table condensation; probability table mix for several isotopes; probability table interpolation; effective cross section based probability table calculations; probability table calculations from effective cross-sections; cross-section comparison, complete energy pointwise cross-section processing and thickness dependent averaged transmission sample calculation. The CALENDF user manual, after having listed all principal code functions, describes sequentially each of them and gives comments on their associated output streams. Installation procedures, test cases and running time platform comparisons are given in the appendix. (authors)

  9. Google The Missing Manual

    Milstein, Sarah; Dornfest, Rael; MacDonald, Matthew

    2008-01-01

    Google.com is one of the most popular sites on the Internet and is used around the world by millions of people every day. Sure, you know how to "Google it" when you're searching for something--anything!--on the Web. It's plenty fast and easy to use. But did you know how much more you could achieve with the world's best search engine by clicking beyond the "Google Search" button? While you can interface with Google in 97 languages and glean results in 35, you can't find any kind of instruction manual from Google. Lucky for you, our fully updated and greatly expanded second edition to the best

  10. WISDAAM software programmer's manual

    Ball, J.R.

    1992-10-01

    The WISDAAM system was developed to provide quality control over test data associated with in situ testing at the Waste Isolation Pilot Plant (WIPP). Assurance of data quality is of critical importance as these tests supply the information which will be used for development and verification of the technology required for repository implementation. The amount of data collected from the tests, which are some of the largest ever fielded in an underground facility, prompted the undertaking of a major project task to address data processing. The goal was to create a conceptual umbrella under which all of the activities associated with processing WIPP data (i.e., data reduction, archiving, retrieval, etc.) could be grouped. The WISDAAM system was the product of this task. The overall system covers electronic as well as manual data processing; however, this document deals primarily with those operations implemented by software running on a VAX computer

  11. Pressure vessel design manual

    Moss, Dennis R

    2013-01-01

    Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. * Covers almost all problems that a working pressure vessel designer can expect to face, with ...

  12. STAIRS User's Manual

    Gadjokov, V; Dragulev, V; Gove, N; Schmid, H

    1976-10-15

    The STorage And Information Retrieval System (STAIRS) of IBM is described from the user's point of view. The description is based on the experimental use of STAIRS at the IAEA computer, with INIS and AGRIS data bases, from June 1975 to May 1976. Special attention is paid to what may be termed the hierarchical approach to retrieval in STAIRS. Such an approach allows for better use of the intrinsic data-base structure and, hence, contributes to higher recall and/or relevance ratios in retrieval. The functions carried out by STAIRS are explained and the communication language between the user and the system outlined. Details are given of the specific structure of the INIS and AGRIS data bases for STAIRS. The manual should enable an inexperienced user to start his first on-line dialogues by means of a CRT or teletype terminal. (author)

  13. Wikipedia the missing manual

    Broughton, John

    2008-01-01

    Want to be part of the largest group-writing project in human history? Learn how to contribute to Wikipedia, the user-generated online reference for the 21st century. Considered more popular than eBay, Microsoft.com, and Amazon.com, Wikipedia servers respond to approximately 30,000 requests per second, or about 2.5 billion per day. It's become the first point of reference for people the world over who need a fact fast.If you want to jump on board and add to the content, Wikipedia: The Missing Manual is your first-class ticket. Wikipedia has more than 9 million entries in 250 languages, over 2

  14. STAIRS User's Manual

    Gadjokov, V.; Dragulev, V.; Gove, N.; Schmid, H.

    1976-10-01

    The STorage And Information Retrieval System (STAIRS) of IBM is described from the user's point of view. The description is based on the experimental use of STAIRS at the IAEA computer, with INIS and AGRIS data bases, from June 1975 to May 1976. Special attention is paid to what may be termed the hierarchical approach to retrieval in STAIRS. Such an approach allows for better use of the intrinsic data-base structure and, hence, contributes to higher recall and/or relevance ratios in retrieval. The functions carried out by STAIRS are explained and the communication language between the user and the system outlined. Details are given of the specific structure of the INIS and AGRIS data bases for STAIRS. The manual should enable an inexperienced user to start his first on-line dialogues by means of a CRT or teletype terminal. (author)

  15. GRSAC Users Manual

    Ball, S.J.; Nypaver, D.J.

    1999-01-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model

  16. GRSAC Users Manual

    Ball, S.J.; Nypaver, D.J.

    1999-02-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model.

  17. Immune cells in term and preterm labor

    Gomez-Lopez, Nardhy; StLouis, Derek; Lehr, Marcus A; Sanchez-Rodriguez, Elly N; Arenas-Hernandez, Marcia

    2014-01-01

    Labor resembles an inflammatory response that includes secretion of cytokines/chemokines by resident and infiltrating immune cells into reproductive tissues and the maternal/fetal interface. Untimely activation of these inflammatory pathways leads to preterm labor, which can result in preterm birth. Preterm birth is a major determinant of neonatal mortality and morbidity; therefore, the elucidation of the process of labor at a cellular and molecular level is essential for understanding the pathophysiology of preterm labor. Here, we summarize the role of innate and adaptive immune cells in the physiological or pathological activation of labor. We review published literature regarding the role of innate and adaptive immune cells in the cervix, myometrium, fetal membranes, decidua and the fetus in late pregnancy and labor at term and preterm. Accumulating evidence suggests that innate immune cells (neutrophils, macrophages and mast cells) mediate the process of labor by releasing pro-inflammatory factors such as cytokines, chemokines and matrix metalloproteinases. Adaptive immune cells (T-cell subsets and B cells) participate in the maintenance of fetomaternal tolerance during pregnancy, and an alteration in their function or abundance may lead to labor at term or preterm. Also, immune cells that bridge the innate and adaptive immune systems (natural killer T (NKT) cells and dendritic cells (DCs)) seem to participate in the pathophysiology of preterm labor. In conclusion, a balance between innate and adaptive immune cells is required in order to sustain pregnancy; an alteration of this balance will lead to labor at term or preterm. PMID:24954221

  18. A global perspective on foreign contract labor.

    Smart, J E; Casco, R R

    1988-01-01

    This paper provides a general overview on foreign contract labor. The growth in the use of foreign contract labor is described with reference to other types of international labor movements such as 1) illegal, undocumented, or irregular migration; 2) free migration; and 3) permanent settlement migration. Within this general context, the various national advantages and disadvantages of contract labor are outlined. Particular issues like the role of trade unions and the likely future international labor circulation are noted. The 1984 World Labour Report estimates a global stock of almost 22 million foreign workers. Despite lack of reliable data, the size of irregular labor flows is considerable. More than 4 million undocumented workers, primarily Mexicans, can be found in the US alone. Other major flows of illegal labor go from China to Hong Kong, Malaysia to Singapore, Columbia to Venezuela, and poor Arab countries to oil-exporting countries in the Middle East. Laws are often poorly enforced and contradictory. Employers often actively recruit illegal migrants. While permanent migration was formerly the primary source of foreign workers, the numbers migrating in this manner are decreasing significantly. In absolute terms, host countries gain considerably more through the use of contract labor than sending countries. The pervasive commitment of national governments to economic growth is a prime consideration in the decision to import foreign labor. In general, trade unions have created an environment wherein the use of foreign labor in the formal as opposed to the informal labor market is more difficult. The disadvantages of labor export include the costs of family separation, worker exploitation, and cultural alienation. Remittances constitute the most tangible return of labor export. In many countries they have made a very considerable impact on the balance of payments deficit.

  19. Nuclear medicine resources manual

    2006-02-01

    Over the past decade many IAEA programmes have significantly enhanced the capabilities of numerous Member States in the field of nuclear medicine. Functional imaging using nuclear medicine procedures has become an indispensable tool for the diagnosis, treatment planning and management of patients. However, due to the heterogeneous growth and development of nuclear medicine in the IAEA's Member States, the operating standards of practice vary considerably from country to country and region to region. This publication is the result of the work of over 30 international professionals who have assisted the IAEA in the process of standardization and harmonization. This manual sets out the prerequisites for the establishment of a nuclear medicine service, including basic infrastructure, suitable premises, reliable supply of electricity, maintenance of a steady temperature, dust exclusion for gamma cameras and radiopharmacy dispensaries. It offers clear guidance on human resources and training needs for medical doctors, technologists, radiopharmaceutical scientists, physicists and specialist nurses in the practice of nuclear medicine. The manual describes the requirements for safe preparation and quality control of radiopharmaceuticals. In addition, it contains essential requirements for maintenance of facilities and instruments, for radiation hygiene and for optimization of nuclear medicine operational performance with the use of working clinical protocols. The result is a comprehensive guide at an international level that contains practical suggestions based on the experience of professionals around the globe. This publication will be of interest to nuclear medicine physicians, radiologists, medical educationalists, diagnostic centre managers, medical physicists, medical technologists, radiopharmacists, specialist nurses, clinical scientists and those engaged in quality assurance and control systems in public health in both developed and developing countries

  20. Manual of radioisotope production

    1966-01-01

    The Manual of Radioisotope Production has been compiled primarily to help small reactor establishments which need a modest programme of radioisotope production for local requirements. It is not comprehensive, but gives guidance on essential preliminary considerations and problems that may be met in the early stages of production. References are included as an aid to the reader who wishes to seek further in the extensive literature on the subject. In preparing the Manual, which is in two parts, the Agency consulted several Member States which already have long experience in radioisotope production. An attempt has been made to condense this experience, firstly, by setting out the technical and economic considerations which govern the planning and execution of an isotope programme and, secondly, by providing experimental details of isotope production processes. Part I covers topics common to all radioisotope processing, namely, laboratory design, handling and dispensing of radioactive solutions, quality control, measurement and radiological safety. Part II contains information on the fifteen radioisotopes in most common use. These are bromine-82, cobalt-58, chromium-51, copper-64, fluorine-18, gold-198, iodine-131, iron-59, magnesium-28, potassium-42, sodium-24, phosphorus-32, sulphur-35, yttrium-90 and zinc-65. Their nuclear properties are described, references to typical applications are given and published methods of production are reviewed; also included are descriptions in detail of the production processes used at several national atomic energy organizations. No attempt has been made to distinguish the best values for nuclear data or to comment on the relative merits of production processes. Each process is presented essentially as it was described by the contributor on the understanding that critical comparisons are not necessary for processes which have been well tried in practical production for many years. The information is presented as a guide to enable

  1. Korean Emotional Laborers' Job Stressors and Relievers: Focus on Work Conditions and Emotional Labor Properties.

    Lee, Garam

    2015-12-01

    The present study aims to investigate job stressors and stress relievers for Korean emotional laborers, specifically focusing on the effects of work conditions and emotional labor properties. Emotional laborers are asked to hide or distort their real emotions in their interaction with clients. They are exposed to high levels of stress in the emotional labor process, which leads to serious mental health risks including burnout, depression, and even suicide impulse. Exploring job stressors and relieving factors would be the first step in seeking alternatives to protect emotional laborers from those mental health risks. Using the third wave data of Korean Working Conditions Survey, logistic regression analysis was conducted for two purposes: to examine the relations of emotional labor and stress, and to find out job stressors and relievers for emotional laborers. The chances of stress arousal are 3.5 times higher for emotional laborers; emotional laborers experience double risk-burden for stress arousal. In addition to general job stressors, emotional laborers need to bear burdens related to emotional labor properties. The effect of social support at the workplace is not significant for stress relief, unlike common assumptions, whereas subjective satisfaction (wage satisfaction and work-life balance) is proven to have relieving effects on emotional laborers' job stress. From the results, the importance of a balanced understanding of emotional labor for establishing effective policies for emotional laborer protection is stressed.

  2. Labor potential: enhancing its development

    O.P. Melnichuk

    2016-06-01

    Full Text Available This publication presents the views of the author about the need to expand research of labor potential, estimation of quantitative indicators and qualitative characteristics at the individual, regional levels and the state as a whole to develop the mechanisms of its development. The existing methods of labour potential assessment are mainly based on the probable approach taking into account external and internal factors. In the case of assessment of labour potential of a single enterprise for the most suitable for this production method the mechanisms of its development can be worked out. However, for the state under a certain depreciation of the resource, property, financial and other potentials, aggressive manifestations of the crisis phenomena, processes etc. to resolve urgent is the problem of enhancing the development of qualitative characteristics of labor potential at all its levels. In this context it is important to exploit the potential of domestic education and science which now continue to be reformed for the sake of achieving European standards, using the advanced experience of other countries. Every means of legal, financial, managerial, and organizational impact should be used for this.

  3. Automated 3D ultrasound measurement of the angle of progression in labor.

    Montaguti, Elisa; Rizzo, Nicola; Pilu, Gianluigi; Youssef, Aly

    2018-01-01

    To assess the feasibility and reliability of an automated technique for the assessment of the angle of progression (AoP) in labor by using three-dimensional (3D) ultrasound. AoP was assessed by using 3D transperineal ultrasound by two operators in 52 women in active labor to evaluate intra- and interobserver reproducibility. Furthermore, intermethod agreement between automated and manual techniques on 3D images, and between automated technique on 3D vs 2D images were evaluated. Automated measurements were feasible in all cases. Automated measurements were considered acceptable in 141 (90.4%) out of the 156 on the first assessments and in all 156 after repeating measurements for unacceptable evaluations. The automated technique on 3D images demonstrated good intra- and interobserver reproducibility. The 3D-automated technique showed a very good agreement with the 3D manual technique. Notably, AoP calculated with the 3D automated technique were significantly wider in comparison with those measured manually on 3D images (133 ± 17° vs 118 ± 21°, p = 0.013). The assessment of the angle of progression through 3D ultrasound is highly reproducible. However, automated software leads to a systematic overestimation of AoP in comparison with the standard manual technique thus hindering its use in clinical practice in its present form.

  4. Site security personnel training manual

    1978-10-01

    As required by 10 CFR Part 73, this training manual provides guidance to assist licensees in the development of security personnel training and qualifications programs. The information contained in the manual typifies the level and scope of training for personnel assigned to perform security related tasks and job duties associated with the protection of nuclear fuel cycle facilities and nuclear power reactors

  5. Kinesiology Workbook and Laboratory Manual.

    Harris, Ruth W.

    This manual is written for students in anatomy, kinesiology, or introductory biomechanics courses. The book is divided into two sections, a kinesiology workbook and a laboratory manual. The two sections parallel each other in content and format. Each is divided into three corresponding sections: (1) Anatomical bases for movement description; (2)…

  6. Dental Chairside Technique. Student's Manual.

    Apfel, Maura; Weaver, Trudy Karlene

    This manual is part of a series dealing with skills and information needed by students in dental assisting. The individualized student materials are suitable for classroom, laboratory, or cooperative training programs. This student manual contains four units covering the following topics: local anesthesia; dental office emergencies; oral hygiene;…

  7. Managerial Accounting. Course Administrative Manual.

    Central Michigan Univ., Mount Pleasant. Inst. for Personal and Career Development.

    This manual is part of the materials for a college-level programmed course in managerial accounting and intended to aid instructors in helping students to work their way through the self-instructional study guide around which the course is organized. The manual describes the various materials and components used in the self-instructional sequence…

  8. 29 CFR 500.41 - Farm labor contractor is responsible for actions of his farm labor contractor employee.

    2010-07-01

    ..., prior to such employee's engagement in any activity enumerated in section 3(6) of the Act. A farm labor... farm labor contractor employee. 500.41 Section 500.41 Labor Regulations Relating to Labor (Continued... PROTECTION Registration of Farm Labor Contractors and Employees of Farm Labor Contractors Engaged in Farm...

  9. La reforma del proceso laboral en Uruguay. El regreso al proceso laboral autónomo

    Hugo Fernández

    2012-12-01

    Full Text Available The reform of the labor process in Uruguay. The return to the autonomous labor processThe reform of the Uruguayan labor process and the return to an autonomous legal regime represent a radical and fundamental change in the national legislation. The simplicity of new procedural structures governed by principles and owns norms of labor discipline give the new regime a dogmatic autonomous space lost for many years. The procedural labor reform is built on the adjectival character of its nature prioritizing the substantive law and adjusting the procedural rule to its characteristics. The principles of Labor Law (substantive and procedural are the foundation of the new regime

  10. The operation and maintenance manual

    Stoll, A.; Krotil, H.; Klein, W.

    1976-01-01

    The operating manual is one of many technical documents which the nuclear power plant operator needs for ensuring safe operation. For the operating staff, however, there is only one document, namely the operating manual. The operating manual is an essential element in bringing man and machine in harmony. This is necessary for safe and, as far as possible, uninterrupted operation of the power plant. The operating manual is the only document containing binding instructions for plant operation. All the tasks of plant operation which are carried out by plant staff are described in the operating manual in a form which is as clear and comprehensible as possible. A considerable number of these tasks can only be carried out by man, namely: 1) tasks concerning operational organization, 2) all non-automated areas of plant operation. (orig./TK) [de

  11. High Quality RNA Isolation from Leaf, Shell, Root Tissues and Callus of Hazelnut (Corylus avellana L.

    Hossein Khosravi

    2017-12-01

    Full Text Available Extraction of high quality RNA is a critical step in molecular genetics studies. Hazelnut is one of the most important nuts plants in the world. The presence of the taxol and other taxanes in hazelnut plant necessitates explaining their biosynthesis pathway and identifying the candidate genes. Therefore, an easy and practical method is necessary for RNA extraction from hazelnuts. Hazelnut has high levels of phenolic compounds. High amounts of polyphenolic and polysaccharide compounds in plants could be causing problems in RNA extraction procedures.  To avoid these problems, a simple and efficient method can be used based on cetyltrimethylammonium bromide (CTAB extraction buffer and lithium chloride for extraction of high quality RNA from different parts of hazelnut plant. Using this method, a high-quality RNA sample (light absorbed in the A260/A280 was 2.04

  12. Development of a high-quality cut-off wall using electrophoresis

    Kawachi, T.; Murahashi, H.

    1991-01-01

    Techniques to build a high-quality cut-off wall have been developed for storage facilities of low-level radioactive waste (LLW) as an emergency measures to prevent leakages. The cut-off wall is highly impermeable, nucleid-adsorptive and have long-term durability. Electrophoresis is used to form impermeable membrane of bentonite as main features of the cut-off wall. First of all, laboratory tests have been conducted to study ways of building barriers on site and to collect data on the barriers properties. Afterwards, on-site construction tests of a high-quality cut-off wall have been carried out. In this paper, we describe the process and results on the studies of the high-quality cut-off wall using electrophoresis

  13. Beyond dualism: Multisegmented labor markets in Ghana

    James Heintz; Fabian Slonimczyk

    2007-01-01

    Using estimates of earnings functions in Ghana, this paper examines patterns of labor market segmentation with regard to formal and informal employment. Persistent earnings differentials are used as indicators of limited mobility across segments of the employed labor force. We find evidence of labor market segmentation between formal and informal employment and between different categories of informal employment which cannot be fully explained by human capital, physical asset, or credit marke...

  14. Immigrants, Labor Market Performance, and Social Insurance

    Bratsberg, Bernt; Raaum, Oddbjørn; Røed, Knut

    2014-01-01

    Using longitudinal data from the date of arrival, we study long- term labor market and social insurance outcomes for all major immigrant cohorts to Norway since 1970. Immigrants from highincome countries performed as natives, while labor migrants from low- income source countries had declining employment rates and increasing disability program participation over the lifecycle. Refugees and family migrants assimilated during the initial period upon arrival, but labor market convergence halted ...

  15. Stainless steel fabrication for high quality requirements in the nuclear industry

    Wareing, A.J.

    1990-01-01

    In this paper the author explains the welding procedures and practices adopted within the nuclear industry to achieve the high quality and standards of welds required. The changeover to mechanised welding, orbital TIG welding and synergic MIG welding, has resulted in consistent achievement of high quality standards as well as optimising the productivity. However, the use of mechanised welding machines does require the welder operating them to be fully trained and qualified. The formally organised training courses are described and the cost savings and production rates achieved by utilising the mechanised method are discussed. (author)

  16. Labor epidural analgesia: Past, present and future

    Reena

    2014-01-01

    Full Text Available One of the most severe pains experienced by a woman is that of childbirth. Providing analgesia for labor has always been a challenge more so because of the myths and controversies surrounding labor. It is imperative to understand the pain transmission during various stages of labor in order to select a proper technique for providing labor analgesia. The adverse effects of labor pain are numerous and affect both the mother as well as the fetus. Currently lumbar epidural is considered to be the gold standard technique for labor analgesia. Local anaesthetics like bupivacaine and ropivacaine are commonly used and adjuvants like clonidine, fentanyl and neostigmine have been extensively studied. However, despite being so popular, epidural analgesia is not without complications, with hypotension being the most common. Other complications include accidental dural puncture, infection, intravascular placement, high block and epidural hematoma. Other neuraxial techniques include continuous caudal analgesia, and combined spinal epidural analgesia. The numerous studies investigating the various aspects of this method have also served to dispel various myths surrounding epidural analgesia like increased incidence of cesarean section and instrumental delivery, prolongation of labor and future back pain. The future of labor analgesia lies in the incorporation of ultrasound in identifying the epidural space helping in proper catheter placement. The keywords "labor epidural" in the PUBMED revealed a total of 5018 articles with 574 review articles and 969 clinical trials. The relevant articles along with their references were extensively studied.

  17. Gender Bias and Child Labor in LDCs

    Alok Kumar; Emma Underhill

    2014-01-01

    Empirical evidence suggests that girls work more than boys as child labor. In this paper, we develop a model to analyze the causes and consequences of the gender differentials in child labor. In particular, we analyze the effects of gender bias on child labor. We find that when parents can give strictly positive bequests to both boys and girls, son preference on its own does not lead to gender differential in child labor. Only when parents cannot give bequests, girls work more than boys as ch...

  18. Corporate Social Responsibility and Labor Agency

    Lund-Thomsen, Peter; Coe, Neil

    This article examines the circumstances under which CSR initiatives facilitate and/or constrain labor agency in GPNs. Using a case study of Nike’s CSR approach in the football manufacturing industry of Pakistan, we explore how the CSR measures advocated in a new, emerging policy paradigm on CSR...... in GPNs affect labor agency at Nike’s main football supplier factory in Pakistan. We argue that international companies may undermine labor agency in GPNs through their sourcing policies, but that their CSR policies could have a potential, albeit limited, positive impact on labor agency in GPNs which...

  19. Analysis of current labor market in Ukraine

    I.B. Yurchyk

    2015-03-01

    Full Text Available The study presents current state of the national labor market and highlights its main trends. We have substantiated the necessity for building institutional support to the labor market in order to meet the needs of Ukrainian economy for innovative development in integrated environment. Measures for promotion of labor market in Ukraine should be: systematization of indicators evaluating its effectiveness; involvement in the assessment of both domestic and foreign experts; permanently identify weaknesses in the institutional support labor market; improving the infrastructure of the labor market. Of particular interest in promoting the efficient functioning of the labor market include the adoption of the concept that would provide incentives for innovative development of institutional support for the labor market. Important for rebirth of man's relation to labor should belong to such institutions as education, culture, family and church. Strategy for the development of effective national labor market should be based on the innovation focus of its institutions, to increase the competitiveness of the workforce and increasing the efficiency of its use in the region.

  20. Manual on radiation haematology

    1971-01-01

    Studies of the biological effects of ionizing radiation have led to the introduction of various measures to protect both the public and personnel engaged in occupations where they could be exposed to such radiations. Many recent studies deal with the basic mechanism of radiation injuries and with their treatment, and some of these investigations have been sponsored by the World Health Organization and the International Atomic Energy Agency. Fundamental studies of the blood-forming tissue have provided the information necessary for formulating recommendations of the International Commission on Radiological Protection. Heinecke in 1903 was the first to note damage to the haemato-poietic tissue after whole-body irradiation. Since that time we have learned much of the functions of the various components of the blood. Many studies have been undertaken to understand the proliferative capacities of the various 'stem' cells involved in the haematopoietic processes and the extent to which these processes can be interfered with by ionizing radiations. We now understand which are the reliable criteria by which radiation damage can be assessed from its effects on the haematopoietic system. In addition, much work has been done to determine how radiation injury to the hematopoietic system may be offset by therapy. In developing countries radiation is being increasingly applied in medical work and many other fields, and there is an immediate need to disseminate information relevant to radiation hazards. This Manual on Radiation Haematology is an attempt at a synthesis of much that is relevant to these matters. As the Contents List shows, many experts have contributed to the book. Their styles have been changed as little as possible. A certain amount of duplication of information could not be avoided; where an editorial decision to remove a passage would have resulted in losing the exact concept that the author wished to express, this passage has been retained. Information from

  1. Labor Mobility and Patenting Activity

    Kaiser, Ulrich; Kongsted, Hans Christian; Rønde, Thomas

    We measure the quantitative importance of labor mobility as a vehicle for the transmission of knowledge and skills across firms. For this purpose we create a unique data set that matches all applications of Danish firms at the European Patent Office to linked employer-employee register data...... for the years 1999-2002. The Danish workforce is split into "R&D workers", who hold a bachelor's or a master's degree in a technical field, and "non{R&D workers". We find that mobile R&D workers ("R&D joiners"') contribute more to patenting activity than immobile R&D workers. Furthermore, R&D workers who have...... previously been employed by a patenting firm ("patent exposed workers") have a larger effect on patenting activity than R&D workers without this experience. Patent exposed R&D joiners constitute the most productive group of workers: for firms that patented prior to 1999, one additional worker of this type...

  2. New highway accident location manual for Missouri.

    2013-12-01

    The Missouri HAL manual is used to identify, analyze, and correct high crash locations, and has not been updated since : 1999. This new edition brings the manual up to date, while incorporating the methodology of the national Highway Safety : Manual ...

  3. ARS-Media for excel instruction manual

    ARS-Media for Excel Instruction Manual is the instruction manual that explains how to use the Excel spreadsheet ARS-Media for Excel application. ARS-Media for Excel Instruction Manual is provided as a pdf file....

  4. TJ-II Library Manual (Version 2)

    Tribaldos, V.; Milligen, B. Ph. van; Lopez-Fraguas, A.

    2001-01-01

    This is a manual of use of the TJ2 Numerical Library that has been developed for making numerical computations of different TJ-II configurations. This manual is a new version of the earlier manual CIEMAT report 806. (Author)

  5. Manual braille writer

    Hawk, Lawrence S.; Turner, Joe H.

    1992-01-01

    A manual-type braille writer that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted.

  6. Manual braille writer

    Hawk, L.S.; Turner, J.H.

    1992-07-28

    A manual-type braille writer is described that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted. 10 figs.

  7. DIMAC program user's manual

    Lee, Byoung Oon; Song, Tae Young

    2003-11-01

    DIMAC (A DIspersion Metallic fuel performance Analysis Code) is a computer program for simulating the behavior of dispersion fuel rods under normal operating conditions of HYPER. It computes the one-dimensional temperature distribution and the thermo-mechanical characteristics of fuel rod under the steady state operation condition, including the swelling and rod deformation. DIMAC was developed based on the experience of research reactor fuel. DIMAC consists of the temperature calculation module, the mechanical swelling calculation module, and the fuel deformation calculation module in order to predict the deformation of a dispersion fuel as a function of power history. Because there are a little of available U-TRU-Zr or TRU-Zr characteristics, the material data of U-Pu-Zr or Pu-Zr are used for those of U-TRU-Zr or TRU-Zr. This report is mainly intended as a user's manual for the DIMAC code. The general description on this code, the description on input parameter, the description on each subroutine, the sample problem and the sample input and partial output are written in this report

  8. DIMAC program user's manual

    Lee, Byoung Oon; Song, Tae Young

    2003-11-01

    DIMAC (A DIspersion Metallic fuel performance Analysis Code) is a computer program for simulating the behavior of dispersion fuel rods under normal operating conditions of HYPER. It computes the one-dimensional temperature distribution and the thermo-mechanical characteristics of fuel rod under the steady state operation condition, including the swelling and rod deformation. DIMAC was developed based on the experience of research reactor fuel. DIMAC consists of the temperature calculation module, the mechanical swelling calculation module, and the fuel deformation calculation module in order to predict the deformation of a dispersion fuel as a function of power history. Because there are a little of available U-TRU-Zr or TRU-Zr characteristics, the material data of U-Pu-Zr or Pu-Zr are used for those of U-TRU-Zr or TRU-Zr. This report is mainly intended as a user's manual for the DIMAC code. The general description on this code, the description on input parameter, the description on each subroutine, the sample problem and the sample input and partial output are written in this repo0008.

  9. IAEA safeguards technical manual

    1982-03-01

    Part F of the Safeguards Technical Manual is being issued in three volumes. Volume 1 was published in 1977 and revised slightly in 1979. Volume 1 discusses basic probability concepts, statistical inference, models and measurement errors, estimation of measurement variances, and calibration. These topics of general interest in a number of application areas, are presented with examples drawn from nuclear materials safeguards. The final two chapters in Volume 1 deal with problem areas unique to safeguards: calculating the variance of MUF and of D respectively. Volume 2 continues where Volume 1 left off with a presentation of topics of specific interest to Agency safeguards. These topics include inspection planning from a design and effectiveness evaluation viewpoint, on-facility site inspection activities, variables data analysis as applied to inspection data, preparation of inspection reports with respect to statistical aspects of the inspection, and the distribution of inspection samples to more than one analytical laboratory. Volume 3 covers generally the same material as Volumes 1 and 2 but with much greater unity and cohesiveness. Further, the cook-book style of the previous two volumes has been replaced by one that makes use of equations and formulas as opposed to computational steps, and that also provides the bases for the statistical procedures discussed. Hopefully, this will help minimize the frequency of misapplications of the techniques

  10. Program management system manual

    1989-08-01

    OCRWM has developed a program management system (PMS) to assist in organizing, planning, directing and controlling the Civilian Radioactive Waste Management Program. A well defined management system is necessary because: (1) the Program is a complex technical undertaking with a large number of participants, (2) the disposal and storage facilities to be developed by the Program must be licensed by the Nuclear Regulatory Commission (NRC) and hence are subject to rigorous quality assurance (QA) requirements, (3) the legislation mandating the Program creates a dichotomy between demanding schedules of performance and a requirement for close and continuous consultation and cooperation with external entities, (4) the various elements of the Program must be managed as parts of an integrated waste management system, (5) the Program has an estimated total system life cycle cost of over $30 billion, and (6) the Program has a unique fiduciary responsibility to the owners and generators of the nuclear waste for controlling costs and minimizing the user fees paid into the Nuclear Waste Fund. This PMS Manual is designed and structured to facilitate strong, effective Program management by providing policies and requirements for organizing, planning, directing and controlling the major Program functions

  11. Stirling engine design manual

    Martini, W. R.

    1978-01-01

    This manual is intended to serve both as an introduction to Stirling engine analysis methods and as a key to the open literature on Stirling engines. Over 800 references are listed and these are cross referenced by date of publication, author and subject. Engine analysis is treated starting from elementary principles and working through cycles analysis. Analysis methodologies are classified as first, second or third order depending upon degree of complexity and probable application; first order for preliminary engine studies, second order for performance prediction and engine optimization, and third order for detailed hardware evaluation and engine research. A few comparisons between theory and experiment are made. A second order design procedure is documented step by step with calculation sheets and a worked out example to follow. Current high power engines are briefly described and a directory of companies and individuals who are active in Stirling engine development is included. Much remains to be done. Some of the more complicated and potentially very useful design procedures are now only referred to. Future support will enable a more thorough job of comparing all available design procedures against experimental data which should soon be available.

  12. Korean Emotional Laborers' Job Stressors and Relievers: Focus on Work Conditions and Emotional Labor Properties

    Garam Lee

    2015-01-01

    Background: The present study aims to investigate job stressors and stress relievers for Korean emotional laborers, specifically focusing on the effects of work conditions and emotional labor properties. Emotional laborers are asked to hide or distort their real emotions in their interaction with clients. They are exposed to high levels of stress in the emotional labor process, which leads to serious mental health risks including burnout, depression, and even suicide impulse. Exploring job st...

  13. Randomized comparison of oral misoprostol and oxytocin for labor induction in term prelabor membrane rupture.

    Butt, K D; Bennett, K A; Crane, J M; Hutchens, D; Young, D C

    1999-12-01

    To compare labor induction intervals between oral misoprostol and intravenous oxytocin in women who present at term with premature rupture of membranes. One hundred eight women were randomly assigned to misoprostol 50 microg orally every 4 hours as needed or intravenous oxytocin. The primary outcome measure was time from induction to vaginal delivery. Sample size was calculated using a two-tailed alpha of 0.05 and power of 80%. Baseline demographic data, including maternal age, gestation, parity, Bishop score, birth weight, and group B streptococcal status, were similar. The mean time +/-standard deviation to vaginal birth with oral misoprostol was 720+/-382 minutes compared with 501+/-389 minutes with oxytocin (P = .007). The durations of the first, second, and third stages of labor were similar. There were no differences in maternal secondary outcomes, including cesarean birth (eight and seven, respectively), infection, maternal satisfaction with labor, epidural use, perineal trauma, manual placental removal, or gastrointestinal side effects. Neonatal outcomes including cord pH, Apgar scores, infection, and admission to neonatal intensive care unit were not different. Although labor induction with oral misoprostol was effective, oxytocin resulted in a shorter induction-to-delivery interval. Active labor intervals and other maternal and neonatal outcomes were similar.

  14. Bt cotton and employment effects for female agricultural laborers in Pakistan.

    Kouser, Shahzad; Abedullah; Qaim, Matin

    2017-01-25

    The literature about economic and social impacts of Bt cotton adoption on farm households in developing countries is growing. Yet, there is still uncertainty about wider implications of this technology for rural development, including effects for landless rural laborers. Bt-related yield advantages may lead to intensified production and higher demand for labor. Building on farm survey data collected in Pakistan and using double-hurdle regression models, we analyze employment effects of Bt cotton adoption. Model estimates show that Bt adoption has increased the demand for hired labor by 55%. Manual harvesting, which is common in Pakistan, is a labor-intensive activity primarily carried out by female laborers. Accordingly, gender disaggregation shows that the employment-generating effects are particularly strong for women, who often belong to the most disadvantaged groups of rural societies. These results suggest that Bt technology can contribute to additional employment income for the poor and to more equitable rural development. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Technical skills requirement of Indonesian construction labors to work in Malaysia

    Adi, Henny Pratiwi

    2017-03-01

    Labors skills is an important part of construction projects implementation. Suitability between the skills possessed by labors with the skills needed by user is required to increase employment opportunities. Malaysia is a country that using construction labors from Indonesia. This study aims to get the kind of technical skills required by users of Indonesian constructian labors in Malaysia and also the importance level of technical skills. Data collecting in this research was conducted through interviews and questionnaires on contractors in Malaysia. The next stage was determine the importance level of technical skills in work field of carpenter, bricklayer, plumber and painters. The importance level of technical skills analyzed using the Relative Importance Index (RII). The results showed that mastering the operation of both instruments either manually or electrically is the most importance in the technical skills. Therefore, an understanding of the types of equipment for work field and the manner of operation is need to had by Indonesian construction labors who will work in Malaysia.

  16. The assessment of labor: a brief history.

    Cohen, Wayne R; Friedman, Emanuel A

    2018-01-26

    In the 1930s, investigators in the US, Germany and Switzerland made the first attempts to quantify the course of labor in a clinically meaningful way. They emphasized the rupture of membranes as a pivotal event governing labor progress. Attention was also placed on the total number of contractions as a guide to normality. Beginning in the 1950s, Friedman determined that changes in cervical dilatation and fetal station over time were the most useful parameters for the assessment of labor progress. He showed all normal labors had similar patterns of dilatation and descent, differing only in the durations and slopes of their component parts. These observations led to the formulation of criteria that elevated the assessment of labor from a rather arbitrary exercise to one guided by scientific objectivity. Researchers worldwide confirmed the basic nature of labor curves and validated their functionality. This system allows us to quantify the effects of parity, analgesia, maternal obesity, prior cesarean, maternal age, and fetal presentation and position on labor. It permits analysis of outcomes associated with labor aberrations, quantifies the effectiveness of treatments and assesses the need for cesarean delivery. Also, dysfunctional labor patterns serve as indicators of short- and long-term risks to offspring. We still lack the necessary translational research to link the physiologic manifestations of uterine contractility with changes in dilatation and descent. Recent efforts to interpret electrohysterographic patterns hold promise in this regard, as does preliminary exploration into the molecular basis of dysfunctional labor. For now, the clinician is best served by a system of labor assessment proposed more than 60 years ago and embellished upon in considerable detail since.

  17. HVAC system operation manual of IMEF

    Baek, Sang Yeol; Park, Dae Kyu; Ahn, Sang Bok; Ju, Yong Sun.

    1997-06-01

    This manual is operation procedures of the IMEF(Irradiated Material Examination Facility) HVAC(Heating, Ventilation and Air Conditioning) System. General operation procedures and test method of the IMEF HVAC system are described. The manual is as follows; 1. HVAC system operation manual 2. HVAC system management guide 3. HVAC system maintenance manual 4. HVAC system air velocity and flowrate measurement manual 5. HVAC system HEPA filter leak test manual 6. HVAC system charcoal filter leak test manual 7. HVAC system HEPA and charcoal filter exchange manual. (author). 8 tabs

  18. Labor and health status in economic evaluation of health care. The Health and Labor Questionnaire

    van Roijen, L.; Essink-Bot, M. L.; Koopmanschap, M. A.; Bonsel, G.; Rutten, F. F.

    1996-01-01

    A health care program may influence both costs and health effects. We developed the Health and Labor Questionnaire (HLQ), which consists of four modules, to collect data on absence from work, reduced productivity, unpaid labor production, and labor-related problems. We applied the HLQ in several

  19. Is automation labor-displacing? : Productivity growth, employment, and the labor share

    Autor, David; Salomons, A.M.|info:eu-repo/dai/nl/338041575

    2018-01-01

    Is automation a labor-displacing force? This possibility is both an age-old concern and at the heart of a new theoretical literature considering how labor immiseration may result from a wave of “brilliant machines,” which is in part motivated by declining labor shares in many developed countries.

  20. Manual therapy and exercise for rotator cuff disease.

    Page, Matthew J; Green, Sally; McBain, Brodwen; Surace, Stephen J; Deitch, Jessica; Lyttle, Nicolette; Mrocki, Marshall A; Buchbinder, Rachelle

    2016-06-10

    43 trials. We were unable to perform any meta-analyses because of clinical heterogeneity or incomplete outcome reporting. One trial compared manual therapy and exercise with placebo (inactive ultrasound therapy) in 120 participants with chronic rotator cuff disease (high quality evidence). At 22 weeks, the mean change in overall pain with placebo was 17.3 points on a 100-point scale, and 24.8 points with manual therapy and exercise (adjusted mean difference (MD) 6.8 points, 95% confidence interval (CI) -0.70 to 14.30 points; absolute risk difference 7%, 1% fewer to 14% more). Mean change in function with placebo was 15.6 points on a 100-point scale, and 22.4 points with manual therapy and exercise (adjusted MD 7.1 points, 95% CI 0.30 to 13.90 points; absolute risk difference 7%, 1% to 14% more). Fifty-seven per cent (31/54) of participants reported treatment success with manual therapy and exercise compared with 41% (24/58) of participants receiving placebo (risk ratio (RR) 1.39, 95% CI 0.94 to 2.03; absolute risk difference 16% (2% fewer to 34% more). Thirty-one per cent (17/55) of participants reported adverse events with manual therapy and exercise compared with 8% (5/61) of participants receiving placebo (RR 3.77, 95% CI 1.49 to 9.54; absolute risk difference 23% (9% to 37% more). However adverse events were mild (short-term pain following treatment).Five trials (low quality evidence) found no important differences between manual therapy and exercise compared with glucocorticoid injection with respect to overall pain, function, active shoulder abduction and quality of life from four weeks up to 12 months. However, global treatment success was more common up to 11 weeks in people receiving glucocorticoid injection (low quality evidence). One trial (low quality evidence) showed no important differences between manual therapy and exercise and arthroscopic subacromial decompression with respect to overall pain, function, active range of motion and strength at six and

  1. Producing high-quality negatives from ERTS black-and-white transparancies

    Richard J. Myhre

    1973-01-01

    A method has been devised for producing high-quality black-and-white negatives quickly and efficiently from dense transparencies orgininating from Earth Resources Technology Satellite imagery. Transparencies are evaluated on a standard light source to determine exposure and processing information needed for making negatives. A “System ASA Rating” was developed by...

  2. Study on the Introduction of High-Quality Educational Resources for Sino-Foreign Cooperative Education

    Jinhui, Lin

    2016-01-01

    In Sino-foreign cooperative education, high-quality introduced educational resources must benefit the growth and development of students, facilitate the school's capacity building and the improvement of overall educational standards, and promote national socioeconomic development. It is necessary to establish and perfect the various working…

  3. High quality ion channels recordings on an injection molded polymer chip

    Tanzi, Simone

    In this thesis we demonstrate high quality recordings of the ion channel activity across the cell membrane in a biological cell by employing the so called patch clamping technique on an injection molded polymer microfluidic device. Such recordings are traditionally made using glass micropipettes,...

  4. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization

    Saidaminov, Makhsud I.; Abdelhady, Ahmed L.; Banavoth, Murali; Alarousu, Erkki; Burlakov, Victor M.; Peng, Wei; Dursun, Ibrahim; Wang, Lingfei; He, Yao; Maculan, Giacomo; Goriely, Alain; Wu, Tao; Mohammed, Omar F.; Bakr, Osman

    2015-01-01

    Single crystals of methylammonium lead trihalide perovskites (MAPbX3; MA=CH3NH3+, X=Br− or I−) have shown remarkably low trap density and charge transport properties; however, growth of such high-quality semiconductors is a time-consuming process

  5. Animated Cell Biology: A Quick and Easy Method for Making Effective, High-Quality Teaching Animations

    O'Day, Danton H.

    2006-01-01

    There is accumulating evidence that animations aid learning of dynamic concepts in cell biology. However, existing animation packages are expensive and difficult to learn, and the subsequent production of even short animations can take weeks to months. Here I outline the principles and sequence of steps for producing high-quality PowerPoint…

  6. Emotional Experience, Expression, and Regulation of High-Quality Japanese Elementary School Teachers

    Hosotani, Rika; Imai-Matsumura, Kyoko

    2011-01-01

    The present study investigates the emotional experience, expression, and regulation processes of high-quality Japanese elementary school teachers while they interact with children, in terms of teachers' emotional competence. Qualitative analysis of interview data demonstrated that teachers had various emotional experiences including self-elicited…

  7. High quality factor GaAs microcavity with buried bullseye defects

    Winkler, K.; Gregersen, Niels; Hayrynen, T.

    2018-01-01

    The development of high quality factor solid-state microcavities with low mode volumes has paved the way towards on-chip cavity quantum electrodynamics experiments and the development of high-performance nanophotonic devices. Here, we report on the implementation of a new kind of solid...

  8. 75 FR 41693 - Export Inspection and Weighing Waiver for High Quality Specialty Grains Transported in Containers

    2010-07-19

    ... Specialty Grains Transported in Containers AGENCY: Grain Inspection, Packers and Stockyards Administration... rule to potentially make permanent the current waiver for high quality grain exported in containers... exported in containers that was established by a final rule on December 13, 2005 (70 FR 73556). This...

  9. A safe inexpensive method to isolate high quality plant and fungal ...

    STORAGESEVER

    2008-08-18

    Aug 18, 2008 ... quality DNA from plant and fungal species. This method uses potassium acetate to remove proteins and polysaccharides in an SDS extraction buffer. Further DNA purification is achieved using a low salt. CTAB treatment. This SDS/CTAB protocol was used to isolate high quality genomic DNA subject to.

  10. Student Writing Accepted as High-Quality Responses to Analytic Text-Based Writing Tasks

    Wang, Elaine; Matsumura, Lindsay Clare; Correnti, Richard

    2018-01-01

    Literacy standards increasingly emphasize the importance of analytic text-based writing. Little consensus exists, however, around what high-quality student responses should look like in this genre. In this study, we investigated fifth-grade students' writing in response to analytic text-based writing tasks (15 teachers, 44 writing tasks, 88 pieces…

  11. Toward High Quality Family Day Care for Infants and Toddlers. Final Report.

    Rauch, Marian D.; Crowell, Doris C.

    Reported were the results of a project which established a cluster of family day care homes in Hawaii in which caregivers were selected, trained, and provided with supportive services and salaries. The primary objective of the program was to provide a replicable, high quality program for preschool children that would maximize social, emotional,…

  12. Optimization of nitridation conditions for high quality inter-polysilicon dielectric layers

    Klootwijk, J.H.; Bergveld, H.J.; van Kranenburg, H.; Woerlee, P.H.; Wallinga, Hans

    1996-01-01

    Nitridation of deposited high temperature oxides (HTO) was studied to form high quality inter-polysilicon dielectric layers for embedded non volatile memories. Good quality dielectric layers were obtained earlier by using an optimized deposition of polysilicon and by performing a post-dielectric

  13. 10 Principles for Building a High-Quality System of Assessments

    Jobs for the Future, 2018

    2018-01-01

    Many states and districts are working toward developing and implementing high-quality systems that align assessments with each other, and to college and career readiness, and a comprehensive set of higher-order thinking skills. In order to support states, districts, and communities in this, the following 10 principles as guidance and common…

  14. Access, Participation, and Supports: The Defining Features of High-Quality Inclusion

    Buysse, Virginia

    2011-01-01

    This article describes current knowledge about early childhood inclusion, summarizing research and the DEC/NAEYC joint position statement on inclusion. The article also describes effective or promising educational practices that promote access, participation, and supports--the defining features of high-quality inclusion. Future efforts to improve…

  15. Integrated Pathology Informatics Enables High-Quality Personalized and Precision Medicine: Digital Pathology and Beyond.

    Volynskaya, Zoya; Chow, Hung; Evans, Andrew; Wolff, Alan; Lagmay-Traya, Cecilia; Asa, Sylvia L

    2018-03-01

    - The critical role of pathology in diagnosis, prognosis, and prediction demands high-quality subspecialty diagnostics that integrates information from multiple laboratories. - To identify key requirements and to establish a systematic approach to providing high-quality pathology in a health care system that is responsible for services across a large geographic area. - This report focuses on the development of a multisite pathology informatics platform to support high-quality surgical pathology and hematopathology using a sophisticated laboratory information system and whole slide imaging for histology and immunohistochemistry, integrated with ancillary tools, including electron microscopy, flow cytometry, cytogenetics, and molecular diagnostics. - These tools enable patients in numerous geographic locations access to a model of subspecialty pathology that allows reporting of every specimen by the right pathologist at the right time. The use of whole slide imaging for multidisciplinary case conferences enables better communication among members of patient care teams. The system encourages data collection using a discrete data synoptic reporting module, has implemented documentation of quality assurance activities, and allows workload measurement, providing examples of additional benefits that can be gained by this electronic approach to pathology. - This approach builds the foundation for accurate big data collection and high-quality personalized and precision medicine.

  16. A Novel Approach to High-Quality Postmortem Tissue Procurement: The GTEx Project

    Carithers, Latarsha J.; Ardlie, Kristin; Barcus, Mary; Branton, Philip A.; Britton, Angela; Buia, Stephen A.; Compton, Carolyn C.; Deluca, David S.; Peter-Demchok, Joanne; Gelfand, Ellen T.; Guan, Ping; Korzeniewski, Greg E.; Lockhart, Nicole C.; Rabiner, Chana A.; Rao, Abhi K.; Robinson, Karna L.; Roche, Nancy V.; Sawyer, Sherilyn J.; Segrè, Ayellet V.; Shive, Charles E.; Smith, Anna M.; Sobin, Leslie H.; Undale, Anita H.; Valentino, Kimberly M.; Vaught, Jim; Young, Taylor R.; Moore, Helen M.; Barker, Laura; Basile, Margaret; Battle, Alexis; Boyer, Joy; Bradbury, Debra; Bridge, Jason P.; Brown, Amanda; Burges, Robin; Choi, Christopher; Colantuoni, Deborah; Cox, Nancy; Dermitzakis, Emmanouil T.; Derr, Leslie K.; Dinsmore, Michael J.; Erickson, Kenyon; Fleming, Johnelle; Flutre, Timothée; Foster, Barbara A.; Gamazon, Eric R.; Getz, Gad; Gillard, Bryan M.; Guigo, Roderic; Hambright, Kenneth W.; Hariharan, Pushpa; Hasz, Rick; Im, Hae K.; Jewell, Scott; Karasik, Ellen; Kellis, Manolis; Kheradpour, Pouya; Koester, Susan; Koller, Daphne; Konkashbaev, Anuar; Lappalainen, Tuuli; Little, Roger; Liu, Jun; Lo, Edmund; Lonsdale, John T.; Lu, Chunrong; MacArthur, Daniel G.; Magazine, Harold; Maller, Julian B.; Marcus, Yvonne; Mash, Deborah C.; McCarthy, Mark I.; McLean, Jeffrey; Mestichelli, Bernadette; Miklos, Mark; Monlong, Jean; Mosavel, Magboeba; Moser, Michael T.; Mostafavi, Sara; Nicolae, Dan L.; Pritchard, Jonathan; Qi, Liqun; Ramsey, Kimberly; Rivas, Manuel A.; Robles, Barnaby E.; Rohrer, Daniel C.; Salvatore, Mike; Sammeth, Michael; Seleski, John; Shad, Saboor; Siminoff, Laura A.; Stephens, Matthew; Struewing, Jeff; Sullivan, Timothy; Sullivan, Susan; Syron, John; Tabor, David; Taherian, Mehran; Tejada, Jorge; Temple, Gary F.; Thomas, Jeffrey A.; Thomson, Alexander W.; Tidwell, Denee; Traino, Heather M.; Tu, Zhidong; Valley, Dana R.; Volpi, Simona; Walters, Gary D.; Ward, Lucas D.; Wen, Xiaoquan; Winckler, Wendy; Wu, Shenpei; Zhu, Jun

    2015-01-01

    The Genotype-Tissue Expression (GTEx) project, sponsored by the NIH Common Fund, was established to study the correlation between human genetic variation and tissue-specific gene expression in non-diseased individuals. A significant challenge was the collection of high-quality biospecimens for

  17. High quality data: An evaluation of AIM data quality and data quality procedures

    The goal of every monitoring program is to collect high-quality data which can then be used to provide information to decision makers. The Bureau of Land Management (BLM) Assessment, Inventory, and Monitoring (AIM) program is one such data set which provides rangeland status, condition, and trend in...

  18. Timing of high-quality child care and cognitive, language, and preacademic development.

    Li, Weilin; Farkas, George; Duncan, Greg J; Burchinal, Margaret R; Vandell, Deborah Lowe

    2013-08-01

    The effects of high- versus low-quality child care during 2 developmental periods (infant-toddlerhood and preschool) were examined using data from the National Institute of Child Health and Human Development Study of Early Child Care. Propensity score matching was used to account for differences in families who used different combinations of child care quality during the 2 developmental periods. Findings indicated that cognitive, language, and preacademic skills prior to school entry were highest among children who experienced high-quality care in both the infant-toddler and preschool periods, somewhat lower among children who experienced high-quality child care during only 1 of these periods, and lowest among children who experienced low-quality care during both periods. Irrespective of the care received during infancy-toddlerhood, high-quality preschool care was related to better language and preacademic outcomes at the end of the preschool period; high-quality infant-toddler care, irrespective of preschool care, was related to better memory skills at the end of the preschool period. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

  19. From journal to headline: the accuracy of climate science news in Danish high quality newspapers

    Vestergård, Gunver Lystbæk

    2011-01-01

    analysis to examine the accuracy of Danish high quality newspapers in quoting scientific publications from 1997 to 2009. Out of 88 articles, 46 contained inaccuracies though the majority was found to be insignificant and random. The study concludes that Danish broadsheet newspapers are ‘moderately...

  20. Dare to share? How people share high-quality knowledge in online communities

    Rotundo, Enrico; Blank, M.; Moser, C.; Leopold, H.

    The Internet has fundamentally changed how work gets done in the 21st century. For example, people increasingly spend time on the Internet where they share and develop knowledge in online communities. Yet, little is known about how high-quality knowledge comes about in these communities. This is

  1. Emblems of Quality in Higher Education. Developing and Sustaining High-Quality Programs.

    Haworth, Jennifer Grant; Conrad, Clifton F.

    This book proposes an "engagement" theory of program quality to evaluate and improve higher education programs at all degree levels. Based on interviews with 781 participants in a national study of Masters degree programs, it focuses on the interactive roles of students, faculty, and administrators in developing high-quality programs…

  2. Low-Cost 3D Printers Enable High-Quality and Automated Sample Preparation and Molecular Detection.

    Kamfai Chan

    Full Text Available Most molecular diagnostic assays require upfront sample preparation steps to isolate the target's nucleic acids, followed by its amplification and detection using various nucleic acid amplification techniques. Because molecular diagnostic methods are generally rather difficult to perform manually without highly trained users, automated and integrated systems are highly desirable but too costly for use at point-of-care or low-resource settings. Here, we showcase the development of a low-cost and rapid nucleic acid isolation and amplification platform by modifying entry-level 3D printers that cost between $400 and $750. Our modifications consisted of replacing the extruder with a tip-comb attachment that houses magnets to conduct magnetic particle-based nucleic acid extraction. We then programmed the 3D printer to conduct motions that can perform high-quality extraction protocols. Up to 12 samples can be processed simultaneously in under 13 minutes and the efficiency of nucleic acid isolation matches well against gold-standard spin-column-based extraction technology. Additionally, we used the 3D printer's heated bed to supply heat to perform water bath-based polymerase chain reactions (PCRs. Using another attachment to hold PCR tubes, the 3D printer was programmed to automate the process of shuttling PCR tubes between water baths. By eliminating the temperature ramping needed in most commercial thermal cyclers, the run time of a 35-cycle PCR protocol was shortened by 33%. This article demonstrates that for applications in resource-limited settings, expensive nucleic acid extraction devices and thermal cyclers that are used in many central laboratories can be potentially replaced by a device modified from inexpensive entry-level 3D printers.

  3. Low-Cost 3D Printers Enable High-Quality and Automated Sample Preparation and Molecular Detection

    Chan, Kamfai; Coen, Mauricio; Hardick, Justin; Gaydos, Charlotte A.; Wong, Kah-Yat; Smith, Clayton; Wilson, Scott A.; Vayugundla, Siva Praneeth; Wong, Season

    2016-01-01

    Most molecular diagnostic assays require upfront sample preparation steps to isolate the target’s nucleic acids, followed by its amplification and detection using various nucleic acid amplification techniques. Because molecular diagnostic methods are generally rather difficult to perform manually without highly trained users, automated and integrated systems are highly desirable but too costly for use at point-of-care or low-resource settings. Here, we showcase the development of a low-cost and rapid nucleic acid isolation and amplification platform by modifying entry-level 3D printers that cost between $400 and $750. Our modifications consisted of replacing the extruder with a tip-comb attachment that houses magnets to conduct magnetic particle-based nucleic acid extraction. We then programmed the 3D printer to conduct motions that can perform high-quality extraction protocols. Up to 12 samples can be processed simultaneously in under 13 minutes and the efficiency of nucleic acid isolation matches well against gold-standard spin-column-based extraction technology. Additionally, we used the 3D printer’s heated bed to supply heat to perform water bath-based polymerase chain reactions (PCRs). Using another attachment to hold PCR tubes, the 3D printer was programmed to automate the process of shuttling PCR tubes between water baths. By eliminating the temperature ramping needed in most commercial thermal cyclers, the run time of a 35-cycle PCR protocol was shortened by 33%. This article demonstrates that for applications in resource-limited settings, expensive nucleic acid extraction devices and thermal cyclers that are used in many central laboratories can be potentially replaced by a device modified from inexpensive entry-level 3D printers. PMID:27362424

  4. La selectividad como riesgo laboral en la labor docente universitaria

    Alvarez Martinez, Pedro

    2005-01-01

    Full Text Available En la actualidad no hay datos que sirvan de soporte para analizar la contribución de los alumnos en el fracaso escolar. Para lo cual, se ha elaborado un test con una serie de items que determinan el grado de cumplimiento de la “actividad discente” recogida en los siguientes campos: asistir a clase, hacer uso de las tutorías para resolver dudas, estudio diario para poder llevar a cabo una evaluación continua, asistir a los exámenes finales, y nivel de preparación básica e interés con que los alumnos llegan a la universidad para que los profesores puedan trabajar. El control para que este comportamiento no ocurra está en la selectividad. Una selectividad inadecuada conduce a los profesores a un estado de ansiedad, estrés laboral, y burn-out (quemado que con el mobbing que provoca el acoso de una evaluación docente mal entendida hace cada vez más inviable el trabajo docente.

  5. "Subconscious" Sex Bias and Labor Market Reality.

    Baldwin, Stephen E.

    1979-01-01

    Discusses the contention that the resentment some men feel toward working women is based on sympathy toward unemployed male breadwinners. Argues that this rationalization ignores the gross discrepancy in the size of the two labor force groups and the real issues in labor market discrimination against women. (Author/IRT)

  6. Wage and Hour Farm Labor Laws.

    Hertel, Catherine

    This paper, by a teacher of migrants, summarizes various farm labor laws and child labor laws pertaining to migrant and seasonal workers. The Migrant and Seasonal Agricultural Worker Protection Act of 1983 provides workers with assurances about pay, hours, and working conditions, including safety and health. This legislation permits anyone…

  7. Empirical studies in labor and education economics

    Ketel, N.

    2016-01-01

    The chapters of this thesis focus on policy-relevant research questions in economics of education and labor economics. All chapters make use of randomized experiments in order to answer these questions. The second chapter studies the returns to medical school in a regulated labor market, by

  8. The Labor Market and the Great Recession

    Hobijn, B.; Elsby, M.W.L.; Sahin, A.

    2010-01-01

    From the perspective of a wide range of labor market outcomes, the recession that began in 2007 represents the deepest downturn in the postwar era. Early on, the nature of labor market adjustment displayed a notable resemblance to that observed in past severe downturns. During the latter half of

  9. Macroeconomic implications of labor market frictions

    Sedláček, P.

    2011-01-01

    Fluctuations in economic activity, business cycles, are a fact of life. An important factor shaping the character of economic fluctuations is the labor market. However, the labor market does not operate smoothly. Neither workers, nor firms are all the same. Therefore, it often requires a substantial

  10. "American Gothic" and the Division of Labor.

    Saunders, Robert J.

    1987-01-01

    Provides historical review of gender-based division of labor. Argues that gender-based division of labor served a purpose in survival of tribal communities but has lost meaning today and may be a handicap to full use of human talent and ability in the arts. There is nothing in various art forms which make them more appropriate for males or…

  11. 75 FR 55251 - Labor Day, 2010

    2010-09-09

    ... immeasurable contributions of working men and women today and throughout our history. As we recognize the... and that of organized labor in our national life. Workers have not always possessed the same rights... aisles of today's superstores, organized labor has provided millions of hard-working men and women with a...

  12. A Labor Perspective on Basic Skills.

    Sarmiento, Anthony R.

    Most major workplace literacy programs involve unions. Organized labor's current leadership in worker education and training is not a continuation of earlier activities but an expansion of union interest and activity that is unprecedented in the history of organized labor. These efforts do not rely on public funding, because many unions have…

  13. Gender analysis of the Russian labor market

    Aleksandr Mikhailovich Panov

    2014-07-01

    Full Text Available The issue of gender inequality in the labor market affects all world countries to some extent. As salary is the basis of population’s sources of income in Russia, unequal pay to men and women for equal work can trigger gender discrimination in the labor market and beyond. The article focusses on the gender analysis of the Russian labor market. It focuses on conjunctural conditions of the labor market in a gender aspect, socio-economic characteristics of men and women as subjects of the labor market and the institutional features of the Russian labor market. The study reveals that, despite lower wages, women, judging by their socio-economic characteristics, possess competitive advantages over men, having higher level of education and better state of health. In addition to horizontal segregation, traditional partition of industries to “male” and “female”, the main causes of gender wage gaps are discriminatory social attitudes and social role of women. The issue to address gender discrimination in the modern Russian society becomes more critical due to contradiction between normative-legal acts, stipulating the gender equality in all spheres of life, and discriminatory social attitudes. The article gives a brief overview of research and practice publications on the problem of gender disparities in labor remuneration and methods to address them in the developed world. The state statistical monitoring of labor productivity in terms of gender is considered as a tool for in-depth study of discrimination

  14. US Investment Treaties and Labor Standards

    Kwan-Ho Kim

    2006-06-01

    Full Text Available Korea and the United States declared the start of negotiations for the establishment of a free trade agreement. The FTA will include investment chapter. That means the Korea-US BIT (Bilateral Investment Treaty talk, which has been deadlocked since 1998, resumes as a part of FTA negotiations. The FTA investment chapter will be based on the US model BIT, which has been updated in 2004. The updated BIT version includes labor clause which provides that parties should not weaken labor standards in an effort to attract foreign investment. This clause is grounded on the criticism raised by labor groups which asserts that competition among countries to attract foreign investment leads to bidding wars in labor standards. No solid evidence is found in support of the hypothesis that foreign investors favor countries with lower labor standards. Nonetheless, some countries have offered special incentives to investors that limit labor rights in the belief that doing so would help attract foreign investment, especially in export processing or special economic zones. In this regard, the Korea's Act on free economic zones which provides exceptional labor standards to foreign invested enterprise in those zones may become an issue in reaching the FTA. This article contemplates the "not lowering labor standards" provision in the US BIT model and its implications on the FTA talks with the US.

  15. International Trade and Labor Market Discrimination

    R. Chisik (Richard); J.E. Namini (Julian Emami)

    2016-01-01

    textabstractWe embed a competitive search model with labor market discrimination, or nepotism, into a two-sector, two-country framework in order to analyze how labor market discrimination impacts the pattern of international trade and also how trade trade affects discrimination. Discrimination, or

  16. FAMIAS User Manual

    Zima, Wolfgang

    2008-10-01

    The excitation of pulsation modes in Beta Cephei and Slowly Pulsating B stars is known to be very sensitive to opacity changes in the stellar interior where T ~ 2 x 10E5 K. In this region differences in opacity up to ~ 50% can be induced by the choice between OPAL and OP opacity tables, and between two different metal mixtures (Grevesse & Noels 1993 and Asplund et al. 2005). We have extended the non-adiabatic computations presented in Miglio et al. (2007) towards models of higher mass and pulsation modes of degree l = 3, and we present here the instability domains in the HR- and log P-log Teff diagrams resulting from different choices of opacity tables, and for three different metallicities. FAMIAS (Frequency Analysis and Mode Identification for AsteroSeismology) is a collection of state-of-the-art software tools for the analysis of photometric and spectroscopic time series data. It is one of the deliverables of the Work Package NA5: Asteroseismology of the European Coordination Action in Helio-and Asteroseismology (HELAS). Two main sets of tools are incorporated in FAMIAS. The first set allows to search for periodicities in the data using Fourier and non-linear least-squares fitting algorithms. The other set allows to carry out a mode identification for the detected pulsation frequencies to determine their pulsational quantum numbers, the harmonic degree, m. The types of stars to which famias is applicable are main-sequence pulsators hotter than the Sun. This includes the Gamma Dor stars, Delta Sct stars, the slowly pulsating B stars and the Beta Cep stars - basically all pulsating main-sequence stars, for which empirical mode identification is required to successfully carry out asteroseismology. This user manual describes how to use the different features of FAMIAS and provides two tutorials that demonstrate the usage of FAMIAS for spectroscopic and photometric mode identification.

  17. SAM Theory Manual

    Hu, Rui [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-03-01

    The System Analysis Module (SAM) is an advanced and modern system analysis tool being developed at Argonne National Laboratory under the U.S. DOE Office of Nuclear Energy’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. SAM development aims for advances in physical modeling, numerical methods, and software engineering to enhance its user experience and usability for reactor transient analyses. To facilitate the code development, SAM utilizes an object-oriented application framework (MOOSE), and its underlying meshing and finite-element library (libMesh) and linear and non-linear solvers (PETSc), to leverage modern advanced software environments and numerical methods. SAM focuses on modeling advanced reactor concepts such as SFRs (sodium fast reactors), LFRs (lead-cooled fast reactors), and FHRs (fluoride-salt-cooled high temperature reactors) or MSRs (molten salt reactors). These advanced concepts are distinguished from light-water reactors in their use of single-phase, low-pressure, high-temperature, and low Prandtl number (sodium and lead) coolants. As a new code development, the initial effort has been focused on modeling and simulation capabilities of heat transfer and single-phase fluid dynamics responses in Sodium-cooled Fast Reactor (SFR) systems. The system-level simulation capabilities of fluid flow and heat transfer in general engineering systems and typical SFRs have been verified and validated. This document provides the theoretical and technical basis of the code to help users understand the underlying physical models (such as governing equations, closure models, and component models), system modeling approaches, numerical discretization and solution methods, and the overall capabilities in SAM. As the code is still under ongoing development, this SAM Theory Manual will be updated periodically to keep it consistent with the state of the development.

  18. Exome sequencing generates high quality data in non-target regions

    Guo Yan

    2012-05-01

    Full Text Available Abstract Background Exome sequencing using next-generation sequencing technologies is a cost efficient approach to selectively sequencing coding regions of human genome for detection of disease variants. A significant amount of DNA fragments from the capture process fall outside target regions, and sequence data for positions outside target regions have been mostly ignored after alignment. Result We performed whole exome sequencing on 22 subjects using Agilent SureSelect capture reagent and 6 subjects using Illumina TrueSeq capture reagent. We also downloaded sequencing data for 6 subjects from the 1000 Genomes Project Pilot 3 study. Using these data, we examined the quality of SNPs detected outside target regions by computing consistency rate with genotypes obtained from SNP chips or the Hapmap database, transition-transversion (Ti/Tv ratio, and percentage of SNPs inside dbSNP. For all three platforms, we obtained high-quality SNPs outside target regions, and some far from target regions. In our Agilent SureSelect data, we obtained 84,049 high-quality SNPs outside target regions compared to 65,231 SNPs inside target regions (a 129% increase. For our Illumina TrueSeq data, we obtained 222,171 high-quality SNPs outside target regions compared to 95,818 SNPs inside target regions (a 232% increase. For the data from the 1000 Genomes Project, we obtained 7,139 high-quality SNPs outside target regions compared to 1,548 SNPs inside target regions (a 461% increase. Conclusions These results demonstrate that a significant amount of high quality genotypes outside target regions can be obtained from exome sequencing data. These data should not be ignored in genetic epidemiology studies.

  19. A Narrative Review of High-Quality Literature on the Effects of Resident Duty Hours Reforms.

    Lin, Henry; Lin, Emery; Auditore, Stephanie; Fanning, Jon

    2016-01-01

    To summarize current high-quality studies evaluating the effect and efficacy of resident duty hours reforms (DHRs) on patient safety and resident education and well-being. The authors searched PubMed and Medline in August 2012 and again in May 2013 for literature (1987-2013) about the effects of DHRs. They assessed the quality of articles using the Medical Education Research Study Quality Instrument (MERSQI) scoring system. They considered randomized controlled trials (RCTs), partial RCTs, and all studies with a MERSQI score ≥ 14 to be "high-quality" methodology studies. A total of 72 high-quality studies met inclusion criteria. Most studies showed no change or slight improvement in mortality and complication rates after DHRs. Resident well-being was generally improved, but there was a perceived negative impact on education (knowledge acquisition, skills, and cognitive performance) following DHRs. Eleven high-quality studies assessed the impact of DHR interventions; all reported a neutral to positive impact. Seven high-quality studies assessed costs associated with DHRs and demonstrated an increase in hospital costs. The results of most studies that allow enough time for DHR interventions to take effect suggest a benefit to patient safety and resident well-being, but the effect on the quality of training remains unknown. Additional methodologically sound studies on the impact of DHRs are necessary. Priorities for future research include approaches to optimizing education and clinical proficiency and studies on the effect of intervention strategies on both education and patient safety. Such studies will provide additional information to help improve duty hours policies.

  20. Providing high-quality care in primary care settings: how to make trade-offs.

    Beaulieu, Marie-Dominique; Geneau, Robert; Del Grande, Claudio; Denis, Jean-Louis; Hudon, Eveline; Haggerty, Jeannie L; Bonin, Lucie; Duplain, Réjean; Goudreau, Johanne; Hogg, William

    2014-05-01

    To gain a deeper understanding of how primary care (PC) practices belonging to different models manage resources to provide high-quality care. Multiple-case study embedded in a cross-sectional study of a random sample of 37 practices. Three regions of Quebec. Health care professionals and staff of 5 PC practices. Five cases showing above-average results on quality-of-care indicators were purposefully selected to contrast on region, practice size, and PC model. Data were collected using an organizational questionnaire; the Team Climate Inventory, which was completed by health care professionals and staff; and 33 individual interviews. Detailed case histories were written and thematic analysis was performed. The core common feature of these practices was their ongoing effort to make trade-offs to deliver services that met their vision of high-quality care. These compromises involved the same 3 areas, but to varying degrees depending on clinic characteristics: developing a shared vision of high-quality care; aligning resource use with that vision; and balancing professional aspirations and population needs. The leadership of the physician lead was crucial. The external environment was perceived as a source of pressure and dilemmas rather than as a source of support in these matters. Irrespective of their models, PC practices' pursuit of high-quality care is based on a vision in which accessibility is a key component, balanced by appropriate management of available resources and of external environment expectations. Current PC reforms often create tensions rather than support PC practices in their pursuit of high-quality care. Copyright© the College of Family Physicians of Canada.

  1. Isolation of high-quality total RNA from leaves of Myrciaria dubia "CAMU CAMU".

    Gómez, Juan Carlos Castro; Reátegui, Alina Del Carmen Egoavil; Flores, Julián Torres; Saavedra, Roberson Ramírez; Ruiz, Marianela Cobos; Correa, Sixto Alfredo Imán

    2013-01-01

    Myrciaria dubia is a main source of vitamin C for people in the Amazon region. Molecular studies of M. dubia require high-quality total RNA from different tissues. So far, no protocols have been reported for total RNA isolation from leaves of this species. The objective of this research was to develop protocols for extracting high-quality total RNA from leaves of M. dubia. Total RNA was purified following two modified protocols developed for leaves of other species (by Zeng and Yang, and by Reid et al.) and one modified protocol developed for fruits of the studied species (by Silva). Quantity and quality of purified total RNA were assessed by spectrophotometric and electrophoretic analysis. Additionally, quality of total RNA was evaluated with reverse-transcription polymerase chain reaction (RT-PCR). With these three modified protocols we were able to isolate high-quality RNA (A260nm/A280nm >1.9 and A260nm/A230nm >2.0). Highest yield was produced with the Zeng and Yang modified protocol (384±46µg ARN/g fresh weight). Furthermore, electrophoretic analysis showed the integrity of isolated RNA and the absence of DNA. Another proof of the high quality of our purified RNA was the successful cDNA synthesis and amplification of a segment of the M. dubia actin 1 gene. We report three modified protocols for isolation total RNA from leaves of M. dubia. The modified protocols are easy, rapid, low in cost, and effective for high-quality and quantity total RNA isolation suitable for cDNA synthesis and polymerase chain reaction.

  2. Globalization and Cross-Border Labor Organizing

    Ralph Armbruster

    2015-08-01

    Full Text Available The globalization of the world economy has opened up new possibilities for cross-border labor organizing. In fact, several U.S. unions are working together with unions from Mexico, Honduras, Guatemala, the Dominican Republic, Japan, South Korea, and many European nations. For example, over the last several years, UNITE (Union of Needletrades, Industrial, and Textile Employees, the AFL-CIO, and the international garment workers trade secretariat have worked directly with maquiladora workers in Honduras and the Dominican Republic. These efforts led to the formation of several labor unions and the first contracts ever negotiated in the maquiladoras in the Dominican Republic. In addition, labor rights and solidarity organizations, like the Campaign for Labor Rights, Witness for Peace, and the US/Guatemala Labor Education Project (US/GLEP, along with many other groups, have also played key roles in the formation of maquiladora unions in Nicaragua and Guatemala.

  3. Construction inspection manual of procedures

    2009-01-01

    This manual provides highway construction personnel with relevant, practical information in order to perform accurate inspections and provide relevant construction procedural information for the various roadway and structures items of work. It is the...

  4. Are Manual Typewriters Becoming Obsolete?

    Johnston, Jean

    1976-01-01

    A University of Akron survey of the Akron area revealed that the general trend is for large companies to use manual typewriters in their business offices. Implications for typewriting instruction are discussed. (JT)

  5. Manual on indoor air quality

    Diamond, R.C.; Grimsrud, D.T.

    1983-12-01

    This reference manual was prepared to assist electric utilities in helping homeowners, builders, and new home buyers to understand a broad range of issues related to indoor air quality. The manual is directed to technically knowledgeable persons employed by utility companies - the customer service or marketing representative, applications engineer, or technician - who may not have specific expertise in indoor air quality issues. In addition to providing monitoring and control techniques, the manual summarizes the link between pollutant concentrations, air exchange, and energy conservation and describes the characteristics and health effects of selected pollutants. Where technical information is too lengthy or complex for inclusion in this volume, reference sources are given. Information for this manual was gathered from technical studies, manufacturers' information, and other materials from professional societies, institutes, and associations. The aim has been to provide objective technical and descriptive information that can be used by utility personnel to make informed decisions about indoor air quality issues

  6. Surface Environmental Surveillance Procedures Manual

    Hanf, RW; Dirkes, RL

    1990-02-01

    This manual establishes the procedures for the collection of environmental samples and the performance of radiation surveys and other field measurements. Responsibilities are defined for those personnel directly involved in the collection of samples and the performance of field measurements.

  7. Manual on indoor air quality

    Diamond, R.C.; Grimsrud, D.T.

    1983-12-01

    This reference manual was prepared to assist electric utilities in helping homeowners, builders, and new home buyers to understand a broad range of issues related to indoor air quality. The manual is directed to technically knowledgeable persons employed by utility companies - the customer service or marketing representative, applications engineer, or technician - who may not have specific expertise in indoor air quality issues. In addition to providing monitoring and control techniques, the manual summarizes the link between pollutant concentrations, air exchange, and energy conservation and describes the characteristics and health effects of selected pollutants. Where technical information is too lengthy or complex for inclusion in this volume, reference sources are given. Information for this manual was gathered from technical studies, manufacturers' information, and other materials from professional societies, institutes, and associations. The aim has been to provide objective technical and descriptive information that can be used by utility personnel to make informed decisions about indoor air quality issues.

  8. Transportation security personnel training manual

    1978-11-01

    This volume is the instructor's manual for the training of SNM guards. Covered are: self-defense, arrest authority, civil liability, report writing, stress, tactics, and situational training scenarios

  9. Transportation security personnel training manual

    1978-11-01

    Objective of this manual is to train security personnel to protect special nuclear materials and nuclear facilities against theft and sabotage as required by 10 CFR Part 73. This volume contains the introduction and rationale

  10. The operation and maintenance manual

    Klein, W.; Krotil, H.; Stoll, A.

    1975-01-01

    The Operating Manual is one of many technical documents which the nuclear power plant operator needs for ensuring safe operation. For the operating staff, however, there is only one document, namely the Operating Manual. It contains, appropriately arranged, the necessary system and other diagrams, drawings, lists, licensing documents and similar material, which are necessary for understanding the design, for testing, for obtaining the operating licence and for the operation of individual systems and of the entire plant. (orig./RW) [de

  11. State Energy Program Operations Manual

    Office of Building Technology, State and Community Programs

    1999-03-17

    The State Energy Program Operations Manual is a reference tool for the states and the program officials at the U.S. Department of Energy's Office of Building Technology, State and Community Programs and Regional Support Offices as well as State Energy Offices. The Manual contains information needed to apply for and administer the State Energy Program, including program history, application rules and requirements, and program administration and monitoring requirements.

  12. Child Labor: A Forgotten Focus for Child Welfare.

    Otis, Jack; Pasztor, Eileen Mayers; McFadden, Emily Jean

    2001-01-01

    Discusses the worldwide problem of child labor and efforts to advocate for the welfare of these impoverished children. Considers factors that contribute to the continued use of child labor and the resistance of these labor practices to reform. Discusses child labor in the United States, and urges public advocacy for labor reform within child…

  13. FADIGA LABORAL EM TRABALHADORES RURAIS

    Karla Nayalle de Souza Oliveira

    2013-01-01

    Full Text Available El objetivo fue identificar la existencia de estrés laboral de trabajadores rurales del Bom Jesus-PI, Brasil. Estudio descriptivo exploratorio llevado acabo entre abril y junio de 2011, con 47 trabajadores. Recopilación de datos se realizó por instrumento para evaluación del estrés llamado Cuestionario Bipolar y guión de entrevista semiestructurada con la caracterización del perfil sociodemográfico y de las condiciones de trabajo. Se tabularon los cuestionarios, que se compararon por Chi-Cuadrado con 95% de confiabilidad. Se realizó para diferenciación o clasificación de las respuestas analizadas y observación del comportamiento dentro de grupos el análisis de componentes principales y agrupaciones. El estrés es común en el medio rural, principalmente en forma de estrés intenso, debido a la exposición a condiciones insalubres para el trabajador. Aunque no se identifican, directamente, sus factores desencadenantes, por lo tanto, sus medidas de prevención.

  14. Child labor in the US

    Wegmann David

    2003-01-01

    Full Text Available This paper presents a report on child labor in the U.S. that reviewed the positive and negative aspects of work for youth. Working was found to provide young people with valuable lessons about responsibility, punctuality, interacting with people and learning about money management, increasing self-esteem and helping them become independent and skilled. Research findings suggested that working during high school may contribute to increased rates of employment and better wages up to a decade after high school completion. Research concerning the hazards associated with work indicated that, each year, tens of thousands of young people are seen in hospital emergency departments for work-related injuries, hundreds require hospitalization, and more than 70 die of work-related injuries. Long work hours during the school year were associated with problem behaviors. The report points out some important questions: updating regulations on allowable work hours, eliminating less stringent regulation of agricultural work, revising outdated rules against hazardous work, developing and implementing a comprehensive plan for monitoring the injuries, illnesses, and hazards, building workplace health and safety information into school-based programs, and developing criteria for designating "commendable workplaces for youth."

  15. [Fifty years of population growth and absorbing manual labor in Brazil, 1950-2000].

    Paiva, P D

    1986-01-01

    The economically active population has grown rapidly in Brazil, resulting either from population growth or increased female participation in the work force. This rhythm of growth will continue at least until the end of this century. The authors suggest that the impact of the recent decline in fertility will be moderate and will only affect the younger age groups. Despite the rapid growth of employment in the processing industry, the relative size of the so-called informal sector has remained stable since 1950. It is further predicted that, given the economically active population's rate of growth and the decrease in employment in agriculture, there will be a great demand for urban employment in the next 20 years.

  16. [Changes in labor market participation of older employees in Germany: the perspective of labor market research].

    Brussig, M

    2009-08-01

    For many years, Germany has been regarded in international comparisons as an example of a generous early retirement culture, resulting in a low labor market participation of older employees. Recently, however, employment rates of older employees have increased remarkably. Reasons are the demographic structure of older persons in Germany, a long-term trend of increasing female labor market participation, and reforms in labor-market policies and pension policies during the last 10 years. Despite an increasing labor market participation of older employees, traditional labor market risks for older persons partly remained, but some new risks evolved as well. Therefore, social differentiation among older employees increased.Although detailed macro descriptions exist, the causes of labor market developments cannot be fully understood with cross-sectional data alone. An important stimulus is to be expected from individual longitudinal data which reflect employment histories and labor market transitions such as employment exit and retirement.

  17. Delivering high quality hip fracture rehabilitation: the perspective of occupational and physical therapy practitioners.

    Leland, Natalie E; Lepore, Michael; Wong, Carin; Chang, Sun Hwa; Freeman, Lynn; Crum, Karen; Gillies, Heather; Nash, Paul

    2018-03-01

    The majority of post-acute hip fracture rehabilitation in the US is delivered in skilled nursing facilities (SNFs). Currently, there are limited guidelines that equip occupational and physical therapy practitioners with a summary of what constitutes evidence-based high quality rehabilitation. Thus, this study aimed to identify rehabilitation practitioners' perspectives on the practices that constitute high quality hip fracture rehabilitation. Focus groups were conducted with 99 occupational and physical therapy practitioners working in SNFs in southern California. Purposive sampling of facilities was conducted to capture variation in key characteristics known to impact care delivery for this patient population (e.g., financial resources, staffing, and patient case-mix). Questions aimed to elicit practitioners' perspectives on high quality hip fracture rehabilitation practices. Each session was audio-recorded and transcribed. Data were systematically analyzed using a modified grounded theory approach. Seven themes emerged: objectives of care; first 72 h; positioning, pain, and precautions; use of standardized assessments; episode of care practices; facilitating insight into progress; and interdisciplinary collaboration. Clinical guidelines are critical tools to facilitate clinical decision-making and achieve desired patient outcomes. The findings of this study highlight the practitioners' perspective on what constitutes high quality hip fracture rehabilitation. This work provides critical information to advance the development of stakeholder-driven rehabilitation clinical guidelines. Future research is needed to verify the findings from other stakeholders (e.g., patients), ensure the alignment of our findings with current evidence, and develop measures for evaluating their delivery and relationship to desired outcomes. Implications for Rehabilitation This study highlights occupational and physiotherapy therapy practitioners' perspectives on the cumulative best

  18. ACT Plan: Technical Manual. 2013/2014

    ACT, Inc., 2013

    2013-01-01

    This manual contains information about the American College Test (ACT) Plan® program. The principal focus of this manual is to document the Plan program's technical adequacy in light of its intended purposes. This manual supersedes the 2011 edition. The content of this manual responds to requirements of the testing industry as established in the…

  19. The Vulnerability of the Regional Labor Market

    Mihail Rarița

    2015-05-01

    Full Text Available In the past decades, the European and Romanian economies have been strongly affected by major changes which have influenced also the labor market: the alert pace of the international economic integration, the creation of work division in order to protect some economic sectors, the accelerated development and implementation of new technologies, the increase of the demographic aging trends. In the context of the amplified labor force crisis, the present paper will analyze some dysfunctions which have affected especially the regional labor market: the chronic unemployment, the mismatch between the demand and the offer of jobs and the localized consequences of the labor migration. The approach on these aspects was done in a vaster context intended to analyze the regional labor market of Galati and Braila, starting from the existent imbalances on these markets. The present paper starts from the premise that the proposal of some measurements which should lead to a balancing of the regional working market, must take into account the way in which the direct actors involved are defining these obstacles and opportunities for professional (reinsertion. In order to highlight both the opinions and the perceptions of the participants on the labor market, the research had to take place on two levels: among the groups with a difficult position on the labor market and among the employers.

  20. Marine Corps Contract Supply Model for High Quality Male Enlistment Contracts at the Recruiting Sub Station Level

    Welsh, Brian K

    2008-01-01

    .... This research develops contract production models at the Recruiting Sub Station level to estimate the effects of local economic conditions, demographics, and recruiting resources on new high quality...

  1. Medications for Pain Relief during Labor and Delivery

    ... FAQ086 LABOR, DELIVERY, AND POSTPARTUM CARE Medications for Pain Relief During Labor and Delivery • What types of medications for pain relief are used during labor and delivery? • What are ...

  2. Labor Market Size and Unemployment Duration: A Theoretical Note

    Peter Schaeffer; Tesfa Gebremedhin

    2004-01-01

    When job prospects are uncertain, labor market size matters even when labor and jobs, respectively, are homogenous. The expected unemployment duration and its standard deviation may then differ systematically with labor market size.

  3. 75 FR 4271 - Labor Organization Officer and Employee Reports

    2010-01-27

    ... DEPARTMENT OF LABOR Office of Labor-Management Standards 29 CFR Part 404 Labor Organization Officer and Employee Reports CFR Correction In Title 29 of the Code of Federal Regulations, Parts 100 to 499, revised as [[Page 4272

  4. Attempt at cloning high-quality goldfish breed 'Ranchu' by fin-cultured cell nuclear transplantation.

    Tanaka, Daisuke; Takahashi, Akito; Takai, Akinori; Ohta, Hiromi; Ueno, Koichi

    2012-02-01

    The viability of ornamental fish culture relies on the maintenance of high-quality breeds. To improve the profitability of culture operations we attempted to produce cloned fish from the somatic nucleus of the high-quality Japanese goldfish (Carassius auratus auratus) breed 'Ranchu'. We transplanted the nucleus of a cultured fin-cell from an adult Ranchu into the non-enucleated egg of the original goldfish breed 'Wakin'. Of the 2323 eggs we treated, 802 underwent cleavage, 321 reached the blastula stage, and 51 reached the gastrula stage. Two of the gastrulas developed until the hatching stage. A considerable number of nuclear transplants retained only the donor nucleus. Some of these had only a 2n nucleus derived from the same donor fish. Our results provide insights into the process of somatic cell nuclear transplantation in teleosts, and the cloning of Ranchu.

  5. (-201) β-Gallium oxide substrate for high quality GaN materials

    Roqan, Iman S.

    2015-03-13

    (-201) oriented β-Ga2O3 has the potential to be used as a transparent and conductive substrate for GaN-growth. The key advantages of Ga2O3 are its small lattice mismatches (4.7%), appropriate structural, thermal and electrical properties and a competitive price compared to other substrates. Optical characterization show that GaN layers grown on (-201) oriented β-Ga2O3 are dominated by intense bandedge emission with a high luminescence efficiency. Atomic force microscopy studies show a modest threading dislocation density of ~108 cm-2, while complementary Raman spectroscopy indicates that the GaN epilayer is of high quality with slight compressive strain. Room temperature time-findings suggest that the limitation of the photoluminescence lifetime (~500 ps) is due to nonradiative recombination arising from threading dislocation. Therefore, by optimizing the growth conditions, high quality material with significant optical efficiency can be obtained.

  6. A design technique of low cost but high quality peak stretcher

    Lo, H Y; Su, C S; Hsu, J Y; Wang, L

    1981-03-01

    This paper presents the design of low cost but high quality pulse peak stretcher incorporated with a LSI of 12 bit ADC and SKD-85 microcomputer. The conflict between the capacitor high charging speed and longer holding time for realizing a high quality stretcher is discussed and solved. For a lager number of channels available in a dual ramp Wilkinson-type ADC, two-stage stretchers connected in series are designed. The first stage is a fast-discharge to keep the output stretched pulse follow-up the input quickly and the second-stage (main stretcher) is a slow-discharge to keep the transient of the circuit minimum. Both of these two peak stretchers are described and the experiment results are photographically recorded.

  7. High quality atomically thin PtSe2 films grown by molecular beam epitaxy

    Yan, Mingzhe; Wang, Eryin; Zhou, Xue; Zhang, Guangqi; Zhang, Hongyun; Zhang, Kenan; Yao, Wei; Lu, Nianpeng; Yang, Shuzhen; Wu, Shilong; Yoshikawa, Tomoki; Miyamoto, Koji; Okuda, Taichi; Wu, Yang; Yu, Pu; Duan, Wenhui; Zhou, Shuyun

    2017-12-01

    Atomically thin PtSe2 films have attracted extensive research interests for potential applications in high-speed electronics, spintronics and photodetectors. Obtaining high quality thin films with large size and controlled thickness is critical. Here we report the first successful epitaxial growth of high quality PtSe2 films by molecular beam epitaxy. Atomically thin films from 1 ML to 22 ML have been grown and characterized by low-energy electron diffraction, Raman spectroscopy and x-ray photoemission spectroscopy. Moreover, a systematic thickness dependent study of the electronic structure is revealed by angle-resolved photoemission spectroscopy (ARPES), and helical spin texture is revealed by spin-ARPES. Our work provides new opportunities for growing large size single crystalline films to investigate the physical properties and potential applications of PtSe2.

  8. Recent developments in high-quality drying of vegetables, fruits, and aquatic products.

    Zhang, Min; Chen, Huizhi; Mujumdar, Arun S; Tang, Juming; Miao, Song; Wang, Yuchuan

    2017-04-13

    Fresh foods like vegetables, fruits, and aquatic products have high water activity and they are highly heat-sensitive and easily degradable. Dehydration is one of the most common methods used to improve food shelf-life. However, drying methods used for food dehydration must not only be efficient and economic but also yield high-quality products based on flavor, nutrients, color, rehydration, uniformity, appearance, and texture. This paper reviews some new drying technologies developed for dehydration of vegetables, fruits, and aquatic products. These include: infrared drying, microwave drying, radio frequency drying, electrohydrodynamic drying, etc., as well as hybrid drying methods combining two or more different drying techniques. A comprehensive review of recent developments in high-quality drying of vegetables, fruits and aquatic products is presented and recommendations are made for future research.

  9. Formation of a high quality electron beam using photo cathode RF electron gun

    Washio, Masakazu

    2000-01-01

    Formation of a high quality electron beam using photo cathode RF electron gun is expected for formation of a next generation high brilliant X-ray beam and a source for electron and positron collider. And, on a field of material science, as is possible to carry out an experiment under ultra short pulse and extremely high precision in time, it collects large expectation. Recently, formation of high quality beam possible to develop for multi directions and to use by everyone in future has been able to realize. Here were explained on electron beam source, principle and component on RF electron gun, working features on RF gun, features and simulation of RF gun under operation, and some views in near future. (G.K.)

  10. Selection of process parameters for producing high quality defatted sesame flour at pilot scale.

    Manikantan, M R; Sharma, Rajiv; Yadav, D N; Gupta, R K

    2015-03-01

    The present work was undertaken to study the effect of pearling duration, soaking time, steaming duration and drying temperature on the quality of sesame seeds and mechanically extracted partially defatted sesame cake. On the basis of quality attributes i.e. high protein, low crude fibre, low residual oil and low oxalic acid, the optimum process parameters were selected. The combination of 20 min of pearling duration, 15 min of soaking, 15 min of steaming at 100 kPa pressure and drying at 50 °C yielded high quality partially defatted protein rich sesame flour as compared to untreated defatted sesame flour. The developed high quality partially defatted protein rich sesame flour may be used in various food applications as a vital ingredient to increase the nutritional significance of the prepared foodstuffs.

  11. The Barriers to High-Quality Inpatient Pain Management: A Qualitative Study.

    Lin, Richard J; Reid, M Carrington; Liu, Lydia L; Chused, Amy E; Evans, Arthur T

    2015-09-01

    The current literature suggests deficiencies in the quality of acute pain management among general medical inpatients. The aim of this qualitative study is to identify potential barriers to high-quality acute pain management among general medical inpatients at an urban academic medical center during a 2-year period. Data are collected using retrospective chart reviews, survey questionnaires, and semistructured, open-ended interviews of 40 general medical inpatients who have experienced pain during their hospitalization. Our results confirm high prevalence and disabling impacts of pain and significant patient- and provider-related barriers to high-quality acute pain management. We also identify unique system-related barriers such as time delay and pain management culture. Efforts to improve the pain management experience of general medical inpatients will need to address all these barriers. © The Author(s) 2014.

  12. Active labor market policies and crime

    Tranæs, Torben

    2015-01-01

    Active labor market programs continue to receive high priority in wealthy countries despite the fact that the benefits appear small relative to the costs. This apparent discrepancy suggests that the programs may have a broader purpose than simply increasing employment—for instance, preventing anti......-social behavior such as crime. Indeed, recent evidence shows that participation in active labor market programs reduces crime among unemployed young men. The existence of such effects could explain why it is the income-redistributing countries with greater income equality that spend the most on active labor...... market programs....

  13. Child Labor in Africa: A Comparative Study

    Canagarajah, Sudharshan; Nielsen, Helena Skyt

    2001-01-01

    This paper analyzes the determinants of child labor in Africa as inferred from recent empirical studies. The empirical analysis is based upon five country studies undertaken in three different African countries, namely Côte d'Ivoire, Ghana, and Zambia. Some support is found for the popular belief...... of poverty as a determinant of child labor, however other determinants are of similar importance. Among school costs, transportation costs have the greatest effect on child labor and school attendance, whereas the hypothesis of imperfect capital markets and that of household composition generally find some...

  14. Child Labor in Africa: A Comparative Study

    Nielsen, Helena Skyt; Canagarajah, Sudharshan

    1999-01-01

    This paper analyzes the determinants of child labor in Africa as inferred from recent empirical studies. The empirical analysis is based upon five country studies undertaken in three different African countries, namely Côte d'Ivoire, Ghana, and Zambia. Some support is found for the popular belief...... of poverty as a determinant of child labor, however other determinants are of similar importance. Among school costs, transportation costs have the greatest effect on child labor and school attendance, whereas the hypothesis of imperfect capital markets and that of household composition generally find some...

  15. Production of high-quality polydisperse construction mixes for additive 3D technologies.

    Gerasimov, M. D.; Brazhnik, Yu V.; Gorshkov, P. S.; Latyshev, S. S.

    2018-03-01

    The paper describes a new design of a mixer allowing production of high quality polydisperse powders, used in additive 3D technologies. A new principle of dry powder particle mixing is considered, implementing a possibility of a close-to-ideal distribution of such particles in common space. A mathematical model of the mixer is presented, allowing evaluating quality indicators of the produced mixture. Experimental results are shown and rational values of process parameters of the mixer are obtained.

  16. Project outline of high quality electron beam generation at Waseda University

    Washio, M.; Hama, Y.; Kashiwagi, S.; Kuroda, R.; Kobuki, T. [Waseda Univ., Advanced Research Institute for Science and Engineering, Shinjuku, Tokyo (Japan); Hirose, T. [Tokyo Metropolitan Univ. (Japan). Dept. of Physics

    2000-03-01

    High quality electron beam generation project has been started at Waseda University under the grant of Ministry of Education, named High-Tech Research Center Project. In the project, we will install a laser photo-cathode RF Gun system with 1.6 accelerating structure cells of s-band and a stabilized RF power source. This RF Gun is expected to produce single electron bunch up to 1 or 2nC with around 10ps pulse duration. (author)

  17. Project outline of high quality electron beam generation at Waseda University

    Washio, M.; Hama, Y.; Kashiwagi, S.; Kuroda, R.; Kobuki, T.; Hirose, T.

    2000-01-01

    High quality electron beam generation project has been started at Waseda University under the grant of Ministry of Education, named High-Tech Research Center Project. In the project, we will install a laser photo-cathode RF Gun system with 1.6 accelerating structure cells of s-band and a stabilized RF power source. This RF Gun is expected to produce single electron bunch up to 1 or 2nC with around 10ps pulse duration. (author)

  18. Fabrication of high quality GaN nanopillar arrays by dry and wet chemical etching

    Paramanik, Dipak; Motayed, Abhishek; King, Matthew; Ha, Jong-Yoon; Kryluk, Sergi; Davydov, Albert V.; Talin, Alec

    2013-01-01

    We study strain relaxation and surface damage of GaN nanopillar arrays fabricated using inductively coupled plasma (ICP) etching and post etch wet chemical treatment. We controlled the shape and surface damage of such nanopillar structures through selection of etching parameters. We compared different substrate temperatures and different chlorine-based etch chemistries to fabricate high quality GaN nanopillars. Room temperature photoluminescence and Raman scattering measurements were carried ...

  19. Teaching Surgical Procedures with Movies: Tips for High-quality Video Clips

    Jacquemart, Mathieu; Bouletreau, Pierre; Breton, Pierre; Mojallal, Ali; Sigaux, Nicolas

    2016-01-01

    Summary: Video must now be considered as a precious tool for learning surgery. However, the medium does present production challenges, and currently, quality movies are not always accessible. We developed a series of 7 surgical videos and made them available on a publicly accessible internet website. Our videos have been viewed by thousands of people worldwide. High-quality educational movies must respect strategic and technical points to be reliable.

  20. Teaching Surgical Procedures with Movies: Tips for High-quality Video Clips.

    Jacquemart, Mathieu; Bouletreau, Pierre; Breton, Pierre; Mojallal, Ali; Sigaux, Nicolas

    2016-09-01

    Video must now be considered as a precious tool for learning surgery. However, the medium does present production challenges, and currently, quality movies are not always accessible. We developed a series of 7 surgical videos and made them available on a publicly accessible internet website. Our videos have been viewed by thousands of people worldwide. High-quality educational movies must respect strategic and technical points to be reliable.